WorldWideScience

Sample records for berkelium fluorides

  1. Fluoride

    Science.gov (United States)

    ... prescribed for children and adults whose homes have water that is not fluoridated (already has fluoride added). ... call your doctor immediately: unusual increase in saliva salty or soapy taste stomach pain upset stomach vomiting ...

  2. Fluoridation Basics

    Science.gov (United States)

    ... Page Basic Information About Fluoride Benefits: Strong Teeth History of Fluoride in Water Cost: Saves Money, Saves Teeth Fluoride in the Water Today The mineral fluoride occurs naturally on earth and is released from rocks into the soil, ...

  3. Bottled Water and Fluoride

    Science.gov (United States)

    ... Fluoridation Journal Articles for Community Water Fluoridation Bottled Water Recommend on Facebook Tweet Share Compartir Consumers drink ... questions about bottled water and fluoride. Does bottled water contain fluoride? Bottled water products may contain fluoride, ...

  4. Environmental fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Marier, J.R.; Rose, D.

    1971-01-01

    Modern-day man is probably exposed to more environmental fluoride than was heretofore suspected, and consideration must be given to the total ingestion from various sources as well as the types of fluoride present in air, foods, beverages, and other commodities. An effort should also be made to study the symptomology of chronic fluorine intoxication, especially the early non-skeletal manifestations of arthritic-like symptoms that may be complicated by metabolic and/or nutritional inadequacies. Finally, it must be emphasized again that dental fluorosis (i.e. mottling) will only be seen in subjects who have been exposed to fluoride during the time when the enamel of the permanent teeth is being formed, and its absence cannot be assumed to indicate freedom from other fluoride-induced effects including effects of organofluorides and their metabolites. 168 references.

  5. Other Fluoride Products

    Science.gov (United States)

    ... Water Fluoridation Journal Articles for Community Water Fluoridation Other Fluoride Products Recommend on Facebook Tweet Share Compartir ... Use the information listed below to compare the other fluoride products that may lower the risk for ...

  6. Fluoride varnish or fluoride mouth rinse?

    DEFF Research Database (Denmark)

    Keller, M K; Klausen, B J; Twetman, S

    2016-01-01

    OBJECTIVE: In many Danish communities, school-based fluoride programs are offered to children with high caries risk in adjunct to tooth brushing. The purpose of this field trial was to compare the caries-preventive effectiveness of two different fluoride programs in 6-12 year olds. BASIC RESEARCH...... different schools were enrolled after informed consent and their class unit was randomly allocated to one of two fluoride programs. INTERVENTIONS: One group received a semi-annual fluoride varnish applications (FV) and the other group continued with an existing program with fluoride mouth rinses once per...... in caries development over two years among children participating in a school-based fluoride varnish or mouth rinse program....

  7. Fluoride in diet

    Science.gov (United States)

    Diet - fluoride ... bones and teeth. Too much fluoride in the diet is very rare. Rarely, infants who get too ... of essential vitamins is to eat a balanced diet that contains a variety of foods from the ...

  8. Fluoride glass fiber optics

    CERN Document Server

    Aggarwal, Ishwar D

    1991-01-01

    Fluoride Glass Fiber Optics reviews the fundamental aspects of fluoride glasses. This book is divided into nine chapters. Chapter 1 discusses the wide range of fluoride glasses with an emphasis on fluorozirconate-based compositions. The structure of simple fluoride systems, such as BaF2 binary glass is elaborated in Chapter 2. The third chapter covers the intrinsic transparency of fluoride glasses from the UV to the IR, with particular emphasis on the multiphonon edge and electronic edge. The next three chapters are devoted to ultra-low loss optical fibers, reviewing methods for purifying and

  9. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after...... (6 on fluoride mouth rinse, 10 on fluoride gel and 3 on fluoride foam); 6 had a low risk of bias while 2 had a moderate risk. All fluoride measures appeared to be beneficial in preventing crown caries and reversing root caries, but the quality of evidence was graded as low for fluoride mouth rinse......, moderate for fluoride gel and very low for acidulated fluoride foam. No conclusions could be drawn on the cost-effectiveness. CONCLUSIONS: This review, covering the recent decade, has further substantiated the evidence for a caries-preventive effect of fluoride mouth rinse, fluoride gel and foam...

  10. PRODUCTION OF THORIUM FLUORIDE

    Science.gov (United States)

    Zachariasen, W.H.

    1959-08-11

    A process is presented for producing anhydrous thorium fluoride comprising the step of contacting a saturated aqueous solution of thorium nitrate with an aqueous solution of hydrofluoric acid having a concentration of about 45 to 50% by weight at a temperature above 70 deg C whereby anhydrous thorium fluoride precipitates.

  11. Fluoride varnishes and enamel caries

    NARCIS (Netherlands)

    Bruyn, Hugo de

    1987-01-01

    Topical fluoride applications have the aim of increasing the fluoride uptake in enamel and consequently reducing caries. In the early ‘60s fluoride varnishes were introduced because they had a long contact period with the enamel which resulted in a higher fluoride uptake than from other topical appl

  12. Salt fluoridation and oral health

    OpenAIRE

    Thomas M. Marthaler

    2013-01-01

    The aim of this paper is to make known the potential of fluoridated salt in community oral health programs, particularly in South Eastern Europe. Since 1922, the addition of iodine to salt has been successful in Switzerland. Goiter is virtually extinct. By 1945, the cariesprotective effect of fluorides was well established. Based on the success of water fluoridation, a gynecologist started adding of fluoride to salt. The sale of fluoridated salt began in 1956 in the Swiss Canton of Zurich,...

  13. Urinary fluoride excretion after application of fluoride varnish and use of fluoride toothpaste in young children

    DEFF Research Database (Denmark)

    Lockner, Frida; Twetman, Svante; Stecksén-Blicks, Christina

    2017-01-01

    the levels with and without parallel use of fluoride toothpaste. DESIGN: Fifteen healthy children were enrolled to a randomized crossover trial that was performed in two parts: Part I with twice-daily tooth brushing with fluoride toothpaste and Part II with twice-daily brushing with a non-fluoride toothpaste......: There was a statistically significant increase in the 6-h fluoride excretion after application of both experimental varnishes, with and without parallel use of fluoride toothpaste (P toothpaste was used, the mean fluoride excretion was 0.20 mg/6 h after application of Duraphat and 0.29 mg/6 h...... after application of Profluorid Varnish (P = 0.18). CONCLUSIONS: Topical applications of 0.1 mL of fluoride varnish significantly increased the 6-h fluoride excretion. As some individuals displayed excretion levels exceeding the optimal fluoride exposure, a restricted use of fluoride toothpaste...

  14. Fluoride retention by kaolin clay

    DEFF Research Database (Denmark)

    Kau, P. M. H.; Smith, D. W.; Binning, Philip John

    1997-01-01

    To evaluate the potential effectiveness of kaolin clay liners in storage of fluoride contaminated waste, an experimental study of the sorption and desorption behaviour of fluoride in kaolin clay was conducted. The degree of fluoride sorption by kaolin was found to depend on solution p......H and available fluoride concentration with equilibrium being achieved within 24 h. A site activation process involving the uptake of fluoride was also observed at the initial stages of sorption. This behaviour was attributed to a layer expansion process of the clay during sorption. The maximum fluoride sorption...

  15. Water Fluoridation Statistics - Percent of PWS population receiving fluoridated water

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2000-2014. Water Fluoridation Statistics is a biennial report of the percentage and number of people receiving fluoridated water from 2000 through 2014, originally...

  16. Water Fluoridation Statistics - Percent of PWS population receiving fluoridated water

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2000-2014 Water Fluoridation Statistics is a biennial report of the percentage and number of people receiving fluoridated water from 2000 through 2014, originally...

  17. Permeability and fluoride release of lining materials containing amine fluorides.

    Science.gov (United States)

    Nordbö, H; Eriksen, H M

    1976-11-01

    The addition of amine fluorides to a copal recin (Copalite) and a chlorine caoutchouc varnish (Pergut S-40) has been studied. The permeability of Copalite films was only slightly increased whereas the excellent film-forming qualities of Pergut S-40 were destroyed by the addition of fluorides. A high fluoride release was found initially from test films of the materials but within 2-3 weeks a decrease to very low fluoride levels was observed.

  18. Heavy Metal Fluoride Glasses.

    Science.gov (United States)

    1987-04-01

    i 2N E ihhhhh1112h MEmhhhhEEEohhhhE I.’....momo 111111111’-20 LA ’Ll2. AFWL-TR-86-37 AFWL-TR- 86-37 oT C ,l C ’-’ N HEAVY METAL FLUORIDE GLASSES 0nI...Secwrit CkasmfcationJ HEAVY METAL FLUORIDE GLASSES 12. PERSONAL AUTHOR(S) Reisfield, Renata; and Eyal, Mrek 13. TYPE OF REPORT 113b. TIME COVERED 114...glasses containing about 50 mole% of ZrF4 [which can be replaced by HfF 4 or TIF 4 (Refs. 1-3) or heavy metal fluorides based on PbF2 and on 3d-group

  19. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after an el...... brushing with fluoride toothpaste....

  20. Relationships of human plasma fluoride and bone fluoride to age

    Energy Technology Data Exchange (ETDEWEB)

    Parkins, F.M.; Tinanoff, N.; Moutinho, M.; Anstey, M.B.; Waziri, M.H.

    1976-04-01

    There is evidence that fluoride levels in plasma correlate with the fluoride content in bones. The authors determined whether or not fluoride in plasma and bones might correlate with age. In 41 in-patients at the University Hospital, Iowa City, 36 of whom had been residing in fluoridated communities plasma fluoride was determined in the fasting stage by the fluoride ion selective electrode. The teeth of these children were compared with those of a neighboring city where the natural fluoride content in drinking water was 0.1 ppm. For the second sampling 42 months following the beginning of the program only 10 and 11 year old children - who had been 6 and 7 years old at the beginning of the experiment - were selected. Twenty-five boys and girls in each group were compared with a similar group of children as controls. After 28 months (approximately 33 rinsing with sodium fluoride solution) the DMF index in the fluoride-treated children was 18.4% less than in the controls. In the second group among 10 and 11 year old children after 42 months with 55 rinsings the difference was 35.0%. The author acknowledged that factors other than applications of sodium fluoride may have contributed to the prevention of caries in the fluoride-treated groups.

  1. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after...... an electronic search for literature published in English between 2003 and 2014. The included papers were assessed for their risk of bias and the results were narratively synthesized due to study heterogeneity. The quality of evidence was expressed according to GRADE. RESULTS: A total of 19 papers were included...... (6 on fluoride mouth rinse, 10 on fluoride gel and 3 on fluoride foam); 6 had a low risk of bias while 2 had a moderate risk. All fluoride measures appeared to be beneficial in preventing crown caries and reversing root caries, but the quality of evidence was graded as low for fluoride mouth rinse...

  2. Salt fluoridation and oral health

    Directory of Open Access Journals (Sweden)

    Thomas M. Marthaler

    2013-11-01

    Full Text Available The aim of this paper is to make known the potential of fluoridated salt in community oral health programs, particularly in South Eastern Europe. Since 1922, the addition of iodine to salt has been successful in Switzerland. Goiter is virtually extinct. By 1945, the cariesprotective effect of fluorides was well established. Based on the success of water fluoridation, a gynecologist started adding of fluoride to salt. The sale of fluoridated salt began in 1956 in the Swiss Canton of Zurich, and several other cantons followed suit. Studies initiated in the early seventies showed that fluoride, when added to salt, inhibits dental caries. The addition of fluoride to salt for human consumption was officially authorized in 1980-82. In Switzerland 85% of domestic salt consumed is fluoridated and 67% in Germany. Salt fluoridation schemes are reaching more than one hundred million in Mexico, Colombia, Peru and Cuba. The cost of salt fluoridation is very low, within 0.02 and 0.05 € per year and capita. Children and adults of the low socio-economic strata tend to have substantially more untreated caries than higher strata. Salt fluoridation is by far the cheapest method for improving oral health. Conclusions. Salt fluoridation has cariostatic potential like water fluoridation (caries reductions up to 50%. In Europe, meaningful percentages of users have been attained only in Germany (67% and Switzerland (85%. In Latin America, there are more than 100 million users, and several countries have arrived at coverage of 90 to 99%. Salt fluoridation is by far the cheapest method of caries prevention, and billions of people throughout the world could benefit from this method.

  3. Health Effects Associated with Water Fluoridation.

    Science.gov (United States)

    Richmond, Virginia L.

    1979-01-01

    Discussion is presented concerning fluoridation of water supplies. Correlation between fluoride in drinking water and improved dental health is reviewed. Relationship is expressed between fluoridation and reduced tooth decay. Use of fluoride in treating skeletal disorders is discussed. Author advocates fluoridating water supplies. (SA)

  4. Industrial fluoride pollution: chronic fluoride poisoning in Cornwall Island cattle

    Energy Technology Data Exchange (ETDEWEB)

    Krook, L.; Maylin, G.A.

    1979-04-01

    An aluminum plant on the south bank of the St. Lawrence River, southwest of Cornwall Island, Ontario, Canada, has emitted 0.816 metric tons of fluoride daily since 1973. Considerably higher amounts were emitted from 1959 to 1973. The plant was designated as the major source of fluoride emissions impacting on Cornwall Island. Cattle located on this island showed signs of chronic fluoride poisoning. This poisoning was manifested clinically by stunted growth and dental fluorosis to a degree of severe interference with drinking and mastication. This Cornwall Island herds study indicates that the established tolerance level of fluoride for performance of dairy and beef cattle is not valid since the tolerance level was set based on experiments with healthy calves which were exposed to dietary fluoride from 3 to 4 months of age and not on cattle which were chronically exposed to fluoride from conception to death. 56 references.

  5. 49 CFR 173.163 - Hydrogen fluoride.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  6. Fluoride-induced chronic renal failure.

    Science.gov (United States)

    Lantz, O; Jouvin, M H; De Vernejoul, M C; Druet, P

    1987-08-01

    Renal fluoride toxicity in human beings is difficult to assess in the literature. Although experimental studies and research on methoxyflurane toxicity have shown frank renal damage, observations of renal insufficiency related to chronic fluoride exposure are scarce. We report a case of fluoride intoxication related to potomania of Vichy water, a highly mineralized water containing 8.5 mg/L of fluoride. Features of fluoride osteosclerosis were prominent and end-stage renal failure was present. The young age of the patient, the long duration of high fluoride intake, and the absence of other cause of renal insufficiency suggest a causal relationship between fluoride intoxication and renal failure.

  7. Fluorination utilizing thermodynamically unstable fluorides and fluoride salts thereof

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Neil (Orinda, CA); Whalen, J. Marc (Corning, NY); Chacon, Lisa (Corning, NY)

    2000-12-12

    A method for fluorinating a carbon compound or cationic carbon compound utilizes a fluorination agent selected from thermodynamically unstable nickel fluorides and salts thereof in liquid anhydrous hydrogen fluoride. The desired carbon compound or cationic organic compound to undergo fluorination is selected and reacted with the fluorination agent by contacting the selected organic or cationic organic compound and the chosen fluorination agent in a reaction vessel for a desired reaction time period at room temperature or less.

  8. FLUORIDE TOXICITY – A HARSH REALITY

    Directory of Open Access Journals (Sweden)

    Bandlapalli Pavani

    2011-04-01

    Full Text Available There are many incidents of fluoride toxicity whether it is acute or chronic. Fluoride toxicity is an environmental hazard which arises from the upper layers of geological crust and is dissolved in water. Prolonged drinking of such water causes chronic fluoride toxicity. Use of fluoride containing compounds for various purposes such as dental products, metal, glass, refrigerator and chemical industries act as a source of fluoride poisoning and increase the risk of toxicity. This review reflects the deleterious effects of fluorides on various organs in the physiological system.

  9. Chronic fluoride toxicity: dental fluorosis.

    Science.gov (United States)

    Denbesten, Pamela; Li, Wu

    2011-01-01

    Dental fluorosis occurs as a result of excess fluoride ingestion during tooth formation. Enamel fluorosis and primary dentin fluorosis can only occur when teeth are forming, and therefore fluoride exposure (as it relates to dental fluorosis) occurs during childhood. In the permanent dentition, this would begin with the lower incisors, which complete mineralization at approximately 2-3 years of age, and end after mineralization of the third molars. The white opaque appearance of fluorosed enamel is caused by a hypomineralized enamel subsurface. With more severe dental fluorosis, pitting and a loss of the enamel surface occurs, leading to secondary staining (appearing as a brown color). Many of the changes caused by fluoride are related to cell/matrix interactions as the teeth are forming. At the early maturation stage, the relative quantity of amelogenin protein is increased in fluorosed enamel in a dose-related manner. This appears to result from a delay in the removal of amelogenins as the enamel matures. In vitro, when fluoride is incorporated into the mineral, more protein binds to the forming mineral, and protein removal by proteinases is delayed. This suggests that altered protein/mineral interactions are in part responsible for retention of amelogenins and the resultant hypomineralization that occurs in fluorosed enamel. Fluoride also appears to enhance mineral precipitation in forming teeth, resulting in hypermineralized bands of enamel, which are then followed by hypomineralized bands. Enhanced mineral precipitation with local increases in matrix acidity may affect maturation stage ameloblast modulation, potentially explaining the dose-related decrease in cycles of ameloblast modulation from ruffle-ended to smooth-ended cells that occur with fluoride exposure in rodents. Specific cellular effects of fluoride have been implicated, but more research is needed to determine which of these changes are relevant to the formation of fluorosed teeth. As further

  10. Fluoride level in saliva after bonding orthodontic brackets with a fluoride containing adhesive

    NARCIS (Netherlands)

    Ogaard, B; Arends, J; Helseth, H; Dijkman, G; vanderKuijl, M

    1997-01-01

    The fluoride level in saliva is considered an important parameter in caries prevention. Elevation of the salivary fluoride level by a fluoride-releasing orthodontic bonding adhesive would most likely be beneficial in the prevention of enamel caries. In this study, the fluoride level in saliva was me

  11. Fluoridering af drikkevandet i Danmark?

    DEFF Research Database (Denmark)

    Arvin, Erik; Spliid, Henrik; Bruvo, M.;

    2010-01-01

    Første gang sammenhængen mellem caries (huller i tænderne) og fluoridindholdet i drikkevand blev diskuteret i vandværkskredse i Danmark var ved årsmødet i 1958. Her blev det oplyst, at fluorid i drikkevand beskytter mod caries, men man konstaterede også, at der nok ikke var stemning for fluorid......-tilsætning til drikkevandet (fluoridering). Siden da er emnet ikke taget op. Formålet med dette indlæg er at besvare spørgsmålene: 1. Er der behov for fluoridering af drikkevandet i Danmark? 2. Er der alternativer? Hvordan påvirker blødgøring af vand og andre vandbehandlingsmetoder dental caries hos børn og unge......? Som baggrund herfor vil vi redegøre for resultaterne af et netop afsluttet studium af sammenhængen mellem caries og drikkevandets sammensætning, specielt m.h.t. luoridindholdet og vandets calciumindhold (hårdhed). Undersøgelsen bekræfter, at fluorid i drikkevand i væsentlig grad beskytter mod caries...

  12. High-fluoride groundwater.

    Science.gov (United States)

    Rao, N Subba

    2011-05-01

    Fluoride (F(-)) is essential for normal bone growth, but its higher concentration in the drinking water poses great health problems and fluorosis is common in many parts of India. The present paper deals with the aim of establishment of facts of the chemical characteristics responsible for the higher concentration of F(-) in the groundwater, after understanding the chemical behavior of F(-) in relation to pH, total alkalinity (TA), total hardness (TH), carbonate hardness (CH), non-carbonate hardness (NCH), and excess alkalinity (EA) in the groundwater observed from the known areas of endemic fluorosis zones of Andhra Pradesh that have abundant sources of F(-)-bearing minerals of the Precambrians. The chemical data of the groundwater shows that the pH increases with increase F(-); the concentration of TH is more than the concentration of TA at low F(-) groundwater, the resulting water is represented by NCH; the TH has less concentration compared to TA at high F(-) groundwater, causing the water that is characterized by EA; and the water of both low and high concentrations of F(-) has CH. As a result, the F(-) has a positive relation with pH and TA, and a negative relation with TH. The operating mechanism derived from these observations is that the F(-) is released from the source into the groundwater by geochemical reactions and that the groundwater in its flowpath is subjected to evapotranspiration due to the influence of dry climate, which accelerates a precipitation of CaCO(3) and a reduction of TH, and thereby a dissolution of F(-). Furthermore, the EA in the water activates the alkalinity in the areas of alkaline soils, leading to enrichment of F(-). Therefore, the alkaline condition, with high pH and EA, and low TH, is a more conducive environment for the higher concentration of F(-) in the groundwater.

  13. Microcratering in Polyvinylidene Fluoride

    Science.gov (United States)

    Shu, Anthony John

    Dust is defined as macroparticles as small as a few molecules up to several micrometers in diameter. In the context of space exploration, it was originally seen only as a technical obstacle to applications; dust can damage instrument surfaces, coat mating surfaces preventing proper seals, and impair or obstruct measurements. Because of the ubiquity of dust in the solar system and its role in the origin of planets and other bodies, the study of dust and related phenomena has evolved to a scientific subdiscipline which can provide us insight into the origins and evolution of our solar system. In order to facilitate this, a hypervelocity dust accelerator has been built at the University of Colorado at Boulder and is being used to probe impact phenomena, dust mitigation techniques, dust detection techniques, and more. One such dust detector is a Polyvinylidene Fluoride (PVDF) dust detector. The PVDF dust detector is very lightweight and consumes little power. Due to these properties, PVDF detectors can potentially be used on any spacecraft to gain information on the local dust environment. It is not fully understood how this PVDF dust detector signal is generated, so at present can only be used as a dust counter. In this thesis I discuss the importance of the study of dust phenomena, describe the accelerator experiment, and describe a study conducted to determine the underlying physical principles of PVDF dust detectors. This included measuring crater size scaling laws, measuring the detailed shape of craters, and applying this data to simulations of the signals being generated by PVDF detectors.

  14. Molten fluorides for nuclear applications

    Directory of Open Access Journals (Sweden)

    Sylvie. Delpech

    2010-12-01

    Full Text Available The importance of pyrochemistry is being increasingly acknowledged and becomes unavoidable in the nuclear field. Molten salts may be used for fuel processing and spent fuel recycling, for heat transfer, as a homogeneous fuel and as a breeder material in fusion systems. Fluorides that are stable at high temperature and under high neutron flux are especially promising. Analysis of several field cases reveals that corrosion in molten fluorides is essentially due to the oxidation of metals by uranium fluoride and/or oxidizing impurities. The thermodynamics of this process are discussed with an emphasis on understanding the mass transfer in the systems, selecting appropriate metallic materials and designing effective purification methods.

  15. Fluoride: its role in dentistry

    Directory of Open Access Journals (Sweden)

    Livia Maria Andaló Tenuta

    2010-01-01

    Full Text Available In spite of decades of research on fluoride and the recognition of its role as the cornerstone of dental caries reduction in the last fifty years, questions still arise on its use at community, self-applied and professional application levels. Which method of fluoride delivery should be used? How and when should it be used? How can its benefits be maximized and still reduce the risks associated with its use? These are only some of the challenging questions facing us daily. The aim of this paper is to present scientific background to understand the importance of each method of fluoride use considering the current caries epidemiological scenario, and to discuss how individual or combined methods can be used based on the best evidence available.

  16. The Effect of Fluoride in Osteoporosis.

    Science.gov (United States)

    Hedlund, L. R.; Gallagher, J. C.

    1987-01-01

    This article discusses the effect of fluoride on bone tissue and the possible role of fluoride in the treatment of osteoporosis. At present, fluoride treatment should be restricted to clinical trials until its risks and benefits have been further evaluated. (Author/MT)

  17. Fluoride in African groundwater: Occurrence and mitigation

    NARCIS (Netherlands)

    Vasak, S.; Griffioen, J.; Feenstra, L.

    2010-01-01

    Fluoride in groundwater has both natural and anthropogenic sources. Fluoride bearing minerals, volcanic gases and various industrial and agricultural activities can contribute to high concentrations. High intake of fluoride from drinking water is the main cause of fluorosis and may lead to many othe

  18. Special Report: Fluoridation of Water.

    Science.gov (United States)

    Hileman, Bette

    1988-01-01

    Reviews the controversy regarding water fluoridation in the United States during the last 50 years. Discusses the current status; benefits; and health risks including skeletal fluorosis, kidney disease, hypersensitivity, mutagenic effects, birth defects, and cancer. Presents statistics and anecdotal accounts. (CW)

  19. Fissure seal or fluoride varnish?

    Science.gov (United States)

    Deery, Christopher

    2016-09-01

    Data sourcesCochrane Oral Health Group Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), Medline, Embase, the US National Institutes of Health Trials Register and the World Health Organization (WHO) Clinical Trials Registry PlatformStudy selectionRandomised controlled trials (RCTs) with at least 12 months follow-up, in which fissure sealants, or fissure sealants together with fluoride varnishes, were compared with fluoride varnishes alone for preventing caries in occlusal surfaces of permanent teeth of children and adolescents.Data extraction and synthesisTwo reviewers independently screened search results, extracted data and assessed risk of bias of included studies. Studies were grouped and analysed on the basis of sealant material type (resin-based sealant and glass ionomer-based sealant, glass ionomer and resin-modified glass ionomer) and different follow-up periods. Odds ratio were calculated for caries or no caries on occlusal surfaces of permanent molar teeth. Mean differences were calculated for continuous outcomes and data. Evidence quality was assessed using GRADE (Grades of Recommendation, Assessment, Development and Evaluation) methods.ResultsEight RCTs involving a total of 1747 children aged five to ten years of age were included. Three trials compared resin-based fissure sealant versus fluoride varnish. Results from two studies (358 children) after two years were combined. Sealants prevented more caries, pooled odds ratio (OR) = 0.69 (95%CI; 0.50 to 0.94). One trial with follow-up at four and nine years found that the caries-preventive benefit for sealants was maintained, with 26% of sealed teeth and 55.8% of varnished teeth having developed caries at nine years. Evidence for glass-ionomer sealants was of low quality. One split-mouth trial analysing 92 children at two-year follow-up found a significant difference in favour of resin-based fissure sealant together with fluoride varnish compared with fluoride varnish only (OR

  20. Global affordability of fluoride toothpaste

    Directory of Open Access Journals (Sweden)

    Holmgren Christopher J

    2008-06-01

    Full Text Available Abstract Objective Dental caries remains the most common disease worldwide and the use of fluoride toothpaste is a most effective preventive public health measure to prevent it. Changes in diets following globalization contribute to the development of dental caries in emerging economies. The aim of this paper is to compare the cost and relative affordability of fluoride toothpaste in high-, middle- and low-income countries. The hypothesis is that fluoride toothpaste is not equally affordable in high-, middle- and low-income countries. Methods Data on consumer prices of fluoride toothpastes were obtained from a self-completion questionnaire from 48 countries. The cost of fluoride toothpaste in high-, middle- and low-income countries was compared and related to annual household expenditure as well as to days of work needed to purchase the average annual usage of toothpaste per head. Results The general trend seems to be that the proportion of household expenditure required to purchase the annual dosage of toothpaste increases as the country's per capita household expenditure decreases. While in the UK for the poorest 30% of the population only 0.037 days of household expenditure is needed to purchase the annual average dosage (182.5 g of the lowest cost toothpaste, 10.75 days are needed in Kenya. The proportion of annual household expenditure ranged from 0.02% in the UK to 4% in Zambia to buy the annual average amount of lowest cost toothpaste per head. Conclusion Significant inequalities in the affordability of this essential preventive care product indicate the necessity for action to make it more affordable. Various measures to improve affordability based on experiences from essential pharmaceuticals are proposed.

  1. Fluoride retention in saliva and in dental biofilm after different home-use fluoride treatments.

    Science.gov (United States)

    Souza, Daniela Correia Cavalcante; Maltz, Marisa; Hashizume, Lina Naomi

    2014-01-01

    This single-blind, randomized, crossover study aimed at assessing the long-term fluoride concentrations in saliva and in dental biofilm after different home-use fluoride treatments. The study volunteers (n = 38) were residents of an area with fluoridated drinking water. They were administered four treatments, each of which lasted for one week: twice-daily placebo dentifrice, twice-daily fluoride dentifrice, twice-daily fluoride dentifrice and once-daily fluoride mouthrinse, and thrice-daily fluoride dentifrice. At the end of each treatment period, samples of unstimulated saliva and dental biofilm were collected 8 h after the last oral hygiene procedure. Fluoride concentrations in saliva and dental biofilm were analyzed using a specific electrode. The fluoride concentrations in saliva and dental biofilm 8 h after the last use of fluoride products did not differ among treatments. The results of this study suggest that treatments with home-use fluoride products have no long-term effect on fluoride concentrations in saliva and in dental biofilm of residents of an area with a fluoridated water supply.

  2. Determination of Fluoride in Various Samples and Some Infusions Using a Fluoride Selective Electrode

    OpenAIRE

    TOKALIOĞLU, Şerife; Kartal, Şenol; ŞAHİN, Uğur

    2004-01-01

    The determination of fluoride in some environmental samples was performed using a fluoride ion-selective electrode. Fluoride concentrations were determined in drinking waters (from different provinces, districts and villages in Turkey), fruit juices, bottled water samples, toothpastes and tooth powders, liquors of Turkish coffee, coffee, linden, rose hip, and various brand tea infusions, and dust samples collected from the Erciyes University campus car park. The average fluoride conc...

  3. Fluoride Importance in Controlling Caries and Fluorosis

    OpenAIRE

    Gaurav Solanki

    2012-01-01

    The use of fluorides for oral health has always involved a balance between the protective benefit against dental caries and the risk of developing fluorosis. The link between fluoride and dental health was established to determining the causes of dental fluorosis or enamel mottling. Fluorosis in Indian children was highly prevalent in the early 1990s. Policy were introduced to control fluoride exposure and to reduce the prevalence of fluorosis. The study aimed of describing the prevalence, se...

  4. Effect of titanium tetrafluoride, amine fluoride and fluoride varnish on enamel erosion in vitro

    NARCIS (Netherlands)

    Vieira, A; Ruben, JL; Huysmans, MCDNJM

    2005-01-01

    This study aimed at evaluating the effect of 1 and 4% titanium tetrafluoride (TiF4) gels, amine fluoride (AmF) 1 and 0.25% and a fluoride varnish (FP) on the prevention of dental erosion. Two experimental groups served as controls, one with no pretreatment and another one pre-treated with a fluoride

  5. High fluoride exposure in hemodialysis patients.

    Science.gov (United States)

    Bello, V A; Gitelman, H J

    1990-04-01

    The observation of higher plasma flouride levels in our hemodialysis (HD) patients than our continuous ambulatory peritoneal dialysis (CAPD) patients (4.0 +/- 0.5 mumol/L [n = 17] v 2.5 +/- 0.3 mumol/L [n = 17], P less than 0.005) prompted an evaluation of fluoride metabolism during HD. We found that serum fluoride was completely ultrafiltrable across cuprophane membranes (99% +/- 4%) and that HD produced acute changes in plasma fluoride levels that correlated well with the fluoride gradient between plasma and dialysis fluid at the start of dialysis. Our HD fluids contained significantly higher fluoride concentrations than were present in commercially prepared peritoneal dialysis fluid. Our fluids are prepared from fluoridated tap water that is purified by reverse osmosis (RO). We conclude that the different concentrations of fluoride in our dialysis fluids account for the differences in the plasma flouride concentrations between our dialysis groups. Since many HD units rely on RO systems to purify fluoridated tap water, it is likely that many HD patients are being exposed inadvertently to increased concentrations of fluoride.

  6. Effects of different kinds of fluorides on enolase and ATPase activity of a fluoride-sensitive and fluoride-resistant Streptococcus mutans strain

    NARCIS (Netherlands)

    van Loveren, C.; Hoogenkamp, M.A.; Deng, D.M.; ten Cate, J.M.

    2008-01-01

    Enolase and ATPase are sensitive to fluoride. It is unclear whether this sensitivity differs for F-sensitive and F-resistant cells or for different types of fluoride. Permeabilized cells of the fluoride-sensitive strain Streptococcus mutans C180-2 and its fluoride-resistant mutant strain C180-2 FR w

  7. Fluoride intake and its safety among heavy tea drinkers in a British fluoridated city.

    Science.gov (United States)

    Jenkins, G N

    1991-01-01

    Tea-drinking in very young children has been studied in a British city. The results suggested that the fluoride in tea would, in some cases, be sufficient to influence caries. Clinical findings to some extent supported this. The main purpose of the investigation reported here was to determine maximum possible fluoride intake in adults who were heavy tea drinkers in a fluoridated city and relate it to toxic thresholds. Heavy tea drinkers were traced through Health Visitors and voluntary organizations and the volumes and fluoride concentrations of their drinks were measured. Even the highest intake found (9 mg) is below the probable intake in Bartlett, Texas (8 ppm of fluoride), in relation to which no undesirable symptoms have been reported (Leone et al. 1954). This confirms the safety of fluoridation. The effects on fluoride concentration of evaporating soft and hard fluoride-containing waters to small bulk were compared. The results showed ceilings of 3 ppm of fluoride in hard water and about 14 ppm in soft water, much higher than the levels expected on the basis of the usually stated solubility of CaF2 (16 or 8 ppm of fluoride). However, under normal household conditions, it is most unlikely that dangerous levels of fluoride would be ingested from boiled water.

  8. Review on fluoride, with special emphasis on calcium fluoride mechanisms in caries prevention.

    Science.gov (United States)

    ten Cate, J M

    1997-10-01

    Low concentrations of fluoride have a beneficial effect on enamel and dentin de- and remineralization. After fluoride treatments, such as topical applications, rinses or dentifrices, salivary fluoride concentrations decrease exponentially in a biphasic manner to very low concentrations within a few hours. For treatments to be effective over periods longer than the brushing and the following salivary clearance, fluoride needs to be deposited and slowly released. Calcium fluoride (or like) deposits act in such a way, owing to a surface covering of phosphate and/or proteins, which makes the CaF2 less soluble under in vivo conditions than in a pure form in inorganic solutions. Moreover, due to the phosphate groups on the surface of the calcium fluoride globules, fluoride is assumed to be released with decreasing pH when the phosphate groups are protonated in the dental plaque.

  9. HOUSEHOLD PURIFICATION OF FLUORIDE CONTAMINATED MAGADI (TRONA)

    DEFF Research Database (Denmark)

    1997-01-01

    Purification of fluoride contaminated magadi is studied using bone char sorption and calcium precipitation. The bone char treatment is found to be workable both in columns and in batches where the magadi is dissolved in water prior to treatment. The concentrations in the solutions were 89 g magadi...... treatment method. A procedure for purification of fluoride contaminated magadi at household level is described....

  10. Determination of fluoride content in drinking water and tea infusions using fluoride ion selective electrode

    Directory of Open Access Journals (Sweden)

    Rajković Miloš B.

    2007-01-01

    Full Text Available Potentiometric analysis of fluoride content (as F- ion in solutions by using fluoride ion-selective electrode is simple, reliable and cheap. Very small concentrations of fluoride-ions (to 10-6 mol/dm3 can be determined by fluoride selective electrode, with regulation of ion strength of a solution and control of concentration of hydroxide ions and interfering ions of metals. The influence of pH and complexing ions of metals can be successfully regulated by the TISAB solution and by preserving pH value in the range from 5.00 to 7.00. The content of fluorides in the samples can be determined by the method of direct potentiometer, and in the case of very low concentration by standard addition method. In this paper it was analyzed the determination of fluoride ions concentration in bottled mineral waters and water from Belgrade plumbing in two Belgrade districts (Palilula and Novi Beograd and in tea, by using the fluoride selective electrode. It was determined that the content of fluoride ions in bottled mineral water significantly differs from values given on declaration, and that content of fluoride ions varies over a period of time. The content of fluoride ions in water from plumbing in two Belgrade districts at the time of analysis was significantly increased and exceeded values given in Regulation for drinking water quality. The received results from the analysis of fluorides in teas show that fluorides exist in teas in different concentrations. There are also differences between the same kinds of tea, which is noted with mint (Mentha piperitae folium, as a consequence of differences between soils where it was planted. As taking of fluorides, according to World Health Organisation recommendation (WHO, is limited in the range from 2 to 4 mg per day, it is necessary to give the content of fluorides on all products that are used in human consumption.

  11. Diethylenetriaminium hexafluoridotitanate(IV fluoride

    Directory of Open Access Journals (Sweden)

    J. Lhoste

    2008-11-01

    Full Text Available The title compound, (C6H21N4[TiF6]F, was synthesized by the reaction of TiO2, tris(2-aminoethylamine, HF and ethanol at 463 K in a microwave oven. The crystal structure consists of two crystallographically independent [TiF6]2− anions, two fluoride anions and two triply-protonated tris(2-aminoethylamine cations. The Ti atoms are coordinated by six F atoms within slightly distorted octahedra. The anions and cations are connected by intermolecular N—H...F hydrogen bonds.

  12. Fluoride Programs in the School Setting: Preventive Dental Health.

    Science.gov (United States)

    Rebich, Theodore, Jr.; And Others

    1982-01-01

    Two types of school-based programs that increase students' use of fluoride for preventive dental health are described. In fluoride mouthrinse programs, teachers give their students a fluoride solution once a week in a paper cup. In areas where the level of fluoride in the water supply is insufficient, the flouride tablet program is used. (JN)

  13. Physiologic Conditions Affect Toxicity of Ingested Industrial Fluoride

    Directory of Open Access Journals (Sweden)

    Richard Sauerheber

    2013-01-01

    Full Text Available The effects of calcium ion and broad pH ranges on free fluoride ion aqueous concentrations were measured directly and computed theoretically. Solubility calculations indicate that blood fluoride concentrations that occur in lethal poisonings would decrease calcium below prevailing levels. Acute lethal poisoning and also many of the chronic effects of fluoride involve alterations in the chemical activity of calcium by the fluoride ion. Natural calcium fluoride with low solubility and toxicity from ingestion is distinct from fully soluble toxic industrial fluorides. The toxicity of fluoride is determined by environmental conditions and the positive cations present. At a pH typical of gastric juice, fluoride is largely protonated as hydrofluoric acid HF. Industrial fluoride ingested from treated water enters saliva at levels too low to affect dental caries. Blood levels during lifelong consumption can harm heart, bone, brain, and even developing teeth enamel. The widespread policy known as water fluoridation is discussed in light of these findings.

  14. Fluoride Adsorption by Pumice from Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Amir Hossein Mahvi

    2012-01-01

    Full Text Available Drinking water provides many vital elements for the human body, but the presence of some dissolved elements more than permissible concentration can endanger human health. Among the dissolved elements in drinking water, fluoride is noticeable, because both the very low or very high concentrations have adverse health impacts such as dental caries. Therefore, fluoride concentration should be kept in acceptable levels. In this study Pumice was used for fluoride removal. It was found that Fluoride sorption kinetic was fitted by pseudo-second-order model. The maximum sorption capacity of Pumice was found to be 13.51 mg/g at laboratory temperature (24°C. Maximum sorption study occurred at pH= 3. Results of Isotherm showed the fluoride sorption has been well fitted with Freundlich isotherm model. This study has demonstrated that Pumice can be used as effective adsorbents for fluoride removal from aqueous solutions. The adsorbent prepared in this study was cheap and efficient in removal of fluoride than other adsorbents.

  15. Current status of fluoride volatility method development

    Energy Technology Data Exchange (ETDEWEB)

    Uhlir, J.; Marecek, M.; Skarohlid, J. [UJV - Nuclear Research Institute, Research Centre Rez, CZ-250 68 Husinec - Rez 130 (Czech Republic)

    2013-07-01

    The Fluoride Volatility Method is based on a separation process, which comes out from the specific property of uranium, neptunium and plutonium to form volatile hexafluorides whereas most of fission products (mainly lanthanides) and higher transplutonium elements (americium, curium) present in irradiated fuel form nonvolatile tri-fluorides. Fluoride Volatility Method itself is based on direct fluorination of the spent fuel, but before the fluorination step, the removal of cladding material and subsequent transformation of the fuel into a powdered form with a suitable grain size have to be done. The fluorination is made with fluorine gas in a flame fluorination reactor, where the volatile fluorides (mostly UF{sub 6}) are separated from the non-volatile ones (trivalent minor actinides and majority of fission products). The subsequent operations necessary for partitioning of volatile fluorides are the condensation and evaporation of volatile fluorides, the thermal decomposition of PuF{sub 6} and the finally distillation and sorption used for the purification of uranium product. The Fluoride Volatility Method is considered to be a promising advanced pyrochemical reprocessing technology, which can mainly be used for the reprocessing of oxide spent fuels coming from future GEN IV fast reactors.

  16. Determination of the stability constant of Np(V) fluoride complex using a fluoride ion selective electrode

    Energy Technology Data Exchange (ETDEWEB)

    Sawant, R.M.; Rizvi, G.H.; Chaudhuri, N.K.; Patil, S.K. (Bhabha Atomic Research Centre, Bombay (India). Radiochemistry Div.)

    1985-04-01

    Fluoride complexing of Np(V) was studied using fluoride ion selective electrode (F-ISE). Free fluoride ion concentrations in the presence of Np(V) were measured at 0.1 and 0.01M ionic strength. The data were used to calculate the stability constant of the fluoride complex of Np(V) and the values obtained are reported.

  17. A fluoride release-adsorption-release system applied to fluoride-releasing restorative materials.

    Science.gov (United States)

    Suljak, J P; Hatibovic-Kofman, S

    1996-09-01

    This investigation compared the initial fluoride release and release following refluoridation of three resin-modified glass-ionomer cements (Photac-Fil Applicap, Vitremer, and Fuji II LC) and a new polyacid-modified resin composite material (Dyract). After daily flouride release was measured for 8 days, specimens were refluoridated in 1,000-ppm solutions of fluoride ion for 10 minutes and fluoride release was measured for 5 days. Two further 5-day refluoridation-release periods were carried out. All materials released fluoride initially. Photac released the most; Dyract released the least. Initial release was greatest over the first few days. All materials released significantly more fluoride for 24 to 48 hours after refluoridation. Less fluoride was released with each successive refluoridation for the three glass-ionomer cements. The release from the Dyract compomer remained at a comparatively constant and significantly lower level following each refluoridation.

  18. A study of fluoride groundwater occurrence in Nathenje, Lilongwe, Malawi

    Science.gov (United States)

    Msonda, K. W. M.; Masamba, W. R. L.; Fabiano, E.

    A study was carried out to determine fluoride concentration in groundwaters of Nathenje area situated in Lilongwe District in the central region of Malawi. Water samples were collected from 176 boreholes and shallow wells during different months in 2001 and 2002. Samples were then analysed for fluoride by using a fluoride electrode and an ion selective meter. The results showed that fluoride concentrations for the rainy season varied from dental fluorosis in areas where the fluoride concentration was high.

  19. Topical fluoride as a cause of dental fluorosis in children

    OpenAIRE

    Wong, MCM; Lo, ECM; Glenny, AM; Tsang, BWK; Worthington, HV; Marinho, VCC

    2009-01-01

    BACKGROUND: For many years, topical use of fluorides has gained greater popularity than systemic use of fluorides. A possible adverse effect associated with the use of topical fluoride is the development of dental fluorosis due to the ingestion of excessive fluoride by young children with developing teeth. OBJECTIVES: To describe the relationship between the use of topical fluorides in young children and the risk of developing dental fluorosis. SEARCH STRATEGY: Electronic search of the Cochra...

  20. High density fluoride glass calorimeter

    Science.gov (United States)

    Xie, Q.; Scheltzbaum, J.; Akgun, U.

    2014-04-01

    The unprecedented radiation levels in current Large Hadron Collider runs, and plans to even increase the luminosity creates a need for new detector technologies to be investigated. Quartz plates to replace the plastic scintillators in current LHC calorimeters have been proposed in recent reports. Quartz based Cherenkov calorimeters can solve the radiation damage problem, however light production and transfer have proven to be challenging. This report summarizes the results from a computational study on the performance of a high-density glass calorimeter. High-density, scintillating, fluoride glass, CHG3, was used as the active material. This glass has been developed specifically for hadron collider experiments, and is known for fast response time, in addition to high light yield. Here, the details of a Geant4 model for a sampling calorimeter prototype with 20 layers, and its hadronic as well as electromagnetic performances are reported.

  1. Dental fluorosis and skeletal fluoride content as biomarkers of excess fluoride exposure in marsupials.

    Science.gov (United States)

    Death, Clare; Coulson, Graeme; Kierdorf, Uwe; Kierdorf, Horst; Morris, William K; Hufschmid, Jasmin

    2015-11-15

    Particulate and gaseous fluoride emissions contaminate vegetation near fluoride-emitting industries, potentially impacting herbivorous wildlife in neighboring areas. Dental fluorosis has been associated with consumption of fluoride-contaminated foliage by juvenile livestock and wildlife in Europe and North America. For the first time, we explored the epidemiology and comparative pathology of dental fluorosis in Australian marsupials residing near an aluminium smelter. Six species (Macropus giganteus, Macropus rufogriseus, Wallabia bicolor, Phascolarctos cinereus, Trichosurus vulpecula, Pseudocheirus peregrinus) demonstrated significantly higher bone fluoride levels in the high (n=161 individuals), compared to the low (n=67 individuals), fluoride areas (pdental fluorosis in eutherian mammals. Within the high-fluoride area, 67% of individuals across the six species showed dental enamel lesions, compared to 3% in the low-fluoride areas. Molars that erupted before weaning were significantly less likely to display pathological lesions than those developing later, and molars in the posterior portion of the dental arcade were more severely fluorotic than anterior molars in all six species. The severity of dental lesions was positively associated with increasing bone fluoride levels in all species, revealing a potential biomarker of excess fluoride exposure.

  2. Materials processing apparatus development for fluoride glass

    Science.gov (United States)

    Smith, Guy A.; Kosten, Sue; Workman, Gary L.

    1994-01-01

    Fluoride glasses have great potential for optical fiber communications due to the high transmittance when no microcrystallites occur during drawing operations. This work has developed apparatus to test the occurrence of microcrystallites during recrystallization in reduced gravity on the KC-135. The apparatus allows fluoride glass fiber, such as ZBLAN, to be melted and recrystallized during both the low and high g portions the parabolic flight.

  3. Fluoride geochemistry of thermal waters in Yellowstone National Park: I. Aqueous fluoride speciation

    Science.gov (United States)

    Deng, Y.; Nordstrom, D.K.; Blaine, McCleskey R.

    2011-01-01

    Thermal water samples from Yellowstone National Park (YNP) have a wide range of pH (1-10), temperature, and high concentrations of fluoride (up to 50mg/l). High fluoride concentrations are found in waters with field pH higher than 6 (except those in Crater Hills) and temperatures higher than 50??C based on data from more than 750 water samples covering most thermal areas in YNP from 1975 to 2008. In this study, more than 140 water samples from YNP collected in 2006-2009 were analyzed for free-fluoride activity by ion-selective electrode (ISE) method as an independent check on the reliability of fluoride speciation calculations. The free to total fluoride concentration ratio ranged from 99% at high pH. The wide range in fluoride activity can be explained by strong complexing with H+ and Al3+ under acidic conditions and lack of complexing under basic conditions. Differences between the free-fluoride activities calculated with the WATEQ4F code and those measured by ISE were within 0.3-30% for more than 90% of samples at or above 10-6 molar, providing corroboration for chemical speciation models for a wide range of pH and chemistry of YNP thermal waters. Calculated speciation results show that free fluoride, F-, and major complexes (HF(aq)0, AlF2+, AlF2+ and AlF30) account for more than 95% of total fluoride. Occasionally, some complex species like AlF4-, FeF2+, FeF2+, MgF+ and BF2(OH)2- may comprise 1-10% when the concentrations of the appropriate components are high. According to the simulation results by PHREEQC and calculated results, the ratio of main fluoride species to total fluoride varies as a function of pH and the concentrations and ratios of F and Al. ?? 2011.

  4. Fluoride release and uptake capacities of fluoride-releasing restorative materials.

    Science.gov (United States)

    Attar, Nuray; Turgut, Melek D

    2003-01-01

    Many fluoride-releasing dental materials are being sold on the basis of their cariostatic properties. However, the amount fluoride release of these materials is still uncertain. This study investigated the fluoride release and uptake characteristics of four flowable resin composites (Heliomolar Flow, Tetric Flow, Wave, Perma Flo), one flowable compomer (Dyract flow), one conventional glass ionomer cement mixed with two different powder/liquid ratios (ChemFlex Syringeable and ChemFlex Condensable), one packable resin composite (SureFil), one ion-releasing composite (Ariston pHc) and one resin-modified glass ionomer cement (Vitremer). Seven discs (6-mm diameter and 1.5-mm height) were prepared for each material. Each disc was immersed in 3.5 ml of deionized water within a plastic vial and stored at 37 degrees C. The deionized water was changed every 24 hours and the release of fluoride was measured for 30 days. At the end of this period, the samples were recharged with 2 ml of 1.23% acidulated phosphate fluoride (APF) gel for four minutes. Then, all samples were reassessed for an additional 10 days. The fluoride release of all samples was measured with a specific fluoride electrode and an ionanalyzer. Statistical analyses were conducted using two-way repeated measure ANOVA and Duncan's multiple range tests. For all tested materials, the greatest fluoride release was observed after the first day of the study (p0.05). Ariston pHc released the highest amount of fluoride, followed by ChemFlex Syringeable, Vitremer and ChemFlex Condensable. There were statistically significant differences among these materials (p<0.05). Fluoride release of all materials were significantly increased after the first day following refluoridation and Ariston pHc released the greatest among all materials (p<0.01). At the end of two days of refluoridation, the fluoride release rate for each material dropped quickly and stabilized within three days.

  5. Well Waters Fluoride in Enugu, Nigeria

    Directory of Open Access Journals (Sweden)

    EI Ugwuja

    2012-03-01

    Full Text Available Abnormal fluoride levels in drinking water have been associated with adverse health effects. To determine the fluoride content of well waters in Enugu, southeastern Nigeria, water samples from 50 artisan wells chosen by multistage sampling procedure from the 5 zones of Enugu municipality were analyzed in duplicates for their fluoride content. The zonal mean values were 0.60, 0.70, 0.62, 0.62, and 0.63 mg/L for Abakpa Nike, Achara Layout, Obiagu/ Ogui, Trans Ekulu and Uwani, respectively (p<0.05. The mean value for the whole city was 0.63 mg/L. Although, the mean level of fluoride recorded in this study is currently within safe limits (1.5 mg/L, WHO 2011, it is important to monitor continuously the fluoride content of well waters in the municipality in view of the increasing industrial activities going on in the city and heavy reliance on well water for domestic purposes and the widespread use of consumer products containing fluoride.

  6. Analysis of fluoride concentration in solutions prepared at dispensing pharmacies

    Directory of Open Access Journals (Sweden)

    Eduardo Pizzatto

    2011-07-01

    Full Text Available Introduction: Fluoride plays an important role in oral health promotion and is considered important in dental caries prevention both in children and adults. Fluoride is widely used at high-risk conditions of caries, when the use of fluoride-containing mouthwashes is recommended, considering that fluoride itself reduces the risk of dental caries. Objective: To evaluate the fluoride concentration in solutions prepared at different dispensing pharmacies in the city of Curitiba – PR, Brazil. Material and methods: The analysis of fluoride concentration was preformed through Ion Chromatography method (DIONEX. Results: The results obtained through this analysis showed that all solutions presented fluoride concentration above that required in the dentist’s prescription, varying between 5.48% and 24.02% more fluoride, at absolute concentration. Conclusion: This finding highlights the increasing risk of fluoride acute intoxication in cases of accidental ingestion of the solution.

  7. Analysis of 1-Minute Potentially Available Fluoride from Dentifrice

    Science.gov (United States)

    Carey, Clifton M; Holahan, Erin C; Schmuck, Burton D

    2014-01-01

    Previous reports found that some fluoride-containing dentifrices do not release effective concentrations of fluoride during brushing. Failure to release fluoride can be due to dentifrice matrix components that interfere with the solubilization of the fluoride salts during brushing. A new generation of dentifrices has the capability to precipitate beneficial fluoride salts during tooth brushing. Therefore, a method that assesses the potentially available fluoride during the 1-minute brushing is needed. A new filter-paper absorption method to assess the 1-min bioavailable fluoride concentration was developed to meet this need. This method utilizes coiled filter paper that rapidly absorbs the aqueous phase of the dentifrice slurry followed by centrifugation to recover that fluid for fluoride measurement via fluoride ion-selective electrode. The analytical method was used to successfully determine the total fluoride and 1-min bioavailable fluoride in eight dentifrice products containing sodium fluoride (NaF), disodium monofluorophosphate (Na2FPO3, MFP), stannous fluoride (SnF2), or NaF with amorphous calcium phosphate (NaF + ACP). The results showed that some of the dentifrices tested had significantly lower potentially available fluoride than the total fluoride. For a MFP-containing sample, aged seven years past its expiry date, there was significant reduction in the bioavailable fluoride compared to MFP products that were not aged. Other than the aged MFP and the SnF2-containing samples the bioavailable fluoride for all products tested had at least 80 % of the label fluoride concentration. The filter paper absorption method yielded reproducible results for the products tested with MFP samples showing the largest variations. PMID:25821392

  8. Fluoride concentration in plaque in adolescents after topical application of different fluoride varnishes.

    Science.gov (United States)

    Sköld-Larsson, K; Modéer, T; Twetman, S

    2000-03-01

    The aim of the study was to measure the fluoride (F) concentration in plaque after a single topical application of different fluoride varnishes with contrasting levels of F. Thirty adolescents (12-17 years) with fixed orthodontic appliances were randomly assigned to one of three groups: Bifluoride (6% F), Duraphat (2.23% F) and Fluor Protector (0.1% F). The varnishes were applied after professional cleaning in one upper quadrant, leaving the opposite quadrant untreated according to the split-mouth technique. Pooled plaque samples from each quadrant were collected at baseline and 3 days, 7 days and 30 days after the varnish treatment, and fluoride was analysed by microdiffusion. All fluoride varnishes increased the fluoride concentration in plaque compared with baseline, and the mean values varied between 23 and 138 ng F/mg after 3 days, depending on varnish F concentration. Compared with the control quadrant, statistically significant elevations were recorded for Bifluoride after 3 days and 7 days and Duraphat after 3 days, while no significant differences were revealed in the Fluor Protector group. The fluoride concentration in plaque was back to baseline levels for all participants in the Duraphat group after 7 days, while some individuals in the Bifluoride and Fluor Protector groups still registered slightly increased levels after 30 days. The results suggest that fluoride varnish treatments resulted in elevated fluoride levels in plaque adjacent to fixed orthodontic appliances for a period of up to 1 week, although different patterns was disclosed for the various brands.

  9. Plaque formation and lactic acid production after use of amine fluoride/stannous fluoride mouthrinse

    NARCIS (Netherlands)

    Gerardu, V.A.M.; Buijs, M.; Loveren, C. van; Cate, J.M. ten

    2007-01-01

    The aim of this study was lo determine the effects of 3 wk of daily rinsing with amine fluoride/stannous fluoride (AmF/SnF2) mouthrinse on plaque formation at buccal and interproximal sites, and on the acid production in plaque. in a randomized clinical trial with 30 participants. The amount of plaq

  10. Cancer incidence and mortality in workers exposed to fluoride

    DEFF Research Database (Denmark)

    Grandjean, P; Olsen, J H; Jensen, O M;

    1992-01-01

    Although a recent bioassay showed increased frequency of bone cancer in rats with high oral intake of fluoride, the data are reported as equivocal evidence of carcinogenicity. In humans, occupational fluoride exposure may cause skeletal fluorosis, and our earlier follow-up of fluoride-exposed wor......Although a recent bioassay showed increased frequency of bone cancer in rats with high oral intake of fluoride, the data are reported as equivocal evidence of carcinogenicity. In humans, occupational fluoride exposure may cause skeletal fluorosis, and our earlier follow-up of fluoride...

  11. Influence of the method of fluoride administration on toxicity and fluoride concentrations in Japanese quail

    Science.gov (United States)

    Fleming, W.J.; Schuler, C.A.

    1988-01-01

    Young Japanese quail (Coturnix japonica) were administered NaF for 16 d either in their diet or by esophageal intubation. Based on the total fluoride ion (Emg F-) intake over the l6-d experimental period, fluoride administered by intubation was at least six times more toxic than that fed in the diet. Dietary concentrations of 1,000 ppm F- (Emg F- for 16 d = approx. 144) produced no mortality, whereas intubated doses produced 73% or greater mortality in all groups administered 54 mg F- /kg/d or more (Emg F- for 16 d _ approx. 23 mg). GraphIc companson of the regression of log F- ppm in femurs/mg F- intake showed that fluoride levels in the femurs of quail administered fluoride by intubation were higher than in those administered fluoride in the diet.

  12. Thermodynamic data-base for metal fluorides

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jae Hyung; Lee, Byung Gik; Kang, Young Ho and others

    2001-05-01

    This study is aimed at collecting useful data of thermodynamic properties of various metal fluorides. Many thermodynamic data for metal fluorides are needed for the effective development, but no report of data-base was published. Accordingly, the objective of this report is to rearrange systematically the existing thermodynamic data based on metal fluorides and is to use it as basic data for the development of pyrochemical process. The physicochemical properties of various metal fluorides and metals were collected from literature and such existing data base as HSC code, TAPP code, FACT code, JANAF table, NEA data-base, CRC handbook. As major contents of the thermodynamic data-base, the physicochemical properties such as formation energy, viscosity, density, vapor pressure, etc. were collected. Especially, some phase diagrams of eutectic molten fluorides are plotted and thermodynamic data of liquid metals are also compiled. In the future, the technical report is to be used as basic data for the development of the pyrochemical process which is being carried out as a long-term nuclear R and D project.

  13. Chemically modified field effect transistors with nitrite or fluoride selectivity

    NARCIS (Netherlands)

    Antonisse, Martijn M.G.; Snellink-Ruël, Bianca H.M.; Engbersen, Johan F.J.; Reinhoudt, David N.

    1998-01-01

    Polysiloxanes with different types of polar substituents are excellent membrane materials for nitrite and fluoride selective chemically modified field effect transistors (CHEMFETs). Nitrite selectivity has been introduced by incorporation of a cobalt porphyrin into the membrane; fluoride selectivity

  14. A simple and colorimetric fluoride receptor and its fluoride-responsive organogel

    Energy Technology Data Exchange (ETDEWEB)

    Yu Xudong, E-mail: 081022009@fudan.edu.cn [College of Science, Hebei University of Science and Technology, Yuhua Road 70, Shijiazhuang 050080 (China); Li Yajuan [College of Science, Hebei University of Science and Technology, Yuhua Road 70, Shijiazhuang 050080 (China); Yin Yaobing; Yu Decai [College of Science, Hebei University of Engineering, 199 South street of Guangming, Handan 056038 (China)

    2012-08-01

    In this paper, a new p-nitrophenylhydrozine-based anion receptor 1 containing cholesterol group had been designed and synthesized. It could selectively recognize fluoride among different anions tested with color changes from pale yellow to red for visual detection. Simultaneously, it could gel in cyclohexane, and the gel was also fluoride-responsive. When treated with TBAF (tetra-n-butylammonium fluoride), the gel could undergo gel-sol transition accompanied by color, morphology and surface changes. The binding mechanism had been investigated by UV-vis and {sup 1}HNMR (proton nuclear magnetic resonance spectra) titrations. From SEM (scanning electron microscope), SAXS (small-angle X-ray scattering), IR (Infrared Spectroscopy) and CA (contact angle) experiments, it was indicated that the addition of F{sup -} could destroy the molecule assembly of host 1 in the gel state, thus resulting in the gel-to-sol transition due to the binding site competition effect. To the best of our knowledge, this was the simplest fluoride-responsive organogel with high selectivity. Highlights: Black-Right-Pointing-Pointer A novel kind receptor for selective recognition of fluoride had been designed. Black-Right-Pointing-Pointer Its organogel was also fluoride-responsive. Black-Right-Pointing-Pointer This is the simplest fluoride-responsive organogel with high selectivity.

  15. Estimated fluoride doses from toothpastes should be based on total soluble fluoride.

    Science.gov (United States)

    Oliveira, Maria José L; Martins, Carolina C; Paiva, Saul M; Tenuta, Livia M A; Cury, Jaime A

    2013-11-01

    The fluoride dose ingested by young children may be overestimated if based on levels of total fluoride (TF) rather than levels of bioavailable fluoride (total soluble fluoride-TSF) in toothpaste. The aim of the present study was to compare doses of fluoride intake based on TF and TSF. Fluoride intake in 158 Brazilian children aged three and four years was determined after tooth brushing with their usual toothpaste (either family toothpaste (n = 80) or children's toothpaste (n = 78)). The estimated dose (mg F/day/Kg of body weight) of TF or TSF ingested was calculated from the chemical analysis of the toothpastes. Although the ingested dose of TF from the family toothpastes was higher than that from the children's toothpastes (0.074 ± 0.007 and 0.039 ± 0.003 mg F/day/Kg, respectively; p toothpaste was found regarding the ingested dose based on TSF (0.039 ± 0.005 and 0.039 ± 0.005 mg F/day/Kg, respectively; p > 0.05). The fluoride dose ingested by children from toothpastes may be overestimated if based on the TF of the product. This finding suggests that the ingested dose should be calculated based on TSF. Dose of TSF ingested by children is similar whether family or children's toothpaste is used.

  16. Vitrification of strontium-90 fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, D.M.; Schulz, W.W.

    1977-04-01

    At Hanford, strontium-90 is removed from high-level nuclear fuel reprocessing waste and converted to strontium-90 fluoride. This /sup 90/SrF/sub 2/ is doubly encapsulated in high-integrity containers which are placed under water in monitored storage pools. Conversion of /sup 90/SrF/sub 2/ to a more immobile compound may be necessary and/or desirable as part of the overall plan for the long-term management of Hanford Defense Wastes. Glasses containing up to 40 mass percent SrF/sub 2/ and having leach rates in the range 1 x 10/sup -8/ to 1 x 10/sup -5/ gram Sr/(m/sup 2/ . s) (1 x 10/sup -7/ to 1 x 10/sup -4/ g Sr/cm/sup 2/ . day)) have now been prepared. From 0.2 to 5 percent of the fluorine is volatilized during the melting of the glass batch at temperatures up to 1500/sup 0/K. At present, the heat generation limit for commercial glasses stored at a nuclear waste repository is 5 kW per canister. All glasses described here would exceed that limit by more than a factor of five. The stored /sup 90/SrF/sub 2/ may be treated separately from the bulk of Hanford waste, in which case it would be diluted to an acceptable power level with inert chemicals in the glass batch. Another option is to blend the /sup 90/SrF/sub 2/ with the bulk of the other Hanford wastes when those wastes are converted to some immobile form.

  17. Uses of sodium fluoride varnish in dental practice.

    Science.gov (United States)

    Chu, C H; Lo, Edward

    2008-06-01

    Fluoride varnish is developed to prolong the contact time between fluoride and tooth surface, so that the tooth becomes more resistant to caries attack. The active ingredient of fluoride varnish is usually 5% sodium fluoride, (22,600 ppm fluoride). Studies have found that fairly insoluble globules of calcium fluoride-like material formed on the tooth surface after topical fluoride application. These globules act as a reservoir of fluoride in the mouth for a prolonged period of time. Systematic reviews corroborate evidence for the efficacy of fluoride varnish in the prevention of dental caries. Sodium fluoride varnish is used to prevent caries development, arrest early enamel and even soft dentine caries through promotion of remineralization of carious tooth substance. It is also used to treat tooth hypersensitivity. Some use it as a provisional luting agent by itself or combined with other provisional luting agents for cementing provisional crowns. Fluoride varnish has recently gained much attention in dentistry because it is quick and easy to apply. It sets rapidly on teeth, and gagging and swallowing is unusual. Side-effects or complications of its use are rare. Studies show that fluoride varnish is safe for young children and the risk of dental fluorosis is minimal. The simplicity of its application makes it very suitable and practical for use in dental clinics and outreach dental services, especially in young children and in other special needs groups.

  18. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  19. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Poly(vinyl fluoride) resins. 175.270 Section 175... Substances for Use as Components of Coatings § 175.270 Poly(vinyl fluoride) resins. Poly(vinyl fluoride) resins identified in this section may be safely used as components of food-contact coatings...

  20. Health effects of fluoride pollution caused by coal burning

    Energy Technology Data Exchange (ETDEWEB)

    Ando, M.; Tadano, M.; Yamamoto, S.; Tamura, K.; Chen, X. [Regional Environment Division, National Institute for Environmental Studies, Tsukuba, 305-0083 Ibaraki (Japan); Asanuma, S. [Japan Institute of Rural Medicine, Usuda, Nagano (Japan); Watanabe, T. [Saku Central Hospital, Usuda, Nagano (Japan); Kondo, T. [Matsumoto Dental College, Shiojiri, Nagano (Japan); Sakurai, S. [Otsuma Women' s University, Tama, Tokyo (Japan); Ji, R.; Liang, C.; Cao, S. [Institute of Environmental Health and Engineering, Beijing (China); Hong, Z. [Shanxi Maternity and Children' s Hospital, Taiyuan (China)

    2001-04-23

    Recently a huge amount of fluoride in coal has been released into indoor environments by the combustion of coal and fluoride pollution seems to be increasing in some rural areas in China. Combustion of coal and coal bricks is the primary source of gaseous and aerosol fluoride and these forms of fluoride can easily enter exposed food products and the human respiratory tract. Major human fluoride exposure was caused by consumption of fluoride contaminated food, such as corn, chilies and potatoes. For each diagnostic syndrome of dental fluorosis, a log-normal distribution was observed on the logarithm of urinary fluoride concentration in students in China. Urinary fluoride content was found to be a primary health indicator of the prevalence of dental fluorosis in the community. In the fluorosis areas, osteosclerosis in skeletal fluorosis patients was observed with a high prevalence. A biochemical marker of bone resorption, urinary deoxypyridinoline content was much higher in residents in China than in residents in Japan. It was suggested that bone resorption was stimulated to a greater extent in residents in China and fluoride may stimulate both bone resorption and bone formation. Renal function especially glomerular filtration rate was very sensitive to fluoride exposure. Inorganic phosphate concentrations in urine were significantly lower in the residents in fluorosis areas in China than in non-fluorosis area in China and Japan. Since airborne fluoride from the combustion of coal pollutes extensively both the living environment and food, it is necessary to reduce fluoride pollution caused by coal burning.

  1. Synthesis of reagents for fluoride technologies

    Institute of Scientific and Technical Information of China (English)

    Gordienko; P.; S.; Kolzunov; V.; A.; Dostovalov; V.; A.; Kaidalova; T.; A.

    2005-01-01

    Growing demand for fluorinating reagents to be used in rare-metal industry has stimulated conducting research in the field of production for these reagents. That is why the fluorinating reagents production has recently formed an independent segment of industry. Main industrial fluorinating reagents include hydrofluoric acid, anhydrous hydrogen fluoride, technical ammonium hydrodifluoride, fluorosilicic acid and its salts. To produce technical etching acid, fluor-spar with calcium fluoride content at least 92% is used in most cases. To produce anhydrous hydrogen fluoride, fluor-spar with calcium fluoride content 96 %-97 % is necessary. The fluorine-containing raw materials refinement from silica by means of flotation makes the fluorinating reagents production substantially more expensive. In this work we have attempted to process unconcentrated raw materials by fluorine removal in the form of volatile silicon tetrafluoride. In this process silicon tetrafluoride was recovered by liquid ammonia with subsequent hydrolysis of the formed ammonia hexafluorosilicate. Hydrolysis occurred according to the reaction:(NH4)2 SiF6 + 4NH3 + 2 H2O= 6NH4F+ SiO2 The products of the ammonia hexafluorosilicate hydrolysis included ammonia fluoride and amorphous silica gel ("white soot") as by-product. This "white soot" was of high purity-with main component content 99.95% and total admixture content 0.05%. Silica gel is a superfine material with specific surface of 267.6 m2/g and is recommended as filler in the production of rubber, plastics and for other applications.Ammonia fluoride was transformed into ammonia hydrodifluoride (main processing product) according to the reaction:2NH4F→NH3+NH4 HF2 It was stated that the NH4F: NH4 HF2 ratio depends on boiling point temperature-with its increase the ammonia hydrofluoride concentration in solution increases as well.

  2. Enhanced fluoride sorption by mechanochemically activated kaolinites.

    Science.gov (United States)

    Meenakshi, S; Sundaram, C Sairam; Sukumar, Rugmini

    2008-05-01

    Kaolinite clay obtained from the mines was processed and studied for its fluoride sorption capacity. The surface area of the clay mineral was increased from 15.11 m(2)/g (raw) to 32.43 m(2)/g (activated) by mechanochemical activation. Batch adsorption studies were conducted to optimize various equilibrating conditions like the effect of contact time, dosage, pH for both raw and micronized kaolinites (RK and MK). The effect of other interfering anions on the defluoridation capacity (DC) of the sorbents was studied. Sorption of fluoride by the sorbents was observed over a wide pH range of 3-11. The studies revealed there is an enhanced fluoride sorption on MK. FTIR and XRD were used for the characterization of the sorbent. The surface morphology of the clay material was observed using SEM. The adsorption of fluoride was studied at three different temperatures, viz., 303, 313 and 323 K. The sorption data obtained at optimized conditions were subjected to Freundlich and Langmuir isotherms. Sorption intensity (1/n) (0.770-0.810) has been evaluated using Freundlich isotherm, whereas the values of sorption capacity Q(0) (0.609, 0.714 and 0.782 mg/g) and binding energy b (0.158, 0.145 and 0.133 L/mg) at three different temperatures have been estimated using Langmuir isotherm. Adsorption process was found to be controlled by both Freundlich and Langmuir isotherms. Thermodynamic studies revealed that the sorption of fluoride on MK is endothermic and a spontaneous process. The kinetic studies indicate that the sorption of fluoride on MK follows pseudo-first-order and intraparticle diffusion models.

  3. Enhanced fluoride sorption by mechanochemically activated kaolinites

    Energy Technology Data Exchange (ETDEWEB)

    Meenakshi, S. [Department of Chemistry, Gandhigram Rural University, Gandhigram 624302, Tamilnadu (India)], E-mail: drs_meena@rediffmail.com; Sundaram, C. Sairam [Department of Science and Humanities, Karaikal Polytechnic College, Karaikal 609609, Puducherry (India); Sukumar, Rugmini [Chemical Sciences and Technologies, Regional Research Laboratory, Trivandrum 695019, Kerala (India)

    2008-05-01

    Kaolinite clay obtained from the mines was processed and studied for its fluoride sorption capacity. The surface area of the clay mineral was increased from 15.11 m{sup 2}/g (raw) to 32.43 m{sup 2}/g (activated) by mechanochemical activation. Batch adsorption studies were conducted to optimize various equilibrating conditions like the effect of contact time, dosage, pH for both raw and micronized kaolinites (RK and MK). The effect of other interfering anions on the defluoridation capacity (DC) of the sorbents was studied. Sorption of fluoride by the sorbents was observed over a wide pH range of 3-11. The studies revealed there is an enhanced fluoride sorption on MK. FTIR and XRD were used for the characterization of the sorbent. The surface morphology of the clay material was observed using SEM. The adsorption of fluoride was studied at three different temperatures, viz., 303, 313 and 323 K. The sorption data obtained at optimized conditions were subjected to Freundlich and Langmuir isotherms. Sorption intensity (1/n) (0.770-0.810) has been evaluated using Freundlich isotherm, whereas the values of sorption capacity Q{sup 0} (0.609, 0.714 and 0.782 mg/g) and binding energy b (0.158, 0.145 and 0.133 L/mg) at three different temperatures have been estimated using Langmuir isotherm. Adsorption process was found to be controlled by both Freundlich and Langmuir isotherms. Thermodynamic studies revealed that the sorption of fluoride on MK is endothermic and a spontaneous process. The kinetic studies indicate that the sorption of fluoride on MK follows pseudo-first-order and intraparticle diffusion models.

  4. Synthesis of complex fluorides for optical applications

    Science.gov (United States)

    Stepleton, Seth Eugene

    Large single crystals of alkali metal fluorides are desirable for many reasons. Fluoride laser crystals have a wide transmission range and on account of their low phonon energies, many efficient laser emissions have been obtained from 285 nm to 4.34 microm.1,2 Inorganic fluoride single crystals feature large bandgaps, very wide optical transmittance ranges from vacuum-ultraviolet (VUV) to mid-IR wavelength regions, lower refractive indices than those of oxides, and typically lower phonon energies (which drastically reduce multiphonon relaxation rates of rare earth ions).3 The main goal of this work was to investigate the hydrothermal synthesis of alkali metal fluorides. Melt techniques have been used thoroughly to research a variety of fluoride systems and showed many phases that were inaccessible due to incongruent melting or phase stability. The existence of these phases was shown but never characterized or grown as a crystalline material. Solution growth in supercritical water was an ideal way to attempt the synthesis of novel compounds and phases. New synthetic routes to known phases and compounds also arose as a part of this work. Optically clear colorless crystals of K2BeF4 were synthesized up to 2 mm in size, and showed no phase transitions up to 1029 K, which suggests paraelectricitys at room temperature, contradicting previous reports.4 Attempts to incorporate a rare earth ion into the fluoroberyllate lattice proved unsuccessful however reactions between beryllium fluoride and lanthanide fluorides could be exploited as a synthetic route to single crystal rare earth fluorides. Hydrothermal reactions with KF produced crystals of three different phases: hexagonal KY2F7, trigonal KYF4 and orthorhombic K2YF5. All were optically clear, colorless crystals, with the K2YF5 crystals growing the largest. This compound is beneficial due to its application as a radiation dosimeter and laser host. 5,6 Optical quality colorless crystals of RbY2F7 and CsY2F7 up to 4 mm in

  5. Comparative evaluation of fluoride release from PRG-composites and compomer on application of topical fluoride: An in-vitro study

    Directory of Open Access Journals (Sweden)

    Dhull K

    2009-03-01

    Full Text Available Aims and Objective: To determine the fluoride release from Giomer and Compomer, using different topical fluoride regimes, and to compare the amount of fluoride release from giomer with that of compomer. Materials and Method: Forty-eight specimens of each giomer and compomer were divided into four treatment groups, namely, control group, fluoridated dentifrice (500 ppm once daily group, fluoridated dentifrice (500 ppm twice daily group, fluoridated dentifrice (500 ppm once daily + fluoridated mouthwash (225 ppm group. Each specimen was suspended in demineralizing solution for six hours and remineralizing solution for 18 hours. Fluoride release was measured in both the demineralizing solution and remineralizing solution daily for seven days. Total daily fluoride release for each specimen was calculated by adding the amount released in the demineralizing solution to that released in remineralizing solution. Results and Conclusion: The fluoride release (ppm was found to be more in Giomer when compared to Compomer. The fluoride released from Giomer and Compomer was significantly greater in the acidic demineralizing solution than in the neutral remineralizing solution. It was found that increasing fluoride exposure significantly increased fluoride release from the giomer and compomer. It was found that the fluoride release from the subgroups of giomer and compomer was in the following order: fluoridated dentifrice twice daily > fluoridated dentifrice once daily + fluoridated mouthwash > fluoridated dentifrice once daily > control group. It was found that the giomer showed a greater fluoride uptake than the compomer.

  6. Fluoride in Drinking Water -Its Effects and Removal

    Directory of Open Access Journals (Sweden)

    Ram Gopal

    1985-01-01

    Full Text Available Occurrence of fluoride in water, its metabolism, excretion. effect oingestion in human and cattle system and methods of fluoridation and defluoridation have been discussed. The presence of fluoride in waters occurring in India, with special reference to Rajasthan desert has been reviewed. Based on the survey and physico-chemical analyses of about 2,700 water samples of Rajasthan, distribution of fluoride in this area has been discussed wrth reference to drinking water standards. A water resources map showing concentrations of fluoride in four arid districts of Rajasthan is also presented.

  7. [Chemical form changes of exogenous water solution fluoride and bioavailability in tea garden soil].

    Science.gov (United States)

    Cai, Hui-Mei; Peng, Chuan-Yi; Chen, Jing; Hou, Ru-Yan; Wan, Xiao-Chun

    2013-11-01

    Pot experiments and the sequential extraction method were conducted to study the chemical form changes of exogenous water solution fluoride in tea garden soil and their contribution to fluoride accumulation of tea plant. The results showed that the background concentration of all chemical forms of fluoride had little changes with time treatment, which was in a relatively stable state. The exogenous water solution fluoride adding to the soils was rapidly transformed to other fractions. Under the 10 mg x kg(-1) fluoride treatment, the concentration of water solution fluoride increased firstly and then decreased with time treatment, the concentration of organic matter fluoride and Fe/Mn oxides fluoride decreased, the concentration of exchangeable fluoride was not different before and after the treatment (P > 0.05), and the concentration of residual fluoride was in a relatively stable state; under the 200 mg x kg(-1) fluoride treatment, the concentration of water solution fluoride, Fe/Mn oxides fluoride and organic matter fluoride decreased with time treatment, the concentration of exchangeable fluoride increased firstly and then decreased, showed no difference before and after the treatment (P > 0.05), and the concentration of residual fluoride increased, with some differences compared with 10 mg x kg(-1) fluoride treatment. The concentration of total fluoride in root, stem and leaf had significant differences under 0-10 mg x kg(-1) fluoride treatment (P treatment (P > 0.05). Step regression analysis suggested the contribution of all chemical forms of fluoride to the concentration of water solution fluoride and total fluoride of root, stem and leaf had some differences, there was a remarkable regression relationship among the content of total fluoride in leaf and water solution fluoride, organic matter fluoride, Fe/Mn oxides fluoride and residual fluoride in soil, however, no significant difference for water solution fluoride of leaf was found.

  8. Estimated Fluoride Doses from Toothpastes Should be Based on Total Soluble Fluoride

    Directory of Open Access Journals (Sweden)

    Jaime A. Cury

    2013-11-01

    Full Text Available The fluoride dose ingested by young children may be overestimated if based on levels of total fluoride (TF rather than levels of bioavailable fluoride (total soluble fluoride—TSF in toothpaste. The aim of the present study was to compare doses of fluoride intake based on TF and TSF. Fluoride intake in 158 Brazilian children aged three and four years was determined after tooth brushing with their usual toothpaste (either family toothpaste (n = 80 or children’s toothpaste (n = 78. The estimated dose (mg F/day/Kg of body weight of TF or TSF ingested was calculated from the chemical analysis of the toothpastes. Although the ingested dose of TF from the family toothpastes was higher than that from the children’s toothpastes (0.074 ± 0.007 and 0.039 ± 0.003 mg F/day/Kg, respectively; p 0.05. The fluoride dose ingested by children from toothpastes may be overestimated if based on the TF of the product. This finding suggests that the ingested dose should be calculated based on TSF. Dose of TSF ingested by children is similar whether family or children’s toothpaste is used.

  9. Zirconium fluoride glass - Surface crystals formed by reaction with water

    Science.gov (United States)

    Doremus, R. H.; Bansal, N. P.; Bradner, T.; Murphy, D.

    1984-01-01

    The hydrated surfaces of a zirconium barium fluoride glass, which has potential for application in optical fibers and other optical elements, were observed by scanning electron microscopy. Crystalline zirconium fluoride was identified by analysis of X-ray diffraction patterns of the surface crystals and found to be the main constituent of the surface material. It was also found that hydrated zirconium fluorides form only in highly acidic fluoride solutions. It is possible that the zirconium fluoride crystals form directly on the glass surface as a result of its depletion of other ions. The solubility of zirconium fluoride is suggested to be probably much lower than that of barium fluoride (0.16 g/100 cu cm at 18 C). Dissolution was determined to be the predominant process in the initial stages of the reaction of the glass with water. Penetration of water into the glass has little effect.

  10. Innovative Monitoring of Atmospheric Gaseous Hydrogen Fluoride

    Science.gov (United States)

    Bonari, Alessandro; Pompilio, Ilenia; Monti, Alessandro; Arcangeli, Giulio

    2016-01-01

    Hydrogen fluoride (HF) is a basic raw material for a wide variety of industrial products, with a worldwide production capacity of more than three million metric tonnes. A novel method for determining particulate fluoride and gaseous hydrogen fluoride in air is presented herewith. Air was sampled using miniaturised 13 mm Swinnex two-stage filter holders in a medium-flow pumping system and through the absorption of particulate fluoride and HF vapours on cellulose ester filters uncoated or impregnated with sodium carbonate. Furthermore, filter desorption from the holders and the extraction of the pentafluorobenzyl ester derivative based on solid-phase microextraction were performed using an innovative robotic system installed on an xyz autosampler on-line with gas chromatography (GC)/mass spectrometry (MS). After generating atmospheres of a known concentration of gaseous HF, we evaluated the agreement between the results of our sampling method and those of the conventional preassembled 37 mm cassette (±8.10%; correlation coefficient: 0.90). In addition, precision (relative standard deviation for n = 10, 4.3%), sensitivity (0.2 μg/filter), and linearity (2.0–4000 μg/filter; correlation coefficient: 0.9913) were also evaluated. This procedure combines the efficiency of GC/MS systems with the high throughput (96 samples/day) and the quantitative accuracy of pentafluorobenzyl bromide on-sample derivatisation. PMID:27829835

  11. Innovative Monitoring of Atmospheric Gaseous Hydrogen Fluoride

    Directory of Open Access Journals (Sweden)

    Stefano Dugheri

    2016-01-01

    Full Text Available Hydrogen fluoride (HF is a basic raw material for a wide variety of industrial products, with a worldwide production capacity of more than three million metric tonnes. A novel method for determining particulate fluoride and gaseous hydrogen fluoride in air is presented herewith. Air was sampled using miniaturised 13 mm Swinnex two-stage filter holders in a medium-flow pumping system and through the absorption of particulate fluoride and HF vapours on cellulose ester filters uncoated or impregnated with sodium carbonate. Furthermore, filter desorption from the holders and the extraction of the pentafluorobenzyl ester derivative based on solid-phase microextraction were performed using an innovative robotic system installed on an xyz autosampler on-line with gas chromatography (GC/mass spectrometry (MS. After generating atmospheres of a known concentration of gaseous HF, we evaluated the agreement between the results of our sampling method and those of the conventional preassembled 37 mm cassette (±8.10%; correlation coefficient: 0.90. In addition, precision (relative standard deviation for n=10, 4.3%, sensitivity (0.2 μg/filter, and linearity (2.0–4000 μg/filter; correlation coefficient: 0.9913 were also evaluated. This procedure combines the efficiency of GC/MS systems with the high throughput (96 samples/day and the quantitative accuracy of pentafluorobenzyl bromide on-sample derivatisation.

  12. Oral fluoride retention after professional topical application in children with caries activity: comparison between 1.23% fluoride foam and fluoride gel

    Directory of Open Access Journals (Sweden)

    Cecília Claudia Costa Ribeiro

    2008-01-01

    Full Text Available Objective: This study evaluated fluoride retention in the saliva of children with caries activity after topical fluoride application in the form of gel and foam. Methods: A cross-sectional, blind and randomized study, conducted with ten caries-active children aged between 8 and 10 years, in two stage, with a washout interval of two weeks between them. The treatments consisted of: a application of 2mL acidulated phosphate fluoride of the gel type in a mold and b application of 2mL acidulated phosphate fluoride of the foam type in a mold. After the washout, the treatments were inverted. Non-stimulated saliva was collected from the children at the times of 5, 15, 30 and 60 minutes after topical fluoride application. For statistical analysis the Student’s-t test was used, with a level of significance of 5%. Results: Saliva analysis was performed using a fluoride-specific electrode (ISE25F/ Radiometer, Copenhagen, Denmark at the Aquatic Science Center of the Federal University of Marana, which revealed differences after 5 minutes (p=0.0055 and 15 minutes (p=0.0208. The topical application of fluoride in the gel form revealed a higher concentration of fluoride in the saliva. Conclusion: There were differences in the retention of fluoride in the saliva of children with caries activity after the topical application of fluoride gel and the topical application of fluoride foam after 5 and 15 minutes of their application. The topical application of fluoride foam is recommended, on the basis of the lower probability of toxicity during its use.

  13. Effects of fluoridated milk on root dentin remineralization.

    Directory of Open Access Journals (Sweden)

    Wolfgang H Arnold

    Full Text Available The prevalence of root caries is increasing with greater life expectancy and number of retained teeth. Therefore, new preventive strategies should be developed to reduce the prevalence of root caries. The aim of this study was to investigate the effects of fluoridated milk on the remineralization of root dentin and to compare these effects to those of sodium fluoride (NaF application without milk.Thirty extracted human molars were divided into 6 groups, and the root cementum was removed from each tooth. The dentin surface was demineralized and then incubated with one of the following six solutions: Sodium chloride NaCl, artificial saliva, milk, milk+2.5 ppm fluoride, milk+10 ppm fluoride and artificial saliva+10 ppm fluoride. Serial sections were cut through the lesions and investigated with polarized light microscopy and quantitative morphometry, scanning electron microscopy (SEM and energy-dispersive X-ray spectroscopy (EDS. The data were statistically evaluated using a one-way ANOVA for multiple comparisons.The depth of the lesion decreased with increasing fluoride concentration and was the smallest after incubation with artificial saliva+10 ppm fluoride. SEM analysis revealed a clearly demarcated superficial remineralized zone after incubation with milk+2.5 ppm fluoride, milk+10 ppm fluoride and artificial saliva+10 ppm fluoride. Ca content in this zone increased with increasing fluoride content and was highest after artificial saliva+10 ppm fluoride incubation. In the artificial saliva+10 ppm fluoride group, an additional crystalline layer was present on top of the lesion that contained elevated levels of F and Ca.Incubation of root dentin with fluoridated milk showed a clear effect on root dentin remineralization, and incubation with NaF dissolved in artificial saliva demonstrated a stronger effect.

  14. Water fluoridation in 40 Brazilian cities: 7 year analysis

    Directory of Open Access Journals (Sweden)

    Suzely Adas Saliba MOIMAZ

    2013-01-01

    Full Text Available Objectives Fluoride levels in the public water supplies of 40 Brazilian cities were analyzed and classified on the basis of risk/benefit balance. Material and Methods Samples were collected monthly over a seven-year period from three sites for each water supply source. The samples were analyzed in duplicate in the laboratory of the Center for Research in Public Health - UNESP using an ion analyzer coupled to a fluoride-specific electrode. Results A total of 19,533 samples were analyzed, of which 18,847 were artificially fluoridated and 686 were not artificially fluoridated. In samples from cities performing water fluoridation, 51.57% (n=9,720 had fluoride levels in the range of 0.55 to 0.84 mg F/L; 30.53% (n=5,754 were below 0.55 mg F/L and 17.90% (n=3,373 were above 0.84 mg F/L (maximum concentration=6.96 mg F/L. Most of the cities performing fluoridation that had a majority of samples with fluoride levels above the recommended parameter had deep wells and more than one source of water supply. There was some variability in the fluoride levels of samples from the same site and between collection sites in the same city. Conclusions The majority of samples from cities performing fluoridation had fluoride levels within the range that provides the best combination of risks and benefits, minimizing the risk of dental fluorosis while preventing dental caries. The conduction of studies about water distribution systems is suggested in cities with high natural fluoride concentrations in order to optimize the use of natural fluoride for fluoridation costs and avoid the risk of dental fluorosis.

  15. Water Fluoridation: A Critical Review of the Physiological Effects of Ingested Fluoride as a Public Health Intervention

    Directory of Open Access Journals (Sweden)

    Stephen Peckham

    2014-01-01

    Full Text Available Fluorine is the world’s 13th most abundant element and constitutes 0.08% of the Earth crust. It has the highest electronegativity of all elements. Fluoride is widely distributed in the environment, occurring in the air, soils, rocks, and water. Although fluoride is used industrially in a fluorine compound, the manufacture of ceramics, pesticides, aerosol propellants, refrigerants, glassware, and Teflon cookware, it is a generally unwanted byproduct of aluminium, fertilizer, and iron ore manufacture. The medicinal use of fluorides for the prevention of dental caries began in January 1945 when community water supplies in Grand Rapids, United States, were fluoridated to a level of 1 ppm as a dental caries prevention measure. However, water fluoridation remains a controversial public health measure. This paper reviews the human health effects of fluoride. The authors conclude that available evidence suggests that fluoride has a potential to cause major adverse human health problems, while having only a modest dental caries prevention effect. As part of efforts to reduce hazardous fluoride ingestion, the practice of artificial water fluoridation should be reconsidered globally, while industrial safety measures need to be tightened in order to reduce unethical discharge of fluoride compounds into the environment. Public health approaches for global dental caries reduction that do not involve systemic ingestion of fluoride are urgently needed.

  16. Effects of long term exposure to hydrogen fluoride on grapevines

    Energy Technology Data Exchange (ETDEWEB)

    Murray, F.

    1984-01-01

    Grapevines Vitis vinifera L. Shiraz were exposed to hydrogen fluoride in open-top chambers for 189 days at mean atmospheric fluoride concentrations of 0.27, 0.17 or 0.07 ..mu..g HFm/sup -3/. Grapevines growing under ambient conditions outside the chambers were exposed to a mean atmospheric fluoride concentration of 0.08 ..mu..g HFm/sup -3/. The maximum leaf fluoride concentrations associated with these treatments were 62, 27, 9 and 15 ..mu..g Fg/sup -1/, respectively. Foliar necrosis was first observed on grapevines exposed to 0.27 and 0.17 ..mu..g HFm/sup -3/ after 83 and 99 days, respectively. Exposure to fluoride increased the fluoride content of berries and peduncles, and reduced leaf chlorophyll a and total chlorophyll concentration at both mid-season and harvest. Exposure to 0.17 ..mu..g HF m/sup -3/ was associated with higher total acid content of grapes than other treatments. Fluoride had no significant effect on bunch weight, number of bunches, grape yield, grape water or potential alcohol content, leaf chlorophyll b or leaf protein concentration. The high accumulation of fluoride in peduncles, but low fluoride accumulation in berries, suggests that the peduncle acts to block the translocation of fluoride from sites of uptake to the fruit. 42 references, 1 figure, 5 tables.

  17. Caries prevention through the fluoridation of milk. A review.

    Science.gov (United States)

    Bánóczy, Jolán; Rugg-Gunn, Andrew J

    2007-10-01

    The aim of this review is to give an overview of 50 years experience of milk fluoridation and draw conclusions about the applicability of the method. Fluoridated milk was first investigated in the early 1950s, almost simultaneously in Switzerland, the USA and Japan. Stimulated by the favourable results obtained from these early studies, the establishment of The Borrow Dental Milk Foundation (subsequently The Borrow Foundation) in England gave an excellent opportunity for further research, both clinical and non-clinical, and a productive collaboration with the World Health Organization from the early 1980s onwards. Numerous peer-reviewed publications in international journals showed clearly the bioavailability of fluoride in milk, and increased concentrations of fluoride in saliva, dental plaque, dental enamel and dentine, and urine, after consumption of fluoridated milk. Clinical trials were initiated in the 1980s--some of these can be classed as randomised controlled trials, while most of the clinical studies were community preventive programs. These evaluations showed clearly that the optimal daily intake of fluoride in milk is effective in preventing dental caries. At present, milk fluoridation programs are running continuously in about ten countries of the world. Fluoridation of milk can be recommended as a caries preventive measure where the fluoride concentration in drinking water is suboptimal, caries experience in children is significant, and there is an existing school milk program. The program should aim to provide fluoridated milk for at least 200 days per year and should commence before the children are 4 years of age.

  18. Arsenic from community water fluoridation: quantifying the effect.

    Science.gov (United States)

    Peterson, Emily; Shapiro, Howard; Li, Ye; Minnery, John G; Copes, Ray

    2016-04-01

    Community water fluoridation is a WHO recommended strategy to prevent dental carries. One debated concern is that hydrofluorosilicic acid, used to fluoridate water, contains arsenic and poses a health risk. This study was undertaken to determine if fluoridation contributes to arsenic in drinking water, to estimate the amount of additional arsenic associated with fluoridation, and compare this to the National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard and estimates from other researchers. Using surveillance data from Ontario drinking water systems, mixed effects linear regression was performed to examine the effect of fluoridation status on the difference in arsenic concentration between raw water and treated water samples. On average, drinking water treatment was found to reduce arsenic levels in water in both fluoridated and non-fluoridated systems by 0.2 μg/L. However, fluoridated systems were associated with an additional 0.078 μg/L (95% CI 0.021, 0.136) of arsenic in water when compared to non-fluoridated systems (P = 0.008) while controlling for raw water arsenic concentrations, types of treatment processes, and source water type. Our estimate is consistent with concentrations expected from other research and is less than 10% of the NSF/ANSI standard of 1 μg/L arsenic in water. This study provides further information to inform decision-making regarding community water fluoridation.

  19. Parabens do not increase fluoride uptake by dental enamel

    Directory of Open Access Journals (Sweden)

    Vanessa Silva Tramontino

    2010-04-01

    Full Text Available Objective: To evaluate whether methylparaben and propylparaben, which present a similar chemical structure, increase fluoride uptake by demineralized dental enamel when present in buffered solutions. Methods: The study comprised an in vitro experiment using blocks of bovine dental enamel with artificial carious lesions. Enamel blocks were exposed to the following treatment (n=12: fluoride solution (200 ppm fluoride - control; solution containing fluoride and 13 mM methylparaben; solution containing fluoride and 13 mM propylparaben in 35% propylene glycol; solution containing fluoride in 35% propylene glycol. All solutions were buffered (0.01 M cacodilate and the pH was adjusted to 6.27. The blocks were exposed to the treatment solutions in the proportion of 2 ml per mm2 of exposed enamel area and fluoride formed was estimated after removing an enamel layer by acid etching. Fluoride extracted was determined by ion specific electrode and the amount of enamel removed was estimated by phosphorus analysis. ANOVA followed by Tukey’s test were used for statistical analysis, with significance level at 5%. Results: The dental blocks of treatment groups containing both parabens and the control group presented similar fluoride concentration in enamel and no statistical difference was observed among them (p>0.05. The dental blocks of treatment group containing fluoride and propylene glycol showed the lowest value of fluoride present in enamel, which was significantly different from the control and fluoride and methylparaben groups (p<0.05. Conclusion: Methyl and propylparaben in a buffered solution do not enhance fluoride uptake by demineralized dental enamel.

  20. Analysis of differentially expressed genes between fluoride-sensitive and fluoride-endurable individuals in midgut of silkworm, Bombyx mori.

    Science.gov (United States)

    Qian, Heying; Li, Gang; He, Qingling; Zhang, Huaguang; Xu, Anying

    2016-08-15

    Fluoride tolerance is an economically important trait of silkworm. Near-isogenic lines (NILs) of the dominant endurance to fluoride (Def) gene in Bombyx mori has been constructed before. Here, we analyzed the gene expression profiles of midgut of fluoride-sensitive and fluoride-endurable individuals of Def NILs by using high-throughput Illumina sequencing technology and bioinformatics tools, and identified differentially expressed genes between these individuals. A total of 3,612,399 and 3,567,631 clean tags for the libraries of fluoride-endurable and fluoride-sensitive individuals were obtained, which corresponded to 32,933 and 43,976 distinct clean tags, respectively. Analysis of differentially expressed genes indicates that 241 genes are differentially expressed between the two libraries. Among the 241 genes, 30 are up-regulated and 211 are down-regulated in fluoride-endurable individuals. Pathway enrichment analysis demonstrates that genes related to ribosomes, pancreatic secretion, steroid biosynthesis, glutathione metabolism, steroid biosynthesis, and glycerolipid metabolism are down-regulated in fluoride-endurable individuals. qRT-PCR was conducted to confirm the results of the DGE. The present study analyzed differential expression of related genes and tried to find out whether the crucial genes were related to fluoride detoxification which might elucidate fluoride effect and provide a new way in the fluorosis research.

  1. Fluoride ion encapsulation by Mg[superscript 2+] ions and phosphates in a fluoride riboswitch

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Aiming; Rajashankar, Kanagalaghatta R.; Patel, Dinshaw J. (Cornell); (MSKCC)

    2012-06-26

    Significant advances in our understanding of RNA architecture, folding and recognition have emerged from structure-function studies on riboswitches, non-coding RNAs whose sensing domains bind small ligands and whose adjacent expression platforms contain RNA elements involved in the control of gene regulation. We now report on the ligand-bound structure of the Thermotoga petrophila fluoride riboswitch, which adopts a higher-order RNA architecture stabilized by pseudoknot and long-range reversed Watson-Crick and Hoogsteen A {sm_bullet} U pair formation. The bound fluoride ion is encapsulated within the junctional architecture, anchored in place through direct coordination to three Mg{sup 2+} ions, which in turn are octahedrally coordinated to water molecules and five inwardly pointing backbone phosphates. Our structure of the fluoride riboswitch in the bound state shows how RNA can form a binding pocket selective for fluoride, while discriminating against larger halide ions. The T. petrophila fluoride riboswitch probably functions in gene regulation through a transcription termination mechanism.

  2. Fluoride ion encapsulation by Mg2+ ions and phosphates in a fluoride riboswitch.

    Science.gov (United States)

    Ren, Aiming; Rajashankar, Kanagalaghatta R; Patel, Dinshaw J

    2012-05-13

    Significant advances in our understanding of RNA architecture, folding and recognition have emerged from structure-function studies on riboswitches, non-coding RNAs whose sensing domains bind small ligands and whose adjacent expression platforms contain RNA elements involved in the control of gene regulation. We now report on the ligand-bound structure of the Thermotoga petrophila fluoride riboswitch, which adopts a higher-order RNA architecture stabilized by pseudoknot and long-range reversed Watson-Crick and Hoogsteen A•U pair formation. The bound fluoride ion is encapsulated within the junctional architecture, anchored in place through direct coordination to three Mg(2+) ions, which in turn are octahedrally coordinated to water molecules and five inwardly pointing backbone phosphates. Our structure of the fluoride riboswitch in the bound state shows how RNA can form a binding pocket selective for fluoride, while discriminating against larger halide ions. The T. petrophila fluoride riboswitch probably functions in gene regulation through a transcription termination mechanism.

  3. The Effect of Calcium Pre-Rinse on Salivary Fluoride After 900 ppm Fluoride Mouthwash: A Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    Nahid Ramazani

    2013-01-01

    Full Text Available Objective: Calcium fluoride deposit during fluoride application. Uptake and retention of fluoride by saliva depends generally on the concentration of calcium. In this study, the ef-fect of calcium pre-rinse on salivary fluoride concentration after a 900 ppm fluoride mouthwash was investigated.Materials and Methods: This cross-over double-blind randomized clinical trial was con-ducted in a girls' dormitory in Zahedan University of Medical Sciences, southeast Iran. In this study, 42 female dental students were chosen using simple randomization. During the first phase, 21 subjects (group A used fluoride rinse (F regimen and the remaining (group B used calcium pre-rinse followed immediately by fluoride rinse (Ca + F regi-men. In the second phase, participants rinsed using the mouthwashes not previously used. Prior to each phase prophylaxis was performed and no fluoridated product was used dur-ing a two-week interval between the phases. Salivary samples were taken immediately be-fore (baseline, 1 and 12 hours after rinsing. The salivary fluoride concentration was de-termined using fluoride sensitive electrode. Repeated measures ANOVA was used for sta-tistical analysis and the significance level was set at P<0.05.Results: There was significant difference between fluoride concentrations at different time points (P< 0.001. Significant differences were observed when the different time points of two regimens were examined. In contrast to this, the baseline before using F regimen and the baseline before using Ca + F regimen did not show any significance (P= 0.070.Conclusion: Pre-rinsing with calcium before fluoride is recommended because of signifi-cant increases in salivary fluoride concentration.

  4. Revisiting the thermochemistry of chlorine fluorides

    CERN Document Server

    Sánchez, H R

    2016-01-01

    In this work, accurate calculations of standard enthalpies of formation of chlorine fluorides (ClF$_n$, n=1--7; Cl$_2$F and Cl$_3$F$_2$) were performed through the isodesmic reactions scheme. It is argued that, for many chlorine fluorides, the gold standard method of quantum chemistry (CCSD(T)) is not capable to predict enthalpy values nearing chemical accuracy if atomization scheme is used. This is underpinned by a thorough analysis of total atomization energy results and the inspection of multireference features of these compounds. Other thermodynamic quantities were also calculated at different temperatures. In order to complement the energetic description, elimination curves were studied through density functional theory as a computationally affordable alternative to highly correlated wave function-based methods.

  5. Fluoridation and tooth wear in Irish adults.

    LENUS (Irish Health Repository)

    Burke, F M

    2010-10-01

    The aim of this study was to determine the prevalence of tooth wear in adults in Ireland and its relationship with water fluoridation. The National Survey of Adult Oral Health was conducted in 2000\\/2001. Tooth wear was determined using a partial mouth examination assessing the upper and lower anterior teeth. A total of 2456 subjects were examined. In this survey, increasing levels and severity of tooth wear were associated with ageing. Men were more affected by tooth wear and were more likely to be affected by severe tooth wear than women. It was found that age, and gender were significant predictors of tooth wear (P < 0.01). Overall, there was no significant relationship between fluoridation and tooth wear in this study.

  6. Fluoride complexation of element 104, rutherfordium.

    Science.gov (United States)

    Haba, Hiromitsu; Tsukada, Kazuaki; Asai, Masato; Toyoshima, Atsushi; Akiyama, Kazuhiko; Nishinaka, Ichiro; Hirata, Masaru; Yaita, Tsuyoshi; Ichikawa, Shin-Ichi; Nagame, Yuichiro; Yasuda, Ken-Ichiro; Miyamoto, Yutaka; Kaneko, Tetsuya; Goto, Shin-Ichi; Ono, Sawako; Hirai, Toshiyuki; Kudo, Hisaaki; Shigekawa, Mitsuru; Shinohara, Atsushi; Oura, Yasuji; Nakahara, Hiromichi; Sueki, Keisuke; Kikunaga, Hidetoshi; Kinoshita, Norikazu; Tsuruga, Naoya; Yokoyama, Akihiko; Sakama, Minoru; Enomoto, Shuich; Schädel, Matthias; Brüchle, Willy; Kratz, Jens V

    2004-04-28

    Fluoride complexation of element 104, rutherfordium (Rf), produced in the 248Cm(18O,5n)261Rf reaction has been studied by anion-exchange chromatography on an atom-at-a-time scale. The anion-exchange chromatographic behavior of Rf was investigated in 1.9-13.9 M hydrofluoric acid together with those of the group-4 elements Zr and Hf produced in the 18O-induced reactions on Ge and Gd targets, respectively. It was found that the adsorption behavior of Rf on anion-exchange resin is quite different from those of Zr and Hf, suggesting the influence of relativistic effects on the fluoride complexation of Rf.

  7. Necessity to review the Brazilian regulation about fluoride toothpastes.

    Science.gov (United States)

    Cury, Jaime Aparecido; Caldarelli, Pablo Guilherme; Tenuta, Livia Maria Andaló

    2015-01-01

    The aim of this study was to evaluate the adequacy of the Brazilian legislation about fluoride toothpaste. A search was conducted in LILACS, Medline and SciELO databases about the fluoride concentration found in Brazilians toothpastes, using descriptors on health. Publications since 1981 have shown that some Brazilian toothpastes are not able to maintain, during their expiration time, a minimum of 1,000 ppm F of soluble fluoride in the formulation. However, the Brazilian regulation (ANVISA, Resolution 79, August 28, 2000) only sets the maximum total fluoride (0.15%; 1,500 ppm F) that a toothpaste may contain but not the minimum concentration of soluble fluoride that it should contain to have anticaries potential, which according to systematic reviews should be 1,000 ppm F. Therefore, the Brazilian regulation on fluoride toothpastes needs to be revised to assure the efficacy of those products for caries control.

  8. Bone fluoride concentrations in beluga whales from Canada.

    Science.gov (United States)

    Mikaelian, I; Qualls, C W; De Guise, S; Whaley, M W; Martineau, D

    1999-04-01

    Beluga whales (Delphinapterus leucas) from the St. Lawrence Estuary have been reported to have dental and bone abnormalities. To determine whether these lesions could be caused by high exposure to fluorides, we measured bone fluoride levels in eight beluga whales stranded on the shores of the St. Lawrence Estuary (Quebec, Canada), and in nine beluga whales killed by Inuit hunters in the Hudson Bay (North Western Territories, Canada). In both groups, fluoride concentrations were higher than those found in terrestrial mammals intoxicated by fluorides. Unexpectedly, fluoride concentration was significantly higher in beluga whales from the Hudson Bay (mean +/- SD: 10.365 +/- 1.098 ppm) than in beluga whales from the St. Lawrence Estuary (4.539 +/- 875 ppm) and was positively correlated with age in the latter population. Differences in diet might explain the differences in fluoride concentrations found between these two populations.

  9. Adsorption of Fluoride Ion by Inorganic Cerium Based Adsorbent

    Institute of Scientific and Technical Information of China (English)

    Jiao Zhongzhi(焦中志); Chen Zhonglin; Yang Min; Zhang Yu; Li Guibai

    2004-01-01

    Excess of fluoride in drinking water is harmful to human health, the concentration of F- ions must be maintained in the range of 0.5 to 1.5 mg/L. An inorganic cerium based adsorbent (CTA) is developed on the basis of research of adsorption of fluoride on cerium oxide hydrate. Some adsorption of fluoride by CTA adsorbent experiments were carried out, and results showed that CTA adsorbent has a quick adsorption speed and a large adsorption capacity. Adsorption follows Freundlich isotherm, and low pH value helps fluoride removal. Some physical-chemical characteristics of CTA adsorbent were experimented, fluoride removal mechanism was explored, and results showed that hydroxyl group of CTA adsorbent played an important role in the fluoride removal.

  10. Fluoride contamination in rain water of Sigrauli region

    Energy Technology Data Exchange (ETDEWEB)

    Chaurasia, S.; Mishra, S.K. [Mahatma Gandhi Chitrakoot Gramodaya, Chitrakoot (India)

    2007-07-01

    In this paper fluoride was monitored in rain water during rainy season at seven locations of Sigrauli region in 2004. The sampling location covered the impact of industrial complex of the area, and its impact on surface water sources monitored for the fluoride, pH, and electrical conductivity. The higher concentration of fluoride in rain water was observed 2.03 mg/L at Dudhar and in ponds water highest value was 3.14 mg/L. This suggested that serious fluoride pollution is occurring in Singrauli region posing a threat to the health and livelihood of the people of the region. Fluoride transported by the air route from coal burning emissions of large thermal power plants concentrate in small geographical area, and industries. Fluoride pollution in Singrauli area deserve intensive scientific studies and urgent attention. 2 figs., 2 tabs.

  11. Viscosity estimation for slags containing calcium fluoride

    Institute of Scientific and Technical Information of China (English)

    Qifeng Shu; Jiayun Zhang

    2005-01-01

    Based on recently published experimental data, the Riboud model was modified for viscosity estimation of the slags containing calcium fluoride. The estimated values were in good agreement with measured data. Reasonable estimation can be achieved using the modified Riboud model for mould fluxes and ESR (eletro slag remelting) slags. Especially for ESR slags, the modified Riboud model can provide much more precise values than the original Riboud model.

  12. Fluoride glasses: properties, technology and applications

    OpenAIRE

    Poulain, M.

    2010-01-01

    Heavy Metal Fluoride Glasses (HMFG) make a group of specialty glasses that require a dry processing, purity control of starting materials and specific thermal procedures. Numerous glass compositions have been identified in different chemical systems: fluorozirconates, fluoroaluminates and fluoroindates. The most commonly used HMFG is the ZBLAN fluorozirconate glass that exhibits the largest stability against devitrification. By comparison to ZBLAN the IR cut-off wavelength is shorter in AlF3-...

  13. Effect of fluoride toothpastes on enamel demineralization

    Directory of Open Access Journals (Sweden)

    Gintner Zeno

    2006-06-01

    Full Text Available Abstract Background It was the aim of this study to investigate the effect of four different toothpastes with differing fluoride compounds on enamel remineralization. Methods A 3 × 3 mm window on the enamel surface of 90 human premolars was demineralized in a hydroxyethylcellulose solution at pH 4.8. The teeth were divided into 6 groups and the lower half of the window was covered with varnish serving as control. The teeth were immersed in a toothpaste slurry containing: placebo tooth paste (group 1; remineralization solution (group 2; Elmex Anticaries (group 3; Elmex Sensitive (group 4; Blend-a-med Complete (group 5 and Colgate GRF (group 6. Ten teeth of each group were used for the determination of the F- content in the superficial enamel layer and acid solubility of enamel expressed in soluble phosphorus. Of 6 teeth of each group serial sections were cut and investigated with polarization light microscopy (PLM and quantitative energy dispersive X-ray analysis (EDX. Results The PLM results showed an increased remineralization of the lesion body in the Elmex Anticaries, Elmex Sensitive and Colgate GRF group but not in the Blend-a-med group. A statistically significant higher Ca content was found in the Elmex Anticaries group. The fluoride content in the superficial enamel layer was significantly increased in both Elmex groups and the Blend-a-med group. Phosphorus solubility was significantly decreased in both Elmex groups and the Blend-a-med group. Conclusion It can be concluded that amine fluoride compounds in toothpastes result in a clearly marked remineralization of caries like enamel lesions followed by sodium fluoride and sodium monofluorophosphate formulations.

  14. How and when to prescribe sodium fluoride.

    Science.gov (United States)

    Shambaugh, G E

    1989-03-01

    Sodium fluoride has now been used for 24 years in an effort to slow down or arrest sensorineural hearing nerve deterioration in patients with stapedial otosclerosis or after stapedectomy, as well as in patients with pure cochlear otosclerosis. Extensive clinical experience in thousands of patients with this therapy has demonstrated its value in arresting previously progressive sensorineural hearing loss. For a long time there were those who objected to this therapy on the basis that it had not been adequately proven by double-blind, placebo-controlled studies. They have been answered by Bretlau's study in Denmark and Fisch's from Switzerland; both investigators confirmed on small groups the value of sodium fluoride by double-blind, placebo-controlled studies. Extensive research by Professor Petrovic of Strasbourg while at our tissue culture laboratory at Northwestern University demonstrated the action of sodium fluoride on bone. A nicely designed study with radioactive strontium by Linthicum, House, and Althaus demonstrated its value in promoting maturation of a spongiotic focus. Today there is no reason to hesitate in prescribing this useful, effective, and safe medication to promote maturation of otospongiotic lesions, and thus to slow down or to arrest progression in sensorineural hearing loss.

  15. Color stability of esthetic restorative material after topical fluoride application

    OpenAIRE

    2015-01-01

    AIM: Present study was conducted to compare the effect of topical fluoride agents on color change of three aesthetic restorative materials. MATERIAL AND METHODS: Restorative material used were Ketac Fill type II (GIC), Filtek Z350(Composite) and Beuttifull II (Giomer). Topical Fluorides used were Pascal (1.23% APF gel) and Fluoride Varnish (Bifluoride). 24 samples of each restorative material were prepared, which were divided into 8 each, among three groups. Treatment of Group A with APF gel,...

  16. Inhibition of dentin demineralization by fluoride in vitro.

    Science.gov (United States)

    ten Cate, J M; Damen, J J; Buijs, M J

    1998-01-01

    Compared with the knowledge accumulated on enamel-fluoride interactions, relatively little data is available regarding fluoride effects on dentin. This applies to both laboratory and clinical studies into the efficacy of fluoride schemes for the prevention of root surface caries. This study aimed to determine the effects of fluoride and pH on the demineralization of dentin, such as to provide information necessary to develop preventive programmes. Bovine dentin blocks were subjected to undersaturated calcium- and phosphate-containing solutions in the pH range 4.0-6.0 with fluoride added at concentrations between 0.5 and 10 ppm. Non-fluoride solutions served as controls. Mineral loss was assessed chemically and by transversal microradiography. Comparisons were made with similar studies on enamel demineralization. The results showed that demineralization of dentin depends on both pH and fluoride concentration in the demineralizing solution. Inhibition of demineralization that could be relevant from a clinical point of view was found at fluoride values 5-10 times the corresponding values for enamel. Also rapid depletion of fluoride from the solutions was observed, indicating the high uptake capacity of dentin for fluoride. Lesion depth depended on pH of the solution while the fluoride levels were associated with the surface layer, both in mineral content and depth. For dentin we propose a demineralization mechanism where acid penetrates rapidly into the tissue, presumably through the tubules, after which the released calcium and phosphate is partly trapped by the inward diffusing fluoride. This leads to the formation of a surface layer, which may even be hypermineralized compared to sound dentin.

  17. Studies on fluoride complexing of hexavalent actinides using a fluoride ion selective electrode

    Energy Technology Data Exchange (ETDEWEB)

    Sawant, R.M.; Chaudhuri, N.K.; Rizvi, G.H.; Patil, S.K.

    1985-08-01

    Complex formation between actinide(VI) and fluoride ions in aqueous solutions was investigated using a fluoride ion selective electrode (F-ISE). As fairly high acidity used to suppress hydrolysis of the actinide(VI) ions, significant liquid junction potentials (Esub(j)) existed in the system. An iterative procedure was developed for computing free hydrogen ion concentration (Hsup(+)) as it could not be measured directly, using data obtained with F-ISE. Esub(j) values were estimated from known (Hsup(+)) and the stability constants of fluoride complexes of actinide(VI) ions were calculated following King and Gallagher's method using a computer program. The stability constants were found to follow the order U(VI) > Np(VI) > Pu(VI). (author). 18 refs.; 3 figs.; 9 tables.

  18. Reviews of the environmental effects of pollutants. IX. Fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Drury, J.S.; Ensminger, J.T.; Hammons, A.S.; Holleman, J.W.; Lewis, E.B.; Preston, E.L.; Shriner, C.R.; Towill, L.E.

    1980-09-01

    This study is a comprehensive, multidisciplinary review of the health and environmental effects of fluoride on microorganisms, plants, wild and domestic animals, and humans. More than 1000 references are cited. Human intake of fluoride is chiefly through the diet; drinking water is normally the largest single source. Low concentrations of fluoride in water (approximately 1 ppM) benefit mammalian systems, making bone and tooth apatite less soluble, but long-term ingestion of water containing more than 8 ppM fluoride causes fluorosis in humans. Fluoride salts are lethal to humans when ingested in doses of about 3 g or more. At concentrations normally encountered by the general public, fluoride is not teratogenic, mutagenic, or carcinogenic to humans, but chronic fluoride toxicosis of both livestock and wildlife is an important problem in many areas of the United States. The principal manifestations of chronic fluoride toxicosis in livestock are dental fluorosis, osteofluorosis, lameness, and impaired performance. Among domestic animals, dairy cattle are the most sensitive to excessive fluoride exposure.

  19. Fluoride content in caffeinated, decaffeinated and herbal teas.

    Science.gov (United States)

    Chan, J T; Koh, S H

    1996-01-01

    The fluoride contents of infusions prepared from 44 different brands and types of teas were measured. Fluoride concentrations ranged from 0.34 to 3.71 ppm (mean = 1.50 ppm) in caffeinated tea infusions, 0.02-0.14 ppm (mean = 0.05 ppm) in herbal tea infusions, and 1.01-5.20 ppm (mean = 3.19) in decaffeinated tea infusions. This is the first report of the fluoride content of decaffeinated teas. The mean fluoride content of decaffeinated tea infusions is significantly (p decaffeination is the most likely explanation of the above observation.

  20. LiFePO_4/C via fluoride doping

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Non-stoichiometric compound fluoride-doped LiFePO4/C cathode materials were synthesized via solid-state reaction using MgF2 and AlF3 as dopant. The fluoride-doped LiFePO4/C samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical testing. The results show that the materials are well crystallized and fluoride doping cannot change the space structure of LiFePO4. Slight amounts of Fe2O3 with no fluoride impurity were ...

  1. [Allergy caused by sodium fluoride glycerin: a case report].

    Science.gov (United States)

    Ma, Jihong

    2012-04-01

    In recent years, though more and more ulcerations of oral mucosa caused by allergy to drug occurred clinically, allergy to sodium fluoride glycerin is extremely rare. A case of allergy to sodium fluoride glycerin occurred in Qianfoshan Campus Hospital of Shandong University. After treatment by sodium fluoride glycerin, there was mucosal edema, a large number of red miliary granules in buccal and palatal mucosa. After 3 hours, there were swallowing difficulties, but no breathing difficulties. Next day large ulcers of oral mucosa developed. The patient was cured 7 days after treatment. Fluoride-sensitive test result was positive.

  2. Effects of oral doses of fluoride on nestling European starlings

    Science.gov (United States)

    Fleming, W.J.; Grue, C.E.; Schuler, C.A.; Bunck, C.M.

    1987-01-01

    Nestling European starlings (Sturnus vulgaris), raised and fed by free-living adults, were given daily oral doses of either distilled water, 193 mg sodium as Na2CO3 per kg of body weight (sodium control group), or 6, 10, 13, 17,23, 30, 40, 80, 160 mg of the fluoride ion as NaF in distilled water per kg of body weight (mg/kg). Dosing began when nestlings were 24-48 hr old and continued for 16 days. The 24-hr LD50 of fluoride for day-old starlings was 50 mg/kg. The 16-day LD50 was 17 mg/kg. The sodium control group did not differ from the water control group with respect to any of the measured variables. Growth rates were significantly reduced in the 13 and 17 mg of fluoride/kg groups; weights of birds given higher dose levels were omitted from growth comparisons because of high, fluoride-induced mortality. Although pre-fledging weights for the 10, 13, and 17 mg of fluoride/kg groups averaged 3.6 to 8.6% less than controls at 17 days, this difference was not significant. Feather and bone growth of the fluoride and control groups were not different, except for keel length measured at 17 days of age which averaged less in the fluoride groups. Liver and spleen weights were not affected by fluoride treatments. No histological damage related to fluoride treatments was found in liver, spleen, or kidney. The logarithm of bone fluoride and magnesium concentration increased with the logarithm of increasing fluoride treatment levels and were significantly correlated with each other. Fluoride treatments had no effect on percent calcium or phosphorus in bone or plasma alkaline phosphatase activity. Oral doses of fluoride appear to be more toxic than equivalent dietary levels. Most birds probably acquire fluoride through their diet. Therefore, the results of the study may overestimate the potential effects of fluorides on songbirds living in fluoride-contaminated environments.

  3. Cariostatic effect of fluoride-containing restorative materials associated with fluoride gels on root dentin

    Directory of Open Access Journals (Sweden)

    Fernanda Tavares Borges

    2010-10-01

    Full Text Available Secondary caries is still the main cause of restoration replacement, especially on the root surface OBJECTIVE: This in vitro study evaluated the cariostatic effects of fluoride-containing restorative materials associated with fluoride gels, on root dentin. MATERIALS AND METHODS: A randomized complete block design was used to test the effects of the restorative systems, fluoride regimes and the interactions among them at different distances from restoration margins. Standardized cavities were prepared on 240 bovine root specimens and randomly assigned to 15 groups of treatments (n=16. Cavities were filled with the following restorative materials: Ketac-Fil (3M-ESPE; Vitremer (3M-ESPE; Dyract/Prime & Bond NT (Dentsply; Charisma/Gluma One Bond (Heraeus Kulzer and the control, Z250/Single Bond (3M-ESPE. The specimens were subjected to a pH-cycling model designed to simulate high-caries activity. During the cycles, 1.23% acidulated phosphate fluoride, 2.0% neutral sodium fluoride or deionized/distilled water (control was applied to the specimens for 4 min. The surface Knoop microhardness test was performed before (KHNi and after (KHNf the pH cycles at 100, 200 and 300 mm from the margins. Dentin microhardness loss was represented by the difference in initial and final values (KHNi - KHNf. Data were analyzed by Friedman's and Wilcoxon's tests, ANOVA and Tukey's test (α=5%. RESULTS: The interaction of restorative systems and topical treatments was not significant (p=0.102. Dentin microhardness loss was lowest closer to the restoration. Ketac-fil presented the highest cariostatic effect. Vitremer presented a moderate effect, while Dyract and Charisma did not differ from the control, Z250. The effects of neutral and acidulated fluoride gels were similar to each other and higher than the control. CONCLUSION: Conventional and resin-modified glass ionomer cements as well as neutral and acidulated fluoride gels inhibit the progression of artificial caries

  4. Exraction and separation of CERIUM(IV)/FLUORINE in fluoride-bearing cerium sulfate solution with fluoride coordination agent

    OpenAIRE

    Li, Y; J. G. He; X. X. Xue; Ru, H. Q.; X. W. Huang; Yang, H.

    2014-01-01

    In this paper the extraction and separation of cerium/fluorine in fluoride-bearing cerium sulfate solution with fluoride coordination agent has been studied. The UV-vis spectra suggest that Zr6+ and Al3+ can scrub the F- from [CeF2] 2+ complex. The separation and conductivity studies show that aluminum salt is the most suitable fluoride coordination agent, and an ion-exchange reaction is involved between Ce4+/ [CeF2] 2+ and hydrogen ion.

  5. Effectiveness of silver diamine fluoride and sodium fluoride varnish in arresting dentin caries in Chinese pre-school children

    OpenAIRE

    Chu, CH; Lo, ECM; Lin, HC

    2002-01-01

    Untreated dental caries in Chinese pre-school children is common. This prospective controlled clinical trial investigated the effectiveness of topical fluoride applications in arresting dentin caries. Three hundred seventy-five children, aged 3-5 years, with carious upper anterior teeth were divided into five groups. Children in the first and second groups received annual applications of silver diamine fluoride solution (44,800 ppm F). Sodium fluoride varnish (22,600 ppm F) was applied every ...

  6. Determination of Fluoride in Toothpaste Using an Ion-Selective Electrode

    Science.gov (United States)

    Light, Truman S.; Cappuccino, Carleton C.

    1975-01-01

    Outlines the theory of chemical potentiometry, describes the experimental procedure for free fluoride determination, and presents sample data of fluoride concentration for various brands of toothpaste. (GS)

  7. PREPARATION AND CHARACTERIZATION OF STRONTIUM FLUORIDE POWDERS ACTIVATED BY NEODYMIUM FLUORIDE

    Directory of Open Access Journals (Sweden)

    S. V. Kuznetsov

    2015-07-01

    Full Text Available Subject of Study. The paper deals with preparation processes of ultradisperse, homogeneous powder Sr1-хNdхF2+х (х= 0.003-0.2, with use of ammonium fluoride as the fluorinating agent taken over 114-120 % from stoichiometry. Method. Nitrate of strontium, neodymium nitrate hexahydrate, with the content equal to 99. 99 % of the basic substance and ammonium fluoride were used as the source of substances. Activated powders of strontium fluoride were obtained by the method of deposition from aqueous solutions by washing the precipitate with a solution of ammonium fluoride, taken over 114 - 120% from stoichiometry. The washed precipitate was centrifuged for 5-7 min, dried in the air at 30-350 C. Heat treatment of the dried precipitate was carried out in two stages: the first stage at the temperature of 200- 2500 C for 0.5-1 hour, the second one at 550- 6000 C for 2-3 hours. X-ray analysis of the synthesized samples was carried out on a Bruker D8 Advance diffractometer, radiation Cu K. The size and shape measuring of the particles of activated strontium fluoride was carried out by means of electron microscope Carl Zeiss NVision 40. The content of neodymium in activated powders of strontium fluoride was determined by the method of spectral emission analysis on the device LEA - S500. Chemical analysis for determination of ammonium ion (NH4+ content in the obtained samples was performed by the method of Kjeldahl. Calculations of lattice parameters, size of coherent scattering regions and the values of micro-deformations were carried out by TOPAS program. Main Results. Preparation processes of ultradisperse, homogeneous powder Sr1-хNdхF2+х (х= 0.003-0.2, with use of ammonium fluoride as the fluorinating agent taken over 114-120 % from stoichiometry, provides obtaining the firm solution Sr1-x-yNdx(NH4yF2+x-y of the cubic fluorite structure. It has been found out that the morphology and size of the resulting product depend on the quantity of

  8. Scientific Opinion on Dietary Reference Values for fluoride

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA

    2013-08-01

    Full Text Available Following a request from the European Commission, the Panel on Dietetic Products, Nutrition and Allergies (NDA derived Dietary Reference Values (DRVs for fluoride, which are provided as Adequate Intake (AI from all sources, including non-dietary sources. Fluoride is not an essential nutrient. Therefore, no Average Requirement for the performance of essential physiological functions can be defined. Nevertheless, the Panel considered that the setting of an AI is appropriate because of the beneficial effects of dietary fluoride on prevention of dental caries. The AI is based on epidemiological studies (performed before the 1970s showing an inverse relationship between the fluoride concentration of water and caries prevalence. As the basis for defining the AI, estimates of mean fluoride intakes of children via diet and drinking water with fluoride concentrations at which the caries preventive effect approached its maximum whilst the risk of dental fluorosis approached its minimum were chosen. Except for one confirmatory longitudinal study in US children, more recent studies were not taken into account as they did not provide information on total dietary fluoride intake, were potentially confounded by the use of fluoride-containing dental hygiene products, and did not permit a conclusion to be drawn on a dose-response relationship between fluoride intake and caries risk. The AI of fluoride from all sources (including non-dietary sources is 0.05 mg/kg body weight per day for both children and adults, including pregnant and lactating women. For pregnant and lactating women, the AI is based on the body weight before pregnancy and lactation. Reliable and representative data on the total fluoride intake of the European population are not available.

  9. A simple and colorimetric fluoride receptor and its fluoride-responsive organogel.

    Science.gov (United States)

    Yu, Xudong; Li, Yajuan; Yin, Yaobing; Yu, Decai

    2012-08-01

    In this paper, a new p-nitrophenylhydrozine-based anion receptor 1 containing cholesterol group had been designed and synthesized. It could selectively recognize fluoride among different anions tested with color changes from pale yellow to red for visual detection. Simultaneously, it could gel in cyclohexane, and the gel was also fluoride-responsive. When treated with TBAF (tetra-n-butylammonium fluoride), the gel could undergo gel-sol transition accompanied by color, morphology and surface changes. The binding mechanism had been investigated by UV-vis and (1)HNMR (proton nuclear magnetic resonance spectra) titrations. From SEM (scanning electron microscope), SAXS (small-angle X-ray scattering), IR (Infrared Spectroscopy) and CA (contact angle) experiments, it was indicated that the addition of F(-) could destroy the molecule assembly of host 1 in the gel state, thus resulting in the gel-to-sol transition due to the binding site competition effect. To the best of our knowledge, this was the simplest fluoride-responsive organogel with high selectivity.

  10. Effects of alternating periods of high- and low- fluoride ingestion on dairy cattle

    Energy Technology Data Exchange (ETDEWEB)

    Suttie, J.W.; Carlson, J.R.; Faltin, E.C.

    1972-01-01

    Two- and five-month old Holstein heifers were exposed to different intake patterns of dietary fluoride for 6 years. None of the fluoride treatments affected growth rate or reproduction. There was no consistent effect on milk production. Plasma fluoride concentrations closely followed current fluoride intake. Urinary fluoride concentrations varied with intake but remained elevated during low intake. Skeletal fluoride retention was directly related to total fluoride intake and not to pattern of intake. The degree of dental fluorosis was related to the amount of fluoride fed and to the plasma fluoride concentration at the time each incisor was developing. The most severe effects of fluoride ingestion were in high and low intake. These animals had severly worn molar teeth, extensive osteofluorosis, and they experienced periods of extreme lameness. Short periods of high fluoride intake balanced by periods of lower intake were more damaging to cattle than constant exposure to the same average yearly intake.

  11. Obstacles to extending fluoridation in the United States.

    Science.gov (United States)

    Neenan, M E

    1996-09-01

    The purpose of this paper is two-fold: (1) to describe the current extent of water fluoridation in the United States; (2) to address the major obstacles to attaining 75 per cent fluoridation by the year 2000. While 62.1 per cent of the US population has access to fluoridated public water systems, more than 32 million people need to be added to the fluoridation census, primarily from the cities. The legal framework for implementing fluoridation is considered at the state level; a review of fluoridation actions at the local level is presented. The impact of forces affecting the extension of fluoridation in the United States is described: (1) demographic trends--urbanisation, race, ethnicity, language, immigration, age, education levels, housing, income and poverty levels; (2) external environmental forces/political climate; (3) media influence on public opinion and public policy; (4) voter apathy/lack of awareness of the benefits of fluoridation; (5) perceptions of risks vs. benefits; (6) lack of political campaign skills; and (7) legal issues.

  12. A Process for Making Bulk Heavy Metal Fluoride Glasses.

    Science.gov (United States)

    This invention relates to the preparation of glasses, and, in particular, relates to the preparation of heavy metal fluoride glasses with...reproducible high optical qualities. Considerable effort has been expended to develop heavy metal fluoride glasses ( HMFG ) as a viable family of infrared

  13. Fluoride inhibits the response of bone cells to mechanical loading

    NARCIS (Netherlands)

    Willems, H.M.E.; van den Heuvel, E.G.H.M.; Castelein, S.; Keverling Buisman, J.; Bronckers, A.L.J.J.; Bakker, A.D.; Klein-Nulend, J.

    2011-01-01

    The response of bone cells to mechanical loading is mediated by the cytoskeleton. Since the bone anabolic agent fluoride disrupts the cytoskeleton, we investigated whether fluoride affects the response of bone cells to mechanical loading, and whether this is cytoskeleton mediated. The mechano-respon

  14. Computational investigation of the role of fluoride in Tamao oxidations

    DEFF Research Database (Denmark)

    Mader, Mary M.; Norrby, Per-Ola

    2002-01-01

    The Tamao oxidation of alkoxysilanes was investigated computationally to determine the role of fluoride. a key additive. in this reaction. A sequence of fluoride equilibria as well as possible transition states. mediated by basic and neutral peroxide, respectively, were examined, and a potential...

  15. Mechanisms of action of fluoride for caries control

    NARCIS (Netherlands)

    Buzalaf, M.A.R.; Pessan, J.P.; Honório, H.M.; ten Cate, J.M.; Buzalaf, M.A.R.

    2011-01-01

    Fluoride was introduced into dentistry over 70 years ago, and it is now recognized as the main factor responsible for the dramatic decline in caries prevalence that has been observed worldwide. However, excessive fluoride intake during the period of tooth development can cause dental fluorosis. In o

  16. KINETICS OF SORPTION OF FLUORIDE ON CALCINED MAGNESITE IN BATCH

    DEFF Research Database (Denmark)

    Singano, J. J.; Mashauri, D. A.; Mtalo, F. W.;

    1997-01-01

    A series of sorption of fluoride on calcined magnesite are obtained from thermostatic pH-chemostat and jar test experiments. The fluoride removal is observed not to start instantly, as normal, but after a lag time of up to ½ an hour of contact time. A model for sorption kinetics is developed, bas...

  17. Poisoning by coal smoke containing arsenic and fluoride

    Energy Technology Data Exchange (ETDEWEB)

    An, D.; He, Y.G.; Hu, Q.X. [Guizhou Sanitary and Epidemiological Station, Guiyang (China)

    1997-02-01

    An investigation was made into a disease involving skin pigmentation, keratosis of the hands and feet, dental discoloration, and generalized bone and joint pain, stiffness and rigidity, in the village of Bazhi, Zhijin County, Ghizhou Province, People`s Republic of China. Measurements were made of the arsenic and fluoride levels of coal, water, air, food, urine and hair in Bazhi and a control village, Xinzhai, in which coal with a low arsenic content was used. Up to 188 people, including children, in Bazhi and 752 in Xinzhai, were examined for the presence of chronic arsenium, skeletal fluorosis, dental fluorosis and electrocardiogram abnormalities. The coal in Bazhi was found to contain high levels of arsenic and fluoride resulting, after burning in homes without an adequate chimney systems, in pollution of air and food with arsenic and fluoride. The coal in Xinzhai did not cause arsenic pollution but did produce a higher level of fluoride pollution. It was concluded that the endemic disease in Bazhi was caused by pollution by coal smoke containing arsenic and fluoride. It is suggested that arsenic may act synergistically with fluoride so that a lower level of fluoride may produce fluoride toxicity with dental and skeletal fluorosis.

  18. Anti Streptococcus mutans non fluoride and fluoride containing sealants after adding nano-silver particles

    Directory of Open Access Journals (Sweden)

    Maryam Ghasempour

    2014-04-01

    Full Text Available   Background and Aims: Since recurrent caries are one of the major causes of failure in resin restorations, the production of antibacterial resin composites was always under investigation. The aim of this study was to evaluate the efficacy of fissure sealants containing nanosilver particles against the Streptococcus mutans.   Materials and Methods: In this experimental study, the antibacterial properties of two sealants (with fluoride (Clinpro 3M and without fluoride (Concise 3M was investigated with 0, 0.01, 0.02, 0.03, 0.04, 0.05% w/w after adding nano-silver using direct contact test. Sealants formed on the walls of 500ml micro tube and after curing, they left in contact with bacterial suspension. In periods of 3, 24, 48h, a 10 µl volume of liquid medium was placed in blood agar culture and after 24 h incubation at 37ºC, the number of S.mutans colony was counted by colony counter. Data were analyzed using ANOVA andT-test.   Results: Results reported sealants with fluoride comparing to non fluoride ones had significant effect on inhibition of S.mutans growth (P<0.001. The direct contact test demonstrated that by increasing the amount of nano particles, the bacterial growth was significantly diminished (P<0.001.   Conclusion: While sealants with fluoride demonstrated antibacterial effect, sealants with incorporation of higher weight percentage of nanosilver particles, had stronger and more significant antibacterial effect in direct contact test.

  19. Fluoride microresonators for mid-IR applications

    CERN Document Server

    Grudinin, Ivan S; Yu, Nan

    2016-01-01

    We study crystalline fluoride microresonators for mid-infrared applications. Whispering gallery mode resonators were fabricated with BaF$_2$, CaF$_2$ and MgF$_2$ crystals. The quality factors were measured at wavelengths of 1.56 {\\mu}m and 4.58 {\\mu}m. The impacts of fabrication technique, impurities, multiphonon absorption and surface water are investigated. It is found that MgF2 resonators have room temperature Q factor of $8.3\\times 10^6$ at wavelength of 4.58 {\\mu}m, limited by multiphonon absorption.

  20. Hydrogen fluoride overtone technology: Status review

    Science.gov (United States)

    Duncan, William A.; Patterson, Stanley P.; Graves, Bruce R.; Holloman, Miles E.; Sollee, Jeffrey L.

    The hydrogen fluoride (HF) overtone chemical laser concept is being developed as a shorter wavelength alternative to the well known HF fundamental chemical laser to achieve higher brightness space-based laser platforms. This paper provides a brief review of the overtone experimental data base and then concentrates on the design of versatile gain generator hardware for optimizing the Hypersonic Low-Temperature (HYLTE) nozzle concept for HF overtone laser performance. The paper also describes a recent high power demonstration of overtone lasing on a scalable gain generator device that is directly traceable to a space-based laser weapon, utilizing uncooled resonator optics.

  1. The status of community water fluoridation in the United States.

    Science.gov (United States)

    Easley, M W

    1990-01-01

    Community water fluoridation has served the American public extremely well as the cornerstone of dental caries prevention activities for 45 years. The dental and general health benefits associated with the ingestion of water-borne fluorides have been well known by researchers for an even longer period. Continued research has repeatedly confirmed the safety, effectiveness, and efficiency of community water fluoridation in preventing dental caries for Americans regardless of age, race, ethnicity, religion, educational status, or socioeconomic level. Despite the obvious benefits associated with this proven public health measure, slow progress has been made toward achieving the 1990 national fluoridation objectives as listed in "Promoting Health/Preventing Disease: Objectives for the Nation." This paper documents the lagging pace of community fluoridation by reviewing and analyzing data reported in "Fluoridation Census, 1985," a document published in late 1988 by the Public Health Service's Centers for Disease Control. Failure to attain the 1990 objectives is attributable to a combination of circumstances, including their low priority within many local, State, and Federal health agencies, inadequate funding at all levels of government, lack of a coordinated and focused national fluoridation effort, failure of most States to require fluoridation, lack of Federal legislation mandating fluoridation, general apathy of most health professional organizations toward fluoridation, misconceptions by the public about effectiveness and safety and, finally, unrelenting opposition by a highly vocal minority of the lay public. In addition, fluoridation successes have not been consistent among States, with wide variation in accomplishments documented in the reported data.While fluoridation still is one of the most cost effective public health measures available to local,State, and Federal public health agencies, it remains significantly underused nearly a half century after its

  2. The effective use of fluorides in public health

    DEFF Research Database (Denmark)

    Jones, Sheila; Burt, Brian A; Petersen, Poul Erik

    2005-01-01

    Dental caries remain a public health problem for many developing countries and for underprivileged populations in developed countries. This paper outlines the historical development of public health approaches to the use of fluoride and comments on their effectiveness. Early research and developm......Dental caries remain a public health problem for many developing countries and for underprivileged populations in developed countries. This paper outlines the historical development of public health approaches to the use of fluoride and comments on their effectiveness. Early research...... and their families, and the issue of cost. We recommend that a community should use no more than one systemic fluoride (i.e. water or salt or milk fluoridation) combined with the use of fluoride toothpastes, and that the prevalence of dental fluorosis should be monitored in order to detect increases in or higher...

  3. Fluoride use in Controlling Dental Caries and Fluorosis

    Directory of Open Access Journals (Sweden)

    Gaurav Solanki

    2012-07-01

    Full Text Available Policy were introduced to control fluoride exposure and to reduce the prevalence of fluorosis. The study aimed of describing the prevalence, severity and risk factors for fluorosis, and to describe the trend of fluorosis among Indian children. The study also aimed of exploring the effect of the change in fluoride exposure on dental fluorosis and caries. Establishing an appropriate use of fluoride toothpaste could be successful in reducing fluorosis without a significant increase in caries experience. The use of fluorides for oral health has always involved a balance between the protective benefit against dental caries and the risk of developing fluorosis. The link between fluoride and dental health was established to determining the causes of dental fluorosis or enamel mottling. Fluorosis in Indian children was highly prevalent in the early 1990s.

  4. Assessment of groundwater quality with respect to fluoride.

    Science.gov (United States)

    Salve, P R; Maurya, A; Kumbhare, P S; Ramteke, D S; Wate, S R

    2008-09-01

    The study was conducted in the summer season (April-May 2007). The fluoride concentration along with physico-chemical parameters in ground water samples was determined in various villages of Kadi tehsil at Mehsana district of Gujarat state (India), since in most of the villages it is the only source of drinking water. The fluoride concentrations in these villages varied from 0.94 to 2.81 mg/L (1.37+/-0.56) with highest fluoride level at Visalpur (2.08 mg/L) and lowest at Adaraj (0.91 mg/L). There was found a positive correlation of pH with fluoride and a negative relationship of fluoride with bicarbonate which is generally observed in deep ground water.

  5. Fluoride caused thyroid endocrine disruption in male zebrafish (Danio rerio).

    Science.gov (United States)

    Jianjie, Chen; Wenjuan, Xue; Jinling, Cao; Jie, Song; Ruhui, Jia; Meiyan, Li

    2016-02-01

    Excessive fluoride in natural water ecosystem has the potential to detrimentally affect thyroid endocrine system, but little is known of such effects or underlying mechanisms in fish. In the present study, we evaluated the effects of fluoride on growth performance, thyroid histopathology, thyroid hormone levels, and gene expressions in the HPT axis in male zebrafish (Danio rerio) exposed to different determined concentrations of 0.1, 0.9, 2.0 and 4.1 M of fluoride to investigate the effects of fluoride on thyroid endocrine system and the potential toxic mechanisms caused by fluoride. The results indicated that the growth of the male zebrafish used in the experiments was significantly inhibited, the thyroid microtrastructure was changed, and the levels of T3 and T4 were disturbed in fluoride-exposed male fish. In addition, the expressional profiles of genes in HPT axis displayed alteration. The expressions of all studied genes were significantly increased in all fluoride-exposed male fish after exposure for 45 days. The transcriptional levels of corticotrophin-releasing hormone (CRH), thyroid-stimulating hormone (TSH), thyroglobulin (TG), sodium iodide symporter (NIS), iodothyronine I (DIO1), and thyroid hormone receptor alpha (TRα) were also elevated in all fluoride-exposed male fish after 90 days of exposure, while the inconsistent expressions were found in the mRNA of iodothyronineⅡ (DIO2), UDP glucuronosyltransferase 1 family a, b (UGT1ab), transthyretin (TTR), and thyroid hormone receptor beta (TRβ). These results demonstrated that fluoride could notably inhibit the growth of zebrafish, and significantly affect thyroid endocrine system by changing the microtrastructure of thyroid, altering thyroid hormone levels and endocrine-related gene expressions in male zebrafish. All above indicated that fluoride could pose a great threat to thyroid endocrine system, thus detrimentally affected the normal function of thyroid of male zebrafish.

  6. Milk fluoridation for the prevention of dental caries

    Directory of Open Access Journals (Sweden)

    Jolán Bánóczy

    2013-11-01

    Full Text Available The aim of this review is to give an overview of 55 years experience of milk fluoridation and draw conclusions about the applicability of the method. Fluoridated milk was first investigated in the early 1950s, almost simultaneously in Switzerland, the USA and Japan. Stimulated by the favourable results obtained from these early studies, the establishment of The Borrow Dental Milk Foundation (subsequently The Borrow Foundation in England gave an excellent opportunity for further research, both clinical and non-clinical, and a productive collaboration with the World Health Organization which began in the early 1980s. Numerous peer-reviewed publications in international journals showed clearly the bioavailability of fluoride in various types of milk. Clinical trials were initiated in the 1980s – some of these can be classed as randomised controlled trials, while most of the clinical studies were community preventive programmes. Conclusion. These evaluations showed clearly that the optimal daily intake of fluoride in milk is effective in preventing dental caries. The amount of fluoride added to milk depends on background fluoride exposure and age of the children: commonly in the range 0.5 to 1.0 mg per day. An advantage of the method is that a precise amount of fluoride can be delivered under controlled conditions. The cost of milk fluoridation programmes is low, about € 2 to 3 per child per year. Fluoridation of milk can be recommended as a caries preventive measure where the fluoride concentration in drinking water is suboptimal, caries experience in children is significant, and there is an existing school milk programme.

  7. 76 FR 19001 - Sulfuryl Fluoride; Addendum to Proposed Order Granting Objections to Tolerances and Denying...

    Science.gov (United States)

    2011-04-06

    ... treatments and for structural fumigation for which there is significant sulfuryl fluoride use and no readily... fluoride/fluoride tolerances for rice commodities associated with direct fumigation of rice that were... phosphine) rather than sulfuryl fluoride. (See Office of Prevention, Pesticides, and Toxic Substances,...

  8. FLUORIDE SORPTION USING MORRINGA INDICA-BASED ACTIVATED CARBON

    Directory of Open Access Journals (Sweden)

    G. Karthikeyan, S. Siva Ilango

    2007-01-01

    Full Text Available Batch adsorption experiments using activated carbon prepared from Morringa Indica bark were conducted to remove fluoride from aqueous solution. A minimum contact time of 25 min was required for optimum fluoride removal. The influence of adsorbent, dose, pH, co-ions (cations and anions on fluoride removal by the activated carbon has been experimentally verified. The adsorption of fluoride was studied at 30 C, 40 C and 50 C. The kinetics of adsorption and adsorption isotherms at different temperatures were studied. The fluoride adsorption obeyed both Langmuir and Freundlich isotherms and followed a pseudo first order kinetic model. The thermodynamic studies revealed that the fluoride adsorption by Morringa Indica is an endothermic process indicating an increase in sorption rate at higher temperatures. The negative values of G indicate the spontaneity of adsorption. SEM and XRD studies confirmed the surface morphological characteristics of the adsorbent and the deposition of fluoride on the surface of the material.

  9. High Fluoride Dentifrices for Elderly and Vulnerable Adults

    DEFF Research Database (Denmark)

    Ekstrand, Kim Rud

    2016-01-01

    The primary aim of this work is to present the available evidence that toothpastes containing >1,500 ppm fluoride (2,500-2,800 and 5,000 ppm F) provide an additional caries preventive effect on root caries lesions in elderly patients compared to traditional dentifrices (1,000-1,450 ppm F). The se......The primary aim of this work is to present the available evidence that toothpastes containing >1,500 ppm fluoride (2,500-2,800 and 5,000 ppm F) provide an additional caries preventive effect on root caries lesions in elderly patients compared to traditional dentifrices (1,000-1,450 ppm F......). The secondary aim of this paper is to discuss why high fluoride dentifrices in general should perform better than traditional F-containing toothpaste. When examining the few studies that have considered the preventive benefits of high fluoride products on root caries the relative risk appears to be around 0.......5, and the risk can thus be halved by exchanging traditional F-containing toothpaste for toothpaste containing 5,000 ppm F. There is reasonable evidence that high fluoride dentifrices significantly increase the fluoride concentration in saliva during the day and the fluoride concentration in plaque compared...

  10. Synthesis of nanocrystalline mixed metal fluorides in nonaqueous medium

    Indian Academy of Sciences (India)

    Neetu Tyagi; Epsita Ghanti; Nikesh Gupta; N P Lalla; Rajamani Nagarajan

    2009-12-01

    Synthesis of mixed metal fluorides of the general formula, KMF3 (M = Mg, Mn, Co, Ni, Cu and Zn), possessing perovskite structure was investigated in non-aqueous medium. The fluorides were characterized by powder X-ray diffraction, FT–IR spectroscopy, thermal analysis, SEM and TEM. Monophasic cubic phases were obtained for the central metal ions such as Mg, Mn, Co, Ni, and Zn and a tetragonally distorted phase was observed for Cu. The usage of non-aqueous medium is advantageous for the bulk synthesis of these fluorides, since it eliminated the generation and handling of the hazardous HF that has usually been encountered during aqueous preparations. The average crystallite size of the fluorides obtained by this approach was estimated to be in the range of 9–30 nm. SEM micrographs of KZnF3 showed cubic morphology of perovskite phases. TEM studies on KCuF3 confirmed the presence of tetragonal distortion. The fluoride content was determined by titrimetry and found to be nearly stoichiometric. Some of these fluorides were found to be thermally stable up to 225°C in air. These fluorides were employed as fluorinating agents in organic fluorination reactions, thereby suggesting their possible utilization for selective fluorination of aliphatic and aromatic hydrofluorocarbons (HFCs) that are industrially relevant.

  11. Monitoring of fluoride in water samples using a smartphone

    Energy Technology Data Exchange (ETDEWEB)

    Levin, Saurabh [Akvo Foundation (Netherlands); Krishnan, Sunderrajan [INREM Foundation (India); Rajkumar, Samuel; Halery, Nischal; Balkunde, Pradeep [Akvo Foundation (Netherlands)

    2016-05-01

    In several parts of India, groundwater is the only reliable, year round source for drinking water. Prevention of fluorosis, a chronic disease resulting from excess intake of fluoride, requires the screening of all groundwater sources for fluoride in endemic areas. In this paper, the authors present a field deployable colorimetric analyzer based on an inexpensive smartphone embedded with digital camera for taking photograph of the colored solution as well as an easy-fit, and compact sample chamber (Akvo Caddisfly). Phones marketed by different smartphone makers were used. Commercially available zirconium xylenol orange reagent was used for determining fluoride concentration. A software program was developed to use with the phone for recording and analyzing the RGB color of the picture. Linear range for fluoride estimation was 0–2 mg l{sup −1}. Around 200 samples, which consisted of laboratory prepared as well as field samples collected from different locations in Karnataka, India, were tested with Akvo Caddisfly. The results showed a significant positive correlation between Ion Selective Electrode (ISE) method and Akvo Caddisfly (Phones A, B and C), with correlation coefficient ranging between 0.9952 and 1.000. In addition, there was no significant difference in the mean fluoride content values between ISE and Phone B and C except for Phone A. Thus the smartphone method is economical and suited for groundwater fluoride analysis in the field. - Highlights: • Fluoride is an inorganic pollutant in ground water, affecting human health. • A colorimetric method for measurement of fluoride in drinking water with smartphone • Measurement is by mixing water with zirconyl xylenol orange complex reagent. • Results are comparable with laboratory-based ion selective fluoride electrode method.

  12. Serum fluoride and sialic acid levels in osteosarcoma.

    Science.gov (United States)

    Sandhu, R; Lal, H; Kundu, Z S; Kharb, S

    2011-12-01

    Osteosarcoma is a rare malignant bone tumor most commonly occurring in children and young adults presenting with painful swelling. Various etiological factors for osteosarcoma are ionizing radiation, family history of bone disorders and cancer, chemicals (fluoride, beryllium, and vinyl chloride), and viruses. Status of fluoride levels in serum of osteosarcoma is still not clear. Recent reports have indicated that there is a link between fluoride exposure and osteosarcoma. Glycoproteins and glycosaminoglycans are an integral part of bone and prolonged exposure to fluoride for long duration has been shown to cause degradation of collagen and ground substance in bones. The present study was planned to analyze serum fluoride, sialic acid, calcium, phosphorus, and alkaline phosphatase levels in 25 patients of osteosarcoma and age- and sex-matched subjects with bone-forming tumours other than osteosarcoma and musculo-skeletal pain (controls, 25 each). Fluoride levels were analyzed by ISE and sialic acid was analyzed by Warren's method. Mean serum fluoride concentration was found to be significantly higher in patients with osteosarcoma as compared to the other two groups. The mean value of flouride in patients with other bone-forming tumors was approximately 50% of the group of osteosarcoma; however, it was significantly higher when compared with patients of group I. Serum sialic acid concentration was found to be significantly raised in patients with osteosarcoma as well as in the group with other bone-forming tumors as compared to the group of controls. There was, however, no significant difference in the group of patients of osteosarcoma when compared with group of patients with other bone-forming tumors. These results showing higher level of fluoride with osteosarcoma compared to others suggesting a role of fluoride in the disease.

  13. Amelioration of Fluoride Toxicity with the Use of Indigenous Inputs

    Directory of Open Access Journals (Sweden)

    Maitra A.

    2013-08-01

    Full Text Available An assessment was undertaken to study the efficacy of bacterial consortia isolated from different sources viz. rhizosphere of rice plant, oil spill sites of a petrol pump and from the sludge of a pharmaceutical waste water drain against the impact of fluoride. The experiments were conducted with two crops. In this mung bean experiment Vigna radiata was selected as a test crop. The seeds were sown in the field with bacterial consortia, compost and reduced dose (25% less nitrogen than recommended dose of chemical fertilizer. After 30days of seed sowing (DAS, plants were collected from the field and dipped into the sodium fluoride solution with different concentrations for 48 hours. Thereafter, the impact of fluoride on chlorophyll, sugar, proline and relative water content (% were evaluated. Scanning electron microscopy (SEM of the stem section was performed. SEM studies revealed that anatomical structure deformed with 1.5 mg/l sodium fluoride solution. It was observed that such treatment combination during the sowing of crops leads to combat the impact of lower doses of sodium fluoride (0.2 mg/l. Another experiment was also conducted within plastic pots with and without bacterial consortia isolated from rhizosphere of rice plant and oil spilled soil of petrol pump with the same field soil. Each pot was filled with 5 kg of soil + 2lt of water (on the basis of soil saturation. Oryza sativa seedlings were transplanted with different strength of sodium fluoride solution (25 mgNaF/kg, 50 mgNaF/kg, 100 mgNaF/kg and 500mgNaF/kg within the above pots. In second experiment, rice plants dried in all pots after 500 mgNaF/kg concentration of sodium fluoride. In this pot experiment bacterial strain are capable of reducing fluoride content in soil as noted by measuring fluoride in the pot soil after the experiment.

  14. Pharmacokinetics of Fluoride in Toddlers After Application of 5% Sodium Fluoride Dental Varnish

    OpenAIRE

    Milgrom, Peter; Taves, Donald M.; Kim, Amy S.; Watson, Gene E.; Horst, Jeremy A

    2014-01-01

    The prevalence of dental caries (tooth decay) among preschool children is increasing, driven partially by an earlier age of onset of carious lesions. The American Academy of Pediatrics recommends application of 5% sodium fluoride varnish at intervals increasing with caries risk status, as soon as teeth are present. However, the varnishes are marketed for treatment of tooth sensitivity and are regulated as medical devices rather than approved by the US Food and Drug Administration for preventi...

  15. Fluoride and lead adsorption on carbon nanotubes

    Institute of Scientific and Technical Information of China (English)

    WANG Shuguang; LI Yanhui

    2004-01-01

    The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on. However, the study on the potential application of CNT, environmental protection field in particular, was hardly begun.Long[8] et al. reported that CNT had a significantly higher dioxin removal efficiency than that of activated carbon. The Langmuir adsorption constant is 2.7 × 1052, 1.3 × 1018 respectively. The results indicated that CNT is potential candidate for the removal of micro-organic pollutants. However, the reports on the CNT used as fluoride and heavy metal adsorbent are seldom.In this paper, A novel material, alumina supported on carbon nanotubes (Al2O3/CNT), was prepared from carbon nanotubes and Al(NO3)3. X-ray diffraction (XRD) spectra demonstrate that alumina is amorphous, and scanning electron microscope (SEM) images show that CNT and alumina are homogeneously mixed. Furthermore, the fluoride adsorption behavior on the surface of Al2O3/CNT has been investigated and compared with other adsorbents. The results indicate that Al2O3/CNT has a high adsorption capacity, with a saturation adsorption capacity of 39.4 mg/g. It is also found that the adsorption capacity of Al2O3/CNT is 3.0~4.5 times that of γ-Al2O3while almost equal to that of IRA-410 polymeric resin at 25 ℃. The adsorption isotherms of fluoride on Al2O3/CNT is fit the Freundlich equation well, optimal pH ranging from 5.0 to 9.0.Also in this paper, a novel material, modified carbon nanotubes (CNT), was prepared from carbon nanotubes and HNO3 under boiling condition. Infrared spectroscopy (IR

  16. Fluoride gases damages on agricultural and ornamental plants

    Energy Technology Data Exchange (ETDEWEB)

    Grasso, V.; Padalino, O.

    1968-01-01

    Reports are presented concerning fluoride gases from a brick furnace, damaging agricultural and ornamental plants: Prunus armeniaca L. var. Reale d'Imola, Vitis vinifera L. var. Cardinal, Gladiolus spp., Pinus pinea L., Iris germanica L., that are particularly sensitive to these gases. There are descriptions of the morphological alterations and the authors have proven the presence of fluoride in the chemically analyzed samples. There is a list of plants found near the brick furnace that have been classified as (I) highly sensitive; (II) moderately sensitive; (III) very little sensitivity; (IV) immune to fluoride gases. 10 references, 9 figures.

  17. Fluoride Varnish Efficacy in Preventing Early Childhood Caries

    OpenAIRE

    Weintraub, J.A.; Ramos-Gomez, F; Jue, B.; Shain, S.; Hoover, C I; Featherstone, J.D.B.; Gansky, S.A.

    2006-01-01

    To determine the efficacy of fluoride varnish (5% NaF, Duraphat®, Colgate) added to caregiver counseling to prevent early childhood caries, we conducted a two-year randomized, dental-examiner-masked clinical trial. Initially, 376 caries-free children, from low-income Chinese or Hispanic San Francisco families, were enrolled (mean age ± standard deviation, 1.8 ± 0.6 yrs). All families received counseling, and children were randomized to the following groups: no fluoride varnish, fluoride varni...

  18. Nitrogen Trifluoride-Based Fluoride- Volatility Separations Process: Initial Studies

    Energy Technology Data Exchange (ETDEWEB)

    McNamara, Bruce K.; Scheele, Randall D.; Casella, Andrew M.; Kozelisky, Anne E.

    2011-09-28

    This document describes the results of our investigations on the potential use of nitrogen trifluoride as the fluorinating and oxidizing agent in fluoride volatility-based used nuclear fuel reprocessing. The conceptual process uses differences in reaction temperatures between nitrogen trifluoride and fuel constituents that produce volatile fluorides to achieve separations and recover valuable constituents. We provide results from our thermodynamic evaluations, thermo-analytical experiments, kinetic models, and provide a preliminary process flowsheet. The evaluations found that nitrogen trifluoride can effectively produce volatile fluorides at different temperatures dependent on the fuel constituent.

  19. Fluoridated toothpaste: usage and ingestion of fluoride by 4- to 6-yr-old children in England.

    Science.gov (United States)

    Zohoori, Fatemeh V; Duckworth, Ralph M; Omid, Narges; O'Hare, William T; Maguire, Anne

    2012-10-01

    Fluoridated toothpaste is effective for dental caries control, yet may be a risk factor for dental fluorosis. This study aimed to quantify fluoride ingestion from toothpaste by children and to investigate the effects of age, gender, and social class on the amount of fluoride ingested per toothbrushing session. Sixty-one children, 4-6 yr of age, were recruited: 38 were from low socio-economic (LSE) areas of Newcastle, UK, and 23 were from high socio-economic (HSE) areas of Newcastle, UK. All expectorated saliva, rinse water (if used), and residual toothpaste were collected after brushing at home and were analysed for fluoride. Of the children, 74% and 69% from HSE and LSE areas, respectively, claimed that they brushed twice per day. The mean (SD) weight of toothpaste dispensed was 0.67 (0.36) g. The mean (SD) amount of fluoride ingested per toothbrushing session and per day was 17.0 (14.7) and 29.3 (32.8) μg kg(-1) of body weight, respectively. Daily fluoride intake per kilogram of body weight did not differ significantly between children from LSE and HSE areas. Fluoride intake per toothbrushing session was significantly influenced by weight of toothpaste, its fluoride concentration, and the child's age. Whilst the average amount of toothpaste used per toothbrushing session was more than twice the recommended amount (of 0.25 g), only one child had a daily fluoride intake that exceeded the tolerable upper intake level of 0.1 mg kg(-1) of body weight for this age group.

  20. Crystallization of heavy metal fluoride glasses

    Science.gov (United States)

    Bansal, Narottam P.; Bruce, Allan J.; Doremus, R. H.; Moynihan, C. T.

    1984-01-01

    The kinetics of crystallization of a number of fluorozirconate glasses were studied using isothermal and dynamic differential scanning calorimetry and X-ray diffraction. The addition of the fluorides LiF, NaF, AlF3, LaF3 to a base glass composition of ZrF4-BaF2 reduced the tendency to crystallize, probably by modifying the viscosity-temperature relation. ZrF4-BaF2-LaF3-AlF3-NaF glass was the most stable against devitrification and perhaps is the best composition for optical fibers with low scattering loss. Some glasses first crystallize out into metastable beta-BaZr2F10 and beta-BaZrF6 phases, which transform into the most stable alpha-phases when heated to higher temperatures. The size of the crystallites was estimated to be about 600 A from X-ray diffraction.

  1. Polymorphism Control of Poly(vinylidene fluoride)

    Science.gov (United States)

    Zheng, Jianfen; He, Aihua; Li, Junxing; Han, Charles C.

    2008-03-01

    Poly(vinylidene fluoride) (PVDF) is well-known for its polymorphism, and can exhibit five different polymorphs depending on its processing conditions. The α-phase is the most common and stable polymorph and the β-phase is the most important one due to its piezoelectric and pyroelectric properties. Polymorphism control of PVDF has been realized through electrospinning. PVDF fibrous membranes with fiber diameter in the range of 100 nm to several micrometers were produced by electrospinning and the crystal phase of electrospun PVDF fibers can be adjusted at the same time. Through the control of electrospinning parameters such as the solvent and electrospinning temperature, PVDF fibrous membranes containing mainly α- or β- or γ-phase could be fabricated successfully.

  2. Characterization of nanoscopic calcium fluoride films

    Science.gov (United States)

    Rehmer, A.; Kemnitz, E.

    2016-09-01

    Nano metal fluorides are appropriate materials for different applications e.g. heterogeneous catalysis, ceramic materials for laser applications and antireflective layers on glass, respectively. An easy way to synthesize such nano metal fluorides is the fluorolytic sol-gel synthesis which was developed some few years ago for HS-AlF3 [1] and MgF2.[2] CaF2 exhibits similar optical properties as MgF2, and thus, is a promising candidate for antireflective (AR) coatings. That means, CaF2 exhibits a lower refractive index (n500 = 1.44) as compared to common soda lime glass (n500 = 1.53). Hence, we present an easy synthesis approach toward nanoscaled CaF2 sols to fabricate finally AR-CaF2 films by dip coating. Irrespective of the choice of the calcium precursor, the CaF2 films are porous in comparison to thin dense CaF2 films which are generated by physical vapor deposition. The characterization of CaF2 films was performed by different analytical methods like HR-SEM, XPS, EDX, EP (ellipsometric porosimetry), DLS (dynamic light scattering) and CA (contact angle measurement). Beside the good optical and mechanical properties, we have investigated the surface properties of CaF2 films on glass and silicon wafer e.g. surface morphology with elemental composition, open porosity, zeta potentials at the surfaces as well as the free energy of interaction between water and the CaF2 film.

  3. Exraction and separation of CERIUM(IV/FLUORINE in fluoride-bearing cerium sulfate solution with fluoride coordination agent

    Directory of Open Access Journals (Sweden)

    Y. Li

    2014-07-01

    Full Text Available In this paper the extraction and separation of cerium/fluorine in fluoride-bearing cerium sulfate solution with fluoride coordination agent has been studied. The UV-vis spectra suggest that Zr6+ and Al3+ can scrub the F- from [CeF2] 2+ complex. The separation and conductivity studies show that aluminum salt is the most suitable fluoride coordination agent, and an ion-exchange reaction is involved between Ce4+/ [CeF2] 2+ and hydrogen ion.

  4. Preparation and Characterization of Rare Earth Doped Fluoride Nanoparticles

    Directory of Open Access Journals (Sweden)

    Timothy A. DeVol

    2010-03-01

    Full Text Available This paper reviews the synthesis, structure and applications of metal fluoride nanoparticles, with particular focus on rare earth (RE doped fluoride nanoparticles obtained by our research group. Nanoparticles were produced by precipitation methods using the ligand ammonium di-n-octadecyldithiophosphate (ADDP that allows the growth of shells around a core particle while simultaneously avoiding particle aggregation. Nanoparticles were characterized on their structure, morphology, and luminescent properties. We discuss the synthesis, properties, and application of heavy metal fluorides; specifically LaF3:RE and PbF2, and group IIA fluorides. Particular attention is given to the synthesis of core/shell nanoparticles, including selectively RE-doped LaF3/LaF3, and CaF2/CaF2 core/(multi-shell nanoparticles, and the CaF2-LaF3 system.

  5. A highly sensitive colorimetric and ratiometric sensor for fluoride ion

    Institute of Scientific and Technical Information of China (English)

    Zhao Wu Xu; Jin Tang; He Tian

    2008-01-01

    A new benzoimidazole-naphthalimide derivative 4 was synthesized and its photophysical properties were studied.This compound showed highly selectively and sensitive colorimetric and ratiometric sensing ability for fluoride anion.

  6. Fluoride-assisted synthesis of bimodal microporous SSZ-13 zeolite

    NARCIS (Netherlands)

    Zhu, Xiaochun; Kosinov, Nikolay; Hofmann, Jan P.; Mezari, Brahim; Qian, Qingyun; Rohling, Roderigh; Weckhuysen, Bert M.; Ruiz-Martinez, Javier; Hensen, Emiel J. M.

    2016-01-01

    The presence of small amount of fluoride in alkaline hydrothermal synthesis of SSZ-13 zeolite yields bimodal microporous particles with substantially improved performance in the methanol-to-olefins (MTO) reaction. Hydrocarbon uptake measurements and fluorescence microspectroscopy of spent catalysts

  7. Efficacy of silver diamine fluoride as an antibacterial as well as antiplaque agent compared to fluoride varnish and acidulated phosphate fluoride gel: An in vivo study

    Directory of Open Access Journals (Sweden)

    Shalin Shah

    2013-01-01

    Full Text Available Background: Silver diamine fluoride (SDF is already proven as an antibacterial agent in vitro. Present study was formulated to compare the efficacy of SDF as an antibacterial as well as antiplaque agent in vivo with fluoride varnish and acidulated phosphate fluoride (APF gel. Study Design: Total 123 children (male = 82, female = 41 were included in the study for a period of 18 months. Children were divided into three different groups-Group 1: SDF; Group 2: fluoride varnish; and Group 3: APF gel. All subjects were evaluated via plaque score at 6 th , 12 th , and 18 th months as well as Streptococcus mutans counts in saliva at 72 h, 6 th , 12 th , and 18 th months of follow-up. Results: Significant reduction was found in plaque score as well as S. mutans counts irrespective of group division. On intergroup comparison, no statistically significant difference was found in plaque score, but significant reduction in S. mutans counts was found in Group 1 as compared with Groups 2 and 3, while no significant difference was found between Groups 2 and 3. Conclusion: In vivo application of SDF on enamel significantly decreases S. mutans counts as compared to fluoride varnish and APF gel.

  8. Quantitative measure for the "nakedness" of fluoride ion sources.

    Science.gov (United States)

    Christe, Karl O; Jenkins, H Donald Brooke

    2003-08-01

    A quantitative measure for the donor strength or "nakedness" of fluoride ion donors is presented. It is based on the free energy change associated with the transfer of a fluoride ion from the donor to a given acceptor molecule. Born-Haber cycle calculations were used to calculate both the free energy and the enthalpy change for this process. The enthalpy change is given by the sum of the fluoride ion affinity of the acceptor (as defined in strict thermodynamic convention) and the lattice energy difference (DeltaU(POT)) between the fluoride ion donor and the salt formed with the acceptor. Because, for a given acceptor, the fluoride affinity has a constant value, the relative enthalpy (and also the corresponding free energy) changes are governed exclusively by the lattice energy differences. In this study, BF(3), PF(5), AsF(5), and SbF(5) were used as the acceptors, and the following seven fluoride ion donors were evaluated: CsF, N(CH(3))(4)F (TMAF), N-methylurotropinium fluoride (MUF), hexamethylguanidinium fluoride (HMGF), hexamethylpiperidinium fluoride (HMPF), N,N,N-trimethyl-1-adamantylammonium fluoride (TMAAF), and hexakis(dimethylamino)phosphazenium fluoride (HDMAPF). Smooth relationships between the enthalpy changes and the molar volumes of the donor cations were found which asymptotically approach constant values for infinitely large cations. Whereas CsF is a relatively poor F(-) donor [(U(POT)(CsF) - U(POT)(CsSbF(6))) = 213 kJ mol(-)(1)], when compared to N(CH(3))(4)F [(U(POT)(TMAF) - U(POT)(TMASbF(6))) = 69 kJ mol(-)(1)], a 4 times larger cation (phosphazenium salt) and an infinitely large cation are required to decrease DeltaU(POT) to 17 and 0 kJ mol(-)(1), respectively. These results clearly demonstrate that very little is gained by increasing the cation size past a certain level and that secondary factors, such as chemical and physical properties, become overriding considerations.

  9. Fluoride varnish: a primary prevention tool for dental caries.

    Science.gov (United States)

    Ramaswami, Neerrajah

    2008-01-01

    Fluoride varnish is an effective tool that has been proven to prevent dental caries both in primary and permanent dentition. Its ease of use, acceptability and efficacy make it an important tool in the primary prevention of dental caries in high-caries-risk children. There has been an increase in third-party reimbursement for fluoride varnish applications in high-risk children and adults.

  10. Electric field dependence of crystallinity in poly(vinylidene fluoride)

    Energy Technology Data Exchange (ETDEWEB)

    Kepler, R.G.; Anderson, R.A.; Lagasse, R.R.

    1982-05-03

    It is shown that the crystallinity of poled films of poly(vinylidene fluoride) can be changed by the application of an electric field. This is the first time that electric-field-induced changes of crystallinity in a polymer have been reported, and this observation confirms the hypothesis that reversible changes in crystallinity with temperature contribute significantly to the pyroelectric effect in poly(vinylidene fluoride).

  11. Electric Field Dependence of Crystallinity in Poly(Vinylidene Fluoride)

    Science.gov (United States)

    Kepler, R. G.; Anderson, R. A.; Lagasse, R. R.

    1982-05-01

    It is shown that the crystallinity of poled films of poly(vinylidene fluoride) can be changed by the application of an electric field. This is the first time that electric-field-induced changes of crystallinity in a polymer have been reported, and this observation confirms the hypothesis that reversible changes in crystallinity with temperature contribute significantly to the pyroelectric effect in poly(vinylidene fluoride).

  12. Fluoride-assisted synthesis of bimodal microporous SSZ-13 zeolite.

    Science.gov (United States)

    Zhu, Xiaochun; Kosinov, Nikolay; Hofmann, Jan P; Mezari, Brahim; Qian, Qingyun; Rohling, Roderigh; Weckhuysen, Bert M; Ruiz-Martínez, Javier; Hensen, Emiel J M

    2016-02-21

    The presence of small amount of fluoride in alkaline hydrothermal synthesis of SSZ-13 zeolite yields bimodal microporous particles with substantially improved performance in the methanol-to-olefins (MTO) reaction. Hydrocarbon uptake measurements and fluorescence microspectroscopy of spent catalysts demonstrate enhanced diffusion through micropores at the grain boundaries of nanocrystals running through the zeolite particles. Fluoride-assisted SSZ-13 synthesis is a cheap and scalable approach to optimize the performance of MTO zeolite catalysts.

  13. Heterolysis of Dihydrogen by Silver Alkoxides and Fluorides.

    Science.gov (United States)

    Tate, Brandon K; Nguyen, Jenna T; Bacsa, John; Sadighi, Joseph P

    2015-07-01

    Alkoxide-bridged disilver cations react with dihydrogen to form hydride-bridged cations, releasing free alcohol. Hydrogenolysis of neutral silver fluorides affords hydride-bridged disilver cations as their bifluoride salts. These reactions proceed most efficiently when the supporting ligands are expanded N-heterocyclic carbenes (NHCs) derived from 6- and 7-membered cyclic amidinium salts. Kinetics studies show that silver fluoride hydrogenolysis is first-order in both silver and dihydrogen.

  14. Molten fluoride mixtures as possible fission reactor fuels

    Energy Technology Data Exchange (ETDEWEB)

    Grimes, W.R.

    1978-01-01

    Molten mixtures of fluorides with UF/sub 4/ as a component have been used as combined fuel and primary heat transfer agent in experimental high-temperature reactors and have been proposed for use in breeders or converters of /sup 233/U from thorium. Such use places stringent and diverse demands upon the fluid fuel. A brief review of chemical behavior of molten fluorides is given to show some of their strengths and weaknesses for such service.

  15. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF FLUORIDE IN SAND

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-mei; SU Bao-yu

    2006-01-01

    The transport and transformation of fluoride in sand were studied by using soil tank test under the condition of saturated water in this article. Based on the analysis of the laboratory experiments, the rules of fluorine transportation and transformation were simulated in sand by solving the advection-diffusion equation. Through comparison between computed results and observed data , it is shown that the established model and determined parameters could be used to simulate the fluoride transport in sand.

  16. Response of grapevines to fluoride under field conditions

    Energy Technology Data Exchange (ETDEWEB)

    Murray, F.

    1983-07-01

    Grapevines (Vitis vinifera L. cv. Shiraz) were fumigated in open-top chambers with hydrogen fluoride for 64 days at mean atmospheric fluoride concentrations of 0.17 or 0.28 ..mu..gHFm/sup -3/. Other grapevines grown under ambient conditions in the vineyard or maintained in control chambers were exposed to 0.13 or 0.05 ..mu..gHFm/sup -3/, respectively. Leaves of grapevines exposed to 0.28, 0.17, 0.13, or 0.05 ..mu..gHFm/sup -3/ accumulated up to 85, 55, 20, or 11 ..mu..gFg/sup -1/, respectively. Foliar necrosis was observed on plants exposed to 0.28 ..mu..gHFm/sup -3/, but no injury symptoms were observed at 0.17 ..mu..gHFm/sup -3/ or in control plants. Grapevines growing under ambient conditions had significantly greater mean bunch weight, peduncle weight, number of grapes per bunch, and leaf protein levels than the fumigated treatments. However, these differences may be associated with a chamber effect rather than with an effect of fluoride on grapevines. No significant differences were found between treatments for grape potential alcohol content, fruit acids, number of bunches or grapes per vine, fresh weight of grapes, or leaf chlorophyll content, despite foliar fluoride concentrations in the highest fluoride fumigation level reaching 85 ..mu..gFg/sup -1/. No evidence was found of significant fluoride accumulation in berries or canes. 26 references, 4 tables.

  17. Determination of Fluoride in Organic and Non-organic Wines.

    Science.gov (United States)

    Paz, Soraya; Jaudenes, Juan Ramón; Gutiérrez, Angel José; Rubio, Carmen; Hardisson, Arturo; Revert, Consuelo

    2016-12-27

    Fluorine is an element of great importance to human health, as it is considered to be an essential element. However, both a deficiency and an excess, it can cause various problems. It is for this reason that values have been established regarding the recommended daily intake (RDI) and acceptable daily intake (ADI). The largest source of incorporation of fluoride is water, but it can be found in other foods and beverages, such as vegetables, tea, and wine. The aim of the study was to establish the fluoride concentration in organic and non-organic wines from different appellations of origin of the Canary Islands and mainland Spain, in order to assess the contribution of fluoride and toxic risk. A total of 53 samples of red, white, and rosé wines, both organic and non-organic, from different appellations of origin were analyzed. They were analyzed by potentiometric determination with ion-selective electrode for fluoride using the method of standard addition. The wines analyzed are within the recommended limits set by the International Organisation of Vine and Wine. RDI is not exceeded for adults, taking into account the data provided by the Spanish Agency for Consumer Affairs, Food Safety and Nutrition on the average consumption of "table wines" in Spain. Fluoride intake from wine poses no risk to the health of adults. The fluoride concentration of organic and non-organic wines is within the range of 0.03 to 0.70 mg/L.

  18. Fluorides in caries prevention and control: empiricism or science.

    Science.gov (United States)

    Ten Cate, J M

    2004-01-01

    The caries-preventive effects of fluoride are beyond any reasonable doubt! Inclusion of fluoride use in caries prevention protocols has resulted in significant reduction in caries prevalence in the majority of the population. Nevertheless, even in low-caries prevalence populations up to 20% of individuals may suffer to an unacceptable degree from caries. In the history of caries research various phases can be discerned. Starting with the initial - laboratory - studies to reveal the mode of action of fluoride, attention later shifted to intra-oral studies and in situ product testing. Currently much emphasis is given to evidence-based dentistry and guidelines for clinical practice, which trend has also focussed the research on fluoride and caries. While on some topics, such as the efficacy of fluoride toothpastes, evidence is convincing, additional research is indicated to resolve remaining questions. One such question is that of high-prevalence individuals for which a comprehensive research programme focussing both on caries aetiological and behavioural aspects should be further developed. Efforts should continue to be directed at improving our understanding of fluoride, in particular on topics where success so far has failed.

  19. Phosphate reduction in a hydroxyapatite fluoride removal system

    Science.gov (United States)

    Egner, A.

    2012-12-01

    Fluorosis is a widespread disease that occurs as a result of excess fluoride consumption and can cause severe tooth and bone deformations. To combat fluorosis, several previous studies have examined the potential to replace traditional bone char filters with synthetic hydroxyapatite. Calcite particles with a synthetic hydroxyapatite coating have been shown to effectively removed fluoride, yet the low-cost method for forming these particles leaves high amounts of phosphate both in synthesis waste-water and in filter effluent. High phosphate in filter effluent is problematic because consumption of extremely high phosphate can leach calcium from bones, further exacerbating the fluoride effect. This study examines ways of reducing and reusing waste. In particular, a method of fluoride removal is explored in which fluorapatite coatings may be formed directly. In preliminary studies, batches of 4.1g of Florida limestone (<710 μm) were equilibrated with 100 mL of 10ppm fluoride. In a control batch containing lime but no added phosphate, 14% treatment was achieved, but with added phosphate, 100% treatment was achieved in all batches. Batches with lower levels of phosphate took longer to reach 100% treatment, ranging from less than 24 hours in the highest phosphate batches to approximately 42 hours in the lowest batches. The lower levels tested were well within reasonable levels for drinking water and reached 0ppm fluoride in 42 hours or less.

  20. Community Water Fluoridation and Intelligence: Prospective Study in New Zealand.

    Science.gov (United States)

    Broadbent, Jonathan M; Thomson, W Murray; Ramrakha, Sandhya; Moffitt, Terrie E; Zeng, Jiaxu; Foster Page, Lyndie A; Poulton, Richie

    2015-01-01

    Objectives. This study aimed to clarify the relationship between community water fluoridation (CWF) and IQ. Methods. We conducted a prospective study of a general population sample of those born in Dunedin, New Zealand, between April 1, 1972, and March 30, 1973 (95.4% retention of cohort after 38 years of prospective follow-up). Residence in a CWF area, use of fluoride dentifrice and intake of 0.5-milligram fluoride tablets were assessed in early life (prior to age 5 years); we assessed IQ repeatedly between ages 7 to 13 years and at age 38 years. Results. No clear differences in IQ because of fluoride exposure were noted. These findings held after adjusting for potential confounding variables, including sex, socioeconomic status, breastfeeding, and birth weight (as well as educational attainment for adult IQ outcomes). Conclusions. These findings do not support the assertion that fluoride in the context of CWF programs is neurotoxic. Associations between very high fluoride exposure and low IQ reported in previous studies may have been affected by confounding, particularly by urban or rural status.

  1. Removal of fluoride from water using aluminium containing compounds

    Institute of Scientific and Technical Information of China (English)

    M. Karthikeyan; K. P. Elango

    2009-01-01

    Batch adsorption studies were undertaken to assess the suitability of aluminium titanate (AT) and bismuth aluminate (BA) to remove fluoride ions from water.The effect of pH,dose of adsorbent,contact time,initial concentration,co-ions and temperature on fluoride removal efficiency were studied.The amounts of fluoride ions adsorbed,at 30℃ from 4 mg/L of fluoride ion solution,by AT and BA are 0.85 and 1.55 mg/g,respectively.The experimental data fitted well to the Freundlich and Langmuir isotherms.Thermodynamic parameters such as △H~0,△S~0 and △G~0 indicated that the removal of fluoride ions by AT is exothermic and non-spontaneous while that by BA is endothermic and spontaneous.Furrier transform infrared (FT-IR) analysis and X-ray diffraction (XRD) patterns of the adsorbent before and after adsorption indicated that fluoride ions are chemisorbed by these adsorbents.

  2. Preparation of mixed rare earths modified chitosan for fluoride adsorption

    Institute of Scientific and Technical Information of China (English)

    梁鹏; 张艺; 汪东风; 徐莹; 罗斓

    2013-01-01

    This paper described the fluoride removal from water using a new adsorbent namely mixed rare earths modified chitosan (CR). Mixed rare earths mainly contained La followed by Ce which was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). La(III)-modified chitosan (CL) was also prepared as control. For the batch technique, the effects of various parameters such as contact time, pH, adsorbent dose, initial fluoride concentration and co-ions on fluoride adsorption were studied. Fourier trans-form infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to characterize adsorbents. It was observed that the fluo-ride adsorption capacity of CR (3.72 mgF-/g) was higher than CL (3.16 mgF-/g) at 2 h. The presence of co-ions such as bicarbonate and carbonate greatly affected the fluoride adsorption from water. Characterization experiments indicated the successful chelation between mixed rare earths and chitosan. The possible fluoride adsorption mechanism of CR was explained by a chemical reaction.

  3. Monitoring of fluoride in water samples using a smartphone.

    Science.gov (United States)

    Levin, Saurabh; Krishnan, Sunderrajan; Rajkumar, Samuel; Halery, Nischal; Balkunde, Pradeep

    2016-05-01

    In several parts of India, groundwater is the only reliable, year round source for drinking water. Prevention of fluorosis, a chronic disease resulting from excess intake of fluoride, requires the screening of all groundwater sources for fluoride in endemic areas. In this paper, the authors present a field deployable colorimetric analyzer based on an inexpensive smartphone embedded with digital camera for taking photograph of the colored solution as well as an easy-fit, and compact sample chamber (Akvo Caddisfly). Phones marketed by different smartphone makers were used. Commercially available zirconium xylenol orange reagent was used for determining fluoride concentration. A software program was developed to use with the phone for recording and analyzing the RGB color of the picture. Linear range for fluoride estimation was 0-2mgl(-1). Around 200 samples, which consisted of laboratory prepared as well as field samples collected from different locations in Karnataka, India, were tested with Akvo Caddisfly. The results showed a significant positive correlation between Ion Selective Electrode (ISE) method and Akvo Caddisfly (Phones A, B and C), with correlation coefficient ranging between 0.9952 and 1.000. In addition, there was no significant difference in the mean fluoride content values between ISE and Phone B and C except for Phone A. Thus the smartphone method is economical and suited for groundwater fluoride analysis in the field.

  4. Fluoride and aluminum in teas and tea-based beverages

    Directory of Open Access Journals (Sweden)

    Hayacibara Mitsue Fujimaki

    2004-01-01

    Full Text Available OBJECTIVE: To evaluate fluoride and aluminum concentration in herbal, black, ready-to-drink, and imported teas available in Brazil considering the risks fluoride and aluminum pose to oral and general health, respectively. METHODS: One-hundred and seventy-seven samples of herbal and black tea, 11 types of imported tea and 21 samples of ready-to-drink tea were divided into four groups: I-herbal tea; II-Brazilian black tea (Camellia sinensis; III-imported tea (Camellia sinensis; IV-ready-to-drink tea-based beverages. Fluoride and aluminum were analyzed using ion-selective electrode and atomic absorption, respectively. RESULTS: Fluoride and aluminum levels in herbal teas were very low, but high amounts were found in black and ready-to-drink teas. Aluminum found in all samples analyzed can be considered safe to general health. However, considering 0.07 mg F/kg/day as the upper limit of fluoride intake with regard to undesirable dental fluorosis, some teas exceed the daily intake limit for children. CONCLUSIONS: Brazilian and imported teas made from Camellia sinensis as well as some tea-based beverages are sources of significant amounts of fluoride, and their intake may increase the risk of developing dental fluorosis.

  5. High index fluoride materials for 193nm immersion lithography

    Science.gov (United States)

    Nawata, T.; Inui, Y.; Masada, I.; Nishijima, E.; Satoh, H.; Fukuda, T.

    2006-03-01

    We tried to investigate various kinds of metal fluoride materials which have higher gravity than CaF II and cubic crystal system, and we found out barium lithium fluoride (BaLiF 3) and potassium yttrium fluoride (KY 3F 10) as candidates for the last lens material. We have developed unique Czochralski (CZ) machines and techniques for the growth of large calcium fluoride single crystals. And we applied these technologies to the growth of fluoride high index materials. We have succeeded to grow the large BaLiF 3 single crystal with 120mm in diameter and a KY 3F 10 single crystal, and measured their basic properties such as refractive index, VUV transmittance, birefringence, and so on. As a result of our basic research, we found out that BaLiF 3 single crystal is transparent at VUV region, and the refractive index at 193nm is 1.64, and KY 3F 10 single crystal has the index of 1.59 at the wavelength of 193nm which is slightly higher than fused silica. We expect that these fluoride high index materials are useful for the last lens material of the next generation immersion lithography.

  6. Comparison of in vitro fluoride uptake from whitening toothpastes and a conventional toothpaste in demineralised enamel.

    Science.gov (United States)

    Altenburger, Markus J; Bernhart, Jasmin; Schicha, Thurid D; Wrbas, Karl-Thomas; Hellwig, Elmar

    2010-01-01

    Studies on the compatibility of abrasives and fluoride compounds deal exclusively with fluoride uptake and remineralization after storing the enamel specimens in a toothpaste-saliva mixture. The influence of brushing on the fluoride uptake when highly abrasive toothpastes are used has hardly been investigated so far. The aim of the present study was to investigate fluoride uptake in initially demineralised dental enamel after storage in, or brushing with, whitening toothpaste slurries, compared to a conventional toothpaste. For this purpose two widely available whitening toothpastes with ionically bound fluoride (sodium fluoride NaF), two with covalently-bound fluoride toothpastes (sodium monofluorophosphate, NaMFP) and a conventional amine fluoride toothpaste (AmF) were compared. The fluoride uptake after use of the AmF toothpaste was shown to be statistically significantly higher than that after application of the NaF toothpastes, which in turn was statistically significantly higher than the uptake resulting from NaMFP application. The fluoride uptake was slightly higher when the enamel samples were brushed with NaF toothpaste, rather than just stored in the respective toothpaste slurry. Brushing with highly abrasive toothpastes did not negatively influence fluoride uptake in demineralised dental enamel. The ionic form of the fluoride in toothpastes appears to be critical for increased fluoride uptake. The acidic components of the AmF toothpaste improved fluoride uptake compared to alkaline NaF toothpastes.

  7. High Temperature Fluoride Salt Test Loop

    Energy Technology Data Exchange (ETDEWEB)

    Aaron, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cunningham, Richard Burns [Univ. of Tennessee, Knoxville, TN (United States); Fugate, David L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Holcomb, David Eugene [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peretz, Fred J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Dane F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yoder, Jr, Graydon L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-12-01

    Effective high-temperature thermal energy exchange and delivery at temperatures over 600°C has the potential of significant impact by reducing both the capital and operating cost of energy conversion and transport systems. It is one of the key technologies necessary for efficient hydrogen production and could potentially enhance efficiencies of high-temperature solar systems. Today, there are no standard commercially available high-performance heat transfer fluids above 600°C. High pressures associated with water and gaseous coolants (such as helium) at elevated temperatures impose limiting design conditions for the materials in most energy systems. Liquid salts offer high-temperature capabilities at low vapor pressures, good heat transport properties, and reasonable costs and are therefore leading candidate fluids for next-generation energy production. Liquid-fluoride-salt-cooled, graphite-moderated reactors, referred to as Fluoride Salt Reactors (FHRs), are specifically designed to exploit the excellent heat transfer properties of liquid fluoride salts while maximizing their thermal efficiency and minimizing cost. The FHR s outstanding heat transfer properties, combined with its fully passive safety, make this reactor the most technologically desirable nuclear power reactor class for next-generation energy production. Multiple FHR designs are presently being considered. These range from the Pebble Bed Advanced High Temperature Reactor (PB-AHTR) [1] design originally developed by UC-Berkeley to the Small Advanced High-Temperature Reactor (SmAHTR) and the large scale FHR both being developed at ORNL [2]. The value of high-temperature, molten-salt-cooled reactors is also recognized internationally, and Czechoslovakia, France, India, and China all have salt-cooled reactor development under way. The liquid salt experiment presently being developed uses the PB-AHTR as its focus. One core design of the PB-AHTR features multiple 20 cm diameter, 3.2 m long fuel channels

  8. Phytotoxicity of sodium fluoride and uptake of fluoride in willow trees.

    Science.gov (United States)

    Clausen, Lauge Peter Westergaard; Karlson, Ulrich Gosewinkel; Trapp, Stefan

    2015-01-01

    The willow tree (Salix viminalis) toxicity test and a cress seed germination test (Lepidium sativum) were used to determine uptake of F and phytotoxicity of NaF. Concentrations in hydroponic solutions were 0-1000 mg F/L and 0-400 mg F/L in the preliminary and definitive test. A third test was done with soils collected from a fluoride-contaminated site at Fredericia, Denmark. The EC10, EC20 and EC50-values for inhibition of transpiration were determined to 38.0, 59.6 and 128.7 mg F/L, respectively. The toxicity test with soil showed strong inhibition for the sample with the highest fluoride concentration (405 mg free F per kg soil, 75 mg F per L soil solution). The seed germination and root elongation test with cress gave EC10, EC20 and EC50-values of 61.4, 105.0 and 262.8 mg F/L, respectively. At low external concentrations, fluoride was taken up more slowly than water and at high external concentrations at the same velocity. This indicates that an efflux pump becomes overloaded at concentrations above 210 mg F/L. Uptake kinetics were simulated with a non-linear mathematical model, and the Michaelis-Menten parameters were determined to half-saturation constant KM near 2 g F/L and maximum enzymatic removal rate vmax at 9 g/(kg d).

  9. Chemico-therapeutic approach to prevention of dental caries. [using stannous fluoride gel

    Science.gov (United States)

    Shannon, I. L.

    1975-01-01

    The program of chemical preventive dentistry is based primarily upon the development of a procedure for stabilizing stannous fluoride in solution by forcing it into glycerin. New topical fluoride treatment concentrates, fluoride containing gels and prophylaxis pastes, as well as a completely stable stannous fluoride dentifrice are made possible by the development of a rather complicated heat application method to force stannous fluoride into solution in glycerin. That the stannous fluoride is clinically effective in such a preparation is demonstrated briefly on orthodontic patients.

  10. Fluoride inhibition of Sporosarcina pasteurii urease: structure and thermodynamics.

    Science.gov (United States)

    Benini, Stefano; Cianci, Michele; Mazzei, Luca; Ciurli, Stefano

    2014-12-01

    Urease is a nickel-dependent enzyme and a virulence factor for ureolytic bacterial human pathogens, but it is also necessary to convert urea, the most worldwide used fertilizer, into forms of nitrogen that can be taken up by crop plants. A strategy to control the activity of urease for medical and agricultural applications is to use enzyme inhibitors. Fluoride is a known urease inhibitor, but the structural basis of its mode of inhibition is still undetermined. Here, kinetic studies on the fluoride-induced inhibition of urease from Sporosarcina pasteurii, a widespread and highly ureolytic soil bacterium, were performed using isothermal titration calorimetry and revealed a mixed competitive and uncompetitive mechanism. The pH dependence of the inhibition constants, investigated in the 6.5-8.0 range, reveals a predominant uncompetitive mechanism that increases by increasing the pH, and a lesser competitive inhibition that increases by lowering the pH. Ten crystal structures of the enzyme were independently determined using five crystals of the native form and five crystals of the protein crystallized in the presence of fluoride. The analysis of these structures revealed the presence of two fluoride anions coordinated to the Ni(II) ions in the active site, in terminal and bridging positions. The present study consistently supports an interaction of fluoride with the nickel centers in the urease active site in which one fluoride competitively binds to the Ni(II) ion proposed to coordinate urea in the initial step of the catalytic mechanism, while another fluoride uncompetitively substitutes the Ni(II)-bridging hydroxide, blocking its nucleophilic attack on urea.

  11. Profile of Fluoride Release from a Nanohybrid Composite Resin

    Directory of Open Access Journals (Sweden)

    Raquel Assed Bezerra Silva

    2015-02-01

    Full Text Available The aim of this study was to evaluate in vitro the amount and profile of fluoride release from a fluoride-containing nanohybrid composite resin (Tetric® N-Ceram by direct potentiometry. Thirty specimens (5 mm diameter x 3 mm high; n=10/material were made of Tetric® N-Ceram, Vitremer® resin-modified glass ionomer cement (RMGIC (positive control or Filtek® Z350 nanofill composite resin (negative control. The specimens were stored individually in plastic tubes containing 1 mL of artificial saliva at 37°C, which was daily renewed during 15 days. At each renewal of saliva, the amount of fluoride ions released in the solution was measured using a fluoride ion-selective electrode with ion analyzer, and the values obtained in mV were converted to ppm (µg/mL. Data were analyzed statistically by ANOVA and Tukey’s post-hoc test at a significance level of 5%. The results showed that the resins Tetric® N-Ceram and Filtek® Z350 did not release significant amounts of fluoride during the whole period of evaluation (p>0.05. Only Vitremer® released significant amounts of fluoride ions during the 15 days of the experiment, with greater release in first 2 days (p0.05. In conclusion, the nanohybrid composite resin Tetric® N-Ceram did not present in vitro fluoride-releasing capacity throughout the 15 days of study.

  12. Stabilization of fluoroindate glasses by magnesium fluoride and other heavy metal fluorides

    Directory of Open Access Journals (Sweden)

    B. J. Costa

    1998-06-01

    Full Text Available Their extended transparency in the IR makes them attractive for use as optical fibers for CO laser power delivery and optical amplification. This paper firstly describes the spectacular stabilizing effect of MgF2 on the binary system InF3-BaF2. The investigation of the InF3-BaF2-MgF2 system led to samples up to 5mm in thickness. Further optimization of this system was achieved by incorporation of limited amounts of other fluorides and resulted in increased resistence to devitrification. The second approach of this work was concerned to the investigation of the pseudo-ternary system InF3-GdF3-GaF3 at constant concentrations of ZnF2-SrF2-BaF2-NaF. Several compositions were studied in this system. The samples presented a better thermal stability when compared to other families of fluoride glasses. Therefore, these glasses seem to be very promising for the fabrication of special optical fibers. Thermal data are reported.

  13. An Overview of Liquid Fluoride Salt Heat Transport Systems

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Cetiner, Sacit M [ORNL

    2010-09-01

    Heat transport is central to all thermal-based forms of electricity generation. The ever increasing demand for higher thermal efficiency necessitates power generation cycles transitioning to progressively higher temperatures. Similarly, the desire to provide direct thermal coupling between heat sources and higher temperature chemical processes provides the underlying incentive to move toward higher temperature heat transfer loops. As the system temperature rises, the available materials and technology choices become progressively more limited. Superficially, fluoride salts at {approx}700 C resemble water at room temperature being optically transparent and having similar heat capacity, roughly three times the viscosity, and about twice the density. Fluoride salts are a leading candidate heat-transport material at high temperatures. Fluoride salts have been extensively used in specialized industrial processes for decades, yet they have not entered widespread deployment for general heat transport purposes. This report does not provide an exhaustive screening of potential heat transfer media and other high temperature liquids such as alkali metal carbonate eutectics or chloride salts may have economic or technological advantages. A particular advantage of fluoride salts is that the technology for their use is relatively mature as they were extensively studied during the 1940s-1970s as part of the U.S. Atomic Energy Commission's program to develop molten salt reactors (MSRs). However, the instrumentation, components, and practices for use of fluoride salts are not yet developed sufficiently for commercial implementation. This report provides an overview of the current understanding of the technologies involved in liquid salt heat transport (LSHT) along with providing references to the more detailed primary information resources. Much of the information presented here derives from the earlier MSR program. However, technology has evolved over the intervening years

  14. An Overview of Liquid Fluoride Salt Heat Transport Systems

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Cetiner, Sacit M [ORNL

    2010-09-01

    Heat transport is central to all thermal-based forms of electricity generation. The ever increasing demand for higher thermal efficiency necessitates power generation cycles transitioning to progressively higher temperatures. Similarly, the desire to provide direct thermal coupling between heat sources and higher temperature chemical processes provides the underlying incentive to move toward higher temperature heat transfer loops. As the system temperature rises, the available materials and technology choices become progressively more limited. Superficially, fluoride salts at {approx}700 C resemble water at room temperature being optically transparent and having similar heat capacity, roughly three times the viscosity, and about twice the density. Fluoride salts are a leading candidate heat-transport material at high temperatures. Fluoride salts have been extensively used in specialized industrial processes for decades, yet they have not entered widespread deployment for general heat transport purposes. This report does not provide an exhaustive screening of potential heat transfer media and other high temperature liquids such as alkali metal carbonate eutectics or chloride salts may have economic or technological advantages. A particular advantage of fluoride salts is that the technology for their use is relatively mature as they were extensively studied during the 1940s-1970s as part of the U.S. Atomic Energy Commission's program to develop molten salt reactors (MSRs). However, the instrumentation, components, and practices for use of fluoride salts are not yet developed sufficiently for commercial implementation. This report provides an overview of the current understanding of the technologies involved in liquid salt heat transport (LSHT) along with providing references to the more detailed primary information resources. Much of the information presented here derives from the earlier MSR program. However, technology has evolved over the intervening years

  15. Recommendations for fluoride limits in drinking water based on estimated daily fluoride intake in the Upper East Region, Ghana.

    Science.gov (United States)

    Craig, Laura; Lutz, Alexandra; Berry, Kate A; Yang, Wei

    2015-11-01

    Both dental and skeletal fluorosis caused by high fluoride intake are serious public health concerns around the world. Fluorosis is particularly pronounced in developing countries where elevated concentrations of naturally occurring fluoride are present in the drinking water, which is the primary route of exposure. The World Health Organization recommended limit of fluoride in drinking water is 1.5 mg F(-) L(-1), which is also the upper limit for fluoride in drinking water for several other countries such as Canada, China, India, Australia, and the European Union. In the United States the enforceable limit is much higher at 4 mg F(-) L(-1), which is intended to prevent severe skeletal fluorosis but does not protect against dental fluorosis. Many countries, including the United States, also have notably lower unenforced recommended limits to protect against dental fluorosis. One consideration in determining the optimum fluoride concentration in drinking water is daily water intake, which can be high in hot climates such as in northern Ghana. The results of this study show that average water intake is about two times higher in Ghana than in more temperate climates and, as a result, the fluoride intake is higher. The results also indicate that to protect the Ghanaian population against dental fluorosis, the maximum concentration of fluoride in drinking water for children under 6-8 years should be 0.6 mg F(-) L(-1) (and lower in the first two years of life), and the limit for older children and adults should be 1.0 mg F(-) L(-1). However, when considering that water treatment is not cost-free, the most widely recommended limit of 1.5 mg F(-) L(-1) - which is currently the limit in Ghana--may be appropriate for older children and adults since they are not vulnerable to dental fluorosis once the tooth enamel is formed.

  16. Aquaporin 5 Interacts with Fluoride and Possibly Protects against Caries.

    Directory of Open Access Journals (Sweden)

    Ida Anjomshoaa

    Full Text Available Aquaporins (AQP are water channel proteins and the genes coding for AQP2, AQP5, and AQP6 are clustered in 12q13. Since AQP5 is expressed in serous acinar cells of salivary glands, we investigated its involvement in caries. DNA samples from 1,383 individuals from six groups were studied. Genotypes of eight single nucleotide polymorphisms covering the aquaporin locus were tested for association with caries experience. Interaction with genes involved in enamel formation was tested. The association between enamel microhardness at baseline, after creation of artificial caries lesion, and after exposure to fluoride and the genetic markers in AQP5 was tested. Finally, AQP5 expression in human whole saliva, after exposure to fluoride in a mammary gland cell line, which is known to express AQP5, and in Wistar rats was also verified. Nominal associations were found between caries experience and markers in the AQP5 locus. Since these associations suggested that AQP5 may be inhibited by levels of fluoride in the drinking water that cause fluorosis, we showed that fluoride levels above optimal levels change AQP5 expression in humans, cell lines, and rats. We have shown that AQP5 is involved in the pathogenesis of caries and likely interacts with fluoride.

  17. Ultrastructural evaluation of enamel after dental bleaching associated with fluoride.

    Science.gov (United States)

    Dominguez, John A; Bittencourt, Bruna; Michel, Milton; Sabino, Nilson; Gomes, João Carlos; Gomes, Osnara M M

    2012-08-01

    This study evaluated the effects on human enamel after two bleaching procedures: with a fluoridated bleaching agent and with topical fluoride application postbleaching. It used 43 enamel blocks (3 mm(2) ) that were ground flat (600-2,000 grit) and polished with polishing paste (one and one-fourth). Specimens were randomly divided into three groups according to the bleaching procedure: (1) control group, (2) hydrogen peroxide 35% (HPF) and topical application of fluoride 1.23%, and (3) HP 38% (OP) with fluoride in its composition. Bleaching agents were used according to the manufacturer's instructions. Three methodologies were used: nanoindentation, to observe surface hardness and elastic modulus; atomic force microscopy, to observe surface roughness (R(a) - R(z)); and scanning electron microscopy, to observe the enamel surface effects. Group OP had a decrease in the elastic modulus after bleaching, which was recovered at 14 days. An increased roughness (R(a); 32%) was observed on group HPF and had an increased erosion on enamel surface (67%). It was concluded that topical application of fluoride, after using the nonfluoridated whitening agent, increased the roughness values and erosion of enamel.

  18. Removal of fluoride ions from aqueous solution by waste mud

    Energy Technology Data Exchange (ETDEWEB)

    Kemer, Baris; Ozdes, Duygu; Gundogdu, Ali; Bulut, Volkan N.; Duran, Celal [Karadeniz Technical University, Faculty of Arts and Sciences, Department of Chemistry, 61080 Trabzon (Turkey); Soylak, Mustafa, E-mail: soylak@erciyes.edu.tr [Erciyes University, Faculty of Arts and Sciences, Department of Chemistry, 38039 Kayseri (Turkey)

    2009-09-15

    The present study was carried out to assess the ability of original waste mud (o-WM) and different types of activated waste mud which are acid-activated (a-WM) and precipitated waste mud (p-WM), in order to remove excess of fluoride from aqueous solution by using batch technique. The p-WM exhibited greater performance than the others. Adsorption studies were conducted as a function of pH, contact time, initial fluoride concentration, adsorbent concentration, temperature, etc. Studies were also performed to understand the effect of some co-existing ions present in aqueous solutions. Adsorption process was found to be almost independent of pH for all types of waste mud. Among the kinetic models tested for p-WM, pseudo-second-order model fitted the kinetic data well with a perfect correlation coefficient value of 1.00. It was found that the adequate time for the adsorption equilibrium of fluoride was only 1 h. Thermodynamic parameters including the Gibbs free energy ({Delta}G{sup o}), enthalpy ({Delta}H{sup o}), and entropy ({Delta}S{sup o}) revealed that adsorption of fluoride ions on the p-WM was feasible, spontaneous and endothermic in the temperature range of 0-40 deg. C. Experimental data showed a good fit with the Langmuir and Freundlich adsorption isotherm models. Results of this study demonstrated the effectiveness and feasibility of WM for removal of fluoride ions from aqueous solution.

  19. Estimation of fluoride levels in various commercially available carbonated soft drinks in Chandigarh city, India

    Directory of Open Access Journals (Sweden)

    Mohit Bansal

    2015-01-01

    Full Text Available Introduction: Fluoride has a preventive action on dental caries. However, Excessive ingestion of fluoride from different sources can lead to the development of dental fluorosis. Aim: To estimate fluoride levels in various commercially available carbonated soft drinks available in Chandigarh city. Materials and Methods: Twelve different brands of commercially available soft drinks were purchased from three different places and divided into three groups. Fluoride levels were estimated using fluoride test strips Quantofix 37211 Fluka; Sigma-Aldrich. Results: Fluoride levels ranged from 0.12 to 0.42 mg/dl F with the maximum level in Thumbs up and least in Diet Pepsi. Conclusion: The levels of fluoride varied in various carbonated soft drinks analyzed. This could contribute significantly to the total fluoride intake from all sources and thus be an important risk factor for the development of dental fluorosis.

  20. Corrosion Behavior of Titanium Grade 7 in Fluoride-Containing NaCl Brines

    Energy Technology Data Exchange (ETDEWEB)

    Lian, T; Whalen, M T; Wong, L

    2004-10-25

    The effects of fluoride on the corrosion behavior of Titanium Grade 7 (0.12-0.25% Pd) have been investigated. Up to 0.1 mol/L fluoride was added to the NaCl brines at 95 C, and three pH values of 4, 8, and 11 were selected for studying pH dependence of fluoride effects. It was observed that fluoride significantly altered the anodic polarization behavior, at all three pH values of 4, 8, and 11. Under acidic condition fluoride caused active corrosion. The corrosion of Titanium grade 7 was increased by three orders of magnitude when a 0.1 mol/L fluoride was added to the NaCl brines at pH 4, and the Pd ennoblement effect was not observed in acidic fluoride-containing environments. The effects of fluoride were reduced significantly when pH was increased to 8 and above.

  1. A NOVEL BIO-WASTE INCORPORATED ALGINATE SORBENT FOR DE-FLUORIDATION OF WATER

    Directory of Open Access Journals (Sweden)

    Carmalin Sophia Ayyappan

    2015-09-01

    Full Text Available This study evaluates the feasibility of using tamarind (Tamarindus indica seed powder for de-fluoridation of fluoride contaminated water. Batch study confirmed that tamarind seeds in dry powder form could remove 87% of fluoride from water. This bio-sorbent can be used effectively in areas where fluoride concentrations are above the permissible limits of 1.5 mg·l-1 as per WHO Standard, 1984. Tamarind seed powder was incorporated in a matrix of sodium alginate and made into gel-beads. The beads were tested for de-fluoridation efficiency by conducting column studies. The effect of various factors, such as flow rate, retention time, and the number of runs on the efficacy of fluoride removal was also studied. The results revealed that flow rate did not seem to have much effect on the percentage fluoride removal but the fluoride concentration decreased drastically upon greater retention time and multiple runs.

  2. Caries status in 16 year-olds with varying exposure to water fluoridation in Ireland.

    LENUS (Irish Health Repository)

    Mullen, J

    2012-12-01

    Most of the Republic of Ireland\\'s public water supplies have been fluoridated since the mid-1960s while Northern Ireland has never been fluoridated, apart from some small short-lived schemes in east Ulster.

  3. Effect of sodium fluoride in maternal and offspring rats and its amelioration

    Directory of Open Access Journals (Sweden)

    Sneha Panchal

    2014-03-01

    Full Text Available High fluoride content is known to cause dental and skeletal abnormalities. In addition, present review indicates that sodium fluoride consumption caused increased number of r=esorptions and dead foetuses. Various skeletal anomalies such as wavy ribs, presence of 14th ribs, lacking 6th sternebrae and incompete ossification of skull occur. All these changes could be due to oxidative stress caused by fluoride consumption. Fluoride-induced changes could be successfully ameliorated by cotreatment with vitamins and calcium.

  4. Absorption, distribution and excretion of inhaled hydrogen fluoride in the rat

    Energy Technology Data Exchange (ETDEWEB)

    Morris, J.B.

    1979-01-01

    Rats were subjected to whole body HF exposure for 6 hrs or to nose-only HF exposure for 1 hr. Total and/or ionic fluoride concentrations in selected tissues were determined at various times following exposure. In rats sacrificed 6 hrs after whole body exposure, dose-dependent increases in lung, plasma, and kidney total and ionic fluoride concentration occurred. Rats excreted more fluoride in the urine after whole body exposure than could be explained by the amount of HF inhaled. Considerable evidence suggests that airborne HF deposits on fur and is then ingested due to preening activity. Urinary fluoride excretion was increased by nose-only exposure. The urinary fluoride excretion accounted for approximately twice the fluoride estimated to be inhaled during exposure. Tissue fluoride concentrations were elevated immediately after nose-only exposure. Fluoride concentrations in lung and kidney returned to control levels within 12 hrs. Plasma fluoride concentration was slightly elevated 24 hrs after the start of the 1 hr exposure but was at control levels at 96 hrs. Immediately following nose-only exposure, lung ionic fluoride concentrations were less than plasma ionic fluoride concentrations suggesting that the fluoride in the lung had reached that site via plasma transport rather than by inhalation. A dose-dependent increase in plasma ionic fluoride concentration occurred after upper respiratory tract HF exposure providing strong evidence that fluoride is absorbed systemically from that site. The plasma ionic fluoride concentration after upper respiratory tract exposure was of sufficient magnitude to account for the plasma fluoride concentrations observed in intact nose-only exposed rats. (ERB)

  5. Batch and Column Experiments on Fluoride Removal from Waters Using Modified Zeolite

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    High fluoride groundwater occurs widely in China, presenting a quite serious environmental problem. Zeolite from Xinyang, China was tested as the fluoride-removing adsorbent. Batch and column experiments on fluoride removal using modified zeolites treated with hydrochloric acid,sodium hydroxide, sodium chloride and ferric chloride, respectively show that 0. 1 mol/L HCImodified zeolite can be used as an adsorbent for fluoride, with an adsorption capacity of 173. 16mg/kg.

  6. Fluorescent naphthalene-based benzene tripod for selective recognition of fluoride in physiological condition

    Indian Academy of Sciences (India)

    Barun kumar Datta; Chirantan Kar; Gopal Das

    2015-02-01

    Aluminium complex of a naphthalene-based benzene tripod ligand system has been reported for the selective recognition of fluoride in aqueous medium in physiological condition. The ligand can selectively recognize Al3+ through enhancement in the fluorescence intensity and this in situ formed aluminium complex recognizes fluoride through quenching of fluorescence. The receptor system detects fluoride in nanomolar range. The sensing property was extended for practical utility to sense fluoride in tap water, pond water and river water.

  7. Effect of sodium fluoride in maternal and offspring rats and its amelioration

    Institute of Scientific and Technical Information of China (English)

    SnehaPanchal; RamtejJ. Verma

    2014-01-01

    High fluoride content is known to cause dental and skeletal abnormalities. In addition, present review indicates that sodium fluoride consumption caused increased number of r=esorptions and dead foetuses. Various skeletal anomalies such as wavy ribs, presence of 14th ribs, lacking 6th sternebrae and incompete ossification of skull occur. All these changes could be due to oxidative stress caused by fluoride consumption. Fluoride-induced changes could be successfully ameliorated by cotreatment with vitamins and calcium.

  8. Highly Selective Fluoride Recognition by a Simple Carbazole-based Hydrozone Derivative

    Institute of Scientific and Technical Information of China (English)

    TANG Li-jun; ZHAO Guo-you; HUANG Zhen-long; WANG Nan-nan; GUO Jiao-jiao

    2013-01-01

    A simple carbazole hydrozone derivative(1) was synthesized and used as an optical probe for fluoride recognition in CH3CN.Receptor 1 exhibited colorimetric and fluorescent dual-channel response to fluoride anions.Addition of fluoride to a receptor 1 solution in CH3CN induced a distinct color change from yellow to magenta,the solution also displayed significant fluorescence blue shift.Thus receptor 1 exhibited dual-channel responses to fluoride with a high selectivity and sensitivity.

  9. Risk Assessment of Fluoride Intake from Tea in the Republic of Ireland and its Implications for Public Health and Water Fluoridation

    Science.gov (United States)

    Waugh, Declan T.; Potter, William; Limeback, Hardy; Godfrey, Michael

    2016-01-01

    The Republic of Ireland (RoI) is the only European Country with a mandatory national legislation requiring artificial fluoridation of drinking water and has the highest per capita consumption of black tea in the world. Tea is a hyperaccumulator of fluoride and chronic fluoride intake is associated with multiple negative health outcomes. In this study, fifty four brands of the commercially available black tea bag products were purchased and the fluoride level in tea infusions tested by an ion-selective electrode method. The fluoride content in all brands tested ranged from 1.6 to 6.1 mg/L, with a mean value of 3.3 mg/L. According to our risk assessment it is evident that the general population in the RoI is at a high risk of chronic fluoride exposure and associated adverse health effects based on established reference values. We conclude that the culture of habitual tea drinking in the RoI indicates that the total cumulative dietary fluoride intake in the general population could readily exceed the levels known to cause chronic fluoride intoxication. Evidence suggests that excessive fluoride intake may be contributing to a wide range of adverse health effects. Therefore from a public health perspective, it would seem prudent and sensible that risk reduction measures be implemented to reduce the total body burden of fluoride in the population. PMID:26927146

  10. Influence of milk products on fluoride bioavailability in man.

    Science.gov (United States)

    Ekstrand, J; Ehrnebo, M

    1979-09-01

    The effect of milk products on the gastrointestinal absorption of fluoride from sodium fluoride tablets was studied in five healthy subjects. Two different diets were tested: (1) 250 ml standardized milk (3% fat) and (2) 500 ml of milk, 3 pieces of white bread with cheese and 150 ml of yoghurt. The 100% bioavailability of sodium fluoride tablets during fasting was greatly decreased by coadministration of milk products: with Diet 1 the absolute bioavailability calculated from combined plasma and urine data was in the range 50--79% and with Diet 2 it ranged from 50--71%. It is suggested that the decreased bioavailability produced by dairy products should be taken into account when establishing flouride dosage regimens for prophylaxis of caries.

  11. Antimicrobial and fluoride release capacity of orthodontic bonding materials

    Directory of Open Access Journals (Sweden)

    Erika Machado Caldeira

    2013-07-01

    Full Text Available OBJECTIVE: The aim of this study was to evaluate the antimicrobial and fluoride releasing capacity of 3 bonding materials. MATERIAL AND METHODS: Thirty nine specimens with standardized surface smoothness and dimensions were prepared. The antimicrobial capacity of the materials against S. mutans, L. casei and C. albicans was evaluated by determining the percentage of growth inhibition of these microorganisms in an inoculated medium, obtained by optical density readouts on a spectrophotometer. The potential to interfere in microbial growth on the surface of the studied materials was observed by means of scanning electron microscopy (SEM. The fluoride release capacity in ultrapure water for 14 days was analyzed by means of ion chromatography. RESULTS: The PLUS group presented the highest percentage of microbial inhibition and the most contamination-free surface. The FUJI group presented the best fluoride release capacity. CONCLUSIONS: The TransbondTM Plus Color Change was the one that presented the best general behavior considering the evaluated aspects.

  12. Liquid Fluoride Salt Experimentation Using a Small Natural Circulation Cell

    Energy Technology Data Exchange (ETDEWEB)

    Yoder Jr, Graydon L [ORNL; Heatherly, Dennis Wayne [ORNL; Williams, David F [ORNL; Elkassabgi, Yousri M. [Texas A& M University, Kingsville; Caja, Joseph [Electrochemical Systems, Inc.; Caja, Mario [ORNL; Jordan, John [Texas A& M University, Kingsville; Salinas, Roberto [Texas A& M University, Kingsville

    2014-04-01

    A small molten fluoride salt experiment has been constructed and tested to develop experimental techniques for application in liquid fluoride salt systems. There were five major objectives in developing this test apparatus: Allow visual observation of the salt during testing (how can lighting be introduced, how can pictures be taken, what can be seen) Determine if IR photography can be used to examine components submerged in the salt Determine if the experimental configuration provides salt velocity sufficient for collection of corrosion data for future experimentation Determine if a laser Doppler velocimeter can be used to quantify salt velocities. Acquire natural circulation heat transfer data in fluoride salt at temperatures up to 700oC All of these objectives were successfully achieved during testing with the exception of the fourth: acquiring velocity data using the laser Doppler velocimeter. This paper describes the experiment and experimental techniques used, and presents data taken during natural circulation testing.

  13. Oral microflora in preschool children attending a fluoride varnish program

    DEFF Research Database (Denmark)

    Anderson, Maria; Grindefjord, Margaret; Dahllöf, Göran

    2016-01-01

    hundred seven 3-year-old children were enrolled from a cohort of 3403 preschool children taking part in a community based oral health project. Two hundred sixty-three of them had attended caries-preventive program with semi-annual applications of a fluoride varnish since the age of 1 year (test group......BACKGROUND: To compare the oral microflora in preschool children attending a fluoride varnish program with a reference group receiving a standard oral health program without fluoride varnish applications. A second aim was to relate the microbial composition to the caries prevalence. METHODS: Five......) while 237 had received standard preventive care (reference group). Oral samples were collected with a sterile swab and analysed with checkerboard DNA-DNA hybridization using 12 pre-determined bacterial probes. Caries and background data were collected from clinical examinations and questionnaires...

  14. Texture evolution and infrared optical properties of praseodymium fluoride films

    Science.gov (United States)

    Su, Wei-Tao; Li, Bin; Liu, Ding-Quan; Zhang, Feng-Shan

    2007-10-01

    Praseodymium fluoride (PrF3) thin films were deposited on Ge(1 1 1) and zinc selenide substrates by molybdenum boat evaporation method. The crystal structures of thin film were characterized using XRD technique and the texture coefficients were calculated. The texture of praseodymium fluoride films changes from (3 0 2) to (1 1 0) texture when the temperature increases from 100 °C to 250 °C. Drastic tensile stress makes all the films covered by a network of fine cracks with width of nanometer-scale. The infrared transmission spectrum was measured to investigate the optical properties for all the films. The optical constants of praseodymium fluoride film were determined by using Lorentz oscillator model in the range from 8000 cm-1 to 500 cm-1.

  15. Promoting social welfare through oral health: New Jersey's fluoridation experience.

    Science.gov (United States)

    Mendoza, Roger Lee

    2009-01-01

    This study examines the contentious public health policy of treating community water with fluoride in the United States. The question for scholarly investigation is why water fluoridation has been unsuccessful in several parts of the United States relative to the rest. It addresses this question by looking into the processes of scientific discovery and information dissemination, benefits and risks of science-based health policy, related issues of provision and production, and spatial dimensions of policy development. The case method based on New Jersey's experience in public water fluoridation, was opted for this study. We find that policy debates, which are confined to single key issues, tend to breed binary choices and bipolar debates and result in policy stalemates. Consumer accessibility and desirability of merit goods thus become sharply conflicting social welfare values. They undermine the intent of science-based policies and often make alternative and second-best policies more practical to adopt.

  16. 76 FR 2383 - Proposed HHS Recommendation for Fluoride Concentration in Drinking Water for Prevention of Dental...

    Science.gov (United States)

    2011-01-13

    ... concentration of fluoride in drinking water is that concentration that provides the best balance of protection... were limited to studies ] conducted after the introduction of other sources of fluoride, especially... apparent (McDonagh MS, et al, 2000b; Griffin SO, et al, 2007). Fluoride works primarily to prevent...

  17. Professionally applied fluoride gel in low-caries 10.5-year-olds.

    NARCIS (Netherlands)

    Truin, G.J.; Hof, M.A. van 't

    2005-01-01

    The question has been raised whether low-caries children regularly using fluoride toothpaste will benefit from the professional application of additional fluoride gel. To investigate the caries-reducing effect of semi-annually-applied neutral 1% sodium fluoride gel, we carried out a double-blind ran

  18. A method for producing controlled fluoride release from an orthodontic bracket.

    Science.gov (United States)

    Li, Song; Hobson, Ross S; Bai, Yuxing; Yan, Zhuoqun; Carrick, Thomas E; McCabe, John F

    2007-12-01

    The aim of this study was to manufacture and test, in vitro, a novel modification to provide fluoride-releasing orthodontic brackets. Thirty-two orthodontic brackets were drilled to produce a recess (approximately 1.3 mm in diameter and 0.7 mm in depth) at the centre of the bracket base. Four materials, with and without the addition of sodium fluoride, a glass ionomer cement (Ketac Cem micro), a resin-modified glass ionomer cement (RMGIC; GC Fuji Ortho LC), a zinc phosphate (Zinc Cement Improved), and a resin (Transbond XT) were used to fill the recess in the bracket base. Fluoride release was measured daily during the first week and then weekly for 10 weeks. An ion chromatograph with suppressed conductivity was used for free fluoride ion determination. Statistical analysis to determine the amount of flouride release was undertaken using analysis of variance and Tukey's test. During the first 2 weeks, the resin group, with the addition of 38 per cent sodium fluoride added, released significantly more free fluoride (P < 0.05), but after 2 weeks the fluoride release markedly decreased. After 5 weeks, the RMGIC group, with 15 per cent added sodium fluoride, had significantly higher (P < 0.05) daily fluoride release than the other groups. The findings demonstrated that an appropriate fluoridated material can be used as a fluoride-releasing reservoir in a modified orthodontic bracket to enable it to release fluoride over the period of fixed appliance treatment.

  19. Environmental characteristics of regional groundwater in relation to fluoride poisoning in North China

    Science.gov (United States)

    Liu, Yong; Zhu, Wan Hua

    1991-07-01

    More and more data indicated that high- or low-fluoride-bearing drinking water led to endemic diseases in which fluoride poisoning was caused by high levels of fluoride (fluoride ion content >1.0 mg/I) in drinking water. Fluoride poisoning in North China is characterized by pathological changes of bones and teeth. Much attention has been devoted to the study of fluoride-bearing groundwater in North China because regionally groundwater has been the main source of water supply, and fluoride poisoning has developed to the extent that it affects human health seriously. Results from the studies in North China summarized in this article indicate that regional high-fluoride-bearing groundwater has a regular distribution corresponding with the development of endemic fluoride poisoning and has something to do with paleogeographic and paleoclimatic conditions, geology, and hydrogeology, especially with types of hydrogeochemistry, pH value of groundwater, degree of mineralization, and so forth. High-fluoride-bearing groundwater in relation to fluorosis occurs mainly in North China, and many effective measures have been taken to reduce the fluoride content in drinking water and to cure the disease after analyzing the distribution and environmental characteristics of high-fluoride-bearing groundwater.

  20. Total and free fluoride in toothpastes from some non-established market economy countries.

    NARCIS (Netherlands)

    Loveren, C. van; Moorer, W.R.; Buijs, M.J.; Palenstein Helderman, W.H. van

    2005-01-01

    In 101 fluoride toothpastes, bought in local shops in Burkina Faso (n = 3), China (n = 5), Myanmar (n = 22), Nepal (n = 19), Philippines (n = 13), Syria (n = 22), Togo (n = 7) and Vietnam (n = 10), the total and free ionisable fluoride concentrations were established. The total fluoride concentratio

  1. Dental fluorosis and urinary fluoride in 10-12 years old adolescents of Bushehr port

    Directory of Open Access Journals (Sweden)

    Giti Javan

    2006-02-01

    Full Text Available Background: Fluoride increases tooth resistance to dental caries, but mild toxicity due to excessive ingestion of fluoride can cause dental fluorosis. Drinking water naturally contains fluoride and is a major source of fluoride. In Bushehr port, drinking water is supplied from limestone springs with normal fluoride levels but dental fluorosis is observed. Methods: A total of 95 native school children (between the ages of 10-12 years old were randomly selected from four Bushehr port regions. Dental fluorosis, height and weight were examined. Probable attributing factors of dental fluorosis were also questioned. A 16 to 18 hours urinary fluoride concentration was measured with a fluoride ion selective electrode. Results: Dental fluorosis in four upper incisors was apparent in 52.6 % of the subjects. The urinary fluoride concentration was 2.18 mg/lit. Fluoride concentration in drinking water of schools ranged from 0.41 to 0.58 mg/lit. Forty percent of subjects were caries free. Conclusion: In spite of the normal range of fluoride concentration in the drinking water of Bushehr, dental fluorosis and urinary fluoride concentration are higher than the recommended ranges. Therefore, it is necessary to further investigate the amount and effects of fluoride ingestion in residents of Bushehr province.

  2. Fluoride removal from diluted solutions by Donnan dialysis using full factorial design

    Energy Technology Data Exchange (ETDEWEB)

    Boubakri, Ali; Helali, Nawel; Tlili, Mohamed; Amor, Mohamed Ben [Center of Researches and Water Technologies, Soliman (Turkey)

    2014-03-15

    Excessive fluoride concentration in potable water can lead to fluorosis of teeth and bones. In the present study, Donnan dialysis (DD) is applied for the removal of fluoride ions from diluted sodium fluoride solutions. A four factor two level (2{sup 4}) full factorial design was used to investigate the influence of different physico-chemical parameters on fluoride removal efficiency (Y{sub F}) and fluoride flux (J{sub F}) through anion exchange membrane. The statistical design determines factors which have the important effects on Donnan dialysis performance and studies all interactions among the considered parameters. The four significant factors were initial fluoride concentration, feed flow rate, temperature and agitation speed. The experimental results and statistical analysis show that the temperature and agitation speed have positive effects on fluoride removal efficiency and the initial fluoride concentration has a negative effect. In the case of fluoride flux, feed flow rate and initial concentration are the main effect and all factors have a positive effect. The interaction between studied parameters was not negligible on two responses. A maximum fluoride removal of 75.52% was obtained under optimum conditions and the highest value of fluoride flux obtained was 2.4 mg/cm{sup 2}·h. Empirical regression models were also obtained and used to predict the flux and the fluoride removal profiles with satisfactory results.

  3. Fluoride Consumption and Its Impact on Oral Health

    Science.gov (United States)

    Jiménez-Farfán, María Dolores; Hernández-Guerrero, Juan Carlos; Juárez-López, Lilia Adriana; Jacinto-Alemán, Luis Fernando; de la Fuente-Hernández, Javier

    2011-01-01

    Objective The purpose of this study was to evaluate caries and dental fluorosis among Mexican preschoolers and school-aged children in a non-endemic zone for fluorosis and to measure its biological indicators. Methods DMFT, DMFS, dmft, dmfs, and CDI indexes were applied. Fluoride urinary excretion and fluoride concentrations in home water, table salt, bottled water, bottled drinks, and toothpaste were determined. Results Schoolchildren presented fluorosis (CDI = 0.96) and dental caries (DMFT = 2.64 and DMFS = 3.97). Preschoolers presented dmft = 4.85 and dmfs = 8.80. DMFT and DMFS were lower in children with mild to moderate dental fluorosis (DF). Variable fluoride concentrations were found in the analyzed products (home water = 0.18–0.44 ppm F, table salt = 0–485 ppm F, bottled water = 0.18–0.47 ppm F, juices = 0.08–1.42 ppm F, nectars = 0.07–1.30 ppm F, bottled drinks = 0.10–1.70 ppm F, toothpaste = 0–2,053 ppm F). Mean daily fluoride excretion was 422 ± 176 μg/24 h for schoolchildren and 367 ± 150 μg/24 h for preschoolers. Conclusions Data from our study show that, despite values of excretion within an optimal fluoride intake range, the prevalence of caries was significant in both groups, and 60% of the 11- to 12-year-old children presented with dental fluorosis. In addition, variable fluoride concentrations in products frequently consumed by children were found. PMID:21318021

  4. Fluoride Consumption and Its Impact on Oral Health

    Directory of Open Access Journals (Sweden)

    Luis Fernando Jacinto-Alemán

    2011-01-01

    Full Text Available Objective. The purpose of this study was to evaluate caries and dental fluorosis among Mexican preschoolers and school-aged children in a non-endemic zone for fluorosis and to measure its biological indicators. Methods. DMFT, DMFS, dmft, dmfs, and CDI indexes were applied. Fluoride urinary excretion and fluoride concentrations in home water, table salt, bottled water, bottled drinks, and toothpaste were determined. Results. Schoolchildren presented fluorosis (CDI = 0.96 and dental caries (DMFT = 2.64 and DMFS = 3.97. Preschoolers presented dmft = 4.85 and dmfs = 8.80. DMFT and DMFS were lower in children with mild to moderate dental fluorosis (DF. Variable fluoride concentrations were found in the analyzed products (home water = 0.18–0.44 ppm F, table salt = 0–485 ppm F, bottled water = 0.18–0.47 ppm F, juices = 0.08–1.42 ppm F, nectars = 0.07–1.30 ppm F, bottled drinks = 0.10–1.70 ppm F, toothpaste = 0–2,053 ppm F. Mean daily fluoride excretion was 422 ± 176 µg/24 h for schoolchildren and 367 ± 150 µg/24 h for preschoolers. Conclusions. Data from our study show that, despite values of excretion within an optimal fluoride intake range, the prevalence of caries was significant in both groups, and 60% of the 11- to 12-year-old children presented with dental fluorosis. In addition, variable fluoride concentrations in products frequently consumed by children were found.

  5. Cytogenetic investigations on leucocytes of cattle intoxicated with fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Leonard, A.; Deknudt, G.; Decat, G.; Leonard, E.D.

    1977-04-01

    The sources of atmospheric fluoride include the burning of soft coal and the manufacturing of aluminium, steel, lead, copper, nickel, phosphate fertilizers, brick and pottery kilns. Cattle which grazed in the vicinity of a plant manufacturing enamel and which displayed signs of chronic fluoride poisoning such as osteosclerosis and mottled enamel or dental fluorosis were investigated for the presence of structural chromatid and chromosome aberrations. Venous blood was incubated for 48 h, and 100 cells were analyzed for each animal. No statistical difference in the incidence of such anomalies was observed between the controls and the intoxicated animals.

  6. Fluoride ion promoted deprotection and transesterification in nucleotide triesters.

    Science.gov (United States)

    Ogilvie, K K; Beaucage, S L

    1979-10-10

    Tetrabutylammonium fluoride will remove phenyl, trichloroethyl and cyanoethyl groups from nucleotides. In addition to the desired nucleotide products other results including chain cleavage, phosphofluoridates and cyanoethylated thymidine units may be obtained depending on the conditions used. Fluoride ion has been used to successfully exchange phenyl and trichloroethyl groups for methyl, ethyl and butyl groups in nucleotide triesters. This represents a rapid high yield route to a variety of phosphate esters. The synthesis of a novel nucleotide analogue in which two chains are bridged through their phosphates is described.

  7. Dutch fluoride concentration in perspective; Nederlandse fluoridenconcentratie in perspectief

    Energy Technology Data Exchange (ETDEWEB)

    Hoekstra, B. [Tauw, Deventer (Netherlands); Van Dijk, C. [Wageningen UR, Wageningen (Netherlands); Van Doorn, W. [Royal Haskoning, Nijmegen (Netherlands)

    2009-08-15

    Recent jurisprudence shows that in grant permitting the non legal aspects of air quality requirements for fluorides should be expressly taken into account. During the decision-making process careful considerations should be made about emissions, background concentrations and possible effects of fluorides [mk]. [Dutch] Uit recente jurisprudentie is gebleken dat bij vergunningverlening nadrukkelijk rekening moet worden gehouden met de niet-wettelijke luchtkwaliteitseisen voor fluoriden. Bij besluitvorming dient een zorgvuldige afweging en motivering plaats te vinden over emissies, achtergrondconcentraties en mogelijke effecten van fluoriden.

  8. Perspectives in the effective use of fluoride in Asia

    DEFF Research Database (Denmark)

    Petersen, P E; Phantumvanit, P

    2012-01-01

    services, in particular, exposure to disease prevention programs (Petersen, 2003, 2008a). Benefits of fluoride for caries prevention have been substantiated in many countries (Petersen and Lennon, 2004; Jones et al., 2005). In the second half of the 20th century, this focus shifted to the development...... al., 2003; Australian Government, 2007). The Asian workshop held in Phan-Nga, Thailand, during March 22-24, 2011, aimed to discuss current information on fluoride and dental caries, as well as to try identifying barriers and opportunities that countries of Asia may have for implementing such programs...

  9. Stimulated Raman scattering in soft glass fluoride fibers

    DEFF Research Database (Denmark)

    Petersen, Christian; Dupont, Sune Vestergaard Lund; Agger, Christian;

    2011-01-01

    We have measured the absolute Raman gain spectrum in short fluoride soft glass fibers with a pump wavelength of 1650 nm. We found a peak gain of gR=4.0±2×10−14 m W−1.......We have measured the absolute Raman gain spectrum in short fluoride soft glass fibers with a pump wavelength of 1650 nm. We found a peak gain of gR=4.0±2×10−14 m W−1....

  10. Stimulated Raman scattering in soft glass fluoride fibers

    DEFF Research Database (Denmark)

    Petersen, Christian; Dupont, Sune; Agger, Christian;

    2011-01-01

    We have measured the absolute Raman gain spectrum in short fluoride soft glass fibers with a pump wavelength of 1650nm. We found a peak gain of gR ¼ 4:0 2 × 10−14mW−1.......We have measured the absolute Raman gain spectrum in short fluoride soft glass fibers with a pump wavelength of 1650nm. We found a peak gain of gR ¼ 4:0 2 × 10−14mW−1....

  11. THE USE OF FLUORIDE CONTAINING MINERAL WATER IN WORT PRODUCTION

    OpenAIRE

    Gunka Yonkova; Vanja Zhivkova; Andriana Surleva

    2011-01-01

    The present work aims to study the quality of wort produced using fluoride containing mineral water. The results show that the mineral water has a negative impact on the enzymatic destruction of starch, proteins, color intensity and pH of the wort. The changes of pH during mashing process using tap and mineral water was studied. The lower acidity of wort obtained using mineral water didn’t change during the brewing process. The fluoride content of beer is lower than 5 mg.L-1 when wort is prod...

  12. Recovery of protactinium from molten fluoride nuclear fuel compositions

    Science.gov (United States)

    Baes, C.F. Jr.; Bamberger, C.; Ross, R.G.

    1973-12-25

    A method is provided for separating protactinium from a molten fluonlde salt composition consisting essentially of at least one alkali and alkaline earth metal fluoride and at least one soluble fluoride of uranium or thorium which comprises oxidizing the protactinium in said composition to the + 5 oxidation state and contacting said composition with an oxide selected from the group consisting of an alkali metal oxide, an alkaline earth oxide, thorium oxide, and uranium oxide, and thereafter isolating the resultant insoluble protactinium oxide product from said composition. (Official Gazette)

  13. EFFECT OF DAILY FLUORIDE EXPOSURE ON FLUORIDE RELEASE BY HIGH STRENGTH GLASS IONOMER RESTORATIVE MATERIAL USED WITH ATRAUMATIC RESTORATIVE TECHNIQUE: AN IN VITRO STUDY

    Directory of Open Access Journals (Sweden)

    Hegde Mithra N.

    2012-04-01

    Full Text Available An in-vitro study was done to evaluate the effect of fluoride exposure, fluoride release and recharging capability by High strength Glass Ionomer restorative material used with Atraumatic restorative technique. 20 specimens were divided into four groups of five specimens each. The results showed that High strength Glass ionomer cements (Fuji IX release fluoride, the greatest release takes place between 24- 48 hours.High viscous High Strength Glass ionomer cements have the ability to recharge by external sources like fluoridated dentifrices and varnishes and thus acts as a fluoride reservoir. The recommendation that individuals with a high caries rate and glass ionomer restoration should have fluoride treatment with dentifrice and varnish seems appropriate.

  14. The mechanism for production of beryllium fluoride from the product of ammonium fluoride processing of beryllium- containing raw material

    Science.gov (United States)

    Kraydenko, R. I.; Dyachenko, A. N.; Malyutin, L. N.; Petlin, I. V.

    2016-06-01

    The technique of fluorite-phenacite-bertrandite ores from Russian Ermakovskoe deposit processing by ammonium bifluoride is described. To determine the temperature mode and the thermal dissociation mechanism of ammonium tetrafluoroberyllate (the product of ammonium-fluoride leaching of the ore) the TG/DTA have been carried out. By IR spectroscopy and XRD the semi-products of ammonium tetrafluoroberyllate thermal dissociation have been identified. The hygroscopic low-temperature beryllium fluoride forms higher than 380°C. The less hydroscopic form of BeF2 have been produced at 600°C.

  15. Effective use of fluorides for the prevention of dental caries in the 21st century

    DEFF Research Database (Denmark)

    Petersen, Poul Erik; Lennon, Michael A

    2004-01-01

    Despite great improvements in the oral health of populations across the world, problems still persist particularly among poor and disadvantaged groups in both developed and developing countries. According to the World Oral Health Report 2003, dental caries remains a major public health problem......, due to changing living conditions and dietary habits, and inadequate exposure to fluorides. Research on the oral health effects of fluoride started around 100 years ago; the focus has been on the link between water and fluorides and dental caries and fluorosis, topical fluoride applications, fluoride...

  16. Sustainable approach for recycling waste lamb and chicken bones for fluoride removal from water followed by reusing fluoride-bearing waste in concrete.

    Science.gov (United States)

    Ismail, Zainab Z; AbdelKareem, Hala N

    2015-11-01

    Sustainable management of waste materials is an attractive approach for modern societies. In this study, recycling of raw waste lamb and chicken bones for defluoridation of water has been estimated. The effects of several experimental parameters including contact time, pH, bone dose, fluoride initial concentration, bone grains size, agitation rate, and the effect of co-existing anions in actual samples of wastewater were studied for fluoride removal from aqueous solutions. Results indicated excellent fluoride removal efficiency up to 99.4% and 99.8% using lamb and chicken bones, respectively at fluoride initial concentration of 10 mg F/L and 120 min contact time. Maximum fluoride uptake was obtained at neutral pH range 6-7. Fluoride removal kinetic was well described by the pseudo-second order kinetic model. Both, Langmuir and Freundlich isotherm models could fit the experimental data well with correlation coefficient values >0.99 suggesting favorable conditions of the process. Furthermore, for complete sustainable management of waste bones, the resulted fluoride-bearing sludge was reused in concrete mixes to partially replace sand. Tests of the mechanical properties of fluoride sludge-modified concrete mixes indicated a potential environmentally friendly approach to dispose fluoride sludge in concrete and simultaneously enhance concrete properties.

  17. Effect of fluoridated water on intelligence in 10-12-year-old school children

    Science.gov (United States)

    Aravind, A.; Dhanya, R. S.; Narayan, Ajay; Sam, George; Adarsh, V. J.; Kiran, M.

    2016-01-01

    Aim: The aim of the present study was to evaluate the relationship of drinking water fluoride levels with children's intelligence quotient (IQ). Materials and Methods: Water was collected from initially identified endemic fluoride regions according to the geological research of Government of India. Fluoride concentration of the water was assessed by utilizing fluoride ion selective electrode, Orion 9609BN, and categorized on the basis of fluoride concentration into low, medium, and high-fluoride regions, i.e., Virajpet (low fluoride level 3 ppm). Government school from all three villages were selected randomly and IQ levels were assessed by using Raven's Standard Progressive Matrices. This test was conducted on each child in the study sample. Results: A significant inverse relationship was found between the fluoride concentration in drinking water and IQ (r value = −0.204; P < 0.000). It was observed that IQ level was negatively correlated with fluoride concentration in drinking water. Conclusion: It is concluded that IQ level was negatively correlated with fluoride level in drinking water. Factors that might affect children's IQ need to be considered, and it is necessary to devise solutions for preventing the harmful effects of excessive intake of fluoride ion to the body. PMID:28217543

  18. Fluoride and abrasive content in commonly used dentifrices on the Kenyan market.

    Science.gov (United States)

    Mwaniki, D L; Opinya, G N

    1993-05-01

    About one decade ago, a heated debate on the appropriateness of fluoride dentifrices in Kenya culminated in the introduction of no-fluoride brands. Analysis of dentifrices that were available on the market in 1989/1990 confirmed two distinctly different categories, the fluoride and the low or no-fluoride types. Among the former, the mean ionic fluoride concentration ranged between 0.4 and 1.36 mg/g while the total fluoride concentration ranged between 1.15 and 114.68 mg/g. The low or no-fluoride dentifrices had less than 0.03 mg/g ionic fluoride and less than 2.14 mg/g total fluoride. The mean abrasive (powder) content ranged between 26.5 g% and 78.5 g%. The gel categories had markedly lower powder values than the pastes. The ash values of the powders ranged between 15.8 g% and 85 g% and did not have an obvious relationship with the powder content. Despite the obvious risk of increasing exposure to excessive fluoride among children, presently, the situation has reverted to the pre-debate time. Given the ubiquitous nature of ingestable fluoride in the region, provision of guidelines and guidance on the sale of dentifrices by the government and consumer organisations, and increased accountability of the manufacturers are recommended.

  19. [Ten years of external control over water fluoridation in Chapecó, Santa Catarina State, Brazil].

    Science.gov (United States)

    Panizzi, Mirvaine; Peres, Marco Aurélio

    2008-09-01

    This study aimed to analyze fluoride concentration in the public water supply in Chapecó, Santa Catarina State, Brazil, from 1995 to 2005 and to assess the effectiveness of a fluoridation quality intervention in 2003. A total of 989 water samples were analyzed. Fluoride concentrations were classified according to three different criteria used in Brazil. The city conducted a political and legal intervention in 2003. The Prais-Winsten procedure was used to evaluate the fluoride concentrations over time. In the ten years, the water fluoridation system showed 46%, 32%, and 43% of adequate samples, depending on the criterion. Prior to the municipal intervention, the proportion of adequate samples was 40%, 26%, and 36%, increasing to 63%, 49%, and 61% after the intervention, according to the three criteria. Fluoride concentration improved after the municipal intervention. On-going surveillance is recommended, including water fluoridation, dental caries, and dental fluorosis.

  20. The use of topical fluoride to prevent or reverse dental caries.

    Science.gov (United States)

    Jacobsen, Peter; Young, Douglas

    2003-01-01

    Topical fluoride has been the main stay of caries prevention for many decades. There are several mechanisms which make it beneficial including inhibiting demineralization, enhancing remineralization, and inhibiting bacterial growth. Topical fluoride is available in many different forms. The concentrations of various fluoride preparations range from 225 parts per million (ppm) fluoride in over-the-counter oral rinses to 22,600 ppm in the fluoride varnishes. The clinician must decide which type of topical preparation is best suited for their patient. Patients with high caries risk may benefit from prescription strength fluorides (along with the other chemical and dietary therapies described in this issue of Special Care in Dentistry). The application of fluoride varnish is an excellent topical form for those patients who have access to dental care and for whom it is difficult to comply with the use of other topical forms.

  1. Investigating the Intercalation Chemistry of Alkali Ions in Fluoride Perovskites

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Tanghong; Chen, Wei; Cheng, Lei; Bayliss, Ryan D.; Lin, Feng; Plews, Michael R.; Nordlund, Dennis; Doeff, Marca M.; Persson, Kristin A.; Cabana, Jordi

    2017-02-07

    Reversible intercalation reactions provide the basis for modern battery electrodes. Despite decades of exploration of electrode materials, the potential for materials in the nonoxide chemical space with regards to intercalation chemistry is vast and rather untested. Transition metal fluorides stand out as an obvious target. To this end, we report herein a new family of iron fluoride-based perovskite cathode materials AxK1–xFeF3 (A = Li, Na). By starting with KFeF3, approximately 75% of K+ ions were subsequently replaced by Li+ and Na+ through electrochemical means. X-ray diffraction and Fe X-ray absorption spectroscopy confirmed the existence of intercalation of alkali metal ions in the perovskite structure, which is associated with the Fe2+/3+ redox couple. A computational study by density functional theory showed agreement with the structural and electrochemical data obtained experimentally, which suggested the possibility of fluoride-based materials as potential intercalation electrodes. This study increases our understanding of the intercalation chemistry of ternary fluorides, which could inform efforts toward the exploration of new electrode materials.

  2. Spectroscopy and dynamics of rare earth doped fluorides

    NARCIS (Netherlands)

    Ebens, Willem Omco

    1995-01-01

    The defect structure of RE doped Fluorides has been studied along with the conductivity properties, using a variety of techniques, both experimental and theoretical. Two systems have been studied in detail, which represent two kinds of defect states for RE doped SrFr. The system SrFr:CeF, has been t

  3. Efficacy of xylitol and fluoride mouthrinses on salivary mutans streptococci

    Institute of Scientific and Technical Information of China (English)

    Sroisiri Thaweboon; Yuwadee Asvanund; Kesinee Charoenchaikorn

    2011-01-01

    To evaluate the level of salivary Mutans streptococci (MS) after rinsing with xylitol, fluoride, and a combination of xylitol and fluoride solutions, compared with distilled water. Methods: Eighty healthy 8-9 years old subjects with high level of MS (> 105 CFU/mL) were equally divided into 4 groups. Subjects rinsed their mouths for 1 min with 10 mL of 0.05% (w/v) sodium fluoride (NaF), 12.5% (w/v) xylitol or 0.05% (w/v) NaF + 12.5% (w/v) xylitol 3 times daily over 10 weeks. Distilled water rinsed group served as a control. Paraffin-stimulated whole saliva samples were collected at baseline, 5 weeks, and 10 weeks after rinsing to determine the level of salivary MS by culturing on Mitis Salivarius Bacitracin agar. The statistical significance was calculated by Kruskal Wallis, Mann Whitney U, and Wilcoxon signed-rank tests at a significant level ofP< 0.05. Results: Significant reductions in MS count were observed in subjects using 0.05% NaF+ 12.5% xylitol over other groups within 5 weeks and after 10 weeks and 12.5% xylitol alone after 10 weeks compared with baseline. Conclusions: The present study provides evidence for the inhibitory effect of xylitol, used in combination with fluoride, delivered in the form of mouthrinse, on salivary MS in the group of schoolchildren.

  4. Magnetic frustration in ferric fluorides investigated by Moessbauer spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Greneche, J.-M. [UPRESA CNRS 6087, Faculte des Sciences, Universite du Maine, Laboratoire de Physique de l' Etat Condense (France)

    1999-11-15

    The origin of magnetic frustration in antiferromagnetic ionic systems is discussed in terms first of cationic topology and then of competing superexchange and supersuperexchange interactions. Some selected examples based on ferric fluorides and oxyfluorides are presented to illustrate both the origins of magnetic frustration and the contribution of zero-field and in-field Moessbauer experiments.

  5. Caries prevention with fluoride toothpaste in children: an update

    DEFF Research Database (Denmark)

    Twetman, S

    2009-01-01

    AIM: The aim was to examine recent literature and review the caries-preventive effect of fluoride toothpaste in children. METHODS: Based on three comprehensive systematic reviews published in 2003, a broad search of the PubMed and Cochrane library databases was conducted for papers published 2002...... fluorosis in low-caries communities but not in socially deprived high-caries populations. CONCLUSIONS: The results reinforced the outstanding role of fluoride toothpaste as an effective caries preventive measure in children.......AIM: The aim was to examine recent literature and review the caries-preventive effect of fluoride toothpaste in children. METHODS: Based on three comprehensive systematic reviews published in 2003, a broad search of the PubMed and Cochrane library databases was conducted for papers published 2002...... of the study. The targeted papers were critically assessed concerning design, methodology and performance according to a pre-determined checklist. RESULTS: The initial search revealed 179 papers of which 15 met the inclusion criteria. There was strong evidence that daily use of fluoride toothpaste has...

  6. The dissolution of kaolin by acidic fluoride wastes

    DEFF Research Database (Denmark)

    Kau, P. M. H.; Smith, D. W.; Binning, Philip John

    1997-01-01

    The potential use of kaolin as a lining material for the storage of acidic and acidic fluoride wastes is investigated, No significant changes are observed gravimetrically or structurally for kaolin soaked under acidic conditions down to pH 2 for periods up to 90 days, Some release of aluminium...

  7. Removal of fluoride contamination in water by three aquatic plants.

    Science.gov (United States)

    Karmakar, Sukalpa; Mukherjee, Joydeep; Mukherjee, Somnath

    2016-01-01

    Phytoremediation, popularly known as 'green technology' has been employed in the present investigation to examine the potential of fluoride removal from water by some aquatic plants. Fluoride contamination in drinking water is very much prevalent in different parts of the world including India. Batch studies were conducted using some aquatic plants e.g., Pistia stratiotes, Eichhornia crassipes, and Spirodela polyrhiza which profusely grow in natural water bodies. The experimental data exhibited that all the above three aquatic floating macrophytes could remove fluoride to some relative degree of efficiency corresponding to initial concentration of fluoride 3, 5, 10, 20 mg/l after 10 days exposure time. Result showed that at lower concentration level i.e., 3 mg/L removal efficiency of Pistia stratiotes (19.87%) and Spirodela polyrhiza (19.23%) was found to be better as compared to Eichhornia crassipes (12.71%). Some of the physiological stress induced parameters such as chlorophyll a, chlorophyll b, total chlorophyll, carotenoid, total protein, catalase, and peroxidase were also studied to explore relative damage within the cell. A marginal stress was imparted among all the plants for lower concentration values (3 mg/L), whereas at 20 mg/l, maximum damage was observed.

  8. Slow-release fluoride devices: a literature review

    Directory of Open Access Journals (Sweden)

    Juliano Pelim Pessan

    2008-08-01

    Full Text Available Although the prevalence of caries has decreased dramatically over the past decades, it has become a polarised disease, with most of subjects presenting low caries levels and few individuals accounting for most of the caries affected surfaces. Thus it become evident for the need of clinical approaches directed at these high-risk patients, in order to overcome problems related to compliance and low attendance at dental care centres. Slow-release fluoride devices were developed based on the inverse relationship existing between intra-oral fluoride levels and dental caries experience. The two main types of slow-release devices - copolymer membrane type and glass bead - are addressed in the present review. A substantial number of studies have demonstrated that these devices are effective in raising intra-oral F concentrations at levels able to reduce enamel solubility, resulting in a caries-protective effect. Studies in animals and humans demonstrated that the use of these devices was able to also protect the occlusal surfaces, not normally protected by conventional fluoride regimens. However, retention rates have been shown to be the main problem related to these devices and still requires further improvements. Although the results of these studies are very promising, further randomised clinical trials are needed in order to validate the use of these devices in clinical practice. The concept of continuously providing low levels of intra-oral fluoride has great potential for caries prevention in high caries-risk groups.

  9. Measuring Bone Metabolism with Fluoride PET: Methodological Considerations.

    Science.gov (United States)

    Apostolova, Ivayla; Brenner, Winfried

    2010-07-01

    In recent years the more widespread availability of PET systems and the development of hybrid PET/computed tomography (CT) imaging, allowing improved morphologic characterization of sites with increased tracer uptake, have improved the accuracy of diagnosis and strengthened the role of 18F-fluoride PET for quantitative assessment of bone pathology. This article reviews the role of 18F-fluoride PET in the skeleton, with a focus on (1) the underlying physiologic and pathophysiological processes of different conditions of bone metabolism and (2) methodological aspects of quantitative measurement of 18F-fluoride kinetics. Recent comparative studies have demonstrated that 18F-fluoride PET and, to an even greater extent, PET/CT are more accurate than 99mTc-bisphosphonate single-photon emission CT for the identification of malignant and benign lesions of the skeleton. Quantitative 18F-flouride PET has been shown valuable for direct non-invasive assessment of bone metabolism and monitoring response to therapy.

  10. Removal of Fluoride from Aqueous Solutions Using Chitosan Cryogels

    Directory of Open Access Journals (Sweden)

    Anete Jessica Arcos-Arévalo

    2016-01-01

    Full Text Available In this study, crosslinked chitosan cryogels (QE and chitosan’s cryogels modified with iron (QEFe were synthesized. They were characterized by BET, PZC, FTIR, and XPS spectroscopies. Results show a specific surface area of 36.67 and 29.17 m2g−1 and 7.0 and 6.1 of PZC for the cryogels QE and QEFe, respectively. FTIR results show the characteristic bands of amino and hydroxyl groups, while in the XPS analysis, interactions between iron and oxygen with fluorine were observed. The removal of fluoride at temperatures of 303, 313, and 323 K in cryogels was tested. The Ho model is the best fit for the experimental data, suggesting that there is a chemisorption process involved in the removal of fluoride. The Langmuir-Freundlich model is the best to represent the behavior of the cryogels, and it is used to sorbents with heterogeneous surfaces. A maximum fluoride adsorption capacity of 280 and 295 mg F−/g for QE and QEFe, respectively, at 303 K was obtained, showing that the removal of fluoride is favored by the iron incorporated in the polymer matrix of the cryogels. The thermodynamic parameters were obtained for both cryogels, where the values of ΔH° and ΔG° indicate that both systems are endothermic and nonspontaneous.

  11. Een ionchromatografische methode voor de bepaling van fluoride in water

    NARCIS (Netherlands)

    Beld WA van den; Cleven RFMJ; Neele J; LAC

    1998-01-01

    Dit rapport bevat resultaten van het onderzoek naar het ontwikkelen van een geautomatiseerde ionchromatografische methode voor de bepaling van fluoride, acetaat en formiaat in diverse waterige milieu's. Het onderzoek heeft geresulteerd in een betrouwbare, selectieve en gevoelige methode vo

  12. Elevated fluoride products enhance remineralization of advanced enamel lesions.

    Science.gov (United States)

    ten Cate, J M; Buijs, M J; Miller, C Chaussain; Exterkate, R A M

    2008-10-01

    Caries prevention might benefit from the use of toothpastes containing over 1500 ppm F. With few clinical studies available, the aim of this pH-cycling study was to investigate the dose response between 0 and 5000 ppm F of de- and remineralization of advanced (> 150 microm) enamel lesions. Treatments included sodium and amine fluoride, and a fluoride-free control. Mineral uptake and loss were assessed from solution calcium changes and microradiographs. Treatments with 5000 ppm F both significantly enhanced remineralization and inhibited demineralization when compared with treatments with 1500 ppm F. Slight differences in favor of amine fluoride over sodium fluoride were observed. The ratio of de- over remineralization rates decreased from 13.8 to 2.1 in the range 0 to 5000 ppm F. As much as 71 (6)% of the remineralized mineral was calculated to be resistant to dissolution during subsequent demineralization periods. With 5000-ppm-F treatments, more demineralizing episodes per day (10 vs. 2 for placebo) would still be repaired by remineralization.

  13. Hydrogen Fluoride in High-mass Star-forming Regions

    NARCIS (Netherlands)

    Emprechtinger, M.; Monje, R. R.; van der Tak, F. F. S.; van der Wiel, M. H. D.; Lis, D. C.; Neufeld, D.; Phillips, T. G.; Ceccarelli, C.

    2012-01-01

    Hydrogen fluoride (HF) has been established to be an excellent tracer of molecular hydrogen in diffuse clouds. In denser environments, however, the HF abundance has been shown to be approximately two orders of magnitude lower. We present Herschel/HIFI observations of HF J = 1-0 toward two high-mass

  14. Bioethical considerations about water fluoridation: a critical review.

    Directory of Open Access Journals (Sweden)

    María Elisa Quinteros

    2016-08-01

    Full Text Available Dental caries is one of the oral pathologies with greater burden of disease in the Chilean population. Fluoridation of drinking water has been used as a caries prevention strategy. However, its application as a public policy has been questioned since its implementation. The aim of this article is to analyze whether fluoridation of drinking water is a justified measure in reducing the incidence and prevalence of caries from the perspective of bioethics, taking into account the current evidence on its effectiveness. The arguments reviewed are based on the belief that water fluoridation is effective and, in general terms, ethically acceptable. A recent systematic review concludes that there is not enough evidence to support fluoridation as a public policy. There is a gap of knowledge that ought to be closed so that public health authorities can assess the significance of the intervention and make a democratic decision on its continuation or suspension based on scientific evidence. This decision should be informed and disseminated within the community.

  15. Reversible Intercalation of Fluoride-Anion Receptor Complexes in Graphite

    Science.gov (United States)

    West, William C.; Whitacre, Jay F.; Leifer, Nicole; Greenbaum, Steve; Smart, Marshall; Bugga, Ratnakumar; Blanco, Mario; Narayanan, S. R.

    2007-01-01

    We have demonstrated a route to reversibly intercalate fluoride-anion receptor complexes in graphite via a nonaqueous electrochemical process. This approach may find application for a rechargeable lithium-fluoride dual-ion intercalating battery with high specific energy. The cell chemistry presented here uses graphite cathodes with LiF dissolved in a nonaqueous solvent through the aid of anion receptors. Cells have been demonstrated with reversible cathode specific capacity of approximately 80 mAh/g at discharge plateaus of upward of 4.8 V, with graphite staging of the intercalant observed via in situ synchrotron X-ray diffraction during charging. Electrochemical impedance spectroscopy and B-11 nuclear magnetic resonance studies suggest that cointercalation of the anion receptor with the fluoride occurs during charging, which likely limits the cathode specific capacity. The anion receptor type dictates the extent of graphite fluorination, and must be further optimized to realize high theoretical fluorination levels. To find these optimal anion receptors, we have designed an ab initio calculations-based scheme aimed at identifying receptors with favorable fluoride binding and release properties.

  16. Effects of amine fluoride on biofilm growth and salivary pellicles

    NARCIS (Netherlands)

    Van der Mei, HC; Engels, E; de Vries, Jacob; Busscher, HJ

    2008-01-01

    The amine fluoride (AmF) N'-octadecyltrimethylendiamine-N, N,N'-tris(2-ethanol)-dihydrofluoride is a cationic antimicrobial which can have beneficial effects on plaque formation. Here, we determine changes in pellicle and bacterial cell surface properties of the strains Actinomyces naeslundii HM1, S

  17. Effect of fluoride and chlorhexidine digluconate mouthrinses on plaque biofilms

    DEFF Research Database (Denmark)

    Rabe, Per; Twetman, Svante; Kinnby, Bertil;

    2015-01-01

    in the pre-molar region were worn by three subjects for 7 days. Control discs were removed before subjects rinsed with 0.1% chlorhexidine digluconate (CHX) or 0.2% sodium fluoride (NaF) for 1 minute. Biofilms were stained with Baclight Live/Dead and z-stacks of images created using confocal scanning laser...

  18. THE USE OF FLUORIDE CONTAINING MINERAL WATER IN WORT PRODUCTION

    Directory of Open Access Journals (Sweden)

    Gunka Yonkova

    2011-12-01

    Full Text Available The present work aims to study the quality of wort produced using fluoride containing mineral water. The results show that the mineral water has a negative impact on the enzymatic destruction of starch, proteins, color intensity and pH of the wort. The changes of pH during mashing process using tap and mineral water was studied. The lower acidity of wort obtained using mineral water didn’t change during the brewing process. The fluoride content of beer is lower than 5 mg.L-1 when wort is produced using mineral and tap water in 1:1 ratio and citric acid for pH correction. At the same time, the final degree of fermentation, α-amine nitrogen content and the intensity of color of produced wort are close to the control sample. The changes in fluoride ion concentration are monitored using ion-selective potentiometry. The fluoride content is decreased from 5.7 to 4.75 mg.L-1, the most intense change is observed during the mashing process.

  19. [(18)F]-Sodium fluoride uptake in Takayasu arteritis

    NARCIS (Netherlands)

    Alexanderson-Rosas, E; Monroy-Gonzalez, A G; Juarez-Orozco, Luis Eduardo; Martinez-Aguilar, M M; Estrada, E; Soldevilla, I; Garcia-Pérez, O; Soto-Lopez, M E

    2016-01-01

    BACKGROUND: While (18)F-fluorodeoxyglucose and (18)F-sodium fluoride with positron emission tomography relate with inflammation and calcification, their role in the assessment of patients with Takayasu arteritis has not yet been studied. METHODS: We present 5 patients with suspected active metabolic

  20. Electrospinning induced ferroelectricity in poly(vinylidene fluoride) fibers

    Science.gov (United States)

    Baji, Avinash; Mai, Yiu-Wing; Li, Qian; Liu, Yun

    2011-08-01

    Poly(vinylidene fluoride) (PVDF) fibers with diameters ranging from 70 to 400 nm are produced by electrospinning and the effect of fiber size on the ferroelectric β-crystalline phase is determined. Domain switching and associated ferro-/piezo-electric properties of the electrospun PVDF fibers were also determined. The fibers showed well-defined ferroelectric and piezoelectric properties.

  1. Mortality and cancer morbidity after heavy occupational fluoride exposure

    DEFF Research Database (Denmark)

    Grandjean, P; Juel, K; Jensen, Ole Møller

    1985-01-01

    A cohort of 431 male cryolite workers employed for at least six months between 1924 and 1961 was identified from personnel records at the Copenhagen cryolite factory. During this period, heavy fluoride exposure resulted in at least 74 cases of skeletal fluorosis. All workmen in the cohort were...

  2. Current concepts on the theories of the mechanism of action of fluoride.

    Science.gov (United States)

    ten Cate, J M

    1999-12-01

    The caries-preventive effect of fluoride is mainly attributed to the effects on demineralization/remineralization at the tooth oral fluids interface. Sub ppm levels of fluoride in saliva are effective in shifting the balance from demineralization, leading to caries, to remineralization. This is attributed to the fluoride-enhanced precipitation of calcium phosphates, and the formation of fluorhydroxyapatite in the dental tissues. Low fluoride levels are found in saliva after toothbrushing with fluoride containing dentifrices. Similar concentrations are ineffective in interfering with processes of growth and metabolism of bacteria, and also do not result in a significantly reduced dissolution of tooth mineral as a result of (firmly bound) fluoride incorporation. Comparative studies of fluoride efficacy have shown that higher concentrations in solution are needed in pH-cycling studies of dentine than in enamel to maintain the mineral balance or to induce remineralization. This is attributed to the greater solubility of the dentine and the smaller size of the dentine crystallites compared to enamel. Fluoride slow-release devices, in the form of fluoride-releasing restorative materials, may serve to increase the fluoride levels in saliva and plaque to levels at which caries can be prevented, also in high-risk patients. Research questions for the next millennium and future perspectives for fluoride applications should be found in the retention and slow release of fluoride after various combinations of fluoride treatment, the combination of fluoride and anti-microbial treatment, the individualization of caries prevention, and the combination of preventive schemes with new developments in caries diagnosis.

  3. Fluoride inhibition of Klebsiella aerogenes urease: mechanistic implications of a pseudo-uncompetitive, slow-binding inhibitor.

    Science.gov (United States)

    Todd, M J; Hausinger, R P

    2000-05-09

    Klebsiella aerogenes urease uses a dinuclear nickel active site to catalyze the hydrolysis of urea. Here, we describe the steady-state and pre-steady-state kinetics of urease inhibition by fluoride. Urease is slowly inhibited by fluoride in both the presence and absence of substrate. Steady-state rate studies yield parallel double-reciprocal plots; however, we show that fluoride interaction with urease is not compatible with classical uncompetitive inhibition. Rather, we propose that fluoride binds to an enzyme state (E) that is in equilibrium with resting enzyme (E) and produced during catalysis. Fluoride binding rates are directly proportional to inhibitor concentration. Substrate reduces both the rate of fluoride binding to urease and the rate of fluoride dissociation from the complex, consistent with urea binding to E and E.F in addition to E. Fluoride inhibition is pH-dependent due to a protonation event linked to fluoride dissociation. Fluoride binding is pH-independent, suggesting that fluoride anion, not HF, is the actual inhibitor. We assess the kinetic results in terms of the known protein crystal structure and evaluate possible molecular interpretations for the structure of the E state, the site of fluoride binding, and the factors associated with fluoride release. Finally, we note that the apparent uncompetitive inhibition by fluoride as reported for several other metalloenzymes may need to be reinterpreted in terms of fluoride interaction with the corresponding E states.

  4. Effect of fluoride-free and fluoridated carbamide peroxide gels on the hardness and surface roughness of aesthetic restorative materials

    Directory of Open Access Journals (Sweden)

    Homayoon Alaghehmand

    2013-01-01

    Full Text Available Background: Bleaching products may show some side effects on soft and hard tissues and restorative materials in the oral cavity. This study evaluated the effect of carbamide peroxide gel with and without fluoride ions on the microhardness and surface roughness of tooth-colored restorative materials. Materials and Methods: In this in-vitro study, 76 cubic specimens (4 mm 3 × 4 mm 3 × 3 mm 3 were fabricated from 4 aesthetic A3-shade restorative materials. These materials consisted of two composite resins and two glass ionomers. The specimens made from each material were treated with the following surface treatments: 1. Control group: The specimens were not bleached and were stored in normal saline. Group 2. Fluoridated 20% carbamide peroxide gel, treated 3 h a day for 4 weeks. Group 3. Treated 1 h a day with fluoride-less 22% carbamide peroxide for two weeks. From each group, three other specimens were selected to be evaluated in terms of changes in surface roughness, under scanning electron microscopy (SEM. Results: In this study, fluoridated 20% carbamide peroxide gel increased the microhardness of the four aesthetic restorative materials. The fluoride-free carbamide peroxide 22% reduced the microhardness of the four used materials, which this change was significant for Vitremer and Amelogen. SEM analyses showed changes in surface roughness of glass ionomer specimens. Conclusion: The effect of bleaching on the microhardness of restorative materials is material dependent. Before the application of bleaching systems on the glass ionomer materials, the application of a protective barrier should be considered.

  5. Protective effect of ascorbic acid and Ginkgo biloba against learning and memory deficits caused by fluoride.

    Science.gov (United States)

    Jetti, Raghu; Raghuveer, C V; Mallikarjuna, Rao C

    2016-01-01

    Fluoride is present in the ground water, World Health Organization permitted level of fluoride in the ground water is 0.5 ppm. Tooth pastes, mouth washes, tea and sea fish are the sources of fluoride. Exposure to these multiple sources results in several adverse effects in addition to the fluorosis. The present study aimed to test the effect of vitamin C and Ginkgo biloba against the behavioural deficits caused by fluoride. Rats were divided into five groups with six animals in each group (n = 6). Control group received ordinary tap water with 0.5 ppm of fluoride, the remaining groups received 100 ppm of fluoride for 30 days prior to fluoride exposure. Two groups of animals received 100 mg/kg body weight of vitamin C and G. biloba for 15 days prior to fluoride exposure. After 45 days, behavioural studies (T-Maze, passive avoidance) were conducted on the experimental animals. The results of the present study showed no behavioural deficits in the control group of animals however, the rats that received fluoride water exhibited impairment in their spatial learning and memory deficits. The deficits are not marked in the vitamin C and G. biloba groups. To conclude chronic exposure to high levels of fluoride causes severe impairment in the spatial learning and memory, these deficits can be ameliorated with the vitamin C and G. biloba.

  6. Fluoride bioaccumulation by hydroponic cultures of camellia (Camellia japonica spp.) and sugar cane (Saccharum officinarum spp.).

    Science.gov (United States)

    Camarena-Rangel, Nancy; Rojas Velázquez, Angel Natanael; Santos-Díaz, María del Socorro

    2015-10-01

    The ability of hydroponic cultures of camellia and sugar cane adult plants to remove fluoride was investigated. Plants were grown in a 50% Steiner nutrient solution. After an adaptation period to hydroponic conditions, plants were exposed to different fluoride concentrations (0, 2.5, 5 and 10 mg L(-1)). Fluoride concentration in the culture medium and in tissues was measured. In sugar cane, fluoride was mainly located in roots, with 86% of it absorbed and 14% adsorbed. Sugar cane plants removed 1000-1200 mg fluoride kg(-1) dry weight. In camellia plants the highest fluoride concentration was found in leaf. Roots accumulated fluoride mainly through absorption, which was 2-5 times higher than adsorption. At the end of the experiment, fluoride accumulation in camellia plants was 1000-1400 mgk g(-1) dry weight. Estimated concentration factors revealed that fluoride bioaccumulation is 74-221-fold in camellia plants and 100-500-fold in sugar cane plants. Thus, the latter appear as a suitable candidate for removing fluoride from water due to their bioaccumulation capacity and vigorous growth rate; therefore, sugar cane might be used for phytoremediation.

  7. Effect of high fluoride concentration in drinking water on children’s intelligence

    Directory of Open Access Journals (Sweden)

    Seraj B

    2006-07-01

    Full Text Available Background and Aim: Human and animal studies linking fluoride with diminished intelligence have been published. Although adverse effects of high intake of fluoride on intelligence and mental acuity continue to be reported, they are still controversial. The aim of this research was to investigate the relationship between fluoride in drinking water and children's intelligence. Materials and Methods: In this cross sectional study, 41 children were selected from the high fluoride area with 2.5mg/l (ppm fluoride in the drinking water and 85 children were selected from low fluoride area with 0.4mg/l (ppm fluoride in the drinking water. The intelligence quotient (IQ of each child was measured by the Raven's test. The history of illnesses affecting the nervous system, head trauma, birth weight (2.5kg or  2.5kg, residental history, age and sex of children were investigated by questionnaires completed by the children's parents. Data were analyzed by Chi-Square test with p<0.05 as the limit of significance. Results: In the high fluoride area the mean IQ of children (87.911 was significantly lower than in the low fluoride area (98.912.9 (P=0.025. Conclusion: Based on the findings of this study, exposure of children to high levels of fluoride may carry the risk of impaired development of intelligence.

  8. The effect of water purification systems on fluoride content of drinking water

    Directory of Open Access Journals (Sweden)

    Prabhakar A

    2008-03-01

    Full Text Available Objective: The purpose of the present study was to determine the effect of different water purification systems on the fluoride content of drinking water and to compare the efficacy of these water purification systems in reducing the fluoride content. Materials and Methods: Five different water purification systems were tested in this study. They were reverse osmosis, distillation, activated carbon, Reviva ® , and candle filter. The water samples in the study were of two types, viz, borewell water and tap water, these being commonly used by the people of Davangere City, Karnataka. The samples were collected before and after purification, and fluoride analysis was done using fluoride ion-specific electrode. Results: The results showed that the systems based on reverse osmosis, viz, reverse osmosis system and Reviva ® showed maximum reduction in fluoride levels, the former proving to be more effective than the latter; followed by distillation and the activated carbon system, with the least reduction being brought about by candle filter. The amount of fluoride removed by the purification system varied between the system and from one source of water to the other. Interpretation and Conclusion: Considering the beneficial effects of fluoride on caries prevention; when drinking water is subjected to water purification systems that reduce fluoride significantly below the optimal level, fluoride supplementation may be necessary. The efficacy of systems based on reverse osmosis in reducing the fluoride content of water indicates their potential for use as defluoridation devices.

  9. Effect of different frequencies of fluoride dentifrice and mouthrinse administration: an in situ study

    Directory of Open Access Journals (Sweden)

    Daniela Correia Cavalcante Souza

    2010-12-01

    Full Text Available The effect of a combination of topical fluoridation methods for inhibition of enamel demineralization in the face of a cariogenic challenge has not been clearly established. This in situ crossover study aimed to assess whether the addition of daily use of fluoride mouthrinse (FR to that of fluoride dentifrice (FD is equivalent to increasing the frequency of FD application in terms of the effect on enamel demineralization and fluoride content. Over 3 phases of 14 days each, 12 volunteers wore appliances containing enamel blocks exposed to a 20 % sucrose solution 8 times/day. During each phase the blocks underwent one of the following treatments: 2x/day FD, 2x/day FD + 1x/day FR, and 3x/day FD. The blocks were assessed for hardness and fluoride content. Three x/day FD did not differ from 2x/day + 1x/day FR, however it enhanced demineralization protection when compared to 2x/day FD. All treatments produced an increase in enamel fluoride content compared to no treatment (sound blocks (p < 0.05, but the differences between them were not significant. The results of this study suggest that the daily use of fluoride mouthrinse combined with that of fluoride dentifrice has similar effects on enamel demineralization and fluoride content when compared to increasing the frequency of fluoride dentifrice use.

  10. Fluoride in the drinking water of Pakistan and the possible risk of crippling fluorosis

    Directory of Open Access Journals (Sweden)

    M. A. Tahir

    2013-02-01

    Full Text Available To explore the possibility of fluoride toxicity, 747 water samples were collected from surface water and groundwater sources of 16 major cities of Pakistan, adopting a uniform sampling design with distribution of samples: Lahore (79, Kasur (46, Faisalabad (30, Khushab (50, Chakwal (51, Mianwali (30, Jhelum (53, Bahawalpur (60, Karachi (60, Mirpur Khas (55, Peshawar (38, Risalpur (35, Quetta (81, Ziarat (21, Loralai (21, and Mastung (37. Comparison of analytical findings with WHO Guidelines of Drinking Water for Fluoride (i.e., 1.5 ppm has concluded that 16% of the monitored water sources have fluoride concentration beyond the permissible safe limit of 1.5 mg L−1 falling in the concentration range of 1.6–25 mg L−1. The highest fluoride contamination (22% is detected in the Balochistan province followed by 19% in Punjab province. Comparatively higher fluoride levels of > 20% in the groundwater sources like hand pumps supported the possibility of increased groundwater contamination as excessive fluoride concentrations are expected to come from calcium-poor aquifers and in areas where fluoride-bearing minerals are common or where cation exchange of sodium for calcium occurs. Field observations have also indicated the prevalence of fluoride-associated health implications in the study areas with excessive fluoride in water sources. Findings of this study have provided bidirectional vision for the epidemiological investigations as well as to mitigate the issues in the affected vicinities of fluoride-rich areas.

  11. Acceptability of Salt Fluoridation in a Rural Latino Community in the United States: An Ethnographic Study.

    Directory of Open Access Journals (Sweden)

    Judith C Barker

    Full Text Available Compared to other population groups in the United States, caries (tooth decay is a disproportionately prevalent disease among Latino populations, especially among low-income and rural sub-groups and children under five years of age. Fluoride is a primary preventive for caries. While water fluoridation is a major and effective public health means for delivering fluoride on a mass scale, it does not reach many rural areas or population groups such as Latinos who eschew drinking water from municipal sources. This study examines the acceptability to such groups of salt fluoridation, an alternate means of delivering fluoride long used on a global scale. An ethnographic study in California's rural Central Valley was performed. Thirty individual interviews and 5 focus groups (N = 61 were conducted in Spanish to investigate low-income Latino migrant caregivers' experiences, views and understandings of domestic salt, oral health, caries prevention and fluoride. Audio data were transcribed, translated, coded and thematically analyzed. Table salt was readily available and frequently consumed. Both adult and child daily sodium consumption was high. Despite a general feeling that it was good, and present in dentifrices or dietary supplements, most participants had little knowledge about fluoride. Concerns were raised about cardio-vascular and other possibly deleterious effects if an increase in salt consumption occurred because fluoridated salt was viewed as having 'extra' benefits. Once informed about fluoride's safety and role in caries prevention, most participants expressed willingness to use fluoridated salt, especially if it benefitted children. Reassurance about its safety and benefits, and demonstration of its taste, were important aspects of acceptance. Taste was paramount. Participants would not consume more fluoridated salt than their current salt as that would result in unpleasant changes in food flavor and taste. While salt fluoridation is

  12. In vitro evaluation of fluoride products in the development of carious lesions in deciduous teeth

    Directory of Open Access Journals (Sweden)

    Lucineide de Melo Santos

    2009-09-01

    Full Text Available The purpose of this study was to evaluate the effect of the application of fluoride products on the development of enamel caries in deciduous teeth. A total of 108 deciduous teeth were chosen for the study. Acid-resistant varnish was applied on the teeth, leaving only one area of 5 mm x 1 mm of dental enamel exposed. The teeth were allocated randomly to one of the following groups: 1 control - toothpaste without fluoride; 2 1.23% fluoride gel; 3 Duraflur fluoride varnish; 4 Duraphat fluoride varnish; 5 Fluorniz fluoride varnish; 6 Fluorphat fluoride varnish; 7 varnish with Duofluorid; 8 12% silver fluoride diamine (Cariestop; 9 children's fluoride toothpaste (500 ppm. The tested products were applied on the teeth according to the manufacturer's recommendations and the teeth were stored in a moist environment for 24 hours. Each group of teeth was then subjected to a pH cycling model for 14 days, after which the teeth were cut through the center for an analysis of the depth of the carious lesion by polarized light microscopy. Comparisons were made between the treatments and the control group. The mean lesion depth values were 318 μm ± 39 (control, 213 μm ± 27 (fluoride gel, 203 μm ± 34 (Duraflur, 133 μm ± 25 (Duraphat, 207 μm ± 27 (Fluor-niz, 212 μm ± 27 (Fluorphat, 210 ± 28 (Duofluorid, 146 ± 31 (Cariestop and 228 ± 24 (fluoride toothpaste. None of the products used here was able to completely prevent the formation of lesions. The highest cariostatic effect was achieved by fluoride varnish Duraphat and the lowest by the fluoride toothpaste.

  13. Effect of various rinsing protocols after use of amine fluoride/stannous fluoride toothpaste on the bacterial composition of dental plaque

    NARCIS (Netherlands)

    van Loveren, C.; Gerardu, V.A.M.; Sissons, C.H.; van Bekkum, M.; ten Cate, J.M.

    2009-01-01

    This clinical study evaluated the effect of different oral hygiene protocols on the bacterial composition of dental plaque. After a 2-week period of using fluoride-free toothpaste, 30 participants followed three 1-week experimental protocols, each followed by 2-week fluoride-free washout periods in

  14. 高氟土壤的氟动力学吸附试验研究%Experiment on Fluoride Kinetics Adsorption of High Fluoride Soils

    Institute of Scientific and Technical Information of China (English)

    段江飞; 刘浩; 时孟杰

    2014-01-01

    通过室内水土试验,研究山东高密高氟地区的土壤对氟的动力学吸附特性,并用典型的低氟土试验进行对比。从化学动力学的角度讨论高氟土壤对氟的吸附行为。高氟土壤对氟的吸附有其特殊性;高氟土壤对氟的吸附分为快、慢两个阶段;羟基是影响氟吸附的重要因素。%Through indoor soil test,the article is based on strudies fluorine kinetics adsorption of soils in high density flu-oride region of Shandong Province and comparing by low fluoride soil experiment.It discusses the way of Fluoride adsorp-tion by high fluoride soils from the point of chemical kinetics.The results show that fluoride adsorption by high fluoride soils has its particularity;the tendency of fluoride adsorption is faster at the first stage and slower at the second stage;Hydroxyl is one of the important factors to affect the fluoride adsorption.

  15. The first barium tin(II) bromide fluoride

    Science.gov (United States)

    Dénès, Georges; Merazig, Hocine; Muntasar, Abdualhafeed; Porterfield, Robyn

    2014-04-01

    In an effort to prepare barium tin(II) bromide fluorides for the first time, possibly similar to the chloride fluorides obtained earlier in our laboratory, precipitation reactions were carried out by mixing aqueous solutions of SnF2 and of BaBr2.2H2O. In contrast with the chloride fluoride system, a single powdered phase was obtained throughout the SnF2 - BaBr2 system, with the yield being maximum at X ≈ 0.25, where X is the molar fraction of barium bromide in the reaction mixture. Phase identification with the JCPDS database failed to produce a match, confirming that a new phase had been produced. The exact chemical composition of the new compound has not been obtained yet. Based on the X value for the maximum yield, the Sn/Ba ratio is likely to be 3/1 or 2/1. The Mössbauer spectrum at ambient conditions shows that bonding to tin(II) is covalent, therefore with the tin lone pair being stereoactive. The Mössbauer parameters ( δ = 3.68 mm/s, Δ = 0.99 mm/s) are similar to those of SnBrF and of Sn2BrF5, thereby showing that tin is bonded to both fluorine and bromine. The larger isomer shift and lower quadrupole splitting than in tin(II) fluorides show that the stereoactivity of the tin lone pair is lower than in the fluorides. The Mössbauer parameters fit well the linear correlation of the quadrupole splitting versus the isomer shift" that has been shown to be present in other series of tin(II) compounds. The linear decrease on this correlation shows that the contribution of non-spherical orbitals ( p and d) to the lone pair is a much larger contributor to the quadrupole splitting than lattice distortions. The structure is likely made of Ba2+ cations and tin(II) fluoride bromide polyatomic anions, with covalent bonding withinthe anions.

  16. Pronounced reduction of fluoride exposure in free-ranging deer in North Bohemia (Czech Republic) as indicated by the biomarkers skeletal fluoride content and dental fluorosis.

    Science.gov (United States)

    Kierdorf, Uwe; Bahelková, Petra; Sedláček, František; Kierdorf, Horst

    2012-01-01

    Wild deer have been recommended as bioindicators of fluoride pollution. We compared bone fluoride concentrations and prevalence and severity of dental fluorosis in free-ranging European roe deer (Capreolus capreolus) and red deer (Cervus elaphus) from five counties in the northwestern part of the Czech Republic that had been collected by hunters and whose mandibles were presented at trophy exhibitions in the years 1996/1997 ("early period") and 2009 ("late period"). Data on atmospheric fluoride deposition suggested that the deer from the early period had been exposed to markedly higher fluoride levels than those from the late period. We therefore predicted a decline in skeletal fluoride levels and prevalence of dental fluorosis for both species from the early to the late period. Fluoride concentrations were determined in the coronoid process of the mandible, and assessment of dental fluorosis was performed on the permanent cheek teeth. A pronounced drop in fluoride concentrations from the early period (roe deer (n = 157), median: 3147 mg F(-)/kg of dry bone; red deer (n = 127), median: 1263 mg F(-)/kg of dry bone) to the late period (roe deer (n = 117), median: 350 mg F(-)/kg of dry bone; red deer (n = 72), median: 288 mg F(-)/kg of dry bone) was recorded. Prevalence of dental fluorosis also markedly declined from the early to the late period (roe deer: from 93% to 12%, red deer: from 87% to 28%). The reduction of fluoride deposition in the study area and, in consequence, fluoride exposure of the resident deer populations, is attributed largely to the implementation of emission control devices in the brown coal-fired power plants located in North Bohemia from the mid 1990s onwards. The findings of the present study demonstrate that wild deer are well suited for monitoring temporal changes in fluoride pollution of their habitats.

  17. Effect of fluoride in drinking water on children′s intelligence in high and low fluoride areas of Delhi

    Directory of Open Access Journals (Sweden)

    Hansa Kundu

    2015-01-01

    Full Text Available Introduction: Fluoride is one of the indispensable elements for the living being. However, the intake of F above the threshold level can affect the central nervous system even before causing dental or skeletal fluorosis. Aim: The aim was to assess the effect of fluoride in drinking water on the intelligence quotient (IQ of 8-12 years old school going children residing in high and low Fluoride (F areas of Delhi. Materials and Methods: A total of 200 school children were selected, 100 from low F area and 100 from high F area. The IQ of the children was assessed using Ravens Standardized Progressive Matrices Test. Information for each child′s sociodemographic data, mother′s diet during pregnancy, duration of residency in the village, source of drinking water, and duration of drinking water from the source was entered on a specially designed proforma from mothers of children. Height and weight were also recorded for each child to assess the nutritional status. Independent t-test and Chi-square test was used to compare mean IQ scores in high and low fluoridated areas. Pearson′s correlation and multivariate linear regression were used to appraise the issue of all the study variables on IQ. Results: Comparison of mean IQ of children in both high (76.20 ± 19.10 and low F (85.80 ± 18.85 areas showed a significant difference (P = 0.013. Multiple regression analysis between child IQ and all other independent variables revealed that mother′s diet during pregnancy (P = 0.001 along with F in drinking water (P = 0.017 were the independent variables with the greatest explanatory power for child IQ variance (r2 = 0.417 without interaction with other variables. Conclusion: Fluoride in the drinking water was significantly related with the IQ of children. Along with fluoride, mother′s diet during pregnancy was also found to be significantly related with IQ of children. Researches in the same field are further advocated with large sample size and over a

  18. Sources of carrier F-19 in F-18 fluoride

    Science.gov (United States)

    Link, J. M.; Shoner, S. C.; Krohn, K. A.

    2012-12-01

    Fluorine-18 is used for many PET radiopharmaceuticals. Theoretically 18F should be carrier free and a good candidate for nanochemistry. However, 18F has 10 to 1000 times more stable fluorine atoms than radioactive atoms. In order to understand the source of carrier fluoride and other ions associated with 18F radiosynthesis, anion concentrations of different components of 18F target systems as well as solvents and chemicals used in radiosynthesis were measured. Results: The enriched water used for production of 18F had low levels of anions. In general, the sources of anions, particularly of fluoride, were the chemical reagents used for synthesis and trace contaminants in tubing, valves and fittings. A major component of contamination was nitrate from irradiation of dissolved nitrogen gas in the target water.

  19. Sources of carrier F-19 in F-18 fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Link, J. M.; Shoner, S. C.; Krohn, K. A. [University of Washington, Department of Radiology, Molecular Imaging Center, 1959 NE Pacific St., Box 356004, Seattle, WA 98195-6004 (United States)

    2012-12-19

    Fluorine-18 is used for many PET radiopharmaceuticals. Theoretically {sup 18}F should be carrier free and a good candidate for nanochemistry. However, {sup 18}F has 10 to 1000 times more stable fluorine atoms than radioactive atoms. In order to understand the source of carrier fluoride and other ions associated with {sup 18}F radiosynthesis, anion concentrations of different components of {sup 18}F target systems as well as solvents and chemicals used in radiosynthesis were measured. Results: The enriched water used for production of {sup 18}F had low levels of anions. In general, the sources of anions, particularly of fluoride, were the chemical reagents used for synthesis and trace contaminants in tubing, valves and fittings. A major component of contamination was nitrate from irradiation of dissolved nitrogen gas in the target water.

  20. Poly(vinylidene fluoride)/Clay Nanocomposites by Melt Compounding

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The crystalline structures, morphologies, and mechanical properties of poly(vinylidene fluoride)/clay nanocomposites were studied using X-ray diffraction(XRD), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), polarized optical microscopy(POM), and tensile tests. The results of XRD and TEM show that organoclays are dispersed in the poly(vinylidene fluoride)(PVDF) matrix. A clay-induced crystal transformation from α-phase to β-phase of PVFD was confirmed by XRD and FTIR. Clay layers restricted the growth of spherulite. The tensile tests indicate that the tensile modulus and yield strength as well as the elongation at break decrease when clay is loaded.

  1. [Operational control of water fluoridation in Niterói, Rio de Janeiro, Brazil].

    Science.gov (United States)

    Maia, Lucianne Cople; Valença, Ana Maria Gondim; Soares, Eduardo Lúcio; Cury, Jaime Aparecido

    2003-01-01

    The aim of this study was to evaluate the operational control of water fluoridation at the city water supply plant in Niterói, Rio de Janeiro, Brazil, from January to December 2000. The water treatment supervisor filled out a questionnaire on the control of water fluoridation. In addition, water samples were collected every two weeks for fluoride analysis before and after treatment. Samples were analyzed by an independent laboratory using an ion-specific electrode. According to the water treatment supervisor, the entire process for controlling fluoride concentration in the water was rigorous and complied with Brazilian guidelines, but according to testing, 96% of samples were inadequate in terms of risks/benefits of fluoride use from water. The information obtained from the plant supervisor and the test data were thus mutually inconsistent. Based on these data, an independent water fluoride concentration control program is needed to ensure the benefits of dental caries prevention for the population.

  2. Growth kinetics of calcium fluoride at high supersaturation in a fluidized bed reactor.

    Science.gov (United States)

    Jiang, K; Zhou, K G; Yang, Y C; Du, H

    2014-01-01

    Crystallization process in a fluidized bed reactor (FBR) has been regarded as an environmentally friendly technology for the removal and recovery of fluoride from industrial wastewater. The growth kinetics of calcium fluoride at high supersaturation was studied for design, control, and operation of an FBR. The main variables, including supersaturation, superficial velocity, pH value, and particle size of seed that influenced the crystal growth were investigated. Then, a growth model was used to predict the linear growth rate of calcium fluoride at a high influent concentration of fluoride. The pressure difference in the FBR was used as a feature to characterize the growth rate of calcium fluoride. The aggregation and adsorption between seeds and fine particles were proven to be a possible mechanism for growth of calcium fluoride.

  3. Laparoscopic Repair of Morgagni Hernia Using Polyvinylidene Fluoride (PVDF) Mesh.

    Science.gov (United States)

    Godazandeh, Gholamali; Mortazian, Meysam

    2012-10-01

    We report the cases of two patients diagnosed with Morgagni hernia who presented with nonspecific abdominal symptoms. Both underwent laparoscopic surgery that used a dual-sided mesh, polyvinylidene fluoride (PVDF; Dynamesh IPOM®). The procedures were successful and both patients were discharged with no complications. There was no recurrence in 18 months of follow up.Herein is the report of these cases and a literature review.

  4. Effects of Gravity on Processing Heavy Metal Fluoride Fibers

    Science.gov (United States)

    Tucker, Dennis S.; Workman, Gary L.; Smith, Guy A.

    1997-01-01

    The effects of gravity on the crystal nucleation of heavy metal fluoride fibers have been studied in preliminary experiments utilizing NASA's KC-135 reduced gravity aircraft and a microgravity sounding rocket flight. Commercially produced fibers were heated to the crystallization temperature in normal and reduced gravity. The fibers processed in normal gravity showed complete crystallization while the fibers processed in reduced gravity did not show signs of crystallization.

  5. CONTRIBUTION OF MACROSCOPIC DIMENSION EFFECT TO PIEZOELFCTRICITY IN POLYVINYLIDENE FLUORIDE

    Institute of Scientific and Technical Information of China (English)

    WEN Jianxun; TAKEO FURUKAWA

    1987-01-01

    In this paper, we have studied the piezoelectricity in the poled uniaxially drawn polyvinylidene fluoride. The piezoelectric constants d31, d32, da33 and Young's moduli 1/s11 and 1/s22 have been determined as a function of the remanent polarization Pr. The piezoelectric constants of the samples show a strong in-plane anisotropy. Such an anisotropy is mostly attributable to different Poisson's ratio. It is found that the piezoelectric activity mainly arises from macroscopic dimensional change.

  6. Fluoride toothpaste utilization behaviour among preschool children in Perlis, Malaysia

    OpenAIRE

    Tay, H.L.; Zainudin, I.S.; Jaafar, N.

    2009-01-01

    Background Very mild fluorosis is quite prevalent in children and one of the sources may be attributed to poor fluoride toothpaste utilization habits. Aim To investigate the frequency of toothbrushing, parental supervision, the person who usually applied the toothpaste, toothpaste swallowing and spitting habits, size of toothbrush, type of toothpaste used and amount of toothpaste used by shape and weight. Methodology Observational cross-sectional study of a representative random sample of 373...

  7. Modified zirconium-eriochrome cyanine R determination of fluoride

    Science.gov (United States)

    Thatcher, L.L.

    1957-01-01

    The Eriochrome Cyanine R method for determining fluoride in natural water has been modified to provide a single, stable reagent solution, eliminate interference from oxidizing agents, extend the concentration range to 3 p.p.m., and extend the phosphate tolerance. Temperature effect was minimized; sulfate error was eliminated by precipitation. The procedure is sufficiently tolerant to interferences found in natural and polluted waters to permit the elimination of prior distillation for most samples. The method has been applied to 500 samples.

  8. Polyvinylidene fluoride based nanocomposites for the development of energy systems

    OpenAIRE

    Pereira, J. Nunes

    2013-01-01

    Tese de doutoramento em Física (especialidade em Ciências) The economic and environmental costs of current energy resources created the need to develop new methods to generate and store energy. In this sense, the development of polymer materials led to the emergence of a new generation of porous polymers for energy applications, which are typically described as “energy polymers”. The specific properties of poly(vinylidene fluoride) (PVDF) and its copolymer poly(vinylidene fl...

  9. Arsenic and fluoride in the groundwater of Mexico.

    Science.gov (United States)

    Armienta, M A; Segovia, N

    2008-08-01

    Concentrations of arsenic and fluoride above Mexican drinking water standards have been detected in aquifers of various areas of Mexico. This contamination has been found to be mainly caused by natural sources. However, the specific processes releasing these toxic elements into groundwater have been determined in a few zones only. Many studies, focused on arsenic-related health effects, have been performed at Comarca Lagunera in northern México. High concentrations of fluoride in water were also found in this area. The origin of the arsenic there is still controversial. Groundwater in active mining areas has been polluted by both natural and anthropogenic sources. Arsenic-rich minerals contaminate the fractured limestone aquifer at Zimapán, Central México. Tailings and deposits smelter-rich fumes polluted the shallow granular aquifer. Arsenic contamination has also been reported in the San Antonio-El Triunfo mining zone, southern Baja California, and Santa María de la Paz, in San Luis Potosí state. Even in the absence of mining activities, hydrogeochemistry and statistical techniques showed that arsenopyrite oxidation may also contaminate water, as in the case of the Independencia aquifer in the Mexican Altiplano. High concentrations of arsenic have also been detected in geothermal areas like Los Azufres, Los Humeros, and Acoculco. Prevalence of dental fluorosis was revealed by epidemiological studies in Aguascalientes and San Luis Potosí states. Presence of fluoride in water results from dissolution of acid-volcanic rocks. In Mexico, groundwater supplies most drinking water. Current knowledge and the geology of Mexico indicate the need to include arsenic and fluoride determinations in groundwater on a routine basis, and to develop interdisciplinary studies to assess the contaminant's sources in all enriched areas.

  10. Laser-matrix-fluoride effects on enamel demineralization.

    Science.gov (United States)

    Hsu, C Y; Jordan, T H; Dederich, D N; Wefel, J S

    2001-09-01

    Laser and fluoride have been shown to inhibit enamel demineralization. However, the role of organic matrix and their interactions remains unclear. This study investigated the interaction among CO2 laser irradiation, fluoride, and the organic matrix on the demineralization of human enamel. Twenty-four molars were selected and cut into halves. One half of each tooth was depleted of its lipid and protein. The other half served as a matched control. Each tooth half had two window areas, treated with a 2.0% NaF gel. All left windows then received a laser treatment. Next, the tooth halves were subjected to a four-day pH-cycling procedure that created caries-like lesions. Tooth sections were cut from the windows, and microradiographs were used for quantification of the demineralization. The combined fluoride-laser treatment led to 98.3% and 95.1% reductions in mineral loss for enamel with and without organic matrix, respectively, when compared with sound enamel.

  11. High performance fluoride optical coatings for DUV optics

    Science.gov (United States)

    Zhang, Lichao; Cai, Xikun

    2014-08-01

    In deep ultraviolet region that typical applications are used on the ArF wavelength, coated optics should meet stringent requirements of optical systems. To meet these requirements, systematical researches are carried out on fabrication and characterization methods of fluoride coatings. First, by optimizing of deposition processes, dense coatings with the refractive index of ~1.7 for LaF3 and ~1.4 for MgF2, together with extinction coefficients of ~2×10-4 on 193nm were realized. The transmission of AR coating for 193nm achieved by using optimized deposition techniques is 99.8%. Second, a method of designing shadowing masks was developed to solve the problem of correcting coating thickness distributions for complex DUV systems. By using the method, the thickness distribution error specification of 3% PV has been achieved on substrates with ~300mm diameters and large curvatures. Finally, the laser calorimetry method is used to evaluate the laser radiation stability of fluoride coatings. It is turned out that the damage coefficients of fluoride coatings, which are defined as the values of unrecoverable increase of the absorption during the laser irradiation process, are much lower than that of fused silica substrates. The above progresses could further support the realization of high performance DUV optical systems.

  12. The effects of airborne fluorides on oral conditions in Morocco

    Energy Technology Data Exchange (ETDEWEB)

    Haikel, Y.; Cahen, P.M.; Turlot, J.C.; Frank, R.M. (Universite Louis Pasteur, Strasbourg (France))

    1989-08-01

    The purpose of this study was to determine the prevalence and severity of dental caries and dental fluorosis, as well as various other oral conditions, in 2378 subjects (ages seven to 60) living in the fluoridated area of Khouribga and the non-fluoridated area of Beni Mellal, Morocco. The community index of dental fluorosis (CFI) ranged from 1.99 to 2.80 in the high-fluoride area: Over 90% of the population was affected, and more than one-third of the subjects showed moderate dental fluorosis. However, in Beni Mellal, more than 96% of the dentate subjects examined were free of dental fluorosis, and the CFI of 0.02 was considered not significant. Significant differences were observed between the two areas with respect to caries prevalence. DMFT and DMFS indices were markedly lower in the fluorosis area of Khouribga. The oral conditions of subjects appeared to be better in Khouribga, where the gingival and calculus indices were significantly lower than in Beni Mellal. The analyses of covariance showed no significant differences in plaque accumulation (PI) between the Khouribga and Beni Mellal samples. However, a close statistical correlation was found between PI and GI in Beni Mellal and Khouribga.

  13. Mechanical Properties of Calcium Fluoride-Based Composite Materials

    Science.gov (United States)

    Kleczewska, Joanna; Pryliński, Mariusz; Podlewska, Magdalena; Sokołowski, Jerzy; Łapińska, Barbara

    2016-01-01

    Aim of the study was to evaluate mechanical properties of light-curing composite materials modified with the addition of calcium fluoride. The study used one experimental light-curing composite material (ECM) and one commercially available flowable light-curing composite material (FA) that were modified with 0.5–5.0 wt% anhydrous calcium fluoride. Morphology of the samples and uniformity of CaF2 distribution were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). Mechanical properties were tested after 24-hour storage of specimens in dry or wet conditions. Stored dry ECM enriched with 0.5–1.0 wt% CaF2 showed higher tensile strength values, while water storage of all modified ECM specimens decreased their tensile strength. The highest Vickers hardness tested after dry storage was observed for 2.5 wt% CaF2 content in ECM. The addition of 2.0–5.0 wt% CaF2 to FA caused significant decrease in tensile strength after dry storage and overall tensile strength decrease of modified FA specimens after water storage. The content of 2.0 wt% CaF2 in FA resulted in the highest Vickers hardness tested after wet storage. Commercially available composite material (FA), unmodified with fluoride addition, demonstrated overall significantly higher mechanical properties. PMID:28004001

  14. Mechanical Properties of Calcium Fluoride-Based Composite Materials

    Directory of Open Access Journals (Sweden)

    Monika Łukomska-Szymańska

    2016-01-01

    Full Text Available Aim of the study was to evaluate mechanical properties of light-curing composite materials modified with the addition of calcium fluoride. The study used one experimental light-curing composite material (ECM and one commercially available flowable light-curing composite material (FA that were modified with 0.5–5.0 wt% anhydrous calcium fluoride. Morphology of the samples and uniformity of CaF2 distribution were analyzed using Scanning Electron Microscopy (SEM and Energy Dispersive Spectroscopy (EDS. Mechanical properties were tested after 24-hour storage of specimens in dry or wet conditions. Stored dry ECM enriched with 0.5–1.0 wt% CaF2 showed higher tensile strength values, while water storage of all modified ECM specimens decreased their tensile strength. The highest Vickers hardness tested after dry storage was observed for 2.5 wt% CaF2 content in ECM. The addition of 2.0–5.0 wt% CaF2 to FA caused significant decrease in tensile strength after dry storage and overall tensile strength decrease of modified FA specimens after water storage. The content of 2.0 wt% CaF2 in FA resulted in the highest Vickers hardness tested after wet storage. Commercially available composite material (FA, unmodified with fluoride addition, demonstrated overall significantly higher mechanical properties.

  15. Calix[4]arene-Based New Neutral Sensors for Fluoride

    Institute of Scientific and Technical Information of China (English)

    LIU,Shun-Ying; MENG,Ling-Zhi; LIU,Xin; HE,Yong-Bing

    2004-01-01

    @@ The development of new receptors which can recognize neutral and charged species has attracted considerable interest in the recent past.[1] Anions such as fluoride, chloride, phosphate and carboxylate play crucial roles in a range of biological phenomena and are implicated in many disease states.[2] Investigations on molecular and/or ionic recognition by calixarenes and their derivatives as synthetic receptors have attracted increasing attention in supramolecular chemistry because of their modifiable structure.[3] However, calix[4]arenes-based neutral receptors containing thiourea and amide groups are still rare. In this paper, we report fluoride selective optical chemosensors 4 and 5, based on calix[4]arene thiourea and amide derivatives, which only show a remarkable absorption change in the presence of fluoride ions, while have no any change upon addition of other anions (Cl- Br-, I-, AcO- and H2PO4-). The association constants are 947 and 2883 mol·L-1, respectively. The synthesis of calix[4]arene derivatives 4 and 5 is outlined in the following Scheme 1.

  16. Fabrication and characterization of fluoridated hydroxyapatite nanopowders via mechanical alloying

    Energy Technology Data Exchange (ETDEWEB)

    Fathi, M.H. [Department of Materials Engineering, Isfahan University of Technology, Isfahan, 8415683111 (Iran, Islamic Republic of); Zahrani, E. Mohammadi [Department of Materials Engineering, Isfahan University of Technology, Isfahan, 8415683111 (Iran, Islamic Republic of)], E-mail: emohamadizahrani@gmail.com

    2009-05-05

    The aim of this work was preparation and characterization of fluoridated hydroxyapatite (FHA) nanopowders with different degrees of fluoridation via mechanical alloying (MA) method. FHA nanopowders with a chemical composition of Ca{sub 10}(PO{sub 4}){sub 6}OH{sub 2-x}F{sub x} (where x values were selected equal to 0.0, 0.5, 1.0, 1.5, and 2.0) were synthesized using a mixture of appropriate amounts of calcium hydroxide, phosphorous pentoxide, and calcium fluoride powders by 6 h of mechanical alloying at 300 rpm, using eight balls with a diameter of 20 mm, and the ball-to-powder weight ratio equal to 35:1. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and ICP-OES analysis techniques were utilized in order to evaluate phase composition, agglomerates size distribution, morphology and particle size, functional groups, and purity of synthesized FHA nanopowders. The FTIR result combined with the X-ray diffraction indicated that single phase of homogeneous FHA with the carbonate peaks in the FTIR spectrum could be prepared after 6 h MA. TEM photomicrograph revealed that obtained powder after 6 h of MA was composed of FHA nanoparticles (35-65 nm). The results of ICP-OES analysis illustrated that synthesized nanopowder could fulfill the requirement of ASTM F1185-88 to be used as a biomaterial.

  17. Feasibility and costs of water fluoridation in remote Australian Aboriginal communities

    Directory of Open Access Journals (Sweden)

    Ehsani Jonathon P

    2007-06-01

    Full Text Available Abstract Background Fluoridation of public water supplies remains the key potential strategy for prevention of dental caries. The water supplies of many remote Indigenous communities do not contain adequate levels of natural fluoride. The small and dispersed nature of communities presents challenges for the provision of fluoridation infrastructure and until recently smaller settlements were considered unfavourable for cost-effective water fluoridation. Technological advances in water treatment and fluoridation are resulting in new and more cost-effective water fluoridation options and recent cost analyses support water fluoridation for communities of less than 1,000 people. Methods Small scale fluoridation plants were installed in two remote Northern Territory communities in early 2004. Fluoride levels in community water supplies were expected to be monitored by local staff and by a remote electronic system. Site visits were undertaken by project investigators at commissioning and approximately two years later. Interviews were conducted with key informants and documentation pertaining to costs of the plants and operational reports were reviewed. Results The fluoridation plants were operational for about 80% of the trial period. A number of technical features that interfered with plant operation were identified and addressed though redesign. Management systems and the attitudes and capacity of operational staff also impacted on the effective functioning of the plants. Capital costs for the wider implementation of these plants in remote communities is estimated at about $US94,000 with recurrent annual costs of $US11,800 per unit. Conclusion Operational issues during the trial indicate the need for effective management systems, including policy and funding responsibility. Reliable manufacturers and suppliers of equipment should be identified and contractual agreements should provide for ongoing technical assistance. Water fluoridation units should

  18. Self-Reported Knowledge and Attitude of Dentists towards Prescription of Fluoride

    Directory of Open Access Journals (Sweden)

    Afsaneh Pakdaman

    2016-04-01

    Full Text Available Objectives: This study aimed to assess the self-reported knowledge and attitude of dentists towards fluoride prescription.Materials and Methods: A questionnaire survey was conducted at the national annual dental congress in 2010 in Tehran-Iran. Dentists’ level of knowledge about the preventive effects of systemic and topical administration of fluoride was assessed as well as their attitudes towards its application. Self-reported practice for two paper patients (a child and an adult with high risk of dental caries was assessed. Data were analyzed using SPSS, chi-square test and logistic regression.Results: A total of 347 dentists including 232 (73.4% males and 84 (26.6% females responded; 84.7% agreed/strongly agreed with addition of fluoride to water and 66% agreed with prescription of fluoride tablets/drops in fluoride-deficient areas. Fluoridated toothpastes were considered useful by 85.3%; this rate was 78.7% for fluoride rinse and 87.6% for fluoride varnish, foam or gel. The majority of dentists (67.4% reported no access to clear guidelines on fluoride application; 83% considered fluoride to be effective for caries prevention in children less than 12 years and 39.2% believed it was useful for adults and adolescents; 50% of the respondents correctly managed the high-risk child and adult with respect to appropriate selection of fluoride product. Younger dentists (OR=0.94; 95% CI 0.8-0.9; P=0.043 and new graduates (OR=0.94; 95% CI 0.89-0.99; P=0.034 were more likely to correctly manage the high-risk child.  Conclusion: Dentists had good knowledge and positive attitudes towards fluoride application. New graduates were more likely to correctly manage the young high-risk patient.

  19. Self-Reported Knowledge and Attitude of Dentists towards Prescription of Fluoride

    Science.gov (United States)

    Yarahmadi, Zahra; Kharazifard, Mohammad Javad

    2015-01-01

    Objectives: This study aimed to assess the self-reported knowledge and attitude of dentists towards fluoride prescription. Materials and Methods: A questionnaire survey was conducted at the national annual dental congress in 2010 in Tehran-Iran. Dentists’ level of knowledge about the preventive effects of systemic and topical administration of fluoride was assessed as well as their attitudes towards its application. Self-reported practice for two paper patients (a child and an adult with high risk of dental caries) was assessed. Data were analyzed using SPSS, chi-square test and logistic regression. Results: A total of 347 dentists including 232 (73.4%) males and 84 (26.6%) females responded; 84.7% agreed/strongly agreed with addition of fluoride to water and 66% agreed with prescription of fluoride tablets/drops in fluoride-deficient areas. Fluoridated toothpastes were considered useful by 85.3%; this rate was 78.7% for fluoride rinse and 87.6% for fluoride varnish, foam or gel. The majority of dentists (67.4%) reported no access to clear guidelines on fluoride application; 83% considered fluoride to be effective for caries prevention in children less than 12 years and 39.2% believed it was useful for adults and adolescents; 50% of the respondents correctly managed the high-risk child and adult with respect to appropriate selection of fluoride product. Younger dentists (OR=0.94; 95% CI 0.8–0.9; P=0.043) and new graduates (OR=0.94; 95% CI 0.89–0.99; P=0.034) were more likely to correctly manage the high-risk child. Conclusion: Dentists had good knowledge and positive attitudes towards fluoride application. New graduates were more likely to correctly manage the young high-risk patient. PMID:27123013

  20. Water defluoridation by hydrotalcite and takovite and subsequent formation of new fluoride-bearing phases.

    Science.gov (United States)

    Guo, Qinghai; Guo, Qingshan

    2013-01-01

    Hydrotalcite, takovite and their calcination products were used to remove fluoride from water at various molar ratios of initial fluoride to solid (F(initial):hydrotalcite or F(initial):takovite) ranging from 0.1 to 2.0, and their theoretical fluoride uptake limit. X-Ray powder diffraction and 19F magic-angle spinning nuclear magnetic resonance spectra were used to characterize the solid samples and to investigate the fluoride removal mechanisms. Water defluoridation by uncalcined and calcined hydrotalcite attributes mainly to the intercalation of F- into their interlayers and adsorption of F- onto their external surfaces. The fluoride removal percent of calcined hydrotalcite are higher than those of uncalcined hydrotalcite at F(initial):hydrotalcite ratios varying between 0.1 and 1.5, whereas the situation is the reverse at a ratio of 2.0 in the 30 d sorption runs. It was induced by the precipitation of fluoride-bearing nordstrandite and sellaite during a long contact of high concentration fluoride solution with uncalcined hydrotalcite. In contrast, the sorption of fluoride by uncalcined and calcined takovite occurs predominantly on their external surfaces. Fluoride-bearing gibbsite or nordstrandite and NiF2 were formed as the fluoride solutions were treated by uncalcined takovite in the 30 d runs, which enhanced its defluoridation effect. The fluoride removal efficiency of calcined takovite is much lower than uncalcined takovite and calcined hydrotalcite, because the expected restoration of original layered structure of takovite did not happen during the reaction of calcined takovite with the fluoride solution.

  1. Acceptability of Salt Fluoridation in a Rural Latino Community in the United States: An Ethnographic Study

    Science.gov (United States)

    Barker, Judith C.; Hoeft, Kristin S.

    2016-01-01

    Compared to other population groups in the United States, caries (tooth decay) is a disproportionately prevalent disease among Latino populations, especially among low-income and rural sub-groups and children under five years of age. Fluoride is a primary preventive for caries. While water fluoridation is a major and effective public health means for delivering fluoride on a mass scale, it does not reach many rural areas or population groups such as Latinos who eschew drinking water from municipal sources. This study examines the acceptability to such groups of salt fluoridation, an alternate means of delivering fluoride long used on a global scale. An ethnographic study in California’s rural Central Valley was performed. Thirty individual interviews and 5 focus groups (N = 61) were conducted in Spanish to investigate low-income Latino migrant caregivers’ experiences, views and understandings of domestic salt, oral health, caries prevention and fluoride. Audio data were transcribed, translated, coded and thematically analyzed. Table salt was readily available and frequently consumed. Both adult and child daily sodium consumption was high. Despite a general feeling that it was good, and present in dentifrices or dietary supplements, most participants had little knowledge about fluoride. Concerns were raised about cardio-vascular and other possibly deleterious effects if an increase in salt consumption occurred because fluoridated salt was viewed as having ‘extra’ benefits. Once informed about fluoride’s safety and role in caries prevention, most participants expressed willingness to use fluoridated salt, especially if it benefitted children. Reassurance about its safety and benefits, and demonstration of its taste, were important aspects of acceptance. Taste was paramount. Participants would not consume more fluoridated salt than their current salt as that would result in unpleasant changes in food flavor and taste. While salt fluoridation is acceptable

  2. In vivo efficacy of tamarind (Tamarindus indica) fruit extract on experimental fluoride exposure in rats.

    Science.gov (United States)

    Dey, S; Swarup, D; Saxena, Anju; Dan, Ananya

    2011-12-01

    The study was undertaken to determine the efficacy of hydro-methanolic (1:1) extract of tamarind (Tamarindus indica L.) fruit pulp in removing body fluoride burden. Thirty rats were divided into five groups. Keeping no fluoride group as the control, rats of no treatment, low dose, middle dose and high dose groups received sodium fluoride orally at the rate of 200mg per kg body weight daily for 14 weeks. Rats of low dose, middle dose and high dose group simultaneously received tamarind fruit pulp extract at three doses, viz. 25 (low), 50 (medium) and 100mg (high) per kg body weight orally, respectively. Fluoride concentration in blood, urine and long bone of experimental rats was monitored to assess the efficacy of the extract. Mean serum fluoride concentration in fluoride exposed rats was 0.145 ± 0.009 and 0.783 ± 0.042 μg/ml on days 0 and 98. In comparison, fluoride concentrations in tamarind treated rats were 0.179 ± 0.021 and 0.633 ± 0.015; 0.179 ± 0.021 and 0.502 ± 0.025 and 0.176 ± 0.021 and 0.498 ± 0.030 μg/ml in low, medium and high dose groups, respectively on day 0 and day 98 of the experiment. There was a significant (p ≤ 0.01) increase in urinary fluoride excretion from day 28 onwards. The mean fluoride concentration in long bones of treated rats was significantly lower than the values recorded in fluoride exposed rats. These findings suggest that concomitant use of tamarind fruit pulp extract can reduce fluoride concentration in blood and bone and enhanced urinary excretion, indicating the ameliorative potential of fruits of tamarind in fluoride toxicity.

  3. A randomized clinical trial on arresting dentin caries in preschool children by topical fluorides

    OpenAIRE

    Duangthip, Duangporn

    2015-01-01

    Introduction: Silver diammine fluoride (SDF) has been found to be effective in preventing and arresting dental caries in children. The annual or semi-annual application of SDF may not be practical in migratory populations or effective high caries risk patients. So far, no data are available about the effectiveness of intensive fluoride treatment in arresting dental caries in primary teeth. Objectives: This study aimed to compare the effectiveness of three topical fluoride application prot...

  4. Fluoride: A naturally-occurring health hazard in drinking-water resources of Northern Thailand.

    Science.gov (United States)

    Chuah, C Joon; Lye, Han Rui; Ziegler, Alan D; Wood, Spencer H; Kongpun, Chatpat; Rajchagool, Sunsanee

    2016-03-01

    In Northern Thailand, incidences of fluorosis resulting from the consumption of high-fluoride drinking-water have been documented. In this study, we mapped the high-fluoride endemic areas and described the relevant transport processes of fluoride in enriched waters in the provinces of Chiang Mai and Lamphun. Over one thousand surface and sub-surface water samples including a total of 995 collected from shallow (depth: ≤ 30 m) and deep (> 30 m) wells were analysed from two unconnected high-fluoride endemic areas. At the Chiang Mai site, 31% of the shallow wells contained hazardous levels (≥ 1.5 mg/L) of fluoride, compared with the 18% observed in the deep wells. However, at the Lamphun site, more deep wells (35%) contained water with at least 1.5mg/L fluoride compared with the shallow wells (7%). At the Chiang Mai site, the high-fluoride waters originate from a nearby geothermal field. Fluoride-rich geothermal waters are distributed across the area following natural hydrological pathways of surface and sub-surface water flow. At the Lamphun site, a well-defined, curvilinear high-fluoride anomalous zone, resembling that of the nearby conspicuous Mae Tha Fault, was identified. This similarity provides evidence of the existence of an unmapped, blind fault as well as its likely association to a geogenic source (biotite-granite) of fluoride related to the faulted zone. Excessive abstraction of ground water resources may also have affected the distribution and concentration of fluoride at both sites. The distribution of these high-fluoride waters is influenced by a myriad of complex natural and anthropogenic processes which thus created a challenge for the management of water resources for safe consumption in affected areas. The notion of clean and safe drinking water can be found in deeper aquifers is not necessarily true. Groundwater at any depth should always be tested before the construction of wells.

  5. Historical biomonitoring of fluoride pollution by determining fluoride contents in roe deer (Capreolus capreolus L.) antlers and mandibles in the vicinity of the largest Slovene thermal power plant.

    Science.gov (United States)

    Jelenko, Ida; Pokorny, Boštjan

    2010-12-15

    Roe deer antlers/mandibles are a useful tool for determination of ambient fluoride pollution. Antlers have a well-defined annual cycle of growth, therefore they represent a natural standardisation of samples during winter months. On the contrary, mandibles accumulate fluorides during the whole life of an organism, thus they reflect aggregated effect of fluoride pollution trough the life-span of an organism. Both tissues are easily available; mandibles are often systematically collected with the purpose of cognitive management and control, and antlers could be gathered from private well-dated hunters' collections. Considering these benefits, fluoride contents were measured in 141 antlers (period 1960-2007) and 220 mandibles (period 1997-2009) of roe deer, shot in the vicinity of the largest Slovene Thermal Power Plant of Šoštanj (ŠTPP) as one of the major sources of fluorides in Slovenia. Fluoride contents in antlers significantly differed among age categories, and ranged from 110 to 1210 mg/kg in yearlings, 130 to 2340 mg/kg in young adults, and 250 to 2590 mg/kg in older adults, respectively. Fluoride levels in mandibles were also significantly different among age categories, and ranged from 30.0 to 227 mg/kg in fawns, 33.8 to 383 mg/kg in yearlings, and 61.5 to 1020 mg/kg in adults, respectively. Comparison of these results with previously reported fluoride contents in antlers and mandibles of roe deer from different areas of Europe revealed that the study area has never been extensively contaminated with fluorides. Moreover, trends of fluoride contents in both tissues confirmed a significant decrease of fluoride pollution in the area after the years 1995 and 2000, when flue-gas cleaning devices were constructed on the ŠTPP. Indeed, highly positive correlations between annual emissions from the ŠTPP and mean annual fluoride contents in antlers/mandibles confirmed that both tissues may be a useful tool for assessing temporal trends in ambient fluoride

  6. Salivary retention after application of fluoride gel using toothbrush or tray: a crossover trial.

    Science.gov (United States)

    Ribeiro, Cecilia Claudia Costa; Lula, Estevam Carlos de Oliveira; Azevedo, Izabelle Maria Cabral de; Maia, Mariana de Figueiredo Lopes E; Lopes, Fernanda Ferreira

    2012-01-01

    Currently, there are no studies in the literature evaluating salivary fluoride retention after small amounts of fluoride gel are applied to children's teeth. Therefore, the objective of the present study was to compare salivary retention after gel application using a toothbrush or by traditional application with trays. In this crossover study, children with active caries (n = 10) were randomized into one of the following treatment groups: a) application of fluoride gel using a tray (control), or b) application of fluoride gel with a toothbrush (treatment). After a 7-day washout period, the treatments were inverted. Unstimulated saliva samples were collected at baseline and 0.5, 5, 15, 30, 60 and 120 minutes after acidulated phosphate fluoride (APF) gel application in order to analyze fluoride retention in saliva. The area under the curve (AUC) was also calculated. There were no differences in fluoride retention after application of small amounts of APF with a toothbrush compared to traditional gel application using trays at all time points studied, and no differences in AUC were observed (Student t-test, p > 0.05). These results suggest that application of fluoride gel in children using a toothbrush can be utilized as an option rather than traditional trays, since the same salivary retention of fluoride is obtained using a lower dose.

  7. Determination of fluoride source in ground water using petrographic studies in Dashtestan area, south of Iran

    Science.gov (United States)

    Battaleb-Looie, Sedigheh; Moore, Farid, ,, Dr.

    2010-05-01

    The groundwater occurs in Dashtestan area, contains a high level of fluoride. Since groundwater is vastly used for drinking and irrigation purposes, the local residents are at high risk of fluoride toxicity, as already evidenced by the occurrence of dental Fluorosis in many residents. 35 surface and groundwater samples were collected in September, 2009. The results show that in 23 samples the fluoride concentration is above the permissible level (1.5ppm). Petrographic study of lithological units in the catchment area indicates that mica minerals are the most probable source of fluoride content in the study area.

  8. Effects of fluoride on animals and plants in the south Safi zone

    Energy Technology Data Exchange (ETDEWEB)

    Kessabi, M.; Assimi, B.; Braun, J.P.

    1984-09-01

    Fluoride pollution caused by the factories processing natural phosphates 10 km south of Safi affects animals and plants. Fluoride concentrations are 4-10 times higher in contaminated plants than in plants from the non-polluted areas. Fluoride levels of 700 ppm, 280 ppm, 75 ppm, 25 ppm, and 1.6 ppm were found in grass, forage, straw, barley caryopses and drinking water, respectively. The ingestion of polluted plants and the inhalation of fluoride (as gases and dusts) induce a high daily intake in animals which show important signs and lesions of dental fluorosis. Serious toxicity signs were also observed in plants.

  9. Fluoride concentrations in industrialized beverages consumed by children in the city of Bauru, Brazil

    Directory of Open Access Journals (Sweden)

    Carolina Simonetti Lodi

    2007-06-01

    Full Text Available The increasing consumption of juices, soft drinks and teas among children has increased significantly fluoride ingestion at the age range of risk for development of dental fluorosis. Objective: The purpose of this study was to evaluate fluoride concentrations in some brands of industrialized beverages consumed by children in the city of Bauru, SP, Brazil. Material and Methods: 98 brands of beverages were analyzed, divided into 3 lots, comprising 36, 32 and 30 brands, respectively, for the first, second and third lots. Fluoride concentrations were determined by HMDS-facilitated diffusion, using a fluoride ion-specific electrode (Orion 9409. Results: Fluoride concentrations ranged between 0.04 and 1.76 µg F/mL. It was observed a wide variation in fluoride concentrations among the different brands, as well as the different lots of the same brand. There was no information on fluoride concentrations on the labels of any product. Conclusions: Some of the products analyzed could contribute significantly to the total fluoride intake and, thus, be important risk factors for development of dental fluorosis, which indicates the need of controlling the production of these beverages with respect to fluoride concentration.

  10. Fluoride and nitrate removal from brackish groundwaters by batch-mode capacitive deionization.

    Science.gov (United States)

    Tang, Wangwang; Kovalsky, Peter; He, Di; Waite, T David

    2015-11-01

    Capacitive deionization (CDI) is an emerging water desalination technology in which pairs of porous electrodes are electrically charged to remove ionic species from water. In this work, the feasibility of fluoride and nitrate removal from brackish groundwaters by batch-mode CDI was investigated. Initially, the effects of flow rate, initial fluoride concentration, and initial coexisting NaCl concentration on fluoride removal were studied. The steady-state fluoride concentration declined as the initial fluoride concentration decreased while initial NaCl concentration remained constant. Due to the competitive electrosorption between fluoride and chloride for limited pore surface sites, a higher initial chloride concentration resulted in a higher equilibrium dissolved fluoride concentration. A simplified one-dimensional transport model for dual anions was developed and found to reliably describe the dynamic process of removal of both fluoride and chloride ions in CDI cells over a range of well-defined operating conditions. Based on the ability of the model to describe fluoride removal, it was extended to description of nitrate removal from brackish groundwaters and also found to perform well. Thus, the approach to description of ion removal, at least in batch studies, appears robust and should assist in optimization of design and operating conditions such that optimal removal of trace ionic species is achieved even when high background concentrations of salt are present.

  11. Comparison of fluoride concentration in several types of green tea consumed in Iran

    Directory of Open Access Journals (Sweden)

    S. Maleki Kambakhsh

    2016-04-01

    Full Text Available Background: Tea is known as a source of fluoride that not only can prevent tooth decay but also can increase the risk of dental fluorosis in overuse or in combination with other sources of fluoride. Objective: The aim of this study was to compare the fluoride concentration in three brands of green tea consumed in Iran. Methods: This experimental study was conducted in Qazvin University of medical Science during 2012. Three brands of green tea (bag type and packed type were evaluated. Two bags of every bag type and two 1-gram samples of every packed type were selected. Each time, the samples were placed in 100 ml distilled boiling water and were restored in an incubator at 80 ºC. Three and ten minutes after tea brewing, the fluoride concentration of filtrated water was measured by chromatography and was recorded in milligram per liter. Data were analyzed using ANOVA and repeated measures ANOVA. Findings: The fluoride concentration in bag type green tea was more than packed type. The fluoride concentration was not different among three brands of green tea. The fluoride concentration after ten minutes brewing was not significantly different from the concentration after three minutes brewing. Conclusion: With regards to the results, it seems that green tea brand and the brewing time does not affect fluoride release. The fluoride release in bag type green tea is more than packed type.

  12. Caries-­preventive Effect of 1300ppm Fluoride and Carrageenan Containing Toothpaste

    Directory of Open Access Journals (Sweden)

    Anton Rahardjo

    2013-07-01

    Full Text Available 72 1024x768 Various studies stated that the increase concentration of fluoride in toothpastes leads to the reduction of calcium loss in enamel. Objective: The purpose of this study was to test the difference between the effect of 1300ppm fluoride with carrageenan toothpaste and 1000ppm fluoride only toothpaste on roughness and hardness of enamel surface. Methods: Enamel specimens were obtained from 30 extracted human premolars. The enamel specimens were randomly assigned to one of the three groups, 1300ppm fluoride with carrageenan toothpaste, 1000ppm fluoride only toothpaste and toothpaste with no fluoride as a negative control. The samples were immersed in 1% citric acid with pH 4 for 150 seconds for demineralization, afterwards exposed to each toothpaste for 6 minutes. Results: The results demonstrated that toothpaste with 1300ppm fluoride with carregeenan has two times greater efficacy in triggering remineralization than toothpaste with 1000ppm fluoride only, with regards to surface roughness and hardness recovery in an in vitro caries model. Conclusion: The results suggested that treatment of enamel with toothpaste containing 1300ppm fluoride with carrageenan has high potential in inducing remineralization on enamel.DOI: 10.14693/jdi.v20i1.125

  13. In vitro evaluation of fluoride products in the development of carious lesions in deciduous teeth

    OpenAIRE

    Lucineide de Melo Santos; José Ivo Limeira dos Reis; Maria Perolina de Medeiros; Sheyla Moreira Ramos; Juliane Mendes de Araújo

    2009-01-01

    The purpose of this study was to evaluate the effect of the application of fluoride products on the development of enamel caries in deciduous teeth. A total of 108 deciduous teeth were chosen for the study. Acid-resistant varnish was applied on the teeth, leaving only one area of 5 mm x 1 mm of dental enamel exposed. The teeth were allocated randomly to one of the following groups: 1) control - toothpaste without fluoride; 2) 1.23% fluoride gel; 3) Duraflur fluoride varnish; 4) Duraphat fluor...

  14. Development of an empirical model for fluoride removal from photovoltaic wastewater by electrocoagulation process

    KAUST Repository

    Drouiche, Nadjib

    2011-05-01

    Electrocoagulation experiments were conducted with bipolar aluminium electrodes to determine the optimum conditions for the fluoride removal from synthetic photovoltaic wastewater. A high fluoride concentration in community water supplies can cause fluorosis which has a detrimental effect on human health in particular on teeth and bones. A full 23 factorial design of experiments was used to obtain the best conditions of fluoride removal from water solutions. The three factors considered were initial fluoride concentration, applied potential, and supporting electrolyte dosage. Two levels for each factor were used; supporting electrolyte (0 and 100), applied potential (10 and 30 V), and initial fluoride concentration (20 and 25 mg/L). Results showed that the optimum conditions for fluoride removal from photovoltaic wastewater containing an initial fluoride concentration of 20 mg/L were a supporting electrolyte dose of 100 mg/L and an applied potential of 30 V. These gave a residual fluoride concentration of 8.6 mg/L which was below the standard discharge limit. A mathematical equation showing the relation between residual fluoride concentration and the effective variables was also developed. © 2011 Desalination Publications. All rights reserved.

  15. Fluoride Removal From Drinking Water by Electrocoagulation Using Iron and Aluminum Electrodes

    Directory of Open Access Journals (Sweden)

    Takdastan

    2014-07-01

    Full Text Available Background Existence of fluoride in drinking water above the permissible level causes human skeletal fluorosis. Objectives Electrocoagulation by iron and aluminum electrodes was proposed for removing fluoride from drinking water. Materials and Methods Effects of different operating conditions such as treatment time, initial pH, applied voltage, type and number of electrodes, the spaces between aluminum and iron electrodes, and energy consumption during electrocoagulation were investigated in the batch reactor. Variable concentrations of fluoride solution were prepared by mixing proper amounts of sodium fluoride with deionized water. Results Experimental results showed that aluminum electrode is more effective in fluoride removal than iron, as in 40 minutes and initial pH of 7.5 at 20 V, the fluoride removal process reached to 97.86%. The final recommendable limit of fluoride (1.5 mg/L was obtained in 10 minutes at 20 V with the aluminum electrode. Conclusions In electrocoagulation with iron and aluminum electrodes, increase of voltage, number of electrodes and reaction time as well as decrease of the spaces between electrodes, enhanced the fluoride removal efficiency from drinking water. In addition the effect of pH and initial concentration of fluoride varied with types of electrodes.

  16. Caffeic acid, a phyto polyphenol mitigates fluoride induced hepatotoxicity in rats: A possible mechanism.

    Science.gov (United States)

    Kanagaraj, Vishnu Vignesh; Panneerselvam, Lakshmikanthan; Govindarajan, Vimal; Ameeramja, Jaishabanu; Perumal, Ekambaram

    2015-01-01

    Fluoride induced hepatotoxicity has been extensively studied in both humans and animals. However, the mechanism underlying in the hepatotoxicity of experimental fluorosis remains obscure. The severity of fluoride toxicity was reduced by oral administration of certain plant derived antioxidants. Caffeic acid (CA) a polyphenolic compound has diverse range of pharmacological activity in the biological system. Therefore, the present study was aimed to investigate the protective mechanism of CA, against fluoride induced hepatotoxicity in rats. The rats were treated with 300 ppm of NaF via drinking water ad libitum alone and in combination with CA at a dose of 50 mg/kg daily for 30 days by oral intubation. CA treatment significantly prevented fluoride induced hepatic damage as evident from the histopathological studies and declined levels of serum fluoride and liver marker enzymes. A significant decrease in the levels of enzymatic (SOD2, CAT, GPx, and GSTpi class) and nonenzymatic (GSH and Vitamin C) antioxidants along with increased ROS, lipid peroxidation, protein carbonyl content, and nitrate levels by fluoride were also prevented in these groups. In addition, CA inhibits fluoride induced apoptosis by altering the Bax and caspase-3p20 expressions. Further, fluoride induced upregulation of Nox4, p38α MAPK, Hsp60, and downregulation of Hsp27 are the indicators for the detection of oxidative damage, apoptosis, and mitochondrial stress was also modulated by CA. These findings reveal that CA supplementation has a protective effect against fluoride induced hepatotoxicity in rats.

  17. Community-oriented administration of fluoride for the prevention of dental caries

    DEFF Research Database (Denmark)

    Petersen, P E; Baez, R J; Lennon, M A

    2012-01-01

    Dental caries is the most prevalent chronic disease affecting human populations around the world. It is recognized that fluoride plays a significant role in dental caries reduction. Meanwhile, several low- and middle-income countries of Asia have not yet implemented systematic fluoride programs...... coverage. Participants acknowledged that automatic fluoridation through water, salt, and milk is the most effective and equitable strategy for the prevention of dental caries. Concerns were expressed that government-subsidized community fluoride prevention programs may face privatization. In addition...... need further dissemination. The meeting was co-sponsored by the World Health Organization, the International Association for Dental Research, and the World Dental Federation....

  18. Effects of Fluoride on Lipid Peroxidation, DNA Damage and Apoptosis in Human Embryo Hepatocytes

    Institute of Scientific and Technical Information of China (English)

    AI-GUO WANG; TAO XIA; QI-LONG CHU; MING ZHANG; FANG LIU; XUE-MIN CHEN; KE-DI YANG

    2004-01-01

    Objective To investigate the effects of fluoride on lipid peroxidation, DNA damage and apoptosis in human embryo hepatocyte L-02 cells. Methods Lipid peroxide (LPO) level, reduced glutathione (GSH) content, DNA damage, apoptosis, and cell cycle analysis were measured after in vitro cultured L-02 cells were exposed to sodium fluoride at different doses (40 μg/mL, 80 μg/mL, and 160 μg/mL) for 24 hours. Results Fluoride caused an increase of LPO levels and a decrease of GSH content in L-02 cells. There appeared to be an obvious dose-effect relationship between the fluoride concentration and the observed changes. Fluoride also caused DNA damage and apoptosis and increased the cell number in S phase of cell cycle in the cells tested. There was a statistically significant difference in DNA damage and apoptosis when comparing the high dose of fluoride treated cells with the low dose of fluoride treated cells. Conclusion Fluoride can cause lipid peroxidation, DNA damage, and apoptosis in the L-02 cell experimental model and there is a significant positive correlation between fluoride concentration and these pathological changes.

  19. Fluoride removal from groundwater by limestone treatment in presence of phosphoric acid.

    Science.gov (United States)

    Gogoi, Sweety; Nath, Suresh K; Bordoloi, Shreemoyee; Dutta, Robin K

    2015-04-01

    Fluoride removal from groundwater has been studied by addition of dilute phosphoric acid (PA) to the influent water before limestone treatment through laboratory plug-flow column experiments and bench-scale plug-flow pilot tests. In this PA-enhanced limestone defluoridation (PAELD) technique, fluoride is removed from 0.526 mM to 0.50-52.60 μM in 3 h with near neutral final pH. The presence of PA increases the fluoride removal capacity of limestone to 1.10 mg/g compared to 0.39 mg/g reported in its absence. The changes in fluoride removal with variation in initial PA concentration, initial fluoride concentration and the final pH have been found to be statistically significant with p < 0.05. The estimated recurring cost is US$ ≈0.58/m(3) water. Simple scrubbing and rinsing is a preferable method for regeneration of limestone as it is almost equally effective with lime or NaOH. Sorption of fluoride by calcium phosphates produced in situ in the reactor is the dominant mechanism of fluoride removal in the PAELD. Precipitation of CaF2 and sorption of fluoride by the limestone also contribute to the fluoride removal. High efficiency, capacity, safety, environment-friendliness, low cost and simplicity of operation make the PAELD a potential technique for rural application.

  20. Health effects of indoor fluoride pollution from coal burning in China

    Energy Technology Data Exchange (ETDEWEB)

    Ando, M.; Tadano, M.; Asanuma, S.; Tamura, K.; Matsushima, S.; Watanabe, T.; Kondo, T.; Sakurai, S.; Ji, R.D.; Liang, C.K.; Cao, S.R. [National Institute of Environmental Studies, Osaka (Japan). Division of Regional Environment

    1998-05-01

    The combustion of high fluoride-content coal as an energy resource for heating, cooking, and food drying is a major exhaust emission source of suspended particulate matter and fluoride. High concentrations of these pollutants have been observed in indoor air of coal-burning families in some rural areas in China. Because airborne fluoride has serious toxicological properties, fluoride pollution in indoor air and the prevalence of fluorosis have been analyzed in a fluorosis area and a healthy nonfluorosis area in China and in a rural area in Japan. In the fluorosis area in China, concentrations of urinary fluoride in the residents were much higher than in the nonfluorosis area in China and in the rural area in Japan. In the fluorosis area, almost all elementary and junior high school students 10-15 years of age had dental fluorosis. Osteosclerosis in the skeletal fluorosis patients was serious. Urinary deoxypyridinoline in rural residents in China was much higher than in rural residents in Japan. Data suggest that fluoride may stimulate both bone resorption and bone formation. Because indoor fluoride from combustion of coal is easily absorbed in stored food and because food consumption is a main source of fluoride exposure, it is necessary to reduce airborne fluoride and food contamination to prevent serious fluorosis in China.

  1. Plaque growth-inhibiting effects of an abrasive fluoride-chlorhexidine toothpaste and a fluoride toothpaste containing oxidative enzymes.

    Science.gov (United States)

    Etemadzadeh, H; Ainamo, J; Murtomaa, H

    1985-08-01

    The aim of this 4 times cross-over double-blind clinical trial was to test the plaque-inhibiting effect of 2 fluoride-containing toothpastes. One toothpaste contained 0.8% chlorhexidine together with amine fluoride (0.1% F degrees) and a suitable abrasive agent. The other contained 1.7 U/g glucose oxidase and 8.0 U/g amyloglucosidase, added to an amine fluoride (0.1% F degrees) toothpaste. 1% Hibitane dental gel was used as a positive and a conventional fluoride toothpaste (Vademecum MFP Fluor) as a negative control. 9 dental students, in a randomized sequence, applied the 4 dentifrices twice daily from Monday afternoon to Friday morning with cap splints, designed to cover the teeth and about 2 mm of gingiva. No other oral hygiene measures were allowed during the 4 test periods. On Fridays, the teeth were cleaned professionally and good oral hygiene was maintained during the week-ends. At the beginning and at the end of each test period, per student plaque thickness was recorded using the plaque index, the visible plaque index, and plaque fresh weight as parameters, and the area of plaque as related to the area of the tooth surface was recorded planimetrically and according to the PLQ index. The best plaque growth-inhibiting effect was recorded for the positive control (CHX) with the test chlorhexidine toothpaste (TX) as next best. The enzyme-containing toothpaste (TE) did not differ significantly from the negative control (C). All the significant differences in anti-plaque effect between the 4 toothpastes were obtained by recordings of plaque thickness and none on the basis of area of plaque.

  2. Fluoride release and bioactivity evaluation of glass ionomer: Forsterite nanocomposite

    Directory of Open Access Journals (Sweden)

    Fatemeh Sadat Sayyedan

    2013-01-01

    Full Text Available Background: The most important limitation of glass ionomer cements (GICs is the weak mechanical properties. Our previous research showed that higher mechanical properties could be achieved by addition of forsterite (Mg 2 SiO 4 nanoparticles to ceramic part of GIC. The objective of the present study was to fabricate a glass ionomer- Mg 2 SiO 4 nanocomposite and to evaluate the effect of addition of Mg 2 SiO 4 nanoparticles on bioactivity and fluoride release behavior of prepared nanocomposite. Materials and Methods: Forsterite nanoparticles were made by sol-gel process. X-ray diffraction (XRD technique was used in order to phase structure characterization and determination of grain size of Mg 2 SiO 4 nanopowder. Nanocomposite was fabricated via adding 3wt.% of Mg 2 SiO 4 nanoparticles to ceramic part of commercial GIC (Fuji II GC. Fluoride ion release and bioactivity of nanocomposite were measured using the artificial saliva and simulated body fluid (SBF, respectively. Bioactivity of specimens was investigated by Fourier transitioned-infrared spectroscopy (FTIR, scanning electronmicroscopy (SEM, Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES and registration of the changes in pH of soaking solution at the soaking period. Statistical analysis was carried out by one Way analysis of variance and differences were considered significant if P < 0.05. Results: The results of XRD analysis confirmed that nanocrystalline and pure Mg 2 SiO 4 powder was obtained. Fluoride ion release evaluation showed that the values of released fluoride ions from nanocomposite are somewhat less than Fuji II GC. SEM images, pH changes of the SBF and results of the ICP-OES and FTIR tests confirmed the bioactivity of the nanocomposite. Statistical analysis showed that the differences between the results of all groups were significant (P < 0.05. Conclusion: Glass ionomer- Mg 2 SiO 4 nanocomposite could be a good candidate for dentistry and orthopedic

  3. Benefits of a silica-based fluoride toothpaste containing o-cymen-5-ol, zinc chloride and sodium fluoride.

    Science.gov (United States)

    Newby, Craig S; Rowland, Joanna L; Lynch, Richard J M; Bradshaw, David J; Whitworth, Darren; Bosma, Mary Lynn

    2011-08-01

    Fluoride toothpastes in conjunction with tooth brushing are used to clean teeth, control plaque build-up and for anti-caries benefits. Toothpastes are designed with attractive flavours and appearances to encourage regular prolonged use to maximise these benefits. The incorporation of additional ingredients into toothpaste is a convenient way to provide supplementary protection that fits into people's everyday oral care routine. Such ingredients should not compromise the primary health benefits of toothpaste nor discourage its use. o-Cymen-5-ol and zinc chloride have been incorporated into a sodium fluoride (NaF)/silica toothpaste at 0.1%w/w and 0.6%w/w respectively to provide additional benefits. These include improved gingival health maintenance, in terms of the reduction of plaque, gingival index and bleeding, and an immediate and long lasting reduction in volatile sulfur compounds (VSCs) measured on breath. These benefits can be attributed to the antimicrobial and neutralisation actions of the toothpaste. The use of established fluoride models demonstrated no compromise in NaF bioavailability. The toothpaste was formulated without compromising product aesthetics. The combination of o-cymen-5-ol and zinc chloride in toothpaste gave superior maintenance of gingival health and reduction in malodour related VSCs without compromising the primary health benefits of the toothpaste or diminishing attributes preferred for the product's use.

  4. Screening biological traits and fluoride contents of native vegetations in arid environments to select efficiently fluoride-tolerant native plant species for in-situ phytoremediation.

    Science.gov (United States)

    Boukhris, Asma; Laffont-Schwob, Isabelle; Mezghani, Imed; El Kadri, Lefi; Prudent, Pascale; Pricop, Anca; Tatoni, Thierry; Chaieb, Mohamed

    2015-01-01

    High fluoride pollution has been detected in the surrounding soils of the coastal superphosphate industries in the Gulf of Gabes (Southeast of Tunisia). A study was conducted in vicinity of factories analysing plant functional traits combined with plant fluoride accumulation and soil metal concentrations aiming to screen more efficiently native plant species tolerant to this pollution. Aerial parts of 18 plant species out of the 10 most abundant species per site were harvested on two polluted sites of Gabes and Skhira at the vicinity of the factories and on the less polluted site of Smara. Native plant species accumulated fluoride following the gradient of soil pollution. Fluoride contents of plant aerial parts ranged from 37 mg kg(-1) to 360 mg kg(-1) and five plant species were only found in the most polluted site. However these latter had low biomass and soil cover. Crossing biological traits and fluoride contents, a selection grid for potentially restorative plant species enabled the selection of three native perennials i.e. Rhanterium suaveolens, Atractylis serratuloides and, Erodium glaucophyllum as potential candidates for an in-situ phytoremediation program on arid fluoride-polluted sites. This approach may be used in other fluoride-polluted Mediterranean environments.

  5. Sensitivity of two biomarkers for biomonitoring exposure to fluoride in children and women: A study in a volcanic area.

    Science.gov (United States)

    Linhares, Diana Paula Silva; Garcia, Patrícia Ventura; Amaral, Leslie; Ferreira, Teresa; Cury, Jaime A; Vieira, Waldomiro; Rodrigues, Armindo Dos Santos

    2016-07-01

    The natural enrichment of water with fluoride is related to natural sources such as volcanic activity, with it being documented that fluorosis, an endemic and widespread disease in volcanic areas, is associated to the ingestion of high levels of fluoride through water. Thus, in this study, we aimed to define the fluoride concentration in drinking waters of volcanic origin and compare the sensitivity of urine and nail clippings as biomarkers for fluoride exposure in adults and children. Samples of drinking water from four villages in São Miguel Island (Azores) were used and the fluoride concentration was determined, as well the fluoride content in urine and toenails clippings from 66 children and 63 adults from these villages. A validated diet questionnaire, assessing sources of fluoride, was recorded for each participant. The fluoride determination in urine and nail clipping samples was made using a fluoride-specific electrode. A positive correlation was found between the fluoride daily intake and fluoride content in children urine (rs = 0.475; p < 0.001) and in their nail clippings (rs = 0.475; p < 0.001), while in adult women, the fluoride daily intake correlated positively with fluoride content nail clippings (rs = 0.495, p < 0.001). This reveals that nail clippings are more reliable as biomarkers of chronic exposure to fluoride than urine for populations of different ages (children vs. adults). Furthermore, nail clippings are more suitable than urine fluoride levels to assess long term exposure to fluoride in areas where the exposure to fluoride in drinking water is considered within, or slightly above, the recommended legal values.

  6. Comparative study of fluoride released and recharged from conventional pit and fissure sealants versus surface prereacted glass ionomer technology

    Directory of Open Access Journals (Sweden)

    Elias Nahum Salmerón-Valdés

    2016-01-01

    Full Text Available Context: The fluoride release of sealants in vitro shows a marked decrease. Giomers are distinguishable from manufactured resin-based sealants and contain prereacted glass-ionomer particles (PRG. Aims: To compare the amounts of fluoride released from the main pit and fissure of a resin-based sealant with that from a Giomer and to assess the abilities of the sealant and the Giomer to recharge when exposed to regular use of fluoride rinse. Materials and Methods: The readings for the fluoride concentration were carried out for 60 days using a fluoride ion-specific electrode. After this period, the samples were recharged using a fluoride mouth rinse. The amount of fluoride released after this recharge was determined for 5 days. The data were analyzed using Student′s t- and analysis of variance tests. Results: In general, all materials presented higher fluoride release in the first 24 h; G1 and G4 showed a higher fluoride release in this period. On the other hand, G3 and G1 presented the most constant fluoride release until the 8 th day, wherein all the sealants considerably decreased in the amount of fluoride released. Conclusion: G1 and G3 released higher concentrations of fluoride, although no significant differences were found. Giomers recharged in the first 24 h after polymerization presented an improved and sustained fluoride release.

  7. Enhancement of luminescence in white emitting strontium fluoride core @ calcium fluoride shell nanoparticles.

    Science.gov (United States)

    Kumam, Nandini; Singh, Ningthoujam Premananda; Singh, Laishram Priyobarta; Srivastava, Sri Krishna

    2015-12-01

    Synthesis of lanthanide-doped fluoride SrF2:3Dy and SrF2:3Dy@CaF2 nanoparticles with different ratios of core to shell (1:0.5, 1:1 and 1:2) has been carried out by employing ethylene glycol route. X-ray diffraction (XRD) patterns reveal that the structure of the prepared nanoparticles was of cubical shape, which is also evident in TEM images. The size of the nanoparticles for core (SrF2:3Dy) is found to increase when core is covered by shell (CaF2). It is also evident from Fourier transform infrared spectroscopy (FTIR) that ethylene glycol successfully controls the growth and acts as a shape modifier by regulating growth rate. In the photoluminescence investigation, emission spectra of SrF2:3Dy is found to be highly enhanced when SrF2:3Dy is covered by CaF2 due to the decrease of cross relaxation amongst the Dy(3+)-Dy(3+) ions. Such type of enhancement of luminescence in homonanostructure SrF2:3Dy@CaF2 (core@shell) has not been studied so far, to the best of the authors' knowledge. This luminescent material exhibits prominently white light emitting properties as shown by the Commission Internationale d'Eclairage (CIE) chromaticity diagram. The calculated correlate colour temperature (CCT) values for SrF2:3Dy, SrF2:3Dy@CaF2 (1:0.05), SrF2:3Dy@CaF2 (1:1) and SrF2:3Dy@CaF2 (1:2) are 5475, 5476, 5384 and 5525 K, respectively, which lie in the cold white region. Graphical abstract White light emitting homonanostructure material SrF2:3Dy@CaF2(core@shell).

  8. Fluoride influences nickel-titanium orthodontic wires' surface texture and friction resistance

    Science.gov (United States)

    Abbassy, Mona Aly

    2016-01-01

    Objectives: The aim of this study was to investigate the effects exerted by the acidulated fluoride gel on stainless steel and nickel-titanium (Ni-Ti) orthodontic wires. Materials and Methods: Sixty stainless steel and Ni-Ti orthodontic archwires were distributed into forty archwires used for in vitro study and twenty for in situ study. Fluoride was applied for 1 h in the in vitro experiment while it was applied for 5 min in the in situ experiment. The friction resistance of all wires with ceramic brackets before/after topical fluoride application was measured using a universal testing machine at 1 min intervals of moving wire. Moreover, surface properties of the tested wires before/after fluoride application and before/after friction test were examined by a scanning electron microscope (SEM). Dunnett's t-test was used to compare frictional resistance of as-received stainless steel wires and Ni-Ti wires to the wires treated by fluoride in vitro and in situ (P < 0.05). Two-way ANOVA was used to compare the effect of fluoride application and type of wire on friction resistance in vitro and in situ (P < 0.05). Results: Ni-Ti wires recorded significantly high friction resistance after fluoride application when compared to stainless steel wires in vitro, P < 0.05. Fluoride application did not significantly affect the friction resistance of the tested wires in situ, P < 0.05. SEM observation revealed deterioration of the surface texture of the Ni-Ti wires after fluoride application in vitro and in situ. Conclusions: The in vitro fluoride application caused an increase in friction resistance of Ni-Ti wires when compared to stainless steel wires. In vitro and in situ fluoride application caused deterioration in surface properties of Ni-Ti wires. PMID:27843886

  9. Geochemical evaluation of fluoride contamination of groundwater in the Thoothukudi District of Tamilnadu, India

    Science.gov (United States)

    Singaraja, C.; Chidambaram, S.; Anandhan, P.; Prasanna, M. V.; Thivya, C.; Thilagavathi, R.; Sarathidasan, J.

    2014-09-01

    Fluoride is a chemical element that has been shown to cause significant effects on human health through drinking water. Different forms of fluoride exposure are of importance and have shown to affect the body's fluoride content and thus increasing the risks of fluoride-prone diseases. Fluoride has beneficial effects on teeth; however, low concentrations of fluoride intensify the risk of tooth decay. Fluoride can also be quite detrimental at higher concentrations at skeletal fluorosis. The Thoothukudi District is a hard rock and alluvial plain marked as one of the Fluoride-increase area in Tamilnadu due to occurrence of various rock types including fluoride-bearing minerals. The F- content of groundwater can thus originate from the dissolution of Fluoride-bearing minerals in the bed rock. Hundred representative groundwater samples from Thoothukudi District were collected during two different seasons. Samples were analysed for F-, other major cations and anions. The study area is chiefly composed of hornblende biotite gneiss, charnockite, alluvio marine, fluvial marine and granite with small patches of quartzite and sandstone. Higher concentration of fluoride is observed during pre-monsoon (3.3 mg l-1) compared to the post-monsoon (2.4 mg l-1) due to the dilution effect. Spatial distribution and factor score show that higher concentrations of F- are noted in the north and central part of the study area owing to lithology. Bicarbonate is well correlated with F- which explains that both ions were derived from the weathering. While F- has a very weak correlation with pH which may be due to the increase of alkalinity resulting from the increase of carbonate and bicarbonate ions.

  10. Effects of fluoride in drinking water on health of deciduous teeth

    Directory of Open Access Journals (Sweden)

    Blagojević Duška

    2004-01-01

    Full Text Available INTRODUCTION High incidence of decayed deciduous teeth, as well as lack of adequate therapy, makes tooth decay prevention very important. One of the simplest ways to reduce tooth decay is fluoridation of drinking water. The optimal concentration of fluoride in drinking water is 1 ppm/l, and many waters naturally contain this quantity. Waters in Vojvodina are mainly poor in fluoride, except in a few regions. It has long been postulated that fluoride has a prophyilactic effect during intrauterine life. Today a theory of greater local impact of fluoride as well as its role in de- and remineralization of solid tooth tissue. Material and methods This epidemiologocal study was performed in the area of Vojvodina, in places with various fluoride concentrations in drinking water (0.18 - 1.04 ppm/l. Dental examination was performed among 145 children, 6 years of age. For tooth decay detection dmf index was used. Results and discussion In places with low and optimal fluoride concentration in drinking water the percentage of children with decayed teeth is different, but without statistical significance. The percentage of affected deciduous teeth is high in all places. In places with low fluoride concentration it is 24.2 - 32.3%, in places with optimal concentration is 27 - 32%. Everidge value DMF in all places is between 4.7 - 6.4. These results show that optimal fluoride concentration in drinking water decreases the incidence of tooth decay, but this difference is not significant. CONCLUSION Presence of fluoride in drinking water doesn't affect health of deciduous teeth. Decreased incidence of decayed deciduous teeth can be achieved only with combined usage of fluoride (local and systemic, as well as with an intensive health education program.

  11. Matrix supported tailored polymer for solid phase extraction of fluoride from variety of aqueous streams

    Energy Technology Data Exchange (ETDEWEB)

    Thakur, Neha; Kumar, Sanjukta A.; Wagh, D.N. [Analytical Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Das, Sadananda; Pandey, Ashok K. [Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Kumar, Sangita D., E-mail: sangdk@barc.gov.in [Analytical Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Reddy, A.V.R. [Analytical Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)

    2012-01-30

    Highlights: Black-Right-Pointing-Pointer Th complexed with poly (bis[2-(methacryloyloxy)-ethyl]phosphate) as tailored polymer membranes. Black-Right-Pointing-Pointer Membranes offered high capacity and selectivity for fluoride in aqueous media. Black-Right-Pointing-Pointer Quantitative uptake (80 {+-} 5%) of fluoride. Black-Right-Pointing-Pointer Fast sorption kinetics. Black-Right-Pointing-Pointer Reusability of polymer membranes. - Abstract: Fluoride related health hazards (fluorosis) are a major environmental problem in many regions of the world. It affects teeth; skeleton and its accumulation over a long period can lead to changes in the DNA structure. It is thus absolutely essential to bring down the fluoride levels to acceptable limits. Here, we present a new inorganic-organic hybrid polymer sorbent having tailored fixed-sites for fluoride sorption. The matrix supported poly (bis[2-(methacryloyloxy)-ethyl]phosphate) was prepared by photo-initiator induced graft-polymerization in fibrous and microporous (sheet) host poly(propylene) substrates. These substrates were conditioned for selective fluoride sorption by forming thorium complex with phosphate groups on bis[2-methacryloyloxy)-ethyl] phosphate (MEP). These tailored sorbents were studied for their selectivity towards fluoride in aqueous media having different chemical conditions. The fibrous sorbent was found to take up fluoride with a faster rate (15 min for Almost-Equal-To 76% sorption) than the sheet sorbent. But, the fluoride loading capacity of sheet sorbent (4320 mg kg{sup -1}), was higher than fibrous and any other sorbent reported in the literature so far. The sorbent developed in the present work was found to be reusable after desorption of fluoride using NaOH solution. It was tested for solid phase extraction of fluoride from natural water samples.

  12. Analysis of the Role of Insulin Signaling in Bone Turnover Induced by Fluoride.

    Science.gov (United States)

    Liu, Qinyi; Liu, Hui; Yu, Xiuhua; Wang, Yan; Yang, Chen; Xu, Hui

    2016-06-01

    The role of insulin signaling on the mechanism underlying fluoride induced osteopathology was studied. We analyzed the expression of genes related with bone turnover and insulin signaling in rats treated by varying dose of fluoride with or without streptozotocin (STZ) in vivo. Furthermore, insulin receptor (InR) expression in MC3T3-E1 cells (pre-osteoblast cell line) was interfered with small interfering RNA (siRNA), and genes related with osteoblastic and osteoclastic differentiation were investigated in cells exposed to fluoride in vitro for 2 days. The in vivo study indicated the possible role of insulin in bone lesion induced by excessive amount of fluoride. Fluoride activated the InR and Insulin-like growth factor 1 (IGF1) signaling, which were involved in the mechanism underlying fluoride induced bone turnover. The TGFβ1 and Wnt10/β-catenin pathway took part in the mechanism of bone lesion induced by fluoride, and insulin probably modulated the TGFβ1 and β-catenin to exert action on bone turnover during the development of bone lesion. The in vitro study showed the concomitant decrease of OPG, osterix and OCN with inhibition of InR expression in osteoblast, and three genes still was low in cells co-treated with fluoride and InR siRNA, which suggested that fluoride probably stimulated the expression of OPG, osterix and OCN through InR signaling. In conclusion, insulin played the important role in bone lesion induced by excessive amount of fluoride through mediating InR receptor signaling, and IGF1 signaling probably exerted action on bone turnover caused by overdose of fluoride.

  13. Controlling Magnetic and Ferroelectric Order Through Geometry: Synthesis, Ab Initio Theory, Characterization of New Multi-Ferric Fluoride Materials

    Energy Technology Data Exchange (ETDEWEB)

    Halasyamani, Shiv [Univ. of Houston, TX (United States); Fennie, Craig [Cornell Univ., Ithaca, NY (United States)

    2016-11-03

    We have focused on the synthesis, characterization, and ab initio theory on multi-functional mixed-metal fluorides. With funding from the DOE, we have successfully synthesized and characterized a variety of mixed metal fluoride materials.

  14. Fluoride Release From Three Different Types of Giass- lonomer Cements After Exposure to Acidic and Neutral NaF Solution

    Directory of Open Access Journals (Sweden)

    Kousari A

    2000-06-01

    Full Text Available The purpose of this study was to assess the fluoride release of three fluoride- containing materials exposed to fluoride solutions. This study compared the initial fluoride release and release following re-fluoridation (neutral or acidic 2% NaF of three different filling materials, conventional glass ionomer cement (CG1C, resin- modified glass ionomer cement (RMGIC, polyacid- modified composite resin (PAMCR. Twenty discs of each material, measuring 2mm height and 6mm diameter, were suspended in separate vials of 2" laboratory artificial saliva. The amount of fluoride release was measured over two periods of 28 days each. Fluoride release was determined at 1,3,7,14 and 28 days of each period. Fluoride was measured with a fluoride ion- specific electrode and an ion analyzer previously calibrated with standard solution .T- test and ANOVA were used to evaluate the data. Fluoride release for all products at days 1 and 3 was significantly greater than the rest of the time intervals. Then, the fluoride release decreased significantly. CGIC released significantly more fluoride than the other products. This was followed by RMGIC, which exhibited significantly more fluoride release than PAMCR. In second period of experiment, the specimens were assigned to two subgroups often each. The samples exposed to two different solution of NaF (neutral or acidic. All groups showed the capacity of re-fluoridation and fluoride uptake. The specimens exposed to acidic NaF solution showed statistically more significant rechargeability than the neutral NaF solution. It may be concluded that glass ionomer cements act as a rechargeable slow fluoride release systems and as an effective caries preventive material in caries preventing programs for caries susceptible children.

  15. Permeability of eroded enamel following application of different fluoride gels and CO2 laser.

    Science.gov (United States)

    Lepri, Taísa Penazzo; Colucci, Vivian; Turssi, Cecília Pedroso; Corona, Silmara Aparecida Milori

    2013-01-01

    This study evaluated the combined effect of fluoride compounds and CO(2) laser in controlling the permeability of eroded enamel. Bovine enamel slabs (3 × 2 mm) were cycled twice through an alternating erosion and remineralization regimen. Slabs were immersed in 20 ml of orange juice (pH 3.84) for 5 min under agitation, rinsed with deionized water, and stored in artificial saliva for 4 h to form erosive lesions. Specimens were then divided into four groups (n = 10), which were treated for 1 min with either a control or with one of the following gels: amine fluoride (AmF), titanium tetrafluoride (TiF(4)), or sodium fluoride (NaF). Half of the specimens were irradiated with a CO(2) laser (λ = 10.6 μm; 2.0 W). Specimens were cycled two more times through the aforementioned erosion-remineralization regimen and were subjected to permeability assessment. ANOVA demonstrated a significant interaction between fluoride and laser treatment (p = 0.0152). Tukey's test showed that when fluoride was applied alone, TiF(4) resulted in lower enamel permeability than that observed after application of the placebo gel. Intermediate permeability values were noted after NaF and AmF had been used. A significant reduction in enamel permeability was obtained when fluoride was combined with CO(2) laser treatment, with no difference between fluoride gels. Permeability of eroded enamel may be reduced by combining the application of fluoride gels with CO(2) laser irradiation.

  16. 40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.

    Science.gov (United States)

    2010-07-01

    ... (mg/l) of fluoride may develop cosmetic discoloration of their permanent teeth (dental fluorosis). The drinking water provided by your community water system has a fluoride concentration of mg/l. Dental fluorosis, in its moderate or severe forms, may result in a brown staining and/or pitting of the...

  17. FORMATION OF PHOSPHATE-CONTAINING CALCIUM-FLUORIDE AT THE EXPENSE OF ENAMEL, HYDROXYAPATITE AND FLUORAPATITE

    NARCIS (Netherlands)

    CHRISTOFFERSEN, J; CHRISTOFFERSEN, MR; ARENDS, J; LEONARDSEN, ES

    1995-01-01

    During the caries process complex reactions involving calcium, phosphate, hydrogen and fluoride ions as main species take place. In this study the precipitation and dissolution reactions occurring in suspensions of enamel, hydroxyapatite (HAP) and fluorapatite (FAP) on addition of fluoride were inve

  18. JNK and NADPH Oxidase Involved in Fluoride-Induced Oxidative Stress in BV-2 Microglia Cells

    Directory of Open Access Journals (Sweden)

    Ling Yan

    2013-01-01

    Full Text Available Excessive fluoride may cause central nervous system (CNS dysfunction, and oxidative stress is a recognized mode of action of fluoride toxicity. In CNS, activated microglial cells can release more reactive oxygen species (ROS, and NADPH oxidase (NOX is the major enzyme for the production of extracellular superoxide in microglia. ROS have been characterized as an important secondary messenger and modulator for various mammalian intracellular signaling pathways, including the MAPK pathways. In this study we examined ROS production and TNF-α, IL-1β inflammatory cytokines releasing, and the expression of MAPKs in BV-2 microglia cells treated with fluoride. We found that fluoride increased JNK phosphorylation level of BV-2 cells and pretreatment with JNK inhibitor SP600125 markedly reduced the levels of intracellular and NO. NOX inhibitor apocynin and iNOS inhibitor SMT dramatically decreased NaF-induced ROS and NO generations, respectively. Antioxidant melatonin (MEL resulted in a reduction in JNK phosphorylation in fluoride-stimulated BV-2 microglia. The results confirmed that NOX and iNOS played an important role in fluoride inducing oxidative stress and NO production and JNK took part in the oxidative stress induced by fluoride and meanwhile also could be activated by ROS in fluoride-treated BV-2 cells.

  19. Erosion-inhibiting effect of sodium fluoride and titanium tetrafluoride treatment in vitro

    NARCIS (Netherlands)

    Rijkom, Hans van; Ruben, J.; Vieira, A.; Huysmans, M.C.; Truin, G-J.; Mulder, J.

    2003-01-01

    The prevention of dental erosion with fluoride is still largely unknown territory. It was the aim of this study to determine the erosion-inhibiting effect of topical neutral 1% sodium fluoride (NaF) application and an application of a 4% titanium tetrafluoride (TiF4) solution compared with no treatm

  20. Assessment of fluoride contaminations in groundwater of hard rock aquifers in Madurai district, Tamil Nadu (India)

    Science.gov (United States)

    Thivya, C.; Chidambaram, S.; Rao, M. S.; Thilagavathi, R.; Prasanna, M. V.; Manikandan, S.

    2015-07-01

    The fluoride contamination in drinking water is already gone to the alarming level and it needs the immediate involvement and attention of all people to solve this problem. Fluoride problem is higher in hard rock terrains in worldwide and Madurai is such type of hard rock region. Totally 54 samples were collected from the Madurai district of Tamilnadu with respect to lithology. The samples collected were analysed for major cations and anions using standard procedures. The higher concentration of fluoride is noted in the Charnockite rock types of northern part of the study area. 20 % of samples are below 0.5 ppm and 6 % of samples are above 1.5 ppm exceeding the permissible limit. The affinity between the pH and fluoride ions in groundwater suggests that dissolution of fluoride bearing minerals in groundwater. The higher concentration of fluoride ions are observed in the lower EC concentration. The isotopic study suggests that fluoride is geogenic in nature. In factor scores, fluoride is noted in association with pH which indicates the dissolution process.

  1. Preventing Tooth Decay: A Guide for Implementing Self-Applied Fluoride in Schools.

    Science.gov (United States)

    National Inst. of Dental Research (NIH), Bethesda, MD.

    This guidebook was developed to assist citizens in initiating programs to prevent tooth decay in young children through the use of fluoridation. It contains outlines for determining the needs of the school and community for fluoride in drinking water, and presents the various steps and activities that are necessary for developing and implementing…

  2. Poly(vinylidene fluoride)/nickel nanocomposites from semicrystalline block copolymer precursors

    NARCIS (Netherlands)

    Voet, V.S.D.; Tichelaar, M.; Tanase, S.; Mittelmeijer-Hazeleger, M.C.; ten Brinke, G.; Loos, K.

    2013-01-01

    The fabrication of nanoporous poly(vinylidene fluoride) (PVDF) and PVDF/nickel nanocomposites from semicrystalline block copolymer precursors is reported. Polystyrene-block-poly(vinylidene fluoride)-block-polystyrene (PS-b-PVDF-b-PS) is prepared through functional benzoyl peroxide initiated polymeri

  3. Fluoride in the prevention and treatment of glucocorticoid-induced osteoporosis

    NARCIS (Netherlands)

    Lems, WF; Jacobs, JWG; Bijlsma, JWJ

    2000-01-01

    Since the use of fluoride has been shown to stimulate bone formation and since decreased bone formation is a key feature in the pathogenesis of corticosteroid-induced osteoporosis (CIOP), fluoride is, at least theoretically, attractive for the prevention and treatment of CIOP. In postmenopausal wome

  4. The Effect of Carbon Source and Fluoride Concentrations in the "Streptococcus Mutans" Biofilm Formation

    Science.gov (United States)

    Paulino, Tony P.; Andrade, Ricardo O.; Bruschi-Thedei, Giuliana C. M.; Thedei, Geraldo, Jr.; Ciancaglini, Pietro

    2004-01-01

    The main objective of this class experiment is to show the influence of carbon source and of different fluoride concentrations on the biofilm formation by the bacterium "Streptococcus mutans." The observation of different biofilm morphology as a function of carbon source and fluoride concentration allows an interesting discussion regarding the…

  5. THE EFFECT OF FLUORIDE ON THE EFFECTIVENESS OF CONVENTIONAL COAGULATION/FLOCCULATION/SEDIMENTATION USING ALUMINUM SULFATE

    Science.gov (United States)

    The Safe Drinking Water Act states that no drinking water facility is reuqired to fluoridate their water, however, any facility fluoridating their water is bound by the Maximum contaminant Level (MCL) of 4 mg/L. A survey of 600 large water utilities was conducted in conjunction w...

  6. Geochemical factors controlling the occurrence of high fluoride groundwater in the Nagar Parkar area, Sindh, Pakistan.

    Science.gov (United States)

    Rafique, Tahir; Naseem, Shahid; Usmani, Tanzil Haider; Bashir, Erum; Khan, Farooque Ahmed; Bhanger, Muhammad Iqbal

    2009-11-15

    Fluoride concentrations in groundwater near Nagar Parkar in the Thar Desert of southeastern Pakistan range from 1.13 to 7.85 mg/l, and roughly 78% of the samples contain fluoride in concentrations that exceed the drinking water standard of 1.5mg/l set by WHO. The groundwater is alkaline (pH 7.1-8.4), brackish (TDS 449-15,933 mg/l), and classified as Na-Cl type water. This prevailing chemical character reflects the influence of saltwater intrusion, high evaporation rates, and ion exchange. Groundwater is also supersaturated with respect to calcite, which promotes the removal of Ca(2+) and HCO(3)(-) from solution. As a result, groundwater is generally undersaturated with respect to fluorite, the mineral that typically controls the upper limit of fluoride concentrations. This study examines a number of geochemical parameters in an effort to discover the controls on fluoride concentrations in groundwater. High fluoride concentrations are associated with high TDS, high pH, high Na concentrations, and high sodium absorption ratios (SAR). This suggests that elevated fluoride levels are the result of enhanced fluorite solubility due to Ca depletion and high ionic strength and the release of fluoride from colloid surfaces under high pH conditions. Contrary to what has been found in other studies, sample depth and water temperature do not appear to have a significant role in the distribution of fluoride within the groundwater.

  7. Impact and remedial strategy of Fluoride in Ground Water – A Review

    Directory of Open Access Journals (Sweden)

    Bhagwan yadav

    2014-02-01

    Full Text Available According to WHO report 20% of the fluoride-affected villages in the whole world are in India, viz 33,231 villages are affected by fluoride in the country. Drinking water with excessive concentration of fluoride causes fluorosis which progresses gradually and becomes a crippling malady in the long run. It affects people of all age group, rich, rural, and urban population. It has attained a very alarming dimension. Rajasthan suffers both the problems of quantity and quality of water. In most part of the state groundwater is either saline or having high nitrates and fluoride content. Obviously, groundwater is the major source of drinking water and over 94% of the drinking water demand is met by groundwater. Fluoride concentrations beyond the standards cause dental and skeletal fluorosis. Fluoride toxicity can also cause non-skeletal diseases like aches and pain in the joints, non-ulcer dyspepsia, Polyurea and polydipsia, muscle weakness, fatigue, anemia with very low hemoglobin levels, etc besides other reasons. Many researchers have used various types of inexpensive and effective adsorption medium like clays, solid industrial wastes such as red mud, spent bleaching earths, spent catalysts and fly ash, activated alumina, carbonaceous materials, bone charcoal, natural and synthetic zeolites, etc. for the treatment of fluoride contamination. This paper presents a review, which focuses on the sources of fluoride in ground water, its impacts on health and different control measures.

  8. Some special features of the caries preventive effect of water-fluoridation

    NARCIS (Netherlands)

    Backer Dirks, O.; Houwink, B.; Kwant, G.W.

    1961-01-01

    In March 1953 water-fluoridation was started in Tiel, the Netherlands. From the caries numbers of three age classes the differences in caries inhibition for the various teeth and for the various tooth surfaces are shown after 5 1/2 of fluoridation. The free smooth surfaces (buccal and labial) show

  9. Exposure to Fluoride in Smelter Workers in a Primary Aluminum Industry in India

    Directory of Open Access Journals (Sweden)

    A Singh

    2013-04-01

    Full Text Available Background: Fluoride is used increasingly in a variety of industries in India. Emission of fluoride dust and fumes from the smelters of primary aluminum producing industries is dissipated in the work environment and poses occupational health hazards.Objective: To study the prevalence of health complaints and its association with fluoride level in body fluids of smelter workers in a primary aluminum producing industry.Methods: In an aluminum industry, health status of 462 smelter workers, 60 supervisors working in the smelter unit, 62 non-smelter workers (control group 1 and 30 administration staff (control group 2 were assessed between 2007 and 2009. Their health complaints were recorded and categorized into 4 groups: 1 gastro-intestinal complaints; 2 non-skeletal manifestations; 3 skeletal symptoms; and (4 respiratory problems. Fluoride level in body fluids, nails, and drinking water was tested by an ion selective electrode; hemoglobin level was tested using HemoCue.Results: The total complaints reported by study groups were significantly higher than the control groups. Smelter workers had a significantly (pConclusions: Industrial emission of fluoride is not the only important sources of fluoride exposure—consumption of substance with high levels of fluoride is another important route of entry of fluoride into the body. Measurement of hemoglobin provides a reliable indicator for monitoring the health status of employees at risk of fluorosis.

  10. Fluoride content of soft drinks, nectars, juices, juice drinks, concentrates, teas and infusions marketed in Portugal.

    Science.gov (United States)

    Fojo, C; Figueira, M E; Almeida, C M M

    2013-01-01

    A potentiometric method using a fluoride combination ion-selective electrode was validated and used to analyse 183 samples, including soft drinks, juices, nectars, juice drinks, concentrates, teas and infusions marketed in Portugal. The fluoride levels were higher in extract-based soft drinks, juice drinks and juice, with fluoride values of 0.86 ± 0.35, 0.40 ± 0.24 and 0.37 ± 0.11 mg l⁻¹, respectively. The lowest fluoride concentration was found in infusion samples (0.12 ± 0.01 mg l⁻¹), followed by teas and carbonated soft drinks with fluoride concentrations of 0.16 ± 0.12 and 0.18 ± 0.07 mg l⁻¹, respectively. Nectars, concentrates and juice-based drinks had similar fluoride concentrations of 0.33 ± 0.16, 0.29 ± 0.12 and 0.25 ± 0.14 mg l⁻¹, respectively. The fluoride concentrations in all these samples would only contribute intakes below the acceptable daily intake (ADI = 0.05 mg kg⁻¹ body weight day⁻¹), indicating that, individually, these beverages cannot induce fluoride toxicity in the population group of children.

  11. Selective Adsorption of Sodium Aluminum Fluoride Salts from Molten Aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Leonard S. Aubrey; Christine A. Boyle; Eddie M. Williams; David H. DeYoung; Dawid D. Smith; Feng Chi

    2007-08-16

    Aluminum is produced in electrolytic reduction cells where alumina feedstock is dissolved in molten cryolite (sodium aluminum fluoride) along with aluminum and calcium fluorides. The dissolved alumina is then reduced by electrolysis and the molten aluminum separates to the bottom of the cell. The reduction cell is periodically tapped to remove the molten aluminum. During the tapping process, some of the molten electrolyte (commonly referred as “bath” in the aluminum industry) is carried over with the molten aluminum and into the transfer crucible. The carryover of molten bath into the holding furnace can create significant operational problems in aluminum cast houses. Bath carryover can result in several problems. The most troublesome problem is sodium and calcium pickup in magnesium-bearing alloys. Magnesium alloying additions can result in Mg-Na and Mg-Ca exchange reactions with the molten bath, which results in the undesirable pickup of elemental sodium and calcium. This final report presents the findings of a project to evaluate removal of molten bath using a new and novel micro-porous filter media. The theory of selective adsorption or removal is based on interfacial surface energy differences of molten aluminum and bath on the micro-porous filter structure. This report describes the theory of the selective adsorption-filtration process, the development of suitable micro-porous filter media, and the operational results obtained with a micro-porous bed filtration system. The micro-porous filter media was found to very effectively remove molten sodium aluminum fluoride bath by the selective adsorption-filtration mechanism.

  12. Association of Higher Maternal Serum Fluoride with Adverse Fetal Outcomes

    Directory of Open Access Journals (Sweden)

    Gurumurthy M Sastry

    2011-04-01

    Full Text Available Background: Despite prevalence of fluorosis in India, previous studies did not emphasize on the effect of maternal fluorosis on fetal outcomes. Objectives: To study the associations of higher maternal serum Fluoride (F with low birth weight and poor APGAR count. Methods: One hundred and eight apparently healthy pregnant women aged 17-36 years were included in the study. Samples collected were maternal and cord blood, placenta and drinking and ground water. The samples were processed and analyzed for Fluoride. Fetal gestational age was measured on ultrasound scan and the birth weight of the baby on a digital scale. Fifth minute APGAR score was measured. Results: A significant negative correlation was found for maternal serum F vs Birth weight, Gestational Age and APGAR score. Significant negative correlations were also found for cord serum F vs Birth Weight, Gestational Age and APGAR score. Fairly negative correlations were also found for birth weight, APGAR score and Gestational age compared to Fluoride concentrations in maternal surface of placenta, fetal surface of placenta and marginal side of the placenta. However, significant positive correlations were observed when Gestational age was compared with Birth weight and APGAR score. When the maternal serum F was greater than 1 ppm, there was 10.58 times higher risk for low birth weight, 8.65 times higher risk for preterm delivery and 3.8 times higher risk for low APGAR score. When the cord serum F was greater than 0.22ppm, there was 2.76 times higher risk for low birth weight, 4.6 times higher risk for preterm delivery and 2.5 times higher risk for low APGAR score. Conclusion: With increased serum F in the mother, there is an inclination towards pre term delivery, low birth weight and poor APGAR count.

  13. Theoretical proton affinity and fluoride affinity of nerve agent VX.

    Science.gov (United States)

    Bera, Narayan C; Maeda, Satoshi; Morokuma, Keiji; Viggiano, Al A

    2010-12-23

    Proton affinity and fluoride affinity of nerve agent VX at all of its possible sites were calculated at the RI-MP2/cc-pVTZ//B3LYP/6-31G* and RI-MP2/aug-cc-pVTZ//B3LYP/6-31+G* levels, respectively. The protonation leads to various unique structures, with H(+) attached to oxygen, nitrogen, and sulfur atoms; among which the nitrogen site possesses the highest proton affinity of -ΔE ∼ 251 kcal/mol, suggesting that this is likely to be the major product. In addition some H(2), CH(4) dissociation as well as destruction channels have been found, among which the CH(4) + [Et-O-P(═O)(Me)-S-(CH(2))(2)-N(+)(iPr)═CHMe] product and the destruction product forming Et-O-P(═O)(Me)-SMe + CH(2)═N(+)(iPr)(2) are only 9 kcal/mol less stable than the most stable N-protonated product. For fluoridization, the S-P destruction channel to give Et-O-P(═O)(Me)(F) + [S-(CH(2))(2)-N-(iPr)(2)](-) is energetically the most favorable, with a fluoride affinity of -ΔE ∼ 44 kcal. Various F(-) ion-molecule complexes are also found, with the one having F(-) interacting with two hydrogen atoms in different alkyl groups to be only 9 kcal/mol higher than the above destruction product. These results suggest VX behaves quite differently from surrogate systems.

  14. 氟化铵制备氟化钙最优条件研究%Optimized Conditions for Calcium Fluoride Preparation by Ammonium Fluoride

    Institute of Scientific and Technical Information of China (English)

    廖靖华; 王丽琼

    2014-01-01

    试验采用氟化铵与石灰石粉、石灰乳反应制取氟化钙,研究了反应温度、物料浓度、物料过量系数等各主要参数变化对氟化钙结晶、过滤速度、氟收率及其含量的影响,摸索出最优反应条件。%The ammonium fluoride was used during the experiment together with the limestone powder and lime milk to extract calcium fluoride through reaction.The reaction temperature,material concentration and excess coef-ficient were analyzed to find out their impact on the crystallization of calcium fluoride,filtering speed,fluoride yield and content.The optimized reaction conditions was explored.

  15. Prevalence and extent of dental caries, dental fluorosis, and developmental enamel defects in Lithuanian teenage populations with different fluoride exposures

    DEFF Research Database (Denmark)

    Machiulskiene, Vita; Bælum, Vibeke; Fejerskov, Ole

    2009-01-01

    ; the prevalence of non-fluoride opacities was 8% and 19%, respectively; and the prevalence of hypoplasia was 12% and 16%, respectively, in the '1.1 ppm fluoride' and '0.3 ppm fluoride' groups. Higher caries levels were noted in children with no fluorosis compared to those with fluorosis recorded (mean DS...

  16. Development of fluorides for high power laser optics

    Energy Technology Data Exchange (ETDEWEB)

    Ready, J.F.; Vora, H.

    1980-07-01

    The laser-assisted thermonuclear fusion program has significant needs for improved optical materials with high transmission in the ultraviolet, and with low values of nonlinear index of refraction. Lithium fluoride (LiF) possesses a combination of optical properties which are of potential use. Single-crystalline LiF is limited by low mechanical strength. In this program, we investigated the technique of press-forging to increase the mechanical strength. LiF single crystals were press-forged over the temperature range 300 to 600/sup 0/C to produce fine-grained polycrystalline material.

  17. Improved flexibility with grayscale fabrication of calcium fluoride homogenizers

    Science.gov (United States)

    Brown, Jeremiah; Brakhage, Peter; Simmons, Lamarr; Mueller, Ralf

    2012-03-01

    High quality and highly uniform illumination is a critical component for advanced lithography systems and wafer inspection tools. Homogenizer elements fabricated in calcium fluoride have demonstrated good performance for deep UV applications. Grayscale photolithography allows for the fabrication of single-sided micro lens array (MLA) elements with excellent optical performance. The MLA offers some significant advantages over crossed cylinders fabricated using grayscale photolithography processes, including the reduction in the number of fabrication steps and the added flexibility of manufacturing noncylindrical surface geometries. This research presentation reviews the fabrication process and compares grayscale crossed cylindrical arrays and MLAs in terms of their capabilities and performance.

  18. Gelation Behavior of Poly (Vinylidene Fluoride )-based Gel Polymer Electrolyte

    Institute of Scientific and Technical Information of China (English)

    WANG Biao-bing; GU Li-xia

    2006-01-01

    Poly ( vinylidene fluoride ) ( PVdF )-based gel polymer electrolytes with various compositions were prepared by solution casting technique. The kinetics of gelation was analyzed via the correlation between the apparent gelation rate and concentration of PVdF at a given temperature.Combination the results of the kinetics of gelation and the DSC study, it revealed that the phase separation was the major behavior and the fibrils were the major junction joints of the three-dimensional network even in the ease the concentration of PVdF was higher than 25 wt%. The porous surface observed by ESEM also reflected that the phase separation took place during the gelation.

  19. Electrochemical studies on cerium(Ⅲ) in molten fluoride mixtures

    Institute of Scientific and Technical Information of China (English)

    VIRGIL; CONSTANTIN; ANA-MARIA; POPESCU; MIRCEA; OLTEANU

    2010-01-01

    This study aims to determine the principal electrochemical characteristics of the electrodeposition of cerium metal from molten fluoride systems.The cathodic process of Ce3+ ions in LiF-NaF and LiF-NaF-CaF2 molten salts was studied using electrochemical techniques as steady state and cyclic voltammetry methods.The decomposition potential(Ed) and the overvoltage(η) were determined for NaCeF4 using current-potential curves under galvanostatic conditions.The Ed was found to be 2.025 V in LiF-NaF and 2.045 V in...

  20. Effect of hydrogen fluoride on two pigments in coleus

    Energy Technology Data Exchange (ETDEWEB)

    Lamprecht, W.O. Jr.; Powell, R.D.

    Coleus blumei Benth. Cv. 12th Man was fumigated with hydrogen fluoride gas. The treatment caused the development of lesions which originally involved the mesophyll but spread to and eventually included the epidermis. An anthocyanin, cyanidin-3,5-diglucoside acylated with p-coumaric acid, was destroyed and it was postulated that the flavanonol, dihydrokaempferol, was converted to the flavone, apigenin. The anthocyanin destruction and pigment conversion occurred following membrane injury and mixing of the cellular constituents. 17 references, 1 figure, 1 table.

  1. The precision of three enamel biopsy methods for fluoride determination.

    Science.gov (United States)

    Spörri, S; Belser, U; Mühlemann, H R

    1975-10-01

    3 different enamel biopsy methods were tested on 2 maxillary permanent incisors on each of 90 schoolchildren. In methods A and B the round biopsy field was bordered by copalite varnish, while method C utilized a scotch tape border. The biopsy itself resulted from etching the enamel surface with 2N perchloric acid for 7 sec for method A, and 14 sec for methods B and C. Flouride was measured with the fluoride activity electrode. The doubled etching time caused only a 30 to 40% increase of enamel removal. Method C showed the best reproducibility.

  2. Investigation of Chemical Durability Mechanism in Fluoride Glasses

    Science.gov (United States)

    1985-12-01

    exhibiting the higher normalized leach rates. The addition of Na and Al to form the ZBLAN glass (Fig. 2C) in- creases the corrosion rate of all of the...leach rates vs. time from leachate anal- ysis for individual elements of glasses : (A) ZBLAL; (B) ZBLALPb; (C) ZBLAN . Figure 3: Compositionally...eel0angInvestigation of Chemical Durability flechanis s iR Fluoride Glasses . 12. PERSONAL AUTO*ORISI Catherine J. Simmons and Joseph H. Simmons 13& TYPEV Of RP-ORT 113

  3. S tudy on Doped Fluoride Glasses for Scintillation Applications

    Institute of Scientific and Technical Information of China (English)

    Shaukat; S; F.; Farooq; R; 等

    2002-01-01

    This paper studies the properties of fluoride glasses for use in particle calorimeters or in optical fibers.The effects of major and minor impurities in manufacturing process and ultimately on the glass properties have been investigated.Glasses in a range of compositions have been made and tested in the form of small samples as well as larger blocks of size 2× 3×14cm3.Results of measurements on these materials,using a high energy particle beam,are presented.

  4. Randomized trial on fluorides and sealants for fissure caries prevention

    OpenAIRE

    Lin, HC; Liu, BY; Lo, ECM; Chu, CH

    2012-01-01

    To investigate the effectiveness of topical fluorides in preventing fissure caries, we conducted a randomized controlled trial with parallel groups. In total, 501 children (1,539 molars, 3,078 sites), mean age 9.1 years, who had at least one sound permanent first molar with deep fissures or fissures with signs of early caries were recruited. They were randomly allocated among four groups: (1) resin sealant, single placement; (2) 5% NaF varnish, semi-annual application; (3) 38% silver diamine ...

  5. Morphology of Polyvinylidene Fluoride Based Gel Polymer Electrolytes

    Institute of Scientific and Technical Information of China (English)

    田立颖; 黄小彬; 唐小真

    2004-01-01

    Two series of polyvinylidene fluoride (PVDF) based gel polymer electrolytes, with different LiClO4 or propylene carbonate (PC) content, were prepared and analyzed by infrared spectrometer, differential scanning calorimetry, scanning electron microscope and complex impedance spectrometer. The results show that there are great interactions between PVDF, PC and lithium cations. Both LiClO4 and PC content lead to evident change of the morphology of the gel polymer electrolytes. The content of LiClO4 and PC also influences the ionic conductivity of the samples,and an ionic conductivity of above 10-3S·cm-1 can be reached at room temperature.

  6. Spectroscopic properties of trivalent praseodymium in barium yttrium fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Di Bartolo, B. E-mail: dibartob@bc.edurinodiba@attbi.com; Bowlby, B.E

    2003-05-01

    We have conducted a spectroscopic investigation of Pr{sup 3+} in barium yttrium fluoride (BaY{sub 2}O{sub 8}). Two doping concentrations were used: BaY{sub 2}F{sub 8}:Pr{sup 3+} (0.3%) and BaY{sub 2}F{sub 8}:Pr{sup 3+} (1%). The measurements included absorption, luminescence under continuous and pulsed excitations, and thermal effects on some sharp lines. The experimental results were used to characterize this system.

  7. Corrosion Behavior of Alloys in Molten Fluoride Salts

    Science.gov (United States)

    Zheng, Guiqiu

    The molten fluoride salt-cooled high-temperature nuclear reactor (FHR) has been proposed as a candidate Generation IV nuclear reactor. This reactor combines the latest nuclear technology with the use of molten fluoride salt as coolant to significantly enhance safety and efficiency. However, an important challenge in FHR development is the corrosion of structural materials in high-temperature molten fluoride salt. The structural alloys' degradation, particularly in terms of chromium depletion, and the molten salt chemistry are key factors that impact the lifetime of nuclear reactors and the development of future FHR designs. In support of materials development for the FHR, the nickel base alloy of Hastelloy N and iron-chromium base alloy 316 stainless steel are being actively considered as critical structural alloys. Enriched 27LiF-BeF2 (named as FLiBe) is a promising coolant for the FHR because of its neutronic properties and heat transfer characteristics while operating at atmospheric pressure. In this study, the corrosion behavior of Ni-5Cr and Ni-20Cr binary model alloys, and Hastelloy N and 316 stainless steel in molten FLiBe with and without graphite were investigated through various microstructural analyses. Based on the understanding of the corrosion behavior and data of above four alloys in molten FLiBe, a long-term corrosion prediction model has been developed that is applicable specifically for these four materials in FLiBe at 700ºC. The model uses Cr concentration profile C(x, t) as a function of corrosion distance in the materials and duration fundamentally derived from the Fick's diffusion laws. This model was validated with reasonable accuracy for the four alloys by fitting the calculated profiles with experimental data and can be applied to evaluate corrosion attack depth over the long-term. The critical constant of the overall diffusion coefficient (Deff) in this model can be quickly calculated from the experimental measurement of alloys' weight

  8. Ferroelectric fluoride compositions and methods of making and using same

    Science.gov (United States)

    Halasyamani, P Shiv; Chang, Hong-Young

    2015-04-07

    A method for synthesis of a ferroelectric material characterized by the general formula A.sub.xB.sub.yF.sub.z where A is an alkaline earth metal, B is transition metal or a main group metal, x and y each range from about 1 to about 5, and z ranges from about 1 to about 20 comprising contacting an alkaline earth metal fluoride, a difluorometal compound and a fluoroorganic acid in a medium to form a reaction mixture; and subjecting the reaction mixture to conditions suitable for hydrothermal crystal growth.

  9. Electrospinning of Polyvinylidene Fluoride and Polyetherimide From Mixed Solvents

    Science.gov (United States)

    Morgret, Leslie D.; Pawlowski, Kristin J.; Hinkley, Jeffrey A.

    2005-01-01

    Polyvinylidene fluoride and Ultem(TradeMark) polyetherimide were dissolved in 50/50 acetone/N,N dimethylformamide (DMF) and 80/20 tetrahydrofuran/DMF, respectively, and electrospun. Polymer solution concentrations and molecular weights were changed while other spinning parameters (voltage, distance, solution feed rate) were held constant. Fiber diameters in the resulting electrospun mats varied from 0.25 to 4.4 microns, increasing with polymer concentration and molecular weight; trends in diameter were compared with trends in viscosities and surface tensions of the spinning solutions.

  10. Advanced nozzle characterization for hydrogen fluoride overtone chemical lasers

    Science.gov (United States)

    Duncan, William A.; Patterson, Stanley P.; Graves, Bruce R.; Sollee, Jeffrey L.; Yonehara, Gordon N.; Dering, John P.

    1992-07-01

    The parametric characterization and optimization of the hypersonic, low-temperature (HYLTE) nozzle concept for the hydrogen fluoride (HF) overtone and HF fundamental performance are reviewed. The HF fundamental space-based laser for weapons systems is considered to be more mature, nearer term potential application than the overtone. Emphasis is placed on the Task 3 advanced gain generator technology configurations (AGGTC) aimed at a thorough characterization in the fundamental regime. The experiments were based on advanced multilayer dielectric coatings on uncooled silicon substrates. It is concluded that the Task 3 AGGTC hardware functioned quite well in optimizing the performance of the HYLTE nozzle concept.

  11. Fluoride induces oxidative damage and SIRT1/autophagy through ROS-mediated JNK signaling

    Science.gov (United States)

    Suzuki, Maiko; Bandoski, Cheryl; Bartlett, John D.

    2015-01-01

    Fluoride is an effective caries prophylactic, but at high doses can also be an environmental health hazard. Acute or chronic exposure to high fluoride doses can result in dental enamel and skeletal and soft tissue fluorosis. Dental fluorosis is manifested as mottled, discolored, porous enamel that is susceptible to dental caries. Fluoride induces cell stress, including endoplasmic reticulum stress and oxidative stress, which leads to impairment of ameloblasts responsible for dental enamel formation. Recently we reported that fluoride activates SIRT1 and autophagy as an adaptive response to protect cells from stress. However, it still remains unclear how SIRT1/autophagy is regulated in dental fluorosis. In this study, we demonstrate that fluoride exposure generates reactive oxygen species (ROS) and the resulting oxidative damage is counteracted by SIRT1/autophagy induction through c-Jun N-terminal kinase (JNK) signaling in ameloblasts. In the mouse-ameloblast-derived cell line LS8, fluoride induced ROS, mitochondrial damage including cytochrome-c release, up-regulation of UCP2, attenuation of ATP synthesis, and H2AX phosphorylation (γH2AX), which is a marker of DNA damage. We evaluated the effects of the ROS inhibitor N-acetylcysteine (NAC) and the JNK inhibitor SP600125 on fluoride-induced SIRT1/autophagy activation. NAC decreased fluoride-induced ROS generation and attenuated JNK and c-Jun phosphorylation. NAC decreased SIRT1 phosphorylation and formation of the autophagy marker LC3II, which resulted in an increase in the apoptosis mediators γH2AX and cleaved/activated caspase-3. SP600125 attenuated fluoride-induced SIRT1 phosphorylation, indicating that fluoride activates SIRT1/autophagy via the ROS-mediated JNK pathway. In enamel organs from rats or mice treated with 50, 100, or 125 ppm fluoride for 6 weeks, cytochrome-c release and the DNA damage markers 8-oxoguanine, p-ATM, and γH2AX were increased compared to those in controls (0 ppm fluoride). These

  12. Document on fluoride accumulation in ground and surface water of Mysore, Karnataka, India

    Directory of Open Access Journals (Sweden)

    Mamatha S.V.

    2013-08-01

    Full Text Available We have documented various levels of fluoride in groundwater, running water (i.e streams, canals, river and lake water in 130 samples collected from various sources in Mysore District. Mysore is one of the most popular tourist places in India. Fluoride is one of the parameter of water analysis, which is non-degradable and persists in the environment. Fluoride was assessed by Zirconyl- SPADNS method. Fluoride level varied from 0.2 mg/L to 3.0 mg/L with the highest level at Dalvoy Lake (3.0 ppm followed by Lingambudi Borewell water (2.9 ppm giving a cautious alarm for an awareness to the Mysoreans.Water samples from north-eastern part of Piriyapatna, a small pocket of southern part of H.D.Kote and an extreme southern part of Mysore taluk (urban were having fluoride concentration above acceptable range of WHO and BIS standard.

  13. COMPARATIVE STUDY OF GREEN TEA POLYPHENOL AND FLUORIDE ON STREPTOCOCCUS MUTANS

    Institute of Scientific and Technical Information of China (English)

    李鸣宇; 刘正

    2000-01-01

    Objective To disclose the mechanism of green tea polyphenol in the prevention of dental caries.Methods Using sodium fluoride (highly effective anticaries agent) as control and Streptococcus mutans (carigenous microbe) as target, green tea polyphenol (potential bacterial inhibitor) was used to testify its action on the change of microbial morphology, extramicrobial sucrase, glucosyltransferase (GTF), lactate hydrogenase (LDH),protein and pH values of the culture media. Results GTF activities were inhibited both by green tea polyphenol and sodium fluoride, the inhibitory efficacy was stronger in green tea polyphenol. Morphologic changes consisted of membrane disruption in tea polyphenol treated microbes, and cytoplasmic vacuolization in fluoride treated bacteria.High protein level in fluoride treated culture media means cytoplasmic decomposition, intracellular protein leakage into media. Conclusion The inhibition of GTF activity was stronger in green tea polyphenol treated microbes.The target of action was cell membrane disruption in green tea polyphenol treated cell and cytoplasmic in fluoride treated microbes.

  14. A Review of Groundwater Quality Issue in Jharkhand Due to Fluoride

    Directory of Open Access Journals (Sweden)

    Neeta Kumari

    2014-07-01

    Full Text Available Water is elixir of life. Water resources are categorized as surface sources and Groundwater sources. The groundwater have certain dissolved ions , among which presence of fluoride has got significance as it is required by the human body for mineralization of bones and formation of enamel. As per the WHO standard prescribe maximum level for fluoride in drinking water, is 1.5 mg/l, and IS : 10500 specifies required desirable limit of fluoride concentration in drinking water as 0.6-1.0 mg/L, maximum limit is extended to 1.5 mg/l. In the study area, Jharkhand, Palamu, Garhwa, Giridih, Bokaro, Gumla, Godda, Ranchi are the districts where fluoride pollution in water is prevalent. The Daltonganj block in Palamu district is severely affected by this problem. The fluoride problem in the area is mainly geogenic. Other factors like pH, climatic conditions also play a major role.

  15. Effect of Fluoride, Casein Phosphopeptide–Amorphous Calcium Phosphate and Casein Phosphopeptide–Amorphous Calcium Phosphate Fluoride on Enamel Surface Microhardness After Microabrasion: An In Vitro Study

    Directory of Open Access Journals (Sweden)

    Ghazaleh Ahmadi Zenouz

    2016-03-01

    Full Text Available Objectives: This study aimed to assess the effect of applying casein phosphopeptide–amorphous calcium phosphate (CPP-ACP paste, casein phosphopeptide–amorphous calcium phosphate fluoride (CPP-ACPF paste and sodium fluoride gel on surface microhardness of enamel after microabrasion.Materials and Methods: Thirty freshly extracted human premolars were selected. All samples were subjected to hardness indentations made with the Vickers hardness machine and the average value was recorded as the initial surface microhardness. The specimens were then randomly divided into three groups (n=10 of CPP-ACPF, fluoride and CPP-ACP. The teeth were micro-abraded with Opalustre. Microhardness test was performed to assess the post-abrasion hardness. Three remineralization modalities were performed on samples of each group. The enamel surface microhardness measurements were performed. To compare the difference between groups, the rehardening and softening values were defined. One-way ANOVA and Tukey’s post hoc test at a significance level of 5% were used for statistical analysis.Results: The mean microhardness value (MMV had a significant decrease after microabrasion from baseline. The MMV had a significant increase after remineralization in all groups. The MMV of CPP-ACPF group was significantly more than that of fluoride group (P=0.027. The rehardening value of fluoride group was significantly more than that of other groups (P<0.001.Conclusion: All the remineralizing agents were effective for rehardening the enamel after microabrasion. The CPP-ACP and CPP-ACPF pastes are effective, but to a lesser extent than neutral sodium fluoride gel in remineralizing enamel surface. Incorporation of fluoride to CPP-ACP formulation does not provide any additional remineralizing potential.Keywords: Casein phosphopeptide-amorphous calcium phosphate nanocomplex; Enamel Microabrasion; Hardness; Sodium Fluoride

  16. Treatment of proximal superficial caries lesions on primary molar teeth with resin infiltration and fluoride varnish versus fluoride varnish only: efficacy after 1 year

    DEFF Research Database (Denmark)

    Ekstrand, K R; Bakhshandeh, A; Martignon, S

    2010-01-01

    This split-mouth study aimed to assess the efficacy of resin-infiltrated lesions covered by fluoride varnish (FV) versus FV treatment only of proximal lesions on deciduous molar teeth. The study lasted for 1 year. Children with 2 or more superficial proximal lesions on deciduous molar teeth.......01). Radiographically, 23% of the test lesions and 62% of the control lesions had progressed (p 35% and significant. To conclude, resin infiltration in conjunction with fluoride varnish seems promising...

  17. Comparison of the antimicrobial efficacy of chlorhexidine, sodium fluoride, fluoride with essential oils, alum, green tea, and garlic with lime mouth rinses on cariogenic microbes

    OpenAIRE

    Thomas, Ann; Thakur, Sneha; Mhambrey, Sanjana

    2015-01-01

    Background: A number of natural mouth rinse formulations are being proposed as an alternative to the widely used chemical mouth rinses. Objective: To evaluate and compare the antimicrobial efficacy of chlorhexidine (0.2%), sodium fluoride (0.05%), fluoride with essential oils (0.05%), alum (0.02 M), green tea, and garlic with lime mouth rinses against Streptococcus mutans, lactobacilli, and Candida albicans. Materials and Methods: The three microbes were isolated from the saliva samples colle...

  18. Effect of Fluoride Mouthrinse and Toothpaste on Number of Streptococcal Colony Forming Units of Dental Plaque

    Directory of Open Access Journals (Sweden)

    SE Jabbarifar

    2005-11-01

    Full Text Available Background: Frequent topical fluoride therapy through toothpaste, mouthrinse, professional gels and solutions causes decrease in incidence, pause and repair of dental caries in the enamel. These mechanisms are done through penetration of fluoride ions (F- and their replacement with hydroxyl ions (OH- of hydroxyappatite of enamel, interfere with microbial metabolism of dental plaque and bacteriostatic effect on some cariogenic bacterial strains such as streptococci. The aim of this study was to examine the effect of fluoride mouthrinse and toothpaste on the number of streptococcal colony forming units of dental plaque. Methods: 62 children with 6-7 years old were put in two groups. Samples of dental plaque from each group were collected both before and after use of the fluoride mouthrinse and or toothpaste. The samples were cultured on blood agar to find the number of streptococcal colony forming units (CFU. The mean colony forming unit was compared inter and intra groups before and after application of Fluoride products. Results: The streptococcal CFU of dental plaque before and after use of the mouthrinse and toothpaste respectively was (1240±1367, 1253±1341.5 and (551±716, 898±1151. Statistically, the streptococcal CFU in each group before and after use of the toothpaste and mouthrinse was significantly different. Conclusion: The findings of this study indicated that the fluoride toothpaste and mouthrinse reduce number of streptococcal colony forming units of dental plaque. Also this reduction was not depended on level of (F- Ions, sort of vehicle of fluoride and frequent application of the fluoride mouthrinse and toothpaste. Keywords: fluoride mouthrinse, fluoride toothpaste, colony forming unit (CFU, streptococcus

  19. Relationships between daily total fluoride intake and dental fluorosis and dental caries

    Institute of Scientific and Technical Information of China (English)

    Quanyong Xiang; Minghao Zhou; Ming Wu; Xinya Zhou; Li Lin; Jiuning Huang; Youxing Liang

    2009-01-01

    Objective:To explore the relationships between the dally total intake of fluoride,dental fluorosis and dental caries.Methods:An epidemiological method was used to investigate the daily total intake of fluoride,dental fluorosis,and dental caries among 236 and 290 children aged 8-13 years in a severe endemic area and in a non-fluorosis control area,respectively.The children were divided into eight subgroups according to each child's estimated dally total intake of fluoride.The prevalence of dental fluorosis and dental caries in each group was calculated.Results:As expected,elevated levels of fluoride intake were significantly associated with a higher prevalence of dental fluorosis and an increasing amount of more severe defect dental fhiorosis.When the dally total F intake was 2.78 rag/child/day,the prevalence of dental fluorosis was nearly 100%,with the prevalence of defect dental fluorosis increasing with increasing fluoride intake.There was also a significant negative(inverse) dose-response relationship between the dally total intake of fluoride and the overall preva-lence of dental caries,the prevalence of which decreased when the daily total intake of fluoride increased up to 3.32 mg/child/day.However,at higher levels of daily total intake of fluoride the prevalence of dental caries increased,giving rise to a U-shaped dose-response relationship curve.Conclusion:It is important to monitor total fluoride exposure and protect children from excessive fluoride intake,especially during the years of tooth development.

  20. Assessment of Fluoride Levels in Different Brands of Black and Green Tea Consumed in Iran

    Directory of Open Access Journals (Sweden)

    F. Mojarad

    2013-01-01

    Full Text Available Introduction & Objective: Tea is one of the most commonly consumed drinks in the world. Tea is recognized as a source of fluoride whose intake may increase the risk of developing dental fluorosis, particularly if other sources of fluoride augment the intake. Since the amount of fluoride in different types of tea consumed in our country is unknown, the purpose of this study was to evaluate the fluoride level of 22 commercial brands of tea popular in Iran. Materials & Methods: This descriptive study was conducted to assess the fluoride content of black tea (10 brands, bagged black tea (9 brands, and green tea (3 brands. 2 g from three samples of each tea brand taken out randomly were added to 200 ml deionized water and boiled for 10 minutes. After the infusion temperature coming down to the room temperature, the infusion was filtered and its volume made up to 200 ml by adding deionized water. The fluoride levels were measured using ion-selective electrode, and reported as mg/lit. Data were analyzed by ANOVA and Tukey test. Results: The Fluoride content was found 1.51 mg/lit in black tea bag, 1.038 mg/lit in green tea and 0.869±0.360 mg/lit in black tea sticks. (P<0.05, However, there was no statistically sig-nificant difference of fluoride concentration between green tea and black tea sticks(P= 0.52. Conclusion: This study showed that fluoride content of some tea brands were so high that drinking a few cups daily may increase the risk of developing dental fluorosis. Therefore, their consumption must be limited particularly in children, and in all inhabitants of regions with high fluoride levels in water supply.(Sci J Hamadan Univ Med Sci 2013; 19 (4:36-42

  1. Fluoride in the drinking water of Pakistan and the possible risk of crippling fluorosis

    Directory of Open Access Journals (Sweden)

    M. A. Tahir

    2012-09-01

    Full Text Available To explore the possibility of fluoride toxicity, seven hundred and forty seven (747 water samples were collected from surface and ground water sources of sixteen major cities of Pakistan, adopting a uniform sampling design with distribution of samples as: Lahore (79, Kasur (46, Faisalabad (30, Khushab (50, Chakwal (51, Mianwali (30, Jhelum (53, Bahawalpur (60, Karachi (60, Mirpur Khas (55, Peshawar (38, Risalpur (35, Quetta (81, Ziarat (21, Loralai (21, Mastung (37. The comparison of analytical findings with WHO Guidelines of Drinking Water for Fluoride (i.e. 1.5 ppm has concluded that 16% of the monitored water sources have fluoride concentration beyond the permissible, safe limit of 1.5 mg l−1, falling in the concentration range of 1.6–25 mg l−1. The highest fluoride contamination (22% has been detected in the Balochistan province followed by 19% in Punjab province. Comparatively higher fluoride levels of >20% in groundwater sources such as hand pumps has supported the possibility of increased ground water contamination, as excessive fluoride concentrations are expected to come from calcium-poor aquifers and from areas where fluoride-bearing minerals are common or where cation exchange of sodium for calcium occurs. Field observations have also indicated the prevalence of fluoride-associated health implications in the study areas with excessive fluoride in water sources. The findings in this study have provided a bidirectional vision for epidemiological investigations as well as for mitigating the issues in the affected vicinities of fluoride-rich areas.

  2. Corrosion behavior of zirconia in acidulated phosphate fluoride

    Directory of Open Access Journals (Sweden)

    Anie Thomas

    2016-02-01

    Full Text Available ABSTRACT Objective The corrosion behavior of zirconia in acidulated phosphate fluoride (APF representing acidic environments and fluoride treatments was studied. Material and Methods Zirconia rods were immersed in 1.23% and 0.123% APF solutions and maintained at 37°C for determined periods of time. Surfaces of all specimens were imaged using digital microscopy and scanning electron microscopy (SEM. Sample mass and dimensions were measured for mass loss determination. Samples were characterized by powder X-ray diffraction (XRD to detect changes in crystallinity. A biosensor based on electrochemical impedance spectroscopy (EIS was used to detect ion dissolution of material into the immersion media. Results Digital microscopy revealed diminishing luster of the materials and SEM showed increased superficial corrosion of zirconia submerged in 1.23% APF. Although no structural change was found, the absorption of salts (sodium phosphate onto the surface of the materials bathed in 0.123% APF was significant. EIS indicated a greater change of impedance for the immersion solutions with increasing bathing time. Conclusion Immersion of zirconia in APF solutions showed deterioration limited to the surface, not extending to the bulk of the material. Inferences on zirconia performance in acidic oral environment can be elucidated from the study.

  3. Fluoride Content of Bottled Drinking Waters in Qatar.

    Science.gov (United States)

    Almulla, Hessa Ibrahim; King, Nigel M; Alnsour, Hamza Mohammad; Sajnani, Anand K

    2016-12-01

    Fluoridation of drinking water has been recognized as one of the most effective ways of achieving community-wide exposure to the caries prevention effects of fluoride (F). A vast majority of people in Qatar use bottled water for drinking. Use of bottled water without knowing the F level may expose children to dental caries risk if the F level is lower than optimal or to dental fluorosis if the F level is too high. The aim of this study was to determine the F concentration of bottled water available in Qatar. A total of 32 brands of bottled water were evaluated. The F concentrations displayed on the labels were recorded. The F ion-selective electrode method was used to measure the F concentration in water samples, and three measurements were taken for every sample to ensure reproducibility. The p value was set at 0.05. The F concentration ranged from 0.06 to 3.0 ppm with a mean value of 0.8 ppm (±0.88). The F levels were provided by the manufacturers on the labels of 60 % of the samples, but this was significantly lower than the measured F levels (p water that was produced in Saudi Arabia had significantly higher levels of F when compared to those produced in other countries (p water. Furthermore, there was a significant disparity between the F levels which were measured and those that were provided on the labels.

  4. Cerium fluoride nanoparticles protect cells against oxidative stress

    Energy Technology Data Exchange (ETDEWEB)

    Shcherbakov, Alexander B.; Zholobak, Nadezhda M. [Zabolotny Institute of Microbiology and Virology, National Academy of Sciences of Ukraine, Kyiv D0368 (Ukraine); Baranchikov, Alexander E. [Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences, Moscow 119991 (Russian Federation); Ryabova, Anastasia V. [Prokhorov General Physics Institute of the Russian Academy of Sciences, Moscow 119991 (Russian Federation); National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow 115409 (Russian Federation); Ivanov, Vladimir K., E-mail: van@igic.ras.ru [Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences, Moscow 119991 (Russian Federation); National Research Tomsk State University, Tomsk 634050 (Russian Federation)

    2015-05-01

    A novel facile method of non-doped and fluorescent terbium-doped cerium fluoride stable aqueous sols synthesis is proposed. Intense green luminescence of CeF{sub 3}:Tb nanoparticles can be used to visualize these nanoparticles' accumulation in cells using confocal laser scanning microscopy. Cerium fluoride nanoparticles are shown for the first time to protect both organic molecules and living cells from the oxidative action of hydrogen peroxide. Both non-doped and terbium-doped CeF{sub 3} nanoparticles are shown to provide noteworthy protection to cells against the vesicular stomatitis virus. - Highlights: • Facile method of CeF{sub 3} and CeF{sub 3}:Tb stable aqueous sols synthesis is proposed. • Naked CeF{sub 3} nanoparticles are shown to be non-toxic and to protect cells from the action of H{sub 2}O{sub 2}. • CeF{sub 3} and CeF{sub 3}:Tb nanoparticles are shown to protect living cells against the vesicular stomatitis virus.

  5. Population dynamics in Er3+-doped fluoride glasses

    Science.gov (United States)

    Bogdanov, V. K.; Booth, D. J.; Gibbs, W. E.; Javorniczky, J. S.; Newman, P. J.; Macfarlane, D. R.

    2001-05-01

    A detailed study of the energy-transfer processes in Er3+: flouride glasses with doping concentrations of 0.2-18 mol % is presented. Fluorescence wave forms for 11 erbium transitions were measured under 802-nm, 1.5-μm, 975-nm, 520-nm, and 403-nm excitation from a high-energy short-pulse source. The analysis of these data provided a physical understanding of the processes responsible for the temporal behavior of the populations of a large number of energy levels. A comprehensive nine-level rate-equation model of the Er3+ population dynamics in these fluoride glasses is developed. The model performs well in predicting the observed fluorescence behavior of the main fluorescing lines under all pumping conditions. The modeling process allowed 14 ion-ion energy-transfer processes that are important for the population dynamics in these fluoride glasses to be identified and their rate constants obtained. Noticeably, the inclusion of seven three-ion processes was found necessary in order to obtain good fits to the experimental fluorescence wave forms. It was also found that some three-ion processes have a significant effect on the population dynamics of the levels even in lower doping concentrations.

  6. Thermochemistry of calcium oxide and calcium hydroxide in fluoride slags

    Science.gov (United States)

    Chattopadhyay, S.; Mitchell, A.

    1990-08-01

    Calcium oxide activity in binary CaF2-CaO and ternary CaF2-CaO-Al2O3 and CaF2-CaO-SiO2 slags has been determined by CO2-slag equilibrium experiments at 1400 °C. The carbonate ca-pacity of these slags has also been computed and compared with sulfide capacity data available in the literature. The similarity in trends suggests the possibility of characterizing carbonate capacity as an alternative basicity index for fluoride-base slags. Slag-D2O equilibrium experi-ments are performed at 1400°C with different fluoride-base slags to determine water solubility at two different partial pressures of D2O, employing a new slag sampling technique. A novel isotope tracer detection technique is employed to analyze water in the slags. The water solubility data found show higher values than the previous literature data by an order of magnitude but show a linear relationship with the square root of water vapor partial pressure. The activity of hydroxide computed from the data is shown to be helpful in estimating water solubility in in-dustrial electroslag remelting (ESR) slags.

  7. Using the pollen viability and morphology for fluoride pollution biomonitoring.

    Science.gov (United States)

    Malayeri, Behrooz Eshghi; Noori, Mitra; Jafari, Mehrana

    2012-06-01

    The methods using plants for biomonitoring of air and soil quality are simple, cheap, and fast and can supplement the classical physicochemical methods. In this study, biological pollen characterization of some collected legume species from an aluminum smelter area in Iran (IRALCO) was carried out to determine the actual value of pollen as a bioindicator of the effects of soil and atmospheric pollution. Young buds and flowers of six legumes (Cercis siliquastrum L., Medicago sativa L., Robinia pseudoacacia L., Melilotus officinalis (L.) lam, Trifolium repens L., and Sophora alopecuroides L.) in polluted and control plants were removed and compared. Studies of light and electron microscopic preparation showed some abnormalities during pollen development in affect of fluoride pollution. The viability of pollen grains estimated by staining with acetocarmine shows sharp differences in smearing advanced pollen grains from abnormal ones. Except M. officinalis, the pollen grains of C. siliquastrum, M. sativa, R. pseudoacacia, T. repens, and S. alopecuroides in polluted areas showed light, partial, or no staining with acetocarmine, whereas almost all of the control ones clearly stained. Observation of the pollen grains by light microscopy and scanning electron microscopy showed the significant effect of fluoride on shapes and sizes of pollen grains. The stimulation and inhibition of these pollen characteristics depend on the pollen species as well as on the pollutant and its concentration. Therefore, pollen grains provide essential information on biological impact of pollutants and they are good candidates for biomonitoring the atmospheric and edaphic pollutions.

  8. Alloys compatibility in molten salt fluorides: Kurchatov Institute related experience

    Energy Technology Data Exchange (ETDEWEB)

    Ignatiev, Victor, E-mail: ignatiev@vver.kiae.ru; Surenkov, Alexandr

    2013-10-15

    In the last several years, there has been an increased interest in the use of high-temperature molten salt fluorides in nuclear power systems. For all molten salt reactor designs, materials selection is a very important issue. This paper summarizes results, which led to selection of materials for molten salt reactors in Russia. Operating experience with corrosion thermal convection loops has demonstrated good capability of the “nickel–molybdenum alloys + fluoride salt fueled by UF{sub 4} and PuF{sub 3} + cover gas” system up to 750 °C. A brief description is given of the container material work in progress. Tellurium corrosion of Ni-based alloys in stressed and unloaded conditions studies was also tested in different molten salt mixtures at temperatures up to 700–750 °C, also with measurement of the redox potential. HN80MTY alloy with 1% added Al is the most resistant to tellurium intergranular cracking of Ni-base alloys under study.

  9. On the Eu2+ luminescence in some perovskite fluorides

    Science.gov (United States)

    Belsare, P. D.; Joshi, C. P.; Moharil, S. V.; Omanwar, S. K.

    2015-08-01

    In the recent years due to their various optical and technological applications fluoride materials have attracted attention of several researchers. When these materials are doped with rare earth ions they show properties favorable for many optical applications such as high quantum efficiencies. The perovskite type fluorides of formula ABF3 where A= Alkali earth metal (Li,Na,K,Rb,Cs) and B= Alkaline earth metal (Mg,Ca,Ba,Sr) are of special interest to the research workers because of their wide range of applications that includes these materials as thermoluminescence detector, laser material, scintillator, X-ray imaging and storage phosphor, quantum cutter for VUV applications etc. Due to the high symmetry and technological efficiency of the growth process these crystals are good model objects for fundamental studies and in some cases they are of great practical value. This paper reports photoluminescence properties of UV emitting KMgF3, NaMgF3 and LiBaF3 phosphors prepared by reactive atomospheric process. X-ray diffraction and photoluminescence characteristics of these phosphors are also mentioned.

  10. Preparation of Bioactive Titanium Surfaces via Fluoride and Fibronectin Retention

    Directory of Open Access Journals (Sweden)

    Carlos Nelson Elias

    2012-01-01

    Full Text Available Statement of Problem. The chemical or topographic modification of the dental implant surface can affect bone healing, promote accelerated osteogenesis, and increase bone-implant contact and bonding strength. Objective. In this work, the effects of dental implant surface treatment and fibronectin adsorption on the adhesion of osteoblasts were analyzed. Materials and Methods. Two titanium dental implants (Porous-acid etching and PorousNano-acid etching followed by fluoride ion modification were characterized by high-resolution scanning electron microscopy, atomic force microscopy, and X-ray diffraction before and after the incorporation of human plasma fibronectin (FN. The objective was to investigate the biofunctionalization of these surfaces and examine their effects on the interaction with osteoblastic cells. Results. The evaluation techniques used showed that the Porous and PorousNano implants have similar microstructural characteristics. Spectrophotometry demonstrated similar levels of fibronectin adsorption on both surfaces (80%. The association indexes of osteoblastic cells in FN-treated samples were significantly higher than those in samples without FN. The radioactivity values associated with the same samples, expressed as counts per minute (cpm, suggested that FN incorporation is an important determinant of the in vitro cytocompatibility of the surfaces. Conclusion. The preparation of bioactive titanium surfaces via fluoride and FN retention proved to be a useful treatment to optimize and to accelerate the osseointegration process for dental implants.

  11. Nanocrystalline rare earth fluorides doped with Pr3+ions

    Institute of Scientific and Technical Information of China (English)

    Marcin Runowski; Stefan Lis

    2016-01-01

    Praseodymium(III) doped CeF3, CeF3:Gd, LaF3, GdF3 and YF3 inorganic fluorides were precipitated in an aqueous, sur-factant-free solution, using NH4F as a source of fluoride ions. The as-prepared products were subjected to a hydrothermal treatment, which led to the formation of crystalline nanoluminophores, composed of spherical (≈30 nm) and elongated (≈40–200 nm) nanos-tructures. Due to the presence of Pr3+ions, the synthesized nanomaterials showed yellow luminescence under a blue light irradiation. The nanoluminophore based on the YF3 host revealed the most promising spectroscopic properties, i.e., bright and intensive emission, hence it was investigated in detail. The photophysical properties of the nanomaterials obtained were studied by powder X-ray diffrac-tion (XRD), transmission electron microscopy (TEM) and spectrofluorometry, i.e., measurements of excitation/emission spectra and luminescence decay curves.

  12. Viscosity of molten lithium, thorium and beryllium fluorides mixtures

    Science.gov (United States)

    Merzlyakov, Alexander V.; Ignatiev, Victor V.; Abalin, Sergei S.

    2011-12-01

    Considering development of Molten Salt Fast Reactor (MSFR) concept, following Molten Salt fluorides mixtures have been chosen as an object for viscosity studies in this work (in mol%): 78LiF-22ThF 4; 71LiF-27ThF 4-2BeF 2 and 75LiF-20ThF 4-5BeF 2. Additionally, the effect of the 3 mol% CeF 3 additives on viscosity of the molten 75LiF-20ThF 4-5BeF 2 (mol%) salt mixture has been investigated experimentally. The method of torsional oscillations of cylindrical crucible filled by molten fluorides mixture has been chosen for kinematic viscosity measurement at temperatures up to 800-850 °C. In temperature ranges, where melts behave as normal liquids, dependences on viscosity vs. temperature are received: ν = А exp [B/T(K)], where ν - kinematic viscosity, m 2/s; T - temperature, K. The kinematic viscosity Rout mean squares (RMS) estimated in the assumption about dispersion homoscedasticity is (0.04-0.12) × 10 -6 (m 2/s). Discrepancies left in the data of viscosity for molten mixtures of LiF, BeF 2 and ThF 4 received by different researchers need further investigations in this area to be continued.

  13. Proximal renal tubular injury in rats sub-chronically exposed to low fluoride concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Cárdenas-González, Mariana C.; Del Razo, Luz M. [Departmento de Toxicología, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV-IPN), México, D. F., México (Mexico); Barrera-Chimal, Jonatan [Unidad de Fisiología Molecular, Instituto de Investigaciones Biomédicas, Universidad Nacional Autónoma de México and Instituto Nacional de Ciencias Médicas y Nutrición Salvador Zubirán, México, D. F., México (Mexico); Jacobo-Estrada, Tania [Departmento de Toxicología, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV-IPN), México, D. F., México (Mexico); López-Bayghen, Esther [Departamento de Genética y Biología Molecular, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV-IPN), México, D. F., México (Mexico); and others

    2013-11-01

    Fluoride is usually found in groundwater at a very wide range of concentration between 0.5 and 25 ppm. At present, few studies have assessed the renal effects of fluoride at environmentally relevant concentrations. Furthermore, most of these studies have used insensitive and nonspecific biomarkers of kidney injury. The aim of this study was to use early and sensitive biomarkers to evaluate kidney injury after fluoride exposure to environmentally relevant concentrations. Recently weaned male Wistar rats were exposed to low (15 ppm) and high (50 ppm) fluoride concentrations in drinking water for a period of 40 days. At the end of the exposure period, kidney injury biomarkers were measured in urine and renal mRNA expression levels were assessed by real time RT-PCR. Our results showed that the urinary kidney injury molecule (Kim-1), clusterin (Clu), osteopontin (OPN) and heat shock protein 72 excretion rate significantly increased in the group exposed to the high fluoride concentration. Accordingly, fluoride exposure increased renal Kim-1, Clu and OPN mRNA expression levels. Moreover, there was a significant dose-dependent increase in urinary β-2-microglobulin and cystatin-C excretion rate. Additionally, a tendency towards a dose dependent increase of tubular damage in the histopathological light microscopy findings confirmed the preferential impact of fluoride on the tubular structure. All of these changes occurred at early stages in which, the renal function was not altered. In conclusion using early and sensitive biomarkers of kidney injury, we were able to found proximal tubular alterations in rats sub-chronically exposed to fluoride. - Highlights: • Exposure to low concentrations of fluoride induced proximal tubular injury • Increase in urinary Kim-1, Clu, OPN and Hsp72 in 50 ppm fluoride-exposed group • Increase in urinary B2M and CysC in 15 and 50 ppm fluoride-exposed groups • Fluoride exposure increased renal Kim, Clu and OPN mRNA expression levels.

  14. Elevated fluoride levels and periostitis in pediatric hematopoietic stem cell transplant recipients receiving long-term voriconazole.

    Science.gov (United States)

    Tarlock, Katherine; Johnson, Darren; Cornell, Cathy; Parnell, Shawn; Meshinchi, Soheil; Baker, K Scott; Englund, Janet A

    2015-05-01

    Azole therapy is widely utilized in hematopoietic stem cell transplant (HCT) recipients for the treatment of aspergillus. Complications of voriconazole treatment related to its elevated fluoride content have been described in adults, including reports of symptomatic skeletal fluorosis. We review fluoride levels, clinical, and laboratory data in five pediatric HCT recipients on long-term voriconazole therapy, all found to have elevated serum fluoride levels. Two patients had toxic fluoride levels, one infant had symptoms of significant pain with movement and radiographs confirmed skeletal fluorosis. Monitoring fluoride levels in children, especially with skeletal symptoms, should be considered in patients on long-term voriconazole.

  15. An In-Vitro Study on the Release of Fluoride from Two Restorative Materials and Their Rechargeability after Exposure to Daily 1000 ppm Fluoride

    Directory of Open Access Journals (Sweden)

    A. Kowsari

    2005-09-01

    Full Text Available Statement of Problem: Since the fluoride releases from materials with the property of releasing fluoride are decreasing gradually, it seems that probably the material rechargeability is more important than their long-term fluoride release.Purpose: the objective of this study was to asses the fluoride release and rechargeability of 2 types of fluoride releasing restorative materials, a resin modified glass ionomer(Vitremer and a compomer (Compoglass F, after exposure to daily NaF solutionscontaining 1000 ppm F, for 1 minute.Materials and Methods: Twelve discs ( 8 mm ×2 mm of each of the materials were fabricated, and divided into 2 groups (test and control. All discs were stored in 4 mL artificial saliva at 37°C. In group 1 (N=6, the specimens were immersed in artificialsaliva which was changed daily for 25 days. In group 2 (N=6, in addition to receiving the same treatment as group 1, the specimens were immersed in NaF solution (1000ppm F, ph=6.9 for 1 minute before daily saliva change. A potentiometer was used to determine the amount of fluoride released on days 1, 2, 3, 5, 10, 15, 20 and 25, after the daily saliva change, in all study groups. Data were analyzed by the t-student test after confirmation of the equality of variances by Leven’s test.Results: Both materials continued releasing fluoride throughout the whole study period. For each material, the release was highest on day one. During the first 3 days,glass ionomer released significantly higher amounts of fluoride as compared to compomer (p0.05. After exposure to NaF solution, none of the materials showed statistically significant rechargeability (p>0.05 and the amount of fluoride-releasecontinued to drop during the study period in similar patterns for both the test and the control groups.Conclusion: It may be concluded that rechargeability of glass ionomer and compomer,using daily neutral fluoride mouth rinses and toothpastes does not occur in reliable amounts.

  16. Status of industrial fluoride pollution and its diverse adverse health effects in man and domestic animals in India.

    Science.gov (United States)

    Choubisa, Shanti Lal; Choubisa, Darshana

    2016-04-01

    Hydrofluorosis in humans and domestic animals is a worldwide health problem and caused by a prolonged period of fluoride exposure through drinking of fluoride contaminated water. But in recent years, due to rapid industrialization in India, diverse serious health problems among industrial workers and residents and domestic animals living in the industrial areas due to fluoride pollution are on the rise. A number of coal-burning and industrial activities such as power-generating stations, welding operations and the manufacturing or production of steel, iron, aluminum, zinc, phosphorus, chemical fertilizers, bricks, glass, plastic, cement, and hydrofluoric acid are generally discharging fluoride in both gaseous and particulate/dust forms into surrounding environments which create a industrial fluoride pollution and are an important cause of occupational exposure to fluoride in several countries including India. An industrial emitted fluoride contaminates not only surrounding soil, air, and water but also vegetation, crops and many other biotic communities on which man and animals are generally dependants for food. Long- time of inhalation or ingestion of industrial fluoride also causes serious health problems in the forms of industrial and neighborhood fluorosis. In India, whatever research works conducted so far on the chronic industrial fluoride intoxication or poisoning (industrial and neighborhood fluorosis) in man and various species of domestic animals due to a prolonged period of industrial fluoride exposure or pollution (contamination) are critically reviewed in the present communication. Simultaneously, we are also focused the various bio-indicators and bio-markers for chronic industrial fluoride intoxication or pollution.

  17. Health impact of supplying safe drinking water containing fluoride below permissible level on flourosis patients in a fluoride-endemic rural area of West Bengal

    Directory of Open Access Journals (Sweden)

    Kunal Kanti Majumdar

    2011-01-01

    Full Text Available Background: The problem of high fluoride concentration in groundwater resources has become one of the most important toxicological and geo-environmental issues in India. Excessive fluoride in drinking water causes dental and skeletal fluorosis, which is encountered in endemic proportions in several parts of the world. World Health Organization (WHO guideline value and the permissible limit of fluoride as per Bureau of Indian Standard (BIS is 1.5 mg/L. About 20 states of India, including 43 blocks of seven districts of West Bengal, were identified as endemic for fluorosis and about 66 million people in these regions are at risk of fluoride contamination. Studies showed that withdrawal of sources identified for fluoride often leads reduction of fluoride in the body fluids (re-testing urine and serum after a week or 10 days and results in the disappearance of non-skeletal fluorosis within a short duration of 10-15 days. Objective: To determine the prevalence of signs and symptoms of suspected dental, skeletal, and non-skeletal fluorosis, along with food habits, addictions, and use of fluoride containing toothpaste among participants taking water with fluoride concentration above the permissible limit, and to assess the changes in clinical manifestations of the above participants after they started consuming safe drinking water. Materials and Methods: A longitudinal intervention study was conducted in three villages in Rampurhat Block I of Birbhum district of West Bengal to assess the occurrence of various dental, skeletal, and non-skeletal manifestations of fluorosis, along with food habits, addictions, and use of fluoride containing toothpaste among the study population and the impact of taking safe water from the supplied domestic and community filters on these clinical manifestations. The impact was studied by follow-up examination of the participants for 5 months to determine the changes in clinical manifestations of the above participants

  18. Organ-wise accumulation of fluoride in Prosopis juliflora and its potential for phytoremediation of fluoride contaminated soil.

    Science.gov (United States)

    Saini, Poonam; Khan, Suphiya; Baunthiyal, Mamta; Sharma, Vinay

    2012-10-01

    Fluoride (F) contamination is a global environmental problem, as there is no cure of fluorosis available yet. Prosopis juliflora is a leguminous perennial, phreatophyte tree, widely distributed in arid and semi-arid regions of world. It extensively grows in F endemic areas of Rajasthan (India) and has been known as a "green" solution to decontaminate cadmium, chromium and copper contaminated soils. This study aims to check the tolerance potential of P. juliflora to accumulate fluoride. For this work, P. juliflora seedlings were grown for 75 d on soilrite under five different concentrations of F viz., control, 25, 50, 75 and 100 mg NaF kg(-1). Organ-wise accumulation of F, bioaccumulation factor (BF), translocation factor (TF), growth ratio (GR) and F tolerance index (TI) were examined. Plant accumulated high amounts of F in roots. The organ-wise distribution showed an accumulation 4.41 mg kg(-1)dw, 12.97 mg kg(-1)dw and 16.75 mg kg(-1)dw F, in stem, leaves and roots respectively. The results indicated significant translocation of F from root into aerial parts. The bioaccumulation and translocation factor values (>1.0) showed high accumulation efficiency and tolerance of P. juliflora to F. It is concluded that P. juliflora is a suitable candidate for phytoremediation purpose and can be explored further for the decontamination of F polluted soils.

  19. An Investigation of Fluoride Concentration in Drinking Water of Sanganer Tehsil, Jaipur District, Rajasthan, India and Defluoridation from Plant Material

    Directory of Open Access Journals (Sweden)

    Mohammed Arif

    2014-01-01

    Full Text Available Forty water samples of 20 villages of Sanganer tehsil, Jaipur district were analyzed for determining fluoride ion concentrations. High fluoride containing regions were identified on the basis of fluoride levels of the water samples and also on the prevalence rate of dental and skeletal fluorosis of the study area. Fluoride maps, which distinguish the regions containing the water sources of different ranges of fluoride ion concentrations, were also prepared by isopleth’s technique, a statistical method. Water samples containing high fluoride levels were defluoridated with low-cost materials prepared from plant byproducts. These materials successfully decrease the fluoride ions concentration to an acceptable limit (from 0.5 to 1.5 mg/L without disturbing drinking water quality standards.

  20. The influence of food store and process on fluoride pollution in endemic area of coalsmoke-borne endemic fluorosis

    Energy Technology Data Exchange (ETDEWEB)

    Liu Xiao Li; Fan Zhong Xue; Zheng Lai Yi; Li Xiao Qian; Li Ping An; Li Yue; Bai Ai Mei [Shaanxi Institute for Endemic Disease Control and Research, Xi' an (China)

    2003-07-01

    The results showed the level of fluoride in red pepper dried by roasting with smoke of fluoride-rich coal was higher than those under sunshine (P {lt} 0.01). The level of fluoride in corn without cover and some of the unpacked red pepper were a little higher than those of the packed ones. Fluoride level in corn hanging on the walls of the kitchen was higher than those found inside the room. Fluoride level in corn and in rice with husk in families with unimproved stoves was higher than in families with improved stoves (P {lt} 0.05). Fluoride level in rice with husk kept for 15 months was higher than those kept for 3 months (P {lt} 0.01). The level of fluoride in corn after processing had no difference, but for the rice with husk, there was a remarkable difference (P {lt} 0.01). 2 refs.

  1. First-principles molecular dynamics modeling of the molten fluoride salt with Cr solute

    Energy Technology Data Exchange (ETDEWEB)

    Nam, H.O.; Bengtson, A.; Vörtler, K.; Saha, S.; Sakidja, R.; Morgan, D., E-mail: ddmorgan@wisc.edu

    2014-06-01

    Fluoride salts and their interactions with metals are of wide interest for the nuclear community. In this work, first-principles molecular dynamics (FPMD) was employed to study both pure molten fluoride salt and fluoride salt with dissolved solute Cr ions (a common corrosion product) at high temperature (823–1423 K). Two types of molten fluoride salts, namely flibe (LiF–BeF{sub 2}) and flinak (LiF–NaF–KF), with the Cr{sup 0}, Cr{sup 2+} and Cr{sup 3+} ions were chosen as a target system for the FPMD modeling. The prediction of thermo-kinetic properties of pure fluoride salt, such as the equilibrium volume, density, bulk modulus, coefficient of thermal expansion, and self-diffusion coefficient, provide useful extensions of existing data and verify the accuracy of the FPMD simulation in modeling of fluoride salts. The FPMD modeling of solute Cr in fluoride salt shows the effect of Cr valence on diffusivity and local structure in the salt.

  2. Effect of a short period of fluoride ingestion on dental fluorosis in cattle

    Energy Technology Data Exchange (ETDEWEB)

    Suttie, J.W.; Faltin, E.C.

    1971-02-01

    The effects of the ingestion of 2.5 mg of fluoride per kilogram of body weight by dairy heifers during their 13th to 15th or 16th to 18th months of age were studied. This short-term exposure was sufficient to cause severe dental fluorosis in at least one pair of incisors, especially in the 2nd group of heifers, even though the total fluoride intake was not excessive. The plasma fluoride concentrations rapidly increased to 0.5 ppm in both groups of heifers and decreased rapidly after fluoride was removed from the ration. Evidence of dental fluorosis was seen when crown formation was completed before exposure to fluoride and also when the fluoride exposure preceded any calcification of the crown. The most severe effects were seen when the exposure coincided with the initiation of crown formation for a particular incisor. Fluoride analysis of consecutive chronologic sections of the avascular enamel indicated that there was a regular pattern of enamel apposition from the top to the bottom of the crown of one incisor before the top of the crown of the next incisor calcified. 13 references, 3 figures, 3 tables.

  3. Professionally applied fluoride gel in low-caries 10.5-year-olds.

    Science.gov (United States)

    Truin, G J; van 't Hof, M A

    2005-05-01

    The question has been raised whether low-caries children regularly using fluoride toothpaste will benefit from the professional application of additional fluoride gel. To investigate the caries-reducing effect of semi-annually-applied neutral 1% sodium fluoride gel, we carried out a double-blind randomized controlled clinical trial (n = 594) in a child population, initially aged 9.5-11.5 years, with baseline caries experience of D3MFS = 0 (decayed, missing, and filled tooth surfaces of permanent teeth). The mean number of tooth surfaces saved from caries development by fluoride gel application after 4 years was 0.2 D3MFS (SE = 0.17). The preventive fraction (PF) showed a mean relative effect of professionally applied fluoride gel of 18%. The cariostatic effect of the fluoride gel on pits and fissures would have been influenced by the sealant strategy in the study. Professionally applied fluoride gel showed no statistically significant effect on mean D3MFS score in low-caries 9.5- to 11.5-year-olds.

  4. Enamel microhardness and fluoride uptake underneath fermenting and non-fermenting artificial plaque.

    Science.gov (United States)

    Turtola, L O

    1977-09-01

    Washed cells of Streptococcus sanguis were used to form artificial plaque on the surface of bovine enamel and incubated underneath buffer solutions, initial pH 6, for 36 h at 37 degrees C. The decrease in the microhardness of the enamel surface under fermenting "plaque" could be prevented with fluoride. Enamel under a fermenting "plaque" took up significantly more (P less than 0.0u) fluoride than enamel under a non-fermenting "plaque" (initial F- in buffer: 10 parts/10(6)). The artificial plaque did not accumulate fluoride. Within fermenting "plaques/, the pH decreased significantly more without flouride (P less than 0.01) than with fluoride. Fluoride combined with sucrose more than negated the softening of the enamel caused by sucrose fermentation, i.e. it increased the hardness above the original values. The diffusion of fluoride through the fermenting artificial plaque was more rapid than through a non-fermenting plaque. These findings suggest that caries-conducive circumstances may promote fluoride uptake by enamel compared with non-caries-conducive circumstances.

  5. Enhancement of Saharan groundwater quality by reducing its fluoride concentration using different materials

    KAUST Repository

    Ramdani, Amina

    2014-04-15

    According to the environmental protection regulations, fluoride concentration is considered as a substance of priority for assessment of drinking water quality to determine their impacts on the environment and public health. Saharan groundwater (Algeria) contains an excess of fluoride ions. Regular consumption of this water by the population of the region may cause endemic fluorosis. To solve this problem, we propose to treat this water by adsorption on different materials, such as activated alumina (AA), sodium clay (SC), and hydroxyapatite (HAP) in order to enhance its quality by reducing its fluoride concentration. The maximum adsorption is achieved with an adsorption capacity of the order of 0.9, 0.667, and 0.370 mg/g and with a percentage of 90, 83.4, and 73.95% for AA, HAP, and SC, respectively. Indeed, the acidity and alkalinity of the medium significantly affect the adsorption of fluoride ions. Results deduced from the curves of adsorption isotherms of fluoride ions showed that the retention is predictable from these isotherms in agreement with the Langmuir model. The low removal of fluoride ions was observed in presence of (Formula presented.), (Formula presented.), and (Formula presented.) ions. Finally, AA material proved to be the best adsorbent for fluoride ions removal. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

  6. Fluoride Content of Bottled Drinking Water Available in North West of Iran

    Directory of Open Access Journals (Sweden)

    Reza Fouladi Fard

    2015-06-01

    Full Text Available Background: Consumption of bottled waters has received popularity and more acceptances. Fluoride is necessary for human life. But high levels of fluoride can cause some problems for human health such as Fluorosis and teeth and bones problems. The aim of this study is measure the fluoride content in bottled waters consumed in North West of Iran and comparison with the amount listed on their labels and with the drinking water standards. Methods: In this study, 10 brands of bottled water were sampled from markets over the two seasons randomly. Samples were analyzed for fluoride using Ion Chromatography (IC method. Results: Results showed that fluoride concentration in different brands had a significant difference (P <0.05. The concentration of fluoride in samples ranged between 0.04 and 0.32 mg/L. Among analyzed selected brands four brands were observed significant differences with the measured values. Conclusion:  Totally the measured values didn’t match with the values declared on the labels (Reliability coefficient <0. It was revealed that fluoride concentration in all brands was less than the lower range of Iranian national standard (0.7-1.2 mg/lit.

  7. Fluoride Intake through Consumption of Tap Water and Bottled Water in Belgium

    Directory of Open Access Journals (Sweden)

    Herman van Oyen

    2009-05-01

    Full Text Available There is a tendency to align higher levels of fluoride in natural mineral water with the existing higher levels in tap water. Treatment of natural mineral waters could harm the preservation of their natural character. In this study fluoride intake through bottled and tap water consumption in the Belgian adult population was assessed, taking into account regional differences. A deterministic approach was used whereby consumption quantities of tap water and different brands of bottled water were linked with their respective fluoride concentrations. Data from the national food consumption survey (2004 were used and the Nusser methodology was applied to obtain usual intake estimates. Mean intake of fluoride through total water consumption in Flanders was 1.4±0.7 mg/day (97.5th percentile: 3.1 mg/day, while in the Walloon region it was on average 0.9±0.6 mg/day (97.5th percentile: 2.4 mg/day. The probability of exceeding the UL of 7 mg per day via a normal diet was estimated to be low. Consequently, there is no need to revise the existing norms, but higher fluoride concentrations should be more clearly indicated on the labels. Reliable data about total dietary fluoride intake in children, including intake of fluoride via tooth paste and food supplements, are needed.

  8. INTERACTION OF FLUORIDE COMPLEXES DERIVED FROM GLASS-IONOMER CEMENTS WITH HYDROXYAPATITE

    Directory of Open Access Journals (Sweden)

    Lewis S. M.

    2013-09-01

    Full Text Available A study has been undertaken of the interaction of complexed fluoride extracted from glass-ionomer dental cements with synthetic hydroxyapatite powder. Extracts were prepared from two commercial glass-ionomers (Fuji IX and ChemFlex under both neutral and acidic conditions. They were analysed by ICP-OES and by fluoride-ion selective electrode with and without added TISAB to decomplex the fluoride. The pH of the acid extracts was 4, conditions under which fluoride complexes with protons as HF or HF2-, it also complexes with aluminium, which was found to be present in higher amounts in the acid extracts. Fluoride was found to be almost completely complexed in acid extracts, but not in neutral extracts, which contained free fluoride ions. Exposure of these extracts to synthetic hydroxyapatite powder showed that fluoride was taken up rapidly (within 5 minutes, whether or not it was complexed. SEM (EDAX study of recovered hydroxyapatite showed only minute traces of aluminium taken up under all conditions. This showed that aluminium interacts hardly at all with hydroxyapatite, and hence is probably not involved in the remineralisation process.

  9. Investigation of high-temperature materials for uranium-fluoride-based gas core reactor systems

    Energy Technology Data Exchange (ETDEWEB)

    Collins, C.; Wang, S.C.P.; Anghaie, S.

    1988-01-01

    The development of the uranium-fluoride-based gas core reactor (GCR) systems will depend on the availability of wall materials that can survive the severe thermal, chemical, and nuclear environments of these systems. In the GCR system, the fuel/working fluid chemical constituents include enriched uranium fluorides UF{sub n} (n = 1 to 4) and fluorides operating at gas pressures of {approx}1 to 100 atm. The peak temperature of the fissioning gas/working fluid in the system can be 4000 K or higher, and the temperatures of the inner surface of the construction wall may exceed 1500 K. Wall materials that can be compatible in this environment must possess high melting points, good resistance to creep and thermal shock, and high resistance to fluorination. Compatible materials that feature high fluorination resistance are those that either do not react with fluorine/fluoride gases or those that can form a protective fluoride scale, which prevents or reduces further attack by the corrosive gas. Because fluorine and fluoride gases are strong oxidizing agents, formation of high melting point protective scales on substrate materials is more likely to be expected. This paper summarizes results of corrosion testing for evaluation of materials compatibility with uranium fluoride. These tests have been carried out by exposing different materials to UF{sub 6} gas in a closed capsule at temperatures up to 1500 K. Past exposure examinations were conducted to determine the morphology and composition of scales that were formed.

  10. Effects of hydrogen fluoride on plant-pathogen interactions. [Lycopersicon esculentum; Phaseolus vulgaris

    Energy Technology Data Exchange (ETDEWEB)

    McCune, D.C.; Weinstein, L.H.; Mancini, J.F.; van Lueken, P.

    1973-01-01

    Experiments in fumigation chambers with tomato (Lycopersicon esculentum) and pinto bean (Phaseolus vulgaris) plants were performed to assess the effects of hydrogen fluoride on plant-pathogen (fungal and bacterial) interactions. Hydrogen fluoride was found to alter the plant-pathogen interaction, although the kind and consistency of effect caused by HF depended upon the host, pathogen, and several other factors. A reduction in powdery mildew probably indicates that HF was affecting the infectivity of the pathogen itself because reduction in disease was proportional to the length of the exposure period, infection was continuous during the exposure period, and the pathogen itself was epiphytic. The effect of fluoride on bean rust may have been due to accumulated fluoride in the leaf having a direct or indirect effect on the pathogen because both pre- and post-inoculation exposures to HF were effective and additive. Other evidence for an indirect effect of fluoride was found in halo-blight where stem collapse was affected but foliar symptoms were not, and the site affected was spatially removed from the site of fluoride accumulation. Effects on early blight of tomato also indicated an effect of fluoride in the leaf.

  11. Hand-held water fluoride analysis: An accessible caries prevention tool for dental professionals.

    Science.gov (United States)

    Quock, Ryan L; Yank, Stephanie W; Chan, Jarvis T

    2011-01-01

    This study sought to compare the relative accuracy of a commercially available hand-held water fluoride analysis unit with a standard laboratory bench-top fluoride-specific electrode/millivoltmeter apparatus, with the goal of identifying possible practical applications of the hand-held unit for preventive dentistry. The units analyzed identical gravimetrically prepared fluoride solutions ranging from 0.1 to 4.0 ppm. The average difference between the measurements from the hand-held unit and the nominal values of the fluoride solutions was 0.011 ppm (SD = 0.068), and the average difference between the hand-held unit's measurements and the bench-top unit's measurements was 0.030 ppm (SD = 0.115). T-test analysis demonstrated no statistical difference between measurements from the hand-held unit with either the nominal values of the fluoride solutions or the bench-top unit's measurements. Results indicate that the hand-held water fluoride analysis unit has an appropriate level of accuracy for the measurement of fluoride levels in drinking water samples by dental professionals.

  12. Removal of Fluoride from Drinking Water Using Modified Immobilized Activated Alumina

    Directory of Open Access Journals (Sweden)

    Aneeza Rafique

    2013-01-01

    Full Text Available The study describes the removal of fluoride from drinking water using modified immobilized activated alumina (MIAA prepared by sol-gel method. The modification was done by adding a specific amount of alum during the sol formation step. The fluoride removal efficiency of MIAA was 1.35 times higher as compared to normal immobilized activated alumina. A batch adsorption study was performed as a function of adsorbent dose, contact time, stirring rate, and initial fluoride concentration. More than 90% removal of fluoride was achieved within 60 minutes of contact time. The adsorption potential of MIAA was compared with activated charcoal which showed that the removal efficiency was about 10% more than the activated charcoal. Both the Langmuir and Freundlich adsorption isotherms fitted well for the fluoride adsorption on MIAA with the regression coefficient R2 of 0.99 and 0.98, respectively. MIAA can both be regenerated thermally and chemically. Adsorption experiments using MIAA were employed on real drinking water samples from a fluoride affected area. The study showed that modified immobilized activated alumina is an effective adsorbent for fluoride removal.

  13. The Public Health Reach of High Fluoride Vehicles: Examples of Innovative Approaches.

    Science.gov (United States)

    Tellez, Marisol; Wolff, Mark S

    2016-01-01

    Fluorides and sealants have been shown to reduce caries in populations, making fluoride interventions a large part of the dental public health effort. Although public health programs have traditionally focused on fluoride vehicles delivering less than 1,000 ppm of fluoride, more recent efforts have shifted toward the use of high fluoride vehicles such as varnishes and prescription toothpastes. In the USA, states are developing innovative strategies to increase access to dental services by using primary care medical providers to deliver early preventive services as part of well-child care visits. Currently, Medicaid programs in 43 states reimburse medical providers for preventive services including varnish application. Still, there is uncertainty about the cost-effectiveness of such interventions. In many resource-strained environments, with shortages of dental health care providers, lack of fluoridated water and lower dental awareness, it is necessary to develop sustainable programs utilizing already established programs, like primary school education, where caries prevention may be set as a priority. Dental caries among the elderly is an ongoing complex problem. The 5,000-ppm F toothpaste may be a reasonable approach for developing public health programs where root caries control is the main concern. Fluoride varnish and high concentration fluoride toothpaste are attractive because they can easily be incorporated into well-child visits and community-based geriatric programs. Additional research on the effectiveness and costs associated with population-based programs of this nature for high risk groups is needed, especially in areas where a community-based fluoride delivery program is not available.

  14. Effect of Enamel Caries Lesion Baseline Severity on Fluoride Dose-Response

    Directory of Open Access Journals (Sweden)

    Frank Lippert

    2017-01-01

    Full Text Available This study aimed to investigate the effect of enamel caries lesion baseline severity on fluoride dose-response under pH cycling conditions. Early caries lesions were created in human enamel specimens at four different severities (8, 16, 24, and 36 h. Lesions were allocated to treatment groups (0, 83, and 367 ppm fluoride as sodium fluoride based on Vickers surface microhardness (VHN and pH cycled for 5 d. The cycling model comprised 3 × 1 min fluoride treatments sandwiched between 2 × 60 min demineralization challenges with specimens stored in artificial saliva in between. VHN was measured again and changes versus lesion baseline were calculated (ΔVHN. Data were analyzed using two-way ANOVA (p<0.05. Increased demineralization times led to increased surface softening. The lesion severity×fluoride concentration interaction was significant (p<0.001. Fluoride dose-response was observed in all groups. Lesions initially demineralized for 16 and 8 h showed similar overall rehardening (ΔVHN and more than 24 and 36 h lesions, which were similar. The 8 h lesions showed the greatest fluoride response differential (367 versus 0 ppm F which diminished with increasing lesion baseline severity. The extent of rehardening as a result of the 0 ppm F treatment increased with increasing lesion baseline severity, whereas it decreased for the fluoride treatments. In conclusion, lesion baseline severity impacts the extent of the fluoride dose-response.

  15. Fluoride accumulation and toxicity in grapevines Vitis vinifera L. in New South Wales

    Energy Technology Data Exchange (ETDEWEB)

    Leece, D.R.; Scheltema, J.H.; Anttonen, T.; Weir, R.G.

    1986-01-01

    The accumulation of fluoride by fully expanded basal leaves of grapevines was measured through two seasons in ten vineyards 9-25 km downwind of an aluminium smelter near Cessnock. Accumulation was linear with time until mid-summer then declined somewhat as leaves aged. Heavy rainfall and lowered emissions reduced accumulation. The impact of fluoride on the vines each season could be readily assessed from the leaf fluoride concentration in January, just prior to harvest. Fluoride accumulation by grapevines was assessed in four districts each January from 1981 to 1983. At Griffith and Mudgee, two districts which lacked an industrial source of fluoride, vine leaves did not accumulate fluoride (< 2..mu..g Fg/sup -1/). At Muswellbrook, vines growing 15-37 km downwind of a power station generally had slightly elevated leaf fluoride concentrations (1-10 ..mu..g Fg/sup -1/), but certain higher values were recorded (18-27 ..mu..g Fg/sup -1/) in vineyards under the direct influence of the plume. These higher values did not produce leaf necrosis. At Cessnock, 9-23 km downwind of the aluminium smelter, elevated leaf fluoride concentrations (4-42 ..mu..g Fg/sup -1/) were also recorded, with highest levels 9-11 km from the smelter. These levels did not produce leaf necrosis in well managed vineyards. In certain non-irrigated vineyards, fluoride accumulation was retarded by water-deficit stress when experienced throughout the growing season. In contrast, where severe water-deficit stress was not experienced until mid-summer, certain leaves which had accumulated 26-36 ..mu..g Fg/sup -1/ developed marginal necrotic lesions which reduced effective leaf photosynthetic area by 5-10%.

  16. Prevalence of fluorosis and identification of fluoride endemic areas in Manur block of Tirunelveli District, Tamil Nadu, South India

    Science.gov (United States)

    Gopalakrishnan, Subarayan Bothi; Viswanathan, Gopalan; Siva Ilango, S.

    2012-12-01

    Prevalence of fluorosis is mainly due to the consumption of more fluoride through drinking water. It is necessary to identify the fluoride endemic areas to adopt remedial measures for the people under the risk of fluorosis. The objectives of this study were to identify the exact location of fluoride endemic areas in Manur block of Tirunelveli District and to estimate fluoride exposure level through drinking water for different age groups. Identification of fluoride endemic areas was performed through Isopleth and Google earth mapping techniques. Fluoride level in drinking water samples was estimated by fluoride ion selective electrode method. A systematic clinical survey conducted in 19 villages of Manur block revealed the rate of prevalence of fluorosis. From this study, it has been found that Alavanthankulam, Melapilliyarkulam, Keezhapilliyarkulam, Nadupilliyarkulam, Keezhathenkalam and Papankulam are the fluoride endemic villages, where the fluoride level in drinking water is above 1 mg/l. Consumption of maximum fluoride exposure levels of 0.30 mg/kg/day for infants, 0.27 mg/kg/day for children and 0.15 mg/kg/day for adults were found among the respective age group people residing in high fluoride endemic area. As compared with adequate intake level of fluoride of 0.01 mg/kg/day for infants and 0.05 mg/kg/day for other age groups, the health risk due to excess fluoride intake to the people of Alavanthankulam and nearby areas has become evident. Hence the people of these areas are advised to consume drinking water with optimal fluoride to avoid further fluorosis risks.

  17. Antibacterial and antibiofilm properties of yttrium fluoride nanoparticles

    Directory of Open Access Journals (Sweden)

    Lellouche J

    2012-11-01

    Full Text Available Jonathan Lellouche,1,2 Alexandra Friedman,2 Aharon Gedanken,2 Ehud Banin11Biofilm Research Laboratory, The Mina and Everard Goodman Faculty of Life Sciences, 2Kanbar Laboratory for Nanomaterials, Department of Chemistry, Institute for Nanotechnology and Advanced Materials, Bar-Ilan University, Ramat-Gan, IsraelAbstract: Antibiotic resistance has prompted the search for new agents that can inhibit bacterial growth. Moreover, colonization of abiotic surfaces by microorganisms and the formation of biofilms is a major cause of infections associated with medical implants, resulting in prolonged hospitalization periods and patient mortality. In this study we describe a water-based synthesis of yttrium fluoride (YF3 nanoparticles (NPs using sonochemistry. The sonochemical irradiation of an aqueous solution of yttrium (III acetate tetrahydrate [Y(Ac3 • (H2O4], containing acidic HF as the fluorine ion source, yielded nanocrystalline needle-shaped YF3 particles. The obtained NPs were characterized by scanning electron microscopy and X-ray elemental analysis. NP crystallinity was confirmed by electron and powder X-ray diffractions. YF3 NPs showed antibacterial properties against two common bacterial pathogens (Escherichia coli and Staphylococcus aureus at a µg/mL range. We were also able to demonstrate that antimicrobial activity was dependent on NP size. In addition, catheters were surface modified with YF3 NPs using a one-step synthesis and coating process. The coating procedure yielded a homogeneous YF3 NP layer on the catheter, as analyzed by scanning electron microscopy and energy dispersive spectroscopy. These YF3 NP-modified catheters were investigated for their ability to restrict bacterial biofilm formation. The YF3 NP-coated catheters were able to significantly reduce bacterial colonization compared to the uncoated surface. Taken together, our results highlight the potential to further develop the concept of utilizing these metal fluoride NPs

  18. Histochemical pattern of gastrocnemius muscle in fluoride toxicity syndrome

    Institute of Scientific and Technical Information of China (English)

    Shashi A; Bhushan B; Bhardwaj M

    2010-01-01

    Objective:To evaluate the effect of sodium fluoride (NaF) on cytochemical distribution of proteins, DNA, and RNA in the gastrocnemius muscle of rat in experimental fluorosis.Methods:Young Sprague Dawley albino rats were administered with NaF at 30, 45, and 75 mg/kg bw/day subcutaneously for 15 and 30 days, respectively. The control animals were given the vehicle (1cc deionized double distilled water/kg bw/day).Results: In the first phase of 15 days experimentation, the gastrocnemius muscle of rats intoxicated with NaF at 30, 45, and 75 mg /kg bw/ day showed decline in proteins includingαamino acids as compared to control. In the second phase of 30 days experimentation, the muscle fibers of rat showed elevation in sarcolemmal and sarcoplasmic proteins in 30 mg NaF dose group, and angulated fibers exhibited increase in sarcolemmal proteins in 45 mg NaF group. The marginal regions of angular and rim fibers showed deeply stained rings of sarcoplasmic proteins whereas the split fibers were faintly stained in rats treated with NaF at 75 mg/kg bw/day for 30 days. In rats treated with NaF at 30 mg/kg bw/day for 15 days, the hypertrophied peripheral muscle fibers contained more DNA, however the atrophied fibers had more RNA. In 45 mg NaF group, RNA was located in sarcolemmal regions, while DNA content decreased as compared to control. In 75 mg NaF group, the muscle fibers had dark and light staining regions of DNA and RNA. In the 30 days of experimentation, the DNA level decreased whereas RNA content increased in the gastrocnemius muscle fibers of the rat treated with NaF at 30 mg/kg bw/day. In treatment group with NaF at 45 mg/kg bw/day, the RNA content slightly declined in comparison to control, in all treatments for 15 days as well as in treatment group with NaF at 30 mg/kg bw/day for 30 days whereas the amount of DNA slightly increased as compared to treatment group with NaF at 75 mg/kg bw/day for 15 days. The highest dose group revealed elevated amount of RNA whereas

  19. Lithological Influences on Occurrence of High-Fluoride Waters in The Central Kenya Rift

    Science.gov (United States)

    Olaka, L. A.; Musolff, A.; Mulch, A.; Olago, D.; Odada, E. O.

    2013-12-01

    Within the East African rift, groundwater recharge results from the complex interplay of geology, land cover, geomorphology, climate and on going volcano-tectonic processes across a broad range of spatial and temporal scales. The interrelationships between these factors create complex patterns of water availability, reliability and quality. The hydrochemical evolution of the waters is further complex due to the different climatic regimes and geothermal processes going on in this area. High fluoridic waters within the rift have been reported by few studies, while dental fluorosis is high among the inhabitants of the rift. The natural sources of fluoride in waters can be from weathering of fluorine bearing minerals in rocks, volcanic or fumarolic activities. Fluoride concentration in water depends on a number of factors including pH, temperature, time of water-rock formation contact and geochemical processes. Knowledge of the sources and dispersion of fluoride in both surface and groundwaters within the central Kenya rift and seasonal variations between wet and dry seasons is still poor. The Central Kenya rift is marked by active tectonics, volcanic activity and fumarolic activity, the rocks are majorly volcanics: rhyolites, tuffs, basalts, phonolites, ashes and agglomerates some are highly fractured. Major NW-SE faults bound the rift escarpment while the rift floor is marked by N-S striking faults We combine petrographic, hydrochemistry and structural information to determine the sources and enrichment pathways of high fluoridic waters within the Naivasha catchment. A total of 120 water samples for both the dry season (January-February2012) and after wet season (June-July 2013) from springs, rivers, lakes, hand dug wells, fumaroles and boreholes within the Naivasha catchment are collected and analysed for fluoride, physicochemical parameters and stable isotopes (δ2 H, δ18 O) in order to determine the origin and evolution of the waters. Additionally, 30 soil and

  20. Indices of atmospheric purity and fluoride pollution pattern in Arvida, Quebec

    Energy Technology Data Exchange (ETDEWEB)

    LeBlanc, F.; Rao, D.N.; Comeau, G.

    1972-01-01

    Indices of atmospheric purity (IAP) of 42 sites located in all directions from the aluminum factory at Arvida and spread out in about 250-km/sup 2/ area, were determined on the basis of phytosociology of epiphytes of Populus balsamifera. These index values ranging from 0 to 103 were arranged into six groups and the investigated area was accordingly delineated into six IAP zones to represent areas with different levels of fluoride pollution. A relative picture of the approximate limits of fluoride contamination in different zones is obtained by the fluoride accumulation in Parmelia sulcata thalli transplanted at various sites in the area.

  1. Effect of sodium fluoride on phytase activity during germination of Pisum sativum L. seeds

    Energy Technology Data Exchange (ETDEWEB)

    Hauskrecht, I.

    1972-01-01

    The effects of fluoride ion, in concentrations varying from 0 to 4 mM F/sup -/, on phytase activity in the course of germination of Pisum sativum L. seeds and in the course of incubation in vitro are reported. The fluoride ion in 1 mM concentration cause a significant 80% decrease of the phytase activity in the incubation medium and a 24% decrease in the course of germination. The inhibition of phytase, as well as its synthesis, by fluoride ion during germination may influence the metabolism of phosphorus at the initial stage of ontogenesis.

  2. Comparison of acidulated phosphate fluoride gel and hydrofluoric acid etchants for porcelain-composite repair.

    Science.gov (United States)

    Tylka, D F; Stewart, G P

    1994-08-01

    Hydrofluoric acid etches porcelain to produce a porous surface visible under scanning electron microscopy when compared to an acidulated phosphate fluoride gel. Some investigators have suggested the greater porosity of the hydrofluoric acid etch produces a greater composite-to-porcelain bond. This investigation tested that assumption with two common fluoride etchants. The etched surfaces were first viewed under scanning electron microscopy to ensure that a characteristic etch was achieved. Both etchants yielded bond strengths that produced cohesive failure of all samples. This suggested that the intraoral use of hydrofluoric acid is no more effective than the less dangerous acidulated phosphate fluoride gel.

  3. [Fluoride content in potable water and drinks. Connection with dental caries prevention and dental fluorosis].

    Science.gov (United States)

    Borinskiĭ, Iu N; Rumiantsev, V A; Borinskaia, E Iu; Beliaev, V V

    2009-01-01

    Content of fluoride by ion selective electrode in potable water (municipal water supply, bottled, from draw-wells and springs), in juices of industrial and compotes of domestic preparation, in drinks of various grades of the tea made by water with unequal contents of fluorine was analyzed. Fluoride entered organism of the population in non-control mode more often in minimum quantities that explained, in certain measures a wide caries incidence. Granting of the information upon concentration of fluorides in potable water, juices and drinks used by population would allow people to adjust this microelement intake in the organism with the purpose of preventing of dental caries and fluorosis.

  4. Hydrothermal synthesis of mixed rare earth-alkali metal or ammonium fluorides

    Institute of Scientific and Technical Information of China (English)

    由芳田; 黄世华; 时秋峰

    2010-01-01

    The recent results on hydrothermal synthesis of mixed rare earth-alkali or ammonium fluorides were presented. The initial ratios of the starting materials, pH value and reaction temperature were the critical factors for obtaining the single-phase product. Four main types of complex rare earth fluorides, AREF4, A2REF5, ARE2F7 and ARE3F10 (A=Na+, K+, Rb+, NH4+), appeared in the primary hydrothermal reactions. The correlation between cation sizes and the formation of mixed rare earth fluorides under mild hydro...

  5. Impact and remedial strategy of Fluoride in Ground Water – A Review

    OpenAIRE

    2014-01-01

    According to WHO report 20% of the fluoride-affected villages in the whole world are in India, viz 33,231 villages are affected by fluoride in the country. Drinking water with excessive concentration of fluoride causes fluorosis which progresses gradually and becomes a crippling malady in the long run. It affects people of all age group, rich, rural, and urban population. It has attained a very alarming dimension. Rajasthan suffers both the problems of quantity and quality of water. In most p...

  6. Synthesis of the Novel Fluoride-containing Organic Silane

    Institute of Scientific and Technical Information of China (English)

    WANG Shuiping; WENG Rui; WANG Chonghui; YANG Ping

    2009-01-01

    A fluoride-containing organic silane was synthesized by the reaction of N-ethyl-N-hydroxy-ethyl perfluorinated octyl sulfonamide(EHPOS),N-β-aminoethyl)-γ-aminopropyl trimethoxy silane(ATS)and cis-butenedioic anhydride(CA).The experimental results show that the yield of product is up to 87%when the molar ratio of EHPOS:CA:ATS is 1:1.05:1.1.EHPOS and CA were maintained at 115℃for 3 hours,then after cooling the reaction solution to 75℃,ATS was added and reacted for an-other 3.5 hours at 145℃.The structure of the productand thermal properties were characterized by Fourier transform infrared(FTIR)and thermogravimetric analysis(TGA),respectively.Results show that fluo-ride-containing organic silane has excellent thermal stability below 185℃.

  7. Preparation of Polyvinylidene Fluoride (PVDF Hollow Fiber Hemodialysis Membranes

    Directory of Open Access Journals (Sweden)

    Qinglei Zhang

    2014-02-01

    Full Text Available In this study, the polyvinylidene fluoride (PVDF hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS. The influences of PVDF membrane thickness and polyethylene glycol (PEG content on membrane morphologies, pore size, mechanical and permeable performance were investigated. It was found that membrane thickness and PEG content affected both the structure and performance of hollow fiber membranes. The tensile strength and rejection of bovine serum albumin (BSA increased with increasing membrane thickness, while the Ultrafiltration flux (UF flux of pure water was the opposite. The tensile strength, porosity and rejection of BSA increased with increasing PEG content within a certain range. Compared with commercial F60S membrane, the PVDF hollow fiber membrane showed higher mechanical and permeable performance. It was proven that PVDF material had better hydrophilicity and lower BSA adsorption, which was more suitable for hemodialysis. All the results indicate that PVDF hollow fiber membrane is promising as a hemodialysis membrane.

  8. Piezoelectric and dielectric properties of nanoporous polyvinylidence fluoride (PVDF) films

    Science.gov (United States)

    Zhao, Ping; Wang, Shifa; Kadlec, Alec

    2016-04-01

    A nanoporous polyvinylidene Fluoride (PVDF) thin film was developed for applications in energy harvesting, medical surgeries, and industrial robotics. This sponge-like nanoporous PVDF structure dramatically enhanced the piezoelectric effect because it yielded considerably large deformation under a small force. A casting-etching method was adopted to make films, which is effective to control the porosity, flexibility, and thickness of the film. The films with various Zinc Oxide (ZnO) mass fractions ranging from 10 to 50% were fabricated to investigate the porosity effect. The piezoelectric coefficient d33 as well as dielectric constant and loss of the films were characterized. The results were analyzed and the optimal design of the film with the right amount of ZnO nanoparticles was determined.

  9. Photon avalanche up-conversion in holmium doped fluoride glasses

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y.H.; Liu, G.K.; Beitz, J.V. [Argonne National Lab., IL (United States). Chemistry Division; Jie Wang [Shanghai Institute of Optics and Fine Mechanics, Shanghai (China)

    1996-08-01

    Photon avalanche green up-conversion emission centered at 545 nm has been observed in Ho{sup 3+} doped and Ho{sup 3+}, Tm{sup 3+} co-doped ZrF{sub 4}-based fluoride glasses when excited near 585 nm which is off resonance with any ground state absorption bands of either Ho{sup 3+} or Tm{sup 3+} ions. Detailed spectral measurements and analysis suggest that the 545 nm emission occurs from the {sup 5}S{sub 2},{sup 5}F{sub 4} states of Ho{sup 3+} that are populated by excited state absorption from the {sup 5}I{sub 7} state of Ho{sup 3+}. Strong cross-relaxation that efficiently populates the {sup 5}I{sub 7} state makes the photon avalanche process possible in this system.

  10. Graphitic carbon grown on fluorides by molecular beam epitaxy.

    Science.gov (United States)

    Jerng, Sahng-Kyoon; Lee, Jae Hong; Kim, Yong Seung; Chun, Seung-Hyun

    2013-01-03

    We study the growth mechanism of carbon molecules supplied by molecular beam epitaxy on fluoride substrates (MgF2, CaF2, and BaF2). All the carbon layers form graphitic carbon with different crystallinities depending on the cation. Especially, the growth on MgF2 results in the formation of nanocrystalline graphite (NCG). Such dependence on the cation is a new observation and calls for further systematic studies with other series of substrates. At the same growth temperature, the NCG on MgF2 has larger clusters than those on oxides. This is contrary to the general expectation because the bond strength of the carbon-fluorine bond is larger than that of the carbon-oxygen bond. Our results show that the growth of graphitic carbon does not simply depend on the chemical bonding between the carbon and the anion in the substrate.

  11. Research on polyvinylidene fluoride (PVDF) hollow-fiber hemodialyzer.

    Science.gov (United States)

    Zhang, Qinglei; Lu, Xiaolong; Zhao, Lihua; Liu, Juanjuan; Wu, Chunfeng

    2016-06-01

    In this study, polyvinylidene fluoride (PVDF) hollow-fiber hemodialysis membranes were prepared by non-solvent-induced phase separation. The PVDF hollow-fiber hemodialyzers were prepared by centrifugal casting. The results showed that the PVDF membrane had better mechanical and separation properties when the membrane wall thickness was 40 μm and the N,N-dimethylacetamide in the core was 70 Vol%. Compared with commercial polysulfone hemodialysis membrane (Fresenius F60S membrane), the PVDF membrane had better mechanical property and ultrafiltration (UF) flux of pure water. The PVDF dialyzer's removal efficiency for middle molecules was proven to be much higher than that of the F60S dialyzer. The UF coefficient of a high-flux PVDF dialyzer is 62.6 ml/h/mm Hg, whereas F60S is 42.5 ml/h/mm Hg, which can promote clearance for middle molecules.

  12. Simulation of polyvinylidene fluoride detector response to hypervelocity particle impact

    Energy Technology Data Exchange (ETDEWEB)

    Poppe, Andrew, E-mail: poppe@lasp.colorado.ed [Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, CO 80303 (United States); Department of Physics, University of Colorado, 2000 Colorado Ave, Boulder, CO 80309 (United States); Colorado Center for Lunar Dust and Atmospheric Studies, University of Colorado at Boulder, Boulder, CO 80303 (United States); Jacobsmeyer, Brian [Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, CO 80303 (United States); Department of Physics, University of Colorado, 2000 Colorado Ave, Boulder, CO 80309 (United States); James, David [Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, CO 80303 (United States); Horanyi, Mihaly [Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, CO 80303 (United States); Department of Physics, University of Colorado, 2000 Colorado Ave, Boulder, CO 80309 (United States); Colorado Center for Lunar Dust and Atmospheric Studies, University of Colorado at Boulder, Boulder, CO 80303 (United States)

    2010-10-21

    Polyvinylidene fluoride (PVDF) films have been utilized as interplanetary dust detectors for many years in a variety of space environments. PVDF serves as a dust detector by producing a 'depolarization' charge upon hypervelocity impact. Previous instruments have relied on empirical calibrations to establish the relationship between the mass and velocity of the impacting dust particle and the generated charge. Here, we present a new theoretical derivation of PVDF response to non-penetrating hypervelocity particle impacts. We compare our simulation results to experimental calibration data from the Cosmic Dust Experiment on the Aeronomy of Ice in the Mesosphere satellite and the Student Dust Counter on the New Horizons mission. The simulation results agree well with the experimental data, yet suggest a modified crater diameter scaling law for non-penetrating hypervelocity impacts into PVDF.

  13. Fluoride-conversion synthesis of homogeneous actinide oxide solid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Silva, G W Chinthaka M [ORNL; Hunn, John D [ORNL; Yeamans, Charles B. [University of California, Berkeley; Cerefice, Gary S. [University of Nevada, Las Vegas; Czerwinski, Ken R. [University of Nevada, Las Vegas

    2011-01-01

    Here, a novel route to synthesize (U, Th)O2 solid solutions at a relatively low temperature of 1100 C is demonstrated. First, the separate actinide oxides reacted with ammonium bifluoride to form ammonium actinide fluorides at room temperature. Subsequently, this mixture was converted to the actinide oxide solid solution using a two-phased heat treatment, first at 610 C in static air, then at 1100 C in flowing argon. Solid solutions obeying Vegard s Law were synthesized for ThO2 content from 10 to 90 wt%. Microscopy showed that the (U, Th)O2 solid solutions synthesized with this method to have considerably high crystallinity and homogeneity, suggesting the suitability of material thus synthesized for sintering into nuclear fuel pellets at low temperatures.

  14. Removal of fluoride impurities from UF.sub.6 gas

    Science.gov (United States)

    Beitz, James V.

    1985-01-01

    A method of purifying a UF.sub.6 gas stream containing one or more metal fluoride impurities composed of a transuranic metal, transition metal or mixtures thereof, is carried out by contacting the gas stream with a bed of UF.sub.5 in a reaction vessel under conditions where at least one impurity reacts with the UF.sub.5 to form a nongaseous product and a treated gas stream, and removing the treated gas stream from contact with the bed. The nongaseous products are subsequently removed in a reaction with an active fluorine affording agent to form a gaseous impurity which is removed from the reaction vessel. The bed of UF.sub.5 is formed by the reduction of UF.sub.6 in the presence of UV light. One embodiment of the reaction vessel includes a plurality of UV light sources as tubes on which UF.sub.5 is formed.

  15. Polymorphism Behaviors of Electrospun Poly(vinylidene fluoride) Nanofibers

    Science.gov (United States)

    Zhong, Zhenxin; Reneker, Darrell

    2009-03-01

    Poly(vinylidene fluoride) (PVDF) and its copolymers have drawn great attention in recent years due to their attractive electrical properties such as ferro-, piezo- and pyro-electricity. Depending on its processing, PVDF can exhibit five different polymorphs. Among them, the beta phase has the highest piezo-, pyro- and ferroelectric activities. Electrospinning was used to produce thin polymer fibers. The polymorphic behavior of electrospun PVDF fibers was observed. Long cylindrical PVDF specimens with cross-sections in the range of 10 nm to 1 micron was obtained by varying the electrospinning conditions. Almost pure beta phase was obtained in electrospun PVDF nanofibers. The morphology and internal structure of single PVDF electrospun nanofibers were studied by transmission electron microscopy.

  16. Ratiometric fluorescence signalling of fluoride ions by an amidophthalimide derivative

    Indian Academy of Sciences (India)

    Moloy Sarkar; Raghavendra Yellampalli; Bhaswati Bhattacharya; Ravi Kumar Kanaparthi; Anunay Samanta

    2007-03-01

    Fluorescence behaviour of 4-benzoylamido-N-methylphthalimide (1), designed and developed for selective detection of fluoride ions, is reported. 1 displays F--induced colour change that allows its detection with the naked eye. The F- specificity of the sensor system is evident from the fact that unlike F-, other halides do not affect the absorption characteristics of 1. Apart from the colorimetric response, the fluorescence output of 1 is also modulated by F- in a manner that permits ratiometric fluorescence signalling of F- as well. It is found that the system can detect F- in the concentration range of 10- 60 M. The results of the experiments and theoretical calculations unambiguously suggest that the changes of the electronic absorption and fluorescence behaviour of 1, which have been exploited for signalling purpose, are due to F--induced deprotonation of the 4-amido moiety of the sensor system.

  17. Pyrochemical recovery of plutonium from calcium fluoride reduction slag

    Science.gov (United States)

    Christensen, D.C.

    A pyrochemical method of recovering finely dispersed plutonium metal from calcium fluoride reduction slag is claimed. The plutonium-bearing slag is crushed and melted in the presence of at least an equimolar amount of calcium chloride and a few percent metallic calcium. The calcium chloride reduces the melting point and thereby decreases the viscosity of the molten mixture. The calcium reduces any oxidized plutonium in the mixture and also causes the dispersed plutonium metal to coalesce and settle out as a separate metallic phase at the bottom of the reaction vessel. Upon cooling the mixture to room temperature, the solid plutonium can be cleanly separated from the overlying solid slag, with an average recovery yield on the order of 96 percent.

  18. Dental fluorosis in children in areas with fluoride-polluted air, high-fluoride water, and low-fluoride water as well as low-fluoride air: A study of deciduous and permanent teeth in the Shaanxi province, China

    Energy Technology Data Exchange (ETDEWEB)

    Ruan, J.P.; Bardsen, A.; Astrom, A.N.; Huang, R.Z.; Wang, Z.L.; Bjorvatn, K. [University of Bergen, Bergen (Norway). Dept. of Oral Science

    2007-07-01

    The aim of the study was to assess dental fluorosis (DF) in the deciduous and permanent teeth of children in areas with high-F coal (area A) and high-F water (area C) compared to children from area B, with low-F water and coal. DF was found to be prevalent in both dentitions in areas A and C. Similarity in percentages of DF may indicate that indoor air with about to 60 {mu}g F/m{sup 3} and drinking water with 3.6 mg F/L are similarly toxic to developing permanent teeth. The percentage of deciduous teeth with DF was significantly lower in area A compared to area C. Where low-F coal and low-F water were used (area B), similar to 20% of permanent teeth had DF, indicating a relatively low tolerance to fluoride in Chinese children brought up under the present living conditions.

  19. The pH effect of solvent in silanization on fluoride released and mechanical properties of heat-cured acrylic resin containing fluoride-releasing filler.

    Science.gov (United States)

    Nakornchai, Natha; Arksornnukit, Mansuang; Kamonkhantikul, Krid; Takahashi, Hidekazu

    2016-01-01

    This study aimed to evaluate the effect of an acidic-adjusted pH of solvent in silanization on the amount of fluoride released and mechanical properties of heat-cured acrylic resin containing a silanized fluoride-releasing filler. The experimental groups were divided into 4 groups; non-silanized, acidic-adjusted pH, non-adjusted pH, and no filler as control. For fluoride measurement, each specimen was placed in deionized water which was changed every day for 7 days, every week for 7 weeks and measured. The flexural strength and flexural modulus were evaluated after aging for 48 h, 1, and 2 months. Two-way ANOVA indicated significant differences among groups, storage times, and its interaction in fluoride measurement and flexural modulus. For flexural strength, there was significant difference only among groups. Acidic-adjusted pH of solvent in silanization enhanced the amount of fluoride released from acrylic resin, while non-adjusted pH of solvent exhibited better flexural strength of acrylic resin.

  20. Synthesis of uranium fluorides from uranium dioxide with ammonium bifluoride and ammonolysis of uranium fluorides to uranium nitrides

    Science.gov (United States)

    Yeamans, Charles Burnett

    This work presents the chemical conversion of uranium oxides to uranium fluorides, and their subsequent conversion to uranium nitrides. Uranium dioxide reacts with ammonium bifluoride at 20°C to form compound in the ammonium-uranium fluoride chemical system. This reaction occurs between solid uranium dioxide at the surface of the particles and ammonium fluoride vapor. A shrinking-sphere model demonstrated surface reaction kinetics, not mass transport by diffusion through the product layer, limit the reaction rate when the starting material consists of 100 mum uranium dioxide particles. Powder x-ray diffraction showed the reaction to be complete within 8 hours, with (NH4) 4UF8 the reaction product. High-resolution electron microcopy revealed the product is largely amorphous on a micrometer-scale, but contains well-formed crystal domains on the order of 10x10 nm. X-ray diffraction showed the reaction progresses though beta-NH4UF5, delta-(NH 4)2UF6, and gamma-(NH4)2UF6 intermediate phases before finally forming (NH4)4UF 8. Modeling the system as a series of first-order reaction suggested a fourth intermediate, possibly UF4, is likely to occur. The reaction of (NH4)4UF8 with ammonia gas at 800°C forms alpha-U2N3/UN2 solid solution products with a composition of UN1.83. The x-ray powder diffraction pattern of this product is the fcc pattern commonly referenced as that of UN2 and the lattice parameter was 0.53050 nm. Surface area increased by a factor of ten during ammonolysis, consistent with the action of a hydriding agent. The alpha-U2N 3/UN2 solid solution system formed contained 1 wt% UO 2 as an impurity. Upon subsequent heating to 1150°C for 4.5 hours under argon, the nitride sample formed UN with a UO2 impurity of 9 wt%. Based on the HRTEM images, oxidation in the UN product appears to be limited to within 20 nm of particle surfaces and grain boundaries.

  1. Thermodynamic investigation of fluoride salts for nuclear energy production

    Energy Technology Data Exchange (ETDEWEB)

    Beilmann, Markus

    2013-06-28

    In this work thermodynamic properties of molten fluoride salts and salt mixtures are investigated. Fluoride salts have advantageous properties to be used in energy producing systems based on the conversion from heat to energy like i.e in Molten Salt Reactors. For this purpose it is very important to have detailed information about the heat capacity of the pure salts and salt mixtures. To get a better understanding about the heat capacity in mixtures drop calorimetry measurements of mixtures of LiF with other alkali fluorides were conducted and compared. The investigation of fluoride salts at elevated temperatures is complicated by the fact that fluoride vapour is aggressive to many materials. In order to protect our sensitive measurement equipment the salt samples were encapsulated in nickel crucibles using a laser welding technique and afterwards the whole nickel capsule was measured. This method was verified by the measurement of unmixed CsF and KF where in both examples an excellent agreement with literature data was obtained. Afterwards various intermediate compositions of the systems LiF-KF, LiF-CsF and LiF-RbF were investigated and a general trend according to the difference in cation radii could be established. In combination with literature data for the LiF-NaF system the heat capacity of the liquid state follows the order LiF-NaF

  2. Endemic fluorosis in San Luis Potosi, Mexico. I. Identification of risk factors associated with human exposure to fluoride.

    Science.gov (United States)

    Grimaldo, M; Borja-Aburto, V H; Ramírez, A L; Ponce, M; Rosas, M; Díaz-Barriga, F

    1995-01-01

    In order to identify risk factors associated with human exposure to fluoride in San Luis Potosi (SLP), Mexico, a biochemical and epidemiological study was carried out in 1992. Results from the analysis of fluoride sources showed that 61% of tap water samples had fluoride levels above the optimal level of 0.7-1.2 ppm. The levels were higher after boiling. In bottled water, fluoride levels ranged from 0.33 to 6.97 ppm. These sources are important since in SLP 82% of the children drink tap water, 31% also drink bottled water, 92% prepare their food with tap water, 44% boiled all the drinking water, and 91% used infant formula reconstituted with boiled water. The prevalence and severity of dental fluorosis in children (11-13 years old) increased as the concentration of water fluoride increased. At levels of fluoride in water lower than 0.7 ppm a prevalence of 69% was found for total dental fluorosis, whereas at levels of fluoride in water higher than 2.0 ppm a prevalence of 98% was found. In the same children, fluoride levels in urine were quantified. The levels increased as the concentration of water fluoride increased. Regressional analysis showed an increment of 0.54 ppm (P < 0.0001) of fluoride in urine for each ppm of fluoride in water. Fluoride urinary levels were higher in samples collected during the afternoon (1800) when compared with sample collected during the morning (1100). Taking together all these results, three risk factors for human exposure to fluoride in SLP can be identified: ambient temperature, boiled water, and food preparation with boiled water. These factors explain the prevalence of dental fluorosis in SLP.

  3. Synthesis of Fluoridated Hydroxyapatite Containing Potassium and Its Effect on Dentin

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The aim of this work was to produce a nanoscale fluoridated and potassium containing hydroxyapatite via sol-gel method and to observe the effect of occlusion of the dentin tubule under scanning electron microscopy. HF was selected as fluorine-containing reagent which was added into mixed Ca ( NO3 )2-P2 O5 ethanol solutions to obtain dipping sols. All of the resulting samples showed apatite structure in their X- ray diffraction pattern. The lattice parameter a and the crystallite size were calculated to demonstrate the crystalline structure of fluoridated and potassium containing HA. Extracted paired premolars were chosen to obtain a flat surface with opened tubules. It was observed that the tubules were covered by α 10μm layer of fluoridated and potassium containing HA under the SEM. As the experimental results show the nanoscale fluoridated and potassium containing hydroxyapatite occludes the dentin tubules.

  4. Chromogenic and fluorogenic Schiff base chemosensor for nano scale level fluoride detection with logical interpretation

    Science.gov (United States)

    Ghosh, Pritam; Banerjee, Priyabrata

    2016-10-01

    Schiff base Organic Frameworks (SOFs) based chemosensor have been synthesized and utilized for recognization of biologically relevant fluoride anion. The chemosensor is selective for fluoride (F-) and exhibits reversible UV-Vis response with alternate addition of aluminum (Al3+). Interestingly a fluorescence 'turn on' response has been noticed with concomitant addition of fluoride. TICT, PTTS and restricted Cdbnd N isomerization has been taken into account in order to explain the florescence 'turn on' phenomenon. Significantly, the limit of fluoride detection is nano molar level (∼10 nM). The reversible UV-Vis phenomena have been used for designing AND-NAND-NOT-NOR-OR-XOR-XNOR based complex logic circuit to prepare potential feedstock as 'Lab-on a-Molecule'.

  5. Fluoride contents in groundwaters and the main consumed foods (dates and tea) in Southern Algeria region

    Science.gov (United States)

    Messaïtfa, Amar

    2008-07-01

    In the Algeria South, the dental fluorosis is a “silent” epidemic spreading within the populations. The present study was aimed to determine the fluoride content in water, dates and tea that are widely consumed. The results reveal that 35% of water wells had excessive fluoride levels (>1.5 mg/L). The eastern areas where dental decay is the most widespread pathology present the highest contents. Dates, tea and water are considerable sources of fluoride, with a daily contribution of 10, 20 and up to 70%, respectively. For these three sources, the daily intake of fluoride ingested by an adult exceeds the proposed safe threshold of 0.05-0.07 mg/kg day.

  6. 76 FR 10899 - Proposed HHS Recommendation for Fluoride Concentration in Drinking Water for Prevention of Dental...

    Science.gov (United States)

    2011-02-28

    ... while limiting the risk of dental fluorosis. The proposed recommendation was published in the Federal... dental fluorosis, fluid intake among children, and the contribution of fluoride in drinking water...

  7. Fluoride release from three glass ionomer materials and the effects of varnishing with or without finishing.

    Science.gov (United States)

    McKnight-Hanes, C; Whitford, G M

    1992-01-01

    The release rates of fluoride from discs made from three glass ionomer products, Miracle Mix (MM), Ketac-Silver (KS) and Ketac-Bond (KB), into artificial saliva for 3 weeks were determined. The discs were either not varnished, varnished or varnished and finished. The release rates were not proportional to the fluoride concentrations of the products and were ordered: MM > KB > KS. The rates declined sharply as a function of time regardless of the product or treatment. Varnishing the discs caused a reduction of 61-76% depending on the product. Finishing the varnished discs produced a significant increase in the fluoride release from MM but had no effect on the release from KS or KB. In a separate study with MM, it was determined that the release rate of fluoride was inversely proportional to the powder: liquid ratio used to prepare the discs.

  8. Effect of fluoride exposure on the intelligence of school children in Madhya Pradesh, India

    Directory of Open Access Journals (Sweden)

    Sudhanshu Saxena

    2012-01-01

    Full Text Available Objective: To assess the relationship between exposure to different drinking water fluoride levels and children′s intelligence in Madhya Pradesh state, India. Materials and Methods: This cross-sectional study was conducted among 12-year-old school children of Madhya Pradesh state, India. The children were selected from low (0.05. However, a statistically significant difference was observed in the urinary fluoride levels (P 0.000. Reduction in intelligence was observed with an increased water fluoride level (P 0.000. The urinary fluoride level was a significant predictor for intelligence (P 0.000. Conclusion: Children in endemic areas of fluorosis are at risk for impaired development of intelligence.

  9. Effect of fluoride in phosphate buffer solution on bonding to artificially carious enamel.

    Science.gov (United States)

    Wang, Hao; Shimada, Yasushi; Tagami, Junji

    2007-09-01

    The purpose of the present study was to evaluate the effect of fluoride on resin bonding to artificially carious enamel. Specimens from demineralized human enamel sections were prepared using two commercially available adhesives (Clearfil SE Bond, Kuraray; Single Bond, 3M) and a composite resin (Clearfil AP-X, Kuraray) according to manufacturers' instructions. They were then immersed in phosphate buffered saline solution with varied fluoride concentrations at 0, 0.1, 0.5, 1, and 10 ppm. After immersion in each solution for one, three, or seven days, microshear bond strength was measured. The bond strengths of both adhesive systems to artificially carious enamel significantly increased after immersion in fluoride-phosphate buffer solution. Based on the findings obtained, we thus proposed not to remove the white enamel lesions for bonding in the clinic. They might be preserved and treated using fluoride applications.

  10. Malocclusion status among 15 years old adolescents in relation to fluoride concentration and area of residence

    Directory of Open Access Journals (Sweden)

    Byalakere Rudraiah Chandra Shekar

    2013-01-01

    Conclusion: The prevalence and severity of malocclusion was more in urban than rural areas, more among females than males, and it decreased with increasing concentration of fluoride in drinking water.

  11. A basic study on fluoride-based molten salt electrolysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Il Soon [Seoul National University, Seoul (Korea); Kim, Kwang Bum [Yonsei University, Seoul (Korea); Park, Byung Gi [Seoul National University, Seoul (Korea)

    2001-04-01

    The objective of this project is to study on the physicochemical properties of fluoride molten salt, to develop numerical model for simulation of molten salt electrolysis, and to establish experimental technique of fluoride molten salt. Physicochemical data of fluoride molten salt are investigated and summarized. The numerical model, designated as REFIN is developed with diffusion-layer theory and electrochemical reaction kinetics. REFIN is benchmarked with published experimental data. REFIN has a capability to simulate multicomponent electrochemical system at transient conditions. Experimental device is developed to measure electrochemical properties of structural material for fluoride molten salt. Ni electrode is measured with cyclic voltammogram in the conditions of 600 .deg. C LiF-BeF{sub 2} and 700 .deg. C LiF-BeF{sub 2}. 74 refs., 23 figs., 57 tabs. (Author)

  12. Giantically blue-shifted visible light in femtosecond mid-IR filament in fluorides

    CERN Document Server

    Dormidonov, A E; Chekalin, S V; Kandidov, V P

    2015-01-01

    A giant blue shift of an isolated visible band of supercontinuum was discovered and studied in the single filament regime of Mid-IR femtosecond laser pulse at powers slightly exceeding critical power for self-focusing in fluorides.

  13. Removal of fluoride ions from water by adsorption onto carbonaceous materials produced from coffee grounds.

    Science.gov (United States)

    Ogata, Fumihiko; Tominaga, Hisato; Yabutani, Hitoshi; Kawasaki, Naohito

    2011-01-01

    Carbonaceous material for the removal of fluoride ions from water was prepared from coffee grounds (CGs) by calcination and subsequent HCl treatment. The characteristics of the CGs, including the surface area, mean pore diameter, pore volume, and surface functional groups were determined, and the morphological characteristics were evaluated using scanning electron microscopy. The adsorption isotherms, saturated amount of fluoride ions adsorbed, and the effect of contact time and temperature on the adsorption of fluoride ions were investigated for a sample of tap water. The specific surface area of CG calcined at 600° (CG600) was larger than that of CGs calcined at 400, 800, and 1000°. Phenolic, lactonic, and carboxyl groups were detected on the CG600 surface. The adsorption capacity of the carbonized CGs for fluoride was ranked in the order CG400 water.

  14. [Caries preventive effectiveness of Fluor Protector and fluoride lacquer, Duraphat under very cariogenic conditions].

    Science.gov (United States)

    De Bruyn, H; Buskes, H

    1988-06-01

    Fluoride varnishes Durpahat and Fluor Protector are commonly used and have proven to be effective as caries preventive agents. In the first part of this paper the features of fluoride varnishes in terms of fluoride uptake, caries prevention and toxicological safety are discussed. The effect of both varnishes under high cariogenic conditions is discussed in the second part. In the presented study, 8 patients carried 3 enamel specimens (Fluor Protector, Duraphat, Control) intra-orally during 4 months. They kept plaque accumulation intact on the specimen and avoided fluoride administration from other sources. After 4 months of substantial cariogenic challenge, the enamel was analysed by microradiography and the degree of caries protection obtained for each varnish type was calculated. The results show that under high-risk caries conditions enamel treated with Fluor Protector was significantly better protected (65%) than enamel treated with Duraphat (3%).

  15. A calcite permeable reactive barrier for the remediation of Fluoride from spent potliner (SPL) contaminated groundwater

    DEFF Research Database (Denmark)

    Turner, B.D.; Binning, Philip John; Sloan, S.W.

    2008-01-01

    The use of calcite (CaCO3) as a substrate for a permeable reactive barrier (PRB) for removing fluoride from contaminated groundwater is proposed and is illustrated by application to groundwater contaminated by spent potliner leachate (SPL), a waste derived from the aluminium smelting process....... The paper focuses on two issues in the implementation of calcite permeable reactive barriers for remediating fluoride contaminated water: the impact of the groundwater chemical matrix and CO2 addition on fluoride removal. Column tests comparing pure NaF solutions, synthetic SPL solutions, and actual SPL...... results show that approximately 99% of 2300 mg/L fluoride can be removed when CO2 is injected directly into the barrier. This can be compared to approximately 30-50% removal when the influent solution is equilibrated with atmospheric CO2 before contact with calcite....

  16. Structural stability, acidity, and halide selectivity of the fluoride riboswitch recognition site

    KAUST Repository

    Chawla, Mohit

    2015-01-14

    Using static and dynamics DFT methods we show that the Mg2+/F-/phosphate/water cluster at the center of the fluoride riboswitch is stable by its own and, once assembled, does not rely on any additional factor from the overall RNA fold. Further, we predict that the pKa of the water molecule bridging two Mg cations is around 8.4. We also demonstrate that the halide selectivity of the fluoride riboswitch is determined by the stronger Mg-F bond, which is capable of keeping together the cluster. Replacing F- with Cl- results in a cluster that is unstable under dynamic conditions. Similar conclusions on the structure and energetics of the cluster in the binding pocket of fluoride-inhibited pyrophosphatase suggest that the peculiarity of fluoride is in its ability to establish much stronger metal-halide bonds.

  17. Toxicity of fluoride to aquatic species and evaluation of toxicity modifying factors.

    Science.gov (United States)

    Pearcy, Krysta; Elphick, James; Burnett-Seidel, Charlene

    2015-07-01

    The present study was performed to investigate the toxicity of fluoride to a variety of freshwater aquatic organisms and to establish whether water quality variables contribute substantively to modifying its toxicity. Water hardness, chloride, and alkalinity were tested as possible toxicity modifying factors for fluoride using acute toxicity tests with Hyalella azteca and Oncorhynchus mykiss. Chloride appeared to be the major toxicity modifying factor for fluoride in these acute toxicity tests. The chronic toxicity of fluoride was evaluated with a variety of species, including 3 fish (Pimephales promelas, O. mykiss, and Salvelinus namaycush), 3 invertebrates (Ceriodaphnia dubia, H. azteca, and Chironomus dilutus), 1 plant (Lemna minor), and 1 alga (Pseudokirchneriella subcapitata). Hyalella azteca was the most sensitive species overall, and O. mykiss was the most sensitive species of fish. The role of chloride as a toxicity modifying factor was inconsistent between species in the chronic toxicity tests.

  18. Addition of Allyltrimethylsilane to tert-Butanesulfinyl Imines Triggered by Tetra-n-butylammonium Fluoride

    Institute of Scientific and Technical Information of China (English)

    Wan Xuan ZHANG; Xue Long HOU

    2006-01-01

    The addition of allyltrimethylsilane to tert-butanesulfinyl imines triggered by tetra-n-butylammonium fluoride (TBAF) in the presence of 4A molecular sieves has been studied, and homoallylsulfinamides were obtained in good yields with moderate to high diastereoselectivitics.

  19. Characterization Report on Sand, Slag, and Crucible Residues and on Fluoride Residues

    Energy Technology Data Exchange (ETDEWEB)

    Murray, A.M.

    1999-02-10

    This paper reports on the chemical characterization of the sand, slag, and crucible (SS and C) residues and the fluoride residues that may be shipped from the Rocky Flats Environmental Technology Site (RFETS) to Savannah River Site (SRS).

  20. The effect of pretreatment with fluoride on the tensile strength of orthodontic bonding

    Energy Technology Data Exchange (ETDEWEB)

    Wang, W.N.; Sheen, D.H. (National Defense Medical Center, Taipei, Taiwan (China))

    White spot decalcifications and caries occurring adjacent to bonded orthodontic brackets have long been a concern to orthodontists. One procedure suggested to overcome this problem is fluoride treatment prior to bonding. The purpose of this study was to compare the tensile bond strength of orthodontic self-cured resin from Concise on teeth rinsed 4 minutes in 1.23% APF with untreated controls. Measurements were made on an Instron machine. Debonding interfaces were observed with a scanning electron microscope and energy dispersive x-ray spectrometry. Distributions were calculated. The tensile bond strengths of the fluoride-treated teeth and the untreated teeth were not significantly different. The debonding interfaces between resin and bracket base, within the resin itself, and between enamel and resin were similar in the two experimental groups. However, greater enamel detachment was seen within the fluoride pretreatment group. So while fluoride pretreatment does not significantly affect tensile bond strength, it may cause enamel detachment after debonding.

  1. Effects of high fluoride intake on child mental work capacity: preliminary investigation into the mechanisms involved

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y.; Li, X.J.; Wei, S.Q. [Child & Adolescent Hygiene Teaching Research Station, Chengdu (China)

    2008-10-15

    A study was carried out on 157 children, age 12-13, from a coal-burning fluorosis endemic area together with an experiment looking into the effect of high fluoride intake in animals. The results showed that early, prolonged high fluoride intake causes a decrease in a child's mental work capacity and that prolonged high uptake of fluoride causes a child's levels of hair zinc to drop. A multifactoral correlative analysis demonstrated a direct correlation between hair zinc and mental work capacity. The decrease of 5-hydroxyindoleacetic acid and the increase of norepinephrine in animal brains exposed to high levels of fluoride suggest a possible mechanism for mental work capacity deficits in children. However, further research is necessary.

  2. Effects of fluoride and aluminum from ionomeric materials on S. mutans biofilm.

    Science.gov (United States)

    Hayacibara, M F; Rosa, O P S; Koo, H; Torres, S A; Costa, B; Cury, J A

    2003-04-01

    Ionomeric materials release different proportions of fluoride and aluminum. Their simultaneous effect on the acidogenicity and composition of S. mutans biofilm is unknown. Six cylindrical specimens of each material (Ketac-fil, Vitremer, Fuji-Ortho LC, F-2000, and Z-100) were incubated with S. mutans GS-5 in culture media containing 5% sucrose (w/v). The media were changed daily for seven days, during which the pH and concentrations of fluoride and aluminum were determined. Furthermore, the concentrations of these ions and insoluble polysaccharide were determined in the biofilm formed at the end of the experimental period. The results showed that all the materials tested released fluoride. However, Vitremer released the highest amount of aluminum and was the most effective in reducing the acidogenicity of S. mutans biofilms. It also significantly affected both biofilm formation and composition. Thus, this study suggests that aluminum released by ionomeric materials may enhance the biological effects of fluoride.

  3. Groundwater fluoride enrichment in an active rift setting: Central Kenya Rift case study

    Energy Technology Data Exchange (ETDEWEB)

    Olaka, Lydia A., E-mail: lydiaolaka@gmail.com [Department of Geology, University of Nairobi, P.O Box 30197, Nairobi (Kenya); Wilke, Franziska D.H. [Geoforschungs Zentrum, Telegrafenberg, 14473 Potsdam (Germany); Olago, Daniel O.; Odada, Eric O. [Department of Geology, University of Nairobi, P.O Box 30197, Nairobi (Kenya); Mulch, Andreas [Senckenberg Biodiversity and Climate Research Centre, Senckenberganlage 25, 60325 Frankfurt (Germany); Institut für Geowissenschaften, Goethe Universität Frankfurt, Altenhöferallee 1, 60438 Frankfurt (Germany); Musolff, Andreas [UFZ-Helmholtz-Centre for Environmental Research, Department of Hydrogeology, Permoserstr. 15, 04318 Leipzig (Germany)

    2016-03-01

    Groundwater is used extensively in the Central Kenya Rift for domestic and agricultural demands. In these active rift settings groundwater can exhibit high fluoride levels. In order to address water security and reduce human exposure to high fluoride in drinking water, knowledge of the source and geochemical processes of enrichment are required. A study was therefore carried out within the Naivasha catchment (Kenya) to understand the genesis, enrichment and seasonal variations of fluoride in the groundwater. Rocks, rain, surface and groundwater sources were sampled for hydrogeochemical and isotopic investigations, the data was statistically and geospatially analyzed. Water sources have variable fluoride concentrations between 0.02–75 mg/L. 73% exceed the health limit (1.5 mg/L) in both dry and wet seasons. F{sup −} concentrations in rivers are lower (0.2–9.2 mg/L) than groundwater (0.09 to 43.6 mg/L) while saline lake waters have the highest concentrations (0.27–75 mg/L). The higher values are confined to elevations below 2000 masl. Oxygen (δ{sup 18}O) and hydrogen (δD) isotopic values range from − 6.2 to + 5.8‰ and − 31.3 to + 33.3‰, respectively, they are also highly variable in the rift floor where they attain maximum values. Fluoride base levels in the precursor vitreous volcanic rocks are higher (between 3750–6000 ppm) in minerals such as cordierite and muscovite while secondary minerals like illite and kaolinite have lower remnant fluoride (< 1000 ppm). Thus, geochemical F{sup −} enrichment in regional groundwater is mainly due to a) rock alteration, i.e. through long residence times and natural discharge and/or enhanced leakages of deep seated geothermal water reservoirs, b) secondary concentration fortification of natural reservoirs through evaporation, through reduced recharge and/or enhanced abstraction and c) through additional enrichment of fluoride after volcanic emissions. The findings are useful to help improve water management

  4. Characterization and adsorption properties of a lanthanum-loaded magnetic cationic hydrogel composite for fluoride removal.

    Science.gov (United States)

    Dong, Shuoxun; Wang, Yili

    2016-01-01

    In this study, a novel lanthanum-loaded magnetic cationic hydrogel (MCH-La) was synthesized for fluoride adsorption from drinking water. The adsorption kinetics, isotherms, and effects of pH and co-existing anions on fluoride uptake by MCH-La were evaluated. FTIR, Raman and XPS were used to analyze the fluoride adsorption mechanism of MCH-La. Results showed that MCH-La had positive zeta potential values of 23.6-8.0 mV at pH 3.0-11.0, with the magnitude of saturation magnetization up to 10.3 emu/g. The fluoride adsorption kinetics by MCH-La fitted well with the fractal-like-pseudo-second-order model, and the adsorption capacity reached 93% of the ultimate adsorption capacity within the first 10 min. The maximum fluoride adsorption capacity for MCH-La was 136.78 mg F(-)/g at an equilibrium fluoride concentration of 29.3 mg/L and pH 7.0. Equilibrium adsorption data showed that the Sips model was more suitable than the Langmuir and Freundlich models. MCH-La still had more than 100 mg of F(-)/g adsorption capacity at a strongly alkaline solution (pH > 10). The adsorption process was highly pH-dependent, and the optimal adsorption was attained at pH 2.8-4.0, corresponding to ligand exchange, electrostatic interactions, and Lewis acid-base interactions. With the exception of both anions of HCO3(-) and SiO4(4-), Cl(-), NO3(-), and SO4(2-) did not evidently prevent fluoride removal by MCH-La at their real concentrations in natural groundwater. The fluoride adsorption capacity of the regenerated MCH-La approached 70% of the fresh MCH-La from the second to fifth recycles. FTIR and Raman spectra revealed that C-O and CO functional groups on MCH contributed to the fluoride adsorption, this finding was also confirmed by the XPS F 1s spectra. Deconvolution of C 1s spectra before and after fluoride adsorption indicated that the carboxyl, anhydride, and phenol groups of MCH were involved in the fluoride removal.

  5. Effect of fluoridated casein phospopeptide-amorphous-calcium phosphate complex, chlorhexidine fluoride mouthwash on shear bond strength of orthodontic brackets: A comparative in vitro study

    Directory of Open Access Journals (Sweden)

    C A Abdul Shahariyar

    2016-01-01

    Full Text Available Objective: The aim of the current study was to determine the effects of casein phosphopeptide amorphous calcium-phosphate (CPP-ACP complex, chlorhexidine fluoride mouthwash on shear bond strengths (SBSs of orthodontic brackets. Materials and Methods: About sixty extracted healthy human premolar teeth with intact buccal enamel were divided into two equal groups to which brackets were bonded using self-etching primers (SEPs and conventional means respectively. These were further equally divided into three subgroups - (1 control (2 CPP-ACP (3 chlorhexidine fluoride mouthwash. The SBSs were then measured using a universal testing machine. Results: SBS of the conventional group was significantly higher than the self-etching group. The intragroup differences were statistically insignificant. Conclusion: CPP-ACP, chlorhexidine fluoride mouthwash did not adversely affect SBS of orthodontic brackets irrespective of the method of conditioning. Brackets bonded with conventional technique showed greater bond strengths as compared to those bonded with SEP.

  6. UCSF Protocol for Caries Arrest Using Silver Diamine Fluoride: Rationale, Indications, and Consent

    Science.gov (United States)

    Horst, Jeremy A; Ellenikiotis, Hellene; Milgrom, Peter M

    2016-01-01

    The Food and Drug Administration recently cleared silver diamine fluoride for reducing tooth sensitivity. Clinical trials document arrest and prevention of dental caries by silver diamine fluoride; this off-label use is now permissible and appropriate under U.S. law. A CDT code was approved for caries arresting medicaments for 2016 to facilitate documentation and billing. We present a systematic review, clinical indications, clinical protocol, and consent procedure to guide application for caries arrest treatment. PMID:26897901

  7. Effect of different fluoride varnishes on mineralization of artificial enamel carious lesions

    OpenAIRE

    Mohd Said, Siti Norhazlin Binti

    2015-01-01

    The chalky white appearance on enamel is known as White Spot Lesion (WSL). This initial caries lesion involves the dynamic process of demineralization and remineralization. Fluoride varnish has been shown to prevent WSL in post-eruptive tooth. The literature review summarized the available evidence on the various agents added to topical fluoride varnish, such as casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), xylito-coated calcium and phosphate, amorphous calcium phosphate (A...

  8. Selective Colorimetric Fluoride Sensor: A Heteroditopic Re-ceptor Combining Pyrrolic Amide with Urea

    Institute of Scientific and Technical Information of China (English)

    YIN Zhenming; LIU Shangyuan

    2009-01-01

    A heteroditopic anion receptor, beating one pyrrolic amide site and a urea site, has been synthesized. UV-Vis spectrum studies in CH3CN solution revealed that the receptor had higher anion binding ability than the homoditopic one. A naked-eye detectable color change, from colorless to yellow, of the receptor solution took place when fluoride was added, which indicates that the receptor has potential application to selective colorimetric fluo-ride sensing.

  9. Self-Reported Knowledge and Attitude of Dentists towards Prescription of Fluoride

    OpenAIRE

    Afsaneh Pakdaman; Zahra Yarahmadi; Mohammad Javad Kharazifard

    2015-01-01

    Objectives: This study aimed to assess the self-reported knowledge and attitude of dentists towards fluoride prescription.Materials and Methods: A questionnaire survey was conducted at the national annual dental congress in 2010 in Tehran-Iran. Dentists’ level of knowledge about the preventive effects of systemic and topical administration of fluoride was assessed as well as their attitudes towards its application. Self-reported practice for two paper patients (a child and an adult with high ...

  10. Active biomonitoring of airborne fluoride near an HF producing factory using standardised grass cultures

    Science.gov (United States)

    Franzaring, J.; Klumpp, A.; Fangmeier, A.

    In order to study the pollution gradient in the vicinity of an HF producing factory, a biomonitoring programme was performed employing VDI standardised grass cultures. Specimen plants of Lolium multiflorum cv. Lema were exposed at 11 sites over five monthly periods and the biomass produced was used for subsequent F-analyses. Meteorological data from the study region confirmed that wind direction accounted for changes in the pollution pattern over periods of time. Fluoride concentrations in the grass cultures, however, were unrelated to temperature and precipitation sums during the exposures. The biomass production of the grass cultures proved to be unrelated to these parameters as well but, with the enhanced growth of the plants, the fluoride concentrations were lower due to the dilution of the element with higher biomass accumulation. Because the contribution of particulate fluoride was unknown, both the washed grass cultures and the washing water were analysed in order to determine the amount of external fluoride. Washing reduced the fluoride concentrations by 22% on average, indicating that most of the element was internal fluoride stemming from stomatal uptake. Larger amounts of fluoride, however, could be washed off from grass cultures exposed at sites close to the factory indicating that dust emissions played a greater role at these locations. Because particulate emissions were supposed to arise from CaF 2 and the waste-product anhydrite, grass cultures were also analysed for calcium and sulphur. While calcium concentrations were generally high but unrelated to fluoride, sulphur concentrations showed a slight relationship to the F-concentrations determined in the unwashed plants. Latter findings indicate the co-deposition of the two elements as surface bound, external loads, but bioindication could not clarify to what extent both elements were partitioned in the gas-to-particle phase. We therefore recommend using the grass culture method in air quality

  11. Randomized Equivalence Trial of Intensive and Semiannual Applications of Fluoride Varnish in the Primary Dentition

    OpenAIRE

    Weinstein, P; Spiekerman, C.; Milgrom, P

    2009-01-01

    For children in the primary dentition with high caries prevalence the standard semiannual application of fluoride varnish may not be successful in preventing tooth decay. Oftentimes this population is mobile and does not receive consistent preventive care. This trial tested whether an intensive fluoride 5% sodium varnish regimen (three applications/2 weeks) applied annually has an equivalent effect on caries progression in the primary dentition compared to single applications applied semiannu...

  12. Caries remineralisation and arresting effect in children by professionally applied fluoride treatment – a systematic review

    OpenAIRE

    Gao, Sherry Shiqian; Zhang, Shinan; Mei, May Lei; Lo, Edward Chin-Man; Chu, Chun-Hung

    2016-01-01

    Background As a low-cost and easily operated treatment, the use of professionally applied topical fluoride was approved for preventing dental caries and remineralising early enamel caries or white spot lesions. It is also used to arrest dentine caries. The aim of this study is to investigate the clinical efficacy of professional fluoride therapy in remineralising and arresting caries in children. Method A systematic search of publications from 1948 to 2014 was conducted using four databases: ...

  13. EFFECT OF FLUORIDE ON KIDNEY OF ALBINO RABBIT-AN EXPERIMENTAL STUDY

    Directory of Open Access Journals (Sweden)

    Santosh K.

    2014-08-01

    Full Text Available BACKGROUND: Fluoride is present in environment in various forms and ingested by man from solid foods, drinks, drinking water and inhaled from the air. Out of these, fluoride is present in large quantities in dissolved state in many sources of drinking water producing toxicity in man. Fluoride, being excreted mainly through the kidneys, seems to damage it causing renal dysfunction. Kidneys are among the most sensitive body organs in their histopathological and functional responses to excessive amounts of fluoride. Trace elements are essential and beneficial to human being in minute concentrations. However, intake in large quantities produces adverse and toxic effects on our body. OBJECTIVE: The present study was designed to investigate the toxic effects (evaluated as histopathological changes of sodium fluoride on the kidney in albino rabbit. MATERIALS AND METHODS: Total 40 albino rabbits were used for this study, among them 8 rabbits were taken in the control group (Group A and16 rabbits each were taken in both group B and group C who were administered low and high dose of fluoride respectively. After 2 weeks interval, up to 16 weeks the histology of the kidney of each group of the rabbit was studied for histological analysis. RESULT: Histological changes in the kidneys of both Group B and Group C rabbits, following continuous daily exposure to sodium fluoride solutions in two different doses (0.5% solution for Group B and 3% solution for Group C for different durations of time were studied in detail and compared with those of the controls (Group A. CONCLUSION: It is concluded that Sodium Fluoride solution in high doses for prolonged period has a definite adverse effect on the renal parenchyma.

  14. Fluoride, bifluoride and trifluoromethyl complexes of iridium(I) and rhodium(I).

    Science.gov (United States)

    Truscott, Byron J; Nahra, Fady; Slawin, Alexandra M Z; Cordes, David B; Nolan, Steven P

    2015-01-01

    Herein we report robust methods for the preparation and full characterisation of a range of Ir(I) and Rh(I) fluoride and bifluoride complexes using N-heterocyclic carbenes (NHCs) as ancillary ligands. The processes that link the fluoride and the bifluoride species are investigated and reports of the first Ir-bifluoride and Ir(I)-NHC and Rh(I)-NHC trifluoromethyl complexes are revealed.

  15. Determination of Trace Iron in High Purity Sodium Fluoride by Graphite Furnace Atomic Absorption Spectrometry

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A method is described for the direct determination of iron in high purity sodium fluoride using graphite furnace atomic absorption spectrometry. Interferences caused by the matrix are investigated. It is shown that the ashing temperature can be increased to 1 400°C and matrix interferences eliminated, the sensi tivity of iron increased in 1.27 fold by the addition of nickel nitrate. The method is applied to the determina tion of iron in sodium fluoride and satisfactory results are obtained.

  16. Selective Access to Heterocyclic Sulfonamides and Sulfonyl Fluorides via a Parallel Medicinal Chemistry Enabled Method.

    Science.gov (United States)

    Tucker, Joseph W; Chenard, Lois; Young, Joseph M

    2015-11-09

    A sulfur-functionalized aminoacrolein derivative is used for the efficient and selective synthesis of heterocyclic sulfonyl chlorides, sulfonyl fluorides, and sulfonamides. The development of a 3-step parallel medicinal chemistry (PMC) protocol for the synthesis of pyrazole-4-sulfonamides effectively demonstrates the utility of this reagent. This reactivity was expanded to provide rapid access to other heterocyclic sulfonyl fluorides, including pyrimidines and pyridines, whose corresponding sulfonyl chlorides lack suitable chemical stability.

  17. Chitosan-praseodymium complex for adsorption of fluoride ions from water

    Institute of Scientific and Technical Information of China (English)

    Eny Kusrini; Nofrijon Sofyan; Nyoman Suwartha; Gefin Yesya; Cindy Rianti Priadi

    2015-01-01

    Engineering of chitosan by praseodymium has been investigated to improve the adsorption properties as well as physical characteristics of chitosan. Modification of chitosan changes the original properties of chitosan so that it can be more suitable for ad-sorption of fluoride ions. In this study, chitosan-praseodymium (Chi-Pr) was synthesized by impregnation method. The Chi-Pr com-plex was characterized by scanning electron microscopic-energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform in-frared (FTIR) and employed as an adsorbent for removal of fluorides ions from water in the batch system. The variables such as con-tact time, concentration of Pr, adsorbent dose, initial concentration of fluoride ions, and competitor anions were studied. The adsorp-tion efficiency of fluoride ions (η) with increasing Pr loading into chitosan (5 wt.%, 10 wt.%, 15 wt.%, 20 wt.% and 25 wt.%) were 35.5%, 56.1%, 72.0%, 68.5% and 62.5%, respectively. The Chi-Pr (15 wt.%) complex had the highest fluoride removal efficiency (72.0%). The experimental data fitted well to the Langmuir isotherm with maximum adsorption capacity (qmax) of 15.87 mg/g and an equilibrium constant (kL) of 0.15 mg. Kinetic study revealed that the adsorption of fluoride ions from water followed pseudo-second-order model with a maximum adsorption capacity (q2) of 8.20 mg/g and a rate constant (k2) of 0.01 g/mg·min. Ad-sorption efficiency of fluoride ions in the simulated drinking water was diminished with the changes in pH levels. The presence of Pr3+in chitosan increased chitosan's performance as an adsorbent for adsorption of fluoride ions.

  18. Preliminary Study on Chemical Components and Uranium Content of Calcium Fluoride Waste

    Institute of Scientific and Technical Information of China (English)

    LIANG; Xiao-hu; YANG; Lei; YANG; Jin-ling; SONG; Zhi-jun

    2013-01-01

    In the uranium conversion process,UF4 reduction is needed using calcium as reduction regent,so a great deal of calcium fluoride are generated,in which a no negligible amount of uranium(about 5%alleged)can be left in the calcium fluoride wastes by the entrainment effect.It is meaningful to extract and purify the uranium from these wastes,but chemical components of these waste is needed primarily.

  19. Effects of Two Fluoride Varnishes and One Fluoride/Chlorhexidine Varnish on Streptococcus mutans and Streptococcus sobrinus Biofilm Formation in Vitro

    Directory of Open Access Journals (Sweden)

    Arzu Pinar Erdem, Elif Sepet, Güven Kulekci, Sule Can Trosola, Yegane Guven

    2012-01-01

    Full Text Available Aims: The aim of this study was to evaluate and to compare the effect of two fluoride varnishes and one fluoride/chlorhexidine varnish on Streptococcus mutans and Streptococcus sobrinus biofilm formation, in vitro.Study design: Standard acrylic discs were prepared and divided into groups based on the varnish applied to the disc surface: Fluor Protector, Bifluoride 12, and Fluor Protector + Cervitec (1:1. Untreated discs served as controls. In the study groups, biofilms of S. mutans and S. sobrinus were formed over 24 h, 48 h, and 5 days. The fluoride concentrations in the monospecies biofilms and viable counts of S. mutans and S. sobrinus were investigated.Results: In all study groups, a statistically significant increase in the viable number of S. mutans and S. sobrinus cells was observed between 24 h and 5 days. In both monospecies biofilms, the greatest antibacterial efficacy was detected in the Fluor Protector and Fluor Protector + Cervitec groups at 24 h. For all groups, the amount of fluoride released was highest during the first 24 h, followed by a significant decrease over the next 4 days. A negative correlation was detected between fluoride concentration and antibacterial effect in those groups with biofilms containing both species. Despite the release of high levels of fluoride, the greatest number of viable S. mutans and S. sobrinus cells was detected in the Bifluoride 12 group.Statistics: The data were analyzed using GraphPad Prism software (ver. 3.Conclusions: The Fluor Protector + Cervitec varnish exerted prolonged antibacterial effects on S. mutans and S. sobrinus biofilms compared to the other varnishes tested.

  20. Interaction between a transition-metal fluoride and a transition-metal hydride: water-mediated hydrofluoric acid evolution following fluoride solvation.

    Science.gov (United States)

    Chierotti, Michele R; Rossin, Andrea; Gobetto, Roberto; Peruzzini, Maurizio

    2013-11-04

    The reaction between the nickel(II) PCP pincer fluoride complex ((tBu)PCP)Ni(F) [(tBu)PCP = 2,6-C6H3(CH2P(t)Bu2)2] and the tungsten(II) carbonyl hydride CpW(H)(CO)3 (Cp = η(5)-C5H5(-)) leads to hydrofluoric acid evolution and formation of the bimetallic isocarbonylic species [CpW(CO)2(μ-κ,C:κ,O-CO)···Ni((tBu)PCP)]. The process has been monitored through multinuclear ((19)F, (31)P{(1)H}, (1)H) variable-temperature NMR spectroscopy, collecting (19)F T1 data values for a fluoride ligand bound to a transition metal. The extremely short relaxation time (minimum value of 13 ms at 193 K) is ascribed to the large chemical shift anisotropy of the Ni-F bond (688 ppm). The in-depth NMR analysis has revealed that the fluoride-hydride interaction is not direct but water-mediated, at odds with what was previously observed for the "hydride-hydride" case ((tBu)PCP)Ni(H)/CpW(H)(CO)3. Kinetic measurements have unveiled that the first step of the overall mechanism is thought to be solvation of the fluoride ligand (as a result of Ni-F···H2O hydrogen bonding), while further reaction of the solvated fluoride with CpW(H)(CO)3 is extremely slow and competes with the side reaction of fluoride replacement by a water molecule on the nickel center to form the [((tBu)PCP)Ni(H2O)](+) aquo species. Finally, density functional theory analysis of the solvation process through a discrete + continuum model has been accomplished, at the M06//6-31+G(d,p) level of theory, to support the mechanistic hypothesis.

  1. Effects of enamel matrix genes on dental caries are moderated by fluoride exposures.

    Science.gov (United States)

    Shaffer, John R; Carlson, Jenna C; Stanley, Brooklyn O C; Feingold, Eleanor; Cooper, Margaret; Vanyukov, Michael M; Maher, Brion S; Slayton, Rebecca L; Willing, Marcia C; Reis, Steven E; McNeil, Daniel W; Crout, Richard J; Weyant, Robert J; Levy, Steven M; Vieira, Alexandre R; Marazita, Mary L

    2015-02-01

    Dental caries (tooth decay) is the most common chronic disease, worldwide, affecting most children and adults. Though dental caries is highly heritable, few caries-related genes have been discovered. We investigated whether 18 genetic variants in the group of non-amelogenin enamel matrix genes (AMBN, ENAM, TUFT1, and TFIP11) were associated with dental caries experience in 13 age- and race-stratified samples from six parent studies (N = 3,600). Linear regression was used to model genetic associations and test gene-by-fluoride interaction effects for two sources of fluoride: daily tooth brushing and home water fluoride concentration. Meta-analysis was used to combine results across five child and eight adult samples. We observed the statistically significant association of rs2337359 upstream of TUFT1 with dental caries experience via meta-analysis across adult samples (p caries experience only if they were not exposed to the source of fluoride. Altogether, these results confirm that variation in enamel matrix genes contributes to individual differences in dental caries liability, and demonstrate that the effects of these genes may be moderated by protective fluoride exposures. In short, genes may exert greater influence on dental caries in unprotected environments, or equivalently, the protective effects of fluoride may obviate the effects of genetic risk alleles.

  2. Distribution of fluoride in groundwater of Maku area, northwest of Iran

    Science.gov (United States)

    Asghari Moghaddam, Asghar; Fijani, Elham

    2008-11-01

    High fluoride groundwater occurs in Maku area, in the north of West Azarbaijan province, northwest of Iran. Groundwater is the main source of drinking water for the area residents. Groundwater samples were collected from 72 selected points including 40 basaltic and 32 nonbasaltic springs and wells, in two stages, during June and August 2006. The areas with high fluoride concentrations have been identified, and the possible causes for its variation have been investigated. Regional hydrogeochemical investigation indicates that water-rock interaction is probably the main reason for the high concentration of ions in groundwater. The concentration of F- in groundwater is positively correlated with that of HCO3 - and Na+, indicating that groundwater with high HCO3 - and Na+ concentrations help to dissolve some fluoride-rich minerals. All of the water samples, collected from the basaltic areas do not meet the water quality standards for fluoride concentration and some other parameters. Hence, it is not suitable for consumption without any prior treatment. Inhabitants of the area that obtain their drinking water supplies from basaltic springs and wells are suffering from dental fluorosis. The population of the study area is at a high risk due to excessive fluoride intake especially when they are unaware of the amount of fluoride being ingested due to lack of awareness.

  3. Impacts of inorganic fluorides on terrestrial ecosystems: An ecological risk assessment case study

    Energy Technology Data Exchange (ETDEWEB)

    Kent, R.A.; Schneider, U.A.; Pawlisz, A.V. [Environment Canada, Hull, Quebec (Canada). Evaluation and Interpretation Branch

    1995-12-31

    In 1994, the national environmental assessment under the Canadian Environmental Protection Act concluded that concentrations of inorganic fluorides near industrial sources in Canada may cause long-term adverse effects in sensitive terrestrial plant and wildlife species. This case study examines the accumulation of inorganic fluorides in vegetation and subsequent effects on a sensitive herbivore species, the white tail deer (Odocoileus virginianus) on Cornwall Island, Ontario, near an aluminum smelting facility, Using environmental concentration data for air, water and food (vegetation), a Monte Carlo simulation was used to estimate the probability that multimedia exposure of inorganic fluorides exceeded known effects thresholds of skeletal and dental fluorosis in deer, and in turn quantify the magnitude of that risk. With daily intakes ranging from 2--324 {micro}g/deer/day, it was estimated that exposure to fluorides exceeds the daily intake threshold for fluorosis (55 {micro}g/deer/day) in 12% of the deer population. Seasonal differences in exposure and subsequent risk were noted. These results are also supported by additional field data on domestic cattle from the Cornwall Island area where effects (e.g., excessive teeth wear, delayed eruption of permanent teeth, osteosclerosis, osteonecrosis) have been reported and linked to high levels of fluorides in air, water, and forage. It is estimated that at least 10% of the deer from the Cornwall Island area may be subject to debilitating skeletal and dental fluorosis as a result of fluoride emissions from the adjacent aluminum smelter.

  4. Air quality standards for the protection of farm animals from fluorides

    Energy Technology Data Exchange (ETDEWEB)

    Suttie, J.W.

    1969-04-01

    The ingestion of forages contaminated with inorganic fluorides from industrial sources constitutes an air pollution problem for domestic livestock. In cattle, which have been studied most extensively, the syndrome is characterized by dental and skeletal lesions, lameness, chemical evidence of increased fluoride ingestion, and in severe cases by effects on appetite and milk production. The only practical basis for a standard appears to be one based on forage fluoride concentrations. It is concluded that a standard should protect cattle from loss of milk production and from severe dental fluorosis, but need not be set so low that the animals will be protected against any discernible deviations from normal which do not influence their general health, productive ability, or the soundness and wearing quality of their dentition. As there may be wide seasonal variations in forage fluoride concentrations, the basic standard should be expressed as a yearly average of the forage fluoride concentration. However, as the developing teeth may be adversely influenced by short periods of high exposure, the standard should contain a provision which limits both the extent and duration of time that high concentrations may be tolerated even though they are balanced by lower values at other months. Based on these criteria, a tentative standard which limits forage fluoride to an average of 40 ppm, and limits the time that forage concentrations may exceed 60 to 80 ppm F is proposed.

  5. Association of Down's syndrome and water fluoride level: a systematic review of the evidence

    Directory of Open Access Journals (Sweden)

    McDonagh Marian

    2001-07-01

    Full Text Available Abstract Background A review of the safety and efficacy of drinking water fluoridation was commissioned by the UK Department of Health to investigate whether the evidence supported a beneficial effect of water fluoridation and whether there was any evidence of adverse effects. Down's syndrome was one of the adverse effects reported. The aim of this review is to examine the evidence for an association between water fluoride level and Down's syndrome. Methods A systematic review of research. Studies were identified through a comprehensive literature search, scanning citations and online requests for papers. Studies in all languages which investigated the incidence of Down's syndrome in areas with different levels of fluoride in their water supplies were included. Study inclusion and quality was assessed independently by 2 reviewers. A qualitative analysis was conducted. Results Six studies were included. All were ecological in design and scored poorly on the validity assessment. The estimates of the crude relative risk ranged from 0.84 to 3.0. Four studies showed no significant associations between the incidence of Down's syndrome and water fluoride level and two studies by the same author found a significant (p Conclusions The evidence of an association between water fluoride level and Down's syndrome incidence is inconclusive.

  6. Crystal Structures of Diaryliodonium Fluorides and their Implications for Fluorination Mechanisms.

    Science.gov (United States)

    Lee, Yong Sok; Chun, Joong-Hyun; Hodošček, Milan; Pike, Victor

    2017-01-31

    The radiofluorination of diaryliodonium salts is of value for producing radiotracers for positron emission tomography. We report crystal structures for two diaryliodonium fluorides. Whereas diphenyliodon um fluoride (1a) exists as a tetramer bridged by four fluoride ions, 2-methylphenyl(phenyl)iodonium fluoride (2a) forms a fluoride-bridged dimer that is further halogen-bonded to two other monomers. We discuss the topological relationships between the two and their implications for fluorination in solution. Both radiofluorination and NMR spectroscopy show that thermolysis of 2a gives 2-fluorotoluene and fluorobenzene in a 2 to 1 ratio that is in good agreement with the ratio observed from the radiofluorination of 2-methylphenyl(phenyl)iodonium chloride (2b). The constancy of the product ratio affirms that the fluorinations occur via the same two rapidly interconverting transition states whose energy difference dictates chemoselectivity. The quantum chemical studies with density functional theory at the level of B3LYP/DGDZVP provide deeper insight into the role of 'ortho effect' in the mechanism of fluorination. By utilizing the crystal structures of 1a and 2a, the mechanisms of fluoroarene formation from diaryliodonium fluorides in their monomeric, homodimeric, heterodimeric, and tetrameric states were also investigated. According to this analysis, we propose that oligomerization energy dictates whether the fluorination occurs through a monomeric or an oligomeric pathway.

  7. The short-term effects of diammine silver fluoride on tooth sensitivity: a randomized controlled trial.

    Science.gov (United States)

    Castillo, J L; Rivera, S; Aparicio, T; Lazo, R; Aw, T-C; Mancl, L L; Milgrom, P

    2011-02-01

    Tooth sensitivity is a common clinical problem. This multi-center randomized clinical trial assessed the effectiveness and safety of topical diammine silver fluoride. From two sites (Lima and Cusco, Peru), 126 adults with at least one tooth sensitive to compressed air were randomly assigned to either the experimental treatment or sterile water, and pain was assessed by means of a 100-mm visual analogue scale at 24 hours and 7 days. The diammine silver fluoride reduced pain at 7 days at both sites. At the Lima site, the average change in pain scores between baseline and day 7 for the silver fluoride group was -35.8 (SD = 27.7) mm vs. 0.4 (SD = 16.2) mm for the control group (P < 0.001). In Cusco, the average change in pain scores for the silver fluoride group was -23.4 (SD = 21.0) mm and -5.5 (18.1) mm for the control group (P = 0.002). No tissue ulceration, white changes, or argyria was observed. A small number of participants in the silver fluoride group experienced a mild but transient increase in erythema in the gingiva near the tooth. No changes were observed in the Gingival Index. We concluded that diammine silver fluoride is a clinically effective and safe tooth desensitizer.

  8. Effect of Fluoride-containing Mouthrinses on the Translucence of Resin Modified Glass Ionomer Cements

    Directory of Open Access Journals (Sweden)

    Garcia Patrícia Petromilli Nordi Sasso

    2002-01-01

    Full Text Available The aim of this in vitro study was to assess the effect of different fluoride-containing mouthrinses on the translucence of resin-modified glass ionomer cements, as a function of the restorative material used, the fluoride-containing solution employed and the time of immersion. Disks were prepared (10 mm x 2 mm with the modified glass ionomer cements Vitremer (3M and Fuji II LC (GC Co., and immersed in three fluoride-containing solutions: Fluordent Reach (Johnson & Johnson, Fluorgard (Colgate-Palmolive and Oral B (Gillette do Brasil Ltda. Translucence was measured with electrophoresis equipment (JOUAN after different immersion times. The results obtained were submitted to ANOVA and Tukey's test, and a statistically significant decrease was observed in the translucence of the materials after immersion in the fluoride-containing solutions. Fuji II LC demonstrated the lowest alteration in translucence, independently of the solution employed. Fluorgard was the fluoride-containing mouthrinse that promoted the highest alteration. It can be concluded that the fluoride-containing mouthrinses influenced the translucence of the resin-modified glass ionomer cements.

  9. Removal of fluoride in aqueous solution by adsorption on acid activated water treatment sludge

    Science.gov (United States)

    Vinitnantharat, Soydoa; Kositchaiyong, Sriwilai; Chiarakorn, Siriluk

    2010-06-01

    This paper reports the use of a pellet of adsorbent made from water treatment sludge (S) and acid activated water treatment sludge (SH) for removal of fluoride in the batch equilibration technique. The influence of pH, adsorbent dosage, temperature and effect of other ions were employed to find out the feasibility of acid activated adsorbent to remove fluoride to the permissible concentration of 0.7 mg/L. The results from the adsorption isotherm followed both Langmuir and Freundlich models and the highest fluoride removal was found for adsorbent activated with acetic acid at 2.0 mol/L. The optimum adsorbent dosage was found at 40 g/L, 0.01 mol/L acid activated adsorbent which was able to adsorb fluoride from 10 down to 0.11 mg/L. The adsorption capacity was decreased when the temperature increased. This revealed that the adsorption of fluoride on SH was exothermic. In the presence of nitrate and carbonate ions in the aqueous solution, fluoride removal efficiency of SH decreased from 94.4% to 86.6% and 90.8%, respectively. However, there is no significant effect in the presence of sulfate and chloride ions.

  10. Contribution to the physicochemical rationale for the caries reducing effect of fluoride.

    Science.gov (United States)

    Driessens, F C; Van Dijk, J W; Borggreven, J M; Verbeeck, R M

    1980-09-01

    The effect of fluoride on the stability of apatites containing Na+ and CO3(2)- ions is described qualitatively. Also the boundaries of the apatite stability field in the quasi-septary system CaO - P2O5 - H2O - Na2O - CO2 - NaF - MX are presented. At these boundaries brushite (or monetite), octocalciumphosphate, calcite and calcium fluoride can become stable solid phases. As a consequence, certain mechanisms for the caries reducing effect of fluoride gain probability over other proposed mechanisms. First, it is likely that endemic fluoride yields more fully mineralized enamel which in turn results in a lower initial rate of the caries process. Second, after eruption the mineral in the tooth superficial layer is bound to accumulate fluoride on the surface of its crystals. This causes a slower rate of the crystal surface dissolution at that site and, hence, a thicker and denser intact superficial layer over the lesion. Finally, the formation of a precipitate of fluorhydroxyapatite and perhaps also of calcium fluoride is promoted in the plaque during cycles of metabolic activity. Subsequent dissolution of the CaF2 and transformation of the fluorhydroxyapatite sets free Ca+ and F- ions. Both of these ions promote the remineralization of the lesion during periods of metabolic rest whereby brushite or monetite are transformed back into apatite.

  11. The occurrence and geochemistry of fluoride in some natural waters of Kenya

    Science.gov (United States)

    Gaciri, S. J.; Davies, T. C.

    1993-03-01

    In recent years the acquisition of considerable additional data on the hydrogeochemical behaviour of fluoride in natural waters of Kenya has been made possible by extensive surface-water and groundwater sampling campaigns as well as by improvements in analytical techniques. Ultimately, the principal source of fluoride relates to emissions from volcanic activity associated with the East African Rift System. Through various intermediate steps, but also directly, fluoride passes into the natural water system and components of the food chain. Ingestion by man is mainly through drinking water and other beverages. River waters in Kenya generally have a fluoride concentration lower than the recommended level (1.3 ppm) for potable water, thus promoting susceptibility to dental caries. Groundwaters and lake waters show considerably higher fluoride contents, resulting in the widespread incidence of fluorosis in areas where groundwater is the major source of drinking water, and lake fish is a regular component of the diet. This paper presents a synthesis of the data so far obtained on the sources and distribution of fluoride in the hydrological system of Kenya, examines the extent of fluorine toxicity and puts forward recommendations to combat or minimise the problem.

  12. Inequalities in public water supply fluoridation in Brazil: An ecological study

    Directory of Open Access Journals (Sweden)

    Moysés Simone T

    2008-04-01

    Full Text Available Abstract Background The literature is scarce on the social and geographic inequalities in the access to and implementation of the fluoridation of public water supplies. This study adds knowledge to the Brazilian experience of the chronic privation of water and wastewater policies, access to potable water and fluoridation in the country. Thus, the aim of this study was to verify possible inequalities in the population's access to fluoridated drinking water in 246 Brazilian municipalities. Methods The information on the process of water fluoridation in the municipalities and in the macro region in which each municipality is located was obtained from the national epidemiological survey which was concluded in 2003. The data relating to the human development index at municipal level (HDI-M and access to mains water came from the Brazilian Human Development Atlas, whilst the size of the population was obtained from a governmental source. The Fisher exact test (P Results The results clearly showed that there is a relationship between municipalities with larger populations, located in more socio-economically advantaged regions and with better HDI-M, and where fluoridation is both present and has been implemented for a longer period of time (started before 1990. Conclusion The findings suggest that the aim of treating water with fluoride may not be being adequately achieved, requiring more effective strategies so that access to this measure can be expanded equitably.

  13. Exposure to High Fluoride Drinking Water and Risk of Dental Fluorosis in Estonia

    Directory of Open Access Journals (Sweden)

    Ene Indermitte

    2009-02-01

    Full Text Available The purpose of this study was to assess exposure to drinking water fluoride and evaluate the risk of dental fluorosis among the Estonian population. The study covered all 15 counties in Estonia and 93.7% of population that has access to public water supplies. In Estonia groundwater is the main source for public water supply systems in most towns and rural settlements. The content of natural fluoride in water ranges from 0.01 to 7.20 mg/L. The exposure to different fluoride levels was assessed by linking data from previous studies on drinking water quality with databases of the Health Protection Inspectorate on water suppliers and the number of water consumers in water supply systems. Exposure assessment showed that 4% of the study population had excessive exposure to fluoride, mainly in small public water supplies in western and central Estonia, where the Silurian-Ordovician aquifer system is the only source of drinking water. There is a strong correlation between natural fluoride levels and the prevalence of dental fluorosis. Risk of dental fluorosis was calculated to different fluoride exposure levels over 1.5 mg/L.

  14. Fluoride Sorption Efficiency of Vermiculite Functionalised with Cationic Surfactant: Isotherm and Kinetics

    Directory of Open Access Journals (Sweden)

    Tayo Oladipo Ologundudu

    2016-09-01

    Full Text Available Groundwater is a major source of water, especially in rural communities. The presence of excess fluoride in groundwater has been a health concern for many decades because it causes fluorosis. The persistence of this problem led to the development of several approaches for reducing fluoride in groundwater to ≤1.5 mg/L, which is the World Health Organization’s (WHO permissible limit. Despite recorded success in fluoride reduction, drawbacks such as cost and efficiency have remained apparent, thus necessitating further research on defluoridation. This paper aims at assessing the defluoridation capacity of a clay mineral, vermiculite, when modified with the cationic surfactant hexadecyltrimethylammonium bromide. The effects of experimental parameters such as pH, agitation time, mass of adsorbent, and temperature were examined to determine the most favourable adsorption conditions. Using batch technique, the results showed a fluoride sorption of 51% from an 8 mg/L fluoride solution. The adsorption conformed more to Freundlich than Langmuir isotherm with an adsorption capacity of 2.36 mg/g, while the kinetics conformed to a pseudo-second-order reaction. pH emerged as the most influential factor in optimisation. The findings of this study indicated that modified vermiculite could be efficient in reducing fluoride in groundwater to more tolerable limits, but requires adequate pH control.

  15. Prevalence of dental caries and dental fluorosis among 12 and 15 years old school children in relation to fluoride concentration in drinking water in an endemic fluoride belt of Andhra Pradesh

    Directory of Open Access Journals (Sweden)

    Chandra Shekar

    2012-01-01

    Full Text Available Background: The published literature on the prevalence and severity of dental caries and dental fluorosis among school going children in Nalgonda district - An Endemic Fluoride belt was lacking . Objectives: To assess the prevalence and severity of dental fluorosis and dental caries among 12 and 15 years old children in relation to fluoride concentration in drinking water . Settings and Design: It was a cross-sectional study, done in Nalgonda district of Andhra Pradesh, India (endemic fluoride belt . Materials and Methods: 5 of the 59 mandals in the district of Nalgonda were selected by simple random sampling. Then, 3 schools from each of these selected mandals were chosen at random. All the eligible 6 th and 9 th standard children were considered for final analysis. The demographic and other relevant information was collected by 3 trained and calibrated dentists, using a structured questionnaire. Dental caries were recorded using dentition status and treatment needs and fluorosis were recorded by Dean′s fluorosis index. The statistical analysis was done using SPSS version 16. Results: The prevalence of dental caries among children was 56.3% with the highest in below optimal fluoride area (71.3% and lowest in optimal fluoride area (24.3%. The prevalence of dental fluorosis was 71.5%. The prevalence was 39.7% in below optimal fluoride area and 100% in high and very fluoride areas. The prevalence and severity of fluorosis increased with increasing fluoride concentration. The caries experience was more among boys than girls. Conclusion: There was a negative correlation between dental caries and fluoride concentration for the entire study population. However, in high fluoride areas, there was a positive correlation between fluoride concentration and dental caries. Water defluoridation on an urgent basis is a priority here than water fluoridation, because the prevalence and severity of dental flurorosis is very high.

  16. Pulp response in primary teeth with deep residual caries treated with silver fluoride and glass ionomer cement ('atraumatic' technique)

    Science.gov (United States)

    Gotjamanos, T

    1996-10-01

    Histological assessment of the dental pulps of 55 carious primary teeth was carried out 3 to 58 months after treatment by the 'atraumatic' technique involving application of 40 per cent silver fluoride to residual caries followed by restoration with glass ionomer cement. Fifty of the 55 teeth examined showed a favourable pulpal response, inducing presence of abundant reparative dentine and a wide odontoblast layer. Histological comparisons were made between these teeth and others not treated with silver fluoride but restored with glass ionomer cement, amalgam or zinc oxide and eugenol. Possible mechanisms of the action of silver fluoride in arresting residual caries are discussed. The question of whether or not treatment of carious dentine with silver fluoride represents a biologically acceptable clinical procedure cannot be answered on the basis of pulpal histology alone. The very high concentration of fluoride in commercial preparations of silver fluoride raises several questions concerning its clinical safety.

  17. Evaluation of fluoride release from experimental TiF4 and NaF varnishes in vitro

    OpenAIRE

    Livia Picchi COMAR; SOUZA,Beatriz Martines de; Grizzo, Larissa Tercilia; Marília Afonso Rabelo BUZALAF; Magalhães,Ana Carolina

    2014-01-01

    Fluoride varnishes play an important role in the prevention of dental caries, promoting the inhibition of demineralization and the increase of remineralization. Objective: This study aimed to analyze the amount of fluoride released into water and artificial saliva from experimental TiF4 and NaF varnishes, with different concentrations, for 12 h. Material and Methods: Fluoride varnishes were applied on acrylic blocks and then immersed in 10 ml of deionized water and artificial saliva in ...

  18. Fluoride in drinking water, brick tea infusion and human urine in two counties in Inner Mongolia, China.

    Science.gov (United States)

    Li, Hai-rong; Liu, Qing-bin; Wang, Wu-yi; Yang, Lin-sheng; Li, Yong-hua; Feng, Fu-jian; Zhao, Xiao-yu; Hou, Kun; Wang, Ge

    2009-08-15

    The objective of this study was to detect the fluoride level in the drinking water and the urine of habitants aged 16-55 years living in Inner Mongolia China. Furthermore, fluoride concentration of the brick tea infusion samples which were drunk by Mongolia herdsmen in everyday life living in SumuErga village of Ejin Horo Banner, Inner Mongolia China was also determined. A total of 117 participants (61 female and 56 male) were recruited from two counties for a cross-sectional study on health effects of chronic fluoride exposure from drinking water and drinking brick tea infusion. The fluoride concentration in drinking water, urine and brick tea infusion samples were determined using fluoride ion selective electrode method obtained from the Ministry of Health of the People's Republic of China. The average fluoride concentration in drinking water samples was 0.32+/-0.01 mg/L at AretengXire town of Ejin Horo Banner, 0.70+/-0.19 mg/L at SumuErga village of Ejin Horo Banner, and 2.68+/-1.15 mg/L at ZhalaiNuoer district of Manzhouli city. The average fluoride concentration in brick tea infusion samples which collected from Mongolia herdsmen at SumuErga village of Ejin Horo Banner was 1.81+/-1.09 mg/L. The average urinary fluoride concentration at AretengXire town of Ejin Horo Banner was 0.59+/-0.48 mg/L, at SumuErga village of Ejin Horo Banner was 1.45+/-0.93 mg/L and at ZhalaiNuoer district of Manzhouli city was 3.06+/-1.53 mg/L. The higher fluoride levels in the urine of participants may be associated to higher fluoride in drinking water at ZhalaiNuoer of Manzhouli city. However, drinking brick tea infusions with higher fluoride may be the cause of the higher fluoride contents in the Mongolia herdsmen's urine.

  19. Dental fluorosis and its association with the use of fluoridated toothpaste among middle school students of Delhi

    OpenAIRE

    2010-01-01

    Introduction: Fluorosis can manifest as dental fluorosis (seen mostly in secondary dentition), skeletal fluorosis, and systemic fluorosis. Groundwater with high fluoride concentrations, diet rich in fish and tea, indoor air-pollution, and use of fluoride toothpastes may contribute considerably to total exposure. Objective: To assess the prevalence of dental fluorosis and associated factors particularly fluoridated toothpastes, among middle school children of a resettlement colony in Delhi. Ma...

  20. Lack of DNA damage induced by fluoride on mouse lymphoma and human fibroblast cells by single cell gel (comet) assay

    OpenAIRE

    Ribeiro,Daniel Araki; Alves de Lima, Patrícia Lepage; Marques, Mariângela Esther Alencar; Salvadori,Daisy Maria Favero

    2006-01-01

    Fluoride has widely been used in Dentistry because it is a specific and effective caries prophylactic agent. However, excess fluoride may represent a hazard to human health, especially by causing injury on genetic apparatus. Genotoxicity tests constitute an important part of cancer research for risk assessment of potential carcinogens. In this study, the potential DNA damage associated with exposure to fluoride was assessed by the single cell gel (comet) assay in vitro. Mouse lymphoma and hum...