WorldWideScience

Sample records for bismuth feed system

  1. Liquid Bismuth Feed System for Electric Propulsion

    Science.gov (United States)

    Markusic, T. E.; Polzin, K. A.; Stanojev, B. J.

    2006-01-01

    Operation of Hall thrusters with bismuth propellant has been shown to be a promising path toward high-power, high-performance, long-lifetime electric propulsion for spaceflight missions. For example, the VHITAL project aims td accurately, experimentally assess the performance characteristics of 10 kW-class bismuth-fed Hall thrusters - in order to validate earlier results and resuscitate a promising technology that has been relatively dormant for about two decades. A critical element of these tests will be the precise metering of propellant to the thruster, since performance cannot be accurately assessed without an accurate accounting of mass flow rate. Earlier work used a pre/post-test propellant weighing scheme that did not provide any real-time measurement of mass flow rate while the thruster was firing, and makes subsequent performance calculations difficult. The motivation of the present work was to develop a precision liquid bismuth Propellant Management System (PMS) that provides real-time propellant mass flow rate measurement and control, enabling accurate thruster performance measurements. Additionally, our approach emphasizes the development of new liquid metal flow control components and, hence, will establish a basis for the future development of components for application in spaceflight. The design of various critical components in a bismuth PMS are described - reservoir, electromagnetic pump, hotspot flow sensor, and automated control system. Particular emphasis is given to material selection and high-temperature sealing techniques. Open loop calibration test results are reported, which validate the systems capability to deliver bismuth at mass flow rates ranging from 10 to 100 mg/sec with an uncertainty of less than +/- 5%. Results of integrated vaporizer/liquid PMS tests demonstrate all of the necessary elements of a complete bismuth feed system for electric propulsion.

  2. Bismuth Propellant Feed System Development at NASA-MSFC

    Science.gov (United States)

    Polzin, Kurt A.

    2007-01-01

    NASA-MSFC has been developing liquid metal propellant feed systems capable of delivering molten bismuth at a prescribed mass flow rate to the vaporizer of an electric thruster. The first such system was delivered to NASA-JPL as part of the Very High Isp Thruster with Anode Layer (VHITAL) program. In this system, the components pictured were placed in a vacuum chamber and heated while the control electronics were located outside the chamber. The system was successfully operated at JPL in conjunction with a propellant vaporizer, and data was obtained demonstrating a new liquid bismuth flow sensing technique developed at MSFC. The present effort is aimed at producing a feed-system for use in conjunction with a bismuth-fed Hall thruster developed by Busek Co. Developing this system is more ambitious, however, in that it is designed to self-contain all the control electronics inside the same vacuum chamber as an operating bismuth-fed thruster. Consequently, the entire system, including an on-board computer, DC-output power supplies, and a gas-pressurization electro-pneumatic regulator, must be designed to survive a vacuum environment and shielded to keep bismuth plasma from intruding on the electronics and causing a shortcircuit. In addition, the hot portions of the feed system must be thermally isolated from the electronics to avoid failure due to high heat loads. This is accomplished using a thermal protection system (TPS) consisting of multiple layers of aluminum foil. The only penetrations into the vacuum chamber are an electrically isolated (floating) 48 VDC line and a fiberoptic line. The 48 VDC provides power for operation of the power supplies and electronics co-located with the system in the vacuum chamber. The fiberoptic Ethernet connection is used to communicate user-input control commands to the on-board computer and transmit real-time data back to the external computer. The partially assembled second-generation system is shown. Before testing at Busek, a

  3. The development of a bismuth feed system for the very high Isp thruster with anode layer VHITAL program

    Science.gov (United States)

    Marrese-Reading, Colleen; Markusic, Tom; Polzin, Kurt; Knowles, Timothy; Mueller, Juergen

    2005-01-01

    A bismuth feed system was developed for the VHITAL Program to deliver 8-12 mg/s of bismuth vapor at a few Torr to the VHITAL-160. A carbon vaporizer developed to control vapor flow rates to the thruster.

  4. Infectious waste feed system

    Science.gov (United States)

    Coulthard, E. James

    1994-01-01

    An infectious waste feed system for comminuting infectious waste and feeding the comminuted waste to a combustor automatically without the need for human intervention. The system includes a receptacle for accepting waste materials. Preferably, the receptacle includes a first and second compartment and a means for sealing the first and second compartments from the atmosphere. A shredder is disposed to comminute waste materials accepted in the receptacle to a predetermined size. A trough is disposed to receive the comminuted waste materials from the shredder. A feeding means is disposed within the trough and is movable in a first and second direction for feeding the comminuted waste materials to a combustor.

  5. Condensate feeding system

    International Nuclear Information System (INIS)

    Iwami, Hiroshi.

    1981-01-01

    Purpose: To control the dissolved oxygen concentration in water of a condensate feeding system to a desired level. Constitution: Coolant is fed to a nuclear reactor through a route from the steam exit of the reactor and by way of turbine, turbine condensator, condensate pump, condensate desalinator, feedwater heater and feed pump. Steam extraction lines are branched from the turbines, and pipeways are further branched from the steam extraction lines for feeding steam by way of extraction steam injection valves to steam-water mixers disposed on the upstream of the feedwater heater. On the downstream of the feedwater heater, is provided a dissolved oxygen concentration meter, the indication value of which controls the opening degree of the steam injection valves which, in turn, controls the opening degree of the steam feed valves for the feedwater heater to adjust the amount for the injection steams. Accordingly, the dissolved oxygen concentration in the water of the condensate feeding system can be controlled by the inclusion of steams with high dissolved oxygen concentration into the feedwater system from the turbine steam extraction lines by way of the mixers. (Furukawa, Y.)

  6. Bismuth Subsalicylate

    Science.gov (United States)

    Pink Bismuth® ... Bismuth subsalicylate is used to treat diarrhea, heartburn, and upset stomach in adults and children 12 years of age and older. Bismuth subsalicylate is in a class of medications called ...

  7. Electrodeposition and characterization of manganese-bismuth system from chloride based acidic bath

    Energy Technology Data Exchange (ETDEWEB)

    Benfedda, B., E-mail: baya_pg@yahoo.f [Laboratoire de Physique et Chimie des Materiaux (LPCM), Universite M. Mammeri de Tizi-Ouzou (Algeria); Benbrahim, N.; Kadri, A. [Laboratoire de Physique et Chimie des Materiaux (LPCM), Universite M. Mammeri de Tizi-Ouzou (Algeria); Chainet, E. [Laboratoire d' Electrochimie et de Physico-chimie des Materiaux et des Interfaces (LEPMI), ENSEEG, 1130 rue de la piscine, B.P. 75, 38402 Saint Martin d' Heres, Grenoble (France); Charlot, F.; Coindeau, S. [C.M.T.C., Grenoble I.N.P. Bat Phelma Campus, Domaine Universitaire, B.P. 75, 1260 rue de la piscine, 38402 Saint Martin d' Heres (France)

    2011-01-01

    In this work, Mn-Bi system has been successfully electrodeposited on Cu/Si substrates from aqueous ammonium chloride containing electrolyte. A thermodynamic study of the electrolysis bath highlights the possible formation of manganese complexes (MnCl{sup +}, MnCl{sub 2},MnCl{sub 3}{sup -}) and bismuth complexes (BiCl{sup 2+},BiCl{sub 2}{sup +}, BiCl{sub 3},BiCl{sub 4}{sup -},BiCl{sub 5}{sup 2-},BiCl{sub 6}{sup 3-}). The mechanism process involving Mn and Bi electrodeposition is investigated by cyclic voltammetry. Mn-Bi films can be grown under potentiostatic control. The physico-chemical, morphological and structural characterizations of the deposits were carried out by scanning electron microscopy (SEM) and X-rays analysis (XRD). The results reveal a granular surface quality and a heterogeneous chemical composition of the films. The energy dispersive spectroscopy (EDS) analysis reveals the presence of manganese and bismuth peaks whose relative intensities vary according to the imposed potential and the position on the sample. The X-rays diffraction analysis showed three different crystalline phases: {alpha}-manganese (body centred cubic system), {gamma}-manganese (body centred tetragonal system) and bismuth (rhombohedral system).

  8. Prospects of complete feed system in ruminant feeding: A review.

    Science.gov (United States)

    Beigh, Yasir Afzal; Ganai, Abdul Majeed; Ahmad, Haidar Ali

    2017-04-01

    Effective utilization of available feed resources is the key for economical livestock rearing. Complete feed system is one of the latest developments to exploit the potential of animal feed resources in the best possible way. The complete feed is a quantitative mixture of all dietary ingredients, blended thoroughly to prevent separation and selection, fed as a sole source of nutrients except water and is formulated in a desired proportion to meet the specific nutrient requirements. The concentrate and roughage levels may vary according to the nutrient requirement of ruminants for different production purposes. The complete feed with the use of fibrous crop residue is a noble way to increase the voluntary feed intake and thus animal's production performance. In this system of feeding, the ruminant animals have continuous free choice availability of uniform feed mixture, resulting in more uniform load on the rumen and less fluctuation in release of ammonia which supports more efficient utilization of ruminal non-protein nitrogen. Feeding complete diet stabilizes ruminal fermentation, thereby improves nutrient utilization. This feeding system allows expanded use of agro-industrial by-products, crop residues and nonconventional feeds in ruminant ration for maximizing production and minimizing feeding cost, thus being increasingly appreciated. However, to extend the concept extensively to the field and make this technology successful and viable for farmers, more efforts are needed to be taken.

  9. Adsorption and condensation of bismuth on tungsten

    International Nuclear Information System (INIS)

    Radon, T.; Sidorski, Z.

    1979-01-01

    The bismuth-tungsten system was studied by means of field emission microscopy. The average work function changes induced by the bismuth adsorption were measured for different amounts of adsorbed bismuth. It was found that the adsorption of bismuth changes the work function of tungsten only slightly. The penetration of bismuth into the tungsten substrate was observed. The growth of bismuth single crystals was studied when bismuth was deposited with a rate of about 6 monolayers per minute onto the tungsten substrate and kept at 470 K. Bismuth single crystals with two-fold symmetry occurred most often on the (100) tungsten planes. On the (111) tungsten plane bismuth crystals with three-fold symmetry were observed. An explanation of the observed phenomena is proposed. (Auth.)

  10. Polonium release from an ATW burner system with liquid lead-bismuth coolant

    International Nuclear Information System (INIS)

    Li, N.; Yefimov, E.; Pankratov, D.

    1998-04-01

    The authors analyzed polonium release hazards in a conceptual pool-type ATW burner with liquid lead-bismuth eutectic (LBE) coolant. Simplified quantitative models are used based on experiments and real NPP experience. They found little Po contamination outside the burner under normal operating conditions with nominal leakage from the gas system. In sudden gas leak and/or coolant spill accidents, the P contamination level can reach above the regulation limit but short exposure would not lead to severe health consequences. They are evaluating and developing mitigation methods

  11. Extraction of lanthanide elements and bismuth in molten lithium chloride-liquid bismuth-lithium alloy system

    International Nuclear Information System (INIS)

    Harada, Makoto; Adachi, Motonari; Kai, Yuichi; Koike, Kenichi

    1987-01-01

    The equilibrium distributions of neodymium and samarium between molten LiCl and liquid Bi-Li alloy were measured in a wide range of Li-mole fraction in the alloy phase, X Li . These lanthanide elements were extracted through redox reactions. In high X Li range, X Li > 0.03, the distributions of neodymium and bismuth in the salt phase increased markedly. The anomalous increase is attributed to the formation of the compound comprized of Nd, Li, Bi and oxygen in the salt phase. The reaction processes in samarium and neodymium were very fast and the extraction rates are controlled by the diffusion processes of the solutes and metallic lithium. (author)

  12. Simultaneous removal of Cr(VI) and phenol contaminants using Z-scheme bismuth oxyiodide/reduced graphene oxide/bismuth sulfide system under visible-light irradiation.

    Science.gov (United States)

    Chen, Acong; Bian, Zhaoyong; Xu, Jie; Xin, Xin; Wang, Hui

    2017-12-01

    An all-solid-state Z-scheme system containing Bi-based semiconductors bismuth oxyiodide (BiOI) and bismuth sulfide (Bi 2 S 3 ) was constructed on reduced graphene oxide (rGO) sheets through an electrostatic self-assembly method to simultaneously remove aqueous Cr(VI) and phenol. In this Z-scheme that mimicked natural photosynthesis, photoinduced electrons in the conduction band (CB) of BiOI were transferred through rGO and reacted with photoinduced holes in the valence band (VB) of Bi 2 S 3 , which significantly increased its photocatalytic activity. The reduction and oxidation reactions were performed on Bi 2 S 3 and BiOI photocatalysts, respectively. Furthermore, complex contaminants of coexisting heavy metal Cr(VI) and organic phenol were treated using the system under visible-light irradiation. Results showed that Cr(VI) reduction and phenol oxidation were achieved efficiently with optimum reductive and oxidative efficiencies up to 73% and 95% under visible-light irradiation, respectively. This work provided a promising method of simultaneously removing heavy metals and organic pollutants by using a Z-scheme system with enhanced photocatalytic activity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Neutronics design for lead-bismuth cooled accelerator-driven system for transmutation of minor actinide

    International Nuclear Information System (INIS)

    Tsujimoto, Kazufumi; Sasa, Toshinobu; Nishihara, Kenji; Oigawa, Hiroyuki; Takano, Hideki

    2004-01-01

    Neutronics design study was performed for lead-bismuth cooled accelerator-driven system (ADS) to transmute minor actinides. Early study for ADS indicated two problems: a large burnup reactivity swing and a significant peaking factor. To solve these problems, effect of design parameters on neutronics characteristics were searched. The design parameters were initial plutonium loading, buffer region between spallation target and core, and zone fuel loading. Parametric survey calculations were performed considering fuel cycle consisting of burnup and recycle. The results showed that burnup reactivity swing depends on the plutonium fraction in the initial fuel loading, and the lead-bismuth buffer region and the two-zone loading were effective for solving the problems. Moreover, an optimum value for the effective multiplication factor was also evaluated using reactivity coefficients. From the result, the maximum allowable value of the effective multiplication factor for a practical ADS can be set at 0.97. Consequently, a new core concept combining the buffer region and the two-zone loading was proposed base on the results of the parametric survey. (author)

  14. Bismuth toxicity in patients treated with bismuth iodoform paraffin packs.

    Science.gov (United States)

    Atwal, A; Cousin, G C S

    2016-01-01

    Bismuth is a heavy metal used in bismuth iodoform paraffin paste (BIPP) antiseptic dressings and in a number of other medical preparations. It can be absorbed systemically and cause toxicity. We report 2 cases of such neurotoxicity after it was used in operations on the jaws. Copyright © 2015. Published by Elsevier Ltd.

  15. Measurement system for nuclear safeguards based on bismuth-germanate scintillators

    International Nuclear Information System (INIS)

    Moss, C.E.; Dowdy, E.J.; Evans, A.E.; Hamm, M.E.; Lucas, M.C.; Shunk, E.R.

    1983-01-01

    To determine gamma-ray flux spectra, with high efficiency as the foremost objective, we constructed a system that uses bismuth-germanage scintillators as sensors. The system, consisting of eight scintillators and a LeCroy 3500 data acquisition system, has been calibrated and characterized from 0.06 to 8.29 MeV. By fitting the calibration spectra with a function containing 17 parameters, we were able to construct theoretical response functions, which we then used to obtain the gamma-ray flux spectra at multiple space points resulting from a variety of radioactive objects of interest in nuclear safeguards. The results of our procedure agree with calculated values to within less than 10%. 6 figures

  16. Electrical characterization of strontium titanate borosilicate glass ceramics system with bismuth oxide addition using impedance spectroscopy

    International Nuclear Information System (INIS)

    Thakur, O.P.; Kumar, Devendra; Parkash, Om; Pandey, Lakshman

    2003-01-01

    The ac electrical data, measured in the frequency range 0.1 kHz-1 MHz, were used to study the electrical response of strontium titanate borosilicate glass ceramic system with bismuth oxide addition. Complex plane plots from these electrical data for various glass ceramic samples reveal contributions from simultaneously operating polarization mechanisms to overall dielectric behavior. The complex modulus (M * ) representation of electrical data for various glass ceramic samples were found to be more informative. Equivalent circuit models, which represent the electrical behavior of glass ceramic samples, were determined using complex non-linear least square (CNLS) fitting. An attempt has been made to understand the dielectric behavior of various glass ceramics in terms of contributions arising from different polarization processes occurring at glassy matrix, crystalline phases, glass to crystal interface region and blocking electrodes. Glass ceramics containing SrTiO 3 and TiO 2 (rutile) phases show thermally stable dielectric behavior

  17. Investigation of iron-bismuth-molybdenum catalysts

    International Nuclear Information System (INIS)

    Ven'yaminov, S.A.; Pitaeva, A.N.; Barannik, G.B.; Plyasova, L.M.; Maksimovskaya, R.I.; Kustova, G.N.

    1977-01-01

    Using the methods of roentgenography, derivatography, EPR-and infrared-spectroscopy, the phase composition of an iron-bismut molybdenum system is investigated. It is shown that the method of introducing iron additives substantially affects the phase composition of the system. Interaction of a mixture of bismuth and iron hydroxides with a molybdic acid solution results in the formation of bismuth and iron molybdates. If iron hydroxide reacts with previously synthesized bismuth molybdate, a compound containing bismuth, molybdenum, and iron (the X-phase) is formed in the specimens along with the bismuth and iron molybdates

  18. Transient analyses for lead–bismuth cooled accelerator-driven system

    International Nuclear Information System (INIS)

    Sugawara, Takanori; Nishihara, Kenji; Tsujimoto, Kazufumi

    2013-01-01

    Highlights: ► The transient analyses for the LBE cooled accelerator-driven system were performed. ► The purpose was to investigate the possibility of the core damage. ► All results except the protected loss of heat sink satisfied the no-damage criteria. - Abstract: The transient analyses for the lead–bismuth cooled Accelerator-Driven System (ADS) were performed with the use of the SIMMER-III and RELAP5/mod3.2 codes to investigate the possibility of the core damage. Five accidents; the beam window breakage, the protected loss of heat sink, the beam overpower, the unprotected loss of flow and the unprotected blockage accident were analyzed as the typical accidents in the ADS. Through these calculations, it was confirmed that all calculation results except the protected loss of heat sink satisfied the no-damage criteria. In the protected loss of heat sink, the cladding tube temperature reached at the melting temperature after 20 h although the calculation condition was very conservative. It is required to design a safety system of the ADS to decrease the frequencies of the accidents and to ease the accidents

  19. Transient analysis for lead-bismuth-cooled accelerator-driven system proposed by JAEA

    International Nuclear Information System (INIS)

    Sugawara, T.; Nishihara, K.; Tsujimoto, K.

    2015-01-01

    It is supposed that an Accelerator-driven System (ADS) is safer than conventional critical reactors since an ADS is driven by the external neutron source in the subcritical state. In this study, the transient analyses for the lead-bismuth cooled ADS proposed by JAEA were performed using the SIMMER-III and RELAP5/mod3.2 codes to investigate the possibility of core damage. In this research, 3 accidents: the protected loss of heat sink, the protected overcooling and the unprotected blockage accident were considered as typical ADS accidents. Through these calculations, it was confirmed that all calculation results, except for the protected loss of heat sink, fulfilled the no-damage criteria. In the protected loss of heat sink, the cladding tube temperature reached its melting temperature after 18-21 hours, although the calculation condition was very conservative. These results have led to requirements to design a safety system of the ADS to decrease the frequencies of accidents. (authors)

  20. Lead-Bismuth Eutectic cooled experimental Accelerator Driven System. Windowless target unit thermal-hydraulic analysis

    International Nuclear Information System (INIS)

    Bianchi, F.; Ferri, R.; Moreau, V.

    2004-01-01

    A main concern related to the peaceful use of nuclear energy is the safe management of nuclear wastes, with particular attention to long-lived fission products. An increasing attention has recently been addressed to transmutation systems (Accelerator Driven System: ADS) able to 'burn' the actinides and some of the long-lived fission products (High-Level Waste: HLW), transforming them in short or medium-lived wastes that may be easier managed and stored in the geological disposal, with the consequent easier acceptability by population. An ADS consists of a subcritical-core coupled with an accelerator by means of a target. This paper deals with the thermal-hydraulic analysis, performed with STAR-CD and RELAP5 codes for the windowless target unit of Lead-Bismuth Eutectic (LBE) cooled experimental ADS (XADS), both to assess its behaviour during operational and accident sequences and to provide input data for the thermal-mechanical analyses. It also reports a description of modifications properly implemented in the codes used for the assessment of this kind of plants. (author)

  1. Bismuth, Metronidazole, and Tetracycline

    Science.gov (United States)

    Helidac® (as a kit containing Bismuth Subsalicylate, Metronidazole, Tetracycline) ... Bismuth, metronidazole, and tetracycline is used along with other ulcer medications to treat duodenal ulcers. It is ...

  2. Removal of polonium contamination by lead-bismuth eutectic in nuclear systems

    International Nuclear Information System (INIS)

    Miura, Terumitsu; Obara, Toru; Sekimoto, Hiroshi

    2003-01-01

    Lead-Bismuth eutectic (LBE) is considered as a promising candidate of the coolant of liquid metal cooled fast reactor, and the coolant and/or target of accelerator driven system. LBE has various good characters for coolant, but it has also some problems such as polonium production. It is necessary to take polonium contamination into consideration, when LBE is used as the coolant. In the present paper, the removal of contaminating polonium from material surface is studied. Baking method is investigated for polonium removal from contaminated quartz glass plate in vacuum. Before and after baking, the mass of the contaminants on the surface and alpha particle counts from contaminated surface is measured. When the contaminated quartz glass plates are baked at more than 400degC for a few minutes, alpha particle counts from the surface decreases by more than 99.7%, and the mass of contaminants decreases by more than 50%. When the baking was performed at 300degC for 15 minutes and more, alpha particle count decreases by more than 80%, and the mass decreases in little. When, the baking temperature is lower than 200degC, alpha particle counts and mass do not decrease. (author)

  3. Fabrication of Nanovoid-Imbedded Bismuth Telluride with Low Dimensional System

    Science.gov (United States)

    Chu, Sang-Hyon (Inventor); Choi, Sang H. (Inventor); Kim, Jae-Woo (Inventor); Park, Yeonjoon (Inventor); Elliott, James R. (Inventor); King, Glen C. (Inventor); Stoakley, Diane M. (Inventor)

    2013-01-01

    A new fabrication method for nanovoids-imbedded bismuth telluride (Bi--Te) material with low dimensional (quantum-dots, quantum-wires, or quantum-wells) structure was conceived during the development of advanced thermoelectric (TE) materials. Bismuth telluride is currently the best-known candidate material for solid-state TE cooling devices because it possesses the highest TE figure of merit at room temperature. The innovative process described here allows nanometer-scale voids to be incorporated in Bi--Te material. The final nanovoid structure such as void size, size distribution, void location, etc. can be also controlled under various process conditions.

  4. Evaluation of gamma-ray attenuation properties of bismuth borate glass systems using Monte Carlo method

    Science.gov (United States)

    Tarim, Urkiye Akar; Ozmutlu, Emin N.; Yalcin, Sezai; Gundogdu, Ozcan; Bradley, D. A.; Gurler, Orhan

    2017-11-01

    A Monte Carlo method was developed to investigate radiation shielding properties of bismuth borate glass. The mass attenuation coefficients and half-value layer parameters were determined for different fractional amounts of Bi2O3 in the glass samples for the 356, 662, 1173 and 1332 keV photon energies. A comparison of the theoretical and experimental attenuation coefficients is presented.

  5. Investigation of iron-bismuth-molybdenum catalysts

    International Nuclear Information System (INIS)

    Ven'yaminov, S.A.; Barannik, G.B.; Pitaeva, A.N.; Sazonova, N.N.; Plyasova, L.M.

    1977-01-01

    The catalytic properties of an oxide iron-bismuth-molybdenum system in reactions of oxidative ammonolysis of propylene and oxidative dehydrogenation of butene-1 are investigated. It is shown that catalysts containing double molybdate of bismuth and iron (the X-phase) exhibit an increased catalytic activity as compared with bismuth molybdate (Bi 2 O 3 x3MoO 3 ). Preliminary reduction of such specimens increases their activity and selectivity in subsequent work under conditions of a stationary course of the oxidation reaction. The activity and selectivity of catalysts containing only bismuth molybdate and iron molybdate are due to the additivity of the properties of the separate molybdates

  6. Comparative study of lead borate and bismuth lead borate glass systems as gamma-radiation shielding materials

    International Nuclear Information System (INIS)

    Singh, Narveer; Singh, Kanwar Jit; Singh, Kulwant; Singh, Harvinder

    2004-01-01

    Gamma-ray mass attenuation coefficients have been measured experimentally and calculated theoretically for PbO-B 2 O 3 and Bi 2 O 3 -PbO-B 2 O 3 glass systems using narrow beam transmission method. These values have been used to calculate half value layer (HVL) parameter. These parameters have also been calculated theoretically for some standard radiation shielding concretes at same energies. Effect of replacing lead by bismuth has been analyzed in terms of density, molar volume and mass attenuation coefficient

  7. Solar Powered Automatic Shrimp Feeding System

    Directory of Open Access Journals (Sweden)

    Dindo T. Ani

    2015-12-01

    Full Text Available - Automatic system has brought many revolutions in the existing technologies. One among the technologies, which has greater developments, is the solar powered automatic shrimp feeding system. For instance, the solar power which is a renewable energy can be an alternative solution to energy crisis and basically reducing man power by using it in an automatic manner. The researchers believe an automatic shrimp feeding system may help solve problems on manual feeding operations. The project study aimed to design and develop a solar powered automatic shrimp feeding system. It specifically sought to prepare the design specifications of the project, to determine the methods of fabrication and assembly, and to test the response time of the automatic shrimp feeding system. The researchers designed and developed an automatic system which utilizes a 10 hour timer to be set in intervals preferred by the user and will undergo a continuous process. The magnetic contactor acts as a switch connected to the 10 hour timer which controls the activation or termination of electrical loads and powered by means of a solar panel outputting electrical power, and a rechargeable battery in electrical communication with the solar panel for storing the power. By undergoing through series of testing, the components of the modified system were proven functional and were operating within the desired output. It was recommended that the timer to be used should be tested to avoid malfunction and achieve the fully automatic system and that the system may be improved to handle changes in scope of the project.

  8. Compressor bleed cooling fluid feed system

    Science.gov (United States)

    Donahoo, Eric E; Ross, Christopher W

    2014-11-25

    A compressor bleed cooling fluid feed system for a turbine engine for directing cooling fluids from a compressor to a turbine airfoil cooling system to supply cooling fluids to one or more airfoils of a rotor assembly is disclosed. The compressor bleed cooling fluid feed system may enable cooling fluids to be exhausted from a compressor exhaust plenum through a downstream compressor bleed collection chamber and into the turbine airfoil cooling system. As such, the suction created in the compressor exhaust plenum mitigates boundary layer growth along the inner surface while providing flow of cooling fluids to the turbine airfoils.

  9. Design of 360° moveable and uniform feeding system

    Science.gov (United States)

    Zhang, Lizhen; Ma, Dihong; Yang, Mengmeng; Hu, Qingsong

    2017-06-01

    In order to solve the feeding problem in shrimp aquaculture which is high labor intensity, low automation and non-uniform feed distribution, a 360° moveable and uniform feeding system was proposed. The feeding system uses turbine worm mechanism to realize the quantitative feeding, and the turbine is conveying plate which can adjust the conveying speed according to catamaran’s cruise speed. Casting plate can achieve 360° uniform cast feed. A catamaran is used as carrier platform for feeding machine, and BeiDou satellite positioning system installed on the catamaran helps to automatic cruise. So the moveable and uniform of shrimp pond feeding can be realized in this way.

  10. Waste Feed Delivery Transfer System Analysis

    International Nuclear Information System (INIS)

    JULYK, L.J.

    2000-01-01

    This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms

  11. Waste Feed Delivery Transfer System Analysis

    Energy Technology Data Exchange (ETDEWEB)

    JULYK, L.J.

    2000-05-05

    This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms.

  12. Electrical Characteristics of MnO2 Doped Bismuth Borate Glass Systems

    Science.gov (United States)

    Nissar, Umair; Ahmad, Javed; Rana, Anwar Manzoor; Bukhari, S. H.; Jamil, M. T.; Khan, J. Alam; Shakeel, R.; Nadeem, M. Y.

    2018-02-01

    Transparent glasses have a large number of applications in the industry of electronics as well as optical devices. xMnO2-(25- x) Bi2O3-75H3BO3 (0 ≤ x ≤ 1.5 mol.%) transparent glasses have been prepared via melt-quench technique and characterized using dc electrical measurements, and by analyzing x-ray diffraction and Fourier transform infrared (FTIR) spectra. These characteristics were examined to understand the role of modifier oxides, i.e., Bi2O3 and MnO2 in the B2O3 glass network. Adding MnO2 into a glass network causes structural changes, which are responsible for any variations in electrical characteristics of bismuth borate glasses. Manganese bismuth borate glasses (MBBG) show Ohmic conduction at low fields; however, glasses with higher manganese content seem to conduct through bulk limited Poole-Frenkel mechanism. FTIR spectroscopy analyses depict the presence of BO3 and BO4 groups along with B-O-B and Bi-O-Bi bonding vibrations. Glasses with higher MnO2 content also show Mn-O bond vibrations. The reduction of BO4 groups and increase of BO3 units lead to the formation of non-bridging oxygens (NBOs) which are responsible for the variations in the electrical properties of these glasses.

  13. Overview of the use of ATHENA for thermal-hydraulic analysis of systems with lead-bismuth coolant

    International Nuclear Information System (INIS)

    Davis, C.B.; Shieh, A. S.

    2000-01-01

    The INEEL and MIT are investigating the suitability of lead-bismuth cooled fast reactor for producing low-cost electricity as well as for actinide burning. This paper is concerned with the general area of thermal-hydraulics of lead-bismuth cooled reactors. The ATHENA code is being used in the thermal-hydraulic design and analysis of lead-bismuth cooled reactors. The ATHENA code was reviewed to determine its applicability for simulating lead-bismuth cooled reactors. Two modifications were made to the code as a result of this review. Specifically, a correlation to represent heat transfer from rod bundles to a liquid metal and a void correlation based on data taken in a mixture of lead-bismuth and steam were added the code. The paper also summarizes the analytical work that is being performed with the code and plans for future analytical work

  14. Cryogenic Propellant Feed System Analytical Tool Development

    Science.gov (United States)

    Lusby, Brian S.; Miranda, Bruno M.; Collins, Jacob A.

    2011-01-01

    The Propulsion Systems Branch at NASA s Lyndon B. Johnson Space Center (JSC) has developed a parametric analytical tool to address the need to rapidly predict heat leak into propellant distribution lines based on insulation type, installation technique, line supports, penetrations, and instrumentation. The Propellant Feed System Analytical Tool (PFSAT) will also determine the optimum orifice diameter for an optional thermodynamic vent system (TVS) to counteract heat leak into the feed line and ensure temperature constraints at the end of the feed line are met. PFSAT was developed primarily using Fortran 90 code because of its number crunching power and the capability to directly access real fluid property subroutines in the Reference Fluid Thermodynamic and Transport Properties (REFPROP) Database developed by NIST. A Microsoft Excel front end user interface was implemented to provide convenient portability of PFSAT among a wide variety of potential users and its ability to utilize a user-friendly graphical user interface (GUI) developed in Visual Basic for Applications (VBA). The focus of PFSAT is on-orbit reaction control systems and orbital maneuvering systems, but it may be used to predict heat leak into ground-based transfer lines as well. PFSAT is expected to be used for rapid initial design of cryogenic propellant distribution lines and thermodynamic vent systems. Once validated, PFSAT will support concept trades for a variety of cryogenic fluid transfer systems on spacecraft, including planetary landers, transfer vehicles, and propellant depots, as well as surface-based transfer systems. The details of the development of PFSAT, its user interface, and the program structure will be presented.

  15. Advanced feed water distributing system for WWER 440 steam generators

    International Nuclear Information System (INIS)

    Matal, O.; Klinga, J.; Grazl, K.; Tischler, J.; Mihalik, M.

    1995-01-01

    The original designed feed water distributing system was replaced by an advanced one. The characteristics of both feed water distributing systems have been measured and evaluated. The paper deals with the problems of measurement and evaluation of both feed water distributing system characteristics and comparison of statistical data obtained. (orig.)

  16. Advanced feed water distributing system for WWER 440 steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Matal, O.; Klinga, J. [Energovyzkum Ltd, Brno (Switzerland); Grazl, K. [Vitkovice s.c., Ostrava (Switzerland); Tischler, J.; Mihalik, M. [SEP Atomove Elektrarne Bohunice (Slovakia)

    1995-12-31

    The original designed feed water distributing system was replaced by an advanced one. The characteristics of both feed water distributing systems have been measured and evaluated. The paper deals with the problems of measurement and evaluation of both feed water distributing system characteristics and comparison of statistical data obtained. (orig.). 3 refs.

  17. Modeling the dynamics of the lead bismuth eutectic experimental accelerator driven system by an infinite impulse response locally recurrent neural network

    International Nuclear Information System (INIS)

    Zio, Enrico; Pedroni, Nicola; Broggi, Matteo; Golea, Lucia Roxana

    2009-01-01

    In this paper, an infinite impulse response locally recurrent neural network (IIR-LRNN) is employed for modelling the dynamics of the Lead Bismuth Eutectic eXperimental Accelerator Driven System (LBE-XADS). The network is trained by recursive back-propagation (RBP) and its ability in estimating transients is tested under various conditions. The results demonstrate the robustness of the locally recurrent scheme in the reconstruction of complex nonlinear dynamic relationships

  18. Systems Genetics and Transcriptomics of Feed Efficiency in Dairy Cattle

    DEFF Research Database (Denmark)

    Salleh, Suraya Binti Mohamad; Hoglund, J.; Løvendahl, P.

    Feed is the largest variable cost in milk production industries, thus improving feed efficiency will give better use of resources. This project works closely on definitions of feed efficiency in dairy cattle and uses advanced integrated genomics, bioinformatics and systems biology methods linking...... transcriptomics differences to important attributes or traits related to dairy cattle feed efficiency. Twenty cows (10 Jersey; 10 Holstein Friesian) will be used in the experiment. These two groups of breeds will be divided into two feed efficiency groups depending on their feed efficiency status which......-hydroxybutyrates, Triacylglyceride and urea. Feed efficiency, namely Residual Feed Intake and Kleiber Ratio based on daily feed or dry matter intake, body weight and milk production records also will be calculated. The bovine RNAseq gene expression data will be analyzed using statistical-bioinformatics and systems biology...

  19. Feed the Future Monitoring System Aggregate Data 2011-2014

    Data.gov (United States)

    US Agency for International Development — The Feed the Future Monitoring System (FTFMS) is part of an interagency effort to consolidate U.S. Government (USG) reporting on Feed the Future activities. FTFMS...

  20. Bismuth and polonium

    International Nuclear Information System (INIS)

    Brown, Paul L.; Ekberg, Christian

    2016-01-01

    Bismuth and polonium are the only elements in their respective chemical series that form cations. The lighter elements in both groups only form anions. Bismuth has trivalent and pentavalent oxidation states, but the latter is relatively unstable with respect to formation of the oxide. Polonium exhibits a range of oxidation states, with the divalent and tetravalent states forming the cations Po 2+ and PoO 2+ in aqueous solution. In aqueous solution, polonium(IV) forms the oxoanion PoO 2+ . Levy, Danford and Agron conducted X-ray diffraction studies of bismuth(III) solutions and established a structure for the hexameric species, Bi 6 (OH) 12 6+ . The reported data for the solubility constants of polymeric species of bismuth (III) are listed in this chapter. The stability and solubility constants derived at 25 C for zero ionic strength have been used to create a predominance speciation diagram for bismuth(III).

  1. Feed system design for a reduced pressure tank

    Science.gov (United States)

    Lui, Hurbert

    1994-01-01

    Three designs were considered to satisfy the design objective. These designs were the current design, a Land Based Pressurized Feed System, and a fuel recirculation system. A computer code was developed to analyze the current feed system and assist in the analysis of the two experimental systems. After comparing the three concepts, the land Based Pressurized Feed System seemed to be the most promising new development. This design coupled with the piping configuration described in the report provides a justifiable fuel feed system which satisfies all the necessary requirements.

  2. Waste feed delivery program systems engineering implementation plan

    International Nuclear Information System (INIS)

    O'Toole, S.M.; Hendel, B.J.

    1998-01-01

    This document defines the systems engineering processes and products planned by the Waste Feed Delivery Program to develop the necessary and sufficient systems to provide waste feed to the Privatization Contractor for Phase 1. It defines roles and responsibilities for the performance of the systems engineering processes and generation of products

  3. Refining method for bismuth nitrate

    International Nuclear Information System (INIS)

    Shibata, Shigeyuki.

    1997-01-01

    The present invention concerns a method of separating and removing α ray emitting nuclides present in an aqueous solution of bismuth nitrate by an industrially convenient method. A nitric acid concentration in the aqueous solution of bismuth nitrate in which α ray emitting nuclides are dissolved is lowered to coprecipitate the bismuth oxynitrate and the α ray emitting nuclides. The coprecipitation materials are separated from the aqueous solution of bismuth nitrate to separate the α ray emitting nuclides dissolved in the aqueous solution of bismuth nitrate thereby refining the aqueous solution of bismuth nitrate. (T.M.)

  4. EBO feed water distribution system, experience gained from operation

    Energy Technology Data Exchange (ETDEWEB)

    Matal, O. [Energovyzkum, Brno (Switzerland); Schmidt, S.; Mihalik, M. [Atomove Elektrarne Bohunice, Jaslovske Bohunice (Switzerland)

    1997-12-31

    Advanced feed water distribution systems of the EBO design have been installed into steam generators at Units 3 and 4 of the NPP Jaslovske Bohunice (VVER 440). Experiences gained from the operation of steam generators with the advanced feed water distribution systems are discussed in the paper. (orig.). 4 refs.

  5. Tribochemistry of Bismuth and Bismuth Salts for Solid Lubrication.

    Science.gov (United States)

    Gonzalez-Rodriguez, Pablo; van den Nieuwenhuijzen, Karin J H; Lette, Walter; Schipper, Dik J; Ten Elshof, Johan E

    2016-03-23

    One of the main trends in the past decades is the reduction of wastage and the replacement of toxic compounds in industrial processes. Some soft metallic particles can be used as nontoxic solid lubricants in high-temperature processes. The behavior of bismuth metal particles, bismuth sulfide (Bi2S3), bismuth sulfate (Bi2(SO4)3), and bismuth oxide (Bi2O3) as powder lubricants was studied in a range of temperatures up to 580 °C. The mechanical behavior was examined using a high-temperature pin-on-disc setup, with which the friction force between two flat-contact surfaces was recorded. The bismuth-lubricated surfaces showed low coefficients of friction (μ ≈ 0.08) below 200 °C. Above the melting temperature of the metal powder at 271 °C, a layer of bismuth oxide developed and the friction coefficient increased. Bismuth oxide showed higher friction coefficients at all temperatures. Bismuth sulfide exhibited partial oxidation upon heating but the friction coefficient decreased to μ ≈ 0.15 above 500 °C, with the formation of bismuth oxide-sulfate, while some bismuth sulfate remained. All surfaces were studied by X-ray diffraction (XRD), confocal microscopy, high-resolution scanning electron microscopy (HR-SEM), and energy-dispersive X-ray spectroscopy (EDS). This study reveals how the partial oxidation of bismuth compounds at high temperatures affects their lubrication properties, depending on the nature of the bismuth compound.

  6. New approach to the readout system for a very large bismuth germanate calorimeter

    International Nuclear Information System (INIS)

    Sumner, R.

    1982-01-01

    This note presents a possible solution to the problem of data acquisition and control for a very large array of BGO crystals. The array is a total energy calorimeter, which is a part of a detector being designed for LEPC. After a brief description of the environment, we present a working definition of the calorimeter, followed by a statement of the desirable characteristics of the readout system. After a discussion of some alternatives, a complete system is described

  7. Real Time Corrosion Monitoring in Lead and Lead-Bismuth Systems

    Energy Technology Data Exchange (ETDEWEB)

    James F. Stubbins; Alan Bolind; Ziang Chen

    2010-02-25

    The objective of this research program is to develop a real-time, in situ corrosion monitoring technique for flowing liquid Pb and eutectic PbBi (LBE) systems in a temperature range of 400 to 650 C. These conditions are relevant to future liquid metal cooled fast reactor operating parameters. THis program was aligned with the Gen IV Reactor initiative to develp technologies to support the design and opertion of a Pb or LBE-cooled fast reactor. The ability to monitor corrosion for protection of structural components is a high priority issue for the safe and prolonged operation of advanced liquid metal fast reactor systems. In those systems, protective oxide layers are intentionally formed and maintained to limit corrosion rates during operation. This program developed a real time, in situ corrosion monitoring tecnique using impedance spectroscopy (IS) technology.

  8. Slurry feed variability in West Valley's melter feed tank and sampling system

    International Nuclear Information System (INIS)

    Fow, C.L.; Kurath, D.E.; Pulsipher, B.A.; Bauer, B.P.

    1989-04-01

    The present plan for disposal of high-level wastes at West Valley is to vitrify the wastes for disposal in deep geologic repository. The vitrification process involves mixing the high-level wastes with glass-forming chemicals and feeding the resulting slurry to a liquid-fed ceramic melter. Maintaining the quality of the glass product and proficient melter operation depends on the ability of the melter feed system to produce and maintain a homogeneous mixture of waste and glass-former materials. To investigate the mixing properties of the melter feed preparation system at West Valley, a statistically designed experiment was conducted using synthetic melter feed slurry over a range of concentrations. On the basis of the statistical data analysis, it was found that (1) a homogeneous slurry is produced in the melter feed tank, (2) the liquid-sampling system provides slurry samples that are statistically different from the slurry in the tank, and (3) analytical measurements are the major source of variability. A statistical quality control program for the analytical laboratory and a characterization test of the actual sampling system is recommended. 1 ref., 5 figs., 1 tab

  9. Innovated feed water distributing system of VVER steam generators

    International Nuclear Information System (INIS)

    Matal, O.; Sousek, P.; Simo, T.; Lehota, M.; Lipka, J.; Slugen, V.

    2000-01-01

    Defects in feed water distributing system due to corrosion-erosion effects have been observed at many VVER 440 steam generators (SG). Therefore analysis of defects origin and consequently design development and testing of a new feed water distributing system were performed. System tests in-situ supported by calculations and comparison of measured and calculated data were focused on demonstration of long term reliable operation, definition of water flow and water chemical characteristics at the SG secondary side and their measurements and study of dynamic characteristics needed for the innovated feed water distributing system seismic features approval. The innovated feed water distributing system was installed in the SGs of two VVER units already. (author)

  10. An Antenna Measurement System Based on Optical Feeding

    Directory of Open Access Journals (Sweden)

    Ryohei Hosono

    2013-01-01

    the advantage of the system is demonstrated by measuring an ultra-wideband (UWB antenna both by the optical and electrical feeding systems and comparing with a calculated result. Ripples in radiation pattern due to the electrical feeding are successfully suppressed by the optical feeding. For example, in a radiation measurement on the azimuth plane at 3 GHz, ripple amplitude of 1.0 dB that appeared in the electrical feeding is reduced to 0.3 dB. In addition, a circularly polarized (CP antenna is successfully measured by the proposed system to show that the system is available not only for amplitude but also phase measurements.

  11. Adaptive Venturi for Monopropellant Feed Systems, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. proposes to develop a unique venturi for future monopropellant feed systems that uses a passively controlled throat area to adjust propellant...

  12. Development of lead-bismuth coolant technology for nuclear device

    International Nuclear Information System (INIS)

    Kamata, Kin-ya; Kitano, Teruaki; Ono, Mikinori

    2004-01-01

    Liquid lead-bismuth is a promising material as a future fast reactor coolant or an intensive neutron source material for accelerator driven transmutation system (ADS). To develop nuclear plants and their installations using lead-bismuth coolant for practical use, both coolant technologies, inhabitation process of steels and quality control of coolant, and total operation system for liquid lead-bismuth plants are required. Based on the experience of liquid metal coolant, Mitsui Engineering and Shipbuilding Co., Ltd. (MES) has completed the liquid lead-bismuth forced circulation loop and has acquired various engineering data on main components including economizer. As a result of tis operation, MES has developed key technologies of lead-bismuth coolant such as controlling of oxygen content in lead-bismuth and a purification of lead-bismuth coolant. MES participated in the national project, ''The Development of Accelerator Driven Transmutation System'', together with JAERI (Japan Atomic Energy Research Institute) and started corrosion test for beam window of ADS. (author)

  13. Ruminant feeding systems in Southeast Asia

    International Nuclear Information System (INIS)

    Jalaludin, S.

    1989-01-01

    Ruminant production in Southeast Asia is not a very large industry but has the potential for expansion because there is an adequate feed supply of conventional and non-conventional types. Grazing ruminants on permanent pasture and wasteland is the most common method of animal management practised by small scale farmers. Programmes to improve pasture in the grazing resources should be implemented. Introducing ruminants into plantations is a viable proposition. Further increases in ruminant productivity can be attained if the technology on utilizing crop residues and by-products can be transferred to farmers and applied more widely. (author). 39 refs, 11 tabs

  14. Automatic feed system for ultrasonic machining

    Science.gov (United States)

    Calkins, Noel C.

    1994-01-01

    Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.

  15. Capacity of milk composition to identify the feeding system used to feed dairy cows.

    Science.gov (United States)

    Vicente, Fernando; Santiago, Carme; Jiménez-Calderón, José D; Martínez-Fernández, Adela

    2017-08-01

    This Research Paper addresses the hypothesis that is possible to identify the type of feed used for dairy cows by means of the analysis of milk composition and the fatty acid profile of milk fat. Sixteen dairy farms were monitored during 1 year with quarterly visits between summer 2014 and spring 2015. Rations varied throughout the year due to annual dynamic change of forage production, forage rotation, variation of nutrient requirements according to physiological state of the animal, etc. The ingredients of the rations were analysed by cluster identifying five feeding systems based on the main ingredient of the diet: grazing, maize silage, grass silage, dry forage and concentrate. Milk composition could explain up to 91·3% of the total variability among feeding systems, while fatty acid profile could explain only up to 61·2% of total variability. However, when the sum of types of fatty acids and their ratios are taken, up to 93·5% of total variability could be explained. The maize silage system had the greatest milk yield, protein, solid non-fat and urea proportions, as well as the highest proportion of saturated fatty acid and lowest concentration of trans11 18 : 1, cis9 18 : 1 and 18 : 3 n3. Principal component analysis distinguishes the maize silage system from other feeding systems, both from milk composition and milk fatty acid profile. Concentrate system overlapped partially with the grazing, grass silage and dry forage systems. The latter systems had the highest concentrations of cis9 18 : 1, trans11 18 : 1 and 18 : 3, but there was no clear differentiation among them.

  16. Low-head feeding system for thin section castings

    Science.gov (United States)

    Daniel, Sabah S.; Kleeb, Thomas R.; Lewis, Thomas W.; McDermott, John F.; Ozgu, Mustafa R.; Padfield, Ralph C.; Rego, Donovan N.; Vassilicos, Achilles

    1990-01-01

    A feed system is provided for conveying molten metal to a thin section caster having mold surfaces moving exclusively in the direction of casting. The feed system has a passage of circular cross section adjacent to one end thereof for receiving molten metal and a rectangular cross section at the delivery end thereof adjacent to the caster. The feed system is designed for supplying molten metal to the caster at low pressure for "closed-pool" type caster operation. The point of highest elevation in the metal flow passage of the feed system is on the upper surface of a transition portion where the cross section changes from circular to rectangular adjacent to the nozzle. The level or height of the high point above the centerline of the nozzle exit is selected so as to be less than the pressure of the metal measured in inches at the nozzle exit. This feature enables the maintenance of positive pressure in the metal within the feed system so that ingress of air into the metal is prevented.

  17. Harmonic-Resonance Analysis in a Maglev Feeding System

    Science.gov (United States)

    Shigeeda, Hidenori; Okui, Akinobu; Akagi, Hirofumi

    A feeding circuit for a superconducting magnetic levitation train system, or the so-called “maglev” consists of feeder cables and armature coils which show characteristics of a distributed-parameter line. Electric power is supplied to the cables and coils by PWM inverters whose output voltage contains a large amount of harmonics. As a result, a harmonic resonance may occur in the feeding circuit. Besides the above characteristics, the connecting point of sections (groups of armature coils) or the feeder cables length changes according to the movement of a maglev train, thus causing changes in the harmonic-resonance characteristics of the feeding circuit. This paper describes analytical results of the harmonic resonance in the feeding circuit for the maglev, with the focus on changes in the connecting point of sections and the feeder cables length.

  18. Feeding Dar es Salaam: a symbiotic food system perspective

    NARCIS (Netherlands)

    Wegerif, Marc C.A.

    2017-01-01

    This thesis is a sociological analysis of the agri-food system that feeds most of the over four and a half million residents of the fast-growing city of Dar es Salaam in Tanzania. It is based on qualitative research that has generated a picture of the food system that supplies the important foods

  19. THORIUM DISPERSION IN BISMUTH

    Science.gov (United States)

    Bryner, J.S.

    1961-07-01

    The growth of thorium bismutaide particles, which are formed when thorium is suspended in liquid bismuth, is inhibited when the liquid metal suspension is being flowed through a reactor and through a heat exchanger in sequence. It involves the addition of as little as 1 part by weight of tellurium to 100 parts of thorium. This addition is sufficient to inhibit particle growth and agglomeration.

  20. Analysis of Complex Valve and Feed Systems

    Science.gov (United States)

    Ahuja, Vineet; Hosangadi, Ashvin; Shipman, Jeremy; Cavallo, Peter; Dash, Sanford

    2007-01-01

    A numerical framework for analysis of complex valve systems supports testing of propulsive systems by simulating key valve and control system components in the test loop. In particular, it is designed to enhance the analysis capability in terms of identifying system transients and quantifying the valve response to these transients. This system has analysis capability for simulating valve motion in complex systems operating in diverse flow regimes ranging from compressible gases to cryogenic liquids. A key feature is the hybrid, unstructured framework with sub-models for grid movement and phase change including cryogenic cavitations. The multi-element unstructured framework offers improved predictions of valve performance characteristics under steady conditions for structurally complex valves such as pressure regulator valve. Unsteady simulations of valve motion using this computational approach have been carried out for various valves in operation at Stennis Space Center such as the split-body valve and the 10-in. (approx.25.4-cm) LOX (liquid oxygen) valve and the 4-in. (approx.10 cm) Y-pattern valve (liquid nitrogen). Such simulations make use of variable grid topologies, thereby permitting solution accuracy and resolving important flow physics in the seat region of the moving valve. An advantage to this software includes possible reduction in testing costs incurred due to disruptions relating to unexpected flow transients or functioning of valve/flow control systems. Prediction of the flow anomalies leading to system vibrations, flow resonance, and valve stall can help in valve scheduling and significantly reduce the need for activation tests. This framework has been evaluated for its ability to predict performance metrics like flow coefficient for cavitating venturis and valve coefficient curves, and could be a valuable tool in predicting and understanding anomalous behavior of system components at rocket propulsion testing and design sites.

  1. Pose Planning for the Feed Support System of FAST

    Directory of Open Access Journals (Sweden)

    Rui Yao

    2014-01-01

    Full Text Available A six-cable driven parallel manipulator and an A-B rotator in the feed support system of the Five-hundred-meter Aperture Spherical radio Telescope (FAST are adopted for realizing the position and pose of nine feeds. The six-cable driven parallel manipulator is a flexible mechanism, which may not be stably controlled due to a small cable tension. The A-B rotator is a rigid mechanism, and its stability and accuracy can be improved by small pose angle. Based on the different characteristics, a pose planning function is presented. The optimization target of the pose planning function is to get the smallest pose angle of the A-B rotator, and the constraint condition can reflect the controllability of the six-cable driven parallel manipulator. Then, the pose planning realization process of the feed support system is proposed. Based on the pose planning method, optimized pose angles of the feed support system for the nine feeds are obtained, which suggests that the pose angle of the six-cable driven parallel manipulator changes from 0° to 14° and the pose angle of the A-B rotator changes from 0° to 26.4°.

  2. Tribochemistry of Bismuth and Bismuth Salts for Solid Lubrication

    NARCIS (Netherlands)

    Gonzalez Rodriguez, P.; van den Nieuwenhuijzen, Karin Jacqueline Huberta; Lette, W.; Schipper, Dirk J.; ten Elshof, Johan E.

    2016-01-01

    One of the main trends in the past decades is the reduction of wastage and the replacement of toxic compounds in industrial processes. Some soft metallic particles can be used as nontoxic solid lubricants in high-temperature processes. The behavior of bismuth metal particles, bismuth sulfide

  3. Liquid over-feeding air conditioning system and method

    Science.gov (United States)

    Mei, V.C.; Chen, F.C.

    1993-09-21

    A refrigeration air conditioning system utilizing a liquid over-feeding operation is described. A liquid refrigerant accumulator-heat exchanger is placed in the system to provide a heat exchange relationship between hot liquid refrigerant discharged from condenser and a relatively cool mixture of liquid and vaporous refrigerant discharged from the evaporator. This heat exchange relationship substantially sub-cools the hot liquid refrigerant which undergoes little or no evaporation across the expansion device and provides a liquid over-feeding operation through the evaporator for effectively using 100 percent of evaporator for cooling purposes and for providing the aforementioned mixture of liquid and vaporous refrigerant. 1 figure.

  4. A Self-powered Field Feeding System

    National Research Council Canada - National Science Library

    Pickard, Don; DiLeo, Frank; Kushch, Aleksandr; Hauerbach, Markvard; LeVine, Lawrence

    2006-01-01

    .... A conventional Tray Ration Heater (TRH) powered by the HMMWV, was redesigned to include a thermoelectric generator, a low power consumption DC burner, and a newly designed Power Management System (POMS...

  5. Behavioral pattern of Rohilkhandi kids under different feeding systems

    Directory of Open Access Journals (Sweden)

    Anjali Kumari

    2016-07-01

    Full Text Available Aim: The present study designed to evaluate the effect of different feeding systems on the behavior of local Rohilkhandi kids. Materials and Methods: A total of 21 growing goats (local goat of Rohilkhand region, weighing around 7-11 kg and aging 4-5 months, were used. These animals were kept in three groups. Group I was fed un-chopped green fodder in circular feeder (newly designed. Group II was fed un-chopped green fodder in linear feeder that was similar to the existing farm practice. Group III was fed chopped green fodder in linear feeder (modified version. Amount of concentrate and dry fodder fed was kept constant for all the three groups subject to equal increment in accordance with their increasing age. Adlibitum green fodder was made available to the animals. The experiment was conducted for 3 months. On-going behavior was recorded each day 4 h (2 h in the morning from 9:00 am to 11:00 am, after offering the feed, and same was repeated for 2 h in the afternoon, i.e., from 2:00 pm to 4:00 pm was made between 9 am and 5 pm. The individual behaviors, viz., feeding, drinking, lying down, ruminating, idling, butting, pressing, pushing, frontal clashing, and physical displacement at feed barrier (active and passive: Without physical contact of the goat were recorded using time-sampling method. Further, incidental activities such as defecation and urination were also recorded. Results: Among all the groups, butting, head to head, and pushing were the common agonistic behavior found but values did not differ significantly. The pushing while feeding was relatively less in Group II (0.22±0.04 min which differed significantly (p<0.05 from the other two groups. The idling time was found significantly (p<0.05 lower in Group II (1.68±0.21 as compared to Group I (4.67±0.52 and Group III (4.27±0.56. Time spent in rumination near the feeding trough as well as away from the feeding trough was also significantly higher in Group I (p<0.05 than the other

  6. Adaptive feed forward in the LANL RF control system

    International Nuclear Information System (INIS)

    Ziomek, C.D.

    1992-01-01

    This paper describes an adaptive feed forward system that corrects repetitive errors in the amplitude and phase of the RF field of a pulsed accelerator. High-frequency disturbances that are beyond the effective bandwidth of the RF-field feedback control system can be eliminated with a feed forward system. Many RF-field disturbances for a pulsed accelerator are repetitive, occurring at the same relative time in every pulse. This design employs digital signal processing hardware to adaptively determine and track the control signals required to eliminate the repetitive errors in the feedback control system. In order to provide the necessary high-frequency response, the adaptive feed forward hardware provides the calculated control signal prior to the repetitive disturbance that it corrects. This system has been demonstrated to reduce the transient disturbances caused by beam pulses. Furthermore, it has been shown to negate high-frequency phase and amplitude oscillations in a high-power klystron amplifier caused by PFN ripple on the high-voltage. The design and results of the adaptive feed forward system are presented. (Author) 3 figs., 2 refs

  7. Feeding Our Immune System: Impact on Metabolism

    Directory of Open Access Journals (Sweden)

    Isabelle Wolowczuk

    2008-01-01

    Full Text Available Endogenous intestinal microflora and environmental factors, such as diet, play a central role in immune homeostasis and reactivity. In addition, microflora and diet both influence body weight and insulin-resistance, notably through an action on adipose cells. Moreover, it is known since a long time that any disturbance in metabolism, like obesity, is associated with immune alteration, for example, inflammation. The purpose of this review is to provide an update on how nutrients-derived factors (mostly focusing on fatty acids and glucose impact the innate and acquired immune systems, including the gut immune system and its associated bacterial flora. We will try to show the reader how the highly energy-demanding immune cells use glucose as a main source of fuel in a way similar to that of insulin-responsive adipose tissue and how Toll-like receptors (TLRs of the innate immune system, which are found on immune cells, intestinal cells, and adipocytes, are presently viewed as essential actors in the complex balance ensuring bodily immune and metabolic health. Understanding more about these links will surely help to study and understand in a more fundamental way the common observation that eating healthy will keep you and your immune system healthy.

  8. Microwave Feeding System Devices Of Linear Collider

    CERN Document Server

    Bogdanovich, B Yu; Kaminsky, V I; Lalayan, M V; Sobenin, N P; Zavadtsev, D A

    2004-01-01

    The simulations, manufacturing and experimental results for two devices of linear collider RF power distribution system are presented. One of these devices is magic tee with movable choke plungers in E- and H-arms for the tuning the coupling-factor and RF phase of highpower accelerating cavities. The QEXT

  9. Direct methanol feed fuel cell and system

    Science.gov (United States)

    Surampudi, Subbarao (Inventor); Frank, Harvey A. (Inventor); Narayanan, Sekharipuram R. (Inventor); Chun, William (Inventor); Jeffries-Nakamura, Barbara (Inventor); Kindler, Andrew (Inventor); Halpert, Gerald (Inventor)

    2009-01-01

    Improvements to non acid methanol fuel cells include new formulations for materials. The platinum and ruthenium are more exactly mixed together. Different materials are substituted for these materials. The backing material for the fuel cell electrode is specially treated to improve its characteristics. A special sputtered electrode is formed which is extremely porous. The fuel cell system also comprises a fuel supplying part including a meter which meters an amount of fuel which is used by the fuel cell, and controls the supply of fuel based on said metering.

  10. Effects tethering feeding management system on carcass, organ ...

    African Journals Online (AJOL)

    The albumin, globulin and cholesterol values did not vary significantly (p< 0.05) between the treatment groups. The results of this study showed that periodic tethering feeding management system was not detrimental to the carcass, organ weight characteristics and serum metabolites of growing West African dwarf goats.

  11. Suitable feeding systems for fat lamb production | Reyneke | South ...

    African Journals Online (AJOL)

    South African Journal of Animal Science. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 1, No 1 (1971) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Suitable feeding systems for fat lamb production.

  12. Feed gas contaminant control in ion transport membrane systems

    Science.gov (United States)

    Carolan, Michael Francis [Allentown, PA; Minford, Eric [Laurys Station, PA; Waldron, William Emil [Whitehall, PA

    2009-07-07

    Ion transport membrane oxidation system comprising an enclosure having an interior and an interior surface, inlet piping having an internal surface and adapted to introduce a heated feed gas into the interior of the enclosure, and outlet piping adapted to withdraw a product gas from the interior of the enclosure; one or more planar ion transport membrane modules disposed in the interior of the enclosure, each membrane module comprising mixed metal oxide material; and a preheater adapted to heat a feed gas to provide the heated feed gas to the inlet piping, wherein the preheater comprises an interior surface. Any of the interior surfaces of the enclosure, the inlet piping, and the preheater may be lined with a copper-containing metal lining. Alternatively, any of the interior surfaces of the inlet piping and the preheater may be lined with a copper-containing metal lining and the enclosure may comprise copper.

  13. Feed type based expert systems in mineral processing plants

    International Nuclear Information System (INIS)

    Jamsa-Jounela, S.-L.; Laine, S.; Laurila, H.

    1999-01-01

    Artificial Intelligence includes excellent tools for the control and supervision of industrial processes. Several thousand industrial applications have been reported worldwide. Recently, the designers of the AI systems have begun to hybridize the intelligent techniques, expert systems, fuzzy logic and neural networks, to enhance the capability of the AI systems. Expert systems have proved to be ideal candidates especially for the control of mineral processes. As successful case projects, expert system based on on-line classification of the feed type is described in this paper. The essential feature of this expert system is the classification of different feed types and their distinct control strategies at the plant. In addition to the classification, the expert system has a database containing information about how to handle the determined feed type. This self-learning database scans historical process data to suggest the best treatment for the ore type under processing. The system has been tested in two concentrators, the Outokumpu Finnmines Oy, Hitura mine and Outokumpu Chrome Oy, Kemi mine. (author)

  14. Effect of creep feeding system on performance of suckling lambs

    International Nuclear Information System (INIS)

    Saleh S, A.; Saleh, H.M.

    2002-01-01

    Twenty seven newly born Barki Lambs of about 3.84 kg live body weight were randomly divided into three groups of nine lambs each. Their weights were recorded at birth. Lambs in the first group were served as controls and fed on their dam's milk only (milk basis) > The second group was fed on their dam's milk in addition to concentrate feed mixture (CFM) as creep feeding> Group three was fed on their dam's milk; concentrate feed mixture and lactic acid producing bacteria. Concentrate feed mixture was offered daily in the morning for lambs under creep feeding system, started at 7 days from birth. Lambs were kept with their mothers in the same pens. Blood samples were collected at 7.30 and 60 days old from the jugular vein of each animal. Total gain, average daily gain and weaning weight of lambs were higher (P<0.05) in groups II and III than control group. Both groups II and III showed no significant difference in weight gain. The higher values serum total proteins were recorded in groups II and III. Values of serum total proteins were recorded in groups II and III . Values of serum albumin were similar in all different groups. However, group III recorded the highest values of globin. Blood serum glutamic pyruvic transaminase (GPT) and glutamic oxalacetic transaminase (GOT) activities were not affected by treatment. It was clearly observed that GPT values were increased with age in all groups. Values for serum glucose were decreased with age until weaning, while serum urea nitrogen was increased with age. The differences among treatments in creatinine concentrations were not significant. Total triiodothyronine (T4) and total thyroxine (T4) concentrations were not significantly different between experimental groups. It is concluded that creep feeding promotes growth in lambs during suckling period and can be successfully used for a short fattening period

  15. Systems genetics and genome-wide association approaches for analysis of feed intake, feed efficiency, and performance in beef cattle

    DEFF Research Database (Denmark)

    Santana, M. H. A.; Freua, M. C.; Do, D. N.

    2016-01-01

    Feed intake, feed efficiency, and weight gain are important economic traits of beef cattle in feed lots. In the present study, we investigated the physiological processes underlying such traits from the point of view of systems genetics. Firstly, using data from 1334 Nellore (Bos indicus) cattle......, were annotated and the biological processes underlying the traits were inferred from Database for Annotation, Visualization and Integrated Discovery (DAVID) and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases. Our results indicated several putative genomic regions associated with the target...... genetics approach used in this study revealed novel pathways related to feed efficiency traits in beef cattle....

  16. Modified Atmosphere Packaging and Its Feasibility for Military Feeding Systems

    Science.gov (United States)

    1994-12-01

    effectively increases the lag phase and generation time of microbes and is responsible for inhibiting spoilage bacterial growth [24]. Carbon dioxide has a...mishandling at any point in production can make it unsafe for consumption. Cwnmon food spoilage microbes give off putrid odors and that is an indication that...the shelf life extension of several foods , and their feasibility for military feeding systems. Several trials were conducted on packaging food

  17. Molten metal feed system controlled with a traveling magnetic field

    International Nuclear Information System (INIS)

    Praeg, W.F.

    1991-01-01

    This patent describes a continuous metal casting system in which the feed of molten metal controlled by means of a linear induction motor capable of producing a magnetic traveling wave in a duct that connects a reservoir of molten metal to a caster. The linear induction motor produces a traveling magnetic wave in the duct in opposition to the pressure exerted by the head of molten metal in the reservoir

  18. Advisory group meeting on design and performance of reactor and subcritical blanket systems with lead and lead-bismuth as coolant and/or target material. Working material

    International Nuclear Information System (INIS)

    2001-01-01

    The purpose of the IAEA Advisory Group Meeting (AGM) on Design and Performance of Reactor and Sub-critical Blanket Systems with Lead and Lead-Bismuth as Coolant and/or Target Material was to provide a forum for international information exchange on all the topics relevant to Pb and Pb/Bi cooled critical and sub-critical reactors. In addition, the AGM aimed at: (1) finding ways and means to improve international co-ordination efforts in this area; (2) obtaining advice from the Member States with regard to the activities to be implemented in this area by the IAEA, in order to best meet their needs; and (3) laying out the plans for an effective co-ordination and support of the R and D activities in this area. The AGM stressed that nuclear energy is a realistic solution to satisfy the energy demand, considering the limited resources of fossil fuel, its uneven distribution in the world and the impact of its use on the planet, and taking into account the expected doubling of the world population in the 21st century and tripling of the electricity demand (especially in the developing countries). However, the AGM concluded that the development of an innovative nuclear technology meeting the following requirements must be pursued: (a) deterministic exclusion of any severe accident; (b) proliferation resistance; (c) cost competitiveness with alternative energy sources; (d) sustainable fuel supply; and (e) solution of the radioactive waste management problem

  19. Study of bismuth molybdenum oxidic catalysts for methanol oxidation to formaldehyde

    International Nuclear Information System (INIS)

    Khokhler, R.Ya.; Kurina, L.N.; Kudrina, N.V.

    1982-01-01

    Phase composition and catalytic properties of bismuth molybdenum oxidic system in reaction of methanol oxidation are studied at temperature of 280-350 deg. Increase of selectivity according to formaldehyde is connected with formation of MoO 3 solid solution in bismuth molybdate Bi 2 O 3 x3MoO 3

  20. An automated flow system incorporating in-line acid dissolution of bismuth metal from a cyclotron irradiated target assembly for use in the isolation of astatine-211

    Energy Technology Data Exchange (ETDEWEB)

    O’Hara, Matthew J.; Krzysko, Anthony J.; Niver, Cynthia M.; Morrison, Samuel S.; Owsley, Stanley L.; Hamlin, Donald K.; Dorman, Eric F.; Scott Wilbur, D.

    2017-04-01

    Astatine-211 (211At) is a promising cyclotron-produced radionuclide being investigated for use in targeted alpha therapy of blood borne and metastatic cancers, as well as treatment of tumor remnants after surgical resections. The isolation of trace quantities of 211At, produced within several grams of a Bi metal cyclotron target, involves a complex, multi-step procedure: (1) Bi metal dissolution in strong HNO3, (2) distillation of the HNO3 to yield Bi salts containing 211At, (3) dissolution of the salts in strong HCl, (4) solvent extraction of 211At from bismuth salts with diisopropyl ether (DIPE), and (5) back-extraction of 211At from DIPE into NaOH, leading to a purified 211At product. Step (1) has been addressed first to begin the process of automating the onerous 211At isolation process. A computer-controlled Bi target dissolution system has been designed. The system performs in-line dissolution of Bi metal from the target assembly using an enclosed target dissolution block, routing the resulting solubilized 211At/Bi mixture to the subsequent process step. The primary parameters involved in Bi metal solubilization (HNO3 concentration and influent flow rate) were optimized prior to evaluation of the system performance on replicate cyclotron irradiated targets. The results indicate that the system performs reproducibly, having nearly quantitative release of 211At from irradiated targets, with cumulative 211At recoveries that follow a sigmoidal function. The predictable nature of the 211At release profile allows the user to tune the system to meet target processing requirements.

  1. Liquid Bismuth Propellant Flow Sensor

    Science.gov (United States)

    Polzin, Kurt A.; Stanojev, B. J.; Korman, V.

    2007-01-01

    Quantifying the propellant mass flow rate in liquid bismuth-fed electric propulsion systems has two challenging facets. First, the flow sensors must be capable of providing a resolvable measurement at propellant mass flow rates on the order of 10 mg/see with and uncertainty of less that 5%. The second challenge has to do with the fact that the materials from which the flow sensors are fabricated must be capable of resisting any of the corrosive effects associated with the high-temperature propellant. The measurement itself is necessary in order to properly assess the performance (thrust efficiency, Isp) of thruster systems in the laboratory environment. The hotspot sensor[I] has been designed to provide the bismuth propellant mass flow rate measurement. In the hotspot sensor, a pulse of thermal energy (derived from a current pulse and associated joule heating) is applied near the inlet of the sensor. The flow is "tagged" with a thermal feature that is convected downstream by the flowing liquid metal. Downstream, a temperature measurement is performed to detect a "ripple" in the local temperature associated with the passing "hotspot" in the propellant. By measuring the time between the upstream generation and downstream detection of the thermal feature, the flow speed can be calculated using a "time of flight" analysis. In addition, the system can be calibrated by measuring the accumulated mass exiting the system as a-function of time and correlating this with the time it takes the hotspot to convect through the sensor. The primary advantage of this technique is that it doesn't depend on an absolute measurement of temperature but, instead, relies on the observation of thermal features. This makes the technique insensitive to other externally generated thermal fluctuations. In this paper, we describe experiments performed using the hotspot flow sensor aimed at quantifying the resolution of the sensor technology. Propellant is expelled onto an electronic scale to

  2. Process development work plan for waste feed delivery system

    International Nuclear Information System (INIS)

    Papp, I.G.

    1998-01-01

    This work plan defines the process used to develop project definition for Waste Feed Delivery (WFD). Project definition provides the direction for development of definitive design media required for the ultimate implementation of operational processing hardware and software. Outlines for the major deliverables are attached as appendices. The implementation of hardware and software will accommodate requirements for safe retrieval and delivery of waste currently stored in Hanford's underground storage tanks. Operations and maintenance ensure the availability of systems, structures, and components for current and future planned operations within the boundary of the Tank Waste Remediation System (TWRS) authorization basis

  3. Alternatives generation and analysis for phase I intermediate waste feed staging system design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Britton, M.D.

    1996-10-02

    This document provides; a decision analysis summary; problem statement; constraints, requirements, and assumptions; decision criteria; intermediate waste feed staging system options and alternatives generation and screening; intermediate waste feed staging system design concepts; intermediate waste feed staging system alternative evaluation and analysis; and open issues and actions.

  4. Design and performance of feed-delivery systems for simulated radioactive waste slurries

    International Nuclear Information System (INIS)

    Perez, J.M. Jr.

    1983-02-01

    Processes for vitrifying simulated high-level radioactive waste have been developed at the Pacific Northwest Laboratory (PNL) over the last several years. Paralleling this effort, several feed systems used to deliver the simulated waste slurry to the melter have been tested. Because there had been little industrial experience in delivering abrasive slurries at feed rates of less than 10 L/min, early experience helped direct the design of more-dependable systems. Also, as feed delivery requirements changed, the feed system was modified to meet these new requirements. The various feed systems discussed in this document are part of this evolutionary process, so they have not been ranked against each other. The four slurry feed systems discussed are: (1) vertical-cantilevered centrifugal pump system; (2) airlift feed systems; (3) pressurized-loop systems; and (4) positive-displacement pump system. 20 figures, 11 tables

  5. Updating the Cornell Net Carbohydrate and Protein System feed library and analyzing model sensitivity to feed inputs.

    Science.gov (United States)

    Higgs, R J; Chase, L E; Ross, D A; Van Amburgh, M E

    2015-09-01

    The Cornell Net Carbohydrate and Protein System (CNCPS) is a nutritional model that evaluates the environmental and nutritional resources available in an animal production system and enables the formulation of diets that closely match the predicted animal requirements. The model includes a library of approximately 800 different ingredients that provide the platform for describing the chemical composition of the diet to be formulated. Each feed in the feed library was evaluated against data from 2 commercial laboratories and updated when required to enable more precise predictions of dietary energy and protein supply. A multistep approach was developed to predict uncertain values using linear regression, matrix regression, and optimization. The approach provided an efficient and repeatable way of evaluating and refining the composition of a large number of different feeds against commercially generated data similar to that used by CNCPS users on a daily basis. The protein A fraction in the CNCPS, formerly classified as nonprotein nitrogen, was reclassified to ammonia for ease and availability of analysis and to provide a better prediction of the contribution of metabolizable protein from free AA and small peptides. Amino acid profiles were updated using contemporary data sets and now represent the profile of AA in the whole feed rather than the insoluble residue. Model sensitivity to variation in feed library inputs was investigated using Monte Carlo simulation. Results showed the prediction of metabolizable energy was most sensitive to variation in feed chemistry and fractionation, whereas predictions of metabolizable protein were most sensitive to variation in digestion rates. Regular laboratory analysis of samples taken on-farm remains the recommended approach to characterizing the chemical components of feeds in a ration. However, updates to the CNCPS feed library provide a database of ingredients that are consistent with current feed chemistry information and

  6. 21 CFR 73.1162 - Bismuth oxychloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bismuth oxychloride. 73.1162 Section 73.1162 Food... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1162 Bismuth oxychloride. (a) Identity. (1) The color additive bismuth oxychloride is a synthetically prepared white or nearly white amorphous or finely...

  7. 21 CFR 73.2162 - Bismuth oxychloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bismuth oxychloride. 73.2162 Section 73.2162 Food... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2162 Bismuth oxychloride. (a) Identity and specifications. (1) The color additive bismuth oxychloride shall conform in identity and specifications to the...

  8. Bismuth distribution in InSb/Bi epitaxial layers

    International Nuclear Information System (INIS)

    Lantsov, A.F.; Akchurin, R.Kh.; Zinov'ev, V.G.

    1981-01-01

    Bismuth distribution in epitaxial layers of InSb/Bi, prepared by liquid-phase epitaxy (LPE) on InSb sublayers, is studied. The solution-melt, crystallization is carried out from the compositions corresponded to the cross sections InSb-Bi, InSb-InBi and InSb-In 2 Bi of ternary system In-Sb-Bi and changed in the limits, determined by the state diagram liquidus in the temperature range from 220 to 450 deg C. The temperature dependence of the coefficients of bismuth distribution in epitaxial layers of InSb(Bi) is specified. The dependence of bismuth concentration on the composition of initial liquid phase is established [ru

  9. Bismuth bronze from machu picchu, peru.

    Science.gov (United States)

    Gordon, R B; Rutledge, J W

    1984-02-10

    The decorative bronze handle of a tumi excavated at the Inca city of Machu Picchu, Peru, contains 18 percent bismuth and appears to be the first known example of the use of bismuth with tin to make bronze. The alloy is not embrittled by the bismuth because the bismuth-rich constituent does not penetrate the grain boundaries of the matrix phase. The use of bismuth facilitates the duplex casting process by which the tumi was made and forms an alloy of unusual color.

  10. Feedback-controlled gas feed system for ion sources

    International Nuclear Information System (INIS)

    Tooker, J.F.; Burell, K.; Kamperschroer, J.

    1983-01-01

    The gas feed system, which supplies the gas to the ion sources used on the Doublet III neutral beam injectors was workable, as originally configured, but has a number of inconveniences and difficulties. A new gas system is being developed which is an adaptation of a system used in a variety of applications in tokamak experiments. For each ion source, the system is comprised of four valve assemblies and valve controllers, three for the ion source and one for the neutralizer. Each valve assembly consists of a length of submillimeter tubing, a pressure transducer, and a piezoelectric valve. A flow of 040 Torr-liter/s of hydrogen is achieved through a 400 cm length of 0.53 mm radius tubing. This tubing is plastic to provide the high voltage isolation between the high voltage of the ion source and the valve assemblies which are located at ground potential. The system is interfaced via one of the neutral beam computers and CAMAC to a console in the control room from where the flow is programmed. System description and adaptations will be presented. Performance of the system as operated and adjusted on the bench are presented

  11. Effect of feeding schedule on ammonia emission from individual and group housing systems for sows.

    NARCIS (Netherlands)

    Groenestein, C.M.; Hendriks, M.M.W.B.; Hartog, den L.A.

    2003-01-01

    The effect of feeding schedule on ammonia emission from housing,systems for sows was studied. The hypothesis was that changing the feeding schedule would change the diurnal pattern of the ammonia emission and that daytime feeding would cause more ammonia to be emitted from the manure compared to

  12. Performance of Layers Supplemented with Either Complete Feed or Diets in Cafeteria Feeding System Under Semi-scavenging Condition in a Tropical Environment

    OpenAIRE

    Das, Chamali; Roy, Bimol Chandra; Ranvig, Hans; Riise, Jens Christian; Chowdhury, Sachchidananda Das; Iwamoto, Hisao; Tabata, Shoji

    2008-01-01

    1. Egg production ability and its economical aspect were compared among the hens kept under semi-scavenging condition on two feeding systems with four supplementary levels. Commercial balanced feed and cafeteria feeding diet were fed the hens at 40 g, 60 g, 80 g and 120 g/day respectively. Cafeteria feeding diet was composed of 70% mixed feed (40% broken rice, 20% rice polish and 10% wheat bran), 27% soybean meal and 3% oyster shell. 2. The mean feed residue was 4-8 g/day in the hens fed 40...

  13. System Genetics and Transcriptomic of Feed Efficiency in Nordic Dairy Cattle

    DEFF Research Database (Denmark)

    Salleh, Suraya Binti Mohamad; Höglund, Johanna; Løvendahl, Peter

    Feed is the largest variable cost in milk production industries, thus improving feed efficiency will give better use of resources. This project works closely on definitions of feed efficiency in dairy cattle and uses advanced integrated genomics, bioinformatics and systems biology methods linking......-hydroxybutyrates (BHB), Triacylglyceride (TAG) and urea. Feed efficiency, namely Residual Feed Intake (RFI) and Kleiber Ratio (KR) based on daily feed or dry matter intake (DMI), body weight and milk production records also will be calculated. The bovine RNAseq gene expression data will be analyzed using statistical......-bioinformatics and systems biology approaches to identify a list of differentially expressed (DE) genes, co-expressed (CE) genes, differentially wired networks, co-expression, transcriptional regulatory networks and hub genes/biomarkers for feed efficiency. This study will provide molecular mechanisms of metabolic processes...

  14. Effects of feeding systems and breed of cattle on reproductive ...

    African Journals Online (AJOL)

    Mo

    and reproductive performances in smallholder dairy farms reflect low levels of feeding, which is due to limited cash flow related to the low risk-bearing capacity of smallholders. Membership to co-operative society is one way to improve smallholders' access to better quality feeds, possible through credit arrangements.

  15. Kinematics Analysis of End Effector for Carrier Robot of Feeding Broiler Chicken System

    Science.gov (United States)

    Syam, Rafiuddin; Arsyad, Hairul; Bauna, Ruslan; Renreng, Ilyas; Bakhri, Syaiful

    2018-02-01

    The demand for commodities, especially Broiler chicken farms are increasing, the volume of feed requirements Broiler chickens increased with age up to the age of 30-57 days required feed 3,829 grams/day/head, so if the chicken population is 3,000 needed transporting feed 11 487 kg/day, This research aims to produce a robot capable of transporting feed in the top of the cage by using a control system so as to make efficient use of manpower. Design robot performed using software design three-dimensional Solidworks2010, process of making the robot is started with the design manufacture three (3) units of mechanical systems (mechanical system for holder feed, mechanical systems for lifter feed and mechanical systems for transporting feed), then do the design process framework as a component buffer so that the mechanical system will work properly and safely when the robot operates. Furthermore, the manufacture of electronic circuits and control are using Arduino Mega microcontroller. After assembling all components mechanical systems and installation of electronic systems and control, then experiments to evaluate the performance of the robot have been made. The results of experiments showed that all components work well according to plan, in particular the speed and acceleration of end effector motion so it can hold and release the feed well. This strongly supports the robots perform tasks in accordance with the intent, i.e., holding, lifting and moving feed.

  16. Performance of parallel feed multiple effect evaporation system for seawater desalination

    Energy Technology Data Exchange (ETDEWEB)

    El-Dessouky, Hisham T.; Ettouney, Hisham M. [Kuwait Univ., Dept. of Chemical Engineering, Safat (Kuwait); Mandani, Faisal [College of Technological Studies, Shuwaikh (Kuwait)

    2000-12-01

    Performance analysis is presented for the parallel feed multiple effect evaporation system. Two operating modes are considered in the analysis, which includes the parallel and the parallel/cross flow systems. Analysis is performed as a function of the heating steam temperature, salinity of the intake seawater, and number of effects. Results are presented as a function of parameters controlling the unit product cost, which includes the specific heat transfer area, the thermal performance ratio, the conversion ratio, and the specific flow rate of the cooling water. Results indicate that better performance is obtained for the parallel/cross flow system. However, the parallel feed system has similar characteristics and simpler design and operation procedures. Performance of both systems is consistent with literature data. Comparison of the two parallel feed systems versus conventional multistage flash desalination and the forward feed multiple effect evaporation schemes show that the forward feed system has better performance characteristics than the other three systems. (Author)

  17. Aspects of the magmatic geochemistry of bismuth

    Science.gov (United States)

    Greenland, L.P.; Gottfried, D.; Campbell, E.Y.

    1973-01-01

    Bismuth has been determined in 74 rocks from a differentiated tholeiitic dolerite, two calc-alkaline batholith suites and in 66 mineral separates from one of the batholiths. Average bismuth contents, weighted for rock type, of the Great Lake (Tasmania) dolerite, the Southern California batholith and the Idaho batholith are, 32, 50 and 70 ppb respectively. All three bodies demonstrate an enrichment of bismuth in residual magmas with magmatic differentiation. Bismuth is greatly enriched (relative to the host rock) in the calcium-rich accessory minerals, apatite and sphene, but other mineral analyses show that a Bi-Ca association is of little significance to the magmatic geochemistry of bismuth. Most of the bismuth, in the Southern California batholith at least, occurs in a trace mineral phase (possibly sulfides) present as inclusions in the rock-forming minerals. ?? 1973.

  18. The effects of feeding commercial feed formulated for semi-intensive systems on Litopenaeus vannamei production and its profitability in a hyper-intensive biofloc-dominated system

    Directory of Open Access Journals (Sweden)

    André Braga

    2016-05-01

    Full Text Available The present study evaluated the production of Litopenaeus vannamei in a high density biofloc-dominated system using two commercial feeds; a less expensive feed (US$0.99 kg−1 formulated for semi-intensive systems and the more expensive (US$1.75 kg−1 which was designed for hyper-intensive systems. A 67-days study was conducted in six 40 m3 lined with Ethylene Propylene Diene Monomer membrane raceways (RWs filled with mixture of seawater (22 m3, and biofloc-rich water (18 m3. Each RW was stocked (500 shrimp m−3 using juveniles (2.66 g produced from Taura-Resistant and Fast-Growth breeding lines. The study was composed of two feed treatments with three replicates each; the cheaper feed (SI-35 contained 35% crude protein (CP, 7% lipid and 4% fiber while the more expensive one (HI-35 had the same levels of CP and lipid but only 2% fiber. The SI-35 treatment required more solids removal, oxygen, and bicarbonate supplementation than the HI-35 treatment. Weekly growth, total biomass, yield were significantly lower in the SI-35 treatment, whereas feed conversion ratio was higher. The economic analysis indicates that both feeds would be commercially viable, nevertheless, the less-expensive feed financially underperformed the other.

  19. Corrosion by liquid lead and lead-bismuth: experimental results review and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jinsuo [Los Alamos National Laboratory

    2008-01-01

    Liquid metal technologies for liquid lead and lead-bismuth alloy are under wide investigation and development for advanced nuclear energy systems and waste transmutation systems. Material corrosion is one of the main issues studied a lot recently in the development of the liquid metal technology. This study reviews corrosion by liquid lead and lead bismuth, including the corrosion mechanisms, corrosion inhibitor and the formation of the protective oxide layer. The available experimental data are analyzed by using a corrosion model in which the oxidation and scale removal are coupled. Based on the model, long-term behaviors of steels in liquid lead and lead-bismuth are predictable. This report provides information for the selection of structural materials for typical nuclear reactor coolant systems when selecting liquid lead or lead bismuth as heat transfer media.

  20. Iodine Gas Trapping using Granular Porous Bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jae Hwan; Shin, Jin Myeong; Park, Jang Jin; Park, Geun Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Yim, Mansung [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    {sup 129}I is a radionuclide with a very long half-life of 1.57 Χ 10{sup 7} years and has negative health effects to the human body. Therefore, the emission of {sup 129}I into the air is closely regulated by the Environmental Protection Agency (EPA). Many methods for trapping gaseous {sup 129}I have been developed thus far, including wet scrubbing and adsorption using silver loaded zeolites. Although wet scrubbing can effectively remove iodine, it suffers from corrosion of the vessel due to high concentration of the scrubbing solution. Silver loaded zeolites also show effectiveness in capturing {sup 129}I gas, yet weak thermal stability of physisorbed iodine remains a challenge. We studied a novel and facile method to trap iodine gas using bismuth. Granular bismuth having many pores was synthesized using bismuth nitrate and polyvinyl alcohol as a bismuth precursor and pore forming agent, respectively. Reaction of iodine and our samples resulted in an iodine capturing capacity of more than 2 times that of the commercial grade silver exchanged zeolite (AgX). Granular porous bismuths synthesized using bismuth nitrate and PVA show a promising performance in capturing iodine gas. The use of bismuth in trapping {sup 129}I gas can reduce the process cost as bismuth is cheap. Further study is going on to improve the mechanical property of granular porous bismuths for their easy handling.

  1. Recent advances in bioinorganic chemistry of bismuth.

    Science.gov (United States)

    Li, Hongyan; Sun, Hongzhe

    2012-04-01

    Bismuth has been used in medicine for over two centuries for the treatment of various diseases, in particular for gastrointestinal disorders, owing to its antimicrobial activity. Recent structural characterization of bismuth drugs provides an insight into assembly and pharmacokinetic pathway of the drugs. Mining potential protein targets inside the pathogen via metallomic/metalloproteomic approach and further characterization on the interactions of bismuth drugs with these targets laid foundation in understanding the mechanism of action of bismuth drugs. Such studies would be beneficial in rational design of new potential drugs. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. BISMUTH PHOSPHATE CARRIER PROCESS FOR Pu RECOVERY

    Science.gov (United States)

    Finzel, T.G.

    1959-02-01

    An improvement in the bismuth phosphate carrier precipitation process for recovering plutonium is described. It has been found that a more granular and more easily filterable carrier precipitiite is formed if the addition of the bismuth and phosphate ions is effected by first adding 9/10 of the bismuth ions necessary, then slowly adding all of the source of the phosphate ions to be incorporated in the precipitate, while digesting at 75 C and afterwards incorporating the remainder of the total bismuth ions necessary

  3. Hydrothermal synthesis of bismuth germanium oxide

    Science.gov (United States)

    Boyle, Timothy J.

    2016-12-13

    A method for the hydrothermal synthesis of bismuth germanium oxide comprises dissolving a bismuth precursor (e.g., bismuth nitrate pentahydrate) and a germanium precursor (e.g., germanium dioxide) in water and heating the aqueous solution to an elevated reaction temperature for a length of time sufficient to produce the eulytite phase of bismuth germanium oxide (E-BGO) with high yield. The E-BGO produced can be used as a scintillator material. For example, the air stability and radioluminescence response suggest that the E-BGO can be employed for medical applications.

  4. Bismuth absorption from sup 205 Bi-labelled pharmaceutical bismuth compounds used in the treatment of peptic ulcer disease

    Energy Technology Data Exchange (ETDEWEB)

    Dresow, B.; Fischer, R.; Gabbe, E.E.; Wendel, J.; Heinrich, H.C. (Eppendorf University Hospital, Hamburg (Germany))

    1992-04-01

    The absorption of bismuth from five {sup 205}Bi-labelled pharmaceutically used bismuth compounds was studied in man. From single oral doses of all compounds under investigation only <0.1% bismuth was absorbed and excreted with the urine. A significantly higher absorption was observed from the colloidal bismuth subcitrate and the basic bismuth gallate than from the basic bismuth salicylate, nitrate and aluminate. No retention of bismuth in the whole body was found from the single dose experiment. The biologic fast-term half-lives of absorbed bismuth were calculated to be 0.12 and 1.5 days. 14 refs., 2 figs., 1 tab.

  5. Ranitidine bismuth citrate: A review

    Directory of Open Access Journals (Sweden)

    N Chiba

    2001-01-01

    Full Text Available Recognition of the relationship between Helicobacter pylori infection and the development of gastroduodenal disease has increased greatly in recent years. To avoid complications of H pylori infection, such as the development of recurrent duodenal and gastric ulcers, effective therapies are required for eradication of the infection. This article reviews ranitidine bismuth citrate (RBC, a novel complex of ranitidine, bismuth and citrate, which was developed specifically for the purpose of eradicating H pylori. Dual therapy with RBC in combination with clarithromycin for 14 days yields eradication rates of 76%. Triple therapy bid for one week with a proton pump inhibitor, clarithromycin and either amoxicillin or a nitroimidazole (tinidazole or metronidazole is advocated as the treatment of choice for H pylori eradication. Analogous regimens with RBC in place of proton pump inhibitors show effective eradication rates in comparative studies and with pooled data. RBC, used alone or in combination with other antibiotics, appears to be a safe and effective drug for the treatment of H pylori infection. Bismuth levels do not appear to rise to toxic levels.

  6. The design of control system of livestock feeding processing

    Science.gov (United States)

    Sihombing, Juna; Napitupulu, Humala L.; Hidayati, Juliza

    2018-03-01

    PT. XYZ is a company that produces animal feed. One type of animal feed produced is 105 ISA P. In carrying out its production process, PT. XYZ faces the problem of rejected feed amounts during 2014 to June 2015 due to the amount of animal feed that exceeds the standard feed quality of 13% of moisture content and 3% for ash content. Therefore, the researchers analyzed the relationship between factors affecting the quality and extent of damage by using regression and correlation and determine the optimum value of each processing process. Analysis results found that variables affecting product quality are mixing time, steam conditioning temperature and cooling time. The most dominant variable affecting the product moisture content is mixing time with the correlation coefficient of (0.7959) and the most dominant variable affecting the ash content of the product during the processing is mixing time with the correlation coefficient of (0.8541). The design of the proposed product processing control is to run the product processing process with mixing time 235 seconds, steam conditioning temperature 87 0C and cooling time 192 seconds. Product quality 105 ISA P obtained by using this design is with 12.16% moisture content and ash content of 2.59%.

  7. Status and future application of pilot lead-bismuth target circuit TC-1 for ADS

    International Nuclear Information System (INIS)

    Ignatiev, S.; Leonchuk, M.; Orlov, Y.; Pankratov, D.; Reshetnikova, O.; Suvorov, G.; Zabudko, A.; Stepanov, V.; Klimov, N.; Hechanova, A.; Ma, J.; Li, N.; Gudowski, W.

    2007-01-01

    A complicated evolution, status and future application of the pilot molten lead-bismuth target circuit of 1 MW proton beam power (TC-1) as an important part of a target-blanket accelerator driven system (ADS), that has been developed, created and twice tested under the auspice of the International Science and Technology Center (ISTC), is analyzed. The target complex TC-1 is a circulation lead-bismuth loop whose beam window is made of ferritic steel EP-823 (this steel was used in the past as material of fuel rods cladding in reactors cooled with lead-bismuth). At present TC-1 is operating at coolant temperature up to 300 C degrees and will be used to study different issues linked to the use of lead-bismuth: -) interaction with air, water and hydrogen, -) different regimes of flow, -) corrosion, -) filtering, or -) slag formation

  8. Emulsion liquid membrane for selective extraction of bismuth from nitrate medium

    International Nuclear Information System (INIS)

    Mokhtari, Bahram; Pourabdollah, Kobra

    2013-01-01

    The novelty of this work is the selective extraction of bismuth ions from nitrate medium by emulsion liquid membrane. Di(2-ethylhexyl)phosphoric acid was used as extractant of bismuth ions from nitrate medium by emulsion liquid membrane, and Triton X-100 was used as the biodegradable surfactant in n-pentanol n-pentanol bulk membrane. The extraction of bismuth ions was evaluated by the yield of extraction. The experimental parameters were evaluated and were optimized. They included the ratio of di(2-ethylhexyl)phosphoric acid concentration to the concentration of /Triton X-100 concentration (1.0 : 0.5% w/w), nature of diluents (n-pentanol), nature and concentration of the stripping solution (sulfuric acid, 0.5M), stirring speed (1,800 rpm) and equilibrium time of extraction (20min), initial feed solution of bismuth (350 ppm) and the volume ratio of the internal stripping phase to the membrane phase (14 times). The experimental parameters of kinetic extraction revealed that the bismuth ions were extracted at 100% 97%

  9. Emulsion liquid membrane for selective extraction of bismuth from nitrate medium

    Energy Technology Data Exchange (ETDEWEB)

    Mokhtari, Bahram; Pourabdollah, Kobra [Islamic Azad University, Shahreza (Iran, Islamic Republic of)

    2013-07-15

    The novelty of this work is the selective extraction of bismuth ions from nitrate medium by emulsion liquid membrane. Di(2-ethylhexyl)phosphoric acid was used as extractant of bismuth ions from nitrate medium by emulsion liquid membrane, and Triton X-100 was used as the biodegradable surfactant in n-pentanol n-pentanol bulk membrane. The extraction of bismuth ions was evaluated by the yield of extraction. The experimental parameters were evaluated and were optimized. They included the ratio of di(2-ethylhexyl)phosphoric acid concentration to the concentration of /Triton X-100 concentration (1.0 : 0.5% w/w), nature of diluents (n-pentanol), nature and concentration of the stripping solution (sulfuric acid, 0.5M), stirring speed (1,800 rpm) and equilibrium time of extraction (20min), initial feed solution of bismuth (350 ppm) and the volume ratio of the internal stripping phase to the membrane phase (14 times). The experimental parameters of kinetic extraction revealed that the bismuth ions were extracted at 100% 97%.

  10. Effects of feed loading on nitrogen balances and fish performance in replicated recirculating aquaculture systems

    DEFF Research Database (Denmark)

    Pedersen, Lars-Flemming; Suhr, Karin Isabel; Dalsgaard, Anne Johanne Tang

    2012-01-01

    This study investigated the effects of applying four fixed feed loadings to three replicated recirculating aquaculture systems (RAS) on water quality changes, nitrogenous balances and growth performance of rainbow trout (Oncorhynchus mykiss).Feed loadings ranged from 1.6 to 6.3kgfeed/m3 make...... nitrification performance and diurnal patterns of total ammonia nitrogen (TAN) and nitrite concentrations. No fish mortality occurred during the study. Feed conversion ratios varied between 0.91±0.04 and 0.95±0.02, and were unaffected by feeding load. Mean nitrate-nitrogen levels ranged from 54±7 to 196±10mg....../L at steady state, and the concentration of nitrogenous compounds and organic matter were all positively correlated to feed loading.The TAN loading to the RAS from the specific feed type was assessed in a separate mass-balance study and used as input in a descriptive mathematical model (AQUASIM® software...

  11. Thermodynamic analysis of feed water pre-heaters in multiple effect distillation systems

    International Nuclear Information System (INIS)

    Kouhikamali, R.

    2013-01-01

    The purpose of this article is to investigate the influence of using feed water pre-heaters in multiple effect distillation systems with thermal vapor compression (MED-TVC). By using these heat exchangers, temperature difference between feed water and steam in each effect would be constant. In this way, the required energy for preheating the feed water will decrease and the feed water evaporates as soon as it enters the effect. In this article, it is shown preheating the feed water has a great influence on decreasing the energy consumption of MED-TVC distillation systems. The influence of different configurations of feed water preheating on energy consumption of MED-TVC process is investigated as well. Results show that the energy consumption will be minimum if the pre-heaters increase the feed water temperature in such a way that their temperature difference is equal to that of effects. - Highlights: ► A modified process design of MED-TVC packages has been presented in this article. ► Preheating the feed water results in a remarkable decrease in energy consumption. ► Using feed pre-heaters for warmer effects have more effect on increasing in GOR.

  12. Effects of feeding systems and breed of cattle on reproductive ...

    African Journals Online (AJOL)

    Mo

    as indicators of management standards. This may serve to motivate the producers to change management strategies targeting those weaker components of their management practices. Smallholder farmers in the Kenya highlands are confronted with increasing pressure on land and therefore pressure for animal feeds.

  13. Feed legumes for truly sustainable crop-animal systems

    Directory of Open Access Journals (Sweden)

    Paolo Annicchiarico

    2017-06-01

    Full Text Available Legume cultivation has sharply decreased in Italy during the last 50 years. Lucerne remains widely grown (with about 12% of its area devoted to dehydration, whereas soybean is definitely the most-grown grain legume. Poor legume cropping is mainly due to the gap in yielding ability with major cereals, which has widened up in time according to statistical data. Lucerne displays definitely higher crude protein yield and somewhat lower economic gap with benchmark cereals than feed grain legumes. Pea because of high feed energy production per unit area and rate of genetic progress, and white lupin because of high protein yield per unit area, are particularly interesting for Italian rain-fed environments. Greater legume cultivation in Europe is urged by the need for reducing energy and green-house gas emissions and excessive and unbalanced global N flows through greater symbiotic N fixation and more integrated crop-animal production, as well as to cope with ongoing and perspective raising prices of feed proteins and N fertilisers and insecurity of feed protein supplies. The transition towards greater legume cultivation requires focused research effort, comprehensive stakeholder cooperation and fair economic compensation for legume environmental services, with a key role for genetic improvement dragged by public breeding or pre-breeding. New opportunities for yield improvement arise from the ongoing development of cost-efficient genome-enabled selection procedures, enhanced adaptation to specific cropping conditions via ecophysiological and evolutionary-based approaches, and more thorough exploitation of global genetic resources.

  14. Microstructure and electrical properties of bismuth and bismuth oxide deposited by magnetron sputtering UBM

    International Nuclear Information System (INIS)

    Otalora B, D. M.; Dussan, A.; Olaya F, J. J.

    2015-01-01

    In this work, bismuth (Bi) and bismuth oxide (Bi 2 O 3 ) thin films were prepared, at room temperature, by Sputtering Unbalanced Magnetron (UBM - Unbalance Magnetron) technique under glass substrates. Microstructural and electrical properties of the samples were studied by X-ray diffraction (XRD) and System for Measuring Physical Properties - PPMS (Physical Property Measurement System). Dark resistivity of the material was measured for a temperature range between 100 and 400 K. From the XRD measurements it was observed a polycrystalline character of the Bi associated to the presence of phases above the main peak, 2θ = 26.42 grades and a growth governed by a rhombohedral structure. Crystal parameters were obtained for both compounds, Bi and Bi 2 O 3 . From the analysis of the spectra of the conductivity as a function of temperature, it was established that the transport mechanism that governs the region of high temperature (T>300 K) is thermally activated carriers. From conductivity measurements the activation energies were obtained of 0.0094 eV and 0.015 eV for Bi 2 O 3 and Bi, respectively. (Author)

  15. Development and characterization of 3D-printed feed spacers for spiral wound membrane systems

    KAUST Repository

    Siddiqui, Amber

    2016-01-02

    Feed spacers are important for the impact of biofouling on the performance of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane systems. The objective of this study was to propose a strategy for developing, characterizing, and testing of feed spacers by numerical modeling, three-dimensional (3D) printing of feed spacers and experimental membrane fouling simulator (MFS) studies. The results of numerical modeling on the hydraulic behavior of various feed spacer geometries suggested that the impact of spacers on hydraulics and biofouling can be improved. A good agreement was found for the modeled and measured relationship between linear flow velocity and pressure drop for feed spacers with the same geometry, indicating that modeling can serve as first step in spacer characterization. An experimental comparison study of a feed spacer currently applied in practice and a 3D printed feed spacer with the same geometry showed (i) similar hydraulic behavior, (ii) similar pressure drop development with time and (iii) similar biomass accumulation during MFS biofouling studies, indicating that 3D printing technology is an alternative strategy for development of thin feed spacers with a complex geometry. Based on the numerical modeling results, a modified feed spacer with low pressure drop was selected for 3D printing. The comparison study of the feed spacer from practice and the modified geometry 3D printed feed spacer established that the 3D printed spacer had (i) a lower pressure drop during hydraulic testing, (ii) a lower pressure drop increase in time with the same accumulated biomass amount, indicating that modifying feed spacer geometries can reduce the impact of accumulated biomass on membrane performance. The combination of numerical modeling of feed spacers and experimental testing of 3D printed feed spacers is a promising strategy (rapid, low cost and representative) to develop advanced feed spacers aiming to reduce the impact of biofilm formation on

  16. Crystal growth of bismuth tungstate

    Energy Technology Data Exchange (ETDEWEB)

    De L' Eprevier, A. G.; Shukla, V. N.; Payne, D. A.

    1979-01-01

    Bi/sub 2/WO/sub 6/ is a polar material in the bismuth titanate family, Bi/sub 2/M/sub n-1/R/sub n/0/sub 3n+3/. Additions of NaF to a Na/sub 2/WO/sub 4/ - WO/sub 3/ flux yielded large single crystals up to 0.8 mm thick, which were free of inclusions. Total impurities were less than 500 ppM, and the crystals were single domain.

  17. Synthesis and characterization of Bismuth ferrite (BiFeO3) nanoparticles by solution evaporation method

    International Nuclear Information System (INIS)

    Manzoor, A.; Afzal, A.M.; Umair, M.; Ali, Adnan; Rizwan, M.; Yaqoob, M.Z.

    2015-01-01

    Single phase Bismuth ferrite (BiFeO 3 ) with high magnetization and polarization was synthesized by solution evaporation method (SEM) at room temperature. The influence of temperature and size of nanoparticles on magnetic properties was studied. The prepared Bismuth ferrite (BiFeO 3 ) was characterized by X-ray diffraction (XRD) to investigate the structure and size of crystal. The average crystallite size of nanoparticles (NPs) as calculated by X-ray diffraction (XRD) falls in the range of 22–31 nm. The crystallite size of Bismuth ferrite increased as the temperature varied from 450 °C to 650 °C. Magnetic properties were studied by using physical properties measurement system (PPMS). It was also observed that the magnetic properties were directly related to the size and temperature of Bismuth ferrite nanoparticles. It has been investigated that the magnetization was decreased as the temperature and crystallite size increased. - Highlights: • Bismuth ferrite magnetic material was synthesized by solution evaporation method. • Bismuth ferrite shows ferromagnetic properties at room temperature. • Influence of temperature and crystallite size on magnetic properties was observed. • The magnetization was decreased as the temperature and crystallite size increased. • The magnetic moments were found larger in the smaller crystalline size

  18. Enhanced detection of quantum dots labeled protein by simultaneous bismuth electrodeposition into microfluidic channel.

    Science.gov (United States)

    Medina-Sánchez, Mariana; Miserere, Sandrine; Cadevall, Miquell; Merkoçi, Arben

    2016-02-01

    In this study, we propose an electrochemical immunoassay into a disposable microfluidic platform, using quantum dots (QDs) as labels and their enhanced detection using bismuth as an alternative to mercury electrodes. CdSe@ZnS QDs were used to tag human IgG as a model protein and detected through highly sensitive stripping voltammetry of the dissolved metallic component (cadmium in our case). The modification of the screen printed carbon electrodes (SPCEs) was done by a simple electrodeposition of bismuth that was previously mixed with the sample containing QDs. A magneto-immunosandwich assay was performed using a micromixer. A magnet placed at its outlet in order to capture the magnetic beads used as solid support for the immunoassay. SPCEs were integrated at the end of the channel as detector. Different parameters such as bismuth concentration, flow rate, and incubation times, were optimized. The LOD for HIgG in presence of bismuth was 3.5 ng/mL with a RSD of 13.2%. This LOD was about 3.3-fold lower than the one obtained without bismuth. Furthermore, the sensitivity of the system was increased 100-fold respect to experiments carried out with classical screen-printed electrodes, both in presence of bismuth. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Bismuth ions are metabolized into autometallographic traceable bismuth-sulphur quantum dots

    Directory of Open Access Journals (Sweden)

    M Stoltenberg

    2009-06-01

    Full Text Available Bismuth – sulphur quantum dots can be silver enhanced by autometallography (AMG. In the present study, autometallographic silver enhanced bismuth-sulphur nanocrystals were isolated from unfixed cryo-sections of kidneys and livers of rats exposed to bismuth (Bi207 subnitrate. After being subjected to AMG all the organic material was removed by sonication and enzymatic digestion and the silver enhanced Bi- S quantum dots spun down by an ultracentrifuge and analyzed by scintillation. The analysis showed that the autometallographic technique traces approximately 94% of the total bismuth. This implies that the injected bismuth is ultimately captured in bismuthsulphur quantum dots, i.e., that Bi-S nanocrystals are the end product of bismuth metabolism

  20. Chemical and texture characteristics and sensory properties of “mozzarella” cheese from different feeding systems

    Directory of Open Access Journals (Sweden)

    R. Rubino

    2010-02-01

    Full Text Available The aim of this study was describing the chemical composition, the rheological characteristics and the sensory properties of “mozzarella” cheese produced with milk from buffalos fed with different diets. The study involved two farms and four feeding systems. In farm C, one group was mostly fed with Ryegrass Hay (RH and the other group with Ryegrass Silage (RS. In farm T, instead, one group was mostly fed with Corn Silage (CS and the other one with a Sorghum Silage (SS. In summer, three cheesemakings, for each farm and for each feeding system, were carried out at C.R.A. of Bella. In each farm, data were processed by the analysis of variance in order to compare the effects of two feeding systems. Some parameters of chemical and texture characteristics and sensory properties were influenced by the feeding system. Results were remarkable for the DOP products.

  1. Tank waste remediation system retrieval and disposal mission waste feed delivery plan

    International Nuclear Information System (INIS)

    Potter, R.D.

    1998-01-01

    This document is a plan presenting the objectives, organization, and management and technical approaches for the Waste Feed Delivery (WFD) Program. This WFD Plan focuses on the Tank Waste Remediation System (TWRS) Project's Waste Retrieval and Disposal Mission

  2. Nutritional, technological and managerial parameters for precision feeding to enhance feed nutrient utilization and productivity in different dairy cattle production systems

    NARCIS (Netherlands)

    Empel, van Mireille; Makkar, H.P.S.; Dijkstra, J.; Lund, Peter

    2016-01-01

    Increased future demand of animal products as well as competition between food, feed and fuel, require efficient utilization of feed resources to strengthen environmental, economic and social sustainability of livestock systems. The objective of this review is to summarize current knowledge on

  3. Efficient enhancement of bismuth NIR luminescence by aluminum and its mechanism in bismuth doped germanate laser glass

    DEFF Research Database (Denmark)

    Wang, L.P.; Tan, L.L.; Yue, Yuanzheng

    2016-01-01

    As a new member of laser glass family, bismuth-doped glasses have received rising interests due to the application of fiber amplifiers and laser sources in the new spectral range for the next-generation optical communication system. For practical application of the glasses, it must be considered ......+ are not completely randomly distributed inside germanate glass and they prefer the residence around tetrahedral AlO4 sites....

  4. Radio-sensitization of animals by bismuth

    International Nuclear Information System (INIS)

    Pierotti, T.; Verain, A.

    1969-01-01

    Digestive absorption of bismuth by animals leads to radio-sensitization. This effect is very marked when the X-rays used are centered on the absorption line of bismuth. This work has involved the use of more than 2000 C3H/JAX mice, and has shown that a maximum lethal effect, with respect to the standard, occurs for bismuth sub-nitrate doses of the order of 3 g/kg and for exposures of 700 R. For stronger or weaker doses, the sensitization effect is less marked. (authors) [fr

  5. Blood feeding of Ornithodoros turicata larvae using an artificial membrane system.

    Science.gov (United States)

    Kim, H J; Filatov, S; Lopez, J E; Pérez DE León, A A; Teel, P D

    2017-06-01

    An artificial membrane system was adapted to feed Ornithodoros turicata (Ixodida: Argasidae) larvae from a laboratory colony using defibrinated swine blood. Aspects related to larval feeding and moulting to the first nymphal instar were evaluated. A total of 55.6% of all larvae exposed to the artificial membrane in two experimental groups fed to repletion and 98.0% of all fed larvae moulted. Mortality rates of first instar nymphs differed significantly depending on the sorting tools used to handle engorged larvae (χ 2  = 35.578, P artificial membrane feeding system. Applications of the artificial membrane feeding system to fill gaps in current knowledge of soft tick biology and the study of soft tick-pathogen interactions are discussed. © 2017 The Royal Entomological Society.

  6. Glutathione and multidrug resistance protein transporter mediate a self-propelled disposal of bismuth in human cells.

    Science.gov (United States)

    Hong, Yifan; Lai, Yau-Tsz; Chan, Godfrey Chi-Fung; Sun, Hongzhe

    2015-03-17

    Glutathione and multidrug resistance protein (MRP) play an important role on the metabolism of a variety of drugs. Bismuth drugs have been used to treat gastrointestinal disorder and Helicobacter pylori infection for decades without exerting acute toxicity. They were found to interact with a wide variety of biomolecules, but the major metabolic pathway remains unknown. For the first time (to our knowledge), we systematically and quantitatively studied the metabolism of bismuth in human cells. Our data demonstrated that over 90% of bismuth was passively absorbed, conjugated to glutathione, and transported into vesicles by MRP transporter. Mathematical modeling of the system reveals an interesting phenomenon. Passively absorbed bismuth consumes intracellular glutathione, which therefore activates de novo biosynthesis of glutathione. Reciprocally, sequestration by glutathione facilitates the passive uptake of bismuth and thus completes a self-sustaining positive feedback circle. This mechanism robustly removes bismuth from both intra- and extracellular space, protecting critical systems of human body from acute toxicity. It elucidates the selectivity of bismuth drugs between human and pathogens that lack of glutathione, such as Helicobacter pylori, opening new horizons for further drug development.

  7. Farming Systems Research and Livestock Feed Development : the case of a project on feeding of crop residues in India

    NARCIS (Netherlands)

    Schiere, J.B.; Kiran Singh,; Boer, de A.J.

    2000-01-01

    Increased use of prime agricultural land for cropping and non-agricultural uses in many tropical countries implies that crop residues become more important as a source of feed for livestock. Traditionally, much research on crop residue feeding was done by focusing on laboratory measurements of feed

  8. Investigation into the Flow Properties of Coarse Solid Fuels for Use in Industrial Feed Systems

    Directory of Open Access Journals (Sweden)

    James M. Craven

    2015-01-01

    Full Text Available Material feeding and handling systems have been cited as one of the most common causes of process downtime where thermochemical conversion processes are concerned. New and emerging fuels come in a variety of forms, and if such fuels are to be deployed widely it is imperative that material feeding and handling systems are designed appropriately. This study proposes an approach for designing material feeding and handling systems for use with coarse solid fuels. The data obtained from this study indicates particle size to be one of the key issues affecting the flowability of bulk solids further to the uniformity in particle shape. Coarse bulk solid samples were shown to flow more freely than their milled and pulverised counterparts, generating higher degrees of flowability. The results from this study were also applied to a new feed system used for feeding solid fuels to high pressure processes named the Hydraulic Lock Hopper. In this study the Hydraulic Lock Hopper demonstrated the feeding of wood pellets, torrefied spruce pellets, and ground anthracite coal grains against a pressure of 25 barg in two modes of operation. Energy savings compared to conventional lock hopper systems were recorded in the region of 80%.

  9. Idaho National Laboratory Lead or Lead-Bismuth Eutectic (LBE) Test Facility - R&D Requirements, Design Criteria, Design Concept, and Concept Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Eric P. Loewen; Paul Demkowicz

    2005-05-01

    The Idaho National Laboratory Lead-Bismuth Eutectic Test Facility will advance the state of nuclear technology relative to heavy-metal coolants (primarily Pb and Pb-Bi), thereby allowing the U.S. to maintain the pre-eminent position in overseas markets and a future domestic market. The end results will be a better qualitative understanding and quantitative measure of the thermal physics and chemistry conditions in the molten metal systems for varied flow conditions (single and multiphase), flow regime transitions, heat input methods, pumping requirements for varied conditions and geometries, and corrosion performance. Furthering INL knowledge in these areas is crucial to sustaining a competitive global position. This fundamental heavy-metal research supports the National Energy Policy Development Group’s stated need for energy systems to support electrical generation.1 The project will also assist the Department of Energy in achieving goals outlined in the Nuclear Energy Research Advisory Committee Long Term Nuclear Technology Research and Development Plan,2 the Generation IV Roadmap for Lead Fast Reactor development, and Advanced Fuel Cycle Initiative research and development. This multi-unit Lead-Bismuth Eutectic Test Facility with its flexible and reconfigurable apparatus will maintain and extend the U.S. nuclear knowledge base, while educating young scientists and engineers. The uniqueness of the Lead-Bismuth Eutectic Test Facility is its integrated Pool Unit and Storage Unit. This combination will support large-scale investigation of structural and fuel cladding material compatibility issues with heavy-metal coolants, oxygen chemistry control, and thermal hydraulic physics properties. Its ability to reconfigure flow conditions and piping configurations to more accurately approximate prototypical reactor designs will provide a key resource for Lead Fast Reactor research and development. The other principal elements of the Lead-Bismuth Eutectic Test Facility

  10. Transmucosal penetration of bismuth particles in the human stomach.

    Science.gov (United States)

    Nwokolo, C U; Lewin, J F; Hudson, M; Pounder, R E

    1992-01-01

    Electron microscopic examination of upper gastrointestinal biopsies with x-ray microanalysis was used to detect electron-dense particles of bismuth in the mucosa of the upper gastrointestinal tract, 30-60 minutes after oral dosing with either tripotassium dicitrato bismuthate [De-Noltab; Brocades (Great Britain) Ltd., Weybridge, UK; five patients] or bismuth salicylate (Pepto-Bismol; Richardson Vicks Ltd., Egham, UK; five patients), or without dosing (two patients). Transmucosal penetration of bismuth particles was observed in the gastric antral mucosa of all patients who had been dosed with tripotassium dicitrato bismuthate, but there was no penetration after oral dosing with bismuth salicylate. Persorption of bismuth particles through the gastric mucosa to the vascular endothelium provides an explanation for the rapid rise of plasma bismuth concentration observed only after oral dosing with tripotassium dicitrato bismuthate.

  11. Effect of different commercial feed spacers on biofouling of reverse osmosis membrane systems: A numerical study

    KAUST Repository

    Bucs, Szilard

    2014-06-01

    Feed spacers and hydrodynamics have been found relevant for the impact of biofouling on performance in reverse osmosis (RO) and nanofiltration (NF) membrane systems.The objectives of this study on biofouling development were to determine the impact of (i) linear flow velocity and bacterial cell load, (ii) biomass location and (iii) various feed spacer geometries as applied in practice as well as a modified geometry spacer.A three-dimensional mathematical model for biofouling of feed spacer channels including hydrodynamics, solute mass transport and biofilm formation was developed in COMSOL Multiphysics and MATLAB software.Results of this study indicate that the feed channel pressure drop increase caused by biofilm formation can be reduced by using thicker and/or modified feed spacer geometry and/or a lower flow rate in the feed channel. The increase of feed channel pressure drop by biomass accumulation is shown to be strongly influenced by the location of biomass. Results of numerical simulations are in satisfactory agreement with experimental data, indicating that this micro-scale mechanistic model is representative for practice. The developed model can help to understand better the biofouling process of spiral-wound RO and NF membrane systems and to develop strategies to reduce and control biofouling. © 2013 Elsevier B.V.

  12. Coal-CO[subscript 2] Slurry Feed for Pressurized Gasifiers: Slurry Preparation System Characterization and Economics

    OpenAIRE

    Botero, Cristina; Herzog, Howard J.; Ghoniem, Ahmed F.; Field, Randall

    2013-01-01

    Gasification-based plants with coal-CO[subscript 2] slurry feed are predicted to be more efficient than those with coal-water slurry feed. This is particularly true for high moisture, low rank coal such as lignite. Nevertheless, preparation of the CO[subscript 2] slurry is challenging and the losses associated with this process have not been accounted for in previous analyses. This work introduces the Phase Inversion-based Coal-CO[subscript 2] Slurry (PHICCOS) feeding system, in which coal-CO...

  13. Influence of automatic feeding systems on design and management of dairy farms

    Directory of Open Access Journals (Sweden)

    Francesco Da Borso

    2017-03-01

    Full Text Available During the last decades, many dairy farmers have actively advanced their farms toward automation. Automatic concentrate dispensers and automatic milking systems have been utilised for years, and several manufacturers have introduced automatic feeding systems (AFS. AFSs allow for the increase in frequency of feed distribution with significant advantages in terms of health and production. Furthermore, they provide a reduction of man labour related to preparation of feed, distribution, and propelling the ration closer to the feeding rack. The present research was focused on the monitoring of a dairy farm, located in the Veneto region of Italy, during the transition from a conventional feeding system (CFS, based on a tractor operated mixing wagon, to an automatic system equipped with stationary feeding hoppers, mixing unit, and distribution wagon operating on rail. The article reports a comparative analysis of the structural modifications required for the adoption of AFS, including an analysis of the AFS/CFS systems based on their functionality, energy, and man labour requirements. In the case study, AFS represented an affordable way to reduce covered area of the housings, as a result of the reduction in width of foraging lane and the reduction of manger front length. In addition, AFS demonstrated a reduction in labour requirements and improvement of quality and consistency of work when feeding total mixed ration. Finally, the research was addressed to study dairy cow behaviour. A method for monitoring the feeding, resting, and standing indexes was applied to the CFS farm. As a preliminary result of this activity, a positive correlation between cow resting activity and milk production was discovered.

  14. Bismuth-based electrochemical stripping analysis

    Science.gov (United States)

    Wang, Joseph

    2004-01-27

    Method and apparatus for trace metal detection and analysis using bismuth-coated electrodes and electrochemical stripping analysis. Both anodic stripping voltammetry and adsorptive stripping analysis may be employed.

  15. Electrical resistivity of fast neutron irradiated bismuth

    International Nuclear Information System (INIS)

    Quelard, G.

    1975-01-01

    The production and recovery of fast neutron radiation damage in bismuth, at 20K has been studied by means of electrical resistivity. Results are independent of crystallographic orientation and indicate a creation of carriers during irradiation [fr

  16. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  17. Draft letter report: Evaluation of the adaptability of the DWPF feed preparation system to the HWVP

    International Nuclear Information System (INIS)

    Jones, E.O.; Peterson, M.E.

    1996-03-01

    This report evaluates the performance of the Defense Waste Processing Facility (DWPF) feed preparation System using Hanford Waste Vitrification Plant (HWVP) process criteria and feed properties. Included is a proposed test plan to verify performance of the equipment identified in the evaluation. The HWVP is being designed to vitrify high-level liquid defense waste currently stored in double shell tanks on the Hanford site. The following sections describe the background and objectives and the approach used in this evaluation

  18. Crystallization of bismuth borate glasses

    International Nuclear Information System (INIS)

    Bajaj, Anu; Khanna, Atul

    2009-01-01

    Bismuth borate glasses with Bi 2 O 3 concentration of 20-66 mol% were prepared by melt quenching and devitrified by heat treatment above their glass transition temperatures. All glasses show a strong tendency towards crystallization on annealing that increases with Bi 2 O 3 concentration. The crystalline phases formed on devitrification were characterized by FTIR absorption spectroscopy and DSC measurements. Our studies reveal that phases produced in glasses are strongly determined by initial glass composition and the two most stable crystalline phases are: Bi 3 B 5 O 12 and Bi 4 B 2 O 9 . The metastable BiBO 3 phase can also be formed by devitrification of glass with 50 mol% of Bi 2 O 3 . This phase is, however, unstable and decomposes into Bi 3 B 5 O 12 and Bi 4 B 2 O 9 on prolonged heat treatment.

  19. A modular assembly method of a feed and thruster system for Cubesats

    NARCIS (Netherlands)

    Louwerse, M.C.; Jansen, Henricus V.; Elwenspoek, Michael Curt

    2010-01-01

    A modular assembly method for devices based on micro system technology is presented. The assembly method forms the foundation for a miniaturized feed and thruster system as part of a micro propulsion unit working as a simple blow-down system of a rocket engine. The micro rocket is designed to be

  20. Gravimetric Analysis of Bismuth in Bismuth Subsalicylate Tablets: A Versatile Quantitative Experiment for Undergraduate Laboratories

    Science.gov (United States)

    Davis, Eric; Cheung, Ken; Pauls, Steve; Dick, Jonathan; Roth, Elijah; Zalewski, Nicole; Veldhuizen, Christopher; Coeler, Joel

    2015-01-01

    In this laboratory experiment, lower- and upper-division students dissolved bismuth subsalicylate tablets in acid and precipitated the resultant Bi[superscript 3+] in solution with sodium phosphate for a gravimetric determination of bismuth subsalicylate in the tablets. With a labeled concentration of 262 mg/tablet, the combined data from three…

  1. The establishment of a database of Italian feeds for the Cornell Net Carbohydrate and Protein System

    Directory of Open Access Journals (Sweden)

    Enzo Tartari

    2010-01-01

    Full Text Available A field application of the Cornell Net Carbohydrate and Protein System (CNCPS in Italy has been limited because thefeed bank is based on North American feedstuffs and still few laboratories are able to analyze feeds as requested by theCNCPS. Moreover, the standardization of analytical procedures is still not homogeneous among laboratories. This workwas carried out to establish a first database for feeds commonly used in Italy, providing nutritionists and producers anaccurate and current feed composition, also indicating methods and apparatus for analytical procedures potentially availablefor routine analysis. A total of 909 samples of hays, silages and raw materials (protein feeds, cereals and by-productswere analyzed through 1999 and 2002; analysis included protein solubility and degradability, protein fractions,structural carbohydrate fractions and the calculation of neutral detergent structural carbohydrates. When possible, averagedata were compared with those included in the feed bank of CNCPS ver. 3 and with those obtained by another Italianlaboratory. The main differences were observed in chemical composition of forages and silages, whose composition largelydepends on environmental conditions and physiological stage; protein feeds, cereals and by-products showed somedifferences in crude protein, soluble protein and protein fractions even in feeds of national origin.The intent to modify the feed bank values of CNCPS for establishing an Italian data base of feeds will require a collaborativestudy of many laboratories not only for forages, hays and silages samples - whose composition is greatly dependenton environmental factors and agronomic techniques - but also for protein fractions, whose values are largely influencedby even small changes in analytical techniques.

  2. Sulfate-reducing bacteria slow intestinal transit in a bismuth-reversible fashion in mice.

    Science.gov (United States)

    Ritz, N L; Lin, D M; Wilson, M R; Barton, L L; Lin, H C

    2017-01-01

    Hydrogen sulfide (H 2 S) serves as a mammalian cell-derived gaseous neurotransmitter. The intestines are exposed to a second source of this gas by sulfate-reducing bacteria (SRB). Bismuth subsalicylate binds H 2 S rendering it insoluble. The aim of this study was to test the hypothesis that SRB may slow intestinal transit in a bismuth-reversible fashion. Eighty mice were randomized to five groups consisting of Live SRB, Killed SRB, SRB+Bismuth, Bismuth, and Saline. Desulfovibrio vulgaris, a common strain of SRB, was administered by gavage at the dose of 1.0 × 10 9 cells along with rhodamine, a fluorescent dye. Intestinal transit was measured 50 minutes after gavage by euthanizing the animals, removing the small intestine between the pyloric sphincter and the ileocecal valve and visualizing the distribution of rhodamine across the intestine using an imaging system (IVIS, Perkin-Elmer). Intestinal transit (n=50) was compared using geometric center (1=minimal movement, 100=maximal movement). H 2 S concentration (n=30) was also measured when small intestinal luminal content was allowed to generate this gas. The Live SRB group had slower intestinal transit as represented by a geometric center score of 40.2 ± 5.7 when compared to Saline: 73.6 ± 5.7, Killed SRB: 77.9 ± 6.9, SRB+Bismuth: 81.0 ± 2.0, and Bismuth: 73.3 ± 4.2 (Pfashion in mice. Our results demonstrate that intestinal transit is slowed by SRB and this effect could be abolished by H 2 S-binding bismuth. © 2016 John Wiley & Sons Ltd.

  3. [Geochemical distribution of dissolved bismuth in the Yellow Sea and East China Sea].

    Science.gov (United States)

    Wu, Xiao-Dan; Song, Jin-Ming; Wu, Bin; Li, Xue-Gang

    2014-01-01

    Occurrence level, geochemical distribution of dissolved bismuth and its coupling relationship to eco-environment were investigated in the Yellow Sea and East China Sea to explore the source and influencing factors. The results showed that the concentration of dissolved bismuth was within the range of 0-0. 029 microg x L(-1) at the surface and 0.001-0.189 microg x L(-1) at the bottom, with the averages of 0.008 and 0.016 microg x L(-1), respectively. Horizontally, low value of dissolved bismuth exhibited the bidirectional extension feature, indicating that it could trace the path of Changjiang Diluted Water. High value of dissolved bismuth was observed where the Subei Costal Current and Yellow Sea Warm Current flowed and the Changjiang Diluted Water and Zhejiang-Fujian Coastal Current met, suggesting that it was controlled by the cycle of current system. Vertically, the coastal water was fully mixed by water convection and eddy mixing, and was divided from the stratified water by strong tidal front, which blocked the transport of dissolved bismuth to the open sea. Thus, the concentration in front area was significantly higher than that in the open sea. Diurnal variation of dissolved bismuth was related to the hydrodynamic conditions (tide, suspension and thermocline) instead of the environmental factors (temperature and salinity). Positive relationship to SPM (suspended particulate matter) clarified that bismuth was prone to release from solid phase to liquid phase. Furthermore, conditions with temperature ranging 22-27 degrees C, salinity ranging 28-31 and pH ranging 7.9-8.1 were shown to be optimal for the release process.

  4. Functional evolution of the feeding system in rodents.

    Directory of Open Access Journals (Sweden)

    Philip G Cox

    Full Text Available The masticatory musculature of rodents has evolved to enable both gnawing at the incisors and chewing at the molars. In particular, the masseter muscle is highly specialised, having extended anteriorly to originate from the rostrum. All living rodents have achieved this masseteric expansion in one of three ways, known as the sciuromorph, hystricomorph and myomorph conditions. Here, we used finite element analysis (FEA to investigate the biomechanical implications of these three morphologies, in a squirrel, guinea pig and rat. In particular, we wished to determine whether each of the three morphologies is better adapted for either gnawing or chewing. Results show that squirrels are more efficient at muscle-bite force transmission during incisor gnawing than guinea pigs, and that guinea pigs are more efficient at molar chewing than squirrels. This matches the known diet of nuts and seeds that squirrels gnaw, and of grasses that guinea pigs grind down with their molars. Surprisingly, results also indicate that rats are more efficient as well as more versatile feeders than both the squirrel and guinea pig. There seems to be no compromise in biting efficiency to accommodate the wider range of foodstuffs and the more general feeding behaviour adopted by rats. Our results show that the morphology of the skull and masticatory muscles have allowed squirrels to specialise as gnawers and guinea pigs as chewers, but that rats are high-performance generalists, which helps explain their overwhelming success as a group.

  5. Effect of feed pressure on the performance of the photovoltaic powered reverse osmosis seawater desalination system

    Energy Technology Data Exchange (ETDEWEB)

    Gandhidasan, P.; Al-Mojel, Sultan A. [Mechanical Engineering Department, King Fahd University of Petroleum and Minerals, KFUPM Box No. 294, Dhahran 31261 (Saudi Arabia)

    2009-12-15

    This paper describes the potential of the development of a seawater desalination system that combines the technologies of reverse osmosis (RO) and photovoltaic (PV) to deliver 100 m{sup 3}/day of sweet water. Silicon cells are chosen for the PV array and the polyamide thin-film composite seawater Filmtec membranes are selected for the RO system. The software ROSA is adopted to study the influences of the feed pressure on the performance of the system. It is found that as the feed pressure increases, the specific energy of the plant decreases but the percentage of recovery increases. (author)

  6. The Auto control System Based on InTouch Configuration software for High-gravity Oil Railway Tank Feeding

    Directory of Open Access Journals (Sweden)

    Xu De-Kai

    2015-01-01

    Full Text Available This paper provides automatic design for high-gravity oil railway tank feeding system of some refinery uses distributive control system. The system adopts the automatic system of Modicon TSX Quantum or PLC as monitor and control level and uses a PC-based plat form as principal computer running on the Microsoft Windows2000. An automatic control system is developed in the environment of InTouch configuration software. This system implements automatic high-gravity oil tank feeding with pump controlling function. And it combines automatic oil feeding controlling, pump controlling and tank monitoring function to implement the automation of oil feeding with rations and automatic control.

  7. Element Distribution in the Oxygen-Rich Side-Blow Bath Smelting of a Low-Grade Bismuth-Lead Concentrate

    Science.gov (United States)

    Yang, Tianzu; Xiao, Hui; Chen, Lin; Chen, Wei; Liu, Weifeng; Zhang, Duchao

    2018-03-01

    Oxygen-rich side-blow bath smelting (OSBS) technology offers an efficient method for processing complex bismuth-lead concentrates; however, the element distributions in the process remain unclear. This work determined the distributions of elements, i.e., bismuth, lead, silver, copper, arsenic and antimony, in an industrial-scale OSBS process. The feed, oxidized slag and final products were collected from the respective sampling points and analyzed. For the oxidative smelting process, 65% of bismuth and 76% of silver in the concentrate report to the metal alloy, whereas less lead reports to the metal ( 31%) than the oxidized slag ( 44%). Approximately 50% of copper enters the matte, while more than 63% of arsenic and antimony report to the slag. For the reductive smelting process, less than 4.5% of bismuth, lead, silver and copper in the oxidized slag enter the reduced slag, indicating high recoveries of these metal values.

  8. Bismuth alloy potting seals aluminum connector in cryogenic application

    Science.gov (United States)

    Flower, J. F.; Stafford, R. L.

    1966-01-01

    Bismuth alloy potting seals feedthrough electrical connector for instrumentation within a pressurized vessel filled with cryogenic liquids. The seal combines the transformation of high-bismuth content alloys with the thermal contraction of an external aluminum tube.

  9. Photochemically Etched Construction Technology Developed for Digital Xenon Feed Systems

    Science.gov (United States)

    Otsap, Ben; Cardin, Joseph; Verhey, Timothy R.; Rawlin, Vincent K.; Mueller, Juergen; Aadlund, Randall; Kay, Robert; Andrews, Michael

    2005-01-01

    Electric propulsion systems are quickly emerging as attractive options for primary propulsion in low Earth orbit, in geosynchronous orbit, and on interplanetary spacecraft. The driving force behind the acceptance of these systems is the substantial reduction in the propellant mass that can be realized. Unfortunately, system designers are often forced to utilize components designed for chemical propellants in their electric systems. Although functionally acceptable, these relatively large, heavy components are designed for the higher pressures and mass flow rates required by chemical systems. To fully realize the benefits of electric propulsion, researchers must develop components that are optimized for the low flow rates, critical leakage needs, low pressures, and limited budgets of these emerging systems.

  10. Effect of feeding systems on aromatic characteristics of buffalo mozzarella cheese

    Directory of Open Access Journals (Sweden)

    M.A. Di Napoli

    2010-02-01

    Full Text Available Aim of this study was to evaluated the effect of feeding systems (hay vs ray-grass silage on volatile compounds profiles of mozzarella cheese. Three mozzarella cheese making trials for each experimental group were conducted at our dairy technology laboratory. Mozzarella cheese was manufactured from whole raw water buffalo milk with the addition of natural starter. Volatile compounds were extracted by “purge and trap” system coupled to a gas chromatograph and detected operating with a mass-selective detector (Ciccioli et al., 2004 A total of 84 compounds of the following chemical families were detected: hydrocarbons, fatty acids, esters, alcohols, aldehydes, ketones and terpenes. The data overall indicated difference between the aromatic profiles of mozzarella cheese as consequence of feeding systems. Thus, differences in mozzarella cheese flavour are primarily caused by concentration differences of a common set of flavour compounds, rather than by the occurrence of compounds uniquely associated with a particular feed.

  11. Disturbance rejection using feed-forward control system on self balancing robot

    Directory of Open Access Journals (Sweden)

    Henryranu Prasetio Barlian

    2018-01-01

    Full Text Available This research implements self-balancing robot using 3 algorithms. There are PID Controller, Ensemble Kalman Filter and Feed-Forward Control system. The PID controller function is as a robot equilibrium control system. The Kalman Ensemble algorithm is used to reduce noise measurement of accelerometer and gyroscope sensors. The PID controller and Ensemble Kalman filter were implemented on self-balancing robot in previous research. In this paper, we added the Feed-Forward controller that serves to detect disturbance derived from the unevenness of the ground. Disturbance is detected using 2 proximity sensors. Base on test results that the system can detect disturbance with an average delay of 2.15 seconds at Kff optimal value is 2.92. Feed-Forward effects result in self-balancing robots increasing power so that the pitch of the robot changes to anticipation of disturbance.

  12. Simultaneous Sensor and Process Fault Diagnostics for Propellant Feed System

    Science.gov (United States)

    Cao, J.; Kwan, C.; Figueroa, F.; Xu, R.

    2006-01-01

    The main objective of this research is to extract fault features from sensor faults and process faults by using advanced fault detection and isolation (FDI) algorithms. A tank system that has some common characteristics to a NASA testbed at Stennis Space Center was used to verify our proposed algorithms. First, a generic tank system was modeled. Second, a mathematical model suitable for FDI has been derived for the tank system. Third, a new and general FDI procedure has been designed to distinguish process faults and sensor faults. Extensive simulations clearly demonstrated the advantages of the new design.

  13. Effect of Over Zone Feeding on Rail Potential and Stray Current in DC Mass Transit System

    Directory of Open Access Journals (Sweden)

    Guifu Du

    2016-01-01

    Full Text Available DC traction power system with running rails as reflux conductor has been adopted in Guangzhou Metro Line 8. During the operation of the Guangzhou Metro Line, a high rail potential has been observed, and the leakage of stray current increases significantly. Because of the electrical connectivity of the catenary, over zone feeding of traction current may exist when multiple trains run in multiple traction substations. Guangzhou Metro Line 8 suspects that over zone feeding of traction current is the major cause of the high rail potential. In this paper, a unified chain model of DC traction power system is proposed to simulate the distribution of rail potential and stray current. Field tests and simulations have been carried out to study whether over zone feeding has an impact on rail potential and stray current. Results show that over zone feeding widely exists in DC traction power system and that the rail potential and stray current can be reduced effectively by preventing the over zone feeding of traction current.

  14. Hanford Tank Farms Waste Feed Flow Loop Phase VI: PulseEcho System Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Denslow, Kayte M.; Bontha, Jagannadha R.; Adkins, Harold E.; Jenks, Jeromy WJ; Hopkins, Derek F.

    2012-11-21

    This document presents the visual and ultrasonic PulseEcho critical velocity test results obtained from the System Performance test campaign that was completed in September 2012 with the Remote Sampler Demonstration (RSD)/Waste Feed Flow Loop cold-test platform located at the Monarch test facility in Pasco, Washington. This report is intended to complement and accompany the report that will be developed by WRPS on the design of the System Performance simulant matrix, the analysis of the slurry test sample concentration and particle size distribution (PSD) data, and the design and construction of the RSD/Waste Feed Flow Loop cold-test platform.

  15. Characterization and re-activation of oxygen sensors for use in liquid lead-bismuth

    International Nuclear Information System (INIS)

    Kurata, Yuji; Abe, Yuji; Futakawa, Masatoshi; Oigawa, Hiroyuki

    2010-01-01

    Control of oxygen concentration in liquid lead-bismuth is one of the most important tasks to develop accelerator driven systems. In order to improve the reliability of oxygen sensors, re-activation treatments were investigated as well as characterization of oxygen sensors for use in liquid lead-bismuth. The oxygen sensor with a solid electrolyte of yttria-stabilized zirconia and a Pt/gas reference electrode showed almost the same electromotive force values in gas and liquid lead-bismuth, respectively, as the theoretical ones at temperatures above 400 deg. C or 450 deg. C. After long-term use of 6500 h, the outputs of the sensor became incorrect in liquid lead-bismuth. The state of the sensor that indicated incorrect outputs could not be recovered by cleaning with a nitric acid. However, it was found that the oxygen sensor became a correct sensor indicating theoretical values in liquid lead-bismuth after re-activation by the Pt-treatment of the outer surface of the sensor.

  16. Studies on bismuth carboxylates—synthesis and characterization of ...

    Indian Academy of Sciences (India)

    1. Introduction. A large number of bismuth compounds are clinically active against Helicobacter pylori and other gastroin- testinal disorders.1–2 Prominent among these are bis- muth subsalicylate (trade name Pepto-Bismol), col- loidal bismuth subcitrate (CBS, trade name De-Nol) and ranitidine bismuth citrate (trade name ...

  17. Short report: evaluation of Helicobacter pylori eradication with bismuth sucralfate

    NARCIS (Netherlands)

    Reijers, M. H.; Noach, L. A.; Tytgat, G. N.

    1994-01-01

    In a pilot study we have evaluated the clinical efficacy of bismuth sucralfate to eradicate H. pylori. Ten consecutive patients with chronic dyspepsia and H. pylori associated gastritis were treated with bismuth sucralfate (220 mg bismuth per tablet, 4 tablets per day for 4 weeks). If a 14C urea

  18. 21 CFR 520.1204 - Kanamycin, bismuth subcarbonate, activated attapulgite.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Kanamycin, bismuth subcarbonate, activated... § 520.1204 Kanamycin, bismuth subcarbonate, activated attapulgite. (a) Specifications—(1) Each 5 milliliters (mL) of suspension contains 100 milligrams (mg) kanamycin (as the sulfate), 250 mg bismuth...

  19. Development, Demonstration, and Analysis of an Integrated Iodine Hall Thruster Feed System

    Science.gov (United States)

    Polzin, Kurt A.; Peeples, Steven R.; Burt, Adam O.; Martin, Adam K.; Martinez, Armando; Seixal, Joao F.; Mauro, Stephanie

    2016-01-01

    The design of an in-space iodine-vapor-fed Hall effect thruster propellant management system is described. The solid-iodine propellant tank has unique issues associated with the microgravity environment, requiring a solution where the iodine is maintained in intimate thermal contact with the heated tank walls. The flow control valves required alterations from earlier iterations to survive for extended periods of time in the corrosive iodine-vapor environment. Materials have been selected for the entire feed system that can chemically resist the iodine vapor, with the design now featuring Hastelloy or Inconel for almost all the wetted components. An integrated iodine feed system/Hall thruster demonstration unit was fabricated and tested, with all control being handled by an onboard electronics card specifically designed to operate the feed system. Structural analysis shows that the feed system can survive launch loads after the implementation of some minor reinforcement. Flow modeling, while still requiring significant additional validation, is presented to show its potential in capturing the behavior of components in this low-flow, low-pressure system.

  20. FRACTIONAL CRYSTALLIZATION TESTING WITH INTERIM PRETREATMENT SYSTEM FEEDS

    International Nuclear Information System (INIS)

    HERTING DL

    2008-01-01

    The fractional crystallization process was developed as a pretreatment method for saltcake waste retrieved from Hanford single-shell tanks (SST). The process separates the retrieved SST waste into a high-level waste stream containing the bulk of the radionuclides and a low-activity waste stream containing the bulk of the nonradioactive sodium salts. The Interim Pretreatment System project shifted the focus on pretreatment planning from SST waste to double-shell tank waste

  1. Inadvertent exaggerated anticoagulation following use of bismuth subsalicylate in an enterally fed patient receiving warfarin therapy.

    Science.gov (United States)

    Bingham, Angela L; Brown, Rex O; Dickerson, Roland N

    2013-12-01

    We report a case of an inadvertent increase in the international normalized ratio (INR) after the addition of bismuth subsalicylate for the treatment of diarrhea in an enterally fed patient receiving warfarin therapy. A 56-year-old Caucasian female presented to the trauma intensive care unit (ICU) with multiple lower extremity fractures. Warfarin was initiated for deep vein thrombosis prophylaxis due to the patient's inability to ambulate. The target INR was 2-3. Continuous intragastric enteral feeding was withheld 1 hour before and 1 hour after intragastric administration of warfarin. Bismuth subsalicylate 30 mL every 4 hours was prescribed for diarrhea. Within 3 days after starting bismuth subsalicylate therapy, the patient's INR increased from 2.56 to 3.54 and minor bleeding was noted from the patient's tracheostomy site. No significant change in warfarin dosage, variability in vitamin K intake, or medications that potentially alter warfarin metabolism were present during the unexpected rise in INR. When the bismuth subsalicylate was discontinued, the patient's INR stabilized into the target range on the same warfarin dose given at the time of the supratherapeutic INR. Salicylate displaces warfarin from plasma protein binding sites and may result in a significant increase in INR secondary to redistribution of warfarin to the free active form. Evaluation of this case report using the Drug Interaction Probability Scale and Naranjo Adverse Drug Reaction Probability Scale yielded scores consistent with a probable adverse drug interaction. Bismuth subsalicylate exaggerates warfarin's anticoagulant response and its concurrent use during warfarin therapy should be avoided.

  2. Peculiarities of the interaction of indium-tin and indium-bismuth alloys with ammonium halides

    International Nuclear Information System (INIS)

    Red'kin, A.N.; Smirnov, V.A.; Sokolova, E.A.; Makovej, Z.I.; Telegin, G.F.

    1990-01-01

    Peculiarities of fusible metal alloys interaction with ammonium halogenides in vertical reactor are considered using indium-tin and indium-bismuth binary alloys. It is shown that at the end of the process the composition of metal and salt phases is determined by the equilibrium type and constant characteristic of the given salt-metal system. As a result the interaction of indium-tin and indium-bismuth alloys with ammonium halogenides leads to preferential halogenation of indium-bismuth alloys with ammonium halogenides leads to preferential halogenation of indium which may be used in the processes of separation or purification. A model is suggested to calculate the final concentration of salt and metal phase components

  3. Genotoxicity studies of heavy metals: lead, bismuth, indium, silver and antimony.

    Science.gov (United States)

    Asakura, Keiko; Satoh, Hiroshi; Chiba, Momoko; Okamoto, Masahide; Serizawa, Koji; Nakano, Makiko; Omae, Kazuyuki

    2009-01-01

    Many kinds of heavy metals are used in industry; thus, it is important for us to clarify their toxicity. For example, lead, which is a component of solder, is notorious for its neurotoxicity, and substitute materials have been sought for many years. Therefore, we examined the genotoxicity of lead and also those of metallic bismuth, indium, silver and antimony which are possible substitutes for lead in solder. Bacterial reverse mutation tests and chromosomal aberration tests in cultured mammalian cells were performed according to standard procedures. Antimony showed genotoxicity in both tests, and bismuth also showed positive results in the chromosomal aberration test. In contrast, lead, indium, and silver were considered to be inactive by the criteria of the present study. Although further studies are needed because of the difficulty of genotoxicity evaluation using an in vitro system, sufficient precautions should be made when antimony and bismuth are used.

  4. Impacts of wind energy in-feed on power system small signal stability

    OpenAIRE

    Banna, Hasan UI; Luna Alloza, Álvaro; Ying, Shaoqing; Ghorbani, Hamidreza; Rodríguez Cortés, Pedro

    2014-01-01

    Integration of large amount of wind energy in an interconnected power system creates concerns about secure, reliable and economical operation of the entire power system. So it becomes very necessary to investigate the impacts of wind power infeed on the dynamic behavior of the power system. This paper presents the impacts of large amount of wind power in feed on the rotor oscillatory stability. Wind turbine generator types currently employed in wind farms, optimal location of the wind farms i...

  5. School feeding, moving from practice to policy: reflections on building sustainable monitoring and evaluation systems.

    Science.gov (United States)

    Gelli, Aulo; Espejo, Francisco

    2013-06-01

    To provide an overview of the status of monitoring and evaluation (M&E) of school feeding across sub-Saharan Africa and to reflect on the experience on strengthening M&E systems to influence policy making in low-income countries. Literature review on the M&E of school feeding programmes as well as data from World Food Programme surveys. Sub-Saharan Africa. Countries implementing school feeding. Only two randomized controlled impact evaluations have been implemented in sub-Saharan Africa. Where M&E data collection is underway, the focus is on process and service delivery and not on child outcomes. M&E systems generally operate under the Ministry of Education, with other Ministries represented within technical steering groups supporting implementation. There is no internationally accepted standardized framework for the M&E of school feeding. There have been examples where evidence of programme performance has influenced policy: considering the popularity of school feeding these cases though are anecdotal, highlighting the opportunity for systemic changes. There is strong buy-in on school feeding from governments in sub-Saharan Africa. In response to this demand, development partners have been harmonizing their support to strengthen national programmes, with a focus on M&E. However, policy processes are complex and can be influenced by a number of factors. A comprehensive but simple approach is needed where the first step is to ensure a valid mandate to intervene, legitimizing the interaction with key stakeholders, involving them in the problem definition and problem solving. This process has been facilitated through the provision of technical assistance and exposure to successful experiences through South–South cooperation and knowledge exchange.

  6. Analytical modelling of waveguide mode launchers for matched feed reflector systems

    DEFF Research Database (Denmark)

    Palvig, Michael Forum; Breinbjerg, Olav; Meincke, Peter

    2016-01-01

    Matched feed horns aim to cancel cross polarization generated in offset reflector systems. An analytical method for predicting the mode spectrum generated by inclusions in such horns, e.g. stubs and pins, is presented. The theory is based on the reciprocity theorem with the inclusions represented...

  7. Analysis of Waste Leak and Toxic Chemical Release Accidents from Waste Feed Delivery (WFD) Diluent System

    Energy Technology Data Exchange (ETDEWEB)

    WILLIAMS, J.C.

    2000-09-15

    Radiological and toxicological consequences are calculated for 4 postulated accidents involving the Waste Feed Delivery (WFD) diluent addition systems. Consequences for the onsite and offsite receptor are calculated. This analysis contains technical information used to determine the accident consequences for the River Protection Project (RPP) Final Safety Analysis Report (FSAR).

  8. Analysis of Waste Leak and Toxic Chemical Release Accidents from Waste Feed Delivery (WFD) Diluent System

    International Nuclear Information System (INIS)

    WILLIAMS, J.C.

    2000-01-01

    Radiological and toxicological consequences are calculated for 4 postulated accidents involving the Waste Feed Delivery (WFD) diluent addition systems. Consequences for the onsite and offsite receptor are calculated. This analysis contains technical information used to determine the accident consequences for the River Protection Project (RPP) Final Safety Analysis Report (FSAR)

  9. Feeding Behavior of Aplysia: A Model System for Comparing Cellular Mechanisms of Classical and Operant Conditioning

    Science.gov (United States)

    Baxter, Douglas A.; Byrne, John H.

    2006-01-01

    Feeding behavior of Aplysia provides an excellent model system for analyzing and comparing mechanisms underlying appetitive classical conditioning and reward operant conditioning. Behavioral protocols have been developed for both forms of associative learning, both of which increase the occurrence of biting following training. Because the neural…

  10. Equilibrium distribution of lanthanum, neodymium, and thorium between lithium chloride melt and liquid bismuth

    Science.gov (United States)

    Zagnit'ko, A. V.; Ignat'ev, V. V.

    2013-04-01

    The distribution of lanthanum, neodymium, and thorium between a lithium chloride melt and liquid bismuth with additions of lithium as a reducing agent are investigated at 650°C. Equilibrium values of their distribution constants are measured. It is shown that in contrast to neodymium and lanthanum, thorium cannot be extracted from bismuth into lithium chloride. This allows us to propose an efficient scheme for separating lanthanides and thorium in a system for the extraction of fuel salts in molten-salt nuclear reactors.

  11. Hyperfine splitting in lithium-like bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Lochmann, Matthias; Froemmgen, Nadja; Hammen, Michael; Will, Elisa [Universitaet Mainz (Germany); Andelkovic, Zoran; Kuehl, Thomas; Litvinov, Yuri; Winters, Danyal; Sanchez, Rodolfo [GSI Helmholtzzentrum, Darmstadt (Germany); Botermann, Benjamin; Noertershaeuser, Wilfried [Technische Universitaet Darmstadt (Germany); Bussmann, Michael [Helmholtzzentrum Dresden-Rossendorf (Germany); Dax, Andreas [CERN, Genf (Switzerland); Hannen, Volker; Joehren, Raphael; Vollbrecht, Jonas; Weinheimer, Christian [Universitaet Muenster (Germany); Geppert, Christopher [Universitaet Mainz (Germany); GSI Helmholtzzentrum, Darmstadt (Germany); Stoehlker, Thomas [GSI Helmholtzzentrum, Darmstadt (Germany); Universitaet Heidelberg (Germany); Thompson, Richard [Imperial College, London (United Kingdom); Volotka, Andrey [Technische Universitaet Dresden (Germany); Wen, Weiqiang [IMP Lanzhou (China)

    2013-07-01

    High-precision measurements of the hyperfine splitting values on Li- and H-like bismuth ions, combined with precise atomic structure calculations allow us to test QED-effects in the regime of the strongest magnetic fields that are available in the laboratory. Performing laser spectroscopy at the experimental storage ring (ESR) at GSI Darmstadt, we have now succeeded in measuring the hyperfine splitting in Li-like bismuth. Probing this transition has not been easy because of its extremely low fluorescence rate. Details about this challenging experiment will be given and the achieved experimental accuracy are presented.

  12. Bismuth salicylate for diarrhea in children

    Science.gov (United States)

    Goldman, Ran D.

    2013-01-01

    Abstract Question Recently, I had a visit from a 5-year-old patient who had been given bismuth subsalicylate for a diarrheal illness by a local family physician during a trip to South America. Is this a practice we should encourage? Answer Research from developing countries has found the use of bismuth subsalicylate to be effective in shortening the duration of diarrheal illness. Despite these findings, its limited effectiveness and concerns about it potentially causing Reye syndrome, compliance, and cost are the key reasons it is not routinely recommended for children. PMID:23946025

  13. Bismuth Subgallate Toxicity in the Age of Online Supplement Use.

    Science.gov (United States)

    Sampognaro, Paul; Vo, Kathy T; Richie, Megan; Blanc, Paul D; Keenan, Kevin

    2017-11-01

    Bismuth salts have been used to treat gastroenterological disorders and are readily available over-the-counter and via the internet. Even though generally considered safe, bismuth compounds can cause a syndrome of subacute, progressive encephalopathy when taken in large quantities. We present the case of woman who developed progressive encephalopathy, aphasia, myoclonus, and gait instability after chronically ingesting large amounts of bismuth subgallate purchased from a major online marketing website to control symptoms of irritable bowel syndrome. After extensive neurological work-up, elevated bismuth levels in her blood, urine, and cerebrospinal fluid confirmed the diagnosis of bismuth-related neurotoxicity. She improved slowly following cessation of exposure. This case highlights bismuth subgallate as a neurotoxic bismuth formulation and reminds providers of the potential for safety misconceptions of positively reviewed online supplements.

  14. Livestock and feed water productivity in the mixed crop-livestock system.

    Science.gov (United States)

    Bekele, M; Mengistu, A; Tamir, B

    2017-10-01

    Recently with limited information from intensified grain-based farming systems in developed countries, livestock production is challenged as being huge consumer of freshwater. The smallholder mixed crop-livestock (MCL) system which is predominant in developing countries like Ethiopia, is maintained with considerable contributions of crop residues (CR) to livestock feeding. Inclusion of CR is expected to reduce the water requirement for feed production resulting improvement in livestock water productivity (LWP). This study was conducted to determine feed water productivity (FWP) and LWP in the MCL system. A multistage sampling procedure was followed to select farmers from different wealth status. Wealth status dictated by ownership of key farm resources such as size of cropland and livestock influenced the magnitude of livestock outputs, FWP and LWP. Significant difference in feed collected, freshwater evapotranspired, livestock outputs and water productivity (WP) were observed between wealth groups, where wealthier are relatively more advantaged. Water productivity of CR and grazing land (GL) analyzed separately showed contrasting differences where better-off gained more on CR, whereas vice versa on GL. These counterbalancing of variations may justify the non-significant difference in total FWP between wealth groups. Despite observed differences, low WP on GL indicates the need of interventions at all levels. The variation in WP of CR is attributed to availability of production factors which restrained the capacity of poor farmers most. A linear relationship between the proportion of CR in livestock feed and FWP was evident, but the relationship with LWP was not likely linear. As CR are inherently low in digestibility and nutritive values which have an effect on feed conversion into valuable livestock products and services, increasing share of CR beyond an optimum level is not a viable option to bring improvements in livestock productivity as expressed in terms of

  15. A scanning electron microscopy study of bismuth and phosphate phases in bismuth phosphate process waste at Hanford

    International Nuclear Information System (INIS)

    Reynolds, J.G.; Page, J.S.; Cooke, G.A.; John Pestovich

    2015-01-01

    This study characterizes major bismuth and phosphate-bearing phases in Hanford radioactive waste from the bismuth phosphate process using scanning electron microscopy with energy dispersive spectroscopy. Large bismuth phases displayed lath morphology and consisted of sodium, iron, bismuth, and phosphorus. The majority of the bismuth and phosphate observed was in small particulate (<2 µm in diameter) containing sodium, phosphorus, iron, and nickel. Additionally, phosphorus was included in a sodium-aluminum-phosphate lath-shaped species. Characterization of these waste types is of particular importance since they may have the bounding particle properties for designing waste mixing and transport processes used during treatment. (author)

  16. Yttrium bismuth titanate pyrochlore mixed oxides for photocatalytic hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Merka, Oliver

    2012-10-18

    In this work, the sol-gel synthesis of new non-stoichiometric pyrochlore titanates and their application in photocatalytic hydrogen production is reported. Visible light response is achieved by introducing bismuth on the A site or by doping the B site by transition metal cations featuring partially filled d orbitals. This work clearly focusses on atomic scale structural changes induced by the systematical introduction of non-stoichiometry in pyrochlore mixed oxides and the resulting influence on the activity in photocatalytic hydrogen production. The materials were characterized in detail regarding their optical properties and their atomic structure. The pyrochlore structure tolerates tremendous stoichiometry variations. The non-stoichiometry in A{sub 2}O{sub 3} rich compositions is compensated by distortions in the cationic sub-lattice for the smaller Y{sup 3+} cation and by evolution of a secondary phase for the larger Bi{sup 3+} cation on the A site. For TiO{sub 2} rich compositions, the non-stoichiometry leads to a special vacancy formation in the A and optionally O' sites. It is shown that pyrochlore mixed oxides in the yttrium bismuth titanate system represent very active and promising materials for photocatalytic hydrogen production, if precisely and carefully tuned. Whereas Y{sub 2}Ti{sub 2}O{sub 7} yields stable hydrogen production rates over time, the bismuth richer compounds of YBiTi{sub 2}O{sub 7} and Bi{sub 2}Ti{sub 2}O{sub 7} are found to be not stable under irradiation. This drawback is overcome by applying a special co-catalyst system consisting of a precious metal core and a Cr{sub 2}O{sub 3} shell on the photocatalysts.

  17. Effects of feeding systems during late pregnancy and post-partum periods on feed intake and milk yield of 50 % Thai Native-Anglo Nubian crossbred does

    Directory of Open Access Journals (Sweden)

    Ngampongsai, W.

    2007-05-01

    Full Text Available The objective of this research was to study the effects of feeding systems on feed intake and milk yield of 50 % Thai Native-Anglo Nubian crossbred does. Twenty four does at 90 days of pregnancy werekept in individual pens and fed Napier grass (Pennisetum purpureum ad libitum. They were alloted to 3 groups of different feeding systems according to a completely randomized design: 1 no supplementedconcentrate during late pregnancy period but supplemented with 14 % crude protein (CP concentrate ad libitum during post-partum period; 2 supplemented with 14% CP concentrate ad libitum both during latepregnancy and post-partum periods; and 3 as group 2 but the concentrate contained 18% CP. Feeding systems significantly (P0.05. They were 865.32; 982.98 and 1,026.60 g/d or 62.27; 66.71 and 68.51 g/BW0.75/d or 1.73; 1.89 and 1.93 %BW, respectively. Similarly, feeding systems were significantly(P0.05. They were 1,599.19; 1,557.44 and 1,682.23g/d or 123.41; 109.22 and 117.17 g/BW0.75/d or 3.57; 3.04 and 3.25 %BW in group 1, 2 and 3 respectively. Feeding systems significantly (P<0.05 affected milk yield of does. Milk yield in weeks 1, 2 and 3 ofgroup 1 (1,043; 1,220 and 1,291 ml/d, respectively was significantly (P<0.05 lower than those of groups 2 and 3 (1,793; 1,964; 1,992 and 1,695; 1,901; 1,729 ml/d, respectively. Does giving twin kids produced significantlyhigher milk yield than single kid does.

  18. Long-term feeding on powdered food causes hyperglycemia and signs of systemic illness in mice.

    Science.gov (United States)

    Tsuchiya, Masahiro; Niijima-Yaoita, Fukie; Yoneda, Hiroyuki; Chiba, Ko; Tsuchiya, Shinobu; Hagiwara, Yoshihiro; Sasaki, Keiichi; Sugawara, Shunji; Endo, Yasuo; Tan-No, Koichi; Watanabe, Makoto

    2014-05-08

    Dietary habits are crucial factors affecting metabolic homeostasis. However, few animal experiments have addressed the effects of long-term feeding with soft food on parameters reflecting systemic health. Using mice, we compared the effects of short (3 days) and long (17 weeks from weaning) feeding periods between powdered food and normal pellet food on the levels of blood glucose, serum levels of insulin, catecholamines, and corticosterone, blood pressure, and/or social interaction behaviors. In addition, the effects of a human glucagon-like peptide-1 analog, liraglutide (a new drug with protective effects against neuronal and cardiovascular diseases), were compared between the powder and pellet groups. (i) Powdered food, even for such a short period, resulted in a greater glycemic response than pellet food, consistent with powdered food being more easily digested and absorbed. (ii) Long-term feeding on powdered food induced hyperglycemia and related systemic signs of illness, including increases in serum adrenaline, noradrenaline, and corticosterone, higher blood pressures (especially diastolic), and increased social interaction behaviors. (iii) Liraglutide, when administered subcutaneously for the last 2 weeks of the 17-week period of feeding, improved these changes (including those in social interaction behaviors). The hyperglycemia associated with long-term powdered-food feeding may lead to certain systemic illness signs, such as elevations of blood glucose, hypertension, and abnormal behaviors in mice. Mastication of food of adequate hardness may be very important for the maintenance of systemic (physical and mental) health, possibly via reduction in the levels of blood glucose and/or adrenal stress hormones (catecholamines and glucocorticoids). Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Basic principles of lead and lead-bismuth eutectic application in blanket of fusion reactors

    International Nuclear Information System (INIS)

    Beznosov, A.V.; Pinaev, S.S.; Muraviev, E.V.; Romanov, P.V.

    2005-01-01

    High magnetohydrodynamic pressure drop is an important issue for liquid metal blanket concepts. To decrease magnetohydrodynamic resistance authors propose to form insulating coatings on internal surface of blanket ducts at any moment of fusion reactor exploitation. It may be achieved easily if lead or lead-bismuth eutectic is used and technology of oxidative potential handling is applied. A number of experiments carried out in NNSTU show the availability of the proposed technology. It bases on formation of the insulating coatings that consist of the oxides of components of the structural materials and of the coolant components. In-situ value of the insulating coatings characteristics ρδ is ∼ 10 -5 Ohm·m 2 for steels and 5,0x10 -6 - 5,0x10 -5 Ohm·m 2 for vanadium alloys. Thermal cycling is possible during exploitation of a blanket. The experimental research of the insulating coatings properties during thermal cycling have shown that the coatings formed into the lead and lead-bismuth coolants save there insulating properties. Experience of many years is an undoubted advantage of the lead-bismuth coolant and less of the lead coolant in comparison with lithium. Russian Federation possesses of experience of exploitation of the research and industrial facilities, of experience of creation of the pumps, steamgenerators and equipment with heavy liquid metal coolants. The unique experience of designing, assembling and exploitation of the fission reactors with lead-bismuth coolant is also available. The problem of technology of lead and lead-bismuth coolants for power high temperature radioactive facilities has been solved. Accidents, emergency situations such as leakage of steamgenerators or depressurization of gas system in facilities with lead and lead-bismuth coolants have been explored and suppressed. (author)

  20. Bismuth Passivation Technique for High-Resolution X-Ray Detectors

    Science.gov (United States)

    Chervenak, James; Hess, Larry

    2013-01-01

    The Athena-plus team requires X-ray sensors with energy resolution of better than one part in 3,000 at 6 keV X-rays. While bismuth is an excellent material for high X-ray stopping power and low heat capacity (for large signal when an X-ray is stopped by the absorber), oxidation of the bismuth surface can lead to electron traps and other effects that degrade the energy resolution. Bismuth oxide reduction and nitride passivation techniques analogous to those used in indium passivation are being applied in a new technique. The technique will enable improved energy resolution and resistance to aging in bismuth-absorber-coupled X-ray sensors. Elemental bismuth is lithographically integrated into X-ray detector circuits. It encounters several steps where the Bi oxidizes. The technology discussed here will remove oxide from the surface of the Bi and replace it with nitridized surface. Removal of the native oxide and passivating to prevent the growth of the oxide will improve detector performance and insulate the detector against future degradation from oxide growth. Placing the Bi coated sensor in a vacuum system, a reduction chemistry in a plasma (nitrogen/hydrogen (N2/H2) + argon) is used to remove the oxide and promote nitridization of the cleaned Bi surface. Once passivated, the Bi will perform as a better X-ray thermalizer since energy will not be trapped in the bismuth oxides on the surface. A simple additional step, which can be added at various stages of the current fabrication process, can then be applied to encapsulate the Bi film. After plasma passivation, the Bi can be capped with a non-diffusive layer of metal or dielectric. A non-superconducting layer is required such as tungsten or tungsten nitride (WNx).

  1. Matching Calculation and Performance Analysis for Aero Engine Starting Air Feeding System

    Science.gov (United States)

    2016-03-30

    Manual (No 14: Auxiliary Power Unit and Starter ), Aviation Industry Press, Beijing, 2000. 3. Meng, W.S., Zhao N. and Ju Y.G., “ Research and...pipeline-air turbine starter (ATS)” system, which has the advantages of flexibility and high efficiency, is investigated based on APU air bleeding...emphatically studied, and principles should be following when designing starting air feeding system are provided. Keywords: air turbine starter

  2. THERMODYNAMICAL ANALYSIS OF HIGH-PRESSURE FEED WATER HEATER IN STEAM PROPULSION SYSTEM DURING EXPLOITATION

    OpenAIRE

    Mrzljak, Vedran; Poljak, Igor; Medica-Viola, Vedran

    2017-01-01

    Nowadays diesel engines prevail as ship propulsion. However, steam propulsion is still primary drive for LNG carriers. In the presented paper high-pressure feed water heater was analyzed, as one of the essential components in LNG carrier steam propulsion system. Measurements of all operating parameters (fluid streams) at the analyzed heat exchanger inlets and outlets were performed. Change of the operating parameters was measured at different steam system loads, not at full load as usual. Thr...

  3. Dynamics of digestive proteolytic system during blood feeding of the hard tick Ixodes ricinus

    Directory of Open Access Journals (Sweden)

    Sojka Daniel

    2010-12-01

    Full Text Available Abstract Background Ticks are vectors of a wide variety of pathogens causing severe diseases in humans and domestic animals. Intestinal digestion of the host blood is an essential process of tick physiology and also a limiting factor for pathogen transmission since the tick gut represents the primary site for pathogen infection and proliferation. Using the model tick Ixodes ricinus, the European Lyme disease vector, we have previously demonstrated by genetic and biochemical analyses that host blood is degraded in the tick gut by a network of acidic peptidases of the aspartic and cysteine classes. Results This study reveals the digestive machinery of the I. ricinus during the course of blood-feeding on the host. The dynamic profiling of concentrations, activities and mRNA expressions of the major digestive enzymes demonstrates that the de novo synthesis of peptidases triggers the dramatic increase of the hemoglobinolytic activity along the feeding period. Overall hemoglobinolysis, as well as the activity of digestive peptidases are negligible at the early stage of feeding, but increase dramatically towards the end of the slow feeding period, reaching maxima in fully fed ticks. This finding contradicts the established opinion that blood digestion is reduced at the end of engorgement. Furthermore, we show that the digestive proteolysis is localized intracellularly throughout the whole duration of feeding. Conclusions Results suggest that the egressing proteolytic system in the early stage of feeding and digestion is a potential target for efficient impairment, most likely by blocking its components via antibodies present in the host blood. Therefore, digestive enzymes are promising candidates for development of novel 'anti-tick' vaccines capable of tick control and even transmission of tick-borne pathogens.

  4. DEVELOPMENT OF METHODS OF CALCULATION OF TRACTION POWER SUPPLY SYSTEMS AND ENERGY SYSTEMS FEEDING THEM

    Directory of Open Access Journals (Sweden)

    I.V. Domanskyi

    2015-08-01

    Full Text Available Currently, the cause deterioration of quality rating of electricity on tire traction substations AC can be either how mode of operation of power systems, industrial loads so and the impact of electric traction. The experience of energy surveys show that the loss from flow potential equalization currents in each the third plot between traction substations AC is amount to not less than 250 thousand kW∙h per year. To select the optimum power and places location of the device longitudinal capacitive of compensation and decision other tasks it is necessary methodology of systems of calculation that takes into account the complex nature of the mutual influence of the quality of the electricity coming from the energy system of and the transportation process. In the paper proposed three options for calculation algorithms modes work of existing and perspective systems, traction power supply AC jointly with power supply their by energy systems, including the algorithm for calculating networks of different nominal voltages using the transformations; decomposition and synthesis of networks with different voltage levels; the iterations and probabilistic assessment of the impact of power mains. Developed the schemes formalization of graphs and the matrices of portions of the outer and traction power supply and method of selecting parameters and places location of the devices longitudinal capacitive of compensation, which are based on direct methods solving systems of linear algebraic equations with a dense banded and profile-sparse the matrix. Are generalized ways of formation and transformation of graphs of schemes traction power supply and feeding them energy systems and proposed the method of calculation the complex the moment of schemes, which increases the accuracy of calculating of flows power on traction networks to 1-2 % and allows you to select the optimal parameters and places location of the devices longitudinal capacitive of compensation

  5. Experiments and simulation of thermal behaviors of the dual-drive servo feed system

    Science.gov (United States)

    Yang, Jun; Mei, Xuesong; Feng, Bin; Zhao, Liang; Ma, Chi; Shi, Hu

    2015-01-01

    The machine tool equipped with the dual-drive servo feed system could realize high feed speed as well as sharp precision. Currently, there is no report about the thermal behaviors of the dual-drive machine, and the current research of the thermal characteristics of machines mainly focuses on steady simulation. To explore the influence of thermal characterizations on the precision of a jib boring machine assembled dual-drive feed system, the thermal equilibrium tests and the research on thermal-mechanical transient behaviors are carried out. A laser interferometer, infrared thermography and a temperature-displacement acquisition system are applied to measure the temperature distribution and thermal deformation at different feed speeds. Subsequently, the finite element method (FEM) is used to analyze the transient thermal behaviors of the boring machine. The complex boundary conditions, such as heat sources and convective heat transfer coefficient, are calculated. Finally, transient variances in temperatures and deformations are compared with the measured values, and the errors between the measurement and the simulation of the temperature and the thermal error are 2 °C and 2.5 μm, respectively. The researching results demonstrate that the FEM model can predict the thermal error and temperature distribution very well under specified operating condition. Moreover, the uneven temperature gradient is due to the asynchronous dual-drive structure that results in thermal deformation. Additionally, the positioning accuracy decreases as the measured point became further away from the motor, and the thermal error and equilibrium period both increase with feed speeds. The research proposes a systematical method to measure and simulate the boring machine transient thermal behaviors.

  6. Fridel-Crafts acylation using bismuth triflate in [BMI][PF6

    DEFF Research Database (Denmark)

    Tran, Phuong Hoang; Duus, Fritz; Le, Thach Ngoc

    2012-01-01

    Bismuth trifluoromethanesulfonate was found to be a good catalyst for the Friedel–Craftsacylation. Bismuthtriflate immobilized in an ionic liquid was the most efficient catalytic system. Bismuthtriflate in [BMI][PF6] catalyzes this reaction under microwave irradiation allowing the rapid synthesis...

  7. Magnetoreflection studies of ion implanted bismuth

    International Nuclear Information System (INIS)

    Nicolini, C.; Chieu, T.C.; Dresselhaus, M.S.; Massachusetts Inst. of Tech., Cambridge; Dresselhaus, G.

    1982-01-01

    The effect of the implantation of Sb ions on the electronic structure of the semimetal bismuth is studied by the magnetoreflection technique. The results show long electronic mean free paths and large implantation-induced increases in the band overlap and L-point band gap. These effects are opposite to those observed for Bi chemically doped with Sb. (author)

  8. On excitation of acoustic plasmons in bismuth

    International Nuclear Information System (INIS)

    Babkin, G.I.; Kravchenko, V.Ya.

    1977-01-01

    The amplitude of the transverse electromagnetic wave penetrating through a bismuth plate under conditions of existence of an acoustic plasma wave is calculated. Two wave coupling mechanisms due to the anisotropy of the carrier spectrum and the carrier drift in the magnetic field of the wave are considered. In the latter case, a wave of double frequency penetrates through the plate

  9. 21 CFR 73.2110 - Bismuth citrate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bismuth citrate. 73.2110 Section 73.2110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR... paragraph (c)(1), effective April 27, 2010. For the convenience of the user, the revised text is set forth...

  10. Preparation and characterization of nanostructured copper bismuth ...

    Indian Academy of Sciences (India)

    Thin films of copper bismuth diselenide were prepared by chemical bath deposition technique onto glass substrate below 60°C. The deposition parameters such as time, temperature of deposition and pH of the solution, were optimized. The set of films having different elemental compositions was prepared by varying Cu/Bi ...

  11. Bismuth phosphates as intermediate temperature proton conductors

    DEFF Research Database (Denmark)

    Huang, Yunjie; Christensen, Erik; Shuai, Qin

    2017-01-01

    Proton conducting electrolyte materials operational in the intermediate temperature range of 200-400 °C are of special interest for applications in fuel cells and water electrolysers. Bismuth phosphates in forms of polycrystalline powders and amorphous glasses are synthesized and investigated...

  12. Photosensitive bismuth ions in lead tungstate

    Czech Academy of Sciences Publication Activity Database

    Vazhenin, V.A.; Potapov, A.P.; Asatryan, G.R.; Nikl, Martin

    2013-01-01

    Roč. 55, č. 4 (2013), s. 803-806 ISSN 1063-7834 Institutional support: RVO:68378271 Keywords : PbWO 4 * single crystal * bismuth * electron paramagnetic resonance Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.782, year: 2013

  13. Long-term effect of feed-in tariffs and carbon taxes on distribution systems

    International Nuclear Information System (INIS)

    Wong, S.; Bhattacharya, K.; Fuller, J.D.

    2010-01-01

    Ontario's deregulated energy sector promotes the production of clean or renewable energy by small power producers through distributed generation (DG). This presentation examined the policies that could be utilized to encourage DG investment and incorporated them into a mathematical model that was used to develop scenarios for examining the economic and environmental supply-side effects of policies on a distribution system over a ten year period. The policies that were analyzed included a combination of feed-in-tariffs; a carbon dioxide tax; and cap-and-trade schemes. The presentation discussed the results in terms of the Ontario electricity market and the standard offer program, implemented on a 32-bus radial distribution system. In addition, the presentation described a distribution system planning model that was suitable for examining the impact of regulatory policies on DG unit investments by small power producers (SPP) or the local distribution company (LDC). Three major policy cases representing a SPP-inclusive environment, a SPP-friendly environment incorporating feed-in tariffs, and a tightly regulated system with only the LDC participating were applied to the 32-bus radial distribution system using market and incentive rates currently in place. It was concluded that without additional incentives, DG units are close to being viable. Feed-in-tariffs, such as that in Ontario, are necessary to increase investments in combined heat and power and solar-photovoltaic units. refs., tabs., figs.

  14. Self-Excited Vibration Analysis for the Feed Support System in FAST

    Directory of Open Access Journals (Sweden)

    Xiaoqiang Tang

    2014-04-01

    Full Text Available China is currently building the largest single dish radio telescope in the world, which is called the Five-hundred meter Aperture Spherical radio Telescope (FAST. The feed support system in the FAST is composed of a cable-driven parallel manipulator, an A-B rotator, and a Stewart platform. Since the stiffness of the cable-driven parallel manipulator is low, the feed support system is prone to vibrate under the action of the Stewart platform. The main purpose of this paper is to study the self-excited vibration of the feed support system. Self-excited vibration involves the natural frequencies of the system and the resultant forces produced by the motion of the Stewart platform. This paper linearizes the dynamic equations of the system at an operating point and determines the configuration-dependent natural frequencies in the given workspace. This paper obtains the resultant forces from the legs due to the motion of the Stewart platform by using the numerical method. According to the natural frequencies and the resultant forces, the condition of self-excited vibration is given and verified by simulations. In order to verify the linearization method, an experimental platform of a cable-driven parallel manipulator is set up. The experimental results match well with the theoretical arithmetic. This paper provides a reference point for further studies on vibration suppression in the FAST.

  15. Bismuth pyrochlore thin films for dielectric energy storage

    International Nuclear Information System (INIS)

    Michael, Elizabeth K.; Trolier-McKinstry, Susan

    2015-01-01

    Thin films of cubic pyrochlore bismuth zinc niobate, bismuth zinc tantalate, and bismuth zinc niobate tantalate were fabricated using chemical solution deposition. This family of materials exhibited moderate relative permittivities between 55 ± 2 and 145 ± 5 for bismuth zinc tantalate and bismuth zinc niobate, respectively, and low loss tangents on the order of 0.0008 ± 0.0001. Increases in the concentration of the tantalum end member increased the dielectric breakdown strength. For example, at 10 kHz, the room temperature breakdown strength of bismuth zinc niobate was 5.1 MV/cm, while that of bismuth zinc tantalate was 6.1 MV/cm. This combination of a high breakdown strength and a moderate permittivity led to a high discharged energy storage density for all film compositions. For example, at a measurement frequency of 10 kHz, bismuth zinc niobate exhibited a maximum recoverable energy storage density of 60.8 ± 2.0 J/cm 3 , while bismuth zinc tantalate exhibited a recoverable energy storage density of 60.7 ± 2.0 J/cm 3 . Intermediate compositions of bismuth zinc niobate tantalate offered higher energy storage densities; at 10 mol. % tantalum, the maximum recoverable energy storage density was ∼66.9 ± 2.4 J/cm 3

  16. The Iodine Satellite (iSat) Propellant Feed System - Design and Demonstration

    Science.gov (United States)

    Polzin, Kurt A.; Seixal, Joao F.; Mauro, Stephanie; Burt, Adam O.; Martinez, Armando; Peeples, Steven R.

    2017-01-01

    CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload, providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cm3 and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high Delta V maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. One of the systems under development to support such a technology is the propellant feed system, which must be capable of storing solid iodine propellant, applying heat to sublime the stored solid into the vapor phase, and then control the flow of low-pressure gaseous iodine to both the thruster and cathode. In a test conducted in 2016, a first-generation iodine propellant feed system was integrated with a cathode and Hall thruster. While this test had to be terminated, the feed system in this first test was able to support both cathode and integrated cathode and thruster operation prior to the termination of the test. In the present paper, we describe work performed since that initial integrated test. The effort uses lessons learned from the previous integrated test, retiring risk associated with the iodine propellant feed system, answering open design-space questions, and demonstrating iodine flow control in an integrated system. The work is undertaken at both the component level and then at the integrated subsystem level to systematically improve the feed system design, improving the hardware fidelity so the appearance and operation of the

  17. FEED SYSTEM INNOVATION FOR GASIFICATION OF LOCALLY ECONOMICAL ALTERNATIVE FUELS (FIGLEAF)

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Swanson; Mark A. Musich; Darren D. Schmidt; Joseph K. Schultz

    2003-02-01

    The Feed System Innovation for Gasification of Locally Economical Alternative Fuels (FIGLEAF) project was conducted by the Energy & Environmental Research Center and Gasification Engineering Corporation of Houston, Texas (a subsidiary of Global Energy Inc., Cincinnati, Ohio), with 80% cofunding from the U.S. Department of Energy (DOE). The goal of the project was to identify and evaluate low-value fuels that could serve as alternative feedstocks and to develop a feed system to facilitate their use in integrated gasification combined-cycle and gasification coproduction facilities. The long-term goal, to be accomplished in a subsequent project, is to install a feed system for the selected fuel(s) at Global Energy's commercial-scale 262-MW Wabash River Coal Gasification Facility in West Terre Haute, Indiana. The feasibility study undertaken for the project consisted of identifying and evaluating the economic feasibility of potential fuel sources, developing a feed system design capable of providing a fuel at 400 psig to the second stage of the E-Gas (Destec) gasifier to be cogasified with coal, performing bench- and pilot-scale testing to verify concepts and clarify decision-based options, reviewing information on high-pressure feed system designs, and determining the economics of cofeeding alternative feedstocks with the conceptual feed system design. A preliminary assessment of feedstock availability within Indiana and Illinois was conducted. Feedstocks evaluated included those with potential tipping fees to offset processing cost: sewage sludge, municipal solid waste, used railroad ties, urban wood waste (UWW), and used tires/tire-derived fuel. Agricultural residues and dedicated energy crop fuels were not considered since they would have a net positive cost to the plant. Based on the feedstock assessment, sewage sludge was selected as the primary feedstock for consideration at the Wabash River Plant. Because of the limited waste heat available for drying and

  18. Establishment of an Artificial Tick Feeding System to Study Theileria lestoquardi Infection.

    Directory of Open Access Journals (Sweden)

    Shahin Tajeri

    Full Text Available The establishment of good experimental models for Theileria sp. infection is important for theileriosis research. Routinely, infection of ticks is accomplished by feeding on parasite-infected animals (sheep, cows and horses, which raises practical and ethical problems, driving the search for alternative methods of tick infection. Artificial tick feeding systems are based mainly on rearing ticks on host-derived or hand-made artificial membranes. We developed a modified feeding assay for infecting nymphal stages of Hyalomma anatolicum ticks with Theileria lestoquardi, a highly pathogenic parasite of sheep. We compared two different membranes: an artificial silicone membrane and a natural alternative using mouse skin. We observed high attachment rates with mouse skin, whereas in vitro feeding of H. anatolicum nymphs on silicone membranes was unsuccessful. We could infect H. anatolicum nymphs with T. lestoquardi and the emerging adult ticks transmitted infective parasites to sheep. In contrast, similar infections with Rhipicephalus bursa, a representative tick with short mouth-parts that was proposed as a vector for T. lestoquardi, appeared not to be a competent vector tick species. This is the first report of an experimentally controlled infection of H. anatolicum with T. lestoquardi and opens avenues to explore tick-parasite dynamics in detail.

  19. Meat production in sheep hybrids in agro-ecological feeding and growing system

    Directory of Open Access Journals (Sweden)

    Maria Sauer

    2014-10-01

    Full Text Available Research points out the effect of feeding young hybrid sheep (Black-faced German x Ţurcană in the conditions of permanent hill grasslands with two technological systems of improving grasslands: the conventional chemical (NPK fertilisation system and the agro-ecological organic fertilisation (sheep folding and over-sowing system. Studies show that the changes in the floristic structure of the grasslands have influenced both fodder yield and quality and meat production and quality. Meat production depending on experimental factors ranged between 189 and 393 kg/ha in the grasslands improved conventionally and between 191 and 461 kg/ha in the grasslands fertilised organically.

  20. Feeding induced by cannabinoids is mediated independently of the melanocortin system.

    Directory of Open Access Journals (Sweden)

    Puspha Sinnayah

    2008-05-01

    Full Text Available Cannabinoids, the active components of marijuana, stimulate appetite, and cannabinoid receptor-1 (CB1-R antagonists suppress appetite and promote weight loss. Little is known about how CB1-R antagonists affect the central neurocircuitry, specifically the melanocortin system that regulates energy balance.Here, we show that peripherally administered CB1-R antagonist (AM251 or agonist equally suppressed or stimulated feeding respectively in A(y , which lack a functional melanocortin system, and wildtype mice, demonstrating that cannabinoid effects on feeding do not require melanocortin circuitry. CB1-R antagonist or agonist administered into the ventral tegmental area (VTA equally suppressed or stimulated feeding respectively, in both genotypes. In addition, peripheral and central cannabinoid administration similarly induced c-Fos activation in brain sites suggesting mediation via motivational dopaminergic circuitry. Amperometry-detected increases in evoked dopamine (DA release by the CB1-R antagonist in nucleus accumbens slices indicates that AM251 modulates DA release from VTA terminals.Our results demonstrate that the effects of cannabinoids on energy balance are independent of hypothalamic melanocortin circuitry and is primarily driven by the reward system.

  1. Biofouling Control in Spiral-Wound Membrane Systems: Impact of Feed Spacer Modification and Biocides

    KAUST Repository

    Siddiqui, Amber

    2016-12-01

    High-quality drinking water can be produced with membrane-based filtration processes like reverse osmosis and nanofiltration. One of the major problems in these membrane systems is biofouling that reduces the membrane performance, increasing operational costs. Current biofouling control strategies such as pre-treatment, membrane modification, and chemical cleaning are not sufficient in all cases. Feed spacers are thin (0.8 mm), complex geometry meshes that separate membranes in a module. The main objective of this research was to evaluate whether feed spacer modification is a suitable strategy to control biofouling. Membrane fouling simulator studies with six feed spacers showed differences in biofouled spacer performance, concluding that (i) spacer geometry influences biofouling impact and (ii) biofouling studies are essential for evaluation of spacer biofouling impact. Computed tomography (CT) was found as a suitable technique to obtain three-dimensional (3D) measurements of spacers, enabling more representative mathematical modeling of hydraulic behavior of spacers in membrane systems. A strategy for developing, characterizing, and testing of spacers by numerical modeling, 3D printing of spacers and experimental membrane fouling simulator studies was developed. The combination of modeling and experimental testing of 3D printed spacers is a promising strategy to develop advanced spacers aiming to reduce the impact of biofilm formation on membrane performance and to improve the cleanability of spiral-wound membrane systems.

  2. Optimization of steel casting feeding system based on BP neural network and genetic algorithm

    Directory of Open Access Journals (Sweden)

    Xue-dan Gong

    2016-05-01

    Full Text Available The trial-and-error method is widely used for the current optimization of the steel casting feeding system, which is highly random, subjective and thus inefficient. In the present work, both the theoretical and the experimental research on the modeling and optimization methods of the process are studied. An approximate alternative model is established based on the Back Propagation (BP neural network and experimental design. The process parameters of the feeding system are taken as the input, the volumes of shrinkage cavities and porosities calculated by simulation are simultaneously taken as the output. Thus, a mathematical model is established by the BP neural network to combine the input variables with the output response. Then, this model is optimized by the nonlinear optimization function of the genetic algorithm. Finally, a feeding system optimization of a steel traveling wheel is conducted. No shrinkage cavities and porosities are induced through the optimization. Compared to the initial design scheme, the process yield is increased by 4.1% and the volume of the riser is decreased by 5.48×106 mm3.

  3. Feeding and wounding responses in Hydra suggest functional and structural polarization of the tentacle nervous system.

    Science.gov (United States)

    Shimizu, H

    2002-03-01

    The nervous system of Hydra, a freshwater cnidaria, occurs as dispersed, or diffuse, nerve net throughout the animal. It is widely accepted that in a diffuse nervous system an external stimulus is conducted in all directions over the net. Here I report observations that hydra tentacles respond to feeding and wounding stimuli in a unidirectional manner. Upon contact of a tentacle with a brine shrimp larva during feeding, tissue on the proximal side of the point of contact contracted strongly, whereas tissue on the distal side contracted only very weakly. Feeding a tentacle to which a second tentacle was grafted to the proximal end in the reversed orientation showed that unidirectional conduction, once initiated, was blocked by the reversal of polarity, demonstrating that the distal to proximal polarity of tissue is crucial for unidirectional conduction. Unidirectional conduction was obtained also by mechanically pinching the tissue. The response of tentacles devoid of neurons examined was bidirectional, demonstrating that the nervous system is responsible for the unidirectional responses. These observations suggest that polarized property of the nerve net in hydra tentacles is responsible for the unidirectional tentacle contraction.

  4. Scoping Studies to Evaluate the Benefits of an Advanced Dry Feed System on the Use of Low-Rank Coal

    Energy Technology Data Exchange (ETDEWEB)

    Rader, Jeff; Aguilar, Kelly; Aldred, Derek; Chadwick, Ronald; Conchieri,; Dara, Satyadileep; Henson, Victor; Leininger, Tom; Liber, Pawel; Nakazono, Benito; Pan, Edward; Ramirez, Jennifer; Stevenson, John; Venkatraman, Vignesh

    2012-11-30

    This report describes the development of the design of an advanced dry feed system that was carried out under Task 4.0 of Cooperative Agreement DE-FE0007902 with the US DOE, “Scoping Studies to Evaluate the Benefits of an Advanced Dry Feed System on the use of Low- Rank Coal.” The resulting design will be used for the advanced technology IGCC case with 90% carbon capture for sequestration to be developed under Task 5.0 of the same agreement. The scope of work covered coal preparation and feeding up through the gasifier injector. Subcomponents have been broken down into feed preparation (including grinding and drying), low pressure conveyance, pressurization, high pressure conveyance, and injection. Pressurization of the coal feed is done using Posimetric1 Feeders sized for the application. In addition, a secondary feed system is described for preparing and feeding slag additive and recycle fines to the gasifier injector. This report includes information on the basis for the design, requirements for down selection of the key technologies used, the down selection methodology and the final, down selected design for the Posimetric Feed System, or PFS.

  5. Scoping Studies to Evaluate the Benefits of an Advanced Dry Feed System on the Use of Low-Rank Coal

    Energy Technology Data Exchange (ETDEWEB)

    Rader, Jeff; Aguilar, Kelly; Aldred, Derek; Chadwick, Ronald; Conchieri, John; Dara, Satyadileep; Henson, Victor; Leininger, Tom; Liber, Pawel; Liber, Pawel; Lopez-Nakazono, Benito; Pan, Edward; Ramirez, Jennifer; Stevenson, John; Venkatraman, Vignesh

    2012-03-30

    The purpose of this project was to evaluate the ability of advanced low rank coal gasification technology to cause a significant reduction in the COE for IGCC power plants with 90% carbon capture and sequestration compared with the COE for similarly configured IGCC plants using conventional low rank coal gasification technology. GE’s advanced low rank coal gasification technology uses the Posimetric Feed System, a new dry coal feed system based on GE’s proprietary Posimetric Feeder. In order to demonstrate the performance and economic benefits of the Posimetric Feeder in lowering the cost of low rank coal-fired IGCC power with carbon capture, two case studies were completed. In the Base Case, the gasifier was fed a dilute slurry of Montana Rosebud PRB coal using GE’s conventional slurry feed system. In the Advanced Technology Case, the slurry feed system was replaced with the Posimetric Feed system. The process configurations of both cases were kept the same, to the extent possible, in order to highlight the benefit of substituting the Posimetric Feed System for the slurry feed system.

  6. Current and potential applications of bismuth-based drugs.

    Science.gov (United States)

    Keogan, Donal M; Griffith, Darren M

    2014-09-23

    : Bismuth compounds have been used extensively as medicines and in particular for the treatment of gastrointestinal ailments. In addition to bismuth's well known gastroprotective effects and efficacy in treating H. pylori infection it also has broad anti-microbial, anti-leishmanial and anti-cancer properties. Aspects of the biological chemistry of bismuth are discussed and biomolecular targets associated with bismuth treatment are highlighted. This review strives to provide the reader with an up to date account of bismuth-based drugs currently used to treat patients and discuss potential medicinal applications of bismuth drugs with reference to recent developments in the literature. Ultimately this review aims to encourage original contributions to this exciting and important field.

  7. Technical note: validation of a system for monitoring individual feeding and drinking behavior and intake in group-housed cattle.

    Science.gov (United States)

    Chapinal, N; Veira, D M; Weary, D M; von Keyserlingk, M A G

    2007-12-01

    The objective of this study was to validate a system for monitoring individual feeding and drinking behavior and intake in group-housed cattle. A total of 42 Holstein cows were tested with access to 24 feed bins and 4 water bins. For the purposes of this validation experiment, we focused our observations on 4 water bins and 13 feed bins. When the cow approached the feed or water bin, an antenna detected the cow's unique passive transponder and lowered the barrier, allowing the cow access to the feed or water. For each visit to the bin, the system recorded the cow number, bin number, initial and final times and weight and calculated the visit duration and intake. Bins were also monitored by direct observation and time-lapse video recording for 2 d per bin, with observations for 4 and 6 h/d for the feed and water bins, respectively. Data from direct observations were compared with the electronic data recorded by the system. Feed disappearance over 24 h was assessed by using an external scale over 3 consecutive 24-h periods, and these values were compared with the sum of intakes across all visits to that bin for the same time periods. The system showed a high specificity (100%) and sensitivity (100 and 99.76% for the feed and water bins, respectively) for cow identification. The duration of the feeding and drinking visits and the feed and water intake per visit, as estimated by the monitoring system, were highly correlated with those obtained by direct observation (R(2) >/= 0.99 in all the cases). The comparison of the total feed that disappeared from each bin in 24 h with the sum of the feed cows consumed from that bin during the same period differed by less than 1 kg (29.92 +/- 0.90 kg and 29.24 +/- 0.90 kg as estimated by manual weighing and by the electronic system, respectively). This difference could be attributed to changes in feed moisture during the 24-h period. In conclusion, this electronic system is a useful tool for monitoring intakes and feeding and

  8. Angle Dependence of the Orbital Magnetoresistance in Bismuth

    Directory of Open Access Journals (Sweden)

    Aurélie Collaudin

    2015-06-01

    Full Text Available We present an extensive study of angle-dependent transverse magnetoresistance in bismuth, with a magnetic field perpendicular to the applied electric current and rotating in three distinct crystallographic planes. The observed angular oscillations are confronted with the expectations of semiclassic transport theory for a multivalley system with anisotropic mobility and the agreement allows us to quantify the components of the mobility tensor for both electrons and holes. A quadratic temperature dependence is resolved. As Hartman argued long ago, this indicates that inelastic resistivity in bismuth is dominated by carrier-carrier scattering. At low temperature and high magnetic field, the threefold symmetry of the lattice is suddenly lost. Specifically, a 2π/3 rotation of magnetic field around the trigonal axis modifies the amplitude of the magnetoresistance below a field-dependent temperature. By following the evolution of this anomaly as a function of temperature and magnetic field, we map the boundary in the (field, temperature plane separating two electronic states. In the less symmetric state, confined to low temperature and high magnetic field, the three Dirac valleys cease to be rotationally invariant. We discuss the possible origins of this spontaneous valley polarization, including a valley-nematic scenario.

  9. Bismuth Silver Oxysulfide for Photoconversion Applications: Structural and Optoelectronic Properties

    KAUST Repository

    Baqais, Amal Ali Abdulallh

    2017-09-18

    Single-phase bismuth silver oxysulfide, BiAgOS, was prepared by a hydrothermal method. Its structural, morphological and optoelectronic properties were investigated and compared with bismuth copper oxysulfide (BiCuOS). Rietveld refinement of the powder X-ray diffraction (XRD) measurements revealed that the BiAgOS and BiCuOS crystals have the same structure as ZrSiCuAs: the tetragonal space group P4/nmm. X-ray photoelectron spectroscopy (XPS) analyses confirmed that the BiAgOS has a high purity, in contrast with BiCuOS, which tends to have Cu vacancies. The Ag has a monovalent oxidation state, whereas Cu is present in the oxidation states of +1 and +2 in the BiCuOS system. Combined with experimental measurements, density functional theory calculations employing the range-separated hybrid HSE06 exchange-correlation functional with spin-orbit coupling quantitatively elucidated photophysical properties such as ab-sorption coefficients, effective masses and dielectric constants. BiCuOS and BiAgOS were found to have indirect bandgaps of 1.1 and 1.5 eV, respectively. Both possess high dielectric constants and low electron and hole effective masses. Therefore, these materials are expected to have high exciton dissociation capabilities and excellent carrier diffusion properties. This study reveals that BiAgOS is a promising candidate for photoconversion applications.

  10. Bismuth(III) dialkyldithiophosphates: Facile single source precursors for the preparation of bismuth sulfide nanorods and bismuth phosphate thin films

    International Nuclear Information System (INIS)

    Biswal, Jasmine B.; Garje, Shivram S.; Nuwad, Jitendra; Pillai, C.G.S.

    2013-01-01

    Two different phase pure materials (Bi 2 S 3 and Bi 2 P 4 O 13 ) have been prepared under different conditions using the same single source precursors. Solvothermal decomposition of the complexes, Bi(S 2 P(OR) 2 ) 3 [where, R=Methyl (Me) (1), Ethyl (Et) (2), n-Propyl (Pr n ) (3) and iso-Propyl (Pr i ) (4)] in ethylene glycol gave orthorhombic bismuth sulfide nanorods, whereas aerosol assisted chemical vapor deposition (AACVD) of the same precursors deposited monoclinic bismuth tetraphosphate (Bi 2 P 4 O 13 ) thin films on glass substrates. Surface study of the thin films using SEM illustrated the formation of variety of nanoscale morphologies (spherical-, wire-, pendent-, doughnut- and flower-like) at different temperatures. AFM studies were carried out to evaluate quality of the films in terms of uniformity and roughness. Thin films of average roughness as low as 1.4 nm were deposited using these precursors. Photoluminescence studies of Bi 2 P 4 O 13 thin films were also carried out. - Graphical abstract: Solvothermal decomposition of bismuth(III) dialkyldithiophosphates in ethylene glycol gave Bi 2 S 3 nanoparticles, whereas aerosol assisted chemical vapor deposition of these single source precursors deposited Bi 2 P 4 O 13 thin films. Display Omitted - Highlights: • Preparation of phase pure orthorhombic Bi 2 S 3 nanorods and monoclinic Bi 2 P 4 O 13 thin films. • Use of single source precursors for deposition of bismuth phosphate thin films. • Use of solvothermal decomposition and AACVD methods. • Morphology controlled synthesis of Bi 2 P 4 O 13 thin films. • Bi 2 S 3 nanorods and Bi 2 P 4 O 13 thin films using same single source precursors

  11. Liquid over-feeding refrigeration system and method with integrated accumulator-expander-heat exchanger

    Science.gov (United States)

    Mei, V.C.; Chen, F.C.

    1997-04-22

    A refrigeration system is described having a vapor compression cycle utilizing a liquid over-feeding operation with an integrated accumulator-expander-heat exchanger. Hot, high-pressure liquid refrigerant from the condenser passes through one or more lengths of capillary tubing substantially immersed in a pool liquid refrigerant in the accumulator-expander-heat exchanger for simultaneously sub-cooling and expanding the liquid refrigerant while vaporizing liquid refrigerant from the pool for the return thereof to the compressor as saturated vapor. The sub-cooling of the expanded liquid provides for the flow of liquid refrigerant into the evaporator for liquid over-feeding the evaporator and thereby increasing the efficiency of the evaporation cycle. 4 figs.

  12. Design and development of graphite/epoxy feed line for use of cryogenic propulsion systems

    International Nuclear Information System (INIS)

    Kremer, J.S.; Kreiner, J.H.; Mosallam, A.S.

    1998-01-01

    The development of lightweight composite cryogenic ines is a critical technology for single-stage-to-orbit launch vehicles such as the Reusable Launch Vehicle (RLV). To achieve weight goals, a significant effort will be required to develop feed line designs that can reliably replace today's stainless steel configurations. A number of technical problems exist, including the large coefficient of thermal expansion (CTE) differential between the composite and interfacing metallic materials and the ability to seal against composite materials in a cryogenic environment. This paper reports the results of a development efforts undertaken to design, build, and test a graphite/epoxy propellant feed line to carry liquid hydrogen (-423 degree F). The design incorporates a reusable cryogenic insulation system and a secondarily bonded/co-cured splice joint

  13. Alternatives generation and analysis for the Phase I intermediate waste feed staging system design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Claghorn, R.D., Fluor Daniel Hanford

    1997-02-06

    This alternatives generation and analysis (AGA) addresses the question: What is the design basis for the facilities required to stage low-level waste (LLW) feed to the Phase I private contractors? Alternative designs for the intermediate waste feed staging system were developed, analyzed, and compared. Based on these analyses, this document recommends installing mixer pumps in the central pump pit of double-shell tanks 241-AP-102 and 241-AP-104. Also recommended is installing decant/transfer pumps at these tanks. These recommendations have clear advantages in that they provide a low shedule impact/risk and the highest operability of all the alternatives investigated. This revision incorporates comments from the decision board.

  14. Combined isovalent alloying gallium arsenide with bismuth and indium

    International Nuclear Information System (INIS)

    Vorob'eva, V.V.; Zushinskaya, O.V.; Novikov, S.V.; Savel'ev, I.G.; Chaldyshev, V.V.

    1989-01-01

    Electric conductivity and the Hall effect at 77 and 300K of gallium arsenide epitaxial films grown from the melted solution with bismuth and indium additions at 77 and 300K. Different mechanisms of bismuth and indium effect on the ensamble of defects and background addition in gallium arsenide, are established. Bismuth effect is conditioned by the change of liquid phase properties, and indium effect is conditioned by the processes taking place in a crystal. The experimental results have shown that the mutual alloying of gallium arsenide with indium and bismuth in the process of liquid-phase epitaxy ensures high electrophysical film properties

  15. Government information systems to monitor complementary feeding programs for young children.

    Science.gov (United States)

    Jefferds, Maria Elena D

    2017-10-01

    Accelerating progress to improve complementary feeding of young children is a global priority. Strengthening monitoring through government information systems may increase the quality and implementation of infant and young child feeding (IYCF) programs. Monitoring is necessary for the effective implementation of programs as it allows program managers to assess program performance, identify problems, and take corrective action. Program descriptions and conceptual models explain how program inputs and activities should lead to outputs and outcomes, and ultimately public health impact; thus, they are critical tools when designing effective IYCF programs and monitoring systems as these descriptions and conceptual models form the basis for the program and are key for developing the monitoring system, indicators, and tools. Despite their importance, many programs do not have these documented, nor monitoring plans, limiting their ability to design effective programs and monitoring systems. Once in place, it is important to periodically review the monitoring system to confirm it still appropriately meets stakeholder needs and the data are being used to inform decision-making, and to make program adjustments as the monitoring focus, resources, or capacity may change during the program lifecycle. Including priority indicators of IYCF practices and counseling indicators in the government information systems may strengthen IYCF programs when the indicators are contextualized to the government IYCF program, capacity, and setting, and the indicators are used for decision-making and program improvement. © Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  16. Iodine Hall Thruster Propellant Feed System for a CubeSat

    Science.gov (United States)

    Polzin, Kurt A.

    2014-01-01

    There has been significant work recently in the development of iodine-fed Hall thrusters for in-space propulsion applications.1 The use of iodine as a propellant provides many advantages over present xenon-gas-fed Hall thruster systems. Iodine is a solid at ambient temperature (no pressurization required) and has no special handling requirements, making it safe for secondary flight opportunities. It has exceptionally high ?I sp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing system level advantages over mid-term high power electric propulsion options. Iodine provides thrust and efficiency that are comparable to xenonfed Hall thrusters while operating in the same discharge current and voltage regime, making it possible to leverage the development of flight-qualified xenon Hall thruster power processing units for the iodine application. Work at MSFC is presently aimed at designing, integrating, and demonstrating a flight-like iodine feed system suitable for the Hall thruster application. This effort represents a significant advancement in state-of-the-art. Though Iodine thrusters have demonstrated high performance with mission enabling potential, a flight-like feed system has never been demonstrated and iodine compatible components do not yet exist. Presented in this paper is the end-to-end integrated feed system demonstration. The system includes a propellant tank with active feedback-control heating, fill and drain interfaces, latching and proportional flow control valves (PFCV), flow resistors, and flight-like CubeSat power and control electronics. Hardware is integrated into a CubeSat-sized structure, calibrated and tested under vacuum conditions, and operated under under hot-fire conditions using a Busek BHT-200 thruster designed for iodine. Performance of the system is evaluated thorugh accurate measurement of thrust and a calibrated of mass flow rate measurement, which is a function of

  17. Coating compositions comprising bismuth-alloyed zinc

    DEFF Research Database (Denmark)

    2008-01-01

    The present application discloses (i) a coating composition comprising a particulate zinc-based alloyed material, said material comprising 0.05-0.7% by weight of bismuth (Bi), the D50 of the particulate material being in the range of 2.5-30 µm; (ii) a coated structure comprising a metal structure......, wherein the material comprises 0.05-0.7%(w/w) of bismuth (Bi), and wherein the D50 of the particulate material is in the range of 2.5-30 µm; (iv) a composite powder consisting of at least 25%(w/w) of the particulate zinc-based alloyed material, the rest being a particulate material consisting of zinc...

  18. Effect of different feeding strategies in intensive dairy farming systems on milk fatty acid profiles, and implications on feeding costs in Italy.

    Science.gov (United States)

    Borreani, G; Coppa, M; Revello-Chion, A; Comino, L; Giaccone, D; Ferlay, A; Tabacco, E

    2013-01-01

    The aim of this work was to characterize the fatty acid (FA) profile of milk from intensive dairy farming systems in the Po Plain (Italy) to estimate the costs of the adopted feeding strategies and to simulate the effect of supplementary premiums on the basis of milk FA composition on milk income. Twenty dairy farms with 5 different feeding strategies were studied: 3 corn silage-based systems in which cows were supplemented with a great proportion (CCH), a medium proportion (CCM), or without commercial concentrate mix (CC0), and 2 systems in which part of corn silage was replaced with grass or legume silage (HF) or with fresh herbage (G), cut and fed indoors. Bulk milk was sampled and lactating cow performance, feeding strategies and forage characteristics were recorded through a survey, 3 times during a year. The milk FA supplementary premium was calculated considering C18:3n-3 and saturated FA (SFA) concentrations, and ratio of total cis C18:1 isomers to C16:0. The CCH, CCM, and CC0 systems bought most of their dairy cow feeds off farm, which allowed them to increase milk production to 35,000 L/yr per hectare. Their low dry matter and crude protein self-sufficiency led to higher feeding costs per liter of milk (from €0.158 to €0.184), and highest income over feed cost was achieved only for milk yield performance greater than 10,000 kg/cow per year. The use of homegrown forages in HF and G increased dry matter and crude protein self-sufficiency and reduced the feeding costs per liter of milk from 9 to 22%, compared with the other studied systems, making HF and G feeding economically competitive, even for a lower milk yield per cow. The studied systems highlighted a remarkable variation in FA profiles. The concentrations of C16:0 and SFA were the highest in CCH (31.53 and 67.84 g/100g of FA) and G (31.23 and 68.45 g/100g of FA), because of the larger proportion of commercial concentrate mix in the cow diet. The concentrations of C16:0 and SFA were the lowest in

  19. Electrocatalytic activity of bismuth doped silver electrodes

    CERN Document Server

    Amjad, M

    2002-01-01

    Investigation of redox reactions on silver, and bismuth doped silver electrodes in aqueous KOH solutions, by using potentiostatic steady-state polarization technique, has been carried out. The redox wave potential and current displacements along with multiplicity of the latter have been examined. These electrodes were employed for the oxidation of organic molecules such as ethylamine in alkaline media. Subsequently, these electrodes were ranked with respect to their activity for the redox reactions. (author)

  20. "Chemical contraction" in rubidium-bismuth melts

    Science.gov (United States)

    Khairulin, R. A.; Abdullaev, R. N.; Stankus, S. V.

    2017-10-01

    The density and thermal expansion of liquid rubidium and rubidium-bismuth alloy containing 25.0 at % Bi were measured by the gamma-ray attenuation technique at temperatures from liquidus to 1000 K. The results of this study were compared with the data obtained by other authors. The molar volume of the Rb75Bi25 melt strongly deviates from the additivity rule for ideal solutions.

  1. Nutritional, technological and managerial parameters for precision feeding to enhance feed nutrient utilization and productivity in different dairy cattle production systems

    DEFF Research Database (Denmark)

    van Empel, Mireille JM; Makkar, Harinder PS; Dijkstra, Jan

    2016-01-01

    on precision feeding (PF) and the relevance of PF approaches in dairy cattle production systems in developing countries. The concept of PF aims at achieving balanced nutrition (matching animal requirements with nutrient supply, preferably from locally available feed resources) to improve animal productivity...... increased farmer income. In view of large variation in forage quality, rapid determination of nutrient composition of forage on site is indispensable in PF of dairy cattle. The relevance of application of the elaborate approaches for intensive, mixed crop-livestock, mixed extensive and extensive systems...... and to reduce both the cost of production and environmental pollution. In addition to the supply of proper amounts of nutrients to the dairy cow using various methodologies and tools, approaches that enhance overall nutrient digestion and availability to the animal are also discussed as an integral part of PF...

  2. Cost and optimal feed-in tariff for small scale photovoltaic systems in China

    International Nuclear Information System (INIS)

    Rigter, Jasper; Vidican, Georgeta

    2010-01-01

    China has recently become a dominant player in the solar photovoltaic (PV) industry, producing more than one-third of the global supply of solar cells in 2008. However, as of 2008, less than 1% of global installations were based in China. Recently, the government has stated its grand ambitions of expanding the share of electricity derived from solar power. As part of this initiative, policy makers are currently in the process of drafting a feed-in tariff policy to support the development of the solar energy market. In this paper, we aim to calculate what the level of such a tariff should be. We develop a closed form equation for the cost of PV, and use forecasts on prices of solar systems to derive an optimal feed-in tariff, including a digression rate. The focus is on the potential of residential and small scale commercial solar PV installations. We show that the cost of small scale PV in China has decreased rapidly during the period 2005-2009. Our analysis also shows that optimal feed-in tariffs vary widely between regions within China, and that grid parity could be reached in large parts of the country depending on the expected escalation in electricity prices.

  3. LAMB FEEDING STRATEGIES DURING THE PRE-WEANING PERIOD IN INTENSIVE MEAT PRODUCTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Stela Antas Urbano

    2017-05-01

    Full Text Available The modern consumer of sheep meat requires uninterrupted market supply with qualitatively standardized meat, without excess fat and with high tenderness, which has encouraged producers to slaughter young sheep. A lamb’s diet during the pre-weaning phase was discussed in this review because it is of great importance for achieving success in a meat production system, given the high speed of lambs’ growth during their first weeks of life. Supplying palatable concentrate in creep-feeders from the first days of life promotes pre-stomach development and adapts the animal to a solid diet consumption; important processes for enhancing animal performance, since nutritional requirements, especially for energy, are high during this period and can only be met by milk for a short time. An early weaning technique can be adopted from 35 days old, when adequate nutritional support is provided. Unweaned lamb slaughtering combined with creep feeding and controlled feeding have superior effects to early abrupt weaning, probably by avoiding the adverse effects generated by post-weaning stress. The use of a milk replacer is seldom reported due to the difficulty in finding specific products for sheep and its high cost. Controlled suckling does not affect the performance of lambs. Further studies investigating lamb feeding strategies need to be developed during the pre-weaning period.

  4. Advanced Numerical Tools for Design and Analysis of In-Space, Valve and Feed Systems, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In-space valves for the main fuel and oxidizer feed systems are required to provide precise control, wide throttling range and handle rapid on-off control. These...

  5. Solar Water Splitting and Nitrogen Fixation with Layered Bismuth Oxyhalides.

    Science.gov (United States)

    Li, Jie; Li, Hao; Zhan, Guangming; Zhang, Lizhi

    2017-01-17

    precisely channeling their migration from the bulk to the surface along the different directions, thus enabling more electrons to reach the surface for water splitting and nitrogen fixation. Simultaneously, their oxygen termination feature and the strain differences between interlayers and intralayers render the easy generation of surface oxygen vacancies (OVs) that afford Lewis-base and unsaturated-unsaturated sites for nitrogen activation. With these rationales as the guideline, we can obtain striking visible-light hydrogen- and ammonia-evolving rates without using any noble-metal cocatalysts. Then we show how to utilize IEF and OV based strategies to improve the solar water splitting and nitrogen fixation performances of bismuth oxyhalide photocatalysts. Finally, we highlight the challenges remaining in using bismuth oxyhalides for solar hydrogen and ammonia syntheses, and the prospect of further development of this research field. We believe that our mechanistic insights could serve as a blueprint for the design of more efficient solar water splitting and nitrogen fixation systems, and layered bismuth oxyhalides might open up new photocatalyst paradigm for such two solar chemical syntheses.

  6. The choice of animal feeding system influences fatty acid intakes of the average French diet

    Directory of Open Access Journals (Sweden)

    Schmitt Bernard

    2018-03-01

    Full Text Available Fatty acids intake of French adult population does not comply with the French Population Reference Intakes (PRI. The aim the study is to quantify the impact of a modification of animal feeding system on the fatty acids intake of French population. A 15-day diet representative of average consumption for the French adult male population was developed with animal products derived either from conventional production system (STD either from a specific production system (Bleu-Blanc-Cœur® [BBC] that acts on the fatty acids profile of animal products. The impact of a such change in feeding system on fatty acids content has been quantified. BBC diet contributes to reducing the gap between the fatty acid content of a STD diet and the PRI with highest impact on C12:0–14:0–16:0 fatty acids (−4.6 g/d, i.e. 63.3%, C18:3n-3 (+0.8 g/d, i.e. 48.2%, C20:5n-3 (+35 mg/d, i.e. 42.7%, C22:6n-3 (+49 mg/d, i.e. 35% and the C18:2n-6/C18:3n-3 ratio (−4.9 points, i.e. 43.5%. The research also shows that animal products complement one another. Consuming a variety of animal source foods derived from a specific feeding practices could help reduce the gap between actual consumption and recommended dietary intake of fatty acids.

  7. FEED SYSTEM INNOVATION FOR GASIFICATION OF LOCALLY ECONOMICAL ALTERNATIVE FUELS (FIGLEAF)

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Swanson; Mark A. Musich; Darren D. Schmidt

    2001-11-01

    The Feed System Innovation for Gasification of Locally Economical Alternative Fuels (FIGLEAF) project is being conducted by the Energy and Environmental Research Center and Gasification Engineering Corporation of Houston, Texas (a subsidiary of Global Energy Inc., Cincinnati, Ohio), with 80% cofunding from the U.S. Department of Energy. The goal of the project is to identify and evaluate low-value fuels that could serve as alternative feedstocks and to develop a feed system to facilitate their use in integrated gasification combined cycle and gasification coproduction facilities. The long-term goal, to be accomplished in a subsequent project, is to install a feed system for the selected fuels at Global Energy's commercial-scale 262-MW Wabash River Coal Gasification Facility in West Terre Haute, Indiana. The feasibility study undertaken for the project consists of identifying and evaluating the economic feasibility of potential fuel sources, developing a feed system design capable of providing a fuel at 400 psig to the second stage of the E-Gas (Destec) gasifier to be cogasified with coal at up to 30% on a Btu basis, performing bench- and pilot-scale testing to verify concepts and clarify decision-based options, reviewing prior art with respect to high-pressure feed system designs, and determining the economics of cofeeding alternative feedstocks with the conceptual feed system design. Activities and results thus far include the following. Several potential alternative fuels have been obtained for evaluation and testing as potential feedstocks, including sewage sludge, used railroad ties, urban wood waste, municipal solid waste, and used waste tires/tire-derived fuel. Only fuels with potential tipping fees were considered; potential energy crop fuels were not considered since they would have a net positive cost to the plant. Based on the feedstock assessment, sewage sludge has been selected as one of the primary feedstocks for consideration at the Wabash plant

  8. THERMODYNAMICAL ANALYSIS OF HIGH-PRESSURE FEED WATER HEATER IN STEAM PROPULSION SYSTEM DURING EXPLOITATION

    Directory of Open Access Journals (Sweden)

    Igor Poljak

    2017-01-01

    Full Text Available Nowadays diesel engines prevail as ship propulsion. However, steam propulsion is still primary drive for LNG carriers. In the presented paper high-pressure feed water heater was analyzed, as one of the essential components in LNG carrier steam propulsion system. Measurements of all operating parameters (fluid streams at the analyzed heat exchanger inlets and outlets were performed. Change of the operating parameters was measured at different steam system loads, not at full load as usual. Through these measurements was enabled the insight into the behaviour of the heat exchanger operating parameters during the whole exploitation. The numerical analysis was performed, based on the measured data. The changes in energy and exergy efficiency of the heat exchanger were analyzed. Energetic and exergetic power inputs and outputs were also calculated, which enabled an insight into the change of energetic and exergetic power losses of the heat exchanger at different steam system loads. Change in energetic and exergetic power losses and operating parameters, which have the strongest influence on the high-pressure feed water heater losses, were described. Analyzed heat exchanger was compared with similar heat exchangers in the base loaded conventional steam power plants. From the conducted analysis, it is concluded that the adjustment and control modes of these high-pressure heat exchangers are equal, regardless of whether they were mounted in the base loaded conventional steam power plants or marine steam systems, while their operating parameters and behaviour patterns differ greatly.

  9. Biomass use, production, feed efficiencies, and greenhouse gas emissions from global livestock systems.

    Science.gov (United States)

    Herrero, Mario; Havlík, Petr; Valin, Hugo; Notenbaert, An; Rufino, Mariana C; Thornton, Philip K; Blümmel, Michael; Weiss, Franz; Grace, Delia; Obersteiner, Michael

    2013-12-24

    We present a unique, biologically consistent, spatially disaggregated global livestock dataset containing information on biomass use, production, feed efficiency, excretion, and greenhouse gas emissions for 28 regions, 8 livestock production systems, 4 animal species (cattle, small ruminants, pigs, and poultry), and 3 livestock products (milk, meat, and eggs). The dataset contains over 50 new global maps containing high-resolution information for understanding the multiple roles (biophysical, economic, social) that livestock can play in different parts of the world. The dataset highlights: (i) feed efficiency as a key driver of productivity, resource use, and greenhouse gas emission intensities, with vast differences between production systems and animal products; (ii) the importance of grasslands as a global resource, supplying almost 50% of biomass for animals while continuing to be at the epicentre of land conversion processes; and (iii) the importance of mixed crop–livestock systems, producing the greater part of animal production (over 60%) in both the developed and the developing world. These data provide critical information for developing targeted, sustainable solutions for the livestock sector and its widely ranging contribution to the global food system.

  10. An Overview of Corrosion Issues for the Design and Operation of High-Temperature Lead- and Lead-Bismuth-Cooled Reactor Systems

    International Nuclear Information System (INIS)

    Ballinger, Ronald G.; Lim, Jeongyoun

    2004-01-01

    The viability of advanced Pb- or Pb-Bi-cooled fast reactor systems will depend on the development of classes of materials that can operate over the temperature range 650-1200 deg. C. We briefly review the current state of the technology concerning the interaction of Pb and Pb-Bi alloys with structural materials. We then identify the key challenges to successful use of materials in these systems and suggest a path forward to the development of new materials and operating methods to allow higher-temperature operation. Our focus is on the necessary trade-offs that must be considered and how these trade-offs influence R and D choices. Our analysis suggests that three classes of materials will be needed for successful deployment of a lead-alloy-cooled reactor system. A lower-temperature qualified material will be necessary for the pressure boundary. The structural and cladding materials will require 1000 deg. C- and 1200 deg. C-class materials. The 1000 deg. C-class material will be exposed to the 1000 deg. C coolant. The 1200 deg. C-class material will be required for the cladding and structural materials in the core region. The higher-temperature material will be required to accommodate anticipated temperature transients from potential accident scenarios, such as a loss of flow

  11. An Assessment of Subsurface Intake Systems: Planning and Impact on Feed Water Quality for SWRO Facilities

    KAUST Repository

    Dehwah, Abdullah

    2017-12-01

    Subsurface intake systems are known to improve the feed water quality for SWRO plants. However, a little is known about the feasibility of implementation in coastal settings, the degree of water quality improvements provided by these systems, and the internal mechanisms of potential fouling compounds removal within subsurface intake systems. A new method was developed to assess the feasibility of using different subsurface intake systems in coastal areas and was applied to Red Sea coastline of Saudi Arabia. The methodology demonstrated that five specific coastal environments could support well intake systems use for small-capacity SWRO plants, whereas large-capacity SWRO facilities could use seabed gallery intake systems. It was also found that seabed intake system could run with no operational constraints based on the high evaporation rates and associated diurnal salinity changes along the coast line. Performance of well intake systems in several SWRO facilities along the Red Sea coast showed that the concentrations of organic compounds were reduced in the feed water, similar or better than traditional pretreatment methodologies. Nearly all algae, up to 99% of bacteria, between 84 and 100% of the biopolymer fraction of NOM, and a high percentage of TEP were removed during transport through the aquifer. These organics cause membrane biofouling and using well intakes showed a 50-75% lower need to clean the SWRO membranes compared to conventional open-ocean intakes. An assessment of the effectiveness of seabed gallery intake systems was conducted through a long-term bench-scale column experiment. The simulation of the active layer (upper 1 m) showed that it is highly effective at producing feed water quality improvements and acts totally different compared to slow sand filtration systems treating freshwater. No development of a “schmutzdecke” layer occurred and treatment was not limited to the top 10 cm, but throughout the full column thickness. Algae and

  12. Performance Guaranteed Inertia Emulation forDiesel-Wind System Feed Microgrid via ModelReference Control

    Energy Technology Data Exchange (ETDEWEB)

    Melin, Alexander M. [ORNL; Zhang, Yichen [University of Tennessee, Knoxville (UTK), Department of Electrical Engineering and Computer Science; Djouadi, Seddik [University of Tennessee, Knoxville (UTK), Department of Electrical Engineering and Computer Science; Olama, Mohammed M. [ORNL

    2017-04-01

    In this paper, a model reference control based inertia emulation strategy is proposed. Desired inertia can be precisely emulated through this control strategy so that guaranteed performance is ensured. A typical frequency response model with parametrical inertia is set to be the reference model. A measurement at a specific location delivers the information of disturbance acting on the diesel-wind system to the referencemodel. The objective is for the speed of the diesel-wind system to track the reference model. Since active power variation is dominantly governed by mechanical dynamics and modes, only mechanical dynamics and states, i.e., a swing-engine-governor system plus a reduced-order wind turbine generator, are involved in the feedback control design. The controller is implemented in a three-phase diesel-wind system feed microgrid. The results show exact synthetic inertia is emulated, leading to guaranteed performance and safety bounds.

  13. Development of a dry-feed system for a coal-fired gas turbine

    Energy Technology Data Exchange (ETDEWEB)

    Rothrock, J.W. Jr.; Smith, C.F.

    1993-11-01

    The objective of the reported of the reported work is to develop a dry coal feed system that provides smooth, controllable flow of coal solids into the high pressure combustor of the engine and all test rigs. The system must start quickly and easily, run continuously with automatic transfer of coal from low pressure hoppers to the high pressure delivery system, and offer at least a 3:1 smooth turn-down ratio. cost of the equipment must be minimized to maintain the economic attractiveness of the whole system. Before the current contract started some work was done with dry powder coal. For safety and convenience reasons, coal water slurry was selected as the fuel for all work on the program. Much of the experimental work, including running the Allison 501-KM engine was done with coal slurry. Recent economic analysis led to a change to powdered coal.

  14. Exposure to Inhalable Dust, Endotoxin, and Total Volatile Organic Carbons on Dairy Farms Using Manual and Automated Feeding Systems

    DEFF Research Database (Denmark)

    Basinas, Ioannis; Cronin, Garvin; Hogan, Victoria

    2017-01-01

    was collected during the surveys. Associations between exposure concentrations and feeding systems, worker tasks, and other farm characteristics were explored in linear mixed-effect regression models with farmer identity treated as a random effect. Results: Exposure concentrations were variable and had......Introduction: Agricultural workers tend to have high exposures to organic dusts which may induce or exacerbate respiratory disorders. Studies investigating the effect of work tasks and farm characteristics on organic dust exposures among farm workers suggest that handling of animal feed...... in farms using semi-automatic feeding systems when compared to those using manual feeding systems but in multivariate regression analysis associations were not statistically significant (β = -0.54, P = 0.4). Performance of activities related to handling and spreading of hay or straw was the strongest...

  15. Dynamics of digestive proteolytic system during blood feeding of the hard tick Ixodes ricinus

    Czech Academy of Sciences Publication Activity Database

    Franta, Zdeněk; Frantová, Helena; Konvičková, J.; Horn, Martin; Sojka, Daniel; Mareš, Michael; Kopáček, Petr

    2010-01-01

    Roč. 3, č. 119 (2010), s. 1-11 ISSN 1756-3305 R&D Projects: GA AV ČR IAA600960910; GA AV ČR KJB600960911; GA ČR GD206/09/H026; GA MŠk(CZ) LC06009 Institutional research plan: CEZ:AV0Z60220518; CEZ:AV0Z40550506 Keywords : tick feeding * digestive system * expression dynymics Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 2.130, year: 2010

  16. The role of glutamatergic and GABAergic systems on serotonin- induced feeding behavior in chicken.

    Science.gov (United States)

    Mortezaei, Sepideh Seyedali; Zendehdel, Morteza; Babapour, Vahab; Hasani, Keyvan

    2013-12-01

    It has been reported that serotonin can modulate glutamate and GABA release in central nervous system (CNS). The present study was designed to examine the role of glutamatergic and GABAergic systems on serotonin- induced feeding behavior in chickens. In Experiment 1 intracerebroventricular (ICV) injection of MK- 801(NMDA receptor antagonist, 15 nmol) performed followed by serotonin (10 μg). In experiments 2, 3, 4, 5, 6 and 7 prior to serotonin injection, chickens received CNQX (AMPA/kainate receptor antagonist, 390 nmol), AIDA (mGluR1 antagonist, 2 nmol), LY341495 (mGluR2 antagonist, 150 nmol), UBP1112 (mGluR3 antagonist, 2 nmol), picrotoxin (GABA A receptor antagonist, 0.5 μg), CGP54626 (GABAB receptor antagonist, 20 ng) respectively. Cumulative food intake was determined at 3 h post injection. The results of this study showed that the hypophagic effect of serotonin was significantly attenuated by pretreatment with MK- 801 and CNQX (p 0.05). Also, the inhibitory effect of serotonin on food intake was amplified by picrotoxin (p 0.05). These results suggest that serotonin as a modulator probably interacts with glutamatergic (via NMDA and AMPA/Kainate receptors) and GABAergic (via GABAA receptor) systems on feeding behavior in chicken.

  17. Optical Properties of Chemical Bath Deposited Bismuth Fluoride (Bif ...

    African Journals Online (AJOL)

    Thin films of bismuth fluoride (Bif3) were deposited using chemical bath deposition technique from chemical baths containing solutions of bismuth nitrate (EDTA) and potassium bromide with EDTA as complexing agent in slightly acidic medium. The films were characterized using Fourier transform infrared (FTIR) ...

  18. Bismuth-silver mineralization in the Sergozerskoe gold occurrence

    Directory of Open Access Journals (Sweden)

    Kalinin A. A.

    2017-03-01

    Full Text Available Bismuth-silver mineralization attendant to gold mineralization in the Sergozerskoe gold occurrence has been studied in detail. Bi-Ag mineralization is connected with diorite porphyry dykes, which cut volcanic-sedimentary Lopian complexes of the Strel'ninsky greenstone belt – hornblendite and actinolite-chlorite amphibolites, biotite and bi-micaceous gneisses. Distribution of Bi-Ag mineralization similar to gold mineralization is controlled by 80 m thick zone of silicification. Bi minerals are found in brecciated diorite porphyry. Bismuth-silver mineralization includes native metals (bismuth, electrum, silver, tellurides (hedleyite, hessite, selenides (ikunolite, sulfides and sulfosalts of Bi and Ag (matildite, lillianite, eckerite, jalpaite, prustite, acanthite, a few undiagnosed minerals. All Bi and Ag minerals associate with galena. Composition of mineralization evolved from early to late stages of development, depending on intensity of rock alteration. The earliest Bi-Ag minerals were native bismuth and hedleyite formed dissemination in galena, and electrum with 30-45 mass.% Au. Later native bismuth was partly substituted by silver and bismuth sulfosalts and bismuth sulfides. The latest minerals were low-temperature silver sulfides eckerite, jalpaite, and acanthite, which were noted only in the most intensively altered rocks. As soon as the process of formation of Bi-Ag mineralization is the same as formation of gold, findings of bismuth-silver mineralization can serve as a positive exploration sign for gold in the region.

  19. Effectiveness of ranitidine bismuth citrate and proton pump inhibitor ...

    African Journals Online (AJOL)

    Effectiveness of ranitidine bismuth citrate and proton pump inhibitor based triple therapies of Helicobacter pylori in Turkey. ... Results: When we look at the eradication rates of the treatment groups, only two groups (ranitidine bismuth citrate and rabeprazole groups) had eradication rates greater than 80%, both at intention to ...

  20. Environmental factors affecting feed intake of steers in different housing systems in the summer

    Science.gov (United States)

    Koknaroglu, H.; Otles, Z.; Mader, T.; Hoffman, M. P.

    2008-07-01

    A total of 188 yearling steers of predominantly Angus and Hereford breeds, with mean body weight of 299 kg, were used in this study, which started on 8 April and finished on 3 October, to assess the effects of environmental factors on feed intake of steers in various housing systems. Housing consisted of outside lots with access to overhead shelter, outside lots with no overhead shelter and a cold confinement building. Ad libitum corn, 2.27 kg of 35% dry matter whole plant sorghum silage and 0.68 kg of a 61% protein-vitamin-mineral supplement was offered. Feed that was not consumed was measured to determine feed intake. The temperature data were recorded by hygro-thermographs. Hourly temperatures and humidity were used to develop weather variables. Regression analysis was used and weather variables were regressed on dry matter intake (DMI). When addition of a new variable did not improve R 2 more than one unit, then the number of variables in the model was truncated. Cattle in confinement had lower DMI than those in open lots and those in open lots with access to an overhead shelter ( P Effect of heat was predominantly displayed in August in the three housing systems. In terms of explaining variation in DMI, in outside lots with access to overhead shelter, average and daytime temperatures were important factors, whereas in open lots, nocturnal, peak and average temperatures were important factors. In confinement buildings, the previous day’s temperature and humidity index were the most important factors explaining variation in DMI. Results show the effect of housing and weather variables on DMI in summer and when considering these results, cattle producers wishing to improve cattle feedlot performance should consider housing conditions providing less stress or more comfort.

  1. Impact of wind turbine based on double feed induction generator and FACTS devices on power systems

    Directory of Open Access Journals (Sweden)

    Labiba ADJOUDJ

    2015-05-01

    Full Text Available Integration of wind turbines may have significant impacts on power system operation and generation of electricity from wind power has received considerable attention. This paper analyses the impact of integrating wind generation based on double feed induction generators (DFIG and Flexible AC Transmission System (FACTS on the voltage collapse and active losses of network IEEE 30 bus test. Therefore, we must choose among FACTS devices, those with specific applications such as maintaining the voltage at the desired value and the control of power flow, SVC is the most effective in the compensation of reactive as well as maintaining the voltage, and TCSC is the best choice for a proper control of power flow and consequently the reduction of active losses. The simulation results show clearly the effect of wind power plants and FACTS on the grid, voltage stability and power quality of electric power system.

  2. Heat capacity, enthalpy and entropy of bismuth niobate and bismuth tantalate

    Czech Academy of Sciences Publication Activity Database

    Hampl, M.; Strejc, A.; Sedmidubský, D.; Růžička, K.; Hejtmánek, Jiří; Leitner, J.

    2006-01-01

    Roč. 179, - (2006), s. 77-80 ISSN 0022-4596 Institutional research plan: CEZ:AV0Z10100521 Keywords : heat capacity * heat of formation * heat content * bismuth perovskite Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.107, year: 2006

  3. TESTS WITH HIGH-BISMUTH HLW GLASSES FINAL REPORT VSL-10R1780-1, Rev. 0; 12/13/10

    International Nuclear Information System (INIS)

    Matlack, K.S.; Kruger, A.A.; Joseph, I.; Gan, H.; Kot, W.K.; Chaudhuri, M.; Mohr, R.K.; Mckeown, D.A.; Bardakei, T.; Gong, W.; Buecchele, A.C.; Pegg, I.L.

    2011-01-01

    This Final Report describes the testing of glass formulations developed for Hanford High Level Waste (HLW) containing high concentrations of bismuth. In previous work on high-bismuth HLW streams specified by the Office of River Protection (ORP), fully compliant, high waste loading compositions were developed and subjected to melter testing on the DM100 vitrification system. However, during heat treatment according to the Hanford Tank Waste Treatment and Immobilization Plant (WTP) HLW canister centerline cooling (CCC) curves, crucible melts of the high-bismuth glasses were observed to foam. Clearly, such an occurrence during cooling of actual HLW canisters would be highly undesirable. Accordingly, the present work involves larger-scale testing to determine whether this effect occurs under more prototypical conditions, as well as crucible-scale tests to determine the causes and potentially remediate the observed foaming behavior. The work included preparation and characterization of crucible melts designed to determine the underlying causes of the foaming behavior as well as to assess potential mitigation strategies. Testing was also conducted on the DM1200 HLW Pilot melter with a composition previously tested on the DM100 and shown to foam during crucible-scale CCC heat treatment. The DM1200 tests evaluated foaming of glasses over a range of bismuth concentrations poured into temperature-controlled, 55-gallon drums which have a diameter that is close to that of the full-scale WTP HLW canisters. In addition, the DM1200 tests provided the first large-scale melter test data on high-bismuth WTP HLW compositions, including information on processing rates, cold cap behavior and off-gas characteristics, and data from this waste composition on the prototypical DM1200 off-gas treatment system. This work builds on previous work performed at the Vitreous State Laboratory (VSL) for ORP on the same waste composition. The scope of this study was outlined in a Test Plan that was

  4. TESTS WITH HIGH-BISMUTH HLW GLASSES FINAL REPORT VSL-10R1780-1 REV 0 12/13/10

    Energy Technology Data Exchange (ETDEWEB)

    MATLACK KS; KRUGER AA; JOSEPH I; GAN H; KOT WK; CHAUDHURI M; MOHR RK; MCKEOWN DA; BARDAKEI T; GONG W; BUECCHELE AC; PEGG IL

    2011-01-05

    This Final Report describes the testing of glass formulations developed for Hanford High Level Waste (HLW) containing high concentrations of bismuth. In previous work on high-bismuth HLW streams specified by the Office of River Protection (ORP), fully compliant, high waste loading compositions were developed and subjected to melter testing on the DM100 vitrification system. However, during heat treatment according to the Hanford Tank Waste Treatment and Immobilization Plant (WTP) HLW canister centerline cooling (CCC) curves, crucible melts of the high-bismuth glasses were observed to foam. Clearly, such an occurrence during cooling of actual HLW canisters would be highly undesirable. Accordingly, the present work involves larger-scale testing to determine whether this effect occurs under more prototypical conditions, as well as crucible-scale tests to determine the causes and potentially remediate the observed foaming behavior. The work included preparation and characterization of crucible melts designed to determine the underlying causes of the foaming behavior as well as to assess potential mitigation strategies. Testing was also conducted on the DM1200 HLW Pilot melter with a composition previously tested on the DM100 and shown to foam during crucible-scale CCC heat treatment. The DM1200 tests evaluated foaming of glasses over a range of bismuth concentrations poured into temperature-controlled, 55-gallon drums which have a diameter that is close to that of the full-scale WTP HLW canisters. In addition, the DM1200 tests provided the first large-scale melter test data on high-bismuth WTP HLW compositions, including information on processing rates, cold cap behavior and off-gas characteristics, and data from this waste composition on the prototypical DM1200 off-gas treatment system. This work builds on previous work performed at the Vitreous State Laboratory (VSL) for ORP on the same waste composition. The scope of this study was outlined in a Test Plan that was

  5. Fundamental study on reaction of lead-bismuth eutectic and sodium. Identification of reaction products and examination of reaction behavior

    International Nuclear Information System (INIS)

    Saito, Jun-ichi; Hirakawa, Yasushi

    2003-09-01

    A simplified secondary sodium cooling system utilizing lead-bismuth eutectic as an intermediate coolant has been selected as one of candidate systems for the 'Feasibility Studies on Commercialized Fast Reactor System'. In this study, fundamental reaction experiments have been performed to understand a reaction behavior between sodium and lead-bismuth. In order to identify the reaction products and to elucidate a reaction process, sampling and X-ray diffraction analysis of the reaction products are carried out. Following results are obtained. (1) The principal reaction products which formed in sodium and lead-bismuth ternary system are BiNa 3 and Pb 4 Na 15 intermetallic compounds. These two reaction products are identified irrespective of either primary sample content or sampling temperature. (2) Pb 3 Na intermetallic compound is identified in the reaction products for the first time. (3) The principal reaction product which formed in sodium and bismuth binary system is BiNa 3 intermetallic compound. (4) The reaction products which formed in sodium and lead binary system consist of various intermetallic compounds of sodium and lead system. Single phase of an intermetallic compound can not be obtained in this system. Based on these X-ray diffraction analyses, reaction process models of formation and dissolution are proposed. (author)

  6. A reassessment of the role of serotonergic system in the control of feeding behavior

    Directory of Open Access Journals (Sweden)

    Medeiros Magda A.

    2005-01-01

    Full Text Available The role of serotonergic system in the feeding behaviorwas appraised by electrolytic lesions in the dorsal raphe nucleus (DRN and administration of para-chlorophenylalanine (PCPA, 3 mg/5 mul, icv. Chronic evaluations were accomplished through 120 and 360 days in PCPA-injected and DRN-lesioned rats, respectively. Acute food intake was evaluated in fasted rats and submitted to injection of PCPA and hydroxytryptophan (LHTP, 30 mg/kg, ip. DRN-lesioned rats exhibited 22-80% increase in food intake up to sixth month, whereas the obesity was evident and sustained by whole period. In PCPA-injected rats was observed an initial increase in the food intake followed by hypophagy from 25th to 30th day and a transitory increase of body weight from 5th to 60th day. In the acute study, the LHTP reverted partially the PCPA-induced increase in food intake of fasted rats suggesting a sustained capacity of decarboxylation of precursor by serotonergic neurons. Slow restoration of the levels of food intake in DRN-lesioned rats reveals a neuroplasticity in the systems that regulate feeding behavior. A plateau on the body weight curve in lesioned rats possibly represents the establishment of a new and higher set point of energetic balance.

  7. Bismuth-Based Quadruple Therapy with Bismuth Subcitrate, Metronidazole, Tetracycline and Omeprazole in the Eradication of Helicobacter pylori

    Directory of Open Access Journals (Sweden)

    Raymond Lahaie

    2001-01-01

    Full Text Available BACKGROUND: A previous study showed that 14 days of qid bismuth-based triple therapy with tetracycline 500 mg, metronidazole 250 mg and colloidal bismuth subcitrate 120 mg resulted in excellent Helicobacter pylori eradication rates (89.5%. The present study looked at a shorter treatment period by adding omeprazole and by reducing the dose of tetracycline.

  8. Comparison of feeding systems: feed cost, palatability and environmental impact among hay-fattened beef, consistent grass-only-fed beef and conventional marbled beef in Wagyu (Japanese Black cattle).

    Science.gov (United States)

    Sithyphone, Khounsaknalath; Yabe, Mitsuyasu; Horita, Hiroshi; Hayashi, Keisuke; Fumita, Tomiko; Shiotsuka, Yuji; Etoh, Tetsuji; Ebara, Fumio; Samadmanivong, Olavanh; Wegner, Jochen; Gotoh, Takafumi

    2011-04-01

    The objective of this article is to compare feed cost, palatability and environmental impacts among feeding systems of high concentrate (HC), high hay (HH) and grass-only-fed (Gof) groups. Feed cost was the sum of costs paid for feed intake times the price of feed per kilogram. Palatability was measured by a panel taste test using HH and Gof beef and analyzed for differences. Environmental impacts were calculated based on 1 kg of Japanese beef yield of CO(2) equivalents (eq) and animal end weights at each feeding stage. Results showed that the HH and Gof feeding systems could significantly reduce feed costs by approximately 60% and 78%, respectively, from the HC. In the panel taste test, 50% and 47.50% of panelists indicated that HH beef was 'extremely delicious' and 'acceptable,' respectively, while 15% indicated that Gof beef was 'extremely delicious'; 62.50% indicated that Gof beef was 'acceptable.' Environmental impacts of each feeding system in terms of CO(2) equivalents (eq) were 9.32, 6.10 and 2.04 tonnes of eq for the HC, HH and Gof, respectively. The HH was an economical system that produced moderate impacts on the environment and had impressive taste. © 2011 The Authors. Journal compilation © 2011 Japanese Society of Animal Science.

  9. Adsorption of volatile polonium and bismuth species on metals in various gas atmospheres. Pt. I. Adsorption of volatile polonium and bismuth on gold

    Energy Technology Data Exchange (ETDEWEB)

    Maugeri, Emilio Andrea; Neuhausen, Joerg; Dressler, Rugard; Piguet, David; Voegele, Alexander; Schumann, Dorothea [Paul Scherrer Institut (PSI), Villigen (Switzerland). Lab. for Radiochemistry; Eichler, Robert [Paul Scherrer Institut (PSI), Villigen (Switzerland). Lab. for Radiochemistry; Bern Univ. (Switzerland). Dept. for Chemistry and Biochemistry; Rijpstra, Kim [Ghent Univ., Zwijnaarde (Belgium). Center for Molecular Modeling (CMM); Cottenier, Stefaan [Ghent Univ., Zwijnaarde (Belgium). Center for Molecular Modeling (CMM); Ghent Univ., Zwijnaarde (Belgium). Dept. of Materials Science and Engineering

    2016-07-01

    Polonium isotopes are considered the most hazardous radionuclides produced during the operation of accelerator driven systems (ADS) when lead-bismuth eutectic (LBE) is used as the reactor coolant and as the spallation target material. In this work the use of gold surfaces for capturing polonium from the cover gas of the ADS reactor was studied by thermochromatography. The results show that gaseous monoatomic polonium, formed in dry hydrogen, is adsorbed on gold at 1058 K. Its adsorption enthalpy was calculated as -250±7 kJ mol{sup -1}, using a Monte Carlo simulation code. Highly volatile polonium species that were observed in similar experiments in fused silica columns in the presence of moisture in both inert and reducing gas were not detected in the experiments studying adsorption on gold surfaces. PoO{sub 2} is formed in both dry and moist oxygen, and its interaction with gold is characterized by transport reactions. The interaction of bismuth, present in large amounts in the atmosphere of the ADS, with gold was also evaluated. It was found that bismuth has a higher affinity for gold, compared to polonium, in an inert, reducing, and oxidizing atmosphere. This fact must be considered when using gold as a material for filtering polonium in the cover gas of ADS.

  10. Theoretical Investigation of Bismuth-Based Semiconductors for Photocatalytic Applications

    KAUST Repository

    Laradhi, Shaikhah

    2017-11-01

    Converting solar energy to clean fuel has gained remarkable attention as an emerged renewable energy resource but optimum efficiency in photocatalytic applications has not yet been reached. One of the dominant factors is designing efficient photocatalytic semiconductors. The research reveals a theoretical investigation of optoelectronic properties of bismuth-based metal oxide and oxysulfide semiconductors using highly accurate first-principles quantum method based on density functional theory along with the range-separated hybrid HSE06 exchange-correlation functional. First, bismuth titanate compounds including Bi12TiO20, Bi4Ti3O12, and Bi2Ti2O7 were studied in a combined experimental and theoretical approach to prove its photocatalytic activity under UV light. They have unique bismuth layered structure, tunable electronic properties, high dielectric constant and low electron and effective masses in one crystallographic direction allowing for good charge separation and carrier diffusion properties. The accuracy of the investigation was determined by the good agreement between experimental and theoretical values. Next, BiVO4 with the highest efficiency for oxygen evolution was investigated. A discrepancy between the experimental and theoretical bandgap was reported and inspired a systematic study of all intrinsic defects of the material and the corresponding effect on the optical and transport properties. A candidate defective structure was proposed for an efficient photocatalytic performance. To overcome the carrier transport limitation, a mild hydrogen treatment was also introduced. Carrier lifetime was enhanced due to a significant reduction of trap-assisted recombination, either via passivation of deep trap states or reduction of trap state density. Finally, an accurate theoretical approach to design a new family of semiconductors with enhanced optoelectronic properties for water splitting was proposed. We simulated the solid solutions Bi1−xRExCuOS (RE = Y, La

  11. Genome-wide association and systems genetic analyses of residual feed intake, daily feed consumption, backfat and weight gain in pigs

    DEFF Research Database (Denmark)

    Do, Duy Ngoc; Ostersen, Tage; Strathe, Anders Bjerring

    2014-01-01

    Feed efficiency is one of the major components determining costs of animal production. Residual feed intake (RFI) is defined as the difference between the observed and the expected feed intake given a certain production. Residual feed intake 1 (RFI1) was calculated based on regression of individual...... daily feed intake (DFI) on initial test weight and average daily gain. Residual feed intake 2 (RFI2) was as RFI1 except it was also regressed with respect to backfat (BF). It has been shown to be a sensitive and accurate measure for feed efficiency in livestock but knowledge of the genomic regions...

  12. Environmental and economic performance of beef farming systems with different feeding strategies in southern Brazil

    NARCIS (Netherlands)

    Pashaei Kamali, Farahnaz; Linden, van der Aart; Meuwissen, Miranda P.M.; Malafaia, Guilherme Cunha; Oude Lansink, Alfons G.J.M.; Boer, de Imke J.M.

    2016-01-01

    Beef production is one of the contributors to emission of pollutants to the environment, and increasingly competes for natural resources. Beef producers can improve their environmental performance by adopting alternative feeding strategies. Adoption of alternative feeding strategies, however,

  13. NEW RESEARCHES REGARDING THE FEEDING SYSTEM DESIGNED FOR HOLSTEIN-FRISIAN CATTLE FARMS

    Directory of Open Access Journals (Sweden)

    LAVINIA MOISE

    2008-05-01

    Full Text Available In the organization and development of production activity, which has like result economical efficiency into a cattle farm, the application of viable breeding technologies it’s the best way to obtain positives results.The feeding system of Holstein-Frisian cattle, applied in the Dambovita farms it’s a model can be extended and applied in all the cattle farms, in the same climate and soil conditions, even if the farm dimensions and working organization are different.At the studied farms the cattle don’t paste; the arable land it’s used for perennial and annual fodder culture, that assure the necessary in green forage during the summer and raw material for fibroses and silo-forage preparing. At these farms it isn’t a practice to feed the cattle only with green fodder in the summer period (for milk production but with a balanced quantity of dry substances represented by fibrouses, industrial succulent and wet corn, near by green fodder.One of the reason that assure a big quantity of milk of Holstein-Frisian cattle it is represented by different feeding, depending on milk quantity and physical estate of each cow.An essential condition for a profitable activity of cattle farms is the presence of arable land to assure, at least, the production of base forage, respectively green and succulent forage, silo corn and hay; without this surfaces can’t speak about efficient breeding of cattle in a farm or agricultural exploitation.

  14. Entry, Descent and Landing Systems Analysis: Exploration Feed Forward Internal Peer Review Slide Package

    Science.gov (United States)

    Dwyer Cianciolo, Alicia M. (Editor)

    2011-01-01

    NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to successfully land large payloads at Mars for both robotic and human-scale missions. Year 1 of the study focused on technologies required for Exploration-class missions to land payloads of 10 to 50 mt. Inflatable decelerators, rigid aeroshell and supersonic retro-propulsion emerged as the top candidate technologies. In Year 2 of the study, low TRL technologies identified in Year 1, inflatables aeroshells and supersonic retropropulsion, were combined to create a demonstration precursor robotic mission. This part of the EDL-SA Year 2 effort, called Exploration Feed Forward (EFF), took much of the systems analysis simulation and component model development from Year 1 to the next level of detail.

  15. Iodine Hall Thruster Propellant Feed System for a CubeSat

    Science.gov (United States)

    Polzin, Kurt A.; Peeples, Steven

    2014-01-01

    The components required for an in-space iodine vapor-fed Hall effect thruster propellant management system are described. A laboratory apparatus was assembled and used to produce iodine vapor and control the flow through the application of heating to the propellant reservoir and through the adjustment of the opening in a proportional flow control valve. Changing of the reservoir temperature altered the flowrate on the timescale of minutes while adjustment of the proportional flow control valve changed the flowrate immediately without an overshoot or undershoot in flowrate with the requisite recovery time associated with thermal control systems. The flowrates tested spanned a range from 0-1.5 mg/s of iodine, which is sufficient to feed a 200-W Hall effect thruster.

  16. An evaluated neutronic data file for bismuth

    International Nuclear Information System (INIS)

    Guenther, P.T.; Lawson, R.D.; Meadows, J.W.; Smith, A.B.; Smith, D.L.; Sugimoto, M.; Howerton, R.J.

    1989-11-01

    A comprehensive evaluated neutronic data file for bismuth, extending from 10 -5 eV to 20.0 MeV, is described. The experimental database, the application of the theoretical models, and the evaluation rationale are outlined. Attention is given to uncertainty specification, and comparisons are made with the prior ENDF/B-V evaluation. The corresponding numerical file, in ENDF/B-VI format, has been transmitted to the National Nuclear Data Center, Brookhaven National Laboratory. 106 refs., 10 figs., 6 tabs

  17. An evaluated neutronic data file for bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, P.T.; Lawson, R.D.; Meadows, J.W.; Smith, A.B.; Smith, D.L.; Sugimoto, M. (Argonne National Lab., IL (USA)); Howerton, R.J. (Lawrence Livermore National Lab., CA (USA))

    1989-11-01

    A comprehensive evaluated neutronic data file for bismuth, extending from 10{sup {minus}5} eV to 20.0 MeV, is described. The experimental database, the application of the theoretical models, and the evaluation rationale are outlined. Attention is given to uncertainty specification, and comparisons are made with the prior ENDF/B-V evaluation. The corresponding numerical file, in ENDF/B-VI format, has been transmitted to the National Nuclear Data Center, Brookhaven National Laboratory. 106 refs., 10 figs., 6 tabs.

  18. Quantum oscillations of conductivity in bismuth wires

    International Nuclear Information System (INIS)

    Condrea, Elena

    2011-01-01

    Measurements of the resistance of bismuth nanowires with several diameters and different quality reveal oscillations on the dependence of resistance under uniaxial strain at T = 4.2 K. Amplitude of oscillations is significant (38 %) at helium temperature and becomes smearing at T = 77 K. Observed oscillations originate from quantum size effect. A simple evaluation of period of oscillations allows us to identify the groups of carriers involved in transport. Calculated periods of 42.2 and 25.9 nm satisfy approximately the ratio 2:1 for two experimentally observed sets of oscillations from light and heavy electrons.

  19. Optical Properties of Bismuth Tellurite Based Glass

    Science.gov (United States)

    Oo, Hooi Ming; Mohamed-Kamari, Halimah; Wan-Yusoff, Wan Mohd Daud

    2012-01-01

    A series of binary tellurite based glasses (Bi2O3)x (TeO2)100−x was prepared by melt quenching method. The density, molar volume and refractive index increase when bismuth ions Bi3+ increase, this is due to the increased polarization of the ions Bi3+ and the enhanced formation of non-bridging oxygen (NBO). The Fourier transform infrared spectroscopy (FTIR) results show the bonding of the glass sample and the optical band gap, Eopt decreases while the refractive index increases when the ion Bi3+ content increases. PMID:22605999

  20. Optical Properties of Bismuth Tellurite Based Glass

    Directory of Open Access Journals (Sweden)

    Hooi Ming Oo

    2012-04-01

    Full Text Available A series of binary tellurite based glasses (Bi2O3x (TeO2100−x was prepared by melt quenching method. The density, molar volume and refractive index increase when bismuth ions Bi3+ increase, this is due to the increased polarization of the ions Bi3+ and the enhanced formation of non-bridging oxygen (NBO. The Fourier transform infrared spectroscopy (FTIR results show the bonding of the glass sample and the optical band gap, Eopt decreases while the refractive index increases when the ion Bi3+ content increases.

  1. Water Hammer Mitigation on Postulated Pipe Break of Feed Water System

    International Nuclear Information System (INIS)

    Seong, Ho Je; Woo, Kab Koo; Cho, Keon Taek

    2008-01-01

    The Feed Water (FW) system supplies feedwater from the deaerator storage tank to the Steam Generators(S/G) at the required pressure, temperature, flow rate, and water chemistry. The part of FW system, from the S/G to Main Steam Valve House just outside the containment building wall, is designed as safety grade because of its safety function. According to design code the safety related system shall be designed to protect against dynamic effects that may results from a pipe break on high energy lines such as FW system. And the FW system should be designed to minimize blowdown volume of S/G secondary side during the postulated pipe break. Also the FW system should be designed to prevent the initiation or to minimize the effects of water hammer transients which may be induced by the pipe break. This paper shows the results of the hydrodynamic loads induced by the pipe break and the optimized design parameters to mitigate water hammer loads of FW system for Shin-Kori Nuclear Power Plant Unit 3 and 4 (SKN 3 and 4)

  2. Feeding behavior as an early predictor of bovine respiratory disease in North American feedlot systems.

    Science.gov (United States)

    Wolfger, B; Schwartzkopf-Genswein, K S; Barkema, H W; Pajor, E A; Levy, M; Orsel, K

    2015-01-01

    Bovine respiratory disease (BRD), which can cause substantial losses for feedlot operations, is often difficult to detect based solely on visual observations. The objectives of the current study were to determine a BRD case identification based on clinical and laboratory parameters and assess the value of feeding behavior for early detection of BRD. Auction-derived, mixed-breed beef steers (n = 213) with an average arrival weight of 294 kg were placed at a southern Alberta commercial feedlot equipped with an automated feed bunk monitoring system. Feeding behavior was recorded continuously (1-s intervals) for 5 wk after arrival and summarized into meals. Meals were defined as feeding events that were interrupted by less than 300 s nonfeeding. Meal intake (g) and meal time (min) were further summarized into daily mean, minimum, maximum, and sum and, together with frequency of meals per day, were fit into a discrete survival time analysis with a conditional log-log link. Feedlot staff visually evaluated (pen-checked) health status twice daily. Within 35 d after arrival, 76% (n = 165) of the steers had 1 or more clinical signs of BRD (reluctance to move, crusted nose, nasal or ocular discharge, drooped ears or head, and gaunt appearance). Whereas 41 blood samples could not be processed due to immediate freezing, for 124 of these steers, complete and differential blood cell count, total serum protein, plasma fibrinogen, serum concentration of haptoglobin (HP), and serum amyloid A (SAA) were determined. The disease definition for BRD was a rectal temperature ≥ 40.0°C, at least 2 clinical signs of BRD, and HP > 0.15 mg/mL. It was noteworthy that 94% of the 124 steers identified by the feedlot staff with clinical signs of BRD had HP > 0.15 mg/mL. An increase in mean meal intake, frequency, and mean inter-meal interval was associated with a decreased hazard for developing BRD 7 d before visual identification (P meal interval were associated with a decreased BRD hazard up

  3. Energy management system based on standard 50001 in the company Feed Cienfuegos

    International Nuclear Information System (INIS)

    Monteagudo Yanes, José P.; Crespo Sánchez, Gustavo; Montesino Pérez, Milagros; Cruz Virosa, Ibis; Cabrera Sánchez, Jorge Luis

    2017-01-01

    The energy management in manufacturing of balanced feed requires the Company Feed Cienfuegos to have systems and processes that enable efficiency and quality in production, improve energy performance and increase their competitiveness. Technology of Total Efficient Energy Management (TTEEM) and Cuban Standard ISO 50001 that are promoted and researched by the Center for Studies of Energy and Environment (CEEMA), of the University of Cienfuegos and the necessity and possibility of this Company to improve energy management allowed undertaking this project. Getting and use of energy performance indicator against production and the energy base line for daily control of energy consumption allowed decreasing from 12.8 kWh/t on average, to values below 10 kWh/t for the same production levels (500t/day). This result represents the reduction of energy consumption in the order of 364,000 kWh/year and consequently 15% of the energy item costs. This result is equivalent in cost of generation to 120 tons of oil/year, which at current oil prices mean a savings of $ 6,000 USD/year. (author)

  4. Tank waste remediation system phase I high-level waste feed processability assessment report

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, S.L.; Stegen, G.E., Westinghouse Hanford

    1996-08-01

    This report evaluates the effects of feed composition on the Phase I high-level waste immobilization process and interim storage facility requirements for the high-level waste glass.Several different Phase I staging (retrieval, blending, and pretreatment) scenarios were used to generate example feed compositions for glass formulations, testing, and glass sensitivity analysis. Glass models and data form laboratory glass studies were used to estimate achievable waste loading and corresponding glass volumes for various Phase I feeds. Key issues related to feed process ability, feed composition, uncertainty, and immobilization process technology are identified for future consideration in other tank waste disposal program activities.

  5. The network modifier and former role of the bismuth ions in the bismuth-lead-germanate glasses.

    Science.gov (United States)

    Rada, M; Rus, L; Rada, S; Culea, E; Rusu, T

    2014-11-11

    The present work is focused on the enhancement of network former environment in lead-germanate glasses by bismuth ions doping. A series of bismuth-lead-germanate glasses with the xBi2O3·(100-x)[7GeO2·3PbO] composition glass where 0≤x≤30 mol% Bi2O3 were synthesized by melt-quenching method. The FTIR, UV-VIS spectroscopy and cyclic voltammetry were conducted on these samples to evaluate the doping effect of structure of the host matrix network. Our results indicate that direct incorporation of Bi2O3 into the lead-germanate network modifies the lead-germanate network and the internal structure of glass network is rearranged. The structural flexibility of the lead-germanate network is possible due to its incapacity to accommodate with the excess of oxygen atoms and the creation of bridging oxygen ions. Optical gap energy and refractive index were obtained as a function of Bi2O3 content. Gap energy values decrease as Bi2O3 content increased from 0 to 10 mol%. Further increase of Bi2O3 concentration beyond 10 mol% increased the gap energy values. These behaviors of the glass system can be explained by two mechanisms: (i) for x≤10 mol% Bi2O3--increase of degree of disorder of the host matrix because Bi2O3 is network modifier and (ii) for x>10 mol%--Bi2O3 acts as a network former. Cyclic voltammetry measurements using the glass system with 10Bi2O3·90[7GeO2·3PbO] composition as working electrode show the mobility of the lead ions, in agreement with UV-VIS data. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Thermalhydraulic assessment of the Pickering NGS 'B' feed and bleed system for the hot boiler chemical clean (Siemens Process)

    International Nuclear Information System (INIS)

    Lorencez, Carlos M.

    2000-01-01

    The Hot Boiler Chemical Clean (HBCC) process from Siemens, to be used in PNGS, requires that the Heat Transport System (HTS) temperature be maintained in the range 160 to 170 o C for several days. To achieve these thermalhydraulic condition, the core decay power and the pump power of the main circulating pumps in a 3-3 configuration are employed to warm up the HTS from approximately 38 o C to 170 o C. At this point, high Bleed bias is applied to the signal of the HTS pressure controller to provide high Feed and Bleed flows, which are used to control the HTS temperature by means of the Bleed Cooler. To address any concern posed by these infrequently used HTS thermalhydraulic conditions, a detailed thermalhydraulic model of the Feed and Bleed System, that also includes the Gland Supply, Gland Return and Purification systems, was developed for the TUF code to determine the suitability of the Feed and Bleed System to conduct the HBCC. The model was then used to estimate the parameters such as Feed and Bleed flows, valve openings, pressure and temperature distributions throughout the Feed and Bleed System required for the application of HBCC. (author)

  7. Recent Developments of Photovoltaics Integrated with Battery Storage Systems and Related Feed-In Tariff Policies: A Review

    Directory of Open Access Journals (Sweden)

    Angel A. Bayod-Rújula

    2017-01-01

    Full Text Available The paper presents a review of the recent developments of photovoltaics integrated with battery storage systems (PV-BESs and related to feed-in tariff policies. The integrated photovoltaic battery systems are separately discussed in the regulatory context of Germany, Italy, Spain, United Kingdom, Australia, and Greece; the attention of this paper is focused on those integrated systems subject to incentivisation policies such as feed-in tariff. Most of the contributions reported in this paper consider already existing incentive schemes; the remaining part of the contributions proposes interesting and novel feed-in tariff schemes. All the contributions provide an important resource for carrying out further research on a new era of incentive policies in order to promote storage technologies and integrated photovoltaic battery systems in smart grids and smart cities. Recent incentive policies adopted in Germany, Italy, Spain, and Australia are also discussed.

  8. Ultrasonic and Thermal Properties of Borate and Phosphate Glasses Containing Bismuth and Lead

    International Nuclear Information System (INIS)

    Aziz, Sidek Hj. Abd.; Ahmad, Hamezan; Wahab, Zaidan A.; Sulaiman, Zainal Abidin; Talib, Zainal Abidin; Shaari, A. Halim; Senin, H. B.

    2007-01-01

    Systematic series of (B2O3,P2O5)-Bi2O3-PbO glasses have been successfully prepared by using the rapid quenching technique in which each oxide content changes for every series on the basis of its weight percentage. Their amorphous natures were confirmed earlier by the x-ray diffraction technique. The experimental results show that the density of both glasses, determined by using the Archimedes principle, increases with the glass modifier content. This is due to the replacement of Bi2O3 and PbO in the borate and phosphate glassy networks. The molar volume for borate glass increases with the addition of bismuth and lead oxides, but a reverse trend occurs for the phosphate glass. The longitudinal and shear ultrasound velocities, determined by the MBS 8000 system, of both lead bismuth borate and phosphate glasses show a decreasing trend as more PbO and Bi2O3 are added to the glass system. The increase in PbO/Bi2O3 content was probably related to the progressive increase in the concentration of non-bridging oxygen (NBOs). Thermal studies of the glass, using the Labsys DTA-Setaram machine, show that the value of the glass transition temperature (Tg) is closely related to the chemical bond in the system. In lead bismuth borate glasses, the addition of more Pb2+ and Bi3+ results in a more dominant ionic bond character in the system and hence decreases Tg of the sample. However, in lead bismuth phosphate glasses, the addition of Pb2+ and Bi3+ not only failed to weaken the covalent character in P-O-P bonds, but strengthened it further, leading to an increment in the values of Tg

  9. Report - Melter Testing of New High Bismuth HLW Formulations VSL-13R2770-1

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, Albert A.; Pegg, I. L.; Kot, W. K.; Gan, H.; Matlack, K. S.

    2013-11-13

    The primary objective of the work described was to test two glasses formulated for a high bismuth waste stream on the DM100 melter system. Testing was designed to determine processing characteristics and production rates, assess the tendency for foaming, and confirm glass properties. The glass compositions tested were previously developed to maintain high waste loadings and processing rates while suppressing the foaming observed in previous tests

  10. Magnetic properties of the binary Nickel/Bismuth alloy

    Energy Technology Data Exchange (ETDEWEB)

    Keskin, Mustafa; Şarlı, Numan, E-mail: numansarli82@gmail.com

    2017-09-01

    Highlights: • We model and investigate the magnetic properties of the Ni/Bi alloy within the EFT. • Magnetizations of the Ni/Bi alloy are observed as Bi1 > Bi2 > Ni/Bi > Ni at T < Tc. • Magnetization of the Bi1 is dominant and Ni is at least dominant T < Tc. • Total magnetization of the Ni/Bi alloy is close to those of Ni at T < Tc. • Hysteresis curves are overlap at T < 0.1 and they behave separately at T > 0.1. - Abstract: Magnetic properties of the binary Nickel/Bismuth alloy (Ni/Bi) are investigated within the effective field theory. The Ni/Bi alloy has been modeled that the rhombohedral Bi lattice is surrounded by the hexagonal Ni lattice. According to lattice locations, Bi atoms have two different magnetic properties. Bi1 atoms are in the center of the hexagonal Ni atoms (Ni/Bi1 single layer) and Bi2 atoms are between two Ni/Bi1 bilayers. The Ni, Bi1, Bi2 and Ni/Bi undergo a second-order phase transition from the ferromagnetic phase to paramagnetic phase at Tc = 1.14. The magnetizations of the Ni/Bi alloy are observed as Bi1 > Bi2 > Ni/Bi > Ni at T < Tc; hence the magnetization of the Bi1 is dominant and Ni is at least dominant. However, the total magnetization of the Ni/Bi alloy is close to magnetization of the Ni at T < Tc. The corcivities of the Ni, Bi1, Bi2 and Ni/Bi alloy are the same with each others, but the remanence magnetizations are different. Our theoretical results of M(T) and M(H) of the Ni/Bi alloy are in quantitatively good agreement with the some experimental results of binary Nickel/Bismuth systems.

  11. Predictive ability of the feeding system in Iberian pig by means of several analytical methods

    Directory of Open Access Journals (Sweden)

    González, E.

    2013-04-01

    Full Text Available The reliability of several analytical methods proposed to predict the feeding system received by Iberian pigs during the fattening period has been contrasted. Samples of subcutaneous adipose tissue were analyzed from 38 batches of pigs fattened in three seasons of montanera (acorn and pastures feeding. They corresponded to the four categories described in the Quality Standard for Iberian pig products: 251 samples of bellota, 164 of recebo, 197 of cebo de campo and 137 of cebo. To perform the study, the following analytical methods were used: fatty acid quantification, NIR, alpha and gamma tocopherol, chemical sensor, triacilglycerides, stable isotopes and neophytadiene. The laboratories received the samples without any information about the fattening system to which they belonged and remitted their predictions with respect to the above categories. The results showed a high percentage of accurate predictions of the methods when the fattening type corresponds to the extreme categories (bellota and cebo, however, the methods had difficulty in discerning between samples from a mixed feeding regime with acorn and feed (recebo and problems when pigs are fattened with compound feeds including vegetable fats with high levels of oleic acid. Although a simplification into only two categories (cebo/campo and recebo/bellota results in a success rate higher than 90% for some methods, the combination of two or three techniques with problematic samples allows for differentiating among the four categories with the same accuracy.Se ha contrastado la fiabilidad de varios métodos analíticos para determinar el tipo de alimentación recibida durante el cebo por cerdos Ibéricos a partir de muestras de tejido adiposo subcutáneo, procedentes de 38 partidas de cerdos de tres campañas de montanera. Las muestras correspondieron con las categorías de alimentación contempladas en la Norma de Calidad: 251 fueron de bellota, 164 de recebo, 197 de campo y 137 de cebo

  12. Study of point defects in bismuth

    International Nuclear Information System (INIS)

    Bois, P.

    1987-03-01

    Single crystalline samples of bismuth, pure and n or p - doped by adding tellurium or tin, were electron irradiated at low temperature (4.2 K and 20 K). In the energy range 0.7 - 2.5 MeV, a displacement threshold energy of 13 eV and an athermal recombination volume of 150 atomic volumes were determined. Joint measurements of resistivity, magnetotransport and positron annihilation enabled to precised the nature of the annealing stages: 40-50 K, free migration of interstitials; 90-120 K long range migration of vacancy. Point defects have according to their nature a different effect on the electronic properties of bismuth: isolated Frenkel pairs are globally donnors with a charge of + 0.16 e- and the vacancy is donnor, which seems to attribute to it a negative formation volume. A simple model with non-deformating bands is no longer sufficient to explain the behaviour under irradiation: one has to take into account an acceptor level with a charge of - 0,27 e-, linked to the cascade-type defects and resonating with the valence band. It's position in the band overlap and it's width (8 meV) could be precised. In first approximation this coupling with less mobile carriers does not affect the simple additive rule which exists for relaxation times. Some yet obscure magnetic properties seem to be linked to this defect level [fr

  13. Determining the background levels of bismuth in tissues of wild game birds: a first step in addressing the environmental consequences of using bismuth shotshells

    International Nuclear Information System (INIS)

    Jayasinghe, R.; Tsuji, L.J.S.; Gough, W.A.; Karagatzides, J.D.; Perera, D.; Nieboer, E.

    2004-01-01

    Bismuth shotshells have been approved as a 'nontoxic' alternative to lead in North America. Approval was based on a limited number of studies; even background levels of bismuth in wildfowl were unknown. We report on the concentration of bismuth (and lead) in muscle and liver tissues of wildfowl (Anas platyrhynchos, Anas acuta, Anas crecca, Branta canadensis, Chen caerulescens) harvested with lead shotshell. Average liver-bismuth levels detected in the present study (e.g., teal, 0.05 μg/g dw; mallard, 0.09 μg/g dw) suggest analytical error in other studies examining the effects of bismuth in birds. Significant positive relationships between bismuth- and lead-tissue levels for muscle when all species were combined (and for B. canadensis and C. caerulescens separately) can be explained by noting that bismuth is a contaminant of lead. Thus, more research is recommended to confirm the appropriateness of bismuth as a 'nontoxic' shot alternative

  14. Bismuth(III) trifluoromethanesulfonate catalyzed ring opening reaction of mono epoxy oleochemicals to form keto and diketo derivatives

    Science.gov (United States)

    Using a catalytic system, methyl oleate is transformed into long chain keto and diketo derivatives via an epoxide route. Methyl 9(10)-oxooctadecanoate and methyl 9,10-dioxooctadecanoate were made by a ring opening reaction of epoxidized methyl oleate using bismuth triflate catalyst. Lower reaction t...

  15. Engineering Model Propellant Feed System Development for an Iodine Hall Thruster Demonstration Mission

    Science.gov (United States)

    Polzin, Kurt A.

    2016-01-01

    CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload, providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cu cm and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high (Delta)v maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Recently, work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) 2 that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. 3, 4 Iodine stores as a dense solid at very low pressures, making it acceptable as a propellant on a secondary payload. It has exceptionally high ?Isp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing the potential for systems-level advantages over mid-term high power electric propulsion options. Iodine flow can also be thermally regulated, subliming at relatively low temperature (system. Finally, a cold surface can be installed in a vacuum test chamber on which expended iodine propellant can deposit. In addition, the temperature doesn't have to be extremely cold to maintain a low vapor pressure in the vacuum chamber (it is under 10(exp -6) torr at -75 C), making it possible to 'cryopump' the propellant with lower-cost recirculating refrigerant-based systems as opposed to using liquid nitrogen or low temperature gaseous helium cryopanels. In the present paper, we describe the design and testing of the engineering model propellant feed system for iSAT (see Fig. 1). The feed system is based around an iodine propellant reservoir and two proportional control

  16. Evaluation of the mixing system for the West Valley melter feed hold tank

    Energy Technology Data Exchange (ETDEWEB)

    Fow, C.L.; Kurath, D.E.; Pulsipher, B.A.

    1989-01-01

    High-level radioactive liquid wastes are currently stored in underground tanks at several Department of Energy facilities. The current plan for management of these wastes is to convert them to a durable borosilicate glass, then isolate the glass in a deep geologic repository. The process for converting the wastes to glass involves mixing the high-level wastes with glass-forming chemicals, then transforming the resulting slurry into glass using a high-temperature furnace known as a slurry-fed ceramic melter. Maintaining the quality of the glass product and proficient melter operation depends on the ability of the waste slurry preparation and feed systems to produce and maintain a homogeneous mixture of waste and glass-former materials. This document reviews current technology. 11 refs., 18 figs., 15 tabs.

  17. A Novel Feed-Forward Modeling System Leads to Sustained Improvements in Attention and Academic Performance.

    Science.gov (United States)

    McDermott, Ashley F; Rose, Maya; Norris, Troy; Gordon, Eric

    2016-01-28

    This study tested a novel feed-forward modeling (FFM) system as a nonpharmacological intervention for the treatment of ADHD children and the training of cognitive skills that improve academic performance. This study implemented a randomized, controlled, parallel design comparing this FFM with a nonpharmacological community care intervention. Improvements were measured on parent- and clinician-rated scales of ADHD symptomatology and on academic performance tests completed by the participant. Participants were followed for 3 months after training. Participants in the FFM training group showed significant improvements in ADHD symptomatology and academic performance, while the control group did not. Improvements from FFM were sustained 3 months later. The FFM appeared to be an effective intervention for the treatment of ADHD and improving academic performance. This FFM training intervention shows promise as a first-line treatment for ADHD while improving academic performance. © The Author(s) 2016.

  18. Development of Ingredients of the Feed-stuff for Improving Immune system using Centipede grass Extracts

    Energy Technology Data Exchange (ETDEWEB)

    Bai, Hyoungwoo; Chung, Byungyeoup; Lee, Seungsik; Lee, Sungbeom

    2013-09-15

    The purpose of the this project provides new application areas using naturally occurring flavonoids, cenetpedegrass extracts, for improving immune system and used as ingredients for feed-stuff. In order to provide the immune improving effects of centipedegrass, cell and animal experiments were carried out. Research scope includes determine the effect of centipedegrass extracts on immune functions using LPS-induced RAW cells and found that cytokines, IL-6 and IL-10, which were induced by LPS, were reduced by inhibiting phosphorylation of STAT-3, determine the effects of immune stimulating activity of centipedegrass in animals, cenetipedegrass extracts were administrated once a day for 2 weeks. After treated with LPS, immune suppressor, cytokines were down regulated, however, the cytokines in the group pretreated with centipedegrass extracts, were not down regulated as much as non treated group. The overall mechanism of immune stimulating effect of centipedegrass extracts, was that STAT-3 phosphorylation was inhibited by contipedegrass extracts.

  19. Water feed and effluent treatment for hydrogen sulfide-water system

    International Nuclear Information System (INIS)

    Spevack, J.S.

    1981-01-01

    This invention provides a feed and effluent treatment system for improving the recovery of a gas (e.g. H 2 S) from solution in a liquid (e.g. water) when the liquid also contains dissolved nonvolatile components (e.g. the salts of sea water) at low temperatures. In a gas/liquid contact process in which the gas is at least partially soluble in the liquid, a portion of the liquid is extracted after it passes through a hot zone, the pressure of the liquid is reduced by flashing it through pressure reduction means to remove a portion of the dissolved gas, and the gas thus recovered is returned to the process

  20. Analysis of the Thermal Characteristics of Machine Tool Feed System Based on Finite Element Method

    Science.gov (United States)

    Mao, Xiaobo; Mao, Kuanmin; Du, Yikang; Wang, Fengyun; Yan, Bo

    2017-09-01

    The loading of mobile heat source and boundary conditions setting are difficult problems in the analysis of thermal characteristics of machine tools. Taking the machine tool feed system as an example, a novel method for loading of mobile heat source was proposed by establishing a function which was constructed by the heat source and time. The convective heat transfer coefficient is the key parameter of boundary conditions, and it varies with the temperature. In this paper, a model of “variable convection heat transfer coefficient” was proposed, and the setting of boundary conditions of thermal analysis was closer to the real situation. Finally, comparing results of above method and experimental data, the accuracy and validity of this method was proved, meanwhile, the simulation calculation and simulation time was reducing greatly.

  1. Integrated DNA walking system to characterize a broad spectrum of GMOs in food/feed matrices.

    Science.gov (United States)

    Fraiture, Marie-Alice; Herman, Philippe; Lefèvre, Loic; Taverniers, Isabel; De Loose, Marc; Deforce, Dieter; Roosens, Nancy H

    2015-08-14

    In order to provide a system fully integrated with qPCR screening, usually used in GMO routine analysis, as well as being able to detect, characterize and identify a broad spectrum of GMOs in food/feed matrices, two bidirectional DNA walking methods targeting p35S or tNOS, the most common transgenic elements found in GM crops, were developed. These newly developed DNA walking methods are completing the previously implemented DNA walking method targeting the t35S pCAMBIA element. Food/feed matrices containing transgenic crops (Bt rice or MON863 maize) were analysed using the integrated DNA walking system. First, the newly developed DNA walking methods, anchored on the sequences used for the p35S or tNOS qPCR screening, were tested on Bt rice that contains these two transgenic elements. Second, the methods were assessed on a maize sample containing a low amount of the GM MON863 event, representing a more complex matrix in terms of genome size and sensitivity. Finally, to illustrate its applicability in GMO routine analysis by enforcement laboratories, the entire workflow of the integrated strategy, including qPCR screening to detect the potential presence of GMOs and the subsequent DNA walking methods to characterize and identify the detected GMOs, was applied on a GeMMA Scheme Proficiency Test matrix. Via the characterization of the transgene flanking region between the transgenic cassette and the plant genome as well as of a part of the transgenic cassette, the presence of GMOs was properly confirmed or infirmed in all tested samples. Due to their simple procedure and their short time-frame to get results, the developed DNA walking methods proposed here can be easily implemented in GMO routine analysis by the enforcement laboratories. In providing crucial information about the transgene flanking regions and/or the transgenic cassettes, this DNA walking strategy is a key molecular tool to prove the presence of GMOs in any given food/feed matrix.

  2. Performance evaluation of PRIDE UNDA system with feed material of pyroprocessing

    Energy Technology Data Exchange (ETDEWEB)

    An, Su Jung; Seo, Hee; Lee, Chae Hun; Ahn, Seong Kyu; Park, Se Hwan; Ku, Jeong Hoe [Nonproliferation System Research Division, KAERI, Daejeon (Korea, Republic of)

    2016-12-15

    The PRIDE (PyRoprocessing Integrated inactive DEmonstration facility) provides unique opportunities not only to develop process technologies but also to test various types of safeguards equipment for nuclear material accountancy (NMA), containment and surveillance (C/S), as well as process monitoring. In this regard, we developed a UNDA (Unified Non-Destructive Assay) system by incorporating three different non-destructive assay (NDA) techniques, i.e., neutron, gamma-ray, and mass measurements, for the testing of NMA of PRIDE. One of the main advantages of the UNDA is reducing measurement time and systematic error related to sample handling and placement by integrating the NDA techniques. The {sup 235}U mass can be determined from the {sup 238}U mass and uranium enrichment ({sup 235}U/{sup 238}U). The {sup 238}U mass is acquired from total neutron counting using neutron detection module of UNDA, with the information on the spontaneous fission neutron yield of {sup 238}U and neutron detection efficiency of the system. Total sample mass is measured by using the mass balance. In our previous studies, the UNDA was developed and characterized for a calibration source. In this study, the UNDA was installed in PRIDE facility, and the performance of the UNDA was evaluated with feed material of oxide reduction process. In this study, the performance of the UNDA was evaluated with feed material of oxide reduction process: UO2 porous pellets made of DU. The neutron net count rate was obtained as functions of 238U mass. The measured net count rate fitted by linear regression showed good linearity. In addition, the 238U mass of unknown source was determined using the information of the detection efficiency and count rate obtained from the UNDA.

  3. Deterministic quantum teleportation with feed-forward in a solid state system.

    Science.gov (United States)

    Steffen, L; Salathe, Y; Oppliger, M; Kurpiers, P; Baur, M; Lang, C; Eichler, C; Puebla-Hellmann, G; Fedorov, A; Wallraff, A

    2013-08-15

    Engineered macroscopic quantum systems based on superconducting electronic circuits are attractive for experimentally exploring diverse questions in quantum information science. At the current state of the art, quantum bits (qubits) are fabricated, initialized, controlled, read out and coupled to each other in simple circuits. This enables the realization of basic logic gates, the creation of complex entangled states and the demonstration of algorithms or error correction. Using different variants of low-noise parametric amplifiers, dispersive quantum non-demolition single-shot readout of single-qubit states with high fidelity has enabled continuous and discrete feedback control of single qubits. Here we realize full deterministic quantum teleportation with feed-forward in a chip-based superconducting circuit architecture. We use a set of two parametric amplifiers for both joint two-qubit and individual qubit single-shot readout, combined with flexible real-time digital electronics. Our device uses a crossed quantum bus technology that allows us to create complex networks with arbitrary connecting topology in a planar architecture. The deterministic teleportation process succeeds with order unit probability for any input state, as we prepare maximally entangled two-qubit states as a resource and distinguish all Bell states in a single two-qubit measurement with high efficiency and high fidelity. We teleport quantum states between two macroscopic systems separated by 6 mm at a rate of 10(4) s(-1), exceeding other reported implementations. The low transmission loss of superconducting waveguides is likely to enable the range of this and other schemes to be extended to significantly larger distances, enabling tests of non-locality and the realization of elements for quantum communication at microwave frequencies. The demonstrated feed-forward may also find application in error correction schemes.

  4. Effect of Fe2O3 on the physical and structural properties of bismuth silicate glasses

    Science.gov (United States)

    Parmar, Rajesh; Kundu, R. S.; Punia, R.; Aghamkar, P.; Kishore, N.

    2013-06-01

    Iron containing bismuth silicate glasses with compositions 70SiO2ṡ(100-x)Bi2O3ṡxFe2O3 have been prepared using conventional melt-quenching method and their amorphous nature has been investigated using XRD. Density has been measured using Archimedes' principle and molar volume (Vm) have also been estimated. With increase in Fe2O3 content, there is a decrease in density and molar volume of the glass samples. The glass transition temperature (Tg) have been determined using Differential Scanning Calorimetry (DSC) and are observed to increase with increase in Fe2O3 content. In the present glass system bismuth and iron plays the role of network modifier and the symmetry of silicate network goes on increasing with Fe2O3 content and it modifies the physical and structural properties of these glasses.

  5. Compatibility tests on steels in molten lead and lead-bismuth

    International Nuclear Information System (INIS)

    Fazio, C.; Benamati, G.; Martini, C.; Palombarini, G.

    2001-01-01

    The compatibility of steels with liquid lead and liquid lead-bismuth is a critical issue for the development of accelerator-driven system (ADS). In this work the results of a set of preliminary tests carried out in stagnant molten lead at 737 K and in lead-bismuth at 573, 673 and 749 K are summarised. The tests were conducted for 700, 1200, 1500 and 5000 h. Three steels were tested: two martensitic steels (mod. F82H and MANET II) and one austenitic steel (AISI 316L). The martensitic steels underwent oxidation phenomena at the higher testing temperature, due to oxygen dissolved in the melts. At a lower test temperature (573 K) and higher exposure time (5000 h) the oxidation rate of the martensitic steel seems to be lower and the developed oxide layer protective against liquid metal corrosion. The austenitic steel, in turn, exhibited an acceptable resistance to corrosion-oxidation under the test conditions

  6. Performance of dairy cattle under two different feeding systems, as practiced in Kiambu and Nyandarua district of Central Kenya

    International Nuclear Information System (INIS)

    Mbugua, P.N.; Gachuiri, C.K.; Wahome, R.G.; Wanyoike, M.M.; Abate, A.; Munyua, S.J.M.; Kamau, J.M.Z.

    1999-01-01

    A study was carried out in Central Kenya to compare the performance of dairy cattle under two different feeding systems, stall feeding in Kiambu and grazing in Nyandarua. A total of 23 dairy farmers were randomly selected, 11 from the Kiambu district with a total of 61 cows and 12 from Nyandarua district with a total of 102 cows. Data on milk production and reproduction was collected over a period of two years. Stall-fed cattle showed a significantly higher milk yield (P <0.05) than the grazed animals over a 10 month lactation period (3,150 vs 2,299 kg/lactation). In both feeding systems Ayshires performed better than the other breeds. The cross-bred animals compared well with pure-breds in the grazing system. Lactation yield increased with parity for the stall-fed animals while for grazed animals, milk yield declined from the 5th parity onwards. The calving intervals were long for both feeding systems (437 vs 513 days, stall-fed vs grazed, respectively). Services per conception were significantly lower (P <0.05) for stall-fed (1.85 vs 2.36) compared to grazed animals. Calving season did not have any significant effect on milk yield in both feeding systems but animals calving during the wet season, on average, had a slightly higher milk yield. Lactation curves for animals in both feeding systems did not show a distinct peak. Body weight and body condition score varied with the stage of lactation. (author)

  7. Determination of neophytadiene in the subcutaneous fat of Iberian pigs from different feeding systems

    Directory of Open Access Journals (Sweden)

    García-Casco, J. M.

    2013-04-01

    Full Text Available This study was carried out in order to determine the relationship between the content of a branched hydrocarbon (neophytadiene in the subcutaneous fat and the feeding system of Iberian pigs during the fattening period previous to slaughter. Thirty-six batches of Iberian pigs, belonging to the four categories of feeding systems described in the Spanish legislation (Bellota, Recebo, Campo and Cebo were studied. These categories differ in their degree of utilization of the natural resources (acorn and pasture of the extensive rearing system or in their level of replacement by concentrated feed. SPE combined with GC-MS techniques were carried out to isolate and to identify hydrocarbons. Recebo and Bellota batches showed the highest levels of neophytadiene content, followed by Campo batches, and finally, batches of the Cebo category. The results showed a great variability between batches from the same feeding category, mainly from Bellota, Recebo and Campo categories, which makes the classification of the animals in these three categories difficult. However, the animals from the Cebo category were correctly classified when reared in intensive conditions.El objetivo del trabajo se centró en determinar el contenido de un hidrocarburo ramificado (neofitadieno en la grasa subcutánea del cerdo ibérico, y su relación con el tipo de alimentación recibida durante la etapa de cebo previa al sacrificio (en la fase final de cebo. Para ello, se estudiaron treinta y seis lotes de cerdos Ibéricos, pertenecientes a las cuatro categorías de calidad en base a la alimentación de los animales establecidas en la Norma de Calidad (Bellota, Recebo, Campo y Cebo. Estas categorías se diferencian en el grado de aprovechamiento de los recursos naturales de la dehesa (bellotas y hierba y en el nivel de sustitución de los mismos por piensos concentrados. Para el aislamiento e identificación de los hidrocarburos se utilizaron técnicas de SPE combinadas con GC-MS. Los

  8. Sensitivity analysis of hybrid power systems using Power Pinch Analysis considering Feed-in Tariff

    International Nuclear Information System (INIS)

    Mohammad Rozali, Nor Erniza; Wan Alwi, Sharifah Rafidah; Manan, Zainuddin Abdul; Klemeš, Jiří Jaromír

    2016-01-01

    Feed-in Tariff (FiT) has been one of the most effective policies in accelerating the development of renewable energy (RE) projects. The amount of RE electricity in the FiT purchase agreement is an important decision that has to be made by the RE project developers. They have to consider various crucial factors associated with RE system operation as well as its stochastic nature. The presented work aims to assess the sensitivity and profitability of a hybrid power system (HPS) in cases of RE system failure or shutdown. The amount of RE electricity for the FiT purchase agreement in various scenarios was determined using a novel tool called On-Grid Problem Table based on the Power Pinch Analysis (PoPA). A sensitivity table has also been introduced to assist planners to evaluate the effects of the RE system's failure on the profitability of the HPS. This table offers insights on the variance of the RE electricity. The sensitivity analysis of various possible scenarios shows that the RE projects can still provide financial benefits via the FiT, despite the losses incurred from the penalty levied. - Highlights: • A Power Pinch Analysis (PoPA) tool to assess the economics of an HPS with FiT. • The new On-Grid Problem Table for targeting the available RE electricity for FiT sale. • A sensitivity table showing the effect of RE electricity changes on the HPS profitability.

  9. Study on the extraction of rare earth elements in liquid bismuth

    International Nuclear Information System (INIS)

    Harada, M.; Adachi, M.; Kai, Y.; Koike, K.

    1987-01-01

    Three factors, which are important for the extraction of rare earth elements in liquid bismuth - molten salt system, were studied, i. e., the equilibrium distribution of neodymium, samarium and bismuth between molten LiCl - liquid Bi-Li alloys, the extraction rate of rare earths, and the characteristics of the extractor with drop dispersion. The rare earth elements were extracted through redox reactions. In high range of Li-mole fraction in the alloy phase, X Li , the distribution of neodymium and bismuth in the salt phase markedly increased as X Li increased. The anomalous increase is attributed to the formation of the compound comprised of Nd, Li, Bi and oxygen in the salt phase. The redox reaction processes were very fast and the extraction rates for rare earths are controlled by the diffusion processes of the solute and the metallic lithium. The process for the formation of liquid metal drops in the continuous phase is predictable from semiempirical correlations reported for aqueous solution - organic solvent systems. The height of droplet bed being accumulated on drop settling portion is predictable from the coalescence time of single drop to a flat metal interface. The coalescence of metal drop to clean interface was very fast. The extractor type of liquid metal dispersion in molten salt is suitable for the extraction process in the fuel reprocessing of MSR or MSBR. (author)

  10. Growth of juvenile Atlantic cod Gadus morhua in land-based recirculation systems: Effects of feeding regime, photoperiod and diet

    DEFF Research Database (Denmark)

    Fülberth, Michael; Moran, Damian; Jarlbæk, Henrik

    2009-01-01

    feeding duration. In each RAS unit three diets (A, B and C) were tested, which were broadly similar in composition but from different manufacturers. Water exchange rate averaged 10–19% in the three recirculation systems, and key water quality parameters such as NH4+ and CO2 remained at low effect......The combined effect of feeding regime and photoperiod on the growth of juvenile Atlantic cod Gadus morhua in land-based recirculating aquaculture systems (RAS) was examined using three different commercial diets. Fish of 8–10 g were reared in 1 m3 tanks at an initial density of 10 kg m− 3 for 78 d...

  11. Management factors affecting aggression in dynamic group housing systems with electronic sow feeding - a field trial

    DEFF Research Database (Denmark)

    Sørensen, L S; Bertelsen, D; Jensen, K H

    1999-01-01

    A series of 24-h video studies on four commercial Danish pig herds investigated the behaviour of pregnant sows kept in dynamic groups (72 to 200 sows) with electronic sow feeding (ESF). The herds mainly differed with respect to provision of a layer of unchopped straw as bedding material......, the frequency of introduction/removal of animals, space allowance in the lying area, group size and number of feeding stations, and starting times for the feeding cycle. All herds had one feeding cycle per 24 h. Six 24-h video recordings in the most settled period with respect to rank relationships (2 to 12...

  12. Assessment of Reproductive Performance and Abortion Occurrence of Boer Goats as Influenced by Farm Systems and Feeding Practices

    Directory of Open Access Journals (Sweden)

    Norhazirah, A.H.

    2016-12-01

    Full Text Available The objective of this study was to evaluate the effect of farm systems (intensive and semi-intensive and feeding practices on reproductive performance (kidding rate and abortion occurrence of female Boer goats in Peninsular Malaysia. By using a survey-purposive sampling approach, a total of 212 goat farms were surveyed and 123 farms rearing Boer goats either in intensive or semi-intensive farm system with at least of a year of operation were included in the analysis. Data on feeding practices were also gathered. In both farm systems, majority of the goat producers fed their goats twice a day and about half of them (48.6% provided feed supplement to the pregnant goat. This feeding practice was mentioned as a method to improve the kidding rate. However, no significant different was found between the two farm systems in kidding rate (P>0.05: intensive 1.19 ? 0.09; semi-intensive 1.10 ? 0.07. In addition, the abortion incidence was rare, particularly in early and late pregnancy in intensive and semi-intensive farm systems (p>0.05; X2 = 7.57 and 2.21, respectively. In conclusion, the rearing Boer female goats either in intensive or semi-intensive farm systems does not affect their kidding rate and abortion frequency.

  13. Granule size distributions after twin-screw granulation - Do not forget the feeding systems.

    Science.gov (United States)

    Meier, R; Thommes, M; Rasenack, N; Moll, K-P; Krumme, M; Kleinebudde, P

    2016-09-01

    The aim of this study was to investigate the influence of qualitatively different powder feeder performances on resulting granule size distributions after twin-screw granulation of a highly drug loaded, hydrophobic mixture and a mannitol powder. It was shown that powder feeder related problems usually cannot be identified by trusting in the values given by the feeder. Therefore, a newly developed model for the evaluation of the performance of powder feeders was introduced and it was tried to connect this model to residence time distributions in twin-screw granulation processes. The influence of feeder performances on resulting granule size distributions varied, depending on the applied screw configuration and the used powder. Regarding the hydrophobic and highly drug loaded formulation, which was granulated at an L/S-ratio of 0.5, a pure conveying screw and a medium kneading configuration, consisting of 60° kneading blocks were negatively influenced by poor feeder settings. For optimal settings more narrow distributions could be obtained. For an extensive kneading configuration good and poor settings resulted in mono-modal granule size distributions but were differing in the overall size. Mannitol, a model substance for a liquid sensitive formulation was granulated at an L/S-ratio of 0.075. It was even more important to maintain optimal feeding as mannitol was highly affected by poor feeder performances. Even an extensive kneading configuration could not level the errors in powder feeder performance, resulting in qualitatively different granule size distributions. The results of this study demonstrate the importance of detailed knowledge about applied feeding systems to gain optimal performance in twin-screw granulation. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Heavy Metals in Notifications of Rapid Alert System for Food and Feed

    Science.gov (United States)

    Pigłowski, Marcin

    2018-01-01

    Heavy metals represent the fourth most often notified hazard category in the Rapid Alert System for Food and Feed (RASFF) from 1980–2016. The goal of the study was to examine the similarities in notifications of particular heavy metals within the RASFF year, product category, notifying country, country of origin, notification basis, notification type, distribution status, risk decision, and action taken, taking into account the particular product type, such as food, food contact material, and feed. The data originated from the RASFF database. Cluster analysis on pivot tables was applied using joining and two-way joining methods. Most notifications concerned food, in which the highest number were related to mercury, cadmium, chromium, lead, arsenic, and nickel. Notifications were mainly related to fish and food contact materials, in addition to fruits and vegetables, seafood, and dietetic food. The number of notifications decreased in 2015 and 2016. The majority of products were notified by Italy, Spain, Germany, and France. The notified products originated mainly from China and Spain. The notification was usually based on official controls on the market, as well as border controls. The notification types were mainly information, alert, and border rejections. Products were not frequently distributed due to distribution restriction to the notifying country or the possibility of distribution to the market. A risk decision was not usually made. The taken actions included re-dispatch of products, withdrawal from the market, or destruction. The data on heavy metals from the RASFF database can help European and national authorities in shaping public health. PMID:29461471

  15. Heavy Metals in Notifications of Rapid Alert System for Food and Feed

    Directory of Open Access Journals (Sweden)

    Marcin Pigłowski

    2018-02-01

    Full Text Available Heavy metals represent the fourth most often notified hazard category in the Rapid Alert System for Food and Feed (RASFF from 1980–2016. The goal of the study was to examine the similarities in notifications of particular heavy metals within the RASFF year, product category, notifying country, country of origin, notification basis, notification type, distribution status, risk decision, and action taken, taking into account the particular product type, such as food, food contact material, and feed. The data originated from the RASFF database. Cluster analysis on pivot tables was applied using joining and two-way joining methods. Most notifications concerned food, in which the highest number were related to mercury, cadmium, chromium, lead, arsenic, and nickel. Notifications were mainly related to fish and food contact materials, in addition to fruits and vegetables, seafood, and dietetic food. The number of notifications decreased in 2015 and 2016. The majority of products were notified by Italy, Spain, Germany, and France. The notified products originated mainly from China and Spain. The notification was usually based on official controls on the market, as well as border controls. The notification types were mainly information, alert, and border rejections. Products were not frequently distributed due to distribution restriction to the notifying country or the possibility of distribution to the market. A risk decision was not usually made. The taken actions included re-dispatch of products, withdrawal from the market, or destruction. The data on heavy metals from the RASFF database can help European and national authorities in shaping public health.

  16. Impact of organic nutrient load on biomass accumulation, feed channel pressure drop increase and permeate flux decline in membrane systems

    KAUST Repository

    Bucs, Szilard

    2014-12-01

    The influence of organic nutrient load on biomass accumulation (biofouling) and pressure drop development in membrane filtration systems was investigated. Nutrient load is the product of nutrient concentration and linear flow velocity. Biofouling - excessive growth of microbial biomass in membrane systems - hampers membrane performance. The influence of biodegradable organic nutrient load on biofouling was investigated at varying (i) crossflow velocity, (ii) nutrient concentration, (iii) shear, and (iv) feed spacer thickness. Experimental studies were performed with membrane fouling simulators (MFSs) containing a reverse osmosis (RO) membrane and a 31 mil thick feed spacer, commonly applied in practice in RO and nanofiltration (NF) spiral-wound membrane modules. Numerical modeling studies were done with identical feed spacer geometry differing in thickness (28, 31 and 34 mil). Additionally, experiments were done applying a forward osmosis (FO) membrane with varying spacer thickness (28, 31 and 34 mil), addressing the permeate flux decline and biofilm development. Assessed were the development of feed channel pressure drop (MFS studies), permeate flux (FO studies) and accumulated biomass amount measured by adenosine triphosphate (ATP) and total organic carbon (TOC).Our studies showed that the organic nutrient load determined the accumulated amount of biomass. The same amount of accumulated biomass was found at constant nutrient load irrespective of linear flow velocity, shear, and/or feed spacer thickness. The impact of the same amount of accumulated biomass on feed channel pressure drop and permeate flux was influenced by membrane process design and operational conditions. Reducing the nutrient load by pretreatment slowed-down the biofilm formation. The impact of accumulated biomass on membrane performance was reduced by applying a lower crossflow velocity and/or a thicker and/or a modified geometry feed spacer. The results indicate that cleanings can be delayed

  17. Evolution of Regolith Feed Systems for Lunar ISRU 02 Production Plants

    Science.gov (United States)

    Mueller, Robert P.; Townsend, Ivan I., III; Mantovani, James G.; Metzger, Philip T.

    2010-01-01

    The In-Situ Resource Utilization (ISRU) project of the NASA Constellation Program, Exploration Technology Development Program (ETDP) has been engaged in the design and testing of various Lunar ISRU O2 production plant prototypes that can extract chemically bound oxygen from the minerals in the lunar regolith. This work demands that lunar regolith (or simulants) shall be introduced into the O2 production plant from a holding bin or hopper and subsequently expelled from the ISRU O2 production plant for disposal. This sub-system is called the Regolith Feed System (RFS) which exists in a variety of configurations depending on the O2 production plant oxygen being used (e.g. Hydrogen Reduction, Carbothermal, Molten Oxide Electrolysis). Each configuration may use a different technology and in addition it is desirable to have heat recuperation from the spent hot regolith as an integral part of the RFS. This paper addresses the various RFS and heat recuperation technologies and system configurations that have been developed under the NASA ISRU project since 2007. In addition current design solutions and lessons learned from reduced gravity flight testing will be discussed.

  18. Vapor feed direct methanol fuel cells with passive thermal-fluids management system

    Science.gov (United States)

    Guo, Zhen; Faghri, Amir

    The present paper describes a novel technology that can be used to manage methanol and water in miniature direct methanol fuel cells (DMFCs) without the need for a complex micro-fluidics subsystem. At the core of this new technology is a unique passive fuel delivery system that allows for fuel delivery at an adjustable rate from a reservoir to the anode. Furthermore, the fuel cell is designed for both passive water management and effective carbon dioxide removal. The innovative thermal management mechanism is the key for effective operation of the fuel cell system. The vapor feed DMFC reached a power density of 16.5 mW cm -2 at current density of 60 mA cm -2. A series of fuel cell prototypes in the 0.5 W range have been successfully developed. The prototypes have demonstrated long-term stable operation, easy fuel delivery control and are scalable to larger power systems. A two-cell stack has successfully operated for 6 months with negligible degradation.

  19. Advanced nutrient root-feeding system for conveyor-type cylindrical plant growth facilities for microgravity

    Science.gov (United States)

    Berkovich, Yu. A.; Krivobok, N. M.; Krivobok, A. S.; Smolyanina, S. O.

    2016-02-01

    A compact and reliable automatic method for plant nutrition supply is needed to monitor and control space-based plant production systems. The authors of this study have designed a nutrient root-feeding system that minimizes and regulates nutrient and water supply without loss of crop yields in a space greenhouse. The system involves an ion-exchange fibrous artificial soil (AS) BIONA-V3TM as the root-inhabited medium; a pack with slow-release fertilizer as the main source of nitrogen, phosphorus, and potassium; and a cartridge with granular mineral-rich ionite (GMRI) as a source of calcium, magnesium, sulfur, and iron. A controller equipped with an electrical conductivity meter controls the solution flow and concentration of the solution in the mixing tank at specified values. Experiments showed that the fibrous AS-stabilized pH of the substrate solution within the range of 6.0-6.6 is favorable to the majority of crops. The experimental data confirmed that this technique allowed solution preparation for crops in space greenhouses by means of pumping water through the cartridge and minimization of the AS stock onboard the space vehicle.

  20. Floating rice-culture system for nutrient remediation and feed production in a eutrophic lake.

    Science.gov (United States)

    Srivastava, Ankita; Chun, Seong-Jun; Ko, So-Ra; Kim, Junhwan; Ahn, Chi-Yong; Oh, Hee-Mock

    2017-12-01

    The increased inputs of nutrients have been demonstrated to be a major contributing factor to the eutrophication of lakes and reservoirs which can lead to the production of harmful algal/cyanobacterial blooms and deleteriously affect the aesthetics of water-bodies. Floating plant-culture systems have been widely used for the ecological remediation of eutrophic water in a cost-effective manner. We investigated the applicability of Korean japonica rice variety 'Nampyeong' in a floating-culture system in a eutrophic lake for nutrient uptake and biomass production. Chemical and organic compound compositions were analyzed two times during the growth stages of the rice plant: 98 DAT (days after transplanting) and 165 DAT. Total nitrogen and phosphorus contributed around 1.36 and 0.15 (% dry weight), respectively, in rice plant components at 165 DAT. Crude protein, lipids, fiber and ash were 4.35, 1.91, 23.66 and 5.55 (% dry weight), respectively. In addition, microcystin levels in the rice plant components ranged from 0.0008 to 0.002 μg/g and did not exceed the recommended tolerable limits. These results suggested that the developed floating rice-culture system showed a good potential as a holistic management approach in terms of nutrient reduction, rice production for further use as feed and for bloom control. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Post Feed-in Scheme Photovoltaic System Feasibility Evaluation in Italy: Sicilian Case Studies

    Directory of Open Access Journals (Sweden)

    Riccardo Squatrito

    2014-11-01

    Full Text Available Thanks to national energy policies, over recent years the Italian photovoltaic (PV sector has undergone an extraordinary growth, also affecting the primary sector. In this context, Mediterranean greenhouses are well-adapted to photovoltaic systems because they represent one of the most energy-intensive sectors in agriculture. The Italian feed-in scheme ended at the beginning of 2013, making it necessary to investigate the feasibility of photovoltaic systems devoid of any electricity production-related incentives. In this paper, production cost and profitability analyses of photovoltaic electricity have been conducted, considering Mediterranean solar greenhouses in which, thanks to net metering, all the electricity produced by photovoltaic panels is self-consumed. Our results showed that grid parity is already reached for Sicilian PV systems with a capacity greater than 50 kW. Moreover, net present value, internal rate of return and discounted payback time all demonstrate the high economic convenience of all the photovoltaic investments analyzed, due to the huge savings on energy expenditures.

  2. Grain boundary effects on the mechanical properties of bismuth nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Burek, Michael J.; Jin, Sumin; Leung, Michael C.; Jahed, Zeinab; Wu, Janet [Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1 (Canada); Budiman, Arief Suriadi [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Tamura, Nobumichi; Kunz, Martin [Advanced Light Source, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Tsui, Ting Y., E-mail: tttsui@uwaterloo.ca [Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1 (Canada)

    2011-06-15

    Cylindrical bismuth nanopillars with diameters between 130 and 1100 nm were fabricated by electron beam lithography and electroplating. The microstructure of the electrodeposited bismuth was established to be polycrystalline with a wide distribution of grains from {approx}0.1 to 1 {mu}m in size. A clear transition in the mechanism governing the plastic deformation of bismuth nanopillars is observed as the nanopillar size becomes comparable with the average grain size of 280 nm. In larger nanopillar specimens, where the average grain size is much smaller than the nanopillar diameter, deformation is dominated by grain boundary-mediated mechanisms. When the bismuth nanopillar diameter approaches the average grain size the deformation behavior transitions to a mechanism dominated by dislocation dynamics. This transition is identified by post-compression scanning electron microscopy, strain rate sensitivity, and average flow stresses.

  3. On-line ion exchange preconcentration in a sequential injection lab-on-valve microsystem incorporating a renewable column with ETAAS for the trace-level determination of bismuth in urine and river sediment

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    2001-01-01

    with the preconcentration process of the ensuing sample. The performance of the system is demonstrated for the determination of bismuth. With 2.4 ml sample loading, an enrichment factor of 33.4, a detection limit of 27 ng /l, along with a sampling frequency of 10 was obtained. The relative standard deviation was 2.......3% for the determination of 2.0 mug/l Bi (n = 7). The procedure was validated by determination of bismuth in a certified reference material CRM 320 (river sediment), and by bismuth spike recoveries in two human urine samples....

  4. Analysis of the color alteration and radiopacity promoted by bismuth oxide in calcium silicate cement

    Directory of Open Access Journals (Sweden)

    Marina Angelica Marciano

    2013-07-01

    Full Text Available The aim of the study was to determine if the increase in radiopacity provided by bismuth oxide is related to the color alteration of calcium silicate-based cement. Calcium silicate cement (CSC was mixed with 0%, 15%, 20%, 30% and 50% of bismuth oxide (BO, determined by weight. Mineral trioxide aggregate (MTA was the control group. The radiopacity test was performed according to ISO 6876/2001. The color was evaluated using the CIE system. The assessments were performed after 24 hours, 7 and 30 days of setting time, using a spectrophotometer to obtain the ΔE, Δa, Δb and ΔL values. The statistical analyses were performed using the Kruskal-Wallis/Dunn and ANOVA/Tukey tests (p 3 mm equivalent of Al. The MTA group was statistically similar to the CSC / 30% BO group (p > 0.05. In regard to color, the increase of bismuth oxide resulted in a decrease in the ΔE value of the calcium silicate cement. The CSC group presented statistically higher ΔE values than the CSC / 50% BO group (p < 0.05. The comparison between 24 hours and 7 days showed higher ΔE for the MTA group, with statistical differences for the CSC / 15% BO and CSC / 50% BO groups (p < 0.05. After 30 days, CSC showed statistically higher ΔE values than CSC / 30% BO and CSC / 50% BO (p < 0.05. In conclusion, the increase in radiopacity provided by bismuth oxide has no relation to the color alteration of calcium silicate-based cements.

  5. Studies on bismuth carboxylates—synthesis and characterization of ...

    Indian Academy of Sciences (India)

    synthesis and characterization of a new structural form of bismuth(III) dipicolinate ... Synthesis and X-ray structure of a new bismuth dipicolinate cooordination polymer, {[Bi((2,6-O2C)2C5H3N)((2-HO2C-6-O2C)C5H3N)(H2O)]2.5H2O} (7) are ...

  6. Synthesis, structural and property studies of bismuth containing perovskites

    OpenAIRE

    Chen, Wei-tin

    2009-01-01

    Several bismuth-containing transition metal perovskites that are of interest as potential multiferroic materials have been synthesised and studied. These materials have been structurally characterised and their physical properties have been examined at varying temperatures and pressures. The new series of substituted bismuth ferrite perovskites BixCa1-xFeO3, where x = 0.4 - 1.0, has been prepared. A disordered cubic phase (x = 0.4 - 0.67) and the coexistence of rhombohedral ...

  7. SYSTEMIC ACTIVITY OF NEONICOTINOIDS INFLUENCES FEEDING BY ADULT BLACK VINE WEEVILS ON VARIOUS SPECIES OF ORNAMENTALS

    Science.gov (United States)

    The black vine weevil (BVW) is a serious pest of ornamental nursery crops. The larval stage feeds on the roots of ornamental plants and small fruits often stunting or killing the plants. The adults feed on the foliage of ornamental plants. A standard management technique is to apply foliar treatm...

  8. Performance comparison of metallic, actinide burning fuel in lead-bismuth and sodium cooled fast reactors

    International Nuclear Information System (INIS)

    Weaver, K.D.; Herring, J.S.; Macdonald, P.E.

    2001-01-01

    Various methods have been proposed to ''incinerate'' or ''transmute'' the current inventory of transuranic waste (TRU) that exits in spent light-water-reactor (LWR) fuel, and weapons plutonium. These methods include both critical (e.g., fast reactors) and non-critical (e.g., accelerator transmutation) systems. The work discussed here is part of a larger effort at the Idaho National Engineering and Environmental Laboratory (INEEL) and at the Massachusetts Institute of Technology (MIT) to investigate the suitability of lead and lead-alloy cooled fast reactors for producing low-cost electricity as well as for actinide burning. The neutronics of non fertile fuel loaded with 20 or 30-wt% light water reactor (LWR) plutonium plus minor actinides for use in a lead-bismuth cooled fast reactor are discussed in this paper, with an emphasis on the fuel cycle life and isotopic content. Calculations show that the average actinide burn rate is similar for both the sodium and lead-bismuth cooled cases ranging from -1.02 to -1.16 g/MWd, compared to a typical LWR actinide generation rate of 0.303 g/MWd. However, when using the same parameters, the sodium-cooled case went subcritical after 0.2 to 0.8 effective full power years, and the lead-bismuth cooled case ranged from 1.5 to 4.5 effective full power years. (author)

  9. Iron modified structural and optical spectral properties of bismuth silicate glasses

    Science.gov (United States)

    Parmar, Rajesh; Kundu, R. S.; Punia, R.; Aghamkar, P.; Kishore, N.

    2014-10-01

    Iron bismuth silicate glasses have been successfully synthesized by melt quenching technique. The amorphous nature of the glass samples is ascertained by the XRD patterns. The values of density, molar volume and crystalline volume have been measured and are found to decrease with increase in iron content. The glass transition temperature measured using Differential Scanning Calorimetry (DSC) also varies with increase in Fe2O3 content. The Raman and FTIR spectra of the studied glass system taken at room temperature suggests that Fe2O3 modifies the structure of bismuth silicate glasses and it acts as both network modifier as well as network former. Bismuth also plays the role of both network modifier (BiO6 octahedra) as well as network former (BiO3 pyramids) and SiO2 exists in SiO4 tetrahedral structural units with two non-bridging oxygens. The Hydrogenic excitonic model is found to be applicable to the studied glass compositions. The variation in Urbach energy value observed for the studied glass samples suggests the possibility of increase in the number of glass defects. The metallization criterion for the synthesized glass samples is determined and found to be in the range 0.30-0.38.

  10. Morphophysiological study of digestive system litter-feeding termite Cornitermes cumulans (Kollar, 1832).

    Science.gov (United States)

    de Sousa, Géssica; Dos Santos, Vânia Cristina; de Figueiredo Gontijo, Nelder; Constantino, Reginaldo; de Oliveira Paiva E Silva, Gabriela; Bahia, Ana Cristina; Gomes, Fabio Mendonça; de Alcantara Machado, Ednildo

    2017-06-01

    Termites are the major decomposers of lignocellulosic biomass on Earth and are commonly considered as biological reactor models for lignocellulose degradation. Despite their biotechnological potential, few studies have focused on the morphophysiological aspects of the termite digestive system. We therefore analyze the morphology, ultrastructure and gut luminal pH of the digestive system in workers of the litter-feeding termite Cornitermes cumulans (Blattodea: Termitidae). Their digestive system is composed of salivary glands and an alimentary canal with a pH ranging from neutral to alkaline. The salivary glands have an acinar structure and present cells with secretory characteristics. The alimentary canal is differentiated into the foregut, midgut, mixed segment and hindgut, which comprises the ileum (p1), enteric valve (p2), paunch (p3), colon (p4) and rectum (p5) segments. The foregut has a well-developed chewing system. The midgut possesses a tubular peritrophic membrane and two cell types: digestive cells with secretory and absorptive features and several regenerative cells in mitosis, both cell types being organized into regenerative crypts. The mixed segment exhibits cells rich in glycogen granules. Hindgut p1, p4 and p5 segments have flattened cells with a few apical invaginations related to mitochondria and a thick cuticular lining. Conversely, the hindgut p3 segment contains large cuboid cells with extensive apical invaginations associated with numerous mitochondria. These new insights into the morphophysiology of the digestive system of C. cumulans reveal that it mobilizes lignocellulose components as a nutritional source by means of a highly compartmentalized organization with specialized segments and complex microenvironments.

  11. Synthesis and characterization of superconducting bismuthates

    International Nuclear Information System (INIS)

    Tang, Horngyi.

    1991-01-01

    A new electrosynthetic technique for low-temperature crystal growth of superconducting bismuthates was developed, and its utility demonstrated by growing various high-quality BiO 3 crystals. The crystals of Ba 1-x K x BiO 3 and Ba 1-x Rb x BiO 3 display their T c onset at 31.8k and 28k, respectively, using SQUID magnetometry. The structure of a KBiO 3 x H 2 O single crystal determined by single crystal x-ray diffraction confirms previous results from powder samples that it is isostructural with KSbO 3 . The crystals of Ba 1-x Cs x BiO 3 do not show superconductivity to 4k. Chemical vapor-transport experiments leading to the fabrication of MoS 2 /WSe 2 junctions were also performed and are described in detail

  12. Aggregation and hydrolysis reactions of bismuth alkoxides

    International Nuclear Information System (INIS)

    Whitmire, K.H.; Jones, C.M.; Burkart, M.D.; Hutchinson, J.C.; McKnight, A.L.

    1992-01-01

    This paper reports that new bismuth alkoxide and oxo-alkoxide complexes have been prepared from the salt metathesis reaction of NaOR with BiCl 3 . When R = CH(CF 3 ) 2 , the product is [Bi(μ-OR)(OR) 2 (THF)] 2 . similar work with R = C 6 F 5 has not yielded a simple alkoxide, but complexes of formulation NaBi 3 (μ 3 -O)(OR) 8 (THF), NaBi 4 (μ 3 -O) 2 (OR) 9 (THF) 2 , Na 2 Bi 4 (μ 3 -O) 2 (OR) 10 and Bi 6 (μ 3 -OR)(μ 3 -O) 4 [μ 3 -OBI(OR) 4 ] 3 have been observed. The reaction of BiPh 3 with HOC 6 F 5 , however, did produce the desired alkoxide which has been characterized as [Bi(OR) 2 (μ-OR)(toluene)] 2 and [Bi(OR) 2 (μ-OR)(toluene)] 2 · 2 toluene. The reaction of this alkoxide with NaOC 6 F 5 led to the production of Bi 6 (μ 3 -O) 2 (μ 4 -O)(OR) 12 and NaBi 3 (μ 3 -O)(OR) 8 (THF) 3 . Reaction of BiPh 3 with HOC 6 F 5 in THF led to the formation of Bi 6 (μ 3 -OR)(μ 3 -O) 4 [μ 3 -OBi(OR) 4 ] 3 (THF) 2 . Surprisingly the reaction of BiEt 3 and HOR (R = C 6 F 5 or Ph) displaced only one Et group to give [Et 2 Bi(μ-OR)] oo which exist as infinite chain polymers with alternating Bi-O-Bi backbones. These spiral chains form chiral helices in the crystal lattice. The discovery of high T C superconducting copper oxide phases containing bismuth, lead and thallium has led to this investigation

  13. Ontogeny of the Digestive System of Atlantic Salmon (Salmo salar L.) and Effects of Soybean Meal from Start-Feeding

    Science.gov (United States)

    Sahlmann, Christian; Gu, Jinni; Kortner, Trond M.; Lein, Ingrid; Krogdahl, Åshild; Bakke, Anne Marie

    2015-01-01

    Despite a long history of rearing Atlantic salmon in hatcheries in Norway, knowledge of molecular and physiological aspects of juvenile development is still limited. To facilitate introduction of alternative feed ingredients and feed additives during early phases, increased knowledge regarding the ontogeny of the digestive apparatus in salmon is needed. In this study, we characterized the development of the gastrointestinal tract and accessory digestive organs for five months following hatch by using histological, biochemical and molecular methods. Furthermore, the effects of a diet containing 16.7% soybean meal (SBM) introduced at start-feeding were investigated, as compared to a fishmeal based control diet. Salmon yolk sac alevins and fry were sampled at 18 time points from hatch until 144 days post hatch (dph). Histomorphological development was investigated at 7, 27, 46, 54 and 144 dph. Ontogenetic expression patterns of genes encoding key digestive enzymes, nutrient transporters, gastrointestinal peptide hormones and T-cell markers were analyzed from 13 time points by qPCR. At 7 dph, the digestive system of Atlantic salmon alevins was morphologically distinct with an early stomach, liver, pancreas, anterior and posterior intestine. About one week before the yolk sac was internalized and exogenous feeding was started, gastric glands and developing pyloric caeca were observed, which coincided with an increase in gene expression of gastric and pancreatic enzymes and nutrient transporters. Thus, the observed organs seemed ready to digest external feed well before the yolk sac was absorbed into the abdominal cavity. In contrast to post-smolt Atlantic salmon, inclusion of SBM did not induce intestinal inflammation in the juveniles. This indicates that SBM can be used in compound feeds for salmon fry from start-feeding to at least 144 dph and/or 4-5 g body weight. PMID:25923375

  14. In situ electron beam irradiated rapid growth of bismuth nanoparticles in bismuth-based glass dielectrics at room temperature

    International Nuclear Information System (INIS)

    Singh, Shiv Prakash; Karmakar, Basudeb

    2011-01-01

    In this study, in situ control growth of bismuth nanoparticles (Bi 0 NPs) was demonstrated in bismuth-based glass dielectrics under an electron beam (EB) irradiation at room temperature. The effects of EB irradiation were investigated in situ using transmission electron microscopy (TEM), selected-area electron diffraction and high-resolution transmission electron microscopy. The EB irradiation for 2–8 min enhanced the construction of bismuth nanoparticles with a rhombohedral structure and diameter of 4–9 nm. The average particle size was found to increase with the irradiation time. Bismuth metal has a melting point of 271 °C and this low melting temperature makes easy the progress of energy induced structural changes during in situ TEM observations. This is a very useful technique in nano-patterning for integrated optics and other applications.

  15. Waste Feed Delivery System Phase 1 Preliminary Reliability and Availability and Maintainability Analysis [SEC 1 and 2

    International Nuclear Information System (INIS)

    CARLSON, A.B.

    1999-01-01

    The document presents updated results of the preliminary reliability, availability, maintainability analysis performed for delivery of waste feed from tanks 241-AZ-101 and 241-AN-105 to British Nuclear Fuels Limited, inc. under the Tank Waste Remediation System Privatization Contract. The operational schedule delay risk is estimated and contributing factors are discussed

  16. Waste Feed Delivery System Phase 1 Preliminary Reliability and Availability and Maintainability Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    CARLSON, A.B.

    1999-11-11

    The document presents updated results of the preliminary reliability, availability, maintainability analysis performed for delivery of waste feed from tanks 241-AZ-101 and 241-AN-105 to British Nuclear Fuels Limited, inc. under the Tank Waste Remediation System Privatization Contract. The operational schedule delay risk is estimated and contributing factors are discussed.

  17. Immunohistological localization of serotonin in the CNS and feeding system of the stable fly stomoxys calcitrans L. (Diptera: muscidae)

    Science.gov (United States)

    Serotonin, or 5-hydroxytryptamine (5-HT), plays critical roles as a neurotransmitter and neuromodulator that control or modulate many behaviors in insects, such as feeding. Neurons immunoreactive (IR)to 5-HT were detected in the central nervous system (CNS) of the larval and adult stages of the stab...

  18. Feed and manure use in low-N-input and high-N-input dairy cattle production systems

    Science.gov (United States)

    Powell, J. Mark

    2014-11-01

    In most parts of Sub-Saharan Africa fertilizers and feeds are costly, not readily available and used sparingly in agricultural production. In many parts of Western Europe, North America, and Oceania fertilizers and feeds are relatively inexpensive, readily available and used abundantly to maximize profitable agricultural production. A case study, dairy systems approach was used to illustrate how differences in feed and manure management in a low-N-input dairy cattle system (Niger, West Africa) and a high-N-input dairy production system (Wisconsin, USA) impact agricultural production and environmental N loss. In Niger, an additional daily feed N intake of 114 g per dairy animal unit (AU, 1000 kg live weight) could increase annual milk production from 560 to 1320 kg AU-1, and the additional manure N could greatly increase millet production. In Wisconsin, reductions in daily feed N intake of 100 g AU-1 would not greatly impact milk production but decrease urinary N excretion by 25% and ammonia and nitrous oxide emissions from manure by 18% to 30%. In Niger, compared to the practice of housing livestock and applying dung only onto fields, corralling cattle or sheep on cropland (to capture urinary N) increased millet yields by 25% to 95%. The additional millet grain due to dung applications or corralling would satisfy the annual food grain requirements of 2-5 persons; the additional forage would provide 120-300 more days of feed for a typical head of cattle; and 850 to 1600 kg ha-1 more biomass would be available for soil conservation. In Wisconsin, compared to application of barn manure only, corralling heifers in fields increased forage production by only 8% to 11%. The application of barn manure or corralling increased forage production by 20% to 70%. This additional forage would provide 350-580 more days of feed for a typical dairy heifer. Study results demonstrate how different approaches to feed and manure management in low-N-input and high-N-input dairy cattle

  19. Demonstration of a Piston Plug feed System for Feeding Coal/Biomass Mixtures across a Pressure Gradient for Application to a Commercial CBTL System

    Energy Technology Data Exchange (ETDEWEB)

    Santosh Gangwal

    2011-06-30

    Producing liquid transportation fuels and power via coal and biomass to liquids (CBTL) and integrated gasification combined cycle (IGCC) processes can significantly improve the nation's energy security. The Energy Independence and Security Act of 2007 mandates increasing renewable fuels nearly 10-fold to >2.3 million barrels per day by 2022. Coal is abundantly available and coal to liquids (CTL) plants can be deployed today, but they will not become sustainable without large scale CO{sub 2} capture and storage. Co-processing of coal and biomass in CBTL processes in a 60 to 40 ratio is an attractive option that has the potential to produce 4 million barrels of transportation fuels per day by 2020 at the same level of CO{sub 2} emission as petroleum. In this work, Southern Research Institute (Southern) has made an attempt to address one of the major barriers to the development of large scale CBTL processes - cost effective/reliable dry-feeding of coal-biomass mixtures into a high pressure vessel representative of commercial entrained-flow gasifiers. Present method for dry coal feeding involves the use of pressurized lock-hopper arrangements that are not only very expensive with large space requirements but also have not been proven for reliably feeding coal-biomass mixtures without the potential problems of segregation and bridging. The project involved the development of a pilot-scale 250 lb/h high pressure dry coal-biomass mixture feeder provided by TKEnergi and proven for feeding biomass at a scale up to 6 ton/day. The aim of this project is to demonstrate cost effective feeding of coal-biomass mixtures (50:50 to 70:30) made from a variety of coals (bituminous, lignite) and biomass (wood, corn stover, switch grass). The feeder uses a hydraulic piston-based approach to produce a series of plugs of the mixture that act as a seal against high back-pressure of the gasification vessel in to which the mixture is being fed. The plugs are then fed one by one via a

  20. Development and Testing of an Americium/Lanthanide Separation Flowsheet Using Sodium Bismuthate

    Energy Technology Data Exchange (ETDEWEB)

    Jack Law; Bruce Mincher; Troy Garn; Mitchell Greenhalgh; Nicholas Schmitt; Veronica Rutledge

    2014-04-01

    The separation of Am from the lanthanides and curium is a key step in proposed advanced fuel cycle scenarios. The partitioning and transmutation of Am is desirable to minimize the long-term heat load of material interred in a future high-level waste repository. A separation process amenable to process scale-up remains elusive. Given only subtle chemistry differences within and between the ions of the trivalent actinide and lanthanide series this separation is challenging ; however, higher oxidation states of americium can be prepared using sodium bismuthate and separated via solvent extraction using diamylamylphosphonate (DAAP) extraction. Among the other trivalent metals only Ce is also oxidized and extracted. Due to the long-term instability of Am(VI) , the loaded organic phase is readily selectively stripped to partition the actinide to a new acidic aqueous phase. Batch extraction distribution ratio measurements were used to design a flowsheet to accomplish this separation. Additionally, crossflow filtration was investigated as a method to filter the bismuthate solids from the feed solution prior to extraction. Results of the filtration studies, flowsheet development work and flowsheet performance testing using a centrifugal contactor are detailed.

  1. Cloth-based hybridization array system for expanded identification of the animal species origin of derived materials in feeds.

    Science.gov (United States)

    Murphy, Johanna; Armour, Jennifer; Blais, Burton W

    2007-12-01

    A cloth-based hybridization array system (CHAS) previously developed for the detection of animal species for which prohibited materials have been specified (cattle, sheep, goat, elk, and deer) has been expanded to include the detection of animal species for which there are no prohibitions (pig and horse) in Canadian and American animal feeds. Animal species were identified by amplification of mitochondrial DNA sequences by PCR and subsequent hybridization of the amplicons with an array of species-specific oligonucleotide capture probes immobilized on a polyester cloth support, followed by an immunoenzymatic assay of the bound PCR products. The CHAS permitted sensitive and specific detection of meat meals from different animal species blended in a grain-based feed and should provide a useful adjunct to microscopic examination for the identification of prohibited materials in animal feeds.

  2. Bismuth(III) volatilization and immobilization by filamentous fungus Aspergillus clavatus during aerobic incubation.

    Science.gov (United States)

    Boriová, Katarína; Urík, Martin; Bujdoš, Marek; Matúš, Peter

    2015-02-01

    As with many metals, bismuth can be accumulated or transformed by microorganisms. These interactions affect microbial consortia and bismuth environmental behaviour, mobility, and toxicity. Recent research focused specifically on bismuth anaerobic transformation by bacteria and archaea has inspired the evaluation of the mutual interactions between bismuth and filamentous fungi as presented in this article. The Aspergillus clavatus fungus proved resistant to adverse effects from bismuth contamination in culture medium with up to a concentration of 195 µmol L(-1) during static 15- and 30-day cultivation. The examined resistance mechanism includes biosorption to the fungal surface and biovolatilization. Pelletized fungal biomass has shown high affinity for dissolved bismuth(III). Bismuth biosorption was rapid, reaching equilibrium after 50 min with a 0.35 mmol g(-1) maximum sorption capacity as calculated from the Langmuir isotherm. A. clavatus accumulated ≤70 µmol g(-1) of bismuth after 30 days. Preceding isotherm study implications that most accumulated bismuth binds to cell wall suggests that biosorption is the main detoxification mechanism. Accumulated bismuth was also partly volatilized (≤1 µmol) or sequestrated in the cytosol or vacuoles. Concurrently, ≤1.6 µmol of bismuth remaining in solution was precipitated by fungal activity. These observations indicate that complex mutual interactions between bismuth and filamentous fungi are environmentally significant regarding bismuth mobility and transformation.

  3. Feed-induced Dystonias in Children With Severe Central Nervous System Disorders.

    Science.gov (United States)

    Mordekar, Santosh R; Velayudhan, Manjula; Campbell, David I

    2017-09-01

    Dystonias can arise from any painful stimuli in neurologically disabled children. Classically, feed-induced dystonias from mediastinal pain due to severe gastroesophageal reflux disease are described as Sandifer spasm. We report a case series of 12 severely neurologically impaired children with enteral feed-induced dystonias. Intestinal dysmotility was demonstrated in several. Improvements are seen with jejunal feeds or gut rest with total parenteral nutrition. Use of parenteral nutrition in children with severe neurodisability requires thorough discussion with patient groups and commissioners to give clinicians guidelines to standardize care.

  4. A semi-closed recirculating system for the in situ study of feeding and respiration of benthic suspension feeders

    Directory of Open Access Journals (Sweden)

    Marta Ribes

    2000-12-01

    Full Text Available Suspension feeding is one of the most widespread feeding strategies among benthic organisms. However, natural feeding ecology and energetics of benthic suspension feeders are poorly known. The scarcity of field methods, apparatus and protocols that facilitate obtention of reliable in situ data has contributed to this lack of knowledge. A detailed description of an improved semi-closed recirculating system as well as the experimental set up is provided for the study of energetics in benthic suspension feeders. The system, completely submersible and surface-independent, allows us to assess oxygen concentration changes and feeding rates under natural conditions. Methodological examinations are conducted to investigate: a the circulation of the water within the chamber; b the time required for the flushing pump to entirely renew the volume of water of the incubation chambers; c the behavior of the species within the chambers; d the time of acclimation to the chamber conditions for the different species; e the maximum decrease in oxygen concentration without affecting respiration rate; f the time required to detect changes in concentration of the natural food sources. The system and experimental protocol is tested with species from three representative phyla, Porifera, Cnidaria and Tunicata.

  5. Flight feeding systems design and evaluation. Supplement 1: Production guides. [for the Apollo food system

    Science.gov (United States)

    1973-01-01

    The requirements for processing, packaging, testing, and shipment of foods selected for use in the Apollo food system are presented. Specific foodstuffs chosen from the following categories are discussed: (1) soups; (2) juices; (3) breads; (4) meat and poultry products; (5) fruits and nuts; (6) desserts; and (7) beverages. Food procurement for the mobile quarantine facility and for Apollo preflight and postflight activities is also discussed.

  6. Foodborne Norovirus State of Affairs in the EU Rapid Alert System for Food and Feed.

    Science.gov (United States)

    Papapanagiotou, Elias P

    2017-11-25

    The European Union Rapid Alert System for Food and Feed (EU RASFF) database is an invaluable instrument for analyzing notifications involving norovirus in food. The aim of this work was to carry out a thorough research of the alert and border rejection notifications submitted in the RASFF database from its onset until 31 August 2017. Some conclusions of interest were: (i) Denmark, France, Italy, the Netherlands and Norway have contributed the majority of alert notifications as notifying countries, (ii) France and Serbia have been cited more often in alert notifications as countries of origin, (iii) Italy and Spain have submitted the majority of border rejection notifications, (iv) Third Countries implicated more frequently in border rejection notifications for norovirus in bivalve molluscs were Vietnam and Tunisia, whereas in fruits and vegetables were China and Serbia, (v) "risk dispersion" from norovirus-contaminated food was narrow since, in just over half of all alert notifications and all of the border rejection notifications, only up to three countries were involved, and (vi) both raw (oysters and berries) and cooked (mussels) food products can present a health risk to consumers. The information retrieved from the RASFF database on norovirus-contaminated food could prove helpful in the planning of future norovirus risk analysis endeavors.

  7. The Behavioural Manifestations of Dairy Cows in Relation to the Management System Feeding Regime

    Directory of Open Access Journals (Sweden)

    Miloslav Šoch

    2016-05-01

    Full Text Available The aim of the work was to obtain data and formulate knowledge about the behavioural manifestations of dairy cows in relation to the management system of feeding regime on the farm, where Holstein cows are bred. The observations took place on the 13 and 14 August, 2014, when the cows were observed for 24 hours continuously. The ethogram records were recorded after 1 minute and physical activity of cows, periods of rest, ruminating, eating, drinking, defecation, urination and comfort and social behaviour. Cows are herded for milking 3 times a day. It was found  that within 24 hours dairy cows spend on average 10 hours by lying, 8 hours by ruminating, 20 minutes by drinking, 6 hours by eating, they defecate 14 times, urinate 6 times and walk about 430 meters. They are also scratching, licking each other and tail swiping (comfort behaviour within 24 hours. The observations of the responses to serving food indicate that cows actively react to the passage of the food vehicle, not the passage of a piling-up tractor.

  8. Embedding the dynamics of a single delay system into a feed-forward ring

    Science.gov (United States)

    Klinshov, Vladimir; Shchapin, Dmitry; Yanchuk, Serhiy; Wolfrum, Matthias; D'Huys, Otti; Nekorkin, Vladimir

    2017-10-01

    We investigate the relation between the dynamics of a single oscillator with delayed self-feedback and a feed-forward ring of such oscillators, where each unit is coupled to its next neighbor in the same way as in the self-feedback case. We show that periodic solutions of the delayed oscillator give rise to families of rotating waves with different wave numbers in the corresponding ring. In particular, if for the single oscillator the periodic solution is resonant to the delay, it can be embedded into a ring with instantaneous couplings. We discover several cases where the stability of a periodic solution for the single unit can be related to the stability of the corresponding rotating wave in the ring. As a specific example, we demonstrate how the complex bifurcation scenario of simultaneously emerging multijittering solutions can be transferred from a single oscillator with delayed pulse feedback to multijittering rotating waves in a sufficiently large ring of oscillators with instantaneous pulse coupling. Finally, we present an experimental realization of this dynamical phenomenon in a system of coupled electronic circuits of FitzHugh-Nagumo type.

  9. DC Link Current Estimation in Wind-Double Feed Induction Generator Power Conditioning System

    Directory of Open Access Journals (Sweden)

    MARIAN GAICEANU

    2010-12-01

    Full Text Available In this paper the implementation of the DC link current estimator in power conditioning system of the variable speed wind turbine is shown. The wind turbine is connected to double feed induction generator (DFIG. The variable electrical energy parameters delivered by DFIG are fitted with the electrical grid parameters through back-to-back power converter. The bidirectional AC-AC power converter covers a wide speed range from subsynchronous to supersynchronous speeds. The modern control of back-to-back power converter involves power balance concept, therefore its load power should be known in any instant. By using the power balance control, the DC link voltage variation at the load changes can be reduced. In this paper the load power is estimated from the dc link, indirectly, through a second order DC link current estimator. The load current estimator is based on the DC link voltage and on the dc link input current of the rotor side converter. This method presents certain advantages instead of using measured method, which requires a low pass filter: no time delay, the feedforward current component has no ripple, no additional hardware, and more fast control response. Through the numerical simulation the performances of the proposed DC link output current estimator scheme are demonstrated.

  10. Advanced nutrient root feeding system for conveyer-type cylindrical plant growth facilities developed for microgravity

    Science.gov (United States)

    Berkovich, Yuliy A.; Smolyanina, Svetlana O.; Krivobok, Anna; Krivobok, Nikolay

    A new brand of cylindrical conveyer-type space plant growth facilities (PGF) has been created to improve of cosmonauts’ diet in the microgravity conditions. Up to date several ground prototypes of the space PGF have been made and tested: “Phytocycle”, “Vitacycle”, “Phytocycle-LED”, “Phytoconveyer”; now the space PGF “Vitacycle-T” for the Russian segment of the ISS is under developing. In the PGFs the ion-exchange salt-saturated fibrous artificial soil (AS) is used as a root medium. We have proposed the system for enrichment of irrigation water by nutrients to decrease of the AS store required for PGF working during the long space mission. The system includes root modules filled in fibrous ion-exchange AS, the enrichment column with crumble salt-saturation ion-exchange resin and the cassette with slow releasing fertilizer (SRF). Both substrates (ion-exchange resin and SRF) are necessary because of the SRF contains mostly N, P and K but another three essential elements S, Ca, Mg are provided by the ion-exchange resin. In the system water goes throw the enrichment column with ion-exchange resin fertilizing by the nutrients and comes into the mixer cell fertilize equipped with the electrical conductivity sensor. When the signal of the conductivity sensor is coming to the controller it turns on the pump directed the water flow throw the cassette with SRF until the electric conductivity of the solution in the mixer cell will reach the setpoint. The nutrient root feeding system was tested during 88 days when Chinese cabbage grew in PGF “Phytocycle-LED”. The crop has been continuously illuminated by red and blue LEDs in the PPF ratio 7 to 1; an integral PPF level has been (240 ± 10) µmol/(m2×s). There was no renewal of the used fibrous AS during the experiment. The PGF total electric power consumption was of 0,45 kW. The average fresh biomass productivity of the PGF during steady state working mode was equal 135×g/day per m2 of the illuminated

  11. Effects of different rearing and feeding systems on lipid oxidation and antioxidant capacity of freeze-dried egg yolks.

    Science.gov (United States)

    Pignoli, Giovanni; Rodriguez-Estrada, Maria Teresa; Mandrioli, Mara; Barbanti, Lorenzo; Rizzi, Laura; Lercker, Giovanni

    2009-12-23

    Lipid oxidation and antioxidant capacity of freeze-dried egg yolks produced with two rearing systems (battery cages and free-range) and two types of feedings (conventional and organic) were studied. Nine fresh egg yolks of each crossed treatment were pooled, frozen for a month, freeze-dried, vacuum-packed, and kept at -18 degrees C until analysis. No significant differences were observed in the lipid (58.0-62.1%) and total sterol contents (33.0-35.5 g/kg of lipids) of the freeze-dried egg yolks. Free rearing and conventional feeding systems resulted in significantly higher total tocopherol, alpha-tocopherol, and lutein contents, as compared to the battery cage and the organic feed, respectively. However, no significant differences were found in lipid oxidation (peroxide value = 0.7-0.9 mequiv of O(2)/kg of fat; thiobarbituric reactive substances = 1.0-1.3 mg of malonylaldehyde/kg of sample) and cholesterol oxidation (28.8-43.5 mg of cholesterol oxidation products/kg of lipids; 0.08-0.12% oxidized cholesterol) of freeze-dried egg yolks except for 7alpha-hydroxycholesterol, which was significantly lower in samples obtained with organic feed.

  12. Assessment of the effects of fish meal, wheat gluten, soy protein concentrate and feed moisture on extruder system parameters and the technical quality of fish feed

    NARCIS (Netherlands)

    Draganovic, V.; Goot, van der A.J.; Boom, R.M.; Jonkers, J.

    2011-01-01

    Evaluation of feed ingredient functionality plays a vital role in modern fish feed manufacturing practice. The aim of this study was to examine the extrusion behaviour of blends containing alternative protein sources from plant origin to fish meal (FM), such as wheat gluten (WG) and soy protein

  13. The Other Inconvenient Truth: Feeding 9 Billion While Sustaining the Earth System

    Science.gov (United States)

    Foley, J. A.

    2010-12-01

    As the international community focuses on climate change as the great challenge of our era, we have been largely ignoring another looming problem — the global crisis in agriculture, food security and the environment. Our use of land, particularly for agriculture, is absolutely essential to the success of the human race: we depend on agriculture to supply us with food, feed, fiber, and, increasingly, biofuels. Without a highly efficient, productive, and resilient agricultural system, our society would collapse almost overnight. But we are demanding more and more from our global agricultural systems, pushing them to their very limits. Continued population growth (adding more than 70 million people to the world every year), changing dietary preferences (including more meat and dairy consumption), rising energy prices, and increasing needs for bioenergy sources are putting tremendous pressure on the world’s resources. And, if we want any hope of keeping up with these demands, we’ll need to double the agricultural production of the planet in the next 30 to 40 years. Meeting these huge new agricultural demands will be one of the greatest challenges of the 21st century. At present, it is completely unclear how (and if) we can do it. If this wasn’t enough, we must also address the massive environmental impacts of our current agricultural practices, which new evidence indicates rival the impacts of climate change. Simply put, providing for the basic needs of 9 billion-plus people, without ruining the biosphere in the process, will be one of the greatest challenges our species has ever faced. In this presentation, I will present a new framework for evaluating and assessing global patterns of agriculture, food / fiber / fuel production, and their relationship to the earth system, particularly in terms of changing stocks and flows of water, nutrients and carbon in our planetary environment. This framework aims to help us manage the challenges of increasing global food

  14. Grid-connected photovoltaic systems for Malaysian residential sector: Effects of component costs, feed-in tariffs, and carbon taxes

    International Nuclear Information System (INIS)

    Lau, K.Y.; Muhamad, N.A.; Arief, Y.Z.; Tan, C.W.; Yatim, A.H.M.

    2016-01-01

    Blessed with abundant solar radiation, Malaysia has a huge potential for grid-connected PV (photovoltaic) installations, particularly for its fast-growing residential sector. Nevertheless, Malaysia's PV installation capacity is relatively small compared with the global PV capacity. Significantly, the pricing mechanisms for grid-connected PV projects need to be appropriately assessed to build up the public's confidence to invest in PV projects. In this paper, we analyze the effects of component costs, FiTs (feed-in tariffs), and carbon taxes on grid-connected PV systems in Malaysian residential sector using the HOMER (Hybrid Optimization of Multiple Energy Resources) software. Results demonstrate that the implementation of grid-connected PV systems is highly feasible with PV array costs of $ 1120/kW or lower. For higher PV array costs up to $ 2320/kW, introducing an FiT rate three times higher ($ 0.30/kWh) than the grid tariff for a 100 kW grid sale capacity will, NPC-wise, prioritize grid-connected PV systems over the utility grid. By implementing the FiT ($ 0.50/kWh) and the carbon tax ($ 36/metric ton) schemes simultaneously, grid-connected PV systems will remain as the optimal systems even for costly PV arrays (up to $ 4000/kW). The findings are of paramount importance as far as PV pricing variability is concerned. - Highlights: • Grid-connected PV for Malaysian residential sector has been analyzed using HOMER. • Component costs, feed-in tariffs, and carbon taxes affect optimal system types. • Grid-connected PV projects are feasible for low PV array costs ($ 1120/kW or lower). • For higher PV array and inverter costs, feed-in tariffs should be implemented. • Combining feed-in tariffs with carbon taxes are effective for further lowering NPCs.

  15. The role of breast-feeding in infant immune system: a systems perspective on the intestinal microbiome.

    Science.gov (United States)

    Praveen, Paurush; Jordan, Ferenc; Priami, Corrado; Morine, Melissa J

    2015-09-24

    The human intestinal microbiota changes from being sparsely populated and variable to possessing a mature, adult-like stable microbiome during the first 2 years of life. This assembly process of the microbiota can lead to either negative or positive effects on health, depending on the colonization sequence and diet. An integrative study on the diet, the microbiota, and genomic activity at the transcriptomic level may give an insight into the role of diet in shaping the human/microbiome relationship. This study aims at better understanding the effects of microbial community and feeding mode (breast-fed and formula-fed) on the immune system, by comparing intestinal metagenomic and transcriptomic data from breast-fed and formula-fed babies. We re-analyzed a published metagenomics and host gene expression dataset from a systems biology perspective. Our results show that breast-fed samples co-express genes associated with immunological, metabolic, and biosynthetic activities. The diversity of the microbiota is higher in formula-fed than breast-fed infants, potentially reflecting the weaker dependence of infants on maternal microbiome. We mapped the microbial composition and the expression patterns for host systems and studied their relationship from a systems biology perspective, focusing on the differences. Our findings revealed that there is co-expression of more genes in breast-fed samples but lower microbial diversity compared to formula-fed. Applying network-based systems biology approach via enrichment of microbial species with host genes revealed the novel key relationships of the microbiota with immune and metabolic activity. This was supported statistically by data and literature.

  16. Use of Russian technology of ship reactors with lead-bismuth coolant in nuclear power

    International Nuclear Information System (INIS)

    Zrodnikov, A.V.; Chitaykin, V.I.; Gromov, B.F.; Grigoryv, O.G.; Dedoul, A.V.; Toshinsky, G.I.; Dragunov, Yu.G.; Stepanov, V.S.

    2000-01-01

    The experience of using lead-bismuth coolant in Russian nuclear submarine reactors has been presented. The fundamental statements of the concept of using the reactors cooled by lead-bismuth alloy in nuclear power have been substantiated. The results of developments for using lead bismuth coolant in nuclear power have been presented. (author)

  17. Prognostic Value of Bismuth Typing and Modified T-stage in Hilar Cholangiocarcinoma

    Directory of Open Access Journals (Sweden)

    Shengen Yi

    2015-01-01

    Conclusion: The majority of our patients with HCC were characterized as Subtype IV in Bismuth typing and Stage T3 in modified T-stage. Both Bismuth typing and modified T-stage showed prognostic value in HCC. Compared with Bismuth typing, modified T-stage is a better indicator of the resectability of HCC.

  18. 75 FR 34360 - Listing of Color Additives Exempt From Certification; Bismuth Citrate; Confirmation of Effective...

    Science.gov (United States)

    2010-06-17

    .... FDA-2008-C-0098] Listing of Color Additives Exempt From Certification; Bismuth Citrate; Confirmation... final rule amended the color additive regulations by increasing the permitted use level of bismuth... permitted use level of bismuth citrate as a color additive in cosmetics intended for coloring hair on the...

  19. 40 CFR 471.10 - Applicability; description of the lead-tin-bismuth forming subcategory.

    Science.gov (United States)

    2010-07-01

    ...-tin-bismuth forming subcategory. 471.10 Section 471.10 Protection of Environment ENVIRONMENTAL... POINT SOURCE CATEGORY Lead-Tin-Bismuth Forming Subcategory § 471.10 Applicability; description of the lead-tin-bismuth forming subcategory. This subpart applies to discharges of pollutants to waters of the...

  20. 75 FR 14491 - Listing of Color Additives Exempt From Certification; Bismuth Citrate

    Science.gov (United States)

    2010-03-26

    .... FDA-2008-C-0098] Listing of Color Additives Exempt From Certification; Bismuth Citrate AGENCY: Food... amending the color additive regulations to increase the permitted use level of bismuth citrate as a color..., Alexandria, VA 22314. The petition proposed to amend the color additive regulations in Sec. 73.2110 Bismuth...

  1. Efficiency and losses analysis of low-pressure feed water heater in steam propulsion system during ship maneuvering period

    OpenAIRE

    Mrzljak, Vedran; Poljak, Igor; Medica-Viola, Vedran

    2016-01-01

    Dominant propulsion systems of today’s LNG carriers are steam propulsion systems. Although a number of alternatives are developed, only steam propulsion systems in LNG carriers can fulfill a double function: the function of propulsion and on the other side the combustion of large amounts of BOG (Boil Off Gas) in one or more steam generators. In this paper was provided an analysis of the low-pressure feed water heater, as one of the important components of LNG carrier steam propulsion system. ...

  2. Design of A Novel Feed-Forward Control Strategy for A Non-Minimum Phase System

    Science.gov (United States)

    Sharma, Kajal; Pradhan, Raseswari

    2017-08-01

    This paper proposes a new feed-forward control strategy for a plant with non-minimum phase dynamics. A Feed-Forward controller is very essential for controlling plants with time-varying reference signals. However, designing this type of controller is a non-trivial problem in case the plant dynamics is non-minimum-phase. This is because, this controller design involves the concept of inversion of the plant model and inverse of a non-minimum-phase plant model is unstable or non-causal. For this problem, usually an approximate inversion of a plant model is applied. An approach with corrected-approximate-inverse (CAI) method is available for feed forward controller design. After analyzing the results and discussion of this CAI technique, it is seen that although it seems to be working perfectly for small duration of time but its performance is unsatisfactory in case of large span of time. Therefore, in this paper, a new feed-forward control strategy has been designed to erase the above said problem. This method has adopted a simple version of an internal plant-model structure in its time domain. The fixed-structure feed forward controller that is constructed using this method is usually a linear amalgamation of a reference trajectory and its time-derivatives with suitable weighting factors. This control strategy has been verified with appropriate simulation results applied to a studied plant and results are compared with that of the CAI technique.

  3. The role of the endocrine system in feeding-induced tissue-specific circadian entrainment.

    Science.gov (United States)

    Sato, Miho; Murakami, Mariko; Node, Koichi; Matsumura, Ritsuko; Akashi, Makoto

    2014-07-24

    The circadian clock is entrained to environmental cycles by external cue-mediated phase adjustment. Although the light input pathway has been well defined, the mechanism of feeding-induced phase resetting remains unclear. The tissue-specific sensitivity of peripheral entrainment to feeding suggests the involvement of multiple pathways, including humoral and neuronal signals. Previous in vitro studies with cultured cells indicate that endocrine factors may function as entrainment cues for peripheral clocks. However, blood-borne factors that are well characterized in actual feeding-induced resetting have yet to be identified. Here, we report that insulin may be involved in feeding-induced tissue-type-dependent entrainment in vivo. In ex vivo culture experiments, insulin-induced phase shift in peripheral clocks was dependent on tissue type, which was consistent with tissue-specific insulin sensitivity, and peripheral entrainment in insulin-sensitive tissues involved PI3K- and MAPK-mediated signaling pathways. These results suggest that insulin may be an immediate early factor in feeding-mediated tissue-specific entrainment. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  4. Maintenance and improvement of dairy feed quality by radiation for distribution system

    International Nuclear Information System (INIS)

    Kobayashi, Ryoei; Kawamoto, Hidenori; Uegaki, Ryuichi; Tanaka, Osamu; Ando, Sada; Akiyama, Noriaki; Yamada, Akio

    1997-01-01

    With an aim to improve the quality of crude feed and its maintenance, γ-ray radiation was carried out during the steps of preparation and storage of feed and the effects on the fermentation of silage crude feed and mixed feed were investigated. Of the γ-ray radiation significant effects on general constituents in the silage were not observed immediately after the radiation, but it was clear that the contents of fibrous components were apt to increase one month later. The ratio, VBN/TN in the silage decreased with the elevation of radiation dose. Further it was found that radiation at 16 Gy or more is needed to prevent butyric acid fermentation in the silage and aerobic deterioration. In addition, the amount of peroxide lipids was not increased by the γ-radiation, suggesting that no adverse effects on the quality of the feed in silage might be caused by radiation. Thus, it was concluded that γ-radiation in appropriate conditions has favorable influence on silage fermentation. (M.N.)

  5. Bismuth X-ray absorber studies for TES microcalorimeters

    Energy Technology Data Exchange (ETDEWEB)

    Sadleir, J.E. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States) and University of Illinois Physics Department, Urbana, IL 61801 (United States)]. E-mail: sadleir@milkyway.gsfc.nasa.gov; Bandler, S.R. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Brekosky, R.P. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Chervenak, J. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Figueroa-Feliciano, E. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Finkbeiner, F. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Iyomoto, N. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Kelley, R.L. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Kilbourne, C.A. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); King, J.M. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Porter, F.S. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Robinson, I.K. [University of Illinois Physics Department, Urbana, IL 61801 (United States); Saab, T. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Talley, D.J. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2006-04-15

    Bismuth's large atomic number and low carrier density makes it an attractive X-ray absorber material for microcalorimeters. Bismuth's long Fermi wavelength and long mean free paths have motivated much interest in the fabrication of high quality bismuth films to study quantum size effects. Despite such incentives, fabrication of high quality bismuth films has proven difficult, and measured properties of such films are highly variable in the literature. Implementing a bismuth deposition process for TES (superconducting Transition Edge Sensor) device fabrication presents additional challenges particularly at interfaces due to the inherent granularity and surface roughness of its films, its low melting point, and its tendency to diffuse and form undesired intermetallic phases. We report observations of Bi-Cu and Bi-Au diffusion in our devices correlating with large shifts in T{sub c} (superconducting transition temperature). Using SEM and in situ R vs T annealing experiments we have been able to study these diffusion processes and identify their activation temperatures.

  6. Controlled synthesis of bismuth oxyiodide toward optimization of photocatalytic performance

    International Nuclear Information System (INIS)

    Liao, Chenxing; Ma, Zhijun; Chen, Xiaofeng; He, Xin; Qiu, Jianrong

    2016-01-01

    Highlights: • Different bismuth oxyiodide was synthesized. • The hollow Bi 4 O 5 I 2 microspheres was obtained. • Formation mechanism of the hollow structure was discussed in detail. - Abstract: A new investigation on the variation rule of the structure, morphology, chemical composition and photocatalytic performance of bismuth oxyiodide synthesized by solvothermal method as a function of reaction conditions was performed here. The composition and morphology of the product could be determined by X-ray diffraction, thermogravimetric analysis and scanning electron microscopy. The results revealed that the particle size together with content of iodide in bismuth oxyiodide decrease with the increase of the concentration of reaction precursors. Hollow Bi 4 O 5 I 2 microsphere with specific surface area as high as 120.88 m 2 g −1 can be easily synthesized when the concentration of the reaction precursors finally increased to 62.5 mM. Photocatalytic water purification performance of the as-prepared samples was evaluated by using Rhodamine B (RhB) as a model contaminant. The results revealed that the hollow Bi 4 O 5 I 2 exhibited the best performance among all the bismuth oxyodide synthesized here for the degradation of RhB under visible light irradiation. Meanwhile, the formation mechanism of the hierarchical hollow structure of bismuth oxyiodide was investigated by the dissolution-recrystallization mechanism.

  7. Optimal design of feeding system in steel casting by constrained optimization algorithms based on InteCAST

    Directory of Open Access Journals (Sweden)

    Chang-chun Dong

    2016-11-01

    Full Text Available The traditional foundry industry has developed rapidly in recently years due to advancements in computer technology. Modifying and designing the feeding system has become more convenient with the help of the casting software, InteCAST. A common method of designing a feeding system is to first design the initial systems, run simulations with casting software, analyze the feedback, and then redesign. In this work, genetic, fruit fly, and interior point optimizer (IPOPT algorithms were introduced to guide the optimal riser design for the feeding system. The results calculated by the three optimal algorithms indicate that the riser volume has a weak relationship with the modulus constraint; while it has a close relationship with the volume constraint. Based on the convergence rate, the fruit fly algorithm was obviously faster than the genetic algorithm. The optimized riser was also applied during casting, and was simulated using InteCAST. The numerical simulation results reveal that with the same riser volume, the riser optimized by the genetic and fruit fly algorithms has a similar improvement on casting shrinkage. The IPOPT algorithm has the advantage of causing the smallest shrinkage porosities, compared to those of the genetic and fruit fly algorithms, which were almost the same.

  8. Dynamic parameters’ identification for the feeding system of computer numerical control machine tools stimulated by G-code

    Directory of Open Access Journals (Sweden)

    Guangsheng Chen

    2015-08-01

    Full Text Available This study proposed a dynamic parameters’ identification method for the feeding system of computer numerical control machine tools based on internal sensor. A simplified control model and linear identification model of the feeding system were established, in which the input and output signals are from sensors embedded in computer numerical control machine tools, and the dynamic parameters of the feeding system, including the equivalent inertia, equivalent damping, worktable damping, and the overall stiffness of the mechanical system, were solved by the least square method. Using the high-order Taylor expansion, the nonlinear Stribeck friction model was linearized and the parameters of the Stribeck friction model were obtained by the same way. To verify the validity and effectiveness of the identification method, identification experiments, circular motion testing, and simulations were conducted. The results obtained were stable and suggested that inertia and damping identification experiments converged fast. Stiffness identification experiments showed some deviation from simulation due to the influences of geometric error and nonlinear of stiffness. However, the identification results were still of reference significance and the method is convenient, effective, and suited for industrial condition.

  9. Integrated modeling and analysis of ball screw feed system and milling process with consideration of multi-excitation effect

    Science.gov (United States)

    Zhang, Xing; Zhang, Jun; Zhang, Wei; Liang, Tao; Liu, Hui; Zhao, Wanhua

    2018-01-01

    The present researches about feed drive system and milling process are almost independent with each other, and ignore the interaction between the two parts, especially the influence of nonideal motion of feed drive system on milling process. An integrated modeling method of ball screw feed system and milling process with multi-excitation effect is proposed in this paper. In the integrated model, firstly an analytical model of motor harmonic torque with consideration of asymmetrical drive circuit and asymmetrical permanent magnet is given. Then, the numerical simulation procedure of cutter/workpiece engagement during milling process with displacement fluctuation induced by harmonic torque is put forward, which is followed by the solving flow for the proposed integrated model. Based on the integrated model, a new kind of quality defect shown as contour low frequency oscillation on machined surface is studied by experiments and simulations. The results demonstrate that the forming mechanism of the contour oscillation can be ascribed to the multi-excitation effect with motor harmonic torque and milling force. Moreover, the influence of different milling conditions on the contour oscillation characteristics, particularly on surface roughness, are further discussed. The results indicate that it is necessary to explain the cause of the new kind of quality defect with a view of system integration.

  10. Effects of the feeding system and breed on the growth performance, biometric features, and ruminal development of feedlot goat kids

    Directory of Open Access Journals (Sweden)

    Pedro Paulo Sobolow de Souza

    2016-08-01

    Full Text Available The objective of this experiment was to evaluate the effect of 2 feeding systems and 5 breeding groups on the growth performance, biometric features, and stomach morphology of feedlot goat kids. The experiment utilized gender as a randomized blocking factor in a 5 × 2 factorial scheme. The study goats were from the Alpine, Anglo-Nubian, 1/2 Boer x Alpine, 3/4 Boer x Alpine, and 7/8 Boer x Alpine breeds. Half of the goats were fed an experimental diet, whereas the other half were given the same diet supplemented with 1.5 L milk daily. The kids were slaughtered after they attained 30 kg body weight. The 1/2 Boer x Alpine goats showed superior growth performance because they exhibiting considerable heterosis. These animals are especially easy to use given that there is no need to maintain cross-bred females (½ Boer x Alpine e ¾ Boer x Alpine in the flock. Using milk in the feed the animals does not adversely affect growth performance or biometric features. Moreover, it helps to reduce the total weight of the stomach and leads to a 51.39% savings on feed. Dietary supplementation of milk in goat feed is recommended so long as there is excess milk available on the property.

  11. Dynamic Study of Feed-Effluent Heat Exchanger Addition on Double Bed Configuration Ammonia Reactor System within Varied Quenching Ratio

    Directory of Open Access Journals (Sweden)

    Adhi Tri Partono

    2018-01-01

    Full Text Available Ammonia is one of the most important industrial commodity due to its wide function. Ammonia synthesis reaction is an exotermic reaction. Therefore, Feed-Effluent Heat Exchanger (FEHE is added to increase thermal efficiency. However, FEHE could lead the process to experience hysteresis phenomenon due to interaction between equipments as one steady state T feed could result several T outlet. Hysteresis phenomenon may result asset losses like explosion, leakage, and loosing material integrity. Double bed reactor configuration allows us to use several operating parameters as variation to overcome hysteresis. In this review, quenching ratio was chosen to be that varied parameter. This study aims to determine how quenching ratio affects hysteresis zone by utilizing Aspen Hysys® V8.8 as simulation tool. Simulation showed that quenching ratio would narrow hysteresis zone yet increased extinction temperature that lower the conversion. Conversion profile showed that 0.2 quenching ratio got the highest conversion for system with bed volume ratio 2:1 while total volume was 30 m3. However, the feed temperature was fallen at hysteresis zone. Dynamic simulation showed that highest conversion feed temperature (10%ΔTf above extinct temperature was still able to preserve stability with descending temperature approach. Hysteresis itself started to occur at 1.7%ΔTf above extinct temperature

  12. Laser Spectroscopy of Neutron Rich Bismuth Isotopes

    CERN Multimedia

    2002-01-01

    %IS344 :\\\\ \\\\ The aim of the experiment is to measure the optical isotope shifts and hyperfine structures of bismuth isotopes across the N=126 shell closure in order to extract the change in mean square charge radii ($\\delta\\langle r^{2}\\rangle$) and static moments. These include the first isotones of lead to be measured directly above the shell closure and will provide new information on the systematics of the kink ($\\delta\\langle r^{2}\\rangle)$ seen in the lead isotopic chain. After two very successful runs the programme has been extended to include the neutron deficient isotopes below $^{201}$Bi to study the systematics across the $i_{13/2}$ neutron sub-shell closure at N=118.\\\\ \\\\ During the initial 2 runs (9 shifts) the isotope shifts and hyperfine structures of three new isotopes, $ ^{210,212,213}$Bi and the 9$^{-}$ isomer of $^{210}$Bi have been measured. The accuracy of the previous measurements of $^{205,206,208}$Bi have been greatly improved. The samples of $ ^{208,210,210^{m}}$Bi were prepared by c...

  13. Oxygen holes and hybridization in the bismuthates

    Science.gov (United States)

    Khazraie, Arash; Foyevtsova, Kateryna; Elfimov, Ilya; Sawatzky, George A.

    2018-02-01

    Motivated by the recently renewed interest in the superconducting bismuth perovskites, we investigate the electronic structure of the parent compounds A BiO3 (A = Sr, Ba) using ab initio methods and tight-binding (TB) modeling. We use the density functional theory (DFT) in the local density approximation (LDA) to understand the role of various interactions in shaping the A BiO3 band structure near the Fermi level. It is established that interatomic hybridization involving Bi-6 s and O-2 p orbitals plays the most important role. Based on our DFT calculations, we derive a minimal TB model and demonstrate that it can describe the properties of the band structure as a function of lattice distortions, such as the opening of a charge gap with the onset of the breathing distortion and the associated condensation of holes onto a1 g-symmetric molecular orbitals formed by the O-2 pσ orbitals on collapsed octahedra. We also derive a single band model involving the hopping of an extended molecular orbital involving both Bi-6 s and a linear combination of six O-2 p orbitals which provides a very good description of the dispersion and band gaps of the low energy scale bands straddling the chemical potential.

  14. Photoreductive generation of amorphous bismuth nanoparticles using polysaccharides--bismuth-cellulose nanocomposites.

    Science.gov (United States)

    Breitwieser, Doris; Kriechbaum, Margit; Ehmann, Heike M A; Monkowius, Uwe; Coseri, Sergiu; Sacarescu, Liviu; Spirk, Stefan

    2015-02-13

    A simple and highly reproducible synthesis of amorphous bismuth nanoparticles incorporated into a polysaccharide matrix using a photoreduction process is presented. As precursor for the generation of the Bi nanoparticles, organosoluble triphenylbismuth is used. The precursor is dissolved in toluene and mixed with a hydrophobic organosoluble polysaccharide, namely trimethylsilyl cellulose (TMSC) with high DSSi. The solution is subjected to UV exposure, which induces the homolytic cleavage of the bismuth-carbon bond in BiPh3 resulting in the formation of Bi(0) and phenyl radicals. The aggregation of the Bi atoms can be controlled in the TMSC matrix and yields nanoparticles of around 20 nm size as proven by TEM. The phenyl radicals undergo recombination to form small organic molecules like benzene and biphenyl, which can be removed from the nanocomposite after lyophilization and exposure to high vacuum. Finally, the TMSC matrix is converted to cellulose after exposure to HCl vapors, which remove the trimethylsilyl groups from the TMSC derivative. Although TMSC is converted to cellulose, the formed TMS-OH is not leaving the nanocomposite but reacts instead with surface oxide layer of the Bi nanoparticles to form silylated Bi nanoparticles as proven by TEM/EDX. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Improved proton CT imaging using a bismuth germanium oxide scintillator

    Science.gov (United States)

    Tanaka, Sodai; Nishio, Teiji; Tsuneda, Masato; Matsushita, Keiichiro; Kabuki, Shigeto; Uesaka, Mitsuru

    2018-02-01

    Range uncertainty is among the most formidable challenges associated with the treatment planning of proton therapy. Proton imaging, which includes proton radiography and proton computed tomography (pCT), is a useful verification tool. We have developed a pCT detection system that uses a thick bismuth germanium oxide (BGO) scintillator and a CCD camera. The current method is based on a previous detection system that used a plastic scintillator, and implements improved image processing techniques. In the new system, the scintillation light intensity is integrated along the proton beam path by the BGO scintillator, and acquired as a two-dimensional distribution with the CCD camera. The range of a penetrating proton is derived from the integrated light intensity using a light-to-range conversion table, and a pCT image can be reconstructed. The proton range in the BGO scintillator is shorter than in the plastic scintillator, so errors due to extended proton ranges can be reduced. To demonstrate the feasibility of the pCT system, an experiment was performed using a 70 MeV proton beam created by the AVF930 cyclotron at the National Institute of Radiological Sciences. The accuracy of the light-to-range conversion table, which is susceptible to errors due to its spatial dependence, was investigated, and the errors in the acquired pixel values were less than 0.5 mm. Images of various materials were acquired, and the pixel-value errors were within 3.1%, which represents an improvement over previous results. We also obtained a pCT image of an edible chicken piece, the first of its kind for a biological material, and internal structures approximately one millimeter in size were clearly observed. This pCT imaging system is fast and simple, and based on these findings, we anticipate that we can acquire 200 MeV pCT images using the BGO scintillator system.

  16. Feed-in of biogas into the natural gas distribution system. Legal topics, insurance topic and financial topics; Einspeisung von Biogas in das Erdgasnetz. Rechts-, Finanzierungs- und Versicherungsfragen

    Energy Technology Data Exchange (ETDEWEB)

    Degenhart, Heinrich; Hohlbein, Bernhard; Schomerus, Thomas (eds.)

    2012-11-01

    The book under consideration consists of the following contributions: (1) Legal topics, insurance topic and financial topics of the feed-in of biogas (I. Bleuel); (2) Feed-in of biogas in natural gas distribution systems - market and economic efficiency (J. Krassowski); (3) The Feed-in of biogas in the context of the environmental energy law (T. Mueller); (4) Regulation issues for the grid connection of biomass conversion plants (D. Konrad); (5) Design of contracts for the feed-in of biogas (H. von Bredow); (6) Liability insurance for biogas processing plants (K. Thiesen); (7) Procurement of equity capital (B. Drescher); (8) Opportunities and limits of external financing (A. Schuenemann).

  17. Trickle water and feeding system in plant culture and light-dark cycle effects on plant growth

    Science.gov (United States)

    Takano, T.; Inada, K.; Takanashi, J.

    Rockwool, as an inert medium covered or bagged with polyethylene film, can be effectively used for plant culture in space station. The most important machine is the pump adjusting the dripping rate in the feeding system. Hydro-aeroponics may be adaptable to a space laboratory. The shortening of the light-dark cycles inhibits plant growth and induces an abnormal morphogenesis. A photoperiod of 12-hr-dark may be needed for plant growth.

  18. Immunohistological localization of serotonin in the CNS and feeding system of the stable fly Stomoxys calcitrans L. (Diptera: Muscidae).

    Science.gov (United States)

    Liu, Samuel S; Li, Andrew Y; Witt, Colleen M; Pérez de León, Adalberto A

    2011-08-01

    Serotonin, or 5-hydroxytryptamine (5-HT), plays critical roles as a neurotransmitter and neuromodulator that control or modulate many behaviors in insects, such as feeding. Neurons immunoreactive (IR) to 5-HT were detected in the central nervous system (CNS) of the larval and adult stages of the stable fly, Stomoxys calcitrans, using an immunohistological technique. The location and pattern of the 5-HT IR neurons are described and compared for these two different developmental stages. Anatomical features of the fly feeding system were analyzed in third instar larvae and adult flies using a combination of histological and immunohistological techniques. In third instar larvae, the cibarial dilator muscles were observed within the cibarial pump skeleton and innervated by 5-HT IR neurons in nerves arising from the brain. There were four pairs of nerves arising from the frontal surface of the larval brain that innervate the cibarial pump muscles, pharynx, and muscles controlling the mouth hooks. A strong serotoninergic innervation of the anterior stomatogastric system was observed, which suggests 5-HT may play a role in the coordination of different phases of food ingestion by larvae. Similarly, many 5-HT IR neurons were found in both the brain and the thoracico-abdominal ganglia in the adult, some of which innervate the cibarial pump dilator muscles and the stomatogastric muscles. This is tnhe first report describing neuromuscular structures of the stable fly feeding system. The results reported here suggest 5-HT may play a critical role in feeding behaviors of stable fly larvae and adults. © 2011 Wiley-Liss, Inc.

  19. [Recycle of contaminated scrap metal]: Task 1.3.2, Bulk solids feed system. Topical report, October 1993-- January 1996

    International Nuclear Information System (INIS)

    1996-07-01

    A critical requirement in DOE's efforts to recycle, reuse, and dispose of materials from its decontamination and decommissioning activities is the design of a robust system to process a wide variety of bulk solid feeds. The capability to process bulk solids will increase the range of materials and broaden the application of Catalytic Extraction Processing (CEP). The term bulk solids refers to materials that are more economically fed into the top of a molten metal bath than by submerged injection through a tuyere. Molten Metal Technology, Inc. (MMT) has characterized CEP's ability to process bulk solid feed materials and has achieved significant growth in the size of bulk solid particles compatible with Catalytic Extraction Processing. Parametric experimental studies using various feed materials representative of the components of various DOE waste streams have validated design models which establish the reactor operating range as a function of feed material, mass flow rate, and particle size. MMT is investigating the use of a slurry system for bulk solid addition as it is the most efficient means for injecting soils, sludges, and similar physical forms into a catalytic processing unit. MMT is continuing to evaluate condensed phase product removal systems and alternative energy addition sources to enhance the operating efficiency of bulk solids CEP units. A condensed phase product removal system capable of on-demand product removal has been successfully demonstrated. MMT is also investigating the use of a plasma arc torch to provide supplemental heating during bulk solids processing. This comprehensive approach to bulk solids processing is expected to further improve overall process efficiency prior to the deployment of CEP for the recycle, reuse, and disposal of materials from DOE decontamination and decommissioning Activities

  20. Fish welfare in aquaponic systems: Its relation to water quality with an emphasis on feed and faeces-A review

    OpenAIRE

    Yildiz, Hijran Yavuzcan; Robaina, Lidia; Pirhonen, Juhani; Mente, Elena; Domínguez, David; Parisi, Giuliana

    2017-01-01

    Aquaponics is the combination of aquaculture (fish) and hydroponic cultivation of plants. This review examines fish welfare in relation to rearing water quality, fish feed and fish waste and faeces to develop a sustainable aquaponic system where the co-cultured organisms, fish, bacteria in biofilters and plants, should be considered holistically in all aquaponics operations. Water quality parameters are the primary environmental consideration for optimizing aquaponic production and for direct...

  1. Characterization of bismuth nanospheres deposited by plasma focus device

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, M., E-mail: cscientific2@aec.org.sy [IBA Laboratory, Chemistry Department, Atomic Energy Commission of Syria, P.O. Box 6091, Damascus (Syrian Arab Republic); Al-Hawat, Sh.; Akel, M. [Physics Department, Atomic Energy Commission of Syria, P.O. Box 6091, Damascus (Syrian Arab Republic); Mrad, O. [Chemistry Department, Atomic Energy Commission of Syria, P.O. Box 6091, Damascus (Syrian Arab Republic)

    2015-02-14

    A new method for producing thin layer of bismuth nanospheres based on the use of low energy plasma focus device is demonstrated. Various techniques such as scanning electron microscopy, Rutherford backscattering spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy have been used to characterize the morphology and the composition of the nanospheres. Experimental parameters may be adjusted to favour the formation of bismuth nanospheres instead of microspheres. Therefore, the formation of large surface of homogeneous layer of bismuth nanospheres with sizes of below 100 nm can be obtained. The natural snowball phenomenon is observed to be reproduced in nanoscale where spheres roll over the small nanospheres and grow up to bigger sizes that can reach micro dimensions. The comet-like structure, a reverse phenomenon to snowball is also observed.

  2. Inexpensive laser-induced surface modification in bismuth thin films

    Energy Technology Data Exchange (ETDEWEB)

    Contreras, A. Reyes [Facultad de Ciencias, Universidad Autónoma del Estado de México, Carretera Toluca, Ixtlahuaca Kilómetro 15.5, C.P. 50200 Edo. de México (Mexico); Hautefeuille, M., E-mail: mathieu_h@ciencias.unam.mx [Facultad de Ciencias, Universidad Nacional Autónoma de México, Avenida Universidad 3000, Circuito Exterior S/N, Coyoacán, Ciudad Universitaria, C.P. 04510 D.F. Mexico (Mexico); García, A. Esparza [Fotofísica y Películas Delgadas, Departamento de Tecnociencias, CCADET-UNAM, Circuito exterior s/n C.P. 04510 Cd. Universitaria, D.F. Mexico (Mexico); Mejia, O. Olea [Centro Conjunto de Investigación en Química Sustentable UAEM-UNAM, Carretera Toluca-Atlacomulco, Km 14.5, Unidad El Rosedal, 50200 San Cayetano, Estado de México (Mexico); López, M.A. Camacho [Facultad de Química, Universidad Autónoma del Estado de México, Tollocan s/n, esq. Paseo Colón, Toluca, Estado de México 50110 (Mexico)

    2015-05-01

    Highlights: • Laser-induced microbumps were formed on bismuth films using a simple, low-cost, laser setup. • The patterns, similar to those typically obtained with high-power lasers, were characterized. • Control of laser ablation conditions is critical in the fabrication of surface microbumps. - Abstract: In this work, we present results on texturing a 500 nm thick bismuth film, deposited by sputtering onto a glass slide using a low-cost homemade, near-infrared pulsed laser platform. A 785 nm laser diode of a CD–DVD pickup head was precisely focused on the sample mounted on a motorized two-axis translation stage to generate localized surface microbumps on the bismuth films. This simple method successfully transferred desired micropatterns on the films in a computer-numerical control fashion. Irradiated zones were characterized by atomic force microscopy and scanning electron microscopy. It was observed that final results are strongly dependent on irradiation parameters.

  3. Melting and solidification of bismuth inclusions in aluminium

    DEFF Research Database (Denmark)

    Thoft, N.B.; Bohr, J.; Buras, B.

    1995-01-01

    Supercooling of crystalline bismuth inclusions in aluminium crystals has been observed and studied with different techniques: x-ray diffraction, in situ Rutherford backscattering/channelling spectrometry and transmission electron microscopy. The results of the measurements with different experime......Supercooling of crystalline bismuth inclusions in aluminium crystals has been observed and studied with different techniques: x-ray diffraction, in situ Rutherford backscattering/channelling spectrometry and transmission electron microscopy. The results of the measurements with different...... experimental methods (and on different samples) agree remarkably well. The inclusions melt at temperatures at or below the bismuth bulk melting point, and the solid/liquid phase transition exhibits a hysteresis of 100-150 K. Average inclusion sizes ranged from a few nm to some tens of nm. The x-ray diffraction...

  4. Seedless Growth of Bismuth Nanowire Array via Vacuum Thermal Evaporation

    Science.gov (United States)

    Liu, Mingzhao; Nam, Chang-Yong; Zhang, Lihua

    2015-01-01

    Here a seedless and template-free technique is demonstrated to scalably grow bismuth nanowires, through thermal evaporation in high vacuum at RT. Conventionally reserved for the fabrication of metal thin films, thermal evaporation deposits bismuth into an array of vertical single crystalline nanowires over a flat thin film of vanadium held at RT, which is freshly deposited by magnetron sputtering or thermal evaporation. By controlling the temperature of the growth substrate the length and width of the nanowires can be tuned over a wide range. Responsible for this novel technique is a previously unknown nanowire growth mechanism that roots in the mild porosity of the vanadium thin film. Infiltrated into the vanadium pores, the bismuth domains (~ 1 nm) carry excessive surface energy that suppresses their melting point and continuously expels them out of the vanadium matrix to form nanowires. This discovery demonstrates the feasibility of scalable vapor phase synthesis of high purity nanomaterials without using any catalysts. PMID:26709727

  5. The effect of 1-week feed restriction on performance, digestibility of nutrients and digestive system development in the growing rabbit.

    Science.gov (United States)

    Tůmová, E; Volek, Z; Chodová, D; Härtlová, H; Makovický, P; Svobodová, J; Ebeid, T A; Uhlířová, L

    2016-01-01

    A 3 to 4 week feed restriction of about 20% to 25% of the free intake is widely applied in rabbit breeding systems to reduce post-weaning digestive disorders. However, a short intensive feed restriction is described in few studies and can be beneficial for growing rabbits due to a longer re-alimentation period. The aim of this study was to evaluate the effect of ad libitum (AL) and two restriction levels of feeding (50 and 65 g/rabbit per day) applied for 1 week on performance, gastrointestinal morphology and physiological parameters during the restriction and during the re-alimentation period. Rabbits were divided into three experimental groups: AL rabbits were fed AL, R1 rabbits were restricted from 42 to 49 days of age and received 50 g daily (29% of AL) and R2 rabbits were restricted at the same age and were fed 65 g of feed daily (37% of AL). In the 1(st) week after weaning and in the weeks after restriction, all the groups were fed AL. During the restriction period, daily weight gain (DWG) in R1 significantly dropped to 11% (experiment 1) and 5% (experiment 2) compared with rabbits in the AL group, although they were fed 29% of AL, whereas in the R2 group it decreased to 20% (experiment 1) and 10% (experiment 2). In the week following feed restriction, DWG in the restricted groups increased (PDigestibilities of CP and fat were not significantly higher during the restriction period and during the 1(st) week of re-alimentation compared with the AL group. Significant interactions between feeding regime and age revealed the shortest large intestine in the AL group at 49 days of age and the longest at 70 days in the AL and R1 groups. Small intestinal villi were significantly higher and the crypts were significantly deeper in the restricted groups. It could be concluded that short intensive feed restriction increased digestible area in the small and large intestines, including the height of villi and depth of crypts, which might be involved in the compensatory

  6. Feeding by emerald ash borer larvae induces systemic changes in black ash foliar chemistry

    Science.gov (United States)

    Yigen Chen; Justin G.A. Whitehill; Pierluigi Bonello; Therese M. Poland

    2011-01-01

    The exotic wood-boring pest, emerald ash borer (EAB), Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), has been threatening North American ash (Fraxinus spp.) resources, this being recognized since its first detection in Michigan, USA and Ontario, Canada in 2002. Ash trees are killed by larval feeding in the cambial region...

  7. The feeding ecology of Aphanius fasciatus (Valenciennes, 1821 in the lagoonal system of Messolongi (western Greece

    Directory of Open Access Journals (Sweden)

    Ioannis Leonardos

    2008-06-01

    Full Text Available The Mediterranean toothcarp Aphanius fasciatus (Valenciennes, 1821 is a small-sized omnivorous estuarine fish. Its diet is dominated by juveniles of shrimps (Palaemon adspersus, Isopods, Branchiopoda, Bivalvia, eggs of invertebrates, mosquitoes (adults and larvae and diatoms. An ontogenetic diet shift with an increase in mean prey size with fish length was observed. Smaller fish feed on planktonic prey (e.g. copepods, ostracods, nauplii of Artemia, while larger fish prefer larger and more benthic preys (e.g. ampipods, Bivalvia. The diet of A. fasciatus shows a high degree of seasonal variation, with a reduction in the feeding activity during the periods of adverse environmental conditions (winter and autumn. It is a well-adapted estuarine fish, its feeding mode and preferences depending on the preys that are available. Its feeding strategy is characterised by specialisation in different resource types (aquatic invertebrates and mosquitoes and a high between-phenotype contribution (BPC to niche width, with specialised individuals showing little or no overlap in resource use.

  8. 76 FR 78599 - National Pollutant Discharge Elimination System (NPDES) Concentrated Animal Feeding Operation...

    Science.gov (United States)

    2011-12-19

    ... 3334, 1301 Constitution Ave. NW., Washington, DC 20460. The Public Reading Room is open from 8:30 a.m... Reading Room is (202) 566-1744, and the telephone number for the Water Docket is (202) 566-2426. FOR...''). An animal feeding operation (AFO) is a CAFO if it meets the regulatory definition of a Large or...

  9. Bismuth onion thin film in situ grown on silicon wafer synthesized through a hydrothermal approach

    International Nuclear Information System (INIS)

    Zhao Yue; Liu Hong; Liu Jin; Hu Chenguo; Wang Jiyang

    2010-01-01

    Bismuth onion structured nanospheres with the same structure as carbon onions have been synthesized and observed. The nanospheres were synthesized through a hydrothermal method using bismuth hydroxide and silicon wafer as reactants. By controlling the heating temperature, heating time, and the pressure, nanoscale bismuth spheres can be in situ synthesized on silicon wafer, and forms a bismuth onion film on the substrate. The electronic property of the films was investigated. A formation mechanism of the formation of bismuth onions and the onion film has been proposed on the basis of experimental observations.

  10. Optical properties of bismuth-doped silica fibres in the temperature range 300 — 1500 K

    International Nuclear Information System (INIS)

    Dvoretskii, D A; Bufetov, Igor' A; Vel'miskin, V V; Zlenko, Alexander S; Khopin, V F; Semjonov, S L; Guryanov, Aleksei N; Denisov, L K; Dianov, Evgenii M

    2012-01-01

    The visible and near-IR absorption and luminescence bands of bismuth-doped silica and germanosilicate fibres have been measured for the first time as a function of temperature. The temperature-dependent IR luminescence lifetime of a bismuth-related active centre associated with silicon in the germanosilicate fibre has been determined. The Bi 3+ profile across the silica fibre preform is shown to differ markedly from the distribution of IR-emitting bismuth centres associated with silicon. The present results strongly suggest that the IR-emitting bismuth centre comprises a lowvalence bismuth ion and an oxygen-deficient glass network defect. (optical fibres, lasers and amplifiers. properties and applications)

  11. Oxygen concentration diffusion analysis of lead-bismuth-cooled, natural-circulation reactor

    International Nuclear Information System (INIS)

    Ito, Kei; Sakai, Takaaki

    2001-11-01

    The feasibility study on fast breeder reactors in Japan has been conducted at JNC and related organizations. The Phase-I study has finished in March, 2001. During the Phase-I activity, lead-bismuth eutectic coolant has been selected as one of the possible coolant options and a medium-scale plant, cooled by a lead-bismuth natural circulation flow was studied. On the other side, it is known that lead-bismuth eutectic has a problem of structural material corrosiveness. It was found that oxygen concentration control in the eutectic plays an important role on the corrosion protection. In this report, we have developed a concentration diffusion analysis code (COCOA: COncentration COntrol Analysis code) in order to carry out the oxygen concentration control analysis. This code solves a two-dimensional concentration diffusion equation by the finite differential method. It is possible to simulate reaction of oxygen and hydrogen by the code. We verified the basic performance of the code and carried out oxygen concentration diffusion analysis for the case of an oxygen increase by a refueling process in the natural circulation reactor. In addition, characteristics of the oxygen control system was discussed for a different type of the control system as well. It is concluded that the COCOA code can simulate diffusion of oxygen concentration in the reactor. By the analysis of a natural circulation medium-scale reactor, we make clear that the ON-OFF control and PID control can well control oxygen concentration by choosing an appropriate concentration measurement point. In addition, even when a trouble occurs in the oxygen emission or hydrogen emission system, it observes that control characteristic drops away. It is still possible, however, to control oxygen concentration in such case. (author)

  12. A cholinergic modulatory interneuron in the feeding system of the snail, Lymnaea.

    Science.gov (United States)

    Yeoman, M S; Parish, D C; Benjamin, P R

    1993-07-01

    1. Pharmacological and physiological methods were used to examine the role of acetylcholine (ACh) in modulation of the Lymnaea feeding central pattern generator (CPG) by the slow oscillator (SO) interneuron. 2. Extracts of dissected SO cell bodies inhibited spontaneous ventricular contractions of the clam Mya arenaria, indicating the presence of ACh. These effects were blocked by the specific antagonist benzoquinonium chloride (10(-7) M). 3. Isolated SO cells grown in culture synthesized ACh from tritiated choline. 4. High [K+] saline induced release of synthesized ACh from cultured SO cells into the medium. 5. The specific ACh antagonist phenyltrimethylammonium (10(-4) M) blocked both excitatory, biphasic (inhibitory-excitatory) and inhibitory monosynaptic connections from the SO to feeding CPG interneurons and motor neurons. Less specific cholinergic antagonists blocked either excitatory (hexamethonium, 10(-4) M) or both excitatory and inhibitory connections (d-tubo-curarine, 10(-4) M). 6. The synaptic responses of the SO could be mimicked by brief (20 ms) pressure-pulsed application of ACh onto the cell bodies of the postsynaptic cells in high-Mg2+ saline. In normal saline, ACh elicited bursts of spikes in the N1 cells, indicating that a fictive feeding pattern had been induced in the CPG. This mimics the main mechanism by which the SO activates the CPG, which is by exciting the N1s. 7. The frequency of SO-induced fictive feeding rhythm was reduced by bath application of hexamethonium chloride to the buccal ganglia. This reduced the amplitude of the SO-->N1 excitatory synaptic response (30% of controls) and is probably the main mechanism for the reduction in the frequency of the rhythm. 8. The evidence suggests that ACh is the main neurochemical involved in allowing the SO to initiate and control the frequency of the Lymnaea feeding CPG.

  13. The effect of the administration of three different antimicrobial premix formulations via the liquid feeding system on the occurrence of Enterobacteriaceae resistant to tetracycline in the liquid feed for pigs.

    Science.gov (United States)

    Heller, O; Sidler, X; Hässig, M; Thanner, S; Bee, G; Gutzwiller, A; Stephan, R

    2016-06-01

    The oral group treatment is still a common procedure in swine production. This project studied the effect of the application of 3 different formulations of antimicrobial premixes (1. chlortetracycline, 2. chlortetracycline + sulfadimidine + tylosin, 3. sulfadimidine + sulfathiazole + trimethoprim) via the liquid feeding system on the occurrence of tetracycline-resistant Enterobacteriaceae (Ent-Tetr) in the liquid feed. 156 and 112 feed samples were collected between April and December 2015 in 13 case and 14 control farms, respectively. The 27 farms were randomly selected pig fattening farms located in different parts of Switzerland. The number of feed samples that contained Ent-Tetr as well as the number of Enterobacteriaceae resistant to tetracycline per sample was significantly higher in the case group than in the control group. The use of any of the 3 antimicrobial combinations turned out to be the main risk factor for the occurrence of Ent-Tetr in the liquid feed. Our results suggest that liquid feed containing antimicrobials is a reservoir of antimicrobial resistant bacteria in swine production.

  14. Microscopic and voltammetric properties of lustrous bismuth deposits

    OpenAIRE

    Krolicka, Agnieszka; Bobrowski, Andrzej; Pamuła, Elżbieta

    2010-01-01

    A comparison of lustrous bismuth films, plated at glassy carbon, platinum and gold supports, is presented. The voltammetric performance of preplated bismuth film electrodes was tested using 50 μg/L In(III) and 50 μg/L Pb(II) solutions in 0.1 M acetic buffer in square wave and differential pulse modes. The influence of support material, plating solution concentration and storing conditions on the voltammetric response of BiFEs is discussed. The results of microscopic examination...

  15. Influence of bismuth loading in polystyrene-based plastic scintillators for low energy gamma spectroscopy

    International Nuclear Information System (INIS)

    Bertrand, G.H.V.; Sguerra, F.; Dehe-Pittance, C.; Carrel, F.; Coulon, R.; Normand, S.; Barat, E.; Dautremer, T.; Montagu, T.; Hamel, M.

    2014-01-01

    This article presents the synthesis and the blend of bismuth complexes in polystyrene based plastic scintillators. A specific design has enabled the fabrication of a scintillator loaded with up to 17 wt% of bismuth. Tri-carboxylate and tri-aryl bismuth compounds were used to explore and understand the influence of bismuth loading on the two main criteria of plastic scintillation: light yield and detection efficiency of γ-rays. For gamma radiation with an energy ≤200 keV, bismuth loaded scintillators demonstrate the ability to produce a photoelectric peak (total absorption peak) in pulse height spectra. The increase of interactions due to bismuth doping was quantified and fitted with standard models. Finally the performance of our bismuth loaded scintillators was evaluated to be better than that of a commercial lead loaded counterpart. (authors)

  16. Optimization of Antenna Current Feeding for the Alfvén Eigenmodes Active Diagnostic System of JET

    Science.gov (United States)

    Albarracin Manrique, Marcos A.; Ruchko, L.; Pires, C. J. A.; Galvão, R. M. O.; Elfimov, A. G.

    2018-04-01

    The possibility of exploring proper phasing of the feeding currents in the existing antenna of the Alfvén Eigenmodes Active Diagnostic system of JET, to excite pure toroidal spectra of Toroidal Alfvén Eigenmodes, is numerically investigated. Special attention is given to the actual perturbed fields excited in the plasma, which are calculated self-consistently using the antenna version of the CASTOR code. It is found that due to the close spacing of the JET antenna modules and quasi degeneracy of modes with medium to high values of the toroidal mode number n, although a proper choice of the phasing of the feeding currents of the antenna modules indeed leads to an increase of the perturbed fields of the selected mode, modes with nearby values of n are also excited with large amplitudes, so that a scheme to proper select the detected modes remains necessary. A scheme using different antenna position distribution is proposed to achieve successful optimization.

  17. Bismuth centred magnetic perovskite: A projected multiferroic

    International Nuclear Information System (INIS)

    Kundu, Asish K.; Seikh, Md. Motin; Nautiyal, Pranjal

    2015-01-01

    In recent time substantial attention has been initiated to understand the physics behind multiferroism and to design new multiferroic materials. BiMnO 3 and BiFeO 3 are the well-studied Bi-centred multiferroic oxides. BiMnO 3 is a ferromagnetic–ferroelectric (metastable) phase and require drastic conditions to synthesize. However, lanthanum substituted BiMnO 3 phases stabilized at ambient pressure. It is thus of major importance to increase the number of ferromagnetic perovskites with Bi cations that could be designed under ambient conditions. In this article, we have presented an up to date report of investigations on Bi-centred magnetic perovskites, a prospective material for multiferroic application. Central focus is concentrated on La 0.5 Bi 0.5 MnO 3 perovskite with various substitutions at different levels. A few of these perovskites are found to be of practical importance e.g. La 0.5 Bi 0.5 Mn 0.67 Co 0.33 O 3 with high dielectric permittivity coupled with ferromagnetism. A comprehensive analysis of different physical functionalities and their interrelation for a wide range of compositions of these Bi-centred perovskites is presented. It has been found that the complex magnetic behaviour originates from mixed valence metal ions. The ferroelectricity is associated with the 6s 2 lone pair of Bi 3+ cations. The magnetic ground state influences the dielectric properties reflecting the multiferroism in a single material. - Highlights: • Multiferroics have attracted increasing attention due to their possible device applications. • Bismuth centred magnetic perovskite is one kind of such promising multiferroic materials. • Ferromagnetic Bi-perovskites, which are synthesized at ambient conditions, have been discussed

  18. Local feeding strategies and milk composition in small-scale dairy production systems during the rainy season in the highlands of Mexico.

    Science.gov (United States)

    Alfonso-Ávila, Ángel René; Wattiaux, Michel A; Espinoza-Ortega, Angélica; Sánchez-Vera, Ernesto; Arriaga-Jordán, Carlos M

    2012-03-01

    The objective of the work was to identify local feeding strategies in small-scale dairy production systems during the rainy season in the highlands of Mexico, and to determine their effects on milk yields (MY), milk composition and economic viability. Twenty-two dairy farms were monitored by monthly visits, recording and sampling milk from between two and six cows in each farm, live-weight was also recorded. Samples from feeds used in that month were taken and feeds given to the dairy herd were weighed. Economic data was also recorded. Milk composition and milk urea nitrogen were determined, as well as chemical composition of feeds. Eighteen feedstuffs were identified, grouped in: HNH feeds-high in neutral detergent fibre (NDF) and in DM matter; HNL feeds-high in NDF but low in DM; HCh feeds-high in non-fibrous carbohydrates; and HCP feeds-high in crude protein. Four feeding strategies were identified: strategy 1 uses HND, HNL and HCP; strategy 2-HND, HNL, HCh and HCP; strategy 3 HNH and HCP; and strategy 4 HNL and HCP. Of participating farms, 73.4% followed strategy 1, 11.3% strategy 2, 11.3% strategy 4 and 3.8% strategy 3. There were no statistical differences (P > 0.05) between strategies for MY and milk composition, but there were differences (P  0.05) model relating intake of feed groups and milk fat content, but milk protein and SNF contents were significantly explained by intake of HCP. When expressed as MY and milk components yield, milk fat yield was significantly explained by intake of all four feed groups, but milk protein and SNF yields were explained only by intake of HCP and LW. MUN excretion was explained also by HCP intake. All feeding strategies produced positive economic returns, on average generating the equivalent of 3.45 minimum wages of the area.

  19. Reliability study of the auxiliary feed-water system of a pressurized water reactor by faults tree and Bayesian Network

    Energy Technology Data Exchange (ETDEWEB)

    Lava, Deise Diana; Borges, Diogo da Silva; Guimarães, Antonio Cesar Ferreira; Moreira, Maria de Lourdes, E-mail: deise_dy@hotmail.com, E-mail: diogosb@outlook.com, E-mail: tony@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    This paper aims to present a study of the reliability of the Auxiliary Feed-water System (AFWS) through the methods of Fault Tree and Bayesian Network. Therefore, the paper consists of a literature review of the history of nuclear energy and the methodologies used. The AFWS is responsible for providing water system to cool the secondary circuit of nuclear reactors of the PWR type when normal feeding water system failure. How this system operates only when the primary system fails, it is expected that the AFWS failure probability is very low. The AFWS failure probability is divided into two cases: the first is the probability of failure in the first eight hours of operation and the second is the probability of failure after eight hours of operation, considering that the system has not failed within the first eight hours. The calculation of the probability of failure of the second case was made through the use of Fault Tree and Bayesian Network, that it was constructed from the Fault Tree. The results of the failure probability obtained were very close, on the order of 10{sup -3}. (author)

  20. Temperature gradient compatibility tests of some refractory metals and alloys in bismuth and bismuth--lithium solutions

    International Nuclear Information System (INIS)

    DiStefano, J.R.; Cavin, O.B.

    1976-11-01

    Quartz, T-111, and Mo thermal-convection loop tests were conducted at temperatures up to 700 0 C (100 0 C ΔT) to determine the compatibility of several refractory metals/alloys with bismuth and bismuth-lithium solutions for molten salt breeder reactor applications. Methods of evaluation included weight change measurements, metallographic examination, chemical and electron microprobe analysis, and mechanical properties tests. Molybdenum, T-111, and TA--10 percent W appear to be the most promising containment materials, while niobium and iron-based alloys are unacceptable

  1. Extraction of gold and mercury from sea water with bismuth diethyldithiocarbamate prior to neutron activation-. gamma. -spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Yu, J.C.; Lo, J.M.; Wai, C.M. (Idaho Univ. Moscow (USA). Dept. of Chemistry)

    1983-11-01

    Gold and mercury in sea water can be selectively extracted by bismuth diethyldithiocarbamate into chloroform at pH <= 1. The matrix species and many other trace elements in the system are effectively removed during extraction. When neutron activation-..gamma..-spectrometry is used, the detection limits for gold and mercury are 0.001 and 0.01 ..mu..g l/sup -1/, respectively. The relative precision is 9% for gold and 13% for mercury.

  2. A chemical exchange system for isotopic feed to a nitrogen and oxygen isotope separation plant

    International Nuclear Information System (INIS)

    Mills, T.R.; Garcia, M.G.; Vandervoort, R.C.; McInteer, B.B.

    1989-01-01

    A process has been developed to provide isotopic feed to a nitric oxide isotope distillation plant. Central to the process is the isotopic chemical exchange of NO and nitric acid in countercurrent flows in a 3-in. diameter packed column. An isotopically depleted stream of NO is reenriched to natural isotopic abundances by the exchange and is recycled as feed back to the distillation columns. Makeup NO is generated in another column from sulfur dioxide and nitric acid. Multistage gas purifiers reduce condensible impurities in the nitric oxide below 10 ppm. The process operates unattended at flow rates of 0.5 to 2 mol/min. The new NO recycle-enrichment and generation processes have successfully provided the feedstock for the NO isotope separation columns for over 6 years. 19 refs., 2 figs

  3. Humpback whale "super-groups" - A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae in the Benguela Upwelling System.

    Directory of Open Access Journals (Sweden)

    Ken P Findlay

    Full Text Available Southern Hemisphere humpback whales (Megaptera novaeangliae generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens, hyperiid amphipods (Themisto gaudichaudii, mantis shrimp (Pterygosquilla armata capensis and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015 identified large tightly-spaced groups (20 to 200 individuals of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent "fishy" smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude

  4. Humpback whale "super-groups" - A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae) in the Benguela Upwelling System.

    Science.gov (United States)

    Findlay, Ken P; Seakamela, S Mduduzi; Meÿer, Michael A; Kirkman, Stephen P; Barendse, Jaco; Cade, David E; Hurwitz, David; Kennedy, Amy S; Kotze, Pieter G H; McCue, Steven A; Thornton, Meredith; Vargas-Fonseca, O Alejandra; Wilke, Christopher G

    2017-01-01

    Southern Hemisphere humpback whales (Megaptera novaeangliae) generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba) has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens), hyperiid amphipods (Themisto gaudichaudii), mantis shrimp (Pterygosquilla armata capensis) and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015) identified large tightly-spaced groups (20 to 200 individuals) of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent "fishy" smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun) and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude feeding events

  5. Humpback whale “super-groups” – A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae) in the Benguela Upwelling System

    Science.gov (United States)

    Seakamela, S. Mduduzi; Meÿer, Michael A.; Kirkman, Stephen P.; Barendse, Jaco; Cade, David E.; Hurwitz, David; Kennedy, Amy S.; Kotze, Pieter G. H.; McCue, Steven A.; Thornton, Meredith; Vargas-Fonseca, O. Alejandra; Wilke, Christopher G.

    2017-01-01

    Southern Hemisphere humpback whales (Megaptera novaeangliae) generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba) has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens), hyperiid amphipods (Themisto gaudichaudii), mantis shrimp (Pterygosquilla armata capensis) and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015) identified large tightly-spaced groups (20 to 200 individuals) of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent “fishy” smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun) and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude feeding

  6. Handbook on Lead-bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-hydraulics and Technologies - 2015 Edition

    International Nuclear Information System (INIS)

    Fazio, Concetta; Sobolev, V.P.; Aerts, A.; Gavrilov, S.; Lambrinou, K.; Schuurmans, P.; Gessi, A.; Agostini, P.; Ciampichetti, A.; Martinelli, L.; Gosse, S.; Balbaud-Celerier, F.; Courouau, J.L.; Terlain, A.; Li, N.; Glasbrenner, H.; Neuhausen, J.; Heinitz, S.; Zanini, L.; Dai, Y.; Jolkkonen, M.; Kurata, Y.; Obara, T.; Thiolliere, N.; Martin-Munoz, F.J.; Heinzel, A.; Weisenburger, A.; Mueller, G.; Schumacher, G.; Jianu, A.; Pacio, J.; Marocco, L.; Stieglitz, R.; Wetzel, T.; Daubner, M.; Litfin, K.; Vogt, J.B.; Proriol-Serre, I.; Gorse, D.; Eckert, S.; Stefani, F.; Buchenau, D.; Wondrak, T.; Hwang, I.S.

    2015-01-01

    Heavy liquid metals such as lead or lead-bismuth have been proposed and investigated as coolants for fast reactors since the 1950's. More recently, there has been renewed interest worldwide in the use of these materials to support the development of systems for the transmutation of radioactive waste. Heavy liquid metals are also under evaluation as a reactor core coolant and accelerator-driven system neutron spallation source. Several national and international R and D programmes are ongoing for the development of liquid lead-alloy technology and the design of liquid lead-alloy-cooled reactor systems. In 2007, a first edition of the handbook was published to provide deeper insight into the properties and experimental results in relation to lead and lead-bismuth eutectic technology and to establish a common database. This handbook remains a reference in the field and is a valuable tool for designers and researchers with an interest in heavy liquid metals. The 2015 edition includes updated data resulting from various national and international R and D programmes and contains new experimental data to help understand some important phenomena such as liquid metal embrittlement and turbulent heat transfer in a fuel bundle. The handbook provides an overview of liquid lead and lead-bismuth eutectic properties, materials compatibility and testing issues, key aspects of thermal-hydraulics and existing facilities, as well as perspectives for future R and D. (authors)

  7. Comparative assessment of thermophysical and thermohydraulic characteristics of lead, lead-bismuth and sodium coolants for fast reactors

    International Nuclear Information System (INIS)

    2002-06-01

    All prototype, demonstration and commercial liquid metal cooled fast reactors (LMFRs) have used liquid sodium as a coolant. Sodium cooled systems, operating at low pressure, are characterised by very large thermal margins relative to the coolant boiling temperature and a very low structural material corrosion rate. In spite of the negligible thermal energy stored in the liquid sodium available for release in case of leakage, there is some safety concern because of its chemical reactivity with respect to air and water. Lead, lead-bismuth or other alloys of lead, appear to eliminate these concerns because the chemical reactivity of these coolants with respect to air and water is very low. Some experts believe that conceptually, these systems could be attractive if high corrosion activity inherent in lead, long term materials compatibility and other problems will be resolved. Extensive research and development work is required to meet this goal. Preliminary studies on lead-bismuth and lead cooled reactors and ADS (accelerator driven systems) have been initiated in France, Japan, the United States of America, Italy, and other countries. Considerable experience has been gained in the Russian Federation in the course of development and operation of reactors cooled with lead-bismuth eutectic, in particular, propulsion reactors. Studies on lead cooled fast reactors are also under way in this country. The need to exchange information on alternative fast reactor coolants was a major consideration in the recommendation by the Technical Working Group on Fast Reactors (TWGFRs) to collect, review and document the information on lead and lead-bismuth alloy coolants: technology, thermohydraulics, physical and chemical properties, as well as to make an assessment and comparison with respective sodium characteristics

  8. Field Testing of a Pneumatic Regolith Feed System During a 2010 ISRU Field Campaign on Mauna Kea, Hawaii

    Science.gov (United States)

    Craft, Jack; Zacny, Kris; Chu, Philip; Wilson, Jack; Santoro, Chris; Carlson, Lee; Maksymuk, Michael; Townsend, Ivan I.; Mueller, Robert P.; Mantovani, James G.

    2010-01-01

    Lunar In Situ Resource Utilization (ISRU) consists of a number of tasks starting with mining of lunar regolith, followed by the transfer of regolith to an oxygen extraction reactor and finally processing the regolith and storing of extracted oxygen. The transfer of regolith from the regolith hopper at the ground level to an oxygen extraction reactor many feet above the surface could be accomplished in different ways, including using a mechanical auger, bucket ladder system or a pneumatic system. The latter system is commonly used on earth when moving granular materials since it offers high reliability and simplicity of operation. In this paper, we describe a pneumatic regolith feed system, delivering feedstock to a Carbothermal reactor and lessons learned from deploying the system during the 2010 ISRU field campaign on the Mauna Kea, Hawaii.

  9. Phase transition of bismuth telluride thin films grown by MBE

    DEFF Research Database (Denmark)

    Fülöp, Attila; Song, Yuxin; Charpentier, Sophie

    2014-01-01

    A previously unreported phase transition between Bi2Te3 and Bi4Te3 in bismuth telluride grown by molecular beam epitaxy is recorded via XRD, AFM, and SIMS observations. This transition is found to be related to the Te/Bi beam equivalent pressure (BEP) ratio. BEP ratios below 17 favor the formation...

  10. Ultrafast electron diffraction studies of optically excited thin bismuth films

    International Nuclear Information System (INIS)

    Rajkovic, Ivan

    2008-01-01

    This thesis contains work on the design and the realization of an experimental setup capable of providing sub-picosecond electron pulses for ultrafast electron diffraction experiments, and performing the study of ultrafast dynamics in bismuth after optical excitation using this setup. (orig.)

  11. Melting behaviour of lead and bismuth nano-particles in ...

    Indian Academy of Sciences (India)

    Melting behaviour of nanocrystalline interfaces, created by embedding lead and bismuth nanoparticles in quasicrystalline matrices, was studied. Sharply faceted and coherent interfaces can be related to sharper melting transitions, while irregularly shaped and incoherent interfaces can be directly correlated with lowering of ...

  12. A study on structural stability of bismuth titanate with lanthanum ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 3. A study on structural stability of bismuth titanate with lanthanum ... In addition, the enlarged region of Bi 4f, Bi 4d, Ti 2p, La 3d and O 1s of doping sample was clearly seen after deconvolution. Based on binding energy position, it can be unambiguously stated ...

  13. Tailoring the Bandgap and magnetic properties by Bismuth ...

    Indian Academy of Sciences (India)

    66

    refined with the single phase orthorhombic Pnma symmetry along with minor amount (< 2%) of Bi2O3. (nonmagnetic) impurity .The observations suggests that the solubility of Bismuth (Bi) in Nd site is lower than 15 at. % through our sol-gel processing technique. Single phase of NBiCO and the minimal change of lattice ...

  14. Crystal structure and ionic conductivity of a new bismuth tungstate,

    Indian Academy of Sciences (India)

    Unknown

    43. Dedicated to Prof J Gopalakrishnan on his 62nd birthday. *For correspondence. Crystal structure and ionic conductivity of a new bismuth tungstate,. Bi3W2O10⋅5. B MUKTHA and T N GURU ROW*. Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore 560 012 e-mail: ssctng@sscu.iisc.ernet.in.

  15. Poisoning effect of bismuth on modification behaviour of strontium in ...

    Indian Academy of Sciences (India)

    also be added to aluminum–magnesium alloys to counteract. ∗. Author for correspondence (saeedfarahany@gmail.com, fsaeed2@live.utm.my) the detrimental effect of sodium on hot cracking (Talbot and. Ransley 1997). Pillai and Anantharaman (1968) reported that bismuth could play a role as silicon modifier whereas ...

  16. Ultrafast electron diffraction studies of optically excited thin bismuth films

    Energy Technology Data Exchange (ETDEWEB)

    Rajkovic, Ivan

    2008-10-21

    This thesis contains work on the design and the realization of an experimental setup capable of providing sub-picosecond electron pulses for ultrafast electron diffraction experiments, and performing the study of ultrafast dynamics in bismuth after optical excitation using this setup. (orig.)

  17. Oxygen surface exchange kinetics of erbia-stabilized bismuth oxide

    NARCIS (Netherlands)

    Yoo, C.-Y.; Boukamp, Bernard A.; Bouwmeester, Henricus J.M.

    2011-01-01

    The surface oxygen exchange kinetics of bismuth oxide stabilized with 25 mol% erbia (BE25) has been studied in the temperature and pO2 ranges 773–1,023 K and 0.1– 0.95 atm, respectively, using pulse-response 18O–16O isotope exchange measurements. The results indicate that BE25 exhibits a

  18. Formic Acid Oxidation at Platinum-Bismuth Clusters

    DEFF Research Database (Denmark)

    Lovic, J. D.; Stevanovic, S. I.; Tripkovic, D. V.

    2014-01-01

    Formic acid oxidation was studied on platinum-bismuth deposits on glassy carbon (GC) substrate. The catalysts of equimolar ratio were prepared by potentiostatic deposition using chronocoulometry. Bimetallic structures obtained by two-step process, comprising deposition of Bi followed by deposition...

  19. Colloidal bismuth subcitrate in peptic ulcer--a review

    NARCIS (Netherlands)

    Tytgat, G. N.

    1987-01-01

    De-Nol (colloidal bismuth subcitrate, CBS) precipitates in an acid environment and adheres to the exudate layer covering an ulcer crater; moreover, CBS blocks pepsin activity, retards hydrogen-ion back-diffusion and stimulates prostaglandin synthesis. The average healing rate in duodenal ulcer (DU)

  20. Ultrafast electronic dynamics in laser-excited crystalline bismuth

    Directory of Open Access Journals (Sweden)

    Chekalin S.

    2013-03-01

    Full Text Available Femtosecond spectroscopy was applied to capture complex dynamics of non equilibrium electrons in bismuth. Data analysis reveals significant wavevector dependence of electron-hole and electron-phonon coupling strength along the Γ-T direction of the Brillouin zone

  1. Bismuth Ferrite for Active Control of Surface Plasmon Polariton Modes

    DEFF Research Database (Denmark)

    Babicheva, Viktoriia; Zhukovsky, Sergei; Lavrinenko, Andrei

    2014-01-01

    We propose and investigate several layouts of m etal-insulator-metal waveguide with active core which can be utilized for dynamic switching in photonic integrated circuits. The active material, bismuth ferrite (BiFeO3), is sandwiched between metal plates and changes i ts refractive index through...

  2. Sesbania sesban as a fodder tree in Ethiopian livestock farming systems: Feeding practices and farmers' perception of feeding effects on sheep performance

    NARCIS (Netherlands)

    Oosting, S.J.; Mekoya, A.; Fernandez-Rivera, S.; Zijpp, van der A.J.

    2011-01-01

    Sesbania sesban is one of the exotic multipurpose fodder trees introduced in the Ethiopian highlands for livestock feed and soil conservation. Several on-station studies showed that supplementation with Sesbania improved intake and digestibility of basal diet and growth rate of animals. However,

  3. Feeding Intolerance in Children with Severe Impairment of the Central Nervous System: Strategies for Treatment and Prevention.

    Science.gov (United States)

    Hauer, Julie

    2017-12-22

    Children with severe impairment of the central nervous system (CNS) experience gastrointestinal (GI) symptoms at a high rate and severity, including retching, vomiting, GI tract pain, and feeding intolerance. Commonly recognized sources of symptoms include constipation and gastroesophageal reflux disease. There is growing awareness of sources due to the impaired nervous system, including visceral hyperalgesia due to sensitization of sensory neurons in the enteric nervous system and central neuropathic pain due to alterations in the thalamus. Challenging the management of these symptoms is the lack of tests to confirm alterations in the nervous system as a cause of symptom generation, requiring empirical trials directed at such sources. It is also common to have multiple reasons for the observed symptoms, further challenging management. Recurrent emesis and GI tract pain can often be improved, though in some not completely eliminated. In some, this can progress to intractable feeding intolerance. This comprehensive review provides an evidence-based approach to care, a framework for recurrent symptoms, and language strategies when symptoms remain intractable to available interventions. This summary is intended to balance optimal management with a sensitive palliative care approach to persistent GI symptoms in children with severe impairment of the CNS.

  4. Handbook of reflector antennas and feed systems v.1 theory and design of reflectors

    CERN Document Server

    Sharma, Satish K; Shafai, Lotfollah

    2013-01-01

    This is the first truly comprehensive and most up-to-date handbook available on modern reflector antennas and feed sources for diversified space and ground applications. There has never been such an all-encompassing reflector handbook in print, and no currently available title offers coverage of such recent research developments. The Handbook consists of three volumes. Volume I provides a unique combination of theoretical underpinnings with design considerations and techniques. The need for knowledge in reflector antennas has grown steadily over the last two decades due to increased use in spa

  5. Handbook of reflector antennas and feed systems v.3 applications of reflectors

    CERN Document Server

    Rao, Sudhakar; Sharma, Satish K

    2013-01-01

    This is the first truly comprehensive and most up-to-date handbook available on modern reflector antennas and feed sources for diversified space and ground applications. There has never been such an all-encompassing reflector handbook in print, and no currently available title offers coverage of such recent research developments. The Handbook consists of three volumes. Volume III focuses on the range of reflector antenna applications, including space, terrestrial, and radar. The intent of this book volume is to provide practical applications and design information on reflector antennas used fo

  6. Quantification of the main digestive processes in ruminants: the equations involved in the renewed energy and protein feed evaluation systems.

    Science.gov (United States)

    Sauvant, D; Nozière, P

    2016-05-01

    The evolution of feeding systems for ruminants towards evaluation of diets in terms of multiple responses requires the updating of the calculation of nutrient supply to the animals to make it more accurate on aggregated units (feed unit, or UF, for energy and protein digestible in the intestine, or PDI, for metabolizable protein) and to allow prediction of absorbed nutrients. The present update of the French system is based on the building and interpretation through meta-analysis of large databases on digestion and nutrition of ruminants. Equations involved in the calculation of UF and PDI have been updated, allowing: (1) prediction of the out flow rate of particles and liquid depending on the level of intake and the proportion of concentrate, and the use of this in the calculation of ruminal digestion of protein and starch from in situ data; (2) the system to take into account the effects of the main factors of digestive interactions (level of intake, proportion of concentrate, rumen protein balance) on organic matter digestibility, energy losses in methane and in urine; (3) more accurate calculation of the energy available in the rumen and the efficiency of its use for the microbial protein synthesis. In this renewed model UF and PDI values of feedstuffs vary depending on diet composition, and intake level. Consequently, standard feed table values can be considered as being only indicative. It is thus possible to predict the nutrient supply on a wider range of diets more accurately and in particular to better integrate energy×protein interactions occurring in the gut.

  7. Microwave-hydrothermal synthesis of perovskite bismuth ferrite nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Biasotto, G. [Laboratorio Interdisciplinar em Ceramica (LIEC), Departamento de Fisico-Quimica, Instituto de Quimica, UNESP, CEP 14800-900, Araraquara, SP (Brazil); Simoes, A.Z., E-mail: alezipo@yahoo.com [Universidade Estadual Paulista-Unesp, Faculdade de Engenharia de Guaratingueta, Av. Dr. Ariberto Pereira da Cunha, 333, Bairro Pedregulho, CEP 12516-410, Guaratingueta, SP (Brazil); Foschini, C.R.; Zaghete, M.A.; Varela, J.A.; Longo, E. [Laboratorio Interdisciplinar em Ceramica (LIEC), Departamento de Fisico-Quimica, Instituto de Quimica, UNESP, CEP 14800-900, Araraquara, SP (Brazil)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer BiFeO{sub 3} (BFO) nanoparticles were grown by hydrothermal microwave method (HTMW). Black-Right-Pointing-Pointer The soaking time is effective in improving phase formation. Black-Right-Pointing-Pointer Rietveld refinement reveals an orthorhombic structure. Black-Right-Pointing-Pointer The observed magnetism of the BFO crystallites is a consequence of particle size. Black-Right-Pointing-Pointer The HTMW is a genuine technique for low temperatures and short times of synthesis. -- Abstract: Hydrothermal microwave method (HTMW) was used to synthesize crystalline bismuth ferrite (BiFeO{sub 3}) nanoparticles (BFO) in the temperature of 180 Degree-Sign C with times ranging from 5 min to 1 h. BFO nanoparticles were characterized by means of X-ray analyses, FT-IR, Raman spectroscopy, TG-DTA and FE-SEM. X-ray diffraction results indicated that longer soaking time was benefit to refraining the formation of any impurity phases and growing BFO crystallites into almost single-phase perovskites. Typical FT-IR spectra for BFO nanoparticles presented well defined bands, indicating a substantial short-range order in the system. TG-DTA analyses confirmed the presence of lattice OH{sup -} groups, commonly found in materials obtained by HTMW process. Compared with the conventional solid-state reaction process, submicron BFO crystallites with better homogeneity could be produced at the temperature as low as 180 Degree-Sign C. These results show that the HTMW synthesis route is rapid, cost effective, and could be used as an alternative to obtain BFO nanoparticles in the temperature of 180 Degree-Sign C for 1 h.

  8. Impact of including growth, carcass and feed efficiency traits in the breeding goal for combined milk and beef production systems.

    Science.gov (United States)

    Hietala, P; Juga, J

    2017-04-01

    Improving feed efficiency in dairy cattle could result in more profitable and environmentally sustainable dairy production through lowering feed costs and emissions from dairy farming. In addition, beef production based on dairy herds generates fewer greenhouse gas emissions per unit of meat output than beef production from suckler cow systems. Different scenarios were used to assess the profitability of adding traits, excluded from the current selection index for Finnish Ayrshire, to the breeding goal for combined dairy and beef production systems. The additional breeding goal traits were growth traits (average daily gain of animals in the fattening and rearing periods), carcass traits (fat covering, fleshiness and dressing percentage), mature live weight (LW) of cows and residual feed intake (RFI) traits. A breeding scheme was modeled for Finnish Ayrshire under the current market situation in Finland using the deterministic simulation software ZPLAN+. With the economic values derived for the current production system, the inclusion of growth and carcass traits, while preventing LW increase generated the highest improvement in the discounted profit of the breeding program (3.7%), followed by the scenario where all additional traits were included simultaneously (5.1%). The use of a selection index that included growth and carcass traits excluding LW, increased the profit (0.8%), but reduced the benefits resulted from breeding for beef traits together with LW. A moderate decrease in the profit of the breeding program was obtained when adding only LW to the breeding goal (-3.1%), whereas, adding only RFI traits to the breeding goal resulted in a minor increase in the profit (1.4%). Including beef traits with LW in the breeding goal showed to be the most potential option to improve the profitability of the combined dairy and beef production systems and would also enable a higher rate of self-sufficiency in beef. When considering feed efficiency related traits, the

  9. Effects of the feeding system and breed on the growth performance, biometric features, and ruminal development of feedlot goat kids

    OpenAIRE

    Pedro Paulo Sobolow de Souza; Helen Fernanda Barros Gomes; Raquel Ornelas Marques; Heraldo Cesar Gonçalves; Gil Inacio Lara Canizares; Paulo Roberto de Lima Meirelles; Giuliana Micai de Oliveira; Evelyn Prestes Brito; Natalia Santos Leal; Angelo Polizel Neto

    2016-01-01

    The objective of this experiment was to evaluate the effect of 2 feeding systems and 5 breeding groups on the growth performance, biometric features, and stomach morphology of feedlot goat kids. The experiment utilized gender as a randomized blocking factor in a 5 × 2 factorial scheme. The study goats were from the Alpine, Anglo-Nubian, 1/2 Boer x Alpine, 3/4 Boer x Alpine, and 7/8 Boer x Alpine breeds. Half of the goats were fed an experimental diet, whereas the other half were given the sam...

  10. Feed safety in the feed supply chain

    Directory of Open Access Journals (Sweden)

    Pinotti, L.

    2011-01-01

    Full Text Available A number of issues have weakened the public's confidence in the quality and wholesomeness of foods of animal origin. As a result farmers, nutritionists, industry and governments have been forced to pay serious attention to animal feedstuff production processes, thereby acknowledging that animal feed safety is an essential prerequisite for human food safety. Concerns about these issues have produced a number of important effects including the ban on the use of processed animal proteins, the ban on the addition of most antimicrobials to farm animals diets for growth‐promotion purposes, and the implementation of feed contaminant regulations in the EU. In this context it is essential to integrate knowledge on feed safety and feed supply. Consequently, purchase of new and more economic sources of energy and protein in animal diets, which is expected to conform to adequate quality, traceability, environmental sustainability and safety standards, is an emerging issue in livestock production system.

  11. Metallothionein bioconjugates as delivery vehicles for bismuth-212 alpha particle therapy

    International Nuclear Information System (INIS)

    Macklis, R.M.; Morris, C.; Humm, J.; Hines, J.; Atcher, R.

    1991-01-01

    Metallothioneins (MTHs) are small cysteine-rich polypeptides that binds cationic metals at physiologic pH ranges through noncovalent -SH ligand interactions. Some leucine-rich renal MTHs have a particular avidity for bismuth. The authors have examined the ability of MTHs to selectively incorporate Bi-212, a short-lived high-energy alpha particle emitter currently under exploration as a potential therapeutic radiolabel for use in molecularly targeted cancer therapy. They find that under physiologic conditions, MTH will selectively incorporate Bi-212 after incubation with an equilibrium mixture of its upstream and downstream parents. The MTH moieties may be linked to tumor-binding macromolecules such as antibodies via thiolation reactions using SPDP, and the resultant Bismuth-avid molecules may be used either as primary delivery vehicles for the Bi-212 or as part of a 2-step release-and-catch isotope localization system in which the MTH-antibody conjugate is pre-localized at the tumor site and the radiometal is then administered and chelated in situ. They present the chemistry, dosimetry and potential clinical applications of this system

  12. Evaluation of the efficiency of bismuth breast shield in CT chest paediatric examinations

    International Nuclear Information System (INIS)

    Sevillano, D.; Espana, M. L.; Castro, P.; Minguez, C.; Albi, G.; Garcia, E.; Lopez Franco, P.

    2006-01-01

    The aim of this study is to evaluate the efficiency of bismuth breast shield in CT chest paediatric examinations when automatic exposure control techniques are used. The influence in the radiation dose and the image quality has been evaluated with and without the breast shield in the scoutview. In addition the radiation dose in shielded and non-shielded areas has been compared. Measurements were made in a 16 cm diameter cylindrical PMMA phantom simulating a newborn, and older children were simulated controlling the maximum intensities allowed by the automatic exposure control system AutomA. The highest dose reduction (59%) was obtained with AutomA system and when the breast shield is not used in the scoutview. This reduction in the radiation dose does not mean a significant increase of noise level. The use of the breast shield in the scoutview yielded an increase in the radiation dose in non-shielded areas. The use of bismuth breast shield is recommended only after the scoutview in order to optimise the radiation dose in CT chest paediatric examination when using automatic exposure control AutomA. (Author)

  13. Improved methods of online monitoring and prediction in condensate and feed water system of nuclear power plant

    International Nuclear Information System (INIS)

    Wang, Hang; Peng, Min-jun; Wu, Peng; Cheng, Shou-yu

    2016-01-01

    Highlights: • Different methods for online monitoring and diagnosis are summarized. • Numerical simulation modeling of condensate and feed water system in nuclear power plant are done by FORTRAN programming. • Integrated online monitoring and prediction methods have been developed and tested. • Online monitoring module, fault diagnosis module and trends prediction module can be verified with each other. - Abstract: Faults or accidents may occur in a nuclear power plant (NPP), but it is hard for operators to recognize the situation and take effective measures quickly. So, online monitoring, diagnosis and prediction (OMDP) is used to provide enough information to operators and improve the safety of NPPs. In this paper, distributed conservation equation (DCE) and artificial immunity system (AIS) are proposed for online monitoring and diagnosis. On this basis, quantitative simulation models and interactive database are combined to predict the trends and severity of faults. The effectiveness of OMDP in improving the monitoring and prediction of condensate and feed water system (CFWS) was verified through simulation tests.

  14. Winter-feeding systems for gestating sheep I. Effects on pre- and postpartum ewe performance and lamb progeny preweaning performance.

    Science.gov (United States)

    Radunz, A E; Fluharty, F L; Zerby, H N; Loerch, S C

    2011-02-01

    Mature pregnant crossbred ewes (n = 90) were used in a randomized complete block design and assigned to 1 of 3 winter-feeding systems differing in primary feed source: haylage (HL), limit-fed corn (CN), or limit-fed dried distillers grains (DDGS). Effects of these winter-feeding strategies on ewe and lamb performance were determined. Diets were formulated to meet or exceed NRC (1985) nutrient requirements during gestation and were fed from about d 60 of gestation until parturition. All ewes were fed a common diet postpartum. Every 2 wk during gestation, BW and BCS were collected and diets were adjusted to maintain similar BW gain for ewes fed CN and DDGS vs. HL. At 80 and 122 d of gestation, jugular blood samples were collected at 0, 3, 6, and 9 h postfeeding to measure plasma glucose, insulin, NEFA, and blood urea nitrogen concentrations. At birth, 6 lambs per treatment were killed to measure body composition. At 28 ± 2 d postpartum, milk yield was measured. Lambs were weaned at 61 ± 4 d of age. During mid gestation (d 60 to 115), BW gain of ewes was similar among treatments; however, at d 115 of gestation ewes fed HL had a smaller (P = 0.04) BCS than ewes fed DDGS or CN. Plasma glucose concentrations were greater (P ≤ 0.004) in ewes fed CN than in those fed HL or DDGS just before feeding on d 80 and 122 of gestation, whereas ewes fed DDGS vs. CN or HL had greater (P ≤ 0.04) plasma insulin concentrations at 3 h postfeeding. At parturition, ewe BW was greatest for DDGS, least for HL, and intermediate for CN (P ≤ 0.003). Ewes fed CN and DDGS had greater BCS at parturition than those fed HL, but by weaning, ewes fed DDGS had greater BCS (P ≤ 0.05) than those fed CN or HL. Birth BW tended (P = 0.09) to be heavier for lambs from ewes fed CN and DDGS than from those fed HL prepartum, but there was no difference (P = 0.19) due to ewe gestation diet on lamb BW at weaning. At birth, lamb muscle, bone, organ, and fat measures were not affected (P > 0.13) by

  15. Effects of feeding system on growth performance, plasma biochemical components and hormones, and carcass characteristics in Hanwoo steers

    Directory of Open Access Journals (Sweden)

    Chan Sung Chung

    2017-08-01

    Full Text Available Objective This study was conducted to compare growth performance, blood components and carcass traits by two feeding systems (concentrate with roughage separately [CON] vs total mixed ration [TMR] in Hanwoo steers, and to learn the relationship between blood components during fattening or finishing phases and carcass traits in Hanwoo steers. Methods Sixty steers aged 8 months were allotted to two feeding systems and fed similar amounts of average dry matter and total digestible nutrient throughout whole experimental period according to each feeding program. Steers were weighed monthly, taken blood at the end of growing, fattening and finishing periods, and slaughtered at 30 month of age. Results Growing performance was higher (p<0.05 in the CON group compared to the TMR group during fattening and finishing periods. The CON group was lower (p<0.05 in blood aspartic acid transaminase, blood urea nitrogen and retinol levels during growing period, but higher in triglyceride and cholesterol levels during fattening and finishing periods compared to the TMR group. The CON group was greater (p<0.05 in rib-eye area, and lighter (p<0.05 red in meat color compared to the TMR group. In the correlation coefficients between blood components of steers and carcass traits, retinol had a negative (p<0.05 correlation with marbling score and rib-eye area. Leptin had a positive (p<0.05 correlation with back fat thickness. Blood cholesterol and triglyceride were positively (p<0.05 correlated with carcass weight and rib-eye area. Conclusion Growth performance, carcass ribeye area and meat color showed a more desirable result in the CON compared to the TMR in Hanwoo steers. Assessing the accumulated data of carcass traits with blood components including hormones—particularly retinol, cholesterol, triglyceride, and leptin—during the fattening or finishing phases, it may be possible to find a biomarker for determining beef quality in living animals.

  16. Control of p-type and n-type thermoelectric properties of bismuth telluride thin films by combinatorial sputter coating technology

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Masahiro, E-mail: goto.masahiro@nims.go.jp [Thermoelectric Materials Group, Center for Green Research on Energy and Environmental Materials, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Thermal Management and Thermoelectric Materials Group, Center for Materials Research by Information Integration (CMI2), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Sasaki, Michiko [Thermal Management and Thermoelectric Materials Group, Center for Materials Research by Information Integration (CMI2), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Xu, Yibin [Thermal Management and Thermoelectric Materials Group, Center for Materials Research by Information Integration (CMI2), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Materials Database Group, Center for Materials Research by Information Integration (CMI2), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Zhan, Tianzhuo [Thermal Management and Thermoelectric Materials Group, Center for Materials Research by Information Integration (CMI2), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Isoda, Yukihiro [Thermoelectric Materials Group, Center for Green Research on Energy and Environmental Materials, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Shinohara, Yoshikazu [Thermoelectric Materials Group, Center for Green Research on Energy and Environmental Materials, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Thermal Management and Thermoelectric Materials Group, Center for Materials Research by Information Integration (CMI2), National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)

    2017-06-15

    Highlights: • p- and n-type bismuth telluride thin films have been synthesized using a combinatorial sputter coating system (COSCOS) while changing only one of the experimental conditions, the RF power. • The dimensionless figure of merit (ZT) was optimized by the technique. • The fabrication of a Π-structured TE device was demonstrated. - Abstract: p- and n-type bismuth telluride thin films have been synthesized by using a combinatorial sputter coating system (COSCOS). The crystal structure and crystal preferred orientation of the thin films were changed by controlling the coating condition of the radio frequency (RF) power during the sputter coating. As a result, the p- and n-type films and their dimensionless figure of merit (ZT) were optimized by the technique. The properties of the thin films such as the crystal structure, crystal preferred orientation, material composition and surface morphology were analyzed by X-ray diffraction, energy-dispersive X-ray spectroscopy and atomic force microscopy. Also, the thermoelectric properties of the Seebeck coefficient, electrical conductivity and thermal conductivity were measured. ZT for n- and p-type bismuth telluride thin films was found to be 0.27 and 0.40 at RF powers of 90 and 120 W, respectively. The proposed technology can be used to fabricate thermoelectric p–n modules of bismuth telluride without any doping process.

  17. An ecotoxicological study on tin- and bismuth-catalysed PDMS based coatings containing a surface-active polymer.

    Science.gov (United States)

    Pretti, Carlo; Oliva, Matteo; Mennillo, Elvira; Barbaglia, Martina; Funel, Marco; Reddy Yasani, Bhaskar; Martinelli, Elisa; Galli, Giancarlo

    2013-12-01

    Novel films were prepared by condensation curing reaction of a poly(dimethyl siloxane) (PDMS) matrix with bismuth neodecanoate and dibutyltin diacetate catalysts. An ecotoxicological study was performed on the leachates of the coatings using the bacterium Vibrio fischeri, the unicellular alga Dunaliella tertiolecta, the crustacean Artemia salina and the fish Sparus aurata (larvae) as testing organisms. A copper-based self-polishing commercial paint was also tested as reference. The results showed that the tin-catalysed coatings and the copper paint were highly toxic against at least two of the four test organisms, whereas bismuth-catalysed coatings did not show any toxic effect. Moreover, the same biological assessment was also carried out on PDMS coatings containing a surface-active fluorinated polymer. The toxicity of the entire polymeric system resulted only from the tin catalyst used for the condensation curing reaction, as the bismuth catalysed coatings incorporating the surface-active polymer remained atoxic toward all the tested organisms. © 2013 Elsevier Inc. All rights reserved.

  18. Food and Nutrition Surveillance System/SISVAN: getting to know the feeding habits of infants under 24 months of age

    Directory of Open Access Journals (Sweden)

    Luciola de Castro Coelho

    2015-03-01

    Full Text Available The objective of the Food and Nutrition Surveillance System (SISVAN is to monitor the food intake of individuals attended by the Brazilian Unified Health System (SUS. The objective of this research was to identify the feeding practices of children under 24 months of age who were attended at Primary Healthcare Units (UBS, using SISVAN, and to assess the relationship with maternal sociodemographic profiles. A cross-sectional study was conducted in order to evaluate 350 children using the Food Consumption Marker Form of SISVAN, and maternal demographic data to identify sociodemographic profiles by exploratory factor analysis. Of the children assessed, 41.1% were under 6 months of age and 98.7% of those between 6 and 23 months had an inadequate intake. Two sociodemographic profiles were found: Profile 1 (mothers with lower income, less education, and recipients of the 'Bolsa Família' conditional family grant program associated with the consumption of water/tea, cow's milk and salty baby food; and Profile 2 (older mothers with many children and with a larger number of residents in the household associated with breast milk consumption (p = 0.048. The use of SISVAN made it possible to identify that children had inadequate feeding practices, and Profile 1 appears to be a risk profile for weaning.

  19. Effect of Stiffness of Rolling Joints on the Dynamic Characteristic of Ball Screw Feed Systems in a Milling Machine

    Directory of Open Access Journals (Sweden)

    Dazhong Wang

    2015-01-01

    Full Text Available Dynamic characteristic of ball screw feed system in a milling machine is studied numerically in this work. In order to avoid the difficulty in determining the stiffness of rolling joints theoretically, a dynamic modeling method for analyzing the feed system is discussed, and a stiffness calculation method of the rolling joints is proposed based on the Hertz contact theory. Taking a 3-axis computer numerical control (CNC milling machine set ermined as a research object, the stiffness of its fixed joint between the column and the body together with the stiffness parameters of the rolling joints is evaluated according to the Takashi Yoshimura method. Then, a finite element (FE model is established for the machine tool. The correctness of the FE model and the stiffness calculation method of the rolling joints are validated by theoretical and experimental modal analysis results of the machine tool’s workbench. Under the two modeling methods of joints incorporating the stiffness parameters and rigid connection, a theoretical modal analysis is conducted for the CNC milling machine. The natural frequencies and modal shapes reveal that the joints’ dynamic characteristic has an important influence on the dynamic performance of a whole machine tool, especially for the case with natural frequency and higher modes.

  20. Food and Nutrition Surveillance System/SISVAN: getting to know the feeding habits of infants under 24 months of age.

    Science.gov (United States)

    Coelho, Luciola de Castro; Asakura, Leiko; Sachs, Anita; Erbert, Ingrid; Novaes, Claudia Dos Reis Lisboa; Gimeno, Suely Godoy Agostinho

    2015-03-01

    The objective of the Food and Nutrition Surveillance System (SISVAN) is to monitor the food intake of individuals attended by the Brazilian Unified Health System (SUS). The objective of this research was to identify the feeding practices of children under 24 months of age who were attended at Primary Healthcare Units (UBS), using SISVAN, and to assess the relationship with maternal sociodemographic profiles. A cross-sectional study was conducted in order to evaluate 350 children using the Food Consumption Marker Form of SISVAN, and maternal demographic data to identify sociodemographic profiles by exploratory factor analysis. Of the children assessed, 41.1% were under 6 months of age and 98.7% of those between 6 and 23 months had an inadequate intake. Two sociodemographic profiles were found: Profile 1 (mothers with lower income, less education, and recipients of the 'Bolsa Família' conditional family grant program) associated with the consumption of water/tea, cow's milk and salty baby food; and Profile 2 (older mothers with many children and with a larger number of residents in the household) associated with breast milk consumption (p = 0.048). The use of SISVAN made it possible to identify that children had inadequate feeding practices, and Profile 1 appears to be a risk profile for weaning.

  1. Inhibition of opioid systems in the hypothalamus as well as the mesolimbic area suppresses feeding behavior of mice.

    Science.gov (United States)

    Ikeda, H; Ardianto, C; Yonemochi, N; Yang, L; Ohashi, T; Ikegami, M; Nagase, H; Kamei, J

    2015-12-17

    Opioid receptors, especially μ-opioid receptors, in the ventral tegmental area (VTA) and nucleus accumbens (NAcc) are reported to regulate food motivation. However, the roles of μ-, δ- and κ-opioid receptors are not fully understood. Moreover, since μ-, δ- and κ-opioid receptors are reported to distribute in the hypothalamus, these receptors in the hypothalamus might regulate feeding behavior. Thus, the present study investigated the role of μ-, δ- and κ-opioid receptors in the VTA, the NAcc and the hypothalamus in the regulation of feeding behavior. Male ICR mice were subjected to a feeding test after food deprivation for 16h. The mRNA levels of proopiomelanocortin (POMC), preproenkephalin (PENK) and prodynorphin (PDYN), the precursors of endogenous opioid peptides, were measured by reverse transcription-polymerase chain reaction (RT-PCR). The systemic injection of non-selective (naloxone) and selective μ (β-funaltrexamine; β-FNA), δ (naltrindole) and κ (norbinaltorphimine; norBNI) opioid receptor antagonists markedly reduced food intake. In contrast, the systemic injection of preferential μ (morphine), selective δ (KNT-127) and κ (U-50,488) opioid receptor agonists did not change food intake. The mRNA levels of POMC, PENK and PDYN were decreased in the hypothalamus and the midbrain after food deprivation, whereas the mRNA levels of PENK and PDYN, but not POMC, were decreased in the ventral striatum. The injection of naloxone into the NAcc, VTA and lateral hypothalamus (LH), but not the ventromedial nucleus of the hypothalamus, significantly decreased food intake. The injection of β-FNA and naltrindole into the LH, but not the VTA or NAcc, decreased food intake. The injection of norBNI into the LH and VTA, but not the NAcc, decreased food intake. These results indicate that μ-, δ- and κ-opioid receptors in the LH play a more important role in the regulation of feeding behavior than those receptors in the VTA and the NAcc. Copyright © 2015

  2. The effect of biologically active feed additives of humilid substances on the antioxidant system in liver mitochondria of gerbils

    Directory of Open Access Journals (Sweden)

    O. O. Dyomshina

    2017-04-01

    Full Text Available Mitochondria are organelles that are most sensitive to the action of stressors on any cell of the entire organism and exposure to chemicals which can cause its dysfunction and cell death in general. Especially sensitive to adverse conditions are liver mitochondria, where the processes of biotransformation of endogenous and exogenous metabolites are formed, not only in the liver, but also in other organs and tissues. Mitochondrial dysfunction can cause instant hepatic cytolysis and steatosis. Therefore, early detection of mitochondrial toxicity is important during preclinical studies of new pharmacological agents, as this will help avoid remote negative effects. The biologically active feed additive Humilid, a complex of humic acids known for their antidiarrheal, analgesic, immune-stimulating, and antimicrobial properties; shows a corrective effect on the activity of the lysosomal cathepsin; enhances the positive effect of hematopoiesis on hemoglobin and its quality indicators consisting of red blood cells; and activates the synthesis and accumulation of fibronectin expression that takes part in the formation of immunological protection of animals. The objective of our experiment was to determine the effect of complex biologically active feed additives based on humic substances on the biochemical indicators of the liver mitochondrial antioxidant system of Mongolian gerbils (Meriones unguiculatus Milne-Edwards, 1867. The experiment was conducted on mature (6 months Mongolian gerbils. The data obtained showing the influence of the biologically active feed additives Humilid, alone or in combination with ascorbate and Eco-impulse Animal, on the antioxidant defense system of liver mitochondria of gerbils are presented in this article. The proven antioxidant effect of humic substances in the mitochondrial fraction of the liver which inhibits the accumulation of oxidized products in the cells is shown, confirmed by the decrease in the number of TBA

  3. Effect of postweaning heifer development system on average daily gain, pregnancy rates, and subsequent feed efficiency as a pregnant heifer.

    Science.gov (United States)

    Springman, S A; Nielson, H R; Meyer, T L; Funston, R N

    2017-12-01

    A 3-yr study utilized 300 Angus-based, spring-born heifers to evaluate postweaning heifer development systems on gain, reproductive performance, and feed efficiency as a pregnant heifer. Heifers were blocked by BW and randomly assigned to graze corn residue (CR), upland range (RANGE), or were fed 1 of 2 diets in a drylot differing in energy levels: high (DLHI) or low (DLLO). Heifers developed on DLHI and DLLO were managed within the drylot for 166 d in yr 1, 150 d in yr 2, and 162 d in yr 3. Heifers developed on RANGE grazed winter range for an equivalent amount of days each yr as the DLHI and DLLO heifers. Heifers assigned to CR grazed for 103 d in yr 1, 84 d in yr 2, and 97 d in yr 3 before being transported to graze winter range for the remainder of the treatment period. All heifers were managed as a single group following the treatment period. Artificial insemination and natural mating were utilized during breeding. Percent of mature BW prior to the breeding season was greater ( = 0.02) for DLHI (67%) compared with RANGE (59%) and CR (58%). Pregnancy rates to AI were not different ( = 0.51) among treatments (59 ± 6%), and final pregnancy rates were also not different (87 ± 4%, = 0.54). A subset of AI-pregnant heifers from each treatment were placed in a Calan gate feeding system. Heifers were allowed a 20-d acclimation period before beginning the 90 d trial at approximately 170 d in gestation. Heifers were offered ad libitum hay; amount offered was recorded daily and orts collected weekly. Initial BW was not different ( = 0.58) among treatments (459 ± 11 kg). Body weight at the end of the trial (497 ± 17 kg) was also not different ( = 0.41). Intake was not different ( = 0.33), either as DMI (10.00 ± 1.07 kg) or residual feed intake (0.018 ± 0.190). There was no difference in ADG ( = 0.36, 0.42 ± 0.23 kg/d) among treatments. Although the total development cost was not different among treatments ( = 0.99), there was a $41 difference ( feed efficiency as a

  4. Synthesis of Bismuth Oxide Thin Films Deposited by Reactive Magnetron Sputtering

    International Nuclear Information System (INIS)

    Iljinas, A.; Burinskas, S.; Dudonis, J.

    2011-01-01

    In this work Bi 2 O 3 thin films were deposited onto the Si (111) and soda lime glass substrates by the reactive direct current magnetron sputtering system using pure Bi as a sputtering target. The dependences of electro-optical characteristics of the films on the substrate type and temperature were investigated. Transmittance and reflectance of the Bi 2 O 3 films were measured with ultraviolet and visible light spectrometer. It was found that the substrate temperature during deposition has a very strong influence on the phase components of thin films. The results indicate that the direct allowed transitions dominate in the films obtained in this work. For the direct allowed transitions the band gap energy is found to be about 1.98 eV and 2.2 eV. The reflectance of thin bismuth oxide film depends on the substrate. Small transparency of thin films grown on glass is more related to large reflectance than absorption. The reflectance spectra of the bismuth oxide thin films deposited on the Si substrates show higher quality of optical characteristics compared to the samples deposited on glass substrates. (author)

  5. Preparation and Elastic Moduli of Germanate Glass Containing Lead and Bismuth

    Directory of Open Access Journals (Sweden)

    Wan M. M. Yunus

    2012-04-01

    Full Text Available This paper reports the rapid melt quenching technique preparation for the new family of bismuth-lead germanate glass (BPG systems in the form of (GeO260–(PbO40−x–(½Bi2O3x where x = 0 to 40 mol%. Their densities with respect of Bi2O3 concentration were determined using Archimedes’ method with acetone as a floatation medium. The current experimental data are compared with those of bismuth lead borate (B2O320–(PbO80−x–(Bi2O3x. The elastic properties of BPG were studied using the ultrasonic pulse-echo technique where both longitudinal and transverse sound wave velocities have been measured in each glass samples at a frequency of 15 MHz and at room temperature. Experimental data shows that all the physical parameters of BPG including density and molar volume, both longitudinal and transverse velocities increase linearly with increasing of Bi2O3 content in the germanate glass network. Their elastic moduli such as longitudinal, shear and Young’s also increase linearly with addition of Bi2O3 but the bulk modulus did not. The Poisson’s ratio and fractal dimensionality are also found to vary linearly with the Bi2O3 concentration.

  6. Preparation and Elastic Moduli of Germanate Glass Containing Lead and Bismuth

    Science.gov (United States)

    Sidek, Hj A. A.; Bahari, Hamid R.; Halimah, Mohamed K.; Yunus, Wan M. M.

    2012-01-01

    This paper reports the rapid melt quenching technique preparation for the new family of bismuth-lead germanate glass (BPG) systems in the form of (GeO2)60–(PbO)40−x–(½Bi2O3)x where x = 0 to 40 mol%. Their densities with respect of Bi2O3 concentration were determined using Archimedes’ method with acetone as a floatation medium. The current experimental data are compared with those of bismuth lead borate (B2O3)20–(PbO)80−x–(Bi2O3)x. The elastic properties of BPG were studied using the ultrasonic pulse-echo technique where both longitudinal and transverse sound wave velocities have been measured in each glass samples at a frequency of 15 MHz and at room temperature. Experimental data shows that all the physical parameters of BPG including density and molar volume, both longitudinal and transverse velocities increase linearly with increasing of Bi2O3 content in the germanate glass network. Their elastic moduli such as longitudinal, shear and Young’s also increase linearly with addition of Bi2O3 but the bulk modulus did not. The Poisson’s ratio and fractal dimensionality are also found to vary linearly with the Bi2O3 concentration. PMID:22606000

  7. Crystal Field Parameters and Optical Parameters of Nd3+ in Sodium Bismuth Silicate Glass

    Directory of Open Access Journals (Sweden)

    Vinoy Thomas

    2015-06-01

    Full Text Available Neodymium doped sodium bismuth silicate glasses were prepared by the melt quench technique. Optical absorption spectra of the Nd3+ion in the present glassy systems were recorded in the UV-Vis-NIR region. Taylor series expansion method was adopted for theoretical evaluation of various crystal field parameters such as the Slater-Condon (F2,F4,F6, spin orbit and Racah parameters (E1,E2,E3. Oscillator strength and electric dipole line strength of the observed transitions were evaluated with the help of Judd-Ofelt (JO theory. Radiative transition probability (A, total radiative transition probability (At, radiative life time (trad, branching ratios (b and integrated absorption (sa cross section for stimulated emission between the meta stable state 4F3/2 and 4IJ ( J= 15/2,13/2,11/2 and 9/2 levels were calculated using JO parameters. Optical basicity of the glass was found to increase with the addition of  bismuth.

  8. Nutritional and ecological evaluation of dairy farming systems based on concentrate feeding regimes in semi-arid environments of Jordan.

    Science.gov (United States)

    Alqaisi, Othman; Hemme, Torsten; Hagemann, Martin; Susenbeth, Andreas

    2014-01-01

    The objective of this study was to evaluate the nutritional and ecological aspects of feeding systems practiced under semi-arid environments in Jordan. Nine dairy farms representing the different dairy farming systems were selected for this study. Feed samples (n = 58), fecal samples (n = 108), and milk samples (n = 78) were collected from the farms and analysed for chemical composition. Feed samples were also analysed for metabolisable energy (ME) contents and in vitro organic matter digestibility according to Hohenheim-Feed-Test. Furthermore, fecal nitrogen concentration was determined to estimate in vivo organic matter digestibility. ME and nutrient intakes were calculated based on the farmer's estimate of dry matter intake and the analysed composition of the feed ingredients. ME and nutrient intakes were compared to recommended standard values for adequate supply of ME, utilizable crude protein, rumen undegradable crude protein (RUCP), phosphorus (P), and calcium (Ca). Technology Impact Policy Impact Calculation model complemented with a partial life cycle assessment model was used to estimate greenhouse gas emissions of milk production at farm gate. The model predicts CH4, N2O and CO2 gases emitted either directly or indirectly. Average daily energy corrected milk yield (ECM) was 19 kg and ranged between 11 and 27 kg. The mean of ME intake of all farms was 184 MJ/d with a range between 115 and 225 MJ/d. Intake of RUCP was lower than the standard requirements in six farms ranging between 19 and 137 g/d, was higher (32 and 93 g/d) in two farms, and matched the requirements in one farm. P intake was higher than the requirements in all farms (mean oversupply = 19 g/d) and ranged between 3 and 30 g/d. Ca intake was significantly below the requirements in small scale farms. Milk nitrogen efficiency N-eff (milk N/intake N) varied between 19% and 28% and was mainly driven by the level of milk yield. Total CO2 equivalent (CO2 equ) emission ranged

  9. Rapid semi-quantitative determination of bismuth in minerals using ascending paper chromatography (1961)

    International Nuclear Information System (INIS)

    Agrinier, H.

    1961-01-01

    The bismuth is separated by a solvent made up of acetone, water, and hydrofluoric and hydrochloric acids. The bismuth is developed with dimercapto-2.5 thio-diazole-1.3.4 and ammonium sulphide. The use of this method for the detection of bismuth in minerals makes it possible to determine the metal at a concentration of 5 x 10 -6 . (author) [fr

  10. Treatment of coal gasification wastewater by a two-continuous UASB system with step-feed for COD and phenols removal

    Energy Technology Data Exchange (ETDEWEB)

    Wang, W.; Han, H.J.; Yuan, M.; Li, H.Q.; Fang, F.; Wang, K. [Harbin Institute of Technology, Harbin (China)

    2011-05-15

    A two-continuous mesophilic (37 {+-} 2{sup o}C) UASB system with step-feed was investigated as an attractive optimization strategy for enhancing COD and total phenols removal of the system and improving aerobic biodegradability of real coal gasification wastewater. Through the step-feed period, the maximum removal efficiencies of COD and total phenols reached 55-60% and 58-63% respectively in the system, at an influent flow distribution ratio of 0.2 and influent COD concentration of 2500 mg/L; the corresponding efficiencies were at low levels of 45-50% and 43-50% respectively at total HRT of 48 h during the single-feed period. The maximum specific methanogenic activity and substrate utilization rate were 592 {+-} 16 mg COD-CH{sub 4}/(gVSS d) and 89 {+-} 12 mg phenol/(gVSS d) during the step-feed operation. After the anaerobic digestion with step-feed, the aerobic effluent COD concentration decreased from 270 {+-} 9 to 215 {+-} 10 mg/L. The results suggested that step-feed enhanced the degradation of refractory organics in the second reactor.

  11. METHOD OF SEPARATING FISSION PRODUCTS FROM FUSED BISMUTH-CONTAINING URANIUM

    Science.gov (United States)

    Wiswall, R.H.

    1958-06-24

    A process is described for removing metal selectively from liquid metal compositions. The method effects separation of flssion product metals selectively from dilute solution in fused bismuth, which contains uraniunn in solution without removal of more than 1% of the uranium. The process comprises contacting the fused bismuth with a fused salt composition consisting of sodium, potassium and lithium chlorides, adding to fused bismuth and molten salt a quantity of bismuth chloride which is stoichiometrically required to convert the flssion product metals to be removed to their chlorides which are more stable in the fused salt than in the molten metal and are, therefore, preferentially taken up in the fused salt phase.

  12. Bismuth(III) deferiprone effectively inhibits growth of Desulfovibrio desulfuricans ATCC 27774.

    Science.gov (United States)

    Barton, Larry L; Lyle, Daniel A; Ritz, Nathaniel L; Granat, Alex S; Khurshid, Ali N; Kherbik, Nada; Hider, Robert; Lin, Henry C

    2016-04-01

    Sulfate-reducing bacteria have been implicated in inflammatory bowel diseases and ulcerative colitis in humans and there is an interest in inhibiting the growth of these sulfide-producing bacteria. This research explores the use of several chelators of bismuth to determine the most effective chelator to inhibit the growth of sulfate-reducing bacteria. For our studies, Desulfovibrio desulfuricans ATCC 27774 was grown with nitrate as the electron acceptor and chelated bismuth compounds were added to test for inhibition of growth. Varying levels of inhibition were attributed to bismuth chelated with subsalicylate or citrate but the most effective inhibition of growth by D. desulfuricans was with bismuth chelated by deferiprone, 3-hydroxy-1,2-dimethyl-4(1H)-pyridone. Growth of D. desulfuricans was inhibited by 10 μM bismuth as deferiprone:bismuth with either nitrate or sulfate respiration. Our studies indicate deferiprone:bismuth has bacteriostatic activity on D. desulfuricans because the inhibition can be reversed following exposure to 1 mM bismuth for 1 h at 32 °C. We suggest that deferiprone is an appropriate chelator for bismuth to control growth of sulfate-reducing bacteria because deferiprone is relatively nontoxic to animals, including humans, and has been used for many years to bind Fe(III) in the treatment of β-thalassemia.

  13. Bismuth uptake in the kidney as a test of absorption from the gastrointestinal tract in mice

    International Nuclear Information System (INIS)

    Renault, Henri; Rapin, J.R.; Bralet, A.-M.

    1976-01-01

    The absorption of bismuth administered per os as an insoluble salt: basic nitrate and phosphate, labeled with 206 Bi was studied. The bismuth amounts in blood and most tissues were too small to be detected. However kidneys took up a significant bismuth quantity which allowed to measure the absorption of the metal through digestive wall. Bismuth absorption from phosphate, a very insoluble salt, was much less than that which was obtained from basic nitrate; this latter is an example of partially soluble salt in the stomach [fr

  14. Nanophotonic Modulator with Bismuth Ferrite as Low-loss Switchable Material

    DEFF Research Database (Denmark)

    Babicheva, Viktoriia; Zhukovsky, Sergei; Lavrinenko, Andrei

    2015-01-01

    We propose a nanophotonic waveguide modulator with bismuth ferrite as a tunable material. Due to near-zero losses in bismuth ferrite, modulation with up to 20 dB/μm extinction ratio and 12 μm propagation length is achieved.......We propose a nanophotonic waveguide modulator with bismuth ferrite as a tunable material. Due to near-zero losses in bismuth ferrite, modulation with up to 20 dB/μm extinction ratio and 12 μm propagation length is achieved....

  15. The Use of an Automated System (GreenFeed) to Monitor Enteric Methane and Carbon Dioxide Emissions from Ruminant Animals.

    Science.gov (United States)

    Hristov, Alexander N; Oh, Joonpyo; Giallongo, Fabio; Frederick, Tyler; Weeks, Holley; Zimmerman, Patrick R; Harper, Michael T; Hristova, Rada A; Zimmerman, R Scott; Branco, Antonio F

    2015-09-07

    Ruminant animals (domesticated or wild) emit methane (CH4) through enteric fermentation in their digestive tract and from decomposition of manure during storage. These processes are the major sources of greenhouse gas (GHG) emissions from animal production systems. Techniques for measuring enteric CH4 vary from direct measurements (respiration chambers, which are highly accurate, but with limited applicability) to various indirect methods (sniffers, laser technology, which are practical, but with variable accuracy). The sulfur hexafluoride (SF6) tracer gas method is commonly used to measure enteric CH4 production by animal scientists and more recently, application of an Automated Head-Chamber System (AHCS) (GreenFeed, C-Lock, Inc., Rapid City, SD), which is the focus of this experiment, has been growing. AHCS is an automated system to monitor CH4 and carbon dioxide (CO2) mass fluxes from the breath of ruminant animals. In a typical AHCS operation, small quantities of baiting feed are dispensed to individual animals to lure them to AHCS multiple times daily. As the animal visits AHCS, a fan system pulls air past the animal's muzzle into an intake manifold, and through an air collection pipe where continuous airflow rates are measured. A sub-sample of air is pumped out of the pipe into non-dispersive infra-red sensors for continuous measurement of CH4 and CO2 concentrations. Field comparisons of AHCS to respiration chambers or SF6 have demonstrated that AHCS produces repeatable and accurate CH4 emission results, provided that animal visits to AHCS are sufficient so emission estimates are representative of the diurnal rhythm of rumen gas production. Here, we demonstrate the use of AHCS to measure CO2 and CH4 fluxes from dairy cows given a control diet or a diet supplemented with technical-grade cashew nut shell liquid.

  16. Influence of bismuth on structural, elastic and spectroscopic properties of Nd{sup 3+} doped Zinc–Boro-Bismuthate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Gaurav; Sontakke, Atul D.; Karmakar, P.; Biswas, K.; Balaji, S.; Saha, R.; Sen, R.; Annapurna, K., E-mail: annapurnak@cgcri.res.in

    2014-05-01

    The present investigation reports, influence of bismuth addition on structural, elastic and spectral properties of [(99.5−x) {4ZnO−3B_2O_3}−0.5Nd{sub 2}O{sub 3}−x Bi{sub 2}O{sub 3} where x=0, 5, 10, 20, 30, 40, 50 and 60] glasses. The measured FTIR reflectance spectra facilitated a thorough insight of methodical modifications that are arising in the glass structure from borate (build by BO{sub 3} and BO{sub 4} units) to bismuthate (BiO{sub 3} and BiO{sub 6} units) network due to the increase of bismuth content ensuing with a steady decrease in host phonon energy (ν{sub ph}). The elastic properties estimated from measured longitudinal and shear ultrasonic velocities (U{sub L} and U{sub s}) demonstrated the reduction in network rigidity of glasses on Bi{sub 2}O{sub 3} inclusion. The three phenomenological Judd–Ofelt intensity parameters (Ω{sub 2,4,6}) were obtained from recorded absorption spectra of Nd{sup 3+} ions in these glasses and have been used to predict radiative properties as a function of variation in bismuth content. The reduced host phonon energy and high optical basicity effect due to Bi{sub 2}O{sub 3} incorporation remarkably improved the Nd{sup 3+} luminescence properties such as emission intensity, quantum yield and emission cross-section. The quantum yield showed a strong increase from mere 16% in Zinc–Borate glass to almost 73% in 60 mol% Bi{sub 2}O{sub 3} containing glass. Similarly, the emission cross-section for Nd{sup 3+4}F{sub 3/2}→{sup 4}I{sub 11/2} laser transition raised from 2.43×10{sup −20} cm{sup 2} to 3.95×10{sup −20} cm{sup 2} in studied concentration suggesting a strong improvement in Nd{sup 3+} laser spectroscopic properties in Zinc–Boro-Bismuthate glass. These materials may be promising for compact solid state infrared lasers. - Highlights: • Continuous structural changes associated with reduction in host phonon energy by Bi{sub 2}O{sub 3} inclusion. • Ultrasonic velocity study revealed reduced Debye

  17. Colloidal bismuth subcitrate in non-ulcer dyspepsia.

    Directory of Open Access Journals (Sweden)

    Khanna M

    1992-07-01

    Full Text Available The effect of colloidal bismuth subcitrate (De-Nol on symptoms, Helicobacter pylori status and histological features was studied in 35 patients with non-ulcer dyspepsia. Pain (34 cases and gas bloat (18 were the predominant symptoms. H pylori was present in 26 (74.3% patients. Gastritis and duodenitis were present in 29 of 32 and 22 of 31 cases respectively in whom biopsies were available. Relief in symptoms after treatment was seen in 29 (82.8% cases. Improvement in gastritis and duodenitis was noted in 60.8% and 58.8% respectively; over 70% of H pylori positive patients cleared the organism. These changes did not correlate with the relief in symptoms. We conclude that colloidal bismuth subcitrate is effective in the short term treatment of non-ulcer dyspepsia. It also clears H pylori infection and results in improvement of histological features.

  18. Chrysanthemum-like bismuth sulfide microcrystals: Synthesis, characterization, and properties

    Science.gov (United States)

    Jiang, Jinghui; Gao, Guanhua; Yu, Runnan; Qiu, Guanzhou; Liu, Xiaohe

    2011-02-01

    Uniform chrysanthemum-like bismuth sulfide (Bi 2S 3) microcrystals assembled from nanosheet building blocks were successfully synthesized via a convenient hydrothermal synthetic route under mild conditions in which hydrated bismuth nitrate and L-cysteine were employed to supply Bi and S source and ethylenediaminetetraacetic acid disodium salt (EDTA-Na 2) was employed as chelating agent. The influences of reaction temperatures and time on the morphologies of final products were investigated. The phase structures, morphologies, and properties of as-prepared products were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscope, and photoluminescence spectra. The possible growth mechanism for the formation of chrysanthemum-like Bi 2S 3 microcrystals was discussed on the basis of the experimental results.

  19. X-ray Investigations of Liquid Bismuth-Copper Alloys

    Science.gov (United States)

    Nzali, J. Nomssi; Hoyer, W.

    2000-04-01

    Liquid copper, bismuth, and eleven bismuth-copper alloys were investigated at temperatures above the liquidus with X-ray diffraction. The experimental procedure was adjusted to reduce the effects of evaporation. The Faber-Ziman total structure factors S(Q) feature a splitting of the first maximum and negative values for Q around 1 Å -1 in a large concentration range. The results are compared to previous neutron diffraction results by Zaiss and Steeb, to square-well potential model calculations by Gopala Rao and Satpathy and to a simple segregation model. The segregation model reproduces the features qualitatively. Partial structure factors are assessed by fitting both neutron and X-ray scattering results with reverse Monte-Carlo simulation

  20. Bismuth Telluride and Its Alloys as Materials for Thermoelectric Generation

    Directory of Open Access Journals (Sweden)

    H. Julian Goldsmid

    2014-03-01

    Full Text Available Bismuth telluride and its alloys are widely used as materials for thermoelectric refrigeration. They are also the best materials for use in thermoelectric generators when the temperature of the heat source is moderate. The dimensionless figure of merit, ZT, usually rises with temperature, as long as there is only one type of charge carrier. Eventually, though, minority carrier conduction becomes significant and ZT decreases above a certain temperature. There is also the possibility of chemical decomposition due to the vaporization of tellurium. Here we discuss the likely temperature dependence of the thermoelectric parameters and the means by which the composition may be optimized for applications above room temperature. The results of these theoretical predictions are compared with the observed properties of bismuth telluride-based thermoelements at elevated temperatures. Compositional changes are suggested for materials that are destined for generator modules.

  1. Quantum nernst effect in a bismuth single crystal

    International Nuclear Information System (INIS)

    Matsuo, M.; Endo, A.; Hatano, N.; Nakamura, H.; Shirasaki, R.; Sugihara, K.

    2009-07-01

    We calculate the phonon-drag contribution to the transverse (Nernst) thermoelectric power S yx in a bismuth single crystal subjected to a quantizing magnetic field. The calculated heights of the Nernst peaks originating from the hole Landau levels and their temperature dependence reproduce the right order of magnitude for those of the pronounced magneto-oscillations recently reported by Behnia et al. A striking experimental finding that S yx is much larger than the longitudinal (Seebeck) thermoelectric power S xx can be naturally explained as the effect of the phonon drag, combined with the well-known relation between the longitudinal and the Hall resistivity ρ xx >> |ρ yx | in a semi-metal bismuth. The calculation that includes the contribution of both holes and electrons suggests that some of the hitherto unexplained minor peaks located roughly at the fractional filling of the hole Landau levels are attributable to the electron Landau levels. (author)

  2. In vivo temporal property of GABAergic neural transmission in collateral feed-forward inhibition system of hippocampal-prefrontal pathway.

    Science.gov (United States)

    Takita, Masatoshi; Kuramochi, Masahito; Izaki, Yoshinori; Ohtomi, Michiko

    2007-05-30

    Anatomical evidence suggests that rat CA1 hippocampal afferents collaterally innervate excitatory projecting pyramidal neurons and inhibitory interneurons, creating a disynaptic, feed-forward inhibition microcircuit in the medial prefrontal cortex (mPFC). We investigated the temporal relationship between the frequency of paired synaptic transmission and gamma-aminobutyric acid (GABA)ergic receptor-mediated modulation of the microcircuit in vivo under urethane anesthesia. Local perfusions of a GABAa antagonist (-)-bicuculline into the mPFC via microdialysis resulted in a statistically significant disinhibitory effect on intrinsic GABA action, increasing the first and second mPFC responses following hippocampal paired stimulation at interstimulus intervals of 100-200 ms, but not those at 25-50 ms. This (-)-bicuculline-induced disinhibition was compensated by the GABAa agonist muscimol, which itself did not attenuate the intrinsic oscillation of the local field potentials. The perfusion of a sub-minimal concentration of GABAb agonist (R)-baclofen slightly enhanced the synaptic transmission, regardless of the interstimulus interval. In addition to the tonic control by spontaneous fast-spiking GABAergic neurons, it is clear the sequential transmission of the hippocampal-mPFC pathway can phasically drive the collateral feed-forward inhibition system through activation of a GABAa receptor, bringing an active signal filter to the various types of impulse trains that enter the mPFC from the hippocampus in vivo.

  3. Core-shell in liquid chromatography: application for determining sulphonamides in feed and meat using conventional chromatographic systems

    Directory of Open Access Journals (Sweden)

    Antonio Armentano

    2016-12-01

    Full Text Available A C18 column packed with core-shell particles was used for the chromatographic separation of sulphonamides in feed and meat by a conventional high performance liquid chromatography system coupled with a diode array detector. Two analytical methods, already used in our laboratory, have been modified without any changes in the extraction and clean-up steps and in the liquid chromatography instrumentation. Chromatographic conditions applied on a traditional 5-μm column have been optimized on a column packed with 2.6 μm core-shell particles. A binary mobile phase [acetate buffer solution at pH 4.50 and a mixture of methanol acetonitrile 50: 50 (v/v] was employed in gradient mode at the flow rate of 1.2 mL with an injection volume of 6 μL. These chromatographic conditions allow the separation of 13 sulphonamides with an entire run of 13 minutes. Preliminary studies have been carried out comparing blanks and spiked samples of feed and meat. A good resolution and the absence of interferences were achieved in chromatograms for both matrices. Since no change was made to the sample preparation, the optimized method does not require a complete revalidation and can be used to make routine analysis faster.

  4. BIOFEAT: Biodiesel fuel processor for a vehicle fuel cell auxiliary power unit. Study of the feed system

    Science.gov (United States)

    Sgroi, M.; Bollito, G.; Saracco, G.; Specchia, S.

    An integrated auxiliary power unit (APU) based on a 10 kW e integrated biodiesel fuel processor has been designed and is being developed. Auto-thermal reforming (ATR) and thermal cracking (TC) were considered for converting the fuel into a hydrogen-rich gas suitable for PEM fuel cells. The fuel processor includes also a gas clean-up system that will reduce the carbon monoxide in the primary processor exit gas to below 10 ppm via a new heat-integrated CO clean-up unit, based on the assembly of catalytic heat exchange plates, so as to meet the operational requirements of a PEMFC stack. This article is devoted to the study and selection of the proper feed strategy for the primary fuel processor. Different pre-treatment and feed alternatives (e.g. based on nozzles or simple coils) were devised and tested for the ATR processors, which turned out to be the preferred primary processing route. A nozzle-based strategy was finally selected along with special recommendations about the constituent materials and the operating procedures to be adopted to avoid coking and nozzle corrosion as well as to allow a wide turn down ratio.

  5. Unmanned aerial system laser based measurements of ammonia and methane emissions from animal feeding operations

    Science.gov (United States)

    Shadman, S.; McHale, L.; Miller, T.; Yalin, A.

    2017-12-01

    In the US, 40 Tg of ammonia is emitted every year into the atmosphere via agricultural activities. Ammonia is the third most abundant nitrogen containing species in the atmosphere and it has important impacts on atmospheric chemistry, health, and the environment. Since the atmospheric lifetime of ammonia is a few days, it typically deposits to the ground close to its source. In this study we are developing two laser-based sensors to measure ammonia and methane emissions from concentrated animal feeding operations (CAFOs) with the specific goal of quantifying the dry deposition of ammonia in the first few kilometers downwind of the CAFOs. Since methane is nonreactive and does not undergo dry deposition, its change in concentration with downwind distance is due to dispersion alone. We therefore plan to use methane as a conservative tracer, and will infer the ammonia deposition from the changing (deceasing) ratio of ammonia to methane as a function of downwind position. The laser sensors (ammonia and methane) developed in this study are relatively lightweight (physical structures are made from carbon-fiber. For each sensor, a custom electronics module has been designed to control and power the electro-optic components, as well as to acquire, analyze, and save data (including concentration, temperature, pressure, and GPS time and position). The sensors have been characterized in the lab (Allan variance) and show sensitivities of 1.5 ppb (at 1 Hz) and 20 ppb (at 1 Hz), for ammonia and methane respectively.

  6. The Evaluation of Feed-in Tariff Models for Photovoltaic System in Thailand

    Directory of Open Access Journals (Sweden)

    Sagulpongmalee Kangsadan

    2016-01-01

    Full Text Available Thailand is targeted to reach 6,000 MW of total installed PV capacity by 2036. Feed-in tariff (FIT was one of the most successful PV mechanisms of Thailand for promoting PV generated electricity. The evaluation of the FIT models for PV in Thailand which was designed 3 models such as premium price FIT model (Adder in the first FIT policy to motivate attention on investment in PV power plant. After that used fixed price FIT model for PV ground-mounted and front-end loaded FIT model for solar rooftop. In addition to, Thailand has project-specific tariff design which FIT rates are differentiated tariff payment levels by technology, capacity size, and quality of the resource. As result of FIT policies, the PV installation is 1,287 MW of cumulative capacity in 2014. Furthermore, the financial evaluation of FIT for PV project in Thailand found that Net Present Value (NPV 32.97 million Baht, Internal Rate of Return (IRR 13.22%, payback period 8.86 years and B/C ratio was 1.66 which must be implemented in conjunction with other financial support measures such as low interest loans, tax benefits, etc. The several incentives to promote PV in Thailand especially FIT shown as PV projects are to be profitable and incentives to investors.

  7. Dose reduction using Bismuth protectors in chest computed tomography

    International Nuclear Information System (INIS)

    Anaya, R.

    2012-01-01

    This monography is about the Dose reduction using Bismuth protectors in chest CT. The radiation protection of specific areas is necessary when the tissues or radiosensitive organs are near the path of light beam. The correct use of protection represents a challenge for the radiologist because of the time and materials required. The method used was a prospective investigatio in CHPR (TC service) and the doses was measured with TLD dosimeters. It is important to use these protectors in children hospitals.

  8. Preparation of Bismuth- and Thallium-Based Cuprate Superconductors

    Science.gov (United States)

    1991-10-01

    erage work period (29); early symptoms of thallium - poisoning include hair loss. Safety considerations in handling thallium compounds should include... Thallium -Based Cuprate Superconductors by S. A. Sunshine and T. A. Vanderah Chemistry Division, Research Department Naval Weapons Center, China Lake, CA...Technical Report #2 10/90-9/91 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Preparation of Bismuth- and Thallium -Based Cuprate Suoerconductors NOOO14-91 WX

  9. Modular Lead-Bismuth Fast Reactors in Nuclear Power

    OpenAIRE

    Georgy Toshinsky; Vladimir Petrochenko

    2012-01-01

    On the basis of the unique experience of operating reactors with heavy liquid metal coolant–eutectic lead-bismuth alloy in nuclear submarines, the concept of modular small fast reactors SVBR-100 for civilian nuclear power has been developed and validated. The features of this innovative technology are as follows: a monoblock (integral) design of the reactor with fast neutron spectrum, which can operate using different types of fuel in various fuel cycles including MOX fuel in a self-providing...

  10. Inverter systems for feeding electrical power of fuel cells in the grid; Stromrichtersysteme zur Netzeinspeisung elektrischer Energie aus Brennstoffzellen

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, Malte

    2011-03-04

    Fuel cells represent an important potential alternative to conventional thermal-mechanical- electrical energy transformations due to their highly efficient direct conversion of chemical energy, i.e. hydrogen or natural gas into electrical energy. Inverter systems that feed electrical power from fuel cells into the grid must convert the direct current of the fuel cell into the alternating current of the grid. In addition, these inverters have to adapt the different voltages of the fuel cell system to the grid. Inverter systems for fuel cells can be seen as an own field of research. Only a few results from other fields of research in power electronic circuits in the medium power range - like converters for electrical drives or power supplies - can be applied to inverter systems for fuel cells due to the different technical constraints. In this thesis, different topologies of appropriate inverter systems in the medium power range of 20 kW and higher are analyzed and compared to each other. This study includes transformerless inverters as well as two-stage inverter systems with high frequency transformers (DC/DC converter combined with an inverter). In the beginning, this thesis shows the electrical characteristics of the fuel cell and of the main inverter components like power semiconductors and passive components. In addition, the principles of power semiconductor losses and methods of the semiconductor power loss calculation are shown. This work does not focus on the dimensioning of the passive components like capacitors, chokes and transformers. The main principles of the dimensioning of the passive components are shown but are not analyzed in detail. The summary of the demands of a fuel cell inverter system is followed by the analytical analysis of the different inverter topologies. In addition, the semiconductor loss calculations for the topologies will be derived. To gain practical experience and to verify parts of the theoretical analysis, the converters

  11. Feeding systems and periods of finishing on the body and carcass measurements of lambs slaughtered in the South Central region of the Paraná

    Directory of Open Access Journals (Sweden)

    Odilei Rogerio Prado

    2013-12-01

    Full Text Available The objective was to determine the effect of feeding system and time of the year on the in vivo and carcass characteristics of lambs slaughtered at the Cooperative Cooperaliança (Guarapuava-PR. Ile de France lambs and their crossbreds (n=253 were evaluated at slaughter with 39.6 kg of mean body weight in three periods between April and September 2010. Four feeding systems for finishing of lambs were identified: a grazing dams + lambs with creep-feeding for lambs (n=67; b no supplemented, grazing dams + lambs (n=47; c grazing dams + lambs, all of them supplemented with concentrate (n=30; d irregular system of feeding (n=109. Measurements on lambs were carried out in vivo and by ultrasound before slaughter and the carcass measurements were taken before and after chilling. Lambs delivered for slaughter between the end of August and the first half of September showed better results (p <0.05 for muscle development, dressing percentage and fat thickness in the carcass compared to that slaughtered in April and June. It was concluded that the feeding system with supplementation for dams and sucking lambs resulted in better characteristics for body and carcass measurements compared to other systems.

  12. The capability of alfalfa grazing- and concentrate-based feeding systems to produce homogeneous carcass quality in light lambs over time

    Energy Technology Data Exchange (ETDEWEB)

    Ripoll, G.; Alvarez-Rodriguez, J.; Sanz, A.; Joy, M.

    2014-06-01

    The effects of grazing on the carcasses and meat of light lambs are unclear, mainly due to variations in weather conditions and pasture production, which affect the growth of lambs and the quality of their carcasses. The aim of this study was to evaluate the effect of feeding systems, which varied in intensification due to the use of concentrate, on the growth and carcass traits of light lambs and the capability of these feeding systems to produce homogeneous lamb carcasses over the course of several years. The average daily weight gain of grazing lambs, but not lambs fed indoors was affected over years. The colour of the Rectus abdominis muscle and the amount of fat were more variable in grazing lambs (from 2.7 to 6.3) than indoor lambs (from 4.5 to 5.1). Grazing feeding systems without concentrate supplementation are more dependent than indoor feeding systems on the year. This climatologic dependence could lead to slaughter of older grazing lambs (77 days) to achieve the target slaughter weight when temperatures are low or the rainfall great. All feeding systems evaluated produced light lambs carcasses with a conformation score from O to R that is required by the market. Even the potential change in fat colour found in both grazing treatments was not enough to change the subjective evaluation of fat colour. (Author)

  13. Application of molecular microbial ecology tools to facilitate the development of feeding systems for ruminant livestock that reduce greenhouse gas emissions

    International Nuclear Information System (INIS)

    McCrabb, G.J.; Fernandez-Rivera, S.; McSweeney, C.S.; Denman, S.; Mitsumori, M.; Makkar, H.P.S.

    2005-01-01

    Ruminant livestock populations in developing countries are increasing in response to increasing demand for meat and milk. These animals are a major global source of methane, a greenhouse gas produced during the degradation of organic matter by micro-organisms in the foregut of ruminant livestock. Chemical inhibition of methanogenic micro-organisms has been reported; however, associated improvements in feed digestion and livestock productivity have not been consistently demonstrated. Gene-based technologies have the potential to contribute new knowledge of the rumen microbial populations involved in these processes, which will assist in identifying feeding practices that lead to methane abatement and improved livestock productivity. For small-scale farmers, feeding interventions that achieve greenhouse gas abatement need also to be associated with improved feed conversion efficiency and enterprise profitability. During the adoption of methane abatement technologies, other regionally important issues such as poverty, food security, sustainable agriculture production systems and environmental management must also be addressed. (author)

  14. Shape-controlled solvothermal synthesis of bismuth subcarbonate nanomaterials

    International Nuclear Information System (INIS)

    Cheng Gang; Yang Hanmin; Rong Kaifeng; Lu Zhong; Yu Xianglin; Chen Rong

    2010-01-01

    Much effort has been devoted to the synthesis of novel nanostructured materials because of their unique properties and potential applications. Bismuth subcarbonate ((BiO) 2 CO 3 ) is one of commonly used antibacterial agents against Helicobacter pylori (H. pylori). Different (BiO) 2 CO 3 nanostructures such as cube-like nanoparticles, nanobars and nanoplates, were fabricated from bismuth nitrate via a simple solvothermal method. The nanostructures were characterized by powder X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). It was found that the solvents and precursors have an influence on the morphologies of (BiO) 2 CO 3 nanostructures. The possible formation mechanism of different (BiO) 2 CO 3 nanostructures fabricated under different conditions was also discussed. - Graphical abstract: Different bismuth subcarbonate ((BiO) 2 CO 3 ) nanostructures were successfully synthesized by a simple solvothermal method. It was found that the solvents and precursors have an influence on the morphologies of (BiO) 2 CO 3 nanostructures.

  15. Bismuth Oxysulfide and Its Polymer Nanocomposites for Efficient Purification

    Directory of Open Access Journals (Sweden)

    Yidong Luo

    2018-03-01

    Full Text Available The danger of toxic organic pollutants in both aquatic and air environments calls for high-efficiency purification material. Herein, layered bismuth copper oxychalcogenides, BiCuSO, nanosheets of high photocatalytic activity were introduced to the PVDF (Polyvinylidene Fluoride. The fibrous membranes provide an easy, efficient, and recyclable way to purify organic pollutant. The physical and photophysical properties of the BiCuSO and its polymer composite were characterized by scanning electron microscopy (SEM, X-ray diffraction (XRD, ultraviolet-visible diffuse reflection spectroscopy (DRS, X-ray photoelectron spectroscopy (XPS, electron spin resonance (EPR. Photocatalysis of Congo Red reveals that the BiCuSO/PVDF shows a superior photocatalytic activity of a 55% degradation rate in 70 min at visible light. The high photocatalytic activity is attributed to the exposed active {101} facets and the triple vacant associates V B i ‴ V O • • V B i ‴ . By engineering the intrinsic defects on the surface of bismuth oxysulfide, high solar-driven photocatalytic activity can be approached. The successful fabrication of the bismuth oxysulfide and its polymer nanocomposites provides an easy and general approach for high-performance purification materials for various applications.

  16. Theoretical study of bismuth-doped cadmium telluride

    Science.gov (United States)

    Menendez-Proupin, E.; Rios-Gonzalez, J. A.; Pena, J. L.

    Cadmium telluride heavily doped with bismuth has been proposed as an absorber with an intermediate band for solar cells. Increase in the photocurrent has been shown recently, although the overall cell efficiency has not improved. In this work, we study the electronic structure and the formation energies of the defects associated to bismuth impurities. We have performed electronic structure calculations within generalized density functional theory, using the exchange-correlation functional HSE(w) , where the range-separation parameter w has been tuned to reproduce the CdTe bandgap. Improving upon previous reports, we have included the spin-orbit interaction, which modifies the structure of the valence band and the energy levels of bismuth. We have found that interstitial Bi (Bii) tends to occupy Cd vacancies, cadmium substitution (BiCd) creates single donor level, while tellurium substitution (BiTe) is a shallow single acceptor. We investigate the interaction between these point defects and how can they be combined to create a partially filled intermediate band. Supported by FONDECYT Grant 1130437, CONACYT-SENER SUSTENTABILIDAD ENERGETICA/project CeMIE-Sol PY-207450/25 and PY-207450/26. JARG acknowledges CONACYT fellowship for research visit. Powered@NLHPC (ECM-02).

  17. Superconductivity in the high-pressure phase of bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Philip A.C.; Semeniuk, Konstantin; Grosche, F. Malte [Department of Physics, Cavendish Laboratory, University of Cambridge (United Kingdom)

    2016-07-01

    At pressures above 27 kbar, elemental bismuth adopts a highly unusual incommensurate host-guest structure. This structure combines two distinct, interpenetrating crystal lattices and consequently lacks discrete translational symmetry. Although similar high pressure structures have been observed in other elements, their electronic properties have not been investigated in detail. The moderate pressure required to induce the host-guest phase in bismuth presents a favourable opportunity for comprehensive electrical transport studies. The high-pressure host-guest phase of bismuth, termed Bi-III, is known to be superconducting with a transition temperature of around 7 K, but the details of its superconducting and normal state properties are comparatively little explored. We report resistivity and magnetisation measurements in the Bi-III phase in fields up to 9 T and temperatures down to 120 mK. We find evidence for a strikingly high critical field and an unusual temperature dependence of the resistivity above the superconducting transition. We discuss our findings in the context of theoretical descriptions of host-guest materials.

  18. Soluble Lead and Bismuth Chalcogenidometallates: Versatile Solders for Thermoelectric Materials

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [Department; Son, Jae Sung [Department; School; Dolzhnikov, Dmitriy S. [Department; Filatov, Alexander S. [Department; Hazarika, Abhijit [Department; Wang, Yuanyuan [Department; Hudson, Margaret H. [Department; Sun, Cheng-Jun [Advanced; Chattopadhyay, Soma [Physical; Talapin, Dmitri V. [Department; Center

    2017-07-27

    Here we report the syntheses of largely unexplored lead and bismuth chalcogenidometallates in the solution phase. Using N2H4 as the solvent, new compounds such as K6Pb3Te6·7N2H4 were obtained. These soluble molecular compounds underwent cation exchange processes using resin chemistry, replacing Na+ or K+ by decomposable N2H5+ or tetraethylammonium cations. They also transformed into stoichiometric lead and bismuth chalcogenide nanomaterials with the addition of metal salts. Such a versatile chemistry led to a variety of composition-matched solders to join lead and bismuth chalcogenides and tune their charge transport properties at the grain boundaries. Solution-processed thin films composed of Bi0.5Sb1.5Te3 microparticles soldered by (N2H5)6Bi0.5Sb1.5Te6 exhibited thermoelectric power factors (~28 μW/cm K2) comparable to those in vacuum-deposited Bi0.5Sb1.5Te3 films. The soldering effect can also be integrated with attractive fabrication techniques for thermoelectric modules, such as screen printing, suggesting the potential of these solders in the rational design of printable and moldable thermoelectrics.

  19. Study of barium bismuth titanate prepared by mechanochemical synthesis

    Directory of Open Access Journals (Sweden)

    Lazarević Z.Ž.

    2009-01-01

    Full Text Available Barium-bismuth titanate, BaBi4Ti4O15 (BBT, a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of barium titanate and bismuth titanate obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. The reaction mechanism of BaBi4Ti4O15 and the preparation and characteristics of BBT ceramic powders were studied using XRD, Raman spectroscopy, particle analysis and SEM. The Bi-layered perovskite structure of BaBi4Ti4O15 ceramic forms at 1100 °C for 4 h without a pre-calcination step. The microstructure of BaBi4Ti4O15 exhibits plate-like grains typical for the Bi-layered structured material and spherical and polygonal grains. The Ba2+ addition leads to changes in the microstructure development, particularly in the change of the average grain size.

  20. Atomic Layer Deposition of Bismuth Vanadates for Solar Energy Materials.

    Science.gov (United States)

    Stefik, Morgan

    2016-07-07

    The fabrication of porous nanocomposites is key to the advancement of energy conversion and storage devices that interface with electrolytes. Bismuth vanadate, BiVO4 , is a promising oxide for solar water splitting where the controlled fabrication of BiVO4 layers within porous, conducting scaffolds has remained a challenge. Here, the atomic layer deposition of bismuth vanadates is reported from BiPh3 , vanadium(V) oxytriisopropoxide, and water. The resulting films have tunable stoichiometry and may be crystallized to form the photoactive scheelite structure of BiVO4 . A selective etching process was used with vanadium-rich depositions to enable the synthesis of phase-pure BiVO4 after spinodal decomposition. BiVO4 thin films were measured for photoelectrochemical performance under AM 1.5 illumination. The average photocurrents were 1.17 mA cm(-2) at 1.23 V versus the reversible hydrogen electrode using a hole-scavenging sulfite electrolyte. The capability to deposit conformal bismuth vanadates will enable a new generation of nanocomposite architectures for solar water splitting. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Quality characteristics, chemical composition, and sensory properties of butter from cows on pasture versus indoor feeding systems.

    Science.gov (United States)

    O'Callaghan, Tom F; Faulkner, Hope; McAuliffe, Stephen; O'Sullivan, Maurice G; Hennessy, Deirdre; Dillon, Pat; Kilcawley, Kieran N; Stanton, Catherine; Ross, R Paul

    2016-12-01

    This study evaluated the effects of 3 widely practiced cow feeding systems in the United States, Europe, and Southern Hemisphere regions on the characteristics, quality, and consumer perception of sweet cream butter. Fifty-four multiparous and primiparous Friesian cows were divided into 3 groups (n=18) for an entire lactation. Group 1 was housed indoors and fed a total mixed ration diet (TMR) of grass silage, maize silage, and concentrates; group 2 was maintained outdoors on perennial ryegrass-only pasture (GRS); and group 3 was maintained outdoors on a perennial ryegrass/white clover pasture (CLV). Mid-lactation butter was manufactured in triplicate with milk from each group in June 2015 (137±7d in milk) and was analyzed over a 6-mo storage period at 5°C for textural and thermal properties, fatty acid composition, sensory properties, and volatile compounds. The nutritional value of butters was improved by pasture feeding, and butter from pasture-fed cows had significantly lower thrombogenicity index scores compared with butters from TMR-fed cows. In line with these results, pasture-derived milks (GRS and CLV) produced butter with significantly higher concentrations of conjugated linoleic acid (cis-9,trans-11) and trans-β-carotene than TMR butter. Alterations in the fatty acid composition of butter contributed to significant differences in textural and thermal properties of the butters. Total mixed ration-derived butters had significantly higher hardness scores at room temperature than those of GRS and CLV. Onset of crystallization for TMR butters also occurred at significantly higher temperatures compared with pasture butters. Volatile analysis of butter by gas chromatography-mass spectrometry identified 25 compounds present in each of the butters, 5 of which differed significantly based on feeding system, including acetone, 2-butanone, 1-pentenol, toluene, and β-pinene. Toluene was very significantly correlated with pasture-derived butter. Sensory analysis

  2. FEED FORWARD LINEAR QUADRATIC CONTROLLER DESIGN FOR AN INDUSTRIAL ELECTRO HYDRAULIC ACTUATOR SYSTEM WITH SERVO VALVE

    OpenAIRE

    Micheal, J.; Rahmat, M.F.; Wahab, N. Abdul; Lai, W.K.

    2013-01-01

    Electro-hydraulic servo actuator (EHA) system consists of several dynamic parts which are widely used in motion control application. These dynamic parts need to be controlled to determine direction of the motion. In this research paper, system identification technique is used for system modeling and the model of the system is estimated by using parameter estimation technique. This process started with collection of input and output data from experimental procedure. The data collected is used ...

  3. Effects of 90-Day Feeding of Transgenic Maize BT799 on the Reproductive System in Male Wistar Rats

    Directory of Open Access Journals (Sweden)

    Qian-ying Guo

    2015-12-01

    Full Text Available BT799 is a genetically modified (GM maize plant that expresses the Cry1Ac gene from Bacillus thuringiensis (Bt. The Cry1Ac gene was introduced into maize line Zhen58 to encode the Bt crystal protein and thus produce insect-resistant maize BT799. Expression of Bt protein in planta confers resistance to Lepidopteran pests and corn rootworms. The present study was designed to investigate any potential effects of BT799 on the reproductive system of male rats and evaluate the nutritional value of diets containing BT799 maize grain in a 90-day subchronic rodent feeding study. Male Wistar rats were fed with diets containing BT799 maize flours or made from its near isogenic control (Zhen58 at a concentration of 84.7%, nutritionally equal to the standard AIN-93G diet. Another blank control group of male rats were treated with commercial AIN-93G diet. No significant differences in body weight, hematology and serum chemistry results were observed between rats fed with the diets containing transgenic BT799, Zhen58 and the control in this 13-week feeding study. Results of serum hormone levels, sperm parameters and relative organ/body weights indicated no treatment-related side effects on the reproductive system of male rats. In addition, no diet-related changes were found in necropsy and histopathology examinations. Based on results of the current study, we did not find any differences in the parameters tested in our study of the reproductive system of male rats between BT799 and Zhen58 or the control.

  4. Application of fuzzy logic control system for reactor feed-water control

    International Nuclear Information System (INIS)

    Iijima, T.; Nakajima, Y.

    1994-01-01

    The successful actual application of a fuzzy logic control system to the a nuclear Fugen nuclear power reactor is described. Fugen is a heavy-water moderated, light-water cooled reactor. The introduction of fuzzy logic control system has enabled operators to control the steam drum water level more effectively in comparison to a conventional proportional-integral (PI) control system

  5. Study on corrosion test techniques in lead bismuth eutectic flow. Joint research report in JFY2002

    International Nuclear Information System (INIS)

    Takahashi, Minoru; Sekimoto, Hiroshi

    2003-03-01

    The evaluation of corrosion behaviors of core and structural materials in lead bismuth eutectic is one of the key issues for the utilization of lead bismuth eutectic as a coolant of the primary loops of lead bismuth cooled fast breeder reactors (FBRs) and the intermediate heat transport media of new-type steam generators of the sodium cooled FBRs. The purpose of the present study is to establish corrosion test techniques in lead bismuth eutectic flow. The techniques of steel corrosion test and oxygen control in flowing lead bismuth eutectic, and the technologies of a lead bismuth flow test at high temperature and high velocity were developed through corrosion test using a lead bismuth flow test loop of the Tokyo Institute of Technology in JFY2002. The major results are summarized as follows: (1) Techniques of fabrication, mount and rinse of corrosion specimens, measurement method of weight loss, and SEM/EDX analysis method have been established through lead bismuth corrosion test. (2) Weight losses were measured, corrosion and lead bismuth-adhered layers and eroded parts were observed in two 1000 hr-corrosion tests, and the results were compared with each other for twelve existing steels including ODS, F82H and SUH-3. (3) An oxygen sensor made of zirconia electrolyte structurally resistant to thermal stress and thermal shock was developed and tested in the lead bismuth flow loop. Good performance has been obtained. (4) An oxygen control method by injecting argon and hydrogen mixture gas containing steam into lead bismuth was applied to the lead bismuth flow loop, and technical issues for the development of the oxygen control method were extracted. (5) Technical measures for freezing and leakage of lead bismuth in the flow loop were accumulated. (6) Technical measures for flow rate decrease/blockage due to precipitation of oxide and corrosion products in a low temperature section of the lead bismuth flow loop were accumulated. (7) Electromagnetic flow meters with MI

  6. A guide to the influence of bismuth on lead/acid battery performance

    Science.gov (United States)

    Koop, M. J.; Rand, D. A. J.; Culpin, B.

    A review is given of the literature that deals with the influence of bismuth on the microstructure, oxygen/hydrogen evolution kinetics and anodic corrosion of lead and lead alloys with regard to their performance in lead/acid batteries. Analysis shows that there is considerable disagreement as to the effect of bismuth on lead microstructure. For example, the various investigators report an increase, a decrease, or negligible change in grain size. In general, it is concluded that the oxygen overpotential on PbO 2 is lowered in the presence of bismuth. The effect is enhanced as the bismuth content is increased. It is postulated that the behaviour results from the formation of a mixed oxide, PbO 2·BiO x. By contrast, cathodic hydrogen evolution is reported widely to be largely unaffected by bismuth. Nevertheless, there is evidence that the reaction is particularly sensitive to the surface characteristics of electrodes and that these features can induce either a suppression or an enhancement of the hydrogen-gassing rate. Many studies have shown that bismuth accelerates the anodic corrosion of lead alloys, especially at high concentrations of bismuth. At 0.1 wt.% bismuth and below, the effect on the corrosion rate is negligible. The authors of this discussion are of the opinion that much of the conflicting evidence in the areas reported is caused by spurious differences in grain structure that are introduced by variations in sample preparation, rather than by the action of bismuth itself. In battery-related tests, bismuth has usually been found to exert little influence on performance, but there is some suggestion that cycle life is increased. The present body of knowledge is insufficient to confirm the correctness of any currently specified maximum level for bismuth with respect to a given battery design.

  7. Subsurface intake systems: Green choice for improving feed water quality at SWRO desalination plants, Jeddah, Saudi Arabia

    KAUST Repository

    Dehwah, Abdullah

    2015-10-25

    An investigation of three seawater reverse osmosis facilities located along the shoreline of the Red Sea of Saudi Arabia that use well intake systems showed that the pumping-induced flow of raw seawater through a coastal aquifer significantly improves feed water quality. A comparison between the surface seawater and the discharge from the wells shows that turbidity, algae, bacteria, total organic carbon, most fractions of natural organic matter (NOM), and particulate and colloidal transparent exopolymer particles (TEP) have significant reductions in concentration. Nearly all of the algae, up to 99% of the bacteria, between 84 and 100% of the biopolymer fraction of NOM, and a high percentage of the TEP were removed during transport. The data suggest that the flowpath length and hydraulic retention time in the aquifer play the most important roles in removal of the organic matter. Since the collective concentrations of bacteria, biopolymers, and TEP in the intake seawater play important roles in the biofouling of SWRO membranes, the observed reductions suggest that the desalination facilities that use well intakes systems will have a potentially lower fouling rate compared to open-ocean intake systems. Furthermore, well intake system intakes also reduce the need for chemical usage during complex pretreatment systems required for operation of SWRO facilities using open-ocean intakes and reduce environmental impacts.

  8. Subsurface intake systems: Green choice for improving feed water quality at SWRO desalination plants, Jeddah, Saudi Arabia.

    Science.gov (United States)

    Dehwah, Abdullah H A; Missimer, Thomas M

    2016-01-01

    An investigation of three seawater reverse osmosis facilities located along the shoreline of the Red Sea of Saudi Arabia that use well intake systems showed that the pumping-induced flow of raw seawater through a coastal aquifer significantly improves feed water quality. A comparison between the surface seawater and the discharge from the wells shows that turbidity, algae, bacteria, total organic carbon, most fractions of natural organic matter (NOM), and particulate and colloidal transparent exopolymer particles (TEP) have significant reductions in concentration. Nearly all of the algae, up to 99% of the bacteria, between 84 and 100% of the biopolymer fraction of NOM, and a high percentage of the TEP were removed during transport. The data suggest that the flowpath length and hydraulic retention time in the aquifer play the most important roles in removal of the organic matter. Since the collective concentrations of bacteria, biopolymers, and TEP in the intake seawater play important roles in the biofouling of SWRO membranes, the observed reductions suggest that the desalination facilities that use well intakes systems will have a potentially lower fouling rate compared to open-ocean intake systems. Furthermore, well intake system intakes also reduce the need for chemical usage during complex pretreatment systems required for operation of SWRO facilities using open-ocean intakes and reduce environmental impacts. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Properties of lead-bismuth coolant and perspectives of non-electric applications of lead-bismuth reactor

    International Nuclear Information System (INIS)

    Martynov, P.N.; Ivanov, K.D.

    1998-01-01

    Key physical and chemical properties of lead-bismuth eutectic alloy are reviewed. Based on the low chemical activity of the alloy to other work media, a new concept of direct contact heat exchangers is proposed. A series of experiments were performed to validate the concept, using water, model salt solutions of sodium chloride, and oil. Key experimental results are summarized in the report. (author)

  10. Survival and growth of newly transformed Lampsilis cardium and Lampsilis siliquoidea in a flow-through, continuous feeding test system

    Science.gov (United States)

    Meinertz, Jeffery R.; Schreier, Theresa M.; Hess, Karina R.; Bartsch, Michelle

    2011-01-01

    A test system was evaluated for assessing chronic toxicity of waterborne chemicals with early life stage mussels. To determine if the test system could result in ≥80% survival in a control (unexposed) group, fat mucket mussels (Lampsilis siliquoidea Barnes, 1823) and plain pocketbook mussels (L. cardium Rafinesque, 1820) 1 day post transformation were stocked into test chambers (250 mL beakers, water volume, 200 mL, 21 °C, 40 mussels of 1 species per chamber) within a test system constructed for conducting chronic, continuous exposure, flow-through toxicity tests. The test system contained 60 chambers containing silica sand, 30 chambers with L. siliquoidea, and 30 with L. cardium. Each chamber in the continuous feeding system received 1 of 6 food types prepared with concentrated algal products. After 28 days, mussels were harvested from chambers to assess survival and growth. For L. siliquoidea, mean survival ranged from 34 to 80% and mean shell length ranged from 464 to 643 µm. For L. cardium, mean survival ranged from 12 to 66% and mean shell length ranged from 437 to 612 µm. The maximum mean growth rate for L. siliquoidea was 12.7 µm/d and for L. cardium was 11.8 µm/d. When offered a continuous diet of Nannochloropsis, Tetraselmis, and Chlorella for 28 days in the test system, the survival of 1 day post transformation L. siliquoidea was 80%. The test system can be easily enhanced with a pumping system continuously delivering test chemical to the test system's flow stream allowing for chronic toxicity tests with 1 day post transformation mussels.

  11. Possible involvement of serotonin 5-HT2 receptor in the regulation of feeding behavior through the histaminergic system.

    Science.gov (United States)

    Murotani, Tomotaka; Ishizuka, Tomoko; Isogawa, Yuka; Karashima, Michitaka; Yamatodani, Atsushi

    2011-01-01

    The central histaminergic system has been proven to be involved in several physiological functions including feeding behavior. Some atypical antipsychotics like risperidone and aripiprazole are known to affect feeding behavior and to antagonize the serotonin (5-HT) receptor subtypes. To examine the possible neural relationship between the serotonergic and histaminergic systems in the anorectic effect of the antipsychotics, we studied the effect of a single administration of these drugs on food intake and hypothalamic histamine release in mice using in vivo microdialysis. Single injection of risperidone (0.5mg/kg, i.p.) or aripiprazole (1mg/kg, i.p.), which have binding affinities to 5-HT(1A, 2A, 2B) and (2C) receptors decreased food intake in C57BL/6N mice with concomitant increase of hypothalamic histamine release. However, a selective D(2)-antagonist, haloperidol (0.5mg/kg, i.p.), did not have effects on food intake or histamine release. Furthermore, in histamine H(1) receptor-deficient mice, there was no reduction of food intake induced by atypical antipsychotics, although histamine release was increased. Moreover, selective 5-HT(2A)-antagonists, volinanserin (0.5, 1mg/kg, i.p.) and ketanserin (5, 10mg/kg, i.p.), significantly increased histamine release and 5-HT(2B/2C) -antagonist, SB206553 (2.5, 5mg/kg, i.p.), slightly increased it. On the contrary, 5-HT(1A) -selective antagonist, WAY100635 (1, 2mg/kg), did not affect the histaminergic tone. These findings suggest that serotonin tonically inhibits histamine release via 5-HT(2) receptors and that antipsychotics enhance the release of hypothalamic histamine by blockade of 5-HT(2) receptors resulting in anorexia via the H(1) receptor. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. A bismuth germanate-shielded mercuric iodide X-ray detector for space applications

    Science.gov (United States)

    Vallerga, J. V.; Ricker, G. R.; Schnepple, W. S.; Ortale, C.

    1982-01-01

    The development of HgI2 for solid state X-ray detector applications over the past decade was carried out in connection with the ability of the crystal to operate as a detector at room temperature. In order to achieve the lowest background possible for HgI2 detectors in a space-like environment (balloon and/or satellite altitudes), attention was given to the design of a shielding system which actively vetoes nonaperture events such as gamma rays and charged particles that can mimic signal X-rays by partial deposition of energy in the main detector. The detector system consists of two HgI2 detectors mounted back to back and operated in anticoincidence. The two detectors are placed inside a bismuth germanate scintillating shield along with two hybrid charge-sensitive preamps. Monte Carlo simulations of detector performance are discussed.

  13. Infrared spectra of U.S. automobile original finishes (1998-2000). IX. identification of bismuth oxychloride and silver/white mica pearlescent pigments using extended range FT-IR spectroscopy, XRF spectrometry, and SEM/EDS analysis.

    Science.gov (United States)

    Suzuki, Edward M

    2014-09-01

    Bismuth oxychloride (BiOCl) was the first viable synthetic pearl pigment developed 50 years ago. It was only used for a limited time period in automotive paint (model years 1998-2000), serving to produce luster for a single Chrysler black metallic color. Identification of this pigment in an unknown automotive paint can thus facilitate determination of the vehicle of origin. Bismuth oxychloride imparts effects similar to those produced by silver/white mica pearlescent pigments, and such a pigment was used together with bismuth oxychloride in at least one original equipment manufacturer (OEM) basecoat. Silver/white micas are now used primarily in white pearl tricoat systems. This article describes the identification of bismuth oxychloride and silver/white mica pearlescent pigments in automotive finishes using FT-IR spectroscopy, X-ray fluorescence (XRF) spectrometry, and SEM/EDS analysis. Data for some cadmium pigments, which were used in automotive paint several decades ago, are also presented as they produce infrared absorptions similar to that of bismuth oxychloride. © 2014 American Academy of Forensic Sciences.

  14. Analysis of a feasible trigeneration system taking solar energy and biomass as co-feeds

    International Nuclear Information System (INIS)

    Zhang, Xiaofeng; Li, Hongqiang; Liu, Lifang; Zeng, Rong; Zhang, Guoqiang

    2016-01-01

    Highlights: • A feasible trigeneration system is proposed to generate power, heating and cooling. • The steam for biomass gasification process is provided by solar energy. • The thermodynamic properties of the proposed system are investigated. • Effects of ER and SBR on gasification process is presented. • The sensitivity of the economic performance of trigeneration system is evaluated. - Abstract: The trigeneration systems are widely used owing to high efficiency, low greenhouse gas emission and high reliability. Especially, those trigeneration systems taking renewable energy as primary input are paid more and more attention. This paper presents a feasible trigeneration system, which realizes biomass and solar energy integrating effective utilization according to energy cascade utilization and energy level upgrading of chemical reaction principle. In the proposed system, the solar energy with mid-and-low temperature converted to the chemical energy of bio-gas through gasification process, then the bio-gas will be taken as the fuel for internal combustion engine (ICE) to generate electricity. The jacket water as a byproduct generated from ICE is utilized in a liquid desiccant unit for providing desiccant capacity. The flue gas is transported into an absorption chiller and heat exchanger consequently, supplying chilled water and domestic hot water. The thermodynamic performance of the trigeneration system was investigated by the help of Aspen plus. The results indicate that the overall energy efficiency and the electrical efficiency of the proposed system in case study are 77.4% and 17.8%, respectively. The introduction of solar energy decreases the consumption of biomass, and the solar thermal energy input fraction is 8.6%. In addition, the primary energy saving ratio and annual total cost saving ratio compared with the separated generation system are 16.7% and 25.9%, respectively.

  15. The effect of feeding bull Bali cattle kept in extensive husbandry system with concentrates contained gliricidia sepium leaf meal and banana strach tuber meal on their feed consumption and dried organic matter digestability

    Science.gov (United States)

    Fattah, S.; Sobang, Y. U. L.; Samba, F. D.; Hartati, E.; Kapa, M. M. J.; Henuk, Y. L.

    2018-02-01

    This study aimed to evaluate the effect of feeding bull Bali Cattle kept in extensive husbnadry system with concentrates contained gliricidia sepium leaf meal and banana strach tuber meal in their feed consumptions and dried organic matter digestibility. Three bull Bali cattle aged 1 - 2 years old with an initial body weight of 135.5 kg - 168.0 kg were used in this study. The three treatments used were T0 = local feeds (consisted of Leucaena leucocephala, Acasia leochophloea, and Ficus sp. leaves as commonly used by local farmers); T1 = T0 + 1 kg concentrate (contained banana strach tuber meal + gliricidia sepium leaf meal); T2 = T1 +2 kg concentrate (contained banana strach tuber meal + gliricidia sepium leaf meal). The results showed that the dry matter intake were: 2.40, 3.52, and 4.14; organic matter intake were: 2.17, 3.32, and 3.62; dry matter digestible was 64.63%, 72.45%, 77.28% and organic matter digestible was 66.79%, 74.66%, 79.33% for T0, T1, and T2, respectively. There was no effect (P>0.05) of treatments on the three parameters observed on bull Bali cattle kept in extensive husbandry system and fed with concentrates contained leaf gliricidia sepium meal and banana starch tuber meal.

  16. Proposed sub-criticality level for an 80 MWTHd-bismuth-cooled Ads

    International Nuclear Information System (INIS)

    Mansani, L.; Monti, R.; Neuhold, P.

    2003-01-01

    The degree of operational sub-criticality of an Accelerator-driven System (ADS) on the one hand directly affects key accelerator system parameters, such as the proton beam current required to sustain the selected rated power level and, on the other, the likelihood of approaching or attaining criticality under abnormal or accident conditions. Then, if in all such conditions the safety goal is pursued to design the sub-critical core so that it stays away from criticality with adequate margin, the required operational sub-criticality level must be determined by a properly balanced approach between excessively demanding accelerator system performances and risk of accidental criticality. The approach must necessarily include evaluation and appropriate combination of the relevant reactivity effects (e.g. from system cool-down, postulated accident scenarios, geometrical variations) and proper consideration of specific design features (such as, for instance, the absence of safety rods, intended as neutron absorbing devices having a role equivalent to the shutdown rods in critical reactors). The paper presents a possible approach to the determination of the operational sub-criticality level of an 80 MWth Lead-Bismuth-cooled pool type ADS, initially conceived and developed by a team of Italian Organisations led by Ansaldo, with funding from the Ministry of University and Scientific and Technological Research, and currently in the process of being assessed, versus a gas-cooled concept, in the frame of a contract with the Commission of the European Communities. After a brief description of the Lead-Bismuth-cooled ADS concept relevant features and of the key safety goals in terms of required sub-criticality margin, the evaluated reactivity effects are presented, a method to combine them is discussed and a proposed operational sub-criticality level is derived. (author)

  17. NCDC feed of Global Telecommunication System (GTS) marine observations in International Maritime Meteorological Archive (IMMA) Format

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data contained here are surface marine observations from many different sources via the NCDC Global Telecommunication System (GTS) Marine in International...

  18. Process analysis of a liquid-feed direct methanol fuel cell system

    Science.gov (United States)

    Andrian, Stefanie v.; Meusinger, Josefin

    Recently, a greatly increasing interest in solid polymer electrolyte fuel cells (PEFC) for a range of applications has been observed. The direct methanol fuel cell (DMFC) based on a PEFC uses methanol directly for electric power generation and promises technical advantages, for example, for power trains. This study analyses the interaction between a DMFC stack fed with a liquid aqueous methanol solution and the peripheral system equipment. A simulation model of a DMFC system for mobile applications (from methanol to net electricity) is presented to calculate system efficiencies on the basis of thermodynamic engineering calculations. Based on the simulation calculations, useful operating requirements can be specified. To optimise the performance of DMFC systems, it is necessary to consider the operational characteristics of all the components required in the system. There are worldwide activities to improve the performance of a DMFC stack, which depends on numerous operating parameters. But it is not sufficient to optimise only the current/potential curves of the fuel cell without taking all the consequences for the system into consideration. The results of the computer simulation presented here emphasise the difficulties in improving fuel cell performance without decreasing system efficiency and describes the consequences for the system's operation conditions. Priorities are additionally set concerning the heat management of the fuel cell stack. In the case of liquid fuel supply, the water crossover through the membrane and the ensuing vapourisation at the cathode side impairs the thermal balance. Key operating parameters, which influence these effects, are pressure, temperature, air flow and methanol permeation rate.

  19. Selective oxidation of propylene to acrolein by silica-supported bismuth molybdate catalysts

    DEFF Research Database (Denmark)

    Duc, Duc Truong; Ha, Hanh Nguyen; Fehrmann, Rasmus

    2011-01-01

    Silica-supported bismuth molybdate catalysts have been prepared by impregnation, structurally characterized and examined as improved catalysts for the selective oxidation of propylene to acrolein. Catalysts with a wide range of loadings (from 10 to 90 wt%) of beta bismuth molybdate (β-Bi2Mo2O9...

  20. A first principle study on electronic property of bismuth nano tubes

    International Nuclear Information System (INIS)

    Su Changrong; Li Jiaming

    2002-01-01

    A first principle molecular dynamics with density functional theory and ultra-soft pseudopotential has been performed on the bismuth nano tubes. The strain energies are found to follow the classical 1/R 2 strain law. The bismuth nano tubes are expected as semi-conductor with the band gaps around 0.7-0.8 eV

  1. Effect of O-vacancies on magnetic properties of bismuth ferrite nanoparticles by solution evaporation method

    International Nuclear Information System (INIS)

    Afzal, A.M.; Umair, M.; Dastgeer, G.; Rizwan, M.; Yaqoob, M.Z.; Rashid, R.; Munir, H.S.

    2016-01-01

    Bismuth ferrite is a multiferroic material which shows high magnetization and polarization at room temperature. In present work, the effect of Oxygen (O) vacancies on magnetic properties of bismuth ferrite nanoparticles is studied. Bismuth ferrite nanoparticles (BiFeO 3 ) were synthesized by solution evaporation method (SEM) at room temperature. The sample was annealed under two different atmospheres such as in air and oxygen, to check the effect of O-vacancies on magnetic properties. The average crystallite size of Bismuth ferrite nanoparticles (NPs) as calculated by X-ray diffraction (XRD) falls in the range of 23–32 nm and 26–39 nm for the case of air and oxygen respectively. The crystallite size of bismuth ferrite nanoparticles increases as the temperature was varied from 450 °C to 650 °C. Further the influence of annealing temperature on the magnetic properties of the bismuth ferrite nanoparticles was also observed. It was concluded that the magnetic properties of Bismuth ferrite nanoparticles are directly interconnected to annealing atmosphere and annealing temperature. The magnetic properties were increased in the case of oxygen annealing, which actually leads in our case to an improvement of the crystallinity. - Highlights: • Bismuth ferrite was synthesized by solution evaporation method. • The effect of different annealing atmosphere on magnetic properties was studied. • The magnetic properties dramatically increased in case of Oxygen annealing. • The influence of crystalline size on magnetic properties was studied. • The magnetization was decreased as the temperature and crystallite size increased.

  2. Method of Creating Micro-scale Silver Telluride Grains Covered with Bismuth Nanoparticles

    Science.gov (United States)

    Kim, Hyun-Jung (Inventor); Choi, Sang Hyouk (Inventor); King, Glen C. (Inventor); Park, Yeonjoon (Inventor); Lee, Kunik (Inventor)

    2014-01-01

    Provided is a method of enhancing thermoelectric performance by surrounding crystalline semiconductors with nanoparticles by contacting a bismuth telluride material with a silver salt under a substantially inert atmosphere and a temperature approximately near the silver salt decomposition temperature; and recovering a metallic bismuth decorated material comprising silver telluride crystal grains.

  3. Effects of In Vitro Antibiotic Resistance on Treatment: Bismuth-Containing Regimens

    Directory of Open Access Journals (Sweden)

    Naoki Chiba

    2000-01-01

    Full Text Available Bismuth compounds remain useful for Helicobacter pylori eradication therapy. These include colloidal bismuth subcitrate (CBS, bismuth subsalicylate (BSS and, most recently, ranitidine bismuth citrate (RBC. CBS appears to prevent the development of imidazole resistance when coadministered with nitroimidazoles. Traditional triple therapy with bismuth, metronidazole and tetracycline or amoxicillin (BMT/A only partially overcomes metronidazole resistance. However, the addition of a PPI to bismuth triple therapy largely overcomes established metronidazole resistance if treatment is given for at least one week or more. When RBC rather than PPI is used with clarithromycin, this dual regimen appears to be more effective in preventing the development of secondary clarithromycin resistance. The triple combination of RBC, metronidazole and clarithromycin appears to be effective against metronidazole resistant strains of H pylori. Thus, overall, there is some evidence that bismuth compounds may prevent the development of antibiotic resistance and that existing antibiotic resistance may at least be partially overcome in vitro and in vivo. With the growing emergence of H pylori resistance to metronidazole and clarithromycin, further research to clarify the role of bismuth compounds is required.

  4. Ultra-flat bismuth films for diamagnetic levitation by template-stripping

    NARCIS (Netherlands)

    Kokorian, J; Engelen, Johannes Bernardus Charles; de Vries, Jeroen; Nazeer, H.; Woldering, L.A.; Abelmann, Leon

    2013-01-01

    In this paper we present a method to deposit thin films of bismuth with sub-nanometer surface roughness for application to diamagnetic levitation. Evaporated films of bismuth have a high surface roughness with peak to peak values in excess of 100 nm and average values on the order of 20 nm. We

  5. Design of a mixing system for simulated high-level nuclear waste melter feed slurries

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, M.E.; McCarthy, D.; Muhlstein, K.D.

    1986-03-01

    The Nuclear Waste Treatment Program development program consists of coordinated nonradioactive and radioactive testing combined with numerical modeling of the process to provide a complete basis for design and operation of a vitrification facility. The radioactive demonstration tests of equipment and processes are conducted before incorporation in radioactive pilot-scale melter systems for final demonstration. The mixing system evaluation described in this report was conducted as part of the nonradioactive testing. The format of this report follows the sequence in which the design of a large-scale mixing system is determined. The initial program activity was concerned with gaining an understanding of the theoretical foundation of non-Newtonian mixing systems. Section 3 of this report describes the classical rheological models that are used to describe non-Newtonian mixing systems. Since the results obtained here are only valid for the slurries utilized, Section 4, Preparation of Simulated Hanford and West Valley Slurries, describes how the slurries were prepared. The laboratory-scale viscometric and physical property information is summarized in Section 5, Laboratory Rheological Evaluations. The bench-scale mixing evaluations conducted to define the effects of the independent variables described above on the degree of mixing achieved with each slurry are described in Section 6. Bench-scale results are scaled-up to establish engineering design requirements for the full-scale mixing system in Section 7. 24 refs., 37 figs., 44 tabs.

  6. Effect of feeding strategies and cropping systems on greenhouse gas emission from Wisconsin certified organic dairy farms.

    Science.gov (United States)

    Liang, D; Sun, F; Wattiaux, M A; Cabrera, V E; Hedtcke, J L; Silva, E M

    2017-07-01

    Organic agriculture continues to expand in the United States, both in total hectares and market share. However, management practices used by dairy organic producers, and their resulting environmental impacts, vary across farms. This study used a partial life cycle assessment approach to estimate the effect of different feeding strategies and associated crop production on greenhouse gas emissions (GHG) from Wisconsin certified organic dairy farms. Field and livestock-driven emissions were calculated using 2 data sets. One was a 20-yr data set from the Wisconsin Integrated Cropping System Trial documenting management inputs, crop and pasture yields, and soil characteristics, used to estimate field-level emissions from land associated with feed production (row crop and pasture), including N 2 O and soil carbon sequestration. The other was a data set summarizing organic farm management in Wisconsin, which was used to estimate replacement heifer emission (CO 2 equivalents), enteric methane (CH 4 ), and manure management (N 2 O and CH 4 ). Three combinations of corn grain (CG) and soybean (SB) as concentrate (all corn = 100% CG; baseline = 75% CG + 25% SB; half corn = 50% CG + 50% SB) were assigned to each of 4 representative management strategies as determined by survey data. Overall, GHG emissions associated with crop production was 1,297 ± 136 kg of CO 2 equivalents/t of ECM without accounting for soil carbon changes (ΔSC), and GHG emission with ΔSC was 1,457 ± 111 kg of CO 2 equivalents/t of ECM, with greater reliance on pasture resulting in less ΔSC. Higher levels of milk production were a major driver associated with reduction in GHG emission per metric tonne of ECM. Emissions per metric tonne of ECM increased with increasing proportion of SB in the ration; however, including SB in the crop rotation decreased N 2 O emission per metric tonne of ECM from cropland due to lower applications of organically approved N fertility inputs. More SB at the expense of CG

  7. Effect of breeding strategy and feeding system on the within-herd variation of lean meat percents in Danish slaughter pigs.

    Science.gov (United States)

    Stege, H; Bagger, J; Nielsen, J P; Ersbøll, A K

    2011-08-01

    In several countries slaughter pigs are paid for individually, according to slaughter weight and lean meat percent (LMP). Production of uniform batches of pigs within the optimal weight and LMP limits will obtain the best price. Therefore, all pigs should have a similar growth rate (average daily gain, ADG) and reach an appropriate slaughter weight within the same time period. LMP may serve as a proxy for ADG since pigs with low LMP have significantly higher ADG than pigs with high LMP and vice versa. Both breeding strategy and feeding system may influence the range of variation among pigs. The aim of this study was to test the two following hypotheses: (1) Herds purchasing breeding gilts have a higher mean value and a lower variation (standard deviation) in LMP than herds producing their own breeding gilts and (2) Herds using restricted feeding of finishers have a higher mean value and a lower variation (standard deviation) in LMP than herds with ad libitum feeding of finishers. The study included 72 herds and a total of 345,132 pigs slaughtered during one year. Among the 72 herds, 40 were home-breeders and 32 purchased breeding gilts from a breeding company. Nineteen herds used restricted feeding, of which 8 (42%) were home-breeders. Fifty-three herds used ad libitum feeding, of which 32 (60%) were home-breeders. Breeding strategy had a significant effect on SDLMP (p=0.003), where purchase of breeding gilts resulted in a significantly lower standard deviation of the monthly LMP compared to home-bred gilts (a difference in median SDLMP of 0.2 percentage points or 8% difference between groups). Feeding system had a significant effect on the meanLMP (p<0.001), with a significantly higher meanLMP in herds using restrictive feeding compared to ad libitum feeding (60.7% versus 60.0%). Restrictive feeding also resulted in a significantly lower SDLMP (p<0.001) compared to ad libitum feeding (2.2% versus 2.5% or a 12% difference between groups). Copyright © 2011 Elsevier

  8. Effect of humic-plant feed preparations on biochemical blood parameters of laying hens in deep litter housing system.

    Science.gov (United States)

    Bubel, F; Dobrzański, Z; Gaweł, A; Pogoda-Sewerniak, K; Grela, E R

    2015-01-01

    An influence of various humic-plant feed additives based on some herbs (nettle, chamomile, yarrow, perforatum), lucerne and humic materials on biochemical indices of Lohmann Brown (LB) layers blood plasma was estimated. Hens were housed in deep litter system, 20 birds in a group. Four groups were formed: control (C - standard feeding), and experimental, supplemented with prepara- tions: E-1 herbal-humic, E-2 humic-herbal and E-3--humic-lucerne. Hens were placed in the pens on the 16th week of life, addition of preparations with standard food mixture started at the 22nd wk and lasted until 66th wk of life. Blood for analyses was collected four times in the following periods: 27, 37, 54 and 65th wk of life. The applied humic-plant preparations to a limited degree affected the values of examined biochemical parameters in serum: total protein (TP), albumins (Albs), glucose (Glu), urea, triacylglycerols (TAG), total cholesterol (TCh), alanine aminotransferase (ALT), aspartate aminot- ransferase (AST) and alkaline phosphatase (ALP). It is difficult to determine based on these study, which preparation is one the most active biologically, however is seems that humic-lucerne prepara- tion affected the examined blood parameters to the highest degree. The reference values ranges in hens blood serum LB hens were proposed for: TP (43-65 g/l), Albs (15-22 g/l), urea (0.5-1.2 mmol/l), Glu 10-15 mmol/l), TCh (2.2-4.5 mmol/l), TAG (10-24 mmol/l), AST (4-12 U/l), ALT (150-280 mmol/l) and ALP (190-350 U/l).

  9. Optical properties of bismuth-doped silica fibres in the temperature range 300 - 1500 K

    Energy Technology Data Exchange (ETDEWEB)

    Dvoretskii, D A; Bufetov, Igor' A; Vel' miskin, V V; Zlenko, Alexander S; Khopin, V F; Semjonov, S L; Guryanov, Aleksei N; Denisov, L K; Dianov, Evgenii M

    2012-09-30

    The visible and near-IR absorption and luminescence bands of bismuth-doped silica and germanosilicate fibres have been measured for the first time as a function of temperature. The temperature-dependent IR luminescence lifetime of a bismuth-related active centre associated with silicon in the germanosilicate fibre has been determined. The Bi{sup 3+} profile across the silica fibre preform is shown to differ markedly from the distribution of IR-emitting bismuth centres associated with silicon. The present results strongly suggest that the IR-emitting bismuth centre comprises a lowvalence bismuth ion and an oxygen-deficient glass network defect. (optical fibres, lasers and amplifiers. properties and applications)

  10. Electronic Properties of Tin and Bismuth from Angular Correlation of Annihilation Photons

    DEFF Research Database (Denmark)

    Mogensen, O.E.; Trumpy, Georg

    1969-01-01

    A linear slit setup has been used to obtain results of angular-correlation measurements in (a) tin single crystals in three orientations: [001], [100], and [110], (b) bismuth single crystals in four orientations: [111], [100], [1¯10], and [2¯1¯1], (c) solid and liquid tin and bismuth, and (d......) deformed bismuth. For both metals, the single-crystal angular-correlation curves lie near to the free-electron parabola. The tin curves show more anisotropy than the bismuth curves. An important result is the clear anisotropy found in the high-momentum part of the curves—the tails—for both metals. Little...... of the liquid-metal curves are smaller and of another form than the tails of polycrystalline curves; no Gaussian with only one adjustable constant factor can give a fit to both tails. No useful method for interpreting liquid-metal angular-correlation curves seems to exist. Two deformed bismuth samples gave...

  11. Implications of livestock feeding management on soil fertility in smallholder farming systems

    NARCIS (Netherlands)

    Delve, R.J.; Cadisch, G.; Tanner, J.C.; Thorpe, W.; Thorne, P.J.; Giller, K.E.

    2001-01-01

    The role of livestock in nitrogen cycling in mixed crop–livestock farming systems of sub-Saharan Africa was explored. Cattle were fed a range of diets to investigate the effects on partitioning of nitrogen between urine and faeces and on the chemical composition of the manures produced. The

  12. Acceptance test report for high pressure water jet system feed pump

    International Nuclear Information System (INIS)

    Crystal, J.B.

    1996-01-01

    This document summarizes results of WHC-SD-SNF-ATP-016, Rev. 0 ''Acceptance Test Procedure High Pressure Water Jet System'', conducted on December 20, 1995 and December 22, 1995. This jet supplies water at 15,000 psi at sign 15 gpm to nozzles to clean surfaces of empty fuel storage canisters

  13. Modification of digestive system microbiome of lactating dairy cows by feeding Bovamine: effect on ruminal fermentation

    Science.gov (United States)

    We evaluated the immune modulatory effects as well as effects on productivity of Bovamine® (Lactobacillus acidophilus strain NP51 and Probionibacterium freudenreichii) on the digestive system microbiome of dairy cattle during late lactation (average DIM = 202). To unveil the underlying mechanisms, ...

  14. High-fat diet feeding differentially affects the development of inflammation in the central nervous system.

    Science.gov (United States)

    Guillemot-Legris, Owein; Masquelier, Julien; Everard, Amandine; Cani, Patrice D; Alhouayek, Mireille; Muccioli, Giulio G

    2016-08-26

    Obesity and its associated disorders are becoming a major health issue in many countries. The resulting low-grade inflammation not only affects the periphery but also the central nervous system. We set out to study, in a time-dependent manner, the effects of a high-fat diet on different regions of the central nervous system with regard to the inflammatory tone. We used a diet-induced obesity model and compared at several time-points (1, 2, 4, 6, 8, and 16 weeks) a group of mice fed a high-fat diet with its respective control group fed a standard diet. We also performed a large-scale analysis of lipids in the central nervous system using HPLC-MS, and we then tested the lipids of interest on a primary co-culture of astrocytes and microglial cells. We measured an increase in the inflammatory tone in the cerebellum at the different time-points. However, at week 16, we evidenced that the inflammatory tone displayed significant differences in two different regions of the central nervous system, specifically an increase in the cerebellum and no modification in the cortex for high-fat diet mice when compared with chow-fed mice. Our results clearly suggest region-dependent as well as time-dependent adaptations of the central nervous system to the high-fat diet. The differences in inflammatory tone between the two regions considered seem to involve astrocytes but not microglial cells. Furthermore, a large-scale lipid screening coupled to ex vivo testing enabled us to identify three classes of lipids-phosphatidylinositols, phosphatidylethanolamines, and lysophosphatidylcholines-as well as palmitoylethanolamide, as potentially responsible for the difference in inflammatory tone. This study demonstrates that the inflammatory tone induced by a high-fat diet does not similarly affect distinct regions of the central nervous system. Moreover, the lipids identified and tested ex vivo showed interesting anti-inflammatory properties and could be further studied to better characterize

  15. The Plumbing System Feeding the Lusi Eruption Revealed by Ambient Noise Tomography

    Science.gov (United States)

    Fallahi, Mohammad Javad; Obermann, Anne; Lupi, Matteo; Karyono, Karyono; Mazzini, Adriano

    2017-10-01

    Lusi is a sediment-hosted hydrothermal system featuring clastic-dominated geyser-like eruption behavior in East Java, Indonesia. We use 10 months of ambient seismic noise cross correlations from 30 temporary seismic stations to obtain a 3-D model of shear wave velocity anomalies beneath Lusi, the neighboring Arjuno-Welirang volcanic complex, and the Watukosek fault system connecting the two. Our work reveals a hydrothermal plume, rooted at a minimum 6 km depth that reaches the surface at the Lusi site. Furthermore, the inversion shows that this vertical anomaly is connected to the adjacent volcanic complex through a narrow ( 3 km wide) low velocity corridor slicing the survey area at a depth of 4-6 km. The NE-SW direction of this elongated zone matches the strike of the Watukosek fault system. Distinct magmatic chambers are also inferred below the active volcanoes. The large-scale tomography features an exceptional example of a subsurface connection between a volcanic complex and a solitary erupting hydrothermal system hosted in a hydrocarbon-rich back-arc sedimentary basin. These results are consistent with a scenario where deep-seated fluids (e.g., magmas and released hydrothermal fluids) flow along a region of enhanced transmissivity (i.e., the Watukosek fault system damage zone) from the volcanic arc toward the back arc basin where Lusi resides. The triggered metamorphic reactions occurring at depth in the organic-rich sediments generated significant overpressure and fluid upwelling that is today released at the spectacular Lusi eruption site.

  16. Bioavailability and chronic toxicity of bismuth citrate to earthworm Eisenia andrei exposed to natural sandy soil.

    Science.gov (United States)

    Omouri, Zohra; Hawari, Jalal; Fournier, Michel; Robidoux, Pierre Yves

    2018-01-01

    The present study describes bioavailability and chronic effects of bismuth to earthworms Eisenia andrei using OECD reproduction test. Adult earthworms were exposed to natural sandy soil contaminated artificially by bismuth citrate. Average total concentrations of bismuth in soil recovered by HNO 3 digestion ranged from 75 to 289mg/kg. Results indicate that bismuth decreased significantly all reproduction parameters of Eisenia andrei at concentrations ≥ 116mg/kg. However, number of hatched cocoons and number of juveniles seem to be more sensitive than total number of cocoons, as determined by IC 50 ; i.e., 182, 123 and > 289mg/kg, respectively. Bismuth did not affect Eisenia andrei growth and survival, and had little effect on phagocytic efficiency of coelomocytes. The low immunotoxicity effect might be explained by the involvement of other mechanisms i.e. bismuth sequestered by metal-binding compounds. After 28 days of exposure bismuth concentrations in earthworms tissue increased with increasing bismuth concentrations in soil reaching a stationary state of 21.37mg/kg dry tissue for 243mg Bi/kg dry soil total content. Data indicate also that after 56 days of incubation the average fractions of bismuth available extracted by KNO 3 aqueous solution in soil without earthworms varied from 0.0051 to 0.0229mg/kg, while in soil with earthworms bismuth concentration ranged between 0.310-1.347mg/kg dry soil. We presume that mucus and chelating agents produced by earthworms and by soil or/and earthworm gut microorganisms could explain this enhancement, as well as the role of dermal and ingestion routes of earthworms uptake to soil contaminant. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. A general strategy to superstructured networks and nested self-similar networks of bismuth compounds.

    Science.gov (United States)

    Guo, Chuan Fei; Zhang, Jianming; Tian, Ye; Liu, Qian

    2012-10-23

    We have reported the synthesis of superstructured nanonetworks of BiOCl and nested nanonetworks of Bi(2)S(3) in a series of lattice-directed topotactic transformations [C. F. Guo et al. J. Am. Chem. Soc. 2011, 138, 8211-8215]. Here we extend the transformations to a much broader system including ordered nanowall networks of BiOCl, BiOBr, Bi(2)O(2)CO(3), β-Bi(2)O(3), and Bi(2)S(3), as well as nested self-similar networks of Bi(2)S(3) and amorphous BiO(x). We suggest even more superstructured networks and nested self-similar networks of bismuth compounds with a lattice parameter of ~2(n/2) × 3.9 Å (n = 0, 1, 2, 3, 4), might also be obtained. The superstructured networks and nested networks are novel architectures that may find applications in electronic devices, sensors, filters, and photocatalysts.

  18. Oxygen measurements in stagnant lead-bismuth eutectic using electrochemical sensors

    Energy Technology Data Exchange (ETDEWEB)

    Konys, J. [Forschungszentrum Karlsruhe GmbH, Institute for Materials Research III, 76021 Karlsruhe (Germany); Muscher, H. [Forschungszentrum Karlsruhe GmbH, Institute for Materials Research III, 76021 Karlsruhe (Germany)]. E-mail: heinrich.muscher@imf.fzk.de; Voss, Z. [Forschungszentrum Karlsruhe GmbH, Institute for Materials Research III, 76021 Karlsruhe (Germany); Wedemeyer, O. [Forschungszentrum Karlsruhe GmbH, Institute for Materials Research III, 76021 Karlsruhe (Germany)

    2004-11-01

    Sensors are the major part of an active oxygen control system (OCS) to be used in ADS reactors employing lead bismuth eutectic (LBE). We tested Pt/air and Bi/Bi{sub 2}O{sub 3} probes based on yttria-stabilized zirconia (YSZ) solid electrolytes. The sensors were calibrated by evaluating the electromotive force (EMF) - temperature dependencies in oxygen un-/saturated stagnant LBE compared to the van't-Hoff's isotherm. Also, probe kinetics while changing the H{sub 2}/H{sub 2}O ratio was studied. Typical, reproducible curves are presented confirming attainment of oxygen equilibrium between the fluids. The sensor outputs are deterministic, predictable. Exceptional small drifts were due to interfacial kinetics, not to the sensors behavior. Simultaneous testing of several probes in one melt was performed. The sensors seemed to be qualified for large scale use.

  19. Temperature dependence of fluorescence decay time and emission spectrum of bismuth germanate

    International Nuclear Information System (INIS)

    Melcher, C.L.; Liberman, A.; Schweitzer, J.S.; Simonetti, J.

    1985-01-01

    Bismuth germanate has become an increasingly popular replacement for NaI(Tl) scintillators in recent years, mainly due to its higher detection efficiency. However, its scintillation efficiency and fluorescence decay time are strongly temperature dependent. Optimum performance of detector systems which employ BGO crystals depends on knowledge of the BGO pulse shape and intensity and its emission spectrum at the operating temperature of the detector. Measurements of these quantities are presented over the temperature range -47 0 C to +111 0 C. Although the emission spectrum shifts only slightly over this temperature range, the scintillation efficiency and fluorescence decay time are strongly temperature dependent. In addition to the usefulness of these data for optimizing detector design, the results imply that luminescence quenching in BGO cannot be characterized by a single thermal activation to a radiationless transition but that a more complex model is required to characterize the light output from BGO crystals

  20. Weak antilocalization and universal conductance fluctuations in bismuth telluro-sulfide topological insulators

    Energy Technology Data Exchange (ETDEWEB)

    Trivedi, Tanuj, E-mail: tanuj@utexas.edu; Sonde, Sushant; Movva, Hema C. P.; Banerjee, Sanjay K., E-mail: banerjee@ece.utexas.edu [Microelectronics Research Center, The University of Texas at Austin, Austin, Texas 78758 (United States)

    2016-02-07

    We report on van der Waals epitaxial growth, materials characterization, and magnetotransport experiments in crystalline nanosheets of Bismuth Telluro-Sulfide (BTS). Highly layered, good-quality crystalline nanosheets of BTS are obtained on SiO{sub 2} and muscovite mica. Weak-antilocalization (WAL), electron-electron interaction-driven insulating ground state and universal conductance fluctuations are observed in magnetotransport experiments on BTS devices. Temperature, thickness, and magnetic field dependence of the transport data indicate the presence of two-dimensional surface states along with bulk conduction, in agreement with theoretical models. An extended-WAL model is proposed and utilized in conjunction with a two-channel conduction model to analyze the data, revealing a surface component and evidence of multiple conducting channels. A facile growth method and detailed magnetotransport results indicating BTS as an alternative topological insulator material system are presented.