WorldWideScience

Sample records for bite force analysis

  1. Comparative analysis of methods for determining bite force in the spiny dogfish Squalus acanthias.

    Science.gov (United States)

    Huber, Daniel Robert; Motta, Philip Jay

    2004-01-01

    Many studies have identified relationships between the forces generated by the cranial musculature during feeding and cranial design. Particularly important to understanding the diversity of cranial form amongst vertebrates is knowledge of the generated magnitudes of bite force because of its use as a measure of ecological performance. In order to determine an accurate morphological proxy for bite force in elasmobranchs, theoretical force generation by the quadratomandibularis muscle of the spiny dogfish Squalus acanthias was modeled using a variety of morphological techniques, and lever-ratio analyses were used to determine resultant bite forces. These measures were compared to in vivo bite force measurements obtained with a pressure transducer during tetanic stimulation experiments of the quadratomandibularis. Although no differences were found between the theoretical and in vivo bite forces measured, modeling analyses indicate that the quadratomandibularis muscle should be divided into its constituent divisions and digital images of the cross-sections of these divisions should be used to estimate cross-sectional area when calculating theoretical force production. From all analyses the maximum bite force measured was 19.57 N. This relatively low magnitude of bite force is discussed with respect to the ecomorphology of the feeding mechanism of S. acanthias to demonstrate the interdependence of morphology, ecology, and behavior in organismal design. Copyright 2004 Wiley-Liss, Inc.

  2. Bite Forces and Their Measurement in Dogs and Cats

    Directory of Open Access Journals (Sweden)

    Se Eun Kim

    2018-04-01

    Full Text Available Bite force is generated by the interaction of the masticatory muscles, the mandibles and maxillae, the temporomandibular joints (TMJs, and the teeth. Several methods to measure bite forces in dogs and cats have been described. Direct in vivo measurement of a bite in dogs has been done; however, bite forces were highly variable due to animal volition, situation, or specific measurement technique. Bite force has been measured in vivo from anesthetized dogs by electrical stimulation of jaw adductor muscles, but this may not be reflective of volitional bite force during natural activity. In vitro bite forces have been estimated by calculation of the force produced using mechanical equations representing the jaw adductor muscles and of the mandible and skull structure Bite force can be estimated in silico using finite element analysis (FEA of the computed model of the anatomical structures. FEA can estimate bite force in extinct species; however, estimates may be lower than the measurements in live animals and would have to be validated specifically in domestic dogs and cats to be reliable. The main factors affecting the bite forces in dogs and cats are body weight and the skull’s morphology and size. Other factors such as oral pain, TMJ disorders, masticatory muscle atrophy, and malocclusion may also affect bite force. Knowledge of bite forces in dogs and cats is essential for various clinical and research fields such as the development of implants, materials, and surgical techniques as well as for forensic medicine. This paper is a summary of current knowledge of bite forces in dogs and cats, including the effect of measurement methods and of other factors.

  3. Bite Forces and Their Measurement in Dogs and Cats.

    Science.gov (United States)

    Kim, Se Eun; Arzi, Boaz; Garcia, Tanya C; Verstraete, Frank J M

    2018-01-01

    Bite force is generated by the interaction of the masticatory muscles, the mandibles and maxillae, the temporomandibular joints (TMJs), and the teeth. Several methods to measure bite forces in dogs and cats have been described. Direct in vivo measurement of a bite in dogs has been done; however, bite forces were highly variable due to animal volition, situation, or specific measurement technique. Bite force has been measured in vivo from anesthetized dogs by electrical stimulation of jaw adductor muscles, but this may not be reflective of volitional bite force during natural activity. In vitro bite forces have been estimated by calculation of the force produced using mechanical equations representing the jaw adductor muscles and of the mandible and skull structure Bite force can be estimated in silico using finite element analysis (FEA) of the computed model of the anatomical structures. FEA can estimate bite force in extinct species; however, estimates may be lower than the measurements in live animals and would have to be validated specifically in domestic dogs and cats to be reliable. The main factors affecting the bite forces in dogs and cats are body weight and the skull's morphology and size. Other factors such as oral pain, TMJ disorders, masticatory muscle atrophy, and malocclusion may also affect bite force. Knowledge of bite forces in dogs and cats is essential for various clinical and research fields such as the development of implants, materials, and surgical techniques as well as for forensic medicine. This paper is a summary of current knowledge of bite forces in dogs and cats, including the effect of measurement methods and of other factors.

  4. Bone-breaking bite force of Basilosaurus isis (Mammalia, Cetacea from the late Eocene of Egypt estimated by finite element analysis.

    Directory of Open Access Journals (Sweden)

    Eric Snively

    Full Text Available Bite marks suggest that the late Eocence archaeocete whale Basilosaurus isis (Birket Qarun Formation, Egypt fed upon juveniles of the contemporary basilosaurid Dorudon atrox. Finite element analysis (FEA of a nearly complete adult cranium of B. isis enables estimates of its bite force and tests the animal's capabilities for crushing bone. Two loadcases reflect different biting scenarios: 1 an intitial closing phase, with all adductors active and a full condylar reaction force; and 2 a shearing phase, with the posterior temporalis active and minimized condylar force. The latter is considered probable when the jaws were nearly closed because the preserved jaws do not articulate as the molariform teeth come into occulusion. Reaction forces with all muscles active indicate that B. isis maintained relatively greater bite force anteriorly than seen in large crocodilians, and exerted a maximum bite force of at least 16,400 N at its upper P3. Under the shearing scenario with minimized condylar forces, tooth reaction forces could exceed 20,000 N despite lower magnitudes of muscle force. These bite forces at the teeth are consistent with bone indentations on Dorudon crania, reatract-and-shear hypotheses of Basilosaurus bite function, and seizure of prey by anterior teeth as proposed for other archaeocetes. The whale's bite forces match those estimated for pliosaurus when skull lengths are equalized, suggesting similar tradeoffs of bite function and hydrodynamics. Reaction forces in B. isis were lower than maxima estimated for large crocodylians and carnivorous dinosaurs. However, comparison of force estimates from FEA and regression data indicate that B. isis exerted the largest bite forces yet estimated for any mammal, and greater force than expected from its skull width. Cephalic feeding biomechanics of Basilosaurus isis are thus consistent with habitual predation.

  5. Measurement of dynamic bite force during mastication.

    Science.gov (United States)

    Shimada, A; Yamabe, Y; Torisu, T; Baad-Hansen, L; Murata, H; Svensson, P

    2012-05-01

    Efficient mastication of different types and size of food depends on fast integration of sensory information from mechanoreceptors and central control mechanisms of jaw movements and applied bite force. The neural basis underlying mastication has been studied for decades but little progress in understanding the dynamics of bite force has been made mainly due to technical limitations of bite force recorders. The aims of this study were to develop a new intraoral bite force recorder which would allow the study of natural mastication without an increase in the occlusal vertical dimension and subsequently to analyze the relation between electromyographic (EMG) activity of jaw-closing muscles, jaw movements and bite force during mastication of five different types of food. Customized force recorders based on strain gauge sensors were fitted to the upper and lower molar teeth on the preferred chewing side in fourteen healthy and dentate subjects (21-39 years), and recordings were carried out during voluntary mastication of five different kinds of food. Intraoral force recordings were successively obtained from all subjects. anova showed that impulse of bite force as well as integrated EMG was significantly influenced by food (Pmastication with direct implications for oral rehabilitation. We also propose that the control of bite force during mastication is achieved by anticipatory adjustment and encoding of bolus characteristics. © 2012 Blackwell Publishing Ltd.

  6. The relationship between oral tori and bite force.

    Science.gov (United States)

    Jeong, Chan-Woo; Kim, Kyung-Ho; Jang, Hyo-Won; Kim, Hye-Sun; Huh, Jong-Ki

    2018-01-12

    Objective The relationship between bite force and torus palatinus or mandibularis remains to be explained. The major aim of this study was to determine the correlation between bite force and oral tori. Methods The bite force of 345 patients was measured with a bite force recorder; impressions of the shape and size of the oral tori were taken on plaster models prior to orthodontic treatments. Subsequently, the relationship between oral tori and bite force was analyzed. Results The size, shape, and incidence of torus palatinus was not significantly correlated with bite force. However, the size of torus mandibularis increased significantly in proportion to the bite force (p = 0.020). The occurrence of different types of oral tori was not correlated with the bite force. Discussion The size of torus mandibularis provides information about bite force and can thus be used to clinically assess occlusal stress.

  7. Feeding biomechanics and theoretical calculations of bite force in bull sharks (Carcharhinus leucas) during ontogeny.

    Science.gov (United States)

    Habegger, Maria L; Motta, Philip J; Huber, Daniel R; Dean, Mason N

    2012-12-01

    Evaluations of bite force, either measured directly or calculated theoretically, have been used to investigate the maximum feeding performance of a wide variety of vertebrates. However, bite force studies of fishes have focused primarily on small species due to the intractable nature of large apex predators. More massive muscles can generate higher forces and many of these fishes attain immense sizes; it is unclear how much of their biting performance is driven purely by dramatic ontogenetic increases in body size versus size-specific selection for enhanced feeding performance. In this study, we investigated biting performance and feeding biomechanics of immature and mature individuals from an ontogenetic series of an apex predator, the bull shark, Carcharhinus leucas (73-285cm total length). Theoretical bite force ranged from 36 to 2128N at the most anterior bite point, and 170 to 5914N at the most posterior bite point over the ontogenetic series. Scaling patterns differed among the two age groups investigated; immature bull shark bite force scaled with positive allometry, whereas adult bite force scaled isometrically. When the bite force of C. leucas was compared to those of 12 other cartilaginous fishes, bull sharks presented the highest mass-specific bite force, greater than that of the white shark or the great hammerhead shark. A phylogenetic independent contrast analysis of anatomical and dietary variables as determinants of bite force in these 13 species indicated that the evolution of large adult bite forces in cartilaginous fishes is linked predominantly to the evolution of large body size. Multiple regressions based on mass-specific standardized contrasts suggest that the evolution of high bite forces in Chondrichthyes is further correlated with hypertrophication of the jaw adductors, increased leverage for anterior biting, and widening of the head. Lastly, we discuss the ecological significance of positive allometry in bite force as a possible

  8. Reliable quantification of bite-force performance requires use of appropriate biting substrate and standardization of bite out-lever.

    Science.gov (United States)

    Lappin, A Kristopher; Jones, Marc E H

    2014-12-15

    Bite-force performance is an ecologically important measure of whole-organism performance that shapes dietary breadth and feeding strategies and, in some taxa, determines reproductive success. It also is a metric that is crucial to testing and evaluating biomechanical models. We reviewed nearly 100 published studies of a range of taxa that incorporate direct in vivo measurements of bite force. Problematically, methods of data collection and processing vary considerably among studies. In particular, there is little consensus on the appropriate substrate to use on the biting surface of force transducers. In addition, the bite out-lever, defined as the distance from the fulcrum (i.e. jaw joint) to the position along the jawline at which the jaws engage the transducer, is rarely taken into account. We examined the effect of bite substrate and bite out-lever on bite-force estimates in a diverse sample of lizards. Results indicate that both variables have a significant impact on the accuracy of measurements. Maximum bite force is significantly greater using leather as the biting substrate compared with a metal substrate. Less-forceful bites on metal are likely due to inhibitory feedback from mechanoreceptors that prevent damage to the feeding apparatus. Standardization of bite out-lever affected which trial produced maximum performance for a given individual. Indeed, maximum bite force is usually underestimated without standardization because it is expected to be greatest at the minimum out-lever (i.e. back of the jaws), which in studies is rarely targeted with success. We assert that future studies should use a pliable substrate, such as leather, and use appropriate standardization for bite out-lever. © 2014. Published by The Company of Biologists Ltd.

  9. Effects of bruxism on the maximum bite force

    Directory of Open Access Journals (Sweden)

    Todić Jelena T.

    2017-01-01

    Full Text Available Background/Aim. Bruxism is a parafunctional activity of the masticatory system, which is characterized by clenching or grinding of teeth. The purpose of this study was to determine whether the presence of bruxism has impact on maximum bite force, with particular reference to the potential impact of gender on bite force values. Methods. This study included two groups of subjects: without and with bruxism. The presence of bruxism in the subjects was registered using a specific clinical questionnaire on bruxism and physical examination. The subjects from both groups were submitted to the procedure of measuring the maximum bite pressure and occlusal contact area using a single-sheet pressure-sensitive films (Fuji Prescale MS and HS Film. Maximal bite force was obtained by multiplying maximal bite pressure and occlusal contact area values. Results. The average values of maximal bite force were significantly higher in the subjects with bruxism compared to those without bruxism (p 0.01. Maximal bite force was significantly higher in the males compared to the females in all segments of the research. Conclusion. The presence of bruxism influences the increase in the maximum bite force as shown in this study. Gender is a significant determinant of bite force. Registration of maximum bite force can be used in diagnosing and analysing pathophysiological events during bruxism.

  10. Bite force evaluation in subjects with cleft lip and palate

    Directory of Open Access Journals (Sweden)

    Carla Renata Sipert

    2009-04-01

    Full Text Available The purpose of this study was to evaluate the masticatory function of subjects with cleft lip and palate by analyzing the bite force developed by these individuals. Bite force was evaluated in a group of 27 individuals with repaired unilateral cleft lip and palate (14 males and 13 females - aged 18-26 years and compared to the data achieved from a group of 20 noncleft subjects (10 males and 10 females - aged 18-26 years. Measurement was achieved on three positions within the dental arch (incisors, right molars and left molars, three times at each position considering the highest value for each one. Statistical analysis was performed by ANOVA and Mann-Whitney test ( α = 5%. There was a significant deficit in bite force in male individuals with cleft lip and palate compared to the male control group (p=0.02, p=0.004, p=0.003 for incisors, right and left molars, respectively. For the female group, the difference was not statistically significant (p=0.79, p=0.06, p=0.47. In the group of individuals with clefts, 92.6% were under orthodontic treatment, which could be a reason for the present findings, since it can decrease the bite force more remarkably in males than in females. In conclusion, the bite force is significantly reduced in men when comparing the cleft group to the noncleft group. In females, this reduction was not significant in the same way. However, the main reason for this reduction and for the different behavior between genders should be further investigated.

  11. Bite force measurement based on fiber Bragg grating sensor

    Science.gov (United States)

    Padma, Srivani; Umesh, Sharath; Asokan, Sundarrajan; Srinivas, Talabattula

    2017-10-01

    The maximum level of voluntary bite force, which results from the combined action of muscle of mastication, joints, and teeth, i.e., craniomandibular structure, is considered as one of the major indicators for the functional state of the masticatory system. Measurement of voluntary bite force provides useful data for the jaw muscle function and activity along with assessment of prosthetics. This study proposes an in vivo methodology for the dynamic measurement of bite force employing a fiber Bragg grating (FBG) sensor known as bite force measurement device (BFMD). The BFMD developed is a noninvasive intraoral device, which transduces the bite force exerted at the occlusal surface into strain variations on a metal plate. These strain variations are acquired by the FBG sensor bonded over it. The BFMD developed facilitates adjustment of the distance between the biting platform, which is essential to capture the maximum voluntary bite force at three different positions of teeth, namely incisor, premolar, and molar sites. The clinically relevant bite forces are measured at incisor, molar, and premolar position and have been compared against each other. Furthermore, the bite forces measured with all subjects are segregated according to gender and also compared against each other.

  12. Bite force and occlusal stress production in hominin evolution.

    Science.gov (United States)

    Eng, Carolyn M; Lieberman, Daniel E; Zink, Katherine D; Peters, Michael A

    2013-08-01

    Maximum bite force affects craniofacial morphology and an organism's ability to break down foods with different material properties. Humans are generally believed to produce low bite forces and spend less time chewing compared with other apes because advances in mechanical and thermal food processing techniques alter food material properties in such a way as to reduce overall masticatory effort. However, when hominins began regularly consuming mechanically processed or cooked diets is not known. Here, we apply a model for estimating maximum bite forces and stresses at the second molar in modern human, nonhuman primate, and hominin skulls that incorporates skeletal data along with species-specific estimates of jaw muscle architecture. The model, which reliably estimates bite forces, shows a significant relationship between second molar bite force and second molar area across species but does not confirm our hypothesis of isometry. Specimens in the genus Homo fall below the regression line describing the relationship between bite force and molar area for nonhuman anthropoids and australopiths. These results suggest that Homo species generate maximum bite forces below those predicted based on scaling among australopiths and nonhuman primates. Because this decline occurred before evidence for cooking, we hypothesize that selection for lower bite force production was likely made possible by an increased reliance on nonthermal food processing. However, given substantial variability among in vivo bite force magnitudes measured in humans, environmental effects, especially variations in food mechanical properties, may also be a factor. The results also suggest that australopiths had ape-like bite force capabilities. Copyright © 2013 Wiley Periodicals, Inc.

  13. Three-dimensional analyses of human bite-force magnitude and moment.

    Science.gov (United States)

    van Eijden, T M

    1991-01-01

    The effect of the three-dimensional orientation of occlusal force on maximal bite-force magnitude was examined in seven human subjects at three different unilateral anteroposterior bite positions (canine, second premolar and second molar). At each position, bite-force magnitude was registered in 17 precisely defined directions using a three-component force transducer and a feedback method. In addition, to assess the efficiency of transfer of muscle to bite force, for bites produced in the sagittal plane, moment-arm length was determined and the produced bite-force moment calculated. The results showed that the largest possible bite force was not always produced in a direction perpendicular to the occlusal plane. Generally, maximal bite force in medial and posterior directions was larger than that in, respectively, corresponding lateral and anterior directions. In each direction the produced force was larger at the posterior bite point than at the anterior bite point. The combined moment produced by the jaw muscles was largest for vertical bites, smallest for posteriorly directed bites and intermediate for anteriorly directed bites. In the case of vertically and anteriorly directed bites the produced moment did not vary significantly with the bite position. Hence, for these bite positions the jaw closing moment of the muscles must have kept constant. In the case of posteriorly directed bites the produced moment decreased when bite position changed from the anterior to the posterior side of the dentition. This indicated that jaw muscle activity had declined.

  14. Functional Analysis and Treatment of Nail Biting

    Science.gov (United States)

    Dufrene, Brad A.; Watson, T. Steuart; Kazmerski, Jennifer S.

    2008-01-01

    This study applied functional analysis methodology to nail biting exhibited by a 24-year-old female graduate student. Results from the brief functional analysis indicated variability in nail biting across assessment conditions. Functional analysis data were then used to guide treatment development and implementation. Treatment included a…

  15. Postural And Eye-Positional Effects On Human Biting Force: An Experimental Study

    Directory of Open Access Journals (Sweden)

    Altay Tabancacı

    2012-06-01

    Full Text Available Muscle groups affected on biting force are called temporal muscle as a major and masseter muscle as a minor. According to the human posture stability, forces of these muscles vary with the force directions. In this case, experimental investigation is strictly important such that biting force under different postural and eye- positional situations is changed. In this study, seven-male and seven-female within the age-range of 17-24 are considered corresponding to having with restorated molar tooth and without that type of tooth. With the help of specially designed biting fork, different posture- and eye-positions are investigated for experimental biting force analysis. Changes in eye-positions are not indicated significant difference for all postural positions. On one hand, it is obtained that biting force of no-filling tooth in men becomes maximum if facial muscles give full effort to biting. On the other hand, effect of facial muscles for women is not clearly noticed depending on the postural differences.

  16. The effects of biting and pulling on the forces generated during feeding in the Komodo dragon (Varanus komodoensis.

    Directory of Open Access Journals (Sweden)

    Domenic C D'Amore

    Full Text Available In addition to biting, it has been speculated that the forces resulting from pulling on food items may also contribute to feeding success in carnivorous vertebrates. We present an in vivo analysis of both bite and pulling forces in Varanus komodoensis, the Komodo dragon, to determine how they contribute to feeding behavior. Observations of cranial modeling and behavior suggest that V. komodoensis feeds using bite force supplemented by pulling in the caudal/ventrocaudal direction. We tested these observations using force gauges/transducers to measure biting and pulling forces. Maximum bite force correlates with both body mass and total body length, likely due to increased muscle mass. Individuals showed consistent behaviors when biting, including the typical medial-caudal head rotation. Pull force correlates best with total body length, longer limbs and larger postcranial motions. None of these forces correlated well with head dimensions. When pulling, V. komodoensis use neck and limb movements that are associated with increased caudal and ventral oriented force. Measured bite force in Varanus komodoensis is similar to several previous estimations based on 3D models, but is low for its body mass relative to other vertebrates. Pull force, especially in the ventrocaudal direction, would allow individuals to hunt and deflesh with high success without the need of strong jaw adductors. In future studies, pull forces need to be considered for a complete understanding of vertebrate carnivore feeding dynamics.

  17. The effects of biting and pulling on the forces generated during feeding in the Komodo dragon (Varanus komodoensis).

    Science.gov (United States)

    D'Amore, Domenic C; Moreno, Karen; McHenry, Colin R; Wroe, Stephen

    2011-01-01

    In addition to biting, it has been speculated that the forces resulting from pulling on food items may also contribute to feeding success in carnivorous vertebrates. We present an in vivo analysis of both bite and pulling forces in Varanus komodoensis, the Komodo dragon, to determine how they contribute to feeding behavior. Observations of cranial modeling and behavior suggest that V. komodoensis feeds using bite force supplemented by pulling in the caudal/ventrocaudal direction. We tested these observations using force gauges/transducers to measure biting and pulling forces. Maximum bite force correlates with both body mass and total body length, likely due to increased muscle mass. Individuals showed consistent behaviors when biting, including the typical medial-caudal head rotation. Pull force correlates best with total body length, longer limbs and larger postcranial motions. None of these forces correlated well with head dimensions. When pulling, V. komodoensis use neck and limb movements that are associated with increased caudal and ventral oriented force. Measured bite force in Varanus komodoensis is similar to several previous estimations based on 3D models, but is low for its body mass relative to other vertebrates. Pull force, especially in the ventrocaudal direction, would allow individuals to hunt and deflesh with high success without the need of strong jaw adductors. In future studies, pull forces need to be considered for a complete understanding of vertebrate carnivore feeding dynamics.

  18. Chewing side, bite force symmetry, and occlusal contact area of subjects with different facial vertical patterns

    Directory of Open Access Journals (Sweden)

    Simone Guimarães Farias Gomes

    2011-10-01

    Full Text Available Craniofacial dimensions influence oral functions; however, it is not known whether they are associated with function asymmetry. The objective of this study was to evaluate chewing side preference and lateral asymmetry of occlusal contact area and bite force of individuals with different craniofacial patterns. Seventy-eight dentate subjects were divided into 3 groups according to the VERT index as follows: (1 mesofacial, (2 brachyfacial and (3 dolichofacial. Chewing side preference was evaluated using jaw tracking equipment, occlusal contact area was measured by silicon registration of posterior teeth, and bite force was measured unilaterally on molar regions using 2.25 mm-thick sensors. Statistical analysis was performed using ANOVA on Ranks, Student's t-test, and Mann-Whitney tests at a 5% significance level. Mesofacial, brachyfacial, and dolichofacial subjects presented more occlusal contact area on the left side. Only dolichofacial subjects showed lateral asymmetry for bite force, presenting higher force on the left side. No statistically significant differences were found for chewing side preference among all groups. Within the limitations of this study, it can be concluded that craniofacial dimensions play a role in asymmetry of bite force. ClinicalTrials.gov ID: NCT01286363.

  19. Clinical significance of isometric bite force versus electrical activity in temporal and masseter muscles

    DEFF Research Database (Denmark)

    Bakke, Merete; Michler, L; Han, K

    1989-01-01

    significant with respect to unilateral, but not to bilateral force measurements. Only in the masseter muscle was strength of dynamic contractions during chewing significantly correlated to bite force. With the present method it was demonstrated that unilateral bite force is a simple clinical indicator...

  20. The correlation between surface electromyography and bite force of mastication muscles in Asian young adults.

    Science.gov (United States)

    Yen, Cheng-I; Mao, Shih-Hsuan; Chen, Chih-Hao; Chen, Chien-Tzung; Lee, Ming-Yih

    2015-05-01

    Mastication function is related to mandible movement, muscle strength, and bite force. No standard device for measuring bite force has been developed. A linear relationship between electromyographic activity and bite force has been reported by several investigators, but data on the reliability of this relationship remain limited in Asian young adults. The purpose of this study was to develop a clinically applicable, reliable, quantitative, and noninvasive system to measure the kinetic mastication function and observe the correlation between surface electromyography (sEMG) and bite force. The study group consisted of 41 young healthy adults (24 men and 17 women). Surface electromyography was used to evaluate bilateral temporalis and masseter muscle activities, and an occlusal bite force system was used concurrently to measure the bite force during maximal voluntary biting. Bilateral symmetry was compared, and the correlation between EMG and bite force was calculated. The sEMG signals were 107.7±55.0 μV and 106.0±56.0 μV (P=0.699) on right and left temporalis muscles and 183.7±86.2 μV and 194.8±94.3 μV (P=0.121) on right and left masseter muscles, respectively. The bite force was 5.0±3.2 kg on the right side and 5.7±4.0 kg on the left side (P=0.974). A positive correlation between sEMG and bite force was observed. The correlation coefficient between the temporalis muscle and bite force was 0.512, and that between the masseter muscle and bite force was 0.360. No significant difference between the bilateral electromyographic activities of the temporalis and masseter muscles and bilateral bite force was observed in young healthy adults in Taiwan. A positive correlation between sEMG signals and bite force was noted. By combining sEMG and bite force, we developed a clinically applicable, quantitative, reliable, and noninvasive system for evaluating mastication function by using characteristics of biofeedback.

  1. Effects of strong bite force on the facial vertical dimension of pembarong performers

    Directory of Open Access Journals (Sweden)

    C. Christina

    2017-06-01

    Full Text Available Background: A pembarong performer is a reog dancer who bites on a piece of wood inserted into his/her mouth in order to support a 60 kg Barongan or Dadak Merak mask. The teeth supporting this large and heavy mask are directly affected, as the strong bite force exerted during a dance could affect their vertical and sagital facial dimensions. Purpose: This study aimed to examine the influence of the bite force of pembarong performers due to their vertical and sagital facial dimensions. Methods: The study reported here involved fifteen pembarong performers and thirteen individuals with normal occlusion (with specific criteria. The bite force of these subjects was measured with a dental prescale sensor during its centric occlusion. A cephalometric variation measurement was subsequently performed on all subjects with its effects on their vertical and sagital facial dimensions being measured. Results: The bite force value of the pembarong performers was 394.3816 ± 7.68787 Newtons, while the normal occlusion was 371.7784 ± 4.77791 Newtons. There was no correlation between the bite force and the facial sagital dimension of these subjects. However, a significant correlation did exist between bite force and lower facial height/total facial height (LFH/TFH ratio (p = 0.013. Conversely, no significant correlation between bite force and posterior facial height/total facial height (PFH/TFH ratio (p = 0.785 was detected. There was an inverse correlation between bite force and LFH/TFH ratio (r = -.464. Conclusion: Bite force is directly related to the decrease in LFH/TFH ratio. Occlusal pressure exerted by the posterior teeth on the alveolar bone may increase bone density at the endosteal surface of cortical bone.

  2. The relationship between skull morphology, masticatory muscle force and cranial skeletal deformation during biting.

    Science.gov (United States)

    Toro-Ibacache, Viviana; Zapata Muñoz, Víctor; O'Higgins, Paul

    2016-01-01

    The human skull is gracile when compared to many Middle Pleistocene hominins. It has been argued that it is less able to generate and withstand high masticatory forces, and that the morphology of the lower portion of the modern human face correlates most strongly with dietary characteristics. This study uses geometric morphometrics and finite element analysis (FEA) to assess the relationship between skull morphology, muscle force and cranial deformations arising from biting, which is relevant in understanding how skull morphology relates to mastication. The three-dimensional skull anatomies of 20 individuals were reconstructed from medical computed tomograms. Maximal contractile muscle forces were estimated from muscular anatomical cross-sectional areas (CSAs). Fifty-nine landmarks were used to represent skull morphology. A partial least squares analysis was performed to assess the association between skull shape and muscle force, and FEA was used to compare the deformation (strains) generated during incisor and molar bites in two individuals representing extremes of morphological variation in the sample. The results showed that only the proportion of total muscle CSA accounted for by the temporalis appears associated with skull morphology, albeit weekly. However, individuals with a large temporalis tend to possess a relatively wider face, a narrower, more vertically oriented maxilla and a lower positioning of the coronoid process. The FEAs showed that, despite differences in morphology, biting results in similar modes of deformation for both crania, but with localised lower magnitudes of strains arising in the individual with the narrowest, most vertically oriented maxilla. Our results suggest that the morphology of the maxilla modulates the transmission of forces generated during mastication to the rest of the cranium by deforming less in individuals with the ability to generate proportionately larger temporalis muscle forces. Copyright © 2015 Elsevier GmbH. All

  3. Influence of maximum bite force on jaw movement during gummy jelly mastication.

    Science.gov (United States)

    Kuninori, T; Tomonari, H; Uehara, S; Kitashima, F; Yagi, T; Miyawaki, S

    2014-05-01

    It is known that maximum bite force has various influences on chewing function; however, there have not been studies in which the relationships between maximum bite force and masticatory jaw movement have been clarified. The aim of this study was to investigate the effect of maximum bite force on masticatory jaw movement in subjects with normal occlusion. Thirty young adults (22 men and 8 women; mean age, 22.6 years) with good occlusion were divided into two groups based on whether they had a relatively high or low maximum bite force according to the median. The maximum bite force was determined according to the Dental Prescale System using pressure-sensitive sheets. Jaw movement during mastication of hard gummy jelly (each 5.5 g) on the preferred chewing side was recorded using a six degrees of freedom jaw movement recording system. The motion of the lower incisal point of the mandible was computed, and the mean values of 10 cycles (cycles 2-11) were calculated. A masticatory performance test was conducted using gummy jelly. Subjects with a lower maximum bite force showed increased maximum lateral amplitude, closing distance, width and closing angle; wider masticatory jaw movement; and significantly lower masticatory performance. However, no differences in the maximum vertical or maximum anteroposterior amplitudes were observed between the groups. Although other factors, such as individual morphology, may influence masticatory jaw movement, our results suggest that subjects with a lower maximum bite force show increased lateral jaw motion during mastication. © 2014 John Wiley & Sons Ltd.

  4. Teeth grinding, oral motor performance and maximal bite force in cerebral palsy children.

    Science.gov (United States)

    Botti Rodrigues Santos, Maria Teresa; Duarte Ferreira, Maria Cristina; de Oliveira Guaré, Renata; Guimarães, Antonio Sergio; Lira Ortega, Adriana

    2015-01-01

    Identify whether the degree of oral motor performance is related to the presence of teeth grinding and maximal bite force values in children with spastic cerebral palsy. Ninety-five spastic cerebral palsy children with and without teeth grinding, according to caregivers' reports, were submitted to a comprehensive oral motor performance evaluation during the feeding process using the Oral Motor Assessment Scale. Maximal bite force was measured using an electronic gnathodynamometer. The teeth grinding group (n = 42) was younger, used anticonvulsant drugs, and was more frequently classified within the subfunctional oral motor performance category. Teeth grinding subfunctional spastic cerebral palsy children presented lower values of maximal bite force. The functional groups showing the presence or absence of teeth grinding presented higher values of maximal bite force compared with the subfunctional groups. In spastic cerebral palsy children, teeth grinding is associated with the worse oral motor performance. © 2015 Special Care Dentistry Association and Wiley Periodicals, Inc.

  5. Fast and Powerful: Biomechanics and Bite Forces of the Mandibles in the American Cockroach Periplaneta americana.

    Directory of Open Access Journals (Sweden)

    Tom Weihmann

    Full Text Available Knowing the functionality and capabilities of masticatory apparatuses is essential for the ecological classification of jawed organisms. Nevertheless insects, especially with their outstanding high species number providing an overwhelming morphological diversity, are notoriously underexplored with respect to maximum bite forces and their dependency on the mandible opening angles. Aiming for a general understanding of insect biting, we examined the generalist feeding cockroach Periplaneta americana, characterized by its primitive chewing mouth parts. We measured active isometric bite forces and passive forces caused by joint resistance over the entire mandibular range with a custom-built 2D force transducer. The opening angle of the mandibles was quantified by using a video system. With respect to the effective mechanical advantage of the mandibles and the cross-section areas, we calculated the forces exerted by the mandible closer muscles and the corresponding muscle stress values. Comparisons with the scarce data available revealed close similarities of the cockroaches' mandible closer stress values (58 N/cm2 to that of smaller specialist carnivorous ground beetles, but strikingly higher values than in larger stag beetles. In contrast to available datasets our results imply the activity of faster and slower muscle fibres, with the latter becoming active only when the animals chew on tough material which requires repetitive, hard biting. Under such circumstances the coactivity of fast and slow fibres provides a force boost which is not available during short-term activities, since long latencies prevent a specific effective employment of the slow fibres in this case.

  6. Relationship between oral status and maximum bite force in preschool children

    Directory of Open Access Journals (Sweden)

    Ching-Ming Su

    2009-03-01

    Conclusion: By combining the results of this study, it was concluded that associations of bite force with factors like age, maximum mouth opening and the number of teeth in contact were clearer than for other variables such as body height, body weight, occlusal pattern, and tooth decay or fillings.

  7. A preliminary study to find out maximum occlusal bite force in Indian individuals

    DEFF Research Database (Denmark)

    Jain, Veena; Mathur, Vijay Prakash; Pillai, Rajath

    2014-01-01

    PURPOSE: This preliminary hospital based study was designed to measure the mean maximum bite force (MMBF) in healthy Indian individuals. An attempt was made to correlate MMBF with body mass index (BMI) and some of the anthropometric features. METHODOLOGY: A total of 358 healthy subjects in the ag...

  8. Risk factors for low molar bite force in adult orthodontic patients

    DEFF Research Database (Denmark)

    Andersen, Malene Krogh; Sonnesen, Ane Liselotte

    2013-01-01

    in intercuspidal position, and symptoms and signs of temporomandibular disorders (TMD) were evaluated by TMD screening. Associations were assessed by Spearman correlations, Wilcoxon signed-rank sum test, and multiple stepwise regression analyses. Associations were found between bite force and craniofacial...

  9. Differences in bite force between dolichofacial and brachyfacial individuals: Side of mastication, gender, weight and height.

    Science.gov (United States)

    Quiudini, Paulo Roberto; Pozza, Daniel Humberto; Pinto, Ary Dos Santos; de Arruda, Mauricio Ferraz; Guimarães, Antonio Sergio

    2017-07-01

    Due to the bite force importance in functionality of the masticatory system, this study aimed to characterize it in dolichofacial and brachyfacial individuals. A sample comprised by 190 patients was divided into two groups: 90 severe dolichofacial, and 100 severe brachyfacial individuals classified according to the VERT index and the face height ratio (Jarabak quotient). Bite force was measured by using an adjusted digital dynamometer and proper methodology. The sample met the parametric assumptions and presented statistical significance when right and left sides of dolichofacial and brachyfacial individuals were compared. However, within the same group, no differences between the left and right sides were found. Generally, bite force was higher for male, left masticator, age between 41-50 years, weighing over 100kg and between 1.81 and 1.90m tall. Based on the results of this cross-sectional study, it was possible to conclude that the bite force in severe brachyfacial individuals was significantly higher than in severe dolichofacial individuals, being influenced by gender, weight and height. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  10. Biting Force and Muscle Activity in Implant-Supported Single Mandibular Overdentures Opposing Fixed Maxillary Dentition.

    Science.gov (United States)

    Al-Magaleh, Wafaʼa R; Abbas, Nadia A; Amer, Ashraf A; Abdelkader, Ann A; Bahgat, Basma

    2016-04-01

    This study aimed to investigate the relation between biting force and masticatory muscle activity in patients treated by 3 modalities of single mandibular dentures. Forty implants were placed in 10 patients with completely edentulous mandibles. The study was divided into 3 treatment stages. Initially, each patient received a conventional mandibular complete denture. At the second stage, 4 mandibular implants were placed and the denture was refitted to their abutments. Third stage comprised connecting the denture to the implants through ball attachments. During each treatment stage, maximum biting force and muscle activity were measured during maximum clenching and chewing of soft and hard food. Biting force demonstrated a statistically significant increase by time for the 3 treatment stages. The highest muscle activity was recorded for the conventional denture followed by the implant-supported overdenture without attachment, whereas the lowest values were recorded for the implant-supported overdenture with attachment. Biting force was related mainly to the quality of denture support. Muscle activity was higher in patients with conventional denture than with implant-supported prostheses (with or without attachments).

  11. Facial dimensions, bite force and masticatory muscle thickness in preschool children with functional posterior crossbite

    Directory of Open Access Journals (Sweden)

    Paula Midori Castelo

    2008-03-01

    Full Text Available Posterior crossbite may affect craniofacial growth and development. Thus, this study aimed to associate facial dimensions (by standardized frontal photographs to masseter and anterior portion of the temporal muscle thickness (by ultrasonography and maximal bilateral bite force in 49 children with deciduous and early mixed dentitions. They were distributed in four groups: deciduous-normal occlusion (DNO, n = 15, deciduous-crossbite (DCB, n = 10, mixed-normal occlusion (MNO, n = 13 and mixed-crossbite (MCB, n = 11. Anterior facial height (AFH, bizygomatic width (FWB, and intergonial width (FWI were determined and associated with muscle thickness and bite force, applying Pearson’s coefficients and multiple logistic regression, with age, gender, body weight and height as the covariates. FWB and FWI were correlated positively with the masseter thickness, whereas AFH/FWB and AFH/FWI ratios had negative correlation, except in the DNO group. The correlation between AFH/FWB and bite force in the MCB group was significantly negative. A higher AFH/FWB in MNO and MCB led to a significantly higher probability for functional crossbite development. In the studied sample, it was observed that children in the early mixed dentition with a long-face trend showed lower bite force and higher probability to present functional posterior crossbite, without significant influence of the covariates.

  12. Does pain in the masseter and anterior temporal muscles influence maximal bite force?

    Science.gov (United States)

    Goiato, Marcelo Coelho; Zuim, Paulo Renato Junqueira; Moreno, Amália; Dos Santos, Daniela Micheline; da Silva, Emily Vivianne Freitas; de Caxias, Fernanda Pereira; Turcio, Karina Helga Leal

    2017-11-01

    The aim of this study was to evaluate changes in pain and muscle force, and the relationship between them, in patients with muscle pain and bruxism, prior to and after treatment. Thirty women with bruxism and myofascial pain (Ia) were included in this study. Sleep bruxism diagnosis was made based on clinical diagnostic criteria, and awake bruxism diagnosis was made by patient questionnaires and the presence of tooth wear. The diagnosis of myofascial pain was established according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD). Dentulous or partially edentulous patients (rehabilitated with conventional fixed prostheses) were included in the study according to the inclusion and exclusion criteria. The pain treatment protocol included occlusal splints, patient education, and physiotherapy for 30days. Bite force was measured using a dynamometer at the central incisor and the first molar regions on both sides. The exams were performed at baseline, after 7days, and 30days after treatment. The Wilcoxon test was used to compare patient pain level response among the periods analyzed in the study. Bite force data were submitted to two-way repeated-measures ANOVA, followed by the Tukey HSD test (pforce. Results revealed that there was a statistical difference in pain level over time for both muscles and sides (pforce exhibited significantly higher values after 30days of treatment, when compared with the baseline (pforce only for the temporal muscle in all periods analyzed (pforce. Pain level decreased and bite force increased in the molar region after treatment. No strong correlation or dispersion in the relationship between pain levels and bite force was seen in women with myofascial pain and bruxism. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Novel System for Bite-Force Sensing and Monitoring Based on Magnetic Near Field Communication

    Directory of Open Access Journals (Sweden)

    Jesús Sanz Maudes

    2012-08-01

    Full Text Available Intraoral devices for bite-force sensing have several applications in odontology and maxillofacial surgery, as bite-force measurements provide additional information to help understand the characteristics of bruxism disorders and can also be of help for the evaluation of post-surgical evolution and for comparison of alternative treatments. A new system for measuring human bite forces is proposed in this work. This system has future applications for the monitoring of bruxism events and as a complement for its conventional diagnosis. Bruxism is a pathology consisting of grinding or tight clenching of the upper and lower teeth, which leads to several problems such as lesions to the teeth, headaches, orofacial pain and important disorders of the temporomandibular joint. The prototype uses a magnetic field communication scheme similar to low-frequency radio frequency identification (RFID technology (NFC. The reader generates a low-frequency magnetic field that is used as the information carrier and powers the sensor. The system is notable because it uses an intra-mouth passive sensor and an external interrogator, which remotely records and processes information regarding a patient’s dental activity. This permits a quantitative assessment of bite-force, without requiring intra-mouth batteries, and can provide supplementary information to polysomnographic recordings, current most adequate early diagnostic method, so as to initiate corrective actions before irreversible dental wear appears. In addition to describing the system’s operational principles and the manufacture of personalized prototypes, this report will also demonstrate the feasibility of the system and results from the first in vitro and in vivo trials.

  14. Cause, setting and ownership analysis of dog bites in Bay County, Florida from 2009 to 2010.

    Science.gov (United States)

    Matthias, J; Templin, M; Jordan, M M; Stanek, D

    2015-02-01

    Emergency room and hospital discharge data have been used to describe the risk factors and public health impact of dog bites. These data sets are based on financial charges for severe bites and underestimates dog bite burdens within communities. This study expands both the source of information and risk factor data collected to provide demographic analysis of dog bite injury risk factors reported in Bay County, Florida in 2009-2010. Extended data for dog bites reported by various sources from January 1, 2009 to December 31, 2010 were collected by Florida Department of Health in Bay County. Data collected included bite victim's age and gender, primary reported cause of bite, setting, dog's restraint status and relationship between the victim and the dog. A total of 799 bites were reported. Most bites (55%) were reported first by healthcare practitioners, particularly bites involving childrenmanagement was the most common cause of bites (26%), followed by protective behaviour (24%). Bites of unknown cause were 2.5 times more likely in childrenrisks by age group or gender provides an opportunity to implement targeted interventions to prevent dog bites. © 2014 Blackwell Verlag GmbH.

  15. Morphometry, bite-force, and paleobiology of the late miocene caiman Purussaurus brasiliensis.

    Directory of Open Access Journals (Sweden)

    Tito Aureliano

    Full Text Available Purussaurus brasiliensis thrived in the northwestern portion of South America during the Late Miocene. Although substantial material has been recovered since its early discovery, this fossil crocodilian can still be considered as very poorly understood. In the present work, we used regression equations based on modern crocodilians to present novel details about the morphometry, bite-force and paleobiology of this species. According to our results, an adult Purussaurus brasiliensis was estimated to reach around 12.5 m in length, weighing around 8.4 metric tons, with a mean daily food intake of 40.6 kg. It was capable of generating sustained bite forces of 69,000 N (around 7 metric tons-force. The extreme size and strength reached by this animal seems to have allowed it to include a wide range of prey in its diet, making it a top predator in its ecosystem. As an adult, it would have preyed upon large to very large vertebrates, and, being unmatched by any other carnivore, it avoided competition. The evolution of a large body size granted P. brasiliensis many advantages, but it may also have led to its vulnerability. The constantly changing environment on a large geological scale may have reduced its long-term survival, favoring smaller species more resilient to ecological shifts.

  16. Morphometry, Bite-Force, and Paleobiology of the Late Miocene Caiman Purussaurus brasiliensis

    Science.gov (United States)

    Aureliano, Tito; Ghilardi, Aline M.; Guilherme, Edson; Souza-Filho, Jonas P.; Cavalcanti, Mauro; Riff, Douglas

    2015-01-01

    Purussaurus brasiliensis thrived in the northwestern portion of South America during the Late Miocene. Although substantial material has been recovered since its early discovery, this fossil crocodilian can still be considered as very poorly understood. In the present work, we used regression equations based on modern crocodilians to present novel details about the morphometry, bite-force and paleobiology of this species. According to our results, an adult Purussaurus brasiliensis was estimated to reach around 12.5 m in length, weighing around 8.4 metric tons, with a mean daily food intake of 40.6 kg. It was capable of generating sustained bite forces of 69,000 N (around 7 metric tons-force). The extreme size and strength reached by this animal seems to have allowed it to include a wide range of prey in its diet, making it a top predator in its ecosystem. As an adult, it would have preyed upon large to very large vertebrates, and, being unmatched by any other carnivore, it avoided competition. The evolution of a large body size granted P. brasiliensis many advantages, but it may also have led to its vulnerability. The constantly changing environment on a large geological scale may have reduced its long-term survival, favoring smaller species more resilient to ecological shifts. PMID:25689140

  17. Bite marks on skin and clay: A comparative analysis

    Directory of Open Access Journals (Sweden)

    R.K. Gorea

    2014-12-01

    Full Text Available Bite marks are always unique because teeth are distinctive. Bite marks are often observed at the crime scene in sexual and in physical assault cases on the skin of the victims and sometimes on edible leftovers in burglary cases. This piece of evidence is often ignored, but if properly harvested and investigated, bite marks may prove useful in apprehending and successfully prosecuting the criminals. Due to the importance of bite marks, we conducted a progressive randomised experimental study conducted on volunteers. A total of 188 bite marks on clay were studied. Based on these findings, 93.34% of the volunteers could be identified from the bite marks on the clay. In addition, 201 impressions on skin were studied, and out of these cases, 41.01% of the same volunteers could be identified based on the bite mark impressions on the skin.

  18. Mandibular kinematics and maximum voluntary bite force following segmental resection of the mandible without or with reconstruction.

    Science.gov (United States)

    Linsen, Sabine S; Oikonomou, Annina; Martini, Markus; Teschke, Marcus

    2018-05-01

    The purpose was to analyze mandibular kinematics and maximum voluntary bite force in patients following segmental resection of the mandible without and with reconstruction (autologous bone, alloplastic total temporomandibular joint replacement (TMJ TJR)). Subjects operated from April 2002 to August 2014 were enrolled in the study. Condylar (CRoM) and incisal (InRoM) range of motion and deflection during opening, condylar retrusion, incisal lateral excursion, mandibular rotation angle during opening, and maximum voluntary bite force were determined on the non-affected site and compared between groups. Influence of co-factors (defect size, soft tissue deficit, neck dissection, radiotherapy, occlusal contact zones (OCZ), and time) was determined. Twelve non-reconstructed and 26 reconstructed patients (13 autologous, 13 TMJ TJR) were included in the study. InRoM opening and bite force were significantly higher (P ≤ .024), and both condylar and incisal deflection during opening significantly lower (P ≤ .027) in reconstructed patients compared with non-reconstructed. Differences between the autologous and the TMJ TJR group were statistically not significant. Co-factors defect size, soft tissue deficit, and neck dissection had the greatest impact on kinematics and number of OCZs on bite force. Reconstructed patients (both autologous and TMJ TJR) have better overall function than non-reconstructed patients. Reconstruction of segmental mandibular resection has positive effects on mandibular function. TMJ TJR seems to be a suitable technique for the reconstruction of mandibular defects including the TMJ complex.

  19. Occlusal bite force change after orthodontic treatment with Andresen functional appliance.

    Science.gov (United States)

    Al-Khateeb, Susan N; Abu Alhaija, Elham S; Majzoub, Sami

    2015-04-01

    The aim of this study was to determine the occlusal bite force (OBF) changes, at the incisal and molar regions, after orthodontic treatment with functional appliance therapy in preadolescent subjects. OBF was measured for patients (17 females and 16 males) before and after the treatment with Andresen functional appliance for an average period of 9 months (mean age was 11.8±1.1 years). Three variables were registered; maximum OBF at molar region and the average of three readings at the molar (AOBF) and incisal regions (IOBF). The same variables were measured in two occasions for a matching non-treated control group with a period of 9 months between the two measurements. No significant changes were seen in the OBF measured parameters in the control group. There was a reduction in all measured parameters. The mean reduction in maximum OBF was 76.1±12.4 N (P appliance caused a significant reduction in OBF immediately after treatment. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  20. Class II young adult treatment with Twin Force Bite corrector: 10-year follow-up

    Directory of Open Access Journals (Sweden)

    Ozge Uslu-Akcam

    2017-01-01

    Full Text Available One of the most preferred compliance free fixed functional appliances in nongrowing patients is Twin Force Bite corrector (TFBC. The aim of this case report is to evaluate the effectiveness of TFBC in the treatment of an adult Class II case. A 16-year 1-month-old boy having skeletal and dental Class II relationship was selected. Roth 0.018 × 0.025 inch slots brackets were attached; a fixed lingual arch in the mandibular dental arch and a Nance appliance in the maxillary dental arch were used to increase anchorage. The TFBC therapy used for sagittal activation and stimulation of forward mandibular growth lasted for 3 months. The post-TFBC treatment lasted 6 months and the total treatment time was 9 months. Treatment of a young adult Class II malocclusion with TFBC resulted in a Class I molar occlusion, an ideal overjet, overbite, and incisor angulation in a short time and maintained in the 10-year follow-up.

  1. Intraoral conversion of occlusal force to electricity and magnetism by biting of piezoelectric elements.

    Science.gov (United States)

    Kameda, Takashi; Ohkuma, Kazuo; Sano, Natsuki; Ogura, Hideo; Terada, Kazuto

    2012-01-01

    Very weak electrical, magnetic and ultrasound signal stimulations are known to promote the formation, metabolism, restoration and stability of bone and surrounding tissues after treatment and operations. We have therefore investigated the possibility of intraoral generation of electricity and magnetism by occlusal force in an in vitro study. Biting bimorph piezoelectric elements with lead zirconate titanate (PZT) using dental models generated appropriate magnetism for bone formation, i. e. 0.5-0.6 gauss, and lower electric currents and higher voltages, i. e. 2.0-6.0 μA at 10-22 V (appropriate levels are 30 μA and 1.25 V), as observed by a universal testing machine. The electric currents and voltages could be changed using amplifier circuits. These results show that intraoral generation of electricity and magnetism is possible and could provide post-operative stabilization and activation of treated areas of bone and the surrounding tissues directly and/or indirectly by electrical, magnetic and ultrasound stimulation, which could accelerate healing.

  2. Effects of gape and tooth position on bite force and skull stress in the dingo (Canis lupus dingo using a 3-dimensional finite element approach.

    Directory of Open Access Journals (Sweden)

    Jason Bourke

    Full Text Available Models of the mammalian jaw have predicted that bite force is intimately linked to jaw gape and to tooth position. Despite widespread use, few empirical studies have provided evidence to validate these models in non-human mammals and none have considered the influence of gape angle on the distribution of stress. Here using a multi-property finite element (FE model of Canis lupus dingo, we examined the influence of gape angle and bite point on both bite force and cranial stress. Bite force data in relation to jaw gape and along the tooth row, are in broad agreement with previously reported results. However stress data showed that the skull of C. l. dingo is mechanically suited to withstand stresses at wide gapes; a result that agreed well with previously held views regarding carnivoran evolution. Stress data, combined with bite force information, suggested that there is an optimal bite angle of between 25 degrees and 35 degrees in C. l. dingo. The function of these rather small bite angles remains unclear.

  3. Microbial analysis of bite marks by sequence comparison of streptococcal DNA.

    Directory of Open Access Journals (Sweden)

    Darnell M Kennedy

    Full Text Available Bite mark injuries often feature in violent crimes. Conventional morphometric methods for the forensic analysis of bite marks involve elements of subjective interpretation that threaten the credibility of this field. Human DNA recovered from bite marks has the highest evidentiary value, however recovery can be compromised by salivary components. This study assessed the feasibility of matching bacterial DNA sequences amplified from experimental bite marks to those obtained from the teeth responsible, with the aim of evaluating the capability of three genomic regions of streptococcal DNA to discriminate between participant samples. Bite mark and teeth swabs were collected from 16 participants. Bacterial DNA was extracted to provide the template for PCR primers specific for streptococcal 16S ribosomal RNA (16S rRNA gene, 16S-23S intergenic spacer (ITS and RNA polymerase beta subunit (rpoB. High throughput sequencing (GS FLX 454, followed by stringent quality filtering, generated reads from bite marks for comparison to those generated from teeth samples. For all three regions, the greatest overlaps of identical reads were between bite mark samples and the corresponding teeth samples. The average proportions of reads identical between bite mark and corresponding teeth samples were 0.31, 0.41 and 0.31, and for non-corresponding samples were 0.11, 0.20 and 0.016, for 16S rRNA, ITS and rpoB, respectively. The probabilities of correctly distinguishing matching and non-matching teeth samples were 0.92 for ITS, 0.99 for 16S rRNA and 1.0 for rpoB. These findings strongly support the tenet that bacterial DNA amplified from bite marks and teeth can provide corroborating information in the identification of assailants.

  4. Two-year follow-up of changes in bite force and occlusal contact area after intraoral vertical ramus osteotomy with and without Le Fort I osteotomy.

    Science.gov (United States)

    Choi, Y J; Lim, H; Chung, C J; Park, K H; Kim, K H

    2014-06-01

    This study was performed to examine the longitudinal changes in bite force and occlusal contact area after mandibular setback surgery via intraoral vertical ramus osteotomy (IVRO). Patients with mandibular prognathism who underwent IVRO (surgical group: 39 men and 39 women) were compared with subjects with class I skeletal and dental relationships (control group; 32 men and 35 women). The surgical group was divided into two subgroups: 1-jaw surgery (n = 30) and 2-jaw surgery (n = 48). Bite force and contact area were measured in maximum intercuspation with the Dental Prescale System before treatment, within 1 month before surgery, and at 1, 3, 6, 9, 12, and 24 months postsurgery. A linear mixed model was used to investigate the time-dependent changes and associated factors. Bite force and contact area decreased during presurgical orthodontic treatment, were minimal at 1 month postsurgery, and increased gradually thereafter. The 1-jaw and 2-jaw subgroups showed no significant differences in bite force. The time-dependent changes in bite force were significantly different according to the contact area (P contact area gradually increase throughout the postsurgical evaluation period. Increasing the occlusal contact area may be essential for improving bite force after surgery. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  5. Chewing efficiency and maximum bite force with different attachment systems of implant overdentures: a crossover study.

    Science.gov (United States)

    Elsyad, Moustafa Abdou; Khairallah, Ahmed Samir

    2017-06-01

    This crossover study aimed to evaluate and compare chewing efficiency and maximum bite force (MBF) with resilient telescopic and bar attachment systems of implant overdentures in patients with atrophied mandibles. Ten participants with severely resorbed mandibles and persistent denture problems received new maxillary and mandibular conventional dentures (control, CD). After 3 months of adaptation, two implants were inserted in canine region of the mandible. In a quasi-random method, overdentures were connected to the implants with either bar overdentures (BOD) or resilient telescopic overdentures (TOD) attachment systems. Chewing efficiency in terms of unmixed fraction (UF) was measured using chewing gum (after 5, 10, 20, 30 and 50 strokes), and MBF was measured using a bite force transducer. Measurements were performed 3 months after using each of the following prostheses: CD, BOD and TOD. Chewing efficiency and MBF increased significantly with BOD and TOD compared to CD. As the number of chewing cycles increased, the UF decreased. TOD recorded significant higher chewing efficiency and MBF than BOD. Resilient telescopic attachments are associated with increased chewing efficiency and MBF compared bar attachments when used to retain overdentures to the implants in patients with atrophied mandibles. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Loss of Axon Bifurcation in Mesencephalic Trigeminal Neurons Impairs the Maximal Biting Force in Npr2-Deficient Mice

    Directory of Open Access Journals (Sweden)

    Gohar Ter-Avetisyan

    2018-06-01

    Full Text Available Bifurcation of axons from dorsal root ganglion (DRG and cranial sensory ganglion (CSG neurons is mediated by a cGMP-dependent signaling pathway composed of the ligand C-type natriuretic peptide (CNP, the receptor guanylyl cyclase Npr2 and the cGMP-dependent protein kinase I (cGKI. Here, we demonstrate that mesencephalic trigeminal neurons (MTN which are the only somatosensory neurons whose cell bodies are located within the CNS co-express Npr2 and cGKI. Afferents of MTNs form Y-shaped branches in rhombomere 2 where the ligand CNP is expressed. Analyzing mouse mutants deficient for CNP or Npr2 we found that in the absence of CNP-induced cGMP signaling MTN afferents no longer bifurcate and instead extend either into the trigeminal root or caudally in the hindbrain. Since MTNs provide sensory information from jaw closing muscles and periodontal ligaments we measured the bite force of conditional mouse mutants of Npr2 (Npr2flox/flox;Engr1Cre that lack bifurcation of MTN whereas the bifurcation of trigeminal afferents is normal. Our study revealed that the maximal biting force of both sexes is reduced in Npr2flox/flox;Engr1Cre mice as compared to their Npr2flox/flox littermate controls. In conclusion sensory feedback mechanisms from jaw closing muscles or periodontal ligaments might be impaired in the absence of MTN axon bifurcation.

  7. Forças de mordida relacionadas a próteses parciais removíveis inferiores Biting forces related to partially removable mandibular dentures

    Directory of Open Access Journals (Sweden)

    Eduardo Piza PELLIZZER

    1998-10-01

    Full Text Available A pesquisa teve como objetivo determinar as forças de mordida de 73 indivíduos, por meio de um gnatodinamômetro. Os pacientes eram portadores de próteses parciais removíveis inferiores classes I, II ou III. A arcada antagonista era prótese, parcial removível ou fixa, ou total. Os resultados permitiram concluir que: as selas de extremidade livre, principalmente em suas posições extremas, conduziram a forças de mordida muito baixas; o envolvimento de prótese total, também, conduziu a forças de mordida baixas; o sexo masculino alcançou valores maiores que o feminino; com prótese parcial removível classe III, os dentes naturais molares e pré-molares desenvolveram valores maiores do que com classes I e II.The purpose of this study was to determine the biting forces of individuals wearing classes I, II or III partially removable mandibular dentures. Upper jaws presented fixed bridges, classes I, II or III partially removable dentures, or complete dentures. Measurements of biting forces were obtained by a gnathodynamometer. The conclusions were: classes I and II presented low biting forces, specially far from the last abutment tooth; when the opposite arcade was a complete denture, biting forces were low; males presented higher biting forces than females; natural molars and bicuspids presented higher biting forces with class III than with classes I or II.

  8. Effect of telescopic distal extension removable partial dentures on oral health related quality of life and maximum bite force: A preliminary cross over study.

    Science.gov (United States)

    Elsyad, Moustafa Abdou; Mostafa, Aisha Zakaria

    2018-01-01

    This cross over study aimed to evaluate the effect of telescopic distal extension removable partial dentures on oral health related quality of life and maximum bite force MATERIALS AND METHODS: Twenty patients with complete maxillary edentulism and partially edentulous mandibles with anterior teeth only remaining were selected for this cross over study. All patients received complete maxillary dentures and mandibular partial removable dental prosthesis (PRDP, control). After 3 months of adaptation, PRDP was replaced with conventional telescopic partial dentures (TPD) or telescopic partial dentures with cantilevered extensions (TCPD) in a quasi-random method. Oral health related quality of life (OHRQoL) was measured using OHIP-14 questionnaire and Maximum bite force (MBF) was measured using a bite force transducer. Measurements were performed 3 months after using each of the following prostheses; PRDP, TPD, and TCPD. TCPD showed the OHIP-14 lowest scores (i.e., the highest patient satisfaction with their OHRQoL), followed by TPD, and PRDP showed the highest OHIP-14 scores (i.e., the lowest patient satisfaction with OHRQoL). TCPD showed the highest MBF (70.7 ± 3.71), followed by TPD (57.4 ± 3.43) and the lowest MBF (40.2 ± 2.20) was noted with PRDP. WITHIN The Limitations of This Study, Mandibular Telescopic Distal Extension Removable Partial Dentures with Cantilevered Extensions Were Associated with Improved Oral Health Related Quality of Life and Maximum Bite Force Compared to Telescopic or Conventional PRDP. Telescopic distal extension removable prostheses is an esthetic restoration in partially edentulous patients with free end saddle. This article describes the addition of cantilevered extensions of this prosthesis. The results showed that telescopic distal extension removable prostheses with cantilevered extensions were associated with improved oral health related quality of life and maximum bite force compared to telescopic or conventional RPDs

  9. Community analysis of biting midges (Culicoides Latr.) on livestock farms in Denmark

    DEFF Research Database (Denmark)

    Nielsen, S. A.; Banta, G.; Rasmussen, Anne-Marie

    2014-01-01

    This study presents descriptive statistics and community analysis of adult biting midges trapped at 16 livestock farms by means of light traps on Zealand and Lolland-Falster, Denmark. A total of 9,047 male and female Culicoides divided into 24 species, were caught. Biotic and abiotic factors...... ranging from presence of different host species (cattle or sheep/goats), presence of small woody areas or wetlands in the surrounding landscape, and agricultural practice (organic or conventional) were included in the community analysis. Only differences in the Culicoides communities between conventional...... and organic practices were tested significantly different. Total numbers of Culicoides individuals were higher on the organic farms than on the conventional farms. The larger loads of biting midges on the organic farms may be due to free-ranging animals that attracted the midges on pastures and carried them...

  10. Bite Mark Analysis in Foodstuffs and Inanimate Objects and the Underlying Proofs for Validity and Judicial Acceptance.

    Science.gov (United States)

    Rivera-Mendoza, Fernando; Martín-de-Las-Heras, Stella; Navarro-Cáceres, Pablo; Fonseca, Gabriel M

    2018-03-01

    Even though one of the first bite mark cases was Doyle v. State in 1954 (a bitten cheese case), the research has focused on bite marks inflicted in human skin. As published Papers, Case Reports, or Technical Notes can constitute precedents which are relied upon in making the legal arguments and a considerable amount of case law exists in this area, we present a systematic review on bite mark analysis in foodstuffs and inanimate objects and their underlying proofs for validity and judicial acceptance according to Daubert rulings. Results showed that there is vulnerability in these procedures, and it is essential to demand for focus scrutiny on the known error rates when such evidence is presented in trials. These kinds of bite marks are well documented; however, there has been little research in this field knowing that the protocols of analysis and comparison are the responsibility of the forensic odontologists. © 2017 American Academy of Forensic Sciences.

  11. Implant-tooth-supported fixed partial prostheses: correlations between in vivo occlusal bite forces and marginal bone reactions.

    Science.gov (United States)

    Akça, Kivanç; Uysal, Serdar; Cehreli, Murat Cavit

    2006-06-01

    To evaluate maximal occlusal bite forces (MOF) and marginal bone level (MBL) changes in patients with implant-tooth-supported fixed partial prostheses (FPP). Twenty nine partially edentulous patients consecutively who received 34 three-occlusal unit FPP with terminal implant and tooth support were subjected to quantification of MOFs using a sub-miniature load cell connected to a data acquisition system and measurement of the MBL changes around implants in digitalized periapical radiographs obtained at prostheses delivery and 24-month follow-up. MOFs for implant support (mean: 353.61 N) significantly differed from tooth support (mean: 275.48 N) (P 0.05). MBL changes at mesial and distal sites of the implants at 24 months of functional loading were 0.28 and 0.097 mm respectively. Although MOFs under functional loading might indicate an increase in load participation for supporting implant, the rigid connection between implant and natural tooth via three-occlusal unit FPP does not jeopardize the time-dependent MBL stability of the implant under functional loads.

  12. Analysis of bite marks in foodstuffs by computer tomography (cone beam CT)--3D reconstruction.

    Science.gov (United States)

    Marques, Jeidson; Musse, Jamilly; Caetano, Catarina; Corte-Real, Francisco; Corte-Real, Ana Teresa

    2013-12-01

    The use of three-dimensional (3D) analysis of forensic evidence is highlighted in comparison with traditional methods. This three-dimensional analysis is based on the registration of the surface from a bitten object. The authors propose to use Cone Beam Computed Tomography (CBCT), which is used in dental practice, in order to study the surface and interior of bitten objects and dental casts of suspects. In this study, CBCT is applied to the analysis of bite marks in foodstuffs, which may be found in a forensic case scenario. 6 different types of foodstuffs were used: chocolate, cheese, apple, chewing gum, pizza and tart (flaky pastry and custard). The food was bitten into and dental casts of the possible suspects were made. The dental casts and bitten objects were registered using an x-ray source and the CBCT equipment iCAT® (Pennsylvania, EUA). The software InVivo5® (Anatomage Inc, EUA) was used to visualize and analyze the tomographic slices and 3D reconstructions of the objects. For each material an estimate of its density was assessed by two methods: HU values and specific gravity. All the used materials were successfully reconstructed as good quality 3D images. The relative densities of the materials in study were compared. Amongst the foodstuffs, the chocolate had the highest density (median value 100.5 HU and 1,36 g/cm(3)), while the pizza showed to have the lowest (median value -775 HU and 0,39 g/cm(3)), on both scales. Through tomographic slices and three-dimensional reconstructions it was possible to perform the metric analysis of the bite marks in all the foodstuffs, except for the pizza. These measurements could also be obtained from the dental casts. The depth of the bite mark was also successfully determined in all the foodstuffs except for the pizza. Cone Beam Computed Tomography has the potential to become an important tool for forensic sciences, namely for the registration and analysis of bite marks in foodstuffs that may be found in a crime

  13. Insect bites and stings

    Science.gov (United States)

    ... widow spider bite; Brown recluse bite; Flea bite; Honey bee or hornet sting; Lice bites; Mite bite; ... Saunders; 2016:chap 359. Otten EJ. Venomous animal injuries. In: Walls RM, Hockberger RS, Gausche-Hill M, ...

  14. TRIGA forced shutdowns analysis

    International Nuclear Information System (INIS)

    Negut, Gheorghe; Laslau, Florica

    2008-01-01

    The need for improving the operation leads us to use new methods and strategies. Probabilistic safety assessments and statistical analysis provide insights useful for our reactor operation. This paper is dedicated to analysis of the forced shutdowns during the first reactor operation period, between 1980 to 1989. A forced shutdown data base was designed using data on forced shutdowns collected from the reactor operation logbooks. In order to sort out the forced shutdowns the records have the following fields: - current number, date, equipment failed, failure type (M for mechanical, E for electrical, D for irradiation device, U for human factor failure; - scram mode, SE for external scram, failure of reactor cooling circuits and/or irradiation devices, SR for reactor scram, exceeding of reactor nuclear parameters, SB for reactor scram by control rod drop, SM for manual scram required by the abnormal reactor status; - scram cause, giving more information on the forced shutdown. This data base was processed using DBase III. The data processing techniques are presented. To sort out the data, one of the criteria was the number of scrams per year, failure type, scram mode, etc. There are presented yearly scrams, total operation time in hours, total unavailable time, median unavailable time period, reactor availability A. There are given the formulae used to calculate the reactor operational parameters. There are shown the scrams per year in the 1980 to 1989 period, the reactor operation time per year, the reactor shutdown time per year and the operating time versus down time per year. Total number of scrams in the covered period was 643 which caused a reactor down time of 4282.25 hours. In a table the scrams as sorted on the failure type is shown. Summarising, this study emphasized some problems and difficulties which occurred during the TRIGA reactor operation at Pitesti. One main difficulty in creating this data base was the unstandardized scram record mode. Some times

  15. Animal Bites

    Science.gov (United States)

    Wild animals usually avoid people. They might attack, however, if they feel threatened, are sick, or are protecting their ... or territory. Attacks by pets are more common. Animal bites rarely are life-threatening, but if they ...

  16. Influence of sustained submaximal clenching fatigue test on electromyographic activity and maximum voluntary bite forces in healthy subjects and patients with temporomandibular disorders.

    Science.gov (United States)

    Xu, L; Fan, S; Cai, B; Fang, Z; Jiang, X

    2017-05-01

    This study aimed to investigate whether the fatigue induced by sustained motor task in the jaw elevator muscles differed between healthy subjects and patients with temporomandibular disorder (TMD). Fifteen patients with TMD and thirteen age- and sex-matched healthy controls performed a fatigue test consisting of sustained clenching contractions at 30% maximal voluntary clenching intensity until test failure (the criterion for terminating the fatigue test was when the biting force decreased by 10% or more from the target force consecutively for >3 s). The pre- and post-maximal bite forces (MBFs) were measured. Surface electromyographic signals were recorded from the superficial masseter muscles and anterior temporal muscles bilaterally, and the median frequency at the beginning, middle and end of the fatigue test was calculated. The duration of the fatigue test was also quantified. Both pre- and post-MBFs were lower in patients with TMD than in controls (P fatigue test in TMD patients was significantly shorter than that of the controls (P fatigued, but the electromyographic activation process during the fatigue test is similar between healthy subjects and patients with TMD. However, the mechanisms involved in this process remain unclear, and further research is warranted. © 2017 John Wiley & Sons Ltd.

  17. Sex-specific trade-offs and compensatory mechanisms: bite force and sprint speed pose conflicting demands on the design of geckos (Hemidactylus frenatus).

    Science.gov (United States)

    Cameron, S F; Wynn, M L; Wilson, R S

    2013-10-15

    One of the more intuitive viability costs that can result from the possession of exaggerated sexually selected traits is increased predation pressure as a result of reduced locomotor capacity. Despite mixed empirical support for such locomotor costs, recent studies suggest that such costs may be masked by compensatory traits that effectively offset any detrimental effects. In this study, we provide a comprehensive assessment of the locomotor costs associated with improved male-male competitive ability by simultaneously testing for locomotor trade-offs and potential compensatory mechanisms in territorial male and non-territorial female geckos. Fighting capacity and escape performance of male Asian house geckos (Hemidactylus frenatus) are likely to pose conflicting demands on the optimum phenotype for each task. Highly territorial and aggressive males may require greater investment in head size/strength but such an enhancement may affect overall escape performance. Among male geckos, we found that greater biting capacity because of larger head size was associated with reduced sprint performance; this trade-off was further exacerbated when sprinting on an incline. Females, however, showed no evidence of this trade-off on either flat or inclined surfaces. The sex specificity of this trade-off suggests that the sexes differ in their optimal strategies for dealing with the conflicting requirements of bite force and sprint speed. Unlike males, female H. frenatus had a positive association between hind-limb length and head size, suggesting that they have utilised a compensatory mechanism to alleviate the possible locomotor costs of larger head sizes. It appears that there is greater selection on traits that improve fighting ability (bite force) for males, but it is viability traits (sprint speed) that appear to be of greater importance for females. Our results emphasise that only by examining both functional trade-offs and potential compensatory mechanisms is it possible

  18. Human bites - self-care

    Science.gov (United States)

    Bites - human - self-care ... Human bites can occur in 2 ways: If someone bites you If your hand comes into contact ... bite to express anger or other negative feelings. Human bites may be more dangerous than animal bites. ...

  19. Cat and Dog Bites

    Science.gov (United States)

    ... Wellness Staying Healthy Pets and Animals Cat and Dog Bites Cat and Dog Bites Share Print Cat and dog bites are common injuries. A family pet or ... bites. Path to safety If a cat or dog bites you, you should: Wash the wound gently ...

  20. Insect Bites and Stings

    Science.gov (United States)

    Most insect bites are harmless, though they sometimes cause discomfort. Bee, wasp, and hornet stings and fire ant bites usually hurt. Mosquito and flea bites usually itch. Insects can also spread diseases. In the United States, ...

  1. Spider Bites (For Parents)

    Science.gov (United States)

    ... Videos for Educators Search English Español First Aid: Spider Bites KidsHealth / For Parents / First Aid: Spider Bites ... rare. Signs and Symptoms Of a brown recluse spider bite: red blister in the center with surrounding ...

  2. Electrical performance analysis and economic evaluation of combined biomass cook stove thermoelectric (BITE) generator.

    Science.gov (United States)

    Lertsatitthanakorn, C

    2007-05-01

    The use of biomass cook stoves is widespread in the domestic sector of developing countries, but the stoves are not efficient. To advance the versatility of the cook stove, we investigated the feasibility of adding a commercial thermoelectric (TE) module made of bismuth-telluride based materials to the stove's side wall, thereby creating a thermoelectric generator system that utilizes a proportion of the stove's waste heat. The system, a biomass cook stove thermoelectric generator (BITE), consists of a commercial TE module (Taihuaxing model TEP1-1264-3.4), a metal sheet wall which acts as one side of the stove's structure and serves as the hot side of the TE module, and a rectangular fin heat sink at the cold side of the TE module. An experimental set-up was built to evaluate the conversion efficiency at various temperature ranges. The experimental set-up revealed that the electrical power output and the conversion efficiency depended on the temperature difference between the cold and hot sides of the TE module. At a temperature difference of approximately 150 degrees C, the unit achieved a power output of 2.4W. The conversion efficiency of 3.2% was enough to drive a low power incandescent light bulb or a small portable radio. A theoretical model approximated the power output at low temperature ranges. An economic analysis indicated that the payback period tends to be very short when compared with the cost of the same power supplied by batteries. Therefore, the generator design formulated here could be used in the domestic sector. The system is not intended to compete with primary power sources but serves adequately as an emergency or backup source of power.

  3. Blood meal analysis of tabanid fly after it biting the rare Sumatran rhinoceros

    OpenAIRE

    Jeffrine Japning Rovie-Ryan; Zainal Zahari Zainuddin; Wahap Marni; Abdul Hamid Ahmad; Laurentius N. Ambu; Junaidi Payne

    2013-01-01

    Objective: To demonstrate a noninvasive large mammalian genetic sampling method using blood meal obtained from a tabanid fly. Methods: Blood meal was recovered from the abdomen of an engorged tabanid fly (Haematopota sp.) which was captured immediately after biting a Sumatran rhino in captivity. The blood was applied on to a Whatman FTA® blood card. Subsequent laboratory work was conducted to extract, amplify and sequence the DNA from the sample. Validation was done by sampling the hair fo...

  4. Animal Bites: First Aid

    Science.gov (United States)

    First aid Animal bites: First aid Animal bites: First aid By Mayo Clinic Staff These guidelines can help you care for a minor animal bite, such ... 26, 2017 Original article: http://www.mayoclinic.org/first-aid/first-aid-animal-bites/basics/ART-20056591 . Mayo ...

  5. Condylar position analysis with a new electronic condylar position measuring instrument E-CPM: influence of different examiners and a working bite on reproducibility.

    Science.gov (United States)

    Vahle-Hinz, K; Rybczynski, A; Jakstat, H; Ahlers, M O

    2009-01-01

    Condylar position analysis facilitates a quantitative comparison of the condylar position with and without a bite record, different records and changed influencing factors. Handling by the examiner when positioning the model is a significant factor with regard to the accuracy of the examination. Measurement accuracy could be improved when positioning the models by using special working bites, hence the objective of the experiments described in this study consisted in examining the extent to which the measuring results are influenced by different examiners and by using working bites. In the first trial, one examiner performed ten measurements without and with an interposed working bite for five model pairs in each case. In the second trial, nine examiners (three specialized dentists, three dental assistants, three students) performed ten measurements in each case without and with an interposed working bite. The three-dimensional position was read digitally with the E-CPM (Gamma Dental, Klosterneuburg/Vienna, Austria), recorded by means of spreadsheet software (Microsoft Excel) and diagnostic software (CMDfact, CMD3D module, dentaConcept, Hamburg), and evaluated with graphing software (Sigma Plot, Systat Software, USA). In the first trial, it was shown that the reproducibility of mounting was improved markedly (p <0.01) by using bite records in the form of working bites. In the second trial, it was shown that the mean error increased significantly (p <0.01) when several examiners performed the measurements compared with the results of one examiner alone. No significantly different results occurred (p < 0.01) in the comparison of the different groups of examiners with different educational and training backgrounds. This applied for the mounting methods without and with working bite. On the other hand, the reproducibility of mounting improved distinctly (p<0.01) in every group of examiners when working bites were used. Reproducibility of condylar position analysis was

  6. Chewing efficiency, bite force and oral health-related quality of life with narrow diameter implants - a prospective clinical study: results after one year.

    Science.gov (United States)

    Enkling, Norbert; Saftig, Marcus; Worni, Andreas; Mericske-Stern, Regina; Schimmel, Martin

    2017-04-01

    This prospective study aimed to investigate the evolution of chewing efficiency, maximum voluntary bite force (MBF) and oral health-related quality of life (OHRQoL) in edentulous patients treated with narrow diameter implants (NDIs) over the course of 1 year. Four NDIs (MDI ® , 3M ESPE, diameter 1.8 mm) were placed interforaminally in 20 edentulous patients. They were immediately loaded by converting the existing prosthesis into an implant overdenture. Participants were examined six times pre- and postoperatively [baseline (BL) to week 52 (w52)]. Chewing efficiency was evaluated with a colour-mixing ability test by evaluation of the standard deviation of hue (VOH, ViewGum©). MBF was measured using a digital force gauge. OHRQoL was determined with the Oral Health Impact Profile (OHIPG49). Nonparametric Brunner-Langer models were applied for statistical testing. The study failed to demonstrate an effect on chewing efficiency. MBF increased continuously during the observation period (medians: MBF[N]@BL = 46.6 [iqr 50.1]; MBF[N]@w52 = 103.9 [iqr 76.0]; P = 0.002). OHRQoL increased steeply after implant loading and continued improving (medians: BL ∑OHIPG49 = 31 [iqr 40.0]; w4 ∑OHIPG49 = 11.5 [iqr 19.5]; w52 ∑OHIPG49 = 6 [iqr 13.0], P chewing instructions. Larger studies need to confirm a positive effect on chewing efficiency and develop long-term maintenance solutions if patients become frail because no easy downgrading approaches of one-piece titanium implants exist. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Evaluación electromiográfica de los músculos masticadores durante la fuerza máxima de mordedura Electromyography evaluations of the masticator muscles during the maximum bite force

    Directory of Open Access Journals (Sweden)

    M.J.P. Coelho-Ferraz

    2008-12-01

    the masseter, anterior portion of temporal and suprahyoid muscles in the postural and isometric positions. Were utilized surface passive electrodes for kids of Ag/AgCl, of circular format and dischargeable of Meditrace® Kendall-LTP, model Chicopee MA01, attached to a pre-amplifier with gain of 20 times forming a differential circuit. The records of the electrical signs were captured by the equipment EMG-8OOC of EMG System of Brazil Ltd. of eight channels, with frequency of 2 KHz and 16 bits of resolution, digital filter with band pass of 20 to 500Hz. It was utilized also a pressurized transductor which consists of a pressurized rubber tube connected to a sensor element (MPX 5700 to obtain the maximum bite force. The statistic tests used were linear correlation, test t in pair and analysis of variance. Probability of p<0, 05 were significant considered statistically. The results showed a certain degree of muscular asymmetry for the masseter and anterior portion of temporal muscles that depended on the task performed or contraction level. The index of asymmetry was lower in the postural position than in the maximum bite force.

  8. BiteStrip analysis of the effect of fluoxetine and paroxetine on sleep bruxism.

    Science.gov (United States)

    Isa Kara, M; Ertaş, Elif Tarım; Ozen, Emrullah; Atıcı, Meral; Aksoy, Selami; Erdogan, Muharrem Serif; Kelebek, Seyfi

    2017-08-01

    The relationship between sleep bruxism (SB) and selective serotonin reuptake inhibitors (SSRIs) is still under debate because of the lack of well-designed objective studies. The current study investigates possible effects of SSRIs, fluoxetine, and paroxetine on SB in patients with anxiety and depression. Thirty users of SSRIs for treatment of depression or anxiety were enrolled in the study. After clinical and anamnestic examination, 15 fluoxetine and 15 paroxetine users were included. For an objective evaluation of SB, a single-use disposable home screening device, BiteStrip, was used prior to the first SSRI intake and was repeated on the 7th and 15th days. Patients' self-reported data also were obtained for assessment of patient awareness. BiteStrip scores were significantly higher on the 7th and 15th days than the first measurement (pfluoxetine or paroxetine. Fluoxetine and paroxetine, SSRIs used for the treatment of anxiety and depression, may initiate or aggravate SB. Clinicians should consider that SSRIs may be the cause of SB when SSRI users are referred to dental clinics for SB symptoms. As there is a shortage of researches on this subject, further studies are necessary to confirm the existence of SSRI-induced SB. Copyright © 2016. Published by Elsevier Ltd.

  9. Animal Bites of the Hand

    Science.gov (United States)

    ... Therapist? Media Find a Hand Surgeon Home Anatomy Animal Bites Email to a friend * required fields From * ... key to prevent problems from a bite. CAUSES Animal Bites Millions of animal bites occur in the ...

  10. Blood meal analysis of tabanid fly after it biting the rare Sumatran rhinoceros.

    Science.gov (United States)

    Rovie-Ryan, Jeffrine Japning; Zainuddin, Zainal Zahari; Marni, Wahap; Ahmad, Abdul Hamid; Ambu, Laurentius N; Payne, Junaidi

    2013-02-01

    To demonstrate a noninvasive large mammalian genetic sampling method using blood meal obtained from a tabanid fly. Blood meal was recovered from the abdomen of an engorged tabanid fly (Haematopota sp.) which was captured immediately after biting a Sumatran rhino in captivity. The blood was applied on to a Whatman FTA(®) blood card. Subsequent laboratory work was conducted to extract, amplify and sequence the DNA from the sample. Validation was done by sampling the hair follicles and blood samples from the rhinoceros and subjecting it to the same laboratory process. BLAST search and constructed phylogenetic trees confirmed the blood meal samples were indeed from the rhino. This method could be used in the field application to noninvasively collect genetic samples. Collection of tabanids and other haematophagous arthropods (e.g. mosquitoes and ticks) and other blood-sucking parasites (e.g. leeches and worms) could also provide information on vector-borne diseases.

  11. Bug Bites and Stings

    Science.gov (United States)

    ... can carry other diseases, such as malaria and dengue fever. Spider Bites Most spider bites are minor, ... Clean the area with soap and water, and treat with an antiseptic or antibiotic cream to avoid ...

  12. Human bites (image)

    Science.gov (United States)

    Human bites present a high risk of infection. Besides the bacteria which can cause infection, there is ... the wound extends below the skin. Anytime a human bite has broken the skin, seek medical attention.

  13. Exotic reptile bites.

    Science.gov (United States)

    Kelsey, J; Ehrlich, M; Henderson, S O

    1997-09-01

    Reptiles are a growing part of the exotic pet trade, and reptile bites have been considered innocuous in the emergency medicine literature. Two cases are reported of reptile bites, one from a green iguana and the other from a reticulated python. The treatment concerns associated with reptile bites are discussed.

  14. Impact velocities of the teeth after a sudden unloading at various initial bite forces, degrees of mouth opening, and distances of travel

    NARCIS (Netherlands)

    Nagashima, T; Slager, GEC; Broekhuijsen, ML; vanWilligen, JD

    A potentially dangerous situation arises when an individual bites on hard and brittle food which suddenly breaks, since the impact velocity of the lower teeth onto the upper teeth after the food is broken can be high and may cause dental damage. The present experiments were designed to study the

  15. Open bite in prematurely born children.

    Science.gov (United States)

    Harila, V; Heikkinen, T; Grön, M; Alvesalo, L

    2007-01-01

    The aims of this study were to: examine the expression of open bite in prematurely born children and discuss the etiological factors that may lead to bite it. The subjects were 328 prematurely born (cross-sectional study of the Collaborative Perinatal Project in the 1960s and 1970s. Dental documents, including casts and photographs, were taken once at the age of 6-12 years in the mixed dentition. The occlusion was recorded by examining and measuring the hard stone casts. Vertical open bite was recorded only for full erupted teeth. The statistical method used was chi-square analysis. Significant differences in the incidence of anterior open bite (from left to right canine) was found between the preterm and control groups and between gender and ethnic groups. The prevalence of anterior open bite was nearly 9% in the preterm group and almost 7% in the control group. African Americans (9%) had a significantly greater incidence of open bite than Caucasians (3%; Pbite than boys (8% vs 6%; Pbite was increased--especially in preterm African American boys compared to controls (11% vs 8%). The results show differences in the development of anterior open bite between ethnic and gender groups. Premature birth may also influence dental occlusal development. Of importance are the patient's: general health condition; respiratory infections; inadequate nasal- and mouth-breathing; oral habits; and other medical problems. Preterm children may be relatively more predisposed to etiological factors for the development of anterior open bite.

  16. Animal bites - self-care

    Science.gov (United States)

    Bites - animals - self-care ... Most animal bites come from pets. Dog bites are common and most often happen to children. Cat bites are ... which can cause deeper puncture wounds. Most other animal bites are caused by stray or wild animals, ...

  17. Estimation of Dog-Bite Risk and Related Morbidity Among Personnel Working With Military Dogs.

    Science.gov (United States)

    Schermann, H; Eiges, N; Sabag, A; Kazum, E; Albagli, A; Salai, M; Shlaifer, A

    Soldiers serving in the Israel Defense Force Military Working Dogs (MWD) Unit spend many hours taming dogs' special skills, taking them on combat missions, and performing various dogkeeping activities. During this intensive work with the aggressive military dogs, bites are common, and some of them result in permanent disability. However, this phenomenon has not been quantified or reported as an occupational hazard. This was a retrospective cohort study based on self-administered questionnaires. Information was collected about soldiers' baseline demographics, duration of the experience of working with dogs, total number of bites they had, circumstances of bite events, and complications and medical treatment of each bite. Bite risk was quantified by incidence, mean time to first bite, and a Cox proportional hazards model. Rates of complications and the medical burden of bites were compared between combat soldiers and noncombat dogkeepers. Bite locations were presented graphically. Seventy-eight soldiers participated and reported on 139 bites. Mean time of working with dogs was 16 months (standard deviation, ±9.4 months). Overall bite incidence was 11 bites per 100 person-months; the mean time to first bite event was 6.3 months. The Cox proportional hazards model showed that none of baseline characteristics significantly increased bite hazard. About 90% of bites occurred during routine activities, and 3.3% occurred on combat missions. Only in 9% of bite events did soldiers observed the safety precautions code. Bite complications included fractures, need for intravenous antibiotic treatment and surgical repair, prominent scarring, diminished sensation, and stiffness of proximal joints. Bite complications were similar between combat soldiers and dogkeepers. Most bites (57%) were located on hands and arms. MWD bites are an occupational hazard resulting in significant medical burden. Hands and arms were most common bite locations. Observance of safety precautions may be

  18. Evaluation of muscle activity, bite force and salivary cortisol in children with bruxism before and after low level laser applied to acupoints: study protocol for a randomised controlled trial.

    Science.gov (United States)

    Salgueiro, Mônica da Consolação Canuto; Bortoletto, Carolina Carvalho; Horliana, Anna Carolina RattoTempestini; Mota, Ana Carolina Costa; Motta, Lara Jansiski; Motta, Pamella de Barros; MesquitaFerrari, Raquel Agnelli; Fernandes, Kristianne Porta Santos; Bussadori, Sandra Kalil

    2017-08-08

    Bruxism is a repetitive activity that causes tooth wear, audible sounds, and discomfort. Preventive measures have been studied for conditions that can exert a negative influence on physiological development in children. Low-level laser therapy administered over acupoints is an effective, painless, low-cost treatment option that has achieved good results. Thus, the aim of the proposed study is to evaluate changes in muscle activity, bite force and salivary cortisol in children with bruxism after the application of low-level laser to accupoints. The children will be randomly allocated to four groups of 19 individuals: G1 - low-level laser; G2 - occlusal splint; G3 - placebo laser; and G4 - control (without bruxism). The BTS TMJOINT electromyography will be used to determine muscle activity and a digital gnathodynamometer will be used to measure bite force. Salivary cortisol will be analysed at baseline as well as one and six months after treatment. Two-way ANOVA will be employed and complemented by Tukey's test. Bruxism is a repetitive activity of the masticatory muscles that can have negative consequences if not treated, such as tooth wear, noises, discomfort and anxiety. Thus, control and treatment measures should be taken. Although low-level laser therapy over acupoints has been indicated for children, the effects of this treatment modality have not yet been studied. NCT02757261 on 8 April 2016. This study protocol received a grant from the Brazilian fostering agency São Paulo Research Foundation (FAPESP: #2015/24731-0).

  19. Court presentation of bite mark evidence.

    Science.gov (United States)

    Drinnan, A J; Melton, M J

    1985-12-01

    The uniqueness of an individual's bite mark is generally accepted. The use of bite mark analysis to identify or exclude those suspected of crimes is now a well established activity in forensic dentistry. Although the techniques for evaluating bite mark evidence are extremely sophisticated, it is important that the courtroom presentation of such evidence should be as simple as possible and be directed towards those who must judge it. Dentists likely to be involved in the courtroom presentation of bite mark evidence should: be certain that their local law enforcement personnel are frequently updated on the techniques to be used for producing the optimum evidence needed to evaluate bite marks; become acquainted with the current techniques of evaluating bite mark evidence and understand their difficulties and pitfalls; meet with the lawyers (prosecution or defence) before a courtroom appearance, briefing them on the significance of the particular findings; prepare clear and easily understandable visual aids to present to the court the techniques used in the analysis and the bases for the conclusion reached; and offer conclusions derived from the bite mark investigation.

  20. Software Process Improvement Using Force Field Analysis ...

    African Journals Online (AJOL)

    An improvement plan is then drawn and implemented. This paper studied the state of Nigerian software development organizations based on selected attributes. Force field analysis is used to partition the factors obtained into driving and restraining forces. An attempt was made to improve the software development process ...

  1. Nonlinear structural analysis using integrated force method

    Indian Academy of Sciences (India)

    A new formulation termed the Integrated Force Method (IFM) was proposed by Patnaik ... nated ``Structure (nY m)'' where (nY m) are the force and displacement degrees of ..... Patnaik S N, Yadagiri S 1976 Frequency analysis of structures.

  2. Spider Bites: First Aid

    Science.gov (United States)

    ... care immediately if: You were bitten by a black widow or brown recluse spider You are unsure whether the bite ... in the South. Signs and symptoms of a black widow spider bite may include: At ... fever and nausea Brown recluse spider The brown recluse spider has a ...

  3. [Mammal bite management].

    Science.gov (United States)

    Contreras-Marín, Misael; Sandoval-Rodríguez, Jorge Issac; García-Ramírez, Raúl; Morales-Yépez, Héctor Adolfo

    Animal bites are a major public health problem, it is estimated that 2% of the population is bitten each year. Most bites are by dogs and the risk factors include young children, men, certain breeds of dogs and untrained dogs. The risk of infection after bites differs between animal species and depends on the animal teeth and oral flora. Animal bites are still a major cause of morbidity in patients of all ages and have caused several preventable childhood deaths. These wounds often become infected. If the wound requires it, early surgical evaluation must be performed. The use of antibiotics is only recommended for high risk bite wounds. Copyright © 2016 Academia Mexicana de Cirugía A.C. Publicado por Masson Doyma México S.A. All rights reserved.

  4. Eggs for breakfast? Analysis of a probable mosasaur biting trace on the Cretaceous echinoid Echinocorys ovata Leske, 1778

    Directory of Open Access Journals (Sweden)

    C. Neumann

    2018-02-01

    Full Text Available Fossil biting traces (praedichnia represent indirect evidence of predation and shed light on fossil predator–prey interactions and fossil food webs. Especially from echinoderm skeletons, biting traces are well known. Here, we describe the oral surface of a large Cretaceous (Maastrichtian holasteroid echinoid Echinocorys ovata Leske, 1778 from Hemmoor (northern Germany which exhibits four circular punctures arranged in a semi-circular arc. Whereas three of the punctures penetrated the skeleton, one puncture only just hit the margin of the echinoid test at the ambitus, leaving a long incision furrow in the skeleton. The punctures were not lethal to the sea urchin as is indicated by progressed skeletal regeneration and closure of the fractures. The overall appearance of the punctures suggests that they were produced during a single mechanical event, most likely by the biting action of the teeth of a large vertebrate animal. We analysed the shape and arrangement of the biting trace and conclude that it was probably produced by a marine reptile possessing a prognath tooth position, most likely by a globidensine mosasauroid. Our finding not only sheds light on mosasaur feeding behaviour and prey selection but also increases the knowledge of the food webs in the chalk sea ecosystem during the uppermost Cretaceous.

  5. Retrospective analysis of facial dog bite injuries at a Level I trauma center in the Denver metro area.

    Science.gov (United States)

    Gurunluoglu, Raffi; Glasgow, Mark; Arton, Jamie; Bronsert, Michael

    2014-05-01

    Facial dog bite injuries pose a significant public health problem. Seventy-five consecutive patients (45 males, 30 females) treated solely by plastic surgery service for facial dog bite injuries at a Level I trauma center in the Denver Metro area between 2006 and 2012 were retrospectively reviewed. The following information were recorded: breed, relationship of patient to dog, location and number of wounds, the duration between injury and surgical repair and dog bite incident, type of repair, and antibiotic prophylaxis. Primary end points measured were wound infection, the need for revision surgery, and patient satisfaction. Ninety-eight wounds in the head and neck region were repaired (46 children; mean age, 6.8 years) and (29 adults; mean age, 47.3 years). Twelve different breeds were identified. There was no significant association between the type of dog breed and the number of bite injuries. The duration between injury and repair ranged from 4 hours to 72 hours (mean [SD], 13.7 [10.9] hours). The majority of bite wounds (76 of 98) involved the cheek, lip, nose, and chin region. Direct repair was the most common surgical approach (60 of 98 wounds) (p reconstruction versus direct repair according to dog breed (p = 0.25). Ten wounds required grafting. Twenty-five wounds were managed by one-stage or two-stage flaps. Only three patients (3.06 %) underwent replantation/revascularization of amputated partial lip (n = 2) and of cheek (n = 1). There was one postoperative infection. Data from five-point Likert scale were available for fifty-two patients. Forty patients were satisfied (5) with the outcome, while five patients were somewhat satisfied (4), and seven were neutral. Availability of the plastic surgery service at a Level I trauma center is vital for the optimal treatment of facial dog bite injuries. Direct repair and reconstruction of facial dog bite injuries at the earliest opportunity resulted in good outcomes as evidenced by the satisfaction survey data and

  6. Masticatory performance and bite force in children with primary dentition Performance mastigatória e força de mordida em crianças na dentição decídua

    Directory of Open Access Journals (Sweden)

    Maria Beatriz Duarte Gavião

    2007-06-01

    Full Text Available The aim of this study was to evaluate the relationship between masticatory performance and maximum bite force in the primary dentition. The sample comprised 15 children of both genders, aged 3 to 5.5 years, with good systemic and oral health, presence of all primary teeth without large caries, no structural anomalies, without severe malocclusion, and no history of orthodontic treatment. They chewed one standardized silicone tablet for 20 strokes and the median areas of the chewed particles were measured by an optical digital system. Enhanced performance was measured by a decrease in the chewed particle areas and an increase in the amount of chewed particles. The bite force was determined using a transmitter pressurized tube connected to an analog/digital electronic circuit. Weight, height and body mass index (kg/m² were determined. The data were analyzed by descriptive statistics and Pearson or Spearman's correlations, after assessment of the normality of the distribution by Shapiro-Wilks' W-test. There was no correlation between bite force and particle area and amount (p > 0.05, neither were the body variables correlated with the masticatory variables (p > 0.05. It was concluded that the bite force was not a primary determinant of masticatory performance, and both variables were not dependent on body variables in the studied sample.O objetivo deste estudo foi avaliar a correlação entre performance mastigatória e força de mordida máxima na dentição decídua. A amostra consistiu de 15 crianças de 3 a 5,5 anos de idade, de ambos os gêneros, apresentando boa saúde bucal e sistêmica, com a presença de todos os dentes decíduos, sem cáries extensas, sem anomalias estruturais, sem maloclusão severa e ausência de tratamento ortodôntico. Um tablete de silicone foi mastigado durante 20 ciclos e as áreas medianas das partículas foram mensuradas por um sistema óptico digital. A performance mastigatória foi considerada melhor quanto

  7. Fire Ant Bites

    Science.gov (United States)

    ... Favorite Name: Category: Share: Yes No, Keep Private Fire Ant Bites Share | Fire ants are aggressive, venomous insects that have pinching ... across the United States, even into Puerto Rico. Fire ant stings usually occur on the feet or ...

  8. Avoid Mosquito Bites

    Science.gov (United States)

    ... visiting CDC Travelers’ Health website . Pack a travel health kit . Remember to pack insect repellent and use it as directed to prevent mosquito bites. See a healthcare provider familiar with travel medicine, ideally 4 to 6 weeks ...

  9. Fighting and Biting

    Science.gov (United States)

    ... on Demand Maintenance of Certification and Lifelong Learning Modules Online CME Pathways My Profile Store Cart Donate ... child, or put the child down. For a young child (2-3 years) say, "biting is not ...

  10. Environmental Management Strategy: Four Forces Analysis

    Science.gov (United States)

    Doyle, Martin W.; Von Windheim, Jesko

    2015-01-01

    We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

  11. Environmental management strategy: four forces analysis.

    Science.gov (United States)

    Doyle, Martin W; Von Windheim, Jesko

    2015-01-01

    We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

  12. Community analysis of the abundance and diversity of biting midge species (Diptera: Ceratopogonidae) in three European countries at different latitudes.

    Science.gov (United States)

    Möhlmann, Tim W R; Wennergren, Uno; Tälle, Malin; Favia, Guido; Damiani, Claudia; Bracchetti, Luca; Takken, Willem; Koenraadt, Constantianus J M

    2018-03-27

    The outbreaks of bluetongue and Schmallenberg disease in Europe have increased efforts to understand the ecology of Culicoides biting midges and their role in pathogen transmission. However, most studies have focused on a specific habitat, region, or country. To facilitate wider comparisons, and to obtain a better understanding of the spread of disease through Europe, the present study focused on monitoring biting midge species diversity in three different habitat types and three countries across Europe. Biting midges were trapped using Onderstepoort Veterinary Institute light traps at a total of 27 locations in Sweden, the Netherlands and Italy, comprising farm, peri-urban and wetland habitats. From July 2014 to June 2015 all locations were sampled monthly, except for during the winter months. Trapped midges were counted and identified morphologically. Indices on species richness, evenness and diversity were calculated. Community compositions were analysed using non-metric multidimensional scaling (NMDS) techniques. A total of 50,085 female midges were trapped during 442 collection nights. More than 88% of these belonged to the Obsoletus group. The highest midge diversity was found in Sweden, while species richness was highest in the Netherlands, and most specimens were trapped in Italy. For habitats within countries, diversity of the trapped midges was lowest for farms in all countries. Differences in biting midge species communities were more distinct across the three countries than the three habitat types. A core midge community could be identified, in which the Obsoletus group was the most abundant. Variations in vector communities across countries imply different patterns of disease spread throughout Europe. How specific species and their associated communities affect disease risk is still unclear. Our results emphasize the importance of midge diversity data at community level, how this differs across large geographic range within Europe, and its implications

  13. Interactive relationship between the mechanical properties of food and the human response during the first bite.

    Science.gov (United States)

    Dan, Haruka; Kohyama, Kaoru

    2007-05-01

    Biting is an action that results from interplay between food properties and the masticatory system. The mechanical factors of food that cause biting adaptation and the recursive effects of modified biting on the mechanical phenomena of food are largely unknown. We examined the complex interaction between the bite system and the mechanical properties. Nine subjects were each given a cheese sample and instructed to bite it once with their molar teeth. An intra-oral bite force-time profile was measured using a tactile pressure-measurement system with a sheet sensor inserted between the molars. Time, force, and impulse for the first peak were specified as intra-oral parameters of the sample fracture. Mechanical properties of the samples were also examined using a universal testing machine at various test speeds. Besides fracture parameters, initial slope was also determined as a mechanical property possibly sensed shortly after bite onset. The bite profile was then examined based on the mechanical parameters. Sample-specific bite velocities were identified as characteristic responses of a human bite. A negative correlation was found between bite velocity and initial slope of the sample, suggesting that the initial slope is the mechanical factor that modifies the consequent bite velocity. The sample-specific bite velocity had recursive effects on the following fracture event, such that a slow velocity induced a low bite force and high impulse for the intra-oral fracture event. We demonstrated that examination of the physiological and mechanical factors during the first bite can provide valuable information about the food-oral interaction.

  14. Insect bite reactions

    Directory of Open Access Journals (Sweden)

    Sanjay Singh

    2013-01-01

    Full Text Available Insects are a class of living creatures within the arthropods. Insect bite reactions are commonly seen in clinical practice. The present review touches upon the medically important insects and their places in the classification, the sparse literature on the epidemiology of insect bites in India, and different variables influencing the susceptibility of an individual to insect bites. Clinical features of mosquito bites, hypersensitivity to mosquito bites Epstein-Barr virus NK (HMB-EBV-NK disease, eruptive pseudoangiomatosis, Skeeter syndrome, papular pruritic eruption of HIV/AIDS, and clinical features produced by bed bugs, Mexican chicken bugs, assassin bugs, kissing bugs, fleas, black flies, Blandford flies, louse flies, tsetse flies, midges, and thrips are discussed. Brief account is presented of the immunogenic components of mosquito and bed bug saliva. Papular urticaria is discussed including its epidemiology, the 5 stages of skin reaction, the SCRATCH principle as an aid in diagnosis, and the recent evidence supporting participation of types I, III, and IV hypersensitivity reactions in its causation is summarized. Recent developments in the treatment of pediculosis capitis including spinosad 0.9% suspension, benzyl alcohol 5% lotion, dimethicone 4% lotion, isopropyl myristate 50% rinse, and other suffocants are discussed within the context of evidence derived from randomized controlled trials and key findings of a recent systematic review. We also touch upon a non-chemical treatment of head lice and the ineffectiveness of egg-loosening products. Knockdown resistance (kdr as the genetic mechanism making the lice nerves insensitive to permethrin is discussed along with the surprising contrary clinical evidence from Europe about efficacy of permethrin in children with head lice carrying kdr-like gene. The review also presents a brief account of insects as vectors of diseases and ends with discussion of prevention of insect bites and some

  15. Marine animal stings or bites

    Science.gov (United States)

    Stings - marine animals; Bites - marine animals ... Things you can do to prevent a marine animal sting or bite include: Swim near a lifeguard. Observe posted signs that may warn of danger from jellyfish or other hazardous marine life. ...

  16. Funnel-web spider bite

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/002844.htm Funnel-web spider bite To use the sharing features on ... the effects of a bite from the funnel-web spider. Male funnel-web spiders are more poisonous ...

  17. Air Force Officer Force Development, an Analysis and Future Issues

    National Research Council Canada - National Science Library

    Davidson, William T

    2004-01-01

    .... The intent is to identify any shortcomings in the construct, highlight processes requiring change, and assist the Air Force in building the road to a more robust, better educated, and visionary officer corps...

  18. Feasibility Analysis of an All Volunteer Armed Force in Turkey

    National Research Council Canada - National Science Library

    Alanc, Ozgun U

    2007-01-01

    .... Accordingly, this project report provides a Draft versus All Volunteer Forces (AVF) analysis for the Turkish Armed Forces, by evaluating the feasibility and the desirability of an AVF for the Turkish Armed Forces...

  19. Mosquito Bites are Bad!

    Centers for Disease Control (CDC) Podcasts

    2016-08-11

    In this podcast for kids, the Kidtastics talk about the dangers of mosquito bites and how to prevent getting them.  Created: 8/11/2016 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/11/2016.

  20. Rat bite fever.

    NARCIS (Netherlands)

    Gaastra, W.; Boot, R.G.A.; Ho, H.; Lipman, L.J.A.

    2009-01-01

    Rat bite fever (RBF) is a bacterial zoonosis for which two causal bacterial species have been identified: Streptobacillis moniliformis and Spirillum minus. Haverhill fever (HF) is a form of S. moniliformis infection believed to develop after ingestion of contaminated food or water. Here the

  1. Bug Bites and Stings

    Science.gov (United States)

    ... or sting. Handling Bee and Wasp Stings A bee will usually leave behind a stinger attached to a venom sac. Try to remove it as quickly as ... child has had an allergic reaction to a bee or wasp sting in the past, see your ... shape on its underbelly. The venom (a toxic substance) in a black widow bite ...

  2. Atomic Force Microscopy for Soil Analysis

    Science.gov (United States)

    gazze, andrea; doerr, stefan; dudley, ed; hallin, ingrid; matthews, peter; quinn, gerry; van keulen, geertje; francis, lewis

    2016-04-01

    Atomic Force Microscopy (AFM) is a high-resolution surface-sensitive technique, which provides 3-dimensional topographical information and material properties of both stiff and soft samples in their natural environments. Traditionally AFM has been applied to samples with low roughness: hence its use for soil analysis has been very limited so far. Here we report the optimization settings required for a standardization of high-resolution and artefact-free analysis of natural soil with AFM: soil immobilization, AFM probe selection, artefact recognition and minimization. Beyond topography, AFM can be used in a spectroscopic mode to evaluate nanomechanical properties, such as soil viscosity, stiffness, and deformation. In this regards, Bruker PeakForce-Quantitative NanoMechanical (QNM) AFM provides a fast and convenient way to extract physical properties from AFM force curves in real-time to obtain soil nanomechanical properties. Here we show for the first time the ability of AFM to describe the topography of natural soil at nanometre resolution, with observation of micro-components, such as clays, and of nano-structures, possibly of biotic origin, the visualization of which would prove difficult with other instrumentations. Finally, nanomechanical profiling has been applied to different wettability states in soil and the respective physical patterns are discussed.

  3. Força de mordida em crianças com mantenedor de espaço funcional na fase da dentadura mista inicial Bite force in children with functional space maintainer in early mixed dentition

    Directory of Open Access Journals (Sweden)

    Suzane Rodrigues Jacinto-Gonçalves

    2009-08-01

    Full Text Available OBJETIVO: verificar a influência do mantenedor de espaço funcional (MEF na força muscular em crianças com perda prematura de molares decíduos na fase inicial da dentadura mista (5,5 a 6,5 anos de idade com oclusão normal, considerando-se o padrão facial. MÉTODOS: a amostra foi constituída por dois grupos: Grupo MEF (n = 15, com perda precoce de pelo menos um molar decíduo; e Grupo Controle (n = 16. Determinou-se a força de mordida máxima (FM com um tubo transmissor pressurizado, conectado a um circuito eletrônico analógico/digital antes (t0, um mês (t1 e 6 meses (t6 após a instalação do mantenedor. O padrão facial foi determinado pelo índice de Jarabak (FHR. Os dados foram analisados pela estatística descritiva, análise de variância para medidas repetidas, teste t e correlação de Pearson. RESULTADOS:a FM foi significativamente menor em t0 e t1 para o Grupo MEF em relação ao Controle. Em t6 não houve diferença. Os dois grupos apresentaram a FM significativamente maior em t6, em relação a t0, mas o percentual de variação para o Grupo MEF foi significativamente maior. Os valores de FHR não se correlacionaram com a FM, não ocorrendo diferença entre os tipos faciais intragrupos. Os dolicofaciais do Grupo MEF apresentaram a FM significativamente menor que os do Grupo Controle, em t0 e t1, mas não em t6. CONCLUSÃO: o maior aumento na FM para o Grupo MEF após 6 meses foi favorecido pelo maior número de contatos oclusais, devido aos dentes artificiais, melhorando a função e recuperando a força muscular.AIM: To verify the influence of a functional space maintainer (FSM in muscle strength in children with premature loss of primary molars in early mixed dentition (5.5-6.5 years old with normal occlusion, considering the facial pattern. METHODS: The sample was distributed in: FSM Group (n = 15, with premature loss of at least one primary molar and a Control Group (n = 16. It was determined the maximal bite force (BF

  4. Food aroma affects bite size

    Directory of Open Access Journals (Sweden)

    de Wijk René A

    2012-03-01

    Full Text Available Abstract Background To evaluate the effect of food aroma on bite size, a semisolid vanilla custard dessert was delivered repeatedly into the mouth of test subjects using a pump while various concentrations of cream aroma were presented retronasally to the nose. Termination of the pump, which determined bite size, was controlled by the subject via a push button. Over 30 trials with 10 subjects, the custard was presented randomly either without an aroma, or with aromas presented below or near the detection threshold. Results Results for ten subjects (four females and six males, aged between 26 and 50 years, indicated that aroma intensity affected the size of the corresponding bite as well as that of subsequent bites. Higher aroma intensities resulted in significantly smaller sizes. Conclusions These results suggest that bite size control during eating is a highly dynamic process affected by the sensations experienced during the current and previous bites.

  5. The force pyramid: a spatial analysis of force application during virtual reality brain tumor resection.

    Science.gov (United States)

    Azarnoush, Hamed; Siar, Samaneh; Sawaya, Robin; Zhrani, Gmaan Al; Winkler-Schwartz, Alexander; Alotaibi, Fahad Eid; Bugdadi, Abdulgadir; Bajunaid, Khalid; Marwa, Ibrahim; Sabbagh, Abdulrahman Jafar; Del Maestro, Rolando F

    2017-07-01

    OBJECTIVE Virtual reality simulators allow development of novel methods to analyze neurosurgical performance. The concept of a force pyramid is introduced as a Tier 3 metric with the ability to provide visual and spatial analysis of 3D force application by any instrument used during simulated tumor resection. This study was designed to answer 3 questions: 1) Do study groups have distinct force pyramids? 2) Do handedness and ergonomics influence force pyramid structure? 3) Are force pyramids dependent on the visual and haptic characteristics of simulated tumors? METHODS Using a virtual reality simulator, NeuroVR (formerly NeuroTouch), ultrasonic aspirator force application was continually assessed during resection of simulated brain tumors by neurosurgeons, residents, and medical students. The participants performed simulated resections of 18 simulated brain tumors with different visual and haptic characteristics. The raw data, namely, coordinates of the instrument tip as well as contact force values, were collected by the simulator. To provide a visual and qualitative spatial analysis of forces, the authors created a graph, called a force pyramid, representing force sum along the z-coordinate for different xy coordinates of the tool tip. RESULTS Sixteen neurosurgeons, 15 residents, and 84 medical students participated in the study. Neurosurgeon, resident and medical student groups displayed easily distinguishable 3D "force pyramid fingerprints." Neurosurgeons had the lowest force pyramids, indicating application of the lowest forces, followed by resident and medical student groups. Handedness, ergonomics, and visual and haptic tumor characteristics resulted in distinct well-defined 3D force pyramid patterns. CONCLUSIONS Force pyramid fingerprints provide 3D spatial assessment displays of instrument force application during simulated tumor resection. Neurosurgeon force utilization and ergonomic data form a basis for understanding and modulating resident force

  6. Thermal creep force: analysis and application

    OpenAIRE

    Wolfe, David M.

    2016-01-01

    Approved for public release; distribution is unlimited The existence of two motive forces on a Crookes radiometer has complicated the investigation of either force independently. The thermal creep shear force, in particular, has been subject to differing interpretations of the direction in which it acts and its order of magnitude. A horizontal vane radiometer design is provided, which isolates the thermal creep shear force. The horizontal vane radiometer is explored through experiment, kin...

  7. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... your fingers and from your nails to your face and mouth. To help you stop biting your ... re inclined to bite may help solve the problem. Try to gradually stop biting your nails: Some ...

  8. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... skin, hair, and nails Skin dictionary Camp Discovery Good Skin Knowledge lesson plans and activities Video library ... biting. Replace the nail-biting habit with a good habit: When you feel like biting your nails, ...

  9. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... this safe, but awful-tasting formula discourages many people from biting their nails. Get regular manicures: Spending ... longer bite any of your nails. For some people, nail biting may be a sign of a ...

  10. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... biting can make the skin around your nails feel sore, and it can damage the tissue that ... biting habit with a good habit: When you feel like biting your nails, try playing with a ...

  11. Morphology of open bite.

    Science.gov (United States)

    Krey, Karl-Friedrich; Dannhauer, Karl-Heinz; Hierl, Thomas

    2015-05-01

    The purpose of this work was to define and illustrate the skeletal morphology of open-bite patients against the background of sagittal jaw relationships on the basis of lateral cephalograms. Lateral cephalograms of 197 untreated adults were analyzed in dental imaging software (Onyx Ceph 3™; Image Instruments, Chemnitz, Germany). Four groups were formed based on vertical (Index scores) and sagittal (individualized ANB values) parameters. Ninety-nine patients were defined as the control group due to their neutral sagittal and vertical relationships. The remaining patients were found by their vertical relationships to represent open-bite cases and were divided by their sagittal relationships into three study groups: neutral (Class I, n = 34), distal (Class II, n = 26), and mesial (Class III, n = 38). A geometric morphometric approach was used to analyze the x,y-coordinates of 28 skeletal landmarks on each cephalogram. Relative size was captured based on centroid size (CS). The shape-determining factors in the groups were compared by permutation testing after Procrustes transformation, and intergroup differences were visualized in the form of thin-plate splines. While size (CS) was significantly increased in the Class III group, the other two groups were not different from the control group. After Procrustes transformation, characteristic and invariably significant (p common that the mandibular ramus is compressed, but marked differences are seen in terms of vertical development of the maxilla. This differentiated view of open-bite cases should be taken into consideration during individual etiology assessment and treatment planning.

  12. Pigeon tick bite

    DEFF Research Database (Denmark)

    Rolla, G; Heffler, E; Boita, M

    2018-01-01

    Anaphylaxis is a serious systemic allergic reaction with rapid onset and potentially life-threatening. We report in detail a case of severe nocturnal anaphylaxis due to pigeon tick bite showing the diagnostic value of the extract and the recombinant allergen in the diagnostic procedures (basophil...... reagents. Because of the growing number of pigeons in Middle and Southern Europe cities, some cases of idiopathic anaphylaxis could potentially be caused by A. reflexus in those countries. The identification of pigeon ticks as a trigger of anaphylaxis would greatly improve medical care and advice...

  13. Esthetic correction in open bite

    Directory of Open Access Journals (Sweden)

    Swapnil Parlani

    2011-01-01

    Full Text Available Deleterious oral habits, which are persistent, can lead to poor esthetics of a beautiful face. Conventional treatment modalities for an open bite usually include orthodontic treatment and/or skeletal surgery. This article focuses on a different treatment modality for an anterior open bite.

  14. System analysis of force feedback microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Mario S. [CFMC/Dep. de Física, Universidade de Lisboa, Campo Grande, 1749-016 Lisboa (Portugal); Costa, Luca [European Synchrotron Radiation Facility, 6 rue Jules Horowitz BP 220, 38043 Grenoble Cedex (France); Université Joseph Fourier BP 53, 38041 Grenoble Cedex 9 (France); Chevrier, Joël [European Synchrotron Radiation Facility, 6 rue Jules Horowitz BP 220, 38043 Grenoble Cedex (France); Université Grenoble Alpes, Inst NEEL, F-38042 Grenoble (France); CNRS, Inst NEEL, F-38042 Grenoble (France); Comin, Fabio [European Synchrotron Radiation Facility, 6 rue Jules Horowitz BP 220, 38043 Grenoble Cedex (France)

    2014-02-07

    It was shown recently that the Force Feedback Microscope (FFM) can avoid the jump-to-contact in Atomic force Microscopy even when the cantilevers used are very soft, thus increasing force resolution. In this letter, we explore theoretical aspects of the associated real time control of the tip position. We take into account lever parameters such as the lever characteristics in its environment, spring constant, mass, dissipation coefficient, and the operating conditions such as controller gains and interaction force. We show how the controller parameters are determined so that the FFM functions at its best and estimate the bandwidth of the system under these conditions.

  15. System analysis of force feedback microscopy

    International Nuclear Information System (INIS)

    Rodrigues, Mario S.; Costa, Luca; Chevrier, Joël; Comin, Fabio

    2014-01-01

    It was shown recently that the Force Feedback Microscope (FFM) can avoid the jump-to-contact in Atomic force Microscopy even when the cantilevers used are very soft, thus increasing force resolution. In this letter, we explore theoretical aspects of the associated real time control of the tip position. We take into account lever parameters such as the lever characteristics in its environment, spring constant, mass, dissipation coefficient, and the operating conditions such as controller gains and interaction force. We show how the controller parameters are determined so that the FFM functions at its best and estimate the bandwidth of the system under these conditions

  16. Maximal bite force in young adults with temporomandibular disorders and bruxism Força de mordida máxima em adultos jovens com disfunção temporomandibular e bruxismo

    Directory of Open Access Journals (Sweden)

    Raquel Aparecida Pizolato

    2007-09-01

    Full Text Available Parafunctional habits, such as bruxism, are contributory factors for temporomandibular disorders (TMD. The aim of this study was to evaluate the maximal bite force (MBF in the presence of TMD and bruxism (TMDB in young adults. Twelve women (mean age 21.5 years and 7 men (mean age 22.4 years, composed the TMDB group. Ten healthy women and 9 men (mean age 21.4 and 22.4 years, respectively formed the control group. TMD symptoms were evaluated by a structured questionnaire and clinical signs/symptoms were evaluated during clinical examination. A visual analogical scale (VAS was applied for stress assessment. MBF was measured with a gnatodynamometer. The subjects were asked to bite 2 times with maximal effort, during 5 seconds, with a rest interval of about one minute. The highest values were considered. The data were analyzed with Shapiro-Wilks W-test, descriptive statistics, paired or unpaired t tests or Mann-Whitney tests when indicated, and Fisher's exact test (p Hábitos parafuncionais, como o bruxismo, podem contribuir para a disfunção temporomandibular (DTM. O objetivo deste trabalho foi avaliar a força de mordida máxima (FMM na presença de DTM e bruxismo (DTMB em adultos jovens. Doze mulheres (idade média de 21,5 anos e sete homens (idade média 22,4 anos compuseram o grupo DTMB. O grupo controle foi formado por 10 mulheres e 9 homens saudáveis, com idades médias de 21,4 e 22,4 anos, respectivamente. Os sintomas de DTM foram avaliados com um questionário estruturado, e os sinais/sintomas clínicos foram avaliados no exame clínico. Para avaliar estresse, utilizou-se a escala analógica visual (VAS. A FMM foi mensurada com gnatodinamômetro, e o participante foi orientado a morder com o máximo esforço durante 5 segundos, duas vezes, com intervalo de aproximadamente 1 minuto, considerando-se os valores máximos. Os dados foram analisados pelo teste de Shapiro-Wilks, estatística descritiva, teste t pareado e independente, Mann

  17. ANALYSIS OF THE MAGNETIZED FRICTION FORCE.

    Energy Technology Data Exchange (ETDEWEB)

    FEDOTOV, A.V.; BRUHWILER, D.L.; SIDORIN, A.O.

    2006-05-29

    A comprehensive examination of theoretical models for the friction force, in use by the electron cooling community, was performed. Here, they present their insights about the models gained as a result of comparison between the friction force formulas and direct numerical simulations, as well as studies of the cooling process as a whole.

  18. A qualitative investigation of the perceptions of female dog-bite victims and implications for the prevention of dog bites.

    Science.gov (United States)

    Westgarth, Carri; Watkins, Francine

    2015-01-01

    Preventing dog bites is an increasingly important public health and political issue with implications for both human and animal health and welfare. Expert opinion is that most bites are preventable. Intervention materials have been designed to educate people on how to assess the body language of dogs, evaluate risk, and take appropriate action. The effectiveness of this approach is rarely evaluated and the incidence of dog bites is thought to be increasing. Is the traditional approach to dog bite prevention working as well as it should? In this novel, small scale qualitative study, the perceptions of victims regarding their dog bite experience were explored in-depth. The study recruited 8 female participants who had been bitten by a dog in the past 5 years. In-depth, one-to-one interviews were conducted, transcribed, and analyzed using thematic analysis. The findings indicate that dog bites may not be as easily preventable as previously presumed, and that education about dog body language may not prevent some types of dog bites. The reasons participants were bitten were multifaceted and complex. In some cases, there was no interaction with the dog before the bite so there was no opportunity to assess the situation and modify behavior around the dog accordingly. Identifying who was to blame, and had responsibility for preventing the bite, was straightforward for the participants in hindsight. Those bitten blamed themselves and/or the dog owner, but not the dog. Most participants already felt they had a theoretical knowledge that would allow them to recognize dog aggression before the dog bite, yet participants, especially those who worked regularly with dogs, routinely believed, "it would not happen to me." We also identified an attitude that bites were "just one of those things," which could also be a barrier prevention initiatives. Rather than being special to the human-canine relationship, the attitudes discovered mirror those found in other areas of injury

  19. Large amplitude forced vibration analysis of cross-beam system ...

    African Journals Online (AJOL)

    Large amplitude forced vibration behaviour of cross-beam system under harmonic excitation is studied, incorporating the effect of geometric non-linearity. The forced vibration analysis is carried out in an indirect way, in which the dynamic system is assumed to satisfy the force equilibrium condition at peak load value, thus ...

  20. Extended Analysis of the Casimir Force

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2014-04-01

    Full Text Available There are several arguments for the conventional form of the Zero Point Energy fre- quency spectrum to be put in doubt. It has thus to be revised in to that of a self-consistent system in statistical equilibrium where the total energy de nsity and the equivalent pres- sure become finite. An extended form of the Casimir force is th ereby proposed to be used as a tool for determining the local magnitude of the same pressure. This can be done in terms of measurements on the force between a pair po lished plane plates consisting of different metals, the plates having very small or zero air gaps. T his corre- sponds to the largest possible Casimir force. Even then, the re may arise problems with other adhering forces, possibly to be clarified in further experiments.

  1. Shrieking, Biting, and Licking

    Directory of Open Access Journals (Sweden)

    Sarah Stang

    2018-01-01

    Full Text Available This article examines examples of the monstrous-feminine in the form of abject female monsters in a selection of critically acclaimed and commercially successful video games. Various female monsters from CD Projekt RED’s The Witcher series (2007-2015, and Santa Monica Studio’s God of War series (2005-2013 are considered as examples of the abject monstrous-feminine which fall into a long tradition in horror media of making the female body and body movements into something horrific and repulsive. These female monsters use shrieking, biting, licking, and spreading disease as weapons against the male protagonist, who must slay them to restore symbolic order and progress in the games.

  2. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... gloves to prevent biting. Replace the nail-biting habit with a good habit: When you feel like biting your nails, try ... recommend taking a gradual approach to break the habit. Try to stop biting one set of nails, ...

  3. Time series analysis and mortality model of dog bite victims presented for treatment at a referral clinic for rabies exposure in Monrovia, Liberia, 2010-2013.

    Science.gov (United States)

    Olarinmoye, Ayodeji O; Ojo, Johnson F; Fasunla, Ayotunde J; Ishola, Olayinka O; Dakinah, Fahnboah G; Mulbah, Charles K; Al-Hezaimi, Khalid; Olugasa, Babasola O

    2017-08-01

    We developed time trend model, determined treatment outcome and estimated annual human deaths among dog bite victims (DBVs) from 2010 to 2013 in Monrovia, Liberia. Data obtained from clinic records included victim's age, gender and site of bite marks, site name of residence of rabies-exposed patients, promptness of care sought, initial treatment and post-exposure-prophylaxis (PEP) compliance. We computed DBV time-trend plot, seasonal index and year 2014 case forecast. Associated annual human death (AHD) was estimated using a standardized decision tree model. Of the 775 DBVs enlisted, care seeking time was within 24h of injury in 328 (42.32%) DBVs. Victim's residential location, site of bite mark, and time dependent variables were significantly associated with treatment outcome (prabies implied urgent need for policy formulation on national programme for rabies prevention in Liberia. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Mechanics of biting in great white and sandtiger sharks.

    Science.gov (United States)

    Ferrara, T L; Clausen, P; Huber, D R; McHenry, C R; Peddemors, V; Wroe, S

    2011-02-03

    Although a strong correlation between jaw mechanics and prey selection has been demonstrated in bony fishes (Osteichthyes), how jaw mechanics influence feeding performance in cartilaginous fishes (Chondrichthyes) remains unknown. Hence, tooth shape has been regarded as a primary predictor of feeding behavior in sharks. Here we apply Finite Element Analysis (FEA) to examine form and function in the jaws of two threatened shark species, the great white (Carcharodon carcharias) and the sandtiger (Carcharias taurus). These species possess characteristic tooth shapes believed to reflect dietary preferences. We show that the jaws of sandtigers and great whites are adapted for rapid closure and generation of maximum bite force, respectively, and that these functional differences are consistent with diet and dentition. Our results suggest that in both taxa, insertion of jaw adductor muscles on a central tendon functions to straighten and sustain muscle fibers to nearly orthogonal insertion angles as the mouth opens. We argue that this jaw muscle arrangement allows high bite forces to be maintained across a wider range of gape angles than observed in mammalian models. Finally, our data suggest that the jaws of sub-adult great whites are mechanically vulnerable when handling large prey. In addition to ontogenetic changes in dentition, further mineralization of the jaws may be required to effectively feed on marine mammals. Our study is the first comparative FEA of the jaws for any fish species. Results highlight the potential of FEA for testing previously intractable questions regarding feeding mechanisms in sharks and other vertebrates. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. Identifying Insect Bites and Stings

    Science.gov (United States)

    ... Editor & Contributors Sponsors Sponsorship Opportunities Spread the Word Shop AAP Find a Pediatrician Health Issues Conditions Abdominal ... birdbaths) and are attracted by bright colors and sweat. Bites result in stinging sensation followed by a ...

  6. Tips to Prevent Mosquito Bites

    Science.gov (United States)

    ... discourage mosquitoes, ticks and other biting insects from landing on you. Here are tips for other preventive ... CDC Mosquito Control Methods - NPIC Exit Top of Page Contact Us to ask a question, provide feedback, ...

  7. Air Force Pilot Retention: An Economic Analysis

    Science.gov (United States)

    1993-01-01

    Force impacts retention. Within the field of labor economics , an alternative labor market theory has developed which contrasts with typical competitive...this section. 60 NOTES ON CHAPTER III 1 Sherwin Rosen. "The Theory of Equalizing Differences," _Handboof•f Labor Economics , Volume 1, (New York

  8. Air Force Materiel Command Reorganization Analysis

    Science.gov (United States)

    2012-01-01

    proper leadership, training, force development, and execution of the sustainment processes 5. a culture of collaboration whereby each of the many...organization and the pattern of organizational communication. The “principles of organization” have been relativized by a stream of criticism, and...how dramatic perfor- mance improvements can be achieved by redesigning business processes, organization, and culture . The authors define reengineering

  9. Localization and force analysis at the single virus particle level using atomic force microscopy

    International Nuclear Information System (INIS)

    Liu, Chih-Hao; Horng, Jim-Tong; Chang, Jeng-Shian; Hsieh, Chung-Fan; Tseng, You-Chen; Lin, Shiming

    2012-01-01

    Highlights: ► Localization of single virus particle. ► Force measurements. ► Force mapping. -- Abstract: Atomic force microscopy (AFM) is a vital instrument in nanobiotechnology. In this study, we developed a method that enables AFM to simultaneously measure specific unbinding force and map the viral glycoprotein at the single virus particle level. The average diameter of virus particles from AFM images and the specificity between the viral surface antigen and antibody probe were integrated to design a three-stage method that sets the measuring area to a single virus particle before obtaining the force measurements, where the influenza virus was used as the object of measurements. Based on the purposed method and performed analysis, several findings can be derived from the results. The mean unbinding force of a single virus particle can be quantified, and no significant difference exists in this value among virus particles. Furthermore, the repeatability of the proposed method is demonstrated. The force mapping images reveal that the distributions of surface viral antigens recognized by antibody probe were dispersed on the whole surface of individual virus particles under the proposed method and experimental criteria; meanwhile, the binding probabilities are similar among particles. This approach can be easily applied to most AFM systems without specific components or configurations. These results help understand the force-based analysis at the single virus particle level, and therefore, can reinforce the capability of AFM to investigate a specific type of viral surface protein and its distributions.

  10. Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

    Science.gov (United States)

    Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

    2015-12-01

    In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3

  11. The biting performance of Homo sapiens and Homo heidelbergensis.

    Science.gov (United States)

    Godinho, Ricardo Miguel; Fitton, Laura C; Toro-Ibacache, Viviana; Stringer, Chris B; Lacruz, Rodrigo S; Bromage, Timothy G; O'Higgins, Paul

    2018-05-01

    Modern humans have smaller faces relative to Middle and Late Pleistocene members of the genus Homo. While facial reduction and differences in shape have been shown to increase biting efficiency in Homo sapiens relative to these hominins, facial size reduction has also been said to decrease our ability to resist masticatory loads. This study compares crania of Homo heidelbergensis and H. sapiens with respect to mechanical advantages of masticatory muscles, force production efficiency, strains experienced by the cranium and modes of deformation during simulated biting. Analyses utilize X-ray computed tomography (CT) scan-based 3D models of a recent modern human and two H. heidelbergensis. While having muscles of similar cross-sectional area to H. heidelbergensis, our results confirm that the modern human masticatory system is more efficient at converting muscle forces into bite forces. Thus, it can produce higher bite forces than Broken Hill for equal muscle input forces. This difference is the result of alterations in relative in and out-lever arm lengths associated with well-known differences in midfacial prognathism. Apparently at odds with this increased efficiency is the finding that the modern human cranium deforms more, resulting in greater strain magnitudes than Broken Hill when biting at the equivalent tooth. Hence, the facial reduction that characterizes modern humans may not have evolved as a result of selection for force production efficiency. These findings provide further evidence for a degree of uncoupling between form and function in the masticatory system of modern humans. This may reflect the impact of food preparation technologies. These data also support previous suggestions that differences in bite force production efficiency can be considered a spandrel, primarily driven by the midfacial reduction in H. sapiens that occurred for other reasons. Midfacial reduction plausibly resulted in a number of other significant changes in morphology, such

  12. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Tips to prevent and treat bug bites Although most bug bites are harmless, some can spread dangerous ... one’s greatest efforts, bug bites still happen. Fortunately, most bug bites and stings can be safely treated ...

  13. Localization and force analysis at the single virus particle level using atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chih-Hao [Institute of Applied Mechanics, Nation Taiwan University, Roosevelt Road, Taipei 10617, Taiwan (China); Horng, Jim-Tong [Department of Biochemistry, Chang Gung University, 259 Wen-Hwa First Road, Kweishan, Taoyuan 333, Taiwan (China); Chang, Jeng-Shian [Institute of Applied Mechanics, Nation Taiwan University, Roosevelt Road, Taipei 10617, Taiwan (China); Hsieh, Chung-Fan [Graduate Institute of Biomedical Sciences, Chang Gung University, Kweishan, Taoyuan 333, Taiwan (China); Tseng, You-Chen [Institute of Applied Mechanics, Nation Taiwan University, Roosevelt Road, Taipei 10617, Taiwan (China); Lin, Shiming, E-mail: til@ntu.edu.tw [Institute of Applied Mechanics, Nation Taiwan University, Roosevelt Road, Taipei 10617, Taiwan (China); Center for Optoelectronic Biomedicine, College of Medicine, Nation Taiwan University, 1-1 Jen-Ai Road, Taipei 10051, Taiwan (China)

    2012-01-06

    Highlights: Black-Right-Pointing-Pointer Localization of single virus particle. Black-Right-Pointing-Pointer Force measurements. Black-Right-Pointing-Pointer Force mapping. -- Abstract: Atomic force microscopy (AFM) is a vital instrument in nanobiotechnology. In this study, we developed a method that enables AFM to simultaneously measure specific unbinding force and map the viral glycoprotein at the single virus particle level. The average diameter of virus particles from AFM images and the specificity between the viral surface antigen and antibody probe were integrated to design a three-stage method that sets the measuring area to a single virus particle before obtaining the force measurements, where the influenza virus was used as the object of measurements. Based on the purposed method and performed analysis, several findings can be derived from the results. The mean unbinding force of a single virus particle can be quantified, and no significant difference exists in this value among virus particles. Furthermore, the repeatability of the proposed method is demonstrated. The force mapping images reveal that the distributions of surface viral antigens recognized by antibody probe were dispersed on the whole surface of individual virus particles under the proposed method and experimental criteria; meanwhile, the binding probabilities are similar among particles. This approach can be easily applied to most AFM systems without specific components or configurations. These results help understand the force-based analysis at the single virus particle level, and therefore, can reinforce the capability of AFM to investigate a specific type of viral surface protein and its distributions.

  14. Injurious tail biting in pigs

    DEFF Research Database (Denmark)

    D'Eath, R.B.; Amott, G.; Turner, S. P.

    2014-01-01

    not allow tail docking at all. Against this background, using a novel approach focusing on research where tail injuries were quantified, we review the measures that can be used to control tail biting in pigs without tail docking. Using this strict criterion, there was good evidence that manipulable...... substrates and feeder space affect damaging tail biting. Only epidemiological evidence was available for effects of temperature and season, and the effect of stocking density was unclear. Studies suggest that group size has little effect, and the effects of nutrition, disease and breed require further...... underlying processes of tail biting. A quantitative comparison of the efficacy of different methods of provision of manipulable materials, and a review of current practices in countries and assurance schemes where tail docking is banned, both suggest that daily provision of small quantities of destructible...

  15. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... nails, or even an entire hand. The goal is to get to the point where you no longer bite any of your nails. For some people, nail biting may be a sign of a more serious psychological ...

  16. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... biting your nails Nail biting typically begins in childhood and can continue through adulthood, and the side ... set of nails, such as your thumb nails, first. When that’s successful, eliminate your pinky nails, pointer ...

  17. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources ... Try to gradually stop biting your nails: Some doctors recommend taking a gradual approach to break the habit. Try to stop biting ...

  18. System of gait analysis based on ground reaction force assessment

    Directory of Open Access Journals (Sweden)

    František Vaverka

    2015-12-01

    Full Text Available Background: Biomechanical analysis of gait employs various methods used in kinematic and kinetic analysis, EMG, and others. One of the most frequently used methods is kinetic analysis based on the assessment of the ground reaction forces (GRF recorded on two force plates. Objective: The aim of the study was to present a method of gait analysis based on the assessment of the GRF recorded during the stance phase of two steps. Methods: The GRF recorded with a force plate on one leg during stance phase has three components acting in directions: Fx - mediolateral, Fy - anteroposterior, and Fz - vertical. A custom-written MATLAB script was used for gait analysis in this study. This software displays instantaneous force data for both legs as Fx(t, Fy(t and Fz(t curves, automatically determines the extremes of functions and sets the visual markers defining the individual points of interest. Positions of these markers can be easily adjusted by the rater, which may be necessary if the GRF has an atypical pattern. The analysis is fully automated and analyzing one trial takes only 1-2 minutes. Results: The method allows quantification of temporal variables of the extremes of the Fx(t, Fy(t, Fz(t functions, durations of the braking and propulsive phase, duration of the double support phase, the magnitudes of reaction forces in extremes of measured functions, impulses of force, and indices of symmetry. The analysis results in a standardized set of 78 variables (temporal, force, indices of symmetry which can serve as a basis for further research and diagnostics. Conclusions: The resulting set of variable offers a wide choice for selecting a specific group of variables with consideration to a particular research topic. The advantage of this method is the standardization of the GRF analysis, low time requirements allowing rapid analysis of a large number of trials in a short time, and comparability of the variables obtained during different research measurements.

  19. Rat bite fever without fever.

    Science.gov (United States)

    Stehle, P; Dubuis, O; So, A; Dudler, J

    2003-09-01

    Rat bite fever is a rarely reported acute febrile bacterial illness caused by Streptobacillus moniliformis or Spirillum minus following a rat bite. It is classically characterised by abrupt onset of fever with rigors, myalgias, headache, and the appearance of a generalised maculopapular petechial skin rash. Polyarthritis complicates the course of the disease in up to 50% of infected patients, and numerous hurdles can make the diagnosis particularly difficult in the absence of fever or rash, as in the present case. A high degree of awareness is necessary to make the correct diagnosis in such cases. Diagnosis has important prognostic implications as the disease is potentially lethal, but easily treatable.

  20. Analysis of DNA interactions using single-molecule force spectroscopy.

    Science.gov (United States)

    Ritzefeld, Markus; Walhorn, Volker; Anselmetti, Dario; Sewald, Norbert

    2013-06-01

    Protein-DNA interactions are involved in many biochemical pathways and determine the fate of the corresponding cell. Qualitative and quantitative investigations on these recognition and binding processes are of key importance for an improved understanding of biochemical processes and also for systems biology. This review article focusses on atomic force microscopy (AFM)-based single-molecule force spectroscopy and its application to the quantification of forces and binding mechanisms that lead to the formation of protein-DNA complexes. AFM and dynamic force spectroscopy are exciting tools that allow for quantitative analysis of biomolecular interactions. Besides an overview on the method and the most important immobilization approaches, the physical basics of the data evaluation is described. Recent applications of AFM-based force spectroscopy to investigate DNA intercalation, complexes involving DNA aptamers and peptide- and protein-DNA interactions are given.

  1. An unusual complication of snake bite

    Directory of Open Access Journals (Sweden)

    Mary Grace

    2014-01-01

    Full Text Available Anterior pituitary hypofunction is a well-known complication following snake bite. However, central diabetes insipidus as a complication of snake bite is only rarely reported in the literature. We are reporting a case of central diabetes insipidus, which developed as sequelae to viper bite.

  2. 21 CFR 882.5070 - Bite block.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bite block. 882.5070 Section 882.5070 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5070 Bite block. (a) Identification. A bite block...

  3. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... of hangnails, or other triggers, such as boredom, stress, or anxiety. By figuring out what causes you to bite your nails, you can figure out how to avoid these situations and develop a plan to stop. Just knowing when you’re inclined to bite may help solve the problem. Try to gradually stop biting ...

  4. Recent Advances in the Method of Forces: Integrated Force Method of Structural Analysis

    Science.gov (United States)

    Patnaik, Surya N.; Coroneos, Rula M.; Hopkins, Dale A.

    1998-01-01

    Stress that can be induced in an elastic continuum can be determined directly through the simultaneous application of the equilibrium equations and the compatibility conditions. In the literature, this direct stress formulation is referred to as the integrated force method. This method, which uses forces as the primary unknowns, complements the popular equilibrium-based stiffness method, which considers displacements as the unknowns. The integrated force method produces accurate stress, displacement, and frequency results even for modest finite element models. This version of the force method should be developed as an alternative to the stiffness method because the latter method, which has been researched for the past several decades, may have entered its developmental plateau. Stress plays a primary role in the development of aerospace and other products, and its analysis is difficult. Therefore, it is advisable to use both methods to calculate stress and eliminate errors through comparison. This paper examines the role of the integrated force method in analysis, animation and design.

  5. Vertical, radial and drag force analysis of superconducting magnetic bearings

    International Nuclear Information System (INIS)

    Cansiz, Ahmet

    2009-01-01

    The behavior of the force between a permanent magnet (PM) and a high temperature superconductor (HTS) was tested with the frozen-image model based on flux pinning. It was found that the associated dipole moment assumptions of the method of the frozen image underestimate the force somewhat; thus a quadrupole moment analysis is proposed. The radial and drag forces associated with the rotation of the PM levitated above the HTS were measured by using a force transducer and by means of a cantilevered beam technique. The radial force was found not to be dependent on the radial direction, and the least radial force was found to be periodic with an angular displacement during the slow rotation of the PM relative to the HTS. The periodicity behavior of the force is attributed to the geometric eccentricity from the magnetization distribution of the PM and HTS. The drag force associated with the torsional stiffness of the levitated PM during the low and high rotational speeds was incorporated with the data from the literature.

  6. Mosquito Bite Prevention For Travelers

    Science.gov (United States)

    ... bites. Here’s how: Keep mosquitoes out of your hotel room or lodging Š Choose a hotel or lodging with air conditioning or screens on ... percentages of active ingredient provide longer protection Some brand name examples* (Insect repellents may be sold under ...

  7. Treatment of hyperdivergent growth pattern and anterior open bite with posterior metallic bite planes.

    Science.gov (United States)

    Ciavarella, Domenico; Lo Russo, Lucio; Nichelini, Jeffrey; Mastrovincenzo, Mario; Barbato, Ersilia; Laurenziello, Michele; Montaruli, Graziano; Lo Muzio, Lorenzo

    2017-12-01

    In the present paper, the authors analyze the effect of the "Swallowing Occlusal Contact Intercept Appliance" (SOCIA) in treatment of children with hyperdivergent Class II malocclusion. This functional appliance has no intra-oral anchorage, but induces a continuous periodontal, muscular, and articular stimulation. Twenty-six patients with hyperdivergent growth and class II malocclusion were selected and treated with SOCIA appliance. Cephalometric analysis was performed before treatment (T1) and immediately after the treatment (T2). After 24 months treatment authors observed a modification of maxillary growth with a reduction of the divergence with an increase of the posterior facial height, a modification of condylar inclination and forward position of the a hyoid. No modifications was observed about the ANB angle. After treatment the open bite was resolved with a reduction of the inclination of the upper incisors. SOCIA is a reliable functional appliance in growing age patients with a hyperdivergent pattern growth, anterior open bite and class II molar malocclusion.

  8. Transient analysis of blowdown thrust force under PWR LOCA

    International Nuclear Information System (INIS)

    Yano, Toshikazu; Miyazaki, Noriyuki; Isozaki, Toshikuni

    1982-10-01

    The analytical results of blowdown characteristics and thrust forces were compared with the experiments, which were performed as pipe whip and jet discharge tests under the PWR LOCA conditions. The blowdown thrust forces obtained by Navier-Stokes momentum equation about a single-phase, homogeneous and separated two-phase flow, assuming critical pressure at the exit if a critical flow condition was satisfied. The following results are obtained. (1) The node-junction method is useful for both the analyses of the blowdown thrust force and of the water hammer phenomena. (2) The Henry-Fauske model for subcooled critical flow is effective for the analysis of the maximum thrust force under the PWR LOCA conditions. The jet thrust parameter of the analysis and experiment is equal to 1.08. (3) The thrust parameter of saturated blowdown has the same one with the value under pressurized condition when the stagnant pressure is chosen as the saturated one. (4) The dominant terms of the blowdown thrust force in the momentum equation are the pressure and momentum terms except that the acceleration term has large contribution only just after the break. (5) The blowdown thrust force in the analysis greatly depends on the selection of the exit pressure. (author)

  9. K-9 Police Dog Bite

    Directory of Open Access Journals (Sweden)

    Vy Han

    2017-01-01

    Full Text Available History of present illness: A 30-year-old male who was brought into the emergency department (ED by police officers after being bitten in the right lower extremity by a police German Shepard after attempting to flee authorities on foot. The patient stated that the dog immediately bit down on his right calf and proceeded to violently shake its head side to side without releasing its grip until police manually pulled the dog off of him. Upon arrival to the ED, he was tachycardic in the 120’s, complaining of severe, throbbing, sharp pain in the right lower extremity, and was neurovascular intact on exam. Significant findings: The photograph is of the anterior compartment of the right lower leg demonstrating multiple deep lacerations with exposed and torn muscle. X-ray showed no foreign body. Discussion: Police dog bites should be treated more cautiously than typical dog bites because these highly-trained dogs are generally larger breeds which are taught to subdue suspects with a bite-and-hold technique rather than bite and release. This can lead to extensive crush injuries, fractures, large caliber lacerations with associated muscle tissue injury and/or severe neurovascular compromise.1 Hence, police dog bites often require provocative diagnostic testing, specialist consultation for possible operative repair, and aggressive irrigation and ultimately admission for intravenous antibiotics.1 This patient’s wound was aggressively irrigated and evaluated by plastic surgery in the ED. He was ultimately admitted for intravenous antibiotics, pain control, wound care, and healing by secondary intention.

  10. Effect of ebastine on mosquito bites.

    Science.gov (United States)

    Reunala, T; Brummer-Korvenkontio, H; Petman, L; Palosuo, T; Sarna, S

    1997-07-01

    Mosquito bites usually cause wealing and delayed bite papules. Cetirizine decreases wealing, bite papules and pruritus but the effect of other antihistamines on mosquito bites is unknown. We studied the effect of ebastine in 30 mosquito bite-sensitive adult subjects. Ebastine 10 mg or 20 mg and placebo were given for 4 days in a cross-over fashion. Aedes aegypti bites were given on forearms. The size of the bite lesions and pruritus (visual analogue score) were measured at 15 min, 2, 6, and 24 h after the bites. Twenty-five subjects were evaluable in the study. At 15 min ebastine decreased significantly the size of the bite lesion (p = 0.0017) and pruritus (ptime points were compiled the size of the bite lesion and pruritus score decreased significantly. Sedation occurred during ebastine treatment in 6 (21%) and during placebo treatment in 2 (7%) subjects. The present results show that prophylactically given ebastine is effective against immediate mosquito bite symptoms.

  11. Application of Stochastic Sensitivity Analysis to Integrated Force Method

    Directory of Open Access Journals (Sweden)

    X. F. Wei

    2012-01-01

    Full Text Available As a new formulation in structural analysis, Integrated Force Method has been successfully applied to many structures for civil, mechanical, and aerospace engineering due to the accurate estimate of forces in computation. Right now, it is being further extended to the probabilistic domain. For the assessment of uncertainty effect in system optimization and identification, the probabilistic sensitivity analysis of IFM was further investigated in this study. A set of stochastic sensitivity analysis formulation of Integrated Force Method was developed using the perturbation method. Numerical examples are presented to illustrate its application. Its efficiency and accuracy were also substantiated with direct Monte Carlo simulations and the reliability-based sensitivity method. The numerical algorithm was shown to be readily adaptable to the existing program since the models of stochastic finite element and stochastic design sensitivity are almost identical.

  12. Force analysis of magnetic bearings with power-saving controls

    International Nuclear Information System (INIS)

    Johnson, D.; Brown, G.V.; Inman, D.J.

    1992-01-01

    Most magnetic bearing control schemes use a bias current with a superimposed control current to linearize the relationship between the control current and the force it delivers. For most operating conditions, the existence of the bias current requires more power than alternative methods that do not use conventional bias. Two such methods are examined which diminish or eliminate bias current. In the typical bias control scheme it is found that for a harmonic control force command into a voltage limited transconductance amplifier, the desired force output is obtained only up to certain combinations of force amplitude and frequency. Above these values, the force amplitude is reduced and a phase lag occurs. The power saving alternative control schemes typically exhibit such deficiencies at even lower command frequencies and amplitudes. To assess the severity of these effects, a time history analysis of the force output is performed for the bias method and the alternative methods. Results of the analysis show that the alternative approaches may be viable. The various control methods examined were mathematically modeled using nondimensionalized variables to facilitate comparison of the various methods

  13. Theoretical analysis of steady state operating forces in control valves

    Directory of Open Access Journals (Sweden)

    Basavaraj Hubballi

    2018-01-01

    Full Text Available The controlling components, such as valves are used to regulate controlled fluid power. It is not always possible to calculate valve forces accurately, and with some types of valves even the existence of certain types of forces cannot be predicted with certainty. In many cases, however, the analysis can be made fairly completely and accurately. The assumption of steady state conditions is valid for the valve alone, but transient effects in the rest of the system may be large. These effects are particularly important with regard to the instability of valves, where the system may react on the valve in such a way as to make it squeal or oscillate, sometimes with large amplitude. The origin of the steady state flow force understood from a brief qualitative explanation. The following paper will summarize much of what is known about valve forces in the spool type controlling element.

  14. Forced Vibration Analysis for a FGPM Cylindrical Shell

    Directory of Open Access Journals (Sweden)

    Hong-Liang Dai

    2013-01-01

    Full Text Available This article presents an analytical study for forced vibration of a cylindrical shell which is composed of a functionally graded piezoelectric material (FGPM. The cylindrical shell is assumed to have two-constituent material distributions through the thickness of the structure, and material properties of the cylindrical shell are assumed to vary according to a power-law distribution in terms of the volume fractions for constituent materials, the exact solution for the forced vibration problem is presented. Numerical results are presented to show the effect of electric excitation, thermal load, mechanical load and volume exponent on the static and force vibration of the FGPM cylindrical shell. The goal of this investigation is to optimize the FGPM cylindrical shell in engineering, also the present solution can be used in the forced vibration analysis of cylindrical smart elements.

  15. Sexual Dimorphism in Bite Performance Drives Morphological Variation in Chameleons

    Science.gov (United States)

    da Silva, Jessica M.; Herrel, Anthony; Measey, G. John; Tolley, Krystal A.

    2014-01-01

    Phenotypic performance in different environments is central to understanding the evolutionary and ecological processes that drive adaptive divergence and, ultimately, speciation. Because habitat structure can affect an animal’s foraging behaviour, anti-predator defences, and communication behaviour, it can influence both natural and sexual selection pressures. These selective pressures, in turn, act upon morphological traits to maximize an animal’s performance. For performance traits involved in both social and ecological activities, such as bite force, natural and sexual selection often interact in complex ways, providing an opportunity to understand the adaptive significance of morphological variation with respect to habitat. Dwarf chameleons within the Bradypodion melanocephalum-Bradypodion thamnobates species complex have multiple phenotypic forms, each with a specific head morphology that could reflect its use of either open- or closed-canopy habitats. To determine whether these morphological differences represent adaptations to their habitats, we tested for differences in both absolute and relative bite performance. Only absolute differences were found between forms, with the closed-canopy forms biting harder than their open-canopy counterparts. In contrast, sexual dimorphism was found for both absolute and relative bite force, but the relative differences were limited to the closed-canopy forms. These results indicate that both natural and sexual selection are acting within both habitat types, but to varying degrees. Sexual selection seems to be the predominant force within the closed-canopy habitats, which are more protected from aerial predators, enabling chameleons to invest more in ornamentation for communication. In contrast, natural selection is likely to be the predominant force in the open-canopy habitats, inhibiting the development of conspicuous secondary sexual characteristics and, ultimately, enforcing their overall diminutive body size and

  16. Sexual dimorphism in bite performance drives morphological variation in chameleons.

    Directory of Open Access Journals (Sweden)

    Jessica M da Silva

    Full Text Available Phenotypic performance in different environments is central to understanding the evolutionary and ecological processes that drive adaptive divergence and, ultimately, speciation. Because habitat structure can affect an animal's foraging behaviour, anti-predator defences, and communication behaviour, it can influence both natural and sexual selection pressures. These selective pressures, in turn, act upon morphological traits to maximize an animal's performance. For performance traits involved in both social and ecological activities, such as bite force, natural and sexual selection often interact in complex ways, providing an opportunity to understand the adaptive significance of morphological variation with respect to habitat. Dwarf chameleons within the Bradypodion melanocephalum-Bradypodion thamnobates species complex have multiple phenotypic forms, each with a specific head morphology that could reflect its use of either open- or closed-canopy habitats. To determine whether these morphological differences represent adaptations to their habitats, we tested for differences in both absolute and relative bite performance. Only absolute differences were found between forms, with the closed-canopy forms biting harder than their open-canopy counterparts. In contrast, sexual dimorphism was found for both absolute and relative bite force, but the relative differences were limited to the closed-canopy forms. These results indicate that both natural and sexual selection are acting within both habitat types, but to varying degrees. Sexual selection seems to be the predominant force within the closed-canopy habitats, which are more protected from aerial predators, enabling chameleons to invest more in ornamentation for communication. In contrast, natural selection is likely to be the predominant force in the open-canopy habitats, inhibiting the development of conspicuous secondary sexual characteristics and, ultimately, enforcing their overall diminutive

  17. Sexual dimorphism in bite performance drives morphological variation in chameleons.

    Science.gov (United States)

    da Silva, Jessica M; Herrel, Anthony; Measey, G John; Tolley, Krystal A

    2014-01-01

    Phenotypic performance in different environments is central to understanding the evolutionary and ecological processes that drive adaptive divergence and, ultimately, speciation. Because habitat structure can affect an animal's foraging behaviour, anti-predator defences, and communication behaviour, it can influence both natural and sexual selection pressures. These selective pressures, in turn, act upon morphological traits to maximize an animal's performance. For performance traits involved in both social and ecological activities, such as bite force, natural and sexual selection often interact in complex ways, providing an opportunity to understand the adaptive significance of morphological variation with respect to habitat. Dwarf chameleons within the Bradypodion melanocephalum-Bradypodion thamnobates species complex have multiple phenotypic forms, each with a specific head morphology that could reflect its use of either open- or closed-canopy habitats. To determine whether these morphological differences represent adaptations to their habitats, we tested for differences in both absolute and relative bite performance. Only absolute differences were found between forms, with the closed-canopy forms biting harder than their open-canopy counterparts. In contrast, sexual dimorphism was found for both absolute and relative bite force, but the relative differences were limited to the closed-canopy forms. These results indicate that both natural and sexual selection are acting within both habitat types, but to varying degrees. Sexual selection seems to be the predominant force within the closed-canopy habitats, which are more protected from aerial predators, enabling chameleons to invest more in ornamentation for communication. In contrast, natural selection is likely to be the predominant force in the open-canopy habitats, inhibiting the development of conspicuous secondary sexual characteristics and, ultimately, enforcing their overall diminutive body size and

  18. Analysis of the Single Toggle Jaw Crusher Force Transmission Characteristics

    Directory of Open Access Journals (Sweden)

    Moses Frank Oduori

    2016-01-01

    Full Text Available This paper sets out to perform a static force analysis of the single toggle jaw crusher mechanism and to obtain the force transmission characteristics of the mechanism. In order to obtain force transmission metrics that are characteristic of the structure of the mechanism, such influences as friction, dead weight, and inertia are considered to be extraneous and neglected. Equations are obtained by considering the balance of forces at the moving joints and appropriately relating these to the input torque and the output torque. A mechanical advantage, the corresponding transmitted torque, and the variations thereof, during the cycle of motion of the mechanism, are obtained. The mechanical advantage that characterizes the mechanism is calculated as the mean value over the active crushing stroke of the mechanism. The force transmission characteristics can be used as criteria for the comparison of different jaw crusher mechanism designs in order to select the most suitable design for a given application. The equations obtained can also be used in estimating the forces sustained by the components of the mechanism.

  19. Methods for Force Analysis of Overconstrained Parallel Mechanisms: A Review

    Science.gov (United States)

    Liu, Wen-Lan; Xu, Yun-Dou; Yao, Jian-Tao; Zhao, Yong-Sheng

    2017-11-01

    The force analysis of overconstrained PMs is relatively complex and difficult, for which the methods have always been a research hotspot. However, few literatures analyze the characteristics and application scopes of the various methods, which is not convenient for researchers and engineers to master and adopt them properly. A review of the methods for force analysis of both passive and active overconstrained PMs is presented. The existing force analysis methods for these two kinds of overconstrained PMs are classified according to their main ideas. Each category is briefly demonstrated and evaluated from such aspects as the calculation amount, the comprehensiveness of considering limbs' deformation, and the existence of explicit expressions of the solutions, which provides an important reference for researchers and engineers to quickly find a suitable method. The similarities and differences between the statically indeterminate problem of passive overconstrained PMs and that of active overconstrained PMs are discussed, and a universal method for these two kinds of overconstrained PMs is pointed out. The existing deficiencies and development directions of the force analysis methods for overconstrained systems are indicated based on the overview.

  20. Anger biting. The hidden impulse.

    Science.gov (United States)

    Walter, R D

    1985-09-01

    Based upon the paralogical reasoning of the anger-impulsive biter, this paper addresses the overload of emotional catharsis which can block a full memory of the biting event and suspend the logical infrastructure of rational behavior. In an effort to overcome these types of investigative difficulties, the paper suggests an approach to resolve dilemma through decompressing the emotional content into path ways of logical understanding. By offering a network of rationale hooks, the perpetrator becomes better equipped to acknowledge the deed.

  1. Factors associated with anterior open bite in children with developmental disabilities.

    Science.gov (United States)

    de Castilho, Lia Silva; Abreu, Mauro Henrique Nogueira Guimarães; Pires E Souza, Luiz Gustavo de Almeida; Romualdo, Leiliane Teresinha de Almeida; Souza E Silva, Maria Elisa; Resende, Vera Lúcia Silva

    2018-01-01

    To investigate factors associated with anterior open bite in individuals aged from 2 to 33 years with developmental disabilities. This is a cross-sectional study. A total of 271 dental records were examined. The anterior open bite analyzed was determined based on clinic exam. These variables were also analyzed: gender, age, education level of mother, International Code of Diseases (ICD), mouth breathing, use of anticonvulsant drugs, hyperkinesis, pacifier use, thumb sucking, seizure, and involuntary movements. For the purposes of analysis, the individuals were categorized as being with and without anterior open bite. Variables with a p-value of open bite than nasal breathers. Pacifier users are more likely to have an anterior open bite (3.32-fold, 95% CI: 1.62-6.77). Individuals with reported involuntary movements had a 2.66-fold (95% CI: 1.26-5.63) greater chance of exhibiting anterior open bite. Users of anticonvulsants drugs had a 3.05 (95% CI: 1.57-5.92) greater chance of showing anterior open bite. Involuntary movements, mouth breathing, using anticonvulsant drugs, and using pacifier are factors associated with anterior open bite in patients with developmental disabilities. © 2017 Special Care Dentistry Association and Wiley Periodicals, Inc.

  2. Open bite as a risk factor for orthodontic root resorption.

    Science.gov (United States)

    Motokawa, Masahide; Terao, Akiko; Kaku, Masato; Kawata, Toshitsugu; Gonzales, Carmen; Darendeliler, M Ali; Tanne, Kazuo

    2013-12-01

    The purpose of the present study was to clarify the prevalence and degree of root resorption induced by orthodontic treatment in patients with and without open bite. One hundred and eleven patients treated with multibracket appliances were retrospectively selected from the patients and divided into non-open bite (NOB) and open bite (OB) groups. The severity of root resorption and the root shape were classified into five groups on periapical radiographs before and after treatment. Moreover, only in the OB group, all teeth were sub-divided into functional and hypofunctional ones that are occluding and non-occluding. As the results of multiple linear regression analysis of patient characteristics and clinical variables with the number of overall root resorption, the independent variables that were found to contribute significantly to root resorption were bite and abnormal root shape. The prevalences of root resorption evaluated in the number of patients were significantly higher in OB group than in NOB group, and those in the number of teeth were significantly higher in OB group than in NOB group, in particular anterior and premolar teeth. The prevalence of resorbed teeth with abnormal root shapes was also significantly higher in OB group than in NOB group. On the other hand, in OB group, the prevalences of root resorption and teeth with abnormal root shape were significantly greater in hypofunctional teeth than in normal functional teeth. There are more teeth with root resorption and abnormal root shape in open bite cases than in normal bite cases, and more teeth with abnormal root shapes and root resorption in hypofunctional teeth than in functional teeth.

  3. Monkey Bites among US Military Members, Afghanistan, 2011

    Science.gov (United States)

    Baker, Katheryn A.

    2012-01-01

    Bites from Macaca mulatta monkeys, native to Afghanistan, can cause serious infections. To determine risk for US military members in Afghanistan, we reviewed records for September–December 2011. Among 126 animal bites and exposures, 10 were monkey bites. Command emphasis is vital for preventing monkey bites; provider training and bite reporting promote postexposure treatment. PMID:23017939

  4. Temporomandibular disorders and psychological status in adult patients with a deep bite

    DEFF Research Database (Denmark)

    Sonnesen, Liselotte; Svensson, Peter

    2008-01-01

    Temporomandibular disorders (TMDs) and psychological status were examined in adult patients with a deep bite and compared with an adult age- and gender-matched control group with neutral occlusion. The deep bite group consisted of 20 females (mean age 30.3 years) and 10 males (mean age 33.1 years......). The control group comprised 20 females (mean age 29.4 years) and 10 males (mean age 34.2 years). TMD examination, according to the Research Diagnostic Criteria for TMD (RDC/TMD), cephalometric lateral radiographs, registration of occlusion, and bite force were performed. To test the mean differences between...... group compared with the controls. Somatization scores were significantly higher in the deep bite group compared with the controls (P psychological...

  5. Nonlinear Analysis of Renal Autoregulation Under Broadband Forcing Conditions

    DEFF Research Database (Denmark)

    Marmarelis, V Z; Chon, K H; Chen, Y M

    1994-01-01

    Linear analysis of renal blood flow fluctuations, induced experimentally in rats by broad-band (pseudorandom) arterial blood pressure forcing at various power levels, has been unable to explain fully the dynamics of renal autoregulation at low frequencies. This observation has suggested...... the possibility of nonlinear mechanisms subserving renal autoregulation at frequencies below 0.2 Hz. This paper presents results of 3rd-order Volterra-Wiener analysis that appear to explain adequately the nonlinearities in the pressure-flow relation below 0.2 Hz in rats. The contribution of the 3rd-order kernel...... in describing the dynamic pressure-flow relation is found to be important. Furthermore, the dependence of 1st-order kernel waveforms on the power level of broadband pressure forcing indicates the presence of nonlinear feedback (of sigmoid type) based on previously reported analysis of a class of nonlinear...

  6. Rat bite fever in a pet lover.

    Science.gov (United States)

    Cunningham, B B; Paller, A S; Katz, B Z

    1998-02-01

    Rat-bite fever is an uncommon bacterial illness resulting from infection with Streptobacillus moniliformis that is often transmitted by the bite of a rat. The cutaneous findings in rat-bite fever are nonspecific but have been described as maculopapular or petechial. We describe a 9-year-old girl with acrally distributed hemorrhagic pustules, fever, and arthralgias. Diagnosis was delayed because of difficulty in identifying the pathologic organism. She was successfully treated with 10 days of ceftriaxone.

  7. The influence of bite size and multiple bites on oral texture sensations

    NARCIS (Netherlands)

    Wijk, de R.A.; Engelen, L.; Prinz, J.F.; Weenen, H.

    2003-01-01

    The influence of bite size on sensory mouth- and afterfeel sensations was explored in two studies in which single bites of vanilla custard desserts were varied from 2 to 11 ml (study 1) and in which series of five bites of two different custard desserts were presented consecutively (study 2). In

  8. The influence of bite size and multiple bites on oral texture sensations

    NARCIS (Netherlands)

    Wijk, R.A. de; Engelen, L.; Prinz, J.F.; Weenen, H.

    2003-01-01

    The influence of bite size on sensory mouthfeel and afterfeel sensations was explored in two studies in which single bites of vanilla custard desserts were varied from 2 to 11 mL (study 1) and in which series of five bites of two different custard desserts were presented consecutively (study 2). In

  9. Muscle forces analysis in the shoulder mechanism during wheelchair propulsion.

    Science.gov (United States)

    Lin, Hwai-Ting; Su, Fong-Chin; Wu, Hong-Wen; An, Kai-Nan

    2004-01-01

    estimates of muscular forces during motion, indicating that this prototype modelling and analysis technique will aid in study, analysis and therapy of the mechanics and underlying pathomechanics involved in various musculoskeletal overuse syndromes.

  10. Analysis of dynamic regimes in stochastically forced Kaldor model

    International Nuclear Information System (INIS)

    Bashkirtseva, Irina; Ryazanova, Tatyana; Ryashko, Lev

    2015-01-01

    We consider the business cycle Kaldor model forced by random noise. Detailed parametric analysis of deterministic system is carried out and zones of coexisting stable equilibrium and stable limit cycle are found. Noise-induced transitions between these attractors are studied using stochastic sensitivity function technique and confidence domains method. Critical values of noise intensity corresponding to noise-induced transitions “equilibrium → cycle” and “cycle → equilibrium” are estimated. Dominants in combined stochastic regimes are discussed.

  11. Analysis of the forces acting on beating cilia

    International Nuclear Information System (INIS)

    Sangani, Ashok S; Vidyadharan, Jyothish; Foster, Kenneth W

    2016-01-01

    Detailed analysis of the forces acting on a uniform-diameter beating cilium is carried out to determine the moment generated by the inter-doublet forces acting along the length of a cilium and the results are compared with the sliding-control theory according to which the moment is a function of the interdoublet sliding. In the central part of the cilium the inter-doublet forces are found to be proportional to the inter-doublet sliding. However, in spite of the uniformity of the diameter of the cilium, the proportionality constant, known as the dynamic stiffness, is not constant along its entire length. Significant variations are observed in the regions both near the tip of the cilium and proximal to the cell body. In the tip region the magnitude of the dynamic stiffness is found to decrease. This decrease is probably due to decrease in the number density of the molecular motors in that region and in the number of doublet microtubules. The behavior in the proximal region, on the other hand, does not appear to be well described by the sliding control theory. Our analysis therefore suggests that the dynamics of ciliary beating cannot be adequately described by a simple sliding-control theory with constant dynamic stiffness. Our analysis suggests that the cilium is differentiated into a basal region optimized for the creation of a wave and a central region optimized to support a traveling wave that provides the thrust for the cell. (paper)

  12. Pigs suffering from injurious behaviours like flank biting and tail biting are more interested to manipulate a novel rope than uninjured control animals

    NARCIS (Netherlands)

    Bracke, M.B.M.; Ettema, K.

    2014-01-01

    Injurious behaviours in pigs may involve persistent or forceful biting in specific body parts and may result in wounds of the pigs’ tails, ears, flanks and legs. Such behaviours, which may lead to progressive tissue damage, are difficult to counteract. On a commercial farm 22 groups of pigs with

  13. Stability of anterior open-bite treatment with occlusal adjustment.

    Science.gov (United States)

    Janson, Guilherme; Crepaldi, Marcus Vinicius; Freitas, Karina Maria Salvatore; de Freitas, Marcos Roberto; Janson, Waldyr

    2010-07-01

    In this study, we aimed to evaluate the long-term stability of anterior open-bite treatment with occlusal adjustment and the dentinal sensitivity caused by this procedure in the long term. The sample comprised 17 open-bite patients who experienced relapse of the negative vertical overbite after orthodontic treatment and were retreated with occlusal adjustment. The cephalometric changes were evaluated on lateral cephalograms obtained before and after the occlusal adjustment and in the long term (mean, 3.4 years after occlusal adjustment). Dentinal sensitivity was also evaluated before the occlusal adjustment, and 1.35 months, 4.61 months, and 3.4 years later. The cephalometric statuses between the 3 evaluations were compared with analysis of variance (ANOVA) and Tukey tests. The percentages of clinically significant relapse were calculated. To compare dentinal sensitivity at the several stages, nonparametric Friedman and Wilcoxon tests were performed. Statistically significant relapse of anterior open bite occurred in 33.3% of the patients. Those who had the procedure before 21 years of age were most likely to experience relapse. Dentinal sensitivity remained within the normal range in the long term. Despite the statistically significant relapse of anterior open bite, clinically significant stability was found in 66.7% of the patients. Copyright (c) 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  14. Why social network analysis is important to Air Force applications

    Science.gov (United States)

    Havig, Paul R.; McIntire, John P.; Geiselman, Eric; Mohd-Zaid, Fairul

    2012-06-01

    Social network analysis is a powerful tool used to help analysts discover relationships amongst groups of people as well as individuals. It is the mathematics behind such social networks as Facebook and MySpace. These networks alone cause a huge amount of data to be generated and the issue is only compounded once one adds in other electronic media such as e-mails and twitter. In this paper we outline the basics of social network analysis and how it may be used in current and future Air Force applications.

  15. Texas coral snake (Micrurus tener) bites.

    Science.gov (United States)

    Morgan, David L; Borys, Douglas J; Stanford, Rhandi; Kjar, Dean; Tobleman, William

    2007-02-01

    The clinical features of bites from Texas coral snakes (Micrurus tener) have not been well studied. Our goal was to review the largest number of victims of Texas coral snakebites to determine their characteristics, effects, treatment, and outcome. Retrospective case series of Micrurus tener exposures reported to the Texas Poison Center Network from 2000 to 2004. Eighty-two patients were included in the analysis. Most (57.3%) were 18 to 49-year-old men. Almost 90% had local swelling, pain, erythema, or paresthesias. Only 7.3% had systemic effects, and none of these were severe. Over half received coral snake antivenin, and 15.9% were given opioids for pain. No patient died and no patient required mechanical ventilation due to hypoventilation from the snakebite. There were more local findings and less severe systemic effects than previously reported. Antivenin is not needed for most of these patients, and opioids may be administered safely.

  16. Talking to Patients about Preventing Tick Bites

    Centers for Disease Control (CDC) Podcasts

    2012-02-14

    This podcast will help health care providers identify patients who are at increased risk of getting tick bites and provide these patients with tick bite prevention and removal tips.  Created: 2/14/2012 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 2/14/2012.

  17. Iguana bites reported to Texas poison centers.

    Science.gov (United States)

    Forrester, Mathias B

    2010-09-01

    Although thousands of iguanas are kept as pets in the United States, information on their bites is limited. The intent of this investigation was to describe the pattern of iguana bites reported to Texas poison centers. Iguana bites reported during 1998-2008 were identified. The distribution of cases by various factors was determined. Of 59 total bites, 71% were managed on-site, 17% of the patients were at or en route to a health care facility when the poison center was contacted, and 10% were referred to a health care facility. The medical outcome was no effect in 9% of the cases, minor effect in 24%, moderate effect in 2%, not followed but minimal effects possible in 64%, and unable to follow but potentially toxic in 2%. Most iguana bites reported to Texas poison centers did not result in serious effects and were managed on-site. Copyright © 2010 Elsevier Inc. All rights reserved.

  18. Biting

    Science.gov (United States)

    ... Distraction works wonders with kids this age. If emotions and energy levels are running high or if boredom has set in, help redirect a little one's attention to a more positive activity, like dancing to music, coloring, or playing a game. Discipline usually is not necessary, since most kids ...

  19. Cryogenic recovery analysis of forced flow supercritical helium cooled superconductors

    International Nuclear Information System (INIS)

    Lee, A.Y.

    1977-08-01

    A coupled heat conduction and fluid flow method of solution was presented for cryogenic stability analysis of cabled composite superconductors of large scale magnetic coils. The coils are cooled by forced flow supercritical helium in parallel flow channels. The coolant flow reduction in one of the channels during the spontaneous recovery transient, after the conductor undergoes a transition from superconducting to resistive, necessitates a parallel channel analysis. A way to simulate the parallel channel analysis is described to calculate the initial channel inlet flow rate required for recovery after a given amount of heat is deposited. The recovery capability of a NbTi plus copper composite superconductor design is analyzed and the results presented. If the hydraulics of the coolant flow is neglected in the recovery analysis, the recovery capability of the superconductor will be over-predicted

  20. Gait Analysis Study of Runner Using Force Plate

    Directory of Open Access Journals (Sweden)

    Flaviana Catherine

    2017-02-01

    Full Text Available Humans do regular physical activities such as running. Gait is forward  propulsion of the human body using lower extremities as a thrust. Humans gait pattern is characterized by their limbs movement in terms of velocity, ground reaction force, work, kinetic energy and potential energy cycle . Human gait analysis is used to assess, to plan, and to deliver the treatment for individuals based on the conditions that affect their ability to move. Gait analysis is commonly used in running sport to improve the efficiency of athletes in running and to identify problems related to their posture or movement. The aim of this research is to do running gait analysis study of human, using force plate which equipped by track board. The benefit of this study is to provide information, ideas and new perspectives about running and its prevention over an injury. The main method that will be discussed in this study is system design of gait analysis with specific setting, hardware and software, in order to acquire data(s.

  1. Force Characteristics Analysis for Linear Machine with DC Field Excitations

    Directory of Open Access Journals (Sweden)

    A/L Krishna Preshant

    2018-01-01

    Full Text Available In urban regions and particularly in developing countries such as Malaysia with its ever-growing transport sector, there is the need for energy efficient systems. In urban railway systems there is a requirement of frequent braking and start/stop motion, and energy is lost during these processes. To improve the issues of the conventional braking systems, particularly in Japan, they have introduced linear induction motor techniques. The drawbacks of this method, however, is the use of permanent magnets, which not only increase the weight of the entire system but also increases magnetic cogging. Hence an alternative is required which uses the same principles as Magnetic-Levitation but using a magnet-less system. Therefore, the objective of this research is to propose an electromagnetic rail brake system and to analyze the effect of replacing permanent magnets with a magnet-less braking systems to produce a significant amount of brake thrust as compared with the permanent magnet system. The modeling and performance analysis of the model is done using Finite Element Analysis (FEA. The mechanical aspects of the model are designed on Solidworks and then imported to JMAG Software to proceed with the electro-magnetic analysis of the model. There are 3 models developed: Base Model (steel, Permanent Magnet (PM Model and DC Coil Model. The performance of the proposed 2D models developed is evaluated in terms of average force produced and motor constant square density. By comparing the values for the 3 models for the same case of 9A current supplied for a 0.1mm/s moving velocity, the base model, permanent magnet model and DC coil model produced an average force of 7.78 N, 7.55 N, and 8.34 N respectively, however, with increase in DC current supplied to the DC coil model, the average force produced is increased to 13.32 N. Thus, the advantage of the DC coil (magnet-less model, is, that the force produced can be controlled by varying the number of turns in the

  2. Visualizing decoupling in nanocrystalline alloys: A FORC-temperature analysis

    Science.gov (United States)

    Rivas, M.; Martínez-García, J. C.; Gorria, P.

    2016-02-01

    Devitrifying ferromagnetic amorphous precursors in the adequate conditions may give rise to disordered assemblies of densely packed nanocrystals with extraordinary magnetic softness well explained by the exchange coupling among multiple crystallites. Whether the magnetic exchange interaction is produced by direct contact or mediated by the intergranular amorphous matrix has a strong influence on the behaviour of the system above room temperature. Multi-phase amorphous-nanocrystalline systems dramatically harden when approaching the amorphous Curie temperature (TC) due to the hard grains decoupling. The study of the thermally induced decoupling of nanosized crystallites embedded in an amorphous matrix has been performed in this work by the first-order reversal curves (FORCs) analysis. We selected a Fe-rich amorphous alloy with TC = 330 K, in order to follow the evolution of the FORC diagrams obtained below and above such temperature in samples with different percentages of nanocrystalline phase. The existence of up to four regions exhibiting unlike magnetic behaviours is unambiguously determined from the temperature evolution of the FORC.

  3. Contrast enhancement of bite mark images using the grayscale mixer in ACR in Photoshop®.

    Science.gov (United States)

    Evans, Sam; Noorbhai, Suzanne; Lawson, Zoe; Stacey-Jones, Seren; Carabott, Romina

    2013-05-01

    Enhanced images may improve bite mark edge definition, assisting forensic analysis. Current contrast enhancement involves color extraction, viewing layered images by channel. A novel technique, producing a single enhanced image using the grayscale mix panel within Adobe Camera Raw®, has been developed and assessed here, allowing adjustments of multiple color channels simultaneously. Stage 1 measured RGB values in 72 versions of a color chart image; eight sliders in Photoshop® were adjusted at 25% intervals, all corresponding colors affected. Stage 2 used a bite mark image, and found only red, orange, and yellow sliders had discernable effects. Stage 3 assessed modality preference between color, grayscale, and enhanced images; on average, the 22 survey participants chose the enhanced image as better defined for nine out of 10 bite marks. The study has shown potential benefits for this new technique. However, further research is needed before use in the analysis of bite marks. © 2013 American Academy of Forensic Sciences.

  4. Analysis of the tractive force pattern on a knot by force measurement during laparoscopic knot tying.

    Science.gov (United States)

    Takayasu, Kenta; Yoshida, Kenji; Kinoshita, Hidefumi; Yoshimoto, Syunsuke; Oshiro, Osamu; Matsuda, Tadashi

    2017-07-19

    Quantifying surgical skills assists novice surgeons when learning operative techniques. We measured the interaction force at a ligation point and clarified the features of the force pattern among surgeons with different skill levels during laparoscopic knot tying. Forty-four surgeons were divided into three groups based on experience: 13 novice (0-5 years), 16 intermediate (6-15 years), and 15 expert (16-30 years). To assess the tractive force direction and volume during knot tying, we used a sensor that measures six force-torque values (x-axis: Fx, y-axis: Fy, z-axis: Fz, and xy-axis: Fxy) attached to a slit Penrose drain. All participants completed one double knot and five single knot sequences. We recorded completion time, force volume (FV), maximum force (MF), time over 1.5 N, duration of non-zero force, and percentage time when vertical force exceeded horizontal force (PTz). There was a significant difference between groups for completion time (p = 0.007); FV (total: p = 0.002; Fx: p = 0.004, Fy: p = 0.007, Fxy: p = 0.004, Fz: p force (p = 0.029); and PTz (p force pattern at the ligation point during suturing by surgeons with three levels of experience using a force measurement system. We revealed that both force volume and force direction differed depending on surgeons' skill level during knot tying. Copyright © 2017. Published by Elsevier Inc.

  5. A comparative study between xerographic, computer-assisted overlay generation and animated-superimposition methods in bite mark analyses.

    Science.gov (United States)

    Tai, Meng Wei; Chong, Zhen Feng; Asif, Muhammad Khan; Rahmat, Rabiah A; Nambiar, Phrabhakaran

    2016-09-01

    This study was to compare the suitability and precision of xerographic and computer-assisted methods for bite mark investigations. Eleven subjects were asked to bite on their forearm and the bite marks were photographically recorded. Alginate impressions of the subjects' dentition were taken and their casts were made using dental stone. The overlays generated by xerographic method were obtained by photocopying the subjects' casts and the incisal edge outlines were then transferred on a transparent sheet. The bite mark images were imported into Adobe Photoshop® software and printed to life-size. The bite mark analyses using xerographically generated overlays were done by comparing an overlay to the corresponding printed bite mark images manually. In computer-assisted method, the subjects' casts were scanned into Adobe Photoshop®. The bite mark analyses using computer-assisted overlay generation were done by matching an overlay and the corresponding bite mark images digitally using Adobe Photoshop®. Another comparison method was superimposing the cast images with corresponding bite mark images employing the Adobe Photoshop® CS6 and GIF-Animator©. A score with a range of 0-3 was given during analysis to each precision-determining criterion and the score was increased with better matching. The Kruskal Wallis H test showed significant difference between the three sets of data (H=18.761, p<0.05). In conclusion, bite mark analysis using the computer-assisted animated-superimposition method was the most accurate, followed by the computer-assisted overlay generation and lastly the xerographic method. The superior precision contributed by digital method is discernible despite the human skin being a poor recording medium of bite marks. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  6. Venomous Snake Bite Injuries at Kitui District Hospital | Kihiko ...

    African Journals Online (AJOL)

    Background Snake bites are a neglected public health issue in poor rural communities, and the true burden of snake bites is not known. Kitui County has a high incidence of snake bites and no functional snake bite control programs exists. Diagnostic tests for snake species identification are not available and management ...

  7. Continuum analysis of biological systems conserved quantities, fluxes and forces

    CERN Document Server

    Suraishkumar, G K

    2014-01-01

    This book addresses the analysis, in the continuum regime, of biological systems at various scales, from the cellular level to the industrial one. It presents both fundamental conservation principles (mass, charge, momentum and energy) and relevant fluxes resulting from appropriate driving forces, which are important for the analysis, design and operation of biological systems. It includes the concept of charge conservation, an important principle for biological systems that is not explicitly covered in any other book of this kind. The book is organized in five parts: mass conservation; charge conservation; momentum conservation; energy conservation; and multiple conservations simultaneously applied. All mathematical aspects are presented step by step, allowing any reader with a basic mathematical background (calculus, differential equations, linear algebra, etc.) to follow the text with ease. The book promotes an intuitive understanding of all the relevant principles and in so doing facilitates their applica...

  8. The examination and identification of bite marks in foods using 3D scanning and 3D comparison methods.

    Science.gov (United States)

    Naether, Silvio; Buck, Ursula; Campana, Lorenzo; Breitbeck, Robert; Thali, Michael

    2012-01-01

    Bite mark analysis offers the opportunity to identify the biter based on the individual characteristics of the dentitions. Normally, the main focus is on analysing bite mark injuries on human bodies, but also, bite marks in food may play an important role in the forensic investigation of a crime. This study presents a comparison of simulated bite marks in different kinds of food with the dentitions of the presumed biter. Bite marks were produced by six adults in slices of buttered bread, apples, different kinds of Swiss chocolate and Swiss cheese. The time-lapse influence of the bite mark in food, under room temperature conditions, was also examined. For the documentation of the bite marks and the dentitions of the biters, 3D optical surface scanning technology was used. The comparison was performed using two different software packages: the ATOS modelling and analysing software and the 3D studio max animation software. The ATOS software enables an automatic computation of the deviation between the two meshes. In the present study, the bite marks and the dentitions were compared, as well as the meshes of each bite mark which were recorded in the different stages of time lapse. In the 3D studio max software, the act of biting was animated to compare the dentitions with the bite mark. The examined food recorded the individual characteristics of the dentitions very well. In all cases, the biter could be identified, and the dentitions of the other presumed biters could be excluded. The influence of the time lapse on the food depends on the kind of food and is shown on the diagrams. However, the identification of the biter could still be performed after a period of time, based on the recorded individual characteristics of the dentitions.

  9. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Hair care / hair loss Injured skin Nail care Artificial nails Healthy nails Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find a ...

  10. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... figure out how to avoid these situations and develop a plan to stop. Just knowing when you’ ... a doctor. If you bite your nails and develop a skin or nail infection, consult a board- ...

  11. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... your nails to your face and mouth. To help you stop biting your nails, dermatologists recommend the ... stress ball or silly putty instead. This will help keep your hands busy and away from your ...

  12. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... like biting your nails, try playing with a stress ball or silly putty instead. This will help ... of hangnails, or other triggers, such as boredom, stress, or anxiety. By figuring out what causes you ...

  13. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Part 1: Structure Part 2: Origin Part 3: Function Textbook Study notes Image library 3-D animated ... hair, and nail care Nail care Nail biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site= ...

  14. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and nails Skin dictionary Camp Discovery Good Skin Knowledge lesson plans and activities Video library Find a ... counter, this safe, but awful-tasting formula discourages many people from biting their nails. Get regular manicures: ...

  15. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Center Coding and reimbursement Coding MACRA Fee schedule Managing a practice Prior authorization assistance Evaluating practice models ... Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care ...

  16. [Bites of venomous snakes in Switzerland].

    Science.gov (United States)

    Plate, Andreas; Kupferschmidt, Hugo; Schneemann, Markus

    2016-06-08

    Although snake bites are rare in Europe, there are a constant number of snake bites in Switzerland. There are two domestic venomous snakes in Switzerland: the aspic viper (Vipera aspis) and the common European adder (Vipera berus). Bites from venomous snakes are caused either by one of the two domestic venomous snakes or by an exotic venomous snake kept in a terrarium. Snake- bites can cause both a local and/or a systemic envenoming. Potentially fatal systemic complications are related to disturbances of the hemostatic- and cardiovascular system as well as the central or peripheral nervous system. Beside a symptomatic therapy the administration of antivenom is the only causal therapy to neutralize the venomous toxins.

  17. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... hair loss Injured skin Nail care Artificial nails Healthy nails Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find a ...

  18. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... as boredom, stress, or anxiety. By figuring out what causes you to bite your nails, you can ...

  19. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... your head About nails: More important than you think Questions lots of kids ask about their skin, ... habit with a good habit: When you feel like biting your nails, try playing with a stress ...

  20. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... care / hair loss Injured skin Nail care Anti-aging skin care Kids’ zone About skin: Your body's ... biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find a ...

  1. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Hair care / hair loss Injured skin Nail care Anti-aging skin care Kids’ zone About skin: Your ... Nail biting Nail changes a dermatologist should examine Anti-aging skin care Kids’ zone Video library Find ...

  2. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... biting can also leave you vulnerable to infection as you pass harmful bacteria and viruses from your ... your triggers: These could be physical triggers, such as the presence of hangnails, or other triggers, such ...

  3. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Rotation PICMED Grant Professionalism Award Resident-Fellow QI Project Award Resident International Grant Resident Scholarship to Legislative ... continue through adulthood, and the side effects can be more than cosmetic. Repeated nail biting can make ...

  4. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Scholarship to Legislative Conference Skin Care for Developing Countries Grant State Advocacy Grant Strauss and Katz Scholarship ... like biting your nails, try playing with a stress ball or silly putty instead. This will help ...

  5. Human bite as a weapon of assault

    African Journals Online (AJOL)

    resulted more in bites involving females than males. Contusion (47.6%) ... homicides, sexual assault and also in attempted suicide1. It may be found in ... original work is properly cited. ... deployed for determining tests of statistical significance;.

  6. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and Lectureship Clarence S. Livingood Award and Lectureship Marion B. Sulzberger Award and Lectureship Master Dermatologist Award Members ... care Nail care Nail biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs.con.aad. ...

  7. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Center Meetings and events Make a difference Career planning AAD apps Academy meeting Chronic urticaria—for members ... as boredom, stress, or anxiety. By figuring out what causes you to bite your nails, you can ...

  8. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Part 2: Origin Part 3: Function Textbook Study notes Image library 3-D animated image library Board ... gradually stop biting your nails: Some doctors recommend taking a gradual approach to break the habit. Try ...

  9. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... your nails: Some doctors recommend taking a gradual approach to break the habit. Try to stop biting ...

  10. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Injured skin Nail care Artificial nails Healthy nails Child nail care Manicure safety Nail biting Nail changes ... c Explore the Academy Member resources Practice Tools Education Meetings & events Advocacy Public & patients Academy resources for: ...

  11. [Mandible function in taking construction bite for activator].

    Science.gov (United States)

    Irie, M

    1989-06-01

    Functional effects of construction bite for activator (Andresen type) especially on lateral pterygoid muscle, as well as the positional changes of the mandible, hyoid bone and surface EMGs from bilateral anterior temporal (TA) and masseter (MM) muscle, were studied on the electric force scale, MKG, EMG and cephalometric radiographs in 14 subjects with anterior cross bite in mixed dentition. The cephalometric radiographs were taken at the start of each patient's treatment. One was taken with the mandible in the intercuspal position and one was also taken with the activator in the mouth at the overjet improvement. The activator patients were divided into two groups because of differences in the direction of movement of the hyoid bone in the FH plane. In group O (7 patients), the movement of the hyoid bone was at an oblique angle to the FH plane, while in group D (7 patients) the movement ot the hyoid bone with nearly direct below angle to FH plane. The patients were further divided into three types because of differences in the distance between the hyoid bone and mental spine, and combined with the groups OA (3 patients), OB (2 patients), OC (2 patients), DA (5 patients), DB (2 patients) and DC (Naught). The results obtained were as follows: The forces for the construction bite for groups O and D were 2.71 Kg and 2.72 kg, respectively. Type OC required significantly heavier force. (p less than 0.05) In the condylar test, O group was significantly smaller at the start of treatment, but not after overjet improvement. Type OA and OB were also significantly smaller at the start of treatment. (p less than 0.05) Velocity of opening for group D was significantly (p less than 0.05) faster at the start of treatment, but not after that. There was no significant difference in EMGs between the groups, with activator in the mouse D group much increased as it EMGs. The EMGs M/T ratio for both groups was approximately 100% at the start of treatment for overjet improvement. In cases

  12. Open bite treatment using clear aligners.

    Science.gov (United States)

    Guarneri, Maria Paola; Oliverio, Teresa; Silvestre, Ivana; Lombardo, Luca; Siciliani, Giuseppe

    2013-09-01

    A 35-year-old female patient with dentoalveolar open bite of 4 mm, molar Class I malocclusion, centered midlines, moderate crowding, and labial inclination of the lower incisor was treated with clear aligners to reduce protrusion and close the anterior open bite. The result showed that clear aligners were an effective method with which to correct this malocclusion. The treatment was complete after 18 months. The patient was satisfied with her new appearance and function.

  13. Anterior open bite treatment with magnets.

    Science.gov (United States)

    Kiliaridis, S; Egermark, I; Thilander, B

    1990-11-01

    The aim of this study was to examine the effects of repelling magnets on the treatment of anterior open bite and compare them with the effects of acrylic posterior bite-blocks. Twenty patients, aged 9-16 years with skeletal anterior open bite, were randomly divided into two groups. In one group the patients wore posterior repelling magnet splints and in the other they wore acrylic posterior bite-blocks of the same thickness as the magnet splints. The patients were instructed to use their appliance as much as possible (the minimum accepted being 18 hours daily) during a 6-month period. Dental casts, intra-oral photos, and lateral cephalograms were taken before and after treatment, and the patients were also examined regularly to identify the development of any craniomandibular disorders. In the first group, the dental and skeletal vertical relation responded quickly to the magnet treatment. The open bite was generally closed in just under 4 months, especially in patients in early mixed dentition. Spacing in the labial segments decreased in some cases, while slight crowding was induced in others. Transverse problems, i.e. unilateral cross-bite, sometimes followed by scissor-bite on the opposite side, was observed in those patients who were in the early mixed dentition and had used the magnets intensively. The patients who wore acrylic posterior bite-blocks also showed improvement in the dental and skeletal vertical relationships, especially during the first months. This was followed by a 'plateau' period. No transverse problems were found in these patients.

  14. Quantifying seasonal and diel variation in Anopheline and Culex human biting rates in Southern Ecuador.

    Science.gov (United States)

    Ryan, Sadie J; Lippi, Catherine A; Boersch-Supan, Philipp H; Heydari, Naveed; Silva, Mercy; Adrian, Jefferson; Noblecilla, Leonardo F; Ayala, Efraín B; Encalada, Mayling D; Larsen, David A; Krisher, Jesse T; Krisher, Lyndsay; Fregosi, Lauren; Stewart-Ibarra, Anna M

    2017-11-22

    Quantifying mosquito biting rates for specific locations enables estimation of mosquito-borne disease risk, and can inform intervention efforts. Measuring biting itself is fraught with ethical concerns, so the landing rate of mosquitoes on humans is often used as a proxy measure. Southern coastal Ecuador was historically endemic for malaria (Plasmodium falciparum and Plasmodium vivax), although successful control efforts in the 2000s eliminated autochthonous transmission (since 2011). This study presents an analysis of data collected during the elimination period. Human landing catch (HLC) data for three mosquito taxa: two malaria vectors, Anopheles albimanus and Anopheles punctimacula, and grouped Culex spp. were examined for this study. These data were collected by the National Vector Control Service of the Ministry of Health over a 5-year time span (2007-2012) in five cities in southern coastal Ecuador, at multiple households, in all months of the year, during dusk-dawn (18:00-6:00) hours, often at both indoor and outdoor locations. Hurdle models were used to determine if biting activity was fundamentally different for the three taxa, and to identify spatial and temporal factors influencing bite rate. Due to the many different approaches to studying and quantifying bite rates in the literature, a glossary of terms was created, to facilitate comparative studies in the future. Biting trends varied significantly with species and time. All taxa exhibited exophagic feeding behavior, and outdoor locations increased both the odds and incidence of bites across taxa. Anopheles albimanus was most frequently observed biting, with an average of 4.7 bites/h. The highest and lowest respective months for significant biting activity were March and July for An. albimanus, July and August for An. punctimacula, and February and July for Culex spp. Fine-scale differences in endophagy and exophagy, and temporal differences among months and hours exist in biting patterns among

  15. Microbiology of Animal Bite Wound Infections

    Science.gov (United States)

    Abrahamian, Fredrick M.; Goldstein, Ellie J. C.

    2011-01-01

    Summary: The microbiology of animal bite wound infections in humans is often polymicrobial, with a broad mixture of aerobic and anaerobic microorganisms. Bacteria recovered from infected bite wounds are most often reflective of the oral flora of the biting animal, which can also be influenced by the microbiome of their ingested prey and other foods. Bacteria may also originate from the victim's own skin or the physical environment at the time of injury. Our review has focused on bite wound infections in humans from dogs, cats, and a variety of other animals such as monkeys, bears, pigs, ferrets, horses, sheep, Tasmanian devils, snakes, Komodo dragons, monitor lizards, iguanas, alligators/crocodiles, rats, guinea pigs, hamsters, prairie dogs, swans, and sharks. The medical literature in this area has been made up mostly of small case series or case reports. Very few studies have been systematic and are often limited to dog or cat bite injuries. Limitations of studies include a lack of established or inconsistent criteria for an infected wound and a failure to utilize optimal techniques in pathogen isolation, especially for anaerobic organisms. There is also a lack of an understanding of the pathogenic significance of all cultured organisms. Gathering information and conducting research in a more systematic and methodical fashion through an organized research network, including zoos, veterinary practices, and rural clinics and hospitals, are needed to better define the microbiology of animal bite wound infections in humans. PMID:21482724

  16. Comparative analysis of heat transfer correlations for forced convection boiling

    International Nuclear Information System (INIS)

    Guglielmini, G.; Nannei, E.; Pisoni, C.

    1978-01-01

    A critical survey was conducted of the most relevant correlations of boiling heat transfer in forced convection flow. Most of the investigations carried out on partial nucleate boiling and fully developed nucleate boiling have led to the formulation of correlations that are not able to cover a wide range of operating conditions, due to the empirical approach of the problem. A comparative analysis is therefore required in order to delineate the relative accuracy of the proposed correlations, on the basis of the experimental data presently available. The survey performed allows the evaluation of the accuracy of the different calculating procedure; the results obtained, moreover, indicate the most reliable heat transfer correlations for the different operating conditions investigated. This survey was developed for five pressure range (up to 180bar) and for both saturation and subcooled boiling condition

  17. Numerical analysis of laminar forced convection in a spherical annulus

    International Nuclear Information System (INIS)

    Tuft, D.B.

    1980-01-01

    Calculations of steady laminar incompressible fluid-flow and heat transfer in a spherical annulus are presented. Steady pressures, temperatures, velocities, and heat transfer coefficients are calculated for an insulated outer sphere and a 0 0 C isothermal inner sphere with 50 0 C heated water flowing in the annulus. The inner sphere radius is 13.97 cm, the outer sphere radius is 16.83 cm and the radius ratio is 1.2. The transient axisymmetric equations of heat, mass, and momentum conservation are solved numerically in spherical coordinates. The transient solution is carried out in time until steady state is achieved. A variable mesh is used to improve resolution near the inner sphere where temperature and velocity gradients are steep. It is believed that this is the first fully two-dimensional analysis of forced flow in a spherical annulus. Local and bulk Nusselt numbers are presented for Reynolds numbers from 4.4 to 440. Computed bulk Nusselt numbers ranged from 2 to 50 and are compared to experimental results from the literature. Inlet flow jetting off the inner sphere and flow separation are predicted by the analysis. The location of wall jet separation was found to be a function of Reynolds number, indicating the location of separation depends upon the ratio of inertia to viscous forces. Wall jet separation has a pronounced effect on the distribution of local heat flux. The area between inlet and separation was found to be the most significant area for heat transfer. Radial distributions of azimuthal velocity and temperature are presented for various angles beginning at the inlet. Inner sphere pressure distribution is presented and the effect on flow separation is discussed

  18. Verifying Air Force Weather Passive Satellite Derived Cloud Analysis Products

    Science.gov (United States)

    Nobis, T. E.

    2017-12-01

    Air Force Weather (AFW) has developed an hourly World-Wide Merged Cloud Analysis (WWMCA) using imager data from 16 geostationary and polar-orbiting satellites. The analysis product contains information on cloud fraction, height, type and various optical properties including optical depth and integrated water path. All of these products are derived using a suite of algorithms which rely exclusively on passively sensed data from short, mid and long wave imager data. The system integrates satellites with a wide-range of capabilities, from the relatively simple two-channel OLS imager to the 16 channel ABI/AHI to create a seamless global analysis in real time. Over the last couple of years, AFW has started utilizing independent verification data from active sensed cloud measurements to better understand the performance limitations of the WWMCA. Sources utilized include space based lidars (CALIPSO, CATS) and radar (CloudSat) as well as ground based lidars from the Department of Energy ARM sites and several European cloud radars. This work will present findings from our efforts to compare active and passive sensed cloud information including comparison techniques/limitations as well as performance of the passive derived cloud information against the active.

  19. Case Report of a Newborn Injured By Human Bite

    Directory of Open Access Journals (Sweden)

    Emel Ataoğlu

    2015-03-01

    Full Text Available Bite is a type of wound received from the teeth of an animal, including humans. Human bites are third leading cause of all bites after dog and cat bites. Human bites are severe wounds due to the risk of contamination with mix oral flora and rapid tissue destruction. Bite wounds created by humans are seen in variety of circumstances including aggression, rape, murder, and child abuse. Oral cavity contains beta-hemolytic streptococci, anaerobes and other microorganisms. There have been reported cases of septicemia, severe necrotizing fasciitis, HIV infection, and death caused by human bites. Early reporting and treatment of bite wounds decrease the number and severity of wound infection. Here, we present the case of human bite in a nine-day-old girl and discuss the treatment approaches in the light of the relevant literature.

  20. prevalence of biting and non-biting flies in relation to species

    African Journals Online (AJOL)

    USER

    support high abundance of biting flies due to the favourable conditions within the forest for breeding, refuge and easy migration of adult females to animal cages to seek for blood meal. Table 1: Abundance of Biting Flies in Relation to Species in the Jos Museum. Zoological Garden. Site. Stomoxys calcitrans. Haematopota.

  1. Vector field statistical analysis of kinematic and force trajectories.

    Science.gov (United States)

    Pataky, Todd C; Robinson, Mark A; Vanrenterghem, Jos

    2013-09-27

    When investigating the dynamics of three-dimensional multi-body biomechanical systems it is often difficult to derive spatiotemporally directed predictions regarding experimentally induced effects. A paradigm of 'non-directed' hypothesis testing has emerged in the literature as a result. Non-directed analyses typically consist of ad hoc scalar extraction, an approach which substantially simplifies the original, highly multivariate datasets (many time points, many vector components). This paper describes a commensurately multivariate method as an alternative to scalar extraction. The method, called 'statistical parametric mapping' (SPM), uses random field theory to objectively identify field regions which co-vary significantly with the experimental design. We compared SPM to scalar extraction by re-analyzing three publicly available datasets: 3D knee kinematics, a ten-muscle force system, and 3D ground reaction forces. Scalar extraction was found to bias the analyses of all three datasets by failing to consider sufficient portions of the dataset, and/or by failing to consider covariance amongst vector components. SPM overcame both problems by conducting hypothesis testing at the (massively multivariate) vector trajectory level, with random field corrections simultaneously accounting for temporal correlation and vector covariance. While SPM has been widely demonstrated to be effective for analyzing 3D scalar fields, the current results are the first to demonstrate its effectiveness for 1D vector field analysis. It was concluded that SPM offers a generalized, statistically comprehensive solution to scalar extraction's over-simplification of vector trajectories, thereby making it useful for objectively guiding analyses of complex biomechanical systems. © 2013 Published by Elsevier Ltd. All rights reserved.

  2. Confirmatory factor analysis applied to the Force Concept Inventory

    Science.gov (United States)

    Eaton, Philip; Willoughby, Shannon D.

    2018-06-01

    In 1995, Huffman and Heller used exploratory factor analysis to draw into question the factors of the Force Concept Inventory (FCI). Since then several papers have been published examining the factors of the FCI on larger sets of student responses and understandable factors were extracted as a result. However, none of these proposed factor models have been verified to not be unique to their original sample through the use of independent sets of data. This paper seeks to confirm the factor models proposed by Scott et al. in 2012, and Hestenes et al. in 1992, as well as another expert model proposed within this study through the use of confirmatory factor analysis (CFA) and a sample of 20 822 postinstruction student responses to the FCI. Upon application of CFA using the full sample, all three models were found to fit the data with acceptable global fit statistics. However, when CFA was performed using these models on smaller sample sizes the models proposed by Scott et al. and Eaton and Willoughby were found to be far more stable than the model proposed by Hestenes et al. The goodness of fit of these models to the data suggests that the FCI can be scored on factors that are not unique to a single class. These scores could then be used to comment on how instruction methods effect the performance of students along a single factor and more in-depth analyses of curriculum changes may be possible as a result.

  3. Implementation of force distribution analysis for molecular dynamics simulations

    Directory of Open Access Journals (Sweden)

    Seifert Christian

    2011-04-01

    Full Text Available Abstract Background The way mechanical stress is distributed inside and propagated by proteins and other biopolymers largely defines their function. Yet, determining the network of interactions propagating internal strain remains a challenge for both, experiment and theory. Based on molecular dynamics simulations, we developed force distribution analysis (FDA, a method that allows visualizing strain propagation in macromolecules. Results To be immediately applicable to a wide range of systems, FDA was implemented as an extension to Gromacs, a commonly used package for molecular simulations. The FDA code comes with an easy-to-use command line interface and can directly be applied to every system built using Gromacs. We provide an additional R-package providing functions for advanced statistical analysis and presentation of the FDA data. Conclusions Using FDA, we were able to explain the origin of mechanical robustness in immunoglobulin domains and silk fibers. By elucidating propagation of internal strain upon ligand binding, we previously also successfully revealed the functionality of a stiff allosteric protein. FDA thus has the potential to be a valuable tool in the investigation and rational design of mechanical properties in proteins and nano-materials.

  4. Analysis of sitting forces on stationary chairs for daily activities.

    Science.gov (United States)

    Hu, Lingling; Tackett, Bob; Tor, Onder; Zhang, Jilei

    2016-04-01

    No literature related to the study of sitting forces on chairs sat on by people who weighed over 136 kg was found. The Business Institutional Furniture Manufactures Association needs force data for development of performance test standards to test chairs for users who weigh up to 181 kg. 20 participants who weighed from 136 to 186 kg completed 6 tasks on an instrumented chair in the sequence of sitting down, remaining seated and rising. Effects of sitting motion, armrest use and seat cushion thickness on vertical sitting forces and centre-of-force were investigated. Results indicated hard sitting down yielded the highest sitting force of 213% in terms of participants' body weights. Armrest use affected sitting forces of normal sitting down, but not of rising and hard sitting down. Cushion thickness affected sitting forces of normal and hard sitting down and shifting, but not of rising, static seating or stretching backward situations. Practitioner Summary: Results of the sitting force and centre-of-force data obtained for this research can help furniture manufacturers develop new product performance test standards for creating reliable engineering design and manufacturing quality and durable products to meet a niche market need.

  5. Early orthodontic treatment of skeletal open-bite malocclusion with the open-bite bionator: a cephalometric study.

    Science.gov (United States)

    Defraia, Efisio; Marinelli, Andrea; Baroni, Giulia; Franchi, Lorenzo; Baccetti, Tiziano

    2007-11-01

    This study was designed to evaluate the effectiveness of the open-bite bionator in growing subjects with increased vertical dimensions. The records of 20 subjects with high-angle skeletal relationships (MPA > or =25 degrees) were examined. Cephalometric measurements were compared with those obtained from 23 sets of records of an untreated group matched according to age, sex, vertical skeletal relationships, and time intervals between records. Lateral cephalograms were analyzed before the start of treatment (mean age; 8.3 years) and after therapy and retention, with a mean period of observation of 2.5 years. The treated group had a significantly smaller palatal plane-mandibular plane angle (-1.9 degrees) and a greater overbite (+1.5 mm) associated with a significantly smaller overjet when compared with the control group. Based on the analysis of this sample, early treatment of skeletal open bite with the open-bite bionator appears to produce a modest effect that mainly consists of significant improvement in intermaxillary divergence. No favorable effects on the extrusion of posterior teeth were found.

  6. Rasch model based analysis of the Force Concept Inventory

    Directory of Open Access Journals (Sweden)

    Maja Planinic

    2010-03-01

    Full Text Available The Force Concept Inventory (FCI is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear measures for persons and items from raw test scores and which can provide important insight in the structure and functioning of the test (how item difficulties are distributed within the test, how well the items fit the model, and how well the items work together to define the underlying construct. The data for the Rasch analysis come from the large-scale research conducted in 2006-07, which investigated Croatian high school students’ conceptual understanding of mechanics on a representative sample of 1676 students (age 17–18 years. The instrument used in research was the FCI. The average FCI score for the whole sample was found to be (27.7±0.4%, indicating that most of the students were still non-Newtonians at the end of high school, despite the fact that physics is a compulsory subject in Croatian schools. The large set of obtained data was analyzed with the Rasch measurement computer software WINSTEPS 3.66. Since the FCI is routinely used as pretest and post-test on two very different types of population (non-Newtonian and predominantly Newtonian, an additional predominantly Newtonian sample (N=141, average FCI score of 64.5% of first year students enrolled in introductory physics course at University of Zagreb was also analyzed. The Rasch model based analysis suggests that the FCI has succeeded in defining a sufficiently unidimensional construct for each population. The analysis of fit of data to the model found no grossly misfitting items which would degrade measurement. Some items with larger misfit and items with significantly different difficulties in the two samples of students do require further

  7. Force analysis of linear induction motor for magnetic levitation system

    NARCIS (Netherlands)

    Kuijpers, A.A.; Nemlioglu, C.; Sahin, F.; Verdel, A.J.D.; Compter, J.C.; Lomonova, E.

    2010-01-01

    This paper presents the analyses of thrust and normal forces of linear induction motor (LIM) segments which are implemented in a rotating ring system. To obtain magnetic levitation in a cost effective and sustainable way, decoupled control of thrust and normal forces is required. This study includes

  8. Transient filament stretching rheometer I: force balance analysis

    DEFF Research Database (Denmark)

    Szabo, Peter

    1997-01-01

    The filament stretching device which is used increasingly as an apparatus for measuring extensional properties of polymeric liquids isanalysed. A force balance that includes the effects of inertia and surface tension is derived.The force balance may be used to correct for the effects of inertia...

  9. The analysis of cable forces based on natural frequency

    Science.gov (United States)

    Suangga, Made; Hidayat, Irpan; Juliastuti; Bontan, Darwin Julius

    2017-12-01

    A cable is a flexible structural member that is effective at resisting tensile forces. Cables are used in a variety of structures that employ their unique characteristics to create efficient design tension members. The condition of the cable forces in the cable supported structure is an important indication of judging whether the structure is in good condition. Several methods have been developed to measure on site cable forces. Vibration technique using correlation between natural frequency and cable forces is a simple method to determine in situ cable forces, however the method need accurate information on the boundary condition, cable mass, and cable length. The natural frequency of the cable is determined using FFT (Fast Fourier Transform) Technique to the acceleration record of the cable. Based on the natural frequency obtained, the cable forces then can be determine by analytical or by finite element program. This research is focus on the vibration techniques to determine the cable forces, to understand the physical parameter effect of the cable and also modelling techniques to the natural frequency and cable forces.

  10. Risk of Lyme disease development after a tick bite

    Directory of Open Access Journals (Sweden)

    Mladenović Jovan

    2010-01-01

    Full Text Available Background/Aim. Despite numerous research of Lyme disease (LD, there are still many concerns about environmental of infectious agent of LD, as well as its prophylaxis, diagnosis and treatment. The aim of this work was to determine the risk of LD in relation to the way of removing ticks and duration of tick attachment. Methods. In the period from 2000 to 2007 a prospective study was conducted including persons with tick bite referred to the Institute of Epidemiology, Military Medical Academy, and followed for the occurrence of early Lyme disease up to six months after a tick bite. Epidemiological questionnaire was used to collect relevant information about the place and time of tick bites, the way of a removing tick, duration of tick attachment, remnants of a tick left in the skin (parts of the mouth device and the signs of clinical manifestations of LD. Duration of tick attachment was determined on the basis of size of engorged tick and epidemiological data. Removed ticks were determined by the key of Pomerancev. Professional removing of attached tick was considered to be removing of tick with mechanical means by healthcare personnel. Fisher's exact test, Chi squares test and calculation of the relative risk (RR were used for data analysis. Results. Of 3 126 patients with tick bite, clinical manifestations of LD were demonstrated in 19 (0.61%. In the group of subjects (n = 829 in which a tick was not removed professionally there were 17 (2.05% cases with LD, while in the group of respondents (n=2 297 in who a tick was removed professionally there were 2 (0.09% cases with LD after tick bite (RR, 23.55; p < 0.0001. The disease was most frequent in the group of respondents with incompletely and unprofessionally removed ticks (2.46%. In the groups of patients with unprofessionally but completely removed ticks LD occurred in 0.89%, while in the group of subjects with a tick removed by an expert, but incompletely in 0.78% cases. The disease occurred

  11. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... var c = 0; c Tips to prevent and treat bug bites Although most bug bites are harmless, some can spread dangerous diseases like Zika virus, dengue, Lyme disease, and malaria. Particularly if you’re ...

  12. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... bites Although most bug bites are harmless, some can spread dangerous diseases like Zika virus, dengue, Lyme ... and tuck your shirt into your pants. You can also pre-treat outer layers of clothing with ...

  13. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... a dermatologist Why see a board-certified dermatologist? Home Public and patients Skin, hair, and nail care ... bites and stings can be safely treated at home. To treat bug bites and stings at home, ...

  14. the role of force in state formation: a comparative analysis

    African Journals Online (AJOL)

    plt

    monopoly of arms” are the three advantages which the armed forces have over ... military organisation depends rather heavily on intelligence, surprise and adequate information for effective ..... In other words, an artificial separation of 47 years ...

  15. Analysis of Air Force Compliance with Executive Order 13149

    National Research Council Canada - National Science Library

    Kirkwood, John

    2004-01-01

    .... This thesis examines the Air Force's current alternative fuel vehicle (AFV) program and its evolution to determine how effective it is and how it should be adjusted to promote compliance with E.O. 13149...

  16. Critical Analysis on the Defeat of Task Force Ranger

    National Research Council Canada - National Science Library

    Day, Clifford

    1997-01-01

    .... The final stage, UNOSOM II, involved a peace enforcement and nation building mission. On Sunday, 3 October 1993, the relative success of UNOSOM II suddenly turned violent when a US Task Force came under heavy fire from Somali gunmen...

  17. Analysis of Air Force Civil Engineering Strategic Planning

    National Research Council Canada - National Science Library

    Mondo, Francis

    2003-01-01

    Several organizations within the Department of Defense, including the Air Force Civil Engineer, are actively engaged in strategic planning in an effort to create a roadmap for future capabilities and performance...

  18. Bacteremia with Bacteroides pyogenes after a cat bite

    DEFF Research Database (Denmark)

    Madsen, Ida Ringsborg; Justesen, Ulrik Stenz

    2011-01-01

    Animal bite wounds are often infected with bacteria from the animal's oral flora. We report what we believe to be the first case of bacteremia with Bacteroides pyogenes resulting from an infected cat bite.......Animal bite wounds are often infected with bacteria from the animal's oral flora. We report what we believe to be the first case of bacteremia with Bacteroides pyogenes resulting from an infected cat bite....

  19. Scrotal dog bite: unusual case and review of pediatric literature.

    Science.gov (United States)

    Bertozzi, M; Prestipino, M; Nardi, N; Falcone, F; Appignani, A

    2009-09-01

    Animal bites to human external genitalia are rare. Only a few cases of scrotal dog bite in children have been reported. We present an additional specific case of a scrotal dog bite in a child because the lesion and its repair have not been previously reported in published pediatric studies. A traumatic resection of the right testicular vas deferens was repaired by microsurgical vasoepididymal anastomosis. A review of the published data was also performed to analyze the management of scrotal dog bite lesions.

  20. Identifikasi bite marks dengan ekstraksi DNA metode Chelex (Bite marks identification with Chelex methods in DNA extraction

    Directory of Open Access Journals (Sweden)

    Imelda Kristina Sutrisno

    2013-06-01

    Full Text Available Background: In the case of crime often encountered evidence in bite marks form that was found on the victim’s body. Generally, bitemarks identification use standard techniques that compare the interpretation picture with the tooth model of suspected person. However, sometimes the techniques do not obtain accurate results. Therefore another technique is needed to support the identification process,such as DNA analysis that use the remaining epithelium attached in saliva to identify the DNA of the suspected person. In this processes a limited DNA material could be met, not only less in quantity but also less in quality. Chelex known as one of an effective DNA extraction method in DNA forensic case is needed to overcome this problem. Purpose: The study was aimed to examine the use of Chelex as DNA extraction method on a bitemarks sample models. Methods: The blood and bitemarks of 5 persons with were taken. The DNA of each subject was exctracted with Chelex and quantified the quantity with UV Spechtrophotometer. The DNA results was amplified by PCR at locus vWA and TH01 then vizualised by electrophoresis. Results: The electrophoresis’s results showed band at locus vWA and TH01 for blood sample and bite marks with no significant differences. Conclusion: The study showed that Chelex method could be use to extract DNA from bitemarks.Latar belakang: Dalam kasus kejahatan sering dijumpai bukti dalam bentuk bekas gigitan (bitemarks yang ditemukan pada tubuh korban. Umumnya, untuk mengidentifikasi bite marks menggunakan teknik standar yaitu membandingkan foto interpretasi dengan model gigi dari orang yang dicurigai. Namun demikian teknik ini terkadang tidak mendapatkan hasil yang akurat, sehingga diperlukan teknik lain untuk menunjang keberhasilan proses identifikasi pelaku, yakni melalui analisis DNA bitemarks, yang diperoleh dari saliva yang mengandung sisa epitel tersangka pelaku. Sampel DNA yang berasal dari bitemarks umumnya terbatas, tidak hanya

  1. Non-venomous snake bite and snake bite without envenoming in a brazilian teaching hospital: analysis of 91 cases Acidentes por serpentes não-peçonhentas e acidentes por serpentes peçonhentas sem envenenamento em hospital universitário brasileiro: análise de 91 casos

    Directory of Open Access Journals (Sweden)

    Paulo Vitor Portella Silveira

    1992-12-01

    Full Text Available A retrospective survey of 473 cases of snake bite admitted to a Brazilian teaching hospital from 1984 to 1990 revealed 91 cases of bite without envenoming and/or caused by non-venomous snakes. In 17 of these cases the snake was identified, and one patient was bitten by a snake-like reptile (Amphisbaena mertensii. In 43 cases diagnosis was made on clinical grounds (fang marks in the absence of signs of envenoming. The other 30 cases were of patients who complained of being bitten but who did not show any sign of envenoming or fang mark. Most cases occurred in men (66;73%, in the 10-19 years age group (26;29%, in the lower limbs (51/74;69%, between 6 A. M. and 2 P.M. (49;61% and in the month of April (16; 18%. One patient bitten by Philodryas olfersii developed severe local pain, swelling and redness at the site of the bite, with normal clotting time. The patient bitten by Drymarcon corais was misdiagnosed as being bitten by a snake of the genus Bothrops, was given the specific antivenom, and developed anaphylaxis. One patient bitten by Sibynomorphus mikanii presented prolonged clotting time, and was also given antivenom as a case of Bothrops bite. Correct identification of venomous snakes by physicians is necessary to provide correct treatment to victims of snake bite, avoiding unnecessary distress to the patient, and overprescription of antivenom, which may eventually cause severe untoward effects.Um levantamento retrospectivo de 473 casos de acidentes ofídicos admitidos em um hospital-escola brasileiro de 1984 a 1990 revelou 91 casos sem envenenamento e/ou causados por serpentes não-peçonhentas. Em 17 casos a serpente foi identificada e um paciente foi mordido por um réptil que se assemelha às serpentes (Amphisbaena mertensii. Em 43 casos o diagnóstico foi clínico (sinal das presas na ausência de sinais de envenenamento. Os demais 30 casos foram de pacientes que se queixavam de terem sido mordidos mas que não apresentavam nem sinal de

  2. The effect of lower anterior high pull headgear on treatment of moderate open bite in adults

    Directory of Open Access Journals (Sweden)

    Rahman Showkatbakhsh

    2012-01-01

    Full Text Available Background and Aims: Various methods are used for treatment of open bite. The objective of this study was to investigate the effects of Lower Anterior High Pull Headgear (LAHPH appliance in Class I subjects with moderate open bite and high lower lip line.Materials and Methods: The study group was composed of 10 subjects with a mean age of 15.8±2.5 years and 3.05 ± 0.07 mm moderate open bite. All the patients rejected orthognathic surgery. The treatment included extraction of upper and lower second premolars followed by leveling, banding, bonding, posterior space closure, and anterior retraction. After these procedures, the open bite was reduced to 2.04±1.17 mm. Afterwards, LAHPH was applied for 18 hours per day for 8±2 months. LAHPH appliance was composed of High Pull Headgear and two hooks mounted on its inner bow. Two elastics (1.8, light, Dentaurum connected the upper hooks on the inner bow to the lower hooks on the mandibular canines vertically. The forces produced by the prescribed elastics were 10 and 60 g during mouth closing and opening, respectively. Paired T-test was used to evaluate pre-andpost-treatment outcomes.Results: The pre-and post-treatment cephalometric evaluations showed that the LAHPH reduced effectively the open bite of the patients to 0.15±1.7 mm (P<0.001.Conclusion: This appliance can be used as an acceptable method for closing the open bite in Class I subjects.

  3. Cheek-biting disorder: another stereotypic movement disorder?

    Science.gov (United States)

    Sarkhel, Sujit; Praharaj, Samir Kumar; Akhtar, Sayeed

    2011-12-01

    Recurrent cheek biting, a form of self-injurious behavior is a rare entity which presents mostly to dentists and dermatologists. We report a case of recurrent severe cheek biting in an adult male leading to mucosal ulceration. The stereotypic pattern of cheek biting and associated behavior bears striking resemblance to other impulse control disorders. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Vine snake (Thelotornis capensis bite in a dog : clinical communication

    Directory of Open Access Journals (Sweden)

    J. Otto

    2003-06-01

    Full Text Available A vine snake bite in a dog is reported. There was continued minor bleeding from the assumed nose bite site for 4 days. Currently manufactured snakebite antivenom is not effective against vine snake bites and treatment is supportive.

  5. A cost-effectiveness analysis of using TheraBite in a preventive exercise program for patients with advanced head and neck cancer treated with concomitant chemo-radiotherapy

    NARCIS (Netherlands)

    Retèl, Valesca P.; van der Molen, Lisette; Steuten, Lotte M. G.; van den Brekel, Michiel W.; Hilgers, Frans J. M.

    2016-01-01

    Previous studies have shown that a "Preventive Exercise Program" (PREP) is cost-effective compared to the standard exercise program provided in "Usual Care" (UC) in patients with advanced head and neck cancer. The current paper specifically estimates the cost-effectiveness of the TheraBite jaw

  6. A cost-effectiveness analysis of using TheraBite in a preventive exercise program for patients with advanced head and neck cancer treated with concomitant chemo-radiotherapy

    NARCIS (Netherlands)

    Retèl, V.P.; van der Molen, L.; Steuten, L.M.G.; van den Brekel, M.W.; Hilgers, F.J.M.

    2015-01-01

    Previous studies have shown that a "Preventive Exercise Program" (PREP) is cost-effective compared to the standard exercise program provided in "Usual Care" (UC) in patients with advanced head and neck cancer. The current paper specifically estimates the cost-effectiveness of the TheraBite jaw

  7. A cost-effectiveness analysis of using TheraBite in a preventive exercise program for patients with advanced head and neck cancer treated with concomitant chemo-radiotherapy

    NARCIS (Netherlands)

    Retè, Valesca P.; van der Molen, Lisette; Steuten, Lotte M.G.; van den Brekel, Michiel W.; Hilgers, Frans J.M.

    2016-01-01

    Previous studies have shown that a “Preventive Exercise Program” (PREP) is cost-effective compared to the standard exercise program provided in “Usual Care” (UC) in patients with advanced head and neck cancer. The current paper specifically estimates the cost-effectiveness of the TheraBite jaw

  8. Analysis and optimization of kinematic pair force in control rod drive mechanism

    International Nuclear Information System (INIS)

    Sun Zhenguo; Liu Sen; Ran Xiaobing; Dai Changnian; Li Yuezhong

    2015-01-01

    Function expressions of kinematic pair force with latch dimensions, friction coefficient, link angle and external load was obtained by theoretical analysis, and the expression was verified by the motion analysis software. Key parameters of kinematic pair were confirmed, and their effect trends with force of parts were obtained. They show that the available method of kinematic pair optimization is increasing the space of latch holes. Using the motion analysis software, the forces of parts before and after optimization was compared. The result shows that the forces of parts were improved after the optimization. (authors)

  9. Metabolic changes of masseter muscle in experimental unilateral bite-raised rat determined by 31P-MRS

    International Nuclear Information System (INIS)

    Nishide, Naoto

    1997-01-01

    Occlusal interference is known to alter the functional activity of masticatory muscle, but no alteration of the energy metabolism of masticatory muscle which has gone occlusal interference has been reported. The purpose of this study was to investigate the energy metabolism in rat masseter muscle during masticatory movements following unilateral bite-raising. A bite-raising splint (1 mm) was fixed on the unilateral upper molar of experimental rats, and after 2, 4 and 6 weeks, the rats were anesthetized and masticatory movements were induced by electrical stimulation applied to the masseter muscle (with a biting force of 40 g, a frequency of 5 Hz and a stimulation time of 32 min). 31 P Magnetic Resonance Spectroscopy of the masseter muscle were recorded during a sequence of rest, stimulation and recovery periods, and the resonance signal area ratio of PCr and Pi ((PCr)/(PCr + Pi)) and the muscle pH were determined. After 4 and 6 weeks following the bite-raising, the masseter of the bite-raised side showed a decrease in the (PCr)/(PCr + Pi) ratio compared with a control group during stimulation (p<0.05). Neither the bite-raised side masseter at 2 weeks and the contralateral side at 4 weeks showed any differences compared with the control. The muscle pH during stimulation was similar in both the control and the bite-raised groups of rats. These findings suggest that the occlusal alteration induced by unilateral bite-raising reduces the masseter energy level during mastication. (author)

  10. Metabolic changes of masseter muscle in experimental unilateral bite-raised rat determined by {sup 31}P-MRS

    Energy Technology Data Exchange (ETDEWEB)

    Nishide, Naoto [Kyoto Prefectural Univ. of Medicine (Japan)

    1997-05-01

    Occlusal interference is known to alter the functional activity of masticatory muscle, but no alteration of the energy metabolism of masticatory muscle which has gone occlusal interference has been reported. The purpose of this study was to investigate the energy metabolism in rat masseter muscle during masticatory movements following unilateral bite-raising. A bite-raising splint (1 mm) was fixed on the unilateral upper molar of experimental rats, and after 2, 4 and 6 weeks, the rats were anesthetized and masticatory movements were induced by electrical stimulation applied to the masseter muscle (with a biting force of 40 g, a frequency of 5 Hz and a stimulation time of 32 min). {sup 31}P Magnetic Resonance Spectroscopy of the masseter muscle were recorded during a sequence of rest, stimulation and recovery periods, and the resonance signal area ratio of PCr and Pi ((PCr)/(PCr + Pi)) and the muscle pH were determined. After 4 and 6 weeks following the bite-raising, the masseter of the bite-raised side showed a decrease in the (PCr)/(PCr + Pi) ratio compared with a control group during stimulation (p<0.05). Neither the bite-raised side masseter at 2 weeks and the contralateral side at 4 weeks showed any differences compared with the control. The muscle pH during stimulation was similar in both the control and the bite-raised groups of rats. These findings suggest that the occlusal alteration induced by unilateral bite-raising reduces the masseter energy level during mastication. (author)

  11. prevalence of biting and non-biting flies in relation to species

    African Journals Online (AJOL)

    USER

    The biting effects on resident animals and ... and second largest tourist destination in Nigeria will require concerted efforts to put in proper ... hosts from pool of available susceptible hosts (Okoth ..... communities of the lower Cross River Basin.

  12. Force-deflection analysis of offset indentations on pressurised pipes

    International Nuclear Information System (INIS)

    Hyde, T.H.; Luo, R.; Becker, A.A.

    2007-01-01

    The indenter force vs. deflection characteristics of pressurised pipes with long offset indentations under plane strain conditions have been investigated using finite element (FE) and analytical methods with four experimental tests performed on aluminium rings. Two different materials and five different geometries were used to investigate their effects on the elastic-plastic behaviour. A comparison of the experimental, FE and the analytical results indicates that the analytical formulation developed in this paper, for predicting the force-deflection curves for pressurised pipes with offset indenters, is reasonably accurate. Also, all of the analyses presented in this paper indicate that by using a representative flow stress, which is defined as the average of the yield and ultimate tensile stresses, the analytical method can accurately predict the force-deflection curves

  13. [Optimal solution and analysis of muscular force during standing balance].

    Science.gov (United States)

    Wang, Hongrui; Zheng, Hui; Liu, Kun

    2015-02-01

    The present study was aimed at the optimal solution of the main muscular force distribution in the lower extremity during standing balance of human. The movement musculoskeletal system of lower extremity was simplified to a physical model with 3 joints and 9 muscles. Then on the basis of this model, an optimum mathematical model was built up to solve the problem of redundant muscle forces. Particle swarm optimization (PSO) algorithm is used to calculate the single objective and multi-objective problem respectively. The numerical results indicated that the multi-objective optimization could be more reasonable to obtain the distribution and variation of the 9 muscular forces. Finally, the coordination of each muscle group during maintaining standing balance under the passive movement was qualitatively analyzed using the simulation results obtained.

  14. Analysis of scrams and forced outages at boiling water reactors

    International Nuclear Information System (INIS)

    Earle, R.T.; Sullivan, W.P.; Miller, K.R.; Schwegman, W.J.

    1980-07-01

    This report documents the results of a study of scrams and forced outages at General Electric Boiling Water Reactors (BWRs) operating in the United States. This study was conducted for Sandia Laboratories under a Light Water Reactor Safety Program which it manages for the United States Department of Energy. Operating plant data were used to identify the causes of scrams and forced outages. Causes of scrams and forced outages have been summarized as a function of operating plant and plant age and also ranked according to the number of events per year, outage time per year, and outage time per event. From this ranking, identified potential improvement opportunities were evaluated to determine the associated benefits and impact on plant availability

  15. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs.con.aad.aad", "size=160x600", "vpos=t", "hpos=l", "zone=public", "mcat1=de12", ]; for (var c = 0; c "); (function () { var a = "", b = [ "adid=aad-aad- ...

  16. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... Child nail care Manicure safety Nail biting Nail changes a dermatologist should examine Anti-aging skin care ...

  17. Non-biting Muscidae and control methods

    DEFF Research Database (Denmark)

    Thomas, G.; Jespersen, Jørgen B.

    1994-01-01

    Many non-biting muscids (filth flies) are characterised by the habit of visiting manure or rotting organic material to Seed and/or oviposit. As these flies also often have close associations with human beings, as well as human habitations and domestic animals, they are potentially both a nuisance...

  18. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... and nail care Nail care Nail biting "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs. ... t", "hpos=l", "zone=public", "mcat1=de12", ]; for (var c = 0; c "); (function () { var a = "", b = [ "adid= ...

  19. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Private payer Medicare physician payment MACRA implementation Alternative payment models Fee schedule State policy State policy and action ... a dermatologist Why see a board-certified dermatologist? Home Public and patients Skin, hair, and nail care Nail care Nail biting "); (function () { var a = "", b = [ " ...

  20. ANALYSIS OF CUTTING FORCES ON CNC LATHES EXPERIMENTAL APPROACH

    Directory of Open Access Journals (Sweden)

    Erdem Koç

    1996-01-01

    Full Text Available Objective of this study is to make use easy programming of CNC lathes and to achieve the optimization of part program prepared considering the limiting parameters of the machine. In the present study, a BOXFORD 250 B CNC lathe has been used for experiment and optimization process. The measurement of cutting forces exerted on the cutting tool of CNC lathe has been performed. The cutting forces occurring during the turning operation have been determined for different depth of" cut, feed rate and cutting speed as well as different cutting tools and related data base has been obtained.

  1. Snake-bite-induced Acute Kidney Injury

    International Nuclear Information System (INIS)

    Naqvi, R.

    2016-01-01

    Objective: To describe the clinical spectrum and outcome of patients presenting to a tertiary care kidney center, developing acute kidney injury (AKI) after snake-bite. Study Design: An observational study. Place and Duration of Study: Nephrology Department, Sindh Institute of Urology and Transplantation (SIUT), Karachi, from January 1990 to December 2014. Methodology: All patients coming to SIUT identified as having AKI after snake-bite during the study period were included. AKI was defined according to RIFLE criteria with sudden rise in creatinine or decline in urine output or both. Demographics, clinical presentation, laboratory profile, and final outcome was noted. Result: During the studied period, 115 cases of AKI, secondary to snake-bite, were registered at this institution. Median age of patients was 35.92 ±15.04 (range: 6 - 70) years and male to female ratio was 1.6:1. Time from bite and referral to this hospital ranged from 2 to 28 days (mean: 8.77 ±5.58 days). Oligo-anuria was the most common presentation, being found in 98 (93.90 percentage) patients. Bleeding diathesis was reported in 75 (65.21 percentage) patients on presentation. All patients had normal sized, non-obstructed kidneys on ultrasonography, with no previous comorbids. Renal replacement therapy (RRT) was required in 106 (92.17 percentage) patients. Complete recovery was seen in 59 (51.30 percentage), while 15 (13.04 percentage) patients expired during acute phase of illness, 4 (3.47 percentage) developed CKD, 11 (9.56 percentage) required dialysis beyond 90 days, and 26 (22.60 percentage) were lost to long-term follow-up. Conclusion: Snake-bite, leading to multiple complications including renal failure and death, is a major health issue in tropical countries. Late referral of these patients to specialized centres Result in undesirable outcome. (author)

  2. Factors related to stability following the surgical correction of skeletal open bite.

    Science.gov (United States)

    Ito, Goshi; Koh, Myongsun; Fujita, Tadashi; Shirakura, Maya; Ueda, Hiroshi; Tanne, Kazuo

    2014-05-01

    If a skeletal anterior open bite malocclusion is treated by orthognathic surgery directed only at the mandible, the lower jaw is repositioned upward in a counter-clockwise rotation. However, this procedure has a high risk of relapse. In the present study, the key factors associated with post-surgical stability of corrected skeletal anterior open bite malocclusions were investigated. Eighteen orthognathic patients were subjected to cephalometric analysis to assess the dental and skeletal changes following mandibular surgery for the correction of an anterior open bite. The patients were divided into two groups, determined by an increase or decrease in nasion-menton (N-Me) distance as a consequence of surgery. Changes in overbite, the displacements of molars and positional changes in Menton were evaluated immediately before and after surgery and after a minimum of one year post-operatively. The group with a decreased N-Me distance exhibited a significantly greater backward positioning of the mandible. The group with an increased N-Me distance experienced significantly greater dentoalveolar extrusion of the lower molars. A sufficient mandibular backward repositioning is an effective technique in the prevention of open bite relapse. In addition, it is important not to induce molar extrusion during post-surgical orthodontic treatment to preserve stability of the surgical open bite correction.

  3. ANTERIOR OPEN-BITE TREATMENT BY MEANS OF ZYGOMATIC MINIPLATES: A CASE REPORT

    Directory of Open Access Journals (Sweden)

    Kadir BEYCAN

    2017-01-01

    Full Text Available This case report presents the treatment of a patient with skeletal Cl II malocclusion and anterior open-bite who was treated with zygomatic miniplates through the intrusion of maxillary posterior teeth. A 16-year-old female patient with a chief complaint of anterior open-bite had a symmetric face, incompetent lips, convex profile, retrusive lower lip and chin. Intraoral examination showed that the buccal segments were in Class II relationship, and there was anterior open-bite (overbite -6.5 mm. The cephalometric analysis showed Class II skeletal relationship with increased lower facial height. The treatment plan included intrusion of the maxillary posterior teeth using zygomatic miniplates followed by fixed orthodontic treatment. At the end of treatment Class I canine and molar relationships were achieved, anterior open-bite was corrected and normal smile line was obtained. Skeletal anchorage using zygomatic miniplates is an effective method for open-bite treatment through the intrusion of maxillary posterior teeth.

  4. Vertical ground reaction force analysis during gait with unstable shoes

    Directory of Open Access Journals (Sweden)

    Giulia Pereira

    Full Text Available AbstractIntroduction Footwear is no longer just an accessory but also a protection for the musculoskeletal system, and its most important characteristic is comfort.Objectives This study aims to identify and to analyze the vertical ground reaction force in barefoot women and women with unstable shoes.Methodology Five women aged 25 ± 4 years old and mass of 50 ± 7 kg participated in this study. An AMTI force plate was used for data acquisition. The 10 trials for each situation were considered valid where the subject approached the platform with the right foot and at the speed of 4 km/h ± 5%. The instable shoe of this study is used in the practice of physical activity.Results The results showed that the first peak force was higher for the footwear situation, about 5% and significant differences between the barefoot and footwear situation. This significant difference was in the first and second peaks force and in the time of the second peak.Conclusion The values showed that the footwear absorbs approximately 45% of the impact during gait.

  5. AtomicJ: An open source software for analysis of force curves

    Science.gov (United States)

    Hermanowicz, Paweł; Sarna, Michał; Burda, Kvetoslava; Gabryś, Halina

    2014-06-01

    We present an open source Java application for analysis of force curves and images recorded with the Atomic Force Microscope. AtomicJ supports a wide range of contact mechanics models and implements procedures that reduce the influence of deviations from the contact model. It generates maps of mechanical properties, including maps of Young's modulus, adhesion force, and sample height. It can also calculate stacks, which reveal how sample's response to deformation changes with indentation depth. AtomicJ analyzes force curves concurrently on multiple threads, which allows for high speed of analysis. It runs on all popular operating systems, including Windows, Linux, and Macintosh.

  6. AtomicJ: An open source software for analysis of force curves

    International Nuclear Information System (INIS)

    Hermanowicz, Paweł; Gabryś, Halina; Sarna, Michał; Burda, Kvetoslava

    2014-01-01

    We present an open source Java application for analysis of force curves and images recorded with the Atomic Force Microscope. AtomicJ supports a wide range of contact mechanics models and implements procedures that reduce the influence of deviations from the contact model. It generates maps of mechanical properties, including maps of Young's modulus, adhesion force, and sample height. It can also calculate stacks, which reveal how sample's response to deformation changes with indentation depth. AtomicJ analyzes force curves concurrently on multiple threads, which allows for high speed of analysis. It runs on all popular operating systems, including Windows, Linux, and Macintosh

  7. Evaluation of occlusal forces in different stages of children - An exploratory study

    Directory of Open Access Journals (Sweden)

    Priya Subramaniam

    2018-01-01

    Conclusions: There was a difference in the occlusal bite force at different dentition stages. It was significantly higher in males and in the permanent dentition stage. Height and weight can be considered as predictors of occlusal bite force in older children with permanent dentition.

  8. Best Technical Approach Analysis (BTA) for Force Provider Wastewater Management

    Science.gov (United States)

    1994-07-07

    TC/ AEAGC- FMD (CONT) I L ,1 I* ATCD-SE SUBJECT: Operational Requirements Document (ORD) for the Force Provider (FP) DISTRIBUTION: (CONT) Commander...MISSION 09 OP"RATI09AL FTA "tI*E Of TNE ALTIENATIVEI ONIDPOWO ... OXIDATION P*N) OR W~AAGE LAC" (300 9900 1 1 fEE?) PERPO*M ... IWNAT ARt ?NJ PSINCIVAi

  9. Contractile Force of Human Extraocular Muscle: A Theoretical Analysis

    Directory of Open Access Journals (Sweden)

    Hongmei Guo

    2016-01-01

    Full Text Available Aim. The length-contractile force relationships of six human extraocular muscles (EOMs in primary innervations should be determined during eye movement modeling and surgery of clinical EOMs. This study aims to investigate these relationships. Method. The proposal is based on the assumption that six EOMs have similar constitutive relationships, with the eye suspended in the primary position. The constitutive relationships of EOMs are obtained by optimizing from previous experimental data and the theory of mechanical equilibrium using traditional model. Further, simulate the existing experiment of resistance force, and then compare the simulated results with the existing experimental results. Finally, the mechanical constitutive relationships of EOMs are obtained. Results. The results show that the simulated resistance forces from the other four EOMs except for the horizontal recti well agree with previous experimental results. Conclusion. The mechanical constitutive relationships of six EOMs in primary innervations are obtained, and the rationality of the constitutive relationships is verified. Whereafter, the active stress-strain relationships of the six EOMs in the primary innervations are obtained. The research results can improve the eye movement model to predict the surgical amounts of EOMs before EOM surgery more precisely.

  10. Puff and bite: the relationship between the glucocorticoid stress response and anti-predator performance in checkered puffer (Sphoeroides testudineus).

    Science.gov (United States)

    Cull, Felicia; O'Connor, Constance M; Suski, Cory D; Shultz, Aaron D; Danylchuk, Andy J; Cooke, Steven J

    2015-04-01

    Individual variation in the endocrine stress response has been linked to survival and performance in a variety of species. Here, we evaluate the relationship between the endocrine stress response and anti-predator behaviors in wild checkered puffers (Sphoeroides testudineus) captured at Eleuthera Island, Bahamas. The checkered puffer has a unique and easily measurable predator avoidance strategy, which is to inflate or 'puff' to deter potential predators. In this study, we measured baseline and stress-induced circulating glucocorticoid levels, as well as bite force, a performance measure that is relevant to both feeding and predator defence, and 'puff' performance. We found that puff performance and bite force were consistent within individuals, but generally decreased following a standardized stressor. Larger puffers were able to generate a higher bite force, and larger puffers were able to maintain a more robust puff performance following a standardized stressor relative to smaller puffers. In terms of the relationship between the glucocorticoid stress response and performance metrics, we found no relationship between post-stress glucocorticoid levels and either puff performance or bite force. However, we did find that baseline glucocorticoid levels predicted the ability of a puffer to maintain a robust puff response following a repeated stressor, and this relationship was more pronounced in larger individuals. Our work provides a novel example of how baseline glucocorticoids can predict a fitness-related anti-predator behavior. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Critical Steps in Data Analysis for Precision Casimir Force Measurements with Semiconducting Films

    Science.gov (United States)

    Banishev, A. A.; Chang, Chia-Cheng; Mohideen, U.

    2011-06-01

    Some experimental procedures and corresponding results of the precision measurement of the Casimir force between low doped Indium Tin Oxide (ITO) film and gold sphere are described. Measurements were performed using an Atomic Force Microscope in high vacuum. It is shown that the magnitude of the Casimir force decreases after prolonged UV treatment of the ITO film. Some critical data analysis steps such as the correction for the mechanical drift of the sphere-plate system and photodiodes are discussed.

  12. The influence of bubbles on the perception carbonation bite.

    Directory of Open Access Journals (Sweden)

    Paul M Wise

    Full Text Available Although many people naively assume that the bite of carbonation is due to tactile stimulation of the oral cavity by bubbles, it has become increasingly clear that carbonation bite comes mainly from formation of carbonic acid in the oral mucosa. In Experiment 1, we asked whether bubbles were in fact required to perceive carbonation bite. Subjects rated oral pungency from several concentrations of carbonated water both at normal atmospheric pressure (at which bubbles could form and at 2.0 atmospheres pressure (at which bubbles did not form. Ratings of carbonation bite under the two pressure conditions were essentially identical, indicating that bubbles are not required for pungency. In Experiment 2, we created controlled streams of air bubbles around the tongue in mildly pungent CO2 solutions to determine how tactile stimulation from bubbles affects carbonation bite. Since innocuous sensations like light touch and cooling often suppress pain, we predicted that bubbles might reduce rated bite. Contrary to prediction, air bubbles flowing around the tongue significantly enhanced rated bite, without inducing perceived bite in blank (un-carbonated solutions. Accordingly, though bubbles are clearly not required for carbonation bite, they may well modulate perceived bite. More generally, the results show that innocuous tactile stimulation can enhance chemogenic pain. Possible physiological mechanisms are discussed.

  13. Annual incidence of snake bite in rural bangladesh.

    Directory of Open Access Journals (Sweden)

    Ridwanur Rahman

    Full Text Available BACKGROUND: Snake bite is a neglected public health problem in the world and one of the major causes of mortality and morbidity in many areas, particularly in the rural tropics. It also poses substantial economic burdens on the snake bite victims due to treatment related expenditure and loss of productivity. An accurate estimate of the risk of snake bite is largely unknown for most countries in the developing world, especially South-East Asia. METHODOLOGY/PRINCIPAL FINDINGS: We undertook a national epidemiological survey to determine the annual incidence density of snake bite among the rural Bangladeshi population. Information on frequency of snake bite and individuals' length of stay in selected households over the preceding twelve months was rigorously collected from the respondents through an interviewer administered questionnaire. Point estimates and confidence intervals of the incidence density of snake bite, weighted and adjusted for the multi-stage cluster sampling design, were obtained. Out of 18,857 study participants, over one year a total of 98 snake bites, including one death were reported in rural Bangladesh. The estimated incidence density of snake bite is 623.4/100,000 person years (95% C I 513.4-789.2/100,000 person years. Biting occurs mostly when individuals are at work. The majority of the victims (71% receive snake bites to their lower extremities. Eighty-six percent of the victims received some form of management within two hours of snake bite, although only three percent of the victims went directly to either a medical doctor or a hospital. CONCLUSIONS/SIGNIFICANCE: Incidence density of snake bite in rural Bangladesh is substantially higher than previously estimated. This is likely due to better ascertainment of the incidence through a population based survey. Poor access to health services increases snake bite related morbidity and mortality; therefore, effective public health actions are warranted.

  14. An evaluation of rabies vaccination rates among canines and felines involved in biting incidents within the Wellington-Dufferin-Guelph Public Health Department.

    Science.gov (United States)

    Bottoms, K; Trotz-Williams, L; Hutchison, S; MacLeod, J; Dixon, J; Berke, O; Poljak, Z

    2014-11-01

    The objectives of this study were to determine the rate of animal bite incidents occurring in the human population of a local health department, and to determine the proportion of these canines and felines that were not up to date on their rabies vaccination at the time the incident occurred. Data were obtained from animal bite incidents reported to Wellington-Dufferin-Guelph Public Health during 2010 and 2011. Descriptive statistics of 718 eligible reports revealed the average rate of animal biting was 1.55 bites per 1000 residents per year. Approximately 54% of these animals were vaccinated against rabies, 32% were not up to date with their rabies vaccination, and the remaining 14.5% were of unknown status. The unit of analysis was the municipality, and the four outcomes of interest were: (i) number of animal bite incidents per 1000 residents, (ii) number of dog bite incidents per 1000 residents, (iii) proportion of animals involved in bite incidents that were not up to date with their rabies vaccination, and (iv) proportion of dogs that were not up to date. Associations between the outcomes and selected demographic variables were investigated using regression analysis. The number of veterinary clinics per 10,000 residents, and whether the municipality was urban or rural were identified as significant predictors for the number of animal bites per 1000 residents, and the number of dog bites. There were no significant predictors for the proportion of unvaccinated animals or dogs. Spatial clustering and the location of spatial clusters were assessed using the empirical Bayes index and spatial scan test. This analysis identified five municipalities within the health department that have a high rate of biting incidents and a high proportion of animals that were not up to date on their rabies vaccination. Such municipalities are ideal for targeted educational campaigns regarding the importance of vaccination in pets. © 2014 Blackwell Verlag GmbH.

  15. Evaluation of Snake Bites with Bedside Ultrasonography

    Directory of Open Access Journals (Sweden)

    Josef E Jolissaint

    2018-04-01

    Full Text Available History of present illness: While watering his lawn, a 36-year-old man felt two sharp bites to his bilateral ankles. He reports that he then saw a light brown, 2-foot snake slither away from him. He came to the emergency department because of pain and swelling in his ankles and inability to bear weight. Physical examination revealed bilateral ankle swelling and puncture marks on his left lateral heel and medial right ankle. Palpation, passive flexion and extension elicited severe pain bilaterally. Blood work including prothrombin time (PT, partial thromboplastin time (PTT, international normalized ratio (INR, and fibrinogen were within normal limits. Consultation with Poison Control indicated the snake was likely a copperhead, which is a venomous snake whose bites rarely require antivenin. Significant findings: In this case, ultrasonography of the lateral surface of the left foot revealed soft tissue edema (red arrow and fluid collection (white asterisk adjacent to the extensor tendon (white arrow. The edematous area resembles cobblestones, with hypoechoic areas of fluid spanning relatively hyperechoic fat lobules. The tendon is surrounded by anechoic fluid, expanding the potential space in the sheath. No hyperechoic foreign objects were noted. Discussion: The patient was diagnosed with soft tissue injury and extensor tenosynovitis after a snake envenomation. Snake venom contains metalloproteinases and other enzymatic proteins that cause local tissue edema and necrosis.1 After a snake bite, ultrasound can be used to assess for retained fangs, soft tissue edema, tendon sheath fluid, muscle fasciculation, and injury to deeper musculature that may not be readily apparent on physical exam.2,3 Most patients with tenosynovitis will recover with immobilization of the joint and non-steroidal anti-inflammatory medications.4 Rarely, the tendon may become infected requiring antibiotics and surgical intervention.4 Topics: Ultrasound, snake envenomation

  16. [Surgical management of animal bites in children].

    Science.gov (United States)

    Touzet-Roumazeille, S; Jayyosi, L; Plenier, Y; Guyot, E; Guillard, T; François, C

    2016-10-01

    Children represent a population at risk, because of their short size, their naivety and their attraction to animals. The face and hands are the most specific locations in young children. Wounds are often multiple. In more than half the cases, the child knows the animal, which are dogs and cats by frequency argument. The bite episode occurs mostly when the child is alone with the pet without direct supervision, while playing or stroking the animal. As in all bites, pediatric lesions are infectious, functional and aesthetic emergencies, but the goal of this work was primarily to make a point on principles of surgical management of animal bites in children, highlighting pediatric specificities. Animal bites require psychological, anesthetic and surgical treatment, adapted to the child, in a specialized structure. Hospitalization and general anesthesia are more frequent in children. Any suspicion of mistreatment (and/or abuse) should lead to the child's hospitalization, even if wounds do not justify monitoring in a surgical environment. Emergency surgery is essential to limit functional and aesthetic consequences. The healing capacities of the child and the frequent lack of co-morbidity allow a conservative surgical treatment with suture, repositioning skin flaps and controlled healing in the first place. Immobilization, drainage, and antibiotics will complete the surgery. The healing process, however, leads to a specific management during scar remodeling phase and growth. Psychological care of the child and parents should not be forgotten, and has to start at the same time as surgical treatment at in acute phase. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  17. A Development of Force Plate for Biomechanics Analysis of Standing and Walking

    Science.gov (United States)

    Wardoyo, S.; Hutajulu, P. T.; Togibasa, O.

    2016-08-01

    Force plates are known as an excellent teaching aid to demonstrate the kinematics and dynamics of motion and commonly used in biomechanics laboratories to measure ground forces involved in the motion of human. It is consist of a metal plate with sensors attached to give an electrical output proportional to the force on the plate. Moreover, force plates are useful for examining the kinetic characteristics of an athlete's movement. They provide information about the external forces involved in movement that can aid a coach or sports scientist to quantitatively evaluate the athlete's skill development. In this study, we develop our prototype of force plate with less than 100,- simply by using flexible force transducer attached inside rubber matt, in the form of square blocks (dimension: 250 mm × 150 mm × 10 mm), with maximum load up to 60 kg. The handmade force plate was tested by applying biomechanics analysis for standing and walking. The testing was done on Experimental Soccer Courses’ students at the Department of Physical Education, Health and Recreation, University of Cenderawasih. The design of the force plate system together with biomechanics analysis will be discussed.

  18. Analysis of Landing in Ski Jumping by Means of Inertial Sensors and Force Insoles

    Directory of Open Access Journals (Sweden)

    Veronica Bessone

    2018-02-01

    Full Text Available Landing and its preparation are important phases for performance and safety of ski jumpers. A correct ski positioning could influence the jump length as also the cushioning effect of the aerodynamic forces that permits the reduction of landing impacts. Consequently, the detection of ski angles during landing preparation could allow for analyzing landing techniques that result in reduced impact forces for the athletes. In this study, two athletes performed with force insoles and inertial sensors positioned on the ski during training conditions on the ski jumping hill. The results confirmed previous studies, showing that impact forces can reach more than four times body weight. In the analyzed cases, the force distribution resulted to be more concentrated on the forefoot and the main movement influencing the impact was the pitch. The combination of inertial sensors, in particular gyroscopes, plus force insoles demonstrated to be an interesting set up for ski jumping movement analysis.

  19. Benefit Analysis Report, United States Air Force Technical Order Management Systems (AFTOMS)

    Science.gov (United States)

    1989-08-01

    This report prepared by the Transportation Systems Center (TSC) concludes an analysis of the Technical Order (TO) costs and benefits, which was originally undertaken as part of the US Air Force Computer-aided Acquisition and Logistics Support (CALS) ...

  20. Nano Scale Mechanical Analysis of Biomaterials Using Atomic Force Microscopy

    Science.gov (United States)

    Dutta, Diganta

    The atomic force microscope (AFM) is a probe-based microscope that uses nanoscale and structural imaging where high resolution is desired. AFM has also been used in mechanical, electrical, and thermal engineering applications. This unique technique provides vital local material properties like the modulus of elasticity, hardness, surface potential, Hamaker constant, and the surface charge density from force versus displacement curve. Therefore, AFM was used to measure both the diameter and mechanical properties of the collagen nanostraws in human costal cartilage. Human costal cartilage forms a bridge between the sternum and bony ribs. The chest wall of some humans is deformed due to defective costal cartilage. However, costal cartilage is less studied compared to load bearing cartilage. Results show that there is a difference between chemical fixation and non-chemical fixation treatments. Our findings imply that the patients' chest wall is mechanically weak and protein deposition is abnormal. This may impact the nanostraws' ability to facilitate fluid flow between the ribs and the sternum. At present, AFM is the only tool for imaging cells' ultra-structure at the nanometer scale because cells are not homogeneous. The first layer of the cell is called the cell membrane, and the layer under it is made of the cytoskeleton. Cancerous cells are different from normal cells in term of cell growth, mechanical properties, and ultra-structure. Here, force is measured with very high sensitivity and this is accomplished with highly sensitive probes such as a nano-probe. We performed experiments to determine ultra-structural differences that emerge when such cancerous cells are subject to treatments such as with drugs and electric pulses. Jurkat cells are cancerous cells. These cells were pulsed at different conditions. Pulsed and non-pulsed Jurkat cell ultra-structures were investigated at the nano meter scale using AFM. Jurkat cell mechanical properties were measured under

  1. Biting back: BiTE antibodies as a promising therapy for acute myeloid leukemia.

    Science.gov (United States)

    Walter, Roland B

    2014-06-01

    The experience with gemtuzumab ozogamicin has highlighted both the potential value and limitations of antibodies in acute myeloid leukemia (AML). Recently, bispecific T-cell engager (BiTE) antibodies have emerged as a means to harness polyclonal cytotoxic T-cells and cause highly efficient lysis of targeted tumor cells. Promising early results have been obtained with the CD19-directed BiTE antibody, blinatumomab, in patients with acute lymphoblastic leukemia. A first candidate for AML is the CD33/CD3 molecule, AMG 330, for which several recent preclinical studies demonstrated high potency and efficacy in destroying CD33(+) human AML cells. Many questions remain to be addressed, but BiTE antibodies may offer an exciting new tool in a disease for which the outcomes in many patients remain unsatisfactory.

  2. An Integrated Strategy Framework (ISF) for Combining Porter's 5-Forces, Diamond, PESTEL, and SWOT Analysis

    OpenAIRE

    Anton, Roman

    2015-01-01

    INTRODUCTION Porter's Five-Forces, Porter's Diamond, PESTEL, the 6th-Forths, and Humphrey's SWOT analysis are among the most important and popular concepts taught in business schools around the world. A new integrated strategy framework (ISF) combines all major concepts. PURPOSE Porter's Five-Forces, Porter's Diamond, PESTEL, the 6th-Forths, and Humphrey's SWOT analysis are among the most important and popular concepts taught in business schools around the world. A new integrated strategy fr...

  3. First Pediatric Case of Tularemia after a Coyote Bite

    Directory of Open Access Journals (Sweden)

    Bruno B. Chomel

    2016-01-01

    Full Text Available Bite-transmitted tularemia is a rare event in humans and most of the cases have been associated with cat bites. We report the first pediatric case of tularemia caused by a coyote (Canis latrans bite. Coyotes can be healthy carriers of Francisella tularensis and transmit this infectious agent through a bite. Pediatricians should be aware of this risk after a carnivore bite and implement appropriate antibiotic therapy, as amoxicillin/clavulanate potassium (Augmentin may have prolonged the typical two to three days’ incubation period commonly observed for tularemia after an animal bite and was not effective in preventing clinical signs in this child. Finally, it emphasizes again the importance of early and late serum samples for appropriate serodiagnostic.

  4. An Analysis of the Cost Accounting System for the Depot Maintenance Service, Air Force Industrial Fund.

    Science.gov (United States)

    1987-09-01

    AN A NALYSIS OF THE COST ACCOUNTING SYSTEM FOR THE DEPOT 1/1 MRINTENANCE SERVI..(U) MIR FORCE INST OF TECH IIGHT-PTTERSON RFB OH SCHOOL OF SYST.. 0 L...I "VV h S~ ~~i FiLE COV, THSI CIO ~OF AN ANALYSIS OF THE COST ACCOUNTING SYSTEM FOR THE DEPOT MAINTENANCE SERVICE, AIR FORCE INDUSTRIAL FUND...Patterson Air Force Base, Ohio ~ p~UOW~~ ’ I ~ 1 12 02 0 AFIT/GLM/LSY/87S-83 AN ANALYSIS OF THE COST ACCOUNTING SYSTEM FOR THE DEPOT MAINTENANCE SERVICE, AIR

  5. Biochemical analysis of force-sensitive responses using a large-scale cell stretch device.

    Science.gov (United States)

    Renner, Derrick J; Ewald, Makena L; Kim, Timothy; Yamada, Soichiro

    2017-09-03

    Physical force has emerged as a key regulator of tissue homeostasis, and plays an important role in embryogenesis, tissue regeneration, and disease progression. Currently, the details of protein interactions under elevated physical stress are largely missing, therefore, preventing the fundamental, molecular understanding of mechano-transduction. This is in part due to the difficulty isolating large quantities of cell lysates exposed to force-bearing conditions for biochemical analysis. We designed a simple, easy-to-fabricate, large-scale cell stretch device for the analysis of force-sensitive cell responses. Using proximal biotinylation (BioID) analysis or phospho-specific antibodies, we detected force-sensitive biochemical changes in cells exposed to prolonged cyclic substrate stretch. For example, using promiscuous biotin ligase BirA* tagged α-catenin, the biotinylation of myosin IIA increased with stretch, suggesting the close proximity of myosin IIA to α-catenin under a force bearing condition. Furthermore, using phospho-specific antibodies, Akt phosphorylation was reduced upon stretch while Src phosphorylation was unchanged. Interestingly, phosphorylation of GSK3β, a downstream effector of Akt pathway, was also reduced with stretch, while the phosphorylation of other Akt effectors was unchanged. These data suggest that the Akt-GSK3β pathway is force-sensitive. This simple cell stretch device enables biochemical analysis of force-sensitive responses and has potential to uncover molecules underlying mechano-transduction.

  6. Open Fracture of the Forearm Bones due to Horse Bite

    OpenAIRE

    Santoshi, John Ashutosh; Leshem, Lall

    2014-01-01

    Introduction: Fractures have been described mainly following falling accidents in horse-related injuries. Horse bites are uncommon accidents. We present a case of open fracture of the forearm due to horse bite. Case Report: A 35-year-old male farm-worker presented to the emergency room with alleged history of horse bite to the right forearm about 2 hours prior to presentation while feeding the horse. There was deformity of the forearm with multiple puncture wounds, deep abrasions and small...

  7. Revised Chapman-Enskog analysis for a class of forcing schemes in the lattice Boltzmann method.

    Science.gov (United States)

    Li, Q; Zhou, P; Yan, H J

    2016-10-01

    In the lattice Boltzmann (LB) method, the forcing scheme, which is used to incorporate an external or internal force into the LB equation, plays an important role. It determines whether the force of the system is correctly implemented in an LB model and affects the numerical accuracy. In this paper we aim to clarify a critical issue about the Chapman-Enskog analysis for a class of forcing schemes in the LB method in which the velocity in the equilibrium density distribution function is given by u=∑_{α}e_{α}f_{α}/ρ, while the actual fluid velocity is defined as u[over ̂]=u+δ_{t}F/(2ρ). It is shown that the usual Chapman-Enskog analysis for this class of forcing schemes should be revised so as to derive the actual macroscopic equations recovered from these forcing schemes. Three forcing schemes belonging to the above class are analyzed, among which Wagner's forcing scheme [A. J. Wagner, Phys. Rev. E 74, 056703 (2006)10.1103/PhysRevE.74.056703] is shown to be capable of reproducing the correct macroscopic equations. The theoretical analyses are examined and demonstrated with two numerical tests, including the simulation of Womersley flow and the modeling of flat and circular interfaces by the pseudopotential multiphase LB model.

  8. Formula for Forced Vibration Analysis of Structures Using Static ...

    African Journals Online (AJOL)

    Some methods of dynamic analysis are based on using static factored response ... on a false assumption of direct linear variation in the stress-displacement relationship. Based on the flexible frame model and stiffness formulation a formula for ...

  9. Report and analysis of the BULLION forced-gradient experiment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The BULLION Forced-Gradient Experiment (FGE) was conducted in the summer of 1997, starting June 2 and ending August 28. The site of the experiment was the ER-20-6 well field adjacent to the BULLION test. Figure 1-1 shows the location of this site on Pahute Mesa in Area 20 of the Nevada Test Site. Figure 1-2 shows the ER-20-6 site within the Pahute Mesa hydrogeologic framework, and Figure 1-3 shows the site layout with respect to the BULLION test. The purpose of the BULLION FGE was to provide information relevant to the transport of radionuclides in groundwater. Transport of radionuclides from Pahute Mesa is of special concern due to the potential for rapid movement of groundwater in the fractured volcanic rocks comprising the Mesa and formations along the anticipated downgradient path of groundwater. The objective was specifically to observe the transport process and characterize transport parameters (e.g., effective porosity, dispersivity and matrix diffusion) for use in predictive modeling of contaminant transport. Additional objectives were to characterize the hydrologic source term and the relative mobility of mobile radionuclides.

  10. Probabilistic analysis for identifying the driving force of protein folding

    Science.gov (United States)

    Tokunaga, Yoshihiko; Yamamori, Yu; Matubayasi, Nobuyuki

    2018-03-01

    Toward identifying the driving force of protein folding, energetics was analyzed in water for Trp-cage (20 residues), protein G (56 residues), and ubiquitin (76 residues) at their native (folded) and heat-denatured (unfolded) states. All-atom molecular dynamics simulation was conducted, and the hydration effect was quantified by the solvation free energy. The free-energy calculation was done by employing the solution theory in the energy representation, and it was seen that the sum of the protein intramolecular (structural) energy and the solvation free energy is more favorable for a folded structure than for an unfolded one generated by heat. Probabilistic arguments were then developed to determine which of the electrostatic, van der Waals, and excluded-volume components of the interactions in the protein-water system governs the relative stabilities between the folded and unfolded structures. It was found that the electrostatic interaction does not correspond to the preference order of the two structures. The van der Waals and excluded-volume components were shown, on the other hand, to provide the right order of preference at probabilities of almost unity, and it is argued that a useful modeling of protein folding is possible on the basis of the excluded-volume effect.

  11. Analysis of Air Force Wartime Contracted Construction Project Performance

    Science.gov (United States)

    2015-03-26

    KPIs ) identified in current literature. Chan’s meta-analysis of KPIs found that time and cost are the primary objective indicators of a successful...Smith, Currie & Hancock, 2009). 46 Key performance indicators ( KPI ) were also used as input factors to analyze differences between contracts...Chan, et al. (2002) performed a meta-analysis of KPIs , as determined by construction researchers. They found that the most predictive performance

  12. Management of Poisonous Snake Bites in Southern Taiwan

    Directory of Open Access Journals (Sweden)

    Kao-Ping Chang

    2007-10-01

    Full Text Available Snake bite envenomation is not uncommon in Taiwan. This study focuses on the pattern of poisonous snake bites and their management in southern Taiwan over a 5-year period. The case histories of 37 patients with poisonous snake bites admitted to the Kaohsiung Medical University Hospital between June 2001 and July 2005 were analyzed retrospectively. Three patients, bitten by unknown species of venomous snakes, were excluded from this study. The frequency of snake bites from each species of snake, the local and systemic manifestations of snake bite, treatment of complications and final outcomes were analyzed. Of the remaining 34 patients, 11 (32.4% were bitten by bamboo vipers, 10 (29.4% by Russell's pit vipers, 8 (23.5% by Taiwan cobras and 5 (14.7% by Taiwan Habu. The majority of snake bites (28 occurred between May and November. Those affected were mainly outdoor hikers (14 and workers (9. The antivenin requirements for treatment in the emergency room were in accordance with standard procedures. No mortality was noted among those envenomed by poisonous snakes. Although poisonous snake bite is not a common life-threatening emergency in the study area, we observed both an environmental risk and a seasonal incidence of snake bite. Keeping the varied clinical manifestations of snake bite in mind is important for effective management. Ready availability and appropriate use of antivenin, close monitoring of patients, institution of ventilatory support and early referral to a larger hospital when required, all help reduce mortality.

  13. A qualitative investigation of the perceptions of female dog-bite victims and implications for the prevention of dog bites

    OpenAIRE

    Westgarth, Carri; Watkins, Francine

    2015-01-01

    Preventing dog bites is an increasingly important public health and political issue with implications for both human and animal health and welfare. Expert opinion is that most bites are preventable. Intervention materials have been designed to educate people on how to assess the body language of dogs, evaluate risk, and take appropriate action. The effectiveness of this approach is rarely evaluated and the incidence of dog bites is thought to be increasing. Is the traditional approach to dog ...

  14. Survival Analysis of US Air Force Officer Retention Rate

    Science.gov (United States)

    2017-03-23

    an independent global business research organization] has studied the timing of unemployment… the timing of this variable is designated as...retrieval, and management; report writing and graphics design; statistical and mathematical analysis; business forecasting and decision support; operations...less flexible to experimentation with the system’s variables and assumptions. Today , many researchers utilize simulation to model real world

  15. Genome-wide association study of insect bite hypersensitivity in two horse populations in the Netherlands

    NARCIS (Netherlands)

    Schurink, A.; Wolc, A.; Ducro, B.J.; Frankena, K.; Garrick, D.J.; Dekkers, J.C.M.; Arendonk, van J.A.M.

    2012-01-01

    Background: Insect bite hypersensitivity is a common allergic disease in horse populations worldwide. Insect bite hypersensitivity is affected by both environmental and genetic factors. However, little is known about genes contributing to the genetic variance associated with insect bite

  16. Functional morphology and biomechanics of the tongue-bite apparatus in salmonid and osteoglossomorph fishes

    Science.gov (United States)

    Camp, Ariel L; Konow, Nicolai; Sanford, Christopher P J

    2009-01-01

    The tongue-bite apparatus and its associated musculoskeletal elements of the pectoral girdle and neurocranium form the structural basis of raking, a unique prey-processing behaviour in salmonid and osteoglossomorph fishes. Using a quantitative approach, the functional osteology and myology of this system were compared between representatives of each lineage, i.e. the salmonid Salvelinus fontinalis (N =10) and the osteoglossomorph Chitala ornata(N = 8). Divergence was found in the morphology of the novel cleithrobranchial ligament, which potentially relates to kinematic differences between the raking lineage representatives. Salvelinus had greater anatomical cross-sectional areas of the epaxial, hypaxial and protractor hyoideus muscles, whereas Chitala had greater sternohyoideus and adductor mandibulae mass. Two osteology-based biomechanical models (a third-order lever for neurocranial elevation and a modified four-bar linkage for hyoid retraction) showed divergent force/velocity priorities in the study taxa. Salvelinus maximizes both force (via powerful cranial muscles) and velocity (through mechanical amplification) during raking. In contrast, Chitala has relatively low muscle force but more efficient force transmission through both mechanisms compared with Salvelinus. It remains unclear if and how behavioural modulation and specializations in the post-cranial anatomy may affect the force/velocity trade-offs in Chitala. Further studies of tongue-bite apparatus morphology and biomechanics in a broader species range may help to clarify the role that osteology and myology play in the evolution of behavioural diversity. PMID:19438765

  17. Does Flywheel Paradigm Training Improve Muscle Volume and Force? A Meta-Analysis.

    Science.gov (United States)

    Nuñez Sanchez, Francisco J; Sáez de Villarreal, Eduardo

    2017-11-01

    Núñez Sanchez, FJ and Sáez de Villarreal, E. Does flywheel paradigm training improve muscle volume and force? A meta-analysis. J Strength Cond Res 31(11): 3177-3186, 2017-Several studies have confirmed the efficacy of flywheel paradigm training for improving or benefiting muscle volume and force. A meta-analysis of 13 studies with a total of 18 effect sizes was performed to analyse the role of various factors on the effectiveness of flywheel paradigm training. The following inclusion criteria were employed for the analysis: (a) randomized studies; (b) high validity and reliability instruments; (c) published in a high quality peer-reviewed journal; (d) healthy participants; (e) studies where the eccentric programme were described; and (f) studies where increases in muscle volume and force were measured before and after training. Increases in muscle volume and force were noted through the use of flywheel systems during short periods of training. The increase in muscle mass appears was not influenced by the existence of eccentric overload during the exercise. The increase in force was significantly higher with the existence of eccentric overload during the exercise. The responses identified in this analysis are essential and should be considered by strength and conditioning professionals regarding the most appropriate dose response trends for flywheel paradigm systems to optimize the increase in muscle volume and force.

  18. Perawatan Maloklusi Angle Klas I dengan Gigi Depan Crowding Berat dan Cross Bite Menggunakan Teknik Begg pada Pasien dengan Kebersihan Mulut Buruk

    Directory of Open Access Journals (Sweden)

    Sri Wahyuningsih

    2014-12-01

    Full Text Available Gigi depan crowding/berjejal parah dan cross bite adalah kasus yang sering dijumpai pada perawatan ortodontik. Gigi crowding dapat menyulitkan membersihkan mulut pada area gigi crowding sehingga dapat menyebabkan masalah periodontal. Salah satu keuntungan perawatan ortodontik cekat dengan teknik Begg adalah menghasilkan gaya yang ringan dalam megkoreksi gigi berjejal dan cross bite dapat memberikan kenyamanan pada pasien. Tujuan perawatan ini adalah untuk mengkoreksi gigi berjejal dan cross bite dalam waktu yang singkat menggunakan teknik Begg. Seorang pasien wanita umur 24 tahun dengan maloklusi Angle klas I dan skeletal klas III protrusif mandibula, gigi depan crowding berat dan cross bite, konstraksi lengkung pada kedua rahang, pergeseran median line rahang atas dan bawah disertai, gingivitis berat dan karies. Skaling, perawatan saluran akar dan pencabutan gigi non vital dilakukan sebelum perawatan ortodontik dilakukan. Koreksi dengan teknik Begg memerlukan waktu selama 6 bulan untuk mengkoreksi gigi crowding dan cross bite semuanya dalam waktu yang sama. Koreksi kasus gigi depan crowding berat dan cross bite disertai masalah periodontal dapat dilakukan dengan teknik Begg dalam waktu yang singkat dengan kemajuan yang bagus.   Treatment of Class I Angle Malocclusion with Severe Crowding and Crossbite of Anterior Teeth Using Begg Technique in Bad Oral Hygiene Patient. The severe crowding and cross bite of anterior teeth were very common type cases in orthodontic. Crowding teeth compromised the oral hygiene due to the difficulty in oral cleansing on the crowding area that cause periodontal problem. One of advantages of fixed orthodontic treatment using Begg technique produced the light forces in correcting crowding and cross bite could give convenience to patients. The purpose of this treatment is to correct crowding and cross bite in a short period of time using Begg technique. A 24 years old female patient with Class I Angle

  19. Nonlinear Transient Thermal Analysis by the Force-Derivative Method

    Science.gov (United States)

    Balakrishnan, Narayani V.; Hou, Gene

    1997-01-01

    High-speed vehicles such as the Space Shuttle Orbiter must withstand severe aerodynamic heating during reentry through the atmosphere. The Shuttle skin and substructure are constructed primarily of aluminum, which must be protected during reentry with a thermal protection system (TPS) from being overheated beyond the allowable temperature limit, so that the structural integrity is maintained for subsequent flights. High-temperature reusable surface insulation (HRSI), a popular choice of passive insulation system, typically absorbs the incoming radiative or convective heat at its surface and then re-radiates most of it to the atmosphere while conducting the smallest amount possible to the structure by virtue of its low diffusivity. In order to ensure a successful thermal performance of the Shuttle under a prescribed reentry flight profile, a preflight reentry heating thermal analysis of the Shuttle must be done. The surface temperature profile, the transient response of the HRSI interior, and the structural temperatures are all required to evaluate the functioning of the HRSI. Transient temperature distributions which identify the regions of high temperature gradients, are also required to compute the thermal loads for a structural thermal stress analysis. Furthermore, a nonlinear analysis is necessary to account for the temperature-dependent thermal properties of the HRSI as well as to model radiation losses.

  20. Geographic variation in access to dog-bite care in Pakistan and risk of dog-bite exposure in Karachi: prospective surveillance using a low-cost mobile phone system.

    Directory of Open Access Journals (Sweden)

    Syed Mohammad Asad Zaidi

    Full Text Available BACKGROUND: Dog-bites and rabies are under-reported in developing countries such as Pakistan and there is a poor understanding of the disease burden. We prospectively collected data utilizing mobile phones for dog-bite and rabies surveillance across nine emergency rooms (ER in Pakistan, recording patient health-seeking behaviors, access to care and analyzed spatial distribution of cases from Karachi. METHODOLOGY AND PRINCIPAL FINDINGS: A total of 6212 dog-bite cases were identified over two years starting in February 2009 with largest number reported from Karachi (59.7%, followed by Peshawar (13.1% and Hyderabad (11.4%. Severity of dog-bites was assessed using the WHO classification. Forty percent of patients had Category I (least severe bites, 28.1% had Category II bites and 31.9% had Category III (most severe bites. Patients visiting a large public hospital ER in Karachi were least likely to seek immediate healthcare at non-medical facilities (Odds Ratio = 0.20, 95% CI 0.17-0.23, p-value<0.01, and had shorter mean travel time to emergency rooms, adjusted for age and gender (32.78 min, 95% CI 31.82-33.78, p-value<0.01 than patients visiting hospitals in smaller cities. Spatial analysis of dog-bites in Karachi suggested clustering of cases (Moran's I = 0.02, p value<0.01, and increased risk of exposure in particular around Korangi and Malir that are adjacent to the city's largest abattoir in Landhi. The direct cost of operating the mHealth surveillance system was USD 7.15 per dog-bite case reported, or approximately USD 44,408 over two years. CONCLUSIONS: Our findings suggest significant differences in access to care and health-seeking behaviors in Pakistan following dog-bites. The distribution of cases in Karachi was suggestive of clustering of cases that could guide targeted disease-control efforts in the city. Mobile phone technologies for health (mHealth allowed for the operation of a national-level disease reporting and surveillance system

  1. [Case report: Snake bite - an odd case].

    Science.gov (United States)

    Evers, Bettina; Muth, Claus-Martin; Georgieff, Michael; Dinse-Lambracht, Alexander

    2015-10-01

    Emergency medical service is called by a 54-year-old man bitten by his rattlesnake. Upon initial survey we find the patient in a cardiopulmonary stable condition. He has bite marks and pain on his rapidly swelling middle finger of his right hand. Our initial treatment is immobilization of the patient. The snake raiser has already called the poison control center in Munich. By the help of this institution we bring him to a hospital having the right antivenom on hand. © Georg Thieme Verlag Stuttgart · New York.

  2. Measurement and analysis of thrust force in drilling sisal-glass fiber reinforced polymer composites

    Science.gov (United States)

    Ramesh, M.; Gopinath, A.

    2017-05-01

    Drilling of composite materials is difficult when compared to the conventional materials because of its in-homogeneous nature. The force developed during drilling play a major role in the surface quality of the hole and minimizing the damages around the surface. This paper focuses the effect of drilling parameters on thrust force in drilling of sisal-glass fiber reinforced polymer composite laminates. The quadratic response models are developed by using response surface methodology (RSM) to predict the influence of cutting parameters on thrust force. The adequacy of the models is checked by using the analysis of variance (ANOVA). A scanning electron microscope (SEM) analysis is carried out to analyze the quality of the drilled surface. From the results, it is found that, the feed rate is the most influencing parameter followed by spindle speed and the drill diameter is the least influencing parameter on the thrust force.

  3. Correlations between dentoskeletal variables and deep bite in Class II Division 1 individuals

    Directory of Open Access Journals (Sweden)

    Leandro Silva Marques

    2011-02-01

    Full Text Available This study aimed to evaluate the cephalometric pattern of Class II Division 1 individuals with deep bite, and to determine possible correlations between dentoskeletal variables and deep bite. Comparisons were also made between genders and cases that were to be treated both with and without premolar extraction. A total of 70 lateral cephalograms were used, from both male (n = 35 and female (n = 35 individuals with an average age of 11.6 years, who simultaneously presented with ANB > 5º and overbite > 4 mm. Statistical analysis involved parametric (t-test and non-parametric (Mann-Whitney tests for independent samples, as well as the Spearman correlation test (p < 0.05. The values of Go-Me, Ar-Pog, PM-1 and PM-CMI were higher in males (p < 0.05. However, no significant differences were found among the averages of the cephalometric measurements when the sample was divided by treatment with and without extraction. Deep bite was positively correlated to the PM-1 and SNA measurements, and negatively correlated to the Go-Me, Ar-Pog, SNB and SNGoMe measurements. The main factors associated with the determination of deep bite in Angle's Class II Division 1 cases were: greater lower anterior dentoalveolar growth and/or lower incisor extrusion, horizontal growth pattern, maxillary protrusion and mandibular retrusion.

  4. Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

    Science.gov (United States)

    2007-05-01

    BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...m3 micrograms per cubic meter US United States USACE United States Army Corp of Engineers USC United States Code USCB United States Census Bureau...effects and annoyance in that very few flight operations and ground engine runs occur between 2200 hours and 0700 hours. BMPs include restricting the

  5. BFPTool: a software tool for analysis of Biomembrane Force Probe experiments

    Czech Academy of Sciences Publication Activity Database

    Šmít, Daniel; Fouquet, C.; Doulazmi, M.; Pincet, F.; Trembleau, A.; Zápotocký, Martin

    2017-01-01

    Roč. 10, Feb (2017), č. článku 2. ISSN 2046-1682 R&D Projects: GA ČR(CZ) GA14-16755S; GA MŠk(CZ) 7AMB12FR002 Institutional support: RVO:67985823 Keywords : Biomembrane Force Probe * motion tracking * image analysis * force spectroscopy * cell mechanics Subject RIV: BO - Biophysics OBOR OECD: Biophysics Impact factor: 2.292, year: 2016

  6. HF Propagation sensitivity study and system performance analysis with the Air Force Coverage Analysis Program (AFCAP)

    Science.gov (United States)

    Caton, R. G.; Colman, J. J.; Parris, R. T.; Nickish, L.; Bullock, G.

    2017-12-01

    The Air Force Research Laboratory, in collaboration with NorthWest Research Associates, is developing advanced software capabilities for high fidelity simulations of high frequency (HF) sky wave propagation and performance analysis of HF systems. Based on the HiCIRF (High-frequency Channel Impulse Response Function) platform [Nickisch et. al, doi:10.1029/2011RS004928], the new Air Force Coverage Analysis Program (AFCAP) provides the modular capabilities necessary for a comprehensive sensitivity study of the large number of variables which define simulations of HF propagation modes. In this paper, we report on an initial exercise of AFCAP to analyze the sensitivities of the tool to various environmental and geophysical parameters. Through examination of the channel scattering function and amplitude-range-Doppler output on two-way propagation paths with injected target signals, we will compare simulated returns over a range of geophysical conditions as well as varying definitions for environmental noise, meteor clutter, and sea state models for Bragg backscatter. We also investigate the impacts of including clutter effects due to field-aligned backscatter from small scale ionization structures at varied levels of severity as defined by the climatologically WideBand Model (WBMOD). In the absence of additional user provided information, AFCAP relies on International Reference Ionosphere (IRI) model to define the ionospheric state for use in 2D ray tracing algorithms. Because the AFCAP architecture includes the option for insertion of a user defined gridded ionospheric representation, we compare output from the tool using the IRI and ionospheric definitions from assimilative models such as GPSII (GPS Ionospheric Inversion).

  7. Three-dimensional imaging of human cutaneous forearm bite marks in human volunteers over a 4 day period.

    Science.gov (United States)

    de Sainte Croix, M M; Gauld, D; Forgie, A H; Lowe, R

    2016-05-01

    Human bite marks are often sustained during sexual, domestic or child abuse. Currently, analysis of these marks involves digital photography techniques along with an expert forensic odontologist opinion. Photographs often focus closely on the bite mark and give little context to the anatomical location of the injury. Due to variation in camera models and expertise of the photographer, photograph quality can affect its interpretation. Additionally, it can sometimes be days between injury and examination, allowing the injury pattern and colour to alter, making it harder to analyse. To investigate if a 3D imaging technique, creating a time-lapse image of a bite mark in three dimensions, can provide context to the injury in terms of nature and location, and also allow analysis of the change in appearance of a bite mark over time. Participants had an experimental bite mark produced on their forearm by dental casts mounted on a dental articulator. The forearms were photographed immediately following the bite, and at intervals of 3, 6, 24, 48, 72 and 96 h. A DI3D(®) (Dimensional Imaging 3D) photogrammetry system and Autodesk Maya 2015(®) software was used to create a 3D animation from the images obtained. The clearest, long lasting bite mark injuries were selected for animation, enabling the 3D imaging technique to be used optimally. 3D time-lapse animations were successfully created with the ability to be viewed on most electronic devices. With further refinement this technique could be valuable in a number of areas. We anticipate animations produced in this way to have significant benefit to the presentation of photographic evidence in a court setting, and in age estimation of injuries. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  8. The statistical analysis of the mobility and the labor force use

    Directory of Open Access Journals (Sweden)

    Daniela-Emanuela Dãnãcicã

    2006-05-01

    Full Text Available The paper approaches some of the classical methods used in statistics for theanalysis of labor force and proposes new ways of current analysis required foradopting optimal economic patterns and strategies. The proposed methods, thelinear mean deviation used in the analysis of the external mobility of the laborforce, the coefficient of variation used in the analysis of the external mobility of thelabor force and two-dimensional table used the coefficient of internal mobilitycalculation, are illustrated by the premises, the calculus methodology, practicalapplications and guidance for their use in adopting and applying optimal economicpolicy.

  9. On Gait Analysis Estimation Errors Using Force Sensors on a Smart Rollator.

    Science.gov (United States)

    Ballesteros, Joaquin; Urdiales, Cristina; Martinez, Antonio B; van Dieën, Jaap H

    2016-11-10

    Gait analysis can provide valuable information on a person's condition and rehabilitation progress. Gait is typically captured using external equipment and/or wearable sensors. These tests are largely constrained to specific controlled environments. In addition, gait analysis often requires experts for calibration, operation and/or to place sensors on volunteers. Alternatively, mobility support devices like rollators can be equipped with onboard sensors to monitor gait parameters, while users perform their Activities of Daily Living. Gait analysis in rollators may use odometry and force sensors in the handlebars. However, force based estimation of gait parameters is less accurate than traditional methods, especially when rollators are not properly used. This paper presents an evaluation of force based gait analysis using a smart rollator on different groups of users to determine when this methodology is applicable. In a second stage, the rollator is used in combination with two lab-based gait analysis systems to assess the rollator estimation error. Our results show that: (i) there is an inverse relation between the variance in the force difference between handlebars and support on the handlebars-related to the user condition-and the estimation error; and (ii) this error is lower than 10% when the variation in the force difference is above 7 N. This lower limit was exceeded by the 95.83% of our challenged volunteers. In conclusion, rollators are useful for gait characterization as long as users really need the device for ambulation.

  10. On Gait Analysis Estimation Errors Using Force Sensors on a Smart Rollator

    Directory of Open Access Journals (Sweden)

    Joaquin Ballesteros

    2016-11-01

    Full Text Available Gait analysis can provide valuable information on a person’s condition and rehabilitation progress. Gait is typically captured using external equipment and/or wearable sensors. These tests are largely constrained to specific controlled environments. In addition, gait analysis often requires experts for calibration, operation and/or to place sensors on volunteers. Alternatively, mobility support devices like rollators can be equipped with onboard sensors to monitor gait parameters, while users perform their Activities of Daily Living. Gait analysis in rollators may use odometry and force sensors in the handlebars. However, force based estimation of gait parameters is less accurate than traditional methods, especially when rollators are not properly used. This paper presents an evaluation of force based gait analysis using a smart rollator on different groups of users to determine when this methodology is applicable. In a second stage, the rollator is used in combination with two lab-based gait analysis systems to assess the rollator estimation error. Our results show that: (i there is an inverse relation between the variance in the force difference between handlebars and support on the handlebars—related to the user condition—and the estimation error; and (ii this error is lower than 10% when the variation in the force difference is above 7 N. This lower limit was exceeded by the 95.83% of our challenged volunteers. In conclusion, rollators are useful for gait characterization as long as users really need the device for ambulation.

  11. Study on force mechanism for therapeutic effect of pushing manipulation with one-finger meditation base on similarity analysis of force and waveform.

    Science.gov (United States)

    Fang, Lei; Fang, Min; Guo, Min-Min

    2016-12-27

    To reveal the force mechanism for therapeutic effect of pushing manipulation with one-finger meditation. A total of 15 participants were recruited in this study and assigned to an expert group, a skilled group and a novice group, with 5 participants in each group. Mechanical signals were collected from a biomechanical testing platform, and these data were further observed via similarity analysis and cluster analysis. Comparing the force waveforms of manipulation revealed that the manipulation forces were similar between the expert group and the skilled group (P>0.05). The mean value of vertical force was 9.8 N, and 95% CI rang from 6.37 to 14.70 N, but there were significant differences compared with the novice group (PPushing manipulation with one-finger meditation is a kind of light stimulation manipulation on the acupoint, and force characteristics of double waveforms continuously alternated during manual operation.

  12. Bullous reactions to bed bug bites reflect cutaneous vasculitis

    Science.gov (United States)

    This study evaluates bullous cutaneous reactions and sequential histopathology in an individual sensitized to bed bug bites in an effort to better understand the allergic response and histology associated with these bites. There was a progression of the inflammatory response across time ranging from...

  13. Retrospective study of dog bite cases reported to ECWA Veterinary ...

    African Journals Online (AJOL)

    A retrospective study of dog bite cases reported to ECWA Veterinary Clinic Bukuru was carried out in Plateau State, Nigeria to understand the pattern of occurrence in this region. A total of two hundred and forty seven (247) dog bite cases were reported between May, 2009 and June, 2010. The dogs profile showed that ...

  14. Dog bite as a public health concern in Addis Ababa

    African Journals Online (AJOL)

    Bernt Lindtjørn

    Dog bite as a public health concern in Addis Ababa. Fasil Mengistu1, Kedir Hussen1, Abraham Ali1, Goroma Getahun1, Dessalegn Sifer1. Abstract. Introduction: Animal bites and scratches represent the most important public health issue related to dogs and cats because of the risk of rabies transmission associated with ...

  15. Human Bites of the Face with Tissue Losses in Cosmopolitan ...

    African Journals Online (AJOL)

    Dr. Milaki Asuku

    A retrospective series of thirty-six cases of human bites to the face with tissue losses requiring reconstruction ..... bite wounds when compared to other forms of trauma in our regional ... References. 1. Liston PN, Tong DC, Firth NA, Kieser JA.

  16. Factors Associated with Rabies Awareness and Attitude to Dog Bite ...

    African Journals Online (AJOL)

    Preponderance of stray dogs at the study site necessitated assessment of awareness on rabies and associated factors, attitude to dog bite and knowledge on rabies among students and staff members in a University community. We reviewed hospital records for dog bite cases from 2005 to 2010 and administered structured ...

  17. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... correct dose. For bites that itch , apply an ice pack or an over-the-counter anti-itch cream, such as hydrocortisone. Another option is to take an over-the-counter oral antihistamine. To reduce swelling , apply an ice pack to the bite. If you experience any ...

  18. Individual piglets' contribution to the development of tail biting

    NARCIS (Netherlands)

    Zonderland, J.J.; Kemp, B.; Bracke, M.B.M.; Hartog, den L.A.; Spoolder, H.A.M.

    2011-01-01

    Conflicting hypotheses exist about the contribution of individual pigs to the development of a tail-biting outbreak, but there is limited quantitative information to support or dismiss them. This study aims to quantify the development of tail-biting behaviour at pen and individual piglet level,

  19. Ward Round - Crocodile bites in Malawi: microbiology and surgical ...

    African Journals Online (AJOL)

    We present a case series of 5 patients admitted over 5 months to Queen Elizabeth Central Hospital who had sustained injuries from a crocodile bite. Three patients required amputation of a limb. The severe soft tissue injury associated with a crocodile bite and the unusual normal oral flora of the crocodile create challenges ...

  20. Management of common animal bites in the emergency centre

    African Journals Online (AJOL)

    Professor Engelbrecht's current fields of interest are bites, stings and poisonous plants. Correspondence to: ... Cross War Memorial Children's Hospital in. Cape Town ... infections. Wound infection with Pasteurella multocida usually occurs early (within 12 ..... Dog bite prevention: an assessment of child knowledge. J Pediatr ...

  1. Are bruxism and the bite causally related?

    Science.gov (United States)

    Lobbezoo, F; Ahlberg, J; Manfredini, D; Winocur, E

    2012-07-01

    In the dental profession, the belief that bruxism and dental (mal-)occlusion ('the bite') are causally related is widespread. The aim of this review was to critically assess the available literature on this topic. A PubMed search of the English-language literature, using the query 'Bruxism [Majr] AND (Dental Occlusion [Majr] OR Malocclusion [Majr])', yielded 93 articles, of which 46 papers were finally included in the present review*. Part of the included publications dealt with the possible associations between bruxism and aspects of occlusion, from which it was concluded that neither for occlusal interferences nor for factors related to the anatomy of the oro-facial skeleton, there is any evidence available that they are involved in the aetiology of bruxism. Instead, there is a growing awareness of other factors (viz. psychosocial and behavioural ones) being important in the aetiology of bruxism. Another part of the included papers assessed the possible mediating role of occlusion between bruxism and its purported consequences (e.g. tooth wear, loss of periodontal tissues, and temporomandibular pain and dysfunction). Even though most dentists agree that bruxism may have several adverse effects on the masticatory system, for none of these purported adverse effects, evidence for a mediating role of occlusion and articulation has been found to date. Hence, based on this review, it should be concluded that to date, there is no evidence whatsoever for a causal relationship between bruxism and the bite. © 2012 Blackwell Publishing Ltd.

  2. A simple method of equine limb force vector analysis and its potential applications

    Directory of Open Access Journals (Sweden)

    Sarah Jane Hobbs

    2018-02-01

    Full Text Available Background Ground reaction forces (GRF measured during equine gait analysis are typically evaluated by analyzing discrete values obtained from continuous force-time data for the vertical, longitudinal and transverse GRF components. This paper describes a simple, temporo-spatial method of displaying and analyzing sagittal plane GRF vectors. In addition, the application of statistical parametric mapping (SPM is introduced to analyse differences between contra-lateral fore and hindlimb force-time curves throughout the stance phase. The overall aim of the study was to demonstrate alternative methods of evaluating functional (asymmetry within horses. Methods GRF and kinematic data were collected from 10 horses trotting over a series of four force plates (120 Hz. The kinematic data were used to determine clean hoof contacts. The stance phase of each hoof was determined using a 50 N threshold. Vertical and longitudinal GRF for each stance phase were plotted both as force-time curves and as force vector diagrams in which vectors originating at the centre of pressure on the force plate were drawn at intervals of 8.3 ms for the duration of stance. Visual evaluation was facilitated by overlay of the vector diagrams for different limbs. Summary vectors representing the magnitude (VecMag and direction (VecAng of the mean force over the entire stance phase were superimposed on the force vector diagram. Typical measurements extracted from the force-time curves (peak forces, impulses were compared with VecMag and VecAng using partial correlation (controlling for speed. Paired samples t-tests (left v. right diagonal pair comparison and high v. low vertical force diagonal pair comparison were performed on discrete and vector variables using traditional methods and Hotelling’s T2 tests on normalized stance phase data using SPM. Results Evidence from traditional statistical tests suggested that VecMag is more influenced by the vertical force and impulse, whereas

  3. Special Operations Forces (SOF) technical analysis and evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-08-31

    In response to Task Order 001, Los Alamos National Laboratory Contract 9-L5H-1508P-1, Betac Corporation is pleased to provide ten quick-response, short-term analytical papers in support of Low Intensity Conflict (LIC) and Special Operations (SO). The papers are study methodologies which provide background, baseline, concepts, approaches, and recommendations in the mission areas identified in the Statement of Work. Although the Statement of Work specifies only nine papers, a tenth paper has been included addressing Command Relationships, since this subject affects all other topics and is of critical importance to USCINCSOC in establishing the United States Special Operations Command (USSOCOM). Each paper addresses the feasibility of further effort in each area of interest. The ten papers address: (1) mission support systems; (2) research, development, and acquisition; (3) headquarters equipment; (4) C3I architecture; (5) intelligence dissemination; (6) intelligence collection management; (7) intelligence support to SOF targeting; (8) joint mission area analysis (JMAA); (9) joint SOF master plan; and (10) command relationships.

  4. Analysis of experimental data: The average shape of extreme wave forces on monopile foundations and the NewForce model

    DEFF Research Database (Denmark)

    Schløer, Signe; Bredmose, Henrik; Ghadirian, Amin

    2017-01-01

    Experiments with a stiff pile subjected to extreme wave forces typical of offshore wind farm storm conditions are considered. The exceedance probability curves of the nondimensional force peaks and crest heights are analysed. The average force time history normalised with their peak values are co...... to the average shapes. For more nonlinear wave shapes, higher order terms has to be considered in order for the NewForce model to be able to predict the expected shapes.......Experiments with a stiff pile subjected to extreme wave forces typical of offshore wind farm storm conditions are considered. The exceedance probability curves of the nondimensional force peaks and crest heights are analysed. The average force time history normalised with their peak values...... are compared across the sea states. It is found that the force shapes show a clear similarity when grouped after the values of the normalised peak force, F/(ρghR2), normalised depth h/(gT2p) and presented in a normalised time scale t/Ta. For the largest force events, slamming can be seen as a distinct ‘hat...

  5. Evaluation of apical force distribution for orthodontic tooth movements -A flnite element analysis

    Directory of Open Access Journals (Sweden)

    S Rex

    2010-01-01

    Full Text Available FEM is defined as a technique of discrediting a continuum into simple geometric shapes elements, enforcing material properties and governing relationships on these elements giving due consideration to loading and boundary conditions which results in a set of equation, solution which gives the approximate behaviour of the continuum.This study was undertaken to determine the types of orthodontic forces that cause high stress at the root apex. A 3-dimensional finite clement model of a maxillary central incisor, its periodontal ligament (POL,and alveolar bone was constructed on the basis of average anatomic morphology.The maxillary centralincisor was chosen for study because it is one of the teeth at greatest risk for apical root resorption. The material properties of enamel dentin, POL, and bone and 5 different load systems (tipping, intrusion,extrusion,bodily movement,and rotational force were tested. The finite element analysis showed that purely intrusive, extrusive, and rotational forces had stresses concentrated at the apex of the root. The principal stress from a tipping force was located at the alveolar crest. For bodily movement,stress was distributed throughout the PDL;however,it was concentrated more at the alveolar crest. We conclude that intrusive,extrusive, and rotational forces produce more stress at the apex. Bodily movement and tipping forces concentrate forces at the alveolar crest, not at the apex.

  6. Prediction of bubble detachment diameter in flow boiling based on force analysis

    International Nuclear Information System (INIS)

    Chen Deqi; Pan Liangming; Ren Song

    2012-01-01

    Highlights: ► All the forces acting on the growing bubbles are taken into account in the model. ► The bubble contact diameter has significant effect on bubble detachment. ► Bubble growth force and surface tension are more significant in narrow channel. ► A good agreement between the predicted and the measured results is achieved. - Abstract: Bubble detachment diameter is one of the key parameters in the study of bubble dynamics and boiling heat transfer, and it is hard to be measured in a boiling system. In order to predict the bubble detachment diameter, a theoretical model is proposed based on forces analysis in this paper. All the forces acting on a bubble are taken into account to establish a model for different flow boiling configurations, including narrow and conventional channels, upward, downward and horizontal flows. A correlation of bubble contact circle diameter is adopted in this study, and it is found that the bubble contact circle diameter has significant effect on bubble detachment. A new correlation taking the bubble contact circle diameter into account for the evaluation of bubble growth force is proposed in this study, and it is found that the bubble growth force and surface tension force are more significant in narrow channel when comparing with that in conventional channel. A visual experiment was carried out in order to verify present model; and the experimental data from published literature are used also. A good agreement between predicted and measured results is achieved.

  7. Analysis of force variance for a continuous miner drum using the Design of Experiments method

    Energy Technology Data Exchange (ETDEWEB)

    S. Somanchi; V.J. Kecojevic; C.J. Bise [Pennsylvania State University, University Park, PA (United States)

    2006-06-15

    Continuous miners (CMs) are excavating machines designed to extract a variety of minerals by underground mining. The variance in force experienced by the cutting drum is a very important aspect that must be considered during drum design. A uniform variance essentially means that an equal load is applied on the individual cutting bits and this, in turn, enables better cutting action, greater efficiency, and longer bit and machine life. There are certain input parameters used in the drum design whose exact relationships with force variance are not clearly understood. This paper determines (1) the factors that have a significant effect on the force variance of the drum and (2) the values that can be assigned to these factors to minimize the force variance. A computer program, Continuous Miner Drum (CMD), was developed in collaboration with Kennametal, Inc. to facilitate the mechanical design of CM drums. CMD also facilitated data collection for determining significant factors affecting force variance. Six input parameters, including centre pitch, outer pitch, balance angle, shift angle, set angle and relative angle were tested at two levels. Trials were configured using the Design of Experiments (DoE) method where 2{sup 6} full-factorial experimental design was selected to investigate the effect of these factors on force variance. Results from the analysis show that all parameters except balance angle, as well as their interactions, significantly affect the force variance.

  8. EDDYTRAN program system for eddy current, electromagnetic force and structural analysis

    International Nuclear Information System (INIS)

    Kameari, A.; Nikura, S.

    1983-01-01

    A computer program system (EDDYTRAN), which is applicable to torus structures of magnetic fusion devices, has been developed to calculate the eddy current, electromagnetic force and structural analysis. The program system is designed to perform the following functions sequentially: 1) generation of model mesh and other data such as electromagnetic and mechanical properties of finite elements and boundary conditions, 2) calculations of eddy currents and electromagnetic forces, 3) transformation of the resultant force to load data fit to the structural analysis program, 4) structural analysis and 5) post-processing of the results. The EDDYTRAN utilizes the EDDYCUFF (EDDY CUrrent, magnetic Field and electromagnetic Force) program and the NASTRAN (NASA STRuctural ANalysis) program. Here, the EDDYCUFF program which has been developed by the authors is a generalized computer program to calculate transient eddy currents, resultant magnetic fields and electromagnetic forces in the conductive components. This paper describes the outline of the EDDYTRAN program system and preliminary results obtained through the application to the Tokamak reactor design which was performed for the Japan Atomic Energy Research Institute

  9. A General Contact Force Analysis of an Under-Actuated Finger in Robot Hand Grasping

    Directory of Open Access Journals (Sweden)

    Xuan Vinh Ha

    2016-02-01

    Full Text Available This paper develops a mathematical analysis of contact forces for the under-actuated finger in a general under-actuated robotic hand during grasping. The concept of under-actuation in robotic grasping with fewer actuators than degrees of freedom (DOF, through the use of springs and mechanical limits, allows the hand to adjust itself to an irregularly shaped object without complex control strategies and sensors. Here the main concern is the contact forces, which are important elements in grasping tasks, based on the proposed mathematical analysis of their distributions of the n-DOF under-actuated finger. The simulation results, along with the 3-DOF finger from the ADAMS model, show the effectiveness of the mathematical analysis method, while comparing them with the measured results. The system can find magnitudes of the contact forces at the contact positions between the phalanges and the object.

  10. Epidemiologic Study of Animal Bites and Rabies Referring to Rabies Prevention and Treatment Center of Jahrom University of Medical Sciences in 2011-2016

    Directory of Open Access Journals (Sweden)

    Tayebeh Rakhshani

    2017-09-01

    Full Text Available Background: The aim of this study was to describe the epidemiological characteristics of animal bite during 2011 -2016 years in Jahrom city. Methods: This cross-sectional study was performed using data from the Jahrom University of Medical Sciences. For analytical statistics, Chi-square test and multiple regression test were used. SPSS software version 21 was used for statistical analysis. Results: In total, 2010 people with an average age of 31.4 ±1.7 in the years 2011 to 2016 in the were biting. Of these, 429 were female (21.3% and 1581 were male (78.7%. The results multiple showed that there was a positive correlation between (animal bites; Beta = 0.05, age; Beta = 0.02, location of ulcer; Beta = 0.01 with animal bites positive and direct correlation with animal bites. Animal type variables (Beta = -0.06, primary measures (Beta = -0.03, gender (Beta = -0.03, nationality (Beta = -0.03, wound size (Beta = -0.02 and location (Beta = 0.05 had a negative correlation with animal bites. Conclusion: Most cases of biting have been related to dogs, pets and rural areas. Therefore, the vaccination of dogs and cats is essential by preventing dogs from being exposed to humans.

  11. Decoupling Principle Analysis and Development of a Parallel Three-Dimensional Force Sensor.

    Science.gov (United States)

    Zhao, Yanzhi; Jiao, Leihao; Weng, Dacheng; Zhang, Dan; Zheng, Rencheng

    2016-09-15

    In the development of the multi-dimensional force sensor, dimension coupling is the ubiquitous factor restricting the improvement of the measurement accuracy. To effectively reduce the influence of dimension coupling on the parallel multi-dimensional force sensor, a novel parallel three-dimensional force sensor is proposed using a mechanical decoupling principle, and the influence of the friction on dimension coupling is effectively reduced by making the friction rolling instead of sliding friction. In this paper, the mathematical model is established by combining with the structure model of the parallel three-dimensional force sensor, and the modeling and analysis of mechanical decoupling are carried out. The coupling degree (ε) of the designed sensor is defined and calculated, and the calculation results show that the mechanical decoupling parallel structure of the sensor possesses good decoupling performance. A prototype of the parallel three-dimensional force sensor was developed, and FEM analysis was carried out. The load calibration and data acquisition experiment system are built, and then calibration experiments were done. According to the calibration experiments, the measurement accuracy is less than 2.86% and the coupling accuracy is less than 3.02%. The experimental results show that the sensor system possesses high measuring accuracy, which provides a basis for the applied research of the parallel multi-dimensional force sensor.

  12. Analysis of initial prestress force of spatial tendon prestressed concrete containment structures

    International Nuclear Information System (INIS)

    Shiau, H.-S.

    1975-01-01

    A theoretical investigation is presented of the initial stage of prestressed tendon and prestressed concrete before and after jacking force of tendon anchorage released. A method is developed that is applicable to any kind of spatial tendon considering frictional loss due to length and curvature effects. A triple integral equation of one independent variable and jacking force is derived to represent an exact solution of tendon force along the whole tendon which may have reverse curvatures. In order to analyze the stress response of concrete due to this prestress force by using existing finite element computer program or any other kind of computer program, a systematic method is suggested to obtain tendon force components, which are represented by a series of equations of one independent variable, in any coordinate system as external force applied on the concrete. The resulting systems of the equations are then solved by numerical mathematic and computer techniques. Two numerical examples are represented. The first example is, dome prestress analysis of containment building by the proposed method and Kalnins' computer program for shell of revolution. Results are discussed. The second example is picked from prestress analysis for personnel air lock of containment building by using proposed method and FELAP finite element Computer program. It includes two different tendon arrangements around the opening. The results of these two different arrangements are compared and discussed

  13. A simple method of equine limb force vector analysis and its potential applications.

    Science.gov (United States)

    Hobbs, Sarah Jane; Robinson, Mark A; Clayton, Hilary M

    2018-01-01

    Ground reaction forces (GRF) measured during equine gait analysis are typically evaluated by analyzing discrete values obtained from continuous force-time data for the vertical, longitudinal and transverse GRF components. This paper describes a simple, temporo-spatial method of displaying and analyzing sagittal plane GRF vectors. In addition, the application of statistical parametric mapping (SPM) is introduced to analyse differences between contra-lateral fore and hindlimb force-time curves throughout the stance phase. The overall aim of the study was to demonstrate alternative methods of evaluating functional (a)symmetry within horses. GRF and kinematic data were collected from 10 horses trotting over a series of four force plates (120 Hz). The kinematic data were used to determine clean hoof contacts. The stance phase of each hoof was determined using a 50 N threshold. Vertical and longitudinal GRF for each stance phase were plotted both as force-time curves and as force vector diagrams in which vectors originating at the centre of pressure on the force plate were drawn at intervals of 8.3 ms for the duration of stance. Visual evaluation was facilitated by overlay of the vector diagrams for different limbs. Summary vectors representing the magnitude (VecMag) and direction (VecAng) of the mean force over the entire stance phase were superimposed on the force vector diagram. Typical measurements extracted from the force-time curves (peak forces, impulses) were compared with VecMag and VecAng using partial correlation (controlling for speed). Paired samples t -tests (left v. right diagonal pair comparison and high v. low vertical force diagonal pair comparison) were performed on discrete and vector variables using traditional methods and Hotelling's T 2 tests on normalized stance phase data using SPM. Evidence from traditional statistical tests suggested that VecMag is more influenced by the vertical force and impulse, whereas VecAng is more influenced by the

  14. Forcing scheme analysis for the axisymmetric lattice Boltzmann method under incompressible limit.

    Science.gov (United States)

    Zhang, Liangqi; Yang, Shiliang; Zeng, Zhong; Chen, Jie; Yin, Linmao; Chew, Jia Wei

    2017-04-01

    Because the standard lattice Boltzmann (LB) method is proposed for Cartesian Navier-Stokes (NS) equations, additional source terms are necessary in the axisymmetric LB method for representing the axisymmetric effects. Therefore, the accuracy and applicability of the axisymmetric LB models depend on the forcing schemes adopted for discretization of the source terms. In this study, three forcing schemes, namely, the trapezium rule based scheme, the direct forcing scheme, and the semi-implicit centered scheme, are analyzed theoretically by investigating their derived macroscopic equations in the diffusive scale. Particularly, the finite difference interpretation of the standard LB method is extended to the LB equations with source terms, and then the accuracy of different forcing schemes is evaluated for the axisymmetric LB method. Theoretical analysis indicates that the discrete lattice effects arising from the direct forcing scheme are part of the truncation error terms and thus would not affect the overall accuracy of the standard LB method with general force term (i.e., only the source terms in the momentum equation are considered), but lead to incorrect macroscopic equations for the axisymmetric LB models. On the other hand, the trapezium rule based scheme and the semi-implicit centered scheme both have the advantage of avoiding the discrete lattice effects and recovering the correct macroscopic equations. Numerical tests applied for validating the theoretical analysis show that both the numerical stability and the accuracy of the axisymmetric LB simulations are affected by the direct forcing scheme, which indicate that forcing schemes free of the discrete lattice effects are necessary for the axisymmetric LB method.

  15. Naval Reserve Force: Cost and Benefit Analysis of Reducing the Number of Naval Surface Reserve Force Operating Budget Holders

    National Research Council Canada - National Science Library

    Young, Eric

    1997-01-01

    .... This thesis examines one of Commander Naval Surface Reserve Force's initiatives for reducing the current number of Operating Budget holder's Comptroller Departments without sacrificing efficiency...

  16. Management of vascular trauma from dog bites.

    Science.gov (United States)

    Akingba, A George; Robinson, Eric A; Jester, Andrea L; Rapp, Brian M; Tsai, Anthony; Motaganahalli, Raghu L; Dalsing, Michael C; Murphy, Michael P

    2013-11-01

    Vascular trauma from large-dog bites present with a combination of crush and lacerating injuries to the vessel, as well as significant adjacent soft tissue injury and a high potential for wound complications. This retrospective case series evaluates our 15 years of experience in managing this uncommonly seen injury into suggested treatment recommendations. From our database, 371 adult patients presented with dog bites between July 1997 and June 2012. Twenty (5.4%) of those patients had vascular injuries requiring surgical intervention. Patient demographics, anatomic location of injury, clinical presentation, imaging modality, method of repair, and complication rates were reviewed to assess efficacy in preserving limb function. Pediatric patients were managed at the regional children's hospital and, therefore, not included in this study. Among the 20 surgically treated vascular injuries, there were 13 arterial-only injuries, two venous-only injuries, and five combination arterial and venous injuries. Seventeen patients (85%) had upper extremity injuries; three patients had lower extremity injuries (15%). The axillobrachial artery was the most commonly injured single vessel (n = 9/20; 45%), followed by the radial artery (n = 4/20; 20%). Surgical repair of vascular injuries consisted of resection and primary anastomosis (four), interposition bypass of artery with autogenous vein (13), and ligation (two), with (one) being a combination of bypass and ligation. All patients had debridement of devitalized tissue combined with pulse lavage irrigation and perioperative antibiotics. Associated injuries requiring repair included muscle and skin (n = 10/20; 50%), bone (n = 1/20; 5%), nerve (n = 1/20; 5%), and combinations of the three (n = 5/20; 25%). Postoperative antibiotic therapy was administered for 14.7 ± 8.2 days in all 20 patients. Four patients (20%) developed postoperative wound infections, although this did not compromise their vascular repair. Of the patients

  17. Giving the force direction : Analysis of speed skater push off forces with respect to an inertial coordinate system

    NARCIS (Netherlands)

    van der Kruk, E.; van der Helm, F.C.T.; Schwab, A.L.; Veeger, H.E.J.

    2016-01-01

    Pushoff in speed skating requires an extensive motion strategy. During speed skating the skater continuously changes the lean and steering angle of the skate and therewith the direction of push-off, The forces in an inertial coordinate system can give insight into what amount of the push-off force

  18. Nanostructure and force spectroscopy analysis of human peripheral blood CD4+ T cells using atomic force microscopy

    International Nuclear Information System (INIS)

    Hu Mingqian; Wang Jiongkun; Cai Jiye; Wu Yangzhe; Wang Xiaoping

    2008-01-01

    To date, nanoscale imaging of the morphological changes and adhesion force of CD4 + T cells during in vitro activation remains largely unreported. In this study, we used atomic force microscopy (AFM) to study the morphological changes and specific binding forces in resting and activated human peripheral blood CD4 + T cells. The AFM images revealed that the volume of activated CD4 + T cells increased and the ultrastructure of these cells also became complex. Using a functionalized AFM tip, the strength of the specific binding force of the CD4 antigen-antibody interaction was found to be approximately three times that of the unspecific force. The adhesion forces were not randomly distributed over the surface of a single activated CD4 + T cell, indicated that the CD4 molecules concentrated into nanodomains. The magnitude of the adhesion force of the CD4 antigen-antibody interaction did not change markedly with the activation time. Multiple bonds involved in the CD4 antigen-antibody interaction were measured at different activation times. These results suggest that the adhesion force involved in the CD4 antigen-antibody interaction is highly selective and of high affinity

  19. Nanostructure and force spectroscopy analysis of human peripheral blood CD4+ T cells using atomic force microscopy.

    Science.gov (United States)

    Hu, Mingqian; Wang, Jiongkun; Cai, Jiye; Wu, Yangzhe; Wang, Xiaoping

    2008-09-12

    To date, nanoscale imaging of the morphological changes and adhesion force of CD4(+) T cells during in vitro activation remains largely unreported. In this study, we used atomic force microscopy (AFM) to study the morphological changes and specific binding forces in resting and activated human peripheral blood CD4(+) T cells. The AFM images revealed that the volume of activated CD4(+) T cells increased and the ultrastructure of these cells also became complex. Using a functionalized AFM tip, the strength of the specific binding force of the CD4 antigen-antibody interaction was found to be approximately three times that of the unspecific force. The adhesion forces were not randomly distributed over the surface of a single activated CD4(+) T cell, indicated that the CD4 molecules concentrated into nanodomains. The magnitude of the adhesion force of the CD4 antigen-antibody interaction did not change markedly with the activation time. Multiple bonds involved in the CD4 antigen-antibody interaction were measured at different activation times. These results suggest that the adhesion force involved in the CD4 antigen-antibody interaction is highly selective and of high affinity.

  20. BFPTool: a software tool for analysis of Biomembrane Force Probe experiments.

    Science.gov (United States)

    Šmít, Daniel; Fouquet, Coralie; Doulazmi, Mohamed; Pincet, Frédéric; Trembleau, Alain; Zapotocky, Martin

    2017-01-01

    The Biomembrane Force Probe is an approachable experimental technique commonly used for single-molecule force spectroscopy and experiments on biological interfaces. The technique operates in the range of forces from 0.1 pN to 1000 pN. Experiments are typically repeated many times, conditions are often not optimal, the captured video can be unstable and lose focus; this makes efficient analysis challenging, while out-of-the-box non-proprietary solutions are not freely available. This dedicated tool was developed to integrate and simplify the image processing and analysis of videomicroscopy recordings from BFP experiments. A novel processing feature, allowing the tracking of the pipette, was incorporated to address a limitation of preceding methods. Emphasis was placed on versatility and comprehensible user interface implemented in a graphical form. An integrated analytical tool was implemented to provide a faster, simpler and more convenient way to process and analyse BFP experiments.

  1. Leveraging intellectual capital through Lewin's Force Field Analysis: The case of software development companies

    Directory of Open Access Journals (Sweden)

    Alexandru Capatina

    2017-09-01

    Full Text Available This article presents an original conceptual framework for the strategic management of intellectual capital assets in software development companies. The framework is based on Lewin's Force Field Analysis. The framework makes it possible to assess software company managers’ opinions regarding the way driving and restraining forces affect the pillars of intellectual capital. The capacity to adapt to change is vital for companies in knowledge-intensive industries. Accordingly, this study examined a sample of 74 Romanian software development companies. The aim was to help companies benefit from managing the driving and restraining forces acting upon the pillars of intellectual capital (human, structural, and relational. The effects of the driving forces, quantified by PathMaker software's Force Field Tool, were observed to be greater than the restraining forces for each pillar of intellectual capital. This paper contributes by showing the explanatory power of this framework. The framework thus offers a tool that helps managers drive change in their organizations through effective intellectual capital management. Furthermore, this article describes how to encourage the implementation of changes that create value for software development companies.

  2. Animal Bites in Borujerd: An Overview of Animal Bites in Iran

    Directory of Open Access Journals (Sweden)

    Sabouri Ghannad

    2014-04-01

    Full Text Available Background Rabies has been reported as the most important endemic zoonotic disease in Iran and still remains as a major public health problem. Objectives The main objective of the current research was to study the epidemiology of animal bites in Borujerd County in Iran and to compare its prevalence to other parts of Iran from April 2006 to September 2011. Patients and Methods The data were recorded in questionnaires and analyzed by SPSS version 16. Chi-square test was performed to evaluate the relationship among variables and P value was set as 0.05. Results Dog bites were the most common (69.8%, followed by cat (17.2%, fox and wolf (1.4%, sheep and cow (2.8%, monkey and donkey (5%, mouse and squirrel (2.2% and other animals (1.6%. Leg was the most common bite site forming 46.6% of cases, followed by hands (41.8%, buttocks (4.6%, head (4% and body (2.9%. Most of the subjects belonged to the age group < 10 (175.2 per 100000 populations. The injury location was associated significantly with sex and the residential status. Conclusions This study strongly highlights a high priority goal for health authorities to develop educational programs, recommended for the general population to inform them about the benefits of continuing the medication. Vaccination of domestic dogs and also eradication of stray ones, in addition to educational programs should be prioritized by health authorities.

  3. Biting rates and developmental substrates for biting midges (Diptera: Ceratopogonidae) in Iquitos, Peru.

    Science.gov (United States)

    Mercer, David R; Spinelli, Gustavo R; Watts, Douglas M; Tesh, Robert B

    2003-11-01

    Biting midges (Diptera: Ceratopogonidae) were collected at 16 periurban and rural sites around Iquitos, Peru, between 17 October 1996 and 26 May 1997. Culicoides paraensis (Goeldi), the principal vector of Oropouche virus, was the most commonly collected species (9,086 flies) with Culicoides insinuatus Wirth & Blanton second (7,229 flies). Although both species were collected at all sampling sites (linear (distance surveyed approximately 25 km), C. paraensis dominated at northern collection sites (> 90%), whereas C. insinuatus prevailed at southern collection sites (> 60%). C. paraensis were collected from human sentinels at a constant rate throughout daylight hours, at similar rates during wet and dry months, and regardless of rainfall. Larval developmental substrates for C. paraensis included decaying platano (Musa x paradisiaca L. [Musaceae]) stems, stumps, flowers, fruits, and debris beneath platano trees as well as from soil beneath a fruiting mamay (Syzygium malaccense Merr. & Perry [Myrtaceae] ) tree and organic-rich mud along a lake shoreline. C. insinuatus adults likewise emerged from decaying platano and organic-rich mud along a lake shoreline, but also from debris accumulated in the axils of aguaje (Mauritia flexuosa L. [Palmae]) fronds and decaying citrus fruit. Despite high numbers of biting adults near putative substrates, adults of neither species emerged from other decomposing plant material, soil, phytotelmata, or artificial containers. Because both species of biting midges emerged in high numbers from all parts of platano (ubiquitous in Iquitos), it will be challenging to control them through sanitation.

  4. Human behavior preceding dog bites to the face.

    Science.gov (United States)

    Rezac, P; Rezac, K; Slama, P

    2015-12-01

    Facial injuries caused by dog bites pose a serious problem. The aims of this study were to determine human behavior immediately preceding a dog bite to the face and to assess the effects of victim age and gender and dog sex and size on the location of the bite to the face and the need for medical treatment. Complete data on 132 incidents of bites to the face were analysed. A human bending over a dog, putting the face close to the dog's face, and gazing between victim and dog closely preceded a dog bite to the face in 76%, 19% and 5% of cases, respectively. More than half of the bites were directed towards the central area of the victim's face (nose, lips). More than two thirds of the victims were children, none of the victims was an adult dog owner and only adult dogs bit the face. Victim's age and gender and dog's sex and size did not affect the location of the bite on the face. People who were bitten by large dogs sought medical treatment more often than people who were bitten by small dogs (P face close to the dog's face and gazing between human and dog should be avoided, and children should be carefully and constantly supervised when in the presence of dogs. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Afibrinogenemia following snake bite (Crotalus durissus terrificus

    Directory of Open Access Journals (Sweden)

    C. F. S. Amaral

    1988-08-01

    Full Text Available This paper reports two cases of afibrinogenemia with normal platelet count following Crotalus durissus terrificus, snake bite Both patients presented high output acute renal failure and case two also had increased blood levels of CPK and LDH compatible with the diagnosis of rhabdomyolysis. Case one was given an unknown amount of antivenom and was treated with epsilonaminocaproic acid and a fresh whole blood transfusion and showed recovery of the coagulation disturbance 40 hours following these measures. Case two was given an adequate amount of crotalide antivenom and the coagulation tests performed 12 hours later showed a normal partial thromboplastin time and fibrinogen 86 mg/100ml. Case one presented no haemorrhagic disturbances. Case two presented persistent bleeding following venopuncture and after removal of impetigo crust in the legs. Acute renal failure was treated conservatively and both patients were discharged from the hospital with recovery of the renal function.

  6. Primary lymph node responses to mosquito bites.

    Science.gov (United States)

    Mellink, J J; Vos, B J

    1977-03-29

    Post-auricular lymph node responses and changes in fresh weight of thymus and spleen of hamsters and mice at 4 and 8 days after primary exposure of both ears to 20 bites by the mosquito Aedes aegypti were studied quantitatively. In both hosts lymph node changes characteristic of the development of cell-mediated immune responses and those which are believed to lead to antibody production occurred, with the emphasis on the latter phenomena. No reactions of thymus and spleen were observed. The responses recorded are considered to be immunologically specific. In hamsters, but not in mice, the responses related to humoral sensitization coincided in time to a large extent with those of the cell-mediated immune processes. The stronger humoral responses in mice were probably in the first place the result of the relatively higher dosages applied.

  7. An Analytical Study of Mammalian Bite Wounds Requiring Inpatient Management

    Directory of Open Access Journals (Sweden)

    Young-Geun Lee

    2013-11-01

    Full Text Available BackgroundMammalian bite injuries create a public health problem because of their frequency, potential severity, and increasing number. Some researchers have performed fragmentary analyses of bite wounds caused by certain mammalian species. However, little practical information is available concerning serious mammalian bite wounds that require hospitalization and intensive wound management. Therefore, the purpose of this study was to perform a general review of serious mammalian bite wounds.MethodsWe performed a retrospective review of the medical charts of 68 patients who were referred to our plastic surgery department for the treatment of bite wounds between January 2003 and October 2012. The cases were analyzed according to the species, patient demographics, environmental factors, injury characteristics, and clinical course.ResultsAmong the 68 cases of mammalian bite injury, 58 (85% were caused by dogs, 8 by humans, and 2 by cats. Most of those bitten by a human and both of those bitten by cats were male. Only one-third of all the patients were children or adolescents. The most frequent site of injury was the face, with 40 cases, followed by the hand, with 16 cases. Of the 68 patients, 7 were treated with secondary intention healing. Sixty-one patients underwent delayed procedures, including delayed direct closure, skin graft, composite graft, and local flap.ConclusionsBased on overall findings from our review of the 68 cases of mammalian bites, we suggest practical guidelines for the management of mammalian bite injuries, which could be useful in the treatment of serious mammalian bite wounds.

  8. Driving Force Filtering and Driving Mechanism Analysis of Urban Agricultural Development in Weifang County, China

    Directory of Open Access Journals (Sweden)

    SUI Fei-fei

    2016-03-01

    Full Text Available As an agricultural nation, the agricultural landscape is the basic appearance and existence in China, but the common existence often be neglected and contempted. As a new type of design and ideology, the development of urban agricultural landscape will greatly affect the texture and structure of the urban space. According to the urban agricultural production data and the socio-economic data of Weifang County, a set of evaluation index system that could analyze quantitatively the driving force of urban agricultural production changes and the internal drive mechanism was built. The original driving force indicators of economy, society, resources and environment from the time-series were chosen, and then 15 driving forces from the original driving forces by correlation analysis and principal component analysis were selected. The degree of influence was analyzed and the driving forces model by means of partial least squares(PLS was built. The results demonstrated that the factors greatly influenced the increase of urban agricultural output value in Weifang County were per capita net income of rural residents, agricultural machinery total power, effective irrigation area, centralized treatment rate of urban sewage, with the driving exponents 0.2509, 0.1019, 0.1655, 0.1332, respectively. The negative influence factor was the use amount of agricultural plastic film and the driving exponent was-0.2146. The research provides a reference for the development of urban agriculture, as well as a reference for the related study.

  9. Analysis of vector wind change with respect to time for Vandenberg Air Force Base, California

    Science.gov (United States)

    Adelfang, S. I.

    1978-01-01

    A statistical analysis of the temporal variability of wind vectors at 1 km altitude intervals from 0 to 27 km altitude taken from a 10-year data sample of twice-daily rawinsode wind measurements over Vandenberg Air Force Base, California is presented.

  10. Giving the force direction: Analysis of speed skater push off forces with respect to an inertial coordinate system

    OpenAIRE

    van der Kruk, E.; van der Helm, F.C.T.; Schwab, A.L.; Veeger, H.E.J.

    2016-01-01

    Pushoff in speed skating requires an extensive motion strategy. During speed skating the skater continuously changes the lean and steering angle of the skate and therewith the direction of push-off, The forces in an inertial coordinate system can give insight into what amount of the push-off force is directed into the forward motion. In this paper we present the preliminary results of a study on the global forces in speed skating. From a mechanical viewpoint, increasing the lean angle of the ...

  11. Analysis of force characteristics of a superconducting ball in a given magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Liu Jianhua, E-mail: liujianhua@mail.iee.ac.c [Institute of Electrical Engineering, Chinese Academy of Sciences, No. 6 Beiertiao, Zhongguancun, Beijing 100190 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100049 (China); Wang Qiuliang; Yan Luguang [Institute of Electrical Engineering, Chinese Academy of Sciences, No. 6 Beiertiao, Zhongguancun, Beijing 100190 (China)

    2009-07-01

    The electromagnetic force characteristics along Z direction of a superconducting ball levitated by spherical coils with shaping blocks are calculated based on a semi-analytical method. The calculating results from the semi-analytical method are compared with the finite element analysis (FEA) method through a calculation example. The method can be applied to further analysis of dynamic characteristics and parameter optimization in the suspension system.

  12. Operational Augmentation of Forced Circulation Type Solar Dryer System Using CFD Analysis

    OpenAIRE

    Atul Patel; Gaurav Patel

    2014-01-01

    Solar drying is basically heat and mass transfer process in which the liquid water from the surface and the vapour removed by draft. The efficiency of a solar drying system is affected by the properties of drying materials.e.g. size, shape and geometry as well as ambient conditions. In this research article, the authors have done the CFD analysis of a Forced Circulation type Solar Dryer used conventionally for dehydrating vegetables and fruits. Using CFD analysis, the limiting...

  13. Cutting force response in milling of Inconel: analysis by wavelet and Hilbert-Huang Transforms

    Directory of Open Access Journals (Sweden)

    Grzegorz Litak

    Full Text Available We study the milling process of Inconel. By continuously increasing the cutting depth we follow the system response and appearance of oscillations of larger amplitude. The cutting force amplitude and frequency analysis has been done by means of wavelets and Hilbert-Huang transform. We report that in our system the force oscillations are closely related to the rotational motion of the tool and advocate for a regenerative mechanism of chatter vibrations. To identify vibrations amplitudes occurrence in time scale we apply wavelet and Hilbert-Huang transforms.

  14. Numerical analysis on the action of centrifuge force in magnetic fluid rotating shaft seals

    Science.gov (United States)

    Zou, Jibin; Li, Xuehui; Lu, Yongping; Hu, Jianhui

    2002-11-01

    The magnetic fluid seal is suitable for high-speed rotating shaft seal applications. Centrifuge force will have evident influence on magnetic fluid rotating shaft seals. The seal capacity of the rotating shaft seal can be improved or increased by some measures. Through hydrodynamic analysis the moving status of the magnetic fluid is worked out. By numerical method, the magnetic field and the isobars in the magnetic fluid of a seal device are computed. Then the influence of the centrifuge force on the magnetic fluid seal is calculated quantitatively.

  15. Numerical analysis on the action of centrifuge force in magnetic fluid rotating shaft seals

    International Nuclear Information System (INIS)

    Zou Jibin; Li Xuehui; Lu Yongping; Hu Jianhui

    2002-01-01

    The magnetic fluid seal is suitable for high-speed rotating shaft seal applications. Centrifuge force will have evident influence on magnetic fluid rotating shaft seals. The seal capacity of the rotating shaft seal can be improved or increased by some measures. Through hydrodynamic analysis the moving status of the magnetic fluid is worked out. By numerical method, the magnetic field and the isobars in the magnetic fluid of a seal device are computed. Then the influence of the centrifuge force on the magnetic fluid seal is calculated quantitatively

  16. [Constitutive correlations for wire-wrapped subchannel analysis under forced and mixed convection conditions]. Part II

    International Nuclear Information System (INIS)

    Cheng, S.K.; Todreas, N.E.

    1984-08-01

    A new version of the ENERGY series code, ENERGY-IV, was written for predicting coolant temperature distributions in wire-wrapped rod assemblies used in the Liquid Metal Fast Breeder Reactor. The ENERGY-IV Code is applicable to both steady-state forced and mixed convection operation for a single isolated assembly. (The SUPERENERGY Code, [Basehore (1980)] is applicable to core wide forced convection analysis.) ENERGY-IV is an empirical code designed to be fast running. Hence the core designer can use it as an inexpensive thermal hydraulic design or diagnosis tool

  17. Analysis on the resistive force in penetration of a rigid projectile

    Directory of Open Access Journals (Sweden)

    Xiao-wei Chen

    2014-09-01

    Full Text Available According to the dimensionless formulae of DOP (depth of penetration of a rigid projectile into different targets, the resistive force which a target exerts on the projectile during the penetration of rigid projectile is theoretically analyzed. In particular, the threshold Vc of impact velocity applicable for the assumption of constant resistive force is formulated through impulse analysis. The various values of Vc corresponding to different pairs of projectile-target are calculated, and the consistency of the relative test data and numerical results is observed.

  18. Analysis of Real Ship Rolling Dynamics under Wave Excitement Force Composed of Sums of Cosine Functions

    International Nuclear Information System (INIS)

    Zhang, Y. S.; Cai, F.; Xu, W. M.

    2011-01-01

    The ship motion equation with a cosine wave excitement force describes the slip moments in regular waves. A new kind of wave excitement force model, with the form as sums of cosine functions was proposed to describe ship rolling in irregular waves. Ship rolling time series were obtained by solving the ship motion equation with the fourth-order-Runger-Kutta method. These rolling time series were synthetically analyzed with methods of phase-space track, power spectrum, primary component analysis, and the largest Lyapunove exponent. Simulation results show that ship rolling presents some chaotic characteristic when the wave excitement force was applied by sums of cosine functions. The result well explains the course of ship rolling's chaotic mechanism and is useful for ship hydrodynamic study.

  19. Numerical analysis of dynamic force spectroscopy using the torsional harmonic cantilever

    International Nuclear Information System (INIS)

    Solares, Santiago D; Hoelscher, Hendrik

    2010-01-01

    A spectral analysis method has been recently introduced by Stark et al (2002 Proc. Natl Acad. Sci. USA 99 8473-8) and implemented by Sahin et al (2007 Nat. Nanotechnol. 2 507-14) using a T-shaped cantilever design, the torsional harmonic cantilever (THC), which is capable of performing simultaneous tapping-mode atomic force microscopy imaging and force spectroscopy. Here we report on numerical simulations of the THC system using a simple dual-mass flexural-torsional model, which is applied in combination with Fourier data processing software to illustrate the spectroscopy process for quality factors corresponding to liquid, air and vacuum environments. We also illustrate the acquisition of enhanced topographical images and deformed surface contours under the application of uniform forces, and compare the results to those obtained with a previously reported linear dual-spring-mass model.

  20. Structural analysis of γ radiation-induced chromosomal aberrations observed by atomic force microscopy

    International Nuclear Information System (INIS)

    Qu Shuang; Chen Ying; Ge Shili; Liu Xiulin; Zhou Pingkun; Zhang Sa; Zhang Detian

    2003-01-01

    Objective: To find a new method for the measurement of radiation-induced damage, the structures of normal chromosomes and 60 Co γ-ray-induced chromosomal aberration were analyzed by atomic force microscopy. Methods: Normal and irradiated chromosomes of human peripheral blood lymphocytes were prepared, then three-dimensional structure and height of chromosomes were analyzed by atomic force microscopy. Results: Three-dimensional structures of normal chromosomes and dicentric aberration in irradiated chromosomes were observed clearly. The data of chromosome height were helpful to recognizing the dicentric aberrations. Conclusion: Atomic force microscopy providing three-dimension image and linear measurement is a new and valuable tool for structural analysis of radiation-induced chromosomal aberrations

  1. Toward Improved Force-Field Accuracy through Sensitivity Analysis of Host-Guest Binding Thermodynamics

    Science.gov (United States)

    Yin, Jian; Fenley, Andrew T.; Henriksen, Niel M.; Gilson, Michael K.

    2015-01-01

    Improving the capability of atomistic computer models to predict the thermodynamics of noncovalent binding is critical for successful structure-based drug design, and the accuracy of such calculations remains limited by non-optimal force field parameters. Ideally, one would incorporate protein-ligand affinity data into force field parametrization, but this would be inefficient and costly. We now demonstrate that sensitivity analysis can be used to efficiently tune Lennard-Jones parameters of aqueous host-guest systems for increasingly accurate calculations of binding enthalpy. These results highlight the promise of a comprehensive use of calorimetric host-guest binding data, along with existing validation data sets, to improve force field parameters for the simulation of noncovalent binding, with the ultimate goal of making protein-ligand modeling more accurate and hence speeding drug discovery. PMID:26181208

  2. An artificial neural network approach and sensitivity analysis in predicting skeletal muscle forces.

    Science.gov (United States)

    Vilimek, Miloslav

    2014-01-01

    This paper presents the use of an artificial neural network (NN) approach for predicting the muscle forces around the elbow joint. The main goal was to create an artificial NN which could predict the musculotendon forces for any general muscle without significant errors. The input parameters for the network were morphological and anatomical musculotendon parameters, plus an activation level experimentally measured during a flexion/extension movement in the elbow. The muscle forces calculated by the 'Virtual Muscle System' provide the output. The cross-correlation coefficient expressing the ability of an artificial NN to predict the "true" force was in the range 0.97-0.98. A sensitivity analysis was used to eliminate the less sensitive inputs, and the final number of inputs for a sufficient prediction was nine. A variant of an artificial NN for a single specific muscle was also studied. The artificial NN for one specific muscle gives better results than a network for general muscles. This method is a good alternative to other approaches to calculation of muscle force.

  3. Analysis of forces on core structures during a loss-of-coolant accident. Final report

    International Nuclear Information System (INIS)

    Griggs, D.P.; Vilim, R.B.; Wang, C.H.; Meyer, J.E.

    1980-08-01

    There are several design requirements related to the emergency core cooling which would follow a hypothetical loss-of-coolant accident (LOCA). One of these requirements is that the core must retain a coolable geometry throughout the accident. A possible cause of core damage leading to an uncoolable geometry is the action of forces on the core and associated support structures during the very early (blowdown) stage of the LOCA. An equally unsatisfactory design result would occur if calculated deformations and failures were so extensive that the geometry used for calculating the next stages of the LOCA (refill and reflood) could not be known reasonably well. Subsidiary questions involve damage preventing the operation of control assemblies and loss of integrity of other needed safety systems. A reliable method of calculating these forces is therefore an important part of LOCA analysis. These concerns provided the motivation for the study. The general objective of the study was to review the state-of-the-art in LOCA force determination. Specific objectives were: (1) determine state-of-the-art by reviewing current (and projected near future) techniques for LOCA force determination, and (2) consider each of the major assumptions involved in force determination and make a qualitative assessment of their validity

  4. [Comparison of cell elasticity analysis methods based on atomic force microscopy indentation].

    Science.gov (United States)

    Wang, Zhe; Hao, Fengtao; Chen, Xiaohu; Yang, Zhouqi; Ding, Chong; Shang, Peng

    2014-10-01

    In order to investigate in greater detail the two methods based on Hertz model for analyzing force-distance curve obtained by atomic force microscopy, we acquired the force-distance curves of Hela and MCF-7 cells by atomic force microscopy (AFM) indentation in this study. After the determination of contact point, Young's modulus in different indentation depth were calculated with two analysis methods of "two point" and "slope fitting". The results showed that the Young's modulus of Hela cell was higher than that of MCF-7 cell,which is in accordance with the F-actin distribution of the two types of cell. We found that the Young's modulus of the cells was decreased with increasing indentation depth and the curve trends by "slope fitting". This indicated that the "slope fitting" method could reduce the error caused by the miscalculation of contact point. The purpose of this study was to provide a guidance for researcher to choose an appropriate method for analyzing AFM indentation force-distance curve.

  5. Rigorous analysis of image force barrier lowering in bounded geometries: application to semiconducting nanowires

    International Nuclear Information System (INIS)

    Calahorra, Yonatan; Mendels, Dan; Epstein, Ariel

    2014-01-01

    Bounded geometries introduce a fundamental problem in calculating the image force barrier lowering of metal-wrapped semiconductor systems. In bounded geometries, the derivation of the barrier lowering requires calculating the reference energy of the system, when the charge is at the geometry center. In the following, we formulate and rigorously solve this problem; this allows combining the image force electrostatic potential with the band diagram of the bounded geometry. The suggested approach is applied to spheres as well as cylinders. Furthermore, although the expressions governing cylindrical systems are complex and can only be evaluated numerically, we present analytical approximations for the solution, which allow easy implementation in calculated band diagrams. The results are further used to calculate the image force barrier lowering of metal-wrapped cylindrical nanowires; calculations show that although the image force potential is stronger than that of planar systems, taking the complete band-structure into account results in a weaker effect of barrier lowering. Moreover, when considering small diameter nanowires, we find that the electrostatic effects of the image force exceed the barrier region, and influence the electronic properties of the nanowire core. This study is of interest to the nanowire community, and in particular for the analysis of nanowire I−V measurements where wrapped or omega-shaped metallic contacts are used. (paper)

  6. Insect Repellents: Protect Your Child from Insect Bites

    Science.gov (United States)

    ... Español Text Size Email Print Share Choosing an Insect Repellent for Your Child Page Content Mosquitoes, biting ... sunscreen needs to be reapplied often. Reactions to Insect Repellents If you suspect that your child is ...

  7. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... hair, and nail care Skin care Hair care / hair loss Injured skin Nail care Anti-aging skin care ... hair, and nail care Skin care Hair care / hair loss Injured skin Blisters Bug bites and stings How ...

  8. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Part 1: Structure Part 2: Origin Part 3: Function Textbook Study notes Image library 3-D animated ... nail care Injured skin Bug bites and stings "); (function () { var a = "", b = [ "adid=aad-aad-1", "site= ...

  9. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Excellence in Dermatopathology™ Excellence in Pediatric Dermatology™ Donate Search Menu Donate Member resources and programs Member benefits ... to bites and stings FIND A DERMATOLOGIST Advanced Search "); (function () { var a = "", b = [ "adid=aad-aad-6", " ...

  10. Venomous Snake Bite Injuries at Kitui District Hospital

    African Journals Online (AJOL)

    were school going children who lived in houses mostly made of .... Children and students accounted for 60% of all victims. Farmers 40%. ... family member. Table 1. .... due to its dry and hot climate. .... snake bite and treatment-seeking behavior.

  11. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Choosing Wisely Education Online Learning Center MOC Recognized Credit Basic Derm Curriculum Teaching and learning guides Suggested ... it’s important to take steps to reduce your risk. To help prevent bug bites, dermatologists recommend the ...

  12. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... your head About nails: More important than you think Questions lots of kids ask about their skin, ... bites are harmless, some can spread dangerous diseases like Zika virus, dengue, Lyme disease, and malaria. Particularly ...

  13. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... aging skin care Kids’ zone About skin: Your body's largest organ About hair: Not just on your ... bug bite, such as a rash, fever, or body aches, see your doctor or a board-certified ...

  14. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... to remove a tick How to treat a bee sting When to see a dermatologist Burns Frostbite ... following tips: For painful bites , such as a bee sting, take an over-the-counter painkiller, such ...

  15. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... and treatments Acne and rosacea Bumps and growths Color problems Contagious skin diseases Cosmetic treatments Dry / sweaty ... prevent bug bites, dermatologists recommend the following tips: Use insect repellent. To protect against mosquitoes, ticks and ...

  16. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... and Lectureship Clarence S. Livingood Award and Lectureship Marion B. Sulzberger Award and Lectureship Master Dermatologist Award Members ... skin Bug bites and stings "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs.con.aad. ...

  17. Rat-bite fever presenting with rash and septic arthritis.

    Science.gov (United States)

    Kanechorn Na Ayuthaya, Rajyani; Niumpradit, Nucha

    2005-11-01

    Rat-bite fever is an uncommon disease known for its endemicity to occur worldwide. Although most patients tend to develop mild symptoms with improvement from conventional antibiotics, it can progress with severe complications with a mortality rate as high as 13% without proper treatment. The authors report a complicated case of rat bite-fever involving a 61-year old woman who presented with fever petechial rash, and septic arthritis following a rat bite. Initially, multiple antibiotics were administered but were not effective. As a consequence, invasive procedures such as arthrotomy and joint debridement were done and prolonged antibiotic was administered until clinical resolution. Since many cases do not have a history of rat bite and may present with fever, rashes, and arthritis it is essential to distinguish it from other diseases. Here, the authors will provide details on the etiology, clinical manifestations, diagnosis, and management to aid prompt detection and treatment of the disease.

  18. etiology and pathogenesis of anterior open bite: a review

    African Journals Online (AJOL)

    2010-11-11

    Nov 11, 2010 ... bite is essential in the diagnosis, prevention and management of this malocclusion. ... Dental malocclusion may be congenital or develop as the child grows. .... uncommon in maxillofacial patients who present with. Le forte 1 ...

  19. Characterization of sucrose-negative Pasteurella multocida variants, including isolates from large-cat bite wounds

    DEFF Research Database (Denmark)

    Christensen, Henrik Grimmig; Bisgaard, Magne; Angen, Øystein

    2005-01-01

    To validate the identification of Pasteurella multocida-like bacteria negative for acid formation from sucrose, including isolates from bite wounds caused by large cats, 17 strains were phenotypically and genotypically characterized. Phylogenetic analysis of partially sequenced rpoB and infB genes...... showed the monophyly of the strains characterized and the reference strains of P. multocida. The sucrose-negative strains formed two groups, one related to reference strains of P. multocida and the other related to a separate species-like group (taxon 45 of Bisgaard). DNA-DNA hybridization further...... and the reference strains of P. multocida. Two strains isolated from leopard bite wounds were related to the type strain of P. dagmatis; however, they represented a new taxon (taxon 46 of Bisgaard), in accordance with their distinct phenotypic and genotypic identifications. The present study documents that sucrose-negative...

  20. Deep bite malocclusion: exploration of the skeletal and dental factors

    International Nuclear Information System (INIS)

    Bhateja, N.K.; Fida, M.; Shaikh, A.

    2016-01-01

    Correction of deep bite is crucial for maintenance of dental hard and soft tissue structures and for prevention of temporomandibular joint disorders. Exploration of underlying skeletal and dental factors is essential for efficient and individualized treatment planning. To date etiological factors of dental and skeletal deep bite have not been explored in Pakistani orthodontic patients. The objectives of this study were to explore frequencies of dental and skeletal etiological factors in deep bite patients and to determine correlations amongst dental and skeletal etiological factors of deep bite. Methods: The study included a total of 113 subjects (males=35; females=78) with no craniofacial syndromes or prior orthodontic treatment. Pre-treatment orthodontic records were used to evaluate various dental and skeletal parameters. Descriptive statistics of each parameter were calculated. The various study parameters were correlated using Pearson's Correlation. Results: Deep curve of Spee was most frequently seen factor of dental deep bite (72.6%), followed by increased coronal length of upper incisors (28.3%), retroclined upper incisors (17.7%), retroclined lower incisors (8%) and increased coronal length of lower incisors (5.3%). Decreased gonial angle was most commonly found factor of skeletal deep bite (43.4%), followed by decreased mandibular plane angle (27.4%) and maxillary plane's clockwise rotation (26.5%). Frankfort mandibular plane angle and gonial angle showed a strong positive correlation (r=0.66, p=0.000). Conclusions: Reduced gonial angle is most frequently seen skeletal factor, signifying the importance of angulation and growth of ramus in development of deep bite. Deep curve of Spee is most frequently seen dental etiological component in deep bite subjects, hence signifying the importance of intruding the lower anterior teeth. (author)

  1. Habitual biting of oral mucosa: A conservative treatment approach

    Directory of Open Access Journals (Sweden)

    Sarabjot Kaur Bhatia

    2013-01-01

    Full Text Available Chronic biting of oral mucosa is an innocuous self inflicted injury, commonly seen in children suffering from developmental and psychological problems and has rarely been reported in normal unaffected individuals. The management strategies vary from counseling, prescription of sedatives to different prosthetic shields. The paper highlights the efficacy of a simple approach using soft mouth guard in the management of self inflicted lesions due to habitual biting of oral mucosa in two normal healthy children.

  2. Electromagnetic analysis of transient disruption forces on the ITER shield modules

    International Nuclear Information System (INIS)

    Kotulski, J.D.; Coats, R.S.; Pasik, M.F.

    2007-01-01

    There are potential abnormal operating environments where the disruption of the plasma currents inside a tokamak induce eddy currents in the shield modules. These currents interact with the large magnetic fields to produce forces in the modules which could potentially cause mechanical failure in the modules and vacuum vessel. For this reason the design and qualification of the ITER shield modules requires appropriate high-fidelity electromagnetic simulations that capture the physics of these situations. These simulations need to include an accurate representation of the disruption currents as well as an accurate electromagnetic model of the shield modules. The purpose of this presentation is to describe the electromagnetic analysis that has been completed using the OPERA-3D product to characterize the forces on the shield modules allocated to the US. We first describe the electromagnetic model of the system which consists of the disruption currents and the shield modules attached to the vacuum vessel. The disruption currents are represented in OPERA-3D using superposition of a large number of solenoids with independent time variation to account for the spatial and temporal variation of the plasma current and position. In addition, the simplified electromagnetic model of the shield modules will be described and discussed. Once the modeling has been described the simulation results are presented. The force computation are also presented and the results discussed. These forces are then used by a mechanical analysis program to compute stresses and torques on a module during the disruption of the plasma currents. (orig.)

  3. Forced Response Analysis of a Fan with Boundary Layer Inlet Distortion

    Science.gov (United States)

    Bakhle, Milind A.; Reddy, T. S. R.; Coroneos, Rula M.

    2014-01-01

    Boundary layer ingesting propulsion systems have the potential to significantly reduce fuel burn for future generations of commercial aircraft, but these systems must be designed to overcome the challenge of high dynamic stresses in fan blades due to forced response. High dynamic stresses can lead to high cycle fatigue failures. High-fidelity computational analysis of the fan aeromechanics is integral to an ongoing effort to design a boundary layer ingesting inlet and fan for a wind-tunnel test. An unsteady flow solution from a Reynoldsaveraged Navier Stokes analysis of a coupled inlet-fan system is used to calculate blade unsteady loading and assess forced response of the fan to distorted inflow. Conducted prior to the mechanical design of a fan, the initial forced response analyses performed in this study provide an early look at the levels of dynamic stresses that are likely to be encountered. For the boundary layer ingesting inlet, the distortion contains strong engine order excitations that act simultaneously. The combined effect of these harmonics was considered in the calculation of the forced response stresses. Together, static and dynamic stresses can provide the information necessary to evaluate whether the blades are likely to fail due to high cycle fatigue. Based on the analyses done, the overspeed condition is likely to result in the smallest stress margin in terms of the mean and alternating stresses. Additional work is ongoing to expand the analyses to off-design conditions, on-resonance conditions, and to include more detailed modeling of the blade structure.

  4. Antigen-antibody biorecognition events as discriminated by noise analysis of force spectroscopy curves.

    Science.gov (United States)

    Bizzarri, Anna Rita; Cannistraro, Salvatore

    2014-08-22

    Atomic force spectroscopy is able to extract kinetic and thermodynamic parameters of biomolecular complexes provided that the registered unbinding force curves could be reliably attributed to the rupture of the specific complex interactions. To this aim, a commonly used strategy is based on the analysis of the stretching features of polymeric linkers which are suitably introduced in the biomolecule-substrate immobilization procedure. Alternatively, we present a method to select force curves corresponding to specific biorecognition events, which relies on a careful analysis of the force fluctuations of the biomolecule-functionalized cantilever tip during its approach to the partner molecules immobilized on a substrate. In the low frequency region, a characteristic 1/f (α) noise with α equal to one (flickering noise) is found to replace white noise in the cantilever fluctuation power spectrum when, and only when, a specific biorecognition process between the partners occurs. The method, which has been validated on a well-characterized antigen-antibody complex, represents a fast, yet reliable alternative to the use of linkers which may involve additional surface chemistry and reproducibility concerns.

  5. Scoliosis corrective force estimation from the implanted rod deformation using 3D-FEM analysis.

    Science.gov (United States)

    Abe, Yuichiro; Ito, Manabu; Abumi, Kuniyoshi; Sudo, Hideki; Salmingo, Remel; Tadano, Shigeru

    2015-01-01

    Improvement of material property in spinal instrumentation has brought better deformity correction in scoliosis surgery in recent years. The increase of mechanical strength in instruments directly means the increase of force, which acts on bone-implant interface during scoliosis surgery. However, the actual correction force during the correction maneuver and safety margin of pull out force on each screw were not well known. In the present study, estimated corrective forces and pull out forces were analyzed using a novel method based on Finite Element Analysis (FEA). Twenty adolescent idiopathic scoliosis patients (1 boy and 19 girls) who underwent reconstructive scoliosis surgery between June 2009 and Jun 2011 were included in this study. Scoliosis correction was performed with 6mm diameter titanium rod (Ti6Al7Nb) using the simultaneous double rod rotation technique (SDRRT) in all cases. The pre-maneuver and post-maneuver rod geometry was collected from intraoperative tracing and postoperative 3D-CT images, and 3D-FEA was performed with ANSYS. Cobb angle of major curve, correction rate and thoracic kyphosis were measured on X-ray images. Average age at surgery was 14.8, and average fusion length was 8.9 segments. Major curve was corrected from 63.1 to 18.1 degrees in average and correction rate was 71.4%. Rod geometry showed significant change on the concave side. Curvature of the rod on concave and convex sides decreased from 33.6 to 17.8 degrees, and from 25.9 to 23.8 degrees, respectively. Estimated pull out forces at apical vertebrae were 160.0N in the concave side screw and 35.6N in the convex side screw. Estimated push in force at LIV and UIV were 305.1N in the concave side screw and 86.4N in the convex side screw. Corrective force during scoliosis surgery was demonstrated to be about four times greater in the concave side than in convex side. Averaged pull out and push in force fell below previously reported safety margin. Therefore, the SDRRT maneuver was

  6. The management of animal bites in the United kingdom.

    Science.gov (United States)

    Evgeniou, E; Markeson, D; Iyer, S; Armstrong, A

    2013-01-01

    Animal bites represent a significant global health issue. The evidence in the literature regarding their management in many areas is conflicting and unclear. This project attempts to identify current evidence in the literature on the management of animal bites and assess if current practice in the United Kingdom is evidence based. A literature review on the management of animal bites was performed, and a national UK survey was contacted using a questionnaire based on the available evidence in the literature. The results from this survey show that 98% of plastic surgery units routinely use prophylactic antibiotics in all animal bite wounds; 58% close low-risk injuries primarily after initial washout, and there are conflicting opinions regarding the management of associated fractures and soft tissue injuries. The available data in the literature suggest that appropriate wound management is the most important factor for prevention of infection in animal bites. Antibiotic prophylaxis should only be given in high-risk wounds and primary closure should be performed in low-risk wounds. The management protocols of many plastic surgery units often diverge from the available evidence within the literature. On the basis of a thorough literature review, a guideline for the management of animal bites is presented. Future studies should investigate the management of associated fractures and soft tissue injuries.

  7. The impact of snake bite on household economy in Bangladesh.

    Science.gov (United States)

    Hasan, S M K; Basher, A; Molla, A A; Sultana, N K; Faiz, M A

    2012-01-01

    The present study aims to assess the different types of costs for treatment of snake bite patients, to quantify household economic impact and to understand the coping mechanisms required to cover the costs for snake bite patients in Bangladesh. The patients admitted to four tertiary level hospitals in Bangladesh were interviewed using structured questionnaires including health-care-related expenditures and the way in which the expenditures were covered. Of the snakes which bit the patients, 54.2% were non-venomous, 45.8% were venomous and 42.2% of the patients were given polyvalent antivenom. The total expenditure related to snake bite varies from US$4 (US$1 = Taka 72) to US$2294 with a mean of US$124 and the mean income loss was US$93. Expenditure for venomous snake bite was US$231, which is about seven times higher than non-venomous snake bite (US$34). The treatment imposes a major economic burden on affected families, especially in venomous snake bite cases.

  8. Sensitivity to bites by the bedbug, Cimex lectularius.

    Science.gov (United States)

    Reinhardt, K; Kempke, D; Naylor, R A; Siva-Jothy, M T

    2009-06-01

    Bedbugs are a public health problem and can cause significant economic losses, but little is known about the effects of bites on humans. We reviewed case reports and published papers on bedbug bites to assess the empirical basis of the commonly cited figure that only approximately 80% of the population are sensitive to bedbug bites. We found the sensitivity estimate to be based on only one study carried out 80 years ago. However, this study did not account for the now well-established fact that only repeated exposure to external allergens leads to skin reactions. In our sample, 18 of 19 persons showed a skin reaction after bedbug exposure, but in most cases only after repeated controlled exposure. With repeated exposure, the latency between bite and skin reactions decreased from approximately 10 days to a few seconds. Our results are relevant for the hospitality industry, where apparently increasing infestation rates are likely to lead to an increase in the number of tourists and hotel employees exposed to bedbugs. Medical and public health professionals may expect to see an increase in the prevalence of people with bedbug bite sensitivity. The significance of the delayed reaction time of skin to bites may also have implications in litigation cases where people seek compensation.

  9. First report of clinical presentation of a bite by a running spider, Philodromus sp. (Araneae: Philodromidae), with recommendations for spider bite management.

    Science.gov (United States)

    Coetzee, Maureen; Dippenaar, Ansie; Frean, John; Hunt, Richard H

    2017-06-30

    This article describes the clinical progression of symptoms over a period of 5 days of a bite inflicted by a Philodromus sp. spider. Commonly known as 'running spiders', these are not considered to be harmful to humans. This report, however, is the first description of an actual bite by a member of this group of spiders showing cytotoxic envenomation. Management of the bites should be as recommended for other cytotoxic spider bites.

  10. Prediction of Support Reaction Forces of ITA via Response Spectrum Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Jin Sung; Jeong, Joon Ho; Lee, Sang Jin; Oh, Jin Ho; Lee, Jong Min [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The irradiation targets are transferred along pipes between TTS (Target Transfer Station) and ITA (Irradiation Tube Assembly) by hydraulic forces. The ITA corresponds to the vertical guide tube for irradiation targets inside a reactor, and it penetrates the reactor structure. Because the ITA is classified into seismic category II, its structural integrity must be evaluated by the seismic analysis. To approach more realistic problem, the interaction between the ITA and the reactor structure must be considered. However, this paper is focused on the preliminary analysis, and it is simplified that only the response of the ITA caused by earthquake affects the reactor structure. The response of the ITA is predicted by the spectrum response analysis based on the FDRS (Floor Design Response Spectra) of KJRR. Finally, the reaction forces corresponding to the load transfer into the reactor structure are estimated by using ANSYS. In this study, the reaction forces due to the earthquake are estimated by the response spectrum analysis. For the saving computational time and resource required, the FE model with beam element is constructed, and it is confirmed that the accuracy of the solution is acceptable by comparing the results of the solid model.

  11. Magnetic Field Equivalent Current Analysis-Based Radial Force Control for Bearingless Permanent Magnet Synchronous Motors

    Directory of Open Access Journals (Sweden)

    Huangqiu Zhu

    2015-05-01

    Full Text Available Bearingless permanent magnet synchronous motors (BPMSMs, with all advantages of permanent magnet motors (PMSMs and magnetic bearings, have become an important research direction in the bearingless motor field. To realize a stable suspension for the BPMSM, accurate decoupling control between the electromagnetic torque and radial suspension force is indispensable. In this paper, a concise and reliable analysis method based on a magnetic field equivalent current is presented. By this analysis method, the operation principle is analyzed theoretically, and the necessary conditions to produce a stable radial suspension force are confirmed. In addition, mathematical models of the torque and radial suspension force are established which is verified by the finite element analysis (FEA software ANSYS. Finally, an experimental prototype of a 2-4 poles surface-mounted BPMSM is tested with the customized control strategy. The simulation and experimental results have shown that the motor has good rotation and suspension performance, and validated the accuracy of the proposed analysis method and the feasibility of the control strategy.

  12. Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

    Science.gov (United States)

    Malpica, Carlos A.; Lusardi, Jeff A.

    2013-01-01

    ratio. While these two studies produced boundaries for acceptable/unacceptable stick dynamics for rotorcraft, they were not able to provide guidance on how variations of the stick dynamics in the acceptable region impact handling qualities. More recently, a ground based simulation study [5] suggested little benefit was to be obtained from variations of the damping ratio for a side-stick controller exhibiting high natural frequencies (greater than 17 rad/s) and damping ratios (greater than 2.0). A flight test campaign was conducted concurrently on the RASCAL JUH-60A in-flight simulator and the ACT/FHS EC-135 in flight simulator [6]. Upon detailed analysis of the pilot evaluations the study identified a clear preference for a high damping ratio and natural frequency of the center stick inceptors. Side stick controllers were found to be less sensitive to the damping. While these studies have compiled a substantial amount of data, in the form of qualitative and quantitative pilot opinion, a fundamental analysis of the effect of the inceptor force-feel system on flight control is found to be lacking. The study of Ref. [6] specifically concluded that a systematic analysis was necessary, since discrepancies with the assigned handling qualities showed that proposed analytical design metrics, or criteria, were not suitable. The overall goal of the present study is to develop a clearer fundamental understanding of the underlying mechanisms associated with the inceptor dynamics that govern the handling qualities using a manageable analytical methodology.

  13. Correlation analysis for forced vibration test of the Hualien large scale seismic test (LSST) program

    International Nuclear Information System (INIS)

    Sugawara, Y.; Sugiyama, T.; Kobayashi, T.; Yamaya, H.; Kitamura, E.

    1995-01-01

    The correlation analysis for a forced vibration test of a 1/4-scale containment SSI test model constructed in Hualien, Taiwan was carried out for the case of after backfilling. Prior to this correlation analysis, the structural properties were revised to adjust the calculated fundamental frequency in the fixed base condition to that derived from the test results. A correlation analysis was carried out using the Lattice Model which was able to estimate the soil-structure effects with embedment. The analysis results coincide well with test results and it is concluded that the mathematical soil-structure interaction model established by the correlation analysis is efficient in estimating the dynamic soil-structure interaction effect with embedment. This mathematical model will be applied as a basic model for simulation analysis of earthquake observation records. (author). 3 refs., 12 figs., 2 tabs

  14. Automatic analysis of force distribution in multi-fingered articulated hands

    Science.gov (United States)

    Amani, Mahyar

    A kinematic and force analysis of multifingered, multijointed dexterous hands is presented. The analysis involves calculation of the basis for null space of the grasp matrix. An algorithm is developed to perform all necessary analyses of dexterous hands. All equality and inequality constraints are automatically formulated in a constraint matrix. These include unisense constraints, frictional constraints, and joint torque limits. The reduction of the constraint matrix into a compact form is also presented. The algorithm is written in Fortran and is user-friendly and capable of handling all practical grasping problems. Different types of contact may be examined, including soft finger contact and point contact with and without friction. The software can easily determine the feasibility of a grasp for a given set of contact forces/torques, and may potentially be combined with either routines to compute the optimum value of contact wrench intensities and joint torque values.

  15. Relationship of Source Selection Methods to Contract Outcomes: an Analysis of Air Force Source Selection

    Science.gov (United States)

    2015-12-01

    some occasions, performance is terminated early; this can occur due to either mutual agreement or a breach of contract by one of the parties (Garrett...Relationship of Source Selection Methods to Contract Outcomes: an Analysis of Air Force Source Selection December 2015 Capt Jacques Lamoureux, USAF...on the contract management process, with special emphasis on the source selection methods of tradeoff and lowest price technically acceptable (LPTA

  16. Magnetic field and force analysis of high Tc superconductor with flux flow and creep

    International Nuclear Information System (INIS)

    Yoshida, Yoshikatsu; Uesaka, Mitsuru; Miya, Kenzo

    1994-01-01

    This paper describes a new method for the magnetic force analysis of high T c superconductor based on the flux flow and creep model. The introduction of the artificial conductivity, which is used in the conventional method, is not needed. The CPU time requirement of the calculations is considerably lower than that in the case of the conventional method. Thereby the vibration of a levitated permanent magnet was numerically analyzed by taking into account the flux flow and creep

  17. Improving estimation of kinetic parameters in dynamic force spectroscopy using cluster analysis

    Science.gov (United States)

    Yen, Chi-Fu; Sivasankar, Sanjeevi

    2018-03-01

    Dynamic Force Spectroscopy (DFS) is a widely used technique to characterize the dissociation kinetics and interaction energy landscape of receptor-ligand complexes with single-molecule resolution. In an Atomic Force Microscope (AFM)-based DFS experiment, receptor-ligand complexes, sandwiched between an AFM tip and substrate, are ruptured at different stress rates by varying the speed at which the AFM-tip and substrate are pulled away from each other. The rupture events are grouped according to their pulling speeds, and the mean force and loading rate of each group are calculated. These data are subsequently fit to established models, and energy landscape parameters such as the intrinsic off-rate (koff) and the width of the potential energy barrier (xβ) are extracted. However, due to large uncertainties in determining mean forces and loading rates of the groups, errors in the estimated koff and xβ can be substantial. Here, we demonstrate that the accuracy of fitted parameters in a DFS experiment can be dramatically improved by sorting rupture events into groups using cluster analysis instead of sorting them according to their pulling speeds. We test different clustering algorithms including Gaussian mixture, logistic regression, and K-means clustering, under conditions that closely mimic DFS experiments. Using Monte Carlo simulations, we benchmark the performance of these clustering algorithms over a wide range of koff and xβ, under different levels of thermal noise, and as a function of both the number of unbinding events and the number of pulling speeds. Our results demonstrate that cluster analysis, particularly K-means clustering, is very effective in improving the accuracy of parameter estimation, particularly when the number of unbinding events are limited and not well separated into distinct groups. Cluster analysis is easy to implement, and our performance benchmarks serve as a guide in choosing an appropriate method for DFS data analysis.

  18. Breaking the Change Barrier: A 40 Year Analysis of Air Force Pilot Retention Solutions

    Science.gov (United States)

    national defense. A problem/solution research methodology using the organizational management theory of path dependence explored the implications of the...exodus is to start the incentive process earlier in the career and prior to the final decision to separate. Path dependent analysis indicates all prior... incentive options and personal involvement in the overall process. The Air Force can annually budget and forecast incentive requirements and personnel

  19. Specific binding of antigen-antibody in physiological environments: Measurement, force characteristics and analysis

    Science.gov (United States)

    Gu, Xin; Zhou, Jun; Zhou, Lu; Xie, Shusen; Petti, Lucia; Wang, Shaomin; Wang, Fuyan

    2018-05-01

    The specific recognition of the antigen by the antibody is the crucial step in immunoassays. Measurement and analysis of the specific recognition, including the ways in which it is influenced by external factors are of paramount significance for the quality of the immunoassays. Using prostate-specific antigen (PSA)/anti-PSA antibody and α-fetoprotein (AFP) /anti-AFP antibody as examples, we have proposed a novel solution for measuring the binding forces between the antigens and their corresponding antibodies in different physiological environments by combining laminar flow control technology and optical tweezers technology. On the basis of the experimental results, the different binding forces of PSA/anti-PSA antibody and AFP/anti-AFP antibody in the same phosphate-buffered saline (PBS) environments are analysed by comparing the affinity constant of the two antibodies and the number of antigenic determinants of the two antigens. In different electrolyte environments, the changes of the binding force of antigens-antibodies are explained by the polyelectrolyte effect and hydrophobic interaction. Furthermore, in different pH environments, the changes of binding forces of antigens-antibodies are attributed to the role of the denaturation of protein. The study aims to recognise the antigen-antibody immune mechanism, thus ensuring further understanding of the biological functions of tumour markers, and it promises to be very useful for the clinical diagnosis of early-stage cancer.

  20. Cat scratches, not bites, are associated with unipolar depression--cross-sectional study.

    Science.gov (United States)

    Flegr, Jaroslav; Hodný, Zdeněk

    2016-01-05

    A recent study performed on 1.3 million patients showed a strong association between being bitten by a cat and probability of being diagnosed with depression. Authors suggested that infection with cat parasite Toxoplasma could be the reason for this association. A cross sectional internet study on a non-clinical population of 5,535 subjects was undertaken. The subjects that reported having been bitten by a dog and a cat or scratched by a cat have higher Beck depression score. They were more likely to have visited psychiatrists, psychotherapists and neurologists in past two years, to have been previously diagnosed with depression (but not with bipolar disorder). Multivariate analysis of models with cat biting, cat scratching, toxoplasmosis, the number of cats at home, and the age of subjects as independent variables showed that only cat scratching had positive effect on depression (p = 0.004). Cat biting and toxoplasmosis had no effect on the depression, and the number of cats at home had a negative effect on depression (p = 0.021). Absence of association between toxoplasmosis and depression and five times stronger association of depression with cat scratching than with cat biting suggests that the pathogen responsible for mood disorders in animals-injured subjects is probably not the protozoon Toxoplasma gondii but another organism; possibly the agent of cat-scratched disease - the bacteria Bartonella henselae.

  1. Perception and personal protective measures toward mosquito bites by communities in Jaffna District, northern Sri Lanka.

    Science.gov (United States)

    Surendran, S N; Kajatheepan, A

    2007-06-01

    Mosquito-borne diseases are of public health importance in war-torn northern Sri Lanka. The severity of mosquito bites and attitudes of the public toward mosquito problems were investigated using a structured questionnaire among communities in 3 administrative divisions in Jaffna District. One hundred fifty-four households were interviewed during this study. Sixty-four percent of the respondents reported that the mosquito problem was severe in their localities. Fifty-two percent stated that mosquito-biting activity was severe in the evening (1500 h-1900 h), 41% at night (after 1900 h), and 7% throughout the day. Severity of mosquito menace was found to have no association with type of house construction. Seventy-seven percent were able to name at least 1 disease transmitted by mosquitoes. Statistical analysis showed no association between education level and public awareness on mosquito-borne diseases. Nearly 88% were able to identify at least a breeding source of mosquitoes and most of them practice measures to eliminate suitable environments for mosquito breeding. Ninety-six percent used personal protective measures against mosquito bites during some seasons or throughout the year. Mosquito coils were the most commonly used personal protective method followed by bed nets. The monthly expenditure for personal protective measures varied from US$0.19 (LKR 20) to US$3.40 (LKR 350).

  2. [Infections after bite wounds : For example rat bite fever due to Streptobacillus moniliformis].

    Science.gov (United States)

    Hof, Herbert; Binder, Rudolf; Schäfer, Christian; Stuber, Madeleine; Licht, Andreas; Bozenhardt-Stavrakidis, Iris; Bode, Konrad

    2018-04-11

    Rat bite fever due to Streptobacillus moniliformis induces typical but not pathognomonic clinical signs, such as local purulent wound infection followed by maculopapular exanthema, myalgia as well as purulent joint infections. Severe complications, such as osteomyelitis and endocarditis are possible. it seems that this infection is rarely diagnosed but this infection could be much more common because the final diagnostic proof is difficult to achieve. Firstly, the culture of these bacteria is critical because the bacteria are fastidious and secondly the exact differentiation of the isolates is hardly possible by standard laboratory methods. Modern techniques such as mass spectroscopy (MALDI-TOF) and molecular biology allow a precise clarification. Surgical cleansing of infection sites in combination with a rational antibiotic therapy, for example with beta-lactam antibiotics, are generally able to cure the infection if treatment is started early enough. In addition, vaccinations, for example against tetanus and rabies have to be considered in this situation as for all other bite wound infections.

  3. Finite Element Analysis of the Vertical Levitation Force in an Electrostatic MEMS Comb Drive Actuator

    International Nuclear Information System (INIS)

    Wooldridge, J; Blackburn, J; Muniz-Piniella, A; Stewart, M; Shean, T A V; Weaver, P M; Cain, M G

    2013-01-01

    A vertical levitation electrostatic comb drive actuator was manufactured for the purpose of measuring piezoelectric coefficients in small-scale materials and devices. Previous modelling work on comb drive levitation has focussed on control of the levitation in standard poly-silicon devices in order to minimize effects on lateral modes of operation required for the accelerometer and gyroscope applications. The actuator developed in this study was manufactured using a 20 μm electroplated Ni process with a 25 μm trench created beneath the released structure through chemical wet etching. A finite element analysis using ZINC was used to model electrostatic potential around a cross section of one static and one movable electrode, from which the net levitation force per unit electrode was calculated. The model was first verified using the electrode geometry from previously studied systems, and then used to study the variation of force as a function of decreasing substrate-electrode distance. With the top electrode surfaces collinear the calculated force density is 0.00651 ε 0 V 2 M μm −1 , equivalent to a total force for the device of 36.4 μN at an applied voltage of V M =100 V, just 16% larger than the observed value. The measured increase in force with distance was smaller than predicted with the FEA, due to the geometry of the device in which the electrodes at the anchored ends of the supporting spring structure displace by a smaller amount than those at the centre

  4. Parameter sensitivity analysis of nonlinear piezoelectric probe in tapping mode atomic force microscopy for measurement improvement

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, Rachael; Nima Mahmoodi, S., E-mail: nmahmoodi@eng.ua.edu [Department of Mechanical Engineering, The University of Alabama, Box 870276, Tuscaloosa, Alabama 35487 (United States)

    2014-02-21

    The equations of motion for a piezoelectric microcantilever are derived for a nonlinear contact force. The analytical expressions for natural frequencies and mode shapes are obtained. Then, the method of multiple scales is used to analyze the analytical frequency response of the piezoelectric probe. The effects of nonlinear excitation force on the microcantilever beam's frequency and amplitude are analytically studied. The results show a frequency shift in the response resulting from the force nonlinearities. This frequency shift during contact mode is an important consideration in the modeling of AFM mechanics for generation of more accurate imaging. Also, a sensitivity analysis of the system parameters on the nonlinearity effect is performed. The results of a sensitivity analysis show that it is possible to choose parameters such that the frequency shift minimizes. Certain parameters such as tip radius, microcantilever beam dimensions, and modulus of elasticity have more influence on the nonlinearity of the system than other parameters. By changing only three parameters—tip radius, thickness, and modulus of elasticity of the microbeam—a more than 70% reduction in nonlinearity effect was achieved.

  5. Microscopic analysis of the non-dissipative force on a line vortex in a superconductor

    International Nuclear Information System (INIS)

    Gaitan, F.

    1994-12-01

    A microscopic analysis of the non-dissipative force F nd acting on a line vortex in a type-II superconductor at T = 0 is given. All work presented assumes a charged BCS superconductor. We first examine the Berry phase induced in the BCS superconducting ground state by movement of the vortex and show how this phase enters into the hydro-dynamic action S hyd of the superconducting condensate. Appropriate variation of S hyd gives F nd and variation of the Berry phase term is seen to contribute the Magnus or lift force of classical hydrodynamics to F nd . This analysis, based on the BCS ground state of a charged superconductor, confirms in detail the arguments of Ao and Thouless within the context of the BCS model. Our Berry phase, in the limit e → 0, is seen to reproduce the Berry phase determined by these authors for a neutral superfluid. We also provide a second, independent, determination on F nd through a microscopic derivation of the continuity equation for the condensate linear momentum. This equation yields the acceleration equation for the superflow and shows that the vortex acts as a sink for the condensate linear momentum. The rate at which momentum is lost to the vortex determines F nd in this second approach and the result obtained agrees identically with the previous Berry phase calculation. The Magnus force contribution to F nd is seen in both calculations to be a consequence of the vortex topology and motion. (author). 10 refs

  6. Analysis Of Default Passwords In Routers Against Brute-Force Attack

    Directory of Open Access Journals (Sweden)

    Mohammed Farik

    2015-08-01

    Full Text Available Abstract Password authentication is the main means of access control on network routers and router manufacturers provide a default password for initial login to the router. While there has been many publications regarding the minimum requirements of a good password how widely the manufacturers themselves are adhering to the minimum standards and whether these passwords can withstand brute-force attack are not widely known. The novelty of this research is that this is the first time default passwords have been analyzed and documented from such a large variety of router models to reveal password strengths or weaknesses against brute-force attacks. Firstly individual default router password of each model was collected tabulated and tested using password strength meter for entropy. Then descriptive statistical analysis was performed on the tabulated data. The analysis revealed quantitatively how strong or weak default passwords are against brute-force attacks. The results of this research give router security researchers router manufacturers router administrators a useful guide on the strengths and weaknesses of passwords that follow similar patterns.

  7. Reconsideration of dynamic force spectroscopy analysis of streptavidin-biotin interactions.

    Science.gov (United States)

    Taninaka, Atsushi; Takeuchi, Osamu; Shigekawa, Hidemi

    2010-05-13

    To understand and design molecular functions on the basis of molecular recognition processes, the microscopic probing of the energy landscapes of individual interactions in a molecular complex and their dependence on the surrounding conditions is of great importance. Dynamic force spectroscopy (DFS) is a technique that enables us to study the interaction between molecules at the single-molecule level. However, the obtained results differ among previous studies, which is considered to be caused by the differences in the measurement conditions. We have developed an atomic force microscopy technique that enables the precise analysis of molecular interactions on the basis of DFS. After verifying the performance of this technique, we carried out measurements to determine the landscapes of streptavidin-biotin interactions. The obtained results showed good agreement with theoretical predictions. Lifetimes were also well analyzed. Using a combination of cross-linkers and the atomic force microscope that we developed, site-selective measurement was carried out, and the steps involved in bonding due to microscopic interactions are discussed using the results obtained by site-selective analysis.

  8. Use of clear aligners in open bite cases: an unexpected treatment option.

    Science.gov (United States)

    Giancotti, Aldo; Garino, Francesco; Mampieri, Gianluca

    2017-06-01

    In open bite case treatments, a proper diagnostic differentiation is essential in determining the appropriate corrective procedures. Dental open bites are generally more responsive to treatment with orthodontics alone, whereas skeletal open bites often require a combination of orthodontics and orthognathic surgery. Patient selection and treatment principles for non-surgical open bite treatment routinely include fixed appliances both labial or lingual. However, removable clear aligners have gained a consistent popularity in the treatment of complex cases including open bite malocclusions. In this article, the authors describe three different clinical cases in which open bite cases had been satisfactorily treated by using clear aligners.

  9. Bite-outs and other depletions of mesospheric electrons

    Science.gov (United States)

    Friedrich, Martin; Rapp, Markus; Plane, John M.C.; Torkar, Klaus M.

    2011-01-01

    The ionised mesosphere is less understood than other parts of the ionosphere because of the challenges of making appropriate measurements in this complex region. We use rocket borne in situ measurements of absolute electron density by the Faraday rotation technique and accompanying DC-probe measurements to study the effect of particles on the D-region charge balance. Several examples of electron bite-outs, their actual depth as well as simultaneous observations of positive ions are presented. For a better understanding of the various dependencies we use the ratio β/αi (attachment rate over ion–ion recombination coefficient), derived from the electron and ion density profiles by applying a simplified ion-chemical scheme, and correlate this term with solar zenith angle and moon brightness. The probable causes are different for day and night; recent in situ measurements support existing hypotheses for daytime cases, but also reveal behaviour at night hitherto not reported in the literature. Within the large range of β/αi values obtained from the analysis of 28 high latitude night flights one finds that the intensity of scattered sunlight after sunset, and even moonlight, apparently can photodetach electrons from meteoric smoke particles (MSP) and molecular anions. The large range of values itself can best be explained by the variability of the MSPs and by occasionally occurring atomic oxygen impacting on the negative ion chemistry in the night-time mesosphere under disturbed conditions. PMID:27570472

  10. Analysis of Electromagnetics Forces on Magnetically Suspended High-Speed Trains

    Directory of Open Access Journals (Sweden)

    Daniel Mayer

    2004-01-01

    Full Text Available High-speed superexpresses (HSST developed by Japanese airlines (JAL are based on the electrodynamics principle of magnetic suspension. The track contains short-circuited coils and interaction between them and superconductive coils in the vehicle produces its suspension. The paper includes a mathematical model for traction electrodynamics suspension device HSST represented by a system of linear differential equations with coefficients varying in time. Numerical analysis of this model fields the velocity-dependent lift and drag forces acting on the system. The time distribution of the lift force exhibits certain oscillations that may be suppressed by suitable placement of several superconductive levitation wings in the vehicle. The results obtained are in a good agreement with the knowledge found by various authors on prototype vehicles.

  11. Analysis of the neutral drag force in a dc glow discharge dusty plasma

    International Nuclear Information System (INIS)

    Thomas, Edward Jr.; Williams, Jeremiah

    2005-01-01

    In this paper, the authors report on a series of experiments that use carefully applied perturbations to a dust cloud to reproducibly investigate the formation of the microparticle cloud and the formation of dust cloud-plasma interface. Here, one micron diameter alumina microparticles are suspended in an argon dc glow discharge plasma. A perturbing voltage pulse is applied to the cathode, causing a momentary disruption in the confinement of the dust cloud. After the perturbation, the cloud reforms, typically with a central 'mass' and two 'streams' of particles that are flowing into the cloud from both sides. Through the use of stereoscopic particle image velocimetry (stereo-PIV), the complete three-dimensional velocity of the microparticles can be measured. The particles in the streams are used as test particles to characterize the forces acting upon the microparticles. Analysis of the experimental measurements suggests that the effective neutral drag force may be lower than expected

  12. ANALYSIS OF CUTTING FORCE AND CHIP MORPHOLOGY DURING HARD TURNING OF AISI D2 STEEL

    Directory of Open Access Journals (Sweden)

    X. M. ANTHONY

    2015-03-01

    Full Text Available In this research work AISI D2 tool steel at a hardness of 55 HRC is being used for experimental investigation. Cutting speed, feed rate and depth of cut are the cutting parameters considered for the experimentation along with tool geometry namely, nose radius, clearance angle and rake angle. Three different cutting tool materials are used for experimentation namely multicoated carbide, cermet and ceramic inserts. The cutting force generated during the machining process is being measured using Kistler dynamometer and recorded for further evaluation. The chips produced during the machining process for every experimental trail is also collected for understanding the chip morphology. Based on the experimental data collected Analysis of Variance (ANOVA was conducted to understand the influence of all cutting parameters and tool geometry on cutting force.

  13. Nonlinear FE analysis of reinforced concrete panels subjected to in-plane force

    International Nuclear Information System (INIS)

    Lee, H. P.; Lee, S. J.; Jun, Y. S.; Su, J. M.

    2003-01-01

    Reinforced concrete structures subjected to in-plane force exhibit strong nonlinear behaviour due to complex material properties, cracks, interactions between concrete and steel and shear transfer exists in crack surface. Especially if there is crack formations, nonlinear behaviour increases. Thus the prediction of nonlinear behaviour of reinforced concrete includes failure or crushing is very difficult task. Various constitutive equations for concrete stress-strain relationship to predict nonlinear behaviour of reinforced concrete have been proposed. But the study for reinforced concrete analysis model using plastic material model is still demanded. So the purpose of this research is to formulate standard 8-node shell element using plasticity material model for concrete and to analyze nonlinear behaviour of RC panel subjected to in-plane force

  14. Passive microrheology of soft materials with atomic force microscopy: A wavelet-based spectral analysis

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Torres, C.; Streppa, L. [CNRS, UMR5672, Laboratoire de Physique, Ecole Normale Supérieure de Lyon, 46 Allée d' Italie, Université de Lyon, 69007 Lyon (France); Arneodo, A.; Argoul, F. [CNRS, UMR5672, Laboratoire de Physique, Ecole Normale Supérieure de Lyon, 46 Allée d' Italie, Université de Lyon, 69007 Lyon (France); CNRS, UMR5798, Laboratoire Ondes et Matière d' Aquitaine, Université de Bordeaux, 351 Cours de la Libération, 33405 Talence (France); Argoul, P. [Université Paris-Est, Ecole des Ponts ParisTech, SDOA, MAST, IFSTTAR, 14-20 Bd Newton, Cité Descartes, 77420 Champs sur Marne (France)

    2016-01-18

    Compared to active microrheology where a known force or modulation is periodically imposed to a soft material, passive microrheology relies on the spectral analysis of the spontaneous motion of tracers inherent or external to the material. Passive microrheology studies of soft or living materials with atomic force microscopy (AFM) cantilever tips are rather rare because, in the spectral densities, the rheological response of the materials is hardly distinguishable from other sources of random or periodic perturbations. To circumvent this difficulty, we propose here a wavelet-based decomposition of AFM cantilever tip fluctuations and we show that when applying this multi-scale method to soft polymer layers and to living myoblasts, the structural damping exponents of these soft materials can be retrieved.

  15. Analysis of forced convective transient boiling by homogeneous model of two-phase flow

    International Nuclear Information System (INIS)

    Kataoka, Isao

    1985-01-01

    Transient forced convective boiling is of practical importance in relation to the accident analysis of nuclear reactor etc. For large length-to-diameter ratio, the transient boiling characteristics are predicted by transient two-phase flow calculations. Based on homogeneous model of two-phase flow, the transient forced convective boiling for power and flow transients are analysed. Analytical expressions of various parameters of transient two-phase flow have been obtained for several simple cases of power and flow transients. Based on these results, heat flux, velocity and time at transient CHF condition are predicted analytically for step and exponential power increases, and step, exponential and linear velocity decreases. The effects of various parameters on heat flux, velocity and time at transient CHF condition have been clarified. Numerical approach combined with analytical method is proposed for more complicated cases. Solution method for pressure transient are also described. (author)

  16. Biomechanical analysis of the effect of occlusal force on osteosynthesis following sagittal split ramus osteotomy

    International Nuclear Information System (INIS)

    Okuda, Katsuya; Nakajima, Masahiro; Kakudo, Kenji

    2009-01-01

    Relapse is sometimes observed during the postoperative course following sagittal split ramus osteotomy which is widely used to correct jaw deformities. Relapse may be caused by biomechanical factors such as the postoperative occlusal force. We evaluated serial changes in the stress distribution associated with postoperative occlusal force and jaw-closing pressure on the mandible and osteosynthesis plate using three-dimensional finite element analysis. Based on CT data, we produced mandibular models 1, 3, 6, and 12 months after sagittal split ramus osteotomy, and subjected them to simulated occlusal force and jaw-closing pressure. Changes in equivalent stress in the proximal and distal segments, at the osteosynthesis site, and the fixation plate were evaluated by three-dimensional finite element analysis. The equivalent stresses in the proximal and distal segments slightly increased over time from 1 to 12 months after the operation. In particular, marked stress concentration was observed at the anterior border of the ramus at each measurement area. Stress at the osteosynthesis site increased from 1 to 6 months after the operation, but decreased after 12 months. As a result of postoperative occlusal forces and jaw-closing pressure, stress was concentrated at the anterior border of the ramus in the proximal segment. Between 3 and 6 months after the operation, tensile stress was concentrated at the upper and lower ends of the osteotomy line at the osteosynthesis site. These biomechanical findings indicate the application of clockwise stress on the distal segment up to 6 months after the operation. We concluded that sagittal split ramus osteotomy runs the risk of relapse between 3 and 6 months after the operation. (author)

  17. Analysis of cutting force signals by wavelet packet transform for surface roughness monitoring in CNC turning

    Science.gov (United States)

    García Plaza, E.; Núñez López, P. J.

    2018-01-01

    On-line monitoring of surface finish in machining processes has proven to be a substantial advancement over traditional post-process quality control techniques by reducing inspection times and costs and by avoiding the manufacture of defective products. This study applied techniques for processing cutting force signals based on the wavelet packet transform (WPT) method for the monitoring of surface finish in computer numerical control (CNC) turning operations. The behaviour of 40 mother wavelets was analysed using three techniques: global packet analysis (G-WPT), and the application of two packet reduction criteria: maximum energy (E-WPT) and maximum entropy (SE-WPT). The optimum signal decomposition level (Lj) was determined to eliminate noise and to obtain information correlated to surface finish. The results obtained with the G-WPT method provided an in-depth analysis of cutting force signals, and frequency ranges and signal characteristics were correlated to surface finish with excellent results in the accuracy and reliability of the predictive models. The radial and tangential cutting force components at low frequency provided most of the information for the monitoring of surface finish. The E-WPT and SE-WPT packet reduction criteria substantially reduced signal processing time, but at the expense of discarding packets with relevant information, which impoverished the results. The G-WPT method was observed to be an ideal procedure for processing cutting force signals applied to the real-time monitoring of surface finish, and was estimated to be highly accurate and reliable at a low analytical-computational cost.

  18. Epidemiological study of insect bite reactions from Central India

    Directory of Open Access Journals (Sweden)

    Sumit Kar

    2013-01-01

    Full Text Available Introduction: The physical effects of the arthropod bites on human skin receive less attention, especially in the rural areas where the per capita income is less. Ours is a rural-based hospital, the vicinity having more of plants, trees, and forests; we undertook the study to find out the relation of insect bite dermatitis in a rural area. Materials and Methods: The study was carried out in the Dermatology outpatient department of our institute on 100 subjects of insect bite dermatitis who were questioned retrospectively about the sequence of events besides their environmental and living conditions. They were examined thoroughly and the relevant clinical findings were noted, also taking into account the prior treatment taken by them, if any. Results and Conclusions: It was found that insect bite dermatitis has no age or gender preponderance, and the protective factors for the same are use of full sleeve clothes and keeping the doors and windows closed at night. On the contrary, the risk factors are residence in areas of heavy insect infestation, use of perfumes and colognes, warm weather in spring and summer and the lack of protective measures. However, there was no direct association of atopy with increased risk of developing insect bite dermatitis.

  19. Facial dog bite injuries in children: A case report

    Directory of Open Access Journals (Sweden)

    Alessandro Leite Cavalcanti

    Full Text Available Introduction: Dog bites are common and can affect victims of different ages, from children to the elderly. Injuries are usually located in different body regions, including head and face. The treatment of choice for injuries is the suture of the lesion, accompanied by antibiotic therapy and tetanus and anti-rabies vaccination. Presentation of case: An 11-year-old male black patient was admitted to the Surgery and Maxillo-Facial Traumatology Service, on an urgent basis, victim of domestic animal aggression (dog biting. The child had multiple and extensive lesions on the face, trauma with laceration with loss of substance, involving the left genic region, lower and upper lip, and lower gingival-labial sulcus. Discussion: Smaller children are especially vulnerable to injuries in the craniofacial region due their low stature, propensity to crawl/play on the ground and exploratory behavior. The primary treatment of bites is by means of direct suture, grafting or local flaps, depending on the type of wound and the surgeon's decision, regardless of time elapsed from the attack. Conclusion: This case shows a case of a child patient victim of animal bite, with lesions limited to the region of the face. The patient was followed up for a month and showed good wound healing without any complications. Keywords: Wounds and injuries, Bites and stings, Maxillofacial injuries, Dogs

  20. Efficacy of topical permethrin as repellent against Aedes aegypti's bites.

    Science.gov (United States)

    Miot, Hélio Amante; Ferreira, Daniela Pinho; Mendes, Fabiana Guandalini; Carrenho, Flávia Roberta Hernandes; de Oliveira Amui, Isabela; Carneiro, Carlos Augusto Sá; Madeira, Newton Goulart

    2008-07-15

    Mosquitoes are the most important vectors of infectious diseases and their bites are related to several adverse skin reactions. Permethrin impregnated clothes are an efficient strategy against arthropods' bites; however, its topical efficacy as a repellent has not been well established. We studied the response to permethrin lotion 5 percent and N,N-Diethyl-meta-toluamide (DEET) spray 50 percent applied to the unprotected forearms of 10 volunteers. Each arm was exposed to 20 female mosquitoes of Aedes aegypti. We performed 71 bilateral comparative measurements evaluating the timing for the first bites. The average times for the arm without the product, with permethrin 5 percent, and with DEET 50 percent were: 7.9 seconds, 336.2 seconds and 7512.1 seconds. The results showed a significant difference between repellency times between either product and unprotected controls. In addition, there was a significant difference in time to first bite between permethrin and DEET treated arms (pAedes aegypti bites in this experimental setting. However, permethrin's profile of repellency was significantly inferior to that of DEET.

  1. Mosquito bite anaphylaxis: immunotherapy with whole body extracts.

    Science.gov (United States)

    McCormack, D R; Salata, K F; Hershey, J N; Carpenter, G B; Engler, R J

    1995-01-01

    Adverse reactions to mosquito bites have been recognized for some time. These usually consist of large local swellings and redness, generalized urticaria, angioedema and less easily definable responses such as nausea, dizziness, headaches, and lethargy. We report two patients who experienced systemic anaphylaxis from mosquito bites. Both were skin tested and given immunotherapy using whole body mosquito extracts. Skin testing using whole body mosquito extracts was positive to Aedes aegypti at 1/1,000 weight/volume (wt/vol) in one patient and to Aedes aegypti at 1/100,000 wt/vol, and Culex pipiens at 1/10,000 wt/vol in the other. Skin testing of ten volunteers without a history of adverse reactions to mosquito bites was negative. Immunotherapy using these extracts resulted in resolution of adverse reactions to mosquito bites in one patient and a decrease in reactions in the other. Immunotherapy with whole body mosquito extracts is a viable treatment option that can play a role in patients with mosquito bite-induced anaphylaxis. It may also result in severe side effects and one must determine the benefit versus risks for each individual patient.

  2. Kissing Bug ( spp. Intrusion into Homes: Troublesome Bites and Domiciliation

    Directory of Open Access Journals (Sweden)

    Stephen A. Klotz

    2016-01-01

    Full Text Available Kissing bugs ( Triatoma spp. frequently enter homes and bite human and pet occupants. Bites may lead to severe allergic reactions and, in some cases, death. Kissing bugs are also vectors of Trypanosoma cruzi , the cause of Chagas disease. In general, modern houses in the United States are not conducive to domiciliation of kissing bugs (bugs living out their entire life within the home with the presence of eggs, nymphs, adults, and exuviae. Construction features such as concrete foundations, solid walls and ceilings, window screens, tight thresholds for doors and windows, and other measures impede bug entry into homes, and air conditioning reduces the need for open doors and windows. Where Chagas disease is endemic in Mexico and Central and South America, homes often have thatch roofs, adobe walls, and open doors and windows. We investigated numerous instances of kissing bug intrusions into homes in Southern Arizona, California, and Louisiana and documented the reactions to kissing bug bites. Our work confirms the importance of modern home construction in limiting kissing bug intrusions. Older homes, especially those lacking modern screening, caulking, and weather stripping to reduce air leakage, may be subject to kissing bug intrusions and domiciliation. We describe a community in Southern Arizona where domiciliation of homes by Triatoma recurva is common. We also provide recent data regarding kissing bug bites and allergic reactions to the bites.

  3. Possible transmission of HIV Infection due to human bite

    Directory of Open Access Journals (Sweden)

    Bandivdekar Atmaram H

    2011-03-01

    Full Text Available Abstract The potential risk of HIV-1 infection following human bite although epidemiologically insignificant, but it is biologically possible. There are anecdotal reports of HIV transmission by human bites particularly if saliva is mixed with blood. The oral tissues support HIV replication and may serve as a previously unrecognized HIV reservoir. The HIV infected individuals have more viruses in blood than saliva, possibly due to the potent HIV-inhibitory properties of saliva. The case presented here is of a primary HIV infections following a human bite where in the saliva was not blood stained but it got smeared on a raw nail bed of a recipient. The blood and saliva of the source and blood of the recipient showed a detectable viral load with 91% sequence homology of C2-V3 region of HIV gp120 between the two individuals. The recipient did not receive PEP [post exposure prophylaxis] as his family physician was unaware of salivary transmission. The family physician should have taken PEP decision after proper evaluation of the severe and bleeding bite. Hence it is necessary to treat the HIV infected human bites with post exposure prophylaxis.

  4. [Prevalence of cross-bite in Mexican children].

    Science.gov (United States)

    Ojeda León, S; De la Teja Angeles, E

    1990-10-01

    As observed, the problem of lining and accommodation of teeth in the child population is increasingly larger. This fact prompted the authors to attempt determining the prevalence of cross-bite in a sample of Mexican children. A total of 306 patients, aged between two and 17 and attending the Stomatology service of the National Institute of Pediatrics, were evaluated, from which all pertinent data regarding age, sex, molar-temporal relationship (terminal, rectus, distal, messial and exaggerated messial planes), permanent molar status (Angle I, II, III), cross-bite, type of dentition affected (primary, mixed or permanent), cross-bite classification (anterior, posterior or mixed), whether unilateral, bilateral, dental or skeletal, right or left, and number of teeth affected, were duly recorded. Out of 306 evaluated patients (160 males, 146 female), 112 evidenced cross-bite (36.6%), 56 of each sex; in 69.6% the teeth were anterior, in 17.8% they were posterior, and in 15.5% their position was mixed. Their average age was 8 years, and malocclusion was Angle class I. From this experience, it is to be concluded that early detection and correction of any dental occlusion abnormality will permit correcting defects in dentofacial development; it is thus necessary to ascertain the frequency of cross-bite.

  5. How to Stop Biting Your Nails

    Medline Plus

    Full Text Available ... Awards World Congress of Dermatology Volunteer opportunities Academy councils, committees, and task forces AccessDerm Camp Discovery Diversity ... MACRA implementation Alternative payment models Fee schedule State policy State policy and action Pending state legislation State ...

  6. Functional data analysis on ground reaction force of military load carriage increment

    Science.gov (United States)

    Din, Wan Rozita Wan; Rambely, Azmin Sham

    2014-06-01

    Analysis of ground reaction force on military load carriage is done through functional data analysis (FDA) statistical technique. The main objective of the research is to investigate the effect of 10% load increment and to find the maximum suitable load for the Malaysian military. Ten military soldiers age 31 ± 6.2 years, weigh 71.6 ± 10.4 kg and height of 166.3 ± 5.9 cm carrying different military load range from 0% body weight (BW) up to 40% BW participated in an experiment to gather the GRF and kinematic data using Vicon Motion Analysis System, Kirstler force plates and thirty nine body markers. The analysis is conducted in sagittal, medial lateral and anterior posterior planes. The results show that 10% BW load increment has an effect when heel strike and toe-off for all the three planes analyzed with P-value less than 0.001 at 0.05 significant levels. FDA proves to be one of the best statistical techniques in analyzing the functional data. It has the ability to handle filtering, smoothing and curve aligning according to curve features and points of interest.

  7. Factors Associated with Tick Bite Preventive Practices among Farmworkers in Malaysia

    Science.gov (United States)

    Wong, Li Ping; Tay, Sun Tee; Bulgiba, Awang; Zandi, Keivan; Kho, Kai Ling; Koh, Fui Xian; Ong, Bee Lee; Jaafar, Tariq; Hassan Nizam, Quaza Nizamuddin

    2016-01-01

    Background Farmworkers are at high-risk for tick bites, which potentially transmit various tick-borne diseases. Previous studies show that personal prevention against tick bites is key, and certain factors namely, knowledge, experience of tick bites, and health beliefs influence compliance with tick bites preventive behaviour. This study aimed to assess these factors and their associations with tick bite preventive practices among Malaysian farmworkers. Methods A total of eight cattle, goat and sheep farms in six states in Peninsular Malaysia participated in a cross-sectional survey between August and October 2013 Results A total of 151 (72.2%) out of 209 farmworkers answered the questionnaire. More than half of the farmworkers (n = 91) reported an experience of tick bites. Farms with monthly acaricide treatment had significantly (P<0.05) a low report of tick bites. Tick bite exposure rates did not differ significantly among field workers and administrative workers. The mean total knowledge score of ticks for the overall farmworkers was 13.6 (SD±3.2) from 20. The mean total tick bite preventive practices score for all farmworkers was 8.3 (SD±3.1) from 15. Fixed effect model showed the effects of four factors on tick bite prevention: (1) farms, (2) job categories (administrative workers vs. field workers), (3) perceived severity of tick bites, and (4) perceived barriers to tick bite prevention. Conclusions A high proportion of farmworkers, including administrative workers, reported an experience of tick bites. The effectiveness of monthly acaricide treatment was declared by low reports of tick bites on these farms. Tick bite preventive practices were insufficient, particularly in certain farms and for administrative workers. Our findings emphasise the need to have education programmes for all farmworkers and targeting farms with low prevention practices. Education and health programmes should increase the perception of the risk of tick bites and remove perceived

  8. Force Analysis and Energy Operation of Chaotic System of Permanent-Magnet Synchronous Motor

    Science.gov (United States)

    Qi, Guoyuan; Hu, Jianbing

    2017-12-01

    The disadvantage of a nondimensionalized model of a permanent-magnet synchronous Motor (PMSM) is identified. The original PMSM model is transformed into a Kolmogorov system to aid dynamic force analysis. The vector field of the PMSM is analogous to the force field including four types of torque — inertial, internal, dissipative, and generalized external. Using the feedback thought, the error torque between external torque and dissipative torque is identified. The pitchfork bifurcation of the PMSM is performed. Four forms of energy are identified for the system — kinetic, potential, dissipative, and supplied. The physical interpretations of the decomposition of force and energy exchange are given. Casimir energy is stored energy, and its rate of change is the error power between the dissipative energy and the energy supplied to the motor. Error torque and error power influence the different types of dynamic modes. The Hamiltonian energy and Casimir energy are compared to find the function of each in producing the dynamic modes. A supremum bound for the chaotic attractor is proposed using the error power and Lagrange multiplier.

  9. Determining Time Variation of Cable Tension Forces in Suspended Bridges Using Time-Frequency Analysis

    Directory of Open Access Journals (Sweden)

    Gannon Stromquist-LeVoir

    2018-01-01

    Full Text Available A feasibility study was conducted to develop a novel method to determine the temporal changes of tensile forces in bridge suspender cables using time-frequency analysis of ambient vibration measurements. An analytical model of the suspender cables was developed to evaluate the power spectral density (PSD function of a cable with consideration of cable flexural stiffness. Discrete-time, short-time Fourier transform (STFT was utilized to analyze the recorded acceleration histories in both time and frequency domains. A mathematical convolution of the analytical PSD function and time-frequency data was completed to evaluate changes in cable tension force over time. The method was implemented using acceleration measurements collected from an in-service steel arch bridge with a suspended deck to calculate the temporal variation in cable forces from the vibration measurements. The observations served as proof of concept that the proposed method may be used for cable fatigue life calculations and bridge weigh-in-motion studies.

  10. Bite force and sleep quality in patients with bruxism before and after using a mandibular advancement device = Força de mordida e qualidade do sono em pacientes bruxômanos antes e após o uso de placa de avanço mandibular

    Directory of Open Access Journals (Sweden)

    Mainieri, Vivian Chiada

    2008-01-01

    Full Text Available Objetivo: Comparar a força de mordida e a qualidade do sono em pacientes com bruxismo antes e depois do uso de uma placa de avanço mandibular resiliente. Metodologia: Dezoito pacientes com bruxismo em atendimento na Clínica de Oclusão da Faculdade de Odontologia da PUCRS foram selecionados de acordo com os critérios de eligibilidade do estudo, examinados segundo o protocolo RDC/DTM e tratados com uma placa de avanço mandibular resiliente. Antes e após 30 dias de uso da placa de avanço mandibular os sujeitos foram submetidos a testes de força máxima de mordida com um transdutor de força compressiva de arco cruzado posicionado na região de primeiro molar; de qualidade do sono, de acordo com o questionário QAS da Universidade de Toronto; e de contagem do número de contrações do músculo masseter durante o sono usando-se o adesivo BiteStrip®. Os dados foram analisados por teste t de Student, teste de Wilcoxon e teste de McNemar ao nível de significância de 0,05. Resultados: Houve diminuição significativa (P < 0,05 dos parâmetros de bruxismo, de força de mordida e do escore total do QAS após o uso da placa de avanço mandibular por 30 dias. Conclusão: Os resultados sugerem que o uso da placa de avanço mandibular resiliente por um mês reduziu a força de mordida e o bruxismo e melhorou a qualidade do sono nesta amostra

  11. Kawasaki Disease with Retropharyngeal Edema following a Blackfly Bite

    Directory of Open Access Journals (Sweden)

    Toru Watanabe

    2014-01-01

    Full Text Available We describe a patient with Kawasaki disease (KD and retropharyngeal edema following a blackfly bite. An 8-year-old boy was referred to our hospital because of a 3-day-history of fever and left neck swelling and redness after a blackfly bite. Computed tomography of the neck revealed left cervical lymph nodes swelling with edema, increased density of the adjacent subcutaneous tissue layer, and low density of the retropharyngeum. The patient was initially presumed to have cervical cellulitis, lymphadenitis, and retropharyngeal abscess. He was administered antibiotics intravenously, which did not improve his condition. The patient subsequently exhibited other signs of KD and was diagnosed with KD and retropharyngeal edema. Intravenous immunoglobulin therapy and oral flurbiprofen completely resolved the symptoms and signs. A blackfly bite sometimes incites a systemic reaction in humans due to a hypersensitive reaction to salivary secretions, which may have contributed to the development of KD in our patient.

  12. Hypersensitivity to mosquito bite manifested as Skeeter syndrome

    Directory of Open Access Journals (Sweden)

    Rafael Pérez-Vanzzini

    2015-02-01

    Full Text Available The reactions to mosquito bites are immunological reactions with involvement of IgE, IgG and T cells mediated hypersensitivity. These reactions are common and range from small local reactions, large local reactions to systemic allergic reactions. Skeeter syndrome is defined as a large local induced inflammatory reaction to mosquito bite and sometimes accompanied by systemic symptoms such as fever and vomiting. Diagnosis is based on clinical history and physical examination, supported by the identification of specific IgE by skin testing. Treatment includes prevention, antihistamines and steroids in some cases. Specific immunotherapy still requires further study. This paper reports two cases of patients with hypersensitivity reactions to mosquito bites, which were evaluated in our center presenting positive skin tests.

  13. Animal bite injuries to the face : A Case Report.

    Science.gov (United States)

    Simao, Niverso Rodrigues; Borba, Alexandre Meireles; da Silva, Andre Luis Fernandes; Vieira, Evanice Menezes Marcal; Carvalhosa, Artur Aburad; Bandeca, Matheus Coelho; Borges, Alvaro Henrique

    2013-08-01

    Traumatic lacerations to the skin are problems frequently seen and treated by emergency centers around the world. Among all wounds, dog and cat bites are commonly seen. As in many mammals, different species of microorganisms are found in dog and cat mouths with a potential pathological effect to humans, as represented by rabies. The injuries have disfiguration effect with possible psychological repercussion to the patient. This article aimed presenting up to date considerations regarding the management of animal bite injuries to the face, exemplified by a case report that should be the interest of all professions that deal with facial tissues, as dentists do. How to cite this article: Simao NR, Borba AM, da Silva ALF, Vieira EMM, Carvalhosa AA, Bandeca MC, Borges AH. Animal bite injuries to the face: A Case Report. J Int Oral Health 2013; 5(4):68-72.

  14. Nonlinear dynamic analysis of atomic force microscopy under deterministic and random excitation

    International Nuclear Information System (INIS)

    Pishkenari, Hossein Nejat; Behzad, Mehdi; Meghdari, Ali

    2008-01-01

    The atomic force microscope (AFM) system has evolved into a useful tool for direct measurements of intermolecular forces with atomic-resolution characterization that can be employed in a broad spectrum of applications. This paper is devoted to the analysis of nonlinear behavior of amplitude modulation (AM) and frequency modulation (FM) modes of atomic force microscopy. For this, the microcantilever (which forms the basis for the operation of AFM) is modeled as a single mode approximation and the interaction between the sample and cantilever is derived from a van der Waals potential. Using perturbation methods such as averaging, and Fourier transform nonlinear equations of motion are analytically solved and the advantageous results are extracted from this nonlinear analysis. The results of the proposed techniques for AM-AFM, clearly depict the existence of two stable and one unstable (saddle) solutions for some of exciting parameters under deterministic vibration. The basin of attraction of two stable solutions is different and dependent on the exciting frequency. From this analysis the range of the frequency which will result in a unique periodic response can be obtained and used in practical experiments. Furthermore the analytical responses determined by perturbation techniques can be used to detect the parameter region where the chaotic motion is avoided. On the other hand for FM-AFM, the relation between frequency shift and the system parameters can be extracted and used for investigation of the system nonlinear behavior. The nonlinear behavior of the oscillating tip can easily explain the observed shift of frequency as a function of tip sample distance. Also in this paper we have investigated the AM-AFM system response under a random excitation. Using two different methods we have obtained the statistical properties of the tip motion. The results show that we can use the mean square value of tip motion to image the sample when the excitation signal is random

  15. Nonlinear dynamic analysis of atomic force microscopy under deterministic and random excitation

    Energy Technology Data Exchange (ETDEWEB)

    Pishkenari, Hossein Nejat [Center of Excellence in Design, Robotics and Automation (CEDRA), School of Mechanical Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Behzad, Mehdi [Center of Excellence in Design, Robotics and Automation (CEDRA), School of Mechanical Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)], E-mail: m_behzad@sharif.edu; Meghdari, Ali [Center of Excellence in Design, Robotics and Automation (CEDRA), School of Mechanical Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)

    2008-08-15

    The atomic force microscope (AFM) system has evolved into a useful tool for direct measurements of intermolecular forces with atomic-resolution characterization that can be employed in a broad spectrum of applications. This paper is devoted to the analysis of nonlinear behavior of amplitude modulation (AM) and frequency modulation (FM) modes of atomic force microscopy. For this, the microcantilever (which forms the basis for the operation of AFM) is modeled as a single mode approximation and the interaction between the sample and cantilever is derived from a van der Waals potential. Using perturbation methods such as averaging, and Fourier transform nonlinear equations of motion are analytically solved and the advantageous results are extracted from this nonlinear analysis. The results of the proposed techniques for AM-AFM, clearly depict the existence of two stable and one unstable (saddle) solutions for some of exciting parameters under deterministic vibration. The basin of attraction of two stable solutions is different and dependent on the exciting frequency. From this analysis the range of the frequency which will result in a unique periodic response can be obtained and used in practical experiments. Furthermore the analytical responses determined by perturbation techniques can be used to detect the parameter region where the chaotic motion is avoided. On the other hand for FM-AFM, the relation between frequency shift and the system parameters can be extracted and used for investigation of the system nonlinear behavior. The nonlinear behavior of the oscillating tip can easily explain the observed shift of frequency as a function of tip sample distance. Also in this paper we have investigated the AM-AFM system response under a random excitation. Using two different methods we have obtained the statistical properties of the tip motion. The results show that we can use the mean square value of tip motion to image the sample when the excitation signal is random.

  16. k-OptForce: integrating kinetics with flux balance analysis for strain design.

    Directory of Open Access Journals (Sweden)

    Anupam Chowdhury

    2014-02-01

    Full Text Available Computational strain design protocols aim at the system-wide identification of intervention strategies for the enhanced production of biochemicals in microorganisms. Existing approaches relying solely on stoichiometry and rudimentary constraint-based regulation overlook the effects of metabolite concentrations and substrate-level enzyme regulation while identifying metabolic interventions. In this paper, we introduce k-OptForce, which integrates the available kinetic descriptions of metabolic steps with stoichiometric models to sharpen the prediction of intervention strategies for improving the bio-production of a chemical of interest. It enables identification of a minimal set of interventions comprised of both enzymatic parameter changes (for reactions with available kinetics and reaction flux changes (for reactions with only stoichiometric information. Application of k-OptForce to the overproduction of L-serine in E. coli and triacetic acid lactone (TAL in S. cerevisiae revealed that the identified interventions tend to cause less dramatic rearrangements of the flux distribution so as not to violate concentration bounds. In some cases the incorporation of kinetic information leads to the need for additional interventions as kinetic expressions render stoichiometry-only derived interventions infeasible by violating concentration bounds, whereas in other cases the kinetic expressions impart flux changes that favor the overproduction of the target product thereby requiring fewer direct interventions. A sensitivity analysis on metabolite concentrations shows that the required number of interventions can be significantly affected by changing the imposed bounds on metabolite concentrations. Furthermore, k-OptForce was capable of finding non-intuitive interventions aiming at alleviating the substrate-level inhibition of key enzymes in order to enhance the flux towards the product of interest, which cannot be captured by stoichiometry-alone analysis

  17. Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals

    Directory of Open Access Journals (Sweden)

    Syafiq Hazwan

    2016-01-01

    Full Text Available Cooling systems is a key point for hot forming process of Ultra High Strength Steels (UHSS. Normally, cooling systems is made using deep drilling technique. Although deep twist drill is better than other drilling techniques in term of higher productivity however its main problem is premature tool breakage, which affects the production quality. In this paper, analysis of deep twist drill process parameters such as cutting speed, feed rate and depth of cut by using statistical analysis to identify the tool condition is presented. The comparisons between different two tool geometries are also studied. Measured data from vibrations and force sensors are being analyzed through several statistical parameters such as root mean square (RMS, mean, kurtosis, standard deviation and skewness. Result found that kurtosis and skewness value are the most appropriate parameters to represent the deep twist drill tool conditions behaviors from vibrations and forces data. The condition of the deep twist drill process been classified according to good, blunt and fracture. It also found that the different tool geometry parameters affect the performance of the tool drill. It believe the results of this study are useful in determining the suitable analysis method to be used for developing online tool condition monitoring system to identify the tertiary tool life stage and helps to avoid mature of tool fracture during drilling process.

  18. Risk analysis tools for force protection and infrastructure/asset protection

    International Nuclear Information System (INIS)

    Jaeger, C.D.; Duggan, R.A.; Paulus, W.K.

    1998-01-01

    The Security Systems and Technology Center at Sandia National Laboratories has for many years been involved in the development and use of vulnerability assessment and risk analysis tools. In particular, two of these tools, ASSESS and JTS, have been used extensively for Department of Energy facilities. Increasingly, Sandia has been called upon to evaluate critical assets and infrastructures, support DoD force protection activities and assist in the protection of facilities from terrorist attacks using weapons of mass destruction. Sandia is involved in many different activities related to security and force protection and is expanding its capabilities by developing new risk analysis tools to support a variety of users. One tool, in the very early stages of development, is EnSURE, Engineered Surety Using the Risk Equation. EnSURE addresses all of the risk equation and integrates the many components into a single, tool-supported process to help determine the most cost-effective ways to reduce risk. This paper will briefly discuss some of these risk analysis tools within the EnSURE framework

  19. Analysis of the resistive force in fluid flow through porous media

    International Nuclear Information System (INIS)

    Thirriot, C.; Cohen, A.M.S.; Massarani, G.; Cohen, B.M.S.

    1976-01-01

    The resistive term appearing in the equation of motion for a fluid flowing through a porous medium is analyzed. This term represents the interactive force between the fluid and the solid mesh. The analysis was done starting with a simple constitutive equation with the help of large number of experimental data points, both with consolidated and non-consolidated porous media. It was found that in almost all cases the resistive term can be adequately expressed in the vetorial from of Forchheimer's quadratic equation [pt

  20. Staging Options for the Air Force’s Electronic Combat Test Capability: a Cost Analysis

    Science.gov (United States)

    1990-09-01

    strategic in nature and completely different than daily operating decisions (20:6). Horngren , in his book Cost Accounting : A Managerial Emphasis...AFIT/GCA/LSY/90S-3 DTTC S E-191 J) C, STAGING OPTIONS FOR THE AIR FORCE’S ELECTRONIC COMBAT TEST CAPABILITY: A COST ANALYSIS THESIS Joseph J. Landino...Alternative Costs ......... 56 v AFIT/GCA/LSY/90S-3 Abstract This study’s purpose was to identify the lowest cost aircraft staging base( s ) for the Air

  1. Double polarized neutron-proton scattering and nucleon-nucleon tensor force: An alternative analysis

    International Nuclear Information System (INIS)

    Tornow, W.; Gould, C.R.; Haase, D.G.; Walston, J.R.; Raichle, B.W.

    2002-01-01

    Previous neutron-proton total cross-section difference measurements Δσ L and Δσ T between E n =7.43 and 17.1 MeV have been analyzed in a new way that reduces experimental systematic uncertainties. The results obtained for the 3 S 1 - 3 D 1 mixing parameter ε 1 are very similar to the published values, substantiating the previous conclusion that the nucleon-nucleon tensor force at low energies is stronger than predicted by the Nijmegen partial-wave analysis and, therefore, by all the recent high-precision nucleon-nucleon potential models as well

  2. Nonlinear dynamic analysis of piping systems using the pseudo force method

    International Nuclear Information System (INIS)

    Prachuktam, S.; Bezler, P.; Hartzman, M.

    1979-01-01

    Simple piping systems are composed of linear elastic elements and can be analyzed using conventional linear methods. The introduction of constraint springs separated from the pipe with clearance gaps to such systems to cope with the pipe whip or other extreme excitation conditions introduces nonlinearities to the system, the nonlinearities being associated with the gaps. Since these spring-damper constraints are usually limited in number, descretely located, and produce only weak nonlinearities, the analysis of linear systems including these nonlinearities can be carried out by using modified linear methods. In particular, the application of pseudo force methods wherein the nonlinearities are treated as displacement dependent forcing functions acting on the linear system were investigated. The nonlinearities induced by the constraints are taken into account as generalized pseudo forces on the right-hand side of the governing dynamic equilibrium equations. Then an existing linear elastic finite element piping code, EPIPE, was modified to permit application of the procedure. This option was inserted such that the analyses could be performed using either the direct integration method or via a modal superposition method, the Newmark-Beta integration procedure being employed in both methods. The modified code was proof tested against several problems taken from the literature or developed with the nonlinear dynamics code OSCIL. The problems included a simple pipe loop, cantilever beam, and lumped mass system subjected to pulsed and periodic forcing functions. The problems were selected to gage the overall accuracy of the method and to insure that it properly predicted the jump phenomena associated with nonlinear systems. (orig.)

  3. Medicinal plants used to treat Snake bite by Fulani Herdsmen in ...

    African Journals Online (AJOL)

    Dr. Ameen

    the use of village surrounding medicinal plants for the treatment of the snake bite. Recent efforts on ... treatment of snake bites. Information .... Snake venoms are complex mixture of enzymatic and .... treated, mode of diagnosis and medicinal.

  4. Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Turbine Bladed Disks

    Science.gov (United States)

    Brown, Andrew M.; Schmauch, Preston

    2012-01-01

    Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. The standard technique for forced response analysis to assess structural integrity is to decompose a CFD generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non-harmonic excitation sources that become present in complex flows. These complications suggest the question of whether frequency domain analysis is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, have been performed. The first is of a bladed disk with each blade modeled by simple beam elements. It was hypothesized that the randomness and other variation from the standard harmonic excitation would reduce the blade structural response, but the results showed little reduction. The second study was of a realistic model of a bladed-disk excited by the same CFD used in the J2X engine program. The results showed that the transient analysis results were up to 10% higher for "clean" nodal diameter excitations and six times larger for "messy" excitations, where substantial Fourier content around the main harmonic exists.

  5. Mass awareness regarding snake bite induced early morning neuroparalysis can prevent many deaths in North India

    OpenAIRE

    Sharma, Rupinder; Dogra, Varundeep; Sharma, Gurudutt; Chauhan, Vivek

    2016-01-01

    Introduction: In North India snake bite deaths are predominantly seen with neurotoxic envenomations (NEs) whereas in South India the hemotoxic envenomation (HE) is more common. Krait is responsible for most deaths in North India. It bites people sleeping on the floors, mostly at night. We describe the profile of venomous snake bites over 1 year in 2013. Materials and Methods: The study was conducted in a rural tertiary care hospital in North India. Demographics, circumstances of bite, envenom...

  6. Streptococcus oralis cerebral abscess following monkey bite in a 2-month-old infant.

    Science.gov (United States)

    Thiagarajan, Srinivasan; Krishnamurthy, Sriram; Raghavan, Renitha; Mahadevan, Subramanian; Madhugiri, Venkatesh S; Sistla, Sujatha

    2016-05-01

    Although cerebral abscesses caused by animal bites have been reported, they are extremely rare in infants and have not been described following monkey bite. A 55-day-old male infant presented with a multi-loculated Streptococcus oralis cerebral abscess following a monkey bite on the scalp. There was a clinical response to antibiotic therapy and repeated surgical aspiration followed by a ventriculoperitoneal shunt. This is the first report of a patient with a brain abscess following a monkey bite.

  7. Canine Supply for Physical Security: An Analysis of the Royal Australian Air Force Military Working Dog Program

    Science.gov (United States)

    2016-03-01

    PHYSICAL SECURITY: AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM by Mark W. Powell March 2016 Thesis...AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Mark W. Powell 7. PERFORMING...increased demand on its physical security elements. Its military working dog (MWD) workforce is required to meet an inventory of 204 by end of year 2023 as

  8. Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Supersonic Turbine Bladed Disks

    Science.gov (United States)

    Brown, Andrew M.; Schmauch, Preston

    2011-01-01

    Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. Assessing the blade structural integrity is a complex task requiring an initial characterization of whether resonance is possible and then performing a forced response analysis if that condition is met. The standard technique for forced response analysis in rocket engines is to decompose a CFD-generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non-harmonic excitation sources that become present in complex flows. A substantial effort has been made to account for this denser spatial Fourier content in frequency response analysis (described in another paper by the author), but the question still remains whether the frequency response analysis itself is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, of bladed-disks undergoing this complex flow environment have been performed. The first is of a bladed disk with each blade modeled by simple beam elements. Six loading cases were generated by varying a baseline harmonic excitation in different ways based upon cold-flow testing from Heritage Fuel Air Turbine Test. It was hypothesized that the randomness and other variation from the standard harmonic excitation would reduce the blade structural response, but the results showed little reduction. The second study was of a realistic model of a bladed-disk excited by the same CFD used in the J2X engine program. It was hypothesized that enforcing periodicity in the CFD (inherent in the frequency response technique) would overestimate the

  9. Single molecule force spectroscopy at high data acquisition: A Bayesian nonparametric analysis

    Science.gov (United States)

    Sgouralis, Ioannis; Whitmore, Miles; Lapidus, Lisa; Comstock, Matthew J.; Pressé, Steve

    2018-03-01

    Bayesian nonparametrics (BNPs) are poised to have a deep impact in the analysis of single molecule data as they provide posterior probabilities over entire models consistent with the supplied data, not just model parameters of one preferred model. Thus they provide an elegant and rigorous solution to the difficult problem encountered when selecting an appropriate candidate model. Nevertheless, BNPs' flexibility to learn models and their associated parameters from experimental data is a double-edged sword. Most importantly, BNPs are prone to increasing the complexity of the estimated models due to artifactual features present in time traces. Thus, because of experimental challenges unique to single molecule methods, naive application of available BNP tools is not possible. Here we consider traces with time correlations and, as a specific example, we deal with force spectroscopy traces collected at high acquisition rates. While high acquisition rates are required in order to capture dwells in short-lived molecular states, in this setup, a slow response of the optical trap instrumentation (i.e., trapped beads, ambient fluid, and tethering handles) distorts the molecular signals introducing time correlations into the data that may be misinterpreted as true states by naive BNPs. Our adaptation of BNP tools explicitly takes into consideration these response dynamics, in addition to drift and noise, and makes unsupervised time series analysis of correlated single molecule force spectroscopy measurements possible, even at acquisition rates similar to or below the trap's response times.

  10. Model tests and numerical analysis on restoring force characteristics of reactor buildings

    International Nuclear Information System (INIS)

    Uchiyama, Y.; Suzuki, S.; Akino, K.

    1987-01-01

    Seismic shear walls of nuclear reactor buildings are composed of cylindrical, truncated cone-shape, box-shape, irregular polygonal walls or its combination and they are generally heavily reinforced concrete (RC) walls. So the elasto-plastic behaviors of those RC structures in ultimate regions have many unsolved and may be considered as especially important factors for explaining nonlinear response of nuclear reactor buildings. Following these research demands, the authors have prepared a nonlinear F.E.M. code called ''SANREF'' and made an extensive study for the restoring force characteristics of the inner concrete structures (I/C) of a PWR-type containment vessel and the principal seismic shear walls of a BWR-type reactor building by some series of reduced model tests and simulation analysis for the tests results. The detailed objectives of this study can be summarized as follows: (1) Examine the effectiveness of the configurations of shear walls, reinforcement ratios, shear span ratios (M/Qd) and vertical axial stress by ''partial model test'' which simulates some independent shear walls of the PWR-type and BWR-type reactor buildings. (2) Obtain fundamental data of restoring force characteristics of the complex shaped RC structures by ''composite model test'' which models are composed of the partial model test specimens. (3) Verify the applicability of analytical methods and constitutive modelings in SANREF code for complex shaped RC structures through nonlinear simulation analysis for the composite model test

  11. Multifrequency spectrum analysis using fully digital G Mode-Kelvin probe force microscopy

    International Nuclear Information System (INIS)

    Collins, Liam; Belianinov, Alex; Somnath, Suhas; Balke, Nina; Kalinin, Sergei V; Jesse, Stephen; Rodriguez, Brian J

    2016-01-01

    Since its inception over two decades ago, Kelvin probe force microscopy (KPFM) has become the standard technique for characterizing electrostatic, electrochemical and electronic properties at the nanoscale. In this work, we present a purely digital, software-based approach to KPFM utilizing big data acquisition and analysis methods. General mode (G-Mode) KPFM works by capturing the entire photodetector data stream, typically at the sampling rate limit, followed by subsequent de-noising, analysis and compression of the cantilever response. We demonstrate that the G-Mode approach allows simultaneous multi-harmonic detection, combined with on-the-fly transfer function correction—required for quantitative CPD mapping. The KPFM approach outlined in this work significantly simplifies the technique by avoiding cumbersome instrumentation optimization steps (i.e. lock in parameters, feedback gains etc), while also retaining the flexibility to be implemented on any atomic force microscopy platform. We demonstrate the added advantages of G-Mode KPFM by allowing simultaneous mapping of CPD and capacitance gradient (C′) channels as well as increased flexibility in data exploration across frequency, time, space, and noise domains. G-Mode KPFM is particularly suitable for characterizing voltage sensitive materials or for operation in conductive electrolytes, and will be useful for probing electrodynamics in photovoltaics, liquids and ionic conductors. (paper)

  12. Experimental and theoretical analysis of a hybrid solar thermoelectric generator with forced convection cooling

    Science.gov (United States)

    Sundarraj, Pradeepkumar; Taylor, Robert A.; Banerjee, Debosmita; Maity, Dipak; Sinha Roy, Susanta

    2017-01-01

    Hybrid solar thermoelectric generators (HSTEGs) have garnered significant research attention recently due to their potential ability to cogenerate heat and electricity. In this paper, theoretical and experimental investigations of the electrical and thermal performance of a HSTEG system are reported. In order to validate the theoretical model, a laboratory scale HSTEG system (based on forced convection cooling) is developed. The HSTEG consists of six thermoelectric generator modules, an electrical heater, and a stainless steel cooling block. Our experimental analysis shows that the HSTEG is capable of producing a maximum electrical power output of 4.7 W, an electrical efficiency of 1.2% and thermal efficiency of 61% for an average temperature difference of 92 °C across the TEG modules with a heater power input of 382 W. These experimental results of the HSTEG system are found to be in good agreement with the theoretical prediction. This experimental/theoretical analysis can also serve as a guide for evaluating the performance of the HSTEG system with forced convection cooling.

  13. The analysis of labor force participation in rubber smallholding sector in Banyuasin Regency, South Sumatera, Indonesia

    Directory of Open Access Journals (Sweden)

    M. Yusuf

    2015-06-01

    Full Text Available The fact is that natural rubber has a strategic role as it is one of the commodities industry tropical crops. In addition, it also has important and strategic role in sup-porting the national economy, primarily as a source of livelihood of millions of rub-ber farmers in rural areas. This study analyzed the potential of using family labor in rubber smallholding sector in Banyuasin Regency, South Sumatra Province, Indo-nesia. The total sample used for the study was 280 respondents of households. Data was analyzed using multiple regression analyses. The multiple regression analysis used to identify the determinants of labor force participation decision regarding work in the rubber smallholding in the study area such as rubber production (kg per year per hectare, number of family workers, age of family head, location of dwelling, education of family head, and average years of schooling of family workers. Based on the analysis, only two factors affected significantly family labor force participation outside their smallholdings, namely number of family labor and education of family head.

  14. Make It Count: an Analysis of a Brute-forcing Botnet

    Directory of Open Access Journals (Sweden)

    Veronica Valeros

    2016-02-01

    Full Text Available The smallest element in a botnet is a bot. The behavior of a bot can change dynamically based on the decision of the botmaster. Commonly driven by profit, bots are expected to be profitable. If an infected bot does not fulfill the expectations, the botmaster can instruct the bot to switch it's behavior to serve a better purpose. This paper presents a detailed analysis of a network traffic capture of a machine originally infected by a Gamarue variant. The analysis will uncover the behavior of the bot since the initial infection, inactivity period, delivery of a new payload and the following switch of behavior of the bot. The paper will analyze the infection in detail, including the horizontal brute-forcing activity affecting thousands of WordPress websites. The goal of the paper is to show a concrete example of a bot performing brute-forcing, analyze it, identify the mechanisms used and indicators of compromise that will help detect it.

  15. The management of dog bite injuries of genitalia in paediatric age ...

    African Journals Online (AJOL)

    Dog bite injuries are common in children and represent an important health-care problem. Most dog bite injuries involve the face or an extremity. Victims tend to seek medical care quickly. Dog bites to the external genitalia are rarely reported, but they potentially result in morbidity if improperly managed. Morbidity is also ...

  16. Age-related changes in the propensity of dogs to bite.

    Science.gov (United States)

    Messam, L L McV; Kass, P H; Chomel, B B; Hart, L A

    2013-08-01

    This retrospective cohort study was aimed at describing the effects of age at acquisition, age, and duration of ownership of dogs on the risk of (1) bites during play and (2) non-play bites to humans. Data were collected on 110 dogs that had bitten during play with a person, 161 dogs that had bitten outside of play and 951 non-biting dogs from veterinary clients in Kingston (KGN), Jamaica and San Francisco (SF), USA. Modified Poisson regression was employed to model the relationships of both types of bites to each variable separately. Effects of the variables on dog bite risk (1) during and (2) outside of play with the dog, differed from each other and by type of bite. Effects varied with the dog's age and age-related associations were strongest in dogs younger than 1 year old. Ages at acquisition of dogs at highest risk for bites during play were substantially lower than those at risk for non-play bites. Ages and durations of ownership of dogs at highest risk for bites during play were also lower than those of dogs at highest risk for non-play bites. The propensity of a dog to bite changes as it ages and relationships between dog bites occurring during and outside of play and the dog's age at acquisition, current age, and duration of ownership, differ from each other. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. A retrospective review of snake bite victims admitted in a tertiary ...

    African Journals Online (AJOL)

    Objective: Snake bite remains major public health problem worldwide. We present our experience with cases of snake bites managed in our tertiary care teaching center of South India. Materials and Methods: The details of all patients with snake bite admitted to a tertiary teaching care hospital from 2010 to 2012 were ...

  18. Dynamic Torque and Vertical Force Analysis during Nickel-titanium Rotary Root Canal Preparation with Different Modes of Reciprocal Rotation.

    Science.gov (United States)

    Tokita, Daisuke; Ebihara, Arata; Nishijo, Miki; Miyara, Kana; Okiji, Takashi

    2017-10-01

    The purpose of the present study was to compare 2 modes of reciprocal movement (torque-sensitive and time-dependent reciprocal rotation) with continuous rotation in terms of torque and apical force generation during nickel-titanium rotary root canal instrumentation. A custom-made automated root canal instrumentation and torque/force analyzing device was used to prepare simulated canals in resin blocks and monitor the torque and apical force generated in the blocks during preparation. Experimental groups (n = 7, each) consisted of (1) torque-sensitive reciprocal rotation with torque-sensitive vertical movement (group TqR), (2) time-dependent reciprocal rotation with time-dependent vertical movement (group TmR), and (3) continuous rotation with time-dependent vertical movement (group CR). The canals were instrumented with TF Adaptive SM1 and SM2 rotary files (SybronEndo, Orange, CA), and the torque and apical force were measured during instrumentation with SM2. The mean and maximum torque and apical force values were statistically analyzed using 1-way analysis of variance and the Tukey test (α = 0.05). The recordings showed intermittent increases of upward apical force and clockwise torque, indicating the generation and release of screw-in forces. The maximum upward apical force values in group TmR were significantly smaller than those in group CR (P forces when compared with continuous rotation. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  19. Stochastic modeling of friction force and vibration analysis of a mechanical system using the model

    International Nuclear Information System (INIS)

    Kang, Won Seok; Choi, Chan Kyu; Yoo, Hong Hee

    2015-01-01

    The squeal noise generated from a disk brake or chatter occurred in a machine tool primarily results from friction-induced vibration. Since friction-induced vibration is usually accompanied by abrasion and lifespan reduction of mechanical parts, it is necessary to develop a reliable analysis model by which friction-induced vibration phenomena can be accurately analyzed. The original Coulomb's friction model or the modified Coulomb friction model employed in most commercial programs employs deterministic friction coefficients. However, observing friction phenomena between two contact surfaces, one may observe that friction coefficients keep changing due to the unevenness of contact surface, temperature, lubrication and humidity. Therefore, in this study, friction coefficients are modeled as random parameters that keep changing during the motion of a mechanical system undergoing friction force. The integrity of the proposed stochastic friction model was validated by comparing the analysis results obtained by the proposed model with experimental results.

  20. The Use of Atomic Force Microscopy for 3D Analysis of Nucleic Acid Hybridization on Microarrays.

    Science.gov (United States)

    Dubrovin, E V; Presnova, G V; Rubtsova, M Yu; Egorov, A M; Grigorenko, V G; Yaminsky, I V

    2015-01-01

    Oligonucleotide microarrays are considered today to be one of the most efficient methods of gene diagnostics. The capability of atomic force microscopy (AFM) to characterize the three-dimensional morphology of single molecules on a surface allows one to use it as an effective tool for the 3D analysis of a microarray for the detection of nucleic acids. The high resolution of AFM offers ways to decrease the detection threshold of target DNA and increase the signal-to-noise ratio. In this work, we suggest an approach to the evaluation of the results of hybridization of gold nanoparticle-labeled nucleic acids on silicon microarrays based on an AFM analysis of the surface both in air and in liquid which takes into account of their three-dimensional structure. We suggest a quantitative measure of the hybridization results which is based on the fraction of the surface area occupied by the nanoparticles.

  1. Cryogenic analysis of forced-cooled, superconducting TF magnets for compact tokamak reactors

    International Nuclear Information System (INIS)

    Kerns, J.A.; Slack, D.S.; Miller, J.R.

    1988-01-01

    Current designs for compact tokamak reactors require the toroidal- field (TF) superconducting magnets to produce fields from 10 to 15 T at the winding pack, using high-current densities to high nuclear heat loads (greater than 1 kW/coil in some instances), which are significantly greater than the conduction and radiation heat loads for which cryogenic systems are usually designed. A cryogenic system for the TF winding pack for two such tokamak designs has been verified by performing a detailed, steady-state heat-removal analysis. Helium properties along the forced-cooled conductor flow path for a range of nuclear heat loads have been calculated. The results and implications of this analysis are presented. 12 refs., 6 figs

  2. A placebo controlled clinical trial investigating the efficacy of a homeopathic after-bite gel in reducing mosquito bite induced erythema.

    Science.gov (United States)

    Hill, N; Stam, C; Tuinder, S; van Haselen, R A

    1995-01-01

    A randomised, placebo controlled clinical trial was conducted to examine the efficacy of a homeopathic after-bite gel in the symptomatic relief of mosquito bites. Sixty eight healthy volunteers were bitten under laboratory conditions by Aedes aegypti mosquitoes at three spots, on the ventral aspect of the forearm. One bite was treated with the homeopathic after-bite gel, another bite with a placebo gel which was identical in appearance and smell to the homeopathic after-bite gel, and the third bite remained untreated. Immediately after the bites and 1, 3, 6, 26 and 31 hours post-bite, the length and width of the erythema were measured with a calliper, and photographs were taken of the bite sites from which the size of the erythema was subsequently determined. This was followed by assessment of the extent of itching with a verbal analogue scale, and finally treatment took place. For each spot the total erythema was calculated as the area under the plotted curve of the erythema at different time points (mm2*h) and the total sum of the itch scores was determined. For the bites treated with the homeopathic after-bite gel the median total erythema was 10.500 mm2*h. For the spots treated with the placebo gel and the untreated spots the median total erythema was 12.900 mm2*h and 13.300 mm2*h, respectively. The difference between the spots treated with the homeopathic after-bite gel and the untreated spots came close to significance (two-tailed P = 0.06), which was not the case for the difference between the spots treated with the homeopathic after-bite gel and the spots treated with placebo gel (P = 0.13). After pooling the data of a very similar previous pilot study and the present study (ntotal = 83), the homeopathic after-bite gel was significantly superior to no treatment (two-tailed P = 0.003) as well as to placebo gel (two-tailed P = 0.03). Comparing itching after the three treatments, no significant differences could be demonstrated. The extent of itching was

  3. Spectral force analysis using atomic force microscopy reveals the importance of surface heterogeneity in bacterial and colloid adhesion to engineered surfaces.

    Science.gov (United States)

    Ma, Huilian; Winslow, Charles J; Logan, Bruce E

    2008-04-01

    Coatings developed to reduce biofouling of engineered surfaces do not always perform as expected based on their native properties. One reason is that a relatively small number of highly adhesive sites, or the heterogeneity of the coated surface, may control the overall response of the system to initial bacterial deposition. It is shown here using an approach we call spectral force analysis (SFA), based on force volume imaging of the surface with atomic force microscopy, that the behavior of surfaces and coatings can be better understood relative to bacterial adhesion. The application of vapor deposited TiO(2) metal oxide increased bacterial and colloid adhesion, but coating the surface with silica oxide reduced adhesion in a manner consistent with SFA based on analysis of the "stickiest" sites. Application of a TiO(2)-based paint to a surface produced a relatively non-fouling surface. Addition of a hydrophilic layer coating to this surface should have decreased fouling. However, it was observed that this coating actually increased fouling. Using SFA it was shown that the reason for the increased adhesion of bacteria and particles to the hydrophilic layer was that the surface produced by this coating was highly heterogeneous, resulting in a small number of sites that created a stickier surface. These results show that while it is important to manufacture surfaces with coatings that are relatively non-adhesive to bacteria, it is also essential that these coatings have a highly uniform surface chemistry.

  4. A socioecological analysis of the determinants of national public health nutrition work force capacity: Australia as a case study.

    Science.gov (United States)

    Hughes, Roger

    2006-01-01

    This article uses a socioecological analytical approach to assess the capacity of the public health nutrition work force in Australia as a prelude to work force development strategy planning. It demonstrates how the socioecological model can be used to assess and inform the development of the infrastructure required for effective public health nutrition effort. An interpretive case study method was used involving triangular analysis of quantitative and qualitative data from multiple sources including semistructured interviews with advanced-level practitioners, literature review, a cross-sectional national work force survey, and position description audit and consensus development using a Delphi study. The findings of this analysis indicate that the Australian public health nutrition work force's capacity to effectively address priority nutrition issues is limited by determinants that can be categorized as relating to human resource infrastructure, organizational and policy environments, intelligence access and use, practice improvement and learning systems, and work force preparation. This socioecological analysis supports an intelligence-based focus for work force development effort in Australia and a conceptual framework for work force capacity assessment with potential applications in other countries.

  5. Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses.

    Science.gov (United States)

    Lorenz, Kathrine Osborn; Kakkassery, Joseph; Boree, Danielle; Pinto, David

    2014-09-01

    Limbal ring (also known as 'circle') contact lenses are becoming increasingly popular, especially in Asian markets because of their eye-enhancing effects. The pigment particles that give the eye-enhancing effects of these lenses can be found on the front or back surface of the contact lens or 'enclosed' within the lens matrix. The purpose of this research was to evaluate the pigment location and surface roughness of seven types of 'circle' contact lenses. Scanning electron microscopic (SEM) analysis was performed using a variable pressure Hitachi S3400N instrument to discern the placement of lens pigments. Atomic force microscopy (Dimension Icon AFM from Bruker Nano) was used to determine the surface roughness of the pigmented regions of the contact lenses. Atomic force microscopic analysis was performed in fluid phase under contact mode using a Sharp Nitride Lever probe (SNL-10) with a spring constant of 0.06 N/m. Root mean square (RMS) roughness values were analysed using a generalised linear mixed model with a log-normal distribution. Least square means and their corresponding 95% confidence intervals were estimated for each brand, location and pigment combination. SEM cross-sectional images at 500× and 2,000× magnification showed pigment on the surface of six of the seven lens types tested. The mean depth of pigment for 1-DAY ACUVUE DEFINE (1DAD) lenses was 8.1 μm below the surface of the lens, while the remaining lens types tested had pigment particles on the front or back surface. Results of the atomic force microscopic analysis indicated that 1DAD lenses had significantly lower root mean square roughness values in the pigmented area of the lens than the other lens types tested. SEM and AFM analysis revealed pigment on the surface of the lens for all types tested with the exception of 1DAD. Further research is required to determine if the difference in pigment location influences on-eye performance. © 2014 The Authors. Clinical and Experimental

  6. Bite Block Vowel Production in Apraxia of Speech

    Science.gov (United States)

    Jacks, Adam

    2008-01-01

    Purpose: This study explored vowel production and adaptation to articulatory constraints in adults with acquired apraxia of speech (AOS) plus aphasia. Method: Five adults with acquired AOS plus aphasia and 5 healthy control participants produced the vowels [iota], [epsilon], and [ash] in four word-length conditions in unconstrained and bite block…

  7. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Particularly if you’re visiting areas with known insect-borne diseases, it’s important to take steps to ... bug bites, dermatologists recommend the following tips: Use insect repellent. To protect against mosquitoes, ticks and other ...

  8. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... 0; c public SPOT Skin Cancer™ Diseases and treatments Skin, hair, and nail care Skin care Hair care / hair loss Injured skin Blisters Bug bites and stings How to remove a tick How to treat a bee sting When to see a dermatologist Burns Frostbite Splinters Treating sunburn Wound care Nail care ...

  9. Innovation in prediction planning for anterior open bite correction.

    Science.gov (United States)

    Almuzian, Mohammed; Almukhtar, Anas; O'Neil, Michael; Benington, Philip; Al Anezi, Thamer; Ayoub, Ashraf

    2015-05-01

    This study applies recent advances in 3D virtual imaging for application in the prediction planning of dentofacial deformities. Stereo-photogrammetry has been used to create virtual and physical models, which are creatively combined in planning the surgical correction of anterior open bite. The application of these novel methods is demonstrated through the surgical correction of a case.

  10. Reconstruction of massive facial avulsive injury, secondary to animal bite.

    Science.gov (United States)

    Motamed, Sadrollah; Niazi, Feizollah; Moosavizadeh, Seyed Mehdi; Gholizade Pasha, Abdolhamid; Motamed, Ali

    2014-02-01

    Management of facial soft tissue trauma requires complex reconstruction surgery. Animal bite on face is a common cause of facial tissue trauma with severe destruction. Evaluation of unit involvement is the first effort, followed by designation of reconstruction. In this case, we performed multiple reconstruction options.

  11. Extreme skeletal open bite correction with vertical elastics.

    Science.gov (United States)

    Cruz-Escalante, Marco Antonio; Aliaga-Del Castillo, Aron; Soldevilla, Luciano; Janson, Guilherme; Yatabe, Marilia; Zuazola, Ricardo Voss

    2017-11-01

    Severe skeletal open bites may be ideally treated with a combined surgical-orthodontic approach. Alternatively, compensations may be planned to camouflage the malocclusion with orthodontics alone. This case report describes the treatment of an 18-year-old man who presented with a severe open bite involving the anterior and posterior teeth up to the first molars, increased vertical dimension, bilateral Class III molar relationship, bilateral posterior crossbite, dental midline deviation, and absence of the maxillary right canine and the mandibular left first premolar. A treatment plan including the extraction of the mandibular right first premolar and based on uprighting and vertical control of the posterior teeth, combined with extrusion of the anterior teeth using multiloop edgewise archwire mechanics and elastics was chosen. After 6 months of alignment and 2 months of multiloop edgewise archwire mechanics, the open bite was significantly reduced. After 24 months of treatment, anterior teeth extrusion, posterior teeth intrusion, and counterclockwise mandibular rotation were accomplished. Satisfactory improvement of the overbite, overjet, sagittal malocclusion, and facial appearance were achieved. The mechanics used in this clinical case demonstrated good and stable results for open-bite correction at the 2-year posttreatment follow-up.

  12. Biting-density and microfilariae infection of Simulium damnosum ...

    African Journals Online (AJOL)

    Investigations on the biting-density and microfilariae infection rate of S. damnosumsl population caught around the Mada River was conducted between May 2013 to April 2014. Captured flies were morphologically identified and dissected for parity and infectivity rate. A total of 308 adult female S. damnosum sl were caught, ...

  13. Bite weight prediction from acoustic recognition of chewing

    NARCIS (Netherlands)

    Amft, O.D.; Kusserow, M.; Tröster, G.

    2009-01-01

    Automatic dietary monitoring (ADM) offers new perspectives to reduce the self-reporting burden for participants in diet coaching programs. This paper presents an approach to predict weight of individual bites taken. We utilize a pattern recognition procedure to spot chewing cycles and food type in

  14. Treatment and outcome of unusual animal bite injuries in young ...

    African Journals Online (AJOL)

    In Philadelphia and New York City, USA, the highest incidences were found .... Mouse. Other. Monkey. 64.8%. 10.1%. 8.8%. 8.2%. 3.8%. 3.1% 1.3%. Fig. 1. Mammalian bite .... development of preventive strategies that target the population at ...

  15. Black and brown widow spider bites in South Africa

    African Journals Online (AJOL)

    JUNIE 1993 ten were adults, 2 were aged 13 - 19 years and 11 were ... back 1). In contrast, 10 of the brown widow bites were on the upper part and 5 on the lower part of the body ..... patient develops generalised muscular pain and cramps,.

  16. Takotsubo cardiomyopathy in a snake bite victim: a case report ...

    African Journals Online (AJOL)

    Takotsubo cardiomyopathy occurs in patients with severe emotional or physiologic stress. The prognosis is usually favorable, and the left ventricular wall motion dyskinesis normalizes within days to weeks. In this paper we report a case of snake bite complicated by takotsubo cardiomyopathy. We advise physicians to ...

  17. Epidemiology of Snake Bites among Selected Communities in the ...

    African Journals Online (AJOL)

    Snake is one of the major group of games feared by people in many localities because of their venoms, yet snakes are equally afraid of human beings. This balance of terror apart from affecting both man and snakes has also led to their deaths. Epidemiology of snake bites among selected communities in the enclave of ...

  18. Convicted by a bite mark, Ted Bundy (1946-1989).

    Science.gov (United States)

    Riaud, Xavier

    2014-01-01

    The identification of a murderer and the eventual conviction was largely due to forensic dentistry and in particular the use of bite marks on the victim compared with casts of the teeth of the accused. The Bundy case has become notorious in American legal circles.

  19. Tick Talk: Block Tick Bites and Lyme Disease

    Science.gov (United States)

    ... this issue Tick Talk Block Tick Bites and Lyme Disease En español Send us your comments When warm ... mainly in the mid-Atlantic and southern states. Lyme disease is the most common tick-borne illness. It’s ...

  20. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... care Injured skin Bug bites and stings "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs. ... t", "hpos=l", "zone=public", "mcat1=de12", ]; for (var c = 0; c "); (function () { var a = "", b = [ "adid= ...

  1. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... dress appropriately to prevent bug bites. Cover exposed skin as much as possible by wearing long-sleeved shirts, pants, socks and closed shoes instead of sandals. For additional protection, pull your socks up over your pants and ...

  2. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... it’s important to take steps to reduce your risk. To help prevent bug bites, dermatologists recommend the ...

  3. Acute Generalized Exanthematous Pustulosis (AGEP Triggered by a Spider Bite

    Directory of Open Access Journals (Sweden)

    Michael Makris

    2009-01-01

    Discussion: A spider bite may represent a possible causative factor of AGEP. A spider's venom contains sphingomyelinase that stimulates the release of IL8 and GM-CSF, which are involved in AGEP pathogenesis. Whether or not the con-current use of antibiotics has an effect in AGEP appearance when combined with a spider's venom, cannot be excluded.

  4. Neurological manifestations in speech after snake bite: A rare case ...

    African Journals Online (AJOL)

    Neurological manifestations in speech after snake bite: A rare case. D Vir, D Gupta, M Modi, N Panda. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/pamj.v4i1.53597 · AJOL African Journals Online. HOW TO ...

  5. Bug bites and stings: When to see a dermatologist

    Medline Plus

    Full Text Available ... Private payer Medicare physician payment MACRA implementation Alternative payment models Fee schedule State policy State policy and action ... a dermatologist Why see a board-certified dermatologist? Home Public and patients Skin, hair, and nail care Injured skin Bug bites and stings "); (function () { var ...

  6. Dielectric Analysis for Torque of a Solute Ion Coulomb Force Monopole Motor

    Science.gov (United States)

    Fresco, Anthony N.

    ASME Technical Paper ES2010-90396 "Solute Ion Coulomb Force Monopole Motor and Solute Ion Linear Alignment Propulsion" by the author describes a motor that is based on an arrangement of solute ion electric field monopoles.[1] That is, through a process called capacitive deionization, sodium and chlorine ions in salt water are captured and confined by an electrically conductive material to form electric field monopoles. At least four of the like charged monopoles (all negative or all positive) can be arranged on a disc. At least one stationary monopole of the same charge is placed adjacent to the disc and positioned so that a repulsive electric field is formed between the stationary monopole and at least one of the monopoles positioned on the disc so that the disc is then forced to rotate a shaft at the center of the disc. This paper analyzes the behavior of the dielectric materials forming part of the monopoles to show that the net torque on the motor is greater than zero and also illustrates a novel effect of polarization of a dielectric material positioned between two like-charged monopoles as occurs in the configuration of the monopole motor and a deficiency in the conventional closed path analysis for work performed during movement of electric charges that emit electrostatic fields by failing to consider the effects of dielectric materials in shielding the electrostatic fields. The monopole motor connected to an to electrical generator can provide continuous on-board electrical power to electrical loads for local and deep space applications including power to electrode assemblies designed for linear alignment of like-charged solute ions as a means of propulsion and particle acceleration as described in the ES2010-90396 paper. Details of the monopole motor and the propulsion are available in WO 2008/024927 A2 (and US2010/0199632 A1) "Solute Ion Coulomb Force Acceleration and Electric Field Monopole Passive Voltage Source" by the author Ref.[2].

  7. An automated analysis workflow for optimization of force-field parameters using neutron scattering data

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, Vickie E.; Borreguero, Jose M. [Neutron Data Analysis & Visualization Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Bhowmik, Debsindhu [Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Ganesh, Panchapakesan; Sumpter, Bobby G. [Center for Nanophase Material Sciences, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Proffen, Thomas E. [Neutron Data Analysis & Visualization Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Goswami, Monojoy, E-mail: goswamim@ornl.gov [Center for Nanophase Material Sciences, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States)

    2017-07-01

    Graphical abstract: - Highlights: • An automated workflow to optimize force-field parameters. • Used the workflow to optimize force-field parameter for a system containing nanodiamond and tRNA. • The mechanism relies on molecular dynamics simulation and neutron scattering experimental data. • The workflow can be generalized to any other experimental and simulation techniques. - Abstract: Large-scale simulations and data analysis are often required to explain neutron scattering experiments to establish a connection between the fundamental physics at the nanoscale and data probed by neutrons. However, to perform simulations at experimental conditions it is critical to use correct force-field (FF) parameters which are unfortunately not available for most complex experimental systems. In this work, we have developed a workflow optimization technique to provide optimized FF parameters by comparing molecular dynamics (MD) to neutron scattering data. We describe the workflow in detail by using an example system consisting of tRNA and hydrophilic nanodiamonds in a deuterated water (D{sub 2}O) environment. Quasi-elastic neutron scattering (QENS) data show a faster motion of the tRNA in the presence of nanodiamond than without the ND. To compare the QENS and MD results quantitatively, a proper choice of FF parameters is necessary. We use an efficient workflow to optimize the FF parameters between the hydrophilic nanodiamond and water by comparing to the QENS data. Our results show that we can obtain accurate FF parameters by using this technique. The workflow can be generalized to other types of neutron data for FF optimization, such as vibrational spectroscopy and spin echo.

  8. Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis

    Directory of Open Access Journals (Sweden)

    Asit Kumar Parida

    2017-04-01

    Full Text Available In the present work, the variation of nose radius on forces, cutting temperature, stress, has been studied using finite element modeling in hot turning operation of Inconel 718. Three values of nose radius were taken (0.4, 0.8 and 1.2 mm. Cutting force, thrust force, stress, and cutting temperature have been predicted using commercial DEFORM™ software at different cutting tool nose radius in both room and heated conditions. With the increase of tool nose radius in both room and elevated machining conditions the cutting force and thrust force increased. The cutting temperature, chip thickness and chip tool contact length also have been studied. In order to validate the numerical results an experimental analysis has been performed and good agreement between them has been observed

  9. Method for analyzing electromagnetic-force-induced vibration and noise analysis; Denjiryoku reiki ni yoru dendoki no shindo hoshaon kaisekiho

    Energy Technology Data Exchange (ETDEWEB)

    Shiohata, K.; Nemoto, K.; Nagawa, Y.; Sakamoto, S.; Kobayashi, T.; Ito, M.; Koharagi, H. [Hitachi, Ltd, Tokyo (Japan)

    1998-11-01

    In this analysis method, electromagnetic force calculated by 2-dimensional analysis is transformed into external force for 3-dimensional structural-vibration analysis. And a modeling procedure for a vibrating structure is developed. Further, a space-modal-resonance criteria which relates electromagnetic force to structural-vibration or noise is introduced. In the structural-vibration analysis, the finite element method is used; and in the noise analysis, the boundary element method is used. Finally, vibration and noise of an induction motor are calculated using this criteria. Consequently, high-accuracy modeling is achieved and noise the calculated by the simulation almost coincides with that obtained by experiments. And it is clarified that the-space-modal resonance criteria is effective in numerical simulation. 11 refs., 9 figs., 3 tabs.

  10. Comparative Biomechanical Modeling of Metatherian and Placental Saber-Tooths: A Different Kind of Bite for an Extreme Pouched Predator.

    Science.gov (United States)

    Wroe, Stephen; Chamoli, Uphar; Parr, William C H; Clausen, Philip; Ridgely, Ryan; Witmer, Lawrence

    2013-01-01

    Questions surrounding the dramatic morphology of saber-tooths, and the presumably deadly purpose to which it was put, have long excited scholarly and popular attention. Among saber-toothed species, the iconic North American placental, Smilodon fatalis, and the bizarre South American sparassodont, Thylacosmilus atrox, represent extreme forms commonly forwarded as examples of convergent evolution. For S. fatalis, some consensus has been reached on the question of killing behaviour, with most researchers accepting the canine-shear bite hypothesis, wherein both head-depressing and jaw closing musculatures played a role in delivery of the fatal bite. However, whether, or to what degree, T. atrox may have applied a similar approach remains an open question. Here we apply a three-dimensional computational approach to examine convergence in mechanical performance between the two species. We find that, in many respects, the placental S. fatalis (a true felid) was more similar to the metatherian T. atrox than to a conical-toothed cat. In modeling of both saber-tooths we found that jaw-adductor-driven bite forces were low, but that simulations invoking neck musculature revealed less cranio-mandibular stress than in a conical-toothed cat. However, our study also revealed differences between the two saber-tooths likely reflected in the modus operandi of the kill. Jaw-adductor-driven bite forces were extremely weak in T. atrox, and its skull was even better-adapted to resist stress induced by head-depressors. Considered together with the fact that the center of the arc described by the canines was closer to the jaw-joint in Smilodon, our results are consistent with both jaw-closing and neck musculature playing a role in prey dispatch for the placental, as has been previously suggested. However, for T. atrox, we conclude that the jaw-adductors probably played no major part in the killing bite. We propose that the metatherian presents a more complete commitment to the already

  11. Longitudinal growth changes in subjects with open-bite tendency: a retrospective study.

    Science.gov (United States)

    Phelan, Angie; Franchi, Lorenzo; Baccetti, Tiziano; Darendeliler, M Ali; McNamara, James A

    2014-01-01

    This study was a cephalometric evaluation of the growth changes in untreated subjects with minimal overbite at 4 time points during 4 developmental stages from the early mixed dentition to the permanent dentition, as well as from the prepubertal phase to young adulthood. A sample of 24 untreated subjects with minimal overbite (<1.5 mm) was selected retrospectively from the University of Michigan Growth Study and the Denver Child Growth Study. The sample was followed longitudinally from about 9 years of age through 17 years of age. Dentofacial changes at the 4 times (T1-T4), defined by the cervical vertebral maturation method, were analyzed on lateral cephalograms. Nonparametric statistical analysis was used for comparisons. Overbite on average increased by 2.3 mm during the overall observation period. Improvement occurred during the prepubertal interval (T1-T2; 2.4 mm), whereas no significant changes occurred in the pubertal and postpubertal stages. From prepubertal ages to young adulthood, the open-bite tendency improved in 91% of the subjects, with self-correction in 75%. Logistic regression analysis on the cephalometric variables at T1 with the value of overbite at T4 did not show a statistically significant correlation. Subjects with an open-bite tendency show improvement of their occlusal condition during the prepubertal stage, but there is no significant improvement after this. These results provide useful indications for appropriate orthodontic treatment timing for patients with an open-bite tendency. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  12. The management of dog bite injuries of genitalia in paediatric age

    Directory of Open Access Journals (Sweden)

    Mirko Bertozzi

    2013-01-01

    Full Text Available Dog bite injuries are common in children and represent an important health-care problem. Most dog bite injuries involve the face or an extremity. Victims tend to seek medical care quickly. Dog bites to the external genitalia are rarely reported, but they potentially result in morbidity if improperly managed. Morbidity is also directly related to the severity of initial wound. Guidelines for the management of dog bites include irrigation, dιbridment, antibiotic therapy, consideration of tetanus and rabies immunisation and suture of wounds or surgical reconstruction. Literature review was conducted and focused to analyze the management of dog bite lesions involving external genitalia.

  13. Analysis of free and forced excitation tests of 394 KN isolated structure mock-up

    International Nuclear Information System (INIS)

    Serino, G.; Martelli, A.; Bonacina, G.

    1993-01-01

    At the 1991 ASME-PVP Conference, some first experimental results obtained from static and dynamic tests on high damping steel laminated rubber bearings (Martelli et al., 1991) and from free and forced excitation tests on a 394 kN isolated structure mock-up were presented (Forni et al., 1991). In this paper, the most significant test data are reorganized and discussed in order to assess the suitability of single bearing test results to predict the dynamic response of an isolated structure. Three mathematical models of the single isolator having different levels of approximation are proposed, and their capability to estimate the experimental response of the mock-up is evaluated. It is shown that a non-linear hysteretic model, defined by three rubber parameters only, allows a very good complete simulation of the dynamic behavior of the isolated structure in both free and forced vibration tests. A simpler equivalent linear viscous model permits a good prediction of the peak absolute acceleration and relative displacement values if bearing stiffness and damping parameters are properly selected, and can be used in a response spectrum analysis, but reproduces less exactly the experimental behavior. An equivalent linear hysteretic model represents more correctly the actual rubber damping behavior, but gives results very similar to those obtained through the equivalent linear viscous model because of the practically mono-frequencial response of the isolated structure

  14. Proposal for a Mini Wireless Force Platform for Human Gait Analysis

    Directory of Open Access Journals (Sweden)

    Giovani PIFFER

    2011-12-01

    Full Text Available This paper aims to develop a mini wireless force platform placed in the shoe sole for analysis of human gait. The platform consists of a machined aluminum mechanical structure fixed into a sole, whose sensors are electrical resistance strain gages strategically cemented at the points of greatest deformation of the structure. The strain gages are configured as a ½ Wheatstone bridge connected to an amplifier for output signals and filtered by a signal conditioner. The signals are conditioned using a data acquisition board in conjunction with a graphical interface developed in LabVIEW. The static and dynamic behavior of the eight load cells was evaluated. Calibration at static pressures has shown that the eight load cells are linear within the usage range from 0 kgf to 45 kgf. The dynamic response has determined that the first vibration mode is around 1 kHz, indicating that the load cells have no resonance during the test. Three subjects carried out gait tests to examine the range of force platform use, and these tests demonstrated that the signals obtained are consistent with the classical references in this area.

  15. Estimation of changes in dynamic hydraulic force in a magnetically suspended centrifugal blood pump with transient computational fluid dynamics analysis.

    Science.gov (United States)

    Masuzawa, Toru; Ohta, Akiko; Tanaka, Nobuatu; Qian, Yi; Tsukiya, Tomonori

    2009-01-01

    The effect of the hydraulic force on magnetically levitated (maglev) pumps should be studied carefully to improve the suspension performance and the reliability of the pumps. A maglev centrifugal pump, developed at Ibaraki University, was modeled with 926 376 hexahedral elements for computational fluid dynamics (CFD) analyses. The pump has a fully open six-vane impeller with a diameter of 72.5 mm. A self-bearing motor suspends the impeller in the radial direction. The maximum pressure head and flow rate were 250 mmHg and 14 l/min, respectively. First, a steady-state analysis was performed using commercial code STAR-CD to confirm the model's suitability by comparing the results with the real pump performance. Second, transient analysis was performed to estimate the hydraulic force on the levitated impeller. The impeller was rotated in steps of 1 degrees using a sliding mesh. The force around the impeller was integrated at every step. The transient analysis revealed that the direction of the radial force changed dynamically as the vane's position changed relative to the outlet port during one circulation, and the magnitude of this force was about 1 N. The current maglev pump has sufficient performance to counteract this hydraulic force. Transient CFD analysis is not only useful for observing dynamic flow conditions in a centrifugal pump but is also effective for obtaining information about the levitation dynamics of a maglev pump.

  16. Open Fracture of the Forearm Bones due to Horse Bite

    Directory of Open Access Journals (Sweden)

    John Ashutosh Santoshi

    2014-01-01

    Full Text Available Introduction: Fractures have been described mainly following falling accidents in horse-related injuries. Horse bites are uncommon accidents. We present a case of open fracture of the forearm due to horse bite. Case Report: A 35-year-old male farm-worker presented to the emergency room with alleged history of horse bite to the right forearm about 2 hours prior to presentation while feeding the horse. There was deformity of the forearm with multiple puncture wounds, deep abrasions and small lacerations on the distal-third of the forearm. Copious irrigation with normal saline was done and he was administered anti-tetanus and post-exposure rabies prophylaxis. Prophylactic antibiotic therapy was commenced. Radiographs revealed fracture of radius and ulna in the mid-shaft region. He underwent emergency wound debridement, and the ulna was stabilised with an intra-medullary square nail. Seventy-two hours later, he underwent re-debridement and conversion osteosynthesis. He had an uneventful recovery and at three-month follow-up, the fractures had healed radiographically in anatomic alignment. At two-year follow-up, he is doing well, is pain free and has a normal range of motion compared to the contralateral side. Conclusion: Horse bites behave as compound fractures however rabies prophylaxis will be needed and careful observation is needed. Early radical debridement, preliminary skeletal stabilisation, re-debridement and conversion osteosynthesis to plate, and antibiotic prophylaxis were the key to the successful management of our patient. Keywords: Horse; animal bite; forearm; open fracture

  17. Influence of the atomic force microscope tip on the multifractal analysis of rough surfaces

    International Nuclear Information System (INIS)

    Klapetek, Petr; Ohlidal, Ivan; Bilek, Jindrich

    2004-01-01

    In this paper, the influence of atomic force microscope tip on the multifractal analysis of rough surfaces is discussed. This analysis is based on two methods, i.e. on the correlation function method and the wavelet transform modulus maxima method. The principles of both methods are briefly described. Both methods are applied to simulated rough surfaces (simulation is performed by the spectral synthesis method). It is shown that the finite dimensions of the microscope tip misrepresent the values of the quantities expressing the multifractal analysis of rough surfaces within both the methods. Thus, it was concretely shown that the influence of the finite dimensions of the microscope tip changed mono-fractal properties of simulated rough surface to multifractal ones. Further, it is shown that a surface reconstruction method developed for removing the negative influence of the microscope tip does not improve the results obtained in a substantial way. The theoretical procedures concerning both the methods, i.e. the correlation function method and the wavelet transform modulus maxima method, are illustrated for the multifractal analysis of randomly rough gallium arsenide surfaces prepared by means of the thermal oxidation of smooth gallium arsenide surfaces and subsequent dissolution of the oxide films

  18. Detrended partial cross-correlation analysis of two nonstationary time series influenced by common external forces

    Science.gov (United States)

    Qian, Xi-Yuan; Liu, Ya-Min; Jiang, Zhi-Qiang; Podobnik, Boris; Zhou, Wei-Xing; Stanley, H. Eugene

    2015-06-01

    When common factors strongly influence two power-law cross-correlated time series recorded in complex natural or social systems, using detrended cross-correlation analysis (DCCA) without considering these common factors will bias the results. We use detrended partial cross-correlation analysis (DPXA) to uncover the intrinsic power-law cross correlations between two simultaneously recorded time series in the presence of nonstationarity after removing the effects of other time series acting as common forces. The DPXA method is a generalization of the detrended cross-correlation analysis that takes into account partial correlation analysis. We demonstrate the method by using bivariate fractional Brownian motions contaminated with a fractional Brownian motion. We find that the DPXA is able to recover the analytical cross Hurst indices, and thus the multiscale DPXA coefficients are a viable alternative to the conventional cross-correlation coefficient. We demonstrate the advantage of the DPXA coefficients over the DCCA coefficients by analyzing contaminated bivariate fractional Brownian motions. We calculate the DPXA coefficients and use them to extract the intrinsic cross correlation between crude oil and gold futures by taking into consideration the impact of the U.S. dollar index. We develop the multifractal DPXA (MF-DPXA) method in order to generalize the DPXA method and investigate multifractal time series. We analyze multifractal binomial measures masked with strong white noises and find that the MF-DPXA method quantifies the hidden multifractal nature while the multifractal DCCA method fails.

  19. Remote sensing monitoring and driving force analysis to forest and greenbelt in Zhuhai

    Science.gov (United States)

    Yuliang Qiao, Pro.

    As an important city in the southern part of Chu Chiang Delta, Zhuhai is one of the four special economic zones which are opening up to the outside at the earliest in China. With pure and fresh air and trees shading the street, Zhuhai is a famous beach port city which is near the mountain and by the sea. On the basis of Garden City, the government of Zhuhai decides to build National Forest City in 2011, which firstly should understand the situation of greenbelt in Zhuhai in short term. Traditional methods of greenbelt investigation adopt the combination of field surveying and statistics, whose efficiency is low and results are not much objective because of artificial influence. With the adventure of the information technology such as remote sensing to earth observation, especially the launch of many remote sensing satellites with high resolution for the past few years, kinds of urban greenbelt information extraction can be carried out by using remote sensing technology; and dynamic monitoring to spatial pattern evolvement of forest and greenbelt in Zhuhai can be achieved by the combination of remote sensing and GIS technology. Taking Landsat5 TM data in 1995, Landsat7 ETM+ data in 2002, CCD and HR data of CBERS-02B in 2009 as main information source, this research firstly makes remote sensing monitoring to dynamic change of forest and greenbelt in Zhuhai by using the combination of vegetation coverage index and three different information extraction methods, then does a driving force analysis to the dynamic change results in 3 months. The results show: the forest area in Zhuhai shows decreasing tendency from 1995 to 2002, increasing tendency from 2002 to 2009; overall, the forest area show a small diminution tendency from 1995 to 2009. Through the comparison to natural and artificial driving force, the artificial driving force is the leading factor to the change of forest and greenbelt in Zhuhai. The research results provide a timely and reliable scientific basis

  20. Factor Structure of the Air Force Officer Qualifying Test: Analysis and Comparison

    National Research Council Canada - National Science Library

    Carreta, Thomas

    1998-01-01

    The Air Force Officer Qualifying Test (AFOQT) is used to qualify men and women for commissions in the Air Force, classify them for pilot and navigator jobs, and award Reserve Officer Training Corps (ROTC) scholarships...