WorldWideScience

Sample records for biological bragg curve

  1. Bragg Curve Spectroscopy

    International Nuclear Information System (INIS)

    An alternative utilization is presented for the gaseous ionization chamber in the detection of energetic heavy ions, which is called Bragg Curve Spectroscopy (BCS). Conceptually, BCS involves using the maximum data available from the Bragg curve of the stopping heavy ion (HI) for purposes of identifying the particle and measuring its energy. A detector has been designed that measures the Bragg curve with high precision. From the Bragg curve the range from the length of the track, the total energy from the integral of the specific ionization over the track, the dE/dx from the specific ionization at the beginning of the track, and the Bragg peak from the maximum of the specific ionization of the HI are determined. This last signal measures the atomic number, Z, of the HI unambiguously

  2. Results from a Bragg Curve Spectrometer

    International Nuclear Information System (INIS)

    The Bragg Curve Spectrometer (BCS) is an ionization chamber long enough to stop particles of interest. Particles enter through the cathode window and leave an ionization track parallel to the electric field. The ionization electrons drift through a Frisch grid and are collected on an anode. The anode current, as a function of time, is split and used as input for two amplifiers, one with a long integration time constant for energy measurement, and one with a short time constant to pick off the maximum ionization or Bragg peak. The Bragg peak, which is proportional to the nuclear charge, is used for particle identification. We have constructed and tested several versions of the BCS. The results are described

  3. Results from a Bragg curve spectrometer

    Science.gov (United States)

    Leach, D. D.; Davis, K. J.

    The Bragg Curve Spectrometer (BCS) is an ionization chamber long enough to stop particles of interest. Particles enter through the cathode window and leave an ionization track parallel to the electric field. The ionization electrons drift through a Frisch grid and are collected on an anode. The anode current, as a function of time, is split and used as input for two amplifiers, one with a long integration time constant for energy measurement, and one with a short time constant to pick off the maximum ionization or Bragg peak. The Bragg peak, which is proportional to the nuclear charge, is used for particle identification. Several versions of the BCS have been constructed and tested. The results are described.

  4. Distribution of Micronuclei in Human Fibroblasts across the Bragg Curve of Light and Heavy Ions

    Science.gov (United States)

    Hada, M.; Lacy, S.; Gridley, D. S.; Rusek, A.; Cucinotta, F. A.; Wu, H.

    2007-01-01

    The space environment consists of energetic particles of varying mass and energy, and understanding the :biological Bragg curve" is essential in optimizing shielding effectiveness against space radiation induced biological impacts. The "biological Bragg curve" is dependent on the energy and the type of the primary particle, and may vary for different biological endpoints. Previously, we studied the induction of micronuclei (MN) across the Bragg curve of energetic Fe and Si ions, and observed no increased yield of MN at the location of the Bragg peak. However, the ratio of mono- to bi-nucleated cells, which indicates inhibition of cell progression, was found higher at the Bragg peak location in comparison to the plateau region of the Bragg curve. Here, we report the induction of MN in normal human fibroblast cells across the Bragg curve of incident protons generated at Loma Linda University. Similar to Si and Fe ions, the ratio of mono- to bi-nucleated cells showed a clear spike as the protons reached the Bragg peak. Unlike the two heavy ions, however, the MN yield also increased at the Bragg peak location. These results confirm the hypothesis that severely damaged cells at the Bragg peak of heavy, but not light ions are more likely to go through reproductive death and not be evaluated for micronuclei.

  5. A neural network for the Bragg synthetic curves recognition

    International Nuclear Information System (INIS)

    A ionization chamber was employed named Bragg curve spectroscopy. The Bragg peak amplitude is a monotone growing function of Z, which permits to identify elements through their measurement. A better technique for this measurement is to improve the use of neural networks with the purpose of the identification of the Bragg curve. (Author)

  6. Bragg Curve Counter for primary beam monitor

    International Nuclear Information System (INIS)

    The prototype Bragg Curve Counter (BCC) has been tested by α-source (241Am) with a continuous gas flow system (P-10: 90% Ar+10% CH4, at 300Torr). Two types of the Frisch grid were prepared for the BCC. One was made of expanded metal meshes, which consist of 175 meshes/inch2 with a 100μmt nickel sheet. The other was made of a 1mm pitch wire with φ 50 μm of the tungsten. The shape of Bragg peak signal was compared each other. It was found that the energy spectrum obtained by the wire grid is a little sharper than that obtained by the meshes grid. However the meshes grid is superior than the wire grid so far as handling and durability are concerned. (author)

  7. A Bragg curve ionization chamber for acceleration mass spectrometry

    International Nuclear Information System (INIS)

    An ionization chamber based on the Bragg curve spectrometry method to be used as the final detector in a accelerator mass spectrometry system is described. The first tests with a Cl beam give energy resolution of 1% and Z resolving power of 72 at Z=17

  8. Performance of a Bragg curve detector for heavy ion identification

    International Nuclear Information System (INIS)

    By using Bragg curve spectroscopy, one can measure atomic number and energy of high energy heavy ions stopping in a gas-filled ionization chamber with longitudinal electric field. In this paper, we report on the results obtained with an isobutane filled detector. An energy resolution of 0.8% fwhm and a Z resolution of 2.7% fwhm were achieved for elastically scattered 300 MeV 40Ar ions. We study the Bragg peak amplitude dependence on the energy of the incoming ions, a dependence presumably due to the Frisch grid screening inefficiency. The corrected Bragg peak spectrum of inelastically scattered 300 MeV 40Ar ions exhibits a satisfactory Z separation around Z = 18. (orig.)

  9. Performance of a Bragg curve detector for heavy ion identification

    Science.gov (United States)

    Asselineau, J. M.; Duchon, J.; L'Haridon, M.; Mosrin, P.; Regimbart, R.; Tamain, B.

    1982-12-01

    By using Bragg curve spectroscopy, one can measure atomic number and energy of high energy heavy ions stopping in a gas-filled ionization chamber with longitudinal electric field. In this paper, we report on the results obtained with an isobutane filled detector. An energy resolution of 0.8% fwhm and a Z resolution of 2.7% fwhm were achieved for elastically scattered 300 MeV 40Ar ions. We study the Bragg peak amplitude dependence on the energy of the incoming ions, a dependence presumably due to the Frisch grid screening inefficiency. The corrected Bragg peak spectrum of inelastically scattered 300 MeV 40Ar ions exhibits a satisfactory Z separation around Z=18.

  10. The mass dependence of the signal peak height of a Bragg-curve ionization chamber

    International Nuclear Information System (INIS)

    The Bragg-curve detector of the parallel plate ionization chamber type generates a signal that is a distorted replica of the original Bragg-curve. In result of this distortion, the signal peak height is not only a function of the atomic number of the heavy ion, as it is often stated, but also of the particle mass. This mass effect was studied with the aid of computer simulation, and it was found to be dependent on the Frisch grid to anode gap width and on the detector gas. The charge resolution of the detector is affected very significantly by this mass dependence of the signal peak height. Therefore, a careful selection of the detector gas and the grid to anode gap width is necessary, if good charge resolution over a wide range of heavy ions is required. (orig.)

  11. The mass dependence of the signal peak height of a Bragg-curve ionization chamber

    Science.gov (United States)

    Shenhav, N. J.; Stelzer, H.

    1985-01-01

    The Bragg-curve detector of the parallel plate ionization chamber type generates a signal that is a distorted replica of the original Bragg-curve. In result of this distortion, the signal peak height is not only a function of the atomic number of the heavy ion, as it is often stated, but also of the particle mass. This mass effect was studied with the aid of computer simulation, and it was found to be dependent on the Frisch grid to anode gap width and on the detector gas. The charge resolution of the detector is affected very significantly by this mass dependence of the signal peak height. Therefore, a careful selection of the detector gas and the grid to anode gap width is necessary, if good charge resolution over a wide range of heavy ions is required.

  12. Study on Bragg Curve Spectrometry for Identifying Heavy Ions for AMS Measurement

    Institute of Scientific and Technical Information of China (English)

    LIGuo-qiang; HEMing; GUANYong-jing; DONGKe-jun; WANGHui-juan; LUOLi-xiong; JIANGShan

    2003-01-01

    Isobaric interference is the main problem that should be overcome in AMS. High resolution detectors should be used in AMS measurement, so that a Bragg curve detector was set up in Chinese Institute of Atomic Energy. The detector has a better energy and charge resolution over quite a wide range, and the total energy of particles entered into the detector is lost in the gas chamber.

  13. Relative Biological Effectiveness Variation Along Monoenergetic and Modulated Bragg Peaks of a 62-MeV Therapeutic Proton Beam: A Preclinical Assessment

    OpenAIRE

    Chaudhary, Pankaj; I Marshall, Thomas; Perozziello, Francesca M; Manti, Lorenzo; Currell, Frederick J.; Hanton, Fiona; McMahon, Stephen J; Kavanagh, Joy N.; Cirrone, Giuseppe Antonio Pablo; Romano, Francesco; Prise, Kevin M.; SCHETTINO, Giuseppe

    2014-01-01

    iological optimization of proton therapy critically depends on detailed evaluation of relative biological effectiveness (RBE) variations along the Bragg curve. The clinically accepted RBE value of 1.1 is an oversimplification, which disregards the steep rise of linear energy transfer (LET) at the distal end of the spread-out Bragg peak. We observed significant cell killing RBE variations dependent on beam modulation, intrinsic radiosensitivity, and LET in agreement with the LEM predicted valu...

  14. Practical biological spread-out Bragg peak design of carbon beam

    OpenAIRE

    Kim, Chang Hyeuk; Lee, Hwa-Ryun; Chang, Seduk; Jang, Hong Suk; Kim, Jeong Hwan; Park, Dong Wook; Hwang, Won Taek; Yang, Tea-Keun

    2015-01-01

    The carbon beams show more advantages on the biological properties compared with proton beams in radiation therapy. The carbon beam shows high linear energy transfer (LET) to medium and it increases the relative biological effectiveness (RBE). To design spread-out Bragg peak (SOBP) of biological dose using carbon beam, a practical method was purposed by using the linear-quadratic (LQ) model and Geant4 based Monte Carlo simulation code. The various Bragg peak profiles and LET was calculated fo...

  15. DNA damage intensity in fibroblasts in a 3-dimensional collagen matrix correlates with the Bragg curve energy distribution of a high LET particle

    International Nuclear Information System (INIS)

    The DNA double-strand break (DSB) damage response induced by high energy charged particles on lung fibroblast cells embedded in a 3-dimensional (3-D) collagen tissue equivalents was investigated using antibodies to the DNA damage response proteins gamma-histone 2AX (γ-H2AX) and phosphorylated DNA-PKcs (p-DNA-PKcs). 3-D tissue equivalents were irradiated in positions across the linear distribution of the Bragg curve profiles of 307.7 MeV/nucleon, 556.9 MeV/nucleon, or 967.0 MeV/nucleon 56Fe ions at a dose of 0.30 Gy. Patterns of discrete DNA damage streaks across nuclei or saturated nuclear damage were observed, with saturated nuclear damage being more predominant as samples were positioned closer to the physical Bragg peak. Quantification of the DNA damage signal intensities at each distance for each of the examined energies revealed a biological Bragg curve profile with a pattern of DNA damage intensity similar to the physical Bragg curve for the particular energy. Deconvolution microscopy of nuclei with streaked or saturated nuclear damage pattern revealed more details of the damage, with evidence of double-strand breaks radially distributed from the main particle track as well as multiple discrete tracks within saturated damage nuclei. These 3-D culture systems can be used as a biological substrate to better understand the interaction of heavy charged particles of different energies with tissue and could serve as a basis to model space-radiation-induced cancer initiation and progression.

  16. DNA damage intensity in fibroblasts in a 3-dimensional collagen matrix correlates with the Bragg curve energy distribution of a high LET particle

    Science.gov (United States)

    Roig, Andres I.; Hight, Suzie K.; Minna, John D.; Shay, Jerry W.; Rusek, Adam; Story, Michael D.

    2012-01-01

    Purpose The DNA double-strand break (DSB) damage response induced by high energy charged particles on lung fibroblast cells embedded in a 3-dimensional (3-D) collagen tissue equivalents was investigated using antibodies to the DNA damage response proteins gamma-histone 2AX (γ-H2AX) and phosphorylated DNA-PKcs (p-DNA-PKcs). Materials and methods 3-D tissue equivalents were irradiated in positions across the linear distribution of the Bragg curve profiles of 307.7 MeV/nucleon, 556.9 MeV/nucleon, or 967.0 MeV/nucleon 56Fe ions at a dose of 0.30 Gy. Results Patterns of discrete DNA damage streaks across nuclei or saturated nuclear damage were observed, with saturated nuclear damage being more predominant as samples were positioned closer to the physical Bragg peak. Quantification of the DNA damage signal intensities at each distance for each of the examined energies revealed a biological Bragg curve profile with a pattern of DNA damage intensity similar to the physical Bragg curve for the particular energy. Deconvolution microscopy of nuclei with streaked or saturated nuclear damage pattern revealed more details of the damage, with evidence of double-strand breaks radially distributed from the main particle track as well as multiple discrete tracks within saturated damage nuclei. Conclusions These 3-D culture systems can be used as a biological substrate to better understand the interaction of heavy charged particles of different energies with tissue and could serve as a basis to model space-radiation-induced cancer initiation and progression. PMID:20201648

  17. Theoretical methods for the calculation of Bragg curves and 3D distributions of proton beams

    Energy Technology Data Exchange (ETDEWEB)

    Ulmer, W.; Matsinos, E. [Varian Medical Systems, Baden (Switzerland); Ulmer, W. [Max-Planck-Institut of Physics, Gottingen, Germany and Klinikum Frankfurt/Oder, Department of Radiation Physics, Frankfurt/Oder (Germany); Matsinos, E. [University of Zurich (Switzerland)

    2010-12-15

    The well-known Bragg-Kleeman rule R(CSDA) = A*E{sub 0}{sup p} has become a pioneer work in radiation physics of charged particles and is still a useful tool to estimate the range R(CSDA) of approximately monoenergetic protons with initial energy E{sub 0} in a homogeneous medium. The rule is based on the continuous-slowing-down-approximation (CSDA). It results from a generalized (nonrelativistic) Langevin equation and a modification of the phenomenological friction term. A relativistic extension of the generalized Langevin equation yields the formula R(CSDA) = A*(E{sub 0} + E{sub 0}{sup 2}/2M*c{sup 2}){sup p}. Besides this phenomenological starting-point, a complete integration of the Bethe-Bloch equation (BBE) is developed. The results obtained in the context of the aforementioned methods are compared with Monte-Carlo calculations (GEANT4). In the framework of the CSDA, the energy transfer from protons to environmental atomic electrons does not account for local fluctuations. Based on statistical quantum mechanics, an analysis of the Gaussian convolution and the Landau-Vavilov distribution function is carried out to describe these fluctuations. The Landau tail is derived as Hermite polynomial corrections of a Gaussian convolution. It is experimentally confirmed that proton Bragg curves with E{sub 0} {>=} 120 MeV show a buildup, which increases with the proton energy. This buildup is explained by a theoretical analysis of impinging proton beamlets. In order to obtain a complete dose calculation model for proton treatment planning, some further aspects have to be accounted for: the decrease of the fluence of the primary protons due to nuclear interactions, the transport of released secondary protons, the dose contribution of heavy recoil nuclei, the inclusion of lateral scatter of the primary and secondary protons based on Moliere's multiple-scatter theory, and the scatter contributions of collimators. This study also presents some results which go beyond proton

  18. A Bragg curve counter with an active cathode to improve the energy threshold in fragment measurements

    International Nuclear Information System (INIS)

    We have developed a Bragg curve counter (BCC) equipped with an active cathode to extend the energy acceptance to lower energies than for a conventional BCC to measure differential cross-sections of fragment production reactions induced by tens of MeV protons. The signal from the active cathode providing the timing signal of fragment incidence and the time difference signal between the cathode and anode gives information on the fragment range in the BCC on the basis of electron drift time. Utilization of the range information made possible identification of fragments less than 0.5 MeV/u that is lower than the identification threshold of a conventional BCC technique. After investigations on fundamental properties of a newly constructed BCC using heavy ion beams and alpha-particles, this method was applied successfully to a fragment production measurement for 70 MeV proton-induced reactions on carbon. With this technique, the energy threshold of the BCC was improved without introducing an additional detector or energy loss

  19. Theoretical methods for the calculation of Bragg curves and 3D distributions of proton beams

    Science.gov (United States)

    Ulmer, W.; Matsinos, E.

    2010-12-01

    The well-known Bragg-Kleeman rule RCSDA = A ṡ E has become a pioneer work in radiation physics of charged particles and is still a useful tool to estimate the range RCSDA of approximately monoenergetic protons with initial energy E0 in a homogeneous medium. The rule is based on the continuous-slowing-down-approximation (CSDA). It results from a generalized (nonrelativistic) Langevin equation and a modification of the phenomenological friction term. The complete integration of this equation provides information about the residual energy E(z) and dE(z)/dz at each position z(0 ≦ z ≦ RCSDA). A relativistic extension of the generalized Langevin equation yields the formula RCSDA = A ṡ (E0 + E/2M ṡ c2)p. The initial energy of therapeutic protons satisfies E0 ≪ 2M ṡ c2(M ṡ c2 = 938.276 MeV), which enables us to consider the relativistic contributions as correction terms. Besides this phenomenological starting-point, a complete integration of the Bethe-Bloch equation (BBE) is developed, which also provides the determination of RCSDA, E(z) and dE(z)/dz and uses only those parameters given by the BBE itself (i.e., without further empirical parameters like modification of friction). The results obtained in the context of the aforementioned methods are compared with Monte-Carlo calculations (GEANT4); this Monte-Carlo code is also used with regard to further topics such as lateral scatter, nuclear interactions, and buildup effects. In the framework of the CSDA, the energy transfer from protons to environmental atomic electrons does not account for local fluctuations. Based on statistical quantum mechanics, an analysis of the Gaussian convolution and the Landau-Vavilov distribution function is carried out to describe these fluctuations. The Landau tail is derived as Hermite polynomial corrections of a Gaussian convolution. It is experimentally confirmed that proton Bragg curves with E0 ≧ 120 MeV show a buildup, which increases with the proton energy. This

  20. Practical biological spread-out Bragg peak design of carbon beam

    CERN Document Server

    Kim, Chang Hyeuk; Chang, Seduk; Jang, Hong Suk; Kim, Jeong Hwan; Park, Dong Wook; Hwang, Won Taek; Yang, Tea-Keun

    2015-01-01

    The carbon beams show more advantages on the biological properties compared with proton beams in radiation therapy. The carbon beam shows high linear energy transfer (LET) to medium and it increases the relative biological effectiveness (RBE). To design spread-out Bragg peak (SOBP) of biological dose using carbon beam, a practical method was purposed by using the linear-quadratic (LQ) model and Geant4 based Monte Carlo simulation code. The various Bragg peak profiles and LET was calculated for each slice at the target region. To generate appropriate biological SOBP, a set of weighting factor, which is a power function in terms of energy step, was applied to the obtained each physical dose. The designed biological SOBP showed 1.34 % of uniformity.

  1. Doubly curved imaging Bragg crystal spectrometer for X-ray astronomy

    DEFF Research Database (Denmark)

    Byrnak, B. P.; Christensen, Finn Erland; Westergaard, Niels Jørgen Stenfeldt;

    1985-01-01

    An X-ray spectrometer which is sensitive in the 0.5-7-keV energy range and is intended for use onboard astronomical satellites has been studied. The Bragg reflected rays from a doubly bent crystal positioned downstream of the focal plane of a grazing-incidence concentrator are focused along the a...

  2. Theoretical methods for the calculation of Bragg curves and 3D distributions of proton beams

    OpenAIRE

    Ulmer, Waldemar; Matsinos, Evangelos

    2010-01-01

    The well-known Bragg-Kleeman rule RCSDA = A dot E0p has become a pioneer work in radiation physics of charged particles and is still a useful tool to estimate the range RCSDA of approximately monoenergetic protons with initial energy E0 in a homogeneous medium. The rule is based on the continuous-slowing-down-approximation (CSDA). It results from a generalized (nonrelativistic) Langevin equation and a modification of the phenomenological friction term. The complete integration of this equatio...

  3. Curved spiral antennas for underwater biological applications

    Science.gov (United States)

    Llamas, Ruben

    We developed curved spiral antennas for use in underwater (freshwater) communications. Specifically, these antennas will be integrated in so-called mussel backpacks. Backpacks are compact electronics that incorporate sensors and a small radio that operate around 300 MHz. Researchers attach these backpacks in their freshwater mussel related research. The antennas must be small, lightweight, and form-fit the mussel. Additionally, since the mussel orientation is unknown, the antennas must have broad radiation patterns. Further, the electromagnetic environment changes significantly as the mussels burrow into the river bottom. Broadband antennas, such a spiral antennas, will perform better in this instance. While spiral antennas are well established, there has been little work on their performance in freshwater. Additionally, there has been some work on curved spiral antennas, but this work focused on curving in one dimension, namely curving around a cylinder. In this thesis we develop spiral antennas that curve in two dimensions in order to conform the contour of a mussel's shell. Our research has three components, namely (a) an investigation of the relevant theoretical underpinning of spiral antennas, (b) extensive computer simulations using state-of-the art computational electromagnetics (CEM) simulation software, and (c) experimental validation. The experimental validation was performed in a large tank in a laboratory setting. We also validated some designs in a pool (~300,000 liters of water and ~410 squared-meter dive pool) with the aid of a certified diver. To use CEM software and perform successful antenna-related experiments require careful attention to many details. The mathematical description of radiation from an antenna, antenna input impedance and so on, is inherently complex. Engineers often make simplifying assumptions such as assuming no reflections, or an isotropic propagation environment, or operation in the antenna far field, and so on. This makes

  4. Relative Biological Effectiveness Variation Along Monoenergetic and Modulated Bragg Peaks of a 62-MeV Therapeutic Proton Beam: A Preclinical Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Chaudhary, Pankaj; Marshall, Thomas I. [Centre for Cancer Research and Cell Biology, School of Medicine, Dentistry and Biomedical Sciences, Queen' s University Belfast, Belfast (United Kingdom); Perozziello, Francesca M.; Manti, Lorenzo [Department of Physics, University of Naples Federico II and INFN Naples Section University of Naples, Naples (Italy); Currell, Frederick J.; Hanton, Fiona [Centre for Plasma Physics, School of Mathematics and Physics, Queen' s University Belfast, Belfast (United Kingdom); McMahon, Stephen J.; Kavanagh, Joy N. [Centre for Cancer Research and Cell Biology, School of Medicine, Dentistry and Biomedical Sciences, Queen' s University Belfast, Belfast (United Kingdom); Cirrone, Giuseppe Antonio Pablo; Romano, Francesco [Istituto Nazionale di Fisica Nucleare, LNS, Catania (Italy); Prise, Kevin M., E-mail: k.prise@qub.ac.uk [Centre for Cancer Research and Cell Biology, School of Medicine, Dentistry and Biomedical Sciences, Queen' s University Belfast, Belfast (United Kingdom); Schettino, Giuseppe [Centre for Cancer Research and Cell Biology, School of Medicine, Dentistry and Biomedical Sciences, Queen' s University Belfast, Belfast (United Kingdom); National Physical Laboratory, Teddington (United Kingdom)

    2014-09-01

    Purpose: The biological optimization of proton therapy can be achieved only through a detailed evaluation of relative biological effectiveness (RBE) variations along the full range of the Bragg curve. The clinically used RBE value of 1.1 represents a broad average, which disregards the steep rise of linear energy transfer (LET) at the distal end of the spread-out Bragg peak (SOBP). With particular attention to the key endpoint of cell survival, our work presents a comparative investigation of cell killing RBE variations along monoenergetic (pristine) and modulated (SOBP) beams using human normal and radioresistant cells with the aim to investigate the RBE dependence on LET and intrinsic radiosensitvity. Methods and Materials: Human fibroblasts (AG01522) and glioma (U87) cells were irradiated at 6 depth positions along pristine and modulated 62-MeV proton beams at the INFN-LNS (Catania, Italy). Cell killing RBE variations were measured using standard clonogenic assays and were further validated using Monte Carlo simulations and the local effect model (LEM). Results: We observed significant cell killing RBE variations along the proton beam path, particularly in the distal region showing strong dose dependence. Experimental RBE values were in excellent agreement with the LEM predicted values, indicating dose-averaged LET as a suitable predictor of proton biological effectiveness. Data were also used to validate a parameterized RBE model. Conclusions: The predicted biological dose delivered to a tumor region, based on the variable RBE inferred from the data, varies significantly with respect to the clinically used constant RBE of 1.1. The significant RBE increase at the distal end suggests also a potential to enhance optimization of treatment modalities such as LET painting of hypoxic tumors. The study highlights the limitation of adoption of a constant RBE for proton therapy and suggests approaches for fast implementation of RBE models in treatment planning.

  5. Relative Biological Effectiveness Variation Along Monoenergetic and Modulated Bragg Peaks of a 62-MeV Therapeutic Proton Beam: A Preclinical Assessment

    International Nuclear Information System (INIS)

    Purpose: The biological optimization of proton therapy can be achieved only through a detailed evaluation of relative biological effectiveness (RBE) variations along the full range of the Bragg curve. The clinically used RBE value of 1.1 represents a broad average, which disregards the steep rise of linear energy transfer (LET) at the distal end of the spread-out Bragg peak (SOBP). With particular attention to the key endpoint of cell survival, our work presents a comparative investigation of cell killing RBE variations along monoenergetic (pristine) and modulated (SOBP) beams using human normal and radioresistant cells with the aim to investigate the RBE dependence on LET and intrinsic radiosensitvity. Methods and Materials: Human fibroblasts (AG01522) and glioma (U87) cells were irradiated at 6 depth positions along pristine and modulated 62-MeV proton beams at the INFN-LNS (Catania, Italy). Cell killing RBE variations were measured using standard clonogenic assays and were further validated using Monte Carlo simulations and the local effect model (LEM). Results: We observed significant cell killing RBE variations along the proton beam path, particularly in the distal region showing strong dose dependence. Experimental RBE values were in excellent agreement with the LEM predicted values, indicating dose-averaged LET as a suitable predictor of proton biological effectiveness. Data were also used to validate a parameterized RBE model. Conclusions: The predicted biological dose delivered to a tumor region, based on the variable RBE inferred from the data, varies significantly with respect to the clinically used constant RBE of 1.1. The significant RBE increase at the distal end suggests also a potential to enhance optimization of treatment modalities such as LET painting of hypoxic tumors. The study highlights the limitation of adoption of a constant RBE for proton therapy and suggests approaches for fast implementation of RBE models in treatment planning

  6. Measurement of fragment production DDX of 72 and 144 MeV 12C beam induced reaction on carbon using Bragg Curve Counter

    International Nuclear Information System (INIS)

    Double differential cross section (DDX) data of fragment production for 72 (6 MeV/nucleon) and 144 MeV (12 MeV/nucleon) 12C beam induced reaction on carbon were measured using a Bragg Curve Counter (BCC). The DDX data were obtained for fragments of He, Li, Be, B, C, N and O at 30 degree emission angle. Theoretical calculation using PHITS code with QMD+GEM model represents the DDX well except for components from reactions of direct process and α particle clustering process. (author)

  7. Comparative Analysis of Biologically Relevant Response Curves in Gene Expression Experiments: Heteromorphy, Heterochrony, and Heterometry

    OpenAIRE

    Baker, Stuart G.

    2014-01-01

    To gain biological insights, investigators sometimes compare sequences of gene expression measurements under two scenarios (such as two drugs or species). For this situation, we developed an algorithm to fit, identify, and compare biologically relevant response curves in terms of heteromorphy (different curves), heterochrony (different transition times), and heterometry (different magnitudes). The curves are flat, linear, sigmoid, hockey-stick (sigmoid missing a steady state), transient (sigm...

  8. The effects of the Bragg curve on the nuclear track formation in CR-39 polycarbonate, with the atomic force microscopy approach

    OpenAIRE

    C. Vázquez-López; B.E. Zendejas-Leal; R. Fragoso; J. I. Golzarri; Espinosa, G.

    2013-01-01

    The etching nuclear track parameters were analyzed, using atomic force microscopy (AFM), allowing the simulation of the nuclear track profiles evolution. For these experiments, CR-39 (LantrackTM) was chosen, because the excellent energy response to alpha particles. Due to the AFM limitations, it was necessary to reduce the incident particle energy in order to reach the Bragg peak region in the AFM scanning process. The different profile shapes of the etched tracks were clearly observed in the...

  9. Heavy ion induced damage to plasmid DNA: plateau region vs. spread out Bragg-peak

    Science.gov (United States)

    Dang, H. M.; van Goethem, M. J.; van der Graaf, E. R.; Brandenburg, S.; Hoekstra, R.; Schlathölter, T.

    2011-08-01

    We have investigated the damage of synthetic plasmid pBR322 DNA in dilute aqueous solutions induced by fast carbon ions. The relative contribution of indirect damage and direct damage to the DNA itself is expected to vary with linear energy transfer along the ion track, with the direct damage contribution increasing towards the Bragg peak. Therefore, 12C ions at the spread-out Bragg peak (dose averaged LET∞ = 189 ± 15 keV/ μm) and in the plateau region of the Bragg curve (LET = 40 keV/ μm) were employed and the radical scavenger concentration in the plasmid solution was varied to quantify the indirect effect. In order to minimize the influence of 12C break-up fragments, a relatively low initial energy of 90 MeV/nucleon was employed for the carbon ions. DNA damage has been quantified by subsequent electrophoresis on agarose gels. We find that strand breaks due to both indirect and direct effects are systematically higher in the plateau region as compared to the Bragg peak region with the difference being smallest at high scavenging capacities. In view of the fact that the relative biological effectiveness for many biological endpoints is maximum at the Bragg peak our findings imply that DNA damage at the Bragg peak is qualitatively most severe.

  10. Heavy ion induced damage to plasmid DNA: plateau region vs. spread out Bragg-peak

    Energy Technology Data Exchange (ETDEWEB)

    Dang, H.M.; Van Goethem, M.J.; Van der Graaf, E.R.; Brandenburg, S.; Hoekstra, R.; Schlatholtera, T. [KVI University of Groningen, Zernikelaan 25, 9747AA Groningen (Netherlands)

    2011-08-15

    We have investigated the damage of synthetic plasmid pBR322 DNA in dilute aqueous solutions induced by fast carbon ions. The relative contribution of indirect damage and direct damage to the DNA itself is expected to vary with linear energy transfer along the ion track, with the direct damage contribution increasing towards the Bragg peak. Therefore, {sup 12}C ions at the spread-out Bragg peak (dose averaged LET{sub {infinity} }= (189 {+-} 15) keV/{mu}m) and in the plateau region of the Bragg curve (LET = 40 keV/{mu}m) were employed and the radical scavenger concentration in the plasmid solution was varied to quantify the indirect effect. In order to minimize the influence of {sup 12}C break-up fragments, a relatively low initial energy of 90 MeV/nucleon was employed for the carbon ions. DNA damage has been quantified by subsequent electrophoresis on agarose gels. We find that strand breaks due to both indirect and direct effects are systematically higher in the plateau region as compared to the Bragg peak region with the difference being smallest at high scavenging capacities. In view of the fact that the relative biological effectiveness for many biological endpoints is maximum at the Bragg peak our findings imply that DNA damage at the Bragg peak is qualitatively most severe. (authors)

  11. Heavy ion induced damage to plasmid DNA: plateau region vs. spread out Bragg-peak

    International Nuclear Information System (INIS)

    We have investigated the damage of synthetic plasmid pBR322 DNA in dilute aqueous solutions induced by fast carbon ions. The relative contribution of indirect damage and direct damage to the DNA itself is expected to vary with linear energy transfer along the ion track, with the direct damage contribution increasing towards the Bragg peak. Therefore, 12C ions at the spread-out Bragg peak (dose averaged LET∞ = (189 ± 15) keV/μm) and in the plateau region of the Bragg curve (LET = 40 keV/μm) were employed and the radical scavenger concentration in the plasmid solution was varied to quantify the indirect effect. In order to minimize the influence of 12C break-up fragments, a relatively low initial energy of 90 MeV/nucleon was employed for the carbon ions. DNA damage has been quantified by subsequent electrophoresis on agarose gels. We find that strand breaks due to both indirect and direct effects are systematically higher in the plateau region as compared to the Bragg peak region with the difference being smallest at high scavenging capacities. In view of the fact that the relative biological effectiveness for many biological endpoints is maximum at the Bragg peak our findings imply that DNA damage at the Bragg peak is qualitatively most severe. (authors)

  12. Comparative Analysis of Biologically Relevant Response Curves in Gene Expression Experiments: Heteromorphy, Heterochrony, and Heterometry

    Directory of Open Access Journals (Sweden)

    Stuart G. Baker

    2014-02-01

    Full Text Available To gain biological insights, investigators sometimes compare sequences of gene expression measurements under two scenarios (such as two drugs or species. For this situation, we developed an algorithm to fit, identify, and compare biologically relevant response curves in terms of heteromorphy (different curves, heterochrony (different transition times, and heterometry (different magnitudes. The curves are flat, linear, sigmoid, hockey-stick (sigmoid missing a steady state, transient (sigmoid missing two steady states, impulse (with peak or trough, step (with intermediate-level plateau, impulse+ (impulse with an extra parameter, step+ (step with an extra parameter, further characterized by upward or downward trend. To reduce overfitting, we fit the curves to every other response, evaluated the fit in the remaining responses, and identified the most parsimonious curves that yielded a good fit. We measured goodness of fit using a statistic comparable over different genes, namely the square root of the mean squared prediction error as a percentage of the range of responses, which we call the relative prediction error (RPE. We illustrated the algorithm using data on gene expression at 14 times in the embryonic development in two species of frogs. Software written in Mathematica is freely available.

  13. Calibration curves for biological dosimetry; Curvas de calibracion para dosimetria biologica

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero C, C.; Brena V, M. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)]. E-mail cgc@nuclear.inin.mx

    2004-07-01

    The generated information by the investigations in different laboratories of the world, included the ININ, in which settles down that certain class of chromosomal leisure it increases in function of the dose and radiation type, has given by result the obtaining of calibrated curves that are applied in the well-known technique as biological dosimetry. In this work is presented a summary of the work made in the laboratory that includes the calibrated curves for gamma radiation of {sup 60} Cobalt and X rays of 250 k Vp, examples of presumed exposure to ionizing radiation, resolved by means of aberration analysis and the corresponding dose estimate through the equations of the respective curves and finally a comparison among the dose calculations in those people affected by the accident of Ciudad Juarez, carried out by the group of Oak Ridge, USA and those obtained in this laboratory. (Author)

  14. Multiparametric imaging of biological systems by force-distance curve-based AFM.

    Science.gov (United States)

    Dufrêne, Yves F; Martínez-Martín, David; Medalsy, Izhar; Alsteens, David; Müller, Daniel J

    2013-09-01

    A current challenge in the life sciences is to understand how biological systems change their structural, biophysical and chemical properties to adjust functionality. Addressing this issue has been severely hampered by the lack of methods capable of imaging biosystems at high resolution while simultaneously mapping their multiple properties. Recent developments in force-distance (FD) curve-based atomic force microscopy (AFM) now enable researchers to combine (sub)molecular imaging with quantitative mapping of physical, chemical and biological interactions. Here we discuss the principles and applications of advanced FD-based AFM tools for the quantitative multiparametric characterization of complex cellular and biomolecular systems under physiological conditions. PMID:23985731

  15. The Relative Biologic Effectiveness versus Linear Energy Transfer Curve as a Cell Trait

    OpenAIRE

    Quoc T. Luu; Paul DuChateau

    2013-01-01

    The magnitude of biological response varies with different radiation types. Using Linear Energy Transfer (LET) to differentiate types of incident radiation beam, the Relative Biologic Effectiveness (RBE) as a function of LET (RBE-LET) was found to have a characteristic shape with a peak around LET values 100 - 200 eV/nm. This general feature is believed to be a property of the incident beam. Our systems engineering model, however, suggests that the shape of the RBE-LET curve is a cell tr...

  16. Similarity criterion analysis of dose-response curves in biological assay and radioimmunoassay of hormones

    International Nuclear Information System (INIS)

    The difficulties involved in the control of biological and radioimmunological assay systems, and in the maintenance of standard, as well as, the usual heterogeneity of assayed samples require some evidence of similarity between the dose-response curves obtained with the standard and the sample. Nowadays the parallelism test is used to provide such evidence. However, some indications of non-normal errors distribution, such as the presence of out layers, render the parallelism test both conceptually implausible and statistically inefficient. In such a manner we suggest the non-parametric 'frequencial' test as a more sounding option. (author)

  17. Irradiation of biological molecules (DNA and RNA bases) by proton impact in the velocity range of the Bragg peak (20-150 keV/amu)

    International Nuclear Information System (INIS)

    The aim of this work was to study the ionization of DNA and RNA base molecules by proton impact at energies between 20 and 150 keV/amu. The experiments developed over the course of this project made it possible not only to study the fragmentation of uracil, thymine, adenine, and cytosine, but also to measure absolute cross sections for different ionization processes initiated by proton interactions with these important biological molecules. Firstly, the experimental system enabled the contributions of two key ionization processes to be separated: direct ionization and electron capture. The corresponding mass spectra were measured and analyzed on an event-by-event basis. For uracil, the branching ratios for these two processes were measured as function of the projectile velocity. Secondly, we have developed a system to measure absolute cross sections for the electron capture process. The production rate of neutral atoms compared to protons was measured for the four biological molecules: uracil, cytosine, thymine, and adenine at different vaporization temperatures. This production rate varies as a function of the thickness of the target jet traversed by the protons. Accordingly, a deposit experiment was developed in order to characterize the density of molecules in the targeted gas jets. Theoretical and experimental study of the total effusion and density-profile of the gaseous molecular beams enabled us to deduce the thickness of the target jets traversed by the protons. Thus it was possible to determine absolute cross sections for the ionization of each of the four isolated biological molecules by 80 keV protons impact. To our knowledge, this work provides the first experimental absolute cross sections for DNA and RNA base ionization processes initiated by proton impact in the velocity range corresponding to the Bragg peak. (author)

  18. Biological dosimetry in radiological protection: dose response curves elaboration for 60Co and 137Cs

    International Nuclear Information System (INIS)

    Ionizing radiation sources for pacific uses are being extensively utilized by modern society and the applications of these sources have raised the probability of the occurrence of accidents. The accidental exposition to radiation creates a necessity of the development of methods to evaluate dose quantity. This data could be obtained by the measurement of damage caused by radiation in the exposed person. The radiation dose can be estimated in exposed persons through physical methods (physical dosimetry) but the biological methods can't be dispensed, and among them, the cytogenetic one that makes use of chromosome aberrations (dicentric and centric ring) formed in peripheral blood lymphocytes (PBL) exposed to ionizing radiation. This method correlates the frequency of radioinduced aberrations with the estimated absorbed dose, as in vitro as in vivo, which is called cytogenetic dosimetry. By the introduction of improved new techniques in culture, in the interpretation of aberrations in the different analysers of slides and by the adoption of different statistical programs to analyse the data, significant differences are observed among laboratories in dose-response curves (calibration curves). The estimation of absorbed dose utilizing other laboratory calibration curves may introduce some uncertainties, so the International Atomic Energy Agency (IAEA) advises that each laboratory elaborates your own dose-response curve for cytogenetic dosimetry. The results were obtained from peripheral blood lymphocytes of the healthy and no-smoking donors exposed to 60Co and 137Cs radiation, with dose rate of 5 cGy.min.-1. Six points of dose were determined 20,50,100,200,300,400 cGy and the control not irradiated. The analysed aberrations were of chromosomic type, dicentric and centric ring. The dose response curve for dicentrics were obtained by frequencies weighted in liner-quadratic mathematic model and the equation resulted were for 60Co: Y = (3 46 +- 2.14)10-4 cGy-1 + (3.45 +- 0

  19. Biological effects in lymphocytes irradiated with 99mTc: determination of the curve dose-response

    International Nuclear Information System (INIS)

    Biological dosimetry estimates the absorbed dose taking into account changes in biological parameters. The most used biological indicator of an exposition to ionizing radiation is the quantification of chromosomal aberrations of lymphocytes from irradiated individuals. The curves of dose versus induced biological effects, obtained through bionalyses, are used in used in retrospective evaluations of the dose, mainly in the case of accidents. In this research, a simple model for electrons and photons transports was idealized to simulate the irradiation of lymphocytes with 99m Tc, representing a system used for irradiation of blood cells. The objective of the work was to establish a curve of dose versus frequencies of chromosomal aberrations in lymphocytes of human blood. For the irradiation of blood samples micro spheres of human serum of albumin (HSAM) market with 99m Tc were used, allowing the irradiation of blood with different administered activities of 99m Tc, making possible the study the cytogenetical effects as a function of such activities. The conditions of irradiation in vivo using HSAM spheres marked with 99m Tc were simulated with MCNP 4C (Monte Carlo N-Particle) code to obtain the dose-response curve. Soft tissue composition was employed to simulate blood tissue and the analyses of the curve of dose versus biological effect showed a linear quadratic response of the unstable chromosomal aberrations. As a result, the response of dose versus chromosomal aberrations of blood irradiation with 99m Tc was best fitted by the curve Y=(8,99 ±2,06) x 1--4 + (1,24 ±0,62) x 10-2 D + (5,67 ± 0,64) x 10-2 D2. (author)

  20. Are Bragg Peaks Gaussian?

    OpenAIRE

    Hammouda, Boualem

    2014-01-01

    It is common practice to assume that Bragg scattering peaks have Gaussian shape. The Gaussian shape function is used to perform most instrumental smearing corrections. Using Monte Carlo ray tracing simulation, the resolution of a realistic small-angle neutron scattering (SANS) instrument is generated reliably. Including a single-crystal sample with large d-spacing, Bragg peaks are produced. Bragg peaks contain contributions from the resolution function and from spread in the sample structure....

  1. Bragg grating rogue wave

    CERN Document Server

    Degasperis, Antonio; Aceves, Alejandro B

    2015-01-01

    We derive the rogue wave solution of the classical massive Thirring model, that describes nonlinear optical pulse propagation in Bragg gratings. Combining electromagnetically induced transparency with Bragg scattering four-wave mixing, may lead to extreme waves at extremely low powers.

  2. Bragg grating rogue wave

    Energy Technology Data Exchange (ETDEWEB)

    Degasperis, Antonio [Dipartimento di Fisica, “Sapienza” Università di Roma, P.le A. Moro 2, 00185 Roma (Italy); Wabnitz, Stefan, E-mail: stefan.wabnitz@unibs.it [Dipartimento di Ingegneria dell' Informazione, Università degli Studi di Brescia and INO-CNR, via Branze 38, 25123 Brescia (Italy); Aceves, Alejandro B. [Southern Methodist University, Dallas (United States)

    2015-06-12

    We derive the rogue wave solution of the classical massive Thirring model, that describes nonlinear optical pulse propagation in Bragg gratings. Combining electromagnetically induced transparency with Bragg scattering four-wave mixing may lead to extreme waves at extremely low powers.

  3. Biological radiation dose estimation by chromosomal aberrations analysis in human peripheral blood (dose-effect curve)

    International Nuclear Information System (INIS)

    In order to draw a dose-effect curve, experimentally gamma ray induced chromosomal aberrations in human peripheral lymphocytes from eight healthy people were studied. Samples from 4 males and 4 females were irradiated in tubes with 0.15, 0.25, 0.5, 1, 1.5, 2, 2.5 gray of gamma ray (Co60 at dose rate 0.3 Gy/min). Irradiated and control samples were incubated in 37 centigrade for 48 hours cell cultures. Cell cultures then were stopped and metaphases spread, Giemsa stained to score the induced chromosomal aberrations. Chromosomal aberrations from 67888 metaphases were scored. Curves from the total number of dicentrics, dicentrics + rings and total numbers of breaks in cell for each individual or for all people were drawn. An increase of all chromosomal aberrations types with the elevation of the doses was observed. The yield of chromosome aberrations is related to the dose used. These curves give a quick useful estimation of the accidentally radiation exposure. (author)

  4. Dispersion blue-shift in an aperiodic Bragg reflection waveguide

    Science.gov (United States)

    Fesenko, Volodymyr I.; Tuz, Vladimir R.

    2016-04-01

    A particular feature of an aperiodic design of cladding of Bragg reflection waveguides to demonstrate a dispersion blue-shift is elucidated. It is made on the basis of a comparative study of dispersion characteristics of both periodic and aperiodic configurations of Bragg mirrors in the waveguide system, wherein for the aperiodic configuration three procedures for layers alternating, namely Fibonacci, Thue-Morse and Kolakoski substitutional rules are considered. It was found out that, in a Bragg reflection waveguide with any considered aperiodic cladding, dispersion curves of guided modes appear to be shifted to shorter wavelengths compared to the periodic configuration regardless of the modes polarization.

  5. Dispersion blue-shift in an aperiodic Bragg reflection waveguide

    CERN Document Server

    Fesenko, Volodymyr I

    2016-01-01

    A particular feature of an aperiodic design of cladding of Bragg reflection waveguides to demonstrate a dispersion blue-shift is elucidated. It is made on the basis of a comparative study of dispersion characteristics of both periodic and aperiodic configurations of Bragg mirrors in the waveguide system, wherein for the aperiodic configuration three procedures for layers alternating, namely Fibonacci, Thue-Morse and Kolakoski substitutional rules are considered. It was found out that, in a Bragg reflection waveguide with any considered aperiodic cladding, dispersion curves of guided modes appear to be shifted to shorter wavelengths compared to the periodic configuration regardless of the modes polarization.

  6. Biological properties of differently-aged human keratinocytes:population doubling time growth curve and cell cycle analysis

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Objective To explore the biological properties of keratinocytes from differently-aged healthy human beings. Methods Keratinocytes from fetus,teenager and middle-aged groups were separated and cultured. The population doubling time (PDT) and cell growth curve in different cells were compared,and the cell cycles were analyzed by flow cytometry. Results ① In primary culture of keratinocytes,the adherence time in middle-aged group was longer than that in fetus and teenager groups. However,all cell morphology sh...

  7. Comparison of Model Calculations of Biological Damage from Exposure to Heavy Ions with Measurements

    Science.gov (United States)

    Kim, Myung-Hee Y.; Hada, Megumi; Cucinotta, Francis A.; Wu, Honglu

    2014-01-01

    The space environment consists of a varying field of radiation particles including high-energy ions, with spacecraft shielding material providing the major protection to astronauts from harmful exposure. Unlike low-LET gamma or X rays, the presence of shielding does not always reduce the radiation risks for energetic charged-particle exposure. Dose delivered by the charged particle increases sharply at the Bragg peak. However, the Bragg curve does not necessarily represent the biological damage along the particle path since biological effects are influenced by the track structures of both primary and secondary particles. Therefore, the ''biological Bragg curve'' is dependent on the energy and the type of the primary particle and may vary for different biological end points. Measurements of the induction of micronuclei (MN) have made across the Bragg curve in human fibroblasts exposed to energetic silicon and iron ions in vitro at two different energies, 300 MeV/nucleon and 1 GeV/nucleon. Although the data did not reveal an increased yield of MN at the location of the Bragg peak, the increased inhibition of cell progression, which is related to cell death, was found at the Bragg peak location. These results are compared to the calculations of biological damage using a stochastic Monte-Carlo track structure model, Galactic Cosmic Ray Event-based Risk Model (GERM) code (Cucinotta, et al., 2011). The GERM code estimates the basic physical properties along the passage of heavy ions in tissue and shielding materials, by which the experimental set-up can be interpreted. The code can also be used to describe the biophysical events of interest in radiobiology, cancer therapy, and space exploration. The calculation has shown that the severely damaged cells at the Bragg peak are more likely to go through reproductive death, the so called "overkill".

  8. Study on position sensitive Bragg detector

    International Nuclear Information System (INIS)

    A position sensitive Bragg Curve Spectroscopy (PS-BCS) for heavy ion identification is introduced. The position signal is extracted via an auxiliary grid (P grid) between the anode and the Frisch grid. The position is determined by the wires. The charge division method have been used for position read-out. The test results of the detector with 252Cf α source have shown a position resolution ΔX<9 mm

  9. Population variability in biological adaptive responses to DNA damage and the shapes of carcinogen dose-response curves

    International Nuclear Information System (INIS)

    Carcinogen dose-response curves for both ionizing radiation and chemicals are typically assumed to be linear at environmentally relevant doses. This assumption is used to ensure protection of the public health in the absence of relevant dose-response data. A theoretical justification for the assumption has been provided by the argument that low dose linearity is expected when an exogenous agent adds to an ongoing endogenous process. Here, we use computational modeling to evaluate (1) how two biological adaptive processes, induction of DNA repair and cell cycle checkpoint control, may affect the shapes of dose-response curves for DNA-damaging carcinogens and (2) how the resulting dose-response behaviors may vary within a population. Each model incorporating an adaptive process was capable of generating not only monotonic dose-responses but also nonmonotonic (J-shaped) and threshold responses. Monte Carlo analysis suggested that all these dose-response behaviors could coexist within a population, as the spectrum of qualitative differences arose from quantitative changes in parameter values. While this analysis is largely theoretical, it suggests that (a) accurate prediction of the qualitative form of the dose-response requires a quantitative understanding of the mechanism (b) significant uncertainty is associated with human health risk prediction in the absence of such quantitative understanding and (c) a stronger experimental and regulatory focus on biological mechanisms and interindividual variability would allow flexibility in regulatory treatment of environmental carcinogens without compromising human health

  10. Biological properties of differently-aged human keratinocytes:population doubling time growth curve and cell cycle analysis

    Institute of Scientific and Technical Information of China (English)

    Hui-qun Ma; Jie Feng; Lech Chyczewski; Jacek Niklinski

    2009-01-01

    Objective To explore the biological properties of keratinocytes from differently-aged healthy human beings. Methods Keratinocytes from fetus, teenager and middle-aged groups were separated and cultured. The population doubling time (PDT) and cell growth curve in different cells were compared, and the cell cycles were analyzed by flow cytometry. Results ① In primary culture of keratinocytes, the adherence time in middle-aged group was longer than that in fetus and teenager groups. However, all cell morphology showed no obvioas differences. In subculture of kecatinocytes, with donator's age increasing, time of cell adherence prolonged, passage number decreused and differences in cell morphology were obrioas. ② The average PDT of keratinocytes was shorter in fetus group than in teenager and middle-aged groups. Bat difference in cell growth curve between different passages was not observed. ③ Keratinocytes showed G2/M period in fetus group but G0/G1 period in teenager and middle-aged groups mainly. Conclusion As age increases, the biological properties of keratinocytes change obviously.

  11. Influence of Non-uniform Temperature Field on Spectra of Fibre Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yan; HE Xing-Fang; YUAN Jie; YIN Li-Qun; FANG Xiao-Yong; CAO Mao-Sheng

    2009-01-01

    We simulate the spectrum characteristics of fibre Bragg grating (FBG) with non-uniform temperature using the transmission matrix method, and the results are analysed. It is found that firstly the modulated coefficient of average refractive index is a very important parameter that influences the spectrum characteristic of the fibre Bragg grating, and secondly the spectrum curves are different in different temperature fields at the same parameter. Hence, we can determine the metrical temperature by analysing the spectrum of fibre Bragg grating.

  12. Supersymmetric Bragg gratings

    International Nuclear Information System (INIS)

    The supersymmetric (SUSY) structure of coupled-mode equations that describe scattering of optical waves in one-dimensional Bragg gratings is highlighted. This property can find applications to the synthesis of special Bragg filters and distributed-feedback (DFB) optical cavities. In particular, multiple SUSY (Darboux–Crum) transformations can be used to synthesize DFB filters with any desired number of resonances at target frequencies. As an example, we describe the design of a DFB structure with a set of equally-spaced resonances, i.e. a frequency comb transmission filter. (paper)

  13. Double Bragg Interferometry.

    Science.gov (United States)

    Ahlers, H; Müntinga, H; Wenzlawski, A; Krutzik, M; Tackmann, G; Abend, S; Gaaloul, N; Giese, E; Roura, A; Kuhl, R; Lämmerzahl, C; Peters, A; Windpassinger, P; Sengstock, K; Schleich, W P; Ertmer, W; Rasel, E M

    2016-04-29

    We employ light-induced double Bragg diffraction of delta-kick collimated Bose-Einstein condensates to create three symmetric Mach-Zehnder interferometers. They rely on (i) first-order, (ii) two successive first-order, and (iii) second-order processes which demonstrate the scalability of the corresponding momentum transfer. With respect to devices based on conventional Bragg scattering, these symmetric interferometers double the scale factor and feature a better suppression of noise and systematic uncertainties intrinsic to the diffraction process. Moreover, we utilize these interferometers as tiltmeters for monitoring their inclination with respect to gravity. PMID:27176520

  14. Silicon graphene Bragg gratings

    OpenAIRE

    Capmany, Jose; Domenech, David; Munoz, Pascual

    2013-01-01

    We propose the use of interleaved graphene sections on top of a silicon waveguide to implement tunable Bragg gratings. The filter central wavelength and bandwidth can be controlled changing the chemical potential of the graphene sections. Apodization techniques are also presented.

  15. Growth Curve Models for the Analysis of Phenotype Arrays for a Systems Biology Overview of Yersinia pestis

    Energy Technology Data Exchange (ETDEWEB)

    Fodor, I K; Holtz-Morris, A E; McCutchen-Maloney, S L

    2005-09-08

    The Phenotype MicroArray technology of Biolog, Inc. (Hayward, CA) measures the respiration of cells as a function of time in thousands of microwells simultaneously, and thus provides a high-throughput means of studying cellular phenotypes. The microwells contain compounds involved in a number of biochemical pathways, as well as chemicals that test the sensitivity of cells against antibiotics and stress. While the PM experimental workflow is completely automated, statistical methods to analyze and interpret the data are lagging behind. To take full advantage of the technology, it is essential to develop efficient analytical methods to quantify the information in the complex datasets resulting from PM experiments. We propose the use of statistical growth-curve models to rigorously quantify observed differences in PM experiments, in the context of the growth and metabolism of Yersinia pestis cells grown under different physiological conditions. The information from PM experiments complement genomic and proteomic results and can be used to identify gene function and in drug development. Successful coupling of phenomics results with genomics and proteomics will lead to an unprecedented ability to characterize bacterial function at a systems biology level.

  16. Bragg reflection program

    International Nuclear Information System (INIS)

    This user's guide to the Bragg Reflection Program (BRP) is in the nature of an informal report. The general purpose of BRP is to scan a series of Bragg reflections automatically in order to obtain profiles and integrated intensities. The program is used in conjunction with the SUPERVISOR and READ packages, and the procedures for using it are similar to those for the Triple-Axis Control program. All the general features of the system, SUPERVISOR and READ packages as described in the Spectrometer Control Systems User's Guide are preserved. The presentation assumes that the reader is familiar with these. Sections are given on the READ package, execution and use, error messages, and output. A few sample problems are shown. (1 figure) (U.S.)

  17. MEMS Bragg grating force sensor

    DEFF Research Database (Denmark)

    Reck, Kasper; Thomsen, Erik Vilain; Hansen, Ole

    2011-01-01

    We present modeling, design, fabrication and characterization of a new type of all-optical frequency modulated MEMS force sensor based on a mechanically amplified double clamped waveguide beam structure with integrated Bragg grating. The sensor is ideally suited for force measurements in harsh...... environments and for remote and distributed sensing and has a measured sensitivity of -14 nm/N, which is several times higher than what is obtained in conventional fiber Bragg grating force sensors. © 2011 Optical Society of America....

  18. Bragg transmission phase plates for the production of circularly polarized x-rays

    International Nuclear Information System (INIS)

    A thin-crystal Si (400) Bragg transmission x-ray phase plate has been constructed for the production of 5 to 12 keV circularly polarized x-rays. Using multiple beam diffraction from a GaAs crystal, a direct measurement of the degree of circular polarization as a function of off-Bragg position was made. These measurements indicated nearly complete circular polarization (|Pc| ≥ 0.95) and full helicity reversal on opposite sides of the rocking curve

  19. Configuration of the Hemoglobin Oxygen Dissociation Curve Demystified: A Basic Mathematical Proof for Medical and Biological Sciences Undergraduates

    Science.gov (United States)

    Leow, Melvin Khee-Shing

    2007-01-01

    The oxygen dissociation curve (ODC) of hemoglobin (Hb) has been widely studied and mathematically described for nearly a century. Numerous mathematical models have been designed to predict with ever-increasing accuracy the behavior of oxygen transport by Hb in differing conditions of pH, carbon dioxide, temperature, Hb levels, and…

  20. Bomb-curve radiocarbon measurement of recent biologic tissues and applications to wildlife forensics and stable isotope (paleo)ecology

    OpenAIRE

    Uno, Kevin T.; Quade, Jay; Fisher, Daniel C.; Wittemyer, George; Douglas-Hamilton, Iain; Andanje, Samuel; Omondi, Patrick; Litoroh, Moses; Cerling, Thure E.

    2013-01-01

    Above-ground thermonuclear weapons testing from 1952 through 1962 nearly doubled the concentration of radiocarbon (14C) in the atmosphere. As a result, organic material formed during or after this period may be radiocarbon-dated using the abrupt rise and steady fall of the atmospheric 14C concentration known as the bomb-curve. We test the accuracy of accelerator mass spectrometry radiocarbon dating of 29 herbivore and plant tissues collected on known dates between 1905 and 2008 in East Africa...

  1. Polymer optical fiber bragg grating sensors

    DEFF Research Database (Denmark)

    Stefani, Alessio; Yuan, Scott Wu; Andresen, Søren;

    2010-01-01

    Fiber-optical accelerometers based on polymer optical fiber Bragg gratings are reported. We have written fiber Bragg gratings for 1550 nm and 850 nm operations, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

  2. Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

    Institute of Scientific and Technical Information of China (English)

    LI Lin; LI Yong-da; LIU Wen-li; LU Bin; JU Guo-xian; ZHANG Yong-ming; HAO Yong-qin; SU Wei; ZHONG Jing-chang

    2004-01-01

    Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured.Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.

  3. UV effects on the primary productivity of picophytoplankton: biological weighting functions and exposure response curves of Synechococcus

    OpenAIRE

    Neale, P.J.; A. L. Pritchard; R. Ihnacik

    2014-01-01

    A model that predicts UV effects on marine primary productivity using a biological weighting function (BWF) coupled to the photosynthesis–irradiance response (BWF/P-E model) has been implemented for two strains of the picoplanktonic cyanobacteria Synechococcus, WH7803 and WH8102, which were grown at two irradiances (77 and 174 μmol m−2 s−1 photosynthetically available radiation (PAR)) and two temperatures (20 and 26 °C). The model was fit using photosynthesis measured in a ...

  4. Bomb-curve radiocarbon measurement of recent biologic tissues and applications to wildlife forensics and stable isotope (paleo)ecology

    Science.gov (United States)

    Uno, Kevin T.; Quade, Jay; Fisher, Daniel C.; Wittemyer, George; Douglas-Hamilton, Iain; Andanje, Samuel; Omondi, Patrick; Litoroh, Moses; Cerling, Thure E.

    2013-07-01

    Above-ground thermonuclear weapons testing from 1952 through 1962 nearly doubled the concentration of radiocarbon (14C) in the atmosphere. As a result, organic material formed during or after this period may be radiocarbon-dated using the abrupt rise and steady fall of the atmospheric 14C concentration known as the bomb-curve. We test the accuracy of accelerator mass spectrometry radiocarbon dating of 29 herbivore and plant tissues collected on known dates between 1905 and 2008 in East Africa. Herbivore samples include teeth, tusks, soft tissue, hair, and horn. Tissues formed after 1955 are dated to within 0.3-1.3 y of formation, depending on the tissue type, whereas tissues older than ca. 1955 have high age uncertainties (>17 y) due to the Suess effect. 14C dating of tissues has applications to stable isotope (paleo)ecology and wildlife forensics. We use data from 41 additional samples to determine growth rates of tusks, molars, and hair, which improve interpretations of serial stable isotope data for (paleo)ecological studies. 14C dating can also be used to calculate the time interval represented in periodic histological structures in dental tissues (i.e., perikymata), which in turn may be used as chronometers in fossil teeth. Bomb-curve 14C dating of confiscated animal tissues (e.g., ivory statues) can be used to determine whether trade of the item is legal, because many Convention of International Trade of Endangered Species restrictions are based on the age of the tissue, and thus can serve as a powerful forensic tool to combat illegal trade in animal parts.

  5. Bomb-curve radiocarbon measurement of recent biologic tissues and applications to wildlife forensics and stable isotope (paleo)ecology.

    Science.gov (United States)

    Uno, Kevin T; Quade, Jay; Fisher, Daniel C; Wittemyer, George; Douglas-Hamilton, Iain; Andanje, Samuel; Omondi, Patrick; Litoroh, Moses; Cerling, Thure E

    2013-07-16

    Above-ground thermonuclear weapons testing from 1952 through 1962 nearly doubled the concentration of radiocarbon ((14)C) in the atmosphere. As a result, organic material formed during or after this period may be radiocarbon-dated using the abrupt rise and steady fall of the atmospheric (14)C concentration known as the bomb-curve. We test the accuracy of accelerator mass spectrometry radiocarbon dating of 29 herbivore and plant tissues collected on known dates between 1905 and 2008 in East Africa. Herbivore samples include teeth, tusks, soft tissue, hair, and horn. Tissues formed after 1955 are dated to within 0.3-1.3 y of formation, depending on the tissue type, whereas tissues older than ca. 1955 have high age uncertainties (>17 y) due to the Suess effect. (14)C dating of tissues has applications to stable isotope (paleo)ecology and wildlife forensics. We use data from 41 additional samples to determine growth rates of tusks, molars, and hair, which improve interpretations of serial stable isotope data for (paleo)ecological studies. (14)C dating can also be used to calculate the time interval represented in periodic histological structures in dental tissues (i.e., perikymata), which in turn may be used as chronometers in fossil teeth. Bomb-curve (14)C dating of confiscated animal tissues (e.g., ivory statues) can be used to determine whether trade of the item is legal, because many Convention of International Trade of Endangered Species restrictions are based on the age of the tissue, and thus can serve as a powerful forensic tool to combat illegal trade in animal parts. PMID:23818577

  6. Extending Bragg peak of heavy ion beam and melanoma cell inactivation measurement

    Institute of Scientific and Technical Information of China (English)

    LiQiang; WeiZeng-Quan; 等

    1998-01-01

    A rotating range modulator was designed and manufactured.which is applied to extend Bragg peak of heavy ion beam.Bragg curves of 75MeV/u 16O and 75MeV/u 12C ion beams through this range modulator were measured respectively and two evident spread-out Bragg peaks corresponding to the modulated beams above are shown.In addition,inactivation effect of the modulated 75MeV/u 16O ion beam at nine different penetration depths on melanoma cells(B16) was measured.Results indicate that lethal effects at the spread-out Bragg peak region are larger than at the plateau of the particle beam entrance.

  7. Space Curves

    CERN Document Server

    Peskine, Christian; Sernesi, Edoardo

    1987-01-01

    The main topics of the conference on "Curves in Projective Space" were good and bad families of projective curves, postulation of projective space curves and classical problems in enumerative geometry.

  8. The Bragg Crystal Spectrometer for AXAF

    International Nuclear Information System (INIS)

    MIT's High Resolution X-ray Spectroscopy investigation on AXAF involves two complementary dispersive instruments, a Bragg Crystal Spectrometer (BCS) and a High Energy Transmission Grating Spectrometer (HETGS). The overall goal of the investigation is to study the physical conditions in celestial sources by means of detailed measurements of their X-ray spectra. High spectral resolution measurements can be used to perform diagnostics of emitting and absorbing matter, leading to knowledge of temperature, ionization state, elemental abundance, density and optical depth. The Bragg Crystal Spectrometer gives resolving powers of 200-2000 over the energy band 0.5-8 keV and resolving powers of 50-70 over 0.14-0.5 keV. The effective collecting areas in a typical scanning observation are 4-60 cm/sup 2/, and the minimum detectable line flux is 4-30 X 10/sup -6/ photons cm/sup -2/ s/sup -1/. The BCS will be located at the AXAF focal plane. The instrument consists of 10 curved diffractors each of which has a quasi-toroidal geometry, two types of imaging proportional counters optimized for low background (one sealed and one flow), an internal monitor counter that can be inserted into the beam to measure total source flux, a mechanical system that maintains Rowland circle geometry and an appropriate command and data system. The BCS is an upgraded and improved version of the Focal Plane Crystal Spectrometer flown on the Einstein Observatory. It will be used to measure the strengths of individual lines from both point and extended objects in order to apply plasma diagnostic techniques to the study of cosmic X-ray sources

  9. Response of a biological model to a proton beam in vivo

    International Nuclear Information System (INIS)

    Wistar rats were locally irradiated with proton beams. By means of a plastic wedge used as an energy degradator of variable thickness, dorsal portions of skin were irradiated at several tissue depths. This model was used to perform proton irradiations with different doses in both the plateau and the Bragg portions of the Bragg curve. The particular geometry of the wedge, in which the maximum thickness is greater than the proton range, yields a portion of unaffected tissue included in the irradiated area. Thus, it was possible to obtain a reference zone contiguous to the affected area in the same animal. SSNTD were used to establish the spatial configuration and the dose of the proton beams. This methodology allows isodose curve calculations along the different tissue depths which are in agreement with the biologic effects observed. Additionally, the scattering of protons on the shielding material, that affects specific areas of the tissue, is detected by the SSNTD. (author)

  10. UV effects on the primary productivity of picophytoplankton: biological weighting functions and exposure response curves of Synechococcus

    Science.gov (United States)

    Neale, P. J.; Pritchard, A. L.; Ihnacik, R.

    2013-12-01

    A model that predicts UV effects on marine primary productivity using a biological weighting function (BWF) coupled to the photosynthesis-irradiance response (BWF/P-E model) has been implemented for two strains of the picoplanktonic cyanobacteria, Synechococcus, WH7803 and WH8102, which were grown at two irradiances (77 and 174 μmol m-2 s-1 PAR) and two temperatures (20 °C and 26 °C). The model was fit using photosynthesis measured in a polychromatic incubator with 12 long-pass filter configurations with 50% wavelength cutoffs ranging from 291 to 408 nm, giving an effective wavelength range of 280-400 nm. Examination of photosynthetic response vs weighted exposure revealed that repair rate progressively increases at low exposure but reaches a maximum rate above a threshold exposure ("Emax"). Adding Emax as a parameter to the BWF/P-E model provided a significantly better fit to Synechococcus data than the existing "E" or "T" models. Sensitivity to UV inhibition varied with growth conditions for both strains, but this was mediated mainly by variations in Emax for WH8102 while both the BWF and Emax changed for WH7803. Higher growth temperature was associated with a considerable reduction in sensitivity, consistent with an important role of repair in regulating sensitivity to UV. Based on nominal water column conditions (noon, solstice, 23° latitude, "blue" water), the BWFEmax/P-E model estimates that UV + PAR exposure inhibits Synechococcus photosynthesis from 77-91% at 1 m, and integrated productivity to 150 m 15-27% relative to predicted rates in the absence of inhibition.

  11. UV effects on the primary productivity of picophytoplankton: biological weighting functions and exposure response curves of Synechococcus

    Science.gov (United States)

    Neale, P. J.; Pritchard, A. L.; Ihnacik, R.

    2014-05-01

    A model that predicts UV effects on marine primary productivity using a biological weighting function (BWF) coupled to the photosynthesis-irradiance response (BWF/P-E model) has been implemented for two strains of the picoplanktonic cyanobacteria Synechococcus, WH7803 and WH8102, which were grown at two irradiances (77 and 174 μmol m-2 s-1 photosynthetically available radiation (PAR)) and two temperatures (20 and 26 °C). The model was fit using photosynthesis measured in a polychromatic incubator with 12 long-pass filter configurations with 50% wavelength cutoffs ranging from 291 to 408 nm, giving an effective wavelength range of 280-400 nm. Examination of photosynthetic response vs. weighted exposure revealed that repair rate progressively increases at low exposure but reaches a maximum rate above a threshold exposure ("Emax"). Adding Emax as a parameter to the BWF/P-E model provided a significantly better fit to Synechococcus data than the existing "E" or "T" models. Sensitivity to UV inhibition varied with growth conditions for both strains, but this was mediated mainly by variations in Emax for WH8102 while both the BWF and Emax changed for WH7803. Higher growth temperature was associated with a considerable reduction in sensitivity, consistent with an important role of repair in regulating sensitivity to UV. Based on nominal water column conditions (noon, solstice, 23° latitude, "blue" water), the BWFEmax/P-E model estimates that UV + PAR exposure inhibits Synechococcus photosynthesis from 78 to 91% at 1 m, and integrated productivity to 150 m 17-29% relative to predicted rates in the absence of inhibition.

  12. Three-dimensional reconstruction of the size and shape of protein microcrystals using Bragg coherent diffractive imaging

    Science.gov (United States)

    Coughlan, H. D.; Darmanin, C.; Kirkwood, H. J.; Phillips, N. W.; Hoxley, D.; Clark, J. N.; Harder, R. J.; Maxey, E.; Abbey, B.

    2016-05-01

    Three-dimensional imaging of protein crystals during x-ray diffraction experiments opens up a range of possibilities for optimizing crystal quality and gaining new insights into the fundamental processes that drive radiation damage. Obtaining this information at the appropriate length-scales however is extremely challenging. One approach that has been recently demonstrated as a promising avenue for characterizing the size and shape of protein crystals at nanometre length-scales is Bragg coherent diffractive imaging (BCDI). BCDI is a recently developed technique that is able to recover the phase of the continuous diffraction intensity signal around individual Bragg peaks. When data is collected at multiple points on a rocking curve, a reciprocal space map (RSM) can be assembled and then inverted using BCDI to obtain a three-dimensional image of the crystal. The first demonstration of two-dimensional biological BCDI was reported by Boutet et al on holoferritin, recently this work was extended to the study of radiation damage in micron-sized protein crystals. Here we present the first three-dimensional reconstructions of a Lysozyme protein crystal using BDI. The results are validated against RSM and transmission electron microscopy data and have implications for both radiation damage studies and for developing new approaches for structure retrieval from micron-sized protein crystals.

  13. Fiber Bragg Grating Based Thermometry

    OpenAIRE

    Ahmed, Zeeshan; Filla, James; Guthrie, William; Quintavalle, John

    2016-01-01

    In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over the temperature range of 233 K to 393 K. We demonstrate, in a hermetically sealed dry Argon environment, that FBG devices show a quadratic dependence on temperature with expanded uncertainties (k = 2) of ~500 mK. Our measurements indicate that the combined m...

  14. BESSY Bragg-Fresnel multilayer beam monitors

    International Nuclear Information System (INIS)

    X-ray optical systems based on Bragg-Fresnel multilayer components imaging an electron beam in a storage ring with microm resolution are presented. Design concepts are compared to alternative methods, and the aberrations and limits of Bragg-Fresnel multilayer optics are discussed. Experimental results of imaging the BESSY 1 source with sub 10 microm resolution are presented and the development of a compact Bragg-Fresnel multilayer telescope as a BESSY 2 standard beam monitor is described

  15. Writing Bragg Gratings in Multicore Fibers.

    Science.gov (United States)

    Lindley, Emma Y; Min, Seong-Sik; Leon-Saval, Sergio G; Cvetojevic, Nick; Lawrence, Jon; Ellis, Simon C; Bland-Hawthorn, Joss

    2016-01-01

    Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong suppression at a single wavelength requires that all cores have matching transmission profiles. These gratings cannot be inscribed using the same method as for single-core fibers because the curved surface of the cladding acts as a lens, focusing the incoming UV laser beam and causing variations in exposure between cores. Therefore we use an additional optical element to ensure that the beam shape does not change while passing through the cross-section of the multicore fiber. This consists of a glass capillary tube which has been polished flat on one side, which is then placed over the section of the fiber to be inscribed. The laser beam enters the fiber through the flat surface of the capillary tube and hence maintains its original dimensions. This paper demonstrates the improvements in core-to-core uniformity for a 7-core fiber using this method. The technique can be generalized to larger multicore fibers. PMID:27167576

  16. Fiber Bragg Grating Based Thermometry

    CERN Document Server

    Ahmed, Zeeshan; Guthrie, William; Quintavalle, John

    2016-01-01

    In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over the temperature range of 233 K to 393 K. We demonstrate, in a hermetically sealed dry Argon environment, that FBG devices show a quadratic dependence on temperature with expanded uncertainties (k = 2) of ~500 mK. Our measurements indicate that the combined measurement uncertainty is dominated by uncertainty in determining the peak center fitting and by thermal aging of polyimide coated fibers.

  17. High order Bragg grating microfluidic dye laser

    DEFF Research Database (Denmark)

    Balslev, Søren; Kristensen, Anders

    2004-01-01

    We demonstrate a single mode distributed feedback liquid dye laser, based on a short 133 'rd order Bragg grating defined in a single polymer layer between two glass substrates.......We demonstrate a single mode distributed feedback liquid dye laser, based on a short 133 'rd order Bragg grating defined in a single polymer layer between two glass substrates....

  18. Bevatron/Bevalac user's handbook: biology and medicine. Revision

    International Nuclear Information System (INIS)

    The Bevalac Biomedical Facility develops a source of near-relativistic heavy ions for applications to radiation biology, radiation therapy and diagnostic radiology. Pulsed beams of high LET heavy ions with variable pulse width, frequency, intensity and energy are produced and delivered to the Biomedical Facility by the Bevatron/Bevalac accelerator complex. Dosimetry equipment under computer control provides accurate determinations of absorbed doses in all regions of the Bragg curve. Depth-dose modifying devices and precise specimen positioning equipment are available. Animal housing and tissue culture facilities are convenient to the experimenter. This handbook is designed to provide the user with the relevant information for planning, proposing and executing an experiment

  19. Perspective Biological Markers for Autism Spectrum Disorders: Advantages of the Use of Receiver Operating Characteristic Curves in Evaluating Marker Sensitivity and Specificity

    Directory of Open Access Journals (Sweden)

    Provvidenza M. Abruzzo

    2015-01-01

    Full Text Available Autism Spectrum Disorders (ASD are a heterogeneous group of neurodevelopmental disorders. Recognized causes of ASD include genetic factors, metabolic diseases, toxic and environmental factors, and a combination of these. Available tests fail to recognize genetic abnormalities in about 70% of ASD children, where diagnosis is solely based on behavioral signs and symptoms, which are difficult to evaluate in very young children. Although it is advisable that specific psychotherapeutic and pedagogic interventions are initiated as early as possible, early diagnosis is hampered by the lack of nongenetic specific biological markers. In the past ten years, the scientific literature has reported dozens of neurophysiological and biochemical alterations in ASD children; however no real biomarker has emerged. Such literature is here reviewed in the light of Receiver Operating Characteristic (ROC analysis, a very valuable statistical tool, which evaluates the sensitivity and the specificity of biomarkers to be used in diagnostic decision making. We also apply ROC analysis to some of our previously published data and discuss the increased diagnostic value of combining more variables in one ROC curve analysis. We also discuss the use of biomarkers as a tool for advancing our understanding of nonsyndromic ASD.

  20. Self-consistent electrodynamic scattering in the symmetric Bragg case

    International Nuclear Information System (INIS)

    We have analyzed the symmetric Bragg case, introducing a model of self consistent scattering for two elliptically polarized beams. The crystal is taken as a set of mathematical planes, each of them defined by a surface density of dipoles. We have considered the mesofield and the epifield differently from that of the Ewald's theory and, we assumed a plane of dipoles and the associated fields as a self consistent scattering unit. The exact analytical treatment when applied to any two neighbouring planes, results in a general and self consistent Bragg's equation, in terms of the amplitude and phase variations. The generalized solution for the set of N planes was obtained after introducing an absorption factor in the incident radiation, in two ways: (i) the analytical one, through a rule of field similarity, which says that the incidence occurs in both faces of the all crystal planes and also, through a matricial development with the Chebyshev polynomials; (ii) using the numerical solution we calculated, iteratively, the reflectivity, the reflection phase, the transmissivity, the transmission phase and the energy. The results are showed through reflection and transmission curves, which are characteristics as from kinematical as dynamical theories. The conservation of the energy results from the Ewald's self consistency principle is used. In the absorption case, the results show that it is not the only cause for the asymmetric form in the reflection curves. The model contains basic elements for a unified, microscope, self consistent, vectorial and exact formulation for interpretating the X ray diffraction in perfect crystals. (author)

  1. All-Silica Hollow-Core Microstructured Bragg Fibers for Biosensor Application

    DEFF Research Database (Denmark)

    Passaro, Davide; Foroni, Matteo; Poli, Federica;

    2008-01-01

    The possibility to exploit all-silica hollow-core-microstructured Bragg fibers to realize a biosensor useful to detect the DNA hybridization process has been investigated. A Bragg fiber recently fabricated has been considered for the analysis performed by means of a full-vector modal solver based...... on the finite-element method. Since the DNA molecules necessary for the biosensor realization are in aqueous solution, it has been taken into account a microstructured fiber with water-filled holes. The dispersion curve and the confinement loss spectrum have been calculated in order to understand how...... a biofilm layer on the inner surface of the fiber holes can modify the fundamental mode properties. The numerical analysis results have successfully demonstrated the DNA bio-sensor feasibility in hollow-core Bragg fibers....

  2. Field analysis of TE and TM modes in photonic crystal Bragg fibers by transmission matrix method

    Directory of Open Access Journals (Sweden)

    M Hosseini Farzad

    2010-03-01

    Full Text Available In this article, we considered the field analysis in photonic crystal Bragg fibers. We apply the method of transmission matrix to calculater the dispersion curves, the longitudinal wave number over wave number versus incident wavelength, and the field distributions of TE and TM modes in the Bragg fiber. Our analysis shows that the field of guided modes is confined in the core and can exist only in particular wavelength bands corresponding to the band-gap of the periodic structure of the clad. From another point of view, light confinement is due to Bragg reflection from high-and low-refractive index layers of the clad. Also, the diagram of average angular frequency with respect to average longitudinal wave number is plotted so that the band gap regions of the clad are clearly observed.

  3. Biological effects in lymphocytes irradiated with {sup 99m}Tc: determination of the curve dose-response; Efeitos biologicos em linfocitos irradiados com {sup 99m}Tc: determinacao da curva dose-resposta

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Romero Marcilio Barros Matias de

    2002-08-01

    Biological dosimetry estimates the absorbed dose taking into account changes in biological parameters. The most used biological indicator of an exposition to ionizing radiation is the quantification of chromosomal aberrations of lymphocytes from irradiated individuals. The curves of dose versus induced biological effects, obtained through bionalyses, are used in used in retrospective evaluations of the dose, mainly in the case of accidents. In this research, a simple model for electrons and photons transports was idealized to simulate the irradiation of lymphocytes with {sup 99m} Tc, representing a system used for irradiation of blood cells. The objective of the work was to establish a curve of dose versus frequencies of chromosomal aberrations in lymphocytes of human blood. For the irradiation of blood samples micro spheres of human serum of albumin (HSAM) market with {sup 99m} Tc were used, allowing the irradiation of blood with different administered activities of {sup 99m} Tc, making possible the study the cytogenetical effects as a function of such activities. The conditions of irradiation in vivo using HSAM spheres marked with {sup 99m} Tc were simulated with MCNP 4C (Monte Carlo N-Particle) code to obtain the dose-response curve. Soft tissue composition was employed to simulate blood tissue and the analyses of the curve of dose versus biological effect showed a linear quadratic response of the unstable chromosomal aberrations. As a result, the response of dose versus chromosomal aberrations of blood irradiation with {sup 99m} Tc was best fitted by the curve Y=(8,99 {+-}2,06) x 1-{sup -4} + (1,24 {+-}0,62) x 10{sup -2} D + (5,67 {+-} 0,64) x 10{sup -2} D{sup 2}. (author)

  4. Reflectivity and Braggs Wavelength in FBG

    Directory of Open Access Journals (Sweden)

    Dinesh Arora

    2011-12-01

    Full Text Available We have presented an analytical model of splitters based on Fiber Bragg grating used to detect a Bragg wavelength from the number of wavelengths which are traveling in an optical fiber. The number of grids and grating length can be used as a wavelength shifter.This paper presents experimental results that are used to show the effect of number of grids and the length of the grating on the Bragg wavelength and reflectivity of Fiber Bragg Grating (FBG. The pitch of grating is directly proportional to the grating length and inversely proportional to number of grids. When the grating length is fixed and the number of grids is increased, the Bragg wavelength decreases and reflectivity increases. This increase in reflectivity is very small. Further when the number of grids was kept constant and the grating length was increased the Bragg wavelength increases. The effect of this increase in grating length on reflectivity is a very small. In our model, the effectiveness of the grating in extracting the Braggs wavelength is nearly 100%.

  5. BESSY Bragg-Fresnel multilayer beam monitors

    International Nuclear Information System (INIS)

    X-ray optical systems based on Bragg-Fresnel multilayer components imaging an electron beam in a storage ring with μm resolution are presented. Design concepts are compared to alternative methods, and the aberrations and limits of Bragg-Fresnel multilayer optics are discussed. Experimental results of imaging the BESSY I source with sub-10-μm resolution are presented, and the development of a compact Bragg-Fresnel multilayer telescope as a BESSY II standard beam monitor is described. copyright 1996 American Institute of Physics

  6. Strain imaging by Bragg edge neutron transmission

    CERN Document Server

    Santisteban, J R; Fitzpatrick, M E; Steuwer, A; Withers, P J; Daymond, M R; Johnson, M W; Rhodes, N; Schooneveld, E M

    2002-01-01

    The Bragg edges appearing in the transmitted time-of-flight spectra of polycrystalline materials have been recorded using a two-dimensional array of detectors. Subsequent analysis has enabled maps of the elastic strain to be produced.

  7. Mode characteristics of hollow core Bragg fiber

    Institute of Scientific and Technical Information of China (English)

    Minning Ji; Zhidong Shi; Qiang Guo

    2005-01-01

    Analytical expression to calculate propagation constant and mode field of the hollow core Bragg fiber is derived. Numerical results are presented. It is shown that the fundamental mode of the hollow core Bragg fiber is circularly symmetric TE01 mode with no polarization degeneracy, while the higher order mode may be HE11, TM01, or TE02 etc.. This property is different from conventional optical fiber that its fundamental mode is the linearly polarized HE11 mode and is polarization degeneracy.

  8. Principles of Bragg-Fresnel multilayer optics

    OpenAIRE

    Aristov, V. V.; Erko, A.I.; Martynov, V.V.

    1988-01-01

    The paper describes the principles and theoretical models of new X-ray optical elements based on the behaviour of Bragg-Fresnel diffraction. The use of volume diffraction permits one to achieve better spatial resolution compared with conventional plane optics and bending mirrors. The construction of Bragg-Fresnel elements combines the advantages of high-resolution Fresnel optics with stability of multilayer mirrors.

  9. Bragg diffraction of fermions at optical potentials

    International Nuclear Information System (INIS)

    This thesis describes the Bragg diffraction of ultracold fermions at an optical potential. A moving optical lattice was created, by overlaying two slightly detuned lasers. Atoms can be diffracted at this lattice if the detuning fulfills the Bragg condition for resting atoms. This Bragg diffraction is analyzed systematically in this thesis. To this end Rabi oscillations between the diffraction states were driven, as well in the weakly interacting Bragg regime, as in the strongly interacting Kapitza-Dirac regime. Simulations, based on a driven two-, respectively multilevel-system describe the observed effects rather well. Furthermore, the temporal evolution of the diffracted states in the magnetic trapping potential was studied. The anharmonicity of the trap in use and the scattering cross section for p-wave collisions in a 6Li system was determined from the movement of these states. Moreover the momentum distribution of the fermions was measured with Bragg spectroscopy and first signs of Fermi degeneracy were found. Finally an interferometer with fermions was build, exhibiting a coherence time of more than 100 μs. With this, the possibility for measurement and manipulation of ultracold fermions with Bragg diffraction could bee shown. (orig.)

  10. Reflectivity and Braggs Wavelength in FBG

    Directory of Open Access Journals (Sweden)

    Dinesh Arora, Dr.Jai Prakash, Hardeep Singh & Dr.Amit Wason

    2011-12-01

    Full Text Available We have presented an analytical model of splitters based on Fiber Bragg Grating used to detect a Braggwavelength from the number of wavelengths which are traveling in an optical fiber. The number of gridsand grating length can be used as a wavelength shifter. This paper presents experimental results that areused to show the effect of number of grids, the length of the grating on the Bragg wavelength andreflectivity of Fiber Bragg Grating (FBG. The pitch of grating is directly proportional to the grating lengthand inversely proportional to number of grids. When the grating length is fixed and the number of grids isincreased, the Bragg wavelength decreases resulting in increased reflectivity. This increased reflectivity isvery small. Further when the number of grids is kept constant and the grating length is increased theBragg wavelength increases. The effect of this increase in grating length on reflectivity is a very small. Inour model, the effectiveness of the grating in extracting the Braggs wavelength is nearly 100%.

  11. Reflectometry on curved interfaces

    International Nuclear Information System (INIS)

    Reflectometry is known since long as an interferometric method which can be used to characterize surfaces and thin films regarding their structure and, to a certain degree, composition as well. Properties like layer structures, layer thickness, density, and interface roughness can be determined by fitting the obtained reflectivity data with an appropriate model using a recursive fitting routine. However, one major drawback of the reflectometric method is its restriction to planar surfaces. In this article we demonstrate an approach to apply X-ray and neutron reflectometry to curved surfaces by means of the example of bent bare and coated glass slides. We prove the possibility to observe all features like Fresnel decay, Kiessig fringes, Bragg peaks and off-specular scattering and are able to interpret the data using common fitting software and to derive quantitative results about roughness, layer thickness and internal structure. The proposed method has become practical due to the availability of high quality 2D-detectors. It opens up the option to explore many kinds and shapes of samples, which, due to their geometry, have not been in the focus of reflectometry techniques until now

  12. Reflectometry on curved interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Früh, Johannes, E-mail: johannes.frueh@hit.edu.cn [Harbin Institute of Technology, Key Laboratory of Microsystems and Microstructures Manufacturing, Ministry of Education, Micro/Nano Technology Research Centre, Yikuang Street 2, Harbin 150080 (China); Rühm, Adrian [Max-Planck Institute for Intelligent Systems (formerly Max-Planck Institute for Metals Research), ZWE FRM II, Heisenbergstr. 3, 70569 Stuttgart (Germany); Möhwald, Helmuth [Max-Planck Institute of Colloids and Interfaces, Department of Interfaces, Am Mühlenberg 1, 14424 Golm/Potsdam (Germany); Krastev, Rumen [Natural and Medical Sciences Institute at the University of Tuebingen, Marktwiesenstr. 55, 72770 Reutlingen (Germany); Köhler, Ralf, E-mail: ralf.koehler@helmholtz-berlin.de [University of Technology Berlin, Stranski-Laboratorium, Straße des 17. Juni 124, 10623 Berlin (Germany); Helmholtz-Centre Berlin for Materials and Energy, Institute for Soft Matter and Functional Materials, Hahn-Meitner Platz 1, 14109 Berlin (Germany)

    2015-01-15

    Reflectometry is known since long as an interferometric method which can be used to characterize surfaces and thin films regarding their structure and, to a certain degree, composition as well. Properties like layer structures, layer thickness, density, and interface roughness can be determined by fitting the obtained reflectivity data with an appropriate model using a recursive fitting routine. However, one major drawback of the reflectometric method is its restriction to planar surfaces. In this article we demonstrate an approach to apply X-ray and neutron reflectometry to curved surfaces by means of the example of bent bare and coated glass slides. We prove the possibility to observe all features like Fresnel decay, Kiessig fringes, Bragg peaks and off-specular scattering and are able to interpret the data using common fitting software and to derive quantitative results about roughness, layer thickness and internal structure. The proposed method has become practical due to the availability of high quality 2D-detectors. It opens up the option to explore many kinds and shapes of samples, which, due to their geometry, have not been in the focus of reflectometry techniques until now.

  13. Guiding Properties of Silica/Air Hollow-Core Bragg Fibers

    DEFF Research Database (Denmark)

    Foroni, Matteo; Passaro, Davide; Poli, Federica;

    2008-01-01

    The guiding properties of realistic silica/air hollow-core Bragg fibers have been investigated by calculating the dispersion curves, the confinement loss spectrum and the field distribution of the guided modes through a full-vector modal solver based on the finite element method. In particular, the...... dispersion curves, associated to the transition of the fundamental mode into a surface one. It has been shown that surface modes are responsible of the sharp loss peaks, also experimentally measured, which pollute the loss spectrum of the fundamental mode and of the higher-order ones. Then, the influence on...... the guiding properties of each geometric characteristic in the hollow-core Bragg fiber cross-section has been deeply investigated, thus showing which parameter it is better to change in order to properly modify the loss values or its spectral behaviour. Moreover, in order to improve the loss...

  14. Biologic

    CERN Document Server

    Kauffman, L H

    2002-01-01

    In this paper we explore the boundary between biology and the study of formal systems (logic). In the end, we arrive at a summary formalism, a chapter in "boundary mathematics" where there are not only containers but also extainers ><, entities open to interaction and distinguishing the space that they are not. The boundary algebra of containers and extainers is to biologic what boolean algebra is to classical logic. We show how this formalism encompasses significant parts of the logic of DNA replication, the Dirac formalism for quantum mechanics, formalisms for protein folding and the basic structure of the Temperley Lieb algebra at the foundations of topological invariants of knots and links.

  15. Modulational instability in a fibre and a fibre Bragg grating

    International Nuclear Information System (INIS)

    In this review article, we study the influence of cross-phase modulation, higher order nonlinear effects such as self-steepening, self-induced Raman scattering and higher order dispersion effects such as third and fourth order dispersion on cross-phase modulational instability for a highly elliptical birefringent optical fibre, and obtain the conditions for the occurrence of cross-phase modulational instability in the normal dispersion regime. In addition, we also consider the pulse propagation through a fibre Bragg grating structure where we investigate the occurrence of modulational instability at the two edges of the photonic bandgap as well as on the upper and lower branches of the dispersion curves. (review article)

  16. Fiber Bragg Grating Filter High Temperature Sensors

    Science.gov (United States)

    Lyons, Donald R.; Brass, Eric D.; Pencil, Eric (Technical Monitor)

    2001-01-01

    We present a scaled-down method for determining high temperatures using fiber-based Bragg gratings. Bragg gratings are distributed along the length of the optical fiber, and have high reflectivities whenever the optical wavelength is twice the grating spacing. These spatially distinct Bragg regions (located in the core of a fiber) are sensitive to local temperature changes. Since these fibers are silica-based they are easily affected by localized changes in temperature, which results in changes to both the grating spacing and the wavelength reflectivity. We exploit the shift in wavelength reflectivity to measure the change in the local temperature. Note that the Bragg region (sensing area) is some distance away from where the temperature is being measured. This is done so that we can measure temperatures that are much higher than the damage threshold of the fiber. We do this by affixing the fiber with the Bragg sensor to a material with a well-known coefficient of thermal expansion, and model the heat gradient from the region of interest to the actual sensor. The research described in this paper will culminate in a working device as well as be the second portion of a publication pending submission to Optics Letters.

  17. Bevatron/Bevalac user's handbook: biology and medicine. Revision

    Energy Technology Data Exchange (ETDEWEB)

    1985-04-01

    The Bevalac Biomedical Facility develops a source of near-relativistic heavy ions for applications to radiation biology, radiation therapy and diagnostic radiology. Pulsed beams of high LET heavy ions with variable pulse width, frequency, intensity and energy are produced and delivered to the Biomedical Facility by the Bevatron/Bevalac accelerator complex. Dosimetry equipment under computer control provides accurate determinations of absorbed doses in all regions of the Bragg curve. Depth-dose modifying devices and precise specimen positioning equipment are available. Animal housing and tissue culture facilities are convenient to the experimenter. This handbook is designed to provide the user with the relevant information for planning, proposing and executing an experiment.

  18. POLICRYPS-based electrically switchable Bragg reflector.

    Science.gov (United States)

    De Sio, Luciano; Tabiryan, Nelson; Bunning, Timothy J

    2015-12-14

    The formation and characterization of a switchable volume reflective element fabricated from a polymer liquid crystal (LC) polymer slice (POLICRYPS) structure by holographic photopolymerization at high temperature (65 °C) using a photosensitive/nematic liquid crystal prepolymer mixture is reported. The submicron Bragg structure formed consists of periodic continuous polymeric walls separated by periodic LC channels. The phase separated NLC self-aligns in a homeotropic alignment between the polymer walls as indicated by polarizing optical microscopy analysis (Maltese cross). The resulting periodic grating structure results in a Bragg reflection notch upon illumination with white light due to the periodic variation in refractive index. Electro-optical experiments realized through in-plane electrodes and temperature experiments confirm that the multilayer structure acts as a Bragg mirror whose reflection efficiency can be controlled by either a small (~3V/µm) electric field or temperature. PMID:26699059

  19. Dosimetric response of radiochromic films to protons of low energies in the Bragg peak region

    Science.gov (United States)

    Battaglia, M. C.; Schardt, D.; Espino, J. M.; Gallardo, M. I.; Cortés-Giraldo, M. A.; Quesada, J. M.; Lallena, A. M.; Miras, H.; Guirado, D.

    2016-06-01

    One of the major advantages of proton or ion beams, applied in cancer treatment, is their excellent depth-dose profile exhibiting a low dose in the entrance channel and a distinct dose maximum (Bragg peak) near the end of range in tissue. In the region of the Bragg peak, where the protons or ions are almost stopped, experimental studies with low-energy particle beams and thin biological samples may contribute valuable information on the biological effectiveness in the stopping region. Such experiments, however, require beam optimization and special dosimetry techniques for determining the absolute dose and dose homogeneity for very thin biological samples. At the National Centre of Accelerators in Seville, one of the beam lines at the 3 MV Tandem Accelerator was equipped with a scattering device, a special parallel-plate ionization chamber with very thin electrode foils and target holders for cell cultures. In this work, we present the calibration in absolute dose of EBT3 films [Gafchromic radiotherapy films, http://www.ashland.com/products/gafchromic-radiotherapy-films] for proton energies in the region of the Bragg peak, where the linear energy transfer increases and becomes more significant for radiobiology studies, as well as the response of the EBT3 films for different proton energy values. To irradiate the films in the Bragg peak region, the energy of the beam was degraded passively, by interposing Mylar foils of variable thickness to place the Bragg peak inside the active layer of the film. The results obtained for the beam degraded in Mylar foils are compared with the dose calculated by means of the measurement of the beam fluence with an ionization chamber and the energy loss predicted by srim2008 code.

  20. BRAGG-FRESNEL OPTICS AND SUPERMIRRORS

    OpenAIRE

    A. Erko; Vidal, B.

    1996-01-01

    The main principles and some applications of Bragg-Fresnel multilayer optics and X-ray supermirrors are described. An elliptical Bragg-Fresnel multilayer lens (BFML), designed and fabricated in the IMT RAS has been used for 2-dimensional focusing of the white X-ray synchrotron beam. For the beam energy of about 12 KeV the spot size checked with the knife edge method was about 1 mm. Applications of BFML and supermirrors in x-ray imaging are discussed.

  1. Sangac interferometer on the holographic bragg grating

    CERN Document Server

    Tikhonov, E A

    2015-01-01

    The ring interferometer with zero optical path difference known as Sagnac one is offered with a diffraction splitting of the entering light beam. As the beamsplitter, a transmission holographic Bragg grating is used. Conditions of normal operation of this interferometer achieve under the equal intensity of beam copies and the adjustable phase shift between them in its two interferometer shoulders. These conditions are met with the holographic grating, which provides the phase shift 180^0 on the central Bragg wavelength. Experimental approbation of the modified interferometer validates the expected results.

  2. Analysis of the dependence of the guided mode field distribution on the silica bridges in hollow-core Bragg fibers

    DEFF Research Database (Denmark)

    Selleri, S.; Poli, F.; Foroni, M.;

    2007-01-01

    The guiding properties of fabricated air-silica Bragg fibers with different geometric characteristics have been numerically investigated through a modal solver based on the finite element method. The method has been used to compute the dispersion curves, the loss spectra and the field distribution...... of the modes sustained by the Bragg fibers under investigation. In particular, the silica bridge influence on the fundamental mode has been analyzed, by considering structures with different cross sections, that is an ideal Bragg fiber, without the silica nonosupports, a squared air-hole one and...... responsible of the loss peaks in the fiber transmission spectra, also experimentally measured. Surface modes are mainly localized in the regions of the cladding where the bridge supports join the cladding rings, forming silica islands where the field can focuses....

  3. Femtosecond laser pulse written Volume Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Richter Daniel

    2013-11-01

    Full Text Available Femtosecond laser pulses can be applied for structuring a wide range of ransparent materials. Here we want to show how to use this ability to realize Volume-Bragg-Gratings in various- mainly non-photosensitive - glasses. We will further present the characteristics of the realized gratings and a few elected applications that have been realized.

  4. Modal analysis of Bragg onion resonators

    OpenAIRE

    Xu, Yong; Liang, Wei; Yariv, Amnon; Fleming, James G.; Lin, Shawn-Yu

    2004-01-01

    From analysis of the high Q modes in a Bragg onion resonator with an omnidirectional reflector cladding, we establish a close analogy between such a resonator and a spherical hollow cavity in perfect metal. We demonstrate that onion resonators are ideal for applications that require a large spontaneous-emission factor ß, such as thresholdless lasers and single-photon devices.

  5. Efficient iterative technique for designing bragg gratings

    DEFF Research Database (Denmark)

    Plougmann, Nikolai; Kristensen, Martin

    2004-01-01

    We present a new iterative method for designing Bragg gratings based on the Levenberg-Marquardt method of minimizing a chi-squared merit function. It is effective for designing both weak and strong gratings and is particularly well suited for unchirped gratings....

  6. Curved neutron guide

    International Nuclear Information System (INIS)

    The principle of the curved neutron guide is to transport neutrons far away from the reactor core with as minimum particle loss as possible. After a series of total reflection,the neutron beam is no longer visible from the reactor core and consequently, gamma radiations and fast neutrons emitted from the core are scattered by the walls of the guide and absorbed by the biological shielding set around the guide. The curved neutron guide provides a high-quality beam of slow neutrons. The first chapter deals with the theoretical concept of curved guide, we have determined the parameters for the setting of such a guide in the EL3 reactor at Saclay (France). The different tolerances on the state the surface, on the alignment of the different parts of the guide, on the waving of the guide wall have been assessed. The second chapter presents the technical solution chosen that complies to all the required specifications. The curved neutron guide has been designed for neutrons with wavelength of 4 Angstroms, it is 29 m long, has a bending radius of 835 m and is composed of 87 rectangular components made of glass plates on which a 1500 angstrom thick layer of nickel has been deposited. Each component is set with a fixed angle of (4±0.25)*10-4 radians from the previous component in order to form the bending radius. The last chapter is dedicated to the neutron flux measurement made at the end of the neutron guide

  7. Investigation on Thermal-Induced Decay of Fiber Bragg Grating

    Science.gov (United States)

    Zhang, Peng; Ding, Pinyi; Liu, Li

    2015-06-01

    A fiber Bragg grating (FBG), with advantages such as high anti-interference ability, a simple structure, and multiplexing, is widely used as a core component in numerous applications to monitor adverse environments of high temperature and air pressure. When FBGs are exposed to these extreme conditions, especially high temperature, performance decay may occur, bringing serious impact on the stability and reliability of the instruments. Therefore, it is necessary to make a detailed analysis on the mechanism of the thermal-induced decay of a FBG. One commonly used theory is proposed by Erdogn, which is based on a power function and aging curve method. However, these empirical equations are limited in application because only one single type of FBG can be analyzed this way. This paper focuses on the mechanism of a FBG, and presents a detailed analysis on the theory of the thermal-induced decay of a FBG using the electron dipole mode. Theoretical relationships between reflectivity and time or temperature were obtained, and a corresponding thermal-induced decay testing system was designed. The experimental and theoretical reflectivity decline under different temperatures of and are plotted, and the curves of reduction derived from the theoretical model fit the experimental data well. Thus, this model can be applied to predict the performance decay of FBGs at high temperature.

  8. Investigation of omnidirectional reflection band in ZnTe/ZnSe distributed Bragg reflector

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Ying-Shin [Department of Electrical Engineering, National Taiwan Ocean University, Keelung 20224, Taiwan (China); Hu, Sheng-Yao [Department of Digital Technology Design, Tungfang Design University, Kaohsiung 82941, Taiwan (China); Lee, Yueh-Chien, E-mail: jacklee@mail.tnu.edu.tw [Department of Electronic Engineering, Tungnan University, New Taipei City 22202, Taiwan (China); Chang, Chung-Cheng; Tiong, Kwong-Kau [Department of Electrical Engineering, National Taiwan Ocean University, Keelung 20224, Taiwan (China); Shen, Ji-Lin [Department of Physics, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Chou, Wu-Ching [Department of Electrophysics, National Chiao Tung University, Hsinchu 30010, Taiwan (China)

    2015-11-15

    We report the characteristics of reflectance spectra of the 15- and 20-period ZnTe/ZnSe distributed Bragg reflector grown on GaAs (001) substrates by molecular beam epitaxy. The reflectance spectra measured at various incident angles and polarizations were investigated by the theoretical curves simulated using transfer matrix method. The wavelength variation of the refractive indices described by Sellmeier equation and random thickness model were also considered for the interpretation of the experimentally observed curves. An omnidirectional reflection range defined from the edge of incident-angle-dependent reflection band with TE and TM polarizations is about 15 nm, and is consistent with the observed experimental curves. The results showed that the selected ZnTe and ZnSe materials are suitable for constructing multilayer structures having omnidirectional reflection band. - Highlights: • ZnTe/ZnSe distributed Bragg reflector grown by molecular beam epitaxy. • The reflectance spectra are measured at various incidence angles and polarizations. • The theoretical curves are considered by Sellmeier and random thickness models. • An observed omnidirectional reflection range in ZnTe/ZnSe DBR is about 15 nm.

  9. Ground effects on magnetooptic Bragg cells

    Institute of Scientific and Technical Information of China (English)

    WEN Feng; WU BaoJian; QIU Kun

    2008-01-01

    Propagation equation of magnetostatic waves in an arbitrarily magnetized yttrium-iron-garnet/gadolinium-gallium-garnet waveguide coated with perfect metal planes is obtained using the method of the surface magnetic permeability. And ground effects on magnetooptic Bragg cells are investigated with the magnetooptic coupled-mode theory. Theoretical analysis indicates that, diffraction efficiency of guided optical waves can be improved by adjusting the spacing of the metal plane from the ferrite film, and ground effects on the diffraction efficiency will be enhanced using an appropriately tilted bias magnetic field. In the metal clad waveguide system, the magnetostatic wave frequency at which the diffraction efficiency peak is obtained corresponds to the "zero-dispersion" point. Performance of RF spectrum analyzers in this system can also be improved by comparing with the case of the sandwich waveguide. Therefore, magnetooptic Bragg cells with the metal clad waveguide are potential applications to the microwave communication and optical signal processing.

  10. Ion implanted Bragg endash Fresnel lens

    International Nuclear Information System (INIS)

    We have investigated the feasibility of widening the bandpath of the Bragg endash Fresnel optical element through the use of ion implantation. The focusing properties of Bragg endash Fresnel lenses (BFLs) were studied as a function of the implantation dose and energy. An enhancement of the focus intensity of up to 15% was found, which is less than expected. Due to the complicated scattering of the low energy ions inside the micrometer- and submicrometer-sized crystal features that make up the BFL relief, the implantation technology destroys the peripheral zones of the BFL more than it increases the intensity in the focus. Nevertheless we believe that high energy implantation can be successfully used to modify the BFL reflectivity, especially in the case of nearly backscattering reflection. copyright 1996 American Institute of Physics

  11. Sampled phase-shift fiber Bragg gratings

    Institute of Scientific and Technical Information of China (English)

    Xu Wang(王旭); Chongxiu Yu(余重秀); Zhihui Yu(于志辉); Qiang Wu(吴强)

    2004-01-01

    A phase-shift fiber Bragg grating (FBG) with sampling is proposed to generate a multi-channel bandpass filter in the background of multi-channel stopbands. The sampled noire fiber gratings are analyzed by Fourier transform theory first, and then simulation and experiment are performed, the results show that transmission peaks are opened in every reflective channel, the spectrum shape of every channel is identical.It can be used to fabricate multi-wavelength distributed feedback (DFB) fiber laser.

  12. Improvement of soybean variety 'Bragg' through mutagenesis

    International Nuclear Information System (INIS)

    Full text: Variety 'Bragg' (Jackson x D49-2491) of soybean (Glycine max. (L.) Merrill) was found to be high yielding and widely adaptable throughout India. Its yield stability, however, is unsatisfactory, probably due to low germinability necessitating use of higher seed rate. With the main objective to rectify this defect, mutagenesis involving chemical as well as physical mutagens was used. Dry seeds were treated with EMS or MMS (0.2, 0.4 and 0.6%), or gamma rays (15, 20 and 25 kR) with and without additional exposure to UV (2 hrs at 260 nm) in 1982. In M2, a mutation frequency ranging from 2.24 to 22.85% was observed. Screening of M2 and of subsequent generations yielded a broad spectrum of mutations. Some of the mutants are agronomically useful. Among them, mutant 'T214' resulting from 25 kR gamma rays + UV, was found to possess better germinability (+15%), earliness (5 days) and high yield during both rainy and post-rainy seasons in 1986 and 1987, when compared with the parent variety 'Bragg'. The mutant has smaller seed-size (TGW 125 g) than the parent (145 g). In soybean, large-seeded varieties were reported to have poorer seed germinability. Thus, the better germinability of the mutant might be related to its reduced seed size. Seeds of the mutant show a light brown colour of the hilum in contrast to the black hilum of 'Bragg'. In other characters the mutant is similar to 'Bragg'. The mutant should have potential for commercial cultivation in India. For confirmation of its agronomically superior performance, it is undergoing national evaluation in multilocational trials under 'All India Co-ordinated Research Project on Soybean (ICAR)'. The strain has been named 'NRC-2'. (author)

  13. Fort Bragg Embraces Groundbreaking Heat Pump Technology

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-03-01

    The U.S. Army’s Fort Bragg partnered with the Department of Energy (DOE) to develop and implement solutions to build new, low-energy buildings that are at least 50% below Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) Program.

  14. Quaternionic Salkowski Curves and Similar Curves

    CERN Document Server

    Önder, Mehmet

    2012-01-01

    In this paper, we give the definitions and characterizations of spatial quaternionic Salkowski, anti-Salkowski and similar curves. We show that quaternionic Salkowski and anti-Salkowski curves are quaternionic slant helices. Moreover, we obtain that the families of quaternionic Salkowski and anti-Salkowski curves form the families of quaternionic similar curves.

  15. The Stephan Curve revisited.

    Science.gov (United States)

    Bowen, William H

    2013-01-01

    The Stephan Curve has played a dominant role in caries research over the past several decades. What is so remarkable about the Stephan Curve is the plethora of interactions it illustrates and yet acid production remains the dominant focus. Using sophisticated technology, it is possible to measure pH changes in plaque; however, these observations may carry a false sense of accuracy. Recent observations have shown that there may be multiple pH values within the plaque matrix, thus emphasizing the importance of the milieu within which acid is formed. Although acid production is indeed the immediate proximate cause of tooth dissolution, the influence of alkali production within plaque has received relative scant attention. Excessive reliance on Stephan Curve leads to describing foods as "safe" if they do not lower the pH below the so-called "critical pH" at which point it is postulated enamel dissolves. Acid production is just one of many biological processes that occur within plaque when exposed to sugar. Exploration of methods to enhance alkali production could produce rich research dividends. PMID:23224410

  16. Measurement of Stress-Strain Response of A Rammed Earth Prism In Compression Using Fiber Bragg Grating Sensors

    OpenAIRE

    Prasad, Guru AS; Anitha, M.; Rao, Nanjunda KS; S. Asokan

    2011-01-01

    A comparative study of strain response and mechanical properties of rammed earth prisms, has been made using Fiber Bragg Grating (FBG) sensors (optical) and clip-on extensometer (electro-mechanical). The aim of this study is to address the merits and demerits of traditional extensometer vis-à-vis FBG sensor; a uni-axial compression test has been performed on a rammed earth prism to validate its structural properties from the stress - strain curves obtained by two different methods of measurem...

  17. Cell inactivation and induction of DNA double strand breaks by heavy ions near the bragg peak

    International Nuclear Information System (INIS)

    CHO-K1 cells were irradiated with protons and C, N, and O ions near the Bragg peak at the Medium Energy Beam (MEXP) Course. C, N, O ions were transported to MEXP course at 6 MeV/n and led into air, and then irradiated to the cells. Ion energy (or the LETs) was selected by changing the distance between the beam exit and the sample position. For protons, the ion energy was decreased to 4.3 MeV from 6 MeV by controlling linac accelerators. For measurement of cell inactivation, 4.3 MeV protons were decreased its energy by air as an absorber to 3.4, 2.6, and 2.0 and cell inactivation cross-section (σ) was higher with low energy protons. For N ion, the σ values were obtained at two different positions of Bragg curves, which showed lower σ at higher LET. These may be due to drastic thin down of ion track radius at near the Bragg peak. (author)

  18. Resonant Bragg quantum wells in hybrid photonic crystals: optical properties and applications

    Science.gov (United States)

    Schiumarini, D.; D'Andrea, A.; Tomassini, N.

    2016-03-01

    The exciton-polariton propagation in resonant hybrid periodic stacks of isotropic/anisotropic layers, with misaligned in-plane anisotropy and Bragg photon frequency in resonance with Wannier exciton of 2D quantum wells is studied by self-consistent theory and in the effective mass approximation. The optical tailoring of this new class of resonant Bragg reflectors, where the structural periodicity of a multi-layer drives the in-plane optical \\hat{C}-axis orientation, is computed for symmetric and asymmetric elementary cells by conserving strong radiation-matter coupling and photonic band-gaps. The optical response computation, on a finite cluster of N-asymmetric elementary cells, shows anomalous exciton-polariton propagation and absorbance properties strongly dependent on the incident wave polarizations. Finally, the behaviour of the so-called intermediate dispersion curves, close to the unperturbed exciton resonance, and located between upper and lower branches of the first band gap, is studied as a function of the in-plane \\hat{C}-axis orientation. This latter optical property is promising for storing exciton-polariton impulses in this kind of Bragg reflector.

  19. A Bragg Magnifier with Sub-μm Resolution Using High Energy Synchrotron Light

    International Nuclear Information System (INIS)

    X-ray computer microtomography using synchrotron light (SRμCT) has proven to be a highly powerful method in many fields of modern research as medicine, biology and material science. Presently used instruments, however, are limited to about 1μm resolution at a total efficiency of a few percent, due to the properties of the scintillator, the optical light transfer, and the CCD granularity. To overcome these limitations we have realized a novel approach based on extremely asymmetrical Bragg reflection. Our instrument, the 'Bragg Magnifier' combines two asymmetrically cut Si crystals, mounted close to each other on two rotation and adjustment units. It is installed at the Materials Science Beamline of the Swiss Light Source (SLS). It operates at favorably high energies between 21 keV and 23 keV. In a first experiment using a human bone trabecula a two-dimensional magnification factor of 100x100 was achieved yielding a spatial resolution of 140nm

  20. Superradiant amplification of terahertz radiation by plasmons in inverted graphene with a planar distributed Bragg resonator

    Energy Technology Data Exchange (ETDEWEB)

    Polischuk, O. V., E-mail: polischuk.sfire@mail.ru; Popov, V. V., E-mail: popov-slava@yahoo.co.uk [Russian Academy of Sciences, Saratov Branch, Kotel’nikov Institute of Radioengineering and Electronics (Russian Federation); Otsuji, T. [Tohoku University, Research Institute for Electrical Communication (Japan)

    2015-11-15

    It is shown theoretically that stimulated generation of terahertz radiation by plasmons in graphene with a planar distributed Bragg resonator is possible at two different frequencies for each plasmon mode. This behavior may be attributed to the superradiance of the collective plasmon mode, which is associated with superlinear increase in the radiative damping of the plasmons with increase in pumping power. As a result, the curves of the radiative damping and the plasmon gain as a function of the pumping power intersect at two points corresponding to different generation conditions.

  1. Quotient curves of the GK curve

    OpenAIRE

    Fanali, Stefania; Giulietti, Massimo

    2009-01-01

    For every $q=l^3$ with $l$ a prime power greater than 2, the GK curve $X$ is an $F_{q^2}$-maximal curve that is not $F_{q^2}$-covered by any $F_{q^2}$-maximal Deligne-Lusztig curve. Interestingly, $X$ has a very large $F_{q^2}$-automorphism group with respect to its genus. In this paper we compute the genera of a large variety of curves that are Galois-covered by the GK curve, thus providing several new values in the spectrum of genera of $F_{q^2}$-maximal curves.

  2. Survival curves for irradiated cells

    International Nuclear Information System (INIS)

    The subject of the lecture is the probability of survival of biological cells which have been subjected to ionising radiation. The basic mathematical theories of cell survival as a function of radiation dose are developed. A brief comparison with observed survival curves is made. (author)

  3. Fiber Bragg Grating Sensors for Harsh Environments

    Directory of Open Access Journals (Sweden)

    Stephen J. Mihailov

    2012-02-01

    Full Text Available Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on regeneration techniques and femtosecond infrared laser processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This paper will present a review of some of the more recent developments.

  4. Spatially Resolved Analysis of Bragg Selectivity

    Directory of Open Access Journals (Sweden)

    Tina Sabel

    2015-11-01

    Full Text Available This paper targets an inherent control of optical shrinkage in photosensitive polymers, contributing by means of spatially resolved analysis of volume holographic phase gratings. Point by point scanning of the local material response to the Gaussian intensity distribution of the recording beams is accomplished. Derived information on the local grating period and grating slant is evaluated by mapping of optical shrinkage in the lateral plane as well as through the depth of the layer. The influence of recording intensity, exposure duration and the material viscosity on the Bragg selectivity is investigated.

  5. Status of the OCS Bragg-Spectrometer for SODART

    DEFF Research Database (Denmark)

    Wiebicke, H.J.; Halm, I.; Christensen, Finn Erland; Rasmussen, Inga; Rasmussen, H.E.

    OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented.......OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented....

  6. Status of the OCS Bragg-Spectrometer for SODART

    DEFF Research Database (Denmark)

    Wiebicke, H.J.; Halm, I.; Christensen, Finn Erland;

    1998-01-01

    OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented.......OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented....

  7. Optical fibre Bragg grating recorded in TOPAS cyclic olefin copolymer

    DEFF Research Database (Denmark)

    Johnson, I.P.; Yuan, Scott Wu; Stefani, Alessio; Nielsen, Kristian; Rasmussen, Henrik K.; Khan, L.; Webb, D.J.; Kalli, K.; Bang, Ole

    2011-01-01

    A report is presented on the inscription of a fibre Bragg grating into a microstructured polymer optical fibre fabricated from TOPAS cyclic olefin copolymer. This material offers two important advantages over poly (methyl methacrylate), which up to now has formed the basis for polymer fibre Bragg...

  8. Fano resonances in integrated silicon Bragg reflectors for sensing applications.

    Science.gov (United States)

    Chang, Chia-Ming; Solgaard, Olav

    2013-11-01

    We investigate theoretically and experimentally Fano resonances in integrated silicon Bragg reflectors. These asymmetric resonances are obtained by interference between light reflected from the Bragg waveguide and from the end facet. The Bragg reflectors were designed and modeled using the 1D transfer matrix method, and they were fabricated in standard silicon wafers using a CMOS-compatible process. The results show that the shape and asymmetry of the Fano resonances depend on the relative phase of the reflected light from the Bragg reflectors and end facet. This phase relationship can be controlled to optimize the lineshapes for sensing applications. Temperature sensing in these integrated Bragg reflectors are experimentally demonstrated with a temperature sensitivity of 77 pm/°C based on the thermo-optic effect of silicon. PMID:24216944

  9. Biological effectiveness of antiproton annihilation

    DEFF Research Database (Denmark)

    Holzscheiter, M.H.; Agazaryan, N.; Bassler, Niels;

    2004-01-01

    We describe an experiment designed to determine whether or not the densely ionizing particles emanating from the annihilation of antiprotons produce an increase in ‘‘biological dose’’ in the vicinity of the narrow Bragg peak for antiprotons compared to protons. This experiment is the first direct...

  10. Neutron in biology

    Energy Technology Data Exchange (ETDEWEB)

    Niimura, Nobuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-11-01

    Neutron in biology can provide an experimental method of directly locating relationship of proteins and DNA. However, there are relatively few experimental study of such objects since it takes a lot of time to collect a sufficient number of Bragg reflections and inelastic spectra due to the low flux of neutron illuminating the sample. Since a next generation neutron source of JAERI will be 5MW spallation neutron source and its effective neutron flux will be 10{sup 2} to 10{sup 3} times higher than the one of JRR-3M, neutron in biology will open a completely new world for structural biology. (author)

  11. Dose ratio proton radiography using the proximal side of the Bragg peak

    Energy Technology Data Exchange (ETDEWEB)

    Doolan, P. J., E-mail: paul.doolan.09@ucl.ac.uk; Royle, G.; Gibson, A. [Department of Medical Physics and Bioengineering, University College London, London WC1E 6BT (United Kingdom); Lu, H.-M. [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts 02114 (United States); Prieels, D.; Bentefour, E. H. [Ion Beam Applications (IBA), 3 Chemin du Cyclotron, Louvain la Neuve B-1348 (Belgium)

    2015-04-15

    Purpose: In recent years, there has been a movement toward single-detector proton radiography, due to its potential ease of implementation within the clinical environment. One such single-detector technique is the dose ratio method in which the dose maps from two pristine Bragg peaks are recorded beyond the patient. To date, this has only been investigated on the distal side of the lower energy Bragg peak, due to the sharp falloff. The authors investigate the limits and applicability of the dose ratio method on the proximal side of the lower energy Bragg peak, which has the potential to allow a much wider range of water-equivalent thicknesses (WET) to be imaged. Comparisons are made with the use of the distal side of the Bragg peak. Methods: Using the analytical approximation for the Bragg peak, the authors generated theoretical dose ratio curves for a range of energy pairs, and then determined how an uncertainty in the dose ratio would translate to a spread in the WET estimate. By defining this spread as the accuracy one could achieve in the WET estimate, the authors were able to generate lookup graphs of the range on the proximal side of the Bragg peak that one could reliably use. These were dependent on the energy pair, noise level in the dose ratio image and the required accuracy in the WET. Using these lookup graphs, the authors investigated the applicability of the technique for a range of patient treatment sites. The authors validated the theoretical approach with experimental measurements using a complementary metal oxide semiconductor active pixel sensor (CMOS APS), by imaging a small sapphire sphere in a high energy proton beam. Results: Provided the noise level in the dose ratio image was 1% or less, a larger spread of WETs could be imaged using the proximal side of the Bragg peak (max 5.31 cm) compared to the distal side (max 2.42 cm). In simulation, it was found that, for a pediatric brain, it is possible to use the technique to image a region with a

  12. Research of fiber Bragg grating geophone based on cantilever beam

    Science.gov (United States)

    Wang, Liang; Chen, Shao-hua; Tao, Guo; Lu, Gui-wu; Zhao, Kun

    2009-07-01

    Along with the development of seismic exploration, the demand of frequency, dynamic range, precision and resolution ration is increased. However, the traditional geophone has disadvantages of narrower bandwidth, lower dynamic range and resolution, and cannot meet the new needs of seismic exploration. Geophone technology is a choke point, which constrains the development of petroleum prospecting in recent years. Fiber Bragg Grating seism demodulation technology is the newest kind of seism demodulation technology. The sensing probe of the Fiber Bragg Grating geophone is made up of Fiber Bragg Gating. The information which it collects is embodied by wavelength. The modulation-demodulation is accomplished by Fiber Bragg Gating geophone directly. In this paper, we design different size Fiber Bragg Grating geophones based on the transmission properties of Fiber Bragg Grating and cantilever beam method. Beryllium bronze and stainless steel are chosen as the elastic beam and shell materials, respectively. The parameters such as response function and sensitivity are given theoretically. In addition, we have simulated the transmission characteristics of Fiber Bragg Grating geophone by virtue of finite element analysis. The influences of wavelength, mass block, fiber length on the characteristics of geophones are discussed in detail, and finally the appropriate structural parameters are presented.

  13. Frequency shift of the Bragg and Non-Bragg backscattering from periodic water wave.

    Science.gov (United States)

    Wen, Biyang; Li, Ke

    2016-01-01

    Doppler effect is used to measure the relative speed of a moving target with respect to the radar, and is also used to interpret the frequency shift of the backscattering from the ocean wave according to the water-wave phase velocity. The widely known relationship between the Doppler shift and the water-wave phase velocity was deduced from the scattering measurements data collected from actual sea surface, and has not been verified under man-made conditions. Here we show that this ob- served frequency shift of the scattering data from the Bragg and Non-Bragg water wave is not the Doppler shift corresponding to the water-wave phase velocity as commonly believed, but is the water-wave frequency and its integral multiple frequency. The power spectrum of the backscatter from the periodic water wave consists of serials discrete peaks, which is equally spaced by water wave frequency. Only when the water-wave length is the integer multiples of the Bragg wave, and the radar range resolution is infinite, does the frequency shift of the backscattering mathematically equal the Doppler shift according to the water-wave phase velocity. PMID:27531469

  14. A ballistic motion disrupted by Bragg reflections

    CERN Document Server

    Clark, Jeremy Thane

    2012-01-01

    I study a Lindblad dynamics modeling a quantum test particle in a Dirac comb that collides with particles from a background gas. The main result is a homogenization theorem in a semi-classical limiting regime involving large mass for the test particle and a rescaling for the strength and period of the Dirac comb. Over the time interval considered, the particle would exhibit essentially ballistic motion if either the singular periodic potential or the kicks from the gas were removed. However, the particle behaves diffusively when both sources of forcing are present. The conversion of the motion from ballistic to diffusive is generated by occasional Bragg reflections that result when the test particle's momentum is driven through a collision near an element of the half-spaced reciprocal lattice of the Dirac comb.

  15. Fiber Bragg gratings for microwave photonics subsystems.

    Science.gov (United States)

    Wang, Chao; Yao, Jianping

    2013-09-23

    Microwave photonics (MWP) is an emerging filed in which photonic technologies are employed to enable and enhance functionalities in microwave systems which are usually very challenging to fulfill directly in the microwave domain. Various photonic devices have been used to achieve the functions. A fiber Bragg grating (FBG) is one of the key components in microwave photonics systems due to its unique features such as flexible spectral characteristics, low loss, light weight, compact footprint, and inherent compatibility with other fiber-optic devices. In this paper, we discuss the recent development in employing FBGs for various microwave photonics subsystems, with an emphasis on subsystems for microwave photonic signal processing and microwave arbitrary waveform generation. The limitations and potential solutions are also discussed. PMID:24104174

  16. Solgel grating waveguides for distributed Bragg reflector lasers.

    Science.gov (United States)

    Fardad, M A; Luo, H; Beregovski, Y; Fallahi, M

    1999-04-01

    Solgel grating waveguides and their application to the fabrication of external-cavity distributed Bragg reflector (DBR) lasers are demonstrated. A new composition of aluminosilicate material is developed for the fabrication of single-mode waveguides and Bragg reflectors. An average loss of <0.2 dB/cm is measured in the single-mode waveguides at 1550 nm. The reflectors show filtering greater than 97% near 1530 nm, with a bandwidth of ~0.6 nm . The Bragg reflectors are used as feedback resonators for DBR lasers. Single-mode lasing with a sidemode suppression of better than 25 dB is demonstrated. PMID:18071539

  17. Modeling Component-based Bragg gratings Application: tunable lasers

    Directory of Open Access Journals (Sweden)

    Hedara Rachida

    2011-09-01

    Full Text Available The principal function of a grating Bragg is filtering, which can be used in optical fibers based component and active or passive semi conductors based component, as well as telecommunication systems. Their ideal use is with lasers with fiber, amplifiers with fiber or Laser diodes. In this work, we are going to show the principal results obtained during the analysis of various types of grating Bragg by the method of the coupled modes. We then present the operation of DBR are tunable. The use of Bragg gratings in a laser provides single-mode sources, agile wavelength. The use of sampled grating increases the tuning range.

  18. X-ray diffraction at Bragg angles around π/2

    International Nuclear Information System (INIS)

    X-ray diffraction at Bragg angles around π/2 is studied from the theoretical and experimental points of view. The proposed corrections to the dynamical theory in the θβ ≅ π/2 cases, has been reviewed showing the equivalence between two formalisms leading to a corrected expression for the dependence of the angular parameter y with the angle of incidence. An expression for y valid in the conventional and θ β ≅ π/2 cases has been obtained. A general expression for Bragg law and for energy resolution after a Bragg diffraction was also deduced. (author)

  19. Thermally tunable integrated planar Bragg-grating stabilized diode laser

    Science.gov (United States)

    Lynch, S. G.; Gates, J. C.; Berry, S. A.; Holmes, C.; Smith, P. G. R.

    2015-03-01

    A pair of external cavity diode lasers are fabricated using an integrated planar Bragg grating. The planar waveguide and Bragg reflector is UV-written within a glass-on-silicon chip. Intensity isolated, continuous wavelength tuning at > 1kHz modulation rate is acheived using micro-heating elements fabricated directly over the Bragg grating. Low RIN (<140dB) and low linewidth (δν ~ 200 kHz) operation is found using a heterodyne measurement. We demonstrate the lasers operating in phase-locked loop configuration where one laser is frequency-offset locked to the other.

  20. Resonantly enhanced Bragg-scattering spectroscopy of an atomic transition

    Science.gov (United States)

    Yang, Xudong; Qiao, Cuifang; Li, Chuanliang; Chen, Fenghua

    2016-07-01

    A novel resonantly enhanced Bragg-scattering (REBS) spectroscopy from a population difference grating (PDG) is reported. The PDG is formed by a standing-wave (SW) pump field, which periodically modulates the space population distributions of two levels in the 87Rb D1 line. Then, a probe beam, having identical frequency and orthogonal polarization with the SW pump field, is Bragg-scattered by the PDG. The research achievement shows that the Bragg-scattered light is strongest at an atomic transition, and forms an REBS spectrum with a high signal-to-noise ratio and sub-natural linewidth. The observed REBS can be applied in precise frequency measurements.

  1. Bayesian Generalized Rating Curves

    OpenAIRE

    Helgi Sigurðarson 1985

    2014-01-01

    A rating curve is a curve or a model that describes the relationship between water elevation, or stage, and discharge in an observation site in a river. The rating curve is fit from paired observations of stage and discharge. The rating curve then predicts discharge given observations of stage and this methodology is applied as stage is substantially easier to directly observe than discharge. In this thesis a statistical rating curve model is proposed working within the framework of Bayesian...

  2. Koblitz Curve Cryptosystem

    DEFF Research Database (Denmark)

    Lange, Tanja

    2005-01-01

    Hyperelliptic curves over finite fields are used in cryptosystems. To reach better performance, Koblitz curves, i.\\,e. subfield curves, have been proposed. We present fast scalar multiplication methods for Koblitz curve cryptosystems for hyperelliptic curves enhancing the techniques published so ......$-adic expansion as the key instead of starting with an integer which is then expanded. We show that this approach has similar security and is especially suited for restricted devices as the requirements to perform the operations are reduced to a minimum....

  3. From Phillips curve to wage curve

    OpenAIRE

    Graafland, J.J.

    1991-01-01

    In most traditional macro-economic models of the Netherlands the wage equation is specified by a Phillips curve, in which wage growth is negatively related to the unemployment rate. This paper shows, however, that wage formation can better be described by the so-called wage curve, in which the wage level instead of wage growth depends negatively on the unemployment rate.

  4. Variable Depth Bragg Peak Method for Single Event Effects Testing

    Science.gov (United States)

    Buchner, S.; Kanyogoro, N.; Foster, C.; O'Neill, P.

    2011-01-01

    Traditionally, accelerator SEE testing is accomplished by removing the tops of packages so that the IC chips are accessible to heavy ions. However, ICs in some advanced packages cannot be de-lidded so a different approach is used that involves grinding and/or chemically etching away part of the package and the chip from the back side. The parts are then tested from the back side with ions having sufficient range to reach the sensitive volume. More recently, the entire silicon substrate in an SOI/SRAM was removed, making it possible to use low-energy ions with shorter ranges. Where removal of part of the package is not possible, facilities at Michigan State, NASA Space Radiation Laboratory, GANIL (France) and GSI (Germany) offer high-energy heavy ions with long ranges so that the ions can reach the devices' sensitive volumes without much change in the LET. Unfortunately, a run will typically involve only one ion species having a single energy and LET due to the long time it takes to tune a new energy. The Variable Depth Bragg Peak (VDBP) method is similar to the above method in that it involves the use of high-energy heavy ions that are able to pass through the packaging material and reach the device, obviating the need to remove the package. However, the method provides a broad range of LETs from a single ion by inserting degraders in the beam that modify the ion energy and, therefore, the LET. The crux of the method involves establishing a fiduciary point for degrader thickness, i.e., where the Bragg peak is located precisely at the sensitive volume in the device, for which the measured SEU cross-section and the ion LET are both also maxima and can be calculated using a Monte-Carlo program, TRIM. Once the fiduciary point has been established, calibrated high density polyethylene (HDPE) degraders are inserted into or removed from the beam to vary the ion LET at the device in a known manner. After each change of degrader thickness, the SEU cross-section is measured

  5. UV writing of advanced Bragg gratings in optical waveguides

    DEFF Research Database (Denmark)

    Jensen, Jesper Bo Damm

    2002-01-01

    The subject of this ph.d. thesis is the fabrication of Bragg gratings in optical waveguides. During the study Bragg gratings were written in both planar waveguides and optical fibers using pulsed or continuous-wave lasers operating in the ultraviolet (UV) range. The main result is the development...... half the periodicity of the index modulation profile in the Bragg grating. A phase shift in the grating is realized by shifting the UV irradiance from one polarization to the other during the grating inscription. The amplitude of the modulation can also be varied continuously by changing the ration...... phase shifts were then translated into a polarizer angle profile and the Bragg grating were written using a pulsed excimer laser. Only optical fibers were used in this part of the thesis. The high quality planar waveguides used during the study were produced in the cleanroom facility at the...

  6. Observation of sub-Bragg diffraction of waves in crystals

    CERN Document Server

    Huisman, Simon R; Hartsuiker, Alex; Woldering, Léon A; Mosk, Allard P; Vos, Willem L

    2011-01-01

    We investigate the diffraction conditions and associated formation of stopgaps for waves in crystals with different Bravais lattices. We identify a prominent stopgap in high-symmetry directions that occurs at a frequency below the ubiquitous first-order Bragg condition. This sub-Bragg diffraction condition is demonstrated by reflectance spectroscopy on two-dimensional photonic crystals with a centred rectangular lattice, revealing prominent diffraction peaks for both the sub-Bragg and first-order Bragg condition. These results have implications for wave propagation in 2 of the 5 two-dimensional Bravais lattices and 7 out of 14 three-dimensional Bravais lattices, such as centred rectangular, triangular, hexagonal and body-centred cubic.

  7. Bragg Reflection of Waves by Different Shapes of Artificial Bars

    Institute of Scientific and Technical Information of China (English)

    许泰文; 张宪国; 蔡立宏

    2002-01-01

    Experiments are performed in a wave flume to demonstrate the Bragg reflection of linear gravity waves by artificialbars. Three different artificial bars with rectangular, triangular and rectified cosinoidal shapes are placed discretely on theseabed for measurement of the Bragg reflection. A series of experimental conditions including the number of bars, the pe-riodic bar spacing, the water depth and various wave conditions are tested. Key parameters influencing the Bragg reso-nances are investigated. The experimental data are compared with the values from both theoretical and numerical models.Some key parameters have proved to be effective in describing the primary resonances. Predictive equations of the charac-teristics for the Bragg reflection are proposed in this paper.

  8. Bragg-Fresnel optics: New field of applications

    International Nuclear Information System (INIS)

    Bragg-Fresnel Optics shows excellent compatibility with the third generation synchrotron radiation sources such as ESRF and is capable of obtaining monochromatic submicron focal spots with 108-109 photons/sec in an energy bandwidth of 10-4-10-6 and in a photon energy range between 2-100 keV. New types of Bragg-Fresnel lenses like modified, ion implanted, bent and acoustically modulated were tested. Microprobe techniques like microdiffraction and microfluorescence based on Bragg-Fresnel optics were realised at the ESRF beamlines. Excellent parameters of the X-ray beam at the ESRF in terms of low emittance and quite small angular source size allow for Bragg-Fresnel optics to occupy new fields of applications such as high resolution diffraction, holography, interferometry and phase contrast imaging

  9. Structural Health Monitoring Using Fiber Bragg Grating Sensor Matrix Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fiber Bragg Grating had been identified as very important elements, especially for strain measurements in smart structures. In many applications, arrays of FBG...

  10. Bragg-Fresnel optics: New field of applications

    Energy Technology Data Exchange (ETDEWEB)

    Snigirev, A. [ESRF, Grenoble (France)

    1997-02-01

    Bragg-Fresnel Optics shows excellent compatibility with the third generation synchrotron radiation sources such as ESRF and is capable of obtaining monochromatic submicron focal spots with 10{sup 8}-10{sup 9} photons/sec in an energy bandwidth of 10{sup -4}-10{sup -6} and in a photon energy range between 2-100 keV. New types of Bragg-Fresnel lenses like modified, ion implanted, bent and acoustically modulated were tested. Microprobe techniques like microdiffraction and microfluorescence based on Bragg-Fresnel optics were realised at the ESRF beamlines. Excellent parameters of the X-ray beam at the ESRF in terms of low emittance and quite small angular source size allow for Bragg-Fresnel optics to occupy new fields of applications such as high resolution diffraction, holography, interferometry and phase contrast imaging.

  11. The localized surface plasmon resonances based on a Bragg reflector

    Science.gov (United States)

    Wang, Jie; Liu, Yumin; Yu, Zhongyuan; Ye, Chunwei; Lv, Hongbo; Shu, Changgan

    2014-09-01

    In this paper, we present the theoretical analysis on how the wavelength of the localized surface plasmon resonances of gold nanoparticle can lead shift for the resonance wavelength. In our results, we calculate the scattering cross-section, the absorption cross-section and the field enhancement due to the nanoparticle. Numerical simulation were done using the finite element method (FEM). The work that we do here is different from the previous work because we use the Bragg reflector as a substrate. The Bragg reflector has a property of high reflectivity in some certain frequency bandwidth because of its periodic structure. The coherence interference of the Bragg reflector contributes to the plasmon resonances and results in some special character for a wide variety application, from sensing to photovoltaic. The periodic number of the Bragg reflector substrate and shapes of the nanoparticles are also discussed that result in a shift of the resonance wavelength.

  12. Time/Wavelength Fiber Bragg Grating Multiplexing Sensor Array

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A novel time/wavelength-multiplexed fiber Bragg grating sensor array is presented. This type of sensor array has the advantages of more points for multi-point measurement, simple structure and low cost.

  13. Koblitz Curve Cryptosystem

    DEFF Research Database (Denmark)

    Lange, Tanja

    2005-01-01

    Hyperelliptic curves over finite fields are used in cryptosystems. To reach better performance, Koblitz curves, i.\\,e. subfield curves, have been proposed. We present fast scalar multiplication methods for Koblitz curve cryptosystems for hyperelliptic curves enhancing the techniques published so...... far. For hyperelliptic curves, this paper is the first to give a proof on the finiteness of the Frobenius-expansions involved, to deal with periodic expansions, and to give a sound complexity estimate. As a second topic we consider a different, even faster set-up. The idea is to use a $\\tau...

  14. Fibre Bragg Grating Components for Filtering, Switching and Lasing

    OpenAIRE

    Yu, Zhangwei

    2008-01-01

    Fibre Bragg gratings (FBGs) are key components for a vast number of applications in optical communication systems, microwave photonics systems, and optical sensors, etc. The main topic of this thesis is fibre Bragg grating fabrication and applications in direct microwave optical filtering, high speed switching and switchable dual-wavelength fibre lasers. First, a brief overview is given about the photosensitivity in optical fibre, basic FBG fabrication techniques, the popular coupled-mode the...

  15. Photonic scanning receiver using an electrically tuned fiber Bragg grating.

    Science.gov (United States)

    Rugeland, P; Yu, Z; Sterner, C; Tarasenko, O; Tengstrand, G; Margulis, W

    2009-12-15

    A 5-cm-long electrically tuned fiber Bragg grating is used to filter a microwave signal on an optical carrier at 1.55 mum. A chirped distributed-feedback structure is employed, with a transmission bandwidth of 54 MHz and relative optical carrier rejection of >30 dB for rf frequencies >2 GHz. The rapid monotonic sweep of the Bragg wavelength is translated into a fast-frequency sweep for rf analysis. PMID:20016616

  16. Sensibility of different Bragg curve profile in output energies of proton beams in heterogeneous targets

    International Nuclear Information System (INIS)

    Full text. In the recent years, the use of proton beams in radiotherapy has been an outstanding progress. Up to now, the CT is a requirement for treatment planning in this kind of therapy because it provides the electron density distribution required for dose and range calculations. However, the use of CT images for proton treatment planning ignores fundamental differences in physical interaction processes between photons and protons and is, therefore, potentially inaccurate. Proton CT (pCT) can in principle directly measure the density distribution needed in a patient for the dose distribution. One important problem that should be solved is the implementation of image reconstruction algorithms. In this sense, it is necessary to know how the presence of materials with different density and composition interfere in the energy deposition by ionization and coulomb excitation, during its trajectory. The study was conducted in two stages, in both SRIM and MCNPX codes were used to perform all simulations of the interaction of proton beams with pencil beam shape, for energies in the range from 100 to 250 MeV. The first part was used a target of 50 mm with a 6 mm layer of cortical bone (ICRP) and the rest of water. The bone's position was being varied in step of 5 mm. The second part the layer of bone was divided into two equal parts, placed at the ends of the target and were being approached in the same step of the first part. The obtained data were energy, position (X,Y,Z) for each axis that was used to obtain the averages, histograms and Gaussian such data for each position of heterogeneity. From these data, we have aimed at making a comparative analysis to study how the position of the heterogeneity influences on the energy and the feasibility of computer code for simulations more realistic.

  17. Curve complexes are rigid

    OpenAIRE

    Rafi, Kasra; Schleimer, Saul

    2007-01-01

    Any quasi-isometry of the complex of curves is bounded distance from a simplicial automorphism. As a consequence, the quasi-isometry type of the curve complex determines the homeomorphism type of the surface.

  18. Forward Rate Curve Smoothing

    OpenAIRE

    Jarrow, Robert A

    2014-01-01

    This article reviews the forward rate curve smoothing literature. The key contribution of this review is to link the static curve fitting exercise to the dynamic and arbitrage-free models of the term structure of interest rates. As such, this review introduces more economics to an almost exclusively mathematical exercise, and it identifies new areas for research related to forward rate curve smoothing.

  19. Dynamic fiber Bragg grating sensing method

    Science.gov (United States)

    Ho, Siu Chun Michael; Ren, Liang; Li, Hongnan; Song, Gangbing

    2016-02-01

    The measurement of high frequency vibrations is important in many scientific and engineering problems. This paper presents a novel, cost effective method using fiber optic fiber Bragg gratings (FBGs) for the measurement of high frequency vibrations. The method uses wavelength matched FBG sensors, with the first sensor acting as a transmission filter and the second sensor acting as the sensing portion. Energy fluctuations in the reflection spectrum of the second FBG due to wavelength mismatch between the sensors are captured by a photodiode. An in-depth analysis of the optical circuit is provided to predict the behavior of the method as well as identify ways to optimize the method. Simple demonstrations of the method were performed with the FBG sensing system installed on a piezoelectric transducer and on a wind turbine blade. Vibrations were measured with sampling frequencies up to 1 MHz for demonstrative purposes. The sensing method can be multiplexed for use with multiple sensors, and with care, can be retrofitted to work with FBG sensors already installed on a structure.

  20. Fiber Bragg grating sensing of detonation and shock experiments at Los Alamos National Laboratory

    Science.gov (United States)

    Rodriguez, G.; Sandberg, R. L.; Jackson, S. I.; Dattelbaum, D. M.; Vincent, S. W.; McCulloch, Q.; Martinez, R. M.; Gilbertson, S. M.; Udd, E.

    2013-05-01

    An all optical-fiber-based approach to measuring high explosive detonation front position and velocity is described. By measuring total light return using an incoherent light source reflected from a fiber Bragg grating sensor in contact with the explosive, dynamic mapping of the detonation front position and velocity versus time is obtained. We demonstrate two calibration procedures and provide several examples of detonation front measurements: PBX 9502 cylindrical rate stick, radial detonation front in PBX 9501, and PBX 9501 detonation along a curved meridian line. In the cylindrical rate stick measurement, excellent agreement with complementary diagnostics (electrical pins and streak camera imaging) is achieved, demonstrating accuracy in the detonation front velocity to below the 0.3% level when compared to the results from the pin data. In a similar approach, we use embedded fiber grating sensors for dynamic pressure measurements to test the feasibility of these sensors for high pressure shock wave research in gas gun driven flyer plate impact experiments. By applying well-controlled steady shock wave pressure profiles to soft materials such as PMMA, we study the dynamic pressure response of embedded fiber Bragg gratings to extract pressure amplitude of the shock wave. Comparison of the fiber sensor results is then made with traditional methods (velocimetry and electro-magnetic particle velocity gauges) to gauge the accuracy of the approach.

  1. ECM using Edwards curves

    DEFF Research Database (Denmark)

    Bernstein, Daniel J.; Birkner, Peter; Lange, Tanja; Peters, Christiane Pascale

    2013-01-01

    This paper introduces EECM-MPFQ, a fast implementation of the elliptic-curve method of factoring integers. EECM-MPFQ uses fewer modular multiplications than the well-known GMP-ECM software, takes less time than GMP-ECM, and finds more primes than GMP-ECM. The main improvements above the modular......-arithmetic level are as follows: (1) use Edwards curves instead of Montgomery curves; (2) use extended Edwards coordinates; (3) use signed-sliding-window addition-subtraction chains; (4) batch primes to increase the window size; (5) choose curves with small parameters and base points; (6) choose curves with large...

  2. Differentiability of fractal curves

    OpenAIRE

    Bandt, Christoph; Kravchenko, Alexey

    2010-01-01

    While self-similar sets have no tangents at any single point, self-affine curves can be smooth. We consider plane self-affine curves without double points and with two pieces. There is an open subset of parameter space for which the curve is differentiable at all points except for a countable set. For a parameter set of codimension one, the curve is continuously differentiable. However, there are no twice differentiable self-affine curves in the plane, except for parabolic arcs.

  3. On maximal curves

    CERN Document Server

    Fuhrmann, R; Torres, F; Fuhrmann, Rainer; Garcia, Arnaldo; Torres, Fernando

    1996-01-01

    We study arithmetical and geometrical properties of maximal curves, that is, curves defined over the finite field F_{q^2} whose number of F_{q^2}-rational points reaches the Hasse-Weil upper bound. Under a hypothesis on non-gaps at a rational point, we prove that maximal curves are F_{q^2}-isomorphic to y^q + y = x^m, for some $m \\in Z^+$. As a consequence we show that a maximal curve of genus g=(q-1)^2/4 is F_{q^2}-isomorphic to the curve y^q + y = x^{(q+1)/2}.

  4. First order Bragg grating filters in silicon on insulator waveguides

    Science.gov (United States)

    Waugh, Peter Michael

    2008-08-01

    The subject of this project is the design; analysis, fabrication and characterisation of first order Bragg Grating optical filters in Silicon-on-Insulator (SOI) planar waveguides. It is envisaged that this work will result in the possibility of Bragg Grating filters for use in Silicon Photonics. It is the purpose of the work to create as far as is possible flat surface waveguides so as to facilitate Thermo-Optic tuning and also the incorporation into rib-waveguide Silicon Photonics. The spectral response of the shallow Bragg Gratings was modelled using Coupled Mode Theory (CMT) by way of RSoft Gratingmod TM. Also the effect of having a Bragg Grating with alternate layers of refractive index of 1.5 and 3.5 was simulated in order to verify that Silica and Silicon layered Bragg Gratings could be viable. A series of Bragg Gratings were patterned on 1.5 micron SOI at Philips in Eindhoven, Holland to investigate the variation of grating parameters with a) the period of the gratings b) the mark to space ratio of the gratings and c) the length of the region converted to Bragg Gratings (i.e. the number of grating period repetitions). One set of gratings were thermally oxidised at Philips in Eindhoven and another set were ion implanted with Oxygen ions at the Ion Beam Facility, University of Surrey, England. The gratings were tested and found to give transmission minima at approximately 1540 nanometres and both methods of creating flat surfaces were found to give similar minima. Atomic Force Microscopy was applied to the grating area of the as-implanted samples in the Advanced Technology Institute, University of Surrey, which were found to have surface undulations in the order of 60 nanometres.

  5. The antiproton depth–dose curve measured with alanine detectors

    CERN Document Server

    Bassler, Niels; Palmans, Hugo; Holzscheiter, Michael H; Kovacevic, Sandra

    2008-01-01

    n this paper we report on the measurement of the antiproton depth–dose curve, with alanine detectors. The results are compared with simulations using the particle energy spectrum calculated by FLUKA, and using the track structure model of Hansen and Olsen for conversion of calculated dose into response. A good agreement is observed between the measured and calculated relative effectiveness although an underestimation of the measured values beyond the Bragg-peak remains unexplained. The model prediction of response of alanine towards heavy charged particles encourages future use of the alanine detectors for dosimetry of mixed radiation fields.

  6. Tunable Polymer Fiber Bragg Grating (FBG) Inscription: Fabrication of Dual-FBG Temperature Compensated Polymer Optical Fiber Strain Sensors

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bang, Ole

    2012-01-01

    We demonstrate stable wavelength tunable inscription of polymer optical fiber Bragg gratings (FBGs). By straining the fiber during FBG inscription, we linearly tune the center wavelength over 7 nm with less than 1% strain. Above 1% strain, the tuning curve saturates and we show a maximum tuning o...... 12 nm with 2.25% strain. We use this inscription method to fabricate a dual-FBG strain sensor in a poly (methyl methacrylate) single-mode microstructured polymer optical fiber and demonstrate temperature compensated strain sensing around 850 nm....

  7. Fabrication and optical characterization of Bragg resonance luminescence porous silicon

    Science.gov (United States)

    Park, Mi-Ae; Sohn, Honglae

    2016-01-01

    The synthesis and characterization of Bragg resonance luminescence porous silicon (BRL PS) exhibiting both optical reflectivity and strong narrow visible photoluminescence (PL) prepared from highly doped n-type silicon wafers through the electrochemical etching are reported. BRL PS showing the luminescence at 702 nm with an excitation wavelength of 400 nm was prepared by applying the current of 360 mA cm-2 for 1.6 s and 75 mA cm-2 for 3.6 s with 50 repeats in etching solution of 1:1 volume mixture of absolute ethanol and aqueous 48% HF. BRL PS exhibited sharp PL peak which reached full width at half maximum of 14 nm, originated from the result of Bragg resonance in PS multilayer. The sharp PL peak at 702 nm of BRL PS is the second-order transmitted luminescence peak by Bragg resonance phenomenon. The simultaneous measurement of reflectivity and luminescence in the BRL PS under an exposure to a vapor flux of acetone showed that a narrow transmitted luminescence based on Bragg resonance in BRL PS quenched as well as the red-shifted by 37 nm of reflection wavelength was observed. A dramatic quenching PL of BRL PS compare to that of the monolayer PS, is probably due to the Bragg resonance effect on luminescence.

  8. Recent advances and prospects of Bragg-Fresnel optics

    International Nuclear Information System (INIS)

    Diffraction optics, i.e. Fresnel zone plates, holograms and diffraction gratings, has a limited application in the optical wavelength range. A decrease in wavelength to 100 nm and less changes conventional relationships between different types of optical elements owing to the change in the radiation-substance interaction since absorption starts to play a more important role as compared to refraction. Therefore at 1 nm approx lt λ approx lt 100 nm focusing elements may be fabricated only from thin membranes distinguished by an abrupt change of either absorption (amplitude zone plates) or transmitted wave phase (phase zone plates). In this wavelength range it is necessary that three-dimensional Bragg and Bragg-Fresnel elements should be used. Three-dimensional elements appear to be efficient for the whole short wavelength range 10-2 nm approx lt λ approx lt 100 nm. In doing so, the use of Bragg diffraction enables fabrication of high resolution gratings, radiation modulators and prisms. Thus, two- and three-dimensional diffraction elements form the basis for production of multifunctional x-ray optics in a wide wavelength range. It is essential that these elements can be reproduced in production quantities. Below is a summary of the results obtained at the Institute of Problems of Microelectronics Technology and High Purity Materials (IPMT) of the USSR Academy of Sciences in 1984-88. Emphasis is placed on Bragg- and Bragg-Fresnel elements that are fundamental for future x-ray optics. 15 refs., 2 figs., 1 tab

  9. Doubling rational normal curves

    OpenAIRE

    Notari, Roberto; Ojeda, Ignacio; Spreafico, Maria Luisa

    2008-01-01

    In this paper, we study double structures supported on rational normal curves. After recalling the general construction of double structures supported on a smooth curve described in \\cite{fer}, we specialize it to double structures on rational normal curves. To every double structure we associate a triple of integers $ (2r,g,n) $ where $ r $ is the degree of the support, $ n \\geq r $ is the dimension of the projective space containing the double curve, and $ g $ is the arithmetic genus of the...

  10. Temperature Compensation for Double Fiber Bragg Grating Sensors

    Institute of Scientific and Technical Information of China (English)

    WANG Chun-cheng; LIU Jia; ZHENG Jian-bang

    2006-01-01

    A novel double fiber Bragg grating(FBG) strain sensor configuration is presented. Temperature compensation method is based on double FBG moored on a rhombus frame. Through the theoretical analysis,the relation between relative shift of Bragg wavelength and the strain applied on the sensor is obtained,and the analytical expression of strain sensitivity coefficient is also given. The experiment results show that:in the strain range of 0~0.8 mm,the relation between the relative shift of Bragg wavelength and applied strain is linear,and the dispersion of double FBG wavelength at the range of -25 ℃~60 ℃ is 0~0.002 nm. The strain sensitivity of the displacement sensor configuration is 0.171 nm/με,and is nearly twice than that of single FC sensor.

  11. Flexible nanofiber-coupled hybrid plasmonic Bragg grating.

    Science.gov (United States)

    Liu, Sheng; Zhou, Linjie; Xu, Jian; Wang, Xinyi; Chen, Jianping

    2016-05-01

    We report a hybrid plasmonic Bragg grating composed of a nanofiber coupled with orthogonally oriented metal strips. Numerical simulations are performed to study the transmission and reflection spectra of the grating. It shows that the TM polarization has much stronger Bragg reflection due to the excitation of hybrid plasmonic modes. The dependence of reflection peaks on several key device parameters is analyzed. Light propagation simulation further reveals that both fundamental and first-order TM modes are excited upon Bragg reflection, leading to two separate peaks in the spectrum. We implement the prototype device by attaching a nanofiber onto the surface of an array of sub-micrometer-wide metal strips. The main reflection peak is measured to have a 3-dB bandwidth of 15 nm and out-of-band rejection of more than 30 dB. The effects of nanofiber radius, alignment angle and coupling length on the device performance are also experimentally investigated. PMID:27137547

  12. Tunable plasmonic Bragg reflector with different graphene nanoribbon widths

    Science.gov (United States)

    Zhuang, Huawei; Kong, Fanmin; Li, Kang; Sheng, Shiwei

    2015-09-01

    We propose and numerically analyze a Bragg reflector composed of periodically arranged graphene nanoribbon waveguides with different widths. Because of the unique property of the graphene edge mode, the effective index contrast used for the reflector can be obtained by designing graphene nanoribbons with different widths without changing the dielectric substrate structure. Good band stop filtering characteristics are shown at the band gap of the transmission spectrum by numerical simulation. The performance of the proposed Bragg reflector is analyzed in terms of different parameters, such as the chemical potential, the number of periods, and the size of the unit cell. The proposed Bragg reflector will be expected to have important potential applications in the highly integrated SPP-based photonic devices.

  13. A plating method for metal coating of fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Yulong Li; Hua Zhang; Yan Feng; Gang Peng

    2009-01-01

    We present a method for metal coating optical fiber and in-fiber Bragg grating. The technology process which is based on electroless plating and electroplating method is described in detail. The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer. Under the optimum conditions, the surfaces of chemical plating and electroplating coatings are all smooth and compact. There is no visible defect found in the cross-section. Using this two-step metallization method, the in-fiber Bragg grating can be well protected and its thermal sensitivity can be enhanced. After the metallization process, the fiber sensor is successfully embedded in the 42CrMo steel by brazing method. Thus a smart metal structure is achieved. The embedding results show that the plating method for metallization protection of in-fiber Bragg grating is effective.

  14. Holographic Bragg gratings: measurements and examination diffraction parameters

    CERN Document Server

    Tikhonov, E A

    2015-01-01

    Measurement and analysis of diffraction parameters of thick transmission holographic phase gratings recorded on PHC-488 photopolymer are presented. Precision determination of the spatial grating period is executed by Bragg angle measurement for two precisely known wavelengths in the first diffraction order and also by Bragg angle measurement on one wavelength in the first and second diffraction orders. Determination of actual grating thickness and depths of spatial modulation of a holographic recording, which are responsible for their main optical characteristics, is carried out with the application of H. Kogelnik 2-wave coupled model. Calculated and experimental Bragg angles in two orthogonal orientated planes of linear polarized laser light were used to confirm theoretical model with experimental results. Extreme values of the diffraction parameters, efficiency and spectral resolution, important for holographic phase grating applications are analyzed.

  15. RELATIVE BIOLOGICAL EFFECTIVENESS IN A PROTON SOBP

    Czech Academy of Sciences Publication Activity Database

    Vachelová, Jana; Michaelidesová, Anna; Litvinchuk, Alexandra; Vondráček, V.; Davídková, Marie

    Vol. 34. Bratislava : SMU - Faculty of Public Health, 2014. s. 121-121. ISBN 978-80-89384-08-2. [XXXVI.Dny radiační ochrany. 10.11.2014-14.11.2014, Poprad] Institutional support: RVO:61389005 Keywords : relative biological effectiveness * Spread-Out Bragg Peak * linear energy transfer Subject RIV: BO - Biophysics

  16. BRAGG-PEAK LOCATION EMPLOYING A MAXIMUM-ENTROPY FORMALISM

    OpenAIRE

    Lehmann, M.; Robinson, T.; Wilkins, S.

    1986-01-01

    The maximum entropy method has been tried on simulated data from a small 2-dimensional position-sensitive detector. Constraints were introduced to account for smoothness and the fact that only one peak was found within the frame of the recording. Analysis of a large number of weak Bragg peaks with I/σ(I) < 9 and of different size and background showed the method to give virtually bias-free results. The computing time is sufficiently low to allow real time use on measurements of a single Bragg...

  17. Temperature sensor based on dual fiber Bragg gratings

    OpenAIRE

    Ekestam, Henrik; Larsson, Jim

    2015-01-01

    The objective of the project was to examine if it was possible to develop a low-cost temperature sensor using dual fiber Bragg gratings (FBGs). The intention was to use one FBG as a reference and let the other FBG function as the sensor. The study shows that it is possible to characterize the temperature sensitivity of each FBG and use the reference to sweep over the applicable spectrum to find the Bragg-wavelength of the sensor. This could be done measuring only the total intensity instead o...

  18. A novel optical filter of fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    LI; Xiaolu; JIANG; Yuesong

    2006-01-01

    A theory of a novel optical filter of drawing the fiber Bragg grating by the heated elastic sheet is advanced. Based on the heat conduction equation, a set of functions of temperature and thermal expansion on the heated elastic sheet are calculated. And the most displacement of the heated elastic sheet is also described. Finally the expression of the reflected Bragg wavelength deviation in terms of the thermal power density of heat-source is deduced. The physics feasibility of these conclusions mentioned above is proved. It is a potential value for the novel optical filter to research.

  19. Bridge pier scour measurement by means of Bragg grating arrays

    Directory of Open Access Journals (Sweden)

    Manzoni S.

    2010-06-01

    Full Text Available This paper deals with a new method to measure scour level at bridge piers. The proposed technique is based on an array of Bragg grating temperature sensors, heated by an electrical circuit. The Bragg gratings in water sense a lower temperature than those buried in the river bed, because of the different heat scattering principles in the two situations. Furthermore the response of each sensor is slower if it is buried in the bed, with respect to the case it is in water. The paper presents laboratory tests, showing the method effectiveness and reliability, and it explains the advantages with respect to other more traditional methodologies to measure scour level.

  20. Bragg grating chemical sensor with hydrogel as sensitive element

    Institute of Scientific and Technical Information of China (English)

    Xiaomei Liu(刘小梅); Shilie Zheng(郑史烈); Xianmin Zhang(章献民); Jun Cong(丛军); Kangsheng Chen(陈抗生); Jian Xu(徐坚)

    2004-01-01

    A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress resulted from volume change of sensitive swellable hydrogel responding to the change of external environment. A polyacrylamide hydrogel fiber grating chemical sensor is made, and the experiments on its sensitivity to the salinity are performed. The sensitivity is low due to the less stress from the shrinking or swelling of hydrogels. Reducing the cross diameter of the grating through etching with hydrofluoric acid can greatly improve the sensitivity of the sensor.

  1. The curves not carried

    OpenAIRE

    Gadre, Vaibhav; Schleimer, Saul

    2014-01-01

    Suppose $\\tau$ is a train track on a surface $S$. Let $C(\\tau)$ be the set of isotopy classes of simple closed curves carried by $\\tau$. Masur and Minsky [2004] prove $C(\\tau)$ is quasi-convex inside the curve complex $C(S)$. We prove the complement, $C(S) - C(\\tau)$, is quasi-convex.

  2. Simulating Supernova Light Curves

    Energy Technology Data Exchange (ETDEWEB)

    Even, Wesley Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dolence, Joshua C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-05

    This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth’s atmosphere.

  3. Power curve investigation

    DEFF Research Database (Denmark)

    Villanueva, Héctor; Vesth, Allan

    performed according to IEC 61400-12-1 [1]. Therefore, the results presented in this report cannot be considered a power curve according to the reference standard, and are referred to as “power curve investigation” instead. The measurements have been performed by a customer and the data analysis has been...

  4. Tempo curves considered harmful

    NARCIS (Netherlands)

    Desain, P.; Honing, H.

    1993-01-01

    In the literature of musicology, computer music research and the psychology of music, timing or tempo measurements are mostly presented in the form of continuous curves. The notion of these tempo curves is dangerous, despite its widespread use, because it lulls its users into the false impression th

  5. Measurement of distributed strain and temperature based on higher order and higher mode Bragg conditions

    Science.gov (United States)

    Sirkis, James S. (Inventor); Sivanesan, Ponniah (Inventor); Venkat, Venki S. (Inventor)

    2001-01-01

    A Bragg grating sensor for measuring distributed strain and temperature at the same time comprises an optical fiber having a single mode operating wavelength region and below a cutoff wavelength of the fiber having a multimode operating wavelength region. A saturated, higher order Bragg grating having first and second order Bragg conditions is fabricated in the optical fiber. The first order of Bragg resonance wavelength of the Bragg grating is within the single mode operating wavelength region of the optical fiber and the second order of Bragg resonance wavelength is below the cutoff wavelength of the fiber within the multimode operating wavelength region. The reflectivities of the saturated Bragg grating at the first and second order Bragg conditions are less than two orders of magnitude of one another. In use, the first and second order Bragg conditions are simultaneously created in the sensor at the respective wavelengths and a signal from the sensor is demodulated with respect to each of the wavelengths corresponding to the first and second order Bragg conditions. Two Bragg conditions have different responsivities to strain and temperature, thus allowing two equations for axial strain and temperature to be found in terms of the measure shifts in the primary and second order Bragg wavelengths. This system of equations can be solved for strain and temperature.

  6. Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids

    International Nuclear Information System (INIS)

    This paper is concerned with micromachining of optical fibre Bragg gratings (FBGs) using a femtosecond pulsed laser. The purpose of this work is to increase the sensitivity of FBGs for simultaneous monitoring of the concentration of chemicals and biological liquids and their temperature. A Ti : sapphire regenerative amplifier was utilized to inscribe micro-grooves with widths of 16 and 22 μm in the cladding of the optical fibres. Due to the core-confined light propagation characteristics of FBGs, their sensitivity to the changes in the index of refraction of the surrounding medium is minimal. However, by creating micro-grooves in the cladding layer, the index of refraction of the surrounding medium becomes effective in the coupling of the propagating core modes. As the index of refraction of liquids depends on the composition and concentration, the FBG with micromachined cladding can provide enough sensitivity to be used in chemical sensing. The performance of the micromachined FBGs was investigated by immersing them in different liquid solutions of polyvinyl butyral (PVB) in ethanol and obtaining their thermal responses. Results showed that the optical response of the micromachined FBGs (i.e. red shift in Bragg wavelength) is different by up to 10% in PVB solutions in ethanol than in ethanol alone. The micromachined FBGs can be used to monitor the concentration as well as the temperature of a solution

  7. Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids

    Energy Technology Data Exchange (ETDEWEB)

    Alemohammad, H; Toyserkani, E [Department of Mechanical and Mechatronics Engineering, University of Waterloo, ON N2L 3G1 (Canada); Pinkerton, A J [School of Mechanical, Aerospace and Civil Engineering, University of Manchester, PO Box 88, Manchester, M60 1QD (United Kingdom)], E-mail: etoyserk@uwaterloo.ca, E-mail: shalemoh@uwaterloo.ca, E-mail: andrew.pinkerton@manchester.ac.uk

    2008-09-21

    This paper is concerned with micromachining of optical fibre Bragg gratings (FBGs) using a femtosecond pulsed laser. The purpose of this work is to increase the sensitivity of FBGs for simultaneous monitoring of the concentration of chemicals and biological liquids and their temperature. A Ti : sapphire regenerative amplifier was utilized to inscribe micro-grooves with widths of 16 and 22 {mu}m in the cladding of the optical fibres. Due to the core-confined light propagation characteristics of FBGs, their sensitivity to the changes in the index of refraction of the surrounding medium is minimal. However, by creating micro-grooves in the cladding layer, the index of refraction of the surrounding medium becomes effective in the coupling of the propagating core modes. As the index of refraction of liquids depends on the composition and concentration, the FBG with micromachined cladding can provide enough sensitivity to be used in chemical sensing. The performance of the micromachined FBGs was investigated by immersing them in different liquid solutions of polyvinyl butyral (PVB) in ethanol and obtaining their thermal responses. Results showed that the optical response of the micromachined FBGs (i.e. red shift in Bragg wavelength) is different by up to 10% in PVB solutions in ethanol than in ethanol alone. The micromachined FBGs can be used to monitor the concentration as well as the temperature of a solution.

  8. Learning Curve? Which One?

    Directory of Open Access Journals (Sweden)

    Paulo Prochno

    2004-07-01

    Full Text Available Learning curves have been studied for a long time. These studies provided strong support to the hypothesis that, as organizations produce more of a product, unit costs of production decrease at a decreasing rate (see Argote, 1999 for a comprehensive review of learning curve studies. But the organizational mechanisms that lead to these results are still underexplored. We know some drivers of learning curves (ADLER; CLARK, 1991; LAPRE et al., 2000, but we still lack a more detailed view of the organizational processes behind those curves. Through an ethnographic study, I bring a comprehensive account of the first year of operations of a new automotive plant, describing what was taking place on in the assembly area during the most relevant shifts of the learning curve. The emphasis is then on how learning occurs in that setting. My analysis suggests that the overall learning curve is in fact the result of an integration process that puts together several individual ongoing learning curves in different areas throughout the organization. In the end, I propose a model to understand the evolution of these learning processes and their supporting organizational mechanisms.

  9. In-Situ Cure Monitoring of Wind Turbine Blades by Using Fiber Bragg Grating Sensors and Fresnel Reflection Measurement

    Directory of Open Access Journals (Sweden)

    Umesh Sampath

    2015-07-01

    Full Text Available A fiber-optic cure monitoring system is proposed to measure curing status of composite structure such as a large scale wind turbine blade. The monitoring is based on the measurement of Fresnel reflectivity at the optical fiber/epoxy resin interface. The refractive index of epoxy resin varies throughout curing stages, changing the Fresnel reflectivity. The curing status is decided by monitoring the reflected intensity variation. The usage of fiber Bragg grating (FBG sensor helps to separate the temperature-induced cross effects. A Gaussian curve fitting algorithm was applied to FBG spectra which were distorted in curing procedure. The substantial measurement errors could be minimized by locating the centroids of the Gaussian curve-fitted spectra. From the experiments performed in various isothermal conditions, the proposed system successfully identified the onset of gelation and the completion of curing of epoxy resins.

  10. Laffer Curves in Japan

    OpenAIRE

    Kengo Nutahara

    2013-01-01

    This paper investigates the Laffer curves in Japan, based on a neoclassical growth model. It is found that while the labor tax rate is smaller than that at the peak of the Laffer curve, the capital tax rate is either very close to, or larger than, that at the peak of the Laffer curve. This problem is more serious when the consumption tax rate is high. It is also found that to maximize total tax revenue, the government should increase the labor tax rate but decrease the capital tax rate

  11. Rational solitons in deep nonlinear optical Bragg grating

    NARCIS (Netherlands)

    Alatas, H.; Iskandar, A.A.; Tjia, M.O.; Valkering, T.P.

    2006-01-01

    We have examined the rational solitons in the Generalized Coupled Mode model for a deep nonlinear Bragg grating. These solitons are the degenerate forms of the ordinary solitons and appear at the transition lines in the parameter plane. A simple formulation is presented for the investigation of the

  12. The Wavelength Shifting and Temperature Athermalization of Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Yu; e; Kong

    2003-01-01

    The wavelength shifting properties and the temperature athermalization technology of fiber Bragg grating (FBG) were studied in this paper, and then two different athermalization methods were introduced. The research shows that FBG with athermalization by applying the substrate with negative coefficient of thermal expansion is effective and can be used in many fields.

  13. A highly sensitive fiber Bragg grating diaphragm pressure transducer

    Science.gov (United States)

    Allwood, Gary; Wild, Graham; Lubansky, Alex; Hinckley, Steven

    2015-10-01

    In this work, a novel diaphragm based pressure transducer with high sensitivity is described, including the physical design structure, in-depth analysis of optical response to changes in pressure, and a discussion of practical implementation and limitations. A flat circular rubber membrane bonded to a cylinder forms the body of the transducer. A fiber Bragg grating bonded to the center of the diaphragm structure enables the fractional change in pressure to be determined by analyzing the change in Bragg wavelength of the reflected spectra. Extensive evaluation of the physical properties and optical characteristics of the transducer has been performed through experimentation, and modeling using small deformation theory. The results show the transducer has a sensitivity of 0.116 nm/kPa, across a range of 15 kPa. Ultra-low cost interrogation of the optical signal was achieved through the use of an optically mismatched Bragg grating acting as an edge filter to convert the spectral change into an intensity change. A numerical model of the intensity based interrogation was implemented in order to validate the experimental results. Utilizing this interrogation technique and housing both the sensing and reference Bragg gratings within the main body of the transducer means it is effectively temperature insensitive and easily connected to electronic systems.

  14. Ultrafast Laser Fabrication of Bragg Waveguides in GLS Chalcogenide Glass

    Directory of Open Access Journals (Sweden)

    McMillen Ben

    2013-11-01

    Full Text Available We present work on the fabrication of Bragg waveguides in gallium-lanthanum-sulfide chalcogenide glass using an ultrafast laser. Waveguides were written with a single pass while modulating the writing beam. The spatial and temporal profile of the writing beam was ontrolled during waveguide fabrication in order to control the shape and size of the waveguide cross-section.

  15. Crystal clear the autobiographies of Sir Lawrence and Lady Bragg

    CERN Document Server

    Thomson, Patience

    2015-01-01

    The main body of this book contains the hitherto unpublished autobiographies of both William Lawrence Bragg, an innovative scientist who won the Nobel Prize for Physics in 1915, and his wife, Alice, a Mayor of Cambridge and National Chairman of Marriage Guidance. Their autobiographies give unusual insights into the lives and times of two distinguished people and the real personalities behind their public appearance.

  16. Linearized Bragg grating assisted electro-optic modulator.

    Science.gov (United States)

    Khurgin, Jacob B; Morton, Paul A

    2014-12-15

    We propose a new linearized electro-optic modulator in which linearization is achieved by modulating the index of a Bragg grating reflector placed in the arm(s) of a Michelson Interferometer. This grating-assisted Michelson (GAMI) modulator can operate as either an intensity or amplitude modulator, and is shown to significantly improve the linearity of microwave photonics links. PMID:25503037

  17. Growth and characterization of nitride-based distributed Bragg reflectors

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, Carsten; Dartsch, Heiko; Aschenbrenner, Timo; Figge, Stephan; Hommel, Detlef [Section Semiconductor Epitaxy, Institute of Solid State Physics, University of Bremen (Germany)

    2011-08-15

    We report on a systematic study concerning the realization of nitride-based distributed Bragg reflectors (DBRs) for opto-electronic applications in the near-UV to visible spectral range. Different material combinations are used in order to find an optimized trade-off concerning peak reflectivity, stop band width, and strain state of the Bragg mirrors. For the high refractive index material GaN is used in all cases, while for the low index material a layer of either AlGaN or AlInN, respectively, or a AlN/(In)GaN short-period superlattice (SL) is employed. The best peak reflectivity of 97% at a wavelength of 495 nm is achieved for a lattice matched Bragg reflector based on the GaN/AlInN material combination. Transmission electron microscopy image of a 30-fold distributed Bragg reflector consisting of AlInN (dark) and GaN (bright) layers. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Dynamic gate algorithm for multimode fiber Bragg grating sensor systems

    DEFF Research Database (Denmark)

    Ganziy, Denis; Jespersen, O.; Woyessa, Getinet;

    2015-01-01

    -to-noise ratio and different peak shapes. Our simulations and experiments demonstrate that the DGA method is fast and robust with better stability and accuracy than conventional algorithms. This makes it very attractive for future implementation in sensing systems, especially based on multimode fiber Bragg...

  19. Laser sensor with Bragg gratings of fiber optics to physics parameter measuring

    International Nuclear Information System (INIS)

    We present the operation of a fiber laser sensor made by an Erbium Doped Fiber pumped at 980nm, an 4.23 km passive fiber and two fiber Bragg gratings placed at the ends of the laser cavity. Under normal conditions, the Bragg gratings have different reflection wavelengths and laser emission is not generated. The two Bragg gratings can be placed at the same reflection wavelength when the Bragg grating with the lowest reflective wavelength increases their temperature which can be used as a sensor element. The laser generation thus shows that the Bragg grating is increasing their temperature. We used a Peltier cell for to change gradually the temperature. (Author)

  20. ROBUST DECLINE CURVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Sutawanir Darwis

    2012-05-01

    Full Text Available Empirical decline curve analysis of oil production data gives reasonable answer in hyperbolic type curves situations; however the methodology has limitations in fitting real historical production data in present of unusual observations due to the effect of the treatment to the well in order to increase production capacity. The development ofrobust least squares offers new possibilities in better fitting production data using declinecurve analysis by down weighting the unusual observations. This paper proposes a robustleast squares fitting lmRobMM approach to estimate the decline rate of daily production data and compares the results with reservoir simulation results. For case study, we usethe oil production data at TBA Field West Java. The results demonstrated that theapproach is suitable for decline curve fitting and offers a new insight in decline curve analysis in the present of unusual observations.

  1. Confined elastic curves

    CERN Document Server

    Dondl, Patrick W; Röger, Matthias

    2010-01-01

    We consider the problem of minimizing Euler's elastica energy for simple closed curves confined to the unit disk. We approximate a simple closed curve by the zero level set of a function with values +1 on the inside and -1 on the outside of the curve. The outer container now becomes just the domain of the phase field. Diffuse approximations of the elastica energy and the curve length are well known. Implementing the topological constraint thus becomes the main difficulty here. We propose a solution based on a diffuse approximation of the winding number, present a proof that one can approximate a given sharp interface using a sequence of phase fields, and show some numerical results using finite elements based on subdivision surfaces.

  2. Spectrometer with CMOS demodulation of fiber optic Bragg grating sensors

    Science.gov (United States)

    Christiansen, Martin Brokner

    A CMOS imager based spectrometer is developed to interrogate a network containing a large number of Bragg grating sensors. The spectrometer uses a Prism-Grating- Prism (PGP) to spectrally separate serially multiplexed Bragg reflections on a single fiber. As a result, each Bragg grating produces a discrete spot on the CMOS imager that shifts horizontally as the Bragg grating experiences changes in strain or temperature. The reflected wavelength of the spot can be determined by finding the center of the spot produced. The use of a randomly addressable CMOS imager enables a flexible sampling rate. Some fibers can be interrogated at a high sampling rate while others can be interrogated at a low sampling rate. However, the use of a CMOS imager leads to several unique problems in terms of signal processing. These include a logarithmic pixel response, a low signal-to-noise ratio, a long pixel time constant, and software issues. The expected capabilities of the CMOS imager based spectrometer are determined with a theoretical model. The theoretical model tests three algorithms for determining the center of the spot: single row centroid, single row parabolic fit, and entire spot centroid. The theoretical results are compared to laboratory test data and field test data. The CMOS based spectrometer is capable of interrogating many optical fibers, and in the configuration tested, the fiber bundle consisted of 23 fibers. Using this system, a single fiber can be interrogated from 778 nm to 852 nm at 2100 Hz or multiple fibers can be interrogated over the same wavelength so that the total number of fiber interrogations is up to 2100 per second. The reflected Bragg wavelength can be determined within +/-3pm, corresponding to a +/-3μɛ uncertainty.

  3. Rigid Pipelay Curve Stability

    OpenAIRE

    Andersson, Christian

    2014-01-01

    Pipeline installation would generally involve curved sections in the horizontal plane, due to existing subsea infrastructure or natural seabed characteristics. At a small curve radius, the lateral seabed friction could be insufficient providing on-bottom stability of the pipeline. Hence, additional measures like lateral supports, so called turnpoints, may be required. The effect of installing such turnpoints have been studied in this thesis, using a computer software called SIMLA. Both static...

  4. Large Curved Surface Measurement

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measurement principle of large curved surface through theodolite industry survey system is introduced. Two methods are suggested with respect to the distribution range of curved surface error. The experiments show that the measurement precision can be up to 0.15mm with relative precision of 3×10-5. Finally, something needed paying attention to and the application aspects on theodolite industry survey system are given.

  5. Tempo curves considered harmful

    OpenAIRE

    Desain, P.; Honing, H.

    1993-01-01

    In the literature of musicology, computer music research and the psychology of music, timing or tempo measurements are mostly presented in the form of continuous curves. The notion of these tempo curves is dangerous, despite its widespread use, because it lulls its users into the false impression that a continuous concept of temporal flow has an independent existence, a musical or psychological reality, and that time can be perceived independent of events carrying it. But if one bases a trans...

  6. Investigating the Implications of a Variable RBE on Proton Dose Fractionation Across a Clinical Pencil Beam Scanned Spread-Out Bragg Peak

    OpenAIRE

    Marshall, Thomas; Chaudhary, Pankaj; Michaelidesova, Anna; Vachelova, Jana; Davidkova, Marie; Vondracek, Vladimir; SCHETTINO, Giuseppe; Prise, Kevin

    2016-01-01

    Purpose: To investigate the clinical implications of a variable relative biological effectiveness (RBE) on proton dose fractionation. Using acute exposures, the current clinical adoption of a generic, constant cell killing RBE has been shown to underestimate the effect of the sharp increase in linear energy transfer (LET) in the distal regions of the spread-out Bragg peak (SOBP). However, experimental data for the impact of dose fractionation in such scenarios are still limited.Methods and Ma...

  7. Approximation by planar elastic curves

    DEFF Research Database (Denmark)

    Brander, David; Gravesen, Jens; Nørbjerg, Toke Bjerge

    2015-01-01

    We give an algorithm for approximating a given plane curve segment by a planar elastic curve. The method depends on an analytic representation of the space of elastic curve segments, together with a geometric method for obtaining a good initial guess for the approximating curve. A gradient......-driven optimization is then used to find the approximating elastic curve....

  8. Biological effectiveness of antiproton annihilation

    CERN Document Server

    Holzscheiter, Michael H.; Bassler, Niels; Beyer, Gerd; De Marco, John J.; Doser, Michael; Ichioka, Toshiyasu; Iwamoto, Keisuke S.; Knudsen, Helge V.; Landua, Rolf; Maggiore, Carl; McBride, William H.; Møller, Søren Pape; Petersen, Jorgen; Smathers, James B.; Skarsgard, Lloyd D.; Solberg, Timothy D.; Uggerhøj, Ulrik I.; Withers, H.Rodney; Vranjes, Sanja; Wong, Michelle; Wouters, Bradly G.

    2004-01-01

    We describe an experiment designed to determine whether or not the densely ionizing particles emanating from the annihilation of antiprotons produce an increase in “biological dose” in the vicinity of the narrow Bragg peak for antiprotons compared to protons. This experiment is the first direct measurement of the biological effects of antiproton annihilation. The experiment has been approved by the CERN Research Board for running at the CERN Antiproton Decelerator (AD) as AD-4/ACE (Antiproton Cell Experiment) and has begun data taking in June of 2003. The background, description and the current status of the experiment are given.

  9. Ionoacoustic characterization of the proton Bragg peak with submillimeter accuracy

    Energy Technology Data Exchange (ETDEWEB)

    Assmann, W., E-mail: walter.assmann@lmu.de; Reinhardt, S.; Lehrack, S.; Edlich, A.; Thirolf, P. G.; Parodi, K. [Department for Medical Physics, Ludwig-Maximilians-Universität München, Am Coulombwall 1, Garching 85748 (Germany); Kellnberger, S.; Omar, M.; Ntziachristos, V. [Institute for Biological and Medical Imaging, Technische Universität München and Helmholtz Zentrum München, Ingolstädter Landstrasse 1, Neuherberg 85764 (Germany); Moser, M.; Dollinger, G. [Institute for Applied Physics and Measurement Technology, Universität der Bundeswehr, Werner-Heisenberg-Weg 39, Neubiberg 85577 (Germany)

    2015-02-15

    Purpose: Range verification in ion beam therapy relies to date on nuclear imaging techniques which require complex and costly detector systems. A different approach is the detection of thermoacoustic signals that are generated due to localized energy loss of ion beams in tissue (ionoacoustics). Aim of this work was to study experimentally the achievable position resolution of ionoacoustics under idealized conditions using high frequency ultrasonic transducers and a specifically selected probing beam. Methods: A water phantom was irradiated by a pulsed 20 MeV proton beam with varying pulse intensity and length. The acoustic signal of single proton pulses was measured by different PZT-based ultrasound detectors (3.5 and 10 MHz central frequencies). The proton dose distribution in water was calculated by Geant4 and used as input for simulation of the generated acoustic wave by the matlab toolbox k-WAVE. Results: In measurements from this study, a clear signal of the Bragg peak was observed for an energy deposition as low as 10{sup 12} eV. The signal amplitude showed a linear increase with particle number per pulse and thus, dose. Bragg peak position measurements were reproducible within ±30 μm and agreed with Geant4 simulations to better than 100 μm. The ionoacoustic signal pattern allowed for a detailed analysis of the Bragg peak and could be well reproduced by k-WAVE simulations. Conclusions: The authors have studied the ionoacoustic signal of the Bragg peak in experiments using a 20 MeV proton beam with its correspondingly localized energy deposition, demonstrating submillimeter position resolution and providing a deep insight in the correlation between the acoustic signal and Bragg peak shape. These results, together with earlier experiments and new simulations (including the results in this study) at higher energies, suggest ionoacoustics as a technique for range verification in particle therapy at locations, where the tumor can be localized by ultrasound

  10. Moduli of Trigonal Curves

    CERN Document Server

    Stankova-Frenkel, Z E

    1997-01-01

    We study the moduli of trigonal curves. We establish the exact upper bound of ${36(g+1)}/(5g+1)$ for the slope of trigonal fibrations. Here, the slope of any fibration $X\\to B$ of stable curves with smooth general member is the ratio Hodge class $\\lambda$ on the moduli space $\\bar{\\mathfrak{M}}_g$ to the base $B$. We associate to a trigonal family $X$ a canonical rank two vector bundle $V$, and show that for Bogomolov-semistable $V$ the slope satisfies the stronger inequality ${\\delta_B}/{\\lambda_B}\\leq 7+{6}/{g}$. We further describe the rational Picard group of the {trigonal} locus $\\bar{\\mathfrak T}_g$ in the moduli space $\\bar{\\mathfrak{M}}_g$ of genus $g$ curves. In the even genus case, we interpret the above Bogomolov semistability condition in terms of the so-called Maroni divisor in $\\bar{\\mathfrak T}_g$.

  11. Improved Phase-Mask Fabrication of Fiber Bragg Gratings

    Science.gov (United States)

    Grant, Joseph; Wang, Ying; Sharma, Anup

    2004-01-01

    An improved method of fabrication of Bragg gratings in optical fibers combines the best features of two prior methods: one that involves the use of a phase mask and one that involves interference between the two coherent laser beams. The improved method affords flexibility for tailoring Bragg wavelengths and bandwidths over wide ranges. A Bragg grating in an optical fiber is a periodic longitudinal variation in the index of refraction of the fiber core. The spatial period (Bragg wavelength) is chosen to obtain enhanced reflection of light of a given wavelength that would otherwise propagate relatively unimpeded along the core. Optionally, the spatial period of the index modulation can be made to vary gradually along the grating (such a grating is said to be chirped ) in order to obtain enhanced reflection across a wavelength band, the width of which is determined by the difference between the maximum and minimum Bragg wavelengths. In the present method as in both prior methods, a Bragg grating is formed by exposing an optical fiber to an ultraviolet-light interference field. The Bragg grating coincides with the pattern of exposure of the fiber core to ultraviolet light; in other words, the Bragg grating coincides with the interference fringes. Hence, the problem of tailoring the Bragg wavelength and bandwidth is largely one of tailoring the interference pattern and the placement of the fiber in the interference pattern. In the prior two-beam interferometric method, a single laser beam is split into two beams, which are subsequently recombined to produce an interference pattern at the location of an optical fiber. In the prior phase-mask method, a phase mask is used to diffract a laser beam mainly into two first orders, the interference between which creates the pattern to which an optical fiber is exposed. The prior two-beam interferometric method offers the advantage that the period of the interference pattern can be adjusted to produce gratings over a wide range

  12. Curved electromagnetic missiles

    International Nuclear Information System (INIS)

    Transient electromagnetic fields can exhibit interesting behavior in the limit of great distances from their sources. In situations of finite total radiated energy, the energy reaching a distant receiver can decrease with distance much more slowly than the usual r-2. Cases of such slow decrease have been referred to as electromagnetic missiles. All of the wide variety of known missiles propagate in essentially straight lines. A sketch is presented here of a missile that can follow a path that is strongly curved. An example of a curved electromagnetic missile is explicitly constructed and some of its properties are discussed. References to details available elsewhere are given

  13. Power Curve Measurements, REWS

    DEFF Research Database (Denmark)

    Villanueva, Héctor; Gómez Arranz, Paula

    This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the...... reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis and...

  14. Fermions in curved space

    Energy Technology Data Exchange (ETDEWEB)

    Lippoldt, Stefan; Gies, Holger [Theoretisch-Physikalisches Institut, Jena (Germany)

    2013-07-01

    The Dirac equation gives rise to the Clifford algebra for the Dirac γ matrices, which holds also in curved spacetime. This algebra is invariant under diffeomorphisms as well as local spin base transformations SL(4,C). It is shown that there exists a formalism due to A. Weldon in which the necessary covariant derivative can be constructed from the γ matrices itself without recourse to a vierbein construction. The well-known vierbein formalism is included as a special gauge choice for the γ matrices. We use this formalism to study symmetry breaking transitions of fermion systems on curved space.

  15. Paths of algebraic hyperbolic curves

    Institute of Scientific and Technical Information of China (English)

    Ya-juan LI; Li-zheng LU; Guo-zhao WANG

    2008-01-01

    Cubic algebraic hyperbolic (AH) Bezier curves and AH spline curves are defined with a positive parameter α in the space spanned by {1, t, sinht, cosht}. Modifying the value of α yields a family of AH Bezier or spline curves with the family parameter α. For a fixed point on the original curve, it will move on a defined curve called "path of AH curve" (AH Bezier and AH spline curves) when α changes. We describe the geometric effects of the paths and give a method to specify a curve passing through a given point.

  16. Andreev-Bragg Reflection from an Amperian Superconductor

    Science.gov (United States)

    Baireuther, P.; Hyart, T.; Tarasinski, B.; Beenakker, C. W. J.

    2015-08-01

    We show how an electrical measurement can detect the pairing of electrons on the same side of the Fermi surface (Amperian pairing), recently proposed by Patrick Lee for the pseudogap phase of high-Tc cuprate superconductors. Bragg scattering from the pair-density wave introduces odd multiples of 2 kF momentum shifts when an electron incident from a normal metal is Andreev reflected as a hole. These Andreev-Bragg reflections can be detected in a three-terminal device, containing a ballistic Y junction between normal leads (1, 2) and the superconductor. The cross-conductance d I1/d V2 has the opposite sign for Amperian pairing than it has either in the normal state or for the usual BCS pairing.

  17. Bragg-peak spectroscopy of low-energy heavy ions

    International Nuclear Information System (INIS)

    A small axial ionization chamber with the electric field lines parallel to the particle trajectory (Bragg ionization chamber) allowing the determination of the nuclear charge and the energy of low energetic low mass heavy ions (E/A approximately 0.8 - 2.0 MeV/amu) is presented together with an adapted shaping amplifier. Using the usual technique of pulse shaping with a long and a short time constant the energy and the Bragg peak resolutions for projectiles between 24He and 1632S were determined. With commercially available low purity n-pentane purified from water and oxygene by a threefold destillation an energy resolution of ΔE/E = 1% and a charge resolving power of Z/ΔZ = 47 are attainable for 41.4 MeV 28Si ions elastically scattered from 197Au. No significant pulse height defect is observable for the energy determination of particles with Z <= 17. (author)

  18. Magneto-Optic Field Coupling in Optical Fiber Bragg Gratings

    Science.gov (United States)

    Carman, Gregory P. (Inventor); Emmons, Michael C. (Inventor); Richards, William Lance (Inventor); Mohanchandra, Panduranga K. (Inventor)

    2016-01-01

    The invention is a magneto-optic coupled magnetic sensor that comprises a standard optical fiber Bragg grating system. The system includes an optical fiber with at least one Bragg grating therein. The optical fiber has at least an inner core and a cladding that surrounds the inner core. The optical fiber is part of an optical system that includes an interrogation device that provides a light wave through the optical fiber and a system to determine the change in the index of refraction of the optical fiber. The cladding of the optical fiber comprises at least a portion of which is made up of ferromagnetic particles so that the ferromagnetic particles are subject to the light wave provided by the interrogation system. When a magnetic field is present, the ferromagnetic particles change the optical properties of the sensor directly.

  19. Self-aligned Coupled Waveguide Distributed Bragg Reflector Lasers

    Institute of Scientific and Technical Information of China (English)

    LIU Guoli; WANG Wei; ZHU Hongliang; ZHANG Jingyuan; HU Xiaohua; LU Yu; ZHANG Jing

    2002-01-01

    A novel self-aligned coupled waveguide (SACW) multi-quantum-well (MQW) distributed Bragg reflector (DBR) laser is proposed and demonstrated for the first time. By selectively removing the MQW layer and leaving the low SCH/SACW layer the Bragg grating is partially formed on this layer. By optimizing the thickness of the low SCH/SACW layer, a~80% coupling efficiency between the MQW gain region and the passive region are obtained. The typical threshold current of the SACW DBR laser is 39 mA, the slope efficiency can reach to 0.2 mW/mA and the output power is more than 20 mW with a more than 30dB side mode suppression ratio.

  20. Processing of Signals from Fiber Bragg Gratings Using Unbalanced Interferometers

    Science.gov (United States)

    Adamovsky, Grigory; Juergens, Jeff; Floyd, Bertram

    2005-01-01

    Fiber Bragg gratings (FBG) have become preferred sensory structures in fiber optic sensing system. High sensitivity, embedability, and multiplexing capabilities make FBGs superior to other sensor configurations. The main feature of FBGs is that they respond in the wavelength domain with the wavelength of the returned signal as the indicator of the measured parameter. The wavelength is then converted to optical intensity by a photodetector to detect corresponding changes in intensity. This wavelength-to-intensity conversion is a crucial part in any FBG-based sensing system. Among the various types of wavelength-to-intensity converters, unbalanced interferometers are especially attractive because of their small weight and volume, lack of moving parts, easy integration, and good stability. In this paper we investigate the applicability of unbalanced interferometers to analyze signals reflected from Bragg gratings. Analytical and experimental data are presented.

  1. Investigations on birefringence effects in polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Hu, Xiaolian; Saez-Rodriguez, D.; Bang, Ole;

    2014-01-01

    Step-index polymer optical fiber Bragg gratings (POFBGs) and microstructured polymer optical fiber Bragg gratings (mPOFBGs) present several attractive features, especially for sensing purposes. In comparison to FBGs written in silica fibers, they are more sensitive to temperature and pressure...... because of the larger thermo-optic coefficient and smaller Young's modulus of polymer materials. (M)POFBGs are most often photowritten in poly(methylmethacrylate) (PMMA) materials using a continuous-wave 325 nm HeCd laser. For the first time to the best of our knowledge, we study photoinduced...... birefringence effects in (m)POFBGs. To achieve this, highly reflective gratings were inscribed with the phase mask technique. They were then monitored in transmission with polarized light. For this, (m)POF sections a few cm in length containing the gratings were glued to angled silica fibers. Polarization...

  2. Andreev-Bragg Reflection from an Amperian Superconductor.

    Science.gov (United States)

    Baireuther, P; Hyart, T; Tarasinski, B; Beenakker, C W J

    2015-08-28

    We show how an electrical measurement can detect the pairing of electrons on the same side of the Fermi surface (Amperian pairing), recently proposed by Patrick Lee for the pseudogap phase of high-Tc cuprate superconductors. Bragg scattering from the pair-density wave introduces odd multiples of 2k(F) momentum shifts when an electron incident from a normal metal is Andreev reflected as a hole. These Andreev-Bragg reflections can be detected in a three-terminal device, containing a ballistic Y junction between normal leads (1, 2) and the superconductor. The cross-conductance dI1/dV2 has the opposite sign for Amperian pairing than it has either in the normal state or for the usual BCS pairing. PMID:26371674

  3. Planar Bragg Grating Sensors—Fabrication and Applications: A Review

    Directory of Open Access Journals (Sweden)

    I. J. G. Sparrow

    2009-01-01

    Full Text Available We discuss the background and technology of planar Bragg grating sensors, reviewing their development and describing the latest developments. The physical operating principles are discussed, relating device operation to user requirements. Recent performance of such devices includes a planar Bragg grating sensor design which allows refractive index resolution of 1.9×10−6 RIU and temperature resolution of 0.03∘C. This sensor design is incorporated into industrialised applications allowing the sensor to be used for real time sensing in intrinsically safe, high-pressure pipelines, or for insertion probe applications such as fermentation. Initial data demonstrating the ability to identify solvents and monitor long term industrial processes is presented. A brief review of the technology used to fabricate the sensors is given along with examples of the flexibility afforded by the technique.

  4. Fiber Bragg grating strain sensors for marine engineering

    Science.gov (United States)

    Wang, Tingting; Yuan, Zilin; Gong, Yuan; Wu, Yu; Rao, Yunjiang; Wei, Lili; Guo, Peng; Wang, Junpu; Wan, Fu

    2013-09-01

    For the health monitoring of the offshore drilling platform in the salt-fog environment, three nonmetallic materials, i.e., silica, FR-4 epoxy board and sheet molding compound (SMC), with the good anti-corrosion ability were chosen as the packaging materials for the fiber Bragg grating (FBG) strain sensors. By selecting a highly sensitive structure of the fiber Bragg grating strain sensor, the performances of the sensors with three materials were investigated both numerically and experimentally. The strain sensitivities were 3.76 pm/μɛ, 3.02 pm/μɛ and 3.03 pm/μɛ, respectively. The linearity was better than 0.998. It provides useful information for developing sensors for the marine engineering.

  5. Photonic crystal distributed feedback fiber lasers with Bragg gratings

    DEFF Research Database (Denmark)

    Søndergaard, Thomas

    2000-01-01

    Two new types of optical fibers, where air-holes are running down their length, are considered for making fiber lasers with Bragg gratings. The mode areas for pump and signal in these fiber lasers may be either larger or smaller compared to the corresponding mode areas for fiber lasers based on...... standard step index fibers. This makes possible realization of fiber lasers with a low pump threshold (small mode area), and fiber lasers suitable for high-power applications (large mode area)...

  6. DESIGN AND SIMULATION OF FIBER BRAGG GRATING BASED SENSORS

    OpenAIRE

    MOHAMED M. SALEH; RIADH K. A. Al-ANI; ILHAM K. ONEES

    2014-01-01

    In this paper the temperature and strain sensing principle of FBG based sensors are design & simulated by using Optigrating software. Simulation tools provide valuable help in optimizing the design parameters.From the graphical simulations, it can be concluded that there is a linear relationship between the Bragg wavelength shift and the temperature as well as the strain change. Also different values of grating period due to increasing the value of shifted wavelength.

  7. Simulation of Novel Tunable Nonlinear Chirped Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-min; YU Zhong-yuan; ZHANG Xiao-guang; YU Li; YANG Bo-jun

    2003-01-01

    A novel tunable chirped fiber Bragg grating technology is proposed and simulated numerically by Matlab. If we adhere a uniform fiber grating with super magnetostrictive film and expose them in a non-uniform magnetic field, the period of the grating can be changed with the strain imposed on it by the magnetostrictive effect .The chirped characteristics can be tuned by changing the magnetic filed which is very flexible in designing.

  8. Trial analysis of swine's periodontal ligament with Bragg grating sensors

    Science.gov (United States)

    Menegotto, G. F.; Grabarski, L.; Kalinowski, H. J.; Simões, J. A.

    2009-10-01

    In this work it is reported the measurement of the differential strain between the dental and bone tissues under effect of an applied load. Slices of swine mandible, containing the premolar tooth, are cut and measured in fresh condition. The strain is measured using fibre Bragg grating sensors glued to both tissues. In the measured range the results show a linear behaviour and confirm the importance of the periodontal ligament in the load transfer mechanism.

  9. Bragg optics computer codes for neutron scattering instrument design

    Energy Technology Data Exchange (ETDEWEB)

    Popovici, M.; Yelon, W.B.; Berliner, R.R. [Missouri Univ. Research Reactor, Columbia, MO (United States); Stoica, A.D. [Institute of Physics and Technology of Materials, Bucharest (Romania)

    1997-09-01

    Computer codes for neutron crystal spectrometer design, optimization and experiment planning are described. Phase space distributions, linewidths and absolute intensities are calculated by matrix methods in an extension of the Cooper-Nathans resolution function formalism. For modeling the Bragg reflection on bent crystals the lamellar approximation is used. Optimization is done by satisfying conditions of focusing in scattering and in real space, and by numerically maximizing figures of merit. Examples for three-axis and two-axis spectrometers are given.

  10. Large-momentum-transfer Bragg interferometer with strontium atoms

    CERN Document Server

    Mazzoni, T; Del Aguila, R; Salvi, L; Poli, N; Tino, G M

    2015-01-01

    We report on the first atom interferometer based on Bragg diffraction in a fountain of alkaline-earth atoms, namely $^{88}$Sr. We demonstrate large momentum transfer to the atoms up to eight photon recoils and the use of the interferometer as a gravimeter with a sensitivity $\\delta g/g=4\\times 10^{-8}$. Thanks to the special characteristics of strontium atoms for precision measurements, this result opens a new way for experiments in fundamental and applied physics.

  11. Boron-doped superlattices and Bragg mirrors in diamond

    OpenAIRE

    Fiori, Alexandre; Bousquet, Jessica; Eon, David; Omnès, Franck; Bellet-Amalric, E.; Bustarret, Etienne

    2014-01-01

    International audience A periodic modulation of the boron doping level of single crystal diamond multilayers over more than three orders of magnitude during epitaxial growth by microwave plasma-enhanced chemical vapor deposition is shown to yield Bragg mirrors in the visible. The thicknesses and doping level of the individual layers were controlled by in situ spectroscopic ellipsometry, enabling to tune the reflec-tance peak to the wavelength range of diamond color centers, such as NV 0 or...

  12. Fiber Bragg Gratings Embedded in 3D-Printed Scaffolds

    CERN Document Server

    Liacouras, Peter; Choudhry, Khazar; Strouse, G F; Ahmed, Zeeshan

    2015-01-01

    In recent years there has been considerable interest in utilizing embedded fiber optic based sensors for fabricating smart materials. One of the primary motivations is to provide real-time information on the structural integrity of the material so as to enable proactive actions that prevent catastrophic failure. In this preliminary study we have examined the impact of embedding on the temperature-dependent response of fiber Bragg gratings.

  13. A new generation of multilayer Bragg-Fresnel lenses

    International Nuclear Information System (INIS)

    A new type of Bragg-Fresnel multilayer lens (BFML) have been fabricated at IMT RAS and tested at LURE. The idea to combine different diffraction orders of a zone plate in one focal spot introduced by Simpson and Michette has been realized in a BFML with extended aperture. Matching of the two diffraction orders, the first and third, into one focal plane increases the output flux by a factor of two and the spatial resolution in the same order of magnitude

  14. Degradation of the Bragg peak due to inhomogeneities.

    Science.gov (United States)

    Urie, M; Goitein, M; Holley, W R; Chen, G T

    1986-01-01

    The rapid fall-off of dose at the end of range of heavy charged particle beams has the potential in therapeutic applications of sparing critical structures just distal to the target volume. Here we explored the effects of highly inhomogeneous regions on this desirable depth-dose characteristic. The proton depth-dose distribution behind a lucite-air interface parallel to the beam was bimodal, indicating the presence of two groups of protons with different residual ranges, creating a step-like depth-dose distribution at the end of range. The residual ranges became more spread out as the interface was angled at 3 degrees, and still more at 6 degrees, to the direction of the beam. A second experiment showed little significant effect on the distal depth-dose of protons having passed through a mosaic of teflon and lucite. Anatomic studies demonstrated significant effects of complex fine inhomogeneities on the end of range characteristics. Monoenergetic protons passing through the petrous ridges and mastoid air cells in the base of skull showed a dramatic degradation of the distal Bragg peak. In beams with spread out Bragg peaks passing through regions of the base of skull, the distal fall-off from 90 to 20% dose was increased from its nominal 6 to well over 32 mm. Heavy ions showed a corresponding degradation in their ends of range. In the worst case in the base of skull region, a monoenergetic neon beam showed a broadening of the full width at half maximum of the Bragg peak to over 15 mm (compared with 4 mm in a homogeneous unit density medium). A similar effect was found with carbon ions in the abdomen, where the full width at half maximum of the Bragg peak (nominally 5.5 mm) was found to be greater than 25 mm behind gas-soft-tissue interfaces. We address the implications of these data for dose computation with heavy charged particles. PMID:3952143

  15. A high sensitive fiber Bragg grating cryogenic temperature sensor

    Institute of Scientific and Technical Information of China (English)

    Kuo Li; Zhen'an Zhou; Aichun Liu

    2009-01-01

    At cryogenic temperature, a fiber Bragg grating (FBG) temperature sensor with controllable sensitivity and variable measurement range is demonstrated by using bimetal configuration. In experiments, sensitivities of -51.2, -86.4, and -520 pm/K are achieved by varying the lengths of the metals. Measurement ranges of 293 - 290.5, 283 - 280.5, and 259 - 256.5 K are achieved by shortening the distance of the gap among the metals.

  16. Underwater Acoustic Sensors Based on Fiber Bragg Gratings

    OpenAIRE

    Giuseppe Parente; Giuseppe Lanza; Armando Laudati; Michele Giordano; Andrea Cusano; Stefania Campopiano; Antonello Cutolo

    2009-01-01

    We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating) under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, sho...

  17. Measurement of sensors with fiber Bragg gratings by laser interferometer

    Czech Academy of Sciences Publication Activity Database

    Mikel, Břetislav; Čížek, Martin; Řeřucha, Šimon; Číp, Ondřej

    Budva : University of Montenegro, 2013. s. 47. [ALT´13. Annual International Conference on Advanced Laser Technologies /21./. 16.09.2013-20.09.2013, Budva] R&D Projects: GA MŠk ED0017/01/01; GA TA ČR TA01010995; GA TA ČR(CZ) TA03010835 Institutional support: RVO:68081731 Keywords : fiber Bragg sensors * laser interferometry * optical spectrum analysis * fiber sensors Subject RIV: BH - Optics, Masers, Laser s

  18. Calibration of elongation of fiber Bragg gratings by laser interferometer

    Czech Academy of Sciences Publication Activity Database

    Mikel, Břetislav; Čížek, Martin; Holík, M.; Číp, Ondřej

    Bellingham : SPIE, 2013, 89161I:1-6. ISSN 0277-786X. [International Symposium on Precision Mechanical Measurements /6./. Guiyang (CN), 10.10.2013] R&D Projects: GA MŠk ED0017/01/01; GA TA ČR TA01010995; GA TA ČR(CZ) TA03010835; GA MV VG20132015124 Institutional support: RVO:68081731 Keywords : Fiber Bragg gratings * Interferometers * Laser s * Optical fibers * Buildings Subject RIV: BH - Optics, Masers, Laser s

  19. ECM using Edwards curves

    DEFF Research Database (Denmark)

    Bernstein, Daniel J.; Birkner, Peter; Lange, Tanja;

    2013-01-01

    This paper introduces EECM-MPFQ, a fast implementation of the elliptic-curve method of factoring integers. EECM-MPFQ uses fewer modular multiplications than the well-known GMP-ECM software, takes less time than GMP-ECM, and finds more primes than GMP-ECM. The main improvements above the modular...

  20. Power Curve Measurements

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  1. Power Curve Measurements, FGW

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  2. Power curve report

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  3. Nacelle lidar power curve

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Wagner, Rozenn

    This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...

  4. Textbook Factor Demand Curves.

    Science.gov (United States)

    Davis, Joe C.

    1994-01-01

    Maintains that teachers and textbook graphics follow the same basic pattern in illustrating changes in demand curves when product prices increase. Asserts that the use of computer graphics will enable teachers to be more precise in their graphic presentation of price elasticity. (CFR)

  5. Power Curve Measurements

    DEFF Research Database (Denmark)

    Yordanova, Ginka; Vesth, Allan

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....

  6. Power Curve Measurements, FGW

    DEFF Research Database (Denmark)

    Vesth, Allan; Yordanova, Ginka

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....

  7. High frequency strain measurements with fiber Bragg grating sensors

    Science.gov (United States)

    Koch, J.; Angelmahr, M.; Schade, W.

    2015-05-01

    In recent years fiber Bragg grating sensors gained interest in structural health monitoring and concepts for smart structures. They are small, lightweight, and immune to electromagnetic interference. Using multiplexing techniques, several sensors can be addressed by a single fiber. Therefore, well-established structures and materials in industrial applications can be easily equipped with fiber optical sensors with marginal influence on their mechanical properties. In return, critical components can be monitored in real-time, leading to reduced maintenance intervals and a great reduction of costs. Beside of generally condition monitoring, the localization of failures in a structure is a desired feature of the condition monitoring system. Detecting the acoustic emission of a sudden event, its place of origin can be determined by analyzing the delay time of distributed sensor signals. To achieve high localization accuracies for the detection of cracks, breaks, and impacts high sampling rates combined with the simultaneous interrogation of several fiber Bragg grating sensors are required. In this article a fiber Bragg grating interrogator for high frequency measurements up to the megahertz range is presented. The interrogator is based on a passive wavelength to intensity conversion applying arrayed waveguide gratings. Light power fluctuations are suppressed by a differential data evaluation, leading to a reduced signal-to-noise ratio and a low strain detection limit. The measurement system is used to detect, inter alia, wire breaks in steel wire ropes for dockside cranes.

  8. Synchrotron radiation focusing by a Bragg--Fresnel lens

    International Nuclear Information System (INIS)

    Since the discovery of x rays and until the present time the possibilities of their controlling and focusing have been widely discussed. In the hard spectrum region (λ∼1 A) the main focusing schemes are the following: geometrical focusing based on incoherent interaction of wave packets reflected by different regions of bending crystals and coherent (dynamic) focusing performed at the cost of the effect of refraction index angular dispersion near the exact Bragg angle value -θB. A main disadvantage of geometrical focusing is low spatial resolution (∼0.1 mm) and temperature stability. In the case of coherent focusing a main disadvantage is a narrow angular aperture (∼10 sec. of arc) at spatial resolution (∼1--10 μm). Recently, advances in the development of diffraction physics and microstructuring technology open up possibilities for fabricating effective focusing x-ray optical elements---Bragg--Fresnel lenses (BFL)---with high spatial resolution (∼0.1 μm) at a wide angular aperture and high temperature stability. The present paper describes the main principles of Bragg--Fresnel optics (BFO). It presents the results on the synchrotron experiment and on observation of focusing. In this work the peculiarities of BFL diffraction contrast formation are investigated and image transmission using a BFL is performed. Possibilities of developing x-ray optical schemes of ultrahigh resolution on the basis of BFL elements are also discussed

  9. Maximal curves from subcovers of the GK-curve

    OpenAIRE

    Giulietti, Massimo; Quoos, Luciane; Zini, Giovanni

    2015-01-01

    For every $q=n^3$ with $n$ a prime power greater than $2$, the GK-curve is an $\\mathbb F_{q^2}$-maximal curve that is not $\\mathbb F_{q^2}$-covered by the Hermitian curve. In this paper some Galois subcovers of the GK curve are investigated. We describe explicit equations for some families of quotients of the GK-curve. New values in the spectrum of genera of $\\mathbb F_{q^2}$-maximal curves are obtained. Finally, infinitely many further examples of maximal curves that cannot be Galois covered...

  10. Wavelength-specific forward scattering of light by Bragg-reflective iridocytes in giant clams.

    Science.gov (United States)

    Ghoshal, Amitabh; Eck, Elizabeth; Gordon, Michael; Morse, Daniel E

    2016-07-01

    A surprising recent discovery revealed that the brightly reflective cells ('iridocytes') in the epithelia of giant clams actually send the majority of incident photons 'forward' into the tissue. While the intracellular Bragg reflectors in these cells are responsible for their colourful back reflection, Mie scattering produces the forward scattering, thus illuminating a dense population of endosymbiotic, photosynthetic microalgae. We now present a detailed micro-spectrophotometric characterization of the Bragg stacks in the iridocytes in live tissue to obtain the refractive index of the high-index layers (1.39 to 1.58, average 1.44 ± 0.04), the thicknesses of the high- and low-index layers (50-150 nm), and the numbers of pairs of layers (2-11) that participate in the observed spectral reflection. Based on these measurements, we performed electromagnetic simulations to better understand the optical behaviour of the iridocytes. The results open a deeper understanding of the optical behaviour of these cells, with the counterintuitive discovery that specific combinations of iridocyte diameter and Bragg-lamellar spacing can produce back reflection of the same colour that is also scattered forward, in preference to other wavelengths that are scattered at higher angles. We find for all values of size and wavelength investigated that more than 90% of the incident energy is carried by the photons that are scattered in the forward direction; while this forward scattering from each iridocyte shows very narrow angular dispersion (ca ±6°), the multiplicative scattering from a layer of ca 20 iridocytes broadens this dispersion to a cone of approximately ±90°. This understanding of the complex biophotonic dynamics enhances our comprehension of the physiologically, ecologically and evolutionarily significant light environment inside the giant clam, which is diffuse and nearly white at small tissue depths and downwelling, relatively monochromatic, and can be the same colour as

  11. Fiber Bragg grating sensors: a market overview

    Science.gov (United States)

    Méndez, A.

    2007-07-01

    Over the last few years, optical fiber sensors have seen increased acceptance and widespread use. Among the multitude of sensor types, FBG based sensors, more than any other particular sensor type, have become widely known and popular. Given their intrinsic capability to measure a multitude of parameters such as strain, temperature, pressure, chemical and biological agents - and many others - coupled with their flexibility of design to be used as single point or multi-point sensing arrays and their relative low cost, make of FBGs ideal devices to be adopted for a multitude of different sensing applications and implemented in different fields and industries. However, some technical hurdles and market barriers need to be overcome in order for this technology - and fiber sensors in general - to gain more commercial momentum and achieve faster market growth such as the need for industry standards on FBGs and FBG-based sensors, adequate packaging designs, as well as training and education of prospective customers and end-users.

  12. A Method to Discriminate Strain and Temperature in Fiber Bragg Grating Sensors

    OpenAIRE

    Chalapati, Madhan T; Pattnaik, PK; Selvarajan, A; T. Srinivas

    2005-01-01

    A significant limitation to the applications of fiber Bragg gratings (FBG) sensors is the sensitivity of the Bragg wavelength to both temperature and strain, complicating the independent measurement of these paremeters. In this letter, we explore a new method to discriminate strain and temperature in FBG sensors, which utilises the additioanl wavelength dependent phase introduced by Fiber Bragg grating written on sensing arm of Mach Zehnder Interferometer (MZI). The intensity variations of th...

  13. Spectral characteristics of draw-tower step-chirped fiber Bragg gratings

    Science.gov (United States)

    Idrisov, Ravil F.; Varzhel, Sergey V.; Kulikov, Andrey V.; Meshkovskiy, Igor K.; Rothhardt, Manfred; Becker, Martin; Schuster, Kay; Bartelt, Hartmut

    2016-06-01

    This paper presents research results on the spectral properties of step-chirped fiber Bragg grating arrays written during the fiber drawing process into a birefringent optical fiber with an elliptical stress cladding. The dependences of resonance shift of the step-chirped fiber Bragg grating on bending, on applied tensile stress and on temperature have been investigated. A usage of such step-chirped fiber Bragg gratings in fiber-optic sensing elements creation has been considered.

  14. SPECTRAL CHARACTERISTIC OF UNIFORM FIBER BRAGG GRATING USING COUPLE MODE THEORY

    Directory of Open Access Journals (Sweden)

    JYOTSNA RANI MAHAPATRA, MANISHA CHATTOPADHYAY

    2013-08-01

    Full Text Available This paper presents spectral characteristic of Fiber Bragg Grating. Here the modeling and simulation of an optical fiber Bragg grating for reflectivity based on coupled mode theory is discussed in details. Grating length represent as one of the important parameters in contributing to a high performance Fiber Bragg Grating. The reflection spectrum is analyzed with different parameters like wavelength, grating lengths and induced index change

  15. Factorization with genus 2 curves

    OpenAIRE

    Cosset, Romain

    2009-01-01

    International audience The elliptic curve method (ECM) is one of the best factorization methods available. It is possible to use hyperelliptic curves instead of elliptic curves but it is in theory slower. We use special hyperelliptic curves and Kummer surfaces to reduce the complexity of the algorithm. Our implementation GMP-HECM is faster than GMP-ECM for factoring large numbers.

  16. Surface growth kinematics via local curve evolution

    KAUST Repository

    Moulton, Derek E.

    2012-11-18

    A mathematical framework is developed to model the kinematics of surface growth for objects that can be generated by evolving a curve in space, such as seashells and horns. Growth is dictated by a growth velocity vector field defined at every point on a generating curve. A local orthonormal basis is attached to each point of the generating curve and the velocity field is given in terms of the local coordinate directions, leading to a fully local and elegant mathematical structure. Several examples of increasing complexity are provided, and we demonstrate how biologically relevant structures such as logarithmic shells and horns emerge as analytical solutions of the kinematics equations with a small number of parameters that can be linked to the underlying growth process. Direct access to cell tracks and local orientation enables for connections to be made to the underlying growth process. © 2012 Springer-Verlag Berlin Heidelberg.

  17. Neutron beam instruments at the Bragg Institute, phase 2

    International Nuclear Information System (INIS)

    Full text: On 12 May 2009, the Minister for Innovation, Industry, Science and Research announced funding for the NBI2 Program as part of the Super Science - Future Industry initiative. The budget for the NBI2 Program is $37 million and it is scheduled to be completed within four years (1 July 2009 - 30 June 2013). The project builds on the previous successful Neutron Beam Instruments Project (2000-2007), which funded the original suite of 8 instruments, along with 2 subsequent instruments funded in other ways. NBI2 will feature a new split cold neutron guide (CG-2) with two end positions, three new instruments (a second small-angle neutron scattering machine, a high-resolution back-scattering spectrometer and a neutron radiography/tomography/imaging station) along with a substantial suite of sample-environment apparatus. On 27-28 August 2009, the Bragg Institute organised a NBI2 scoping workshop in which the key parameters of the new neutron instruments, guides and sample environments were defined [1]. The case for a second SANS machine rests on the overwhelming interest and demand from the domestic community in soft matter, structural biology, materials science, magnetism and superconductivity. A second SANS instrument will have many similarities with QUOKKA but it will be geared towards excelling in measuring a wider range of object sizes simultaneously, i.e. within a single experimental setting, enabled by a time-of-flight operation mode. This is very important for kinetic measurements, which is an emerging technique and essential in various science areas. Another key design feature will be the development of sophisticated sample environment techniques such as high magnetic fields and polarisation analysis along with the appropriate data analysis methods. The back-scattering spectrometer will open up spectroscopic studies at lower energies (longer times) than on the Pelican time-of-flight spectrometer, doubling the dynamic range in energy that can be accessed at

  18. Managing curved canals

    Directory of Open Access Journals (Sweden)

    Iram Ansari

    2012-01-01

    Full Text Available Dilaceration is the result of a developmental anomaly in which there has been an abrupt change in the axial inclination between the crown and the root of a tooth. Dilaceration can be seen in both the permanent and deciduous dentitions, and is more commonly found in posterior teeth and in maxilla. Periapical radiographs are the most appropriate way to diagnose the presence of root dilacerations. The controlled regularly tapered preparation of the curved canals is the ultimate challenge in endodontics. Careful and meticulous technique will yield a safe and sufficient enlargement of the curved canals. This article gives a review of the literature and three interesting case reports of root dilacerations.

  19. Carbon Lorenz Curves

    Energy Technology Data Exchange (ETDEWEB)

    Groot, L. [Utrecht University, Utrecht School of Economics, Janskerkhof 12, 3512 BL Utrecht (Netherlands)

    2008-11-15

    The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across countries. These tools allow policy-makers and the general public to grasp at a single glance the impact of conventional distribution rules such as equal caps or grandfathering, or more sophisticated ones, on the distribution of greenhouse gas emissions. Second, using the Samuelson rule for the optimal provision of a public good, the Pareto-optimal distribution of carbon emissions is compared with the distribution that follows if countries follow Nash-Cournot abatement strategies. It is shown that the Pareto-optimal distribution under the Samuelson rule can be approximated by the equal cap division, represented by the diagonal in the Lorenz curve diagram.

  20. Dynamics of curved fronts

    CERN Document Server

    Pelce, Pierre

    1989-01-01

    In recent years, much progress has been made in the understanding of interface dynamics of various systems: hydrodynamics, crystal growth, chemical reactions, and combustion. Dynamics of Curved Fronts is an important contribution to this field and will be an indispensable reference work for researchers and graduate students in physics, applied mathematics, and chemical engineering. The book consist of a 100 page introduction by the editor and 33 seminal articles from various disciplines.

  1. Strings in curved space

    International Nuclear Information System (INIS)

    Some issues related to the vacuum geometry of strings are raised and discussed. In particular, we stress the role of conformal and Weyl invariance as a consistency requirement for formulating string dynamics in curved space. The case of the compact group is discussed in some detail. The current algebra representation which is obtained is equivalent to the Frenkel-Kac construction for the k=1 level of the Kac-Moody algebra. (author)

  2. The parasite clearance curve

    OpenAIRE

    White NJ

    2011-01-01

    Abstract Parasite clearance rates are important measures of anti-malarial drug efficacy. They are particularly important in the assessment of artemisinin resistance. The slope of the log-linear segment in the middle of the parasite clearance curve has the least inter-individual variance and is the focus of therapeutic assessment. The factors affecting parasite clearance are reviewed. Methods of presentation and the approaches to analysis are discussed.

  3. Quantization on Curves

    OpenAIRE

    Fronsdal, Christian; Kontsevich, Maxim

    2005-01-01

    Deformation quantization on varieties with singularities offers perspectives that are not found on manifolds. Essential deformations are classified by the Harrison component of Hochschild cohomology, that vanishes on smooth manifolds and reflects information about singularities. The Harrison 2-cochains are symmetric and are interpreted in terms of abelian $*$-products. This paper begins a study of abelian quantization on plane curves over $\\Crm$, being algebraic varieties of the form R2/I whe...

  4. Growth curve models and statistical diagnostics

    CERN Document Server

    Pan, Jian-Xin

    2002-01-01

    Growth-curve models are generalized multivariate analysis-of-variance models. These models are especially useful for investigating growth problems on short times in economics, biology, medical research, and epidemiology. This book systematically introduces the theory of the GCM with particular emphasis on their multivariate statistical diagnostics, which are based mainly on recent developments made by the authors and their collaborators. The authors provide complete proofs of theorems as well as practical data sets and MATLAB code.

  5. Smarandache curves according to Sabban frame of fixed pole curve belonging to the Bertrand curves pair

    Science.gov (United States)

    Şenyurt, Süleyman; Altun, Yasin; Cevahir, Ceyda

    2016-04-01

    In this paper, we investigate the Smarandache curves according to Sabban frame of fixed pole curve which drawn by the unit Darboux vector of the Bertrand partner curve. Some results have been obtained. These results were expressed as the depends Bertrand curve.

  6. Magnetic hysteresis of an artificial square ice studied by in-plane Bragg x-ray resonant magnetic scattering

    Directory of Open Access Journals (Sweden)

    J. P. Morgan

    2012-06-01

    Full Text Available We report X-ray resonant magnetic scattering studies of a Permalloy artificial square ice nanomagnet array, focussing on the field-driven evolution of the sum Σ and difference Δ signals of left and right handed circularly polarized synchrotron X-rays at different lateral positions in reciprocal space Qx. We used X-rays tuned to the Fe L3 resonance energy, with the scattering plane aligned along a principal symmetry axis of the array. Details of the specular Δ hysteresis curve are discussed, following the system magnetization from an initial demagnetized state. The periodic structure gives rise to distinct peaks at in-plane reciprocal Bragg positions, as shown by fitting Σ(Qx to a model based on a simple unit cell structure. Diffraction order-dependent hysteresis in Δ is observed, indicative of the reordering of magnetization on the system's two interpenetrating sublattices, which markedly deviates from an ideal Ising picture under strong applied fields.

  7. Bulk strains in Si induced by thickness mode ultrasonic waves and analysed with x-ray Bragg diffraction

    International Nuclear Information System (INIS)

    In-depth thickness mode ultrasonic deformations were monitored by hard (22 keV) x-ray diffraction in Bragg geometry on a Si (1 1 1) crystal. The ultrasonic thickness mode standing wave was applied with a PZT transducer coupled to the Si crystal. Measurements were taken on the time-integrated mode and also at different phases of the ultrasonic excitation in stroboscopic mode. In-depth (2 mm) x-ray stroboscopic measurements on Si showed dynamical strains that were enough to set the crystal out of the diffraction condition. This opens new possibilities for applications such as a stroboscopic gradient x-ray monochromator made out of Si at back-diffraction geometry and stress-strain curve determination of crystals

  8. Minimal Genus One Curves

    OpenAIRE

    Sadek, Mohammad

    2010-01-01

    In this paper we consider genus one equations of degree $n$, namely a (generalised) binary quartic when $n=2$, a ternary cubic when $n=3$, and a pair of quaternary quadrics when $n=4$. A new definition for the minimality of genus one equations of degree $n$ over local fields is introduced. The advantage of this definition is that it does not depend on invariant theory of genus one curves. We prove that this definition coincides with the classical definition of minimality for all $n\\le4$. As a...

  9. Application of Fiber Bragg Grating for Determining Positions of Gas Absorption Lines

    Institute of Scientific and Technical Information of China (English)

    HAN Wennian; WANG Yan; MA Feng; LIU Kun; JIA Dagong; LIU Tiegen; ZHANG Hongxia

    2010-01-01

    Fiber Bragg grating(FBG)is used as a wavelength reference device to calibrate the position of gas absorption peak in the intracavity absorption gas sensor(ICAGS)based on erbium-doped fiberring laser.This system can detect both the reflectance spectrum of FBGs and absorption spectrum of measured gas during a single wavelength sweeping process by linearly varying the driving voltage of optic filter.The voltages corresponding to center wavelength positions of four FBGs in the spectrum are determined through Gaussian peak fitting.Then,the wavelengths of gas absorption lines are deduced from the correspondence between driving voltage and wavelength obtained by quadratic curve fitting.The maximum error of wavelength of acetylene absorption lines between experimental results and those from HITRAN database is 0.106 nm and the resolving accuracy of two adjacent absorption lines is about93.593%.By using this method,ICAGS can theoretically recognize the measured gas type and monitor multi-gas components.

  10. Fiber Bragg grating based sensor for measuring temperature of in vivo lesion

    Science.gov (United States)

    Mao, Xianhui; Niu, Chunhui; Lu, Yong

    2011-05-01

    Because of the heat-resistant difference between the cancer cell and the normal cell, the normal cell can resistant higher temperature than cancer cell does. Clinical experiments showed that microwave or ultrasonic can effectively cure cancer. But since there is strong electromagnetic interference, the conventional temperature sensor will find itself hard to get the accurate temperature. So it is necessary to find a feasible sensor to measure the temperature. Fiber optic grating (FBG) sensor is excellent candidate for measuring temperature of in vivo lesion. In this paper, the investigation on the application of an optical fiber sensor in the field of biomedical engineering was introduced. The main objective of our investigation has been to develop a novel senor based on FBG to measure the temperature of in vivo lesion. Based on the Bragg equation, the temperature sensing properties of fiber optic grating was studied and the affection of central wavelength on the FBG sensing sensitivities have also been analyzed. In order to reduce the error of the FBG sensors system, it is necessary to adopt a good demodulation algorithm to calculate peak wavelength. An experimental system was set up which to test feasibility of the sensor. Among some of the peak detection algorithms, tested by experimental measuring system, the peak detection method by the Gaussian nonlinear curve fitting was finally adopted and the test results showed that the temperature measuring system based on the FBG was in the accuracy of 0.1°C.

  11. Underwater Acoustic Sensors Based on Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Giuseppe Parente

    2009-06-01

    Full Text Available We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, showing that the sensitivity is not influenced by the shape but by the transversal dimension and the material characteristics of the coating.

  12. Weldable fibre Bragg grating sensors for steel bridge monitoring

    International Nuclear Information System (INIS)

    For applications related to the structural health monitoring of steel bridges, novel weldable strain and temperature sensors based on fibre Bragg gratings were developed. These sensors, which can be directly welded to metallic structures, reveal linear responses over typical required measurement ranges and stability over thousands of load and temperature cycles. Proper installation procedures and in-field mechanical protection were also developed and implemented. The significance of the developed sensors was demonstrated through the installation of a complete sensing network on a new circular pedestrian bridge in Aveiro, Portugal, where it was used for loading tests, and also for in-service monitoring of its structural health

  13. Application of the Transmission Bragg Gratings for Vibration Monitoring

    CERN Document Server

    Tikhonov, E A

    2010-01-01

    It is shown that the optical-electronic system consisted of the transmission Bragg grating, a laser and the intermediate sensitive to the vibrations mirror can detect the vibrations, when touched by them laser beam scan will exceed the angular divergence of the beam. The mathematical model of the sensor of the vibrations presented in the form of Taylor series describes the system response taking into account the operating point, in particular, describes the effect of the doubling of the modulation frequency response relative to the frequency of acting vibrations.

  14. On-Chip Silicon Waveguide Bragg Grating Photonic Temperature Sensor

    CERN Document Server

    Klimov, Nikolai N; Berger, Michaela; Ahmed, Zeeshan

    2015-01-01

    Resistance thermometry is a time-tested method for taking temperature measurements. In recent years fundamental limits to resistance-based approaches spurred considerable interest in developing photonic temperature sensors as a viable alternative. In this study we demonstrate that our photonic thermometer, which consists of a silicon waveguide integrated with a Bragg grating, can be used to measure temperature changes over the range from 5 C to 160 C with a combined expanded uncertainty [k = 2 ; 95% confidence level] of 1.25 degree C. The computational modeling of the sensor predicts the resonance wavelength and effective refractive index within 4% of the measured value.

  15. Bragg-Berry mirrors: reflective broadband q-plates

    CERN Document Server

    Rafayelyan, Mushegh

    2016-01-01

    We report on the experimental realization of flat mirrors enabling the broadband generation of optical vortices upon reflection. The effect is based on the geometric Berry phase associated with the circular Bragg reflection phenomenon from chiral uniaxial media. We show the reflective optical vortex generation from both diffractive and nondiffractive paraxial light beams using spatially patterned chiral liquid crystal films. The intrinsic spectrally broadband character of spin-orbit generation of optical phase singularities is demonstrated over the full visible domain. Our results do not rely on any birefringent retardation requirement and consequently foster the development of a novel generation of robust optical elements for spin-orbit photonic technologies.

  16. Reannealed Fiber Bragg Gratings Demonstrated High Repeatability in Temperature Measurements

    Science.gov (United States)

    Adamovsky, Grigory; Juergens, Jeffrey R.

    2004-01-01

    Fiber Bragg gratings (FBGs) are formed by periodic variations of the refractive index of an optical fiber. These periodic variations allow an FBG to act as an embedded optical filter, passing the majority of light propagating through a fiber while reflecting back a narrow band of the incident light. The peak reflected wavelength of the FBG is known as the Bragg wavelength. Since the period and width of the refractive index variation in the fiber determines the wavelengths that are transmitted and reflected by the grating, any force acting on the fiber that alters the physical structure of the grating will change the wavelengths that are transmitted and reflected by it. Both thermal and mechanical forces acting on the grating will alter its physical characteristics, allowing the FBG sensor to detect both the temperature variations and the physical stresses and strains placed upon it. This ability to sense multiple physical forces makes the FBG a versatile sensor. To assess the feasibility of using Bragg gratings as temperature sensors for propulsion applications, researchers at the NASA Glenn Research Center evaluated the performance of Bragg gratings at elevated temperatures for up to 300 C. For these purposes, commercially available polyimide-coated high-temperature gratings were used that were annealed by the manufacturer to 300 C. To assure the most thermally stable gratings at the operating temperatures, we reannealed the gratings to 400 C at a very slow rate for 12 to 24 hr until their reflected optical powers were stabilized. The reannealed gratings were then subjected to periodic thermal cycling from room temperature to 300 C, and their peak reflected wavelengths were monitored. The setup shown is used for reannealing and thermal cycling the FBGs. Signals from the photodetectors and the spectrum analyzer were fed into a computer equipped with LabVIEW software. The software synchronously monitored the oven/furnace temperature and the optical spectrum analyzer

  17. OPTIMIZATION OF INTRAGRATING SENSING USING FIBER BRAGG GRATING

    OpenAIRE

    B.B.PADHY; HAFTAY ABADI GEBRU; SANDIPAN M.NALAWADE

    2011-01-01

    Linearly Chirped Fiber Bragg Gratings (FBGs) have been optimized and investigated for intragrating sensing. The side lobes have been suppressed using Gaussian apodization while maintaining the peak reflectivity and the bandwidth of the reflected signal. We have achieved a chirp rate of 0.5 to 2 nm/mm for intragrating sensing.Average thermal sensitivity of 11.55 pm/ oC is obtained which is higher than uniform FBGs. We have achieved novel characteristics of linearly chirped FBGs under the effec...

  18. OPTIMIZATION OF INTRAGRATING SENSING USING FIBER BRAGG GRATING

    Directory of Open Access Journals (Sweden)

    B.B.PADHY

    2011-01-01

    Full Text Available Linearly Chirped Fiber Bragg Gratings (FBGs have been optimized and investigated for intragrating sensing. The side lobes have been suppressed using Gaussian apodization while maintaining the peak reflectivity and the bandwidth of the reflected signal. We have achieved a chirp rate of 0.5 to 2 nm/mm for intragrating sensing.Average thermal sensitivity of 11.55 pm/ oC is obtained which is higher than uniform FBGs. We have achieved novel characteristics of linearly chirped FBGs under the effect of non-monotonic physical parameter distribution fields for excellent spectral response profile for intragrating sensing.

  19. Microfiber-Based Bragg Gratings for Sensing Applications: A Review

    Directory of Open Access Journals (Sweden)

    Jun-Long Kou

    2012-06-01

    Full Text Available Microfiber-based Bragg gratings (MFBGs are an emerging concept in ultra-small optical fiber sensors. They have attracted great attention among researchers in the fiber sensing area because of their large evanescent field and compactness. In this review, the basic techniques for the fabrication of MFBGs are introduced first. Then, the sensing properties and applications of MFBGs are discussed, including measurement of refractive index (RI, temperature, and strain/force. Finally a summary of selected MFBG sensing elements from previous literature are tabulated.

  20. Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

    CERN Document Server

    Huy, Minh Châu Phan; Dewynter, Véronique; Ferdinand, Pierre; Pagnoux, Dominique; Dussardier, Bernard; Blanc, Wilfried; 10.1109/JSEN.2008.926169

    2010-01-01

    The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\\degree C in a six-hole MOF, and the maximum sensitivity is reduced. Such passive FBG temperature compensation technique is of great interest for applications involving accurate sensing free of thermal effects.

  1. Dynamic gate algorithm for multimode fiber Bragg grating sensor systems.

    Science.gov (United States)

    Ganziy, D; Jespersen, O; Woyessa, G; Rose, B; Bang, O

    2015-06-20

    We propose a novel dynamic gate algorithm (DGA) for precise and accurate peak detection. The algorithm uses a threshold-determined detection window and center of gravity algorithm with bias compensation. We analyze the wavelength fit resolution of the DGA for different values of the signal-to-noise ratio and different peak shapes. Our simulations and experiments demonstrate that the DGA method is fast and robust with better stability and accuracy than conventional algorithms. This makes it very attractive for future implementation in sensing systems, especially based on multimode fiber Bragg gratings. PMID:26193010

  2. Underwater acoustic sensors based on fiber bragg gratings.

    Science.gov (United States)

    Campopiano, Stefania; Cutolo, Antonello; Cusano, Andrea; Giordano, Michele; Parente, Giuseppe; Lanza, Giuseppe; Laudati, Armando

    2009-01-01

    We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating) under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, showing that the sensitivity is not influenced by the shape but by the transversal dimension and the material characteristics of the coating. PMID:22408534

  3. A porous silicon Bragg grating waveguide by direct laser writing

    Energy Technology Data Exchange (ETDEWEB)

    Rea, Ilaria; Iodice, Mario; Coppola, Giuseppe; Rendina, Ivo; De Stefano, Luca [National Council of Research, Institute for Microelectronic and Microsystems, Department of Naples, Via P Castellino 111, I-80131 Naples (Italy); Marino, Antigone [Department of Physics, ' Federico II' University of Naples, Via Cinthia, I-80126 Naples (Italy)], E-mail: ilaria.rea@na.imm.cnr.it

    2008-09-10

    We have designed, fabricated and characterized a porous silicon-based Bragg grating integrated in an optical waveguide, by using a low cost and fast technique, direct laser writing. A periodic optical structure with a pitch of 10 {mu}m, resonant in the near-infrared wavelength region, has been obtained. The simulated transmission spectra, calculated by the transfer matrix method and waveguide modal computation, are in good qualitative agreement with the experimental ones. The waveguide transmission losses have been quantified as 22 dB cm{sup -1}.

  4. A porous silicon Bragg grating waveguide by direct laser writing

    International Nuclear Information System (INIS)

    We have designed, fabricated and characterized a porous silicon-based Bragg grating integrated in an optical waveguide, by using a low cost and fast technique, direct laser writing. A periodic optical structure with a pitch of 10 μm, resonant in the near-infrared wavelength region, has been obtained. The simulated transmission spectra, calculated by the transfer matrix method and waveguide modal computation, are in good qualitative agreement with the experimental ones. The waveguide transmission losses have been quantified as 22 dB cm-1

  5. Ultrafast laser inscribed fiber Bragg gratings for sensing applications

    Science.gov (United States)

    Mihailov, Stephen J.

    2016-05-01

    Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on femtosecond infrared laser-material processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This tutorial paper will present a review of some of the more recent developments.

  6. Fiber-bragg grating-loop ringdown method and apparatus

    Science.gov (United States)

    Wang, Chuji

    2008-01-29

    A device comprising a fiber grating loop ringdown (FGLRD) system of analysis is disclosed. A fiber Bragg grating (FBG) or Long-Period grating (LPG) written in a section of single mode fused silica fiber is incorporated into a fiber loop. By utilizing the wing areas of the gratings' bandwidth as a wavelength dependent attenuator of the light transmission, a fiber grating loop ringdown concept is formed. One aspect of the present invention is temperature sensing, which has been demonstrated using the disclosed device. Temperature measurements in the areas of accuracy, stability, high temperature, and dynamic range are also described.

  7. Evaluation of the relative biological effectiveness of spot-scanning proton irradiation in vitro.

    Science.gov (United States)

    Maeda, Kenichiro; Yasui, Hironobu; Matsuura, Taeko; Yamamori, Tohru; Suzuki, Motofumi; Nagane, Masaki; Nam, Jin-Min; Inanami, Osamu; Shirato, Hiroki

    2016-06-01

    Variations in relative biological effectiveness (RBE) from a fixed value of 1.1 are critical in proton beam therapy. To date, studies estimating RBE at multiple positions relative to the spread-out Bragg peak (SOBP) have been predominantly performed using passive scattering methods, and limited data are available for spot-scanning beams. Thus, to investigate the RBE of spot-scanning beams, Chinese hamster fibroblast V79 cells were irradiated using the beam line at the Hokkaido University Hospital Proton Therapy Center. Cells were placed at six different depths, including the entrance of the proton beam and the proximal and distal part of the SOBP. Surviving cell fractions were analyzed using colony formation assay, and cell survival curves were obtained by the curve fitted using a linear-quadratic model. RBE10 and RBE37 were 1.15 and 1.21 at the center of the SOBP, respectively. In contrast, the distal region showed higher RBE values (1.50 for RBE10 and 1.85 for RBE37). These results are in line with those of previous studies conducted using passive scattering proton beams. Taken together, these data strongly suggest that variations in RBE should be considered during treatment planning for spot-scanning beams as well as for passive scattering proton beams. PMID:26838131

  8. Optical Properties of High Sensitivity Fiber Bragg Grating on Temperature Sensor

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In this paper, the spectrum shift properties of the center reflection wavelength detected to be based on the FBG sensor with ambient temperature change. The basic theoretical methods and numerical simulation for the spectral properties of uniform Bragg grating is analyzed by using coupling mode theory which is optical properties of high sensitivity fiber Bragg grating on temperature sensor in accordance with experiment.

  9. Numerical Simulation of Bragg Reflection Based on Linear Waves Propagation over A Series of Rectangular Seabed

    Institute of Scientific and Technical Information of China (English)

    Chih-Chung WEN; Li-Hung TSAI

    2008-01-01

    A numerical model, Evolution Equation of Mild-Slope Equation (EEMSE) developed by Hsu et al. (2003), was applied to study the Bragg reflection of water waves over a series of rectangular seabed. Three key parameters of the Bragg reflection including the peak coefficient of primary Bragg reflection, its corresponding relative wavelength, and the bandwidth, have shown to be effective in describing the characteristics of the primary Bragg reflection. The characteristics of the Bragg reflection were investigated under the various conditions comprising number, height, and spacing interval of a series of rectangular seabed. The results reveal that the peak of Bragg reflection increases with the increase of rectangular seabed height and number, the bandwidth and the shift value of the Bragg reflection depend on the increase of the rectangular seabed height as well as the decrease of rectangular seabed number, and the relative rectangular seabed spacing in the rang of 3 and 4 could produce higher Bragg reflection. Finally, a correlative and regressive analysis is performed by use of the calculated data. Based on the results of the analysis, empirical equations were established. Our study results can provide an appropriate choice of a series of rectangular seabed field for a practical design.

  10. Modulation of Transmission Spectra of Anodized Alumina Membrane Distributed Bragg Reflector by Controlling Anodization Temperature

    OpenAIRE

    Zheng WenJun; Fei GuangTao; Wang Biao; Zhang Li

    2009-01-01

    Abstract We have successfully prepared anodized alumina membrane distributed Bragg reflector (DBR) using electrochemical anodization method. The transmission peak of this distributed Bragg reflector could be easily and effectively modulated to cover almost any wavelength range of the whole visible spectrum by adjusting anodization temperature.

  11. Modulation of Transmission Spectra of Anodized Alumina Membrane Distributed Bragg Reflector by Controlling Anodization Temperature

    Directory of Open Access Journals (Sweden)

    Zheng WenJun

    2009-01-01

    Full Text Available Abstract We have successfully prepared anodized alumina membrane distributed Bragg reflector (DBR using electrochemical anodization method. The transmission peak of this distributed Bragg reflector could be easily and effectively modulated to cover almost any wavelength range of the whole visible spectrum by adjusting anodization temperature.

  12. Imaging of an undulator source by phase circular Bragg-Fresnel lenses

    OpenAIRE

    Hartman, Ya.; Tarazona, E; Elleaume, P.; Snigireva, I.; Snigirev, A.

    1994-01-01

    Focusing properties and heatload resistance of a Bragg-Fresnel lens placed in an undulator beam have been demonstrated. The electron beam at an undulator source has been imaged by two setups using Bragg-Fresnel lenses. The first setup is a two-lenses telescope and the second one consists of one circular BFL and an asymmetrically cut crystal.

  13. Imaging of an undulator source by phase circular Bragg-Fresnel lenses

    International Nuclear Information System (INIS)

    Focusing properties and heatload resistance of a Bragg-Fresnel lens placed in an undulator beam have been demonstrated. The electron beam at an undulator source has been imaged by two setups using Bragg-Fresnel lenses. The first setup is a two-lenses telescope and the second one consists of one circular BFL and an asymmetrically cut crystal. (orig.)

  14. Fabrication of the Long Bragg Grating by Excimer Laser Micro Machining with High-Precision Positioning XXY Platform

    OpenAIRE

    Jian-Zhong Wu; Jian-Cin Chao; Jui-Yi Hu; Chia-Chin Chiang

    2014-01-01

    With the advancement of technology, the application of fiber Bragg grating is widely used as a Bragg grating sensor. Fiber Bragg grating is fabrication using excimer laser machining with the phase masker. The grating length is decided by the width of laser beam. In this paper, we proposed fabrication of the long Bragg grating by excimer Laser micro machining with a high-precision positioning XXY platform. The high-precision positioning XXY platform plays an important role for long FBG. It nee...

  15. Kink properties on curved manifold

    Energy Technology Data Exchange (ETDEWEB)

    Dobrowolski, T., E-mail: sfdobrow@cyf-kr.edu.p [Institute of Physics UP, Podchorazych 2, 30-084 Cracow (Poland)

    2009-10-12

    In the framework of the two-dimensional field model the influence of the curvature on kink width is discussed. Breading of the kink width in a curved region of the manifold is observed. Examples of kinks on curved manifolds are studied analytically and numerically as well. The deformation of the kink front in the form of the travelling waves propagating along the curved surfaces are found. Enlarging of the travelling wave speed in a curved regions of the manifold is predicted.

  16. On Quadratric Rotational Curved Surface

    Institute of Scientific and Technical Information of China (English)

    马国强; 朱振兴

    1993-01-01

    In this paper,a deterministic theorem is proposed for quadratic rotational curved surface.The relationship between invariants for quadratic rotational curved xurface is established.In addition we give each type of equitions for rotaional curved surface using the invariant.

  17. Unwrapping Closed Timelike Curves

    CERN Document Server

    Slobodov, Sergei

    2008-01-01

    Closed timelike curves (CTCs) appear in many solutions of the Einstein equation, even with reasonable matter sources. These solutions appear to violate causality and so are considered problematic. Since CTCs reflect the global properties of a spacetime, one can attempt to change its topology, without changing its geometry, in such a way that the former CTCs are no longer closed in the new spacetime. This procedure is informally known as unwrapping. However, changes in global identifications tend to lead to local effects, and unwrapping is no exception, as it introduces a special kind of singularity, called quasi-regular. This "unwrapping" singularity is similar to the string singularities. We give two examples of unwrapping of essentially 2+1 dimensional spacetimes with CTCs, the Gott spacetime and the Godel universe. We show that the unwrapped Gott spacetime, while singular, is at least devoid of CTCs. In contrast, the unwrapped Godel spacetime still contains CTCs through every point. A "multiple unwrapping"...

  18. Muscular condition monitoring system using fiber bragg grating sensors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Heon Young; Lee, Jin Hyuk; Kim, Dae Hyun [Seoul National University of Technology, Seoul (Korea, Republic of)

    2014-10-15

    Fiber optic sensors (FOS) have advantages such as electromagnetic interference (EMI) immunity, corrosion resistance and multiplexing capability. For these reasons, they are widely used in various condition monitoring systems (CMS). This study investigated a muscular condition monitoring system using fiber optic sensors (FOS). Generally, sensors for monitoring the condition of the human body are based on electro-magnetic devices. However, such an electrical system has several weaknesses, including the potential for electro-magnetic interference and distortion. Fiber Bragg grating (FBG) sensors overcome these weaknesses, along with simplifying the devices and increasing user convenience. To measure the level of muscle contraction and relaxation, which indicates the muscle condition, a belt-shaped FBG sensor module that makes it possible to monitor the movement of muscles in the radial and circumferential directions was fabricated in this study. In addition, a uniaxial tensile test was carried out in order to evaluate the applicability of this FBG sensor module. Based on the experimental results, a relationship was observed between the tensile stress and Bragg wavelength of the FBG sensors, which revealed the possibility of fabricating a muscular condition monitoring system based on FBG sensors.

  19. A simple Bragg detector design for AMS and IBA applications

    Science.gov (United States)

    Müller, Arnold Milenko; Döbeli, Max; Seiler, Martin; Synal, Hans-Arno

    2015-08-01

    A new compact Bragg type gas ionization chamber (GIC) has been built for use as particle counter in AMS and IBA applications. The detector stands out due to its simple concept, which does not include a Frisch grid. Test experiments have been performed with ions in the mass range from He to Th and energies ranging from 30 keV to 2.5 MeV, in order to find optimal measurement conditions and to characterize the detector performance. For projectiles heavier than Al at energies below 2.5 MeV the obtained energy resolution is comparable with that of a state-of-the-art GIC with Frisch grid and clearly outperforms solid state detectors. Additionally the operation of this simplified Bragg GIC in the electron multiplication mode was investigated for the first time, which allows the detection of radiocarbon ions at energies below 50 keV with an energy resolution of the order of 10 keV.

  20. Muscular condition monitoring system using fiber bragg grating sensors

    International Nuclear Information System (INIS)

    Fiber optic sensors (FOS) have advantages such as electromagnetic interference (EMI) immunity, corrosion resistance and multiplexing capability. For these reasons, they are widely used in various condition monitoring systems (CMS). This study investigated a muscular condition monitoring system using fiber optic sensors (FOS). Generally, sensors for monitoring the condition of the human body are based on electro-magnetic devices. However, such an electrical system has several weaknesses, including the potential for electro-magnetic interference and distortion. Fiber Bragg grating (FBG) sensors overcome these weaknesses, along with simplifying the devices and increasing user convenience. To measure the level of muscle contraction and relaxation, which indicates the muscle condition, a belt-shaped FBG sensor module that makes it possible to monitor the movement of muscles in the radial and circumferential directions was fabricated in this study. In addition, a uniaxial tensile test was carried out in order to evaluate the applicability of this FBG sensor module. Based on the experimental results, a relationship was observed between the tensile stress and Bragg wavelength of the FBG sensors, which revealed the possibility of fabricating a muscular condition monitoring system based on FBG sensors.

  1. Multilayer Bragg Fresnel zone plate for coherent HHG radiation

    International Nuclear Information System (INIS)

    Coherent diffractive imaging in the (soft) X-ray regime is an emerging new lens-less X-ray microscopy technique with the future potential of molecular or even atomic resolution, because it is ultimately limited by the wavelength of the illuminating radiation and not by the imaging quality of the X-ray lens. However, this technique depends on the availability of coherent x-ray sources as well as optics for spectral filtering and focusing. We describe the development fabrication and testing of a reflective multilayer Bragg Fresnel phase zone plate for focusing coherent XUV radiation at 13 nm wavelength from a High Harmonic Generation source. This X-ray optical device serves for spectral filtering as well as sub-micron focusing of the HH spectrum in a single element for largely reduced losses. Large zone plate structures (conventional, spiral) matching the HH beam size are recorded by e-beam lithography in ultrathin HSQ e-beam resist and over-coated with a reflective Mo/Si multilayer by ion beam deposition. By accurately matching the groove depth of the diffractive structure to odd multiples of the quarter Bragg wavelength, the total diffraction efficiency can be improved by a factor of 4 theoretically compared to amplitude structures.

  2. Self-heated fiber Bragg grating sensors for cryogenic environments

    Science.gov (United States)

    Chen, Tong; Swinehart, Philip R.; Maklad, Mokhtar S.; Buric, Michael P.; Chen, Kevin P.

    2010-04-01

    Cryogenic fuels are often considered as major energy alternatives to coal and petroleum based fuels. Safe and reliable sensor networks are required for on-demand, real-time fuel management in cryogenic environments. In this paper, a new sensor design is described that enhances the low-temperature performance of fiber sensors. FBGs inscribed in high attenuation fiber (HAF) are used to absorb in-fiber power light to raise the local sensor temperature in the cryogenic environment. When in-fiber power light is turned off, FBG sensors can serve as passive sensors to gauge temperature and stress in the cryogenic system. When the in-fiber power light is turned on, the heated sensors can be used to rapidly gauge fuel level and fuel leaks. In one example, a hydrogen gas sensor is demonstrated with a palladium-coated fiber Bragg grating (FBG). The low-temperature performance of the sensor was improved by heating the gratings as much as 200 K above the ambient temperature, and hydrogen concentration well below the 4% explosion limit was measured at 123K. In a second example, an array of four aluminum coated fiber Bragg gratings was used to measure liquid level in a cryogenic environment.

  3. A simple Bragg detector design for AMS and IBA applications

    International Nuclear Information System (INIS)

    A new compact Bragg type gas ionization chamber (GIC) has been built for use as particle counter in AMS and IBA applications. The detector stands out due to its simple concept, which does not include a Frisch grid. Test experiments have been performed with ions in the mass range from He to Th and energies ranging from 30 keV to 2.5 MeV, in order to find optimal measurement conditions and to characterize the detector performance. For projectiles heavier than Al at energies below 2.5 MeV the obtained energy resolution is comparable with that of a state-of-the-art GIC with Frisch grid and clearly outperforms solid state detectors. Additionally the operation of this simplified Bragg GIC in the electron multiplication mode was investigated for the first time, which allows the detection of radiocarbon ions at energies below 50 keV with an energy resolution of the order of 10 keV

  4. Neutron structural biology

    Energy Technology Data Exchange (ETDEWEB)

    Niimura, Nobuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Neutron diffraction provides an experimental method of directly locating hydrogen atoms in protein which play important roles in physiological functions. However, there are relatively few examples of neutron crystallography in biology since it takes a lot of time to collect a sufficient number of Bragg reflections due to the low flux of neutrons illuminating the sample. In order to overcome the flux problem, we have successfully developed the neutron IP, where the neutron converter, {sup 6}Li or Gd, was mixed with a photostimulated luminescence material on flexible plastic support. Neutron Laue diffraction 2A data from tetragonal lysozyme were collected for 10 days with neutron imaging plates, and 960 hydrogen atoms in the molecule and 157 bound water molecules were identified. These results explain the proposed hydrolysis mechanism of the sugar by the lysozyme molecule and that lysozyme is less active at pH7.0. (author)

  5. Curved-Duct

    Directory of Open Access Journals (Sweden)

    Je Hyun Baekt

    2000-01-01

    Full Text Available A numerical study is conducted on the fully-developed laminar flow of an incompressible viscous fluid in a square duct rotating about a perpendicular axis to the axial direction of the duct. At the straight duct, the rotation produces vortices due to the Coriolis force. Generally two vortex cells are formed and the axial velocity distribution is distorted by the effect of this Coriolis force. When a convective force is weak, two counter-rotating vortices are shown with a quasi-parabolic axial velocity profile for weak rotation rates. As the rotation rate increases, the axial velocity on the vertical centreline of the duct begins to flatten and the location of vorticity center is moved near to wall by the effect of the Coriolis force. When the convective inertia force is strong, a double-vortex secondary flow appears in the transverse planes of the duct for weak rotation rates but as the speed of rotation increases the secondary flow is shown to split into an asymmetric configuration of four counter-rotating vortices. If the rotation rates are increased further, the secondary flow restabilizes to a slightly asymmetric double-vortex configuration. Also, a numerical study is conducted on the laminar flow of an incompressible viscous fluid in a 90°-bend square duct that rotates about axis parallel to the axial direction of the inlet. At a 90°-bend square duct, the feature of flow by the effect of a Coriolis force and a centrifugal force, namely a secondary flow by the centrifugal force in the curved region and the Coriolis force in the downstream region, is shown since the centrifugal force in curved region and the Coriolis force in downstream region are dominant respectively.

  6. A Journey Between Two Curves

    Directory of Open Access Journals (Sweden)

    Sergey A. Cherkis

    2007-03-01

    Full Text Available A typical solution of an integrable system is described in terms of a holomorphic curve and a line bundle over it. The curve provides the action variables while the time evolution is a linear flow on the curve's Jacobian. Even though the system of Nahm equations is closely related to the Hitchin system, the curves appearing in these two cases have very different nature. The former can be described in terms of some classical scattering problem while the latter provides a solution to some Seiberg-Witten gauge theory. This note identifies the setup in which one can formulate the question of relating the two curves.

  7. Designing a ridge filter based on a mouse foot skin reaction to spread out Bragg-peaks for carbon-ion radiotherapy

    International Nuclear Information System (INIS)

    Background and purpose: Carbon-ion radiotherapy uses spread-out Bragg peaks (SOBP) to produce uniform biological effects within a target volume. The relative biological effectiveness is determined by the in vitro cell kill after a single dose is employed to design the SOBP. A question remains as to whether biological effects for in vivo tissues after fractionated doses are also uniform within the SOBP. Material and methods: Mouse foot skin was irradiated with fractionated doses of carbon ions at various linear energy transfer (LET) values. A new ridge filter was designed based on alpha and beta values for each LET to cause moderate skin reaction, and was studied concerning its uniformity. Results: The reciprocal total doses of intermediate-LET carbon ions and of reference gamma rays linearly increased with an increase of a dose per fraction in Fe-plots. As the single total dose of higher LET run off linearity, data obtained from 2 to 6 fractions were used to design a new ridge filter. The physical dose distribution of the new ridge filter was almost identical to, and indistinguishable from, the ridge filter designed based on the in vitro cell kill. Conclusions: The LET dependence of alpha is a principle of the biological factor to be used for designing spread-out Bragg peaks of carbon-ion radiotherapy

  8. Calculating Variations in Biological Effectiveness for a 62 MeV Proton Beam.

    Science.gov (United States)

    Carante, Mario Pietro; Ballarini, Francesca

    2016-01-01

    A biophysical model of radiation-induced cell death and chromosome aberrations [called BIophysical ANalysis of Cell death and chromosome Aberrations (BIANCA)] was further developed and applied to therapeutic protons. The model assumes a pivotal role of DNA cluster damage, which can lead to clonogenic cell death following three main steps: (i) a DNA "cluster lesion" (CL) produces two independent chromosome fragments; (ii) fragment mis-rejoining within a threshold distance d gives rise to chromosome aberrations; (iii) certain aberration types (dicentrics, rings, and large deletions) lead to clonogenic inactivation. The yield of CLs and the probability, f, that a chromosome fragment remains un-rejoined even if other fragment(s) are present within d, were adjustable parameters. The model, implemented as a MC code providing simulated dose-responses directly comparable with experimental data, was applied to pristine and modulated Bragg peaks of the proton beam used to treat eye melanoma at INFN-LNS in Catania, Italy. Experimental survival curves for AG01522 cells exposed to the Catania beam were reproduced, supporting the model assumptions. Furthermore, cell death and chromosome aberrations at different depths along a spread-out Bragg peak (SOBP) dose profile were predicted. Both endpoints showed an increase along the plateau, and high levels of damage were found also beyond the distal dose fall-off, due to low-energy protons. Cell death and chromosome aberrations were also predicted for V79 cells, in the same irradiation scenario as that used for AG01522 cells. In line with other studies, this work indicated that assuming a constant relative biological effectiveness (RBE) along a proton SOBP may be sub-optimal. Furthermore, it provided qualitative and quantitative evaluations of the dependence of the beam effectiveness on the considered endpoint and dose. More generally, this work represents an example of therapeutic beam characterization avoiding the use of

  9. Calculating Variations in Biological Effectiveness for a 62 MeV Proton Beam

    Science.gov (United States)

    Carante, Mario Pietro; Ballarini, Francesca

    2016-01-01

    A biophysical model of radiation-induced cell death and chromosome aberrations [called BIophysical ANalysis of Cell death and chromosome Aberrations (BIANCA)] was further developed and applied to therapeutic protons. The model assumes a pivotal role of DNA cluster damage, which can lead to clonogenic cell death following three main steps: (i) a DNA “cluster lesion” (CL) produces two independent chromosome fragments; (ii) fragment mis-rejoining within a threshold distance d gives rise to chromosome aberrations; (iii) certain aberration types (dicentrics, rings, and large deletions) lead to clonogenic inactivation. The yield of CLs and the probability, f, that a chromosome fragment remains un-rejoined even if other fragment(s) are present within d, were adjustable parameters. The model, implemented as a MC code providing simulated dose–responses directly comparable with experimental data, was applied to pristine and modulated Bragg peaks of the proton beam used to treat eye melanoma at INFN-LNS in Catania, Italy. Experimental survival curves for AG01522 cells exposed to the Catania beam were reproduced, supporting the model assumptions. Furthermore, cell death and chromosome aberrations at different depths along a spread-out Bragg peak (SOBP) dose profile were predicted. Both endpoints showed an increase along the plateau, and high levels of damage were found also beyond the distal dose fall-off, due to low-energy protons. Cell death and chromosome aberrations were also predicted for V79 cells, in the same irradiation scenario as that used for AG01522 cells. In line with other studies, this work indicated that assuming a constant relative biological effectiveness (RBE) along a proton SOBP may be sub-optimal. Furthermore, it provided qualitative and quantitative evaluations of the dependence of the beam effectiveness on the considered endpoint and dose. More generally, this work represents an example of therapeutic beam characterization avoiding the use of

  10. Birational maps that send biquadratic curves to biquadratic curves

    International Nuclear Information System (INIS)

    Recently, many papers have begun to consider so-called non-Quispel−Roberts−Thompson (QRT) birational maps of the plane. Compared to the QRT family of maps which preserve each biquadratic curve in a fibration of the plane, non-QRT maps send a biquadratic curve to another biquadratic curve belonging to the same fibration or to a biquadratic curve from a different fibration of the plane. In this communication, we give the general form of a birational map derived from a difference equation that sends a biquadratic curve to another. The necessary and sufficient condition for such a map to exist is that the discriminants of the two biquadratic curves are the same (and hence so are the j-invariants). The result allows existing examples in the literature to be better understood and allows some statements to be made concerning their generality. (fast track communication)

  11. Detecting deformations in uncompacted strata by fiber Bragg grating sensors incorporated into GFRP

    Energy Technology Data Exchange (ETDEWEB)

    Chai, J.; Liu, J.X.; Qiu, B.A.; Li, Y.; Zhu, L.; Wei, S.M.; Wang, Z.P.; Zhang, G.W.; Yang, J.H. [Xian University of Science & Technology, Xian (China). School of Energy Engineering

    2011-01-15

    Coalfields based in east China, such as Huaibei, Datun, Xuzhou, Yanzhou, Yongxia and Huainan, have suffered paroxysmal shaft lining fracture and repeated deformation after repair in the last three decades. This phenomenon has required the development of fractured shaft lining repairing technology and a method for detecting rock strata settlement. It is proposed in this paper that, with the method of fiber Bragg grating sensor incorporated into GFRP, a sensing network of fiber Bragg grating wavelength division multiplexing (WDM)/spatial division multiplexing (SDM) mixing array composed of 18 fiber gratings is formed, and it is used for monitoring the settlement of uncompacted hydrous strata. It is the first time that the fiber Bragg grating sensing system is embedded into the 180-m deep uncompacted strata, and the field experiments are conducted at No. 3 Jingning Coal Mine. The layout of optical sensors, the fiber Bragg grating detecting system, the drilling of the borehole and the embedding method of fiber Bragg grating sensors are introduced. The monitoring results of fiber Bragg grating sensors are compared with groundwater level monitoring results. Engineering practice shows that the fiber Bragg grating sensors are working normally and they can be used to detect strain safely and stably.

  12. Optimal Aging and Death:Understanding the Preston Curve

    OpenAIRE

    Dalgaard, Carl-Johan; Strulik, Holger

    2011-01-01

    The present study examines whether the Preston curve reflects a causal impact of income on longevity or, for example, factors correlated with both income and life expectancy. In order to understand the Preston curve better, we develop a model of optimal intertemporal consumption in which the representative consumer is subject to physiological aging. In modeling aging we draw on recent research in the fields of biology and medicine. The speed of the aging process, and thus the time of death, a...

  13. Grammatical evolution to design fractal curves with a given dimension

    OpenAIRE

    Ortega, Alfonso; Abu Dalhoum, Abdel Latif; Alfonseca, Manuel

    2003-01-01

    Lindenmayer grammars have frequently been applied to represent fractal curves. In this work, the ideas behind grammar evolution are used to automatically generate and evolve Lindenmayer grammars which represent fractal curves with a fractal dimension that approximates a predefined required value. For many dimensions, this is a nontrivial task to be performed manually. The procedure we propose closely parallels biological evolution because it acts through three different levels: a genotype (a ...

  14. Three dimensional biological dose distribution of antiprotons

    International Nuclear Information System (INIS)

    The goal of external beam cancer therapy is to destroy the tumour while sparing the healthy tissue around it. In hadron therapy, the dose profile of heavy charged particles satisfies this request, because most of the energy is deposited at the end of the particle path, in the Bragg peak. Antiprotons are even more promising, thanks to the extra energy released by annihilation when captured in a normal atom at the end of range. The aim of the AD-4/ACE experiment at CERN is to determine the increase in biological dose near the Bragg peak due to densely ionizing particles emanating from the annihilation of antiprotons. Initial experiments showed the damage to cells inflicted at the end of the beam for identical damage at the skin level to be four times higher for antiprotons than for protons. The radiation field in a spread-out Bragg peak produced with antiprotons is highly mixed and for proper dose planning knowledge of linear energy transfer (LET) and relative biological efficiency (RBE) at any point in the target is needed. We are studying a number of detection methods for their response to mixed radiation fields with the goal to obtain a direct measurement of the 3D LET distribution and report on first results.

  15. A fast response temperature sensor based on fiber Bragg grating

    International Nuclear Information System (INIS)

    Aimed at the requirement for a fast-response expendable ocean temperature sensor, this paper presents a new design scheme for an optic fiber sensor. Ocean temperature sensors require high sensitivity and high response speed, which must be up to milliseconds. The fiber Bragg grating (FBG) temperature sensor with high sensitivity has been declared in the last decade, but its response speed has been rarely reported. In this paper, a method is proposed which is to package an FBG with a metal tube. The response time of this sensor is 48.6 ms, which is an order of magnitude greater than that of an ordinary optical fiber temperature sensor. Temperature sensitivity is 27.6 pm/°C and the linearity is up to 0.9999. In addition, the sensor can be less than 15 mm. It offers a new way to detect ocean temperature. (paper)

  16. Humidity insensitive TOPAS polymer fiber Bragg grating sensor

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Khan, Lutul; Webb, David J.;

    2011-01-01

    We report the first experimental demonstration of a humidity insensitive polymer optical fiber Bragg grating (FBG), as well as the first FBG recorded in a TOPAS polymer optical fiber in the important low loss 850nm spectral region. For the demonstration we have fabricated FBGs with resonance...... wavelength around 850 nm and 1550 nm in single-mode microstructured polymer optical fibers made of TOPAS and the conventional poly (methyl methacrylate) (PMMA). Characterization of the FBGs shows that the TOPAS FBG is more than 50 times less sensitive to humidity than the conventional PMMA FBG in both...... wavelength regimes. This makes the TOPAS FBG very appealing for sensing applications as it appears to solve the humidity sensitivity problem suffered by the PMMA FBG....

  17. Prospects for solar axion searches with crystals via Bragg scattering

    International Nuclear Information System (INIS)

    A calculation of the expected signal due to Primakov coherent conversion of solar axions into photons via Bragg scattering in several solid-state detectors is presented and compared with present and future experimental sensitivities. The axion window ma > or approx. 0.03 eV (not accessible at present by other techniques) could be explored in the foreseeable future with crystal detectors to constrain the axion-photon coupling constant gaγγ below the latest bounds coming from helioseismology. On the contrary a positive signal in the sensitivity region of such devices would imply revisiting other more stringent astrophysical limits derived for the same range of the axion mass. The application of this technique to the COSME germanium detector which is taking data at the Canfranc Underground Laboratory leads to a 95% C.L. limit gaγγ ≤ 2.8 x 10-9 GeV-1

  18. Fiber Bragg grating strain sensor for hard rocks

    Science.gov (United States)

    Castro-Caicedo, Alvaro; Nieto-Callejas, María. J.; Torres, Pedro

    2015-09-01

    Strain is an important property to be measured in rock structures such as tunnels, slopes, dams, and mining. However, commercial surface mountable fiber Bragg grating (FBG) strain sensors are packaged in planar configuration, which is not appropriate for the irregular surface of the rocks since an unacceptable bonding layer fails to transfer the strain from the rock to the FBG. As a first approach to this problem, in this work we analyze packaged FBG sensors for cylindrical samples of hard rocks. A calibration process was carried out to evaluate the performance of the packaging and bonding layer as compared to electrical resistance strain gage methods. We show the importance of both packaging and bonding layer in FBG sensor technology for measuring strain in hard rocks.

  19. Microwave Bragg-scattering zone-axis-pattern analysis

    CERN Document Server

    Fraundorf, P; Garver, W; Freeman, M; Proctor, D

    2013-01-01

    Louis deBroglie's connection between momentum and spatial-frequency vectors is perhaps most viscerally-experienced via the real-time access that electron-diffraction provides to transverse slices of a crystal's reciprocal lattice. The classic introductory (and/or advanced) physics lab-experiment on microwave Bragg-scattering can with a bit of re-arrangement also give students access to "zone-axis-pattern" slices through the 3D spatial-frequency (i.e. reciprocal) lattice of a ball-bearing crystal. In this paper we show how data from the standard experimental set up can be used to generate zone-axis-patterns oriented down the crystal rotation-axis. This may be used to give students direct experience with crystal shape-transforms (which help to explain anomalous peaks), as well as to the complementary relation between non-Cartesian basis-vectors in direct and reciprocal (co-vector) space.

  20. Wavefront distortion optimized with volume Bragg gratings in photothermorefractive glass.

    Science.gov (United States)

    Gao, Fan; Zhang, Xiang; Sun, Xiaojie; Yuan, Xiao

    2016-03-15

    The wavefront characteristics in 2D angular filtering on the basis of two orthogonal transmitting volume Bragg gratings (VBGs) is presented. The experimental results show that middle-high frequency wavefront distortions are efficiently suppressed with VBGs. The peak-valley value of the beam at a wavelength of 1053 nm reduces from 2.075λ to 0.209λ, and the root mean square value reduces from 0.207λ to 0.041λ. The wavefront power spectrum density shows that the wavefront distribution of the beam in medium and high frequencies is corrected by the VBGs. Additionally, the far-field distribution and focusing properties of the beam are improved. The beam Strehl ratio increases from 0.43 to 0.96, and the encircled energy improves from 95% energy at 4.01 mrad to 95% energy at 1.26 mrad. PMID:26977639

  1. Fiber Bragg grating demodulation through innovative numerical procedures

    Science.gov (United States)

    Dinardo, Giuseppe; Vacca, Gaetano

    2016-01-01

    The aim of this article is to introduce an innovative algorithm for the calculation of the shift of the maximum reflectivity wavelength of a Fiber Bragg Grating experiencing an applied strain. An accurate and precise evaluation of the FBG spectrum displacement is crucial for determining the amount of the physical quantity inducing such perturbations. The proposed method is based on the Fast Fourier Transform based Cross Correlation function. Such method is compared to Least Squares Fitting (LSF) and the centroid algorithms, pointing out remarkable improvements in accuracy, precision, and time consumption performance. In addition, a further improvement of the proposed algorithm is introduced. It consists in an iteratively performed Cross Correlation algorithm. It has been proved that such improvement leads to estimations characterized by better accuracy and precision, thanks also to a considerable reduction of the peak-locking effect due to the FBG spectral resolution.

  2. Bragg diffraction and the Iron crust of Neutron Stars

    CERN Document Server

    Llanes-Estrada, Felipe J

    2009-01-01

    If neutron stars have a thin atomic crystalline-iron crust, they must diffract X-rays of appropriate wavelength. So that the diffracted beam is visible from Earth, the illuminating source must be very intense and near the reflecting star. An example is a binary system with two neutron stars, one of them inert, the other an X-ray pulsar, in close orbit. The observable to be searched for is a secondary peak added (quasi-) periodically to the main X-ray pulse. The distinguishing feature of this secondary is that it appears at wavelengths related by simple integer numbers, lambda, lambda/2, lambda/3... lambda/n because of Bragg's diffraction law.

  3. Dynamic and static strain gauge using superimposed fiber Bragg gratings

    International Nuclear Information System (INIS)

    This paper demonstrates a simple and fast interrogation method for the dynamic and/or static strain gauge using a reflection spectrum from two superimposed fiber Bragg gratings (FBGs). The superimposed FBGs are designed to decrease nonequidistant space of generated a sensing pulse train in a time domain during dynamic strain gauge. By combining centroid finding with smooth filtering methods, both the interrogation speed and accuracy are improved. A four times increase in the interrogation speed of dynamic strain, by generating a 2 kHz optical sensing pulse train from a 500 Hz scanning frequency, is demonstrated experimentally. The interrogation uncertainty and total harmonic distortion characterization of superimposed FBGs are tested and less than 4 pm standard deviation is obtained. (paper)

  4. Fiber Bragg grating (FBG) sensors used in coal mines

    Science.gov (United States)

    Wang, Jinyu; Liu, Tongyu; Song, Guangdong; Xie, Hongjing; Li, Lianqing; Deng, Xiaolin; Gong, Zhijie

    2014-06-01

    The fiber Bragg grating (FBG) strain sensors were used for on-line monitoring of the stress variation of the lined wall in the gateway retained along the goaf of No. 3203 coal mining face in Dongtan Mine. The results showed that the FBG strain sensor with the wide measuring range could measure the stress variation accurately during the support process of the gateway retained along the goaf and could provide the basis to further optimize the support structure and to determine the support plan of the gateway retained along the goaf. The FBG micro-seismic sensors were used in Xinglong Mine to detect the micro-seismic signal. The signals were well received and analyzed to determine the location and energy level of the source of the micro-seismic event warning. The FBG sensors and detecting system show a significant potential for micro-seismic detection and geological disasters detection.

  5. Contact microphone using optical fibre Bragg grating technology

    International Nuclear Information System (INIS)

    A contact microphone using optical fibre Bragg grating has been developed. It enables one to listen and record a human voice and/or breathing by monitoring the vibration generated by the outer wall of the throat during speech. This system can have many applications such as detecting defects in vocal folds, measuring and monitoring the vibration and defection generated by intubations of a patient throat and other voice related problem, low level speaking recording and transmitting is also possible, the microphone can be also used to monitor breathing and the system can be used as a microphone in very harsh environments for example it would allow one to hear the patient during a cat scan

  6. Contact microphone using optical fibre Bragg grating technology

    Energy Technology Data Exchange (ETDEWEB)

    Bezombes, F A; Lalor, M J; Burton, D R [General Engineering Research Institute (GERI), Liverpool John Moores University, James Parsons Building, Byrom Street, Liverpool (United Kingdom)

    2007-07-15

    A contact microphone using optical fibre Bragg grating has been developed. It enables one to listen and record a human voice and/or breathing by monitoring the vibration generated by the outer wall of the throat during speech. This system can have many applications such as detecting defects in vocal folds, measuring and monitoring the vibration and defection generated by intubations of a patient throat and other voice related problem, low level speaking recording and transmitting is also possible, the microphone can be also used to monitor breathing and the system can be used as a microphone in very harsh environments for example it would allow one to hear the patient during a cat scan.

  7. Research of embedded fiber Bragg grating temperature sensor system

    Science.gov (United States)

    Hu, Ji; Wan, Shengpeng; Xie, Changlin; Zhang, Zhimin; Luo, Ningning; He, Shuai

    2010-10-01

    In this article, an embedded fiber Bragg grating temperature sensor system is proposed and researched. The demodulating system controls a Piezoelectric Ceramic (PZT) with sawteeth wave to scan the matching grating, then do photoelectric conversion using a detector, and use Digital Signal Processor (DSP) to find the max intensity. Meanwhile, use PZT drive voltage to control the central wavelength of sensor grating to demodulate. Then use the USB interface chip to realize the communication between DSP and the host computer, and send the collected data to the host computer. Finally, the real time temperature can be inquired and stored through the inquiring interface programmed by computer. The result demonstrates that this experimental system has the wave addressing range from 1540 to 1565 nm and the temperature resolution of 0.1°C.

  8. Focusing properties of ellipsoidal Bragg-Fresnel multilayer lenses

    International Nuclear Information System (INIS)

    Principles of calculation of the Bragg-Fresnel multilayer lenses (BFL) structure topology and the first results of test of ellipsoidal BFL using the Sibir'-1 synchrotron radiation source are presented. The picture of cross section of the rotation ellipsoids of the equal phase surfaces by the multilayer structure under the angle to the optical axis was used as the initial model of calculation of the BFL structure. As a result of this experiment, the pictures, reduced by a factor of 350, in the region of X-ray generation with 4.5 nm wavelength are obtained; focusing properties of ellipsoidal BFL with a circular form of a focal pit are demonstrated for the first time

  9. Fibre Bragg grating based accelerometer with extended bandwidth

    Science.gov (United States)

    Basumallick, Nandini; Biswas, Palas; Chakraborty, Rajib; Chakraborty, Sushanta; Dasgupta, Kamal; Bandyopadhyay, Somnath

    2016-03-01

    We have shown experimentally that the operable bandwidth of a fibre Bragg grating (FBG) based accelerometer can be extended significantly, without compromising its sensitivity, using a post-signal processing technique which involves frequency domain weighting. It has been demonstrated that using the above technique acceleration can be correctly interpreted even when the operating frequency encroaches on the region where the frequency response of the sensor is non-uniform. Two different excitation signals, which we often encounter in structural health monitoring applications, e.g. (i) a signal composed of multi-frequency components and (ii) a sinusoidal excitation with a frequency sweep, have been considered in our experiment. The results obtained have been compared with a piezo accelerometer.

  10. Remote (250 km Fiber Bragg Grating Multiplexing System

    Directory of Open Access Journals (Sweden)

    Manuel Lopez-Amo

    2011-09-01

    Full Text Available We propose and demonstrate two ultra-long range fiber Bragg grating (FBG sensor interrogation systems. In the first approach four FBGs are located 200 km from the monitoring station and a signal to noise ratio of 20 dB is obtained. The second improved version is able to detect the four multiplexed FBGs placed 250 km away, offering a signal to noise ratio of 6–8 dB. Consequently, this last system represents the longest range FBG sensor system reported so far that includes fiber sensor multiplexing capability. Both simple systems are based on a wavelength swept laser to scan the reflection spectra of the FBGs, and they are composed by two identical-lengths optical paths: the first one intended to launch the amplified laser signal by means of Raman amplification and the other one is employed to guide the reflection signal to the reception system.

  11. Notes on Evanescent Wave Bragg-Reflection Waveguides

    CERN Document Server

    Pressl, Benedikt

    2013-01-01

    We investigate an extended version of the Bragg reflection waveguide (BRW) with air gaps as one of the layers. This design has the potential of drastically simplifying the epitaxial structure for integrated nonlinear optical elements at the expense of more complicated structuring. This approach would afford much more flexibility for designing and varying BRW structures. Here, we discuss an extension of the established theory for BRW slabs and report our results of applying Marcatili's method for rectangular waveguides to the BRW case. With this analytic approach we can estimate the effective index of the modes orders of magnitudes faster than with full numerical techniques such as finite-difference time-domain (FDTD) or finite elements. Initial results are mixed; while phase-matched designs have been found, they currently have no significant advantage over other schemes.

  12. Pure Bending Characteristic of Tilted Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Bo Liu; Yin-Ping Miao; Hai-Bin Zhou; Qi-Da Zhao

    2008-01-01

    a novel structure of the pure macro-bending sensor based on the tilted fiber Bragg grating (TFBG) is proposed. The TFBG located in the half circle with the different diameters is bent at a constant angle with respect to the tilted grating planes. With the variations of the curvature, the core-mode resonance is unchanged and the transmission power of cladding modes detected by the photodiodes varies linearly with curvature, while the ghost mode changes by the form of two-order polynomial. So we can use the transmission power of ghost mode or other cladding modes to detect bending curvature as shape sensor. From a practical point of view, the sensor proposed here is simple, low cost and easy to implement. Moreover, it is possible to make a temperature-insensitive shape sensor due to the same temperature characteristic between the core mode and the cladding modes.

  13. Femtosecond soliton diode on heterojunction Bragg-grating structure

    CERN Document Server

    Deng, Zhigui; Li, Hongji; Fu, Shenhe; Liu, Yikun; Xiang, Ying; Li, Yongyao

    2016-01-01

    We numerically propose a scheme for realizing an all-optical femtosecond soliton diode based on a tailored heterojunction Bragg grating, which is designed by two spatially asymmetric chirped cholesteric liquid crystals. Our simulations demonstrate that with the consideration of optical nonlinearity, not only the femtosecond diode effect with nonreciprocal transmission ratio up to 120 can be achieved, but also the optical pulse evolving into soliton which maintains its shape during propagation through the sample is observed. Further, the influence of pulse width and the carrier wavelength to the femtosecond diode effect is also discussed in detail. Our demonstrations might suggest a new direction for experimentally realizing the femtosecond soliton diode based on the cholesteric liquid crystals.

  14. Direct UV-written planar Bragg grating sensors

    International Nuclear Information System (INIS)

    Integrated photonics is a proven platform for physical and chemical sensing. It offers miniaturised solutions that are suited for use in extreme environments, including strong EM-fields, EM-pulses and contact with flammable materials, often far exceeding electronic sensors in this regard. This review looks into direct UV-written planar Bragg grating technology and its application to integrated photonic sensors. The platform has been demonstrated widely for measurement of physical properties such as temperature, pressure and strain. In addition, by using an evanescent interaction, refractive index can be measured allowing for chemical and biochemical detection. Further to this, the platform has recently been utilised in quantum information processing, where quantum gate operations and single photon detection has been shown. (topical review)

  15. Vibration measurement of electrical machines using integrated fibre Bragg gratings

    Science.gov (United States)

    Fabian, M.; Borg Bartolo, J.; Ams, M.; Gerada, C.; Sun, T.; Grattan, K. T. V.

    2015-09-01

    In this paper a method to track the rotating force vector set up within the air-gap of radial flux rotating electrical machines using fibre Bragg gratings is reported. The proposed technique offers the potential for simultaneous rotor speed and position monitoring. This specific sensor design, together with other FBG-based multi-parameter measurements, is aimed to create an all-optical sensor solution for electrical machines, reducing the component count of existing systems and addressing noise issues traditionally associated with electrical sensors used. In this work, an optical fibre sensor system has been successfully integrated into an off-the-shelf four-pole 11kW induction motor.

  16. Rotation Curves of Spiral Galaxies

    CERN Document Server

    Sofue, Y; SOFUE, Yoshiaki; RUBIN, Vera

    2000-01-01

    Rotation curves of spiral galaxies are the major tool for determining the distribution of mass in spiral galaxies. They provide fundamental information for understanding the dynamics, evolution and formation of spiral galaxies. We describe various methods to derive rotation curves, and review the results obtained. We discuss the basic characteristics of observed rotation curves in relation to various galaxy properties, such as Hubble type, structure, activity, and environment.

  17. Singularly perturbed phase response curves

    OpenAIRE

    Sacré, Pierre; Franci, Alessio

    2015-01-01

    In this paper we propose a novel geometric method, based on singular perturbations, to approximate isochrones of relaxation oscillators and predict the qualitative shape of their (finite) phase response curve. This approach complements the infinitesimal phase response curve approach to relaxation oscillators and overcomes its limitations near the singular limit. We illustrate the power of the methodology by deriving semi-analytic formula for the (finite) phase response curve of generic planar...

  18. Fabrication of Dual-Wavelength Fiber Bragg Grating with a Longitudinal Stretch

    Institute of Scientific and Technical Information of China (English)

    JIANG Li; ZHANG Dong-sheng; ZHANG Wei-gang; KAI Gui-yun; DONG Xiao-yi

    2006-01-01

    A method of fabricating dual-wavelength fiber Bragg grating with a uniform phase mask is demonstrated.Theoretical analysis and numerical simulation using Matrix method arc given.The moving exposing technique is adopted.Good control over the grating's reflectivity and the separation of the two Bragg wavelengths is enabled by adjusting the stretch,the length of the grating,and the exposure.A grating with two equal transmission peaks of 19.5 dB is obtained by using this method,and the separation of the two Bragg wavelengths is 0.78 nm.

  19. Bragg-case section topography of growth defects in Si : Ge crystals

    International Nuclear Information System (INIS)

    The samples cut out from Si : Ge crystals with 3% and 1.2% of germanium were studied by means of synchrotron white beam Bragg-case section and projection topography as well as conventional transmission Lang topography. The obtained topographs revealed dominant contrast coming from the segregation of germanium. The use of Bragg-case section topography made possible to follow the shape of growth surfaces inside the crystal. The formation of contrast in Bragg-case section topographs for different orientation of growth surfaces with respect to the incident beam is discussed. The applied methods enabled also revealing growth surface instabilities occurring in some regions of Si : Ge crystals

  20. Planar waveguide tilted Bragg grating refractometer fabricated through physical micromachining and direct UV writing.

    Science.gov (United States)

    Holmes, Christopher; Carpenter, Lewis G; Rogers, Helen L; Sparrow, Ian J G; Gates, James C; Smith, Peter G R

    2011-06-20

    A set of rapid prototyping techniques are combined to construct a laterally-tilted Bragg grating refractometer in a novel planar geometry. The tilted Bragg grating is fabricated in a silica-on-silicon planar substrate using a dual beam direct UV writing (DUW) technique. Lateral cladding mode confinement is subsequently achieved by physically micromachining two trenches either side of the direct UV written waveguide. The resulting device is demonstrated as an effective refractometer, displaying a comparable sensitivity to tilted Bragg gratings in a fiber optical geometry, but with the added advantages of planar integration. PMID:21716485

  1. New imaging using pulsed neutron sources imaging of crystalline structural information by Bragg edge transmission spectroscopy

    International Nuclear Information System (INIS)

    Neutron imaging at a pulsed neutron source can simultaneously give position-dependent neutron transmission spectra of a material. 'Bragg edge' transmission pattern appears at low energy region of the spectrum. Since the Bragg edge transmission spectrum includes various crystalline structural information, e.g., crystal structure, crystalline phase, crystallographic texture, crystallite size and strain, the pulsed neutron imaging using a two-dimensional area detector can non-destructively visualize such the information over the wide area of a material. In this article, principles, features and experimental examples of the Bragg edge transmission imaging that is expected as a new analysis tool for materials science are presented. (author)

  2. Biological effects

    International Nuclear Information System (INIS)

    Following an introduction into the field of cellular radiation effect considering the most important experimental results, the biological significance of the colony formation ability is brought out. The inactivation concept of stem cells does not only prove to be good, according to the present results, in the interpretation of the pathogenesis of acute radiation effects on moult tissue, it also enables chronicle radiation injuries to be interpreted through changes in the fibrous part of the organs. Radiation therapy of tumours can also be explained to a large extent by the radiation effect on the unlimited reproductiveness of tumour cells. The more or less similar dose effect curves for healthy and tumour tissue in practice lead to intermittent irradiation. The dependence of the intermittent doses and intervals on factors such as Elkind recovery, synchronisation, redistribution, reoxygenation, repopulation and regeneration are reviewed. (ORU/LH)

  3. Miniature fiber Bragg grating sensor interrogator (FBG-Transceiver) system

    Science.gov (United States)

    Mendoza, Edgar A.; Kempen, Cornelia; Lopatin, Craig

    2007-04-01

    This paper describes recent progress conducted towards the development of a miniature fiber Bragg grating sensor interrogator (FBG-Transceiver TM) system based on multi-channel integrated optic sensor (InOSense TM) microchip technology. The hybrid InOSense TM microchip technology enables the integration of all of the functionalities, both passive and active, of conventional bench top FBG sensor interrogator systems, packaged in a miniaturized, low power operation, 2-cm x 5-cm package suitable for the long-term structural health monitoring in applications where size, weight, and power are critical for operation. The FBG-Transceiver system uses active optoelectronic components monolithically integrated to the InOSense TM microchip, a microprocessor controlled signal processing electronics board capable of processing the FBG sensors signals related to stress-strain and temperature as well as vibration and acoustics. The FBG-Transceiver TM system represents a new, reliable, highly robust technology that can be used to accurately monitor the status of an array of distributed fiber optic Bragg grating sensors installed in critical infrastructures. Its miniature package, low power operation, and state-of-the-art data communications architecture, all at a very affordable price makes it a very attractive solution for a large number of SHM/NDI applications in aerospace, naval and maritime industry, civil structures like bridges, buildings and dams, the oil and chemical industry, and for homeland security applications. The miniature, cost-efficient FBG-Transceiver TM system is poised to revolutionize the field of structural health monitoring and nondestructive inspection market. The sponsor of this program is NAVAIR under a DOD SBIR contract.

  4. High-sensitivity temperature sensor based on Bragg grating in BDK-doped photosensitive polymer optical fiber

    Institute of Scientific and Technical Information of China (English)

    Xusheng Cheng; Weiwei Qiu; Wenxuan Wu; Yanhua Luo; Xiujie Tian; Qijin Zhang; Bing Zhu

    2011-01-01

    @@ A single-mode polymer optical fiber (POF) with highly photosensitive core doped with benzil dimethyl ketal (BDK) is fabricated and used for writing Bragg grating through the two-beam interference method. The Bragg wavelength of the grating is about 1570 nm, while the full-width at half-maximum (FWHM) of the reflection peak is 0.3 nm. The temperature response of POF Bragg grating is theoretically analyzed and experimentally measured in contrast to silica optical fiber Bragg grating (FBG). The result shows that the temperature character of POF Bragg grating is negative, which is opposite to the silica optical FBG. The absolute value of the temperature response of POF Bragg grating is one order of magnitude higher than that of the silica optical FBG, making POF Bragg grating appear to be very attractive for constructing temperature sensors with high resolution.%A single-mode polymer optical fiber (POF) with highly photosensitive core doped with benzil dimethyl ketal (BDK) is fabricated and used for writing Bragg grating through the two-beam interference method. The Bragg wavelength of the grating is about 1570 nm, while the full-width at half-maximum (FWHM) of the reflection peak is 0.3 nm. The temperature response of POF Bragg grating is theoretically analyzed and experimentally measured in contrast to silica optical fiber Bragg grating (FBG). The result shows that the temperature character of POF Bragg grating is negative, which is opposite to the silica optical FBG. The absolute value of the temperature response of POF Bragg grating is one order of magnitude higher than that of the silica optical FBG, making POF Bragg grating appear to be very attractive for constructing temperature sensors with high resolution.

  5. High-resolution high-efficiency X-ray imaging system based on the in-line Bragg magnifier and the Medipix detector

    Czech Academy of Sciences Publication Activity Database

    Vagovič, P.; Korytár, D.; Cecilia, A.; Hamann, E.; Švéda, L.; Pelliccia, D.; Hartwig, J.; Zápražný, Z.; Oberta, Peter; Dolbnya, I.; Shawney, K.; Flechsig, U.; Fiederle, M.; Baumbach, T.

    2013-01-01

    Roč. 20, č. 1 (2013), s. 153-159. ISSN 0909-0495. [International Workshop on X-Ray Damage to Biological Crystalline Samples /7./. Oxfordshire, 14.03.2012-16.03.2012] R&D Projects: GA MPO FR-TI1/412 Institutional support: RVO:68378271 Keywords : Bragg magnifie * germanium * holography * high resolution * in-line * X-ray imaging Subject RIV: BH - Optics, Masers, Lasers Impact factor: 3.022, year: 2013 http://onlinelibrary.wiley.com/doi/10.1107/S0909049512044366/pdf

  6. Heegner modules and elliptic curves

    CERN Document Server

    Brown, Martin L

    2004-01-01

    Heegner points on both modular curves and elliptic curves over global fields of any characteristic form the topic of this research monograph. The Heegner module of an elliptic curve is an original concept introduced in this text. The computation of the cohomology of the Heegner module is the main technical result and is applied to prove the Tate conjecture for a class of elliptic surfaces over finite fields; this conjecture is equivalent to the Birch and Swinnerton-Dyer conjecture for the corresponding elliptic curves over global fields.

  7. Quantum fields in curved space

    International Nuclear Information System (INIS)

    The book presents a comprehensive review of the subject of gravitational effects in quantum field theory. Quantum field theory in Minkowski space, quantum field theory in curved spacetime, flat spacetime examples, curved spacetime examples, stress-tensor renormalization, applications of renormalization techniques, quantum black holes and interacting fields are all discussed in detail. (U.K.)

  8. Study on Dual Bragg Wavelength Fiber Grating and Its Tuning Scheme

    Institute of Scientific and Technical Information of China (English)

    Dong Xingfa; Fu Shenggui; Zhang Hao; Kai Guiyun; Dong Xiaoyi

    2003-01-01

    Because of package, a single FBG has dual Bragg wavelength. One is sensitive to stress and the other is sensitive to temperature. By using the special mechanism, the wavelengths can be tuned by stress and temperature respectively.

  9. High Power Compact Single-Frequency Volume Bragg Er-Doped Fiber Laser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is based on successful results of Phase I project where it was shown that the use of volume Bragg gratings in PTR glass as selectors of transverse and...

  10. Impact of Saturable Gain/Loss on Bistability of Nonlinear Parity-Time Bragg Gratings

    CERN Document Server

    Phang, Sendy; Susanto, Hadi; Benson, Trevor M; Sewell, Phillip

    2014-01-01

    We report on the impact of realistic gain and loss models on the bistable operation of nonlinear parity-time Bragg gratings. In our model we include both dispersive and saturable gain and show that levels of gain/loss saturation can have significant impact on the bistable operation of a nonlinear PT Bragg grating based on GaAs material. The hysteresis of the nonlinear PT Bragg grating is analyzed for different levels of gain and loss and different saturation levels. We show that high saturation levels can improve the nonlinear operation by reducing the intensity at which the bistability occurs. However when the saturation intensity is low, saturation inhibits PT phenomena in a nonlinear PT Bragg grating.

  11. Fiber sensing system based on a bragg grating and optical time domain reflectometry

    OpenAIRE

    Chin, Sanghoon; Thévenaz, Luc

    2013-01-01

    Optic fiber sensor characterized in that the sensing fiber is provided with a continuous Bragg grating covering the entire fiber length which is dedicated to sensing and along which spatially resolved measurements are performed.

  12. Development of a Fibre Bragg Grating Sensor for Rock Deformation Monitoring

    Science.gov (United States)

    Kanopoulos, Patrick Paskalis

    This thesis examines the theoretical and experimental performance of a fibre Bragg grating sensor for static and dynamic strain measurement in hard rock. A literature review focuses on the fundamental theory of fibre Bragg gratings, various physical demodulation schemes used to interrogate Bragg sensors with an emphasis on charge coupled device spectrometry, as well as the aliasing behaviour of Bragg gratings as sensors. A coupled numerical-analytical analysis is conducted on various sensor configurations designed for borehole deployment in order to establish the response of the strain sensors under various strain conditions. The findings of an experimental investigation of two sensors subjected to uniaxial strain within a grout and a rock specimen are presented. The experimental data confirm the feasibility of using the proposed sensor as a part of an integrated optical strain sensing network.

  13. Analysis of Sampled Fiber Bragg Grating Based on the Photonic Crystal Theory

    Institute of Scientific and Technical Information of China (English)

    ZHU Dan-dan

    2009-01-01

    One of the most basic characteristics of photonic crystal is frequency band gap.When defects are introduced into the periodic photonic crystal,a number of defect modes appear in the stop band.In this paper,we exploit transfer matrix method based on photonic crystal theory,and assume the sampled fiber Bragg grating as one-dimensional dual photonic crystal with a large size defect.Characteristics of the sampled fiber Bragg grating are analyzed.Experimental results show that the sampled fiber Bragg grating has many reflective peaks.Its reflectivity,center wavelength,reflective peak intervals and band width all change with the grating parameters,including grating length,duty ratio of the material with high dielectric constant,and index modulation depth and period.Results agree with the conventional couple mode theory which can be used when analyzing other characteristics of the sampled fiber Bragg grating or applying it into practice.

  14. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    CERN Document Server

    Abbaneo, D; Abbrescia, M.; Abdelalim, A.A.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Ahmed, W.; Aleksandrov, A.; Aly, R.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F.R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M.M.; De Lentdecker, G.; De Oliveira, R.; De Robertis, G.; Dildick, S.; Dorney, B.; Elmetenawee, W.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R.M.; Hassan, A.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y.G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P.K.; Mandal, K.; Marchioro, A.; Marinov, A.; Masod, R.; Majumdar, N.; Merlin, J.A.; Mitselmakher, G.; Mohanty, A.K.; Mohamed, S.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L.M.; Paolucci, P.; Park, I.; Passeggio, G.; Passamonti, L.; Pavlov, B.; Philipps, B.; Piccolo, D.; Pierluigi, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Russo, A.; Ryu, G.; Ryu, M.S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A.H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S.K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

    2016-01-01

    A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.

  15. Trends and future of fiber Bragg grating sensing technologies: tailored draw tower gratings (DTGs)

    Science.gov (United States)

    Lindner, E.; Hartung, A.; Hoh, D.; Chojetzki, C.; Schuster, K.; Bierlich, J.; Rothhardt, M.

    2014-05-01

    Today fiber Bragg gratings are commonly used in sensing technology as well as in telecommunications. Numerous requirements must be satisfied for their application as a sensor such as the number of sensors per system, the measurement resolution and repeatability, the sensor reusability as well as the sensor costs. In addition current challenges need to be met in the near future for sensing fibers to keep and extend their marketability such as the suitability for sterilization, hydrogen darkening or the separation of strain and temperature (or pressure and temperature). In this contribution we will give an outlook about trends and future of the fiber Bragg gratings in sensing technologies. Specifically, we will discuss how the use of draw tower grating technology enables the production of tailored Bragg grating sensing fibers, and we will present a method of separating strain and temperature by the use of a single Bragg grating only, avoiding the need for additional sensors to realize the commonly applied temperature compensation.

  16. High-speed two-dimensional laser scanner based on Bragg gratings stored in photothermorefractive glass.

    Science.gov (United States)

    Yaqoob, Zahid; Arain, Muzammil A; Riza, Nabeel A

    2003-09-10

    A high-speed free-space wavelength-multiplexed optical scanner with high-speed wavelength selection coupled with narrowband volume Bragg gratings stored in photothermorefractive (PTR) glass is reported. The proposed scanner with no moving parts has a modular design with a wide angular scan range, accurate beam pointing, low scanner insertion loss, and two-dimensional beam scan capabilities. We present a complete analysis and design procedure for storing multiple tilted Bragg-grating structures in a single PTR glass volume (for normal incidence) in an optimal fashion. Because the scanner design is modular, many PTR glass volumes (each having multiple tilted Bragg-grating structures) can be stacked together, providing an efficient throughput with operations in both the visible and the infrared (IR) regions. A proof-of-concept experimental study is conducted with four Bragg gratings in independent PTR glass plates, and both visible and IR region scanner operations are demonstrated. PMID:14503693

  17. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    Science.gov (United States)

    Abbaneo, D.; Abbas, M.; Abbrescia, M.; Abdelalim, A. A.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Ahmed, W.; Aleksandrov, A.; Aly, R.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F. R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M. M.; De Lentdecker, G.; De Oliveira, R.; De Robertis, G.; Dildick, S.; Dorney, B.; Elmetenawee, W.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R. M.; Hassan, A.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y. G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P. K.; Mandal, K.; Marchioro, A.; Marinov, A.; Masod, R.; Majumdar, N.; Merlin, J. A.; Mitselmakher, G.; Mohanty, A. K.; Mohamed, S.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L. M.; Paolucci, P.; Park, I.; Passeggio, G.; Passamonti, L.; Pavlov, B.; Philipps, B.; Piccolo, D.; Pierluigi, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Russo, A.; Ryu, G.; Ryu, M. S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A. H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S. K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

    2016-07-01

    A novel approach which uses Fiber Bragg Grating (FBG) sensors has been utilized to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.

  18. NURBS curve blending using extension

    Institute of Scientific and Technical Information of China (English)

    Yong-jin LIU; Rong-qi QIU; Xiao-hui LIANG

    2009-01-01

    Curve and surface blending is an important operation in CAD systems, in which a non-uniform rational B-spline (NURBS) has been used as the de facto standard. In local comer blending, two curves intersecting at that comer are first made disjoint, and then the third blending curve is added-in to smoothly join the two curves with G1-or G2-continuity. In this paper we present a study to solve the joint problem based on curve extension. The following nice properties of this extension algorithm are exploited in depth: (1) The parameterization of the original shapes does not change; (2) No additional fragments are created.Various examples are presented to demonstrate that our solution is simple and efficient.

  19. Management of the learning curve

    DEFF Research Database (Denmark)

    Pedersen, Peter-Christian; Slepniov, Dmitrij

    2016-01-01

    dimensions of the learning process involved in a capacity expansion project and identified the direct and indirect labour influences on the production learning curve. On this basis, the study proposes solutions to managing learning curves in overseas capacity expansions. Furthermore, the paper concludes with......Purpose – This paper focuses on the management of the learning curve in overseas capacity expansions. The purpose of this paper is to unravel the direct as well as indirect influences on the learning curve and to advance the understanding of how these affect its management. Design....../methodology/approach – The paper builds on the offshoring, capacity expansion and learning curve literature. The existing scholarship often lacks detailed insights into the factors surrounding the globalisation of production, and how constructing and operationalising new capacities overseas should be implemented. The paper...

  20. Anomalous longitudinal mode hops in GaAs/AlGaAs distributed Bragg reflector lasers

    OpenAIRE

    Hofstetter, Daniel; Zappe, H. P.

    2008-01-01

    We investigate normal and anomalous longitudinal mode hops in GaAs/AlGaAs-based distributed Bragg reflector (DBR) lasers; anomalous mode hops are defined as those which move toward shorter wavelengths with increasing temperature, which is unexpected. The two-section DBR lasers discussed in this letter, consisting of a gain section and an unpumped Bragg reflector, typically exhibit one mode hop in a 10 K temperature range. Although the longer wavelength modes are expected to start lasing when ...

  1. Fiber-optical accelerometers based on polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bang, Ole;

    2010-01-01

    Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer.......Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

  2. An experimental approach to quantify strain transfer efficiency of fibre bragg grating sensors to host structures

    OpenAIRE

    C. Y. Wei; Ye, Chen-Chun; James, Stephen W.; Tatam, Ralph P.; Irving, Phil E.

    2001-01-01

    This paper developed a method to evaluate the strain transfer efficiency of fibre Bragg grating sensors to host structures. Various coatings were applied to fibre Bragg grating sensors after being fabricated. They were epoxy, silane agent and polypropylene, representing different surface properties. A neat epoxy resin plate was used as the host in which the coated fibre sensors were embedded in the central layer. The tensile strain output from the FBGs was compared with that...

  3. Uniform Fiber Bragg Grating modeling and simulation used matrix transfer method

    Directory of Open Access Journals (Sweden)

    Abdallah Ikhlef

    2012-01-01

    Full Text Available This paper presents the modeling and simulation of an optical fiber Bragg grating for maximum reflectivity, minimum side lobe. Gating length represents as one of the critical parameters in contributing to a high performance fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths .The side lobes have been suppressed using raised cosine apodization while maintaining the peak reflectivity. Such simulations are based on solving coupled mode equations by transfer matrix method.

  4. Ionoacoustic tomography of the proton Bragg peak in combination with ultrasound and optoacoustic imaging

    OpenAIRE

    Stephan Kellnberger; Walter Assmann; Sebastian Lehrack; Sabine Reinhardt; Peter Thirolf; Daniel Queirós; George Sergiadis; Günther Dollinger; Katia Parodi; Vasilis Ntziachristos

    2016-01-01

    Ions provide a more advantageous dose distribution than photons for external beam radiotherapy, due to their so-called inverse depth dose deposition and, in particular a characteristic dose maximum at their end-of-range (Bragg peak). The favorable physical interaction properties enable selective treatment of tumors while sparing surrounding healthy tissue, but optimal clinical use requires accurate monitoring of Bragg peak positioning inside tissue. We introduce ionoacoustic tomography based ...

  5. Strain and temperature sensors using multimode optical fiber Bragg gratings and correlation signal processing

    OpenAIRE

    Lim, J; Yang, QP; Jones, BE; Jackson, PR

    2002-01-01

    Multimode fiber optic Bragg grating sensors for strain and temperature measurements using correlation signal processing methods have been developed. Two multimode Bragg grating sensors were fabricated in 62/125 m graded-index silica multimode fiber; the first sensor was produced by the holographic method and the second sensor by the phase mask technique. The sensors have signal reflectivity of approximately 35% at peak wavelengths of 835 nm and 859 nm, respectively. Strain testing...

  6. A temperature insensitive Bragg grating sensor - using orthogonal polar polarisation modes for in situ temperature compensation

    OpenAIRE

    Parker, R M; J.C.Gates; Grossel, M. C.; P.G.R.Smith

    2010-01-01

    An exposed Bragg grating incorporated into a planar waveguide forms an optical device that acts as a refractive index sensor. The exposed evanescent field causes the Bragg peak to be sensitive to the refractive index of its surroundings and can be used to detect changes in this environment. The method reported is able to provide accurate temperature compensation by applying a scaling factor derived from measurement of the birefringence of the transverse electric (TE) and transverse magnetic (...

  7. Karakterisasi Fiber Bragg Grating (FBG) Untuk Pengembangan Sistem Sensor Strain Tanah

    OpenAIRE

    Sinuhaji, Depi Santi

    2010-01-01

    Fiber Bragg Grating (FBG) is a periodic change of refractive index which is the length of optical fiber. Has been developed Fiber Bragg Grating (FBG)-based laser diodes for monitoring landslide-prone areas. This sensor has been developed because high sensitivity and is not affected by electromagnetic induction that can be placed at a distance from the location where the power supply and monitor. FBG transmission peak will shift when the grating is change resulting from a change in temperature...

  8. 100 GHz electrically tunable planar Bragg gratings via liquid crystal overlay

    OpenAIRE

    Adikan, F.R.Mahamd; J.C.Gates; Snow, B.D.; Dyadyusha, A.; Major, H.E.; Gawith, C.B.E.; Kaczmarek, M.; P.G.R.Smith

    2007-01-01

    We demonstrate 114GHz electrically tunable liquid crystal Bragg gratings using 170Vpp voltage. The devices were made using direct UV grating writing and use evanescent coupling into an electrically tuned nematic liquid crystal. Reconfigurable integrated optical devices are essential in today's dense and complex telecommunication meshes. A commonly employed component on the silica platform fulfilling the above role is a planar Bragg grating. The ability to tune the reflection peak of these gra...

  9. Uniform Fiber Bragg Grating modeling and simulation used matrix transfer method

    OpenAIRE

    Abdallah Ikhlef; Rachida Hedara; Mohamed Chikh-Bled

    2012-01-01

    This paper presents the modeling and simulation of an optical fiber Bragg grating for maximum reflectivity, minimum side lobe. Gating length represents as one of the critical parameters in contributing to a high performance fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths .The side lobes have been suppressed using raised cosine apodization while maintaining the peak reflectivity. Such simulations are based on ...

  10. Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Gratings

    OpenAIRE

    Hisham K. Hisham

    2016-01-01

    The thermal dependence of the spectral response (i.e. transmission, reflection and time delay (r) responses) of uniform polymer optical fiber (POF) Bragg gratings has been investigated. In addition to the temperature dependence, the effects of grating strength (kLg) and fiber index modulation (n) have been investigated. Besides high capability of tunable wavelength due to the unique large and negative thermo-optic coefficient of POF, the spectral response for POF Bragg gratings sh...

  11. Floquet-Bloch vs. Nicolson-Ross-Weir Extraction for Magneto-Dielectric Bragg Stacks

    DEFF Research Database (Denmark)

    Clausen, Niels Christian Jerichau; Arslanagic, Samel; Breinbjerg, Olav

    We extract and compare the permittivity and permeability from a dielectric and a magnetodielectric Bragg stack with the Floquet-Bloch (FB) method for the infinite stack and the Nicolson-Ross- Weir (NRW) method for the finite stack. While the extracted propagation constants are identical, the wave...... impedances are different. Moreover, the NRWmethod yields magnetic effects for the dielectric Bragg stack, while the FB method gives the expected vacuum permeability, also in the bandgab....

  12. Fiber Bragg Gratings in Small-Core Ge-Doped Photonic Crystal Fibers

    Institute of Scientific and Technical Information of China (English)

    Yiping Wang; Hartmut Bartelt; Wolfgang Ecke; Reinhardt Willsch; Jens Kobelke; Michael Kautz; Sven Brueckner; Manfred Rothhardt

    2008-01-01

    This paper reports fiber Bragg gratings (FBGs) inscribed in a small-core Ge-doped photonic crystal fibers with a UV laser and a Talbot inter-ferometer. The responses of such FBGs to temper-ature, strain, bending, and transverse-loading were systematically investigated. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and trans-verse-loading. The bending and transverse- loading properties of the FBGs are sensitive to the fiber orientations.

  13. Efectos rotacionales en redes de Bragg en fibras ópticas

    OpenAIRE

    Arce Diego, José Luis; Muriel Fernández, Miguel Ángel; López Ruisánchez, Roberto; López Higuera, José Miguel

    1997-01-01

    The periodic mode coupling between the right and left circular polarization modes that is induced by a photoinduced fiber grating, with or without lineal birefringence, and with a magnetic field or a twist rate applied to it, is studied and analyzed through the use of the generalized coupled-mode theory. Several novel application of such devices as a fiber Bragg grating twist rate probe, a tuneable optical fiber based on twisted fiber Bragg grating, and an optical filter tuned by magnetic fie...

  14. Computer-Generated Holograms for Recording Multiple-Phase-Shifte Fiber Bragg Grating Corrugations

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new method of fabricating multiple-phase-shifte fiber Bragg grating by CGHs is proposed. The authors present an example of such CGH by which a section multiple-phase-shifte fiber Bragg grating with two π/2 phase shifts and grating length L=21.2 μm was produced. The authors describe the production process and finally give an example of a reconstructed fiber grating with two phase-shifts.

  15. Temperature sensor based on injection fiber Bragg grating laser with wavelength and temporal domain demodulation

    Science.gov (United States)

    Li, Qi; Huang, Kaiqiang; Chen, Haiyan

    2015-08-01

    A novel temperature sensor based on injection fiber Bragg grating laser with wavelength and temporal domain demodulation is proposed and demonstrated experimentally. The proof of concept device consists of a DFB laser modulated by a RF signal as injection light, a fiber Bragg grating laser, an optical spectrum analyzer, and a digital oscilloscope. The dynamic range of the proposed sensor is explored. The results demonstrate the new concept of temperature sensors and the technical feasibility for temperature measurement.

  16. Comparison of spatial harmonics in infinite and finite Bragg stacks for metamaterial homogenization

    DEFF Research Database (Denmark)

    Clausen, Niels Christian Jerichau; Arslanagic, Samel; Breinbjerg, Olav

    2014-01-01

    Metamaterial homogenization may be based on the dominance of a single Floquet-Bloch spatial harmonic in an infinite periodic structure - with the dominance quantified in terms of the relative magnitude of the associated spatial harmonic Poynting vector. For the corresponding finite structure...... of the corresponding infinite Bragg stack. This is even the case for finite Bragg stacks having only two unit cells; thus, the number of unit cells does not influence the homogenizability of this type of configuration. ©...

  17. Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Hisham K. Hisham

    2016-06-01

    Full Text Available The thermal dependence of the spectral response (i.e. transmission, reflection and time delay (r responses of uniform polymer optical fiber (POF Bragg gratings has been investigated. In addition to the temperature dependence, the effects of grating strength (kLg and fiber index modulation (n have been investigated. Besides high capability of tunable wavelength due to the unique large and negative thermo-optic coefficient of POF, the spectral response for POF Bragg gratings show high stability and larger spectrum bandwidth with temperature variation compare with the silica optical fiber (SOF Bragg gratings, especially with the increase of the kLg value. It was found that by increasing kLg, the peak reflectance value increases and the bandwidth of the Bragg reflector become narrower. Also it’s shown by increasing the kLg value, r deceasing significantly and reach its minimum value at the designed wavelength (B. Furthermore, the r for POF Bragg gratings is less than that for SOF Bragg gratings at the same value of kLg. Also it’s found that the peak reflectivity value increases to around 60% when the n value increases from 110-4 to 510-4.

  18. Bragg diffraction of fermions at optical potentials; Braggbeugung von Fermionen an optischen Potentialen

    Energy Technology Data Exchange (ETDEWEB)

    Deh, Benjamin

    2008-10-27

    This thesis describes the Bragg diffraction of ultracold fermions at an optical potential. A moving optical lattice was created, by overlaying two slightly detuned lasers. Atoms can be diffracted at this lattice if the detuning fulfills the Bragg condition for resting atoms. This Bragg diffraction is analyzed systematically in this thesis. To this end Rabi oscillations between the diffraction states were driven, as well in the weakly interacting Bragg regime, as in the strongly interacting Kapitza-Dirac regime. Simulations, based on a driven two-, respectively multilevel-system describe the observed effects rather well. Furthermore, the temporal evolution of the diffracted states in the magnetic trapping potential was studied. The anharmonicity of the trap in use and the scattering cross section for p-wave collisions in a {sup 6}Li system was determined from the movement of these states. Moreover the momentum distribution of the fermions was measured with Bragg spectroscopy and first signs of Fermi degeneracy were found. Finally an interferometer with fermions was build, exhibiting a coherence time of more than 100 {mu}s. With this, the possibility for measurement and manipulation of ultracold fermions with Bragg diffraction could bee shown. (orig.)

  19. Formularization and simulation of Bragg selectivity of readout signals in angular-multiplexing holographic data storage.

    Science.gov (United States)

    Ide, Tatsuro

    2016-04-01

    Bragg selectivity of readout signals in angular-multiplexing holographic data storage was investigated. The effects of degrading factors, namely, volume change, refractive-index change, and positional change (tilt and rotation) of a hologram, and the effects of compensating variables, namely, wavelength shift and reference-beam-angle shift, on Bragg selectivity were evaluated. Deviation of wave vectors of recovered pixels of a hologram from the Bragg condition under degrading factors and compensating variables, namely, Bragg mismatch, Δσ, was mathematically derived. Approximating Δσ by using the first-order Maclaurin series with respect to degrading factors and compensating variables revealed their effects on Bragg selectivity. The extent to which wavelength and angle of reference beam should be shifted to compensate for the degrading factors were determined. Then, readout images were simulated under multiple degrading factors and compensating variables. These simulated images were found to agree well with the experimentally obtained ones, which reveals the validity of the formalization of Bragg selectivity. PMID:27139671

  20. The Functionality of Fiber Bragg Grating Sensor Compared to that of Foil Gauge

    Directory of Open Access Journals (Sweden)

    Bashir A. Tahir

    2005-01-01

    Full Text Available Technology such as Fiber Bragg Grating (FBG sensors are widely accepted in almost all industries. FBG are being investigated for their applicability in other markets such as smart structures. Fiber optic sensors can also be used in many different applications. Fiber optic sensors are available in several types; among them, the Bragg grating sensor is being studied in this research. For this research work, the main focus was the use of fiber Bragg grating sensors for measuring strain. The key objective of this research; to determine the functionality of fiber Bragg grating sensors compared to that of conventional foil gauges. Fiber Bragg grating sensors were chosen for this research because they have a high potential for various uses in the monitoring of smart structures. The major incentives for this type of research are the current deterioration of civil structures in west Malaysia. The laboratory tests are being reported in this research work including tests of steel straps and an aluminum test specimen. In all the tests, strain was measured using the fiber Bragg grating sensors and compared to values from a conventional foil gauge. The results are being discussed in details. It was inferred that the use of fiber optic technology for the monitoring of civil structures is very promising and the future is sure to bring further advancements and improvements.

  1. Development of Bragg Gratings as Shear Stress Monitors in Aerodynamic >Facilities

    Science.gov (United States)

    Parmar, Devandra S.

    1998-04-01

    Two Bragg gratings centered at 1289.565 nm and 1299.432 nm were co-written in the core of a 9/125 telecommunications fiber doped with 10 weight percent germanium. The fiber was mounted in a 126 deep groove, with a 127 diameter semicircular bottom, etched in a flat metal plate used as the test model. A 1 thick epoxy layer bonded the fiber to the metal plate. A thermocouple was also attached to the metal plate in the vicinity of the Bragg fiber. The metal plate was next mounted in the test section of a subsonic wind tunnel. A skin friction balance was also mounted on the wall of the test section. As the wind speed in the tunnel was increased from 0 to 90 m/sec, reflected Bragg wavelengths and the fiber temperatures were recorded continuously. At a windspeed of 38.89 m/sec, the tunnel flow experienced a fan-induced turbulence registered by the skin friction balance as well as the Bragg signals. This commonality of the turbulence signal registration provided a unique calibration datum for the modulus of rigidity of the Bragg fiber assembly. This value of h has been used to calculate the values of shear stress at various tunnel speeds on the basis of Bragg wavelength changes at those speeds.

  2. Biological dosimetry; Dosimetria biologica

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero C, C.; Arceo M, C., E-mail: citlali.guerrero@inin.gob.m [ININ, Departamento de Biologia, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2010-07-01

    In the Instituto Nacional de Investigaciones Nucleares (ININ) the works to establish a laboratory of biological dosimetry were initiated in 1998, with the purpose that could assist any situation with respect to the exposition to radiation, so much of the occupational exposed personnel as of individuals not related with the handling of radio-active material. The first activity that was realized was to develop the corresponding curves in vitro of dose response for different qualities and radiation types. In the year 2000 the curve corresponding to the gamma radiation of {sup 60}Co was published and up to 2002 the curve corresponding to the X rays of 58 KeV, 120 and 250 kVp. In all the cases, the curves contain the requirements to be used in the determination of the exposition dose. At the present time the curves dose-response are developing for neutrons take place in the reactor Triga Mark III of ININ. Additionally to these activities, cases of suspicion of accidental exposition to radiation have been assisted, using in a beginning the curves published by the IAEA and, from the year 2000, the curves developed in the ININ. (Author)

  3. Palladium coated fibre Bragg grating based hydrogen sensor

    International Nuclear Information System (INIS)

    Detection of steam generator leaks in fast nuclear reactors is carried out by monitoring hydrogen in argon cover-gas. Hydrogen released during sodium cleaning of fast reactor components is required to be monitored. Hydrogen sensors with good sensitivity, stability and response time are required for all the above applications. We report a new type of hydrogen sensor with a Fibre Bragg Grating (FBG) coated with palladium thin film which is used to detect the leak of hydrogen gas in the Steam Generator (SG) module of the Fast Breeder Reactor (FBR). If water leaks into sodium, it results in sodium-water reaction. In this reaction hydrogen and sodium hydroxide are formed. Due to the explosive risk of hydrogen system, hydrogen sensors are of great interest in this case. It is known that hydrogen forms an explosive mixture with air once its concentration exceeds beyond the explosion limit of four percent. The advantages of FBG based hydrogen sensor over the other hydrogen sensors are its inherent property of safety from sparking, immunity to ambient electromagnetic interference. The sensing mechanism in this device is based on mechanical strain that is induced in the palladium coating when it absorbs hydrogen. This process physically stretches the grating and causes the grating period and grating's refractive index, to change. The Bragg wavelength shift is directly proportional to the strain induced and can be directly related to the percentage of hydrogen exposure. The online monitoring of palladium thin film coating on FBG is carried out and recorded the wavelength change and strain induced on the FBG. A hydrogen sensor set up have been fabricated which consists of SS vessel of capacity 10 litres, provided with pressure gauge, Argon filling line with a valve, Hydrogen injection line with flange, a vent line with valve and Hydrogen sensor fixing point. The Palladium coated FBG based Hydrogen sensor is tested in this experimental facility in the exposure of hydrogen in

  4. Computational aspects of algebraic curves

    CERN Document Server

    Shaska, Tanush

    2005-01-01

    The development of new computational techniques and better computing power has made it possible to attack some classical problems of algebraic geometry. The main goal of this book is to highlight such computational techniques related to algebraic curves. The area of research in algebraic curves is receiving more interest not only from the mathematics community, but also from engineers and computer scientists, because of the importance of algebraic curves in applications including cryptography, coding theory, error-correcting codes, digital imaging, computer vision, and many more.This book cove

  5. Poiseuille flow in curved spaces

    CERN Document Server

    Debus, J -D; Succi, S; Herrmann, H J

    2015-01-01

    We investigate Poiseuille channel flow through intrinsically curved (campylotic) media, equipped with localized metric perturbations (campylons). To this end, we study the flux of a fluid driven through the curved channel in dependence of the spatial deformation, characterized by the campylon parameters (amplitude, range and density). We find that the flux depends only on a specific combination of campylon parameters, which we identify as the average campylon strength, and derive a universal flux law for the Poiseuille flow. For the purpose of this study, we have improved and validated our recently developed lattice Boltzmann model in curved space by considerably reducing discrete lattice effects.

  6. SLE curves and natural parametrization

    CERN Document Server

    Lawler, Gregory F

    2010-01-01

    Developing the theory of two-sided radial and chordal $SLE$, we prove that the natural parametrization on $SLE_\\kappa$ curves is well defined for all $\\kappa < 8$. Our proof uses a two-interior-point local martingale.

  7. Management of the learning curve

    DEFF Research Database (Denmark)

    Pedersen, Peter-Christian; Slepniov, Dmitrij

    2016-01-01

    Purpose – This paper focuses on the management of the learning curve in overseas capacity expansions. The purpose of this paper is to unravel the direct as well as indirect influences on the learning curve and to advance the understanding of how these affect its management. Design/methodology...... dimensions of the learning process involved in a capacity expansion project and identified the direct and indirect labour influences on the production learning curve. On this basis, the study proposes solutions to managing learning curves in overseas capacity expansions. Furthermore, the paper concludes with...... employs qualitative methodology and draws on a longitudinal, factory-level analysis of an in-depth case study of a Danish wind turbine manufacturer. Findings – This study goes beyond a simplistic treatment of the lead time and learning required to establish a new capacity. The authors examined the...

  8. 51Cr - erythrocyte survival curves

    International Nuclear Information System (INIS)

    Sixteen patients were studied, being fifteen patients in hemolytic state, and a normal individual as a witness. The aim was to obtain better techniques for the analysis of the erythrocytes, survival curves, according to the recommendations of the International Committee of Hematology. It was used the radiochromatic method as a tracer. Previously a revisional study of the International Literature was made in its aspects inherent to the work in execution, rendering possible to establish comparisons and clarify phonomena observed in cur investigation. Several parameters were considered in this study, hindering both the exponential and the linear curves. The analysis of the survival curves of the erythrocytes in the studied group, revealed that the elution factor did not present a homogeneous answer quantitatively to all, though, the result of the analysis of these curves have been established, through listed programs in the electronic calculator. (Author)

  9. Curved characteristics behind blast waves.

    Science.gov (United States)

    Laporte, O.; Chang, T. S.

    1972-01-01

    The behavior of nonisentropic flow behind a propagating blast wave is theoretically studied. Exact solutions, expressed in closed form in terms of elementary functions, are presented for three sets of curved characteristicseind a self-similar, strong blast wave.

  10. Accuracy of needle position measurements using fiber Bragg gratings.

    Science.gov (United States)

    Henken, Kirsten; Van Gerwen, Dennis; Dankelman, Jenny; Van Den Dobbelsteen, John

    2012-11-01

    Accurate placement of the needle tip is essential in percutaneous therapies such as radiofrequency ablation (RFA) of liver tumors. Use of a robotic system for navigating the needle could improve the targeting accuracy. Real-time information on the needle tip position is needed, since a needle deflects during insertion in tissue. Needle shape can be reconstructed based on strain measurements within the needle. In the current experiment we determined the accuracy with which the needle tip position can be derived from strain measurements using Fiber Bragg Gratings (FBGs). Three glass fibers equipped with two FBGs each were incorporated in a needle. The needle was clamped at one end and deformed by applying static radial displacements at one or two locations. The FBG output was used for offline estimation of the needle shape and tip position. During deflections of the needle tip up to 12.5 mm, the tip position was estimated with a mean accuracy of 0.89 mm (std 0.42 mm). Adding a second deflection resulted in an error of 1.32 mm (std 0.48 mm). This accuracy is appropriate for applications such as RFA of liver tumors. The results further show that the accuracy can be improved by optimizing the placement of FBGs. PMID:22455615

  11. Nuclear Bragg diffraction of synchrotron x-rays

    International Nuclear Information System (INIS)

    In the last few years several groups have successfully carried out experiments involving the excitation of nuclear resonances using synchrotron radiation. All the experiments so far have used 57Fe as the resonant nucleus. The extremely narrow width of the 14.4 keV resonance in 57Fe makes these experiments very difficult at even the highest-brightness synchrotron beam lines currently available, so much effort is being devoted toward improvements in equipment and techniques. The general aim of this work is to use resonant scattering to produce high-flux beams of extremely monochromatic radiation, which can then be used as source beams for a variety of experiments. This talk, however, will stress the kinds of physics questions that can be answered using broad-band synchrotron radiation to induce resonant nuclear diffraction in perfect crystal samples. Experiments of this type are being carried out today, albeit with difficulty, using present synchrotron sources. They will become technically easy when advanced sources such as the APS become available, and it is expected that nuclear Bragg diffraction will become a standard technique

  12. Perimeter security alarm system based on fiber Bragg grating

    Science.gov (United States)

    Zhang, Cui; Wang, Lixin

    2010-11-01

    With the development of the society and economy and the improvement of living standards, people need more and more pressing security. Perimeter security alarm system is widely regarded as the first line of defense. A highly sensitive Fiber Bragg grating (FBG) vibration sensor based on the theory of the string vibration, combined with neural network adaptive dynamic programming algorithm for the perimeter security alarm system make the detection intelligently. Intelligent information processing unit identify the true cause of the vibration of the invasion or the natural environment by analyzing the frequency of vibration signals, energy, amplitude and duration. Compared with traditional perimeter security alarm systems, such as infrared perimeter security system and electric fence system, FBG perimeter security alarm system takes outdoor passive structures, free of electromagnetic interference, transmission distance through optical fiber can be as long as 20 km It is able to detect the location of event within short period of time (high-speed response, less than 3 second).This system can locate the fiber cable's breaking sites and alarm automatically if the cable were be cut. And the system can prevent effectively the false alarm from small animals, birds, strong wind, scattering things, snowfalls and vibration of sensor line itself. It can also be integrated into other security systems. This system can be widely used in variety fields such as military bases, nuclear sites, airports, warehouses, prisons, residence community etc. It will be a new force of perimeter security technology.

  13. Fiber Bragg grating sensors for strain monitoring of steelwork

    Science.gov (United States)

    Wang, Tao; He, Dawei; Yang, Fan; Wang, Yongsheng

    2009-11-01

    Over the last few years, fiber Bragg grating (FBG) sensors have attracted a lot of interest and they are being used in various applications. This paper describes the FBG sensors used for strain monitoring of bogie and other steelworks. FBG sensors and resistance strain gauges are set on different position of steel girder, and weight is loaded on the steel girder. Strain value of the steel girder can be caught by two kinds of sensors when weight loaded is changed. Result of experiment shows that strain value obtained by resistance strain gauges and FBG sensor is coinciding. There is a linear correlation between value of strain and the weight loaded on the steel girder. FBG sensors with different encapsulations are set on bogie by acrylic plastic materials in order to monitor its dynamic strains. When sinusoidal load with its frequency from 0.15Hz to 2Hz was set on the bogie, FBG sensor system with data sampling rate of 20Hz were used to monitoring the dynamic strains. Strain data caught by FBG sensor system can offer accurate description of dynamic strain, and value of strain provided by FBG sensor suits theoretical values well. The experimental observations show that FBG sensors can be set on steelworks easily, and can monitor both static strain and dynamic strains well.

  14. Integrated waveguide Bragg gratings for microwave photonics signal processing.

    Science.gov (United States)

    Burla, Maurizio; Cortés, Luis Romero; Li, Ming; Wang, Xu; Chrostowski, Lukas; Azaña, José

    2013-10-21

    Integrated Microwave photonics (IMWP) signal processing using Photonic Integrated Circuits (PICs) has attracted a great deal of attention in recent years as an enabling technology for a number of functionalities not attainable by purely microwave solutions. In this context, integrated waveguide Bragg grating (WBG) devices constitute a particularly attractive approach thanks to their compactness and flexibility in producing arbitrarily defined amplitude and phase responses, by directly acting on coupling coefficient and perturbations of the grating profile. In this article, we review recent advances in the field of integrated WBGs applied to MWP, analyzing the advantages leveraged by an integrated realization. We provide a perspective on the exciting possibilities offered by the silicon photonics platform in the field of MWP, potentially enabling integration of highly-complex active and passive functionalities with high yield on a single chip, with a particular focus on the use of WBGs as basic building blocks for linear filtering operations. We demonstrate the versatility of WBG-based devices by proposing and experimentally demonstrating a novel, continuously-tunable, integrated true-time-delay (TTD) line based on a very simple dual phase-shifted WBG (DPS-WBG). PMID:24150355

  15. Opto-acoustic behavior of coated fiber Bragg gratings.

    Science.gov (United States)

    Moccia, Massimo; Pisco, Marco; Cutolo, Antonello; Galdi, Vincenzo; Bevilacqua, Pierantonio; Cusano, Andrea

    2011-09-26

    In this paper, we present the study of the acousto-optic behavior of underwater-acoustic sensors constituted by fiber Bragg gratings (FBGs) coated by ring-shaped overlays. Via full-wave numerical simulations, we study the complex opto-acousto-mechanical interaction among an incident acoustic wave traveling in water, the optical fiber surrounded by the ring shaped coating, and the FBG inscribed the fiber, focusing on the frequency range 0.5-30 kHz of interest for SONAR applications. Our results fully characterize the mechanical behavior of an acoustically driven coated FBG, and highlight the key role played by the coating in enhancing significantly its sensitivity by comparison with a standard uncoated configuration. Furthermore, the hydrophone sensitivity spectrum exhibits characteristic resonances, which strongly improve the sensitivity with respect to its background (i.e., away from resonances) level. Via a three-dimensional modal analysis, we verify that the composite cylindrical structure of the sensor acts as an acoustic resonator tuned at the frequencies of its longitudinal vibration modes. In order to evaluate the sensor performance, we also carry out a comprehensive parametric analysis by varying the geometrical and mechanical properties of the coating, whose results also provide a useful design tool for performance optimization and/or tailoring for specific SONAR applications. Finally, a preliminary validation of the proposed numerical analysis has been carried out through experimental data obtained using polymeric coated FBGs sensors revealing a good agreement and prediction capability. PMID:21996827

  16. Photonic hydrophones based on coated fiber Bragg gratings

    International Nuclear Information System (INIS)

    The development of underwater acoustic sensors with performances competitive with conventional piezoelectric hydrophones would overcome intrinsic limitations related to the piezoceramic technology. Optical fiber technology represents a valid platform to implement acoustic sensors for underwater scenarios. Here we report on recent numerical and experimental results obtained with photonic hydrophones based on fiber-Bragg-grating (FBG) with ring shaped coatings. Our numerical results fully characterize the opto-acoustic response of the optical hydrophone, and highlight the key role played by the coating in enhancing significantly its sensitivity by comparison with a standard uncoated configuration. Furthermore, the analysis reveals that the hydrophone sensitivity spectrum exhibits characteristic resonances, which strongly improve the sensitivity with respect to its background level. Our experimental results confirmed the expected resonant behavior of such devices and are in good agreement with the numerical predictions. Optical hydrophones based on coated FBG exhibited an excellent capability to detect acoustic waves in the acoustic frequency range, with extremely high sensitivities. By comparison with bare FBGs, sensitivity enhancements of up to three orders of magnitude were found, demonstrating the effectiveness of polymeric coatings in tailoring the acoustic response of FBG-based hydrophones.

  17. Pipeline corrosion assessment using embedded Fiber Bragg grating sensors

    Science.gov (United States)

    Liang, Xiao; Huang, Ying; Galedari, Sahar Abuali; Azarmi, Fardad

    2015-04-01

    Corrosion is a leading cause of failure in metallic transmission pipelines. It significantly impacts the reliability and safety of metallic pipelines. An accurate assessment of corrosion status of the pipelines would contribute to timely pipeline maintenance and repair and extend the service life of the associated pipelines. To assess pipeline corrosion, various technologies have been investigated and the pipe-to-soil voltage potential measurement was commonly applied. However, remote and real-time corrosion assessment approaches are in urgent needs but yet achieved. Fiber optic sensors, especially, fiber Bragg gating (FBG) sensors, with unique advantages of real-time sensing, compactness, immune to EMI and moisture, capability of quasi-distributed sensing, and long life cycle, will be a perfect candidate for longterm pipeline corrosion assessment. In this study, FBG sensors are embedded inside pipeline external coating for corrosion monitoring of on-shore buried metallic transmission pipelines. Detail sensing principle, sensor calibration and embedment are introduced in this paper together with experimental corrosion evaluation testing ongoing. Upon validation, the developed sensing system could serve the purpose of corrosion monitoring to the numerous metallic pipelines across nation and would possibly reduce the pipeline corrosion induced tragedies.

  18. X-ray wavefront modeling of Bragg diffraction from crystals

    Science.gov (United States)

    Sutter, John P.

    2011-09-01

    The diffraction of an X-ray wavefront from a slightly distorted crystal can be modeled by the Takagi-Taupin theory, an extension of the well-known dynamical diffraction theory for perfect crystals. Maxwell's equations applied to a perturbed periodic medium yield two coupled differential equations in the incident and diffracted amplitude. These equations are discretized for numerical calculation into the determination of the two amplitudes on the points of an integration mesh, beginning with the incident amplitudes at the crystal's top surface. The result is a set of diffracted amplitudes on the top surface (in the Bragg geometry) or the bottom surface (in the Laue geometry), forming a wavefront that in turn can be propagated through free space using the Fresnel- Huygens equations. The performance of the Diamond Light Source I20 dispersive spectrometer has here been simulated using this method. Methods are shown for transforming displacements calculated by finite element analysis into local lattice distortions, and for efficiently performing 3-D linear interpolations from these onto the Takagi-Taupin integration mesh, allowing this method to be extended to crystals under thermal load or novel mechanical bender designs.

  19. Composite scarf repair monitoring using fiber Bragg grating sensors

    Science.gov (United States)

    Li, Henry C. H.; Herszberg, Israel; Davis, Claire E.; Stoddart, Paul R.

    2007-04-01

    Structural health monitoring (SHM) technology may be applied to composite bonded repairs to enable the continuous through-life assessment of the repair efficacy. This paper describes an SHM technique for the detection of debonding in composite scarf repairs using fibre optic Bragg grating strain sensors. A typical composite sandwich structure with a scarf repair on one surface is examined in this paper. A finite element study was conducted which showed that the strain in the debonded region changed significantly compared to the undamaged state. A differential strain approach was used to facilitate the detection of debonds, where two sensors were strategically positioned so that their strain differential increased as the damage propagated. With the use of matching gratings, this technique greatly reduced the support equipment requirement by converting the spectral information into an intensity-modulated signal, thus allowing a compact photodetector to be used for sensor interrogation. An experimental investigation was conducted to validate the theoretically predicted results. The experimental measurements agreed well with the numerical findings qualitatively, indicating that the proposed scheme has great potential as a simple and effective monitoring technique for composite scarf repairs.

  20. Riding the Canadian yield curve

    OpenAIRE

    Jin, Yan; Yang, Xue

    2007-01-01

    Riding the yield curve, a trading strategy of buying long-term bills and sell them before maturity, has been a popular means to achieve excess returns over the buying-and-holding strategy. This paper looks at historic excess returns of Treasury Bill and Bond markets in Canada. Our empirical results indicate that, the riding yield curve strategy does offer very small excess returns, but these excess returns show that neither strategy stochastically dominates the other. Furthermore, these exces...

  1. Vanishing torsion of parametric curves

    Institute of Scientific and Technical Information of China (English)

    JUH(A)SZ Imre

    2007-01-01

    We consider the class of parametric curves that can be represented by combination of control points and basis functions. A control point is let vary while the rest is held fixed. It's shown that the locus of the moving control point that yields points of zero torsion is the osculating plane of the corresponding discriminant curve at its point of the same parameter value. The special case is studied when the basis functions sum to one.

  2. Projection-based curve clustering

    OpenAIRE

    Auder, Benjamin; Fischer, Aurélie

    2011-01-01

    This paper focuses on unsupervised curve classification in the context of nuclear industry. At the Commissariat à l'Energie Atomique (CEA), Cadarache (France), the thermal-hydraulic computer code CATHARE is used to study the reliability of reactor vessels. The code inputs are physical parameters and the outputs are time evolution curves of a few other physical quantities. As the CATHARE code is quite complex and CPU-time consuming, it has to be approximated by a regression model. This regress...

  3. Dark baryons and rotation curves

    OpenAIRE

    Burkert, A.; Silk, J.

    1997-01-01

    The best measured rotation curve for any galaxy is that of the dwarf spiralXXXX DDO 154, which extends out to about 20 disk scale lengths. It provides an ideal laboratory for testing the universal density profile prediction from high resolution numerical simulations of hierarchical clustering in cold dark matter dominated cosmological models. We find that the observed rotation curve cannot be fit either at small radii, as previously noted, or at large radii. We advocate a resolution of this d...

  4. Laffer Curves and Public Goods

    OpenAIRE

    John Hartwick

    2015-01-01

    We set out and solve a static neoclassical model with a labor/leisure choice for agents and a government sector producing a Samuelsonian public good. Numerical solutions vary considerably with the elasticity of substitution for commodities in an agent's utility function. We focus on solutions with an income tax rate set by the government (second best solutions). Govern- ment revenue varies with the rate of income tax (expressed in a Laffer Curve) and we observe that such curves generally peak...

  5. Laffer Curves and public goods

    OpenAIRE

    Hartwick, John

    2015-01-01

    We set out and solve a static neoclassical model with a labor/leisure choice for agents and a government sector producing a Samuelsonian public good. Numerical solutions vary considerably with the elasticity of substitution for commodities in an agent's utility function. We focus on solutions with an income tax rate set by the government (second best solutions). Government revenue varies with the rate of income tax (expressed in a Laffer Curve) and we observe that such curves generally peak "...

  6. Fiber Optic Fabry-Perot Current Sensor Integrated with Magnetic Fluid Using a Fiber Bragg Grating Demodulation

    OpenAIRE

    Ji Xia; Qi Wang; Xu Liu; Hong Luo

    2015-01-01

    An optical fiber current sensor based on Fabry-Perot interferometer using a fiber Bragg grating demodulation is proposed. Magnetic fluid is used as a sensitive medium in fiber optical Fabry-Perot (F-P) cavity for the optical characteristic of magnetic-controlled refractive index. A Fiber Bragg grating (FBG) is connected after the F-P interferometer which is used to reflect the optical power at the Bragg wavelength of the interference transmission spectrum. The corresponding reflective power o...

  7. Integrated intensities in Laue-Bragg cases for non-absorbing crystals in X-ray dynamical diffraction

    International Nuclear Information System (INIS)

    Integrated power ratios in Laue-Bragg cases are obtained for non-absorbing crystals. The reciprocity theorem is used to show that wave fields on exit surfaces in Laue-Bragg cases are identical to crystal wave fields of the Bragg case. The formulae are expressed analytically by a combination of modified Bessel and Struve functions of the first order. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  8. Inlfuence of core index on group delay of ifber Bragg gratings%纤芯折射率对光纤Bragg光栅群时延的影响

    Institute of Scientific and Technical Information of China (English)

    尚云博

    2014-01-01

    采用数值计算的方法研究了了纤芯折射率对光纤Bragg光栅群时延的影响。结果表明:随着纤芯折射率的增大光纤Bragg光栅的群时延量不断减小,时延峰值产生红移,且移动的幅度较大;同时一定带宽的谐振峰两边的旁瓣加强,整体呈现递减趋势。这些规律为设计新型的光器件提供理论参考。%The influence of core index on group delay of fiber Bragg gratings were investigated by numerical simulation method. The results indicate that the group delay decreases with core index increasing. The group delay curves are red-shifted and the degrees of the increasing. A certain bandwidth of resonance peaks on both sides of the side lobe. Present the downward trend. This provides theoretical basis for designing the Optical device based on fiber Bragg gratings.

  9. Inlfuence of core diameter on group delay of ifber Bragg gratings%纤芯半径对光纤Bragg光栅群时延的影响

    Institute of Scientific and Technical Information of China (English)

    尚云博

    2014-01-01

    运用数值计算的方法分析了纤芯半径对光纤Bragg光栅群时延的影响。结果表明:随着纤芯半径的增大光纤Bragg光栅的群时延量不断减小,时延峰值产生红移,同时一定带宽的谐振峰两边的旁瓣加强,整体呈现递减趋势。这些规律为设计新型的光器件提供理论参考。%The influence of core diameter on group delay of fiber Bragg gratings were presented by numerical simulation method. The results indicate that the group delay decreases with core diameter increasing. The group delay curves are red-shifted and the certain bandwidth of resonance peaks on both sides of the side lobe. Present the downward trend. This provides theoretical basis for designing the Optical device based on fiber Bragg gratings.

  10. Biological Threats

    Science.gov (United States)

    ... Workplace Plans School Emergency Plans Main Content Biological Threats Biological agents are organisms or toxins that can ... for Disease Control and Prevention . Before a Biological Threat Unlike an explosion, a biological attack may or ...

  11. Cochlear microphonic broad tuning curves

    Science.gov (United States)

    Ayat, Mohammad; Teal, Paul D.; Searchfield, Grant D.; Razali, Najwani

    2015-12-01

    It is known that the cochlear microphonic voltage exhibits much broader tuning than does the basilar membrane motion. The most commonly used explanation for this is that when an electrode is inserted at a particular point inside the scala media, the microphonic potentials of neighbouring hair cells have different phases, leading to cancelation at the electrodes location. In situ recording of functioning outer hair cells (OHCs) for investigating this hypothesis is exceptionally difficult. Therefore, to investigate the discrepancy between the tuning curves of the basilar membrane and those of the cochlear microphonic, and the effect of phase cancellation of adjacent hair cells on the broadness of the cochlear microphonic tuning curves, we use an electromechanical model of the cochlea to devise an experiment. We explore the effect of adjacent hair cells (i.e., longitudinal phase cancellation) on the broadness of the cochlear microphonic tuning curves in different locations. The results of the experiment indicate that active longitudinal coupling (i.e., coupling with active adjacent outer hair cells) only slightly changes the broadness of the CM tuning curves. The results also demonstrate that there is a π phase difference between the potentials produced by the hair bundle and the soma near the place associated with the characteristic frequency based on place-frequency maps (i.e., the best place). We suggest that the transversal phase cancellation (caused by the phase difference between the hair bundle and the soma) plays a far more important role than longitudinal phase cancellation in the broadness of the cochlear microphonic tuning curves. Moreover, by increasing the modelled longitudinal resistance resulting the cochlear microphonic curves exhibiting sharper tuning. The results of the simulations suggest that the passive network of the organ of Corti determines the phase difference between the hair bundle and soma, and hence determines the sharpness of the

  12. Efficient Rejoining of DNA Double-Strand Breaks despite Increased Cell-Killing Effectiveness following Spread-Out Bragg Peak Carbon-Ion Irradiation.

    Science.gov (United States)

    Averbeck, Nicole B; Topsch, Jana; Scholz, Michael; Kraft-Weyrather, Wilma; Durante, Marco; Taucher-Scholz, Gisela

    2016-01-01

    Radiotherapy of solid tumors with charged particles holds several advantages in comparison to photon therapy; among them conformal dose distribution in the tumor, improved sparing of tumor-surrounding healthy tissue, and an increased relative biological effectiveness (RBE) in the tumor target volume in the case of ions heavier than protons. A crucial factor of the biological effects is DNA damage, of which DNA double-strand breaks (DSBs) are the most deleterious. The reparability of these lesions determines the cell survival after irradiation and thus the RBE. Interestingly, using phosphorylated H2AX as a DSB marker, our data in human fibroblasts revealed that after therapy-relevant spread-out Bragg peak irradiation with carbon ions DSBs are very efficiently rejoined, despite an increased RBE for cell survival. This suggests that misrepair plays an important role in the increased RBE of heavy-ion radiation. Possible sources of erroneous repair will be discussed. PMID:26904506

  13. Efficient rejoining of DNA double-strand breaks despite increased cell-killing effectiveness following spread-out Bragg peak carbon-ion irradiation

    Directory of Open Access Journals (Sweden)

    Nicole Bernadette Averbeck

    2016-02-01

    Full Text Available Radiotherapy of solid tumors with charged particles holds several advantages in comparison to photon therapy; among them conformal dose distribution in the tumor, improved sparing of tumor-surrounding healthy tissue, and an increased relative biological effectiveness (RBE in the tumor target-volume in the case of ions heavier than protons. A crucial factor of the biological effects is DNA damage, of which DNA double strand breaks (DSBs are the most deleterious. The reparability of these lesions determines the cell survival after irradiation and thus the RBE. Interestingly, using phosphorylated H2AX as a DSB marker, our data in human fibroblasts revealed that after therapy-relevant spread-out Bragg Peak irradiation with carbon ions DSBs are very efficiently rejoined, despite an increased RBE for cell survival. This suggests that misrepair plays an important role in the increased RBE of heavy-ion radiation. Possible sources of erroneous repair will be discussed.

  14. Using Dual-wavelength Fiber Bragg Gratings for Temperature and Strain Sensing at Cryogenic Temperature

    Science.gov (United States)

    Wu, Meng-Chou; Prosser, William H.; Rogowski, Robert S.; DeHaven, Stanton L.

    2003-01-01

    By using dual-wavelength fiber-optic Bragg gratings, a new technique has been developed for sensing both temperature and strain simultaneously in cryogenic temperature range. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a dual-wavelength sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. These coefficients were used to construct the elements of the K matrix, which enables to determine inversely the strain and temperature changes by measuring the wavelength shifts of the dual-wavelength Bragg grating. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found from about 70 K to 140 K. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. Several alternatives are proposed to resolve this problem. The effectiveness and sensitivities of these measurements in different temperature ranges are discussed. The separation of two wavelengths for the dual-wavelength Bragg grating has been widened to increase the sensitivities of measurement; however, this separation can still be covered in the scanning range from single scanning laser.

  15. Effects of Coating and Diametric Load on Fiber Bragg Gratings as Cryogenic Temperature Sensors

    Science.gov (United States)

    Wu, meng-Chou; Pater, Ruth H.; DeHaven, Stanton L.

    2008-01-01

    Cryogenic temperature sensing was demonstrated using pressurized fiber Bragg gratings (PFBGs) with polymer coating of various thicknesses. The PFBG was obtained by applying a small diametric load to a regular fiber Bragg grating (FBG). The Bragg wavelengths of FBGs and PFBG were measured at temperatures from 295 K to 4.2 K. The temperature sensitivities of the FBGs were increased by the polymer coating. A physical model was developed to relate the Bragg wavelength shifts to the thermal expansion coefficients, Young's moduli, and thicknesses of the coating polymers. When a diametric load of no more than 15 N was applied to a FBG, a pressure-induced transition occurred at 200 K during the cooling cycle. The pressure induced transition yielded PFBG temperature sensitivities three times greater than conventional FBGs for temperatures ranging from 80 to 200 K, and ten times greater than conventional fibers for temperatures below 80 K. PFBGs were found to produce an increased Bragg wavelength shift of 2.2 nm compared to conventional FBGs over the temperature range of 4.2 to 300 K. This effect was independent of coating thickness and attributed to the change of the fiber thermo-optic coefficient.

  16. Adaptive Integrated Optical Bragg Grating in Semiconductor Waveguide Suitable for Optical Signal Processing

    Science.gov (United States)

    Moniem, T. A.

    2016-05-01

    This article presents a methodology for an integrated Bragg grating using an alloy of GaAs, AlGaAs, and InGaAs with a controllable refractive index to obtain an adaptive Bragg grating suitable for many applications on optical processing and adaptive control systems, such as limitation and filtering. The refractive index of a Bragg grating is controlled by using an external electric field for controlling periodic modulation of the refractive index of the active waveguide region. The designed Bragg grating has refractive indices programmed by using that external electric field. This article presents two approaches for designing the controllable refractive indices active region of a Bragg grating. The first approach is based on the modification of a planar micro-strip structure of the iGaAs traveling wave as the active region, and the second is based on the modification of self-assembled InAs/GaAs quantum dots of an alloy from GaAs and InGaAs with a GaP traveling wave. The overall design and results are discussed through numerical simulation by using the finite-difference time-domain, plane wave expansion, and opto-wave simulation methods to confirm its operation and feasibility.

  17. The influence of adhesive on fiber Bragg grating strain sensor

    Science.gov (United States)

    Chen, Jixuan; Gong, Huaping; Jin, Shangzhong; Li, Shuhua

    2009-08-01

    A fiber Bragg grating (FBG) sensor was fixed on the uniform strength beam with three adhesives, which were modified acrylate, glass glue and epoxy resin. The influence of adhesive on FBG strain sensor was investigated. The strain of FBG sensor was varied by loading weight to the uniform strength beam. The wavelength shift of the FBG sensor fixed by the three kinds of adhesive were measured with different weight at the temperatures 0°C, 10°C, 20°C, 30°C, 40°C. The linearity, sensitivity and their stability at different temperature of FBG sensor which fixed by every kind of adhesives were analyzed. The results show that, the FBG sensor fixed by the modified acrylate has a high linearity, and the linear correlation coefficient is 0.9996. It also has a high sensitivity which is 0.251nm/kg. The linearity and the sensitivity of the FBG sensor have a high stability at different temperatures. The FBG sensor fixed by the glass glue also has a high linearity, and the linear correlation coefficient is 0.9986, but it has a low sensitivity which is only 0.041nm/kg. The linearity and the sensitivity of the FBG sensor fixed by the glass glue have a high stability at different temperatures. When the FBG sensor is fixed by epoxy resin, the sensitivity and linearity is affected significantly by the temperature. When the temperature changes from 0°C to 40°C, the sensitivity decreases from 0.302nm/kg to 0.058nm/kg, and the linear correlation coefficient decreases from 0.9999 to 0.9961.

  18. Canonical curves with low apolarity

    CERN Document Server

    Ballico, Edoardo; Notari, Roberto

    2010-01-01

    Let $k$ be an algebraically closed field and let $C$ be a non--hyperelliptic smooth projective curve of genus $g$ defined over $k$. Since the canonical model of $C$ is arithmetically Gorenstein, Macaulay's theory of inverse systems allows to associate to $C$ a cubic form $f$ in the divided power $k$--algebra $R$ in $g-2$ variables. The apolarity of $C$ is the minimal number $t$ of linear form in $R$ needed to write $f$ as sum of their divided power cubes. It is easy to see that the apolarity of $C$ is at least $g-2$ and P. De Poi and F. Zucconi classified curves with apolarity $g-2$ when $k$ is the complex field. In this paper, we give a complete, characteristic free, classification of curves $C$ with apolarity $g-1$ (and $g-2$).

  19. Elliptic curves a computational approach

    CERN Document Server

    Schmitt, Susanne; Pethö, Attila

    2003-01-01

    The basics of the theory of elliptic curves should be known to everybody, be he (or she) a mathematician or a computer scientist. Especially everybody concerned with cryptography should know the elements of this theory. The purpose of the present textbook is to give an elementary introduction to elliptic curves. Since this branch of number theory is particularly accessible to computer-assisted calculations, the authors make use of it by approaching the theory under a computational point of view. Specifically, the computer-algebra package SIMATH can be applied on several occasions. However, the book can be read also by those not interested in any computations. Of course, the theory of elliptic curves is very comprehensive and becomes correspondingly sophisticated. That is why the authors made a choice of the topics treated. Topics covered include the determination of torsion groups, computations regarding the Mordell-Weil group, height calculations, S-integral points. The contents is kept as elementary as poss...

  20. Rational points on elliptic curves

    CERN Document Server

    Silverman, Joseph H

    2015-01-01

    The theory of elliptic curves involves a pleasing blend of algebra, geometry, analysis, and number theory. This book stresses this interplay as it develops the basic theory, thereby providing an opportunity for advanced undergraduates to appreciate the unity of modern mathematics. At the same time, every effort has been made to use only methods and results commonly included in the undergraduate curriculum. This accessibility, the informal writing style, and a wealth of exercises make Rational Points on Elliptic Curves an ideal introduction for students at all levels who are interested in learning about Diophantine equations and arithmetic geometry. Most concretely, an elliptic curve is the set of zeroes of a cubic polynomial in two variables. If the polynomial has rational coefficients, then one can ask for a description of those zeroes whose coordinates are either integers or rational numbers. It is this number theoretic question that is the main subject of this book. Topics covered include the geometry and ...

  1. Testing the validity of stock-recruitment curve fits

    International Nuclear Information System (INIS)

    The utilities relied heavily on the Ricker stock-recruitment model as the basis for quantifying biological compensation in the Hudson River power case. They presented many fits of the Ricker model to data derived from striped bass catch and effort records compiled by the National Marine Fisheries Service. Based on this curve-fitting exercise, a value of 4 was chosen for the parameter alpha in the Ricker model, and this value was used to derive the utilities' estimates of the long-term impact of power plants on striped bass populations. A technique was developed and applied to address a single fundamental question: if the Ricker model were applicable to the Hudson River striped bass population, could the estimates of alpha from the curve-fitting exercise be considered reliable. The technique involved constructing a simulation model that incorporated the essential biological features of the population and simulated the characteristics of the available actual catch-per-unit-effort data through time. The ability or failure to retrieve the known parameter values underlying the simulation model via the curve-fitting exercise was a direct test of the reliability of the results of fitting stock-recruitment curves to the real data. The results demonstrated that estimates of alpha from the curve-fitting exercise were not reliable. The simulation-modeling technique provides an effective way to identify whether or not particular data are appropriate for use in fitting such models. 39 refs., 2 figs., 3 tabs

  2. Titania single crystals with a curved surface

    Science.gov (United States)

    Yang, Shuang; Yang, Bing Xing; Wu, Long; Li, Yu Hang; Liu, Porun; Zhao, Huijun; Yu, Yan Yan; Gong, Xue Qing; Yang, Hua Gui

    2014-11-01

    Owing to its scientific and technological importance, crystallization as a ubiquitous phenomenon has been widely studied over centuries. Well-developed single crystals are generally enclosed by regular flat facets spontaneously to form polyhedral morphologies because of the well-known self-confinement principle for crystal growth. However, in nature, complex single crystalline calcitic skeleton of biological organisms generally has a curved external surface formed by specific interactions between organic moieties and biocompatible minerals. Here we show a new class of crystal surface of TiO2, which is enclosed by quasi continuous high-index microfacets and thus has a unique truncated biconic morphology. Such single crystals may open a new direction for crystal growth study since, in principle, crystal growth rates of all facets between two normal {101} and {011} crystal surfaces are almost identical. In other words, the facet with continuous Miller index can exist because of the continuous curvature on the crystal surface.

  3. Spatial and spectral mode filtration in phase-locked array of injection lasers with volume Bragg grating

    International Nuclear Information System (INIS)

    High-power edge-emitting lasers with low divergence of the output beam are highly desired for a number of applications. In order to obtain high optical power one needs to expand the emitting area of the laser which usually leads to multi-mode lasing with broad spectrum and poor beam quality. Here we present the study of using a volume Bragg grating (VBG) as a spatial and spectral mode filter for phase-locked arrays of edge-emitting lasers based on 1D photonic bandgap crystals. Emitters in the arrays are synchronized due to the expanded vertical waveguide, which results in the lasing of high order oscillating modes. One lobe of high order mode was used to create an external cavity with VBG. We studied far-fields, spectra and L-I curves of the external cavity lasers and demonstrated that 500 mW of the output optical power could be concentrated in one lobe with the divergence as low as 1° and spectral width of 0.6 nm

  4. Operation manual for EDXRDDA - a software package for Bragg peak analysis of energy dispersive powder X-ray diffraction data

    International Nuclear Information System (INIS)

    EDXRDDA is a software package for analysis of raw data for energy dispersive x-ray diffraction from powder samples. It resolves the spectra into individual peaks by a constrained non-linear least squares method (Hughes and Sexton, 1988). The profile function adopted is the Gaussian/Lorentzian product with the mixing ratio refinable in the program. The program is implemented on an IBM PC and is highly interactive with extensive plotting facilities. This report is a user's guide for running the program. In the first step after inputting the spectra, the full spectra is plotted on the screen. The user then chooses a portion of this for peak resolution. The initial guess for the peak intensity, peak position are input with the help of a cursor or a mouse. Upto twenty peaks can be fitted at a time in an interval of 500 channels. For overlapping peaks, various constraints can be applied. Bragg peaks and fluorescence peaks with different half widths can be handled simultaneously. The program on execution produces a look up table which contains the refined values of the peak position, half width, peak intensity, integrated intensity, and their error estimates of each peak. The program is very general and can also be used for curve fitting of data from many other experiments. (author). 2 refs., 7 figs., 2 appendices

  5. Curved branes with regular support

    CERN Document Server

    Antoniadis, Ignatios; Klaoudatou, Ifigeneia

    2016-01-01

    We study spacetime singularities in a general five-dimensional braneworld with curved branes satisfying four-dimensional maximal symmetry. The bulk is supported by an analog of perfect fluid with the time replaced by the extra coordinate. We show that contrary to the existence of finite distance singularities from the brane location in any solution with flat (Minkowski) branes, in the case of curved branes there are singularity-free solutions for a range of equations of state compatible with the null energy condition.

  6. The New Keynesian Phillips Curve

    DEFF Research Database (Denmark)

    Ólafsson, Tjörvi

    This paper provides a survey on the recent literature on the new Keynesian Phillips curve: the controversies surrounding its microfoundation and estimation, the approaches that have been tried to improve its empirical fit and the challenges it faces adapting to the open-economy framework. The new......, learning or state-dependant pricing. The introduction of openeconomy factors into the new Keynesian Phillips curve complicate matters further as it must capture the nexus between price setting, inflation and the exchange rate. This is nevertheless a crucial feature for any model to be used for inflation...... forecasting in a small open economy like Iceland....

  7. Migration and the Wage Curve:

    DEFF Research Database (Denmark)

    Brücker, Herbert; Jahn, Elke J.

      Based on a wage curve approach we examine the labor market effects of migration in Germany. The wage curve relies on the assumption that wages respond to a change in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously in...... with a vocational degree. The wage and employment effects of migration are moderate: a 1 percent increase in the German labor force through immigration increases the aggregate unemployment rate by less than 0.1 percentage points and reduces average wages by less 0.1 percent. While native workers...

  8. Principal Curves on Riemannian Manifolds

    DEFF Research Database (Denmark)

    Hauberg, Søren

    Curves from Hastie & Stuetzle to data residing on a complete Riemannian manifold. We show that for elliptical distributions in the tangent of spaces of constant curvature, the standard principal geodesic is a principal curve. The proposed model is simple to compute and avoids many of the pitfalls of...... to imply that the methods only work well when the manifold is mostly flat within the support of the generating distribution. We argue that instead of generalizing linear Euclidean models, it is more fruitful to generalize non-linear Euclidean models. Specifically, we extend the classic Principal...

  9. Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

    Institute of Scientific and Technical Information of China (English)

    Wang Kui-Ru; Cheng Jie-Lin; Sang Xin-Zhu; Chen Gong

    2011-01-01

    This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating. We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons. Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion, which is much more approximate to the light source for the practical purpose. We discuss in detail the effects of the soliton's velocity with some parameters in the process of transmission. The results show that by choosing special parameters, one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale.

  10. Simultaneous Temperature and Strain Sensing for Cryogenic Applications Using Dual-Wavelength Fiber Bragg Gratings

    Science.gov (United States)

    Wu, Meng-Chou; Prosser, William H.

    2003-01-01

    A new technique has been developed for sensing both temperature and strain simultaneously by using dual-wavelength fiber-optic Bragg gratings. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. This enables the simultaneous measurement of temperature and strain. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. The effectiveness and sensitivities of these measurements in different temperature ranges are also discussed.

  11. Design of a Label-Free, Distributed Bragg Grating Resonator Based Dielectric Waveguide Biosensor

    Directory of Open Access Journals (Sweden)

    Florian Kehl

    2015-01-01

    Full Text Available In this work, we present a resonant, dielectric waveguide device based on distributed Bragg gratings for label-free biosensing applications. The refractive index sensitive optical transducer aims at improving the performance of planar waveguide grating sensor systems with limited Q-factor and dynamic range by combing the advantages of resonant cavities, such as a multitude of resonance peaks with high finesse, with the manageable complexity of waveguide grating couplers. The general sensor concept is introduced and supported by theoretical considerations as well as numerical simulations based on Coupled Mode Theory. In contrast to a single Bragg grating reflector, the presented Fabry-Pérot type distributed Bragg resonator exhibits an extended measurement range as well as relaxed fabrication tolerances. The resulting, relatively simple sensor structure can be fabricated with standard lithographic means and is independent of expensive light-sources and/or detectors, making an affordable but sensitive device, potentially suitable for point-of-care applications.

  12. Bragg band gaps tunability in an homogeneous piezoelectric rod with periodic electrical boundary conditions

    Science.gov (United States)

    Degraeve, S.; Granger, C.; Dubus, B.; Vasseur, J. O.; Pham Thi, M.; Hladky-Hennion, A.-C.

    2014-05-01

    An homogeneous piezoelectric rod is shown to exhibit Bragg band gaps when an electrical boundary condition is applied periodically with the help of metallic electrodes. An analytical model is developed which formulation depends on the applied electric boundary condition and reveals that Bragg band gaps occurring in this very peculiar phononic crystal are related to the electric charge located on the electrodes. Moreover, via an accurate boundary condition (electrodes connected in short circuit, in open circuit, or through an external capacitance), full tunability of the Bragg band gaps can be achieved. Measurements of ultrasonic transmission present an overall excellent agreement with the theoretical results. This phononic crystal can be easily manufactured and presents many potential applications as frequency filters especially for radio frequency telecommunications.

  13. A novel dual-wavelength fiber Bragg grating and its application in fiber ring laser

    Institute of Scientific and Technical Information of China (English)

    姜莉; 张东生; 董兴法; 开桂云; 董孝义

    2004-01-01

    A novel method for fabricating dual-wavelength fiber Bragg gratings (FBGs) by using one phase mask is developed. The method is based on a double-exposure technique. Our technique lends itself to writing gratings with controllable reflectivity and separation of two Bragg wavelengths. A grating with two equal transmission peaks of 20.25 dB is obtained by this method and the separation of the two Bragg wavelengths is about 0.8 nm. With the grating, we demonstrate a dual-wavelength erbium-doped fiber ring laser whose interval of the two peaks is 0.8 nm. The laser's peak powers can get 3.1 mW above and have a good stability.

  14. Characteristics of Bragg Gratings in All-Solid Photonic Bandgap Fiber

    Institute of Scientific and Technical Information of China (English)

    Bai-Ou Guan; Zhi Wang; Yang Zhang; Da Chen

    2008-01-01

    We report on fiber Bragg gratings in all-solid photonie bandgap fiber that was composed of a triangular array of high-index Ge-doped rods in pure silica background with fluorine-doped index-depressed layer surrounding the Ge-doped rod. Fiber Bragg gratings were photowritten with 193 nm ArF excimer laser and characterized for their response to strain, temperature, bending, and torsion. These gratings couple light from the forward core mode to not only backward core mode but also backward rod modes. This results in multiple resonance peaks in the reflection spectrum. All resonance wavelengths exhibited the same temperature and strain response with coefficient similar to that of Bragg gratings in standard single-mode fiber. The strength of the resonance peaks corresponding to the backward rod modes showed high sensitivity to bending and torsion.

  15. A Bragg beam splitter for hard x-ray free-electron lasers.

    Science.gov (United States)

    Osaka, Taito; Yabashi, Makina; Sano, Yasuhisa; Tono, Kensuke; Inubushi, Yuichi; Sato, Takahiro; Matsuyama, Satoshi; Ishikawa, Tetsuya; Yamauchi, Kazuto

    2013-02-11

    We report a Bragg beam splitter developed for utilization of hard x-ray free-electron lasers. The splitter is based on an ultrathin silicon crystal operating in the symmetric Bragg geometry to provide high reflectivity and transmissivity simultaneously. We fabricated frame-shaped Si(511) and (110) crystals with thicknesses below 10 μm by a reactive dry etching method using atmospheric-pressure plasma. The thickness variation over an illuminated area is less than 300 nm peak-to-valley. High crystalline perfection was verified by topographic and diffractometric measurements. The crystal thickness was evaluated from the period of the Pendellösung beats measured with a highly monochromatic and collimated x-ray probe. The crystals provide two replica pulses with uniform wavefront [(<1/50)λ] and low spatial intensity variation (<5%). These Bragg beam splitters will play an important role in innovating XFEL applications. PMID:23481739

  16. Bragg prism monochromator and analyser for super ultra-small angle neutron scattering studies

    Indian Academy of Sciences (India)

    Apoorva G Wagh; Sohrab Abbas; Markus Strobl; Wolfgang Treimer

    2008-11-01

    We have designed, fabricated and operated a novel Bragg prism monochromator–analyser combination. With a judicious choice of the Bragg reflection, its asymmetry and the apex angle of the silicon single crystal prism, the monochromator has produced a neutron beam with sub-arcsec collimation. A Bragg prism analyser with the opposite asymmetry has been tailored to accept a still sharper angular profile. With this optimized monochromator–analyser pair, we have attained the narrowest and sharpest neutron angular profile to date. At this facility, we have recorded the first SUSANS spectra spanning wave vector transfers ∼ 10−6 Å-1 to characterize samples containing agglomerates up to tens of micrometres in size.

  17. Development of tilted fibre Bragg gratings using highly coherent 255 nm radiation

    Indian Academy of Sciences (India)

    O Prakash; J Kumar; R Mahakud; U Kumbhkar; S V Nakhe; S K Dixit

    2014-02-01

    This paper reports the study on development of tilted fibre Bragg gratings using highly coherent 255 nm radiation, obtained from the second harmonic generation (SHG) of copper vapour laser (CVL). The transmission and reflection spectra of the tilted fibre Bragg gratings (TFBG) were studied for the tilt angles of 0° (normal FBG), 1°, 3° and 4° between the fibre axis and the interference fringe plane. It was observed that as the angle of fibre axis and phase mask increased, the main Bragg peak shifted towards the higher wavelength and transmission dip decreased. The transmission dip of the cladding mode first increased and then decreased after reaching a maximum with the increase in the tilt angle.

  18. Acoustical “transparency” induced by local resonance in Bragg bandgaps

    International Nuclear Information System (INIS)

    We show that sound waves can resonantly transmit through Bragg bandgaps in an acoustical duct periodically attached with an array of Helmholtz resonators, forming within the normally forbidden band a transparency window with group velocity smaller than the normal speed of sound. The transparency occurs for the locally resonant frequency so much close to the Bragg one that both the local-resonance-induced bandgap and the Bragg one heavily overlap with each other. The phenomenon seems an acoustical analog of the well-known electromagnetically induced transparency by quantum interference. Different from the Fano-like interference explanation, we also provide a mechanism for the transparency window phenomenon which makes it possible to extend the phenomenon in general

  19. Acoustical “transparency” induced by local resonance in Bragg bandgaps

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Gaokun; Wang, Xinlong, E-mail: xlwang@nju.edu.cn [Key Laboratory of Modern Acoustics and Institute of Acoustics, Nanjing University, Nanjing 210093 (China)

    2014-01-28

    We show that sound waves can resonantly transmit through Bragg bandgaps in an acoustical duct periodically attached with an array of Helmholtz resonators, forming within the normally forbidden band a transparency window with group velocity smaller than the normal speed of sound. The transparency occurs for the locally resonant frequency so much close to the Bragg one that both the local-resonance-induced bandgap and the Bragg one heavily overlap with each other. The phenomenon seems an acoustical analog of the well-known electromagnetically induced transparency by quantum interference. Different from the Fano-like interference explanation, we also provide a mechanism for the transparency window phenomenon which makes it possible to extend the phenomenon in general.

  20. How reliable do fibre Bragg grating patches perform as strain sensors?

    Science.gov (United States)

    Schlüter, Vivien Gisela; Kusche, Nadine; Habel, Wolfgang R.

    2010-09-01

    In Germany, the first guideline for the use of fibre Bragg grating strain sensors, "Optical Strain Sensor based on Fibre Bragg Grating" [1], has been developed by the GESA guideline group of VDI "The Association of German Engineers" and published by Beuth Verlag. This guideline provides the basic specifications of these sensor types and the sensor characteristics which have to be known for a reliable sensor performance. In conformity to this guideline, experimental investigations on the strain transfer characteristics of fibre Bragg grating patches have been carried out. A comparison between patches and resistance strain gauges during tensile tests and combined temperature and tensile loading was carried out. The evaluated strain gauge factor and the temperature sensitivity of the strain gauge factor have been compared to the manufacturer's data. The overall performance of the patches has been evaluated. The experimental investigations showed that there are partial disagreements between the manufacturer's specifications and the observed characteristics.

  1. Real time monitoring of petroleum leakage detection using etched fiber Bragg grating

    Science.gov (United States)

    Shivananju, B. N.; Kiran, M.; Nithin, S. P.; Vidya, M. J.; Hegde, G. M.; Asokan, S.

    2013-06-01

    Detection of petroleum leakages in pipelines and storage tanks is a very important as it may lead to significant pollution of the environment, accidental hazards, and also it is a very important fuel resource. Petroleum leakage detection sensor based on fiber optics was fabricated by etching the fiber Bragg grating (FBG) to a region where the total internal reflection is affected. The experiment shows that the reflected Bragg's wavelength and intensity goes to zero when etched FBG is in air and recovers Bragg's wavelength and intensity when it is comes in contact with petroleum or any external fluid. This acts as high sensitive, fast response fluid optical switch in liquid level sensing, petroleum leakage detection etc. In this paper we present our results on using this technique in petroleum leakage detection.

  2. Omnidirectional mirror based on Bragg stacks with a periodic gain-loss modulation

    Energy Technology Data Exchange (ETDEWEB)

    Manzanares-Martinez, Jesus; Ham-Rodriguez, Carlos Ivan [Departamento de Investigacion en Fisica, Universidad de Sonora, Apartado Postal 5-088, Hermosillo, Sonora 83000 (Mexico); Moctezuma-Enriquez, Damian, E-mail: foxonicos@gmail.com [Centro de Investigacion en Materiales Avanzados (CIMAV), Miguel de Cervantes 120, Chihuahua 31109 (Mexico); Manzanares-Martinez, Betsabe [Departamento de Fisica, Universidad de Sonora, Blvd. Luis Encinas y Rosales, Hermosillo, Sonora 83000 (Mexico)

    2014-01-15

    In this work we demonstrate that a Bragg Stack with a periodic gain-loss modulation can function as an Omnidirectional Mirror (OM) with complete reflection at any angle of incidence irrespective of the light polarization. The Bragg Stack is composed by the periodic variation of two layers with the same value of the real part of the refractive index (n{sub r}) and a periodic modulation in the imaginary part (n{sub i}). The origin of the band gaps is due to the interference of complex waves with propagating and evanescent fields in each layer. It is found that the band gaps are wider as the contrast n{sub i}/n{sub r} increases. We have found the ambient conditions to obtain an OM considering an auxiliary medium n{sup ′} external to the Bragg Stack.

  3. Omnidirectional mirror based on Bragg stacks with a periodic gain-loss modulation

    Directory of Open Access Journals (Sweden)

    Jesus Manzanares-Martinez

    2014-01-01

    Full Text Available In this work we demonstrate that a Bragg Stack with a periodic gain-loss modulation can function as an Omnidirectional Mirror (OM with complete reflection at any angle of incidence irrespective of the light polarization. The Bragg Stack is composed by the periodic variation of two layers with the same value of the real part of the refractive index (nr and a periodic modulation in the imaginary part (ni. The origin of the band gaps is due to the interference of complex waves with propagating and evanescent fields in each layer. It is found that the band gaps are wider as the contrast ni/nr increases. We have found the ambient conditions to obtain an OM considering an auxiliary medium n′ external to the Bragg Stack.

  4. Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

    International Nuclear Information System (INIS)

    This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating. We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons. Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion, which is much more approximate to the light source for the practical purpose. We discuss in detail the effects of the soliton's velocity with some parameters in the process of transmission. The results show that by choosing special parameters, one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  5. Clear as Crystal: The Story of the Braggs--How X-Ray Crystallography Has Contributed to Science

    Science.gov (United States)

    George, Robert; Patterson, John

    2014-01-01

    Here is a brief history of the work of two of Australia's most famous scientists, Sir William Bragg and his son Sir Lawrence Bragg. Jointly awarded the Nobel Prize in 1915 for their groundbreaking research into the use of X-rays to study the chemical structure and function of molecules, they have contributed to our heritage and to science at…

  6. Fabrication and Characterization of On-Chip Integrated Silicon Photonic Bragg Grating and Photonic Crystal Cavity Thermometers

    OpenAIRE

    Klimov, Nikolai N.; Purdy, Thomas; Ahmed, Zeeshan

    2015-01-01

    We report on the fabrication and characterization of photonic-based nanothermometers, a silicon photonic Bragg grating and photonic crystal cavity. When cladded with silicon dioxide layer the sensors have at least eight times better sensitivity compared to the sensitivity of conventional fiber Bragg grating sensors. We demonstrate that these photonic thermometers are a viable temperature sensing solution.

  7. J Holomorphic curves and tunneling

    International Nuclear Information System (INIS)

    In this article we propose a new method of describing instantons of certain dynamical systems whose phase spaces are not cotangent bundles. Our method relies heavily on the idea of J Holomorphic Curves first introduced by M. Gromov in 1985. We illustrate our method by applying it to the rigid body dynamics

  8. The soil reference shrinkage curve

    CERN Document Server

    Chertkov, V Y

    2014-01-01

    A recently proposed model showed how a clay shrinkage curve is transformed to the soil shrinkage curve at the soil clay content higher than a critical one. The objective of the present work was to generalize this model to the soil clay content lower a critical one. I investigated (i) the reference shrinkage curve, that is, one without cracks; (ii) the superficial layer of aggregates, with changed pore structure compared with the intraaggregate matrix; and (iii) soils with sufficiently low clay content where there are large pores inside the intraaggregate clay (so-called lacunar pores). The methodology is based on detail accounting for different contributions to the soil volume and water content during shrinkage. The key point is the calculation of the lacunar pore volume variance at shrinkage. The reference shrinkage curve is determined by eight physical soil parameters: (1) oven-dried specific volume; (2) maximum swelling water content; (3) mean solid density; (4) soil clay content; (5) oven-dried structural...

  9. Covers and the curve complex

    OpenAIRE

    Rafi, Kasra; Schleimer, Saul

    2007-01-01

    We provide the first non-trivial examples of quasi-isometric embeddings between curve complexes. These are induced either by puncturing a closed surface or via orbifold coverings. As a corollary, we give new quasi-isometric embeddings between mapping class groups.

  10. Space curves, anholonomy and nonlinearity

    Indian Academy of Sciences (India)

    Radha Balakrishnan

    2005-04-01

    Using classical differential geometry, we discuss the phenomenon of anholonomy that gets associated with a static and a moving curve. We obtain the expressions for the respective geometric phases in the two cases and interpret them. We show that there is a close connection between anholonomy and nonlinearity in a wide class of nonlinear systems.

  11. Implementation of Elliptical Curve Cryptography

    OpenAIRE

    Randhir Kumar; Akash Anil

    2011-01-01

    This paper involves the development of the Elliptical Curve Cryptography (ECC) for file formats like audio, video and Image. It is also used for the compression of same file formats. The tools are provided for hiding and retrieving data with security constraints.

  12. Supply Curves of Conserved Energy

    Energy Technology Data Exchange (ETDEWEB)

    Meier, Alan Kevin

    1982-05-01

    Supply curves of conserved energy provide an accounting framework that expresses the potential for energy conservation. The economic worthiness of a conservation measure is expressed in terms of the cost of conserved energy, and a measure is considered economical when the cost of conserved energy is less than the price of the energy it replaces. A supply curve of conserved energy is independent of energy prices; however, the economical reserves of conserved energy will depend on energy prices. Double-counting of energy savings and error propagation are common problems when estimating conservation potentials, but supply curves minimize these difficulties and make their consequences predictable. The sensitivity of the cost of conserved energy is examined, as are variations in the optimal investment strategy in response to changes in inputs. Guidelines are presented for predicting the consequences of such changes. The conservation supply curve concept can be applied to peak power, water, pollution, and other markets where consumers demand a service rather than a particular good.

  13. Equivolumetric Evolution of Planar Curves

    OpenAIRE

    2014-01-01

    We present the equivolumetric evolution of planar curves, which is a new type of curvature dependent evolution for a flame propagation model. This evolution reflects the nonlinear contribution of the curvature of the front to the flame propagation speed. We also present some numerical results of the equivolumetric evolution using the level set method.

  14. Fiber Bragg gratings in the radiation environment: Change under the influence of radiolytic hydrogen

    International Nuclear Information System (INIS)

    The change of the transmission spectra of fiber Bragg gratings written in the optical fibers, whose silica cores are doped with either germanium or nitrogen, is studied experimentally under the influence of gamma-radiation. The transmission spectra in the neighborhood of the resonance (Bragg) wavelengths were regularly recorded “in-situ” in the course of irradiation during 24 days. For this purpose, uncoated gratings were placed in a pool near the spent fuel rods of a nuclear reactor. The fibers with the gratings written in them were in immediate contact with water. The estimated total absorbed radiation dose of the fibers is approximately 5 MGy. Molecular hydrogen, which is produced by radiolysis of water and penetrates into the core of silica fiber, is found to interact with the defects of Ge-doped silica induced by gamma-radiation, thereby causing a strong impact on the parameters of the spectrum of the Bragg gratings. On the contrary, in the case of gratings inscribed in N-doped silica fibers, the hydrogen molecules interact with defects induced in the course of laser UV exposure during the grating writing only. The possible subsequent formation of additional defects in N-doped silica under the influence of gamma-radiation has no substantial impact on the transmission spectra of Bragg gratings, which remained stable. The obtained results suggest that a small amount of molecular hydrogen resided in the fiber core is the main source of radiation instability of Ge-doped fiber Bragg grating sensors in radiation environments. These hydrogen molecules can remain in the Bragg gratings, in particular, after the inscription process in the hydrogen-loaded fibers

  15. Distributed bragg reflector resonators with cylindrical symmetry and extremely high Q-factors.

    Science.gov (United States)

    Tobar, Michael E; le Floch, Jean-Michel; Cros, Dominique; Hartnett, John G

    2005-01-01

    A simple non-Maxwellian method is presented that allows the approximate solution of all the dimensions of a multilayered dielectric TE0qp mode cylindrical resonant cavity that constitutes a distributed Bragg reflection (DBR) resonator. The analysis considers an arbitrary number of alternating dielectric and free-space layers of cylindrical geometry enclosed by a metal cylinder. The layers may be arranged along the axial direction, the radial direction, or both. Given only the aspect ratio of the cavity, the desired frequency and the dielectric constants of the material layers, the relevant dimensions are determined from only a set of simultaneous equations, and iterative techniques are not required. The formulas were verified using rigorous method of lines (MoL) calculations and previously published experimental work. We show that the simple approximation gives dimensions close to the values of the optimum Bragg reflection condition determined by the rigorous analysis. The resulting solution is more compact with a higher Q-factor when compared to other reported cylindrical DBR structures. This is because it properly takes into account the effect of the aspect ratio on the Bragg antiresonance condition along the z-axis of the resonator. Previous analyses assumed the propagation in the z-direction was independent of the aspect ratio, and the layers of the Bragg reflector were a quarter of a wavelength thick along the z-direction. When the aspect ratio is properly taken into account, we show that the thickness of the Bragg reflectors are equivalent to the thickness of plane wave Bragg reflectors (or quarter wavelength plates). Thus it turns out that the sizes of the reflectors are related to the free-space propagation constant rather than the propagation constant in the z-direction. PMID:15742559

  16. Air core Bragg fibers for delivery of near-infrared laser radiation

    Science.gov (United States)

    Jelínek, Michal; Frank, Milan; Kubeček, Václav; Matějec, Vlastimil; Kašík, Ivan; Podrazký, Ondřej

    2014-12-01

    Optical fibers designed for high power laser radiation delivery represent important tools in medicine, solar systems, or industry. For such purposes several different types of glass optical fibers such as silica, sapphire, or chalcogenide ones as well as hollow-glass fibers, photonic crystal fibers and Bragg fibers have been investigated. Air-core Bragg fibers or photonic crystal fibers offer us the possibility of light transmission in a low dispersive material - air having a high damage threshold and small non-linear coefficient. However, preforms for drawing Bragg fibers can be fabricated by MCVD method similarly as preforms of standard silica fibers. In this paper we present fundamental characteristics of laboratory-designed and fabricated Bragg fibers with air cores intended for delivery of laser radiation at a wavelength range from 0.9 to 1.5 μm. Bragg fibers with different air core diameters of 5, 45 and 73 mm were prepared. The fiber core was surrounded by three pairs of circular Bragg layers. Each pair was composed of one layer with a high and one layer with a low refractive index with a contrast up to 0.03. Several laser sources emitting at 0.975, 1.06, and 1.55 μm were used as radiation sources. Attenuation coefficients, overall transmissions, bending losses, and spatial profiles of output beams from fibers were determined at these wavelengths. The lowest attenuation coefficient of 70 dB/km was determined for the 45 μm and 73 mm air-core fiber when radiation from a laser was launched into the fibers by using optical lenses. However, multimodal transmission has been observed in such condition. It has also been found that bending losses of such fibers are negligible for bending diameters higher than 15 mm.

  17. Fiber Bragg gratings in the radiation environment: Change under the influence of radiolytic hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Butov, Oleg V., E-mail: obutov@mail.ru; Golant, Konstantin M. [Kotel' nikov Institute of Radio-Engineering and Electronics of RAS, 11-7 Mokhovaya Str., Moscow 125009 (Russian Federation); Shevtsov, Igor' A.; Fedorov, Artem N. [Prolog LLC, PO Box 3007, Obninsk, the Kaluga Region 249033 (Russian Federation)

    2015-08-21

    The change of the transmission spectra of fiber Bragg gratings written in the optical fibers, whose silica cores are doped with either germanium or nitrogen, is studied experimentally under the influence of gamma-radiation. The transmission spectra in the neighborhood of the resonance (Bragg) wavelengths were regularly recorded “in-situ” in the course of irradiation during 24 days. For this purpose, uncoated gratings were placed in a pool near the spent fuel rods of a nuclear reactor. The fibers with the gratings written in them were in immediate contact with water. The estimated total absorbed radiation dose of the fibers is approximately 5 MGy. Molecular hydrogen, which is produced by radiolysis of water and penetrates into the core of silica fiber, is found to interact with the defects of Ge-doped silica induced by gamma-radiation, thereby causing a strong impact on the parameters of the spectrum of the Bragg gratings. On the contrary, in the case of gratings inscribed in N-doped silica fibers, the hydrogen molecules interact with defects induced in the course of laser UV exposure during the grating writing only. The possible subsequent formation of additional defects in N-doped silica under the influence of gamma-radiation has no substantial impact on the transmission spectra of Bragg gratings, which remained stable. The obtained results suggest that a small amount of molecular hydrogen resided in the fiber core is the main source of radiation instability of Ge-doped fiber Bragg grating sensors in radiation environments. These hydrogen molecules can remain in the Bragg gratings, in particular, after the inscription process in the hydrogen-loaded fibers.

  18. The biological effectiveness of antiproton irradiation

    DEFF Research Database (Denmark)

    Holzscheiter, Michael H.; Bassler, Niels; Agazaryan, Nzhde;

    2006-01-01

    Background and purpose: Antiprotons travel through tissue in a manner similar to that for protons until they reach the end of their range where they annihilate and deposit additional energy. This makes them potentially interesting for radiotherapy. The aim of this study was to conduct the first...... ever measurements of the biological effectiveness of antiprotons. Materials and methods: V79 cells were suspended in a semi-solid matrix and irradiated with 46.7 MeV antiprotons, 48 MeV protons, or 60Co c-rays. Clonogenic survival was determined as a function of depth along the particle beams. Dose and...... particle fluence response relationships were constructed from data in the plateau and Bragg peak regions of the beams and used to assess the biological effectiveness. Results: Due to uncertainties in antiproton dosimetry we defined a new term, called the biologically effective dose ratio (BEDR), which...

  19. A Directly-Written Monolithic Waveguide-Laser Incorporating a DFB Waveguide-Bragg Grating

    CERN Document Server

    Marshall, Graham D; Ams, Martin; Piper, James A; Withford, Michael J

    2008-01-01

    We report the fabrication and performance of the first C-band directly-written monolithic waveguide-laser. The waveguide-laser device was created in an Erbium and Ytterbium doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the waveguide-Bragg grating simultaneously and in a single processing step. The waveguide-laser was optically pumped at approximately 980 nm and lased at 1537nm with a bandwidth of less than 4 pm.

  20. Time-dependent Bragg diffraction and short-pulse reflection by one-dimensional photonic crystals

    CERN Document Server

    André, Jean-michel

    2015-01-01

    The time-dependence of the Bragg diffraction by one-dimensional photonic crystals and its influence on the short pulse reflection are studied in the framework of the coupled- wave theory. The indicial response of the photonic crystal is calculated and it appears that it presents a time-delay effect with a transient time conditioned by the extinction length. A numerical simulation is presented for a Bragg mirror in the x-ray domain and a pulse envelope modelled by a sine-squared shape. The potential consequences of the time-delay effect in time-dependent optics of short-pulses are emphasized.

  1. A high sensitive fiber Bragg grating strain sensor with automatic temperature compensation

    Institute of Scientific and Technical Information of China (English)

    Kuo Li; Zhen'an Zhou

    2009-01-01

    A high sensitive fiber Bragg grating (FBG) strain sensor with automatic temperature compensation is demonstrated. FBG is axially linked with a stick and their free ends are fixed to the measured object. When the measured strain changes, the stick does not change in length, but the FBG does. When the temperature changes, the stick changes in length to pull the FBG to realize temperature compensation. In experiments, 1.45 times strain sensitivity of bare FBG with temperature compensation of less than 0.1 nm Bragg wavelength drift over 100℃ shift is achieved.

  2. Novel Distributed Fiber Bragg Grating Sensing System Based on M-Z Interferometer

    Institute of Scientific and Technical Information of China (English)

    WU Guo-qing; BI Wei-hong; LI Hong

    2005-01-01

    One of the problems in using grating sensors is how to measure a small Bragg wavelength shift accurately. Nowadays demodulation techniques are mainly based on the edge filter, tunable filter, or interferometric scanning methods. Interferometric demodulation is widely accepted as the technology which can provide the high sensitivity. An interrogation system using the interferometric scanning method is presented, in which an unbalanced fiber M-Z interferometer is used as the wavelength scanner for temperature measurement. A novel fiber Bragg grating sensor system based on M-Z interferometric demodulation technique is presented in this paper. The temperature sensitivity measured in the experiment is almost consistent with that obtained from the theoretic calculation.

  3. Magnetic field sensor based on double-sided polished fibre-Bragg gratings

    International Nuclear Information System (INIS)

    A new magnetic field sensor based on double-sided polished fibre-Bragg gratings (FBGs) coated with an iron thin film for measuring magnetic flux density was experimentally demonstrated with the sensitivity of 25.6 nm T−1. The sensing mechanism is based on the Bragg wavelength shift as the magnetic field is measured by the proposed sensing head. Results of this study present the intensity of the reflected optical signal as a function of the applied strain on the FBG. This paper shows that an improved method for sensing the wavelength shift with changes in external magnetic field is developed by use of the double-sided polished FBGs

  4. Continuously Tunable Erbium-Doped Fiber Ring Laser Using Fiber Bragg Grating

    Directory of Open Access Journals (Sweden)

    S. W. Harun H. Ahmad and P. Poopalan

    2012-08-01

    Full Text Available An efficient tunable erbium-doped fiber (EDF ring laser utilizing a single fiber Bragg grating (FBG and an optical circulator is investigated. The laser demonstrates a threshold of 3.43 mW and a slope efficiency of 12.5%. Tunability of the fiber laser is obtained by thermal tuning of the FBG. Simultaneous temperature tuning demonstrates a 0.01 nm/oC variation in laser wavelength.Key Words:  Fiber Bragg grating, fiber laser, tunable laser, ring laser, thermal tuning

  5. Finite-difference modeling of Bragg fibers with ultrathin cladding layers via adaptive coordinate transformation

    DEFF Research Database (Denmark)

    Shyroki, Dzmitry; Lægsgaard, Jesper; Bang, Ole;

    As an alternative to the finite-element analysis or subgridding, coordinate transformation is used to “stretch” the fine-structured cladding of a Bragg fiber, and then the fullvector, equidistant-grid finite-difference computations of the modal structure are performed.......As an alternative to the finite-element analysis or subgridding, coordinate transformation is used to “stretch” the fine-structured cladding of a Bragg fiber, and then the fullvector, equidistant-grid finite-difference computations of the modal structure are performed....

  6. Bragg concentrators for hard (> 10keV) x-ray astronomy: Status report

    DEFF Research Database (Denmark)

    Pareschi, G.; Frontera, F.; Pasqualini, G.

    1997-01-01

    The use of focusing telescopes in hard X-ray (E > 10 keV) astronomy will provide better flux sensitivity and imaging performances with respect to the direct-viewing detectors, utilized until now. We present recent results obtained from our group regarding the possible use of Bragg-diffraction tec......The use of focusing telescopes in hard X-ray (E > 10 keV) astronomy will provide better flux sensitivity and imaging performances with respect to the direct-viewing detectors, utilized until now. We present recent results obtained from our group regarding the possible use of Bragg...

  7. Direct UV written planar Bragg gratings that feature zero fluence induced birefringence

    Science.gov (United States)

    Holmes, Christopher; Cooper, Peter A.; Fernando, Harendra N. J.; Stroll, Andreas; Gates, James C.; Krishnan, Chirenjeevi; Haynes, Roger; Mennea, Paolo L.; Carpenter, Lewis G.; Gawith, Corin B. E.; Roth, Martin M.; Charlton, Martin D.; Smith, Peter G. R.

    2015-12-01

    Direct UV writing is a planar fabrication process capable of simultaneously defining waveguides and Bragg gratings. The technique is fully computer controlled and uniquely uses a small focused spot ~7 μm in diameter for direct writing exposure. This work investigates its use to achieve phase trimming and Bragg grating definition in silica-on-silicon lithographic waveguides. It is observed that birefringence control using direct UV writing can be made independent of exposure fluence with this technique through tailoring substrate stress. The result is demonstrated experimentally and supported theoretically using finite element analysis.

  8. A flat microwave photonic filter based on M-Z modulatorand fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    QI Chun-hui; PEI Li; NING Ti-gang; GUO Lan; WU Shu-qiang; ZHAO Rui-feng; RUAN Yi

    2009-01-01

    A new multiple-taps and flat microwave photonic filter, which is composed of fiber Bragg grating, M-Z modulator and erbium-doped fiber, is put forward. The flat band-pass or flat band-stop response can be realized by adjusting the coupler's factor and the reflectivity of the fiber Bragg grating or the gain of the erbium-doped fiber. The free spectral range of the filter can be tuned by controlling the length of the erbium-doped fiber. The potential and feasibility of the proposed filtering structures have been demonstrated by simulation.

  9. Dose ratio proton radiography using the proximal side of the Bragg peak

    OpenAIRE

    Doolan, P. J.; Royle, G; Gibson, A.; Lu, H-M; Prieels, D.; Bentefour, E. H.

    2015-01-01

    Purpose: In recent years there has been a movement towards single-detector proton radiography, due to its potential ease of implementation within the clinical environment. One such single-detector technique is the dose ratio method, in which the dose maps from two pristine Bragg peaks are recorded beyond the patient. To date, this has only been investigated on the distal side of the lower energy Bragg peak, due to the sharp fall-off. We investigate the limits and applicability of the dose rat...

  10. Detecting antiferromagnetism of atoms in an optical lattice via optical Bragg scattering

    OpenAIRE

    Corcovilos, T. A.; Baur, S. K.; Hitchcock, J. M.; Mueller, E. J.; Hulet, R. G.

    2009-01-01

    Antiferromagnetism of ultracold fermions in an optical lattice can be detected by Bragg diffraction of light, in analogy to the diffraction of neutrons from solid state materials. A finite sublattice magnetization will lead to a Bragg peak from the (1/2 1/2 1/2) crystal plane with an intensity depending on details of the atomic states, the frequency and polarization of the probe beam, the direction and magnitude of the sublattice magnetization, and the finite optical density of the sample. Ac...

  11. Bragg mirror inscription on LiNbO3 waveguides by index microstructuration

    Science.gov (United States)

    Ferriere, Richard; Benkelfat, Badr-Eddine; Dudley, John M.; Ghoumid, Kamal

    2006-05-01

    Numerous applications in integrated optics, especially those related to multiwavelength telecommunications, require dichroic reflectors for use as narrowband or broadband wavelength-selective filters. Bragg mirrors are excellent candidates for this purpose, and we describe a method of fabricating Bragg grating reflectors in Ti-indiffused Lithium Niobate single-mode waveguides based on holographic masking in association with proton exchange. The holographic setup is employed to record a photolithographic mask directly on the substrate, enabling the inscription of waveguides with both periodic and aperiodic distributed parameters.

  12. Monitoring of ultraviolet pulse rate dependent photomechanical actuation in carbon nanotubes using fiber Bragg gratings

    International Nuclear Information System (INIS)

    In this Letter, we present a non-contact method of controlling and monitoring photomechanical actuation in carbon nanotubes (CNT) by exposing it to ultra-violet radiation at different pulse rates (10 to 200 Hz). This is accomplished by imparting a reversible photo induced strain (5–330 με) on CNT coated fibre Bragg gratings; CNT undergoes an internal reversible structural change due to cyclic photon absorption that leads to the development of mechanical strain, which in turn allows reversible switching of the Bragg wavelength. The results also reveal an interesting pulse rate dependent rise and fall times of photomechanical actuation in CNT

  13. High resolution Bragg-Fresnel optics for nanometer scale methods with soft X-rays

    OpenAIRE

    Erko, A.

    1994-01-01

    The main principles and some applications of Bragg-Fresnel multilayer optics are described. An elliptical Bragg-Fresnel multilayer lens (BFML), designed and fabricated in the IMT RAS has been used for 2-dimensional focusing of the white X-ray synchrotron beam. For the beam energy of about 12 KeV the spot size checked with the knife edge method was about 1µm. As an example of a successful application of this optical element in x-ray imaging, the fluorescence X-Ray scanning LURE-IMT microprobe ...

  14. Photonic crystal fiber Bragg grating based sensors: opportunities for applications in healthcare

    Science.gov (United States)

    Berghmans, Francis; Geernaert, Thomas; Sulejmani, Sanne; Thienpont, Hugo; Van Steenberge, Geert; Van Hoe, Bram; Dubruel, Peter; Urbanczyk, Waclaw; Mergo, Pawel; Webb, David J.; Kalli, Kyriacos; Van Roosbroeck, Jan; Sugden, Kate

    2011-12-01

    We review the state-of-the-art in photonic crystal fiber (PCF) and microstructured polymer optical fiber (mPOF) based mechanical sensing. We first introduce how the unique properties of PCF can benefit Bragg grating based temperature insensitive pressure and transverse load sensing. Then we describe how the latest developments in mPOF Bragg grating technology can enhance optical fiber pressure sensing. Finally we explain how the integration of specialty fiber sensor technology with bio-compatible polymer based micro-technology provides great opportunities for fiber sensors in the field of healthcare.

  15. Diffraction contrast of a Bragg-Fresnel lens in white and monochromatic radiation

    International Nuclear Information System (INIS)

    Recent advances in the studies of x-ray diffraction phenomena and the technology of structures with elements up to hundreds of angstroms in size open up possibilities for fabrication of effective x-ray focusing elements with three-dimensional Fresnel zone structures, namely, Bragg-Fresnel lenses (BFL). BFL differs favorably from the Fresnel zone plate by the absence of chromatic aberrations which is due to the high spectral selectivity of Bragg reflection, triangle λ/λ∼10-4 divided by 10-5. This enables observation of focusing and image transmission in the white spectrum of synchrotron radiation (SR). 7 refs., 7 figs

  16. Variable wavefront tuning with a SLM for tailored femtosecond fiber Bragg grating inscription.

    Science.gov (United States)

    Voigtländer, Christian; Krämer, Ria G; Goebel, Thorsten A; Richter, Daniel; Nolte, Stefan

    2016-01-01

    We report on the inscription of fiber Bragg gratings using femtosecond laser pulses and the phase-mask technique. The wavefront of the inscription laser is variably tuned with a spatial light modulator (SLM). By applying Fresnel lenses with different focal lengths, the period of the fiber Bragg gratings could be shifted. A linear change of the grating period for a FBG inscribed with a third-order deformed wavefront and a quadratic-period behavior for a fourth-order wavefront could be verified experimentally for the first time. PMID:26696147

  17. Microwave photonics filtering technique for interrogating a very-weak fiber Bragg grating cascade sensor

    OpenAIRE

    Ricchiuti, Amelia Lavinia; Hervás Peralta, Javier; Barrera Vilar, David; Sales Maicas, Salvador; Capmany Francoy, José

    2014-01-01

    A system to interrogate photonic sensors based on a very weak fiber Bragg grating cascade fiber is presented and experimentally validated and dedicated to detecting the presence and location of a spot event. The distributed sensor proposed consists of a 5-m-long fiber, containing 500 9-mm-long Bragg gratings with a grating separation of 10.21 mm. The principle of operation is based on a technique used to analyze microwave photonics filters. The detection of spot events along the sensor is ...

  18. Dual Measurements of Pressure and Temperature With Fiber Bragg Grating Sensor

    OpenAIRE

    Tahreer S. Mansour; Fahad M. Abdulhussein

    2015-01-01

    The fiber Bragg grating (FBG) technology has been rapidly applied in the sensing technology field. In this work, uniform FBG was used as pressure sensor based on measuring related Bragg wavelength shift. The pressure was applied directly by air compressor to the sensor and the pressure was ranged from 1 to 6 bar. This sensor also was affected by the external temperature so as a result it could be used as a temperature sensor. This sensor could be used to monitor the pressure of dams. It has b...

  19. Continuously Tunable Erbium-Doped Fiber Ring Laser Using Fiber Bragg Grating

    OpenAIRE

    2012-01-01

    An efficient tunable erbium-doped fiber (EDF) ring laser utilizing a single fiber Bragg grating (FBG) and an optical circulator is investigated. The laser demonstrates a threshold of 3.43 mW and a slope efficiency of 12.5%. Tunability of the fiber laser is obtained by thermal tuning of the FBG. Simultaneous temperature tuning demonstrates a 0.01 nm/oC variation in laser wavelength.Key Words:  Fiber Bragg grating, fiber laser, tunable laser, ring laser, thermal tuning

  20. Structural and nitrogen gas adsorption-desorption studies of bragg grating waveguide fabricated on porous silicon nanostructure

    International Nuclear Information System (INIS)

    Fabrication and structural analysis of Bragg grating waveguide on porous silicon were presented in this work. The Bragg grating structure was directly etched on porous silicon. Multilayer structure of porous silicon with alternating values of thickness and refractive index were determined. Nitrogen gas adsorption-desorption is a non-destructive method to determine the fabricated Bragg grating's interaction with gases. It is known that porous silicon is a high potential in-situ gas sensor due to the strong tube capillary effect and enormous surface area for molecular binding and detection. Thus, specific surface area and porosity of fabricated Bragg grating are also in the scope of this study. Good agreement of pore size distribution and multilayer thickness/refractive index achieved from adsorption-desorption technique and ellipsometer measurement respectively when comparing with estimations from field emission scanning electron microscopy. This Bragg grating waveguide has a big potential as gas sensor in many areas such as aerospace and in industries particularly.

  1. Dynamic Landslide Deformation Monitoring with Fiber Bragg Grating Sensors

    Science.gov (United States)

    Moore, J. R.; Gischig, V.; Button, E.; Loew, S.

    2009-12-01

    Fiber optic (FO) strain sensors are a promising new technology for in-situ landslide monitoring. General performance advantages include high resolution, fast sampling rate, and insensitivity to electrical disturbances. Here we describe a new FO monitoring system based on long-gage fiber Bragg grating sensors installed at the Randa Rockslide Laboratory in southern Switzerland. We highlight the advantages and disadvantages of the system, describe relevant first results, and compare FO data to that from traditional instruments already installed on site. The Randa rock slope has been the subject of intensive research since its failure in 1991. Around 5 million cubic meters of rock remains unstable today, moving at rates up to 20 mm / year. Traditional in-situ monitoring techniques have been employed to understand the mechanics and driving forces of the currently unstable rock mass, however these investigations are limited by the resolution and low sampling rate of the sensors. The new FO monitoring system has micro-strain resolution and offers the capability to detect sub-micrometer scale deformations in both triggered-dynamic and continuous measurements. Two types of sensors have been installed: fully-embedded borehole sensors encased in grout at depths of 38, 40, and 68 m, and surface extensometers spanning active tension cracks. Dynamic measurements are triggered by sensor deformation and recorded at 100 Hz, while continuous measurements are logged every 5 minutes. Since installation in August 2008, the FO monitoring system has been operational 90% of the time. Time series deformation data show movement rates consistent with previous borehole extensometer surveys. Accelerated displacements following installation are likely related to long-term curing and dewatering of the grout. A number of interesting transients have been recorded, which in some cases were large enough to trigger rapid sampling. The combination of short- and long-term observation offers new

  2. Biological dose representation for carbon-ion radiotherapy of unconventional fractionation

    OpenAIRE

    Kanematsu, Nobuyuki; Inaniwa, Taku

    2016-01-01

    In carbon-ion radiotherapy, single-beam delivery each day in alternate directions has been commonly practiced for operational efficiency, taking advantage of the Bragg peak and the relative biological effectiveness (RBE) for uniform dose conformation to a tumor. The treatment plans are usually evaluated with total RBE-weighted dose, which is however deficient in relevance to the biological effect in the linear-quadratic model due to its quadratic-dose term, or the dose-fractionation effect. I...

  3. A catalog of special plane curves

    CERN Document Server

    Lawrence, J Dennis

    2014-01-01

    Among the largest, finest collections available-illustrated not only once for each curve, but also for various values of any parameters present. Covers general properties of curves and types of derived curves. Curves illustrated by a CalComp digital incremental plotter. 12 illustrations.

  4. Quantum walking in curved spacetime

    Science.gov (United States)

    Arrighi, Pablo; Facchini, Stefano; Forets, Marcelo

    2016-08-01

    A discrete-time quantum walk (QW) is essentially a unitary operator driving the evolution of a single particle on the lattice. Some QWs admit a continuum limit, leading to familiar PDEs (e.g., the Dirac equation). In this paper, we study the continuum limit of a wide class of QWs and show that it leads to an entire class of PDEs, encompassing the Hamiltonian form of the massive Dirac equation in (1+1) curved spacetime. Therefore, a certain QW, which we make explicit, provides us with a unitary discrete toy model of a test particle in curved spacetime, in spite of the fixed background lattice. Mathematically, we have introduced two novel ingredients for taking the continuum limit of a QW, but which apply to any quantum cellular automata: encoding and grouping.

  5. Invariance for Single Curved Manifold

    KAUST Repository

    Castro, Pedro Machado Manhaes de

    2012-08-01

    Recently, it has been shown that, for Lambert illumination model, solely scenes composed by developable objects with a very particular albedo distribution produce an (2D) image with isolines that are (almost) invariant to light direction change. In this work, we provide and investigate a more general framework, and we show that, in general, the requirement for such in variances is quite strong, and is related to the differential geometry of the objects. More precisely, it is proved that single curved manifolds, i.e., manifolds such that at each point there is at most one principal curvature direction, produce invariant is surfaces for a certain relevant family of energy functions. In the three-dimensional case, the associated energy function corresponds to the classical Lambert illumination model with albedo. This result is also extended for finite-dimensional scenes composed by single curved objects. © 2012 IEEE.

  6. Analysis of Exoplanet Light Curves

    Science.gov (United States)

    Erdem, A.; Budding, E.; Rhodes, M. D.; Püsküllü, Ç.; Soydugan, F.; Soydugan, E.; Tüysüz, M.; Demircan, O.

    2015-07-01

    We have applied the close binary system analysis package WINFITTER to a variety of exoplanet transiting light curves taken both from the NASA Exoplanet Archive and our own ground-based observations. WINFitter has parameter options for a realistic physical model, including gravity brightening and structural parameters derived from Kopal's applications of the relevant Radau equation, and it includes appropriate tests for determinacy and adequacy of its best fitting parameter sets. We discuss a number of issues related to empirical checking of models for stellar limb darkening, surface maculation, Doppler beaming, microvariability, and transit time variation (TTV) effects. The Radau coefficients used in the light curve modeling, in principle, allow structural models of the component stars to be tested.

  7. Curved canals: Ancestral files revisited

    Directory of Open Access Journals (Sweden)

    Jain Nidhi

    2008-01-01

    Full Text Available The aim of this article is to provide an insight into different techniques of cleaning and shaping of curved root canals with hand instruments. Although a plethora of root canal instruments like ProFile, ProTaper, LightSpeed ® etc dominate the current scenario, the inexpensive conventional root canal hand files such as K-files and flexible files can be used to get optimum results when handled meticulously. Special emphasis has been put on the modifications in biomechanical canal preparation in a variety of curved canal cases. This article compiles a series of clinical cases of root canals with curvatures in the middle and apical third and with S-shaped curvatures that were successfully completed by employing only conventional root canal hand instruments.

  8. Gravitational-wave sensitivity curves

    International Nuclear Information System (INIS)

    There are several common conventions in use by the gravitational-wave community to describe the amplitude of sources and the sensitivity of detectors. These are frequently confused. We outline the merits of and differences between the various quantities used for parameterizing noise curves and characterizing gravitational-wave amplitudes. We conclude by producing plots that consistently compare different detectors. Similar figures can be generated on-line for general use at http://rhcole.com/apps/GWplotter. (paper)

  9. The Phillips Curve in Portugal

    OpenAIRE

    Rosa, Agostinho S.

    2013-01-01

    This paper estimates the Phillips curve in Portugal using the Johansen Method, with the wage inflation rate as a dependent variable, based on annual data from the period 1954-1995. The main conclusions are as follows. Firstly, in the long term, the wage inflation rate relates positively to the inflation rate and negatively to the unemployment rate, as expected. There is also a positive relationship between the wage inflation rate and the average labour productivity growth index. Secondly, in ...

  10. The Phillips Curve in Italy

    OpenAIRE

    Rosa, Agostinho S.

    2014-01-01

    The estimation of the Phillips curve in Italy, using the wage inflation rate as a dependent variable, based on annual data from the period 1961-2012, using the Johansen Method, allows us to conclude two things. Firstly, in the long term, there are two long-term relationships: the wage inflation rate relates positively to the inflation rate, negatively to the unemployment rate and positively to the average labour productivity growth index, as was expected; the inflation rate relates positively...

  11. QED_2 in Curved Backgrounds

    OpenAIRE

    Ghosh, Amit

    1996-01-01

    Here we discuss the two dimensional quantum electrodynamics in curved space-time, especially in the background of some black holes. We first show the existence of some new quantum mechanical solution which has interesting properties. Then for some special black holes we discuss the fermion-black hole scattering problem. The issue of confinement is intimately connected with these solutions and we also comment on this in this background. Finally, the entanglement entropy and the Hawking radiati...

  12. LINS Curve in Romanian Economy

    OpenAIRE

    Emilian Dobrescu

    2016-01-01

    The paper presents theoretical considerations and empirical evidence to test the validity of the Laffer in Narrower Sense (LINS) curve as a parabola with a maximum. Attention is focused on the so-called legal-effective tax gap (letg). The econometric application is based on statistical data (1990-2013) for Romania as an emerging European economy. Three cointegrating regressions (fully modified least squares, canonical cointegrating regression and dynamic least squares) and three algorithms, w...

  13. Estimation of the Phillips Curve for Latvia

    OpenAIRE

    Aleksejs Melihovs; Anna Zasova

    2007-01-01

    The current paper aims at estimating the formation mechanism of business inflation expectations to find out how the latter affect the inflation dynamics. To attain this goal, the authors estimated the traditional Phillips curve, new Keynesian Phillips curve and hybrid Phillips curve. The results obtained testify to a better explanatory power to describe the dynamics of Latvia's core inflation of the hybrid Phillips curve compared with the traditional and new Keynesian Phillips curves. Moreove...

  14. Macdonald formula for curves with planar singularities

    CERN Document Server

    Maulik, Davesh

    2011-01-01

    We generalize Macdonald's formula for the cohomology of Hilbert schemes of points on a curve from smooth curves to curves with planar singularities: we relate the cohomology of the Hilbert schemes to the cohomology of the compactified Jacobian of the curve. The new formula is a consequence of a stronger identity between certain perverse sheaves defined by a family of curves satisfying mild conditions, whose proof makes an essential use of Ng\\^o's support theorem for compactified Jacobians.

  15. Projection-based curve clustering

    International Nuclear Information System (INIS)

    This paper focuses on unsupervised curve classification in the context of nuclear industry. At the Commissariat a l'Energie Atomique (CEA), Cadarache (France), the thermal-hydraulic computer code CATHARE is used to study the reliability of reactor vessels. The code inputs are physical parameters and the outputs are time evolution curves of a few other physical quantities. As the CATHARE code is quite complex and CPU time-consuming, it has to be approximated by a regression model. This regression process involves a clustering step. In the present paper, the CATHARE output curves are clustered using a k-means scheme, with a projection onto a lower dimensional space. We study the properties of the empirically optimal cluster centres found by the clustering method based on projections, compared with the 'true' ones. The choice of the projection basis is discussed, and an algorithm is implemented to select the best projection basis among a library of orthonormal bases. The approach is illustrated on a simulated example and then applied to the industrial problem. (authors)

  16. Elementary particles in curved spaces

    International Nuclear Information System (INIS)

    The theories in particle physics are developed currently, in Minkowski space-time starting from the Poincare group. A physical theory in flat space can be seen as the limit of a more general physical theory in a curved space. At the present time, a theory of particles in curved space does not exist, and thus the only possibility is to extend the existent theories in these spaces. A formidable obstacle to the extension of physical models is the absence of groups of motion in more general Riemann spaces. A space of constant curvature has a group of motion that, although differs from that of a flat space, has the same number of parameters and could permit some generalisations. In this contribution we try to investigate some physical implications of the presumable existence of elementary particles in curved space. In de Sitter space (dS) the invariant rest mass is a combination of the Poincare rest mass and the generalised angular momentum of a particle and it permits to establish a correlation with the vacuum energy and with the cosmological constant. The consequences are significant because in an experiment the local structure of space-time departs from the Minkowski space and becomes a dS or AdS space-time. Discrete symmetry characteristics of the dS/AdS group suggest some arguments for the possible existence of the 'mirror matter'. (author)

  17. Miniature and low cost fiber bragg grating interrogator for structural monitoring in nano-satellites

    NARCIS (Netherlands)

    Toet, P.M.; Hagen, R.A.J.; Hakkesteegt, H.C.; Lugtenburg, J.; Maniscalco, M.P.

    2014-01-01

    In this paper we present a newly developed Fiber Optic measurement system, consisting of Fiber Bragg Grating (FBG) sensors and an FBG interrogator. The development of the measuring system is part of the PiezoElectric Assisted Smart Satellite Structure (PEASSS) project, which was initiated at the beg

  18. Fiber Bragg Grating Sensor for Fault Detection in Radial and Network Transmission Lines

    Directory of Open Access Journals (Sweden)

    Mehdi Shadaram

    2010-10-01

    Full Text Available In this paper, a fiber optic based sensor capable of fault detection in both radial and network overhead transmission power line systems is investigated. Bragg wavelength shift is used to measure the fault current and detect fault in power systems. Magnetic fields generated by currents in the overhead transmission lines cause a strain in magnetostrictive material which is then detected by Fiber Bragg Grating (FBG. The Fiber Bragg interrogator senses the reflected FBG signals, and the Bragg wavelength shift is calculated and the signals are processed. A broadband light source in the control room scans the shift in the reflected signal. Any surge in the magnetic field relates to an increased fault current at a certain location. Also, fault location can be precisely defined with an artificial neural network (ANN algorithm. This algorithm can be easily coordinated with other protective devices. It is shown that the faults in the overhead transmission line cause a detectable wavelength shift on the reflected signal of FBG and can be used to detect and classify different kind of faults. The proposed method has been extensively tested by simulation and results confirm that the proposed scheme is able to detect different kinds of fault in both radial and network system.

  19. Preparation and characterization of bragg fibers for delivery of laser radiation at 1064 nm

    Czech Academy of Sciences Publication Activity Database

    Matějec, Vlastimil; Kašík, Ivan; Podrazký, Ondřej; Aubrecht, Jan; Frank, M.; Jelínek, M.; Kubeček, V.

    2013-01-01

    Roč. 22, č. 1 (2013), s. 346-351. ISSN 1210-2512 R&D Projects: GA ČR GAP102/12/2361 Institutional support: RVO:67985882 Keywords : Bragg fibers * High-index contrast * MCVD method Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.796, year: 2013

  20. Angle dependent Fiber Bragg grating inscription in microstructured polymer optical fibers

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Bang, Ole

    2015-01-01

    We report on an incidence angle influence on inscription of the Fiber Bragg Gratings in Polymethyl methacrylate (PMMA) microstructured polymer optical fibers. We have shown experimentally that there is a strong preference of certain angles, labeled Gamma K, over the other ones. Angles close to...... Marshall et al. (C)2015 Optical Society of America...