WorldWideScience

Sample records for black liquor recovery

  1. Black liquor and the hangover effect: fish assemblage recovery dynamics following a pulse disturbance

    OpenAIRE

    Kyle R. Piller; Geheber, Aaron D

    2015-01-01

    Anthropogenic perturbations impact aquatic systems causing wide-ranging responses, from assemblage restructuring to assemblage recovery. Previous studies indicate the duration and intensity of disturbances play a role in the dynamics of assemblage recovery. In August 2011, the Pearl River, United States, was subjected to a weak black liquor spill from a paper mill which resulted in substantial loss of fish in a large stretch of the main channel. We quantified resilience and recovery of fish a...

  2. Mill Integration-Pulping, Stream Reforming and Direct Causticization for Black Liquor Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Adriaan van Heiningen

    2007-06-30

    MTCI/StoneChem developed a steam reforming, fluidized bed gasification technology for biomass. DOE supported the demonstration of this technology for gasification of spent wood pulping liquor (or 'black liquor') at Georgia-Pacific's Big Island, Virginia mill. The present pre-commercial R&D project addressed the opportunities as well as identified negative aspects when the MTCI/StoneChem gasification technology is integrated in a pulp mill production facility. The opportunities arise because black liquor gasification produces sulfur (as H{sub 2}S) and sodium (as Na{sub 2}CO{sub 3}) in separate streams which may be used beneficially for improved pulp yield and properties. The negative aspect of kraft black liquor gasification is that the amount of Na{sub 2}CO{sub 3} which must be converted to NaOH (the so called causticizing requirement) is increased. This arises because sulfur is released as Na{sub 2}S during conventional kraft black liquor recovery, while during gasification the sodium associated Na{sub 2}S is partly or fully converted to Na{sub 2}CO{sub 3}. The causticizing requirement can be eliminated by including a TiO{sub 2} based cyclic process called direct causticization. In this process black liquor is gasified in the presence of (low sodium content) titanates which convert Na{sub 2}CO{sub 3} to (high sodium content) titanates. NaOH is formed when contacting the latter titanates with water, thereby eliminating the causticizing requirement entirely. The leached and low sodium titanates are returned to the gasification process. The project team comprised the University of Maine (UM), North Carolina State University (NCSU) and MTCI/ThermoChem. NCSU and MTCI are subcontractors to UM. The principal organization for the contract is UM. NCSU investigated the techno-economics of using advanced pulping techniques which fully utilize the unique cooking liquors produced by steam reforming of black liquor (Task 1). UM studied the kinetics and

  3. Black liquor combustion validated recovery boiler modeling, five-year report

    Energy Technology Data Exchange (ETDEWEB)

    Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

    1996-08-01

    The objective of this project was to develop a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The project originated in October 1990 and was scheduled to run for four years. At that time, there was considerable emphasis on developing accurate predictions of the physical carryover of macroscopic particles of partially burnt black liquor and smelt droplets out of the furnace, since this was seen as the main cause of boiler plugging. This placed a major emphasis on gas flow patterns within the furnace and on the mass loss rates and swelling and shrinking rates of burning black liquor drops. As work proceeded on developing the recovery boiler furnace model, it became apparent that some recovery boilers encounter serious plugging problems even when physical carryover was minimal. After the original four-year period was completed, the project was extended to address this issue. The objective of the extended project was to improve the utility of the models by including the black liquor chemistry relevant to air emissions predictions and aerosol formation, and by developing the knowledge base and computational tools to relate furnace model outputs to fouling and plugging of the convective sections of the boilers. The work done to date includes CFD model development and validation, acquisition of information on black liquor combustion fundamentals and development of improved burning models, char bed model development, and model application and simplification.

  4. Black liquor combustion validated recovery boiler modeling: Final year report. Volume 4 (Appendix IV)

    Energy Technology Data Exchange (ETDEWEB)

    Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

    1998-08-01

    This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 4 contains the following appendix sections: Radiative heat transfer properties for black liquor combustion -- Facilities and techniques and Spectral absorbance and emittance data; and Radiate heat transfer determination of the optical constants of ash samples from kraft recovery boilers -- Calculation procedure; Computation program; Density determination; Particle diameter determination; Optical constant data; and Uncertainty analysis.

  5. Modeling and field observations of char bed processes in black liquor recovery boilers

    Energy Technology Data Exchange (ETDEWEB)

    Engblom, M.

    2010-07-01

    The char bed plays an important role in kraft black liquor combustion. Stable operation of the char bed promotes efficient and safe operation of the black liquor recovery boiler. It also plays a crucial role in the recovery of the pulping chemicals. Char bed operation involves controlling the char bed size and shape. Mathematical modeling based on computational fluid dynamics (CFD) haas been applied to recovery boilers for increased insights into the recovery furnace processes and to aid in the design of new boilers. So far, all CED-based char bed models reported in literature have used a fixed bed shape. This imposes restrictions on simulation of char bed burning by not considering inherently occurring changes in bed shape. In this thesis, a CED -based recovery furnace model is further developed to predict changes in bed shape. The new model is used in simulation of existing recovery boilers. The predictions of bed shape are compared with observations from real boilers. The furnace model is capable of correctly simulating the overall response of the char bed size to operational changes. This confirms the current quantitative overall understanding of char bed burning. In addition to modeling, visual observations of the char bed processes were made in this work. The observations provide validation data concerning the physical behavior of the char bed, and the findings from the observations can be used in further development of char bed models. Modeling and simulations of fundamental laboratory scale char bed experiments reported in literature are also carried out. The simulations complement the experimental data by providing detailed insights into gas phase reactions that can occur inside the gas boundary layer above a char bed. (orig.)

  6. Kraft black liquor delivery systems

    Energy Technology Data Exchange (ETDEWEB)

    Adams, T.N.; Empie, H.L.; Obuskovic, N.; Spielbauer, T.M.

    1990-02-01

    Improvement of spray nozzles for black liquor injection into kraft recovery furnaces is expected to result from obtaining a controlled, well-defined droplet size distribution. Work this year has centered on defining the capabilities of commercial black liquor nozzles currently in use. Considerations of the observed mechanism of droplet formation suggest a major revision is needed in the theory of how droplets form from these nozzles. High resolution, high sensitivity video has been shown to be superior to flash x-ray as a technique for measuring the droplet size distribution as well as the formation history. An environmentally sound spray facility capable of spraying black liquor at temperatures up to normal firing conditions is being constructed before data acquisition continues. Preliminary correlations have been developed between liquor properties, nozzle design, and droplet size. Three aspects of nozzle design have been investigated: droplet size distribution, fluid sheet thickness, and flow and pressure drop characteristics. The standard deviation about the median droplet size for black liquor is nearly the same as the for a wide variety of other fluids and nozzle types. Preliminary correlation for fluid sheet thickness on the plate of a splashplate nozzle show the strong similarities of black liquor to other fluids. The flow and pressure drop characteristic of black liquor nozzle, follow a simple two-term relationship similar to other flow devices. This means that in routine mill operation of black liquor nozzles only the fluid acceleration in the nozzle is important, viscous losses are quiet small. 21 refs., 53 figs., 10 tabs.

  7. Energy considerations for steam plasma gasification of black liquor and chemical recovery

    Energy Technology Data Exchange (ETDEWEB)

    Grandy, J.D.; Kong, P.C.

    1995-10-01

    This paper investigates the energy economics of using a hybrid steam plasma process to gasify black liquor. In the pulp and paper industry, gasification is gaining credibility as an incremental method to supplement the standard Kraft process, which bums the black liquor in large furnaces to recover energy and inorganic chemicals (sodium and sulfur) that are recycled back into the wood pulping process. This paper shows that despite the energy intensive nature of steam plasma processing, several fortuitous conditions arise that make it a viable technology for the gasification of black liquor.

  8. Cracking and Corrosion of Composite Tubes in Black Liquor Recovery Boiler Primary Air Ports

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, James R.; Singbeil, Douglas L.; Sarma, Gorti B.; Kish, Joseph R.; Yuan, Jerry; Frederick, Laurie A.; Choudhury, Kimberly A.; Gorog, J. Peter; Jetté, Francois R.; Hubbard, Camden R.; Swindeman, Robert W.; Singh, Prett M.; Maziasz, Phillip J.

    2006-10-01

    Black liquor recovery boilers are an essential part of kraft mills. Their design and operating procedures have changed over time with the goal of providing improved boiler performance. These performance improvements are frequently associated with an increase in heat flux and/or operating temperature with a subsequent increase in the demand on structural materials associated with operation at higher temperatures and/or in more corrosive environments. Improvements in structural materials have therefore been required. In most cases the alternate materials have provided acceptable solutions. However, in some cases the alternate materials have solved the original problem but introduced new issues. This report addresses the performance of materials in the tubes forming primary air port openings and, particularly, the problems associated with use of stainless steel clad carbon steel tubes and the solutions that have been identified.

  9. Combustion properties of Kraft Black Liquors

    Energy Technology Data Exchange (ETDEWEB)

    Frederick, W.J. Jr.; Hupa, M. (Aabo Akademi, Turku (Finland))

    1993-04-01

    In a previous study of the phenomena involved in the combustion of black liquor droplets a numerical model was developed. The model required certain black liquor specific combustion information which was then not currently available, and additional data were needed for evaluating the model. The overall objectives of the project reported here was to provide experimental data on key aspects of black liquor combustion, to interpret the data, and to put it into a form which would be useful for computational models for recovery boilers. The specific topics to be investigated were the volatiles and char carbon yields from pyrolysis of single black liquor droplets; a criterion for the onset of devolatilization and the accompanying rapid swelling; and the surface temperature of black liquor droplets during pyrolysis, combustion, and gasification. Additional information on the swelling characteristics of black liquor droplets was also obtained as part of the experiments conducted.

  10. Black liquor and the hangover effect: fish assemblage recovery dynamics following a pulse disturbance.

    Science.gov (United States)

    Piller, Kyle R; Geheber, Aaron D

    2015-06-01

    Anthropogenic perturbations impact aquatic systems causing wide-ranging responses, from assemblage restructuring to assemblage recovery. Previous studies indicate the duration and intensity of disturbances play a role in the dynamics of assemblage recovery. In August 2011, the Pearl River, United States, was subjected to a weak black liquor spill from a paper mill which resulted in substantial loss of fish in a large stretch of the main channel. We quantified resilience and recovery of fish assemblage structure in the impacted area following the event. We compared downstream (impacted) assemblages to upstream (unimpacted) assemblages to determine initial impacts on structure. Additionally, we incorporated historic fish collections (1988-2011) to examine impacts on assemblage structure across broad temporal scales. Based on NMDS, upstream and downstream sites generally showed similar assemblage structure across sample periods with the exception of the 2 months postdischarge, where upstream and downstream sites visually differed. Multivariate analysis of variance (PERMANOVA) indicated significant seasonal variation among samples, but found no significant interaction between impacted and unimpacted assemblages following the discharge event. However, multivariate dispersion (MVDISP) showed greater variance among assemblage structure following the discharge event. These results suggest that 2 months following the disturbance represent a time period of stochasticity in regard to assemblage structure dynamics, and this was followed by rapid recovery. We term this dynamic the "hangover effect" as it represents the time frame from the cessation of the perturbation to the assemblage's return to predisturbance conditions. The availability and proximity of tributaries and upstream refugia, which were not affected by the disturbance, as well as the rapid recovery of abiotic parameters likely played a substantial role in assemblage recovery. This study not only demonstrates

  11. Mechanical Design of Steel Tubing for Use in Black Liquor Recovery Boilers

    Energy Technology Data Exchange (ETDEWEB)

    Taljat, B.; Zacharaia, T.; Wang, X.; Kesier, J.; Swindeman, R.; Hubbard, C.

    1999-05-26

    Finite element models were developed for thermal-mechanical analysis of black liquor recovery boiler floor tubes. Residual stresses in boiler floors due to various manufacturing processes were analyzed. The modeling results were verified by X-ray and neutron diffraction measurements at room temperature on as-manufactured tubes as well as tubes after service. The established finite element models were then used to evaluate stress conditions during boiler operation. Using these finite element models, a parametric response surface study was performed to investigate the influence of material properties of the clad layer on stresses in the floor tubes during various boiler operating conditions, which yielded a generalized solution of stresses in the composite tube floors. The results of the study are useful for identifying the mechanisms of cracking experienced by recovery boilers. Based on the results of the response surface study, a recommendation was made for more suitable materials in terms of the analyzed mechanical properties. Alternative materials and manufacturing processes are being considered to improve the resistance to cracking and the in-service life of composite tubes. To avoid numerous FE stress-strain analyses of composite tubes made of different material combinations, a response surface study was performed that considered two essential mechanical properties of the clad material - coefficient of thermal expansion and yield stress - as independent variables. The response surface study provided a generalized solution of stresses in the floor in terms of the two selected parameters.

  12. High-solids black liquor firing in pulp and paper industry Kraft recovery boilers. Final report, Phase 1, Volume 1: Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Southards, W.T.; Clement, J.L.; McIlroy, R.A.; Tharp, M.R.; Verrill, C.L.; Wessell, R.A.

    1995-11-01

    This project is a multiple-phase effort to develop technologies to improve high-solids black liquor firing in pulp mill recovery boilers. The objectives are to develop a preliminary design of a recovery furnace simulator; evaluate the economics of high-solids; and delineate a project concept for evaluating candidate technologies to improve chemical recovery.

  13. Black liquor combustion validated recovery boiler modeling: Final year report. Volume 2 (Appendices I, section 5 and II, section 1)

    Energy Technology Data Exchange (ETDEWEB)

    Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

    1998-08-01

    This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 2 contains the last section of Appendix I, Radiative heat transfer in kraft recovery boilers, and the first section of Appendix II, The effect of temperature and residence time on the distribution of carbon, sulfur, and nitrogen between gaseous and condensed phase products from low temperature pyrolysis of kraft black liquor.

  14. Causticizing for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    Scott Sinquefeld; James Cantrell; Xiaoyan Zeng; Alan Ball; Jeff Empie

    2009-01-07

    The cost-benefit outlook of black liquor gasification (BLG) could be greatly improved if the smelt causticization step could be achieved in situ during the gasification step. Or, at a minimum, the increase in causticizing load associated with BLG could be mitigated. A number of chemistries have been proven successful during black liquor combustion. In this project, three in situ causticizing processes (titanate, manganate, and borate) were evaluated under conditions suitable for high temperature entrained flow BLG, and low temperature steam reforming of black liquor. The evaluation included both thermodynamic modeling and lab experimentation. Titanate and manganate were tested for complete direct causticizing (to thus eliminate the lime cycle), and borates were evaluated for partial causticizing (to mitigate the load increase associated with BLG). Criteria included high carbonate conversion, corresponding hydroxide recovery upon hydrolysis, non process element (NPE) removal, and economics. Of the six cases (three chemistries at two BLG conditions), only two were found to be industrially viable: titanates for complete causticizing during high temperature BLG, and borates for partial causticizing during high temperature BLG. These two cases were evaluated for integration into a gasification-based recovery island. The Larsen [28] BLG cost-benefit study was used as a reference case for economic forecasting (i.e. a 1500 tpd pulp mill using BLG and upgrading the lime cycle). By comparison, using the titanate direct causticizing process yielded a net present value (NPV) of $25M over the NPV of BLG with conventional lime cycle. Using the existing lime cycle plus borate autocausticizing for extra capacity yielded a NPV of $16M.

  15. Pulsed combustion process for black liquor gasification

    Energy Technology Data Exchange (ETDEWEB)

    Durai-Swamy, K.; Mansour, M.N.; Warren, D.W.

    1991-02-01

    The objective of this project is to test an energy efficient, innovative black liquor recovery system on an industrial scale. In the MTCI recovery process, black liquor is sprayed directly onto a bed of sodium carbonate solids which is fluidized by steam. Direct contact of the black liquor with hot bed solids promotes high rates of heating and pyrolysis. Residual carbon, which forms as a deposit on the particle surface, is then gasified by reaction with steam. Heat is supplied from pulse combustor resonance tubes which are immersed within the fluid bed. A portion of the gasifier product gas is returned to the pulse combustors to provide the energy requirements of the reactor. Oxidized sulfur species are partially reduced by reaction with the gasifier products, principally carbon monoxide and hydrogen. The reduced sulfur decomposed to solid sodium carbonate and gaseous hydrogen sulfide (H{sub 2}S). Sodium values are recovered by discharging a dry sodium carbonate product from the gasifier. MTCI's indirectly heated gasification technology for black liquor recovery also relies on the scrubbing of H{sub 2}S for product gases to regenerate green liquor for reuse in the mill circuit. Due to concerns relative to the efficiency of sulfur recovery in the MTCI integrated process, an experimental investigation was undertaken to establish performance and design data for this portion of the system.

  16. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Jun Wei

    2005-03-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  17. Proceedings of the black liquor research program review fourth meeting held July 28--30, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Emerson, D. B.; Whitworth, B. A.

    1987-10-01

    Research programs, presented at the black liquor review meeting are described. Research topics include the following: Cooperative Program in Kraft Recovery; Black Liquor Physical Properties; Viscosity of Strong Black Liquor; Ultrafiltration of Kraft Black Liquor; Molecular Weight Distribution of Kraft Lignin; Black Liquor Droplet Formation Project; Fundamental Studies of Black Liquor Combustion; Black Liquor Combustion Sensors; Flash X-ray Imagining of Black Liquor Sprays; Laser Induced Fluorescence For Process Control In The Pulp and Paper Industry; Recovery Boiler Optimization; Black Liquor Gasification and Use of the Products in Combined-Cycle Cogeneration; Black Liquor Steam Plasma Automization; The B and W Pyrosonic 2000R System; Monsteras Boiler Control System; and Cooperative Program Project Reviews. Individual projects are processed separately for the data bases.

  18. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  19. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Alireza Rezaie; Xiaoting Liang; Musa Karakus; Jun Wei

    2005-12-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected or developed that reacted with the gasifier environment to form protective surfaces in

  20. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  1. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  2. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-01-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  3. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-10-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected/developed that either react with the gasifier environment to form protective surfaces in

  4. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  5. Refractory for Black Liquor Gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    William L. Headrick Jr; Musa Karakus; Xiaoting Laing

    2005-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective

  6. Black liquor combustion validated recovery boiler modeling: Final year report. Volume 1 (Main text and Appendix I, sections 1--4)

    Energy Technology Data Exchange (ETDEWEB)

    Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

    1998-08-01

    This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 1 contains the main body of the report and the first 4 sections of Appendix 1: Modeling of black liquor recovery boilers -- summary report; Flow and heat transfer modeling in the upper furnace of a kraft recovery boiler; Numerical simulation of black liquor combustion; and Investigation of turbulence models and prediction of swirling flows for kraft recovery furnaces.

  7. Materials for the pulp and paper industry. Section 1: Development of materials for black liquor recovery boilers

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, J.R.; Hubbard, C.R.; Payzant, E.A. [Oak Ridge National Lab., TN (United States)] [and others

    1997-04-01

    Black liquor recovery boilers are essential components of kraft pulp and paper mills because they are a critical element of the system used to recover the pulping chemicals required in the kraft pulping process. In addition, the steam produced in these boilers is used to generate a significant portion of the electrical power used in the mill. Recovery boilers require the largest capital investment of any individual component of a paper mill, and these boilers are a major source of material problems in a mill. The walls and floors of these boilers are constructed of tube panels that circulate high pressure water. Molten salts (smelt) accumulate on the floor of recovery boilers, and leakage of water into the boiler can result in a violent explosion when the leaked water instantly vaporizes upon contacting the molten smelt. Because corrosion of the conventionally-used carbon steel tubing was found to be excessive in the lower section of recovery boilers, use of stainless steel/carbon steel co-extruded tubing was adopted for boiler walls to lessen corrosion and reduce the likelihood of smelt/water explosions. Eventually, this co-extruded or composite (as it is known in the industry) tubing was selected for use as a portion or all of the floor of recovery boilers, particularly those operating at pressures > 6.2 MPa (900 psi), because of the corrosion problems encountered in carbon steel floor tubes. Since neither the cause of the cracking nor an effective solution has been identified, this program was established to develop a thorough understanding of the degradation that occurs in the composite tubing used for walls and floors. This is being accomplished through a program that includes collection and review of technical reports, examination of unexposed and cracked tubes from boiler floors, computer modeling to predict residual stresses under operating conditions, and operation of laboratory tests to study corrosion, stress corrosion cracking, and thermal fatigue.

  8. Pyrolysis of Large Black Liquor Droplets

    Science.gov (United States)

    Bartkus, Tadas P.; Dietrich, Daniel L.; T'ien, James S.; Wessel, Richard A.

    2007-01-01

    This paper presents the results of experiments involving the pyrolysis of large black liquor droplets in the NASA KC-135 reduced gravity aircraft. The reduced gravity environment facilitated the study of droplets up to 9 mm in diameter extending the results of previous studies to droplet sizes that are similar to those encountered in recovery boilers. Single black liquor droplets were rapidly inserted into a 923 K oven. The primary independent variables were the initial droplet diameter (0.5 mm to 9 mm), the black liquor solids content (66.12% - 72.9% by mass), and the ambient oxygen mole fraction (0.0 - 0.21). Video records of the experiments provided size and shape of the droplets as a function of time. The results show that the particle diameter at the end of the drying stage (D(sub DRY)) increases linearly with the initial particle diameter (D(sub O)). The results further show that the ratio of the maximum swollen diameter (D(sub MAX)) to D(sub O) decreases with increasing D(sub O) for droplets with D(sub O) less than 4 mm. This ratio was independent of D(sub O) for droplets with D(sub O) greater than 4 mm. The particle is most spherical at the end of drying, and least spherical at maximum swollen size, regardless of initial sphericity and droplet size.

  9. Experiments on black liquor splashplate nozzle performance

    Energy Technology Data Exchange (ETDEWEB)

    Nieminen, K.

    1996-12-31

    The performance of a throttled black liquor splashplate nozzle was studied in this work. A series of industrial-scale experiments were performed using mass flow rate as a variable at a fixed temperature. The experiments were carried out in a spraying chamber next to the recovery boiler with real mill liquor. The disintegration process of the liquor sheet was videotaped for analyzing. The mass flow rate distribution was measured with a collector. The liquor drops produced by the nozzle were videotaped and measured with a video image analysis technique. The industrial-scale experiments were afterwards repeated on a small scale in the laboratory environment which made it possible to study the liquid sheet disintegration process thoroughly. The small-scale experiments were carried out with a solution of water and glycerol and a splashplate nozzle of approximately one tenth the size of full-scale nozzle. The whole liquid sheet and close-up exposures of the plate area were videotaped. However, the videotaping equipment (camera and objective) were not capable of observing the very thin and transparent liquid sheet. The mass flow rate distribution was measured with steps of 2.5 deg from the plate centerline with a collector device. The drop sizes were measured from various sheet angles with Malvern Particle Sizer and a phase Doppler particle anemometer (Aerometrics). The modeling was based on dimensional analysis. The objective was to compare these two experimental settings and to find out whether small-scale experiments can be used in predicting the spraying characteristics in the full-scale. It was also of interest to test the measured black liquor drop sizes against drop size correlations obtained from the literature. (31 refs.)

  10. Proceedings of the black liquor research program review fifth meeting

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    On June 14--17, 1988 the participants and invited guests of the Cooperative Program in Kraft Recovery gathered in Charleston, South Carolina, to review progress on four major black liquor research programs being executed at the Institute of Paper Chemistry, the University of Maine, the National Bureau of Standards, and the University of Florida. These programs include: (1) Black Liquor Properties; (2) Black Liquor Droplet Formation; (3) Black Liquor Nozzle Evaluation; and (4) Black Liquor Combustion. In addition to the objectives of previous meetings, this meeting made a direct attempt to gather ideas on how to improve our ability to move from new technology concepts to commercial implementation. Also attached is the agenda for the Charleston meeting. The first two days were involved with updates and reviews of the four major black liquor programs. A half day was spent discussing pathways to implementation and developing thoughts on what industry, DOE and academia could do to facilitate commercial implementation of the research results. This publication is a summary of the presentations made in Charleston and the industry responses to the research work. Readers are cautioned that the contents are in-progress updates on the status of the research and do not represent referred technical papers. Any questions regarding the content should be referred to the principal investigators of the project.

  11. Drop formation of black liquor spraying; Mustalipeaen pisaroituminen

    Energy Technology Data Exchange (ETDEWEB)

    Fogelholm, C.J.; Kankkunen, A.; Nieminen, K.; Laine, J.; Miikkulainen, P. [Helsinki Univ. of Technology, Otaniemi (Finland): Lab. of Energy Technology and Environmental Protection

    1997-10-01

    Black liquor is a spent liquor of the pulp and paper industry. It is burned in kraft recovery boilers for chemical and energy recovery. The high dry solids content and viscosity of black liquor require a high spraying temperature. This affects the performance of the boiler. Kraft recovery boiler deposit formation, emissions and chemical recovery are strongly affected by the drop size and the velocity of the black liquor spray formed by a splashplate nozzle. The sheet breakup mechanism is studied with a system based on a video and image-analysis. The drop size of mill-scale nozzles was measured also with an image-analysis-system. Measurements were carried out in a spray test chamber. The sheet breakup mechanism and drop size tests were carried out both below and over the boiling point of black liquor. Special attention was paid to the effect of flashing on drop formation. Temperature increase normally decreases drop size. In the temperature where the wavy-sheet disintegration changes to perforated-sheet disintegration the drop size increases. Spray velocity rises when the temperature is increased above the boiling point. (orig.)

  12. High-solids black liquor firing in pulp and paper industry kraft recovery boilers: Phase 1 -- Final report. Volume 2: Project technical results

    Energy Technology Data Exchange (ETDEWEB)

    Southards, W.T.; Clement, J.L.; McIlroy, R.A.; Tharp, M.R.; Verrill, C.L.; Wessell, R.A.

    1995-11-01

    This project is a multiple-phase effort to develop technologies to improve high-solids black liquor firing in pulp mill recovery boilers. The principal means to this end is to construct and operate a pilot-scale recovery furnace simulator (RFS) in which these technologies can be tested. The Phase 1 objectives are to prepare a preliminary design for the RFS, delineate a project concept for evaluating candidate technologies, establish industrial partners, and report the results. Phase 1 addressed the objectives with seven tasks: Develop a preliminary design of the RFS; estimate the detailed design and construction costs of the RFS and the balance of the project; identify interested parties in the paper industry and key suppliers; plan the Phase 2 and Phase 3 tests to characterize the RFS; evaluate the economic justification for high-solids firing deployment in the industry; evaluate high-solids black liquor property data to support the RFS design; manage the project and reporting results, which included planning the future program direction.

  13. THE SHEAR-THINNING PHENOMENON OF BAGASSE KRAFT BLACK LIQUOR FLUID

    Institute of Scientific and Technical Information of China (English)

    Rendang Yang; Kefu Chen; Jun Xu; Heng Zhang; Qifeng Chen; Jin Wang

    2004-01-01

    The flow curves of bagasse Kraft black liquor over a shear-rate range of 10-1s-l~103s-1 were investigated by using the Rheometric RFSⅡ rheometer.Experimental results show that Bagasse black liquors are non-Newtonian fluids instead of Newtonian fluids at higher solids contents, and the viscosities of black liquor would decrease .about 2~3 orders of magnitude with an increase in the shear rates. The apparent viscosity and flow behavior of bagasse black liquor are also affected by its solids content, and the higher solids content the more shear-thinning bagasse black liquor fluid is. In addition, the power-law equation was utilized to fit these flow curves at different conditions. Finally, the significances of shear-thinning properties of bagasse black liquor in the chemical recovery system, such as friction calculation of pipe and design optimization of the whole recovery system, were presented.

  14. Estimation of elemental composition from proximate analysis of black liquor

    Energy Technology Data Exchange (ETDEWEB)

    Vakkilainen, E.K. [Andritz-Ahlstrom Corporation, Espoo (Finland)

    2000-07-01

    The black liquor properties will vary depending on the raw material used for pulping, the pulping conditions, the equipment used for pulping and the treatment of the liquor after the pulping. Accurate analysis of black liquor is needed to determine energy efficiency of o pulp mill, to calculate gas flows for environmental compliance reports and for production statistics. Black liquor composition and combustion properties can be estimated from known spread of data. Main source has been an internal company black liquor databank, which contains over 900 black liquor analysis. Regression equations for black liquor carbon, hydrogen, and inorganic element contents were derived. (orig.)

  15. Sodium and sulfur release and recapture during black liquor burning

    Energy Technology Data Exchange (ETDEWEB)

    Frederick, W.J.; Iisa, K.; Wag, K.; Reis, V.V.; Boonsongsup, L.; Forssen, M.; Hupa, M.

    1995-08-01

    The objective of this study was to provide data on sulfur and sodium volatilization during black liquor burning, and on SO2 capture by solid sodium carbonate and sodium chloride. This data was interpreted and modeled into rate equations suitable for use in computational models for recovery boilers.

  16. Novel technology of resource recovery from reed black liquor%芦苇浆造纸黑液资源化处理新工艺

    Institute of Scientific and Technical Information of China (English)

    杨卫春; 尤翔宇; 王云燕; 赵静; 柴立元; 舒余德

    2012-01-01

    A novel process was proposed to treat reed black liquor: desilication-acidification-three-dimensional electrolysis-causticization-reuse in pulp making. The precipitation method was used to remove silicon by adding Ca(OH)2. The residual concentration of silicon decreases from 6.68 g/L to 0.12 g/L and the removal rate of silicon is maintained at 98.2%. Lignin was recovered by acidulation-precipitation after the addition of sulfuric acid. The residual concentration of CODCr can be reduced from 220.648 g/L to 54.179 g/L and its removal rate is maintained at 75.45%. 8.5 g lignin was recovered from 100 mL black liquor. Based on the analysis of FTIR, EDX and SEM, it is found that the structure of lignin consists mainly of syringyl monomers and hydroxyl groups, and the lignin particles are not fibrous but granular. The reed pulp black liquor pretreated by acidification method was treated by electrolysis with a three-dimensional electrode reactor. The removal rate of TOC is maintained at 35.57% and the residual concentration of CODCr can be reduced to 36.761 g/L. Then, causticization was adopted to recovery residual alkali from the black liquor, which can be reused in the paper mill. After causticization, the concentration of effective alkali is 8.30 g/L and the causticization rate of the solution is about 78.60%, the residual concentration of CODcr in the black liquor is further reduced to 33.085 g/L and the removal rate of TOC is 9.99%.%针对芦苇浆造纸产生的浓缩黑液的特点,提出了黑液脱硅—酸析回收木质素—三维电极电解—苛化回收NaOH-出水返回生产的工艺流程.采用Ca(OH)2沉淀法去除黑液中的SiO2,黑液中硅含量由6.68 g/L降至0.12g/L,脱硅率为98.20%;黑液脱硅后加入H2SO4去除COD并回收木质素,CODCr由220.648 g/L降至54.179 g/L左右,脱除率达到75.45%,每100mL黑液可回收8.5 g木质素.FTIR、SEM和EDX的分析结果表明:酸析木质素结构以紫丁香基和对羟基的单体结构为

  17. Pressurized pyrolysis and gasification behaviour of black liquor and biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Whitty, K.; Backman, R.; Hupa, M. [Aabo Akademi, Turku (Finland)

    1996-12-01

    The objective of this project is to obtain basic experimental data on pyrolysis and gasification of various black liquors and biofuels at elevated pressures, and to model these processes. Liquor-to-liquor differences in conversion behavior of single liquor droplets during gasification at atmospheric pressure were investigated. The applicability of a rate equation developed for catalyzed gasification of carbon was investigated with regard to pressurized black liquor gasification. A neural network was developed to simulate the progression of char conversion during pressurized black liquor gasification. Pyrolysis of black liquor in a pressurized drop-tube furnace was investigated in collaboration with KTH in Stockholm. (author)

  18. Single particle studies of black liquor gasification under pressurized conditions

    Energy Technology Data Exchange (ETDEWEB)

    Whitty, K.; Backman, R.; Hupa, M.; Backman, P.; Ek, P.; Hulden, S.T.; Kullberg, M.; Sorvari, V.

    1997-10-01

    The purpose of this project is to provide experimental data relevant to pressurized black liquor gasification concepts. Specifically, the following two goals will be achieved: Data on swelling, char yields and component release during pressurized pyrolysis of small samples of black liquor will be obtained. The reactivity and physical behavior of single black liquor droplets during simultaneous pyrolysis and gasification will be investigated. The structure and composition of black liquor char during formation and conversion will be studied. (orig.)

  19. In situ analysis of ash deposits from black liquor combustion

    Energy Technology Data Exchange (ETDEWEB)

    Bernath, P. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility]|[Univ. of Toronto, Ontario (Canada); Sinquefield, S.A. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility]|[Oregon State Univ., Eugene, OR (United States); Baxter, L.L.; Sclippa, G.; Rohlfing, C. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility; Barfield, M. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility]|[Univ. of Arizona, Tucson, AZ (United States)

    1996-05-01

    Aerosols formed during combustion of black liquor cause a significant fire-side fouling problem in pulp mill recovery boilers. The ash deposits reduce heat transfer effectiveness, plug gas passages, and contribute to corrosion. Both vapors and condensation aerosols lead to the formation of such deposits. The high ash content of the fuel and the low dew point of the condensate salts lead to a high aerosol and vapor concentration in most boilers. In situ measurements of the chemical composition of these deposits is an important step in gaining a fundamental understanding of the deposition process. Infrared emission spectroscopy is used to characterize the composition of thin film deposits resulting from the combustion of black liquor and the deposition of submicron aerosols and vapors. New reference spectra of Na{sub 2}SO{sub 4}, K{sub 2}SO{sub 4}, Na{sub 2}CO{sub 3} and K{sub 2}CO{sub 3} pure component films were recorded and compared with the spectra of the black liquor deposit. All of the black liquor emission bands were identified using a combination of literature data and ab initio calculations. Ab initio calculations also predict the locations and intensities of bands for the alkali vapors of interest. 39 refs., 9 figs.

  20. In Situ Causticizing for Black Liquor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Scott Alan Sinquefield

    2005-10-01

    Black liquor gasification offers a number of attractive incentives to replace Tomlinson boilers but it also leads to an increase in the causticizing load. Reasons for this have been described in previous reports (FY04 ERC, et.al.). The chemistries have also been covered but will be reviewed here briefly. Experimental results of the causticizing reactions with black liquor are presented here. Results of the modeling work were presented in detail in the Phase 1 report. They are included in Table 2 for comparison but will not be discussed in detail. The causticizing agents were added to black liquor in the ratios shown in Table 1, mixed, and then spray-dried. The mixture ratios (doping levels) reflect amount calculated from the stoichiometry above to achieve specified conversions shown in the table. The solids were sieved to 63-90 microns for use in the entrained flow reactors. The firing conditions are shown in Table 2. Pictures and descriptions of the reactors can be found in the Phase 1 annual report. Following gasification, the solids (char) was collected and analyzed by coulometric titration (for carbonate and total carbon), and by inductively coupled plasma emission spectroscopy (ICP) for a wide array of metals.

  1. Generation of Hydrogen, Lignin and Sodium Hydroxide from Pulping Black Liquor by Electrolysis

    Directory of Open Access Journals (Sweden)

    Guangzai Nong

    2015-12-01

    Full Text Available Black liquor is generated in Kraft pulping of wood or non-wood raw material in pulp mills, and regarded as a renewable resource. The objective of this paper was to develop an effective means to remove the water pollutants by recovery of both lignin and sodium hydroxide from black liquor, based on electrolysis. The treatment of a 1000 mL of black liquor (122 g/L solid contents consumed 345.6 kJ of electric energy, and led to the generation of 30.7 g of sodium hydroxide, 0.82 g of hydrogen gas and 52.1 g of biomass solids. Therefore, the recovery ratios of elemental sodium and biomass solids are 80.4% and 76%, respectively. Treating black liquor by electrolysis is an environmentally friendly technology that can, in particular, be an alternative process in addressing the environmental issues of pulping waste liquor to the small-scale mills without black liquor recovery.

  2. A new pulping process for wheat straw to reduce problems with the discharge of black liquor.

    Science.gov (United States)

    Huang, Guolin; Shi, Jeffrey X; Langrish, Tim A G

    2007-11-01

    Aqueous ammonia mixed with caustic potash as wheat straw pulping liquor was investigated. The caustic potash did not only reduce the NH3 usage and cooking time, but also provided a potassium source as a fertilizer in the black liquor. Excess NH3 in the black liquor was recovered and reused by batch distillation with a 98% recovery rate of free NH3. The black liquor was further treated for reuse by coagulation under alkaline conditions. The effects of different flocculation conditions, such as the dosage of 10% aluminium polychloride, the dosage of 0.1% polyacrylamide, the reaction temperature and the pH of the black liquor on the flocculating process were studied. The supernatant was recycled as cooking liquor by adding extra NH4OH and KOH. The amount of delignification and the pulp yield for the process remained steady at 82-85% and 48-50%, respectively, when reusing the supernatant four times. The coagulated residues could be further processed as solid fertilizers. This study provided a new pulping process for wheat straw to reduce problems of discharge black liquor. PMID:17092702

  3. Combustion properties of kraft black liquors; Ligniinifraktion vaikutus mustalipeaen poltto-ominaisuuksiin

    Energy Technology Data Exchange (ETDEWEB)

    Alen, R.; Rantanen, K.; Ekman, J.; Malkavaara, P. [Jyvaeskylae Univ. (Finland)

    1996-12-01

    The aim of this investigation was to find relationships between the structure of the dissolved lignin and the combustion properties (pyrolysis time, char burning time, and swelling) of softwood and hardwood kraft black liquors. In this conjunction, pine and birch chips, as well as their two mixtures (the mass ratios of pine chips to birch chips were 80:20 and 60:40), were delignified by conventional kraft pulping. In each cook series, a liquor sample was withdrawn at certain time intervals to obtain liquor samples with different chemical composition. The black liquors obtained were analyzed with respect to the content of lignin and `lignin monomers`, but also the molecular-mass distribution and the mass average molecular mass of lignin were made. In addition, the dissolved lignin was characterized by NMR spectroscopy and elemental analysis. Further data on the chemical structures of lignin in black liquors were obtained by identifying various degradation products formed from this material during oxidative (CuO oxidation) and pyrolytic treatments. Several correlations between the `structural parameters` of the dissolved lignin and the combustion properties of black liquor were found. These correlations were significant especially in the case of pine cook. The results revealed many findings which are, together with the earlier data, useful for a better understanding of the thermochemical behavior of different kraft black liquors during combustion in a recovery furnace. (author)

  4. Combustion properties of kraft black liquors; Mustalipeaen koostumuksen vaikutus lipeaen poltto-ominaisuuksiin

    Energy Technology Data Exchange (ETDEWEB)

    Alen, R.; Siistonen, H.; Heikkinen, T.; Malkavaara, P. [Jyvaeskylae Univ. (Finland)

    1996-12-01

    The aim of this work is to study the combustion properties of kraft black liquors from modified cooking. Both the industrial and laboratory-made black liquors are included. In addition, changes in the combustion properties of the spent liquors obtained by mixing prior to combustion different chlorine-free bleach liquors with black liquor are studied. (author)

  5. A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, A.L.; Zaman, A.A.; Stoy, M.O.; Schmidl, G.W.; Dong, D.J.; Speck, B.

    1998-04-01

    A wide variety of experimental techniques have been used in this work, and many of these have been developed completely or improved significantly in the course of the research done during this program. Therefore, it is appropriate to describe these techniques in detail as a reference for future workers so that the techniques can be used in future work with little additional effort or so that the results reported from this program can be compared better with future results from other work. In many cases, the techniques described are for specific analytical instruments. It is recognized that these may be superseded by future developments and improvements in instrumentation if a complete description of techniques used successfully in the past on other instrumentation is available. The total pulping and liquor preparation research work performed included chip and white liquor preparation, digestion, pulp washing, liquor and wash recovery, liquor sampling, weak liquor concentration in two steps to about 45--50% solids with an intermediate soap skimming at about 140F and 27--30% solids, determination of pulp yield and Kappa number, determination of total liquor solids, and a check on the total material balance for pulping. All other research was performed either on a sample of the weak black liquor (the combined black liquor and washes from the digester) or on the skimmed liquor that had been concentrated.

  6. New black liquor combustion characteristics III; Mustalipeaen uudet poltto-ominaisuudet III

    Energy Technology Data Exchange (ETDEWEB)

    Hupa, M.; Forssen, M.; Backman, R.; Enestam, S.; Lauren, T.; Skrifvars, B.J. [Aabo Akademi, Turku (Finland). Combustion Chemistry Research Group

    1997-10-01

    The main purposes in this work is to: 1. Compare black liquor combustion characterization results to recovery boiler experiences. 2. Study the mechanisms of sodium release in black liquor combustion In the first part results from black liquor combustion characterization tests developed by Aabo Akademi University will be compared to experiences at four Finnish kraft recovery boilers. When comparing the laboratory data to the compiled field data emphasis will be put on the behavior of the black liquor during burning, the release of sodium and potassium, the melting behavior of the deposits and the NO and SO{sub 2} emissions. The main purpose in the second part of the work is to study the release mechanisms of sodium from black liquor char during combustion. Sodium is mainly released from the char by the mechanism where the molten sodiumcarbonate reacts with the char carbon. The study is divided into four subtasks and is performed mainly by conducting experiments in laboratory scale devices: (1) Sodium release during char reactions is studied for different liquors by analyzing the amount of sodium remaining in char after different holding times in a hot inert atmosphere. (2) A DTA/TGA apparatus is used to study in isothermal conditions the char reactions on prepyrolyzed char. (3) The effect of the form of sodium on the sodium release during char reactions. Black liquors added with different sodium salts (Na{sub 2}CO{sub 3}, Na{sub 2}SO{sub 4}, Na{sub 2}S{sub 2}O{sub 2}, Na{sub 2}S sekae NaCl) are used in experiments as in subtask 1. (4) Sodium release during combustion (2-5 % O{sub 2}) of single black liquor particles

  7. High-solids black liquor firing in pulp and paper industry kraft recovery boilers: Phase Ia - Low-temperature gasifier evaluation. Final report, November 1, 1995--October 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Southards, W.T.; Blude, J.D.; Dickinson, J.A. [and others

    1997-06-01

    This project, conducted under The United States Department of Energy (DOE) Cooperative Agreement DE-FC36-94GO10002/A002, was part of a multiple-phase effort to develop technologies that improve the energy efficiency and economics of chemical process recovery in the pulp and paper industry. The approach taken was to consider two major alternatives in two phases. Phase I, conducted previously, considered means to improve pulp mill recovery boilers using high-solids advanced combustion of black liquor; while this project, Phase la, considered means to recover kraft pulping mill process chemicals by low-temperature black liquor gasification. The principal steps previously proposed in this program were: (1) Evaluate these two technologies, high-solids advanced combustion and gasification, and then select a path forward using the more promising of these two options for future work. (2) Design and construct a pilot-scale unit based on the selected technology, and using that unit, develop the precompetitive data necessary to make commercialization attractive. (3) Develop and deploy a first-of-a-kind (FOAK) commercial unit in a kraft pulp mill. Phase I, which evaluated the high-solids advanced combustion option, was concluded in 1995. Results of that project phase were reported previously. This report describes the work conducted in Phase Ia. The work is described in Sections 1 through 4 and six appendices provide additional detail.

  8. Entrained Flow Black Liquor Gasification - Detailed Experiments and Mathematical Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Carlsson, Per (Energy Technology Centre, Piteaa (Sweden)), e-mail: per.carlsson@etcpitea.se

    2009-07-01

    Black liquor, a by-product from the Kraft pulping process is a highly viscous fluid consisting of approximately 30% water, 30 % alkali salts and 40 % combustible material. The alkali salts originating from the pulp making process need to be recovered in order for the pulp mill to be economical and to satisfy environmental regulation. Currently, the recovery takes place in large boilers called Tomlinson recovery boilers. However, a more energy efficient way to recover the chemicals could be via gasification in a pressurized, entrained flow, high temperature gasifier. To demonstrate this technology a development plant (DP1) was built in 2005 by the technology vendor Chemrec. Since then, the plant has been running for more than 10,000 h and frequently been updated and optimized. As steps towards commercialization and scale-up different computational models of varying sophistication are used as design and optimization tools for the process. Still, the engineering tools can only provide sensible predictions if they are properly validated and verified. This thesis is concerned with validation of a comprehensive mathematical model based on Computational Fluid Dynamics (CFD) describing the gasification reactor and experimental investigations of the process characteristics in the DP1 gasifier. Paper A describes the system design and methodology for high temperature gas sampling during pressurized black liquor gasification. In this work a water-cooled gas sampling probe is installed in the hot part of the DP1 gasification reactor and several gas samples are withdrawn and analyzed. The experimentally obtained data in Paper A are then used as validation data for the CFD-model described in Paper B. In Paper C the obtained data from Paper A are thoroughly analyzed and the influence of reactor operation on producer gas composition is determined. In Paper D black liquor sprays from a gas assisted nozzle is experimentally investigated using high speed photography. Furthermore, the

  9. Mass and Energy Balances for Black Liquor Gasification with Borate Autocausticization

    Energy Technology Data Exchange (ETDEWEB)

    Arosenius, Anna-Karin

    2007-01-15

    Gasification of black liquor is considered to be a promising alternative technique for recovery of black liquor in kraft pulping. Compared to the conventional recovery process, i.e. combustion of black liquor in a recovery boiler, the primary advantage of gasification is the potential to produce biofuels and chemicals. The causticizing demand is though higher for the gasification technology. If the existing lime kiln can not handle the extra load, partial borate autocausticizing may be an alternative. In this work, the energy balance for a kraft pulp mill using black liquor gasification and partial borate autocausticization is compared with a mill using gasification and extended lime causticizing and also with a mill having a conventional recovery cycle. Additionally, the chemical costs for the partial borate autocausticizing is compared to the investment cost of the larger lime kiln. Mass and energy balances are based on the updated reference mill in the MISTRA Research Program, 'The Eco-Cyclic Pulp Mill', producing 2000 ADt of pulp per day. The results show that less energy is released to steam production in a gasifier than in a recovery boiler and instead energy is released in chemical form in the produced syn gas. Using partial borate autocausticizing, the demand of external energy is lowered in the lime kiln compared to extended lime causticization. The borate autocausticization, taking place in the gasifier with black liquor as energy source, only demands a third of the energy saved in the lime kiln. On the other hand the chemical costs for the borate autocausticization exceeds the investment cost for a larger lime kiln after five years.

  10. Pyrolysis and gasification behavior of black liquor under pressurized conditions

    Energy Technology Data Exchange (ETDEWEB)

    Whitty, K.

    1997-11-01

    The purpose of this study has been to enhance the understanding of the processes involved in pressurized black liquor gasification. Gasification is known to occur in three stages: drying, pyrolysis and char gasification. The work presented here focuses on the pyrolysis and gasification stages. Experiments were carried out primarily in two laboratory-scale reactors. A pressurized grid heater was used to study black liquor pyrolysis under pressurized conditions. Char yields and the fate of elements in the liquor, as well as the degree of liquor swelling, were measured in this device. A pressurized thermogravimetric reactor was used to measure the rate of the char gasification process under different temperatures and pressures and in various gas atmospheres. Pyrolysis experiments were also carried out in this device, and data on swelling behavior, char yields and component release were obtained 317 refs.

  11. Technical Report Cellulosic Based Black Liquor Gasification and Fuels Plant Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Fornetti, Micheal [Escanaba Paper Company, MI (United States); Freeman, Douglas [Escanaba Paper Company, MI (United States)

    2012-10-31

    produce transportation fuels and produce pulp at the same time. This has the added advantage of reducing or eliminating the need for a recovery boiler. The recovery boiler is an extremely expensive unit operation in the Kraft process and is key to the chemical recovery system that makes the Kraft process successful. Going to a gasification process with potentially higher energy efficiency, improve the pulping process and be more efficient with the use of wood. At the same time a renewable fuel product can be made. Cellulosic Based Black Liquor Gasification and Fuels Plant progressed with the design of the mill as Chemrec continued to work on their pilot plant data gathering. The design information helped to guide the pilot plant and vice versa. In the end, the design details showed that the process was technically feasible. However, at the relatively small size of this plant the specific capital cost was very high and could only be considered if the pulp operation needed to replace the recovery boiler. Some of the reasons for the costs being high are attributed to the many constraints that needed to be addressed in the pulping process. Additionally, the Methanol product did not have a vehicle fuel supply chain to enter into. A different product selection could have eliminated this issue. However, with the selected design, the installation at Escanaba Paper Mill was not economically feasible and the project was not pursued further.

  12. ON THE BLACK LIQUOR AND RECYCLE COOKING OF AS-AQ STRAW PULP

    Institute of Scientific and Technical Information of China (English)

    Haiqiang Shi; Beihai He; Bingyue Liu

    2004-01-01

    Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor,separated liquor and pulp of every cycles are analyzed respectively. Result shows that the content of lignin and organism in recycle black liquor and separated liquor increases faster in the first three cycles and then continues to increase slowly till four or five times, after that it trends to a stable state. The main organism separated from waste liquor of AS-AQ treated by sulfur dioxide is alkali-lignin,above 50% of total lignin in black liquor. The yield of pulp made from recycle cooking is steady, the hardness of pulp has a great improvement with recycle cooking. The brightness of pulp reduces correspondingly before bleaching, and after bleaching the brightness of pulp is relatively high and steady at the same sodium hypo chlorite dosage.

  13. Release model for black liquor droplet; Mustalipeaepisaran vapautumismalli

    Energy Technology Data Exchange (ETDEWEB)

    Saastamoinen, J. [VTT Energy, Espoo (Finland)

    1997-10-01

    The release of sodium, potassium, chlorine and sulphur from black liquor droplets during pyrolysis, combustion and gasification is studied by modelling work. A model for drying, pyrolysis and swelling of black liquor has been developed earlier. A submodel for the release of sulphur, which takes place at temperatures below 500 deg C has been incorporated to this model. A previous model for the combustion and gasification of char particles has been further developed to account for the effect of sodium, potassium and chlorine. A model for the release of these components as function of time has been developed. (orig.)

  14. Influence of the chemical composition on the combustion properties of kraft black liquor; Mustalipeaen koostumuksen vaikutus lipeaen poltto-ominaisuuksiin

    Energy Technology Data Exchange (ETDEWEB)

    Alen, R.; Siistonen, H.; Malkavaara, P. [Jyvaeskylae Univ. (Finland). Inst. of Chemistry

    1997-10-01

    The aim of this work is to study the combustion properties of kraft black liquors from modified cooking. Both the industrial and laboratory-made black liquors are included. In addition, changes in the combustion properties of the spent liquors obtained by mixing prior to combustion different chlorine-free bleach liquors with black liquor are studied. (orig.)

  15. Advancement of High Temperature Black Liquor Gasification Technology

    Energy Technology Data Exchange (ETDEWEB)

    Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

    2008-03-31

    Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the

  16. Demonstration of Black Liquor Gasification at Big Island

    Energy Technology Data Exchange (ETDEWEB)

    Robert DeCarrera

    2007-04-14

    This Final Technical Report provides an account of the project for the demonstration of Black Liquor Gasification at Georgia-Pacific LLC's Big Island, VA facility. This report covers the period from May 5, 2000 through November 30, 2006.

  17. Catalytic effect of black liquor on the gasification reactivity of petroleum coke

    Energy Technology Data Exchange (ETDEWEB)

    Zhan, Xiuli; Zhou, ZhiJie; Wang, Fuchen [Kay Laboratory of Coal Gasification of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China)

    2010-05-15

    CO{sub 2} gasification of petroleum coke using black liquor as a catalyst was performed in a thermogravimetric analyzer (TGA) under temperatures 1223-1673 K at ambient pressure to evaluate the effect of black liquor loading on petroleum coke gasification. It was found that the gasification reactivity of petroleum coke was improved greatly by black liquor. The gasification reactivity was affected by different loading methods in the order: wet grinding > dry grinding > physical impregnation > dry mix. The catalytic activity of black liquor was higher than that of pure alkali metal. The effect of temperature on the gasification reactivity of petroleum coke was changed by black liquor. The reactivity reaches its maximum at 1573 K. The reactivity of petroleum coke was found higher than that of Shenfu coal when black liquor loading is 5 wt.% (of petroleum coke), clearly demonstrating that black liquor could be an effective catalyst for petroleum coke gasification. (author)

  18. Antioxidant Activity of Lignin Phenolic Compounds Extracted from Kraft and Sulphite Black Liquors

    OpenAIRE

    Ana Paula Duarte; Cecília Baptista; Nuno Gil; Hélio Faustino

    2010-01-01

    The antioxidant activity of the phenolic compounds present in industrial black liquors obtained from the two cooking processes (kraft and sulphite) used in Portugal to produce Eucalyptus globulus pulp was evaluated. The black liquors treated at several pH values were extracted with ethyl acetate. Phenolic fractions were further separated by liquid chromatography of the crude extracts of kraft liquor at pH = 6 and sulphite liquor at the original pH. Total phenolic content was determined in ter...

  19. Hydrogen production by supercritical water gasification of alkaline black liquor

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Changqing; Guo, Liejin; Chen, Yunan; Lu, Youjun [Xi' an Jiatong Univ. (China)

    2010-07-01

    Black liquor was gasified continuously in supercritical water successfully and the main gaseous products were H{sub 2}, CO{sub 2} and CH{sub 4} with little amount of CO, C{sub 2}H{sub 4} and C{sub 2}H{sub 6}. The increase of the temperature and the decrease of the flow rate and black liquor concentration enhanced SCWG of black liquor. The change of the system pressure had limited influence on the gasification effect. The maximal COD removal efficiency of 88.69 % was obtained at the temperature of 600 C. The pH values of the aqueous residue were all decreased to the range of 6.4{proportional_to}8 while the pH value of cooling effluence below 360 C increased to about 11 and the sodium content was much higher than that in the aqueous residue. The reaction rate for COD degradation in supercritical water was obtained by assuming pseudo first order reaction. And the activation energy and pre-exponential for COD removal in SCWG were 74.38kJ/mol and 1.11 x 10{sup 4} s{sup -1} respectively. (orig.)

  20. Large scale experiments and modeling of black liquor gasification

    Energy Technology Data Exchange (ETDEWEB)

    Carlsson, Per

    2011-07-01

    Biomass gasification could provide a basis for increased electricity and engine fuel production from a renewable source in the pulp and paper industry. This work focuses on the largest byproduct available at the pulp mills, black liquor. Black liquor is a mixture of spent cooking chemicals, dissolved lignin, dissolved carbohydrates and a small portion of inorganic compounds found in the wood. The conventional technology to recover the cooking chemicals and the chemical energy as heat is combustion in large boilers. Here, gasification could be an alternative, replacing or complementing the boilers. The gasification technology produces a combustible gas that can be cleaned to produce electricity in a gas turbine/engine or, be synthesized into valuable chemicals or liquid engine fuels. The technology has been demonstrated in development scale since 2005 and appears to be promising. Still, commercial plants have not yet been built. This thesis focuses on the understanding of the oxygen blown, pressurized, entrained flow, black liquor gasification technology. The main goals have been to increase the understanding about the dominating mechanisms in black liquor gasification and to develop an engineering tool that can be used to design and optimize, pressurized, entrained flow, black liquor gasifiers. To accomplish these goals gas samples were extracted from the gasification reactor using a gas sampling probe that was developed within this work. Gas samples were also collected downstream the quench located underneath the reactor and the results were compared. Finally, an existing numerical model was developed so it can predict the behavior of the black liquor gasifier within reasonable accuracy. Even though the actual mechanisms in the reactor and quench are very complex it appears that they can be described with relatively simple global mechanisms. The main gas components are dictated by the water gas shift reaction. At the outlet of the reactor the gas composition is

  1. Treatment of black liquor from the papermaking industry by acidification and reuse

    Institute of Scientific and Technical Information of China (English)

    YANG Wen-bo; MU Huan-zhen; HUANG Yan-chu

    2003-01-01

    Two different kinds of black liquor from the papermaking industry were treated by acidification and reuse. The experimental parameters and conditions were discussed in detail. The experimental results indicated that the treatment process mentioned in this article is an effective process for the treatment of black liquor from the papermaking industry. By the treatment, the solid materials in black liquor are transferred into two by-products and the other components are reused or evaporated. Thus, no wastewater except some condensation water would be discharged in pulping process and the problem of pollution of black liquor would be effectively solved.

  2. Treatment of black liquor from the papermaking industry by acidification and reuse.

    Science.gov (United States)

    Yang, Wen-Bo; Mu, Huan-Zhen; Huang, Yan-Chu

    2003-09-01

    Two different kinds of black liquor from the papermaking industry were treated by acidification and reuse. The experimental parameters and conditions were discussed in detail. The experimental results indicated that the treatment process mentioned in this article is an effective process for the treatment of black liquor from the papermaking industry. By the treatment, the solid materials in black liquor are transferred into two by-products and the other components are reused or evaporated. Thus, no wastewater except some condensation water would be discharged in pulping process and the problem of pollution of black liquor would be effectively solved. PMID:14562934

  3. A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, A.L.; Zaman, A.A.

    1998-05-01

    The overall objective of the program was to develop correlations to predict physical properties within requirements of engineering precision from a knowledge of pulping conditions and of kraft black liquor composition, if possible. These correlations were to include those relating thermodynamic properties to pulping conditions and liquor composition. The basic premise upon which the research was based is the premise that black liquor behaves as a polymer solution. This premise has proven to be true, and has been used successfully in developing data reduction methods and in interpreting results. A three phase effort involving pulping, analysis of liquor composition, and measurement of liquor properties was conducted.

  4. ON THE BLACK LIQUOR AND RECYCLE COOKING OF AS-AQ STRAW PULP

    Institute of Scientific and Technical Information of China (English)

    HaiqiangShi; BeihaiHe; BingyueLiu

    2004-01-01

    Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated liquor and pulp of every cycles are analyzed respectively. Result shows that the content of lignin and organism in recycle black liquor and separated liquor increases faster in the first three cycles and then continues to increase slowly till four or five times, after that it trends to a stable state. The main organism separated fi'om waste liquor of AS-AQ treated by sulfur dioxide is alkali-lignin,above 50% of total lignin in black liquor. The yield of pulp made fi'om recycle cooking is steady, the hardness of pulp has a great improvement with recycle cooking. The brightness of pulp reduces correspondingly before bleaching, and after bleaching the brightness of pulp is relatively high and steady at the same sodium hypo chlorite dosage.

  5. THREE -PHASE CIRCULATING FLUIDIZED BED EVAPORATOR FOR WHEAT STRAW BLACK LIQUOR EVAPORATION

    Institute of Scientific and Technical Information of China (English)

    Yuan-yuanJia

    2004-01-01

    A novel vapor-liquid-solid circulating fluidized bed evaporator, meaning for enhancing heat transfer and preventing fouling, is applied to wheat straw black liquor, which is the primary pollutant in China's papermaking industry. It is treated by alkali recovery, in which evaporation is a key process. The experimental results show that the vapor-liquid-solid three-phase boiling heat transfer coefficient is enhanced by 20%-40% than that of vapor-liquid two-phase boiling flow, also, the novel evaporator exhibits an excellent function of fouling prevention.

  6. THREE -PHASE CIRCULATING FLUIDIZED BED EVAPORATOR FOR WHEAT STRAW BLACK LIQUOR EVAPORATION

    Institute of Scientific and Technical Information of China (English)

    Yuan-yuan Jia

    2004-01-01

    A novel vapor-liquid-solid circulating fluidized bed evaporator, meaning for enhancing heat transfer and preventing fouling, is applied to wheat straw black liquor, which is the primary pollutant in China′s papermaking industry. It is treated by alkali recovery,in which evaporation is a key process. The experimental results show that the vapor-liquid-solid three-phase boiling heat transfer coefficient is enhanced by 20% ~40% than that of vapor-liquid two-phase boiling flow, also, the novel evaporator exhibits an excellent function of fouling prevention.

  7. Uranium recovery from acid leach liquors: Ix or Sx?

    International Nuclear Information System (INIS)

    Various technologies for uranium recovery from sulphuric acid leach solutions were compared. Although the main consideration was the economics (Capex, recovery and Opex) of the various technologies and associated unit operations, other factors, such as flexibility, reliability, ease of operation, fire risk, stability with regards to feed flow variations, and feed solids content, would also need to be considered in the overall analysis. The design basis used for the comparison was a production rate or 200 kg/h U3O8 over a solution concentration range of 40 to 1500 mg/L U3O8. The technologies to be compared included Resin-in-pulp (RIP), Fixed-bed Ion Exchange (FBIX), Continuous Countercurrent Ion Exchange (CCIX, e.g. NIMCIX), and Solvent Extraction (Sx) using Bateman Pulsed Columns (BPC) and Bateman Settlers. Countercurrent Decantation (CCD) and clarification would be required for the Sx and FBIX technologies. The preliminary economic evaluation indicated that a flowsheet, comprising RIP for bulk uranium extraction and upgrade, followed by Sx, employing the BPC for purification of the RIP eluate stream, was the most economic option at leach liquor concentrations below 900 mg/L. Above 900 mg/L the economic evaluation suggested that CCDs followed by Sx in the BPC was the most economical processing option. For applications where the ore is abrasive and not amenable to RIP, due to the rate of resin consumption, Paste Thickeners to remove the bulk of the solids, followed by RIP, was found to be the most economic processing option at leach liquor concentrations below 200 mg/L. However, for leach liquor concentrations above 200 mg/L, a CCD-circuit followed by Sx using BPC was again the most economic favourable route

  8. A Technique Research on Disposing Alkali Pulp-making Black Liquor with Bagasse by Recovery and Recycle Suitability%碱法蔗渣制浆黑液循环处理技术研究

    Institute of Scientific and Technical Information of China (English)

    穆环珍; 杨问波; 姚春丽; 黄衍初; 何艳明; 王建平; 袁庆波; 江渝

    2000-01-01

    The mechanism and technique to treat black liquor from alkali pulp-making with bagasse was studied. The result shows that this technique is more applicability. By this way, pulping black liquor can be disposed overall. Two utility products will be recovered and the liquid will be recycled to pulping at the same time. The materials of acidification will be translated into pulping reagent and reused to pulp-making. The properties of the pulp and paper reused the liquid are all right.%对碱法蔗渣制浆黑液良性循环处理技术路线及原理进行研究。研究结果表明,此技术路线可行,制浆黑液将被全部处理,同时实现了液体回用和回收两种实用价值好的产品目标。处理黑液所用的酸化剂转化为制浆药液成分回用于制浆蒸煮,得到的浆、纸性能良好。

  9. The kinetics of the gasification of black liquor. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Richards, Tobias; Theliander, Hans; Wintoko, Joko [Chalmers Univ. of Technology, Goeteborg (Sweden). Forest Products and Chemical Engineering

    2004-05-01

    Within the project, a special equipment has been manufactured in order to perform gasification experiments on single black liquor droplets. There are possibilities with the equipment to dynamically measure the weight of the droplet as well as its center temperature. Furthermore, some key gases (CO{sub 2}, CO, H{sub 2}S, CH{sub 4} and SO{sub 2}) are continuously measured. It is also possible to follow the gasification stages visually through a glass window. Parallel with this, a mathematical model has been developed to describe the gasification. It consists of both reaction kinetics and transport phenomenon. As a first step, the temperature profile was modeled and after that the model has been expanded to describe the swelling.

  10. INVESTIGATION OF FUEL CHEMISTRY AND BED PERFORMANCE IN A FLUIDIZED BED BLACK LIQUOR STEAM REFORMER

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Whitty

    2003-12-01

    The University of Utah project ''Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer'' (DOE award number DE-FC26-02NT41490) was developed in response to a solicitation for projects to provide technical support for black liquor and biomass gasification. The primary focus of the project is to provide support for a DOE-sponsored demonstration of MTCI's black liquor steam reforming technology at Georgia-Pacific's paper mill in Big Island, Virginia. A more overarching goal is to improve the understanding of phenomena that take place during low temperature black liquor gasification. This is achieved through five complementary technical tasks: (1) construction of a fluidized bed black liquor gasification test system, (2) investigation of bed performance, (3) evaluation of product gas quality, (4) black liquor conversion analysis and modeling and (5) computational modeling of the Big Island gasifier. Four experimental devices have been constructed under this project. The largest facility, which is the heart of the experimental effort, is a pressurized fluidized bed gasification test system. The system is designed to be able to reproduce conditions near the black liquor injectors in the Big Island steam reformer, so the behavior of black liquor pyrolysis and char gasification can be quantified in a representative environment. The gasification test system comprises five subsystems: steam generation and superheating, black liquor feed, fluidized bed reactor, afterburner for syngas combustion and a flue gas cooler/condenser. The three-story system is located at University of Utah's Industrial Combustion and Gasification Research Facility, and all resources there are available to support the research.

  11. Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Whitty

    2007-06-30

    University of Utah's project entitled 'Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer' (DOE Cooperative Agreement DE-FC26-02NT41490) was developed in response to a solicitation released by the U.S. Department of Energy in December 2001, requesting proposals for projects targeted towards black liquor/biomass gasification technology support research and development. Specifically, the solicitation was seeking projects that would provide technical support for Department of Energy supported black liquor and biomass gasification demonstration projects under development at the time.

  12. System aspects of black liquor gasification - Consequences for both industry and society

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-01

    The pulp and paper industry consumes large quantities of biofuels (mainly bark and black liquor) to satisfy process requirements. Biomass is however a limited resource, and biofuel usage should therefore be as effective as possible. Modern pulp mills and integrated pulp and paper mills have excess fuel compared to the amounts needed to satisfy the process steam demand. The excess fuel is often used for cogeneration of electric power in CHP units. For integrated pulp and paper mills, this usually requires import of supplementary fuel to the plant. For market pulp mills, the excess internal biofuel quantities are sufficient to also allow electric power generation in condensing power plant units. If biofuel availability at a reasonable price is limited, import/export to, from a mill changes the amount of such biofuel available to alternative users. The goal of this thesis is to compare different mill powerhouse technologies and CHP plant configurations (including conventional recovery boiler technology and black liquor gasification technology) in order to identify the technology and CHP plant configuration that can produce the most electric power output from a given fuel resource for a given process steam demand. Different process steam demand levels for different representative mill types are considered. The comparison accounts for increased/decreased electricity production in an alternative energy system when biofuel is imported/exported to/from from the mill. The alternative energy system considered includes a district heating system with CHP capacity and natural gas fired combined cycle power plant capacity. The results show that black liquor gasification is in all cases considered an attractive powerhouse recovery cycle technology compared to conventional recovery boiler technology. If the marginal electric power generation efficiency for biofuel exported to the reference alternative energy system is 49%, excess mill internal biofuel should be used on mill

  13. Material Characterization and Analysis for Selection of Refractories Used in Black Liquor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James Gordon [ORNL; Keiser, James R [ORNL; Meisner, Roberta A [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL)

    2010-01-01

    Black liquor gasification provides the pulp and paper industry with a technology which could potentially replace recovery boilers with equipment that could reduce emissions and, if used in a combined cycle system, increase the power production of the mill allowing it to be a net exporter of electrical power. In addition, rather than burning the syngas produced in a gasifier, this syngas could be used to produce higher value chemicals or fuels. However, problems with structural materials such as the refractory lining of the reactor vessel have caused unplanned shutdowns and resulted in component replacement much sooner than originally planned. Through examination of exposed materials, laboratory corrosion tests and cooperative efforts with refractory manufacturers, many refractory materials issues in high-temperature black liquor gasification have been addressed and optimized materials have been selected for this application. In this paper, an updated summary of the characterization and analysis techniques used for refractory screening and selection will be discussed along with characteristic results from these methods which have led to the selection of optimized materials for both the hot-face and back-up linings used in this application.

  14. Utilization of black liquor as concrete admixture and set retarder aid

    Directory of Open Access Journals (Sweden)

    Samar A. El-Mekkawi

    2011-04-01

    Full Text Available The utilization of black liquor, produced by the pulp and paper industry in Egypt, as a workability aid and set retarder admixture has been investigated. This approach may help eliminate the environmentally polluting black liquor waste. It also provides a low cost by-product, which can be widely used in the construction industry. The properties of black liquor and its performance on concrete at two different ratios of water to cement have been studied. The results revealed that black liquor from rice straw pulp increases concrete workability, improves compaction, and reduces honeycombing. Moreover, it retards the initial and final set time and enhances uniform compaction. The effect of incorporating small portions of silica fume has been investigated. The ageing effect of this material over a period of one year, to determine its safe storage period, has been studied. Finally, this admixture was found to comply with the relevant Egyptian standards.

  15. Effect of pulsation on black liquor gasification. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Zinn, B.T.; Jagoda, J.; Jeong, H.; Kushari, A.; Rosen, L.J.

    1998-12-01

    Pyrolysis is an endothermic process. The heat of reaction is provided either by partial combustion of the waste or by heat transfer from an external combustion process. In one proposed system black liquor is pyrolized in a fluidized bed to which heat is added through a series of pulse combustor tail pipes submerged in the bed material. This system appears promising because of the relatively high heat transfer in pulse combustors and in fluidized beds. Other advantages of pulse combustors are discussed elsewhere. The process is, however, only economically viable if a part of the pyrolysis products can be used to fire the pulse combustors. The overall goals of this study were to determine: (1) which is the limiting heat transfer rate in the process of transferring heat from the hot combustion products to the pipe, through the pipe, from the tail pipe to the bed and through the bed; i.e., whether increased heat transfer within the pulse combustor will significantly increase the overall heat transfer rate; (2) whether the heat transfer benefits of the pulse combustor can be utilized while maintaining the temperature in the bed within the narrow temperature range required by the process without generating hot spots in the bed; and (3) whether the fuel gas produced during the gasification process can be used to efficiently fire the pulse combustor.

  16. Integrating black liquor gasification with pulping - Process simulation, economics and potential benefits

    Science.gov (United States)

    Lindstrom, Erik Vilhelm Mathias

    Gasification of black liquor could drastically increase the flexibility and improve the profit potential of a mature industry. The completed work was focused on research around the economics and benefits of its implementation, utilizing laboratory pulping experiments and process simulation. The separation of sodium and sulfur achieved through gasification of recovered black liquor, can be utilized in processes like modified continuous cooking, split sulfidity and green liquor pretreatment pulping, and polysulfide-anthraquinone pulping, to improve pulp yield and properties. Laboratory pulping protocols have been developed for these modified pulping technologies and different process options evaluated. The process simulation work around BLG has led to the development of a WinGEMS module for the low temperature MTCI steam reforming process, and case studies comparing a simulated conventional kraft process to different process options built around the implementation of a BLG unit operation into the kraft recovery cycle. Pulp yield increases of 1-3% points with improved product quality, and the potential for capital and operating cost savings relative to the conventional kraft process have been demonstrated. Process simulation work has shown that the net variable operating cost for a pulping process using BLGCC is highly dependent on the cost of lime kiln fuel and the selling price of green power to the grid. Under the assumptions taken in the performed case study, the BLGCC process combined with split sulfidity or PSAQ pulping operations had net variable operating cost 2-4% greater than the kraft reference. The influence of the sales price of power to the grid is the most significant cost factor. If a sales price increase to 6 ¢/KWh for green power could be achieved, cost savings of about $40/ODtP could be realized in all investigated BLG processes. Other alternatives to improve the process economics around BLG would be to modify or eliminate the lime kiln unit

  17. Improved Materials for High-Temperature Black Liquor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, J.R.; Hemrick, J.G.; Gorog, J.P.; Leary, R.

    2006-06-29

    with fusion-cast magnesia-alumina spinel refractory, which appears to be the most resistant to degradation found to date, exhibiting over a year of service life and expected to be capable of over two years of service life. Regarding the use of refractory mortar, it was found that expansion of the current chrome-alumina mortar when subjected to black liquor smelt is likely contributing to the strains seen on the vessel shell. Additionally, the candidate high-alumina mortar that was originally proposed as a replacement for the current chrome-alumina mortar also showed a large amount of expansion when subjected to molten smelt. A UMR experimental mortar, composed of a phosphate bonded system specifically designed for use with fusion-cast magnesium-aluminum spinel, was found to perform well in the molten smelt environment. Strain gauges installed on the gasifier vessel shell provided valuable information about the expansion of the refractory, and a new set of strain gauges and thermocouples has been installed in order to monitor the loading caused by the currently installed spinel refractory. These results provide information for a direct comparison of the expansion of the two refractories. Measurements to date suggest that the fusion-cast magnesia-alumina spinel is expanding less than the fusion-cast {alpha}/{beta}-alumina used previously. A modified liquor nozzle was designed and constructed to test a number of materials that should be more resistant to erosion and corrosion than the material currently used. Inserts made of three erosion-resistant metallic materials were fabricated, along with inserts made of three ceramic materials. The assembled system was sent to the New Bern mill for installation in the gasifer in 2005. Following operation of the gasifier using the modified nozzle, inserts should be removed and analyzed for wear by erosion/corrosion. Although no materials have been directly identified for sensor/thermocouple protection tubes, several of the

  18. Numerical modelling of the CHEMREC black liquor gasification process. Conceptual design study of the burner in a pilot gasification reactor

    Energy Technology Data Exchange (ETDEWEB)

    Marklund, Magnus

    2001-02-01

    The work presented in this report is done in order to develop a simplified CFD model for Chemrec's pressurised black liquor gasification process. This process is presently under development and will have a number of advantages compared to conventional processes for black liquor recovery. The main goal with this work has been to get qualitative information on influence of burner design for the gas flow in the gasification reactor. Gasification of black liquor is a very complex process. The liquor is composed of a number of different substances and the composition may vary considerably between liquors originating from different mills and even for black liquor from a single process. When a black liquor droplet is gasified it loses its organic material to produce combustible gases by three stages of conversion: Drying, pyrolysis and char gasification. In the end of the conversion only an inorganic smelt remains (ideally). The aim is to get this smelt to form a protective layer, against corrosion and heat, on the reactor walls. Due to the complexity of gasification of black liquor some simplifications had to be made in order to develop a CFD model for the preliminary design of the gasification reactor. Instead of modelling droplets in detail, generating gas by gasification, sources were placed in a prescribed volume where gasification (mainly drying and pyrolysis) of the black liquor droplets was assumed to occur. Source terms for the energy and momentum equations, consistent with the mass source distribution, were derived from the corresponding control volume equations by assuming a symmetric outflow of gas from the droplets and a uniform degree of conversion of reactive components in the droplets. A particle transport model was also used in order to study trajectories from droplets entering the reactor. The resulting model has been implemented in a commercial finite volume code (AEA-CFX) through customised Fortran subroutines. The advantages with this simple

  19. Form transition of sodium during combustion of black liquor coal slurry

    Institute of Scientific and Technical Information of China (English)

    LAN Ze-quan; CAO Xin-yu; ZHOU Jun-hu; LIU Jian-zhong; CHENG Jun; CEN Ke-fa

    2008-01-01

    Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction analyses. As well, detailed analyses of the amounts of major mineral elements along thickness gradients of representative ash samples were carried out. The elements, including Na, Si, Al, S and Cl were analyzed by the advanced electron probe microanalyzer equipment, which provid evidence and interpretation for the analytical results of XRD. The findings indicate that the occurrence form of sodium has experi-enced important changes during the combustion of black liquor coal slurry, which translated into nepheline, thenardite, sodium sulfate, sodium chloride, sodium silicoaluminate, hauyne and other phases containing sodium, from NaOH, Na2CO3 and Na2S in raw fuel. Of all the sodium compounds, nepheline, thenardite and sodium sulfate are the most important forms of Na in solid com-bustion residues. Such a transformation of Na during the combustion of black liquor coal slurry resulted in a considerable impact on ash deposition and is not only different from the raw coal and papermaking black liquors, but is also affected by local circum-stances in the combustion furnace. Amounts of Na, S and Cl in ash deposits from low temperature zones were larger than those from high temperature zones. Our findings should provide important theoretical instructions for industrial applications of black liquor coal slurry.

  20. Improved Materials for High-Temperature Black Liquor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, J.R.; Hemrick, J.G.; Gorog, J.P.; Leary, R.

    2006-06-29

    with fusion-cast magnesia-alumina spinel refractory, which appears to be the most resistant to degradation found to date, exhibiting over a year of service life and expected to be capable of over two years of service life. Regarding the use of refractory mortar, it was found that expansion of the current chrome-alumina mortar when subjected to black liquor smelt is likely contributing to the strains seen on the vessel shell. Additionally, the candidate high-alumina mortar that was originally proposed as a replacement for the current chrome-alumina mortar also showed a large amount of expansion when subjected to molten smelt. A UMR experimental mortar, composed of a phosphate bonded system specifically designed for use with fusion-cast magnesium-aluminum spinel, was found to perform well in the molten smelt environment. Strain gauges installed on the gasifier vessel shell provided valuable information about the expansion of the refractory, and a new set of strain gauges and thermocouples has been installed in order to monitor the loading caused by the currently installed spinel refractory. These results provide information for a direct comparison of the expansion of the two refractories. Measurements to date suggest that the fusion-cast magnesia-alumina spinel is expanding less than the fusion-cast {alpha}/{beta}-alumina used previously. A modified liquor nozzle was designed and constructed to test a number of materials that should be more resistant to erosion and corrosion than the material currently used. Inserts made of three erosion-resistant metallic materials were fabricated, along with inserts made of three ceramic materials. The assembled system was sent to the New Bern mill for installation in the gasifer in 2005. Following operation of the gasifier using the modified nozzle, inserts should be removed and analyzed for wear by erosion/corrosion. Although no materials have been directly identified for sensor/thermocouple protection tubes, several of the

  1. Promoted slurryability of petroleum coke-water slurry by using black liquor as an additive

    Energy Technology Data Exchange (ETDEWEB)

    Zhan, Xiuli; Zhou, Zhijie; Wang, Fuchen [Key Laboratory of Coal Gasification of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Kang, Wanzhong [School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237 (China)

    2010-10-15

    The purpose of this paper is to prepare the petroleum coke-water slurry with a maximal coke mass fraction and the superior slurry natures using black liquor as an additive. The variations of rheological properties, contact angle, fluidity, stability and zeta potential of the coke-water slurry with different black liquor dosages were investigated. It was observed that the addition of a black liquor dosage around 1.0 wt.% of the petroleum coke remarkably improved the rheological properties, fluidity and stability of the slurry, and the slurry could hold a mass of petroleum coke as high as 70 wt.%, with the superior apparent viscosity, fluidity and stability available for practical utilization. (author)

  2. Preparation of adhesive for bamboo plywood using concentrated papermaking black liquor directly

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The results indicate that the reaction time of black liquor methylating is 30 min, when the ratio of alkali to formaldehyde is controlled at approximately 0.20, decomposition rate of formaldehyde is the lowest and the effect of black liquor methylating is the best, the optimal molar ratio of phenol: formaldehyde to NaOH to H2O of preparing phenolic resin is liquor to phenolic resin, all terms of performance of black liquor phenolic resin are excellent and satisfy the requirement. All terms of performance of bamboo plywood prepared using this technique are better than that of excellent bamboo plywood of national criteria. Using this technique, the cost is depressed by 28.69% without altering the traditional adhesive producing technique flow, and without using additional equipment.

  3. Carbon black recovery

    International Nuclear Information System (INIS)

    A process and apparatus for recovering carbon black from hot smoke which comprises passing the smoke through a cyclone separation zone following cooling, then through aggregate filter beds and regeneration of filter beds with clean off-gas which is recycled to the carbon black reaction zone as quench

  4. Physical properties of kraft black liquor. Final report. Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, A.L.

    1983-12-01

    Methods were selected, equipment installed, and procedures developed for determining rheological properties; for determining thermal properties (stability, density, thermal expansion, and heat capacity); for purification and characterization of lignin (glass transition, stability, weight average molecular weight, and number average molecular weight); and for performing chemical analyses (negative inorganic ions, positive inorganic ions, acid organic salts, lignin, and total solids). A strategy for pulping to supply test liquors was developed, and a statistically designed pulping experiment was specified for a Southern softwood species. Arrangements were made for performing initial pulping work in an industrial pilot plant, and a preliminary set of pulping experiments were conducted. Liquors from the preliminary pulping experiments were used to test procedures and to determine reproducibility of the experiment. Literature was also surveyed and preliminary selection of designs for a pilot digester, and for equipment to determine surface tension were made.

  5. Assessment of the release of atomic Na from a burning black liquor droplet using quantitative PLIF

    Energy Technology Data Exchange (ETDEWEB)

    Saw, Woei L.; Nathan, Graham J. [Centre for Energy Technology, The Environment Institute, School of Mechanical Engineering, The University of Adelaide, SA 5005 (Australia); Ashman, Peter J.; Alwahabi, Zeyad T. [Centre for Energy Technology, The Environment Institute, School of Chemical Engineering, The University of Adelaide, SA 5005 (Australia)

    2009-07-15

    The quantitative measurement of atomic sodium (Na) release, at high concentration, from a burning black liquor droplet has been demonstrated using a planar laser-induced fluorescence (PLIF) technique, corrected for fluorescence trapping. The local temperature of the particle was measured to be approximately 1700 C, at a height of 10 mm above a flat flame burner. The PLIF technique was used to assess the temporal release of atomic Na from the combustion of black liquor and compare it with the Na concentration in the remaining smelt. A first-order model was made to provide insight using a simple Plug Flow Reactor model based on the independently measured concentration of residual Na in the smelt as a function of time. This model also required the dilution ratio of the combustion products in the flat flame entrained into the plume gas from the black liquor particle to be estimated. The key findings of these studies are: (i) the peak concentration of atomic Na from the combustion of the black liquor droplets is around 1.4 ppm; (ii) very little atomic Na is present during the drying, devolatilisation or char combustion stages; and (iii) the presence of atomic Na during smelt phase dominates over that from the other combustion stages. (author)

  6. Recovery of Flavonoids from Orange Press Liquor by an Integrated Membrane Process

    Directory of Open Access Journals (Sweden)

    Alfredo Cassano

    2014-08-01

    Full Text Available Orange press liquor is a by-product generated by the citrus processing industry containing huge amounts of natural phenolic compounds with recognized antioxidant activity. In this work, an integrated membrane process for the recovery of flavonoids from orange press liquors was investigated on a laboratory scale. The liquor was previously clarified by ultrafiltration (UF in selected operating conditions by using hollow fiber polysulfone membranes. Then, the clarified liquor with a total soluble solids (TSS content of 10 g·100 g−1 was pre-concentrated by nanofiltration (NF up to 32 g TSS 100 g−1 by using a polyethersulfone spiral-wound membrane. A final concentration step, up to 47 g TSS 100 g−1, was performed by using an osmotic distillation (OD apparatus equipped with polypropylene hollow fiber membranes. Suspended solids were completely removed in the UF step producing a clarified liquor containing most part of the flavonoids of the original press liquor due to the low rejection of the UF membrane towards these compounds. Flavanones and anthocyanins were highly rejected by the NF membrane, producing a permeate stream with a TSS content of 4.5 g·100 g−1. An increasing of both the flavanones and anthocyanins concentration was observed in the NF retentate by increasing the volume reduction factor (VRF. The final concentration of flavonoids by OD produced a concentrated solution of interest for nutraceutical and pharmaceutical applications.

  7. Investigation of Pressurized Entrained-Flow Kraft Black Liquor Gasification in an Industrially Relevant Environment

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Whitty

    2008-06-30

    The University of Utah's project 'Investigation of Pressurized Entrained-Flow Kraft Black Liquor Gasification in an Industrially Relevant Environment' (U.S. DOE Cooperative Agreement DE-FC26-04NT42261) was a response to U.S. DOE/NETL solicitation DE-PS36-04GO94002, 'Biomass Research and Development Initiative' Topical Area 4-Kraft Black Liquor Gasification. The project began September 30, 2004. The objective of the project was to improve the understanding of black liquor conversion in high pressure, high temperature reactors that gasify liquor through partial oxidation with either air or oxygen. The physical and chemical characteristics of both the gas and condensed phase were to be studied over the entire range of liquor conversion, and the rates and mechanisms of processes responsible for converting the liquor to its final smelt and syngas products were to be investigated. This would be accomplished by combining fundamental, lab-scale experiments with measurements taken using a new semi-pilot scale pressurized entrained-flow gasifier. As a result of insufficient availability of funds and changes in priority within the Office of Biomass Programs of the U.S. Department of Energy, the research program was terminated in its second year. In total, only half of the budgeted funding was made available for the program, and most of this was used during the first year for construction of the experimental systems to be used in the program. This had a severe impact on the program. As a consequence, most of the planned research was unable to be performed. Only studies that relied on computational modeling or existing experimental facilities started early enough to deliver useful results by the time to program was terminated Over the course of the program, small scale (approx. 1 ton/day) entrained-flow gasifier was designed and installed at the University of Utah's off-campus Industrial Combustion and Gasification Research Facility. The system is

  8. New black liquor combustion characteristics II; Mustalipeaen uudet poltto-ominaisuudet II

    Energy Technology Data Exchange (ETDEWEB)

    Hupa, M.; Backman, R.; Bostroem, S.; Forssen, M.; Uusikartano, T. [Aabo Akademi, Turku (Finland)

    1996-12-01

    In an earlier study (LIEKKI 2, Y 17), the combustion characteristics of 17 liquors of different origin were studied by four laboratory tests. These tests were (1) single droplet burning, (2) single droplet pyrolysis, (3) pressurized gasification, and (4) calculation of melting properties of inorganic carryover particles. The study showed that there are big differences between liquors of different origin. These differences strongly affect the combustion properties, i.e. pyrolysis and burning times, swelling, and fouling tendency of heat transfer surfaces. The objective for the present research project was to investigate the reasons why some properties affect the combustion behavior more than others. The project is partly complementary to the previous study, partly a more detailed study of some of the phenomena observed earlier. The work constitutes of the following studies: (1) further study of several more liquors by the same methods, (2) pyrolysis swelling in inert gas (N{sub 2}) at two temperatures, 700 deg C and 900 deg C, (3) effect of heat treatment black liquors, (4) effect of addition of sodium compounds to a virgin black liquor, (5) data treatment and correlations, (6) nitrogen oxide formation tendency. (author)

  9. Analysing performance of bio-refinery systems by integrating black liquor gasification with chemical pulp mills

    Energy Technology Data Exchange (ETDEWEB)

    Naqvi, Muhammad R.

    2012-07-01

    Mitigation of climate change and energy security are major driving forces for increased biomass utilization. The pulp and paper industry consumes a large proportion of the biomass worldwide including bark, wood residues, and black liquor. Due to the fact that modern mills have established infrastructure for handling and processing biomass, it is possible to lay foundation for future gasification based bio-refineries to poly-produce electricity, chemicals or bio-fuels together with pulp and paper products. There is a potential to export electricity or bio-fuels by improving energy systems of existing chemical pulp mills by integrating gasification technology. The present study investigates bio-fuel alternatives from the dry black liquor gasification (BLG) system with direct causticization and direct methane production from the catalytic hydrothermal gasification (CHG) system. The studied systems are compared with bio-fuel alternatives from the Chemrec BLG system and the improvements in the energy systems of the pulp mill are analyzed. The results are used to identify the efficient route based on system performance indicators e.g. material and energy balances to compare BLG systems and the conventional recovery boiler system, potential biofuel production together with biomass to biofuel conversion efficiency, energy ratios, potential CO{sub 2} mitigation combining on-site CO{sub 2} reduction using CO{sub 2} capture and potential CO{sub 2} offsets from biofuel use, and potential motor fuel replacement. The results showed that the dry BLG system for synthetic natural gas (SNG) production offers better integration opportunities with the chemical pulp mill in terms of overall material and energy balances. The biofuel production and conversion efficiency are higher in the CHG system than other studied configurations but at a cost of larger biomass import. The dry BLG system for SNG production achieved high biomass to biofuel efficiency and considerable biofuel production

  10. Direct Causticizing for Black Liquor Gasification in a Circulating Fluidized Bed

    Energy Technology Data Exchange (ETDEWEB)

    Scott Sinquefield; Xiaoyan Zeng, Alan Ball

    2010-03-02

    Gasification of black liquor (BLG) has distinct advantages over direct combustion in Tomlinson recovery boilers. In this project we seek to resolve causticizing issues in order to make pressurized BLG even more efficient and cost-effective. One advantage of BLG is that the inherent partial separation of sulfur and sodium during gasification lends itself to the use of proven high yield variants to conventional kraft pulping which require just such a separation. Processes such as polysulfide, split sulfidity, ASAQ, and MSSAQ can increase pulp yield from 1% to 10% over conventional kraft but require varying degrees of sulfur/sodium separation, which requires additional [and costly] processing in a conventional Tomlinson recovery process. However during gasification, the sulfur is partitioned between the gas and smelt phases, while the sodium all leaves in the smelt; thus creating the opportunity to produce sulfur-rich and sulfur-lean white liquors for specialty pulping processes. A second major incentive of BLG is the production of a combustible product gas, rich in H2 and CO. This product gas (a.k.a. “syngas”) can be used in gas turbines for combined cycle power generation (which is twice as efficient as the steam cycle alone), or it can be used as a precursor to form liquid fuels, such as dimethyl ether or Fischer Tropsh diesel. There is drawback to BLG, which has the potential to become a third major incentive if this work is successful. The causticizing load is greater for gasification of black liquor than for combustion in a Tomlinson boiler. So implementing BLG in an existing mill would require costly increases to the causticizing capacity. In situ causticizing [within the gasifier] would handle the entire causticizing load and therefore eliminate the lime cycle entirely. Previous work by the author and others has shown that titanate direct causticizing (i.e. in situ) works quite well for high-temperature BLG (950°C), but was limited to pressures below

  11. Effect of pulping variables on enthalpy of kraft black liquors: Empirical predictive models

    Energy Technology Data Exchange (ETDEWEB)

    Zaman, A.A.; Fricke, A.L. [Univ. of Florida, Gainesville, FL (United States). Dept. of Chemical Engineering

    1996-07-01

    The effects of pulping variables on enthalpy of slash pine kraft black liquors from a 2{sup k} + 2k + 1 (k = 4) central composite design pulping experiments that were performed in a large pilot scale digester have been studied. The four cooling variables were effective alkali, sulfidity, cooking temperature, and time at temperature. In all cases, the white liquor was adjusted to a causticizing efficiency of 85% and a reduction of 93% with Na{sub 2}CO{sub 3} and Na{sub 2}SO{sub 4}. The enthalpy of these liquors was determined over wide ranges of temperature and solids concentrations using a Setaram C-80 calorimeter. In this work, previous models for enthalpy-concentration relations were used to perform a systematic study on the effects of pulping conditions on enthalpy and to develop statistically based quantitative models for enthalpy as a function of pulping variables. These results are presented, and their utility is discussed.

  12. Comparison of pulp-mill-integrated hydrogen production from gasified black liquor with stand-alone production from gasified biomass

    International Nuclear Information System (INIS)

    When gasified black liquor is used for hydrogen production, significant amounts of biomass must be imported. This paper compares two alternative options for producing hydrogen from biomass: (A) pulp-mill-integrated hydrogen production from gasified back liquor; and (B) stand-alone production of hydrogen from gasified biomass. The comparison assumes that the same amount of biomass that is imported in Alternative A is supplied to a stand-alone hydrogen production plant and that the gasified black liquor in Alternative B is used in a black liquor gasification combined cycle (BLGCC) CHP unit. The comparison is based upon equal amounts of black liquor fed to the gasifier, and identical steam and power requirements for the pulp mill. The two systems are compared on the basis of total CO2 emission consequences, based upon different assumptions for the reference energy system that reflect different societal CO2 emissions reduction target levels. Ambitions targets are expected to lead to a more CO2-lean reference energy system, in which case hydrogen production from gasified black liquor (Alternative A) is best from a CO2 emissions' perspective, whereas with high CO2 emissions associated with electricity production, hydrogen from gasified biomass and electricity from gasified black liquor (Alternative B) is preferable. (author)

  13. Antioxidant Activity of Lignin Phenolic Compounds Extracted from Kraft and Sulphite Black Liquors

    Directory of Open Access Journals (Sweden)

    Ana Paula Duarte

    2010-12-01

    Full Text Available The antioxidant activity of the phenolic compounds present in industrial black liquors obtained from the two cooking processes (kraft and sulphite used in Portugal to produce Eucalyptus globulus pulp was evaluated. The black liquors treated at several pH values were extracted with ethyl acetate. Phenolic fractions were further separated by liquid chromatography of the crude extracts of kraft liquor at pH = 6 and sulphite liquor at the original pH. Total phenolic content was determined in terms of gallic acid equivalents (Folin-Ciocalteu colorimetric method, and the antioxidant activity in the crude extracts at several pH values and in the separated fractions was measured using the DPPH test for radical scavenging capacity. The total phenolic content of crude extracts and separated fractions ranged from 92.7 to 181.6 and from 91.6 to 1,099.6 mg GAE/g, respectively, while the antioxidant activity index (AAI ranged from 2.20 to 3.41 and from 2.21 to 11.47 respectively, showing very strong antioxidant activity in all studied cases. The fractions separated by column chromatography were submitted to mass spectrometry analysis and the results were compared to others in the literature of natural products, mainly from Eucalyptus, and the characteristic bands of functional groups were identified by 1H-NMR and FTIR. These methods allowed the identification of 17 phenolic compounds.

  14. Characterization of combustion properties of black liquor by gas-liquid chromatography; Mustalipeaen poltto-ominaisuuksien karakterisointi kaasukromatografian avulla

    Energy Technology Data Exchange (ETDEWEB)

    Alen, R.; Barck, M.; Liukkonen, S.; Louhelainen, J. [Jyvaeskylae Univ. (Finland). Dept. of Chemistry

    1995-11-01

    A new idea of characterizing the combustion properties (burning time and swelling) of black liquor is presented in this paper. It is based on detailed analysis low-molecular-mass degradation products (aliphatic carboxylic acids and ligninmonomers) derived from wood feedstock. The complex mixture of these substances can be resolved into single components by using gas chromatography (GC). The method is theoretically based on the fact that the concentration some of these low-molecular-mass constituents and the combustion properties of black liquor are both systematically changing as the cook proceeds. For this reason, the combustion behavior of black liquors from the different stage delignification can be predicted with reasonable accurance on the basis of the GLC data. The preliminary tests performed with the kraft black liquors from conventional lab-scale cooking of softwood and hardwood look promising. (author)

  15. Lignin Prepared by Ultrafiltration of Black Liquor : Investigation of Solubility, Viscosity, and Ash Content

    OpenAIRE

    Giummarella, Nicola; Lindgren, Christofer; Lindström, Mikael; Henriksson, Gunnar

    2016-01-01

    Technical lignin, which can be potentially obtained in large amounts as a by-product from kraft pulping, represents a potential resource for manufacturing fuels and chemicals. Upgrading of lignin, by lowering its molecular weight, is a valuable alternative to precipitation from black liquor, which occurs in the Lignoboost process. The solubility properties of Lignoboost lignin and filtered lignin in a number of technically feasible solvents were compared, and it was found that both lignins we...

  16. Analysing performance of bio-refinery systems by integrating black liquor gasification with chemical pulp mills

    OpenAIRE

    Naqvi, Muhammad Raza

    2012-01-01

    Mitigation of climate change and energy security are major driving forces for increased biomass utilization. The pulp and paper industry consumes a large proportion of the biomass worldwide including bark, wood residues, and black liquor. Due to the fact that modern mills have established infrastructure for handling and processing biomass, it is possible to lay foundation for future gasification based bio-refineries to poly-produce electricity, chemicals or bio-fuels together with pulp and pa...

  17. ANALYSIS ON COMPOSITION OF FOULANTS FROM ALKALINE WHEAT STRAW BLACK LIQUOR AND DISCUSSION ON ITS FORMING MECHANISM

    Institute of Scientific and Technical Information of China (English)

    Yuan-yuan Jia

    2004-01-01

    Analysis on foulants shows that: the elements(except for C, H and O) in foulants formed during evaporating alkaline wheat straw black liquor are Si,Ca, K, Na, Mg and Al; Si and Ca account for about 36% of the weight of foulants; The organic ingredients amout to about 20% of the foulant;Rhodesite (Ca,K,Na)8Si16O40 @llH2O is the main composition in foulants.The fouling mechanism of wheat black liquor is quite different from that of soft/hard wood black liquor,because the content of Si inside wheat straw black liquor is much more than that of soft/hard wood black liquor. Complex chemical reactions occur when evaporating wheat straw black liquor. The author considers that colloid H2SiO3 plays an important role in the process. The minerals produced by reactions between H2SiO3, with anion charges and positive ions, such as Ca2+, K+, Na+, etc. Further investigation on the process should be done.The fractal theory is used to analyze the fouling geometric texture. The fractal dimension values D of foulants are also calculated.

  18. ANALYSIS ON COMPOSITION OF FOULANTS FROM ALKALINE WHEAT STRAW BLACK LIQUOR AND DISCUSSION ON ITS FORMING MECHANISM

    Institute of Scientific and Technical Information of China (English)

    Yuan-yuanJia

    2004-01-01

    Analysis on foulants shows that: the elements (except for C, H and O) in foulants formed during evaporating alkaline wheat straw black liquor are Si,Ca, K, Na, Mg and AI; Si and Ca account for about 36% of the weight of foulants, The organic ingredients about to about 20% of the foulant; Rhodesite (Ca,K,Na)8Si16O40 ·11H2O is the main composition in foulants. The fouling mechanism of wheat black liquor is quite different from that of soft/hard wood black liquor, because the content of Si inside wheat straw black liquor is much more than that of soft/hard wood black liquor. Complex chemical reactions occur when evaporating wheat straw black liquor. The author considers that colloid H2SiO3 plays an important role in the process. The minerals produced by reactions between H2SiO3, with anion charges and positive ions, such as Ca2-, K-, Na-, etc. Further investigation on the process should be done. The fractal theory is used to analyze the fouling geometric texture. The fractal dimension values D of foulants are also calculated.

  19. Green chemicals from pulp production black liquor by partial wet oxidation.

    Science.gov (United States)

    Muddassar, Hassan Raja; Melin, Kristian; de Villalba Kokkonen, Daniela; Riera, Gerard Viader; Golam, Sarwar; Koskinen, Jukka

    2015-11-01

    To reduce greenhouse gas emissions, more sustainable sources of energy, fuel and chemicals are needed. Biomass side streams such as black liquor, which is a by-product of pulp production, has the potential to be used for this purpose. The aim of the study was the production of carboxylic acids, such as lactic acid, formic acid and acetic acid, from kraft and non-wood black liquor. The processes studied were partial wet oxidation (PWO) and catalytic partial wet oxidation (CPWO). The results show that the yield of carboxylic acid is higher when treated by PWO than the results from CPWO at temperatures of 170 °C and 230 °C. The results shows that the PWO process can increase the yield of carboxylic acids and hydroxy acids in black liquor, reduce lignin content and decrease pH, which makes further separation of the acids more favourable. The hydroxy acids are valuable raw materials for biopolymers, and acetic acid and formic acid are commonly used chemicals conventionally produced from fossil feedstock. PMID:26377325

  20. Electrocoagulation treatment of black liquor from soda-AQ pulping of wheat straw.

    Science.gov (United States)

    Rastegarfar, N; Behrooz, R; Bahramifar, N

    2015-02-01

    The effect of electrocoagulation treatment was investigated on black liquor from soda-anthraquinone (AQ) pulping of wheat straw. Removal of phenol, chemical oxygen demand (COD), color, total suspended solids (TSS), total dissolved solids (TDS), and total solids (TS) from black liquor was investigated at different current densities by using aluminum electrodes at various electrolysis times (10, 25, 40, 55, and 70 min) and pH levels (3, 5, 7, 9, and 10.5). It was observed that at 16 V, electrolysis time of 55 min and current density of 61.8 mA/cm(2) were sufficient for the removal of the pollutants. Energy consumption was evaluated as an important cost-relation parameter. Results showed that the electrocoagulation treatment reduced color intensity from the high initial value of 18,750 to 220 PCU. This was strongly influenced by the pH level of the wastewater. In addition, it was found that the removal efficiency increased with increasing of current density. The maximum efficiencies for removal were 98.8, 81, 80, 92, 61, and 68 % for color, phenol, COD, TSS, TDS, and TS, respectively. The lowest energy consumption values were obtained at neutral pH after 55 min. Electrocoagulation was found to be an effective, simple, and low-cost technique to treat black liquor.

  1. New Advanced Technology on Waste Resourcelization of the Black Pulping Liquor

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yi; HAN Yuan-yuan; ZHANG Dong-xiang

    2007-01-01

    Combining the characteristics of the black pulping liquor that contains a lot of lignin and other biomass resources, the technology of comprehensive waste utilization is employed. The reconstructive preparation of modified urea-formaldehyde glue by adding black pulping liquor and the application in extruding the medium density fibre board using this modified urea-formaldehyde glue is researched. Results show that when applying the preparation technology that alkaline reaction and then weak acid reaction, the appropriate preparation process is as follows: the adding urea process is divided into three stages (proportion 2∶1∶1); the pH value is 8.0, and the reaction time is 40min in the addition reaction stage; the pH value will be naturally reduced to 3.5-5.0, and the reaction time is 45min in the aggregation reaction stage; the pH value is 8.0 in the urea complement stage. And the optimal condition of the reconstructive preparation the modified urea-formaldehyde glue is adding the condensed black pulping liquor after hydroxymethylation in the beginning of polycondensation reaction by 5% proportion. The application in extruding medium density fibre board with this modified urea-fosmaldehyde glue is proved feasible.

  2. Evaluation of treated black liquor used as dispersant of concentrated coal-water slurry

    Energy Technology Data Exchange (ETDEWEB)

    Mingsong Zhou; Qian Kong; Bing Pan; Xueqing Qiu; Dongjie Yang; Hongming Lou [South China University of Technology, Guangzhou (China). State Key Laboratory of Pulp and Paper Engineering

    2010-03-15

    The paper making waste liquor is a great water pollution source and much work has been done over the years to overcome this challenge. We present here a solution of black liquor used as dispersant of coal-water slurry (abbreviated as CWS) following chemical treatment. The treated black liquor (abbreviated as TBL) is used to prepare CWS for three bituminous coals, and the factors influencing its dispersing ability and the properties of CWS are investigated. The results show that the increasing sulfonating agent and formaldehyde dosage increase the sulfonic group content while reducing the molecular weight of TBL. The comparison with a naphthalene dispersant shows that TBL has a similar or better dispersing ability, and the large quantity of sulfonic groups engrafted in lignin molecules and the markedly increase of molecular weight are considered the key reason for the excellent performance of TBL. Moreover, the change of the molecular configuration from globular to flocculent in solution observed by TEM is also considered as an important reason for the excellent dispersing effect of TBL for CWS. 25 refs., 6 figs., 7 tabs.

  3. Technoeconomical evaluation of black liquor gasification processes; Teknisk ekonomisk utvaerdering av svartlutfoergasningsprocesser

    Energy Technology Data Exchange (ETDEWEB)

    Warnqvist, Bjoern; Delin, Lennart [AaF-IPK AB, Stockholm (Sweden); Theliander, Hans; Nohlgren, Ingrid [Luleaa Tekniska Universitet (Sweden). Chemical Engineering Design

    2000-06-01

    Black liquor gasification processes have been studied as an alternative to conventional chemical recovery with recovery boiler/steam turbine. Energy balances and investment costs have been calculated/estimated for four gasification processes in a model mill for 1000 ADt/d bleached kraft market pulp (according to the KAM-Mistra program, i.e. a mill with the best available technology). The original four alternatives studied were: (1) Pressurised entrained-flow high temperature gasifier (950 deg C) with smelt formation. Quencher and gas/liquor production (cf. Chemrec) with high temperature gas turbine, waste heat boiler and steam turbine; (2) Ditto with combined cycle with pressurised steam boiler and gas turbine (moderate gas turbine temperature); (3) Pressurised gasification in a fluidised bed (700 deg C) in a combined cycle with pressurised steam boiler and gas turbine; (4) Pressurised gasification in a fluidised bed with titanate for direct causticising (850-900 deg C) in a combined cycle with pressurised steam boiler and gas turbine. All systems have a bark boiler (falling bark) and steam central. All but the last system also have conventional causticising and lime kiln. All systems also have a condensing turbine to absorb the net surplus of steam that both the conventional recovery and the gasification systems produce. After the completion of the original study, a more detailed description of the Chemrec concept has been made available to us. An alternative that more closely resembles the Chemrec process has therefore been added. A more detailed description of the ABB system has not been available, but this system has also been recalculated for the same type of gas turbine that is used in the Chemrec case. We have also added the alternative that the biomass fuel is gasified and used in a combined cycle. We have furthermore added calculations with the new alternatives implemented in a hypothetical integrated mill with a need for external fuel. The development of

  4. A comprehensive program to develop correlations for the physical properties of Kraft black liquor. Interim report No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, A.L.

    1990-12-01

    Experimental effort for the program to evaluate physical properties of kraft black liquors is now proceeding well. Experimental work includes pulping, liquor analysis, lignin purification and characterization, vapor-liquid equilibria, heat capacity, heats of solution and combustion, and viscosity measurements. Measurement of thermal conductivity has not yet begun. Collection of the data necessary for development of generalized correlations is proceeding, but will require about two more years. The digester is operating very well. It is now possible to operate the digester as a closed, rotating reactor or as a batch reactor with liquor circulation. When operated with liquor circulation, temperatures within the chip bed can be monitored during cooking. Cooking is reproducible, and cooks are being performed to produce liquors for experimental studies. The digester could be further modified to permit us to conduct rapid exchange batch pulping or to permit us to simulate continuous pulping. Liquors to be used in experimental studies are concentrated in our large scale evaporator or in our small scale evaporator. The large scale evaporator is used to concentrate liquors to about 50% solids for storage and for use in studies requiring high solids liquors. The small scale evaporator is used for preparing final samples to as high as 85% solids and for measuring vapor-liquid equilibria. Liquors are now routinely analyzed to determine all components, except higher molecular weight organic acids and extractives. Lignin determination by uv-visible means has been improved. Lignin purification from black liquor has been improved and lignin molecular weights are determined routinely. Work on lignin molecular weight distribution is still not satisfactory, but recent developments holds promise.

  5. Recovery of Chromium from Waste Taning Liquors by Magnesium Oxide

    Directory of Open Access Journals (Sweden)

    Mahmood M. Barbooti

    2010-10-01

    Full Text Available This is a case study of AL-Za’afaraniya tanning factory, 15 km to the south of Baghdad, to spot light on simple chemical treatment of the discharged water to solve the environmental problems associated with its chromium content management. The treatment was extended to the recovery and reuse of chromium. Chromium was precipitated by the addition of magnesium oxide which also aid as a neutralizer for the acidic effluent. The laboratory treatment was carried out to find the optimum conditions. The wastewater samples were taken from the outline area of the tannery. Box-Wilson method was adopted to find useful relationships between the operating variables (temperature, mixing period and magnesium oxide dose and the pH and chromium content of effluent. The experimental data were successfully fitted to second order polynomial mathematical models for the treatment. The most favorable operating conditions for the treatment were: temperature, 30 ºC; mixing period, 50 min and magnesium oxide concentration, 3000 mg/L. On using the optimum conditions a mathematical model simulating the operation for the treatment was obtained as follows:Cr = 6.0848 – 0.001839 X11 – 0.105334 X12 – 0.041038 X13pH = 10.29086 – 0.001223 X11 – 0.140043 X12 – 0.00953 X13Experimentally Cr concentration was decreased to about (0.5 mg/L in wastewater after raising the pH value to (7.35 by adding magnesium oxide.

  6. Hydrometallurgical recovery of copper from leach liquor of polymetallic nodules in solvent extraction process

    Directory of Open Access Journals (Sweden)

    B. Pospiech

    2012-12-01

    Full Text Available Purpose: Purpose of this paper is to present the possibilities of copper(II recovery from the synthetic sulphate leach liquor containing cobalt(II, nickel(II and manganese(II.Design/methodology/approach: The investigations have been undertaken in order to determine the influence of major parameters on the extraction process of copper(II from the leach liquor of polymetallic manganese nodules. Copper(II ions were extracted with Kelex 100 and LIX 70 in kerosene. The effect of different parameters such as pH of aqueous phase, extractants concentration in the organic phase, concentration of sulphuric acid as the stripping reagent were investigated.Findings: The optimal conditions of metal ions selectivity extraction have been determined. Over 99% of Cu(II can be effectively extracted with 5% Kelex 100 and 10% LIX 70 at pH of 2.0 from model leach liquor in the presence of Co(II, Ni(II and Mn(II, while less than 10% of the other metals is transported to the organic phase. The selectivity of Cu(II extraction over Co(II, Ni(II and Mn(II with Kelex 100 depended upon the acidity of aqueous solution and the selectivity increased with decreasing of pH in the feed solution. Separation of Cu(II from these metal ions is very effective. Cu(II can be recovered successfully from the loaded organic phase with Kelex 100 through stripping with 2.0 M H2SO4.Practical implications: The results can be used during the hydrometallurgical recovery of metals from nodules on the industrial scale.Originality/value: The study on the solvent extraction of Cu(II using LIX 70 and Kelex 100 from leach liquor of polymetallic manganese nodules has not been reported yet. Conducting this research is therefore the most reasonable and necessary.

  7. A constructed alkaline consortium and its dynamics in treating alkaline black liquor with very high pollution load.

    Directory of Open Access Journals (Sweden)

    Chunyu Yang

    Full Text Available BACKGROUND: Paper pulp wastewater resulting from alkaline extraction of wheat straw, known as black liquor, is very difficult to be treated and causes serious environmental problems due to its high pH value and chemical oxygen demand (COD pollution load. Lignin, semicellulose and cellulose are the main contributors to the high COD values in black liquor. Very few microorganisms can survive in such harsh environments of the alkaline wheat straw black liquor. A naturally developed microbial community was found accidentally in a black liquor storing pool in a paper pulp mill of China. The community was effective in pH decreasing, color and COD removing from the high alkaline and high COD black liquor. FINDINGS: Thirty-eight strains of bacteria were isolated from the black liquor storing pool, and were grouped as eleven operational taxonomy units (OTUs using random amplified polymorphic DNA-PCR profiles (RAPD. Eleven representative strains of each OTU, which were identified as genera of Halomonas and Bacillus, were used to construct a consortium to treat black liquor with a high pH value of 11.0 and very high COD pollution load of 142,600 mg l(-1. After treatment by the constructed consortium, about 35.4% of color and 39,000 mg l(-1 (27.3% COD(cr were removed and the pH decreased to 7.8. 16S rRNA gene polymerase chain reaction denaturant gradient gel electrophoresis (PCR-DGGE and gas chromatography/mass spectrometry (GC/MS analysis suggested a two-stage treatment mechanism to elucidate the interspecies collaboration: Halomonas isolates were important in the first stage to produce organic acids that contributed to the pH decline, while Bacillus isolates were involved in the degradation of lignin derivatives in the second stage under lower pH conditions. CONCLUSIONS/SIGNIFICANCE: Tolerance to the high alkaline environment and good controllability of the simple consortium suggested that the constructed consortium has good potential for black liquor

  8. Hydrometallurgical recovery of metal values from sulfuric acid leaching liquor of spent lithium-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiangping; Chen, Yongbin; Zhou, Tao, E-mail: zhoutao@csu.edu.cn; Liu, Depei; Hu, Hang; Fan, Shaoyun

    2015-04-15

    Highlights: • Selective precipitation and solvent extraction were adopted. • Nickel, cobalt and lithium were selectively precipitated. • Co-D2EHPA was employed as high-efficiency extraction reagent for manganese. • High recovery percentages could be achieved for all metal values. - Abstract: Environmentally hazardous substances contained in spent Li-ion batteries, such as heavy metals and nocuous organics, will pose a threat to the environment and human health. On the other hand, the sustainable recycling of spent lithium-ion batteries may bring about environmental and economic benefits. In this study, a hydrometallurgical process was adopted for the comprehensive recovery of nickel, manganese, cobalt and lithium from sulfuric acid leaching liquor from waste cathode materials of spent lithium-ion batteries. First, nickel ions were selectively precipitated and recovered using dimethylglyoxime reagent. Recycled dimethylglyoxime could be re-used as precipitant for nickel and revealed similar precipitation performance compared with fresh dimethylglyoxime. Then the separation of manganese and cobalt was conducted by solvent extraction method using cobalt loaded D2EHPA. And McCabe–Thiele isotherm was employed for the prediction of the degree of separation and the number of extraction stages needed at specific experimental conditions. Finally, cobalt and lithium were sequentially precipitated and recovered as CoC{sub 2}O{sub 4}⋅2H{sub 2}O and Li{sub 2}CO{sub 3} using ammonium oxalate solution and saturated sodium carbonate solution, respectively. Recovery efficiencies could be attained as follows: 98.7% for Ni; 97.1% for Mn, 98.2% for Co and 81.0% for Li under optimized experimental conditions. This hydrometallurgical process may promise a candidate for the effective separation and recovery of metal values from the sulfuric acid leaching liquor.

  9. Bio-refinery system integrated with pulp and paper mills using black liquor gasification

    Energy Technology Data Exchange (ETDEWEB)

    Naqvi, Muhammad

    2010-07-01

    Mitigation of climate change and energy security are major driving forces for increased biomass energy utilization. The pulp and paper industry consumes a large proportion of biomass worldwide that include bark, wood residues, and black liquor. Due to the fact that modern pulp and paper industries have established infrastructure for handling and processing biomass, it is possible to lay foundation for future gasification based bio-refineries to co-produce electricity, chemicals or bio-fuels together with pulp and paper products. There is a potential to export electricity or bio-fuels by improving today's existing chemical pulp and paper mills integrating gasification technology.The present study evaluates the energy conversion performance of integrated black liquor gasification (BLG) within the chemical pulp mills in comparison with conventional pulp mill energy system. The objective is to investigate and compare various BLG technologies and bio-fuel production routes. The comparison is performed to identify the advantageous route based on system performance indicators e.g. bio-fuel production potential, fuel to product efficiency (FTPE), biomass import, overall system thermal energy efficiency, on-site CO{sub 2} reduction using carbon capture, and potential CO{sub 2} offsets from bio-fuel use in transport sector.The study on a variety of BLG configurations shows promising results for potential bio-fuel production offering significant contributions toward fossil fuel savings, emission reductions, and improved energy security. Methanol, synthetic natural gas (SNG) and dimethyl ether (DME) show promising features as potential fuel candidates. The comparative results show significantly larger bio-fuel production potential of black liquor conversion to SNG from catalytic hydrothermal gasification than DME, methanol or SNG production from the dry BLG (DBLG) and Chemrec BLG (CBLG) systems. The energy ratio of SNG production from the CHG system is higher than DME and

  10. Stability and Regeneration of Catalysts for the Destruction of Tars from Bio-mass Black Liquor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Pradeep Agrawal

    2004-09-07

    The goal of this project was to develop catalytic materials and processes that would be effective in the destruction of tars formed during the gasification of black liquor and biomass. We report here the significant results obtained at the conclusion of this two year project.

  11. Preparation of Adsorbent with Magnesium Sulfate and Straw Pulp Black Liquor and Its Phenol Adsorption Properties

    Institute of Scientific and Technical Information of China (English)

    GUO Lugang; WANG Haizeng

    2009-01-01

    A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were tested through chemical analysis,surface analysis, X-ray diffraction and FT-IR spectroscopy. The effects of various factors, such as dose, adsorption time and adsorption temperature, on phenol adsorption behavior were studied. The results show that the adsorption processes can be fitted to the isotherm Langmuir model very well. It was found that the adsorption process was strongly influenced by temperature and the optimal temperature for phenol removal was 40 ℃. The optimum adsorption time was 10 min, and desorption would happen afterwards. Between the models of Langmuir and Freundlich, the adsorption process of phenol onto magnesia fitted the Langmuir equation better.

  12. Study of the reduction of particle emissions and borate black liquor gasification in bioenergy systems

    Energy Technology Data Exchange (ETDEWEB)

    Leduc, Sylvain

    2004-11-01

    zone of the boiler. The results from the simulations were validated against measurements. The temperature field was well described and the velocity field was predicted with acceptable accuracy. Chemical reactions were not included in these simulations. Turbulence was modelled using the RNG k-{epsilon} model, which is relatively easy to use. This thesis also performs a study on a new model of black liquor gasification with borate autocausticizing, which has the potential to improve the production performance of pulp mills. The earlier model from Jansson did not have the efficiency expected, and was found unacceptable as a means of replacing the lime cycle. The new process has a real advantage compared to earlier borate autocausticizing processes; it can theoretically be led either on a full scale or as a part of the process to an ordinary causticizing and with moderate borate setting. The booster gasifier is studied. The material and energy balance is formulated for a sulphate- recycling block with this process and is compared with the conventional techniques. The results of the usual black liquor gasification were very close to reality and very promising. Regarding the black liquor gasification with borate, lack of data for the orthoborate, like the Gibbs free energy, did not enable good accuracy of the results. The model is so far a good start in black liquor gasification, but it needs to be improved as soon as some new data are available.

  13. Simultaneous measurement of the surface temperature and the release of atomic sodium from a burning black liquor droplet

    Energy Technology Data Exchange (ETDEWEB)

    Saw, Woei L.; Nathan, Graham J. [Centre for Energy Technology, The University of Adelaide, SA 5006 (Australia); School of Mechanical Engineering, The University of Adelaide (Australia); Ashman, Peter J.; Alwahabi, Zeyad T. [Centre for Energy Technology, The University of Adelaide, SA 5006 (Australia); School of Chemical Engineering, The University of Adelaide (Australia); Hupa, Mikko [Process Chemistry Centre, Aabo Akademi, Biskopsgatan 8 FI-20500 Aabo (Finland)

    2010-04-15

    Simultaneous measurement of the concentration of released atomic sodium, swelling, surface and internal temperature of a burning black liquor droplet under a fuel lean and rich condition has been demonstrated. Two-dimensional two-colour optical pyrometry was employed to determine the distribution of surface temperature and swelling of a burning black liquor droplet while planar laser-induced fluorescence (PLIF) was used to assess the temporal release of atomic sodium. The key findings of these studies are: (i) the concentration of atomic sodium released during the drying and devolatilisation stages was found to be correlated with the external surface area; and (ii) the insignificant presence of atomic sodium during the char consumption stage shows that sodium release is suppressed by the lower temperature and by the high CO{sub 2} content in and around the particle. (author)

  14. Mechanism on microwave-assisted acidic solvolysis of black-liquor lignin.

    Science.gov (United States)

    Dong, Chengjian; Feng, Chunguang; Liu, Qian; Shen, Dekui; Xiao, Rui

    2014-06-01

    Microwave-assisted degradation of black-liquor lignin with formic acid was studied, concerning the product yield and distribution of phenolic compounds against reaction temperature (110-180°C) and reaction time (5-90 min). The liquid product consisting of bio-oil 1 and bio-oil 2, achieved the maxima yield of 64.08% at 160°C and 30 min (bio-oil 1: 9.69% and bio-oil 2: 54.39%). The chemical information of bio-oil 1 and bio-oil 2 were respectively identified by means of Gas Chromatography-Mass Spectrometer (GC-MS) and Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), while the solid residue was analyzed by Gel Permeation Chromatography (GPC) and Fourier Transform Infrared Spectroscopy (FTIR). A possible mechanism was proposed for the microwave-assisted acidic solvolysis of lignin, specifying the kinetic relationship among the primary cracking of lignin, repolymerization of the oligomers and formation of solid residue. PMID:24747392

  15. Electrochemical degradation of acidified reed pulp black liquor with three-dimensional electrode reactor

    Institute of Scientific and Technical Information of China (English)

    赵静; 叶晟; 柴立元; 王云燕; 舒余德; 尤翔宇

    2015-01-01

    The electrochemical degradation of reed pulp black liquor containing lignin pretreated by acidification method was investigated using a three-dimensional electrode reactor. Using activated carbon as particle electrode, the effects of pH value, reaction temperature, electrolysis time and current on residual concentration of total organic carbon (TOC) were discussed in detail. The optimal conditions were obtained: pH 2.5, influent flow rate of 200 mL/min, 25 °C, 300 mA and 2 h of electrolysis time, and the removal efficiency of TOC maintains at 35.57 %. The results of the electrochemical method indicate that •OH radicals are produced in activated carbon anode in the electrolysis process and then adsorbed on the activated carbon surface. Microcell consists of •OH radicals and the absorbed lignin. With the microcell reaction, the lignin is degraded, while the anodic polarized curve illustrates that the lignin is obviously oxidized in the anode. The contributions of direct and indirect electrolyses to the TOC removal ratio are about 50%, respectively.

  16. A win-win technique of stabilizing sand dune and purifying paper mill black-liquor

    Institute of Scientific and Technical Information of China (English)

    WANG Hanjie; Penning de Vries FRITS; JIN Yongcan

    2009-01-01

    The principle and technique were reported here to produce lignin-based sand stabilizing material (LSSM) using extracted lignin from black liquor of straw paper mills. Field tests by using LSSM to stabilize and green sand dunes started in 2002. The field experiment was carried out in August 2005 when the newly formed plant community was 3 years old. The results from the comprehensive field experiment demonstrated that unlike polyvinyl acetate or foamed asphalt commonly used for dune stabilization, LSSM was plant-friendly material and could be used in combination with seeding and planting of desert species. By the help of LSSM, the desert species (i.e., Agriophyllum squarrosum (L.) Moq. and Artemisia desertorum Spreng. etc.) could be used to form community in 2-3 yeas and to stabilize sand dune effectively. The newly formed community was sustainable under an extremely dry climate conditions. The organic matter and total nitrogen in the soil increased significantly as the community were formed, while the change in P and K contents of the soil was negligible.

  17. Energy and phosphorus recovery from black water

    NARCIS (Netherlands)

    Graaff, de M.S.; Temmink, B.G.; Zeeman, G.; Buisman, C.J.N.

    2011-01-01

    Source-separated black water (BW) (toilet water) containing 38% of the organic material and 68% of the phosphorus in the total household waste (water) stream including kitchen waste, is a potential source for energy and phosphorus recovery. The energy recovered, in the form of electricity and heat,

  18. Multi-Response Optimization via Desirability Functionfor the Black Liquor DATA

    Directory of Open Access Journals (Sweden)

    Anwar Fitrianto

    2012-07-01

    Full Text Available The experiment that was conducted to examine the advanced oxidation of the black liquor effluent obtained from the pulp and paper industry using the dark Fenton reaction in a lab-scale experiment based on Central Composite Design. The three factors along with their range values in that experiment were temperature (298; 333, K, H2O2 concentration (29.4; 58.8, mM, and Fe(II concentration (0.36; 8.95, mM. The range of the factors were examine at fixed phase pH=3. Three response variables studied in the experiment, namely, COD removal after 90 min(%, UV254 removal after 90 min(aromatic content,%, and UV280 removal after 90 min (lignin content, %. The most widespread application of the RSM is in the situation where input variables potentially influence some quality characteristics of a process. Due to the fact that the experiment has several response variables, we employed a desirability function approach to optimize the responses simultaneously at one best setting of available factors. The resulted simultaneous optimization of an experiment is, in fact, the real situation where the experimenter should deal with since in an experiment, there is certainly a single input setting. After analyzing the data, both separated for each response variable and simultaneous for all response variables provided the same terms (factors which are significantly contribute to the quadratic model (H2O2 and Fe(II concentration. Nevertheles, they produced different factor settings. Through desirability function approach, we found that the best settings are 46.84 mM and 6.771 mM of H2O2 and Fe(II concentration, respectively. Those setting can be obtained at desirability function’s value of 0.782.

  19. 黑液成分分析及溶出木素的测定%Componential Analysis of Black Liquor and Determining of Dissohtion Lignin

    Institute of Scientific and Technical Information of China (English)

    张春敬; 刘玉

    2012-01-01

    The composition of black liquor was analyzed, then dissolved lignin was separated by fractionation with acidulation precipitation, and the UV lignin was quantified by UV analysis. The result showed that UV lignin is more than 90% of the total lignin in the black liquor. In other words, using acidulation precipitation can separate lignin from the black liquor is completely feasible.%对黑液的成分进行分析。利用改进酸析法分级分离析出黑液中的木素,并用紫外法对酸析后黑液中的木素进行定量分析。实验结果表明,酸析木素占黑液中总木素的比例可达90%以上,证明应用此法分离黑液中的木素是可行的。

  20. Integration of the Mini-Sulfide Sulfite Anthraquinone (MSS-AQ) Pulping Process and Black Liquor Gasification in a Pulp Mill

    Energy Technology Data Exchange (ETDEWEB)

    Hasan Jameel, North Carolina State University; Adrianna Kirkman, North Carolina State University; Ravi Chandran,Thermochem Recovery International Brian Turk Research Triangle Institute; Brian Green, Research Triangle Institute

    2010-01-27

    As many of the recovery boilers and other pieces of large capital equipment of U.S. pulp mills are nearing the end of their useful life, the pulp and paper industry will soon need to make long-term investments in new technologies. The ability to install integrated, complete systems that are highly efficient will impact the industry’s energy use for decades to come. Developing a process for these new systems is key to the adoption of state-of-the-art technologies in the Forest Products industry. This project defined an integrated process model that combines mini-sulfide sulfite anthraquinone (MSS-AQ) pulping and black liquor gasification with a proprietary desulfurization process developed by the Research Triangle Institute. Black liquor gasification is an emerging technology that enables the use of MSS-AQ pulping, which results in higher yield, lower bleaching cost, lower sulfur emissions, and the elimination of causticization requirements. The recently developed gas cleanup/absorber technology can clean the product gas to a state suitable for use in a gas turbine and also regenerate the pulping chemicals needed to for the MSS-AQ pulping process. The combination of three advanced technologies into an integrated design will enable the pulping industry to achieve a new level of efficiency, environmental performance, and cost savings. Because the three technologies are complimentary, their adoption as a streamlined package will ensure their ability to deliver maximum energy and cost savings benefits. The process models developed by this project will enable the successful integration of new technologies into the next generation of chemical pulping mills. When compared to the Kraft reference pulp, the MSS-AQ procedures produced pulps with a 10-15 % yield benefit and the ISO brightness was 1.5-2 times greater. The pulp refined little easier and had a slightly lower apparent sheet density (In both the cases). At similar levels of tear index the MSS-AQ pulps also

  1. Socioeconomic Factors Affecting Local Support for Black Bear Recovery Strategies

    Science.gov (United States)

    Morzillo, Anita T.; Mertig, Angela G.; Hollister, Jeffrey W.; Garner, Nathan; Liu, Jianguo

    2010-06-01

    There is global interest in recovering locally extirpated carnivore species. Successful efforts to recover Louisiana black bear in Louisiana have prompted interest in recovery throughout the species’ historical range. We evaluated support for three potential black bear recovery strategies prior to public release of a black bear conservation and management plan for eastern Texas, United States. Data were collected from 1,006 residents living in proximity to potential recovery locations, particularly Big Thicket National Preserve. In addition to traditional logistic regression analysis, we used conditional probability analysis to statistically and visually evaluate probabilities of public support for potential black bear recovery strategies based on socioeconomic characteristics. Allowing black bears to repopulate the region on their own (i.e., without active reintroduction) was the recovery strategy with the greatest probability of acceptance. Recovery strategy acceptance was influenced by many socioeconomic factors. Older and long-time local residents were most likely to want to exclude black bears from the area. Concern about the problems that black bears may cause was the only variable significantly related to support or non-support across all strategies. Lack of personal knowledge about black bears was the most frequent reason for uncertainty about preferred strategy. In order to reduce local uncertainty about possible recovery strategies, we suggest that wildlife managers focus outreach efforts on providing local residents with general information about black bears, as well as information pertinent to minimizing the potential for human-black bear conflict.

  2. Increasing the lignin yield of the Alkaline Polyol Pulping process by treating black liquor with laccases of Myceliophthora thermophila.

    Science.gov (United States)

    Engel, Norman; Hundt, Martin; Schapals, Tino

    2016-03-01

    The Alkaline Polyol Pulping process separates cellulose from lignocellulosic biomass by dissolving lignin to a great extent. Due to the pulping conditions the dissolved lignin depolymerises and only 75% can be precipitated. To increase this amount, a 24 h reaction of laccases of Myceliophthora thermophila with lignin dissolved in black liquor of the AlkaPolP process was investigated. The influence of pH, temperature, enzyme concentration and partial oxygen pressure was examined in a batch stirred tank reactor using a Box-Behnken factorial design. Due to the enzymatic reaction the lignin polymerises which results in an enhanced lignin precipitation. The addition of a mediator improves the polymerisation but decreases the amount of precipitable lignin. The influence of the parameters on precipitation yield and molecular mass can sufficiently be described with a second-order model and optimum conditions can be assessed. FT-IR spectra of the obtained lignins revealed that its typical phenolic structure is preserved. PMID:26722808

  3. Sulphur distribution during air gasification of kraft black liquor solids in a fluidized bed of TiO{sub 2} particles

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, L. [BC Research Inc., Vancouver, BC (Canada); Van Heiningen, A.R.P. [Main Univ., Orono, ME (United States)

    1999-06-01

    A study was conducted to determine if kraft black liquor (KBL) gasification is a viable alternative for conventional kraft recovery, and to evaluate the sulphur distribution during gasification of KBL in the presence of TiO{sub 2}. KBL gasification can be combined with direct causticization by TiO{sub 2} to prevent smelt formation, minimize sodium emission and to eliminate the lime causticizing cycle. However, the presence of TiO{sub 2} should theoretically lead to the complete volatilization of the sulphur in KBL mostly as H{sub 2}S and Na{sub 2}S. Experiments were conducted at 700 to 900 degrees C in a pilot fluidized bed system. The bed residual solids were analyzed for sulphite, sulphate, thiosulphate and sulphide using various techniques. Results showed that Na{sub 2}S was not found in the KBL solids but Na{sub 2}S{sub 2}O{sub 3} content was high probably because of oxidation of NA{sub 2}S during drying. It was suggested that thermal cracking of CH{sub 3}SH and (CH{sub 3}) {sub 2}S is the major cause for H{sub 2}S generation. 18 refs., 3 tabs., 6 figs.

  4. CO{sub 2} emission balances for different black liquor gasification biorefinery concepts for production of electricity or second-generation liquid biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Pettersson, Karin; Harvey, Simon [Department of Energy and Environment/Heat and Power Technology, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden)

    2010-02-15

    Black liquor gasification (BLG) is currently being developed as an alternative technology for energy and chemical recovery at chemical pulp mills. This study examines how different assumptions regarding systems surrounding the pulp mill affect the CO{sub 2} emission balances for different BLG concepts. The syngas from the gasification process can be used for different applications; this study considers production of renewable motor fuels and electricity generation. Both a market pulp mill and an integrated pulp and paper mill are considered as host mill for the BLG plant. Furthermore, the consequences of limited availability of biomass are shown, i.e., increasing the use of biomass in a mill is not necessarily CO{sub 2}-neutral. The results show that the potential to reduce CO{sub 2} emissions by introducing BLG is generally much higher for a market pulp mill than for an integrated pulp and paper mill. Electricity generation from the syngas is favoured when assuming high grid electricity CO{sub 2} emissions whereas motor fuel production is favoured when assuming low grid electricity CO{sub 2} emissions. When considering the consequences of limited availability of biomass, the CO{sub 2} emission balances are strongly affected, in some cases changing the results from a decrease to an increase of the CO{sub 2} emissions. (author)

  5. Catalytic oxidative treatment of diluted black liquor at mild conditions using copper oxide/cerium oxide catalyst.

    Science.gov (United States)

    Garg, Anurag; Mishra, Indra M; Chand, Shri

    2008-02-01

    Wet-air oxidation of diluted black liquor (chemical oxygen demand [COD] approximately 3250 to 14 500 mg/L) was performed at mild operating conditions (temperature = 388 to 423 K and total pressure = 0.6 MPa) in the presence of heterogeneous 60% copper oxide (CuO)/ 40% cerium oxide (CeO2) catalyst. Maximum COD reduction of 77.3% was obtained at 423 K at pH 3.0, which was marginally higher than that obtained at 413 K temperature (77.1%). In the acidic environment (pH < or = 3), most of the COD was removed in the form of settleable solids during the transient heating of the wastewater from room temperature to the desired one. The solid residue obtained after the reaction has a heating value of 20.1 MJ/kg, which is comparable with that of Indian coal. Thermal degradation kinetic determination suggested that thermal characteristics of the solid residue are well represented by a power law model with Agarwal and Sivasubramanian approximation (Safi et al., 2004). PMID:18330223

  6. Pyrolysis and auto-gasification of black liquor in presence of ZnO: An integrated process for Zn/ZnO nanostructure production and bioenergy generation

    International Nuclear Information System (INIS)

    This study presents a new process for valorisation of black liquor into gases that are used to reduce ZnO and promote zinc nanosheet synthesis, besides energy generation. During the black liquor pyrolysis and auto-gasification, gases evolve, especially carbon monoxide, and promote ZnO reduction with Zn(v) release. The metal is condensed yielding zinc nanosheets, with partial surface re-oxidation in presence of carbon dioxide. The process was investigated at the micro scale using thermal analyses (TG/DTG/DTA) and the gases evolved were analysed by FTIR spectroscopy (TG/FTIR). The process was also studied in laboratory scale using a tubular electric furnace. The black liquor/ZnO mixture was placed at the quartz tube and the sample was heated to 900 °C at 10 °C/min, and the temperature was held at 900 °C for 1 h. The nanostructures growth was catalyst-free, without pressure reduction or a template, at temperatures lower than those required in the classical carbothermal reduction of ZnO with fossil carbon. The nanostructures were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and infrared spectroscopy (FTIR). One mechanism was presented in an attempt to explain the synthesis of Zn/ZnO nanosheets that are crystalline. This green and innovative process has potential use at the industry due to its operational conditions, low costs and technological importance of Zn and ZnO nanostructures. -- Graphical abstract: Display Omitted Highlights: ► Black liquor and ZnO mixture were submitted to a heat treatment until 900 °C. ► The black liquor suffered pyrolysis and auto-gasification. ► ZnO is reduced by CO yielding Znv, that is condensed generating Zn/ZnO nanosheets. ► The nanostructures are characterized and a mechanism of reactions is presented. ► The new process can produce energy and nanostructures in large scale.

  7. Laccase-initiated cross-linking of lignocellulose fibres using a ultra-filtered lignin isolated from kraft black liquor.

    Science.gov (United States)

    Elegir, G; Bussini, D; Antonsson, S; Lindström, M E; Zoia, L

    2007-12-01

    In this work, the effect of Trametes pubescens laccase (TpL) used in combination with a low-molecular-weight ultra-filtered lignin (UFL) to improve mechanical properties of kraft liner pulp and chemi-thermo-mechanical pulp was studied. UFL was isolated by ultra-filtration from the kraft cooking black liquor obtained from softwood pulping. This by-product from the pulp industry contains an oligomeric lignin with almost twice the amount of free phenolic moieties than residual kraft pulp lignin. The reactivity of TpL on UFL and kraft pulp was studied by nuclear magnetic resonance spectroscopy and size exclusion chromatography. Laccase was shown to polymerise UFL and residual kraft pulp lignin in the fibres, seen by the increase in their average molecular weight and in the case of UFL as a decrease in the amount of phenolic hydroxyls. The laccase initiated cross-linking of lignin, mediated by UFL, which gives rise to more than a twofold increase in wet strength of kraft liner pulp handsheets without loosing other critical mechanical properties. Hence, this could be an interesting path to decrease mechano-sorptive creep that has been reported to lessen in extent as wet strength is given to papers. The laccase/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) mediator system showed a greater increase in wet tensile strength of the resulting pulp sheets than the laccase/UFL system. However, other mechanical properties such as dry tensile strength, compression strength and Scott Bond internal strength were negatively affected by the laccase/ABTS system. PMID:17955195

  8. Uranium extraction from ores with lemon juice; II,b. uranium recovery from pregnant lemon juice liquors obtained by attacking phosphate ore and suggested flowsheet

    International Nuclear Information System (INIS)

    In order to recover uranium from the pregnant liquors obtained by attacking Safaga phosphate and Qatrani phosphatic sandstone ore materials with lemon juice, methylation for acidic fraction-salt separation has been carried out. Afterwards, separation of uranium from the associated calcium (mainly present in lemon juice liquors as citrate) has been performed by making-use of the wide difference in their water solubility. The solutions containing the separated uranium were then subjected to evaporation till dryness whereby the precipitated uranyl citrate was calcined at 500 degree C to obtain the yellow orange oxide powder (UO3). On the basis of one ton ore treatment, a flowsheet for uranium recovery from the two ore materials has been suggested

  9. A review on methods of recovery of acid(s) from spent pickle liquor of steel industry.

    Science.gov (United States)

    Ghare, N Y; Wani, K S; Patil, V S

    2013-04-01

    Pickling is the process of removal of oxide layer and rust formed on metal surface. It also removes sand and corrosion products from the surface of metal. Acids such as sulfuric acid, hydrochloric acid are used for pickling. Hydrofluoric acid-Nitric acid mixture is used for stainless steel pickling. Pickling solutions are spent when acid concentration in pickling solutions decreases by 75-85%, which also has metal content up to 150-250 g/ dm3. Spent pickling liquor (SPL) should be dumped because the efficiency of pickling decreases with increasing content of dissolved metal in the bath. The SPL content depends on the plant of origin and the pickling method applied there. SPL from steel pickling in hot-dip galvanizing plants contains zinc(II), iron, traces of lead, chromium. and other heavy metals (max. 500 mg/dm3) and hydrochloric acid. Zinc(II) passes tothe spent solution after dissolution of this metal from zinc(II)-covered racks, chains and baskets used for transportation of galvanized elements. Unevenly covered zinc layers are usually removed in another pickling bath. Due to this, zinc(II) concentration increases even up to 110 g/dm3, while iron content may reach or exceed even 80 g/dm3 in the same solution. This review presents an overview on different aspects of generation and treatment of SPL with recourse to recovery of acid for recycling. Different processes are described in this review and higher weightage is given to membrane processes. PMID:25508333

  10. Interior of black holes and information recovery

    Science.gov (United States)

    Kawai, Hikaru; Yokokura, Yuki

    2016-02-01

    We analyze time evolution of a spherically symmetric collapsing matter from a point of view that black holes evaporate by nature. We first consider a spherical thin shell that falls in the metric of an evaporating Schwarzschild black hole of which the radius a (t ) decreases in time. The important point is that the shell can never reach a (t ) but it approaches a (t )-a (t )d/a (t ) d t . This situation holds at any radius because the motion of a shell in a spherically symmetric system is not affected by the outside. In this way, we find that the collapsing matter evaporates without forming a horizon. Nevertheless, a Hawking-like radiation is created in the metric, and the object looks the same as a conventional black hole from the outside. We then discuss how the information of the matter is recovered. We also consider a black hole that is adiabatically grown in the heat bath and obtain the interior metric. We show that it is the self-consistent solution of Gμ ν=8 π G ⟨Tμ ν⟩ and that the four-dimensional Weyl anomaly induces the radiation and a strong angular pressure. Finally, we analyze the internal structures of the charged and the slowly rotating black holes.

  11. Perspectives for the electricity surplus generation at the paper and cellulose segment through the gasification of black liquor; Perspectivas para a geracao de excedentes de eletricidade no segmento de papel e celulose atraves da gaseificacao de lixivia

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez, Silvia Maria Stortini Gonzalez [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil). Escola de Engenharia]. E-mail: velazquez@mackenzie.com.br; Coelho, Suani Teixeira [CENBIO - Centro Nacional de Referencia em Biomassa, Sao Paulo, Sp (Brazil)]. E-mail: suani@iee.usp.br

    2006-07-01

    industries, that currently, already demonstrate little interest in generating and/or to commercialize excesses, the problem is more complex. Beyond the technological impediment, therefore the Tomlinson recovery boilers limit the scale of the process (besides being in the end of its useful life in many units) and of the development training period of the black liquor gasification (still not available commercially), it has the raised cost of this technology (new one). (author)'.

  12. 麦草浆黑液燃烧法除硅研究%Remove silicon through black liquor combustion for wheat straw pulping

    Institute of Scientific and Technical Information of China (English)

    徐永建; 孙浩; 张鼎军; 田勇

    2015-01-01

    研究了硫酸铝对麦草浆浓黑液理化性能及除硅效果的影响.实验结果表明,铝盐有利于提高浓黑液膨胀率,在添加量为3%时达到了最大值64.19%;流变仪检测表明,在高温下铝盐添加量对浓黑液的黏度几乎没有影响,可在110℃输送浓黑液;黑液燃烧法结果表明,铝盐具有一定的除硅作用,硫酸铝的除硅效果最高可达53.02%;SEM‐EDAX检测结果表明,铝离子能和硅形成不溶于水的沉淀物.上述结果表明:硫酸铝具有一定的除硅效果,当其添加量为3%时除硅效果最好.%Effect of physical and chemical properties and desilication rate of aluminium sul‐phate were studied on thick black liquor of grows wheat straw .Results showed that expan‐sion rate was enhanced with an increase in aluminum salt which reached the maximum desili‐cation rate of 64 .19% in addition amount of 3% .Rheometer showed aluminum salt would have little impact on the viscosity of thick black liquor at a high temperature ,so it was a bet‐ter selection that thick black liquor could be conveyed at 110 ℃ .It was studied the effect of adding aluminium salt on silicon removal rate during black liquor combusting .The experi‐mental results showed that aluminium sulphate had the function of desilication ,while the de‐silication rate of aluminum sulphate could reach 53 .02% .SEM‐EDX illustrated the alumi‐num and silicon ions was formed into insoluble precipitate .It was a optimum way to choose 3% of aluminium sulphate as the desilication agent under comprehensive consideration .

  13. Comparison of two continuous fungal bioreactors for posttreatment of anaerobically pretreated weak black liquor from kraft pulp mills.

    Science.gov (United States)

    Ortega-Clemente, Alfredo; Marín-Mezo, G; Ponce-Noyola, M T; Montes-Horcasitas, M C; Caffarel-Méndez, S; Barrera-Cortés, Josefina; Poggi-Varaldo, Héctor M

    2007-03-01

    The purpose of this work was to evaluate and compare two continuous systems of posttreatment of anaerobically pretreated weak black liquor (WBL). The first system consisted of a packed bed reactor (PBR) with Trametes versicolor (Tv) immobilized on wood cubes of holm oak (biocubes). The second system was a fluidized bed reactor (FBR) with Lentinus edodes (Le) immobilized on wood cubes of holm oak. The reactors operated for 65 days at a hydraulic retention time (HRT) of 5 days, at 28 degrees C, with continuous aeration. Response variables monitored were conventional and specific, unit, net removal efficiency (eta and eta(sun), respectively) of chemical oxygen demand (COD), color, and ligninoids, and enzymatic activities of manganese peroxidase (MnP), lignin peroxidase (LiP), laccase (Lac) and proteases. The PBR showed an average color eta superior to that of the FBR (52.42 +/- 21.78% and 25.34 +/- 14.38% for PBR and FBR, respectively); removals of COD and ligninoids presented a similar pattern to that of color. Lac activity was significantly larger in PBR than in FBR. Activity of MnP in PBR was higher than that of the FBR (0.004 and 0.002 U MnP/mL, respectively). This difference could be ascribed to the different fungi present in each bioreactor. LiP activity was very low in both reactors. Average value of proteases was almost double in the FBR as compared with PBR (0.472 and 0.209 U Proteases/mL, respectively). During the last 2 weeks of operation, biocubes in the FBR experienced a significant loss of the attached Le biomass, probably by attrition. This and higher protease activity in the FBR could explain the lower pollutant removals achieved in the FBR. Overall, PBR with immobilized Tv showed a better performance than the FBR with Le for the posttreatment of the recalcitrant anaerobic effluent. Extended and sustained pollutant removal (65 days) was achieved in the PBR, although more research is needed to evaluate bioreactor performance at shorter hydraulic

  14. Interior of Black Holes and Information Recovery

    CERN Document Server

    Kawai, Hikaru

    2015-01-01

    We analyze time evolution of a collapsing matter from a point of view that black holes evaporate by nature. We first consider a spherical thin shell that falls in the metric of an evaporating Schwarzschild black hole whose radius $a(t)$ decreases as $\\frac{da(t)}{dt}=-\\frac{2\\sigma(a(t))}{a(t)^2}$. The shell can never reach $a(t)$, but it approaches $a(t)+\\frac{2\\sigma(a(t))}{a(t)}$ in the time scale $\\sim a(t)$. Then the radiation from the hole is extremely weakened because of the large redshift caused by the shell. This time, however, the shell itself starts to radiate and exhausts energy. After that, the hole starts to radiate again. We can repeat this argument recursively because the motion of a shell in a spherically symmetric system is independent of the outside. In this way we can analyze a spherically symmetric collapsing matter with a general continuous distribution, and find that it evaporates without forming a trapped region. If the theory has considerably more species of matter fields, the trans-P...

  15. Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment; Task 2: Gas Cleanup Design and Cost Estimates -- Black Liquor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Nexant Inc.

    2006-05-01

    As part of Task 2, Gas Cleanup and Cost Estimates, Nexant investigated the appropriate process scheme for removal of acid gases from black liquor-derived syngas for use in both power and liquid fuels synthesis. Two 3,200 metric tonne per day gasification schemes, both low-temperature/low-pressure (1100 deg F, 40 psi) and high-temperature/high-pressure (1800 deg F, 500 psi) were used for syngas production. Initial syngas conditions from each of the gasifiers was provided to the team by the National Renewable Energy Laboratory and Princeton University. Nexant was the prime contractor and principal investigator during this task; technical assistance was provided by both GTI and Emery Energy.

  16. 催化湿式氧化预处理造纸黑液%Pretreatment of Black Liquor by Catalytic Wet Air Oxidation

    Institute of Scientific and Technical Information of China (English)

    董振海; 李利敏; 闫海生; 于姗姗; 李秀珍; 毕延文

    2011-01-01

    采用连续式固定床反应器,利用自制稀土类复合金属氧化物催化剂对草浆造纸黑液进行了催化湿式氧化(CWAO)预处理研究.通过正交实验确定了最佳工艺条件为:进水COD 40 800 mg/L,空速0.8h-1,反应温度260℃,反应压力6.5 MPa.在此最佳条件下进行实验,COD去除率达90%.经CWAO工艺处理后,草浆造纸黑液的可生化性显著提高,BOD5/COD由0.11提高至0.62.在1 000 h CWAO连续实验中,自制稀土类复合金属氧化物催化剂显示出较高催化活性和较好的稳定性.%The black liquor from straw pulp paper-making was pretreated by catalytic wet air oxidation (CWAO) in the continuous fixed bed reactor with self-made rare earth oxide catalyst. The optimum process conditions determined by the orthogonal tests are as follows: influent COD 40 800 mg/L,space velocity 0. 8 h-1 .reaction temperature 260℃, reaction pressure 6. 5 Mpa. Under these conditions, the COD removal rate is 90%. The biodegradability of the treated black liquor is significantly improved with BOD5/COD increased from 0. 11 to 0. 62. During 1 000 h of the CWAO continuous experiment, the catalytic activity and stability of the self-made rare earth oxide catalyst are good.

  17. Determinations of Se in white liquor and leach liquor by ICP-AES%电感耦合等离子发射光谱(ICP-AES)测定白酒及浸提液中Se

    Institute of Scientific and Technical Information of China (English)

    高薇; 王莹; 张鲜; 张鹤小

    2012-01-01

    对白酒及浸提液进行分析,为人们饮用芝麻酒提供科学依据。微波消解方法消化样品,白酒浸泡黑芝麻,浸提其中的Se元素,应用ICP-AES法测定浸提液中Se元素的含量。黑芝麻中Se的回收率为97.5%,相对标准偏差为1.45%。黑芝麻中丰富的Se元素,经过白酒的浸泡,使白酒中Se元素含量更高,与普通的白酒相比,更具有营养价值。黑芝麻酒是一种简单自制的保健酒,其药用及保健价值应引起人们的广泛关注。%Analysis white liquor and leach liquor, for people drank sesame liquor provide the scientific basis. The samples were digested in the microwave systerm, soak black sesame in white liquor, recover Se from it. ICP-AES was applied to the determination of the content of Se in leach liquor. The recovery rate of the method is 97.5% and relative standard deviation is 1.45%. We soaked the black sesame which have aburdant content of element Se in the liquor in order to increase the content of element Se. And this kind of liquor has more nutritional value compared to the ordinary liquor. Black sesame liquor is one kind of simple homemade health wine.its value of medical and health should be aroused wide attention.

  18. Preparation and research of black liquor modified amino sulfonate superplasticizer%黑液改性氨基磺酸盐高效减水剂的制备与研究

    Institute of Scientific and Technical Information of China (English)

    赖广兴; 方云辉; 郑飞龙; 林添兴

    2013-01-01

    通过一系列的单因素试验,研究了氨基磺酸盐高效减水剂合成的最佳参数,并在最佳合成参数基础上添加黑液进行改性,合成了一系列不同黑液掺量的改性氨基磺酸盐高效减水剂.采用红外光谱对黑液改性产物的分子结构进行了表征,并对黑液改性产物进行净浆流动度、砂浆流动度、泌水率、混凝土坍落度等测试,结果显示,黑液添加量为18%的改性氨基磺酸盐高效减水剂性价比最高、综合性能最佳.%The best synthesized parameters of the amino sulfonate superplasticizer was studied by a series of single-factor test and added the black liquor on the basis of the best synthesis parameters to modify and a series of the amino sulfonate superplas ticizer with the different dosage of black liquor were synthesized. The molecular structure of the black liquor modified products were characterized by FT-IR and were tested by paste fluidity,mortar fluidity,bleeding rate and concrete slump. The results show that,the amino sulfonate superplasticizer with the 18% amount of black liquor has the highest cost performance and the best com prehensive performance.

  19. Review of Treatment and Recovery Technologies of Waste Stainless Steel Pickling Liquor%不锈钢酸洗废液的处理与回收技术综述

    Institute of Scientific and Technical Information of China (English)

    李小明; 李文锋; 王尚杰; 史雷刚

    2012-01-01

    介绍了不锈钢酸洗废液的来源、组成和危害.综述了酸洗废液中酸及金属的回收方法、原理及优缺点,着重介绍了酸的扩散渗析、双极膜电渗析、蒸酸和焙烧回收技术,以及金属盐的中和沉淀、析晶、离子交换树脂和萃取回收技术.指出将多种技术进行组合,可实现酸洗废液中金属盐和酸的双重回收.%The origins, components and hazards of waste stainless steel pickling liquor are introduced. The methods, principles, advantages and disadvantages of acid and metal recovery from waste stainless steel pickling liquor are reviewed. Some technologies are emphatically introduced, such as: diffusion dialysis, bipolar membrane electrodialysis, evaporation and spray roasting for acid recovery; neutralization and precipitation, crystallization, ion exchange and solvent extraction for metal recovery. It is pointed out that metal salt and acid recovery from the waste pickling liquor may be realized with the combination of multiple technologies.

  20. Preparation of Concrete Water-reducer by Oxidation and Sulfomethylation of Bamboo Pulping Black Liquor%竹浆黑液氧化-磺甲基化制备混凝土减水剂研究

    Institute of Scientific and Technical Information of China (English)

    何贵萍; 吕思宁; 刘一山; 周建; 何强

    2011-01-01

    对碱法竹浆黑液进行氧化-磺甲基化改性,制备了可用作混凝士减水剂的磺化木素,并研究了该产品的水溶性和表面活性,探讨了其作为减水剂在水泥浆中的应用性能.结果表明,氧化-磺甲基化处理能有效改善碱法竹浆黑液中木素的水溶性,提高其表面活性.%Lignosulfonate was prepared as water-reducer via oxidation and sulfomethylation of bamboo alkaline-pulping black liquor. Results indicated that the water-solubility and surfactivity of lignin in black liquor can be effectively improved through the modification. The prepared lignosulfonate can be employed as a cost-effectively water-reducer in concrete industry, since it can reduce cement slurry viscosity so as to increase the fluidity by means of dispersing cement slurry floc and releasing the bound water. This work shows great significance in pollution prevention and the reuse of black liquor.

  1. Comparison of the Psychological Recovery of Black and White Victims of Rape.

    Science.gov (United States)

    Morelli, Patricia H.

    Knowledge of individual differences of victim responses to and recovery from rape is necessary in order to provide for each victim's individual needs. Black women may be exposed to more violence in their culture and may be treated differently than white women. These differences may lead to different recovery patterns between black and white rape…

  2. Improved Energy Recovery by Anaerobic Grey Water Sludge Treatment with Black Water

    NARCIS (Netherlands)

    Tervahauta, T.H.; Bryant, I.M.; Hernandez Leal, L.; Buisman, C.J.N.; Zeeman, G.

    2014-01-01

    This study presents the potential of combining anaerobic grey water sludge treatment with black water in an up-flow anaerobic sludge blanket (UASB) reactor to improve energy recovery within source-separated sanitation concepts. Black water and the mixture of black water and grey water sludge were co

  3. Feasibility of recovery boiler in paper and pulp industry

    International Nuclear Information System (INIS)

    in this paper feasibility of recovery boiler in terms of economics and environmental impacts in studied. Recovery boilers are employed in the pulp and paper industry where the cooking agent is recovered by burning black liquor. Cooking agent is exhausted due to the absorption of lignin (a burnable component) in cooking agent in the process of straw cooking. The process of recovery boiler is to remove lignin by combustion from black liquor, and heat is produced during the combustion of lignin which is used to produce steam. Recovery boiler is economical as it is recovering valuable chemicals and steam is produced as a byproduct. Steam from recovery boiler is also used for concentrating weak black liquor to concentrated black liquor recovering 50% of the utility water being used at the plant. The regenerated water in the form of foul condensate is reused in the process. The recovery of hazardous chemicals also reduces load of environmental pollution. Which otherwise can pollute the water reservoirs, and regeneration of water makes it environmentally friendly plant. Construction and challenges in operation of recovery boiler such as smelt-water explosion are also discussed in this paper. (author)

  4. Black Liquor Treatment Project of Guizhou Pulp and Paper Making Factory%对贵州制浆造纸厂“黑液”治理方案的建议

    Institute of Scientific and Technical Information of China (English)

    宁媛; 李皖; 曾祥钦

    2001-01-01

    According to the local conditions and the comparison between different proposals,the reclaiming of rough lignin by acid settlement and the reuse of processed lignin are adopted as the most economically effcient project to treat the black liquor pollution.A primary estimate shows that a recovery of 1000 kg of rough lignin will bring 100 renminbi yuan of net income to the enterprise,not including the economic benefits from the usage of the processed lignin.The relevant technology is based on the production and experiments,so it is completely feasible.%从贵州省情出发,通过方案比较,采取酸沉析回收粗木素治理黑液、木素改性再利用方案,黑液的污染将得到有效治理,而且还将获得新的经济效益。初步估算:每回收1吨粗木素可净增效益100元,粗木素改性利用后还可以产生新的经济效益,这对促进地方经济持续发展和社会稳定都很有意义。方案中的有关技术都有生产和生产性中试基础,方案具备可行性。

  5. Trace recovery of uranium and rare earth contained in phosphates by liquid-liquid extraction in sulfuric attack liquor

    International Nuclear Information System (INIS)

    Uranium and rare earths can be recovered in sedimentary phosphates during the wet processing of the ore by sulfuric acid giving raw phosphoric acid at 30 per cent of P2O5. Practically all the uranium contained and only part of rare earths are put into solution in this treatment. Separation of these elements in the phosphoric solution is obtained by liquid-liquid extraction with alkylphosphoric acids and especially with their mono and di esters. Partition isotherms are determined and counter-current tests are effected. Uranium and rare earths reextraction from these solvents can be simultaneous or separate with aqueous solutions alkaline or containing HF or by antisynergism. Pros and cons of each reextraction process are discussed. In conclusion HDEHP or OPPA are recommended because of availability, stability and hydrodynamic, OPPA less selective with rare earths allows the recovery with uranium of ceric earths, yttrium and yttric earths

  6. Improved Energy Recovery by Anaerobic Grey Water Sludge Treatment with Black Water

    Directory of Open Access Journals (Sweden)

    Taina Tervahauta

    2014-08-01

    Full Text Available This study presents the potential of combining anaerobic grey water sludge treatment with black water in an up-flow anaerobic sludge blanket (UASB reactor to improve energy recovery within source-separated sanitation concepts. Black water and the mixture of black water and grey water sludge were compared in terms of biochemical methane potential (BMP, UASB reactor performance, chemical oxygen demand (COD mass balance and methanization. Grey water sludge treatment with black water increased the energy recovery by 23% in the UASB reactor compared to black water treatment. The increase in the energy recovery can cover the increased heat demand of the UASB reactor and the electricity demand of the grey water bioflocculation system with a surplus of 0.7 kWh/cap/y electricity and 14 MJ/cap/y heat. However, grey water sludge introduced more heavy metals in the excess sludge of the UASB reactor and might therefore hinder its soil application.

  7. 造纸黑液中碱木素的提取及其在石化工业中的应用%The application of alkali lignin from black liquor in petroleum industry

    Institute of Scientific and Technical Information of China (English)

    李立波; 赵长征

    2012-01-01

    主要介绍了碱木素的提取,碱木素的结构特性和反应性能。详细阐述了碱木素在石化工业中的应用及其它应用前景。%The application of alkali lignin from black liquor in petroleum industry was summarized. The extraction procedure, structure characteristics and reaction performance forward alkali lignins were introduced. The use of alkali lignin in petroleum industry was elaborated in detail. Going forward, the alkali lignin will be used in many trade.

  8. Synthesis and characterization of high photocatalytic activity and stable Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers for photocatalytic degradation of black liquor

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Li, E-mail: 50647698@qq.com; Long, Qiyi; Yin, Chao

    2014-11-15

    Highlights: • Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers were prepared via in situ Ag{sub 3}PO{sub 4} particles onto the surface of TiO{sub 2} fiber. • Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers have stronger catalytic activity and excellent chemical stability. • Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers act as an efficient catalyst for the photocatalytic degradation of black liquor. - Abstract: The TiO{sub 2} fiber was prepared by using cotton fiber as a template, and then Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers were synthesized via in situ Ag{sub 3}PO{sub 4} particles onto the surface of TiO{sub 2} fiber. Their structure and physical properties were characterized by means of scanning electron microscopy (SEM), specific surface analyzer, X-ray diffraction (XRD), UV–vis absorption spectra and photoluminescence spectra (PL). SEM analysis indicated that the well-defined surface morphology of natural cotton fiber was mostly preserved in TiO{sub 2} and Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers. Compared with TiO{sub 2} fiber, the absorbance wavelengths of Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers were apparently red shifted and the PL intensities revealed a significant decrease. By using the photocatalytic degradation of black liquor as a model reaction, the visible light and ultraviolet light catalytic efficiencies of TiO{sub 2}, Ag{sub 3}PO{sub 4} and Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers were evaluated. The reaction results showed that Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers had stronger photocatalytic activity and excellent chemical stability in repeated and long-term applications. Therefore, the prepared Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers could act as an efficient catalyst for the photocatalytic degradation of black liquor, which suggested their promising applications. It was proposed that the • OH radicals played the leading role in the photocatalytic degradation of the black liquor by Ag{sub 3}PO{sub 4}/TiO{sub 2} fibers system.

  9. Calcium phosphate granulation in anaerobic treatment of black water: a new approach to phosphorus recovery

    NARCIS (Netherlands)

    Tervahauta, T.H.; Weijden, van der R.D.; Flemming, R.L.; Hernández, L.; Zeeman, G.; Buisman, C.J.N.

    2014-01-01

    Recovery of phosphorus from wastewater as calcium phosphate could diminish the need for mining of scarce phosphate rock resources. This study introduces a novel approach to phosphorus recovery by precipitation of calcium phosphate granules in anaerobic treatment of black water. The granules formed i

  10. EFFECTS OF A COMPOUND FERTILIZER OF ORGANIC NPK MADE OF CONCRETIONS OF BLACK-LIQUOR IN PAPER-MAKING ON PEANUT%造纸黑液固化物有机NPK对花生的效应研究

    Institute of Scientific and Technical Information of China (English)

    汪怀建; 周跃龙; 罗运阔; 李琳

    2001-01-01

    The concretions of black liquor, a waste produced in paper-making indu stry, was used as a compound NPK fertilizer and applied to peanut plants with th e compound fertilizers “Shidazhuang” as the control. The black-liquor based fe rt ilizer increased the branch, fruit and plump fruit number per plant and extended flowering period, thus giving 5.6% and 16.4% higher yield than Shidazhuang No.1 and No.2, respectively. The new compound fertilizer also helped improve the qua lity of peanut fruit, increased the total N content in the peanut field and enha nced its fertility.%研究了造纸黑液固化物有机NPK复合肥对花生产量、品质及土壤的影响,结果与“施大壮”复混肥相比,造纸黑液固化物有机NPK复合肥能促进花生分枝多、延长开花期、果数多、饱果数多,因而产量比“施大壮”复混肥1号和2号分别增产5.6%和16.4%。该肥对提高花生品质有一定效应。且该肥增加花生地中土壤的有机质和全氮含量,从而提高土壤肥力。

  11. A combined process of activated carbon adsorption, ion exchange resin treatment and membrane concentration for recovery of dissolved organics in pre-hydrolysis liquor of the kraft-based dissolving pulp production process.

    Science.gov (United States)

    Shen, Jing; Kaur, Ishneet; Baktash, Mir Mojtaba; He, Zhibin; Ni, Yonghao

    2013-01-01

    To recover dissolved organics in pre-hydrolysis liquor (PHL) of the kraft-based dissolving pulp production process, a new combined process concept of sequential steps of activated carbon adsorption, ion exchange resin treatment, and membrane concentration, was proposed. The removal of lignin in the PHL was achieved in the activated carbon adsorption step, which also facilitates the subsequent operations, such as the membrane filtration and ion exchange resin treatment. The ion exchange resin treatment resulted in the removal/concentration of acetic acid, which opens the door for acetic acid recovery. The membrane filtration is to recover/concentrate the dissolved sugars. The combined process resulted in the production of PHL-based concentrate with relatively high concentration of hemicellulosic sugars, i.e., 22.13%.

  12. Chemical treatment of liquors

    International Nuclear Information System (INIS)

    A liquor, which may contain heavy metal species, e.g. U or Pu, is passed along a pipeline provided with a cascade of fluidic mixing devices for adding a reagent or reagents. Pipeline sections are disposed downstream of mixing devices dimensioned so that the liquor and reagent(s) are afforded a residence time for reaction as they flow through it. The mixed liquor/reagent(s) are then fed into a settling vessel from which part of the contents is fed to a centrifugal separator to effect liquid/solid separation. A proportion of the solid separated is recycled back to the cascaded mixing pipeline to provide nuclei to enhance precipitation and/or increase concentration of a constituent, such as a floc-forming agent, used in the treatment of the liquor. (author)

  13. Sacrificial adsorbate for surfactants utilized in chemical floods of enhanced oil recovery operations

    Science.gov (United States)

    Johnson, Jr., James S.; Westmoreland, Clyde G.

    1982-01-01

    The present invention is directed to a sacrificial or competitive adsorbate for surfactants contained in chemical flooding emulsions for enhanced oil recovery operations. The adsorbate to be utilized in the method of the present invention is a caustic effluent from the bleach stage or the weak black liquor from the digesters and pulp washers of the kraft pulping process. This effluent or weak black liquor is injected into an oil-bearing subterranean earth formation prior to or concurrent with the chemical flood emulsion and is adsorbed on the active mineral surfaces of the formation matrix so as to effectively reduce adsorption of surfactant in the chemical flood. Alternatively, the effluent or liquor can be injected into the subterranean earth formation subsequent to a chemical flood to displace the surfactant from the mineral surfaces for the recovery thereof.

  14. Synthesis of M-type hexaferrites from steel pickling liquors (ID 109)

    Science.gov (United States)

    Dufour, J.; Latorre, R.; Alcalá, E. M.; Negro, C.; Formoso, A.; López-Mateos, F.

    1996-05-01

    The recovery of steel pickling liquors is one of the main environmental aspects that the steelmaking industry must resolve. We propose the synthesis of barium M-type hexaferrite from these liquors as a recovery treatment. Two methods of synthesis have been studied: a variation of the ceramic method, and an oxicoprecipitation process. Products with excellent magnetic properties have been obtained.

  15. Study on recovery of DMSO from mother liquor of fluorescence bleacher 351%从荧光增白剂351母液中回收二甲基亚砜的研究

    Institute of Scientific and Technical Information of China (English)

    郑阿龙; 张存社; 沈寒晰; 郭鹏涛

    2012-01-01

    Fluorescent brighteners mother liquor contains nearly 50% of DMSO, and vacuum distillation was used to recycle. The effect of vacuum degree, the pH value on DMSO recovery rate was studied. The results showed that; the best conditions of vacuum distillation recycling DMSO were: vacuum degree 95 kPa,pH 8.5. Under these conditions, the DMSO recovery rate can reach 87. 8%.%荧光增白剂351生产母液中含有近50%的二甲基亚砜(DMSO),采用减压蒸馏进行回收,对影响DMSO回收率的因素真空度、pH值进行了研究.结果表明,减压蒸馏回收DMSO的最佳条件为:真空度95 kPa,pH值8.5.在此条件下,DMSO的回收率可达到87.8%.

  16. Análisis Termodinámico de un Sistema de Cogeneración con Gasificación del Licor Negro Thermodynamic Analysis of a Cogeneration System with Black Liquor Gasification

    Directory of Open Access Journals (Sweden)

    Paulo R Santos

    2008-01-01

    Full Text Available Se presenta el análisis termodinámico de un proceso de cogeneración de energía con gasificación del licor negro, utilizando balances de exergía para identificar y cuantificar las principales irreversibilidades presentes. Se realizó una simulación del proceso de cogeneración con un simulador comercial, a partir de la cual fue posible realizar el balance de exergía del sistema. Se evaluó la influencia de la composición de los gases obtenidos en el gasificador sobre las pérdidas exergéticas en el proceso. Las condiciones operacionales del gasificador de licor negro que contribuyen a reducir la concentración de estos compuestos responsables de las pérdidas de exergía, son la baja temperatura (700°C y la baja presión (200 kPa. El análisis mostró útil para determinar de viabilidad técnica del proceso alternativo de generación de energía a través de la gasificación del licor negro.This work presents a thermodynamic analysis of a cogeneration energy process with black liquor gasification obtained in pulp and paper industries, using exergy balances to identify and quantify the main irreversibilities in the process. The cogeneration process was analyzed using a commercial simulator from which it was possible to develop the exergy balance. The influence of the composition of the gases produced in the gasifier over the exergy losses in the process was evaluated. The most appropriated operating conditions in the gasifier to reduce the concentration of these components, which are responsible for the exergy losses are the low temperature (700 ºC and the low pressure (200 kPa. The analysis showed to be useful to determine the technical viability of this alternative process of energy generation using black liquor gasification.

  17. DETERMINACIÓN DE FENOLES TOTALES EN DERIVADOS LÍGNICOS OBTENIDOS DEL “LICOR NEGRO” COMO ALTERNATIVA DE PRODUCCIÓN // DETERMINATION OF TOTAL PHENOL DERIVATIVES OBTAINED FROM LIGNIN "BLACK LIQUOR" AS ALTERNATIVE TO PRODUCTION

    Directory of Open Access Journals (Sweden)

    María José López Villalobos

    2015-06-01

    Full Text Available Lignin is an industrial waste being worthless in papermaking byproduct of black liquor obtained from the pulping process in some Venezuelan plants. The black liquor is obtained from the Kraft pulping process to extract lignin sulphite by acid precipitation and quantify the amount of total phenols in such lignin products used in this study. Spectrophotometry Molecular absorption in the UV-Visible and Infrared Spectroscopy (FTIR region were used to carry out these study techniques. The products obtained in the study had the same signs than commercial lignin (LA, along with the extracted lignin present little degradation HCl, confirmed by infrared spectra. Also, the amount of total phenols was quantified in derivative lignin obtained using the Folin-Ciocalteu. In the sulphite process extracted lignin with acetic acid derivative contains more phenols, and in the Kraft process, the derivative lignin extracted with fewer nitric acid present. The amount of total phenolics present in these derivatives are good for making antiseptics, detergents, nylon, resin and many industrial products. // RESUMEN La lignina es un subproducto del licor negro obtenido del proceso de despulpado en algunas plantas de Venezuela, siendo un desecho industrial que carece de valor en la fabricación de papel. En este estudio se utilizó el licor negro obtenido de los procesos de pulpado Kraft y Sulfito para extraer la lignina mediante precipitaciones ácidas y cuantificar la cantidad de fenoles totales en dichos productos lígnicos. Para llevar a cabo este estudio, se utilizaron las técnicas de Espectrofotometría de Absorción Molecular en la región UV-Visible y la Espectroscopia de Infrarrojo (FTIR. Los productos obtenidos en el estudio presentaron señales similares que la lignina comercial (LA, además la lignina extraída con HCl presentó poca degradación, corroborado por los espectros infrarrojos. Asimismo, se cuantificó la cantidad de fenoles totales en los

  18. 造纸黑液和煤泥制备水煤浆的技术研究%TECHNOLOGY STUDY ON PREPARING COAL WATER MIXTURE BY USING SLIME AND PAPER-MAKING BLACK LIQUOR

    Institute of Scientific and Technical Information of China (English)

    李效其; 任瑞鹏; 吕永康

    2012-01-01

    将干燥的块状煤泥研磨至不同粒度的煤粉,与造纸黑液按一定比例配制成水煤浆,考察其综合性能指标.当黑液添加量为7.2%,煤粉粒度小于160目时,制备的水煤浆浓度为67.44%,流动性为A级,稳定性达到20 d保持良好.改变黑液的pH值,研究其配制的水煤浆,发现废液pH对水煤浆的成浆性没有太大的影响.由于造纸黑液中含有大量有机质,因此还可提高同等条件下水煤浆的燃烧热值.利用GB 213-87测定所制备水煤浆的恒容高位发热量为21.63 MJ/kg,低位发热量为15 MJ/kg.%Based on the character of high ash and large amount of moisture in the coal slime, and hard to handle of the actual situation of black liquor for paper making which contains abundant organism, it is an useful attempt by using dry method to make water coal mixture both as the raw material. The water coal mixture is made from powdered coal of different particle size which abrading the dry nubby coal slime and black liquor for paper making by a certain percentage in order to research the indicator of comprehensive performance. When the add content of black liquid is 7. 2% and the particle size of powdered coal is less than 160 mesh, the concentration of water coal mixture is 67. 44% , liquidity will be A grade and the stability will retain almost 20 d in good condition. The experiment results indicate that the pH value of waste almost has no effect on the slurry-ability of water coal slime if the pH value of black liquid is changed to research the prepared of water coal slime. Due to the black liquid of paper making contains large amount of or ganic matter, therefore, it can also improve the combustion heat value of water coal slime under the same conditions. The constant-volume high heat of the prepared water coal slime is 21. 63 MJ/kg, low heat is 15 MJ/kg, which is measured by GB 213-87.

  19. STUDIES ON THE RECOVERY PROCESS OF CEPHALEXIN FROM WASTE LIQUOR BY MACROPOROUS ADSORPTION RESIN%树脂吸附法回收头孢氨苄工艺研究

    Institute of Scientific and Technical Information of China (English)

    李丽娟; 刘崧; 石磊; 黄文杰; 马亚平

    2012-01-01

    A recovery process of Cephalexin from mother liquor of crude crystalline by macroporous adsorption resin was established. Among six kinds of macroporous resins HZ818, HZ832, HZ801, HZ816, D4020, and X-5, HZ816 resin had better performance for adsorption of Cephalexin. And the dynamic adsorption and desorption process of Cephalexin within liquor on HZ816 resin were studied. The adsorption capacities of HZ816 resin for Cephalexin was 45.4mg/mL, and Cephalexin adsorbed on the HZ816 resin could be effectively desorbed by 40% ethanol (pH 2.0). The average desorbing effeciency reached 94.5%. The final product's quality meeting the standards specified in 2010 edition of China Pharmacopoeia was obtained after crystallization, dry and so on. HZ816 resin was an ideal macroporous adsorbent for separating and purificating Cephalexin. This recovery process provided a new thought for the industrial production of Cephalexin.%为了从头孢氨苄结晶废母液中回收产品,采用大孔树脂吸附法对回收工艺进行了研究,比较了HZ818,HZ832,HZ801,HZ816,D4020,X-5等6种大孔吸附树脂对头孢氨苄的吸附性能,筛选出了高吸附性能的树脂,同时对头孢氨苄在HZ816吸附柱上的动态吸附-解吸过程进行了研究.其结果是:大孔吸附树脂HZ816能更好地分离回收头孢氨苄,其吸附量在45.4mg/mL左右,40%的乙醇(pH 2.0)可以将吸附在树脂柱上的头孢氨苄有效解吸,解吸率达94.5%,解吸液经结晶、干燥等后续处理可得到符合中国药典要求的产品.大孔吸附树脂HZ816是回收头孢氨苄的一种理想的吸附剂,该工艺简捷,具有很好的工业化前景.

  20. NW Black Sea ecosystems recovery from former severe seasonal hypoxia and effect on macrofauna

    Science.gov (United States)

    Gomoiu, Marian-Traian; Begun, Tatiana; Teaca, Adrian

    2013-04-01

    The benthos researches carried out in the last decade on the NW Black Sea shelf established the transitional process of the bottom communities, from the severe disturbed state resulted from seasonal hypoxia of high eutrophication from 1970-2000 period towards a new state. The authors, with their expertise achieved in the framework of several national and EU FP6&7 projects (SESAME, HYPOX, PERSEUS), analyzing more than 600 quantitative samples, consider the benthic associations influenced mainly by the Danube River discharge being characterized as follows: • decrease in the specific diversity (e.g. Mollusca - from 170 species in the 1960s - 1970s to 70 species in the present in NW Black Sea); • loss or diminishing of some habitat areas (typical habitat with Zostera, Phyllophora, Cystoseira, Barnea, Donacilla etc.); • increase in the numeric abundance and biomass of some specific benthic populations (Melinna, Alitta, Dipolydora etc.); • loss or reduction of some specific populations (Abra prismatica, Spisula subtruncata, Chamelia gallina etc.); • replacement of some strong and quite large benthic populations by metapopulation of small extension; • diminution of the biofilter strength by reduction of the filter - feeder populations; • qualitative and quantitative worsening of benthic biological resources, especially molluscs - forms playing an important ecological part and with great economic importance (mussel Mytilus galloprovincialis, soft-shell clam Mya arenaria, veined rapa whelk Rapana venosa); • thriving of opportunistic forms (especially worms populations causing sediment bioturbation - Melinna palmata, Heteromastus filiformis) and, temporarily, some exotic species recently pervading Black Sea (Mya, Anadara, Rapana etc.); • great quantitative fluctuations of all benthic populations; • occurrence of some weak sing of ecosystem recovery. However, recovery of the benthic ecosystem appears to be less certain although an improvement on

  1. Study on the Recovery Process of Mycophenolic Acid from Mother Liquor of Crude Crystalline%霉酚酸粗品结晶母液回收工艺研究

    Institute of Scientific and Technical Information of China (English)

    石磊

    2011-01-01

    OBJECTIVE To establish a recovery process for mycophenolic acid from mother liquor of crude crystalline. METHODS First, mycophenolic acid was transformed into the form of water-soluble salt by sodium hydroxide solution. Then mycophenolic acid was separated from the solution by macroporous resin D312. RESULTS The yield of transformation was over 90%. The overall yield of mycophenolic acid was increased by 10% , and product's quality met the standards. CONCLUSION This process has the advantages of high yield and low cost, so it is satisfactory and provides a new thread for the industrial production of mycophenolic acid.%目的 建立霉酚酸粗品结晶母液有效成分的回收工艺.方法 根据霉酚酸的化学特性,先用NaOH水溶液改变结晶母液pH,使霉酚酸从结晶母液中转化成易溶于水的相应盐,再采用大孔吸附树脂D312作为吸附剂从溶液中提取富集霉酚酸.结果 霉酚酸转化为钠盐收率在90%以上.回收工艺使提取总收率提高了10%以上,产品质量符合要求.结论 霉酚酸结晶母液回收工艺在提高总收率和降低生产成本上操作可行.该工艺具有工业参考的价值,为企业生产提供了一条新思路.

  2. Waste fatty acid addition to black liquor to decrease tall oil soap solubility and increase skimming efficiency in kraft mills pulping mountain pine beetle-infested wood

    Energy Technology Data Exchange (ETDEWEB)

    Uloth, V.; Guy, E. [FPInnovations, Prince George, BC (Canada). PAPRICAN Div.; Shewchuk, D. [Cariboo Pulp and Paper, Quesnel, BC (Canada); Van Heek, R. [Aker Kvaerner, Vancouver, BC (Canada)

    2009-07-01

    This paper presented the results of tests conducted to determine if the addition of waste fatty acids from vegetable oil processing might decrease tall oil soap solubility in pine-beetle impacted wood from British Columbia (BC). The soap recovery and tall oil production at BC mills has fallen by 30 to 40 percent in recent years due to the pulping of high proportions of grey-stage beetle-impacted wood. Full-scale mill tests were conducted over a 4-day period. The study showed that the addition of tall oil fatty acids or waste fatty acids from vegetable oil processing could decrease tall oil soap solubility and increase the soup skimming efficiency in mills pulping a large percentage of grey stage beetle-infested wood. The addition of fatty acids increased tall oil soap skimming efficiency from 50.2 percent in the baseline tests to 71.8 percent based on the total soap available, and from 76.7 percent in the baseline tests to 87.5 percent based on insoluble soap only. The economic analyses indicated that waste fatty acid addition could be economical when natural gas and oil prices are high. 4 tabs., 9 figs.

  3. Pyrolysis characteristics of main organic components of kraft pulping black liquor%硫酸盐法制浆黑液中主要有机组分的热解特性研究

    Institute of Scientific and Technical Information of China (English)

    戴涛; 武书彬; 郭大亮

    2013-01-01

    The pyrolysis characteristics of black liquor solids (BLS) and three major organic components including alkali lignin (AL), polysaccharide (PLS) and lignin-carbohydrate complexes (LCC) )were studied in a tubular furnace at 400 ~800℃ with 100℃ interval. The component distribution characteristics of the tar and gas were analyzed by gas chromatography with mass spectrometry (GC/MS) and gas chromatography (GC). The surface morphology and chemical structure groups of char were characterized by scanning electron microscopy ( SEM) and Fourier Transforms Infrared Spectroscopy ( FT-IR). The results show that the composition and distribution rules of pyrolysis products from BLS and its organic components pyrolysis are obviously different. AL, PLS and LCC have little effect on the yields of H2 and CO from BLS pyrolysis. The yield of CO2 from PLS pyrolysis is significantly higher than that from BLS, AL and LCC. Phenols and ethers in liquid products of BLS pyrolysis are mainly from the AL and LCC. Ketones and acids were resulted from AL, PLS, and LCC. The surface morphology of the BLS, AL, PLS, and LCC pyrolysis char is significant different. AL, PLS, and LCC affect each other in BLS pyrolysis process, and determine its pyrolysis characteristics together.%采用管式炉对硫酸盐法竹子、阔叶木混合制浆黑液固形物(BLS)及其三种主要组分碱木素(AL)、多糖(PLS)和木素-碳水化合物复合体(LCC),在400~ 800℃进行热解,全面分析了各相热解产物组成与分布规律.结果表明,BLS及其三种主要组分的热解产物组成与分布规律存在明显差异.AL、PLS和LCC对BLS热解产生H2和CO的产率影响不大,PLS热解生成CO2的能力明显高于BLS、AL和LCC.BLS热解液相产物中的酚类和醚类主要是来自AL和LCC;酮类和酸类是由AL、PLS和LCC共同贡献的.BLS、AL、PLS和LCC热解半焦表面形貌存在明显差异.在BLS热解过程中,AL、PLS和LCC会相互影响、相互制约,共同决定着BLS的热解特性.

  4. Factors controlling alkalisalt deposition in recovery boiler- release mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    McKeough, P.; Kylloenen, H.; Kurkela, M. [VTT Energy, Espoo (Finland). Process Technology Group

    1996-12-01

    As part of a cooperative effort to develop a model to describe the behaviour of inorganic compounds in kraft recovery boilers, an experimental investigation of the release of sulphur during black liquor pyrolysis has been undertaken. Previous to these studies, the mechanisms of sulphur release and the reasons for the observed effects of process conditions on sulphur release were very poorly understood. On the basis of the experimental results, the main reactions leading to sulphur release have been elucidated with a fair degree of certainty. Logical explanations for the variations of sulphur release with temperature and with liquor solids content have been proposed. The influence of pressure has been investigated in order to gain insights into the effects of mass transfer on the sulphur-release rate. In the near future, the research will be aimed at generating the kinetic data necessary for modelling the release of sulphur in the recovery furnace. (author)

  5. 非负载型加氢催化剂合成尾液回用研究%Study on Recovery of the Waste Liquor From Synthetic Process of Non-Supported Hydrogenation Catalysts

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Preparing the metallic oxide of non-supported hydrogenation catalysts can produce a large number of waste liquor, which contains Ni, Mo and W, etc. If the waste liquor is drained directly, it will cause serious environmental pollution. Preparing metallic oxide by using recycled waste liquor can maintain the metallic oxide high activity, improve the efficiency of material, realize the zero-emission target of waste liquor, and solve the environmental pollution problems in industrial production.%非负载型加氢催化剂金属氧化物合成过程中会产生大量含金属 Ni、Mo、W 的尾液,如直接排放,会对环境造成严重污染;将尾液回收再利用合成金属氧化物在保持较高活性的同时,不仅可以提高原料利用率,又能实现尾液零排放,解决工业生产过程中环境污染问题。

  6. Pomegranate liquor preparation and analysis

    OpenAIRE

    Galego, Ludovina; Leticia M. Estevinho; Silva, José Paulo

    2012-01-01

    The pomegranate (Punica granatum L.) liquor has been produced for several centuries in the south of Portugal, mainly in the mountain areas. The “Assaria” variety is the preferred cultivar due to its organoleptic properties and high arils to peel ratio. Wild pomegranates are also widely distributed but, despite the health benefits that have been associated to the fruits, they continue to be unappreciated for consumption. Liquor preparation is a very good alternative for wild pomegranate fruits...

  7. Ultrafast recovery time and broadband saturable absorption properties of black phosphorus suspension

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yingwei; Huang, Guanghui; Chen, Jiazhang; Xiao, Si, E-mail: sixiao@csu.edu.cn; He, Jun, E-mail: junhe@csu.edu.cn [Institute of Super-Microstructure and Ultrafast Process in Advanced Materials, School of Physics and Electronics, Central South University, 932 South Lushan Road, Changsha, Hunan 410083 (China); Mu, Haoran; Bao, Qiaoliang [Institute of Functional Nano and Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215123 (China); Lin, Shenghuang [Institute of Functional Nano and Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215123 (China); Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Hong Kong (China)

    2015-08-31

    As a new type of two-dimensional crystal material, black phosphorus (BP) exhibits excellent electronics and optical performance. Herein, we focus on carrier relaxation dynamics and nonlinear optical properties of BP suspension. Atomic force microscopy, transmission electron microscopy, and optical transmission spectrum are employed to characterize the structure and linear optical properties of the BP. Additionally, pump-probe experiments at wavelength of 1550 nm were carried out to study the carrier dynamics in BP suspension, and ultrafast recovery time was observed (τ{sub s} = 24 ± 2 fs). Furthermore, we demonstrate the saturable absorption signals by open aperture Z-scan experiments at wavelengths of 1550 nm, 532 nm, and 680 nm. The results indicate that BP has broadband saturable absorption properties and the nonlinear absorption coefficients were determined to be β{sub 2} = −0.20 ± 0.08 × 10{sup −3 }cm/GW (532 nm), β{sub 2} = −0.12 ± 0.05 × 10{sup −3 }cm/GW (680 nm), and β{sub 2} = −0.15 ± 0.09 × 10{sup −3 }cm/GW (1550 nm)

  8. Improvement of linerboard compressive strength by hot-pressing and addition of recovered lignin from spent pulping liquor

    OpenAIRE

    Saidan Motasem N.

    2015-01-01

    This paper evaluates the effect of addition of precipitated lignin, from spent pulping black liquor, to a wet single-ply linerboard handsheet followed by hot-pressing at different temperatures, on the improvement of its compressive strength. Linerboard handsheets for testing the effect of lignin addition were prepared so that the lignin-modified sheets would have the same basis weights as the control handsheets. Both the commercial and the black liquor lign...

  9. 基于热重红外的硫酸盐法黑液热解特性分析%TG-FT-IR Analysis of Pyrolysis Characteristics of Sulfate Black Liquor

    Institute of Scientific and Technical Information of China (English)

    刘超; 武书彬; 戴涛

    2014-01-01

    为了深入地探讨黑液热解的反应机理以及黑液热解过程中产物的释放规律,采用热重-红外联用( TG-FT-IR)技术对竹子和桉木混合硫酸盐法制浆黑液固形物( BLS)的热裂解过程进行了研究。 TG-FT-IR结果显示,BLS热解产物的释放主要集中在500~2000 s,热解产物主要是 CO2、CH4、H2O、CO、醇酚类化合物和醛酮类化合物。 BLS的整个热解过程可分为3个阶段,第1阶段的失重主要是原料中结合水的挥发引起的,此阶段的最大失重速率出现在105℃;第2失重阶段主要发生在173~518℃,失重率约为25.19%,主要产物是CO2、CH4、H2O、醇酚类化合物、醛酮类化合物以及少量的CO,此阶段CO2的生成量最大;第3阶段主要发生在722~1000℃,失重率接近39.05%,产物主要是CO,其它小分子产物的产率都很低。%To investigate the pyrolysis mechanism and the release law of pyrolysis products, the sulfate black liquor ( BLS) from bamboo&eucalyptus was pyrolyzed and the process was investigated by thermogravimetric analyzer coupled with Fourier transform infrared spectrometry ( TG-FT-IR) . The results revealed that the release of BLS pyrolysis products, such as CO2 , CH4 , H2 O, CO and alcohols & phenols, aldehydes & ketones, were mainly concentrated in 500-2 000 s. The BLS pyrolysis process could be divided into three stages. The weight loss in the first stage should be attributed to the release of bound water in the raw material and the maximum weight loss rate was observed at 105 ℃. During the second weight loss stage from 173 ℃ to 518 ℃, the weight loss rate was about 25. 19%, and the release products were CO2 , CH4 , H2 O, alcohols & phenols, aldehydes &ketones and a small amount of CO, and CO2 was the dominant product. The third weight loss stage was from 722℃ to 1 000℃, and the weight loss rate was nearly 39. 05%. In this stage, CO was the dominant product and very few amounts of other small molecule products

  10. 21 CFR 163.111 - Chocolate liquor.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Chocolate liquor. 163.111 Section 163.111 Food and... CONSUMPTION CACAO PRODUCTS Requirements for Specific Standardized Cacao Products § 163.111 Chocolate liquor. (a) Description. (1) Chocolate liquor is the solid or semiplastic food prepared by finely...

  11. Fate of nitrogen in the chemical recovery cycle of a kraft pulp mill

    Energy Technology Data Exchange (ETDEWEB)

    Kymaelaeinen, M. [Aabo Akademi, Turku (Finland). Process Chemistry Group

    2001-07-01

    The kraft pulping process is the dominant chemical method for producing wood pulp. In the process, about half the mass of the wood is dissolved, separated from the wood fibers and transferred to the chemical recovery cycle. Nitrogen in the wood mostly dissolves and goes on to the recovery cycle. This reactive nitrogen is the source of NO{sub x} emissions in the recovery boiler. Little information has been available regarding the nitrogen elsewhere in the recovery cycle. Ammonia (NH{sub 3}) emissions have been observed at many mills, especially around the causticizing area, but the causes of the emissions have not been understood. Furthermore, the smelt exiting the boiler has been found to contain a significant part of the black liquor nitrogen. This finding, and the general lack of knowledge regarding nitrogen flow and behavior in the other parts of the recovery cycle, were the incentives for this work. The main routes of the reactive nitrogen, including the main formation and release points for NH{sub 3} in the recovery cycle, were clarified at two operating pulp mills. The key reaction and rates for NH{sub 3} formation under process conditions were determined. In addition, the formation of the ammonia precursor - the smelt nitrogen - was studied under black liquor combustion conditions. Further, NO formation in black liquor combustion was investigated by the single droplet experimental technique. The results provide an overall understanding of the behavior of nitrogen in the recovery cycle. The smelt nitrogen exiting the recovery boiler was equal to about one third of the black liquor nitrogen introduced to the boiler. The smelt nitrogen was found gradually to convert to ammonia in the liquor cycle during the subsequent green and white liquor processing. From the experimental kinetic studies, the key reaction for ammonia formation was identified as the hydrolysis of cyanate (OCN{sup -}) under alkaline conditions. All the smelt nitrogen was finally removed from

  12. Desilication of spent liquors derived from alkaline pulping of non-wood plant fibres. Compendium on low- and non-waste technology. Addendum. Monograph

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1984-02-22

    Removal of silica from spent liquors of alkaline non-wood plant fiber pulping. When using non-wood annual plant as raw material for pulping a considerable amount of silica (SiO2) is carried into the process, which prohibits recycling of the quick lime to the causticizing process. The desilication of the black liquor requires steam boiler flue gas as the only reagent. Precipitated matter is separated from the liquor by means of conventional mechanical systems.

  13. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    OpenAIRE

    Silvia Simone; Carmela Conidi; Claudia Ursino; Alfredo Cassano; Alberto Figoli

    2016-01-01

    Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids), whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of o...

  14. Characteristics and sources of intermediate size particles in recovery boilers : final project report.

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Larry L. (Brigham Young University, Provo, UT); Shaddix, Christopher R.; Verrill, Christopher L. (Georgia Institute of Technology, Institute of Paper Science and Technology, Atlanta, GA); Wessel, Richard A. (Babcock & Wilcox Company, Barberton, OH)

    2005-02-01

    As part of the U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) Industries of the Future (IOF) Forest Products research program, a collaborative investigation was conducted on the sources, characteristics, and deposition of particles intermediate in size between submicron fume and carryover in recovery boilers. Laboratory experiments on suspended-drop combustion of black liquor and on black liquor char bed combustion demonstrated that both processes generate intermediate size particles (ISP), amounting to 0.5-2% of the black liquor dry solids mass (BLS). Measurements in two U.S. recovery boilers show variable loadings of ISP in the upper furnace, typically between 0.6-3 g/Nm{sup 3}, or 0.3-1.5% of BLS. The measurements show that the ISP mass size distribution increases with size from 5-100 {micro}m, implying that a substantial amount of ISP inertially deposits on steam tubes. ISP particles are depleted in potassium, chlorine, and sulfur relative to the fuel composition. Comprehensive boiler modeling demonstrates that ISP concentrations are substantially overpredicted when using a previously developed algorithm for ISP generation. Equilibrium calculations suggest that alkali carbonate decomposition occurs at intermediate heights in the furnace and may lead to partial destruction of ISP particles formed lower in the furnace. ISP deposition is predicted to occur in the superheater sections, at temperatures greater than 750 C, when the particles are at least partially molten.

  15. Recovery of Vanadium from H2SO4-HF Acidic Leaching Solution of Black Shale by Solvent Extraction and Precipitation

    Directory of Open Access Journals (Sweden)

    Xingbin Li

    2016-03-01

    Full Text Available The recovery of vanadium from sulfuric and hydrofluoric mixed acid solutions generated by the direct leaching of black shale was investigated using solvent extraction and precipitation methods. The process consisted of reduction, solvent extraction, and stripping, followed by precipitation and calcination to yield vanadium pentoxide. The influence of various operating parameters on the extraction and recovery of vanadium was studied. Vanadium (IV was selectively extracted using a mixture of 10% (v/v di(2-ethylhexylphosphoric acid and 5% (v/v tri-n-butylphosphate in sulfonated kerosene. Using six extraction and five stripping stages, the extraction efficiency for vanadium was 96.7% and the stripping efficiency was 99.7%. V2O5 with a purity of 99.52% was obtained by oxidation of the loaded strip solution and precipitation of ammonium polyvanadate at pH 1.8 to 2.2, followed by calcination of the dried precipitate at 550 °C for 2 h. It was concluded that the combination of solvent extraction and precipitation is an efficient method for the recovery of vanadium from a multi-element leach solution generated from black shale.

  16. Flue gas dust composition and fouling tendency in recovery boilers; Flygaskans sammansaettning och nedsmutsande tendens i sodapannan

    Energy Technology Data Exchange (ETDEWEB)

    Forssen, Mikael; Backman, Rainer; Wallen, Jonas; Hupa, Mikko [Aabo Akademi (Finland)

    2000-02-01

    In this work eight Swedish black liquors have been characterized for the following properties: Combustability and bed behavior; Dust formation tendency; Fouling tendency of dust; SO{sub 2} formation tendency; and, NO formation tendency. The research was made using; (i) chemical analysis of the samples, (ii) special laboratory scale combustion and pyrolysis tests and (iii) an advanced computer model (Recovery Boiler Chemistry Advisor) for calculating the chemical composition and melting properties of the flue gas dust (fly ash). All tests and analysis were successfully performed and the results were reproducible and reliable. The results were classified for each of the five properties from one to five, and summarised into a table. The liquors showed good or extremely good combustability, also the behavior of the bed was normal or extremely good. None of the liquors had extremely high or low values in their swelling tendency or in their total combustion times. The liquors showed bigger differences in their tendency to form dust. Most of the liquors were 'good' because of the lower than normal tendency to form dust during combustion. Only one of the liquors, liquor B, was rated as 'bad', one of the liquors, liquor E, was rated 'extremely good', in other words liquor B had the highest tendency to form dust whereas liquor E had the lowest tendency to form dust. The advanced computer modelling work gave the composition, and the melting properties for the two dust components, carry-over and the condensed dust. The fouling tendency of the liquors were extremely good (low), the differences were so small that no distinction could be made between the liquors. Compared to earlier studies, the sticky temperature, T{sub 15}, for the eight liquors were extremely high, for both modelling cases when the combustion was assumed to take place either in a 'cold' or in a 'hot' furnace. This is partly explained by the fact that the

  17. Study on Preparation and Properties of Black Liquor Montmorillonite Complex/PVC/NBR Thermoplastic Elastomer%黑液-蒙脱土/聚氯乙烯/丁腈橡胶热塑性弹性体的制备及性能研究

    Institute of Scientific and Technical Information of China (English)

    杜鹏; 曹仲林; 苏胜培

    2011-01-01

    采用蒙脱土对造纸黑液中的木质素进行絮凝沉淀,制备黑液-蒙脱土复合物(BL-MMT),然后将其应用于聚氯乙烯/丁腈橡胶(PVC/NBR)热塑性弹性体,并对其力学性能、耐老化性能及热降解性能进行测试.结果表明:随着BL-MMT中木质素蒙脱土比例增大,热塑性弹性体力学性能先增大后减小,适宜配比m(木质素):m(蒙脱土)=1:1.BL-MMT份数增大,热塑性弹性体力学性能先增大后减小,20份时出现最大值.BL-MMT填充的PVC/NBR热塑性弹性体与添加炭黑和碳酸钙相比,力学性能和热性能相当,而耐老化性能更为优越.黑液-蒙脱土复合物可望用作PVC/NBR热塑性弹性体的补强剂.%A black liquor-montmorillonite complex (BL-MMT) was prepared by flocculating precipitation of lignin in black liquor with montmorillonite, and applied in the preparation of PVC/NBR thermoplastic elastomer composites. The mechanical properties,aging performance and thermal properties of the PVC/NBR composites were tested. The experimental results indicated that the mechanical properties of BL-MMT/PVC/NBR composites were affected by the loadings and composition of BL-MMT complex. A high performance was achieved at a lignin/ MMT ratio of 1:1. The mechanical properties of BL-MMT/PVC/NBR increase with the loading of BL-MMT up to 20 phr. A comparison study was also performed using carbon black and calcium carbonate as comparative fillers. There is no significant mechanical and thermal property difference among BL-MMT,carbon black and calcium carbonate as fillers for PVC/NBR composites. However,the aging property of BL-MMT/PVC/NBR was the best. All experimental results indicated that BL-MMT could be an effective reinforcing agent in PVC/NBR thermoplastic elastomer.

  18. 27 CFR 31.203 - Possession of used liquor bottles.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Possession of used liquor... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used Liquor Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  19. Recovery of the black-footed ferret : Progress and continuing challenges

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report is a collection of published papers from the Symposium on the Status of the Black-footed Ferret and Its Habitat, held January 28–29, 2004, in Fort...

  20. PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

    OpenAIRE

    Carolina M. Furtado; Aline dos Santos Stolz; Fernanda L. Pinto; Angela B. D. Moura; Fernando Dal Pont Morisso; Ana Paula Pitarelo; Luiz Pereira Ramos; Carin von Mühlen; Izabel C. Riegel-Vidotti

    2015-01-01

    Acacia mearnsii de Wild (black wattle) is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with...

  1. The recovery boiler advisor. Combination of practical experience and advanced thermodynamic modelling

    Energy Technology Data Exchange (ETDEWEB)

    Backman, R. [Aabo Akademi, Turku (Finland); Eriksson, G. [LTH/RWTH (Germany); Sundstroem, K. [Tampella Power Oy, Tampere (Finland)

    1996-12-31

    The Aabo Advisor is a computer based program intended to provide information about the high temperature ash and fluegas chemistry in pulping spent black liquor recovery boilers of kraft pulp mills. The program can be used for predictions of a variety of furnace and flue gas phenomena, such as fireside fouling of the heat exchanger surfaces caused by the flue gas particulate matter, emissions of SO{sub 2}(g), HCl(g) and NO{sub x}(g) with the flue gas etc. The program determines the composition of the fluegas as well as the amount and composition of the two typical fly ash fractions found in recovery boiler fluegases, the condensed fly ash particles and the carry over particles. These data are used for calculating the melting behavior of the fly ash present at different locations in the boiler and this characteristic behavior is used for the fireside fouling predictions. The program may also be used for studying how different mill processes affecting the black liquor composition affects on the fireside chemistry of the recovery boiler. As input data for the calculations only a few boiler operation parameters and the composition of the black liquor is required. The calculations are based on a one-dimensional, multi-stage chemistry model where both thermodynamic equilibrium calculations and stoichiometric material balances are used. The model calculates at first the chemistry in the lower furnace and smelt after which it moves to the upper furnace and the radiative parts of the fluegas channel. As the last block the program calculates the chemistry in the convective part, the electrostatic precipitator cath and stack. The results from each block are presented in tables, key numbers and melt curves representing the fluegas or fly ash fraction present at each location

  2. MRI of fat necrosis of the breast: The “black hole” sign at short tau inversion recovery

    International Nuclear Information System (INIS)

    Objective: To describe MRI features of fat necrosis of the breast. Materials and methods: Twenty-five lesions in 16 patients were retrospectively analyzed. MRI was performed due to equivocal findings at conventional imaging after surgical treatment of cancer (n = 14) or during anticoagulant therapy (n = 1), after focal mastitis treated with ductal resection (n = 1). In the 15 patients with previous surgery MRI was performed after a median interval of 24 months, using short tau inversion recovery (STIR) and contrast-enhanced dynamic T1-weighted sequences. Signal-to-noise ratio (SNR) inside the lesion and surrounding healthy fat was calculated on both STIR and unenhanced T1-weighted images. Maximal lesion diameter was measured on STIR images. All lesions had final clinical and imaging assessment in favor of fat necrosis and negative clinical and imaging follow-up (21–40 months; median 24 months). Results: At STIR sequence, fat necrosis appeared as a “black hole”, being markedly hypointense (median SNR = 29) compared with surrounding fat (median SNR = 95) (P < 0.001), while no significant difference was found at unenhanced T1-weighted sequence. No significant correlation with time from treatment was found. Of 25 lesions, 15 showed ring enhancement, with continuous increase (n = 10), plateau (n = 2), or wash-out curve (n = 3). The 11 enhancing lesions in the 8 patients with previous radiation therapy showed an initial enhancement higher than that of the 4 enhancing lesions in the 2 patients who did not, although the difference was not significant (P = 0.104). Conclusion: Fat necrosis of the breast exhibits a “black hole” sign on STIR images, allowing for an easier diagnosis in clinical practice.

  3. Rapid measurement of free cyanide in liquor by ion chromatography with pulsed amperometric detection.

    Science.gov (United States)

    Wu, Wenlin; Xiao, Quanwei; Zhang, Ping; Ye, Mei; Wan, Yuping; Liang, Hengxing

    2015-04-01

    This study investigated the measurement of free cyanide in liquor by ion chromatography coupled with pulsed amperometric detection (IC-PAD). Eluent concentration, interferent evaluation and method performance were discussed. Results show that free cyanide in liquor can be rapidly determined by the optimised IC-PAD method. A sample requires only 1:100 dilution and simple filtration before being subjected to IC-PAD. The linear range is 1-5000 μg/L with an R value of 0.9998. The detection limit is 1 μg/L for a 25 μL injection loop. The overall relative standard deviation (RSD) of the method is less than 5%, and the recovery range is from 98.1% to 105.0%. This study has been proven significant and may have potential applications in liquors analysis.

  4. Recovery boiler model; Soodakattilan kehitystyoe III

    Energy Technology Data Exchange (ETDEWEB)

    Janka, K.; Ylitalo, M.; Sundstroem, K.; Helke, R.; Heinola, M. [Kvaerner Pulping Oy, Tampere (Finland)

    1997-10-01

    The recovery boiler model was further tested and developed. At this moment the model includes submodels for: droplet drying, pyrolysis, char burning, gas burning and for droplet trajectory. During 1996 the formation of CH{sub 4} during pyrolysis and release of sulfur was included to the model. Further the formation of NO from fuel nitrogen and formation of thermal- NO were included to the model using Arrhenius type reaction rate equations. The calculated results are realistic and the model is used as a tool to find out methods to increase the efficiency and availability and decrease the emissions. Analysing the results of the earlier field study of 8 boilers showed that the furnace heat load, fuming rate, find the black liquor composition have influence on the enrichment of the potassium to the fly ash. (orig.)

  5. Cardiovascular magnetic resonance of myocardial edema using a short inversion time inversion recovery (STIR) black-blood technique:Diagnostic accuracy of visual and semi-quantitative assessment

    OpenAIRE

    h-Ici Darach O; Ridgway John P; Kuehne Titus; Berger Felix; Plein Sven; Sivananthan Mohan; Messroghli Daniel R

    2012-01-01

    Abstract Background The short inversion time inversion recovery (STIR) black-blood technique has been used to visualize myocardial edema, and thus to differentiate acute from chronic myocardial lesions. However, some cardiovascular magnetic resonance (CMR) groups have reported variable image quality, and hence the diagnostic value of STIR in routine clinical practice has been put into question. The aim of our study was to analyze image quality and diagnostic performance of STIR using a set of...

  6. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes.

    Science.gov (United States)

    Simone, Silvia; Conidi, Carmela; Ursino, Claudia; Cassano, Alfredo; Figoli, Alberto

    2016-01-01

    Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids), whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF) membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride) (PVDF) hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM). Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP). Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m²·h·bar), coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m²·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively. PMID:26805899

  7. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    Directory of Open Access Journals (Sweden)

    Silvia Simone

    2016-01-01

    Full Text Available Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids, whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride (PVDF hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM. Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP. Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m2·h·bar, coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m2·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively.

  8. Hydrologic and Geochemical Evaluation of Aquifer Storage Recovery in the Santee Limestone/Black Mingo Aquifer, Charleston, South Carolina, 1998-2002

    Science.gov (United States)

    Petkewich, Matthew D.; Parkhurst, David L.; Conlon, Kevin J.; Campbell, Bruce G.; Mirecki, June E.

    2004-01-01

    The hydrologic and geochemical effects of aquifer storage recovery were evaluated to determine the potential for supplying the city of Charleston, South Carolina, with large quantities of potable water during emergencies, such as earthquakes, hurricanes, or hard freezes. An aquifer storage recovery system, including a production well and three observation wells, was installed at a site located on the Charleston peninsula. The focus of this study was the 23.2-meter thick Tertiary-age carbonate and sand aquifer of the Santee Limestone and the Black Mingo Group, the northernmost equivalent of the Floridan aquifer system. Four cycles of injection, storage, and recovery were conducted between October 1999 and February 2002. Each cycle consisted of injecting between 6.90 and 7.19 million liters of water for storage periods of 1, 3, or 6 months. The volume of recovered water that did not exceed the U.S. Environmental Protection Agency secondary standard for chloride (250 milligrams per liter) varied from 1.48 to 2.46 million liters, which is equivalent to 21 and 34 percent of the total volume injected for the individual tests. Aquifer storage recovery testing occurred within two productive zones of the brackish Santee Limestone/Black Mingo aquifer. The individual productive zones were determined to be approximately 2 to 4 meters thick, based on borehole geophysical logs, electromagnetic flow-meter testing, and specific-conductance profiles collected within the observation wells. A transmissivity and storage coefficient of 37 meters squared per day and 3 x 10-5, respectively, were determined for the Santee Limestone/Black Mingo aquifer. Water-quality and sediment samples collected during this investigation documented baseline aquifer and injected water quality, aquifer matrix composition, and changes in injected/aquifer water quality during injection, storage, and recovery. A total of 193 water-quality samples were collected and analyzed for physical properties, major and

  9. EFFECT OF LIGNIN ON ENZYMATIC SACCHARIFICATION OF HARDWOOD AFTER GREEN LIQUOR AND SULFURIC ACID PRETREATMENTS

    Directory of Open Access Journals (Sweden)

    Douyong Min,

    2012-02-01

    Full Text Available Red maple, sweet gum, trembling aspen, red alder, and Eucalyptus globulus samples were pretreated with dilute sulfuric acid and green liquor before enzymatic saccharification. Substrates showed different levels of delignification and sugar recovery, depending on the applied pretreatments and the syringaldehyde/vanillin ratio (S/V. Three major conclusions were drawn in this research. First, lignin is the greatest contributor to recalcitrance of hardwood to enzymatic saccharification. Second, a high S/V ratio is a useful indicator of high delignification during a pretreatment process. Third, green liquor pretreatment is a promising pretreatment method because of a high delignification degree and sugar recovery. In addition, xylan also contributes to the recalcitrance of hardwoods toward enzymatic saccharification.

  10. 27 CFR 26.50 - Formulas for liquors.

    Science.gov (United States)

    2010-04-01

    ....C. 5232, the formula shall include a statement to that effect. If any product contains liquors made outside of Puerto Rico, the country of origin for each such liquor shall be stated on the formula. These.... If any wine contains liquors made outside of Puerto Rico, the country of origin for each such...

  11. 27 CFR 31.202 - Possession of refilled liquor bottles.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Possession of refilled... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used Liquor Bottles § 31.202 Possession of refilled liquor bottles. No person who sells, or offers for...

  12. 27 CFR 31.31 - Retail dealer in liquors.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Retail dealer in liquors... Classified § 31.31 Retail dealer in liquors. (a) General. Except as otherwise provided in paragraph (b) of... other than a dealer is a retail dealer in liquors for purposes of this part. Every retail dealer...

  13. Daqu - a traditional Chinese liquor fermentation starter

    NARCIS (Netherlands)

    Zheng, X.; Rezaei Tabrizi, M.; Nout, M.J.R.; Han, B.

    2011-01-01

    Chinese liquor is one of the world's oldest distilled alcoholic beverages, and it is typically obtained with the use of Daqufermentation starters. Daqu is a saccharifying and fermenting agent, having a significant impact on the flavour of the product. Daqucan be categorized according to maximum incu

  14. Ozonização em meio básico para redução de cor do licor negro de indústria de celulose de algodão Color reduction of black liquor from cotton cellulose industry using ozonation in an alkaline medium

    Directory of Open Access Journals (Sweden)

    José Roberto Guimarães

    2010-03-01

    Full Text Available As indústrias de papel e celulose descartam no ambiente um grande volume de efluente contendo grande quantidade da substância lignina, que atribui coloração e apresenta considerável potencial de toxicidade. Neste trabalho, foi avaliada a ozonização em meio básico para a redução de cor do licor negro gerado por uma indústria de celulose de algodão. Face aos resultados, foi possível observar que, para menores concentrações iniciais de ozônio (0,4 gO3 L-1 h-1, foi necessário um tempo mais longo de ozonização para se obter a redução desejada de 80% da cor. O consumo específico de ozônio, entretanto, em comparação a experimentos com dosagens mais elevadas (4,3 gO3 L-1 h-1 foi menor. Sugere-se que o oxigênio molecular desempenhe, também, um importante papel na oxidação dos compostos, participando do mecanismo de oxidação iniciado por radical hidroxila, •OH, formado na ozonização em meio básico.Pulp and paper mills discharge large amounts of wastewater containing high concentrations of lignin, a coloring substance that is dangerous and presents high toxicity to the environment. In this study, ozonation in alkaline ambience was evaluated for color reduction in black liquor, generated in a cotton linter mill. It was observed that the ozonation time to reach 80% color reduction was higher at a lower initial ozone dose (0,4 gO3 L-1 h-1 in comparison to a higher initial ozone dose (4,3 gO3 L-1 h-1. On the other hand, the amount of consumed oxidant was lower at the lower ozone dose. It is suggested that molecular oxygen participates in the oxidation mechanism of colored compounds, which is initiated by hydroxyl radicals (•OH formed during ozonation in alkaline ambience.

  15. Novel Pulping Technology: Directed Green Liquor Utilization (D-GLU) Pulping

    Energy Technology Data Exchange (ETDEWEB)

    Lucian A. Lucia

    2005-11-15

    The general objectives of this new project are the same as those described in the original proposal. Conventional kraft pulping technologies will be modified for significant improvements in pulp production, such as strength, bleachability, and yield by using green liquor, a naturally high, kraft mill-derived sulfidity source. Although split white liquor sulfidity and other high sulfidity procedures have the promise of addressing several of the latter important economic needs of pulp mills, they require considerable engineering/capital retrofits, redesigned production methods, and thus add to overall mill expenditures. Green liquor use, however, possesses the required high sulfidity to obtain in general the benefits attributable to higher sulfidity cooking, without the required capital constraints for implementation. Before introduction of green liquor in our industrial operations, a stronger understanding of its fundamental chemical interaction with the lignin and carbohydrates in US hardwood and softwoods must be obtained. In addition, its effect on bleachability, enhancement of pulp properties, and influence on the overall energy and recovery of the mill requires further exploration before the process witnesses widespread mill use in North America. Thus, proof of principle will be accomplished in this work and the consequent effect of green liquor and other high sulfide sources on the pulping and bleaching operations will be explored for US kraft mills. The first year of this project will generate the pertinent information to validate its ability for implementation in US pulping operations, whereas year two will continue this work while proceeding to analyze pulp bleachability and final pulp/paper properties and develop a general economic and feasibility analysis for its eventual implementation in North America.

  16. Imidacloprid in processed tea and tea liquor

    Institute of Scientific and Technical Information of China (English)

    SANYAL N.; HAZRA D.; PAL R.; SOMCHAUDHURY A.K.; CHOWDHURY A.

    2006-01-01

    Imidacloprid is a newly introduced broad-spectrum chloronicotinyl insecticide and will find its way in agricultural production, particularly in Asia. However, information on the fate of imidacloprid in crop plants is lacking. The degradation of imidacloprid in processed CTC tea and tea liquor was investigated in the present study in which imidacloprid was applied at recommended application rate (30.0 g a.i./ha) and twice the recommended application rate (60.0 g a.i./ha) for three consecutive seasons. Imidacloprid was rapidly dissipated in processed tea following first order reaction kinetics at all application rates and had half-lives of 0.91~1.16 d with the residue in tea liquor found to be below detectable limit on 3rd day samples. The study revealed that imidacloprid is safe for human consumption and will not pose any residual toxicity problem.

  17. Eyelid liquoric fistula secondary to orbital meningocele

    Directory of Open Access Journals (Sweden)

    Renato Antunes Schiave Germano

    2015-02-01

    Full Text Available Liquoric fistula (LF is defined as the communication of the subarachnoid space with the external environment, which main complication is the development of infection in the central nervous system. We reported the case of a patient with non-traumatic eyelid liquoric fistula secondary to orbital meningocele (congenital lesion, which main clinical manifestation was unilateral eyelid edema. Her symptoms and clinical signs appeared in adulthood, which is uncommon. The patient received surgical treatment, with complete resolution of the eyelid swelling. In conclusion, eyelid cerebrospinal fluid (CSF fistula is a rare condition but with great potential deleterious to the patient. It should be considered in the differential diagnosis of unilateral eyelid edema, and surgical treatment is almost always mandatory.

  18. Reduction in Ammonium Ions in Sludge Liquor

    Directory of Open Access Journals (Sweden)

    Eglė Šlajūtė

    2013-12-01

    Full Text Available Liquor rejected from the centrifugation of the digested sludge can contain the concentrations of ammonium ions up to 1750 mg/L. These loads are usually returned to the intake of wastewater treatment plants (WWTP without additional treatment and can have a negative impact on biological wastewater and/or sludge treatment processes, e.g. phosphorus and nitrogen removal. This article deals with the use of naturally obtained sorbent, zeolite, in batch and column test procedure for removing ammonium from the rejected liquor. This research study was carried out using different sizes of zeolite particles: 0.8–1.6 mm and 1.6–2.5 mm. The highest efficiency of ammonium removal (up to 98 % was achieved by applying the zeolite particles of 0.8–1.6 mm.Article in Lithuanian

  19. Comparative Study of an Enhanced Oil Recovery process with various chemicals for Naharkatiya Oil Field

    Directory of Open Access Journals (Sweden)

    Kalpajit Hazarika

    2014-12-01

    Full Text Available This paper reports the effect of using black liquor whose main constituent is Na- lignosulfonate, which is the effluent from Nagaon paper Mill, Jagiroad, Assam, along with Alkali and Co-surfactant in enhanced crude oil recovery from Upper Assam porous media. In this paper an attempt has been done to study the change in Inter Facial Tension (IFT with different concentration of Surfactant and also a comparative study has been done determine the change in IFT with or without Alkali and Co-Surfactant. Increasing the surfactant concentration reduces the IFT, hence increases the recovery efficiency. Alkali changes the Wettability of reservoir rock and reduces the surfactant adsorption and also act as an in-situ surfactant production.

  20. Formation causes and recovery of the "Black Soil Type" degraded alpine grassland in Qinghai-Tibetan Plateau

    Institute of Scientific and Technical Information of China (English)

    SHANG Zhanhuan; LONG Ruijun

    2007-01-01

    The formation causes and ecological rebuilding of the "Black Soil Type" degraded alpine grassland are summarized.The formation of the "Black Soil Type" degraded grassland was caused mainly by climate warming,decreasing glaciers,overgrazing,and damage by rats.The ecological restoration of the "Black Soil Type" degraded alpine grassland relies not only on grassland building,but also on reasonable management and planning of grassland resources.Guaranty measures for developing the alpine grassland animal husbandry in a healthy way include intensifying the educational investment in pasture regions,practicing long-term contracts for grassland,and strengthening the grassland legislation.The authors believe that the Qinghai-Tibetan Plateau ecosystem has a special characteristic inertia or "inert gases",which weaken the self-renewing capability of the ecosystem and makes its structure frail.The inertia characteristic may be the important reason that makes ecological rebuilding so difficult;in addition,other problems need to be studied deeply to provide scientific bases for the ecological building in the Qinghai-Tibetan Plateau.

  1. Imidacloprid in processed tea and tea liquor*

    OpenAIRE

    Sanyal, N.; Hazra, D.; Pal, R; Somchaudhury, A.K.; Chowdhury, A.

    2006-01-01

    Imidacloprid is a newly introduced broad-spectrum chloronicotinyl insecticide and will find its way in agricultural production, particularly in Asia. However, information on the fate of imidacloprid in crop plants is lacking. The degradation of imidacloprid in processed CTC tea and tea liquor was investigated in the present study in which imidacloprid was applied at recommended application rate (30.0 g a.i./ha) and twice the recommended application rate (60.0 g a.i./ha) for three consecutive ...

  2. Estudo do liquor de cupuaçu Study of cupuassu liquor

    Directory of Open Access Journals (Sweden)

    Kelly de Oliveira Cohen

    2005-03-01

    Full Text Available O cupuaçu (Theobroma grandiflorum Schum, que é um fruto amazônico, vem conquistando a cada ano mais espaço no mercado nacional e internacional com a comercialização de sua polpa. Suas sementes, consideradas como subproduto, vem despertando interesse não só no mundo científico como pelas indústrias. Sabe-se que, a partir das sementes, pode-se obter produtos análogos aos oriundos das sementes de cacau, seguindo as mesmas etapas de processamento. Dentre esses produtos tem-se o liquor de cupuaçu, semelhante ao liquor de cacau que é um dos ingredientes da formulação do chocolate. Este trabalho teve como objetivo o estudo da obtenção e caracterização física, química e físico-química do liquor de cupuaçu. Obteve-se três amostras de liquor de cupuaçu, cada qual partindo de lotes diferentes de fermentação. Foram avaliados a composição centesimal e o comportamento reológico. O liquor de cupuaçu apresentou alto teor de lipídios (63,93 a 66,51% e alto valor calórico (677,35 a 691,17kcal/100g. O teor de proteínas variou de 8,95 a 10,31%. A viscosidade plástica de Casson diminuiu com o aumento de temperatura. A distribuição do tamanho das partículas influenciou nas diferenças de viscosidades entre as amostras, havendo maior redução de viscosidade plástica com o aumento da temperatura nas amostras que apresentaram maior diâmetro de partículas. A gordura de cupuaçu apresentou comportamento newtoniano à 40ºC.Cupuassu (Theobroma grandiflorum Schum is an amazon fruit, that each year is conquering more space in national and international market with the commercialization of its pulp. Its seeds, considered as subproducts, are arousing interest not only in the scientific world but also in the industry. It's known that from those seeds, it can be obtained analogous products as those cocoa seeds, following the same stages of processing. Among those products there is the cupuassu liquor, similar to cocoa liquor that is one

  3. Three dimensional computer simulation for NO{sub x} emission in Oestrand recovery boiler

    Energy Technology Data Exchange (ETDEWEB)

    Tao Lixin [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Metallurgy

    2000-05-01

    This report presents the results achieved in a research project (no. 663021) financed by NUTEK and AAFORSK. The objective of this project is to develop and validate a proper NO{sub x} model for black liquor recovery boilers. The project has been carried out through a close co-operation between the division of Heat and Furnace Technology at KTH, the combustion chemistry research group at Aabo Akademi University in Finland and AaF Energikonsult Stockholm AB. As a result from this project, a NO{sub x} model is developed as a new component in the general framework of the recovery boiler model: STAR-RBM. STAR-RBM is a fundamental three-dimensional computer model for the simulation of the flow, heat transfer, combustion and NO{sub x} emission in a black liquor recovery boiler. It is constructed around a general-purpose Computational Fluid Dynamics (CFD) package: STAR-CD. In this report, a three-dimensional numerical simulation for NO{sub x} emission in Oestrand recovery boiler is described and discussed. The NO{sub x} model developed in this project considers the NO formation from fuel-NO and thermal-NO mechanisms. The fuel-NO mechanism is proposed by Aabo Akademi University. It is assumed that the fuel nitrogen in black liquor is released via either devolatilization or char combustion. It has been found by laboratory studies that approximately 70% of the fuel nitrogen is released during devolatilization, mainly as NH{sub 3} and N{sub 2}. The overall gas phase reactions for fuel-NO chemistry is based on that of Mitchell and Tarbell. It has been found in this work that the kinetic rates of the fuel-NO reactions are generally higher than the rate of turbulence mixing. Thus, the eddy dissipation concept proposed by Magnussen and Hjertager is applied to calculate the rate of fuel-NO formation. The thermal-NO mechanism is based on an extended Zeldovich mechanism. Invoking a steady-state approximation for N-atom and assuming that the O-atom concentration may be calculated from

  4. Uranium and thorium determination in Santa Quiteria liquor by ICP-OES analysis

    Energy Technology Data Exchange (ETDEWEB)

    Pedro Junior, A.; Rezende, Paulo R.; Carvalho, Leonel M.; Ferreira, Elizabeth de Massena, E-mail: apjunior@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The mineral source of Itataia located in Santa Quiteria (Ceara/Brazil) is a phosphorus uraniferous one, where uranium occurs in collophanite (fluoroapatite) form. Phosphate minerals of the apatite family make possible the uses of uranium as a byproduct. The sulfuric leaching of the phosphate rock in order to obtain phosphoric acid also permits uranium recovery. Thus, the liquor coming from the leaching contains high levels of phosphoric acid as well as elements like Mg, Fe, U, Zr, Th and some rare earths in significant concentrations. The direct determination of U and Th content of this liquor is essential to a rapid response in the uranium separation and purification together process by solvent extraction, aiming its use for commercial purposes, as nuclear industry fuel. In this study U and Th were determined by Inductively Coupled Plasma Spectrometry (ICP-OES) in several samples of liquor, in high concentrations of H{sub 3}PO{sub 4} in environment. Several ratios of U/Th and H{sub 3}PO{sub 4} concentrations were studied, in order to find the optimal conditions for the direct determination of U and Th, without need to prior separation. (author)

  5. 27 CFR 5.46 - Standard liquor bottles.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Standard liquor bottles. 5.46 Section 5.46 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Standards of Fill...

  6. 27 CFR 31.42 - Restaurants serving liquors with meals.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Restaurants serving... Part Certain Organizations, Agencies, and Persons § 31.42 Restaurants serving liquors with meals. Proprietors of restaurants and other persons who serve liquors with meals to paying customers, even if...

  7. Liquor Activity Reduction (LAR) Programme - 12397

    Energy Technology Data Exchange (ETDEWEB)

    Pether, Colin; Carrol, Phil; Birkett, Eddie; Kibble, Matthew [Sellafield Ltd, Cumbria (United Kingdom)

    2012-07-01

    Waste material from the reprocessing of irradiated fuel has been stored under water for several decades leading to the water becoming highly radioactive. As a critical enabler to the decommissioning strategy for the Sellafield site, the Liquor Activity Reduction (LAR) programme has been established to provide a processing route for this highly radioactive liquor. This paper reviews the progress that has been made since the start of routine LAR transfer cycles (July 2010) and follows on from the earlier paper presented at WM2011. The paper focuses on the learning from the first full year of routine LAR transfer cycles and the application of this learning to the wider strategies for the treatment of further radioactive liquid effluents on the Sellafield site. During this period over 100,000 Curies of radioactivity has been safely removed and treated. The past year has witnessed the very successful introduction of the LAR programme. This has lead to hazard reduction at MSSS and demonstration that the SIXEP facility can meet the significantly increased challenge that the LAR programme represents. Part of the success has been the ability to predict and deliver a realistic production schedule with the availability of the MSSS, EDT and SIXEP facilities being central to this. Most importantly, the LAR programme has been successful in bringing together key stakeholders to deliver this work while integrating with the existing, day to day, demands of the Sellafield site. (authors)

  8. Recovery of aboveground plant biomass and productivity after fire in mesic and dry black spruce forests of interior Alaska

    Science.gov (United States)

    Mack, M.C.; Treseder, K.K.; Manies, K.L.; Harden, J.W.; Schuur, E.A.G.; Vogel, J.G.; Randerson, J.T.; Chapin, F. S., III

    2008-01-01

    Plant biomass accumulation and productivity are important determinants of ecosystem carbon (C) balance during post-fire succession. In boreal black spruce (Picea mariana) forests near Delta Junction, Alaska, we quantified aboveground plant biomass and net primary productivity (ANPP) for 4 years after a 1999 wildfire in a well-drained (dry) site, and also across a dry and a moderately well-drained (mesic) chronosequence of sites that varied in time since fire (2 to ???116 years). Four years after fire, total biomass at the 1999 burn site had increased exponentially to 160 ?? 21 g m-2 (mean ?? 1SE) and vascular ANPP had recovered to 138 ?? 32 g m-2 y -1, which was not different than that of a nearby unburned stand (160 ?? 48 g m-2 y-1) that had similar pre-fire stand structure and understory composition. Production in the young site was dominated by re-sprouting graminoids, whereas production in the unburned site was dominated by black spruce. On the dry and mesic chronosequences, total biomass pools, including overstory and understory vascular and non-vascular plants, and lichens, increased logarithmically (dry) or linearly (mesic) with increasing site age, reaching a maximum of 2469 ?? 180 (dry) and 4008 ?? 233 g m-2 (mesic) in mature stands. Biomass differences were primarily due to higher tree density in the mesic sites because mass per tree was similar between sites. ANPP of vascular and non-vascular plants increased linearly over time in the mesic chronosequence to 335 ?? 68 g m-2 y -1 in the mature site, but in the dry chronosequence it peaked at 410 ?? 43 g m-2 y-1 in a 15-year-old stand dominated by deciduous trees and shrubs. Key factors regulating biomass accumulation and production in these ecosystems appear to be the abundance and composition of re-sprouting species early in succession, the abundance of deciduous trees and shrubs in intermediate aged stands, and the density of black spruce across all stand ages. A better understanding of the controls

  9. Black to Black

    DEFF Research Database (Denmark)

    Langkjær, Michael Alexander

    2012-01-01

    Pop musicians performing in black stage costume take advantage of cultural traditions relating to matters black. Stylistically, black is a paradoxical color: although a symbol of melancholy, pessimism, and renunciation, black also expresses minimalist modernity and signifies exclusivity (as...

  10. Pulping byproducts as sacrificial agents in enhanced oil recovery by micellar flooding

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.S. Jr.; Westmoreland, C.G.

    1984-01-01

    A substantial bar to implementation of enhanced oil recovery by injection of surfactant formulations is the cost of large volumes of the chemicals. A large fraction of the chemicals is lost by adsorption on the minerals in oil-bearing formations or by precipitation by ions in the connate water or displaced from the minerals. Besides the cost, losses make difficult control of the intricate chemistry needed for optimal conditions. Cheap chemicals which would modify the formation by adsorbing competitively on the formation or by sequestering interfering ions could be important in advancing the approach. Substances generated in the pulping of wood by the kraft process are of possible interest, and evaluations of several are presented here. Of these, sodium saccharinate, caustic extract from bleaching, and weak black liquor seem promising.

  11. Thermal Analysis of Main Vessel in Uranium Liquor Critical Facility

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The thermal stress analysis of No.2 vessel in the Uranium Liquor Critical Facility is carried through, in order to research the thermal stability of the vessel and provide the data for general stress evaluation.

  12. Characteristics of Gouda cheese supplemented with fruit liquors.

    Science.gov (United States)

    Choi, Hee Young; Yang, Chul Ju; Choi, Kap Seong; Bae, Inhyu

    2015-01-01

    This study was conducted in order to evaluate the quality characteristics of Gouda cheeses supplemented with fruit liquor (Prunusmume or Cornus officinalis). Fruit liquor was supplemented to Gouda cheeses during preparation. Changes in chemical composition, lactic acid bacterial population, pH, water-soluble nitrogen, sensory characteristics, and proteolysis were monitored in the prepared ripened cheese. The electrophoresis patterns of cheese proteins, fruit liquor functional component concentrations, and the flavonoid content of the cheeses were also determined. The addition of fruit liquor did not affect (p> 0.05) the appearance or sensory characteristics of the cheeses. Higher amounts of crude ash, mineral, and flavonoids (psupplemented cheese than in the control cheese. Findings from this study suggest that wine supplemented Gouda could provide additional nutrients while maintaining flavor and quality.

  13. Will the Ban on Liquor Sales To Juveniles Be Effective?

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Retailers are not allowed to sell alcohol to juveniles and signs advertising this must be clearly shown in supermarkets and liquor stores. This is according to Article 19 of the Regulations on Management of Alcohol Circulation, which was put into practice on January 1. The provision marks the second time in 2005 that the tightening up of liquor sales was written into the law. The first occasion was a provision in the Regulations on Retail Sales

  14. Pretreatment of citrus peel press liquor before anaerobic digestion

    Energy Technology Data Exchange (ETDEWEB)

    Lane, A.G.

    1983-02-01

    Centrifugation and aeration were unsuitable pretreatments before anaerobic digestion of press liquors from citrus peel. Non-aerated fermentation without pH control resulted in conversion of sugars to acids and ethyl alcohol with reduction in pH to 2.8 - 3.5. These acidified liquors had a pleasant smell, were stable on storage and were satisfactory feedstock for anaerobic digestion. (Refs. 7).

  15. Determination of the microbial origin of geosmin in Chinese liquor.

    Science.gov (United States)

    Du, Hai; Xu, Yan

    2012-03-01

    Geosmin is the major cause of the common earthy off-flavor in light-aroma type Chinese liquor and, thus, highly detrimental to the aromatic quality. To find out its origin, the evolving process of geosmin in light-aroma type liquor making was monitored, and microbial analysis of Daqu containing geosmin was carried out. The results showed that geosmin appeared in all the fermented sorghums at different fermentation periods. About 57% geosmin in the fermented sorghums was distilled into liquor. During the distillation process, the peak of geosmin concentration appeared when alcohol content was 50-60% vol. More importantly, high geosmin content was observed during the Daqu-making process. Furthermore, five Streptomyces strains were isolated from different types of Daqu used for the fermentation of light-aroma type liquor. All of them produced only geosmin as the main volatile metabolite but no 2-methylisoborneol (2-MIB). It appears that microorganisms developing in Daqu are responsible for the presence of geosmin in liquor. Because of the relatively low detection threshold estimated at 110 ng/L in 46 vol % hydroalcoholic solution, the presence of geosmin in Daqu may pose a risk for Chinese liquor producers.

  16. Vanillin: Synthetic Flavoring from Spent Sulfite Liquor

    Science.gov (United States)

    Hocking, Martin B.

    1997-09-01

    Separation of the lignin component of wood from the cellulose presents an opportunity to access various interesting products from the lignin fragments. The lignin represents availability of a sizable renewable resource. Vanillin, or 3-methoxy-4-hydroxybenzaldehyde, is one of a series of related substituted aromatic flavor constituents, and represents one of the potentially profitable possibilities. Vanillin production from the lignin-containing waste liquor obtained from acid sulfite pulping of wood began in North America in the mid 1930's. By 1981 one plant at Thorold, Ontario produced 60% of the contemporary world supply of vanillin. The process also simultaneously decreased the organic loading of the aqueous waste streams of the pulping process. Today, however, whilst vanillin production from lignin is still practiced in Norway and a few other areas, all North American facilities using this process have closed, primarily for environmental reasons. New North American vanillin plants use petrochemical raw materials. An innovation is needed to help overcome the environmental problems of this process before vanillin production from lignin is likely to resume here. Current interest in the promotion of chemicals production from renewable raw materials reinforces the incentive to do this.

  17. Microbial Community Composition Associated with Maotai Liquor Fermentation.

    Science.gov (United States)

    Wang, Qiang; Zhang, Hongxun; Liu, Xiu

    2016-06-01

    The solid-state fermentation state of Chinese Maotai liquor involves the interaction of several complex microbial communities leading to the generation of the most complex liquor fermentation system in the world and contributes to the unique flavor and aroma of the liquor. In this study, total DNA was extracted from 3 fermented grain samples (FG1, FG2, and FG3) and 12 environmental samples, including Daqu (DA1, DA2, DA3, and DA4), cellar mud (CS1, CS2, and CS3), soil (SL1 and SL2), air (A1 and A2), and sorghum (SH), and the 16S and 18S rRNA genes were amplified. The distribution of typical microorganisms in the samples was analyzed using nested PCR-denaturing gradient gel electrophoresis, while quantitative PCR amplification of 16S rRNA and internal transcribed spacer genes was performed to estimate the microbial abundance present in each sample. The results indicated that Daqu was the primary source of bacteria, followed by the air, soil, and sorghum samples, while the majority of the fungi responsible for Maotai liquor fermentation were from Daqu and sorghum. Highest bacterial concentrations were found in fermented grains, followed by Daqu and sorghum, while the highest fungal concentrations were found in Daqu, followed by sorghum and an air sample from outside the liquor production area. The findings of this study may provide information regarding the mechanisms responsible for flavor development in Maotai liquor, and may be used to further optimize the traditional art of making liquor. PMID:27122124

  18. Resource recovery from black water

    NARCIS (Netherlands)

    Graaff, de M.S.

    2010-01-01

    Zelfs toiletwater is geen afval, maar het is een waardevolle stroom met grondstoffen. Ongeveer de helft van het organisch materiaal, 80% van het stikstof en 70% van het fosfaat van de totale huishoudelijke afvalwaterstroom zit in het toiletwater. Door het gebruik van vacuüm toiletten wordt maar 1 li

  19. Organic acids and inorganic anions in Bayer liquors by ion chromatography after solid-phase extraction

    Institute of Scientific and Technical Information of China (English)

    ZHONG Fu-jin; CHEN Xiao-qing; ZHANG Shu-chao; LI Yue-ping

    2007-01-01

    A method for the simultaneous separation and determination of organic acids and inorganic anions in Bayer liquors was developed by gradient ion chromatography with suppressed conductivity detection. Formate, acetate, propionate, oxalate, succinate,glutarate, fluoride, chloride and sulfate were separated and determined in 33 min. The samples were pretreated with solid-phase extraction, which has high selectivity for removing a large number of metallic ions in the Bayer liquors, and filtered with a 0.45 μm filter membrane before being injected into the ion chromatographic system. The separation of six organic acids and three inorganic anions was achieved on an IonPac AS11-HC column with KOH as the eluent, and the detection was performed by a conductivity detection mode. No interference is found in the presence of fluorate, chlorate and sulphate when organic acids are determined. The calibration graphs of peak area for all the analytes are linear over a wide range. The relative standard derivation of the peak area of analytes is less than 2.14%. Under optimum conditions the detection ranges from 0.2 to 100.0 mg/L. The average recoveries of the added standards are between 94.3% and 102.8%.

  20. Utilisation aspects of ashes and green liquor dregs from an integrated semichemical pulp and board mill

    Energy Technology Data Exchange (ETDEWEB)

    Manskinen, K.

    2013-09-01

    This thesis investigated the properties of bottom and fly ashes originating from a bubbling fluidised bed boiler (120 MW) using two different fuel mixtures (i.e. Fuel mixture A: coal, wood and peat; and B: wood and peat) and of the green liquor dregs originating from the associated semichemical pulp and board mill in relation to the potential utilisation of these residues from various aspects. The total concentrations of As, Cd, Cr, Cu, Ni, Pb, Zn and Hg in the bottom ashes were lower than the maximum allowable concentrations for these elements in forest fertilisers. The total Ca concentrations in bottom ashes A (2.4%; d.w.) and B (3.4%; d.w.) were lower than the legal requirement of 6.0% (d.w.) for ash used as a forest fertiliser. The total Ca concentrations in fly ashes A (6.4%; d.w.) and B (11.0%; d.w.) were higher than the minimum limit value of 6.0% (d.w.), but the concentration of As in fly ashes A (46.9 mg/kg d.w.) and B (41.3 mg/kg; d.w.) exceeded the maximum limit value of 40 mg/kg (d.w.). Only bottom ash B could be used as a forest fertiliser, provided some additional Ca is used. The bottom ashes both fulfilled the Finnish regulations on waste recovery in earth construction. Due to the elevated total concentration of PAH (23 mg/kg; d.w.) and extractable concentrations of Mo (3.9 mg/kg; d.w.) and Se (0.2 mg/kg; d.w.) in fly ash A, this residue cannot be used in covered structures. Due to the elevated concentration of PAH (90 mg/kg; d.w.) in fly ash B, this residue cannot be used in covered and paved structures. However, the utilisation of these residues as an earth construction agent is still possible, but an environmental permit would be required. According to the sequential extraction studies, extractable concentrations of most of the elements in the fly ash A were higher than those in the bottom ash A. The extractability of various elements, both in the bottom and fly ashes A, varied widely. Most of the elements did not occur as readily soluble and

  1. Factors controlling alkali salt deposition in recovery boilers - particle formation and deposition; Soodakattilan likaantuminen ja siihen vaikuttavien tekijoeiden hallinta - hiukkasten muodostuminen ja depositio

    Energy Technology Data Exchange (ETDEWEB)

    Kauppinen, E.I.; Mikkanen, P.; Ylaetalo, S. [VTT Chemistry, Espoo (Finland); Jokiniemi, J.K.; Lyyraenen, J.; Pyykoenen, J.; Saastamoinen, J. [VTT Energy, Espoo (Finland)

    1996-12-01

    In this project, the aim was to find out those critical factors that control the deposit formation in the recovery boilers. We focus on the particle formation, growth and deposition as well as the single black liquor particle combustion behaviour. The final goal is the development of the predictive model to be used to describe deposit growth and subsequent behaviour as well as the dependence of deposition on black liquor characteristics and boiler operation conditions. During year 1995 an experimental study on the aerosol particle formation within the recovery boiler furnace and a sensitivity study with the Aerosol Behaviour in Combustion (ABC) code were carried out. The experimental study confirmed the fact that the particles are already formed in the recovery boiler furnace. The particle formation is initiated in the boundary layer of the burning droplet or smelt bed, where metals are vaporised and oxidised to form tiny seed particles. Trace amounts of metals were measured in all particle sizes and the sensitivity study with the ABC model gave further evidence of the seed formation was necessary primary step in the particle formation. At the furnace outlet the sintration ratio and the sulfation ratio of the particles were dependent on the furnace temperature and the residence time in the furnace. At ESP inlet three types of particles were observed (1) fine particles with the major mass mode at about 1-2 {mu}m, (2) large agglomerates in sizes larger than 8 {mu}m, and (3) spherical particles about 2-4 {mu}m in size. The fine particles were formed from vapours and the large agglomerates were formed from fine particles agglomerated on heat exchanger surfaces and re-entrained back to flue gas flow. The large agglomerates also contain vapours that have directly condensed to surfaces. The large spherical particles contain silicon and pass the process almost unchanged. (Abstract Truncated)

  2. Improved Recovery Boiler Performance Through Control of Combustion, Sulfur, and Alkali Chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Larry L.

    2008-06-09

    This project involved the following objectives: 1. Determine black liquor drying and devolatilization elemental and total mass release rates and yields. 2. Develop a public domain physical/chemical kinetic model of black liquor drop combustion, including new information on drying and devolatilization. 3. Determine mechanisms and rates of sulfur scavenging in recover boilers. 4. Develop non-ideal, public-domain thermochemistry models for alkali salts appropriate for recovery boilers 5. Develop data and a one-dimensional model of a char bed in a recovery boiler. 6. Implement all of the above in comprehensive combustion code and validate effects on boiler performance. 7. Perform gasification modeling in support of INEL and commercial customers. The major accomplishments of this project corresponding to these objectives are as follows: 1. Original data for black liquor and biomass data demonstrate dependencies of particle reactions on particle size, liquor type, gas temperature, and gas composition. A comprehensive particle submodel and corresponding data developed during this project predicts particle drying (including both free and chemisorbed moisture), devolatilization, heterogeneous char oxidation, char-smelt reactions, and smelt oxidation. Data and model predictions agree, without adjustment of parameters, within their respective errors. The work performed under these tasks substantially exceeded the original objectives. 2. A separate model for sulfur scavenging and fume formation in a recovery boiler demonstrated strong dependence on both in-boiler mixing and chemistry. In particular, accurate fume particle size predictions, as determined from both laboratory and field measurements, depend on gas mixing effects in the boilers that lead to substantial particle agglomeration. Sulfur scavenging was quantitatively predicted while particle size required one empirical mixing factor to match data. 3. Condensed-phase thermochemistry algorithms were developed for salt

  3. Plastic Optical Fiber Sensing of Alcohol Concentration in Liquors

    Directory of Open Access Journals (Sweden)

    Masayuki Morisawa

    2012-01-01

    Full Text Available A simple optical fiber sensing system of alcohol concentration in liquors has been studied. In this sensor head, a mixture polymer of novolac resin and polyvinylidenefluoride (PVDF with a ratio of 9 : 1 was coated as a sensitive cladding layer on the plastic fiber core made of polystyrene-(PS-coated polycarbonate (PC. Using this sensor head and a green LED light source, it was confirmed that alcohol concentration in several kinds of liquors from beer to whisky can easily be measured with a fast response time less than 1 minute.

  4. 77 FR 10547 - Kickapoo Traditional Tribe of Texas-First Amended Beer and Liquor Tax Ordinance

    Science.gov (United States)

    2012-02-22

    ... Bureau of Indian Affairs Kickapoo Traditional Tribe of Texas--First Amended Beer and Liquor Tax Ordinance... to the Kickapoo Traditional Tribe of Texas' Beer and Liquor Tax Ordinance. The Ordinance regulates... adopted this amendment to the Kickapoo Traditional Tribe of Texas' Beer and Liquor Tax Ordinance...

  5. Application of Deuterium NMR Analysis for the Differentiation of Korean and Foreign Liquors

    Energy Technology Data Exchange (ETDEWEB)

    Han, G.C.; Lee, S.G. [Korea Research Institute of Chemical Technology, Taejon (Korea)

    2000-02-01

    The {sup 2}H NMR analysis was used to determine the relative deuterium contents at the position of methyl and methylene in ethyl alcohols. Four different liquors manufactured in Korea clearly showed different R values from those of foreign liquors. These R values for the Korean liquors could be used to distinguish a adulteration. (author). 10 refs., 1 tabs., 2 figs.

  6. 76 FR 4366 - Iipay Nation of Santa Ysabel Liquor Control Law

    Science.gov (United States)

    2011-01-25

    ... Bureau of Indian Affairs Iipay Nation of Santa Ysabel Liquor Control Law AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice. SUMMARY: This notice publishes Liquor Control Law No. LB-06-08 of the Iipay Nation of Santa Ysabel (Nation). The Liquor Control Law regulates and controls the possession, sale,...

  7. 77 FR 39731 - Swinomish Indian Tribal Community-Title 15, Chapter 4: Liquor Legalization, Regulation and...

    Science.gov (United States)

    2012-07-05

    ... Bureau of Indian Affairs Swinomish Indian Tribal Community--Title 15, Chapter 4: Liquor Legalization... publishes Title 15, Chapter 4: Liquor Legalization, Regulation and License Code for the Swinomish Indian... adopted Ordinance No. 296, Enacting Swinomish Tribal Code Title 15, Chapter 4: Liquor...

  8. 19 CFR 122.135 - When airline has in-bond liquor storeroom.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false When airline has in-bond liquor storeroom. 122.135...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.135 When airline has in-bond... airline involved has an authorized in-bond liquor storeroom may be removed and restocked in the...

  9. 19 CFR 122.134 - When airline does not have in-bond liquor storeroom.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false When airline does not have in-bond liquor... SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.134 When airline... where the airline involved does not have an authorized in-bond liquor storeroom. When this occurs,...

  10. Recovery of Ammonium Nitrate and Reusable Acetic Acid from Effluent Generated during HMX Production

    Directory of Open Access Journals (Sweden)

    V. D. Raut

    2004-04-01

    Full Text Available Production of HMX on commercial scale is mainly carried out by modified Bachmann process, and acetic acid constitutes major portion of effluenttspent liquor produced during this process. The recovery of glacial acetic acid from this spent liquor is essential to make the process commercially viable besides making it eco-friendly by minimising the quantity of disposable effluent. The recovery of glacial acetic acid from spent liquor is not advisable by simple distillation since it contains, in addition to acetic acid, a small fraction of nitric acid, traces of RDX, HMX, and undesired nitro compounds. The process normally involves neutralising the spent mother liquor with liquor ammonia and then distillating the ueutralised mother liquor under vacuum to recover dilute acetic acid (strength approx. 30 %. The dilute acetic acid, in turn, is concentrated to glacial acetic acid by counter current solvent extraction, followed by distillation. The process is very lengthy and the energy requirement is also veryhigh, rendering the process economically unviable. Hence, a novel method has been developed on bench-scale to obtain glacial acetic acid directly from the mother liquor after the second ageing process.

  11. Recovery of the black-footed ferret: Progress and continuing challenges- Proceedings of the Symposium on the Status of the Black-footed Ferret and Its Habitat, Fort Collins, Colorado, January 28-29, 2004

    Science.gov (United States)

    Roelle, James E.; Miller, Brian J.; Godbey, Jerry L.; Biggins, Dean E.

    2006-01-01

    The black-footed ferret (Mustela nigripes) is a member of the weasel family (Mustelidae) and is closely related to the Siberian polecat (M. eversmannii) of Asian steppes and the European polecat (M. putorius). Compared to its relatives, the black-footed ferret is an extreme specialist, depending on the prairie dogs (Cynomys spp.) of North American grasslands for food and using prairie dog burrows for shelter. The black-footed ferret’s close association with prairie dogs was an important factor in its decline. Prairie dogs were regarded as an agricultural pest as human settlement progressed westward, and they became important hosts for plague as that disease colonized eastward from its sources of introduction on the west coast. Prairie dog numbers were dramatically reduced by poisoning, cropland conversions, and plague during the first half of the 20th century, and black-footed ferret populations declined precipitously. The black-footed ferret was included on the first lists of endangered species, and its status was precarious by the time the Endangered Species Act of 1973 was passed. Its rebound from a low point of 10 known individuals in spring of 1985 (Biggins and others, 2006) is impressive, but the species is not yet “recovered” in either the biological or legal sense (for further details, see Lockhart and others, this volume).

  12. Synthesis of TiO{sub 2} nano-powders prepared from purified sulphate leach liquor of red mud

    Energy Technology Data Exchange (ETDEWEB)

    Tsakiridis, P.E., E-mail: ptsakiri@central.ntua.gr [School of Mining and Metallurgical Engineering, National Technical University of Athens (Greece); Oustadakis, P.; Katsiapi, A.; Perraki, M.; Agatzini-Leonardou, S. [School of Mining and Metallurgical Engineering, National Technical University of Athens (Greece)

    2011-10-30

    Highlights: {yields} Ti can be recovered from red mud leach liquor by 40% Cyanex 272 in toluene. {yields} 3 stages are required for Ti extraction at pH = 0.3, T = 25 {sup o}C and A/O = 1.5. {yields} Ti can be stripped from loaded Cyanex 272 with diluted HCl at 25 {sup o}C. {yields} TiO{sub 2} is precipitated as anatase at pH = 6 and T = 95 {sup o}C, using MgO pulp. {yields} Fe in the precipitate did not exceed 0.3%, whereas no Al was detected. - Abstract: The research work presented in this paper is focused on the development of a purification process of red mud sulphate leach liquor for the recovery of titanium oxide (TiO{sub 2}) nano-powders in the form of anatase. Initially, titanium was extracted over iron and aluminium from the leach liquor by solvent extraction using Cyanex 272 in toluene, at pH: 0.3 and T: 25 {sup o}C, with 40% extractant concentration. Stripping of the loaded, with titanium, organic phase was carried out by diluted HCl (3 mol/L) at ambient temperature. Finally, the recovery of titanium nano-powder, in the form of anatase, was performed by chemical precipitation at pH: 6 and T: 95 {sup o}C, using 10 wt% MgO pulp as neutralizing agent. The produced precipitates were characterized by X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric/differential thermal analysis (TGA/DTA). Their morphological characteristics and microstructure were studied by scanning electron microscopy (SEM). High grade titanium white precipitate, in the form of anatase, was obtained. Iron concentration in the precipitate did not exceed 0.3%, whereas no aluminium was detected.

  13. Penentuan Konsentrasi Total Alkali Aktif dan Sulfiditas dalam White Liquor pada Proses Recausticizing PT. Toba Pulp Lestari, Tbk Porsea

    OpenAIRE

    Juliani, Eva

    2015-01-01

    White Liquor is liquor which is derived from green liquor with CaO (burnt lime), by recaustisizing process in caustisizer. This white liquor will use as wood cooking in digester unit. Before white liquor used, require to control the quality of white liquor. Parameter which analysis in white liquor is total active alkali (TAA), and Sulfidity (%). Total goals of active alkali wanted is 95 g/l- 110 g/l,white goals of sulfidity is 20 %-29%. From this perception have result that total active alkal...

  14. Acetate favors more phosphorus accumulation into aerobic granular sludge than propionate during the treatment of synthetic fermentation liquor.

    Science.gov (United States)

    Cai, Wei; Huang, Wenli; Li, Huifang; Sun, Beina; Xiao, Huasheng; Zhang, Zhenya; Lei, Zhongfang

    2016-08-01

    Anaerobic digestion (AD) is an efficient biotechnology widely applied for energy and resource recovery from organic waste and wastewater treatment. The effluent from AD or fermentation liquor containing organic substances like volatile fatty acids (VFAs) and mineral nutrients (such as N and P), however, will trigger serious environmental issues if not properly dealt with. In this study two identical sequencing batch reactors (SBRs), namely Ra and Rp were used to cultivate aerobic granules for P recovery from synthetic fermentation liquor, respectively using acetate and propionate as additional carbon source. Larger and more stable granules were achieved in Ra with higher P removal capability (9.4mgP/g-VSS·d) and higher anaerobic P release (6.9mgP/g-VSS·h). In addition to much higher P content (78mgP/g-SS), bioavailable P in Ra-granules increased to 45mgP/g-SS, approximately 2-times those of seed sludge and Rp-granules. Microbial community analysis indicated that more GAOs were accumulated in Rp-granules. PMID:27183235

  15. Reuse of Anode Slime Generated by the Zinc Industry to Obtain a Liquor for Manufacturing Electrolytic Manganese

    Science.gov (United States)

    Ayala, J.; Fernández, B.

    2013-08-01

    A hydrometallurgical process is proposed in this article to recover manganese from a zinc electrowinning residue. The article describes the digestion-leaching experiments, precipitation, and electrowinning assays to recover Mn from this residue. Anode slime is treated with sulfuric acidic in a furnace within a temperature range of 400-450°C, leached with water, and then filtered. The results show that the dissolution of manganese increases with increasing temperature in the digestion step. The recovery yield of manganese was higher than 90%. As manganese electrolysis requires an electrolyte free of Zn, Ni, Co, and Cu pollutants, the sulfuric acid liquor needs a purification step. Na2S is used to remove pollutants. The results obtained in this study have shown that the proposed process for the recovery of manganese from this type of residue is technically viable.

  16. Utilization of maltose enriched spent grains liquor for xanthan production

    OpenAIRE

    Dodić Jelena M.; Vučurović Damjan G.; Grahovac Jovana A.; Dodić Siniša N.; Popov Stevan D.; Jokić Aleksandar I.

    2011-01-01

    The present study examines xanthan production by Xanthomonas campestris under aerobic conditions on spent grains liquor based cultivation media containing four different amounts of maltose. All four experiments were performed simultaneously, so that all stages of the biotechnological process would be carried out under identical conditions. In addition to the cultivation parameters (pH value, contents of dissolved oxygen, reducing sugars and assimilable nitrogen, turbidity and trickling ...

  17. HIGHLY ENERGY EFFICIENT D-GLU (DIRECTED-GREEN LIQ-UOR UTILIZATION) PULPING

    Energy Technology Data Exchange (ETDEWEB)

    Lucia, Lucian A

    2013-04-19

    Purpose: The purpose of the project was to retrofit the front end (pulp house) of a commercial kraft pulping mill to accommodate a mill green liquor (GL) impregna-tion/soak/exposure and accrue downstream physical and chemical benefits while prin-cipally reducing the energy footprint of the mill. A major player in the mill contrib-uting to excessive energy costs is the lime kiln. The project was intended to offload the energy (oil or natural gas) demands of the kiln by by-passing the causticization/slaking site in the recovery area and directly using green liquor as a pulping medium for wood. Scope: The project was run in two distinct, yet mutually compatible, phases: Phase 1 was the pre-commercial or laboratory phase in which NC State University and the Insti-tute of Paper Science and Technology (at the Georgia Institute of Technology) ran the pulping and associated experiments, while Phase 2 was the mill scale trial. The first tri-al was run at the now defunct Evergreen Pulp Mill in Samoa, CA and lead to a partial retrofit of the mill that was not completed because it went bankrupt and the work was no longer the low-hanging fruit on the tree for the new management. The second trial was run at the MeadWestvaco Pulp Mill in Evedale, TX which for all intents and pur-poses was a success. They were able to fully retrofit the mill, ran the trial, studied the pulp properties, and gave us conclusions.

  18. Recovery of pure ZnO nanoparticles from spent Zn-MnO₂ alkaline batteries.

    Science.gov (United States)

    Deep, Akash; Kumar, Kamal; Kumar, Parveen; Kumar, Pawan; Sharma, Amit L; Gupta, Bina; Bharadwaj, Lalit M

    2011-12-15

    The recovery of pure ZnO (zinc oxide) nanoparticles from spent Zn-Mn dry alkaline batteries is reported. Spent batteries were dismantled to separate the contained valuable metals of the cell electrodes in the form of black powder. Treatment of this black powder with 5 mol L(-1) HCl produced leach liquor, primarily containing 2.90 g L(-1) Zn and 2.02 g L(-1) Mn. Selective and quantitative liquid-liquid extraction of Zn(II) was then carried out in three counter current steps by using Cyanex 923 (0.10 mol L(-1) in n-hexane). Zn(II) distributed in the organic phase as complex ZnCl(2)·2R (R = Cyanex 923 molecule). The metal loaded organic phase was subjected to combust at 600 °C to yield pure ZnO nanoparticles (40-50 nm). Important characteristics of the synthesized nanoparticles were investigated by field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction spectroscopy (XRD), and atomic force microscopy (AFM).

  19. Fermentation to ethanol of pentose-containing spent sulphite liquor

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.; Wayman, M.; Parekh, S.K.

    1987-06-01

    Ethanolic fermentation of spent sulphite liquor with ordinary bakers' yeast is incomplete because this yeast cannot ferment the pentose sugars in the liquor. This results in poor alcohol yields, and a residual effluent problem. By using the yeast Candida shehatae (R) for fermentation of the spent sulphite liquor from a large Canadian alcohol-producing sulphite pulp and paper mill, pentoses as well as hexoses were fermented nearly completely, alcohol yields were raised by 33%, and sugar removal increased by 46%. Inhibitors were removed prior to fermentation by steam stripping. Major benefits were obtained by careful recycling of this yeast, which was shown to be tolerant both of high sugar concentrations and high alcohol concentrations. When sugar concentrations over 250 g/L (glucose:xylose 70:30) were fermented, ethanol became an inhibitor when its concentration reached 90 g/L. However, when the ethanol was removed by low-temperature vacuum distillation, fermentation continued and resulted in a yield of 0.50 g ethanol/g sugar consumed. Further improvement was achieved by combining enzyme saccharification of sugar oligomers with fermentation. This yeast is able to ferment both hexoses and pentoses simultaneously, efficiently, and rapidly. Present indications are that it is well suited to industrial operations wherever hexoses and pentoses are both to be fermented to ethanol, for example, in wood hydrolysates. (Refs. 6).

  20. Fermentation to ethanol of pentose-containing spent sulfite liquor

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.; Wayman, M.; Parekh, S.K.

    1987-01-01

    Ethanolic fermentation of spent sulfite liquor with ordinary bakers' yeast is incomplete because of this yeast cannot ferment the pentose sugars in the liquor. This results in poor alcohol yields, and a residual effluent problem. By using the yeast Candida shehatae (R) for fermentation of the spent sulfite liquor from a large Canadian alcohol-producing sulfite pulp and paper mill, pentoses as well as hexoses were fermented nearly completely, alcohol yields were raised by 33%, and sugar removal increased by 46%. Inhibitors were removed prior to fermentation by steam stripping. Major benefits were obtained by careful recycling of this yeast, which was shown to be tolerant both of high sugar concentrations and high alcohol concentrations. When sugar concentrations over 250 g/L (glucose:xylose 70:30) were fermented, ethanol became an inhibitor when its concentration reached over 90 g/L. However, when the ethanol was removed by low-temperature vacuum distillation, fermentation continued and resulted in a yield of 0.50 g ethanol/g sugar consumed. Further improvement was achieved by combining enzyme saccharification of sugar oligomers with fermentation. This yeast is able to ferment both hexoses and pentoses simultaneously, efficiently, and rapidly.

  1. Alberta's and Ontario's liquor boards: why such divergent outcomes?

    Science.gov (United States)

    Bird, Malcolm G

    2010-01-01

    The provinces of Alberta and Ontario have chosen very different methods to distribute alcoholic beverages: Alberta privatized the Alberta Liquor Control Board (ALCB) in 1993 and established a private market to sell beverage alcohol, while Ontario, in stark contrast, opted to retain and expand the Liquor Control Board of Ontario (LCBO). This article examines the reasons for the divergent policy choices made by Ralph Klein and Mike Harris' Conservative governments in each province. The article draws on John Kingdon's “multiple streams decision-making model,” to examine the mindsets of the key decision-makers, as well as “historical institutionalism,” to organize the pertinent structural, historical and institutional variables that shaped the milieu in which decision-makers acted. Unique, province-specific political cultures, histories, institutional configurations (including the relative influence of a number of powerful actors), as well as the fact that the two liquor control boards were on opposing trajectories towards their ultimate fates, help to explain the different decisions made by each government. Endogenous preference construction in this sector, furthermore, implies that each system is able to satisfy all relevant stakeholders, including consumers.

  2. PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

    Directory of Open Access Journals (Sweden)

    Carolina M. Furtado

    2015-09-01

    Full Text Available Acacia mearnsii de Wild (black wattle is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with mass spectrometry (GC/MS. Branches of black wattle were thermally degraded at controlled ambient and temperature conditions. Overall, a higher variety of compounds were obtained under atmospheric air pressure than under synthetic air pressure. Most of the tentatively identified compounds, such as carboxylic acids, phenols, aldehydes, and low molecular mass lignin fragments, such as guayacol, syringol, and eugenol, were products of lignin thermoconversion. Substituted aromatic compounds, such as vanillin, ethyl vanillin, and 2-methoxy-4-propeny-phenol, were also identified. At temperatures above 200 ºC, furan, 2-acetylfuran, methyl-2-furoate, and furfural, amongst others, were identified as polysaccharide derivatives from cellulose and hemicellulose depolymerization. This study evidences the need for adequate management of the condensable by-products of charcoal production, both for economic reasons and for controlling their potential environmental impact.

  3. Compare the Determination of Vitamin C in Momordica Charantia Liquor%苦瓜酒中维生素C测定方法的比较

    Institute of Scientific and Technical Information of China (English)

    张海珠; 周萍; 杨云川; 陈艳兰

    2014-01-01

    Using ultraviolet spectrophotometry (UV) and high performance liquid chromatography (HPLC) to determine the content of vitamin C in Momordica charantia liquor. Experimental results showed that the two kinds of methods were simple and rapid, but the recovery rate was smaller in UV method, HPLC method was suitable for determine vitamin C in Momordica charantia liquor.%采用紫外分光光度法(UV法)及高效液相色谱法(HPLC法)测定苦瓜酒中维生素C的含量。试验结果表明两种方法操作均简便、快速,但UV法的回收率偏小,HPLC法的回收率较高,结果准确,数据可靠,适用于苦瓜酒中维生素C的含量测定。

  4. Final Report, Materials for Industrial Heat Recovery Systems, Tasks 3 and 4 Materials for Heat Recovery in Recovery Boilers

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, James R.; Kish, Joseph R.; Singh, Preet M.; Sarma, Gorti B.; Yuan, Jerry; Gorog, J. Peter; Frederick, Laurie A.; Jette, Francois R.; Meisner, Roberta A.; Singbeil, Douglas L.

    2007-12-31

    The DOE-funded project on materials for industrial heat recovery systems included four research tasks: materials for aluminum melting furnace recuperator tubes, materials and operational changes to prevent cracking and corrosion of the co-extruded tubes that form primary air ports in black liquor recovery boilers, the cause of and means to prevent corrosion of carbon steel tubes in the mid-furnace area of recovery boilers, and materials and operational changes to prevent corrosion and cracking of recovery boiler superheater tubes. Results from studies on the latter two topics are given in this report while separate reports on results for the first two tasks have already been published. Accelerated, localized corrosion has been observed in the mid-furnace area of kraft recovery boilers. This corrosion of the carbon steel waterwall tubes is typically observed in the vicinity of the upper level of air ports where the stainless clad co-extruded wall tubes used in the lower portion of the boiler are welded to the carbon steel tubes that extend from this transition point or “cut line” to the top of the boiler. Corrosion patterns generally vary from one boiler to another depending on boiler design and operating parameters, but the corrosion is almost always found within a few meters of the cut line and often much closer than that. This localized corrosion results in tube wall thinning that can reach the level where the integrity of the tube is at risk. Collection and analysis of gas samples from various areas near the waterwall surface showed reducing and sulfidizing gases were present in the areas where corrosion was accelerated. However, collection of samples from the same areas at intervals over a two year period showed the gaseous environment in the mid-furnace section can cycle between oxidizing and reducing conditions. These fluctuations are thought to be due to gas flow instabilities and they result in an unstable or a less protective scale on the carbon steel

  5. Fermentation assisted byproduct recovery in the palm oil industry

    Energy Technology Data Exchange (ETDEWEB)

    Stanton, W.R.

    1983-05-01

    The production of palm oil from Elaeis guineensis is a leading natural product industry in Malaysia, giving rise to a number of residues, including a rich, fruity liquor from the pulp. The liquor, of which 7-10 million tonnes a year are currently produced, has some 6% organic solids, including 0.7-1.0% or more of oil which physical processing has failed to extract. Present anaerobic digestion processes exploit only the energy and fertiliser value. Methods are described in this paper for thermophilic, microbially assisted digestion for component separation and recovery, exploiting the widely used techniques for fruit juice extraction involving enzymic breakdown of starch, pectin and other cell components. Anaerobiosis and acidogenesis help protect and release residual oil, concomitantly preserving the solids against rancidity and spoilage by ensilage. The separated wet solids are nutritive (17% protein on dry matter), biologically safe and attractive to livestock. Downstream use of the liquor is aided by the thermophilic digestion. (Refs. 33).

  6. A novel method to prepare L-Arabinose from xylose mother liquor by yeast-mediated biopurification

    Directory of Open Access Journals (Sweden)

    Lin Shuangjun

    2011-06-01

    Full Text Available Abstract Background L-arabinose is an important intermediate for anti-virus drug synthesis and has also been used in food additives for diets-controlling in recent years. Commercial production of L-arabinose is a complex progress consisting of acid hydrolysis of gum arabic, followed by multiple procedures of purification, thus making high production cost. Therefore, there is a biotechnological and commercial interest in the development of new cost-effective and high-performance methods for obtaining high purity grade L-arabinose. Results An alternative, economical method for purifying L-arabinose from xylose mother liquor was developed in this study. After screening 306 yeast strains, a strain of Pichia anomala Y161 was selected as it could effectively metabolize other sugars but not L-arabinose. Fermentation in a medium containing xylose mother liquor permitted enrichment of L-arabinose by a significant depletion of other sugars. Biochemical analysis of this yeast strain confirmed that its poor capacity for utilizing L-arabinose was due to low activities of the enzymes required for the metabolism of this sugar. Response surface methodology was employed for optimization the fermentation conditions in shake flask cultures. The optimum conditions were: 75 h fermentation time, at 32.5°C, in a medium containing 21% (v/v xylose mother liquor. Under these conditions, the highest purity of L-arabinose reached was 86.1% of total sugar, facilitating recovery of white crystalline L-arabinose from the fermentation medium by simple methods. Conclusion Yeast-mediated biopurification provides a dynamic method to prepare high purity of L-arabinose from the feedstock solution xylose mother liqour, with cost-effective and high-performance properties.

  7. Generation of PHB from Spent Sulfite Liquor Using Halophilic Microorganisms

    Science.gov (United States)

    Weissgram, Michaela; Gstöttner, Janina; Lorantfy, Bettina; Tenhaken, Raimund; Herwig, Christoph; Weber, Hedda K.

    2015-01-01

    Halophilic microorganisms thrive at elevated concentrations of sodium chloride up to saturation and are capable of growing on a wide variety of carbon sources like various organic acids, hexose and also pentose sugars. Hence, the biotechnological application of these microorganisms can cover many aspects, such as the treatment of hypersaline waste streams of different origin. Due to the fact that the high osmotic pressure of hypersaline environments reduces the risk of contamination, the capacity for cost-effective non-sterile cultivation can make extreme halophilic microorganisms potentially valuable organisms for biotechnological applications. In this contribution, the stepwise use of screening approaches, employing design of experiment (DoE) on model media and subsequently using industrial waste as substrate have been implemented to investigate the applicability of halophiles to generate PHB from the industrial waste stream spent sulfite liquor (SSL). The production of PHB on model media as well as dilutions of industrial substrate in a complex medium has been screened for by fluorescence microscopy using Nile Blue staining. Screening was used to investigate the ability of halophilic microorganisms to withstand the inhibiting substances of the waste stream without negatively affecting PHB production. It could be shown that neither single inhibiting substances nor a mixture thereof inhibited growth in the investigated range, hence, leaving the question on the inhibiting mechanisms open. However, it could be demonstrated that some haloarchaea and halophilic bacteria are able to produce PHB when cultivated on 3.3% w/w dry matter spent sulfite liquor, whereas H. halophila was even able to thrive on 6.6% w/w dry matter spent sulfite liquor and still produce PHB. PMID:27682089

  8. Generation of PHB from Spent Sulfite Liquor Using Halophilic Microorganisms

    Directory of Open Access Journals (Sweden)

    Michaela Weissgram

    2015-06-01

    Full Text Available Halophilic microorganisms thrive at elevated concentrations of sodium chloride up to saturation and are capable of growing on a wide variety of carbon sources like various organic acids, hexose and also pentose sugars. Hence, the biotechnological application of these microorganisms can cover many aspects, such as the treatment of hypersaline waste streams of different origin. Due to the fact that the high osmotic pressure of hypersaline environments reduces the risk of contamination, the capacity for cost-effective non-sterile cultivation can make extreme halophilic microorganisms potentially valuable organisms for biotechnological applications. In this contribution, the stepwise use of screening approaches, employing design of experiment (DoE on model media and subsequently using industrial waste as substrate have been implemented to investigate the applicability of halophiles to generate PHB from the industrial waste stream spent sulfite liquor (SSL. The production of PHB on model media as well as dilutions of industrial substrate in a complex medium has been screened for by fluorescence microscopy using Nile Blue staining. Screening was used to investigate the ability of halophilic microorganisms to withstand the inhibiting substances of the waste stream without negatively affecting PHB production. It could be shown that neither single inhibiting substances nor a mixture thereof inhibited growth in the investigated range, hence, leaving the question on the inhibiting mechanisms open. However, it could be demonstrated that some haloarchaea and halophilic bacteria are able to produce PHB when cultivated on 3.3% w/w dry matter spent sulfite liquor, whereas H. halophila was even able to thrive on 6.6% w/w dry matter spent sulfite liquor and still produce PHB.

  9. Removal of vat and disperse dyes from residual pad liquors

    OpenAIRE

    Golob, Vera; Ojstršek, Alenka

    2012-01-01

    The efficiency of three wastewater treatment techniques, coagulation/flocculation, adsorption and ultrafiltration, has been studied for the removal of vat and disperse dyes from residual pad liquors. Three inorganic coagulants Al2(SO4)3 18H2O, FeSO4 7H2O, FeCl3 6H2O and commercial cationic flocculant, as individuals and in combination, were tested for the coagulation/flocculation methods. Granular activated carbon was used as an adsorbent in the adsorption technique. Ultrafiltration was perfo...

  10. Energy efficiency improvement of a Kraft process through practical stack gases heat recovery

    International Nuclear Information System (INIS)

    A process scheme for the optimal recovery of heat from stack gases considering energy and technical constraints has been developed and applied to an existing Kraft pulping mill. A system based on a closed loop recirculation of hot oil is used to recover the heat from stack gases and distribute it to the appropriate cold streams. The recovery of heat from stack gases is part of an overall optimization of the Kraft mill. Tools such as Pinch Analysis and exergy analysis are used to evaluate the process streams. The results indicate that 10.8 MW of heat from stack gases can be reused to heat process streams such as the deaerator water, hot water, drying filtrates, and black liquor. A simulation model of the recirculation loop has been developed to determine the specifications of the recovery system. The total heat exchanger surface area required by the system is 3460 m2, with a hot oil recirculation temperature of 137 oC. The anticipated total investment is $10.3 M, with a payback time of 1.8 years. - Highlights: → We developed a process design for recovering heat from stack gases in a Kraft mill. → The recovered heat is optimally distributed to the process cold streams. → Heat recovery system has a total surface area of 3500 m2 without gases condensation. → A reduction of 7 percent in total process steam demand is anticipated. → A total investment of 10.3 M$ is needed with a payback time of less than two years

  11. Male Readership Differences in Liquor Magazine Ads Employing Nonsensical and Sexual Humor.

    Science.gov (United States)

    Reid, Leonard N.; And Others

    A study examined the attention getting value of nonsensical and sexual humor used in liquor advertisements to determine if one was more effective than the other in attracting male magazine readers. Thirty-two Starch-scored liquor ads taken from 1976 and 1977 issues of "Time,""Newsweek," and "Sports Illustrated" were analyzed by three male readers.…

  12. 19 CFR 11.6 - Distilled spirits, wines, and malt liquors in bulk.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Distilled spirits, wines, and malt liquors in bulk...; DEPARTMENT OF THE TREASURY PACKING AND STAMPING; MARKING Packing and Stamping § 11.6 Distilled spirits, wines... conveying imported distilled spirits, wines, and malt liquors, in accordance with 19 U.S.C. 467. (b)...

  13. Discrimination between authentic and adulterated liquors by near-infrared spectroscopy and ensemble classification

    Science.gov (United States)

    Chen, Hui; Tan, Chao; Wu, Tong; Wang, Li; Zhu, Wanping

    2014-09-01

    Chinese liquor is one of the famous distilled spirits and counterfeit liquor is becoming a serious problem in the market. Especially, age liquor is facing the crisis of confidence because it is difficult for consumer to identify the marked age, which prompts unscrupulous traders to pose off low-grade liquors as high-grade liquors. An ideal method for authenticity confirmation of liquors should be non-invasive, non-destructive and timely. The combination of near-infrared spectroscopy with chemometrics proves to be a good way to reach these premises. A new strategy is proposed for classification and verification of the adulteration of liquors by using NIR spectroscopy and chemometric classification, i.e., ensemble support vector machines (SVM). Three measures, i.e., accuracy, sensitivity and specificity were used for performance evaluation. The results confirmed that the strategy can serve as a screening tool applied to verify adulteration of the liquor, that is, a prior step used to condition the sample to a deeper analysis only when a positive result for adulteration is obtained by the proposed methodology.

  14. Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.

  15. Feasibility of disposing waste glyphosate neutralization liquor with cement rotary kiln

    International Nuclear Information System (INIS)

    Highlights: • The waste neutralization liquor was injected directly into the kiln system. • No obvious effect on the quality of cement clinker. • The disposing method was a zero-discharge process. • The waste liquor can be used as an alternative fuel to reduce the coal consumption. - Abstract: The waste neutralization liquor generated during the glyphosate production using glycine-dimethylphosphit process is a severe pollution problem due to its high salinity and organic components. The cement rotary kiln was proposed as a zero discharge strategy of disposal. In this work, the waste liquor was calcinated and the mineralogical phases of residue were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The mineralogical phases and the strength of cement clinker were characterized to evaluate the influence to the products. The burnability of cement raw meal added with waste liquor and the calorific value of waste liquor were tested to evaluate the influence to the thermal state of the kiln system. The results showed that after the addition of this liquor, the differences of the main phases and the strength of cement clinker were negligible, the burnability of raw meal was improved; and the calorific value of this liquor was 6140 J/g, which made it could be considered as an alternative fuel during the actual production

  16. 77 FR 74025 - Federated Indians of Graton Rancheria-Liquor Control Statute

    Science.gov (United States)

    2012-12-12

    ... process used for its production. (b) Alcoholic beverage means all alcohol, spirits, liquor, wine, beer and any liquid or solid containing alcohol, spirits, liquor, wine, or beer, and which contains one-half of... of Alcohol. The manufacture of beer and wine shall be lawful within Lands under the Jurisdiction...

  17. Feasibility of disposing waste glyphosate neutralization liquor with cement rotary kiln

    Energy Technology Data Exchange (ETDEWEB)

    Bai, Y.; Bao, Y.B.; Cai, X.L.; Chen, C.H. [College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009 (China); State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009 (China); Ye, X.C., E-mail: yexuchu@njtech.edu.cn [College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009 (China); State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009 (China)

    2014-08-15

    Highlights: • The waste neutralization liquor was injected directly into the kiln system. • No obvious effect on the quality of cement clinker. • The disposing method was a zero-discharge process. • The waste liquor can be used as an alternative fuel to reduce the coal consumption. - Abstract: The waste neutralization liquor generated during the glyphosate production using glycine-dimethylphosphit process is a severe pollution problem due to its high salinity and organic components. The cement rotary kiln was proposed as a zero discharge strategy of disposal. In this work, the waste liquor was calcinated and the mineralogical phases of residue were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The mineralogical phases and the strength of cement clinker were characterized to evaluate the influence to the products. The burnability of cement raw meal added with waste liquor and the calorific value of waste liquor were tested to evaluate the influence to the thermal state of the kiln system. The results showed that after the addition of this liquor, the differences of the main phases and the strength of cement clinker were negligible, the burnability of raw meal was improved; and the calorific value of this liquor was 6140 J/g, which made it could be considered as an alternative fuel during the actual production.

  18. De kristallisatie-methode bij het onderzoek van de liquor cerebro-spinalis

    NARCIS (Netherlands)

    Wittermans, Aafko Willinge

    1941-01-01

    Ongeveer twaalfhonderd liquores zijn volgens een in de kliniek nog weinig bekende zeer eenvoudige methode van onderzoek van den Roemeenschen Hoogleraar TOMESCO onderzocht. Deze methode berust op het beoordeelen van het kristalbeeld dat ontstaat bij het indampen van druppels sterk verdunde liquor cer

  19. Removal of peel oil from citrus peel press liquors before anaerobic digestion

    Energy Technology Data Exchange (ETDEWEB)

    Lane, A.G.

    1983-02-01

    Aeration of the press liquors from citrus peel for periods up to 9 days permitted growth of limonene-degrading and other microorganisms present in the liquors. Reduction in oil levels to 0.01% (w/v) occurred within 6-8 hours, due to evaporation or stripping of the oil, rather than to microbial degradation. (Refs. 5).

  20. 27 CFR 31.61 - Single sale of liquors or warehouse receipts.

    Science.gov (United States)

    2010-04-01

    ... warehouse receipts. 31.61 Section 31.61 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Persons Who Are Not Dealers in Liquors Or Beer § 31.61 Single sale of liquors or warehouse receipts. A single sale of distilled spirits, wines, or beer, or a single sale of one or more warehouse receipts...

  1. [Identification of Kweichow Moutai liquor by gas chromatography-mass spectrometry fingerprint].

    Science.gov (United States)

    Sun, Qiran; Xiang, Ping; Shen, Baohua; Shen, Min

    2010-09-01

    The fingerprint of Kweichow Moutai liquor was established by gas chromatography-mass spectrometry (GC-MS) and the similarity of fingerprints was evaluated by the fingerprint similarity calculation software designed by Zhejiang University based on included angle cosine. One milliliter of liquor sample was mixed with ten microliter of 2% n-pentyl acetate solution used as internal standard. One microliter of the prepared sample was injected into a GC-MS. The separation was performed on an HP-INNOWAX 19091N-113 capillary column. The precision and repeatability of the method were good as the relative standard deviation (RSD) of intrabatch was less than 5%. A total of 35 characteristic components of Kweichow Moutai liquor were identified. The fingerprints of 38 batches of Kweichow Moutai, 5 Moutai-flavor liquors produced by Kweichow Moutai Company Limited, the same manufacturer as Kweichow Moutai, and 12 other brand liquors were compared in characteristic components and similarity. The results demonstrated that different batches of Kweichow Moutai had good similarity (> or = 0.9), and Kweichow Moutai was differentiated from the liquors of different alcohol contents and flavors, but it was poorly distinguished from the Moutai-flavor liquors by fingerprint similarity calculation software. Therefore, only in combining characteristic components and fingerprint similarity results, Kweichow Moutai can be distinguished from other liquors. The established method offers technical basis for the identification of Kweichow Moutai. PMID:21171278

  2. A prospective clinical study of feto-maternal outcome in pregnancies with abnormal liquor volume

    Directory of Open Access Journals (Sweden)

    Rutwa J. Chavda

    2014-02-01

    Conclusions: A good clinical examination can pick up most subjects of abnormal liquor volume. Abnormal liquor volumes are associated with increased maternal morbidity and adverse perinatal outcome. [Int J Reprod Contracept Obstet Gynecol 2014; 3(1.000: 181-184

  3. 27 CFR 31.163 - Requirements when a wholesale dealer in liquors maintains a retail department.

    Science.gov (United States)

    2010-04-01

    ... wholesale dealer in liquors maintains a retail department. 31.163 Section 31.163 Alcohol, Tobacco Products... wholesale dealer in liquors maintains a retail department. (a) Constructive receipt and sale. When a... spirits, and the retail sales of distilled spirits normally represent 90 percent or more of the volume...

  4. Marketing Booze to Blacks. A Report from the Center for Science in the Public Interest.

    Science.gov (United States)

    Hacker, George A.; And Others

    Beer, wine, and liquor manufacturers aggressively seek to maximize sales of their products to blacks, despite public health and safety problems associated with those products. Rather than act to protect the public from the over-promotion of alcohol, government has set few effective constraints on the sales stratagems of alcoholic beverage…

  5. THE LIGNIN CONTENT IN BLACK LIQUID OF STRAW AS-AQ BY ULTRAVIOLET SPECTROPHOTOMETER

    Institute of Scientific and Technical Information of China (English)

    HaiqiangShi; BingyueLiu; XingqiangLi; LongquanXu; BeihaiHe

    2004-01-01

    The measurement of lignin content in black liquid of straw AS-AQ by ultraviolet spectrophotometer (UV) is discussed in this paper. Different dilution multiple and contrast solutions have an effect on the measured results of the lignin content by UV. The calculation method for the absorption coefficient and thes canning spectrum property of liquor acidified by SO are introduced in this paper.

  6. Kinetics and compensation effects during steam gasification of Fujian anthracite using viscose liquor as catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Lin Ju; Zhang Ji-yu; Zhong Xue-qing [Fuzhou University, Fuzhou (China). Institute of Chemical Engineering and Technology

    2009-08-15

    Catalytic steam gasification kinetics of Fujian Youxi anthracite using viscose liquor as catalyst was investigated in an isothermal thermo-gravimetric analyzer under ambient pressure. Coal conversions versus reaction time with different viscose liquor concentrations (0-12% NaOH) were measured at the temperature range from 850 to 950{sup o}C. The research shows that the viscose liquor can greatly improve the gasification rate and carbon conversion. The Loading Saturation Level (LSL) of the viscose liquor within the experimental conditions was also determined. The catalytic steam gasification reaction can be well fitted by a shrinking-core model (SCM) and the reaction rate constants are obtained. The kinetic analysis indicates that the catalytic gasification exhibits a prominent compensation effect between the activation energy and the pre-exponential factor. The kinetic equation including the compensation effects for the catalytic steam gasification of Fujian Youxi anthracite using viscose liquor as catalyst is presented. 23 refs., 7 figs., 3 tabs.

  7. Analysis of submerged membrane for a sludge-bed anaerobic membrane bioreactor treating prehydrolysis liquor.

    Science.gov (United States)

    Kale, Mayur Milan; Singh, Kripa Shankar

    2016-08-01

    An analysis of foulants and the performance of membranes in innovative sludge-bed anaerobic membrane bioreactors (SB-AnMBRs) were evaluated at mesophilic (35°C for approx. 400 days) followed by thermophilic (55°C for approx. 400 days) temperatures while treating the prehydrolysis liquor (PHL) waste stream from a dissolving pulp production plant. The membrane fouling of SB-AnMBR was analyzed for 0.1, 0.15 and 0.2 m(3)/m(2)/d flux conditions. Physico-chemical analyses of the membrane showed that the combination of 5% citric acid, 0.5% NaOCl and 2% NaOH solutions was effective in achieving more than 80% recovery of membrane flux. Chemical characterization of foulants showed that proteins were more predominant in membrane fouling than carbohydrates. Sugars and lignin contribution were negligible as compared to proteins in the total organic carbon content of the foulant. Membrane fouling occurred through a biofilm-dominated process and organic fouling. Combination of cleaning chemicals which included 0.5% NaClO and 2% NaOH solutions was most effective in the removal of the organic foulants. SEM analysis showed the pictorial evolution of the impact of fouling on the pore openings and the effect of cleaning on the membrane surface. PMID:26708166

  8. Characterization of geosmin as source of earthy odor in different aroma type Chinese liquors.

    Science.gov (United States)

    Du, Hai; Fan, Wenlai; Xu, Yan

    2011-08-10

    Earthy odor is one of the most frequent and serious causes for the aroma deterioration in Chinese liquor, which causes a dirty and dusty impression. The odor in Chinese liquor is similar to that of rice husk, one kind of auxiliary material widely used as a filler in the distillation process. So it is experientially hypothesized that such odor may derive from rice husk. In this paper, the gas chromatography-olfactometry (GC-O) technique and gas chromatography-mass spectrometry (GC-MS) were used to discover and identify the characteristic odoriferous zone of Chinese liquor marked by earthy odor. Geosmin was found to be responsible for this odor. The levels of the compound in ten bottled liquors and thirty liquors aging for different years belonging to four different aroma types were determined by the optimized headspace-solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) method. Quantitative analysis of bottled liquor revealed the presence of geosmin in all aroma type liquors with concentrations ranging from 1.10 μg/L to 9.90 μg/L, except for strong-aroma type liquor. Meanwhile in the aged liquors belonging to the same aroma type, geosmin was detected with significant concentrations and high odor activity values (OAVs) during different years of aging. However, geosmin was not detected in steamed rice husk nor in nonsteamed rice husk, which suggests that rice husk is not the origin of earthy odor in Chinese liquor, and there may be another origin of it during the brewing process.

  9. 27 CFR 31.52 - Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers.

    Science.gov (United States)

    2010-04-01

    ... liquors consummating sales of wines or beer at premises of other dealers. 31.52 Section 31.52 Alcohol... § 31.52 Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers... wholesale dealer on account of those sales. (b) Sales of beer. Any wholesale dealer in liquors who...

  10. 78 FR 49283 - Chicken Ranch Rancheria-Chicken Ranch Liquor Licensing Ordinance, Ordinance No. 12-10-03

    Science.gov (United States)

    2013-08-13

    ... Bureau of Indian Affairs Chicken Ranch Rancheria--Chicken Ranch Liquor Licensing Ordinance, Ordinance No... the Chicken Ranch Liquor Licensing Ordinance, Ordinance No. 12-10-03. The Ordinance regulates and controls the possession, sale and consumption of liquor within the Indian Country of the Chicken...

  11. 40 CFR 430.03 - Best management practices (BMPs) for spent pulping liquor, soap, and turpentine management, spill...

    Science.gov (United States)

    2010-07-01

    ... spent pulping liquor, soap, and turpentine management, spill prevention, and control. 430.03 Section 430... practices (BMPs) for spent pulping liquor, soap, and turpentine management, spill prevention, and control... Liquor, Soap, and Turpentine Service: Any process vessel, storage tank, pumping system, evaporator,...

  12. Black Consciousness

    Science.gov (United States)

    Hraba, Joseph; Siegman, Jack

    1974-01-01

    Black militancy is treated as an instance of class consciousness with criteria and scales developed to measure black consciousness and "self-placement" into black consciousness. These dimensions are then investigated with respect to the social and symbolic participation in the ideology of the black movement on the part of a sample of black…

  13. 不同茶类茶汤pH值的研究%Preliminary on pH of different tea liquor

    Institute of Scientific and Technical Information of China (English)

    郭桂义; 葛国平

    2012-01-01

    The pH of green tea,black tea,Oolong tea,Pu-er tea liquor were measured.Different tea acid and alkaline differs somewhat.Green tea,black tea,and the weak acidic acid relatively strong tea,but for weakly acidic pH,tea and tea types and production methods.%对不同绿茶、红茶、乌龙茶和黑茶4种茶类茶汤的pH进行了测定,结果表明,不同茶叶的酸碱性有所不同。绿茶酸性最弱,红茶酸性最强,青茶和普洱茶酸性介于中间,但都为弱酸性,说明茶汤酸碱度与茶叶种类和制作方法有关。

  14. Recovery of sugars from ionic liquid biomass liquor by solvent extraction

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, Timothy Charles R.; Holmes, Bradley M.; Simmons, Blake A.; Blanch, Harvey W.

    2015-10-13

    The present invention provides for a composition comprising a solution comprising (a) an ionic liquid (IL) or ionic liquid-aqueous (ILA) phase and (b) an organic phase, wherein the solution comprises a sugar and a boronic acid. The present invention also provides for a method of removing a sugar from a solution, comprising: (a) providing a solution comprising (i) an IL or ILA phase and (ii) an organic phase, wherein the solution comprises an IL, a sugar and a boronic acid; (b) contacting the sugar with the boronic acid to form a sugar-boronic acid complex, (c) separating the organic phase and the aqueous phase, wherein the organic phase contains the sugar-boronic acid complex, and optionally (d) separating the sugar from the organic phase.

  15. Electrowinning of lead powder from chloride leach liquor

    Energy Technology Data Exchange (ETDEWEB)

    Owais, Ashour [Suez Canal Univ., Suez (Egypt). Metallurgical and Materials Engineering Dept.

    2012-11-15

    Electrowinning of lead powder from chloride leach liquor obtained from secondary lead slag leached in hydrochloric acid is the main aim of this work. The resulted lead chloride solution (leachate) containing 2.2 wt.-% Pb and 1.24 wt.-% HCl was electrowon in an electrolytic cell containing one graphite plate as inert anode and two lead sheets as starting permanent cathodes. Different electrolysis parameters such as current density, electrolyte temperature and electrolyte stirring rate were studied. As indicated by SEM, EDX and XRD analyses, fine and pure (100 % Pb) powders with a dispersed and needle-like shape were formed with cathodic current efficiency up to 67.9 % and electrical energy demand ranges from 0.809 to 4.998 kWh/kg Pb with productivity up to 2.63 g/Ah. (orig.)

  16. Comparison of Algorithms for an Electronic Nose in Identifying Liquors

    Institute of Scientific and Technical Information of China (English)

    Zhi-biao Shi; Tao Yu; Qun Zhao; Yang Li; Yu-bin Lan

    2008-01-01

    When the electronic nose is used to identify different varieties of distilled liquors, the pattern recognition algorithm is chosen on the basis of the experience, which lacks the guiding principle. In this research, the different brands of distilled spirits were identified using the pattern recognition algorithms (principal component analysis and the artificial neural network). The recognition rates of different algorithms were compared. The recognition rate of the Back Propagation Neural Network (BPNN) is the highest. Owing to the slow convergence speed of the BPNN, it tends easily to get into a local minimum. A chaotic BPNN was tried in order to overcome the disadvantage of the BPNN. The convergence speed of the chaotic BPNN is 75.5 times faster than that of the BPNN.

  17. Incorporation of inorganic material in anoxic/aerobic-activated sludge system mixed liquor.

    Science.gov (United States)

    Wentzel, M C; Ubisi, M F; Lakay, M T; Ekama, G A

    2002-12-01

    In the bioreactor of the nitrification denitrification (ND)-activated sludge system, the mixed liquor is made up of organic and inorganic materials. In the current design procedures and simulation models, the influent wastewater characteristics and biological processes that influence the bioreactor mixed liquor organic solids (as volatile suspended solids, VSS, or COD) are explicitly included. However, the mixed liquor total suspended solids (TSS, i.e. organic + inorganic solids) are calculated simply from empirical ratios of VSS/TSS. The TSS concentration is fundamental in the design of secondary settling tanks and waste activated sludge disposal. Clearly, the empirical approach to obtaining an estimate for TSS is not satisfactory within the framework of a fundamentally based model. Accordingly, the incorporation of the inorganic material present in the influent wastewater into ND-activated sludge system mixed liquor was investigated. From an experimental investigation into the distribution of inorganics in the influent, mixed liquor and effluent of a laboratory-scale ND-activated sludge system, it was concluded inter alia that (i) of the total inorganic solids in the influent, only a small fraction (2.8-7.5%) is incorporated into the mixed liquor, (ii) most of the inorganics in the influent (mean 88%) and effluent (mean 98.5%) are in the dissolved form, the balance being particulate, and (iii) the influent and effluent inorganic dissolved solids concentrations are closely equal (mean effluent to influent ratio 100%). Further, a number of models were developed to quantify the mixed liquor inorganic, and, hence, total solids. From an evaluation of these models against the experimental data, it would appear that the best approach to model the incorporation of inorganics into the activated sludge mixed liquor is to follow the concepts and principles used to develop the existing models for organic materials. With this approach, reasonably close correlation between

  18. Method for improving separation of carbohydrates from wood pulping and wood or biomass hydrolysis liquors

    Science.gov (United States)

    Griffith, William Louis; Compere, Alicia Lucille; Leitten, Jr., Carl Frederick

    2010-04-20

    A method for separating carbohydrates from pulping liquors includes the steps of providing a wood pulping or wood or biomass hydrolysis pulping liquor having lignin therein, and mixing the liquor with an acid or a gas which forms an acid upon contact with water to initiate precipitation of carbohydrate to begin formation of a precipitate. During precipitation, at least one long chain carboxylated carbohydrate and at least one cationic polymer, such as a polyamine or polyimine are added, wherein the precipitate aggregates into larger precipitate structures. Carbohydrate gel precipitates are then selectively removed from the larger precipitate structures. The method process yields both a carbohydrate precipitate and a high purity lignin.

  19. Black Droplets

    CERN Document Server

    Santos, Jorge E

    2014-01-01

    Black droplets and black funnels are gravitational duals to states of a large N, strongly coupled CFT on a fixed black hole background. We numerically construct black droplets corresponding to a CFT on a Schwarzchild background with finite asymptotic temperature. We find two branches of such droplet solutions which meet at a turning point. Our results suggest that the equilibrium black droplet solution does not exist, which would imply that the Hartle-Hawking state in this system is dual to the black funnel constructed in \\cite{Santos:2012he}. We also compute the holographic stress energy tensor and match its asymptotic behaviour to perturbation theory.

  20. Analysis of cracking of co-extruded recovery boiler floor tubes

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, J.R.; Taljat, B.; Wang, X.L. [and others

    1997-08-01

    Cracking of the stainless steel layer in co-extruded 304L/SA210 tubing used in black liquor recovery boilers is being found in an ever-increasing number of North American pulp and paper mills. Because of the possibility of a tube failure, this is a significant safety issue, and, because of the extra time required for tube inspection and repair, this can become an economic issue as well. In a project funded by the U.S. Department of Energy and given wide support among paper companies, boiler manufacturers, and tube fabricators, studies are being conducted to determine the cause of the cracking and to identify alternate materials and/or operating procedures to prevent tube cracking. Examination of cracked tubes has permitted characterization of crack features, and transmission electron microscopy is providing information about the thermal history, particularly cyclic thermal exposures, that tubes have experienced. Neutron and x-ray diffraction techniques are being used to determine the residual stresses in as-fabricated tube panels and exposed tubes, and finite element modeling is providing information about the stresses the tubes experience during operation. Laboratory studies are being conducted to determine the susceptibility of the co-extruded 304L/SA210 tubes to stress corrosion cracking, thermal fatigue, and corrosion in molten smelt. This paper presents the current status of these studies. On the basis of all of these studies, recommendations for means to prevent tube cracking will be offered.

  1. Application of Mechanical Vapour Recompression (MVR) in Pulping Waste Liquor Evaporation%机械蒸汽再压缩(MVR)技术在制浆废液蒸发中的应用

    Institute of Scientific and Technical Information of China (English)

    赵云松; 胡海军; 张丹

    2013-01-01

    以制浆废液为研究对象,提出了机械蒸汽再压缩(MVR)技术与多效蒸发相结合的组合蒸发工艺,并以化学浆黑液及化机浆废水的蒸发为例,比较了组合蒸发与多效蒸发两种工艺.%This paper studies the evaporation technique of pulping waste liquor, and puts forward a new evaporation process which combines mechanical vapour recompression (MVR) and multi-effect evaporation technology. With the evaporation of chemical pulping black liquor & APMP effluent as examples, the two process of combined evaporation and multi-effect evaporation are compared.

  2. Black Eye

    Science.gov (United States)

    ... eyesight if not treated. If both eyes are black after a head injury, it could signify a skull fracture or other serious injury. Next Black Eye Symptoms Related Ask an Ophthalmologist Answers How ...

  3. 75 FR 44011 - Liquor Ordinance of the Wichita and Affiliated Tribes

    Science.gov (United States)

    2010-07-27

    ... Liquor Ordinance by Resolution No. WT-10-31 on May 14, 2010. Dated: July 18, 2010. Paul Tsosie, Chief of... license of any State or identification card issued by any State department of motor vehicles; (2)...

  4. 75 FR 23289 - Ponca Tribe of Indians of Oklahoma Liquor Control Ordinance

    Science.gov (United States)

    2010-05-03

    ... members shall not accept gratuity, compensation, or other things of value from any Liquor producer..., but not limited to, a determination that the applicant is of good character and reputation and...

  5. Static Analysis of No.2 Vessel in Uranium Liquor Critical Facility

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>In order to make it clear whether the No.2 vessel of the uranium liquor critical facility have enough intensity to endure the static loads or not and supply data for the general stress evaluation of the facility,

  6. Stress Analysis and Evaluation of Piping System in Uranium Liquor Critical Facility

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The piplines of the piping system in the uranium liquor critical facility are very thin, so the piping rigidity is bad, the measuring cylinders piping system (Fig. 1) connects the vessel the pump and the rigid

  7. A GMDH Approach to Modelling Gibbsite Solubility in Bayer Process Liquors

    Directory of Open Access Journals (Sweden)

    Jennifer K. Muller

    2004-02-01

    Full Text Available Abstract: The most widely employed industrial process for producing alumina (Bayer process involves the dissolution of available aluminium hydroxide minerals present in raw bauxite into high temperature sodium hydroxide solutions. On cooling of the solution, or liquor in the industrial vernacular, Al is precipitated from solution in the form of gibbsite (Al(OH3. In order to optimise the process, a detailed knowledge of factors influencing gibbsite solubility is required, a problem that is confounded by the presence of liquor impurities. In this paper, the use of the Group Method of Data Handling (GMDH polynomial neural network for developing a gibbsite equilibrium solubility model for Bayer process liquors is discussed. The resulting predictive model appears to correctly incorporate the effects of liquor impurities and is found to offer a level of performance comparable to the most sophisticated phenomenological model presented to date.

  8. Simultaneous and rapid determination of multiple component concentrations in a Kraft liquor process stream

    Science.gov (United States)

    Li, Jian; Chai, Xin Sheng; Zhu, Junyoung

    2008-06-24

    The present invention is a rapid method of determining the concentration of the major components in a chemical stream. The present invention is also a simple, low cost, device of determining the in-situ concentration of the major components in a chemical stream. In particular, the present invention provides a useful method for simultaneously determining the concentrations of sodium hydroxide, sodium sulfide and sodium carbonate in aqueous kraft pulping liquors through use of an attenuated total reflectance (ATR) tunnel flow cell or optical probe capable of producing a ultraviolet absorbency spectrum over a wavelength of 190 to 300 nm. In addition, the present invention eliminates the need for manual sampling and dilution previously required to generate analyzable samples. The inventive method can be used in Kraft pulping operations to control white liquor causticizing efficiency, sulfate reduction efficiency in green liquor, oxidation efficiency for oxidized white liquor and the active and effective alkali charge to kraft pulping operations.

  9. 78 FR 54670 - Miami Tribe of Oklahoma-Liquor Control Ordinance

    Science.gov (United States)

    2013-09-05

    ... defined by this Ordinance shall establish prima facie intent of unlawfully keeping liquor for sale... the obligations imposed upon the licensee by the MBRC, by the Miami Tribe of Oklahoma, or any...

  10. A prospective clinical study of feto-maternal outcome in pregnancies with abnormal liquor volume

    OpenAIRE

    Rutwa J. Chavda; Hardev B. Saini

    2014-01-01

    Background: Evaluating feto-maternal outcome in pregnancies with abnormal liquor volume. Methods: 200 pregnant subjects between 20 and 42 weeks of gestation, who were clinically suspected to have an abnormal amniotic fluid volume (oligohydramnios or polyhydramnios) were subjected to ultrasonographic (USG) assessment of amniotic fluid index. The subjects were closely monitored during pregnancy, labour and puerperium. Results: Ultrasonically, abnormal liquor volume was confirmed in 90-93...

  11. Effect of kraft dead load on recovery boiler performance: a theoretical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Blackwell, B.; MacCallum, C.

    1987-07-01

    Reduced liquor dead load decreases fireside deposit formation in recovery boilers. Reduced dead load also increases temperatures in the lower furnace, providing many advantages, including decreased total reduced sulphur emissions and a higher reduction efficiency. Boiler thermal efficiency is improved. It was estimated that by applying a process based on partial evaporation of white liquor, the capacity of one Babcock and Wilcox boiler could be increased by about 7%. A portion of this increase could be achieved by other process measures directed at increasing the causticizing and reduction efficiency. 19 refs., 1 tab.

  12. Determination of N-propanol Content in Liquor by Gas Chromatography with Internal Standard Substance%内标-气相色谱法分析白酒中的正丙醇含量

    Institute of Scientific and Technical Information of China (English)

    宋光林; 杨昌彪; 肖飞; 李荣华; 文锡梅

    2012-01-01

    A quantitative method was established for determination of n-propanol content in liquor by gas chroma- tography with internal standard substance. N-butyl acetate was used as an internal standard substance. 0.2 ml of 2.00 % of internal standard solution was shifted into 10 ml of liquor, mixed and gained the liquor sample with the quantity of 0. 358 7 g/L of the internal standard substance. The liquor sample in GC was injected by the automatic injector, sample of n-propanol was separated from ethanol by ZB-624 column, and then the n-propanol content in the liquor was determined by the internal standard substance and analyzed by gas chromatography with the internal standard substance. The recovery of n-propanol was from 94.47 % to 103.4 %, the relative standard deviation was 3.16 % , and the reproducibility was good. The method could determinate the content of n-propanol in liquor and meet the quantitative requirements, which was suitable for the determination of n-propanol content in large quanti- ties of liquor.%建立内标定量方式测定白酒中正丙醇含量的气相色谱检测方法。用醋酸正丁酯作内标物,抽取白酒10ml,移入2.00%的内标液0.2ml,混匀,其白酒样品中添加内标液的量为0.3587g/L。应用自动进样器进样,采用ZB-624柱分离样品中的正丙醇和乙醇,然后采用内标定量方式分析白酒中正丙醇含量。内标一气相色谱法分析白酒中正丙醇含量,正丙醇的加标回收率在94.47%~103.4%,相对标准偏差为3.16%,且重现性好。该法分析白酒中的正丙醇含量,能满足检测工作要求,适合于大批量白酒中正丙醇含量的测定。

  13. Black Holes

    Science.gov (United States)

    Luminet, Jean-Pierre

    1992-09-01

    Foreword to the French edition; Foreword to the English edition; Acknowledgements; Part I. Gravitation and Light: 1. First fruits; 2. Relativity; 3. Curved space-time; Part II. Exquisite Corpses: 4. Chronicle of the twilight years; 5. Ashes and diamonds; 6. Supernovae; 7. Pulsars; 8. Gravitation triumphant; Part III. Light Assassinated: 9. The far horizon; 10. Illuminations; 11. A descent into the maelstrom; 12. Map games; 13. The black hole machine; 14. The quantum black hole; Part IV. Light Regained: 15. Primordial black holes; 16. The zoo of X-ray stars; 17. Giant black holes; 18. Gravitational light; 19. The black hole Universe; Appendices; Bibliography; Name index; Subject index.

  14. Maleic acid treatment of biologically detoxified corn stover liquor.

    Science.gov (United States)

    Kim, Daehwan; Ximenes, Eduardo A; Nichols, Nancy N; Cao, Guangli; Frazer, Sarah E; Ladisch, Michael R

    2016-09-01

    Elimination of microbial and enzyme inhibitors from pretreated lignocellulose is critical for effective cellulose conversion and yeast fermentation of liquid hot water (LHW) pretreated corn stover. In this study, xylan oligomers were hydrolyzed using either maleic acid or hemicellulases, and other soluble inhibitors were eliminated by biological detoxification. Corn stover at 20% (w/v) solids was LHW pretreated LHW (severity factor: 4.3). The 20% solids (w/v) pretreated corn stover derived liquor was recovered and biologically detoxified using the fungus Coniochaeta ligniaria NRRL30616. After maleic acid treatment, and using 5 filter paper units of cellulase/g glucan (8.3mg protein/g glucan), 73% higher cellulose conversion from corn stover was obtained for biodetoxified samples compared to undetoxified samples. This corresponded to 87% cellulose to glucose conversion. Ethanol production by yeast of pretreated corn stover solids hydrolysate was 1.4 times higher than undetoxified samples, with a reduction of 3h in the fermentation lag phase. PMID:27262718

  15. Fine crystallization purification of mother liquors for the growth of α-LiIO3 single crystals

    International Nuclear Information System (INIS)

    The problems encountered in the additional purification of mother liquors and the possibility of optimizing this process, using mother liquor for the crystal growth of lithium iodate, α-LiIO3, as a model system, are reviewed. The ability of some crystals, e.g., those of hexagonal lithium iodate, to absorb cation impurities from the mother liquor during growth, confirmed by experimental evidence, is used to develop a process for controlled fine purification of mother liquors. Using crystallization onto monocrystal plates of the same composition as the macro component in solution, one can achieve the desired purity of the mother liquor in terms of cation microimpurities. A routine procedure is proposed for calculating the desired degree of crystallization (using known values of λ), which makes it possible to achieve essentially any purity of mother liquors in terms of cation microimpurities

  16. Black Culture

    Directory of Open Access Journals (Sweden)

    Angela Khristin Brown

    2013-07-01

    Full Text Available The migration of blacks in North America through slavery became united.  The population of blacks past downs a tradition of artist through art to native born citizens. The art tradition involved telling stories to each generation in black families. The black culture elevated by tradition created hope to determine their personal freedom to escape from poverty of enslavement and to establish a way of life through tradition. A way of personal freedoms was through getting a good education that lead to a better foundation and a better way of life. 

  17. Effects of Non Process Elements in the chemical recovery system of paper mills; Effekter av PFG foer integrerade pappersbruk vid indunstning och foerbraenning av bioslam i sodapannan

    Energy Technology Data Exchange (ETDEWEB)

    Dahlbom, Johan [AaF Process AB, Stockholm (Sweden); Wadsborn, Rickard [STFI-Packforsk AB, Stockholm (Sweden)

    2005-09-01

    Effluent treatment of pulp and paper mills generates a biological sludge that according to Swedish implementation of EU-directives from 2005 has to be taken care of by incineration or by production of soil for agriculture or ground cover. An alternative way to take care of the sludge is incineration in the recovery boiler. This method is used in two Finish and two Swedish pulp mills with good results. The purpose of this project is to investigate the consequences for integrated pulp and paper mills when the biological sludge is incinerated in the recovery boiler. The biological sludge contents Non Process Elements, NPE, which increase the risks of incrustations in the system and increase the need of make up lime. This study comprises the following NPE: aluminum, silicon, phosphorus, chloride, potassium, manganese, magnesium, iron, copper, barium and calcium. The simulation program WinGEMS 5.0 (Pacific Simulation) was used in the study to predict the levels of NPE in the recovery system of the Kraft mills. Three different pulp and paper mills were selected for the study, Billerud Skaerblacka, ASSI Domaen Froevi and SCA Obbola. The mills are different concerning raw materials, process, degree of own produced pulp and paper products. All three the mills have effluent treatment and use the method of activated sludge that generates a surplus of biological sludge. The results of the study proved that for Skaerblacka mill the method is applicable. For Obbola the prerequisites are somewhat more complicated, the effluent treatment generates considerably higher amount of sludge per ton pulp produced due to the treatment technique and use of waste paper (40 %) for the paper machine. The high input of aluminum with the sludge will give troublesome incrustations of sodium-aluminum-silicate on the heat surfaces in the evaporation plant. To eliminate the aluminum from the system magnesium can be added to the black liquor which will precipitate as the double salt hydrotalcite in

  18. Changes in procyanidins and tannin concentration as affected by cocoa liquor roasting

    Directory of Open Access Journals (Sweden)

    Misnawi Jati

    2009-08-01

    Full Text Available Changes in cocoa procyanidins and tannin concentration as affected by cocoa liquor roasting were studied by heating up cocoa liquor of fermented beans containing 58 g kg-1 of polyphenols and the same liquor which was enriched with crude polyphenols, extracted from freeze-dried unfermented cocoa beans to a final concentration of 170 g kg-1. The liquors were roasted at 120 OC for 15, 25, 35 and 45 min with three replications. Result of the study showed that cocoa bean polyphenol was resistant against high temperature during heating of cocoa liquor 120 OC for up to 45 min. The resistance was stronger with the unfermented cocoa bean polyphenol than with fermented cocoa. High temperature promoted a small quantity of monomers up to pentamers of the fermented cocoa bean polyphenol to polymerize into higher oligomers, but did not with unfermented cocoa bean polyphenol. These results imply that the problem of lack in cocoa flavor in terms high astringency and bitterness due to high polyphenol content cannot be overcome by the application of high temperature during chocolate processing, meanwhile cocoa bean polyphenol could still give beneficial as an antioxidant even after high temperature application.Key words: Cocoa bean, polyphenol, procyanidin, tannin, roasting, antioxidant, flavor, astringency.

  19. Laser Induced Fluorescence For Measurement Of Lignin Concentrations In Pulping Liquors

    Science.gov (United States)

    Horvath, J. J.; Semerjian, H. G.; Biasca, K. L.; Attala, R.

    1988-11-01

    Laser excited fluorescence of pulping liquors was investigated for use in the pulp and paper industry for process measurement and control applications. Liquors from both mill and laboratory cooks were studied. A Nd-YAG pumped dye laser was used to generate the excitation wavelength of 280 nm; measurements were also performed using a commercially available fluorometer. Measurements on mill pulping liquors gave strong signals and showed changes in the fluorescence intensity during the cook. Absorption spectra of diluted mill liquor samples showed large changes during the cook. Samples from well controlled and characterized laboratory cooks showed fluorescence to be linear with concentration over two decades with an upper limit of approximately 1000 ppm dissolved lignin. At the end of these cooks a possible chemical change was indicated by an increase in the observed fluorescence intensity. Results indicate that lignin concentrations in pulping liquors can be accurately determined with fluorescence in the linear optical region over a greater dynamic range than absorption spectroscopy. Laser induced fluorescence may also provide an indication of chemical changes occurring in the lignin structure during a cook.

  20. Imbibition-displacement of an aqueous interstitial liquor by an organic fluid containing a surfactant

    International Nuclear Information System (INIS)

    Imbibition was investigated as a method of assisting the removal of interstitial liquor from the salt cake contained in the Hanford underground storage tanks. In this application, imbibition would be the displacement of the interstitial liquor from the salt cake by a heavy organic containing a surfactant. Preliminary studies with a salt cake liquor system formed from NaNO3 alone indicated that a surfactant-tetrachloroethylene system could displace 75 percent of the interstitial liquor. Further investigations were carried out with a sale cake--liquor system containing NaNO3, NaNO2, NaAlO2, and NaOH. Twenty-seven surfactants and two heavy organics, carbon tetrachloride and tetrachloroethylene, were tested. In one test, an anionic surfactant and tetrachloroethylene gave promising results with the latter salt cake; however, these results could not be duplicated. All other surfactants tested gave unsatisfactory results. The presence of NaOH in the salt cake recipe seems to increase the interfacial tension of the interstitial liquid-organic fluid system. Investigations of chemical and radiation stability, corrosion aspects, and ease of removability from the tanks of the heavy organic systems revealed t

  1. A field experimental study of lignin sand stabilizing material (LSSM) extracted from spent-liquor of straw pulping paper mills

    Institute of Scientific and Technical Information of China (English)

    WANG Han-jie; LI Jing; LU Xiao-zhen; JIN Yong-can

    2005-01-01

    A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material( LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the extracts of black-liquor issued by straw pulp paper mills. Unlike the polyvinyl acetate or foamed asphalt commonly used for dune stabilization, the new material is plant-friendly and can be used with virescence actions simultaneously. The field experimental study was conducted since 2001 in China' s Northwest Ningxia Hui Autonomous Region and has been proved that LSSM is effective in stabilizing the fugitive dunes, making the arenaceous plants survive and the bare dune vegetative. The advisable solution concentration is 2% and the optimal field spraying quantity is 2.5 L/m2. The soil nutrients of the stabilized and greened dune, such as organic matter, available phosphorous and total nitrogen are all increased compared with the control treatment, which is certainly helpful to the growth of arenaceous plants. The technique is worthwhile to be popularized because it is provided not only a new method for desertification control but also an outlet for cleaning contaminants issued from the straw paper mills.

  2. 氯酸钠生产中母液处理工艺研究%Study on treatment process of mother liquor in sodium chlorate industry

    Institute of Scientific and Technical Information of China (English)

    郭淑芬; 周俊波; 潘胜

    2012-01-01

    Recently .chemical precipitation is used for treating sulfate radicals in the sodium chlorate production, but produces a considerable amount of sludge containing Cr,causing pollution to the environment.The use of ion exchange resin and nanofiltration membrane device integrated treatment of sodium chlorate industry crystallization mother liquor was presented.This method not only could recover sodium dichromate but also could remove sulfate radicals.Results showed that the recovery rate of sodium dichromate could reach 98%, and the content of sodium sulfate in the crystallization mother liquor was less than 3 g/L after treatment, reaching the recycling requirements.%目前,在氯酸钠生产中常用化学沉淀法处理硫酸根,但是会产生大量含铬污泥,污染环境.提出利用离子交换树脂和纳滤膜装置综合处理结晶母液的方法,既能回收重铬酸钠又能脱除硫酸根.实验结果表明,重铬酸钠的回收率可达98%,结晶母液处理后硫酸钠质量浓度低于3 g/L,达到母液循环利用的要求.

  3. Black hole evaporation: a paradigm

    International Nuclear Information System (INIS)

    A paradigm describing black hole evaporation in non-perturbative quantum gravity is developed by combining two sets of detailed results: (i) resolution of the Schwarzschild singularity using quantum geometry methods and (ii) time evolution of black holes in the trapping and dynamical horizon frameworks. Quantum geometry effects introduce a major modification in the traditional spacetime diagram of black hole evaporation, providing a possible mechanism for recovery of information that is classically lost in the process of black hole formation. The paradigm is developed directly in the Lorentzian regime and necessary conditions for its viability are discussed. If these conditions are met, much of the tension between expectations based on spacetime geometry and structure of quantum theory would be resolved

  4. ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

    Institute of Scientific and Technical Information of China (English)

    LIUXiaozhen

    2002-01-01

    Adsorption capacity of ACFF in cyanide leaching liquor of gold ores was studied with cyanide leaching liquor of gold ores,containing various kinds of ions.The adsorbed leaching liquor was analyzed by atomic emission spectroscopy and colorimetric method.The contents of various kinds. of ions in ACFF were determined with X-ray photoctron spectroscopy.ACFF not only adsorbed gold but also adsorbed arsenic,nickel,zinc,calcium,sulphur,bismuth,copper,iron,silver and cyanide,anion.Atomic percentage of C and those of O,N,Zn,Fe increase and decrease respectively with the increase of the layer depth,while those of Ca,Au,Ag keep constant.

  5. FACTORS AFFECTING THE FIRST STAGE DIGESTION OF FORAGES USING FAECAL LIQUOR

    Directory of Open Access Journals (Sweden)

    A.A. Solangi

    2003-01-01

    Full Text Available An experiment was carried out to study the effect of duration of incubation on the digestibility with the aim to reduce the time of incubation of the first stage digestion. This could be achieved if method for improving the potency of faecal liquor is evolved and verified. To estimate the time required to complete digestion of forages, triplicate samples of ryegrass and two varieties of straw were incubated in the faecal liquor for digestion for the periods of 0, 3, 6, 9, 24, 34, 48, 58, 72, 80 or 96 hours. It was observed that the incubation time required to complete digestion in faecal liquor for ryegrass and straw was 58 and 96 hours, respectively. The rate of digestion was maximal from 9 to 48 hours during which time approximately 1.11 mg/hour were solublised.

  6. Recovery of arabinan in acetic acid-catalyzed hydrothermal pretreatment on corn stover

    DEFF Research Database (Denmark)

    Xu, Jian; Hedegaard, Mette Christina; Thomsen, Anne Belinda

    2009-01-01

    Acetic acid-catalyzed hydrothermal pretreatment was done on corn stover under 195 °C, 15 min with the acetic acid ranging from 5 × 10−3 to 0.2 g g−1 corn stover. After pretreatment, the water-insoluble solids (WISs) and liquors were collected respectively. Arabinan recoveries from both WIS...... and liquors were investigated. The results indicate that there was no detectable arabinan left in the WIS when the acetic acid of 0.1 and 0.2 g g−1 corn stover were used in the pretreatment. The arabinan contents in the other WISs were not more than 10%. However, the arabinan found in the liquors...... was not covering the amount of arabinan released from the raw corn stover. For the arabinan recovery from liquor fractions, the highest of 43.57% was obtained by the pretreatment of acetic acid of 0.01 g g−1 of corn stover and the lowest was only 26.77% when the acetic acid of 0.2 g g−1 corn stover was used...

  7. 白酒中5种生物胺的HPLC定量分析%Quantification for 5 selected biogenic amines in Chinese liquor by HPLC

    Institute of Scientific and Technical Information of China (English)

    温永柱; 范文来; 徐岩; 聂尧

    2013-01-01

    The reverse - phase high performance liquid chromatogramphy ( HPLC) coupled with ultraviolet (UV) detection was developed for the quantification of a variety of biogenic amines( BAs) in Chinese liquor.Quantification method generally includes; liquid-liquid extraction( LLE), precolumn derivatization with Dansyl chloride, nitrogen concentration,RP-HPLC detection.Using Agilent C18 chromatographic column(4.6mm × 250mm,5μm) ,the mobile phase for gradient elution consisted of acetonitrile and water,for gradient elution.the flow rate was 0.4mL/min,the column temperature was 20℃ and the detection wavelength was 254nm.The method showed good linearity(R2 > 0.99)over the concentration ranges.The detection limit, relative standard deviation ( RSD), recovery were 0.001 ~ 0.032mg/L,less than 6% ,80.19%~104.05%.The results showed that biogenic amines in brewed wine and Chinese liquor were different;the highest concentration of BAs in Chinese liquor was pyrrolidine.Preliminary test three kinds of basic type of Chinese liquor, Chinese soy sauce aroma type liquor had lower biogenic amines than Chinese strong aromatic spirits and fen-flavor liquors.%应用紫外检测-反相高效液相色谱(RP-HPLC)检测技术,建立了白酒中多种生物胺的定量方法.定量方法包括液液萃取(LLE)、丹磺酰氯柱前衍生、氮吹浓缩、RP-HPLC检测.采用Agilent C18色谱柱(4.6 mm×250mm,5μm),流动相采用乙腈和水,进行梯度洗脱,流速为0.4mL/min,柱温为20℃,检测波长为254nm.该方法在线性范围内线性关系良好(R2>0.99),5种生物胺的最低检测限为0.001 ~ 0.032 mg/L,相对标准偏差(RSD)低于6%,回收率为80.19% ~104.05%.研究结果表明,白酒中生物胺与发酵酒中不同,其吡咯烷浓度最高.初步检测了三种基本香型的白酒,与浓香型、清香型白酒相比,酱香型白酒具有更低的生物胺.

  8. Backup & Recovery

    CERN Document Server

    Preston, W

    2009-01-01

    Packed with practical, freely available backup and recovery solutions for Unix, Linux, Windows, and Mac OS X systems -- as well as various databases -- this new guide is a complete overhaul of Unix Backup & Recovery by the same author, now revised and expanded with over 75% new material.

  9. Recovery Online

    Science.gov (United States)

    Clark, John R.

    2007-01-01

    Since the founding of Alcoholics Anonymous (AA) in 1935, programs offering opportunity for recovery from alcoholism and other addictions have undergone vast changes. The Internet has created nearly limitless opportunities for recovering people and those seeking recovery to find both meetings and places where they can gather virtually and discuss…

  10. 75 FR 39969 - Liquor Control Ordinance for the Manchester Band of Pomo Indians of the Manchester-Point Arena...

    Science.gov (United States)

    2010-07-13

    ... Bureau of Indian Affairs Liquor Control Ordinance for the Manchester Band of Pomo Indians of the Manchester-Point Arena Rancheria AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice. SUMMARY: This notice publishes the Liquor Control Ordinance of the Manchester Band of Pomo Indians of the...

  11. Investigation of boron extraction process with aid magnesium hydroxide from mother liquor of boron production

    International Nuclear Information System (INIS)

    Conditions of boron - magnesium concentrate preparation from mother liquor by coprecipitation of borate - ions by magnesium hydroxide are investigated. It is shown that boron - magnesium concentrate and products of its heat treatment at 100 - 500 deg C in water are dissolved partially, and in ammonium citrate - practically completely. Suppositions are made on the composition of the product prepared, on the the structure of its crystal lattice and the processes taking place in it during heat treatment. The conclusion is made on the perspectiveness of processing of mother liquor of boron industry for boron - magnesium concentrate

  12. ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Adsorption capacity of ACFF in cyanide leaching liquor of gold ores was studied withcyanide leaching liquor of gold ores, containing various kinds of ions. The adsorbed leaching liquorwas analyzed by atomic emission spectroscopy and colorimetric method. The contents of variouskinds of ions in ACFF were determined with X-ray photoctron spectroscopy. ACFF not onlyadsorbed gold but also adsorbed arsenic, nickel, zinc, calcium, sulphur, bismuth, copper, iron. silverand cyanide anion. Atomic percentage of C and those of O, N, Zr, Fe increase and decreaserespectively with the increase of the layer depth, while those of Ca, Au, Ag keep constant.

  13. Effect of high pressure treatment on the aging characteristics of Chinese liquor as evaluated by electronic nose and chemical analysis

    Science.gov (United States)

    Zhu, S. M.; Xu, M. L.; Ramaswamy, H. S.; Yang, M. Y.; Yu, Y.

    2016-08-01

    Several high pressure (HP) treatments (100–400 MPa 15 and 30 min) were applied to Chinese “Junchang” liquor, and aging characteristics of the liquor were evaluated. Results from the principal component analysis and the discriminant factor analysis of E-Nose demonstrated that HP treatment at 300 and 400 MPa resulted in significant (p aging process of Chinese liquor. However, HP treatment caused a slight increase in solid content, which might be somewhat undesirable. Sensory evaluation results confirmed that favorable changes in color and flavor of Chinese liquor were induced by HP treatment; however, overall gaps still existed between the quality of treated and six-year aged samples. HP treatment demonstrated a potential to accelerate the natural aging process for Chinese liquor, but long term studies may be needed further to realize the full potential.

  14. THE LIGNIN CONTENT IN BLACK LIQUID OF STRAW AS-AQ BY ULTRAVIOLET SPECTROPHOTOMETER

    Institute of Scientific and Technical Information of China (English)

    Haiqiang Shi; Bingyue Liu; Xingqiang Li; Longquan Xu; Beihai He

    2004-01-01

    The measurement of lignin content in black liquid of straw AS-AQ by ultraviolet spectrophotometer (UV)is discussed in this paper. Different dilution multiple and contrast solutions have an effect on the measured results of the lignin content by UV. The calculation method for the absorption coefficient and the scanning spectrum property of liquor acidified by SO2 are introduced in this paper.

  15. 隔夜皂化法测定白酒中总酯含量%Determination of Total Ester Content in Liquor by Overnight Saponification

    Institute of Scientific and Technical Information of China (English)

    李华萍; 李春江; 李燕

    2015-01-01

    对隔夜皂化法检验白酒总酯含量进行了实验研究,结果表明,在20℃下,静置16 h,得到的实验结果与回流皂化法测得的结果有很好的一致性,相对标准偏差为1.5%~2.1%,加标回收率为98.4~102.9%。%The total ester content in liquor with overnight saponification was experimentally studied, the results showed that at 20 ℃,standing 16h,the experimental results obtained with the results of reflux saponification are in good agreement with the relative standard deviation 1.5% to 2.1% and the recovery rate was 98.4 ~102.9%.

  16. Black psyllium

    Science.gov (United States)

    ... block your throat or esophagus and may cause choking. Do not take this product if you have ... take enough water. Otherwise, black psyllium might cause choking. Take at least 150 mL water for each ...

  17. Black tea

    Science.gov (United States)

    ... product containing black tea extract plus green tea extract, asparagus, guarana, kidney bean, and mate along with a combination of kidney bean pods, garcinia, and chromium yeast for 12 weeks does not reduce body weight ...

  18. Black tea

    Science.gov (United States)

    ... heartburn, dizziness, ringing in the ears, convulsions, and confusion. Also, people who drink black tea or other ... glimepiride (Amaryl), glyburide (DiaBeta, Glynase PresTab, Micronase), insulin, pioglitazone (Actos), rosiglitazone (Avandia), chlorpropamide (Diabinese), glipizide (Glucotrol), tolbutamide ( ...

  19. 27 CFR 31.75 - Dealer in beer and dealer in liquors at the same location.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Dealer in beer and dealer... Subject to Registration § 31.75 Dealer in beer and dealer in liquors at the same location. Any person who registers as a wholesale dealer in beer or retail dealer in beer and who thereafter begins to sell...

  20. Maleic acid treatment of bioabated corn stover liquors improves cellulose conversion to ethanol

    Science.gov (United States)

    Elimination of inhibitory compounds released during pretreatment of lignocellulose is critical for efficient cellulose conversion and ethanol fermentation. This study examined the effect of bioabated liquor from pretreated corn stover on enzyme hydrolysis of Solka Floc or pretreated corn stover soli...

  1. Effects of Chinese Liquors on Cardiovascular Disease Risk Factors in Healthy Young Humans

    Directory of Open Access Journals (Sweden)

    Ju-Sheng Zheng

    2012-01-01

    Full Text Available Objectives. To elucidate whether consumption of two Chinese liquors, tea-flavor liquor (TFL and traditional Chinese liquor (TCL have protective effects on cardiovascular disease (CVD risk factors in healthy human subjects. Methods. Forty-five healthy subjects (23 men, 22 women, aged 23–28, were recruited and randomized into two groups: TFL and TCL, and consumed 30 mL/day (45% (v/v alcohol of either liquor for 28 days. Results. Serum high-density lipoprotein cholesterol/low-density lipoprotein cholesterol (HDL-C/LDL-C and apolipoprotein A1 were significantly increased, and total cholesterol (TC and TC/HDL-C were significantly decreased after the intervention in both groups (P<0.05. Serum uric acid (P=0.004 for TFL, P=0.001 for TCL, glucose (P<0.001 for TFL, P<0.001 for TCL and endothelial adhesion molecules (P<0.05 were significantly decreased after the intervention. ADP-induced whole blood platelet aggregation was also significantly decreased after the intervention in both TFL and TCL groups (P<0.05. Conclusions. TFL and TCL consumption had protective effects on CVD risk factors in young humans. However, the results were valid only for 28 days, and that the possibility of adverse effect (liver, kidney of chronic alcohol consumption should be considered.

  2. 76 FR 77549 - Lummi Nation-Title 20-Code of Laws-Liquor Code

    Science.gov (United States)

    2011-12-13

    .... The Lummi Indian Business Council adopted this amendment to Title 20--Lummi Nation Code of Laws... that the Lummi Indian Business Council duly adopted this amendment to Title 20--Lummi Nation Code of... revenue, the Lummi Indian Business Council adopts this liquor ordinance to be known as the ``Lummi...

  3. Post-Digestion Liquor Treatment in the Method Combining Chemical Precipitation with Reverse Osmosis

    Directory of Open Access Journals (Sweden)

    Kuglarz Mariusz

    2014-12-01

    Full Text Available The aim of the study was to develop an effective treatment of post-digestion liquors highly-loaded with biogenic and organic substances. The scope of the research project encompassed: mesophilic anaerobic digestion of waste activated sludge (WAS as well as the treatment of post-digestion liquors, coming from the most appropriate HRT value of 25 days, in the process of ammonium magnesium phosphate (struvite precipitation targeted at ammonia nitrogen binding and a subsequent reverse osmosis (RO process. It was established that the method combining chemical precipitation and high-pressure filtration ensures a high degree of contaminants removal allowing for a direct release of treated liquors into the natural reservoir. However, in order to decrease the residual NH4+ concentration (6.1 mg NH4+/dm3 in the purified post-digestion liquors below the level allowing for a direct release to the natural reservoir, it turned out to be necessary to apply increased molar ratio of magnesium and phosphates (Mg:NH4+: PO43-= 1.5:1:1.5.

  4. 75 FR 22419 - Liquor Control Ordinance of the Prairie Band Potawatomi Nation

    Science.gov (United States)

    2010-04-28

    ... majority of child abuse, spousal abuse and elderly abuse that occurs on the Reservation is alcohol related... to combat the problems of alcohol abuse. (4) For the spiritual well-being of our children and..., and consumption of liquor within the Tribal lands and the treatment and reduction of alcohol abuse...

  5. Protozoan biomass relation to nutrient and chemical oxygen demand removal in activated sludge mixed liquor.

    Science.gov (United States)

    Akpor, Oghenerobor B; Momba, Maggy N B; Okonkwo, Jonathan O

    2008-08-01

    The relationship between biomass concentration to nutrient and chemical oxygen demand (COD) removal in mixed liquor supplemented with sodium acetate was investigated, using three protozoan isolates and three different initial biomass concentrations (10(1), 10(2) and 10(3) cells/mL). The study was carried out in a shaking flask environment at a shaking speed of 100 rpm for 96 h at 25 degrees C. Aliquot samples were taken periodically for the determination of phosphate, nitrate, COD and dissolved oxygen, using standard methods. The results revealed remarkable phosphate removal of 82-95% at biomass concentration of 10(3)cells/mL. A high nitrate removal of over 87% was observed at all initial biomass concentration in mixed liquor. There was an observed COD increase of over 50% in mixed liquor in at the end of 96-h incubation and this was irrespective of initial biomass concentration used for inoculation. The study shows the trend in nutrient and COD removal at different biomass concentrations of the test isolates in mixed liquor.

  6. Characterization of volatile compounds in Fen-Daqu - a traditional Chinese liquor fermentation starter

    NARCIS (Netherlands)

    Van-Diep, L.; Zheng, X.; Chen, J.Y.; Han, B.Z.

    2012-01-01

    Fen-Daqu is a saccharifying agent and fermentation starter for the production of Chinese liquor Fen (alcoholic spirit) and Fen traditional vinegar. The volatile compounds produced at seven incubation steps were analysed by HS-SPME-GC-MS. A total of 83 major volatile compounds were identified, includ

  7. THE PRODUCTION OF ORANGE PRESS LIQUOR SPIRIT: TECHNICAL AND ECONOMIC ASPECTS

    Directory of Open Access Journals (Sweden)

    J. O. FERREIRA

    2008-10-01

    Full Text Available

    The orange juice industry produces, at the end of the residue extraction, a by-product called orange press liquor. Considering its high content of soluble solids and the large volume of the liquor produced in Brazilian orange juice plants, an earlier study was conducted on the technical viability of using orange press liquor as raw material for a new distilled beverage, with promising results. With a view to increasing efficiency and possibly attracting investments in the growing international market for new and exotic beverages, the aim of the present study was to optimize the orange press liquor spirit process and to evaluate the economic aspects of its production. The results showed that this process can yield a good quality beverage, comparable to the sugar cane spirit cachaça and other similar products, as well as having economic advantages and potential for immediate further growth, without extra investment costs.

  8. Recent advances in nutrient removal and recovery in biological and bioelectrochemical systems.

    Science.gov (United States)

    Nancharaiah, Y V; Venkata Mohan, S; Lens, P N L

    2016-09-01

    Nitrogen and phosphorous are key pollutants in wastewater to be removed and recovered for sustainable development. Traditionally, nitrogen removal is practiced through energy intensive biological nitrification and denitrification entailing a major cost in wastewater treatment. Recent innovations in nitrogen removal aim at reducing energy requirements and recovering ammonium nitrogen. Bioelectrochemical systems (BES) are promising for recovering ammonium nitrogen from nitrogen rich waste streams (urine, digester liquor, swine liquor, and landfill leachate) profitably. Phosphorus is removed from the wastewater in the form of polyphosphate granules by polyphosphate accumulating organisms. Alternatively, phosphorous is removed/recovered as Fe-P or struvite through chemical precipitation (iron or magnesium dosing). In this article, recent advances in nutrients removal from wastewater coupled to recovery are presented by applying a waste biorefinery concept. Potential capabilities of BES in recovering nitrogen and phosphorous are reviewed to spur future investigations towards development of nutrient recovery biotechnologies. PMID:27053446

  9. Differences in liquor prices between control state-operated and license-state retail outlets in the U.S.

    Science.gov (United States)

    Siegel, Michael; DeJong, William; Albers, Alison B.; Naimi, Timothy S.; Jernigan, David H.

    2012-01-01

    Aims This study aims to compare the average price of liquor in the United States between retail alcohol outlets in states that have a monopoly ('control' states) with those that do not ('licence' states). Design A cross-sectional study of brand-specific alcohol prices in the United States. Setting We determined the average prices in February 2012 of 74 brands of liquor among the 13 control states that maintain a monopoly on liquor sales at the retail level and among a sample of 50 license-state liquor stores, using their online-available prices. Measurements We calculated average prices for 74 brands of liquor by control vs. license state. We used a random effects regression model to estimate differences between control and license state prices – overall and by alcoholic beverage type. We also compared prices between the 13 control states. Findings The overall mean price for the 74 brands was $27.79 in the license states (95% confidence interval [CI], $25.26–$30.32) and $29.82 in the control states (95% CI, $26.98–$32.66). Based on the random effects linear regression model, the average liquor price was approximately two dollars lower (6.9% lower) in license states. Conclusions In the United States monopoly of alcohol retail outlets appears to be associated with slightly higher liquor prices. PMID:22934914

  10. Black holes

    CERN Document Server

    Chrúsciel, P T

    2002-01-01

    This paper is concerned with several not-quantum aspects of black holes, with emphasis on theoretical and mathematical issues related to numerical modeling of black hole space-times. Part of the material has a review character, but some new results or proposals are also presented. We review the experimental evidence for existence of black holes. We propose a definition of black hole region for any theory governed by a symmetric hyperbolic system of equations. Our definition reproduces the usual one for gravity, and leads to the one associated with the Unruh metric in the case of Euler equations. We review the global conditions which have been used in the Scri-based definition of a black hole and point out the deficiencies of the Scri approach. Various results on the structure of horizons and apparent horizons are presented, and a new proof of semi-convexity of horizons based on a variational principle is given. Recent results on the classification of stationary singularity-free vacuum solutions are reviewed. ...

  11. Effect of high pressure treatment on the aging characteristics of Chinese liquor as evaluated by electronic nose and chemical analysis

    Science.gov (United States)

    Zhu, S. M.; Xu, M. L.; Ramaswamy, H. S.; Yang, M. Y.; Yu, Y.

    2016-08-01

    Several high pressure (HP) treatments (100–400 MPa 15 and 30 min) were applied to Chinese “Junchang” liquor, and aging characteristics of the liquor were evaluated. Results from the principal component analysis and the discriminant factor analysis of E-Nose demonstrated that HP treatment at 300 and 400 MPa resulted in significant (p gaps still existed between the quality of treated and six-year aged samples. HP treatment demonstrated a potential to accelerate the natural aging process for Chinese liquor, but long term studies may be needed further to realize the full potential.

  12. [Study on the Recognition of Liquor Age of Gujing Based on Raman Spectra and Support Vector Regression].

    Science.gov (United States)

    Wang, Guo-xiang; Wang, Hai-yan; Wang, Hu; Zhang, Zheng-yong; Liu, Jun

    2016-03-01

    It is an important and difficult research point to recognize the age of Chinese liquor rapidly and exactly in the field of liquor analyzing, which is also of great significance to the healthy development of the liquor industry and protection of the legitimate rights and interests of consumers. Spectroscopy together with the pattern recognition technology is a preferred method of achieving rapid identification of wine quality, in which the Raman Spectroscopy is promising because of its little affection of water and little or free of sample pretreatment. So, in this paper, Raman spectra and support vector regression (SVR) are used to recognize different ages and different storing time of the liquor of the same age. The innovation of this paper is mainly reflected in the following three aspects. First, the application of Raman in the area of liquor analysis is rarely reported till now. Second, the concentration of studying the recognition of wine age, while most studies focus on studying specific components of liquor and studies together with the pattern recognition method focus more on the identification of brands or different types of base wine. The third one is the application of regression analysis framework, which cannot be only used to identify different years of liquor, but also can be used to analyze different storing time, which has theoretical and practical significance to the research and quality control of liquor. Three kinds of experiments are conducted in this paper. Firstly, SVR is used to recognize different ages of 5, 8, 16 and 26 years of the Gujing Liquor; secondly, SVR is also used to classify the storing time of the 8-years liquor; thirdly, certain group of train data is deleted form the train set and put into the test set to simulate the actual situation of liquor age recognition. Results show that the SVR model has good train and predict performance in these experiments, and it has better performance than other non-liner regression method such

  13. Promotion of Chinese Liquor Principle is a Need for the Development of China Liquor Industry-review on Chinese Liquor Principle VII%弘扬中华酒道是我国酒业发展的需要--七论中华酒道

    Institute of Scientific and Technical Information of China (English)

    王贵玉

    2013-01-01

    The formation of Chinese liquor principle, its practice and development in Dalian were introduced. The relationship between Chinese liquor principle and alcoholic liquor marketing is briefly explained. It is regarded that alcoholic beverage culture is priceless, and a lubricant of the sustainable development of liquor industry. It is also tremendous and valuable assets as well as and an inexhaustible source of wisdom for liquor industry. Therefore, efforts should be made to promote Chinese liquor principle in order to promote China liquor industry.%介绍了中华酒道的形成及在大连的实践和发展,简单说明了中华酒道与酒类营销的关系,并认为酒文化是无价之宝,是维持酒业持续发展的润滑剂,是酿酒行业巨大而宝贵的无形资产,是酒业取之不竭的智慧源泉,因此,应努力弘扬中华酒道,以促进我国酒业发展。

  14. Enhanced oil recovery chemicals from renewable wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Grune, W.N.; Compere, A.L.; Griffith, W.L.; Crenshaw, J.M.

    1979-04-01

    Most of the wood pulp in the U.S. is produced by cooking, or digesting, wood chips in a chemical solution. These pulping processes have effluent streams which contain dissolved lignins, lignin breakdown products, and carbohydrates. There is a substantial economic incentive to use these materials as feedstocks for the production of high-valued micellar flood chemicals. The pulp and paper industries have practiced chemical recovery for almost a century. The largest chemical recycle processes are the internal recycle of inorganic salts for reuse in pulping. This is coupled with the use of waste organic compounds in the liquor as a fuel for directly-fired evaporation processes. Diversion of effluent and low valued streams for chemical recovery using fermentation, purification, or synthesis methods appears technically feasible in several cases. The use of new recovery processes could yield a variety of different wood-effluent based products. Some of the sugar acids in pulping liquors might be used as sequestering agents in reservoirs where there are large amounts of multivalent cations in flood brines. Fermentation production of high viscosity polymers, sequestering agents, and coagent alcohols appears worth further investigation. Tall oil acids and their derivatives can be used as surfactants in some reservoirs. Some waste constituents may adsorb preferentially on formations and thereby reduce loss of surfactants and other higher-valued chemicals.

  15. Recovery Spirituality

    Directory of Open Access Journals (Sweden)

    Ernest Kurtz

    2015-01-01

    Full Text Available There is growing interest in Alcoholics Anonymous (A.A. and other secular, spiritual, and religious frameworks of long-term addiction recovery. The present paper explores the varieties of spiritual experience within A.A., with particular reference to the growth of a wing of recovery spirituality promoted within A.A. It is suggested that the essence of secular spirituality is reflected in the experience of beyond (horizontal and vertical transcendence and between (connection and mutuality and in six facets of spirituality (Release, Gratitude, Humility, Tolerance, Forgiveness, and a Sense of Being-at-home shared across religious, spiritual, and secular pathways of addiction recovery. The growing varieties of A.A. spirituality (spanning the “Christianizers” and “Seculizers” reflect A.A.’s adaptation to the larger diversification of religious experience and the growing secularization of spirituality across the cultural contexts within which A.A. is nested.

  16. Epidemiological and histopathological study of relevance of Guizhou Maotai liquor and liver diseases

    Institute of Scientific and Technical Information of China (English)

    Jun Wu; Yu-Mei Yao; Ying-Ying Zhang; Lan-Zhen Ren; Lan Ye; Ling Li; Hui-Na Zhang; Ming-Liang Cheng; Guo-Hao Zhang; Rong-Wei Zhai; Neng-Hui Huang; Cheng-Xiu Li; Tian-Yong Luo; Shuang Lu; Zhi-Qin Yu

    2002-01-01

    AIM: To explore the relevance of Maotai liquor and liverdiseases.METHODS: Epidemiological study was conducted on groupsof subjects, each consisting of 3 subjects from the Maotailiquor group consisting of 99 individuals and one from thenon-alcoholic control group consisting of 33 individuals.Liver biopsy was performed on 23 volunteers from GuizhouMaotai Distillery who had a constant and long history ofdrinking Maotai liquor. Experimental histopathological studywas conducted as follows: sixty male Wistar rats weredivided into 3 groups randomly and fed with Maotai liquor,ordinary white wine, and physiological saline respectivelyfor a period of 8 and 12 weeks The rats were sacrificed inbatches, then serum ALT,AST, TBil, and AKP weremeasured. Rat livers were harvested to measure the liverindexes, GSH, and MDA. Histopathological examinationswere also performod. Another eighty mica were randomlydivided into 4 groups and fed with Maotei (at differentdosages of 10 mi @ kg-1 and 20 mi @ kg-1 ), ethanol, andphysiological saline. The animals were sacrificed after 4weeks and serum ALT was determined. Then the livers wereharvested and liver indexes and MDA were measured.RESULTS: The incidence rate of hepatic symptoms,splenomegaly, liver function imlairment, reversal ofAIbumin/Glolulin and increased diameter of portal veins inthe Maotai liquor group were 1.0 %(1/99), 1.0 %(1/99), 1.0% (1/99), 1.0 % (1/99), 0(0/99)and 0(0/99), 0(0/99) ,0(0/99),0(0/99), 0 (0/99), respectively. There was no significantdifference between the Maotai group and the non-alcoholiccontrol group( P > 0.05). Various degree of fatty infiltrationof hepatocytes was found in the 23 volunteers receiving liverbiopsy, uut there was no obvious hepatic fibrosis orcirrhosis. A compsrison was made between the Maotailiquor group and the ordinary white wine group. It wasfound that hepatic MDA in rats and mice were 0.33 + 0.10and 0.49 + 0.23 respectively in Maotai group and 0.61 + 0.22and0.66+0.32 in the ordinary white

  17. Fischer Black

    OpenAIRE

    Robert C. Merton; Myron S. Scholes

    2013-01-01

    ReprintThis article was originally published by Wiley for the American Finance Association (Merton RC, Scholes MS. 1995. Fischer Black. J. Finance 50(5):1359–70). It is reprinted with permission from John Wiley and Sons © 1995. Reference formatting was updated to facilitate linking.

  18. Techno-economic evaluation of membrane filtration for the recovery and re-use of tanning chemicals.

    Science.gov (United States)

    Scholz, W; Lucas, M

    2003-04-01

    The majority of pollution generated from leather manufacturing can be contributed to the inefficiency of chemical use in leather processing and to organic substances derived from the hides during processing. In particular, the overall tanning processes performed in drums can be characterized by a high consumption of water and chemicals, most of which are found in the final wastewater. To ensure full penetration and reaction of chemicals with collagen, chemicals are added in excess and are only partly up-taken by the leather. Significant savings of chemicals can be achieved by recovery and recycling of chemicals and water from part streams, thus reducing environmental impacts. This research formed an integrated approach to investigate and exploit the potential of a closed loop operation for various part streams of tanneries. Each of the process streams was separately collected, treated and purified by membrane technologies to obtain a recyclable liquor which can be re-used operationally. In this way a complete recovery of process liquors can be achieved for immediate operational re-use. Membrane technology has been applied to recover chemicals from un-hairing, vegetable tanning, chrome liquors and to polish saline part streams for re-use. By applying membrane filtration up to 90% of the treated liquors can be recovered giving a remaining concentrate volume of only 10%. The permeate obtained from several process areas contained to a high extent chemicals, which were re-used for leather processing.

  19. Spontaneous Recovery

    Science.gov (United States)

    Rescorla, Robert A.

    2004-01-01

    Spontaneous recovery from extinction is one of the most basic phenomena of Pavlovian conditioning. Although it can be studied by using a variety of designs, some procedures are better than others for identifying the involvement of underlying learning processes. A wide range of different learning mechanisms has been suggested as being engaged by…

  20. Flow of Hydrolysed Polyacrylamide Mother Liquor through Filter Bag: Detecting the Effects of Formulation and Process Properties on Pressure Drop

    Directory of Open Access Journals (Sweden)

    Zi-Ming Feng

    2016-01-01

    Full Text Available Hydrolysed polyacrylamide (HPAM mother liquor is mainly used to extract oil. The HPAM solution is needed to filter the impurity using a bag filter before it is injected into the oil well. Therefore, the pressure drop of HPAM mother liquor must be less than 0.02 MPa in the processing of impurity filtration. The influence factors on pressure drop need to be researched. In this work, the computational fluid dynamics program (CFD was used to research some key influence factors on pressure drop, such as porosity, outlet pressure of filter, inlet flow rate and viscosity of mother liquor. The simulation results indicated that with increasing porosity, outlet pressure, inlet flow rate and mother liquor viscosity, the pressure drop had increased after flowing through the filter bag.

  1. 浓香型白酒生产中酿酒微生物研究进展%A Review of Research Progress About Luzhou-flavor Liquor Making Microbes in Liquor Production

    Institute of Scientific and Technical Information of China (English)

    赵爽; 杨春霞; 徐曼; 窦屾; 廖永红

    2012-01-01

    In traditional liquor brewing process, microbes played an important role on liquor quality and flavor. In this paper, Overview of the liquor microbial researched situation, carried on the analysis and forecast, and proposed the importance of the relationship between research of liquor-making microbes and flavor. Ideas were provided for the production of Luzhou-flavor liquor brewing microbiology research, and the foundation was laid for liquor theory and practice research.%在传统固态白酒酿造过程中,微生物对白酒的品质、风味起着重要作用.本文概述了浓香型白酒微生物的研究状况,并对其进行分析和展望,提出研究酿酒微生物与风味物质之间关系的重要性.旨在为浓香型白酒生产中酿造微生物的研究提供思路,为白酒理论与实践研究奠定基础.

  2. Pre-desilication and digestion of gibbsitic bauxite with lime in sodium aluminate liquor

    Science.gov (United States)

    Pan, Xiao-lin; Yu, Hai-yan; Dong, Kai-wei; Tu, Gan-feng; Bi, Shi-wen

    2012-11-01

    The effect of lime on the pre-desilication and digestion of gibbsitic bauxite in synthetic sodium aluminate liquor at different temperatures was investigated. The bauxite is comprised of gibbsite, aluminogoethite, hematite, kaolin, quartz, and minor boehmite. Lime increases the desilication efficiency of the bauxite during the pre-desilication process by promoting the conversion of sodalite and cancrinite to hydrogarnet. Desilication reactions during the digestion process promoted by lime result in the loss of Al2O3 entering the red mud, but the amount of aluminogoethite-to-hematite conversion promoted by lime leads to the increase of aluminogoethitic Al2O3 entering the digested liquor. The alumina digestion rate at 245°C is higher than that at 145°C due to the more pronounced conversion of aluminogoethite to hematite. The soda consumption during the digestion process decreases due to lime addition, especially at higher temperatures.

  3. Experimental Research on Removing Suspended Solids and Ammonium Ions from Sludge Liquor

    Directory of Open Access Journals (Sweden)

    Kasparas Gražinskas

    2014-10-01

    Full Text Available The article investigates the processes of removing suspended solids and ammonium ions from sludge liquor. Experimental research was carried out at the Water Management Department laboratory of Vilnius Gediminas Technical University applying an experimental bench made of filters equipped with the zeolites of a different fraction and other appliances. Laboratory testing looked at the use of natural sorbent zeolite for removing ammonium ions from sludge liquor mixing liquid with powdered zeolite and filtering through zeolite filter media. Research was carried out employing the particles of zeolite 1.0–1.5 mm; 2.0–2.5 mm; 2.5–3.15 mm in diameter. The highest efficiency of removing ammonium ions reached 76% and was obtained using zeolite particles 2.0–2.5 mm in diameter.

  4. Value Addition to Sulfate Waste Pickle Liquor of Steel Industry Using Hydrometallurgical Processes

    Science.gov (United States)

    Agrawal, Archana; Sahu, K. K.

    2009-12-01

    The solvent extraction of concentrated acid was investigated from sulfate waste pickle liquors using Cyanex 923 (trialkylphosphine oxide (TRPO); manufactured by Cytec Industries Inc., Woodland Park, NJ; provided by Cyanamid Canada Inc. (Markham, Canada)) as an extractant. The effect of various parameters was studied such as extractant concentration, organic-to-aqueous phase ratio, temperature. and retention time on acid extraction from the waste pickle liquor to the organic phase, After the saturation of the organic phase with sulfuric acid, stripping studies were performed to back-extract the pure acid into the aqueous phase. The raffinate of the solvent extraction process that contains both ferrous and ferric iron as well as trace impurities was subjected to oxidation and hydrothermal treatment to precipitate iron with a well-defined pseudo-cubic morphology and a high coercivity value that renders it suitable for high-grade ferrite production.

  5. PCR-DGGE analysis of the microbial communities in three different Chinese "Baiyunbian" liquor fermentation starters.

    Science.gov (United States)

    Xiong, Xiaomao; Hu, Yuanliang; Yan, Nanfeng; Huang, Yingna; Peng, Nan; Liang, Yunxiang; Zhao, Shumiao

    2014-08-01

    A systematic investigation was performed on the bacterial, Bacillus, fungal, and yeast communities of the three types of Daqu (mechanically prepared, manually prepared, and mixed prepared) used in Baiyunbian Company by reconditioning PCR-denaturing gradient gel electrophoresis (PCR-DGGE). The DGGE results showed that the microbes in the three types of Daqu were mainly thermotolerant and thermophilic microbes, and the most dominant bacterial species were Bacillus and Virgibacillus, followed by Lactobacillus and Trichococcus. Furthermore, the dominant fungi were found to be molds, such as Rasamsonia, Penicillium, Aspergillus, and Monascus, and the dominant yeasts were Saccharomyces cerevisiae, Saccharomycopsis fibuligera, Pichia anomala, and Debaryomyces hansenii. In general, the three types of Daqu showed slight differences in microbial communities, and the Shannon indexes (H') of the manually prepared and mechanically prepared Daqu were similar. The results suggest that mechanically prepared Daqu can replace manually prepared Daqu in liquor production, and this research provides useful information for liquor production and process improvement. PMID:24809292

  6. PROFIL AROMA DAN MUTU SENSORI CITARASA PASTA KAKAO UNGGULAN DARI BEBERAPA DAERAH DI INDONESIA [Aroma and Flavor Sensory Profiles of Superior Cocoa Liquors from Different Regions in Indonesia

    Directory of Open Access Journals (Sweden)

    Intan Kusumaningrum*

    2014-06-01

    Full Text Available The objective of this research was to compare the aroma profiles and flavor sensory qualities of three cocoa liquors obtained from different regions in Indonesia, namely East Java, South Sulawesi and Bali. The Ghanaian cocoa liquor was used as the reference. The aroma of cocoa liquors was extracted by using a Solid Phase Microextraction (SPME, followed by detection with Gas Chromatography-Mass Spectrometry/Olfactometry (GC-MS/O with the Nassal Impact Frequency (NIF method. A total of 28 aroma active compounds in the cocoa liquors were identified, where in 21, 19, 22 and 18 compounds were detected in East Java, Bali, South Sulawesi and Ghana liquors, respectively. The profiles of these three liquors were not only different from one another but were also different from the reference. East Java liquor had a specific aroma of strong chocolate, enriched with creamy, caramel and coffee bean aroma, whileBali liquor was dominated by creamy, caramel and sweet, and South Sulawesi liquor was specified by its sweet green aroma. The aroma sensory characteristic was evaluated by descriptive test, presenting the aroma of nutty, acid, caramel, earthy and chocolate, while the taste sensory attributes included astringency, bitterness and acidity. The sensory profile analysis was carried out by applying a Quantitative Descriptive Analysis (QDA method. Accompired with preference and ranking tests were also conducted. Among the three cocoa liquors, the sensory profile of South Sulawesi was the most similar to that of Ghanaian cocoa liquor. However, the cocoa liquor from Bali and East Java cocoa were more preferred comparing to the liquor from South Sulawesi.

  7. A Fuzzy Multi-attribute Decision Making Method for Sensory Evaluation of Tea Liquor

    OpenAIRE

    Haiping Ren; Wanzhen Liu

    2015-01-01

    The aim of this study is to propose a new sensory evaluation method of tea liquor. Sensory data are usually expressed with linguistic terms, which are more suitable than crisp numbers under this situation. The proposed evaluation method firstly transforms the linguistic terms into triangular fuzzy numbers and then develops an evaluation method based on the concept of TOPSIS. To illustrate the feasibility and practicability of the proposed method, an applied example is given to verify the new ...

  8. Development of hydrometallurgical leaching liquor regeneration process by capture of CO2 from pyrometallurgical flue gas

    OpenAIRE

    Wylock, Christophe; Antunano, Nestor; Arias, Pedro Luis; Haut, Benoît

    2013-01-01

    The steelmaking industry that uses electric arc furnaces (EAF) generates as its main residue EAF dust, which must be treated to recycle Zn, Pb and other metals to prevent environmental impacts. Waelz process is the most common technology for this purpose, generating concentrates of Zn and Pb oxides (called Waelz oxides). One of their many applications is the Zn production in Imperial Smelting furnaces. This work deals with the development of a regeneration process of leaching liquors used in ...

  9. Biocontrol of geosmin-producing Streptomyces spp. by two Bacillus strains from Chinese liquor.

    Science.gov (United States)

    Zhi, Yan; Wu, Qun; Du, Hai; Xu, Yan

    2016-08-16

    Streptomyces spp. producing geosmin have been regarded as the most frequent and serious microbial contamination causing earthy off-flavor in Chinese liquor. It is therefore necessary to control the Streptomyces community during liquor fermentation. Biological control, using the native microbiota present in liquor making, appears to be a better solution than chemical methods. The objective of this study was to isolate native microbiota antagonistic toward Streptomyces spp. and then to evaluate the possible action mode of the antagonists. Fourteen Bacillus strains isolated from different Daqu (the fermentation starter) showed antagonistic activity against Streptomyces sampsonii, which is one of the dominant geosmin producers. Bacillus subtilis 2-16 and Bacillus amyloliquefaciens 1-45 from Maotai Daqu significantly inhibited the growth of S. sampsonii by 57.8% and 84.3% respectively, and effectively prevented the geosmin production in the simulated fermentation experiments (inoculation ratio 1:1). To probe the biocontrol mode, the ability of strain 2-16 and 1-45 to produce antimicrobial metabolites and to reduce geosmin in the fermentation system was investigated. Antimicrobial substances were identified as lipopeptides by ultra-performance liquid chromatography tandem electrospray ionization/quadrupole-time-of-flight mass spectrometry (UPLC-ESI/Q-TOF MS) and in vitro antibiotic assay. In addition, strains 2-16 and 1-45 were able to remove 45% and 15% of the geosmin respectively in the simulated solid-state fermentation. This study highlighted the potential of biocontrol, and how the use of native Bacillus species in Daqu could provide an eco-friendly method to prevent growth of Streptomyces spp. and geosmin contamination in Chinese liquor fermentation.

  10. Neutralization of red mud with pickling waste liquor using Taguchi's design of experimental methodology.

    Science.gov (United States)

    Rai, Suchita; Wasewar, Kailas L; Lataye, Dilip H; Mishra, Rajshekhar S; Puttewar, Suresh P; Chaddha, Mukesh J; Mahindiran, P; Mukhopadhyay, Jyoti

    2012-09-01

    'Red mud' or 'bauxite residue', a waste generated from alumina refinery is highly alkaline in nature with a pH of 10.5-12.5. Red mud poses serious environmental problems such as alkali seepage in ground water and alkaline dust generation. One of the options to make red mud less hazardous and environmentally benign is its neutralization with acid or an acidic waste. Hence, in the present study, neutralization of alkaline red mud was carried out using a highly acidic waste (pickling waste liquor). Pickling waste liquor is a mixture of strong acids used for descaling or cleaning the surfaces in steel making industry. The aim of the study was to look into the feasibility of neutralization process of the two wastes using Taguchi's design of experimental methodology. This would make both the wastes less hazardous and safe for disposal. The effect of slurry solids, volume of pickling liquor, stirring time and temperature on the neutralization process were investigated. The analysis of variance (ANOVA) shows that the volume of the pickling liquor is the most significant parameter followed by quantity of red mud with 69.18% and 18.48% contribution each respectively. Under the optimized parameters, pH value of 7 can be achieved by mixing the two wastes. About 25-30% of the total soda from the red mud is being neutralized and alkalinity is getting reduced by 80-85%. Mineralogy and morphology of the neutralized red mud have also been studied. The data presented will be useful in view of environmental concern of red mud disposal. PMID:22751850

  11. EFFECT OF BORIC ACID ON THE EXTRACTION OF BASTNASITE LEACHING LIQUOR BY CYANEX 923

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    IntroductionIt is known that bastnasite is one of the mainsources of cerium. Bac it is still a problem forhydrometallurgy of bastnasite because of large amountof fluorine in the ore. Fltiorine in the bastnasiteleaching liquor forms precipitation with trivalent rareearths and leads to emulsion. So several roastingprocesses of bastnasite with alkali have been putforward and chelants have been added tO eliminate theinfluence of fluorinell-4]. The general chelant is boricacid. One new process with Cyanex 923151...

  12. Electrochemical treatment of evaporated residue of soak liquor generated from leather industry

    Energy Technology Data Exchange (ETDEWEB)

    Boopathy, R.; Sekaran, G., E-mail: ganesansekaran@gmail.com

    2013-09-15

    Highlights: • Electrochemical treatment of evaporated residue of soak liquor (ERSL) generated in Tannery. • Copper coating on electrode surface and horizontal mounting of electrodes for ERSL treatment. • Electrochemical oxidation of organic pollutants under high saline condition. • The treated solution may be evaporated to dryness to get NaCl salt for hide/skin preservation. -- Abstract: The organic and suspended solids present in soak liquor, generated from leather industry, demands treatment. The soak liquor is being segregated and evaporated in solar evaporation pans/multiple effect evaporator due to non availability of viable technology for its treatment. The residue left behind in the pans/evaporator does not carry any reuse value and also faces disposal threat due to the presence of high concentration of sodium chloride, organic and bacterial impurities. In the present investigation, the aqueous evaporated residue of soak liquor (ERSL) was treated by electrochemical oxidation. Graphite/graphite and SS304/graphite systems were used in electrochemical oxidation of organics in ERSL. Among these, graphite/graphite system was found to be effective over SS304/graphite system. Hence, the optimised conditions for the electrochemical oxidation of organics in ERSL using graphite/graphite system was evaluated by response surface methodology (RSM). The mass transport coefficient (k{sub m}) was calculated based on pseudo-first order rate kinetics for both the electrode systems (graphite/graphite and SS304/graphite). The thermodynamic properties illustrated the electrochemical oxidation was exothermic and non-spontaneous in nature. The calculated specific energy consumption at the optimum current density of 50 mA cm{sup −2} was 0.41 kWh m{sup −3} for the removal of COD and 2.57 kWh m{sup −3} for the removal of TKN.

  13. Enzymes extracted from apple peels have activity in reducing higher alcohols in Chinese liquors.

    Science.gov (United States)

    Han, Qi'an; Shi, Junling; Zhu, Jing; Lv, Hongliang; Du, Shuangkui

    2014-10-01

    As the unavoidable byproducts of alcoholic fermentation, higher alcohols are unhealthy compounds widespread in alcoholic drinks. To investigate the activity of apple crude enzymes toward higher alcohols in liquors, five kinds of apple peels, namely, Fuji, Gala, Golden Delicious, Red Star, and Jonagold, were chosen to prepare enzymes, and three kinds of Chinese liquors, namely, Xifeng (containing 45% ethanol), Taibai (containing 50% ethanol), and Erguotou (containing 56% ethanol), were tested. Enzymes were prepared in the forms of liquid solution, powder, and immobilized enzymes using sodium alginate (SA) and chitosan. The treatment was carried out at 37 °C for 1 h. The relative amounts of different alcohols (including ethanol, 1-propanol, isobutanol, 1-butanol, isoamylol, and 1-hexanol) were measured using gas chromatography (GC). Conditions for preparing SA-immobilized Fuji enzymes (SA-IEP) were optimized, and the obtained SA-IEP (containing 0.3 g of enzyme) was continuously used to treat Xifeng liquor eight times, 20 mL per time. Significant degradation rates (DRs) of higher alcohols were observed at different degrees, and it also showed enzyme specificity according to the apple varieties and enzyme preparations. After five repeated treatments, the DRs of the optimized Fuji SA-IEP remained 70% for 1-hexanol and >15% for other higher alcohols.

  14. 白酒外包装的新应用%New Application of Liquor Packaging

    Institute of Scientific and Technical Information of China (English)

    江贤贵

    2012-01-01

    With the development of the liquor industry,market competition is becoming furious.The homogenization of inner quality has forced the liquor enterprises pay more attention to the product packaging.In order to meet the colorful packaging and outstanding personality requirements,micro-flute box and flexographic printing have been used for liquor packaging and printing.The moderate but quality packaging not only realized the beauty,but also had certain environment value.%随着白酒业的发展,市场竞争也进入了白热化程度,因为内在品质的同质化,迫使各酒企更加重视产品的外包装,为了满足外包装丰富多彩和个性突出的要求,微型楞盒和柔版印刷开始用于白酒包装印刷,而它们的应用既可以实现色美但不唯美、适度但不过度的优质外包装产品,又有一定的环保价值。

  15. Community of environmental streptomyces related to geosmin development in Chinese liquors.

    Science.gov (United States)

    Du, Hai; Lu, Hu; Xu, Yan; Du, Xiaowei

    2013-02-13

    Diverse Streptomyces species act as geosmin producers in the Chinese liquor-making process. In this paper, the ecology of these Streptomyces species was analyzed using denaturing gradient gel electrophoresis (DGGE) of amplified Actinobacteria -specified rDNA. The result showed that Streptomyces were widely distributed during Daqu incubation, and multiple processing, geographic, and climate factors can affect their distribution and diversity. The genes associated with geosmin production were characterized in four geosmin-producing Streptomyces strains, all of which were isolated from geosmin-contaminated Daqu. On the basis of this information, a real-time PCR method was developed, enabling the detection of traces of Streptomyces in complex solid-state matrices. The primer was targeted at the gene coding for geosmin synthase (geoA). The real-time PCR method was found to be specific for geosmin-producing Streptomyces and did not show any cross-reactivity with geosmin-negative isolates, which are frequently present in the Chinese liquor-brewing process. Quantification of geoA in the Chinese liquor-making process could permit the monitoring of the level of geosmin producers prior to the occurrence of geosmin production. Comparison of the qPCR results based on the gene encoding geosmin synthase and Actinobacteria-specified rDNA showed that about 1-10% of the Actinobacteria carry the geosmin synthesis gene.

  16. Pretreatment of spent sulphite liquor via ultrafiltration and nanofiltration for bio-based succinic acid production.

    Science.gov (United States)

    Pateraki, Chrysanthi; Ladakis, Dimitrios; Stragier, Lutgart; Verstraete, Willy; Kookos, Ioannis; Papanikolaou, Seraphim; Koutinas, Apostolis

    2016-09-10

    Ultrafiltration and nanofiltration of spent sulphite liquor (SSL) has been employed to evaluate the simultaneous production of lignosulphonates and bio-based succinic acid using the bacterial strains Actinobacillus succinogenes and Basfia succiniciproducens. Ultrafiltration with membranes of 10, 5 and 3kDa molecular weight cut-off results in significant losses of lignosulphonates (26-50%) in the permeate stream, while nanofiltration using membrane with 500Da molecular weight cut-off results in high retention yields of lignosulphonates (95.6%) in the retentate stream. Fed-batch bioreactor cultures using permeates from ultrafiltrated SSL resulted in similar succinic acid concentration (27.5g/L) and productivity (0.4g/L/h) by both strains. When permeates from nanofiltrated SSL were used, the strain B. succiniciproducens showed the highest succinic acid concentration (33.8g/L), yield (0.58g per g of consumed sugars) and productivity (0.48g/L/h). The nanofiltration of 1t of thick spent sulphite liquor could lead to the production of 306.3kg of lignosulphonates and 52.7kg of succinic acid, whereas the ultrafiltration of 1t of thick spent sulphite liquor using a 3kDa membrane could result in the production of 237kg of lignosulphonates and 71.8kg of succinic acid when B. succiniproducens is used in both cases. PMID:27374402

  17. The Effect of Iron Salt on Anaerobic Digestion and Phosphate Release to Sludge Liquor

    Directory of Open Access Journals (Sweden)

    Svetlana Ofverstrom

    2011-12-01

    Full Text Available Iron salts are used at wastewater treatment plants (WWTPs for several reasons: for removing chemical phosphorus, preventing from struvite formation and reducing the content of hydrogen sulfide (H2S in biogas. Anaerobic digestion is a common scheme for sludge treatment due to producing biogas that could be used as biofuel. Laboratory analysis has been carried out using anaerobic digestion model W8 (Armfield Ltd, UK to investigate any possible effect of adding FeCl3 on the anaerobic digestion of primary sludge (PS and waste activated sludge (WAS mixture as well as on releasing phosphates to digested sludge liquor. The obtained results showed that FeCl3 negatively impacted the anaerobic digestion process by reducing the volume of produced biogas. Fe-dosed sludge (max produced 30% less biogas. Biogas production from un-dosed and Fe-dosed sludge (min was similar to the average of 1.20 L/gVSfed. Biogas composition was not measured during the conducted experiments. Phosphorus content in sludge liquor increased at an average of 38% when digesting sludge without ferric chloride dosing. On the contrary, phosphate content in sludge liquor from digested Fe-dosed sludge decreased by approx. 80%.

  18. [The Near Infrared Spectral Bands Optimal Selection in the Application of Liquor Fermented Grains Composition Analysis].

    Science.gov (United States)

    Xiong, Ya-ting; Li, Zong-peng; Wang, Jian; Zhang, Ying; Wang, Shu-jun; Yin, Jian-jun; Song, Quan-hou

    2016-01-01

    In order to improve the technical level of the rapid detection of liquor fermented grains, in this paper, use near infrared spectroscopy technology to quantitative analysis moisture, starch, acidity and alcohol of liquor fermented grains. Using CARS, iPLS and no information variable elimination method (UVE), realize the characteristics of spectral band selection. And use the multiple scattering correction (MSC), derivative and standard normal variable transformation (SNV) pretreatment method to optimize the models. Establish models of quantitative analysis of fermented grains by PLS, and in order to select the best modeling method, using R2, RMSEP and optimal number of main factors to evaluate models. The results showed that the band selection is vital to optimize the model and CARS is the best optimization of the most significant effect. The calculation results showed that R2 of moisture, starch, acidity and alcohol were 0.885, 0.915, 0.951, 0.885 respectively and RMSEP of moisture, starch, acidity and alcohol were 0.630, 0.519, 0.228, 0.234 respectively. After optimization, the model prediction effect is good, the models can satisfy the requirement of the rapid detection of liquor fermented grains, which has certain reference value in the practical. PMID:27228746

  19. black cat

    Institute of Scientific and Technical Information of China (English)

    杜铁梅

    2016-01-01

    The black cat is a masterpiece of short fiction of Poe. He successfully solved the problem of creating of the horror effect by using scene description, symbol, repetition and first-person narrative methods. And created a complete and unified mysterious terror, achieved the effect of shocking. This paper aims to discuss the mystery in-depth and to enrich the research system in Poe’s novels.

  20. Xylitol production from xylose mother liquor: a novel strategy that combines the use of recombinant Bacillus subtilis and Candida maltosa

    Science.gov (United States)

    2011-01-01

    Background Xylose mother liquor has high concentrations of xylose (35%-40%) as well as other sugars such as L-arabinose (10%-15%), galactose (8%-10%), glucose (8%-10%), and other minor sugars. Due to the complexity of this mother liquor, further isolation of xylose by simple method is not possible. In China, more than 50,000 metric tons of xylose mother liquor was produced in 2009, and the management of sugars like xylose that present in the low-cost liquor is a problem. Results We designed a novel strategy in which Bacillus subtilis and Candida maltosa were combined and used to convert xylose in this mother liquor to xylitol, a product of higher value. First, the xylose mother liquor was detoxified with the yeast C. maltosa to remove furfural and 5-hydromethylfurfural (HMF), which are inhibitors of B. subtilis growth. The glucose present in the mother liquor was also depleted by this yeast, which was an added advantage because glucose causes carbon catabolite repression in B. subtilis. This detoxification treatment resulted in an inhibitor-free mother liquor, and the C. maltosa cells could be reused as biocatalysts at a later stage to reduce xylose to xylitol. In the second step, a recombinant B. subtilis strain with a disrupted xylose isomerase gene was constructed. The detoxified xylose mother liquor was used as the medium for recombinant B. subtilis cultivation, and this led to L-arabinose depletion and xylose enrichment of the medium. In the third step, the xylose was further reduced to xylitol by C. maltosa cells, and crystallized xylitol was obtained from this yeast transformation medium. C. maltosa transformation of the xylose-enriched medium resulted in xylitol with 4.25 g L-1·h-1 volumetric productivity and 0.85 g xylitol/g xylose specific productivity. Conclusion In this study, we developed a biological method for the purification of xylose from xylose mother liquor and subsequent preparation of xylitol by C. maltosa-mediated biohydrogenation of xylose

  1. Xylitol production from xylose mother liquor: a novel strategy that combines the use of recombinant Bacillus subtilis and Candida maltosa

    Directory of Open Access Journals (Sweden)

    Jiang Mingguo

    2011-02-01

    Full Text Available Abstract Background Xylose mother liquor has high concentrations of xylose (35%-40% as well as other sugars such as L-arabinose (10%-15%, galactose (8%-10%, glucose (8%-10%, and other minor sugars. Due to the complexity of this mother liquor, further isolation of xylose by simple method is not possible. In China, more than 50,000 metric tons of xylose mother liquor was produced in 2009, and the management of sugars like xylose that present in the low-cost liquor is a problem. Results We designed a novel strategy in which Bacillus subtilis and Candida maltosa were combined and used to convert xylose in this mother liquor to xylitol, a product of higher value. First, the xylose mother liquor was detoxified with the yeast C. maltosa to remove furfural and 5-hydromethylfurfural (HMF, which are inhibitors of B. subtilis growth. The glucose present in the mother liquor was also depleted by this yeast, which was an added advantage because glucose causes carbon catabolite repression in B. subtilis. This detoxification treatment resulted in an inhibitor-free mother liquor, and the C. maltosa cells could be reused as biocatalysts at a later stage to reduce xylose to xylitol. In the second step, a recombinant B. subtilis strain with a disrupted xylose isomerase gene was constructed. The detoxified xylose mother liquor was used as the medium for recombinant B. subtilis cultivation, and this led to L-arabinose depletion and xylose enrichment of the medium. In the third step, the xylose was further reduced to xylitol by C. maltosa cells, and crystallized xylitol was obtained from this yeast transformation medium. C. maltosa transformation of the xylose-enriched medium resulted in xylitol with 4.25 g L-1·h-1 volumetric productivity and 0.85 g xylitol/g xylose specific productivity. Conclusion In this study, we developed a biological method for the purification of xylose from xylose mother liquor and subsequent preparation of xylitol by C. maltosa

  2. Superparamagnetic cation-exchange adsorbents for bioproduct recovery from crude process liquors by high-gradient magnetic fishing

    DEFF Research Database (Denmark)

    Heebøll-Nielsen, Anders; Justesen, S.F.L; Hobley, Timothy John;

    2004-01-01

    Different routes were screened for the preparation of superparamagnetic cation-exchange adsorbents for the capture of proteins using high-gradient magnetic fishing. Starting from a polyglutaraldehyde-coated base particle, the most successful of these involved attachment of sulphite to oligomers...

  3. Phosphorus recovery from wastewater--expert survey on present use and future potential.

    Science.gov (United States)

    Sartorius, Christan; von Horn, Jana; Tettenborn, Felix

    2012-04-01

    Today, a variety of different approaches to the recovery of phosphorus from wastewater, sludge, and sludge ash exist. These approaches differ basically by the origin of the used matter (wastewater, sludge liquor, fermented or nonfermented sludge ash) and the process (precipitation, wet-chemical extraction, and thermal treatment). To rate them according to their characteristics, the latter were phrased as hypotheses and subjected to an international expert survey. The survey showed that phosphorus recovery is expected to become an established process over the next 20 years in industrialized countries for economic reasons. A decisive aspect in this regard will be the quality of the produced fertilizer. Simple technologies such as the recovery from sludge liquor seem to be preferred. If sludge is incinerated, phosphorus recycling from ash then becomes more interesting and has to be considered. Phosphorus recovery and source-separating sanitation technologies are more appropriate for industrialized countries than for developing countries. Because the growing awareness of environmental issues will prevent sludge from being used agriculturally in an increasing number of countries in the next decade, the market potential for nutrient recovery technologies will increase in the immediate future. PMID:22834219

  4. Xylitol production from xylose mother liquor: a novel strategy that combines the use of recombinant Bacillus subtilis and Candida maltosa

    OpenAIRE

    Jiang Mingguo; Lv Jiyang; Wang Ben; Cheng Hairong; Lin Shuangjun; Deng Zixin

    2011-01-01

    Abstract Background Xylose mother liquor has high concentrations of xylose (35%-40%) as well as other sugars such as L-arabinose (10%-15%), galactose (8%-10%), glucose (8%-10%), and other minor sugars. Due to the complexity of this mother liquor, further isolation of xylose by simple method is not possible. In China, more than 50,000 metric tons of xylose mother liquor was produced in 2009, and the management of sugars like xylose that present in the low-cost liquor is a problem. Results We d...

  5. Membrane Technology for the Recovery of Lignin: A Review

    Science.gov (United States)

    Humpert, Daniel; Ebrahimi, Mehrdad; Czermak, Peter

    2016-01-01

    Utilization of renewable resources is becoming increasingly important, and only sustainable processes that convert such resources into useful products can achieve environmentally beneficial economic growth. Wastewater from the pulp and paper industry is an unutilized resource offering the potential to recover valuable products such as lignin, pigments, and water [1]. The recovery of lignin is particularly important because it has many applications, and membrane technology has been investigated as the basis of innovative recovery solutions. The concentration of lignin can be increased from 62 to 285 g∙L−1 using membranes and the recovered lignin is extremely pure. Membrane technology is also scalable and adaptable to different waste liquors from the pulp and paper industry. PMID:27608047

  6. Synergistic extraction of uranium from Korean black shale ore leach liquors using amine with phosphorous based extractant systems

    International Nuclear Information System (INIS)

    Synergistic extraction of uranium using amine combined with phosphorous based extractant systems was described. The present study focused on the continuous extraction processing of uranium to form precipitation under higher pH conditions and higher aqueous phase ratios. To address this, synergistic extraction studies were carried out with P-based extractants as synergists and investigations were done with better pairs with an amine-based extractant system. Finally, all of the developed synergistic extraction methodologies were compared with each other. This showed that Alamine 336 and D2EHPA was the best pair for uranium extraction, offering as much separation as possible from other associated metals. (author)

  7. Present Development Situations of Low-alcohol Baijiu(Liquor)%低度白酒发展现状

    Institute of Scientific and Technical Information of China (English)

    程平言; 胡峰; 胡建锋; 路虎; 陆伦维

    2015-01-01

    分析了低度白酒的发展趋势,指出低度酒发展中的3个主要问题:失光浑浊、货架期酯水解和标准难适用。重点阐述解决低度白酒相关问题的有效措施,其中冷冻过滤和活性炭吸附都能较好地解决低度白酒的浑浊问题;而延缓酯水解、稳定酒质则需要从以下几方面考虑:高质量的基酒和调味酒、采用酸含量高的酒进行酒体设计、改变酸酯浓度使其接近平衡、低温避光贮存、设定保质期等;并列出了待实施标准中的相关指标变化。最后,从改善工艺技术和引入健康因子等方面思考低度白酒的发展前景。%In this paper, the development trend of low-alcohol Baijiu(liquor), and the three main problems in the development of low-alcohol Baijiu(liquor) including turbidity, ester hydrolysis in shelf period and standard inapplicability were analyzed. Specifically, the effective mea-sures to solve those problems were introduced as follows:freezing filtration and active carbon absorption could settle the problem of liquor tur-bidity, and the measures to delay ester hydrolysis and stabilize liquor quality included the use of high-quality base liquor and flavoring liquor, the design of liquor body by using liquor with high content of acids, and the change of acids/esters concentration to achieve the equilibrium, low-temperature dark storage, and the setting of expiration date etc. Finally, the development foreground of low-alcohol liquor was discussed from the aspects of technical improvement and the introduction of health factors etc.

  8. Integration of pyrolysis and anaerobic digestion--use of aqueous liquor from digestate pyrolysis for biogas production.

    Science.gov (United States)

    Hübner, Tobias; Mumme, Jan

    2015-05-01

    Anaerobic digestion of aqueous pyrolysis liquor derived from pyrolysis of solid digestate was tested in batch mode using an un-adapted inoculum. Three pyrolysis liquors produced at 330°C, 430°C and 530°C in four COD-based concentrations of 3, 6, 12 and 30 g L(-1) were investigated. The three lower concentrations showed considerable biogas production, whereas the 30 g L(-1) dosage caused process inhibition. The highest methane yield of 199.1±18.5 mL g(COD)(-1) (COD removal: 56.9±5.3%) was observed for the 330°C pyrolysis liquor, followed by the 430°C sample with only slightly lower values. The 530°C sample dropped to a yield of 129.3±19.7 mL g(COD)(-1) (COD removal: 36.9±5.6%). Most VOCs contained in the pyrolysis liquor (i.e. furfural, phenol, catechol, guaiacol, and levoglucosan) were reduced below detection limit (cresol by 10-60%). Consequently, integrated pyrolysis and anaerobic digestion in addition to thermochemical conversion of digestate also promises bioconversion of pyrolysis liquors. PMID:25725406

  9. Radionic nonuniform black strings

    Science.gov (United States)

    Tamaki, Takashi; Kanno, Sugumi; Soda, Jiro

    2004-01-01

    Nonuniform black strings in the two-brane system are investigated using the effective action approach. It is shown that the radion acts as a nontrivial hair of the black strings. From the brane point of view, the black string appears as the deformed dilatonic black hole which becomes a dilatonic black hole in the single brane limit and reduces to the Reissner-Nordström black hole in the close limit of two-branes. The stability of solutions is demonstrated using catastrophe theory. From the bulk point of view, the black strings are proved to be nonuniform. Nevertheless, the zeroth law of black hole thermodynamics still holds.

  10. Hydrothermal Conversion of Neutral Sulfite Semi-Chemical Red Liquor into Hydrochar

    Directory of Open Access Journals (Sweden)

    Ramy Gamgoum

    2016-06-01

    Full Text Available Hydrochar was produced from neutral sulfite semi-chemical (NSSC red liquor as a possible bio-based solid fuel for use in power generation facilities. Hydrothermal conversion (HTC experiments were conducted using a fixed liquor-to-water volume ratio of 1:8 and reaction time of 3 h. Solutions were processed using different chemical additives, pH and temperature conditions to determine the optimum conditions required for producing a high energy content solid fuel. The hydrochar samples produced were analyzed by ultimate, thermogravimetric (TGA and Fourier transform infrared spectroscopy (FTIR analyses to determine physicochemical properties that are important for utilization as a fuel. The residual process liquids were also analyzed to better understand the effect of HTC process conditions on their properties. It was determined that the optimum conditions for producing a solid fuel was at a reaction temperature of 250 °C, in the presence of acetic acid at pH 3. The maximum energy content (HHV of the hydrochar produced from red liquor at this condition was 29.87 MJ/kg, and its ash content was 1.12 wt.%. This result reflects the effect of increasing reaction temperature on the physicochemical characteristics of the hydrochar. The increase of HTC temperature significantly reduces the ash content of the hydrochar, leads to a significant increase in the carbon content of the hydrochar, and a reduction in both the oxygen and hydrogen content. These effects suggests an increase in the degree of condensation of the hydrochar products, and consequently the formation of a high energy content material. Based on TGA and FTIR analyses, hydrochars prepared at high HTC temperature showed lower adsorbed moisture, hemicellulose and cellulose contents, with enrichment in content of higher temperature volatiles, such as lignin.

  11. Studies on solar flat plate collector evaporation systems for tannery effluent (soak liquor)

    Institute of Scientific and Technical Information of China (English)

    SRITHAR K.; MANIA.

    2006-01-01

    Heat and mass transfer analysis of an incompressible, laminar boundary layer over solar flat plate collector evaporation systems for tannery effluent (soak liquor) is investigated. The goveming equations are solved for various liquid to air velocity ratios. Profiles of velocity, temperature and concentration as well as their gradients are presented. The heat transfer and mass transfer coefficients thus obtained are used to evaluate mass of water evaporated for an inclined fibre-reinforced plastic (FRP)solar flat plate collector (FPC) with and without cover. Comparison of these results with the experimental performance shows encouraging trend of good agreement between them.

  12. Dynamic modelling of nitrous oxide emissions from three Swedish sludge liquor treatment systems

    DEFF Research Database (Denmark)

    Lindblom, E.; Arnell, M.; Flores-Alsina, X.;

    2014-01-01

    ) a moving-bed biofilm reactor. Results show that the calibrated model is partly capable of reproducing the behaviour of N2O as well as the nitritation/nitrification/denitrification dynamics. However, the results emphasize that additional work is required before N2O emissions from sludge liquor treatment...... production by both heterotrophic and autotrophic denitrification. In addition, mass transfer equations are implemented to characterize the dynamics of N2O in the water and the gas phases.The biochemical model is simulated and validated for two hydraulic patterns: (1) a sequencing batch reactor; and, (2...

  13. Dynamic modelling of nitrous oxide emissions from three Swedish sludge liquor treatment systems

    DEFF Research Database (Denmark)

    Lindblom, E.; Arnell, M.; Flores-Alsina, X.;

    2016-01-01

    ) a moving-bed biofilm reactor. Results show that the calibrated model is partly capable of reproducing the behaviour of N2O as well as the nitritation/nitrification/denitrification dynamics. However, the results emphasize that additional work is required before N2O emissions from sludge liquor treatment...... production by both heterotrophic and autotrophic denitrification. In addition, mass transfer equations are implemented to characterize the dynamics of N2O in the water and the gas phases.The biochemical model is simulated and validated for two hydraulic patterns: (1) a sequencing batch reactor; and, (2...

  14. Otobasal liquor fistula causing recurrent bacterial meningitis; Otobasale Liquorfistel als Ursache einer rezidivierenden bakteriellen Meningitis

    Energy Technology Data Exchange (ETDEWEB)

    Doege, H. [Abteilung fuer Nuklearmedizin, Leipzig Univ. (Germany); Klinghammer, A.; Elix, H. [Klinik fuer Kinder- und Jugendmedizin, Leipzig Univ. (Germany); Pilz, D. [Institut fuer Bildgebende Diagnostik der Klinikum Chemnitz gGmbH (Germany); Bootz, F. [Klinik und Poliklinik fuer Hals-Nasen-Ohren-Heilkunde/ Plastische Operationen, Leipzig Univ. (Germany)

    2000-07-01

    Cerebral subarachnoid space scintigraphy today still is the modality of choice for detection of a liquorrea or a liquor fistula, especially in the case of a recurrent menengitis of unclear origin. This diagnostic method yielded the results required in the case reported for efficient and successful surgical treatment. (orig./CB) [German] Die zerebrale Liquorraumszintigraphie ist aufgrund der hohen Empfindlichkeit auch heute noch die Methode der Wahl zum Nachweis einer Liquorrhoe beziehungsweise einer Liquorfistel, insbesondere bei einer rezidivierenden Meningitis unklarer Genese. Sie ermoeglichte bei unserer Patientin eine gezielte definitive operative Behandlung. (orig.)

  15. Method of extracting copper sulfate from waste residue and waste liquor containing copper%从含铜废渣废液中提取硫酸铜的方法研究

    Institute of Scientific and Technical Information of China (English)

    曾琦斐

    2012-01-01

    研究从含铜废渣、废液中提取硫酸铜的方法,以减少污染、回收资源.利用含铜废渣、废液生产海绵铜,再通过置换、氧化、酸化、结晶以及重结晶等步骤制备五水硫酸铜晶体.通过上述方法由含铜废渣、废液制备出硫酸铜晶体.该方法所用设备简单,操作简便,铜的回收率高,硫酸铜产品质量达到化学纯(CP)等级.%In order to reduce pollution and recycle the resources,a method of extracting copper sulfate from waste residue and waste liquor containing copper was explored. Spongy copper was produced from waste residue and waste liquor containing copper,and then copper sulphate pentahydrate crystal was produced after the steps of displacing, oxidizing,acidifying, crystallizing, and recrystallizing. Copper sulfate crystal was produced by the above-mentioned method. This method had advantages, such as simple equipment, easy operation, and high recovery rate of copper. Product quality of copper sulfate is up to chemical reagents grade.

  16. Black Urine

    Directory of Open Access Journals (Sweden)

    Rahim Vakili

    2016-06-01

    Full Text Available A 2-year-old boy was born at term of healthy, non-consanguineous Iranian parents. His mother attended in the clinic with the history of sometimes discoloration of diapers after passing urine. She noticed that first at the age of one month with intensified in recent months. His Physical examination and growth parameters were normal. His mother denied taking any medication (sorbitol, nitrofurantoin, metronidazole, methocarbamol, sena and methyldopa (5. Qualitative urine examination showed dark black discoloration. By this history, alkaptonuria was the most clinical suspicious. A 24-hour-urine sample was collected and sent for quantitative measurements. The urine sample was highly positive for homogentisic acid and negative for porphyrin metabolites.

  17. Electronic nose with a new feature reduction method and a multi-linear classifier for Chinese liquor classification

    International Nuclear Information System (INIS)

    An electronic nose (e-nose) was designed to classify Chinese liquors of the same aroma style. A new method of feature reduction which combined feature selection with feature extraction was proposed. Feature selection method used 8 feature-selection algorithms based on information theory and reduced the dimension of the feature space to 41. Kernel entropy component analysis was introduced into the e-nose system as a feature extraction method and the dimension of feature space was reduced to 12. Classification of Chinese liquors was performed by using back propagation artificial neural network (BP-ANN), linear discrimination analysis (LDA), and a multi-linear classifier. The classification rate of the multi-linear classifier was 97.22%, which was higher than LDA and BP-ANN. Finally the classification of Chinese liquors according to their raw materials and geographical origins was performed using the proposed multi-linear classifier and classification rate was 98.75% and 100%, respectively

  18. Electronic nose with a new feature reduction method and a multi-linear classifier for Chinese liquor classification

    Energy Technology Data Exchange (ETDEWEB)

    Jing, Yaqi; Meng, Qinghao, E-mail: qh-meng@tju.edu.cn; Qi, Peifeng; Zeng, Ming; Li, Wei; Ma, Shugen [Tianjin Key Laboratory of Process Measurement and Control, Institute of Robotics and Autonomous Systems, School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China)

    2014-05-15

    An electronic nose (e-nose) was designed to classify Chinese liquors of the same aroma style. A new method of feature reduction which combined feature selection with feature extraction was proposed. Feature selection method used 8 feature-selection algorithms based on information theory and reduced the dimension of the feature space to 41. Kernel entropy component analysis was introduced into the e-nose system as a feature extraction method and the dimension of feature space was reduced to 12. Classification of Chinese liquors was performed by using back propagation artificial neural network (BP-ANN), linear discrimination analysis (LDA), and a multi-linear classifier. The classification rate of the multi-linear classifier was 97.22%, which was higher than LDA and BP-ANN. Finally the classification of Chinese liquors according to their raw materials and geographical origins was performed using the proposed multi-linear classifier and classification rate was 98.75% and 100%, respectively.

  19. Complex microbiota of a Chinese "Fen" liquor fermentation starter (Fen-Daqu), revealed by culture-dependent and culture-independent methods

    NARCIS (Netherlands)

    Zheng, X.; Zheng, Y.; Han, B.; Zwietering, M.H.; Samson, R.A.; Boekhout, T.; Nout, M.J.R.

    2012-01-01

    Daqu is a traditional fermentation starter that is used for Chinese liquor production. Although partly mechanized, its manufacturing process has remained traditional. We investigated the microbial diversity of Fen-Daqu, a starter for light-flavour liquor, using combined culture-dependent and culture

  20. Complex microbiota of a Chinese "Fen" liquor fermentation starter (Fen-Daqu), revealed by culture-dependent and culture-independent methods

    NARCIS (Netherlands)

    Zheng, X.W.; Yan, Z.; Han, B.Z.; Zwietering, M.H.; Samson, R.A.; Boekhout, T.; Nout, M.J.R.

    2012-01-01

    Daqu is a traditional fermentation starter that is used for Chinese liquor production. Although partly mechanized, its manufacturing process has remained traditional. We investigated the microbial diversity of Fen- Daqu, a starter for light-flavour liquor, using combined culture-dependent and cultur

  1. Black Silicon Solar Cells with Black Ribbons

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io;

    2016-01-01

    We present the combination of mask-less reactive ion etch (RIE) texturing and blackened interconnecting ribbons as a method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon made by mask-less reactive ion etching has total, average...... in the range 15.7-16.3%. The KOH-textured reference cell had an efficiency of 17.9%. The combination of black Si and black interconnecting ribbons may result in aesthetic, all-black panels based on conventional, front-contacted silicon solar cells....... reflectance below 0.5% across a 156x156 mm2 silicon (Si) wafer. Black interconnecting ribbons were realized by oxidizing copper resulting in reflectance below 3% in the visible wavelength range. Screen-printed Si solar cells were realized on 156x156 mm2 black Si substrates with resulting efficiencies...

  2. Noncommutative black holes

    International Nuclear Information System (INIS)

    We study noncommutative black holes, by using a diffeomorphism between the Schwarzschild black hole and the Kantowski-Sachs cosmological model, which is generalized to noncommutative minisuperspace. Through the use of the Feynman-Hibbs procedure we are able to study the thermodynamics of the black hole, in particular, we calculate Hawking's temperature and entropy for the 'noncommutative' Schwarzschild black hole

  3. Black Entrepreneurship in America.

    Science.gov (United States)

    Green, Shelley; Pryde, Paul

    The economic condition of black Americans is discussed, proceeding from the assumption that black economic progress does not depend on a renewed struggle for unobtained civil rights, but rather on the creative response of black Americans to economic opportunity and problems. In the long run, black economic development must rely on the…

  4. Production of red pigments by Monascus ruber in culture media containing corn steep liquor

    Directory of Open Access Journals (Sweden)

    P. S. Hamano

    2006-12-01

    Full Text Available The production of red pigments by Monascus ruber was evaluated utilizing complex culture media composed of glucose or sucrose (10 g/L, corn steep liquor (5 or 10 g/L and monosodium glutamate (0, 5.0, 7.6, 11.4 or 15.2 g/L. Medium containing 10 g/L glucose, 5 g/L corn steep liquor and 7.6 g/L monosodium glutamate resulted the highest values of extracellular red pigment absorbance (20.7 U and productivity (0.35 U/h. This medium also produced better results than using semi-synthetic medium with analytical grade reagents (12.4 U and 0.21 U/h. The cell growth was similar in both media (X @ 6.5 g/L, indicating that the capacity of the cells to produce red pigments was higher in complex culture media. In addition, in the complex culture medium, less of the intracellular red pigments accumulated than in semi-synthetic medium (9.1% and 30%, respectively.

  5. Investigating the potential of thermophilic species for ethanol production from industrial spent sulfite liquor

    Directory of Open Access Journals (Sweden)

    Michaela Weissgram

    2015-10-01

    Full Text Available Thermophilic microorganisms hold a great potential for bioethanol production on waste biomass, due to their ability to utilize pentoses and hexoses alike. However, to date hardly any data on thermophiles growing directly on industrial substrates like spent sulfite liquor (SSL are available. This contribution investigates the ability of Thermoanaerobacter species to utilize the main sugars in the used SSL (mannose, glucose and xylose and the effect of process parameters (pH, temperature and sugar concentration on their growth. Based on these results the strain T. mathranii was chosen for further studies. The ability of T. mathranii to grow directly on SSL was investigated and the effect of several inhibiting substances on growth was elucidated. Furthermore it was tested whether pretreatment with activated charcoal can increase the fermentability of SSL. The fermentations were evaluated based on yields and specific rates. It could be shown that T. mathranii was able to ferment all sugars in the investigated softwood SSL and fermented diluted, untreated SSL (up to 2.7% (w/w dry matter. Pretreatment with activated charcoal could slightly reduce the amount of phenols in the substrate and thus facilitate growth and ethanol production on higher SSL concentrations (up to 4.7% (w/v dry matter. Ethanol yields of 0.29-0.44 Cmmol of ethanol per Cmmol sugar were obtained on untreated and pretreated spent sulfite liquor, respectively. These results on an industrial substrate strengthen the claim that thermophilic microorganisms might be the optimal candidates for forest biorefinery.

  6. Fast high-pressure freezing of protein crystals in their mother liquor

    International Nuclear Information System (INIS)

    Protein crystals were vitrified using high-pressure freezing in their mother liquor at 210 MPa and 77 K without cryoprotectants or oil coating. The method was successfully applied to photosystem II, which is representative of a membrane protein with a large unit cell and weak crystal contacts. High-pressure freezing (HPF) is a method which allows sample vitrification without cryoprotectants. In the present work, protein crystals were cooled to cryogenic temperatures at a pressure of 210 MPa. In contrast to other HPF methods published to date in the field of cryocrystallography, this protocol involves rapid sample cooling using a standard HPF device. The fast cooling rates allow HPF of protein crystals directly in their mother liquor without the need for cryoprotectants or external reagents. HPF was first attempted with hen egg-white lysozyme and cubic insulin crystals, yielding good to excellent diffraction quality. Non-cryoprotected crystals of the membrane protein photosystem II have been successfully cryocooled for the first time. This indicates that the presented HPF method is well suited to the vitrification of challenging systems with large unit cells and weak crystal contacts

  7. Recovery of molybdenum values from dilute solutions

    International Nuclear Information System (INIS)

    A process is described for concentrating the molybdenum values in an aqueous ammoniacal leach liquor. Ferrous ions are added to the liquor in sufficient quantities to saturate the leach liquor and provide an excess sufficient to precipitate a solid complex whose approximate Fe/Mo ratio is 3.5 or greater. The molybdenum values thereinare precipitated as a ferrous hydroxide ammonium molybdate complex. The molybdenum containing precipitate is separated from the aqueous liquor. Acid is added to the separated molybdenum containing precipitate to resolubilize the molybdenum values

  8. Heart Attack Recovery FAQs

    Science.gov (United States)

    ... Pressure High Blood Pressure Tools & Resources Stroke More Heart Attack Recovery FAQs Updated:Aug 24,2016 Most people ... recovery. View an animation of a heart attack . Heart Attack Recovery Questions and Answers What treatments will I ...

  9. Determinations in the Production of Baijiu(Liquor)(XXⅢ):Baijiu(Liquor) Safety Detection(ContinueⅡ)%白酒生产检验(二十三):白酒食品安全检测(续二)

    Institute of Scientific and Technical Information of China (English)

    李大和; 王超凯; 李国红; 彭奎

    2015-01-01

    In this paper, the detection methods of Baijiu(liquor) safety indicators such as acesulfame potassium, aspartame, and phthalate were introduced.(Trans. by YUE Yang)%介绍白酒食品安全指标中安赛蜜、阿斯巴甜、邻苯二甲酸酯(塑化剂)的检测方法.

  10. The Black Black Woman and the Black Middle Class.

    Science.gov (United States)

    Jeffers, Trellie

    1981-01-01

    Reprint of a 1973 article that describes the discrimination that particularly dark-skinned Black women suffer, especially at the hands of a color-conscious Black middle class. Calls for dark women to look to the African appearance and working-class roots as sources of pride and strength. (GC)

  11. Use of corn steep liquor as an economical nitrogen source for biosuccinic acid production by Actinobacillus succinogenes

    Science.gov (United States)

    Tan, J. P.; Jahim, J. M.; Wu, T. Y.; Harun, S.; Mumtaz, T.

    2016-06-01

    Expensive raw materials are the driving force that leads to the shifting of the petroleum-based succinic acid production into bio-based succinic acid production by microorganisms. Cost of fermentation medium is among the main factors contributing to the total production cost of bio-succinic acid. After carbon source, nitrogen source is the second largest component of the fermentation medium, the cost of which has been overlooked for the past years. The current study aimed at replacing yeast extract- a costly nitrogen source with corn steep liquor for economical production of bio-succinic acid by Actinobacillus succinogenes 130Z. In this study, a final succinic acid concentration of 20.6 g/L was obtained from the use of corn steep liquor as the nitrogen source, which was comparable with the use of yeast extract as the nitrogen source that had a final succinate concentration of 21.4 g/l. In terms of economical wise, corn steep liquor was priced at 200 /ton, which was one fifth of the cost of yeast extract at 1000 /ton. Therefore, corn steep liquor can be considered as a potential nitrogen source in biochemical industries instead of the costly yeast extract.

  12. Surface Layer Properties of Dough Liquor Components: Are They Key Parameters in Gas Retention in Bread Dough?

    NARCIS (Netherlands)

    Primo Martin, C.; Hamer, R.J.; Jongh, de H.H.J.

    2006-01-01

    Gas cell stability during bread making is controlled by both surface and bulk properties. This paper is focused on studying the surface properties of the water-soluble phase of the dough, the dough liquor (with and without lipids), as well as the composition of the air/water interface. Using infrare

  13. 谈白酒的感官评价体系%Discussion on System of Liquor Sensory Evaluation

    Institute of Scientific and Technical Information of China (English)

    张锋国

    2012-01-01

    The content of scientific process,standardization and specialization of liquor sensory evaluation and its practical application were introduced.%介绍了白酒感官评价的科学化、标准化及专业化的内容及在实际评价中的应用。

  14. Analysis on the Research and Development of Tea Liquor%浅析茶酒的研制与发展

    Institute of Scientific and Technical Information of China (English)

    周才碧; 张敏星; 穆瑞禄; 陈文品

    2014-01-01

    Tea Liquor is a health drink with tea as the main raw material after extraction, fermentation, filtration, aging and blending, mixing process. Tea Liquor with the abundant compositions of polysaccharide, tea polyphenols, caffeine and amino acid, has nourishment, health care and medical treatment, and other functions. This paper was reviewed from the aspects of tea liquor composition, function, process and type as well as existed problems in order to provide some reference for the development of tea liquor scale, standardization and health.%茶酒以茶叶为主要原料,经浸提、发酵、过滤、陈酿和调配等工艺制作而成的一种保健饮品,富含多糖、茶多酚、咖啡碱和氨基酸等成分,具有营养、保健和医疗等功能。本文主要从茶酒的成分、功效、工艺和类型以及存在的问题等方面进行综述,以期为茶酒的发展规模化、标准化和健康化提供参考。

  15. 78 FR 15970 - Cedarville Rancheria-Liquor Licensing Ordinance of the Cedarville Rancheria, Ordinance No. 2012-05

    Science.gov (United States)

    2013-03-13

    ... otherwise. The term shall also include the businesses of the Tribe. It shall be interchangeable in this.... The Executive Committee shall have the authority to issue the following types of liquor licenses... matters connected therewith which may affect the public welfare and morals. The Executive Committee...

  16. Amniotic fluid index, non-stress test and color of liquor: as a predictor of perinatal outcome

    Directory of Open Access Journals (Sweden)

    Ruma Sarkar Anand

    2016-10-01

    Conclusions: AFI, NST and color of liquor can effectively detect fetal distress already present at admission, thereby avoiding unnecessary delay and decrease in decision to delivery time and improve fetal outcome. [Int J Reprod Contracept Obstet Gynecol 2016; 5(10.000: 3512-3517

  17. A new process and equipment for waste minimization: Conversion of NO(x) scrubber liquor to fertilizer

    Science.gov (United States)

    Parrish, Clyde F.; Barile, Ronald G.; Gamble, Paul H.; Lueck, Dale E.; Young, Rebecca C.

    1995-01-01

    A new emissions control system for the oxidizer scrubbers that eliminates the current oxidizer liquor waste and lowers the NO(x) emissions is described. Since fueling and deservicing spacecraft constitute the primary operations in which environmental emissions occur, this will eliminate the second largest waste stream at KSC. This effort is in accord with Executive Order No. 12856 (Federal Compliance with Right-to-Know Laws and Pollution Prevention Requirements, data 6 Aug. 1993) and Executive Order No. 12873 (Federal Acquisition, Recycling, and Waste Prevention, dated 20 Oct. 1993). A recent study found that the efficiencies of the oxidizer scrubbers during normal operations ranged from 70 percent to 99 percent. The new scrubber liquor starts with 1% hydrogen peroxide at a pH of 7 and the process control system adds hydrogen peroxide and potassium hydroxide to the scrubber liquor to maintain those initial conditions. The result is the formation of a solution of potassium nitrate, which is sold as a fertilizer. This report describes the equipment and procedures used to monitor and control the conversion of the scrubber liquor to fertilizer, while reducing the scrubber emissions.

  18. Improved ethyl caproate production of Chinese liquor yeast by overexpressing fatty acid synthesis genes with OPI1 deletion.

    Science.gov (United States)

    Chen, Yefu; Luo, Weiwei; Gong, Rui; Xue, Xingxiang; Guan, Xiangyu; Song, Lulu; Guo, Xuewu; Xiao, Dongguang

    2016-09-01

    During yeast fermentation, ethyl esters play a key role in the development of the flavor profiles of Chinese liquor. Ethyl caproate, an ethyl ester eliciting apple-like flavor, is the characteristic flavor of strong aromatic liquor, which is the best selling liquor in China. In the traditional fermentation process, ethyl caproate is mainly produced at the later fermentation stage by aroma-producing yeast, bacteria, and mold in a mud pit instead of Saccharomyces cerevisiae at the expense of grains and fermentation time. To improve the production of ethyl caproate by Chinese liquor yeast (S. cerevisiae) with less food consumption and shorter fermentation time, we constructed three recombinant strains, namely, α5-ACC1ΔOPI1, α5-FAS1ΔOPI1, and α5-FAS2ΔOPI1 by overexpressing acetyl-CoA carboxylase (ACC1), fatty acid synthase 1 (FAS1), and fatty acid synthase 2 (FAS2) with OPI1 (an inositol/choline-mediated negative regulatory gene) deletion, respectively. In the liquid fermentation of corn hydrolysate, the contents of ethyl caproate produced by α5-ACC1ΔOPI1, α5-FAS1ΔOPI1, and α5-FAS2ΔOPI1 increased by 0.40-, 1.75-, and 0.31-fold, correspondingly, compared with the initial strain α5. The contents of other fatty acid ethyl esters (FAEEs) (C8:0, C10:0, C12:0) also increased. In comparison, the content of FAEEs produced by α5-FAS1ΔOPI1 significantly improved. Meanwhile, the contents of acetyl-CoA and ethyl acetate were enhanced by α5-FAS1ΔOPI1. Overall, this study offers a promising platform for the development of pure yeast culture fermentation of Chinese strong aromatic liquor without the use of a mud pit. PMID:27344573

  19. On Artistic Conception of Liquor Packaging Design%论白酒包装设计的审美意境

    Institute of Scientific and Technical Information of China (English)

    高源

    2014-01-01

    分析了意境的概念、白酒包装设计审美意境的特征,以及白酒包装审美意境在营销和消费中的功能。在此基础上从材料、图片、色彩、造型四个方面探讨了如何从传统艺术中汲取精髓,营造白酒包装的审美意境,增强包装的传达效果,设计出实用和审美,商业和艺术相结合的白酒包装。以提升品牌的竞争力,展现品牌特色;同时为现代白酒包装设计提供有益的指导。%Based on the analysis of the concept of artistic conception , liquor packaging design aesthetic features of artistic conception as well as the aesthetic artistic conception in the marketing and consumption of liquor packaging , the author discusses material , pictures , color , modeling and presents some ideas on how to derive the essence from traditional art , build the aesthetic artistic conception of liquor packaging , enhance the convey effect of packaging , design a practical and aesthetic and combines business and art of liquor packaging in order to enhance the competitiveness of the brand , brand characteristics and at the same time provide useful guidance for the modern liquor packaging design .

  20. The effects of bleach plant effluent recycle in kraft mill green liquors

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, B.M.; Uloth, V.C. [Pulp and Paper Research Inst. of Canada, Vancouver, BC (Canada); Dorris, G.M. [Pulp and Paper Research Inst. of Canada, Pointe Claire, PQ (Canada); Stafford, E. C.

    1995-12-31

    A new approach to reducing or eliminating effluent flows from a kraft mill through process changes and by recycling, was presented. A closed system experiment was conducted in which bleach plant effluents and green liquors were used to simulate effluent recycling to the recausticizing area in place of fresh water. Results showed that with current levels of water use, acid effluents from bleaching of softwood pulp could be recycled to the recausticizing area if a 5-18 per cent loss in causticizing efficiency and a 10 per cent decrease in the lime mud settling rate was tolerable. High levels of sodium chloride did not always reduce causticizing efficiency. It was found that bleach plant water usage was very high in the plants studied. New ways to minimize water use in the plant must be found if a significant degree of closure is to be achieved. 15 refs., 6 tabs., 8 figs.

  1. Influence of Molecular Interaction on Crystallization Behavior of Glycine from Mother Liquor

    Institute of Scientific and Technical Information of China (English)

    TAO Chang-yuan; LI Ming-song; FAN Xing; LIU Zuo-hua; DU Jun

    2011-01-01

    The mother liquor for preparing industrial HCN was investigated,to analyze the side-products' structure and influence of molecular interactions of side-products with glycine and solvent on the glycine's crystallization process.The side-products(SPs)were super-branched oligmers with plenty of hydrophilic groups,which could affect the crystallization process by interactions such as hydrogen bond.Alcohol-water mixed solvent with different polyols could be used to weaken the SPs-glycine interaction and strengthen the SPs-water interaction,which help to improve the crystallization efficiency and purity.After optimization,SPs' mass fraction in glycine could be reduced by 80%and the morphology of crystal particles could also be improved.

  2. Extraction of niobium from sulfate leach liquor of Egyptian ore sample by triazoloquinazolinone

    Institute of Scientific and Technical Information of China (English)

    O. M. EL HUSSAINI

    2009-01-01

    The refractory niobium bearing minerals, Samarskite, Fergusonite, Betafite and Pyrochlore of the ore sample obtained from Kadabora, Egypt, was subjected to sulfuric acid leaching using acid concentrations varied from 17.6 to 4.5 mol/ L. The extraction of niobium from the sulfate leach liquors was done using the synthesized 8,9-dihydro[1,2,4]triazolo[1,5-a]quinazolin- 6(7H)-one dissolved in methylene chloride. It has been found that extraction efficiency of 84% was achieved by contacting equal volumes of 0.32% extractant with 4.5 mol/L sulfate solution for 15 min. The stripping was performed by 0.5 mol/L HF with efficiency of 86.7%.

  3. Comparison between mixed liquors of two side-stream membrane bioreactors treating wastewaters from waste management plants with high and low solids anaerobic digestion.

    Science.gov (United States)

    Zuriaga-Agustí, E; Mendoza-Roca, J A; Bes-Piá, A; Alonso-Molina, J L; Fernández-Giménez, E; Álvarez-Requena, C; Muñagorri-Mañueco, F; Ortiz-Villalobos, G

    2016-09-01

    In the last years, biological treatment plants for the previously separated organic fraction from municipal solid wastes (OFMSW) have gained importance. In these processes a liquid effluent (liquid fraction from the digestate and leachate from composting piles), which has to be treated previously to its discharge, is produced. In this paper, the characteristics of the mixed liquor from two full-scale membrane bioreactors treating the effluents of two OFMSW treatment plants have been evaluated in view to study their influence on membrane fouling in terms of filterability. For that, the mixed liquor samples have been ultrafiltrated in an UF laboratory plant. Besides, the effect of the influent characteristics to MBRs and the values of the chemical and physical parameters of the mixed liquors on the filterability have been studied. Results showed that the filterability of the mixed liquor was strongly influenced by the soluble microbial products in the mixed liquors and the influent characteristics to MBR. Permeate flux of MBR mixed liquor treating the most polluted wastewater was considerable the lowest (around 20 L/m(2) h for some samples), what was explained by viscosity and soluble microbial products concentration higher than those measured in other MBR mixed liquor. PMID:27235772

  4. HPLC-MS测定白酒中氨基甲酸酯类农药残留%Determination of carbamates pesticides in liquor by HPLC/MS

    Institute of Scientific and Technical Information of China (English)

    谭文渊; 袁东; 付大友; 李艳清; 王蓉

    2012-01-01

    A HPLC/MS method has been established for the determination of ten carbamates pesticides in liquor. The chromatographic conditions are as follows: Column of Phenomenex-Luna CN 100 A(250 mm×.6 mm×5 pm), and mobile phase was acetonitrile-water(20:80-80:20 within 40 minutes), flow rate was 1.0 mL/min, wavelength was 195 nm, column temperature was 25 ℃ and the injection volume was 20 μl.. MS conditions: Scanning range is 50-350 m/z, temperature of drying gas is 350 %, flow rate of drying gas is 8.0 mL/min, pressure of the evaporative gas is 275.86 kPa. The liquor samples were treated by SPE(solid phase extraction, NH2) and then concentrated by nitrogen-blow. Results showed that the standard curves of ten carbamates were linear over the quality range of 0.05-3 μg/mL, the correlation coefficient r were over 0.99. The average recovery of carbamates were 72.6%-97.6%, RSD were 2.6%-5.9%. Conclusion: this method was accurate, rapid, sensitive for the determination of carbamates pesticides in liquor by HPLC/MS.%建立了一种同时对白酒中10种氨基甲酸酯类农药残留的HPLC-MS测定方法。色谱条件:色谱柱Phenomenex-LunaCN100A(250mm×4.6mm×5μm),流动相乙腈-水(在40min内乙腈由20%变为80%),流速1.00mL/min,检测波长195nm,柱温25℃,进样量20μL。质谱条件:电喷雾离子源(ESI+源),扫描范围(m/z)为50~350,干燥气温度350℃,干燥气流速8.0mL/min,雾化气压力275.86kPa。样品制备:白酒样品用固相萃取处理后,氮吹浓缩,乙腈定容至2mL。结果表明,10种氨基甲酸酯类农药残留在0.05~3μg范围积线性关系良好,相关系数R2〉0.99。平均回收率在72.6%和97.6%,RSD在2.6%~5.9%之间。结论:方法灵敏度高、操作简便、结果准确,可用于酒样中痕量农药残留的含量测定。

  5. The Factors Influencing Liquor Drinking Comfort Degree & The Solutions%白酒饮用舒适度的影响因素及应对措施

    Institute of Scientific and Technical Information of China (English)

    童国强; 杨强; 乐细选

    2011-01-01

    饮酒是工作交往、情感交流、亲情表现、休闲享受的表示形式,要求饮用后既要满足关好的享受,又不至于影响工作,影响健康。影响白酒饮用舒适度的因素有:乙醇的麻醉作用、乙醛引起的脑缺氧、杂醇油的影响、卫生指标超标、酒精含量的高低、酸酯平衡等。提高白酒饮用舒适度的措施有:加强生产工艺监控、适当延长白酒的陈酿期、精心勾调、保持良好的口感、提高白酒中的呈香呈味物质、适当开发中低度白酒。%Drinking is quite common in business discussion, social communication, and pastime. Ideally, people could enjoy drinking and drinking would not influence people's work and people's health. The factors influencing liquor drinking comfort degree include anesthesia and cerebral anoxia induced by alcohol, fusel oil toxicity, hygienic indexes exceeding the standards, liquor alcoholicity, and the equilibrium between esters and acids in liquor. The relative solutions to improve liquor drinking comfort degree include strengthening monitoring liquor-making techniques, pro- longing liquor aging period appropriately, careful liquor blending, enhancing aroma-producing and flavor-producing compositions in liquor, and the development oflow-alcoholicity liquor.

  6. Recovery of enriched uranium from waste solution obtained from fuel manufacture laboratories

    International Nuclear Information System (INIS)

    Reversed-phase partition chromatography is shown to be a convenient and applicable method for the quantitative recovery of microgram to gram quantities of Uranium (19.7% enriched with 235U) from highly impure solution. The processing of Uranium compounds for atomic energy project especially in FMPP (fuel manufacture pilot plant) gives rise to a variety of wastes in which the Uranium content is of considerable importance. The recovery of Uranium from concentrated mother liquors produced from ADU (ammonium diuranate) precipitation, as well as those due to ADU washing is studied in this work. Column of Poly-trifluoro-monochloro-ethylene (Kel-F) supporting tri-n-butyl-phosphate (TBP) retains Uranium. Impurities are eluted with 6.5 M HCl, and the Uranium is eluted with water and the recovery of Uranium is better than 94%. (author)

  7. High-Zinc Recovery from Residues by Sulfate Roasting and Water Leaching

    Science.gov (United States)

    Hu, Ming; Peng, Bing; Chai, Li-yuan; Li, Yan-chun; Peng, Ning; Yuan, Ying-zhen; Chen, Dong

    2015-09-01

    An integrated process for the recovery of zinc that is generated from zinc hydrometallurgy in residues was developed. A mixture of residue and ferric sulfate was first roasted to transform the various forms of zinc in the residue, such as ferrite, oxide, sulfide, and silicate, into zinc sulfate. Next, water leaching was conducted to extract the zinc while the iron remained in the residue as ferric oxide. The effects of the roasting and leaching parameters on zinc recovery were investigated. A maximum zinc recovery rate of 90.9% was achieved for a mixture with a ferric sulfate/residue weight ratio of 0.05 when roasting at 640°C for 30 min before leaching with water at room temperature for 20 min using a liquid/solid ratio of 10. Only 0.13% of the iron was dissolved in the water. Thus, the leaching liquor could be directly returned for zinc smelting.

  8. Distribution ratios on Dowex 50W resins of metal leached in the caron nickel recovery process

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, B.A.; Metsa, J.C.; Mullins, M.E.

    1980-05-01

    Pressurized ion exchange on Dowex 50W-X8 and 50W-X12 resins was investigated using elution techniques to determine distribution ratios for copper, nickel, and cobalt complexes contained in ammonium carbonate solution, a mixture which approximates the waste liquor from the Caron nickel recovery process. Results were determined for different feed concentrations, as well as for different concentrations and pH values of the ammonium carbonate eluant. Distribution ratios were compared with those previously obtained from a continuous annular chromatographic system. Separation of copper and nickel was not conclusively observed at any of the conditions examined.

  9. The Black Studies Boondoggle

    Science.gov (United States)

    Long, Richard A.

    1970-01-01

    Indicates tendencies dangerous to the basic purpose of Black Studies, and identifies four external challeges--imperialism, paternalism, nihilism, and materialism. An internal challenge is considered to be the use of European and Establishment constructs to analyze black reality. (DM)

  10. Dynamics of black holes

    OpenAIRE

    Hayward, Sean A.

    2008-01-01

    This is a review of current theory of black-hole dynamics, concentrating on the framework in terms of trapping horizons. Summaries are given of the history, the classical theory of black holes, the defining ideas of dynamical black holes, the basic laws, conservation laws for energy and angular momentum, other physical quantities and the limit of local equilibrium. Some new material concerns how processes such as black-hole evaporation and coalescence might be described by a single trapping h...

  11. Noncommutative black holes

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-DomInguez, J C [Instituto de Fisica de la Universidad de Guanajuato PO Box E-143, 37150 Leoen Gto. (Mexico); Obregon, O [Instituto de Fisica de la Universidad de Guanajuato PO Box E-143, 37150 Leoen Gto. (Mexico); RamIrez, C [Facultad de Ciencias FIsico Matematicas, Universidad Autonoma de Puebla, PO Box 1364, 72000 Puebla (Mexico); Sabido, M [Instituto de Fisica de la Universidad de Guanajuato PO Box E-143, 37150 Leoen Gto. (Mexico)

    2007-11-15

    We study noncommutative black holes, by using a diffeomorphism between the Schwarzschild black hole and the Kantowski-Sachs cosmological model, which is generalized to noncommutative minisuperspace. Through the use of the Feynman-Hibbs procedure we are able to study the thermodynamics of the black hole, in particular, we calculate Hawking's temperature and entropy for the 'noncommutative' Schwarzschild black hole.

  12. Black holes without firewalls

    Science.gov (United States)

    Larjo, Klaus; Lowe, David A.; Thorlacius, Larus

    2013-05-01

    The postulates of black hole complementarity do not imply a firewall for infalling observers at a black hole horizon. The dynamics of the stretched horizon, that scrambles and reemits information, determines whether infalling observers experience anything out of the ordinary when entering a large black hole. In particular, there is no firewall if the stretched horizon degrees of freedom retain information for a time of the order of the black hole scrambling time.

  13. Black Nuns as Educators.

    Science.gov (United States)

    Rector, Theresa A.

    1982-01-01

    Traces the contributions of Black Roman Catholic nuns to Black education in the United States since the early 1800s. Also shows that, despite declining membership, the three existing religious orders continue to be active in Black education and social change. (GC)

  14. Marketing for Black Alums.

    Science.gov (United States)

    Harris, Tracy A.

    1994-01-01

    Considers need for colleges and universities to develop effective marketing plan for recruitment of black students. Highlights advantages of designing marketing plan for recruitment of black alumni to assist in recruitment and retention of black students. Identifies key indicators that often hinder institutions in their recruitment of black…

  15. Characterization and beneficiation of the Egyptian black shale for possible extraction of organic matter

    Institute of Scientific and Technical Information of China (English)

    Abd El-Rahiem F.H.; Hassan M.S.; Selim K.A.; Abdel-Khalek N.A

    2014-01-01

    The present paper focuses on obtaining concentrate enriched with organic matter that could be suitable for a retorting process from black shale; this is black shale from the Safaga area on the Red Sea Coast. X-ray diffraction and optical polarising microscope are used in evaluating black shale minerals. Attrition scrubbing and flotation were conducted for enrichment of organic matter in the black shale sample. Mineralogical studies revealed that black shale samples contain bituminous calcareous clay stone, quartz, apatite and pyrite. Rabah mine black shale contains 28% organic matter. The results of the different separation techniques indicate that attrition and flotation techniques successively enriched the organic matter in the black shale. The organic matter could be enriched in the black shale and obtained a concen-trate with 59%assaying and 85%recovery.

  16. Application of monascus in liquor production%红曲霉在白酒行业中的应用

    Institute of Scientific and Technical Information of China (English)

    袁国兴; 刘秀河

    2011-01-01

    In order to study the application and prospects of monascus in liquor brewing, this paper introduces some applications of monascus, including the application of its esterifying power in liquor production and in liquor's fermentation wastewater - - yellow serofluid, and the application of secondary fermentation metabolite in liquor industry. Monascus possesses a good esterifying power and a saccharification fermenting power, and it can produce a variety of secondary metabolites beneficial to human body in the fermentation processing. The addition of monascus in the liquor production can increase the alcohol yield and the content of ethyl acetate, and produce more nutrition and health value. Besides, monascus can he used to change the yellow serofluid into balsam liquid in the solid fermentation of liquor production. In the end, the application prospects of monascus in liquor industries are also put forward.%为了研究红曲霉在酒类酿造中的应用方向及前景,介绍了红曲霉的酯化能力在白酒生产中的应用、在白酒发酵废液--黄浆水中的应用和次级发酵代谢产物在白酒行业的应用,说明红曲霉具有较强的酯化力和发酵糖份的能力,同时还产生多种对人体有益的次级代谢产物,用于白酒的发酵生产,可以提高出酒率及乙酸乙酯的含量,增加酒的营养保健价值,还可处理白酒固态发酵产生的废弃物黄浆水产生“酯香液”作为白酒风味物质。同时展望了红曲霉在白酒行业的应用前景。

  17. Advanced space recovery systems

    Science.gov (United States)

    Wailes, William K.

    1989-01-01

    The design evolution of a space recovery system designed by a NASA-contracted study is described, with particular attention given to the design of a recovery system for a propulsion/avionics module (P/AM), which weighs 60,000 lb at the recovery initiation and achieves subsonic terminal descent at or above 50,000 ft msl. The components of the recovery system concept are described together with the operational sequences of the recovery. The recovery system concept offers low cost, low weight, good performance, a potential for pinpoint landing, and an operational flexibility.

  18. Stuffed Black Holes

    CERN Document Server

    Arbona, A; Carot, J; Mas, L; Massó, J; Stela, J

    1998-01-01

    Initial data corresponding to spacetimes containing black holes are considered in the time symmetric case. The solutions are obtained by matching across the apparent horizon different, conformally flat, spatial metrics. The exterior metric is the vacuum solution obtained by the well known conformal imaging method. The interior metric for every black hole is regular everywhere and corresponds to a positive energy density. The resulting matched solutions cover then the whole initial (Cauchy) hypersurface, without any singularity, and can be useful for numerical applications. The simpler cases of one black hole (Schwarzschild data) or two identical black holes (Misner data) are explicitly solved. A procedure for extending this construction to the multiple black hole case is also given, and it is shown to work for all time symmetric vacuum solutions obtained by the conformal imaging method. The numerical evolution of one such 'stuffed' black hole is compared with that of a pure vacuum or 'plain' black hole in the...

  19. Determination and Qualitative Analysis of Gingerol in Ginger Liquor%姜酒中姜辣素含量测定及品质研究

    Institute of Scientific and Technical Information of China (English)

    孙静

    2013-01-01

    用分光光度法测定不同姜酒中姜辣素含量,研究姜辣素含量与姜酒品质的关系,结果表明:随着姜酒度数增加,姜辣素含量增加,喝后出现反胃现象的人数增加.%The relation between content of gingerol and quality of ginger liquor is studied and the content of gingerol in different ginger liquor is determined by spectrophotometry.The results show that with the increase of degree of ginger liquor,the content of gingerol increases,the number of people who have nausea symptom increases after drinking ginger liquor.

  20. Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon adsorption method

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Ho [Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon 305-350 (Korea, Republic of); Mohapatra, D. [Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon 305-350 (Korea, Republic of); Reddy, B. Ramachandra [Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon 305-350 (Korea, Republic of) and Inorganic Chemistry Division, Indian Institute of Chemical Technology (CSIR), Hyderabad 500 007 (India)]. E-mail: brcreddy_iict@yahoo.com

    2006-11-16

    The petroleum refining industry makes extensive use of hydroprocessing catalysts. These catalysts contain environmentally critical and economically valuable metals such as Mo, V, Ni and Co. In the present study, a simple hydrometallurgical processing of spent hydrodesulphurization (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixture was investigated. Recovery of molybdenum was largely dependent on the concentrations of Na{sub 2}CO{sub 3} and H{sub 2}O{sub 2} in the reaction medium, which in turn controls the pH of leach liquor and the presence of Al and Ni as impurities. Under the optimum leaching conditions (40 g L{sup -1} Na{sub 2}CO{sub 3}, 6 vol.% H{sub 2}O{sub 2}, room temperature, 1 h) about 85% recovery of Mo was achieved. The leach liquor was processed by the carbon adsorption method, which selectively adsorbs Mo at pH around 0.75. Desorption of Mo was selective at 15 vol.% NH{sub 4}OH. With a single stage contact, it was found possible to achieve >99%, adsorption and desorption efficiency. Using this method, recovery of molybdenum as MoO{sub 3} product of 99.4% purity was achieved.

  1. Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon adsorption method.

    Science.gov (United States)

    Park, Kyung Ho; Mohapatra, D; Reddy, B Ramachandra

    2006-11-16

    The petroleum refining industry makes extensive use of hydroprocessing catalysts. These catalysts contain environmentally critical and economically valuable metals such as Mo, V, Ni and Co. In the present study, a simple hydrometallurgical processing of spent hydrodesulphurization (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixture was investigated. Recovery of molybdenum was largely dependent on the concentrations of Na2CO3 and H2O2 in the reaction medium, which in turn controls the pH of leach liquor and the presence of Al and Ni as impurities. Under the optimum leaching conditions (40 g L(-1) Na2CO3, 6 vol.% H2O2, room temperature, 1h) about 85% recovery of Mo was achieved. The leach liquor was processed by the carbon adsorption method, which selectively adsorbs Mo at pH around 0.75. Desorption of Mo was selective at 15 vol.% NH4OH. With a single stage contact, it was found possible to achieve >99%, adsorption and desorption efficiency. Using this method, recovery of molybdenum as MoO3 product of 99.4% purity was achieved. PMID:16860466

  2. Decline of the Black Sea oxygen inventory

    Science.gov (United States)

    Capet, Arthur; Stanev, Emil V.; Beckers, Jean-Marie; Murray, James W.; Grégoire, Marilaure

    2016-03-01

    We show that from 1955 to 2015, the inventory of oxygen in the Black Sea has decreased by 44 % and the basin-averaged oxygen penetration depth has decreased from 140 m in 1955 to 90 m in 2015, which is the shallowest annual value recorded during that period. The oxygenated Black Sea surface layer separates the world's largest reservoir of toxic hydrogen sulfide from the atmosphere. The threat of chemocline excursion events led to hot debates in the past decades arguing on the vertical stability of the Black Sea oxic/suboxic interface. In the 1970s and 1980s, when the Black Sea faced severe eutrophication, enhanced respiration rates reduced the thickness of the oxygenated layer. Re-increasing oxygen inventory in 1985-1995 supported arguments in favor of the stability of the oxic layer. Concomitant with a reduction of nutrient loads, it also supported the perception of a Black Sea recovering from eutrophication. More recently, atmospheric warming was shown to reduce the ventilation of the lower oxic layer by lowering cold intermediate layer (CIL) formation rates. The debate on the vertical migration of the oxic interface also addressed the natural spatial variability affecting Black Sea properties when expressed in terms of depth. Here we show that using isopycnal coordinates does not overcome the significant spatial variability of oxygen penetration depth. By considering this spatial variability, the analysis of a composite historical set of oxygen profiles evidenced a significant shoaling of the oxic layer, and showed that the transient "recovery" of the 1990s was mainly a result of increased CIL formation rates during that period. As both atmospheric warming and eutrophication are expected to increase in the near future, monitoring the dynamics of the Black Sea oxic layer is urgently required to assess the threat of further shoaling.

  3. EPA Recovery Mapper

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Recovery Mapper is an Internet interactive mapping application that allows users to discover information about every American Recovery and Reinvestment Act...

  4. 氨水喷头改造新技术%New technology for modifying ammonia liquor spray nozzle

    Institute of Scientific and Technical Information of China (English)

    熊周民; 高亮; 闫瑞杰

    2015-01-01

    This paper has made attempts to successfully solve the problem of low spray atomization of ammonia liquor and smoke emission during coal leveling through modifying the length, outlet diameter,spray angle and spray pressure of the ammonia liquor spray nozzle. After applying the new nozzle,the pressure at the spray nozzle has been reduced from 3. 5MPa to 2. 5MPa,which has created annual economic benefit of 1. 2 million yuan.%通过改造氨水喷头长度、出口直径、喷洒角度、喷洒压力,解决了氨水喷洒时雾化程度低、平煤时冒烟等问题. 采用新喷头后,将氨水喷头处的压力由3. 5MPa降低为2. 5MPa,年创经济效益约120万元.

  5. 草甘膦原粉母液处理的探讨%Discussion on Treatment of Glyphosate Mother Liquor

    Institute of Scientific and Technical Information of China (English)

    陈元群; 卢孙荣; 林庆才

    2013-01-01

      用过氧化氢氧化还原双甘膦制备草甘膦后,提取草甘膦原粉,对剩余草甘膦母液的处理条件进行摸索,进而提高草甘膦的生产收率,增加草甘膦母液的利用途径。%Glyphosate was prepared from N-(phosphonomethyl)iminodiacetic acid (PMIDA) by hydrogen peroxide oxidation and reduction reaction. The treatment conditions of glyphosate mother liquor were investigated in order to increase the production yield of glyphosate and expand the application of glyphosate mother liquor.

  6. Responses to graded replacement of urea by maize steep liquor in diets for intensively fed lambs for meat production.

    Science.gov (United States)

    Mahr-un-Nisa; Shahzad, Muhammad A; Phillips, Clive J C; Sarwar, Muhammad

    2012-06-01

    Urea is a common ingredient of the diets of intensively fed lambs, but is increasingly required for industrial processes. Maize steep liquor (MSL) is a by-product of maize grain degradation to produce starch that may be a suitable replacement. Fifty growing lambs were fed on equinitrogenous diets in which between 0% and 80% of the urea was replaced by MSL; their growth and metabolism were recorded over 70 days. Increasing replacement of urea by MSL increased feed intake and nutrient digestibilities, leading to increased growth rates, more efficient feed conversion, and increased nitrogen retention. Concentrations of triiodothyroxin, thyroxin, glucose, and methionine were increased by replacement of urea by liquor, and plasma urea was reduced. This study suggests that MSL is a suitable replacement for up to 80% of urea in the diet of rapidly growing lambs. PMID:22101979

  7. Enrichment strategy to select functional consortium from mixed cultures: Consortium from rumen liquor for simultaneous cellulose degradation and hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Aijie; Ren, Nanqi [State Key Lab of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090 (China); School of Environmental and Municipal Engineering, Harbin Institute of Technology, Harbin 150090 (China); Gao, Lingfang; Xu, Jifei; Liu, Chong; Lee, Duu-Jong [School of Environmental and Municipal Engineering, Harbin Institute of Technology, Harbin 150090 (China)

    2010-12-15

    Strain isolation using conventional roll tube/plating technique is time consuming and is able to culture in vitro only a small fraction of existing microbes in a natural microflora. This paper proposed a simple and rapid method to select the as-simple-as-possible biological consortium by serially diluting the original mixed culture. The diluted which remains, while the one diluted in serial loses the target function, is defined as the functional consortium of the original mixed culture. Since the microbial structure and the reaction pathway incorporated with the functional consortium is much simpler than its original mother liquor, detailed analysis on the strain interaction is possible without the risk of losing key functional strains as often caused from conventional isolation method. The rumen liquor that can degrade cellulose and produce hydrogen is used as a demonstration example. A ''rumen cellulose-degrading bacterial consortium'' (RCBC) was identified using the proposed enrichment strategy. (author)

  8. Development of Computer-assisted Liquor Evaluation Technology%白酒计算机品评技术的发展

    Institute of Scientific and Technical Information of China (English)

    宋书玉

    2011-01-01

    The great contribution of computer-assisted liquor evaluation technology is digitization of sensory indexes, statistical calculation of sensory data by computer programming, and computer-assisted summary of sensory evaluation results. In this paper, the significance of computer-as- sisted liquor evaluation technology in liquor tasting, the functions of computer in liquor tasting, and the innovative application of computer-assist- ed liquor evaluation technology in liquor tasting were introduced in details.%白酒计算机品评技术的重要贡献是把感官指标数据化,通过计算机编程完成感官数据的统计计算,以及对感官品评的归纳总结。对白酒计算机品评技术在白酒品评中的重要性、计算机在白酒品评过程的功能、计算机品评技术在白酒品评过程的应用创新进行了详述。

  9. PREGNANCY OUTCOME FOLLOWING INDUCTION OF LABOUR IN OLIGOHYDRAMNIOS AND BO R DERLINE LIQUOR AT TERM: A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Akshaya Kumar

    2013-12-01

    Full Text Available The purpose of this study was to compare the feto - maternal outcome after induction of labor in oligohydramnios and bo r derline liquorat term. STUDY DESIGN : This retrospective study was conducted in a medical college and general hospital with wome n of 37 – 42 weeks’ gestation. The amniotic fluid index (AFI was determined in all cases using the four - quadrant technique. The cases were divided into two groups based on their AFI. Oligohydramnios group (n=102 with AFI ≤ 5 cm and borderline liquor group (n=99 with AFI of 5.1 to 8 cm. Induction of labor was done by misoprostol in all cases. Different maternal outcomes like mode of delivery , indication for operative or instrumental delivery , meconium stained liquor and perinatal outcomes were compared in b etween the two groups. RESULTS : The two groups were similar with regard to maternal age , parity , and gestational age. Meconium staining of the amniotic fluid was significantly higher in the group with AFI < 5 cm (p = 0.05. The number of cesarean deliveries and incidence non - reassuring fetal heart (fetal distress were similar in both the groups. There was no significant difference between the two groups with regard to Apgar scores or admission to neonatal intensive care unit (NICU. CONCLUSION : Induction of labor at term in women with oligohydramnios is associated with an increased incidence of meconium staining of the amniotic fluid but the risk of cesarean delivery or fetal distress it is not increased as compared with bo r derline liquor. KEYWO RDS: Amniotic fluid index; Bo r derline liquor; Induction of labor; Fetal distress Oligohydramnios at Term

  10. Eco-friendly synthesis for MCM-41 nanoporous materials using the non-reacted reagents in mother liquor

    OpenAIRE

    Ng, Eng-Poh; Goh, Jia-Yi; Ling, Tau Chuan; Mukti, Rino R

    2013-01-01

    Nanoporous materials such as Mobil composite material number 41 (MCM-41) are attractive for applications such as catalysis, adsorption, supports, and carriers. Green synthesis of MCM-41 is particularly appealing because the chemical reagents are useful and valuable. We report on the eco-friendly synthesis of MCM-41 nanoporous materials via multi-cycle approach by re-using the non-reacted reagents in supernatant as mother liquor after separating the solid product. This approach was achieved vi...

  11. Study on Extraction Technology of Liquor of Poria Cocos%茯苓白酒浸提工艺研究

    Institute of Scientific and Technical Information of China (English)

    曹敬华; 蒋威; 张家庆; 朱正军; 陈茂彬; 方尚玲

    2014-01-01

    Poria cocos was pretreated by using ultrasonic fragmentation, the extraction technology of liquor of poria cocos was studied. The results showed that the optimum conditions for the process are as follows: the time of pretreatment was 15 min, the ritio of raw materials and water was 1:6, the time of extraction was 20d, the alcohol degree of Puree liquor was 55% (V/V), under the above conditions, poria polysaccharide content in the produced liquor reached up to 19.05 mg/L. GC Analysis showed that the content of ethyl acetate and ethyl lactate were increased in Liquor of Poria cocos after using ultrasonic fragmentation, but the content of fusel oil was not changed obviously.%采用超声波破碎法对茯苓进行前处理,对茯苓白酒浸提工艺进行研究,结果表明,优化的工艺条件为:超声波前处理15min,料液比1∶6,浸提时间20d,浸提原浆白酒酒度55%vol,在此条件下制得的茯苓白酒中茯苓多糖含量可达19.05mg/L。GC分析表明,经超声波处理后,茯苓白酒中乙酸乙酯含量有所增加,乳酸乙酯含量略有升高,杂醇油含量无明显变化。

  12. A Method for Rapid Determination of Ethyl Palmitate in Baijiu(Liquor)%一种快速测量白酒中棕榈酸乙酯的方法

    Institute of Scientific and Technical Information of China (English)

    周海洋; 王士敏; 于金侠; 孙玉玲

    2014-01-01

    Ethyl palmitate is a pale yellow oily liquid, insoluble in water, soluble in alcohol, ether, acetone, and other organic solvents, and can be prepared by the reaction of palmitic acid and anhydrous ethanol. It has faint aroma of wax, fruit, and cream. In this study, we established a method for the determination of ethyl palmitate in Baijiu(liquor) by GC-MS, which is simple, rapid, with high extraction and recovery rate, strong anti-in-terference ability, good reproducibility, high qualitative and quantitative accuracy. This method can be used to guide production, to provide basis for quality control, and to help improving the quality of Baijiu(liquor).%棕榈酸乙酯为浅黄色油状液体,呈微弱蜡香、果香和奶油香气,不溶于水,溶于醇、醚、丙酮等有机溶剂,可由棕榈酸和无水乙醇反应制得。本研究建立了白酒中棕榈酸乙酯的GC-MS检测方法,此方法操作简便,快速,萃取率和回收率高,抗干扰能力强,重现性良好,定性定量准确,能够快速指导生产,为质量控制提供依据,有助于白酒品质的提高。

  13. Recovery from mental illness

    DEFF Research Database (Denmark)

    Petersen, Kirsten Schultz; Friis, Vivi Soegaard; Haxholm, Birthe Lodahl;

    2015-01-01

    Mental health services strive to implement a recovery-oriented approach to rehabilitation. Little is known about service users' perception of the recovery approach. The aim is to explore the service user's perspectives on facilitators and barriers associated with recovery. Twelve residents living...

  14. Analysis of Obstacles to Export Chinese Liquor%谈中国白酒出口的障碍

    Institute of Scientific and Technical Information of China (English)

    周海平

    2011-01-01

    Liquor is a traditional product,but exports very little long.Searches its reason,mainly lies in two big aspects.Our country wines production sale macroenvironment has the disorder,the trade barrier and so on five integrity barrier;White wine business oneself also has raw material and the craft complex,the product does not gather the foreign consumer to drink barrier questions and so on the custom.Only really in-depth understanding of these issues in order to design effective troubleshooting measures promoting long-selling of liquor abroad,really make country liquor fragrance worldwide.%白酒是我国的传统产品,但是长期以来出口量极少。探其原因,主要在于两大方面。我国酒类生产销售的大环境存在着无序、贸易壁垒等五个整体性障碍;白酒业自身也存在着原料与工艺的复杂、产品不合外国消费者饮用习尚等障碍问题。只有真正深入了解这些问题才能设计有效的排障措施,促进白酒长期畅销国外,真正使国酒飘香全球。

  15. Characterization of Green Liquor Dregs, Potentially Useful for Prevention of the Formation of Acid Rock Drainage

    Directory of Open Access Journals (Sweden)

    Maria Mäkitalo

    2014-04-01

    Full Text Available Using alternative materials such as residual products from other industries to mitigate the negative effects of acid rock drainage would simultaneously solve two environmental problems. The main residual product still landfilled by sulphate paper mills is the alkaline material green liquor dregs (GLD. A physical, mineralogical and chemical characterization of four batches of GLD was carried out to evaluate the potential to use it as a sealing layer in the construction of dry covers on sulphide-bearing mine waste. GLD has relatively low hydraulic conductivity (10−8 to 10−9 m/s, a high water retention capacity (WRC and small particle size. Whilst the chemical and mineralogical composition varied between the different batches, these variations were not reflected in properties such as hydraulic conductivity and WRC. Due to relatively low trace element concentrations, leaching of contaminants from the GLD is not a concern for the environment. However, GLD is a sticky material, difficult to apply on mine waste deposits and the shear strength is insufficient for engineering applications. Therefore, improving the mechanical properties is necessary. In addition, GLD has a high buffering capacity indicating that it could act as an alkaline barrier. Once engineering technicalities have been overcome, the long-term effectiveness of GLD should be studied, especially the effect of aging and how the sealing layer would be engineered in respect to topography and climatic conditions.

  16. Performance of novel sludge-bed anaerobic membrane bioreactor (SB-AnMBR) treating prehydrolysis liquor.

    Science.gov (United States)

    Kale, Mayur M; Singh, Kripa S

    2014-01-01

    The feasibility of a novel sludge-bed anaerobic membrane bioreactor (SB-AnMBR) configuration for treating a waste stream from a dissolving pulp production industry was evaluated. The waste stream, called prehydrolysis liquor (PHL), is generated after the wood chips are subjected to high temperature steam to remove unwanted hemicelluloses. The PHL with total chemical oxygen demand (COD) of approximately 100 g/L contained mainly sugars, furfural, lignin, and acetic acid. The SB-AnMBR was fed with the PHL at organic loading rates in a range of 0.8 to10 kg-COD/(m(3)·d). The COD removal efficiency of more than 85% and an average rate of methane production of 0.35 m(3)/(kg-COD·d) were observed at each loading rate. No detectable sugars or furfural were present in the treated effluent from SB-AnMBR. Lignin removal varied from 60 to 90%. Flat-sheet membranes performed well with one fouling event during first 400 days of operation. PMID:24569279

  17. [Effect of powdered activated carbon on the sludge mixed liquor characteristics and membrane fouling of MBR].

    Science.gov (United States)

    Li, Shao-Feng; Gao, Yuan

    2011-02-01

    Effect of dosing powder activated carbon (PAC) on the characteristics of the sludge mixed liquor in membrane bioreactor (MBR) was investigated by parallel tests. And the reason that PAC mitigated membrane fouling was also explored. The results showed that PAC could decrease mixture viscosity and increase sludge particle size, which led to less trans-membrane pressure developing. Extracellular polymer substances (EPS) content, sludge specific resistance and cake layer resistance (R(c)) had a good correlation. Adding PAC could decrease EPS concentration, sludge specific resistance and then slow down the increase of R(c), which mitigated membrane fouling. Membrane pore blocking resistance (R(p)) increased exponentially with increasing of the soluble microbial products (SMP) concentration in the supernatant. Dosing PAC reduced the SMP concentration and slowed down the growth rate of R(p), which was helpful to mitigating membrane fouling. R(c) and R(p) increased along with the operation of MBRs and R(c)/R(f) (26.32% -63.16%) was always greater than R(p)/R(f) (7.89% -35.32%) which suggested the R(c) was the main factor in membrane fouling. Moreover, it was also found that controlling of dosing PAC on R(c) was better than it on R(p). PMID:21528575

  18. Magnox Swarf Storage Silo Liquor Effluent Management -Sellafield Site, Cumbria, UK - Legacy radioactive waste storage - 59271

    International Nuclear Information System (INIS)

    The Sellafield Magnox Swarf Storage Silo (MSSS) was constructed to provide an underwater storage facility for irradiated magnox cladding metal Swarf, as well as miscellaneous beta-gamma waste from several sources. Liquid effluent arisings from hazard reduction activities at this facility represent the toughest effluent treatment challenge within the company's Legacy Ponds and Silos portfolio. The key requirement for hazard reduction has generated many substantial challenges as the facility is readied for decommissioning. This has demanded the production of carefully thought out strategies for managing, and overcoming, the key difficulties to be encountered as hazard reduction progresses. The complexity associated with preparing for waste retrievals from the Magnox Swarf Storage Silo, has also generated the demand for a mix of creativity and perseverance to meet the challenges and make progress. Challenging the status quo and willingness to accept change is not easy and the road to overall hazard reduction for the high hazard MSSS facility will demand the skills and investment of individuals, teams, and entire facility work-forces. The first steps on this road have been taken with the successful introduction of liquor management operations, however much more is yet to be achieved. Clear communication, investing in stakeholder management, perseverance in the face of difficulty and a structured yet flexible programme delivery approach, will ensure the continued success of tackling the complex challenges of treating liquid effluent from a legacy fuel storage silo at the Sellafield Site. (authors)

  19. Effect of components in activated sludge liquor on membrane fouling in a submerged membrane bioreactor

    Institute of Scientific and Technical Information of China (English)

    YU Shui-li; ZHAO Fang-bo; ZHANG Xiao-hui; JING Guo-lin; ZHEN Xiang-hua

    2006-01-01

    By a membrane bioreactor with a settle tank in long-term operation and batch experiments, the effects of flocs, soluble microorganism products (SMPs) and metal ions in activated sludge liquor on membrane fouling were investigated. The results showed that foulants absorbed each other and formed a fouling layer as a "second membrane" influencing the permeability of the membrane.The "gel layer" caused by SMPs and "cake layer" by flocs showed great differences in morphology by analysis of scanning electron microscope and atomic force microscope. The "gel layer" was more compact and of poor permeability. When the membrane flux was MPa/h). SMPs played very important roles on membrane fouling. In the bu1king sludge, with SMPs increasing, the rate of membrane fouling (0.0132 MPa/h) was faster. While after flocculation of the SMPs, the rate of fouling decreased to 0.0034 MPa/h. Flocs could keep holes in their overlaps. They could alleviate membrane fouling by preventing the SMPs directly attaching on membrane surface.

  20. Global Fund collusion with liquor giant is a clear conflict of interest.

    Science.gov (United States)

    Matzopoulos, Richard; Parry, Charles D H; Corrigall, Joanne; Myers, Jonny; Goldstein, Sue; London, Leslie

    2012-01-01

    Alcohol is the third leading contributor to death and disability in South Africa, where SABMiller is the major supplier of malt beer, the most popular beverage consumed. The Global Fund to Fight AIDS, Tuberculosis and Malaria (Global Fund) has recently included SABMiller as a recipient of funding for an education intervention aimed at minimizing alcohol-related harm, including HIV prevention, among men in drinking establishments. Global Fund support for this initiative is cause for concern. It is debatable whether these men are the best target group for the intervention, whether a drinking establishment is the best location, and whether the educational intervention itself is effective. Our experience is that the liquor industry is inclined to support alcohol interventions that will not affect drinking rates at a population level. These interventions allow the industry to simultaneously fulfil social and legal obligations to address the harmful use of alcohol while ensuring that sales and profits are maintained. Providing funding for a highly profitable industry that could afford to fund its own interventions also reduces the funds available for less well-resourced organizations. Do we take it that the problem of "corporate capture" has now spread to one of the largest health funders in the world? PMID:22271967

  1. Isolating lignin from spent liquor of thermomechanical pulping process via adsorption.

    Science.gov (United States)

    Oveissi, Farshad; Fatehi, Pedram

    2014-01-01

    Wood chips are pretreated with steam prior to refining in the thermomechanical pulping process. The steam treatment dissolves part of lignin of wood chips in the spent liquor (SL) of this process, and subsequently the SL is sent to the wastewater system of the process. However, the lignin of SL can be used in the production of value-added chemicals, but it should first be separated from the SL in order to have a feasible downstream process. In this study, activated carbon (AC) was considered as an adsorbent to isolate lignin from SL. The results showed that the maximum adsorption of lignin on AC was 166 mg/g under the optimal conditions of pH 5.2, 30 degrees C and 3 h treatment. Furthermore, the separation of lignin from SL was improved from 45% to 60% by having a two-stage adsorption process at pH 5.2, which also reduced the turbidity and chemical oxygen demand of SL by 39% and 32%, respectively.

  2. Modeling of Nitrous Oxide Production from Nitritation Reactors Treating Real Anaerobic Digestion Liquor.

    Science.gov (United States)

    Wang, Qilin; Ni, Bing-Jie; Lemaire, Romain; Hao, Xiaodi; Yuan, Zhiguo

    2016-01-01

    In this work, a mathematical model including both ammonium oxidizing bacteria (AOB) and heterotrophic bacteria (HB) is constructed to predict N2O production from the nitritation systems receiving the real anaerobic digestion liquor. This is for the first time that N2O production from such systems was modeled considering both AOB and HB. The model was calibrated and validated using experimental data from both lab- and pilot-scale nitritation reactors. The model predictions matched the dynamic N2O, ammonium, nitrite and chemical oxygen demand data well, supporting the capability of the model. Modeling results indicated that HB are the dominant contributor to N2O production in the above systems with the dissolved oxygen (DO) concentration of 0.5-1.0 mg O2/L, accounting for approximately 75% of N2O production. The modeling results also suggested that the contribution of HB to N2O production decreased with the increasing DO concentrations, from 75% at DO = 0.5 mg O2/L to 25% at DO = 7.0 mg O2/L, with a corresponding increase of the AOB contribution (from 25% to 75%). Similar to HB, the total N2O production rate also decreased dramatically from 0.65 to 0.25 mg N/L/h when DO concentration increased from 0.5 to 7.0 mg O2/L. PMID:27125491

  3. Use of steam explosion liquor from sugar cane bagasse for lignin peroxidase production by Phanerochaete chrysosporium.

    Science.gov (United States)

    Ferrara, Maria Antonieta; Bon, Elba P S; Araujo Neto, Julio Silva

    2002-01-01

    The possibility of using two by-products of the sugar cane industry, molasses and bagasse steam explosion liquor (SEL), for lignin peroxidase (LiP) production by Phanerochaete chrysosporium was investigated. For comparison, the fungus was initially cultivated in synthetic media containing either glucose, sucrose, xylose, or xylan as sole carbon sources. The effect of veratryl alcohol (VA) was also investigated in relation to the enzyme activity levels. Results showed that sucrose was not metabolized by this fungus, which precluded the use of molasses as a carbon source. Glucose, xylose, and xylan promoted equivalent cell growth. Enzyme levels in the absence of VA were lower than 28 UI/L and in the presence of VA reached 109 IU/L with glucose and 85 IU/L with xylose or xylan. SEL was adequate for P. chrysosporium LiP production as LiP activity reached 90 IU/L. When VA was added to this medium, enzyme concentration increased to 155 IU/L.

  4. Separation of lignocelluloses from spent liquor of NSSC pulping process via adsorption.

    Science.gov (United States)

    Dashtban, Mehdi; Gilbert, Allan; Fatehi, Pedram

    2014-04-01

    Hemicelluloses and lignin present in the spent liquor (SL) of neutral sulfite semichemical (NSSC) pulping process can potentially be converted into value-added products such as furfural, hydroxymethylfurfural, levulinic acid, phenols and adhesives. However, the direct conversion of hemicelluloses and lignin of SL into value-added products is uneconomical due to the dilute nature of the SL. To have a feasible downstream process for utilizing lignocelluloses of SL, the lignocelluloses should initially be separated from the SL. In this study, an adsorption process (via applying activated carbon) was considered for isolating the dissolved lignin and hemicelluloses from the SL of an NSSC pulping process. Under the optimal conditions of pH, SL/AC weight ratio, time and temperature of 5.7, 30, 360 min and 30 °C, the maximum lignin and hemicellulose adsorptions were 0.33 and 0.25 g/g on AC. The chemical oxygen demand (COD) and turbidity of the SL were decreased by 11% and 39%, respectively, as a result of lignocellulose adsorption on AC. Also, the incineration behavior of the SL-treated AC was studied with a thermo-gravimetric analysis (TGA). PMID:24565877

  5. A Critical Comparison of Methods for the Analysis of Indigo in Dyeing Liquors and Effluents

    Directory of Open Access Journals (Sweden)

    Valentina Buscio

    2014-08-01

    Full Text Available Indigo is one of the most important dyes in the textile industry. The control of the indigo concentration in dyeing liquors and effluents is an important tool to ensure the reproducibility of the dyed fabrics and also to establish the efficiency of the wastewater treatment. In this work, three analytical methods were studied and validated with the aim to select a reliable, fast and automated method for the indigo dye determination. The first method is based on the extraction of the dye, with chloroform, in its oxidized form. The organic solution is measured by Ultraviolet (UV-visible spectrophotometry at 604 nm. The second method determines the concentration of indigo in its leuco form in aqueous medium by UV-visible spectrophotometry at 407 nm. Finally, in the last method, the concentration of indigo is determined by redox titration with potassium hexacyanoferrate (K3(Fe(CN6. The results indicated that the three methods that we studied met the established acceptance criteria regarding accuracy and precision. However, the third method was considered the most adequate for application on an industrial scale due to its wider work range, which provides a significant advantage over the others.

  6. Modeling of Nitrous Oxide Production from Nitritation Reactors Treating Real Anaerobic Digestion Liquor

    Science.gov (United States)

    Wang, Qilin; Ni, Bing-Jie; Lemaire, Romain; Hao, Xiaodi; Yuan, Zhiguo

    2016-01-01

    In this work, a mathematical model including both ammonium oxidizing bacteria (AOB) and heterotrophic bacteria (HB) is constructed to predict N2O production from the nitritation systems receiving the real anaerobic digestion liquor. This is for the first time that N2O production from such systems was modeled considering both AOB and HB. The model was calibrated and validated using experimental data from both lab- and pilot-scale nitritation reactors. The model predictions matched the dynamic N2O, ammonium, nitrite and chemical oxygen demand data well, supporting the capability of the model. Modeling results indicated that HB are the dominant contributor to N2O production in the above systems with the dissolved oxygen (DO) concentration of 0.5–1.0 mg O2/L, accounting for approximately 75% of N2O production. The modeling results also suggested that the contribution of HB to N2O production decreased with the increasing DO concentrations, from 75% at DO = 0.5 mg O2/L to 25% at DO = 7.0 mg O2/L, with a corresponding increase of the AOB contribution (from 25% to 75%). Similar to HB, the total N2O production rate also decreased dramatically from 0.65 to 0.25 mg N/L/h when DO concentration increased from 0.5 to 7.0 mg O2/L. PMID:27125491

  7. Full-scale sludge liquor treatment for ammonium reduction with low carbon dosage.

    Science.gov (United States)

    Gustavsson, D J I; Nyberg, U; Jansen, J la Cour

    2011-01-01

    The separate treatment of sludge liquor, produced by dewatering anaerobic digested sludge at wastewater treatment plants, gives rise to extreme environments for nitrogen removal. A full-scale sequencing batch reactor was operated with the aim of introducing and studying denitritation as a supplement to nitritation in order to reduce operating costs. Since the main plant only has problems with ammonium reduction capacity, the initial strategy was to have sufficient ammonium reduction with optimal alkalinity production by denitrifiers, i.e. low carbon dosage and minimum alkalinity and residual oxidized ammonium in the effluent. This strategy led to an unbalanced and sensitive process because the denitrifiers were often inhibited. High dissolved oxygen (DO) readings and no decrease in oxidation-reduction potential (ORP) during anoxic phases with simultaneous ethanol dosage indicated inhibition of denitrifiers, probably by the intermediate product NO, which may have interfered with the DO sensor. Nitric oxide production was believed to be favoured in the beginning of the anoxic phase as a result of low pH and high nitrite concentration. A stable nitritation-denitritation process could be achieved when the aerobic hydraulic retention time (HRT) was decreased to the same length as the anoxic HRT, which resulted in increased unused alkalinity. PMID:21879560

  8. Producing high-strength liquor from mesophilic batch acidification of chicken manure.

    Science.gov (United States)

    Abendroth, Christian; Wünsche, Erik; Luschnig, Olaf; Bürger, Christoph; Günther, Thomas

    2015-03-01

    This report describes the results from anaerobic batch acidification of chicken manure as a mono-substrate studied under mesophilic conditions. The manure was diluted with tap water to prevent methane formation during acidification and to improve mixing conditions by reducing fluid viscosity; no anaerobic digester sludge has been added as an inoculum. Highest acidification rates were measured at concentrations of 10 gVS L⁻¹ and 20 gVS L⁻¹; the pH value remained high (pH 6.9-7.9) throughout the test duration and unexpected fast methane formation was observed in every single batch. At substrate concentrations of 10 gVS L⁻¹ there was a remarkable methane formation representing a value of 82% of the respective biochemical methane potential of chicken manure. Increasing substrate concentrations did not supress methane formation but impaired acid production. Consequently, the liquor cannot be stored over longer periods but should immediately be used in a digestion process. PMID:25672618

  9. Pyramidal texturing of silicon surface via inorganic-organic hybrid alkaline liquor for heterojunction solar cells

    Science.gov (United States)

    Wang, Fengyou; Zhang, Xiaodan; Wang, Liguo; Jiang, Yuanjian; Wei, Changchun; Zhao, Ying

    2015-10-01

    We demonstrate a new class of silicon texturing approach based on inorganic (sodium hydroxide, NaOH) and organic (tetramethylammonium hydroxide, TMAH) alkaline liquor etching processes for photovoltaic applications. The first stage of inorganic alkaline etching textures the silicon surface rapidly with large pyramids and reduces the cost. The subsequent organic alkaline second-etching improves the coverage of small pyramids on the silicon surface and strip off the metallic contaminants produced by the first etching step. In addition, it could smoothen the surface of the pyramids to yield good morphology. In this study, the texturing duration of both etching steps was controlled to optimize the optical and electrical properties as well as the surface morphology and passivation characteristics of the silicon substrates. Compared with traditional inorganic NaOH texturing, this hybrid process yields smoother (111) facets of the pyramids, fewer residual Na+ ions on the silicon surface, and a shorter processing period. It also offers the advantage of lower cost compared with the organic texturing method based on the use of only TMAH. We applied this hybrid texturing process to fabricate silicon heterojunction solar cells, which showed a remarkable improvement compared with the cells based on traditional alkaline texturing processes.

  10. Stimulated Black Hole Evaporation

    CERN Document Server

    Spaans, Marco

    2016-01-01

    Black holes are extreme expressions of gravity. Their existence is predicted by Einstein's theory of general relativity and is supported by observations. Black holes obey quantum mechanics and evaporate spontaneously. Here it is shown that a mass rate $R_f\\sim 3\\times 10^{-8} (M_0/M)^{1/2}$ $M_0$ yr$^{-1}$ onto the horizon of a black hole with mass $M$ (in units of solar mass $M_0$) stimulates a black hole into rapid evaporation. Specifically, $\\sim 3 M_0$ black holes can emit a large fraction of their mass, and explode, in $M/R_f \\sim 3\\times 10^7 (M/M_0)^{3/2}$ yr. These stimulated black holes radiate a spectral line power $P \\sim 2\\times 10^{39} (M_0/M)^{1/2}$ erg s$^{-1}$, at a wavelength $\\lambda \\sim 3\\times 10^5 (M/M_0)$ cm. This prediction can be observationally verified.

  11. Extremal Hairy Black Holes

    CERN Document Server

    Gonzalez, P A; Saavedra, Joel; Vasquez, Yerko

    2014-01-01

    We consider a gravitating system consisting of a scalar field minimally coupled to gravity with a self-interacting potential and an U(1) electromagnetic field. Solving the coupled Einstein-Maxwell-scalar system we find exact hairy charged black hole solutions with the scalar field regular everywhere. We go to the zero temperature limit and we study the effect of the scalar field on the near horizon geometry of an extremal black hole. We find that except a critical value of the charge of the black hole there is also a critical value of the charge of the scalar field beyond of which the extremal black hole is destabilized. We study the thermodynamics of these solutions and we find that if the space is flat then at low temperature the Reissner-Nordstr\\"om black hole is thermodynamically preferred, while if the space is AdS the hairy charged black hole is thermodynamically preferred at low temperature.

  12. Astrophysical black holes

    CERN Document Server

    Gorini, Vittorio; Moschella, Ugo; Treves, Aldo; Colpi, Monica

    2016-01-01

    Based on graduate school lectures in contemporary relativity and gravitational physics, this book gives a complete and unified picture of the present status of theoretical and observational properties of astrophysical black holes. The chapters are written by internationally recognized specialists. They cover general theoretical aspects of black hole astrophysics, the theory of accretion and ejection of gas and jets, stellar-sized black holes observed in the Milky Way, the formation and evolution of supermassive black holes in galactic centers and quasars as well as their influence on the dynamics in galactic nuclei. The final chapter addresses analytical relativity of black holes supporting theoretical understanding of the coalescence of black holes as well as being of great relevance in identifying gravitational wave signals. With its introductory chapters the book is aimed at advanced graduate and post-graduate students, but it will also be useful for specialists.

  13. Battleground Energy Recovery Project

    Energy Technology Data Exchange (ETDEWEB)

    Bullock, Daniel [USDOE Gulf Coast Clean Energy Application Center, Woodlands, TX (United States)

    2011-12-31

    In October 2009, the project partners began a 36-month effort to develop an innovative, commercial-scale demonstration project incorporating state-of-the-art waste heat recovery technology at Clean Harbors, Inc., a large hazardous waste incinerator site located in Deer Park, Texas. With financial support provided by the U.S. Department of Energy, the Battleground Energy Recovery Project was launched to advance waste heat recovery solutions into the hazardous waste incineration market, an area that has seen little adoption of heat recovery in the United States. The goal of the project was to accelerate the use of energy-efficient, waste heat recovery technology as an alternative means to produce steam for industrial processes. The project had three main engineering and business objectives: Prove Feasibility of Waste Heat Recovery Technology at a Hazardous Waste Incinerator Complex; Provide Low-cost Steam to a Major Polypropylene Plant Using Waste Heat; and Create a Showcase Waste Heat Recovery Demonstration Project.

  14. Cosmic Black Holes

    OpenAIRE

    Ahn, Eun-Joo; Cavaglia, Marco

    2003-01-01

    Production of high-energy gravitational objects is a common feature of gravitational theories. The primordial universe is a natural setting for the creation of black holes and other nonperturbative gravitational entities. Cosmic black holes can be used to probe physical properties of the very early universe which would usually require the knowledge of the theory of quantum gravity. They may be the only tool to explore thermalisation of the early universe. Whereas the creation of cosmic black ...

  15. The New Black

    OpenAIRE

    Lettman-Hicks, Sharon

    2014-01-01

    The New Black is a documentary that tells the story of how the African American community is grappling with the gay rights issue in light of the recent gay marriage movement and the fight over Civil Rights. The film documents activities, families and clergy on both sides of the campaign to legalize gay marriage and examines homophobia in the Black community's institutional pillar, the Black church, and reveals the Christian right wing's strategy of exploiting this phenomenon in order to pursu...

  16. Perturbations around black holes

    CERN Document Server

    Wang, B

    2005-01-01

    Perturbations around black holes have been an intriguing topic in the last few decades. They are particularly important today, since they relate to the gravitational wave observations which may provide the unique fingerprint of black holes' existence. Besides the astrophysical interest, theoretically perturbations around black holes can be used as testing grounds to examine the proposed AdS/CFT and dS/CFT correspondence.

  17. Black Branes as Piezoelectrics

    CERN Document Server

    Armas, Jay; Obers, Niels A

    2012-01-01

    We find a realization of linear electroelasticity theory in gravitational physics by uncovering a new response coefficient of charged black branes, exhibiting their piezoelectric behavior. Taking charged dilatonic black strings as an example and using the blackfold approach we measure their elastic and piezolectric moduli. We also use our results to draw predictions about the equilibrium condition of charged dilatonic black rings in dimensions higher than six.

  18. Black branes as piezoelectrics.

    Science.gov (United States)

    Armas, Jay; Gath, Jakob; Obers, Niels A

    2012-12-14

    We find a realization of linear electroelasticity theory in gravitational physics by uncovering a new response coefficient of charged black branes, exhibiting their piezoelectric behavior. Taking charged dilatonic black strings as an example and using the blackfold approach we measure their elastic and piezolectric moduli. We also use our results to draw predictions about the equilibrium condition of charged dilatonic black rings in dimensions higher than six. PMID:23368298

  19. Ten shades of black

    CERN Document Server

    Hod, Shahar

    2015-01-01

    The holographic principle has taught us that, as far as their entropy content is concerned, black holes in $(3+1)$-dimensional curved spacetimes behave as ordinary thermodynamic systems in flat $(2+1)$-dimensional spacetimes. In this essay we point out that the opposite behavior can also be observed in black-hole physics. To show this we study the quantum Hawking evaporation of near-extremal Reissner-Nordstr\\"om black holes. We first point out that the black-hole radiation spectrum departs from the familiar radiation spectrum of genuine $(3+1)$-dimensional perfect black-body emitters. In particular, the would be black-body thermal spectrum is distorted by the curvature potential which surrounds the black hole and effectively blocks the emission of low-energy quanta. Taking into account the energy-dependent gray-body factors which quantify the imprint of passage of the emitted radiation quanta through the black-hole curvature potential, we reveal that the $(3+1)$-dimensional black holes effectively behave as p...

  20. Evidence for black holes.

    Science.gov (United States)

    Begelman, Mitchell C

    2003-06-20

    Black holes are common objects in the universe. Each galaxy contains large numbers-perhaps millions-of stellar-mass black holes, each the remnant of a massive star. In addition, nearly every galaxy contains a supermassive black hole at its center, with a mass ranging from millions to billions of solar masses. This review discusses the demographics of black holes, the ways in which they interact with their environment, factors that may regulate their formation and growth, and progress toward determining whether these objects really warp spacetime as predicted by the general theory of relativity. PMID:12817138

  1. Asymptotic Black Holes

    CERN Document Server

    Ho, Pei-Ming

    2016-01-01

    Following earlier works on the KMY model of black-hole formation and evaporation, we construct the metric for a matter sphere in gravitational collapse, with the back-reaction of pre-Hawking radiation taken into consideration. The mass distribution and collapsing velocity of the matter sphere are allowed to have an arbitrary radial dependence. We find that a generic gravitational collapse asymptote to a universal configuration which resembles a black hole but without horizon. This approach clarifies several misunderstandings about black-hole formation and evaporation, and provides a new model for black-hole-like objects in the universe.

  2. Black stain - a review.

    Science.gov (United States)

    Ronay, Valerie; Attin, Thomas

    2011-01-01

    The purpose of this review was to summarise the fundamentals about black stain, its diagnosis and possible differential diagnoses as well as its microbiology and therapy. In addition, various studies investigating the relationship between black stain and dental caries are examined. Many studies report lower caries prevalence in children with black stain, but this finding could not be confirmed by all authors. Also, a negative relation between degree of staining and caries severity has been described. Reasons for these results are not yet clear but it was speculated that they are related to the specific oral microflora described in black stain-affected individuals. PMID:21594205

  3. A Black Hole Levitron

    CERN Document Server

    Arsiwalla, Xerxes D

    2009-01-01

    We study the problem of spatially stabilising four dimensional extremal black holes in background electric/magnetic fields. Whilst looking for stationary stable solutions describing black holes kept in external fields we find that taking a continuum limit of Denef et al's multi-center solutions provides a supergravity description of such backgrounds within which a black hole can be trapped in a given volume. This is realised by levitating a black hole over a magnetic dipole base. We comment on how such a construction resembles a mechanical Levitron.

  4. Deforming regular black holes

    CERN Document Server

    Neves, J C S

    2015-01-01

    In this work, we have deformed regular black holes which possess a general mass term described by a function which generalizes the Bardeen and Hayward mass terms. Using linear constraints in the energy-momentum tensor, the solutions are either regular or singular. That is, with this approach, it is possible to generate singular black holes from regular black holes and vice versa. Moreover, contrary to the Bardeen and Hayward regular solutions, the regular deformed metrics may violate the weak energy condition despite the presence of the spherical symmetry. Some comments on accretion of deformed black holes in cosmological scenarios are made.

  5. Black holes and beyond

    International Nuclear Information System (INIS)

    Belief in the existence of black holes is the ultimate act of faith for a physicist. First suggested by the English clergyman John Michell in the year 1784, the gravitational pull of a black hole is so strong that nothing - not even light - can escape. Gravity might be the weakest of the fundamental forces but black-hole physics is not for the faint-hearted. Black holes present obvious problems for would-be observers because they cannot, by definition, be seen with conventional telescopes - although before the end of the decade gravitational-wave detectors should be able to study collisions between black holes. Until then astronomers can only infer the existence of a black hole from its gravitational influence on other matter, or from the X-rays emitted by gas and dust as they are dragged into the black hole. However, once this material passes through the 'event horizon' that surrounds the black hole, we will never see it again - not even with X-ray specs. Despite these observational problems, most physicists and astronomers believe that black holes do exist. Small black holes a few kilometres across are thought to form when stars weighing more than about two solar masses collapse under the weight of their own gravity, while supermassive black holes weighing millions of solar masses appear to be present at the centre of most galaxies. Moreover, some brave physicists have proposed ways to make black holes - or at least event horizons - in the laboratory. The basic idea behind these 'artificial black holes' is not to compress a large amount of mass into a small volume, but to reduce the speed of light in a moving medium to less than the speed of the medium and so create an event horizon. The parallels with real black holes are not exact but the experiments could shed new light on a variety of phenomena. The first challenge, however, is to get money for the research. One year on from a high-profile meeting on artificial black holes in London, for instance, the UK

  6. Hydrometallurgical Recovery of Indium from Flat-Panel Displays of Spent Liquid Crystal Televisions

    Science.gov (United States)

    Inoue, Katsutoshi; Alam, Shafiq

    2015-02-01

    A recovery process for indium from waste liquid crystal display panels was developed on the basis of hydrometallurgical technology. The powdered sample was leached with 3 M HCl to extract its various metal constituents (indium, aluminum, tin, etc.). The mutual separation and subsequent recovery of the dissolved metals was achieved using two column adsorption tests: The first column was packed with a porous resin impregnated with Aliquat 336, a commercially available solvent extraction reagent based on a quaternary ammonium compound, and the resin contained in the second column was impregnated with Cyanex 923, also a commercially available solvent extraction reagent based on trialkylphosphine oxide. In the first column, tin, iron, and zinc were removed from the leach liquor. In the second column, only indium was selectively recovered. The metal ions trapped in these columns were eluted with 0.1 M H2SO4, yielding a solution purified indium solution with a concentration 10 times that of the feed solution.

  7. Evolution of massive black holes

    OpenAIRE

    Volonteri, Marta

    2007-01-01

    Supermassive black holes are nowadays believed to reside in most local galaxies. Accretion of gas and black hole mergers play a fundamental role in determining the two parameters defining a black hole: mass and spin. I briefly review here some of the physical processes that are conducive to the evolution of the massive black hole population. I'll discuss black hole formation processes that are likely to place at early cosmic epochs, and how massive black hole evolve in a hierarchical Universe...

  8. Black holes matter

    DEFF Research Database (Denmark)

    Kragh, Helge Stjernholm

    2016-01-01

    Review essay, Marcia Bartusiak, Black Hole: How an Idea Abandoned by Newtonians, Hated by Einstein, and Gambled On by Hawking Became Loved (New Haven: Yale University Press, 2015).......Review essay, Marcia Bartusiak, Black Hole: How an Idea Abandoned by Newtonians, Hated by Einstein, and Gambled On by Hawking Became Loved (New Haven: Yale University Press, 2015)....

  9. Scattering by Black Holes

    CERN Document Server

    Andersson, N

    2000-01-01

    This is a chapter on Black-hole Scattering that was commissioned for an Encyclopaedia on Scattering edited by Pike and Sabatier, to be published by Academic Press. The chapter surveys wave propagation in black-hole spacetimes, diffraction effects in wave scattering, resonances, quasinormal modes and related topics.

  10. Arbitrators, Blacks and Discipline

    Science.gov (United States)

    Jennings, Kenneth

    1975-01-01

    A discussion of the handling of disciplinary problems of black employees concludes that management should be concerned because of the effect that grievance resolution may have on the company's overall employee discipline program and the additional appeal alternatives available to the black employee. (Author/EA)

  11. Noncommutative Singular Black Holes

    International Nuclear Information System (INIS)

    In this paper, applying the method of coordinate coherent states to describe a noncommutative model of Vaidya black holes leads to an exact (t - r) dependence of solution in terms of the noncommutative parameter σ. In this setup, there is no black hole remnant at long times.

  12. Noncommutative Singular Black Holes

    Science.gov (United States)

    Hamid Mehdipour, S.

    2010-11-01

    In this paper, applying the method of coordinate coherent states to describe a noncommutative model of Vaidya black holes leads to an exact (t — r) dependence of solution in terms of the noncommutative parameter σ. In this setup, there is no black hole remnant at long times.

  13. Black Hole Dynamic Potentials

    Indian Academy of Sciences (India)

    Koustubh Ajit Kabe

    2012-09-01

    In the following paper, certain black hole dynamic potentials have been developed definitively on the lines of classical thermodynamics. These potentials have been refined in view of the small differences in the equations of the laws of black hole dynamics as given by Bekenstein and those of thermodynamics. Nine fundamental black hole dynamical relations have been developed akin to the four fundamental thermodynamic relations of Maxwell. The specific heats , and , have been defined. For a black hole, these quantities are negative. The d equation has been obtained as an application of these fundamental relations. Time reversible processes observing constancy of surface gravity are considered and an equation connecting the internal energy of the black hole , the additional available energy defined as the first free energy function , and the surface gravity , has been obtained. Finally as a further application of the fundamental relations, it has been proved for a homogeneous gravitational field in black hole space times or a de Sitter black hole that $C_{\\Omega,\\Phi}-C_{J,Q}=\\kappa \\left[\\left(\\dfrac{\\partial J}{\\partial \\kappa}\\right)_{\\Omega,\\Phi}\\left(\\dfrac{\\partial \\Omega}{\\partial \\kappa}\\right)_{J,Q}+\\left(\\dfrac{\\partial Q}{\\partial \\kappa}\\right)_{\\Omega,\\Phi}\\left(\\dfrac{\\partial\\Phi}{\\partial \\kappa}\\right)_{J,Q}\\right]$. This is dubbed as the homogeneous fluid approximation in context of the black holes.

  14. Black Craftsmen Through History.

    Science.gov (United States)

    Myers, Robin

    This report traces the evolution of the black craftsmen from ancient Egypt to the present. Special attention is given to the restricted use of black craftsmen under slavery, and the added problems they faced after being freed. Business and union discimination is described, along with recent government and private efforts to achieve equal…

  15. Charcoal production with by-product recovery

    Energy Technology Data Exchange (ETDEWEB)

    Laxamana, N.B.

    1982-01-01

    The carbonization of Gonacaryum calleryanum, Cananga odorata, Sandoricum koetjape, and Dillenia philippinensis at 315-375 degrees gave charcoal, pyroligneous liquor and settled for in a yield of 36-47%, 38-49% and 1-5%, respectively.

  16. Deliberation of Chinese liquor%中国白酒六问

    Institute of Scientific and Technical Information of China (English)

    沈怡方; 赵彤

    2013-01-01

    Drinking for health: famous liquor contains a variety of trace elements beneficial to human health, and the conclusion that moderate drinking is good for health has also been proved by clinical practice;drinking with scientific manner:this means the recognition of individual differences, maintenance of good drinking attitude and attention being paid to the drinking environment and condition;moderate drinking:the optimal drinking dosage for normal adult is 50mL of 52%volliquor, 70mL of 38%vol liquor, 630mL(one bottle) of 4%vol beer, 180mL of 16%vol~18%volrice wine, or 180mL of 12%volwine;benefit of moderate drinking:moderate drinking reduces the prevalence and mortality rates of coronary heart disease, promotes blood circulation, eases anxiety and nervousness, increases appetite and improves digestion; harmful effects of excessive alcohol consumption: it causes physical and psychological damage such as liver damage, gastrointestinal disorders, headaches and coma as well as a range of social hazards due to the alcohol dependence (alcoholism), alcohol abuse and chronic poisoning; civilized drinking manner: it includes a polite and restrained toast manner, and elimination of undesirable behavior such as forcing people to drinking.%饮酒有利健康:名优白酒含有多种有益人体健康的微量成分,临床实践也证明了适量饮酒有益健康这一结论;科学饮酒:含义是承认个体差异、保持良好的饮酒心态、注意饮酒的环境和条件;适量饮酒:正常成年人的适量饮酒的最佳量为:52%vol白酒50mL、38%vol白酒70mL、4%vol啤酒630mL (1瓶)、16%vol~18%vol黄酒180mL、12%vol葡萄酒180mL;适量饮酒的益处:降低冠心病的患病率和死亡率、促进血液循环、缓和忧虑和紧张心理、增进食欲,提高消化能力;过量饮酒的害处:损害肝脏、胃肠紊乱、引起头痛、昏迷,除身心造成损伤外,酒依赖(酒瘾)、酒滥用和慢性酒中毒还会造

  17. Metal recycle and recovery

    OpenAIRE

    Hussain, Zaib-un-nisa

    1999-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. The development of techniques for the removal and recovery of metals from industrial effluent taking account of the consequences of the definition of waste in the Basel Convention on transfrontier shipment of waste is reported. The use of fluidised bed cell electrolysis in the recovery of metals from dilute solutions is investigated, and the conditions for recovery optimised. For the first...

  18. Beyond enhanced recovery?

    DEFF Research Database (Denmark)

    Jørgensen, Christoffer C; Kehlet, Henrik

    2014-01-01

    We read with great interest the special article by Smart and Daniels discussing several important topics of perioperative care, especially regarding lack of consensus on the definition of "postoperative recovery", and need for further understanding of the pathogenic mechanisms. However, we disagree...... that a "new, clearly defined standard of what "recovery" actually is", demands "a look beyond enhanced recovery"(1) for several reasons. This article is protected by copyright. All rights reserved....

  19. Fluctuating Black Hole Horizons

    CERN Document Server

    Mei, Jianwei

    2013-01-01

    In this paper we treat the black hole horizon as a physical boundary to the spacetime and study its dynamics following from the Gibbons-Hawking-York boundary term. Using the Kerr black hole as an example we derive an effective action that describes, in the large wave number limit, a massless Klein-Gordon field living on the average location of the boundary. Complete solutions can be found in the small rotation limit of the black hole. The formulation suggests that the boundary can be treated in the same way as any other matter contributions. In particular, the angular momentum of the boundary matches exactly with that of the black hole, suggesting an interesting possibility that all charges (including the entropy) of the black hole are carried by the boundary. Using this as input, we derive predictions on the Planck scale properties of the boundary.

  20. Lifshitz Topological Black Holes

    CERN Document Server

    Mann, R B

    2009-01-01

    I find a class of black hole solutions to a (3+1) dimensional theory gravity coupled to abelian gauge fields with negative cosmological constant that has been proposed as the dual theory to a Lifshitz theory describing critical phenomena in (2+1) dimensions. These black holes are all asymptotic to a Lifshitz fixed point geometry and depend on a single parameter that determines both their area (or size) and their charge. Most of the solutions are obtained numerically, but an exact solution is also obtained for a particular value of this parameter. The thermodynamic behaviour of large black holes is almost the same regardless of genus, but differs considerably for small black holes. Screening behaviour is exhibited in the dual theory for any genus, but the critical length at which it sets in is genus-dependent for small black holes.

  1. Bench-scale Kinetics Study of Mercury Reactions in FGD Liquors

    Energy Technology Data Exchange (ETDEWEB)

    Gary Blythe; John Currie; David DeBerry

    2008-03-31

    This document is the final report for Cooperative Agreement DE-FC26-04NT42314, 'Kinetics Study of Mercury Reactions in FGD Liquors'. The project was co-funded by the U.S. DOE National Energy Technology Laboratory and EPRI. The objective of the project has been to determine the mechanisms and kinetics of the aqueous reactions of mercury absorbed by wet flue gas desulfurization (FGD) systems, and develop a kinetics model to predict mercury reactions in wet FGD systems. The model may be used to determine optimum wet FGD design and operating conditions to maximize mercury capture in wet FGD systems. Initially, a series of bench-top, liquid-phase reactor tests were conducted and mercury species concentrations were measured by UV/visible light spectroscopy to determine reactant and byproduct concentrations over time. Other measurement methods, such as atomic absorption, were used to measure concentrations of vapor-phase elemental mercury, that cannot be measured by UV/visible light spectroscopy. Next, a series of bench-scale wet FGD simulation tests were conducted. Because of the significant effects of sulfite concentration on mercury re-emission rates, new methods were developed for operating and controlling the bench-scale FGD experiments. Approximately 140 bench-scale wet FGD tests were conducted and several unusual and pertinent effects of process chemistry on mercury re-emissions were identified and characterized. These data have been used to develop an empirically adjusted, theoretically based kinetics model to predict mercury species reactions in wet FGD systems. The model has been verified in tests conducted with the bench-scale wet FGD system, where both gas-phase and liquid-phase mercury concentrations were measured to determine if the model accurately predicts the tendency for mercury re-emissions. This report presents and discusses results from the initial laboratory kinetics measurements, the bench-scale wet FGD tests, and the kinetics modeling

  2. SOURSOP LIQUOR PROCESSING: INFLUENCE OF THE PROCESS VARIABLES ON THE PHYSICAL AND CHEMICAL CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    EMANUEL NETO ALVES DE OLIVEIRA

    2016-01-01

    Full Text Available Soursop is a well - appreciated tropical fruit, both in natura and in the form of juices and nectars. Despite its wide acceptance, there is lack of its use in the preparation of other products, such as alcoholic beverages. The objective of this study was to prepare soursop liquors by varying the concentrations of pulp and sucrose syrup with different contents of total soluble solids and to evaluate the effects of these on the physical and chemical characteristics of the beverages. In the production process, the pulp (300, 400 and 500 g was macerated with distilled alcohol for 20 days, after which it was filtered, added to the syrup (50, 60 and 70 ° Brix, bottled in polyethylene bottles and subjected to an accelerated aging. All drinks resulted in alcohol levels (15.25 to 16.69% v/v and total sugars (12.63 to 17.97% in accordance with the standards required by law. The experiments made with the lowest concentration of pulp showed the highest yields (84.17 and 85.25%. First - order models with interactions and 95% confidence intervals were obtained. The pulp consisted of the most significant factor, influencing the largest number of responses (yield, alcohol content, dry residue, titratable acidity, titratable acidity/soluble solids ratio and luminosity. The larger coefficient of determination (R 2 values were found in the models adjusted to the data of yield, dry residue, total soluble solids, titratable acidity and total sugars, which were significant and predictive, showing values greater than 0.97.

  3. Efficacy of different essential oils in modulating rumen fermentation in vitro using buffalo rumen liquor

    Directory of Open Access Journals (Sweden)

    Debashis Roy

    2014-04-01

    Full Text Available Aim: Present study was conducted to examine the modulatory effect of different essential oils on rumen fermentation pattern in vitro using wheat straw based diet (concentrate: wheat straw 50:50. Materials and Methods: Four essential oils i.e. cinnamon, garlic, oregano and rosemary oils were tested at concentration of 0, 30, 300 and 600 mg/litre (ppm of total culture fluid using in vitro gas production technique. Total gas production, methane production, nutrient degradability, volatile fatty acid (VFA production and ammonia nitrogen concentration were studied in vitro using buffalo rumen liquor. Results: Results indicated that all four essential oils decreased gas production significantly (P<0.05 at 600ppm concentration. However, in case of garlic oil, 300 ppm concentration was also found to be effective in decreasing total gas production. Reduction in methane production was found maximum (P<0.05 at higher doses in most of the oils. Maximum reduction in methane was noticed with garlic oil at 600ppm dose. Ammonia-N concentration was also decreased significantly (P<0.05 with essential oils and was found minimum with oregano oil at 600 ppm dose. Partition factor was found to be significantly (P<0.05 higher in 600 ppm concentration of garlic and oregano oil. The degradability of dry matter decreased significantly with higher concentration of essential oil in most of treatment combinations. Conclusion: Supplementation with different essential oils on wheat straw based diet modulates rumen fermentation and reduced methane and ammonia- N production and improved utilization of nutrients.

  4. Effects of feeding different levels of corn steep liquor on the performance of fattening lambs.

    Science.gov (United States)

    Azizi-Shotorkhoft, A; Sharifi, A; Mirmohammadi, D; Baluch-Gharaei, H; Rezaei, J

    2016-02-01

    This study was conducted to assess the effect of feeding corn steep liquor (CSL) on in vivo digestibility, ruminal pH, ammonia and hydrolytic enzyme activities, blood metabolites, feed intake (FI) and growth performance in fattening lambs. The CSL is a by-product of wet milling process of maize starch industry. The crude protein (CP), rumen-degradable protein (RDP), lactic acid and metabolisable energy contents of this by-product were 420, 324, 200 g/kg dry matter (DM) and 12.6 MJ/kg DM respectively. Twenty-seven male Moghani lambs were assigned randomly into three groups of nine lambs each in a completely randomised design. Three iso-energetic and iso-nitrogenous diets containing different levels (0, 50 or 100 g/kg dry matter) of CSL were offered ad libitum three times a day. Forage to concentrate ratio of the diets was 30:70. With inclusion of CSL in diet, the contents of canola meal, fish meal, wheat bran, corn grain and sugar beet pulp were decreased. The contents of DM, ash-free neutral detergent fibre (NDFom), ether extract, starch, Ca and S were numerically lower, but soluble protein, RDP and non-fibre carbohydrates were greater in the diets containing CSL in comparison with the control diet. The lambs fed with the diets containing CSL had lower [linear (L), p diet free of CSL. Ruminal ammonia-N concentration increased (L, p diet. Carboxymethyl cellulase and filter paper-degrading activities decreased (L, p diet without CSL. Dietary inclusion of CSL resulted in linear decreases (L, p free acid detergent fibre, and average daily gain. However, the feed conversion ratio was similar among the experimental animals. Overall, feeding CSL up to 100 g/kg diet DM in lamb resulted in reductions of rumen fibrolytic microbial enzyme activities, in vivo digestibility, FI and growth performance, but rumen proteases activity increased. PMID:25958906

  5. 三谈《中国白酒国际化浅见》——“三五定律”不符合我国白酒香型众多的特点%Opinions on the Internationalization of Chinese Liquor The Three Five Law Incompatible with the Features of Chinese Liquor(Too Many Liquor Flavor Types)

    Institute of Scientific and Technical Information of China (English)

    钟国辉; 邹海晏; 周仁忠

    2012-01-01

    从我国白酒香型众多的文化层面、群众消费习惯以及循环经济建设等诸多方面进行分析探讨,指出"三五定律"不合国情。当前宜应采取"百花齐放"的方针,通过市场去发现白酒特有的发展规律。%Through the analysis of Chinese consumption habits,circular economy construction,and cultural backgrounds of liquor flavor types,it was pointed out that the three five law was incompatible with the features of Chinese liquor and we should adopt the policy of letting a thousand flowers bloom in liquor-making industry and further find out the unique development rules of liquor through market competition.(Tran.by YUE Yang)

  6. Mechanization of Brewing Liquor%我国白酒机械化酿造技术回顾与展望

    Institute of Scientific and Technical Information of China (English)

    汪江波; 王炫; 黄达刚; 庄椿虎; 陈茂彬

    2011-01-01

    科技的进步推动了传统白酒酿造的机械化发展,然而中国大陆地区的白酒在酿造环节的机械化程度仍较低.从发酵方法和香型两方面,比较了不同类型白酒的机械化应用状况;对台湾地区白酒及日本烧酒的机械化酿造进行了分析.台湾地区的白酒在酿造各环节已实现连续性机械化操作,这对大陆地区白酒如何提高机械化酿造水平有良好的启示.汲取国内外白酒的机械化经验,三麦酒业对机械设备进行了自主创新,各设备间的衔接良好,使整个酿酒生产基本实现了机械化.我国白酒机械化发展前景广阔,应该继续加强科技研发和应用,使我国白酒生产最终实现机械化.%The different types of mechanical applications of liquor from both the fermentation and flavor of liquor are compared in this paper based on a review of the history of mechanization of brewing liquor in the mainland of China.Mechanized liquor-brewing methods of Taiwan liquor and Japan shochu were analysed as well.Taiwan liquor has been achieved continuous operation in various aspects of mechanization,which has a good inspiration for how to increase mechanization level of liquor-brewing in the mainland area.Hubei Three Grains Wine Industry Group has learned the experience in domestic and foreign mechanized liquor-brewing by making innovation in mechanized liquor-brewing on its own to achieve a good interface between the various devices so that the whole wine production mechanization has basically realized.

  7. Separation of ammonia from the ammonia rinsing liquor of resin adsorbed molybdenum and tungsten by membrane technology%膜法分离氨淋洗吸附钼钨树脂后淋洗液中的氨

    Institute of Scientific and Technical Information of China (English)

    胡磊; 肖连生; 张贵清

    2012-01-01

    以钨湿法冶金中的一种氨淋洗吸附钼钨树脂后淋洗液为料液,采用膜分离技术实现氨的分离.通过比较多种纳滤和反渗透膜对钼钨与氨的分离效果,从中选择了一种合适的低压反渗透膜,考察了膜分离过程中原料液浓度、操作压力、浓缩比、温度因素对透过液通量、钼钨截留率、氨回收率(或透过率)以及钼钨与氨分离系数的影响,在操作压力2.41MPa,温度在36℃,浓缩比为4∶1的条件下,透过液通量达27 L/(m2·h),Mo、WO3的截留率接近100%,Mo、WO3与NH3的分离系数分别达18和51,料液中76%的氨得到回收.以实验室的试验结果为依据,选用低压反渗透膜用于工业生产,取得了良好的效果.%A membrane technology was used to separate ammonia from the ammonia rinsing liquor of resin adsorbed molybdenum and tungsten in the process of tungsten hydromctallurgy. Compared with the separating effect of molybdenum-tungsten from ammonia of various nanofiltration membranes and reverse osmosis membranes,a low-pressure RO membrane was selected. The effects of feed liquor concentration, operation pressure,concentration ratio and temperature on the parameters of permeation flux,molybdenum and tungsten retention rate,ammonia recovery rate(or transparence rate),the separation coefficient of Mo and WO3 over ammonia were studied. And the optimum technical conditions, were obtained: operation pressure 2. 41 MPa, temperature 36℃ with concentration ratio 4: 1. Under these conditions, the permeation flux reached 27 L/(m2 · h) with nearly 100% retention rate of Mo and WO3, the recovery rate of ammonia reached 76% and the separation coefficient of Mo and WO3 over NH3 were 18 and 51, respectively. The successful application of this process in industry has delivered good economical benefits.

  8. 酱香型白酒理化指标的Logistic模型%Logistic model of the quality of Maotai-flavor liquor

    Institute of Scientific and Technical Information of China (English)

    陈引兰; 尹婷

    2015-01-01

    以酱香型白酒为样本,对其理化指标进行分析,利用SAS软件,采用Logistic回归方法建立了酱香型白酒理化指标的数学模型,从而定量地分析了各理化指标对酱香型白酒香型特征的影响,并进行模型统计分析,充分说明各特征成分对酱香型白酒品质特征产生怎样的影响。%In this paper, Maotai -flavor liquor was selected, the impaction of physicochemical indexes on the quality of liq-uor is analyzed . By SAS software and Logistic regression method, the mathematical model of Maotai -flavor liquor with phys-icochemical indexes is established, which gives the influence of each physicochemical indexes of Maotai -flavor liquor by quantitative analysis. And the statistical analysis of the model is obtained, which shows how the aroma components of Maotai-flavor liquor affects.

  9. The removal of radioactive radium (Ra226) from chloride liquors by columnar ion exchange in the presence of calcium, magnesium and iron cations

    International Nuclear Information System (INIS)

    The purpose of this work was to study the feasibility of controlling the discharge of soluble Ra226, in the presence of Ca, Mg and Fe cations in synthetic chloride effluents, by adsorption on cation exchange resins to decrease Ra226-concentrations to federal environmental levels of 10 pCi Ra226/litre. Environmentally acceptable effluents were produced from synthetic chloride feed liquors containing 10 ppm Ca, 5 ppm Mg, 120 ppm Fe plus 20,000 pCi Ra226/litre. Environmentally acceptable effluents were not produced, by cation exchange, from a synthetic chloride liquor containing 490 ppm Ca, 97 ppm Mg, 720 ppm Fe in addition to 20,000 pCi Ra226/litre. The mass interference of the Ca + Mg + Fe cation concentrations in the feed liquor was in over-powering competition, for resin sites, with the Ra226-cations. To obtain realistic data, the adsorption process should be reexamined using a chloride liquor produced under optimal chloride leaching conditions of an Elliot Lake uranium ore. This would, in all probability, reveal other cations unavailable in the synthetic chloride liquors

  10. Black Youth Unemployment and the Black Family.

    Science.gov (United States)

    Hoskins, Linus A.

    This paper analyzes the results of a survey conducted to ascertain the attitudes of 400 employers, youth, and academic/community professionals in Los Angeles, Chicago and Washington, D.C., toward an approach to Black youth unemployment centered on the creation of jobs and training among minority businesses in selected metropolitan areas. Minority…

  11. Black Hole Critical Phenomena Without Black Holes

    CERN Document Server

    Liebling, S L

    2000-01-01

    Studying the threshold of black hole formation via numerical evolution has led to the discovery of fascinating nonlinear phenomena. Power-law mass scaling, aspects of universality, and self-similarity have now been found for a large variety of models. However, questions remain. Here I briefly review critical phenomena, discuss some recent results, and describe a model which demonstrates similar phenomena without gravity.

  12. On the Charter Question: Black Marxism and Black Nationalism

    Science.gov (United States)

    Stern, Mark; Hussain, Khuram

    2015-01-01

    This article brings two black intellectual traditions to bear on the question of charter schools: black Marxism and black nationalism. The authors examine the theoretical and rhetorical devices used to talk about charters schools by focusing on how notions of "black liberation" are deployed by the charter movement, and to what end. The…

  13. Waste Soybean Oil and Corn Steep Liquor as Economic Substrates for Bioemulsifier and Biodiesel Production by Candida lipolytica UCP 0998.

    Science.gov (United States)

    Souza, Adriana Ferreira; Rodriguez, Dayana M; Ribeaux, Daylin R; Luna, Marcos A C; Lima E Silva, Thayse A; Andrade, Rosileide F Silva; Gusmão, Norma B; Campos-Takaki, Galba M

    2016-01-01

    Almost all oleaginous microorganisms are available for biodiesel production, and for the mechanism of oil accumulation, which is what makes a microbial approach economically competitive. This study investigated the potential that the yeast Candida lipolytica UCP0988, in an anamorphous state, has to produce simultaneously a bioemulsifier and to accumulate lipids using inexpensive and alternative substrates. Cultivation was carried out using waste soybean oil and corn steep liquor in accordance with 2² experimental designs with 1% inoculums (10⁷ cells/mL). The bioemulsifier was produced in the cell-free metabolic liquid in the late exponential phase (96 h), at Assay 4 (corn steep liquor 5% and waste soybean oil 8%), with 6.704 UEA, IE24 of 96.66%, and showed an anionic profile. The emulsion formed consisted of compact small and stable droplets (size 0.2-5 µm), stable at all temperatures, at pH 2 and 4, and 2% salinity, and showed an ability to remove 93.74% of diesel oil from sand. The displacement oil (ODA) showed 45.34 cm² of dispersion (central point of the factorial design). The biomass obtained from Assay 4 was able to accumulate lipids of 0.425 g/g biomass (corresponding to 42.5%), which consisted of Palmitic acid (28.4%), Stearic acid (7.7%), Oleic acid (42.8%), Linoleic acid (19.0%), and γ-Linolenic acid (2.1%). The results showed the ability of C. lipopytica to produce both bioemulsifier and biodiesel using the metabolic conversion of waste soybean oil and corn steep liquor, which are economic renewable sources. PMID:27669227

  14. Biopulping of sugarcane bagasse and decolorization of kraft liquor by the laccase produced by Klebsiella aerogenes NCIM 2098

    Directory of Open Access Journals (Sweden)

    Jha H.

    2013-12-01

    Full Text Available Aims: Laccase, a copper-containing enzyme, oxidizes variety of aromatic compounds. Since laccase is essential for lignin degradation, it can be used for lignin removal in the pulp and paper industry (biopulping. Laccase is also employed as a dechlorinating agent (biobleaching, along with the removal of phenolic and other aromatic pollutants. In the present investigation it was aimed to employ the laccase produced by the bacterium Klebsiella aerogenes along with the bacterium itself in biopulping of sugarcane bagasse and biobleaching of kraft liquor effluent. Methodology and results: A laccase was isolated from the bacterium K. aerogenes, purified to homogeneity and characterized. The enzyme was purified by conventional techniques following salt precipitation, ion exchange chromatography, and affinity chromatography on Con A sepharose. The purified laccase was found to be monomeric glycoprotein with a Mr of 64 kDa when measured by Sephadex G-200 gel chromatography and SDS-PAGE. The Vmax and Km of laccase towards the substrate guaiacol was determined. The optimum pH of the laccase was found to be 5.0. biopulping and biobleaching activities were determined by TAPPI standard methods. Treatment of sugarcane baggase by K. aerogenes also significantly reduced lignin content of the bagasse. Conclusion, significance and impact of study: The bacterium K. aerogenes and a laccase produced by it were used separately for biopulping of sugarcane bagasse and biobleaching of kraft liquor effluent. Treatment with both brought significant reduction in lignin content and kappa number of the pulp. The handsheets prepared from the treated pulp showed improved brightness without affecting the strength properties of paper. The bacterium and the laccase efficiently decolorized the kraft liquor proving to have biobleaching potential.

  15. Waste Soybean Oil and Corn Steep Liquor as Economic Substrates for Bioemulsifier and Biodiesel Production by Candida lipolytica UCP 0998

    Science.gov (United States)

    Souza, Adriana Ferreira; Rodriguez, Dayana M.; Ribeaux, Daylin R.; Luna, Marcos A. C.; Lima e Silva, Thayse A.; Andrade, Rosileide F. Silva; Gusmão, Norma B.; Campos-Takaki, Galba M.

    2016-01-01

    Almost all oleaginous microorganisms are available for biodiesel production, and for the mechanism of oil accumulation, which is what makes a microbial approach economically competitive. This study investigated the potential that the yeast Candida lipolytica UCP0988, in an anamorphous state, has to produce simultaneously a bioemulsifier and to accumulate lipids using inexpensive and alternative substrates. Cultivation was carried out using waste soybean oil and corn steep liquor in accordance with 22 experimental designs with 1% inoculums (107 cells/mL). The bioemulsifier was produced in the cell-free metabolic liquid in the late exponential phase (96 h), at Assay 4 (corn steep liquor 5% and waste soybean oil 8%), with 6.704 UEA, IE24 of 96.66%, and showed an anionic profile. The emulsion formed consisted of compact small and stable droplets (size 0.2–5 µm), stable at all temperatures, at pH 2 and 4, and 2% salinity, and showed an ability to remove 93.74% of diesel oil from sand. The displacement oil (ODA) showed 45.34 cm2 of dispersion (central point of the factorial design). The biomass obtained from Assay 4 was able to accumulate lipids of 0.425 g/g biomass (corresponding to 42.5%), which consisted of Palmitic acid (28.4%), Stearic acid (7.7%), Oleic acid (42.8%), Linoleic acid (19.0%), and γ-Linolenic acid (2.1%). The results showed the ability of C. lipopytica to produce both bioemulsifier and biodiesel using the metabolic conversion of waste soybean oil and corn steep liquor, which are economic renewable sources. PMID:27669227

  16. Waste Soybean Oil and Corn Steep Liquor as Economic Substrates for Bioemulsifier and Biodiesel Production by Candida lipolytica UCP 0998.

    Science.gov (United States)

    Souza, Adriana Ferreira; Rodriguez, Dayana M; Ribeaux, Daylin R; Luna, Marcos A C; Lima E Silva, Thayse A; Andrade, Rosileide F Silva; Gusmão, Norma B; Campos-Takaki, Galba M

    2016-09-23

    Almost all oleaginous microorganisms are available for biodiesel production, and for the mechanism of oil accumulation, which is what makes a microbial approach economically competitive. This study investigated the potential that the yeast Candida lipolytica UCP0988, in an anamorphous state, has to produce simultaneously a bioemulsifier and to accumulate lipids using inexpensive and alternative substrates. Cultivation was carried out using waste soybean oil and corn steep liquor in accordance with 2² experimental designs with 1% inoculums (10⁷ cells/mL). The bioemulsifier was produced in the cell-free metabolic liquid in the late exponential phase (96 h), at Assay 4 (corn steep liquor 5% and waste soybean oil 8%), with 6.704 UEA, IE24 of 96.66%, and showed an anionic profile. The emulsion formed consisted of compact small and stable droplets (size 0.2-5 µm), stable at all temperatures, at pH 2 and 4, and 2% salinity, and showed an ability to remove 93.74% of diesel oil from sand. The displacement oil (ODA) showed 45.34 cm² of dispersion (central point of the factorial design). The biomass obtained from Assay 4 was able to accumulate lipids of 0.425 g/g biomass (corresponding to 42.5%), which consisted of Palmitic acid (28.4%), Stearic acid (7.7%), Oleic acid (42.8%), Linoleic acid (19.0%), and γ-Linolenic acid (2.1%). The results showed the ability of C. lipopytica to produce both bioemulsifier and biodiesel using the metabolic conversion of waste soybean oil and corn steep liquor, which are economic renewable sources.

  17. Uranium and thorium recovery in thorianite ore-preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Gaiotte, Joao V.M. [Universidade Federal de Alfenas, Pocos de Caldas, MG (Brazil); Villegas, Raul A.S.; Fukuma, Henrique T., E-mail: rvillegas@cnen.gov.br, E-mail: htfukuma@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Pocos de Caldas, MG (Brazil). Lab. de Pocos de Caldas

    2011-07-01

    This work presents the preliminary results of the studies aiming to develop a hydrometallurgical process to produce uranium and thorium concentrates from thorianite ore from Amapa State, Brazil. This process comprises two major parts: acid leaching and Th/U recovery using solvent extraction strategies. Thorianite ore has a typical composition of 60 - 70% of thorium, 8 - 10% lead and 7 - 10% uranium. Sulfuric acid leaching operational conditions were defined as follows: acid/ore ratio 7.5 t/t, ore size below 65 mesh (Tyler), 2 hours leaching time and temperature of 100 deg C. Leaching tests results showed that uranium and thorium recovery exceeded 95%, whereas 97% of lead ore content remained in the solid form. Uranium and thorium simultaneous solvent extraction is necessary due to high sulfate concentration in the liquor obtained from leaching, so the Primene JM-T primary anime was used for this extraction step. Aqueous raffinate from extraction containing sulfuric acid was recycled to the leaching step, reducing acid uptake around 60%, to achieve a net sulfuric acid consumption of 3 t/t of ore. Uranium and thorium simultaneous stripping was performed using sodium carbonate solution. In the aqueous stripped it was added sulfuric acid at pH 1.5, followed by a second solvent extraction step using the tertiary amine Alamine 336. The following stripping step was done with a solution of sodium chloride, resulting in a final solution of 23 g L-1 uranium. (author)

  18. The Best Treatment Effects of Active Carbon on Low-alcohol Liquor of Different Alcoholicity%不同酒度低度白酒活性炭处理最佳效果

    Institute of Scientific and Technical Information of China (English)

    代汉聪; 张宿义; 谢明; 李云辉

    2012-01-01

    对不同酒度低度白酒活性炭除浊、香味损失及化学性能等指标进行了研究。结果表明,同一酒度白酒进行活性炭处理,随着活性炭用量的增加,酒中己酸乙酯、乳酸乙酯、乙酸乙酯、丁酸乙酯等色谱骨架成分及棕榈酸乙酯、亚油酸乙酯、油酸乙酯等高级脂肪酸乙酯的含量均有一定程度的降低;总酸、总酯也随着活性炭添加量的增加有一定程度减小,且酒质香浓感减弱,酒体抗冻能力增强。用同量活性炭对不同酒度白酒进行处理,酒度越高,其处理降度后的低度白酒微量香味成分越丰富,酒质香浓感越好,但酒体抗冻能力越弱。新处理工艺能够增加酒体香浓感,且大幅度提升酒体口感质量。%Active carbon was used for turbidity-removal of low-alcohol liquor of different alcoholicity,and the loss of liquor aroma and the change in its chemical indexes were studied.The results indicated that,for liquor of the same alcoholicity,with the increase of active carbon use level,the content of ethyl caproate,ethyl lactate,ethyl acetate,ethyl butyrate,palmitic acid ethyl ester,ethyl linoleate,ethyl oleate and other higher fatty ethyl esters reduced to some extent in the liquor,the content of total acids and total esters also decreased and liquor aroma weakened,however,liquor antifreeze capacity enhanced;for liquor of different alcoholicity but treated by the same use level of active carbon,the higher of liquor alcoholicity,the richer of trace flavoring components in treated liquor and the better of liquor quality and liquor aroma,however,the weaker of liquor antifreeze capacity.The new processing techniques could enhance the aroma of liquor body and greatly improve liquor taste and liquor quality.

  19. 草甘膦母液的沉淀处理研究%Precipitation Treatment of Glyphosate Mother Liquor

    Institute of Scientific and Technical Information of China (English)

    刘志英; 徐炎华; 赵贤广

    2012-01-01

    [目的]探究有效去除草甘膦母液中亚磷酸根的方法.[方法]采用化学沉淀法研究了沉淀剂种类、pH、投加量、静置时间等因素对草甘膦母液中亚磷酸根去除率的影响.[结果]加入AlCl3·6H20,当pH为9、投加量0.24 mol/L、快搅30 s、强度300 r/min、慢搅2.5min、强度100 r/min、静置时间为30 min时对草甘膦母液中亚磷酸根的去除效果达到60%以上.[结论]为膜技术在草甘膦母液资源化处理中的工业化推广与应用提供了理论依据.%[ Objective] The aim was to study a removal method of HP032 - from glyphosate mother liquor. [ Method] Effects of precipitant quantity and type,pH and standing time on the removal rate of HPO32- from glyphosate mother liquor were studied by chemical precipitation method.[Result] When the initial pH was 9,the following pretreatment procedure resulted in the removal rate of more than 60% of the HP03 2- from glyphosate mother liquor;the addition of 0.24 mol/L A1C13 · 6H2O,stirring at 300 r/min for30 s and 100 r/min for 2.5 min,followed by standing for 30 min. [ Conclusion] The research result provides theoretical basis for the industrial popularization and application of membrane technology in resourceful treatment of glyphosate mother liquor.

  20. Brewer's spent grain and corn steep liquor as alternative culture medium substrates for proteinase production by Streptomyces malaysiensis AMT-3

    Directory of Open Access Journals (Sweden)

    Rodrigo Pires do Nascimento

    2011-12-01

    Full Text Available Brewer's spent grain and corn steep liquor or yeast extract were used as the sole organic forms for proteinase production by Streptomyces malaysiensis in submerged fermentation. The influence of the C and N concentrations, as well as the incubation periods, were assessed. Eight proteolytic bands were detected through gelatin-gel-electrophoresis in the various extracts obtained from the different media and after different incubation periods, with apparent molecular masses of 20, 35, 43, 50, 70, 100, 116 and 212 kDa. The results obtained suggest an opportunity for exploring this alternative strategy for proteinases production by actinomycetes, using BSG and CSL as economically feasible substrates.