WorldWideScience

Sample records for biodegradability

  1. Biodegradable Polymers

    Directory of Open Access Journals (Sweden)

    Isabelle Vroman

    2009-04-01

    Full Text Available Biodegradable materials are used in packaging, agriculture, medicine and other areas. In recent years there has been an increase in interest in biodegradable polymers. Two classes of biodegradable polymers can be distinguished: synthetic or natural polymers. There are polymers produced from feedstocks derived either from petroleum resources (non renewable resources or from biological resources (renewable resources. In general natural polymers offer fewer advantages than synthetic polymers. The following review presents an overview of the different biodegradable polymers that are currently being used and their properties, as well as new developments in their synthesis and applications.

  2. Anaerobic biodegradability of macropollutants

    DEFF Research Database (Denmark)

    Angelidaki, Irini

    2002-01-01

    A variety of test procedures for determination of anaerobic biodegradability has been reported. This paper reviews the methods developed for determination of anaerobic biodegradability of macro-pollutants. Anaerobic biodegradability of micro-pollutants is not included. Furthermore, factors import...

  3. Biodegradation and bioremediation

    DEFF Research Database (Denmark)

    Albrechtsen, H.-J.

    1996-01-01

    Anmeldelse af Alexander,M.: Biodegradation and bioremediation. Academic Press, Sandiego, USA, 1994......Anmeldelse af Alexander,M.: Biodegradation and bioremediation. Academic Press, Sandiego, USA, 1994...

  4. Biodegradable thermogels.

    Science.gov (United States)

    Park, Min Hee; Joo, Min Kyung; Choi, Bo Gyu; Jeong, Byeongmoon

    2012-03-20

    All living creatures respond to external stimuli. Similarly, some polymers undergo conformational changes in response to changes in temperature, pH, magnetic field, electrical field, or the wavelength of light. In one type of stimuli-responsive polymer, thermogel polymers, the polymer aqueous solution undergoes sol-to-gel transition as the temperature increases. Drugs or cells can be mixed into the polymer aqueous solution when it is in its lower viscosity solution state. After injection of the solution into a target site, heating prompts the formation of a hydrogel depot in situ, which can then act as a drug releasing system or a cell growing matrix. In this Account, we describe key materials developed in our laboratory for the construction of biodegradable thermogels. We particularly emphasize recently developed polypeptide-based materials where the secondary structure and nanoassembly play an important role in the determining the material properties. This Account will provide insights for controlling parameters, such as the sol-gel transition temperature, gel modulus, critical gel concentration, and degradability of the polymer, when designing a new thermogel system for a specific biomedical application. By varying the stereochemistry of amino acids in polypeptides, the molecular weight of hydrophobic/hydrophilic blocks, the composition of the polypeptides, the hydrophobic end-capping of the polypeptides, and the microsequences of a block copolymer, we have controlled the thermosensitivity and nanoassembly patterns of the polymers. We have investigated a series of thermogel biodegradable polymers. Polymers such as poly(lactic acid-co-glycolic acid), polycaprolactone, poly(trimethylene carbonate), polycyanoacrylate, sebacic ester, polypeptide were used as hydrophobic blocks, and poly(ethylene glycol) and poly(vinyl pyrrolidone) were used as hydrophilic blocks. To prepare a polymer sensitive to pH and temperature, carboxylic acid or amine groups were introduced

  5. Biodegradable synthetic bone composites

    Science.gov (United States)

    Liu, Gao; Zhao, Dacheng; Saiz, Eduardo; Tomsia, Antoni P.

    2013-01-01

    The invention provides for a biodegradable synthetic bone composition comprising a biodegradable hydrogel polymer scaffold comprising a plurality of hydrolytically unstable linkages, and an inorganic component; such as a biodegradable poly(hydroxyethylmethacrylate)/hydroxyapatite (pHEMA/HA) hydrogel composite possessing mineral content approximately that of human bone.

  6. [Biodegradation of polyethylene].

    Science.gov (United States)

    Yang, Jun; Song, Yi-ling; Qin, Xiao-yan

    2007-05-01

    Plastic material is one of the most serious solid wastes pollution. More than 40 million tons of plastics produced each year are discarded into environment. Plastics accumulated in the environment is highly resistant to biodegradation and not be able to take part in substance recycle. To increase the biodegradation efficiency of plastics by different means is the main research direction. This article reviewed the recent research works of polyethylene biodegradation that included the modification and pretreatment of polyethylene, biodegradation pathway, the relevant microbes and enzymes and the changes of physical, chemical and biological properties after biodegradation. The study directions of exploiting the kinds of life-forms of biodegradation polyethylene except the microorganisms, isolating and cloning the key enzymes and gene that could produce active groups, and enhancing the study on polyethylene biodegradation without additive were proposed.

  7. Biodegradability of plastics.

    Science.gov (United States)

    Tokiwa, Yutaka; Calabia, Buenaventurada P; Ugwu, Charles U; Aiba, Seiichi

    2009-08-26

    Plastic is a broad name given to different polymers with high molecular weight, which can be degraded by various processes. However, considering their abundance in the environment and their specificity in attacking plastics, biodegradation of plastics by microorganisms and enzymes seems to be the most effective process. When plastics are used as substrates for microorganisms, evaluation of their biodegradability should not only be based on their chemical structure, but also on their physical properties (melting point, glass transition temperature, crystallinity, storage modulus etc.). In this review, microbial and enzymatic biodegradation of plastics and some factors that affect their biodegradability are discussed.

  8. Biodegradable fiksasyon malzemeleri

    OpenAIRE

    Seber, Sinan

    2004-01-01

    Problems related to metallic implant had increased the interest to biodegradables. In this paper, the physical and chemical properties, degradation modalities, implant design, clinical studies with techniques, and complications of biodegradable implants, especially polylactic and polyglycolic acid, were reviewed. Also our studies, on the antibiotic delivery capacities of these implants; and the prediction of immunological reactions with our clinical experiences were presented.

  9. BIODEGRADABLE MICROSPHERES: A REVIEW

    Directory of Open Access Journals (Sweden)

    Kaur Dupinder

    2012-12-01

    Full Text Available Microspheres are characteristically free flowing powders consisting of proteins or synthetic polymers having a particle size ranging from 1-1000 μm. The range of techniques for the preparation of microspheres offers a variety of opportunities to control aspects of drug administration and enhance the therapeutic efficacy of a given drug. Of the many polymeric drug delivery systems, biodegradable polymers have been used widely as drug delivery systems because of their biocompatibility and biodegradability. The majority of biodegradable polymers have been used in the form of microparticles, from which the incorporated drug is released to the environment in a controlled manner. They can be employed to deliver medication in a rate-controlled and sometimes targeted manner. Medication is released from a microsphere by drug leaching from the polymer or by degradation of the polymer matrix. This review discusses characteristics and degradation behaviors of biodegradable polymers which are currently used in drug delivery.

  10. Molecularly Imprinted Biodegradable Nanoparticles

    Science.gov (United States)

    Gagliardi, Mariacristina; Bertero, Alice; Bifone, Angelo

    2017-01-01

    Biodegradable polymer nanoparticles are promising carriers for targeted drug delivery in nanomedicine applications. Molecu- lar imprinting is a potential strategy to target polymer nanoparticles through binding of endogenous ligands that may promote recognition and active transport into specific cells and tissues. However, the lock-and-key mechanism of molecular imprinting requires relatively rigid cross-linked structures, unlike those of many biodegradable polymers. To date, no fully biodegradable molecularly imprinted particles have been reported in the literature. This paper reports the synthesis of a novel molecularly- imprinted nanocarrier, based on poly(lactide-co-glycolide) (PLGA) and acrylic acid, that combines biodegradability and molec- ular recognition properties. A novel three-arm biodegradable cross-linker was synthesized by ring-opening polymerization of glycolide and lactide initiated by glycerol. The resulting macromer was functionalized by introduction of end-functions through reaction with acryloyl chloride. Macromer and acrylic acid were used for the synthesis of narrowly-dispersed nanoparticles by radical polymerization in diluted conditions in the presence of biotin as template molecule. The binding capacity of the imprinted nanoparticles towards biotin and biotinylated bovine serum albumin was twentyfold that of non-imprinted nanoparti- cles. Degradation rates and functional performances were assessed in in vitro tests and cell cultures, demonstrating effective biotin-mediated cell internalization. PMID:28071745

  11. Molecularly Imprinted Biodegradable Nanoparticles

    Science.gov (United States)

    Gagliardi, Mariacristina; Bertero, Alice; Bifone, Angelo

    2017-01-01

    Biodegradable polymer nanoparticles are promising carriers for targeted drug delivery in nanomedicine applications. Molecu- lar imprinting is a potential strategy to target polymer nanoparticles through binding of endogenous ligands that may promote recognition and active transport into specific cells and tissues. However, the lock-and-key mechanism of molecular imprinting requires relatively rigid cross-linked structures, unlike those of many biodegradable polymers. To date, no fully biodegradable molecularly imprinted particles have been reported in the literature. This paper reports the synthesis of a novel molecularly- imprinted nanocarrier, based on poly(lactide-co-glycolide) (PLGA) and acrylic acid, that combines biodegradability and molec- ular recognition properties. A novel three-arm biodegradable cross-linker was synthesized by ring-opening polymerization of glycolide and lactide initiated by glycerol. The resulting macromer was functionalized by introduction of end-functions through reaction with acryloyl chloride. Macromer and acrylic acid were used for the synthesis of narrowly-dispersed nanoparticles by radical polymerization in diluted conditions in the presence of biotin as template molecule. The binding capacity of the imprinted nanoparticles towards biotin and biotinylated bovine serum albumin was twentyfold that of non-imprinted nanoparti- cles. Degradation rates and functional performances were assessed in in vitro tests and cell cultures, demonstrating effective biotin-mediated cell internalization.

  12. Green and biodegradable electronics

    Directory of Open Access Journals (Sweden)

    Mihai Irimia-Vladu

    2012-07-01

    Full Text Available We live in a world where the lifetime of electronics is becoming shorter, now approaching an average of several months. This poses a growing ecological problem. This brief review will present some of the initial steps taken to address the issue of electronic waste with biodegradable organic electronic materials. Many organic materials have been shown to be biodegradable, safe, and nontoxic, including compounds of natural origin. Additionally, the unique features of such organic materials suggest they will be useful in biofunctional electronics; demonstrating functions that would be inaccessible for traditional inorganic compounds. Such materials may lead to fully biodegradable and even biocompatible/biometabolizable electronics for many low-cost applications. This review highlights recent progress in these classes of material, covering substrates and insulators, semiconductors, and finally conductors.

  13. Editorial: Biodegradable Materials

    Directory of Open Access Journals (Sweden)

    Carl Schaschke

    2014-11-01

    Full Text Available This Special Issue “Biodegradable Materials” features research and review papers concerning recent advances on the development, synthesis, testing and characterisation of biomaterials. These biomaterials, derived from natural and renewable sources, offer a potential alternative to existing non-biodegradable materials with application to the food and biomedical industries amongst many others. In this Special Issue, the work is expanded to include the combined use of fillers that can enhance the properties of biomaterials prepared as films. The future application of these biomaterials could have an impact not only at the economic level, but also for the improvement of the environment.

  14. Biodegradable Materials for Nonwovens

    Science.gov (United States)

    Demand for nonwovens is increasing globally, particularly in the disposable products area. As the consumption of nonwoven products with short life increases, the burden on waste disposal also rises. In this context, biodegradable nonwovens become more important today and for the future. Several new ...

  15. Grey water biodegradability

    NARCIS (Netherlands)

    Abu Ghunmi, L.; Zeeman, G.; Fayyad, M.; Van Lier, J.B.

    2010-01-01

    Knowing the biodegradability characteristics of grey water constituents is imperative for a proper design and operation of a biological treatment system of grey water. This study characterizes the different COD fractions of dormitory grey water and investigates the effect of applying different condi

  16. Grey water biodegradability

    NARCIS (Netherlands)

    Abu Ghunmi, L.; Zeeman, G.; Fayyad, M.; Lier, van J.B.

    2011-01-01

    Knowing the biodegradability characteristics of grey water constituents is imperative for a proper design and operation of a biological treatment system of grey water. This study characterizes the different COD fractions of dormitory grey water and investigates the effect of applying different condi

  17. Absorbable and biodegradable polymers

    CERN Document Server

    Shalaby, Shalaby W

    2003-01-01

    INTRODUCTION NOTES: Absorbable/Biodegradable Polymers: Technology Evolution. DEVELOPMENT AND APPLICATIONOF NEW SYSTEMS: Segmented Copolyesters with Prolonged Strength Retention Profiles. Polyaxial Crystalline Fiber-Forming Copolyester. Polyethylene Glycol-Based Copolyesters. Cyanoacrylate-Based Systems as Tissue Adhesives. Chitosan-Based Systems. Hyaluronic Acid-Based Systems. DEVELOPMENTS IN PREPARATIVE, PROCESSING, AND EVALUATION METHODS: New Approaches to the Synthesis of Crystalline. Fiber-Forming Aliphatic Copolyesters. Advances in Morphological Development to Tailor the Performance of Me

  18. Safe biodegradable fluorescent particles

    Science.gov (United States)

    Martin, Sue I.; Fergenson, David P.; Srivastava, Abneesh; Bogan, Michael J.; Riot, Vincent J.; Frank, Matthias

    2010-08-24

    A human-safe fluorescence particle that can be used for fluorescence detection instruments or act as a safe simulant for mimicking the fluorescence properties of microorganisms. The particle comprises a non-biological carrier and natural fluorophores encapsulated in the non-biological carrier. By doping biodegradable-polymer drug delivery microspheres with natural or synthetic fluorophores, the desired fluorescence can be attained or biological organisms can be simulated without the associated risks and logistical difficulties of live microorganisms.

  19. Biodegradation of Silk Biomaterials

    OpenAIRE

    Bochu Wang; Yang Cao

    2009-01-01

    Silk fibroin from the silkworm, Bombyx mori, has excellent properties such as biocompatibility, biodegradation, non-toxicity, adsorption properties, etc. As a kind of ideal biomaterial, silk fibroin has been widely used since it was first utilized for sutures a long time ago. The degradation behavior of silk biomaterials is obviously important for medical applications. This article will focus on silk-based biomaterials and review the degradation behaviors of silk materials.

  20. Anaerobic Biodegradation of Detergent Surfactants

    Directory of Open Access Journals (Sweden)

    Erich Jelen

    2009-03-01

    Full Text Available Detergent surfactantscan be found in wastewater in relevant concentrations. Most of them are known as ready degradable under aerobic conditions, as required by European legislation. Far fewer surfactants have been tested so far for biodegradability under anaerobic conditions. The natural environment is predominantly aerobic, but there are some environmental compartments such as river sediments, sub-surface soil layer and anaerobic sludge digesters of wastewater treatment plants which have strictly anaerobic conditions. This review gives an overview on anaerobic biodegradation processes, the methods for testing anaerobic biodegradability, and the anaerobic biodegradability of different detergent surfactant types (anionic, nonionic, cationic, amphoteric surfactants.

  1. Microbial biosurfactants and biodegradation.

    Science.gov (United States)

    Ward, Owen P

    2010-01-01

    Microbial biosurfactants are amphipathic molecules having typical molecular weights of 500-1500 Da, made up of peptides, saccharides or lipids or their combinations. In biodegradation processes they mediate solubilisation, mobilization and/or accession of hydrophobic substrates to microbes. They may be located on the cell surface or be secreted into the extracellular medium and they facilitate uptake of hydrophobic molecules through direct cellular contact with hydrophobic solids or droplets or through micellarisation. They are also involved in cell physiological processes such as biofilm formation and detachment, and in diverse biofilm associated processes such as wastewater treatment and microbial pathogenesis. The protection of contaminants in biosurfactants micelles may also inhibit uptake of contaminants by microbes. In bioremediation processes biosurfactants may facilitate release of contaminants from soil, but soils also tend to bind surfactants strongly which makes their role in contaminant desorption more complex. A greater understanding of the underlying roles played by biosurfactants in microbial physiology and in biodegradative processes is developing through advances in cell and molecular biology.

  2. Biodegradation of Polypropylene Nonwovens

    Science.gov (United States)

    Keene, Brandi Nechelle

    The primary aim of the current research is to document the biodegradation of polypropylene nonwovens and filament under composting environments. To accelerate the biodegradat ion, pre-treatments and additives were incorporated into polypropylene filaments and nonwovens. The initial phase (Chapter 2) of the project studied the biodegradation of untreated polypropylene with/without pro-oxidants in two types of composting systems. Normal composting, which involved incubation of samples in food waste, had little effect on the mechanical properties of additive-free spunbond nonwovens in to comparison prooxidant containing spunbond nonwovens which were affected significantly. Modified composting which includes the burial of samples with food and compressed air, the polypropylene spunbond nonwovens with/without pro-oxidants displayed an extreme loss in mechanical properties and cracking on the surface cracking. Because the untreated spunbond nonwovens did not completely decompose, the next phase of the project examined the pre-treatment of gamma-irradiation or thermal aging prior to composting. After exposure to gamma-irradiation and thermal aging, polypropylene is subjected to oxidative degradation in the presence of air and during storage after irradiat ion. Similar to photo-oxidation, the mechanism of gamma radiation and thermal oxidative degradation is fundamentally free radical in nature. In Chapter 3, the compostability of thermal aged spunbond polypropylene nonwovens with/without pro-oxidant additives. The FTIR spectrum confirmed oxidat ion of the polypropylene nonwovens with/without additives. Cracking on both the pro-oxidant and control spunbond nonwovens was showed by SEM imaging. Spunbond polypropylene nonwovens with/without pro-oxidants were also preirradiated by gamma rays followed by composting. Nonwovens with/without pro-oxidants were severely degraded by gamma-irradiation after up to 20 kGy exposure as explained in Chapter 4. Furthermore (Chapter 5), gamma

  3. Biodegradable plastics from renewable sources.

    Science.gov (United States)

    Flieger, M; Kantorová, M; Prell, A; Rezanka, T; Votruba, J

    2003-01-01

    Plastic waste disposal is a huge ecotechnological problem and one of the approaches to solving this problem is the development of biodegradable plastics. This review summarizes data on their use, biodegradability, commercial reliability and production from renewable resources. Some commercially successful biodegradable plastics are based on chemical synthesis (i.e. polyglycolic acid, polylactic acid, polycaprolactone, and polyvinyl alcohol). Others are products of microbial fermentations (i.e. polyesters and neutral polysaccharides) or are prepared from chemically modified natural products (e.g., starch, cellulose, chitin or soy protein).

  4. Lung toxicity of biodegradable nanoparticles.

    Science.gov (United States)

    Fattal, Elias; Grabowski, Nadége; Mura, Simona; Vergnaud, Juliette; Tsapis, Nicolas; Hillaireau, Hervé

    2014-10-01

    Biodegradable nanoparticles exhibit high potentialities for local or systemic drug delivery through lung administration making them attractive as nanomedicine carriers. However, since particulate matter or some inorganic manufactured nanoparticles exposed to lung cells have provoked cytotoxic effects, inflammatory and oxidative stress responses, it becomes important to investigate nanomedicine toxicity towards the lungs. This is the reason why, in the present review, the behavior of biodegradable nanoparticles towards the different parts of the respiratory tract as well as the toxicological consequences, measured on several models in vitro, ex vivo or in vivo, are described. Taken all together, the different studies carried out so far conclude on no or slight toxicity of biodegradable nanoparticles.

  5. Biodegradable micromechanical sensors

    DEFF Research Database (Denmark)

    Keller, Stephan Sylvest; Greve, Anders; Schmid, Silvan

    The development of biopolymers for food packaging, medical engineering or drug delivery is a growing field of research [1]. At the same time, the interest in methods for detailed analysis of biopolymers is increasing. Micromechanical sensors are versatile tools for the characterization of mechani......The development of biopolymers for food packaging, medical engineering or drug delivery is a growing field of research [1]. At the same time, the interest in methods for detailed analysis of biopolymers is increasing. Micromechanical sensors are versatile tools for the characterization...... of biopolymers to microfabrication is challenging, as these polymers are affected by common processes such as photolithography or wet etching. Here, we present two methods for fabrication of biodegradable micromechanical sensors. First, we fabricated bulk biopolymer microcantilevers using nanoimprint lithography...

  6. Biodegradation of propellant ingredients

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y.Z.; Sundaram, S.T.; Sharma, A. [Geo-centers, Inc., Lake Hopatcong, NJ (United States)] [and others

    1995-12-31

    This paper summarizes efforts to degrade nitrocellulose (NC) and nitroglycerin (NG) with fungi. Screening experiments were performed to determine the ability of mycelial fungi to biodegrade NC. The greatest amount of NC degradation was obtained with Sclerotium rolfsii ATCC 24459 and Fusarium solani IFO 31093. These fungi were then tested for NG degradation. It was found that the combined culture aerobically degraded 100% of the NG to form a mixture of 55% dinitroglycerin (DNG) and 5% of mononitroglycerin (MNG) in two days, with no further change observed afterward. In the presence of 1.2% glucose and 0.05% ammonium nitrate, NG was completely degraded in two days and a mixture of 20% DNG and 16% MNG was formed after 11 days. Based on these results, it appears that the combination of the fungi in a one to one ratio can be used to degrade both of these energetic compounds.

  7. Biomedical Applications of Biodegradable Polyesters

    OpenAIRE

    Iman Manavitehrani; Ali Fathi; Hesham Badr; Sean Daly; Ali Negahi Shirazi; Fariba Dehghani

    2016-01-01

    The focus in the field of biomedical engineering has shifted in recent years to biodegradable polymers and, in particular, polyesters. Dozens of polyester-based medical devices are commercially available, and every year more are introduced to the market. The mechanical performance and wide range of biodegradation properties of this class of polymers allow for high degrees of selectivity for targeted clinical applications. Recent research endeavors to expand the application of polymers have be...

  8. Biodegradable intestinal stents:A review

    Institute of Scientific and Technical Information of China (English)

    Zhanhui Wang; Nan Li; Rui Li; Yawei Li; Liqun Ruan

    2014-01-01

    Biodegradable stents are an attractive alternative to self-expanding metal stents in the treatment of intestinal strictures. Biodegradable stent can be made of biodegradable polymers and biodegradable metals (magnesium alloys). An overview on current biodegradable intestinal stents is presented. The future trends and perspectives in the development of biodegradable intestinal stents are proposed. For the biodegradable polymer intestinal stents, the clinical trials have shown promising results, although improved design of stents and reduced migration rate are expected. For the biodegradable magnesium intestinal stents, results of preliminary studies indicate magnesium alloys to have good biocompatibility. With many of the key fundamental and practical issues resolved and better methods for adjusting corrosion resistance and progressing biocompatibilities of magnesium alloys, it is possible to use biodegradable intestinal stents made of magnesium alloys in hospital in the not too distant future.

  9. Progress of biodegradable metals

    Institute of Scientific and Technical Information of China (English)

    Huafang Li; Yufeng Zheng; Ling Qin

    2014-01-01

    Biodegradable metals (BMs) are metals and alloys expected to corrode gradually in vivo, with an appropriate host response elicited by released corrosion products, then dissolve completely upon fulfilling the mission to assist with tissue healing with no implant residues. In the present review article, three classes of BMs have been systematically reviewed, including Mg-based, Fe-based and Zn-based BMs. Among the three BM systems, Mg-based BMs, which now have several systems reported the successful of clinical trial results, are considered the vanguards and main force. Fe-based BMs, with pure iron and Fe–Mn based alloys as the most promising, are still on the animal test stage. Zn-based BMs, supposed to have the degradation rate between the fast Mg-based BMs and the slow Fe-based BMs, are a rising star with only several reports and need much further research. The future research and development direction for the BMs are proposed, based on the clinical requirements on controllable degradation rate, prolonged mechanical stability and excellent biocompat-ibility, by optimization of alloy composition design, regulation on microstructure and mechanical properties, and following surface modification.

  10. Progress of biodegradable metals

    Directory of Open Access Journals (Sweden)

    Huafang Li

    2014-10-01

    Full Text Available Biodegradable metals (BMs are metals and alloys expected to corrode gradually in vivo, with an appropriate host response elicited by released corrosion products, then dissolve completely upon fulfilling the mission to assist with tissue healing with no implant residues. In the present review article, three classes of BMs have been systematically reviewed, including Mg-based, Fe-based and Zn-based BMs. Among the three BM systems, Mg-based BMs, which now have several systems reported the successful of clinical trial results, are considered the vanguards and main force. Fe-based BMs, with pure iron and Fe–Mn based alloys as the most promising, are still on the animal test stage. Zn-based BMs, supposed to have the degradation rate between the fast Mg-based BMs and the slow Fe-based BMs, are a rising star with only several reports and need much further research. The future research and development direction for the BMs are proposed, based on the clinical requirements on controllable degradation rate, prolonged mechanical stability and excellent biocompatibility, by optimization of alloy composition design, regulation on microstructure and mechanical properties, and following surface modification.

  11. Biodegradation of polyethoxylated nonylphenols.

    Science.gov (United States)

    Ruiz, Yassellis; Medina, Luis; Borusiak, Margarita; Ramos, Nairalith; Pinto, Gilberto; Valbuena, Oscar

    2013-01-01

    Polyethoxylated nonylphenols, with different ethoxylation degrees (NPEO x ), are incorporated into many commercial and industrial products such as detergents, domestic disinfectants, emulsifiers, cosmetics, and pesticides. However, the toxic effects exerted by their degradation products, which are persistent in natural environments, have been demonstrated in several animal and invertebrate aquatic species. Therefore, it seems appropriate to look for indigenous bacteria capable of degrading native NPEO x and its derivatives. In this paper, the isolation of five bacterial strains, capable of using NPEO 15 , as unique carbon source, is described. The most efficient NPEO 15 degrader bacterial strains were identified as Pseudomonas fluorescens (strain Yas2) and Klebsiella pneumoniae (strain Yas1). Maximal growth rates were reached at pH 8, 27°C in a 5% NPEO 15 medium. The NPEO 15 degradation extension, followed by viscometry assays, reached 65% after 54.5 h and 134 h incubation times, while the COD values decreased by 95% and 85% after 24 h for the Yas1 and Yas2 systems, respectively. The BOD was reduced by 99% and 99.9% levels in 24 h and 48 h incubations. The viscosity data indicated that the NPEO 15 biodegradation by Yas2 follows first-order kinetics. Kinetic rate constant (k) and half life time (τ) for this biotransformation were estimated to be 0.0072 h(-1) and 96.3 h, respectively.

  12. Adhesion of biocompatible and biodegradable micropatterned surfaces

    NARCIS (Netherlands)

    Kaiser, J.S.; Kamperman, M.M.G.; Souza, E.J.; Schick, B.; Arzt, E.

    2011-01-01

    We studied the effects of pillar dimensions and stiffness of biocompatible and biodegradable micropatterned surfaces on adhesion on different compliant substrates. The micropatterned adhesives were based on biocompatible polydimethylsiloxane (PDMS) and biodegradable poly(lactic-co-glycolic) acid (PL

  13. Biodegradable congress 2012; Bioschmierstoff-Kongress 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Within the Guelzower expert discussions at 5th and 6th June, 2012 in Oberhausen (Federal Republic of Germany) the following lectures were held: (1) Promotion of biodegradable lubricants by means of research and development as well as public relations (Steffen Daebeler); (2) Biodegradable lubricants - An overview of the advantages and disadvantages of the engaged product groups (Hubertus Murrenhoff); (3) Standardization of biodegradable lubricants - CEN/DIN standard committees - state of the art (Rolf Luther); (4) Market research for the utilization of biodegradable lubricants and means of proof of sustainability (Norbert Schmitz); (5) Fields of application for high performance lubricants and requirements upon the products (Gunther Kraft); (6) Investigations of biodegradable lubricants in rolling bearings and gears (Christoph Hentschke); (7) Biodegradable lubricants in central lubrication systems Development of gears and bearings of offshore wind power installations (Reiner Wagner); (8) Investigations towards environmental compatibility of biodegradable lubricants used in offshore wind power installations (Tolf Schneider); (9) Development of glycerine based lubricants for the industrial metalworking (Harald Draeger); (10) Investigations and utilization of biodegradable oils as electroinsulation oils in transformers (Stefan Tenbohlen); (11) Operational behaviour of lubricant oils in vegetable oil operation and Biodiesel operation (Horst Hamdorf); (12) Lubrication effect of lubricating oil of the third generation (Stefan Heitzig); (13) Actual market development from the view of a producer of biodegradable lubricants (Frank Lewen); (14) Utilization of biodegradable lubricants in forestry harvesters (Guenther Weise); (15) New biodegradable lubricants based on high oleic sunflower oil (Otto Botz); (16) Integrated fluid concept - optimized technology and service package for users of biodegradable lubricants (Juergen Baer); (17) Utilization of a bio oil sensor to control

  14. Poly (3-Hydroxyalkanoates): Biodegradable Plastics

    OpenAIRE

    2013-01-01

    During the 1920’s, a polyester called poly (3-hydroxybutyrate) was discovered in bacterial cells. This compound, otherwise known as PHB, is part of a polyester family called polyhydroxyalkanoates (PHAs). Polyhydroxyalkanoates are used as an energy and carbon sto rage compound within certain bacterial cells. Polyhydroxyalkanoates (PHAs) are thermoplastic, biodegradable polyesters synthesized by some bacteria from rene...

  15. Biodegradable polymeric prodrugs of naltrexone

    NARCIS (Netherlands)

    Bennet, D.B.; Li, X.; Adams, N.W.; Kim, S.W.; Hoes, C.J.T.; Feijen, J.

    1991-01-01

    The development of a biodegradable polymeric drug delivery system for the narcotic antagonist naltrexone may improve patient compliance in the treatment of opiate addiction. Random copolymers consisting of the ¿-amino acids N5-(3-hydroxypropyl--glutamine and -leucine were synthesized with equimolar

  16. Biodegradation kinetics at low concentrations (

    DEFF Research Database (Denmark)

    Toräng, Lars; Albrechtsen, Hans-Jørgen; Nyholm, Niels

    2000-01-01

    Aerobic biodegradation of 2,4-dichlorophenoxyacetic acid (2,4-D) was studied in groundwater added sediment fines. At concentrations at or below 1 mu g/L of 2,4-D degradation kinetic was of true first order without significant growth of specific degraders and with half-life for mineralization...

  17. Biodegradable Pectin/clay Aerogels

    Science.gov (United States)

    Biodegradable, foamlike materials based on renewable pectin and sodium montmorillonite clay were fabricated through a simple, environmentally friendly freeze-drying process. Addition of multivalent cations (Ca2+ and Al3+) resulted in apparent crosslinking of the polymer, and enhancement of aerogel p...

  18. A kinetic model for predicting biodegradation.

    Science.gov (United States)

    Dimitrov, S; Pavlov, T; Nedelcheva, D; Reuschenbach, P; Silvani, M; Bias, R; Comber, M; Low, L; Lee, C; Parkerton, T; Mekenyan, O

    2007-01-01

    Biodegradation plays a key role in the environmental risk assessment of organic chemicals. The need to assess biodegradability of a chemical for regulatory purposes supports the development of a model for predicting the extent of biodegradation at different time frames, in particular the extent of ultimate biodegradation within a '10 day window' criterion as well as estimating biodegradation half-lives. Conceptually this implies expressing the rate of catabolic transformations as a function of time. An attempt to correlate the kinetics of biodegradation with molecular structure of chemicals is presented. A simplified biodegradation kinetic model was formulated by combining the probabilistic approach of the original formulation of the CATABOL model with the assumption of first order kinetics of catabolic transformations. Nonlinear regression analysis was used to fit the model parameters to OECD 301F biodegradation kinetic data for a set of 208 chemicals. The new model allows the prediction of biodegradation multi-pathways, primary and ultimate half-lives and simulation of related kinetic biodegradation parameters such as biological oxygen demand (BOD), carbon dioxide production, and the nature and amount of metabolites as a function of time. The model may also be used for evaluating the OECD ready biodegradability potential of a chemical within the '10-day window' criterion.

  19. UV photolysis for accelerating pyridine biodegradation.

    Science.gov (United States)

    Zhang, Yongming; Chang, Ling; Yan, Ning; Tang, Yingxia; Liu, Rui; Rittmann, Bruce E

    2014-01-01

    Pyridine, a nitrogen-containing heterocyclic compound, is slowly biodegradable, and coupling biodegradation with UV photolysis is a potential means to accelerate its biotransformation and mineralization. The initial steps of pyridine biodegradation involve mono-oxygenation reactions that have molecular oxygen and an intracellular electron carrier as cosubstrates. We employed an internal circulation baffled biofilm reactor for pyridine biodegradation following three protocols: direct biodegradation (B), biodegradation after photolysis (P+B), and biodegradation with succinic acid added (B+S). Succinic acid was the main UV-photolysis product from pyridine, and its catabolic oxidation generates internal electron carriers that may accelerate the initial steps of pyridine biodegradation. Compared with direct biodegradation of pyridine (B), the removal rate for the same concentration of photolyzed pyridine (P+B) was higher by 15 to 43%, depending on the initial pyridine concentrations (increasing through the range of 130 to 310 mg/L). Adding succinic acid alone (B+S) gave results similar to P+B, which supports that succinic acid was the main agent for accelerating the pyridine biodegradation rate. In addition, protocols P+B and B+S were similar in terms of increasing pyridine mineralization over 10 h: 84% and 87%, respectively, which were higher than with protocol B (72%). The positive impact of succinic acid-whether added directly or produced via UV photolysis-confirms that its catabolism, which produced intracellular electron carriers, accelerated the initial steps of pyridine biotransformation.

  20. Aerobic biodegradation of a nonylphenol polyethoxylate and toxicity of the biodegradation metabolites.

    Science.gov (United States)

    Jurado, Encarnación; Fernández-Serrano, Mercedes; Núñez-Olea, Josefa; Lechuga, Manuela

    2009-09-01

    In this paper a study was made of the biodegradation of a non-ionic surfactant, a nonylphenol polyethoxylate, in biodegradability tests by monitoring the residual surfactant matter. The influence of the concentration on the extent of primary biodegradation, the toxicity of biodegradation metabolites, and the kinetics of degradation were also determined. The primary biodegradation was studied at different initial concentrations: 5, 25 and 50 mg/L, (at sub-and supra-critical micelle concentration). The NPEO used in this study can be considered biodegradable since the primary biodegradation had already taken place (a biodegradation greater than 80% was found for the different initial concentration tested). The initial concentration affected the shape of the resulting curve, the mean biodegradation rate and the percentage of biodegradation reached (99% in less than 8 days at 5 mg/L, 98% in less than 13 days at 25 mg/L and 95% in 14 days at 50 mg/L). The kinetic model of Quiroga and Sales (1991) was applied to predict the biodegradation of the NPEO. The toxicity value was measured as EC(20) and EC(50). In addition, during the biodegradation process of the surfactant a toxicity analysis was made of the evolution of metabolites generated, confirming that the subproducts of the biodegradation process were more toxic than the original.

  1. BIODEGRADABLE COATING FROM AGATHIS ALBA

    Directory of Open Access Journals (Sweden)

    NORYAWATI MULYONO

    2012-11-01

    Full Text Available The adhesive property of copal makes it as a potential coating onto aluminum foil to replace polyethylene. This research aimed to develop copal-based coating. The coating was prepared by extracting the copal in ethyl acetate and dipping the aluminium foil in ethyl acetate soluble extract of copal. The characterization of coating included its thickness, weight, thermal and chemical resistance, and biodegradation. The results showed that the coating thickness and weight increased as the copal concentration and dipping frequency increased. Thermal resistance test showed that the coating melted after being heated at 110°C for 30 min. Copal-based coating wasresistant to acidic solution (pH 4.0, water, and coconut oil, but was deteriorated in detergent 1% (w/v and basic solution (pH 10.0. Biodegradability test using Pseudomonas aeruginosa showed weight reduction of 76.82% in 30 days.

  2. Biomedical Applications of Biodegradable Polyesters

    Directory of Open Access Journals (Sweden)

    Iman Manavitehrani

    2016-01-01

    Full Text Available The focus in the field of biomedical engineering has shifted in recent years to biodegradable polymers and, in particular, polyesters. Dozens of polyester-based medical devices are commercially available, and every year more are introduced to the market. The mechanical performance and wide range of biodegradation properties of this class of polymers allow for high degrees of selectivity for targeted clinical applications. Recent research endeavors to expand the application of polymers have been driven by a need to target the general hydrophobic nature of polyesters and their limited cell motif sites. This review provides a comprehensive investigation into advanced strategies to modify polyesters and their clinical potential for future biomedical applications.

  3. Anaerobic Biodegradation of Detergent Surfactants

    OpenAIRE

    Erich Jelen; Ute Merrettig-Bruns

    2009-01-01

    Detergent surfactantscan be found in wastewater in relevant concentrations. Most of them are known as ready degradable under aerobic conditions, as required by European legislation. Far fewer surfactants have been tested so far for biodegradability under anaerobic conditions. The natural environment is predominantly aerobic, but there are some environmental compartments such as river sediments, sub-surface soil layer and anaerobic sludge digesters of wastewater treatment plants which have str...

  4. Engineering Flame Retardant Biodegradable Nanocomposites

    Science.gov (United States)

    He, Shan; Yang, Kai; Guo, Yichen; Zhang, Linxi; Pack, Seongchan; Davis, Rachel; Lewin, Menahem; Ade, Harald; Korach, Chad; Kashiwagi, Takashi; Rafailovich, Miriam

    2013-03-01

    Cellulose-based PLA/PBAT polymer blends can potentially be a promising class of biodegradable nanocomposites. Adding cellulose fiber reinforcement can improve mechanical properties of biodegradable plastics, but homogeneously dispersing hydrophilic cellulose in the hydrophobic polymer matrix poses a significant challenge. We here show that resorcinol diphenyl phosphates (RDP) can be used to modify the surface energy, not only reducing phase separation between two polymer kinds but also allowing the cellulose particles and the Halloysite clay to be easily dispersed within polymer matrices to achieve synergy effect using melt blending. Here in this study we describe the use of cellulose fiber and Halloysite clay, coated with RDP surfactant, in producing the flame retardant polymer blends of PBAT(Ecoflex) and PLA which can pass the stringent UL-94 V0 test. We also utilized FTIR, SEM and AFM nanoindentation to elucidate the role RDP plays in improving the compatibility of biodegradable polymers, and to determine structure property of chars that resulted in composites that could have optimized mechanical and thermal properties. Supported by Garcia Polymer Center and NSF Foundation.

  5. A review of plastic waste biodegradation.

    Science.gov (United States)

    Zheng, Ying; Yanful, Ernest K; Bassi, Amarjeet S

    2005-01-01

    With more and more plastics being employed in human lives and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. This review looks at the technological advancement made in the development of more easily biodegradable plastics and the biodegradation of conventional plastics by microorganisms. Additives, such as pro-oxidants and starch, are applied in synthetic materials to modify and make plastics biodegradable. Recent research has shown that thermoplastics derived from polyolefins, traditionally considered resistant to biodegradation in ambient environment, are biodegraded following photo-degradation and chemical degradation. Thermoset plastics, such as aliphatic polyester and polyester polyurethane, are easily attacked by microorganisms directly because of the potential hydrolytic cleavage of ester or urethane bonds in their structures. Some microorganisms have been isolated to utilize polyurethane as a sole source of carbon and nitrogen source. Aliphatic-aromatic copolyesters have active commercial applications because of their good mechanical properties and biodegradability. Reviewing published and ongoing studies on plastic biodegradation, this paper attempts to make conclusions on potentially viable methods to reduce impacts of plastic waste on the environment.

  6. Biodegradation of high molecular weight polylactic acid

    Science.gov (United States)

    Stloukal, Petr; Koutny, Marek; Sedlarik, Vladimir; Kucharczyk, Pavel

    2012-07-01

    Polylactid acid seems to be an appropriate replacement of conventional non-biodegradable synthetic polymer primarily due to comparable mechanical, thermal and processing properties in its high molecular weight form. Biodegradation of high molecular PLA was studied in compost for various forms differing in their specific surface area. The material proved its good biodegradability under composting conditions and all investigated forms showed to be acceptable for industrial composting. Despite expectations, no significant differences in resulting mineralizations were observed for fiber, film and powder sample forms with different specific surface areas. The clearly faster biodegradation was detected only for the thin coating on porous material with high specific surface area.

  7. Study on biodegradable aromatic/aliphatic copolyesters

    Energy Technology Data Exchange (ETDEWEB)

    Yiwang Chen; Licheng Tan; Lie Chen; Yan, Yang; Xiaofeng Wang [Nanchang University, Nanchang (China). School of Materials Science and Engineering. Inst. of Polymer Materials]. E-mail: ywchen@ncu.edu.cn

    2008-04-15

    Progress on biodegradable aromatic/aliphatic copolyesters based on aliphatic and aromatic diacids, diols and ester monomers was reviewed. The aromatic/aliphatic copolyesters combined excellent mechanical properties with biodegradability. Physical properties and biodegradability of copolyesters varied with chain length of the aliphatic polyester segment and atacticity of copolyesters. The process ability of copolyesters could be improved significantly after incorporating a stiff chain segment through copolymerization of aliphatic polyesters with an aromatic liquid crystal element. The aromatic/aliphatic copolyesters as a new type of biodegradable materials could replace some general plastics in certain applications, namely biomedical and environmental friendly fields. (author)

  8. Biodegradable materials as foundry moulding sands binders

    Directory of Open Access Journals (Sweden)

    K. Major - Gabryś

    2015-07-01

    Full Text Available The aim of this article is to show the possibility of using biodegradable materials as part of the composition of foundry moulding and core sand binders. Research shows that moulding sands with biodegradable materials selected as binders are not only less toxic but are also better suited to mechanical reclamation than moulding sands with phenol-furfuryl resin. The use of biodegradable materials as additives to typical synthetic resins can result in their decreased toxicity and improved ability to reclamation as well as in accelerated biodegradation of binding material leftovers of mechanical reclamation.

  9. Here today, gone tomorrow: biodegradable soft robots

    Science.gov (United States)

    Rossiter, Jonathan; Winfield, Jonathan; Ieropoulos, Ioannis

    2016-04-01

    One of the greatest challenges to modern technologies is what to do with them when they go irreparably wrong or come to the end of their productive lives. The convention, since the development of modern civilisation, is to discard a broken item and then procure a new one. In the 20th century enlightened environmentalists campaigned for recycling and reuse (R and R). R and R has continued to be an important part of new technology development, but there is still a huge problem of non-recyclable materials being dumped into landfill and being discarded in the environment. The challenge is even greater for robotics, a field which will impact on all aspects of our lives, where discards include motors, rigid elements and toxic power supplies and batteries. One novel solution is the biodegradable robot, an active physical machine that is composed of biodegradable materials and which degrades to nothing when released into the environment. In this paper we examine the potential and realities of biodegradable robotics, consider novel solutions to core components such as sensors, actuators and energy scavenging, and give examples of biodegradable robotics fabricated from everyday, and not so common, biodegradable electroactive materials. The realisation of truly biodegradable robots also brings entirely new deployment, exploration and bio-remediation capabilities: why track and recover a few large non-biodegradable robots when you could speculatively release millions of biodegradable robots instead? We will consider some of these exciting developments and explore the future of this new field.

  10. Primary biodegradation of petroleum hydrocarbons in seawater

    Energy Technology Data Exchange (ETDEWEB)

    Comber, M.I.H.; Den Haan, K.H.; Djemel, N.; Eadsforth, C.V.; King, D.; Paumen, M.L.; Parkerton, T.; Dmytrasz, B.

    2012-12-15

    This report describes primary biodegradation experiments performed to determine the persistence of higher molecular weight petroleum hydrocarbons in seawater. Results from the biodegradation experiments show that the majority of tested petroleum hydrocarbons have half-lives in seawater less than 60 days.

  11. Biodegradation of aliphatic and aromatic polycarbonates.

    Science.gov (United States)

    Artham, Trishul; Doble, Mukesh

    2008-01-01

    Polycarbonate is one of the most widely used engineering plastics because of its superior physical, chemical, and mechanical properties. Understanding the biodegradation of this polymer is of great importance to answer the increasing problems in waste management of this polymer. Aliphatic polycarbonates are known to biodegrade either through the action of pure enzymes or by bacterial whole cells. Very little information is available that deals with the biodegradation of aromatic polycarbonates. Biodegradation is governed by different factors that include polymer characteristics, type of organism, and nature of pretreatment. The polymer characteristics such as its mobility, tacticity, crystallinity, molecular weight, the type of functional groups and substituents present in its structure, and plasticizers or additives added to the polymer all play an important role in its degradation. The carbonate bond in aliphatic polycarbonates is facile and hence this polymer is easily biodegradable. On the other hand, bisphenol A polycarbonate contains benzene rings and quaternary carbon atoms which form bulky and stiff chains that enhance rigidity. Even though this polycarbonate is amorphous in nature because of considerable free volume, it is non-biodegradable since the carbonate bond is inaccessible to enzymes because of the presence of bulky phenyl groups on either side. In order to facilitate the biodegradation of polymers few pretreatment techniques which include photo-oxidation, gamma-irradiation, or use of chemicals have been tested. Addition of biosurfactants to improve the interaction between the polymer and the microorganisms, and blending with natural or synthetic polymers that degrade easily, can also enhance the biodegradation.

  12. Nylon biodegradation by lignin-degrading fungi.

    OpenAIRE

    Deguchi, T; Kakezawa, M; Nishida, T

    1997-01-01

    The biodegradation of nylon by lignin-degrading fungi was investigated. The fungus IZU-154 significantly degraded nylon-66 membrane under ligninolytic conditions. Nuclear magnetic resonance analysis showed that four end groups, CHO, NHCHO, CH3, and CONH2, were formed in the biodegraded nylon-66 membranes, suggesting that nylon-66 was degraded oxidatively.

  13. Biodegradation of Crystal Violet by Agrobacterium radiobacter

    DEFF Research Database (Denmark)

    Parshetti, G.K.; Parshetti, S.G.; Telke, A.A.

    2011-01-01

    and phenol. We proposed the hypothetical metabolic pathway of Crystal Violet biodegradation by A. radiobacter. Phytotoxicity and microbial toxicity study showed that Crystal Violet biodegradation metabolites were less toxic to bacteria (A. radiobacter, P. aurugenosa and A. vinelandii) contributing to soil...

  14. Current trends in biodegradable polyhydroxyalkanoates.

    Science.gov (United States)

    Chanprateep, Suchada

    2010-12-01

    The microbial polyesters known as polyhydroxyalkanoates (PHAs) positively impact global climate change scenarios by reducing the amount of non-degradable plastic used. A wide variety of different monomer compositions of PHAs has been described, as well as their future prospects for applications where high biodegradability or biocompatibility is required. PHAs can be produced from renewable raw materials and are degraded naturally by microorganisms that enable carbon dioxide and organic compound recycling in the ecosystem, providing a buffer to climate change. This review summarizes recent research on PHAs and addresses the opportunities as well as challenges for their place in the global market.

  15. Biodegradable polymers for electrospinning: towards biomedical applications.

    Science.gov (United States)

    Kai, Dan; Liow, Sing Shy; Loh, Xian Jun

    2014-12-01

    Electrospinning has received much attention recently due to the growing interest in nano-technologies and the unique material properties. This review focuses on recent progress in applying electrospinning technique in production of biodegradable nanofibers to the emerging field of biomedical. It first introduces the basic theory and parameters of nanofibers fabrication, with focus on factors affecting the morphology and fiber diameter of biodegradable nanofibers. Next, commonly electrospun biodegradable nanofibers are discussed, and the comparison of the degradation rate of nanoscale materials with macroscale materials are highlighted. The article also assesses the recent advancement of biodegradable nanofibers in different biomedical applications, including tissue engineering, drug delivery, biosensor and immunoassay. Future perspectives of biodegradable nanofibers are discussed in the last section, which emphasizes on the innovation and development in electrospinning of hydrogels nanofibers, pore size control and scale-up productions.

  16. Biodegradation and toxicological evaluation of lubricant oils

    Directory of Open Access Journals (Sweden)

    Ivo Shodji Tamada

    2012-12-01

    Full Text Available The aim of this work was to compare different toxicity levels of lubricant oils. The tests were performed using the earthworm (Eisenia andrei, arugula seeds (Eruca sativa and lettuce seeds (Lactuca sativa, with three types of contaminants (mineral lubricant oil, synthetic lubricant oil and used lubricant oil for various biodegradation periods in the soil. The toxicity tests indirectly measured the biodegradation of the contaminants. The samples were analyzed at t0, t60, t120 and t180 days of biodegradation. The used lubricant oil was proved very toxic in all the tests and even after biodegradation its toxicity was high. The mineral and synthetic oils were biodegraded efficiently in the soil although their toxicity did not disappear completely after 180 days.

  17. Intimately coupling of photolysis accelerates nitrobenzene biodegradation, but sequential coupling slows biodegradation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Lihui [Department of Environmental Science and Engineering, College of Life and Environmental Science, Shanghai Normal University, Shanghai 200234 (China); Zhang, Yongming, E-mail: zhym@shnu.edu.cn [Department of Environmental Science and Engineering, College of Life and Environmental Science, Shanghai Normal University, Shanghai 200234 (China); Bai, Qi; Yan, Ning; Xu, Hua [Department of Environmental Science and Engineering, College of Life and Environmental Science, Shanghai Normal University, Shanghai 200234 (China); Rittmann, Bruce E. [Swette Center for Environmental Biotechnology, Biodesign Institute, Arizona State University, Tempe, AZ 85287-5701 (United States)

    2015-04-28

    Highlights: • Intimately coupled UV photolysis accelerated nitrobenzene biodegradation. • NB biodegradation was slowed by accumulation of nitrophenol. • Oxalic acid was a key product of UV photolysis. • Oxalic acid accelerated biodegradation of nitrobenzene and nitrophenol by a co-substrate effect. • Intimate coupling of UV and biodegradation accentuated the benefits of oxalic acid. - Abstract: Photo(cata)lysis coupled with biodegradation is superior to photo(cata)lysis or biodegradation alone for removal of recalcitrant organic compounds. The two steps can be carried out sequentially or simultaneously via intimate coupling. We studied nitrobenzene (NB) removal and mineralization to evaluate why intimate coupling of photolysis with biodegradation was superior to sequential coupling. Employing an internal circulation baffled biofilm reactor, we compared direct biodegradation (B), biodegradation after photolysis (P + B), simultaneous photolysis and biodegradation (P&B), and biodegradation with nitrophenol (NP) and oxalic acid (OA) added individually and simultaneously (B + NP, B + OA, and B + NP + OA); NP and OA were NB’s main UV-photolysis products. Compared with B, the biodegradation rate P + B was lower by 13–29%, but intimately coupling (P&B) had a removal rate that was 10–13% higher; mineralization showed similar trends. B + OA gave results similar to P&B, B + NP gave results similar to P + B, and B + OA + NP gave results between P + B and P&B, depending on the amount of OA and NP added. The photolysis product OA accelerated NB biodegradation through a co-substrate effect, but NP was inhibitory. Although decreasing the UV photolysis time could minimize the inhibition impact of NP in P + B, P&B gave the fastest removal of NB by accentuating the co-substrate effect of OA.

  18. Biodegradable and compostable alternatives to conventional plastics.

    Science.gov (United States)

    Song, J H; Murphy, R J; Narayan, R; Davies, G B H

    2009-07-27

    Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers. The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all 'good' or petrochemical-based products are all 'bad'. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemical-based counterparts. Specific examples are given from new research on biodegradability in simulated 'home' composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted.

  19. Biodegradable Metals From Concept to Applications

    CERN Document Server

    Hermawan, Hendra

    2012-01-01

    This book in the emerging research field of biomaterials covers biodegradable metals for biomedical applications. The book contains two main parts where each of them consists of three chapters. The first part introduces the readers to the field of metallic biomaterials, exposes the state of the art of biodegradable metals, and reveals its application for cardiovascular implants. It includes some fundamental aspects to give basic understanding on metals for further review on the degradable ones is covered in chapter one. The second chapter introduces the concept of biodegradable metals, it's st

  20. Preparation and degradation mechanisms of biodegradable polymer: a review

    Science.gov (United States)

    Zeng, S. H.; Duan, P. P.; Shen, M. X.; Xue, Y. J.; Wang, Z. Y.

    2016-07-01

    Polymers are difficult to degrade completely in Nature, and their catabolites may pollute the environment. In recent years, biodegradable polymers have become the hot topic in people's daily life with increasing interest, and a controllable polymer biodegradation is one of the most important directions for future polymer science. This article presents the main preparation methods for biodegradable polymers and discusses their degradation mechanisms, the biodegradable factors, recent researches and their applications. The future researches of biodegradable polymers are also put forward.

  1. Engineered biosynthesis of biodegradable polymers.

    Science.gov (United States)

    Jambunathan, Pooja; Zhang, Kechun

    2016-08-01

    Advances in science and technology have resulted in the rapid development of biobased plastics and the major drivers for this expansion are rising environmental concerns of plastic pollution and the depletion of fossil-fuels. This paper presents a broad view on the recent developments of three promising biobased plastics, polylactic acid (PLA), polyhydroxyalkanoate (PHA) and polybutylene succinate (PBS), well known for their biodegradability. The article discusses the natural and recombinant host organisms used for fermentative production of monomers, alternative carbon feedstocks that have been used to lower production cost, different metabolic engineering strategies used to improve product titers, various fermentation technologies employed to increase productivities and finally, the different downstream processes used for recovery and purification of the monomers and polymers.

  2. Lubricant Biodegradation Enhancers:Designed Chemistry and Engineered Technology

    Institute of Scientific and Technical Information of China (English)

    Chen Boshui; Gao Lingyue; Fang Jianhua; Zhang Nan; Wu Jiang; Wang Jiu

    2015-01-01

    In recent decades, a growing worldwide trend of developing the biodegradable lubricants has been prevailing to form a speciifc ifeld of green chemistry and green engineering. Enhancement of biodegradability of unreadily biodegradable petroleum-based lubricants has as such become an urgent must. For over a decade the authors have been focusing on the im-provement of biodegradability of unreadily biodegradable lubricants such as petroleum-based lubricating oils and greases. A new idea of lubricant biodegradation enhancer was put forward by the authors with the aim to stimulate the biodegradation of unreadily biodegradable lubricants by incorporating the enhancer into the lubricants in order to turn the lubricants into greener biodegradable ones and to help in situ bioremediation of lubricant-contaminated environment. This manuscript sum-marizes our recent efforts relating to the chemistry and technology of biodegradation enhancers for lubricants. Firstly, the chemistry of lubricant biodegradation enhancers was designed based on the principles of bioremediation for the treatment of hydrocarbon contaminated environment. Secondly, the ability of the designed biodegradation enhancers for increasing the biodegradability of unreadily biodegradable industrial lubricants was investigated through biodegradability evaluation tests, microbial population analysis, and biodegradation kinetics modeling. Finally, the impact of biodegradation enhancers on some crucial performance characteristics of lubricants such as lubricity and oxidation stability was tested via tribological evaluation and oxidation determinations. Our results have shown that the designed chemistry of nitrogenous and/or phos-phorous compounds such as lauroyl glutamine, oleoyl glycine, oleic diethanolamide phosphate and lauric diethanolamide borate was outstanding in boosting biodegradation of petroleum-based lubricants which was ascribed to increase the micro-bial population and decrease the oil-water interfacial

  3. Phyllosphere yeasts rapidly break down biodegradable plastics.

    Science.gov (United States)

    Kitamoto, Hiroko K; Shinozaki, Yukiko; Cao, Xiao-Hong; Morita, Tomotake; Konishi, Masaaki; Tago, Kanako; Kajiwara, Hideyuki; Koitabashi, Motoo; Yoshida, Shigenobu; Watanabe, Takashi; Sameshima-Yamashita, Yuka; Nakajima-Kambe, Toshiaki; Tsushima, Seiya

    2011-11-29

    The use of biodegradable plastics can reduce the accumulation of environmentally persistent plastic wastes. The rate of degradation of biodegradable plastics depends on environmental conditions and is highly variable. Techniques for achieving more consistent degradation are needed. However, only a few microorganisms involved in the degradation process have been isolated so far from the environment. Here, we show that Pseudozyma spp. yeasts, which are common in the phyllosphere and are easily isolated from plant surfaces, displayed strong degradation activity on films made from poly-butylene succinate or poly-butylene succinate-co-adipate. Strains of P. antarctica isolated from leaves and husks of paddy rice displayed strong degradation activity on these films at 30°C. The type strain, P. antarctica JCM 10317, and Pseudozyma spp. strains from phyllosphere secreted a biodegradable plastic-degrading enzyme with a molecular mass of about 22 kDa. Reliable source of biodegradable plastic-degrading microorganisms are now in our hands.

  4. Transport of nonlinearly biodegradable contaminants in aquifers

    OpenAIRE

    Keijzer, H.

    2001-01-01

    This thesis deals with the transport behavior of nonlinearly biodegradable contaminants in aquifers. Such transport occurs during in situ bioremediation which is based on the injection of an electron acceptor or electron donor. The main interests in this thesis are the mutual influences of underlying processes, i.e. transport, adsorption and biodegradation, and their influence on in situ bioremediation performance. To gain insight in these influences, the processes in a homogeneous aquifer ar...

  5. Ball Powder Production Wastewater Biodegradation Support Studies

    Science.gov (United States)

    1989-02-01

    Any unusual removal criteria (NO3, toxic compound, etc.): * None 9 Type of wastewater treated: Dairy ( whey and grease) 1 Design basis for scale-up... WASTEWATER BIODEGRADATION SUPPORT STUDIES (TASK ORDER NO. 11) February 1989 Contract No. DAAK11-85-D-0008 w MAR 2 9 1983 Prepared by: Arthur D...United States Army Toxic and Hazardous Materials Agency February 1989 I Ball Powder Production Wastewater Pilot-Scale £ Biodegradation Support Studies I

  6. Biodegradability of Chlorinated Anilines in Waters

    Institute of Scientific and Technical Information of China (English)

    CHAO WANG; GUAN-GHUA LU; YAN-JIE ZHOU

    2007-01-01

    Objective To identify the bacteria tolerating chlorinated anilines and to study the biodegradability of o-chloroaniline and its coexistent compounds. Methods Microbial community of complex bacteria was identified by plate culture observation techniques and Gram stain method. Bacterial growth inhibition test was used to determine the tolerance of complex bacteria to toxicant. Biodegradability of chlorinated anilines was determined using domesticated complex bacteria as an inoculum by shaking-flask test. Results The complex bacteria were identified, consisting of Xanthomonas, Bacillus alcaligenes,Acinetobacter, Pseudomonas, and Actinomycetaceae nocardia. The obtained complex bacteria were more tolerant to o-chloroaniline than mixture bacteria in natural river waters. The effects of exposure concentration and inoculum size on the biodegradability of o-chloroaniline were analyzed, and the biodegradation characteristics of single o-chloroaniline and 2,4-dichloroaniline were compared with the coexistent compounds. Conclusion The biodegradation rates can be improved by decreasing concentration of compounds and increasing inoculum size of complex bacteria. When o-chloroaniline coexists with aniline, the latter is biodegraded prior to the former, and as a consequence the metabolic efficiency of o-chloroaniline is improved with the increase of aniline concentration. Meanwhile, when o-chloroaniline coexists with 2,4-dichloroaniline, the metabolic efficiency of 2,4-dichloroaniline is markedly improved.

  7. Immersed multilayer biodegradable ureteral stent with reformed biodegradation: An in vitro experiment.

    Science.gov (United States)

    Yang, Ganggang; Xie, Hua; Huang, Yichen; Lv, Yiqing; Zhang, Mingqing; Shang, Yafeng; Zhou, Junmei; Wang, Liping; Wang, Jin-Ye; Chen, Fang

    2017-03-01

    Objective The aim of this study was to develop a novel immersed multilayer biodegradable ureteral stent with reformed biodegradation and evaluate it in vitro. Methods Poly(glycolic-co-lactic acid) (PGLA), microsphere zein and BaSO4 were employed to produce a multilayer biodegradable stent using immersion technology. Tests of the biodegradable stents and conventional control stents were conducted in human urine in vitro to evaluate the biodegradable properties. The biocompatibility was assessed by the morphology and proliferation of urine-derived cells cultured with extracted media from the biodegradable stent and a latex material positive control. Results An immersed multilayer biodegradable stent was successfully produced. It began to degrade in week 2 and was fully degraded by week 4. The mass loss ratio in the first 2 weeks was low (approximately 10.0% at 1 week, 20.0% at 2 weeks) and increased after 3 weeks (approximately 70%) to the end of testing. During the first 2 weeks, the radial compression load performances of the biodegradable stents were better than those of the control stents with statistically significant differences ( p = 0.00, p = 0.01) and the tensile strengths were lower in the biodegradable stents than those in the control stents throughout the experiment. SEM showed that the stents degraded layer by layer from the outer to the inner wall. The influences on the cells of extracted medium from the biodegradable stents were morphologically slight and lower than 10% in relative growth rates. Conclusions This preliminary study demonstrates that the immersed multilayer biodegradable ureteral stent has good radial compression and biocompatible performance and can be degraded in vitro within 4 weeks in a moderate manner.

  8. Biomechanical Challenges to Polymeric Biodegradable Stents.

    Science.gov (United States)

    Soares, Joao S; Moore, James E

    2016-02-01

    Biodegradable implants have demonstrated clinical success in simple applications (e.g., absorbable sutures) and have shown great potential in many other areas of interventional medicine, such as localized drug delivery, engineered tissue scaffolding, and structural implants. For endovascular stenting and musculoskeletal applications, they can serve as temporary mechanical support that provides a smooth stress-transfer from the degradable implant to the healing tissue. However, for more complex device geometries, in vivo environments, and evolving load-bearing functions, such as required for vascular stents, there are considerable challenges associated with the use of biodegradable materials. A biodegradable stent must restore blood flow and provide support for a predictable appropriate period to facilitate artery healing, and subsequently, fail safely and be absorbed in a controllable manner. Biodegradable polymers are typically weaker than metals currently employed to construct stents, so it is difficult to ensure sufficient strength to keep the artery open and alleviate symptoms acutely while keeping other design parameters within clinically acceptable ranges. These design challenges are serious, given the general lack of understanding of biodegradable polymer behavior and evolution in intimal operating conditions. The modus operandi is mainly empirical and relies heavily on trial-and-error methodologies burdened by difficult, resource-expensive, and time-consuming experiments. We are striving for theoretical advancements systematizing the empirical knowledge into rational frameworks that could be cast into in silico tools for simulation and product development optimization. These challenges are evident when one considers that there are no biodegradable stents on the US market despite more than 30 years of development efforts (and currently only a couple with CE mark). This review summarizes previous efforts at implementing biodegradable stents, discusses the

  9. Biodegradable compounds: Rheological, mechanical and thermal properties

    Science.gov (United States)

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  10. Development of mold for biodegradable materials

    Energy Technology Data Exchange (ETDEWEB)

    Japitana, F.H.; Jabrica, A.M. [Metals Industry Research and Develeopment Center, Manila (Philippines). Dept. of Science and Technology; Komatsu, M. [Komatsu Consulting Engineer Office, Iwaki City, Fukushima (Japan); Takeuchi, Y. [Osaka Univ., Osaka (Japan). Dept. of Mechanical Engineering

    2008-07-01

    The improper disposal of non-biodegradable plastics adversely affect global environmental factors, principles of sustainability, industrial ecology and ecoefficiency. Therefore, a new generation of bio-based polymeric products has been developed. These polylactides (PLA), cellulose esters, starch plastics and polyhydroxyalkanoates (PHAs) are made from renewable natural resources and are biodegradable. They meet environmental conditions and can compete with their petrochemical counterparts. Among them, PLA is particularly attractive as a sustainable alternative to synthetic polymers and a potential candidate for the fabrication of biocomposites. Certain blends have proved successful in medical implants, sutures and drug delivery systems because of their capacity to dissolve away with time. However, widespread use of PLA is limited because of cost. Biodegradable plastic products are currently 6 to 10 times more expensive than traditional plastics. Environmentalists argue that the cheaper price of traditional plastics does not reflect their true cost when their impact is considered. This paper presented a solution to reduce the production cost of biodegradable plastics. In particular, it described a newly developed plastic injection mold for biodegradable materials which can produce a scrapless product. The system reduces processing time because it is not necessary to remove any gating or runners after the injection process. Takeout robots ensure that the quality of the product is maintained. 12 figs.

  11. Bio-Degradable Plastics Impact On Environment

    Directory of Open Access Journals (Sweden)

    T.SUBRAMANI

    2014-06-01

    Full Text Available The potential of biodegradable polymers and more particularly that of polymers obtained from renewable resources such as the polysaccharides (e.g., starch have long been recognized. However, these biodegradable polymers have been largely used in some applications (e.g., food industry and have not found extensive applications in the packaging industries to replace conventional plastic materials, although they could be an interesting way to overcome the limitation of the petrochemical resources in the future. The fossil fuel and gas could be partially replaced by greener agricultural sources, which should participate in the reduction of CO2 emissions. Bio-based and biodegradable plastics can form the basis for environmentally preferable, sustainable alternative to current materials based exclusively on petroleum feed stocks. These bio-based materials offer value in the sustainability/life-cycle equation by being a part of the biological carbon cycle, especially as it relates to carbon-based polymeric materials such as plastics, water soluble polymers and other carbon based products like lubricants, biodiesel, and detergents. Identification and quantification of bio based content uses radioactive C-14 signature. Biopolymers are generally capable of being utilized by living matter (biodegraded, and so can be disposed in safe and ecologically sound ways through disposal processes (waste management like composting, soil application, and biological wastewater treatment. Single use, short-life, disposable products can be engineered to be bio-based and biodegradable.

  12. The effects of biodegradation on the compositions of aromatic hydrocarbons and maturity indicators in biodegraded oils from Liaohe Basin

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    By the aid of GC-MS technique,a series of sequentially biodegraded oils from Liaohe Basin have been analyzed. The results show that the concentrations and relative compositions of various aromatic compounds in the biodegraded crude oils will change with increasing biodegradation degree. The concentrations of alkyl naphthalenes,alkyl phenanthrenes,alkyl dibenzothiophene are decreased,and the concentration of triaromatic steroids will increase with increasing biodegradation degree in biodegraded oils. Those phenomena indicate that various aromatic compounds are more easily biodegraded by bacteria like other kinds of hydrocarbons such as alkanes,but different series of aromatic compounds have a varied ability to resistant to biodegradation. The ratios of dibenzothiophene to phenenthrene(DBTH/P) and methyl dibenzothiophene to methyl phenanthrene(MDBTH/MP) are related to the features of depositional environment for source rocks such as redox and ancient salinity. However,in biodegraded oils,the two ratios increase quickly with the increase of the biodegradation degree,indicating that they have lost their geochemical significance. In this case,they could not be used to evaluate the features of depositional environment. Methyl phenanthrene index,methyl phenanthrene ratio and methyl dibenzoyhiophene ratio are useful aromatic maturity indicators for the crude oils and the source rocks without vitrinite. But for biodegraded oils,those aromatic maturity indicators will be affected by biodegradation and decrease with the increase of the biodegradation degree. Therefore,those aromatic molecular maturity indicators could not be used for biodegraded oils.

  13. Biodegradability of degradable plastic waste.

    Science.gov (United States)

    Agamuthu, P; Faizura, Putri Nadzrul

    2005-04-01

    Plastic waste constitutes the third largest waste volume in Malaysian municipal solid waste (MSW), next to putrescible waste and paper. The plastic component in MSW from Kuala Lumpur averages 24% (by weight), whereas the national mean is about 15%. The 144 waste dumps in the country receive about 95% of the MSW, including plastic waste. The useful life of the landfills is fast diminishing as the plastic waste stays un-degraded for more than 50 years. In this study the compostability of polyethylene and pro-oxidant additive-based environmentally degradable plastics (EDP) was investigated. Linear low-density polyethylene (LLDPE) samples exposed hydrolytically or oxidatively at 60 degrees C showed that the abiotic degradation path was oxidative rather than hydrolytic. There was a weight loss of 8% and the plastic has been oxidized as shown by the additional carbonyl group exhibited in the Fourier transform infra red (FTIR) Spectrum. Oxidation rate seemed to be influenced by the amount of pro-oxidant additive, the chemical structure and morphology of the plastic samples, and the surface area. Composting studies during a 45-day experiment showed that the percentage elongation (reduction) was 20% for McD samples [high-density polyethylene, (HDPE) with 3% additive] and LL samples (LLDPE with 7% additive) and 18% reduction for totally degradable plastic (TDP) samples (HDPE with 3% additive). Lastly, microbial experiments using Pseudomonas aeroginosa on carbon-free media with degradable plastic samples as the sole carbon source, showed confirmatory results. A positive bacterial growth and a weight loss of 2.2% for degraded polyethylene samples were evident to show that the degradable plastic is biodegradable.

  14. Introduction of environmentally degradable parameters to evaluate the biodegradability of biodegradable polymers.

    Directory of Open Access Journals (Sweden)

    Wenbin Guo

    Full Text Available Environmentally Degradable Parameter ((EdK is of importance in the describing of biodegradability of environmentally biodegradable polymers (BDPs. In this study, a concept (EdK was introduced. A test procedure of using the ISO 14852 method and detecting the evolved carbon dioxide as an analytical parameter was developed, and the calculated (EdK was used as an indicator for the ultimate biodegradability of materials. Starch and polyethylene used as reference materials were defined as the (EdK values of 100 and 0, respectively. Natural soil samples were inoculated into bioreactors, followed by determining the rates of biodegradation of the reference materials and 15 commercial BDPs over a 2-week test period. Finally, a formula was deduced to calculate the value of (EdK for each material. The (EdK values of the tested materials have a positive correlation to their biodegradation rates in the simulated soil environment, and they indicated the relative biodegradation rate of each material among all the tested materials. Therefore, the (EdK was shown to be a reliable indicator for quantitatively evaluating the potential biodegradability of BDPs in the natural environment.

  15. Biodegradable nanoparticles for gene therapy technology

    Energy Technology Data Exchange (ETDEWEB)

    Hosseinkhani, Hossein, E-mail: hosseinkhani@mail.ntust.edu.tw; He, Wen-Jie [National Taiwan University of Science and Technology (Taiwan Tech), Graduate Institute of Biomedical Engineering (China); Chiang, Chiao-Hsi [School of Pharmacy, National Defense Medical Center (China); Hong, Po-Da [National Taiwan University of Science and Technology (Taiwan Tech), Graduate Institute of Biomedical Engineering (China); Yu, Dah-Shyong [Nanomedicine Research Center, National Defense Medical Center (China); Domb, Abraham J. [The Hebrew University of Jerusalem, Institute of Drug Research, School of Pharmacy, Faculty of Medicine, Center for Nanoscience and Nanotechnology and The Alex Grass Center for Drug Design and Synthesis (Israel); Ou, Keng-Liang [College of Oral Medicine, Taipei Medical University, Research Center for Biomedical Devices and Prototyping Production (China)

    2013-07-15

    Rapid propagations in materials technology together with biology have initiated great hopes in the possibility of treating many diseases by gene therapy technology. Viral and non-viral gene carriers are currently applied for gene delivery. Non-viral technology is safe and effective for the delivery of genetic materials to cells and tissues. Non-viral systems are based on plasmid expression containing a gene encoding a therapeutic protein and synthetic biodegradable nanoparticles as a safe carrier of gene. Biodegradable nanoparticles have shown great interest in drug and gene delivery systems as they are easy to be synthesized and have no side effect in cells and tissues. This review provides a critical view of applications of biodegradable nanoparticles on gene therapy technology to enhance the localization of in vitro and in vivo and improve the function of administered genes.

  16. Biodegradable Materials for Bone Repairs: A Review

    Institute of Scientific and Technical Information of China (English)

    Lili Tan; Xiaoming Yu; Peng Wan; Ke Yang

    2013-01-01

    With attractive research and development of biomaterials,more and more opportunities have been brought to the treatments of human tissue repairs.The implant is usually no need to exist in the body accompanied with the recovery or regeneration of the tissue lesions,and the long-term effect of exotic substance to human body should be reduced as lower as possible.For this purpose,biodegradable materials,including polymers,magnesium alloys and ceramics,have attracted much attention for medical applications due to their biodegradable characters in body environment.This paper in turn introduces these three different types of widely studied biodegradable materials as well as their advantages as implants in applications for bone repairs.Relevant history and research progresses are summarized.

  17. Novel biodegradable nanocarriers for enhanced drug delivery.

    Science.gov (United States)

    Gagliardi, Mariacristina

    2016-12-01

    With the refinement of functional properties, the interest around biodegradable materials, in biorelated applications and, in particular, in their use as controlled drug-delivery systems, increased in the last decades. Biodegradable materials are an ideal platform to obtain nanoparticles for spatiotemporal controlled drug delivery for the in vivo administration, thanks to their biocompatibility, functionalizability, the control exerted on delivery rates and the complete degradation. Their application in systems for cancer treatment, brain and cardiovascular diseases is already a consolidated practice in research, while the bench-to-bedside translation is still late. This review aims at summarizing reported applications of biodegradable materials to obtain drug-delivery nanoparticles in the last few years, giving a complete overview of pros and cons related to degradable nanomedicaments.

  18. Biodegradable Hybrid Stomatocyte Nanomotors for Drug Delivery.

    Science.gov (United States)

    Tu, Yingfeng; Peng, Fei; André, Alain A M; Men, Yongjun; Srinivas, Mangala; Wilson, Daniela A

    2017-02-28

    We report the self-assembly of a biodegradable platinum nanoparticle-loaded stomatocyte nanomotor containing both PEG-b-PCL and PEG-b-PS as a potential candidate for anticancer drug delivery. Well-defined stomatocyte structures could be formed even after incorporation of 50% PEG-b-PCL polymer. Demixing of the two polymers was expected at high percentage of semicrystalline poly(ε-caprolactone) (PCL), resulting in PCL domain formation onto the membrane due to different properties of two polymers. The biodegradable motor system was further shown to move directionally with speeds up to 39 μm/s by converting chemical fuel, hydrogen peroxide, into mechanical motion as well as rapidly delivering the drug to the targeted cancer cell. Uptake by cancer cells and fast doxorubicin drug release was demonstrated during the degradation of the motor system. Such biodegradable nanomotors provide a convenient and efficient platform for the delivery and controlled release of therapeutic drugs.

  19. Biodegradation of resorcinol by Pseudomonas sp.

    Directory of Open Access Journals (Sweden)

    Nader Hajizadeh

    2016-11-01

    Full Text Available Objective: To investigate the ability of Pseudomonas sp. isolated from East Azarbaijan, Iran in bioremediation of resorcinol. Methods: Resorcinol biodegradation was evaluated using spectrophotometry and confirmed by gas chromatography-mass spectroscopy. Results: This isolate was able to remove up to 37.12% of resorcinol from contaminated water. Reusability experiments had confirmed the biodegradation process which produced seven intermediate compounds. These intermediates were characterized by gas chromatographymass spectroscopy technique. The products of resorcinol biodegradation were apparently 1, 4-cyclohexadiene, nonadecene, 2-heptadecanone, 1-isopropyl-2-methoxy-4-methylbenzene, hexadecanoic acid, 9-octadecenoic acid, phenol and 5-methyl-2-(1-methylethyl. Conclusions: The findings revealed that Pseudomonas sp. is able to degrade resorcinol. Because of being an indigenous organism, this isolate is more compatible with the climate of the northwest region of Iran and possibly will be used for degradation of other similar aromatic compounds.

  20. Biodegradation of resorcinol byPseudomonas sp.

    Institute of Scientific and Technical Information of China (English)

    Nader Hajizadeh; Najibeh Shirzad; Ali Farzi; Mojtaba Salouti; Azra Momeni

    2016-01-01

    ABSTRACT Objective:To investigate the ability ofPseudomonas sp. isolated from East Azarbaijan, Iran in bioremediation of resorcinol. Methods: Resorcinol biodegradation was evaluated using spectrophotometry and confirmed by gas chromatography-mass spectroscopy. Results:This isolate was able to remove up to 37.12% of resorcinol from contaminated water. Reusability experiments had confirmed the biodegradation process which produced seven intermediate compounds. These intermediates were characterized by gas chromatography-mass spectroscopy technique. The products of resorcinol biodegradation were apparently 1, 4-cyclohexadiene, nonadecene, 2-heptadecanone, 1-isopropyl-2-methoxy-4-methylbenzene, hexadecanoic acid, 9-octadecenoic acid, phenol and 5-methyl-2-(1-methylethyl). Conclusions: The findings revealed thatPseudomonas sp. is able to degrade resorcinol. Because of being an indigenous organism, this isolate is more compatible with the climate of the northwest region of Iran and possibly will be used for degradation of other similar aromatic compounds.

  1. Biodegradation of malachite green by Ochrobactrum sp.

    Science.gov (United States)

    Vijayalakshmidevi, S R; Muthukumar, Karuppan

    2014-02-01

    This study presents the biodegradation of malachite green (MG), a triphenylmethane dye, using a novel microorganism isolated from textile effluent contaminated environment. The organism responsible for degradation was identified as Ochrobactrum sp JN214485 by 16S rRNA analysis. The effect of operating parameters such as temperature, pH, immobilized bead loading, and initial dye concentration on % degradation was studied, and their optimal values were found to be 30 °C, 6, 20 g/L and 100 mg/L, respectively. The analysis showed that the extracellular enzymes were responsible for the degradation. The biodegradation of MG was confirmed by UV-visible spectroscopic and FTIR analysis. The phytotoxicity test concluded that the degradation products were less toxic compared to MG. The kinetics of biodegradation was studied and the activation energy was found to be 10.65 kcal/mol.

  2. Biodegradable Polymers and Stem Cells for Bioprinting.

    Science.gov (United States)

    Lei, Meijuan; Wang, Xiaohong

    2016-04-29

    It is imperative to develop organ manufacturing technologies based on the high organ failure mortality and serious donor shortage problems. As an emerging and promising technology, bioprinting has attracted more and more attention with its super precision, easy reproduction, fast manipulation and advantages in many hot research areas, such as tissue engineering, organ manufacturing, and drug screening. Basically, bioprinting technology consists of inkjet bioprinting, laser-based bioprinting and extrusion-based bioprinting techniques. Biodegradable polymers and stem cells are common printing inks. In the printed constructs, biodegradable polymers are usually used as support scaffolds, while stem cells can be engaged to differentiate into different cell/tissue types. The integration of biodegradable polymers and stem cells with the bioprinting techniques has provided huge opportunities for modern science and technologies, including tissue repair, organ transplantation and energy metabolism.

  3. Biodegradable Polymers and Stem Cells for Bioprinting

    Directory of Open Access Journals (Sweden)

    Meijuan Lei

    2016-04-01

    Full Text Available It is imperative to develop organ manufacturing technologies based on the high organ failure mortality and serious donor shortage problems. As an emerging and promising technology, bioprinting has attracted more and more attention with its super precision, easy reproduction, fast manipulation and advantages in many hot research areas, such as tissue engineering, organ manufacturing, and drug screening. Basically, bioprinting technology consists of inkjet bioprinting, laser-based bioprinting and extrusion-based bioprinting techniques. Biodegradable polymers and stem cells are common printing inks. In the printed constructs, biodegradable polymers are usually used as support scaffolds, while stem cells can be engaged to differentiate into different cell/tissue types. The integration of biodegradable polymers and stem cells with the bioprinting techniques has provided huge opportunities for modern science and technologies, including tissue repair, organ transplantation and energy metabolism.

  4. Histological evaluation of different biodegradable and non-biodegradable membranes implanted subcutaneously in rats

    DEFF Research Database (Denmark)

    Zhao, S; Pinholt, E M; Madsen, J E

    2000-01-01

    Different types of biodegradable membranes have become available for guided tissue regeneration. The purpose of this study was to evaluate histologically three different biodegradable membranes (Bio-Gide, Resolut and Vicryl) and one non-biodegradable membrane (expanded polytetrafluoroethylene/e-PTFE...... that e-PTFE was well tolerated and encapsulated by a fibrous connective tissue capsule. There was capsule formation around Resolut and Vicryl and around Bio-Gide in the early phase there was a wide inflammatory zone already. e-PTFE and Vicryl were stable materials while Resolut and Bio-Gide fragmented...

  5. Biodegradable polyesters based on succinic acid

    Directory of Open Access Journals (Sweden)

    Nikolić Marija S.

    2003-01-01

    Full Text Available Two series of aliphatic polyesters based on succinic acid were synthesized by copolymerization with adipic acid for the first series of saturated polyesters, and with fumaric acid for the second series. Polyesters were prepared starting from the corresponding dimethyl esters and 1,4-butanediol by melt transesterification in the presence of a highly effective catalyst tetra-n-butyl-titanate, Ti(0Bu4. The molecular structure and composition of the copolyesters was determined by 1H NMR spectroscopy. The effect of copolymer composition on the physical and thermal properties of these random polyesters were investigated using differential scanning calorimetry. The degree of crystallinity was determined by DSC and wide angle X-ray. The degrees of crystallinity of the saturated and unsaturated copolyesters were generally reduced with respect to poly(butylene succinate, PBS. The melting temperatures of the saturated polyesters were lower, while the melting temperatures of the unsaturated copolyesters were higher than the melting temperature of PBS. The biodegradability of the polyesters was investigated by enzymatic degradation tests. The enzymatic degradation tests were performed in a buffer solution with Candida cylindracea lipase and for the unsaturated polyesters with Rhizopus arrhizus lipase. The extent of biodegradation was quantified as the weight loss of polyester films. Also the surface of the polyester films after degradation was observed using optical microscopy. It could be concluded that the biodegradability depended strongly on the degree of crystallinity, but also on the flexibility of the chain backbone. The highest biodegradation was observed for copolyesters containing 50 mol.% of adipic acid units, and in the series of unsaturated polyesters for copolyesters containing 5 and 10 mol.% of fumarate units. Although the degree of crystallinity of the unsaturated polyesters decreased slightly with increasing unsaturation, the biodegradation

  6. Soluble Eggshell Mebrane Protein:Antibacterial Property and Biodegradability

    Institute of Scientific and Technical Information of China (English)

    YI Feng; YU Jian; LI Qiang; GUO Zhaoxia

    2007-01-01

    The antibacterial property and biodegradability of soluble eggshell membrane protein (SEP)are reported. Unlike the natural eggshell membrane (ESM), SEP does not possess antibacterial property against E.coli. The biodegradation tests with trypsin show that both ESM and SEP are biodegradable.

  7. Radiation crosslinking of Bionolle and its biodegradation

    Energy Technology Data Exchange (ETDEWEB)

    Suhartini, Meri; Mitomo, H. [Gunma Univ., Faculty of Engineering, Dept. of Biological and Chemical Engineering, Kiryu, Gunma (Japan); Nagasawa, Naotsugu; Yoshii, Fumio; Kume, Tamikazu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2002-03-01

    Biodegradable aliphatic polymer such as poly(butylene succinate) (Bionolle no.1001), poly(butylene succinate adipate copolymer) (Bionolle no.3001 and no.3020) were irradiated to give crosslinking structure in the presence of inorganic materials. Pure Bionolle no.1001, Bionolle no.3001 and no. 3020 have low gel fraction in radiation. These samples have high gel fraction by irradiation in the presence of silicon dioxide and carbon black, especially for Bionolle no.3001. Biodegradability of crosslinked Bionolle no.3001 evaluated by enzymatic and soil burial tests were accelerated by addition of inorganic materials. (author)

  8. Biodegradable containers from green waste materials

    Science.gov (United States)

    Sartore, Luciana; Schettini, Evelia; Pandini, Stefano; Bignotti, Fabio; Vox, Giuliano; D'Amore, Alberto

    2016-05-01

    Novel biodegradable polymeric materials based on protein hydrolysate (PH), derived from waste products of the leather industry, and poly(ethylene glycol) diglycidyl ether (PEG) or epoxidized soybean oil (ESO) were obtained and their physico-chemical properties and mechanical behaviour were evaluated. Different processing conditions and the introduction of fillers of natural origin, as saw dust and wood flour, were used to tailor the mechanical properties and the environmental durability of the product. The biodegradable products, which are almost completely manufactured from renewable-based raw materials, look promising for several applications, particularly in agriculture for the additional fertilizing action of PH or in packaging.

  9. Comparative study on the biodegradation and biocompatibility of silicate bioceramic coatings on biodegradable magnesium alloy as biodegradable biomaterial

    Science.gov (United States)

    Razavi, M.; Fathi, M. H.; Savabi, O.; Razavi, S. M.; Hashemibeni, B.; Yazdimamaghani, M.; Vashaee, D.; Tayebi, L.

    2014-03-01

    Many clinical cases as well as in vivo and in vitro assessments have demonstrated that magnesium alloys possess good biocompatibility. Unfortunately, magnesium and its alloys degrade too quickly in physiological media. In order to improve the biodegradation resistance and biocompatibility of a biodegradable magnesium alloy, we have prepared three types of coating include diopside (CaMgSi2O6), akermanite (Ca2MgSi2O6) and bredigite (Ca7MgSi4O16) coating on AZ91 magnesium alloy through a micro-arc oxidation (MAO) and electrophoretic deposition (EPD) method. In this research, the biodegradation and biocompatibility behavior of samples were evaluated in vitro and in vivo. The in vitro analysis was performed by cytocompatibility and MTT-assay and the in vivo test was conducted on the implantation of samples in the greater trochanter of adult rabbits. The results showed that diopside coating has the best bone regeneration and bredigite has the best biodegradation resistance compared to others.

  10. Biodegradability of leathers through anaerobic pathway.

    Science.gov (United States)

    Dhayalan, K; Fathima, N Nishad; Gnanamani, A; Rao, J Raghava; Nair, B Unni; Ramasami, T

    2007-01-01

    Leather processing generates huge amounts of both solid and liquid wastes. The management of solid wastes, especially tanned leather waste, is a challenging problem faced by tanners. Hence, studies on biodegradability of leather become imperative. In this present work, biodegradability of untanned, chrome tanned and vegetable tanned leather under anaerobic conditions has been addressed. Two different sources of anaerobes have been used for this purpose. The effect of detanning as a pretreatment method before subjecting the leather to biodegradation has also been studied. It has been found that vegetable tanned leather leads to more gas production than chrome tanned leather. Mixed anaerobic isolates when employed as an inoculum are able to degrade the soluble organics of vegetable tanned material and thus exhibit an increased level of gas production during the initial days, compared to the results of the treatments that received the anaerobic sludge. With chrome tanned materials, there was not much change in the volume of the gas produced from the two different sources. It has been found that detanning tends to improve the biodegradability of both types of leathers.

  11. Natural Biodegradation of Phenolic Compounds in Groundwater

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A combination of field data and theoretical approaches is used to assess the natural attenuation and status of a complex plume of phenolic compounds (phenol, cresols, xylenols) in a deep, consolidated, UK Permo-Triassic sandstone aquifer. Biodegradation of the phenolic compounds at concentrations up to 12500mg·L-1 is occurring under aerobic, NO-3-reducing, Mn/Fe-reducing, SO2-4-reducing and methanogenic conditions in the aquifer, with the accumulation of inorganic and organic metabolites in the plume. An electron and carbon balance for the plume suggests that only 6% of the source term has been degraded in 50 years. The residual contaminant mass in the plume significantly exceeds estimates of electron acceptor inputs, indicating that the plume will grow. Two detailed vertical profiles through the plume show that contaminant distributions are controlled more by source history than by biodegradation processes. Microbiological and mass balance studies show that biodegradation is greatest at the plume fringe where contaminant concentrations are diluted by transverse mixing. Active bacterial populations exist throughout the plume but biodegradation is inhibited in the plume core by high contaminant concentrations. Stable isotope studies show that SO2-4-reduction is particularly sensitive to contaminant concentration. The aquifer is not oxidant-deficient but natural attenuation of the phenolic compounds in this system is limited by toxicity from the pollutant load and the bioavailability of electron acceptors. Natural attenuation of these contaminants will increase only after increased dilution of the plume.

  12. Enhancement of 4-chlorophenol biodegradation using glucose

    Energy Technology Data Exchange (ETDEWEB)

    Tarighian, Alireza; Hill, Gordon; Headley, John [Division of Environmental Engineering, University of Saskatchewan, 105 Maintenance Road, S7N 5C5, Saskatoon, SK (Canada); Pedras, Soledad [Department of Chemistry, University of Saskatchewan, 110 Science Place, S7N 5C9, Saskatoon, SK (Canada)

    2003-03-01

    Toxic, xenobiotic chemicals present challenging problems for the environment since they are normally resistant to biodegradation. Sometimes it is possible to induce biodegradation activity by the use of growth cosubstrates. In this study, pure solutions and binary mixtures of glucose, phenol and 4-chlorophenol have been metabolized in batch cultures by a pure strain of Pseudomonas putida. Following a lag period during which slow growth and low production of biomass occurred, phenol was metabolized according to the Monod model. Glucose was also metabolized according to the Monod model but exponential growth commenced immediately after inoculation with no noticeable lag phase. Biokinetic behavior for growth on a mixture of phenol and glucose paralleled the behavior on individual substrates with simultaneous consumption of both substrates. 4-chlorophenol was not consumed as a sole substrate by Pseudomonas putida but was consumed as a cometabolite with either glucose or phenol acting as the primary growth cosubstrate. Surprisingly, glucose was found to be the superior growth cosubstrate, suggesting that inexpensive sugars can be used to enhance the biodegradation of chlorophenol-contaminated sites. Glucose and the excreted metabolic products of the biodegradation process, including a bright yellow pigment, demonstrated negligible toxicity towards Artemia salina, unlike the phenol and 4-chlorophenol substrates. (orig.)

  13. Transport of nonlinearly biodegradable contaminants in aquifers

    NARCIS (Netherlands)

    Keijzer, H.

    2001-01-01

    This thesis deals with the transport behavior of nonlinearly biodegradable contaminants in aquifers. Such transport occurs during in situ bioremediation which is based on the injection of an electron acceptor or electron donor. The main interests in this thesis are the mutual influences of underlyin

  14. Biodegradable polymersomes for targeted ultrasound imaging

    NARCIS (Netherlands)

    Zhou, W.; Meng, F.; Engbers, G.H.M.; Feijen, J.

    2006-01-01

    Biodegradable polymersomes with a sub-micron size were prepared by using poly(ethylene glycol)–polylactide (PEG–PDLLA) block-copolymers in aqueous media. Air-encapsulated polymersomes could be obtained by a lyophilization/rehydration procedure. Preliminary results showed that these polymersomes were

  15. Biodegradable elastomeric scaffolds for soft tissue engineering

    NARCIS (Netherlands)

    Pego, Ana Paula; Poot, André A.; Grijpma, Dirk W.; Feijen, Jan

    2003-01-01

    Elastomeric copolymers of 1,3-trimethylene carbonate (TMC) and ε-caprolactone (CL) and copolymers of TMC and D,L-lactide (DLLA) have been evaluated as candidate materials for the preparation of biodegradable scaffolds for soft tissue engineering. TMC-DLLA copolymers are amorphous and degrade more r

  16. Neuronal growth and differentiation on biodegradable membranes.

    Science.gov (United States)

    Morelli, Sabrina; Piscioneri, Antonella; Messina, Antonietta; Salerno, Simona; Al-Fageeh, Mohamed B; Drioli, Enrico; De Bartolo, Loredana

    2015-02-01

    Semipermeable polymeric membranes with appropriate morphological, physicochemical and transport properties are relevant to inducing neural regeneration. We developed novel biodegradable membranes to support neuronal differentiation. In particular, we developed chitosan, polycaprolactone and polyurethane flat membranes and a biosynthetic blend between polycaprolactone and polyurethane by phase-inversion techniques. The biodegradable membranes were characterized in order to evaluate their morphological, physicochemical, mechanical and degradation properties. We investigated the efficacy of these different membranes to promote the adhesion and differentiation of neuronal cells. We employed as model cell system the human neuroblastoma cell line SHSY5Y, which is a well-established system for studying neuronal differentiation. The investigation of viability and specific neuronal marker expression allowed assessment that the correct neuronal differentiation and the formation of neuronal network had taken place in vitro in the cells seeded on different biodegradable membranes. Overall, this study provides evidence that neural cell responses depend on the nature of the biodegradable polymer used to form the membranes, as well as on the dissolution, hydrophilic and, above all, mechanical membrane properties. PCL-PU membranes exhibit mechanical properties that improve neurite outgrowth and the expression of specific neuronal markers.

  17. Fabrication of Environmentally Biodegradable Lignin Nanoparticles

    NARCIS (Netherlands)

    Frangville, C.; Rutkevicius, M.; Richter, A.P.; Velev, O.D.; Stoyanov, S.D.; Paunov, V.N.

    2012-01-01

    We developed a method for the fabrication of novel biodegradable nanoparticles (NPs) from lignin which are apparently non-toxic for microalgae and yeast. We compare two alternative methods for the synthesis of lignin NPs which result in particles of very different stability upon change of pH. The fi

  18. Fate and biodegradability of sulfonated aromatic amines

    NARCIS (Netherlands)

    Tan, N.C.G.; Leeuwen, van A.; Voorthuizen, van E.M.; Slenders, P.; Prenafeta, F.X.; Temmink, H.; Lettinga, G.; Field, J.A.

    2005-01-01

    Ten sulfonated aromatic amines were tested for their aerobic and anaerobic biodegradability and toxicity potential in a variety of environmental inocula. Of all the compounds tested, only two aminobenzenesulfonic acid (ABS) isomers, 2- and 4-ABS, were degraded. The observed degradation occurred only

  19. Biodegradation of Guanidinium By Aquatic Microorganisms.

    Science.gov (United States)

    1985-12-01

    Linear Alkylbenzene Sulfonates . Appl. Microbiol. 30:922-929. 21. Pfaender, F.K. and G.W. Bartholomew. 1982. Measurement of Aquatic Biodegradation Rates by...incubation, after which time its disappearance became linear , and it could no longer be detected by the 20th day. Results for an identical water sample

  20. Biodegradation of acetanilide herbicides acetochlor and butachlor in soil.

    Science.gov (United States)

    Ye, Chang-ming; Wang, Xing-jun; Zheng, He-hui

    2002-10-01

    The biodegradation of two acetanilide herbicides, acetochlor and butachlor in soil after other environmental organic matter addition were measured during 35 days laboratory incubations. The herbicides were applied to soil alone, soil-SDBS (sodium dodecylbenzene sulfonate) mixtures and soil-HA (humic acid) mixtures. Herbicide biodegradation kinetics were compared in the different treatment. Biodegradation products of herbicides in soil alone samples were identified by GC/MS at the end of incubation. Addition of SDBS and HA to soil decreased acetochlor biodegradation, but increased butachlor biodegradation. The biodegradation half-life of acetochlor and butachlor in soil alone, soil-SDBS mixtures and soil-HA mixtures were 4.6 d, 6.1 d and 5.4 d and 5.3 d, 4.9 d and 5.3 d respectively. The biodegradation products were hydroxyacetochlor and 2-methyl-6-ethylaniline for acetochlor, and hydroxybutachlor and 2,6-diethylaniline for butachlor.

  1. Development of biodegradable materials; balancing degradability and performance

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, J.M.; Allen, A.L.; Dell, P.A.; McCassie, J.E.; Shupe, A.E.; Stenhouse, P.J. Stenhouse, Welch, E.A.; Kaplan, D.L. [Army Natick Research Development, MA (United States)

    1993-12-31

    The development of biodegradable materials suitable for packaging must take into consideration various performance criteria such as mechanical and barrier properties, as well as rate of biodegradability in given environments. Individual or blended biopolymer films were obtained commercially or blown into film in the laboratory and tested for tensile strength, ultimate elongation and oxygen barrier. These films were then subjected to accelerated marine biodegradation tests as well as simulated marine respirometry. Starch/ethylene vinyl alcohol films exhibited good mechanical and excellent oxygen barrier properties, but were very slow to biodegrade in the simulated and excellent oxygen barrier properties, but were very slow to biodegrade in the simulated marine environment. Polyhydroxyalkanoates had good mechanical properties, average oxygen barrier and good biodegradability. Data indicate that performance and biodegradability of packaging can be tailored to needs by combining individual biopolymers in different proportions in blends and laminates.

  2. [Biodegradable catheters and urinary stents. When?

    Science.gov (United States)

    Soria, F; Morcillo, E; López de Alda, A; Pastor, T; Sánchez-Margallo, F M

    2016-10-01

    One of the main wishes in the field of urinary catheters and stents is to arm them with biodegradable characteristics because we consider a failure of these devices the need for retrieval, the forgotten catheter syndrome as well as the adverse effects permanent devices cause after fulfilling their aim. The efforts focused in new designs, coatings and biomaterials aim to increase the biocompatibility of theses internal devices. Lately, there have been correct advances to answer the main challenges regarding biodegradable ureteral devices. Thus, modulation of the rate of degradation has been achieved thanks to new biomaterials and the use of copolymers that enable to choose the time of permanence as it is programmed with conventional double J catheters. Biocompatibility has improved with the use of new polymers that adapt better to the urine. Finally, one of the main problems is elimination of degraded fragments and experimentally it has be demonstrated that new designs elicit controlled degradation, from distal to proximal; using stranding and combination of copolymers degradation may be caused by dilution, reducing fragmentation to the last stages of life of the prosthesis. Moreover, it has been demonstrated that biodegradable catheters potentially may cause less urinary tract infection, less encrustation and predictably they will diminish catheter morbidity, since their degradation process reduces adverse effects. Regarding the development of biodegradable urethral stents, it is necessary to find biomaterials that enable maintaining their biomechanical properties in the long term, keeping open the urethral lumen both in patients with BPH and urethral stenosis. Modulation of the time of degradation of the prosthesis has been achieved, but the appearance of urothelial hyperplasia is still a constant in the initial phases after implantation. The development of drug eluting stents, anti-proliferative or anti-inflammatory, as well as biodegradable stents biocoated is a

  3. Biodegradability of biodegradable/degradable plastic materials under aerobic and anaerobic conditions.

    Science.gov (United States)

    Mohee, R; Unmar, G D; Mudhoo, A; Khadoo, P

    2008-01-01

    A study was conducted on two types of plastic materials, Mater-Bi Novamont (MB) and Environmental Product Inc. (EPI), to assess their biodegradability under aerobic and anaerobic conditions. For aerobic conditions, organic fractions of municipal solid wastes were composted. For the anaerobic process, anaerobic inoculum from a wastewater treatment plant was used. Cellulose filter papers (CFP) were used as a positive control for both mediums. The composting process was monitored in terms of temperature, moisture and volatile solids and the biodegradation of the samples were monitored in terms of mass loss. Monitoring results showed a biodegradation of 27.1% on a dry basis for MB plastic within a period of 72 days of composting. Biodegradability under an anaerobic environment was monitored in terms of biogas production. A cumulative methane gas production of 245 ml was obtained for MB, which showed good degradation as compared to CFP (246.8 ml). However, EPI plastic showed a cumulative methane value of 7.6 ml for a period of 32 days, which was close to the blank (4.0 ml). The EPI plastic did not biodegrade under either condition. The cumulative carbon dioxide evolution after 32 days was as follows: CFP 4.406 cm3, MB 2.198 cm3 and EPI 1.328 cm3. The cumulative level of CO2 varying with time fitted sigmoid type curves with R2 values of 0.996, 0.996 and 0.995 for CFP, MB and EPI, respectively.

  4. Biodegradation studies of rosin-based polymers.

    Science.gov (United States)

    Satturwar, P M; Mandaogade, P M; Darwhekar, G N; Fulzele, S V; Joshi, S B; Dorle, A K

    2003-07-01

    This study was designed to investigate two rosin-based polymers (R-1 and R-2) for their in vitro and in vivo biodegradation behavior. The in vitro hydrolytic degradation was carried out in buffer solutions of pH 4.4, 7.4, and 10.4 at 37 degrees C. Enzymatic degradation was studied using enzymes lipase, pancreatine, and pectinase. Free films of the two polymers were subcutaneously implanted in rabbits for the in vivo biodegradation. The extent of degradation was determined quantitatively by weight loss and was followed qualitatively by scanning electron microscopy. The extent and the rate of degradation was better in vivo than in vitro. The polymers showed poor enzymatic degradation and a highly pH-dependent hydrolytic degradation.

  5. Hydrocarbon biodegradation in intertidal wetland sediments.

    Science.gov (United States)

    McGenity, Terry J

    2014-06-01

    Intertidal wetlands, primarily salt marsh, mangrove and mudflats, which provide many essential ecosystem services, are under threat on numerous fronts; a situation that is made worse by crude-oil pollution. Microbes are the main vehicle for remediation of such sediments, and new discoveries, such as novel biodegradation pathways, means of accessing oil, multi-species interactions, and community-level responses to oil addition, are helping us to understand, predict and monitor the fate of oil. Despite this, there are many challenges, not least because of the heterogeneity of these ecosystems and the complexity of crude oil. For example, there is growing awareness about the toxicity of the oxygenated products that result from crude-oil weathering, which are difficult to degrade. This review highlights how developments in areas as diverse as systems biology, microbiology, ecology, biogeochemistry and analytical chemistry are enhancing our understanding of hydrocarbon biodegradation and thus bioremediation of oil-polluted intertidal wetlands.

  6. BIODEGRADATION OF REGENERATED CELLULOSE FILMS BY FUNGI

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lina; LIU Haiqing; ZHENG Lianshuang; ZHANG Jiayao; DU Yumin; LIU Weili

    1996-01-01

    The biodegradability of Aspergillus niger (A. niger), Mucor (M-305) and Trichoderma (T-311) strains on regenerated cellulose films in media was investigated. The results showed that T-311 strain isolated from soil adhered on the cellulose film fragments has stronger degradation effect on the cellulose film than A. niger strain. The weights, molecular weights and tensile strengths of the cellulose films in both shake culture and solid media decreased with incubation time, accompanied by producing CO2 and saccharides. HPLC, IR and released CO2 analysis indicated that the biodegradation products of the regenerated cellulose films mainly contain oligosaccharides, cellobiose, glucose, arabinose, erythrose, glycerose,glycerol, ethanal, formaldehyde and organic acid, the end products were CO2 and water.After a month, the films were completely decomposed by fungi in the media at 30℃.

  7. [Development of biodegradable magnesium-based biomaterials].

    Science.gov (United States)

    Zhu, Shengfa; Xu, Li; Huang, Nan

    2009-04-01

    Magnesium is a macroelement which is indispensable to human bodies. As a lightweight metal with high specific strength and favorable biocompatibility, magnesium and its alloys have been introduced in the field of biomedical materials research and have a broad application prospect. It is possible to develop new type of biodegradable medical magnesium alloys by use of the poor corrosion resistance of magnesium. Bioabsorbable magnesium stents implanted in vivo could mechanically support the vessel in a short term, effectly prevent the acute coronary occlusion and in-stent restenosis, and then be gradully biodegraded and completely absorbed in a long term. Osteoconductive bioactivity in magnesium-based alloys could promote the apposition growth of bone tissue. This paper reviews the progress of magnesium and its alloys applied in bone tissue and cardiovascular stents, and the prospect of the future research of magnesium-based biomaterials is discussed.

  8. Biodegradable foam plastics based on castor oil.

    Science.gov (United States)

    Wang, Hong Juan; Rong, Min Zhi; Zhang, Ming Qiu; Hu, Jing; Chen, Hui Wen; Czigány, Tibor

    2008-02-01

    In this work, a simple but effective approach was proposed for preparing biodegradable plastic foams with a high content of castor oil. First of all, castor oil reacted with maleic anhydride to produce maleated castor oil (MACO) without the aid of any catalyst. Then plastic foams were synthesized through free radical initiated copolymerization between MACO and diluent monomer styrene. With changes in MACO/St ratio and species of curing initiator, mechanical properties of MACO foams can be easily adjusted. In this way, biofoams with comparable compressive stress at 25% strain as commercial polyurethane (PU) foams were prepared, while the content of castor oil can be as high as 61 wt %. The soil burial tests further proved that the castor oil based foams kept the biodegradability of renewable resources despite the fact that some petrol-based components were introduced.

  9. Modeling ready biodegradability of fragrance materials.

    Science.gov (United States)

    Ceriani, Lidia; Papa, Ester; Kovarich, Simona; Boethling, Robert; Gramatica, Paola

    2015-06-01

    In the present study, quantitative structure activity relationships were developed for predicting ready biodegradability of approximately 200 heterogeneous fragrance materials. Two classification methods, classification and regression tree (CART) and k-nearest neighbors (kNN), were applied to perform the modeling. The models were validated with multiple external prediction sets, and the structural applicability domain was verified by the leverage approach. The best models had good sensitivity (internal ≥80%; external ≥68%), specificity (internal ≥80%; external 73%), and overall accuracy (≥75%). Results from the comparison with BIOWIN global models, based on group contribution method, show that specific models developed in the present study perform better in prediction than BIOWIN6, in particular for the correct classification of not readily biodegradable fragrance materials.

  10. Starch-based completely biodegradable polymer materials

    Directory of Open Access Journals (Sweden)

    2009-06-01

    Full Text Available Starch is a natural polymer which possesses many unique properties and some shortcoming simultaneously. Some synthetic polymers are biodegradable and can be tailor-made easily. Therefore, by combining the individual advantages of starch and synthetic polymers, starch-based completely biodegradable polymers (SCBP are potential for applications in biomedical and environmental fields. Therefore it received great attention and was extensively investigated. In this paper, the structure and characteristics of starch and some synthetic degradable polymers are briefly introduced. Then, the recent progress about the preparation of SCBP via physical blending and chemical modification is reviewed and discussed. At last, some examples have been presented to elucidate that SCBP are promising materials for various applications and their development is a good solution for reducing the consumption of petroleum resources and environmental problem.

  11. Catechol biodegradation kinetics using Candida parapsilopsis

    OpenAIRE

    Maurício Rigo; Ranulfo Monte Alegre; José Raniere Mazile Vidal Bezerra; Narjara Coelho; Reinaldo Gaspar Bastos

    2010-01-01

    This study evaluated the biodegradation of catechol by a yeast strain of Candida parapsilopsis in standard medium in Erlenmeyer flasks. Results shown that the highest concentration of catechol caused the longer lag period, demonstrating that acclimatized cultures could completely degrade an initial catechol concentration of 910 mg/L within 48 h. Haldane's model validated the experimental data adequately for growth kinetics over the studied catechol concentration ranges of 36 to 910 mg/L. The ...

  12. Kinetics of dimethoate biodegradation in bacterial system

    OpenAIRE

    Manisha DebMandal; Shyamapada Mandal; Nishith Kumar Pal

    2011-01-01

    The present study is an investigation on the kinetics of dimethoate biodegradation and an estimation of residual dimethoate in bacterial culture by spectrophotometry. The methylene chloride extract of the culture medium was used for determination of dimethoate through its reaction with 1 chloro-2, 4 dinitrobenzene to produce methylamine whose absorbance at 505 nm gave an estimation of dimethoate content. The dimethoate standard curve follows Beer’s law at 505 nm with a slope of 0.0129 absorba...

  13. Polymers from plants to develop biodegradable plastics.

    Science.gov (United States)

    Conrad, Udo

    2005-11-01

    Katrin Neumann et al. have recently shown that transgenic tobacco and potato plants can accumulate high levels of cyanophycin, a possible source for poly-aspartate. This work opens the way to the future production of biodegradable plastics using a plant-based production system. Several problems need to be overcome first, such as growth retardation as a result of cyanophycin accumulating in the cytosol, and a co-production system needs to be developed for economical reasons.

  14. Behaviour of biodegradable plastics in composting facilities.

    Science.gov (United States)

    Körner, I; Redemann, K; Stegmann, R

    2005-01-01

    Composting is a preferred treatment strategy for biodegradable plastics (BDPs). In this sense, the collection of BDPs together with organic household wastes is a highly discussed possibility. Under the aspect of the behaviour of BDPs in composting facilities, a telephone survey was carried out with selected composting facility operators. They were interviewed with respect to treated wastes, content of impurities, processes for impurity separation, experiences with biodegradable plastics and assumptions to the behaviour of biodegradable plastics in their facility. Forty percent of the facilities had some experiences with BDPs due to test runs, and also since the occurrence of BDPs in their waste was known. The majority of the operators expressed apprehension regarding an increase of impurities resulting from a combined collection of biowaste and BDPs. In the facilities, measures for the impurity separation from the biowaste were used in common practice - in 33% of the cases, separation of disturbing plastics was done before composting, in 33% after composting, and in 13% before and after composting. The most important separation processes for conventional plastics were sieving and manual sorting. In two cases air classification was also used. When asked about the separation possibility of the conventional but not of the biodegradable plastics in their facilities, the majority of operators were not in a position to comment or they replied that it was not an option. No problems were seen in most cases if the impurity separation follows composting. If impurity separation takes place before composting it was often assumed that the BDPs are mainly separated by sieving. In conclusion, in more than half of the cases, BDPs would not be composted if delivered to a composting facility. Under the actual conditions regarding the collection and the treatment/disposal possibilities, an application of BDPs seems to only be reasonable for clean (i.e., source separated on their own

  15. Fabrication of Biodegradable Polyester Nanocomposites by Electrospinning for Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Zhi-Cai Xing

    2011-01-01

    Full Text Available Recently, nanocomposites have emerged as an efficient strategy to upgrade the structural and functional properties of synthetic polymers. Polyesters have attracted wide attention because of their biodegradability and biocompatibility. A logic consequence has been the introduction of natural extracellular matrix (ECM molecules, organic or inorganic nanostructures to biodegradable polymers to produce nanocomposites with enhanced properties. Consequently, the improvement of the interfacial adhesion between biodegradable polymers and natural ECM molecules or nanostructures has become the key technique in the fabrication of nanocomposites. Electrospinning has been employed extensively in the design and development of tissue engineering scaffolds to generate nanofibrous substrates of synthetic biodegradable polymers and to simulate the cellular microenvironment. In this paper, several types of biodegradable polyester nanocomposites were prepared by electrospinning, with the aim of being used as tissue engineering scaffolds. The combination of biodegradable nanofibrous polymers and natural ECM molecules or nanostructures opens new paradigms for tissue engineering applications.

  16. Titanate nanotube coatings on biodegradable photopolymer scaffolds

    Energy Technology Data Exchange (ETDEWEB)

    Beke, S., E-mail: szabolcs.beke@iit.it [Department of Nanophysics, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova (Italy); Kőrösi, L. [Department of Biotechnology, Nanophage Therapy Center, Enviroinvest Corporation, Kertváros u. 2, H-7632, Pécs (Hungary); Scarpellini, A. [Department of Nanochemistry, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova (Italy); Anjum, F.; Brandi, F. [Department of Nanophysics, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova (Italy)

    2013-05-01

    Rigid, biodegradable photopolymer scaffolds were coated with titanate nanotubes (TNTs) by using a spin-coating method. TNTs were synthesized by a hydrothermal process at 150 °C under 4.7 bar ambient pressure. The biodegradable photopolymer scaffolds were produced by mask-assisted excimer laser photocuring at 308 nm. For scaffold coating, a stable ethanolic TNT sol was prepared by a simple colloid chemical route without the use of any binding compounds or additives. Scanning electron microscopy along with elemental analysis revealed that the scaffolds were homogenously coated by TNTs. The developed TNT coating can further improve the surface geometry of fabricated scaffolds, and therefore it can further increase the cell adhesion. Highlights: ► Biodegradable scaffolds were produced by mask-assisted UV laser photocuring. ► Titanate nanotube deposition was carried out without binding compounds or additives. ► The titanate nanotube coating can further improve the surface geometry of scaffolds. ► These reproducible platforms will be of high importance for biological applications.

  17. Bacterial production of the biodegradable plastics polyhydroxyalkanoates.

    Science.gov (United States)

    Urtuvia, Viviana; Villegas, Pamela; González, Myriam; Seeger, Michael

    2014-09-01

    Petroleum-based plastics constitute a major environmental problem due to their low biodegradability and accumulation in various environments. Therefore, searching for novel biodegradable plastics is of increasing interest. Microbial polyesters known as polyhydroxyalkanoates (PHAs) are biodegradable plastics. Life cycle assessment indicates that PHB is more beneficial than petroleum-based plastics. In this report, bacterial production of PHAs and their industrial applications are reviewed and the synthesis of PHAs in Burkholderia xenovorans LB400 is described. PHAs are synthesized by a large number of microorganisms during unbalanced nutritional conditions. These polymers are accumulated as carbon and energy reserve in discrete granules in the bacterial cytoplasm. 3-hydroxybutyrate and 3-hydroxyvalerate are two main PHA units among 150 monomers that have been reported. B. xenovorans LB400 is a model bacterium for the degradation of polychlorobiphenyls and a wide range of aromatic compounds. A bioinformatic analysis of LB400 genome indicated the presence of pha genes encoding enzymes of pathways for PHA synthesis. This study showed that B. xenovorans LB400 synthesize PHAs under nutrient limitation. Staining with Sudan Black B indicated the production of PHAs by B. xenovorans LB400 colonies. The PHAs produced were characterized by GC-MS. Diverse substrates for the production of PHAs in strain LB400 were analyzed.

  18. Water-curable and biodegradable prepolymers.

    Science.gov (United States)

    Kobayashi, H; Hyon, S H; Ikada, Y

    1991-12-01

    In an attempt to develop biodegradable polymers which can be shaped in situ and adhere to living tissues, we synthesized esterurethane prepolymers which can be cured upon contact with water in living tissues. First, D,L-lactide polymerization or D,L-lactide-epsilon-caprolactone (50:50) copolymerization was carried out using ethylene glycol or poly(ethylene glycol) as initiator to obtain hydroxyl-terminated biodegradable polyesters. They were then reacted with an excess of diisocyanate such as hexamethylene diisocyanate, toluylene diisocyanate, and diphenylmethane diisocyanate to introduce a reactive isocyanate group to both of the end groups of the polyesters. The isocyanate-terminated prepolymers could be cured in the presence of water and the cured polymers were degraded by hydrolysis both in vitro and in vivo. It was found that the presence of appropriate amounts of hydrophilic units in the main chain was essential for giving a high curing rate and a high degradation rate for the biodegradable urethane prepolymers. The tissue responses to the cured polymers were not severe.

  19. "Rational" management of dichlorophenols biodegradation by the microalga Scenedesmus obliquus.

    Science.gov (United States)

    Papazi, Aikaterini; Kotzabasis, Kiriakos

    2013-01-01

    The microalga Scenedesmus obliquus exhibited the ability to biodegrade dichlorophenols (dcps) under specific autotrophic and mixotrophic conditions. According to their biodegradability, the dichlorophenols used can be separated into three distinct groups. Group I (2,4-dcp and 2,6 dcp - no meta-substitution) consisted of quite easily degraded dichlorophenols, since both chloride substituents are in less energetically demanding positions. Group II (2,3-dcp, 2,5-dcp and 3,4-dcp - one meta-chloride) was less susceptible to biodegradation, since one of the two substituents, the meta one, required higher energy for C-Cl-bond cleavage. Group III (3,5-dcp - two meta-chlorides) could not be biodegraded, since both chlorides possessed the most energy demanding positions. In general, when the dcp-toxicity exceeded a certain threshold, the microalga increased the energy offered for biodegradation and decreased the energy invested for biomass production. As a result, the biodegradation per cell volume of group II (higher toxicity) was higher, than group I (lower toxicity) and the biodegradation of dichlorophenols (higher toxicity) was higher than the corresponding monochlorophenols (lower toxicity). The participation of the photosynthetic apparatus and the respiratory mechanism of microalga to biodegrade the group I and the group II, highlighted different bioenergetic strategies for optimal management of the balance between dcp-toxicity, dcp-biodegradability and culture growth. Additionally, we took into consideration the possibility that the intermediates of each dcp-biodegradation pathway could influence differently the whole biodegradation procedures. For this reason, we tested all possible combinations of phenolic intermediates to check cometabolic interactions. The present contribution bring out the possibility of microalgae to operate as "smart" bioenergetic "machines", that have the ability to continuously "calculate" the energy reserves and "use" the most energetically

  20. Degradation of Oxo-Biodegradable Plastic by Pleurotus ostreatus

    OpenAIRE

    José Maria Rodrigues da Luz; Sirlaine Albino Paes; Mateus Dias Nunes; Marliane de Cássia Soares da Silva; Maria Catarina Megumi Kasuya

    2013-01-01

    Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ul...

  1. Influence of inorganic salt on aerobic biodegradability of dyestuffs

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    this paper, the influence of inorganic salt on aerobic biodegradability of dyestuffs was studied by means of semicontinuous activated sludge method. It was found that: biodegradability of dyestuffs would decrease with the increase of the concentration of NaCl; however, biodegradability in the condition of NaCl = 30 g/L was better than that in the condition of NaCl =15 g/L; in the three NaCl conditions, biodegradability of tasted dyestuffs followed the following order: NaCl= 0 g/L > NaCl= 30g/L>NaCl= 15 g/L.

  2. Biodegradation of flax fiber reinforced poly lactic acid

    Directory of Open Access Journals (Sweden)

    2010-07-01

    Full Text Available Woven and nonwoven flax fiber reinforced poly lactic acid (PLA biocomposites were prepared with amphiphilic additives as accelerator for biodegradation. The prepared composites were buried in farmland soil for biodegradability studies. Loss in weight of the biodegraded composite samples was determined at different time intervals. The surface morphology of the biodegraded composites was studied with scanning electron microscope (SEM. Results indicated that in presence of mandelic acid, the composites showed accelerated biodegradation with 20–25% loss in weight after 50–60 days. On the other hand, in presence of dicumyl peroxide (as additive, biodegradation of the composites was relatively slow as confirmed by only 5–10% loss in weight even after 80–90 days. This was further confirmed by surface morphology of the biodegraded composites. We have attempted to show that depending on the end uses, we can add different amphiphilic additives for delayed or accelerated biodegradability. This work gives us the idea of biodegradation of materials from natural fiber reinforced PLA composites when discarded carelessly in the environment instead of proper waste disposal site.

  3. Silicon microneedles array with biodegradable tips for transdermal drug delivery

    CERN Document Server

    Chen, B; Tay, Francis; Wong, Y T; Iliescu, C

    2008-01-01

    This paper presents the fabrication process, characterization results and basic functionality of silicon microneedles array with biodegradable tips. In order to avoid the main problems related to silicon microneedles : broking of the top part of the needles inside the skin, a simple solution can be fabrication of microneedles array with biodegradable tips. The silicon microneedles array was fabricated by using reactive ion etching while the biodegradable tips were performed using and anodization process that generates selectively porous silicon only on the top part of the skin. The paper presents also the results of in vitro release of calcein using microneedles array with biodegradable tips

  4. ESTIMATION OF BIODEGRADATION AND BIO-CORROSION OF MATERIALS IN NATURAL ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    Varchenko E. A.

    2014-12-01

    Full Text Available The article analyzes the problems that arise when evaluating biodegradation of materials, items, structures and products in natural environments.. The causes of biodegradations are revealed

  5. Sociobiology of biodegradation and the role of predatory protozoa in biodegrading communities

    Indian Academy of Sciences (India)

    Tejashree Modak; Shalmali Pradhan; Milind Watve

    2007-06-01

    Predatory protozoa are known to enhance biodegradation by bacteria in a variety of systems including rumen. This is apparently counterintuitive since many protozoa do not themselves produce extracellular degradative enzymes and prey upon bacterial degraders. We propose a mechanism of protozoal enhancement of bacterial biodegradation based on the sociobiology of biodegradation. Since extracellular enzyme production by degraders involves a cost to the bacterial cell, cheaters that do not make the enzyme will have a selective advantage. In the presence of cheaters, degraders that physically attach to water-insoluble substrate will have a selective advantage over free-floating degraders. On the other hand, cheaters will benefit by being free floaters since they consume the solubilized products of extracellular enzymes. Predatory ciliated protozoa are more likely to consume free-floating cheaters. Thus, due to protozoan predation a control is exerted on the cheater population. We illustrate the dynamics of such a system with the help of a computer simulation model. Available data on rumen and other biodegradation systems involving protozoa are compatible with the assumptions and predictions of the model.

  6. Development of aliphatic biodegradable photoluminescent polymers

    Science.gov (United States)

    Yang, Jian; Zhang, Yi; Gautam, Santosh; Liu, Li; Dey, Jagannath; Chen, Wei; Mason, Ralph P.; Serrano, Carlos A.; Schug, Kevin A.; Tang, Liping

    2009-01-01

    None of the current biodegradable polymers can function as both implant materials and fluorescent imaging probes. The objective of this study was to develop aliphatic biodegradable photoluminescent polymers (BPLPs) and their associated cross-linked variants (CBPLPs) for biomedical applications. BPLPs are degradable oligomers synthesized from biocompatible monomers including citric acid, aliphatic diols, and various amino acids via a convenient and cost-effective polycondensation reaction. BPLPs can be further cross-linked into elastomeric cross-linked polymers, CBPLPs. We have shown representatively that BPLP-cysteine (BPLP-Cys) and BPLP-serine (BPLP-Ser) offer advantages over the traditional fluorescent organic dyes and quantum dots because of their preliminarily demonstrated cytocompatibility in vitro, minimal chronic inflammatory responses in vivo, controlled degradability and high quantum yields (up to 62.33%), tunable fluorescence emission (up to 725 nm), and photostability. The tensile strength of CBPLP-Cys film ranged from 3.25 ± 0.13 MPa to 6.5 ± 0.8 MPa and the initial Modulus was in a range of 3.34 ± 0.15 MPa to 7.02 ± 1.40 MPa. Elastic CBPLP-Cys could be elongated up to 240 ± 36%. The compressive modulus of BPLP-Cys (0.6) (1:1:0.6 OD:CA:Cys) porous scaffold was 39.60 ± 5.90 KPa confirming the soft nature of the scaffolds. BPLPs also possess great processability for micro/nano-fabrication. We demonstrate the feasibility of using BPLP-Ser nanoparticles (“biodegradable quantum dots”) for in vitro cellular labeling and noninvasive in vivo imaging of tissue engineering scaffolds. The development of BPLPs and CBPLPs represents a new direction in developing fluorescent biomaterials and could impact tissue engineering, drug delivery, bioimaging. PMID:19506254

  7. Biodegradation of polyester polyurethane by Aspergillus tubingensis.

    Science.gov (United States)

    Khan, Sehroon; Nadir, Sadia; Shah, Zia Ullah; Shah, Aamer Ali; Karunarathna, Samantha C; Xu, Jianchu; Khan, Afsar; Munir, Shahzad; Hasan, Fariha

    2017-03-15

    The xenobiotic nature and lack of degradability of polymeric materials has resulted in vast levels of environmental pollution and numerous health hazards. Different strategies have been developed and still more research is being in progress to reduce the impact of these polymeric materials. This work aimed to isolate and characterize polyester polyurethane (PU) degrading fungi from the soil of a general city waste disposal site in Islamabad, Pakistan. A novel PU degrading fungus was isolated from soil and identified as Aspergillus tubingensis on the basis of colony morphology, macro- and micro-morphology, molecular and phylogenetic analyses. The PU degrading ability of the fungus was tested in three different ways in the presence of 2% glucose: (a) on SDA agar plate, (b) in liquid MSM, and (c) after burial in soil. Our results indicated that this strain of A. tubingensis was capable of degrading PU. Using scanning electron microscopy (SEM), we were able to visually confirm that the mycelium of A. tubingensis colonized the PU material, causing surface degradation and scarring. The formation or breakage of chemical bonds during the biodegradation process of PU was confirmed using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy. The biodegradation of PU was higher when plate culture method was employed, followed by the liquid culture method and soil burial technique. Notably, after two months in liquid medium, the PU film was totally degraded into smaller pieces. Based on a comprehensive literature search, it can be stated that this is the first report showing A. tubingensis capable of degrading PU. This work provides insight into the role of A. tubingensis towards solving the dilemma of PU wastes through biodegradation.

  8. [Biodegradation of pyridine under UV irradiation].

    Science.gov (United States)

    Fang, Miao-Miao; Yan, Ning; Zhang, Yong-Ming

    2012-02-01

    Pyridine, a complex nitrogen-containing heterocyclic compounds, is usually difficult to degrade by means of single biological method. The internal loop photobiodegradation reactor (ILPBR) was used for degradation of pyridine in batch and continuous experiments following three protocols: photolysis alone (P), biodegradation alone (B), and intimately coupled photolysis and biodegradation (P&B) to investigate the regularity of pyridine degradation. The experimental results indicated that pyridine removal rate by P&B was fastest among three protocols in batch experiment, in which protocol B was faster than P. For initial pyridine concentration of 100 mg L(-1), the pyridine removal rates were respectively 4.95, 10.2 and 14.58 mg (L x h)(-1) corresponding to protocol P, B and P&B. Pyridine degradation kinetic equations were established based on Monod model, and the saturation constants decreased from 1920.4 mg x L(-1) for protocol B to 1094.1 mg x L(-1) for protocol P&B. Protocols P, B and P&B were also used for pyridine degradation in continuous flow and influent pyridine concentration increased from 50 to 300 mg x L(-1), and their average removal rates were respectively 15.8 mg (L x h)(-1) for protocol P, 23.1 mg x (L x h)(-1) for protocol B and 24.9 mg x (L x h)(-1) for protocol P&B, in which the removal rates were higher than that in batch. Experiments suggested that the inhibition of pyridine to biofilm could be relieved due to UV irradiation in process of intimately coupled UV photolysis and biodegradation, and biofilm had kept its bioactivity degrading pyridine and enhanced pyridine removal rates.

  9. The effects of biodegradation on biomarker maturity indicators in sequentially biodegraded oils from Liaohe Basin,China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    By aid of gas chromatogram/mass spectrometry(GC-MS) ,the distributions and the compositions of biomarkers in a set of sequentially biodegraded oils from Liaohe Basin,China,have been quantitatively analyzed,and it has been found that during the biodegradation process of crude oils,the molecular maturity parameters such as Ts/Tm,homohopane C31 22S/(22S+22R) and sterane C29 20S/(20S+20R) ratios will be affected to different extent. The results show that except homohopane C31 22S/(22S+22R) ratio,Ts/Tm ratio will decrease with increasing biodegradation,but for C29 20S/(20S+20R) ratio,it will almost remain constant in slightly and moderately biodegraded oils,and then will increase quickly in severely biodegraded oils. The main reason is that there are some differences in the ability of resistant biodegradation for different isomer of biomarkers with different stereo configuration,resulting in the fact that destroying rate by bacteria for those biomarkers with weak ability will be higher than those with strong ability in resistant biodegradation. For example,18α(H) -22,29,30-trisnorhopanes(Ts) will be destroyed more quickly than 17α(H) -22,29,30-trisnorshopanres(Tm) ,and 20R isomer is more quickly than 20S isomer for C29 sterane,resulting in the relative ratios changed with increasing biodegradation. Therefore,much more attention should be paid to the biodegradation extent of crude oils and the type of biomarker maturity indicators,when the distributions and the compositions of biomarkers in biodegraded oils are used to determine the maturity of biodegraded oils.

  10. SCREENING OF BACTERIAL PRODUCTS FOR THEIR CRUDE OIL BIODEGRADATION EFFECTIVENESS

    Science.gov (United States)

    Although petroleum hydrocarbons have been known to be biodegradable for decades (1-5), use of microbial cultures to enhance natural biodegradation (bioaugmentation) has met with limited success (6-10). Despite the paucity of controlled field studies demonstrating the effectivene...

  11. Methods for Evaluating the Biodegradability of Environmentally Degradable Polymers

    NARCIS (Netherlands)

    Zee, van der M.

    2014-01-01

    This chapter presents an overview of the current knowledge on experimental methods for monitoring the biodegradability of polymeric materials. The focus is, in particular, on the biodegradation of materials under environmental conditions. Examples of in vivo degradation of polymers used in biomedica

  12. Biodegradable hollow fibres for the controlled release of drugs

    NARCIS (Netherlands)

    Schakenraad, J.M.; Oosterbaan, J.A.; Nieuwenhuis, P.; Molenaar, I.; Olijslager, J.; Potman, W.; Eenink, M.J.D.; Feijen, J.

    1988-01-01

    Biodegradable hollow fibres of poly-l-lactic acid (PLLA) filled with a suspension of the contraceptive hormone levonorgestrel in castor oil were implanted subcutaneously in rats to study the rate of drug release, rate of biodegradation and tissue reaction caused by the implant. The in vivo drug rele

  13. Biodegradation of clofibric acid and identification of its metabolites

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, R. [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); ESTS-IPS, Escola Superior de Tecnologia de Setubal do Instituto Politecnico de Setubal, Rua Vale de Chaves, Campus do IPS, Estefanilha, 2910-761 Setubal (Portugal); Oehmen, A. [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Carvalho, G. [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Instituto de Biologia Experimental e Tecnologica (IBET), Av. da Republica (EAN), 2784-505 Oeiras (Portugal); Noronha, J.P. [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Reis, M.A.M., E-mail: amr@fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal)

    2012-11-30

    Graphical abstract: Metabolites produced during clofibric acid biodegradation. Highlights: Black-Right-Pointing-Pointer Clofibric acid is biodegradable. Black-Right-Pointing-Pointer Mainly heterotrophic bacteria degraded the clofibric acid. Black-Right-Pointing-Pointer Metabolites of clofibric acid biodegradation were identified. Black-Right-Pointing-Pointer The metabolic pathway of clofibric acid biodegradation is proposed. - Abstract: Clofibric acid (CLF) is the pharmaceutically active metabolite of lipid regulators clofibrate, etofibrate and etofyllinclofibrate, and it is considered both environmentally persistent and refractory. This work studied the biotransformation of CLF in aerobic sequencing batch reactors (SBRs) with mixed microbial cultures, monitoring the efficiency of biotransformation of CLF and the production of metabolites. The maximum removal achieved was 51% biodegradation (initial CLF concentration = 2 mg L{sup -1}), where adsorption and abiotic removal mechanisms were shown to be negligible, showing that CLF is indeed biodegradable. Tests showed that the observed CLF biodegradation was mainly carried out by heterotrophic bacteria. Three main metabolites were identified, including {alpha}-hydroxyisobutyric acid, lactic acid and 4-chlorophenol. The latter is known to exhibit higher toxicity than the parent compound, but it did not accumulate in the SBRs. {alpha}-Hydroxyisobutyric acid and lactic acid accumulated for a period, where nitrite accumulation may have been responsible for inhibiting their degradation. A metabolic pathway for the biodegradation of CLF is proposed in this study.

  14. Nanocomposites with biodegradable polymers synthesis properties and future perspectives

    CERN Document Server

    2011-01-01

    Polymers are used in practically every facet of daily life. Most polymers come from fossil fuels and are not biodegradable, causing long-term environmental hazards. Biodegradable polymers provide an alternative class of materials. Composites of such polymers have high potential within a wide spectrum of applications.

  15. A Sensitive and Biodegradable Pressure Sensor Array for Cardiovascular Monitoring.

    Science.gov (United States)

    Boutry, Clementine M; Nguyen, Amanda; Lawal, Qudus Omotayo; Chortos, Alex; Rondeau-Gagné, Simon; Bao, Zhenan

    2015-11-18

    An array of highly sensitive pressure sensors entirely made of biodegradable materials is presented, designed as a single-use flexible patch for application in cardiovascular monitoring. The high sensitivity in combination with fast response time is unprecedented when compared to recent reports on biodegradable pressure sensors (sensitivity three orders of magnitude higher), as illustrated by pulse wave velocity measurements, toward hypertension detection.

  16. Wet air oxidation induced enhanced biodegradability of distillery effluent.

    Science.gov (United States)

    Malik, S N; Saratchandra, T; Tembhekar, P D; Padoley, K V; Mudliar, S L; Mudliar, S N

    2014-04-01

    The present study reports the feasibility of Wet Air Oxidation (WAO) as a pretreatment option for enhanced biodegradation of complex distillery effluent. Initially, the distillery effluent was pretreated by WAO at different process conditions (pressure, temperature and time) to facilitate enhancement in the biodegradability index (BI = BOD5: COD ratio). The biodegradability of WAO pretreated effluent was evaluated by subjecting it to aerobic biodegradation and anaerobic followed by aerobic biodegradation. Aerobic biodegradation of pretreated effluent with enhanced biodegradability index (BI = 0.4-0.8) showed enhanced COD reduction of up to 67.7%, whereas the untreated effluent (BI = 0.17) indicated poor COD reduction of only 22.5%. Anaerobic followed by aerobic biodegradation of pretreated effluent has shown up to 87.9% COD reduction, while the untreated effluent has shown only 43.1% COD reduction. Bio-kinetic parameters also confirmed the increased rate of bio-oxidation at enhanced BIs. The results indicate that the WAO pretreatment facilitates enhanced bio-oxidation/bio-degradation of complex effluents like the distillery spent wash.

  17. Biodegradable elastomers for biomedical applications and regenerative medicine

    NARCIS (Netherlands)

    Bat, Erhan; Zhang, Zheng; Feijen, Jan; Grijpma, Dirk W.; Poot, Andre A.

    2014-01-01

    Synthetic biodegradable polymers are of great value for the preparation of implants that are required to reside only temporarily in the body. The use of biodegradable polymers obviates the need for a second surgery to remove the implant, which is the case when a nondegradable implant is used. After

  18. Compared in vivo toxicity in mice of lung delivered biodegradable and non-biodegradable nanoparticles.

    Science.gov (United States)

    Aragao-Santiago, Letícia; Hillaireau, Hervé; Grabowski, Nadège; Mura, Simona; Nascimento, Thais L; Dufort, Sandrine; Coll, Jean-Luc; Tsapis, Nicolas; Fattal, Elias

    2016-01-01

    To design nanoparticle (NP)-based drug delivery systems for pulmonary administration, biodegradable materials are considered safe, but their potential toxicity is poorly explored. We here explore the lung toxicity in mice of biodegradable nanoparticles (NPs) and compare it to the toxicity of non-biodegradable ones. NP formulations of poly(d,l-lactide-co-glycolide) (PLGA) coated with chitosan (CS), poloxamer 188 (PF68) or poly(vinyl alcohol) (PVA), which renders 200 nm NPs of positive, negative or neutral surface charge respectively, were analyzed for their biodistribution by in vivo fluorescence imaging and their inflammatory potential after single lung nebulization in mice. After exposure, analysis of bronchoalveolar lavage (BAL) cell population, protein secretion and cytokine release as well as lung histology were carried out. The inflammatory response was compared to the one induced by non-biodegradable counterparts, namely, TiO2 of rutile and anatase crystal form and polystyrene (PS). PLGA NPs were mostly present in mice lungs, with little passage to other organs. An increase in neutrophil recruitment was observed in mice exposed to PS NPs 24 h after nebulization, which declined at 48 h. This result was supported by an increase in interleukin (IL)-6 and tumor necrosis factor α (TNFα) in BAL supernatant at 24 h. TiO2 anatase NPs were still present in lung cells 48 h after nebulization and induced the expression of pro-inflammatory cytokines and the recruitment of polymorphonuclear cells to BAL. In contrast, regardless of their surface charge, PLGA NPs did not induce significant changes in the inflammation markers analyzed. In conclusion, these results point out to a safe use of PLGA NPs regardless of their surface coating compared to non-biodegradable ones.

  19. Hydrocarbons biodegradation in unsaturated porous medium; Biodegradation des hydrocarbures en milieu poreux insature

    Energy Technology Data Exchange (ETDEWEB)

    Gautier, C

    2007-12-15

    Biological processes are expected to play an important role in the degradation of petroleum hydrocarbons in contaminated soils. However, factors influencing the kinetics of biodegradation are still not well known, especially in the unsaturated zone. To address these biodegradation questions in the unsaturated zone an innovative experimental set up based on a physical column model was developed. This experimental set up appeared to be an excellent tool for elaboration of a structured porous medium, with well defined porous network and adjusted water/oil saturations. Homogeneous repartition of both liquid phases (i.e., aqueous and non aqueous) in the soil pores, which also contain air, was achieved using ceramic membranes placed at the bottom of the soil column. Reproducible interfaces (and connectivity) are developed between gas, and both non mobile water and NAPL phases, depending on the above-defined characteristics of the porous media and on the partial saturations of these three phases (NAPL, water and gas). A respirometric apparatus was coupled to the column. Such experimental set up have been validated with hexadecane in dilution in an HMN phase. This approach allowed detailed information concerning n-hexadecane biodegradation, in aerobic condition, through the profile of the oxygen consumption rate. We have taken benefit of this technique, varying experimental conditions, to determine the main parameters influencing the biodegradation kinetics and compositional evolution of hydrocarbons, under steady state unsaturated conditions and with respect to aerobic metabolism. Impacts of the nitrogen quantity and of three different grain sizes have been examined. Biodegradation of petroleum cut, as diesel cut and middle distillate without aromatic fraction, were, also studied. (author)

  20. Biodegradation of petroleum hydrocarbons in hypersaline environments

    Directory of Open Access Journals (Sweden)

    Luiz Fernando Martins

    2012-09-01

    Full Text Available Literature on hydrocarbon degradation in extreme hypersaline media presents studies that point to a negative effect of salinity increase on hydrocarbonoclastic activity, while several others report an opposite tendency. Based on information available in the literature, we present a discussion on the reasons that justify these contrary results. Despite the fact that microbial ability to metabolize hydrocarbons is found in extreme hypersaline media, indeed some factors are critical for the occurrence of hydrocarbon degradation in such environments. How these factors affect hydrocarbon degradation and their implications for the assessment of hydrocarbon biodegradation in hypersaline environments are presented in this review.

  1. Development of biodegradable fungicide by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youngkeun; Kim, Dongsub

    2012-03-15

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified. Microbial pesticide were manufactured in combination of various additives. Antiphytopathogenic effects were proven by field test and it was promising to prevent Chinese cabbage and radish from phytophthora and root rot.

  2. Development of biodegradable fungicide by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Keun; Kim, Dong Sub [KAERI, Daejeon (Korea, Republic of)

    2011-01-15

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified. Microbial pesticide were manufactured in combination of various additives. Antiphytopathogenic effects were proven by pot experiment and It was promising to prevent pepper, Chinese cabbage and radish from anthrax, phytophthora and root rot

  3. Injectable, Biodegradable Hydrogels for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Huaping Tan

    2010-03-01

    Full Text Available Hydrogels have many different applications in the field of regenerative medicine. Biodegradable, injectable hydrogels could be utilized as delivery systems, cell carriers, and scaffolds for tissue engineering. Injectable hydrogels are an appealing scaffold because they are structurally similar to the extracellular matrix of many tissues, can often be processed under relatively mild conditions, and may be delivered in a minimally invasive manner. This review will discuss recent advances in the field of injectable hydrogels, including both synthetic and native polymeric materials, which can be potentially used in cartilage and soft tissue engineering applications.

  4. Lipase biocatalysis for useful biodegradable products

    Energy Technology Data Exchange (ETDEWEB)

    Linko, Y.Y.; Wang, Zhuo Lin; Uosukainen, E.; Seppaelae, J. [Helsinki Univ. of Technology, Espoo (Finland); Laemsae, M. [Raisio Group Oil Milling Industry, Raisio (Finland)

    1996-12-31

    It was shown that lipases can be used as biocatalysts in the production of useful biodegradable compounds such as 1-butyl oleate by direct esterification of butanol and oleic acid to decrease viscosity of biodiesel in winter use. By enzymic transesterification, a mixture of 2-ethyl-1-hexyl esters from rapeseed oil fatty acids can be obtained in good yields for use as a solvent, and of trimethylolpropane esters for use as a lubricant. Finally, it was demonstrated that polyesters with a mass average molar mass in excess of 75,000 g mol{sup -}1 can be obtained by esterification or transesterification by using lipase as biocatalyst. (author) (3 refs.)

  5. Biosynthesis and biodegradation of wood components

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, T. (ed.)

    1985-01-01

    A textbook containing 22 chapters by various authors covers the structure of wood, the localization of polysaccharides and lignins in wood cell walls, metabolism and synthetic function of cambial tissue, cell organelles and their function in the biosynthesis of cell wall components, biosynthesis of plant cell wall polysaccharides, lignin, cutin, suberin and associated waxes, phenolic acids and monolignols, quinones, flavonoids, tannins, stilbenes and terpenoid wood extractives, the occurrence of extractives, the metabolism of phenolic acids, wood degradation by micro-organisms and fungi, and biodegradation of cellulose, hemicelluloses, lignin, and aromatic extractives of wood. An index is included.

  6. Biodegradation of petroleum hydrocarbons in hypersaline environments

    Science.gov (United States)

    Martins, Luiz Fernando; Peixoto, Raquel Silva

    2012-01-01

    Literature on hydrocarbon degradation in extreme hypersaline media presents studies that point to a negative effect of salinity increase on hydrocarbonoclastic activity, while several others report an opposite tendency. Based on information available in the literature, we present a discussion on the reasons that justify these contrary results. Despite the fact that microbial ability to metabolize hydrocarbons is found in extreme hypersaline media, indeed some factors are critical for the occurrence of hydrocarbon degradation in such environments. How these factors affect hydrocarbon degradation and their implications for the assessment of hydrocarbon biodegradation in hypersaline environments are presented in this review. PMID:24031900

  7. Biodegradable long-circulating polymeric nanospheres.

    Science.gov (United States)

    Gref, R; Minamitake, Y; Peracchia, M T; Trubetskoy, V; Torchilin, V; Langer, R

    1994-03-18

    Injectable nanoparticulate carriers have important potential applications such as site-specific drug delivery or medical imaging. Conventional carriers, however, cannot generally be used because they are eliminated by the reticulo-endothelial system within seconds or minutes after intravenous injection. To address these limitations, monodisperse biodegradable nanospheres were developed from amphiphilic copolymers composed of two biocompatible blocks. The nanospheres exhibited dramatically increased blood circulation times and reduced liver accumulation in mice. Furthermore, they entrapped up to 45 percent by weight of the drug in the dense core in a one-step procedure and could be freeze-dried and easily redispersed without additives in aqueous solutions.

  8. Enhanced biodegradation of hydrocarbons in soil by microbial biosurfactant, sophorolipid.

    Science.gov (United States)

    Kang, Seok-Whan; Kim, Young-Bum; Shin, Jae-Dong; Kim, Eun-Ki

    2010-03-01

    Effectiveness of a microbial biosurfactant, sophorolipid, was evaluated in washing and biodegradation of model hydrocarbons and crude oil in soil. Thirty percent of 2-methylnaphthalene was effectively washed and solubilized with 10 g/L of sophorolipid with similar or higher efficiency than that of commercial surfactants. Addition of sophorolipid in soil increased biodegradation of model compounds: 2-methylnaphthalene (95% degradation in 2 days), hexadecane (97%, 6 days), and pristane (85%, 6 days). Also, effective biodegradation method of crude oil in soil was observed by the addition of sophorolipid, resulting in 80% biodegradation of saturates and 72% aromatics in 8 weeks. These results showed the potentials of the microbial biosurfactant, sophorolipid, as an effective surfactant for soil washing and as an in situ biodegradation enhancer.

  9. Biodegradation of acetanilide herbicides acetochlor and butachlor in soil

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The biodegradation of two acetanilide herbicides,acetochlor and butachlor in soil after other environmental organicmatters addition were measured during 35 days laboratoryincubations. The herbicides were applied to soil alone, soil-SDBS(sodium dodecylbenzene sulfonate) mixtures and soil-HA (humic acid)mixtures. Herbicide biodegradation kinetics were compared in thedifferent treatment. Biodegradation products of herbicides in soilalone samples were identified by GC/MS at the end of incubation.Addition of SDBS and HA to soil decreased acetochlorbiodegradation, but increased butachlor biodegradation. Thebiodegradation half-life of acetochlor and butachlor in soil alone,soil-SDBS mixtures and soil-HA mixtures were 4.6d, 6.1d, 5.4d, and5.3d, 4.9d, and 5.3d respectively. The biodegradation products werehydroxyacetochlor and 2-methyl-6-ethylaniline for acetochlor, andhydroxybutachlor and 2,6-diethylaniline for butachlor.

  10. Biodegradable plastic agricultural mulches and key features of microbial degradation.

    Science.gov (United States)

    Brodhagen, Marion; Peyron, Mark; Miles, Carol; Inglis, Debra Ann

    2015-02-01

    The development of biodegradable plastic mulch films for use in agriculture has been ongoing for decades. These films consist of mixtures of polymers with various additives. As a result, their physical and chemical properties differ from those of the pure polymers often used for in vitro enzymatic and microbial degradation studies, raising questions about the biodegradation capability of mulch films. Currently, standards exist for the biodegradation of plastics in composting conditions but not in soil. Biodegradation in soil or compost depends on a complex synergy of biological and abiotic degradative processes. This review discusses the physicochemical and structural properties of biodegradable plastic mulches, examines their potential for on-site decomposition in light of site-to-site variance due to environmental and biological conditions, and considers the potential for long-term effects on agroecosystem sustainability and functionality.

  11. Evaluation of Artificial Intelligence Based Models for Chemical Biodegradability Prediction

    Directory of Open Access Journals (Sweden)

    Aleksandar Sabljic

    2004-12-01

    Full Text Available This study presents a review of biodegradability modeling efforts including a detailed assessment of two models developed using an artificial intelligence based methodology. Validation results for these models using an independent, quality reviewed database, demonstrate that the models perform well when compared to another commonly used biodegradability model, against the same data. The ability of models induced by an artificial intelligence methodology to accommodate complex interactions in detailed systems, and the demonstrated reliability of the approach evaluated by this study, indicate that the methodology may have application in broadening the scope of biodegradability models. Given adequate data for biodegradability of chemicals under environmental conditions, this may allow for the development of future models that include such things as surface interface impacts on biodegradability for example.

  12. Critical evaluation of biodegradable polymers used in nanodrugs

    Directory of Open Access Journals (Sweden)

    Marin E

    2013-08-01

    Full Text Available Edgar Marin,1–3 Maria Isabel Briceño,2 Catherina Caballero-George11Unit of Pharmacology, Center of Biodiversity and Drug Discovery, Institute of Scientific Research and High Technology Services, 2Nano Dispersions Technology, Panama, Republic of Panama; 3Department of Biotechnology, Archaria Nagarjuna University, Guntur, IndiaAbstract: Use of biodegradable polymers for biomedical applications has increased in recent decades due to their biocompatibility, biodegradability, flexibility, and minimal side effects. Applications of these materials include creation of skin, blood vessels, cartilage scaffolds, and nanosystems for drug delivery. These biodegradable polymeric nanoparticles enhance properties such as bioavailability and stability, and provide controlled release of bioactive compounds. This review evaluates the classification, synthesis, degradation mechanisms, and biological applications of the biodegradable polymers currently being studied as drug delivery carriers. In addition, the use of nanosystems to solve current drug delivery problems are reviewed.Keywords: biodegradable polymers, nanoparticles, drug delivery, cellular uptake, biomedical applications

  13. Porous Biodegradable Metals for Hard Tissue Scaffolds: A Review

    Directory of Open Access Journals (Sweden)

    A. H. Yusop

    2012-01-01

    Full Text Available Scaffolds have been utilized in tissue regeneration to facilitate the formation and maturation of new tissues or organs where a balance between temporary mechanical support and mass transport (degradation and cell growth is ideally achieved. Polymers have been widely chosen as tissue scaffolding material having a good combination of biodegradability, biocompatibility, and porous structure. Metals that can degrade in physiological environment, namely, biodegradable metals, are proposed as potential materials for hard tissue scaffolding where biodegradable polymers are often considered as having poor mechanical properties. Biodegradable metal scaffolds have showed interesting mechanical property that was close to that of human bone with tailored degradation behaviour. The current promising fabrication technique for making scaffolds, such as computation-aided solid free-form method, can be easily applied to metals. With further optimization in topologically ordered porosity design exploiting material property and fabrication technique, porous biodegradable metals could be the potential materials for making hard tissue scaffolds.

  14. Characterization and aerobic biodegradation of selected monoterpenes

    Energy Technology Data Exchange (ETDEWEB)

    Misra, G.; Pavlostathis, S.G.; Li, J.; Purdue, E.M. [Georgia Institute of Technology, Atlanta, GA (United States)

    1996-12-31

    Monoterpenes are biogenic chemicals and occur in abundance in nature. Large-scale industrial use of these chemicals has recently been initiated in an attempt to replace halogenated solvents and chlorofluorocarbons which have been implicated in the stratospheric depletion of ozone. This study examined four hydrocarbon monoterpenes (d-limonene, {alpha}-pinene, {gamma}-terpinene, and terpinolene) and four alcohols (arbanol, linalool, plinol, and {alpha}-terpineol). Water solubility, vapor pressure, and octanol/water partition coefficients were estimated. Aerobic biodegradability tests were conducted in batch reactors by utilizing forest soil extract and enriched cultures as inoculum. The hydrophobic nature and high volatility of the hydrocarbons restricted the investigation to relatively low aqueous concentrations. Each monoterpene was analyzed with a gas chromatograph equipped with a flame ionization detector after extraction from the aqueous phase with isooctane. Terpene mineralization was tested by monitoring liquid-phase carbon, CO{sub 2} production and biomass growth. All four hydrocarbons and two alcohols readily degraded under aerobic conditions. Plinol resisted degradation in assays using inocula from diverse sources, while arbanol degraded very slowly. The intrinsic biokinetics coefficients for the degradation of d-limonene and {alpha}-terpineol were estimated by using cultures enriched with the respective monoterpenes. Monoterpene biodegradation followed Monod kinetics.

  15. Optimization of low ring polycylic aromatic biodegradation

    Science.gov (United States)

    Othman, N.; Abdul-Talib, S.; Tay, C. C.

    2016-07-01

    Polycyclic aromatic hydrocarbons (PAHs) are recalcitrance and persistence that finally turn into problematic environmental contaminants. Microbial degradation is considered to be the primary mechanism of PAHs removal from the environment due to its organic criteria. This study is carried out to optimize degradation process of low ring PAHs. Bacteria used in this study was isolated from sludge collected from Kolej Mawar, Universiti Teknologi MARA, Shah Alam, Selangor. Working condition namely, substrate concentration, bacteria concentration, pH and temperature were optimized. PAHs in the liquid sample was extracted by using solid phase microextractio equipped with a 7 µm polydimethylsiloxane (PDMS) SPME fibr. Removal of PAHs were assessed by measuring PAHs concentration using GC-FID. Results from the optimization study of biodegradation indicated that maximum rate of PAHs removal occurred at 100 mgL-1 of PAHs, 10% bacteria concentration, pH 7.0 and 30°C. These working condition had proved the effectiveness of using bacteria in biodegradation process of PAHs.

  16. A REVIEW ON BIODEGRADABLE STARCH BASED FILM

    Directory of Open Access Journals (Sweden)

    Hooman Molavi

    2015-04-01

    Full Text Available In recent years, biodegradable edible films have become very important in research related to food, due to their compatibility with the environment and their use in the food packaging industry. Various sources can be used in the production of biopolymers as biodegradable films that include polysaccharides, proteins and lipids. Among the various polysaccharides, starch due to its low price and its abundance in nature is of significant importance. Several factors affect the properties of starch films; such as the source which starch is obtained from, as well as the ratio of constituents of the starch. Starch films have advantages such as low thickness, flexibility and transparency though; there are some downsides to mention, such as the poor mechanical properties and water vapor permeability. Thus, using starch alone to produce the film will led to restrictions on its use. To improve the mechanical properties of starch films and also increases resistance against humidity, several methods can be used; including the starch modifying techniques such as cross linking of starch and combining starch with other natural polymers. Other methods such as the use of lipid in formulations of films to increase the resistance to moisture are possible, but lipids are susceptible to oxidation. Therefore, new approaches are based on the integration of different biopolymers in food packaging.

  17. Endothelial Cellular Responses to Biodegradable Metal Zinc.

    Science.gov (United States)

    Ma, Jun; Zhao, Nan; Zhu, Donghui

    Biodegradable zinc (Zn) metals, a new generation of biomaterials, have attracted much attention due to their excellent biodegradability, bioabsorbability, and adaptability to tissue regeneration. Compared with magnesium (Mg) and iron (Fe), Zn exhibits better corrosion and mechanical behaviors in orthopedic and stent applications. After implantation, Zn containing material will slowly degrade, and Zn ions (Zn(2+)) will be released to the surrounding tissue. For stent applications, the local Zn(2+)concentration near endothelial tissue/cells could be high. However, it is unclear how endothelia will respond to such high concentrations of Zn(2+), which is pivotal to vascular remodeling and regeneration. Here, we evaluated the short-term cellular behaviors of primary human coronary artery endothelial cells (HCECs) exposed to a concentration gradient (0-140 μM) of extracellular Zn(2+). Zn(2+) had an interesting biphasic effect on cell viability, proliferation, spreading, and migration. Generally, low concentrations of Zn(2+) promoted viability, proliferation, adhesion, and migration, while high concentrations of Zn(2+) had opposite effects. For gene expression profiles, the most affected functional genes were related to cell adhesion, cell injury, cell growth, angiogenesis, inflammation, vessel tone, and coagulation. These results provide helpful information and guidance for Zn-based alloy design as well as the controlled release of Zn(2+)in stent and other related medical applications.

  18. Immunological Response to Biodegradable Magnesium Implants

    Science.gov (United States)

    Pichler, Karin; Fischerauer, Stefan; Ferlic, Peter; Martinelli, Elisabeth; Brezinsek, Hans-Peter; Uggowitzer, Peter J.; Löffler, Jörg F.; Weinberg, Annelie-Martina

    2014-04-01

    The use of biodegradable magnesium implants in pediatric trauma surgery would render surgical interventions for implant removal after tissue healing unnecessary, thereby preventing stress to the children and reducing therapy costs. In this study, we report on the immunological response to biodegradable magnesium implants—as an important aspect in evaluating biocompatibility—tested in a growing rat model. The focus of this study was to investigate the response of the innate immune system to either fast or slow degrading magnesium pins, which were implanted into the femoral bones of 5-week-old rats. The main alloying element of the fast-degrading alloy (ZX50) was Zn, while it was Y in the slow-degrading implant (WZ21). Our results demonstrate that degrading magnesium implants beneficially influence the immune system, especially in the first postoperative weeks but also during tissue healing and early bone remodeling. However, rodents with WZ21 pins showed a slightly decreased phagocytic ability during bone remodeling when the degradation rate reached its maximum. This may be due to the high release rate of the rare earth-element yttrium, which is potentially toxic. From our results we conclude that magnesium implants have a beneficial effect on the innate immune system but that there are some concerns regarding the use of yttrium-alloyed magnesium implants, especially in pediatric patients.

  19. Tailoring the biodegradability of porous silicon nanoparticles.

    Science.gov (United States)

    Hon, Nick K; Shaposhnik, Zory; Diebold, Eric D; Tamanoi, Fuyuhiko; Jalali, Bahram

    2012-12-01

    Porous silicon nanoparticles (PSiNPs) are attractive carriers for targeted drug delivery in nanomedicine. For in vivo applications, the biodegradation property of PSiNPs provides a pathway for their safe clearance from the body. Particles sizes of 80-120 nm are of particular interest as they are important for cellular applications, such as drug delivery for cancer therapy, because these nanoparticles can take advantage of the enhanced permeability and retention effect to deliver drug preferentially to tumors with leaky vasculature, yet large enough to avoid renal clearance. However, the biodegradability rate of such particles is often too fast, which limits particle half-life and potentially reduces their in vivo delivery efficiency. In this work, we focus on the degradation of nanoscale particles and study the effect of both thermal oxidation and silica coating on the stability of PSiNPs in phosphate buffered saline solution (a close mimic of a basic biological fluid). Using thermal oxidation, the half-life of PSiNPs can be varied from 10 min up to 3 h. Using silica coating, the half-life can be extended further to 8 h. The particles produced using both these techniques can be functionalized using standard silica surface chemistries developed for applications in drug delivery.

  20. Polymeric Biodegradable Stent Insertion in the Esophagus

    Directory of Open Access Journals (Sweden)

    Kai Yang

    2016-04-01

    Full Text Available Esophageal stent insertion has been used as a well-accepted and effective alternative to manage and improve the quality of life for patients diagnosed with esophageal diseases and disorders. Current stents are either permanent or temporary and are fabricated from either metal or plastic. The partially covered self-expanding metal stent (SEMS has a firm anchoring effect and prevent stent migration, however, the hyperplastic tissue reaction cause stent restenosis and make it difficult to remove. A fully covered SEMS and self-expanding plastic stent (SEPS reduced reactive hyperplasia but has a high migration rate. The main advantage that polymeric biodegradable stents (BDSs have over metal or plastic stents is that removal is not require and reduce the need for repeated stent insertion. But the slightly lower radial force of BDS may be its main shortcoming and a post-implant problem. Thus, strengthening support of BDS is a content of the research in the future. BDSs are often temporarily effective in esophageal stricture to relieve dysphagia. In the future, it can be expect that biodegradable drug-eluting stents (DES will be available to treat benign esophageal stricture, perforations or leaks with additional use as palliative modalities for treating malignant esophageal stricture, as the bridge to surgery or to maintain luminal patency during neoadjuvant chemoradiation.

  1. Modification of Biodegradable Polyesters Using Electron Beam

    Directory of Open Access Journals (Sweden)

    M. Suhartini

    2013-12-01

    Full Text Available Poly(4-Hydroxybutirat P4HB, Poly(butylene succinate-co-adipate PBSA and Poly(-caprolactone PCL were electron beam (EB-irradiated. Poly(4-Hydroxybutirat was irradiated without any polyfunctional monomers (PFM. While PBSA and PCL were irradiated in the presence of polyfunctional monomers such as Trimethallyl isocyanurate (TMAIC, Polyethyleneglycol dimethacrylate (2G, 4G, Trimethylolpropane trimethacrylate (TMPT and Tetramethylolmethane tetraacrylate (A-TMMT at ambient temperature. Aim of the study is to improve the properties of biodegradable polyester. It was pointed out that crosslinking yield of P4HB (6.39% gel was formed at dose of 90 kGy irradiated in vacuum conditions. Radiation degradation promoted, when P4HB was irradiated in air. The optimum crosslinking yield of PCL and PBSA respectively, were formed in the presence of 1% TMAIC at dose of 50 kGy. The biodegradability of the crosslinked PBSA evaluated by soil burial test is slightly retarded by increasing crosslinking yields.

  2. Biodegradable polymer optical fiber (Conference Presentation)

    Science.gov (United States)

    Zhang, Chenji; Kalaba, Surge; Shan, Dingying; Xu, Kaitian; Yang, Jian; Liu, Zhiwen

    2016-10-01

    Biocompatible and even biodegradable polymers have unique advantages in various biomedical applications. Recent years, photonic devices fabricated using biocompatible polymers have been widely studied. In this work, we manufactured an optical fiber using biodegradable polymer POC and POMC. This step index optical fiber is flexible and easy to handle. Light was coupled into this polymer fiber by directly using objective. The fiber has a good light guiding property and an approximate loss of 2db/cm. Due to the two layer structure, our fiber is able to support applications inside biological tissue. Apart from remarkable optical performance, our fiber was also found capable of performing imaging. By measuring the impulse response of this multimode polymer fiber and using the linear inversion algorithm, concept proving experiments were completed. Images input into our fiber were able to be retrieved from the intensity distribution of the light at the output end. Experiment result proves the capability of our optical fiber to be used as a fiber endoscopy no needs to remove.

  3. Degradation of oxo-biodegradable plastic by Pleurotus ostreatus.

    Science.gov (United States)

    da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Nunes, Mateus Dias; da Silva, Marliane de Cássia Soares; Kasuya, Maria Catarina Megumi

    2013-01-01

    Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV) or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D2W) plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate.

  4. Degradation of oxo-biodegradable plastic by Pleurotus ostreatus.

    Directory of Open Access Journals (Sweden)

    José Maria Rodrigues da Luz

    Full Text Available Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D2W plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate.

  5. Biodegradability of fluorinated fire-fighting foams in water.

    Science.gov (United States)

    Bourgeois, A; Bergendahl, J; Rangwala, A

    2015-07-01

    Fluorinated fire-fighting foams may be released into the environment during fire-fighting activities, raising concerns due to the potential environmental and health impacts for some fluorinated organics. The current study investigated (1) the biodegradability of three fluorinated fire-fighting foams, and (2) the applicability of current standard measures used to assess biodegradability of fluorinated fire-fighting foams. The biodegradability of three fluorinated fire-fighting foams was evaluated using a 28-day dissolved organic carbon (DOC) Die-Away Test. It was found that all three materials, diluted in water, achieved 77-96% biodegradability, meeting the criteria for "ready biodegradability". Defluorination of the fluorinated organics in the foam during biodegradation was measured using ion chromatography. It was found that the fluorine liberated was 1-2 orders of magnitude less than the estimated initial amount, indicating incomplete degradation of fluorinated organics, and incomplete CF bond breakage. Published biodegradability data may utilize biochemical oxygen demand (BOD), chemical oxygen demand (COD), and total organic carbon (TOC) metrics to quantify organics. COD and TOC of four fluorinated compounds were measured and compared to the calculated carbon content or theoretical oxygen demand. It was found that the standard dichromate-based COD test did not provide an accurate measure of fluorinated organic content. Thus published biodegradability data using COD for fluorinated organics quantification must be critically evaluated for validity. The TOC measurements correlated to an average of 91% of carbon content for the four fluorinated test substances, and TOC is recommended for use as an analytical parameter in fluorinated organics biodegradability tests.

  6. Fully biodegradable coronary stents : progress to date.

    Science.gov (United States)

    Ramcharitar, Steve; Serruys, Patrick W

    2008-01-01

    The limitations of currently available metallic drug-eluting stents have renewed interest in biodegradable stents (BDS). Apart from removing the (offending) foreign material that may potentiate a thrombotic event, BDS have the advantage of avoiding 'full metal jackets,' and thus can preclude subsequent coronary surgery. In addition, they do not interfere with the diagnostic evaluation of non-invasive imaging such as cardiac magnetic resonance and CT. There are now several BDS in development or in clinical trials that incorporate a variety of biodegradable polymer technologies. Two broad categories of materials are generally used: those made from organic biopolymers and those made from corrodible metals. However, to date, none of the materials/stents tested have been able to establish a perfect balance between biocompatibility, the kinetics of degradation needed to maintain mechanical strength to limit recoil, and inflammation. However, studies, such as the ABSORB trial with the everolimus eluting poly-L-lactide stent, which demonstrated comparable restenotic rates with bare metallic stents and a low incidence of major adverse cardiac events (MACE) at 12 months of 3.3%, with only one patient having a non-Q-wave myocardial infarction and no target lesion revascularization, suggest that there has been significant progress with respect to the earlier prototypes. The acute recoil observed could potentially be addressed with the polytyrosine REVA stent currently being evaluated in the RESORB trial, which incorporates a novel locking mechanism within its design. Alternative BDS designs include the combination of an antiproliferative drug with endothelial progenitor cell capturing antibodies to facilitate epithelialization and/or dual eluting having, in addition to the antiproliferative drug, polymeric salicyclic acid to limit inflammation. Compared with biodegradable polymers, there are fewer metals used in the manufacture of BDS. The only metal BDS in trials is the

  7. Biofilm formation and partial biodegradation of polystyrene by the actinomycete Rhodococcus ruber: biodegradation of polystyrene.

    Science.gov (United States)

    Mor, Roi; Sivan, Alex

    2008-11-01

    Polystyrene, which is one of the most utilized thermoplastics, is highly durable and is considered to be non-biodegradable. Hence, polystyrene waste accumulates in the environment posing an increasing ecological threat. In a previous study we have isolated a biofilm-producing strain (C208) of the actinomycete Rhodococcus ruber that degraded polyethylene films. Formation of biofilm, by C208, improved the biodegradation of polyethylene. Consequently, the present study aimed at monitoring the kinetics of biofilm formation by C208 on polystyrene, determining the physiological activity of the biofilm and analyzing its capacity to degrade polystyrene. Quantification of the biofilm biomass was performed using a modified crystal violet (CV) staining or by monitoring the protein content in the biofilm. When cultured on polystyrene flakes, most of the bacterial cells adhered to the polystyrene surface within few hours, forming a biofilm. The growth of the on polystyrene showed a pattern similar to that of a planktonic culture. Furthermore, the respiration rate, of the biofilm, exhibited a pattern similar to that of the biofilm growth. In contrast, the respiration activity of the planktonic population showed a constant decline with time. Addition of mineral oil (0.005% w/v), but not non-ionic surfactants, increased the biofilm biomass. Extended incubation of the biofilm for up to 8 weeks resulted in a small reduction in the polystyrene weight (0.8% of gravimetric weight loss). This study demonstrates the high affinity of C208 to polystyrene which lead to biofilm formation and, presumably, induced partial biodegradation.

  8. Biodegradable and biocompatible polymers for tissue engineering application: a review.

    Science.gov (United States)

    Asghari, Fatemeh; Samiei, Mohammad; Adibkia, Khosro; Akbarzadeh, Abolfazl; Davaran, Soodabeh

    2017-03-01

    Since so many years ago, tissue damages that are caused owing to various reasons attract scientists' attention to find a practical way to treat. In this regard, many studies were conducted. Nano scientists also suggested some ways and the newest one is called tissue engineering. They use biodegradable polymers in order to replace damaged structures in tissues to make it practical. Biodegradable polymers are dominant scaffolding materials in tissue engineering field. In this review, we explained about biodegradable polymers and their application as scaffolds.

  9. Partial Discharge Degradation of Several Biodegradable Polymers

    Science.gov (United States)

    Fuse, Norikazu; Fujita, Shinjiro; Hirai, Naoshi; Tanaka, Toshikatsu; Kozako, Masahiro; Kohtoh, Masanori; Okabe, Shigemitsu; Ohki, Yoshimichi

    Partial discharge (PD) resistance was examined by applying a constant voltage for four kinds of biodegradable polymers, i.e. poly-L-lactic acid (PLLA), polyethylene terephthalate succinate (PETS), poly ε-caprolactone butylene succinate (PCL-BS), and polybutylene succinate (PBS), and the results were compared with those of low density polyethylene (LDPE) and crosslinked low density polyethylene (XLPE). The PD resistance is determined by the erosion depth and the surface roughness caused by PDs, and is ranked as LDPE ≅ XLPE > PLLA ≅ PETS > PBS > PCL-BS. This means that the sample with a lower permittivity has better PD resistance. Furthermore, observations of the sample surface by a polarization microscope and a laser confocal one reveal that crystalline regions with spherulites are more resistant to PDs than amorphous regions. Therefore, good PD resistance can be achieved by the sample with a high crystallinity and a low permittivity.

  10. Biodegradation of Petroleum Hydrocarbons in Soil

    Directory of Open Access Journals (Sweden)

    MR Mehrasbi

    2003-09-01

    Full Text Available Biodegradation of petroleum hydrocarbons (20 g/kg dw soil was investigated in 3 media, differing in the kind of petroleum fractions. In the laboratory experiments, during 5 months, the activities of petroleum hydrocarbon-degrading microorganisms and dehydrogenase activity of soil was determined. Gas chromatographic analysis showed the biological decontaminations for gas oil, kerosene and synthetic mixture (gas oil, kerosene and furnace oil are 60 %, 36 % and 55 %, respectively. Dehydrogenase activity which was assessed by TTC technique, correlated significantly positive with the numbers of microorganisms. The Spearman rank correlation coefficients(r in contaminated soils with gas oil, kerosene and synthetic mixture were 0.79, 0.80 and 0.69, respectively.

  11. Biodegradable polymeric fiber structures in tissue engineering.

    Science.gov (United States)

    Tuzlakoglu, Kadriye; Reis, Rui L

    2009-03-01

    Tissue engineering offers a promising new approach to create biological alternatives to repair or restore function of damaged or diseased tissues. To obtain three-dimensional tissue constructs, stem or progenitor cells must be combined with a highly porous three-dimensional scaffold, but many of the structures purposed for tissue engineering cannot meet all the criteria required by an adequate scaffold because of lack of mechanical strength and interconnectivity, as well as poor surface characteristics. Fiber-based structures represent a wide range of morphological and geometric possibilities that can be tailored for each specific tissue-engineering application. The present article overviews the research data on tissue-engineering therapies based on the use of biodegradable fiber architectures as a scaffold.

  12. Biodegradation of lignin by Agaricus Bisporus

    Energy Technology Data Exchange (ETDEWEB)

    Vane, C.H.; Abbott, G.D.; Head, I.M. [Univ. of Newcastle upon Tyne (United Kingdom)

    1996-12-31

    The lignolytic activity of Agaricus bisporus will be addressed in this paper. Sound and fungally degraded lignins were characterized by Pyrolysis-Gas Chromatography-Mass Spectrometry (Py-GC-MS), Fourier Transform Infrared Spectroscopy (FnR) and elemental analysis. Fungally degraded lignins displayed increased wt%N, wt%H and wt%O content and decreased wt%C content The FTIR spectrum of decayed lignin showed an increase in the relative intensity of absorption bands assigned to carbonyl and carboxyl functional groups located on the aliphatic side chain and a decrease in absorption bands assigned to aromatic skeletal vibration modes. Semiquantitative Py-GC-MS revealed an 82% decrease in lignin derived pyrolysis products upon biodegradation. No significant increase in pyrolysis products with an oxygenated aliphatic side chain were detected in the fungally degraded lignin however shortening of the aliphatic side chain via cleavage at the {alpha}, {beta} and {gamma} positions was observed.

  13. Aerobic biodegradation of precoagulated cheese whey wastewater.

    Science.gov (United States)

    Rivas, Javier; Prazeres, Ana R; Carvalho, Fatima

    2011-03-23

    Prior to the application of an aerobic biological process, cheese whey wastewater has been pretreated by means of a precipitation stage by adding either NaOH or CaOH2. Both precipitating agents reduce roughly 50% of the raw wastewater chemical oxygen demand (COD). The sludge generated in the prestage shows acceptable settling properties, although solids from the CaOH2-treated effluent are better separated from the liquid bulk than those formed in NaOH-processed wastewater. In both situations, the presedimentation stage renders a supernatant more prone to biodegradation than the untreated effluent. The previous statement is corroborated by the determination of some biological kinetic parameters. Under the operating conditions used in this work, sludge generation after the biological process is reduced to a minimum. The sludge generated shows good settling properties, especially for those experiments in which CaOH2 has previously been added.

  14. Biodegradation of Crystal Violet by Agrobacterium radiobacter

    Institute of Scientific and Technical Information of China (English)

    G.K.Parshetti; S.G.Parshetti; A.A.Telke; D.C.Kalyani; R.A.Doong; S.P.Govindwar

    2011-01-01

    Agrobacterium radiobacter MTCC 8161 completely decolorized the Crystal Violet with 8 hr (10 mg/L) at static anoxic conditions.The decreased decolorization capability by A.radiobacter was observed,when the Crystal Violet concentration was increased from 10 to 100 mg/L.Semi-synthetic medium containing 1% yeast extract and 0.1% NH4Cl has shown 100% decolorization of Crystal Violet within 5 hr.A complete degradation of Crystal Violet by A.radiobacter was observed up to 7 cycles of repeated addition (10 mg/L).When the effect of increasing inoculum concentration on decolorization of Crystal Violet (100 rag/L) was studied,maximum decolorization was observed with 15% inoculum concentration.A significant increase in the activities of laccase (184%) and aminopyrine N-demethylase (300%) in cells obtained after decolorization indicated the involvement of these enzymes in decolorization process.The intermediates formed during the degradation of Crystal Violet were analyzed by gas chromatography and mass spectroscopy (GC/MS).It was detected the presence of N,N,N′,N"-tetramethylpararosaniline,[N,N-dimethylaminophenyl][N-methylaminophenyl] benzophenone,N,N-dimethylaminobenzaldehyde,4-methyl amino phenol and phenol.We proposed the hypothetical metabolic pathway of Crystal Violet biodegradation by A.radiobacter.Phytotoxicity and microbial toxicity study showed that Crystal Violet biodegradation metabolites were less toxic to bacteria (A.radiobacter,P.aurugenosa and A.vinelandii) contributing to soil fertility and for four kinds of plants (Sorghum bicolor,Vigna radiata,Lens culinaris and Triticum aestivum) which are most sensitive,fast growing and commonly used in Indian agriculture.

  15. Vectorization of copper complexes via biocompatible and biodegradable PLGA nanoparticles

    Science.gov (United States)

    Courant, T.; Roullin, V. G.; Cadiou, C.; Delavoie, F.; Molinari, M.; Andry, M. C.; Gafa, V.; Chuburu, F.

    2010-04-01

    A double emulsion-solvent diffusion approach with fully biocompatible materials was used to encapsulate copper complexes within biodegradable nanoparticles, for which the release kinetics profiles have highlighted their potential use for a prolonged circulating administration.

  16. Vectorization of copper complexes via biocompatible and biodegradable PLGA nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Courant, T; Roullin, V G; Andry, M C [Institut de Chimie Moleculaire de Reims, CNRS UMR 6229, UFR Pharmacie Reims, 51 rue Cognacq-Jay, F-51100 Reims (France); Cadiou, C; Chuburu, F [Institut de Chimie Moleculaire de Reims, CNRS UMR 6229, UFR des Sciences Exactes et Naturelles, Batiment 18-Europol' Agro, BP 1039, F-51687 Reims Cedex 2 (France); Delavoie, F [Laboratoire de Microscopie Electronique Analytique, INSERM UMRS 926, 21 rue Clement Ader, F-51685 Reims Cedex 2 (France); Molinari, M [Laboratoire de Microscopies et d' Etudes des Nanostructures, UFR des Sciences, Universite de Reims Champagne-Ardenne, 21 rue Clement Ader, F-51685 Reims Cedex 2 (France); Gafa, V, E-mail: gaelle.roullin@univ-reims.fr, E-mail: francoise.chuburu@univ-reims.fr [EA4303 ' Inflammation et Immunite de l' Epithelium Respiratoire' , IFR53, UFR de Pharmacie, Universite de Reims Champagne-Ardenne, 51 rue Cognacq-Jay, F-51100 Reims (France)

    2010-04-23

    A double emulsion-solvent diffusion approach with fully biocompatible materials was used to encapsulate copper complexes within biodegradable nanoparticles, for which the release kinetics profiles have highlighted their potential use for a prolonged circulating administration.

  17. Fade to Green: A Biodegradable Stack of Microbial Fuel Cells.

    Science.gov (United States)

    Winfield, Jonathan; Chambers, Lily D; Rossiter, Jonathan; Stinchcombe, Andrew; Walter, X Alexis; Greenman, John; Ieropoulos, Ioannis

    2015-08-24

    The focus of this study is the development of biodegradable microbial fuel cells (MFCs) able to produce useful power. Reactors with an 8 mL chamber volume were designed using all biodegradable products: polylactic acid for the frames, natural rubber as the cation-exchange membrane and egg-based, open-to-air cathodes coated with a lanolin gas diffusion layer. Forty MFCs were operated in various configurations. When fed with urine, the biodegradable stack was able to power appliances and was still operational after six months. One useful application for this truly sustainable MFC technology includes onboard power supplies for biodegradable robotic systems. After operation in remote ecological locations, these could degrade harmlessly into the surroundings to leave no trace when the mission is complete.

  18. Vectorization of copper complexes via biocompatible and biodegradable PLGA nanoparticles.

    Science.gov (United States)

    Courant, T; Roullin, V G; Cadiou, C; Delavoie, F; Molinari, M; Andry, M C; Gafa, V; Chuburu, F

    2010-04-23

    A double emulsion-solvent diffusion approach with fully biocompatible materials was used to encapsulate copper complexes within biodegradable nanoparticles, for which the release kinetics profiles have highlighted their potential use for a prolonged circulating administration.

  19. Biodegradable kinetics of plastics under controlled composting conditions.

    Science.gov (United States)

    Leejarkpai, Thanawadee; Suwanmanee, Unchalee; Rudeekit, Yosita; Mungcharoen, Thumrongrut

    2011-06-01

    This study models and evaluates the kinetics of C-CO(2) evolution during biodegradation of plastic materials including Polyethylene (PE), PE/starch blend (PE/starch), microcrystalline cellulose (MCE), and Polylactic acid (PLA). The aerobic biodegradation under controlled composting conditions was monitorated according to ISO 14855-1, 2004. The kinetics model was based on first order reaction in series with a flat lag phase. A non-linear regression technique was used to analyze the experimental data. SEM studies of the morphology of the samples before and after biodegradation testing were used to confirm the biodegradability of plastics and the accuracy of the model. The work showed that MCE and PLA produced the high amounts of C-CO(2) evolution, which gave readily hydrolysable carbon values of 55.49% and 40.17%, respectively with readily hydrolysis rates of 0.338 day(-1) and 0.025 day(-1), respectively. Whereas, a lower amount of C-CO(2) evolution was found in PE/starch, which had a high concentration of moderately hydrolysable carbon of 97.74% and a moderate hydrolysis rate of 0.00098 day(-1). The mineralization rate of PLA was 0.500 day(-1) as a lag phase was observed at the beginning of the biodegradability test. No lag phase was observed in the biodegradability testing of the PE/starch and MCE. The mineralization rates of the PE/starch and MCE were found to be 1.000 day(-1), and 1.234 day(-1), respectively. No C-CO(2) evolution was observed during biodegradability testing of PE, which was used for reference as a non-biodegradable plastics sample.

  20. Electro-Fenton pretreatment for the improvement of tylosin biodegradability

    OpenAIRE

    Ferrag-Siagh, Fatiha; Fourcade, Florence; Soutrel, Isabelle; Aït-Amar, Hamid; Djelal, Hayet; Amrane, Abdelatif

    2014-01-01

    International audience; The feasibility of an electro-Fenton process to treat tylosin (TYL), a non-biodegradable antibiotic, was examined in a discontinuous electrochemical cell with divided cathodic and anodic compartments. Only 15 min electrolysis was needed for total tylosin degradation using a carbon felt cathode and a platinum anode; while 6 h electrolysis was needed to achieve high oxidation and mineralization yields, 96 and 88 % respectively. Biodegradability improvement was shown sinc...

  1. Improvement of Landfill Leachate Biodegradability with Ultrasonic Process

    OpenAIRE

    Mahvi Amirhossein; Roodbari Aliakbar; Nabizadeh Nodehi Ramin; Naseri Simin; Dehghani Mohammadhadii; Alimohammadi Mahmood

    2012-01-01

    Leachate from mature landfills is typically characterized by high ammonium (NH4+) content, low biodegradability (low BOD5/COD ratio) and high fraction of refractory and large organic molecules such as humic and fulvic acids. Mature leachate effluents are known to contain recalcitrant and/or non-biodegradable organic substances and biological processes are not efficient in these cases. A promising alternative to complete oxidation of biorecalcitrant leachate is the use of ultrasonic process as...

  2. Monitoring aromatic hydrocarbon biodegradation by functional marker genes

    Energy Technology Data Exchange (ETDEWEB)

    Nyyssoenen, Mari [Technical Research Centre of Finland, Espoo (Finland)], E-mail: mari.nyyssonen@vtt.fi; Piskonen, Reetta; Itaevaara, Merja [Technical Research Centre of Finland, Espoo (Finland)

    2008-07-15

    The development of biological treatment technologies for contaminated environments requires tools for obtaining direct information about the biodegradation of specific contaminants. The potential of functional gene array analysis to monitor changes in the amount of functional marker genes as indicators of contaminant biodegradation was investigated. A prototype functional gene array was developed for targeting key functions in the biodegradation of naphthalene, toluene and xylenes. Internal standard probe based normalization was introduced to facilitate comparison across multiple samples. Coupled with one-colour hybridization, the signal normalization improved the consistency among replicate hybridizations resulting in better discrimination for the differences in the amount of target DNA. During the naphthalene biodegradation in a PAH-contaminated soil slurry microcosm, the normalized hybridization signals in naphthalene catabolic gene probes were in good agreement with the amount of naphthalene-degradation genes and the production of {sup 14}CO{sub 2}. Gene arrays provide efficient means for monitoring of contaminant biodegradation in the environment. - Functional gene array analysis coupled with one-colour hybridization and internal standard based signal normalization provides efficient tool for monitoring contaminant biodegradation processes.

  3. Saponification of fatty slaughterhouse wastes for enhancing anaerobic biodegradability.

    Science.gov (United States)

    Battimelli, Audrey; Carrère, Hélène; Delgenès, Jean-Philippe

    2009-08-01

    The thermochemical pretreatment by saponification of two kinds of fatty slaughterhouse waste--aeroflotation fats and flesh fats from animal carcasses--was studied in order to improve the waste's anaerobic degradation. The effect of an easily biodegradable compound, ethanol, on raw waste biodegradation was also examined. The aims of the study were to enhance the methanisation of fatty waste and also to show a link between biodegradability and bio-availability. The anaerobic digestion of raw waste, saponified waste and waste with a co-substrate was carried out in batch mode under mesophilic and thermophilic conditions. The results showed little increase in the total volume of biogas, indicating a good biodegradability of the raw wastes. Mean biogas volume reached 1200 mL/g VS which represented more than 90% of the maximal theoretical biogas potential. Raw fatty wastes were slowly biodegraded whereas pretreated wastes showed improved initial reaction kinetics, indicating a better initial bio-availability, particularly for mesophilic runs. The effects observed for raw wastes with ethanol as co-substrate depended on the process temperature: in mesophilic conditions, an initial improvement was observed whereas in thermophilic conditions a significant decrease in biodegradability was observed.

  4. Biodegradation of creosote compounds: Comparison of experiments at different scales

    DEFF Research Database (Denmark)

    Broholm, K.; Arvin, Erik

    2001-01-01

    This paper compares the results of biodegradation experiments with creosote compounds performed at different scales. The experiments include field observations, field experiments, large-scale intact laboratory column experiments, model fracture experiments, and batch experiments. Most of the expe......This paper compares the results of biodegradation experiments with creosote compounds performed at different scales. The experiments include field observations, field experiments, large-scale intact laboratory column experiments, model fracture experiments, and batch experiments. Most...... of the experiments were conducted with till or ground water from the field site at Ringe on the island of Funen. Although the experiments were conducted on different scales, they revealed that some phenomena-e.g., an extensive biodegradation potential of several of the creosote compounds, the inhibitory influence...... of the pyrroles on the biodegradation of benzene, and the biodegradation of benzothiophene occurs only in the presence of a primary substrate. The experiments show that some biodegradation processes of organic compounds may be common to different microorganisms....

  5. Biodegradable and edible gelatine actuators for use as artificial muscles

    Science.gov (United States)

    Chambers, L. D.; Winfield, J.; Ieropoulos, I.; Rossiter, J.

    2014-03-01

    The expense and use of non-recyclable materials often requires the retrieval and recovery of exploratory robots. Therefore, conventional materials such as plastics and metals in robotics can be limiting. For applications such as environmental monitoring, a fully biodegradable or edible robot may provide the optimum solution. Materials that provide power and actuation as well as biodegradability provide a compelling dimension to future robotic systems. To highlight the potential of novel biodegradable and edible materials as artificial muscles, the actuation of a biodegradable hydrogel was investigated. The fabricated gelatine based polymer gel was inexpensive, easy to handle, biodegradable and edible. The electro-mechanical performance was assessed using two contactless, parallel stainless steel electrodes immersed in 0.1M NaOH solution and fixed 40 mm apart with the strip actuator pinned directly between the electrodes. The actuation displacement in response to a bias voltage was measured over hydration/de-hydration cycles. Long term (11 days) and short term (1 hour) investigations demonstrated the bending behaviour of the swollen material in response to an electric field. Actuation voltage was low (biodegradable and edible artificial muscles could help to drive the development of environmentally friendly robotics.

  6. Calcium orthophosphate coatings on magnesium and its biodegradable alloys.

    Science.gov (United States)

    Dorozhkin, Sergey V

    2014-07-01

    Biodegradable metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Of these metals, magnesium (Mg) and its biodegradable alloys appear to be particularly attractive candidates due to their non-toxicity and as their mechanical properties match those of bones better than other metals do. Being light, biocompatible and biodegradable, Mg-based metallic implants have several advantages over other implantable metals currently in use, such as eliminating both the effects of stress shielding and the requirement of a second surgery for implant removal. Unfortunately, the fast degradation rates of Mg and its biodegradable alloys in the aggressive physiological environment impose limitations on their clinical applications. This necessitates development of implants with controlled degradation rates to match the kinetics of bone healing. Application of protective but biocompatible and biodegradable coatings able to delay the onset of Mg corrosion appears to be a reasonable solution. Since calcium orthophosphates are well tolerated by living organisms, they appear to be the excellent candidates for such coatings. Nevertheless, both the high chemical reactivity and the low melting point of Mg require specific parameters for successful deposition of calcium orthophosphate coatings. This review provides an overview of current coating techniques used for deposition of calcium orthophosphates on Mg and its biodegradable alloys. The literature analysis revealed that in all cases the calcium orthophosphate protective coatings both increased the corrosion resistance of Mg-based metallic biomaterials and improved their surface biocompatibility.

  7. An adsorption-release-biodegradation system for simultaneous biodegradation of phenol and ammonium in phenol-rich wastewater.

    Science.gov (United States)

    Wang, Ying; Chen, Hu; Liu, Yu-Xiang; Ren, Rui-Peng; Lv, Yong-Kang

    2016-07-01

    The feasibility of simultaneous biodegradation of phenol and ammonium in phenol-rich wastewater was evaluated in a reusable system, which contained macroporous adsorption resin and Alcaligenes faecalis strain WY-01. In the system, up to 6000mg/L phenol could be completely degraded by WY-01; meanwhile, 99.03±3.95% of ammonium was removed from the initial concentration of 384mg/L. This is the first study to show the capability of single strain in simultaneous removal of ammonium and phenol in wastewater containing such high concentrations of phenol. Moreover, the resin was regenerated during the biodegradation process without any additional manipulations, indicating the system was reusable. Furthermore, enzyme assay, gene expression patterns, HPLC-MS and gas chromatography analysis confirmed that phenol biodegradation accompanied with aerobic nitrifier denitrification process. Results imply that the reusable system provides a novel strategy for more efficient biodegradation of phenol and ammonium contained in some particular industrial wastewater.

  8. Evaluation of the biodegradation of Alaska North Slope oil in microcosms using the biodegradation model BIOB

    Directory of Open Access Journals (Sweden)

    Jagadish eTorlapati

    2014-05-01

    Full Text Available We present the details of a numerical model, BIOB that is capable of simulating the biodegradation of oil entrapped in the sediment. The model uses Monod kinetics to simulate the growth of bacteria in the presence of nutrients and the subsequent consumption of hydrocarbons. The model was used to simulate experimental results of Exxon Valdez oil biodegradation in laboratory columns (Venosa et al. (2010. In that study, samples were collected from three different islands: Eleanor Island (EL107, Knight Island (KN114A, and Smith Island (SM006B, and placed in laboratory microcosms for a duration of 168 days to investigate oil bioremediation through natural attenuation and nutrient amendment. The kinetic parameters of the BIOB model were estimated by fitting to the experimental data using a parameter estimation tool based on Genetic Algorithms (GA. The parameter values of EL107 and KN114A were similar whereas those of SM006B were different from the two other sites; in particular biomass growth at SM006B was four times slower than at the other two islands. Grain size analysis from each site revealed that the specific surface area per unit mass of sediment was considerably lower at SM006B, which suggest that the surface area of sediments is a key control parameter for microbial growth in sediments. Comparison of the BIOB results with exponential decay curves fitted to the data indicated that BIOB provided better fit for KN114A and SM006B in nutrient amended treatments, and for EL107 and KN114A in natural attenuation. In particular, BIOB was able to capture the initial slow biodegradation due to the lag phase in microbial growth. Sensitivity analyses revealed that oil biodegradation at all three locations were sensitive to nutrient concentration whereas SM006B was sensitive to initial biomass concentration due to its slow growth rate. Analyses were also performed to compare the half-lives of individual compounds with the decay rate of the overall PAH.

  9. Biodegradation of sugarcane bagasse by Pleurotus citrinopileatus.

    Science.gov (United States)

    Pandey, V K; Singh, M P; Srivastava, A K; Vishwakarma, S K; Takshak, S

    2012-12-22

    The chemically as well as hot water treated agrowaste sugarcane bagasse was subjected to degradation by Pleurotus citrinopileatus. The fungus degraded lignin, cellulose, hemicellulose, and carbon content of both chemically as well as hot water treated waste and produced in turn the edible and nutritious fruiting body. Biodegradation of the waste in terms of loss of lignin, cellulose and hemicellulose showed positive correlation with cellulases, xylanase, laccase and polyphenol oxidase (PPO) activity of the fungus. During mycelial growth of the fungus, lignin degradation was faster and during fructification, lignin degradation was slower than cellulose and hemicellulose. The carbon content of the sugarcane bagasse decreased while, nitrogen content increased during degradation of the waste. Hot water treated substrate supported better production of enzymatic activity and degraded more efficiently than chemically sterilized substrate. The total yield and biological efficiency of the mushroom was maximum on the hot water treated substrates. Degradation of the hot water treated sugarcane bagasse was better and faster than chemically treated substrates.

  10. Electrospun biodegradable polymers loaded with bactericide agents

    Directory of Open Access Journals (Sweden)

    Ramaz Katsarava

    2016-03-01

    Full Text Available Development of materials with an antimicrobial activity is fundamental for different sectors, including medicine and health care, water and air treatment, and food packaging. Electrospinning is a versatile and economic technique that allows the incorporation of different natural, industrial, and clinical agents into a wide variety of polymers and blends in the form of micro/nanofibers. Furthermore, the technique is versatile since different constructs (e.g. those derived from single electrospinning, co-electrospinning, coaxial electrospinning, and miniemulsion electrospinning can be obtained to influence the ability to load agents with different characteristics and stability and to modify the release behaviour. Furthermore, antimicrobial agents can be loaded during the electrospinning process or by a subsequent coating process. In order to the mitigate burst release effect, it is possible to encapsulate the selected drug into inorganic nanotubes and nanoparticles, as well as in organic cyclodextrine polysaccharides. In the same way, processes that involve covalent linkage of bactericide agents during surface treatment of electrospun samples may also be considered. The present review is focused on more recent works concerning the electrospinning of antimicrobial polymers. These include chitosan and common biodegradable polymers with activity caused by the specific load of agents such as metal and metal oxide particles, quaternary ammonium compounds, hydantoin compounds, antibiotics, common organic bactericides, and bacteriophages.

  11. Biodegradable mesoporous delivery system for biomineralization precursors

    Science.gov (United States)

    Yang, Hong-ye; Niu, Li-na; Sun, Jin-long; Huang, Xue-qing; Pei, Dan-dan; Huang, Cui; Tay, Franklin R

    2017-01-01

    Scaffold supplements such as nanoparticles, components of the extracellular matrix, or growth factors have been incorporated in conventional scaffold materials to produce smart scaffolds for tissue engineering of damaged hard tissues. Due to increasing concerns on the clinical side effects of using large doses of recombinant bone-morphogenetic protein-2 in bone surgery, it is desirable to develop an alternative nanoscale scaffold supplement that is not only osteoinductive, but is also multifunctional in that it can perform other significant bone regenerative roles apart from stimulation of osteogenic differentiation. Because both amorphous calcium phosphate (ACP) and silica are osteoinductive, a biodegradable, nonfunctionalized, expanded-pore mesoporous silica nanoparticle carrier was developed for loading, storage, and sustained release of a novel, biosilicification-inspired, polyamine-stabilized liquid precursor phase of ACP for collagen biomineralization and for release of orthosilicic acid, both of which are conducive to bone growth. Positively charged poly(allylamine)-stabilized ACP (PAH-ACP) could be effectively loaded and released from nonfunctionalized expanded-pore mesoporous silica nanoparticles (pMSN). The PAH-ACP released from loaded pMSN still retained its ability to infiltrate and mineralize collagen fibrils. Complete degradation of pMSN occurred following unloading of their PAH-ACP cargo. Because PAH-ACP loaded pMSN possesses relatively low cytotoxicity to human bone marrow-derived mesenchymal stem cells, these nanoparticles may be blended with any osteoconductive scaffold with macro- and microporosities as a versatile scaffold supplement to enhance bone regeneration. PMID:28182119

  12. Biodegradation of sulfanilic acid by Pseudomonas paucimobilis.

    Science.gov (United States)

    Perei, K; Rákhely, G; Kiss, I; Polyák, B; Kovács, K L

    2001-01-01

    An aerobic bacterium, isolated from a contaminated site, was able to degrade sulfanilic acid (4-aminobenzenesulfonic acid) and was identified as Pseudomonas paucimobilis. The isolate could grow on sulfanilic acid (SA) as its sole carbon and nitrogen source and metabolized the target compound to biomass. The bioconversion capacity depended on the sulfanilic acid concentration; greater than 98% elimination of the hazardous compound was achieved at low (10 mM) sulfanilic acid concentration, and the yield was greater than 70% at 50 mM concentration of the contaminant. The maximum conversion rate was 1.5 mmol sulfanilic acid/h per mg wet cells at 30 degrees C. Ca-alginate-phytagel proved a good matrix for immobilization of P. paucimobilis, with essentially unaltered biodegradation activity. Removal of sulfanilic acid from contaminated industrial waste water was demonstrated. SDS-PAGE analysis of the crude extract revealed novel proteins appearing upon induction with sulfanilic acid and related compounds, which indicated alternative degradation mechanisms involving various inducible enzymes.

  13. Biodegradation and bioremediation of endosulfan contaminated soil.

    Science.gov (United States)

    Kumar, Mohit; Lakshmi, C Vidya; Khanna, Sunil

    2008-05-01

    Among the three mixed bacterial culture AE, BE, and CE, developed by enrichment technique with endosulfan as sole carbon source, consortium CE was found to be the most efficient with 72% and 87% degradation of alpha-endosulfan and beta-endosulfan, respectively, in 20 days. In soil microcosm, consortium AE, BE and CE degraded alpha-endosulfan by 57%, 88% and 91%, respectively, whereas beta-endosulfan was degraded by 4%, 60% and 67% after 30 days. Ochrobacterum sp., Arthrobacter sp., and Burkholderia sp., isolated and identified on the basis of 16s rDNA gene sequence, individually showed in situ biodegradation of alpha-endosulfan in contaminated soil microcosm by 61, 73, and 74, respectively, whereas degradation of beta-endosulfan was 63, 75, and 62, respectively, after 6 weeks of incubation over the control which showed 26% and 23 % degradation of alpha-endosulfan and beta-endosulfan, respectively. Population survival of Ochrobacterum sp., Arthrobacter sp., and Burkholderia sp., by plate count on Luria Broth with carbenicillin showed 75-88% survival of these isolates as compared to 36-48% of survival obtained from PCR fingerprinting. Arthrobacter sp. oxidized endosulfan to endosulfan sulfate which was further metabolized but no known metabolite of endosulfan sulfate was detected.

  14. Biodegradation of chlorpyrifos by bacterial genus Pseudomonas.

    Science.gov (United States)

    Gilani, Razia Alam; Rafique, Mazhar; Rehman, Abdul; Munis, Muhammad Farooq Hussain; Rehman, Shafiq Ur; Chaudhary, Hassan Javed

    2016-02-01

    Chlorpyrifos is an organophosphorus pesticide commonly used in agriculture. It is noxious to a variety of organisms that include living soil biota along with beneficial arthropods, fish, birds, humans, animals, and plants. Exposure to chlorpyrifos may cause detrimental effects as delayed seedling emergence, fruit deformities, and abnormal cell division. Contamination of chlorpyrifos has been found about 24 km from the site of its application. There are many physico-chemical and biological approaches to remove organophosphorus pesticides from the ecosystem, among them most promising is biodegradation. The 3,5,6-trichloro-2-pyridinol (TCP) and diethylthiophosphate (DETP) as primary products are made when chlorpyrifos is degraded by soil microorganisms which further break into nontoxic metabolites as CO(2), H(2)O, and NH(3). Pseudomonas is a diversified genus possessing a series of catabolic pathways and enzymes involved in pesticide degradation. Pseudomonas putida MAS-1 is reported to be more efficient in chlorpyrifos degradation by a rate of 90% in 24 h among Pseudomonas genus. The current review analyzed the comparative potential of bacterial species in Pseudomonas genus for degradation of chlorpyrifos thus, expressing an ecofriendly approach for the treatment of environmental contaminants like pesticides.

  15. Biodegradation of wheat straw by Pleurotus ostreatus.

    Science.gov (United States)

    Pandey, V K; Singh, M P

    2014-12-24

    Wheat straw pretreated with chemicals as well as hot water was subjected to degradation by edible mushroom Pleurotus ostreatus. Lignin, cellulose and hemicelluloses component of both chemically as well as hot water treated wheat straw was degraded by the fungus and in turn the edible and nutritious fruiting body of the mushroom was produced. Biodegradation of wheat straw in terms of loss of lignin, cellulose and hemicellulose showed positive correlation with cellulases, xylanase, laccase and polyphenol oxidase (PPO) activity of the fungus. During vegetative growth of the fungus, lignin degradation was faster and during fructification, lignin degradation was slower than cellulose and hemicellulose. The carbon content of the wheat straw decreased while, nitrogen content increased during degradation of the waste. Hot water treated wheat straw supported better production of enzymatic activity and degraded more efficiently than chemically sterilized substrate. The cumulative yield and biological efficiency (BE) of the mushroom was maximum on the hot water treated substrate. Degradation of the hot water treated wheat straw was better and faster than chemically treated substrate.

  16. Biodegradation characteristics of imazaquin and imazethapyr

    Energy Technology Data Exchange (ETDEWEB)

    Cantwell, J.R.; Liebl, R.A.; Slife, F.W.

    1989-11-01

    The extent of {sup 14}C-imazaquin and {sup 14}C-imazethapyr abiotic vs biotic degradation in soil was investigated. Degradation was measured in an in vitro system which allowed 90% recovery of applied herbicide. Triallate biodegradation is well documented and therefore used as a standard. Herbicide degradation was compared in two soils, a Cisne silt loam and a Drummer silty clay loam. Herbicide degradation in gamma-irradiated soil was compared to fresh soil. Biomass quantities were measured for the duration of the experiments. {sup 14}CO{sub 2} evolution, extractable parent, metabolites, and unextractable residue were measured. After 12 weeks of incubation, 95% of the radioactivity could be extracted as parent from sterilized soil. In unsterilized soil, imazaquin and imazethapyr degraded at a similar rate which was dependent upon soil type. All herbicides degraded slower in the Drummer soil and triallate degraded two to three times faster than the imidazolinones in either soil. {sup 14}C-imazaquin degradation products included {sup 14}CO{sub 2} and unextractable residues. The major product from {sup 14}C-imazethapyr degradation was {sup 14}CO{sub 2}. Evolution of {sup 14}CO{sub 2} from an imazethapyr-treated Cisne soil, containing a serial dilution of activated charcoal, demonstrated that adsorption of herbicide was negatively correlated with degradation. Therefore imidazolinone microbial degradation is regulated by the amount of herbicide in soil solution as determined by soil characteristics.

  17. Resisting protein adsorption on biodegradable polyester brushes.

    Science.gov (United States)

    Hu, Xinfang; Gorman, Christopher B

    2014-08-01

    The protein adsorption and degradation behaviors of poly(lactic acid), poly(glycolic acid) (PGA) and poly(ε-caprolactone) (PCL) brushes and their co-polymer brushes with oligo(ethylene glycol) (OEG) were studied. Both brush structure and relative amount of OEG and polyester were found to be important to the protein resistance of the brushes. A protein-resisting surface can be fabricated either by using OEG as the top layer of a copolymer brush or by increasing the amount of OEG relative to polyester when using a hydroxyl terminated OEG (OEG-OH) and a methoxy terminated OEG (OEG-OMe) mixture as the substrate layer. The degradation of single polyester brushes and their co-polymer brushes using OEG-OH as a substrate layer or using OEG as a top layer was hindered. This phenomenon was rationalized by the inhibition of the proposed back-biting process as the hydroxy end groups of polyester were blocked by OEG molecules. Among these brushes tested, PGA co-polymer brushes using the methoxy/hydroxyl OEG mixture as the substrate layer proved to be both protein-resistant and degradable due to the relatively large amount of OEG moieties and the good biodegradability of PGA.

  18. [Biodegradable polyhydroxyalkanoates as carriers for antitumor agents].

    Science.gov (United States)

    Shishatskaia, E I; Zhemchugova, A V; Volova, T G

    2005-01-01

    The possible use of biodegradable polyethers of microbial origin (polyhydroxyalkanoates) as matrices for deposition of daunorubicin (rubomycin), an antitumor anthracycline, was studied. The tablet dosage form of various rubomycin load (from 1 to 60% w/w) was prepared by cold compaction under pressure. The in vitro kinetics of the rubomycin release from the polymer matrix was investigated. It was shown that the rubomycin release to the medium resulted from the drug solution and diffusion within various periods, from tens hours to several weeks and months depending on the load. When the rubomycin load was under 20% w/w the drug release was prolonged and directly proportional to the observation time. When the rubomycin concentration was under 5%, the drug release kinetics corresponded to the type of the zero order reaction with prolonged release without sharp efflux at the initial stage of the observation. The findings showed that the polyhydroxyalkanoates were applicable as matrices for deposition of rubomycin and preparation of drugs with prolonged action.

  19. Biodegradation and flushing of MBT wastes

    Energy Technology Data Exchange (ETDEWEB)

    Siddiqui, A.A., E-mail: aasiddiqui.cv@amu.ac.in [Department of Civil Engineering, Aligarh Muslim University, Aligarh 202002 (India); Richards, D.J.; Powrie, W. [Waste Management Research Group, Faculty of Engineering and the Environment, University of Southampton, Southampton SO17 1BJ (United Kingdom)

    2013-11-15

    Highlights: • Stabilization was achieved for MBT wastes of different degrees of pretreatment. • About 92% reduction in the gas generation compared with raw MSW. • Pretreatment resulted in reduced TOC, nitrogen and heavy metals in leachate. • A large proportion of carbon and nitrogen remained in the waste material. - Abstract: Mechanical–biological treatment (MBT) processes are increasingly being adopted as a means of diverting biodegradable municipal waste (BMW) from landfill, for example to comply with the EU Landfill Directive. However, there is considerable uncertainty concerning the residual pollution potential of such wastes. This paper presents the results of laboratory experiments on two different MBT waste residues, carried out to investigate the remaining potential for the generation of greenhouse gases and the flushing of contaminants from these materials when landfilled. The potential for gas generation was found to be between 8% and 20% of that for raw MSW. Pretreatment of the waste reduced the potential for the release of organic carbon, ammoniacal nitrogen, and heavy metal contents into the leachate; and reduced the residual carbon remaining in the waste after final degradation from ∼320 g/kg dry matter for raw MSW to between 183 and 195 g/kg dry matter for the MBT wastes.

  20. Biodegradation of Ochratoxin A by Aspergillus tubingensis Isolated from Meju.

    Science.gov (United States)

    Cho, Sung Min; Jeong, Seong Eun; Lee, Kyu Ri; Sudhani, Hemanth P K; Kim, Myunghee; Hong, Sung-Yong; Chung, Soo Hyun

    2016-10-28

    Ochratoxin A (OTA), a mycotoxin, contaminates agricultural products and poses a serious threat to public health worldwide. Microbiological methods are known to be a promising approach for OTA biodegradation because physical and chemical methods have practical limitations. In the present study, a total of 130 fungal isolates obtained from 65 traditional Korean meju (a fermented starter for fermentation of soybeans) samples were examined for OTA-biodegradation activity using thin-layer chromatography. Two fungal isolates were selected for OTA-biodegradation activity and were identified as Aspergillus tubingensis M036 and M074 through sequence analysis of the beta-tubulin gene. After culturing both A. tubingensis isolates in Soytone-Czapek medium containing OTA (40 ng/ml), OTA-biodegradation activity was analyzed using high-performance liquid chromatography (HPLC). Both A. tubingensis strains degraded OTA by more than 95.0% after 14 days, and the HPLC analysis showed that the OTA biodegradation by the A. tubingensis strains led to the production of ochratoxin α, which is much less toxic than OTA. Moreover, crude enzymes from the cultures of A. tubingensis M036 and M074 led to OTA biodegradation of 97.5% and 91.3% at pH 5, and 80.3% and 75.3% at pH 7, respectively, in a buffer solution containing OTA (40 ng/ml) after 24 h. In addition, the OTA-biodegrading fungi did not exhibit OTA production activity. Our data suggest that A. tubingensis isolates and their enzymes have the potential for practical application to reduce levels of OTA in food and feed.

  1. Microneedles array with biodegradable tips for transdermal drug delivery

    Science.gov (United States)

    Iliescu, Ciprian; Chen, Bangtao; Wei, Jiashen; Tay, Francis E. H.

    2008-12-01

    The paper presented an enhancement solution for transdermal drug delivery using microneedles array with biodegradable tips. The microneedles array was fabricated by using deep reactive ion etching (DRIE) and the biodegradable tips were made to be porous by electrochemical etching process. The porous silicon microneedle tips can greatly enhance the transdermal drug delivery in a minimum invasion, painless, and convenient manner, at the same time; they are breakable and biodegradable. Basically, the main problem of the silicon microneedles consists of broken microneedles tips during the insertion. The solution proposed is to fabricate the microneedle tip from a biodegradable material - porous silicon. The silicon microneedles are fabricated using DRIE notching effect of reflected charges on mask. The process overcomes the difficulty in the undercut control of the tips during the classical isotropic silicon etching process. When the silicon tips were formed, the porous tips were then generated using a classical electrochemical anodization process in MeCN/HF/H2O solution. The paper presents the experimental results of in vitro release of calcein and BSA with animal skins using a microneedle array with biodegradable tips. Compared to the transdermal drug delivery without any enhancer, the microneedle array had presented significant enhancement of drug release.

  2. Biodegradation of crude oil saturated fraction supported on clays.

    Science.gov (United States)

    Ugochukwu, Uzochukwu C; Jones, Martin D; Head, Ian M; Manning, David A C; Fialips, Claire I

    2014-02-01

    The role of clay minerals in crude oil saturated hydrocarbon removal during biodegradation was investigated in aqueous clay/saturated hydrocarbon microcosm experiments with a hydrocarbon degrading microorganism community. The clay minerals used for this study were montmorillonite, palygorskite, saponite and kaolinite. The clay mineral samples were treated with hydrochloric acid and didecyldimethylammonium bromide to produce acid activated- and organoclays respectively which were used in this study. The production of organoclay was restricted to only montmorillonite and saponite because of their relative high CEC. The study indicated that acid activated clays, organoclays and unmodified kaolinite, were inhibitory to biodegradation of the hydrocarbon saturates. Unmodified saponite was neutral to biodegradation of the hydrocarbon saturates. However, unmodified palygorskite and montmorillonite were stimulatory to biodegradation of the hydrocarbon saturated fraction and appears to do so as a result of the clays' ability to provide high surface area for the accumulation of microbes and nutrients such that the nutrients were within the 'vicinity' of the microbes. Adsorption of the saturated hydrocarbons was not significant during biodegradation.

  3. Study on biodegradation process of lignin by FTIR and DSC.

    Science.gov (United States)

    Liu, Yang; Hu, Tianjue; Wu, Zhengping; Zeng, Guangming; Huang, Danlian; Shen, Ying; He, Xiaoxiao; Lai, Mingyong; He, Yibin

    2014-12-01

    The biodegradation process of lignin by Penicillium simplicissimum was studied to reveal the lignin biodegradation mechanisms. The biodegradation products of lignin were detected using Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometer, different scanning calorimeter (DSC), and stereoscopic microscope. The analysis of FTIR spectrum showed the cleavage of various ether linkages (1,365 and 1,110 cm(-1)), oxidation, and demethylation (2,847 cm(-1)) by comparing the different peak values in the corresponding curve of each sample. Moreover, the differences (Tm and ΔHm values) between the DSC curves indirectly verified the FTIR analysis of biodegradation process. In addition, the effects of adding hydrogen peroxide (H2O2) to lignin biodegradation process were analyzed, which indicated that H2O2 could accelerate the secretion of the MnP and LiP and improve the enzymes activity. What is more, lignin peroxidase and manganese peroxidase catalyzed the lignin degradation effectively only when H2O2 was presented.

  4. Biodegradation and bioremediation of hydrocarbons in extreme environments.

    Science.gov (United States)

    Margesin, R; Schinner, F

    2001-09-01

    Many hydrocarbon-contaminated environments are characterized by low or elevated temperatures, acidic or alkaline pH, high salt concentrations, or high pressure, Hydrocarbon-degrading microorganisms, adapted to grow and thrive in these environments, play an important role in the biological treatment of polluted extreme habitats. The biodegradation (transformation or mineralization) of a wide range of hydrocarbons, including aliphatic, aromatic, halogenated and nitrated compounds, has been shown to occur in various extreme habitats. The biodegradation of many components of petroleum hydrocarbons has been reported in a variety of terrestrial and marine cold ecosystems. Cold-adapted hydrocarbon degraders are also useful for wastewater treatment. The use of thermophiles for biodegradation of hydrocarbons with low water solubility is of interest, as solubility and thus bioavailability, are enhanced at elevated temperatures. Thermophiles, predominantly bacilli, possess a substantial potential for the degradation of environmental pollutants, including all major classes. Indigenous thermophilic hydrocarbon degraders are of special significance for the bioremediation of oil-polluted desert soil. Some studies have investigated composting as a bioremediation process. Hydrocarbon biodegradation in the presence of high salt concentrations is of interest for the bioremediation of oil-polluted salt marshes and industrial wastewaters, contaminated with aromatic hydrocarbons or with chlorinated hydrocarbons. Our knowledge of the biodegradation potential of acidophilic, alkaliphilic, or barophilic microorganisms is limited.

  5. Biodegradation of methyl parathion by Acinetobacter radioresistens USTB-04

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Biodegradation of methyl parathion (MP), a widely used organophosphorus pesticide, was investigated using a newly isolated bacterium strain Acinetobacter radioresistens USTB-04. MP at an initial concentration of 1200 mg/L could be totally biodegraded by A. radioresistens USTB-04 as the sole carbon source less than 4 d in the presence of phosphate and urea as phosphorus and nitrogen sources, respectively. Biodegradation of MP was also achieved using cell-free extract of A. radioresistens USTB-04. MP at an initial concentration of 130 mg/L was completely biodegraded in 2 h in the presence of cell-free extract with a protein concentration of 148.0mg/L, which was increased with the increase of pH from 5.0 to 8.0. Contrary to published reports, no intermediate or final degradation metabolites of MP could be observed. Thus we suggest that the cleavage of C-C bond on the benzene ring other than P-O bond may be the biodegradation pathway of MP by A. radioresistens USTB-04.

  6. Biodegradable and radically polymerized elastomers with enhanced processing capabilities.

    Science.gov (United States)

    Ifkovits, Jamie L; Padera, Robert F; Burdick, Jason A

    2008-09-01

    The development of biodegradable materials with elastomeric properties is beneficial for a variety of applications, including for use in the engineering of soft tissues. Although others have developed biodegradable elastomers, they are restricted by their processing at high temperatures and under vacuum, which limits their fabrication into complex scaffolds. To overcome this, we have modified precursors to a tough biodegradable elastomer, poly(glycerol sebacate) (PGS) with acrylates to impart control over the crosslinking process and allow for more processing options. The acrylated-PGS (Acr-PGS) macromers are capable of crosslinking through free radical initiation mechanisms (e.g., redox and photo-initiated polymerizations). Alterations in the molecular weight and % acrylation of the Acr-PGS led to changes in formed network mechanical properties. In general, Young's modulus increased with % acrylation and the % strain at break increased with molecular weight when the % acrylation was held constant. Based on the mechanical properties, one macromer was further investigated for in vitro and in vivo degradation and biocompatibility. A mild to moderate inflammatory response typical of implantable biodegradable polymers was observed, even when formed as an injectable system with redox initiation. Moreover, fibrous scaffolds of Acr-PGS and a carrier polymer, poly(ethylene oxide), were prepared via an electrospinning and photopolymerization technique and the fiber morphology was dependent on the ratio of these components. This system provides biodegradable polymers with tunable properties and enhanced processing capabilities towards the advancement of approaches in engineering soft tissues.

  7. Biodegradable HEMA-based hydrogels with enhanced mechanical properties.

    Science.gov (United States)

    Moghadam, Mohamadreza Nassajian; Pioletti, Dominique P

    2016-08-01

    Hydrogels are widely used in the biomedical field. Their main purposes are either to deliver biological active agents or to temporarily fill a defect until they degrade and are followed by new host tissue formation. However, for this latter application, biodegradable hydrogels are usually not capable to sustain any significant load. The development of biodegradable hydrogels presenting load-bearing capabilities would open new possibilities to utilize this class of material in the biomedical field. In this work, an original formulation of biodegradable photo-crosslinked hydrogels based on hydroxyethyl methacrylate (HEMA) is presented. The hydrogels consist of short-length poly(2-hydroxyethyl methacrylate) (PHEMA) chains in a star shape structure, obtained by introducing a tetra-functional chain transfer agent in the backbone of the hydrogels. They are cross-linked with a biodegradable N,O-dimethacryloyl hydroxylamine (DMHA) molecule sensitive to hydrolytic cleavage. We characterized the degradation properties of these hydrogels submitted to mechanical loadings. We showed that the developed hydrogels undergo long-term degradation and specially meet the two essential requirements of a biodegradable hydrogel suitable for load bearing applications: enhanced mechanical properties and low molecular weight degradation products. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1161-1169, 2016.

  8. Biodegradation and bioremediation of hydrocarbons in extreme environments

    Energy Technology Data Exchange (ETDEWEB)

    Margesin, R.; Schinner, F. [Innsbruck Univ. (Austria). Inst. fuer Mikrobiologie

    2001-07-01

    Many hydrocarbon-contaminated environments are characterized by low or elevated temperatures, acidic or alkaline pH, high salt concentrations, or high pressure. Hydrocarbon-degrading microorganisms, adapted to grow and thrive in these environments, play an important role in the biological treatment of polluted extreme habitats. The biodegradation (transformation or mineralization) of a wide range of hydrocarbons, including aliphatic, aromatic, halogenated and nitrated compounds, has been shown to occur in various extreme habitats. The biodegradation of many components of petroleum hydrocarbons has been reported in a variety of terrestrial and marine cold ecosystems. Cold-adapted hydrocarbon degraders are also useful for wastewater treatment. The use of thermophiles for biodegradation of hydrocarbons with low water solubility is of interest, as solubility and thus bioavailability, are enhanced at elevated temperatures. Thermophiles, predominantly bacilli, possess a substantial potential for the degradation of environmental pollutants, including all major classes. Indigenous thermophilic hydrocarbon degraders are of special significance for the bioremediation of oil-polluted desert soil. Some studies have investigated composting as a bioremediation process. Hydrocarbon biodegradation in the presence of high salt concentrations is of interest for the bioremediation of oil-polluted salt marshes and industrial wastewaters, contaminated with aromatic hydrocarbons or with chlorinated hydrocarbons. Our knowledge of the biodegradation potential of acidophilic, alkaliphilic, or barophilic microorganisms is limited. (orig.)

  9. Dual partitioning and attachment effects of rhamnolipid on pyrene biodegradation under bioavailability restrictions

    NARCIS (Netherlands)

    Congiu, E.; Parsons, J.R.; Ortega-Calvo, J.J.

    2015-01-01

    We investigated the effects of different bioavailability scenarios on the rhamnolipid-enhanced biodegradation of pyrene by the representative polycyclic aromatic hydrocarbon degrader Mycobacterium gilvum VM552. This biosurfactant enhanced biodegradation when pyrene was provided in the form of solid

  10. Biodegradable Polymers in Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Leon E. Govaert

    2009-07-01

    Full Text Available The use ofdegradable polymers in medicine largely started around the mid 20th century with their initial use as in vivo resorbing sutures. Thorough knowledge on this topic as been gained since then and the potential applications for these polymers were, and still are, rapidly expanding. After improving the properties of lactic acid-based polymers, these were no longer studied only from a scientific point of view, but also for their use in bone surgery in the 1990s. Unfortunately, after implanting these polymers, different foreign body reactions ranging from the presence of white blood cells to sterile sinuses with resorption of the original tissue were observed. This led to the misconception that degradable polymers would, in all cases, lead to inflammation and/or osteolysis at the implantation site. Nowadays, we have accumulated substantial knowledge on the issue of biocompatibility of biodegradable polymers and are able to tailor these polymers for specific applications and thereby strongly reduce the occurrence of adverse tissue reactions. However, the major issue of biofunctionality, when mechanical adaptation is taken into account, has hitherto been largely unrecognized. A thorough understanding of how to improve the biofunctionality, comprising biomechanical stability, but also visualization and sterilization of the material, together with the avoidance of fibrotic tissue formation and foreign body reactions, may greatly enhance the applicability and safety of degradable polymers in a wide area of tissue engineering applications. This review will address our current understanding of these biofunctionality factors, and will subsequently discuss the pitfalls remaining and potential solutions to solve these problems.

  11. Catechol biodegradation kinetics using Candida parapsilopsis

    Directory of Open Access Journals (Sweden)

    Maurício Rigo

    2010-04-01

    Full Text Available This study evaluated the biodegradation of catechol by a yeast strain of Candida parapsilopsis in standard medium in Erlenmeyer flasks. Results shown that the highest concentration of catechol caused the longer lag period, demonstrating that acclimatized cultures could completely degrade an initial catechol concentration of 910 mg/L within 48 h. Haldane's model validated the experimental data adequately for growth kinetics over the studied catechol concentration ranges of 36 to 910 mg/L. The constants obtained for this model were µmax = 0.246 h-1, Ks = 16.95 mg/L and Ki = 604.85 mg/L.Neste trabalho foi estudada a biodegradação de catecol em frascos de Erlenmeyers em água residuária sintética pela levedura Candida parapsilopsis. As respostas dos ensaios cinéticos mostraram que altas concentrações de catecol ocasionaram uma fase lag longa para a levedura. Portanto, a aclimatização da cultura de levedura empregada para biodegradação de catecol é de fundamental importância, sendo possível reduzir toda a concentração inicial de catecol da água residuária sintética de 910 mg/L em 48 horas. Os dados experimentais da cinética de biodegradação do catecol foram ajustados pelo modelo de Haldane adequadamente, sobre a faixa de concentração de catecol investigada de 36 a 910 mg/L. Os parâmetros cinéticos obtidos do modelo de Haldane foram: µmax = 0,246 h-1, Ks = 16,95 mg/L e Ki = 604,85 mg/L.

  12. Design of biodegradable particles for protein delivery.

    Science.gov (United States)

    Vila, A; Sánchez, A; Tobío, M; Calvo, P; Alonso, M J

    2002-01-17

    Major research issues in protein delivery include the stabilization of proteins in delivery devices and the design of appropriate protein carriers in order to overcome mucosal barriers. We have attempted to combine both issues through the conception of new biodegradable polymer nanoparticles: (i) poly(ethylene glycol) (PEG)-coated poly(lactic acid) (PLA) nanoparticles, chitosan (CS)-coated poly(lactic acid-glycolic acid (PLGA) nanoparticles and chitosan (CS) nanoparticles. These nanoparticles have been tested for their ability to load proteins, to deliver them in an active form, and to transport them across the nasal and intestinal mucosae. Additionally, the stability of some of these nanoparticles in simulated physiological fluids has been studied. Results showed that the PEG coating improves the stability of PLA nanoparticles in the gastrointestinal fluids and helps the transport of the encapsulated protein, tetanus toxoid, across the intestinal and nasal mucosae. Furthermore, intranasal administration of these nanoparticles provided high and long-lasting immune responses. On the other hand, the coating of PLGA nanoparticles with the mucoadhesive polymer CS improved the stability of the particles in the presence of lysozyme and enhanced the nasal transport of the encapsulated tetanus toxoid. Finally, nanoparticles made solely of CS were also stable upon incubation with lysozyme. Moreover, these particles were very efficient in improving the nasal absorption of insulin as well as the local and systemic immune responses to tetanus toxoid, following intranasal administration. In summary, these results show that a rational modification in the composition and structure of the nanoparticles, using safe materials, increases the prospects of their usefulness for mucosal protein delivery and transport.

  13. Biodegradation of 4-nitroaniline by plant-growth promoting Acinetobacter sp. AVLB2 and toxicological analysis of its biodegradation metabolites.

    Science.gov (United States)

    Silambarasan, Sivagnanam; Vangnai, Alisa S

    2016-01-25

    4-nitroaniline (4-NA) is one of the major priority pollutants generated from industrial productions and pesticide transformation; however very limited biodegradation details have been reported. This work is the first to report 4-NA biodegradation kinetics and toxicity reduction using a newly isolated plant-growth promoting bacterium, Acinetobacter sp. AVLB2. The 4-NA-dependent growth kinetics parameters: μmax, Ks and Ki, were determined to be 0.039 h(-1), 6.623 mg L(-1) and 25.57 mg L(-1), respectively using Haldane inhibition model, while the maximum biodegradation rate (Vmax) of 4-NA was at 0.541 mg L(-1) h(-1) and 0.551 mg L(-1) h(-1), following Michaelis-Menten and Hanes-Woolf models, respectively. Biodegradation pathway of 4-NA by Acinetobacter sp. AVLB2 was proposed, and successfully led to the reduction of 4-NA toxicity according to the following toxicity assessments: microbial toxicity using Escherichia coli DH5α, phytotoxicity with Vigna radiata and Crotalaria juncea, and cytogenotoxicity with Allium cepa root-tip cells. In addition, Acinetobacter sp. AVLB2 possess important plant-growth promoting traits, both in the presence and absence of 4-NA. This study has provided a new insight into 4-NA biodegradation ability and concurrent plant-growth promoting activities of Acinetobacter sp. AVLB2, which may indicate its potential role for rhizoremediation, while sustaining crop production even under 4-NA stressed environment.

  14. Preliminary study of biodegradation of AZ31B magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    REN Yibin; HUANG Jingjing; ZHANG Bingchun; YANG Ke

    2007-01-01

    Magnesium alloys are potential to be developed as a new type of biodegradable implant material by use of their active corrosion behavior.Both in vitro and in vivo biodegradation properties of an AZ31B magnesium alloy were investigated in this work.The results showed that AZ31B alloy has a proper degradation rate and much lower hydrogen release in Hank's solution,with a degradation rate of about 0.3 mm/year and hydrogen release below 0.15mL/cm2.The animal implantation test showed that the AZ31B alloy could slowly biodegrade in femur of the rabbit and form calcium phosphate around the alloy sample,with the Ca/P ratio close to the natural bone.

  15. Anaerobic biodegradation of spent sulphite liquor in a UASB reactor

    DEFF Research Database (Denmark)

    Jantsch, T.G.; Angelidaki, Irini; Schmidt, Jens Ejbye

    2002-01-01

    Anaerobic biodegradation of fermented spent sulphite liquor, SSL, which is produced during the manufacture of sulphite pulp, was investigated. SSL contains a high concentration of lignin products in addition to hemicellulose and has a very high COD load (173 g COD l1). Batch experiments with dilu......Anaerobic biodegradation of fermented spent sulphite liquor, SSL, which is produced during the manufacture of sulphite pulp, was investigated. SSL contains a high concentration of lignin products in addition to hemicellulose and has a very high COD load (173 g COD l1). Batch experiments...... such as incineration. Although the total COD reduction achieved is limited, bioenergy is produced and readily biodegradable matter is removed causing less load on post-treatment installations. 2002 Elsevier Science Ltd. All rights reserved....

  16. Biodegradation Rates of Aromatic Contaminants in Biofilm Reactors

    DEFF Research Database (Denmark)

    Arcangeli, Jean-Pierre; Arvin, Erik

    1995-01-01

    This study has shown that microorganisms can adapt to degrade mixtures of aromatic pollutants at relatively high rates in the μg/l concentration range. The biodegradation rates of the following compounds were investigated in biofilm systems: aromatic hydrocarbons, phenol, methylphenols, chlorophe......This study has shown that microorganisms can adapt to degrade mixtures of aromatic pollutants at relatively high rates in the μg/l concentration range. The biodegradation rates of the following compounds were investigated in biofilm systems: aromatic hydrocarbons, phenol, methylphenols......-reducing conditions, toluene was easily biodegraded. The xylenes and ethylbenzene were degraded cometabolically if toluene was used as a primary carbon source; their removal was influenced by competitive inhibition with toluene. These interaction phenomena are discussed in this paper and a kinetic model taking...

  17. QSBR Study on the Anaerobic Biodegradation of Chlorophenols

    Institute of Scientific and Technical Information of China (English)

    YANG Da-Sen; DAI You-Zhi; LI Jian-Hua; ZHU Fei

    2006-01-01

    18 Physicochemical and quantum chemical parameters of 12 kinds of chlorophenols are calculated in this paper. QSBR (quantitative structure-biodegradability relationship) study is performed using simca statistical software by PLS regression analysis method on anaerobic biodegradation data (logKb), and the QSBR model is developed with favorable prediction. The model shows that the size and energy of the molecule are the dominant factors affecting the anaerobic biodegradation of chlorophenols. And the degradation rate constants (logKb) increase with the increase of core-core repulsion (CCR), average molecular polarizability (α), total surface area (TSA), heat of formation (HOF) and total energy (TE), while decrease with the increase of molecular connectivity index (1XV), relative molecular mass (Mw) and electronic energy (EE).

  18. Biodegradable Detergents from Azadirachta Indica (neem Seed Oil

    Directory of Open Access Journals (Sweden)

    Alewo Opuada AMEH

    2010-12-01

    Full Text Available The production of biodegradable detergent from Azadirachta Indica (neem seed oil was studied in this work. The synthesized detergent was characterised and compared with commercially available detergents. 33g of biodegradable detergent was produced from 30ml of the oil. In the foamability test, the height of liquid and foam of detergent rose to 3cm in a 250ml beaker thus indicating its effectiveness since it compared favourably with the foam heights of commercial detergents. The surface tension of solution of 5g of the synthesized detergent in 100ml of water determined to be 0.00523 N/m was found to be better that of the commercial detergent of same concentration. The oxygen demand for a solution of the synthesized detergents over a five day period found to be 0.4ppm indicated it was biodegradable.

  19. Modeling cutinase enzyme regulation in polyethylene terepthalate plastic biodegradation

    Science.gov (United States)

    Apri, M.; Silmi, M.; Heryanto, T. E.; Moeis, M. R.

    2016-04-01

    PET (Polyethylene terephthalate) is a plastic material that is commonly used in our daily life. The high production of PET and others plastics that can be up to three hundred million tons per year, is not matched by its degradation rate and hence leads to environmental pollution. To overcome this problem, we develop a biodegradation system. This system utilizes LC Cutinase enzyme produced by engineered escherichia coli bacteria to degrade PET. To make the system works efficaciously, it is important to understand the mechanism underlying its enzyme regulation. Therefore, we construct a mathematical model to describe the regulation of LC Cutinase production. The stability of the model is analyzed. We show that the designated biodegradation system can give an oscillatory behavior that is very important to control the amount of inclusion body (the miss-folded proteins that reduce the efficiency of the biodegradation system).

  20. Biodegradation-tunable mesoporous silica nanorods for controlled drug delivery.

    Science.gov (United States)

    Park, Sung Bum; Joo, Young-Ho; Kim, Hyunryung; Ryu, WonHyoung; Park, Yong-il

    2015-05-01

    Mesoporous silica in the forms of micro- or nanoparticles showed great potentials in the field of controlled drug delivery. However, for precision control of drug release from mesoporous silica-based delivery systems, it is critical to control the rate of biodegradation. Thus, in this study, we demonstrate a simple and robust method to fabricate "biodegradation-tunable" mesoporous silica nanorods based on capillary wetting of anodic aluminum oxide (AAO) template with an aqueous alkoxide precursor solution. The porosity and nanostructure of silica nanorods were conveniently controlled by adjusting the water/alkoxide molar ratio of precursor solutions, heat-treatment temperature, and Na addition. The porosity and biodegradation kinetics of the fabricated mesoporous nanorods were analyzed using N2 adsorption/desorption isotherm, TGA, DTA, and XRD. Finally, the performance of the mesoporous silica nanorods as drug delivery carrier was demonstrated with initial burst and subsequent "zero-order" release of anti-cancer drug, doxorubicin.

  1. DEVELOPMENT OF ACTIVE AND BIODEGRADABLES CONTAINERS FOR AGRICULTURAL CROPS

    Directory of Open Access Journals (Sweden)

    Franco Poggio

    2016-06-01

    Full Text Available In this paper, the development of biodegradable containers for crops that could be transplanted directly and act as fertilizers is proposed. Bovine gelatin was chosen as the base material, which was processed in a mini-injector mixer with a concentrated urea solution acted as a plasticizer. Rheological and tensile tests were performed in order to evaluate the injection of gelatin based formulations and mechanical properties related to the proposed application. Taking into account that biodegradable materials have a low water resistance, the increment of container stability was proposed using a surface coating. In addition, the influence of moisture content, the soluble matter and swelling were studied and analyzed. It was observed that coated samples were significantly more stable than the control ones, which guarantees the feasibility of the selected system and its potential development of biodegradable containers.

  2. The biodegradation of crude oil in the deep ocean.

    Science.gov (United States)

    Prince, Roger C; Nash, Gordon W; Hill, Stephen J

    2016-10-15

    Oil biodegradation at a simulated depth of 1500m was studied in a high-pressure apparatus at 5°C, using natural seawater with its indigenous microbes, and 3ppm of an oil with dispersant added at a dispersant:oil ratio of 1:15. Biodegradation of the detectable hydrocarbons was prompt and extensive (>70% in 35days), although slower by about a third than under otherwise identical conditions equivalent to the surface. The apparent half-life of biodegradation of the total detectable hydrocarbons at 15MPa was 16days (compared to 13days at atmospheric pressure), although some compounds, such as the four-ring aromatic chrysene, were degraded rather more slowly.

  3. Molecular Design of Synthetic Biodegradable Polymers as Cell Scaffold Materials

    Institute of Scientific and Technical Information of China (English)

    WANG Shen-guo; WAN Yu-qing; CAI Qing; HE Bin; CHEN Wen-na

    2004-01-01

    Poly(lactic acid) and its copolymers are regarded as the most useful biomaterials. The good biocompatibility, biodegradability and mechanical properties of them make the synthetic biodegradable polymers have primary application to tissue engineering. The advantages and disadvantages of the synthetic biodegradable polymers as cell scaffold materials are evaluated. This article reviews the modification of polylactide-family aliphatic polymers to improve the cell affinity when the polymers are used as cell scaffolds. We have developed four main approaches: to modify polyester cell scaffolds in combination of plasma treating and collagen coating; to introduce hydrophilic segments into aliphatic polyester backbones; to introduce pendant functional groups into polyester chains; to modify polyester with dextran. The results of the cell cultures prove that the approaches mentioned above have improved the cell affinity of the polyesters and have modulated cell function such as adhesion, proliferation and migration.

  4. Naphthalene biodegradation in temperate and arctic marine microcosms.

    Science.gov (United States)

    Bagi, Andrea; Pampanin, Daniela M; Lanzén, Anders; Bilstad, Torleiv; Kommedal, Roald

    2014-02-01

    Naphthalene, the smallest polycyclic aromatic hydrocarbon (PAH), is found in abundance in crude oil, its major source in marine environments. PAH removal occurs via biodegradation, a key process determining their fate in the sea. Adequate estimation of PAH biodegradation rates is essential for environmental risk assessment and response planning using numerical models such as the oil spill contingency and response (OSCAR) model. Using naphthalene as a model compound, biodegradation rate, temperature response and bacterial community composition of seawaters from two climatically different areas (North Sea and Arctic Ocean) were studied and compared. Naphthalene degradation was followed by measuring oxygen consumption in closed bottles using the OxiTop(®) system. Microbial communities of untreated and naphthalene exposed samples were analysed by polymerase chain reaction denaturing gradient gel electrophoresis (PCR-DGGE) and pyrosequencing. Three times higher naphthalene degradation rate coefficients were observed in arctic seawater samples compared to temperate, at all incubation temperatures. Rate coefficients at in situ temperatures were however, similar (0.048 day(-1) for temperate and 0.068 day(-1) for arctic). Naphthalene biodegradation rates decreased with similar Q10 ratios (3.3 and 3.5) in both seawaters. Using the temperature compensation method implemented in the OSCAR model, Q10 = 2, biodegradation in arctic seawater was underestimated when calculated from the measured temperate k1 value, showing that temperature difference alone could not predict biodegradation rates adequately. Temperate and arctic untreated seawater communities were different as revealed by pyrosequencing. Geographic origin of seawater affected the community composition of exposed samples.

  5. DEVELOPMENT OF BIOPLUME 4 MODEL FOR FUELS AND CHLORINATED SOLVENT BIODEGRADATION

    Science.gov (United States)

    The Bioplume model has been in development and use for modeling biodegradation and natural attenuation since the late 1980s. Bioplume 1 focused on aerobic biodegradation of BTEX. Bioplume II simulated oxygen and hydrocarbons and simulated biodegradation using an instantaneous r...

  6. Effects of Biodegradation on the Distribution of Alkylcarbazoles in Crude Oils

    Institute of Scientific and Technical Information of China (English)

    ZHANG CHUNMING(张春明); MEI BOWEN(梅博文); STEVE R.LARTER; MARTIN P.KOOPMANS; XIAO QIANHUA(肖乾华)

    2002-01-01

    We have investigated the distributions of alkylcarbazoles in a series of crude oils with different biodegradation extents, in combination with biomarker parameters, stable carbon isotopic ratios and viscosities. The analyses showed that slight biodegradation has little effect on alkylcarbazoles. The concentrations of C0-, C1-, and C2-carbazoles seem to display a slight decrease with biodegradation through the moderately biodegraded stage, and an abrupt decrease to the heavily biodegraded stage. The relative concentrations of C0-, C1-, and C2-carbazoles do not show any apparent change in the non-heavily biodegraded stages, but through non-heavily biodegraded to heavily biodegraded stages, the percentages of C0- and C1-carbazoles decrease,and those of C2-carbazoles increase significantly, which may indicate that C2-carbazoles are more resistant to biodegradation than lower homologous species. As to C2-carbazole isomers,the relative concentrations of the pyrrolic N-H-shielded, pyrrolic N-H partially shielded and pyrrolic N-H-exposed isomers do not show any obvious variation in the non-heavily biodegraded oil, but there is an abrupt change through the mid-biodegraded stage to the heavily biodegraded stage.

  7. Acquisition of the Concept "Biodegradable" Through Written Instruction: Pretest and Age Effects.

    Science.gov (United States)

    Arganian, Mourad P.; And Others

    The primary purpose of this study/experiment was to determine whether children in the middle elementary grades would be able to learn the concepts "biodegradable agent,""biodegradable material," and "biodegradable process" from a short written lesson. Secondary purposes were to examine the degree to which a pretest, grade level, and sex of the…

  8. FRET Imaging Trackable Long-Circulating Biodegradable Nanomedicines for Ovarian Cancer Therapy

    Science.gov (United States)

    2014-09-01

    Award Number: W81XWH-13-1-0160 TITLE: FRET Imaging Trackable Long-Circulating Biodegradable ...TITLE AND SUBTITLE FRET Imaging Trackable Long-Circulating Biodegradable Nanomedicines for Ovarian Cancer Therapy 5a. CONTRACT NUMBER...strategy, which permits visualizing the biodegradation of copolymer-drug conjugates at the body, tissue and cell levels in real time. The information

  9. Biodegradation Mechanism and Technology of Polycyclic Aromatic Hydrocarbons

    Institute of Scientific and Technical Information of China (English)

    DIAO Shuo; WANG Hong-qi; ZHENG Yi-nan; HUA Fei

    2016-01-01

    [Abstract]Polycyclic aromatic hydrocarbons are a class of potentially hazardous chemicals of environmental and health concern.PAHs are one of the most prevalent groups of contaminants found in soil.Biodegradation of complex hydrocarbon usually requires the cooperation of more than single specie.This paper reviews the existing screening methods of PAH-degrading bacteria.It studied the mechanism and technical applications of the co-metabolism in PAHs.Author gives the suggestions and prospects in Biodegradable trend of PHAs.

  10. Biodegradation and dissolution of polyaromatic hydrocarbons by Stenotrophomonas sp.

    Science.gov (United States)

    Tiwari, Bhagyashree; Manickam, N; Kumari, Smita; Tiwari, Akhilesh

    2016-09-01

    The aim of this work was to study the biodegradation capabilities of a locally isolated bacterium, Stenotrophomonas sp. strain IITR87 to degrade the polycyclic aromatic hydrocarbons and also check the preferential biodegradation of polycyclic aromatic hydrocarbons (PAHs). From preferential substrate degradation studies, it was found that Stenotrophomonas sp. strain IITR87 first utilized phenanthrene (three membered ring), followed by pyrene (four membered ring), then benzo[α]pyrene (five membered ring). Dissolution study of PAHs with surfactants, rhamnolipid and tritonX-100 showed that the dissolution of PAHs increased in the presence of surfactants.

  11. Formaldehyde removal from air by a biodegradation system.

    Science.gov (United States)

    Xu, Zhongjun; Hou, Haiping

    2010-07-01

    A biodegradation system was used for the treatment of formaldehyde-polluted air. Air pressure dropped 12 mm water in the trickling biofilter during the experiment of about 4 months. In the range 20-300 mg m(-3) influent formaldehyde, this biodegradation system obtained 4.0-40.0 mg h(-1) degradation capacity, with 100%-66.7% degradation efficiency. The amount of formaldehyde degraded by the trickling biofilter was more than that by the activated sludge bioreactor below 200 mg m(-3) influent gaseous formaldehyde while the amount by the trickling biofilter was less than that by the activated sludge bioreactor over 200 mg m(-3) influent gaseous formaldehyde.

  12. Biodegradation in oils as a geological natural analogue

    Energy Technology Data Exchange (ETDEWEB)

    Rojas, G. [Comision Nacional de Energia Atomica (Argentina)]. E-mail: rojasg@ciudad.com.ar; Julio Salvarredi, J. [Comision Nacional de Energia Atomica (Argentina)]. E-mail: salvarredi@ciudad.com.ar

    2004-07-01

    A synthesis of scientific knowledge about petroleum biodegradation linked to uranium mineralisation is firstly done. Then the genesis of Huemul Uranium ore deposit (Malargue Town, Mendoza Province) is discussed, where Uranium ore is linked only with one type of asphaltite (there are three other types) from an oil field close by. This asphaltite type would be an efficient natural geological barrier for Uranium migration and it could be linked to a particular kind of biodegradation. The authors think that the International Wonuc Conference would be a good opportunity to discuss a way for future investigations. (author)

  13. Biodegraded and Polyurethane Drape-formed Urea Fertilizer

    Institute of Scientific and Technical Information of China (English)

    WANG Yong; LI Jian; CHEN Xiaoyao

    2005-01-01

    Natural water absorbent konjac flour participates in synthesizing biodegraded and polyurethane foamed drape, which is used to release urea slowly.The experimental results indicate that the slowly-releasing velocity of urea nitrogen and the degrading velocity of the drape can be controlled by regulating the thicknesses of drapes, the amount of konjac flour and the water content. In addition, the biodegradability of the drape was investigated by burying the specimens in earth afterwards,and results show this drape can be degraded naturally.

  14. Biodegradation of mixture of VOC's in a biofilter

    Institute of Scientific and Technical Information of China (English)

    D. Arulneyam; T. Swaminathan

    2004-01-01

    Volatile organic compounds(VOC' s) in air have become major concem in recent years. Biodegradation of a mixture of ethanol and methanol vapor was evaluated in a laboratory biofilter with a bed of compost and polystyrene particles using an acclimated mixed culture. The continuous performance of the biofilter was studied with different proportion of ethanol and methanol at different initial concentration and flow rates. The result showed significant removal for both ethanol and methanol, which were composition dependent.The presence of either compound in the mixture inhibited the biodegradation of the other.

  15. Development of Biodegradable Nanosheets as Nano-adhesive Plasters

    Institute of Scientific and Technical Information of China (English)

    Shinji; Takeoka; Yosuke; Okamura; Toshinori; Fujie; Yoshihito; Fukui

    2007-01-01

    1 Results A nano-adhesive plaster is a biodegradable polymeric sheet with nanometer thickness; e.g.,one side is adhesive to a wound and the other side has high surface compatibility as biomaterial application.We proposed three kinds of polymeric nanosheets; the first is a sheet with ca.5 nm thickness made by cross-linking of human serum albumin (HSA) absorbed on a patterned octadecyltrimethoxysilane monolayer,the second is a nanosheet with ca.100 nm thickness prepared by thermal fusion of biodegradable P...

  16. Effects of Biodegradation on Crude Oils from Karamay Oilfield

    Institute of Scientific and Technical Information of China (English)

    杨斌; 杨坚强; 等

    1989-01-01

    Studies of biological marker compou nds in five oil samples from a profile wherenormal crude oil,low condensate oil and heavy oil are produced in the Karamay Oilfield have been carried out with great empha-sis on the biodegradation-resisting capability of 13,17 secosteranes,8,14 secohopanes,gammacerane and carotenes.Based on these studies,a sequence of biodegradation-resisting intensities has been established for saturated hydrocarbon biomarkers in crude oils from the Karamay Oilfield.

  17. Soil Quality and Colloid Transport under Biodegradable Mulches

    Science.gov (United States)

    Sintim, Henry; Bandopadhyay, Sreejata; Ghimire, Shuresh; Flury, Markus; Bary, Andy; Schaeffer, Sean; DeBruyn, Jennifer; Miles, Carol; Inglis, Debra

    2016-04-01

    Polyethylene (PE) mulch is commonly used in agriculture to increase water use efficiency, to control weeds, manage plant diseases, and maintain a favorable micro-climate for plant growth. However, producers need to retrieve and safely dispose PE mulch after usage, which creates enormous amounts of plastic waste. Substituting PE mulch with biodegradable plastic mulches could alleviate disposal needs. However, repeated applications of biodegradable mulches, which are incorporated into the soil after the growing season, may cause deterioration of soil quality through breakdown of mulches into colloidal fragments, which can be transported through soil. Findings from year 1 of a 5-year field experiment will be presented.

  18. Biodegradation of alkylates under less agitated aquifer conditions

    Institute of Scientific and Technical Information of China (English)

    Jay J.Cho; Makram T.Suidan; Albert D.Venosa

    2013-01-01

    The biodegradability of three alkylates (2,3-dimethylpentane,2,4-dimethylpentane and 2,2,4-trimethylpentane) under less agitated aquifer conditions was investigated in this study.All three alkylates biodegraded completely under these conditions regardless of the presence or absence of ethanol or benzene,toluene,ethylbenzene,and xylenes (BTEX) in the feed.In the presence of ethanol,alkylates degradation was not inhibited by ethanol.However,alkylates degraded more slowly in the presence of BTEX suggesting competitive inhibition to microbial utilization of alkylates.In the sterile controls,alkylates concentrations remained unchanged throughout the experiments.

  19. Primary biodegradation of linear alkyltoluene and alkylbenzene sulfonates.

    Science.gov (United States)

    Singh, M; Satish, S

    1989-01-01

    Studies on the primary biodegradation of linear dodecylbenzene sulfonate, linear dodecyltoluene sulfonate, linear C(10-14) benzene sulfonate, linear C(10-14) toluene sulfonate, commercial samples of linear C(10-14) benzene sulfonate and branched dodecylbenzene sulfonate (DDBS) were carried out using a microbial culture developed from garden soil. Results show that linear alkyl toluene (LAT) is as degradable as linear alkylbenzene (LAB) in 7 days. However, a slower rate of degradation was noted with LAT. Various distributions of the positional isomers of the phenyl ring in the alkane chain of C(10-14) LAB showed no change in the pattern of primary biodegradation.

  20. Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases

    Science.gov (United States)

    Cha, Pil-Ryung; Han, Hyung-Seop; Yang, Gui-Fu; Kim, Yu-Chan; Hong, Ki-Ha; Lee, Seung-Cheol; Jung, Jae-Young; Ahn, Jae-Pyeong; Kim, Young-Yul; Cho, Sung-Youn; Byun, Ji Young; Lee, Kang-Sik; Yang, Seok-Jo; Seok, Hyun-Kwang

    2013-08-01

    Crystalline Mg-based alloys with a distinct reduction in hydrogen evolution were prepared through both electrochemical and microstructural engineering of the constituent phases. The addition of Zn to Mg-Ca alloy modified the corrosion potentials of two constituent phases (Mg + Mg2Ca), which prevented the formation of a galvanic circuit and achieved a comparable corrosion rate to high purity Mg. Furthermore, effective grain refinement induced by the extrusion allowed the achievement of much lower corrosion rate than high purity Mg. Animal studies confirmed the large reduction in hydrogen evolution and revealed good tissue compatibility with increased bone deposition around the newly developed Mg alloy implants. Thus, high strength Mg-Ca-Zn alloys with medically acceptable corrosion rate were developed and showed great potential for use in a new generation of biodegradable implants.

  1. Biodegradation of concrete intended for their decontamination; Biodegradation de matrices cimentaires en vue de leur decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Jestin, A

    2005-05-15

    The decontamination of sub-structural materials represents a stake of high importance because of the high volume generated. It is agreed then to propose efficient and effective processes. The process of bio-decontamination of the hydraulic binders leans on the mechanisms of biodegradation of concretes, phenomenon characterized in the 40's by an indirect attack of the material by acids stem from the microbial metabolism: sulphuric acid (produced by Thiobacillus), nitric acid (produced by Nitrosomonas and Nitrobacter) and organic acids (produced by fungi). The principle of the bio-decontamination process is to apply those microorganisms on the surface of the contaminated material, in order to damage its surface and to retrieve the radionuclides. One of the multiple approaches of the process is the use of a bio-gel that makes possible the micro-organisms application. (author)

  2. Biodegradable mesoporous delivery system for biomineralization precursors

    Directory of Open Access Journals (Sweden)

    Yang HY

    2017-01-01

    Full Text Available Hong-ye Yang,1 Li-na Niu,2 Jin-long Sun,2 Xue-qing Huang,3 Dan-dan Pei,4 Cui Huang,1 Franklin R Tay5 1The State Key Laboratory Breeding Base of Basic Science of Stomatology, Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, Hubei, People’s Republic of China; 2State Key Laboratory of Military Stomatology, National Clinical Research Center for Oral Diseases, Shaanxi Key Laboratory of Oral Diseases, Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University, Xi’an, Shaanxi, People’s Republic of China; 3Department of Prosthodontics, Guanghua School and Hospital of Stomatology, Guangdong Key Laboratory of Stomatology, Yat-sen University, Guangzhou, Guangdong, People’s Republic of China; 4Department of Prosthodontics, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, People’s Republic of China; 5Department of Endodontics, College of Dental Medicine, Augusta University, Augusta, GA, USA Abstract: Scaffold supplements such as nanoparticles, components of the extracellular matrix, or growth factors have been incorporated in conventional scaffold materials to produce smart scaffolds for tissue engineering of damaged hard tissues. Due to increasing concerns on the clinical side effects of using large doses of recombinant bone-morphogenetic protein-2 in bone surgery, it is desirable to develop an alternative nanoscale scaffold supplement that is not only osteoinductive, but is also multifunctional in that it can perform other significant bone regenerative roles apart from stimulation of osteogenic differentiation. Because both amorphous calcium phosphate (ACP and silica are osteoinductive, a biodegradable, nonfunctionalized, expanded-pore mesoporous silica nanoparticle carrier was developed for loading, storage, and sustained release of a novel, biosilicification-inspired, polyamine-stabilized liquid precursor phase of ACP

  3. Mechanical characterization of commercial biodegradable plastic films

    Science.gov (United States)

    Vanstrom, Joseph R.

    Polylactic acid (PLA) is a biodegradable plastic that is relatively new compared to other plastics in use throughout industry. The material is produced by the polymerization of lactic acid which is produced by the fermentation of starches derived from renewable feedstocks such as corn. Polylactic acid can be manufactured to fit a wide variety of applications. This study details the mechanical and morphological properties of selected commercially available PLA film products. Testing was conducted at Iowa State University and in conjunction with the United States Department of Agriculture (USDA) BioPreferred ProgramRTM. Results acquired by Iowa State were compared to a similar study performed by the Cortec Corporation in 2006. The PLA films tested at Iowa State were acquired in 2009 and 2010. In addition to these two studies at ISU, the films that were acquired in 2009 were aged for a year in a controlled environment and then re-tested to determine effects of time (ageing) on the mechanical properties. All films displayed anisotropic properties which were confirmed by inspection of the films with polarized light. The mechanical testing of the films followed American Society for Testing and Materials (ASTM) standards. Mechanical characteristics included: tensile strength (ASTM D882), elongation of material at failure (ASTM D882), impact resistance (ASTM D1922), and tear resistance (ASTM D4272). The observed values amongst all the films ranged as followed: tensile strength 33.65--8.54 MPa; elongation at failure 1,665.1%--47.2%; tear resistance 3.61--0.46 N; and puncture resistance 2.22--0.28 J. There were significant differences between the observed data for a number of films and the reported data published by the Cortec Corp. In addition, there were significant differences between the newly acquired material from 2009 and 2010, as well as the newly acquired materials in 2009 and the aged 2009 materials, suggesting that ageing and manufacturing date had an effect on

  4. The development and performance testing of a biodegradable scale inhibitor

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, Julie; Fidoe, Steve; Jones, Chris

    2006-03-15

    The oil industry is currently facing severe restrictions concerning the discharge of oil field chemicals into the environment. Many commonly used materials in both topside and downhole applications are phased for substitution for use in the North Sea, and more will be identified. The development of biodegradable and low toxicity chemicals, which afford equal or improved efficacy, compared to conventional technology, available at a competitive price, is a current industry challenge. A range of biodegradable materials are increasingly available, however their limited performance can result in a restricted range of applications. This paper discusses the development and commercialization of a readily biodegradable scale inhibitor, ideal for use in topside applications. This material offers a broad spectrum of activity, notably efficiency against barium sulphate, calcium sulphate and calcium carbonate scales, in a range of water chemistries. A range of performance testing, compatibility, stability and OCNS dataset will be presented. Comparisons with commonly used chemicals have been made to identify the superior performance of this phosphate ester. This paper will discuss a scale inhibitor suitable for use in a variety of conditions which offers enhanced performance combined with a favourable biodegradation profile. This material is of great benefit to the industry, particularly in North Sea applications. (author) (tk)

  5. Isomer-specific biodegradation of methylphenanthrenes by soil bacteria.

    Science.gov (United States)

    Lamberts, Rasmus F; Christensen, Jan H; Mayer, Philipp; Andersen, Ole; Johnsen, Anders R

    2008-07-01

    It is assumed that bacteria generally degrade 2-methylphenanthrene (2MPhe) in preference to 1-methylphenanthrene (1MPhe), and that environmental biodegradation of methylated PAHs therefore can be described qualitatively by changes in relative concentrations of these isomers. Our objective was to investigate whether microbial phenanthrene degraders (Sphingomonas and Mycobacterium) show such isomer-specific PAH degradation. Eleven out of twenty-nine phenanthrene degraders could grow on methylphenanthrene. The mycobacteria grew only on 2MPhe, the sphingomonads grew mostly on 1MPhe, and one sphingomonad could utilize both substrates. Seven strains were tested in a two-phase system where 1MPhe and 2MPhe were supplied in heptamethylnonane. For these strains, a consistent description of biodegradation based on the 2MPhe/1MPhe diagnostic ratio would not be possible because three Mycobacterium and one Sphingomonas degraded 2MPhe faster than 1MPhe, another Sphingomonas degraded 1MPhe and 2MPhe at almost equal rates, and two Sphingomonas degraded 1MPhe faster than 2MPhe. Thus, environmental biodegradation of phenanthrenes may theoretically proceed with only minor changes in 2MPhe/1MPhe ratios if individual members of the degrader community have different isomer preferences. However, two soil microcosms polluted with bunker oil confirmed the general decline in 2MPhe/1MPhe ratio during oil biodegradation.

  6. Biodegradation of JP-5 Aviation Fuel by Subsurface Microbial Communities.

    Science.gov (United States)

    1988-01-01

    compounds (13), and in the process the microorganisms acquire energy and materials for growth. During aerobic biodegradation, the carbon source is...nan. potentlal JP-5 degraders as mossize Z m :ne stuc’. sites. a - eolica platino orocecure .5 was .Asec. cu*,rs oates wnic" Mao beteeer -., arc well

  7. A biodegradable and biocompatible gecko-inspired tissue adhesive.

    Science.gov (United States)

    Mahdavi, Alborz; Ferreira, Lino; Sundback, Cathryn; Nichol, Jason W; Chan, Edwin P; Carter, David J D; Bettinger, Chris J; Patanavanich, Siamrut; Chignozha, Loice; Ben-Joseph, Eli; Galakatos, Alex; Pryor, Howard; Pomerantseva, Irina; Masiakos, Peter T; Faquin, William; Zumbuehl, Andreas; Hong, Seungpyo; Borenstein, Jeffrey; Vacanti, Joseph; Langer, Robert; Karp, Jeffrey M

    2008-02-19

    There is a significant medical need for tough biodegradable polymer adhesives that can adapt to or recover from various mechanical deformations while remaining strongly attached to the underlying tissue. We approached this problem by using a polymer poly(glycerol-co-sebacate acrylate) and modifying the surface to mimic the nanotopography of gecko feet, which allows attachment to vertical surfaces. Translation of existing gecko-inspired adhesives for medical applications is complex, as multiple parameters must be optimized, including: biocompatibility, biodegradation, strong adhesive tissue bonding, as well as compliance and conformability to tissue surfaces. Ideally these adhesives would also have the ability to deliver drugs or growth factors to promote healing. As a first demonstration, we have created a gecko-inspired tissue adhesive from a biocompatible and biodegradable elastomer combined with a thin tissue-reactive biocompatible surface coating. Tissue adhesion was optimized by varying dimensions of the nanoscale pillars, including the ratio of tip diameter to pitch and the ratio of tip diameter to base diameter. Coating these nanomolded pillars of biodegradable elastomers with a thin layer of oxidized dextran significantly increased the interfacial adhesion strength on porcine intestine tissue in vitro and in the rat abdominal subfascial in vivo environment. This gecko-inspired medical adhesive may have potential applications for sealing wounds and for replacement or augmentation of sutures or staples.

  8. [Anaerobic biodegradation of phthalic acid esters (Paes) in municipal sludge].

    Science.gov (United States)

    Liang, Zhi-Feng; Zhou, Wen; Lin, Qing-Qi; Yang, Xiu-Hong; Wang, Shi-Zhong; Cai, Xin-De; Qiu, Rong-Liang

    2014-04-01

    Phthalic acid esters (PAEs), a class of organic pollutants with potent endocrine-disrupting properties, are widely present in municipal sludge. Study of PAEs biodegradation under different anaerobic biological treatment processes of sludge is, therefore, essential for a safe use of sludge in agricultural practice. In this study, we selected two major sludge PAEs, i.e. di-n-butyl phthalate (DBP) and di-(2-enthylhexyl) phthalate (DEHP), to investigate their biodegradation behaviors in an anaerobic sludge digestion system and a fermentative hydrogen production system. The possible factors influencing PAEs biodegradation in relation to changes of sludge properties were also discussed. The results showed that the biodegradation of DBP reached 99.6% within 6 days, while that of DEHP was 46.1% during a 14-day incubation period in the anaerobic digestion system. By comparison, only 19.5% of DBP was degraded within 14 days in the fermentative hydrogen production system, while no degradation was detected for DEHP. The strong inhibition of the degradation of both PAEs in the fermentative hydrogen production system was ascribed to the decreases in microbial biomass and ratios of gram-positive bacteria/gram-negative bacteria and fungi/ bacteria, and the increase of concentrations of volatile fatty acids (e. g. acetic acid, propionic acid and butyric acid) during the fermentative hydrogen-producing process.

  9. Influence of saponins on the biodegradation of halogenated phenols.

    Science.gov (United States)

    Kaczorek, Ewa; Smułek, Wojciech; Zdarta, Agata; Sawczuk, Agata; Zgoła-Grześkowiak, Agnieszka

    2016-09-01

    Biotransformation of aromatic compounds is a challenge due to their low aqueous solubility and sorptive losses. The main obstacle in this process is binding of organic pollutants to the microbial cell surface. To overcome these, we applied saponins from plant extract to the microbial culture, to increase pollutants solubility and enhance diffusive massive transfer. This study investigated the efficiency of Quillaja saponaria and Sapindus mukorossi saponins-rich extracts on biodegradation of halogenated phenols by Raoultella planticola WS2 and Pseudomonas sp. OS2, as an effect of cell surface modification of tested strains. Both strains display changes in inner membrane permeability and cell surface hydrophobicity in the presence of saponins during the process of halogenated phenols biotransformation. This allows them to more efficient pollutants removal from the environment. However, only in case of the Pseudomonas sp. OS2 the addition of surfactants to the culture improved effectiveness of bromo-, chloro- and fluorophenols biodegradation. Also introduction of surfactant allowed higher biodegradability of halogenated phenols and can shorten the process. Therefore this suggests that usage of plant saponins can indicate more successful halogenated phenols biodegradation for selected strains.

  10. Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities

    Directory of Open Access Journals (Sweden)

    Maryam Moravej

    2011-06-01

    Full Text Available During the last decade, biodegradable metallic stents have been developed and investigated as alternatives for the currently-used permanent cardiovascular stents. Degradable metallic materials could potentially replace corrosion-resistant metals currently used for stent application as it has been shown that the role of stenting is temporary and limited to a period of 6–12 months after implantation during which arterial remodeling and healing occur. Although corrosion is generally considered as a failure in metallurgy, the corrodibility of certain metals can be an advantage for their application as degradable implants. The candidate materials for such application should have mechanical properties ideally close to those of 316L stainless steel which is the gold standard material for stent application in order to provide mechanical support to diseased arteries. Non-toxicity of the metal itself and its degradation products is another requirement as the material is absorbed by blood and cells. Based on the mentioned requirements, iron-based and magnesium-based alloys have been the investigated candidates for biodegradable stents. This article reviews the recent developments in the design and evaluation of metallic materials for biodegradable stents. It also introduces the new metallurgical processes which could be applied for the production of metallic biodegradable stents and their effect on the properties of the produced metals.

  11. Anaerobic biodegradation of lipids of the marine microalga Nannochloropsis salina

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Grossi, V.; Blokker, P.

    2001-01-01

    In order to determine the susceptibility to anaerobic biodegradation of the different lipid biomarkers present in a marine microalga containing algaenan, portions of one large batch of cultured Nannochloropsis salina (Eustigmatophyceae) were incubated in anoxic sediment slurries for various times. A

  12. Removal and Biodegradation of Nonylphenol by Four Freshwater Microalgae

    Science.gov (United States)

    He, Ning; Sun, Xian; Zhong, Yu; Sun, Kaifeng; Liu, Weijie; Duan, Shunshan

    2016-01-01

    The removal and biodegradation of nonylphenol (NP) by four freshwater microalgae, including three green algae (Scendesmus quadriauda, Chlorella vulgaris, and Ankistrodesmus acicularis) and one cyanobacterium (Chroococcus minutus) were studied in bacteria-free cultures exposed to different concentrations of NP for 5 days. All four algal species showed a rapid and high ability to remove NP (including bioaccumulation and biodegradation). Among these species, A. acicularis (Ankistrodesmus acicularis) had the highest NP removal rate (83.77%) at 120 h when exposed to different NP treatments (0.5–2.5 mg·L−1), followed by C. vulgaris (Chlorella vulgaris) (80.80%), S. quadriauda (Scendesmus quadriauda) (70.96%) and C. minutus (Chroococcus minutus) (64.26%). C. vulgaris had the highest NP biodegradation percentage (68.80%) at 120 h, followed by A. acicularis (65.63%), S. quadriauda (63.10%); and C. minutus (34.91%). The extracellular NP contents were lower than the intracellular NP contents in all tested algae. The ratio of the extracellular NP content and the intracellular NP content ranged from 0.04 to 0.85. Therefore, the removal of NP from the medium was mainly due to the algal degradation. These results indicate that A. acicularis and C. vulgaris are more tolerant to NP and could be used for treatment of NP contaminated aqueous systems effectively by bioremoval and biodegradation. PMID:27983663

  13. Review on Chlorobenzoic Acids Biodegradation and Their Environmental Impacts

    Institute of Scientific and Technical Information of China (English)

    LuWenming; QiYun; ZhaoLin; TanXin

    2005-01-01

    Chlorobenzoic Acids are toxic organic compounds largely distributed in soils and sediments. They can be degraded to various products by microorgans. This paper is a review of the literature on biodegradability of the chlorobenzoic acids. The degradation pathways, degradation genes, role of transposable elements, and construction of strains are discussed. A brief introduction is given on the environmental impacts and the pollution control.

  14. Study on the Synthesis and Biodegradation of Aliphatic Polyester

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An aliphatic polyester, poly(hexalene adipate) (PHA) and an aliphatic copolyester, poly (hexalene adipate succinate) (PHAS) were synthesized by direct condensation of corresponding binary acid and binary alcohol in the presence of a catalyst, p-toluene sulfonic acid. The biodegradation of these polyesters were studied in the laboratory by enzyme attack and outdoor soil burial. The results show that these polyesters have good biodegradability and the copolyester PHAS, even displayed a better biodegradability than the polyester PHA. In the presence of Penicillium chrysogenum the weight loss reached 18.3% for the PHAS (film thickness 1.0 mm)and 9.1% for the PHA (film thickness 1.0 mm) after 28 days. Outdoor soil burial tests indicate that these polyesters also have good biodegradability in natural conditions. The weight loss reached 14.2% for PHAS (film thickness 0.1 mm) and 6.7% for PHA (film thickness 0.1mm) after burying in soil for 36 days.

  15. The use of ecocores to evaluate biodegradation in marine sediments

    DEFF Research Database (Denmark)

    Jensen, Kurt; Albrechtsen, Hans-Jørgen; Nielsen, Jef

    1988-01-01

    A laboratory sediment microcosm called the ecocore is described. It has been used to test the biodegradability of substances which predominantly enter the sediment. A new method for introducing hydrophobic test substances such as hydrocarbons to the test system is also described. In a series...

  16. Biodegradation of diesel/biodiesel blends in saturated sand microcosms

    DEFF Research Database (Denmark)

    Lisiecki, Piotr; Chrzanowski, Łukasz; Szulc, Alicja

    2014-01-01

    The aim of the study was to evaluate the biodegradation extent of both aromatic and aliphatic hydrocarbon fractions in saturated sandy microcosm spiked with diesel/biodiesel blends (D, B10, B20, B30, B40, B50, B60, B70, B80, B90 and B100, where D is commercial petroleum diesel fuel and B is comme......The aim of the study was to evaluate the biodegradation extent of both aromatic and aliphatic hydrocarbon fractions in saturated sandy microcosm spiked with diesel/biodiesel blends (D, B10, B20, B30, B40, B50, B60, B70, B80, B90 and B100, where D is commercial petroleum diesel fuel and B...... is commercial biodiesel blend) augmented with a bacterial consortium of petroleum degraders. The biodegradation kinetics for blends were evaluated based on measuring the amount of emitted CO2 after 578 days. Subsequently, the residual aromatic and aliphatic fractions were separated and determined by employing...... GC-FID and GC _ GC–TOF-MS. Additionally, the influence of biodiesel-amendment on the community dynamics was assessed based on the results of real-time PCR analyzes. Our results suggest that the biodegradation extents of both aliphatic and aromatic hydrocarbon were uninfluenced by the addition...

  17. Bio-Based Polymers with Potential for Biodegradability

    Directory of Open Access Journals (Sweden)

    Thomas F. Garrison

    2016-07-01

    Full Text Available A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid (PLA, widely used in multiple commercial applications nowadays. There is an intrinsic expectation that bio-based polymers are also biodegradable, but in reality there is no guarantee that polymers prepared from biorenewable feedstock exhibit significant or relevant biodegradability. Biodegradability studies are therefore crucial in order to assess the long-term environmental impact of such materials. This review presents a brief overview of the different classes of bio-based polymers, with a strong focus on vegetable oil-derived resins and PLA. An entire section is dedicated to a discussion of the literature addressing the biodegradability of bio-based polymers.

  18. Challenges and opportunities of biodegradable plastics: A mini review.

    Science.gov (United States)

    Rujnić-Sokele, Maja; Pilipović, Ana

    2017-02-01

    The concept of materials coming from nature with environmental advantages of being biodegradable and/or biobased (often referred to as bioplastics) is very attractive to the industry and to the consumers. Bioplastics already play an important role in the fields of packaging, agriculture, gastronomy, consumer electronics and automotive, but still they have a very low share in the total production of plastics (currently about 1% of the about 300 million tonnes of plastic produced annually). Biodegradable plastics are often perceived as the possible solution for the waste problem, but biodegradability is just an additional feature of the material to be exploited at the end of its life in specific terms, in the specific disposal environment and in a specific time, which is often forgotten. They should be used as a favoured choice for the applications that demand a cheap way to dispose of the item after it has fulfilled its job (e.g. for food packaging, agriculture or medical products). The mini-review presents the opportunities and future challenges of biodegradable plastics, regarding processing, properties and waste management options.

  19. Application of a Biodegradable Lubricant in a Diesel Vehicle

    DEFF Research Database (Denmark)

    Schramm, Jesper

    2003-01-01

    The IEA Advanced Motor Fuels Agreement has initiated this project concerning the application of biodegradable lubricants to diesel and gasoline type vehicles. Emission measurements on a chassis dynamometer were carried out. The purpose of these measurements was to compare the emissions of CO, CO2...

  20. Biodegradable versus tutanium plates and screws in maxillofacial surgery

    NARCIS (Netherlands)

    van Bakelen, Nicolaas

    2014-01-01

    Nowadays, titanium is regarded as the ‘golden standard’ for fixation of bone segments. It appears to be necessary that titanium is removed following bone healing in a second operation in 5-40% of the cases. Biodegradable fixation systems have been developed to dissolve gradually in the human body in

  1. COMPARISON OF FIELD AEROBIC BIODEGRADATION RATES TO LABORATORY

    Science.gov (United States)

    It is common to use bioventing as a polishing step for soil vapor extraction. It was originally planned to use soil vapor extraction and bioventing at a former landfill site in Delaware but laboratory scale biodegradation studies indicated that most of the volatile organic compou...

  2. Effect of biodegradation on steranes and terpanes in crude oils

    Energy Technology Data Exchange (ETDEWEB)

    Seifert, W.K.; Moldowan, J.M.

    1979-01-01

    Steranes and terpanes biodegrade at a slower rate than isoprenoids and survive moderate biodegradation. Heavy biodegradation results in destruction of regular steranes, survival of diasteranes (20R better than 20S) and tricyclic terpanes and transformation of hopanes to Ring A/B demethylated hopanes. These survivors can be used as source fingerprints in biodegraded crudes. The structure of predominant steranes in undegraded to moderately degraded fossil fuels was proven to be 14..beta..,17..beta..(H) (20R + S) by molecular spectroscopy. These compounds plus the 20S epimers of regular 5..cap alpha..-steranes (20R) were identified as major constituents and their 5..beta..-counterparts as minor components in a cholestane isomerizate (300/sup 0/C, Pt on C), allowing assessment of relative thermodynamic stabilities. An observed increase of optical activity in heavily degraded crudes from three different basins is interpreted to be the result of bacterial transformation of terpanes and steranes to new optically active species plus enrichment of the latter by n + isoparaffin depletion rather than total bacterial synthesis. Diagnostic ion profiling by GC-MS-C is a convenient tool for surveying the relative abundance of individual diasteranes and regular steranes plus distinguishing epimeric and ring skeletal isomeric series in complex fossil fuel mixtures. A new practical method of determining the absolute quantities of individual steranes by spiking with 5..beta..-cholane and integration of mass chromatograms is described. 6 tables; 6 figures.

  3. Biodegradation of oil refinery wastes under OPA and CERCLA

    Energy Technology Data Exchange (ETDEWEB)

    Gamblin, W.W.; Banipal, B.S.; Myers, J.M. [Ecology and Environment, Inc., Dallas, TX (United States)] [and others

    1995-12-31

    Land treatment of oil refinery wastes has been used as a disposal method for decades. More recently, numerous laboratory studies have been performed attempting to quantify degradation rates of more toxic polycyclic aromatic hydrocarbon compounds (PAHs). This paper discusses the results of the fullscale aerobic biodegradation operations using land treatment at the Macmillan Ring-Free Oil refining facility. The tiered feasibility approach of evaluating biodegradation as a treatment method to achieve site-specific cleanup criteria, including pilot biodegradation operations, is discussed in an earlier paper. Analytical results of biodegradation indicate that degradation rates observed in the laboratory can be met and exceeded under field conditions and that site-specific cleanup criteria can be attained within a proposed project time. Also prevented are degradation rates and half-lives for PAHs for which cleanup criteria have been established. PAH degradation rates and half-life values are determined and compared with the laboratory degradation rates and half-life values which used similar oil refinery wastes by other in investigators (API 1987).

  4. Diesel Pollution Biodegradation: Synergetic Effect of Mycobacterium and Filamentous Fungi

    Institute of Scientific and Technical Information of China (English)

    YOU-QING LI; HONG-FANG LIU; ZHEN-LE TIAN; LI-HUA ZHU; YIN-GHUI WU; HE-QING TANG

    2008-01-01

    Objective To biodegrade the diesel pollution in aqueous solution inoculated with Mycobacterium and filamentous fungi.Methods Bacteria sampled from petroleum hydrocarbons contaminated sites in Karamay Oilfield were isolated and identified as Mycobacterium hyalinum (MH) and cladosporium. Spectrophotometry and gas chromatography (GC) were used to analyze of the residual concentrations of diesel oil and its biodegradation products. Results From the GC data, the values of apparent biodegradation ratio of the bacterial strain MH to diesel oil were close to those obtained in the control experiments. Moreover, the number of MH did not increase with degradation time. However, by using n-octadecane instead of diesel oil, the real biotic degradation ratio increased to 20.9% over 5 days of degradation. Cladosporium strongly biodegraded diesel oil with a real degradation ratio of up to 34% after 5 days treatment. When the two strains were used simultaneously, a significant synergistic effect between them resulted in almost cornplete degradation of diesel off, achieving a total diesel removal of 99% over 5 days of treatment, in which one part of about 80% and another part of about 19% were attributed to biotic and abiotic processes, respectively. Conclusion The observed synergistic effect was closely related to the aromatics-degrading ability of Cladosporium, which favored the growth of MH and promoted the bioavailability of diesel oil.

  5. AUTOLOGOUS VEIN SUPPORTED WITH A BIODEGRADABLE PROSTHESIS FOR ARTERIAL GRAFTING

    NARCIS (Netherlands)

    ZWEEP, HP; SATOH, S; VANDERLEI, B; HINRICHS, WLJ; DIJK, F; FEIJEN, J; WILDEVUUR, CRH

    1993-01-01

    To evaluate the potential of a supporting, compliant, biodegradable prosthesis to function as a temporary protective scaffold for autologous vein grafts in the arterial circulation, we implanted vein grafts into the carotid arteries of rabbits, either with (composite grafts) or without (control graf

  6. A review on biodegradable materials for cardiovascular stent application

    Science.gov (United States)

    Hou, Li-Da; Li, Zhen; Pan, Yu; Sabir, MuhammadIqbal; Zheng, Yu-Feng; Li, Li

    2016-09-01

    A stent is a medical device designed to serve as a temporary or permanent internal scaffold to maintain or increase the lumen of a body conduit. The researchers and engineers diverted to investigate biodegradable materials due to the limitation of metallic materials in stent application such as stent restenosis which requires prolonged anti platelet therapy, often result in smaller lumen after implantation and obstruct re-stenting treatments. Biomedical implants with temporary function for the vascular intervention are extensively studied in recent years. The rationale for biodegradable stent is to provide the support for the vessel in predicted period of time and then degrading into biocompatible constituent. The degradation of stent makes the re-stenting possible after several months and also ameliorates the vessel wall quality. The present article focuses on the biodegradable materials for the cardiovascular stent. The objective of this review is to describe the possible biodegradable materials for stent and their properties such as design criteria, degradation behavior, drawbacks and advantages with their recent clinical and preclinical trials.

  7. Development and evaluation of an online CO(2) evolution test and a multicomponent biodegradation test system.

    Science.gov (United States)

    Strotmann, Uwe; Reuschenbach, Peter; Schwarz, Helmut; Pagga, Udo

    2004-08-01

    Well-established biodegradation tests use biogenously evolved carbon dioxide (CO(2)) as an analytical parameter to determine the ultimate biodegradability of substances. A newly developed analytical technique based on the continuous online measurement of conductivity showed its suitability over other techniques. It could be demonstrated that the method met all criteria of established biodegradation tests, gave continuous biodegradation curves, and was more reliable than other tests. In parallel experiments, only small variations in the biodegradation pattern occurred. When comparing the new online CO(2) method with existing CO(2) evolution tests, growth rates and lag periods were similar and only the final degree of biodegradation of aniline was slightly lower. A further test development was the unification and parallel measurement of all three important summary parameters for biodegradation--i.e., CO(2) evolution, determination of the biochemical oxygen demand (BOD), and removal of dissolved organic carbon (DOC)--in a multicomponent biodegradation test system (MCBTS). The practicability of this test method was demonstrated with aniline. This test system had advantages for poorly water-soluble and highly volatile compounds and allowed the determination of the carbon fraction integrated into biomass (heterotrophic yield). The integrated online measurements of CO(2) and BOD systems produced continuous degradation curves, which better met the stringent criteria of ready biodegradability (60% biodegradation in a 10-day window). Furthermore the data could be used to calculate maximal growth rates for the modeling of biodegradation processes.

  8. In situ biodegradation potential of aromatic hydrocarbons in anaerobic groundwaters

    Science.gov (United States)

    Acton, D. W.; Barker, J. F.

    1992-04-01

    Three types of experiments were conducted to assess the potential for enhancing the in situ biodegradation of nine aromatic hydrocarbons in anaerobic, leachate-impacted aquifers at North Bay, Ontario, and at Canada Forces Base Borden. Laboratory micrososms containing authentic aquifer material and groundwater from the North Bay site were amended with nitrate and glucose. No significant losses of aromatic hydrocarbons were observed compared to unamended controls, over a period of 187 days. A total of eight in situ biodegradation columns were installed in the North Bay and Borden aquifers. Remedial additions included electron acceptors (nitrate and sulphate) and primary substrates (acetate, lactate and yeast extract). Six aromatic hydrocarbons [toluene, ethylbenzene, m-xylene, o-xylene, cumene and 1,2,4-trimethylbenzene ( 1,2,4-TMB)] were completely degraded in at least one in situ column at the North Bay site. Only toluene was degraded in the Borden aquifer. In all cases, aromatic hydrocarbon attenuation was attributed to biodegradation by methanogenic and fermentative bacteria. No evidence of aromatic hydrocarbon degradation was observed in columns remediated with nitrate or primary substrates. A continuous forced gradient injection experiment with sulphate addition was conducted at the North Bay site over a period of 51 days. The concentration of six aromatic hydrocarbons was monitored over time in the injection wells and at piezometer fences located 2, 5 and 10 m downgradient. All compounds except toluene reached injection concentration between 14 and 26 days after pumping began, and showed some evidence of selective retardation. Toluene broke through at a subdued concentration (˜ 50% of injection levels), and eventually declined to undetectable levels on day 43. This attenuation was attributed to adaptation and biodegradation by anaerobic bacteria. The results from these experiments indicate that considerable anaerobic biodegradation of aromatic hydrocarbons in

  9. The effects of biodegradation and photodegradation on DOM optical properties

    Science.gov (United States)

    Hansen, A.; Moll, L.; Kraus, T. E.

    2012-12-01

    In aquatic environments, dissolved organic matter (DOM) plays a central role in ecosystem biogeochemistry and is important because it affects light penetration, food web dynamics, and pollutant transport. While knowing DOM concentration is important, it is also critical to characterize DOM composition because its chemical make-up determines how it reacts in the environment. Furthermore, the ability to determine the origin of DOM can help inform watershed management and predict future trends. The main factors affecting DOM composition include (1) original source material, (2) biodegradation, and (3) photodegradation. Many studies use optical properties (absorbance and fluorescence) to infer DOM composition and source, however there are few controlled laboratory studies using endmember sources. Here DOM optical properties of eight endmember sources-including soil, plant and algal leachates-from San Francisco Bay Delta wetlands were investigated following biological and photochemical degradation during a three month incubation period. The effects of photoexposure were examined at various points along the biodegradation curve to simulate photodegradation occurring as microorganisms consumed and transformed the bioavailable DOM. Samples were analyzed for dissolved organic carbon (DOC) concentration, absorbance, and fluorescence. While our results showed little change in DOC concentration in the soil leachate over the 3 month study period, DOC concentrations in plant and algal leachates decrease by over 70% within the first three days of biodegradation. As expected, biodegradation led to an increase in fluorescence index (FI), humic index (HIX), and specific absorbance (SUVA) values. Carbon-normalized fluorescence values increased for humic-like components associated with Peaks C and A, but decreased for more labile material, which is associated with Peak T. While the initial FI for plant and algal leachates was similar to soil, the FI for both of these sources increased

  10. Spatial uncoupling of biodegradation, soil respiration, and PAH concentration in a creosote contaminated soil.

    Science.gov (United States)

    Bengtsson, Göran; Törneman, Niklas; Yang, Xiuhong

    2010-09-01

    Hotspots and coldspots of concentration and biodegradation of polycyclic aromatic hydrocarbons (PAHs) marginally overlapped at the 0.5-100 m scale in a creosote contaminated soil in southern Sweden, suggesting that concentration and biodegradation had little spatial co-variation. Biodegradation was substantial and its spatial variability considerable and highly irregular, but it had no spatial autocorrelation. The soil concentration of PAHs explained only 20-30% of the variance of their biodegradation. Soil respiration was spatially autocorrelated. The spatial uncoupling between biodegradation and soil respiration seemed to be governed by the aging of PAHs in the soil, since biodegradation of added 13C phenanthrene covaried with both soil respiration and microbial biomass. The latter two were also correlated with high concentrations of phospholipid fatty acids (PLFAs) that are common in gram-negative bacteria. However, several of the hotspots of biodegradation coincided with hotspots for the distribution of a PLFA indicative of fungal biomass.

  11. BIOB: a mathematical model for the biodegradation of low solubility hydrocarbons.

    Science.gov (United States)

    Geng, Xiaolong; Boufadel, Michel C; Personna, Yves R; Lee, Ken; Tsao, David; Demicco, Erik D

    2014-06-15

    Modeling oil biodegradation is an important step in predicting the long term fate of oil on beaches. Unfortunately, existing models do not account mechanistically for environmental factors, such as pore water nutrient concentration, affecting oil biodegradation, rather in an empirical way. We present herein a numerical model, BIOB, to simulate the biodegradation of insoluble attached hydrocarbon. The model was used to simulate an experimental oil spill on a sand beach. The biodegradation kinetic parameters were estimated by fitting the model to the experimental data of alkanes and aromatics. It was found that parameter values are comparable to their counterparts for the biodegradation of dissolved organic matter. The biodegradation of aromatics was highly affected by the decay of aromatic biomass, probably due to its low growth rate. Numerical simulations revealed that the biodegradation rate increases by 3-4 folds when the nutrient concentration is increased from 0.2 to 2.0 mg N/L.

  12. Anaerobic biodegradation of soybean biodiesel and diesel blends under sulfate-reducing conditions.

    Science.gov (United States)

    Wu, Shuyun; Yassine, Mohamad H; Suidan, Makram T; Venosa, Albert D

    2016-10-01

    Biotransformation of soybean biodiesel and its biodiesel/petrodiesel blends were investigated under sulfate-reducing conditions. Three blends of biodiesel, B100, B50, and B0, were treated using microbial cultures pre-acclimated to B100 (biodiesel only) and B80 (80% biodiesel and 20% petrodiesel). Results indicate that the biodiesel could be effectively biodegraded in the presence or absence of petrodiesel, whereas petrodiesel could not be biodegraded at all under sulfate-reducing conditions. The kinetics of biodegradation of individual Fatty Acid Methyl Ester (FAME) compounds and their accompanying sulfate-reduction rates were studied using a serum bottle test. As for the biodegradation of individual FAME compounds, the biodegradation rates for the saturated FAMEs decreased with increasing carbon chain length. For unsaturated FAMEs, biodegradation rates increased with increasing number of double bonds. The presence of petrodiesel had a greater effect on the rate of biodegradation of biodiesel than on the extent of removal.

  13. Applying Raman spectroscopy to the assessment of the biodegradation of industrial polyurethanes wastes.

    Science.gov (United States)

    Cregut, Mickael; Bedas, Marion; Assaf, Ali; Durand-Thouand, Marie-José; Thouand, Gérald

    2014-01-01

    Polyether-based polyurethanes (PBP) are extremely problematic polymers due to their long persistence in the environment. Moreover, the assessment of PBP biodegradation remains biased due to the inability of conventional methods to determine how their diverse subunits are degraded. To improve our knowledge of PBP biodegradation, we used Raman spectroscopy to identify patterns of PBP biodegradation. Specifically, PBP biodegradation was assessed using a microbial inoculum isolated from an industrial soil in which polyurethanes have been buried for 40 years. During a 28-day biodegradation assay, the PBP biodegradation level reached 27.5% (w/w), in addition to undergoing profound alteration of the PBP composition as identified by chemical analyses. After microbial degradation, Raman analyses revealed the disappearance of the polymer's amorphous region, which contains a high polyol content, whereas the isocyanate-rich crystalline regions were preserved. The use of Raman spectroscopy appears to be a particularly useful tool to enhance our assessment of polymer biodegradation.

  14. Crude-oil biodegradation via methanogenesis in subsurface petroleum reservoirs.

    Science.gov (United States)

    Jones, D M; Head, I M; Gray, N D; Adams, J J; Rowan, A K; Aitken, C M; Bennett, B; Huang, H; Brown, A; Bowler, B F J; Oldenburg, T; Erdmann, M; Larter, S R

    2008-01-10

    Biodegradation of crude oil in subsurface petroleum reservoirs has adversely affected the majority of the world's oil, making recovery and refining of that oil more costly. The prevalent occurrence of biodegradation in shallow subsurface petroleum reservoirs has been attributed to aerobic bacterial hydrocarbon degradation stimulated by surface recharge of oxygen-bearing meteoric waters. This hypothesis is empirically supported by the likelihood of encountering biodegraded oils at higher levels of degradation in reservoirs near the surface. More recent findings, however, suggest that anaerobic degradation processes dominate subsurface sedimentary environments, despite slow reaction kinetics and uncertainty as to the actual degradation pathways occurring in oil reservoirs. Here we use laboratory experiments in microcosms monitoring the hydrocarbon composition of degraded oils and generated gases, together with the carbon isotopic compositions of gas and oil samples taken at wellheads and a Rayleigh isotope fractionation box model, to elucidate the probable mechanisms of hydrocarbon degradation in reservoirs. We find that crude-oil hydrocarbon degradation under methanogenic conditions in the laboratory mimics the characteristic sequential removal of compound classes seen in reservoir-degraded petroleum. The initial preferential removal of n-alkanes generates close to stoichiometric amounts of methane, principally by hydrogenotrophic methanogenesis. Our data imply a common methanogenic biodegradation mechanism in subsurface degraded oil reservoirs, resulting in consistent patterns of hydrocarbon alteration, and the common association of dry gas with severely degraded oils observed worldwide. Energy recovery from oilfields in the form of methane, based on accelerating natural methanogenic biodegradation, may offer a route to economic production of difficult-to-recover energy from oilfields.

  15. Biodegradation Rates Assessment For An In Situ Bioremediation Process

    Science.gov (United States)

    Troquet, J.; Poutier, F.

    Bioremediation methods seem a promising way of dealing with soil and subsoil con- tamination by organic substances. The biodegradation process is supported by micro- organisms which use the organic carbon from the pollutants as energy source and cells building blocks. However, bioremediation is not yet universally understood and its success is still an intensively debated issue because all soils and groundwater are not able to sustain biological growth and, then, cannot be successfully bioremediated. The outcome of each degradation process depends on several factors, which, such as oxygen transfer and pollutant bio-availability, can be controlled and are therefore key variables of such bioremediation processes. Then, it is essential to carry out a fea- sibility study based on pilot-testing before starting a remediation project in order to determine the best formulation of nutrients and bacteria to use for the specific condi- tions encountered. The scope of this work is to study the main parameters of the process and its physi- cal limiting steps in order to determine the biodegradation rates in a specific case of contamination. Several ground samples from an actual petroleum hydrocarbon con- taminated site have been laboratory tested. Five fixed bed column reactors, enabling the study of the influence of the different op- erating variables on the biodegradation kinetics, are used. The stoichiometric equation for bacteria growth and pollutant degradation has been established, allowing the de- termination of mass balances. Biodegradation monitoring is achieved by continuously measuring the emissions of carbon dioxide production and intermittently by analysing residual hydrocarbons. Results lead to the knowledge of biodegradation rates which allow to determine the treatment duration and cost.

  16. Preliminary experience with biodegradable implants for fracture fixation

    Directory of Open Access Journals (Sweden)

    Dhillon Mandeep

    2008-01-01

    Full Text Available Background: Biodegradable implants were designed to overcome the disadvantages of metal-based internal fixation devices. Although they have been in use for four decades internationally, many surgeons in India continue to be skeptical about the mechanical strength of biodegradable implants, hence this study. Materials and Methods: A prospective study was done to assess the feasibility and surgeon confidence level with biodegradable implants over a 12-month period in an Indian hospital. Fifteen fractures (intra-articular, metaphyseal or small bone fractures were fixed with biodegradable implants. The surgeries were randomly scheduled so that different surgeons with different levels of experience could use the implants for fixation. Results: Three fractures (one humeral condyle, two capitulum, were supplemented by additional K-wires fixation. Trans-articular fixator was applied in two distal radius and two pilon fractures where bio-pins alone were used. All fractures united, but in two cases the fracture displaced partially during the healing phase; one fibula due to early walking, and one radius was deemed unstable even after bio-pin and external fixator. Conclusions: Biodegradable -implants are excellent for carefully selected cases of intra-articular fractures and some small bone fractures. However, limitations for use in long bone fractures persist and no great advantage is gained if a "hybrid" composite is employed. The mechanical properties of biopins and screws in isolation are perceived to be inferior to those of conventional metal implants, leading to low confidence levels regarding the stability of reduced fractures; these implants should be used predominantly in fracture patterns in which internal fixation is subjected to minimal stress.

  17. Toxicity of Fluoranthene and Its Biodegradation by Cyclotella caspia Alga

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Fluoranthene is one of the polynuclear aromatic hydrocarbons with four benzene rings. Because of its toxicity,mutagenicity, and carcinogenicity, fluoranthene is on the black lists of 129 and 68 priority pollutants established by US Environmental Protection Agency and the People's Republic of China, respectively. In recent years, the amount of fluoranthene in the aquatic environment has been increasing with increases in anthropogenic discharge. Based on the biological investigation of tidal water in the Futian mangrove, Cyclotella caspia was selected as the dominant algal species to determine the toxicity of fluoranthene towards C. caspia alga and to investigate the biodegradation of fluoranthene by C. caspia under pure culture. The toxicity experiment showed that the 96-h EC50 vaiue for fluoranthene was 0.2 mg/mL. Four parameters, namely C. caspia algal growth rate,chlorophyll (Chi) a content, cell morphology, and superoxide dismutase (SOD) activity, were chosen as indices of toxicity and were measured at 6 d (144 h). The results showed that: (i) the toxicity of fluoranthene towards C.caspia alga was obvious; (ii) C. caspia algal growth rate and Chi a content decreased with increasing concentrations of fluoranthene; and (iii) the rate of cell deformation and SOD activity increased with increasing concentrations of fluoranthene. The biodegradation experiment showed that: (i) the rate of physical degradation of fluoranthene was only 5.86%; (ii) the rate of biodegradation of fluoranthene on the 1st and 6th days (i.e. at 24 and 144 h) was approximately 35% and 85%, respectively; and (iii) the biodegradation capability of C. caspia alga towards fluoranthene was high. It is suggested that further investigations on the toxicity of fluoranthene towards algae, as well as on algal biodegradation mechanisms, are of great importance to use C. caspia as a biological treatment species in an organic wastewater treatment system.

  18. Development of Biodegradable Plastic as Mango Fruit Bag

    Directory of Open Access Journals (Sweden)

    Andres M Tuates jr

    2016-10-01

    Full Text Available Plastics have achieved a dominant position in agriculture because of their transparency, lightness in weight, impermeability to water and their resistance to microbial attack. It is use as food and fruits packaging, fruit bag, food container, seedling bag, mulching film, protective for greenhouse, dryer shed and among others. However, this generates higher quantity of wastes that are difficult to dispose by farmers. The plastic residues remain on the soil for some years as large pieces and they are impediment to plant growth and also a potential hazard to animals if the land is subsequently put down to grass. To address these problems, the project aim to develop and evaluate the biodegradable film for mango fruit bag during development. Cassava starch and polybutylene succinate (PBS was used in the development biodegradable film. The PBS and starch was melt-blended in a twin-screw extruder and then blown into film extrusion machine. The physic-chemical-mechanical properties of biodegradable fruit bag were done following standard methods of test. Field testing of fruit bag was also conducted to evaluate its durability and efficiency field condition.  The PHilMech-FiC fruit bag is made of biodegradable material measuring 6 x 8 inches with a thickness of 150 microns. The tensile strength is within the range of LDPE while the elongation is within the range of HDPE. However, it has higher density, thickness swelling and absorbed more water. It is projected that after thirty six (36 weeks, the film will be totally degraded. Results of field testing shows that the quality of harvested fruits using PHilMech-FiC biodegradable fruit bag in terms of percent marketable, non-marketable and export, peel color at ripe stage, flesh color, TSS, oBrix, percent edible portion is comparable with the existing bagging materials such as Chinese brown paper bag  and old newspaper.  

  19. Biodegradable Magnetic Particles for Cellular MRI

    Science.gov (United States)

    Nkansah, Michael Kwasi

    Cell transplantation has the potential to treat numerous diseases and injuries. While magnetic particle-enabled, MRI-based cell tracking has proven useful for visualizing the location of cell transplants in vivo, current formulations of particles are either too weak to enable single cell detection or have non-degradable polymer matrices that preclude clinical translation. Furthermore, the off-label use of commercial agents like Feridex®, Bangs beads and ferumoxytol for cell tracking significantly stunts progress in the field, rendering it needlessly susceptible to market externalities. The recent phasing out of Feridex from the market, for example, heightens the need for a dedicated agent specifically designed for MRI-based cell tracking. To this end, we engineered clinically viable, biodegradable particles of iron oxide made using poly(lactide-co-glycolide) (PLGA) and demonstrated their utility in two MRI-based cell tracking paradigms in vivo. Both micro- and nanoparticles (2.1±1.1 μm and 105±37 nm in size) were highly magnetic (56.7-83.7 wt% magnetite), and possessed excellent relaxometry (r2* relaxivities as high as 614.1 s-1mM-1 and 659.1 s -1mM-1 at 4.7 T respectively). Magnetic PLGA micropartides enabled the in vivo monitoring of neural progenitor cell migration to the olfactory bulb in rat brains over 2 weeks at 11.7 T with ˜2-fold greater contrast-to-noise ratio and ˜4-fold better sensitivity at detecting migrated cells in the olfactory bulb than Bangs beads. Highly magnetic PLGA nanoparticles enabled MRI detection (at 11.7 T) of up to 10 rat mesenchymal cells transplanted into rat brain at 100-μm resolution. Highly magnetic PLGA particles were also shown to degrade by 80% in mice liver over 12 weeks in vivo. Moreover, no adverse effects were observed on cellular viability and function in vitro after labeling a wide range of cells. Magnetically labeled rat mesenchymal and neural stem cells retained their ability to differentiate into multiple

  20. USE OF POROUS BIODEGRADABLE POLYMER IMPLANTS IN MENISCUS RECONSTRUCTION .2. BIOLOGICAL EVALUATION OF POROUS BIODEGRADABLE POLYMER IMPLANTS IN MENISCI

    NARCIS (Netherlands)

    ELEMA, H; DEGROOT, JH; NIJENHUIS, AJ; PENNINGS, AJ; VETH, RPH; JANSEN, HWB

    1990-01-01

    Several series of porous, biodegradable PU/PLLA foams were used for meniscus reconstruction in dogs. PLLA-fiber reinforced PU/PLLA composites, PU/PLLA, and PU foams were implanted in severe meniscus lesions. The healing process was initiated as a result of blood vessels' and other cells' ingrowth in

  1. Biodegradation of free cyanide and subsequent utilisation of biodegradation by-products by Bacillus consortia: optimisation using response surface methodology.

    Science.gov (United States)

    Mekuto, Lukhanyo; Ntwampe, Seteno Karabo Obed; Jackson, Vanessa Angela

    2015-07-01

    A mesophilic alkali-tolerant bacterial consortium belonging to the Bacillus genus was evaluated for its ability to biodegrade high free cyanide (CN(-)) concentration (up to 500 mg CN(-)/L), subsequent to the oxidation of the formed ammonium and nitrates in a continuous bioreactor system solely supplemented with whey waste. Furthermore, an optimisation study for successful cyanide biodegradation by this consortium was evaluated in batch bioreactors (BBs) using response surface methodology (RSM). The input variables, that is, pH, temperature and whey-waste concentration, were optimised using a numerical optimisation technique where the optimum conditions were found to be as follows: pH 9.88, temperature 33.60 °C and whey-waste concentration of 14.27 g/L, under which 206.53 mg CN(-)/L in 96 h can be biodegraded by the microbial species from an initial cyanide concentration of 500 mg CN(-)/L. Furthermore, using the optimised data, cyanide biodegradation in a continuous mode was evaluated in a dual-stage packed-bed bioreactor (PBB) connected in series to a pneumatic bioreactor system (PBS) used for simultaneous nitrification, including aerobic denitrification. The whey-supported Bacillus sp. culture was not inhibited by the free cyanide concentration of up to 500 mg CN(-)/L, with an overall degradation efficiency of ≥ 99 % with subsequent nitrification and aerobic denitrification of the formed ammonium and nitrates over a period of 80 days. This is the first study to report free cyanide biodegradation at concentrations of up to 500 mg CN(-)/L in a continuous system using whey waste as a microbial feedstock. The results showed that the process has the potential for the bioremediation of cyanide-containing wastewaters.

  2. Biodegradable polymers: emerging excipients for the pharmaceutical and medical device industries.

    Directory of Open Access Journals (Sweden)

    Bhavesh Patel

    2013-12-01

    Full Text Available Worldwide many researchers are exploring the potential use of biodegradable polymerics as carriers for a wide range of therapeutic applications. In the past two decades, considerable progress has been made in the development of biodegradable polymeric materials, mainly in the biomedical and pharmaceutical industries due to their versatility, biocompatibility and biodegradability properties. The present review focuses on the use of biodegradable polymers in various therapeutic areas like orthopedic and contraceptive device, surgical sutures, implants, depot parenteral injections, etc. Biodegradable polymers have also contributed significantly to the development of drug-eluting stents (DES used for the treatment of obstructive coronary artery disease, such as angioplasty. Biodegradable synthetic polymers have potential applications in orthopedic device fixation due to properties that impact bone healing, formation, regeneration or substitution in the human body. The present review also emphasizes areas such as the chemistry of polymer synthesis, factors affecting the biodegradation, methods for the production of biodegradable polymer based formulations, the application of biodegradable polymers in dental implants, nasal drug deliveries, contraceptive devices, immunology, gene, transdermal, ophthalmic and veterinary applications, as well as, the sterilization of biodegradable based formulations and regulatory considerations for product filing.

  3. Development and Evaluation of an Online CO2 Evolution Test and a Multicomponent Biodegradation Test System

    Science.gov (United States)

    Strotmann, Uwe; Reuschenbach, Peter; Schwarz, Helmut; Pagga, Udo

    2004-01-01

    Well-established biodegradation tests use biogenously evolved carbon dioxide (CO2) as an analytical parameter to determine the ultimate biodegradability of substances. A newly developed analytical technique based on the continuous online measurement of conductivity showed its suitability over other techniques. It could be demonstrated that the method met all criteria of established biodegradation tests, gave continuous biodegradation curves, and was more reliable than other tests. In parallel experiments, only small variations in the biodegradation pattern occurred. When comparing the new online CO2 method with existing CO2 evolution tests, growth rates and lag periods were similar and only the final degree of biodegradation of aniline was slightly lower. A further test development was the unification and parallel measurement of all three important summary parameters for biodegradation—i.e., CO2 evolution, determination of the biochemical oxygen demand (BOD), and removal of dissolved organic carbon (DOC)—in a multicomponent biodegradation test system (MCBTS). The practicability of this test method was demonstrated with aniline. This test system had advantages for poorly water-soluble and highly volatile compounds and allowed the determination of the carbon fraction integrated into biomass (heterotrophic yield). The integrated online measurements of CO2 and BOD systems produced continuous degradation curves, which better met the stringent criteria of ready biodegradability (60% biodegradation in a 10-day window). Furthermore the data could be used to calculate maximal growth rates for the modeling of biodegradation processes. PMID:15294794

  4. Kinetics of Organic Matter Biodegradation in Leachate from Tobacco Waste

    Directory of Open Access Journals (Sweden)

    Briški, F.

    2012-09-01

    Full Text Available Treatment of wastes and leachate evolved in landfills is today an imperative due to rigorous environmental protection legislation. In this work, biodegradation of the organic fraction in tobaccowaste leachate was studied. Experiments were carried out in a batch reactor at initial concentra tion of activated sludge of 3.03 g dm–3 and different initial concentrations of organic matter in leachate, expressed as COD, which ranged from 0.5 to 3.0 g dm–3 . The working volume of the reactor (Fig. 1 was 7 dm3 within the cylindrical porous liner and it was filled with the suspension of leachate and activated sludge . The liner was designed such that it did not allow activated sludge to pass through. Continuous up-flow aeration was provided by a membrane pump. The temperature during the biodegradation process was 23 ± 2 °C. Dissolved oxygen, pH and temperature in reactor were monitored continuously by probes connected to a remote meter. Toxicity of leachate was performed by toxicity test using marine bacteria Vibrio fischeri before starting with the biodegradation in the batch reactor. The obtained results showed that effective concentration of leachate is EC 50 = 1.6 g dm–3 and toxicity impact index is TII50 = 9.99, meaning that untreated leachate must not be discharged into the environment before treatment. The results of the biodegradation process of leachate in batch reactor are presented in Table 1 and Fig. 2. The ratio γXv/γX was almost constant throughout the experiments and ranged from 0.69 do 0.73. This implies that the concentration of biomass remained unchanged during the experiments, and average yield was 5.26 %. The important kinetic and stoichiometric parameters required for performance of the biological removal process, namely the Y, Ks, Kd, and μmax were calculated from the batch experiments (Table 2. The experimental results of the influence of initial substrate concentrations on substrate degradation rate, and influence of

  5. Biodegradation of a surrogate naphthenic acid under denitrifying conditions.

    Science.gov (United States)

    Gunawan, Yetty; Nemati, Mehdi; Dalai, Ajay

    2014-03-15

    Extraction of bitumen from the shallow oil sands generates extremely large volumes of waters contaminated by naphthenic acid which pose severe environmental and ecological risks. Aerobic biodegradation of NA in properly designed bioreactors has been investigated in our earlier works. In the present work, anoxic biodegradation of trans-4-methyl-1-cyclohexane carboxylic acid (trans-4MCHCA) coupled to denitrification was investigated as a potential ex situ approach for the treatment of oil sand process waters in bioreactors whereby excessive aeration cost could be eliminated, or as an in situ alternative for the treatment of these waters in anoxic stabilization ponds amended with nitrate. Using batch and continuous reactors (CSTR and biofilm), effects of NA concentration (100-750mgL(-1)), NA loading rate (up to 2607.9mgL(-1)h(-1)) and temperature (10-35°C) on biodegradation and denitrification processes were evaluated. In the batch system biodegradation of trans-4MCHCA coupled to denitrification occurred even at the highest concentration of 750mgL(-1). Consistent with the patterns reported for aerobic biodegradation, increase in initial concentration of NA led to higher biodegradation and denitrification rates and the optimum temperature was determined as 23-24°C. In the CSTR, NA removal and nitrate reduction rates passed through a maximum due to increases in NA loading rate. NA loading rate of 157.8mgL(-1)h(-1) at which maximum anoxic NA and nitrate removal rates (105.3mgL(-1)h(-1) and 144.5mgL(-1)h(-1), respectively) occurred was much higher than those reported for the aerobic alternative (NA loading and removal rates: 14.2 and 9.6mgL(-1)h(-1), respectively). In the anoxic biofilm reactor removal rates of NA and nitrate were dependent on NA loading rate in a linear fashion for the entire range of applied loading rates. The highest loading and removal rates for NA were 2607.9 and 2028.1mgL(-1)h(-1), respectively which were at least twofold higher than the values

  6. Biodegradation of PuEDTA and Impacts on Pu Mobility

    Energy Technology Data Exchange (ETDEWEB)

    Bolton, H., Jr.; Rai, D.; Xun, L.

    2004-03-17

    The contamination of many DOE sites by Pu presents a long-term problem because of its long half-life (240,000 yrs) and the low drinking water standard (<10{sup -12} M). EDTA was co-disposed with radionuclides (e.g., Pu, {sup 60}Co), formed strong complexes, and enhanced radionuclide transport at several DOE sites. Biodegradation of EDTA should decrease Pu mobility. One objective of this project was to determine the biodegradation of EDTA in the presence of PuEDTA complexes. The aqueous system investigated at pH 7 (10{sup -4} M EDTA and 10{sup -6} M Pu) contained predominantly Pu(OH){sub 2}EDTA{sup 2-}. The EDTA was degraded at a faster rate in the presence of Pu. As the total concentration of both EDTA and PuEDTA decreased (i.e., 10{sup -5} M EDTA and 10{sup -7} M PuEDTA), the presence of Pu decreased the biodegradation rate of the EDTA. It is currently unclear why the concentration of Pu directly affects the increase/decrease in rate of EDTA biodegradation. The soluble Pu concentration decreased, in agreement with thermodynamic predictions, as the EDTA was biodegraded, indicating that biodegradation of EDTA will decrease Pu mobility when the Pu is initially present as Pu(IV)EDTA. A second objective was to investigate how the presence of competing metals, commonly encountered in geologic media, will influence the speciation and biodegradation of Pu(IV)-EDTA. Studies on the solubilities of Fe(OH){sub 3}(s) and of Fe(OH){sub 3}(s) plus PuO{sub 2}(am) in the presence of EDTA and as a function of pH showed that Fe(III) out competes the Pu(IV) for the EDTA complex, thereby showing that Pu(IV) will not form stable complexes with EDTA for enhanced transport of Pu in Fe(III) dominated subsurface systems. A third objective is to investigate the genes and enzymes involved in EDTA biodegradation. BNC1 can use EDTA and another synthetic chelating agent nitrilotriacetate (NTA) as sole carbon and nitrogen sources. The same catabolic enzymes are responsible for both EDTA and NTA

  7. Reactor modeling in heterogeneous photocatalysis: toxicity and biodegradability assessment.

    Science.gov (United States)

    Satuf, M L; José, S; Paggi, J C; Brandi, R J; Cassano, A E; Alfano, O M

    2010-01-01

    Photocatalysis employing titanium dioxide is a useful method to degrade a wide variety of organic and inorganic pollutants from water and air. However, the application of this advanced oxidation process at industrial scale requires the development of mathematical models to design and scale-up photocatalytic reactors. In the present work, intrinsic kinetic expressions previously obtained in a laboratory reactor are employed to predict the performance of a bench scale reactor of different configuration and operating conditions. 4-Chlorophenol was chosen as the model pollutant. The toxicity and biodegradability of the irradiated mixture in the bench photoreactor was also assessed. Good agreement was found between simulation and experimental data. The root mean square error of the estimations was 9.9%. The photocatalytic process clearly enhances the biodegradability of the reacting mixture, and the initial toxicity of the pollutant was significantly reduced by the treatment.

  8. Advances in biodegradable nanomaterials for photothermal therapy of cancer.

    Science.gov (United States)

    He, Chao-Feng; Wang, Shun-Hao; Yu, Ying-Jie; Shen, He-Yun; Zhao, Yan; Gao, Hui-Ling; Wang, Hai; Li, Lin-Lin; Liu, Hui-Yu

    2016-09-01

    Photothermal cancer therapy is an alternative to chemotherapy, radiotherapy, and surgery. With the development of nanophotothermal agents, this therapy holds immense potential in clinical translation. However, the toxicity issues derived from the fact that nanomaterials are trapped and retained in the reticuloendothelial systems limit their biomedical application. Developing biodegradable photothermal agents is the most practical route to address these concerns. In addition to the physicochemical properties of nanomaterials, various internal and external stimuli play key roles on nanomaterials uptake, transport, and clearance. In this review, we summarized novel nanoplatforms for photothermal therapy; these nanoplatforms can elicit stimuli-triggered degradation. We focused on the recent innovative designs endowed with biodegradable photothermal agents under different stimuli, including enzyme, pH, and near-infrared (NIR) laser.

  9. Advances in biodegradable nanomaterials for photothermal therapy of cancer

    Institute of Scientific and Technical Information of China (English)

    Chao-Feng He; Shun-Hao Wang; Ying-Jie Yu; He-Yun Shen; Yan Zhao; Hui-Ling Gao; Hai Wang; Lin-Lin Li; Hui-Yu Liu

    2016-01-01

    Photothermal cancer therapy is an alternative to chemotherapy, radiotherapy, and surgery. With the development of nanophotothermal agents, this therapy holds immense potential in clinical translation. However, the toxicity issues derived from the fact that nanomaterials are trapped and retained in the reticuloendothelial systems limit their biomedical application. Developing biodegradable photothermal agents is the most practical route to address these concerns. In addition to the physicochemical properties of nanomaterials, various internal and external stimuli play key roles on nanomaterials uptake, transport, and clearance. In this review, we summarized novel nanoplatforms for photothermal therapy; these nanoplatforms can elicit stimuli-triggered degradation. We focused on the recent innovative designs endowed with biodegradable photothermal agents under different stimuli, including enzyme, pH, and near-infrared (NIR) laser.

  10. Bacterial biodegradation of neonicotinoid pesticides in soil and water systems.

    Science.gov (United States)

    Hussain, Sarfraz; Hartley, Carol J; Shettigar, Madhura; Pandey, Gunjan

    2016-12-01

    Neonicotinoids are neurotoxic systemic insecticides used in plant protection worldwide. Unfortunately, application of neonicotinoids affects both beneficial and target insects indiscriminately. Being water soluble and persistent, these pesticides are capable of disrupting both food chains and biogeochemical cycles. This review focuses on the biodegradation of neonicotinoids in soil and water systems by the bacterial community. Several bacterial strains have been isolated and identified as capable of transforming neonicotinoids in the presence of an additional carbon source. Environmental parameters have been established for accelerated transformation in some of these strains. Studies have also indicated that enhanced biotransformation of these pesticides can be accomplished by mixed microbial populations under optimised environmental conditions. Substantial research into the identification of neonicotinoid-mineralising bacterial strains and identification of the genes and enzymes responsible for neonicotinoid degradation is still required to complete the understanding of microbial biodegradation pathways, and advance bioremediation efforts.

  11. Biodegradation of PAHs in Soil: Influence of Initial PAHs Concentration

    Science.gov (United States)

    Kamil, N. A. F. M.; Talib, S. A.

    2016-07-01

    Most studies on biodegradation of Polycyclic Aromatic Hydrocarbons (PAHs) evaluate the effect of initial PAHs concentration in liquid medium. There are limited studies on evaluation in solid medium such as contaminated soil. This study investigated the potential of the bacteria, Corynebacterium urealyticum isolated from municipal sludge in degrading phenanthrene contaminated soil in different phenanthrene concentration. Batch experiments were conducted over 20 days in reactors containing artificially contaminated phenanthrene soil at different concentration inoculated with a bacterial culture. This study established the optimum condition for phenanthrene degradation by the bacteria under nonindigenous condition at 500 mg/kg of initial phenanthrene concentration. High initial concentration required longer duration for biodegradation process compared to low initial concentration. The bacteria can survive for three days for all initial phenanthrene concentrations.

  12. Biodegradation and recycling potential of barrier coated paperboards

    Directory of Open Access Journals (Sweden)

    Nazhad, M.

    2007-05-01

    Full Text Available Four commercial barrier coated boards (i.e., internally-sized uncoated board, one-side polyethylene coated board, double-side polyethylene coated board, and multilayer laminated board were examined for biodegradation using a soil burial approach on a laboratory scale. It was observed that the base-boards were fully biodegradable in a matter of weeks or months, and the degradation process could be accelerated either by sample size modification or enrichment of the soil microbial population. Freezing pretreatment of boards or the fiber directionality of boards had no influence on the rate of degradation. The boards were also found to be recyclable following a simple procedure of re-slushing and screening. The base-boards became almost fully separated from the polyethylene coated material without any special pretreatment.

  13. Biodegradability of leachates from Chinese and German municipal solid waste

    Institute of Scientific and Technical Information of China (English)

    SELIC E.; WANG Chi; BOES N., HERBELL J.D.

    2007-01-01

    The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of leachates during storage or landfilling. Leachates ingredients determine the appropriate treatment technique. MSW compositions of the two cities Guilin (China) and Essen (Germany), each with approx. 600000 inhabitants, are used to simulate Chinese and German MSW types. A sequencing batch reactor (SBR) is used, combining aerobic and anaerobic reaction principles, to test the biodegradability of leachates. Leachates are tested for temperature, pH-value, redox potentials, and oxygen concentration. Chemical oxygen demand (COD) values are determined. Within 8 h, the biodegradation rates for both kinds of leachates are more than 90%. Due to the high organic content of Chinese waste, the degradation rate for Guilin MSW leachate is even higher, up to 97%. The effluent from SBR technique is suitable for direct discharge into bodies of water.

  14. Dispersibility-Dependent Biodegradation of Graphene Oxide by Myeloperoxidase.

    Science.gov (United States)

    Kurapati, Rajendra; Russier, Julie; Squillaci, Marco A; Treossi, Emanuele; Ménard-Moyon, Cécilia; Del Rio-Castillo, Antonio Esaú; Vazquez, Ester; Samorì, Paolo; Palermo, Vincenzo; Bianco, Alberto

    2015-08-26

    Understanding human health risk associated with the rapidly emerging graphene-based nanomaterials represents a great challenge because of the diversity of applications and the wide range of possible ways of exposure to this type of materials. Herein, the biodegradation of graphene oxide (GO) sheets is reported by using myeloperoxidase (hMPO) derived from human neutrophils in the presence of a low concentration of hydrogen peroxide. The degradation capability of the enzyme on three different GO samples containing different degree of oxidation on their graphenic lattice, leading to a variable dispersibility in aqueous media is compared. hMPO fails in degrading the most aggregated GO, but succeeds to completely metabolize highly dispersed GO samples. The spectroscopy and microscopy analyses provide unambiguous evidence for the key roles played by hydrophilicity, negative surface charge, and colloidal stability of the aqueous GO in their biodegradation by hMPO catalysis.

  15. Parallel pathways of ethoxylated alcohol biodegradation under aerobic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Zembrzuska, Joanna, E-mail: Joanna.Zembrzuska@put.poznan.pl; Budnik, Irena, E-mail: Irena.Budnik@gmail.com; Lukaszewski, Zenon, E-mail: zenon.lukaszewski@put.poznan.pl

    2016-07-01

    Non-ionic surfactants (NS) are a major component of the surfactant flux discharged into surface water, and alcohol ethoxylates (AE) are the major component of this flux. Therefore, biodegradation pathways of AE deserve more thorough investigation. The aim of this work was to investigate the stages of biodegradation of homogeneous oxyethylated dodecanol C{sub 12}E{sub 9} having 9 oxyethylene subunits, under aerobic conditions. Enterobacter strain Z3 bacteria were chosen as biodegrading organisms under conditions with C{sub 12}E{sub 9} as the sole source of organic carbon. Bacterial consortia of river water were used in a parallel test as an inoculum for comparison. The LC-MS technique was used to identify the products of biodegradation. Liquid-liquid extraction with ethyl acetate was selected for the isolation of C{sub 12}E{sub 9} and metabolites from the biodegradation broth. The LC-MS/MS technique operating in the multiple reaction monitoring (MRM) mode was used for quantitative determination of C{sub 12}E{sub 9}, C{sub 12}E{sub 8}, C{sub 12}E{sub 7} and C{sub 12}E{sub 6}. Apart from the substrate, the homologues C{sub 12}E{sub 8}, C{sub 12}E{sub 7} and C{sub 12}E{sub 6}, being metabolites of C{sub 12}E{sub 9} biodegradation by shortening of the oxyethylene chain, as well as intermediate metabolites having a carboxyl end group in the oxyethylene chain (C{sub 12}E{sub 8}COOH, C{sub 12}E{sub 7}COOH, C{sub 12}E{sub 6}COOH and C{sub 12}E{sub 5}COOH), were identified. Poly(ethylene glycols) (E) having 9, 8 and 7 oxyethylene subunits were also identified, indicating parallel central fission of C{sub 12}E{sub 9} and its metabolites. Similar results were obtained with river water as inoculum. It is concluded that AE, under aerobic conditions, are biodegraded via two parallel pathways: by central fission with the formation of PEG, and by Ω-oxidation of the oxyethylene chain with the formation of carboxylated AE and subsequent shortening of the oxyethylene chain by a

  16. Study on biodegradated ability of thirteen edible fungi to straw

    Institute of Scientific and Technical Information of China (English)

    SONGRui-qing; DENGXun

    2004-01-01

    The biodegradated abilities of 13 edible fungi to straw were studied. The results showed that all the experimental fungi except Tricholama mongolicum had definite biodegradated abilities to the lignin and cellulose of straw. The Ideal fungus for straw degradation was screened out as Pleurotus ostreatus, which showed a higher degradation ability for lignin (17.86%) and lower degradation rate for cellulose (2.24%), with a Selection Factor (SF) of 7.97. The degradation rates of lignin and cellulose for other fungi ranged from 2.30% to 16.54% and 5.60% to 17.32%, respectively, and the SF was very low in range of 0.14 to 2.24.The ratio of colony's diameters to the color-zone (d1/d2) and SF are negative correlation, with a correlation coefficient of -0.1476.

  17. Evaluation of biodegradable plastics for rubber seedling applications

    Science.gov (United States)

    Mansor, Mohd Khairulniza; Dayang Habibah A. I., H.; Kamal, Mazlina Mustafa

    2015-08-01

    The main negative consequence of conventional plastics in agriculture is related to handling the wastes plasticand the associated environmental impact. Hence, a study of different types of potentially biodegradable plastics used for nursery applications have been evaluated on its mechanical,water absorption propertiesand Fourier transform infra-red (FTIR) spectroscopy. Supplied samples from different companies were designated as SF, CF and CO. Most of the polybags exhibited mechanical properties quite similar to the conventional plastics (polybag LDPE). CO polybag which is based on PVA however had extensively higher tensile strength and water absorption properties. FTIR study revealed a characteristics absorbance of conventional plastic, SF, CF and CO biodegradable polybag are associated with polyethylene, poly(butylene adipate-co-terephthalate) (PBAT), polyethylene and polyvinyl alcohol (PVA) structures respectively.

  18. Biodegradability and ecotoxicity of commercially available geothermal heat transfer fluids

    Science.gov (United States)

    Schmidt, Kathrin R.; Körner, Birgit; Sacher, Frank; Conrad, Rachel; Hollert, Henner; Tiehm, Andreas

    2016-03-01

    Commercially available heat transfer fluids used in borehole heat exchangers were investigated for their composition, their biodegradability as well as their ecotoxicity. The main components of the fluids are organic compounds (often glycols) for freezing protection. Biodegradation of the fluids in laboratory studies caused high oxygen depletion as well as nitrate/iron(III) reduction under anaerobic conditions. Additives such as benzotriazoles for corrosion protection were persistent. Ecotoxicity data show that the commercially available fluids caused much higher ecotoxicity than their main organic constituents. Consequently, with regard to groundwater protection pure water as heat transfer medium is recommended. The second best choice is the usage of glycols without any additives. Effects on groundwater quality should be considered during ecological-economical cost-benefit-analyses of further geothermal energy strategies. The protection of groundwater as the most important drinking water resource must take priority over the energy gain from aquifers.

  19. Kinetics of biodegradation of phenolic wastewater in a biofilm reactor.

    Science.gov (United States)

    Lin, Yen-Hui; Hsien, Tzu-Yang

    2009-01-01

    This work presents a mathematical model to describe the biodegradation of phenolic wastewater in a fixed-biofilm process. The model incorporates diffusive mass transport and Haldane kinetics mechanisms. The model was solved using a combination of the orthogonal collocation method and Gear's method. A laboratory-scale column reactor was employed to verify the model. Batch kinetic tests were conducted independently to determine biokinetic parameters for the model simulation with the initial biofilm thickness assumed. The model simulated the phenol effluent concentration results well. Removal efficiency for phenol was approximately 94-96.5% for different hydraulic retention times at a steady-state condition. Model simulations results are in agreement with experimental results. The approaches of model and experiments presented in this paper could be used to design a pilot-scale or full-scale fixed-biofilm reactor system for the biodegradation of phenolic wastewater from petrochemical and oil refining plants.

  20. Preparation of biodegradable microspheres and matrix devices containing naltrexone

    OpenAIRE

    DINARVAND, RASSOUL; Moghadam, Shadi H.; Mohammadyari-Fard, Leyla; Atyabi, Fatemeh

    2003-01-01

    In this study, the use of biodegradable polymers for microencapsulation of naltrexone using solvent evaporation technique is investigated. The use of naltrexone microspheres for the preparation of matrix devices is also studied. For this purpose, poly(L-lactide) (PLA) microspheres containing naltrexone prepared by solvent evaporation technique were compressed at temperatures above the Tg of the polymer. The effect of different process parameters, such as drug/polymer ratio and stirring rate d...

  1. Complex resistivity signatures of ethanol biodegradation in porous media

    Science.gov (United States)

    Personna, Yves Robert; Slater, Lee; Ntarlagiannis, Dimitrios; Werkema, Dale; Szabo, Zoltan

    2013-10-01

    Numerous adverse effects are associated with the accidental release of ethanol (EtOH) and its persistence in the subsurface. Geophysical techniques may permit non-invasive, real time monitoring of microbial degradation of hydrocarbon. We performed complex resistivity (CR) measurements in conjunction with geochemical data analysis on three microbial-stimulated and two control columns to investigate changes in electrical properties during EtOH biodegradation processes in porous media. A Debye Decomposition approach was applied to determine the chargeability (m), normalized chargeability (mn) and time constant (τ) of the polarization magnitude and relaxation length scale as a function of time. The CR responses showed a clear distinction between the bioaugmented and control columns in terms of real (σ‧) and imaginary (σ″) conductivity, phase (ϕ) and apparent formation factor (Fapp). Unlike the control columns, a substantial decrease in σ‧ and increase in Fapp occurred at an early time (within 4 days) of the experiment for all three bioaugmented columns. The observed decrease in σ‧ is opposite to previous studies on hydrocarbon biodegradation. These columns also exhibited increases in ϕ (up to ~ 9 mrad) and σ″ (up to two order of magnitude higher) 5 weeks after microbial inoculation. Variations in m and mn were consistent with temporal changes in ϕ and σ″ responses, respectively. Temporal geochemical changes and high resolution scanning electron microscopy imaging corroborated the CR findings, thus indicating the sensitivity of CR measurements to EtOH biodegradation processes. Our results offer insight into the potential application of CR measurements for long-term monitoring of biogeochemical and mineralogical changes during intrinsic and induced EtOH biodegradation in the subsurface.

  2. Correlating biodegradation to magnetization in oil bearing sedimentary rocks

    Science.gov (United States)

    Emmerton, Stacey; Muxworthy, Adrian R.; Sephton, Mark A.; Aldana, Milagrosa; Costanzo-Alvarez, Vincenzo; Bayona, German; Williams, Wyn

    2013-07-01

    A relationship between hydrocarbons and their magnetic signatures has previously been alluded to but this is the first study to combine extensive geochemical and magnetic data of hydrocarbon-associated samples. We report a detailed study that identifies a connection between magnetic mineralogy and oil biodegradation within oil-bearing sedimentary units from Colombia, Canada Indonesia and the UK. Geochemical data reveal that all the oil samples are derived from mature type-II kerogens deposited in oxygen-poor environments. Biodegradation is evident to some extent in all samples and leads to a decrease in oil quality through the bacterially mediated conversion of aliphatic hydrocarbons to polar constituents. The percentage of oil components and the biodegradation state of the samples were compared to the magnetic susceptibility and magnetic mineralogy. A distinct decrease in magnetic susceptibility is correlated to decreasing oil quality and the amount of extractable organic matter present. Further magnetic characterization revealed that the high quality oils are dominated by pseudo-single domain grains of magnetite and the lower quality oils by larger pseudo-single domain to multidomain grains of magnetite and hematite. Hence, with decreasing oil quality there is a progressive dominance of multidomain magnetite as well as the appearance of hematite. It is concluded that biodegradation is a dual process, firstly, aliphatic hydrocarbons are removed thereby reducing oil quality and secondly, magnetic signatures are both created and destroyed. This complex relationship may explain why controversy has plagued previous attempts to resolve the connection between magnetics and hydrocarbon deposits. These findings reinforce the importance of bacteria within petroleum systems as well as providing a platform for the use of magnetization as a possible exploration tool to identify subsurface reservoirs and a novel proxy of hydrocarbon migration.

  3. Anaerobic biodegradability of dairy wastewater pretreated with porcine pancreas lipase

    OpenAIRE

    2010-01-01

    Lipids-rich wastewater was partial hydrolyzed with porcine pancreas lipase and the efficiency of the enzymatic pretreatment was verified by the comparative biodegradability tests (crude and treated wastewater). Alternatively, simultaneous run was carried out in which hydrolysis and digestion was performed in the same reactor. Wastewater from dairy industries and low cost lipase preparation at two concentrations (0.05 and 0.5% w.v-1) were used. All the samples pretreated with enzyme showed a p...

  4. A biodegradable and biocompatible gecko-inspired tissue adhesive

    OpenAIRE

    Mahdavi, Alborz; Ferreira, Lino; Sundback, Cathryn; Nichol, Jason W.; Chan, Edwin P.; Carter, David J. D.; Bettinger, Chris J.; Patanavanich, Siamrut; Chignozha, Loice; Ben-Joseph, Eli; Galakatos, Alex; Pryor, Howard; Pomerantseva, Irina; Masiakos, Peter T.; Faquin, William

    2008-01-01

    There is a significant medical need for tough biodegradable polymer adhesives that can adapt to or recover from various mechanical deformations while remaining strongly attached to the underlying tissue. We approached this problem by using a polymer poly(glycerol-co-sebacate acrylate) and modifying the surface to mimic the nanotopography of gecko feet, which allows attachment to vertical surfaces. Translation of existing gecko-inspired adhesives for medical applications is complex, as multipl...

  5. Advances in biodegradable nanomaterials for photothermal therapy of cancer

    OpenAIRE

    He, Chao-Feng; Wang, Shun-Hao; Yu, Ying-Jie; Shen, He-Yun; Zhao, Yan; Gao, Hui-Ling; Wang, Hai; Li, Lin-Lin; Liu, Hui-Yu

    2016-01-01

    Photothermal cancer therapy is an alternative to chemotherapy, radiotherapy, and surgery. With the development of nanophotothermal agents, this therapy holds immense potential in clinical translation. However, the toxicity issues derived from the fact that nanomaterials are trapped and retained in the reticuloendothelial systems limit their biomedical application. Developing biodegradable photothermal agents is the most practical route to address these concerns. In addition to the physicochem...

  6. Insights on the biodegradation of acrylic reline resins

    OpenAIRE

    Neves, Maria Cristina Bettencourt, 1976-

    2012-01-01

    Tese de doutoramento, Medicina Dentária (Reabilitação Oral), Universidade de Lisboa, Faculdade de Medicina Dentária, 2012 Acrylic reline resins are extensively used in dentistry, since they readapt dentures to the continuous reabsorbed underlying tissues. Since present in the oral cavity for long periods of time, these materials are objective of the biodegradation phenomena, which represents the change on their chemical, physical and mechanical properties due to the oral environment condit...

  7. Local Delivery of Tobramycin from Injectable Biodegradable Polyurethane Scaffolds

    Science.gov (United States)

    2010-01-01

    tertiary amine catalyst (TEGOAMIN33) from Goldschmidt (Hopewell, VA, USA), poly(ethylene glycol) (PEG, 600 Da) from Alfa Aesar (Ward Hill, MA, USA), and...hardener contained the polyol, 1.5 parts per hundred parts polyol (pphp) water, 4.5 pphp TEGOAMIN33 tertiary amine catalyst , 1.5 pphp sulfated castor oil...Journal of Biomaterials Science 21 (2010) 95–112 brill.nl/jbs Local Delivery of Tobramycin from Injectable Biodegradable Polyurethane Scaffolds

  8. Biodegradation studies of oil sludge containing high hydrocarbons concentration

    Energy Technology Data Exchange (ETDEWEB)

    Olguin-Lora, P.; Munoz-Colunga, A.; Castorena-Cortes, G.; Roldan-Carrillo, T.; Quej Ake, L.; Reyes-Avila, J.; Zapata-Penasco, I.; Marin-Cruz, J.

    2009-07-01

    Oil industry has a significant impact on environment due to the emission of, dust, gases, waste water and solids generated during oil production all the way to basic petrochemical product manufacturing stages. the aim of this work was to evaluate the biodegradation of sludge containing high hydrocarbon concentration originated by a petroleum facility. A sludge sampling was done at the oil residuals pool (ORP) on a gas processing center. (Author)

  9. Development of Biodegradable Zinc Oxide Nanowires Targeting Breast Cancer Metastasis

    Science.gov (United States)

    2013-09-01

    diagnosis, and personalized treatment of cancer. Herein we report the synthesis of green/red fluorescent ZnO nanoplatforms (including both NWs and NPs) and...is to develop a biodegradable ZnO nanomaterial platform (mainly focusing on the nanowire [NW] morphology) for efficient vasculature targeting of BCa...hypothesis is that suitably functionalized ZnO NWs can have long circulation lifetime and efficient tumor targeting for future drug delivery

  10. Anaerobic Biodegradation of Ethylene Glycol within Hydraulic Fracturing Fluid

    Science.gov (United States)

    Heyob, K. M.; Mouser, P. J.

    2014-12-01

    Ethylene glycol (EG) is a commonly used organic additive in hydraulic fracturing fluids used for shale gas recovery. Under aerobic conditions, this compound readily biodegrades to acetate and CO2 or is oxidized through the glycerate pathway. In the absence of oxygen, organisms within genera Desulfovibrio, Acetobacterium, and others can transform EG to acetaldehyde, a flammable and suspected carcinogenic compound. Acetaldehyde can then be enzymatically degraded to ethanol or acetate and CO2. However, little is known on how EG degrades in the presence of other organic additives, particularly under anaerobic conditions representative of deep groundwater aquifers. To better understand the fate and attenuation of glycols within hydraulic fracturing fluids we are assessing their biodegradation potential and pathways in batch anaerobic microcosm treatments. Crushed Berea sandstone was inoculated with groundwater and incubated with either EG or a synthetic fracturing fluid (SFF) containing EG formulations. We tracked changes in dissolved organic carbon (DOC), EG, and its transformation products over several months. Approximately 41% of bulk DOC in SFF is degraded within 21 days, with 58% DOC still remaining after 63 days. By comparison, this same SFF degrades by 70% within 25 days when inoculated with sediment-groundwater microbial communities, suggesting that bulk DOC degradation occurs at a slower rate and to a lesser extent with bedrock. Aerobic biodegradation of EG occurs rapidly (3-7 days); however anaerobic degradation of EG is much slower, requiring several weeks for substantial DOC loss to be observed. Ongoing experiments are tracking the degradation pathways of EG alone and in the presence of SFF, with preliminary data showing incomplete glycol transformation within the complex hydraulic fracturing fluid mixture. This research will help to elucidate rates, processes, and pathways for EG biodegradation and identify key microbial taxa involved in its degradation.

  11. Impact of heavy metals on the oil products biodegradation process.

    Science.gov (United States)

    Zukauskaite, Audrone; Jakubauskaite, Viktorija; Belous, Olga; Ambrazaitiene, Dalia; Stasiskiene, Zaneta

    2008-12-01

    Oil products continue to be used as a principal source of energy. Wide-scale production, transport, global use and disposal of petroleum have made them major contaminants in prevalence and quantity in the environment. In accidental spills, actions are taken to remove or remediate or recover the contaminants immediately, especially if they occur in environmentally sensitive areas, for example, in coastal zones. Traditional methods to cope with oil spills are confined to physical containment. Biological methods can have an advantage over the physical-chemical treatment regimes in removing spills in situ as they offer biodegradation of oil fractions by the micro-organisms. Recently, biological methods have been known to play a significant role in bioremediation of oil-polluted coastal areas. Such systems are likely to be of significance in the effective management of sensitive coastal ecosystems chronically subjected to oil spillage. For this reason the aim of this paper is to present an impact of Mn, Cu, Co and Mo quantities on oil biodegradation effectiveness in coastal soil and to determine the relationship between metal concentrations and degradation of two oil products (black oil and diesel fuel). Soil was collected in the Baltic Sea coastal zone oil products degradation area (Klaipeda, Lithuania). The experiment consisted of two parts: study on the influence of micro-elements on the oil product biodegradation process; and analysis of the influence of metal concentration on the number of HDMs. The analysis performed and results obtained address the following areas: impact of metal on a population of hydrocarbon degrading micro-organisms, impact of metals on residual concentrations of oil products, influence of metals on the growth of micro-organisms, inter-relation of metal concentrations with degradation rates. Statistical analysis was made using ;Statgraphics plus' software. The influence of metals on the growth of micro-organisms, the biodegradation process

  12. Comparison of Biodegradation of Nonylphenol Propoxylates with Usage of Two Different Sources of Activated Sludge.

    Science.gov (United States)

    Zgoła-Grześkowiak, Agnieszka; Grześkowiak, Tomasz; Szymański, Andrzej

    2014-01-01

    Aerobic biodegradation behaviour of nonylphenol propoxylates was investigated in two tests with different sewage sludge as inocula. The samples containing target compounds were pre-concentrated using dispersive liquid-liquid microextraction and analysed with the use of high performance liquid chromatography with tandem mass spectrometry. Both primary biodegradation and formation of different biodegradation by-products were studied. Primary biodegradation of nonylphenol propoxylates was relatively slow and reached only about 70 % in over 70 days from the start of the tests. The biodegradation by-products from both oxidative and non-oxidative pathways were found. In the non-oxidative route, shortening of the propoxy chain was observed. In the oxidative pathway carboxylic acids and ketones were identified. The biodegradation by-products identified with the use of mass spectrometric detection also persisted for many days.

  13. Soil Physical Constraints on Intrinsic Biodegradation of Petroleum Vapors in a Layered Subsurface

    DEFF Research Database (Denmark)

    Kristensen, Andreas Houlberg; Henriksen, Kaj; Mortensen, Lars

    2010-01-01

    Intrinsic biodegradation of organic contaminants in the soil vadose zone depends on site-specific soil properties controlling biophysical and geochemical interactions within the soil pore space. In this study we evaluated the effect of soil texture and moisture conditions on aerobic biodegradation...... in a deep and highly layered vadose zone contaminated with petroleum hydrocarbons. Soil slurry experiments on benzene biodegradation were used for determining the relative potential for hydrocarbon biodegradation in 100 soil samples collected from 2-16 m below ground surface. Regardless of nutrient......-poor and calcareous subsoil conditions, the results showed a significant aerobic biodegradation potential. Average first-order rate constants (k1) ranged from 0 to 5 d-1 and varied significantly across soil types in the order sandy loam > fine sand > limestone. Within samples with high biodegradation potential, soil...

  14. Durability of Starch Based Biodegradable Plastics Reinforced with Manila Hemp Fibers

    Directory of Open Access Journals (Sweden)

    Shinji Ochi

    2011-02-01

    Full Text Available The biodegradability of Manila hemp fiber reinforced biodegradable plastics was studied for 240 days in a natural soil and 30 days in a compost soil. After biodegradability tests, weights were measured and both tensile strength tests and microscopic observation were performed to evaluate the biodegradation behavior of the composites. The results indicate that the tensile strength of the composites displays a sharp decrease for up to five days, followed by a gradual decrease. The weight loss and the reduction in tensile strength of biodegradable composite materials in the compost soil are both significantly greater than those buried in natural soil. The biodegradability of these composites is enhanced along the lower portion because this area is more easily attacked by microorganisms.

  15. Role of nitrification in the biodegradation of selected artificial sweetening agents in biological wastewater treatment process.

    Science.gov (United States)

    Tran, N H; Nguyen, V T; Urase, T; Ngo, H H

    2014-06-01

    The biodegradation of the six artificial sweetening agents including acesulfame (ACE), aspartame (ASP), cyclamate (CYC), neohesperidindihydrochalcone (NHDC), saccharin (SAC), and sucralose (SUC) by nitrifying activated sludge was first examined. Experimental results showed that ASP and NHDC were the most easily degradable compounds even in the control tests. CYC and SAC were efficiently biodegraded by the nitrifying activated sludge, whereas ACE and SUC were poorly removed. However, the biodegradation efficiencies of the ASs were increased with the increase in initial ammonium concentrations in the bioreactors. The association between nitrification and co-metabolic degradation was investigated and a linear relationship between nitrification rate and co-metabolic biodegradation rate was observed for the target artificial sweeteners (ASs). The contribution of heterotrophic microorganisms and autotrophic ammonia oxidizers in biodegradation of the ASs was elucidated, of which autotrophic ammonia oxidizers played an important role in the biodegradation of the ASs, particularly with regards to ACE and SUC.

  16. Polyethylenimine-grafted polycarbonates as biodegradable polycations for gene delivery.

    Science.gov (United States)

    Wang, Chang-Fang; Lin, Yan-Xin; Jiang, Tao; He, Feng; Zhuo, Ren-Xi

    2009-09-01

    Polycations as one of non-viral vectors have gained increasing attentions. In this paper, polyethylenimine(PEI)-grafted polycarbonates (PMAC-g-PEIx) were synthesized as a kind of biodegradable polycations for gene delivery. Backbone polymer, poly(5-methyl-5-allyloxycarbonyl-trimethylene carbonate) (PMAC), was synthesized in bulk catalyzed by immobilized porcine pancreas lipase (IPPL). Then, PMAC-O, the allyl epoxidation product of PMAC, was further modified by PEIx with low molecular weight (x = 423, 800 and 1800). The MWs of PMAC-g-PEIx, measured by GPC-MALLS, were 81,900, 179,900 and 200,600 g/mol with polydispersities of 1.2, 1.4 and 1.7, respectively. PMAC-g-PEIx could form positively charged nano-sized particles (30-90 nm) with pDNA, and all the three PAMC-g-PEIx/DNA polyplexes had similar buffer capabilities. In vitro experiments demonstrated that the PAMC-g-PEIx showed much low cytotoxicity and enhanced transfection efficiency could be found in comparison with PEI25K in 293T cells. Furthermore, pre-incubation of PMAC-g-PEI1800 showed a weakening binding capacity with DNA. The biodegradability of PMAC-g-PEIx can facilitate the efficient release of pDNA from polyplexes and reduce cell cytotoxicity. These results suggested that PMAC-g-PEIx would be a promising non-viral biodegradable vector for gene delivery system.

  17. Bioactive, mechanically favorable, and biodegradable copolymer nanocomposites for orthopedic applications.

    Science.gov (United States)

    Victor, Sunita Prem; Muthu, Jayabalan

    2014-06-01

    We report the synthesis of mechanically favorable, bioactive, and biodegradable copolymer nanocomposites for potential bone applications. The nanocomposites consist of in situ polymerized biodegradable copolyester with hydroxyapatite (HA). Biodegradable copolyesters comprise carboxy terminated poly(propylene fumarate) (CT-PPF) and poly(trimethylol propane fumarate co mannitol sebacate) (TF-Co-MS). Raman spectral imaging clearly reveals a uniform homogenous distribution of HA in the copolymer matrix. The mechanical studies reveal that improved mechanical properties formed when crosslinked with methyl methacrylate (MMA) when compared to N-vinyl pyrrolidone (NVP). The SEM micrographs of the copolymer nanocomposites reveal a serrated structure reflecting higher mechanical strength, good dispersion, and good interfacial bonding of HA in the polymer matrix. In vitro degradation of the copolymer crosslinked with MMA is relatively more than that of NVP and the degradation decreases with an increase in the amount of the HA filler. The mechanically favorable and degradable MMA based nanocomposites also have favorable bioactivity, blood compatibility, cytocompatibility and cell adhesion. The present nanocomposite is a more promising material for orthopedic applications.

  18. Biodegradable and bioabsorbable polymers. Seitai bunkaiter dot kyushu sei kobunshi

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Y. (Kyoto Inst. of Technology, Kyoto (Japan). Faculty of Textile Science)

    1991-08-20

    The relationship between biodegradability with the layout and structure of high polymers which are degraded and disintegrated by the contact with organism is investigated. Description is made also on a new polyurethane which is decomposed by the action of E. Coli. Vinyl polymers formed by carbon-carbon bonding is hard to be made biodegradable with a few exceptions. If the chemical structures are similar, the rates of the decomposition are in the order of crystalline high polymer < glass state high polymer < rubber state high polymer. Bioabsorbable polymers disappear in a short time even implanted in body, and are used ideally as temporary mending materials during the period of body{prime}s self recovery and as the carriers for slow release drugs. Development of biodegradable polymers which can be decomposed by microbes in soil and sea water are expected to be most likely. Non-absorbable degradable polymers which are decomposed, with the decomposed products remaining in body for a long time, can function well in dischargeable portions. 38 refs., 3 tabs.

  19. Assessing impediments to hydrocarbon biodegradation in weathered contaminated soils.

    Science.gov (United States)

    Adetutu, Eric; Weber, John; Aleer, Sam; Dandie, Catherine E; Aburto-Medina, Arturo; Ball, Andrew S; Juhasz, Albert L

    2013-10-15

    In this study, impediments to hydrocarbon biodegradation in contaminated soils were assessed using chemical and molecular methodologies. Two long-term hydrocarbon contaminated soils were utilised which were similar in physico-chemical properties but differed in the extent of hydrocarbon (C10-C40) contamination (S1: 16.5 g kg(-1); S2: 68.9 g kg(-1)). Under enhanced natural attenuation (ENA) conditions, hydrocarbon biodegradation was observed in S1 microcosms (26.4% reduction in C10-C40 hydrocarbons), however, ENA was unable to stimulate degradation in S2. Although eubacterial communities (PCR-DGGE analysis) were similar for both soils, the alkB bacterial community was less diverse in S2 presumably due to impacts associated with elevated hydrocarbons. When hydrocarbon bioaccessibility was assessed using HP-β-CD extraction, large residual concentrations remained in the soil following the extraction procedure. However, when linear regression models were used to predict the endpoints of hydrocarbon degradation, there was no significant difference (P>0.05) between HP-β-CD predicted and microcosm measured biodegradation endpoints. This data suggested that the lack of hydrocarbon degradation in S2 resulted primarily from limited hydrocarbon bioavailability.

  20. (Eco)toxicity and biodegradability of protic ionic liquids.

    Science.gov (United States)

    Oliveira, Maria V S; Vidal, Bruna T; Melo, Claudia M; de Miranda, Rita de C M; Soares, Cleide M F; Coutinho, João A P; Ventura, Sónia P M; Mattedi, Silvana; Lima, Álvaro S

    2016-03-01

    Ionic liquids (ILs) are often claimed to be "environmentally friendly" compounds however, the knowledge of their potential toxicity towards different organisms and trophic levels is still limited, in particular when protic ionic liquids (PILs) are addressed. This study aims to evaluate the toxicity against various microorganisms and the biodegradability of four PILs namely, N-methyl-2-hydroxyethylammonium acetate, m-2-HEAA; N-methyl-2-hydroxyethylammonium propionate, m-2-HEAPr; N-methyl-2-hydroxyethylammonium butyrate, m-2-HEAB; and N-methyl-2-hydroxyethylammonium pentanoate, m-2-HEAP. The antimicrobial activity was determined against the two bacteria, Sthaplylococcus aureus ATCC-6533 and Escherichia coli CCT-0355; the yeast Candida albicans ATCC-76645; and the fungi Fusarium sp. LM03. The toxicity of all PILs was tested against the aquatic luminescent marine bacterium Vibrio fischeri using the Microtox(®) test. The impact of the PILs was also studied regarding their effect on lettuce seeds (Lactuta sativa). The biodegradability of these PILs was evaluated using the ratio between the biochemical oxygen demand (BOD) and the chemical oxygen demand (COD). The results show that, in general, the elongation of the alkyl chain tends to increase the negative impact of the PILs towards the organisms and biological systems under study. According to these results, m-2-HEAA and m-2-HEAP are the less and most toxic PILs studied in this work, respectively. Additionally, all the PILs have demonstrated low biodegradability.

  1. Pharmacokinetics and biodegradation performance of a hydroxypropyl chitosan derivative

    Science.gov (United States)

    Shao, Kai; Han, Baoqin; Dong, Wen; Song, Fulai; Liu, Weizhi; Liu, Wanshun

    2015-10-01

    Hydroxypropyl chitosan (HP-chitosan) has been shown to have promising applications in a wide range of areas due to its biocompatibility, biodegradability and various biological activities, especially in the biomedical and pharmaceutical fields. However, it is not yet known about its pharmacokinetics and biodegradation performance, which are crucial for its clinical applications. In order to lay a foundation for its further applications and exploitations, here we carried out fluorescence intensity and GPC analyses to determine the pharmacokinetics mode of fluorescein isothiocyanate-labeled HP-chitosan (FITC-HP-chitosan) and its biodegradability. The results showed that after intraperitoneal administration at a dose of 10 mg per rat, FITC-HP-chitosan could be absorbed rapidly and distributed to liver, kidney and spleen through blood. It was indicated that FITC-HP-chitosan could be utilized effectively, and 88.47% of the FITC-HP-chitosan could be excreted by urine within 11 days with a molecular weight less than 10 kDa. Moreover, our data indicated that there was an obvious degradation process occurred in liver (hydroxypropyl-modified chitosan as materials in drug delivery, tissue engineering and biomedical area.

  2. Cavitationally induced biodegradability enhancement of a distillery wastewater.

    Science.gov (United States)

    Padoley, K V; Saharan, Virendra Kumar; Mudliar, S N; Pandey, R A; Pandit, Aniruddha B

    2012-06-15

    Hydrodynamic cavitation (HC) was evaluated as a pretreatment option for the complex/recalcitrant biomethanated distillery wastewater (B-DWW). The effect of various process parameters such as inlet pressure, dilution and reaction time on reduction of COD/TOC and enhancement of biodegradability index (BI:BOD(5):COD ratio) of the B-DWW was studied with an aim to maximize the biodegradability index and reducing the toxicity of the distillery wastewater. It was observed that higher operating pressure (13 bar) yielded the maximum BI whereas the lower pressure (5 bar) is suitable for the reduction in the toxicity of B-DWW. The toxicity of the distillery wastewater was analyzed by measuring the COD, TOC and color of the wastewater sample. The HC pretreatment under optimized conditions leads to a BI of 0.32, COD and TOC reduction of 32.24% and 31.43%, respectively along with a color reduction by 48%. These results indicate the potential of HC as a pretreatment option for enhancing the biodegradability index of the recalcitrant wastewater such as B-DWW along with reduced toxicity of wastewater as observed from COD, TOC and color reduction profile under optimized conditions.

  3. Biodegradation of MIB and geosmin with slow sand filters.

    Science.gov (United States)

    Hsieh, Shu-Ting; Lin, Tsair-Fuh; Wang, Gen-Shuh

    2010-01-01

    This study evaluated the biodegradation of MIB (2-methylisoborneol) and geosmin (trans-1,10-dimethyl-trans- 9-decalol) in simulated slow sand filtration (SSF) columns and in batch reactors. The results showed that both MIB and geosmin were biodegradable in the two systems. In batch experiments, the overall removals for MIB and geosmin were 50% and 78%, respectively, after 7 days of contact time. Volatilization loss plays an important role for geosmin in batch systems. Simulated SSF column studies also showed that more than 50% of geosmin and MIB were degraded by the microbial on the sand surface of a slow sand filter. With a filtration rate of 5 m/day, the simulated SSF degraded MIB from 48% to 69% and geosmin from 87% to 96%. The rapid biodegradation of MIB and geosmin in SSF column tests was attributed to the use of filter sands from the SSF unit in the Kinmen water treatment plant, where the microbial had been acclimated to both MIB and geosmin. The results also showed that more than 70% of the geosmin was removed in the top portion of the filter ( approximately 10 cm); while the removal of MIB occurred throughout the entire column depth. The results of this study demonstrated that slow flow through preacclimated sand was effective for control of MIB and geosmin in drinking water.

  4. Biodegradation of Lubricating Oil in Wastewater with Zoogloea sp.

    Institute of Scientific and Technical Information of China (English)

    JIN Liang; WANG Xiao-Juan; GU Zong-Lian; ZHOU De-Zhi; XIE Si-Qin

    2006-01-01

    The purpose of this study was to identify microbial strains that have a strong ability to biodegrade lubricating oil. No.20 lubricating oil was used as the sole carbon source in an isolation medium to screen bacteria from sludge that had been contaminated with crude oil. Through both morphological and biochemical methods, the bacterial strain that had the highest biodegrading capacity was identified as Zoogloea sp. On the basis of these preliminary results, a biological contact oxidation method was employed to further assess the ability of the Zoogloea sp. strain to treat wastewater contaminated by No. 20 lubricating oil using three oxidation cabins and two hydraulic retaining times (HRT). Results showed that the concentration of No. 20 lubricating oil with a 12 h hydraulic retaining time and 16.5 L h-1 inflow rate was reduced by99.3% in 15 d, and with a 6 h hydraulic retaining time and 33 L h-1 inflow rate it decreased by 98.6% in 12 d. The results from this study indicated that Zoogloea sp. had a strong potential to be utilized in biodegradation of lubricating oil.

  5. Study of microbes having potentiality for biodegradation of plastics.

    Science.gov (United States)

    Ghosh, Swapan Kumar; Pal, Sujoy; Ray, Sumanta

    2013-07-01

    Plastic is a broad name given to the different types of organic polymers having high molecular weight and is commonly derived from different petrochemicals. Plastics are generally not biodegradable or few are degradable but in a very slow rate. Day by day, the global demand of these polymers is sharply increasing; however, considering their abundance and potentiality in causing different environmental hazards, there is a great concern in the possible methods of degradation of plastics. Recently, there have been some debates at the world stage about the potential degradation procedures of these synthetic polymers and microbial degradation has emerged as one of the potential alternative ways of degradation of plastics. Alternatively, some scientists have also reported many adverse effects of these polymers in human health, and thus, there is an immediate need of a potential screening of some potential microbes to degrade these synthetic polymers. In this review, we have taken an attempt to accumulate all information regarding the chemical nature along with some potential microbes and their enzymatic nature of biodegradation of plastics along with some key factors that affect their biodegradability.

  6. Microintegrating smooth muscle cells into a biodegradable, elastomeric fiber matrix.

    Science.gov (United States)

    Stankus, John J; Guan, Jianjun; Fujimoto, Kazuro; Wagner, William R

    2006-02-01

    Electrospinning permits fabrication of biodegradable elastomers into matrices that can resemble the scale and mechanical behavior of the native extracellular matrix. However, achieving high-cellular density and infiltration with this technique remains challenging and time consuming. We have overcome this limitation by electrospraying vascular smooth muscle cells (SMCs) concurrently with electrospinning a biodegradable, elastomeric poly(ester urethane)urea (PEUU). Trypan blue staining revealed no significant decrease in cell viability from the fabrication process and electrosprayed SMCs spread and proliferated similar to control unprocessed SMCs. The resulting SMC microintegrated PEUU constructs were cultured under static conditions or transmural perfusion. Higher cell numbers resulted with perfusion culture with 131% and 98% more viable cells versus static culture at days 4 and 7 (pfibers after perfusion culture. SMC microintegrated PEUU was strong, flexible and anisotropic with tensile strengths ranging from 2.0 to 6.5 MPa and breaking strains from 850 to 1,700% dependent on the material axis. The ability to microintegrate smooth muscle or other cell types into a biodegradable elastomer fiber matrix embodies a novel tissue engineering approach that could be applied to fabricate high cell density elastic tissue mimetics, blood vessels or other cardiovascular tissues.

  7. Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements.

    Science.gov (United States)

    Bergmeister, Helga; Seyidova, Nargiz; Schreiber, Catharina; Strobl, Magdalena; Grasl, Christian; Walter, Ingrid; Messner, Barbara; Baudis, Stefan; Fröhlich, Sophie; Marchetti-Deschmann, Martina; Griesser, Markus; di Franco, Matt; Krssak, Martin; Liska, Robert; Schima, Heinrich

    2015-01-01

    Biodegradable vascular grafts with sufficient in vivo performance would be more advantageous than permanent non-degradable prostheses. These constructs would be continuously replaced by host tissue, leading to an endogenous functional implant which would adapt to the need of the patient and exhibit only limited risk of microbiological graft contamination. Adequate biomechanical strength and a wall structure which promotes rapid host remodeling are prerequisites for biodegradable approaches. Current approaches often reveal limited tensile strength and therefore require thicker or reinforced graft walls. In this study we investigated the in vitro and in vivo biocompatibility of thin host-vessel-matched grafts (n=34) formed from hard-block biodegradable thermoplastic polyurethane (TPU). Expanded polytetrafluoroethylene (ePTFE) conduits (n=34) served as control grafts. Grafts were analyzed by various techniques after retrieval at different time points (1 week; 1, 6, 12 months). TPU grafts showed significantly increased endothelial cell proliferation in vitro (Pbiodegradable vascular implant. Degradable grafts showed equivalent long-term performance characteristics compared to the clinically used, non-degradable material with improvements in intimal hyperplasia and ingrowth of host cells.

  8. Biodegradable magnesium wire promotes regeneration of compressed sciatic nerves.

    Science.gov (United States)

    Li, Bo-Han; Yang, Ke; Wang, Xiao

    2016-12-01

    Magnesium (Mg) wire has been shown to be biodegradable and have anti-inflammatory properties. It can induce Schwann cells to secrete nerve growth factor and promote the regeneration of nerve axons after central nervous system injury. We hypothesized that biodegradable Mg wire may enhance compressed peripheral nerve regeneration. A rat acute sciatic nerve compression model was made, and AZ31 Mg wire (3 mm diameter; 8 mm length) bridged at both ends of the nerve. Our results demonstrate that sciatic functional index, nerve growth factor, p75 neurotrophin receptor, and tyrosine receptor kinase A mRNA expression are increased by Mg wire in Mg model. The numbers of cross section nerve fibers and regenerating axons were also increased. Sciatic nerve function was improved and the myelinated axon number was increased in injured sciatic nerve following Mg treatment. Immunofluorescence histopathology showed that there were increased vigorous axonal regeneration and myelin sheath coverage in injured sciatic nerve after Mg treatment. Our findings confirm that biodegradable Mg wire can promote the regeneration of acute compressed sciatic nerves.

  9. Biodegradation study of some food packaging biopolymers based on PVA

    Directory of Open Access Journals (Sweden)

    Elena Elisabeta Tanase

    2016-03-01

    Full Text Available Abstract Polymers are a common choice as protective materials since they combine flexibility, variable sizes and shapes, relatively light weight, stability, resistance to breaking, barrier properties and perceived high-quality image with cost-effectiveness. Currently, mainly non-biodegradable petroleum-based synthetic polymers are used as packaging materials for foods, because of their availability, low cost and functionality. However, biopolymers can be made from renewable resources without the environmental issues of petroleum-based polymers and with the additional advantage of being available from renewable sources or as by-products or waste-products from the food and agriculture industries. The aim of this study was to test some food packaging biopolymers based on PVA. In this respect, some biopolymers for food packaging applications were subjected to biodegradation tests by covering the tested samples with soil. The samples were incubated in known temperature and humidity conditions. The experiment lasted 45 days, after that the samples were washed, weighed and the biodegradation degree was calculated. The obtained results shows that PVA is a promising material for food packaging usage, as it is made from renewable resources and it is environmentally friendly.

  10. Biodegradation of pitch-based high performance carbon fibers

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. (Yamaguchi Univ., Yamaguchi, (Japan). Faculty of Education)

    1992-09-10

    Although carbon fibers are widely used in various purposes because of their excellent mechanical properties, their behavior under biodegradation by microorganisms has not been elucidated. To elucidate the process of biodegradation of carbon fibers is important for understanding thoroughly the durability and the functionality of the fibers. In this article, a study has been made on biodegradation of pitch-based high performance carbon fibers by microorganisms. The fiber which was degraded has been examined with a scanning electron microscope. Aspergillus flavus has broken surface areas of high performance carbon fibers in 60 days and the fibril structure under the surface layer of the fiber has been exfoliated by degradation. The fibrils on the second layer have been 100-110nm wide. The fibrils have been in line nearly parallel to the fiber axis. The above carbon fibers are carbon type, but in case of graphite type high performance carbon fibers, its broken areas have not been shown and they have shown much stronger resistance against microbial attacks. 11 refs., 8 figs., 2 tabs.

  11. Dissolved oxygen imaging to investigate biodegradation at lab scale

    Science.gov (United States)

    Lerner, D. N.; Rees, H.; Huang, W. E.; Smith, C. C.; Oswald, S. E.

    2003-04-01

    A novel combination of a non-invasive imaging method with an oxygen sensitive fluorescent indicator was developed to investigate the biodegradation processes occurring at the fringe of a solute plume. A thin transparent porous matrix was made from quartz plates and quartz sand and acetate was continuously injected in the uniform flow field containing dissolved oxygen. Ruthenium (II)-dichlorotris(1,10-phenanthroline) (Ru(phen)3Cl2), a water soluble fluorescent dye, was used as an indicator of dissolved oxygen concentration as its fluorescence intensity is dependent on the concentration of oxygen. The oxygen distribution within the matrix was interpreted from images recorded by a CCD camera. These two-dimensional experimental results show quantitatively how the oxygen concentrations decrease strongly at the narrow plume fringe and that oxygen was exhausted at the core of the plume. Separately, dispersivity was measured in a series of non-reactive transport experiments, and biodegradation parameters were evaluated by batch experiments. This measurement method provides a novel approach to investigate details of behavior of solute transport and biodegradation in porous media.

  12. Characterization and biodegradation of polycyclic aromatic hydrocarbons in radioactive wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Tikilili, Phumza V. [Water Utilisation Division, Department of Chemical Engineering, University of Pretoria, Pretoria 0002 (South Africa); Nkhalambayausi-Chirwa, Evans M., E-mail: Evans.Chirwa@up.ac.za [Water Utilisation Division, Department of Chemical Engineering, University of Pretoria, Pretoria 0002 (South Africa)

    2011-09-15

    Highlights: {yields} Biodegradation of recalcitrant toxic organics under radioactive conditions. {yields} Biodegradation of PAHs of varying size and complexity in mixed waste streams. {yields} Validation of radiation-tolerance and performance of the isolated organisms. - Abstract: PAH degrading Pseudomonad and Alcaligenes species were isolated from landfill soil and mine drainage in South Africa. The isolated organisms were mildly radiation tolerant and were able to degrade PAHs in simulated nuclear wastewater. The radiation in the simulated wastewater, at 0.677 Bq/{mu}L, was compatible to measured values in wastewater from a local radioisotope manufacturing facility, and was enough to inhibit metabolic activity of known PAH degraders from soil such as Pseudomonas putida GMP-1. The organic constituents in the original radioactive waste stream consisted of the full range of PAHs except fluoranthene. Among the observed PAHs in the nuclear wastewater from the radioisotope manufacturing facility, acenaphthene and chrysene predominated-measured at 25.1 and 14.2 mg/L, respectively. Up to sixteen U.S.EPA priority PAHs were detected at levels higher than allowable limits in drinking water. The biodegradation of the PAHs was limited by the solubility of the compounds. This contributed to the observed faster degradation rates in low molecular weight (LMW) compounds than in high molecular weight compounds.

  13. Application of biotests for the determination of soil ecotoxicity after exposure to biodegradable plastics

    OpenAIRE

    2016-01-01

    Biodegradable plastics are mostly applied in packaging materials (e.g. shopping bags), waste collection bags, catering products, and agricultural applications. In this last case, degradation takes place directly in soil where biodegradable plastic products are intentionally left after use (e.g. mulch films for weeds control). Due to the growing volumes of biodegradable polymers and plastics, interest in their environmental safety is increasing and more research is carried out. Some attempt ha...

  14. Effects of Oxygen on Biodegradation of Fuels in a Corroding Environment

    Science.gov (United States)

    2013-06-12

    known to be more labile than hydrocarbons to anaerobic biodegradation (Aktas, et al, 2010), so the preferential loss of these peaks from the...the contention that hydrocarbon removal was due at least in part to biodegradation by seawater microorganisms. Benzoate, cresols and alkanoic acids...RESPONSIBLE PERSON 19b. TELEPHONE NUMBER (Include area code) · Oxygen Effects on Biodegradation of Fuels in a Corroding Environment Deniz F. Aktas

  15. Permeation measurement of gestodene for some biodegradable materials using Franz diffusion cells

    OpenAIRE

    Liu, Danhua; ZHANG, Chong; Zhang, Xiaowei; Zhen, Zhu; Wang, Ping; Jianxin LI; Yi, Dongxu; Jin, Ying; Yang, Dan

    2015-01-01

    Biodegradable poly(d,l-lactide) (PDLLA), Poly(trimethylene carbonate) (PTMC), polycaprolactone (PCL), poly(caprolactone-co-d,l-lactide) (PCDLLA) and poly(trimethylene carbonate-co-caprolactone) (PTCL) are recently used for clinical drug delivery system such as subcutaneous contraceptive implant capsule due to their biodegradable properties that they could possess long-term stable performance in vivo without removal, however their permeation rate is unknown. In the work, biodegradable material...

  16. Biodegradation of atrazine by Rhodococcus sp. BCH2 to N-isopropylammelide with subsequent assessment of toxicity of biodegraded metabolites.

    Science.gov (United States)

    Kolekar, Parag D; Phugare, Swapnil S; Jadhav, Jyoti P

    2014-02-01

    Atrazine is a persistent organic pollutant in the environment which affects not only terrestrial and aquatic biota but also human health. Since its removal from the environment is needed, atrazine biodegradation is achieved in the present study using the bacterium Rhodococcus sp. BCH2 isolated from soil, long-term treated with atrazine. The bacterium was capable of degrading about 75 % atrazine in liquid medium having pH 7 under aerobic and dark condition within 7 days. The degradation ability of the bacterium at various temperatures (20-60 °C), pH (range 3-11), carbon (glucose, fructose, sucrose, starch, lactose, and maltose), and nitrogen (ammonium molybdate, sodium nitrate, potassium nitrate, and urea) sources were studied for triumph optimum atrazine degradation. The results indicate that atrazine degradation at higher concentrations (100 ppm) was pH and temperature dependent. However, glucose and potassium nitrate were optimum carbon and nitrogen source, respectively. Atrazine biodegradation analysis was carried out by using high-performance thin-layer chromatography (HPTLC), Fourier transform infrared spectroscopy (FTIR), and liquid chromatography quadrupole time-of-flight (LC/Q-TOF-MS) techniques. LC/Q-TOF-MS analysis revealed formation of various intermediate metabolites including hydroxyatrazine, N-isopropylammelide, deisopropylhydroxyatrazine, deethylatrazine, deisopropylatrazine, and deisopropyldeethylatrazine which was helpful to propose biochemical degradation pathway of atrazine. Furthermore, the toxicological studies of atrazine and its biodegraded metabolites were executed on earthworm Eisenia foetida as a model organism with respect to enzymatic (SOD and Catalase) antioxidant defense mechanism and lipid peroxidation studies. These results suggest innocuous degradation of atrazine by Rhodococcus sp. BCH2 in nontoxic form. Therefore the Rhodococcus sp.BCH2 could prove a valuable source for the eco-friendly biodegradation of atrazine pesticide.

  17. Biodegradability of soil water soluble organic carbon extracted from seven different soils

    Institute of Scientific and Technical Information of China (English)

    SCAGLIA Barbara; ADANI Fabrizio

    2009-01-01

    Water soluble organic carbon (WSOC) is considered the most mobile and reactive soil carbon source and its characterization is an important issue for soil ecology study. A biodegradability test was set up to study WSOC extracted from 7 soils differently managed. WSOC was extracted from soil with water (soil/water ratio of 1:2, W/V) for 30 min, and then tested for biodegradability by a liquid state respirometric test. Result obtained confirmed the finding that WSOC biodegradability depended on both land use and management practice. These results suggested the biodegradability test as suitable method to characterize WSOC, adding useful information to soil fertility.

  18. Decomposition of biodegradable films developed on the basis of polyvinyl alcohol in the natural environment

    Directory of Open Access Journals (Sweden)

    Timofiychuk O.A.

    2009-01-01

    Full Text Available The use of polymeric pack has made for many important problems. Biodegradable plastics may provide solutions to global environmental problems. The aim of this study is to examine the utilization possibilities in natural environment of biodegradable films, which was developed with polyvinyl alcohol and organic filler materials (amylum and cellulose. The films stability against the filamentous fungus was analyzed, the soil type with optimal conditions to the biodegradation of polymers was determined; the mold fungi were separated from biodegradable films and were identified to a genus.

  19. The Effect of Tertiary Butyl Hydroquinone on the Biodegradability of Palm Olein

    Directory of Open Access Journals (Sweden)

    Emmanuel ALUYOR

    2009-07-01

    Full Text Available Poor oxidative stability is demonstrated by most vegetable oils especially in industrial situations. Antioxidants are widely used for overcoming poor oxidative stability in vegetable oils. The adverse effect of additives on the overall biodegradability of vegetable oil based industrial fluids could however be a concern. Biodegradability provides an indication of the persistence of any particular substance in the environment. The superior biodegradation of vegetable oils in comparison with mineral based oils has been demonstrated severally, leaving scientists with the lone challenge of finding economic and safe means to improve their working efficiency in terms of their poor oxidative stability. This study investigated the extent to which the use of the antioxidant Tertiary butyl hydroquinone (TBHQ in palm olein impaired biodegradability, and described the relationship between antioxidant loading and biodegradability. Increased antioxidant loading resulted in a matching decrease in biodegradability. Using the total cumulative oxygen depletion value of pure refined palm olein at the end of the 28 day period as a standard of comparison, a 0.02% concentration of TBHQ in palm olein resulted in a 25% loss in biodegradability; a 2% concentration of TBHQ resulted in a 56.5% loss in biodegradability. At 6% TBHQ concentration, no biodegradation was observed in the palm olein sample studied.

  20. Environmental biodegradation of haloarchaea-produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in activated sludge

    DEFF Research Database (Denmark)

    Liu, Xiao-Bin; Wu, Linping; Hou, Jing

    2016-01-01

    Novel poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) copolymers produced by haloarchaea are excellent candidate biomaterials. However, there is no report hitherto focusing on the biodegradation of PHBHV synthesized by haloarchaea. In this study, an environmental biodegradation of haloarchaea......-order copolymer PHBHV-1 (O-PHBHV-1) possessing the highest surface roughness. The order of biodegradation rate was in the opposite trend to the degree of crystallizability of the films. Meanwhile, thermal degradation temperature of most films decreased after biodegradation. Additionally, the surface erosion...

  1. Lab-scale experimental strategy for determining micropollutant partition coefficient and biodegradation constants in activated sludge.

    Science.gov (United States)

    Pomiès, M; Choubert, J M; Wisniewski, C; Miège, C; Budzinski, H; Coquery, M

    2015-03-01

    The nitrifying/denitrifying activated sludge process removes several micropollutants from wastewater by sorption onto sludge and/or biodegradation. The objective of this paper is to propose and evaluate a lab-scale experimental strategy for the determination of partition coefficient and biodegradation constant for micropollutant with an objective of modelling their removal. Four pharmaceutical compounds (ibuprofen, atenolol, diclofenac and fluoxetine) covering a wide hydrophobicity range (log Kow from 0.16 to 4.51) were chosen. Dissolved and particulate concentrations were monitored for 4 days, inside two reactors working under aerobic and anoxic conditions, and under different substrate feed conditions (biodegradable carbon and nitrogen). We determined the mechanisms responsible for the removal of the target compounds: (i) ibuprofen was biodegraded, mainly under aerobic conditions by cometabolism with biodegradable carbon, whereas anoxic conditions suppressed biodegradation; (ii) atenolol was biodegraded under both aerobic and anoxic conditions (with a higher biodegradation rate under aerobic conditions), and cometabolism with biodegradable carbon was the main mechanism; (iii) diclofenac and fluoxetine were removed by sorption only. Finally, the abilities of our strategy were evaluated by testing the suitability of the parameters for simulating effluent concentrations and removal efficiency at a full-scale plant.

  2. Biodegradation of crude oil and origin of thick oil in Liaohe Depression

    Energy Technology Data Exchange (ETDEWEB)

    Lu, S.; Gao, J.; Chen, Y.; Song, S.

    1986-01-01

    The saturated hydrocarbon of crude oil in the Western Depression, Liaohe Basin have been analyzed by computerized GC-MS. The hopanes, regular steranes, diasteranes, specifically, 25-norhopanes were identified. Heavy biodegradation results in destruction of regular steranes and transformation of regular hopanes to 25-norhopanes. Diasteranes and 25-norhopanes survive heavy biodegradation and they can be used as source fingerprints for biodegraded crudes. The existence of the diasteranes and 25-norhopanes in the thick oil shows that the biodegradation plays important part in origin of the thick oil

  3. Changes in Concentration and Distribution of Biomarkers in Biodegraded Oils from Dongying Depression, China.

    Science.gov (United States)

    Chen, Zhonghong; Wang, T-G; Yan, Detian

    2015-10-01

    The alkane fraction of 11 biodegraded oils and five non-biodegraded oils from the Dongying Depression, Bohai Bay Basin, eastern China, were analyzed by gas chromatography-mass spectrometry to investigate the biomarker alteration caused by biodegradation. Results indicated that the concentration of 25-norhopanes was correlated with increased biodegradation. The oil samples showed an increase in the C31 and C32 hopane 22S/(22S + 22R), C29 sterane C2920S/(20S + 20R), and C29ββ/(ββ + αα) thermal maturity parameters in the heavily biodegraded oils. Oleanane was preferentially biodegraded compared with C3017α-hopane, which was preferentially biodegraded compared with C2917α, 21β-norhopane, C30 moretane, and C29 25-norhopane. The selective depletion of C27-C29 steranes followed the order ααα 20R > ααα 20S + αββ 20R > αββ 20S and C27 > C29 > C28, and the diasteranes and C20-C21 steranes were much more resistant to biodegradation than regular C27-C29 steranes. The steranes were generally preferentially biodegraded compared with the hopanes in this study.

  4. Biodegradation of Mexel 432 By Bacteria From the Seine River; Biodegradation du Mexel 432 par des bacteries de la Seine

    Energy Technology Data Exchange (ETDEWEB)

    Allonier, A.S.; Khalanski, M.

    1996-12-31

    This report deals with a study of the biodegradation of a filmogenic organic product (Mexel 432) usable in the fight against corrosion, scale and fouling, presenting a certain interest in the research of processes enabling a functional and environmental efficiency for the cooling systems of thermal power stations. The study of the degradation of this product is followed by a global colorimetric method. It shows that the product is stable on the long-term in demineralized water. On the other hand, its rate of disappearance in river waters is significant (50 % in 2 or 3 days). In this phenomenon of disappearance, biodegradation seems to play a part. Some bacteria from the natural environment (river Seine) have been isolated. Two of them seem to play a significant part, since they can degrade the product in three weeks. During the degradation, the amines with long chains (more than six carbons) of the Mexel, measured by the colorimetric method, disappear. The other compounds generated by the biodegradation process are not identified. (authors). 16 refs.

  5. The peroxidase-mediated biodegradation of petroleum hydrocarbons in a H2O2-induced SBR using in-situ production of peroxidase: Biodegradation experiments and bacterial identification.

    Science.gov (United States)

    Shekoohiyan, Sakine; Moussavi, Gholamreza; Naddafi, Kazem

    2016-08-05

    A bacterial peroxidase-mediated oxidizing process was developed for biodegrading total petroleum hydrocarbons (TPH) in a sequencing batch reactor (SBR). Almost complete biodegradation (>99%) of high TPH concentrations (4g/L) was attained in the bioreactor with a low amount (0.6mM) of H2O2 at a reaction time of 22h. A specific TPH biodegradation rate as high as 44.3mgTPH/gbiomass×h was obtained with this process. The reaction times required for complete biodegradation of TPH concentrations of 1, 2, 3, and 4g/L were 21, 22, 28, and 30h, respectively. The catalytic activity of hydrocarbon catalyzing peroxidase was determined to be 1.48U/mL biomass. The biodegradation of TPH in seawater was similar to that in fresh media (no salt). A mixture of bacteria capable of peroxidase synthesis and hydrocarbon biodegradation including Pseudomonas spp. and Bacillus spp. were identified in the bioreactor. The GC/MS analysis of the effluent indicated that all classes of hydrocarbons could be well-degraded in the H2O2-induced SBR. Accordingly, the peroxidase-mediated process is a promising method for efficiently biodegrading concentrated TPH-laden saline wastewater.

  6. The abundance and distribution of diamondoids in biodegraded oils from the San Joaquin Valley: Implications for biodegradation of diamondoids in petroleum reservoirs

    Science.gov (United States)

    Wei, Z.; Moldowan, J.M.; Peters, K.E.; Wang, Y.; Xiang, W.

    2007-01-01

    The biodegradability of diamondoids was investigated using a collection of crude oil samples from the San Joaquin Valley, California, that had been biodegraded to varying extent in the reservoir. Our results show that diamondoids are subjected to biodegradation, which is selective as well as stepwise. Adamantanes are generally more susceptible to biodegradation than other diamondoids, such as diamantanes and triamantanes. We report a possible pathway for the microbial degradation of adamantane. This cage hydrocarbon possibly breaks down to a metabolic intermediate through the action of microbes at higher levels of biodegradation in petroleum reservoirs. Microbial alteration has only a minor effect on diamondoid abundance in oil at low levels of biodegradation. Our results suggest that most diamondoids (with the exception of adamantane) are resistant to biodegradation, like the polycyclic terpanes (e.g. C19-C24 tricyclic terpanes, hopanes, gammacerane, oleananes, Ts, Tm, C29 Ts), steranes and diasteranes. Microbial alteration of diamondoids has a negligible impact on the quantification of oil cracking achieved using the diamondoid-biomarker method. ?? 2007 Elsevier Ltd. All rights reserved.

  7. Long-term evolution of biodegradation and volatilization rates in a crude oil-contaminated aquifer

    Science.gov (United States)

    Chaplin, B.P.; Delin, G.N.; Baker, R.J.; Lahvis, M.A.

    2002-01-01

    Volatilization and subsequent biodegradation near the water Table make up a coupled natural attenuation pathway that results in significant mass loss of hydrocarbons. Rates of biodegradation and volatilization were documented twice 12 years apart at a crude-oil spill site near Bemidji, Minnesota. Biodegradation rates were determined by calibrating a gas transport model to O2, CO2, and CH4 gas-concentration data in the unsaturated zone. Reaction stoichiometry was assumed in converting O2 and CO2 gas-flux estimates to rates of aerobic biodegradation and CH4 gas-flux estimates to rates of methanogenesis. Model results indicate that the coupled pathway has resulted in significant hydrocarbon mass loss at the site, and it was estimated that approximately 10.52 kg/day were lost in 1985 and 1.99 kg/day in 1997. In 1985 3% of total volatile hydrocarbons diffusing from the floating oil were biodegraded in the lower 1 m of the unsaturated zone and increased to 52% by 1997. Rates of hydrocarbon biodegradation above the center of the floating oil were relatively stable from 1985 to 1997, as the primary metabolic pathway shifted from aerobic to methanogenic biodegradation. Model results indicate that in 1997 biodegradation under methanogenenic conditions represented approximately one-half of total hydrocarbon biodegradation in the lower 1 m of the unsaturated zone. Further downgradient, where substrate concentrations have greatly increased, total biodegradation rates increased by greater than an order of magnitude from 0.04 to 0.43 g/m2-day. It appears that volatilization is the primary mechanism for attenuation in early stages of plume evolution, while biodegradation dominates in later stages.

  8. Deposition and Biodegradation of Submerged Oil from the Deepwater Horizon

    Science.gov (United States)

    Bagby, S. C.; Fisher, G. B.; Reddy, C. M.; Valentine, D. L.

    2014-12-01

    The 2010 sinking of the Deepwater Horizon in the Gulf of Mexico caused the release of ~5 million barrels of oil to the deep ocean. Roughly half of this oil, ~2 million barrels, is believed to have been trapped ~1000-1300 m deep in the water column, in plumes comprising water-soluble hydrocarbons in the aqueous phase and water-insoluble oil particles in suspension. While the soluble fraction was subject to rapid biodegradation, the fate of the oil particles has remained unknown. Using 17α(H),21β(H)-hopane (hopane) as a conservative marker of water-insoluble crude oil, we have examined the sediment data collected in support of the Natural Resource Damage Assessment process and identified a 3200-km2 depositional footprint surrounding the Macondo well. Under conservative assumptions, we estimate that this footprint accounts for ~12% of the suspended liquid oil. Monte Carlo modeling of the distribution of surficial hopane concentrations provides an initial estimate of the size distribution and spatial density of deposited particles, and suggests that the local spatial heterogeneity of particle deposition is likely to be extremely high, such that low-density sediment sampling is unlikely to capture the true extent of deposition. Thus, the 'missing' oil may be hiding in plain sight. Finally, we examined the spatial and temporal concentration distribution of >100 hydrocarbon compounds in relation to hopane, finding that, while there is clear evidence for biodegradation of many compounds, biodegradative efficiency appears to be impeded by high concentrations of oil, perhaps reflecting the low surface area to volume ratio of large oil particles.

  9. Electro-Fenton pretreatment for the improvement of tylosin biodegradability.

    Science.gov (United States)

    Ferrag-Siagh, Fatiha; Fourcade, Florence; Soutrel, Isabelle; Aït-Amar, Hamid; Djelal, Hayet; Amrane, Abdeltif

    2014-01-01

    The feasibility of an electro-Fenton process to treat tylosin (TYL), a non-biodegradable antibiotic, was examined in a discontinuous electrochemical cell with divided cathodic and anodic compartments. Only 15 min electrolysis was needed for total tylosin degradation using a carbon felt cathode and a platinum anode; while 6 h electrolysis was needed to achieve high oxidation and mineralization yields, 96 and 88 % respectively. Biodegradability improvement was shown since BOD₅/COD increased from 0 initially to 0.6 after 6 h electrolysis (for 100 mg L(-1) initial TYL). With the aim of combining electro-Fenton with a biological treatment, an oxidation time in the range 2 to 4 h has been however considered. Results of AOS (average oxidation state) and COD/TOC suggested that the pretreatment could be stopped after 2 h rather than 4 h; while in the same time, the increase of biodegradability between 2 and 4 h suggested that this latter duration seemed more appropriate. In order to conclude, biological cultures have been therefore carried out for various electrolysis times. TYL solutions electrolyzed during 2 and 4 h were then treated with activated sludge during 25 days, showing 57 and 67% total organic carbon (TOC) removal, respectively, namely 77 and 88% overall TOC removal if both processes were considered. Activated sludge cultures appeared, therefore, in agreement with the assessment made from the analysis of physico-chemical parameters (AOS and COD/TOC), since the gain in terms of mineralization expected from increasing electrolysis duration appeared too low to balance the additional energy consumption.

  10. Biodegradation: Updating the Concepts of Control for Microbial Cleanup in Contaminated Aquifers

    DEFF Research Database (Denmark)

    Meckenstock, Rainer U.; Elsner, Martin; Griebler, Christian;

    2015-01-01

    Biodegradation is one of the most favored and sustainable means of removing organic pollutants from contaminated aquifers but the major steering factors are still surprisingly poorly understood. Growing evidence questions some of the established concepts for control of biodegradation. Here, we...

  11. Spatial uncoupling of biodegradation, soil respiration, and PAH concentration in a creosote contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Bengtsson, Goeran, E-mail: goran.bengtsson@ekol.lu.s [Lund University, Department of Ecology, Soelvegatan 37, SE-223 62 Lund (Sweden); Toerneman, Niklas [Lund University, Department of Ecology, Soelvegatan 37, SE-223 62 Lund (Sweden); Yang Xiuhong [Lund University, Department of Ecology, Soelvegatan 37, SE-223 62 Lund (Sweden); Department of Environmental Science, School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275 (China)

    2010-09-15

    Hotspots and coldspots of concentration and biodegradation of polycyclic aromatic hydrocarbons (PAHs) marginally overlapped at the 0.5-100 m scale in a creosote contaminated soil in southern Sweden, suggesting that concentration and biodegradation had little spatial co-variation. Biodegradation was substantial and its spatial variability considerable and highly irregular, but it had no spatial autocorrelation. The soil concentration of PAHs explained only 20-30% of the variance of their biodegradation. Soil respiration was spatially autocorrelated. The spatial uncoupling between biodegradation and soil respiration seemed to be governed by the aging of PAHs in the soil, since biodegradation of added {sup 13}C phenanthrene covaried with both soil respiration and microbial biomass. The latter two were also correlated with high concentrations of phospholipid fatty acids (PLFAs) that are common in gram-negative bacteria. However, several of the hotspots of biodegradation coincided with hotspots for the distribution of a PLFA indicative of fungal biomass. - Hotspots of PAH biodegradation in a creosote contaminated soil do not coincide with hotspots of PAH concentration, microbial biomass and respiration.

  12. Biodegradation of plastics in soil and effects on nitrification activity. A laboratory approach

    Science.gov (United States)

    Bettas Ardisson, Giulia; Tosin, Maurizio; Barbale, Marco; Degli-Innocenti, Francesco

    2014-01-01

    The progressive application of new biodegradable plastics in agriculture calls for improved testing approaches to assure their environmental safety. Full biodegradation (≥90%) prevents accumulation in soil, which is the first tier of testing. The application of specific ecotoxicity tests is the second tier of testing needed to show safety for the soil ecosystem. Soil microbial nitrification is widely used as a bioindicator for evaluating the impact of chemicals on soil but it is not applied for evaluating the impact of biodegradable plastics. In this work the International Standard test for biodegradation of plastics in soil (ISO 17556, 2012) was applied both to measure biodegradation and to prepare soil samples needed for a subsequent nitrification test based on another International Standard (ISO 14238, 2012). The plastic mulch film tested in this work showed full biodegradability and no inhibition of the nitrification potential of the soil in comparison with the controls. The laboratory approach suggested in this Technology Report enables (i) to follow the course of biodegradation, (ii) a strict control of variables and environmental conditions, (iii) the application of very high concentrations of test material (to maximize the possible effects). This testing approach could be taken into consideration in improved testing schemes aimed at defining the biodegradability of plastics in soil. PMID:25566223

  13. High performance nature of biodegradable polymeric nanocomposites for oil-well drilling fluids

    OpenAIRE

    Tarek M. Madkour; Samar Fadl; M.M. Dardir; Mohamed A. Mekewi

    2016-01-01

    Multi-walled carbon nanotube (MWCNT) and graphene nanoplatelet reinforced thermoplastic poly(lactic acid) (PLA) biodegradable nanocomposites were designed and prepared using solution casting techniques. The prepared biodegradable polymers are expected to provide an environmentally friendly alternative to petroleum-based polymers. Both nanocomposite systems exhibited better thermal stability and improved mechanical performance over the unreinforced polymer exhibiting excellent strength and deg...

  14. Repetitive subcutaneous implantation of different types of (biodegradable) biomaterials alters the foreign body reaction

    NARCIS (Netherlands)

    van Luyn, MJA; Plantinga, JA; Brouwer, LA; Khouw, IMSL; de Leij, LFMH; van Wachem, PB

    2001-01-01

    In the present study two biodegradable materials (cross-linked collagens) and two non-biodegradable materials (polyurethane and silicone) were applied in a repetitive subcutaneous implantation model in rats. In contrast to the first challenge, the second challenge with the same type of material, but

  15. Accurate assessment of the biodegradation of cationic surfactants in activated sludge reactors (OECD TG 303A)

    NARCIS (Netherlands)

    Geerts, R.; Ginkel, van C.G.; Plugge, C.M.

    2015-01-01

    The continuous-fed activated sludge test (OECD TG 303A) was used to predict the removal of cationic surfactants from wastewater in activated sludge plants. However, a method to differentiate between adsorption and biodegradation is not provided in these guidelines. Assessment of removal by biodegrad

  16. STUDY ON THE BIODEGRADATION OF CELLULOSE FIBER/BASALTIC FIBER COMPOSITE PAPERBOARD

    Institute of Scientific and Technical Information of China (English)

    LinnaHu; FushanChen; MingxingAi; DekuShang; JunqingCai; JilinCao

    2004-01-01

    Influence factors on the biodegradation of cellulosefiber composite paperboard were studied experimentally and explained theoretically. The results show that the inorganic salts as nutriment added in the soil lixivium, the ratio of C/N, the temperature for biodegradation and content of basaltic fibers in the composite paperboard are the main influence factors.

  17. Toluene biodegradation and biofilm growth in an aerobic fixed-film reactor

    DEFF Research Database (Denmark)

    Arcangeli, Jean-Pierre; Arvin, Erik

    1992-01-01

    Aerobic biodegradation of toluene in a biofilm system was investigated. Toluene is easily biodegradable, like several other aromatic compounds. The degradation was first order at bulk concentrations lower than 0.14 mg/l and zero order above 6–8 mg/l. An average yield coefficient of 1 mg biomass...

  18. STUDY ON THE BIODEGRADATION OF CELLULOSE FIBER/BASALTIC FIBER COMPOSITE PAPERBOARD

    Institute of Scientific and Technical Information of China (English)

    Linna Hu; Fushan Chen; Mingxing Ai; Deku Shang; Junqing Cai; Jilin Cao

    2004-01-01

    Influence factors on the biodegradation of cellulose fiber composite paperboard were studied experimentally and explained theoretically. The results show that the inorganic salts as nutriment added in the soil lixivium, the ratio of C/N, the temperature for biodegradation and content of basaltic fibers in the composite paperboard are the main influence factors.

  19. Biodegradation of plastics in soil and effects on nitrification activity. A laboratory approach.

    Science.gov (United States)

    Bettas Ardisson, Giulia; Tosin, Maurizio; Barbale, Marco; Degli-Innocenti, Francesco

    2014-01-01

    The progressive application of new biodegradable plastics in agriculture calls for improved testing approaches to assure their environmental safety. Full biodegradation (≥90%) prevents accumulation in soil, which is the first tier of testing. The application of specific ecotoxicity tests is the second tier of testing needed to show safety for the soil ecosystem. Soil microbial nitrification is widely used as a bioindicator for evaluating the impact of chemicals on soil but it is not applied for evaluating the impact of biodegradable plastics. In this work the International Standard test for biodegradation of plastics in soil (ISO 17556, 2012) was applied both to measure biodegradation and to prepare soil samples needed for a subsequent nitrification test based on another International Standard (ISO 14238, 2012). The plastic mulch film tested in this work showed full biodegradability and no inhibition of the nitrification potential of the soil in comparison with the controls. The laboratory approach suggested in this Technology Report enables (i) to follow the course of biodegradation, (ii) a strict control of variables and environmental conditions, (iii) the application of very high concentrations of test material (to maximize the possible effects). This testing approach could be taken into consideration in improved testing schemes aimed at defining the biodegradability of plastics in soil.

  20. Biodegradation of plastics in soil and effects on nitrification activity. A laboratory approach.

    Directory of Open Access Journals (Sweden)

    Giulia eBettas Ardisson

    2014-12-01

    Full Text Available The progressive application of new biodegradable plastics in agriculture calls for improved testing approaches to assure their environmental safety. Full biodegradation (≥ 90% prevents accumulation in soil, which is the first tier of testing. The application of specific ecotoxicity tests is the second tier of testing needed to show safety for the soil ecosystem. Soil microbial nitrification is widely used as a bioindicator for evaluating the impact of chemicals on soil but it is not applied for evaluating the impact of biodegradable plastics. In this work the International Standard test for biodegradation of plastics in soil (ISO 17556, 2012 was applied both to measure biodegradation and to prepare soil samples needed for a subsequent nitrification test based on another International Standard (ISO 14238, 2012. The plastic mulch film tested in this work showed full biodegradability and no inhibition of the nitrification potential of the soil in comparison with the controls. The laboratory approach suggested in this Technology Report enables (i to follow the course of biodegradation, (ii a strict control of variables and environmental conditions, (iii the application of very high concentrations of test material (to maximize the possible effects. This testing approach could be taken into consideration in improved testing schemes aimed at defining the biodegradability of plastics in soil.

  1. Biodegradability of injection molded bioplastics containing polylactic acid and poultry feather fiber

    Science.gov (United States)

    Biodegradability of three types of bioplastic pots was evaluated by measuring carbon dioxide (CO2) produced from lab-scale compost reactors containing mixtures of pot fragments and compost inoculum held at 58 C for 60 days. Biodegradability of pot type A (composed of 100% polylactic acid (PLA)) was...

  2. LONG-TERM EVALUATION OF NERVE REGENERATION IN A BIODEGRADABLE NERVE GUIDE

    NARCIS (Netherlands)

    DENDUNNEN, WFA; VANDERLEI, B; SCHAKENRAAD, JM; BLAAUW, EH; STOKROOS, [No Value; PENNINGS, AJ; ROBINSON, PH

    1993-01-01

    Nerve regeneration using artificial biodegradable conduits is of increasing interest. The aim of this study is to evaluate the regeneration and maturation of a nerve after long-term implantation (2 years) of a biodegradable poly-L-lactide/poly-E-caprolactone (PLLA/PCL) copolymeric nerve guide in the

  3. BIODEGRADATIVE ANALYSIS OF MUNICIPAL SOLID WASTE IN LABORATORY-SCALE LANDFILLS

    Science.gov (United States)

    The report gives results of research to characterize the anaerobic biodegradability of the major biodegradable components of municipal solid waste (MSW). Tests were conducted in quadruplicate in 2-L reactors operated to obtain maximum yields. Measured methane (CH4) yields for gra...

  4. IMPACTS OF IRON, NUTRIENTS, AND MINERAL FINES ON ANAEROBIC BIODEGRADATION OF CANOLA OIL IN FRESHWATER SEDIMENTS

    Science.gov (United States)

    Factors affecting anaerobic biodegradation kinetics of canola oil in freshwater sediments were investigated. An optimum dose of ferric hydroxide (10.5 g Fe(III)·kg-1 sediment) was found to stimulate anaerobic biodegradation of canola oil (18.6 g oil kg-1). ...

  5. A new method study biodegradation kinetics of anorganic trace pollutants by activated sludge

    NARCIS (Netherlands)

    Temmink, H.; Klapwijk, A.

    2003-01-01

    A reliable prediction of the behaviour of organic trace compounds in activated sludge plants requires an accurate input of the biodegradation kinetics. Often these kinetics are extrapolated from the results of standardised biodegradation tests. However, these tests generally are not designed to yiel

  6. Decreases in surface activities and aquatic toxicities of linear alkylbenzene sulfonate and alcohol ethoxylates during biodegradation.

    Science.gov (United States)

    Oya, Masaru; Hisano, Noriko

    2010-01-01

    We discussed the relation between aquatic toxicity and interfacial activity during biodegradation with using LAS (Linear Alkylbenzene Sulphonate) and AE (Alcohol Ethoxylate). The change of death rate of Daphnia magna, surface tension, concentration of surfactant, and biodegradation by oxygen demand during biodegradation were measured. As a result, a rapid decrease in toxicity and rapid increase in surface tension were observed within the time before biodegradation based on oxygen demand started to increase. These rapid changes in toxicity and surface tension occurred due to the structural change of surfactant molecules in the primary biodegradation process, which was confirmed by HPLC (High Performance Liquid Chromatography) analysis. We also performed re-addition test to study the effects of acclimatization since it takes an important role on boidegradation, and found that the acclimatization significantly accelerated the primary biodegradation, which were indicated by increase in surface tension and decrease in aquatic toxicity. These results show that the environmental risk of surfactants should be considered not only with the biodegradation based on oxygen demand but also with the decrease of interfacial activity through the primary biodegradation process.

  7. Biodegradation of 2,4- and 2,6-dinitrotoluene by Freshwater Microorganisms

    Science.gov (United States)

    1992-01-01

    for Assessment of Ultimate Biodegradability: Linear Alkylbenzene Sulfonates . AP2. Microbiol. 1977; 30:922-929. 13. Mitchell WR. Biodegradation of...0.98 linearity were rejected. Chemicals Unlabeled 2,4- and 2,6-DNT were purchased from Aldrich Chemical Co., Milwaukee, WI. 14C-uniformly- labeled 2,4

  8. Biodegradation aspects of polycyclic aromatic hydrocarbons (PAHs): a review.

    Science.gov (United States)

    Haritash, A K; Kaushik, C P

    2009-09-30

    PAHs are aromatic hydrocarbons with two or more fused benzene rings with natural as well as anthropogenic sources. They are widely distributed environmental contaminants that have detrimental biological effects, toxicity, mutagenecity and carcinogenicity. Due to their ubiquitous occurrence, recalcitrance, bioaccumulation potential and carcinogenic activity, the PAHs have gathered significant environmental concern. Although PAH may undergo adsorption, volatilization, photolysis, and chemical degradation, microbial degradation is the major degradation process. PAH degradation depends on the environmental conditions, number and type of the microorganisms, nature and chemical structure of the chemical compound being degraded. They are biodegraded/biotransformed into less complex metabolites, and through mineralization into inorganic minerals, H(2)O, CO(2) (aerobic) or CH(4) (anaerobic) and rate of biodegradation depends on pH, temperature, oxygen, microbial population, degree of acclimation, accessibility of nutrients, chemical structure of the compound, cellular transport properties, and chemical partitioning in growth medium. A number of bacterial species are known to degrade PAHs and most of them are isolated from contaminated soil or sediments. Pseudomonas aeruginosa, Pseudomons fluoresens, Mycobacterium spp., Haemophilus spp., Rhodococcus spp., Paenibacillus spp. are some of the commonly studied PAH-degrading bacteria. Lignolytic fungi too have the property of PAH degradation. Phanerochaete chrysosporium, Bjerkandera adusta, and Pleurotus ostreatus are the common PAH-degrading fungi. Enzymes involved in the degradation of PAHs are oxygenase, dehydrogenase and lignolytic enzymes. Fungal lignolytic enzymes are lignin peroxidase, laccase, and manganese peroxidase. They are extracellular and catalyze radical formation by oxidation to destabilize bonds in a molecule. The biodegradation of PAHs has been observed under both aerobic and anaerobic conditions and the rate

  9. Biodegradation aspects of Polycyclic Aromatic Hydrocarbons (PAHs): A review

    Energy Technology Data Exchange (ETDEWEB)

    Haritash, A.K., E-mail: akharitash@gmail.com [Department of Environmental Science and Engineering, Guru Jambheshwar University of Science and Technology, Hisar, Haryana (India); Kaushik, C.P. [Department of Environmental Science and Engineering, Guru Jambheshwar University of Science and Technology, Hisar, Haryana (India)

    2009-09-30

    PAHs are aromatic hydrocarbons with two or more fused benzene rings with natural as well as anthropogenic sources. They are widely distributed environmental contaminants that have detrimental biological effects, toxicity, mutagenecity and carcinogenicity. Due to their ubiquitous occurrence, recalcitrance, bioaccumulation potential and carcinogenic activity, the PAHs have gathered significant environmental concern. Although PAH may undergo adsorption, volatilization, photolysis, and chemical degradation, microbial degradation is the major degradation process. PAH degradation depends on the environmental conditions, number and type of the microorganisms, nature and chemical structure of the chemical compound being degraded. They are biodegraded/biotransformed into less complex metabolites, and through mineralization into inorganic minerals, H{sub 2}O, CO{sub 2} (aerobic) or CH{sub 4} (anaerobic) and rate of biodegradation depends on pH, temperature, oxygen, microbial population, degree of acclimation, accessibility of nutrients, chemical structure of the compound, cellular transport properties, and chemical partitioning in growth medium. A number of bacterial species are known to degrade PAHs and most of them are isolated from contaminated soil or sediments. Pseudomonas aeruginosa, Pseudomons fluoresens, Mycobacterium spp., Haemophilus spp., Rhodococcus spp., Paenibacillus spp. are some of the commonly studied PAH-degrading bacteria. Lignolytic fungi too have the property of PAH degradation. Phanerochaete chrysosporium, Bjerkandera adusta, and Pleurotus ostreatus are the common PAH-degrading fungi. Enzymes involved in the degradation of PAHs are oxygenase, dehydrogenase and lignolytic enzymes. Fungal lignolytic enzymes are lignin peroxidase, laccase, and manganese peroxidase. They are extracellular and catalyze radical formation by oxidation to destabilize bonds in a molecule. The biodegradation of PAHs has been observed under both aerobic and anaerobic conditions

  10. BIODEGRADATION OF [bmim][PF6] USING Fusarium sp

    OpenAIRE

    A. Esquivel-Viveros; F. Ponce-Vargas; P. Esponda-Aguilar; L.A. Prado-Barragán; M. Gutiérrez-Rojas; Lye, G.J.; S. Huerta-Ochoa

    2009-01-01

    The increased use of ionic liquids in industry has led to the study of their biodegradability and toxicity to preventcontamination of the environment by these synthetic compounds. A Fusarium strain was isolated and tested for its ability to tolerate and grow in the presence of [bmim] [PF6], a potential contaminant of wastewaters. The Fusarium strain was able to grow in both surface and submerged liquid media using [bmim] [PF6] as the sole carbon source up to 19 and 21 g [bmim] [PF6] L-1, resp...

  11. Biodegradation of DTP and PET Fiber by Microbe

    Institute of Scientific and Technical Information of China (English)

    张健飞; 王晓春; 巩继贤; 顾振亚

    2003-01-01

    The degradation of diethylene glycol terephthalate (DTP) and polyethylene terephthalate (PET) fiber by microbe was studied.The degree of DTP degradation was determined by High Performance Liquid Chromatography (HPLC) to be more than 90%.The products after degradation of DTP and PET fiber were various.The degradation of DTP can be described by the first-order reaction model.The degradation of PET fiber was found to be little,but surface erosion of PET fiber could be clearly seen from the SEM photographs indicating there occurred some traces of biodegradation on the PET fiber surface.

  12. APPLICATION OF A BIODEGRADABLE MATERIAL FOR BONE REPLACEMENT IN TRAUMATOLOGY

    Directory of Open Access Journals (Sweden)

    T. V. Druzhinina

    2014-01-01

    Full Text Available 20 men (medium age (31.5 ± 13.5 years were studied. All patients underwent arthroscopic auditing plastic anterior cruciate ligament of the knee. Osteoregeneration dynamics were determined by biochemical testing of blood serum and X-ray computed tomography (CT of the fracture in 1–4 months after surgery. As a result, an estimation of the bone tissue reparative regeneration according to CT data in 10 patients with a defect of the patella, treated with the material is provided. The obtained results of the clinical study indicate the reparative effect of the biodegradable material for bone replacing on bone regeneration

  13. Processing and characterization of novel biobased and biodegradable materials

    Science.gov (United States)

    Pilla, Srikanth

    Human society has benefited tremendously from the use of petroleum-based plastics. However, there are growing concerns with their adverse environmental impacts and volatile costs attributed to the skyrocketing oil prices. Additionally most of the petroleum-based polymers are non-biodegradable causing problems about their disposal. Thus, during the last couple of decades, scientists ail over the world have been focusing on developing new polymeric materials that are biobased and biodegradable, also termed as green plastics . This study aims to develop green materials based on polylactide (PLA) biopolymer that can be made from plants. Although PLA can provide important advantages in terms of sustainability and biodegradability, it has its own challenges such as high cost, brittleness, and narrow processing window. These challenges are addressed in this study by investigating both new material formulations and processes. To improve the material properties and control the material costs, PLA was blended with various fillers and modifiers. The types of fillers investigated include carbon nanotube (CNT) nanoparticles and various natural fibers such as pine-wood four, recycled-wood fibers and flax fiber. Using natural fibers as fillers for PLA can result in fully biodegradable and eco-friendly biocomposites. Also due to PLA's sensitivity to moisture and temperature, molecular degradation can occur during processing leading to inferior material properties. To address this issue, one of the approaches adopted by this study was to incorporate a multifunctional chain-extender into PLA, which increased the molecular weight of PLA thereby improving the material properties. To improve the processability and reduce the material cost, both microcellular injection molding and extrusion processes have been studied. The microcellular technology allows the materials to be processed at a lower temperature, which is attractive for thermo- and moisture-sensitive materials like PLA. They

  14. Biocompatibility and Structural Features of Biodegradable Polymer Scaffolds.

    Science.gov (United States)

    Nasonova, M V; Glushkova, T V; Borisov, V V; Velikanova, E A; Burago, A Yu; Kudryavtseva, Yu A

    2015-11-01

    We performed a comparative analysis of physicochemical properties and biocompatibility of scaffolds of different composition on the basis of biodegradable polymers fabricated by casting and electrospinning methods. For production of polyhydroxyalkanoate-based scaffolds by electrospinning method, the optimal concentration of the polymer was 8-10%. Fiber diameter and properties of the scaffold produced by electrospinning method depended on polymer composition. Addition of polycaprolactone increased elasticity of the scaffolds. Bio- and hemocompatibility of the scaffolds largely depended on the composition formulation and method of scaffold fabrication. Polylactide introduced into the composition of polyhydroxybutyrate-oxyvalerate scaffolds accelerated degradation and increased adhesive properties of the scaffolds.

  15. Biodegradable Polymer-Based Scaffolds for Bone Tissue Engineering

    CERN Document Server

    Sultana, Naznin

    2013-01-01

    This book addresses the principles, methods and applications of biodegradable polymer based scaffolds for bone tissue engineering. The general principle of bone tissue engineering is reviewed and the traditional and novel scaffolding materials, their properties and scaffold fabrication techniques are explored. By acting as temporary synthetic extracellular matrices for cell accommodation, proliferation, and differentiation, scaffolds play a pivotal role in tissue engineering. This book does not only provide the comprehensive summary of the current trends in scaffolding design but also presents the new trends and directions for scaffold development for the ever expanding tissue engineering applications.

  16. Issues in long-term protein delivery using biodegradable microparticles.

    Science.gov (United States)

    Ye, Mingli; Kim, Sungwon; Park, Kinam

    2010-09-01

    Recently, a variety of bioactive protein drugs have been available in large quantities as a result of advances in biotechnology. Such availability has prompted development of long-term protein delivery systems. Biodegradable microparticulate systems have been used widely for controlled release of protein drugs for days and months. The most widely used biodegradable polymer has been poly(d,l-lactic-co-glycolic acid) (PLGA). Protein-containing microparticles are usually prepared by the water/oil/water (W/O/W) double emulsion method, and variations of this method, such as solid/oil/water (S/O/W) and water/oil/oil (W/O/O), have also been used. Other methods of preparation include spray drying, ultrasonic atomization, and electrospray methods. The important factors in developing biodegradable microparticles for protein drug delivery are protein release profile (including burst release, duration of release, and extent of release), microparticle size, protein loading, encapsulation efficiency, and bioactivity of the released protein. Many studies used albumin as a model protein, and thus, the bioactivity of the release protein has not been examined. Other studies which utilized enzymes, insulin, erythropoietin, and growth factors have suggested that the right formulation to preserve bioactivity of the loaded protein drug during the processing and storage steps is important. The protein release profiles from various microparticle formulations can be classified into four distinct categories (Types A, B, C, and D). The categories are based on the magnitude of burst release, the extent of protein release, and the protein release kinetics followed by the burst release. The protein loading (i.e., the total amount of protein loaded divided by the total weight of microparticles) in various microparticles is 6.7+/-4.6%, and it ranges from 0.5% to 20.0%. Development of clinically successful long-term protein delivery systems based on biodegradable microparticles requires

  17. Straightforward biodegradable nanoparticle generation through megahertz-order ultrasonic atomization

    Science.gov (United States)

    Forde, Gareth; Friend, James; Williamson, Tom

    2006-08-01

    Simple and reliable formation of biodegradable nanoparticles formed from poly-ɛ-caprolactone was achieved using 1.645MHz piston atomization of a source fluid of 0.5% w/v of the polymer dissolved in acetone; the particles were allowed to descend under gravity in air 8cm into a 1mM solution of sodium dodecyl sulfate. After centrifugation to remove surface agglomerations, a symmetric monodisperse distribution of particles ϕ 186nm (SD =5.7, n =6) was obtained with a yield of 65.2%.

  18. Biodegradation of azo dyes by genetically engineered azoreductase

    Institute of Scientific and Technical Information of China (English)

    WANG Jing; YAN Bin; ZHOU Ji-ti; BAO Yong-ming; LU Hong; YUAN Xiao-dong

    2005-01-01

    A azoreductase gene with 537 bp was obtained by PGR amplification from Rhodobacter sphaeroides AS1.1737. The enzyme,with a molecular weight of 18.7 kD, was efficiently expressed in Escherichia coli and its biodegradation characteristics for azo dyes were investigated. Furthermore, the reaction kinetics and mechanism of azo dyes catalyzed by the genetically engineered azoreductase were studied in detail. The presence of a hydrazo-intermediate was identified, which provided a convincing evidence for the assumption that azo dyes were degraded via an incomplete reduction stage.

  19. Encapsulation of indomethacin in magnetic biodegradable polymer nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Zavisova, Vlasta [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Kosice (Slovakia)]. E-mail: zavisova@saske.sk; Koneracka, Martina [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Kosice (Slovakia); Strbak, Oliver [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Kosice (Slovakia); Tomasovicova, Natalia [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Kosice (Slovakia); Kopcansky, Peter [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Kosice (Slovakia); Timko, Milan [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Kosice (Slovakia); Vavra, Ivo [Institute of Electrical Engineering, Slovak Academy of Science, Dubravska cesta 9, 841 04 Bratislava (Slovakia)

    2007-04-15

    In this study, indomethacin (IND), which is a poorly water-soluble anti-inflammatory drug, was encapsulated in magnetic biodegradable poly(D,L-lactide) polymer (PLA) by the nanoprecipitation method. The influence of aqueous phase pH on drug loading and maximum concentration of magnetic particles inside the polymer was investigated. Morphology and particle size of the prepared nanospheres were determined by atomic force microscopy and transmission electron microscopy. Drug release from the nanospheres was studied by external sink method. The diffusion and dissolution models were applied to the description of IND release from nanospheres.

  20. BIODEGRADATION OF PETROLEUM-WASTE BY BIOSURFACTANT-PRODUCING BACTERIA

    Energy Technology Data Exchange (ETDEWEB)

    Brigmon, R; Grazyna A. Plaza, G; Kamlesh Jangid, K; Krystyna Lukasik, K; Grzegorz Nalecz-Jawecki, G; Topher Berry, T

    2007-05-16

    The degradation of petroleum waste by mixed bacterial cultures which produce biosurfactants: Ralstonia pickettii SRS (BP-20), Alcaligenes piechaudii SRS (CZOR L-1B), Bacillus subtilis (1'- 1a), Bacillus sp. (T-1) and Bacillus sp. (T'-1) was investigated. The total petroleum hydrocarbons were degraded substantially (91 %) by the mixed bacterial culture in 30 days (reaching up to 29 % in the first 72 h). Similarly, the toxicity of the biodegraded petroleum waste decreased 3 times after 30 days as compared to raw petroleum waste. Thus, the mixed bacterial strains effectively clean-up the petroleum waste and they can be used in other bioremediation processes.

  1. 3D structuring of biocompatible and biodegradable polymers via stereolithography.

    Science.gov (United States)

    Gill, Andrew A; Claeyssens, Frederik

    2011-01-01

    The production of user-defined 3D microstructures from biocompatible and biodegradable materials via free-form fabrication is an important step to create off-the-shelf technologies to be used as tissue engineering scaffolds. One method of achieving this is the microstereolithography of block copolymers, allowing high resolution microstructuring of materials with tuneable physical properties. A versatile protocol for the production and photofunctionalisation of pre-polymers for microstereolithography is presented along with a discussion of the possible microstereolithography set-ups and previous work in the field.

  2. Status seminar: rapidly biodegradable lubricants and working agents; Statusseminar: Biologisch schnell abbaubare Schmier- und Verfahrensstoffe. Guelzower Fachgespraeche

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Lubricants and hydraulic fluids based on vegetable oils have many advantages over mineral oils. They are biodegradable, have excellent tribological, wear and lubricating properties. The topics of the status seminar were: field test with biodegradable hydraulic fluids, chemical modification, additives, wear resistance, tribology. Examples of biodegradable oils were sunflower oil, rape oil and sunthetic esters.

  3. Comparison of the efficacy of biodegradable and non-biodegradable scintillation liquids on the counting of tritium- and [14C]-labeled compounds

    Directory of Open Access Journals (Sweden)

    Medeiros R.B.

    2003-01-01

    Full Text Available The widespread use of ³H and 14C in research has generated a large volume of waste mixed with scintillation liquid, requiring an effective control and appropriate storage of liquid radioactive waste. In the present study, we compared the efficacy of three commercially available scintillation liquids, Optiphase HiSafe 3, Ultima-Gold(TM AB (biodegradable and Insta-Gel-XF (non-biodegradable, in terms of [14C]-glucose and [³H]-thymidine counting efficiency. We also analyzed the effect of the relative amount of water (1.6 to 50%, radioisotope concentration (0.1 to 100 nCi/ml, pH (2 to 10 and color of the solutions (samples containing 0.1 to 1.0 mg/ml of Trypan blue on the counting efficiency in the presence of these scintillation liquids. There were few significant differences in the efficiency of 14C and ³H counting obtained with biodegradable or non-biodegradable scintillation liquids. However, there was an 83 and 94% reduction in the efficiency of 14C and ³H counting, respectively, in samples colored with 1 mg/ml Trypan blue, but not with 0.1 mg/ml, independent of the scintillation liquid used. Considering the low cost of biodegradable scintillation cocktails and their efficacy, these results show that traditional hazardous scintillation fluids may be replaced with the new safe biodegradable fluids without impairment of ³H and 14C counting efficiency. The use of biodegradable scintillation cocktails minimizes both human and environmental exposure to hazardous solvents. In addition, some biodegradable scintillation liquids can be 40% less expensive than the traditional hazardous cocktails.

  4. Effect of steam explosion on biodegradation of lignin in wheat straw.

    Science.gov (United States)

    Zhang, Lian-Hui; Li, Dong; Wang, Li-Jun; Wang, Ti-Peng; Zhang, Lu; Chen, Xiao Dong; Mao, Zhi-Huai

    2008-11-01

    The effect of steam explosion pretreatment on biodegradation of lignin in wheat straw was studied in this paper. Through experiments and analysis, 0.8MPa operation pressure and 1:20 wheat straw to water ratio are optimum for destroying lignin and the maximum of lignin loss rate is 19.94%. After steam explosion pretreatment, the wheat straw was retted by Trametes versicolor for 40 days. Biodegradation rate of lignin was tested and the maximum of 55.40% lignin loss rate was found on day 30. During the whole process of both steam explosion pretreatment and biodegradation, 75.34% lignin was degraded, without steam explosion the biodegradation of raw material the degradation rate of lignin was 31.23% only. FT-IR spectroscopy, TGA and SEM were used for further validating the results of biodegradation.

  5. Biodegradation of marine surface floating crude oil in a large-scale field simulated experiment.

    Science.gov (United States)

    Bao, Mutai; Sun, Peiyan; Yang, Xiaofei; Wang, Xinping; Wang, Lina; Cao, Lixin; Li, Fujuan

    2014-08-01

    Biodegradation of marine surface floating crude oil with hydrocarbon degrading bacteria, rhamnolipid biosurfactants, and nutrients was carried out by a large-scale field simulated experiment in this paper. After a 103 day experiment, for n-alkanes, the maximum biodegradation rate reached 71% and the results showed hydrocarbon degrading bacteria, rhamnolipid biosurfactants, and nutrients have a comprehensive effect. It also showed that rhamnolipid biosurfactants could shorten the biodegradation time through an emulsifying function; the nutrients could greatly increase the biodegradation rate by promoting HDB production. For PAHs, the chrysene series had higher weathering resistance. For the same series, the weathering resistance ability is C1- biodegradation was found for different n-alkanes in two pools which only had added rhamnolipid biosurfactants or nutrients, respectively. Except for C14, C15 and C16 sesquiterpanes, most of the steranes and terpanes had high antibiodegradability.

  6. A numerical investigation of oxygen concentration dependence on biodegradation rate laws in vapor intrusion.

    Science.gov (United States)

    Yao, Yijun; Shen, Rui; Pennel, Kelly G; Suuberg, Eric M

    2013-12-01

    In subsurface vapor intrusion, aerobic biodegradation has been considered as a major environmental factor that determines the soil gas concentration attenuation factors for contaminants such as petroleum hydrocarbons. The site investigation has shown that oxygen can play an important role in this biodegradation rate, and this paper explores the influence of oxygen concentration on biodegradation reactions included in vapor intrusion (VI) models. Two different three dimensional (3-D) numerical models of vapor intrusion were explored for their sensitivity to the form of the biodegradation rate law. A second order biodegradation rate law, explicitly including oxygen concentration dependence, was introduced into one model. The results indicate that the aerobic/anoxic interface depth is determined by the ratio of contaminant source vapor to atmospheric oxygen concentration, and that the contaminant concentration profile in the aerobic zone was significantly influenced by the choice of rate law.

  7. Impact of glycerin and lignosulfonate on biodegradation of high explosives in soil

    Science.gov (United States)

    Won, Jongho; Borden, Robert C.

    2016-11-01

    Soil microcosms were constructed and monitored to evaluate the impact of substrate addition and transient aerobic and anaerobic conditions on TNT, RDX and HMX biodegradation in grenade range soils. While TNT was rapidly biodegraded under both aerobic and anaerobic conditions with and without organic substrate, substantial biodegradation of RDX, HMX, and RDX daughter products was not observed under aerobic conditions. However, RDX and HMX were significantly biodegraded under anaerobic conditions, without accumulation of TNT or RDX daughter products (2-ADNT, 4-ADNT, MNX, DNX, and TNX). In separate microcosms containing grenade range soil, glycerin and lignosulfonate addition enhanced oxygen consumption, increasing the consumption rate > 200% compared to untreated soils. Mathematical model simulations indicate that oxygen consumption rates of 5 to 20 g/m3/d can be achieved with reasonable amendment loading rates. These results indicate that glycerin and lignosulfonate can be potentially used to stimulate RDX and HMX biodegradation by increasing oxygen consumption rates in soil.

  8. Cylindrospermopsin Biodegradation Abilities of Aeromonas sp. Isolated from Rusałka Lake.

    Science.gov (United States)

    Dziga, Dariusz; Kokocinski, Mikolaj; Maksylewicz, Anna; Czaja-Prokop, Urszula; Barylski, Jakub

    2016-02-25

    The occurrence of the cyanobacterial toxin cylindrospermopsin (CYN) in freshwater reservoirs is a common phenomenon. However, the biodegradation of this toxin in environmental samples has been observed only occasionally. In this work the biodegradation ability of cylindrospermopsin was investigated based on isolates from lakes with previous cyanotoxin history. Bacterial strains were identified based on the 16S rDNA and rpoD gene comparison. CYN biodegradation was monitored using the HPLC method. The R6 strain identified as Aeromonas sp. was documented as being capable of CYN removal. This biodegradation was dependent on the pH and temperature. Additionally, the stimulation of the growth of the R6 strain in the presence of CYN was indicated. Our discovery supports the hypothesis that (in analogy to the well-known phenomenon of microcystin biodegradation) in lakes dominated by potential CYN-producing cyanobacteria, the processes of microbial utilization of this toxin may occur.

  9. Effect of biostimulation on biodegradation of dissolved organic carbon in biological granular activated carbon filters

    Directory of Open Access Journals (Sweden)

    K. Tihomirova

    2012-03-01

    Full Text Available The addition of labile organic carbon (LOC to enhance the biodegradation rate of dissolved organic carbon (DOC in biological columns was studied. Acetate standard solution (NaAc and LB (Luria Bertrani medium were used as LOC as biostimulants in glass column system used for measurements of biodegradable dissolved organic carbon (BDOC. The addition of LOC related with the increase of total DOC in sample. The concentration of BDOC increased up to 7 and 5 times and was utilized after 24 min. contact time. The biodegradation rate constant was increased at least 8 times during adaptation-biostimulation period. There was a strong positive correlation between the biodegradation rate constant and the concentration of BDOC. Biostimulation period ranged from 24 to 53 h for NaAc biostimulant and from 20 to 168 h for LB. The study has shown that LOC could be used as stimulator to enhance the biodegradation rate of DOC during biofiltration.

  10. Effect of biostimulation on biodegradation of dissolved organic carbon in biological filters

    Directory of Open Access Journals (Sweden)

    K. Tihomirova

    2012-07-01

    Full Text Available The addition of labile organic carbon (LOC to enhance the biodegradation rate of dissolved organic carbon (DOC in biological columns was studied. Acetate standard solution (NaAc and Luria Bertrani (LB medium were used as LOC as biostimulants in glass column system used for measurements of biodegradable dissolved organic carbon (BDOC. The addition of LOC related with the increase of total DOC in sample. The concentration of BDOC increased up to 7 and 5 times and was utilized after 24 min. contact time. The biodegradation rate constant was increased at least 26 times during adaptation-biostimulation period. There was a strong positive correlation between the biodegradation rate constant and the concentration of BDOC. Biostimulation period ranged from 24 to 53 h for NaAc biostimulant and from 20 to 168 h for LB. The study has shown that LOC could be used as stimulator to enhance the biodegradation rate of DOC during biofiltration.

  11. Anoxic biodegradation of petroleum hydrocarbons in saline media using denitrifier biogranules.

    Science.gov (United States)

    Moussavi, Gholamreza; Shekoohiyan, Sakine; Naddafi, Kazem

    2016-07-01

    The total petroleum hydrocarbons (TPH) biodegradation was examined using biogranules at different initial TPH concentration and contact time under anoxic condition in saline media. The circular compact biogranules having the average diameter between 2 and 3mm were composed of a dense population of Bacillus spp. capable of biodegrading TPH under anoxic condition in saline media were formed in first step of the study. The biogranules could biodegrade over 99% of the TPH at initial concentration up to 2g/L at the contact time of 22h under anoxic condition in saline media. The maximum TPH biodegradation rate of 2.6 gTPH/gbiomass.d could be obtained at initial TPH concentration of 10g/L. Accordingly, the anoxic biogranulation is a possible and promising technique for high-rate biodegradation of petroleum hydrocarbons in saline media.

  12. A critical comparison of respirometric biodegradation tests based on OECD 301 and related test methods.

    Science.gov (United States)

    Reuschenbach, Peter; Pagga, Udo; Strotmann, Uwe

    2003-04-01

    Biodegradation studies of organic compounds in the aquatic environment gain important information for the final fate of chemicals in the environment. A decisive role play tests for ready biodegradability (OECD 301) and in this context, the respirometric test (OECD 301F). Two different respirometric systems (Oxitop and Sapromat) were compared and in two of ten cases (diethylene glycol and 2-ethylhexylacrylate) differences were observed indicating that the test systems are not always equivalent. For 2-ethylhexylacrylate and cyclohexanone we could not state differences in the extent of biodegradation with a municipal and industrial inoculum whereas for cyclohexanone the degradation rate was faster with a municipal inoculum. Allylthiourea (ATU) proved to be an effective inhibitor of nitrification processes and did not affect the heterotrophic biodegradation activity. Modelling of biodegradation processes could be successfully performed with a first-order and a modified logistic plot.

  13. Biodegradation of Decabromodiphenyl Ether (BDE-209 by Crude Enzyme Extract from Pseudomonas aeruginosa

    Directory of Open Access Journals (Sweden)

    Yu Liu

    2015-09-01

    Full Text Available The biodegradation effect and mechanism of decabromodiphenyl ether (BDE-209 by crude enzyme extract from Pseudomonas aeruginosa were investigated. The results demonstrated that crude enzyme extract exhibited obviously higher degradation efficiency and shorter biodegradation time than Pseudomonas aeruginosa itself. Under the optimum conditions of pH 9.0, 35 °C and protein content of 2000 mg/L, 92.77% of the initial BDE-209 (20 mg/L was degraded after 5 h. A BDE-209 biodegradation pathway was proposed on the basis of the biodegradation products identified by GC-MS analysis. The biodegradation mechanism showed that crude enzyme extract degraded BDE-209 into lower brominated PBDEs and OH-PBDEs through debromination and hydroxylation of the aromatic rings.

  14. Biodegradability of poly(lactic-co-glycolic acid) after femtosecond laser irradiation

    Science.gov (United States)

    Shibata, Akimichi; Yada, Shuhei; Terakawa, Mitsuhiro

    2016-06-01

    Biodegradation is a key property for biodegradable polymer-based tissue scaffolds because it can provide suitable space for cell growth as well as tailored sustainability depending on their role. Ultrashort pulsed lasers have been widely used for the precise processing of optically transparent materials, including biodegradable polymers. Here, we demonstrated the change in the biodegradation of a poly(lactic-co-glycolic acid) (PLGA) following irradiation with femtosecond laser pulses at different wavelengths. Microscopic observation as well as water absorption and mass change measurement revealed that the biodegradation of the PLGA varied significantly depending on the laser wavelength. There was a significant acceleration of the degradation rate upon 400 nm-laser irradiation, whereas 800 nm-laser irradiation did not induce a comparable degree of change. The X-ray photoelectron spectroscopy analysis indicated that laser pulses at the shorter wavelength dissociated the chemical bonds effectively, resulting in a higher degradation rate at an early stage of degradation.

  15. Biodegradability of injection molded bioplastic pots containing polylactic acid and poultry feather fiber.

    Science.gov (United States)

    Ahn, H K; Huda, M S; Smith, M C; Mulbry, W; Schmidt, W F; Reeves, J B

    2011-04-01

    The biodegradability of three types of bioplastic pots was evaluated by measuring carbon dioxide produced from lab-scale compost reactors containing mixtures of pot fragments and compost inoculum held at 58 °C for 60 days. Biodegradability of pot type A (composed of 100% polylactic acid (PLA)) was very low (13 ± 3%) compared to literature values for other PLA materials. Near infrared spectroscopy (NIRS) results suggest that the PLA undergoes chemical structural changes during polymer extrusion and injection molding. These changes may be the basis of the low biodegradability value. Biodegradability of pot types B (containing 5% poultry feather, 80% PLA, 15% starch), and C (containing 50% poultry feather, 25% urea, 25% glycerol), were 53 ± 2% and 39 ± 3%, respectively. More than 85% of the total biodegradation of these bioplastics occurred within 38 days. NIRS results revealed that poultry feather was not degraded during composting.

  16. Biodegradable stents for the treatment of bowel strictures in Crohn's disease

    DEFF Research Database (Denmark)

    Karstensen, John Gásdal; Christensen, Katrine Risager; Brynskov, Jørn

    2016-01-01

    BACKGROUND AND STUDY AIMS: In patients with Crohn's disease, the idea of biodegradable stents for treatment of bowel strictures with limited effect of endoscopic balloon dilation is tempting and initial results have been promising. The aim of this study was to evaluate the technical and clinical...... success of biodegradable stents for treatment of inflamed Crohn's strictures refractory to endoscopic balloon dilatation. PATIENTS AND METHODS: Consecutive patients treated with biodegradable stents due to Crohn's disease and inflamed bowel strictures refractory to endoscopic balloon dilatation were...... collapse (n = 1). CONCLUSIONS: In Crohn's disease, it is technically feasible to treat bowel strictures with biodegradable stents. However, we have stopped using biodegradable stents due to lack of clinical success and side effects such as mucosal overgrowth and stent collapse....

  17. Development of novel biodegradable Au nanocomposite hydrogels based on wheat: for inactivation of bacteria.

    Science.gov (United States)

    Jayaramudu, Tippabattini; Raghavendra, Gownolla Malegowd; Varaprasad, Kokkarachedu; Sadiku, Rotimi; Raju, Konduru Mohana

    2013-02-15

    The design and fabrication of novel biodegradable gold nanocomposites hydrogels were developed as antibacterial agent. Biodegradable gold nanocomposite hydrogels were developed by using acrylamide (AM) and wheat protein isolate (WPI). The gold nanoparticles were prepared as a gold colloid by reducing HAuCl(4)·XH(2)O with leaf extracts of Azadirachta indica (neem leaf) that formed hydrogel network. The characterization of developed biodegradable hydrogels were studied using fourier transforms infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and transmission electron microscopy (TEM). The biodegradable gold nanoparticle composite hydrogels developed were tested for antibacterial properties. The results indicate that these biodegradable gold nanocomposite hydrogels can be used as potential candidates for antibacterial applications.

  18. Fabrication of pliable biodegradable polymer foams to engineer soft tissues.

    Science.gov (United States)

    Wake, M C; Gupta, P K; Mikos, A G

    1996-01-01

    We have fabricated pliable, porous, biodegradable scaffolds with poly(lactic-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG) blends using a solvent-casting and particulate-leaching technique. Our study investigated the effects of four different processing parameters on pliability and pore morphology of the biodegradable scaffolds. The parameters investigated were the PLGA copolymer ratio, the PLGA/PEG blend ratio, the initial salt weight fraction, and the salt particle size. A wide range of shear moduli (0.59 to 9.55 MPa), porosities (0.798 to 0.942), and median pore diameters (71 to 154 microns) was able to be achieved by varying the combination of these parameters. Our study indicates that initial salt weight fraction and PLGA/PEG blend ratio have the most significant effects on the physico-mechanical properties of the scaffolds. Enhanced pliability of the three dimensional foams made with blends of PLGA and PEG is evidenced by the ability to roll them into a tube without macroscopic damage to the scaffold. Pliable polymer substrates hold great promise for regeneration of soft tissues such as skin, or those requiring a tubular conformation such as intestine or vascular grafts.

  19. Solubilization and biodegradation of polycyclic aromatic hydrocarbons in microemulsions

    Energy Technology Data Exchange (ETDEWEB)

    Wong, J.W.C.; Zhao, Z.Y.; Yang, J.; Wong, S.Y. [Hong Kong Baptist Univ., Hong Kong (China). Sino-Forest Applied Research Centre for Pearl River Delta Environment, Dept. of Biology

    2009-07-01

    This study investigated the feasibility of using microemulsions to enhance the biodegradation of polycyclic aromatic hydrocarbons (PAHs). Microemulsions are commonly used in soil washing as a means of enhancing the solubility of hydrophobic pollutants. The microemulsions were composed of Tween-80, 1-pentanol and linseed oil. Phenanthrene (PHE) was dissolved in dichloromethane and added to a glass vial. Microemulsions were added separately to the vials. A high performance liquid chromatograph (HPLC) was used to determine PHE concentrations. The vials were inoculated with an isolated PAH degradative bacterium Bacillus subtilis B-UM. Soil collected from abandoned shipyards in Hong Kong were then spiked with the mixtures and aged for 3 months. One way analysis of variance (ANOVA) analyses were conducted. Results of the study showed that a microemulsion composed of 0.4 Tween-80, 0.1 per cent 1-pentanol, and 0.05 linseed oil effectively enhanced the biodegradation of PHE in the aqueous phase. It was concluded that microemulsions can be used to remediate soils contaminated by PAHs. 26 refs., 2 tabs., 4 figs.

  20. Dissolved oxygen saturation controls PAH biodegradation in freshwater estuary sediments.

    Science.gov (United States)

    Boyd, T J; Montgomery, M T; Steele, J K; Pohlman, J W; Reatherford, S R; Spargo, B J; Smith, D C

    2005-02-01

    Polycyclic aromatic hydrocarbons (PAHs) are common contaminants in terrestrial and aquatic environments and can represent a significant constituent of the carbon pool in coastal sediments. We report here the results of an 18-month seasonal study of PAH biodegradation and heterotrophic bacterial production and their controlling biogeochemical factors from 186 sediment samples taken in a tidally influenced freshwater estuary. For each sampling event, measurements were averaged from 25-45 stations covering approximately 250 km(2). There was a clear relationship between bacterial production and ambient temperature, but none between production and bottom water dissolved oxygen (DO) % saturation or PAH concentrations. In contrast with other studies, we found no effect of temperature on the biodegradation of naphthalene, phenanthrene, or fluoranthene. PAH mineralization correlated with bottom water DO saturation above 70% (r(2) > 0.99). These results suggest that the proportional utilization of PAH carbon to natural organic carbon is as much as three orders of magnitude higher during cooler months, when water temperatures are lower and DO % saturation is higher. Infusion of cooler, well-oxygenated water to the water column overlying contaminated sediments during the summer months may stimulate PAH metabolism preferentially over non-PAH organic matter.

  1. Methanogenic biodegradation of two-ringed polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Berdugo-Clavijo, Carolina; Dong, Xiaoli; Soh, Jung; Sensen, Christoph W; Gieg, Lisa M

    2012-07-01

    Polycyclic aromatic hydrocarbons (PAH) are widespread in methane-rich subsurface environments, such as oil reservoirs and fuel-contaminated aquifers; however, little is known about the biodegradation of these compounds under methanogenic conditions. To assess the metabolism of PAH in the absence of electron acceptors, a crude oil-degrading methanogenic enrichment culture was tested for the ability to biodegrade naphthalene, 1-methylnaphthalene (1-MN), 2-methylnaphthalene (2-MN), and 2, 6-dimethylnaphthalene (2, 6-diMN). When methane was measured as an indicator of metabolism, nearly 400 μmol of methane was produced in the 2-MN- and 2, 6-diMN-amended cultures relative to substrate-unamended controls, which is close to the amount of methane stoichiometrically predicted based on the amount of substrate added (51-56 μmol). In contrast, no substantial methane was produced in the naphthalene- and 1-MN-amended enrichments. In time course experiments, metabolite analysis of enrichments containing 2-MN and 2, 6-diMN revealed the formation of 2-naphthoic acid and 6-methyl-2-naphthoic acid, respectively. Microbial community analysis by 454 pyrosequencing revealed that these PAH-utilizing enrichments were dominated by archaeal members most closely affiliated with Methanosaeta and Methanoculleus species and bacterial members most closely related to the Clostridiaceae, suggesting that these organisms play an important role in the methanogenic metabolism of the substituted naphthalenes in these cultures.

  2. Resonant infrared pulsed laser deposition of thin biodegradable polymer films

    DEFF Research Database (Denmark)

    Bubb, D.M.; Toftmann, B.; Haglund Jr., R.F.

    2002-01-01

    Thin films of the biodegradable polymer poly(DL-lactide-co-glycolide) (PLGA) were deposited using resonant infrared pulsed laser deposition (RIR-PLD). The output of a free-electron laser was focused onto a solid target of the polymer, and the films were deposited using 2.90 (resonant with O-H str...... absorbance spectrum of the films is nearly identical with that of the native polymer, the average molecular weight of the films is a little less than half that of the starting material. Potential strategies for defeating this mass change are discussed.......Thin films of the biodegradable polymer poly(DL-lactide-co-glycolide) (PLGA) were deposited using resonant infrared pulsed laser deposition (RIR-PLD). The output of a free-electron laser was focused onto a solid target of the polymer, and the films were deposited using 2.90 (resonant with O......-H stretch) and 3.40 (C-H) mum light at macropulse fluences of 7.8 and 6.7 J/cm(2), respectively. Under these conditions, a 0.5-mum thick film can be grown in less than 5 min. Film structure was determined from infrared absorbance measurements and gel permeation chromatography (GPC). While the infrared...

  3. Biodegradation of polyethylene microplastics by the marine fungus Zalerion maritimum.

    Science.gov (United States)

    Paço, Ana; Duarte, Kátia; da Costa, João P; Santos, Patrícia S M; Pereira, R; Pereira, M E; Freitas, Ana C; Duarte, Armando C; Rocha-Santos, Teresa A P

    2017-05-15

    Plastic yearly production has surpassed the 300milliontons mark and recycling has all but failed in constituting a viable solution for the disposal of plastic waste. As these materials continue to accumulate in the environment, namely, in rivers and oceans, in the form of macro-, meso-, micro- and nanoplastics, it becomes of the utmost urgency to find new ways to curtail this environmental threat. Multiple efforts have been made to identify and isolate microorganisms capable of utilizing synthetic polymers and recent results point towards the viability of a solution for this problem based on the biodegradation of plastics resorting to selected microbial strains. Herein, the response of the fungus Zalerion maritimum to different times of exposition to polyethylene (PE) pellets, in a minimum growth medium, was evaluated, based on the quantified mass differences in both the fungus and the microplastic pellets used. Additionally, molecular changes were assessed through attenuated total reflectance Fourier transform Infrared Spectroscopy (FTIR-ATR) and Nuclear Magnetic Resonance (NMR). Results showed that, under the tested conditions, Z. maritimum is capable of utilizing PE, resulting in the decrease, in both mass and size, of the pellets. These results indicate that this naturally occurring fungus may actively contribute to the biodegradation of microplastics, requiring minimum nutrients.

  4. Role for acetotrophic methanogens in methanogenic biodegradation of vinyl chloride

    Science.gov (United States)

    Bradley, P.M.; Chapelle, F.H.

    1999-01-01

    Under methanogenic conditions, stream-bed sediment microorganisms rapidly degraded [1,2-14C]vinyl chloride to 14CH4 and 14CO2. Amendment with 2-bromoethanesulfonic acid eliminated 14CH4 production and decreased 14CO2 recovery by an equal molar amount. Results obtained with [14C]ethene, [14C]acetate, or 14CO2 as substrates indicated that acetotrophic methanogens were responsible for the production of 14CH4 during biodegradation of [1,2-14C]VC.Under methanogenic conditions, stream-bed sediment microorganisms rapidly degraded [1,2-14C]vinyl chloride to 14CH4 and 14CO2. Amendment with 2-bromoethanesulfonic acid eliminated 14CH4 production and decreased 14CO2 recovery by an equal molar amount. Results obtained with [14C]-ethene, [14C]acetate, or 14CO2 as substrates indicated that acetotrophic methanogens were responsible for the production of 14CH4, during biodegradation of [1,2-14C]VC.

  5. Remediation of groundwater contaminated with DNAPLs by biodegradable oil emulsion.

    Science.gov (United States)

    Lee, Young-Chul; Kwon, Tae-Soon; Yang, Jung-Seok; Yang, Ji-Won

    2007-02-01

    Emulsion-based remediation with biodegradable vegetable oils was investigated as an alternative technology for the treatment of subsurface DNAPLs (dense non-aqueous phase liquids) such as TCE (trichloroethylene) and PCE (perchloroethylene). Corn and olive oil emulsions obtained by homogenization at 8000rpm for 15min were used. The emulsion droplets prepared with corn and olive oil gave a similar size distribution (1-10microm) and almost all of initially injected oil, >90%, remained in a dispersed state. In batch experiments, 2% (v/v) oil emulsion could adsorb up to 11,000ppm of TCE or 18,000ppm of PCE without creating a free phase. Results of one-dimensional column flushing studies indicated that contaminants with high aqueous solubility could be efficiently removed by flushing with vegetable oil emulsions. Removal efficiencies exceeded 98% for TCE and PCE with both corn and olive oil emulsions. The results of this study show that flushing with biodegradable oil emulsion can be used for the remediation of groundwater contaminated by DNAPLs.

  6. Linking desorption kinetics to phenanthrene biodegradation in soil

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, Angela H.; McAllister, Laura E. [Lancaster Environment Centre, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Semple, Kirk T., E-mail: k.semple@lancaster.ac.u [Lancaster Environment Centre, Lancaster University, Lancaster LA1 4YQ (United Kingdom)

    2010-05-15

    The desorption of polycyclic aromatic hydrocarbons (PAHs) often exhibits a biphasic profile similar to that observed for biodegradation whereby an initial rapid phase of degradation or desorption is followed by a phase of much slower transformation or release. Most investigations to-date have utilised a polymeric sorbent, such as Tenax, to characterise desorption, which is methodologically unsuitable for the analysis of soil. In this study, desorption kinetics of {sup 14}C-phenanthrene were measured by consecutive extraction using aqueous solutions of hydroxypropyl-beta-cyclodextrin (HPCD). The data indicate that the fraction extracted after 24 h generally approximated the linearly sorbed, rapidly desorbing fraction (F{sub rap}), calculated using a three-compartment model. A good linear correlation between phenanthrene mineralised and F{sub rap} was observed (r{sup 2} = 0.89; gradient = 0.85; intercept = 8.20). Hence HPCD extraction (24 h) and first-order three-compartment modelling appear to provide an operationally straightforward tool for estimating mass-transfer limited biodegradation in soil. - Aqueous hydroxypropyl-beta-cyclodextrin (HPCD) solutions can predict the rapidly desorbing and microbially degradable fractions of phenanthrene in soils.

  7. Formaldehyde biodegradation and its effect on the denitrification process.

    Science.gov (United States)

    Eiroa, M; Vilar, A; Kennes, C; Veiga, M C

    2007-09-01

    Simultaneous formaldehyde biodegradation and denitrification in batch assays and in a continuous lab-scale reactor were studied. In batch assays, initial biodegradation rates between 0.7 and 3.3 g CKH2O g VSS(-1) d(-1) were obtained at formaldehyde concentrations between 300 and 2150 mg l(-1). The denitrification process was affected by the presence of formaldehyde. The nitrite accumulation increased with the initial formaldehyde concentration. In the continuous reactor, removal efficiencies above 98.5% were obtained at formaldehyde loading rates between 0.37 and 2.96 kg COD m(-3) d(-1) (625-5000 mg CH2O l(-1)). Formaldehyde removal led to the appearance of methanol and formic acid in the medium. Denitrification process was almost complete (around 99.7%) at nitrogen loading rates up to 0.44 kg N-NO3- m(-3) d(-1). Nitrite occasionally appeared in the effluent at concentrations less than 2.9 mg l(-1). The composition of the biogas indicated that denitrification and methanogenesis occurred simultaneously in the same unit.

  8. Biodegradability of selected highly energetic pollutants under aerobic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Jones, A.M.; Greer, C.W.; Hawari, J. [National Research Council of Canada, Montreal, Quebec (Canada). Biotechnology Research Inst.; Ampleman, G. [Defence Research Establishment Valcartier, Courcelette, Quebec (Canada). Div. des Materiaux Energetiques; Lavigne, J. [Canadian Embassy, Washington, DC (United States)

    1995-12-31

    Laboratory studies were conducted to assess the biodegradation potential of four energetic compounds--1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), 2,4,6-trinitrotoluene (TNT), glycidyl azide polymer (GAP), and nitrocellulose (NC)--under aerobic conditions. Soils contaminated with energetic compounds were screened for microorganisms able to degrade these compounds. Rhodococcus sp. strain A was enriched and purified from RDX-contaminated soil by its ability to use RDX as sole source of nitrogen. Using [{sup 14}C]-labeled RDX, its ability to mineralize RDX to CO{sub 2} in pure culture under aerobic conditions was verified. Bioaugmentation of RDX-contaminated soil with this bacterium enhanced the rate and extent of biodegradation. Although TNT is a more toxic and recalcitrant pollutant, concentration-dependent [{sup 14}C]TNT mineralization activity was detected in TNT-contaminated soil. A Pseudomonas sp., enriched from this soil, was able to extensively transform TNT to partially reduced amine metabolites in axenic liquid culture. In contrast to these isolates, which utilized RDX and TNT as sources of nitrogen, soil consortia developed from soils exhibiting [{sup 14}C]GAP and [{sup 14}C]NC mineralization activities used GAP and NC as sole carbon sources for growth.

  9. Biodegradable polyurethane nanocomposites containing dexamethasone for ocular route

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues da Silva, Gisele [Federal University of Sao Joao Del Rei, School of Pharmacy, Divinopolis, Minas Gerais (Brazil); Silva-Cunha, Armando da [Federal University of Minas Gerais, School of Pharmacy, Belo Horizonte, Minas Gerais (Brazil); Behar-Cohen, Francine [INSERM, Physiopathology of ocular diseases: Therapeutic innovations, Institut des Cordeliers, Paris (France); Laboratoire d' Innovations Therapeutiques, Fondation Rothschild, Paris (France); Universite Rene Descartes, Hotel Dieu University Hospital, Paris (France); Ayres, Eliane [Federal University of Minas Gerais, Department of Metallurgical and Materials Engineering, Belo Horizonte, Minas Gerais (Brazil); Orefice, Rodrigo L., E-mail: rorefice@demet.ufmg.br [Federal University of Minas Gerais, Department of Metallurgical and Materials Engineering, Belo Horizonte, Minas Gerais (Brazil)

    2011-03-12

    The treatment of posterior segment ocular diseases, such as uveitis, by using eye drops and oral drugs is usually not effective due to the body's natural barriers to drug penetration. In this study, ocular implants to treat uveitis were synthesized by incorporating dexamethasone acetate, an important type of corticoid used in the treatment of some uveitis, into a biodegradable polyurethane containi clay nanoparticles. Biodegradable polyurethane nanocomposites having poly(caprolactone) oligomers as soft segments were obtained by delaminating clay particles within a polyurethane aqueous dispersion. The drug was incorporated into the polymer by dispersing it in the waterborne polyurethane followed by a drying step. Nanoparticles derived from clay were demonstrated to be able to tailor the mechanical properties of polyurethanes to achieve values that can match the properties of ocular soft tissues. Infrared spectra (FTIR) showed that the presence of clay particles was able to change the microphase separation process typical of polyurethanes. X-ray diffraction and small angle x-ray scattering (SAXS) results were explored to show that the incorporation of both dexamethasone acetate and nanocomponents derived from clay led to a less defined two-phase polyurethane. The presence of clay nanoparticles increased the rate of drug release measured in vitro. Human retinal pigment epithelial cells (ARPE-19) were cultured in contact with polyurethanes and polyurethane nanocomposites, and the viability of them (evaluated by using MTT assay after 7 days) showed that no toxic components were released from polyurethanes containing no drugs during the test.

  10. Dimethylamine biodegradation by mixed culture enriched from drinking water biofilter.

    Science.gov (United States)

    Liao, Xiaobin; Chen, Chao; Zhang, Jingxu; Dai, Yu; Zhang, Xiaojian; Xie, Shuguang

    2015-01-01

    Dimethylamine (DMA) is one of the important precursors of drinking water disinfection by-product N-nitrosodimethylamine (NDMA). Reduction of DMA to minimize the formation of carcinogenic NDMA in drinking water is of practical importance. Biodegradation plays a major role in elimination of DMA pollution in the environment, yet information on DMA removal by drinking water biofilter is still lacking. In this study, microcosms with different treatments were constructed to investigate the potential of DMA removal by a mixed culture enriched from a drinking water biofilter and the effects of carbon and nitrogen sources. DMA could be quickly mineralized by the enrichment culture. Amendment of a carbon source, instead of a nitrogen source, had a profound impact on DMA removal. A shift in bacterial community structure was observed with DMA biodegradation, affected by carbon and nitrogen sources. Proteobacteria was the predominant phylum group in DMA-degrading microcosms. Microorganisms from a variety of bacterial genera might be responsible for the rapid DMA mineralization.

  11. Banana fiber-reinforced biodegradable soy protein composites

    Institute of Scientific and Technical Information of China (English)

    Rakesh Kumar; Veena Choudhary; Saroj Mishra; Ik Varma

    2008-01-01

    Banana fiber,a waste product of banana cultivation,has been used to prepare banana fiber reinforced soy protein composites. Alkali modified banana fibers were characterized in terms of density,denier and crystallinity index. Fourier transformed infrared spectroscopy (FTIR),scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were also performed on the fibers. Soy protein composites were prepared by incorporating different volume fractions of alkali,treated and untreated fibers into soy protein isolate (SPI) with different amounts of glycerol (25%,50%) as plasticizer.Composites thus prepared were characterized in terms of mechanical properties,SEM and water resistance.The results indicate that at 0.3 volume fraction,tensile strength and modulus of alkali treated fiber reinforced soy protein composites increased to 82% and 963%,respectively,compared to soy protein film without fibers.Water resistance of the composites increased significantly with the addition of glutaraldehyde which acts as crosslinking agent. Biodegradability of the composites has also been tested in the contaminated environment and the composites were found to be 100% biodegradable.

  12. Biodegradation of nitroglycerin from propellant residues on military training ranges.

    Science.gov (United States)

    Bordeleau, Geneviève; Martel, Richard; Drouin, Mathieu; Ampleman, Guy; Thiboutot, Sonia

    2014-03-01

    Nitroglycerin (NG) is often present in soils and sometimes in pore water at antitank firing positions due to incomplete combustion of propellants. Various degradation processes can contribute to the natural attenuation of NG in soils and pore water, thus reducing the risks of groundwater contamination. However, until now these processes have been sparsely documented. This study aimed at evaluating the ability of microorganisms from a legacy firing position to degrade dissolved NG, as well as NG trapped within propellant particles. Results from the shake-flask experiments showed that the isolated culture is capable of degrading dissolved NG but not the nitrocellulose matrix of propellant particles, so that the deeply embedded NG molecules cannot be degraded. Furthermore, the results from column experiments showed that in a nutrient-poor sand, degradation of dissolved NG may not be sufficiently rapid to prevent groundwater contamination. Therefore, the results from this study indicate that, under favorable soil conditions, biodegradation can be an important natural attenuation process for NG dissolving out of fresh propellant residues. In contrast, biodegradation does not contribute to the long-term attenuation of NG within old, weathered propellant residues. Although NG in these old residues no longer poses a threat to groundwater quality, if soil clean-up of a legacy site is required, active remediation approaches should be sought.

  13. Biodegradation of petroleum hydrocarbons in estuarine sediments: metal influence.

    Science.gov (United States)

    Almeida, Raquel; Mucha, Ana P; Teixeira, Catarina; Bordalo, Adriano A; Almeida, C Marisa R

    2013-02-01

    In this work, the potential effect of metals, such as Cd, Cu and Pb, on the biodegradation of petroleum hydrocarbons in estuarine sediments was investigated under laboratory conditions. Sandy and muddy non-vegetated sediments were collected in the Lima River estuary (NW Portugal) and spiked with crude oil and each of the metals. Spiked sediments were left in the dark under constant shaking for 15 days, after which crude oil biodegradation was evaluated. To estimate microbial abundance, total cell counts were obtained by DAPI staining and microbial community structure was characterized by ARISA. Culturable hydrocarbon degraders were determined using a modified most probable number protocol. Total petroleum hydrocarbons concentrations were analysed by Fourier Transform Infrared Spectroscopy after their extraction by sonication, and metal contents were determined by atomic absorption spectrometry. The results obtained showed that microbial communities had the potential to degrade petroleum hydrocarbons, with a maximum of 32 % degradation obtained for sandy sediments. Both crude oil and metals changed the microbial community structure, being the higher effect observed for Cu. Also, among the studied metals, only Cu displayed measurable deleterious effect on the hydrocarbons degradation process, as shown by a decrease in the hydrocarbon degrading microorganisms abundance and in the hydrocarbon degradation rates. Both degradation potential and metal influence varied with sediment characteristics probably due to differences in contaminant bioavailability, a feature that should be taken into account in developing bioremediation strategies for co-contaminated estuarine sites.

  14. Physicochemical treatments of anionic surfactants wastewater: Effect on aerobic biodegradability.

    Science.gov (United States)

    Aloui, Fathi; Kchaou, Sonia; Sayadi, Sami

    2009-05-15

    The effect of different physicochemical treatments on the aerobic biodegradability of an industrial wastewater resulting from a cosmetic industry has been investigated. This industrial wastewater contains 11423 and 3148mgL(-1) of chemical oxygen demand (COD) and anionic surfactants, respectively. The concentration of COD and anionic surfactants were followed throughout the diverse physicochemical treatments and biodegradation experiments. Different pretreatments of this industrial wastewater using chemical flocculation process with lime and aluminium sulphate (alum), and also advanced oxidation process (electro-coagulation (Fe and Al) and electro-Fenton) led to important COD and anionic surfactants removals. The best results were obtained using electro-Fenton process, exceeding 98 and 80% of anionic surfactants and COD removals, respectively. The biological treatment by an isolated strain Citrobacter braakii of the surfactant wastewater, as well as the pretreated wastewater by the various physicochemical processes used in this study showed that the best results were obtained with electro-Fenton pretreated wastewater. The characterization of the treated surfactant wastewater by the integrated process (electro-coagulation or electro-Fenton)-biological showed that it respects Tunisian discharge standards.

  15. Biodegradable polyoxyethylenated pentaerythritol quaternary esters as oil spill dispersants

    Energy Technology Data Exchange (ETDEWEB)

    El-Sayed Abdel-Raouf, Manar [Egyptian Petroleum Research Institute, Cairo (Egypt). Petroleum Application Dept.

    2012-03-15

    Four polyoxyethylenated pentaerythritol (PE) ester surfactants have been synthesized. The molecular weights of these surfactants were calculated and evaluated experimentally by GPC and confirmed by calculations based on {sup 1}H-NMR. Also, their HLB values were calculated by Griffin formula. The surface tension and thermodynamic properties of the surfactants were obtained from surface tension measurements at different temperatures (298-318 K). It was found that the minimum area/surfactant molecule (A{sub min}) for the investigated surfactants increased with increasing the molecular weight of the incorporated ethylene oxide. The thermodynamic parameters of micellization ({delta}G{sub mic,} {delta}H{sub mic} and {delta}S{sub mic}) and that for adsorption ({delta}G{sub ad,} {delta}H{sub ad} and {delta}S{sub ad}) were also calculated. The more negative Gibbs free energy of adsorption values than those of micellization suggest that these surfactants favor adsorption than micellization. This finding is utilized for monitoring their dispersancy power. It was found that the water solubility of the prepared surfactants is correlated to their HLB values. Furthermore, the biodegradability of the prepared compounds was studied at different conditions in order to investigate their usability as oil spill dispersants. The data revealed that PE200-C12 had maximum dispersion efficiency and it was completely biodegraded after 8 days. (orig.)

  16. Biodegradation of Aromatic Hydrocarbons in an Extremely Acidic Environment

    Science.gov (United States)

    Stapleton, Raymond D.; Savage, Dwayne C.; Sayler, Gary S.; Stacey, Gary

    1998-01-01

    The potential for biodegradation of aromatic hydrocarbons was evaluated in soil samples recovered along gradients of both contaminant levels and pH values existing downstream of a long-term coal pile storage basin. pH values for areas greatly impacted by runoff from the storage basin were 2.0. Even at such a reduced pH, the indigenous microbial community was metabolically active, showing the ability to oxidize more than 40% of the parent hydrocarbons, naphthalene and toluene, to carbon dioxide and water. Treatment of the soil samples with cycloheximide inhibited mineralization of the aromatic substrates. DNA hybridization analysis indicated that whole-community nucleic acids recovered from these samples did not hybridize with genes, such as nahA, nahG, nahH, todC1C2, and tomA, that encode common enzymes from neutrophilic bacteria. Since these data suggested that the degradation of aromatic compounds may involve a microbial consortium instead of individual acidophilic bacteria, experiments using microorganisms isolated from these samples were initiated. While no defined mixed cultures were able to evolve 14CO2 from labeled substrates in these mineralization experiments, an undefined mixed culture including a fungus, a yeast, and several bacteria successfully metabolized approximately 27% of supplied naphthalene after 1 week. This study shows that biodegradation of aromatic hydrocarbons can occur in environments with extremely low pH values. PMID:9797263

  17. Biodegradation of malathion by Bacillus licheniformis strain ML-1

    Directory of Open Access Journals (Sweden)

    Khan Sara

    2016-01-01

    Full Text Available Malathion, a well-known organophosphate pesticide, has been used in agriculture over the last two decades for controlling pests of economically important crops. In the present study, a single bacterium, ML-1, was isolated by soil-enrichment technique and identified as Bacillus licheniformis on the basis of the 16S rRNA technique. The bacterium was grown in carbon-free minimal salt medium (MSM and was found to be very efficient in utilizing malathion as the sole source of carbon. Biodegradation experiments were performed in MSM without carbon source to determine the malathion degradation by the selected strain, and the residues of malathion were determined quantitatively using HPLC techniques. Bacillus licheniformis showed very promising results and efficiently consumed malathion as the sole carbon source via malathion carboxylesterase (MCE, and about 78% malathion was degraded within 5 days. The carboxylesterase activity was determined by using crude extract while using malathion as substrate, and the residues were determined by HPLC. It has been found that the MCE hydrolyzed 87% malathion within 96 h of incubation. Characterization of crude MCE revealed that the enzyme is robust in nature in terms of organic solvents, as it was found to be stable in various concentrations of ethanol and acetonitrile. Similarly, and it can work in a wide pH and temperature range. The results of this study highlighted the potential of Bacillus licheniformis strain ML-1 as a biodegrader that can be used for the bioremediation of malathion-contaminated soil.

  18. Biodegradation of Complex Bacteria on Phenolic Derivatives in River Water

    Institute of Scientific and Technical Information of China (English)

    GUANG-HUA LU; CHAO WANG; ZHE SUN

    2009-01-01

    Objective To isolate, incubate, and identify 4-chlorophenol-degrading complex bacteria, determine the tolerance of these bacteria to phenolic derivatives and study their synergetic metabolism as well as the aboriginal microbes and co-metabolic degradation of mixed chlorophenols in river water. Methods Microbial community of complex bacteria was identified by plate culture observation techniques and Gram stain method. Bacterial growth inhibition test was used to determine the tolerance of complex bacteria to toxicants. Biodegradability of phenolic derivatives was determined by adding 4-chlorophenol-degrading bacteria in river water. Results The complex bacteria were identified as Mycopiana, Alcaligenes, Pseudvmonas, and Flavobacterium. The domesticated complex bacteria were more tolerant to phenolic derivatives than the aboriginal bacteria from Qinhuai River. The biodegradability of chlorophenols, dihydroxybenzenes and nitrophenols under various aquatic conditions was determined and compared. The complex bacteria exhibited a higher metabolic efficiency on chemicals than the aboriginal microbes, and the final removal rate of phenolic derivatives was increased at least by 55% when the complex bacteria were added into river water. The metabolic relationship between dominant mixed bacteria and river bacteria was studied. Conclusion The complex bacteria domesticated by 4-chlorophenol can grow and be metabolized to take other chlorophenols, dihydroxybenzenes and nitrophenols as the sole carbon and energy source. There is a synergetic metabolism of most compounds between the aboriginal microbes in river water and the domesticated complex bacteria. 4-chlorophenol-degrading bacteria can co-metabolize various chlorophenols in river water.

  19. Biodegradation of phenanthrene in an anaerobic batch reactor: growth kinetics

    Directory of Open Access Journals (Sweden)

    H.S. Nasrollahzadeh

    2010-07-01

    Full Text Available The purpose of the present research was to demonstrate the ability of mixed consortia of microorganisms to degrade high concentrations of phenanthrene (PHE as the sole carbon source. Batch experiments were carried out by the induction of mineral salt medium containing PHE to the seed culture and monitoring PHE biodegradation. The microbial propagation was conducted using PHE concentrations in the range of 20 to 100 mg/l. The microbial growth on PHE was defined based on Monod and modified Logistic rate models. The kinetic studies revealed that maximum specific growth rates (μm for PHE concentrations of 20, 50 and 100 mg/l were 0.12, 0.23 and 0.035 h-1, respectively. The doubling times for microbial population in PHE concentrations of 20, 50 and 100 mg/l were 13, 15 and 17.5 h, respectively. Also, maximum cell dry weight (xm of 54.23 mg/l was achieved, while the inhibition coefficient was 0.023 h-1. It was observed that the experimental data were well represented by the proposed models. It was also found that the biodegradation of PHE was successfully performed by the isolated strains.

  20. Orthopaedic applications for PLA-PGA biodegradable polymers.

    Science.gov (United States)

    Athanasiou, K A; Agrawal, C M; Barber, F A; Burkhart, S S

    1998-10-01

    Biodegradable polymers, especially those belonging to the family of polylactic acid (PLA) and polyglycolic acid (PGA), play an increasingly important role in orthopaedics. These polymers degrade by hydrolysis and enzymatic activity and have a range of mechanical and physical properties that can be engineered appropriately to suit a particular application. Their degradation characteristics depend on several parameters including their molecular structure, crystallinity, and copolymer ratio. These biomaterials are also rapidly gaining recognition in the fledging field of tissue engineering because they can be fashioned into porous scaffolds or carriers of cells, extracellular matrix components, and bioactive agents. Although their future appears to be bright, several questions regarding the biocompatibility of these materials linger and should be addressed before their wide-scale use. In the context of musculoskeletal tissue, this report provides a comprehensive review of properties and applications of biodegradable PLA/PGA polymers and their copolymers. Of special interest are orthopaedic applications, biocompatibility studies, and issues of sterilization and storage of these versatile biomaterials. Also discussed is the fact that terms such as PLA, PGA, or PLA-PGA do not denote one material, but rather a large family of materials that have a wide range of differing bioengineering properties and concomitant biological responses. An analysis of some misconceptions, problems, and potential solutions is also provided.

  1. Biodegradation of Ochratoxin A for Food and Feed Decontamination

    Directory of Open Access Journals (Sweden)

    Luís Abrunhosa

    2010-05-01

    Full Text Available Ochratoxin A (OTA is one of the most important mycotoxins that is found in food and feed products. It has proven toxic properties, being primarily known for its nephrotoxicity and carcinogenicity to certain animal species. OTA is produced by several species of Aspergillus and Penicillium that can be found in a wide variety of agricultural products, which makes the presence of OTA in these products common. Many countries have statutory limits for OTA, and concentrations need to be reduced to as low as technologically possible in food and feed. The most important measures to be taken to control OTA are preventive in order to avoid fungal growth and OTA production. However, these measures are difficult to implement in all cases with the consequence of OTA remaining in agricultural commodities. Remediation processes are often used to eliminate, reduce or avoid the toxic effects of OTA. Biological methods have been considered increasingly as an alternative to physical and chemical treatments. However, examples of practical applications are infrequent. This review will focus on the (i known microorganisms and enzymes that are able to biodegrade OTA; (ii mode of action of biodegradation and (iii current applications. A critical discussion about the technical applicability of these strategies is presented.

  2. Characterization of Proteins in Filtrate from Biodegradation of Crop Residue

    Science.gov (United States)

    Horton, Wileatha; Trotman, A. A.

    1997-01-01

    Biodegradation of plant biomass is a feasible path for transformation of crop residue and recycling of nutrients for crop growth. The need to model the effects of factors associated with recycling of plant biomass resulting from hydroponic sweet potato production has led to investigation of natural soil isolates with the capacity for starch hydrolysis. This study sought to use nondenaturing gel electrophoresis to characterize the proteins present in filtered effluent from bioreactors seeded with starch hydrolyzing bacterial culture used in the biodegradation of senesced sweet potato biomass. The study determined the relative molecular weight of proteins in sampled effluent and the protein banding pattern was characterized. The protein profiles of effluent were similar for samples taken from independent runs under similar conditions of starch hydrolysis. The method can be used as a quality control tool for confirmation of starch hydrolysis of crop biomass. In addition, this method will allow monitoring for presence of contaminants within the system-protein profiles indicative of new enzymes in the bioreactors.

  3. Nanosilicon for nanomedicine: a step towards biodegradable electronic implants?

    Science.gov (United States)

    Canham, Leigh

    2013-10-01

    Leigh Canham received his BSc degree in physics from University College London (London, UK) in 1979 and his PhD in solid state physics from King's College London (London, UK). He now has over 30 years of experience conducting research on widely differing aspects of silicon technology. Two key personal discoveries--that nanostructured silicon can emit visible light efficiently (1990) and can be rendered medically biodegradable (1995)--have had significant academic (>15,000 citations) and commercial (multiple companies created) impact. Professor Canham is a scientist who is devoted to finding novel properties and uses for semiconductors that already pervade our everyday lives. He has 13 years of experience of start up company management, right through from cofounding with seed venture capital finance to NASDAQ listing. He has served on the board of two companies based in England, UK, one in Singapore and one in Australia. Since 1999, he has held an Honorary Professorship at the School of Physics, University of Birmingham (Birmingham, UK) for his work on luminescent silicon. In 2011, Leigh was a shortlisted finalist for the European Inventor of the Year Award from the European Patent Office for his work on biodegradable silicon. In 2012, he became a Thomson Reuters Citation Laureate for his work on luminescent silicon. Professor Canham has authored over 150 peer-reviewed papers and has more than 100 granted patents worldwide.

  4. Treatment of cork boiling wastewater using chemical oxidation and biodegradation.

    Science.gov (United States)

    Dias-Machado, Manuela; Madeira, Luis M; Nogales, Balbina; Nunes, Olga C; Manaia, Célia M

    2006-06-01

    Three cultures were enriched from cork boiling wastewater using tannic acid as the selective carbon substrate, at 25 degrees C and pH 7.2, 25 degrees C and pH 4.7 and 50 degrees C and pH 4.7. The enrichment culture obtained at neutral pH was composed of five culturable isolates, whereas from each acidic enrichment two bacterial strains were isolated. Mesophilic isolates were Gram negative bacteria belonging to the genera Klebsiella, Pseudomonas, Stenotrophomonas and Burkholderia. Thermophilic isolates were members of the genus Bacillus. Despite the capability of the enrichment cultures to use tannic acid as single carbon and energy source, those cultures were unable to reduce the total polyphenols or the total organic carbon content of cork boiling wastewater. In order to increase the bioavailability of the organic carbon in cork boiling wastewater, biodegradation was preceded by Fenton oxidation. It was demonstrated that the combined process, using small amounts of Fenton reagents and biodegradative inoculum added almost simultaneously to cork boiling wastewater, leads to TOC reductions of more than 90%.

  5. Modeling Biodegradation and Reactive Transport: Analytical and Numerical Models

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y; Glascoe, L

    2005-06-09

    The computational modeling of the biodegradation of contaminated groundwater systems accounting for biochemical reactions coupled to contaminant transport is a valuable tool for both the field engineer/planner with limited computational resources and the expert computational researcher less constrained by time and computer power. There exists several analytical and numerical computer models that have been and are being developed to cover the practical needs put forth by users to fulfill this spectrum of computational demands. Generally, analytical models provide rapid and convenient screening tools running on very limited computational power, while numerical models can provide more detailed information with consequent requirements of greater computational time and effort. While these analytical and numerical computer models can provide accurate and adequate information to produce defensible remediation strategies, decisions based on inadequate modeling output or on over-analysis can have costly and risky consequences. In this chapter we consider both analytical and numerical modeling approaches to biodegradation and reactive transport. Both approaches are discussed and analyzed in terms of achieving bioremediation goals, recognizing that there is always a tradeoff between computational cost and the resolution of simulated systems.

  6. The toxicity of oil-contaminated muskeg following biodegradation

    Energy Technology Data Exchange (ETDEWEB)

    Farwell, A.; Kelly-Hooper, F.; McAlear, J.; Sinnesael, K.; Dixon, D. [Waterloo Univ., Waterloo, ON (Canada)

    2009-07-01

    The current environmental criteria for the maximum allowable levels of hydrocarbons resulting from an oil spill assume that all detectable hydrocarbons are petroleum hydrocarbons (PHC) and do not account for naturally-occurring biogenic hydrocarbons (BHC). As such, some soils may be wrongfully assessed as being PHC contaminated. A false identification could lead to unnecessary and costly bioremediation that is potentially disruptive to functioning ecosystems. This study is part of a larger project to differentiate between natural and petroleum F3 hydrocarbons in muskeg material that has been impacted by an oil spill. The toxicity of oil-contaminated muskeg was examined following biodegradation in laboratory microcosms. Preliminary acute toxicity tests using locally purchased Sphagnum peat moss contaminated with Federated Crude oil had no effect on the survival of earthworms (Eisenia andrei), but springtails (Orthonychiurus folsomi) were more sensitive. Earthworm and springtail reproduction bioassays and a Northern wheatgrass (Elymus lanceolatus) growth bioassay was used to test the crude-oil-contaminated peat. All 3 test species will be used to test for reduced toxicity following biodegradation of Federated Crude oil-contaminated muskeg from northern Alberta under simulated conditions.

  7. Preparation and Characteristics of Biodegradable Polyurethane/Clay Nanocomposite Films

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seong Woo [Kyonggi University, Suwon (Korea, Republic of)

    2013-06-15

    Biodegradable polyurethane (PU)/clay nanocomposite films were prepared via extrusion compounding process followed by casting film process. Organically modified montmorillonite (denoted as C30B) with a large amount of hydroxyl groups on its surface was used for the formation of strong bonding with PU resin. From both XRD analysis and TEM observations, the intercalated and exfoliated structure, and dispersion state of silicate platelets in the compounded nanocomposite films were confirmed. In addition, the rheological and tensile properties, optical transparency, oxygen permeability of the prepared nanocomposites were investigated as a function of added nanoclay content, and moreover based on these results, the correlation between the morphology and the resulting properties of the nanocomposites could be presented. The inclusion of nanoclays at appropriate content resulted in remarkable improvement in the nanocomposite performance including tensile modulus, elongation, transparency, and oxygen barrier property, however at excess amount of nanoclays, reduction or very slight increase was observed due to poor dispersion. The biodegradability of the prepared nanocomposite film was evaluated by examining the deterioration in the barrier and tensile properties during degradation period under compost.

  8. Tissue Equivalents Based on Cell-Seeded Biodegradable Microfluidic Constructs

    Directory of Open Access Journals (Sweden)

    Sarah L. Tao

    2010-03-01

    Full Text Available One of the principal challenges in the field of tissue engineering and regenerative medicine is the formation of functional microvascular networks capable of sustaining tissue constructs. Complex tissues and vital organs require a means to support oxygen and nutrient transport during the development of constructs both prior to and after host integration, and current approaches have not demonstrated robust solutions to this challenge. Here, we present a technology platform encompassing the design, construction, cell seeding and functional evaluation of tissue equivalents for wound healing and other clinical applications. These tissue equivalents are comprised of biodegradable microfluidic scaffolds lined with microvascular cells and designed to replicate microenvironmental cues necessary to generate and sustain cell populations to replace dermal and/or epidermal tissues lost due to trauma or disease. Initial results demonstrate that these biodegradable microfluidic devices promote cell adherence and support basic cell functions. These systems represent a promising pathway towards highly integrated three-dimensional engineered tissue constructs for a wide range of clinical applications.

  9. Biodegradable star polymers functionalized with beta-cyclodextrin inclusion complexes.

    Science.gov (United States)

    Setijadi, Eki; Tao, Lei; Liu, Jingquan; Jia, Zhongfan; Boyer, Cyrille; Davis, Thomas P

    2009-09-14

    Three-armed biodegradable star polymers made from polystyrene (polySt) and poly (polyethylene glycol) acrylate (polyPEG-A) were synthesized via a "core first" methodology using a trifunctional RAFT agent, created by attaching RAFT agents to a core via their R-groups. The resultant three-armed polymeric structures were well-defined, with polydispersity indices less than 1.2. Upon aminolysis and further reaction with dithiodipyridine (DTDP), these three-armed polymers could be tailored with sulfhydryl and pyridyldisulfide (PDS) end functionalities, available for further reaction with any free-sulfhydryl group containing precursors to form disulfide linkages. Nuclear magnetic resonance (NMR) confirmed that more than 98% of the polymer arms retained integral trithiocarbonate active sites after polymerization. Intradisulfide linkages between the core and the arms conferred biodegradability on the star architectures. Subsequently, the arm-termini were attached to cholesterol also via disulfide linkages. The cholesterol terminated arms were then used to form supramolecular structures via inclusion complex formation with beta-cyclodextrin (beta-CD). The star architectures were found to degrade rapidly on treatment with DL-dithiothereitol (DTT). The star polymers and supramolecular structures were characterized using gel permation chromatography (GPC), static light scattering (SLS), 2D NMR, and fluorescence spectroscopy.

  10. BIODEGRADATION OF TEXTILE DYES BY Anabaena flos-aqual

    Directory of Open Access Journals (Sweden)

    Brigida Pimentel Villar de Queiroz

    2011-04-01

    Full Text Available The pollution caused by dumping of toxic waste into the environment has resulted in impairment of essential natural resources such as water. With population growth and industries, the generation of waste increases substantially. Specifically, about 3,000 were commercial dyes to be carcinogenic and have no longer been manufactured, but in third world countries such as Brazil, some of these dyes high commercial value, are still in use. This study aimed to evaluate the possibility of biodegradation of dyes technical Drim CL 2 R Yellow and Blue Drim CL R. We tested the ability of degradation of these dyes by the cyanobacteria blue-green algae Anabaena flos-aqual. For this, their effectiveness in the degradation was evaluated in terms of discoloration spectrophotometrically. The blue dye was greater than R Drim CL degradation rate compared to the yellow dye Drim CL 2R. The species Anabaena flos-aqual achieved high degradation efficiency compared to blue dye, revealing a high potential applicability in processes of textile biodegradations in the county of Americana.

  11. Biodegradability of a polyacrylate superabsorbent in agricultural soil.

    Science.gov (United States)

    Wilske, Burkhard; Bai, Mo; Lindenstruth, Beate; Bach, Martin; Rezaie, Zahra; Frede, Hans-Georg; Breuer, Lutz

    2014-01-01

    Superabsorbent polymers (SAP) are used, inter alia, as soil amendment to increase the water holding capacity of soils. Biodegradability of soil conditioners has become a desired key characteristic to protect soil and groundwater resources. The present study characterized the biodegradability of one acrylate based SAP in four agricultural soils and at three temperatures. Mineralisation was measured as the (13)CO₂ efflux from (13)C-labelled SAP in soil incubations. The SAP was either single-labelled in the carboxyl C-atom or triple-labelled including additionally the two C-atoms interlinked in the SAP backbone. The dual labelling allowed estimating the degradation of the polyacrylate main chain. The (13)CO₂ efflux from samples was measured using an automated system including wavelength-scanned cavity ring-down spectroscopy. Based on single-labelled SAP, the mean degradation after 24 weeks varied between 0.45% in loamy sand and 0.82% in loam. However, the differences between degradation rates in different soils were not significant due to a large intra-replicate variability. Similarly, mean degradation did not differ significantly between effective temperature regimes of 20° and 30 °C after 12 weeks. Results from the triple-labelled SAP were lower as compared to their single-labelled variant. Detailed results suggest that the polyacrylate main chain degraded in the soils, if at all, at rates of 0.12-0.24 % per 6 months.

  12. Aerobic biodegradation of a mixture of monosubstituted phenols in a sequencing batch reactor

    Energy Technology Data Exchange (ETDEWEB)

    Fernández, Isaac; Suárez-Ojeda, María Eugenia; Pérez, Julio; Carrera, Julián, E-mail: julian.carrera@uab.es

    2013-09-15

    Highlights: • Aerobic biodegradation of a mixture of p-nitrophenol and o-cresol is feasible. • Simultaneous biodegradation of p-nitrophenol and o-cresol was achieved at long-term. • o-Chlorophenol caused complete failure of the sequencing batch reactor. • Biomass had good settling properties although no mature granules were obtained. • p-Nitrophenol is believed to be responsible for granulation failure. -- Abstract: A sequencing batch reactor (SBR) was inoculated with p-nitrophenol-degrading activated sludge to biodegrade a mixture of monosubstituted phenols: p-nitrophenol (PNP), PNP and o-cresol; and PNP, o-cresol and o-chlorophenol. Settling times were progressively decreased to promote biomass granulation. PNP was completely biodegraded. The PNP and o-cresol mixture was also biodegraded although some transitory accumulation of intermediates occurred (mainly hydroquinone and catechol). o-Chlorophenol was not biodegraded and resulted in inhibition of o-cresol and PNP biodegradation and complete failure of the SBR within a few days. The biomass had very good settling properties when a settling time of 1 min was applied: sludge volume index (SVI{sub 5}) below 50 mL g{sup −1}, SVI{sub 5}/SVI{sub 30} ratio of 1 and average particle size of 200 μm.

  13. Modeling of vapor intrusion from hydrocarbon-contaminated sources accounting for aerobic and anaerobic biodegradation.

    Science.gov (United States)

    Verginelli, Iason; Baciocchi, Renato

    2011-11-01

    A one-dimensional steady state vapor intrusion model including both anaerobic and oxygen-limited aerobic biodegradation was developed. The aerobic and anaerobic layer thickness are calculated by stoichiometrically coupling the reactive transport of vapors with oxygen transport and consumption. The model accounts for the different oxygen demand in the subsurface required to sustain the aerobic biodegradation of the compound(s) of concern and for the baseline soil oxygen respiration. In the case of anaerobic reaction under methanogenic conditions, the model accounts for the generation of methane which leads to a further oxygen demand, due to methane oxidation, in the aerobic zone. The model was solved analytically and applied, using representative parameter ranges and values, to identify under which site conditions the attenuation of hydrocarbons migrating into indoor environments is likely to be significant. Simulations were performed assuming a soil contaminated by toluene only, by a BTEX mixture, by Fresh Gasoline and by Weathered Gasoline. The obtained results have shown that for several site conditions oxygen concentration below the building is sufficient to sustain aerobic biodegradation. For these scenarios the aerobic biodegradation is the primary mechanism of attenuation, i.e. anaerobic contribution is negligible and a model accounting just for aerobic biodegradation can be used. On the contrary, in all cases where oxygen is not sufficient to sustain aerobic biodegradation alone (e.g. highly contaminated sources), anaerobic biodegradation can significantly contribute to the overall attenuation depending on the site specific conditions.

  14. Biodegradation of polystyrene-graft-starch copolymers in three different types of soil.

    Science.gov (United States)

    Nikolic, Vladimir; Velickovic, Sava; Popovic, Aleksandar

    2014-01-01

    Materials based on polystyrene and starch copolymers are used in food packaging, water pollution treatment, and textile industry, and their biodegradability is a desired characteristic. In order to examine the degradation patterns of modified, biodegradable derivates of polystyrene, which may keep its excellent technical features but be more environmentally friendly at the same time, polystyrene-graft-starch biomaterials obtained by emulsion polymerization in the presence of new type of initiator/activator pair (potassium persulfate/different amines) were subjected to 6-month biodegradation by burial method in three different types of commercially available soils: soil rich in humus and soil for cactus and orchid growing. Biodegradation was monitored by mass decrease, and the highest degradation rate was achieved in soil for cactus growing (81.30%). Statistical analysis proved that microorganisms in different soil samples have different ability of biodegradation, and there is a significant negative correlation between the share of polystyrene in copolymer and degree of biodegradation. Grafting of polystyrene on starch on one hand prevents complete degradation of starch that is present (with maximal percentage of degraded starch ranging from 55 to 93%), while on the other hand there is an upper limit of share of polystyrene in the copolymer (ranging from 37 to 77%) that is preventing biodegradation of degradable part of copolymers.

  15. Modeling of vapor intrusion from hydrocarbon-contaminated sources accounting for aerobic and anaerobic biodegradation

    Science.gov (United States)

    Verginelli, Iason; Baciocchi, Renato

    2011-11-01

    A one-dimensional steady state vapor intrusion model including both anaerobic and oxygen-limited aerobic biodegradation was developed. The aerobic and anaerobic layer thickness are calculated by stoichiometrically coupling the reactive transport of vapors with oxygen transport and consumption. The model accounts for the different oxygen demand in the subsurface required to sustain the aerobic biodegradation of the compound(s) of concern and for the baseline soil oxygen respiration. In the case of anaerobic reaction under methanogenic conditions, the model accounts for the generation of methane which leads to a further oxygen demand, due to methane oxidation, in the aerobic zone. The model was solved analytically and applied, using representative parameter ranges and values, to identify under which site conditions the attenuation of hydrocarbons migrating into indoor environments is likely to be significant. Simulations were performed assuming a soil contaminated by toluene only, by a BTEX mixture, by Fresh Gasoline and by Weathered Gasoline. The obtained results have shown that for several site conditions oxygen concentration below the building is sufficient to sustain aerobic biodegradation. For these scenarios the aerobic biodegradation is the primary mechanism of attenuation, i.e. anaerobic contribution is negligible and a model accounting just for aerobic biodegradation can be used. On the contrary, in all cases where oxygen is not sufficient to sustain aerobic biodegradation alone (e.g. highly contaminated sources), anaerobic biodegradation can significantly contribute to the overall attenuation depending on the site specific conditions.

  16. Influence of biodegradation on benzocarbazole distri-butions in reservoired oils

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Partition coefficient difference of benzocarba-zole isomers between oil, water and mineral phase makes them auseful indicator to quantify petroleum migration distance. Because of their nitrogen-heteroatom andannelated aromatic cycles they are generally regarded asbeing more resistant and the effects of biodegradation ontheir concentrations and distributions have not previouslybeen investigated. Reservoir extracts from three wells lo-cated in the Leng43 block of the Liaohe Basin were analyzed to investigate their occurrence and the effect of biodegrada-tion. Both hydrocarbon biomarkers and benzocarbazole isomers show systematical changes with the increase extent of biodegradation in study columns. Carbazole compounds may be biodegraded in a similar way to that observed in aliphatic and aromatic hydrocarbons. The distance from oil water contact is a primary control factor for biodegradation. The concentrations of benzocarbazole isomers show a slight increase in the upper part of the columns then a sharp de-crease towards oil water contact (OWC). Among three iso-mers benzo[a]carbazole seems more susceptible to biode-gradation than other two isomers and benzo[b]carbazole has higher ability to res ist bacterial attack. Benzo[b]carba-zole/benzo- [a]carbazole ratios can sensitively indicate the degree of biodegradation and the benzocarbazole index (BCratio) cannot be directly used as a migration indicator inbiodegraded oils.

  17. Risk factors for breakage of biodegradable plate systems after bilateral sagittal split mandibular setback surgery.

    Science.gov (United States)

    Yoshioka, Izumi; Igawa, Kaori; Nagata, Jyunko; Yoshida, Maho; Baba, Takashi; Ichiki, Takeshi; Kondoh, Yudai; Takamori, Koichi; Kashima, Koji; Sakoda, Sumio

    2013-06-01

    The aim of this retrospective study was to evaluate the risk factors associated with breakage of biodegradable plate systems after bilateral sagittal split mandibular setback. We studied 169 Japanese adults (62 men, 107 women; age range 16-53 years) with deformities of the jaw diagnosed as mandibular prognathism. All patients were treated by bilateral sagittal split osteotomy (BSSO) with 2 biodegradable fixation plates and screws at the anterior mandibular ramus. We collected the following data from the medical records and radiological findings: sex; age; degree of setback; presence of asymmetry; presence of open bite; operation; design of the plate; operating time; and blood loss. Multiple logistic regression analysis was used to find the factors that were independently associated with the dependent variable: breakage of the biodegradable plate system. In 10 of the 169 patients (6%) the biodegradable plate system for the BSSO broke. Factors that influenced whether or not the biodegradable plate system fractured were if they were asymmetrical (odds ratio (OR) 5.35; P=0.02) and had an open bite (OR 5.20; P=0.02). Asymmetry or open bite was significantly associated with breaks in the biodegradable plate system. Biodegradable plates should be used only when loading is minimal.

  18. Monitoring biodegradation of diesel fuel in bioventing processes using in situ respiration rate.

    Science.gov (United States)

    Lee, T H; Byun, I G; Kim, Y O; Hwang, I S; Park, T J

    2006-01-01

    An in situ measuring system of respiration rate was applied for monitoring biodegradation of diesel fuel in a bioventing process for bioremediation of diesel contaminated soil. Two laboratory-scale soil columns were packed with 5 kg of soil that was artificially contaminated by diesel fuel as final TPH (total petroleum hydrocarbon) concentration of 8,000 mg/kg soil. Nutrient was added to make a relative concentration of C:N:P = 100:10:1. One soil column was operated with continuous venting mode, and the other one with intermittent (6 h venting/6 h rest) venting mode. On-line O2 and CO2 gas measuring system was applied to measure O2 utilisation and CO2 production during biodegradation of diesel for 5 months. Biodegradation rate of TPH was calculated from respiration rate measured by the on-line gas measuring system. There were no apparent differences between calculated biodegradation rates from two columns with different venting modes. The variation of biodegradation rates corresponded well with trend of the remaining TPH concentrations comparing other biodegradation indicators, such as C17/pristane and C18/phytane ratio, dehydrogenase activity, and the ratio of hydrocarbon utilising bacteria to total heterotrophic bacteria. These results suggested that the on-line measuring system of respiration rate would be applied to monitoring biodegradation rate and to determine the potential applicability of bioventing process for bioremediation of oil contaminated soil.

  19. Kinetics and thermodynamics of biodegradation of hydrolyzed polyacrylamide under anaerobic and aerobic conditions.

    Science.gov (United States)

    Zhao, Lanmei; Bao, Mutai; Yan, Miao; Lu, Jinren

    2016-09-01

    Kinetics and thermodynamics of hydrolyzed polyacrylamide (HPAM) biodegradation in anaerobic and aerobic activated sludge biochemical treatment systems were explored to determine the maximum rate and feasibility of HPAM biodegradation. The optimal nutrient proportions for HPAM biodegradation were determined to be 0.08g·L(-1) C6H12O6, 1.00g·L(-1) NH4Cl, 0.36g·L(-1) NaH2PO4 and 3.00g·L(-1) K2HPO4 using response surface methodology (RSM). Based on the kinetics, the maximum HPAM biodegradation rates were 16.43385mg·L(-1)·d(-1) and 2.463mg·L(-1)·d(-1) in aerobic and anaerobic conditions, respectively. The activation energy (Ea) of the aerobic biodegradation was 48.9897kJ·mol(-1). Entropy changes (ΔS) of biochemical treatment system decreased from 216.21J·K(-1) to 2.39J·K(-1). Thermodynamic windows of opportunity for HPAM biodegradation were drawn. And it demonstrated HPAM was biodegraded into acetic acid and CO2 under laboratory conditions. Growth-process equations for functional bacteria anaerobically grown on polyacrylic acid were constructed and it confirmed electron equivalence between substrate and product.

  20. Biodegradation of New Polymer Foundry Binders for the Example of the Composition Polyacrylic Acid/Starch

    Directory of Open Access Journals (Sweden)

    Beata Grabowska

    2011-04-01

    Full Text Available The investigations on the biodegradation process pathway of the new polymer binders for the example of water soluble compositionpolyacrylic acid/starch are presented in the hereby paper. Degradation was carried out in water environment and in a soil. Thedetermination of the total oxidation biodegradation in water environment was performed under laboratory conditions in accordance with the static water test system (Zahn-Wellens method, in which the mixture undergoing biodecomposition contained inorganic nutrient,activated sludge and the polymer composition, as the only carbon and energy source. The biodecomposition progress of the polymercomposition sample in water environment was estimated on the basis of the chemical oxygen demand (COD measurements and thedetermination the biodegradation degree, Rt, during the test. These investigations indicated that the composition polyacrylic acid/starchconstitutes the fully biodegradable material in water environment. The biodegradation degree Rt determined in the last 29th day of the test duration achieved 65%, which means that the investigated polymer composition can be considered to be fully biodegradable.During the 6 months biodegradation process of the cross-linked sample of the polymer composition in a garden soil several analysis ofsurface and structural changes, resulting from the sample decomposition, were performed. Those were: thermal analyses (TG-DSC,structural analyses (Raman spectroscopy and microscopic analyses (optical microscopy, AFM.

  1. Anaerobic biodegradation of soybean biodiesel and diesel blends under methanogenic conditions.

    Science.gov (United States)

    Wu, Shuyun; Yassine, Mohamad H; Suidan, Makram T; Venosa, Albert D

    2015-12-15

    Biotransformation of soybean biodiesel and the inhibitory effect of petrodiesel were studied under methanogenic conditions. Biodiesel removal efficiency of more than 95% was achieved in a chemostat with influent biodiesel concentrations up to 2.45 g/L. The kinetics of anaerobic biodegradation of soybean biodiesel B100 (biodiesel only) with different petrodiesel loads was studied using biomass pre-acclimated to B100 and B80 (80% biodiesel and 20% petrodiesel). The results indicated that the biodiesel fraction of the blend could be effectively biodegraded, whereas petrodiesel was not biodegraded at all under methanogenic conditions. The presence of petrodiesel in blends with biodiesel had a greater inhibitory effect on the rate of biodegradation than the biodegradation efficiency (defined as the efficiency of methane production). Both the biodegradation rate coefficient and the methane production efficiency increased almost linearly with the increasing fraction of biodiesel. With the increasing fraction of petrodiesel, the biodegradation rate and efficiency were correlated with the concentration of soluble FAMEs in the water.

  2. Biodegradation of selected UV-irradiated and non-irradiated polycyclic aromatic hydrocarbons (PAHs).

    Science.gov (United States)

    Lehto, Kirsi-Maarit; Puhakka, Jaakko A; Lemmetyinen, Helge

    2003-08-01

    Biodegradation of UV-irradiated anthracene, pyrene, benz[a]anthracene, and dibenz[a,h]anthracene was compared to that of the non-irradiated samples, individually and in synthetic mixtures with enrichment cultures. Combined treatment was repeated for individual anthracene and for the PAH mixture with Sphingomonas sp. strain EPA 505 and Sphingomonas yanoikuyae. Enrichment culture studies were performed on the PAH mixtures in the presence of the main photoproduct of anthracene, pure 9,10-anthracenedione. Photochemically pretreated creosote solutions were also subjected to biodegradation and the results were compared to those of the non-irradiated solutions. The primary interest was on 16 polycyclic aromatic hydrocarbons (PAHs) listed as priority pollutants by European Union (EU) and the United States Environmental Protection Agency (USEPA). Irradiation accelerated the biodegradation onset for anthracene, pyrene, and benz[a]anthracene when they were treated individually. The biodegradation of irradiated pyrene started with no lag phase and was complete by 122 h whereas biodegradation of the non-irradiated sample had a lag of 280 h and resulted in complete degradation by 720 h. Biodegradation of PAHs was accelerated in synthetic mixtures, especially in the presence of pure 9,10-anthracenedione. In general, irradiation had no effect on the biodegradation of PAHs incubated in synthetic mixtures or with pure cultures. Under current experimental conditions, the UV-irradiation invariably reduced the biodegradation of PAHs in creosote. Based on the results of the present and previous photochemical-biological studies of PAHs, the influence of the photochemical pretreatment on the biodegradation is highly dependent on the compounds being treated and other process parameters.

  3. Integrated Anaerobic-Aerobic Biodegradation of Multiple Contaminants Including Chlorinated Ethylenes, Benzene, Toluene, and Dichloromethane.

    Science.gov (United States)

    Yoshikawa, Miho; Zhang, Ming; Toyota, Koki

    2017-01-01

    Complete bioremediation of soils containing multiple volatile organic compounds (VOCs) remains a challenge. To explore the possibility of complete bioremediation through integrated anaerobic-aerobic biodegradation, laboratory feasibility tests followed by alternate anaerobic-aerobic and aerobic-anaerobic biodegradation tests were performed. Chlorinated ethylenes, including tetrachloroethylene (PCE), trichloroethylene (TCE), cis-dichloroethylene (cis-DCE), and vinyl chloride (VC), and dichloromethane (DCM) were used for anaerobic biodegradation, whereas benzene, toluene, and DCM were used for aerobic biodegradation tests. Microbial communities involved in the biodegradation tests were analyzed to characterize the major bacteria that may contribute to biodegradation. The results demonstrated that integrated anaerobic-aerobic biodegradation was capable of completely degrading the seven VOCs with initial concentration of each VOC less than 30 mg/L. Benzene and toluene were degraded within 8 days, and DCM was degraded within 20 to 27 days under aerobic conditions when initial oxygen concentrations in the headspaces of test bottles were set to 5.3% and 21.0%. Dehalococcoides sp., generally considered sensitive to oxygen, survived aerobic conditions for 28 days and was activated during the subsequent anaerobic biodegradation. However, degradation of cis-DCE was suppressed after oxygen exposure for more than 201 days, suggesting the loss of viability of Dehalococcoides sp., as they are the only known anaerobic bacteria that can completely biodegrade chlorinated ethylenes to ethylene. Anaerobic degradation of DCM following previous aerobic degradation was complete, and yet-unknown microbes may be involved in the process. The findings may provide a scientific and practical basis for the complete bioremediation of multiple contaminants in situ and a subject for further exploration.

  4. The second green revolution? Production of plant-based biodegradable plastics.

    Science.gov (United States)

    Mooney, Brian P

    2009-03-01

    Biodegradable plastics are those that can be completely degraded in landfills, composters or sewage treatment plants by the action of naturally occurring micro-organisms. Truly biodegradable plastics leave no toxic, visible or distinguishable residues following degradation. Their biodegradability contrasts sharply with most petroleum-based plastics, which are essentially indestructible in a biological context. Because of the ubiquitous use of petroleum-based plastics, their persistence in the environment and their fossil-fuel derivation, alternatives to these traditional plastics are being explored. Issues surrounding waste management of traditional and biodegradable polymers are discussed in the context of reducing environmental pressures and carbon footprints. The main thrust of the present review addresses the development of plant-based biodegradable polymers. Plants naturally produce numerous polymers, including rubber, starch, cellulose and storage proteins, all of which have been exploited for biodegradable plastic production. Bacterial bioreactors fed with renewable resources from plants--so-called 'white biotechnology'--have also been successful in producing biodegradable polymers. In addition to these methods of exploiting plant materials for biodegradable polymer production, the present review also addresses the advances in synthesizing novel polymers within transgenic plants, especially those in the polyhydroxyalkanoate class. Although there is a stigma associated with transgenic plants, especially food crops, plant-based biodegradable polymers, produced as value-added co-products, or, from marginal land (non-food), crops such as switchgrass (Panicum virgatum L.), have the potential to become viable alternatives to petroleum-based plastics and an environmentally benign and carbon-neutral source of polymers.

  5. Crude oil biodegradation by a mixed bacterial culture

    Energy Technology Data Exchange (ETDEWEB)

    Van Hamme, J.D.

    2000-07-01

    Mixed cultures with broad substrate specificity usually form the basis for biological methods used for the remediation of petroleum hydrocarbon-contaminated wastes. Bow River crude oil was used as a model substrate for the study of microbe-microbe and microbe-substrate interactions in batch fermentation systems. Substrate availability limited the mixed-bacterial culture due to hydrocarbon insolubility. A method of improving biodegradation through the use of chemical surfactants was tested. A hydrophile-lipophile balance of 13 led to optimum enhancement at supra-critical micellization concentrations not exceeding a critical level, as indicated by the results of a detailed study with nonylphenol ethoxylates. A broad variety of trypticase soy agar-culturable bacteria was contained in the culture. Initially, Pseudomonas Flavimonas and Stenotrophomonas spp. dominated in the fermentations with different hydrocarbon mixtures. The lag time of Stenotrophomonas sp. and exposure to Bow River saturates selected for an Acinetobacter calcoacetius strain were increased by a chemical surfactant. Following prolonged incubation, a greater variety of mainly non-hydrocarbon degrading bacteria were isolated in each case. Low molecular weight volatile hydrocarbons were degraded in closed systems and the greatest activity from the culture occurred against the saturate and aromatic fractions. To monitor volatile hydrocarbon degradation in live cultures at 30 degrees Celsius, a rapid and sensitive solid phase microextraction methodology was developed. Only the cultures grown on crude oil in sealed flasks, or in open flasks amended with yeast extract retained their volatile hydrocarbon-degrading capabilities. Correlated with reduced proportions of hydrocarbon-degrading bacteria in biodegradation flasks, metabolic capacity decreased with inoculum age. The degradation hierarchy and chemical surfactant effects were confirmed by pure and co-culture studies. The presence of a chemical surfactant

  6. Biodegradable Porous Silicon Nanomaterials for Imaging and Treatment of Cancer

    Science.gov (United States)

    Gu, Luo

    Cancer is the second leading cause of death, claiming ˜0.56 million lives in the U.S. every year following heart diseases (˜0.62 million). From 1991 to 2007, mortality associated with heart diseases decreased 39%; by contrast, the death rate of cancer only decreased by 17% in spite of intensive research and improved therapeutics. The stagnation of conventional medicine and the complexity of cancer demand new therapeutic strategies. As an emerging approach, the use of nanomaterials as cancer diagnostic and therapeutic agents has shown promising results due to their unique physical and chemical properties. To date, more than two dozen nanoparticle-based products have been approved for clinical use and they show advantages over conventional therapeutics. However, translation of many other nanomaterials has been impeded due to concerns over toxicity and biodegradability. This dissertation presents the development of biodegradable luminescent porous silicon nanomaterials and their potential applications for imaging and treatment of cancer. After a brief introduction to nanomedicine and the biomedical applications of porous silicon, Chapter 2 presents a method of making silicon nanoparticles with porous structure and intrinsic luminescence (LPSiNPs). The low toxicity and biodegradability of LPSiNPs are demonstrated in vitro with human cancer cells and in vivo with mouse model. The in vivo clearance of intravenously injected LPSiNPs is studied by tracking the emission of the nanoparticles with fluorescence imaging. Chapter 3 presents a diagnostic application of LPSiNPs. Time-gated fluorescence imaging of tumors using LPSiNPs with long emission lifetime is developed. This technique can effectively eliminate interference from short-lived tissue autofluorescence and improve the detection sensitivity. Chapter 4--6 demonstrate the therapeutic applications of porous silicon nanomaterials. In Chapter 4, magnetically-guided delivery of anticancer drug to cancer cells in vitro

  7. Generation of Microcellular Biodegradable Polycaprolactone Foams in Supercritical Carbon Dioxide

    Institute of Scientific and Technical Information of China (English)

    Xu Qun; Ren Xian-wen; Chang Yu-ning; Yu Long; Wang Jing-wu

    2004-01-01

    Present now the application of microcellular polymeric materials in biomedical field is growing rapidly, as that of guided tissue regeneration and cell transplantation. As far as guided tissue regeneration is concerned, porous implants are used as size selective membrane to promote the growth of a special tissue in a healing site. Ideally, the implant should be inherently biocompatible,have well-defined cell size and be resorbable with appropriate biodegradation rates.Poly(a-caprolactone) (PCL) is a kind of materials suit for the demands above. PCL is biocompatible and biodegradable aliphatic polyester which is nontoxic for living organisms and bioresorbable after a period of implantation. Because of its unique combination of biocompatibility, permeability and biodegradability, PCL and some of its copolymer with lactides and glycolide have been widely applied in medicine as artificial skin, artificial bone and containers for sustained drug release.Goel and Beckman have reported a new method to generate microcellular poly(methy l methacrylate) foams in which the samples are saturated with CO2 under a series of supercritical (SC)conditions, and then the system is rapidly depressurized to atmospheric pressure at constant temperature. Unlike traditional methods, it reduces glass-transition temperature (Tg) of the mixture to below the experimental temperature rather than directly heat the system above Tg. In this process of nucleation, no phase separation occurs as well as no phase boundary meets, so the cellular structure of the foam can be retained better.In this work, we have generated PCL foams by using supercritical CO2. Because of the low glass transition temperature (Tg = -60 ℃) of PCL far below the ice point, the experimental temperature in our study is much higher than Tg, which is different from the studies by others before. A series of variable factors on the foam structure as saturation temperature, saturation pressure, saturation time and depressurization

  8. Development of biodegradable magnesium alloy stents with coating

    Directory of Open Access Journals (Sweden)

    Lorenza Petrini

    2014-07-01

    Full Text Available Biodegradable stents are attracting the attention of many researchers in biomedical and materials research fields since they can absolve their specific function for the expected period of time and then gradually disappear. This feature allows avoiding the risk of long-term complications such as restenosis or mechanical instability of the device when the vessel grows in size in pediatric patients. Up to now biodegradable stents made of polymers or magnesium alloys have been proposed. However, both the solutions have limitations. The polymers have low mechanical properties, which lead to devices that cannot withstand the natural contraction of the blood vessel: the restenosis appears just after the implant, and can be ascribed to the compliance of the stent. The magnesium alloys have much higher mechanical properties, but they dissolve too fast in the human body. In this work we present some results of an ongoing study aiming to the development of biodegradable stents made of a magnesium alloy that is coated with a polymer having a high corrosion resistance. The mechanical action on the blood vessel is given by the magnesium stent for the desired period, being the stent protected against fast corrosion by the coating. The coating will dissolve in a longer term, thus delaying the exposition of the magnesium stent to the corrosive environment. We dealt with the problem exploiting the potentialities of a combined approach of experimental and computational methods (both standard and ad-hoc developed for designing magnesium alloy, coating and scaffold geometry from different points of views. Our study required the following steps: i selection of a Mg alloy suitable for stent production, having sufficient strength and elongation capability; ii computational optimization of the stent geometry to minimize stress and strain after stent deployment, improve scaffolding ability and corrosion resistance; iii development of a numerical model for studying stent

  9. Modification of cell surface properties of Pseudomonas alcaligenes S22 during hydrocarbon biodegradation.

    Science.gov (United States)

    Kaczorek, Ewa; Moszyńska, Sylwia; Olszanowski, Andrzej

    2011-04-01

    Biodegradation of water insoluble hydrocarbons can be significantly increased by the addition of natural surfactants one. Very promising option is the use of saponins. The obtained results indicated that in this system, after 21 days, 92% biodegradation of diesel oil could be achieved using Pseudomonas alcaligenes. No positive effect on the biodegradation process was observed using synthetic surfactant Triton X-100. The kind of carbon source influences the cell surface properties of microorganisms. Modification of the surface cell could be observed by control of the sedimentation profile. This analytical method is a new approach in microbiological analysis.

  10. Biodegradability of poly(3-hydroxybutyrate) film grafted with vinyl acetate: Effect of grafting and saponification

    Energy Technology Data Exchange (ETDEWEB)

    Wada, Yuki [Department of Biological and Chemical Engineering, Faculty of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515 (Japan)]. E-mail: wada.yuki@jaea.go.jp; Seko, Noriaki [Environment and Industrial Materials Research Division, Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Nagasawa, Naotsugu [Environment and Industrial Materials Research Division, Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Tamada, Masao [Environment and Industrial Materials Research Division, Quantum Beam Science Directorate, Japan Atomic Energy Agency, 1233 Watanuki-machi, Takasaki, Gunma 370-1292 (Japan); Kasuya, Ken-ichi [Department of Biological and Chemical Engineering, Faculty of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515 (Japan); Mitomo, Hiroshi [Department of Biological and Chemical Engineering, Faculty of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515 (Japan)

    2007-06-15

    Radiation-induced graft polymerization of vinyl acetate (VAc) onto poly(3-hydroxybutyrate) (PHB) film was carried out. At a degree of grafting higher than 5%, the grafted films (PHB-g-VAc) completely lost the enzymatic degradability that is characteristic of PHB due to the grafted VAc covering the surface of the PHB film. However, the biodegradability of the PHB-g-VAc films was recovered when the films were saponified in alkali solution under optimum conditions. Graft chains of the PHB-g-VAc film reacted selectively to become biodegradable polyvinyl alcohol (PVA). The biodegradability of the saponified PHB-g-VAc film increased rapidly with time.

  11. STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

    Institute of Scientific and Technical Information of China (English)

    WANG Shufang; SONG Cunjiang; CHEN Guangxin; LIU Jing; YANG Chao; ZHANG Xihui; GUO Tianying; ZHANG Banghua

    2004-01-01

    Poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/Organophilic montmorillonite (PHBV/OMMT) nanocomposites were prepared and the biodegradability of the PHBV/OMMT nanocomposites was studied by a cultivation degrading method in soil suspension. The relationship between structure and biodegradability of PHBV/OMMT nanocomposites was investigated. The results showed that the biodegradability of PHBV/OMMT nanocomposites decreased with increasing amount of OMMT and it was related to the number of PHBV degrading microorganisms in degradation environment, the anti-microbial property of OMMT and the degree of crystallinity of the nanocomposites.

  12. Modern mass spectrometry in the characterization and degradation of biodegradable polymers

    Energy Technology Data Exchange (ETDEWEB)

    Rizzarelli, Paola, E-mail: paola.rizzarelli@cnr.it; Carroccio, Sabrina

    2014-01-15

    Graphical abstract: -- Highlights: •Recent trends in the structural characterization of biodegradable polymers by MALDI and ESI MS are discussed. •MALDI MS as a noteworthy tool to follow the synthetic polymerization route of biodegradable materials is evidenced. •Elucidation of degradation mechanisms by modern MS techniques is examined. •ESI MS and HPLC–ESI MS are highlighted as highly suitable methods for structural and quantitative analysis of water-soluble biodegradation products. •Novel MS methods developed ad hoc and new MALDI matrices for biodegradable polymers are reviewed. -- Abstract: In the last decades, the solid-waste management related to the extensively growing production of plastic materials, in concert with their durability, have stimulated increasing interest in biodegradable polymers. At present, a variety of biodegradable polymers has already been introduced onto the market and can now be competitive with non biodegradable thermoplastics in different fields (packaging, biomedical, textile, etc.). However, a significant economical effort is still directed in tailoring structural properties in order to further broaden the range of applications without impairing biodegradation. Improving the performance of biodegradable materials requires a good characterization of both physico-chemical and mechanical parameters. Polymer analysis can involve many different features including detailed characterization of chemical structures and compositions as well as average molecular mass determination. It is of outstanding importance in troubleshooting of a polymer manufacturing process and for quality control, especially in biomedical applications. This review describes recent trends in the structural characterization of biodegradable materials by modern mass spectrometry (MS). It provides an overview of the analytical tools used to evaluate their degradation. Several successful applications of MALDI-TOF MS (matrix assisted laser desorption ionization

  13. Biodegradability of poly(3-hydroxybutyrate) film grafted with vinyl acetate: Effect of grafting and saponification

    Science.gov (United States)

    Wada, Yuki; Seko, Noriaki; Nagasawa, Naotsugu; Tamada, Masao; Kasuya, Ken-ichi; Mitomo, Hiroshi

    2007-06-01

    Radiation-induced graft polymerization of vinyl acetate (VAc) onto poly(3-hydroxybutyrate) (PHB) film was carried out. At a degree of grafting higher than 5%, the grafted films (PHB-g-VAc) completely lost the enzymatic degradability that is characteristic of PHB due to the grafted VAc covering the surface of the PHB film. However, the biodegradability of the PHB-g-VAc films was recovered when the films were saponified in alkali solution under optimum conditions. Graft chains of the PHB-g-VAc film reacted selectively to become biodegradable polyvinyl alcohol (PVA). The biodegradability of the saponified PHB-g-VAc film increased rapidly with time.

  14. Can you escape the beat? Modelling spatiotemporal biodegradation dynamics during periodic disturbances

    Science.gov (United States)

    König, Sara; Worrich, Anja; Wick, Lukas Y.; Miltner, Anja; Kästner, Matthias; Thullner, Martin; Centler, Florian; Banitz, Thomas; Frank, Karin

    2016-04-01

    Biodegradation of organic compounds in soil is an important microbial ecosystem service. Soil ecosystems are constantly exposed to disturbances of different spatial configurations and frequencies, challenging their ability to recover the biodegradation function. Thus, the response to these disturbances is crucial for the soil systems' biodegradation performance. The influence of spatial aspects of the disturbance regimes on long-term biodegradation dynamics under periodic disturbances has not been examined, yet. We applied a numerical simulation model considering bacterial growth, degradation, and dispersal to analyze the spatiotemporal biodegradation dynamics under disturbances occuring with different frequencies and with different spatial configurations. We found biodegradation performance decreasing in response to periodic disturbances but on average approaching a new quasi steady state. This mean performance of the disturbed systems increases with both, the interval length between disturbance events and the fragmentation of the spatial disturbance patterns. A detailed spatiotemporal analysis of degradation activity reveals that under highly fragmented disturbance patterns, biodegradation still takes place in the entire disturbed area. For moderately fragmented disturbance patterns, parts of the disturbed area become completely inactive. However, areas with high degradation activity emerge at the interface between disturbed and undisturbed areas, allowing the systems to maintain a relatively high degradation performance. Further decreasing the disturbance patterns' fragmentation, fewer interfaces between disturbed and undisturbed area and, thus, fewer active habitats occur, which reduces biodegradation performances. In additional simulations, we found that bacterial dispersal networks, as for example provided by fungal hyphae, usually increase the areas of high degradation activity and, thus, the biodegradation performance in presence of periodic disturbances

  15. Biodegradable packaging and edible coating for fresh-cut fruits and vegetables

    Directory of Open Access Journals (Sweden)

    Fernanda Galgano

    2015-03-01

    Full Text Available This work focuses on biodegradable packaging and edible coatings applied to fresh-cut fruits and vegetables and their effects on the product quality. Practical applications are mainly limited to the use of biodegradable materials that, however, do not allow full control of the product moisture loss. Better results can be achieved by the combined use of biodegradable packagings with edible coatings and recent research has shown that enrichment with silver montmorillonite nanoparticles may be a promising technique. However, the actual utilization of these materials is still limited, due to the high costs of the raw materials and the limited production.

  16. Modeling experimental findings on sorption and biodegradation of PAHs

    DEFF Research Database (Denmark)

    Rein, Arno; Smith, K. E. C.; Karlson, U. G.

    2011-01-01

    could be simulated, encompassing various soil types and PAHs, and different bacterial strains. Own experiments are currently performed on phenantrene, fluoranthene and other PAHs and on ad/desorption as well as on biodegradation. The results shall be used to calibrate and verify the new model approach......Polycyclic aromatic hydrocarbons (PAHs) in the environment are to a major degree bound to organic matter or soot particles. It is disputed whether and to which extent the adsorbed fraction of PAH in soil and sediment can be attacked by microbial enzymes, or whether dissolution in aqueous media...... is required. In that case, the degradation depends critically on the bioavailability, or better the bioaccessibility of PAH for microbes. The increasing non-accessibility of PAH with time (‘aging’) may explain the formation of a residual fraction, which has been observed in remediation projects. A unified...

  17. Micro fabrication of biodegradable polymer drug delivery devices

    DEFF Research Database (Denmark)

    Nagstrup, Johan

    The pharmaceutical industry is presently facing several obstacles in developing oral drug delivery systems. This is primarily due to the nature of the discovered drug candidates. The discovered drugs often have poor solubility and low permeability across the gastro intestinal epithelium. Furtherm...... the developed devices. Additionally, it has been shown that it is possible to control the release of drug by adding polymeric coatings........ Furthermore, they are often degraded before they can be absorbed. The result is low bioavailability of the drugs. To overcome these challenges, better drug delivery systems need to be developed. Recently, micro systems have emerged as promising candidates to solve the challenges of poor solubility, low...... permeability and degradation. These systems are for the majority based on traditional materials used in micro technology, such as SU-8, silicon, poly(methyl methacrylate). The next step in developing these new drug delivery systems is to replace classical micro fabrication materials with biodegradable polymers...

  18. Biodegradation of insecticide carbofuran by Paracoccus sp. YM3.

    Science.gov (United States)

    Peng, Xiang; Zhang, Jing S; Li, Ying Y; Li, Wen; Xu, Gang M; Yan, Yan C

    2008-09-01

    A bacterium (Paracoccus sp. YM3) capable of degrading carbofuran was isolated from carbofuran-contaminated sludge. The strain was shown to metabolize carbofuran (50 mg L(-1)) to carbofuran-7-phenol in minimal salt medium within 6 days in which the pesticide was the only source of carbon. Carbofuran and its main metabolite were analyzed by high performance liquid chromatography (HPLC). The addition of an other carbon source led to accelerated biodegradation. The relevant degrading-enzyme was intracellular and inducible. A tobacco hypersensitivity experiment showed that YM3 could eliminate carbofuran in soils effectively and safely. This is the first report of a Paracoccus sp. that could degrade carbofuran. The present study may provide a basis for biotreatment of wastewaters and bioremediation of carbofuran-contaminated soils.

  19. Kinetic Modeling of Dye Effluent Biodegradation by Pseudomonas Stutzeri

    Directory of Open Access Journals (Sweden)

    N. Rajamohan

    2013-04-01

    Full Text Available Dye industry waste water is difficult to treat because of the presence of dyes with complex aromatic structure. In this research study, the biodegradation studies of dye effluent were performed utilizing Pseudomonas stutzeri in a controlled laboratory environment under anoxic conditions. The effects of operational parameters like initial pH of the effluent and initial Chemical Oxygen Demand (COD of the effluent on percentage COD removal were studied. A biokinetic model is established giving the dependence of percentage COD removal on biomass concentration and initial COD of the effluent. The biokinetics of the COD removal was found to be first order with respect to both the microbial concentration and initial COD of the effluent. The optimal pH for better bacterial degradation was found to be 8.The specific degradation rate was found to be 0.1417 l/g Dry Cell Mass (DCM h, at 320 C.

  20. Tracking hydrocarbon plume transport and biodegradation at Deepwater Horizon.

    Science.gov (United States)

    Camilli, Richard; Reddy, Christopher M; Yoerger, Dana R; Van Mooy, Benjamin A S; Jakuba, Michael V; Kinsey, James C; McIntyre, Cameron P; Sylva, Sean P; Maloney, James V

    2010-10-08

    The Deepwater Horizon blowout is the largest offshore oil spill in history. We present results from a subsurface hydrocarbon survey using an autonomous underwater vehicle and a ship-cabled sampler. Our findings indicate the presence of a continuous plume of oil, more than 35 kilometers in length, at approximately 1100 meters depth that persisted for months without substantial biodegradation. Samples collected from within the plume reveal monoaromatic petroleum hydrocarbon concentrations in excess of 50 micrograms per liter. These data indicate that monoaromatic input to this plume was at least 5500 kilograms per day, which is more than double the total source rate of all natural seeps of the monoaromatic petroleum hydrocarbons in the northern Gulf of Mexico. Dissolved oxygen concentrations suggest that microbial respiration rates within the plume were not appreciably more than 1 micromolar oxygen per day.

  1. Degradation kinetics and metabolites in continuous biodegradation of isoprene.

    Science.gov (United States)

    Srivastva, Navnita; Singh, Ram S; Upadhyay, Siddh N; Dubey, Suresh K

    2016-04-01

    The kinetic parameters of isoprene biodegradation were studied in a bioreactor, comprising of bioscrubber and polyurethane foam packed biofilter in series and inoculated with Pseudomonas sp., using a Michaelis-Menten type model. The maximum elimination capacity, ECmax; substrate constant, Ks and ECmax/Ks values for bioscrubber were found to be 666.7 g m(-3) h(-1), 9.86 g m(-3) and 67.56 h(-1), respectively while those for biofilter were 3333 g m(-3) h(-1), 13.96 g m(-3) and 238.7 h(-1), respectively. The biofilter section exhibited better degradation efficiency compared to the bioscrubber unit. Around 62-75% of the feed isoprene got converted to carbon dioxide, indicating the efficient capability of bacteria to mineralize isoprene. The FTIR and GC-MS analyses of degradation products indicated oxidative cleavage of unsaturated bond of isoprene. These results were used for proposing a plausible degradation pathway for isoprene.

  2. Biodegradation of Tetrachlorothylene Using Methanol as Co-metabolic Substrate

    Institute of Scientific and Technical Information of China (English)

    QI YANG; HAI-TAO SHANG; HUI-DI LI; HONG-BO XI; JIAN-LONG WANG

    2008-01-01

    Objective To investigate the biodegradation of tetrachloroethylene(PCE using methanol as electron donor by acclimated anaerobic sludge.Methods HP-6890 gas chromatograph(GC),together with HP-7694 autosampler,was used to analyze the concentration of PCE and intermediates. Results PCE could be decholrinated reductively to DCE via TCE,and probably further to VC and ethylene.The degradation of PCE and TCE conformed to first-order reaction kinetics.The reaction rate constants were 0.8991 d-1and 0.068 d-1,respectively,and the corresponding half-life were 0.77d and 10.19 d,respectively.TCE production rate constant was 0.1333 d-1.showing that PCE was degraded more rapidly than TCE. Conclusion Methanol is an electron donor suitable for PCE degradation and the cometabolic electron donors are not limiting factors for PCE degradation.

  3. Reversible thermosensitive biodegradable polymeric actuators based on confined crystallization.

    Science.gov (United States)

    Stroganov, Vladislav; Al-Hussein, Mahmoud; Sommer, Jens-Uwe; Janke, Andreas; Zakharchenko, Svetlana; Ionov, Leonid

    2015-03-11

    We discovered a new and unexpected effect of reversible actuation of ultrathin semicrystalline polymer films. The principle was demonstrated on the example of thin polycaprolactone-gelatin bilayer films. These films are unfolded at room temperature, fold at temperature above polycaprolactone melting point, and unfold again at room temperature. The actuation is based on reversible switching of the structure of the hydrophobic polymer (polycaprolactone) upon melting and crystallization. We hypothesize that the origin of this unexpected behavior is the orientation of polycaprolactone chains parallel to the surface of the film, which is retained even after melting and crystallization of the polymer or the "crystallization memory effect". In this way, the crystallization generates a directed force, which causes bending of the film. We used this effect for the design of new generation of fully biodegradable thermoresponsive polymeric actuators, which are highly desirable for bionano-technological applications such as reversible encapsulation of cells and design of swimmers.

  4. Modeling biodegradation and kinetics of glyphosate by artificial neural network.

    Science.gov (United States)

    Nourouzi, Mohsen M; Chuah, Teong G; Choong, Thomas S Y; Rabiei, F

    2012-01-01

    An artificial neural network (ANN) model was developed to simulate the biodegradation of herbicide glyphosate [2-(Phosphonomethylamino) acetic acid] in a solution with varying parameters pH, inoculum size and initial glyphosate concentration. The predictive ability of ANN model was also compared with Monod model. The result showed that ANN model was able to accurately predict the experimental results. A low ratio of self-inhibition and half saturation constants of Haldane equations (glyphosate on bacteria growth. The value of K(i)/K(s) increased when the mixed inoculum size was increased from 10(4) to 10(6) bacteria/mL. It was found that the percentage of glyphosate degradation reached a maximum value of 99% at an optimum pH 6-7 while for pH values higher than 9 or lower than 4, no degradation was observed.

  5. Biodegradable Plastic-degrading Activity of Various Species of Paraphoma.

    Science.gov (United States)

    Koitabashi, Motoo; Sameshima-Yamashita, Yuka; Koike, Hideaki; Sato, Toyozo; Moriwaki, Jouji; Morita, Tomotake; Watanabe, Takashi; Yoshida, Shigenobu; Kitamoto, Hiroko

    2016-07-01

    The fungal strain B47-9, isolated from barley, was previously selected as an effective degrader of various biodegradable plastic (BP) films such as poly(butylene succinate-co-adipate) (PBSA) and poly(butylene succinate) (PBS). The strain has not been identified based on mycological methods because it does not form fruiting bodies, which are the key to morphological identification. Here, we performed molecular phylogenetic analyses of the nuclear ribosomal RNA gene regions and their internal transcribed spacer region of B47-9 and related fungi. The results suggest that B47-9 is closely related to the genus Paraphoma. Investigation of the abilities of six strains belonging to the genus Paraphoma to degrade BPs indicated that all strains could degrade PBSA and PBS films to varying degrees. Based on our approach, we conclude that strain B47-9 is a species belonging to the genus Paraphoma.

  6. Performance of Biodegradable Polymers used in Mechanically Loaded Implants

    DEFF Research Database (Denmark)

    Andersen, Lonnie Ulrich

    to be oriented in a 45° angle to the direction of deformation. From the model the initial strain region was predicted to lie between 35-40%, and the tensile force that the fabric can withstand, without going into plastic deformation was between 2000-5000 N. From the analysis and the material tests it was found...... predisposing for early dislocation have not been completely established, making it difficult to take successful preventative measures. The objective of this PhD thesis was to design an implantable, biodegradable device to guard against these dislocations. The hip dislocation preventer should allow for easy...... adaptation, and mounting onto most types of hip implants, without changing the basic design of the present implant. The objective is to have a structure, which will put a restrain on the artificial hip implant as it moves into the extreme positions associated with dislocation, without further affecting...

  7. Biodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications

    CERN Document Server

    Wang, G -J; Hsueh, C -C

    2008-01-01

    In this research, we present a simple and cost effective soft lithographic process to fabricate PLA scaffolds for tissue engineering. In which, the negative photoresist JSR THB-120N was spun on a glass subtract followed by conventional UV lithographic processes to fabricate the master to cast the PDMS elastomeric mold. A thin poly(vinyl alcohol) (PVA) layer was used as a mode release such that the PLA scaffold can be easily peeled off. The PLA precursor solution was then cast onto the PDMS mold to form the PLA microstructures. After evaporating the solvent, the PLA microstructures can be easily peeled off from the PDMS mold. Experimental results show that the desired microvessels scaffold can be successfully transferred to the biodegradable polymer PLA.

  8. Biodegradation of crude oil dispersions by marine bacteria

    Science.gov (United States)

    Juarez, Gabriel; Fernandez, Vicente; Stocker, Roman

    2016-11-01

    Dispersants are used to break up marine oil slicks and increase the available surface area for bacteria to degrade oil hydrocarbons. However, this common view neglects key elements of the microscale interactions between bacteria and oil droplets, namely encounters and growth. Utilizing experimental observations of bacteria colonizing oil droplets, we model the interactions affecting hydrocarbon consumption between a collection of oil droplets with varying sizes and a single bacterial pool. The results show that degradation time is minimized for intermediate droplet sizes and that reducing droplet size too much can lead to years in increased degradation time. This mechanical model provides a baseline for understanding oil biodegradation and mitigation strategies in open marine systems.

  9. Characterization of biodegradable polymers irradiated with swift heavy ions

    Energy Technology Data Exchange (ETDEWEB)

    Salguero, N.G. [Gerencia de Investigacion y Aplicaciones, TANDAR-CNEA, Av. Gral. Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina); Grosso, M.F. del, E-mail: delgrosso@tandar.cnea.gov.ar [Gerencia de Investigacion y Aplicaciones, TANDAR-CNEA, Av. Gral. Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina); CONICET, Av. Rivadavia 1917 C1033AAJ CABA (Argentina); Duran, H. [CONICET, Av. Rivadavia 1917 C1033AAJ CABA (Argentina); Gerencia de Desarrollo Tecnologico y Proyectos Especiales, CNEA, Av. Gral. Paz 1499 (B1650KNA) San Mart Latin-Small-Letter-Dotless-I Acute-Accent n, Buenos Aires (Argentina); Escuela de Ciencia y Tecnologia, H. Yrigoyen 3100, CP 1650, San Martin, UNSAM (Argentina); Peruzzo, P.J. [CICPBA - Grupo de Materiales y Nanomateriales Polimericos, Instituto de Investigaciones Fisicoquimicas Teoricas y Aplicadas (INIFTA), CCT La Plata CONICET - Universidad Nacional de La Plata, La Plata (Argentina); Amalvy, J.I. [CICPBA - Grupo de Materiales y Nanomateriales Polimericos, Instituto de Investigaciones Fisicoquimicas Teoricas y Aplicadas (INIFTA), CCT La Plata CONICET - Universidad Nacional de La Plata, La Plata (Argentina); Facultad de Ingenieria, Universidad Nacional de La Plata, Calle 116 y 48 (B1900TAG), La Plata (Argentina); Departamento de Ingenieria Quimica, Facultad Regional La Plata, Universidad Tecnologica Nacional, 60 y 124 (1900), La Plata (Argentina); and others

    2012-02-15

    In view of their application as biomaterials, there is an increasing interest in developing new methods to induce controlled cell adhesion onto polymeric materials. The critical step in all these methods involves the modification of polymer surfaces, to induce cell adhesion, without changing theirs degradation and biocompatibility properties. In this work two biodegradable polymers, polyhydroxybutyrate (PHB) and poly-L-lactide acid (PLLA) were irradiated using carbon and sulfur beams with different energies and fluences. Pristine and irradiated samples were degradated by immersion in a phosphate buffer at pH 7.0 and then characterized. The analysis after irradiation and degradation showed a decrease in the contact angle values and changes in their crystallinity properties.

  10. Flow, Transport and Biodegradation of Toluene During Bioventing

    Institute of Scientific and Technical Information of China (English)

    隋红; 徐世民; 李鑫钢; 姜斌; 黄国强

    2004-01-01

    Bioventing is conducted on one-dimensional soil columns. A numerical model is developed for simulating the mass exchange, adivective and dispersive transport and biodegradation of toluene. The model parameters are estimated independently through laboratory batch experiments, or from literature. Simulations are found to provide reasonable agreement with experimental data. Experimental results show that toluene removal due to biodegradiation is more important at the later stage. The total cleanup time when NAPL (non-aqueous phase liquid) phase exists was twice more than that without NAPL. Sensitivity analysis of parameters suggests that model predictions are mainly dependent on mass transfer coefficient and microbial parameters, such as the half-saturation coefficient and maximum specific substrate utilization rate.

  11. Biodegradable and Biocompatible Systems Based on Hydroxyapatite Nanoparticles

    Directory of Open Access Journals (Sweden)

    Pau Turon

    2017-01-01

    Full Text Available Composites of hydroxyapatite (HAp are widely employed in biomedical applications due to their biocompatibility, bioactivity and osteoconductivity properties. In fact, the development of industrially scalable hybrids at low cost and high efficiency has a great impact, for example, on bone tissue engineering applications and even as drug delivery systems. New nanocomposites constituted by HAp nanoparticles and synthetic or natural polymers with biodegradable and biocompatible characteristics have constantly been developed and extensive works have been published concerning their applications. The present review is mainly focused on both the capability of HAp nanoparticles to encapsulate diverse compounds as well as the preparation methods of scaffolds incorporating HAp. Attention has also been paid to the recent developments on antimicrobial scaffolds, bioactive membranes, magnetic scaffolds, in vivo imaging systems, hydrogels and coatings that made use of HAp nanoparticles.

  12. Evaluation of Biodegradability of Waste Before and After Aerobic Treatment

    Directory of Open Access Journals (Sweden)

    Suchowska-Kisielewicz Monika

    2014-12-01

    Full Text Available An important advantage of use of an aerobic biostabilization of waste prior to its disposal is that it intensifies the decomposition of the organic fraction of waste into the form which is easily assimilable for methanogenic microorganisms involved in anaerobic decomposition of waste in the landfill. In this article it is presented the influence of aerobic pre-treatment of waste as well as leachate recirculation on susceptibility to biodegradation of waste in anaerobic laboratory reactors. The research has shown that in the reactor with aerobically treated waste stabilized with recilculation conversion of the organic carbon into the methane is about 45% higher than in the reactor with untreated waste stabilized without recirculation.

  13. Marine biofouling resistance of polyurethane with biodegradation and hydrolyzation.

    Science.gov (United States)

    Xu, Wentao; Ma, Chunfeng; Ma, Jielin; Gan, Tiansheng; Zhang, Guangzhao

    2014-03-26

    We have prepared polyurethane with poly(ε-caprolactone) (PCL) as the segments of the main chain and poly(triisopropylsilyl acrylate) (PTIPSA) as the side chains by a combination of radical polymerization and a condensation reaction. Quartz crystal microbalance with dissipation studies show that polyurethane can degrade in the presence of enzyme and the degradation rate decreases with the PTIPSA content. Our studies also demonstrate that polyurethane is able to hydrolyze in artificial seawater and the hydrolysis rate increases as the PTIPSA content increases. Moreover, hydrolysis leads to a hydrophilic surface that is favorable to reduction of the frictional drag under dynamic conditions. Marine field tests reveal that polyurethane has good antifouling ability because polyurethane with a biodegradable PCL main chain and hydrolyzable PTIPSA side chains can form a self-renewal surface. Polyurethane was also used to carry and release a relatively environmentally friendly antifoulant, and the combined system exhibits a much higher antifouling performance even in a static marine environment.

  14. Biodegradable magnesium nanoparticle-enhanced laser hyperthermia therapy

    Directory of Open Access Journals (Sweden)

    Wang Q

    2012-08-01

    Full Text Available Qian Wang,1 Liping Xie,1 Zhizhu He,2 Derui Di,2 Jing Liu1,21Department of Biomedical Engineering, School of Medicine, Tsinghua University, 2Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, People's Republic of ChinaBackground: Recently, nanoparticles have been demonstrated to have tremendous merit in terms of improving the treatment specificity and thermal ablation effect on tumors. However, the potential toxicity and long-term side effects caused by the introduced nanoparticles and by expelling them out of the body following surgery remain a significant challenge. Here, we propose for the first time to directly adopt magnesium nanoparticles as the heating enhancer in laser thermal ablation to avoid these problems by making full use of the perfect biodegradable properties of this specific material.Methods: To better understand the new nano “green” hyperthermia modality, we evaluated the effects of magnesium nanoparticles on the temperature transients inside the human body subject to laser interstitial heating. Further, we experimentally investigated the heating enhancement effects of magnesium nanoparticles on a group of biological samples: oil, egg white, egg yolk, in vitro pig tissues, and the in vivo hind leg of rabbit when subjected to laser irradiation.Results: Both the theoretical simulations and experimental measurements demonstrated that the target tissues injected with magnesium nanoparticles reached much higher temperatures than tissues without magnesium nanoparticles. This revealed the enhancing behavior of the new nanohyperthermia method.Conclusion: Given the unique features of magnesium nanoparticles – their complete biological safety and ability to enhance heating – which most other advanced metal nanoparticles do not possess, the use of magnesium nanoparticles in hyperthermia therapy offers an important “green” nanomedicine modality for treating tumors

  15. Soil slurry reactors for the assessment of contaminant biodegradation

    Science.gov (United States)

    Toscano, G.; Colarieti, M. L.; Greco, G.

    2012-04-01

    Slurry reactors are frequently used in the assessment of feasibility of biodegradation in natural soil systems. The rate of contaminant removal is usually quantified by zero- or first-order kinetics decay constants. The significance of such constants for the evaluation of removal rate in the field could be questioned because the slurry reactor is a water-saturated, well-stirred system without resemblance with an unsaturated fixed bed of soil. Nevertheless, a kinetic study with soil slurry reactors can still be useful by means of only slightly more sophisticated kinetic models than zero-/first-order decay. The use of kinetic models taking into account the role of degrading biomass, even in the absence of reliable experimental methods for its quantification, provides further insight into the effect of nutrient additions. A real acceleration of biodegradation processes is obtained only when the degrading biomass is in the growth condition. The apparent change in contaminant removal course can be useful to diagnose biomass growth without direct biomass measurement. Even though molecular biology techniques are effective to assess the presence of potentially degrading microorganism in a "viable-but-nonculturable" state, the attainment of conditions for growth is still important to the development of enhanced remediation techniques. The methodology is illustrated with reference to data gathered for two test sites, Oslo airport Gardermoen in Norway (continuous contamination by aircraft deicing fluids) and the Trecate site in Italy (aged contamination by crude oil spill). This research is part of SoilCAM project (Soil Contamination, Advanced integrated characterisation and time-lapse Monitoring 2008-2012, EU-FP7).

  16. Magnetic Susceptibility Measurements as a Proxy for Hydrocarbon Biodegradation

    Science.gov (United States)

    Mewafy, F.; Atekwana, E. A.; Slater, L. D.; Werkema, D.; Revil, A.; Ntarlagiannis, D.; Skold, M.

    2011-12-01

    Magnetic susceptibility (MS) measurements have been commonly used in paleoclimate studies, as a proxy for environmental pollution such as heavy metal contamination, and for delineating zones of oil seeps related to hydrocarbon exploration. Few studies have assessed the use of MS measurements for mapping zones of oil pollution. In this study, we investigated the variation in magnetic susceptibility across a hydrocarbon contaminated site undergoing biodegradation. Our objective was to investigate if MS measurements could be used as a proxy indicator of intrinsic bioremediation linked to the activity of iron reducing bacteria. An improved understanding of the mechanisms generating geophysical signatures associated with microbial enzymatic activity could permit the development of geophysical imaging technologies for long-term, minimally invasive and sustainable monitoring of natural biodegradation at oil spill sites. We used a Bartington MS probe to measure MS data along fifteen boreholes within contaminated (both free phase and dissolved phase hydrocarbon plumes) and clean areas. Our results show the following: (1) an enhanced zone of MS straddling the water table at the contaminated locations, not observed at the clean locations; (2) MS values within the free product plume are higher compared to values within the dissolved product plume; (3) the MS values within the vadoze zone above the free product plume are higher compared to values within the dissolved product plume; 4) the zone of high MS is thicker within the free product plume compared to the dissolved product plume. We suggest that the zone of enhanced MS results from the precipitation of magnetite related to the oxidation of the hydrocarbons coupled to iron reduction. Our data documents a strong correlation between MS and hydrocarbon concentration. We conclude that recognition of these zones of enhanced magnetite formation allows for the application of MS measurements as a: (1) low cost, rapid monitoring

  17. Aerobic biodegradation of organic compounds in hydraulic fracturing fluids.

    Science.gov (United States)

    Kekacs, Daniel; Drollette, Brian D; Brooker, Michael; Plata, Desiree L; Mouser, Paula J

    2015-07-01

    Little is known of the attenuation of chemical mixtures created for hydraulic fracturing within the natural environment. A synthetic hydraulic fracturing fluid was developed from disclosed industry formulas and produced for laboratory experiments using commercial additives in use by Marcellus shale field crews. The experiments employed an internationally accepted standard method (OECD 301A) to evaluate aerobic biodegradation potential of the fluid mixture by monitoring the removal of dissolved organic carbon (DOC) from an aqueous solution by activated sludge and lake water microbial consortia for two substrate concentrations and four salinities. Microbial degradation removed from 57 % to more than 90 % of added DOC within 6.5 days, with higher removal efficiency at more dilute concentrations and little difference in overall removal extent between sludge and lake microbe treatments. The alcohols isopropanol and octanol were degraded to levels below detection limits while the solvent acetone accumulated in biological treatments through time. Salinity concentrations of 40 g/L or more completely inhibited degradation during the first 6.5 days of incubation with the synthetic hydraulic fracturing fluid even though communities were pre-acclimated to salt. Initially diverse microbial communities became dominated by 16S rRNA sequences affiliated with Pseudomonas and other Pseudomonadaceae after incubation with the synthetic fracturing fluid, taxa which may be involved in acetone production. These data expand our understanding of constraints on the biodegradation potential of organic compounds in hydraulic fracturing fluids under aerobic conditions in the event that they are accidentally released to surface waters and shallow soils.

  18. Biodegradation of chrysene by isolated bacteria in contaminated soils; Biodegradation du chrysene par des bacteries isolee de sols contamines

    Energy Technology Data Exchange (ETDEWEB)

    Menard, P.A.; Bisaillon, J.G.; Lepine, F.; Paquette, G. [Institut Armand Frappier, Laval, PQ (Canada)

    1997-12-31

    Results of a study on the destruction of chrysene in soils by microbial biotreatment were presented. Chrysene is a member of the polycyclic aromatic hydrocarbons (PAHs) that is a toxic and carcinogen substance often found in petroleum residues. Biotreatment is an effective method for the destruction of PAHs such as fluorene and phenanthrene that have 2 or 3 aromatic cycles. PAHs with 4 or more cycles such as chrysene and pyrene are, however, difficult to destroy by biotreatment methods, principally because of their very low solubility in water. Tests were done using the bacteria Sphingomonas S107 and Pseudomonas aeruginosa to biodegrade chrysene. Further studies will focus on the degradation kinetics of chrysene. 7 figs.

  19. Biodegradation pattern of hydrocarbons from a fuel oil-type complex residue by an emulsifier-producing microbial consortium.

    Science.gov (United States)

    Nievas, M L; Commendatore, M G; Esteves, J L; Bucalá, V

    2008-06-15

    The biodegradation of a hazardous waste (bilge waste), a fuel oil-type complex residue from normal ship operations, was studied in a batch bioreactor using a microbial consortium in seawater medium. Experiments with initial concentrations of 0.18 and 0.53% (v/v) of bilge waste were carried out. In order to study the biodegradation kinetics, the mass of n-alkanes, resolved hydrocarbons and unresolved complex mixture (UCM) hydrocarbons were assessed by gas chromatography (GC). Emulsification was detected in both experiments, possibly linked to the n-alkanes depletion, with differences in emulsification start times and extents according to the initial hydrocarbon concentration. Both facts influenced the hydrocarbon biodegradation kinetics. A sequential biodegradation of n-alkanes and UMC was found for the higher hydrocarbon content. Being the former growth associated, while UCM biodegradation was a non-growing process showing enzymatic-type biodegradation kinetics. For the lower hydrocarbon concentration, simultaneous biodegradation of n-alkanes and UMC were found before emulsification. Nevertheless, certain UCM biodegradation was observed after the medium emulsification. According to the observed kinetics, three main types of hydrocarbons (n-alkanes, biodegradable UCM and recalcitrant UCM) were found adequate to represent the multicomponent substrate (bilge waste) for future modelling of the biodegradation process.

  20. Evaluation of the effects of nanoscale zero-valent iron (nZVI) dispersants on intrinsic biodegradation of trichloroethylene (TCE).

    Science.gov (United States)

    Chang, Y C; Huang, S C; Chen, K F

    2014-01-01

    In this study, the biodegradability of nanoscale zero-valent iron (nZVI) dispersants and their effects on the intrinsic biodegradation of trichloroethylene (TCE) were evaluated. Results of a microcosm study show that the biodegradability of three dispersants followed the sequence of: polyvinyl alcohol-co-vinyl acetate-co-itaconic acid (PV3A) > polyoxyethylene (20) sorbitan monolaurate (Tween 20) > polyacrylic acid (PAA) under aerobic conditions, and PV3A > Tween 20 > PAA under anaerobic conditions. Natural biodegradation of TCE was observed under both aerobic and anaerobic conditions. No significant effects were observed on the intrinsic biodegradation of TCE under aerobic conditions with the presence of the dispersants. The addition of PAA seemed to have a slightly adverse impact on anaerobic TCE biodegradation. Higher accumulation of the byproducts of anaerobic TCE biodegradation was detected with the addition of PV3A and Tween 20. The diversity of the microbial community was enhanced under aerobic conditions with the presence of more biodegradable PV3A and Tween 20. The results of this study indicate that it is necessary to select an appropriate dispersant for nZVI to prevent a residual of the dispersant in the subsurface. Additionally, the effects of the dispersant on TCE biodegradation and the accumulation of TCE biodegrading byproducts should also be considered.

  1. A BIODEGRADABLE RUBBER BY CROSS-LINKING POLY(HYDROXYALKANOATE) FROM PSEUDOMONAS-OLEOVORANS

    NARCIS (Netherlands)

    DEKONING, GJM; VANBILSEN, HMM; LEMSTRA, PJ; HAZENBERG, W; WITHOLT, B; PREUSTING, H; VANDERGALIEN, JG; SCHIRMER, A; JENDROSSEK, D

    1994-01-01

    Poly((R)-3-hydroxyalkanoate)s (PHAs) are bacterial storage polyesters, currently receiving much attention because of their potential application as biodegradable and biocompatible plastics. Among them are the PHAs from Pseudomonas oleovorans, which are semicrystalline elastomers. Their applicability

  2. BIODEGRADATION OF SEDIMENT-BOUND PAHS IN FIELD-CONTAMINATED SEDIMENT

    Science.gov (United States)

    The biodegradation of polycyclic aromatic hydrocarbons (PAHs) has been reported to occur under aerobic, sulfate reducing, and denitrifying conditions. PAHs present in contaminated sites, however, are known for their persistence. Most published studies were conducted in systems wh...

  3. Anaerobic biodegradation of fluoranthene under methanogenic conditions in presence of surface-active compounds

    DEFF Research Database (Denmark)

    Fuchedzhieva, Nadezhda; Karakashev, Dimitar Borisov; Angelidaki, Irini

    2008-01-01

    biodegradation was most likely as a result of the increased fluoranthene solubility. The results indicate that LAS can be considered as a promising agent for facilitation of the process of anaerobic polycyclic aromatic hydrocarbons (PAH) biodegradation under methanogenic conditions.......Bacillus cereus isolated from municipal wastewater treatment plant was used as a model strain to assess the efficiency of two anionic surfactants, a chemical surfactant and a biosurfactant during fluoranthene biodegradation under anaerobic methanogenic conditions. The surfactants selected...... for the study were linear alkyl benzene sulphonates (LAS) and rhamnolipid-biosurfactant complex from Pseudomonas sp. PS-17. Biodegradation of fluoranthene was monitored by GC/MS for a period up to 12th day. No change in the fluoranthene concentration was registered after 7th day. The presence of LAS enhanced...

  4. MULTISUBSTRATE BIODEGRADATION KINETICS FOR BINARY AND COMPLEX MIXTURES OF POLYCYCLIC AROMATIC HYDROCARBONS

    Science.gov (United States)

    Biodegradation kinetics were studied for binary and complex mixtures of nine polycyclic aromatic hydrocarbons (PAHs): naphthalene, 1-methylnaphthalene, 2-methylnaphthalene, 2-ethylnaphthalene, phenanthrene, anthracene, pyrene, fluorene and fluoranthene. Discrepancies between the ...

  5. Advanced drug and gene delivery systems based on functional biodegradable polycarbonates and copolymers

    NARCIS (Netherlands)

    Chen, Wei; Meng, F.; Cheng, R.; Deng, C.; Feijen, J.; Zhong, Z.

    2014-01-01

    Biodegradable polymeric nanocarriers are one of the most promising systems for targeted and controlled drug and gene delivery. They have shown several unique advantages such as excellent biocompatibility, prolonged circulation time, passive tumor targeting via the enhanced permeability and retention

  6. Biodegradability of terephthalic acid in terylene artificial silk printing and dyeing wastewater

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    As the characteristic pollutant, terephthalic acid(TA)was in charge of 40%-78% of the total COD of terylene artificial silk printing and dyeing wastewater(TPW-water). The studies on biodegradability of TA were conducted in a serial of activated sludge reactors with TPW-water. TA appeared to be readily biodegradable with removal efficiency over 96.5% under aerobic conditions, hardly biodegradable with removal efficiency below 10% under anoxic conditions and slowly biodegradable with a turnover between 31.4% and 56.0% under anaerobic conditions. TA also accounted for the majority of BOD in TPW-water. The process combined by anoxic, anaerobic and aerobic activated sludge reactor was suitable for TA degradation and TPW-water treatment. Further, the aerobic process was essentially much more effective than the anaerobic or anoxic one to degrade TA in TPW-water.

  7. Using the biomarker bonded on the asphaltenes for biodegraded oil-source correlation

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Ruthenium-ion-catalyzed oxidation (RICO) has been used to investigate asphaltenes from three oils with the same origin in the Juquan Basin and three oils with the same origin but with different degree of biodegradation in the Turpan Basin, Northwest China. The preliminary results showed that the biomarkers bonded on the asphaltenes with the same origin is similar and is correlated with the free biomarker in saturates. The bonded biomarkers have no relationship with the biodegradation. An application on the severely biodegraded oils is reported here. The biomarker and benzenecarboxylic methyl esters reflecting the structure of the asphaltenes after RICO should provide a new way for oil-source correlation and it should be specially useful for severely biodegraded oil-source correlation.

  8. Quantitative structure-activity relationship study on the biodegradation of acid dyestuffs

    Institute of Scientific and Technical Information of China (English)

    LI Yin; XI Dan-li

    2007-01-01

    Quantitative structure-biodegradability relationships (QSBRs) were established to develop predictive models and mechanistic explanations for acid dyestuffs as well as biological activities. With a total of four descriptors, molecular weight (MW), energies of the highest occupied molecular orbital (EHOMO), the lowest unoccupied molecular orbital (ELUMO), and the excited state (EES), calculated using quantum chemical semi-empirical methodology, a series of models were analyzed between the dye biodegradability and each descriptor. Results showed that EHOMO and MW were the dominant parameters controlling the biodegradability of acid dyes. A statistically robust QSBR model was developed for all studied dyes, with the combined application of EHOMO and MW. The calculated biodegradations fitted well with the experimental data monitored in a facultative-aerobic process, indicative of the reliable prediction and mechanistic character of the developed model.

  9. β-Cyclodextrin and its derivatives-enhanced solubility and biodegradation of 2-nitrobiphenyl

    Institute of Scientific and Technical Information of China (English)

    CAI Bang-cheng; GAO Shi-xiang; LU Gen-fa

    2006-01-01

    This paper investigated the effects of β-cyclodextrins (β-CD) and its two derivatives, hydroxypropyl-β-cyclodextrin (HPCD) and carboxymethyl-β-cyclodextrin (CMCD), on the solubility and biodegradation of 2-nitrophenyl by aa Acinetbacter sp.Results showed that β-CD ,HPCD and CMCD could not be utilized by Acinetbacter sp. as sole carbon source and none of the CDs had toxic effects on the growth of the bacteria in the experiments; all the CDs could enhance the apparent solubility and accelerate the biodegradation of 2-nitrobipheny. It showed that biodegradation-accelerating effects of CDs on 2-nitrobiphenyl were correlated with their solubility-enhancing effects. Among three CDs investigated,CMCD had the most obvious effects both on the apparent solubility and the biodegradation, followed by β-CD and HPCD.

  10. Primary biodegradation of veterinary antibiotics in aerobic and anaerobic surface water simulation systems

    DEFF Research Database (Denmark)

    Ingerslev, Flemming; Toräng, Lars; Loke, M.-L.

    2001-01-01

    The primary aerobic and anaerobic biodegradability at intermediate concentrations (50-5000 mug/l) of the antibiotics olaquindox (OLA), metronidazole (MET), tylosin (TYL) and oxytetracycline (OTC) was studied in a simple shake flask system simulating the conditions in surface waters. The purpose...... of the study was to provide rate data for primary biodegradation in the scenario where antibiotics pollute surface waters as a result of run-off from arable land. The source of antibiotics may be application of manure as fertilizer or excreta of grazing animals. Assuming first-order degradation kinetics...... substances. The biodegradation behaviour was influenced by neither the concentrations of antibiotics nor the time of the year and location for sampling of surface water. Addition of 1 g/l of sediment or 3 mg/l of activated sludge from wastewater treatment increased the biodegradation potential which...

  11. Modelling as a tool when interpreting biodegradation of micro pollutants in activated sludge systems

    DEFF Research Database (Denmark)

    Press-Kristensen, Kåre; Lindblom, Erik Ulfson; Henze, Mogens

    2007-01-01

    The aims of the present work were to improve the biodegradation of the endocrine disrupting micro pollutant, bisphenol A (BPA), used as model compound in an activated sludge system and to underline the importance of modelling the system. Previous results have shown that BPA mainly is degraded under...... aerobic conditions. Therefore the aerobic phase time in the BioDenitro process of the activated sludge system was increased from 50% to 70%. The hypothesis was that this would improve the biodegradation of BPA. Both the influent and the effluent concentrations of BPA in the experiment dropped...... probably was caused by either a larger specific biomass to influent BPA ratio, improved biodegradation related to the increased aerobic phase time, or a combination of the two. Thereby it was not possibly to determine if the increase in aerobic phase time improved the biodegradation of BPA. The work...

  12. HOW DO DEGRADABLE/BIODEGRADABLE PLASTIC MATERIALS DECOMPOSE IN HOME COMPOSTING ENVIRONMENT?

    Directory of Open Access Journals (Sweden)

    Magdalena Vaverková

    2014-10-01

    Full Text Available This paper provides information about biodegradability of polymeric (biodegradable/degradable materials advertised as 100%-degradable or certified as compostable, which may be a part of biodegradable waste, in home composting conditions. It describes an experiment that took place in home wooden compost bins and contained 9 samples that are commonly available in retail chains in the Czech Republic and Poland. The experiment lasted for the period of 12 weeks. Based on the results thereof it can be concluded that polyethylene samples with additive (samples 2, 4, 7 have not decomposed, their color has not changed and that no degradation or physical changes have occurred. Samples 1, 3 and 5 certified as compostable have not decomposed. Sample 6 exhibited the highest decomposition rate. Samples 8, 9 (tableware exhibited high degree of decomposition. The main conclusion from this study is that degradable/biodegradable plastics or plastics certified as compostable are not suitable for home composting.

  13. A biodegradable rubber by crosslinking poly(hydroxyalkanoate) from Pseudomonas oleovorans

    NARCIS (Netherlands)

    DEKONING, GJM; VANBILSEN, HMM; LEMSTRA, PJ; HAZENBERG, W; Witholt, B.; Preusting, H.; VANDERGALIEN, JG; SCHIRMER, A; JENDROSSEK, D

    1994-01-01

    Poly((R)-3-hydroxyalkanoate)s (PHAs) are bacterial storage polyesters, currently receiving much attention because of their potential application as biodegradable and biocompatible plastics. Among them are the PHAs from Pseudomonas oleovorans, which are semicrystalline elastomers. Their applicability

  14. Biodegradation of phenol: a comparative study with and without applying magnetic fields.

    Science.gov (United States)

    Jung, J; Sanji, B; Godbole, S; Sofer, S

    1993-01-01

    The objective of this work was to study the effect of magnetic fields on the rate of phenol biodegradation using immobilized activated sludge. A recirculation flow bioreactor employing immobilized bacterial beads was used with phenol as the substrate to study the biodegradation process. This study was conducted by applying separately the north pole and the south pole magnetic fields to the bioreactor. Rate of dissolved oxygen consumption, phenol concentration and extracellular protein concentration were the parameters monitored during the process. It was observed that by applying a magnetic south pole to the process, biodegradation in the form of biological oxidation was enhanced. A 30% increase in biodegradation rate was obtained by applying a magnetic south pole of strength of 0.45 Tesla to the bioreactor with immobilized microbial beads as compared to the control. Magnetic north pole irradiation inhibited this type of biooxidation. This process has potential for biological treatment of organic wastes.

  15. Characteristics of electricity generation and biodegradation in tidal river sludge-used microbial fuel cells.

    Science.gov (United States)

    Touch, Narong; Hibino, Tadashi; Nagatsu, Yoshiyuki; Tachiuchi, Kouhei

    2014-04-01

    The electricity generation behavior of microbial fuel cell (MFC) using the sludge collected from the riverbank of a tidal river, and the biodegradation of the sludge by the electricity generation are evaluated. Although the maximum current density (150-300 mA/m(2)) was higher than that of MFC using freshwater sediment (30 mA/m(2)), the output current was greatly restricted by the mass transfer limitation. However, our results also indicate that placing the anode in different locations in the sludge could reduce the mass transfer limitation. After approximately 3 months, the removal efficiency of organic carbon was approximately 10%, demonstrated that MFC could also enhance the biodegradation of the sludge by nearly 10-fold comparing with the natural biodegradation. We also found that the biodegradation could be identified by the behavior of oxygen consumption of the sludge. Importantly, the oxygen consumption of the sludge became higher along with the electricity generation.

  16. Sustainable hybrid photocatalysts: titania immobilized on carbon materials derived from renewable and biodegradable resources

    Science.gov (United States)

    This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientifi...

  17. Biodegradation of trace pharmaceutical substances in wastewater by a membrane bioreactor

    Institute of Scientific and Technical Information of China (English)

    Longli BO; Taro URASE; Xiaochang WANG

    2009-01-01

    The biodegradation of selected pharmaceutical micropollutants, including two pharmaceuticals with argued biodegradation, was studied by a lab-scale membrane bioreactor. The reaction kinetics and affecting factors were also investigated in this paper. Clofibric acid (CA) with contradictive biodegradation reported was degraded almost completely at different hydraulic retention times (HRTs) after adaptation to microorganisms. The biodegradation of CA was disturbed at low pH operation,while the activity of microorganisms recovered again after pH adjustment to neutral condition. Ibuprofen (IBP)degraded under neutral and acidic conditions. Removals of IBP and CA were zero-order and first-order reactions under high and low initial concentrations, respectively. Carbamazepine and diclofenac were not degraded regardless of HRTs and pH.

  18. Morphological and biodegradability studies of Euphorbia latex modified polyester - Banana fiber composites

    Science.gov (United States)

    Rai, Bhuvneshwar; Kumar, Gulshan; Diwan, R. K.

    2016-05-01

    The composites of Banana fiber were prepared using polyester resin blended Euphorbia coagulum, morphology and the degree of rate of aerobic biodegradation of the prepared composites were studied. Polyester resin blended Euphorbia coagulum containing Banana fiber, Euphorbia coagulum and polyester resin taken in the ratio 40: 24: 36 was used for the study, which was the optimum composition of the composite reported in a previous study by the authors. In the biodegradability study cellulose has been used as positive reference material. Result shows that Euphorbia coagulum modified polyester - Banana fiber composites exhibited biodegradation to the extent of around 40%. The use of developed green composites may help in reducing the generation of non-biodegradable polymeric wastes.

  19. Lichen Permelia perlata: a novel system for biodegradation and detoxification of disperse dye Solvent Red 24.

    Science.gov (United States)

    Kulkarni, Ashwini N; Kadam, Avinash A; Kachole, Manvendra S; Govindwar, Sanjay P

    2014-07-15

    Lichen is a self-supporting symbiotic association of fungi and algae which was not yet explored for its bioremediation potential. Lichen Permelia perlata showed potential of decolorization and biodegradation of Solvent Red 24 (SR24). Optimum pH and temperature for decolorization was found to be 8 and 50°C, respectively. Induction in the activity of laccase in P. perlata during biodegradation of SR24 showed their involvement. HPTLC, FTIR and GC-HRMS analysis confirmed biodegradation of SR24 in to metabolites such as naphthalen-1-yldiazene, naphthalene, 1-(2-methylphenyl)-2-phenyldiazene and diphenyldiazene. Phytotoxicity and genotoxicity analysis revealed the reduction in toxicity of SR24 after its biodegradation.

  20. INHIBITION OF ALKYLBENZENE BIODEGRADATION UNDER DENITRIFYING CONDITIONS BY USING THE ACETYLENE BLOCK TECHNIQUE

    Science.gov (United States)

    Addition of acetylene to microcosms simultaneously amended with nitrate and alkylbenzenes resulted in inhibition of the rate of alkylbenzene biodegradation under denitrifying conditions. Toluene, xylenes, and 1,2,4-trimethylbenzene were recalcitrant, whereas ethylbenzene was degr...