WorldWideScience

Sample records for biomasse mit hilfe

  1. Process chain analysis for methanol production from biomass with the aid of mathematical models; Prozesskettenanalyse fuer die Methanolerzeugung aus Biomasse mit Hilfe von mathematischen Modellen

    Energy Technology Data Exchange (ETDEWEB)

    Saller, G.; Krumm, W. [Siegen Univ. (Gesamthochschule) (Germany)

    1996-12-31

    Using the example of primary energy consumption for methanol production from cellulose-rich biomass, it is shown that process chain analysis with mathematical modelling of the technical systems enables calculations of eco-inventories as a function of the relevant process parameters. Optimisation of process chains with regard to ecological indicators or cost necessitates mathematical modelling because of the many different parameters and parameter combinations involved. (orig) [Deutsch] Am Beispiel des Primaerenergieaufwands bei der Methanolgewinnung aus zellulosealtiger Biomasse wurde gezeigt, dass die Prozesskettenanalyse mit Abbildung der technischen Systeme in mathematischen Modellen die Berechnung von Oekoinventaren in Abhaengigkeit der relevanten Prozessparameter erlaubt. Die Optimierung von Prozessketten hinsichtlich oekologischer Indikatoren oder Kosten ist wegen der Vielzahl an unterschiedlichen Parametern und deren Kombinationsmoeglichkeiten nur mit Hilfe mathematischer Modelle moeglich. (orig)

  2. Process chain analysis for methanol production from biomass with the aid of mathematical models; Prozesskettenanalyse fuer die Methanolerzeugung aus Biomasse mit Hilfe von mathematischen Modellen

    Energy Technology Data Exchange (ETDEWEB)

    Saller, G; Krumm, W [Siegen Univ. (Gesamthochschule) (Germany)

    1997-12-31

    Using the example of primary energy consumption for methanol production from cellulose-rich biomass, it is shown that process chain analysis with mathematical modelling of the technical systems enables calculations of eco-inventories as a function of the relevant process parameters. Optimisation of process chains with regard to ecological indicators or cost necessitates mathematical modelling because of the many different parameters and parameter combinations involved. (orig) [Deutsch] Am Beispiel des Primaerenergieaufwands bei der Methanolgewinnung aus zellulosealtiger Biomasse wurde gezeigt, dass die Prozesskettenanalyse mit Abbildung der technischen Systeme in mathematischen Modellen die Berechnung von Oekoinventaren in Abhaengigkeit der relevanten Prozessparameter erlaubt. Die Optimierung von Prozessketten hinsichtlich oekologischer Indikatoren oder Kosten ist wegen der Vielzahl an unterschiedlichen Parametern und deren Kombinationsmoeglichkeiten nur mit Hilfe mathematischer Modelle moeglich. (orig)

  3. Optimierung der Hupkraftverteilung eines airbagintegrierten Automobillenkrades mit Hilfe einer Parameterstudie

    OpenAIRE

    Pietsch, Karsten

    2011-01-01

    Die Hupkraftverteilung eines airbagintegrierten Automobillenkrades wird mit Hilfe einer Parameterstudie in MathCAD so optimiert, das an jeder Krafteinleitungsposition die Hupe mit einer geforderten Mindestkraft betätigt werden kann. Nach der Modellierung in MathCAD der zugehörigen Geometrie und der Dimensionierung der Federlagerung ist das zugehörige mechanische Ersatzmodell mit Hilfe einer Parameterstudie verändert worden, so dass die Hupkraftforderung erfüllt wird.

  4. Mathematical modelling of the gasification of cellulose-containing biomass using a zoning model; Mathematische Modellierung der Vergasung zellulosehaltiger Biomasse mit Hilfe eines Zonenmodells

    Energy Technology Data Exchange (ETDEWEB)

    Jung, K; Saller, G; Funk, G; Krumm, W [Siegen Univ. (Gesamthochschule) (Germany). Inst. fuer Energietechnik

    1998-09-01

    The composition of the product gas is decisive for the further process stages. In contrast to coal gasification, which has been investigated for more than a century, there is still a lack of theoretical and experimental knowledge on biomass gasification. The contribution presents a mathematical model that is to provide deeper knowledge of the constant-flow fixed-bed gasifier, which is still widely regarded as a `black box`. (orig./SR) [Deutsch] Einen wesentlichen Prozessschritt der thermochemischen Konversion stellt der Vergasungsprozess dar, da die Zusammensetzung des erhaltenen Gases fuer die weiteren Prozessschritte von entscheidender Bedeutung ist. Im Gegensatz zur Vergasung von Kohle, die bereits seit fast 100 Jahren untersucht wird, besteht bei der Vergasung von Biomasse ein starker Nachholbedarf in Bezug auf das theoretische und experimentelle Detailwissen. In diesem Beitrag wird im Rahmen eines mathematischen Modells ein Ansatz vorgestellt, in dem der Gleichstrom-Festbettvergaser, der bisher meist als `blackbox` betrachtet wurde, weiter aufgeschluesselt wird. (orig./SR)

  5. Kundenorientierte Produktentwicklung mit Hilfe von Quality Function Deployment (QFD)

    OpenAIRE

    Schloske, Alexander

    2011-01-01

    Die Produktentwicklung von heute muss in immer kürzeren Zeiträumen kunden- und kostenorientierte Produkte entwickeln. Zur systematischen Unterstützung dieser Aufgabe im Rahmen der Produktentwicklung wird die Methode Quality Function Deployment (QFD) eingesetzt. Die konsequente Umsetzung der Stimme des Kunden in die Sprache des Unternehmens gelingt mit Quality Function Deployment (QFD). Die Methode wertet systematisch Kundenanforderungen an Produkte aus und führt zu innovativen Lösungen, die s...

  6. Optimising electrical system architecture using genetic algorithms; Optimierung der Bordnetzarchitektur mit Hilfe genetischer Algorithmen

    Energy Technology Data Exchange (ETDEWEB)

    Luebke, A. [Volkswagen AG, Wolfsburg (Germany). Fahrzeug-Elektrik/ -Elektronik Vorentwicklung; Reuss, H.C. [Technische Univ. Dresden (Germany). Inst. fuer Verbrennungsmotoren und Kraftfahrzeuge

    2000-06-01

    Control units in vehicles are increasingly being networked. Framework conditions, for example the cost of network nodes, change so rapidly that an optimised network rarely survives one model generation. This article describes the possible applications of a genetic algorithm which can be used to optimise the architecture of the datanet quickly and easily. (orig.) [German] Die Vernetzung der Steuergeraete im Kraftfahrzeug nimmt staendig zu. Dabei aendern sich die Randbedingungen, zum Beispiel die Kosten von Netzknoten, laufend, so dass eine einmal optimierte Architektur der Vernetzung schon fuer das naechste Fahrzeugmodell nicht mehr das Optimum darstellt. Der vorliegende Artikel beschreibt die Anwendungsmoeglichkeit eines genetischen Algorithmus, mit dessen Hilfe sich die Architektur des Datennetzes schnell und zuverlaessig optimieren laesst. (orig.)

  7. Redoxspeziation von endlagerrelevanten Elementen mit Hilfe von Trennmethoden gekoppelt an ein Massenspektrometer mit induktiv gekoppeltem Plasma

    OpenAIRE

    Graser, Carl-Heinrich

    2015-01-01

    Im Rahmen dieser Arbeit wurden Redoxspeziationsanalysen von Eisen, Neptunium und Plutonium per CE-SF-ICP-MS durchgeführt. Durch Optimierung der Trennparameter konnten Trennungen der Pu Oxidationsstufen III bis VI und Trennungen der Np Oxidationsstufen IV bis VI binnen 15 Minuten mit einer Nachweisgrenze von 10-12 M durchgeführt werden. Die Trennung der Fe Oxidationsstufen II und III gelang in weniger als 5 Minuten mit einer Nachweisgrenze von 5-10-8 M.

  8. Advanced waste water cleaning with the aid of an algae biofilm; Weitergehende Abwasserreinigung mit Hilfe eines Algenbiofilms

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, G.; Patzold, V.; Ike, A.; Sekoulov, I. [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Arbeitsbereich Abwasserwirtschaft

    1999-07-01

    These first investigations have led to results indicating that advanced waste water cleaning with the aid of algae biofilm as a downstream process stage is feasible. The concentration of phosphorus in waste water could be reduced to less than 1 mg per litre. Ammonium, which is toxic to fish, was nitrified, and the overall nitrogen concentration could be cut down. The concentration of bacteria was reduced by means of a close-to-nature process to less than the limiting values set by the European Union directive governing the quality of bathing waters. (orig.) [German] Die Ergebnisse dieser ersten Untersuchungen zeigen, dass eine weitergehende Abwasserreinigung mit Hilfe eines Algenbiofilms als nachgeschaltete Verfahrensstufe moeglich ist. Die Phosphorkonzentration im Abwasser konnte auf unter 1 mg/l reduziert werden. Fischgiftiges Ammonium wurde nitrifiziert und die Gesamtstickstoffkonzentration konnte gesenkt werden. Die Bakterienkonzentration konnte mit Hilfe eines naturnahen Verfahrens bis unter die Grenzwerte der EU-Richtlinie ueber die Qualitaet der Badegewaesser reduziert werden. (orig.)

  9. Kunden- und wettbewerbsorientierte Produktentwicklung mit QFD: Kundenorientierte Produktentwicklung mit Hilfe von Quality Function Deployment (QFD)

    OpenAIRE

    Schloske, Alexander

    2013-01-01

    Die Produktentwicklung von heute muss in immer kürzeren Zeiträumen kunden- und kostenorientierte Produkte entwickeln. Zur systematischen Unterstützung dieser Aufgabe im Rahmen der Produktentwicklung wird die Methode Quality Function Deployment (QFD) eingesetzt. Die konsequente Umsetzung der Stimme des Kunden in die Sprache des Unternehmens gelingt mit Quality Function Deployment (QFD). Die Methode wertet systematisch Kundenanforderungen an Produkte aus und führt zu innovativen Lösungen, die s...

  10. Investigations of elementary reactions of the methyl radical with the aid of laser magnetic resonance; Untersuchungen von Elementarreaktionen des Methylradikals mit Hilfe der Laser-Magnetischen-Resonanz

    Energy Technology Data Exchange (ETDEWEB)

    Deters, R.J.

    1998-01-01

    Selected elementary reactions of CH{sub 3} radicals in an isothermal flow system in the gaseous phase were investigated by means of LMR. [Deutsch] In dieser Arbeit wurden ausgewaehlte Elementarreaktionen von CH{sub 3}-Radikalen in einem isothermen Stroemungssystem in der Gasphase mit Hilfe der Laser-Magnetischen-Resonanz untersucht. (orig.)

  11. Energiemessungen bei Aspergillus niger mit Hilfe eines automatischen Mikro-Kompensations-Calorimeters

    NARCIS (Netherlands)

    Algera, Leendert

    1932-01-01

    Beschrieben wurde ein Calorimeter. Das Prinzip der Warmemessung besteht darin, dasz die entwickelte Wärme, sobald sie entsteht, durch eine entsprechende Kältemenge kompensiert wird. Sobald die Temperatur des Kulturgefaszes ein wenig ansteigt, wird trockne Luft gepumpt durch ein mit Wasser gefulltes

  12. Calculation of transient overvoltages in a 145-kV-cable termination by using the FDTD-method; Feldstaerkenberechnung bei transienten Spannungen an einem 145-kV-Endverschluss mit Hilfe des FDTD-Verfahrens

    Energy Technology Data Exchange (ETDEWEB)

    Gerhard, G.; Ioffe, A. [Gerhard-Mercator-Univ.-GH Duisburg (Germany). Fachgebiet Elektrische Energieuebertragung

    1997-10-20

    The transient electromagnetic field occured from the overvoltages in a slip-on cable termination was calculated by using the FDTD-method. The electric field strength in a gap between the cable shield and the stress cone was studied. (orig.) [Deutsch] Mit Hilfe des FDTD-Feldberechnungsverfahrens wird das transiente elektromagnetische Feld in einem Aufschiebeendverschluss untersucht, wobei ein Luftspalt zwischen den leitenden Teilen der Kabelader und dem Feldsteuerelement beruecksichtigt wird. (orig.)

  13. Seasonal shading of walls with transparent thermal insulation by means of prismatic panes; Saisonale Abschattung von transparent gedaemmten Waenden mit Hilfe von Prismenscheiben

    Energy Technology Data Exchange (ETDEWEB)

    Christoffers, D.; Kneser, P.; Schramm, U. [Institut fuer Solarenergieforschung GmbH Hameln/Emmerthal (ISFH), Emmerthal (Germany). Abt. Systemtechnik von Solaranlagen

    1998-02-01

    Using prismatic panes, a seasonal shading responsive to the sun`s position can be realized. Thus the solar gains from direct radiation can be closely matched to the annual pattern of the heating requirements of buildings. The panes are suitable for window or facade elements in applications which do not need transparency insulated walls. The direct radiation received on a vertical south-oriented facade is reduced to 10% on clear summer days, while 90% is transmitted on clear winter days. The paper reports on results from computer simulations and experiences from a one year field test. (orig.) [Deutsch] Mit Hilfe von Prismenscheiben kann eine sonnenstandsabhaengige, saisonale Verschattung realisiert werden. Damit lassen sich solare Gewinne aus direkter Einstrahlung sehr gut an den jaehrlichen Verlauf des Heizenergiebedarfs von Gebaeuden anpassen. Sie eignen sich als nach Sueden weisende Fenster- und Fassadenelemente vorzugsweise in Bereichen, die keinen freien Durchblick benoetigen, insbesondere auch fuer transparent gedaemmte Solarwaende. Die auf die Suedfassade treffende Direktstrahlung wird durch die Prismenscheibe an klaren Wintertagen auf etwa 90%, an klaren Sommertagen auf 10% reduziert. Der Beitrag beschreibt die Ergebnisse von Simulationsrechnungen und die Erfahrungen aus einem einjaehrigen Praxistest. (orig.)

  14. Ein Beitrag zur Bewertung der Schlachtkörperzusammensetzung an lebenden Jungsauen mit Hilfe der Ultraschall-Messmethode

    Directory of Open Access Journals (Sweden)

    U. Uusisalmi

    1973-07-01

    Full Text Available In der Schweinezucht ist die Verbesserung der Fleischleistung in starkem Masse von der Eigenleistungsprüfung abhängig. An 97 weiblichen Mastschweinen mit einem durchschnittlichen Gewicht von 90 kg wurden die Beziehungen zwischen Ultraschallmessungen am lebenden Tier und den Schlachtleistungsmerkmalen überprüft. Die hohen Korrelationen zwischen der Speckdicke am lebenden Tier und nach dem Schlachten ermöglichen eine gute Einschätzung der Fettauflage mit dem Echolot. Werden die Ultraschall-Messwerte in Indices verknüft, so wird die Aussagefähigkeit der einzelnen Daten für den Züchter verbessert. Die Messpunkte 2,3, 4,6, 8 + 8a, 12, 13 und 14 erscheinen besonders geeignet für die komplexe Bewertung des Schlachtkörpers. Die Korrelationen zwischen dem Index aus mehreren Ultraschallmesswerten und der Rückenspeckdicke ist 0,80, zwischen dem Index und dem Anteil Haut und Fett am Schlachtkörper ist 0,77, zwischen dem Index und dem Anteil Fleisch und Knochen am Schlachtkörper ist 0,71, zwischen Index und Haut und Fettauflage am Schinken 0,66 und zwischen Index und Fleisch-Knochen vom Schinken 0,45. Diese Werte zeigen, dass eine Selektion nach der Eigenleistung mit Ultraschall ermittelt bei Jungsauen erfolgverspechend in der Schweinezucht angewendet werden kann.

  15. Investigation of ultrafast lattice heating in thin (semi-)metal films using time-resolved electron diffraction; Untersuchung der schnellen Gitteraufheizung in duennen (Halb-)Metallfilmen mit Hilfe zeitaufgeloester Elektronenbeugung

    Energy Technology Data Exchange (ETDEWEB)

    Ligges, Manuel

    2009-07-21

    -Waller-Effektes im Elektronenbeugungsbild beobachtet werden. Mit Hilfe des Anrege-Abfrage-Schemas laesst sich durch eine Serie von Momentaufnahmen diese Gitteraufheizung zeitaufgeloest beobachten. Die experimentell ermittelten Zeitskalen fuer diesen Prozess lassen Rueckschluesse auf die Elektron-Phonon-Kopplung in den untersuchten Materialien zu. In dieser Arbeit wurde ein zeitaufloesendes Transmissionselektronenbeugungsexperiment mit Sub-Pikosekunden zeitlicher Aufloesung aufgebaut und optimiert. Mit Hilfe dieses Experimentes wurde die schnelle Gitteraufheizung in duennen Gold-, Silber-, Kupfer- und Wismutfilmen untersucht. Das beobachtete Aufheizverhalten der Metallfilme zeigt Uebereinstimmungen mit theoretischen Vorhersagen verschiedener Modellrechnungen. Die Ergebnisse der Messungen an Wismutfilmen zeigen ein bisher nicht beobachtetes Kopplungsverhalten. (orig.)

  16. Short-time X-ray diffraction with an efficient-optimized, high repetition-rate laser-plasma X-ray-source; Kurzzeit-Roentgenbeugung mit Hilfe einer Effizienz-optimierten, hochrepetierenden Laser-Plasma-Roentgenquelle

    Energy Technology Data Exchange (ETDEWEB)

    Kaehle, Stephan

    2009-04-23

    Erzeugung von Roentgenimpulsen mit Impulsdauern von unter einer Pikosekunde dargestellt, wobei der Schwerpunkt auf den so genannten Laser-Plasma-Roentgenquellen mit hoher Wiederholrate liegt. In diesem Fall werden ultrakurze Laserimpulse auf ein Metall fokussiert, so dass im Brennpunkt Intensitaeten von ueber 10{sup 16} W/cm{sup 2} herrschen. Im Idealfall werden auf diese Art schnelle Elektronen erzeugt, die fuer die Entstehung von Linienstrahlung verantwortlich sind. In diesen Experimenten wird Titan K{sub {alpha}}-Strahlung erzeugt, diese Photonen besitzen eine Energie von 4,51 keV. Zur effizienten Produktion von Linienstrahlung wird hier der Ti:Sa-Laser hinsichtlich der Laserenergie und der Impulsform optimiert und der Einfluss der verschiedenen Parameter auf die K{sub {alpha}}-Entstehung systematisch untersucht. Es werden die Einfluesse von Laserintensitaet, systembedingten Vorimpulsen und von Phasenmodulation ueberprueft. Es stellt sich heraus, dass neben der Erhoehung der K{sub {alpha}}-Strahlung durch eine geeignete Laserintensitaet eine Reduzierung der Roentgenhintergrundstrahlung von entscheidender Bedeutung fuer die Gewinnung von deutlichen Beugungsbildern ist. Diese Hintergrundstrahlung setzt sich ueberwiegend aus Bremsstrahlung zusammen. Sie kann durch die Vermeidung von intrinsischen Vorimpulsen und mit Hilfe von Phasenmodulation 2. Ordnung unterdrueckt werden. Mit Hilfe von optischen Anrege- und Roentgenabfrageexperimenten wird die Entstehung von akustischen Wellen nach ultrakurzer optischer Anregung in einem 150 nm dicken Ge(111)-Film auf Si(111) untersucht. Diese akustischen Wellen werden von thermischen (auf dieser Zeitskala zeitunabhaengigen) und elektronischen (zeitabhaengigen) Druckbetraegen angetrieben. Als wesentliches Ergebnis stellt sich heraus, dass der relative Betrag des elektronischen Drucks mit abnehmender Anregungsdichte zunimmt. (orig.)

  17. Energy generation from biomass with the aid of fuel cells; Energetische Nutzung von Biomasse mit Brennstoffzellenverfahren

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    To provide an opportunity for information exchange at the interface between biomass use for energy generation and developers of fuel cells, the workshop 'Energy generation from biomass with the aid of fuel cells' was held by the Fachagentur Nachwachsende Rohstoffe on 9 and 10 December 1998. The lectures and discussions permit to assess better the opportunities and restraints resulting from the use of biogenous fuel gas in fuel cells. (orig.) [German] Um an der Schnittstelle zwischen der energetischen Nutzung von Biomasse und den Entwicklern von Brennstoffzellen einen Informationsaustausch zu ermoeglichen, wurde am 9. und 10. Dezember 1998 der Workshop 'Energetische Nutzung von Biomasse mit Brennstoffzellenverfahren' von der FNR veranstaltet. Die Vortraege und die Diskussion erlauben eine bessere Einschaetzung der Moeglichkeiten und Restriktionen, die sich bei dem Einsatz von biogenen Brenngasen in Brennstoffzellen ergeben. (orig.)

  18. Measurement of bubble velocity in an air/water flow through a narrow gap by using high-speed cinematography; Ermittlung der Blasengeschwindigkeit einer Luft/Wasser-Spaltstroemung mit Hilfe der Hochgeschwindigkeitskinematographie

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, S.; Friedel, L. [Technische Univ. Hamburg-Harburg, Hamburg (Germany)

    1997-12-01

    To predict the mass flow of a two phase mixture at a given pressure difference through narrow gaps, apart from the change in state of the gas phase during pressure reduction, the knowledge of the fluid dynamics on balance which occurs in the form of a relative velocity between the phases is important. These two influences were examined with the aid of high speed cinematography for a water/air bubble flow. Apart from the quick reduction in pressure due to the sudden reduction in crossection at the entry to the gap, there are no significant differences between the experimentally determined volume change in bubbles of different sizes and that calculated assuming an isothermal change in state. The mean velocity of the bubbles does not differ appreciably from that calculated assuming an homogeneous flow. [Deutsch] Zur Vorhersage des sich bei gegebener Druckdifferenz einstellenden Massenstroms eines Zweiphasengemischs durch enge Spalte ist neben der Zustandsaenderung der Gasphase waehrend der Druckabsenkung u.a. auch die Kenntnis des sich dabei einstellenden fluiddynamischen Ungleichgewichts in Form einer Relativgeschwindigkeit zwischen den Phasen von Bedeutung. Diese beiden Einfluesse wurden mit Hilfe der Hochgeschwindigkeitskinematographie fuer eine Wasser/Luft-Blasenstroemung untersucht. Abgesehen von der raschen Druckabsenkung aufgrund der ploetzlichen Querschnittsverengung im Spalteintritt treten keine nennenswerten Unterschiede zwischen den experimentell ermittelten und den unter der Annahme einer isothermen Zustandsaenderungen berechneten Volumenaenderung verschiedengrosser Blasen auf. Die mittlere Geschwindigkeit der Blasen unterscheidet sich dabei nicht wesentlich von der unter der Annahme einer homogenen Stroemung berechneten. (orig.)

  19. Measurement of bubble velocity in an air/water flow through a narrow gap by using high-speed cinematography; Ermittlung der Blasengeschwindigkeit einer Luft/Wasser-Spaltstroemung mit Hilfe der Hochgeschwindigkeitskinematographie

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, S.; Friedel, L. [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Arbeitsbereich Stroemungsmechanik

    1998-05-01

    For the prediction of the establishing two-phase massflow for a given pressure difference across a narrow rectangular gap, beside others, the knowledge of the change of state of the gas phase and the fluiddynamic non-equilibrium in form of the slip velocity between the phases is needed. For an air/water bubbly flow it turned out by using high-speed cinematography that apart from the quick pressure decrease during the rapid acceleration at the gap inlet no significant difference between the measured and the predicted bubble size changes assuming an isothermal change of state of the air bubbles could be detected. The measured mean bubble velocities do not considerably deviate from the values calculated on the basis of a homogeneous flow. (orig.) [Deutsch] Zur Vorhersage des sich bei gegebener Druckdifferenz einstellenden Massenstroms eines Zweiphasengemischs durch enge Spalte ist neben der Zustandsaenderung der Gasphase waehrend der Druckabsenkung u.a. auch die Kenntnis des sich dabei einstellenden fluiddynamischen Ungleichgewichts in Form einer Relativgeschwindigkeit zwischen den Phasen von Bedeutung. Diese beiden Einfluesse wurden mit Hilfe der Hochgeschwindigkeitskinematographie fuer eine Wasser/Luft-Blasenstroemung untersucht. Abgesehen von der raschen Druckabsenkung aufgrund der ploetzlichen Querschnittsverengung im Spalteintritt treten keine nennenswerten Unterschiede zwischen den experimentell ermittelten und den unter der Annahme einer isothermen Zustandsaenderungen berechneten Volumenaenderung verschiedengrosser Blasen auf. Die mittlere Geschwindigkeit der Blasen unterscheidet sich dabei nicht wesentlich von der unter der Annahme einer homogenen Stroemung berechneten. (orig.)

  20. Entwicklung und Anwendung bildgebender Verfahren für die Messung der elektrischen Feldstärke mit Hilfe der Lochbrennspektroskopie

    OpenAIRE

    Balzer, Herbert

    2002-01-01

    In der Arbeit wird ein neues bildgebendes Verfahren zur optischen Sensorik der elektrischen Feldstärke vorgestellt, das auf der laserspektroskopischen Methode des stabilen spektralen Lochbrennens beruht. Hierbei erfolgt die Bestimmung der Feldstärkeverteilung durch Messung der E-Feldinduzierten Änderung der Absorption im Zentrum eines stabilen spektralen Loches, das mit einem schmalbandigen Laser in das Absorptionsspektrum einer Sensorschicht, bestehend aus dem Polymer Polyvinylbutyral dotier...

  1. Die ILO-Standards zum Schutz von Arbeitnehmerrechten : ein Begründungsversuch mit Hilfe der kantischen Position von Norman E. Bowie

    OpenAIRE

    Bäumlisberger, Damian; Brink, Alexander

    2012-01-01

    "Der Beitrag ergründet die normativen Grundlagen der Standards zum Schutz der Arbeitnehmerrechte der International Labour Organization. Auf Basis der kantischen Position des US-amerikanischen Wirtschaftsethikers Norman E. Bowie zeigen die Autoren, dass sich Bowies Theorieansatz grundsätzlich dazu eignet, die vier Kernbereiche der ILO-Aktivitäten ethisch zu fundieren. Jedoch stößt Bowies Position bei der Begründung der ILO-Standards auch auf Grenzen, die nur teilweise mittels zusätzlicher, mit...

  2. Energy-efficient production of biomethane with the aid of highly selective membranes; Energieeffiziente Gewinnung von Biomethan mit Hilfe hochselektiver Membranen

    Energy Technology Data Exchange (ETDEWEB)

    Baumgarten, Goetz; Balster, Joerg; Schnitzer, Christian [Evonik Degussa GmbH, Marl (Germany); Ungerank, Markus; Krutzler, Norbert [Evonik Fibres GmbH, Lenzing (Austria)

    2011-07-01

    Biogas is the only renewable energy source that is available continuously. It can be fed into the natural gas grid after filtering of CO2 and other constituents like water vapour and hydrogen sulfide. Membrane separation is a robust and simple technology but significant amounts of methane are lost via the membranes and must be utilized thermally on site. Against this background, Evonik developed selective membranes for biogas processing on the basis of high-performance polymers; near-complete filtering of CO2 and methane is now possible in a single compression stage. With the new membranes, a biogas processing echnology is now available that is superior in terms of energy efficiency, raw materials consumption, eco-efficiency, and robustness. This is demonstrated in a pilot plant that was commissioned in 2011. [German] Unter den erneuerbaren Energien besitzt Biogas den Vorteil einer kontinuierlichen Nutzbarkeit. Es kann nach Aufbereitung in das Erdgasnetz eingespeist werden und so vielfaeltigen Verwendungen zugefuehrt werden. Fuer die Einspeisung von Biogas in ein Erdgasnetz muessen zuvor vor allem CO{sub 2} und verschiedene Nebenbestandteile wie z.B. Wasserdampf und Schwefelwasserstoff abgetrennt werden. Der Einsatz einer auf Membranen zur Gastrennung basierenden Aufbereitung bietet hier ein robustes und einfaches Verfahren zeigte aber bisher den Nachteil, dass nennenswerte Mengen Methan ueber den sogenannten ''Schlupf'' der Membran verloren werden und unvorteilhaft thermisch vor Ort verwertet werden muessen. Vor diesem Hintergrund hat Evonik in den letzten Jahren auf Basis ihrer Hochleistungspolymere besonders selektive Membranen fuer die Biogasaufbereitung entwickelt, wodurch mit nur einem Kompressionsschritt eine nahezu vollstaendige Trennung von Kohlendioxid und Methan erreicht wird. Mit einem auf diesen neuen Membranen basierenden Prozess kann jetzt ein in Bezug auf Energie-, Einsatzstoff-, Oekoeffizienz und Robustheit ueberlegenes Biogas

  3. Balance of groundwaterstreams below dumps with the application of environmental isotopes within hydrogeological examinations. Final report; Bilanzierung von Grundwasserstroemen unter Deponien mit Hilfe von umweltisotopen-hydrologischen Analysen im Rahmen hydrogeologischer Untersuchungen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Geyh, M A; Ays, G

    1995-08-15

    Deponiesickerwaesser eine von der natuerlichen Isotopenzusammensetzung abweichende Markierung haben koennten, die vom Deponieinhalt und Isotopen-Fraktionierungen bei dessen Abbau gepraegt ist. Die Isotopenwerte des Grundwassers ober- oder unterstrom der Deponien wurden zu verschiedenen Jahreszeiten gemessen, um natuerliche und anthropogene Veraenderungen der Isotopenzusammensetzungen im Deponiebereich zu erfassen. Es wurde erwartet, dass die Mobilitaet der chemischen Kontaminanten durch physikalische, chemische und biologische Retardation gegenueber der der isotopisch markierten Wassermolekuele eingeschraenkt sei. Im Abstrom von Hausmuelldeponien koennen mit Hilfe der Sauerstoff- und Kohlenstoff-Isotopenzusammensetzung im Sickerwasser unterschiedlich stark von der Deponie beeinflusste Bereiche voneinander abgegrenzt werden. Die Kohlenstoff-Isotopenzusammensetzung kann zur Verfolgung der Phasen des chemischen Abbaus organischer Inhaltsstoffe eingesetzt werden. In Sonderabfalldeponien treten spezielle Isotopen-Effekte auf, die mit der andersartigen Zusammensetzung der Inhaltsstoffe zu erklaeren sind. (orig.)

  4. Optimisation of a bioindicator monitoring network using geostatic methods and a geographic information system; Optimierung eines Bioindikator-Messnetzes mit Hilfe geostatischer Methoden und eines Geographischen Informationssystems

    Energy Technology Data Exchange (ETDEWEB)

    Forster, E.M.

    1994-04-01

    Since 1981 the Bavarian State Authority for Environment Protection has used mosses (hypnum cupressiforme) as bioindicators for determining atmospheric background pollution. Covering all of Bavaria the monitoring network comprises more than 370 sampling sites spaced 8 km apart in urban regions and otherwise 16 km. The extremely labour-intensive and costly operation of the network led to the idea to thin it in such a way that the loss of information on regional background pollution would be kept as small as possible and remain within acceptable bounds. The geostatic methods used for this purpose permit an areal estimation of pollution load giving due consideration to local values as well as a calculation of the forecast error. The present report is divided into two sections: The first deals with the determination of spatial dependences, while the second concens the selection of sampling sites. (orig./KW) [Deutsch] Seit 1981 werden Moose (Hypnum cupressiforme) als Bioindikatoren zur Ermittlung der atmosphaerischen Hintergrundbelastung vom Bayerischen Landesamt fuer Umweltschutz eingesetzt. Das landesweite Messnetz umfasst mehr als 370 Probenahmestandorte, die 16 km bzw. in Verdichtungsregionen 8 km von einander entfernt liegen. Der erhebliche personelle und finanzielle Aufwand fuehrte zu der Ueberlegung das Messnetz mit moeglichst geringem, noch aktzeptablen Informationsverlust bezueglich der grossraeumigen Hintergrundbelastung zu reduzieren. Hierbei kamen geostatistische Methoden zum Einsatz, da sie eine flaechenhafte Schaetzung der Immissionsbelastung unter Beruecksichtigung der Umgebungswerte ermoeglichen. Zudem kann der Schaetzfehler berechnet werden. Die vorliegende Arbeit gliedert sich daher in zwei Bereiche: Einerseits das Feststellen raeumlicher Abhaengigkeiten und andererseits die Auswahl der Probenahmestandorte. (orig./KW)

  5. Mediastinal Hodgkin lymphomas in computertomography: exact CT-based volume assessment and approximations with simple geometric models; Mediastinale Hodgkin-Lymphone in der Computertomographie. Vergleich von exakter CT-gestuetzter Volumetrie und Volumenabschaetzung mit Hilfe einfacher geometrischer Modelle

    Energy Technology Data Exchange (ETDEWEB)

    Battmann, A. [Marburg Univ. (Germany). Abt. fuer Strahlendiagnostik; Dieckmann, K.; Resch, A.; Poetter, R. [Allgemeines Krankenhaus, Wien (Austria). Universitaetsklinik Strahlentherapie und Strahlenbiologie; Battmann, A. [Giessen Univ. (Germany). Zentrum fuer Pathologie

    2001-03-01

    ; results in the closest approximation compared to the true volume. In the course of clinical studies it might be helpful to apply this formula to determine the prognostic relevance of the tumor size and its development under therapy. (orig.) [German] Hintergrund: Ziel dieser Arbeit waren die Bestimmung eines moeglichst exakten Modells zur Abschaetzung der Volumina von Lymphommanifestationen im Vergleich zu computertomographisch bestimmten Tumorvolumina und eine Abschaetzung der zu erwartenden Fehlerbreite. Material und Methoden: Es wurden 30 CT-Untersuchungen mediastinaler Tumoren von an Morbus Hodgkin erkrankten Kindern fuer die Untersuchung herangezogen. Die CT-Aufnahmen wurden mittels einer an einen Framegrabber angeschlossenen CCD-Videokamera digitalisiert. Mit Hilfe der GLOBAL-LAB-Image-Software wurde die Tumormasse unter Ausschluss nicht tumorzugehoeriger Binnenstrukturen ermittelt. Im Anschluss wurden die Volumina einfacher geometrischer Figuren (Quader, Ellipsoid, Oktaeder) aus den Maximalausmessungen der Tumoren errechnet. Abschliessend erfolgte die Berechnung der Abweichung der Volumina der geometrischen Modelle von dem durch das Computerprogramm ermittelten echten Tumorvolumen. Ergebnisse: Das Volumenmodell 'Quader' ueberschaetzte das Tumorvolumen um 89 bis 268%. Das Volumenmodell 'Ellipsoid' ueberschaetzte die Tumorgroesse im Mittel um 29%. Das Modell 'Oktaeder' unterschaetzte die Tumorgroesse im Mittel um 18%. Eine Division des Quadervolumens durch 2,3 approximierte das geometrische am naechsten an das Realvolumen: Im Mittel wurde das Tumorvolumen bei Tumoren, deren Volumen 20 ml ueberschritt, um 2% ueberschaetzt. Eine suffiziente Abschaetzung von Tumoren, deren Volumen weniger als 20 ml betrug, war weder mittels dieser noch mit den uebrigen Approximationen moeglich. Schlussfolgerungen: Fuer die Bestimmung von Tumorvolumina bei mediastinalen Hodgkin-Lymphomen ab 20 ml Volumen bietet die Formel Quader /2,3 die bestmoegliche

  6. Fibre-optical measurement of the time curve of layer temperatures in a well as a result of heat injection and heat extraction; Untersuchung der zeitlichen Entwicklung von Schichttemperaturen in einer Bohrung bei Waermeaus- und Waermeeinspeisung mit Hilfe faseroptischer Temperaturmessungen

    Energy Technology Data Exchange (ETDEWEB)

    Hurtig, E; Groswig, S; Kasch, M [GESO GmbH, Jena (Germany)

    1997-12-01

    The relations between the thermal processes around a 200 m deep geothermal well and the petrographic composition were studied using the fibre optic temperature sensing method. The heat injection and heat extraction properties depend on the petrographic properties (porosity, permeability) of the individual layers. Coarse sandy, water saturated layers have good properties, silts and clays have poor properties for het storage and heat extraction. Heat transport occurs in well defined layers with good hydraulic properties and can be explained by a convective heat transport model. (orig.) [Deutsch] Mit faseroptischen Temperaturmessungen in einer Erdwaermesonde (EWS)-Bohrung wurde der Zusammenhang zwischen den thermischen Prozessen unmittelbar um die EWS und dem petrographischen Aufbau untersucht. Das Waermeein- bzw. -ausspeisevermoegen haengt von der petrographischen Ausbildung der einzelnen Schichten ab (Porositaet, Kf-Wert). Grobsandige bis kiesige, wassergesaettigte Schichten haben guenstige, schluffig-tonige unguenstige Eigenschaften fuer die Waermeaus- bzw. -einspeisung. Der wesentliche Waermetransport erfolgt in definierten geringmaechtigen Schichten mit guten hydraulischen Eigenschaften. Der Waermetransport in poroesen, wassergefuellten Schichten kann mit einem konvektiven Waermetransportmodell erklaert werden. (orig.)

  7. Optimization of radiotherapy planning for Non-Small Cell Lung Cancer (NSCLC) by {sup 18}FDG-PET; Optimierung der Bestrahlungsplanung beim nicht-kleinzelligen bronchialkarzinom (NSCLC) mit Hilfe von {sup 18}FDG-PET

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, S.; Nestle, U.; Kirsch, C.M. [Abt. fuer Nuklearmedizin, Universitaetskliniken des Saarlandes, Homburg/Saar (Germany); Walter, K. [Abt. fuer Strahlentherapie, Marienkrankenhaus Amberg (Germany); Licht, N.; Schnabel, K. [Abt. fuer Strahlentherapie, Universitaetskliniken des Saarlandes, Homburg/Saar (Germany); Ukena, D. [Innere Medizin V, Universitaetskliniken des Saarlandes, Homburg/Saar (Germany)

    2002-10-01

    Aim: In recent years, FDG-PET examinations have become more important for problems in oncology, especially in staging of bronchogenic carcinoma. In the retrospective study presented here, the influence of PET on the planning of radiotherapy for patients with non-small-cell lung cancer (NSCLC) was investigated. Methods: The study involved 39 patients with NSCLC who had been examined by PET for staging. They received radiotherapy on the basis of the anterior/posterior portals including the primary tumour and the mediastinum planned according to CT- and bronchoscopic findings. The results of the PET examination were not considered in initial radiotherapy planning. The portals were retrospectively redefined on the basis of FDG uptake considering the size and localization of the primary tumour; and FDG activities outside the mediastinal part of the portals. Results: In 15 out of 39 patients, the CT/PET-planned portals differed from the CT-planned ones. In most cases (n = 12) the CT/PET field was smaller than the CT field. The median geometric field size of the portals was 179 cm{sup 2}, after redefinition using PET 166 cm{sup 2}. In 20 patients with disturbed ventilation caused by the tumour (atelectosis, dystelectosis), a correction of the portal was suggested significantly more frequently than in the other patients (p = 0.03). Conclusions: Our results demonstrate the synergism of topographical (CT) and metabolic (FDG-PET) information, which could be helpful in planning radiotherapy of bronchial carcinoma, especially for patients with disturbed ventilation. (orig.) [German] Ziel: Die FDG-PET-Untersuchung hat in den vergangenen Jahren bei onkologischen Fragestellungen insbesondere beim Staging des Bronchialkarzinoms wachsende Bedeutung erlangt. In der vorliegenden retrospektiven Untersuchung wurde der Einfluss der PET auf die Strahlentherapieplanung bei Patienten mit non-small-cell lung cancer (NSCLC) untersucht. Methoden: Die Untersuchung umfasste 39 Patienten mit

  8. Analysis of climatically relevant processes in the troposphere using ground-based remote measuring methods (windprofiler/RASS). Final report; Analyse klimatisch relevanter Prozesse in der Troposphaere mit Hilfe bodengebundener Fernerkundungsmethoden (Windprofiler/RASS). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Steinhagen, H.; Christoph, A.; Engelbart, D.; Goersdorf, U.; Hirsch, L.; Lippmann, J.; Neisser, J.; Wergen, W.

    1995-09-01

    In the framework of the present research project the Meterological Observatory of Lindenberg (MOL) was equipped with the scientific and technical means necessary for the future operational application at the German weather service of ground-based remote sounding technologies such as `windprofiler radar`, radio-acoustic sounding system (RASS). Several case studies were used to demonstrate the multifarious possibilities of analysing mesoscale tropospheric structures by means of windprofiler radar and RASS. Besides this, further information such as mixing layer thickness and heat flux were derived from windprofiler and RASS measurements and the applied algorithms were tried on case examples. (orig./AKF) [Deutsch] Im Rahmen dieses Forschungsvorhabens sind am Meteorologischen Observatorium Lindenberg (MOL) wissenschaftliche und technische Voraussetzungen fuer eine zukuenftige operationelle Anwendung aktiver bodengebundener Fernsondierungstechnologien, wie `Windprofiler-Radar` und `Radio-Akustisches-Sondierungs-System (RASS)` im Deutschen Wetterdienst geschaffen worden. An Hand mehrerer Fallstudien wurden die vielfaeltigen Moeglichkeiten zur Analyse mesoskaliger troposphaerischer Strukturen mit Windprofiler-Radar und RASS demonstriert. Darueber hinaus wurden aus Windprofiler-/RASS-Messungen weiterfuehrende Informationen, wie Mischungsschichthoehe und Waermefluss abgeleitet und die entsprechenden Algorithmen am Fallbeispielen erprobt. (orig./AKF)

  9. Comparative evaluation of power generation systems with integrated gasification of biomass; Vergleich von Systemen zur Stromerzeugung mit integrierter Biomassevergasung

    Energy Technology Data Exchange (ETDEWEB)

    Roesch, C [Forschungszentrum Karlsruhe (Germany); Kaltschmitt, M [Stuttgart Univ. (Germany)

    1998-09-01

    Gasification of biomass followed by power generation from the lean product gas can make a significant contribution to power generation without affecting the climate or environment. It is made even more interesting by the high efficiencies and promising pollution ratings that can be achieved. To make full use of this technology, some technical problems still require solving, and some non-technical obstacles need to be removed. (orig./SR) [Deutsch] Zusammenfassend kann festgehalten werden, dass die Biomassevergasung mit anschliessender Verstromung des Schwachgases einen nennenswerten Beitrag zu einer umwelt- und klimavertraeglicheren Energiebereitstellung in Europa leisten kann. Dies gilt insbesondere vor dem Hintergrund der erreichbaren hohen Stromwirkungsgrade und der vielversprechenden Umweltkenngroessen, durch die diese Technik gekennzeichnet ist. Um die Vorteile der Biomassevergasung realisieren zu koennen, muessen jedoch noch verschiedene technische Probleme geloest und nicht technische Hindernisse aus dem Weg geraeumt werden. (orig./SR)

  10. Hinderniserkennung und -verfolgung mit einer PMD-kamera im automobil

    Science.gov (United States)

    Schamm, Thomas; Vacek, Stefan; Natroshvilli, Koba; Marius Zöllner, J.; Dillmann, Rüdiger

    Die Detektion von Hindernissen vor dem Automobil ist eine Hauptanforderung an moderne Fahrerassistenzsysteme (FAS). In dieser Arbeit wird ein System vorgestellt, das mit Hilfe einer PMDKamera (Photomischdetektor) Hindernisse auf der Fahrspur erkennt und deren relevante Parameter bestimmt. Durch die PMD-Kamera werden zunächst 3D-Tiefenbilder der Fahrzeugumwelt generiert. Nach einem initialen Filterprozess werden im Tiefenbild mit Hilfe eines Bereichswachstumsverfahrens Hindernisse gesucht. Zur Stabilisierung des Verfahrens und zur Parameterberechnung wird ein Kaiman Filter eingesetzt. Das Ergebnis ist eine Liste aller Hindernisse im Fahrbereich des Automobils.

  11. Untersuchungen zum Riechvermögen bei Patienten mit schizophrenen Störungen

    OpenAIRE

    Minovi, A; Dombrowski, T; Brüne, M; Dazert, S; Juckel, G

    2014-01-01

    Einleitung: Riechstörungen werden bei Patienten mit einer Schizophrenie in vielen Studien beschrieben. Im Rahmen einer prospektiv angelegten Studie untersuchten wir das Riechvermögen von 18 Patienten mit einer Schizophrenie im Vergleich zu einer Kontrollgruppe (n=13). Weiterhin erfolgte eine immunhistochemische Untersuchung der Riechschleimhaut bei 8 Patienten mit einer Schizophrenie.Methoden: Die Riechprüfung erfolgte mit Hilfe der erweiterten Sniffin' Sticks-Testbatterie. Nach Biopsie der...

  12. Virtuelle Auskunft mit Mehrwert : Chatbots in Bibliotheken

    OpenAIRE

    Christensen, Anne

    2008-01-01

    Die virtuelle Auskunft mit Hilfe elektronischer Informationsassistenten, auch Chatbots oder Chatterbots genannt, ist ein seit dem Jahr 2004 zu beobachtender Trend im deutschen Bibliothekswesen. Die Arbeit stellt die vier Chatbots ASKademicus, Stella, INA und das Sachsen-I vor. Am Beispiel von Stella aus der SUB Hamburg werden dann die Funktionsweise von Chatbots sowie die Anforderungen an die Konzeption dieser virtuellen Berater erläutert. Den Schwerpunkt der Arbeit bilden der Vergleich von C...

  13. Die Wirkung von Desacetylcefotaxin, einem Metaboliten von Cefotaxim, in vitro und auf die experimentelle Infektion mit Escherichia coli

    OpenAIRE

    Wirbelauer, J.; Hof, H.; Hacker, Jörg

    2009-01-01

    Die MHK-Werte von Desacetylcefotaxim gegen verschiedene, z. T. ampicillinresistente Stämme von Escherichia coH, die mit Hilfe einer Agardilutionsmethode erhoben wurden, waren höher als die von Cefotaxim und Ceftriaxon, jedoch niedriger als die von Cefoxitin. In einem Modell der systemischen Infektion der Maus mit einem plasmidtragenden, betalactamaseproduzierenden Stamm von E. coli führte die Therapie mit Desacetylcefotaxim zu einer starken Reduktion der Keime pro Leber. Im Vergleich zur Ther...

  14. Particle reduction strategies - PAREST. Evaluation of emission reduction scenarios using chemical transport calculations. Traffic model TREMOD and traffic model TREMOVE. Sub-report.; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Bewertung von Emissionsminderungsszenarien mit Hilfe chemischer Transportberechnungen. Verkehrsmodell TREMOD und Verkehrsmodell TREMOVE. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

    2013-06-15

    The calculation of transport emissions in PAREST project is made with traffic model TREMOD 4.17 (Transport Emission Model) used by the Federal Environment Agency based on the emission factors of HBEFA 2.1 (Handbook on Emission Factors for Road Traffic). For the PAREST reference scenario 2010-2020 (CLE scenario, ''current legislation'') TREMOD 4.17 was changed (TREMOD 4.17M) in such way that measures ''Introduction of Euro 5 and 6 limit levels for passenger cars and light commercial vehicles'', ''Introduction of a limit value stage Euro VI for heavy commercial vehicles'' and ''Existing truck tolls including promoting the purchase of low-emission heavy duty vehicles'' are integrated in the reference scenario and are no longer treated as an additional measure (Joerss et al., 2010). As an alternative to TREMOD 4.17M emission data sets were created for the project, in which the traffic emissions were calculated with the TREMOVE, version 2.7 (Kugler et al., 2010). TREMOVE is the traffic model used by the European Commission for the development of traffic scenarios. This report documents the differences between the immission distributions of PM10 and NO{sub 2}, resulting from the application of the European transport model. Considered are the reference 2005, which describes the current state for the year 2005 and the 2020 reference that describes the emission state in 2020 to be achieved. [German] Die Berechnung der Verkehrsemissionen erfolgt im PAREST-Projekt mit dem vom Umweltbundesamt verwendeten Verkehrsmodell TREMOD 4.17 (Transport Emission Model) auf der Grundlage der Emissionsfaktoren des HBEFA 2.1. Fuer das PAREST-Referenzszenario 2010-2020 (CLE-Szenario, ''current legislation'') wurde TREMOD 4.17 so veraendert (TREMOD 4.17M), dass die Massnahmen ''Einfuehrung der Grenzwertstufen Euro 5 und 6 fuer Pkw und leichte Nutzfahrzeuge'', &apos

  15. Characterization of structure and coagulation behaviour of refractory organic substances (ROS) using small-angle neutron scattering (SANS), small-angle x-ray scattering (SAXS) and x-ray microscopy; Charakterisierung von Struktur und Koagulationsverhalten von Refraktaeren Organischen Saeuren (ROS) mit Hilfe von Neutronenkleinwinkelstreuung (SANS), Roentgenkleinwinkelstreuung (SAXS) und Roentgenmikroskopie

    Energy Technology Data Exchange (ETDEWEB)

    Pranzas, P.K. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung

    1999-07-01

    In this work structure, coagulation and complexation behaviour of aquatic refractory organic substances (ROS) (humic and fulvic acids) were characterized. For this purpose a structural analytical system with the methods small-angle neutron scattering (SANS), small-angle x-ray scattering (SAXS) and X-ray microscopy with synchrotron radiation was developed and established. Size distributions of ROS of different origin were calculated from the scattering curves. Spherical ROS units were obtained, which coagulated by forming chainlike structures or disordered ROS agglomerates at higher concentrations. Additionally the average molecular weights of several ROS were calculated. Studies of the coagulation behaviour of ROS towards copper ions resulted in larger ROS-agglomerates besides the spherical ROS units. A linear relation between the addition of Cu{sup 2+} and the formation of the ROS-Cu{sup 2+}-agglomerates was found. With X-ray microscopy an extensive ROS-Cu{sup 2}-network structure could be registrated. For mercury and cadmium ions such coagulation interactions were not found. Investigations with X-ray microscopy of the coagulation behaviour of ROS towards the cationic surfactant DTB resulted in micel-like structures of equal size, which were spread throughout the solution. With increasing concentrations of DTB larger agglomerates up to network structures were obtained. (orig.) [German] In dieser Arbeit wurden Struktur, Koagulations- und Komplexierungsverhalten von aquatischen refraktaeren organischen Saeuren (ROS) (Humin- und Fulvinsaeuren) charakterisiert. Zu diesem Zweck wurde ein strukturanalytisches Gesamtsystem mit den Methoden Neutronenkleinwinkelstreuung (SANS), Roentgenkleinwinkelstreuung (SAXS) und Roentgenmikroskopie mit Synchrotronstrahlung entwickelt und etabliert. Fuer ROS unterschiedlicher Herkunft in Loesung wurden Groessenverteilungen aus den Streukurven berechnet. Es wurden kugelfoermige ROS-Einheiten gefunden, die bei hoeheren ROS

  16. Criterions for recognition of soil contamination for testing of soil extracts by means of biological testing - determination of ``baseline responses`` of noncontaminated soils; Kriterien zur Erkennung von Bodenkontaminationen bei der Testung von Bodenextrakten mit Hilfe biologischer Wirktests - Ermittlung der ``Grundlevel-Antworten`` unkontaminierter Boeden

    Energy Technology Data Exchange (ETDEWEB)

    Schuphan, I.; Gaipl, S.; Herlitz, E.; Schreiner, J.; Tietz, U. [Technische Hochschule Aachen (Germany). Lehrstuhl fuer Biologie 5

    1997-07-01

    One way to discover contaminations of soil in future is to use biological testing of soil extracts. For this purpose the baseline responses of the biological test systems have to be determined as a basis to distinguish between effects of natural soil components and those of contaminates. These basic level responses have been collected using water and organic extracts of 15 `uncontaminated` soils from different areas of Germany. The use of extracts for testing requires references between the soil extract, the soil itself and the test system. Starting values and the window of competence for testing are proposed. The starting value 1 SE is realized by equivalence of extract aliqouts of a defined soil amount (gramm soil equivalent, g SE) and the amount of test-(cultur)medium in g. The effect limits should be at least the double standard deviation of the blank (extract without soil components). In some test systems higher effect levels have to be fixed according to screening values of `uncontaminated` soils. If no relation can be found to the test-(culture)medium the so called window of competence has to be defined. This is necessary e.g. for the Salmonella mutagenicity test using agar as test medium. In this case screening results of `uncontaminated` soil extracts lead to a gramm Se range, the window of competence, inbetween which no natural response will be found. Extracts giving a mutation ratio (number of revertant colonies from sample extracts/number colonies from the blank) of {>=}2 were considered positively mutagenic. (orig.) [Deutsch] Es sollen kuenftig Bodenkontaminationen durch Testung der entsprechenden Bodenextrakte mit biologischen Wirktests aufgedeckt werden. Dazu muss als Voraussetzung der Grundlevel biologischer Antworten `unbelasteter` Boeden in Testsystemen bestimmt werden. Dieser wurde mit waessrigen und organischen Extrakten von ueber 15 `unbelasteten` Boeden aus verschiedenen Gegenden Deutschlands ermittelt. Die Verwendung von Extrakten fuer die

  17. Help-seeking for mental health problems from the patient perspective – A qualitative study / Das Hilfe(aufsuchen bei psychischen Gesundheitsproblemen aus der Betroffenenperspektive – Eine qualitative Studie

    Directory of Open Access Journals (Sweden)

    Tola Eva

    2015-12-01

    Full Text Available Hintergrund: Für Menschen mit psychischen Gesundheitsproblemen ist eine frühzeitige fachspezifische Betreuung wichtig, um u. a. einen chronisch-progredienten Verlauf abzuwenden. Gezielte professionell initiierte Interventionen zur Stabilisierung der psychischen Gesundheit sind jedoch nur möglich, wenn Betroffene formelle Unterstützung aufsuchen. Gründe für die geringe Inanspruchnahme formeller Angebote wurden bisher kaum aus der Perspektive der Betroffenen untersucht. Insgesamt existiert wenig Wissen zum Hilfe(aufsuchverhalten („Help-Seeking“ von Menschen mit psychischen Gesundheitsproblemen.

  18. Modellierung modularer Materialfluss-Systeme mit Hilfe von künstlichen neuronalen Netzen

    OpenAIRE

    Markwardt, Ulf

    2004-01-01

    Materialfluss-Systeme für den Stückgut-Transport auf der Basis von Stetigförderern sind meist modular aufgebaut. Das Verhalten gleichartiger Materialfluss-Elemente unterscheidet sich durch technische Parameter (z.B. geometrische Größen) und durch unterschiedliche logistische Belastungen der Elemente im System. Durch die in der Arbeit getroffenen Modellannahmen werden für die Elemente nur lokale Steuerungsregeln zugelassen und für das System Blockierfreiheit vorausgesetzt. Das Verhalten eines ...

  19. Planung von Stückgut-Umschlagbereichen mit Hilfe wissensbasierter Bewertungsmethoden

    OpenAIRE

    Freudl, Gunther

    2007-01-01

    Die sich verschärfende Wettbewerbsituation auf dem Markt und der damit steigende Konkurrenzdruck zwischen den Unternehmen erfordert ein Ausschöpfen vorhandener Rationalisierungspotentiale. Dies gilt auch für den Umschlagsektor, denn hier entstehen aufgrund der häufig noch umständlichen Handhabungsvorgänge vermeidbare Kosten. Die Automatisierung, die im innerbetrieblichen Bereich schon weit fortgeschritten, dagegen bei der Verladung bislang eher sporadisch anzutreffen ist, bietet sich als eine...

  20. Assessment of beet quality using a refractometric method. Ruebenqualitaetsbewertung mit Hilfe einer refraktometrischen Methode

    Energy Technology Data Exchange (ETDEWEB)

    Pollach, G; Hein, W; Roesner, G; Berninger, H; Kernchen, W

    1992-04-20

    We tested on 40 beet samples how far it might be possible to assess beet quality using refractometric and densimetric methods. Regarding the parameter molasses non-sugar on beet, a combination of Aluminum defecation and refractometry proved to be almost equivalent to methods based on non-sugar components. As well as for thick juice purity and molasses non-sugar on beet, formulae are given, assuming low Ca molasses, for molasses sugar and corrected sugar, respectively, on beet. By assuming a relative loss between beet and thick juice, very simple relationships were found. Practical tests in beet laboratories have not yet been carried out. (orig.)

  1. Drive of a rail locomotive using linear motors. Antrieb eines schienengebundenen Triebfahrzeuges mit Hilfe von Linearmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Kagischke, W; Steffen, U

    1977-12-08

    The purpose of the invention is to avoid the disadvantages of asynchronous linear motors, for example for need for reactive current for excitation, where driving on a normal section and driving on a branch line should be possible without losing the saving in weight on the inductor. According to the invention, the common inductor on a synchronous linear motor consists of 2 parallel packets of laminations surrounded by DC excitation windings and the secondary systems consists of unwound and spaced magnetic sections covering the two packets of laminations on the normal section. In the direction of thrust, their length extends nearly over the pole pitch of the multi-phase AC winding. According to the invetnion, this drive therefore consists of a synchronous linear motor combined into a double motor, with an external, rail shaped fixed secondary system, which has a multi-phase AC winding opposite it.

  2. Readout of delayline detectors with transient recorders; Auslese von Delaylinedetektoren mit Hilfe von Transientenrekordern

    Energy Technology Data Exchange (ETDEWEB)

    Foucar, Lutz Michael

    2008-09-18

    The task of the presented work consists in the development of software to operate the transient recorders under the conditions of a real experiment. Another task was to find a proper method of analyzing the recorded signals. Several methods were tested with simulated and real detector signals. In the first chapter the motivation to this work and some theoretical background are presented. In the second chapter methods to analyze single pulses and trains of overlapping pulses are presented. The quality of the presented algorithms is determined by signals created artificially in software. It is shown that the best temporal resolution - for case of non-overlapping pulses - is obtained with a pulse fit. With this method a resolution of approximately 50 ps is achieved. In order to disentangling overlapping pulses a minimum distance in time between the pulses of at least 5 ns to 7 ns peak to peak is necessary. The third chapter shows an application of the new recording system where results of the new recording method are compared to those obtained with the traditional method. The next chapter presents another experiment in which an even larger amount of fragments had to be detected. In order to cope with this requirement further criteria to assign the measured signal to its originating particle is presented. In this chapter results from photo ionization of helium and neon are shown. The next chapter consist of another application of the methods developed in this work on a real experiment: the reaction examined leads in many cases to two particles that need to be detected within a time of only 30 ns. It turns out that the dead time for real signals is comparable to that of simulated signals. The algorithms cannot accurately determine the timing of two signals that are separated in time by less than 10 ns. On the basis of the pulse height distribution it can be shown that the used detector had smaller efficiency at its center. In the last chapter the quality of the different methods of the single pulse analysis is examined on the basis of real signals. (orig.)

  3. Die Auswertung heterogener Textdokumente mit Hilfe des Computerprogramms NUD*IST

    OpenAIRE

    Plaß, Christine; Schetsche, Michael

    2000-01-01

    Anhand eines aktuellen Forschungsprojekts wird der Nutzen des Computerprogramms NUD*IST für die qualitative Dokumentenanalyse erörtert. Unser Projekt untersucht die gesellschaftliche Bewertung von spektakulären Straftaten. Dazu wurden Dokumente aus dem gesamten 20. Jahrhundert erhoben, digitalisiert und unter Einsatz von NUD*IST ausgewertet. Da öffentliche und fachliche Diskurse untersucht werden, ist das Datenmaterial des Projekts außerordentlich heterogen: fachwissenschaftliche Publikatione...

  4. Mit kokkeri

    DEFF Research Database (Denmark)

    Ejlersen, Søren; Lorang, Louisa

    MIT kokkeri er resultatet af et samarbejde mellem Komiteen for Sundhedsoplysning, Institut for Uddannelse og Pædagogik/Aarhus Universitet og Haver til Maver. Projektet støttes af Nordea-fonden. Bag kogebogens mange opskrifter står en række erfarne madeksperter bestående af Søren Ejlersen, Louisa...

  5. Additive Fertigungsverfahren mit Praxisbeispielen: Vortrag gehalten beim Praxisforum 3D-Druck, 3D-Druck in Produktentwicklung und Fertigung - Anwendungen und Potenziale, 24.03.15, Landshut

    OpenAIRE

    Seidel, Christian

    2015-01-01

    Für die Additive Fertigung von Metallen und Kunststoffen gibt es verschiedenen Methoden und Funktionsprinzipien. Die Potenziale liegen unter anderem in der Formgebungsfreiheit, der Ressourceneffizienz und der Personalisierung. In den nächsten Jahren ist mit einem weiteren Rückgang der Kosten pro hergestelltem Volumen zu rechnen. Mit Hilfe der Bionik wird die Natur als Vorbild abstrahiert und findet Einsatz bei technischen Anwendungen. Als Beispiele für Additive Fertigungsverfahren sind der fu...

  6. Geschmackspapillendichte und Geschmackswahrnehmung bei Jugendlichen mit Essstörungen und einer gesunden Kontrollgruppe

    OpenAIRE

    Kaltenhofer, Alice

    2009-01-01

    Fragestellung Die Schmeckwahrnehmung wird u.a. über Lernprozesse, kognitive Vorgänge, genetische und biochemische Faktoren reguliert. Ess- und Diätverhalten werden durch sie beeinflusst. Den anatomisch und physiologisch ersten Abschnitt der Schmeckwahrnehmung bilden die fungiformen Geschmackspapillen. In den Geschmackspapillen liegen die Geschmacksknopsen, mit deren Hilfe die Schmeckstoffe aufgenommen und in Form von Aktionspotentialen zum Thalamus, dem limbischen System,dem Gyrus postzentral...

  7. Biomass

    Science.gov (United States)

    Bernard R. Parresol

    2001-01-01

    Biomass, the contraction for biological mass, is the amount of living material provided by a given area or volume of the earth's surface, whether terrestrial or aquatic. Biomass is important for commercial uses (e.g., fuel and fiber) and for national development planning, as well as for scientific studies of ecosystem productivity, energy and nutrient flows, and...

  8. Out of Area. Humanitäre Hilfe der Bundeswehr im Ausland (1959–1991

    Directory of Open Access Journals (Sweden)

    Patrick Merziger

    2018-04-01

    Full Text Available The end of the Cold War is generally regarded as a prelude to the German armed forces’ worldwide involvement, beginning in 1992 with the UN missions in Somalia and Cambodia. This overlooks the fact that from 1959 onwards, the Bundeswehr took part in at least 135 relief operations abroad, both inside NATO territory and beyond, in places including Ethiopia, Bangladesh and Peru. The article examines the reasons for this remarkable effort and illustrates the logic behind the involvement. The Bundeswehr itself emphasised service to humanity as its central motivation. But from a military-operational perspective, it is clear that the relief actions were attractive because they resembled a ›real military mission‹. For the West German army during the Cold War, they provided good opportunities to test its readiness, advance its skills and develop geographical orientation. In public and legal discussions humanitarian aid was regarded as selfless, good and therefore unproblematic, so relief operations proved to be a vehicle for preparing the German armed forces for an out-of-area deployment. * * * Das Ende des Kalten Krieges gilt gemeinhin als Auftakt des Engagements der Bundeswehr in aller Welt, beginnend mit den UN-Missionen in Somalia und Kambodscha 1992. Übersehen wird dabei, dass sich die Bundeswehr schon seit 1959 mit großem Aufwand an mindestens 135 Hilfsaktionen im Ausland beteiligt hatte – auf dem Gebiet der NATO, aber auch darüber hinaus, wie etwa in Äthiopien, Bangladesch oder Peru. Der Beitrag fragt nach den Gründen für den bemerkenswerten Einsatz und stellt dar, welche Logik hinter dieser Beteiligung stand. Die Bundeswehr selbst betonte als zentrales Motiv den Dienst an der Menschlichkeit. Aus einer militärisch-operationellen Perspektive wird aber deutlich, dass die Hilfsaktionen attraktiv waren, weil sie einem »echten Einsatz« glichen. Für die westdeutsche Armee im Kalten Krieg boten sie gute Möglichkeiten, ihre Bereitschaft

  9. Particle Reduction Strategies - PAREST. Evaluation of emission reduction scenarios using chemical transport calculations. NO{sub 2}- and O{sub 3} reduction potentials of package of measures for further reduction of immissions in Germany; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Bewertung von Emissionsminderungsszenarien mit Hilfe chemischer Transportberechnungen. NO{sub 2}- und O{sub 3}-Minderungspotenziale von Massnahmenpaketen zur weiteren Reduzierung der Immissionen in Deutschland. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

    2013-06-15

    This report documents the effects of additional emission control measures the NO{sub 2}- and ozone-air quality in Germany (PM = particulate matter). The immission effects of the planned measures were calculated with the Chemistry-Aerosol-Transport Model REM CALGRID (RCG). [German] Dieser Bericht dokumentiert die Auswirkungen zusaetzlicher emissionsmindernder Massnahmen auf die NO{sub 2}- und die Ozon-Luftqualitaet in Deutschland. Die immissionsseitigen Auswirkungen der geplanten Massnahmen wurden auf der Basis von Berechnungen mit dem Chemie- Aerosol-Transportmodell REM-CALGRID (RCG) bestimmt. Grundlage der Szenarienrechnungen sind die im Rahmen des F and E-Vorhabens entwickelten Emissionsabschaetzungen, die die Aenderung der Emissionen aufgrund von technischen oder nicht-technischen Massnahmen beschreiben. Die den Berechnungen zugrunde liegende horizontale Aufloesung betraegt 0.125 Laenge und 0.0625 Breite oder circa 7 km x 8 km. Das meteorologische Referenzjahr ist 2005.

  10. Particle reduction strategies - PAREST. Evaluation of emission reduction scenarios using chemical transport calculations. PM10- and PM2.5-reduction potentials by package of measures for further immission reduction in Germany. Sub-report.; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Bewertung von Emissionsminderungsszenarien mit Hilfe chemischer Transportberechnungen. PM10- und PM2,5-Minderungspotenziale von Massnahmenpaketen zur weiteren Reduzierung der Immissionen in Deutschland. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

    2013-06-15

    This report documents the effects of additional emission control measures the PM10 and PM2.5 air quality in Germany (PM = particulate matter). The immission effects of the planned measures were calculated with the Chemistry-Aerosol-Transport Model REM CALGRID (RCG). [German] Dieser Bericht dokumentiert die Auswirkungen zusaetzlicher emissionsmindernder Massnahmen auf die PM10 und PM2.5-Luftqualitaet in Deutschland. Die immissionsseitigen Auswirkungen der geplanten Massnahmen wurden auf der Basis von Berechnungen mit dem Chemie-Aerosol-Transportmodell REM-CALGRID (RCG) bestimmt. Grundlage der Szenarienrechnungen sind die im Rahmen des F and E-Vorhabens entwickelten Emissionsabschaetzungen, die die Aenderung der Emissionen aufgrund von technischen oder nicht-technischen Massnahmen beschreiben. Die den Berechnungen zugrunde liegende horizontale Aufloesung betraegt 0.125 Laenge und 0.0625 Breite oder circa 7 km x 8 km. Das meteorologische Referenzjahr ist 2005.

  11. Biomass utilisation for combined heat and power generation: Status and perspectives for rural regions. Guelzow expert discussions; Energetische Nutzung von Biomasse mit Kraft-Waerme-Kopplung: Stand der Technik und Perspektiven fuer den laendlichen Raum. Guelzower Fachgespraeche

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Biomass has a high potential but biomass utilisation technologies have not yet reached sufficient maturity for a general breakthrough on the market. Political boundary conditions alone are not sufficient if technical conversion processes are neglected. For the time being, the potential of biomass can not be utilised.

  12. Decentralised power generation using solid biomass - Know-how on combined heat and power generation for investors; Dezentrale Stromerzeugung mit Feststoffbiomasse

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, M.; Gaegauf, Ch.; Sattler, M.

    2007-01-15

    This comprehensive report made by the Centre of Appropriate Technology and Social Ecology in Langenbruck, Switzerland presents a summary of know-how for investors on combined heat and power generation using solid biomass in installations with an electrical rating of up to one megawatt. Topics covered include a review of the reasons for using biomass to generate electricity - with the results of an analysis of potential in Switzerland and the European Union - and of economic assessment methods for the choice of technology and manufacturers. A SWOT (strengths, weaknesses, opportunities and threats) analysis of technologies is presented and existing biomass-fired installations in Switzerland are listed. A comparison with centrally-refined combustibles is presented and examples of cost and profitability calculations are given. Finally technological background information is presented, including information on 'forgotten' technologies.

  13. Possibilities of transport with monorails; Moeglichkeiten des Transports mit Einschienenhaengebahnen

    Energy Technology Data Exchange (ETDEWEB)

    Bolz, P. [Deutsche Montan Technologie GmbH, Bochum (Germany)

    2001-08-02

    The safety limits of transport by monorails were determined within the framework of a test project. The safety-related components of the system, in particular the rail system with its suspensions and the drive and braking system, were investigated for normal and heavy load transport. In addition to operational measurements for actual stressing of the components tests were conducted on test benches to determine the dynamic strength. The concept of a new forward-looking monorail system with greater safety was subsequently developed with the aid of the results obtained. The compatibility with the previous components was ensured. Compared to the determined load capacity limits a development requirement for monorail suspension anchor bolts, diesel- and battery-operated trolleys as well as braking trolleys for ropeways were derived. The other components are already adequately dimensioned. (orig.) [German] Im Rahmen eines Untersuchungsvorhabens wurden die sicherheitlichen Grenzen des Transports mit EHB ermittelt. Die sicherheitsrelevanten Bauteile des Systems, insbesondere das Schienensystem mit seinen Aufhaengungen sowie das Antriebs- und Bremssystem, wurden fuer den Normal- und den Schwerlasttransport untersucht. Neben Betriebsmessungen zur tatsaechlichen Beanspruchung der Bauteile erfolgten Pruefstandsuntersuchungen zur dynamischen Festigkeit. Mit Hilfe der gewonnenen Ergebnisse wurde anschliessend das Konzept fuer ein neues, zukunftsorientiertes EHB-System mit erhoehter Sicherheit erarbeitet. Die Kompatibilitaet zu den bisherigen Bauteilen wurde dabei gewaehrleistet. Im Vergleich zu den ermittelten Belastbarkeitsgrenzen wurde daraus ein Entwicklungsbedarf bei EHB-Aufhaengeankern, Diesel- und Batteriekatzen sowie Bremskatzen fuer Seilbahnen abgeleitet. Die uebrigen Bauteile sind bereits jetzt ausreichend bemessen. (orig.)

  14. Clean heating with wood. An electrostatic separator reduces particulate matter emissions from biomass boilers; Sauber heizen mit Holz. Ein elektrostatischer Abscheider senkt die Feinstaub-Emissionen von Biomassekesseln

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Franz

    2016-08-01

    Despite considerable advances in firing technology, harmful particulate matter is produced when wood is combusted. Electrostatic precipitators, however, filter up to 90 per cent of particulate emissions from biomass boilers. These therefore enable wood burners to use a wider range of fuel and still meet the tightened requirements of Germany's 1st Ordinance on the Implementation of the Federal Immission Control Act. The major advantage: Both new and old heating plants can benefit from the new system.

  15. Material stream management of biomass wastes for the optimization of organic wastes utilization; Stoffstrommanagement von Biomasseabfaellen mit dem Ziel der Optimierung der Verwertung organischer Abfaelle

    Energy Technology Data Exchange (ETDEWEB)

    Knappe, Florian; Boess, Andreas; Fehrenbach, Horst; Giegrich, Juergen; Vogt, Regine [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany); Dehoust, Guenter; Schueler, Doris; Wiegmann, Kirsten; Fritsche, Uwe [Oeko-Institut, Inst. fuer Angewandte Oekologie, Darmstadt (Germany)

    2007-02-15

    The effective use of the valuable substances found in waste materials can make an important contribution to climate protection and the conservation of fossil and mineral resources. In order to harness the potential contribution of biomass waste streams, it is necessary to consider the potential of the waste in connection with that of the total biomass. In this project, relevant biogenous material streams in the forestry, the agriculture as well as in several industries are studied, and their optimization potentials are illustrated. Scenarios are then developed, while taking various other environmental impacts into considerations, to explore possible optimized utilization of biomass streams and biomass waste substances for the future. Straw that is not needed for humus production and currently left on the field can be used for its energy content. The realisation of this potential would be significant contribution towards climate protection. The energetic use of liquid manure without negatively influencing its application as commercial fertilizer can also be similarly successful because of its large volume. The results of our study also support an increased energetic use of saw residues as fuel (in form of pellets) in small furnaces. For household organic wastes, the report suggests the fermentation with optimized energy use and intensified marketing of the aerobically treated compost as peat substitution. While for waste cooking fat that is currently disposed in the residual waste, a separate collection and direct use in motors that are used as combined heat and power generation are recommended. For meat and bone meal and communal sludge that are not being used substantial currently or in the future, phosphorus can be recovered with promising success from the ash produced when the waste is burnt in mono incinerators. These technical options should however be tested against disposal standard. (orig.)

  16. Mathematical modelling of the performance of hydrodynamic couplings using hybrid models; Mathematische Modellierung des Betriebsverhaltens hydrodynamischer Kupplungen mit hybriden Modellansaetzen

    Energy Technology Data Exchange (ETDEWEB)

    Jaschke, P.

    2000-02-01

    Mathematical models of the dynamic performance of hydrodynamic couplings are developed using hybrid modelling, i.e. a combination of analytical physical modelling and black box identification. The models developed were verified by measurements on a model powertrain. [German] In dieser Arbeit werden mit Hilfe der hybriden Modellierung mathematische Modelle zur Beschreibung des dynamischen Betriebsverhaltens hydrodynamischer Kupplungen ermittelt. Die Hybride Modellierung stellt eine Kombination der analytisch physikalischen Modellierung und der Black-Box-Identifikation dar. Diese Modellierungsart ist ausgewaehlt worden, um die Vorteile der analytisch physikalischen Modellierung und der Black-Box-Identifikation hydrodynamischer Kupplungen zu verbinden und deren Nachteile gering zu halten. Auf dieser Basis ist eine Vorgehensweise vorgestellt worden, die die Ermittlung der Modelle mit wenig Aufwand ermoeglicht. Mit Hilfe der Modelltheorie wird gezeigt, wie die ermittelten mathematischen Modelle zur Simulation des dynamischen Betriebsverhaltens geometrisch aehnlicher Kupplungen unterschiedlicher Baugroessen verwendet werden koennen. Darueber hinaus wird dargelegt, wie die ermittelten Modelle mit Modellen anderer Antriebsstrangelemente gekoppelt werden koennen, um Antriebsstrangsimulationen zu ermoeglichen. Verifikationsmessungen an einem Modellantriebsstrang verdeutlichen die Guete und Verwendbarkeit der mathematischen Modelle. (orig.)

  17. Biological indication with the aid of submerged vegetation - potential and limits; Bioindikation mit Hilfe Hoeherer Wasserpflanzen - Moeglichkeiten und Grenzen

    Energy Technology Data Exchange (ETDEWEB)

    Schuetz, W.

    1991-12-31

    From 1986 to 1989 the submerged vegetation of the running waters of the `Schwaebische Alb` and `Oberschwaben` were investigated. The qualitative and quantitative distribution of macrophytes depends in the first place on the occurence of extreme discharges overlaying other factors influencing the distribution of macrophytes (trophical state). The effects of increasing eutrophication can be proved, too, by reconstructing the increase resp. decrease of suitable indicator-species [Groenlandia densa (L.) FOURR.] within a larger area. The effects of water-regulation measures with ensueing eutrophication can be demonstrated in the specific case of the submerged vegetation of the Danube river and the `suedbadische Oberrheinaue`. (orig.)

  18. Marketing mit Youtube

    OpenAIRE

    Nufer, Gerd; Kaps, Anne

    2017-01-01

    Die Video-Plattform Youtube ist eine der meistbesuchten Webseiten weltweit. Youtube-Stars erreichen mit ihren Videos große Zuschauergruppen und können als Multiplikatoren für Werbebotschaften dienen. Sie sind oftmals Meinungsführer, denen hohes Vertrauen entgegengebracht wird, weshalb sie sich sehr gut für Influencer-Marketing eignen. Marketing mit Youtube ermöglicht eine offene, mehrwegige, schnelle und kostengünstige Kommunikation mit Kunden, insbesondere jüngeren. Unternehmen können sich d...

  19. MITS machine operations

    International Nuclear Information System (INIS)

    Flinchem, J.

    1980-01-01

    This document contains procedures which apply to operations performed on individual P-1c machines in the Machine Interface Test System (MITS) at AiResearch Manufacturing Company's Torrance, California Facility

  20. Kommunikation mit Mitarbeitern

    Science.gov (United States)

    Spychala, Anne; Fleischmann, Jürgen

    Kommunikation ist der Austausch von Nachrichten und Informationen zwischen Mitarbeitern eines Unternehmens (O'Hair et al. 1997). Dieser Austausch kann persönlich, aber z.B. auch per Telefon, E-Mail oder durch Computersysteme erfolgen. In diesem Kapitel betrachten wir die persönliche Kommunikation zwischen Vorgesetzten und Mitarbeitern. Zur persönlichen Kommunikation mit Mitarbeitern zählen sowohl formelle Gespräche mit Mitarbeitern als auch eher informelle Gespräche zwischen Tür und Angel. Die Gespräche können dabei mit einzelnen Mitarbeitern (z.B. jährliches Mitarbeitergespräch) oder mit Gruppen von Mitarbeitern (z.B. regelmäßige Projekt- oder Teambesprechungen) stattfinden.

  1. Experimental investigation and optimisation of burner systems for glass melting ends with regenerative air preheating. Final report; Experimentelle Untersuchung und Optimierung von Brennersystemen fuer Glasschmelzwannen mit regenerativer Luftvorwaermung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Scherello, A.; Flamme, M.; Kremer, H.

    2000-02-15

    The project comprised experiments on burner systems for glass melting ends with regenerative air preheating for the purpose of optimisation. The experimental set-up was to reflect realistic conditions. In the first stage of the investigations, modern burner systems were installed in a GWI test facility and investigated. [German] Ziel des oben genannten Forschungsvorhabens war die Durchfuehrung experimenteller Untersuchungen von Brennersystemen fuer Glasschmelzwannen mit regenerativer Luftvorwaermung sowie deren Optimierung. Dazu war es notwendig, einen experimentellen Aufbau zu realisieren, mit dessen Hilfe die Stroemungs-, Mischungs- und Umsetzungsphaenomene von Glasschmelzoefen realistisch nachgestellt und aussagekraeftige Untersuchungen durchgefuehrt werden koennen. In einem ersten Untersuchungsschritt wurden moderne Brennerlanzen an der GWI-Versuchsanlage installiert und untersucht. (orig.)

  2. Particle reduction strategies - PAREST. Evaluation of emission reduction scenarios using chemical transport calculations. PM10- and NO{sub 2}-immission contributions in Germany. Wood combustion in small combustion systems; installations of the 13th and 17th BImSchV (Federal Immission Control Act). Sub-report.; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Bewertung von Emissionsminderungsszenarien mit Hilfe chemischer Transportberechnungen. PM10- und NO{sub 2}-Immissionsbeitraege in Deutschland. Holzverbrennung in Kleinfeuerungsanlagen, Anlagen der 13. und 17. BImSchV. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

    2013-06-15

    This report was prepared within the research project ''Particle reduction strategies - PAREST.'' In this paper with the chemical transport model REM CALGRID following questions were investigated: 1 What is the contribution of the wood-fired small combustion plants in Germany to the PM10- and NO {sub 2}-concentrations? 2 What is the contribution of the 13th and 17th BlmSchV covered installations to the PM10 and NO{sub 2} concentrations in Germany? [German] Der vorliegende Bericht wurde im Rahmen des Forschungs- und Entwicklungsvorhabens ''Strategien zur Verminderung der Feinstaubbelastung'' erstellt. In dem Beitrag werden mit dem chemischen Transportmodell REM-CALGRID folgende Fragestellungen untersucht: 1. Wie hoch ist der Beitrag der mit Holz beheizten Kleinfeuerungsanlagen in Deutschland zu den PM10- und den NO{sub 2}-Konzentrationen? 2. Wie hoch ist der Beitrag der von der 13. und 17. BImSchV erfassten Anlagen zu den PM10-und NO-2-Konzentrationen in Deutschland?.

  3. Mit anderen Augen

    DEFF Research Database (Denmark)

    Ydesen, Christian; Høberg, Per

    2010-01-01

    The article 'Mit anderen Augen' focuses on the debate about the state-church relationship in the German Democratic Republic (GDR). Starting from the immediate assumption that a protestant church and a socialist, Marxist-Leninist state were irreconcilable in the construction of a new society...

  4. Pollutant monitoring in the Elbe river with the aid of the zebra mussel. A classification system - 1990-1997; Schadstoffueberwachung der Elbe mit der Dreikantmuschel. Ein Klassifizierungssystem - 1990-1997

    Energy Technology Data Exchange (ETDEWEB)

    Krieg, H.J. [Hydrobiologische Untersuchungen und Gutachten - HUuG, Tangstedt (Germany); Gaumert, T. [comps.] [Wasserguetestelle Elbe, Hamburg (Germany)

    1998-04-01

    The pollutant burden of the Elbe river can now be assessed more accurately with the aid of a new classification system based on pollutant accumulation in the soft tissue of the zebra mussel (Dreissena polymorpha), which provided the basis for a 7-stage pollution scale for individual substances. This closes a gap in pollution analysis of the Elbe river and makes statements on pollutant levels more efficient. [Deutsch] Die Schadstoffbelastung der Elbe kann mit Hilfe eines neuen und hier erstmalig vorgestellten Klassifizierungssystems besser als bisher bewertet werden. Die Auswertung angereicherter Schadstoffgehalte im Weichkoerper der in den Elbe-Messstationen gehaelterten Dreikantmuschel Dreissena polymorpha fuehrte zur Entwicklung einer siebenstufigen Belastungs-Skala fuer einzelne Substanzen. Mit diesem Verfahren kann somit ein offener Bereich bei der Bewertung der Schadstoffbelastung der Elbe geschlossen und die Gewaesserueberwachung mit einer hoeheren Aussagekraft betrieben werden. (orig.)

  5. High-speed pyrolysis with circulating heat carriers; Schnell-Pyrolyse mit zirkulierenden Waermetraegern

    Energy Technology Data Exchange (ETDEWEB)

    Schmalfeld, J; Albrecht, J; Solmaz, S; Zentner, U [Lurgi Energie und Umwelt GmbH, Frankfurt am Main (Germany)

    1998-09-01

    Yields and product compositions of pyrolysis reactions depend on the mode of heat supply, the temperature level, and the time of residue at reaction temperature. Using hot circulating granular materials mixed with solid or liquid materials (e.g. biogenic or hydrocarbon-rich residues and waste materials or refinery residues), the following important processes can be investigated: Separation of pyrolysis reaction and heat supply - accurate, optimal temperature levels for pyrolysis, e.g. between 5000 and 850 degrees centigrade - undiluted, unmixed pyrolysis gas - short times of residue of the pyrolysis gas for suppression of secondary reactions. (orig.) [Deutsch] Ausbeuten und Produktzusammensetzung von Pyrolyse-Reaktionen werden weitestgehend durch die Art und Weise der Waermezufuhr, das Temperaturniveau und die Verweilzeit bei Reaktionstemperatur bestimmt. Mit Hilfe des Prinzips heisser, umlaufender, koerniger Waermetraeger in Vermischung - fuer die Pyrolyse-Reaktion - mit festen oder fluessigen Einsatzstoffen (z.B. biogene oder kohlenwasserstoffreiche Rest-/Abfallstoffe, Raffinerie-Rueckstaende) lassen sich folgende wichtige, haeufig gewuenschte Vorgaenge realisieren: - Trennung von Pyrolyse-Reaktion und Waermeversorgung - Temperaturgenaue Pyrolyse-Reaktion auf gewuenschtem, optimalem Niveau waehlbar zwischen z.B. 5000 C und 850 C - Erhalt eines unverduennten, unvermischten Pyrolysegases - Kurze Verweilzeiten des Pyrolysegases zur Unterdrueckung von Sekundaerreaktionen. (orig.)

  6. Die Last mit der Lust

    Directory of Open Access Journals (Sweden)

    Lutz Sauerteig

    2004-03-01

    Full Text Available Robert Jütte legt mit Lust ohne Last eine umfassende, allgemeinverständliche und spannend zu lesende Geschichte der Empfängnisverhütung von der Antike bis in die unmittelbare Gegenwart vor.

  7. Spillerum og mit eget rum

    DEFF Research Database (Denmark)

    2014-01-01

    Undervisningsmaterialet Spillerum udviklet som APP til Ipad med interaktive muligheder. Spillerum som APP - et interaktivt undervisningsmateriale, hvor man ud over at bruge det originale materiale Spillerum elektronisk kan skabe sit eget billedbaserede rum "Mit eget rum" som udgangspunkt for dialog....

  8. Kleben von Kunststoff mit Metall

    CERN Document Server

    Brockmann, W; Käufer, H

    1989-01-01

    Das Buch behandelt das Kleben von Kunststoffen mit Metallen in einer fur den Praktiker verstandlichen und umsetzbaren Form. Es leitet zu Klebeverfahren an, die optimale Ergebnisse hinsichtlich Qualitat, Dauerhaftigkeit und Wirtschaftlichkeit liefern.

  9. MIT-CSR XIS Project

    Science.gov (United States)

    1998-01-01

    This report outlines the proposers' progress toward MIT's contribution to the X-Ray Imaging Spectrometer (XIS) experiment on the Japanese ASTRO-E mission. The report discusses electrical system design, mechanical system design, and ground support equipment.

  10. Investigations on the photoelectrochemical decomposition of water using solar radiation (photolysis). Final report. Untersuchung zur photoelektrochemischen Wasserzersetzung mit Hilfe von Sonnenenergie (Photolyse). Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schindler, R N

    1985-01-01

    Laboratory experiments were carried out on illuminated TiO/sub 2/-electrodes to examine the possibility of conversion and storage of solar radiation in a chemical system especially as hydrogen from the photolysis of water. Methods of preparation of new photosensitive semiconducting electrodes were studied. For the preparation of the electrodes various technique of vapour deposition and surface treatment including ion implantation were employed. The thin-layered electrodes were characterized by absorption spectroscopy and by electrochemical methods. The results of the investigations are published in 29 original contributions quoted as references and in 3 PhD thesis of co-workers. Using solar radiation only small yields of hydrogen were obtained in the photolysis of water on TiO/sub 2/ electrodes. Nevertheless it is concluded that photoelectrochemistry possesses a high potential in photocatalysis and in investigations of photooxidation processes occurring in the atmosphere. (orig.) With 36 refs., 2 tabs., 56 figs.

  11. Early evaluation of website design using the Maus-O-Meter; Fruehzeitige Evaluation von Websitegestaltung mit Hilfe des Maus-O-Meters

    Energy Technology Data Exchange (ETDEWEB)

    Bruder, R.; Noss, C. [Universitaet Essen (Germany). Fachgebiet Ergonomie im Design

    2002-07-01

    Now after ten years the World Wide Web and E-Mail are the most popular internet service. The amount of users grew extremely fast, and is still growing. Meanwhile the web became more and more important for companies and public facilities. While in the early years the web was used mostly as a digital business card, many websites today are stuffed with complex functionalities. They are developed as web-based applications for online bookshops, online banking, online timetable for the public transport etc. Thus, a constant growing bulk of heterogeneous users has to deal with websites becoming more and more complex. Now the time starts for the designers and developers to create websites, which are easy to use. But how can this usability be measured? Unfortunately, there are no suitable tools to check the usability of a website in a very early stage of development. Webdesigners and developers have to trust in their experience and intuition. Conventional ergonomic measuring methods can not easily be transferred to the requirements of the world wide web. For this reason the Maus-O-Meter has been developed. This method is able to record the interaction of users with a website. For analysis the Maus-O-Meter reconstructs the path of users through the website, to show which part of the site the user has seen at what time. To complete the reconstruction, Maus-O-Meter draws mouse tracks and mouse clicks. (orig.)

  12. Investigation into magnetic correlations in cuprates by means of neutron scattering experiments; Untersuchung magnetischer Korrelationen in Kupraten mit Hilfe von Neutronenstreuexperimenten

    Energy Technology Data Exchange (ETDEWEB)

    Henggeler, W [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-12-31

    Cuprate materials containing rare earth ions were studied. The main experimental tools were inelastic and elastic neutron scattering techniques. Some {mu}SR, susceptibility and specific heat measurements were also performed. One aim was to learn more about the crystalline environment of the rare earth ions in these substances via the crystalline electric field (CEF) interaction. Furthermore, we investigated the correlations of the magnetic moments of these ions by a determination of the dispersion of the CEF excitations. The theory that is essential for the understanding of this work is outlined. The instruments on which the experiments have been performed are presented. We show the measurements of the CEF excitations of Ho{sup 3+} in Y{sub 0.99}Ho{sub 0.01}Ba{sub 2}Cu{sub 3}O{sub 6+x}. The Ho ions represent ideal local probes to examine changes of the charge distribution in the copper oxide planes upon doping with oxygen. To prevent any influence of the Ho-Ho exchange interaction on the CEF excitations we performed the experiments on substances containing only one percent of Ho. Our results show that for all the intermediately doped compounds the charge distribution is very inhomogeneous. For all the highly doped samples we observe a line asymmetry for which several possible origins are discussed. We examine the Pr{sup 3+} CEF excitations in the Pr{sub 2-x}Ce{sub x}CuO{sub 4(-{delta})} (0{<=}x{<=}0.2)-substances. Our results show a coexistence of different environments of the Pr ions in all the doped compounds. We try to describe these inhomogeneities with the help of a model. We used the {mu}SR-technique on some of these samples in order to learn more about the oxygen reduction process. Finally, we performed inelastic neutron scattering experiments on Pr{sub 1.86}Ce{sub 0.14}CuO{sub 4} single crystal, which allowed a direct determination of the coupling constants between the magnetic moments of the Pr ions. (author) figs., tabs., 93 refs.

  13. Development of a model for optimisation of a power plant mix by means of evolution strategy; Modellentwicklung zur Kraftwerksparkoptimierung mit Hilfe von Evolutionsstrategien

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Hans

    2008-09-17

    Within the scope of this thesis a model based on evolution strategy is depicted, which optimises the upgrade of an existing power plant mix. In doing so the optimisation problem is divided in two sections covering the building of new power plants as well as their ideal usage within the persisting power plant mix. The building of new power plants is optimised by means of mutations, while their ideal usage is specified by a heuristic classification according to the merit order of the power plant mix. By applying a residual yearly load curve the consumer load can be modelled, incorporating the impact of fluctuating power generation and its probability of occurrence. Power plant failures and the duration of revisions are adequately considered by means of a power reduction factor. The optimisation furthermore accommodates a limiting threshold for yearly carbon dioxide emissions as well as a premature decommissioning of power plants. (orig.)

  14. Matching of traction control systems for all-wheel devices by means of a virtual driver model; Abstimmung von Traktionsregelsystemen fuer Allradfahrzeuge mit Hilfe eines virtuellen Fahrermodells

    Energy Technology Data Exchange (ETDEWEB)

    Vockenhuber, Mario [MAGNA Powertrain AG und Co. KG, Lannach (Austria); Fischer, Rainer [Magna Powertrain, Engineering Center Steyr, St. Valentin (Austria); Butz, Torsten; Ehmann, Martin [TESIS DYNAware GmbH, Muenchen (Germany)

    2011-07-01

    Simulation of the full vehicle dynamics is an efficient means for function development and validation as well as calibration of traction control systems for four-wheel drive vehicles. Simulation models for vehicle, control systems and environment with a suitable level of detail are used to investigate different layout variants of the drivetrain on various tracks. This contribution outlines a driver model which enables considering the influence of different driving styles. Various human driver types are depicted by specific controller parameterization or definition of reference values for longitudinal and lateral vehicle guidance. Thus, apart from the calibration of control system electronics also realistic load spectra for durability computations of mechanical components can be determined via simulation. (orig.)

  15. Study of the structure of the QCD vacuum by means of overlap fermions; Untersuchung der Struktur des QCD-Vakuums mit Hilfe von Overlap-Fermionen

    Energy Technology Data Exchange (ETDEWEB)

    Weinberg, Volker

    2008-12-15

    In this thesis the structure of the QCD vacuum and the nature of the chiral phase transition were studied by means of overlap fermions. The main topic of the theiss lies in the study of the infrared long-range aspects shown by the low-lying eigenmodes of the overlap operator. For the characterization of the structure and dimension of an arbitray density embedded in the four-dimensional space-time diverse analysis tools were developed. These are applied both at low temperature (T=0) in the valence-quark approximation of QCD and in the environment of the high-temperature phase transition of the full QCD for the description of the structure of the modes and the topological density, as well as for the analysis of the local self-duality of the basing gauge fields.

  16. Ethanol production from cellulose, lactose and xylose using yeasts and enzymes. Gewinnung von Ethanol aus Cellulose, Lactose, und Xylose mit Hilfe von Hefen und Enzymen

    Energy Technology Data Exchange (ETDEWEB)

    Schwank, U

    1986-07-03

    Experiments with mixtures of whey and corn showed that more than 85% of the lactose was degraded into ethanol. The applicability of cellulose was investigated by means of potatoes. Cellulase is inhibited by glucose, which is a fermentation intermediate, as well as by the end product ethanol. A cellulase inhibitor in potatoes was detected and stabilized; this inhibitor could be degraded into neutral components by a suitable enzyme. Saccharification and fermentation experiments showed that the cellulose fraction of potatoes can be reduced efficiently. The effects of non-enzymatic pretreatment on enzymatic degradation of cellulose, combined with fermentation of the degradation products, are illustrated by the example of cellulose treated with acid and alkaline substances. A continuous fermentation system was developed from which the ethanol is withdrawn in vapour form. The system made better use of the cellulase activity and increased the efficiency of a xylose-fermenting yeast. The new method is compared with batch experiments in order to assess its efficiency. The advantages of the continuous process are proved for two yeasts of the species Pachysolu and Pichia. Specific fermentation rates up to 0.08 g/(g x h) and fermentation yields up to 0.42 g ethanol/g xylose were achieved with Pichia stipitis.

  17. Measurement of low radioactivity in underground laboratories by means of many-dimensional spectrometry; Messung geringer Radioaktivitaet in Untertagelaboratorien mit Hilfe mehrdimensionaler Spektrometrie

    Energy Technology Data Exchange (ETDEWEB)

    Niese, Siegfried

    2008-01-15

    In this contribution beside the possibilities for the measurements in underground laboratories also the application of the many-dimensional spectrometry is considered, under which coincidence, anticoincidence, and time-resolving spectrometric are to be understood. Very extensively the interaction of cosmic radiation with matter is considered.

  18. Resource planning of solid waste materials through process modelling as contribution to sustainable resource management; Ressourcenplanung fester Abfallstoffe mit Hilfe der Prozessmodellierung als Beitrag zum nachhaltigen Ressourcenmanagement

    Energy Technology Data Exchange (ETDEWEB)

    Pehlken, Alexandra [Bremen Univ. (Germany). BIK, Institut fuer integrierte Produktentwicklung

    2010-10-15

    Raw materials are essential to satisfy our needs in energy and products. Many raw materials are restricted and far away from being endless available; therefore there is a strong intention of developing raw material- and energy-efficient production processes. Recycling processes provide a substantial contribution to sustainable resource management due to the supply of valuable secondary raw materials for new applications. Processing solid waste materials generate new secondary resources from residues as resources for new products. This saves primary resources and keeps up a long material life cycle. But material characterisation is an important issue to look at. Material properties ascertain the following application possibilities. It has to be noted that no processing technique can guarantee solely material flows with properties to substitute primary raw materials. There are always material flows that are of minor quality. This makes it difficult to assess the future potential of secondary raw materials to be available for following applications with specific quality demands. (orig.)

  19. Study of radiation induced F centers in lithium fluoride by means of the magnetic resonance; Untersuchung strahlungsinduzierter F-Zentren in Lithiumfluorid mit Hilfe der magnetischen Resonanz

    Energy Technology Data Exchange (ETDEWEB)

    Klempt, T.

    2002-07-01

    In the present thesis monocrystalline lithium fluoride samples were studies, which were treated earlier with high-energetic radiation. By means of the measurement of different parameters as F center concentration, correlation times {tau}{sub e} of the F centers and the spin-lattice relaxation time T{sub 1} it could be proved that ther relaxation caused by the paramagnetic F centers is constrained by the spin diffusion D{sub s}. Thereby it was simultaneously shown that by means of the NMR relaxation time statements on the dynamics and concentration of the F centers could be met. The temperature dependence of the correlation time of the F centers {tau}{sub e} exhibits at low concentrations a typical Raman behaviour, which shows at temperatures up to about 20 K a {tau}{sub e}{sup -1}{proportional_to}T{sup 9} dependence and for temperatures above it in a {tau}{sub e}{sup -1}{proportional_to}T{sup 2} dependence changes. By annealing measurements by means of the NMR the activation energies of the V{sub 3} centers and F centers for their diffusion motion could be determined. Thereby it was shown that the activation energy of the V{sub 3} center increases from E{sub A}=0.6 eV at a sample irradiated with 100 kGy to 1.0 eV at highly irradiated samples. The diffusion motion of the F center possesses an activation energy of 1.5 eV.

  20. Characterization of cyclic deformation behaviour by mechanical, thermometrical and electrical methods; Bewertung zyklischer Verformungsvorgaenge metallischer Werkstoffe mit Hilfe mechanischer, thermometrischer und elektrischer Messverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Pietrowski, A. [Essen Univ. (Gesamthochschule) (Germany). Lehrstuhl fuer Werkstoffkunde; Eifler, D. [Kaiserslautern Univ. (Germany). Lehrstuhl fuer Werkstoffkunde

    1995-03-01

    Cyclic deformation causes changes in the microstructure and subsequently failure of structural parts. Mechanical, thermometrical and electrical methods can be used to characterize the deformation behaviour of metals as can be shown for normalized or heat treated steels as well as for sintered steels. (orig.)

  1. Investigation into magnetic correlations in cuprates by means of neutron scattering experiments; Untersuchung magnetischer Korrelationen in Kupraten mit Hilfe von Neutronenstreuexperimenten

    Energy Technology Data Exchange (ETDEWEB)

    Henggeler, W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1996-12-31

    Cuprate materials containing rare earth ions were studied. The main experimental tools were inelastic and elastic neutron scattering techniques. Some {mu}SR, susceptibility and specific heat measurements were also performed. One aim was to learn more about the crystalline environment of the rare earth ions in these substances via the crystalline electric field (CEF) interaction. Furthermore, we investigated the correlations of the magnetic moments of these ions by a determination of the dispersion of the CEF excitations. The theory that is essential for the understanding of this work is outlined. The instruments on which the experiments have been performed are presented. We show the measurements of the CEF excitations of Ho{sup 3+} in Y{sub 0.99}Ho{sub 0.01}Ba{sub 2}Cu{sub 3}O{sub 6+x}. The Ho ions represent ideal local probes to examine changes of the charge distribution in the copper oxide planes upon doping with oxygen. To prevent any influence of the Ho-Ho exchange interaction on the CEF excitations we performed the experiments on substances containing only one percent of Ho. Our results show that for all the intermediately doped compounds the charge distribution is very inhomogeneous. For all the highly doped samples we observe a line asymmetry for which several possible origins are discussed. We examine the Pr{sup 3+} CEF excitations in the Pr{sub 2-x}Ce{sub x}CuO{sub 4(-{delta})} (0{<=}x{<=}0.2)-substances. Our results show a coexistence of different environments of the Pr ions in all the doped compounds. We try to describe these inhomogeneities with the help of a model. We used the {mu}SR-technique on some of these samples in order to learn more about the oxygen reduction process. Finally, we performed inelastic neutron scattering experiments on Pr{sub 1.86}Ce{sub 0.14}CuO{sub 4} single crystal, which allowed a direct determination of the coupling constants between the magnetic moments of the Pr ions. (author) figs., tabs., 93 refs.

  2. Innovative CO{sub 2} separation process for biogas upgrading using polymeric resins; Innovatives CO{sub 2}-Abscheideverfahren zur Biogasaufbereitung mit Hilfe von Polymerharzen

    Energy Technology Data Exchange (ETDEWEB)

    Harrivelle, Carole; Safai, Daniel; Raab, Katharina; Klein, Barbara [Stuttgart Univ. (Germany). Abt. Brennstoffe und Rauchgasreinigung; Scheffknecht, Guenter

    2016-08-01

    Upgraded biogas can be injected into the natural gas grid. The Institute of Combustion and Power Plant Technology (IFK) is investigating several innovative biogas upgrading processes with the aim to develop treatment methods adapted for small biogas plants. This paper presents a process to separate CO{sub 2} from CH{sub 4} by concentration swig adsorption using an amine functionalized polymer resin. The experiments were carried out at a continuous laboratory scale plant. The results are compared with previous experiments from earlier work at the IFK. The new resin shows a significant increase of working capacity and CH{sub 4} purity as well as a decrease of CH{sub 4} loss.

  3. Predicting the durability of mineral external plaster using accelerated ageing tests; Prognose der Dauerhaftigkeit mineralischer Aussenputze mit Hilfe von beschleunigten Alterungstests

    Energy Technology Data Exchange (ETDEWEB)

    Bochen, Jerzy; Nowak, Henryk A. [Schlesische Technische Universitaet, Lehrstuhl Bauprozesse, Gliwice (Poland)

    2004-08-01

    This article presents a technique for accelerated ageing tests for different plasters. Two models were developed for describing the durability. The models describe changes in selected characteristics due to frost damage and leaching. The first model is based on changes in mass, the second on changes in strength. The models consider the main characteristics that influence durability, such as strength, porosity, permeability, adhesive tensil strength and aggressive environmental influences. Both models enable the durability of external plaster to be predicted. (Abstract Copyright [2004], Wiley Periodicals, Inc.) [German] Der Beitrag stellt eine Methode fuer beschleunigte Alterungstests von verschiedenen Putzen vor. Fuer die Beschreibung der Dauerhaftigkeit wurden zwei Modelle entwickelt. Die Modelle beschreiben Veraenderungen ausgewaehlter Eigenschaften, die infolge von Frostschaeden und Auslaugung auftreten. Das erste Modell basiert auf der Veraenderung der Masse und das zweite auf der Veraenderung der Festigkeit. In den Modellen werden die wesentlichen Eigenschaften beruecksichtigt, die die Dauerhaftigkeit beeinflussen, wie z. B. Festigkeit, Porositaet, Dichtigkeit, Haftzugfestigkeit und agressive Umwelteinwirkungen. Beide Modelle ermoeglichen die Prognose der Dauerhaftigkeit von Aussenputzen. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  4. Characteristic values of energy consumption in buildings. Guideline VDI 3807; Bewertung des Verbrauchsverhaltens von Gebaeuden mit Hilfe von Kennwerten. Die Richtlinie VDI 3807

    Energy Technology Data Exchange (ETDEWEB)

    Muegge, G. [Verein Deutscher Ingenieure (VDI), Essen (Germany).

    2000-07-01

    Characteristic values of energy consumptions are used since several years for a first analysis of the energy consumption in buildings. The application is regulated in the Guideline VDI 3807 'Characteristic values of energy consumption in buildings' which is presented in this lecture. Part 1 of the guideline deals with the fundamentals of the characteristic values of energy consumption, Parts 2 and 3 give empirical values of the heating energy and electricity consumption resp. water consumption. (orig.)

  5. Modification of the refractive index of dielectrica by means of ionizing radiation; Modifikation des Brechungsindexes von Dielektrika mit Hilfe ionisierender Strahlung

    Energy Technology Data Exchange (ETDEWEB)

    Andreas, B.

    2005-05-01

    Refractive-index changes are studied, which result by interaction of ionizing radiation with dielectric, optically transparent solids. As examples two materials are studied. At the one hand it deals with polymethylmethacrylate (PMMA), a polymer, which is irradiated with synchrotron radiation, and at the other hand with lithium niobate (LiNbO{sub 3}), an oxidic crystal, which is irradiated by fast helium ions. In both materials refractive-index changes in the range 10{sup -4} to 10{sup -3} can be produced, which is very interesting for many applications in photonics.

  6. Analyse der Auswirkungen zweier Infusionsregime auf den Säure-Basen-Haushalt mit Hilfe des Stewart-Modells im Rahmen einer intraoperativen zielgerichteten Hämodynamiktherapie

    OpenAIRE

    Hoffmann, Benedikt

    2018-01-01

    Objective: Intraoperative fluid and volume therapy is an essential component of anaesthesiologic patient care with the aim to maintain normovolaemia with minimal impact on acid-base balance. So far, there is little data of the effects of guided fluid regimens on the acid-base balance in the perioperative context. Therefore, the aim of this study was to investigate the effects of two different infusion regimens guided by a goal-directed intraoperative hemodynamic algorithm on th...

  7. Analyse der pharmazeutischen Versorgungssituation von Patienten mit Psoriasis-Arthritis auf Basis von Routinedaten der Gesetzlichen Krankenversicherung.

    Science.gov (United States)

    Sondermann, Wiebke; Ventzke, Julia; Matusiewicz, David; Körber, Andreas

    2018-03-01

    Die Psoriasis-Arthritis (PsA) gehört zu den chronisch entzündlichen Gelenkerkrankungen. Trotz zahlreicher versorgungswissenschaftlicher Studien in Deutschland liegen zur pharmazeutischen Versorgungssituation von PsA-Patienten bisher kaum aktuelle Ergebnisse vor. Mit Hilfe einer systematischen Literaturrecherche sowie anhand von Routinedaten der Allgemeinen Ortskrankenkasse (AOK) Rheinland/Hamburg wird ein aktueller Überblick über die pharmazeutische Versorgung von PsA-Patienten in Deutschland gegeben. Selektiert wurden Versicherte aus dem ambulanten und stationären Bereich, die im 1. und 2. Quartal des Jahres 2014 die gesicherte Abrechnungsdiagnose Psoriasis-Arthritis L40.5+ aufwiesen. Anschließend wurden auf Basis dieser "vorab definierten" Kohorte die Arzneimitteldaten für 5 Jahre (01.01.2010-31.12.2014) abgerufen. Es konnten insgesamt n  =  3205 Versicherte (45 % männlich, 55 % weiblich) der AOK Rheinland/Hamburg mit einer gesicherten PsA-Diagnose selektiert werden. Das Durchschnittsalter betrug 58,9 Jahre. 53,7 % der PsA-Patienten wurden mit systemischen PsA-relevanten Arzneimitteln versorgt. Nichtsteroidale Antirheumatika (NSAR) wurden am häufigsten verordnet, gefolgt von systemischen Glucocorticoiden. Von den selektierten PsA-Patienten, die eine Systemtherapie erhielten, wurden 72,1 % mittels einer Disease-modifying-antirheumatic-Drug (DMARD)-Monotherapie behandelt, gefolgt von der Kombinationstherapie aus DMARDs und Biologika (20,9 %). Die pharmakologische Therapie der PsA muss eine Gewährleistung zwischen adäquater Versorgung der PsA mit Verhinderung der Krankheitsprogression und ökonomischer Verantwortung darstellen. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  8. FORFAHRT - autonomous, infrastructure-supported driving with an innovative drive technology. Final report; FORFAHRT - Fahrzeugautonome und infrastrukturgestuetzte Fahrweise mit innovativer Antriebstechnologie. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Neunzig, D.; Wallentowitz, H.

    2001-10-01

    Apart from technical measures, adapted vehicle operation and driver actions are the most promising measures for reduction of pollutant emissions. The FORFAHRT project aims at the development of a vehicle concept combined with concepts for optimisation of traffic. The new vehicle concept will include a driver supporting system which will reduce emissions on a short-term or medium-term basis by checking ahead to avoid sudden driving manoeuvres. For this, the ika program system PELOPS was used in a simulation study for developing and analyzing a vehicle concept with appropriate drive and telematics technologies. Another part of the project involved an investigation of the information required on road layout and traffic conditions for the purpose of emission minimisation, and of the effects of checking ahead on the traffic situation. The analyses of the new driver assistance concept suggest a practically relevant consumption reduction of more than 20 percent for the FORFAHRT system. [German] Zur Minimierung der Emissionen des Strassenverkehrs werden heute hauptsaechlich zwei Ansaetze verfolgt: Mit Hilfe umfangreicher technischer Massnahmen wird einerseits der Schadstoffausstoss des Motors weiter reduziert und andererseits werden die auf das Fahrzeug wirkenden Fahrwiderstaende durch z.B. Leichtbau verringert. Neben rein technischen Optimierungsmassnahmen besteht ein erhebliches Emissionsminderungspotential in der Anpassung des Fahrzeugbetriebs und der Fahrweise des Fahrzeugfuehrers an die jeweilige Verkehrssituation. Das vorliegende Projekt FORFAHRT nimmt diesen Gedanken auf und verknuepft technische Massnahmen mit Konzepten zur Optimierung des Verkehrsablaufs. Ziel von FORFAHRT ist die Entwicklung eines Fahrzeugkonzeptes, welches kurz- bzw. mittelfristig mit Hilfe eines geeigneten Fahrerassistenzsystems eine deutliche Minimierung der Emissionen durch eine vorausschauende und damit ruhige Fahrweise ermoeglicht. Hierzu wird im Rahmen einer Simulationsstudie mit dem ika

  9. MRI for therapy planning in patients with atrial septum defects; MRT zur Therapieplanung bei Patienten mit Vorhofseptumdefekt

    Energy Technology Data Exchange (ETDEWEB)

    Huber, A.; Rummeny, E. [Klinikum rechts der Isar, Technische Universitaet Muenchen, Institut fuer Radiologie, Muenchen (Germany); Prompona, M.; Reiser, M.; Theisen, D. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany); Kozlik-Feldmann, R. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Klinik und Poliklinik fuer Kinderkardiologie, Muenchen (Germany); Muehling, O. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Medizinische Klinik I, Muenchen (Germany)

    2011-01-15

    wurden, in die Studie eingeschlossen. Anhand der Funktionsaufnahmen wurde der Typ des Vorhofseptumdefekts identifiziert. Mit einer Phasenkontrastflussmessung wurde das Ausmass des Links-rechts-Shunts quantifiziert und bei 24 Patienten mit der Oxymetrie im Herzkatheter verglichen. Mit Hilfe der kontrastverstaerkten MR-Angiographie wurden die thorakalen Gefaesse beurteilt, um vaskulaere Anomalien zu identifizieren, die dann mit intraoperativen Ergebnissen verglichen wurden. Die Indikation zur operativen Versorgung wurde bei 16 Patienten gestellt, 8 Patienten wurden interventionell behandelt und bei 32 Patienten mit Vorhofseptumdefekt ergab sich ein niedriges Shuntvolumen, das keine operative oder interventionelle Behandlung erforderte. Die Diagnose von vaskulaeren Anomalien, ausnahmslos Lungenvenenfehlmuendungen, korrelierten in allen Faellen mit den intraoperativen Befunden, ebenso die Lokalisation der behandlungsbeduerftigen Vorhofseptumdefekte mit den intraoperativen Ergebnissen und der praeinterventionellen Untersuchung im Herzkatheterlabor. Die Ergebnisse der Shuntquantifizierung zeigte eine gute Korrelation mit den Ergebnissen der invasiven Oxymetrie (r=0,91, p <0,0001). Das kombinierte MRT-Protokoll aus Cineaufnahmen, Phasenkontrastflussmessungen und kontrastverstaerkter MR-Angiographie besitzt eine hohe diagnostische Genauigkeit bei der praeoperativen Abklaerung von Patienten mit Vorhofseptumdefekten. (orig.)

  10. MITS instrumentation error analysis report

    International Nuclear Information System (INIS)

    Nelson, D.W.; Hillon, D.D.

    1980-01-01

    The MITS (Machine Interface Test System) installation consists of three types of process monitoring and control instrumentation: flow, pressure, and temperature. An effort has been made to assess the various instruments used and assign a value to the accuracy that can be expected. Efforts were also made to analyze the calibration and installation procedures to be used and determine how these might effect the system accuracy

  11. MIT miniaturized disk bend test

    International Nuclear Information System (INIS)

    Harling, O.K.; Lee, M.; Sohn, D.S.; Kohse, G.; Lau, C.W.

    1983-01-01

    A miniaturized disk bend test (MDBT) using transmission electron microscopy specimens for the determination of various mechanical properties is being developed at MIT. Recent progress in obtaining strengths and ductilities of highly irradiated metal alloys is reviewed. Other mechanical properties can also be obtained using the MDBT approach. Progress in fatigue testing and in determination of the ductile-to-brittle transition temperature is reviewed briefly. 11 figures

  12. Redox speciation of final repository relevant elements using separation methods in combination with ICP mass spectrometry; Redoxspeziation von endlagerrelevanten Elementen mit Hilfe von Trennmethoden gekoppelt an ein Massenspektrometer mit induktiv gekoppeltem Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Graser, Carl-Heinrich

    2015-12-18

    The long-term safety assessment for nuclear waste repositories requires a detailed understanding of the chemistry of actinide elements in the geosphere. The development of advanced analytical tools is required to gain detailed insights into actinide redox speciation in a given system. The mobility of radionuclides is mostly determined by the geochemical conditions which control the redox state of radionuclides. Besides the longlived radionuclides plutonium (Pu) and neptunium (Np), which are key elements in high level nuclear waste, iron (Fe) represents a main component in natural systems controlling redox related geochemical processes. Analytical techniques for determining oxidation state distribution for redox sensitive radionuclides and other metal ions often have a lack of sensitivity. The detection limits of these methods (i.e. UV/vis, TRLFS, XANES) are in general in the range of ≥ 10{sup -6} mol.L{sup -1}. As a consequence ultrasensitive new analytical techniques are required. Capillary electrophoresis (CE) and ion chromatography (IC) are powerful separation methods for metal ions. In the course of this thesis different speciation method for iron, neptunium and plutonium were optimized. With the optimized setup redox speciation analysis of these elements in different samples were done. Furthermore CE hyphenated to inductively coupled plasma sector field mass spectrometry (CE - ICP - SF - MS) was used to measure the redox speciation of Pu (III, IV, V, VI), Np (IV, V, VI) and Fe (II, III) at concentrations lower than 10{sup -7} mol.L{sup -1}. CE coupling and separation parameters such as sample gas pressure, make up flow rate, capillary position, auxiliary gas flow, as well as the electrolyte system were optimized to obtain the maximum sensitivity. The methodes detection limits are 10{sup -12} mol.L{sup -1} for Np and Pu. The various oxidation state species of Pu and Np in different samples were separated by application of an acetate based electrolyte system. The separation of Fe (II) and Fe (III) was investigated using different organic complexing ligands, EDTA and o-phenanthroline. For the Fe redox system, a limit of detection of 10{sup -8} mol.L{sup -1} was calculated. An improvement for the recovery values of the analytes was achieved by lowering the surface tension of the make up electrolyte. To determine the performance of the method a comparison of the speciation results with other methods like UV/vis, solvent extraction and thermodynamical calculations was done. The reproducibility of the method was examined and the linearity of the calibration in trace concentration levels was determined. To identify the redox species in different samples the electrophoretic mobilities of the analytes were calculated. Additional experiments to determine the redox species distribution of uranium and iron were done by hyphenating an ion chromatography column to a quadrupol inductively coupled plasma mass spectrometer (Q - ICP - MS). This method was applied to determine the redox species distribution of dissolved uranium in a fertilizer solution. With the data derived from iron experiments with CE - ICP - MS and IC - ICP - MS the characteristic values of both methods like separation times and detection limits were compared. The comparison of the performance of both methods was done by contrasting the linearity of calibration, analytical precision and recoveries.

  13. Magnetic resonance imaging in the evaluation of pneumonia; Nachweis von pneumonischen Infiltraten mit der MRT

    Energy Technology Data Exchange (ETDEWEB)

    Eibel, R.; Herzog, P.; Dietrich, O.; Reiser, M.; Schoenberg, S.O. [Ludwig-Maximilians-Universitaet Muenchen (Germany). Institut fuer Klinische Radiologie; Rieger, C.; Ostermann, H. [Ludwig-Maximilians-Universitaet Muenchen (Germany). Abteilung fuer Haematologie/Onkologie, Klinikum Grosshadern

    2006-04-15

    Rundherde mit einem Durchmesser deutlich unterhalb der Schichtdicke nicht mehr zuverlaessig erfasst werden koennen. Auch Verkalkungen sind nicht mit der gleichen Sicherheit wie im CT zu identifizieren. Gleiches gilt fuer den Nachweis von Luftsicheln und -einschluessen in Laesionen. Mit Hilfe der parallelen Bildgebung koennen beide Lungenfluegel in 1-2 Atemstillstaenden mit einer Ortsaufloesung von 6 mm in der z-Achse und Submillimeteraufloesung in der x- und y-Ebene untersucht werden. Raumzeiten <10 min lassen sich so realisieren. Insbesondere fuer die Verlaufsbeurteilung von pneumonischen Infiltraten bei immunsupprimierten Patienten kann die MRT geeignet sein und zu einer geringeren Dosisexposition der Patienten beitragen. (orig.)

  14. Hilfe oder Hindernis? Meinungen finnischer Sprachstudierender über Mehrsprachigkeit als Ressource beim Deutschlernen

    Directory of Open Access Journals (Sweden)

    Sabine Grasz

    2017-10-01

    Full Text Available Der Fremdsprachenunterricht in Finnland befindet sich gerade in einer Umbruchphase, denn mit der Einführung neuer Lehrpläne im Jahr 2016 werden Verfahren der Mehrsprachigkeitsdidaktik in Zukunft eine zentrale Rolle spielen. In diesem Beitrag wird untersucht, ob und wie finnische Universitätsstudierende, die selbst von einer eher monolingual ausgerichteten Lerntradition geprägt sind, ihr mehrsprachiges Repertoire als Ressource beim Lernen weiterer Fremdsprachen sehen. Zu diesem Zweck wurde eine Befragung unter Lehramtsstudierenden der Fächer Anglistik und Skandinavistik, die Germanistik als Nebenfach studieren möchten, durchgeführt. Die Analyse zeigt, dass die Studierenden zwar mehrheitlich positive Einstellungen gegenüber Mehrsprachigkeit aufweisen, dass es aber Entwicklungsbedarf im Hinblick auf Sprachbewusstheit, multilinguale Fähigkeiten und bei den Einstellungen gegenüber Sprachmischungen gibt. Foreign language education in Finland is currently undergoing a period of change, as the introduction of new curricula in 2016 will lead to a central role of multilingualism in teaching. This article examines whether and how Finnish university students, who themselves were influenced by a more monolingual learning tradition, consider their multilingual repertoire as a resource for learning other foreign languages. For this purpose, a survey was conducted among teacher students of English and Swedish, who would like to study German as a minor. The analysis shows that while the majority of students have positive attitudes towards multilingualism, there is a need for development in terms of language awareness, multilingual skills, and attitudes towards language mixes.

  15. Potential and possibilities of supplying energy from biomass and biogas; Potentiale und Moeglichkeiten der Energiebereitstellung durch Biomasse und Biogas

    Energy Technology Data Exchange (ETDEWEB)

    Sonnenberg, H. [Bundesforschungsanstalt fuer Landwirtschaft, Braunschweig (Germany). Inst. fuer Betriebstechnik; Weiland, P.; Ahlgrimm, H.J. [Bundesforschungsanstalt fuer Landwirtschaft (FAL), Braunschweig (Germany). Inst. fuer Technologie

    1998-06-01

    Agriculture`s potential contribution to the energy supply of the ``town of the future`` through the conversion of biomass to energy, including biogas production, is a rather modest one. Supposing that the share of total renewable energy in Germany`s primary energy demand rises to approximately 4%, then the proportion of biomass from biotic raw materials especially produced for the purpose will at the most make up an eighth of this amount. Beyond this, biomass is burdened with other drawbacks such as low supply efficiency, limited availability, and weather-dependent reliability. On the other hand, biomass is well suited for conversion to solid, liquid, and gaseous fuels, including inexpensive ones with low energy density (solid fuels), mostly used for stationary heating applications, as well as more expensive ones such as liquid fuels with a high energy density for mobile applications in the automotive sector. Thanks to its capacity to regenerate, biomass is an inexhaustible resource. Moreover, its natural life cycle has a small impact on the environment. [Deutsch] Der Beitrag, den die Landwirtschaft durch energetische Nutzung von Biomasse, z.B. auch mit der Erzeugung von Biogas, zur Energieversorgung der `Stadt der Zukunft` leisten kann, nimmt sich bescheiden aus. Wird erwartet, dass innerhalb des naechsten Jahrzehnts der Anteil regenerativer Energien insgesamt auf etwa 4% des Primaerenergie-Verbrauchs Deutschlands ansteigen koennte, so duerfte Biomasse als speziell zur Energiegewinnung angebaute nachwachsende Rohstoffe mit bestensfalls 0,5 Prozentpunkten daran beteiligt sein. Es beduerfen darueber hinaus auch Nachteile, wie geringe Bereitstellungseffizienz, beschraenkte Verfuegbarkeit und witterungsabhaengige Zuverlaessigkeit, der Beachtung. Die Biomasse kann jedoch mit Erfolg in feste, fluessige und gasfoermige Energietraeger konvertiert werden, sowohl in preiswerte mit geringer Energiedichte (Festbrennstoffe) fuer bevorzugt stationaeren Heizungs-Einsatz als auch

  16. Spinal trauma: first aid from cross-sectional imaging; Trauma der Wirbelsaeule: erste Hilfe durch Schnittbildverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Schueller, G.; Schueller-Weidekamm, C. [Emergency Radiology Schueller, Neerach (Switzerland)

    2014-09-15

    The diagnosis of the traumatized spine is one of the key issues for trauma radiologists. The cross-sectional imaging procedures, computed tomography (CT) and magnetic resonance imaging (MRI) are the essential methods in spinal trauma radiology. These modalities are of great help in accurately assessing injury patterns and extent and in providing indications of patient outcome. In contrast to cross-sectional imaging, radiography has a role in the evaluation of minor spinal trauma only. It is generally accepted that trauma radiologists do not use typical classifications to evaluate the spine partly because such an ideal classification system does not yet exist. Not least because of this classification difficulty, eponyms and synonyms are widely used to describe traumatology of the spine as a high level of specific information is included in these various terms. The members of the trauma team should be aware of the strengths and limitations of the methods used in the assessment of the spine. This article provides a brief outline of fundamental knowledge about the diagnosis of spinal trauma. (orig.) [German] Die Beurteilung der verletzten Wirbelsaeule nimmt fuer Traumaradiologen eine zentrale Stellung ein. Die Schnittbildverfahren CT und MRT sind ihre wesentlichen Arbeitsmethoden. Sie helfen dabei, schnell und mit hoher Zuverlaessigkeit Aussagen ueber Art und Ausmass von Verletzungen zu treffen sowie Hinweise auf die Prognose der Patienten zu geben. Die Projektionsradiographie hat ihre Bedeutung lediglich in der Diagnostik des Bagatelltraumas und ist in ihrer Aussagekraft auch dort nicht unumstritten. Traumaradiologen bedienen sich nicht ausschliesslich typischer Klassifikationen des Wirbelsaeulentraumas, z. T. auch deshalb, da es die ideale Klassifikation aus heutiger Sicht nicht gibt. Vielmehr ist es wichtig, auch ueber Eponyme und Synonyme Bescheid zu wissen, da sie ein hohes Mass an spezifischen Informationen der spinalen Verletzungen verinnerlichen. Alle

  17. Energy from biomass. Teaching material; Energie aus Biomasse. Ein Lehrmaterial

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    The textbook discusses the available options for power and heat generation from biomass as well as the limits of biomass-based power supply. The main obstacle apart from the high cost is a lack of knowledge, which the book intends to remedy. It addresses students of agriculture, forestry, environmental engineering, heating systems engineering and apprentice chimney sweepers, but it will also be useful to all other interested readers. [German] Biomasse kann aufgrund seiner vielfaeltigen Erscheinungs- und Umwandlungsformen sowohl als Brennstoff zur Waerme- und Stromgewinnung oder als Treibstoff eingesetzt werden. Die energetische Nutzung von Biomasse birgt zudem nicht zu verachtende Vorteile. Zum einen wegen des Beitrags zum Klimaschutz aufgrund der CO{sub 2}-Neutralitaet oder einfach, weil Biomasse immer wieder nachwaechst und von fossilen Ressourcen unabhaengig macht. All den bisher erschlossenen Moeglichkeiten der energetischen Nutzung von Biomasse moechte dieses Lehrbuch Rechnung tragen. Es zeigt aber auch die Grenzen auf, die mit der Energieversorgung durch Bioenergie einhergehen. Hohe Kosten und ein erhebliches Informationsdefizit behinderten bisher eine verstaerkte Nutzung dieses Energietraeges. Letzterem soll dieses Lehrbuch entgegenwirken. Das vorliegende Lehrbuch wurde fuer die Aus- und Weiterbildung erstellt. Es richtet sich vor allem an angehende Land- und Forstwirte, Umwelttechniker, Heizungsbauer und Schornsteinfeger, ist aber auch fuer all diejenigen interessant, die das Thema ''Energie aus Biomasse'' verstehen und ueberblicken moechten. (orig.)

  18. MIT pebble bed reactor project

    Energy Technology Data Exchange (ETDEWEB)

    Kadak, Andrew C. [Massachusetts Institute of Technology, Cambridge (United States)

    2007-03-15

    The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis.

  19. MIT pebble bed reactor project

    International Nuclear Information System (INIS)

    Kadak, Andrew C.

    2007-01-01

    The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis

  20. Comparative studies on ultrasonic, friction, laser and resistance pressure welding of NiTi shape memory alloys with high-alloy steels. Final report; Vergleichende Untersuchungen zum Ultraschall-, Reib-, Laserstrahl- und Widerstandspressschweissen von NiTi-Shape-Memory-Metall mit hochlegierten Staehlen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Zuckschwerdt, K.

    2000-04-01

    The suitability of different welding techniques for welding of NiTi shape memory alloys with high-alloy steel (C12CrNi17-7, X5CrNiNb19-9, X20Cr13) was investigated. The quality of the welds was analyzed using mechanical-technological, fractographic, metallographic and electron microscopy analysis. [German] Ziel dieses Forschungsvorhabens ist es, die Eignung der einzelnen Schweissverfahren fuer das Fuegen von NiTi-Formgedaechtnislegierungen mit hochlegiertem Stahl (X12CrNi17-7, X5CrNiNb19-9, X20Cr13) darzustellen und zu beurteilen. Die Qualitaet der Fuegeverbindungen wird mit Hilfe mechanisch-technologischer, fraktographischer, metallographischer und elektronenmikroskopischer Untersuchungen bewertet.

  1. Biotechnology Process Engineering Center at MIT Home

    Science.gov (United States)

    has provided a focal point for biotechnology research and education at MIT. Prominent examples include the NIH Training Program in Biotechnology and the NIH Training Program in Genomics; both of these are -genomic biology. Another example is the new DuPont-MIT Alliance (DMA), focused on materials biotechnology

  2. Ruedersdorf cement works substitutes raw material and fuel by means of a circulating fluidised bed; Roh- und Brennstoffsubstitution mit einer Zirkulierenden Wirbelschicht im Zementwerk Ruedersdorf

    Energy Technology Data Exchange (ETDEWEB)

    Scur, P. [Ruedersdorfer Zement GmbH, Ruedersdorf (Germany)

    1998-09-01

    The purpose of the present paper is to point out the great potential the cement industry holds for the utilisation of waste materials. There are meanwhile sufficient studies and measuring results to demonstrate the environmental acceptability of the processes and products involved. The solution found for Ruedersdorf cement kiln of using a circulating a fluidised bed for waste utilisation is a good example of the potential still available for conserving natural resources and landfill area. Efficient industrial applications of this kind should become a future mainstay of the waste industry. [Deutsch] In dem vorliegenden Beitrag sollte gezeigt werden, dass die Zementindustrie ueber ein hohes Potential zur thermischen und stofflichen Verwertung von Abfallstoffen verfuegt. Es liegen ausreichende Untersuchungen und konkrete Messergebnisse vor, mit denen die Umweltvertraeglichkeit von Prozess und Produkt nachgewiesen werden kann. Die Loesung zur Abfallverwertung an der Ruedersdorfer Zementofenanlage mit Hilfe einer Zirkulierenden Wirbelschicht ist ein Beispiel fuer die Reserven zur Schonung natuerlicher Ressourcen und zur Einsparung von Deponieraeumen. Derartige sinnvolle industrielle Einsatzmoeglichkeiten sollten ein wichtiges Standbein fuer die zukuenftige Abfallwirtschaft sein. (orig.)

  3. Modernization of heating systems. System solutions by renewabel heat in residnetial buildings. Consultant package; Heizungsmodernisierung. Systemloesungen mit erneuerbarer Waerme in Wohngebaeuden. Beratungspaket

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, F.

    2008-07-01

    Energy conservation measures in the area of buildings can considerably contribute to the planned reduction of CO{sub 2} emissions particularly if they are not only carried out in the field of new buildings but also in existing buildings. In this booklet technical possibilities and bases of constructional thermal insulation in modern construction engineering are described in detail. In this connection the following subjects are gone into: Low-energy houses, bases of heat and humidity technology, correct heating and ventilating, thermal insulation of heating systems and water heaters, renewable energy sources, legal obligations like energy passport, support possibilities, energy diagnosis and counselling. (GL) [German] Das Beratungspaket Heizungsmodernisierung wird Sie bei der Beratung und Kundeninformation rund um die Modernisierung von Heizungsanlagen unterstuetzen. Ansprechende Grafiken erleichtern die Orientierung in den technischen Details und geben Einblick in die Komplexitaet der Heizungsmodernisierung mit Hilfe regenerativer Energietechnik. Die Komponenten eines modernen, zeitgemaessen Heizsystems werden ebenso behandelt wie Investitionskosten, Betriebskosten und staatliche Foerderung. Von allgemeinen Informationen zur Waermeerzeugung fuer Heizung und Warmwasser bis hin zu wirtschaftlichen Alternativen durch Sonnenwaerme, Waermepumpen oder Heiztechnik mit Holz finden Sie alles, was der Kunde ueber moderne Heizsysteme fuer den Bestand wissen moechte. Auf der beiligenden CD-ROM finden Sie anschauliche Praesentationsgrafiken sowie Checklisten, die Sie zur Vorbereitung und im Kundengespraech nutzen oder Ihrem Kunden als Informationsmaterial ueberreichen koennen. (orig./GL)

  4. Biomass pretreatment

    Science.gov (United States)

    Hennessey, Susan Marie; Friend, Julie; Elander, Richard T; Tucker, III, Melvin P

    2013-05-21

    A method is provided for producing an improved pretreated biomass product for use in saccharification followed by fermentation to produce a target chemical that includes removal of saccharification and or fermentation inhibitors from the pretreated biomass product. Specifically, the pretreated biomass product derived from using the present method has fewer inhibitors of saccharification and/or fermentation without a loss in sugar content.

  5. Overview of MIT, ADIP irradiation experiments

    International Nuclear Information System (INIS)

    Kohse, G.; Harling, O.K.; Grant, N.J.

    1985-06-01

    Various rapidly solidified austenitic, ferritic and copper alloys have been produced at MIT for inclusion in ADIP neutron irradiation experiments. A brief summary of the alloys and their preparation and the achieved or projected irradiation parameters is provided

  6. Biotechnology Process Engineering Center at MIT - Overview

    Science.gov (United States)

    | Facsimile (617) 253-2400 | e-mail: bpec-www@mit.edu THERAPEUTIC GENE BIOTECHNOLOGY INDUSTRIAL CONSORTIUM Board (ICAB) in Therapeutic Gene Biotechnology. ICAB Member Representatives review our research progress

  7. MITS Data Acquisition Subsystem Acceptance Test procedure

    International Nuclear Information System (INIS)

    Allison, R.

    1980-01-01

    This is an acceptance procedure for the Data Acquisition Subsystem of the Machine Interface Test System (MITS). Prerequisites, requirements, and detailed step-by-step instruction are presented for inspecting and performance testing the subsystem

  8. MIT research reactor. Power uprate and utilization

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Lin-Wen [Nuclear Reactor Laboratory, Massachusetts Inst. of Technology, Cambridge, MA (United States)

    2012-03-15

    The MIT Research Reactor (MITR) is a university research reactor located on MIT campus. and has a long history in supporting research and education. Recent accomplishments include a 20% power rate to 6 MW and expanding advanced materials fuel testing program. Another important ongoing initiative is the conversion to high density low enrichment uranium (LEU) monolithic U-Mo fuel, which will consist of a new fuel element design and power increase to 7 MW. (author)

  9. Hamlet er manden i mit liv

    DEFF Research Database (Denmark)

    Rösing, Lilian Munk

    2009-01-01

    Hamlet er manden i mit liv. Min elskede. Jeg har en drøm om at frelse ham. At redde ham ud af sin mors soveværelse og ind i mit. Væk fra det ødipale Helvede han befinder sig i, fastlåst mellem et svin af en faderskikkelse (Claudius) og en alt for idealiseret far (gamle Hamlet), vågende over sin m...

  10. MR imaging of gastric wall layers in vitro: correlation to the histologic wall structure; Experimentelle Darstellung der Schichten der Magenwand mittels MRT: Korrelation mit dem histologischen Wandaufbau

    Energy Technology Data Exchange (ETDEWEB)

    Lubienski, A.; Grenacher, L.; Schipp, A.; Duex, M. [Radiologische Klinik, Abt. Radiodiagnostik, Ruprecht-Karls-Univ. Heidelberg (Germany); Reith, W. [Abt. fuer Neuroradiologie der Radiologischen Universitaetsklinik, Univ. Saarland (Germany); Mechtersheimer, G. [Inst. fuer Allgemeine Pathologie, Ruprecht-Karls-Univ. Heidelberg (Germany)

    2002-04-01

    vier Magenwandschichten auf den MR-Bildern voneinander differenziert werden. Der direkte Vergleich dieser Magenwandschichten mit den korrespondierenden histologischen Schnitten ergab von lumenseitig betrachtet folgende Korrelation: 1. Schicht: intermediaeres Signal - Mukosa, 2. Schicht: hypointenses Signal - Lamina muscularis mucosae, 3. Schicht: hyperintenses Signal - Submukosa, 4. Schicht: intermediaeres Signal - Muscularis propria. Schlussfolgerungen: Magnetresonanztomographisch sichtbare Magenwandschichten wurden dem anatomischen Wandaufbau des Magens mit Erfolg zugeordnet. Damit besteht erstmals die Moeglichkeit, die Tiefeninfiltration eines Magenkarzinoms mit Hilfe hochaufgeloester MR-Aufnahmen zu beurteilen. Diese Einschaetzung gilt ausdruecklich nicht fuer die Subserosa und Serosa, da ueber die Darstellbarkeit dieser sehr variablen Wandschichten durch die MRT noch keine Aussage zu treffen ist. (orig.)

  11. Untersuchungen an Eisen- und Lanthanoidhaltigen Koordinationsclustern mit Triazolat- sowie Semiquinonato-Liganden

    OpenAIRE

    Kriese, Thomas

    2016-01-01

    Magnetische Untersuchungen an Lanthanoiddimeren mit Semiquinonato-Liganden. Gemischtvalente Eisen-Koordinationsclustern. Lanthanoid-Koordinationscluster mit zwölf Lanthanoiden aber mit verschiedenen Clusterladungen.

  12. Biomass recalcitrance

    DEFF Research Database (Denmark)

    Felby, Claus

    2009-01-01

    Alternative and renewable fuels derived from lignocellulosic biomass offer a promising alternative to conventional energy sources, and provide energy security, economic growth, and environmental benefits. However, plant cell walls naturally resist decomposition from microbes and enzymes - this co......Alternative and renewable fuels derived from lignocellulosic biomass offer a promising alternative to conventional energy sources, and provide energy security, economic growth, and environmental benefits. However, plant cell walls naturally resist decomposition from microbes and enzymes...... - this collective resistance is known as "biomass recalcitrance." Breakthrough technologies are needed to overcome barriers to developing cost-effective processes for converting biomass to fuels and chemicals. This book examines the connection between biomass structure, ultrastructure, and composition......, to resistance to enzymatic deconstruction, with the aim of discovering new cost-effective technologies for biorefineries. It contains chapters on topics extending from the highest levels of biorefinery design and biomass life-cycle analysis, to detailed aspects of plant cell wall structure, chemical treatments...

  13. Private is Public?! Der Umgang von 14- bis 18-Jährigen mit Sozialen Medien. - Eine explorativ-empirische Untersuchung im gymnasialen Kontext

    Directory of Open Access Journals (Sweden)

    Christian Filk

    2011-12-01

    Full Text Available Die explorative Studie „Private is Public?!“ fokussiert sich auf das Mediennutzungsverhalten von 14- bis 18-jährigen Schülerinnen und Schülern mit Schwerpunkt soziale Medien. Das Forscherteam führte seine empirische Untersuchung am Mons-Tabor-Gymnasium im ländlich gelegenen Montabaur, Rheinland-Pfalz (Deutschland durch. Gestützt auf Forschungshypothesen erhoben Christian Filk, Hanno Schauer und Amina Ovcina Cajacob mit Hilfe des Instruments der schriftlichen Befragung aktuelle Trends zu Frequenz und Intensität der Nutzung sozialer Medien, zur zweckbezogenen Nutzung sozialer Medien, zu Informationsverhaltensschemata in sozialen Medien sowie zu Erfahrungen mit Cyber-Mobbing. Die gewonnenen Daten werden mittels deskriptiv-statistischer Analysen ausgewertet. Schliesslich diskutieren Verfasser und Verfasserin den innovativen Einsatz privater sozialer Medien für den Unterricht in öffentlichen Schulen. The explorative study “Private is Public?!” focuses on the use of media of 14- to 18-years-old students with a special focus on social media. The research team conducted its empirical investigation at Mons Tabor High School in the rural area of Montabaur, Rhineland-Palatinate (Germany. Based on research hypothesis Christian Filk, Hanno Schauer and Amina Ovcina Cajacob are using written surveys in order to identify current trends in frequency and intensity of performing social media, purpose-oriented use of social media, information-seeking behavior patterns in social media, and last but not least experiences with cyber-bullying. The collected data are evaluated by using descriptive statistical analysis. Finally, the authors discuss the innovative use of private social media for teaching in public schools.

  14. Minimally invasive thyroidectomy (MIT): indications and results.

    Science.gov (United States)

    Docimo, Giovanni; Salvatore Tolone, Salvatore; Gili, Simona; d'Alessandro, A; Casalino, G; Brusciano, L; Ruggiero, Roberto; Docimo, Ludovico

    2013-01-01

    To establish if the indication for different approaches for thyroidectomy and the incision length provided by means of pre-operative assessment of gland volume and size of nodules resulted in safe and effective outcomes and in any notable aesthetic or quality-of-life impact on patients. Ninehundred eightytwo consecutive patients, undergoing total thyroidectomy, were enrolled. The thyroid volume and maximal nodule diameter were measured by means of ultrasounds. Based on ultrasounds findings, patients were divided into three groups: minimally invasive video assisted thyroidectomy (MIVAT), minimally invasive thyroidectomy (MIT) and conventional thyroidectomy (CT) groups. The data concerning the following parameters were collected: operative time, postoperative complications, postoperative pain and cosmetic results. The MIVAT group included 179 patients, MIT group included 592 patients and CT group included 211 patients. Incidence of complications did not differ significantly in each group. In MIVAT and MIT group, the perception of postoperative pain was less intense than CT group. The patients in the MIVAT (7±1.5) and MIT (8±2) groups were more satisfied with the cosmetic results than those in CT group (5±1.3) (p= MIT is a technique totally reproducible, and easily convertible to perform surgical procedures in respect of the patient, without additional complications, increased costs, and with better aesthetic results.

  15. Selective separation of anaerobic sludge by means of hydrocyclones; Selektive Abtrennung von Anaerobschlamm mit Hydrozyklonen

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.; Bohnet, M. [Technische Univ. Braunschweig (Germany). Inst. fuer Verfahrens- und Kerntechnik

    1999-07-01

    In anaerobic waste water cleaning, biomass concentration constitutes a central problem because of long generating times and low biomass sinking speeds. In order to decouple hydraulic retention time from biomass retention time, biomass must be fed back into the reactor. The fact that separation by means of common gravitational separators such as sedimentation tanks and baffle plate thickeners is unspecific results in the enrichment in the reactor of inorganic solids, whose presence is corollary to the anaerobic sludge process. Hence, industry has a great interest in separating anaerobic sludge into organic and inorganic constituents as a means of safeguarding high operating stability and degradation efficiency of anaerobic reactors. Hydrocyclones, permitting selective separation, are an obvious approach. (orig.) [German] Bei der anaeroben Abwasserreinigung ist die Biomassekonzentrierung aufgrund langer Generationszeiten und geringer Sinkgeschwindigkeiten der Biomasse ein zentrales Problem. Zur Entkopplung der hydraulischen Verweilzeit von der Verweilzeit der Biomasse ist eine Rueckfuehrung der Biomasse erforderlich. Da bisher eingesetzte Schwerkraftabscheider, wie Absetzbecken und Lamellenklaerer, unspezifisch trennen, kommt es zu einer Anreicherung anorganischer Feststoffe im Reaktor, die sich prozessbedingt im Anaerobschlamm befinden. So hat die Industrie ein grosses Interesse an einer Auftrennung des Anaerobschlamms in organische und anorganische Bestandteile, um eine hohe Betriebsstabilitaet und Abbauleistung der Anaerobreaktoren zu gewaehrleisten. Hierzu bieten sich Hydrozyklone an, weil mit ihnen eine selektive Trennung moeglich ist. (orig.)

  16. Magnetosphere - Ionosphere - Thermosphere (MIT) Coupling at Jupiter

    Science.gov (United States)

    Yates, J. N.; Ray, L. C.; Achilleos, N.

    2017-12-01

    Jupiter's upper atmospheric temperature is considerably higher than that predicted by Solar Extreme Ultraviolet (EUV) heating alone. Simulations incorporating magnetosphere-ionosphere coupling effects into general circulation models have, to date, struggled to reproduce the observed atmospheric temperatures under simplifying assumptions such as azimuthal symmetry and a spin-aligned dipole magnetic field. Here we present the development of a full three-dimensional thermosphere model coupled in both hemispheres to an axisymmetric magnetosphere model. This new coupled model is based on the two-dimensional MIT model presented in Yates et al., 2014. This coupled model is a critical step towards to the development of a fully coupled 3D MIT model. We discuss and compare the resulting thermospheric flows, energy balance and MI coupling currents to those presented in previous 2D MIT models.

  17. Kompressionstherapie bei Patienten mit Ulcus cruris venosum.

    Science.gov (United States)

    Dissemond, Joachim; Assenheimer, Bernd; Bültemann, Anke; Gerber, Veronika; Gretener, Silvia; Kohler-von Siebenthal, Elisabeth; Koller, Sonja; Kröger, Knut; Kurz, Peter; Läuchli, Severin; Münter, Christian; Panfil, Eva-Maria; Probst, Sebastian; Protz, Kerstin; Riepe, Gunnar; Strohal, Robert; Traber, Jürg; Partsch, Hugo

    2016-11-01

    Wund-D.A.CH. ist der Dachverband deutschsprachiger Fachgesellschaften, die sich mit den Thematiken der Wundbehandlung beschäftigen. Experten verschiedener Fachgesellschaften aus Deutschland, Österreich und der Schweiz haben nun einen aktuellen Konsens der Kompressionstherapie für Patienten mit Ulcus cruris venosum erstellt. In Europa ist das Ulcus cruris venosum eine der häufigsten Ursachen für chronische Wunden. Neben der konservativen und interventionellen Wund- und Venentherapie, ist die Kompressionstherapie die Basis der Behandlungsstrategien. Die Kompressionstherapie kann heute mit sehr unterschiedlichen Materialien und Systemen durchgeführt werden. Während in der Entstauungsphase insbesondere Verbände mit Kurzzugbinden oder Mehrkomponentensysteme zur Anwendung kommen, sind es anschließend überwiegend Ulkus-Strumpfsysteme. Eine weitere, bislang wenig verbreitete Alternative sind adaptive Kompressionsbandagen. Insbesondere für die Rezidivprophylaxe werden medizinische Kompressionsstrümpfe empfohlen. Durch die Vielzahl der heute zur Verfügung stehenden Behandlungsoptionen, kann für nahezu alle Patienten ein Konzept entwickelt werden, dass sich an den individuellen Bedürfnissen und Fähigkeiten orientiert und daher auch akzeptiert und durchgeführt wird. Die Kompressionstherapie ist für die Behandlung von Patienten mit Ulcus cruris venosum essentiell. In den letzten Jahren sind viele verschiedene Therapieoptionen verfügbar, die in den deutschsprachigen Ländern unterschiedlich angewendet oder durchgeführt werden. Daher soll dieser Expertenkonsens dazu beitragen, konkrete Empfehlungen für die praktische Durchführung der Kompressionstherapie von Patienten mit Ulcus cruris venosum darzustellen. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  18. Grosse Axiallager mit Hybridschmierung - Theoretische und experimentelle Betrachtungen

    DEFF Research Database (Denmark)

    Santos, Ilmar; Fuerst, Axel

    2003-01-01

    Der vorliegende Artikel praesentiert die Simulation eines grossen axialen Kippsegmentlagers unter Beruecksichtigung der hybriden Schmierung, d.h. gleichzeitige hydrodynamische und hydrostatische Schmierung. Ein Vergleich mit Messungen zeigt, dass fuer das betrachtete Lager mit 2,2 m Durchmesser die...

  19. Refrigeration systems of high temperature superconduction transformers for rail vehicles. Final report; Kaelteversorgung von Schienenfahrzeug-Transformatoren mit HT-Supraleitung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Glatthaar, R.

    2000-09-01

    The refrigeration system for the HTS-transformer was designed in cooperation with the transformer manufacturer and the requirements for the refrigerator have been determined. Several active and passive refrigeration systems were investigated, two of them have been elaborated more detailed. All the refrigeration systems are based on the concept of a liquid nitrogen flow rate of 1000 g/s passing through the 6 MVA transformer at a temperature of approx. 66 K and at a pressure of approx. 3 bars. The passive system uses as refrigerant source a tank with liquid nitrogen, weighing approx. 2300 kg and consuming 500 kg liquid nitrogen per day. After evaporating and preheating the nitrogen used exits to atmosphere with a vacuum pump. The active system elaborated more detailed applies a Stirling engine for refrigeration, will weigh 1600 kg and needs an average electric power of 25 kW. The refrigeration system for a transformer of ceramic superconducting material has significant advantages with regard to weight, power consumption and investment costs compared to a transformer of the same size manufactured as metallic superconductors. (orig.) [German] In Zusammenarbeit mit dem Transformatorhersteller wurden die Kaelteversorgung des HTS-Transformators konzipiert und die Anforderungen an die Kaelteanlage festgelegt. Verschiedene sogenannte passive und aktive Systeme fuer die Kaelteversorgung wurden untersucht, zwei davon naeher ausgearbeitet. Die Kuehlkonzepte sehen vor, dass fuer einen Transformator der Leistung 6 MVA ein Strom an fluessigem Stickstoff von 1000 g/s mit einer Temperatur von ca. 66 K und unter einem Druck von rund 3 bar durch den Transformator geleitet wird. Das passive System ist gekennzeichnet durch Einsatz eines Tanks fuer fluessigen Stickstoff als Kaeltequelle, hat ein Gewicht von etwa 2300 kg und einen Verbrauch an fluessigem Stickstoff von 500 kg/Tag. Der Stickstoff wird nach Verdampfung und Anwaermung mit Hilfe einer Vakuumpumpe an die Umgebung abgegeben

  20. Embedding of transmitted-heat pipelines in soil grout with coarse additives; Bettung von Fernwaermeleitungen in Boden-Moertel mit Grobzuschlagstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Berger, W.; Keller, H. [Forschungsinstitute fuer Tief- und Rohrleitungsbau Weimar e.V. (FITR) (Germany); Hoffmann, H.W. [Vorstandsbereich Technik VT1, MVV Energie AG, Mannheim (Germany)

    2003-07-01

    Greater re-use of excavated material in the infilling of pipeline trenches promises to produce economic benefits in pipeline construction. An R and D project by MVV Energie AG Mannheim is aimed at developing construction methods which will realize this potential for savings. Embedding of DN 150 plastic casing tubes (PCTs) with integrated sockets, which in some cases were wrapped with protective mats, in so-called Weimar construction mortar (WCM){sup *} with coarse additives of 0 to 56 mm particle size has been experimentally investigated as a function of the WCM's curing time and conveyed fluid temperature at the Forschungsinstitut fuer Tief- und Rohrleitungsbau Weimar e.V. (Weimar Underground and Pipeline Engineering Research Institute, German abbreviation: FITR). The test PCT objects were jacked across a distance of 75 mm in each case at rates of 10 and 30 mm/h, respectively, using hydraulic presses, in conformity with DIN EN 489 [1]. Exposure of the test items after completion of the tests demonstrated that neither the PE sheath of the PCTs nor either the sheathed or non-sheathed sockets had been damaged. (orig.) [German] Eine verstaerkte Wiederverwendung von Aushubmaterial bei der Verfuellung von Rohrleitungsgraeben verspricht wirtschaftliche Vorteile im Rohrleitungsbau. Ein FuE-Projekt der MVV Energie AG Mannheim zielt darauf ab, Bautechniken zu entwickeln, die dieses Einsparpotenzial erschliessen. Am Forschungsinstitut fuer Tief- und Rohrleitungsbau Weimar e. V. (FITR) wurde die Bettung von Kunststoffmantelrohren (KMR) DN 150 mit integrierten Muffen, die teilweise mit Schutzmatten ummantelt waren, in Weimarer Bau-Moertel trademark (WBM){sup *} mit Grobzuschlagstoffen 0 - 56 mm in Abhaengigkeit von der Verfestigungsdauer des WBM und der Mediumtemperatur experimentell untersucht. Dabei wurden die KMR-Probanden in Anlehnung an DIN EN 489 [1] mit Hilfe hydraulischer Pressen mit Geschwindigkeiten von 10 bzw. 30 mm/h jeweils ueber eine Distanz von 75 mm

  1. Wrestling with Pedagogical Change: The TEAL Initiative at MIT

    Science.gov (United States)

    Breslow, Lori

    2010-01-01

    In the late 1990s, the physics department at the Massachusetts Institute of Technology (MIT) had a problem. The department was responsible for teaching the two required physics courses that are part of the General Institute Requirements (GIRs), MIT's core curriculum--Physics I (mechanics, or in MIT parlance, 8.01) and Physics II (electricity and…

  2. MRI of focal liver lesions using a 1.5T turbo-spinecho technique compared with spinecho technique; MRT fokaler Leberlaesionen bei 1,5T Turbo-Spinecho im Vergleich mit der Spinecho-Technik

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, S. [Strahlenklinik und Poliklinik, Universitaetsklinikum Rudolf Virchow, Freie Univ. Berlin (Germany); Vogl, T.J. [Strahlenklinik und Poliklinik, Universitaetsklinikum Rudolf Virchow, Freie Univ. Berlin (Germany); Fischer, P. [Strahlenklinik und Poliklinik, Universitaetsklinikum Rudolf Virchow, Freie Univ. Berlin (Germany); Steger, W. [Strahlenklinik und Poliklinik, Universitaetsklinikum Rudolf Virchow, Freie Univ. Berlin (Germany); Neuhaus, P. [Chirurgische Klinik, Universitaetsklinikum Rudolf Virchow, Freie Univ. Berlin (Germany); Keck, H. [Chirurgische Klinik, Universitaetsklinikum Rudolf Virchow, Freie Univ. Berlin (Germany)

    1995-08-01

    In our study 35 patients with suspected focal liver lesions were examined. Standardised imaging protocol included a conventional T{sub 2}-weighted SE sequence (T{sub R}/T{sub E} = 2000/90/45, acquisition time = 10.20) as well as a T{sub 2}-weighted TSE sequence (T{sub R}/T{sub E} = 4700/90, acquisition time = 6.33). Calculation of S/N and C/N ratio as a basis of quantitative evaluation was done using standard methods. A diagnostic score was implemented to enable qualitative assessment. In 7% (n=2) the TSE sequence enabled detection of further liver lesions showing a size of less than 1 cm in diameter. Comparing anatomical details the TSE sequence was superior. S/N and C/N ratio of anatomic and pathologic structures of the TSE sequence were higher compared to results of the SE sequence. (orig./MG) [Deutsch] In einer prospektiven Studie wurden 35 Patienten mit fokalen Leberlaesionen untersucht. Das standardisierte Untersuchungsschema der Studie umfasste eine konventionelle SE-Sequenz mit T{sub R}/T{sub E} = 2000/90/45 (Akquisitionszeit = 10,20 min) sowie eine TSE-Sequenz mit T{sub R}/T{sub E} = 4700/90 (Akquisitionszeit = 6.33 min). Die Berechnung des S/R- sowie der K/R-Quotienten als Grundlage des quantitativen Vergleichs erfolgte nach Standardmethoden. Der qualitative Vergleich beider Sequenzen erfolgte durch Einschaetzung der Bildqualitaet anhand eines Stufenschemas. In 7% (n=2) konnten mit Hilfe der TSE-Sequenz mehr suspekte Laesionen detektiert werden. Ein Vergleich der Darstellung der anatomischen Detailerkennbarkeit zeigte Ueberlegenheit der TSE-Sequenz. Die S/R-Quotienten und K/R-Quotienten bezogen auf anatomische und pathologische Strukturen wiesen fuer die Turbo-Spinecho-Sequenz hoehere Werte auf. (orig./MG)

  3. Biomass energy

    International Nuclear Information System (INIS)

    Pasztor, J.; Kristoferson, L.

    1992-01-01

    Bioenergy systems can provide an energy supply that is environmentally sound and sustainable, although, like all energy systems, they have an environmental impact. The impact often depends more on the way the whole system is managed than on the fuel or on the conversion technology. The authors first describe traditional biomass systems: combustion and deforestation; health impact; charcoal conversion; and agricultural residues. A discussion of modern biomass systems follows: biogas; producer gas; alcohol fuels; modern wood fuel resources; and modern biomass combustion. The issue of bioenergy and the environment (land use; air pollution; water; socioeconomic impacts) and a discussion of sustainable bioenergy use complete the paper. 53 refs., 9 figs., 14 tabs

  4. Biomass Conversion

    Energy Technology Data Exchange (ETDEWEB)

    Decker, Steve [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brunecky, Roman [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lin, Chien-Yuan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Amore, Antonella [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wei, Hui [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chen, Xiaowen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tucker, Melvin P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Czernik, Stefan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sluiter, Amie D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Min [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Magrini, Kimberly A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Himmel, Michael E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sheehan, John [Formerly NREL; Dayton, David C. [Formerly NREL; Bozell, Joseph J. [Formerly NREL; Adney, William S. [Formerly NREL; Aden, Andy [Formerly NREL; Hames, Bonnie [Formerly NREL; Thomas, Steven R. [Formerly NREL; Bain, Richard L. [Formerly NREL

    2017-08-02

    Biomass constitutes all the plant matter found on our planet, and is produced directly by photosynthesis, the fundamental engine of life on earth. It is the photosynthetic capability of plants to utilize carbon dioxide from the atmosphere that leads to its designation as a 'carbon neutral' fuel, meaning that it does not introduce new carbon into the atmosphere. This article discusses the life cycle assessments of biomass use and the magnitude of energy captured by photosynthesis in the form of biomass on the planet to appraise approaches to tap this energy to meet the ever-growing demand for energy.

  5. MIT professor wins major international math prize

    CERN Multimedia

    Allen, S

    2004-01-01

    Mathematicians Isadore Singer of MIT and Sir Michael Francis Atiyah of the University of Edinburgh will share an $875,000 award as winners of the second Abel Prize, which some hope will come to be seen as a Nobel Prize for math.

  6. MITS Feed and Withdrawal Subsystem: operating procedures

    International Nuclear Information System (INIS)

    Brown, W.S.

    1980-01-01

    This document details procedures for the operation of the MITS (Machine Interface Test System) Feed and Withdrawal Subsystem (F and W). Included are fill with UF 6 , establishment of recycle and thruput flows, shutdown, UF 6 makeup, dump to supply container, Cascade dump to F and W, and lights cold trap dump, all normal procedures, plus an alternate procedure for trapping light gases

  7. MITS Feed and Withdrawal Subsystem: operating procedures

    International Nuclear Information System (INIS)

    Brown, W.S.

    1980-01-01

    This procedure details the steps involved in filling two of the four MITS (Machine Interface Test System) Feed and Withdrawal subsystem main traps and the Sample/Inventory Make-up Pipette with uranium hexafluoride from the ''AS RECEIVED'' UF 6 supply

  8. Nuclear matter as an MIT bag crystal

    International Nuclear Information System (INIS)

    Zhang, Q.; Derreth, C.; Schaefer, A.; Greiner, W.

    1986-01-01

    An MIT bag crystal model of nuclear matter is formulated. The energy bands of the quarks are calculated as a function of the overlap between adjacent bags. A clear indication of substantial overlap is found. Accordingly, infinite nuclear matter is more similar to a quark gas than to a nucleonic structure. (author)

  9. Editorial 3/2015: Handeln mit Symbolen

    Directory of Open Access Journals (Sweden)

    Alessandro Barberi

    2015-09-01

    Full Text Available Die paradigmatische Unterscheidung zwischen Sozial- und Kulturwissenschaften, die spätestens seit den 1980er Jahren eingehend diskutiert wurde, lässt sich anhand des Bereichs des Symbolischen auf den Punkt bringen: Ist das Symbolische nur ein Effekt von sozialen, ökonomischen oder medialen Strukturen einer gegebenen Gesellschaft oder reproduzieren sich Strukturen nur durch die symbolischen Handlungen der AkteurInnen innerhalb einer gegebenen Kultur? So hatte etwa der klassische "harte" Strukturalismus bei Claude Lévi-Strauss, Jacques Lacan und dem frühen Michel Foucault symbolische Ordnungen (und d. i. hier die Sprache als eine unbewusst determinierende Voraussetzung von menschlicher Interaktion begriffen, woraufhin mit dem Post- bzw. Neostrukturalismus die Rückkehr der individuellen Äußerung, der parole, des speech acts (und d. i. hier das Sprechen, also der symbolischen Handlung in den Mittelpunkt rückte. Medienpädagogisch ist diese Unterscheidung gerade dann von Interesse, wenn es darum geht, wie Lehrende und Lernende sich zueinander verhalten, interagieren und dabei eben mit Symbolen handeln. Insofern ist es bemerkenswert, dass – fast parallel zu Foucaults Unterscheidung von diskursiven und nicht-diskursiven Praktiken – auch Dieter Baacke 1973 von diskursiven und nicht-diskursiven Symbolen gesprochen hat. Denn – wie auch im Rahmen des "Symbolischen Interaktionismus" von George Herbert Mead argumentiert wurde – können Symbole nur im Rahmen einer gegebenen Diskursökonomie von AkteurInnen diskursiv ausgetauscht werden und konstituieren dabei Erfahrungen bzw. Wahrnehmungen und somit auch die soziale bzw. kulturelle Wirklichkeit. Insofern ist die Frage nach dem Symbolischen immer auch eine Frage nach den Möglichkeiten der Handlungstheorie (im Sinne Jürgen Habermas’ bzw. der Praxeologie (im Sinne Pierre Bourdieus. Die Redaktion der MEDIENIMPULSE geht in diesem Zusammenhang theoretisch und praktisch von Entscheidungsimpulse

  10. Behandlung von Herzrhythmusstörungen mit Magnesium bei Patienten mit Herzinsuffizienz

    Directory of Open Access Journals (Sweden)

    Wink K

    2002-01-01

    Full Text Available Die medikamentöse Behandlung von Herzrhythmusstörungen ist unbefriedigend, da bei guter Wirksamkeit durch die Proarrhythmie eine Verbesserung der Prognose gefährdet und nicht gesichert ist. Man kann davon ausgehen, daß Magnesiumsalze keine arrhythmogene Effekte aufweisen. Bei Patienten mit einer Herzinsuffizienz besteht häufig ein Mg-Mangel, der durch gastrointestinale Störungen, neurohormonale Regulationen, aber auch durch die Therapie (Diuretika,Digitalisbedingt ist. An Patienten mit einer Herzinsuffizienz müßte sich demnach zeigen lassen, ob die Mg-Substitution einen antiarrhythmischen Effekt aufweist. In fünf placebokontrollierten Studien konnte gezeigt werden, daß sich teil weise signifikant und mit ausreichen der Aussagekraft (PowerArrhythmien bei Patienten mit Herzinsuffizienz durch orale und parenterale Gabe von Mg-Salzen reduzieren lassen. Trotz Einschränkungen wie z.B. inadäquates Design, fehlende Vermeidung von Bias, ungenügende Vergleichbarkeit der Behandlungsgruppen, inadäquate Auswertung und ungenügende Berücksichtigung der Spontanvariation läßt sich aufgrund der Ergebnisse der Studien die Hypothese aufstellen, daß Magnesiumsalze bei Patienten mit Herzinsuffizienz Herzrhythmusstörungen günstig beeinflussen können. Prospektive, randomisierte,verblindete und kontrollierte konfirmatorische Studien mit ausreichenden Fallzahlen sind jedoch notwendig, um diese Hypothese zu bestätigen.

  11. The biomass

    International Nuclear Information System (INIS)

    Viterbo, J.

    2011-01-01

    Biomass comes mainly from forests and agriculture and is considered as a clean alternative energy that can be valorized as heat, power, bio-fuels and chemical products but its mass production is challenging in terms of adequate technology but also in terms of rethinking the use of lands. Forests can be managed to produce biomass but bio-fuels can also be generated from sea-weeds. Biomass appears very promising but on one hand we have to secure its supplying and assure its economical profitability and on another hand we have to assure a reasonable use of lands and a limited impact on the environment. The contribution of biomass to sustainable development depends on the balance between these 2 ends. (A.C.)

  12. Biomass [updated

    Energy Technology Data Exchange (ETDEWEB)

    Turhollow Jr, Anthony F [ORNL

    2016-01-01

    Biomass resources and conversion technologies are diverse. Substantial biomass resources exist including woody crops, herbaceous perennials and annuals, forest resources, agricultural residues, and algae. Conversion processes available include fermentation, gasification, pyrolysis, anaerobic digestion, combustion, and transesterification. Bioderived products include liquid fuels (e.g. ethanol, biodiesel, and gasoline and diesel substitutes), gases, electricity, biochemical, and wood pellets. At present the major sources of biomass-derived liquid fuels are from first generation biofuels; ethanol from maize and sugar cane (89 billion L in 2013) and biodiesel from vegetable oils and fats (24 billion liters in 2011). For other than traditional uses, policy in the forms of mandates, targets, subsidies, and greenhouse gas emission targets has largely been driving biomass utilization. Second generation biofuels have been slow to take off.

  13. Development of the Breitbrunn/Eggstaett natural gas deposit: Drilling of the 8 1/2 inch horizontal boreholes with drill-in fluid; Ausbau des Erdgasspeichers Breitbrunn/Eggstaett, hier: Bohren der 8 1/2{sup ''}-Horizontalstrecken mit Drill-in-Fluid

    Energy Technology Data Exchange (ETDEWEB)

    Neufeld, A.; Jakschies, R. [RWE-DEA Aktiengesellschaft fuer Mineraloel und Chemie, Hamburg (Germany); Gankin, V. [Baroid Drilling Fluids GmbH, Celle (Germany)

    2001-07-01

    During the second stage of development of the project, six horizontal boreholes of 584-960 m were drilled at a depth of about 2000 m using the drill-in fluid technique. Details are presented. It was found that extremely high differential pressures will pose no problem provided that the drilling technology and flushing system are well matched. [German] Waehrend der 2. Baustufe des Projektes Erdgasspeicher Breitbrunn/Eggstaett sind in Teufe von ca. 2000 m sechs Bohrungen mit Horizontalstrecken von 584-960 m in den bis ca. 3 MPa (30 bar) druckabgesenkten Speichergesteinen C und D abgeteuft worden. Die Gesamtabweichung vom Ansatzpunkt auf der Sammellokation betraegt bis zu 2 518 m. Die Horizontalstrecken sind mit Hilfe eines auf die Formation abgestimmten fluessigen Spuelungssystems, dem sogenannten Drill-in-Fluid, gebohrt. Hauptaugenmerk galt bei dieser Spuelung dem Aufbau eines extrem duennen, impermeablem Filterkuchens mit niedrigem Reibungsfaktor. Die im Bereich der 9 5/8{sup ''}-Rohrtour in den Bohrstrang integrierten Torque-Reducer und dem Spuelungssystem zugefuehrtes Schmlermittel trugen zu einer erheblichen Reduzierung der Reibkraefte bei. Durch Einbau von Non-Hanging Anti-Sticking-Stabilisatoren in den Bohrstrang ist die Gefahr des Festwerdens zusaetzlich minimiert. Der Einsatz von LWD Geosteering Equipment und begleitende mikropalaeontologische Untersuchungen ermoeglichten eine optimale Orientierung der abzuteufenden Strecken. Die Erfahrungen von insgesamt 6 Breitbrunn-Bohrungen belegen, dass extrem hohe Differenzdruecke kein Problem fuer das erfolgreiche Abteufen einer Bohrung sein muessen, wenn Bohrtechnik und Spuelungssystem sorgfaeltig aufeinander abgestimmt werden. (orig.)

  14. Biomass potential

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D [VTT Energy, Espoo (Finland)

    1997-12-31

    Biomass resources of the industrialised countries are enormous, if only a small fraction of set-aside fields were used for energy crops. Forest resources could also be utilised more efficiently than at present for large-scale energy production. The energy content of the annual net growth of the total wood biomass is estimated to be 180 million toe in Europe without the former USSR, and about 50 million toe of that in the EC area, in 1990. Presently, the harvesting methods of forest biomass for energy production are not yet generally competitive. Among the most promising methods are integrated harvesting methods, which supply both raw material to the industry and wood fuel for energy production. Several new methods for separate harvesting of energy wood are being developed in many countries. (orig.)

  15. Biomass potential

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, D. [VTT Energy, Espoo (Finland)

    1996-12-31

    Biomass resources of the industrialised countries are enormous, if only a small fraction of set-aside fields were used for energy crops. Forest resources could also be utilised more efficiently than at present for large-scale energy production. The energy content of the annual net growth of the total wood biomass is estimated to be 180 million toe in Europe without the former USSR, and about 50 million toe of that in the EC area, in 1990. Presently, the harvesting methods of forest biomass for energy production are not yet generally competitive. Among the most promising methods are integrated harvesting methods, which supply both raw material to the industry and wood fuel for energy production. Several new methods for separate harvesting of energy wood are being developed in many countries. (orig.)

  16. MRT of scaphoid pseudo-arthrosis using Gd-DTPA. Staging and clinical correlation; MRT der Skaphoidpseudarthrose mit Gd-DTPA. Stadieneinteilung und klinische Korrelation

    Energy Technology Data Exchange (ETDEWEB)

    Vogl, T.J. [Freie Univ. Berlin (Germany). Strahlenklinik und Poliklinik; Beutel, F. [Freie Univ. Berlin (Germany). Strahlenklinik und Poliklinik; Wilhelm, K. [LMU Muenchen (Germany). Abt. fuer Handchirurgie; Tempka, A. [Freie Univ. Berlin (Germany). Klinik fuer Unfall- und Wiederherstellungschirurgie; Schedel, H. [Freie Univ. Berlin (Germany). Strahlenklinik und Poliklinik; Haas, R. [Freie Univ. Berlin (Germany). Strahlenklinik und Poliklinik; Felix, R. [Freie Univ. Berlin (Germany). Strahlenklinik und Poliklinik

    1994-11-01

    During a period of two years, 134 patients with pseudo-arthrosis of the scaphoid were examined by conventional radiography and by MRI in the course of a prospective study. The aim of the study was to define radiological staging using contrast enhanced MRI in order to improve the prognostic criteria. All MRI examinations were carried out with a 1.5 Tesla scanner (SP63) using a surface coil and T{sub 1} weighted spin echo sequences in sagittal and frontal projection and frontal FLASH T{sub 2}-sequences and axial spin echo T{sub 2} sequences. The T{sub 1} weighted SE sequences in frontal projection were carried out before and after iv contrast (0.1 mmol Gd-DTPA/kg KG). All sequences were compared with conventional radiographs and the operative findings. Eight patients in stage 0 showed high signal intensity of both fragments in T{sub 1} weighted SE sequences and at surgery there was good vascularisation. In 22 cases there was reduced signal intensity in at least one fragment (stage I). 45 patients with scaphoid pseudo-arthrosis showed complete signal loss but marked contrast uptake with still vital nuclei at surgery (stage II). In 22 patients, there was no increase in signal intensity after contrast and complete loss of vitality of the fragments at surgery. Staging was not possible in 37 patients because of previous operative intervention. The use of contrast enhanced MRI provides additional information compared with conventional radiography or plain MRI. (orig.) [Deutsch] Im Rahmen einer prospektiven Studie wurden in einem Zeitraum von 2 Jahren 134 Patienten mit einer Skaphoidpseudarthrose (SPA) vergleichend konventionell roentgenologisch und magnetresonanztomographisch untersucht. Ziel der Studie war die Erstellung einer klinisch radiologischen Stadieneinteilung mit Hilfe der kontrastverstaerkten MRT zur Verbesserung von Prognosekriterien. Alle MRT-Untersuchungen wurden an einem 1,5 Tesla-Geraet (SP63) mittels einer Oberflaechenspule unter Verwendung von T{sub 1

  17. Grundlegende Steuerungsverfahren im heterogenen Logistiknetz mit Kanban

    Science.gov (United States)

    Dickmann, Eva; Dickmann, Philipp; Lödding, Hermann; Möller, Niklas; Rücker, Thomas; Schneider, Herfried M.; Zäh, Michael F.

    In vielen Unternehmen werden heterogene (verschiedene) Steuerungen in einem abgestimmten Konzept kombiniert. Je nach Anwendungsfall und Rahmenbedingungen werden Kombinationen allgemein bekannter Steuerungen oder Steuerungsvarianten gemischt eingesetzt, um eine optimale Steuerung für unterschiedliche Fälle zu erreichen. Hierbei stehen neben den bekannten und weit verbreiteten Methoden, wie Material Requirements Planning (MRP) oder Kanban, auch weniger bekannte oder neue Methoden zur Auswahl, wie die Produktionssteuerung mit dezentraler, bestandsorientierter Fertigungsregelung (DBF). Kanban ist ein simples und effizientes Steuerungskonzept, das in der klassischen Form für spezifische einfache Anwendungsfälle umsetzbar ist. Hochentwickelte Steuerungsalgorithmen können helfen, komplexe Abläufe optimal abzubilden. Mit einer grundlegenden Vereinfachung der Abläufe kann allerdings in vielen Fällen ein wesentlich stärkerer und umfassender Verbesserungseffekt erzielt werden. Die wesentliche Fragestellung sollte folglich lauten: Warum ist der Ablauf nicht mit einer einfachen Steuerung wie Kanban abzubilden? Um die Vorteile des Konzepts auch in untypischen Bereichen anwenden zu können, sind jedoch verschiedene Varianten oder Kanban-ähnliche Steuerungsmethoden entstanden. Darüber hinaus sind in der Praxis hybride Steuerungen im Einsatz, welche so kombiniert werden, dass die Zusammensetzung anspruchsvolle Eigenschaftsbilder noch exakt abbildet. In der Praxis basieren die Steuerungsentscheidungen nur zu einem kleinen Teil auf den eigentlichen Steuerungsalgorithmen, wie sie uns das MRP-System zur Verfügung stellt. Moderne Steuerungswelten" schließen alle relevanten Informationsquellen in eine heterogene Entscheidungsmatrix mit ein. Letztlich zählt nicht, ob die Entscheidung auf den Informationen aus dem MRP-System oder auf Softfacts basierend getroffen wurde, sondern nur, ob die Entscheidung erfolgreich war.

  18. Untersuchungen zum Potential eines Verbrennungsmotors mit Druckwellenlader

    OpenAIRE

    Binder, Emanuel

    2015-01-01

    Mithilfe der Abgasturboaufladung lässt sich der Kraftstoffverbrauch im Fahrzeugbetrieb durch das Anheben der spezifischen Motorleistung senken. Im Gegensatz zur mechanischen Aufladung verschlechtert sich jedoch mit der Abgasturbolaufladung das Ansprechverhalten. Eine Möglichkeit den Zielkonflikt von Kraftstoffverbrauch und Ansprechverhalten zu lösen ist es, den Abgasturbolader durch einen Druckwellenladers zu ersetzen. Dieser überträgt die Abgasenergie direkt auf die Frischluft in Form von Dr...

  19. The MIT miniaturized disk bend test

    International Nuclear Information System (INIS)

    Harling, O.K.; Lee, M.; Sohn, D.S.; Kohse, G.; Lau, C.W.

    1983-01-01

    A miniaturized disk bend test (MDBT) using transmission electron microscopy specimens for the determination of various mechanical properties is being developed at MIT. Recent progress in obtaining strengths and ductilities of highly irradiated metal alloys is reviewed. Possibilities exist for applying the MDBT approach to the determination of other mechanical properties. Progress in fatigue testing and in determination of the ductile-to-brittle transition temperature is reviewed briefly

  20. Biomass IGCC

    Energy Technology Data Exchange (ETDEWEB)

    Salo, K; Keraenen, H [Enviropower Inc., Espoo (Finland)

    1997-12-31

    Enviropower Inc. is developing a modern power plant concept based on pressurised fluidized-bed gasification and gas turbine combined cycle (IGCC). The process is capable of maximising the electricity production with a variety of solid fuels - different biomass and coal types - mixed or separately. The development work is conducted on many levels. These and demonstration efforts are highlighted in this article. The feasibility of a pressurised gasification based processes compared to competing technologies in different applications is discussed. The potential of power production from biomass is also reviewed. (orig.) 4 refs.

  1. Biomass IGCC

    Energy Technology Data Exchange (ETDEWEB)

    Salo, K.; Keraenen, H. [Enviropower Inc., Espoo (Finland)

    1996-12-31

    Enviropower Inc. is developing a modern power plant concept based on pressurised fluidized-bed gasification and gas turbine combined cycle (IGCC). The process is capable of maximising the electricity production with a variety of solid fuels - different biomass and coal types - mixed or separately. The development work is conducted on many levels. These and demonstration efforts are highlighted in this article. The feasibility of a pressurised gasification based processes compared to competing technologies in different applications is discussed. The potential of power production from biomass is also reviewed. (orig.) 4 refs.

  2. Electrical and optical measurements on a single InAs quantum dot using ion-implanted micro-LEDs; Elektrische und optische Untersuchungen an einem einzelnen InAs-Quantenpunkt mit Hilfe ionenstrahlimplantierter Mikro-LEDs

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, R.F.

    2006-10-19

    The goal of this present thesis was to electrically and optically address a single InAs quantum dot. Therefore micro-structured quantum-dot-LEDs with an emission area smaller than 1 {mu}m{sup 2} were developed. One major part of this work was contributed to optimizing several steps of the micro-LED fabrication process. To be able to compare the electrical conductivity obtained from Hall-measurements to the expected values, the implantation profile was investigated both theoretically and experimentally. As the thermal annealing step had to be performed in the growth chamber of the MBE-system several annealing parameters had to be modified to achieve optimum electrical conductivity and quantum dot growth. For one of the Be-implanted pin-samples the principle of the single-quantum-dot-LEDs could be proved. The smallest device of this sample, with nominal stripe widths of 150 nm (FIB-stripe) and 400 nm (top-stripe), showed typical features of a single quantum dot. In the high-resolution EL-spectra of this device three extremely sharp emission lines were observed which clearly could be assigned to the electron-hole recombination from a single quantum dot. To further identify the origin of these lines their optical intensities were plotted against the injection current. From this plot it could be deduced, that the first evolving line clearly belongs to the simple exciton 1X. The following lines could be assigned to the decay of the biexciton 2X and the triexciton 3X{sub s}, respectively. With increasing bias all three lines show a pronounced red-shift due to the quantum confined Stark effect (QCSE). To identify the charge state of the observed excitonic lines, additional high-resolution IV curves were taken. (orig.)

  3. Target values for indoor air quality. Judging indoor air quality by means of aggregate volatile organic compounds (TVOC value); Richtwerte fuer die Innenraumluft. Die Beurteilung der Innenraumluftqualitaet mit Hilfe der Summe der fluechtigen organischen Verbindungen (TVOC-Wert)

    Energy Technology Data Exchange (ETDEWEB)

    Seifert, B. [Umweltbundesamt Berlin (Germany). Inst. fuer Wasser-, Boden- und Lufthygiene

    1999-03-01

    The article discusses the existing bases for the derivation and use of assessment criteria for TVOC concentrations. For enhanced understanding, some aspects of VOC analytics are dealt with beforehand. (orig./MG) [Deutsch] Im vorliegenden Artikel werden die vorhandenen Grundlagen fuer die Ableitung und Verwendung von Bewertungskriterien fuer TVOC-Konzentrationen diskutiert. Zum besseren Verstaendnis werden einleitend einige Aspekte der VOC-Analytik eroertert. (orig/MG)

  4. Disproportion of organic wastes into biogas by means of a tow-stage, thermophilic fermentation process. Final report. Disproportionierung organischer Abfaelle zu Biogas mit Hilfe eines zweistufigen, thermophilen Gaerverfahrens. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Troesch, W

    1985-04-01

    The work carried through in the period of report January 1 - December 31, 1985 comprised the following: Impacts of the composition of the synthetic substrate on the space-and-time-related yield of microbial methane production, and further experiments for the characterization of screened methanogenic bacteria. Screening for co-cultures decomposing propionic acid was taken up, in order to elucidate problems encountered in tracing the decomposition paths of propionic acid in mixed cultures. Comparative experiments were conducted with different reactor configurations for obtaining methane from cow and bullock liquid manures; these provided new results in comparison with data published, as far as gas yield and gas productivity as a function of space load are concerned. (orig.)

  5. QUANTOM - improved tumor diagnosis by quantitative evaluation of tomography data using digital 3D image processing. Final report; QUANTOM - Verbesserung der Tumordiagnostik durch quantitative Auswertung von Tomographiedaten mit Hilfe der digitalen 3D-Bildverarbeitung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Morfill, G

    2001-07-01

    Nonlinear techniques are applied to tasks in medical image processing. Using the so-called scaling index method and scaling vector method segmentation and detection algorithms are developed in order to recognise and measure tumors in three-dimensional tomographic data sets. It is shown that pulmonary nodules can well be detected in the lung only by analysing their morphological structure. Especially the nodules can be discriminated from the bronchovascular structures, which have the same intensity in the data sets. Newly developed segmentation algorithms, with which an exact volumetric assessment of tumors is made possible, are presented. It turns out that an algorithm, which combines elements from the watershed-transformation and from region growing techniques, yields the best results in terms of accuracy, transparency and reproducibility. The clinical valence of the volumetry is illustrated with studies concerning the response evaluation of tumors of the gastrointestinal tract during (chemo-)therapy. It turns out that the results obtained with an exact three-dimensional volume determination are in much better agreement with the histological gold standard than those obtained with simple conventional, planimetric measurements. Furthermore the specificity of the prediction for the response to a chosen therapy can be significantly increased using CT-volumetry and PET-measurements. Therefore, the number of therapeutically questionable operations can be reduced. Further possible fields of application for the newly developed methods are presented. (orig.)

  6. Anacharsis in der Diskussion über das Kriterion der Wahrheit in Sextus Empiricus' Adversus Mathematicos: Versuch einer Erläuterung mit Hilfe verschiedener Tools zur Visualisierung von Kookkurrenzen (eAQUA/eXChange TagPies

    Directory of Open Access Journals (Sweden)

    Friedrich Meins

    2017-07-01

    Full Text Available The paper argues that the (obviously fictional quote attributed to the legendary Scythian sage Anacharsis in the work of the sceptic Sextus Empircus is more likely to be understood as some kind of ironical twist than as a substantial hint towards a specific philosophical background: At the time of Sextus, Anacharsis was best known as the proverbial wise man. As such, he denies the existence of a criterion of truth that is discussed in the respective passages. At the same time, the figure of the wise man itself is seen as a criterion of truth by several dogmatic philosophers Sextus is arguing against. This leads to a paradoxical situation in which the criterion denies the existence of the criterion explicitly, and, on a more structural level, even the wise man per se the existence of wise men in general. Several tools for the visualization of significant co-occurrences such as the eAQUA co-occurrence-analysis or the eXchange TagPies are used supportively to show that in the time of Sextus the connections between the figure of Anacharsis and the concept of sagacity are indeed much stronger than those between Anacharsis and any specific philosophical school.

  7. Evaluation of radiation exposure in interventional radiology (IR) using active personal dosimeters (APD); Evaluierung der Strahlenexposition in der Interventionellen Radiologie (IR) mit Hilfe von Aktiv-Personen-Dosimetern (APD)

    Energy Technology Data Exchange (ETDEWEB)

    Neugschwandtner, K. [KH Hietzing mit NZ Rosenhuegel, Wien (Austria). Inst. fuer Krankenhausphysik; TU Wien (Austria). Atominstitut; Freund, R. [KH Hietzing mit NZ Rosenhuegel, Wien (Austria). Inst. fuer Krankenhausphysik; Mertikian, G. [KH Hietzing mit NZ Rosenhuegel, Wien (Austria). Inst. fuer Radiologie; Poljanc, K. [TU Wien (Austria). Atominstitut; Ibi, B. [KA Rudolfstiftung, Wien (Austria). Stabstelle Medizinphysik

    2015-07-01

    Increased awareness of high personal dose exposure of medical staff in interventional radiology (IR) demands an assessment of radiation protection procedures. Mandatory dose monitoring systems do not allow to relate dose to specific actions of the staff as they just accumulate a total dose per month. Doses of head and limbs are expected to be high as those body parts which are not protected by the lead apron. We decided to use a measuring system by Unfors, RaySafe i2 which is built for real- time- dosimetry of scattered radiation in pulsed X-ray fields. An increased dose of the body side closer to the X-ray source (left body side) was detected. This is due to the position and the posture of the radiologist during intervention. Separating the phases of digital subtraction angiography (DSA) from those of fluoroscopy allowed not only to list the separate accumulated doses, but showed as well a big difference in dose rate. The measurements revealed the need of an improvement of common radiation protection, especially while DSA.

  8. Characterization of new materials in chromatography and fuel cell development by modern NMR techniques; Charakterisierung neuer Materialien in der Chromatographie und Brennstoffzellen-Forschung mit Hilfe moderner NMR-Techniken

    Energy Technology Data Exchange (ETDEWEB)

    Schauff, S.

    2007-12-28

    New materials, suitable for the application in reversed phase liquid chromatography and fuel cell membranes, were characterized regarding their structure and dynamic properties using solid-state and suspended-state NMR spectroscopy. Both methods were found to be suitable to study the dynamic behaviour, the first to observe intrinsic mobilities of phosphonic acids, the second to monitor interaction processes taking place in a chromatography-like system. Several phosphonic acids, which are promising materials for high temperature fuel cell membranes, were investigated with respect to proton mobility and transport applying various solid-state NMR methods. In addition, water uptake and its effects on anhydride formation were studied on samples that were equilibrated with saturated salt solutions. For PVPA substantial, reversible anhydride formation was found, while MePA did not show condensation. These results show that the relation between hydrogen bond strength and proton mobility is complex. In particular, this work demonstrates that the application of simple 1D 1H and 2H NMR experiments provides easy access to information about proton/deuteron mobility on short time scales, needed for an identification of materials with high intrinsic proton conductivities. Stationary phases for reversed phase liquid chomatography were characterized by solid-state NMR spectroscopy, and their influence on different analytes was studied using suspendedstate HR-MAS NMR spectroscopy. Suspended-state HR-MAS NMR spectroscopy showed to be suitable to model the separation process of analytes on chromatographic sorbents. For this, the stationary phase was suspended in a solution of analyte dissolved in mobile phase. MePhSucc showed a peak doubling of the CH2 group in presence of monomeric C18 phase, leading to the coexistence of a narrow and a broadened peak. Thus, the dynamic interactions of MePhSucc towards the stationary phase, and under the influence of the mobile phase, could be directly observed using 1H HR-MAS NMR spectroscopy. Changing the mobile phase concentration and composition caused a shift of the broadened peak towards the narrow CH2 signal, resulting in the fusion of both. These effects were explained by two different theories, one of which substantiates with polarity differences, the other with the winding up of the C18 alkyl chains. Separating interactions were also investigated using the suspended-state STD HR-MAS NMR technique that unveiled the part of analyte molecule interacting with the chromatographic sorbent. Furthermore, the molecular recognition of a particulate and a monolithic MIP towards their respective template molecules was investigated using 1H STD HR-MAS NMR spectroscopy. The obtained data proved superiority of the respective MIP over the NIP, and definite knowledge of the interaction site at the analyte molecules could be gained. Differences between specific and non-specific binding could be observed. (orig.)

  9. Enhancemenent of the energy efficiency by means of the energy efficiency commitment system. Brief: Energy efficiency commitment system (EnEffVSYS); Steigerung der Energieeffizienz mit Hilfe von Energieeffizienz-Verpflichtungssystemen. Kurz: Energieeffizienz-Verpflichtungssysteme (EnEffVSys)

    Energy Technology Data Exchange (ETDEWEB)

    Agricola, Annegret C.; Joest, Steffen; Czernie, Marc; Heuke, Reemt; Kalinowska, Dominika; Peters, Sebastian [Deutsche Energie-Agentur GmbH, Berlin (Germany); Perner, Jens; Bothe, David [Frontier Economics Ltd., Koeln (Germany)

    2012-12-15

    The origin of the contribution under consideration is the new EU energy efficiency regulation (EU-EnEff-RL) which is valid since 4th December 2012. This regulation emphasizes the increase of the energy efficiency in Europe. Under this aspect, the contribution under consideration reports on (a) the framework conditions for energy efficiency and energy consumption in Europe; (b) the development of the energy consumption and energy efficiency in the past; (c) the economic potentials of energy efficiency in Germany up to the year 2020; (d) whether the advancement of the German, market based approach or the implementation of the energy efficiency commitment system in Germany would be the better way in order to reach the energy efficiency targets derived from the EU energy efficiency regulation.

  10. Gas production by means of fracking.; Gasfoerderung durch Fracking. Mit Hilfe des Fracking-Verfahrens wird unkonventionelles Gas in grosser Tiefe gewonnen. Ein Bericht aus Texas beleuchtet die Gefahren fuer Mensch und Umwelt

    Energy Technology Data Exchange (ETDEWEB)

    Sieg, Klaus

    2011-09-15

    Using the fracking method, unconventional gas is produced in great depths. In Germany, fracking still is in its infancy, and already is extremely controversial. A report from Texas highlights the dangers for man and environment. For years, in Texas natural gas was solved from rock layers with high pressure water and chemicals.

  11. North Sea oil and Britain's balance of payments. An investigation with the aid of a simulation model. Das Nordseeoel und die britische Zahlungsbilanz. Eine Untersuchung mit Hilfe eines Simulationsmodells

    Energy Technology Data Exchange (ETDEWEB)

    Juergensen, H [ed.

    1979-01-01

    An introduction outlining the complex of problems and discussing the chosen method is followed by the development of a computerized simulation model. Starting from oil exploration, the whole process of opening, financing, production, and taxation of discovered North Sea oil fields is analysed and modelled up to the effects they have on the balance of payments. The statements are characterized by the opinion that even formalized, complex model relations can be delivered in a way which is intelligible to all. In the final part, predicted results are presented and discussed in detail, which were achieved under conditions alternatively assumed for the future on the basis of the model calculations. Furthermore, in the annexes flowcharts and the FORTRAN program of the model as well as comprehensive tables of results are shown. With this work, the author breaks through the narrow concept of a pure simulation model. For the first time he shows opportunities and limit, the set to the restoration of Britain's balance of payments by means of North Sea oil.

  12. Study into the status of co-combustion of sewage sludge, biomass and household refuse in coal-fired power stations. Final report; Untersuchungen zum Stand der Mitverbrennung von Klaerschlamm, Hausmuell und Biomasse in Kohlekraftwerken. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hein, K.R.G.; Spliethoff, H.; Scheurer, W. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen; Seifert, H.; Richers, U. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer technische Chemie - Thermische Abfallbehandlung

    2000-03-01

    sludge in coal-fired power stations is state of the art and carried out at various sites. It can be expected that co-combustion of waste wood will be introduced in the future on a wider scale. For both supplementary fuels, there was a fuel market already established, or it could build itself on available structures. The practice of these projects brought about ample experience with the supply of the supplementary fuels and the effects of co-combustion on system operation. The knowledge thus gained can be used when further supplementary fuels shall be introduced in the large power-station park of Germany. The facts and data compiled point out in addition where possibilities for improvement exists and which subjects require further investigation. (orig.) [German] Die Mitverbrennung von Abfaellen in Kraftwerken bietet sich als eine zusaetzliche Option zur thermischen Behandlung bestimmter Abfallstoffe und damit zur Einhaltung der Vorgaben der TA-Siedlungsabfall an. In der vorliegenden Untersuchung ist der Wissensstand zur Mitverbrennung in Kohlekraftwerken fuer Klaerschlamm, Biomasse und ausgewaehlte Abfallstoffe zusammengefasst. Die Ergebnisse sollen eine umfangreiche Hilfe zur Beurteilung der Verfahren zur Verfuegung stellen, um so einen Beitrag zur Beseitigung von Unsicherheiten, sowohl bei Anlagenbetreibern als auch auf der Seite der Aufsichtsbehoerden, zu leisten. Ausserdem sollen mit Hilfe der erarbeiteten Erkenntnisse bestehende Wissensluecken, der notwendige Forschungs- und Entwicklungsbedarf und der Handlungsbedarf des Gesetzgebers aufgezeigt werden. Durch direkte Recherche bei Entsorgungsunternehmen, den Kraftwerksbetreibern und auch den Genehmigungs- und Aufsichtsbehoerden wurde die Literaturarbeit ergaenzt und ein umfassendes Bild der aktuellen Situation in Deutschland erarbeitet. Es werden die gesetzlichen Rahmenbedingungen der Mitverbrennung und Zusatzbrennstoffpotentiale aufgezeigt. Die verfahrenstechnische Verwirklichung der Mitverbrennung wird dargestellt

  13. MIT-Skywalker: On the use of a markerless system.

    Science.gov (United States)

    Goncalves, Rogerio S; Hamilton, Taya; Krebs, Hermano I

    2017-07-01

    This paper describes our efforts to employ the Microsoft Kinect as a low cost vision control system for the MIT-Skywalker, a robotic gait rehabilitation device. The Kinect enables an alternative markerless solution to control the MIT-Skywalker and allows a more user-friendly set-up. A study involving eight healthy subjects and two stroke survivors using the MIT-Skywalker device demonstrates the advantages and challenges of this new proposed approach.

  14. Biomass Characterization | Bioenergy | NREL

    Science.gov (United States)

    Characterization Biomass Characterization NREL provides high-quality analytical characterization of biomass feedstocks, intermediates, and products, a critical step in optimizing biomass conversion clear, amber liquid Standard Biomass Laboratory Analytical Procedures We maintain a library of

  15. [Bernt Ahrenholz : Verweise mit Demonstrativa im Gesprochenen Deutsch...] / Klaus Geyer

    Index Scriptorium Estoniae

    Geyer, Klaus

    2008-01-01

    Arvustus: Ahrenholz, Bernt. Verweise mit Demonstrativa im gesprochenen Deutsch : Grammatik, Zweitspracherwerb und Deutsch als Fremdsprache. Berlin ; New York : de Gruyter, 2007. (Linguistik - Impulse & Tendenzen ; 17)

  16. Biomass shock pretreatment

    Science.gov (United States)

    Holtzapple, Mark T.; Madison, Maxine Jones; Ramirez, Rocio Sierra; Deimund, Mark A.; Falls, Matthew; Dunkelman, John J.

    2014-07-01

    Methods and apparatus for treating biomass that may include introducing a biomass to a chamber; exposing the biomass in the chamber to a shock event to produce a shocked biomass; and transferring the shocked biomass from the chamber. In some aspects, the method may include pretreating the biomass with a chemical before introducing the biomass to the chamber and/or after transferring shocked biomass from the chamber.

  17. Study on the planning of a demonstration plant for hydrogen fuel production by electrolysis using caching in salt caverns under pressure; Studie ueber die Planung einer Demonstrationsanlage zur Wasserstoff-Kraftstoffgewinnung durch Elektrolyse mit Zwischenspeicherung in Salzkavernen unter Druck

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-02-05

    In a two year research project the long-term storage of hydrogen as energy carrier has been assessed in detail for large renewable electricity quantities in underground storage caverns in Germany. Next to a regions analysis for potential storage sites, the benchmarking against other large scale storage concepts, a comparative and perspective analysis of alkaline and PEM-electrolysers also potential business cases for Power-to-Hydrogen in the mobility sector as well as for the chemical, electricity and natural gas industry have been analysed. [German] Durch den geplanten Ausbau der Stromerzeugung aus fluktuierenden, erneuerbaren Energien in Deutschland ruecken Speichertechnologien fuer elektrische Energie immer staerker in den Fokus des industriellen und politischen Interesses. Eine vielversprechende Moeglichkeit fuer eine Langzeitspeicherung bei hohen Anteilen von Wind- und Photovoltaikanlagen sind Speichertechnologien wie die Wasserstoffspeicherung mit Hilfe von Wasserelektrolyseuren. Diese koennen erneuerbaren Strom in grossen Mengen und bei entsprechender Steuerung selektiv in Zeiten mit hohem Dargebot z.B. an Windstrom chemisch speichern. Der gespeicherte Wasserstoff kann dann entweder zu einem spaeteren Zeitpunkt wieder rueckverstromt oder direkt stofflich verwertet werden, z.B. als Kraftstoff fuer den Verkehrssektor, als chemischer Rohstoff oder fuer den Hausenergiebereich durch Einspeisung in das Erdgastransportnetz. Thema der vorliegenden Studie sind Analysen und Planungen fuer die Erprobung des Gesamtsystems ''Wasserstoff-Elektrolyse-Speicherung'' in energiewirtschaftlich relevanten Dimensionen. Dazu werden mit einem neuen Ansatz techno-oekonomische Entwicklungspfade fuer Wasserstoff-Systeme unterschiedlicher Groesse und Technologien charakterisiert und technologische Risiken bei der Realisierung dieser Systeme identifiziert und bewertet. Diese Arbeiten werden ergaenzt durch Arbeiten auf dem Gebiet der Salzkavernenspeicherung in Form

  18. Biomass Energy Basics | NREL

    Science.gov (United States)

    Biomass Energy Basics Biomass Energy Basics We have used biomass energy, or "bioenergy" keep warm. Wood is still the largest biomass energy resource today, but other sources of biomass can landfills (which are methane, the main component in natural gas) can be used as a biomass energy source. A

  19. MIT - Mighty Steps toward Energy Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Settlemyre, Kevin [Sustainable IQ, Inc., Arlington, MA (United States); Bosnic, Zorana [HOK, San Francisco, CA (United States)

    2012-07-01

    Massachusetts Institute of Technology (MIT) partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce energy consumption by at least 30% as part of DOE’s Commercial Building Partnerships (CBP) Program.1 Lawrence Berkeley National Laboratory (LBNL) provided technical expertise in support of this DOE program. MIT is one of the U.S.’s foremost higher education institutions, occupying a campus that is nearly 100 years old, with a building floor area totaling more than 12 million square feet. The CBP project focused on improving the energy performance of two campus buildings, the Ray and Maria Stata Center (RMSC) and the Building W91 (BW91) data center. A key goal of the project was to identify energy saving measures that could be applied to other buildings both within MIT’s portfolio and at other higher education institutions. The CBP retrofits at MIT are projected to reduce energy consumption by approximately 48%, including a reduction of around 72% in RMSC lighting energy and a reduction of approximately 55% in RMSC server room HVAC energy. The energy efficiency measure (EEM) package proposed for the BW91 data center is expected to reduce heating, ventilation, and air-conditioning (HVAC) energy use by 30% to 50%, depending on the final air intake temperature that is established for the server racks. The RMSC, an iconic building designed by Frank Gehry, houses the Computer Science and Artificial Intelligence Laboratory, the Laboratory for Information and Decision Systems, and the Department of Linguistics and Philosophy.

  20. Electrifying biomass

    International Nuclear Information System (INIS)

    Kusnierczyk, D.

    2005-01-01

    British Columbia's (BC) energy plan was outlined in this PowerPoint presentation. BC Hydro is the third largest electric utility in Canada with a generating capacity of 11,000 MW, 90 per cent of which is hydro generation. Various independent power project (IPP) biomass technologies were outlined, including details of biogas, wood residue and municipal solid waste facilities. An outline of BC Hydro's overall supply mix was presented, along with details of the IPP supply mix. It was suggested that the cancellation of the Duke Point power project has driven growth in the renewable energy sector. A chart of potential energy contribution by resource type was presented, as well as unit energy cost ranges. Resources included small and large hydro; demand side management; resource smart natural gas; natural gas; coal; wind; geothermal; biomass; wave; and tidal. The acquisition process was reviewed. Details of calls for tenders were presented, and issues concerning bidder responsibility and self-selection were examined. It was observed that wood residue presents a firm source of electricity that is generally local, and has support from the public. In addition, permits for wood residue energy conversion are readily available. However, size limitations, fuel risks, and issues concerning site control may prove to be significant challenges. It was concluded that the success of biomass energy development will depend on adequate access and competitive pricing. tabs., figs

  1. Thyroid hemiagenesis with immunthyropathy; Schilddruesenhemiagenesie mit Immunthyreopathie

    Energy Technology Data Exchange (ETDEWEB)

    Mikosch, P.; Gallowitsch, H.J.; Kresnik, E.; Lind, P. [Landeskrankenhaus Klagenfurt (Austria). Abt. fuer Nuklearmedizin und Spezielle Endokrinologie

    1999-06-01

    A case of Graves` disease occurring in a patient with hemiagenesis is presented. The detection of the rare occurrence of a congential hemiagenesis is often made by either clinical symptoms of thyroid dysfunction or anatomical abnormalities such as nodular goiter. The symptoms of hyperthyroidism in the current case led to the diagnostic confirmation by scintiscanning and ultrasonography of an absent lobe. Anti-thyroid antibody studies documented the presence of Graves` disease within the remaining lobe. (orig.) [Deutsch] Die Hemiagenesie der Schilddruese stellt eine seltene angeborene Veraenderung dar. Diese angeborene Variante der Schilddruesenanlage wird in den meisten Faellen durh Auffaelligkeiten der Funktion oder der Groesse des vorhandenen Schilddruesenlappens zufaellig gefunden. Der Fall einer 57jaehrigen Frau mit einer Schilddruesenhemiagenesie in Kombination mit einer Immunthyreopatie Basedow wird vorgestellt. Die Zuweisung der Patientin zur Untersuchung erfolgte wegen einer Schilddruesenueberfunktion. Die erforderlichen diagnostischen Schritte zur Erstellung dieser beiden Schilddruesenveraenderungen waren ein 99m-Tc-Schilddruesenszintigramm, Ultraschall und Laborparameter der Schilddruese (fT4, TT3, bTSH, TAK, TPO, TRAK). (orig.)

  2. Physik gestern und heute: Visualisierung mit der Schlierenmethode

    Science.gov (United States)

    Heering, Peter

    2006-07-01

    Der Name des österreichischen Forschers Ernst Mach ist heute noch mit der Schallgeschwindigkeit verbunden. Diese Auszeichnung resultiert aus Machs Untersuchungen, wie sich Projektile mit Überschallgeschwindigkeit durch die Luft bewegen. Gerade in jüngster Zeit hat die Anwendung derartiger Methoden durch technische Modifikationen wieder einen Aufschwung erfahren.

  3. MACH MIT: Deutsches Wochenende am Karlsfluss (MACH MIT: a German Week-End on the Charles River).

    Science.gov (United States)

    Reizes, Sonia; Kramsch, Claire J.

    1980-01-01

    Describes a joint high school/college pilot program planned by Massachusetts foreign language teachers and hosted by M.I.T. The success of the program dubbed "MACH MIT Total Immersion German Weekend" is attributed to the concept of active involvement, which was implemented through games, seminars, shows, cooking and other activities.…

  4. Biomass gasification in a circulating fluidized bed; Vergasung von Biomasse in der zirkulierenden Wirbelschicht

    Energy Technology Data Exchange (ETDEWEB)

    Ising, M; Hoelder, D; Backhaus, C; Althaus, W [Fraunhofer Inst. fuer Umwelt-, Sicherheits- und Energietechnik UMSICHT, Oberhausen (Germany)

    1998-09-01

    Biomass gasification in a circulating fluidized bed, in combination with a gas engine or gas burner, is a promising option for energetic use of biomass. Economic efficiency analyses on the basis of the UMSICHT plant show that this technology for combined heat and power generation from biomass is promising also for the range below 10 MW. The economic situation of any plant must be considered for the specific boundary conditions imposed by the power supply industry. The feasibility of the process was tested in a demonstration plant at Oberhausen. The plant was optimized further in extensive test series, and a number of tar reduction processes were investigated and improved on. The authors now intend to prove that gasification in a circulating fluidized bed combined with a gas engine cogeneration plant is feasible in continuous operation. (orig./SR) [Deutsch] Die Vergasung von Biomasse in der zirkulierenden Wirbelschicht ist in Kombination mit einem Gasmotor oder einem Gasbrenner eine vielversprechende Option fuer die energetische Biomassenutzung. Wirtschaftlichkeitsbetrachtungen auf Basis der UMSICHT-Anlage zeigen, dass diese Technologie fuer die gekoppelte Strom- und Waermeerzeugung aus Biomasse auch im Leistungsbereich unter 10 MW grosse Chancen verspricht. Dabei ist die oekonomische Situation einer Anlage im Einzelfall unter Beachtung der energiewirtschaftlichen Randbedingungen zu beurteilen. Durch den Betrieb einer Demonstrationsanlage in Oberhausen konnte die Funktion des Verfahrens nachgewiesen werden. In weiteren umfangreichen Versuchsreihen werden die Anlage weiter optimiert und verschiedene Konzepte zur Teerminderung untersucht und weiterentwickelt. Angestrebt ist der Nachweis des Dauerbetriebs von ZWS-Vergasung zusammen mit dem Gasmotoren-BHKW. (orig./SR)

  5. Treatment factors influencing survival in pancreatic carcinoma; Der Einfluss der Therapie auf das Ueberleben von Patienten mit Pankreaskarzinom. Eine Analyse von Einzelfaktoren

    Energy Technology Data Exchange (ETDEWEB)

    Warszawski, N.; Warszawski, A.; Schneider, B.M.; Roettinger, E.M. [Ulm Univ. (Germany). Abt. Radiologie 2 (Strahlentherapie); Link, K.H.; Gansauge, F. [Ulm Univ. (Germany). Abt. fuer Allgemeinchirurgie; Lutz, M.P. [Ulm Univ. (Germany). Abt. Innere Medizin 1

    1999-07-01

    . Zusaetzlich erhielten 37 Patienten mehrere Chemotherapiezyklen mit Mitoxantron, 5-Fluorouracil und Cis-Platin, entweder intravenoes (14/38) oder intraarteriell (23/38). Der Einfluss von Behandlungsfaktoren auf das Ueberleben wurde untersucht. Die biologisch effektive Dosis wurde mit Hilfe des linearquadratischen Models ({alpha}/{beta}=25 Gy) berechnet bei einem taeglichen Wirkungsverlust von 0,85 Gy ab Tag 28. Ergebnisse: Behandlungsfaktoren, die das Ueberleben beeinflussten, waren die Resektion (p=0,02), die strahlentherapeutische Behandlungseit (p=0,03) und die biologisch effektive Dosis (p<0,002). Gesamtdosis und Applikationsart der Chemotherapie hatten keinen signifikanten Einfluss. Das strahlentherapeutische Behandlungsvolumen wies eine negative Korrelation (r=-0,5 mit p=0,06) mit dem Geamtueberleben auf, ohne dass eine Korrelation zwischen Tumorgroesse, Tumorstadium und Behandlungsvolumen nachweisbar war. In der multivariaten Analyse behielt allein die biologisch effektive Dosis mit p=0,02 ihre Signifikanz. Schlussfolgerungen: Neben der Resektion beeinflusst die biologisch effektive Dosis das Ueberleben der Pankreaskarzinompatienten. Das Bestrahlungsvolumen soll so klein wie moeglich gehalten und eine Unterbrechung der Strahlentherapie soll vermieden werden. (orig.)

  6. Peniskarzinom mit exulzerierten Lymphknotenmetastasen links inguinal

    Directory of Open Access Journals (Sweden)

    Presich K

    2003-01-01

    Full Text Available Im Oktober 2001 wurde ein 53jähriger Patient mit ausgedehnten exulzerierten Lymphknotenmetastasen rechts inguinal an einer auswärtigen chirurgischen Abteilung vorgestellt. Im Rahmen der Durchuntersuchung fand sich eine verhärtete, von einem nicht retrahierbaren Präputium verdeckte Glans als mögliches Primum. Eine Circumcision sowie Biopsie aus der Glans ergaben das histologische Ergebnis eines invasiven, schwach verhornenden Plattenepithelkarzinoms mittleren Differenzierungsgrades (G2-G3. In einer Unterbauch-Computertomographie wurde rechts inguinal ein ausgedehnter, ca. 10 cm messender, teils solider, teils nekrotischer Prozeß, bis an die großen Gefäße heranreichend, beschrieben. Die linke Leiste war unauffällig.

  7. Current activities at the MIT Research Reactor

    International Nuclear Information System (INIS)

    Hu Linwen; Bernard, John A.; Harling, Otto K.; Kohse, Gordon E.; Ames, Michael; Olmez, Ilhan

    1998-01-01

    The MIT Research Reactor (MITR) is a MW nuclear research reactor that is owned and operated by the Massachusetts Institute of Technology to further its educational and research goals at both the undergraduate and graduate level. The reactor first achieved criticality in 1958. It was largely rebuilt in 1973/1974 by MIT staff and students, and its current license expires in August 1999. The current facility, which is designated as the MITR-H, uses a compact core with finned, aluminum-clad, plate-type fuel that is cooled and moderated by light water and reflected by heavy water. The reactor core can hold twenty-seven fuel elements. However, the normal configuration is twenty-four elements. A maximum of four fuel elements can be replaced with in-core experimental facilities. A unique feature of the MITR-II's design is that fixed absorber plates can be inserted in the upper half of the core. These cause the flux to peak in the lower half which benefits experimenters and also facilitates a fuel strategy that involves inversion of fuel elements midway through their life cycle. The MITR-II currently operates continuously for four weeks followed by shutdown of a few days for maintenance. This paper provides an overview of current activities at the MITR including preparations for re-licensing. The status of an on-going Phase-I clinical trial of boron neutron capture therapy for both glioblastoma multiforme and metastatic melanoma is described as well as the design of a fission converter facility for BNCT. Environmental research using neutron activation analysis is summarized as well as in-pile research focussed on LWR water chemistry and structural materials. (author)

  8. Teaching ``The Physics of Energy'' at MIT

    Science.gov (United States)

    Jaffe, Robert

    2009-05-01

    New physics courses on energy are popping up at colleges and universities across the country. Many require little or no previous physics background, aiming to introduce a broad audience to this complex and critical problem, often augmenting the scientific message with economic and policy discussions. Others are advanced courses, focussing on highly specialized subjects like solar voltaics, nuclear physics, or thermal fluids, for example. About two years ago Washington Taylor and I undertook to develop a course on the ``Physics of Energy'' open to all MIT students who had taken MIT's common core of university level calculus, physics, and chemistry. By avoiding higher level prerequisites, we aimed to attract and make the subject relevant to students in the life sciences, economics, etc. --- as well as physical scientists and engineers --- who want to approach energy issues in a sophisticated and analytical fashion, exploiting their background in calculus, mechanics, and E & M, but without having to take advanced courses in thermodynamics, quantum mechanics, or nuclear physics beforehand. Our object was to interweave teaching the fundamental physics principles at the foundations of energy science with the applications of those principles to energy systems. We envisioned a course that would present the basics of statistical, quantum, and fluid mechanics at a fairly sophisticated level and apply those concepts to the study of energy sources, conversion, transport, losses, storage, conservation, and end use. In the end we developed almost all of the material for the course from scratch. The course debuted this past fall. I will describe what we learned and what general lessons our experience might have for others who contemplate teaching energy physics broadly to a technically sophisticated audience.

  9. Biomass torrefaction mill

    Science.gov (United States)

    Sprouse, Kenneth M.

    2016-05-17

    A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

  10. Preparation and co-combustion of whole plants in a coal dust furnace; Aufbereitung und Mitverbrennung von Ganzpflanzen mit Steinkohle in einer Staubfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Siegle, V.; Spliethoff, H.; Hein, K.R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen (IVD)

    1996-12-31

    Co-combustion is a favourable and simple way of utilizing biomass. Owing to the high energy density of grains, whole plants must be ground very thoroughly for use in a coal dust furnace. This can be done with low energy consumption in a hammer mill. In addition, multifuel swirl burners permit selective supply of fuel and low-NO{sub x} combustion. The fuel with the highest nitrogen content should be blown into the inner recirculation zone. (orig) [Deutsch] Die Mitverbrennung von Biomasse ist eine guenstige und schnell zu realisierende Moeglichkeit, Biomasse in grossem Umfang zu nutzen. Um Ganzpflanzen in einer Staubfeuerung mitverbrennen zu koennen, muessen diese aufgrund der hohen Energiedichte der Koerner sehr fein aufgemahlen werden. Dies ist mit einer Hammermuehle mit geringem Energieeinsatz moeglich. Durch eine geeignete Sichtung muss diese jedoch noch weiter optimiert werden. Mit Multi-Fuel-Drallbrennern ist eine stickoxidarme Verbrennung moeglich. Der Brennstoff, der den groesseren Stickstoffeintrag in die Flamme bewirkt, soltle in die innere Rezirkulationszone eingeblasen werden. (orig)

  11. Preparation and co-combustion of whole plants in a coal dust furnace; Aufbereitung und Mitverbrennung von Ganzpflanzen mit Steinkohle in einer Staubfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Siegle, V; Spliethoff, H; Hein, K R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen (IVD)

    1997-12-31

    Co-combustion is a favourable and simple way of utilizing biomass. Owing to the high energy density of grains, whole plants must be ground very thoroughly for use in a coal dust furnace. This can be done with low energy consumption in a hammer mill. In addition, multifuel swirl burners permit selective supply of fuel and low-NO{sub x} combustion. The fuel with the highest nitrogen content should be blown into the inner recirculation zone. (orig) [Deutsch] Die Mitverbrennung von Biomasse ist eine guenstige und schnell zu realisierende Moeglichkeit, Biomasse in grossem Umfang zu nutzen. Um Ganzpflanzen in einer Staubfeuerung mitverbrennen zu koennen, muessen diese aufgrund der hohen Energiedichte der Koerner sehr fein aufgemahlen werden. Dies ist mit einer Hammermuehle mit geringem Energieeinsatz moeglich. Durch eine geeignete Sichtung muss diese jedoch noch weiter optimiert werden. Mit Multi-Fuel-Drallbrennern ist eine stickoxidarme Verbrennung moeglich. Der Brennstoff, der den groesseren Stickstoffeintrag in die Flamme bewirkt, soltle in die innere Rezirkulationszone eingeblasen werden. (orig)

  12. Final Technical Report for the MIT Annular Fuel Research Project

    International Nuclear Information System (INIS)

    Mujid S. Kazimi; Pavel Hejzlar

    2008-01-01

    MIT-NFC-PR-082 (January 2006) Abstract This summary provides an overview of the results of the U.S. DOE funded NERI (Nuclear Research Energy Initiative) program on development of the internally and externally cooled annular fuel for high power density PWRs. This new fuel was proposed by MIT to allow a substantial increase in power density (on the order of 30% or higher) while maintaining or improving safety margins. A comprehensive study was performed by a team consisting of MIT (lead organization), Westinghouse Electric Corporation, Gamma Engineering Corporation, Framatome ANP(formerly Duke Engineering) and Atomic Energy of Canada Limited

  13. Gasification of biomass - principles and technical alternatives; Vergasung von Biomassen - Prinzipien und technische Moeglichkeiten

    Energy Technology Data Exchange (ETDEWEB)

    Klose, E. [Technische Univ. Bergakademie, Freiberg (Germany)

    1996-12-31

    The technical principles of gasification are outlined, and a number of biomass gasification processes are presented and compared with the coal gasification process. On the basis of the knowledge gained in coal gasification, it will be easy to carry out the development work still required on small-scale biomass gasification systems in cooperation with the gas users. (orig) [Deutsch] Das technische Prinzip derVergasung und verschiedene Verfahrensweisen bei der Vergasung von Biomasse werden vorgestellt und mit der Kohlevergasung verglichen. Auf der Grundlage der technischen Erkenntnisse bei der Kohlevergasung einschliesslich der vor- und nachgeschalteten Prozessstufen sind die noch notwendigen verfahrens- und apparatetechnischen Entwicklungsarbeiten fuer vorwiegend kleine Anlagen in Zusammenarbeit mit den Gasnutzern durchfuehrbar. (orig)

  14. Gasification of biomass - principles and technical alternatives; Vergasung von Biomassen - Prinzipien und technische Moeglichkeiten

    Energy Technology Data Exchange (ETDEWEB)

    Klose, E [Technische Univ. Bergakademie, Freiberg (Germany)

    1997-12-31

    The technical principles of gasification are outlined, and a number of biomass gasification processes are presented and compared with the coal gasification process. On the basis of the knowledge gained in coal gasification, it will be easy to carry out the development work still required on small-scale biomass gasification systems in cooperation with the gas users. (orig) [Deutsch] Das technische Prinzip derVergasung und verschiedene Verfahrensweisen bei der Vergasung von Biomasse werden vorgestellt und mit der Kohlevergasung verglichen. Auf der Grundlage der technischen Erkenntnisse bei der Kohlevergasung einschliesslich der vor- und nachgeschalteten Prozessstufen sind die noch notwendigen verfahrens- und apparatetechnischen Entwicklungsarbeiten fuer vorwiegend kleine Anlagen in Zusammenarbeit mit den Gasnutzern durchfuehrbar. (orig)

  15. MIT gets good marks for fighting gender discrimination

    Science.gov (United States)

    Gwynne, Peter

    2011-05-01

    The Massachusetts Institute of Technology (MIT) has made "significant progress" in increasing the number of female faculty members, with their numbers in science and engineering almost doubling over the last decade.

  16. Behandlung des chronischen Tinnitus mit repetitiver transkranieller Magnetstimulation

    OpenAIRE

    Kleinjung, T

    2012-01-01

    Tinnitus ist eine Funktionsstörung des Hörsystems, die von verschiedenen Strukturen und Ebenen ausgehen kann. Tinnitus geht mit neuroplastischen Veränderungen im zentralen auditorischen System einher. Existenz eines „Tinnitus-Netzwerkes“.

  17. Laser mit instabilem Resonator fuer ringfoermige aktive Medien

    OpenAIRE

    Jarosch, U.K.; Habich, U.; Plum, H.D.

    1996-01-01

    Beschrieben werden Laser mit instabilen Resonatoren, die ringfoermige Medien effektiv ausnutzen, unabhaengig davon, ob es sich um feste, fluessige oder gasfoermige Medien handelt. Die Erfindung zeichnet sich dadurch aus, dass die Auskopplung des Strahles (5.1) eines Ringresonators entlang eines Spaltes oder eines Kreisringes ueber dem gesamten Umfang vorgesehen ist, wobei der Laserresonator durch Ringspiegel (1,2) mit torusfoermiger Spiegelflaeche gebildet und von den Waenden des Ringspaltes ...

  18. MIT CSAIL and Lincoln Laboratory Task Force Report

    Science.gov (United States)

    2016-08-01

    funded through MIT LL, most notably through by the MIT LL Technology Office (TO). TO funding has come through a diverse set of venues: ASD (R&E) Line...many and varied opportunities to participate could better cohere research interests at each institution and between them as well. 3.4.2 Autonomy-at...applications. Near-data processing is about migrating selected processing operations from the central processing unit (CPU) of traditional computer

  19. Molekulargenetische Charakterisierung einer Familie mit Usher-Syndrom

    OpenAIRE

    Zimmer, AJ; Arndt, S; Aschendorff, A; Birkenhäger, R

    2009-01-01

    Einleitung: Das Usher-Syndrom definiert eine genetisch und klinisch heterogene autosomal rezessiv vererbte Erkrankung mit dem gleichzeitigen Auftreten von Innenohrschwerhörigkeit bis hin zur Taubheit, teilweise Vestibularisausfall und Netzhautdegeneration (Retinitis Pigmentosa). Bisher wird das Usher-Syndrom in drei verschiedene Hauptgruppen (USH1-3) mit unterschiedlicher phänotypischer Ausprägung eingeteilt. Für das Usher-Syndrom sind 12 Genorte bekannt, für die bereits acht Gene identifizi...

  20. A geometrodynamical approach to the MIT confinement scheme

    International Nuclear Information System (INIS)

    Martellini, M.; Sodano, P.

    1978-01-01

    Starting from the strong gravity theory of Salam-Isham-Strathdee the M.I.T. bag is identified as a certain region of the global extension of a De Sitter-Schwarzschild solution. As a result the M.I.T. bag radius, a geometrical interpretation of the binding Lagrangian term and a rate of decaying of the ''bag manifold'' into the flat space (which, however, does not lead to observable quark wave functions) are obtained. (author)

  1. Abstract behaviour modelling and prognosis on the basis of spatially distributed sensor networks with Kohonen cards and Markov chains; Abstrakte Verhaltensmodellierung und -prognose auf der Basis raeumlich verteilter Sensornetze mit Kohonen-Karten und Markov-Ketten

    Energy Technology Data Exchange (ETDEWEB)

    Matthes, J.; Keller, H.B.; Mikut, R. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Angewandte Informatik

    2000-10-01

    Evironmental processes, e.g. local air quality changes in urban agglomerations, buildings and production halls are dynamic processes with regionally distributed physical variables. They can be monitored by networks of distributed measuring probes. Processes of this type form the basis of complex systems with many degrees of freedom and stochastic effects that are difficult to measure. The contribution presents an introduction to Markov chains, proposes a method of generating Markov chains as a prognostic model, and demonstrates the method using the example of an air quality monitoring process. [German] Fuer die Ueberwachung dynamischer Prozesse, deren physikalische Groessen raeumlich verteilt auftreten, werden oft Netze raeumlich verteilter Sensoren eingesetzt. Umweltprozesse, wie z.B. die oertliche Luftqualitaetsaenderung in Ballungsraeumen, Gebaeuden und Produktionsanlagen, aber auch verschiedene verfahrenstechnische Prozesse sind Vertreter dieser Prozessklasse. Solchen Prozessen hinterliegen komplexe Systeme, die durch eine hohe Anzahl an Freiheitsgraden und durch stochastische schwer messbare Einfluesse gekennzeichnet sind. Ziel dieses Vortrages ist es, - eine kurze Einfuehrung zu Markov-Ketten zu gegeben (Abschnitt 2); - ein datengestuetztes Verfahren vorzuschlagen, das nach einer Schaetzung abstrakter Prozesszustaende mit Hilfe von Kohonen-Karten Markov-Ketten als Prognosemodell generiert (Abschnitt 3), und - dieses Verfahren anhand eines Simulationsbeispiels zur Luftqualitaetsueberwachung zu demonstrieren (Abschnitt 4). (orig.)

  2. Biomass treatment method

    Science.gov (United States)

    Friend, Julie; Elander, Richard T.; Tucker, III; Melvin P.; Lyons, Robert C.

    2010-10-26

    A method for treating biomass was developed that uses an apparatus which moves a biomass and dilute aqueous ammonia mixture through reaction chambers without compaction. The apparatus moves the biomass using a non-compressing piston. The resulting treated biomass is saccharified to produce fermentable sugars.

  3. Rheology of concentrated biomass

    Science.gov (United States)

    J.R. Samaniuk; J. Wang; T.W. Root; C.T. Scott; D.J. Klingenberg

    2011-01-01

    Economic processing of lignocellulosic biomass requires handling the biomass at high solids concentration. This creates challenges because concentrated biomass behaves as a Bingham-like material with large yield stresses. Here we employ torque rheometry to measure the rheological properties of concentrated lignocellulosic biomass (corn stover). Yield stresses obtained...

  4. Major Biomass Conference

    Science.gov (United States)

    Top Scientists, Industry and Government Leaders to Gather for Major Biomass Conference America, South America and Europe will focus on building a sustainable, profitable biomass business at the Third Biomass Conference of the Americas in Montreal. Scheduled presentations will cover all biomass

  5. Biomass Feedstocks | Bioenergy | NREL

    Science.gov (United States)

    Feedstocks Biomass Feedstocks Our mission is to enable the coordinated development of biomass generic biomass thermochemical conversion process (over a screened-back map of the United States) showing U.S. Biomass Resources, represented by photos of timber, corn stover, switchgrass, and poplar. All

  6. Methods for pretreating biomass

    Science.gov (United States)

    Balan, Venkatesh; Dale, Bruce E; Chundawat, Shishir; Sousa, Leonardo

    2017-05-09

    A method for pretreating biomass is provided, which includes, in a reactor, allowing gaseous ammonia to condense on the biomass and react with water present in the biomass to produce pretreated biomass, wherein reactivity of polysaccharides in the biomass is increased during subsequent biological conversion as compared to the reactivity of polysaccharides in biomass which has not been pretreated. A method for pretreating biomass with a liquid ammonia and recovering the liquid ammonia is also provided. Related systems which include a biochemical or biofuel production facility are also disclosed.

  7. Rigiscan®-Monitoring der Erektion unter audiovisueller sexueller Stimulation ohne/mit Viagra™ bei Patienten mit erektiler Dysfunktion

    Directory of Open Access Journals (Sweden)

    Perabo FGE

    2000-01-01

    Full Text Available Die orale Medikation mit Sildenafil (Viagra™ hat sich zur Therapie der erektilen Dysfunktion etabliert und relativiert die Differentialdiagnose zwischen psychogener und organischer Dysfunktion mit den entsprechenden therapeutischen Konsequenzen. Diesem Problem widmet sich diese Studie zur Prüfung der erektilen Antwort unter RigiScan®-Monitoring ohne/mit 50 mg Viagra™. 64 Patienten (mittleres Alter 48 Jahre mit einer erektilen Dysfunktion arteriogener (n = 10, venöser (n = 7, gemischt neurogen/vaskulärer (n = 15 und psychogener (n = 32 Genese von mehr als 6 Monaten Dauer wurden in die Studie aufgenommen. Alle Patienten wurden eingehend diagnostisch abgeklärt, inklusive Hormonlabor, dynamischer Pharmako-Duplexsonographie und, falls indiziert, mit einer Cavernosometrie/ -graphie. Zur Testung der penilen Rigidität und zur Objektivierung der Erektion wurde das "real-time" RigiScan® verwendet. In zwei konsekutiven Messungen wurden sowohl die direkte erektile Antwort auf visuelle Stimulation als auch die nächtlichen Erektionen abgeleitet und die Meßergebnisse mit den Begleiterkrankungen, "lifestyle"-Faktoren und dem Ergebnis der Pharmako-Duplexsonographie korreliert. Es fand sich keine Korrelation zwischen der Ätiologie der erektilen Dysfunktion in bezug auf organische oder psychogene Genese und dem Alter der Patienten, der Dauer der Erektionsstörung, dem Nikotinabusus, den Blutfetten, den Testosteronwerten, dem klinischen Ergebnis der Pharmakotestung (Erektionsgrad und dem duplexsonographisch gemessenen Fluß der penilen Arterien. Hingegen zeigte sich eine positive Korrelation zwischen Genese der erektilen Dysfunktion (organisch bzw. psychogen und dem RigiScan®-Meßergebnis (r = 0,29. Patienten mit psychogen bedingter Erektionsstörung profitierten am meisten von Viagra™, während Patienten mit vaskulärer Genese oder gemischt neurogener/vaskulärer Genese deutlich schlechter auf Viagra™ ansprachen. Es bestand keine Korrelation

  8. Prospect of mechanical engineering. Report from MIT; Kikai kogaku no atarashii tenkai. MIT kara no hokoku

    Energy Technology Data Exchange (ETDEWEB)

    Asada, H [Massachusetts Inst. of Technology, Cambridge, MA (United States)

    1996-01-05

    The author of this article is a professor of Department of Mechanical Engineering of Massachusetts Institute of Technology (MIT) and the director general of Laboratory for Information Systems and Technology of the institute. At Department of Mechanical Engineering of Engineering Faculty of world-famous MIT, Laboratory for Information Systems and Technology was established in 1994 and in the same year, the curricula of the department were greatly revised after 30 years for its enforcement from the new semester starting from September, 1995. These two occasions are suggestive for guessing the future of mechanical engineering, hence its aim and meaning are introduced. Department of Mechanical Engineering aims to bring up system integrators who can consolidate systems based on wide-ranged knowledge, and its basic subjects are divided into 4 subjects namely dynamics and control, heat and fluid, system engineering and control, and design and production, and it has been decided that each of them is taught in equal weight and in parallel. Also as a new study field in the above Department of Mechanical Engineering, nanotechnology and artificial intelligence, and high-technological aircraft and networks are shown as examples.

  9. Solar-assisted biomass-district heating: projects in Austria and operational data; Solarunterstuetzte Biomasse-Fernwaermeversorgung: Projekte in Oesterreich und Betriebsdaten

    Energy Technology Data Exchange (ETDEWEB)

    Faninger, G. [Institut fuer Interdisziplinaere Forschung und Fortbildung der Universitaeten Klagenfurt, Innsbruck und Wien (IFF), Klagenfurt (Austria)

    1998-12-31

    In recent years small-volume biomass district heating systems (district heat grids) have attracted increasing interest in Austria. By the end of 1997 some 359 biomass-district heating systems with an overall capacity of approximately 483 MW were in operation. If a biomass-district heating plant and a solar plant are combined the solar plant can supply most of the heat required outside the heating season. At present Austria runs 12 solar-assisted biomass-district heating grids with collector areas between 225 square metres and 1,250 square metres. In order to run these biomass-district heating systems in an economically and technically efficient way it is necessary to assure high quality in terms of planning, construction and operation. A list of criteria is set up on the basis of first operational data in order to evaluate energy efficiency and economic performance. These criteria should be applied in order to ensure that energy, environment and economy are equally considered in the planning and construction of solar-assisted biomass-district heating plants. They should also be helpful for the approval procedures of projects. (orig.) [Deutsch] Kleinraeumige Biomasse-Fernwaermeanlagen (Nahwaermenetze) fanden in den letzten Jahren zunehmendes Interesse in Oesterreich. So waren Ende 1997 insgesamt 359 Biomasse-Fernwaermeanlagen mit einer installierten Gesamtleistung von etwa 483 MW in Betrieb. Die Kombination einer Biomasse-Fernwaermeanlage mit einer Solaranlage bringt den Vorteil, dass die Waermebereitstellung ausserhalb der Heizsaison zu einem hohen Anteil ueber die Solaranlage vorgenommen werden kann. Derzeit werden in Oesterreich 12 solarunterstuetzte Biomasse-Nahwaermenetze mit Kollektorflaechen von 225 m{sup 2} bis 1.250 m{sup 2} betrieben. Um einen moeglichst effizienten und damit auch wirtschaftlichen Betrieb von solarunterstuetzten Biomasse-Fernwaermeanlagen zu gewaehrleisten, werden hohe Anforderungen an Planung, Ausfuehrung und Betrieb gestellt. Auf der

  10. Analysis of cryopreparated non-dehydrated sample systems by means of a newly developed Tof-SIMS instrument with integrated high-vacuum cutting apparature; Analysen kryopraeparierter nicht-dehydrierter Probensysteme mit Hilfe eines neu entwickelten ToF-SIMS-Instruments mit integrierter Hochvakuumkryoschnittapparatur

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, Joerg

    2008-12-05

    Aim of the present thesis was to construct an analysis apparatus, which allows to perform on cryofixed samples a cryocutting respectively cryocracking preparation under vacuum conditions and in the following perform a Tof-SIMS analysis.

  11. Determination of the cerebral dopamine-D2-receptor density by [sup 123]I-IBZM-SPECT in patients with Parkinson's disease. Bestimmung der zerebralen Dopamin-(D2)-Rezeptoren-Dichte mit Hilfe der [sup 123]Jod-IBZM-SPECT bei Patienten mit Morbus Parkinson

    Energy Technology Data Exchange (ETDEWEB)

    Hierholzer, J; Cordes, M; Barzen, G; Keske, U; Felix, R [Strahlenklinik und Poliklinik, Klinikum Rudolf Virchow, Berlin (Germany); Schelosky, L; Poewe, H [Neurologische Klinik und Poliklinik, Klinikum Rudolf Virchow, Berlin (Germany); Henkes, H [Inst. fuer Neuroradiologie, Univ. des Saarlandes, Homburg/Saar (Germany); Horowski, R [Schering AG, Berlin (Germany)

    1992-10-01

    An alteration of the dopaminergic nigrostriatal system is believed to be the main pathogenetic factor of Parkinson's disease (PD). We report on our initial results on the determination of the post-synapticdopamine-D2-receptor binding of [sup 123]I-IBZM in patients with PD. Drug-native patients showed a significantly higher IBZM binding in the basal ganglia as compared to patients on specific dopaminergic medication. We conclude that [sup 123]I-IBZM-SPECT is an extremely usuful tool for the evaluation of the functional state of cerebraldopamine-D2-receptors. (orig./DG).

  12. [Postoperative adjuvante Therapie mit einem Mistelextrakt (Viscum album ssp. album) bei Hündinnen mit Mammatumoren].

    Science.gov (United States)

    Biegel, Ulrike; Stratmann, Nina; Knauf, Yvonne; Ruess, Katja; Reif, Marcus; Wehrend, Axel

    2017-01-01

    Hintergrund: Canine Mammatumoren (CMT) sind wegen ihrer Häufigkeit und hohen Malignitätsrate eine Herausforderung für die Veterinärmedizin. Bisher ist noch keine postoperative adjuvante Therapie als wirksamer Standard etabliert und in den nächsten Jahren wohl auch nicht zu erwarten. Zusätzlich ist die Frage nach der Verträglichkeit einer adjuvanten Therapie mit Erhaltung oder Verbesserung der Lebensqualität (LQ) wichtig. Die Therapie mit Mistelextrakten (Viscum album L.; VAE) ist in der Humanonkologie nach adjuvanter Tumorbasistherapie (Chemotherapie und Bestrahlung) eine sehr häufig verwendete, zusätzliche adjuvante Behandlungsmethode. Auch bei verschiedenen Tierarten werden inzwischen Mistelpräparate in der Onkologie erfolgreich angewendet. Methoden: Überprüfung von Wirkung und Nutzen einer postoperativen, adjuvanten Misteltherapie beim CMT sowie Erfassung der LQ unter der VAE-Behandlung. Ausgewertet wurden 56 Hündinnen mit Mammaadenokarzinom, 33 ausschließlich operierte Kontrolltiere und 23 operierte Tiere, die adjuvant VAE erhielten. Ergebnisse: Die mediane Überlebenszeit (MST) aller Tiere (n = 56) betrug 32 Monate (Interquartilbereich 13-51 Monate). Im deskriptiven Vergleich der Überlebenszeiten (ST) nach Kaplan-Meier waren nach 12, 24, 36 bzw. 48 Monaten noch 24, 20, 15 bzw. 5 Hündinnen (entsprechend 72,7%, 60,6%, 45,1%, 12,4%) der Kontrollgruppe sowie 19, 14, 11 und 1 Hündin (82,6%, 60,9%, 47,8%, 4,3%) der VAE-Gruppe am Leben. Die VAE-Therapie führte zu einem geringeren Gesamtversterberisiko, das statistisch nicht signifikant war (Hazard Ratio (HR) 0,530, 95%-Konfidenzintervall (KI) 0,222-1,262; p = 0,15). Tendenziell (p = 0,07) zeigte sich eine Verringerung des tumorbedingten Sterberisikos auf 25% (HR 0,251, 95%-KI 0,056-1,122). Schlussfolgerungen: Es kann eine Tendenz zur Senkung des tumorbedingten Sterberisikos der VAE-Gruppe bei guter Verträglichkeit der Therapie angenommen werden. Die LQ der Tiere blieb über die gesamte

  13. The micro turbine: the MIT example; La micro turbine: l'exemple du MIT

    Energy Technology Data Exchange (ETDEWEB)

    Ribaud, Y. [Office National d' Etudes et de Recherches Aerospatiales (ONERA-DEFA), 92 - Chatillon (France)

    2001-10-01

    The micro turbine study began a few years ago at the MIT, with the participation of specialists from different fields. The purpose is the development of a MEMS (micro electro mechanical systems) based, 1 cm in diameter, micro gas turbine. Potential applications are devoted to micro drone propulsion, electric power generation for portable power sources in order to replace heavy Lithium batteries, satellite motorization, the surface distributed power for boundary suction on plane wings. The manufacturing constraints at such small scales lead to 2-D extruded shapes. The physical constraints stem from viscous effects and from limitations given by 2-D geometry. The time scales are generally shorter than for conventional machines. Otherwise the material properties are better at such length scales. Transposition from conventional turbomachinery laws is no more applicable and new design methods must be established. The present paper highlights the project progress and the technology breakthroughs. (author)

  14. Islam, Migration und Integration: Konflikte jugendlicher Migranten mit islamischem Hintergrund

    Directory of Open Access Journals (Sweden)

    Ilhan Kizilhan

    2008-04-01

    Full Text Available Der Islam mit seinen verschiedenen Verhaltensweisen und Verboten spielt direkt oder indirekt immer noch eine wichtige Rolle im alltäglichen Leben vieler Migranten. Religiöse Vorschriften zeichnen sich dadurch aus, dass ihrer Achtung nicht juristisch, sondern durch sozialen Druck Nachdruck verliehen wird (Verwandtschaft, religiöse Lehrer, islamische Gemeinde, religiöse Vereine etc. und dass ihre Missachtung mit Folgen in Form von Ausgrenzung, Missachtung und Diskriminierung einhergeht. Die kulturellen Vorstellungen der ersten Generation unterscheiden sich auf Grund der unterschiedlichen Biografien von denen der zweiten und dritten durch den Grad der Verwurzelung in der kulturellen Identität und der Verbundenheit mit traditionellen Wertvorstellungen. Fehlende Integrationskonzepte, Ausgrenzung im Migrationsland auf der einen und weltweite staatliche und halbstaatliche Konflikte im Namen des Islams bis hin zum Terrorismus auf der anderen Seite haben einen erheblichen Einfluss auf den Integrationsgrad von jugendlichen Migranten im Aufnahmeland.

  15. Professionell entwickeln mit Java EE 7 das umfassende Handbuch

    CERN Document Server

    Salvanos, Alexander

    2014-01-01

    Ein praxisorientiertes Lehrbuch zur JEE 7 und zugleich ein Standardwerk, das Sie auf Ihrem Weg zum Enterprise-Entwickler begleitet. Inklusive Best Practices für leichtgewichtige Enterprise Applications, Standards zu servicebasierten Anwendungen, Persistence API, Dependency Injection, HTML5 und Performance-Tuning. Aus dem Inhalt: Grundlagen und Installation Software-Architektur mit Java EE Webanwendungen mit HTML5 und CSS3 Java Standard Tag Library Asynchrone Servlets und Non-blocking I/O Datenbanken anbinden mit der JDBC API Java Server Faces Datenbank-Organisation Java Persistence API Objektrelationales Mapping Transaktionssicherheit Performance-Tuning Internationalisierung Enterprise Java Beans WebSockets PrimeFaces Deployment Galileo Press heißt von jetzt an Rheinwerk Verlag.

  16. Pretreated densified biomass products

    Science.gov (United States)

    Dale, Bruce E; Ritchie, Bryan; Marshall, Derek

    2014-03-18

    A product comprising at least one densified biomass particulate of a given mass having no added binder and comprised of a plurality of lignin-coated plant biomass fibers is provided, wherein the at least one densified biomass particulate has an intrinsic density substantially equivalent to a binder-containing densified biomass particulate of the same given mass and h a substantially smooth, non-flakey outer surface. Methods for using and making the product are also described.

  17. Fallstudie SIG - Supply Chain Prototyp mit Coca Cola Beverages

    OpenAIRE

    Senger, Enrico

    2003-01-01

    SIG, ein führender Lieferant von Verpackungsmaterialien für Getränke, hat mit Coca Cola CPFR, collaborative planning, forecasting and replenishment realisiert. Das Unternehmen kann elektronisch und ohne Zeitverzug (vorher mit bis zu 15 Tagen Verspätung) auf die Lagerbestände und Verkaufsvorhersagen bei Coca Cola zugreifen. Coca Cola erhält die exakten Liefermengen und zeiten. Coca Cola konnte dadurch den Lagerbestand von Verpackungsmaterial um 50% senken. Dies reduziert die Bearbeitungszeit d...

  18. Untersuchungen zur Farbreaktion von Amilorid, Chlorhexidin und Proguanil mit Hypobromit

    OpenAIRE

    Huth, Silke

    2004-01-01

    Bei der Reaktion von Amiloridhydrochlorid (1· HCl) mit Brom in alkalischer Lösung wird ein gelbbraunes Dehydrierungsprodukt erhalten, daß als 3-(3-Amino-1,2,4-oxadiazol-5-yl)-5-chlor-2,6-pyrazindiamin (6) identifiziert werden konnte. Durch Vergleich von Massen- und NMR-Spektren der Verbindung 6 mit Spektren von 1· HCl und Referenzsubstanzen I-III konnte auf die verbindung 6 geschlossen werden. Die Struktur wurde durch eine Röntgenstrukturanalyse abgesichert. Erhitzen von Amiloridhydrochlorid ...

  19. Electrochemical characterization of electrolytes and electrodes for lithium-ion batteries. Development of a new measuring method for electrochemical investigations on electrodes with the electrochemical quartz crystal microbalance (EQCM); Elektrochemische Charakterisierung von Elektrolyten und Elektroden fuer Lithium-Ionen-Batterien. Entwicklung einer neuen Messmethode fuer elektrochemische Untersuchungen an Elektroden mit der EQCM

    Energy Technology Data Exchange (ETDEWEB)

    Moosbauer, Dominik Johann

    2010-11-09

    neue Methoden entwickelt, um mit der elektrochemischen Quarzmikrowaage (EQCM) Untersuchungen an Elektrodenkomponenten durchfuehren zu koennen. Zunaechst wurden Korrosions- bzw. Passivierungsmessungen an Aluminium durchgefuehrt und die Massen der beteiligten Komponenten mit Hilfe der EQCM abgeschaetzt. Danach wurde auch Aktivmaterialien von Kathoden, in dieser Arbeit Lithiumeisenphosphat (LiFePO4), mit der EQCM untersucht.

  20. Biomass CCS study

    Energy Technology Data Exchange (ETDEWEB)

    Cavezzali, S.

    2009-11-15

    The use of biomass in power generation is one of the important ways in reducing greenhouse gas emissions. Specifically, the cofiring of biomass with coal could be regarded as a common feature to any new build power plant if a sustainable supply of biomass fuel is readily accessible. IEA GHG has undertaken a techno-economic evaluation of the use of biomass in biomass fired and co-fired power generation, using post-combustion capture technology. This report is the result of the study undertaken by Foster Wheeler Italiana.

  1. Parallelization experience with four canonical econometric models using ParMitISEM

    NARCIS (Netherlands)

    Baştürk, N.; Grassi, S.; Hoogerheide, L.; van Dijk, H.K.

    2016-01-01

    This paper presents the parallel computing implementation of the MitISEM algorithm, labeled Parallel MitISEM. The basic MitISEM algorithm, introduced by Hoogerheide et al. (2012), provides an automatic and flexible method to approximate a non-elliptical target density using adaptive mixtures of

  2. Parallelization Experience with Four Canonical Econometric Models Using ParMitISEM

    NARCIS (Netherlands)

    N. Basturk (Nalan); S. Grassi (Stefano); L.F. Hoogerheide (Lennart); H.K. van Dijk (Herman)

    2016-01-01

    textabstractThis paper presents the parallel computing implementation of the MitISEM algorithm, labeled Parallel MitISEM. The basic MitISEM algorithm, introduced by Hoogerheide, Opschoor and Van Dijk (2012), provides an automatic and flexible method to approximate a non-elliptical target density

  3. Parallelization experience with four canonical econometric models using ParMitISEM

    NARCIS (Netherlands)

    Bastürk, Nalan; Grassi, S.; Hoogerheide, L.; van Dijk, Herman K.

    2016-01-01

    This paper presents the parallel computing implementation of the MitISEM algorithm, labeled Parallel MitISEM. The basic MitISEM algorithm provides an automatic and flexible method to approximate a non-elliptical target density using adaptive mixtures of Student-t densities, where only a kernel of

  4. MIT wavelength tables. Volume 2. Wavelengths by element

    International Nuclear Information System (INIS)

    Phelps, F.M. III.

    1982-01-01

    This volume is the first stage of a project to expand and update the MIT wavelength tables first compiled in the 1930's. For 109,325 atomic emission lines, arranged by element, it presents wavelength in air, wavelength in vacuum, wave number and intensity. All data are stored on computer-readable magnetic tape

  5. MIT Orients Course Materials Online to K-12

    Science.gov (United States)

    Cavanagh, Sean

    2008-01-01

    Many science and mathematics educators across the country are taking advantage of a Web site created by the Massachusetts Institute of Technology (MIT), the famed research university located in Cambridge, Massachusetts, which offers free video, audio, and print lectures and course material taken straight from the school's classes. Those resources…

  6. MIT Mints a Valuable New Form of Academic Currency

    Science.gov (United States)

    Carey, Kevin

    2012-01-01

    The Massachusetts Institute of Technology (MIT) has invented or improved many world-changing things--radar, information theory, and synthetic self-replicating molecules, to name a few. Last month the university announced, to mild fanfare, an invention that could be similarly transformative, this time for higher education itself. It is called MITx.…

  7. Interaktion mit virtuellen Agenten? Zur Aneignung eines ungewohnten Artefakts

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    sprechen, schließt der soziologische Interaktionsbegriff nichtmenschliche Gesprächspartner aus. Es stellt sich daher die Frage, mit welchen Konzepten die Soziologie dieses neue Phänomen fassen kann. Vor dem Hintergrund der techniksoziologischen Debatte um die Handlungsträgerschaft von Artefakten werden die...

  8. Collimator optimization studies for the new MIT epithermal neutron beam

    International Nuclear Information System (INIS)

    Riley, K.J.; Ali, S.J.; Harling, O.K.

    2000-01-01

    A patient collimator has been designed for the epithermal neutron facility now being commissioned at MIT. Collimator performance both in and out of field was evaluated using the Monte Carlo code MCNP. A two piece design that can accommodate different circular field sizes will be manufactured using a composite lead, epoxy, boron and lithium mixture. (author)

  9. Interaktion mit RFID Ausleih- und Rückgabeautomaten

    DEFF Research Database (Denmark)

    Greifeneder, Elke; Heyroth, Melanie; Klingbeil, Karin

    2011-01-01

    Der Artikel untersucht mittels Beobachtung die Interaktion zwischen RFID-Ausleih- und Rückgabeautomaten sowie Bibliotheksbenutzern in vier deutschen Bibliotheken. Die Ergebnisse belegen, dass die Interaktion grundsätzlich funktioniert. Die Benutzer zeigten Gelassenheit und Routine im Umgang mit den...

  10. Chronisch-dekompensierter Tinnitus: ein heterogenes Krankheitsbild mit Auswirkungen auf den Behandlungserfolg

    OpenAIRE

    Ivansic, D; Müller, B; Dobel, C; Guntinas-Lichius, O

    2017-01-01

    Einleitung: Bei etwa 5% der Patienten mit chronischem Tinnitus gehen die Ohrgeräusche mit erheblichem Leidensdruck, häufig auch mit psychiatrischen Störung einher. Da es aktuell keine wirksame Behandlung gibt, welche zu Beseitigung des chronischen Tinnitus führt, ist das Therapieziel die Reduktion der Tinnitus-Belastung. Methodik: Es wurden von 7/13 bis 12/14 308 Patienten mit chronischen Tinnitus tagesklinisch interdisziplinär behandelt. Die Tinnitus-Belastung wurde mit Tinnitus-Fragebogen...

  11. 2D-FE throughflow method for multistage cooled turbines with subsonic and transonic flow. Final report; 2D-FE-Verfahren fuer die Kennfeldberechnung von vielstufigen Turbinen mit unter- und ueberkritischen Stufendruckverhaeltnissen mit variabler Kuehlluftzufuhr. Abschlussbericht zum Vorhaben 1.312

    Energy Technology Data Exchange (ETDEWEB)

    Riess, W.; Gehring, S.

    2000-07-01

    ] Meridianstroemungsverfahren werden aufgrund ihres geringen Bedarfs an Rechenzeit zur schnellen Simulation des Betriebsverhaltens von Turbomaschinen eingesetzt. Um dieser Aufgabe bei der Auslegung des Turbinenteils einer Gasturbine gerecht zu werden, muessen die Verfahren sowohl alle wesentlichen stroemungsmechanischen Einfluesse als auch die Einfluesse moderner Systeme zur Bauteilkuehlung beruecksichtigen. Die vorliegende Arbeit befasst sich mit der Modellierung von Sekundaerstroemungseinfluessen, radialen Transportprozessen und Kuehlungseinfluessen in einem auf der Methode der Finiten-Elemente basierenden Meridianstroemungsverfahren. Zur Beruecksichtigung der Einfluesse komplexer Kuehlungssysteme koennen beliebige Konfigurationen von konvektiver Kuehlung, Ausblasung an den Schaufelhinterkanten, Filmkuehlung sowie Ausblasung an Nabe und Gehaeuse vorgegeben werden. Der Mischungsprozess zwischen Hauptmassenstrom und Kuehlluft wird mit Hilfe vereinfachter Bilanzgleichungen berechnet. Massenstromaenderungen werden entweder durch Aenderung der Definitionsgleichungen der Stromfunktion oder im Fall von Ausblasungen in den Randzonen durch geaenderte Randbedingungen an den Seitenwaenden beruecksichtigt. Um bei einem vorgegebenen Druckverhaeltnis den Massenstrom berechnen zu koennen, wird eine Druckregelung implementiert. Die Druckregelung passt den Massenstrom waehrend der Berechnung an das geforderte Druckverhaeltnis an. Die Kontinuitaetsgleichung ist zu jedem Zeitpunkt der Berechnung erfuellt, wodurch die Rechnung beschleunigt wird. Zur Ueberpruefung des Verfahrens wird eine 1,5-stufige Versuchsturbine mit lokaler Kuehlgasausblasung vor der Beschaufelung sowie der Turbinenteil der Hochtemperatur-Gasturbine V84.3 der Firma Siemens AG (KWU) nachgerechnet. Die Hochtemperatur-Gasturbine wird durch eine Kombination von Konvektionskuehlung und Hinterkantenausblasung gekuehlt. Die berechneten Stroemungsgroessen zeigen fuer beide Maschinen eine gute Uebereinstimmung mit experimentellen Daten bzw

  12. Modelling of biomass pyrolysis

    International Nuclear Information System (INIS)

    Kazakova, Nadezhda; Petkov, Venko; Mihailov, Emil

    2015-01-01

    Pyrolysis is an essential preliminary step in a gasifier. The first step in modelling the pyrolysis process of biomass is creating a model for the chemical processes taking place. This model should describe the used fuel, the reactions taking place and the products created in the process. The numerous different polymers present in the organic fraction of the fuel are generally divided in three main groups. So, the multistep kinetic model of biomass pyrolysis is based on conventional multistep devolatilization models of the three main biomass components - cellulose, hemicelluloses, and lignin. Numerical simulations have been conducted in order to estimate the influence of the heating rate and the temperature of pyrolysis on the content of the virgin biomass, active biomass, liquid, solid and gaseous phases at any moment. Keywords: kinetic models, pyrolysis, biomass pyrolysis.

  13. Biomass cogeneration: A business assessment

    Science.gov (United States)

    Skelton, J. C.

    1981-11-01

    The biomass cogeneration was reviewed. The business assessment is based in part on discussions with key officials from firms that have adopted biomass cogeneration systems and from organizations such as utilities, state and federal agencies, and banks directly involved in a biomass cogeneration project. The guide is organized into five chapters: biomass cogeneration systems, biomass cogeneration business considerations, biomass cogeneration economics, biomass cogeneration project planning, and case studies.

  14. Advanced Biomass Gasification Projects

    Energy Technology Data Exchange (ETDEWEB)

    1997-08-01

    DOE has a major initiative under way to demonstrate two high-efficiency gasification systems for converting biomass into electricity. As this fact sheet explains, the Biomass Power Program is cost-sharing two scale-up projects with industry in Hawaii and Vermont that, if successful, will provide substantial market pull for U.S. biomass technologies, and provide a significant market edge over competing foreign technologies.

  15. Process for treating biomass

    Science.gov (United States)

    Campbell, Timothy J.; Teymouri, Farzaneh

    2018-04-10

    This invention is directed to a process for treating biomass. The biomass is treated with a biomass swelling agent within the vessel to swell or rupture at least a portion of the biomass. A portion of the swelling agent is removed from a first end of the vessel following the treatment. Then steam is introduced into a second end of the vessel different from the first end to further remove swelling agent from the vessel in such a manner that the swelling agent exits the vessel at a relatively low water content.

  16. Energy production from biomass

    International Nuclear Information System (INIS)

    Bestebroer, S.I.

    1995-01-01

    The aim of the task group 'Energy Production from Biomass', initiated by the Dutch Ministry of Economic Affairs, was to identify bottlenecks in the development of biomass for energy production. The bottlenecks were identified by means of a process analysis of clean biomass fuels to the production of electricity and/or heat. The subjects in the process analysis are the potential availability of biomass, logistics, processing techniques, energy use, environmental effects, economic impact, and stimulation measures. Three categories of biomass are distinguished: organic residual matter, imported biomass, and energy crops, cultivated in the Netherlands. With regard to the processing techniques attention is paid to co-firing of clean biomass in existing electric power plants (co-firing in a coal-fired power plant or co-firing of fuel gas from biomass in a coal-fired or natural gas-fired power plant), and the combustion or gasification of clean biomass in special stand-alone installations. 5 figs., 13 tabs., 28 refs

  17. Biomass resources in California

    Energy Technology Data Exchange (ETDEWEB)

    Tiangco, V.M.; Sethi, P.S. [California Energy Commission, Sacramento, CA (United States)

    1993-12-31

    The biomass resources in California which have potential for energy conversion were assessed and characterized through the project funded by the California Energy Commission and the US Department of Energy`s Western Regional Biomass Energy Program (WRBEP). The results indicate that there is an abundance of biomass resources as yet untouched by the industry due to technical, economic, and environmental problems, and other barriers. These biomass resources include residues from field and seed crops, fruit and nut crops, vegetable crops, and nursery crops; food processing wastes; forest slash; energy crops; lumber mill waste; urban wood waste; urban yard waste; livestock manure; and chaparral. The estimated total potential of these biomass resource is approximately 47 million bone dry tons (BDT), which is equivalent to 780 billion MJ (740 trillion Btu). About 7 million BDT (132 billion MJ or 124 trillion Btu) of biomass residue was used for generating electricity by 66 direct combustion facilities with gross capacity of about 800 MW. This tonnage accounts for only about 15% of the total biomass resource potential identified in this study. The barriers interfering with the biomass utilization both in the on-site harvesting, collection, storage, handling, transportation, and conversion to energy are identified. The question whether these barriers present significant impact to biomass {open_quotes}availability{close_quotes} and {open_quotes}sustainability{close_quotes} remains to be answered.

  18. First clinical experience with extended planning and navigation in an interventional MRI unit; Erste klinische Erfahrungen mit einer erweiterten Eingriffsplanung und Navigation am interventionellen MRT

    Energy Technology Data Exchange (ETDEWEB)

    Moche, M.; Schneider, J.P.; Schulz, T.; Voerkel, C.; Kahn, T.; Busse, H. [Klinik und Poliklinik fuer Diagnostische Radiologie, Universitaetsklinikum Leipzig (Germany); Schmitgen, A.; Bublat, M. [Fraunhofer-Inst. fuer Angewandte Informationstechnik, St. Augustin (Germany); Trantakis, C. [Klinik und Poliklinik fuer Neurochirurgie, Universitaetsklinikum Leipzig (Germany); Bennek, J. [Klinik und Poliklinik fuer Kinderchirurgie, Univ. Leipzig (Germany)

    2004-07-01

    -Datensaetze dienen der Eingriffsplanung. Der Informationsgehalt dieser Referenzdaten wird durch Ueberlagerung zusaetzlicher Bildmodalitaeten (u.a. fMRT, CT) und durch farbige Darstellung der Bereiche frueher und rascher Kontrastmittelaufnahme erhoeht. Mit Hilfe dieses Systems wurden innerhalb von 18 Monaten 123 Patienten operiert (Gehirn: 64, Nasennebenhoehle: 9, Mamma: 20, Leber: 17, Knochen: 9, Muskel: 4). Der durchschnittliche Zeitaufwand der 64 Hirnoperationen wurde mit dem von 36 Eingriffen mit herkoemmlicher Navigation verglichen. Ergebnisse: Im Vergleich zur schnellen, kontinuierlichen Bildgebung des MRT-Systems (0,25 Bilder/s) erlauben erst die hoehere Qualitaet sowie die Echtzeitdarstellung (4 Bilder/s) der aus dem 3-D-Referenzdatensatz rekonstruierten MR-Bilder eine angemessene Auge-Hand-Koordination. Patienten- bzw. Gewebeverlagerungen lassen sich fruehzeitig intraoperativ erkennen und die Navigation kann durch Aktualisierung der Referenzdaten sicher fortgefuehrt werden. Das System zeichnete sich durch eine hohe Stabilitaet, effiziente Systemintegration und einfache Bedienbarkeit aus. Die bildgestuetzten Hirnoperationen dauerten trotz zusaetzlicher, noch zu optimierender Arbeitsschritte nicht signifikant laenger. (orig.)

  19. Stabilisation of a thin crystalline Si wafer solar cell using glass substrate; Duenne kristalline Silizium Wafer-Solarzelle mit Glastraeger stabilisiert

    Energy Technology Data Exchange (ETDEWEB)

    Muehlbauer, Maria

    2009-07-01

    Siliziumwafer (< 100 {mu}m) durch ein Traegermaterial (BOROFLOAT33 von Schott Glas) zu stabilisieren. Es zeigte sich, dass der gesamte Serienwiderstand vor allem durch den spezifischen Widerstand des entstandenen Rueckseitenkontaktes gepraegt wird und besonders die duennen Solarzellen ueber eine hohe Rekombination an der Rueckseite verfuegen. Ausserdem weisen die sehr duennen Si-Wafer schon vor der Verbindung mit dem Glas eine leichte Welligkeit auf, die wiederum zu einer ungleichmaessigen Verbindung der Si-Scheibe mit dem Glastraeger fuehrt. Als Vorbereitung der Optimierung wurden die unterschiedlich dicken Solarzellen (SZ) dieses speziellen Typs im eindimensionalen Simulationsprogramm PC1D mit allen ihren bekannten materialspezifischen und elektrischen Eigenschaften nachgebildet. Mit Hilfe dieser Simulationen in PC1D konnte schliesslich festgestellt werden, dass eine geringfuegige Reduktion des Serienwiderstandes genuegt, um die Effizienz der stabilisierten Solarzelle deutlich zu verbessern. Mit diesen Erkenntnissen wurde schliesslich die gezielte Optimierung der stabilisierten Solarzellen durchgefuehrt, die zu folgenden Ergebnissen fuehrte: 1. Durch die Veraenderung des Temperatur-Zeit-Profils des RTP-Schrittes ergibt sich eine Verbesserung der Solarzellen-Parameter fuer alle Si-Dicken. Das konnte auf die verbesserte Qualitaet des Al/Si-Rueckkontaktes zurueckgefuehrt werden. 2. Durch dickere Schichten des aufgedampften Aluminiums kann fuer 300 {mu}m und 120 {mu}m dicke Solarzellen die Passivierung an der SZ-Rueckseite verbessert werden. Bei duennen stabilisierten Solarzellen fuehrte diese Massnahme zur verstaerkten Shuntbildung und ergibt nicht die gewuenschte Reduktion der Rekombinationsgeschwindigkeit an der SZ-Rueckseite. 3. Ein zusaetzlicher Optimierungsschritt war die Einfuehrung der sog. Kombi-Methode, bei der ein Teil des aufgedampften Aluminiums durch Siebdruckpaste ersetzt wird. Durch diese Kombination und die passende Vorbereitung war es moeglich, das sehr

  20. MIT-Skywalker: Evaluating comfort of bicycle/saddle seat.

    Science.gov (United States)

    Goncalves, Rogerio S; Hamilton, Taya; Daher, Ali R; Hirai, Hiroaki; Krebs, Hermano I

    2017-07-01

    The MIT-Skywalker is a robotic device developed for the rehabilitation of gait and balance after a neurological injury. This device has been designed based on the concept of a passive walker and provides three distinct training modes: discrete movement, rhythmic movement, and balance training. In this paper, we present our efforts to evaluate the comfort of a bicycle/saddle seat design for the system's novel actuated body weight support device. We employed different bicycle and saddle seats and evaluated comfort using objective and subjective measures. Here we will summarize the results obtained from a study of fifteen healthy subjects and one stroke patient that led to the selection of a saddle seat design for the MIT-Skywalker.

  1. MIT LMFBR blanket research project. Final summary report

    International Nuclear Information System (INIS)

    Driscoll, M.J.

    1983-08-01

    This is a final summary report on an experimental and analytical program for the investigation of LMFBR blanket characteristics carried out at MIT in the period 1969 to 1983. During this span of time, work was carried out on a wide range of subtasks, ranging from neutronic and photonic measurements in mockups of blankets using the Blanket Test Facility at the MIT Research Reactor, to analytic/numerical investigations of blanket design and economics. The main function of this report is to serve as a resource document which will permit ready reference to the more detailed topical reports and theses issued over the years on the various aspects of project activities. In addition, one aspect of work completed during the final year of the project, on doubly-heterogeneous blanket configurations, is documented for the record

  2. Endokrinologische Behandlung der Geschlechtsdysphorie bei Menschen mit Geschlechtsinkongruenz

    Directory of Open Access Journals (Sweden)

    Flütsch N

    2015-01-01

    Full Text Available Es gibt Menschen, die die innere Gewissheit besitzen, dass ihre Geschlechtsidentität nicht zu ihrem biologischen Ursprungsgeschlecht passt. Durch die Entwicklungen in der Medizin in den letzten hundert Jahren ist es möglich geworden, die körperlichen Geschlechtsmerkmale an das innerlich erlebte Geschlecht anzupassen. Die Zahl der Hilfesuchenden in den ärztlichen Ambulanzen und Privatpraxen hat in den vergangenen Jahren deutlich zugenommen. Das Vorgehen bei der Diagnostik und Therapieeinleitung erlebt zurzeit eine deutliche Veränderung hin zu mehr Patientenzentriertheit und Individualisierung des Transitionsprozesses. Dabei bildet die geschlechtsangleichende Hormontherapie ein wesentliches Standbein in der körperlichen Angleichung an das Gegengeschlecht. Unter Beachtung von bestimmten Sicherheitsaspekten ist eine Hormontherapie mit Sexualhormonen sicher und einfach durchzuführen. Regelmäßige Verlaufskontrollen sowie der offene und affirmative Umgang mit den Betroffenen tragen zudem wesentlich zur Sicherheit in der Behandlung bei.

  3. Are the N and Δ deformed MIT bags

    International Nuclear Information System (INIS)

    Clement, G.; Maamache, M.

    1985-01-01

    The influence of the one-gluon exchange interaction, zero-point energy, and centre-of-mass correction, on the deformation of the nucleon and Δ bags, is studied in the MIT bag model. If the sharp MIT boundary conditions are taken seriously, the strong dependence of the zero-point energy on the deformation leads to the collapse of the N and Δ bags for realistic values of the strong fine structure constant α/sub S/. If on the other hand the zero-point energy is ignored altogether, then the nucleon, spherical for α/sub S/ 3.25, while the Δ is always prolate. The various predictions of the model are, for α/sub S/> or approx. =3.25, consistent with experiment, except for the proton magnetic moment which is only about 40% of the experimental value

  4. Properties of hybrid stars in an extended MIT bag model

    International Nuclear Information System (INIS)

    Bao Tmurbagan; Liu Guangzhou; Zhu Mingfeng

    2009-01-01

    The properties of hybrid stars are investigated in the framework of the relativistic mean field theory (RMFT) and an MIT bag model with density-dependent bag constant to describe the hadron phase (HP) and quark phase (QP), respectively. We find that the density-dependent B(ρ) decreases with baryon density ρ; this decrement makes the strange quark matter become more energetically favorable than ever; which makes the threshold densities of the hadron-quark phase transition lower than those of the original bag constant case. In this case, the hyperon degrees of freedom can not be considered. As a result, the equations of state of a star in the mixed phase (MP) become softer whereas those in the QP become stiffer, and the radii of the star obviously decrease. This indicates that the extended MIT bag model is more suitable to describe hybrid stars with small radii. (authors)

  5. Biomass energy development

    International Nuclear Information System (INIS)

    Ng'eny-Mengech, A.

    1990-01-01

    This paper deals more specifically with biomethanation process and non conventional sources of biomass energy such as water hyacinths and vegetable oil hydrocarbon fuels. It highlights socioeconomic issues in biomass energy production and use. The paper also contains greater details on chemical conversion methods and processes of commercial ethanol and methanol production. (author). 291 refs., 6 tabs

  6. 11 Soil Microbial Biomass

    African Journals Online (AJOL)

    186–198. Insam H. (1990). Are the soil microbial biomass and basal respiration governed by the climatic regime? Soil. Biol. Biochem. 22: 525–532. Insam H. D. and Domsch K. H. (1989). Influence of microclimate on soil microbial biomass. Soil Biol. Biochem. 21: 211–21. Jenkinson D. S. (1988). Determination of microbial.

  7. Hydrothermal conversion of biomass

    NARCIS (Netherlands)

    Knezevic, D.

    2009-01-01

    This thesis presents research of hydrothermal conversion of biomass (HTC). In this process, hot compressed water (subcritical water) is used as the reaction medium. Therefore this technique is suitable for conversion of wet biomass/ waste streams. By working at high pressures, the evaporation of

  8. World wide biomass resources

    NARCIS (Netherlands)

    Faaij, A.P.C.

    2012-01-01

    In a wide variety of scenarios, policy strategies, and studies that address the future world energy demand and the reduction of greenhouse gas emissions, biomass is considered to play a major role as renewable energy carrier. Over the past decades, the modern use of biomass has increased

  9. Hydrogen from biomass

    NARCIS (Netherlands)

    Claassen, P.A.M.; Vrije, de G.J.

    2006-01-01

    Hydrogen is generally regarded as the energy carrier of the future. The development of a process for hydrogen production from biomass complies with the policy of the Dutch government to obtain more renewable energy from biomass. This report describes the progress of the BWP II project, phase 2 of

  10. Elektrochemisches Verhalten von Lithium-Schwefel-Zellen mit unterschiedlicher Kathodenstruktur

    OpenAIRE

    Scherr, Christopher

    2014-01-01

    Die elektrochemische Energiespeicherung ist in der Elektromobilität und dezentralen Energieversorgung einer der wichtigsten Bausteine. Der Lithium-Schwefel-Akkumulator mit seinen hohen theoretischen Kennwerte hat das Potential in Zukunft, hierbei eine gewichtige Rolle zu spielen. Je nach Zusammensetzung und Herstellung der Kathode variieren die Kennwerte jedoch sehr stark. In dieser Arbeit wurde der Einfluss der Kathodenstruktur und -zusammensetzung auf die Kapazität und Lebensdauer untersuch...

  11. Quark matter revisited with non-extensive MIT bag model

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Pedro H.G.; Nunes da Silva, Tiago; Menezes, Debora P. [Universidade Federal de Santa Catarina, Departamento de Fisica, CFM, Florianopolis (Brazil); Deppman, Airton [Instituto de Fisica da Universidade de Sao Paulo, Sao Paulo (Brazil)

    2017-10-15

    In this work we revisit the MIT bag model to describe quark matter within both the usual Fermi-Dirac and the Tsallis statistics. We verify the effects of the non-additivity of the latter by analysing two different pictures: the first order phase transition of the QCD phase diagram and stellar matter properties. While the QCD phase diagram is visually affected by the Tsallis statistics, the resulting effects on quark star macroscopic properties are barely noticed. (orig.)

  12. Configuration management plan for Machine Interface Test System (MITS)

    International Nuclear Information System (INIS)

    O'Neill, C.K.

    1980-01-01

    The discipline required by this plan will apply from the establishment of a configuration baseline until completion of the final test in the MITS. The plan applies to configured items of hardware and software as well as to the specifications and drawings for these items. The plan encompasses establishment of the facility baseline, interface definition, classes of change, change control, change paper, organizational responsibilities and relationships, test configuration (as opposed to facility), and configuration data retention

  13. Optische Bildgebung der Autoimmunarthritis mit DiD markierten Leukozyten

    OpenAIRE

    Kau, Julia

    2008-01-01

    Zielsetzung: Ziel der vorliegenden Studie war es, zu untersuchen, ob die Optische Bildgebung nach Injektion von ex vivo DiD markierten Leukozyten, in der Lage ist, eine Entzündung der Synovialmembran in Ratten mit einer Antigen-induzierten Monoarthritis des rechten Kniegelenkes aufzudecken. Die Optische Bildgebung wurde auf ihre Fähigkeit zur Unterscheidung zwischen arthritischen und gesunden Kniegelenken und zwischen nichttherapierten und Kortison-therapierten Kniegelenken unt...

  14. Psychologie - Fachdatenbank mit europäischem Fokus

    OpenAIRE

    Schön, Dana

    2010-01-01

    Die Sichtbarkeit von europäischer Wissenschaftsliteratur ist notwendige Voraussetzung für deren Rezeption im internationalen Kontext. Ein bibliographisches Nachweissystem psychologischer Fachliteratur auf der Basis moderner Suchtechnologie mit Fokus auf europäischen Werken kann einen wichtigen Beitrag dazu leisten. Mehrere europäische Institute stellen ihre bibliographischen Datenbestände zum Aufbau einer umfassenden europäischen Fachdatenbank für die Psychologie zur Verfügung. Die Bereitstel...

  15. Qanti-QG hermaphrodite mesons in the MIT bag model

    International Nuclear Information System (INIS)

    Barnes, T.; Close, F.E.; Viron, F. de

    1982-10-01

    It is suggested that hermaphrodite (qanti-qg) mesons could exist with rather light masses. The spectrum of the ground state nonets, Jsup(PC) = (0, 1, 2) -+ ; 1 -- is calculated in the MIT bag model including 0(αsub(s)) energy shifts. Hadronic transitions among these states are discussed, considering their possible production at LEAR and SPEAR and indicating some interesting decay signatures. (author)

  16. Strategien zur HLA-Typisierung mit PyrosequencingTM

    OpenAIRE

    Entz, Patricia

    2006-01-01

    Der Haupthistokompatibilitätskomplex ist durch seine biologische Funktion eine für die Diagnostik und Forschung äußerst wichtige Region im humanen Genom. Die Untersuchung von HLA-Genorten stellt ein wichtiges Instrument in der molekulargenetischen Praxis dar. Die Pyrosequencing-Technik ist gut geeignet, um kurze DNA-Abschnitte mit weitgehend bekannter Sequenz schnell und effizient zu untersuchen. Ziel dieser Arbeit war die Entwicklung von Pyrosequencing-basierten Methoden zur HLA-Typisierung....

  17. Cost accounting in Kernforschungsanlage Juelich Gesellschaft mit beschraenkter Haftung (KFA)

    International Nuclear Information System (INIS)

    Seidel, G.; Schilling, H.

    1979-01-01

    The paper gives an overview about the organization and the research program of the Kernforschungsanalage Juelich Gesellschaft mit beschraenkter Haftung (KFA). The cost accounting system is discussed in detail, cost categories, cost centers, units of production and the data flow of the cost accounting are described. The distribution of the resulting management accounting reports and all sorts of EDP-result listings of the cost accounting system is described. (A.N.)

  18. Hydrothermal liquefaction of biomass

    DEFF Research Database (Denmark)

    Toor, Saqib; Rosendahl, Lasse; Rudolf, Andreas

    2011-01-01

    This article reviews the hydrothermal liquefaction of biomass with the aim of describing the current status of the technology. Hydrothermal liquefaction is a medium-temperature, high-pressure thermochemical process, which produces a liquid product, often called bio-oil or bi-crude. During...... the hydrothermal liquefaction process, the macromolecules of the biomass are first hydrolyzed and/or degraded into smaller molecules. Many of the produced molecules are unstable and reactive and can recombine into larger ones. During this process, a substantial part of the oxygen in the biomass is removed...... by dehydration or decarboxylation. The chemical properties of bio-oil are highly dependent of the biomass substrate composition. Biomass constitutes of various components such as protein; carbohydrates, lignin and fat, and each of them produce distinct spectra of compounds during hydrothermal liquefaction...

  19. Biomass power in transition

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, D.K. [Zurn/NEPCO, Redmond, WA (United States)

    1996-12-31

    Electricity production from biomass fuel has been hailed in recent years as an environmentally acceptable energy source that delivers on its promise of economically viable renewable energy. A Wall Street Journal article from three years ago proclaimed wood to be {open_quotes}moving ahead of costly solar panels and wind turbines as the leading renewable energy alternative to air-fouling fossils fuels and scary nuclear plants.{close_quotes} Biomass fuel largely means wood; about 90% of biomass generated electricity comes from burning waste wood, the remainder from agricultural wastes. Biomass power now faces an uncertain future. The maturing of the cogeneration and independent power plant market, restructuring of the electric industry, and technological advances with power equipment firing other fuels have placed biomass power in a competitive disadvantage with other power sources.

  20. Remarks on energetic biomass

    International Nuclear Information System (INIS)

    Mathis, Paul; Pelletier, Georges

    2011-01-01

    The authors report a study of energy biomass by considering its three main sources (forest, agriculture and wastes) and three energy needs (heat, fuel for transports, electricity) in the French national context. After having recalled the various uses of biomass (animal feeding, energy production, materials, chemical products), the authors discuss the characteristics of biomass with respect to other energy sources. Then, they analyse and discuss the various energy needs which biomass could satisfy: heat production (in industry, in the residential and office building sector), fuel for transports, electricity production. They assess and discuss the possible biomass production of its three main sources: forest, agriculture, and wastes (household, agricultural and industrial wastes). They also discuss the opportunities for biogas production and for second generation bio-fuel production

  1. Phylogenetic relationships of the Gomphales based on nuc-25S-rDNA, mit-12S-rDNA, and mit-atp6-DNA combined sequences

    Science.gov (United States)

    Admir J. Giachini; Kentaro Hosaka; Eduardo Nouhra; Joseph Spatafora; James M. Trappe

    2010-01-01

    Phylogenetic relationships among Geastrales, Gomphales, Hysterangiales, and Phallales were estimated via combined sequences: nuclear large subunit ribosomal DNA (nuc-25S-rDNA), mitochondrial small subunit ribosomal DNA (mit-12S-rDNA), and mitochondrial atp6 DNA (mit-atp6-DNA). Eighty-one taxa comprising 19 genera and 58 species...

  2. Nagelbefall kann bei Patienten mit Psoriasis auf eine Enthesiopathie hinweisen.

    Science.gov (United States)

    Castellanos-González, Maria; Joven, Beatriz Esther; Sánchez, Julio; Andrés-Esteban, Eva María; Vanaclocha-Sebastián, Francisco; Romero, Pablo Ortiz; Díaz, Raquel Rivera

    2016-11-01

    Obwohl subklinische Enthesiopathie ein gut etabliertes diagnostisches Merkmal der Psoriasisarthritis (PsA) ist, wird sie häufig übersehen, da viele Patienten asymptomatisch sind. Gäbe es klinische Hinweise auf das Vorliegen einer Enthesiopathie, würde dies den Klinikern die Möglichkeit eröffnen, eine PsA frühzeitig zu diagnostizieren. Es wurde eine monozentrische prospektive Studie mit insgesamt 90 Psoriasis-Patienten durchgeführt, um mittels Ultraschall das Vorliegen von Enthesenanomalien zu untersuchen und eine Korrelation mit dem Befall der Nägel festzustellen. Enthesenanomalien wurden bei 23 Patienten (25,5 %) gefunden, von denen 19 (82,6 %) Nagelbefall aufwiesen. Bei 4 Patienten waren die Nägel nicht betroffen. Enthesiopathie lag bei 31,1 % (19/61) der Patienten mit Onychopathie vor, von den Patienten ohne Nagelbefall litten nur 13,8 % (4/29) an Enthesiopathie (p = 0,07). Zwischen dem Target-NAPSI-Score und dem Vorliegen einer Enthesiopathie bestand eine signifikante Korrelation. Eine signifikante Korrelation bestand darüber hinaus auch zwischen dem Vorliegen einer Enthesiopathie und der Anzahl der betroffenen Nägel (p = 0,035). Klinische Belege für eine Onychopathie können der Schlüssel für die frühe Diagnose einer Enthesiopathie bei Psoriasis-Patienten sein. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  3. Effects of airplane emissions on the composition of the atmosphere: Investigations using a mesoscale chemical transport model; Der Einfluss von Flugzeugabgasen auf die Zusammensetzung der Atmosphaere: Untersuchungen mit einem mesoskaligen Chemie-Transport-Modell

    Energy Technology Data Exchange (ETDEWEB)

    Lippert, E

    1997-12-31

    In the present work the impact of aircraft emissions on the atmospheric composition is studied using a mesoscale chemistry transport model. To simulate the impact of aircraft exhausts several modifications on the EURAD model system have been performed. The upper boundary of the model has been extended from 100 hPa up to 10 hPa. The vertical resolution of the model has been refined especially in tropopause altitudes extending the number of model layers from 15 to 29. Additionally the initialization and the treatment of the boundary conditions has been improved by coupling the trace gas concentration fields with the individual meteorological situation. To guarantee an adequate representation of the atmospheric chemistry the chemical mechanism CHEST has been developed and implemented into the chemistry transport model. CHEST treats the most important chemical processes of the troposphere and lower stratosphere. In the frame of the present work sensitivity studies with a box model and with the threedimensional chemistry transport model have been performed to investigate the impact of aircraft emissions upon the atmosphere. (KW) [Deutsch] In der vorliegenden Arbeit werden die Auswirkungen der Flugzeugemissionen auf die Zusammensetzung der Atmosphaere mit Hilfe eines mesoskaligen Chemie-Transport-Modells untersucht. Zur Simulation der Ausbreitung der Flugzeugabgase wurden am EURAD-Modell-System umfangreiche Veraenderungen vorgenommen. Der obere Modellrand des Chemie-Transport-Modells ist von 100 hPa auf 10 hPa erhoeht worden. Die vertikale Aufloesung des Modells wurde insbesondere im Tropopausenbereich durch eine Erhoehung der Gesamtzahl der Modellschichten von 15 auf 29 wesentlich verfeinert. Ausserdem ist die Initialisierung der Spurenstoffverteilung im Modell an die Dynamik gekoppelt worden. Dem Chemie-Transport-Modell stehen damit an die jeweilige meteorologische Situation angepasste Konzentrationsfelder zur Initialisierung und zur Behandlung der Fluesse durch den

  4. Effects of airplane emissions on the composition of the atmosphere: Investigations using a mesoscale chemical transport model; Der Einfluss von Flugzeugabgasen auf die Zusammensetzung der Atmosphaere: Untersuchungen mit einem mesoskaligen Chemie-Transport-Modell

    Energy Technology Data Exchange (ETDEWEB)

    Lippert, E.

    1996-12-31

    In the present work the impact of aircraft emissions on the atmospheric composition is studied using a mesoscale chemistry transport model. To simulate the impact of aircraft exhausts several modifications on the EURAD model system have been performed. The upper boundary of the model has been extended from 100 hPa up to 10 hPa. The vertical resolution of the model has been refined especially in tropopause altitudes extending the number of model layers from 15 to 29. Additionally the initialization and the treatment of the boundary conditions has been improved by coupling the trace gas concentration fields with the individual meteorological situation. To guarantee an adequate representation of the atmospheric chemistry the chemical mechanism CHEST has been developed and implemented into the chemistry transport model. CHEST treats the most important chemical processes of the troposphere and lower stratosphere. In the frame of the present work sensitivity studies with a box model and with the threedimensional chemistry transport model have been performed to investigate the impact of aircraft emissions upon the atmosphere. (KW) [Deutsch] In der vorliegenden Arbeit werden die Auswirkungen der Flugzeugemissionen auf die Zusammensetzung der Atmosphaere mit Hilfe eines mesoskaligen Chemie-Transport-Modells untersucht. Zur Simulation der Ausbreitung der Flugzeugabgase wurden am EURAD-Modell-System umfangreiche Veraenderungen vorgenommen. Der obere Modellrand des Chemie-Transport-Modells ist von 100 hPa auf 10 hPa erhoeht worden. Die vertikale Aufloesung des Modells wurde insbesondere im Tropopausenbereich durch eine Erhoehung der Gesamtzahl der Modellschichten von 15 auf 29 wesentlich verfeinert. Ausserdem ist die Initialisierung der Spurenstoffverteilung im Modell an die Dynamik gekoppelt worden. Dem Chemie-Transport-Modell stehen damit an die jeweilige meteorologische Situation angepasste Konzentrationsfelder zur Initialisierung und zur Behandlung der Fluesse durch den

  5. Biomass CHP Catalog of Technologies

    Science.gov (United States)

    This report reviews the technical and economic characterization of biomass resources, biomass preparation, energy conversion technologies, power production systems, and complete integrated CHP systems.

  6. Modeling of biomass pyrolysis

    International Nuclear Information System (INIS)

    Samo, S.R.; Memon, A.S.; Akhund, M.A.

    1995-01-01

    The fuels used in industry and power sector for the last two decades have become expensive. As a result renewable energy source have been emerging increasingly important, of these, biomass appears to be the most applicable in the near future. The pyrolysis of biomass plays a key role amongst the three major and important process generally encountered in a gas producer, namely, pyrolysis, combustion and reduction of combustion products. Each biomass has its own pyrolysis characteristics and this important parameters must be known for the proper design and efficient operation of a gasification system. Thermogravimetric analysis has been widely used to study the devolatilization of solid fuels, such as biomass. It provides the weight loss history of a sample heated at a predetermined rate as a function of time and temperature. This paper presents the experimental results of modelling the weight loss curves of the main biomass components i.e. cellulose, hemicellulose and lignin. Thermogravimetric analysis of main components of biomass showed that pyrolysis is first order reaction. Furthermore pyrolysis of cellulose and hemicelluloe can be regarded as taking place in two stages, for while lignin pyrolysis is a single stage process. This paper also describes the Thermogravimetric Analysis (TGA) technique to predict the weight retained during pyrolysis at any temperature, for number of biomass species, such as cotton stalk, bagasse ad graoundnut shell. (author)

  7. The biomass file

    International Nuclear Information System (INIS)

    2010-01-01

    As biomass represents the main source of renewable energy to reach the 23 per cent objective in terms of energy consumption by 2020, a first article gives a synthetic overview of its definition, its origins, its possible uses, its share in the French energy mix, its role by 2020, strengths and weaknesses for its development, the growth potential of its market, and its implications in terms of employment. A second article outlines the assets of biomass, indicates the share of some crops in biomass energy production, and discusses the development of new resources and the possible energy valorisation of various by-products. Interviews about biomass market and development perspectives are proposed with representatives of institutions, energy industries and professional bodies concerned with biomass development and production. Other articles comments the slow development of biomass-based cogeneration, the coming into operation of a demonstration biomass roasting installation in Pau (France), the development potential of biogas in France, the project of bio natural gas vehicles in Lille, and the large development of biogas in Germany

  8. Biomass in Germany

    International Nuclear Information System (INIS)

    Chapron, Thibaut

    2014-01-01

    This document provides, first, an overview of biomass industry in Germany: energy consumption and renewable energy production, the French and German electricity mix, the 2003-2013 evolution of renewable electricity production and the 2020 forecasts, the biomass power plants, plantations, biofuels production and consumption in Germany. Then, the legal framework of biofuels development in Germany is addressed (financial incentives, tariffs, direct electricity selling). Next, a focus is made on biogas production both in France and in Germany (facilities, resources). Finally, the French-German cooperation in the biomass industry and the research actors are presented

  9. Aerosols from biomass combustion

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T

    2001-07-01

    This report is the proceedings of a seminar on biomass combustion and aerosol production organised jointly by the International Energy Agency's (IEA) Task 32 on bio energy and the Swiss Federal Office of Energy (SFOE). This collection of 16 papers discusses the production of aerosols and fine particles by the burning of biomass and their effects. Expert knowledge on the environmental impact of aerosols, formation mechanisms, measurement technologies, methods of analysis and measures to be taken to reduce such emissions is presented. The seminar, visited by 50 participants from 11 countries, shows, according to the authors, that the reduction of aerosol emissions resulting from biomass combustion will remain a challenge for the future.

  10. Catalytic biomass pyrolysis process

    Science.gov (United States)

    Dayton, David C.; Gupta, Raghubir P.; Turk, Brian S.; Kataria, Atish; Shen, Jian-Ping

    2018-04-17

    Described herein are processes for converting a biomass starting material (such as lignocellulosic materials) into a low oxygen containing, stable liquid intermediate that can be refined to make liquid hydrocarbon fuels. More specifically, the process can be a catalytic biomass pyrolysis process wherein an oxygen removing catalyst is employed in the reactor while the biomass is subjected to pyrolysis conditions. The stream exiting the pyrolysis reactor comprises bio-oil having a low oxygen content, and such stream may be subjected to further steps, such as separation and/or condensation to isolate the bio-oil.

  11. Biomass for green cement

    Energy Technology Data Exchange (ETDEWEB)

    Cumming, R. [Lafarge Canada Inc., Calgary, AB (Canada)

    2006-07-01

    Lafarge examined the use of waste biomass products in its building materials and provided background information on its operations. Cement kiln infrastructure was described in terms of providing access to shipping, rail and highways; conveying and off-loading equipment; having large storage facilities; and, offering continuous monitoring and stack testing. The presentation identified the advantages and disadvantages of a few different biomass cases such as coal; scrap tires; non-recyclable household waste; and processed biomass. A chart representing landfill diversion rates was presented and the presentation concluded with a discussion of energy recovery and recycling. 1 tab., figs.

  12. Electricity from biomass

    International Nuclear Information System (INIS)

    Price, B.

    1998-11-01

    Electricity from biomass assesses the potential of biomass electricity for displacing other more polluting power sources and providing a relatively clean and ecologically friendly source of energy; discusses its environmental and economic effects, while analysing political and institutional initiatives and constraints; evaluates key factors, such as energy efficiency, economics, decentralisation and political repurcussions; considers the processes and technologies employed to produce electricity from biomass; and discusses the full range of incentives offered to producers and potential producers and the far-reaching implications it could have for industry, society and the environment. (author)

  13. Fluidized-bed gasification of biomass: Conversion of fine carabon particles in the freeboard; Biomassevergasung in der Wirbelschicht: Umsatz von feinen Kohlenstoffpartikeln im Freeboard

    Energy Technology Data Exchange (ETDEWEB)

    Miccio, F [Ist. Ricerche sulla Combustione-CNR, Napoli (Italy); Moersch, O; Spliethoff, H; Hein, K R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen

    1998-09-01

    The conversion of carbon particles in gasification processes was investigated in a fluidized-bed reactor of the Institute of Chemical Engineering and Steam Boiler Technology of Stuttgart University. This reactor is heated electrically to process temperature, and freeboard coal particles can be sampled using an isokinetic probe. The fuel used in the experiments consisted of beech wood chips. The temperature and air rating, i.e. the main parameters of the process, were varied in order to investigate their influence on product gas quality and carbon conversion. The conversion rate is influenced to a significant extent by grain disintegration and discharge of carbon particles. In gasification conditions, a further conversion process takes place in the freeboard. (orig.) [Deutsch] In dieser Arbeit wird die Umsetzung von Kohlenstoffpartikeln unter Vergasungsbedingungen untersucht. Die Versuche wurden an einem Wirbelschichtreaktor des Instituts fuer Verfahrenstechnik und Dampfkesselwesen der Universitaet Stuttgart durchgefuehrt. Dieser Reaktor wird elektrisch auf Prozesstemperatur beheizt. Mit Hilfe einer isokinetischen Sonde koennen Proben von Kohlenstoffpartikeln im Freeboard genommen werden. Als Brennstoff wurden zerkleinerte Buchenholz-Hackschnitzel eingesetzt. Variiert wurden als Hauptparameter des Prozesses Temperatur und Luftzahl. Untersucht wurde der Einfluss dieser Parameter auf die Qualitaet des Produktgases und die Umsetzung des Kohlenstoffes. Kornzersetzungs- und Austragsvorgaenge von Kohlenstoffpartikeln spielen eine wichtige Rolle fuer den Kohlenstoffumsatz. Unter Vergasungsbedingungen findet im Freeboard eine weitere Umsetzung der Partikel statt. (orig.)

  14. Physikalische Grundlagen von chemischen Raman-Sensoren mit Schwerpunkt auf faseroptischen SERS-Sonden

    OpenAIRE

    Viets, Carmen

    2001-01-01

    Faseroptische SERS-Sensoren wurden durch die Beschichtung der Endflächen von optischen Fasern mit rauhen Metallfilmen erzeugt. Zu den verschiedenen Präparationstechniken, die angewendet und verglichen wurden, gehörten das langsame Aufdampfen von Metall-Inselfilmen und das Bedampfen von Nanopartikeln, aufgerauhten oder elektronenlithographisch strukturierten Oberflächen mit Metallfilmen. Der Einfluß der Laserleistung auf die Messungen mit SERS-Sensoren wurde untersucht, und es wurden maximale ...

  15. Quantitative Datenanalyse: Arbeiten mit SPSS Statistics : Eine Einführung

    OpenAIRE

    Hoidn, Sabine

    2012-01-01

    Bei diesem Buch handelt es sich um eine verständliche Einführung in das Arbeiten mit dem quantitativen Datenanalyseprogramm SPSS Statistics. Die Studierenden setzen sich mit den Grundlagen zum Arbeiten mit SPSS Statistics auseinander, können selbständig eine SPSS Statistics-Datei erstellen, Daten einlesen, zusammenfügen und modifizieren, erfasste Daten managen und die gebräuchlichsten tabellarischen und grafischen Grundauswertungen sowie Analyseverfahren durchführen und interpretieren. Au...

  16. The development of form two mathematics i-Think module (Mi-T2)

    Science.gov (United States)

    Yao, Foo Jing; Abdullah, Mohd Faizal Nizam Lee; Tien, Lee Tien

    2017-05-01

    This study aims to develop a training module i-THINK Mathematics Form Two (Mi-T2) to increase the higher-order thinking skills of students. The Mi-T2 training module was built based on the Sidek Module Development Model (2001). Constructivist learning theory, cognitive learning theory, i-THINK map and higher order thinking skills were the building blocks of the module development. In this study, researcher determined the validity and reliability of Mi-T2 module. The design being used in this study was descriptive study. To determine the needs of Mi-T2 module, questionnaires and literature review were used to collect data. When the need of the module was determined, the module was built and a pilot study was conducted to test the reliability of the Mi-T2 module. The pilot study was conducted at a secondary school in North Kinta, Perak. A Form Two class was selected to be the sample study through clustered random sampling. The pilot study was conducted for two months and one topic had been studied. The Mi-T2 module was evaluated by five expert panels to determine the content validity of the module. The instruments being used in the study were questionnaires about the necessity of the Mi-T2 module for guidance, questionnaires about the validity of the module and questionnaires concerning the reliability of the module. Statistical analysis was conducted to determine the validity and reliability coefficients of the Mi-T2 module. The content validity of Mi-T2 module was determined by Cohen's Kappa's (1968) agreement coefficient and the reliability of Mi-T2 module was determined by Cronbach Alpha's value scale. The content validity of Mi-T2 module was 0.89 and the Cronbach Alpha's value of Mi-T2 module was 0.911.

  17. Der Ritter mit dem Hemd : drei Fassungen einer mittelalterlichen Erzählung

    OpenAIRE

    Dunphy, Graeme

    2011-01-01

    Unter den zahlreichen Motiven, die in der mittelalterlichen Literatur mit Frauendienst verbunden sind, gehört das vom Ritter mit dem Hemd zu den besonders interessanten. Es erscheint zunächst in dem ersten von fünf Fabliaux aus einer verlorenen Turiner Handschrift, die dem sonst unbekannten altfranzösischen Dichter Jacques de Baisieux zugeschrieben werden, einer heiteren Kurzgeschichte mit dem Titel "Des trois chevaliers et del chainse". In der vorliegenden Untersuchung gilt es, der Frage der...

  18. Quantitative CT assessment of proximal femoral bone density. An experimental study concerning its correlation to breaking load for femoral neck fractures; Quantitative CT des proximalen Femurs. Experimentelle Untersuchungen zur Korrelation mit der Bruchlast bei Schenkelhalsfrakturen

    Energy Technology Data Exchange (ETDEWEB)

    Buitrago-Tellez, C.H.; Schulze, C.; Gufler, H.; Langer, M. [Abt. Roentgendiagnostik, Radiologische Universitaetsklinik, Albert-Ludwigs-Univ. Freiburg (Germany); Bonnaire, F.; Hoenninger, A.; Kuner, E. [Abt. Unfallchirurgie, Chirurgische Universitaetsklinik, Albert-Ludwigs-Univ. Freiburg (Germany)

    1997-12-01

    Purpose: In an experimental study, the correlation between the trabecular bone density of the different regions of the proximal femur and the fracture load in the setting of femoral neck fractures was examined. Methods: The bone mineral density 41 random proximal human femora was estimated by single-energy quanitative CT (SE-QCT). The trabecular bone density was measured at the greatest possible extracortical volume at midcapital, midneck and intertrochanteric level and in the 1 cm{sup 3} volumes of the centres of these regions in a standardised 10 mm thick slice in the middle of the femoral neck axis (in mg/ml Ca-hydroxyl apatite). The proximal femora were then isolated and mounted on a compression/bending device under two-legged stand conditions and loaded up to the point when a femoral neck fracture occurred. Results: Statistical analysis revealed a linear correlation between the trabecular bone density and the fracture load for the greater regions, with the highest value in the maximal area of the head (coefficient factor r=0.76). Conclusion: According to our data, the measurement of the trabecular bone by SE-QCT at the femoral head is a more confident adjunct than the neck or trochanteric area to predict a femoral neck fracture. (orig.) [Deutsch] Ziel: In einer experimentellen Versuchsserie wurde der Zusammenhang zwischen der Knochendichte an verschiedenen Lokalisationen des proximalen Femurs und der maximalen Last bei der Entstehung von Schenkelhalsfrakturen (Bruchlast) untersucht. Methode: An 41 frisch entnommenen proximalen Leichenfemora wurde die trabekulaere Knochendichte mit Hilfe der Ein-Energie Quantitativen Computertomographie (SE-QCT) bei einer Schichtdicke von 10 mm in der Mitte der Schenkelhalsachse bestimmt. Erfasst wurden die maximale extrakortikale, zylinderfoermige Messregion im Hueftkopf, Schenkelhals und der Intertrochantaerregion sowie das 1 cm{sup 3} umfassende Zentrum dieser Regionen. Die Praeparate wurden unter Zweibeinstandbedingungen

  19. Termisk forgasning af biomasse

    DEFF Research Database (Denmark)

    Henriksen, Ulrik Birk

    2005-01-01

    The title of this Ph.D. thesis is: Thermal Gasification of Biomass. Compilation of activities in the ”Biomass Gasification Group” at Technical University of Denmark (DTU). This thesis gives a presentation of selected activities in the Biomass Gasification Group at DTU. The activities are related...... to thermal gasification of biomass. Focus is on gasification for decentralised cogeneration of heat and power, and on related research on fundamental processes. In order to insure continuity of the presentation the other activities in the group, have also been described. The group was started in the late...... of these activities has been fruitful. The two- stage gasifier was developed for gasification aiming at decentralised cogeneration of heat and power. The development ranged from lap-top scale equipment to a fully automatic plant with more than 2000 hours of operation. Compared to most other gasification processes...

  20. Biomass_Master

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Biomass data found in this data set are broken into four regions of the Northeast US Continental Shelf Large Marine Ecosystem: Gulf of Maine, Georges Bank,...

  1. Biomass for bioenergy

    DEFF Research Database (Denmark)

    Bentsen, Niclas Scott

    Across the range of renewable energy resources, bioenergy is probably the most complex, as using biomass to support energy services ties into a number of fields; climate change, food production, rural development, biodiversity and environmental protection. Biomass offer several options...... for displacing fossil resources and is perceived as one of the main pillars of a future low-carbon or no-carbon energy supply. However, biomass, renewable as it is, is for any relevant, time horizon to be considered a finite resource as it replenishes at a finite rate. Conscientious stewardship of this finite...... the undesirable impacts of bioenergy done wrong. However, doing bioenergy right is a significant challenge due to the ties into other fields of society. Fundamentally plant biomass is temporary storage of solar radiation energy and chemically bound energy from nutrients. Bioenergy is a tool to harness solar...

  2. Hydrothermal liquefaction of biomass

    DEFF Research Database (Denmark)

    Toor, Saqib; Rosendahl, Lasse; Hoffmann, Jessica

    2014-01-01

    Biomass is one of the most abundant sources of renewable energy, and will be an important part of a more sustainable future energy system. In addition to direct combustion, there is growing attention on conversion of biomass into liquid en-ergy carriers. These conversion methods are divided...... into biochemical/biotechnical methods and thermochemical methods; such as direct combustion, pyrolysis, gasification, liquefaction etc. This chapter will focus on hydrothermal liquefaction, where high pressures and intermediate temperatures together with the presence of water are used to convert biomass...... into liquid biofuels, with the aim of describing the current status and development challenges of the technology. During the hydrothermal liquefaction process, the biomass macromolecules are first hydrolyzed and/or degraded into smaller molecules. Many of the produced molecules are unstable and reactive...

  3. Wirksamkeit und Sicherheit von Fumarsäureestern in Kombination mit Phototherapie bei Patienten mit moderater bis schwerer Plaque-Psoriasis (FAST).

    Science.gov (United States)

    Weisenseel, Peter; Reich, Kristian; Griemberg, Wiebke; Merten, Katharina; Gröschel, Christine; Gomez, Natalie Nunez; Taipale, Kirsi; Bräu, Beate; Zschocke, Ina

    2017-02-01

    Die Behandlung von Psoriasis-Patienten mit einer Kombination aus Fumarsäureestern (FSE, Fumaderm ® ) und Phototherapie (UV) ist verbreitet, wurde aber im Rahmen von Studien wenig untersucht. Bisher liegen lediglich Daten aus einer kleinen Pilotstudie vor. Intention dieser Studie war, eine FSE/UV-Kombinationsbehandlung an einem größeren Patientenkollektiv mit mittelschwerer bis schwerer Psoriasis zu untersuchen. In dieser prospektiven, multizentrischen, nichtinterventionellen Studie wurden Daten von Patienten mit FSE/UV-Kombinationstherapie hinsichtlich der Wirksamkeit (PGA' PASI, DLQI, EQ-5D), Sicherheit und Dosierung über einen Zeitraum von zwölf Monaten erfasst und mit Daten einer retrospektiven Studie mit FSE-Monotherapie verglichen. Es wurden Daten von 363 Patienten ausgewertet. Unter der Kombinationstherapie verbesserten sich alle Wirksamkeitsparameter deutlich. Im Vergleich zur Monotherapie mit FSE konnte durch die Kombination mit UV ein schnellerer Wirkeintritt erzielt werden, wobei nach zwölf Monaten kein Unterschied in der Wirksamkeit bestand. Die Dauer und Art der Phototherapie zeigte keinen Einfluss auf die Wirksamkeitsparameter. Allgemein wurde die Kombinationstherapie gut vertragen. Unerwünschte Ereignisse wurden bei 7 % der Patienten berichtet. Die FSE/UV Kombinationstherapie zeigt eine gute Wirksamkeit und Verträglichkeit und kann zu einem schnelleren Wirkeintritt führen. Eine Kombinationstherapie erscheint vor allem in den ersten drei Monaten der FSE Behandlung sinnvoll. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  4. 2007 Biomass Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-27

    The Biomass Program is actively working with public and private partners to meet production and technology needs. With the corn ethanol market growing steadily, researchers are unlocking the potential of non-food biomass sources, such as switchgrass and forest and agricultural residues. In this way, the Program is helping to ensure that cost-effective technologies will be ready to support production goals for advanced biofuels.

  5. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2011-01-01

    The primary energy production from solid biomass in the European Union reached 79.3 Mtoe in 2010 which implies a growth rate of 8% between 2009 and 2010. The trend, which was driven deeper by Europe's particularly cold winter of 2009-2010, demonstrates that the economic down-turn failed to weaken the member states' efforts to structure the solid biomass sector. Heat consumption rose sharply: the volume of heat sold by heating networks increased by 18% and reached 6.7 Mtoe and if we consider the total heat consumption (it means with and without recovery via heating networks) the figure is 66 Mtoe in 2010, which amounts to 10.1% growth. The growth of electricity production continued through 2010 (8.3% up on 2009) and rose to 67 TWh but at a slower pace than in 2009 (when it rose by 11.3% on 2008). The situation of the main producer countries: Sweden, Finland, Germany and France is reviewed. It appears that cogeneration unit manufacturers and biomass power plant constructors are the main beneficiaries of the current biomass energy sector boom. There is a trend to replace coal-fired plants that are either obsolete or near their end of life with biomass or multi-fuel plants. These opportunities will enable the industry to develop and further exploit new technologies such as gasification, pyrolysis and torrefaction which will enable biomass to be turned into bio-coal. (A.C.)

  6. Biomass feedstock analyses

    Energy Technology Data Exchange (ETDEWEB)

    Wilen, C.; Moilanen, A.; Kurkela, E. [VTT Energy, Espoo (Finland). Energy Production Technologies

    1996-12-31

    The overall objectives of the project `Feasibility of electricity production from biomass by pressurized gasification systems` within the EC Research Programme JOULE II were to evaluate the potential of advanced power production systems based on biomass gasification and to study the technical and economic feasibility of these new processes with different type of biomass feed stocks. This report was prepared as part of this R and D project. The objectives of this task were to perform fuel analyses of potential woody and herbaceous biomasses with specific regard to the gasification properties of the selected feed stocks. The analyses of 15 Scandinavian and European biomass feed stock included density, proximate and ultimate analyses, trace compounds, ash composition and fusion behaviour in oxidizing and reducing atmospheres. The wood-derived fuels, such as whole-tree chips, forest residues, bark and to some extent willow, can be expected to have good gasification properties. Difficulties caused by ash fusion and sintering in straw combustion and gasification are generally known. The ash and alkali metal contents of the European biomasses harvested in Italy resembled those of the Nordic straws, and it is expected that they behave to a great extent as straw in gasification. Any direct relation between the ash fusion behavior (determined according to the standard method) and, for instance, the alkali metal content was not found in the laboratory determinations. A more profound characterisation of the fuels would require gasification experiments in a thermobalance and a PDU (Process development Unit) rig. (orig.) (10 refs.)

  7. Pre- and post-operative evaluation of ventricular function, muscle mass and valve morphology by MR tomography in Ebstein's anomaly; Prae- und postoperative Beurteilung der ventrikulaeren Funktion, Muskelmasse und Klappenmorphologie bei der Ebstein-Anomalie mit der Magnetresonanztomographie

    Energy Technology Data Exchange (ETDEWEB)

    Gutberlet, M.; Oellinger, H.; Amthauer, H.; Hoffmann, T.; Felix, R. [Charite-Campus Virchow, Berlin (Germany). Klinik fuer Strahlenheilkunde; Ewert, P.; Nagdyman, N.; Lange, P. [Deutsches Herzzentrum Berlin (Germany). Abt. fuer Angeborene Herzfehler/Kinderkardiologie; Hetzer, R. [Deutsches Herzzentrum Berlin (Germany). Abt. fuer Herz-, Thorax- und Gefaesschirurgie

    2000-05-01

    .5 Tesla Kernspintomographen untersucht. Zur Klaerung der Anatomie wurde eine EKG-getriggerte SE-Sequenz, zur Beurteilung der Klappenmorphologie, -funktion und der Volumetrie eine CINE-GE-Sequenz mit retrospektivem Gating verwendet. In Multislice-Multiphasentechnik wurden mit Hilfe der 'Scheibchensummationsmethode' nach manueller Segmentierung der endo- und epikardialen Flaechen fuer beide Ventrikel das endsystolische (ESV) und enddiastolische Volumen (EDV), die Ejektionsfraktion (EF), das Schlagvolumen (5V) und die Muskelmasse (MM) bestimmt. Ergebnisse: Die Lokalisation einzelner Anteile der Trikuspidalklappe (TK) konnte in der Regel in den statischen SE-Sequenzen nur begrenzt, im CINE-Mode bei allen Patienten beurteilt werden. Wie mit der Doppler-Echokardiographie war eine qualitative Beurteilung der TK-Insuffizienz mit der CINE-MRT moeglich und lag praeoperativ im Mittel bei Grad 1,8 ({+-}0,8), postoperativ bei 0,7 ({+-}0,5). Die mittlere rechtsventrikulaere EF lag praeoperativ bei 41,8% ({+-}6,4), postoperativ bei 47,9% ({+-}10,6). Die mittlere linksventrikulaere EF lag praeoperativ bei 47,4% ({+-}8,5), postoperativ bei 63,0% ({+-}9,4). Schlussfolgerung: Zur Beurteilung der Klappenmorphologie sollte die CINE-MRT eher als die statische Darstellung in SE-Technik eingesetzt werden. Die EF und Muskelmasse koennen mit der CINE-MRT bestimmt werden. Eine qualitative Beurteilung des Insuffizienzgrades der TK ist ebenfalls moeglich. (orig.)

  8. Kompressionstherapie - Versorgungspraxis: Informationsstand von Patienten mit Ulcus cruris venosum.

    Science.gov (United States)

    Protz, Kerstin; Heyer, Kristina; Dissemond, Joachim; Temme, Barbara; Münter, Karl-Christian; Verheyen-Cronau, Ida; Klose, Katharina; Hampel-Kalthoff, Carsten; Augustin, Matthias

    2016-12-01

    Eine Säule der kausalen Therapie bei Patienten mit Ulcus cruris venosum ist die Kompressionstherapie. Sie unterstützt die Abheilung, reduziert Schmerzen und Rezidive und steigert die Lebensqualität. Bislang existieren kaum wissenschaftliche Daten zu dem Versorgungsstand und fachspezifischem Wissen von Patienten mit Ulcus cruris venosum. Standardisierte Fragebögen wurden bundesweit in 55 Pflegediensten, 32 Arztpraxen, vier Wundzentren und -sprechstunden sowie einem Pflegetherapiestützpunkt von Patienten mit Ulcus cruris venosum bei Erstvorstellung anonym ausgefüllt. Insgesamt nahmen 177 Patienten (Durchschnittsalter 69,4 Jahre; 75,1 % Frauen) teil. Ein florides Ulcus cruris venosum bestand im Mittel 17 Monate. 31,1 % hatten keine Kompressionstherapie, 40,1 % Binden und 28,8 % Strümpfe. Bei der Bestrumpfung hatten 13,7 % Kompressionsklasse III, 64,7 % Kompressionsklasse II und 19,6 % Kompressionsklasse I. 70,6 % legten die Strümpfe nach dem Aufstehen an, 21,1 % trugen sie Tag und Nacht. 39,2 % bereiteten die Strümpfe Beschwerden. Lediglich 11,7 % hatten eine An- und Ausziehhilfe. Die Binden wurden im Mittel 40,7 Wochen getragen und bei 69 % nicht unterpolstert. Bei 2,8 % wurde der Knöchel- und Waden-Umfang zur Erfolgskontrolle gemessen. Venensport machten 45,9 %. Ein Drittel hatte keine Kompressionsversorgung, obwohl diese eine Basismaßnahme der Therapie des Ulcus cruris venosum ist. Zudem ist deren korrekte Auswahl und Anwendung angesichts der langen Bestandsdauer der Ulzerationen zu hinterfragen. Weiterführende Fachkenntnisse bei Anwendern und Verordnern sowie Patientenschulungen sind erforderlich. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  9. Comments on the MIT Assessment of the Mars One Plan

    Science.gov (United States)

    Jones, Harry W.

    2015-01-01

    The MIT assessment of the Mars One mission plan reveals design assumptions that would cause significant difficulties. Growing crops in the crew chamber produces excessive oxygen levels. The assumed in-situ resource utilization (ISRU) equipment has too low a Technology Readiness Level (TRL). The required spare parts cause a large and increasing launch mass logistics burden. The assumed International Space Station (ISS) Environmental Control and Life Support (ECLS) technologies were developed for microgravity and therefore are not suitable for Mars gravity. Growing food requires more mass than sending food from Earth. The large number of spares is due to the relatively low reliability of ECLS and the low TRL of ISRU. The Mars One habitat design is similar to past concepts but does not incorporate current knowledge. The MIT architecture analysis tool for long-term settlements on the Martian surface includes an ECLS system simulation, an ISRU sizing model, and an analysis of required spares. The MIT tool showed the need for separate crop and crew chambers, the large spare parts logistics, that crops require more mass than Earth food, and that more spares are needed if reliability is lower. That ISRU has low TRL and ISS ECLS was designed for microgravity are well known. Interestingly, the results produced by the architecture analysis tool - separate crop chamber, large spares mass, large crop chamber mass, and low reliability requiring more spares - were also well known. A common approach to ECLS architecture analysis is to build a complex model that is intended to be all-inclusive and is hoped will help solve all design problems. Such models can struggle to replicate obvious and well-known results and are often unable to answer unanticipated new questions. A better approach would be to survey the literature for background knowledge and then directly analyze the important problems.

  10. Elastolysen und Hauterkrankungen mit Verlust der elastischen Fasern.

    Science.gov (United States)

    Tronnier, Michael

    2018-02-01

    Die elastischen Fasern sind neben den kollagenen Fasern der wichtigste Bestandteil des Bindegewebsgerüstes der Haut. Eine Verminderung oder ein Verlust der elastischen Fasern ist bei einer Vielzahl von klinisch sich unterschiedlich präsentierenden Erkrankungen, hereditär oder erworben, beschrieben. Bei den Erkrankungen, die mit einer Entzündung einhergehen ist die Elastophagozytose ein wichtiges histologisches Merkmal. Die Therapie der Erkrankungen dieser Gruppe ist grundsätzlich schwierig. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  11. Innovative facades with photovoltaics; Innovative Fassaden mit Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Eicker, U. [Hochschule fuer Technik, Stuttgart (Germany)

    1999-10-01

    Having grown at a rate of 15% since the middle of the 1980s the photovoltaic market today commands an annual module production of more than 100 MW{sub p}. In Germany altogether 10,000 PV systems with a total power output of 10 MW{sub p} were newly installed in 1997 alone. In 1990 the market was boosted by the heavily subsidised 1000 roofs programme, under which in the end more than 2,000 systems were installed on the roofs of mostly one-family houses. With power ratings ranging from 1 to 5 kW these decentral plants require roof surface areas between 10 and 50 m-2. On average they generate 800 kWh of electricity per kW of installed power. According to a number of studies carried out in the early 1990s the total surface area on buildings available for photovoltaics amounts to an enormous potential of 1,000 km-2, which is equivalent to an electricity generating potential of 130 TWh (100 TWh on roofs and 30 TWh on facades), or 25% of Germany`s total electricity demand. The degree to which this potential will be realised in the long term will notably depend on whether convincing architectural solutions are found for integrating photovoltaic plants in roofs and facades. [Deutsch] Der Photovoltaikmarkt waechst weltweit seit Mitte der 80er Jahre um durchschnittlich 15% und liegt heute bei einer Jahresmodulproduktion ueber 100 MW{sub p}. In Deutschland wurden alleine 1997 etwa 10.000 PV-Systeme mit einer Gesamtleistung von 10 MW{sub p} installiert. Die Marktentwicklung wurde 1990 mit dem stark subventionierten 1000-Daecher Programm angestossen, in welchem schliesslich mehr als 2000 Systeme meist auf Daechern von Einfamilienhaeusern installiert wurden. Diese dezentralen Anlagen mit Leistungen zwischen 1 und 5 kW erfordern Dachflaechen zwischen 10 und 50 m{sup 2} und erzeugen im Schnitt 800 kWh Strom pro kW installierter Leistung. Das verfuegbare Flaechenpotential von Gebaeuden wurde Anfang der 90er Jahre in einer Reihe von Studien ermittelt und stellt mit etwa 1000 km{sup 2

  12. Die Behandlung des Akustikusneurinoms mit dem Gamma-Knife

    OpenAIRE

    Hempel, Elizabeta

    2005-01-01

    Das Akustikusneurinom ist mit ca. 6% der häufigste intrakranielle Tumor und hat eine jährliche Inzidenz von 1:100000. Die durchschnittliche Wachstumsrate beträgt 2 mm pro Jahr, wobei es auch Akustikusneurinome gibt, die sehr viel schneller wachsen können. Bei der Behandlung des Schwannoms stehen uns zwei Modalitäten zur Verfügung. Die konventionelle Chirurgie und die stereotaktische Radiochirurgie, zu der die Gamma-Knife Therapie und der Linearbeschleuniger zählen. Sorgfältig ausgesuchte P...

  13. Content Management von Leittexten mit XML Topic Maps

    Directory of Open Access Journals (Sweden)

    Johannes Busse

    2003-07-01

    Full Text Available Die Autoren definieren den Umgang mit internet- basierten Informations- und Kommunikationstechnologien als Schlüsselqualifikation für Studierende aller Fachrichtungen. Im vorliegenden Aufsatz beschreiben sie ein Projekt, das der Fachbereich Erziehungswissenschaften der Universität Heidelberg seit 2001 durchführt. Hier werden Studierende der Geistes- und Sozialwissenschaften zu "Lernberatern" ausgebildet, die als Multiplikatoren die notwendigen Kenntnisse erwerben. Die Teilnehmenden erarbeiten nach der "Leittextmethode" selbstgesteuert xml-basierte Contents. Dies setzt den Erwerb von informationstechnischen Kenntnissen voraus, der neben dem Aufbau eines (sowohl technischen als auch sozialen Netzwerks einen Schwerpunkt bildet.

  14. Automatic control and monitoring of the MIT fission converter beam

    International Nuclear Information System (INIS)

    Wilson, B.A.; Riley, K.J.; Harling, O.K.

    2000-01-01

    An automated control and monitoring system for the new MIT high intensity epithermal neutron irradiation facility has been designed and constructed. The neutron beam is monitored with fission counters located at the periphery of the beam near the patient position. Control of the beam is accomplished with redundant Programmable Logic Controllers (PLCs). These industrial controllers open and close the three shutters of the Fission Converter Beam. The control system uses a series of robust components to assure that the prescribed fluence is delivered. This paper discusses the design and implementation of this system. (author)

  15. M1-transitions in the MIT bag model

    International Nuclear Information System (INIS)

    Hackman, R.H.; Deshpande, N.G.; Dicus, D.A.; Teplitz, V.L.

    1977-03-01

    In the MIT bag model, the M1-transitions of low lying hadrons are investigated. The following calculations are performed: 32 hadron masses are recomputed with a choice of bag parameters designed to give the correct values for the proton magnetic moment, μ/sub p/, and several masses, M/sub rho/ M/sub ω/ M/sub Δ/ M/sub Ω/, and M/sub D/; (2) eta, eta', eta/sub c/ mixing is computed in an untrustworthy approximation; and the widths for 38 M1-transitions are computed

  16. Recent work at MIT on uranium recovery from seawater

    International Nuclear Information System (INIS)

    Driscoll, M.J.

    1984-01-01

    Recent work at MIT has confirmed the superiority of fiber-form ion exchange media for uranium recovery from seawater, subject to demonstration of the ability to control fouling by suspended particulate matter. Calculations and laboratory experiments indicate loading rates of several hundred ppm U/day: an order of magnitude faster than for bead-type sorbers in fixed or fluidized beds. A high performance, modular, sorber cartridge/seawater contactor system capable of a lifetime-levelized cost of product in the range 100-150 $/1b U 3 O 8 has been designed. (author)

  17. DGMK conference 'Energetic utilisation and recycling of waste and biomass'. Authors' manuscripts; Beitraege zur DGMK-Fachbereichstagung 'Energetische und stoffliche Nutzung von Abfaellen und Biomassen'. Autorenmanuskripte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This conference of Deutsche Wissenschaftliche Gesellschaft fuer Erdoel, Erdgas und Kohle focused on energetic utilisation and recycling of waste materials and biomass, i.e. combustion, gasification and pyrolysis. Aspects of process control were gone into as well. [German] Die Fachbereichstagung der Deutschen Wissenschaftlichen Gesellschaft fuer Erdoel, Erdgas und Kohle beschaeftigte sich mit der energetischen und stofflichen Nutzung von Abfall und Biomasse. Verbrennung, Vergasung und Pyrolyse verschiedener Abfallstoffe sowie die Prozesssteuerung wurden eroertert.

  18. Helicobacter sp. MIT 01-6451 infection during fetal and neonatal life in laboratory mice.

    Science.gov (United States)

    Yamanaka, Hitoki; Nakanishi, Tai; Takagi, Toshikazu; Ohsawa, Makiko; Kubo, Noriaki; Yamamoto, Naoto; Takemoto, Takahira; Ohsawa, Kazutaka

    2015-01-01

    Helicobacter sp. MIT 01-6451 has been detected in SPF mice kept in Japan. To characterize strain MIT 01-6451, its infection route during fetal and neonatal life and effects on pregnancy were investigated using immunocompetent and immunodeficient mouse strains (BALB/c, C57BL/6, and SCID). MIT 01-6451 was detected in the uterus, vagina, and mammary glands of 50% of infected SCID mice, whereas these tissues were all negative in immunocompetent mice. No fetal infections with MIT 01-6451 were detected at 16-18 days after pregnancy in any mouse strain. In newborn mice, MIT 01-6451 was detected in intestinal tissue of C57BL/6 and SCID mice at 9-11 days after birth, but not in BALB/c mice. The IgA and IgG titers to MIT 01-6451 in sera of C57BL/6 female mice were significantly lower than those of BALB/c mice. Although no significant differences in the number of newborns per litter were observed between MIT 01-6451-infected and MIT 01-6451-free dams, the birth rate was lower in infected SCID mice than in control SCID mice. The present results indicated that MIT 01-6451 infects newborn mice after birth rather than by vertical transmission to the fetus via the placenta and that MIT 01-6451 infection shows opportunistically negative effects on the birth rate. In addition, the maternal immune response may affect infection of newborn mice with MIT 01-6451 through breast milk.

  19. Biomass pyrolysis for chemicals

    Energy Technology Data Exchange (ETDEWEB)

    De Wild, P.

    2011-07-15

    The problems associated with the use of fossil fuels demand a transition to renewable sources (sun, wind, water, geothermal, biomass) for materials and energy where biomass provides the only renewable source for chemicals. In a biorefinery, biomass is converted via different technologies into heat, power and various products. Here, pyrolysis (thermal degradation without added oxygen) of lignocellulosic biomass can play an important role, because it leads to an array of useful chemicals. Examples are furfural and acetic acid from hemicellulose, levoglucosan from cellulose and phenols and biochar from lignin. Since the three major biomass polymers hemicellulose, cellulose and lignin possess dissimilar thermal stabilities and reactivities, type and amount of degradation products are tunable by proper selection of the pyrolysis conditions. To determine if step-wise pyrolysis would be suitable for the production of chemicals, staged degasification of lignocellulosic biomass was studied. Due to limited yields, a hot pressurized water pre-treatment (aquathermolysis) followed by pyrolysis was subsequently developed as an improved version of a staged approach to produce furfural and levoglucosan from the carbohydrate fraction of the biomass. Lignin is the only renewable source for aromatic chemicals. Lignocellulosic biorefineries for bio-ethanol produce lignin as major by-product. The pyrolysis of side-streams into valuable chemicals is of prime importance for a profitable biorefinery. To determine the added-value of lignin side-streams other than their use as fuel for power, application research including techno-economic analysis is required. In this thesis, the pyrolytic valorisation of lignin into phenols and biochar was investigated and proven possible.

  20. Multicenter study of radiosynoviorthesis. Clinical outcome in osteoarthritis and other disorders with concomitant synovitis in comparison with rheumatoid arthritis; Multizenterstudie zur Radiosynoviorthese: Klinische Ergebnisse bei aktivierten Arthrosen und anderen Gelenkerkrankungen mit chronischer Synovialitis im Vergleich zur rheumatoiden Arthritis

    Energy Technology Data Exchange (ETDEWEB)

    Rau, H.; Lohmann, K.; Spitz, J. [Praxis fuer Nuklearmedizin, am Staedtischen Klinikum Wiesbaden (Germany); Franke, C. [Praxis fuer Nuklearmedizin, Hamburg (Germany); Goretzki, G. [Praxis fuer Nuklearmedizin, Bielefeld (Germany); Lemb, M.A. [Praxis fuer Nuklearmedizin, Bremen (Germany); Mueller, J. [Klinik fuer Nuklearmedizin, Kantonspital St. Gallen (Switzerland); Panholzer, P.J. [Abt. fuer Nuklearmedizin und Endokrinologie, PET-Zentrum, Krankenhaus der Barmherzigen Schwestern, Linz (Austria); Stelling, E. [Praxis fuer diagnostische und therapeutische Nuklearmedizin, Berlin (Germany)

    2004-04-01

    Aim: evaluation of the effectiveness of radiosynoviorthesis (RSO) in osteoarthritis and other disorders with concomitant synovitis versus rheumatoid arthritis by means of a standardized questionnaire. Patients, methods: 803 RSO treatments were monitored in 691 patients by standardized questionnaires of 7 centers in 3 countries. Patients were assigned to 3 groups according to their age (20-40, 41-60, 61-80 years). Additionally, the data were analyzed separately for patients with rheumatoid arthritis (group A) and those with osteoarthritis, psoriasis arthritis, pigmental villonodular synovitis or persistent effusions after joint replacement (group B). Results: ameliorations of joint pain, swelling/effusion or flexibility were found in 80% of group A and 56% of group B (p <0.01). Quality of life improved in 78% of group A and 59% of group B (p <0.01). The response rate was similar for small- and large-sized joints in group A, but significantly higher for large-sized joints in group B (p <0.01). The positive effects on joint pain, swelling/effusion or flexibility lasted longer in group A (p <0.01). Repeated RSOs were as effective as initial ones. The clinical outcome was neither influenced by age, nor gender, nor transient immobilisation for 48 hours after RSO. Conclusion: although slightly more efficient in rheumatoid arthritis, RSO represents an effective treatment option also in osteoarthritis and other disorders with concomitant synovitis. (orig.) [German] Ziel: Effektivitaetsvergleich der Radiosynoviorthese (RSO) bei aktivierter Arthrose und anderen Gelenkerkrankungen mit chronischer Synovialitis versus rheumatoider Arthritis. Ueberpruefung der Eignung eines standardisierten Fragebogens fuer Multizenterstudien. Patienten, Methoden: Bei 691 Patienten wurden 803 RSO-Behandlungsverlaeufe von 7 Zentren in 3 Laendern mit Hilfe eines standardisierten Fragebogens erfasst. Die Patienten wurden 3 Alterskategorien (20-40, 41-60 und 61-80 Jahre) zugeordnet. Ausserdem wurden

  1. Successful closure of persistent oro-cutaneous fistulas by injection of autologous adipose-derived stem cells: a case report [Erfolgreiche Behandlung persistierender oro-kutaner Fisteln durch Injektion mit autologen Fettstammzellen: ein Fallbericht

    Directory of Open Access Journals (Sweden)

    Föll, D. A.

    2013-07-01

    , die bisher nur in wenigen Studien klinisch zum Einsatz kam. In diesem Fallbericht schildern wir die Anwendung von konzentrierten, autologen Stammzellen aus Fettgewebe, wodurch zwei oro-kutane Fisteln zur Abheilung gebracht werden konnten.Fallbeschreibung: Eine 57-jährige, immunsupprimierte Leber- und Nierentransplantatempfängerin stellte sich mit einem tiefen mandibulären Weichteildefekt vor. Dieser resultierte aus der radikalen Entfernung und Bestrahlung eines von der Zungenbasis ausgehenden Plattenepithelkarzinoms. Im postoperativen Verlauf der Defektrekonstruktion, die mit einem freien Lappen durchgeführt wurde, bildeten sich zwei oro-kutane Fisteln. Da eine operative Revision zu keiner Heilung der Fisteln führte, wurde der Entschluss gefasst, autologe Stammzellen aus Fettgewebe um die Fisteln herum einzubringen. Die Stammzellen wurden mit Hilfe des Cytori Celution Systems extrahiert und in der gleichen Sitzung appliziert. Im postoperativen Verlauf kam es nach 4 Wochen zum vollständigen Verschluss der beiden Fisteln und bis zum aktuellen Zeitpunkt (6 Monate postoperativ trat kein Rezidiv auf.Fazit: Nach unserem Wissen ist dies die erste erfolgreiche Applikation von konzentrierten Stammzellen aus Fettgewebe zur Behandlung von oro-kutanen Fisteln. Dieser Fall zeigt, wie innovative Stammzelltherapie in Kombination mit gut etablierten chirurgischen Methoden in besonderen Fällen eine sinnvolle Therapiestrategie darstellen kann.

  2. Evaluation of injuries of the upper cervical spine in a postmortem study with digital radiography, CT and MRI; Evaluation experimentell erzeugter Verletzungen der oberen Halswirbelsaeule mit digitaler Roentgentechnik, Computertomographie und Magnetresonanztomographie

    Energy Technology Data Exchange (ETDEWEB)

    Obenauer, S.; Herold, T.; Fischer, U.; Grabbe, E. [Goettingen Univ. (Germany). Abt. fuer Roentgendiagnostik; Fadjasch, G.; Saternus, K.S. [Goettingen Univ. (Germany). Abt. fuer Rechtsmedizin; Koebke, J. [Koeln Univ. (Germany). Anatomisches Inst.

    1999-12-01

    obere Halswirbelsaeulen-Praeparate wurden nach definiertem Rotationstrauma sowie nach Praeparation mittels digitaler Roentgentechnik (DIMA Soft P41, Fa. Feinfokus), mittels CT (CTi, High Speed, GE) in konventioneller und in Spiraltechnik (Kollimation 1 mm, Pitch 1.0) sowie mit Hilfe der MRT (Magnetom Vision Siemens) in 2D- und 3D-Technik untersucht. Ergebnisse: Die Praeparation zeigte 6 Wirbelkoerperfrakturen, 5 Densfrakturen, 1 Fraktur des vorderen Atlasbogens, 4 knoecherne Ausrisse an den okzipitalen Kondylen und 6 Laesionen der Ligg. alaria. Die digitale Praeparateradiographie dokumentierte alle Frakturen und die 4 knoechernen Ausrissfrakturen am Condylus occipitalis. In der CT konnten alle Frakturen und ligamentaeren Verletzungen erkannt werden. Die 2D MRT wies 9 Frakturen sicher und 3 fraglich nach; die 3D MRT zeigte 7 Frakturen sicher und 5 fraglich. Von den 4 Ausrissfrakturen konnten 2 mit der 2D MRT und 1 mit der 3D MRT nachgewiesen werden. Ligamentaere Verletzungen waren sicher in der 2D MRT in 2/6 Faellen und in der 3D MRT in 1 Fall zu erkennen. Diskussion: In postmortalen Studien zeigt die CT gegenueber der digitalen Radiographie und der MRT in der Detektion von Frakturen und ligamentaeren Verletzungen der oberen Halswirbelsaeule eine Ueberlegenheit, wobei diese Ergebnisse nur bedingt auf Patienten nach Hochgeschwindigkeitstrauma uebertragbar sind. (orig.)

  3. Biomass energy resource enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Grover, P D [Indian Institute of Technology, New Delhi (India)

    1995-12-01

    The demand for energy in developing countries is expected to increase to at least three times its present level within the next 25 years. If this demand is to be met by fossil fuels, an additional 2 billion tonnes of crude oil or 3 billion tonnes of coal would be needed every year. This consumption pattern, if allowed to proceed, would add 10 billion tonnes of CO{sub 2}, to the global atmosphere each year, with its attendant risk of global warming. Therefore, just for our survival, it is imperative to progressively replace fossil fuels by biomass energy resources and to enhance the efficiency of use of the latter. Biomass is not only environmentally benign but is also abundant. It is being photosynthesised at the rate of 200 billion tonnes of carbon every year, which is equivalent to 10 times the world`s present demand for energy. Presently, biomass energy resources are highly under-utilised in developing countries; when they are used it is through combustion, which is inefficient and causes widespread environmental pollution with its associated health hazards. Owing to the low bulk density and high moisture content of biomass, which make it difficult to collect, transport and store, as well as its ash-related thermochemical properties, its biodegradability and seasonal availability, the industrial use of biomass is limited to small and (some) medium-scale industries, most of which are unable to afford efficient but often costly energy conversion systems. Considering these constraints and the need to enhance the use base, biomass energy technologies appropriate to developing countries have been identified. Technologies such as briquetting and densification to upgrade biomass fuels are being adopted as conventional measures in some developing countries. The biomass energy base can be enhanced only once these technologies have been shown to be viable under local conditions and with local raw materials, after which they will multiply on their own, as has been the case

  4. Biomass energy resource enhancement

    International Nuclear Information System (INIS)

    Grover, P.D.

    1995-01-01

    The demand for energy in developing countries is expected to increase to at least three times its present level within the next 25 years. If this demand is to be met by fossil fuels, an additional 2 billion tonnes of crude oil or 3 billion tonnes of coal would be needed every year. This consumption pattern, if allowed to proceed, would add 10 billion tonnes of CO 2 , to the global atmosphere each year, with its attendant risk of global warming. Therefore, just for our survival, it is imperative to progressively replace fossil fuels by biomass energy resources and to enhance the efficiency of use of the latter. Biomass is not only environmentally benign but is also abundant. It is being photosynthesised at the rate of 200 billion tonnes of carbon every year, which is equivalent to 10 times the world's present demand for energy. Presently, biomass energy resources are highly under-utilised in developing countries; when they are used it is through combustion, which is inefficient and causes widespread environmental pollution with its associated health hazards. Owing to the low bulk density and high moisture content of biomass, which make it difficult to collect, transport and store, as well as its ash-related thermochemical properties, its biodegradability and seasonal availability, the industrial use of biomass is limited to small and (some) medium-scale industries, most of which are unable to afford efficient but often costly energy conversion systems. Considering these constraints and the need to enhance the use base, biomass energy technologies appropriate to developing countries have been identified. Technologies such as briquetting and densification to upgrade biomass fuels are being adopted as conventional measures in some developing countries. The biomass energy base can be enhanced only once these technologies have been shown to be viable under local conditions and with local raw materials, after which they will multiply on their own, as has been the case

  5. Material Identification Technology (MIT) concept technical feasibility study

    International Nuclear Information System (INIS)

    Jones, J.L.; Harker, Y.D.; Yoon, W.Y.; Johnson, L.O.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) has initiated the design and development of a novel pulsed accelerator-based, active interrogation concept. The proposed concept, referred to as the Material Identification Technology (MIT), enables rapid (between accelerator pulses), non-destructive, elemental composition analysis of both nuclear and non-nuclear materials. Applications of this technique include material monitoring in support of counter-proliferation activities, such as export controls (at domestic and international inspection locations), SNM controls, nuclear weapon dismantlement, and chemical weapon verification. Material Identification Technology combines a pulsed, X-ray source (an electron accelerator) and a gamma detection system. The accelerator must maximize neutron production (pulse width, beam current, beam energy, and repetition rate) and minimize photon dose to the object. Current available accelerator technology can meet these requirements. The detection system must include detectors which provide adequate gamma energy resolution capability, rapid recovery after the initial X-ray interrogation pulse, and multiple single gamma event detection between accelerator pulses. Further research is required to develop the detection system. This report provides the initial feasibility assessment of the MIT concept

  6. MIT nuclear reactor laboratory high school teaching program

    International Nuclear Information System (INIS)

    Olmez, I.

    1991-01-01

    For the last 6 years, the Massachusetts Institute of Technology (MIT) Nuclear Reactor Laboratory's academic and scientific staff a have been conducting evening seminars for precollege science teachers, parents, and high school students from the New England area. These seminars, as outlined in this paper, are intended to give general information on nuclear technologies with specific emphasis on radiation physics, nuclear medicine, nuclear chemistry, and ongoing research activities at the MIT research reactor. The ultimate goal is to create interest or build on the already existing interest in science and technology by, for example, special student projects. Several small projects have already been completed ranging from environmental research to biological reactions with direct student involvement. Another outcome of these seminars was the change in attitudes of science teachers toward nuclear technology. Numerous letters have been received from the teachers and parents stating their previous lack of knowledge on the beneficial aspects of nuclear technologies and the subsequent inclusion of programs in their curriculum for educating students so that they may also develop a more positive attitude toward nuclear power

  7. Status of the MIT-Bates South Hall Ring commissioning

    International Nuclear Information System (INIS)

    Flanz, J.B.; Jacobs, K.D.; McAllister, B.; Averill, R.; Bradley, S.; Carter, A.; Dow, K.; Farkondeh, M.; Ihloff, E.; Kowalski, S.

    1993-01-01

    The MIT-Bates South Hall Ring construction project is now nearly complete. At this time the Energy Compression System, the SHR Injection Line and the South Hall Ring itself are complete. The SHR Extraction Line is complete but has not been connected to the ring. Commissioning with beam of the completed beam lines has been started. The MIT-Bates South Hall Ring (SHR) is an electron storage ring used with the 1 GeV Bates electron accelerator to increase the effective duty factor and luminosity. A beam can be stored for use with an internal target, thus allowing for high duty factor, high luminosity experiments. External beams with high duty factor can be obtained using resonant extraction. The new systems associated with the SHR include the Energy Compression System (ECS), the Injection line, and the Extraction line. The authors have commissioned the ECS, the new injection line and the SHR without RF. This includes transporting beam, measuring beam phase space parameters using critical injection elements including a high voltage electrostatic septum, a fast beam kicker, and storing a beam in the SHR

  8. Solid biomass barometer 2011

    International Nuclear Information System (INIS)

    2012-01-01

    The winter of 2011 was exceptionally mild, even in Northern Europe, with unusually warm temperatures. As a result the demand for firewood and solid biomass fuel was low. The European Union's primary energy production from solid biomass contracted by 2.9% slipping to 78.8 Mtoe. The first 4 countries are Germany (11.690 Mtoe), France (9.223 Mtoe), Sweden (8.165 Mtoe) and Finland (7.476 Mtoe) and when the production is relative to the population the first 4 countries become: Finland (1.391 toe/inhab.), Sweden (0.867 toe/inhab.), Latvia (0.784 toe/inhab.) and Estonia (0.644 toe/inhab.). Solid biomass electricity production continued to grow, driven by the additional take-up of biomass co-firing, to reach 72.800 TWh at the end of 2011, it means +2.6% compared to 2010. The energy policy of various states concerning solid biomass is analyzed

  9. Burning of biomass waste

    International Nuclear Information System (INIS)

    Holm Christensen, B.; Evald, A.; Buelow, K.

    1997-01-01

    The amounts of waste wood from the Danish wood processing industry available for the energy market has been made. Furthermore a statement of residues based on biomass, including waste wood, used in 84 plants has been made. The 84 plants represent a large part of the group of purchasers of biomass. A list of biomass fuel types being used or being potential fuels in the future has been made. Conditions in design of plants of importance for the environmental impact and possibility of changing between different biomass fuels are illustrated through interview of the 84 plants. Emissions from firing with different types of residues based on biomass are illustrated by means of different investigations described in the literature of the composition of fuels, of measured emissions from small scale plants and full scale plants, and of mass balance investigations where all incoming and outgoing streams are analysed. An estimate of emissions from chosen fuels from the list of types of fuels is given. Of these fuels can be mentioned residues from particle board production with respectively 9% and 1% glue, wood pellets containing binding material with sulphur and residues from olive production. (LN)

  10. Mobile-IT Education (MIT.EDU): M-Learning Applications for Classroom Settings

    Science.gov (United States)

    Sung, M.; Gips, J.; Eagle, N.; Madan, A.; Caneel, R.; DeVaul, R.; Bonsen, J.; Pentland, A.

    2005-01-01

    In this paper, we describe the Mobile-IT Education (MIT.EDU) system, which demonstrates the potential of using a distributed mobile device architecture for rapid prototyping of wireless mobile multi-user applications for use in classroom settings. MIT.EDU is a stable, accessible system that combines inexpensive, commodity hardware, a flexible…

  11. MIT domain of Vps4 is a Ca2+-dependent phosphoinositide-binding domain.

    Science.gov (United States)

    Iwaya, Naoko; Takasu, Hirotoshi; Goda, Natsuko; Shirakawa, Masahiro; Tanaka, Toshiki; Hamada, Daizo; Hiroaki, Hidekazu

    2013-05-01

    The microtubule interacting and trafficking (MIT) domain is a small protein module that is conserved in proteins of diverged function, such as Vps4, spastin and sorting nexin 15 (SNX15). The molecular function of the MIT domain is protein-protein interaction, in which the domain recognizes peptides containing MIT-interacting motifs. Recently, we identified an evolutionarily related domain, 'variant' MIT domain at the N-terminal region of the microtubule severing enzyme katanin p60. We found that the domain was responsible for binding to microtubules and Ca(2+). Here, we have examined whether the authentic MIT domains also bind Ca(2+). We found that the loop between the first and second α-helices of the MIT domain binds a Ca(2+) ion. Furthermore, the MIT domains derived from Vps4b and SNX15a showed phosphoinositide-binding activities in a Ca(2+)-dependent manner. We propose that the MIT domain is a novel membrane-associating domain involved in endosomal trafficking.

  12. Scratch that: MIT's Mitchel Resnick Says Kids Should Do It for Themselves

    Science.gov (United States)

    Traylor, Scott

    2008-01-01

    Mitchel Resnick is a researcher, inventor, and professor at MIT's Media Laboratory in Cambridge, MA, and the founder of the Lifelong Kindergarten Group at MIT. He is the lead innovator behind many cutting-edge learning technologies and projects for children, including the Computer Clubhouse, PicoCrickets, and the wildly successful consumer…

  13. Assessing International Product Design and Development Graduate Courses: The MIT-Portugal Program

    Science.gov (United States)

    Dori, Yehudit Judy; Silva, Arlindo

    2010-01-01

    The Product Design and Development (PDD) course is part of the graduate curriculum in the Engineering Design and Advanced Manufacturing (EDAM) study in the MIT-Portugal Program. The research participants included about 110 students from MIT, EDAM, and two universities in Portugal, Instituto Superior Técnico-Universidade Técnica de Lisboa (IST) and…

  14. Analyse von Kunststoffadditiven mittels Laserablation gekoppelt mit induktiv gekoppelter Plasma Massenspektrometrie

    OpenAIRE

    Börno, Fabian

    2016-01-01

    Die Laserablation gekoppelt mit der Massenspektrometrie mit induktiv gekoppeltem Plasma ist eine vielversprechende direkte Feststofftechnik, die sich jedoch bei der Analyse von Kunststoffen wegen des Mangels an matrixangepassten zertifizierten Referenzmaterialien nicht durchsetzen konnte. Vorherige Arbeiten belegen polymerabhängige Abtragsraten. Das oft als interner Standard verwendete Intensitätssignal des Kohlenstoffisotopes 13C zur Korrektur dieser Unterschiede wird in der Literatur kritis...

  15. Der Entwurf einer Musterwohnung für ältere Menschen mit Demenz

    NARCIS (Netherlands)

    Joost van Hoof

    2014-01-01

    Einführung Ältere Menschen mit Demenz brauchen Wohnungen, die sowohl altersgemäß ausgestattet sind als auch die erforderliche Pflege im Haus anbieten. Traditionelle Änderungen und entsprechende Technologien bieten in erster Linie Lösungen für Personen mit eingeschränkter Mobilität. Dies bedeutet,

  16. Klinische Ergebnisse in der Behandlung der rezidivierenden respiratorischen Papillomatose mit Microdebrider, intraläsionaler Cidofovir-Injektion und Impfung mit Gardasil

    OpenAIRE

    Schäfer, Fabian Axel

    2013-01-01

    Die Rekurrierende Respiratorische Papillomatose (RRP) ist eine seltene Erkrankung, die Kinder, aber auch Erwachsene betrifft. Sie ist charakterisiert durch eine Proliferation benigner Plattenepithel-Papillome innerhalb des Aerodigestiv-Traktes mit dem Larynx als Prädilektionsstelle. Hervorgerufen wird die RRP durch eine orale Infektion mit Humanen Papillomviren (HPV) der Typen 6 oder 11. Bei aggressiven Verlaufsformen, die eine Vielzahl von Papillomabtragungen im Abstand von wenigen Monaten o...

  17. Biomass ash utilization

    Energy Technology Data Exchange (ETDEWEB)

    Bristol, D.R.; Noel, D.J.; O`Brien, B. [HYDRA-CO Operations, Inc., Syracuse, NY (United States); Parker, B. [US Energy Corp., Fort Fairfield, ME (United States)

    1993-12-31

    This paper demonstrates that with careful analysis of ash from multiple biomass and waste wood fired power plants that most of the ash can serve a useful purpose. Some applications require higher levels of consistency than others. Examples of ash spreading for agricultural purposes as a lime supplement for soil enhancement in Maine and North Carolina, as well as a roadbase material in Maine are discussed. Use of ash as a horticultural additive is explored, as well as in composting as a filtering media and as cover material for landfills. The ash utilization is evaluated in a framework of environmental responsibility, regulations, handling and cost. Depending on the chemical and physical properties of the biomass derived fly ash and bottom ash, it can be used in one or more applications. Developing a program that utilizes ash produced in biomass facilities is environmentally and socially sound and can be financially attractive.

  18. Biomass Deconstruction and Recalcitrance

    DEFF Research Database (Denmark)

    Zhang, Heng

    This thesis is about the use of an agricultural residue as a feedstock for fermentable sugars to be used for second generation (2G) bioethanol. The main focus of this thesis work is upon the recalcitrance of different anatomical fractions of wheat straw. Biomass recalcitrance is a collective...... of lignocellulosic biomass’ degradability, a high throughput screening (HTS) platform was developed for combined thermochemical pretreatment and enzymatic degradation in Copenhagen laboratory during this thesis work. The platform integrates an automatized biomass grinding and dispensing system, a pressurized heating...... system, a plate incubator and a high performance liquid chromatography (HPLC) system. In comparison with the reported HTS platforms, the Copenhagen platform is featured by the fully automatic biomass sample preparation system, the bench-scale hydrothermal pretreatment setup, and precise sugar measurement...

  19. Biomass co-firing

    DEFF Research Database (Denmark)

    Yin, Chungen

    2013-01-01

    Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized-bed combus......Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized......-bed combustion (FBC) systems, and grate-firing systems, which are employed in about 50%, 40% and 10% of all the co-firing plants, respectively. Their basic principles, process technologies, advantages, and limitations are presented, followed by a brief comparison of these technologies when applied to biomass co...

  20. YEAR 2 BIOMASS UTILIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Christopher J. Zygarlicke

    2004-11-01

    This Energy & Environmental Research Center (EERC) Year 2 Biomass Utilization Final Technical Report summarizes multiple projects in biopower or bioenergy, transportation biofuels, and bioproducts. A prototype of a novel advanced power system, termed the high-temperature air furnace (HITAF), was tested for performance while converting biomass and coal blends to energy. Three biomass fuels--wood residue or hog fuel, corn stover, and switchgrass--and Wyoming subbituminous coal were acquired for combustion tests in the 3-million-Btu/hr system. Blend levels were 20% biomass--80% coal on a heat basis. Hog fuel was prepared for the upcoming combustion test by air-drying and processing through a hammer mill and screen. A K-Tron biomass feeder capable of operating in both gravimetric and volumetric modes was selected as the HITAF feed system. Two oxide dispersion-strengthened (ODS) alloys that would be used in the HITAF high-temperature heat exchanger were tested for slag corrosion rates. An alumina layer formed on one particular alloy, which was more corrosion-resistant than a chromia layer that formed on the other alloy. Research activities were completed in the development of an atmospheric pressure, fluidized-bed pyrolysis-type system called the controlled spontaneous reactor (CSR), which is used to process and condition biomass. Tree trimmings were physically and chemically altered by the CSR process, resulting in a fuel that was very suitable for feeding into a coal combustion or gasification system with little or no feed system modifications required. Experimental procedures were successful for producing hydrogen from biomass using the bacteria Thermotoga, a deep-ocean thermal vent organism. Analytical procedures for hydrogen were evaluated, a gas chromatography (GC) method was derived for measuring hydrogen yields, and adaptation culturing and protocols for mutagenesis were initiated to better develop strains that can use biomass cellulose. Fly ash derived from

  1. Northeast Regional Biomass Program

    Energy Technology Data Exchange (ETDEWEB)

    O' Connell, R.A.

    1991-11-01

    The management structure and program objectives for the Northeast Regional Biomass Program (NRBP) remain unchanged from previous years. Additional funding was provided by the Bonneville Power Administration Regional Biomass Program to continue the publication of articles in the Biologue. The Western Area Power Administration and the Council of Great Lakes Governors funded the project Characterization of Emissions from Burning Woodwaste''. A grant for the ninth year was received from DOE. The Northeast Regional Biomass Steering Committee selected the following four projects for funding for the next fiscal year. (1) Wood Waste Utilization Conference, (2) Performance Evaluation of Wood Systems in Commercial Facilities, (3) Wood Energy Market Utilization Training, (4) Update of the Facility Directory.

  2. Northeast Regional Biomass Program

    International Nuclear Information System (INIS)

    O'Connell, R.A.

    1991-11-01

    The management structure and program objectives for the Northeast Regional Biomass Program (NRBP) remain unchanged from previous years. Additional funding was provided by the Bonneville Power Administration Regional Biomass Program to continue the publication of articles in the Biologue. The Western Area Power Administration and the Council of Great Lakes Governors funded the project ''Characterization of Emissions from Burning Woodwaste''. A grant for the ninth year was received from DOE. The Northeast Regional Biomass Steering Committee selected the following four projects for funding for the next fiscal year. (1) Wood Waste Utilization Conference, (2) Performance Evaluation of Wood Systems in Commercial Facilities, (3) Wood Energy Market Utilization Training, (4) Update of the Facility Directory

  3. Aerosols from biomass combustion

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T.

    2001-07-01

    This report is the proceedings of a seminar on biomass combustion and aerosol production organised jointly by the International Energy Agency's (IEA) Task 32 on bio energy and the Swiss Federal Office of Energy (SFOE). This collection of 16 papers discusses the production of aerosols and fine particles by the burning of biomass and their effects. Expert knowledge on the environmental impact of aerosols, formation mechanisms, measurement technologies, methods of analysis and measures to be taken to reduce such emissions is presented. The seminar, visited by 50 participants from 11 countries, shows, according to the authors, that the reduction of aerosol emissions resulting from biomass combustion will remain a challenge for the future.

  4. Parallelization Experience with Four Canonical Econometric Models Using ParMitISEM

    Directory of Open Access Journals (Sweden)

    Nalan Baştürk

    2016-03-01

    Full Text Available This paper presents the parallel computing implementation of the MitISEM algorithm, labeled Parallel MitISEM. The basic MitISEM algorithm provides an automatic and flexible method to approximate a non-elliptical target density using adaptive mixtures of Student-t densities, where only a kernel of the target density is required. The approximation can be used as a candidate density in Importance Sampling or Metropolis Hastings methods for Bayesian inference on model parameters and probabilities. We present and discuss four canonical econometric models using a Graphics Processing Unit and a multi-core Central Processing Unit version of the MitISEM algorithm. The results show that the parallelization of the MitISEM algorithm on Graphics Processing Units and multi-core Central Processing Units is straightforward and fast to program using MATLAB. Moreover the speed performance of the Graphics Processing Unit version is much higher than the Central Processing Unit one.

  5. Biomass living energy

    International Nuclear Information System (INIS)

    2005-01-01

    Any energy source originating from organic matter is biomass, which even today is the basic source of energy for more than a quarter of humanity. Best known for its combustible properties, biomass is also used to produce biofuels. This information sheet provides also information on the electricity storage from micro-condensers to hydroelectric dams, how to save energy facing the increasing of oil prices and supply uncertainties, the renewable energies initiatives of Cork (Ireland) and the Switzerland european energy hub. (A.L.B.)

  6. Biomass stoves in dwellings

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo

    and analyzed in this session. Experimental results regarding the performance of biomass combustion stoves and the effects of real-life practices in terms of thermal efficiency, particulate and gaseous emissions will be addressed. This research is based on the development of a new testing approach that combines...... laboratory and field measurements established in the context of the implications of the upcoming eco-design directive. The communication will cover technical aspects concerning the operating performance of different types of biomass stoves and building envelopes, in order to map the ongoing opportunities...

  7. Method for pretreating lignocellulosic biomass

    Science.gov (United States)

    Kuzhiyil, Najeeb M.; Brown, Robert C.; Dalluge, Dustin Lee

    2015-08-18

    The present invention relates to a method for pretreating lignocellulosic biomass containing alkali and/or alkaline earth metal (AAEM). The method comprises providing a lignocellulosic biomass containing AAEM; determining the amount of the AAEM present in the lignocellulosic biomass; identifying, based on said determining, the amount of a mineral acid sufficient to completely convert the AAEM in the lignocellulosic biomass to thermally-stable, catalytically-inert salts; and treating the lignocellulosic biomass with the identified amount of the mineral acid, wherein the treated lignocellulosic biomass contains thermally-stable, catalytically inert AAEM salts.

  8. [R]MIT Research Centre at Delft University of Technology: A Bridge between Research, Education, Society and Profession

    Science.gov (United States)

    Zijlstra, Hielkje

    2009-01-01

    In 2006, we launched the [R]MIT Research Centre (Modification, Intervention Transformation) at the Faculty of Architecture at Delft University of Technology. [R]MIT was founded to respond to the need for an integrated, multi-disciplinary approach to the transformation of the built environment. [R]MIT aims to bring momentum to the renewal of…

  9. Exploration of the crystalline underground by extension drilling of the Urach 3 well in the framework of a feasibility study for a hot dry rock demonstration project; Erkundung des kristallinen Untergrunds mit der Vertiefungsbohrung Urach 3 im Rahmen einer Machbarkeitsstudie fuer ein Hot-Dry-Rock-Demonstrationsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Tenzer, H [Stadtwerke Bad Urach (Germany); Genter, A; Hottin, A M [BRGM/GIG, Orleans (France)

    1997-12-01

    Temperaturen bis 147 C innerhalb Europas geschaffen. In einer zweiten Phase wurde 1982/83 das bestehende Bohrloch um 150 m auf 3488 m mit einer Temperatur von 147 C verlieft und ein Einbohrloch-Zirkulationssystem getestet. In einer dritten Phase wurden 1990-1996 im Rahmen einer Machbarkeitsstudie die ortsspezifischen Randbedingungen ermittelt und die Gesteinsparameter mit Hilfe einer Vertiefungsbohrung auf 4445 m fuer die Durchfuehrung eines Demonstrationsprojektes erkundet. Die Temperatur auf Bohrlochsohle der Vertiefungsbohrung in korrigierter vertikaler Teufe von 4394,72 m betraegt 170 C. Temperaturaufbaukurven lassen eine Maximaltemperatur von 175 C in 4500 m Teufe erwarten. Der Temperaturgradient im Kristallin betraegt gleichbleibend 2,9 K/100 m. Die Ergebnisse zeigen im Vergleich mit anderen Kristallin-Forschungsbohrungen, dass die Urach gewonnenen Erkenntisse auf den gesamten sueddeutschen und nordschweizerischen Raum uebertragbar sind und dass der Standort Urach in einem weitverbreiteten Spannungsfeld mit horizontaler strike-slip Tektonik und mit seinen vielen, nahe der Bohrung liegenden potentiellen Abnehmern geothermischer Energie (Industriebetriebe, Kurmitteleinrichtungen und Wohnhaeuser), gut fuer die Durchfuehrung eines Demonstrationsprojektes (Energieprojekt) geeignet ist. (orig./AKF)

  10. Gas generation from biomass for decentralized power supply systems; Gaserzeugung fuer dezentrale Energiesysteme auf der Basis von Biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Kubiak, H.; Papamichalis, A.; Heek, K.H. van [DMT-Inst. fuer Kokserzeugung und Brennstofftechnik, Essen (Germany)

    1996-12-31

    By a reaction with steam, bioresidues and plants can be converted into a gas consisting mainly of hydrogen, carbon monoxide and methane which can be used for electric power generation in gas engines, gas turbins and fuel cells. The conversion processes, especially the fuel cell process, are environment-friendly and efficient. For decentralized applications (i.e. for biomass volumes of 0.5 to 1 t/h), an allothermal process is recommended which is described in detail. (orig) [Deutsch] Durch Reaktion mit Wasserdampf lassen sich Bioreststoffe und Energiepflanzen zu einem Gas umsetzen, das im wesentlichen aus Wasserstoff, Kohlenmonoxid und Methan besteht und z.B. ueber Gasmotoren, Gasturbinen, vorzugsweise aber Brennstoffzellen zu Strom umgewandelt werden kann. Die Umwandlungsverfahren, insbesondere unter Benutzung von Brennstoffzellen, sind umweltfreundlich und haben einen hohen Wirkungsgrad. Als Vergasungsverfahren eignet sich fuer die dezentrale Anwendung. - d.h. fuer eine Biomassemenge von 0,5 bis 1 t/h - insbesondere das hier beschriebene allotherme Verfahren. (orig)

  11. Gas generation from biomass for decentralized power supply systems; Gaserzeugung fuer dezentrale Energiesysteme auf der Basis von Biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Kubiak, H; Papamichalis, A; Heek, K.H. van [DMT-Inst. fuer Kokserzeugung und Brennstofftechnik, Essen (Germany)

    1997-12-31

    By a reaction with steam, bioresidues and plants can be converted into a gas consisting mainly of hydrogen, carbon monoxide and methane which can be used for electric power generation in gas engines, gas turbins and fuel cells. The conversion processes, especially the fuel cell process, are environment-friendly and efficient. For decentralized applications (i.e. for biomass volumes of 0.5 to 1 t/h), an allothermal process is recommended which is described in detail. (orig) [Deutsch] Durch Reaktion mit Wasserdampf lassen sich Bioreststoffe und Energiepflanzen zu einem Gas umsetzen, das im wesentlichen aus Wasserstoff, Kohlenmonoxid und Methan besteht und z.B. ueber Gasmotoren, Gasturbinen, vorzugsweise aber Brennstoffzellen zu Strom umgewandelt werden kann. Die Umwandlungsverfahren, insbesondere unter Benutzung von Brennstoffzellen, sind umweltfreundlich und haben einen hohen Wirkungsgrad. Als Vergasungsverfahren eignet sich fuer die dezentrale Anwendung. - d.h. fuer eine Biomassemenge von 0,5 bis 1 t/h - insbesondere das hier beschriebene allotherme Verfahren. (orig)

  12. Biomass Conversion Factsheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-05

    To efficiently convert algae, diverse types of cellulosic biomass, and emerging feedstocks into renewable fuels, the U.S. Department of Energy (DOE) supports research, development, and demonstration of technologies. This research will help ensure that these renewable fuels are compatible with today’s vehicles and infrastructure.

  13. Energy from aquatic biomass

    International Nuclear Information System (INIS)

    Aresta, M.; Dibenedetto, A.

    2009-01-01

    Aquatic biomass is considered as a second (or third) generation option for the production of bio fuels. The best utilization for energy purposes is not its direct combustion. Several technologies are available for the extraction of compounds that may find application for the production of gaseous fuels (biogas, dihydrogen) or liquid fuels (ethanol, bio oil, biodiesel). [it

  14. Activated carbon from biomass

    Science.gov (United States)

    Manocha, S.; Manocha, L. M.; Joshi, Parth; Patel, Bhavesh; Dangi, Gaurav; Verma, Narendra

    2013-06-01

    Activated carbon are unique and versatile adsorbents having extended surface area, micro porous structure, universal adsorption effect, high adsorption capacity and high degree of surface reactivity. Activated carbons are synthesized from variety of materials. Most commonly used on a commercial scale are cellulosic based precursors such as peat, coal, lignite wood and coconut shell. Variation occurs in precursors in terms of structure and carbon content. Coir having very low bulk density and porous structure is found to be one of the valuable raw materials for the production of highly porous activated carbon and other important factor is its high carbon content. Exploration of good low cost and non conventional adsorbent may contribute to the sustainability of the environment and offer promising benefits for the commercial purpose in future. Carbonization of biomass was carried out in a horizontal muffle furnace. Both carbonization and activation were performed in inert nitrogen atmosphere in one step to enhance the surface area and to develop interconnecting porosity. The types of biomass as well as the activation conditions determine the properties and the yield of activated carbon. Activated carbon produced from biomass is cost effective as it is easily available as a waste biomass. Activated carbon produced by combination of chemical and physical activation has higher surface area of 2442 m2/gm compared to that produced by physical activation (1365 m2/gm).

  15. Pyrolysis of chitin biomass

    DEFF Research Database (Denmark)

    Qiao, Yan; Chen, Shuai; Liu, Ying

    2015-01-01

    The thermal degradation of chitin biomass with various molecular structures was investigated by thermogravimetric analysis (TG), and the gaseous products were analyzed by connected mass spectroscopy (MS). The chemical structure and morphology of char residues collected at 750°C using the model...

  16. The UK biomass industry

    International Nuclear Information System (INIS)

    Billins, P.

    1998-01-01

    A brief review is given of the development of the biomass industry in the UK. Topics covered include poultry litter generation of electricity, gasification plants fuelled by short-rotation coppice, on-farm anaerobic digestion and specialized combustion systems, e.g. straw, wood and other agricultural wastes. (UK)

  17. Catalytic Gasification of Lignocellulosic Biomass

    NARCIS (Netherlands)

    Chodimella, Pramod; Seshan, Kulathuiyer; Schlaf, Marcel; Zhang, Z. Conrad

    2015-01-01

    Gasification of lignocellulosic biomass has attracted substantial current research interest. Various possible routes to convert biomass to fuels have been explored. In the present chapter, an overview of the gasification processes and their possible products are discussed. Gasification of solid

  18. Biomass Feedstock National User Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Bioenergy research at the Biomass Feedstock National User Facility (BFNUF) is focused on creating commodity-scale feed-stocks from native biomass that meet the needs...

  19. Entrained Flow Gasification of Biomass

    DEFF Research Database (Denmark)

    Qin, Ke

    The present Ph. D. thesis describes experimental and modeling investigations on entrained flow gasification of biomass and an experimental investigation on entrained flow cogasification of biomass and coal. A review of the current knowledge of biomass entrained flow gasification is presented....... Biomass gasification experiments were performed in a laboratory-scale atmospheric pressure entrained flow reactor with the aim to investigate the effects of operating parameters and biomass types on syngas products. A wide range of operating parameters was involved: reactor temperature, steam/carbon ratio......, excess air ratio, oxygen concentration, feeder gas flow, and residence time. Wood, straw, and lignin were used as biomass fuels. In general, the carbon conversion was higher than 90 % in the biomass gasification experiments conducted at high temperatures (> 1200 °C). The biomass carbon...

  20. Enzymes for improved biomass conversion

    Science.gov (United States)

    Brunecky, Roman; Himmel, Michael E.

    2016-02-02

    Disclosed herein are enzymes and combinations of the enzymes useful for the hydrolysis of cellulose and the conversion of biomass. Methods of degrading cellulose and biomass using enzymes and cocktails of enzymes are also disclosed.

  1. Carbon Fiber from Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Milbrandt, Anelia [Clean Energy Manufacturing Analysis Center, Godlen, CO (United States); Booth, Samuel [Clean Energy Manufacturing Analysis Center, Godlen, CO (United States)

    2016-09-01

    Carbon fiber (CF), known also as graphite fiber, is a lightweight, strong, and flexible material used in both structural (load-bearing) and non-structural applications (e.g., thermal insulation). The high cost of precursors (the starting material used to make CF, which comes predominately from fossil sources) and manufacturing have kept CF a niche market with applications limited mostly to high-performance structural materials (e.g., aerospace). Alternative precursors to reduce CF cost and dependence on fossil sources have been investigated over the years, including biomass-derived precursors such as rayon, lignin, glycerol, and lignocellulosic sugars. The purpose of this study is to provide a comprehensive overview of CF precursors from biomass and their market potential. We examine the potential CF production from these precursors, the state of technology and applications, and the production cost (when data are available). We discuss their advantages and limitations. We also discuss the physical properties of biomass-based CF, and we compare them to those of polyacrylonitrile (PAN)-based CF. We also discuss manufacturing and end-product considerations for bio-based CF, as well as considerations for plant siting and biomass feedstock logistics, feedstock competition, and risk mitigation strategies. The main contribution of this study is that it provides detailed technical and market information about each bio-based CF precursor in one document while other studies focus on one precursor at a time or a particular topic (e.g., processing). Thus, this publication allows for a comprehensive view of the CF potential from all biomass sources and serves as a reference for both novice and experienced professionals interested in CF production from alternative sources.

  2. Predicting material failure using mathematics; Mit Mathematik Materialversagen vorhersagen

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Christian [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2016-06-15

    Numerical simulations provide insights into materials, technical procedures or processes that are hardly possible by means of measurement technology, or require a lot of effort. In BAM's ConDrop research project (Numerical Drop Test Analyses of Steel Sheet Containers for the Konrad Repository), scientists are developing a method to predict the deformation and failure behaviour of containers for low- and intermediate- level radioactive waste for the Konrad repository. [German] Numerische Simulationen erlauben Einblicke in Materialien, technische Verfahren oder Prozesse, die mit Mitteln der Messtechnik kaum oder nur unter grossem Aufwand moeglich sind. Im BAM-Forschungsvorhaben ConDrop entwickeln Wissenschaftlerinnen und Wissenschaftler damit eine Methode, um das Verformungs- und Versagensverhalten von Behaeltern fuer schwach- und mittelradioaktive Abfaelle fuer das Endlager Konrad vorherzusagen.

  3. Operating experience with innovative environmental technologies; Betriebserfahrungen mit innovativen Umwelttechnologien

    Energy Technology Data Exchange (ETDEWEB)

    Spindler, H.; Bauermeister, U.; Kliche, H.; Seiffarth, K. (comps.)

    2000-03-01

    The MUT '99 (Merseburger Umwelt-Tag) discussed modern processes, technologies and plants for treatment and utilisation of waste. The conference was attended by industrial organisations and scientific institutions. [German] Der 9. Merseburger Umwelt-Tag MUT '99 steht unter dem Motto 'Betriebserfahrungen mit innovativen Umwelttechnologien - Moderne wirtschaftliche Verfahren, Technologien und Anlagen zur Behandlung/Verwertung nichtvermeidbaren Abfalls', wobei der Begriff 'Abfall' sich letztlich auf alle Umweltmedien bezieht. Entsprechend dem Motto dieser Tagung stellen Unternehmen, Betriebe und wissenschaftliche Einrichtungen ihre Erfahrungen auf dem Gebiet der Umwelttechnologien vor, um Entwicklungen auf diesem Gebiet einer breiten Diskussion zu eroeffnen. Dabei soll es insbesondere um die Behandlung nicht vermeidbarer Abfaelle und Abwaesser gehen. (orig.)

  4. LLIMAS: Revolutionizing integrating modeling and analysis at MIT Lincoln Laboratory

    Science.gov (United States)

    Doyle, Keith B.; Stoeckel, Gerhard P.; Rey, Justin J.; Bury, Mark E.

    2017-08-01

    MIT Lincoln Laboratory's Integrated Modeling and Analysis Software (LLIMAS) enables the development of novel engineering solutions for advanced prototype systems through unique insights into engineering performance and interdisciplinary behavior to meet challenging size, weight, power, environmental, and performance requirements. LLIMAS is a multidisciplinary design optimization tool that wraps numerical optimization algorithms around an integrated framework of structural, thermal, optical, stray light, and computational fluid dynamics analysis capabilities. LLIMAS software is highly extensible and has developed organically across a variety of technologies including laser communications, directed energy, photometric detectors, chemical sensing, laser radar, and imaging systems. The custom software architecture leverages the capabilities of existing industry standard commercial software and supports the incorporation of internally developed tools. Recent advances in LLIMAS's Structural-Thermal-Optical Performance (STOP), aeromechanical, and aero-optical capabilities as applied to Lincoln prototypes are presented.

  5. Mitä uutta Oulun ravintolatarjontaan? : markkinatutkimus uutta ravintolaa ajatellen

    OpenAIRE

    Korhonen, Kerttu

    2014-01-01

    Tämä opinnäytetyö käsittelee Oulun alueelle tehtävää markkinatutkimusta nuorten ravintolakäyttäytymisestä ja – toiveista. Tutkimuskysymys kuuluu: ”Millaista uutta ravintolaa nuoret kaipaavat Oulun ravintolamaailmaan?”. Tutkimus on tehty ajatellen uuden ravintolan perustamista. Markkinatutkimuksella selvitetään opiskelevien nuorten toiveita siitä, mitä hyvä ravintola pitää sisällään. Tutkimuksen avulla selvitetään myös kuinka paljon nuoret käyttävät rahaa ravintolakäynneillään sekä sitä, kuink...

  6. Plattenepithelkarzinom in Verbindung mit einer roten Tätowierung.

    Science.gov (United States)

    Schmitz, Inge; Prymak, Oleg; Epple, Matthias; Ernert, Carsten; Tannapfel, Andrea

    2016-06-01

    Obwohl Tätowierungen in den letzten Jahren außerordentlich beliebt geworden sind, wurde in der Literatur bisher nur über wenige Fälle schwerer Reaktionen berichtet, die zu einer malignen Transformation führten. Dies steht im Kontrast zu der praktisch unüberschaubaren Zahl an Tätowierungen weltweit. Die Zusammensetzung der für Tätowierungen verwendeten Farbstoffe variiert stark, und selbst gleiche Farbtöne können unterschiedliche Komponenten enthalten. Das Ziel unserer Studie war es zu untersuchen, auf welche Weise Tätowierungen möglicherweise Hautkrebs auslösen können. Wir berichten über den seltenen Fall einer 24-jährigen Frau, bei der sich sieben Monate nachdem sie eine Tätowierung auf dem Fußrücken erhalten hatte in unmittelbarer Nähe des verwendeten roten Farbstoffs ein Plattenepithelkarzinom entwickelte. Die Komplikationen begannen mit einer unspezifischen Schwellung. Die Läsion wurde histologisch untersucht. Die Zusammensetzung des inkorporierten Farbstoffs wurde mittels Rasterelektronenmikroskopie in Kombination mit energiedispersiver Elementanalyse analysiert. Zur weiteren Charakterisierung wurden Thermogravimetrie und Pulverdiffraktometrie eingesetzt. Der Tätowierungsfarbstoff enthielt hauptsächlich Bariumsulfat; Spuren von Al, S, Ti, P, Mg und Cl ließen sich ebenfalls nachweisen. Bei der Analyse zeigten sich Pigmentgranula unterschiedlicher Größe. In seltenen Fällen kann Tätowierungstinte karzinogene Effekte haben, die multifaktoriell zu sein scheinen. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  7. MiT family translocation renal cell carcinoma.

    Science.gov (United States)

    Argani, Pedram

    2015-03-01

    The MiT subfamily of transcription factors includes TFE3, TFEB, TFC, and MiTF. Gene fusions involving two of these transcription factors have been identified in renal cell carcinoma (RCC). The Xp11 translocation RCCs were first officially recognized in the 2004 WHO renal tumor classification, and harbor gene fusions involving TFE3. The t(6;11) RCCs harbor a specific Alpha-TFEB gene fusion and were first officially recognized in the 2013 International Society of Urologic Pathology (ISUP) Vancouver classification of renal neoplasia. These two subtypes of translocation RCC have many similarities. Both were initially described in and disproportionately involve young patients, though adult translocation RCC may overall outnumber pediatric cases. Both often have unusual and distinctive morphologies; the Xp11 translocation RCCs frequently have clear cells with papillary architecture and abundant psammomatous bodies, while the t(6;11) RCCs frequently have a biphasic appearance with both large and small epithelioid cells and nodules of basement membrane material. However, the morphology of these two neoplasms can overlap, with one mimicking the other. Both of these RCCs underexpress epithelial immunohistochemical markers like cytokeratin and epithelial membrane antigen (EMA) relative to most other RCCs. Unlike other RCCs, both frequently express the cysteine protease cathepsin k and often express melanocytic markers like HMB45 and Melan A. Finally, TFE3 and TFEB have overlapping functional activity as these two transcription factors frequently heterodimerize and bind to the same targets. Therefore, on the basis of clinical, morphologic, immunohistochemical, and genetic similarities, the 2013 ISUP Vancouver classification of renal neoplasia grouped these two neoplasms together under the heading of "MiT family translocation RCC." This review summarizes our current knowledge of these recently described RCCs. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. Pathophysiologie des Kollagenstoffwechsels bei Patienten mit Induratio penis plastica (IPP

    Directory of Open Access Journals (Sweden)

    Lahme S

    2000-01-01

    Full Text Available Die Pathogenese der IPP ist bis heute nicht geklärt. Histopathologische Untersuchungen zeigen, daß der Kollagenstoffwechsel eine Rolle spielt. Dies veranlaßte uns zur genauen Analyse der Kollagenstoffwechselparameter bei IPP. Bei 11 Patienten mit IPP und 11 Kontrollpersonen wurden Kollagenstoffwechselparameter (Prokollagen III [PIIIP], PMN-Elastase [PMN-E], Fibronektin [FN], Fibronektinrezeptor [FN-R] und alpha1-Proteinase-Inhibitor [alpha1-PI] im cavernösen und peripheren Blut bestimmt. PMN-E, PIIIP, FN und FN-R waren in den beiden Untersuchungsgruppen nicht unterschiedlich. Die peripher venösen unterschieden sich nicht von den cavernösen Blutproben. Sowohl im peripher venös (158,55 mg/dl als auch im cavernös entnommenen Blut (168,29 mg/dl war die Konzentration des a1-PI signifikant niedriger als in der Kontrollgruppe (214,82 mg/dl. An einem zweiten Kollektiv von 23 Patienten wurden Analysen des Phänotyps für alpha1-PI im Hinblick auf das Vorliegen von genetisch determinierten Mangelallelen vorgenommen. Hier zeigte sich kein signifikanter Unterschied zu einem Kontrollkollektiv von 19 gesunden Probanden. Die alpha1-PI Erniedrigung der IPP-Patienten ist signifikant und liegt unterhalb des Normalwertbereichs für die gesunde Population. Ein Mangel an alpha1-PI kann zur Aktivitätserhöhung der Proteasen und zum Umbau des Kollagengewebes führen. Möglicherweise kommt es zusammen mit einem lokal wirksamen Einflußfaktor schließlich zur dystrophen Kalzifikation. Die humangenetischen Untersuchungen sprechen nicht für eine genetische Determinierung des alpha1-PI-Mangels, sondern legen eine erworbene hepatische Störung nahe.

  9. Romania biomass energy. Country study

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, M; Easterly, J L; Mark, P E; Keller, A [DynCorp, Alexandria, VA (United States)

    1995-12-01

    The present report was prepared under contract to UNIDO to conduct a case study of biomass energy use and potential in Romania. The purpose of the case study is to provide a specific example of biomass energy issues and potential in the context of the economic transition under way in eastern Europe. The transition of Romania to a market economy is proceeding at a somewhat slower pace than in other countries of eastern Europe. Unfortunately, the former regime forced the use of biomass energy with inadequate technology and infrastructure, particularly in rural areas. The resulting poor performance thus severely damaged the reputation of biomass energy in Romania as a viable, reliable resource. Today, efforts to rejuvenate biomass energy and tap into its multiple benefits are proving challenging. Several sound biomass energy development strategies were identified through the case study, on the basis of estimates of availability and current use of biomass resources; suggestions for enhancing potential biomass energy resources; an overview of appropriate conversion technologies and markets for biomass in Romania; and estimates of the economic and environmental impacts of the utilization of biomass energy. Finally, optimal strategies for near-, medium- and long-term biomass energy development, as well as observations and recommendations concerning policy, legislative and institutional issues affecting the development of biomass energy in Romania are presented. The most promising near-term biomass energy options include the use of biomass in district heating systems; cofiring of biomass in existing coal-fired power plants or combined heat and power plants; and using co-generation systems in thriving industries to optimize the efficient use of biomass resources. Mid-term and long-term opportunities include improving the efficiency of wood stoves used for cooking and heating in rural areas; repairing the reputation of biogasification to take advantage of livestock wastes

  10. Romania biomass energy. Country study

    International Nuclear Information System (INIS)

    Burnham, M.; Easterly, J.L.; Mark, P.E.; Keller, A.

    1995-01-01

    The present report was prepared under contract to UNIDO to conduct a case study of biomass energy use and potential in Romania. The purpose of the case study is to provide a specific example of biomass energy issues and potential in the context of the economic transition under way in eastern Europe. The transition of Romania to a market economy is proceeding at a somewhat slower pace than in other countries of eastern Europe. Unfortunately, the former regime forced the use of biomass energy with inadequate technology and infrastructure, particularly in rural areas. The resulting poor performance thus severely damaged the reputation of biomass energy in Romania as a viable, reliable resource. Today, efforts to rejuvenate biomass energy and tap into its multiple benefits are proving challenging. Several sound biomass energy development strategies were identified through the case study, on the basis of estimates of availability and current use of biomass resources; suggestions for enhancing potential biomass energy resources; an overview of appropriate conversion technologies and markets for biomass in Romania; and estimates of the economic and environmental impacts of the utilization of biomass energy. Finally, optimal strategies for near-, medium- and long-term biomass energy development, as well as observations and recommendations concerning policy, legislative and institutional issues affecting the development of biomass energy in Romania are presented. The most promising near-term biomass energy options include the use of biomass in district heating systems; cofiring of biomass in existing coal-fired power plants or combined heat and power plants; and using co-generation systems in thriving industries to optimize the efficient use of biomass resources. Mid-term and long-term opportunities include improving the efficiency of wood stoves used for cooking and heating in rural areas; repairing the reputation of biogasification to take advantage of livestock wastes

  11. Biomass gasification in the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Van der Drift, A. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

    2013-07-15

    This reports summarizes the activities, industries, and plants on biomass gasification in the Netherlands. Most of the initiatives somehow relate to waste streams, rather than clean biomass, which may seem logic for a densely populated country as the Netherlands. Furthermore, there is an increasing interest for the production of SNG (Substitute Natural Gas) from biomass, both from governments and industry.

  12. Multi-functional biomass systems

    NARCIS (Netherlands)

    Dornburg, Veronika

    2004-01-01

    Biomass can play a role in mitigating greenhouse gas emissions by substituting conventional materials and supplying biomass based fuels. Main reason for the low share of biomass applications in Europe is their often-high production costs, among others due to the relatively low availability of

  13. Rekonstruktion mit Netz beim komplexen Prolaps der Frau: Was hilft es der Patientin wirklich?

    Directory of Open Access Journals (Sweden)

    Hierl J

    2010-01-01

    Full Text Available Einleitung: Der komplexe Genitaldeszensus der Frau geht oftmals mit einer deutlichen Einschränkung der Lebensqualität (LQ einher. Dennoch ist der Endpunkt der meisten klinischen Analysen rein anatomischer und funktioneller Natur. In der vorliegenden Untersuchung wurden die Einflüsse der operativen Rekonstruktion mit einem Netz prospektiv auf die LQ evaluiert. Patienten und Methoden: Bei insgesamt 111 Patientinnen mit Deszensus erfolgte zwischen 08/2005 und 12/2007 eine operative Versorgung mittels vaginaler Netzeinlage (anteriorer bzw. kompletter Mesh-Repair. Die LQ wurde prospektiv prä- und postoperativ anhand standardisierter LQ-Fragebögen erfasst. Ergebnisse: Präoperativ zeigte sich bei den Patientinnen eine signifikant reduzierte LQ gegenüber einem Normalkollektiv (p 0,01. Bei 7 % der Patientinnen mit anteriorem, und bei 11 % mit komplettem Mesh-Repair lag postoperativ kein adäquates klinisches Ergebnis vor. In diesem Kollektiv zeigte sich kein signifikanter Unterschied in den LQ-Tests prä- und postoperativ. Bei gutem postoperativem Ergebnis zeigte sich in der Gruppe mit anteriorer Netzeinlage lediglich bei 45 % (p = 0,021, bei kompletter Netzeinlage nur bei 31 % (p = 0,041 eine signifikant verbesserte LQ. Bei kleiner Fallzahl und kurzem Nachbeobachtungszeitraum kann eine gültige Aussage bezüglich der LQ nach Deszensuschirurgie mit Netzeinlage jedoch noch nicht getroffen werden.

  14. Evaluation of the MIT RMID 1000 system for the identification of Listeria species.

    Science.gov (United States)

    Ricardi, John; Haavig, David; Cruz, Lasaunta; Paoli, George; Gehring, Andrew

    2010-01-01

    The Micro Imaging Technology (MIT) 1000 Rapid Microbial Identification (RMID) System is a device that uses the principles of light scattering coupled with proprietary algorithms to identify bacteria after being cultured and placed in a vial of filtered water. This specific method is for pure culture identification of Listeria spp. A total of 81 microorganisms (55 isolates) were tested by the MIT 1000 System, of which 25 were Listeria spp. and 30 a variety of other bacterial species. In addition, a total of 406 tests over seven different ruggedness parameters were tested by the MIT 1000 System to determine its flexibility to the specifications stated in the MIT 1000 System User Guide in areas where they might be deviated by a user to shorten the test cycle. Overall, MIT concluded that the MIT 1000 System had an accuracy performance that should certify this Performance Test Method for the identification of Listeria spp. This report discusses the tests performed, results achieved, and conclusions, along with several reference documents to enable a higher understanding of the technology used by the MIT 1000 System.

  15. Biomass Compositional Analysis Laboratory Procedures | Bioenergy | NREL

    Science.gov (United States)

    Biomass Compositional Analysis Laboratory Procedures Biomass Compositional Analysis Laboratory Procedures NREL develops laboratory analytical procedures (LAPs) for standard biomass analysis. These procedures help scientists and analysts understand more about the chemical composition of raw biomass

  16. Biomass Data | Geospatial Data Science | NREL

    Science.gov (United States)

    Biomass Data Biomass Data These datasets detail the biomass resources available in the United Coverage File Last Updated Metadata Biomethane Zip 72.2 MB 10/30/2014 Biomethane.xml Solid Biomass Zip 69.5

  17. Biomass torrefaction: A promising pretreatment technology for biomass utilization

    Science.gov (United States)

    Chen, ZhiWen; Wang, Mingfeng; Ren, Yongzhi; Jiang, Enchen; Jiang, Yang; Li, Weizhen

    2018-02-01

    Torrefaction is an emerging technology also called mild pyrolysis, which has been explored for the pretreatment of biomass to make the biomass more favorable for further utilization. Dry torrefaction (DT) is a pretreatment of biomass in the absence of oxygen under atmospheric pressure and in a temperature range of 200-300 degrees C, while wet torrrefaction (WT) is a method in hydrothermal or hot and high pressure water at the tempertures within 180-260 degrees C. Torrrefied biomass is hydrophobic, with lower moisture contents, increased energy density and higher heating value, which are more comparable to the characteristics of coal. With the improvement in the properties, torrefied biomass mainly has three potential applications: combustion or co-firing, pelletization and gasification. Generally, the torrefaction technology can accelerate the development of biomass utilization technology and finally realize the maximum applications of biomass energy.

  18. High Pressure Biomass Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Pradeep K [Georgia Tech Research Corporation, Atlanta, GA (United States)

    2016-07-29

    According to the Billion Ton Report, the U.S. has a large supply of biomass available that can supplement fossil fuels for producing chemicals and transportation fuels. Agricultural waste, forest residue, and energy crops offer potential benefits: renewable feedstock, zero to low CO2 emissions depending on the specific source, and domestic supply availability. Biomass can be converted into chemicals and fuels using one of several approaches: (i) biological platform converts corn into ethanol by using depolymerization of cellulose to form sugars followed by fermentation, (ii) low-temperature pyrolysis to obtain bio-oils which must be treated to reduce oxygen content via HDO hydrodeoxygenation), and (iii) high temperature pyrolysis to produce syngas (CO + H2). This last approach consists of producing syngas using the thermal platform which can be used to produce a variety of chemicals and fuels. The goal of this project was to develop an improved understanding of the gasification of biomass at high pressure conditions and how various gasification parameters might affect the gasification behavior. Since most downstream applications of synags conversion (e.g., alcohol synthesis, Fischer-Tropsch synthesis etc) involve utilizing high pressure catalytic processes, there is an interest in carrying out the biomass gasification at high pressure which can potentially reduce the gasifier size and subsequent downstream cleaning processes. It is traditionally accepted that high pressure should increase the gasification rates (kinetic effect). There is also precedence from coal gasification literature from the 1970s that high pressure gasification would be a beneficial route to consider. Traditional approach of using thermogravimetric analyzer (TGA) or high-pressure themogravimetric analyzer (PTGA) worked well in understanding the gasification kinetics of coal gasification which was useful in designing high pressure coal gasification processes. However

  19. Gebrauch von Komplementärmedizin bei Patienten mit metastasierendem Melanom unter Therapie mit Ipilimumab innerhalb einer klinischen Studie.

    Science.gov (United States)

    Huebner, Jutta; Mohr, Peter; Simon, Jan-Christoph; Fluck, Michael; Berking, Carola; Zimmer, Lisa; Loquai, Carmen

    2016-05-01

    In Deutschland wenden 40-90 % aller Krebspatienten Methoden der komplementären and alternativen Medizin (KAM) an. Bis dato gibt es kein Datenmaterial zum Einsatz der KAM bei Melanompatienten. Das Ziel unserer Studie war es, Daten über den Gebrauch, die Informationsquellen und Ziele von Patienten mit metastasierendem Melanom zu erfassen. Einhundertsechsundfünfzig Patienten aus 25 Studienzentren nahmen an der DecOG-MM-PAL Multibasket Studie teil. Die beteiligten Personen wurden auch gebeten, an einer Nebenstudie teilzunehmen, die ihren Gebrauch von KAM erfassen sollte. Dazu wurde während der Behandlung ein standardisierter Fragebogen zu genau festgelegten Zeitpunkten ausgeteilt. Insgesamt gingen 55 Fragebögen von 32 (21 %) Melanompatienten ein. Von diesen gaben 17 (53 %) ein Interesse an KAM an, und sieben (22 %) machten von KAM Gebrauch. Die Hauptinformationsquellen (31 %) waren Familienmitglieder und Freunde, gefolgt von Ärzten (19 %). Die Hauptgründe für die Anwendung von KAM waren die Stärkung des Immunsystems (41 %) und des Körpers (34 %). Nahrungsergänzungsmittel (Vitamine und Spurenelemente) wurden am häufigsten angewendet (28 %). Eine relativ hohe Anzahl an Patienten mit metastasierendem Melanom machte trotz Teilnahme an einer klinischen Studie von KAM Gebrauch. Wechselwirkungen könnten durch biologisch basierte KAM auftreten, und hier besonders bei immunmodulierenden KAM- Strategien. Um Risiken zu vermeiden, sollte die Kommunikation zwischen den Ärzten und den Patienten verbessert werden. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  20. Skiing and snowboarding center at Bottrop; Mit Ski oder Snowboard runter von der Halde

    Energy Technology Data Exchange (ETDEWEB)

    Matthesius, M. [Lenze GmbH und Co KG, Hameln (Germany)

    2001-09-01

    The 'Alpincenter' at Bottrop is the biggest indoor winter sports center of the world. Its ventilation systems were equipped with specially selected frequency inverters. [German] Skifahren im Hochsommer? Mit dem Snowboard im Ruhrgebiet den Hang hinunter? Beste Wintersportverhaeltnisse an 365 Tagen im Jahr? Und das in Deutschland? Kein Problem. Seit Anfang des Jahres kommen in Bottrop Wintersportfreunde voll auf ihre Kosten. Nach einem halben Jahr Bauzeit hat das Alpincenter seine Pforten geoeffnet. Die Wintersporthalle ist die laengste Anlage auf der Welt. Die gesamte Belueftung wurde mit speziell auf die Klimatechnik (mit Drehzahl geregelten Ventilatoren) abgestimmten Frequenzumrichtern ausgeruestet. (orig./AKF)

  1. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2006-01-01

    The European (EU 25) wish to substitute solid biomass origin energy consumption (principally wood and wood waste, but also straw, crop harvest residues, vegetal and animal waste) for a part of that of fossil fuel origin (petrol, gas and coal) is beginning to pay off. 58,7 million tons oil equivalent (Mtoe) of solid biomass was produced in 2005, i.e. a 3.1 Mtoe increase with respect to 2004. Production of primary energy coming from direct combustion of renewable municipal solid waste in incineration plants should also be added on to this figure. The 0,2 Mtoe increase in this production with respect to 2004 brings valorization of this type of waste up to 5,3 Mtoe in 2005. (author)

  2. Biomass goes to waste

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, J. (CPL Scientific Ltd., Newbury (United Kingdom))

    1994-08-01

    Currently the two most suitable words to describe the biomass energy industry are waste and recycling. However, there are several ways of looking at this. The first is a literal one. This reflects the current changes which are taking place in waste treatment as a consequence of new environmental initiatives. These are predicted to intensify as and when new Community Directives come into force through national legislation within the European Union (EU). At the same time biomass, in the true sense, both goes to waste as crops are not used and generates waste in terms of resources as uneconomic ventures are funded for political reasons. The net result is a depleted industry, in some sectors, and one based on false hopes in others. At the same time there is also some clarity emerging in respect of end use, with most activities focussing on decentralised electricity generation and the formation of liquid transport fuels. (Author)

  3. Biomass Maps | Geospatial Data Science | NREL

    Science.gov (United States)

    Biomass Maps Biomass Maps These maps illustrate the biomass resource in the United States by county . Biomass feedstock data are analyzed both statistically and graphically using a geographic information Data Science Team. Solid Biomass Resources Map of Total Biomass Resources in the United States Solid

  4. BIOMASS newsletter. No. 7

    International Nuclear Information System (INIS)

    Torres, Carlos

    1999-06-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  5. BIOMASS newsletter. No. 8

    International Nuclear Information System (INIS)

    Torres, Carlos

    2000-01-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  6. BIOMASS newsletter. No. 6

    International Nuclear Information System (INIS)

    Torres, Carlos

    1999-01-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  7. BIOMASS newsletter. No. 5

    International Nuclear Information System (INIS)

    Torres, Carlos

    1998-07-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  8. BIOMASS newsletter. No. 2

    International Nuclear Information System (INIS)

    Torres, Carlos

    1996-12-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  9. BIOMASS newsletter. No. 3

    International Nuclear Information System (INIS)

    Torres, Carlos

    1997-07-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  10. BIOMASS newsletter. No. 4

    International Nuclear Information System (INIS)

    Torres, Carlos

    1998-01-01

    The International Atomic Energy Agency Programme on Biosphere Modelling and Assessment (BIOMASS) Newsletter has been launched with general objectives of providing an international focal point in the area of biosphere assessment modelling, developing methods for analysis of radionuclide transfer in the biosphere for use in radiological assessment, improving modelling methods, and developing international consensus on biosphere modelling philosophies, approaches and parameter values. The main themes included in the Newsletter include radioactive waste disposal (reference biosphere), environmental releases and biosphere processes

  11. Biomass for electricity

    International Nuclear Information System (INIS)

    Barbucci, P.; Neri, G.; Trebbi, G.

    1995-01-01

    This paper describes the activities carried out at ENEL-Thermal research center to develop technologies suitable to convert biomass into power with high conversion efficiency: a demonstration project, Energy Farm, to build an Integrated Gasification Combined Cycle (IGCC) plant fed by wood chips; a demonstration plant for converting wood chips into oil by thermal conversion (pyrolysis oil); combustion tests of different oils produced by thermal conversion. 3 figs., 1 tab

  12. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2009-01-01

    The economic and financial crisis has not brought solid biomass energy growth to a standstill. Primary energy production in the European Union member states increased in 2008 by 2,3%, which represents a gain of 1,5% million tonnes of oil equivalent over 2007. This growth was particularly marked in electricity production which increased output by 10,8% over 2007, an additional 5,6 TWh. (A.L.B.)

  13. Hydrolysis of biomass material

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Andrew J.; Orth, Rick J.; Franz, James A.; Alnajjar, Mikhail

    2004-02-17

    A method for selective hydrolysis of the hemicellulose component of a biomass material. The selective hydrolysis produces water-soluble small molecules, particularly monosaccharides. One embodiment includes solubilizing at least a portion of the hemicellulose and subsequently hydrolyzing the solubilized hemicellulose to produce at least one monosaccharide. A second embodiment includes solubilizing at least a portion of the hemicellulose and subsequently enzymatically hydrolyzing the solubilized hemicellulose to produce at least one monosaccharide. A third embodiment includes solubilizing at least a portion of the hemicellulose by heating the biomass material to greater than 110.degree. C. resulting in an aqueous portion that includes the solubilized hemicellulose and a water insoluble solids portion and subsequently separating the aqueous portion from the water insoluble solids portion. A fourth embodiment is a method for making a composition that includes cellulose, at least one protein and less than about 30 weight % hemicellulose, the method including solubilizing at least a portion of hemicellulose present in a biomass material that also includes cellulose and at least one protein and subsequently separating the solubilized hemicellulose from the cellulose and at least one protein.

  14. Commercial Biomass Syngas Fermentation

    Directory of Open Access Journals (Sweden)

    James Daniell

    2012-12-01

    Full Text Available The use of gas fermentation for the production of low carbon biofuels such as ethanol or butanol from lignocellulosic biomass is an area currently undergoing intensive research and development, with the first commercial units expected to commence operation in the near future. In this process, biomass is first converted into carbon monoxide (CO and hydrogen (H2-rich synthesis gas (syngas via gasification, and subsequently fermented to hydrocarbons by acetogenic bacteria. Several studies have been performed over the last few years to optimise both biomass gasification and syngas fermentation with significant progress being reported in both areas. While challenges associated with the scale-up and operation of this novel process remain, this strategy offers numerous advantages compared with established fermentation and purely thermochemical approaches to biofuel production in terms of feedstock flexibility and production cost. In recent times, metabolic engineering and synthetic biology techniques have been applied to gas fermenting organisms, paving the way for gases to be used as the feedstock for the commercial production of increasingly energy dense fuels and more valuable chemicals.

  15. Ethanol from lignocellulosic biomasses

    International Nuclear Information System (INIS)

    Ricci, E.; Viola, E.; Zimbardi, F.; Braccio, G.; Cuna, D.

    2001-01-01

    In this report are presented results achieved on the process optimisation of bioethanol production from wheat straw, carried out within the ENEA's project of biomass exploitation for renewable energy. The process consists of three main steps: 1) biomass pretreatment by means of steam explosion; 2) enzymatic hydrolysis of the cellulose fraction; 3) fermentation of glucose. To perform the hydrolysis step, two commercial enzymatic mixtures have been employed, mainly composed by β-glucosidase (cellobiase), endo-glucanase and exo-glucanase. The ethanologenic yeast Saccharomyces cerevisiae has been used to ferment the glucose in he hydrolyzates. Hydrolysis yield of 97% has been obtained with steam exploded wheat straw treated at 220 0 C for 3 minutes and an enzyme to substrate ratio of 4%. It has been pointed out the necessity of washing with water the pretreated what straw, in order to remove the biomass degradation products, which have shown an inhibition effect on the yeast. At the best process conditions, a fermentation yield of 95% has been achieved. In the Simultaneous Saccharification and Fermentation process, a global conversion of 92% has been obtained, which corresponds to the production of about 170 grams of ethanol per kilogram of exploded straw [it

  16. Biofuel from "humified" biomass

    Science.gov (United States)

    Kpogbemabou, D.; Lemée, L.; Amblès, A.

    2009-04-01

    In France, 26% of the emissions of greenhouse effect gas originate from transportation which depends for 87% on fossil fuels. Nevertheless biofuels can contribute to the fight against climate change while reducing energetic dependence. Indeed biomass potentially represents in France 30 Mtoe a year that is to say 15% national consumption. But 80% of these resources are made of lignocellulosic materials which are hardly exploitable. First-generation biofuels are made from sugar, starch, vegetable oil, or animal fats. Due to their competition with human food chain, first-generation biofuels could lead to food shortages and price rises. At the contrary second-generation biofuel production can use a variety of non food crops while using the lignocellulosic part of biomass [1]. Gasification, fermentation and direct pyrolysis are the most used processes. However weak yields and high hydrogen need are limiting factors. In France, the National Program for Research on Biofuels (PNRB) aims to increase mobilizable biomass resource and to develop lignocellulosic biomass conversion. In this context, the LIGNOCARB project studies the liquefaction of biodegraded biomass in order to lower hydrogen consumption. Our aim was to develop and optimize the biodegradation of the biomass. Once the reactor was achieved, the influence of different parameters (starting material, aeration, moisture content) on the biotransformation process was studied. The monitored parameters were temperature, pH and carbon /nitrogen ratio. Chemical (IHSS protocol) and biochemical (van Soest) fractionations were used to follow the maturity ("humic acid"/"fulvic acid" ratio) and the biological stability (soluble, hemicelluloses, celluloses, lignin) of the organic matter (OM). In example, the increase in lignin can be related to the stabilization since the OM becomes refractory to biodegradation whereas the increase in the AH/AF ratio traduces "humification". However, contrarily to the composting process, we do

  17. Studies on the widening of the variation of the fatty acid pattern in flax (Linum usitatissimum L. ) by means of interspecific hybridisation and in-vitro techniques. Untersuchungen zur Erweiterung der genetischen Variation des Fettsaeuremusters beim Lein (Linum usitatissimum L. ) mit Hilfe von Artkreuzungen und in vitro Techniken

    Energy Technology Data Exchange (ETDEWEB)

    Nickel, M.

    1993-01-01

    Oil flux genotypes with strongly divergent fatty acid compositions of the seed oil are vegetable raw materials of great interest to industrial users, notably to manufacturers of edible oils and dietetic products. Compared with the moderately variable fatty acid pattern of Linum usitatissimum that of wild forms shows a far greater scatter. The studies on the widening of the genetic variation of the fatty acid pattern in cultivated flax by means of interspecific hybridization and embryo cultures have revealed the possibilities offered by, and limits to, these methods. Optimisation of the embryo culture techniques have for the first time made it possible to regenerate plants from globular embryos obtained by interspecific hybridization between Linum usitatissimum and L. monogynum. (orig./EF)

  18. Effect of CO{sub 2} and emissions-trading on the Swiss national economy - Analysis using a multi-country equilibrium model; Volkswirtschaftliche Auswirkungen von CO{sub 2}-Abgaben und Emissionshandel fuer das Jahr 2020 - Analyse der volkswirtschaftlichen Auswirkungen mit Hilfe eines allgemeinen Mehrlaender-Gleichgewichtsmodell

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-09-15

    This report elaborated for the Swiss Federal Office for the Environment (FOEN) deals with questions concerning Swiss climate policy after 2012. In 2012, existing climate legislation as defined in CO{sub 2} emissions legislation is to be revised and brought in line with European legislation on greenhouse gases. The report presents and discusses the proposals of the Swiss government that are to make Switzerland climate-neutral. These questions include how high a steering-tax must be in order to provide a 20% reduction in CO{sub 2} emissions, the amount of finance needed to do this, which effects on the economy in general (GDP) and on particular sectors are to be expected, how households will be affected and how large the positive secondary side-effects of an active climate policy are. The methods used in the study and their limitations are examined. A multi-country equilibrium model is introduced and various scenarios are discussed

  19. When you lubricate well, you go well? A cause analysis of damages on bearer rings at a hydrogen compressor recently brought into service with the aid of monitoring the lubricating points of cylinder liners; Wer gut schmiert, der gut faehrt? Ursachenanalyse an Tragringschaeden bei einem neu in Betrieb genommenen Wasserstoffverdichter mit Hilfe einer Zylinderschmierstellenueberwachung

    Energy Technology Data Exchange (ETDEWEB)

    Klinger, Lars [Bayernoil Raffineriegesellschaft mbH, Neustadt a.d. Donau (Germany)

    2013-02-15

    For humans the blood circuit transports the ''lifeblood''. It supplies the body with the different essential nutrients and disposes adverse waste. The circuit of lubricant in recip compressors has quiet similar functions. It provides all relevant components with lubricant. This lubricant circuit supplies i.a. the crosshead slide way and bearings, where a hydrodynamic flooding is created. At the same time frictional heat is conducted and pollutions as well as deposits are washed away. But especially for recip compressors there is also another lubricating system, which is barely applied in the real operating process. It is about the supply of the packing glands and the piston liners with lubricant inside the compression chamber at ''wet running machines''. In the case of the lubricant supply at cylinder liners the lubricating oil is dispatched to the appropriate areas by an external lubricating system, which consists of a reservoir and an oil pump. This is a loss lubrication, i.e. the used lubricate is transported into the process by the transfer medium. The mechanical quality of this lubricating system can have great influence on the durability of bearer rings and sealing rings in a recip compressor. Especially the homogeneity of the dispatched lubricating oil amount and the absolute dispatched amount are two very important factors. The absolute amount is within the range of cm{sup 3} per hour. The influences of the cylinder liner lubricant supply on the durability of piston seal rings and bearer rings are shown with the concrete example of one recip compressor. Analytical measures to clearly detect such damages at the bearer rings are disclosed, just as which possibility there is to measure the low quantity of lubricant to the cylinder liners reliably. Furthermore a solution is presented, which allows the solid operation of the compressor.

  20. MIT/Draper Technology Development Partnership Project: Systems Analysis and On-Station Propulsion Subsystem Design

    National Research Council Canada - National Science Library

    Conklin, Theodore

    1998-01-01

    The objective of this thesis is to describe the process for, and the overall design that resulted from the MIT/Draper Project from August, 1996 to May, 1997, including the specific design of the on...

  1. Entwicklung und Anwendung neuer NMR-Methoden: Orientierungsmedien zur Strukturbestimmung mit anisotropen Parametern und Metabonomics

    OpenAIRE

    Büchler, Silke

    2014-01-01

    Das Ziel dieser Arbeit war die Entwicklung und Anwendung neuer Orientierungsmedien zur Strukturbestimmung mit anisotropen Parametern, sowie die Etablierung von Metabonomics-Studien an Flüssigzellkulturen und Reispflanzen.

  2. Ernährungszustand bei Patienten mit chronisch entzündlichen Darmerkrankungen

    OpenAIRE

    Blunk, Christine

    2009-01-01

    Zahlreiche internationale Studien konnten den negativen Einfluss einer bestehenden Malnutrition auf den Verlauf einer Erkrankung belegen. Dies gilt insbesondere für Patienten mit chronisch entzündlichen Darmerkrankungen wie Morbus Crohn und Colitis ulcerosa, die wie klinische Studien gezeigt haben besonders häufig unter einer Malnutrition leiden. In der vorliegenden Studie wurde der Ernährungszustand von 127 Patienten mit chronisch entzündlichen Darmerkrankungen anhand verschiedener etabli...

  3. "Drugwatch": Forschung mit Schlüsselprofessionellen und illegalen Drogenusern zur Identifikation von Drogentrends

    OpenAIRE

    Mason, Mark; Baker, Oswin; Hardy, Rebecca

    2007-01-01

    Die revidierte "United Kingdom Anti-Drugs Strategy" hat Lücken im Wissen über Drogen verdeutlicht: Insbesondere die Dynamiken, die mit der Entstehung regionalen Drogentrends einhergehen, erwiesen sich trotz mehrjährigem Bemühen als schwer fassbar, und einige hierzu in Großbritannien durchgeführte Studien waren mit erheblichen Problemen behaftet. Deshalb wurde vom "Drugs Analysis and Research Programme" und von "Market and Opinion Research International" (MORI) ein nationales Entwicklungsproje...

  4. Renewable energy--traditional biomass vs. modern biomass

    International Nuclear Information System (INIS)

    Goldemberg, Jose; Teixeira Coelho, Suani

    2004-01-01

    Renewable energy is basic to reduce poverty and to allow sustainable development. However, the concept of renewable energy must be carefully established, particularly in the case of biomass. This paper analyses the sustainability of biomass, comparing the so-called 'traditional' and 'modern' biomass, and discusses the need for statistical information, which will allow the elaboration of scenarios relevant to renewable energy targets in the world

  5. AG TURBO, TURBOTECH II - the influence of periodic unsteady inlet flow conditions on the transition behavior of compressor cascades. Final report; AG TURBO, TURBOTECH II: Vorhaben 1.134 - Optimierung des Stroemungsverhaltens von Verdichtergittern mit CDA-Profilierung. Der Einfluss periodisch instationaerer Zustroemung auf das Transitionsverhalten von Verdichtergittern. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Fottner, L.; Teusch, R.; Kampitsch, M.

    2000-09-01

    einer modernen kostenorientierten Schaufelauslegung wird versucht, durch Optimierung der Schaufelprofile unter Beruecksichtigung der obengenannten instationaeren Effekte bei gleichbleibendem Wirkungsgrad und Leistungsverhalten die aerodynamische Schaufelbelastung zu erhoehen, wodurch eine Reduzierung der Schaufelzahl und damit eine kompaktere Bauweise mit geringerem Gewicht ermoeglicht wird. Das Resultat einer diese Effekte beruecksichtigenden Optimierung ist ein aeusserst komplexes, hochgradig dreidimensionales und instationaeres Stroemungsfeld, das hohe Anforderungen an die numerischen Auselgungsverfahren stellt. Primaeres Ziel dieser Arbeit war, durch eine detaillierte Untersuchung des instationaeren Stroemungsverhaltens um Verdichterschaufeln mit CDA-Profilierung unter dem Einfluss von Nachlaufdellen stromaufliegender Schaufelreihen einen tieferen Einblick in die physikalischen Vorgaenge innerhalb der Schaufelgrenzschicht zu ermoeglichen und mit Hilfe der experimtellen Daten instationaere numerische Verfahren zu validieren. Fuer die beiden untersuchten Verdichtergitter V110 und V111 wurde bei niedriger Zustroem-Reynoldszahl eine bis zu 20%-ige Verlustreduzierung und bei hoher Reynoldszahl ein bis zu 30%-iger Verlustanstieg gegenueber dem stationaeren Fall verzeichnet. Die Nachrechnung der experimentellen Ergebnisse mit dem instationaeren Reynolds-gemittelten Navier-Stokes-Verfahren TRACE{sub U} mit Transitionsmodellierung lieferte sehr gute Ergebnisse. Desweiteren wurden Hinweise fuer eine zukuenftige, die instationaeren Effekte beruecksichtigende Schaufelauslegung erteilt. (orig.)

  6. Advanced modularity design for the MIT pebble bed reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kadak, Andrew C. [Department of Nuclear Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 24-202 Cambridge, MA 02139-4307 (United States)]. E-mail: kadak@mit.edu; Berte, Marc V. [Department of Nuclear Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 24-202 Cambridge, MA 02139-4307 (United States)]. E-mail: mvberte@yahoo.com

    2006-03-15

    The future of all reactors will depend on whether they can be economically built and operated. One of the major impediments to new nuclear construction is the capital cost due in large part to the length of construction time and complexity of the plant. Pebble bed reactors offer the opportunity to reduce the complexity of the plant because the number of safety systems required is significantly reduced due to the inherent safety of the technology. However, because of its small size, the capital cost per kilowatt is likely to be large if traditional construction approaches are followed. This strongly suggests the need for innovative construction concepts to reduce the construction time and cost. MIT has proposed a modularity approach in which the plant is pre-built in space-frame type modules which are built in factories. These space frames would contain all the equipment contained in a given volume. Once equipment in the space frame is installed, the space frame would then be shipped to the site and assembled 'lego-style.' Studies presently underway have demonstrated the feasibility of the concept. Thermal stress analysis has been performed and an integrated design with the space frames has been developed. It is expected that this modularity approach will significantly shorten construction time and expense. This paper proposes a concept for further development, not a final design for the entire plant.

  7. Advanced modularity design for the MIT pebble bed reactor

    International Nuclear Information System (INIS)

    Kadak, Andrew C.; Berte, Marc V.

    2006-01-01

    The future of all reactors will depend on whether they can be economically built and operated. One of the major impediments to new nuclear construction is the capital cost due in large part to the length of construction time and complexity of the plant. Pebble bed reactors offer the opportunity to reduce the complexity of the plant because the number of safety systems required is significantly reduced due to the inherent safety of the technology. However, because of its small size, the capital cost per kilowatt is likely to be large if traditional construction approaches are followed. This strongly suggests the need for innovative construction concepts to reduce the construction time and cost. MIT has proposed a modularity approach in which the plant is pre-built in space-frame type modules which are built in factories. These space frames would contain all the equipment contained in a given volume. Once equipment in the space frame is installed, the space frame would then be shipped to the site and assembled 'lego-style.' Studies presently underway have demonstrated the feasibility of the concept. Thermal stress analysis has been performed and an integrated design with the space frames has been developed. It is expected that this modularity approach will significantly shorten construction time and expense. This paper proposes a concept for further development, not a final design for the entire plant

  8. Lessons learned from the MIT Tara control and data system

    International Nuclear Information System (INIS)

    Gaudreau, M.P.J.; Sullivan, J.D.; Fredian, T.W.; Irby, J.H.; Karcher, C.A.; Rameriz, R.A.; Sevillano, E.; Stillerman, J.A.; Thomas, P.

    1987-10-01

    The control and data system of the MIT Tara Tandem Mirror has worked successfully throughout the lifetime of the experiment (1983 through 1987). As the Tara project winds down, it is appropriate to summarize the lessons learned from the implementation and operation of the control and data system over the years and in its final form. The control system handled ∼2400 I/0 points in real time throughout the 5 to 10 minute shot cycle while the data system, in near real time, handled ∼1000 signals with a total of 5 to 7 Mbytes of data each shot. The implementation depended upon a consistent approach based on separating physics and engineering functions and on detailed functional diagrams with narrowly defined cross communication. This paper is a comprehensive treatment of the principal successes, residual problems, and dilemmas that arose from the beginning until the final hardware and software implementation. Suggestions for future systems of either similar size or of larger scale such as CIT are made in the conclusion. 11 refs., 1 fig

  9. Uruguay's ambitious energy goals: Focus on biomass; Uruguayische Energie-Offensive. Ambitionierte Ziele sollen vor allem mit Biomasse erreicht werden

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Dierk

    2012-07-01

    Pasture farming has a long-standing tradition in Uruguay, but it is threatened now as soy, rice, citrus fruit, sugar cane and especially forest wood are getting sought after as animal feed and power generation materials. While forests are growing, the country's energy policy is aiming at a 50 percent share of renewable energy sources in primary energy supply. This makes Uruguay a leading country in Latin America. (orig.)

  10. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2007-01-01

    Primary energy production from solid biomass (wood, wood waste and other solid vegetal and animal materials) reached 62,4 million tons oil equivalent (Mtoe) in 2006, i-e 3,1 more than in 2005. The primary energy coming from the direct combustion of renewable origin solid urban waste in incineration unit scan also be added to this figure. In 2006 this represented a production of 5,3 Mtoe, i-e 0,1 Mtoe more than in 2005. (author)

  11. Ecosystems and biomass energy

    International Nuclear Information System (INIS)

    Trossero, M.A.

    1995-01-01

    Biomass, particularly fuelwood and charcoal, is one of the main sources of fuel to meet the energy needs of traditional, commercial and industrial activities in developing countries. While it satisfies only about 14% of the world's primary energy needs, in some countries it satisfies up to 80% of those needs. As a result of population growth, urbanization, economic reforms, restructuring and new development targets in most of these countries, new forms of energy and a more intensive use of energy are expected for the years ahead. This additional demand for energy will be met mainly by hydroelectricity, coal and fossil fuels. However, where biomass is available or can be planted, bio fuels can be converted into new forms of energy (electricity and power) and energy carriers (liquid and gaseous fuels) to meet not only the energy needs of the modem sectors but also to maintain a sustainable supply to traditional users. In fact, FAO estimates that biomass could provide nearly three times more energy than it does without affecting the current supply of other commodities and goods such as food, fodder, fuel, timber and non-wood fuel products. The benefits derived from the utilization of biomass as a source of energy are twofold: (a) the task of supplying bio fuels can help to attract new investment, create new employment and income opportunities in rural areas, raise the value of natural resources and preserve the environment and (b) new forms of energy and energy carriers could foster increased production and productivity at the rural and community level, particularly in remote areas where conventional fuels are not easily available at affordable prices. Bioenergy can be easily developed in modular and decentralized schemes and offers many advantages. It could be an inexpensive source of energy, even at present energy prices, and it requires less capital investment for its implementation than alternative solutions. However, there are many disadvantages, too. For

  12. Ecosystems and biomass energy

    Energy Technology Data Exchange (ETDEWEB)

    Trossero, M A [Food and Agriculture Organization of the United Nations (FAO), Rome (Italy)

    1995-12-01

    Biomass, particularly fuelwood and charcoal, is one of the main sources of fuel to meet the energy needs of traditional, commercial and industrial activities in developing countries. While it satisfies only about 14% of the world`s primary energy needs, in some countries it satisfies up to 80% of those needs. As a result of population growth, urbanization, economic reforms, restructuring and new development targets in most of these countries, new forms of energy and a more intensive use of energy are expected for the years ahead. This additional demand for energy will be met mainly by hydroelectricity, coal and fossil fuels. However, where biomass is available or can be planted, bio fuels can be converted into new forms of energy (electricity and power) and energy carriers (liquid and gaseous fuels) to meet not only the energy needs of the modem sectors but also to maintain a sustainable supply to traditional users. In fact, FAO estimates that biomass could provide nearly three times more energy than it does without affecting the current supply of other commodities and goods such as food, fodder, fuel, timber and non-wood fuel products. The benefits derived from the utilization of biomass as a source of energy are twofold: (a) the task of supplying bio fuels can help to attract new investment, create new employment and income opportunities in rural areas, raise the value of natural resources and preserve the environment and (b) new forms of energy and energy carriers could foster increased production and productivity at the rural and community level, particularly in remote areas where conventional fuels are not easily available at affordable prices. Bioenergy can be easily developed in modular and decentralized schemes and offers many advantages. It could be an inexpensive source of energy, even at present energy prices, and it requires less capital investment for its implementation than alternative solutions. However, there are many disadvantages, too. For

  13. Hydrothermal Liquefaction of Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Douglas C.

    2010-12-10

    Hydrothermal liquefaction technology is describes in its relationship to fast pyrolysis of biomass. The scope of work at PNNL is discussed and some intial results are presented. HydroThermal Liquefaction (HTL), called high-pressure liquefaction in earlier years, is an alternative process for conversion of biomass into liquid products. Some experts consider it to be pyrolysis in solvent phase. It is typically performed at about 350 C and 200 atm pressure such that the water carrier for biomass slurry is maintained in a liquid phase, i.e. below super-critical conditions. In some applications catalysts and/or reducing gases have been added to the system with the expectation of producing higher yields of higher quality products. Slurry agents ('carriers') evaluated have included water, various hydrocarbon oils and recycled bio-oil. High-pressure pumping of biomass slurry has been a major limitation in the process development. Process research in this field faded away in the 1990s except for the HydroThermal Upgrading (HTU) effort in the Netherlands, but has new resurgence with other renewable fuels in light of the increased oil prices and climate change concerns. Research restarted at Pacific Northwest National Laboratory (PNNL) in 2007 with a project, 'HydroThermal Liquefaction of Agricultural and Biorefinery Residues' with partners Archer-Daniels-Midland Company and ConocoPhillips. Through bench-scale experimentation in a continuous-flow system this project investigated the bio-oil yield and quality that could be achieved from a range of biomass feedstocks and derivatives. The project was completed earlier this year with the issuance of the final report. HydroThermal Liquefaction research continues within the National Advanced Biofuels Consortium with the effort focused at PNNL. The bench-scale reactor is being used for conversion of lignocellulosic biomass including pine forest residue and corn stover. A complementary project is an international

  14. Biomass Energy Generation Project

    Energy Technology Data Exchange (ETDEWEB)

    Olthoff, Edward [Cedar Falls Utilities, Cedar Falls, IA (United States)

    2017-05-15

    The Municipal Electric Utility of the City of Cedar Falls (dba Cedar Fals Utilities or CFU) received a congressionally directed grant funded through DOE-EERE to run three short (4 hour) duration test burns and one long (10 days) duration test burn to test the viability of renewable fuels in Streeter Station Boiler #6, a stoker coal fired electric generation unit. The long test burn was intended to test supply chain assumptions, optimize boiler combustion and assess the effects of a longer duration burn of biomass on the boiler.

  15. Methanol from biomass and hydrogen

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    For Hawaii in the near term, the only liquid fuels indigenous sources will be those that can be made from biomass, and of these, methanol is the most promising. In addition, hydrogen produced by electrolysis can be used to markedly increase the yield of biomass methanol. This paper calculates cost of producing methanol by an integrated system including a geothermal electricity facility plus a plant producing methanol by gasifying biomass and adding hydrogen produced by electrolysis. Other studies cover methanol from biomass without added hydrogen and methanol from biomass by steam and carbon dioxide reforming. Methanol is made in a two-step process: the first is the gasification of biomass by partial oxidation with pure oxygen to produce carbon oxides and hydrogen, and the second is the reaction of gases to form methanol. Geothermal steam is used to generate the electricity used for the electrolysis to produce the added hydrogen

  16. Ash Properties of Alternative Biomass

    DEFF Research Database (Denmark)

    Capablo, Joaquin; Jensen, Peter Arendt; Pedersen, Kim Hougaard

    2009-01-01

    analysis into three main groups depending upon their ash content of silica, alkali metal, and calcium and magnesium. To further detail the biomass classification, the relative molar ratio of Cl, S, and P to alkali were included. The study has led to knowledge on biomass fuel ash composition influence...... on ash transformation, ash deposit flux, and deposit chlorine content when biomass fuels are applied for suspension combustion....

  17. Biomass in Latin America -- overview

    International Nuclear Information System (INIS)

    Park, W.R.

    1993-01-01

    The paper discusses the interest of the Organization of American States as a participant in this hemispheric conference on biomass, provides an introduction to the Latin American experience in biomass energy through open-quotes snapshotsclose quotes of various country activities, and concludes with a discussion of four conditions that form strong incentives for new north/south and south/north ventures in the biomass energy and chemical arena in this hemisphere

  18. Energy from biomass: An overview

    International Nuclear Information System (INIS)

    Van der Toorn, L.J.; Elliott, T.P.

    1992-01-01

    Attention is paid to the effect of the use of energy from biomass on the greenhouse effect. An overview is given of the aspects of forest plantation, carbon dioxide fixation and energy from biomass, in particular with regard to the potential impact of the use of biomass energy on the speed of accumulation of carbon in the atmosphere. A simple model of the carbon cycle to illustrate the geochemical, biological and antropogenic characteristics of the cycle is presented and briefly discussed. Biomass, which is appropriate for energy applications, can be subdivided into three categories: polysaccharides, vegetable oils, and lignocellulosis. The costs for the latter are discussed. Three important options to use biomass as a commercial energy source are solid fuels, liquid fuels, and power generation. For each option the value of energy (on a large-scale level) is compared to the costs of several types of biomass. Recent evaluation of new techniques show that small biomass conversion plants can realize an electricity efficiency of 40%, with capitalized costs far below comparable conventional biomass conversion plants. One of the policy instruments to stimulate the use of biomass as an energy source is the carbon levy, in which the assumed external costs to reduce carbon dioxide emission are expressed. Political and administrative feasibility are important factors in the decision making with regard to carbon storage and energy plantations. 6 figs

  19. Biomass for energy. Danish solutions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Information is given on a number of typical and recently established plants of all types and sizes, for converting the main Danish biomass resources (manures, straw and wood derived from agricultural activities and forestry)into energy. Danish biomass resources and energy and environmental policies are described. In Denmark there is a very wide range of technologies for converting biomass into energy, and these are clarified. In addition, performance data from a number of plants fuelled with biomass fuels are presented. The course of further developments within this field is suggested. The text is illustrated with a considerable number of coloured photographs and also with graphs and diagrams. (ARW)

  20. Modelling tree biomasses in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Repola, J.

    2013-06-01

    Biomass equations for above- and below-ground tree components of Scots pine (Pinus sylvestris L), Norway spruce (Picea abies [L.] Karst) and birch (Betula pendula Roth and Betula pubescens Ehrh.) were compiled using empirical material from a total of 102 stands. These stands (44 Scots pine, 34 Norway spruce and 24 birch stands) were located mainly on mineral soil sites representing a large part of Finland. The biomass models were based on data measured from 1648 sample trees, comprising 908 pine, 613 spruce and 127 birch trees. Biomass equations were derived for the total above-ground biomass and for the individual tree components: stem wood, stem bark, living and dead branches, needles, stump, and roots, as dependent variables. Three multivariate models with different numbers of independent variables for above-ground biomass and one for below-ground biomass were constructed. Variables that are normally measured in forest inventories were used as independent variables. The simplest model formulations, multivariate models (1) were mainly based on tree diameter and height as independent variables. In more elaborated multivariate models, (2) and (3), additional commonly measured tree variables such as age, crown length, bark thickness and radial growth rate were added. Tree biomass modelling includes consecutive phases, which cause unreliability in the prediction of biomass. First, biomasses of sample trees should be determined reliably to decrease the statistical errors caused by sub-sampling. In this study, methods to improve the accuracy of stem biomass estimates of the sample trees were developed. In addition, the reliability of the method applied to estimate sample-tree crown biomass was tested, and no systematic error was detected. Second, the whole information content of data should be utilized in order to achieve reliable parameter estimates and applicable and flexible model structure. In the modelling approach, the basic assumption was that the biomasses of

  1. Pipelines : moving biomass and energy

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, A. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mechanical Engineering

    2006-07-01

    Moving biomass and energy through pipelines was presented. Field sourced biomass utilization for fuel was discussed in terms of competing cost factors; economies of scale; and differing fuel plant sizes. The cost versus scale in a bioenergy facility was illustrated in chart format. The transportation cost of biomass was presented as it is a major component of total biomass processing cost and is in the typical range of 25-45 per cent of total processing costs for truck transport of biomass. Issues in large scale biomass utilization, scale effects in transportation, and components of transport cost were identified. Other topics related to transportation issues included approaches to pipeline transport; cost of wood chips in pipeline transport; and distance variable cost of transporting wood chips by pipeline. Practical applications were also offered. In addition, the presentation provided and illustrated a model for an ethanol plant supplied by truck transport as well as a sample configuration for 19 truck based ethanol plants versus one large facility supplied by truck plus 18 pipelines. Last, pipeline transport of bio-oil and pipeline transport of syngas was discussed. It was concluded that pipeline transport can help in reducing congestion issues in large scale biomass utilization and that it can offer a means to achieve large plant size. Some current research at the University of Alberta on pipeline transport of raw biomass, bio-oil and hydrogen production from biomass for oil sands and pipeline transport was also presented. tabs., figs.

  2. Estimating Swedish biomass energy supply

    International Nuclear Information System (INIS)

    Johansson, J.; Lundqvist, U.

    1999-01-01

    Biomass is suggested to supply an increasing amount of energy in Sweden. There have been several studies estimating the potential supply of biomass energy, including that of the Swedish Energy Commission in 1995. The Energy Commission based its estimates of biomass supply on five other analyses which presented a wide variation in estimated future supply, in large part due to differing assumptions regarding important factors. In this paper, these studies are assessed, and the estimated potential biomass energy supplies are discusses regarding prices, technical progress and energy policy. The supply of logging residues depends on the demand for wood products and is limited by ecological, technological, and economic restrictions. The supply of stemwood from early thinning for energy and of straw from cereal and oil seed production is mainly dependent upon economic considerations. One major factor for the supply of willow and reed canary grass is the size of arable land projected to be not needed for food and fodder production. Future supply of biomass energy depends on energy prices and technical progress, both of which are driven by energy policy priorities. Biomass energy has to compete with other energy sources as well as with alternative uses of biomass such as forest products and food production. Technical progress may decrease the costs of biomass energy and thus increase the competitiveness. Economic instruments, including carbon taxes and subsidies, and allocation of research and development resources, are driven by energy policy goals and can change the competitiveness of biomass energy

  3. Liquid fuel from biomass

    International Nuclear Information System (INIS)

    Breinholt, T.; Gylling, M.; Parsby, M.; Meyer Henius, U.; Sander Nielsen, B.

    1992-09-01

    Various options for Danish production of liquid motor fuels from biomass have been studied in the context of the impact of EEC new common agricultural policy on prices and production quantities of crops, processes and production economy, restraints concerning present and future markets in Denmark, environmental aspects, in particular substitution of fossil fuels in the overall production and end-use, revenue loss required to assure competition with fossil fuels and national competence in business, industry and research. The options studied are rapeseed oil and derivates, ethanol, methanol and other thermo-chemical conversion products. The study shows that the combination of fuel production and co-generation of heat and electricity carried out with energy efficiency and utilization of surplus electricity is important for the economics under Danish conditions. Considering all aspects, ethanol production seems most favorable but in the long term, pyrolyses with catalytic cracking could be an interesting option. The cheapest source of biomass in Denmark is straw, where a considerable amount of the surplus could be used. Whole crop harvested wheat on land otherwise set aside to be fallow could also be an important source for ethanol production. Most of the options contribute favorably to reductions of fossil fuel consumption, but variations are large and the substitution factor is to a great extent dependent on the individual case. (AB) (32 refs.)

  4. Communal biomass conversion plants

    International Nuclear Information System (INIS)

    1991-06-01

    The Coordinating Committee set up by the Danish government in 1986 were given the responsibility of investigating the potentials for biomass conversion plants in Denmark, especially in relation to agricultural, environmental and energy aspects. The results of the Committee's plan of management for this project are presented. This main report covers 13 background reports which deal with special aspects in detail. The report describes the overall plan of management, the demonstration and follow-up programme and the individual biogas demonstration plants. Information gained from these investigations is presented. The current general status, (with emphasis on the technical and economical aspects) and the prospects for the future are discussed. The interest other countries have shown in Danish activities within the field of biogas production is described, and the possibilities for Danish export of technology and know-how in this relation are discussed. It is claimed that Denmark is the first country that has instigated a coordinated development programme for biomass conversion plants. (AB) 24 refs

  5. Biomass and territory

    International Nuclear Information System (INIS)

    Leca, Christel; Regnier, Yannick; Couturier, Christian; Cousin, Stephane; Defaye, Serge; Jilek, Wolfgang; Merle, Sophie; Le Treis, Marc; Jacques, Dominique; Gauthier, Alice; Formerg, Thomas; Duffes, Thomas; Bellanger, Delphine; Nguyen, Elodie

    2012-01-01

    As the biomass sector is growing, several questions are raised regarding the durability of the use of wood as energy source: risk of forest over-exploitation, impact of particles on health, oversized projects without any relationship with local interests, controversy on carbon assessment, massive imports of pellets without real guarantee of durability. A first article addresses the role of French local communities, and identifies six main regions with different characteristics. The example of the Austrian region of Styria is discussed where the share of renewable energies has reached 26,5% (61% of biomass including paper mill wastes). Opportunities and limitations of the development of the agro-fuel sector are briefly discussed. The case of the city of Aubenas is commented (heat network supplied by wood). The issue of short circuit supply is discussed. Other articles outline how air quality is an asset for wood energy, discuss which kind of wood is adapted to an environment-friendly heating, the need to promote wood energy, the importance of the empowerment of local communities, the perspective of a new law on heat, the need to review mechanisms supporting cogeneration, and the role of the French rural network (Reseau Rural Francais) to support rural actors of the wood energy sector

  6. Erste Erfahrungen mit RDA an wissenschaftlichen Universalbibliotheken in Deutschland - Ergebnisse aus Fokusgruppengesprächen mit Katalogisierenden

    Directory of Open Access Journals (Sweden)

    Heidrun Wiesenmüller

    2017-04-01

    Full Text Available Einige Monate nach dem Umstieg auf das neue Regelwerk "Resource Description and Access" (RDA wurden an 18 großen deutschen wissenschaftlichen Universalbibliotheken Fokusgruppengespräche mit Katalogisierererinnen und Katalogisierern durchgeführt. Die Katalogisierenden wurden u.a. befragt, wie sicher sie sich bei der Anwendung von RDA fühlen, was sie am neuen Regelwerk gut oder schlecht finden, wie sie den Aufwand im Vergleich zum früheren Regelwerk RAK einschätzen, welche Informations- und Hilfsmittel sie verwenden und wie sie zu den regelmäßigen Änderungen im Standard stehen. Der vorliegende Aufsatz dokumentiert die Ergebnisse der Gespräche.   Several months after the introduction of the new cataloging standard "Resource Description and Access" (RDA, focus-group interviews with catalogers were conducted at 18 large academic and state libraries in Germany. Among other things, the catalogers were asked how confident they feel in applying RDA, which aspects of the new cataloging code they like or do not like, how they estimate the expenditure of time in comparison to the former cataloging code RAK, which sources they use to get help or information, and what they think about the frequent changes to the new standard. The paper presents the results of these interviews.

  7. Vegetal and animal biomass; Les biomasses vegetales et animales

    Energy Technology Data Exchange (ETDEWEB)

    Combarnous, M. [Bordeaux-1 Univ., Lab. Energetique et Phenomenes de Transfert, UMR CNRS ENSAM, 33 - Talence (France)

    2005-07-01

    This presentation concerns all types of biomass of the earth and the seas and the relative implicit consumptions. After an evaluation of the food needs of the human being, the author discusses the solar energy conversion, the energetic flux devoted to the agriculture production, the food chain and the biomass. (A.L.B.)

  8. Detailed modelling of biomass pyrolysis: biomass structure and composition

    International Nuclear Information System (INIS)

    Hugony, F.; Migliavacca, G.; Faravelli, T.; Ranzi, E.

    2007-01-01

    The research routes followed in the field of numerical modelling development for biomass devolatilization are here summarised. In this first paper a wide introduction concerning the description of the chemical nature of the main classes of compounds which constitute biomasses is reported, it is the starting point for the subsequent description of the developed models, described in the companion paper [it

  9. System and process for biomass treatment

    Science.gov (United States)

    Dunson, Jr., James B; Tucker, III, Melvin P; Elander, Richard T; Lyons, Robert C

    2013-08-20

    A system including an apparatus is presented for treatment of biomass that allows successful biomass treatment at a high solids dry weight of biomass in the biomass mixture. The design of the system provides extensive distribution of a reactant by spreading the reactant over the biomass as the reactant is introduced through an injection lance, while the biomass is rotated using baffles. The apparatus system to provide extensive assimilation of the reactant into biomass using baffles to lift and drop the biomass, as well as attrition media which fall onto the biomass, to enhance the treatment process.

  10. Biomass burning in Africa: As assessment of annually burned biomass

    International Nuclear Information System (INIS)

    Delmas, R.A.; Loudjani, P.; Podaire, A.; Menaut, J.C.

    1991-01-01

    It is now established that biomass burning is the dominant phenomenon that controls the atmospheric chemistry in the tropics. Africa is certainly the continent where biomass burning under various aspects and processes is the greatest. Three different types of burnings have to be considered-bush fires in savanna zones which mainly affect herbaceous flora, forest fires due to forestation for shifting agriculture or colonization of new lands, and the use of wood as fuel. The net release of carbon resulting from deforestation is assumed to be responsible for about 20% of the CO 2 increase in the atmosphere because the burning of forests corresponds to a destorage of carbon from the biospheric reservoir. The amount of reactive of greenhouse gases emitted by biomass burning is directly proportional, through individual emission factors, to the biomass actually burned. This chapter evaluates the biomass annually burned on the African continent as a result of the three main burning processes previously mentioned

  11. ALTENER - Biomass event in Finland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The publication contains the lectures held in the Biomass event in Finland. The event was divided into two sessions: Fuel production and handling, and Co-combustion and gasification sessions. Both sessions consisted of lectures and the business forum during which the companies involved in the research presented themselves and their research and their equipment. The fuel production and handling session consisted of following lectures and business presentations: AFB-NETT - business opportunities for European biomass industry; Wood waste in Europe; Wood fuel production technologies in EU- countries; new drying method for wood waste; Pellet - the best package for biofuel - a view from the Swedish pelletmarket; First biomass plant in Portugal with forest residue fuel; and the business forum of presentations: Swedish experiences of willow growing; Biomass handling technology; Chipset 536 C Harvester; KIC International. The Co-combustion and gasification session consisted of following lectures and presentations: Gasification technology - overview; Overview of co-combustion technology in Europe; Modern biomass combustion technology; Wood waste, peat and sludge combustion in Enso Kemi mills and UPM-Kymmene Rauma paper mill; Enhanced CFB combustion of wood chips, wood waste and straw in Vaexjoe in Sweden and Grenaa CHP plant in Denmark; Co-combustion of wood waste; Biomass gasification projects in India and Finland; Biomass CFB gasifier connected to a 350 MW{sub t}h steam boiler fired with coal and natural gas - THERMIE demonstration project in Lahti (FI); Biomass gasification for energy production, Noord Holland plant in Netherlands and Arbre Energy (UK); Gasification of biomass in fixed bed gasifiers, Wet cleaning and condensing heat recovery of flue gases; Combustion of wet biomass by underfeed grate boiler; Research on biomass and waste for energy; Engineering and consulting on energy (saving) projects; and Research and development on combustion of solid fuels

  12. ALTENER - Biomass event in Finland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The publication contains the lectures held in the Biomass event in Finland. The event was divided into two sessions: Fuel production and handling, and Co-combustion and gasification sessions. Both sessions consisted of lectures and the business forum during which the companies involved in the research presented themselves and their research and their equipment. The fuel production and handling session consisted of following lectures and business presentations: AFB-NETT - business opportunities for European biomass industry; Wood waste in Europe; Wood fuel production technologies in EU- countries; new drying method for wood waste; Pellet - the best package for biofuel - a view from the Swedish pelletmarket; First biomass plant in Portugal with forest residue fuel; and the business forum of presentations: Swedish experiences of willow growing; Biomass handling technology; Chipset 536 C Harvester; KIC International. The Co-combustion and gasification session consisted of following lectures and presentations: Gasification technology - overview; Overview of co-combustion technology in Europe; Modern biomass combustion technology; Wood waste, peat and sludge combustion in Enso Kemi mills and UPM-Kymmene Rauma paper mill; Enhanced CFB combustion of wood chips, wood waste and straw in Vaexjoe in Sweden and Grenaa CHP plant in Denmark; Co-combustion of wood waste; Biomass gasification projects in India and Finland; Biomass CFB gasifier connected to a 350 MW{sub t}h steam boiler fired with coal and natural gas - THERMIE demonstration project in Lahti (FI); Biomass gasification for energy production, Noord Holland plant in Netherlands and Arbre Energy (UK); Gasification of biomass in fixed bed gasifiers, Wet cleaning and condensing heat recovery of flue gases; Combustion of wet biomass by underfeed grate boiler; Research on biomass and waste for energy; Engineering and consulting on energy (saving) projects; and Research and development on combustion of solid fuels

  13. Biomass Scenario Model | Energy Analysis | NREL

    Science.gov (United States)

    Biomass Scenario Model Biomass Scenario Model The Biomass Scenario Model (BSM) is a unique range of lignocellulosic biomass feedstocks into biofuels. Over the past 25 years, the corn ethanol plant matter (lignocellulosic biomass) to fermentable sugars for the production of fuel ethanol

  14. Biomass Energy | Climate Neutral Research Campuses | NREL

    Science.gov (United States)

    Biomass Energy Biomass Energy Biomass from local sources can be key to a campus climate action plan biomass may fit into your campus climate action plan. Campus Options Considerations Sample Project Related biomass fuels for energy does not add to the net amount of carbon in the atmosphere. This is because the

  15. Knocking down mitochondrial iron transporter (MIT) reprograms primary and secondary metabolism in rice plants.

    Science.gov (United States)

    Vigani, Gianpiero; Bashir, Khurram; Ishimaru, Yasuhiro; Lehmann, Martin; Casiraghi, Fabio Marco; Nakanishi, Hiromi; Seki, Motoaki; Geigenberger, Peter; Zocchi, Graziano; Nishizawa, Naoko K

    2016-03-01

    Iron (Fe) is an essential micronutrient for plant growth and development, and its reduced bioavailability strongly impairs mitochondrial functionality. In this work, the metabolic adjustment in the rice (Oryza sativa) mitochondrial Fe transporter knockdown mutant (mit-2) was analysed. Biochemical characterization of purified mitochondria from rice roots showed alteration in the respiratory chain of mit-2 compared with wild-type (WT) plants. In particular, proteins belonging to the type II alternative NAD(P)H dehydrogenases accumulated strongly in mit-2 plants, indicating that alternative pathways were activated to keep the respiratory chain working. Additionally, large-scale changes in the transcriptome and metabolome were observed in mit-2 rice plants. In particular, a strong alteration (up-/down-regulation) in the expression of genes encoding enzymes of both primary and secondary metabolism was found in mutant plants. This was reflected by changes in the metabolic profiles in both roots and shoots of mit-2 plants. Significant alterations in the levels of amino acids belonging to the aspartic acid-related pathways (aspartic acid, lysine, and threonine in roots, and aspartic acid and ornithine in shoots) were found that are strictly connected to the Krebs cycle. Furthermore, some metabolites (e.g. pyruvic acid, fumaric acid, ornithine, and oligosaccharides of the raffinose family) accumulated only in the shoot of mit-2 plants, indicating possible hypoxic responses. These findings suggest that the induction of local Fe deficiency in the mitochondrial compartment of mit-2 plants differentially affects the transcript as well as the metabolic profiles in root and shoot tissues. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  16. Spin-dependent Nucleon Structure Studies at MIT/Bates

    International Nuclear Information System (INIS)

    Botto, T.

    2005-01-01

    We present preliminary results from recent measurements of the proton, neutron and deuterium electro-magnetic form factors obtained by the BLAST collaboration at the MIT/Bates Linear Accelerator Facility. BLAST (Bates Large Acceptance Spectrometer Toroid) is a large-acceptance multi-purpose detector dedicated to studies of exclusive spin-dependent electron scattering from internal polarized targets. BLAST makes use of stored electron beam currents in excess of 150 mA with a 60-70% polarization. The electron beam is let through a 15 mm diameter, 60 cm long open-ended storage cell which is fed with ultra-pure, high-polarization H1,D1 gas from an Atomic Beam Source. The target polarization can be rapidly reversed between different vector and tensor target states, thus minimizing systematic uncertainties. The target spin can be oriented to any in-plane direction via a set of Helmholtz coils. Target polarizations in the storage cell of up to 80% (vector) and 70% (tensor) have been routinely achieved over a period of several months. Our data on the D-vector(e-vector,e'n) reaction off vector polarized deuterium allow for a unique extraction of the neutron charge form factor G E n . At same time, complementary measurements of G M n , T20 and the spin-dependent nucleon momentum distributions in deuterium are obtained via the D-vector(e-vector,e'), D (e-vector,e'd) and D (e-vector,e'p) reactions. In addition, BLAST data on vector polarized hydrogen will provide novel measurements of the GE/GM form-factor ratio on the proton as well as of the spin-dependent electro-excitation of the Δ(1232) resonance. Such comprehensive program on few body physics is now well underway and preliminary data will be presented

  17. Verantwortlicher Umgang mit Antibiotika: Notwendigkeit der Antibiotikareduktion in der Aknetherapie.

    Science.gov (United States)

    Gollnick, Harald P M; Buer, Jan; Beissert, Stefan; Sunderkätter, Cord

    2016-12-01

    Der übermäßige oder unkritische weltweite Einsatz von Antibiotika in der Medizin hat die Ausbreitung von Antibiotikaresistenzen beschleunigt. In einigen Bereichen sind viele Antibiotika bei bakteriellen Infektionen, die zuvor noch gut auf antibakterielle Wirkstoffe reagierten, mittlerweile wirkungslos geworden. Dermatologen/Venerologen setzten orale und topische Antibiotika bei der Behandlung von Acne vulgaris routinemäßig ein, obwohl Akne weder eine infektiöse Erkrankung ist noch alleine durch das Propionibacterium getriggert wird. Vielmehr ist sie eine komplexe, chronische entzündliche Hauterkrankung, die durch verschiedene pathogenetische Faktoren wie follikuläre Hyperkeratose, erhöhter Sebumproduktion, bakterielle Proliferation und Entzündung zustande kommt. Folglich sollte eine erfolgreiche Therapie auf die Bekämpfung verschiedener pathogenetischer Faktoren und nicht nur auf die von Propionibacterium acnes abzielen. Daher wurden topische Retinoide und Benzoylperoxid als Mittel der ersten Wahl definiert. Monotherapien mit lokalen Antibiotika sollten insgesamt vermieden werden. Systemische Antibiotika der Tetrazyklin-Gruppe haben bei bestimmen Krankheitsstadien ihren Sinn, ihre Wirkung könnte aber eher auf der antientzündlichen als auf der antibiotischen Reaktion beruhen. Gesundheitsbehörden ermahnen alle Gesundheitsdienstleister, den Einsatz von Antibiotika einzuschränken. Das Nutzen-Risiko-Verhältnis muss bei der Entscheidung für oder gegen eine antibiotische Therapie bei einem einzelnen Patienten immer auch in Bezug auf das öffentliche Interesse am Erhalt der Wirksamkeit von Antibiotika abgewogen werden. Im Folgenden werden das aktuelle Krankheitskonzept zu Acne vulgaris und die sich daraus ableitenden Konsequenzen für den Einsatz von Antibiotika vorgestellt. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  18. Mit Bourdieu in die Stadt: Relevanz, Prinzipien, Anwendungen

    Directory of Open Access Journals (Sweden)

    Loïc Wacquant

    2017-06-01

    Full Text Available Dieser Beitrag zeigt die Relevanz der Soziologie Bourdieus für die Stadtforschung auf, indem er Bourdieus Frühwerk zu Macht, Raum und Urbanisierung im Béarn und Algerien aufgreift und es mit seinem Spätwerk verknüpft, in welchem er das soziale Leiden in der französischen Metropole analysiert. Es wirft ein Schlaglicht auf die vier übergreifenden Prinzipien, die Bourdieus Forschungspraxis antreiben und eine fruchtbare Anleitung für die Stadtforschung sein können: den Bachelardschen Imperativ des erkenntnistheoretischen Bruchs und der erkenntnistheoretischen Wachsamkeit; die Webersche Aufforderung zur dreifachen Historisierung des Handelnden (Habitus, der Welt (sozialer Raum, wovon das soziale Feld lediglich einen Untertypus darstellt und der Kategorien des Analytikers (erkenntnistheoretische Reflexivität; den Leibnizschen-Durkheimschen Vorschlag, eine topologische Denkweise zu nutzen, um den Wechselbeziehungen zwischen symbolischem, sozialem und physischem Raum nachzuspüren; sowie das Cassirersche Moment, das uns dazu anhält, die konstitutive Wirksamkeit symbolischer Strukturen zur Kenntnis zu nehmen. Ich möchte zudem auf drei Fallstricke hinweisen, die eine Stadtforschung auf den Spuren Bourdieus tunlichst vermeiden sollte: die Fetischisierung von Konzepten; die Verlockung, sich der Sprache Bourdieus zu bedienen („speaking Bourdieuse“, ohne die Forschungsschritte, die die Bourdieuschen Begriffe verlangen, tatsächlich durchzuführen; sowie das zwanghafte Überstülpen seines Theorierahmens als Ganzes auch in Fällen, in denen es produktiver wäre, einzelne Bausteine zu übertragen.

  19. Undergraduate Research and Education at MIT Haystack Observatory

    Science.gov (United States)

    Pratap, P.; Salah, J.

    2000-05-01

    The MIT Haystack Observatory Undergraduate Research Initiative is an NSF- funded program aimed at involving undergraduate students in active radio astronomical research. The project has two major thrusts - students get hands-on experience using a small radio telescope that has been developed at Haystack and which will be provided as a low cost kit early next year. Beta versions of this telescope are being built for a select group of institutions. The second component is a research experience with the Haystack 37-m telescope. Use of the 37-m telescope has ranged from classroom demonstrations to original research projects. The Small Radio Telescope (SRT) project consists of a 2m dish with a 1420 MHz receiver. The antenna has a two axis mount that provides full sky coverage. The telescope is intended to provide students and faculty with an introduction to radio astronomy and instrument calibration. Observations of the sun and the galactic HI line are possible with the current version of this telescope. The 37-m telescope program is aimed at providing students with a research experience that can result in publishable results. The telescope has also been used in providing students with an introduction to the scope of radio astronomical data including continuum and spectral line observations. Classroom demonstrations have also been tested with non-science majors. Extensive supporting materials for the project have been developed on the world wide web. These include a radio astronomy tutorial, hardware and software information about both telescopes and project descriptions. We also provide curriculum suggestions to aid faculty incorporate radio astronomy into their courses.

  20. OUT Success Stories: Biomass Gasifiers

    International Nuclear Information System (INIS)

    Jones, J.

    2000-01-01

    The world's first demonstration of an efficient, low-pressure biomass gasifier capable of producing a high-quality fuel is now operating in Vermont. The gasifier converts 200 tons of solid biomass per day into a clean-burning gas with a high energy content for electricity generation

  1. Fundamentals of Biomass pellet production

    DEFF Research Database (Denmark)

    Holm, Jens Kai; Henriksen, Ulrik Birk; Hustad, Johan Einar

    2005-01-01

    Pelletizing experiments along with modelling of the pelletizing process have been carried out with the aim of understanding the fundamental physico-chemical mechanisms that control the quality and durability of biomass pellets. A small-scale California pellet mill (25 kg/h) located with the Biomass...

  2. Fusion characterization of biomass ash

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Teng [State Key Laboratory ofMultiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, No. 1 Zhongguancun North Second Street, Beijing 100190 (China); Sino-Danish Center for Education and Research, Beijing, 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Fan, Chuigang; Hao, Lifang [State Key Laboratory ofMultiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, No. 1 Zhongguancun North Second Street, Beijing 100190 (China); Li, Songgeng, E-mail: sgli@ipe.ac.cn [State Key Laboratory ofMultiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, No. 1 Zhongguancun North Second Street, Beijing 100190 (China); Song, Wenli [State Key Laboratory ofMultiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, No. 1 Zhongguancun North Second Street, Beijing 100190 (China); Lin, Weigang [State Key Laboratory ofMultiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, No. 1 Zhongguancun North Second Street, Beijing 100190 (China); Department of Chemical and Biochemical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark)

    2016-08-20

    Highlights: • A novel method is proposed to analyze fusion characteristics of biomass ash. • T{sub m} can represent the severe melting temperature of biomass ash. • Compared with AFT, TMA is the better choice to analyze the fusion characteristics of biomass ash. - Abstract: The ash fusion characteristics are important parameters for thermochemical utilization of biomass. In this research, a method for measuring the fusion characteristics of biomass ash by Thermo-mechanical Analyzer, TMA, is described. The typical TMA shrinking ratio curve can be divided into two stages, which are closely related to ash melting behaviors. Several characteristics temperatures based on the TMA curves are used to assess the ash fusion characteristics. A new characteristics temperature, T{sub m}, is proposed to represent the severe melting temperature of biomass ash. The fusion characteristics of six types of biomass ash have been measured by TMA. Compared with standard ash fusibility temperatures (AFT) test, TMA is more suitable for measuring the fusion characteristics of biomass ash. The glassy molten areas of the ash samples are sticky and mainly consist of K-Ca-silicates.

  3. Forest biomass-based energy

    Science.gov (United States)

    Janaki R. R. Alavalapati; Pankaj Lal; Andres Susaeta; Robert C. Abt; David N. Wear

    2013-01-01

    Key FindingsHarvesting woody biomass for use as bioenergy is projected to range from 170 million to 336 million green tons by 2050, an increase of 54 to 113 percent over current levels.Consumption projections for forest biomass-based energy, which are based on Energy Information Administration projections, have a high level of...

  4. Refining fast pyrolysis of biomass

    NARCIS (Netherlands)

    Westerhof, Roel Johannes Maria

    2011-01-01

    Pyrolysis oil produced from biomass is a promising renewable alternative to crude oil. Such pyrolysis oil has transportation, storage, and processing benefits, none of which are offered by the bulky, inhomogeneous solid biomass from which it originates. However, pyrolysis oil has both a different

  5. Woody biomass logistics [Chapter 14

    Science.gov (United States)

    Robert Keefe; Nathaniel Anderson; John Hogland; Ken Muhlenfeld

    2014-01-01

    The economics of using woody biomass as a fuel or feedstock for bioenergy applications is often driven by logistical considerations. Depending on the source of the woody biomass, the acquisition cost of the material is often quite low, sometimes near zero. However, the cost of harvesting, collection, processing, storage, and transportation from the harvest site to end...

  6. Mit1 Transcription Factor Mediates Methanol Signaling and Regulates the Alcohol Oxidase 1 (AOX1) Promoter in Pichia pastoris.

    Science.gov (United States)

    Wang, Xiaolong; Wang, Qi; Wang, Jinjia; Bai, Peng; Shi, Lei; Shen, Wei; Zhou, Mian; Zhou, Xiangshan; Zhang, Yuanxing; Cai, Menghao

    2016-03-18

    The alcohol oxidase 1 (AOX1) promoter (P AOX1) of Pichia pastoris is the most powerful and commonly used promoter for driving protein expression. However, mechanisms regulating its transcriptional activity are unclear. Here, we identified a Zn(II)2Cys6-type methanol-induced transcription factor 1 (Mit1) and elucidated its roles in regulating PAOX1 activity in response to glycerol and methanol. Mit1 regulated the expression of many genes involved in methanol utilization pathway, including AOX1, but did not participate in peroxisome proliferation and transportation of peroxisomal proteins during methanol metabolism. Structural analysis of Mit1 by performing domain deletions confirmed its specific and critical role in the strict repression of P AOX1 in glycerol medium. Importantly, Mit1, Mxr1, and Prm1, which positively regulated P AOX1 in response to methanol, were bound to P AOX1 at different sites and did not interact with each other. However, these factors cooperatively activated P AOX1 through a cascade. Mxr1 mainly functioned during carbon derepression, whereas Mit1 and Prm1 functioned during methanol induction, with Prm1 transmitting methanol signal to Mit1 by binding to the MIT1 promoter (P MIT1), thus increasingly expressing Mit1 and subsequently activating P AOX1. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  7. Biomass plantations - energy farming

    Energy Technology Data Exchange (ETDEWEB)

    Paul, S.

    1981-02-01

    Mounting oil import bills in India are restricting her development programmes by forcing the cutting down of the import of other essential items. But the countries of the tropics have abundant sunlight and vast tracts of arable wastelands. Energy farming is proposed in the shape of energy plantations through forestry or energy cropping through agricultural media, to provide power fuels for transport and the industries and also to provide fuelwoods for the domestic sector. Short rotation cultivation is discussed and results are given of two main species that are being tried, ipil-ipil and Casuarina. Evaluations are made on the use of various crops such as sugar cane, cassava and kenaf as fuel crops together with hydrocarbon plants and aquatic biomass. (Refs. 20)

  8. Communal biomass conversion plants

    International Nuclear Information System (INIS)

    Holm-Nielsen, J.B.; Huntingford, S.; Halberg, N.

    1993-03-01

    The aim was to show the agricultural advantages of farmers being in connection with Communal Biogas Plant. Whether a more environmentally protectire distribution of plant nutrients from animal manure takes place through a biogas plants distribution system, whether the nitrogen in the digested slurry is better utilized and whether the connection results in slurry transportation-time reduction, are discussed. The average amount of nitrogen from animal manure used per hectare was reduced. The area of manure distribution was larger. The nitrogen efficiency was increased when using digested slurry and purchase of N mineral fertilizer decreased, resulting in considerable reduction in nitrogen leaching. The amount of slurry delivered to the local storage tanks was approximately 45 per cent of the total amount treated on the biogas plant. Conditions of manure transport improved greatly as this was now the responsibility of the communal biomass conversion plant administrators. (AB) (24 refs.)

  9. Biomass as a modern fuel

    International Nuclear Information System (INIS)

    Hall, D.O.; House, J.

    1994-01-01

    Case studies are presented for several developed and developing countries. Constraints involved in modernising biomass energy and the potential for turning them into entrepreneurial opportunities are discussed. It is concluded that the long term impacts of biomass programmes and projects depend mainly on ensuring sustainability, flexibility and replicability while taking account of local conditions and providing multiple benefits. Implementation of biomass projects requires governmental policy initiatives that will internalise the external economic, social and environmental costs of conventional fuel sources so that biomass fuels can become competitive on a ''level playing field''. Policies are also required to encourage R and D and commercialisation of biomass energy programs in close co-ordination with the private sector. (author)

  10. Biomass in Switzerland. Energy production

    International Nuclear Information System (INIS)

    Guggisberg, B.

    2006-01-01

    In the long term, biomass could be used for energy production in a three times more intensive way, compared to current figures. A major contribution would be delivered to Switzerland's energy supply. Numerous biomass conversion technologies do exist, for the production of heat, power or vehicle fuel. However, the implementation of such a large-scale utilisation of biomass requires a couple of strategic decisions in order to improve the framework conditions for biomass development and precisely target the supporting measures applicable to both research and pilot plants. In short, a clear and efficient strategy is necessary in what regards biomass, that will be used for the definition of a future catalogue of measures. (author)

  11. Fusion characterization of biomass ash

    DEFF Research Database (Denmark)

    Ma, Teng; Fan, Chuigang; Hao, Lifang

    2016-01-01

    The ash fusion characteristics are important parameters for thermochemical utilization of biomass. In this research, a method for measuring the fusion characteristics of biomass ash by Thermo-mechanical Analyzer, TMA, is described. The typical TMA shrinking ratio curve can be divided into two...... stages, which are closely related to ash melting behaviors. Several characteristics temperatures based on the TMA curves are used to assess the ash fusion characteristics. A new characteristics temperature, Tm, is proposed to represent the severe melting temperature of biomass ash. The fusion...... characteristics of six types of biomass ash have been measured by TMA. Compared with standard ash fusibility temperatures (AFT) test, TMA is more suitable for measuring the fusion characteristics of biomass ash. The glassy molten areas of the ash samples are sticky and mainly consist of K-Ca-silicates....

  12. Conditioning biomass for microbial growth

    Science.gov (United States)

    Bodie, Elizabeth A; England, George

    2015-03-31

    The present invention relates to methods for improving the yield of microbial processes that use lignocellulose biomass as a nutrient source. The methods comprise conditioning a composition comprising lignocellulose biomass with an enzyme composition that comprises a phenol oxidizing enzyme. The conditioned composition can support a higher rate of growth of microorganisms in a process. In one embodiment, a laccase composition is used to condition lignocellulose biomass derived from non-woody plants, such as corn and sugar cane. The invention also encompasses methods for culturing microorganisms that are sensitive to inhibitory compounds in lignocellulose biomass. The invention further provides methods of making a product by culturing the production microorganisms in conditioned lignocellulose biomass.

  13. Treatment of biomass to obtain fermentable sugars

    Science.gov (United States)

    Dunson, Jr., James B.; Tucker, Melvin [Lakewood, CO; Elander, Richard [Evergreen, CO; Hennessey, Susan M [Avondale, PA

    2011-04-26

    Biomass is pretreated using a low concentration of aqueous ammonia at high biomass concentration. Pretreated biomass is further hydrolyzed with a saccharification enzyme consortium. Fermentable sugars released by saccharification may be utilized for the production of target chemicals by fermentation.

  14. A review of biomass energy potential

    International Nuclear Information System (INIS)

    Hoi Why Kong.

    1995-01-01

    This article reviews some recent development in biomass utilisation systems in Malaysia. The technology reviewed are direct combustion of biomass , wood briquetting technology, pyrolysis of biomass and gasification of wood in Malaysia

  15. The knockdown of OsVIT2 and MIT affects iron localization in rice seed.

    Science.gov (United States)

    Bashir, Khurram; Takahashi, Ryuichi; Akhtar, Shamim; Ishimaru, Yasuhiro; Nakanishi, Hiromi; Nishizawa, Naoko K

    2013-11-20

    The mechanism of iron (Fe) uptake in plants has been extensively characterized, but little is known about how Fe transport to different subcellular compartments affects Fe localization in rice seed. Here, we discuss the characterization of a rice vacuolar Fe transporter 2 (OsVIT2) T-DNA insertion line (osvit2) and report that the knockdown of OsVIT2 and mitochondrial Fe transporter (MIT) expression affects seed Fe localization. osvit2 plants accumulated less Fe in their shoots when grown under normal or excess Fe conditions, while the accumulation of Fe was comparable to that in wild-type (WT) plants under Fe-deficient conditions. The accumulation of zinc, copper, and manganese also changed significantly in the shoots of osvit2 plants. The growth of osvit2 plants was also slow compared to that of WT plants. The concentration of Fe increased in osvit2 polished seeds. Previously, we reported that the expression of OsVIT2 was higher in MIT knockdown (mit-2) plants, and in this study, the accumulation of Fe in mit-2 seeds decreased significantly. These results suggest that vacuolar Fe trafficking is important for plant Fe homeostasis and distribution, especially in plants grown in the presence of excess Fe. Moreover, changes in the expression of OsVIT2 and MIT affect the concentration and localization of metals in brown rice as well as in polished rice seeds.

  16. Catalytic routes from biomass to fuels

    DEFF Research Database (Denmark)

    Riisager, Anders

    2014-01-01

    chain unaffected. This presentation will survey the status of biofuels production from different sources, and discuss the sustainability of making transportation fuels from biomass. Furthermore, recently developed chemocatalytic technologies that allow efficient conversion of lignocellulosic biomass...... the chemical industry to find new feasible chemocatalytic routes to convert the components of lignocellulosic plant biomass (green biomass) as well as aquatic biomass (blue biomass) into potential platform chemicals that can replace the fossil based chemicals in order to leave the chemical supply and value...

  17. EnerGEO biomass pilot

    International Nuclear Information System (INIS)

    Tum, M.; Guenther, K.P.; McCallum, I.; Balkovic, J.; Khabarov, N.; Kindermann, G.; Leduc, S.; Biberacher, M.

    2013-01-01

    In the framework of the EU FP7 project EnerGEO (Earth Observations for Monitoring and Assessment of the Environmental Impact of Energy Use) sustainable energy potentials for forest and agricultural areas were estimated by applying three different model approaches. Firstly, the Biosphere Energy Transfer Hydrology (BETHY/DLR) model was applied to assess agricultural and forest biomass increases on a regional scale with the extension to grassland. Secondly, the EPIC (Environmental Policy Integrated Climate) - a cropping systems simulation model - was used to estimate grain yields on a global scale and thirdly the Global Forest Model (G4M) was used to estimate global woody biomass harvests and stock. The general objective of the biomass pilot is to implement the observational capacity for using biomass as an important current and future energy resource. The scope of this work was to generate biomass energy potentials for locations on the globe and to validate these data. Therefore, the biomass pilot was focused to use historical and actual remote sensing data as input data for the models. For validation purposes, forest biomass maps for 1987 and 2002 for Germany (Bundeswaldinventur (BWI-2)) and 2001 and 2008 for Austria (Austrian Forest Inventory (AFI)) were prepared as reference. (orig.)

  18. EnerGEO biomass pilot

    Energy Technology Data Exchange (ETDEWEB)

    Tum, M.; Guenther, K.P. [German Aerospace Center (DLR), Wessling (Germany). German Remote Sensing Data Center (DFD); McCallum, I.; Balkovic, J.; Khabarov, N.; Kindermann, G.; Leduc, S. [International Institute for Applied Systems Analysis (IIASA), Laxenburg (Austria); Biberacher, M. [Research Studios Austria AG (RSA), Salzburg (Austria)

    2013-07-01

    In the framework of the EU FP7 project EnerGEO (Earth Observations for Monitoring and Assessment of the Environmental Impact of Energy Use) sustainable energy potentials for forest and agricultural areas were estimated by applying three different model approaches. Firstly, the Biosphere Energy Transfer Hydrology (BETHY/DLR) model was applied to assess agricultural and forest biomass increases on a regional scale with the extension to grassland. Secondly, the EPIC (Environmental Policy Integrated Climate) - a cropping systems simulation model - was used to estimate grain yields on a global scale and thirdly the Global Forest Model (G4M) was used to estimate global woody biomass harvests and stock. The general objective of the biomass pilot is to implement the observational capacity for using biomass as an important current and future energy resource. The scope of this work was to generate biomass energy potentials for locations on the globe and to validate these data. Therefore, the biomass pilot was focused to use historical and actual remote sensing data as input data for the models. For validation purposes, forest biomass maps for 1987 and 2002 for Germany (Bundeswaldinventur (BWI-2)) and 2001 and 2008 for Austria (Austrian Forest Inventory (AFI)) were prepared as reference. (orig.)

  19. Sustainability of biomass for cofiring

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-02-01

    There are many items to include when considering the sustainability of biomass for cofiring, and some of them are hard to quantify. The focus of this report is on the greenhouse gas emission aspects of sustainability. The reduction of greenhouse gas emissions achieved by substituting biomass for coal depends on a number of factors such as the nature of the fossil fuel reference system, the source of the biomass, and how it is produced. Relevant issues in biomass production include the energy balance, the greenhouse gas balance, land use change, non-CO2 greenhouse gas emission from soils, changes to soil organic carbon, and the timing of emissions and removal of CO2 which relates to the scale of biomass production. Certification of sustainable biomass is slow to emerge at the national and international level, so various organisations are developing and using their own standards for sustainable production. The EU does not yet have sustainability standards for solid biomass, but the UK and Belgium have developed their own.

  20. MITR-III: Upgrade and relicensing studies for the MIT Research Reactor. Second annual report

    International Nuclear Information System (INIS)

    Trosman, H.G.; Lanning, D.D.; Harling, O.K.

    1994-08-01

    The current operating license of the MIT research reactor will expire on May 7, 1996 or possibly a few years later if the US Nuclear Regulatory Commission agrees that the license period can start with the date of initial reactor operation. Driven by the imminent expiration of the operating license, a team of nuclear engineering staff and students have begun a study of the future options for the MIT Research Reactor. These options have included the range from a major rebuilding of the reactor to its decommissioning. This document reports the results of a two year intensive activity which has been supported by a $148,000 grant from the USDOE contract Number DEFG0293ER75859, approximately $100,000 of internal MIT funds and Nuclear Engineering Department graduate student fellowships as well as assistance from international visiting scientists and engineers

  1. MIT Clean Energy Prize: Final Technical Report May 12, 2010 - May 11, 2011

    Energy Technology Data Exchange (ETDEWEB)

    Snyder, Chris [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Campbell, Georgina [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Salony, Jason [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Aulet, Bill [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2011-08-09

    The MIT Clean Energy Prize (MIT CEP) is a venture creation and innovation competition to encourage innovation in the energy space, specifically with regard to clean energy. The Competition invited student teams from any US university to submit student-led ventures that demonstrate a high potential of successfully making clean energy more affordable, with a positive impact on the environment. By focusing on student ventures, the MIT CEP aims to educate the next generation of clean energy entrepreneurs. Teams receive valuable mentoring and hard deadlines that complement the cash prize to accelerate development of ventures. The competition is a year-long educational process that culminates in the selection of five category finalists and a Grand Prize winner and the distribution of cash prizes to each of those teams. Each entry was submitted in one of five clean energy categories: Renewables, Clean Non-Renewables, Energy Efficiency, Transportation, and Deployment.

  2. An Approach for Prevention of MitM Attack Based on Rogue AP in Wireless Network

    Directory of Open Access Journals (Sweden)

    Zhendong Wu

    2014-12-01

    Full Text Available With the rapid development of WLAN, more and more schools and businesses have begun to provide the WLAN for users. However, WLAN is considerably more susceptible to MitM (man- in-the-middle attack. To overcome it, we propose a dynamic password technology named Two-way Dynamic Authentication Technology (TDAT. It uses two-factor during the initial authentication, and uses a two-way hash chain during the cross-domain authentication. TDAT effectively protects users' authentication credentials and improves users' experience. In an actual wireless network environment, we implement a MitM attack framework based on Rogue AP. Then we effectively prevent this MitM attack by using TDAT. Moreover we analyze the security of TDAT by using BAN logic.

  3. Plankton composition and biomass development

    DEFF Research Database (Denmark)

    Jakobsen, H.H.; Jepsen, P.M.; Blanda, E.

    2016-01-01

    Plankton food web dynamics were studied during a complete production season in a semi-intensive land-based facility for rearing of turbot (Scophthalmus maximus) larvae. The production season was divided into three production cycles of 3–5 weeks. Phytoplankton biomass (using chlorophyll a as biomass...... proxy) peaked in each production cycle. However, the maximum biomass decreased from spring (18 μg chlorophyll a L−1) to fall (ca. 7 μg chlorophyll a L−1), simultaneous with a decline in the concentration of dissolved nitrogen in the inoculating water. During the three production cycles, we observed...

  4. Bearings for the biomass boom

    Energy Technology Data Exchange (ETDEWEB)

    MacQueen, Duncan

    2011-03-15

    Biomass energy is booming –– more than two billion people depend on biomass for their energy and the International Energy Agency predicts that biomass' share of the global energy supply will treble by 2050. But in many developing countries it is still regarded as a traditional and dirty solution that is often criminalised, unsustainable and poorly paid. A more sophisticated approach that legalises and secures sustainable production by and for local people could help improve energy security, cut carbon emissions, protect forests and reduce poverty.

  5. Liquid biofuels from blue biomass

    DEFF Research Database (Denmark)

    Kádár, Zsófia; Jensen, Annette Eva; Bangsø Nielsen, Henrik

    2011-01-01

    Marine (blue) biomasses, such as macroalgaes, represent a huge unexploited amount of biomass. With their various chemical compositions, macroalgaes can be a potential substrate for food, feed, biomaterials, pharmaceuticals, health care products and also for bioenergy. Algae use seawater as a growth...... medium, light as energy source and they capture CO2 for the synthesis of new organic material, thus can grow on non-agricultural land, without increasing food prices, or using fresh water. Due to all these advantages in addition to very high biomass yield with high carbohydrate content, macroalgaes can...

  6. Biomass combustion gas turbine CHP

    Energy Technology Data Exchange (ETDEWEB)

    Pritchard, D.

    2002-07-01

    This report summarises the results of a project to develop a small scale biomass combustor generating system using a biomass combustor and a micro-gas turbine indirectly fired via a high temperature heat exchanger. Details are given of the specification of commercially available micro-turbines, the manufacture of a biomass converter, the development of a mathematical model to predict the compatibility of the combustor and the heat exchanger with various compressors and turbines, and the utilisation of waste heat for the turbine exhaust.

  7. Biomass catalysis and solvents; Biomasse catalyse et solvants

    Energy Technology Data Exchange (ETDEWEB)

    Pioch, D [CIRAD-AMIS, programme Agro-Alimentaire, 34 - Montpellier (France); Pouilloux, Y; Barrault, J [Centre National de la Recherche Scientifique (CNRS UMR 6503), ESIP, Lab. de Catalyse en Chimie Organique, 86 - Poitiers (France); and others

    2000-07-01

    How to develop new technics and products and at the same time to respect the environment? The biomass seems to be an interesting domain in this framework and this document allows the selection of performing products obtain by biomass. Among these products the solvents economic and environmental advantages or consequences are discussed. A great part is also devoted to the voc emissions, bound to the solvents.

  8. Long-lived mitochondrial (Mit) mutants of Caenorhabditis elegans utilize a novel metabolism.

    Science.gov (United States)

    Butler, Jeffrey A; Ventura, Natascia; Johnson, Thomas E; Rea, Shane L

    2010-12-01

    The Caenorhabditis elegans mitochondrial (Mit) mutants have disrupted mitochondrial electron transport chain (ETC) functionality, yet, surprisingly, they are long lived. We have previously proposed that Mit mutants supplement their energy needs by exploiting alternate energy production pathways normally used by wild-type animals only when exposed to hypoxic conditions. We have also proposed that longevity in the Mit mutants arises as a property of their new metabolic state. If longevity does arise as a function of metabolic state, we would expect to find a common metabolic signature among these animals. To test these predictions, we established a novel approach monitoring the C. elegans exometabolism as a surrogate marker for internal metabolic events. Using HPLC-ultraviolet-based metabolomics and multivariate analyses, we show that long-lived clk-1(qm30) and isp-1(qm150) Mit mutants have a common metabolic profile that is distinct from that of aerobically cultured wild-type animals and, unexpectedly, wild-type animals cultured under severe oxygen deprivation. Moreover, we show that 2 short-lived mitochondrial ETC mutants, mev-1(kn1) and ucr-2.3(pk732), also share a common metabolic signature that is unique. We show that removal of soluble fumarate reductase unexpectedly increases health span in several genetically defined Mit mutants, identifying at least 1 alternate energy production pathway, malate dismutation, that is operative in these animals. Our study suggests long-lived, genetically specified Mit mutants employ a novel metabolism and that life span may well arise as a function of metabolic state.

  9. The R Package MitISEM: Efficient and Robust Simulation Procedures for Bayesian Inference

    Directory of Open Access Journals (Sweden)

    Nalan Baştürk

    2017-07-01

    Full Text Available This paper presents the R package MitISEM (mixture of t by importance sampling weighted expectation maximization which provides an automatic and flexible two-stage method to approximate a non-elliptical target density kernel - typically a posterior density kernel - using an adaptive mixture of Student t densities as approximating density. In the first stage a mixture of Student t densities is fitted to the target using an expectation maximization algorithm where each step of the optimization procedure is weighted using importance sampling. In the second stage this mixture density is a candidate density for efficient and robust application of importance sampling or the Metropolis-Hastings (MH method to estimate properties of the target distribution. The package enables Bayesian inference and prediction on model parameters and probabilities, in particular, for models where densities have multi-modal or other non-elliptical shapes like curved ridges. These shapes occur in research topics in several scientific fields. For instance, analysis of DNA data in bio-informatics, obtaining loans in the banking sector by heterogeneous groups in financial economics and analysis of education's effect on earned income in labor economics. The package MitISEM provides also an extended algorithm, 'sequential MitISEM', which substantially decreases computation time when the target density has to be approximated for increasing data samples. This occurs when the posterior or predictive density is updated with new observations and/or when one computes model probabilities using predictive likelihoods. We illustrate the MitISEM algorithm using three canonical statistical and econometric models that are characterized by several types of non-elliptical posterior shapes and that describe well-known data patterns in econometrics and finance. We show that MH using the candidate density obtained by MitISEM outperforms, in terms of numerical efficiency, MH using a simpler

  10. Energy from biomass

    Energy Technology Data Exchange (ETDEWEB)

    Parker, K.J. (Tate and Lyle, Ltd., Reading, England); Vlitos, A.J.; Coombs, J.

    1983-09-01

    The most-abundant biomass is wood, of which cellulose is a major component. Burning releases directly as heat, solar energy which has been stored in the wood as a result of the process of photosynthesis. It is also possible to convert cellulose to simple sugars which may be fermented to ethanol, a more convenient source of energy as a fuel for internal combustion engines; alternatively, wood may be gasified at high temperature in the presence of steam. The resulting synthesis gas can be catalytically converted into methanol. Neither route to a liquid fuel from cellulosic residues has yet been proved economically feasible. However, alcoholic fermentation of sugar, or glucose obtained by the hydrolysis of starch may provide a commercially viable process for the production of fuel alcohol. Both sugar and starch are agricultural food products which are obtained from cane sugar, maize and cassava. Other sources of fermentable sugars and starch include pineapple, sweet sorghum, sago palm, yams and other root crops. The energy input required to grow and process agricultural products may be greater than the energy yield in the form of anhydrous fermentation alcohol. As a consequence, only sugar cane and possibly sweet sorghum can be regarded as giving a net positive energy yield. Maize and, on a more-limited scale, cassava, may provide a viable process, given an additional source of low-grade energy, as is evident from the successful exploitation of these crops for fuel-alcohol production in the US and Brazil. 31 references, 12 figures, 3 tables.

  11. France looks to biomass

    Energy Technology Data Exchange (ETDEWEB)

    1982-03-22

    France's Solar Energy Commission has announced a series of measures it is backing to increase the country's production of energy from biomass. Following consultations on suitable equipment, it has decided to go ahead with experiments of 15 systems designed to produce methane from animal wastes. Its eventual target is the production of between 1 million and 1.5 million tons per year of oil equivalent (toe) from this source. Secondly, it has launched a tender for the supply of domestic and industrial heating equipment capable of functioning on straw. It has calculated that the amount of straw available for this end use is in the region of 6 million ton per year, equivalent to about 2 million tons per year toe. Finally, tests are to be carried out in 14 different areas to determine the best variety of Jerusalem artichoke for the production of ethanol. Together with the Institut Francais du Petrole the Commission is building a demonstration unit for the production of acetone/butyric acid by fermentation of sugars from Jerusamlem artichoke and beet roots.

  12. Sorghums: viable biomass candidates

    Energy Technology Data Exchange (ETDEWEB)

    McClure, T A; Arthur, M F; Kresovich, S; Scantland, D A

    1980-01-01

    Agronomic studies conducted at Battelle's Columbus Division to evaluate biomass and sugar yields of sweet sorghum are described and the major findings are summarized. Development opportunities for using sorghum cultivars as a large-scale energy crop are discussed. With presently available cultivars, sweet sorghum should produce 3500 to 4000 liters ethanol per hectare from the fermentable sugars alone. Conversion of the stalk fibers into alcohol could increase production by another 1600 to 1900 liters per hectare with existing cultivars. These yields are approximately 30 to 40% greater per hectare than would be obtained from above average yields of grain and stalk fiber with corn. There is reason to believe, that with hybrid sweet sorghum, these yields could be further increased by as much as 30%. Diminishing land availability for agricultural crops necessitates that maximum yields be obtained. Over the next decade, imaginative technological innovations in sorghum harvesting, processing, and crop preservation, coupled with plant breeding research should help this crop realize its full potential as a renewable resource for energy production.

  13. Bio energy: Production of Biomass; Produksjon av biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Noreng, Katrina; Indergaard, Mentz; Liodden, Ole Joergen; Hohle, Erik Eid; Sandberg, Eiliv

    2001-07-01

    This is Chapter 2 of the book ''Bio energy - Environment, technique and market''. Its main sections are: (1) Biomass resources in Norway, (2) The foundation - photosynthesis, (3) Biomass from forestry, (4) Biomass from peat lands, (5) Biomass from agriculture and (6) Biomass from lakes and sea. The exposition largely describes the conditions in Norway, where the use of bio energy can be increased from 15 TWh to 35 TWh using available technology. At present, water-borne heating systems are not extensively used in Norway and 30% of the biomass that is cut in the forests remains there as waste. Using this waste for energy generation would not only contribute to reduce the emission of greenhouse gases, but would often lead to improved forest rejuvenation. Use of a few per thousand of the Norwegian peat lands would produce 2 - 3 TWh. According to calculations, along the coast of Norway, there are at least 15 mill tonnes of kelp and sea tangle and these resources can be utilized in a sustainable way.

  14. Initiation of a phase-I trial of neutron capture therapy at the MIT research reactor

    International Nuclear Information System (INIS)

    Harling, O.K.; Bernard, J.A.; Yam, Chun-Shan

    1995-01-01

    The Massachusetts Institute of Technology (MIT), the New England Medical Center (NEMC), and Boston University Medical Center (BUMC) initiated a phase-1 trial of boron neutron capture therapy (BNCT) on September 6, 1994, at the 5-MW(thermal) MIT research reactor (MITR). A novel form of experimental cancer therapy, BNCT is being developed for certain types of highly malignant brain tumors such as glioblastoma and melanoma. The results of the phase-1 trials on patients with tumors in the legs or feet are described

  15. Rehkitzrettung mit dem Fliegenden Wildretter: Erfahrungen der ersten Feldeinsätze

    OpenAIRE

    Wimmer, Tilman; Israel, Martin; Haschberger, Peter; Weimann, Anita

    2013-01-01

    Der Fliegende Wildretter des Deutschen Zentrums für Luft- und Raumfahrt ist als prototypische Kleinserie seit dem Jahr 2010 erfolgreich in Deutsch-land und Österreich im Einsatz, um aus der Luft Wildtiere während der Wiesenmahd aufzuspüren, und diese so vor dem Tod durch das Mähwerk zu retten. Der Prototyp basiert auf einem ferngesteuerten Multikopter, der mit mehreren Kameras ausgestattet ist und damit im Flug zuverlässiger und wesentlich schneller Wildtiere er-kennen kann, als dies mit b...

  16. Verbesserte Visualisierung der Koronararterien in MSCT-Daten mit direkter Vergleichbarkeit zur Angiographie

    Science.gov (United States)

    Lacalli, Christina; Jähne, Marion; Wesarg, Stefan

    In diesem Beitrag stellen wir neue, automatisierte Verfahren zur Visualisierung der Koronararterien einerseits und für eine direkte Vergleichbarkeit mit konventionellen Angiogrammen andererseits vor. Unser Ansatz umfasst Methoden für die automatische Extraktion des Herzens aus kontrastverstärkten CT-Daten, sowie für die Maskierung grosser kontrastmittelgefüllter Kavitäten des Herzens, um die Sichtbarkeit der Koronararterien bei der Darstellung mittels Volumenrendering zu verbessern. Zum direkten Vergleich mit konventionellen Angiographien wurde ein Verfahren zur automatischen Generierung von Projektionsansichten aus den CT-Daten entwickelt.

  17. Therapie einer postoperativ entstandenen zystischen Raumforderung mit Picibanil (OK-432): Ein Fallbericht

    OpenAIRE

    Schlüter, A; Weller, P; Mattheis, S; Lang, S

    2014-01-01

    Einleitung: Picibanil (=OK432) ist ein Lysat bestehend aus Penicillin G und mit H2O2 attenuiertem Streptococcus pyogenes. In den letzten Jahrzehnten wurde Picibanil zur Therapie von Pleuraergüssen, Lymphangiomen, Chylusfisteln, medianen Halszysten und Ranulae eingesetzt. Es verursacht eine Immunreaktion mit aseptischer Entzündung. Dies führt zu einer Zerstörung des Endothels und konsekutiv zu einer Verklebung und Schrumpfung des Zystensacks.Falldarstellung: Wir berichten über einen 40-jähri...

  18. Mit1 Transcription Factor Mediates Methanol Signaling and Regulates the Alcohol Oxidase 1 (AOX1) Promoter in Pichia pastoris*

    Science.gov (United States)

    Wang, Xiaolong; Wang, Qi; Wang, Jinjia; Bai, Peng; Shi, Lei; Shen, Wei; Zhou, Mian; Zhou, Xiangshan; Zhang, Yuanxing; Cai, Menghao

    2016-01-01

    The alcohol oxidase 1 (AOX1) promoter (PAOX1) of Pichia pastoris is the most powerful and commonly used promoter for driving protein expression. However, mechanisms regulating its transcriptional activity are unclear. Here, we identified a Zn(II)2Cys6-type methanol-induced transcription factor 1 (Mit1) and elucidated its roles in regulating PAOX1 activity in response to glycerol and methanol. Mit1 regulated the expression of many genes involved in methanol utilization pathway, including AOX1, but did not participate in peroxisome proliferation and transportation of peroxisomal proteins during methanol metabolism. Structural analysis of Mit1 by performing domain deletions confirmed its specific and critical role in the strict repression of PAOX1 in glycerol medium. Importantly, Mit1, Mxr1, and Prm1, which positively regulated PAOX1 in response to methanol, were bound to PAOX1 at different sites and did not interact with each other. However, these factors cooperatively activated PAOX1 through a cascade. Mxr1 mainly functioned during carbon derepression, whereas Mit1 and Prm1 functioned during methanol induction, with Prm1 transmitting methanol signal to Mit1 by binding to the MIT1 promoter (PMIT1), thus increasingly expressing Mit1 and subsequently activating PAOX1. PMID:26828066

  19. ROE Carbon Storage - Forest Biomass

    Data.gov (United States)

    U.S. Environmental Protection Agency — This polygon dataset depicts the density of forest biomass in counties across the United States, in terms of metric tons of carbon per square mile of land area....

  20. Washington State biomass data book

    International Nuclear Information System (INIS)

    Deshaye, J.A.; Kerstetter, J.D.

    1991-07-01

    This is the first edition of the Washington State Biomass Databook. It assess sources and approximate costs of biomass fuels, presents a view of current users, identifies potential users in the public and private sectors, and lists prices of competing energy resources. The summary describes key from data from the categories listed above. Part 1, Biomass Supply, presents data increasing levels of detail on agricultural residues, biogas, municipal solid waste, and wood waste. Part 2, Current Industrial and Commercial Use, demonstrates how biomass is successfully being used in existing facilities as an alternative fuel source. Part 3, Potential Demand, describes potential energy-intensive public and private sector facilities. Part 4, Prices of Competing Energy Resources, shows current suppliers of electricity and natural gas and compares utility company rates. 49 refs., 43 figs., 72 tabs

  1. Fouling control in biomass boilers

    Energy Technology Data Exchange (ETDEWEB)

    Romeo, Luis M.; Gareta, Raquel [Centro de Investigacion de Recursos y Consumos Energeticos (CIRCE), Universidad de Zaragoza, Centro Politecnico Superior, Maria de Luna, 3, 50018 Zaragoza (Spain)

    2009-05-15

    One of the important challenges for biomass combustion in industrial applications is the fouling tendency and how it affects to the boiler performance. The classical approach for this question is to activate sootblowing cycles with different strategies to clean the boiler (one per shift, one each six hours..). Nevertheless, it has been often reported no effect on boiler fouling or an excessive steam consumption for sootblowing. This paper illustrates the methodology and the application to select the adequate time for activating sootblowing in an industrial biomass boiler. The outcome is a control strategy developed with artificial intelligence (Neural Network and Fuzzy Logic Expert System) for optimizing the biomass boiler cleaning and maximizing heat transfer along the time. Results from an optimize sootblowing schedule show savings up to 12 GWh/year in the case-study biomass boiler. Extra steam generation produces an average increase of turbine power output of 3.5%. (author)

  2. Biomass processing over gold catalysts

    CERN Document Server

    Simakova, Olga A; Murzin, Dmitry Yu

    2014-01-01

    The book describes the valorization of biomass-derived compounds over gold catalysts. Since biomass is a rich renewable feedstock for diverse platform molecules, including those currently derived from petroleum, the interest in various transformation routes has become intense. Catalytic conversion of biomass is one of the main approaches to improving the economic viability of biorefineries.  In addition, Gold catalysts were found to have outstanding activity and selectivity in many key reactions. This book collects information about transformations of the most promising and important compounds derived from cellulose, hemicelluloses, and woody biomass extractives. Since gold catalysts possess high stability under oxidative conditions, selective oxidation reactions were discussed more thoroughly than other critical reactions such as partial hydrogenation, acetalization, and isomerization. The influence of reaction conditions, the role of the catalyst, and the advantages and disadvantages of using gold are pre...

  3. Biomass energy in Central America

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, J M [Biomass Users` Network, Regional Office for Central America and the Caribbean, San Jose (Costa Rica)

    1995-12-01

    The objective of this paper is to introduce the concept of biomass to energy issues and opportunities in Central America. In this region, made up of seven countries (Belize, Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama), the biomass sector has the potential to play a crucial role in alleviating the environmental and development predicaments faced by all economies of the region. This paper assesses the available biomass resources at the regional and country levels and gives an overview of the current utilization of biomass fuels. It also describes the overall context in which the biomass-to-energy initiatives are immersed. At the regional level, biomass energy consumption accounts for more than 50% of total energy consumption. In regard to the utilization of biomass for energy purposes, it is clear that Central America faces a critical juncture at two levels, both mainly in rural areas: in the productive sector and at the household level. The absence of sustainable development policies and practices has jeopardized the availability of biomass fuels, particularly wood. Firewood is an important source of energy for rural industries such as coffee processing, which is one of the largest productive activities in the region. This paper comments on some of the most successful technological innovations already in place in the region, for instance, the rapid development of co-generation projects by the sugar cane industry, especially in El Salvador and Guatemala, the substitution of coffee husks for firewood in coffee processing plants in Costa Rica and El Salvador and the sustainable use of pine forests for co-generation in Honduras. Only one out of every two inhabitants in Central America now has access to electricity from the public grid. Biomass fuels, mainly firewood but also, to a lesser extent, other crop residues such as corn stalks, are the main source of energy for cooking and heating by most of the population. (It is foreseen that by the end

  4. Biomass energy in Central America

    International Nuclear Information System (INIS)

    Blanco, J.M.

    1995-01-01

    The objective of this paper is to introduce the concept of biomass to energy issues and opportunities in Central America. In this region, made up of seven countries (Belize, Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama), the biomass sector has the potential to play a crucial role in alleviating the environmental and development predicaments faced by all economies of the region. This paper assesses the available biomass resources at the regional and country levels and gives an overview of the current utilization of biomass fuels. It also describes the overall context in which the biomass-to-energy initiatives are immersed. At the regional level, biomass energy consumption accounts for more than 50% of total energy consumption. In regard to the utilization of biomass for energy purposes, it is clear that Central America faces a critical juncture at two levels, both mainly in rural areas: in the productive sector and at the household level. The absence of sustainable development policies and practices has jeopardized the availability of biomass fuels, particularly wood. Firewood is an important source of energy for rural industries such as coffee processing, which is one of the largest productive activities in the region. This paper comments on some of the most successful technological innovations already in place in the region, for instance, the rapid development of co-generation projects by the sugar cane industry, especially in El Salvador and Guatemala, the substitution of coffee husks for firewood in coffee processing plants in Costa Rica and El Salvador and the sustainable use of pine forests for co-generation in Honduras. Only one out of every two inhabitants in Central America now has access to electricity from the public grid. Biomass fuels, mainly firewood but also, to a lesser extent, other crop residues such as corn stalks, are the main source of energy for cooking and heating by most of the population. (It is foreseen that by the end

  5. Experiences with biomass in Denmark

    DEFF Research Database (Denmark)

    Gregg, Jay Sterling; Bolwig, Simon; Solér, Ola

    The Bioenergy Department in SENER have requested assistance with planning for the deployment of bioenergy (Biomass, biogas and waste incineration) in Mexico and information on Danish experiences with developing policy initiatives promoting bioenergy. This introduction to the Danish experiences...... with biomass use is compiled as preparation for SENER’s potential visit to Denmark in 2014. This report was prepared 19 June, 2014 by DTU System Analysis to Danish Energy Agency (DEA) as part of a frame contract agreement....

  6. Improved biomass Injera stove- Mirte

    International Nuclear Information System (INIS)

    Bess, M.; Kenna, J.

    1994-01-01

    The status report of 1994 - 1995 shows as the need to design an improved biomass stove for Injera was recognized. The marketing began in mid-1994 with a Mirte which showed even higher efficiencies in laboratory, using 50 percent less woody biomass than the open fire. By early 1994 several hundreds Mirte stoves had been sold in Addis Ababa at non-subsidized prices. The Mirte is currently produced on a large-scale by building materials companies. 3 figs. 1 tab

  7. Biogas from lignocellulosic biomass

    Energy Technology Data Exchange (ETDEWEB)

    Berglund Odhner, Peter; Schabbauer, Anna [Grontmij AB, Stockholm (Sweden); Sarvari Horvath, Ilona; Mohseni Kabir, Maryam [Hoegskolan i Boraas, Boraas (Sweden)

    2012-01-15

    Grontmij AB has cooperated with the University of Boraas to evaluate the technological and economical possibilities for biogas production from substrates containing lignocellulose, such as forest residues, straw and paper. The state of knowledge regarding biogas production from cellulosic biomass has been summarized. The research in the field has been described, especially focusing on pretreatment methods and their results on increased gas yields. An investigation concerning commercially available pretreatment methods and the cost of these technologies has been performed. An economic evaluation of biogas production from lignocellulosic materials has provided answers to questions regarding the profitability of these processes. Pretreatment with steam explosion was economically evaluated for three feedstocks - wood, straw and paper - and a combination of steam explosion and addition of NaOH for paper. The presented costs pertain to costs for the pretreatment step as it, in this study, was assumed that the pretreatment would be added to an existing plant and the lignocellulosic substrates would be part of a co-digestion process. The results of the investigation indicate that it is difficult to provide a positive net result when comparing the cost of pretreatment versus the gas yield (value) for two of the feedstocks - forest residues and straw. This is mainly due to the high cost of the raw material. For forest residues the steam pretreatment cost exceeded the gas yield by over 50 %, mainly due to the high cost of the raw material. For straw, the production cost was similar to the value of the gas. Paper showed the best economic result. The gas yield (value) for paper exceeded the pretreatment cost by 15 %, which makes it interesting to study paper further.

  8. Biomass and Solar Technologies Lauded | News | NREL

    Science.gov (United States)

    4 » Biomass and Solar Technologies Lauded News Release: Biomass and Solar Technologies Lauded July security and reduce our reliance on foreign sources of oil." The Enzymatic Hydrolysis of Biomass Cellulose to Sugars technology is expected to allow a wide range of biomass resources to be used to produce

  9. Energy from biomass and wastes 15

    International Nuclear Information System (INIS)

    Klass, D.L.

    1991-01-01

    This proceedings is contains 63 papers on the utilization of biomass as an energy source and as a source for materials. The specific topics discussed include: environmental issues, biomass production, biomass pretreatment and processing, chemicals and other products from biomass, fuel ethanol, thermal liquefaction, thermal gasification, combustion and power generation, and national programs. Individual papers are indexed separately

  10. Energy biomass and environment. The French programme

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The main themes of the french program for energy from biomass are presented: agriculture and forest products (short rotation plantations, waste products, etc.), enhancement of the biomass production, mobilization of biomass resources, biomass processing technics (biofuels, combustion processes, biotechnologies); vulgarization for diffusion of technics from laboratories to industry or domestic sectors.

  11. Biomass energy in the making

    International Nuclear Information System (INIS)

    Anon.

    2008-01-01

    Wood, straw, agricultural residues, organic wastes, biomass is everywhere you look. But the efficient use of this source of green electricity - the world's second largest renewable energy source - requires optimization of biomass collection and combustion processes. Biomass is back on the political agenda. In mid-June of this year, the French government gave this renewable energy a boost by selecting twenty-two projects to generate power and heat with biomass. The plants, to be commissioned by 2010, will be located in eleven different regions and will consume energy from organic plant matter. The power generated will be bought at a firm price of 128 euros per megawatt-hour. Most of the fuel will come from forest and paper industry waste, but straw and even grape pomace will be used in some cases. The plants will have a combined generating capacity of 300 MWh, raising France's installed biomass capacity to a total of 700 MWe. A drop of water in the ocean in the overall scheme of France's electricity. It is true that France has long neglected biomass. In 2004, electricity generated from biological resources represented a mere 1.74 TWhe in France, just 0.3% of its power consumption. This will rise to 0.6% once the new plants have come on line. The trend is the same in all of the EU's 27 member states, according to Eurostat, the statistical office of the European Communities: the amount of electricity generated from biomass (including biogas, municipal waste and wood) has practically doubled in six years, rising from 40 to 80 TWhe between 2000 and 2005. This is an improvement, but it still only represents 2.5% of the electricity supplied to Europeans. On a global scale, biomass contributes just 1% of total electric power generation. Yet biomass is an energy resource found all over the world, whether as agricultural waste, wood chips, or dried treatment plant sludge, to name but a few. Biomass power plants have managed to gain a foothold mainly in countries that produce

  12. Investigation for a chemical and physical description of different types of biomass; Untersuchung zur chemischen und physikalischen Beschreibung verschiedener Biomassen

    Energy Technology Data Exchange (ETDEWEB)

    Stuelpnagel, R [Kassel Univ. (Gesamthochschule), Witzenhausen (Germany). Inst. fuer Nutzpflanzenkunde

    1998-09-01

    If the same type of biomass is harvested at different times, preserved by different technques and then processed into fuel, the physical and chemical characteristics of the fuel will differ. After describing biomass fuel of the `wet line`, the author carried out investigations of lumpiness, bulk density and materials density of chopped materials in order to obtain a preliminary physical characterisation. Two samples of wood chips were characterized as well. The chemical description started with an analysis of nutrient content, acidity and concentrations of fermentation acids in the `wet line` biomass. (orig.) [Deutsch] Wird die gleiche Biomasse zu unterschiedlichen Zeitpunkten geerntet, auf verschiedenen Wegen konserviert und beim Feuchtgut mechanisch zu Brennstoff aufbereitet, so wird dies Einfluss auf die physikalischen und chemischen Charakteristika eines Brennstoffes nehmen. Nach einer ersten Beschreibung des Brennstoffes Biomasse aus der `Feuchtgutlinie` sollten durch Untersuchungen zur Stueckigkeit, Schuettdichte und Materialdichte von Haeckselgut aus beiden Verfahren eine erste physikalische Charakterisierung durchgefuehrt werden, in die auch zwei Proben von Holzhackschnitzeln einbezogen wurde. Mit der Analyse der Naehrstoffgehalte sowie der Aciditaet und der Gehalte an Gaersaeuren in den Biomassen aus der Feuchtgutlinie sollte die chemische Beschreibung begonnen werden. (orig.)

  13. eLearning in der Volksschule – ein Mehrwert? - Aspekte zu einem zukunftsorientierten Unterricht mit IKT

    Directory of Open Access Journals (Sweden)

    Ursula Dopplinger

    2011-09-01

    Full Text Available In einer Panelstudie wurde die Verbesserung der Schlüsselkompetenzen von Schülerinnen und Schülern durch eLearning in vier Volksschulen untersucht. Mit der verwendeten Webquest-Methode wurden bei drei von vier Untersuchten im Bereich der Schlüsselkompetenzen Erfolge erzielt.

  14. Renaissance des Mittelalters (Teil 1) : oder Alte Fragen mit Neuen Antworten

    NARCIS (Netherlands)

    drs. Frans van den Reep

    2014-01-01

    Man kann das Heute mit keiner Zeit vorher vergleichen? Zu schnell sind die Veränderungen, zu gravierend die technologischen Möglichkeiten der Digitalisierung, des Internets? Frans van der Reep nähert sich in vielen überraschenden Parallelen in der gesellschaftlichen Entwicklung dem Gestern und

  15. Crash tests with Smartcrash barriers, a technology with a future; Zukunftssichere Crashtests mit Smartcrash-Barrieren

    Energy Technology Data Exchange (ETDEWEB)

    Barz, D.; Evers, W. [Kistler Instrumente AG (Switzerland). Geschaeftsbereich Fahrzeugmesstechnik

    2005-02-01

    The Smartcrash barrier by Kistler is a completely new technology. State-of-the-art data processing with Microdau modules is combined with a singular mechanical modularity which meets all requirements of present and future crash standards. Together with a piezo measuring system perfectly tuned to the highly dynamic processes during crash tests, this provides a basis for making crash laboratories economically efficient, with safe and accurate data, and compatible with other measuring systems. The system is a 'must' for every modern crash laboratory. (orig.) [German] Die Smartcrash-Barriere von Kistler setzt in jeder Hinsicht Massstaebe. Neueste Technologie der Datenverarbeitung beim Crash mit Microdau-Modulen, wie sie auch in Dummys eingesetzt werden, wird mit einer einzigartigen mechanischen Modularitaet kombiniert, die alle erforderlichen Voraussetzungen fuer bestehende und zukuenftige Crash-Standards bietet. In Verbindung mit der fuer die Messung von hochdynamischen Kraftverlaeufen beim Crash praedestinierte Piezo-Messtechnik ist hiermit die Basis geschaffen, Crash-Laboratorien wirtschaftlich und hinsichtlich des Datenakquisition sicher und kompatibel mit anderen Messgroessen im Labor auszuruesten. Ein 'Muss' fuer jedes moderne Crash-Labor. (orig.)

  16. Pack also the sauna. Integration of electricity storage; Auch die Sauna mit rein. Einbindung von Stromspeichern

    Energy Technology Data Exchange (ETDEWEB)

    Ullrich, Sven

    2013-10-01

    The installers have to handle with a variety of variables and options to plan and integrate the correct personal use system of solar power systems for their customers. [German] Die Installateure muessen mit einer Vielzahl von Variablen und Varianten zurechtkommen, um das richtige Eigenverbrauchssystem einer Solarstromanlage fuer ihre Kunden zu planen und einzubauen.

  17. Underground storage with floating cover. An overview; Erdbeckenspeicher mit schwimmender Abdeckung. Eine Uebersicht

    Energy Technology Data Exchange (ETDEWEB)

    Heller, A.; Maureschat, G.; Duer, K. [Technical Univ. of Denmark, Lyngby (Denmark). Dept. of Buildings and Energy

    1998-12-31

    A number of underground stores have been developed in recent years in Denmark. The development has been subsidised with funds of `Development program renewable energy` launched by the Danish Ministry for Environment and Energy. First experience reports on underground storage show that more emphasis must be put on the development of storage sealing and cover construction. Hence research works currently focuses on the investigation of liner material and further development of floating cover constructions. The target is the development of underground storage using solar energy for heating that can compete with conventional heating systems technically and economically. (orig.) [Deutsch] In Daenemark hat man in den letzten Jahren eine Reihe von Erdbeckenspeichern entwickelt. Die Entwicklung wird mit Mitteln aus dem `Entwicklungsprogramm Erneuerbare Energie` vom daenischen Umwelt- und Energieministerium finanziell gefoerdert. Die ersten Erfahrungen mit Erdbeckenspeichern haben gezeigt, dass ein verstaerkter Einsatz bei der Entwicklung von Abdichtungen des Speichers und von Deckelkonstruktionen gefordert ist. Deshalb wird in Daenemark aktuell mit der Untersuchung von Linermaterialien und der Weiterentwicklung von schwimmenden Deckelkonstruktionen gearbeitet. Das Ziel dieser Arbeit ist es, Erdbeckenspeicher zu entwickeln, die die Ausnutzung von Sonnenenergie zur Waermeversorgung im Vergleich mit herkoemmlicher Waermeversorgung sowohl technisch als auch oekonomisch konkurrenzfaehig macht. (orig.)

  18. The R package MitISEM : efficient and robust simulation procedures for Bayesian inference

    NARCIS (Netherlands)

    Baştürk, N.; Grassi, S.; Hoogerheide, L.; Opschoor, A.; van Dijk, H.K.

    2015-01-01

    This paper presents the R package MitISEM (mixture of t by importance sampling weighted expectation maximization) which provides an automatic and flexible two-stage method to approximate a non-elliptical target density kernel - typically a posterior density kernel - using an adaptive mixture of

  19. MitBASE : a comprehensive and integrated mitochondrial DNA database. The present status

    NARCIS (Netherlands)

    Attimonelli, M.; Altamura, N.; Benne, R.; Brennicke, A.; Cooper, J. M.; D'Elia, D.; Montalvo, A.; Pinto, B.; de Robertis, M.; Golik, P.; Knoop, V.; Lanave, C.; Lazowska, J.; Licciulli, F.; Malladi, B. S.; Memeo, F.; Monnerot, M.; Pasimeni, R.; Pilbout, S.; Schapira, A. H.; Sloof, P.; Saccone, C.

    2000-01-01

    MitBASE is an integrated and comprehensive database of mitochondrial DNA data which collects, under a single interface, databases for Plant, Vertebrate, Invertebrate, Human, Protist and Fungal mtDNA and a Pilot database on nuclear genes involved in mitochondrial biogenesis in Saccharomyces

  20. Biogas - a new energy source saves fossil resources; Biogas - mit neuer Energie Ressourcen schonen

    Energy Technology Data Exchange (ETDEWEB)

    Thoss, C. (comp.)

    2001-07-01

    The new German Renewable Energy Sources Act (EEG) of 2000 made conditions for biogas more favourable - small wonder, as the German Biogas Association (Fachverband Biogas e.V.) co-operated with written expert opinions and many discussions with decision-makers. The subjects discussed at the 10th Biogas Conference reflect the current situation and will provide a basis for committee work in 2001. [German] Im Jahr 2000 haben sich die gesetzlichen Rahmenbedingungen fuer den Biogasbereich mit dem Inkrafttreten des erneuerbaren Energiegesetz (EEG) sehr positiv entwickelt. Der Fachverband Biogas e.V. hat mit schriftlichen Stellungnahmen und in vielen Gespraechen mit Entscheidungstraegern diese Bedingungen mitgestaltet. In Zukunft gibt es noch viele Aufgaben fuer eine effektive Interessenvertretung der Biogasbranche auf Laender- und Bundesebene. Die Themen, die auf der 10. Biogastagung diskutiert werden, spiegeln die Fragen wieder, die unter Experten derzeit intensiv diskutiert werden. Die Ergebnisse des Erfahrungsaustausches auf dieser Tagung werden die Grundlage fuer die Arbeit der Gremien im Fachverband Biogas im Jahr 2001 sein. Mit dem vorliegenden Tagungsband ist es gelungen, die Basis fuer die fachlichen Gespraeche waehrend und nach der Tagung schaffen. (orig.)

  1. Review of 'Where the action is, by Paul Dorish, MIT Press 2001

    DEFF Research Database (Denmark)

    Wentzer, Helle

    2008-01-01

    Bogen til human-computer interaction, HCI er ikke helt ny (MIT 2001/2004), men dog filosofisk aktuel som baggrund for nye tanker, forventninger og krav til sundhedsinformatikken. Den foranker forskningprogrammerne til ’tangible computing’ og ’social computing’ paradigmatisk i fænomenologien og...

  2. Evaluation of the MIT-Scan-T2 for non-destructive PCC pavement thickness determination.

    Science.gov (United States)

    2008-07-01

    The MIT-Scan-T2 device is marketed as a non-destructive way to determine pavement thickness on both : HMA and PCC pavements. PCC pavement thickness determination is an important incentivedisincentive : measurement for the Iowa DOT and contractors. Th...

  3. Schwerpunktseminar : "Dazugehören? Umgang mit Minderheiten" / Liliāna Vancāne

    Index Scriptorium Estoniae

    Vancāne, Liliāna

    2016-01-01

    17. -20. märtsini 2016 Tartus toimunud seminarist "Dazugehören? Umgang mit Minderheiten. Estland und Lettland gestern-heutu-morgen". Seminarist sotsiaalse kuuluvuse ja vähemuste teemal. Suurepäraselt korraldatud ürituse parim osa oli töötuba

  4. Pyrolytic sugars from cellulosic biomass

    Science.gov (United States)

    Kuzhiyil, Najeeb

    Sugars are the feedstocks for many promising advanced cellulosic biofuels. Traditional sugars derived from starch and sugar crops are limited in their availability. In principle, more plentiful supply of sugars can be obtained from depolymerization of cellulose, the most abundant form of biomass in the world. Breaking the glycosidic bonds between the pyranose rings in the cellulose chain to liberate glucose has usually been pursued by enzymatic hydrolysis although a purely thermal depolymerization route to sugars is also possible. Fast pyrolysis of pure cellulose yields primarily levoglucosan, an anhydrosugar that can be hydrolyzed to glucose. However, naturally occurring alkali and alkaline earth metals (AAEM) in biomass are strongly catalytic toward ring-breaking reactions that favor formation of light oxygenates over anhydrosugars. Removing the AAEM by washing was shown to be effective in increasing the yield of anhydrosugars; but this process involves removal of large amount of water from biomass that renders it energy intensive and thereby impractical. In this work passivation of the AAEM (making them less active or inactive) using mineral acid infusion was explored that will increase the yield of anhydrosugars from fast pyrolysis of biomass. Mineral acid infusion was tried by previous researchers, but the possibility of chemical reactions between infused acid and AAEM in the biomass appears to have been overlooked, possibly because metal cations might be expected to already be substantially complexed to chlorine or other strong anions that are found in biomass. Likewise, it appears that previous researchers assumed that as long as AAEM cations were in the biomass, they would be catalytically active regardless of the nature of their complexion with anions. On the contrary, we hypothesized that AAEM can be converted to inactive or less active salts using mineral acids. Various biomass feedstocks were infused with mineral (hydrochloric, nitric, sulfuric and

  5. Results of a demonstration experiment: Hydrogenation of pyrolysis oils from biomass; Ergebnisse eines Demonstrationsversuchs zur Hydrierung von Pyrolyseoelen aus Biomassen

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, M [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

    1998-09-01

    Sump phase hydrogenation is a technique specially developed for coal liquefaction; it provides a possibility of processing the liquid products of biomass pyrolyis into high-grade carburettor fuels. A demonstration experiment was carried out at the hydrogenation plant of DMT. The plant has a capacity of 10 kg/h. The technical feasibility of hydrogenation of biomass oils was demonstrated in a continuous experiment. The contribution describes the experimental conditions, yields, and product qualities. (orig.) [Deutsch] Die fuer die Kohleverfluessigung entwickelte Sumpfphasenhydrierung bietet die Moeglichkeit, die Fluessigprodukte der Pyrolyse von Biomassen zu hochwertigen Vergaserkraftstoffen zu veredeln. Im Hydriertechnikum der DMT wurde hierzu ein Demonstrationsversuch durchgefuehrt. Die Anlage ist fuer einen Kohledurchsatz von 10 kg/h ausgelegt. In einem kontinuierlichen Versuchslauf wurde mit dieser Anlage die technische Machbarkeit der Hydrierung von Bio-Oelen demonstriert. In dem vorliegenden Beitrag werden die Versuchsbedingungen, Ausbeuten und Produktqualitaeten vorgestellt. (orig.)

  6. Seaweed and Biomass production

    Science.gov (United States)

    Nadiradze, K. T.

    2016-02-01

    The Black Sea has a sensitive ecosystem, vulnerable to the potential impacts by climate, water quality, pollution and etc. Successfully restoring and sustaining healthy Black Sea aqua cultural farming will require concreted action by private sector, civil society, farmer organizations and other stakeholders. But to achieve agri-environmental goals at scale, well-organized policy goals, framework and strategy for Sea Agriculture Green energy, Algae Biomass, Sapropel Production, aquacultures farming are essential for Georgian Farmers. But we must recognizes the most sustainable and at least risky farming systems will be those that build in aqua cultural, environmental, and social management practices resilient to climate ch ange and other risks and shocks evident in Georgia and whole in a Black Sea Basin Countries. Black Sea has more than 600 kinds of seaweeds; these species contain biologically active substances also present in fish - vitamins and omega fatty acids. The task is to specify how Black Sea seaweeds can be used in preparing nutrition additives, medicines and cosmetic products. As elsewhere around the world, governments, civil society, and the private sector in Georgia should work together to develop and implement `Blue Economy' and Green Growth strategies to generate equitable, sustainable economic development through strengthening Sea Agriculture. We are very interested to develop Black Sea seaweed plantation ad farming for multiply purposes fo r livestock as food additives, for human as great natural source of iodine as much iodine are released by seaweeds into the atmosphere to facilitate the development of better models or aerosol formation and atmospheric chemistry. It is well known, that earth's oceans are thought to have absorbed about one quarter of the CO2 humans pumped into the atmosphere over the past 20 years. The flip side of this process is that, as they absorb co2, oceans also become more acidic with dramatic consequences for sea life

  7. Overview of biomass conversion technologies

    International Nuclear Information System (INIS)

    Noor, S.; Latif, A.; Jan, M.

    2011-01-01

    A large part of the biomass is used for non-commercial purposes and mostly for cooking and heating, but the use is not sustainable, because it destroys soil-nutrients, causes indoor and outdoor pollution, adds to greenhouse gases, and results in health problems. Commercial use of biomass includes household fuelwood in industrialized countries and bio-char (charcoal) and firewood in urban and industrial areas in developing countries. The most efficient way of biomass utilization is through gasification, in which the gas produced by biomass gasification can either be used to generate power in an ordinary steam-cycle or be converted into motor fuel. In the latter case, there are two alternatives, namely, the synthesis of methanol and methanol-based motor fuels, or Fischer-Tropsch hydrocarbon synthesis. This paper deals with the technological overview of the state-of-the-art key biomass-conversion technologies that can play an important role in the future. The conversion routes for production of Heat, power and transportation fuel have been summarized in this paper, viz. combustion, gasification, pyrolysis, digestion, fermentation and extraction. (author)

  8. Biomass of cocoa and sugarcane

    Science.gov (United States)

    Siswanto; Sumanto; Hartati, R. S.; Prastowo, B.

    2017-05-01

    The role of the agricultural sector is very important as the upstream addressing downstream sectors and national energy needs. The agricultural sector itself is also highly dependent on the availability of energy. Evolving from it then it must be policies and strategies for agricultural development Indonesia to forward particularly agriculture as producers as well as users of biomass energy or bioenergy for national development including agriculture balance with agriculture and food production. Exports of biomass unbridled currently include preceded by ignorance, indifference and the lack of scientific data and potential tree industry in the country. This requires adequate scientific supporting data. This study is necessary because currently there are insufficient data on the potential of biomass, including tree biomasanya detailing the benefits of bioenergy, feed and food is very necessary as a basis for future policy. Measurement of the main estate plants biomass such as cocoa and sugarcane be done in 2015. Measurements were also conducted on its lignocellulose content. Tree biomass sugarcane potential measured consist of leaves, stems and roots, with the weight mostly located on the stem. Nevertheless, not all the potential of the stem is a good raw material for bioethanol. For cocoa turned out leaves more prospective because of its adequate hemicellulose content. For sugarcane, leaf buds contain a good indicator of digestion of feed making it more suitable for feed.

  9. COFIRING BIOMASS WITH LIGNITE COAL

    Energy Technology Data Exchange (ETDEWEB)

    Darren D. Schmidt

    2002-01-01

    The University of North Dakota Energy & Environmental Research Center, in support of the U.S. Department of Energy's (DOE) biomass cofiring program, completed a Phase 1 feasibility study investigating aspects of cofiring lignite coal with biomass relative to utility-scale systems, specifically focusing on a small stoker system located at the North Dakota State Penitentiary (NDSP) in Bismarck, North Dakota. A complete biomass resource assessment was completed, the stoker was redesigned to accept biomass, fuel characterization and fireside modeling tests were performed, and an engineering economic analysis was completed. In general, municipal wood residue was found to be the most viable fuel choice, and the modeling showed that fireside problems would be minimal. Experimental ash deposits from firing 50% biomass were found to be weaker and more friable compared to baseline lignite coal. Experimental sulfur and NO{sub x} emissions were reduced by up to 46%. The direct costs savings to NDSP, from cogeneration and fuel saving, results in a 15- to 20-year payback on a $1,680,000 investment, while the total benefits to the greater community would include reduced landfill burden, alleviation of fees for disposal by local businesses, and additional jobs created both for the stoker system as well as from the savings spread throughout the community.

  10. Energy from biomass and waste

    International Nuclear Information System (INIS)

    Faaij, A.P.C.

    1997-01-01

    Chapter 2 deals with the characteristics and current availability of biomass residues and waste streams in the Dutch context and evaluates to what extent they are suited for conversion to energy, in particular by means of gasification. In Chapter 3 the technical and economic aspects of gasification of both wastes and clean biomass for electricity production are investigated. The performance of the system is evaluated by means of ASPEN plus modelling. Performance is simulated for a wide range of potential biofuels to assess the sensitivity of the system to the fuel composition. An economic evaluation is made based on component data and on a chain analysis that includes the costs of the biofuels and logistics. Chapter 4 evaluates the final waste treatment system in the Netherlands. It investigates to what extent changes in waste production and the implementation of new waste treatment technologies can atfect the energy production and final waste treatment costs. Chapter 5 focuses on long-range developments with respect to land use in the Netherlands. Chapter 6 addresses costs and benefits of the biomass fuel cycle and focuses especially on the external costs of biomass-based electricity production. A comparison is made with coal-based electricity production. Various methods are used to quantify those costs. Both environmental externalities (such as emissions) and indirect socio-economic effects are analysed. Attention will be given to uncertainties in the outcomes and the implications of the results for the economic feasibility of the production of electricity trom biomass in the Dutch context. refs

  11. Biomass living energy; Biomasse l'energie vivante

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Any energy source originating from organic matter is biomass, which even today is the basic source of energy for more than a quarter of humanity. Best known for its combustible properties, biomass is also used to produce biofuels. This information sheet provides also information on the electricity storage from micro-condensers to hydroelectric dams, how to save energy facing the increasing of oil prices and supply uncertainties, the renewable energies initiatives of Cork (Ireland) and the Switzerland european energy hub. (A.L.B.)

  12. Integrated resource management of biomass

    International Nuclear Information System (INIS)

    Goodwin, E.R.

    1992-01-01

    An overview is presented of the use of biomass, with emphasis on peat, as an alternative energy source, from an integrated resource management perspective. Details are provided of the volume of the peat resource, economics of peat harvesting, and constraints to peat resource use, which mainly centre on its high water content. Use of waste heat to dry peat can increase the efficiency of peat burning for electric power generation, and new technologies such as gasification and turbo expanders may also find utilization. The burning or gasification of biomass will release no more carbon dioxide to the atmosphere than other fuels, has less sulfur content than solid fuels. The removal of peat reduces methane emissions and allows use of produced carbon dioxide for horticulture and ash for fertilizer, and creates space that may be used for forestry or agricultural biomass growth. 38 refs

  13. Energy from biomass and waste

    International Nuclear Information System (INIS)

    1991-01-01

    This report provides a review of the Commission of the European Communities (CEC) Energy Demonstration Programme in the sector of Energy from biomass and waste, and examines the current status of the energy technologies associated with the sector, in relation to projects supported under the Programme, those included under various national programmes and by reference to the published literature. Detailed overviews of five sub-categories represented in the Energy from biomass and waste sector are presented to illustrate their relative significance in terms of estimated energy potential, technological and economic status and the nature of future research, development and demonstration needs. Finally the potential role of the biomass and waste energy technologies in meeting the energy needs of the developing world is discussed. 33 refs; 2 figs; 11 tabs

  14. Forestry and biomass energy projects

    DEFF Research Database (Denmark)

    Swisher, J.N.

    1994-01-01

    This paper presents a comprehensive and consistent methodology to account for the costs and net carbon flows of different categories of forestry and biomass energy projects and describes the application of the methodology to several sets of projects in Latin America. The results suggest that both...... biomass energy development and forestry measures including reforestation and forest protection can contribute significantly to the reduction of global CO2 emissions, and that local land-use capacity must determine the type of project that is appropriate in specific cases. No single approach alone...... is sufficient as either a national or global strategy for sustainable land use or carbon emission reduction. The methodology allows consistent comparisons of the costs and quantities of carbon stored in different types of projects and/or national programs, facilitating the inclusion of forestry and biomass...

  15. Metal Carbides for Biomass Valorization

    Directory of Open Access Journals (Sweden)

    Carine E. Chan-Thaw

    2018-02-01

    Full Text Available Transition metal carbides have been utilized as an alternative catalyst to expensive noble metals for the conversion of biomass. Tungsten and molybdenum carbides have been shown to be effective catalysts for hydrogenation, hydrodeoxygenation and isomerization reactions. The satisfactory activities of these metal carbides and their low costs, compared with noble metals, make them appealing alternatives and worthy of further investigation. In this review, we succinctly describe common synthesis techniques, including temperature-programmed reaction and carbothermal hydrogen reduction, utilized to prepare metal carbides used for biomass transformation. Attention will be focused, successively, on the application of transition metal carbide catalysts in the transformation of first-generation (oils and second-generation (lignocellulose biomass to biofuels and fine chemicals.

  16. Biomass furnace: projection and construction

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Fernanda Augusta de Oliveira; Silva, Juarez Sousa e; Silva, Denise de Freitas; Sampaio, Cristiane Pires; Nascimento Junior, Jose Henrique do [Universidade Federal de Vicosa (DEA/UFV), MG (Brazil). Dept. de Engenharia Agricola

    2008-07-01

    Of all the ways to convert biomass into thermal energy, direct combustion is the oldest. The thermal-chemical technologies of biomass conversion such as pyrolysis and gasification, are currently not the most important alternatives; combustion is responsible for 97% of the bio-energy produced in the world (Demirbas, 2003). For this work, a small furnace was designed and constructed to use biomass as its main source of fuel, and the combustion chamber was coupled with a helical transporter which linked to the secondary fuel reservoir to continually feed the combustion chamber with fine particles of agro-industrial residues. The design of the stove proved to be technically viable beginning with the balance of mass and energy for the air heating system. The proposed heat generator was easily constructed as it made use of simple and easily acquired materials, demanding no specialized labor. (author)

  17. Nanomedical strategy to prolong survival period, heighten cure rate, and lower systemic toxicity of S180 mice treated with MTX/MIT.

    Science.gov (United States)

    Song, Ning; Zhao, Ming; Wang, Yuji; Hu, Xi; Wu, Jianhui; Jiang, Xueyun; Li, Shan; Cui, Chunying; Peng, Shiqi

    2016-01-01

    In spite of the usual combination form of methotrexate (MTX)/mitoxantrone (MIT) and various complex combination regimens of MTX/MIT with other anticancer drugs, the survival period, cure rate, and systemic toxicity still need to be improved. For this purpose, a nanostructured amino group-modified mesoporous silica nanoparticles (MSNN)-MTX/MIT was designed. In the preparation, the surface of mesoporous silica nanoparticles (MSNs) was modified with amino groups to form MSNN. The covalent modification of the amino groups on the surface of MSNN with MTX resulted in MSNN-MTX. The loading of MIT into the surface pores of MSNN-MTX produced nanostructured MSNN-MTX/MIT. Compared with the usual combination form (MTX/MIT), nanostructured MSNN-MTX/MIT increased the survival period greatly, heightened the cure rate to a great extent, and lowered the systemic toxicity of the treated S180 mice, significantly. These superior in vivo properties of nanostructured MSNN-MTX/MIT over the usual combination form (MTX/MIT) were correlated with the former selectively releasing MTX and MIT in tumor tissue and inside cancer cells in vitro. The chemical structure and the nanostructure of MSNN-MTX/MIT were characterized using infrared and differential scanning calorimeter spectra as well as transmission electron microscope images, respectively.

  18. ROE Carbon Storage - Forest Biomass

    Science.gov (United States)

    This polygon dataset depicts the density of forest biomass in counties across the United States, in terms of metric tons of carbon per square mile of land area. These data were provided in spreadsheet form by the U.S. Department of Agriculture (USDA) Forest Service. To produce the Web mapping application, EPA joined the spreadsheet with a shapefile of U.S. county (and county equivalent) boundaries downloaded from the U.S. Census Bureau. EPA calculated biomass density based on the area of each county polygon. These data sets were converted into a single polygon feature class inside a file geodatabase.

  19. Soybean biomass produced in Argentina

    DEFF Research Database (Denmark)

    Semino, Stella Maris; Paul, Helena; Tomei, Julia

    2009-01-01

    Soybean biomass for biodiesel, produced in Argentina amongst other places, is considered by some to reduce greenhouse gas emissions and mitigate climate change when compared with fossil fuel. To ensure that the production of biofuels is ‘sustainable', EU institutions and national governments...... are currently designing certification schemes for the sustainable production of biomass. This paper questions the validity of proposed environmental standards, using the production of Argentine soybean as a case study. The production of soybean production is associated with profound environmental impacts...

  20. Leaching From Biomass Gasification Residues

    DEFF Research Database (Denmark)

    Allegrini, Elisa; Boldrin, Alessio; Polletini, A.

    2011-01-01

    The aim of the present work is to attain an overall characterization of solid residues from biomass gasification. Besides the determination of chemical and physical properties, the work was focused on the study of leaching behaviour. Compliance and pH-dependence leaching tests coupled with geoche......The aim of the present work is to attain an overall characterization of solid residues from biomass gasification. Besides the determination of chemical and physical properties, the work was focused on the study of leaching behaviour. Compliance and pH-dependence leaching tests coupled...

  1. A sustainable woody biomass biorefinery.

    Science.gov (United States)

    Liu, Shijie; Lu, Houfang; Hu, Ruofei; Shupe, Alan; Lin, Lu; Liang, Bin

    2012-01-01

    Woody biomass is renewable only if sustainable production is imposed. An optimum and sustainable biomass stand production rate is found to be one with the incremental growth rate at harvest equal to the average overall growth rate. Utilization of woody biomass leads to a sustainable economy. Woody biomass is comprised of at least four components: extractives, hemicellulose, lignin and cellulose. While extractives and hemicellulose are least resistant to chemical and thermal degradation, cellulose is most resistant to chemical, thermal, and biological attack. The difference or heterogeneity in reactivity leads to the recalcitrance of woody biomass at conversion. A selection of processes is presented together as a biorefinery based on incremental sequential deconstruction, fractionation/conversion of woody biomass to achieve efficient separation of major components. A preference is given to a biorefinery absent of pretreatment and detoxification process that produce waste byproducts. While numerous biorefinery approaches are known, a focused review on the integrated studies of water-based biorefinery processes is presented. Hot-water extraction is the first process step to extract value from woody biomass while improving the quality of the remaining solid material. This first step removes extractives and hemicellulose fractions from woody biomass. While extractives and hemicellulose are largely removed in the extraction liquor, cellulose and lignin largely remain in the residual woody structure. Xylo-oligomers, aromatics and acetic acid in the hardwood extract are the major components having the greatest potential value for development. Higher temperature and longer residence time lead to higher mass removal. While high temperature (>200°C) can lead to nearly total dissolution, the amount of sugars present in the extraction liquor decreases rapidly with temperature. Dilute acid hydrolysis of concentrated wood extracts renders the wood extract with monomeric sugars

  2. International biomass. International markets of biomass-energy - Public synthesis

    International Nuclear Information System (INIS)

    Gardette, Yves-Marie; Dieckhoff, Lea; Lorne, Daphne; Postec, Gwenael; Cherisey, Hugues de; RANTIEN, Caroline

    2014-11-01

    This publication proposes a synthesis of a study which aimed at analysing the present and future place of wood-energy in the European Union as the main renewable resource used to produce heat and electricity. This study comprised an analysis of European markets of solid biomass and of regulation, case studies on wood-energy producer markets (North America, Eastern Europe, Brazil and Africa), a study of preparation modes (shredding, granulation, roasting) and biomass transport. This study is based on bibliographical searches in national and European sources, and on field data collected by the various bodies involved in this study. This synthesis notably discusses the following issues: solid biomass is the main renewable resource for the EU and has many applications; European objectives for solid biomass by 2020 are very ambitious; markets are becoming international to face the EU's increasing demand; pellet production in North America is strongly increasing; in Europe, eastern European countries are the main exporters; Brazil has an export potential which is still to be confirmed; the African trade with Europe is still in its infancy. Finally, the development perspectives of roasted wood trade are discussed

  3. 'Biomass lung': primitive biomass combustion and lung disease

    International Nuclear Information System (INIS)

    Baris, Y. I.; Seyfikli, Z.; Demir, A.; Hoskins, J. A.

    2002-01-01

    Domestic burning of biomass fuel is one of the most important risk factors for the development of respiratory diseases and infant mortality. The fuel which causes the highest level of disease is dung. In the rural areas of developing countries some 80% of households rely on biomass fuels for cooking and often heating as well and so suffer high indoor air pollution. Even when the fire or stove is outside the home those near it are still exposed to the smoke. In areas where the winters are long and cold the problem is aggravated since the fire or stove is indoors for many months of the year. The consequence of biomass burning is a level of morbidity in those exposed to the smoke as well as mortality. The rural areas of Turkey are among many in the world where biomass is the major fuel source. In this case report 8 patients from rural areas, particularly Anatolia, who used biomass are presented. Many of these are non-smoking, female patients who have respiratory complaints and a clinical picture of the chronic lung diseases which would have been expected if they had been heavy smokers. Typically patients cook on the traditional 'tandir' stove using dung and crop residues as the fuel. Ventilation systems are poor and they are exposed to a high level of smoke pollution leading to cough and dyspnoea. Anthracosis is a common outcome of this level of exposure and several of the patients developed lung tumours. The findings from clinical examination of 8 of these patients (2 M, 6 F) are presented together with their outcome where known. (author)

  4. Biomass Demand-Resources Value Targeting

    International Nuclear Information System (INIS)

    Lim, Chun Hsion; Lam, Hon Loong

    2014-01-01

    Highlights: • Introduce DRVT supply chain modelling approach to consider underutilised biomass. • Advantages of the novel DRVT biomass supply chain approach. • A case study is presented to demonstrate the improvement of the system. - Abstract: With the global awareness towards sustainability, biomass industry becomes one of the main focuses in the search of alternative renewable resources for energy and downstream product. However, the efficiency of the biomass management, especially in supply chain is still questionable. Even though many researches and integrations of supply chain network have been conducted, less has considered underutilised biomass. This leads to the ignorance of potential value in particular biomass species. A new Demand-Resources Value Targeting (DRVT) approach is introduced in this study to investigate the value of each biomass available in order to fully utilise the biomass in respective applications. With systematic biomass value classification, integration of supply chain based on biomass value from biomass resources-to-downstream product can be developed. DRVT model allows better understanding of biomass and their potential downstream application. A simple demonstration of DRVT approach is conducted based on biomass resources in Malaysia

  5. 25 Jahre - Institut fuer Geodaesie, Teil 2: Forschungsarbeiten und Veroeffentlichungen (25 Years - Institute of Geodesy, Part 2: Research Areas and Publications)

    Science.gov (United States)

    2000-01-01

    Messungen mit Nivellements, Zenitdistanzmessungen oder astrono - mischen Azimut, Ulngen- und Breitenbestimmiungen liefert Informationen Ober die geometri...Using Geometric Hilfe des GPS in Ruanda. In: Institut ffir Geod1.sie Levelling, Trigonometric Heighting and Astrono - (Hrsg.): Das Global Positioning

  6. Die Dramatikerin Theresia Walser spricht mit Maria Aparecida Barbosa über das Theaterstück "King Kongs Töchter":Mit einer Einführung von Karina Schuller

    OpenAIRE

    Barbosa, M.A. (Maria)

    2012-01-01

    In ihrem Interview spricht die Literaturwissenschaftlerin Maria Aparecida Barbosa mit der Dramatikerin Theresia Walser. Am Beispiel des Theaterstücks King Kongs Töchter (1998), das sich auf groteske Art und Weise mit dem Alltag in einem Altenheim befasst, werden dabei verschiedene Themen angesprochen: Es geht um die Selbstreflexivität des Theaters, um Walsers Verständnis von poetischer Sprache und Realismus sowie um den kreativen Schreibprozess im Allgemeinen. Ergänzt wird das Interview durch...

  7. Fiscalini Farms Biomass Energy Project

    Energy Technology Data Exchange (ETDEWEB)

    William Stringfellow; Mary Kay Camarillo; Jeremy Hanlon; Michael Jue; Chelsea Spier

    2011-09-30

    In this final report describes and documents research that was conducted by the Ecological Engineering Research Program (EERP) at the University of the Pacific (Stockton, CA) under subcontract to Fiscalini Farms LP for work under the Assistance Agreement DE-EE0001895 'Measurement and Evaluation of a Dairy Anaerobic Digestion/Power Generation System' from the United States Department of Energy, National Energy Technology Laboratory. Fiscalini Farms is operating a 710 kW biomass-energy power plant that uses bio-methane, generated from plant biomass, cheese whey, and cattle manure via mesophilic anaerobic digestion, to produce electricity using an internal combustion engine. The primary objectives of the project were to document baseline conditions for the anaerobic digester and the combined heat and power (CHP) system used for the dairy-based biomass-energy production. The baseline condition of the plant was evaluated in the context of regulatory and economic constraints. In this final report, the operation of the plant between start-up in 2009 and operation in 2010 are documented and an interpretation of the technical data is provided. An economic analysis of the biomass energy system was previously completed (Appendix A) and the results from that study are discussed briefly in this report. Results from the start-up and first year of operation indicate that mesophilic anaerobic digestion of agricultural biomass, combined with an internal combustion engine, is a reliable source of alternative electrical production. A major advantage of biomass energy facilities located on dairy farms appears to be their inherent stability and ability to produce a consistent, 24 hour supply of electricity. However, technical analysis indicated that the Fiscalini Farms system was operating below capacity and that economic sustainability would be improved by increasing loading of feedstocks to the digester. Additional operational modifications, such as increased utilization of

  8. Leaching from biomass combustion ash

    DEFF Research Database (Denmark)

    Maresca, Alberto; Astrup, Thomas Fruergaard

    2014-01-01

    The use of biomass combustion ashes for fertilizing and liming purposes has been widely addressed in scientific literature. Nevertheless, the content of potentially toxic compounds raises concerns for a possible contamination of the soil. During this study five ash samples generated at four...

  9. Ionic Liquids in Biomass Processing

    Science.gov (United States)

    Tan, Suzie Su Yin; Macfarlane, Douglas R.

    Ionic liquids have been studied for their special solvent properties in a wide range of processes, including reactions involving carbohydrates such as cellulose and glucose. Biomass is a widely available and renewable resource that is likely to become an economically viable source of starting materials for chemical and fuel production, especially with the price of petroleum set to increase as supplies are diminished. Biopolymers such as cellulose, hemicellulose and lignin may be converted to useful products, either by direct functionalisation of the polymers or depolymerisation to monomers, followed by microbial or chemical conversion to useful chemicals. Major barriers to the effective conversion of biomass currently include the high crystallinity of cellulose, high reactivity of carbohydrates and lignin, insolubility of cellulose in conventional solvents, as well as heterogeneity in the native lignocellulosic materials and in lignin itself. This combination of factors often results in highly heterogeneous depolymerisation products, which make efficient separation difficult. Thus the extraction, depolymerisation and conversion of biopolymers will require novel reaction systems in order to be both economically attractive and environmentally benign. The solubility of biopolymers in ionic liquids is a major advantage of their use, allowing homogeneous reaction conditions, and this has stimulated a growing research effort in this field. This review examines current research involving the use of ionic liquids in biomass reactions, with perspectives on how it relates to green chemistry, economic viability, and conventional biomass processes.

  10. Energy from biomass and waste

    NARCIS (Netherlands)

    Faaij, A.P.C.

    1997-01-01

    Biomass, a broad term for all organic matter of plants, trees and crops, is currently regarded as a renewable energy source which can contribute substantially to the world's energy supply in the future. Various scenarios for the development of energy supply and demand, such as compiled by the

  11. Storing biomass in round bales

    Energy Technology Data Exchange (ETDEWEB)

    Summer, H.R.; Hellwig, R.E.; Monroe, G.E.

    1984-09-01

    Biomass fuels, in the form of crop residues, were stored outside in large round bales. The influence of rainfall on bale mass and the change in apparent average moisture content (A.A.M.C) was studied. Covering the bales with large sheets of polyethylene was found to be the most effective way of reducing moisture penetration.

  12. Biomass energy systems program summary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    Research programs in biomass which were funded by the US DOE during fiscal year 1978 are listed in this program summary. The conversion technologies and their applications have been grouped into program elements according to the time frame in which they are expected to enter the commercial market. (DMC)

  13. Torrefaction of biomass. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-05-15

    The objective of this project was to investigate and understand some of the basics of the process of torrefaction and explore the true characteristics of this new type of solid biomass fuel. Tests with torrefaction of different biomass have thus been conducted in both laboratory scale as well as bench scale investigating samples from milligram up to >100 kg. Test in TGA-FTIR and a lab scale pyro-ofen was used to understand the basic chemistry of the influence of torrefaction temperature on the kinetics of the process as well as the condensable gases leaving the process. The results reveal a process that above 250 deg. C is exothermic and that the major condensable gases consist mainly of methanol, acetic acid and water. Significant amounts of methyl-chloride were detected in the condensable gases and do thereby suggest that a certain amount of corrosive Cl could be reduced from the fuel by means of torrefaction. It was also concluded that great care has to be taken during and after production as the torrefied material was seen to self-ignite in an air environment at temperatures above 200 deg. C. The grindability of the material (energy consumption during milling) is indeed significantly improved by torrefaction and can be reduced up to 6 times compared to raw biomass. The results from test in bench scale as well as in lab scale mills suggested that in order to reach grindability similar to coal a torrefaction temperature above 240 deg. C is required for wood chips and above 290 deg. C for wood pellets. These figures will however differ with the type of biomass torrefied and the particle size of the material torrefied and milled. Moisture uptake in torrefied materials is decreased compared to raw biomass. However, due to formation of cavities in the material during torrefaction, the full effect is met first after densification. The hydrophobicity of the material increases with higher torrefaction temperature, but still a rather significant moisture uptake is

  14. Treatment of biomass to obtain ethanol

    Science.gov (United States)

    Dunson, Jr., James B.; Elander, Richard T [Evergreen, CO; Tucker, III, Melvin P.; Hennessey, Susan Marie [Avondale, PA

    2011-08-16

    Ethanol was produced using biocatalysts that are able to ferment sugars derived from treated biomass. Sugars were obtained by pretreating biomass under conditions of high solids and low ammonia concentration, followed by saccharification.

  15. Verfahren zur Hydroformylierung, Liganden mit von Bisphenol A abgeleiteter Struktur und Katalysator umfassend einen Komplex dieser Liganden

    NARCIS (Netherlands)

    2002-01-01

    Die vorliegende Erfindung betrifft ein Verfahren zur Hydroformylierung ethylenisch ungesättigter Verbindungen, wobei man als Hydroformylierungskatalysator wenigstens einen Komplex eines Metalss der VIII. Nebengruppe mit wenigstens einer phosphorhaltigen Verbindung als Liganden einsetzt, wobei diese

  16. Dewatering of sludge using the hydrosoft high-pressure process; Entwaessern von Schlaemmen mit dem Hydrosoft-Hochdruckverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Eder, C.; Eder, G. [Christian Eder Technology GbR, Neunkirchen (Germany)

    1999-07-01

    The hydrosoft process permits to dewater sludge, especially also sludge from municipal sewage treatment plant, until it contains a high proportion of dry substance. For existing dewatering systems equipped with the long-lived chamber filter presses, too, the dry matter content of the filter cake can be substantially increased using the hydrosoft process; only the pump system must be retrofitted. As a preliminary measure, tests with mobile pilot plants should be carried out. (orig.) [German] Mit dem Hydrosoft-Verfahren besteht die Moeglichkeit Schlaemme, insbesondere auch Schlaemme aus kommunalen Klaeranlagen, auf hohe Trockensubstanz-Gehalte zu entwaessern. Auch bei bestehenden Entwaesserungsanlagen, die mit den langlebigen Kammerfilterpressen ausgeruestet sind, koennen die Trockensubstanzgehalte der Filterkuchen mit dem Hydrosoft-Verfahren, fuer das dann nur noch das Pumpsystem nachgeruestet werden muss, wesentlich angehoben werden. Vorausgehen sollten jeweils Vorversuche mit mobilen Versuchsanlagen. (orig.)

  17. Contribution of occupational therapy for patients with depression / Beitrag der Ergotherapie in der Wahrnehmung von Menschen mit Depression

    Directory of Open Access Journals (Sweden)

    Treusch Yvonne

    2016-12-01

    Full Text Available In Bezug auf den professionellen Beitrag und die Wirkfaktoren der Ergotherapie bei Menschen mit Depression existieren bislang wenige Studien. Dies steht im Kontrast zum praktischen und quantitativen Beitrag dieser Therapieform.

  18. Biomass and Swedish energy policy

    International Nuclear Information System (INIS)

    Johansson, Bengt

    2001-01-01

    The use of biomass in Sweden has increased by 44% between 1990 and 1999. In 1999 it was 85 TWh, equivalent to 14% of the total Swedish energy supply. The existence of large forest industry and district heating systems has been an essential condition for this expansion. The tax reform in 1991 seems, however, to have been the most important factor responsible for the rapid bioenergy expansion. Through this reform, the taxation of fossil fuels in district heating systems increased by approximately 30-160%, depending on fuel, whereas bioenergy remained untaxed. Industry is exempted from the energy tax and pays reduced carbon tax. No tax is levied on fossil fuels used for electricity production. Investment grants have existed for biomass-based electricity production but these grants have not been large enough to make biomass-based electricity production economically competitive in a period of falling electricity prices. Despite this, the biomass-based electricity production has increased slightly between 1990 and 1999. A new taxation system aiming at a removal of the tax difference between the industry, district heating and electricity sectors has recently been analysed by the Swedish government. One risk with such a system is that it reduces the competitiveness for biomass in district heating systems as it seems unlikely that the taxes on fossil fuels in the industry and electricity sectors will increase to a level much higher than in other countries. A new system, based on green certificates, for supporting electricity from renewable energy sources has also been proposed by the government.

  19. A review of the MIT experiments on the closed-loop digital control of reactor power

    International Nuclear Information System (INIS)

    Bernard, J.A.

    1989-01-01

    In this paper a review is provided of certain major experiments conducted from 1985 to 1988 as part of the MIT program on the development and demonstration of advanced technologies for the closed-loop digital control of nuclear reactors. Included are demonstrations of the supervisory control of neutronic power using an alternate formulation of the dynamic period equation, the use of the MIT-SNL Period-Generated Minimum Time Control Laws for the time-optimal control of neutronic power, and the evaluation of predictive displays as an operator aid. The significance of each of these advances is discussed in terms of the overall development of a multi-tiered controller that includes supervisory algorithms, predictive control laws, and automated reasoning

  20. Rethinking the Relationship Between Academia and Industry: Qualitative Case Studies of MIT and Stanford.

    Science.gov (United States)

    Zhu, Fengliang; Hawk, Soaring

    2016-10-01

    As knowledge has become more closely tied to economic development, the interrelationship between academia and industry has become stronger. The result has been the emergence of what Slaughter and Leslie call academic capitalism. Inevitably, tensions between academia and industry arise; however, universities such as MIT and Stanford with long traditions of industry interaction have been able to achieve a balance between academic and market values. This paper describes the strategies adopted by MIT and Stanford to achieve this balance. The results indicate that implicit culture is a stronger determinant of balance than are explicit rules. Finally, the author proposes a concept of balance to reconsider the relationship between academia and industry: today's universities, particularly those with strengths in engineering and management, are both symbiotic and interdependent with industry. A reasonable attitude toward the university-industry relationship is that of balance rather than strict separation. Universities can thus establish effective mechanisms to reach a balance between conflicting values.