WorldWideScience

Sample records for behavior modification techniques

  1. Treating Retentive Encopresis: Dietary Modification and Behavioral Techniques.

    Science.gov (United States)

    Nabors, Laura; Morgan, Sam B.

    1995-01-01

    A home-based contingency management program, consisting of diet modification, laxatives, correction for soiling accidents, stimulus control training, and positive reinforcement, was implemented for treatment of a 4-year-old encopretic male. The findings provide evidence supporting the effectiveness of dietary modification combined with behavior…

  2. Behavior Modification in the Classroom

    Science.gov (United States)

    Whitman, Mryon; Whitman, Joan

    1971-01-01

    This article presents the theoretical rationale for behavior modification, principally through its comparison with traditional psychotherapies, and suggests some behavior modification techniques for the classroom management of maladaptive behavior. (Author)

  3. Behavior Modification

    Science.gov (United States)

    Boardman, Randolph M.

    2010-01-01

    In a perfect world, students would never talk back to school staff and never argue or fight with each other. They would complete all their assigned tasks, and disciplinary actions never would be needed. Unfortunately, people don't live in a perfect world. Student behavior is a daily concern. Teachers continue to refer students to the office as a…

  4. Behavior modification techniques used to prevent gestational diabetes: a systematic review of the literature.

    Science.gov (United States)

    Skouteris, Helen; Morris, Heather; Nagle, Cate; Nankervis, Alison

    2014-04-01

    The prevalence of gestational diabetes mellitus (GDM) and obesity is increasing in developed countries, presenting significant challenges to acute care and public health. The aim of this study is to systematically review published controlled trials evaluating behavior modification interventions to prevent the development of GDM. Nine studies were identified involving such techniques as repetition of information, use of verbal and written educational information, goal setting, and planning, in addition to group and individual counseling sessions. Of the 3 trials with GDM incidence as a primary outcome, only 1 showed a significant reduction. GDM was a secondary outcome in 6 studies where the prevention of excessive gestational weight gain was the primary outcome and only 1 trial study determined an effective intervention. The small number of effective interventions highlights a significant gap in evidence to inform maternity health policy and practice.

  5. Behavior Modification in Coaching.

    Science.gov (United States)

    Lynch, Annette Rutt; Stillman, Stephen M.

    1979-01-01

    An example of behavior modification used in athletic coaching is presented. The case study involves a member of a women's basketball team and details the use of behavior modification for both weight reduction and skill improvement. (JMF)

  6. Behavior Modification/Traditional Techniques for Students with Emotional and Behavioral Disorders

    Science.gov (United States)

    Mooney, Paul; Ryan, Joseph B.; Gunter, Philip L.; Denny, R. Kenton

    2012-01-01

    In addressing positive general education teaching practices for use with students with or at risk for emotional and behavioral disorders (EBD), the chapter emphasizes teacher behavior change research that has been informed by applied behavior analytic (ABA) principles. Its central theme is that general education teachers can access research…

  7. Mechanisms of behavior modification in clinical behavioral medicine in China.

    Science.gov (United States)

    Yang, Zhiyin; Su, Zhonghua; Ji, Feng; Zhu, Min; Bai, Bo

    2014-08-01

    Behavior modification, as the core of clinical behavioral medicine, is often used in clinical settings. We seek to summarize behavior modification techniques that are commonly used in clinical practice of behavioral medicine in China and discuss possible biobehavioral mechanisms. We reviewed common behavior modification techniques in clinical settings in China, and we reviewed studies that explored possible biobehavioral mechanisms. Commonly used clinical approaches of behavior modification in China include behavior therapy, cognitive therapy, cognitive-behavioral therapy, health education, behavior management, behavioral relaxation training, stress management intervention, desensitization therapy, biofeedback therapy, and music therapy. These techniques have been applied in the clinical treatment of a variety of diseases, such as chronic diseases, psychosomatic diseases, and psychological disorders. The biobehavioral mechanisms of these techniques involve the autonomic nervous system, neuroendocrine system, neurobiochemistry, and neuroplasticity. Behavior modification techniques are commonly used in the treatment of a variety of somatic and psychological disorders in China. Multiple biobehavioral mechanisms are involved in successful behavior modification.

  8. Human Rights and Behavior Modification

    Science.gov (United States)

    Roos, Philip

    1974-01-01

    Criticisms of behavior modification, which charge that it violates ethical and legal principles, are discussed and reasons are presented to explain behavior modification's susceptibility to attack. (GW)

  9. Gender Differences in Workplace Deviant Behavior of University Teachers and Modification Techniques

    Science.gov (United States)

    Anwar, Muhammad Nadeem; Sarwar, Muhammad; Awan, Riffat-un-Nisa; Arif, Muhammad Irfan

    2011-01-01

    Any behavior that does not conform to social organizational norms is deviance. This study was conducted to test whether there is any difference in organizational deviance and interpersonal deviance behavior, deviance behavior of male-female university teachers. All teaching staff of the University of Sargodha was target population and for…

  10. Self-Modification Technique for the Control of Eating Behavior for the Visually Handicapped.

    Science.gov (United States)

    Snoy, Mary T.; van Benten, Letitia

    1978-01-01

    A ten-week study was done of four visually handicapped overweight adolescents (ages 15-19 years) in a residential school to evaluate the efficacy of an operant conditioning technique designed to promote weight loss by altering eating habits. (Author/DLS)

  11. Medication for Behavior Modification in Birds

    NARCIS (Netherlands)

    van Zeeland, Yvonne

    2018-01-01

    The use of behavior modifying drugs may be considered in birds with behavior problems, especially those refractory to behavior modification therapy and environmental management. To accomplish behavior change, a variety of drugs can be used, including psychoactive drugs, hormones, antihistamines,

  12. Low-temperature oxidizing plasma surface modification and composite polymer thin-film fabrication techniques for tailoring the composition and behavior of polymer surfaces

    Science.gov (United States)

    Tompkins, Brendan D.

    This dissertation examines methods for modifying the composition and behavior of polymer material surfaces. This is accomplished using (1) low-temperature low-density oxidizing plasmas to etch and implant new functionality on polymers, and (2) plasma enhanced chemical vapor deposition (PECVD) techniques to fabricate composite polymer materials. Emphases are placed on the structure of modified polymer surfaces, the evolution of polymer surfaces after treatment, and the species responsible for modifying polymers during plasma processing. H2O vapor plasma modification of high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and 75A polyurethane (PU) was examined to further our understanding of polymer surface reorganization leading to hydrophobic recovery. Water contact angles (wCA) measurements showed that PP and PS were the most susceptible to hydrophobic recovery, while PC and HDPE were the most stable. X-ray photoelectron spectroscopy (XPS) revealed a significant quantity of polar functional groups on the surface of all treated polymer samples. Shifts in the C1s binding energies (BE) with sample age were measured on PP and PS, revealing that surface reorganization was responsible for hydrophobic recovery on these materials. Differential scanning calorimetry (DSC) was used to rule out the intrinsic thermal properties as the cause of reorganization and hydrophobic recovery on HDPE, LDPE, and PP. The different contributions that polymer cross-linking and chain scission mechanisms make to polymer aging effects are considered. The H2O plasma treatment technique was extended to the modification of 0.2 microm and 3.0 microm track-etched polycarbonate (PC-TE) and track-etched polyethylene terephthalate (PET-TE) membranes with the goal of permanently increasing the hydrophilicity of the membrane surfaces. Contact angle measurements on freshly treated and aged samples confirmed the wettability of the

  13. Medication for Behavior Modification in Birds.

    Science.gov (United States)

    van Zeeland, Yvonne

    2018-01-01

    The use of behavior modifying drugs may be considered in birds with behavior problems, especially those refractory to behavior modification therapy and environmental management. To accomplish behavior change, a variety of drugs can be used, including psychoactive drugs, hormones, antihistamines, analgesics, and anticonvulsants. Because their prescription to birds is off-label, these drugs are considered appropriate only when a sound rationale can be provided for their use. This requires a (correct) behavioral diagnosis to be established. In addition, regular monitoring and follow-up are warranted to determine the efficacy of the treatment and evaluate the occurrence of potential adverse side effects. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Use of Behavior Modification with L. D. Students.

    Science.gov (United States)

    Belcastro, Frank P.

    Reviewed was research on the application of operant conditioning techniques to the modification of the classroom behavior of learning disabled students. The methodology and results of the studies were examined and each study summarized. It was concluded that there was little common interpretation of the term "learning disabilities" and that all of…

  15. Behavior Modification: Basic Principles. Third Edition

    Science.gov (United States)

    Lee, David L.; Axelrod, Saul

    2005-01-01

    This classic book presents the basic principles of behavior emphasizing the use of preventive techniques as well as consequences naturally available in the home, business, or school environment to change important behaviors. This book, and its companion piece, "Measurement of Behavior," represents more than 30 years of research and strategies in…

  16. Behavior Modification Revisited: Practical Application for the Reading Teacher.

    Science.gov (United States)

    Lang, Deborah Odom; Lang, William Steve

    An informal study examined the impact of a simple behavior modification procedure on the reading habits of second and fifth grade students. Behavior modification theory was pared down to two rules ("reinforce proper behavior" and "reinforce anything close to proper behavior") so that no additional burdens would be placed on…

  17. Dynamic Binary Modification Tools, Techniques and Applications

    CERN Document Server

    Hazelwood, Kim

    2011-01-01

    Dynamic binary modification tools form a software layer between a running application and the underlying operating system, providing the powerful opportunity to inspect and potentially modify every user-level guest application instruction that executes. Toolkits built upon this technology have enabled computer architects to build powerful simulators and emulators for design-space exploration, compiler writers to analyze and debug the code generated by their compilers, software developers to fully explore the features, bottlenecks, and performance of their software, and even end-users to extend

  18. PREVIEW Behavior Modification Intervention Toolbox (PREMIT)

    DEFF Research Database (Denmark)

    Kahlert, Daniela; Unyi-Reicherz, Annelie; Stratton, Gareth

    2016-01-01

    and feasible to evaluate. PREMIT is part of an intervention trial, which aims to prevent the onset of type-2 diabetes in pre-diabetics in eight clinical centers across the world by guiding them in changing their physical activity and dietary behavior through a group counseling approach. METHODS: The program...... development took five progressive steps, in line with the Public Health Action Cycle: (1) Summing-up the intervention goal(s), target group and the setting, (2) uncovering the generative psychological mechanisms, (3) identifying behavior change techniques and tools, (4) preparing for evaluation and (5...

  19. Hypnotherapy: A Combined Approach Using Psychotherapy and Behavior Modification.

    Science.gov (United States)

    Goldberg, Bruce

    1987-01-01

    Discusses use of hypnosis in traditional psychoanalysis, compares use of hypnosis in behavior modification therapy versus psychoanalysis, and presents a hypno-behavioral model which combines both approaches using hypnosis as the medium. (Author/NB)

  20. Behavior modification therapy in hyperactive children. Research and clinical implications.

    Science.gov (United States)

    Wolraich, M L

    1979-09-01

    One hundred fifty-seven studies employing behavior modification in the management of hyperactive and disruptive children were reviewed. The studies were analyzed against standards of scientific validity. The review found: (1) behavior modification was effective in alleviating problem behaviors; (2) token programs were the most commonly used; (3) both positive reinforcement and punishment were effective; positive reinforcement, however, had the advantage of improving self-esteem; (4) behavioral problems occurring in the home most likely require a home-based program; (5) behavior modification and stimulant medication can be used simultaneously, often with additive effects; and (6) long-term benefits beyond one year have not been assessed.

  1. Scar modification. Techniques for revision and camouflage.

    Science.gov (United States)

    Horswell, B B

    1998-09-01

    The surgery and management of scars is a protracted and staged process that includes preparation of the skin through hygienic measures, scar softening (if indicated) with steroids, massage and pressure dressings, skilled execution of the surgical plan, and thorough postoperative wound care. This process generally covers a 1-year period for the various stages mentioned. Many general host and local skin factors will directly affect the final revision result. The two most important indirect factors that the surgeon must endeavor to control are optimal patient preparation and cutaneous health, and patient compliance with, and an ability to carry out, those wound care measures that the surgeon prescribes. Keloid and burn contracture scars represent two entities that are complicated and challenging to treat owing to their abnormal morphophysiologic features. Management of these scars is prolonged, and the patient must understand that the ultimate result will usually be a compromise. New grafting techniques, such as cultured autodermal grafts, offer improved initial management of burn wounds that may subsequently optimize scar revision in these patients. Keloids, and to a lesser extent hypertrophic scars, require steroid injections, pressure treatment, careful surgery, and protracted wound support and pressure treatment (exceeding 6 months) after surgery.

  2. A review of different behavior modification strategies designed to reduce sedentary screen behaviors in children.

    Science.gov (United States)

    Steeves, Jeremy A; Thompson, Dixie L; Bassett, David R; Fitzhugh, Eugene C; Raynor, Hollie A

    2012-01-01

    Previous research suggests that reducing sedentary screen behaviors may be a strategy for preventing and treating obesity in children. This systematic review describes strategies used in interventions designed to either solely target sedentary screen behaviors or multiple health behaviors, including sedentary screen behaviors. Eighteen studies were included in this paper; eight targeting sedentary screen behaviors only, and ten targeting multiple health behaviors. All studies used behavior modification strategies for reducing sedentary screen behaviors in children (aged 1-12 years). Nine studies only used behavior modification strategies, and nine studies supplemented behavior modification strategies with an electronic device to enhance sedentary screen behaviors reductions. Many interventions (50%) significantly reduced sedentary screen behaviors; however the magnitude of the significant reductions varied greatly (-0.44 to -3.1 h/day) and may have been influenced by the primary focus of the intervention, number of behavior modification strategies used, and other tools used to limit sedentary screen behaviors.

  3. On the genetic modification of psychology, personality, and behavior.

    Science.gov (United States)

    Neitzke, Alex B

    2012-12-01

    I argue that the use of heritable modifications for psychology, personality, and behavior should be limited to the reversal or prevention of relatively unambiguous instances of pathology or likely harm (e.g. sociopathy). Most of the likely modifications of psychological personality would not be of this nature, however, and parents therefore should not have the freedom to make such modifications to future children. I argue by examining the viewpoints of both the individual and society. For individuals, modifications would interfere with their capacity for self-determination in a way that undermines the very concept of self-determination. I argue that modification of psychology and personality is unlike present parenting in morally significant ways. For society, modification offers a medium for power to manipulate the makeup of persons and populations, possibly causing biological harm to the species and altering our conceptions of social responsibility.

  4. Behavior Modification in Special Education in the Federal Republic of Germany

    Science.gov (United States)

    Barkey, Peter

    1977-01-01

    West German literature on educational behavior modification is summarized, and empirical studies of behavior modification intervention with special education students at the elementary level are surveyed. (SBH)

  5. Obesity Treatment: Environment and Behavior Modification.

    Science.gov (United States)

    Murphy, Maryanne

    2016-09-01

    Obesity is commonly encountered in veterinary patients. Although there are various published dietary approaches to achieving weight loss, successful long-term prevention of weight regain has proven elusive. Adding environmental and behavioral treatment strategies to a weight loss plan may help the veterinary team, the pet, and the pet owner maximize the effectiveness of the program. Because the owner directly affects the environment and behavior of the pet undergoing a weight loss plan, treatment strategies with an emphasis on owner involvement is the focus of this review. Veterinary use of the 5 A's behavioral counseling approach with the pet owner is discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. Modification of feeding circuits in the evolution of social behavior.

    Science.gov (United States)

    Fischer, Eva K; O'Connell, Lauren A

    2017-01-01

    Adaptive trade-offs between foraging and social behavior intuitively explain many aspects of individual decision-making. Given the intimate connection between social behavior and feeding/foraging at the behavioral level, we propose that social behaviors are linked to foraging on a mechanistic level, and that modifications of feeding circuits are crucial in the evolution of complex social behaviors. In this Review, we first highlight the overlap between mechanisms underlying foraging and parental care and then expand this argument to consider the manipulation of feeding-related pathways in the evolution of other complex social behaviors. We include examples from diverse taxa to highlight that the independent evolution of complex social behaviors is a variation on the theme of feeding circuit modification. © 2017. Published by The Company of Biologists Ltd.

  7. Behavior Modification Through Covert Semantic Desensitization

    Science.gov (United States)

    Hekmat, Hamid; Vanian, Daniel

    1971-01-01

    Results support the hypothesized relationship between meaning and phobia. Semantic desensitization techniques based on counter conditioning of meaning were significantly effective in altering the semantic value of the word from unpleasantness to neutrality. (Author)

  8. Self-Concept Change in Behavior Modification

    Science.gov (United States)

    Ryan, Victor L.; And Others

    1976-01-01

    Changes in self-concept as a function of behavioral treatment for test anxiety are investigated. Test-anxious subjects (N=72) were randomly assigned to systematic desensitization, relaxation-training only, or no-treatment control conditions. Results indicate that the desensitization and relaxation treatments were both effective in reducing test…

  9. Nanotubular surface modification of metallic implants via electrochemical anodization technique.

    Science.gov (United States)

    Wang, Lu-Ning; Jin, Ming; Zheng, Yudong; Guan, Yueping; Lu, Xin; Luo, Jing-Li

    2014-01-01

    Due to increased awareness and interest in the biomedical implant field as a result of an aging population, research in the field of implantable devices has grown rapidly in the last few decades. Among the biomedical implants, metallic implant materials have been widely used to replace disordered bony tissues in orthopedic and orthodontic surgeries. The clinical success of implants is closely related to their early osseointegration (ie, the direct structural and functional connection between living bone and the surface of a load-bearing artificial implant), which relies heavily on the surface condition of the implant. Electrochemical techniques for modifying biomedical implants are relatively simple, cost-effective, and appropriate for implants with complex shapes. Recently, metal oxide nanotubular arrays via electrochemical anodization have become an attractive technique to build up on metallic implants to enhance the biocompatibility and bioactivity. This article will thoroughly review the relevance of electrochemical anodization techniques for the modification of metallic implant surfaces in nanoscale, and cover the electrochemical anodization techniques used in the development of the types of nanotubular/nanoporous modification achievable via electrochemical approaches, which hold tremendous potential for bio-implant applications. In vitro and in vivo studies using metallic oxide nanotubes are also presented, revealing the potential of nanotubes in biomedical applications. Finally, an outlook of future growth of research in metallic oxide nanotubular arrays is provided. This article will therefore provide researchers with an in-depth understanding of electrochemical anodization modification and provide guidance regarding the design and tuning of new materials to achieve a desired performance and reliable biocompatibility.

  10. Mitral-aortic annular enlargement: modification of Manouguian's technique

    Directory of Open Access Journals (Sweden)

    Costa Mario Gesteira

    2002-01-01

    Full Text Available We hereby present a technical modification for mitral-aortic annular enlargement. The mitral valve is replaced through the retro-septal approach, avoiding patches for left atrial roof closure. We report a mitral-aortic valve replacement in a patient whose original annuli would preclude adequate prostheses. The simultaneous annular enlargement may be necessary for avoiding patient-prosthesis mismatch and for reconstructing destroyed mitral and aortic annuli. The technique may minimize the risk of bleeding and of paravalvular leakage, using an approach well known to cardiac surgeons.

  11. Common sense behavior modification: a guide for practitioners.

    Science.gov (United States)

    Horwitz, Debra F; Pike, Amy L

    2014-05-01

    Behavior problems are often given as a reason for pet relinquishment to shelters. When presented with any behavior problem, veterinarians should perform a thorough physical examination (including neurologic and orthopedic examination) and a minimum database, including a complete blood cell count, chemistry panel, and total T4 and free T4 by equilibrium dialysis if values are low to rule out any medical contributions. Veterinarians should be a source of information regarding management, safety, and basic behavior modification for common behavior problems. Additionally, various control devices offer pet owners the ability to better manage their pets in difficult situations. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. A Review of Different Behavior Modification Strategies Designed to Reduce Sedentary Screen Behaviors in Children

    Directory of Open Access Journals (Sweden)

    Jeremy A. Steeves

    2012-01-01

    Full Text Available Previous research suggests that reducing sedentary screen behaviors may be a strategy for preventing and treating obesity in children. This systematic review describes strategies used in interventions designed to either solely target sedentary screen behaviors or multiple health behaviors, including sedentary screen behaviors. Eighteen studies were included in this paper; eight targeting sedentary screen behaviors only, and ten targeting multiple health behaviors. All studies used behavior modification strategies for reducing sedentary screen behaviors in children (aged 1–12 years. Nine studies only used behavior modification strategies, and nine studies supplemented behavior modification strategies with an electronic device to enhance sedentary screen behaviors reductions. Many interventions (50% significantly reduced sedentary screen behaviors; however the magnitude of the significant reductions varied greatly (−0.44 to −3.1 h/day and may have been influenced by the primary focus of the intervention, number of behavior modification strategies used, and other tools used to limit sedentary screen behaviors.

  13. Modification of PMMA/graphite nanocomposites through ion beam technique

    Science.gov (United States)

    Singhal, Prachi; Rattan, Sunita; Avasthi, Devesh Kumar; Tripathi, Ambuj

    2013-08-01

    Swift heavy ion (SHI) irradiation is a special technique for inducing physical and chemical modifications in bulk materials. In the present work, the SHI hs been used to prepare nanocomposites with homogeneously dispersed nanoparticles. The nanographite was synthesized from graphite using the intercalation-exfoliation method. PMMA Poly(methyl methacrylate)/graphite nanocomposites have been synthesized by in situ polymerization. The prepared PMMA/graphite nanocomposite films were irradiated with SHI irradiation (Ni ion beam, 80 MeV and C ion beam, 50 MeV) at a fluence of 1×1010 to 3×1012 ions/cm2. The nanocomposite films were characterized by scanning electron microscope (SEM) and were evaluated for their electrical and sensor properties. After irradiation, significant changes in surface morphology of nanocomposites were observed as evident from the SEM images, which show the presence of well-distributed nanographite platelets. The irradiated nanocomposites exhibit better electrical and sensor properties for the detection of nitroaromatics with marked improvement in sensitivity as compared with unirradiated nanocomposites.

  14. Through Knee Amputation: Technique Modifications and Surgical Outcomes

    Directory of Open Access Journals (Sweden)

    Frank P Albino

    2014-09-01

    Full Text Available BackgroundKnee disarticulations (KD are most commonly employed following trauma or tumor resection but represent less than 2% of all lower extremity amputations performed in the United States annually. KDs provide enhanced proprioception, a long lever arm, preservation of adductor muscle insertion, decreased metabolic cost of ambulation, and an end weight-bearing stump. The role for KDs in the setting of arterial insufficiency or overwhelming infection is less clear. The purpose of this study is to describe technique modifications and report surgical outcomes following KDs at a high-volume Limb Salvage Center.MethodsA retrospective study of medical records for all patients who underwent a through-knee amputation performed by the senior author (C.E.A. between 2004 and 2012 was completed. Medical records were reviewed to collect demographic, operative, and postoperative information for each of the patients identified.ResultsBetween 2004 and 2012, 46 through-knee amputations for 41 patients were performed. The mean patient age was 68 and indications for surgery included infection (56%, arterial thrombosis (35%, and trauma (9%. Postoperative complications included superficial cellulitis (13%, soft tissue infection (4%, and flap ischemia (4% necessitating one case of surgical debridement (4% and four trans-femoral amputations (9%. 9 (22% patients went on to ambulate. Postoperative ambulation was greatest in the traumatic cohort and for patients less than 50 years of age, P<0.05. Alternatively, diabetes mellitus and infection reduced the likelihood of postoperative ambulation, P<0.01.ConclusionsKnee disarticulations are a safe and effective alternative to other lower extremity amputations when clinically feasible. For patient unlikely to ambulate, a through-knee amputation maximizes ease of transfers, promotes mobility by providing a counterbalance, and eliminates the potential for knee flexion contracture with subsequent skin breakdown.

  15. Improving Maladaptive Behaviors Using Sensory Integration Techniques.

    Science.gov (United States)

    Shuman, Theresa

    A study examined the use of sensory integration techniques to reduce the maladaptive behaviors that interfered with the learning of nine high school students with mental impairments attending a special school. Maladaptive behaviors identified included rocking, toe walking, echolalia, resistance to change, compulsive behaviors, aggression,…

  16. Behavior modification and pharmacotherapy for separation anxiety in a 2-year-old pointer cross

    OpenAIRE

    Lem, Michelle

    2002-01-01

    Separation anxiety is a common behavioral problem in dogs. Treatment is based on developing a behavior modification protocol that gradually desensitizes and counter-conditions the dog to being left alone, by rewarding calm, relaxed behavior. Judicious use of pharmacotherapy can be a useful adjunct to a behavior modification program.

  17. Near-surface modifications for improved crack tolerant behavior of high strength alloys: trends and prospects

    International Nuclear Information System (INIS)

    Hettche, L.R.; Rath, B.B.

    1982-01-01

    The purpose of this chapter is to examine the potential of surface modifications in improving the crack tolerant behavior of high strength alloys. Provides a critique of two of the most promising and versatile techniques: ion implantation and laser beam surface processing. Discusses crack tolerant properties; engineering characterization; publication trends and Department of Defense interests; and emergent surface modification techniques. Finds that the efficiency with which high strength alloys can be incorporated into a structure or component is dependent on the following crack tolerant properties: fracture toughness, fatigue resistance, sustained loading cracking resistance, fretting fatigue resistance, and hydrogen embrittlement resistance. Concludes that ion implantation and laser surface processing coupled with other advanced metallurgical procedures and fracture mechanic analyses provide the means to optimize both the bulk and surface controlled crack tolerant properties

  18. Modification-specific proteomics: strategies for characterization of post-translational modifications using enrichment techniques

    DEFF Research Database (Denmark)

    Zhao, Yingming; Jensen, Ole N

    2009-01-01

    More than 300 different types of protein post-translational modifications (PTMs) have been described, many of which are known to have pivotal roles in cellular physiology and disease. Nevertheless, only a handful of PTMs have been extensively investigated at the proteome level. Knowledge of protein...... substrates and their PTM sites is key to dissection of PTM-mediated cellular processes. The past several years have seen a tremendous progress in developing MS-based proteomics technologies for global PTM analysis, including numerous studies of yeast and other microbes. Modification-specific enrichment...

  19. Low-temperature plasma techniques in surface modification of biomaterials

    International Nuclear Information System (INIS)

    Feng Xiangfen; Xie Hankun; Zhang Jing

    2002-01-01

    Since synthetic polymers usually can not meet the biocompatibility and bio-functional demands of the human body, surface treatment is a prerequisite for them to be used as biomaterials. A very effective surface modification method, plasma treatment, is introduced. By immobilizing the bio-active molecules with low temperature plasma, polymer surfaces can be modified to fully satisfy the requirements of biomaterials

  20. Visualization techniques for malware behavior analysis

    Science.gov (United States)

    Grégio, André R. A.; Santos, Rafael D. C.

    2011-06-01

    Malware spread via Internet is a great security threat, so studying their behavior is important to identify and classify them. Using SSDT hooking we can obtain malware behavior by running it in a controlled environment and capturing interactions with the target operating system regarding file, process, registry, network and mutex activities. This generates a chain of events that can be used to compare them with other known malware. In this paper we present a simple approach to convert malware behavior into activity graphs and show some visualization techniques that can be used to analyze malware behavior, individually or grouped.

  1. Attentional bias modification for addictive behaviors: clinical implications.

    Science.gov (United States)

    Cox, W Miles; Fadardi, Javad S; Intriligator, James M; Klinger, Eric

    2014-06-01

    When a person has a goal of drinking alcohol or using another addictive substance, the person appears to be automatically distracted by stimuli related to the goal. Because the attentional bias might propel the person to use the substance, an intervention might help modify it. In this article, we discuss techniques that have been developed to help people overcome their attentional bias for alcohol, smoking-related stimuli, drugs, or unhealthy food. We also discuss how these techniques are being adapted for use on mobile devices. The latter would allow people with an addictive behavior to use the attentional training in privacy and as frequently as needed. The attentional training techniques discussed here appear to have several advantages. They are inexpensive, can be fun to use, and have flexibility in when, where, and how often they are used. The evidence so far also suggests that they are effective.

  2. Measurement and modification of the EEG and related behavior

    Science.gov (United States)

    Sterman, M. B.

    1991-01-01

    Electrophysiological changes in the sensorimotor pathways were found to accompany the effect of rhythmic EEG patterns in the sensorimotor cortex. Additionally, several striking behavioral changes were seen, including in particular an enhancement of sleep and an elevation of seizure threshold to epileptogenic agents. This raised the possibility that human seizure disorders might be influenced therapeutically by similar training. Our objective in human EEG feedback training became not only the facilitation of normal rhythmic patterns, but also the suppression of abnormal activity, thus requiring complex contingencies directed to the normalization of the sensorimotor EEG. To achieve this, a multicomponent frequency analysis was developed to extract and separate normal and abnormal elements of the EEG signal. Each of these elements was transduced to a specific component of a visual display system, and these were combined through logic circuits to present the subject with a symbolic display. Variable criteria provided for the gradual shaping of EEG elements towards the desired normal pattern. Some 50-70% of patients with poorly controlled seizure disorders experienced therapeutic benefits from this approach in our laboratory, and subsequently in many others. A more recent application of this approach to the modification of human brain function in our lab has been directed to the dichotomous problems of task overload and underload in the contemporary aviation environment. At least 70% of all aviation accidents have been attributed to the impact of these kinds of problems on crew performance. The use of EEG in this context has required many technical innovations and the application of the latest advances in EEG signal analysis. Our first goal has been the identification of relevant EEG characteristics. Additionally, we have developed a portable recording and analysis system for application in this context. Findings from laboratory and in-flight studies suggest that we

  3. The Use of Behavior Therapy Techniques in Crisis-Intervention: A Case Report

    Science.gov (United States)

    Balson, Paul M.

    1971-01-01

    In the case of a man with an acute onset of stuttering and massive free floating anxiety following an automobile accident, a variety of behavioral techniques, including relaxation training, assertive training, graded rehearsal and modification of behavioral operants were employed, with the complete eradication of the symptoms in five sessions. The…

  4. Supportive intervention using a mobile phone in behavior modification.

    Science.gov (United States)

    Hareva, David H; Okada, Hiroki; Kitawaki, Tomoki; Oka, Hisao

    2009-04-01

    The authors previously developed a mobile ecological momentary assessment (EMA) system as a real-time data collection device using a mobile phone. In this study, a real-time advice function and real-time reporting function were added to the previous system as a supportive intervention. The improved system was found to work effectively and was applied to several clinical cases, including patients with depressive disorder, dizziness, smoking habit, and bronchial asthma. The average patient compliance rate was high (89%) without the real-time advice and higher (93%) with the advice. The trends in clinical data for patients using a mobile EMA with/without the new function were analyzed for up to several months. In the case of dizziness, an improving trend in its clinical data was observed after applying the real-time advice, and in the case of depressive disorder, a stabilizing trend was observed. The mobile EMA system with the real-time advice function could be useful as a supportive intervention in behavior modification and for motivating patients in self-management of their disease.

  5. Radioimmunoassay of fibrinopeptide A: Modifications of technique and clinical trials

    International Nuclear Information System (INIS)

    Schmid, M.

    1981-01-01

    In 1971 Nossel and coworkers developed a highly sensitive radioimmunoassay for the determination of plasma concentration of fibrinopeptide A. Our own experience gained using this test is reported here as well as a number of improvements in methodology which have not only led to a shortening of the whole test procedure to one day but also to greater ease of handling. The modifications concern a gel adsorption procedure for the extraction of FPA from defibrinated plasma samples, the double antibody method for separating free and antibody-bound tracer-phase in assay and automatic evaluation of test results with the aid of a suitable computer programme. Considerations concerning the specificity of conclusions drawn from the test, in particular the necessity of keepin gout interfering plasmin-induced fibrinogen break-down products, play an important role in all changes of methodology. An attempt was made to define a normal range for FPA-plasma levels and a mean value of 1.51 ng/ml at a standard deviation of 0.69 ng/ml was obtained from 42 clinically healthy test patients. Pathologically evaluated FPA-levels were regularly found in patients with septic or thrombotic illness. (orig./MG) [de

  6. Comparing Generative Adversarial Network Techniques for Image Creation and Modification

    NARCIS (Netherlands)

    Pieters, Mathijs; Wiering, Marco

    2018-01-01

    Generative adversarial networks (GANs) have demonstrated to be successful at generating realistic real-world images. In this paper we compare various GAN techniques, both supervised and unsupervised. The effects on training stability of different objective functions are compared. We add an encoder

  7. Method development for arsenic analysis by modification in spectrophotometric technique

    Directory of Open Access Journals (Sweden)

    M. A. Tahir

    2012-01-01

    Full Text Available Arsenic is a non-metallic constituent, present naturally in groundwater due to some minerals and rocks. Arsenic is not geologically uncommon and occurs in natural water as arsenate and arsenite. Additionally, arsenic may occur from industrial discharges or insecticide application. World Health Organization (WHO and Pakistan Standard Quality Control Authority have recommended a permissible limit of 10 ppb for arsenic in drinking water. Arsenic at lower concentrations can be determined in water by using high tech instruments like the Atomic Absorption Spectrometer (hydride generation. Because arsenic concentration at low limits of 1 ppb can not be determined easily with simple spectrophotometric technique, the spectrophotometric technique using silver diethyldithiocarbamate was modified to achieve better results, up to the extent of 1 ppb arsenic concentration.

  8. Totally laparoscopic feeding jejunostomy – a technique modification

    Directory of Open Access Journals (Sweden)

    Maciej Bobowicz

    2011-12-01

    Full Text Available In oncological patients with upper gastrointestinal tract tumours, dysphagia and cachexy necessitate gastrostomy orjejunostomy as the only options of enteral access for long-term feeding. In this article the authors describe a modifiedtechnique of laparoscopic feeding jejunostomy applied during the staging laparoscopy. A 48-year-old male patient withgastroesophageal junction tumour and a 68-year-old male patient with oesophageal tumour were operated on usingthe described technique. Exploratory laparoscopy was performed. Then the feeding jejunostomy was made usinga Cystofix® TUR catheter. The jejunum was fixed to the abdominal wall with four 2.0 Novafil™ transabdominal stitches.Two additional sutures were placed caudally about 4 cm and 8 cm from the jejunostomy, aiming at prevention ofjejunal torsion. Total operating time was 45 min. There was no blood loss. There were no intraoperative complications.The only adverse event was one jejunostomy wound infection that responded well to oral antibiotics. There were nomortalities. The described technique has most of the benefits of laparoscopic feeding jejunostomy with some stepsadded from the open operation making the procedure easier to perform as part of a staging operation with a relativelyshort additional operating time. The proposed transabdominal stitches make the technique easier to apply. Two additional‘anti-torsion sutures’ prevent postoperative volvulus. Use of the Cystofix catheter allows easy introduction of thecatheter into the peritoneal cavity and the jejunal lumen, providing a good seal at the same time. Further studies onlarger groups of patients are required to assess long-term outcomes of the proposed modified technique.

  9. Modification of the Nuss Procedure: The Single-incision Technique

    Directory of Open Access Journals (Sweden)

    Tetsushi Aizawa, MD

    2014-11-01

    Full Text Available Summary: The Nuss procedure is a prevalent minimally invasive surgery for pectus excavatum. Although the Nuss procedure has the advantage of leaving less obtrusive scars, the standard technique requires at least 3 skin incisions to insert several instruments. We experienced 7 cases of the modified Nuss procedure using a single incision during a 7-year period. To facilitate passing of the bar, a traction guide was created according to our unique method. There was no need for a bar stabilizer, and no severe intraoperative complications occurred. All patients exhibited satisfactory short-term results; however, 1 patient suffered from bar rotation and required repeat surgery for fixation. Two patients underwent bar removal via the same single incision without any difficulties.

  10. Incorporating Behavioral Techniques into a Serious Videogame for Children.

    Science.gov (United States)

    Thompson, Debbe

    2017-04-01

    Little is known about how to design serious videogames for children. The purpose of this article is to describe how behavior change techniques promoting self-regulation were incorporated into a serious videogame to help children consume more fruits and vegetables (FVs) and the extent to which these techniques were used by players. A secondary goal is to contribute to the body of scientific knowledge regarding how to design effective serious videogames for children. This research examines the gameplay data from an effective 10-episode online serious videogame promoting FV consumption to preadolescent children in the United States (roughly 9-11-year-olds). Children participated in the self-regulation components. Modifications to reduce potential cognitive overload and inform future game design were identified. This research provided suggestive evidence that behavior change techniques promoting self-regulation can be successfully integrated into a serious videogame for children without detracting from game appeal. It also emphasizes the importance of formative research to the design of an appealing game where children understand and can successfully perform the behavior change procedures.

  11. A process model of voluntary travel behavior modification and effects of Travel Feedback Programs (TFPs)

    OpenAIRE

    Taniguchi, Ayako

    2007-01-01

    This study tested an integrated process model of travel behavior modification. We used a model that combined the theory of planned behavior (TPB), norm activation theory (NAT), a theory of implementation intention, and theories of habit. To test the integrated model, we used panel data (n = 208) obtained before and after travel feedback programs (TFPs); the TFP is a communication program aimed at voluntary travel behavior modification, from automobile use to non-auto means of travel such as p...

  12. Surface modification technique of structural ceramics: ion implantation-assisted multi-arc ion plating

    International Nuclear Information System (INIS)

    Peng Zhijian; Miao Hezhuo; Si Wenjie; Qi Longhao; Li Wenzhi

    2003-01-01

    Through reviewing the advantages and disadvantages of the existed surface modification techniques, a new technique, ion implantation-assisted multi-arc ion plating, was proposed. Using the proposed technique, the surfaces of silicon nitride ceramics were modified by Ti ion implantation, and then three kinds of ternary coatings, (Ti,Al)N, (Ti,Zr)N and (Ti,Cr)N, were deposited on the as-implanted ceramics. The coatings prepared by this technique are of high-hardness and well adhesive to the ceramic substrates. The maximal hardness measured by nanoindentation tests is more than 40 GPa. The maximal critical load by nanoscratch tests is more than 60 mN. The cutting tools prepared by this technique with the presented coatings are of excellent performance in industrial applications. The technique may be promising for the surface modification of structural ceramics. (orig.)

  13. Beyond behavior modification: Benefits of social-emotional/self-regulation training for preschoolers with behavior problems.

    Science.gov (United States)

    Graziano, Paulo A; Hart, Katie

    2016-10-01

    The current study evaluated the initial efficacy of three intervention programs aimed at improving school readiness in preschool children with externalizing behavior problems (EBP). Participants for this study included 45 preschool children (76% boys; Mage=5.16years; 84% Hispanic/Latino background) with at-risk or clinically elevated levels of EBP. During the summer between preschool and kindergarten, children were randomized to receive three newly developed intervention packages. The first and most cost effective intervention package was an 8-week School Readiness Parenting Program (SRPP). Families randomized into the second and third intervention packages received not only the weekly SRPP, but children also attended two different versions of an intensive kindergarten summer readiness class (M-F, 8a.m.-5p.m.) that was part of an 8-week summer treatment program for pre-kindergarteners (STP-PreK). One version included the standard behavioral modification system and academic curriculum (STP-PreK) while the other additionally contained social-emotional and self-regulation training (STP-PreK Enhanced). Baseline, post-intervention, and 6-month follow-up data were collected on children's school readiness outcomes including parent, teacher, and objective assessment measures. Analyses using linear mixed models indicated that children's behavioral functioning significantly improved across all groups in a similar magnitude. Children in the STP-PreK Enhanced group, however, experienced greater growth across time in academic achievement, emotion knowledge, emotion regulation, and executive functioning compared to children in the other groups. These findings suggest that while parent training is sufficient to address children's behavioral difficulties, an intensive summer program that goes beyond behavioral modification and academic preparation by targeting socio-emotional and self-regulation skills can have incremental benefits across multiple aspects of school readiness

  14. The social control of behavior control: behavior modification, Individual Rights, and research ethics in America, 1971-1979.

    Science.gov (United States)

    Rutherford, Alexandra

    2006-01-01

    In 1971, the U.S. Senate Subcommittee on Constitutional Rights began a three-year study to investigate the federal funding of all research involving behavior modification. During this period, operant programs of behavior change, particularly those implemented in closed institutions, were subjected to specific scrutiny. In this article, I outline a number of scientific and social factors that led to this investigation and discuss the study itself. I show how behavioral scientists, both individually and through their professional organizations, responded to this public scrutiny by (1) self-consciously altering their terminology and techniques; (2) considering the need to more effectively police their professional turf; and (3) confronting issues of ethics and values in their work. Finally, I link this episode to the formation of the National Commission for the Protection of Human Subjects of Biomedical and Behavioral Research, whose recommendations resulted in changes to the ethical regulation of federally funded human subjects research that persist to the present day. (c) 2006 Wiley Periodicals, Inc.

  15. Cultural Context and Modification of Behavior Change Theory

    Science.gov (United States)

    Sanders Thompson, Vetta L.

    2009-01-01

    Although social and cultural contexts act on each level of the multilevel ecologic model to affect cancer risk, health behavior, and cancer screening and promotion in health behavior research, people have yet to develop theories that sufficiently integrate the social and environmental context with group and individual behavior. The "Behavioral…

  16. Science and Human Behavior, dualism, and conceptual modification.

    Science.gov (United States)

    Zuriff, G E

    2003-11-01

    Skinner's Science and Human Behavior is in part an attempt to solve psychology's problem with mind-body dualism by revising our everyday mentalistic conceptual scheme. In the case of descriptive mentalism (the use of mentalistic terms to describe behavior), Skinner offers behavioral "translations." In contrast, Skinner rejects explanatory mentalism (the use of mental concepts to explain behavior) and suggests how to replace it with a behaviorist explanatory framework. For experiential mentalism, Skinner presents a theory of verbal behavior that integrates the use of mentalistic language in first-person reports of phenomenal experience into a scientific framework.

  17. Towards convective heat transfer enhancement: surface modification, characterization and measurement techniques

    NARCIS (Netherlands)

    Taha, T.J.; Thakur, D.B.; van der Meer, Theodorus H.

    2012-01-01

    In this work, heat transfer surface modification and heat transfer measurement technique is developed. Heat transfer investigation was aimed to study the effect of carbon nano fibers (extremely high thermal conductive material) on the enhancement level in heat transfer. Synthesis of these carbon

  18. Neutron-induced modifications on Hostaphan and Makrofol wettability and etching behaviors

    International Nuclear Information System (INIS)

    El-Sayed, D.; El-Saftawy, A.A.; Abd El Aal, S.A.; Fayez-Hassan, M.; Al-Abyad, M.; Mansour, N.A.; Seddik, U.

    2017-01-01

    Understanding the nature of polymers used as nuclear detectors is crucial to enhance their behaviors. In this work, the induced modifications in wettability and etching properties of Hostaphan and Makrofol polymers irradiated by different fluences of thermal neutrons are investigated. The wetting properties are studied by contact angle technique which showed the spread out of various liquids over the irradiated polymers surfaces (wettability enhanced). This wetting behavior is attributed to the induced changes in surface free energy (SFE), morphology, roughness, structure, hardness, and chemistry. SFE values are calculated by three different models and found to increase after neutrons irradiation associated with differences depending on the used model. These differences result from the intermolecular interactions in the liquid/polymer system. Surface morphology and roughness of both polymers showed drastic changes after irradiation. Additionally, surface structure and hardness of pristine and irradiated polymers were discussed and correlated to the surface wettability improvements. The changes in surface chemistry are examined by Fourier transform infrared spectroscopy (FTIR), which indicate an increase in surface polarity due to the formation of polar groups. The irradiated polymers etching characteristics and activation energies are discussed as well. Lastly, it is evident that thermal neutrons show efficiency in improving surface wettability and etching properties of Hostaphan and Makrofol in a controlled way. - Highlights: • Neutrons radiation used to modify Hostaphan and Makrofol polymer wetting behavior. • Tailoring surface structure, topography and chemistry control its wettability. • Bulk etching rate and activation energy improved after neutrons irradiation.

  19. Effect of Subliminal Stimulation of Symbiotic Fantasies on Behavior Modification Treatment of Obesity.

    Science.gov (United States)

    And Others; Silverman, Lloyd H.

    1978-01-01

    Obese women were treated in behavior modification programs for overeating. Behavior programs were accompanied by subliminal stimulation and by symbiotic and control messages. The symbiotic condition gave evidence of enhancing weight loss. This finding supports the proposition that subliminal stimulation of symbiotic fantasies can enhance the…

  20. Maternal Behavior Modifications during Pretense and Their Long-Term Effects on Toddlers' Understanding of Pretense

    Science.gov (United States)

    Nakamichi, Naoko

    2015-01-01

    Recent studies indicate the need to investigate the sources of toddlers' understanding of another person's pretense. The present study is a cultural and longitudinal extension of the work of Lillard and Witherington (2004), who claimed that mothers modify their behaviors during pretense and that the some of these behavior modifications help their…

  1. A Secure Behavior Modification Sensor System for Physical Activity Improvement

    Science.gov (United States)

    Price, Alan

    2011-01-01

    Today, advances in wireless sensor networks are making it possible to capture large amounts of information about a person and their interaction within their home environment. However, what is missing is how to ensure the security of the collected data and its use to alter human behavior for positive benefit. In this research, exploration was…

  2. MODIFICATION OF SEA ANEMONE BEHAVIOR BY SYMBIOTIC ZOOXANTHELLAE: PHOTOTAXIS.

    Science.gov (United States)

    Pearse, Vicki Buchsbaum

    1974-12-01

    The sea anemone Anthopleura elegantissima, with and without endosymbiotic zooxanthellae, was tested for evidence of phototactic behavior. Anemones with zooxanthellae always displayed phototaxis, either positive or negative depending on the experimental light intensity and the light intensity of the habitat from which the animals were taken. Anemones without zooxanthellae-even those that had previously harbored zooxanthellae and that were genetically identical clone-mates of phototactic individuals-never displayed phototaxis, appearing completely indifferent to light and shade. The results indicate that phototaxis in this sea anemone depends directly on the presence of its symbiotic algae. It is suggested that the flexible phototactic behavior of the anemone may play an important role in favorably regulating the amount of light to which the zooxanthellae are exposed.

  3. PREVIEW behavior modification intervention toolbox (PREMIT: a study protocol for a psychological element of a multicenter project

    Directory of Open Access Journals (Sweden)

    Daniela Kahlert

    2016-08-01

    Full Text Available Background: Losing excess body weight and preventing weight regain by changing lifestyle is a challenging but promising task to prevent the incidence of type-2 diabetes. To be successful, it is necessary to use evidence-based and theory-driven interventions, which also contribute to the science of behavior modification by providing a deeper understanding of successful intervention components. Objective: To develop a physical activity and dietary behavior modification intervention toolbox (PREMIT that fulfills current requirements of being theory-driven and evidence-based, comprehensively described and feasible to evaluate. PREMIT is part of an intervention trial, which aims to prevent the onset of type-2 diabetes in pre-diabetics in eight clinical centers across the world by guiding them in changing their physical activity and dietary behavior through a group counselling approach. Methods: The program development took five progressive steps, in line with the Public Health Action Cycle: (1 Summing-up the intervention goal(s, target group and the setting, (2 uncovering the generative psychological mechanisms, (3 identifying behavior change techniques and tools, (4 preparing for evaluation and (5 implementing the intervention and assuring quality. Results: PREMIT is based on a trans-theoretical approach referring to valid behavior modification theories, models and approaches. A major ‘product’ of PREMIT is a matrix, constructed for use by onsite-instructors. The matrix includes objectives, tasks and activities ordered by periods. PREMIT is constructed to help instructors guide participant’s behavior change. To ensure high fidelity and adherence of program-implementation across the eight intervention centers standardized operational procedures were defined and train-the-trainer workshops were held. In summary PREMIT is a theory-driven, evidence-based program carefully developed to change physical activity and dietary behaviors in pre

  4. PREVIEW Behavior Modification Intervention Toolbox (PREMIT): A Study Protocol for a Psychological Element of a Multicenter Project.

    Science.gov (United States)

    Kahlert, Daniela; Unyi-Reicherz, Annelie; Stratton, Gareth; Meinert Larsen, Thomas; Fogelholm, Mikael; Raben, Anne; Schlicht, Wolfgang

    2016-01-01

    Losing excess body weight and preventing weight regain by changing lifestyle is a challenging but promising task to prevent the incidence of type-2 diabetes. To be successful, it is necessary to use evidence-based and theory-driven interventions, which also contribute to the science of behavior modification by providing a deeper understanding of successful intervention components. To develop a physical activity and dietary behavior modification intervention toolbox (PREMIT) that fulfills current requirements of being theory-driven and evidence-based, comprehensively described and feasible to evaluate. PREMIT is part of an intervention trial, which aims to prevent the onset of type-2 diabetes in pre-diabetics in eight clinical centers across the world by guiding them in changing their physical activity and dietary behavior through a group counseling approach. The program development took five progressive steps, in line with the Public Health Action Cycle: (1) Summing-up the intervention goal(s), target group and the setting, (2) uncovering the generative psychological mechanisms, (3) identifying behavior change techniques and tools, (4) preparing for evaluation and (5) implementing the intervention and assuring quality. PREMIT is based on a trans-theoretical approach referring to valid behavior modification theories, models and approaches. A major "product" of PREMIT is a matrix, constructed for use by onsite-instructors. The matrix includes objectives, tasks and activities ordered by periods. PREMIT is constructed to help instructors guide participants' behavior change. To ensure high fidelity and adherence of program-implementation across the eight intervention centers standardized operational procedures were defined and "train-the-trainer" workshops were held. In summary PREMIT is a theory-driven, evidence-based program carefully developed to change physical activity and dietary behaviors in pre-diabetic people.

  5. Microstructural evolution and surface properties of nanostructured Cu-based alloy by ultrasonic nanocrystalline surface modification technique

    Energy Technology Data Exchange (ETDEWEB)

    Amanov, Auezhan, E-mail: amanov_a@yahoo.com [Department of Mechanical Engineering, Sun Moon University, Asan 336-708 (Korea, Republic of); Cho, In-Sik [R& D Group, Mbrosia Co., Ltd., Asan 336-708 (Korea, Republic of); Pyun, Young-Sik [Department of Mechanical Engineering, Sun Moon University, Asan 336-708 (Korea, Republic of)

    2016-12-01

    Graphical abstract: - Highlights: • A nanostructured surface was produced by UNSM technique. • Porosities were eliminated from the surface by UNSM technique. • Extremely high hardness obtained at the top surface after UNSM treatment. • Friction and wear behavior was improved by UNSM technique. • Resistance to scratch behavior was improved by UNSM technique. - Abstract: A nanostructured surface layer with a thickness of about 180 μm was successfully produced in Cu-based alloy using an ultrasonic nanocrystalline surface modification (UNSM) technique. Cu-based alloy was sintered onto low carbon steel using a powder metallurgy (P/M) method. Transmission electron microscope (TEM) characterization revealed that the severe plastic deformation introduced by UNSM technique resulted in nano-sized grains in the topmost surface layer and deformation twins. It was also found by atomic force microscope (AFM) observations that the UNSM technique provides a significant reduction in number of interconnected pores. The effectiveness of nanostructured surface layer on the tribological and micro-scratch properties of Cu-based alloy specimens was investigated using a ball-on-disk tribometer and micro-scratch tester, respectively. Results exhibited that the UNSM-treated specimen led to an improvement in tribological and micro-scratch properties compared to that of the sintered specimen, which may be attributed to the presence of nanostructured surface layer having an increase in surface hardness and reduction in surface roughness. The findings from this study are expected to be implemented to the automotive industry, in particular connected rod bearings and bushings in order to increase the efficiency and performance of internal combustion engines (ICEs).

  6. Synthesis, crystallization behavior and surface modification of Ni-Cr-Si-Fe amorphous alloy

    International Nuclear Information System (INIS)

    Iqbal, M.; Akhter, J.I.; Rajput, M.U.; Mahmood, K.; Hussain, Z.; Hussain, S.; Rafiq, M.

    2011-01-01

    A quaternary Ni/sub 86/Cr/sub 7/Si/sub 4/Fe/sub 3/ amorphous alloy was synthesized by melt spinning technique. Surface modification was done by electron beam melting (EBM), neutron irradiation and gamma-rays. Microstructure of as cast, annealed and modified samples was examined by scanning electron microscope. Crystallization behavior was studied by annealing the samples in vacuum at different temperatures in the range 773-1073 K. Techniques of X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used for characterization. Differential scanning calorimetry (DSC) was conducted at various heating rates in the range 10-40 K/min. Thermal parameters like glass transition temperature T/sub g/, crystallization temperature T/sub x/, supercooled liquid region delta T/sub x/ and reduced glass transition temperature T/sub rg/ were measured. The Ni/sub 86/Cr/sub 7/Si/sub 4/Fe/sub 3/ alloy exhibits wide supercooled liquid region of 60 K indicating good thermal stability. The activation energy was calculated to be 160 +- 4 kJ/mol using Kissinger and Ozawa equations respectively which indicates high resistance against crystallization. The XRD results of the samples annealed at 773 K, 923 K, 973 K and 1073 K/20 min show nucleation of Ni/sub 2/Cr/sub 3/ and NiCrFe crystalline phases. Vickers microhardness of the as cast ribbon was measured to be 680. About 30-50 % increase in hardness was achieved by applying EBM technique. (author)

  7. On the Value of Nonremovable Reminders for Behavior Modification: An Application to Nail-Biting (Onychophagia)

    Science.gov (United States)

    Koritzky, Gilly; Yechiam, Eldad

    2011-01-01

    The authors examined the effectiveness of a novel behavior modification method for dysfunctional and impulsive habits, based on nonremovable reminders (NrRs). NrRs were implemented by having participants wear nonremovable wristbands designated to constantly remind them of their resolution to quit the targeted habit (nail-biting). Participants were…

  8. Behavior Modification for Persons with Developmental Disabilities: Treatments and Supports. Volume I

    Science.gov (United States)

    Matson, Johnny L., Ed.; Laud, Rinita B., Ed.; Matson, Michael L., Ed.

    2004-01-01

    In the last few decades, the field of dual diagnosis as applied to those with intellectual disabilities has boasted a monumental surge in assessment devices and treatment approaches. These relatively recent advances include those in the development of behavior modification principles and procedures that have had a dramatic impact on services for…

  9. Minimal Nasolabial Incision Technique for Nasolabial Fold Modification in Patients With Facial Paralysis.

    Science.gov (United States)

    Faris, Callum; Heiser, Alyssa; Jowett, Nate; Hadlock, Tessa

    2018-03-01

    Creation of symmetrical nasolabial folds (NLFs) is important in the management of the paralyzed face. Established techniques use a linear incision in the NLF, and technical refinements now allow the linear incision to be omitted. This retrospective case series was conducted in a tertiary care setting from February 2, 2017, to June 7, 2017. Participants were all patients (N = 21) with peripheral facial paralysis who underwent NLF modification that used the minimal nasolabial incision technique at the Massachusetts Eye and Ear Infirmary Facial Nerve Center from February 1, 2015, through August 31, 2016. Patient-reported outcome measures using the validated, quality-of-life Facial Clinimetric Evaluation (FaCE) Scale; clinician-reported facial function outcomes using a validated electronic clinician-graded facial paralysis assessment (eFACE); layperson assessment of the overall aesthetic outcome of the NLF; and expert-clinician scar assessment of the NLF. Of the 21 patients who underwent NLF modification that used the minimal nasolabial incision technique, 9 patients (43%) were female and 12 (57%) were male. The mean age was 41 (range, 9-90) years; 17 patients (81%) were adults (≥18 years) and 4 (19%) were children (<18 years). Overall, significant improvements were observed after NLF modification in all outcome measures as graded by both clinicians and patients. The mean (SD) scores for total eFACE were 60.7 (14.9) before the operation and 77.2 (8.9) after the operation (mean difference, 16.5 [95% CI, 8.5-24.2]; P < .001). The mean (SD) static eFACE scores were 61.4 (20.6) before the operation and 82.7 (12.4) after the operation (mean difference, 21.3 [95% CI, 10.7-31.9]; P < .001). The mean (SD) FaCE quality-of-life scores were 51.3 (20.1) before the operation and 70.3 (12.6) after the operation (mean difference, 19.0 [95% CI, 6.5-31.6]; P  =  .001). The layperson self-assessment of the overall aesthetic outcome of the NLF modification was

  10. Rotary bending fatigue properties of Inconel 718 alloys by ultrasonic nanocrystal surface modification technique

    Directory of Open Access Journals (Sweden)

    Jun-Hyong Kim

    2015-08-01

    Full Text Available This study investigates the influence of ultrasonic nanocrystal surface modification (UNSM technique on fatigue properties of SAE AMS 5662 (solution treatment of Inconel 718 alloys. The fatigue properties of the specimens were investigated using a rotary bending fatigue tester. Results revealed that the UNSM-treated specimens showed longer fatigue life in comparison with those of the untreated specimens. The improvement in fatigue life of the UNSM-treated specimens is attributed mainly to the induced compressive residual stress, increased hardness, reduced roughness and refined grains at the top surface. Fractured surfaces were analysed using a scanning electron microscopy (SEM in order to give insight into the effectiveness of UNSM technique on fracture mechanisms and fatigue life.

  11. Application of a system modification technique to dynamic tuning of a spinning rotor blade

    Science.gov (United States)

    Spain, C. V.

    1987-01-01

    An important consideration in the development of modern helicopters is the vibratory response of the main rotor blade. One way to minimize vibration levels is to ensure that natural frequencies of the spinning main rotor blade are well removed from integer multiples of the rotor speed. A technique for dynamically tuning a finite-element model of a rotor blade to accomplish that end is demonstrated. A brief overview is given of the general purpose finite element system known as Engineering Analysis Language (EAL) which was used in this work. A description of the EAL System Modification (SM) processor is then given along with an explanation of special algorithms developed to be used in conjunction with SM. Finally, this technique is demonstrated by dynamically tuning a model of an advanced composite rotor blade.

  12. Knowledge of Parents of Children with Autism Spectrum Disorder of Behavior Modification Methods and Their Training Needs Accordingly

    Science.gov (United States)

    Deeb, Raid Mousa Al-Shaik

    2016-01-01

    The study aimed at identifying knowledge of parents of children with autism spectrum disorder of behavior modification methods and their training needs accordingly. The sample of the study consisted of (98) parents in Jordan. A scale of behavior modification methods was constructed, and then validated. The results of the study showed that the…

  13. Analysis and modification of blue sapphires from Rwanda by ion beam techniques

    Science.gov (United States)

    Bootkul, D.; Chaiwai, C.; Tippawan, U.; Wanthanachaisaeng, B.; Intarasiri, S.

    2015-12-01

    Blue sapphire is categorised in a corundum (Al2O3) group. The gems of this group are always amazed by their beauties and thus having high value. In this study, blue sapphires from Rwanda, recently came to Thai gemstone industry, are chosen for investigations. On one hand, we have applied Particle Induced X-ray Emission (PIXE), which is a highly sensitive and precise analytical technique that can be used to identify and quantify trace elements, for chemical analysis of the sapphires. Here we have found that the major element of blue sapphires from Rwanda is Al with trace elements such as Fe, Ti, Cr, Ga and Mg as are commonly found in normal blue sapphire. On the other hand, we have applied low and medium ion implantations for color improvement of the sapphire. It seems that a high amount of energy transferring during cascade collisions have altered the gems properties. We have clearly seen that the blue color of the sapphires have been intensified after nitrogen ion bombardment. In addition, the gems were also having more transparent and luster. The UV-Vis-NIR measurement detected the modification of their absorption properties, implying of the blue color increasing. Here the mechanism of these modifications is postulated and reported. In any point of view, the bombardment by using nitrogen ion beam is a promising technique for quality improvement of the blue sapphire from Rwanda.

  14. Behavioral technique for workflow abstraction and matching

    NARCIS (Netherlands)

    Klai, K.; Ould Ahmed M'bareck, N.; Tata, S.; Dustdar, S.; Fiadeiro, J.L.; Sheth, A.

    2006-01-01

    This work is in line with the CoopFlow approach dedicated for workflow advertisement, interconnection, and cooperation in virtual organizations. In order to advertise workflows into a registry, we present in this paper a novel method to abstract behaviors of workflows into symbolic observation

  15. Biofouling behavior and performance of forward osmosis membranes with bioinspired surface modification in osmotic membrane bioreactor.

    Science.gov (United States)

    Li, Fang; Cheng, Qianxun; Tian, Qing; Yang, Bo; Chen, Qianyuan

    2016-07-01

    Forward osmosis (FO) has received considerable interest for water and energy related applications in recent years. Biofouling behavior and performance of cellulose triacetate (CTA) forward osmosis membranes with bioinspired surface modification via polydopamine (PD) coating and poly (ethylene glycol) (PEG) grafting (PD-g-PEG) in a submerged osmotic membrane bioreactor (OMBR) were investigated in this work. The modified membranes exhibited lower flux decline than the pristine one in OMBR, confirming that the bioinspired surface modification improved the antifouling ability of the CTA FO membrane. The result showed that the decline of membrane flux related to the increase of the salinity and MLSS concentration of the mixed liquid. It was concluded that the antifouling ability of modified membranes ascribed to the change of surface morphology in addition to the improvement of membrane hydrophilicity. The bioinspired surface modifications might improve the anti-adhesion for the biopolymers and biocake. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Anodization: a promising nano-modification technique of titanium implants for orthopedic applications.

    Science.gov (United States)

    Yao, Chang; Webster, Thomas J

    2006-01-01

    Anodization is a well-established surface modification technique that produces protective oxide layers on valve metals such as titanium. Many studies have used anodization to produce micro-porous titanium oxide films on implant surfaces for orthopedic applications. An additional hydrothermal treatment has also been used in conjunction with anodization to deposit hydroxyapatite on titanium surfaces; this is in contrast to using traditional plasma spray deposition techniques. Recently, the ability to create nanometer surface structures (e.g., nano-tubular) via anodization of titanium implants in fluorine solutions have intrigued investigators to fabricate nano-scale surface features that mimic the natural bone environment. This paper will present an overview of anodization techniques used to produce micro-porous titanium oxide structures and nano-tubular oxide structures, subsequent properties of these anodized titanium surfaces, and ultimately their in vitro as well as in vivo biological responses pertinent for orthopedic applications. Lastly, this review will emphasize why anodized titanium structures that have nanometer surface features enhance bone forming cell functions.

  17. Analysis and modification of blue sapphires from Rwanda by ion beam techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bootkul, D., E-mail: mo_duangkhae@hotmail.com [Department of General Science - Gems & Jewelry, Faculty of Science, Srinakharinwirot University, Bangkok 10110 (Thailand); Chaiwai, C.; Tippawan, U. [Plasma and Beam Physics Research Facility, Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Wanthanachaisaeng, B. [Gems Enhancement Research Unit, Faculty of Gems, Burapha University, Chanthaburi Campus, Chanthaburi 22170 (Thailand); Intarasiri, S., E-mail: saweat@gmail.com [Science and Technology Research Institute, Chiang Mai University, Chiang Mai 50200 (Thailand)

    2015-12-15

    Highlights: • Ion beam analysis is an effective method for detecting trace elements. • Ion beam treatment is able to improve optical and color appearances of the blue sapphire from Rwanda. • These alternative methods can be extended to jewelry industry for large scale application. - Abstract: Blue sapphire is categorised in a corundum (Al{sub 2}O{sub 3}) group. The gems of this group are always amazed by their beauties and thus having high value. In this study, blue sapphires from Rwanda, recently came to Thai gemstone industry, are chosen for investigations. On one hand, we have applied Particle Induced X-ray Emission (PIXE), which is a highly sensitive and precise analytical technique that can be used to identify and quantify trace elements, for chemical analysis of the sapphires. Here we have found that the major element of blue sapphires from Rwanda is Al with trace elements such as Fe, Ti, Cr, Ga and Mg as are commonly found in normal blue sapphire. On the other hand, we have applied low and medium ion implantations for color improvement of the sapphire. It seems that a high amount of energy transferring during cascade collisions have altered the gems properties. We have clearly seen that the blue color of the sapphires have been intensified after nitrogen ion bombardment. In addition, the gems were also having more transparent and luster. The UV–Vis–NIR measurement detected the modification of their absorption properties, implying of the blue color increasing. Here the mechanism of these modifications is postulated and reported. In any point of view, the bombardment by using nitrogen ion beam is a promising technique for quality improvement of the blue sapphire from Rwanda.

  18. Analysis and modification of blue sapphires from Rwanda by ion beam techniques

    International Nuclear Information System (INIS)

    Bootkul, D.; Chaiwai, C.; Tippawan, U.; Wanthanachaisaeng, B.; Intarasiri, S.

    2015-01-01

    Highlights: • Ion beam analysis is an effective method for detecting trace elements. • Ion beam treatment is able to improve optical and color appearances of the blue sapphire from Rwanda. • These alternative methods can be extended to jewelry industry for large scale application. - Abstract: Blue sapphire is categorised in a corundum (Al_2O_3) group. The gems of this group are always amazed by their beauties and thus having high value. In this study, blue sapphires from Rwanda, recently came to Thai gemstone industry, are chosen for investigations. On one hand, we have applied Particle Induced X-ray Emission (PIXE), which is a highly sensitive and precise analytical technique that can be used to identify and quantify trace elements, for chemical analysis of the sapphires. Here we have found that the major element of blue sapphires from Rwanda is Al with trace elements such as Fe, Ti, Cr, Ga and Mg as are commonly found in normal blue sapphire. On the other hand, we have applied low and medium ion implantations for color improvement of the sapphire. It seems that a high amount of energy transferring during cascade collisions have altered the gems properties. We have clearly seen that the blue color of the sapphires have been intensified after nitrogen ion bombardment. In addition, the gems were also having more transparent and luster. The UV–Vis–NIR measurement detected the modification of their absorption properties, implying of the blue color increasing. Here the mechanism of these modifications is postulated and reported. In any point of view, the bombardment by using nitrogen ion beam is a promising technique for quality improvement of the blue sapphire from Rwanda.

  19. The development of human behavior analysis techniques

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Lee, Yong Hee; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon; Oh, In Suk; Lee, Hyun Chul; Park, Jae Chang.

    1997-07-01

    In this project, which is to study on man-machine interaction in Korean nuclear power plants, we developed SACOM (Simulation Analyzer with a Cognitive Operator Model), a tool for the assessment of task performance in the control rooms using software simulation, and also develop human error analysis and application techniques. SACOM was developed to assess operator's physical workload, workload in information navigation at VDU workstations, and cognitive workload in procedural tasks. We developed trip analysis system including a procedure based on man-machine interaction analysis system including a procedure based on man-machine interaction analysis and a classification system. We analyzed a total of 277 trips occurred from 1978 to 1994 to produce trip summary information, and for 79 cases induced by human errors time-lined man-machine interactions. The INSTEC, a database system of our analysis results, was developed. The MARSTEC, a multimedia authoring and representation system for trip information, was also developed, and techniques for human error detection in human factors experiments were established. (author). 121 refs., 38 tabs., 52 figs

  20. The development of human behavior analysis techniques

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Lee, Yong Hee; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon; Oh, In Suk; Lee, Hyun Chul; Park, Jae Chang

    1997-07-01

    In this project, which is to study on man-machine interaction in Korean nuclear power plants, we developed SACOM (Simulation Analyzer with a Cognitive Operator Model), a tool for the assessment of task performance in the control rooms using software simulation, and also develop human error analysis and application techniques. SACOM was developed to assess operator`s physical workload, workload in information navigation at VDU workstations, and cognitive workload in procedural tasks. We developed trip analysis system including a procedure based on man-machine interaction analysis system including a procedure based on man-machine interaction analysis and a classification system. We analyzed a total of 277 trips occurred from 1978 to 1994 to produce trip summary information, and for 79 cases induced by human errors time-lined man-machine interactions. The INSTEC, a database system of our analysis results, was developed. The MARSTEC, a multimedia authoring and representation system for trip information, was also developed, and techniques for human error detection in human factors experiments were established. (author). 121 refs., 38 tabs., 52 figs.

  1. Designing the user interfaces of a behavior modification intervention for obesity & eating disorders prevention.

    Science.gov (United States)

    Moulos, Ioannis; Maramis, Christos; Mourouzis, Alexandros; Maglaveras, Nicos

    2015-01-01

    The recent immense diffusion of smartphones has significantly upgraded the role of mobile user interfaces in interventions that build and/or maintain healthier lifestyles. Indeed, high-quality, user-centered smartphone applications are able to serve as advanced front-ends to such interventions. These smartphone applications, coupled with portable or wearable sensors, are being employed for monitoring day to day health-related behaviors, including eating and physical activity. Some of them take one step forward by identifying unhealthy behaviors and contributing towards their modification. This work presents the design as well as the preliminary implementation of the mobile user interface of SPLENDID, a novel, sensor-oriented intervention for preventing obesity and eating disorders in young populations. This is implemented by means of an Android application, which is able to monitor the eating and physical activity behaviors of young individuals at risk for obesity and/or eating disorders, subsequently guiding them towards the modification of those behaviors that put them at risk. Behavior monitoring is based on multiple data provided by a set of communicating sensors and self-reported information, while guidance is facilitated through a feedback/encouragement provision and goal setting mechanism.

  2. Improving Mealtime Behaviors of a Multihandicapped Child Using Behavior Therapy Techniques.

    Science.gov (United States)

    Sisson, L. A.; Dixon, M. J.

    1986-01-01

    Inappropriate mealtime behaviors of a blind, mentally retarded, behaviorally disordered 10-year-old were modified via behavior therapy techniques, including audiotape of favorite stories turned off during inappropriate behavior and praise (plus access to food) for appropriate napkin and utensil use, once desired sitting posture had been…

  3. Enhanced surface functionality via plasma modification and plasma deposition techniques to create more biologically relevant materials

    Science.gov (United States)

    Shearer, Jeffrey C.

    Functionalizing nanoparticles and other unusually shaped substrates to create more biologically relevant materials has become central to a wide range of research programs. One of the primary challenges in this field is creating highly functionalized surfaces without modifying the underlying bulk material. Traditional wet chemistry techniques utilize thin film depositions to functionalize nanomaterials with oxygen and nitrogen containing functional groups, such as --OH and --NHx. These functional groups can serve to create surfaces that are amenable to cell adhesion or can act as reactive groups for further attachment of larger structures, such as macromolecules or antiviral agents. Additional layers, such as SiO2, are often added between the nanomaterial and the functionalized coating to act as a barrier films, adhesion layers, and to increase overall hydrophilicity. However, some wet chemistry techniques can damage the bulk material during processing. This dissertation examines the use of plasma processing as an alternative method for producing these highly functionalized surfaces on nanoparticles and polymeric scaffolds through the use of plasma modification and plasma enhanced chemical vapor deposition techniques. Specifically, this dissertation will focus on (1) plasma deposition of SiO2 barrier films on nanoparticle substrates; (2) surface functionalization of amine and alcohol groups through (a) plasma co-polymerization and (b) plasma modification; and (3) the design and construction of plasma hardware to facilitate plasma processing of nanoparticles and polymeric scaffolds. The body of work presented herein first examines the fabrication of composite nanoparticles by plasma processing. SiOxC y and hexylamine films were coated onto TiO2 nanoparticles to demonstrate enhanced water dispersion properties. Continuous wave and pulsed allyl alcohol plasmas were used to produce highly functionalized Fe2 O3 supported nanoparticles. Specifically, film composition was

  4. Modification of the gasless fetoscopy technique for the treatment of large myelomeningocele: a study in sheep

    Directory of Open Access Journals (Sweden)

    Denise Araujo Lapa Pedreira

    2010-03-01

    Full Text Available Objective: To change the gasless fetoscopy technique in order to reduce the diameter of entry orifices in the myometrium. Methods: Seven pregnant ewes were submitted to fetoscopy for repairing a large skin defect measuring 4.0 x 3.0 cm, created in the fetal lumbar region at the gestational age of 100 days. The defect was repaired through continuous suture of the skin with approximation of borders. Gasless fetoscopy was used for performing the suture with three orifices to allow entry of the trocar into the myometrium. A 5.0-mm optical trocar, and 3.5-mm grasping, dissecting and suturing forceps were used. After surgery, pregnancy was maintained until the animals were euthanized on the 133rd day of gestation, and the fetuses were evaluated. Results: Seven pregnant ewes underwent surgery; the first two cases were characterized as the Pilot Group, in which the endoscopic technique was modified and caliber reduction was possible in two out of three entry orifices in the myometrium. In the five remaining cases (Study Group, the repair was successfully carried out in all the fetuses, and the mean duration of fetoscopy was 98 minutes. There was a case of maternal death attributed to intrauterine infection. Mean intrauterine permanence after surgery was 12 days. Conclusions: The technique was successfully modified, allowing reduction of the uterine orifices necessary to perform the repair of a skin defect in the fetal lumbar region through a new fetoscopy technique. The impact of this modification in repair of myelomeningocele in human fetuses should be studied.

  5. Effects of Methylphenidate and Behavior Modification on the Social and Academic Behavior of Children with Disruptive Behavior Disorders: The Moderating Role of Callous/Unemotional Traits

    Science.gov (United States)

    Waschbusch, Daniel A.; Carrey, Normand J.; Willoughby, Michael T.; King, Sara; Andrade, Brendan F.

    2007-01-01

    This study examined whether response to behavior modification with and without methylphenidate differed for children with attention-deficit/hyperactivity disorder (ADHD) and conduct problems (CP) depending on the presence of callous/unemotional (CU) traits. Participants were 37 children ages 7 to 12, including 19 with ADHD/CP-only and 18 with…

  6. Helping Individuals with Sleep Disturbances: Some Behavior Therapy Techniques.

    Science.gov (United States)

    Alley, Patricia M.

    1983-01-01

    Describes a range of behavior therapy techniques for treating sleep disturbances, including physical activity, relaxation training, biofeedback, autogenic training, and cognitive techniques. The importance of understanding the client's background is emphasized. Restoring the client's self-control and positive psychological growth are stressed.…

  7. The influence of a behavior modification interventional program on body mass index in obese adolescents.

    Science.gov (United States)

    Toulabi, Tahereh; Khosh Niyat Nikoo, Mohsen; Amini, Fariba; Nazari, Hedayat; Mardani, Mahnaz

    2012-03-01

    The prevalence of obesity and overweight among children and adolescents is increasing rapidly. The present research was performed to determine the influence of a ''behavior modification'' program on body mass index (BMI) in obese public high school students in Iran. In this study, 152 adolescence and their parents were selected from 12 high schools of Khorram Abad from 2004 to 2006, and they were randomly assigned to either the intervention or the control groups. The "behavior modification" interventional program consisted of nutritional education, modifying dietary habits, teaching exercise programs, teaching nutritional facts to the parents, and performing exercises 3 days a week. The height and weight as well as waist, hip, and wrist circumferences of the participants were measured before and after implementing the interventional program. BMI and waist to hip ratio (WHR) were calculated. The adolescents and parents completed a nutrition knowledge questionnaire. Adolescents also completed the Beck's Depression Questionnaire. Adolescent's mean weight, BMI, and waist and hip circumferences decreased significantly after implementing the interventional program, in the intervention group (p≤0.001). In addition, the students' and parents' nutrition knowledge increased in the intervention group after implementing the interventional program (pbehavior modification'' interventional program is effective in reducing BMI in obese students, and therefore, school principals and planners can play an important role in controlling obesity by implementing this program via the students, their parents, and the school staff. Copyright © 2012. Published by Elsevier B.V.

  8. [Review of the approach to exercise behavior modification from the viewpoint of preventive medicine].

    Science.gov (United States)

    Nomura, Takuo; Kouta, Munetsugu; Shigemori, Kenta; Yoshimoto, Yoshinobu; Sato, Atsushi

    2008-05-01

    The purpose of this study was to summarize the approaches to behavior modification for exercise from the viewpoint of preventive medicine. Articles were searched according to the particular field of preventive medicine, i.e., primary prevention, secondary prevention, tertiary prevention, and other fields of prevention. In the field of primary prevention for elderly people living at home, many fall prevention programs were found to have been carried out. In these studies, various programs were found to be effective if the exercise proved to be sufficient. Although some approaches were observed to be based on the productive aging theory and social capital, the number of such studies was small. In the field of secondary prevention, illness and functional disorders are prevented from becoming worse. It is therefore important for each individual to exercise by himself/herself and also acquire sufficient self-monitoring skills. Social capital is useful for learning good exercise habits. In the field of tertiary prevention, although exercise therapy is effective for improving physical functions and preventing disease recurrence in patients with chronic disease, some patients nevertheless find it difficult to continue such an exercise therapy. The approaches to behavior modification were extremely effective for patients with chronic disease. In other fields of preventive medicine, daily exercises such stair climbing are effective methods for reducing the risk of chronic disease and such a behavior modification may lead to a considerable public health gain. In the future, further studies with a many lines of evidence should be performed, and approaches based on behavioral science should be established.

  9. Influence of nitriding atmosphere on the modification of surface titanium with focus on the behavior of blood platelets adhesion

    International Nuclear Information System (INIS)

    Vitoriano, J.O.; Alves, C.; Braz, D.C.; Camara, R.B.G.; Rocha, H.A.O.

    2014-01-01

    The present study aimed to analyze the influence of surface modification of titanium on the adhesion of blood platelets, through techniques of adhesion and morphological analyzes. Discs of titanium grade II received different surface treatments with plasma of Ar + N_2 + H_2 and Ar + H_2, forming two experimental groups including only polished samples used as standard. Before and after treatment the samples were characterized according to topography, crystalline structure and wettability, using atomic force microscopy, X-ray diffraction, Raman spectroscopy and testing of sessile drop, respectively. Platelet rich plasma (PRP) was applied on the modified surfaces in a culture plates. Images obtained by electron microscopy of adhered platelets were analyzed to verify the behavior of platelets in the different experimental conditions. (author)

  10. A Digital Framework to Support Providers and Patients in Diabetes Related Behavior Modification.

    Science.gov (United States)

    Abidi, Samina; Vallis, Michael; Piccinini-Vallis, Helena; Imran, Syed Ali; Abidi, Syed Sibte Raza

    2017-01-01

    We present Diabetes Web-Centric Information and Support Environment (D-WISE) that features: (a) Decision support tool to assist family physicians to administer Behavior Modification (BM) strategies to patients; and (b) Patient BM application that offers BM strategies and motivational interventions to engage patients. We take a knowledge management approach, using semantic web technologies, to model the social cognition theory constructs, Canadian diabetes guidelines and BM protocols used locally, in terms of a BM ontology that drives the BM decision support to physicians and BM strategy adherence monitoring and messaging to patients. We present the qualitative analysis of D-WISE usability by both physicians and patients.

  11. Effectiveness of Cognitive Behavioral Therapy Techniques on Anxiety and Depression in Cancer Patients

    Directory of Open Access Journals (Sweden)

    Cem Soylu

    2015-04-01

    Full Text Available Depression and anxiety are generally considered to be the most important psychopathological comorbidities of cancer patients and experienced by approximately one-third of cancer patients. In the literature, studies have reported that patient characteristics such as gender, age, education level and disease characteristics such as recurrence, stage of cancer and metestazis are associated with anxiety and depression among cancer patients. Cognitive Behavioral Therapy (CBT and techniques are one of the most frequently used approach in studying the effects of psychological intervention on anxiety and depression in cancer patients and its value has been demonstrated in reducing distress with diverse cancer populations. The aim of cognitive-behavioral interventions is to change particular thoughts and behaviors and teach specific coping skills, such as cognitive restructuring, behavior modification, relaxation training and activity plan by using specific techniques. Cognitive restructing, stress management and desensitization, relaxation and activity scheduling with use of diary sheet are most used among CBT techniques. This review summarizes the diagnosis, prevalence, risk factors and treatment of depression and anxiety in patients with cancer and CBT techniques applied to these symptoms and study findings related to treatment. [JCBPR 2015; 4(1.000: 54-63

  12. Preparation, Modification, Characterization, and Biosensing Application of Nanoporous Gold Using Electrochemical Techniques.

    Science.gov (United States)

    Bhattarai, Jay K; Neupane, Dharmendra; Nepal, Bishal; Mikhaylov, Vasilii; Demchenko, Alexei V; Stine, Keith J

    2018-03-16

    Nanoporous gold (np-Au), because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning pore and ligament sizes. The np-Au electrodes that are prepared using electrochemical techniques are robust and are easier to handle for their use in electrochemical biosensing. Here, we review different electrochemical strategies for the preparation, post-modification, and characterization of np-Au along with the synergistic use of both electrochemistry and np-Au for applications in biosensing.

  13. Preparation, Modification, Characterization, and Biosensing Application of Nanoporous Gold Using Electrochemical Techniques

    Directory of Open Access Journals (Sweden)

    Jay K. Bhattarai

    2018-03-01

    Full Text Available Nanoporous gold (np-Au, because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning pore and ligament sizes. The np-Au electrodes that are prepared using electrochemical techniques are robust and are easier to handle for their use in electrochemical biosensing. Here, we review different electrochemical strategies for the preparation, post-modification, and characterization of np-Au along with the synergistic use of both electrochemistry and np-Au for applications in biosensing.

  14. Evaluation of electrode surface modification techniques for the development of chemical sensors

    International Nuclear Information System (INIS)

    Galiatsatos, C.

    1988-01-01

    This thesis covers several aspects of electrode surface modification techniques. The successful application of gamma-radiation to create polymer-coated electrodes, where the polymers can be ion exchangers and consequently of great analytical interest by themselves (such as the polymer poly(diallyl) dimethyl ammonium chloride) or where some other neutral polymers can function as convenient matrices for the introduction of biomolecules and/or other electrochemically interesting species is reported. This is demonstrated by using the neutral polymer poly(vinyl alcohol) (PVAL) as a matrix for immobilization of the enzyme glucose oxidase and the mediator methyl viologen. The effect of γ-radiation on PVAL is discussed, as well as swelling properties of the irradiated polymers and specific characteristics of the created chemical sensors. Results of an experiment where the various kinds of interactions between the ion-exchange polymer Nafion and some positively charged species are explored are reported, and a model system for competition (methyl viologen vs. ruthenium hexaamine) which increases significantly our understanding of the interaction is mentioned. The effect of γ-radiation on Nafion and its ion-exchange compabilities is discussed also. A system of conduction polymers primarily polypyrrole, used as a detector of electroinactive anions due to their doping-undergoing in the film is discussed. Preliminary results on a new method that involves chemical cross-linking of a triisocyane molecule with -OH containing polymers in the presence of enzymes are reported

  15. Beyond Behavioral Modification: Benefits of Socio-Emotional/Self-Regulation Training for Preschoolers with Behavior Problems

    Science.gov (United States)

    Graziano, Paulo A.; Hart, Katie

    2016-01-01

    The current study evaluated the initial efficacy of three intervention programs aimed at improving school readiness in preschool children with externalizing behavior problems (EBP). Participants for this study included 45 preschool children (76% boys; M[subscript age] = 5.16 years; 84% Hispanic/Latino background) with at-risk or clinically…

  16. A structural model of health behavior modification among patients with cardiovascular disease.

    Science.gov (United States)

    Goong, Hwasoo; Ryu, Seungmi; Xu, Lijuan

    2016-02-01

    The purpose of the study was to test a structural equation model in which social support, health beliefs, and stage of change predict the health behaviors of patients with cardiovascular disease. A cross-sectional correlational design was used. Using convenience sampling, a survey about social support, health belief, stage of change, and health behavior was completed by 314 adults with cardiovascular disease from outpatient clinics in 2 university hospitals in Korea. Data were analyzed using a structural equation model with the Analysis of Moment program. The participants were aged 53.44±13.19 years (mean±SD), and about 64% of them were male. The proposed model fit the data from the study well, explaining 19% and 60% of the variances in the stage of change and health behavior, respectively. The findings indicate that the performance of health behavior modification among the patients with cardiovascular disease can be explained by social support, health belief, and stage of change based on a health-belief and stage-of-change model. Further studies are warranted to confirm the efficacy of health-promoting strategies in initiating and maintaining the performance of health behaviors by providing social support from family and medical staff and enhancing health belief. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. The prepuce free flap in 10 patients : modifications in flap design and surgical technique

    NARCIS (Netherlands)

    Werker, Paul M N

    The prepuce free flap was used in 10 oral and oropharyngeal reconstructions. During the course of this study, various modifications took place. Residual penile skin necrosis and skin island necrosis early in the series led to modification of flap design. This solved the donor-site problem by placing

  18. Effects of compositional modifications on the sensitization behavior of Fe-Cr-Mn steels

    International Nuclear Information System (INIS)

    Edgemon, G.L.; Tortorelli, P.F.; Bell, G.E.C.

    1992-01-01

    Fe-Cr-Mn steels may possibly be used in conjuction with aqueous blankets or coolants in a fusion device. Therefore, standard chemical immersion (modified Strauss) tests were conducted to characterize the effects of compositional modifications on the thermal sensitization behavior of these steels. A good correlation among weight losses, intergranular corrosion, and cracking was found. The most effective means of decreasing their susceptibility was through reduction of the carbon concentration of these steels to 0.1%, but the sensitization resistance of Fe-Cr-Mn-0.1 C compositions was still inferior to type 304L and other similar stainless steels. Alloying additions that form stable carbides did not have a very significant influence on the sensitization behavior. (orig.)

  19. Modification of fuel performance code to evaluate iron-based alloy behavior under LOCA scenario

    Energy Technology Data Exchange (ETDEWEB)

    Giovedi, Claudia; Martins, Marcelo Ramos, E-mail: claudia.giovedi@labrisco.usp.br, E-mail: mrmartin@usp.br [Laboratorio de Analise, Avaliacao e Gerenciamento de Risco (LabRisco/POLI/USP), São Paulo, SP (Brazil); Abe, Alfredo; Muniz, Rafael O.R.; Gomes, Daniel de Souza; Silva, Antonio Teixeira e, E-mail: ayabe@ipen.br, E-mail: dsgomes@ipen.br, E-mail: teixiera@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

    2017-07-01

    Accident tolerant fuels (ATF) has been studied since the Fukushima Daiichi accident in the research efforts to develop new materials which under accident scenarios could maintain the fuel rod integrity for a longer period compared to the cladding and fuel system usually utilized in Pressurized Water Reactors (PWR). The efforts have been focused on new materials applied as cladding, then iron-base alloys appear as a possible candidate. The aim of this paper is to implement modifications in a fuel performance code to evaluate the behavior of iron based alloys under Loss-of-Coolant Accident (LOCA) scenario. For this, initially the properties related to the thermal and mechanical behavior of iron-based alloys were obtained from the literature, appropriately adapted and introduced in the fuel performance code subroutines. The adopted approach was step by step modifications, where different versions of the code were created. The assessment of the implemented modification was carried out simulating an experiment available in the open literature (IFA-650.5) related to zirconium-based alloy fuel rods submitted to LOCA conditions. The obtained results for the iron-based alloy were compared to those obtained using the regular version of the fuel performance code for zircaloy-4. The obtained results have shown that the most important properties to be changed are those from the subroutines related to the mechanical properties of the cladding. The results obtained have shown that the burst is observed at a longer time for fuel rods with iron-based alloy, indicating the potentiality of this material to be used as cladding with ATF purposes. (author)

  20. Modification of fuel performance code to evaluate iron-based alloy behavior under LOCA scenario

    International Nuclear Information System (INIS)

    Giovedi, Claudia; Martins, Marcelo Ramos; Abe, Alfredo; Muniz, Rafael O.R.; Gomes, Daniel de Souza; Silva, Antonio Teixeira e

    2017-01-01

    Accident tolerant fuels (ATF) has been studied since the Fukushima Daiichi accident in the research efforts to develop new materials which under accident scenarios could maintain the fuel rod integrity for a longer period compared to the cladding and fuel system usually utilized in Pressurized Water Reactors (PWR). The efforts have been focused on new materials applied as cladding, then iron-base alloys appear as a possible candidate. The aim of this paper is to implement modifications in a fuel performance code to evaluate the behavior of iron based alloys under Loss-of-Coolant Accident (LOCA) scenario. For this, initially the properties related to the thermal and mechanical behavior of iron-based alloys were obtained from the literature, appropriately adapted and introduced in the fuel performance code subroutines. The adopted approach was step by step modifications, where different versions of the code were created. The assessment of the implemented modification was carried out simulating an experiment available in the open literature (IFA-650.5) related to zirconium-based alloy fuel rods submitted to LOCA conditions. The obtained results for the iron-based alloy were compared to those obtained using the regular version of the fuel performance code for zircaloy-4. The obtained results have shown that the most important properties to be changed are those from the subroutines related to the mechanical properties of the cladding. The results obtained have shown that the burst is observed at a longer time for fuel rods with iron-based alloy, indicating the potentiality of this material to be used as cladding with ATF purposes. (author)

  1. Mindfulness and Modification Therapy for Behavioral Dysregulation: A Comparison Trial Focused on Substance Use and Aggression.

    Science.gov (United States)

    Wupperman, Peggilee; Cohen, Mia Gintoft; Haller, Deborah L; Flom, Peter; Litt, Lisa C; Rounsaville, Bruce J

    2015-10-01

    Disorders of behavioral dysregulation often involve more than one dsyregulated behavior (e.g., drug abuse and aggression, alcohol abuse and gambling). The high co-occurrence suggests the need of a transdiagnostic treatment that can be customized to target multiple specific behaviors. The current pilot study compared a 20-week, individual transdiagnostic therapy (mindfulness and modification therapy [MMT]) versus treatment as usual (TAU) in targeting alcohol problems, drug use, physical aggression, and verbal aggression in self-referred women. Assessments were administered at baseline, post-intervention, and 2-month follow-up. Wilcoxon signed-ranked tests and multilevel modeling showed that MMT (n = 13) displayed (a) significant and large decreases in alcohol/drug use, physical aggression, and verbal aggression; (b) significantly greater decreases in alcohol/drug use and physical aggression than did TAU (n = 8); and (c) minimal-to-no deterioration of effects at follow-up. Both conditions showed significant decreases in verbal aggression, with no statistically significant difference between conditions. MMT also displayed greater improvements in mindfulness. Preliminary findings support the feasibility and efficacy of MMT in decreasing multiple dysregulated behaviors. © 2015 Wiley Periodicals, Inc.

  2. Incorporating behavioral techniques into a serious video game for children

    Science.gov (United States)

    Little is known about how to design serious video games for children. The purpose of this paper is to describe how behavior change techniques promoting self-regulation were incorporated into a serious video game to help children consume more fruit and vegetables, and the extent to which these techn...

  3. Alternative Education: A Comparative Case Study of the Behavior Modification Programs of Two Upstate South Carolina Alternative Schools for Youth Who Exhibit Behavior That Is Disruptive

    Science.gov (United States)

    Scipio, Timothy Lamont

    2013-01-01

    This study examined behavior modification programs in schools designed to focus on discipline and that aim to reform disruptive behavior in students, usually over a limited period of time. This was a comparative case study of two type II alternative schools in the Upstate of South Carolina. The findings contributed to the research base regarding…

  4. Effectiveness of a behavior modification program for older people with uncontrolled type 2 diabetes.

    Science.gov (United States)

    Ounnapiruk, Liwan; Wirojratana, Virapun; Meehatchai, Nitaya; Turale, Sue

    2014-06-01

    This quasi-experimental study examined the effectiveness of a behavior modification program for diabetic control in Thai elders with uncontrolled Type 2 Diabetes. Purposive sampling was used to select 30 elders from one community as an intervention group, and 30 from a neighboring community as a control group. The intervention group participated in a program of 12 weeks' duration involving activities related to group counseling, group discussion, and an empowerment process that enhanced appropriate consumption of healthy diet, medication taking, and exercise. Data were collected by interviews using a questionnaire to assess knowledge of diabetes, perceived self-efficacy, and diabetes control behavior, including fasting blood glucose and glycosylated hemoglobin, were examined at the baseline and three months thereafter. At program completion, the intervention group had significantly higher scores of knowledge, self-efficacy, and health behaviors than those in the control group, but blood glucose and glycosylated hemoglobin were not significantly different. Although nurses can use aspects of this program to benefit elders with diabetes who require support and education, further research is required to provide improved health outcomes such as better glycemic control. © 2013 Wiley Publishing Asia Pty Ltd.

  5. Electrophysiological brain indices of risk behavior modification induced by contingent feedback.

    Science.gov (United States)

    Megías, Alberto; Torres, Miguel Angel; Catena, Andrés; Cándido, Antonio; Maldonado, Antonio

    2018-02-01

    The main aim of this research was to study the effects of response feedback on risk behavior and the neural and cognitive mechanisms involved, as a function of the feedback contingency. Sixty drivers were randomly assigned to one of three feedback groups: contingent, non-contingent and no feedback. The participants' task consisted of braking or not when confronted with a set of risky driving situations, while their electroencephalographic activity was continuously recorded. We observed that contingent feedback, as opposed to non-contingent feedback, promoted changes in the response bias towards safer decisions. This behavioral modification implied a higher demand on cognitive control, reflected in a larger amplitude of the N400 component. Moreover, the contingent feedback, being predictable and entailing more informative value, gave rise to smaller SPN and larger FRN scores when compared with non-contingent feedback. Taken together, these findings provide a new and complex insight into the neurophysiological basis of the influence of feedback contingency on the processing of decision-making under risk. We suggest that response feedback, when contingent upon the risky behavior, appears to improve the functionality of the brain mechanisms involved in decision-making and can be a powerful tool for reducing the tendency to choose risky options in risk-prone individuals. Copyright © 2018 Elsevier B.V. All rights reserved.

  6. Modification V to the computer code, STRETCH, for predicting coated-particle behavior

    International Nuclear Information System (INIS)

    Valentine, K.H.

    1975-04-01

    Several modifications have been made to the stress analysis code, STRETCH, in an attempt to improve agreement between the calculated and observed behavior of pyrocarbon-coated fuel particles during irradiation in a reactor environment. Specific areas of the code that have been modified are the neutron-induced densification model and the neutron-induced creep calculation. Also, the capability for modeling surface temperature variations has been added. HFIR Target experiments HT-12 through HT-15 have been simulated with the modified code, and the neutron-fluence vs particle-failure predictions compare favorably with the experimental results. Listings of the modified FORTRAN IV main source program and additional FORTRAN IV functions are provided along with instructions for supplying the additional input data. (U.S.)

  7. Microstructure Characterization and Hardness Evaluation of Alloy 52 Welded Stainless Steel 316 Subjected to Ultrasonic Nanocyrtal Surface Modification Technique

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Amanov, A.; Pyun, Y. S. [Sun Moon Univ., Asan (Korea, Republic of); Kim, Y. S.; Choi, Y. S. [Andong National Univ., Andong (Korea, Republic of)

    2015-10-15

    In this study, an ultrasonic nanocrystal surface modification (UNSM) technique was applied to dissimilar weld point between STS316L and Alloy 52. This UNSM technique is a patented technology, which can be described as a type of ultrasonic cold-forging technology. It has been demonstrated that the UNSM technique is a simple method to produce a nanocrystalline surface layer at the top surface of metallic materials. Microstructure and hardness of STS316L and Alloy 52 are investigated before and after UNSM treatment. It is expected according to the previous study that the UNSM technique is able to release the residual stress which delays PWSCC. In this study, microstructural characterization and hardness evaluation of STS316L and welded Alloy 52 subjected to UNSM technique were investigated.

  8. A cone beam CT-guided online plan modification technique to correct interfractional anatomic changes for prostate cancer IMRT treatment

    International Nuclear Information System (INIS)

    Fu Weihua; Yang Yong; Yue, Ning J; Heron, Dwight E; Huq, M Saiful

    2009-01-01

    The purpose of this work is to develop an online plan modification technique to compensate for the interfractional anatomic changes for prostate cancer intensity-modulated radiation therapy (IMRT) treatment based on daily cone beam CT (CBCT) images. In this proposed technique, pre-treatment CBCT images are acquired after the patient is set up on the treatment couch using an in-room laser with the guidance of the setup skin marks. Instead of moving the couch to rigidly align the target or re-planning using the CBCT images, we modify the original IMRT plan to account for the interfractional target motion and deformation based on the daily CBCT image feedback. The multileaf collimator (MLC) leaf positions for each subfield are automatically adjusted in the proposed algorithm based on the position and shape changes of target projection in the beam's eye view (BEV). Three typical prostate cases were adopted to evaluate the proposed technique, and the results were compared with those obtained with bony-structure-based rigid translation correction, prostate-based correction and CBCT-based re-planning strategies. The study revealed that the proposed modification technique is superior to the bony-structure-based and prostate-based correction techniques, especially when interfractional target deformation exists. Its dosimetric performance is closer to that of the re-planned strategy, but with much higher efficiency, indicating that the introduced online CBCT-guided plan modification technique may be an efficient and practical method to compensate for the interfractional target position and shape changes for prostate IMRT.

  9. Cognitive techniques and language: A return to behavioral origins.

    Science.gov (United States)

    Froján Parga, María X; Núñez de Prado Gordillo, Miguel; de Pascual Verdú, Ricardo

    2017-08-01

    the main purpose of this study is to offer an alternative explanatory account of the functioning of cognitive techniques that is based on the principles of associative learning and highlights their verbal nature. The traditional accounts are questioned and analyzed in the light of the situation of psychology in the 1970s. conceptual analysis is employed to revise the concepts of language, cognition and behavior. Several operant- and Pavlovian-based approaches to these phenomena are presented, while particular emphasis is given to Mowrer’s (1954) approach and Ryle (1949) and Wittgenstein’s (1953) philosophical contributions to the field. several logical problems are found in regard to the theoretical foundations of cognitive techniques. A combination of both operant and Pavlovian paradigms based on the above-mentioned approaches is offered as an alternative explanatory account of cognitive techniques. This new approach could overcome the conceptual fragilities of the cognitive standpoint and its dependence upon constructs of dubious logical and scientific validity.

  10. The real-time control of planetary rovers through behavior modification

    Science.gov (United States)

    Miller, David P.

    1991-01-01

    It is not yet clear of what type, and how much, intelligence is needed for a planetary rover to function semi-autonomously on a planetary surface. Current designs assume an advanced AI system that maintains a detailed map of its journeys and the surroundings, and that carefully calculates and tests every move in advance. To achieve these abilities, and because of the limitations of space-qualified electronics, the supporting rover is quite sizable, massing a large fraction of a ton, and requiring technology advances in everything from power to ground operations. An alternative approach is to use a behavior driven control scheme. Recent research has shown that many complex tasks may be achieved by programming a robot with a set of behaviors and activation or deactivating a subset of those behaviors as required by the specific situation in which the robot finds itself. Behavior control requires much less computation than is required by tradition AI planning techniques. The reduced computation requirements allows the entire rover to be scaled down as appropriate (only down-link communications and payload do not scale under these circumstances). The missions that can be handled by the real-time control and operation of a set of small, semi-autonomous, interacting, behavior-controlled planetary rovers are discussed.

  11. Comparative Analysis and Modification of Imaging Techniques in the Parametric Studies of Control Systems

    Directory of Open Access Journals (Sweden)

    I. K. Romanova

    2017-01-01

    optimum. The main object of visualization has become a field of the anti-gradients, which was visualized both through the color-schemes, and through the radial compass-type plots. As a result of building these plots, the criteria have been revealed with anti-gradients in the opposite quadrants, i.e. having opposite trends. The next phase was to assess a degree of the joint effect of parameters on the system behavior. A scatter of gradients for an entire set of varied parameters was visualized, and statistical characteristics of distribution of a set of the anti-gradient vectors were calculated. Losses and winnings when choosing the compromise solutions through visualizations of a series of computational experiments were assessed.  The article shows dynamics of changing anti-gradient vectors with variations of parameters. All criteria have been combined in the HivePlots type image. According to the results of a joint analysis of the plots, were determined zones of returned values (inaccessibility values of criteria for a given structure of control, and a compromise solution in the unified field. Shows the application of the developed approaches to the multi-objective optimization problem when there are more than two criteria, namely, parametric synthesis of a double-circuit motion control system of the aircrafts the quality of which is described by four parameters: overshoot, transition time, rise time, and integral quadratic criterion of the deviation from a terminal trajectory.The developed technique of analysis allows us to identify possible compromise solutions, areas of sensitivity, mutual and dominant influence of parameters, and possible losses in trade-offs. The visual images are the task-supporting aid for a designer to make decision.

  12. Behavior of restriction–modification systems as selfish mobile elements and their impact on genome evolution

    Science.gov (United States)

    Kobayashi, Ichizo

    2001-01-01

    Restriction–modification (RM) systems are composed of genes that encode a restriction enzyme and a modification methylase. RM systems sometimes behave as discrete units of life, like viruses and transposons. RM complexes attack invading DNA that has not been properly modified and thus may serve as a tool of defense for bacterial cells. However, any threat to their maintenance, such as a challenge by a competing genetic element (an incompatible plasmid or an allelic homologous stretch of DNA, for example) can lead to cell death through restriction breakage in the genome. This post-segregational or post-disturbance cell killing may provide the RM complexes (and any DNA linked with them) with a competitive advantage. There is evidence that they have undergone extensive horizontal transfer between genomes, as inferred from their sequence homology, codon usage bias and GC content difference. They are often linked with mobile genetic elements such as plasmids, viruses, transposons and integrons. The comparison of closely related bacterial genomes also suggests that, at times, RM genes themselves behave as mobile elements and cause genome rearrangements. Indeed some bacterial genomes that survived post-disturbance attack by an RM gene complex in the laboratory have experienced genome rearrangements. The avoidance of some restriction sites by bacterial genomes may result from selection by past restriction attacks. Both bacteriophages and bacteria also appear to use homologous recombination to cope with the selfish behavior of RM systems. RM systems compete with each other in several ways. One is competition for recognition sequences in post-segregational killing. Another is super-infection exclusion, that is, the killing of the cell carrying an RM system when it is infected with another RM system of the same regulatory specificity but of a different sequence specificity. The capacity of RM systems to act as selfish, mobile genetic elements may underlie the structure and

  13. Behavior of restriction-modification systems as selfish mobile elements and their impact on genome evolution.

    Science.gov (United States)

    Kobayashi, I

    2001-09-15

    Restriction-modification (RM) systems are composed of genes that encode a restriction enzyme and a modification methylase. RM systems sometimes behave as discrete units of life, like viruses and transposons. RM complexes attack invading DNA that has not been properly modified and thus may serve as a tool of defense for bacterial cells. However, any threat to their maintenance, such as a challenge by a competing genetic element (an incompatible plasmid or an allelic homologous stretch of DNA, for example) can lead to cell death through restriction breakage in the genome. This post-segregational or post-disturbance cell killing may provide the RM complexes (and any DNA linked with them) with a competitive advantage. There is evidence that they have undergone extensive horizontal transfer between genomes, as inferred from their sequence homology, codon usage bias and GC content difference. They are often linked with mobile genetic elements such as plasmids, viruses, transposons and integrons. The comparison of closely related bacterial genomes also suggests that, at times, RM genes themselves behave as mobile elements and cause genome rearrangements. Indeed some bacterial genomes that survived post-disturbance attack by an RM gene complex in the laboratory have experienced genome rearrangements. The avoidance of some restriction sites by bacterial genomes may result from selection by past restriction attacks. Both bacteriophages and bacteria also appear to use homologous recombination to cope with the selfish behavior of RM systems. RM systems compete with each other in several ways. One is competition for recognition sequences in post-segregational killing. Another is super-infection exclusion, that is, the killing of the cell carrying an RM system when it is infected with another RM system of the same regulatory specificity but of a different sequence specificity. The capacity of RM systems to act as selfish, mobile genetic elements may underlie the structure and

  14. Preliminary investigation into the use of surface modification techniques to detect organic materials in meteorites

    OpenAIRE

    Goodyear, M. D.; Gilmour, I.; Pearson, V. K.

    2011-01-01

    Many carbonaceous chondrites (CCs) display evidence of aqueous and/or thermal alteration of their component minerals. In addition, CCs also contain up to ca. 5% carbon, much of which is organic, insoluble, involatile and unreactive, and known as insoluble organic material (IOM). It is not known if there is a causal connection between the mineral alteration, and formation or modification of organic materials; however by understanding the relationships between them, any connections (chemical or...

  15. Nanolithography and nanochemistry: probe-related patterning techniques and chemical modification for nanometer-sized devices

    NARCIS (Netherlands)

    Wouters, D.; Schubert, U.S.

    2004-01-01

    The size regime for devices produced by photolithographic techniques is limited. Therefore, other patterning techniques have been intensively studied to create smaller structures. Scanning-probe-based patterning techniques, such as dip-pen lithography, local force-induced patterning, and local-probe

  16. Vaginal-sparing ventral buccal mucosal graft urethroplasty for female urethral stricture: A novel modification of surgical technique.

    Science.gov (United States)

    Hoag, Nathan; Gani, Johan; Chee, Justin

    2016-07-01

    To present a novel modification of surgical technique to treat female urethral stricture (FUS) by a vaginal-sparing ventral buccal mucosal urethroplasty. Recurrent FUS represents an uncommon, though difficult clinical scenario to manage definitively. A variety of surgical techniques have been described to date, yet a lack of consensus on the optimal procedure persists. We present a 51-year-old female with urethral stricture involving the entire urethra. Suspected etiology was iatrogenic from cystoscopy 17 years prior. Since then, the patient had undergone at least 25 formal urethral dilations and periods of self-dilation. In lithotomy position, the urethra was dilated to accommodate forceps, and ventral urethrotomy carried out sharply, exposing a bed of periurethral tissue. Buccal mucosa was harvested, and a ventral inlay technique facilitated by a nasal speculum, was used to place the graft from the proximal urethra/bladder neck to urethral meatus without a vaginal incision. Graft was sutured into place, and urethral Foley catheter inserted. The vaginal-sparing ventral buccal mucosal graft urethroplasty was deemed successful as of last follow-up. Flexible cystoscopy demonstrated patency of the repair at 6 months. At 10 months of follow-up, the patient was voiding well, with no urinary incontinence. No further interventions have been required. This case describes a novel modification of surgical technique for performing buccal mucosal urethroplasty for FUS. By avoiding incision of the vaginal mucosa, benefits may include reduced: morbidity, urinary incontinence, and wound complications including urethro-vaginal fistula.

  17. Prelinguistic Behavior of Infants of Assisted Reproductive Techniques

    Science.gov (United States)

    Noori, Soudabeh; Nedaeifard, Leila; Agarasouli, Zahra; Koohpaiehzadeh, Jalil; Kermani, Ramin Mozafari; Fazeli, Abolhasan Shahzadeh

    2012-01-01

    Objective The aim of this study is assessment of effects of different assisted reproductive techniques (ART) like in vitro fertilization (IVF) and intra cytoplasmic sperm injection (ICSI) on prelinguistic behavior of infants conceived by these techniques. Methods In this descriptive, cross sectional study, prelinguistic behavior of 151 full term ART infants of Royan Institute have been assessed in Children's Health and Development Research Center of Tehran from August 2007 until August 2009. Questionnaires were completed by parents at 9 months old. The questionnaire was standard according to Early Language Milestone Scale-2 (ELM-2). Data were analyzed by SPSS version 16 and using chi-square test. Findings Twenty-two (14.5%) of infants were conceived by IVF and 129 (85.4%) by ICSI. Number of infants with delay in reduplicated babbling in ICSI method was more than in IVF. There was only a significant difference in echolalia delay in the two sexes. Echolalia was delayed more in boys. Delay of reduplicated babbling was more in infants of younger mothers. There was no relation between speech and language defect of parents and infants. Conclusion This study showed that prelingustic behavior of ART infants are affected by kind of ART method, infant sex, and mother's age at the time of pregnancy. PMID:23431035

  18. "The Knowledge of" Counselors in Balqa Governorate: Behavior Modification Strategies in Light of Some of the Variables

    Science.gov (United States)

    Al-basel, D-Nagham Mohammad Abu

    2013-01-01

    The present study aimed to identify the extent of knowledge of counselor behavior modification strategies. The current study sample consisted of (80) mentor and guide, were selected randomly from among all workers enrolled in regular public schools in the Balqa governorate represented the community study for the academic year 2012-2013. The study…

  19. Development of Surface Modification Techniques for Enhanced Safety of Light Water Reactors: Recent Progress and Future Direction at THLAB

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Gwang Hyeok; Jeong, Ui Ju; Son, Hong Hyun; Jeun, Gyoo Dong; Kim, Sung Joong [Hanyang University, Daejeon (Korea, Republic of)

    2016-05-15

    They concluded that the CHF enhancement in nanofluid boiling was mainly affected by the surface characteristics of the developed layer. Furthermore, an introduction of surface modification can be utilized to secure the safety of nuclear reactor systems. At many components of the reactor systems, energetic boiling heat transfer occurs, and potential thermal attack to the systems is expected under normal or accident environments. In particular, during a reactor operation, fission energy is deposited in the fuel assemblies in a core. Also, under severe conditions, failure of a reactor vessel may occur by high temperature molten materials. In this article, we introduce the surface modification techniques and recent achievements. After a brief description of each deposition mechanism, an assessment of thermal margin for both the technologies is discussed based on pool boiling experiments conducted at THLAB. Moreover, in the latter part of each chapter, experimental facilities for applied heat transfer tests to consider reactor environments are presented.

  20. Modification of medullary respiratory-related discharge patterns by behaviors and states of arousal.

    Science.gov (United States)

    Chang, F C

    1992-02-07

    The modulatory influences of behaviors and states of arousal on bulbar respiratory-related unit (RRU) discharge patterns were studied in an unanesthetized, freely behaving guinea pig respiratory model system. When fully instrumented, this model system permits concurrent monitoring and recording of (i) single units from either Bötzinger complex or nucleus para-ambiguus; (ii) electrocorticogram; and, (iii) diaphragmatic EMG. In addition to being used in surveys of RRU discharge patterns in freely behaving states, the model system also offered a unique opportunity in investigating the effects of pentobarbital on RRU discharge patterns before, throughout the course of, and during recovery from anesthesia. In anesthetized preparations, a particular RRU discharge pattern (such as tonic, incrementing or decrementing) typically displayed little, if any notable variation. The most striking development following pentobarbital was a state of progressive bradypnea attributable to a significantly augmented RRU cycle duration, burst duration and an increase in the RRU spike frequencies during anesthesia. In freely behaving states, medullary RRU activities rarely adhered to a fixed, immutable discharge pattern. More specifically, the temporal organization (such as burst duration, cycle duration, and the extent of modulation of within-burst spike frequencies) of RRU discharge patterns regularly showed complex and striking variations, not only with states of arousal (sleep/wakefulness, anesthesia) but also with discrete alterations in electrocorticogram (ECoG) activities and a multitude of on-going behavioral repertoires such as volitional movement, postural modification, phonation, mastication, deglutition, sniffing/exploratory behavior, alerting/startle reflexes. Only during sleep, and on occasions when the animal assumed a motionless, resting posture, could burst patterns of relatively invariable periodicity and uniform temporal attributes be observed. RRU activities during

  1. Corrosion behavior of boride layers evaluated by the EIS technique

    Energy Technology Data Exchange (ETDEWEB)

    Campos, I. [Instituto Politecnico Nacional. SEPI-ESIME U.P. Adolfo Lopez Mateos, Zacatenco, Mexico D.F. 07738 (Mexico)], E-mail: icampos@ipn.mx; Palomar-Pardave, M. [Universidad Autonoma Metropolitana-Azcapotzalco, Materials Department, Avenue San Pablo 180 Col. Reynosa Tamaulipas, Mexico D.F. 02200 (Mexico); Amador, A. [Tecnologico de Monterrey, Campus Ciudad de Mexico, Calle del Puente 222 Col. Ejidos de Huipulco, Mexico D.F. 14380 (Mexico); VillaVelazquez, C. [Instituto Politecnico Nacional. SEPI-ESIME U.P. Adolfo Lopez Mateos, Zacatenco, Mexico D.F. 07738 (Mexico); Hadad, J. [Tecnologico de Monterrey, Campus Ciudad de Mexico, Calle del Puente 222 Col. Ejidos de Huipulco, Mexico D.F. 14380 (Mexico)

    2007-09-30

    The corrosion behavior of boride layers at the AISI 304 steel surface is evaluated in the present study. Electrochemical impedance spectroscopy (EIS) technique was used for the evaluation of the polarization resistance at the steel surface, with the aid of AUTOLAB potentiostat. Samples were treated with boron paste thickness of 4 and 5 mm, in the range of temperatures 1123 {<=} T {<=} 1273 K and exposed time of 4 and 6 h. The electrochemical technique employed 10 mV AC with a frequency scan range from 8 kHz to 3 mHz in deaerated 0.1 M NaCl solution. Nyquist diagrams show that the highest values of corrosion resistance are present in the samples borided at the temperature of 1273 K, with treatment time of 4 h and 4 mm of boron paste thickness. The values of corrosion resistance on borided steels are compared with the porosity exhibited in the layers.

  2. Modification of severe violent and aggressive behavior among psychiatric inpatients through the use of a short-term token economy.

    Science.gov (United States)

    Park, Jae Soon; Lee, Kyunghee

    2012-12-01

    Meager research has been carried out to determine the effectiveness of the token economy among patients behaving violently in mental hospitals. The purpose of this study was to examine the effectiveness of the Short-Term Token Economy (STTE) on violent behavior among chronic psychiatric in-patients. A nonequivalent control group design method was utilized. Participants in an experimental group (n=22) and control group (n=22) took part in this study from January to April, 2008. Observation on aggressive behavior among male in-patients in one hospital as a baseline was made during the week before the behavior modification program and measurement of aggressive behavior was done using the Overt Aggression Scale (OAS), which includes verbal attacks, property damage and physical attacks. The aggressive behavior scores of the experimental group decreased, those of the control group, scores showed an increase after the eight-week behavior modification program utilizing STTE. The results of the study indicate that STTE is effective in reducing the incidence of aggressive behavior among male in-patients in psychiatric hospitals. The outcome of this study should be helpful in reducing the use of coercive measures or psychoactive medication in controlling the violent behavior among in-patients in hospitals.

  3. Experimental modification of interpretation bias about animal fear in young children: effects on cognition, avoidance behavior, anxiety vulnerability, and physiological responding.

    Science.gov (United States)

    Lester, Kathryn J; Field, Andy P; Muris, Peter

    2011-01-01

    This study investigated the effects of experimentally modifying interpretation biases for children's cognitions, avoidance behavior, anxiety vulnerability, and physiological responding. Sixty-seven children (6-11 years) were randomly assigned to receive a positive or negative interpretation bias modification procedure to induce interpretation biases toward or away from threat about ambiguous situations involving Australian marsupials. Children rapidly learned to select outcomes of ambiguous situations, which were congruent with their assigned condition. Furthermore, following positive modification, children's threat biases about novel ambiguous situations significantly decreased, whereas threat biases significantly increased after negative modification. In response to a stress-evoking behavioral avoidance test, positive modification attenuated behavioral avoidance compared to negative modification. However, no significant effects of bias modification on anxiety vulnerability or physiological responses to this stress-evoking Behavioral Avoidance Task were observed.

  4. Modification of the radiological technique of Parma for reduction of irradiation dose

    Energy Technology Data Exchange (ETDEWEB)

    Stampfel, G.; Ionesco-Farco, F.

    1982-04-01

    A modified radiological technique to demonstrate the temporo-mandibular joint is presented. An ordinary X-ray tube put on the skin is directed 10/sup 0/ dorso-ventrally and 10/sup 0/ caudo-cranially to the temporo-mandibular joint. The irradiation skin dose applied is ten times smaller than by using the conventional contact technique.

  5. Application of the Microwave Discharge Modification of the Wilzbach Technique for the Tritium Labelling of some Organics of Biological Interest

    International Nuclear Information System (INIS)

    Gosztonyi, T.

    1969-01-01

    The modification of the Wilzbach technique using microwave discharge has been routinely used in our laboratory for rapid tritium labellings. The applicability of the method and the effects of some of the reaction parameters were studied and published previously. The main advantage of the method is its simplicity and rapidity and the low extent of decomposition of the compound to be labelled during the reaction. Specific activities obtained, however, are not high enough for some investigations. In this paper the labelling of dihydrostreptomycine, tetracycline and antipyrine will be described

  6. Application of the Microwave Discharge Modification of the Wilzbach Technique for the Tritium Labelling of some Organics of Biological Interest

    Energy Technology Data Exchange (ETDEWEB)

    Gosztonyi, T

    1969-01-15

    The modification of the Wilzbach technique using microwave discharge has been routinely used in our laboratory for rapid tritium labellings. The applicability of the method and the effects of some of the reaction parameters were studied and published previously. The main advantage of the method is its simplicity and rapidity and the low extent of decomposition of the compound to be labelled during the reaction. Specific activities obtained, however, are not high enough for some investigations. In this paper the labelling of dihydrostreptomycine, tetracycline and antipyrine will be described.

  7. Modification of the cranial closing wedge ostectomy technique for the treatment of canine cruciate disease. Description and comparison with standard technique.

    Science.gov (United States)

    Wallace, A M; Addison, E S; Smith, B A; Radke, H; Hobbs, S J

    2011-01-01

    To describe a modification of the cranial closing wedge ostectomy (CCWO) technique and to compare its efficacy to the standard technique on cadaveric specimens. The standard and modified CCWO technique were applied to eight pairs of cadaveric tibiae. The following parameters were compared following the ostectomy: degrees of plateau levelling achieved (degrees), tibial long axis shift (degrees), reduction in tibial length (mm), area of bone wedge removed (cm²), and the area of proximal fragment (cm²). The size of the removed wedge of bone and the reduction in tibial length were significantly less with the modified CCWO technique. The modified CCWO has two main advantages. Firstly a smaller wedge is removed, allowing a greater preservation of bone stock in the proximal tibia, which is advantageous for implant placement. Secondly, the tibia is shortened to a lesser degree, which might reduce the risk of recurvatum, fibular fracture and patella desmitis. These factors are particularly propitious for the application of this technique to Terrier breeds with excessive tibial plateau angle, where large angular corrections are required. The modified CCWO is equally effective for plateau levelling and results in an equivalent tibial long-axis shift. A disadvantage with the modified technique is that not all of the cross sectional area of the distal fragment contributes to load sharing at the osteotomy.

  8. Surface modification and fatigue behavior of nitinol for load bearing implants

    Science.gov (United States)

    Bernard, Sheldon A.

    Musculoskeletal disorders are recognized amongst the most significant human health problems that exist today. Even though considerable research and development has gone towards understanding musculoskeletal disorders, there is still lack of bone replacement materials that are appropriate for restoring lost structures and functions, particularly for load-bearing applications. Many materials on the market today, such as titanium and stainless steel, suffer from significantly higher modulus than natural bone and low bioactivity leading to stress shielding and implant loosening over longer time use. Nitinol (NiTi) is an equiatomic intermetallic compound of nickel and titanium whose unique biomechanical and biological properties contributed to its increasing use as a biomaterial. An innovative method for creating dense and porous net shape NiTi alloy parts has been developed to improve biological properties while maintaining comparable or better mechanical properties than commercial materials that are currently in use. Laser engineered net shaping (LENS(TM)) and surface electrochemistry modification was used to create dense/porous samples and micro textured surfaces on NiTi parts, respectively. Porous implants are known to promote cell adhesion and have a low elastic modulus, a combination that can significantly increase the life of an implant. However, porosity can significantly reduce the fatigue life of an implant, and very little work has been reported on the fatigue behavior of bulk porous metals, specifically on porous nitinol alloy. High-cycle rotating bending and compression-compression fatigue behavior of porous NiTi fabricated using LENS(TM) were studied. In cyclic compression loading, plastic strain increased with increasing porosity and it was evident that maximum strain was achieved during the first 50000 cycles and remained constant throughout the remaining loading. No failures were observed due to loading up to 150% of the yield strength. When subjected

  9. MAP-IT: A Practical Tool for Planning Complex Behavior Modification Interventions.

    Science.gov (United States)

    Hansen, Sylvia; Kanning, Martina; Lauer, Romy; Steinacker, Jürgen M; Schlicht, Wolfgang

    2017-09-01

    Health research often aims to prevent noncommunicable diseases and to improve individual and public health by discovering intervention strategies that are effective in changing behavior and/or environments that are detrimental to one's health. Ideally, findings from original research support practitioners in planning and implementing effective interventions. Unfortunately, interventions often fail to overcome the translational block between science and practice. They often ignore theoretical knowledge, overlook empirical evidence, and underrate the impact of the environment. Accordingly, sustainable changes in individual behavior and/or the environment are difficult to achieve. Developing theory-driven and evidence-based interventions in the real world is a complex task. Existing implementation frameworks and theories often do not meet the needs of health practitioners. The purpose of this article is to synthesize existing frameworks and to provide a tool, the Matrix Assisting Practitioner's Intervention Planning Tool (MAP-IT), that links research to practice and helps practitioners to design multicomponent interventions. In this article, we use physical activity of older adults as an example to explain the rationale of MAP-IT. In MAP-IT, individual as well as environmental mechanisms are listed and behavior change techniques are linked to these mechanisms and to intervention components. MAP-IT is theory-driven and evidence-based. It is time-saving and helpful for practitioners when planning complex interventions.

  10. Tightrope fixation of ankle syndesmosis injuries: clinical outcome, complications and technique modification.

    LENUS (Irish Health Repository)

    Naqvi, Gohar A

    2012-06-01

    Ankle syndesmotic injuries are complex and require anatomic reduction and fixation. Tightrope fixation is a relatively new technique and we present the largest series of syndesmosis fixation using Arthrex Tightrope™ (Naples, FL, USA).

  11. Intra-population variation in behavior modification by the acanthocephalan Acanthocephalus dirus: are differences mediated by host condition?

    Science.gov (United States)

    Caddigan, Sara C; Barkauskas, Rima T; Sparkes, Timothy C

    2014-11-01

    The acanthocephalan parasite Acanthocephalus dirus infects the freshwater isopod Caecidotea intermedius as an intermediate host before completing its life cycle in a fish. Male C. intermedius infected by A. dirus parasites are less likely to engage in mating behavior than uninfected males but there is a significant intra-population variation in the occurrence of this behavioral change. Previous studies on uninfected isopods have shown that glycogen content is a predictor of male mating behavior and we examined whether the intra-population variation in the mating behavior of infected male C. intermedius could be explained by this relationship. A field-based behavioral experiment was used to quantify intra-population variation in male mating behavior, which showed that 50% of infected males were responsive to females and 50% were not responsive. Biochemical analysis of responsive and non-responsive males revealed that glycogen content was a predictor of the mating behavior for uninfected males but was not a predictor of mating behavior for infected males. For infected males, parasite intensity was a predictor of mating behavior. Males that contained more A. dirus parasites were less likely to undergo modification of mating behavior. We propose that the intra-population variation in the mating behavior of infected C. intermedius identified in nature was not mediated by host condition.

  12. Oxidation and thermal shock behavior of thermal barrier coated 18/10CrNi alloy with coating modifications

    Energy Technology Data Exchange (ETDEWEB)

    Guergen, Selim [Vocational School of Transportation, Anadolu University, Eskisehir (Turkmenistan); Diltemiz, Seyid Fehmi [Turkish Air Force1st Air Supply and Maintenance Center Command, Eskisehir (Turkmenistan); Kushan, Melih Cemal [Dept. of Mechanical Engineering, Eskisehir Osmangazi University, Eskisehir (Turkmenistan)

    2017-01-15

    In this study, substrates of 18/10CrNi alloy plates were initially sprayed with a Ni-21Cr-10Al-1Y bond coat and then with an yttria stabilized zirconia top coat by plasma spraying. Subsequently, plasma-sprayed Thermal barrier coatings (TBCs) were treated with two different modification methods, namely, vacuum heat treatment and laser glazing. The effects of modifications on the oxidation and thermal shock behavior of the coatings were evaluated. The effect of coat thickness on the bond strength of the coats was also investigated. Results showed enhancement of the oxidation resistance and thermal shock resistance of TBCs following modifications. Although vacuum heat treatment and laser glazing exhibited comparable results as per oxidation resistance, the former generated the best improvement in the thermal shock resistance of the TBCs. Bond strength also decreased as coat thickness increased.

  13. Vaginal-sparing ventral buccal mucosal graft urethroplasty for female urethral stricture: A novel modification of surgical technique

    Directory of Open Access Journals (Sweden)

    Nathan Hoag

    2016-07-01

    Full Text Available Purpose: To present a novel modification of surgical technique to treat female urethral stricture (FUS by a vaginal-sparing ventral buccal mucosal urethroplasty. Recurrent FUS represents an uncommon, though difficult clinical scenario to manage definitively. A variety of surgical techniques have been described to date, yet a lack of consensus on the optimal procedure persists. Materials and Methods: We present a 51-year-old female with urethral stricture involving the entire urethra. Suspected etiology was iatrogenic from cystoscopy 17 years prior. Since then, the patient had undergone at least 25 formal urethral dilations and periods of self-dilation. In lithotomy position, the urethra was dilated to accommodate forceps, and ventral urethrotomy carried out sharply, exposing a bed of periurethral tissue. Buccal mucosa was harvested, and a ventral inlay technique facilitated by a nasal speculum, was used to place the graft from the proximal urethra/bladder neck to urethral meatus without a vaginal incision. Graft was sutured into place, and urethral Foley catheter inserted. Results: The vaginal-sparing ventral buccal mucosal graft urethroplasty was deemed successful as of last follow-up. Flexible cystoscopy demonstrated patency of the repair at 6 months. At 10 months of follow-up, the patient was voiding well, with no urinary incontinence. No further interventions have been required. Conclusions: This case describes a novel modification of surgical technique for performing buccal mucosal urethroplasty for FUS. By avoiding incision of the vaginal mucosa, benefits may include reduced: morbidity, urinary incontinence, and wound complications including urethro-vaginal fistula.

  14. A novel surface modification technique for forming porous polymer monoliths in poly(dimethylsiloxane).

    Science.gov (United States)

    Burke, Jeffrey M; Smela, Elisabeth

    2012-03-01

    A new method of surface modification is described for enabling the in situ formation of homogenous porous polymer monoliths (PPMs) within poly(dimethylsiloxane) (PDMS) microfluidic channels that uses 365 nm UV illumination for polymerization. Porous polymer monolith formation in PDMS can be challenging because PDMS readily absorbs the monomers and solvents, changing the final monolith morphology, and because PDMS absorbs oxygen, which inhibits free-radical polymerization. The new approach is based on sequentially absorbing a non-hydrogen-abstracting photoinitiator and the monomers methyl methacrylate and ethylene diacrylate within the walls of the microchannel, and then polymerizing the surface treatment polymer within the PDMS, entangled with it but not covalently bound. Four different monolith compositions were tested, all of which yielded monoliths that were securely anchored and could withstand pressures exceeding the bonding strength of PDMS (40 psi) without dislodging. One was a recipe that was optimized to give a larger average pore size, required for low back pressure. This monolith was used to concentrate and subsequently mechanical lyse B lymphocytes.

  15. A modification of the Daisy II - 220 technique for the determination of ...

    African Journals Online (AJOL)

    Unknown

    digestibility using rumen fluid/cellulase have been used extensively in laboratories worldwide. These techniques use individual digestion containers shaken twice daily and a two-stage 48 h digestion. Due to the individual sample handling, filtration and washing steps performed, the introduction of human error and amount ...

  16. Phase behavior of multicomponent membranes: Experimental and computational techniques

    DEFF Research Database (Denmark)

    Bagatolli, Luis; Kumar, P.B. Sunil

    2009-01-01

    Recent developments in biology seems to indicate that the Fluid Mosaic model of membrane proposed by Singer and Nicolson, with lipid bilayer functioning only as medium to support protein machinery, may be too simple to be realistic. Many protein functions are now known to depend on the compositio....... This review includes basic foundations on membrane model systems and experimental approaches applied in the membrane research area, stressing on recent advances in the experimental and computational techniques....... membranes. Current increase in interest in the domain formation in multicomponent membranes also stems from the experiments demonstrating liquid ordered-liquid disordered coexistence in mixtures of lipids and cholesterol and the success of several computational models in predicting their behavior...

  17. Development of a useful technique for analyzing behavioral teratologic data

    International Nuclear Information System (INIS)

    Jensh, R.P.; Brent, R.L.

    1989-01-01

    Two measures of postnatal development are described in this paper: the PAC50 and AD50. These measures proved to be more sensitive than the use of means in the evaluation of three radiation studies involving postnatal developmental evaluation. PAC50 is the percent of achievement of a goal by litters or offspring in an experimental group at the age when 50% of the control litters or offspring attain that goal. AD50 is the age (acquisition day) at which 50% of the litters or offspring in each group attain a specified developmental goal. This methodology is a useful technique for analyzing selected behavioral data following in utero X-irradiation and may prove to be a sensitive means of determining postnatal alteration due to prenatal exposure to a variety of suspect agents

  18. Characteristics of a single-channel superconducting flux flow transistor fabricated by an AFM modification technique

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Seokcheol [Jeonnam Regional Innovation Agency, 1000 Namak-Ri, Samhyang-Myun, Muan-Gun, Jeollanam-Do 534-700 (Korea, Republic of)], E-mail: suntrac@jina.re.kr; Kim, Seong-Jong [Mokpo Maritime University, Chukkyo-Dong, Mokpo City, Cheonnam 530-729 (Korea, Republic of)

    2007-11-01

    The demand for high performance, integrity, and miniaturization in the area of electronic and mechanic devices has drawn interest in the fabrication of nanostructures. However, it is difficult to fabricate the channel with nano-scale using a conventional photography techniques. AFM anodization technique is a maskless process and effective method to overcome the difficulty in fabricating a nano-scale channel. In this paper, we first present a new fabrication of a single-channel SFFT using a selective oxidation process induced by an AFM probe. The modified channel was investigated by electron probe microanalyzer (EPMA) to find the compositional variation of the transformed region. In order to confirm the operation of a single-channel SFFT, we measured the voltage-current characteristics at the temperature of liquid nitrogen by an I-V automatic measurement system. Our results indicate that the single-channel SFFT having effect as a weak link is effectively fabricated by an AFM lithography process.

  19. Characteristics of a single-channel superconducting flux flow transistor fabricated by an AFM modification technique

    International Nuclear Information System (INIS)

    Ko, Seokcheol; Kim, Seong-Jong

    2007-01-01

    The demand for high performance, integrity, and miniaturization in the area of electronic and mechanic devices has drawn interest in the fabrication of nanostructures. However, it is difficult to fabricate the channel with nano-scale using a conventional photography techniques. AFM anodization technique is a maskless process and effective method to overcome the difficulty in fabricating a nano-scale channel. In this paper, we first present a new fabrication of a single-channel SFFT using a selective oxidation process induced by an AFM probe. The modified channel was investigated by electron probe microanalyzer (EPMA) to find the compositional variation of the transformed region. In order to confirm the operation of a single-channel SFFT, we measured the voltage-current characteristics at the temperature of liquid nitrogen by an I-V automatic measurement system. Our results indicate that the single-channel SFFT having effect as a weak link is effectively fabricated by an AFM lithography process

  20. Induced modifications on algae photosynthetic activity monitored by pump-and-probe technique

    Energy Technology Data Exchange (ETDEWEB)

    Barbini, R; Colao, F; Fantoni, R; Palucci, A; Ribezzo, S [ENEA, Centro Ricerche Frascati, Rome (Italy). Dip. Innovazione; Tarzillo, G; Carlozzi, P; Pelosi, E [CNR, Florence (Italy). Centro Studi Microorganismi Autotrofi

    1995-12-01

    The lidar fluorosensor system available at ENEA Frascati has been used for a series of laboratory measurements on brackish-water and marine phytoplankton grown in laboratory with the proper saline solution. The system, already used to measure the laser induced fluorescence spectra of different algae species and their detection limits, has been upgraded with a short pulse Nd:YAG laser and rearranged to test a new technique based on laser pump and probe excitation. Results of this new technique for remote monitoring of the in-vivo photosynthetic activity will be presented, as measured during a field campaign carried out in Florence during the Autumn 1993, where the effects of an actinic saturating light and different chemicals have also been checked.

  1. Safe genetic modification of cardiac stem cells using a site-specific integration technique.

    Science.gov (United States)

    Lan, Feng; Liu, Junwei; Narsinh, Kazim H; Hu, Shijun; Han, Leng; Lee, Andrew S; Karow, Marisa; Nguyen, Patricia K; Nag, Divya; Calos, Michele P; Robbins, Robert C; Wu, Joseph C

    2012-09-11

    Human cardiac progenitor cells (hCPCs) are a promising cell source for regenerative repair after myocardial infarction. Exploitation of their full therapeutic potential may require stable genetic modification of the cells ex vivo. Safe genetic engineering of stem cells, using facile methods for site-specific integration of transgenes into known genomic contexts, would significantly enhance the overall safety and efficacy of cellular therapy in a variety of clinical contexts. We used the phiC31 site-specific recombinase to achieve targeted integration of a triple fusion reporter gene into a known chromosomal context in hCPCs and human endothelial cells. Stable expression of the reporter gene from its unique chromosomal integration site resulted in no discernible genomic instability or adverse changes in cell phenotype. Namely, phiC31-modified hCPCs were unchanged in their differentiation propensity, cellular proliferative rate, and global gene expression profile when compared with unaltered control hCPCs. Expression of the triple fusion reporter gene enabled multimodal assessment of cell fate in vitro and in vivo using fluorescence microscopy, bioluminescence imaging, and positron emission tomography. Intramyocardial transplantation of genetically modified hCPCs resulted in significant improvement in myocardial function 2 weeks after cell delivery, as assessed by echocardiography (P=0.002) and MRI (P=0.001). We also demonstrated the feasibility and therapeutic efficacy of genetically modifying differentiated human endothelial cells, which enhanced hind limb perfusion (Pmodification system is a safe, efficient tool to enable site-specific integration of reporter transgenes in progenitor and differentiated cell types.

  2. Visualization by discharge illumination technique and modification by plasma actuator of rarefied Mach 2 airflow around a cylinder

    International Nuclear Information System (INIS)

    Leger, L; Depussay, E; Sellam, M; Barbosa, E

    2013-01-01

    The use of plasma actuators for flow control has received considerable attention in recent years. This kind of device seems to be an appropriate means of raising abilities in flow control thanks to total electric control, no moving parts and a fast response time. The experimental work presented here shows, firstly, the non-intrusive character of the visualization of the density field of an airflow around a cylinder obtained using a plasma luminescence technique. Experiments are made in a continuous supersonic wind tunnel. The static pressure in the flow is 8 Pa, the mean free path is about 0.3 mm and the airflow velocity is 510 m s −1 . Pressure measurements obtained by means of glass Pitot tube without the visualization discharge are proposed. Measured and simulated pressure profiles are in good agreement in the region near the cylinder. There is good correlation between numerical simulations of the supersonic flow field, analytical model predictions and experimental flow visualizations obtained by a plasma luminescence technique. Consequently, we show that the plasma luminescence technique is non-intrusive. Secondly, the effect of a dc discharge on a supersonic rarefied air flow around a cylinder is studied. An electrode is flush mounted on the cylinder. Stagnation pressure profiles are examined for different electrode positions on the cylinder. A shock wave modification depending on the electrode location is observed. The discharge placed at the upstream stagnation point induces an upstream shift of the bow shock, whereas a modification of the shock wave shape is observed when it is placed at 45° or 90°. (paper)

  3. The behavior modification through the play of children aged 3-7 years old

    Directory of Open Access Journals (Sweden)

    Flora Lamcja (Zeqaj

    2016-03-01

    Full Text Available The integration of theory, technique and common factors in psychotherapy has gained prominence since the 1990s. Previously, it was called eclecticism, but integration has become the preferred term to describe the blending of theory, technique and common factors (Norcross, 2005. In the past, eclecticism meant to choose from various theories and techniques a therapeutic strategy that appears best for a particular client (Schaefer, 2003, .308. However, Norcross (1987 explains eclecticism as a further integration through which various theories are applied on interactive and coordinated explanations of the therapy. Psychological disorders, especially in complex children and adolescents a multifaceted treatment approach is needed (Schaefer 2003. Indeed, many clients do not come with a clearly defined diagnosis, but rather several overlapping problems due to the co morbidity of issues (such as in the cases of complex trauma resulting in overlapping attention problems, along with phobias and sexualized behaviors. The clinicians trained in one theoretical and treatment approach are finding the “one size” cannot fit in all the presenting problems that are being faced today. Due to this multidimensional aspect the play child/play therapy calls for the unique demand that the therapist should wear a lot of different hats and should be skillful in changing from one therapeutic stance to another, in order to meet the needs of the child and of the various members in the child’s life (Coonerty, 1993. In one moment, the play therapist is intensively involved in deeply evocative and conflicted play therapy the child client. At that moment, the therapist needs to deal with the child’s internal struggles, setting limits and being an educator or mediator with the child, while in the next moment the therapist should be engaged with the role of a parent, or school psychologist, or classroom teacher to assess the child’s functioning

  4. Prefrontal lobotomy on Evita was done for behavior/personality modification, not just for pain control.

    Science.gov (United States)

    Nijensohn, Daniel E

    2015-07-01

    Eva Perón, best known as Evita, underwent a prefrontal lobotomy in 1952. Although the procedure was said to have been performed to relieve the pain of metastatic cancer, the author carried out a search for evidence that suggests that the procedure was prescribed to decrease violence and to modify Evita's behavior and personality, and not just for pain control. To further elucidate the circumstances surrounding the treatment of this well-known historic figure, the author reviewed the development of the procedure known as prefrontal lobotomy and its three main indications: management of psychiatric illness, control of intractable pain from terminal cancer, and mind control and behavior/personality modification. The role of pioneering neurosurgeons in the development of prefrontal lobotomy, particularly in Connecticut and at Yale University, was also studied, and the political and historical conditions in Argentina in 1952 and to the present were analyzed. Evita was the wife of Juan Perón, who was the supreme leader of the Peronist party as well as president of Argentina. In 1952, however, the Peronist government in Argentina was bicephalic because Evita led the left wing of the party and ran the Female Peronist Party and the Eva Perón Foundation. She was followed by a group of hardcore loyalists interested in accelerating the revolution. Evita was also suffering from metastatic cervical cancer, and her illness increased her anxiety and moved her to purchase weapons to start training workers' militias. Although the apparent purpose was to fight her husband's enemies, this was done without his knowledge. She delivered fiery political speeches and wrote incendiary documents that would have led to a fierce clash in the country at that time. Notwithstanding the disreputable connotation of conspiracy theories, evidence was found of a potentially sinister political conspiracy, led by General Perón, to quiet down his wife Evita and modify her behavior/personality to

  5. A major modification of the Joint European Torus using teleoperational techniques

    International Nuclear Information System (INIS)

    Rolfe, A.

    1998-04-01

    The Joint European Torus (JET) project was set up under the auspices of EURATOM in the late 1970's in order to study the feasibility of controlled Nuclear Fusion. The experimental device comprises a toroidal shaped vacuum vessel in which high temperature plasma is created and controlled. The inside of the torus is now inaccessible to personnel for around one year due to slightly elevated radiation levels. The JET programme however requires the immediate replacement of a major system within the torus and this must therefore be achieved using only remote handling techniques. This paper describes the preparations for this first fully remote handling shutdown at JET. (author)

  6. Surface Modification of Graphene Oxides by Plasma Techniques and Their Application for Environmental Pollution Cleanup.

    Science.gov (United States)

    Wang, Xiangxue; Fan, Qiaohui; Chen, Zhongshan; Wang, Qi; Li, Jiaxing; Hobiny, Aatef; Alsaedi, Ahmed; Wang, Xiangke

    2016-02-01

    Graphene oxides (GOs) have come under intense multidisciplinary study because of their unique physicochemical properties and possible applications. The large amount of oxygen-containing functional groups on GOs leads to a high sorption capacity for the removal of various kinds of organic and inorganic pollutants from aqueous solutions in environmental pollution cleanup. However, the lack of selectivity results in difficulty in the selective removal of target pollutants from aqueous solutions in the presence of other coexisting pollutants. Herein, the surface grafting of GOs with special oxygen-containing functional groups using low-temperature plasma techniques and the application of the surface-modified GOs for the efficient removal of organic and inorganic pollutants in environmental pollution are reviewed. This paper gives an account of our research on the application of GO-based nanomaterials in environmental pollution cleanup, including: (1) the synthesis and surface grafting of functional groups on GOs, summarizing various types of low-temperature plasma techniques for the synthesis of graphene/GOs; and (2) the application of graphene/GOs and their composites for the efficient removal of organic and inorganic pollutants from aqueous solutions, including the interaction mechanism according to recently published results. © 2015 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Modification and aging precipitation behavior of hypereutectic Al-21wt.%Si alloy treated by P+Ce combination

    Directory of Open Access Journals (Sweden)

    Liu Pei

    2014-11-01

    Full Text Available In the present study, the tested hypereutectic Al-21wt.%Si alloys were prepared by modifying the melt using different proportions of P and Ce, and then applying T6 heat treatment. The modification effects and mechanism of P+Ce complex modifier on the Si phase of hypereutectic Al-21wt.%Si alloy were studied, and the aging precipitation behavior after modification was characterized by means of tensile strength measurement, OM, SEM and TEM analysis. The results show that the massive primary silicon phase particles are significantly refined after modification, while the needle-like eutectic silicon crystals become fibrous and short. It was found that the mechanism of phosphorus modification on the primary silicon can be attributed to heterogeneous nucleation of AlP, while the modification mechanism of Ce can be explained by adsorbing-twinning theory. In the aged microstructure of the modified hypereutectic Al-21wt.%Si alloy, there existed some strengthening phases such as Al4Cu9, Al2Cu, AlCu3, and Al57Mn12. The P+Ce complex modifier not only affected the size of primary silicon and eutectic silicon, but also the aging behavior of alloys under the heat treatment process. When Al-21wt.%Si alloy was modified using 0.08%wt.P + 0.6wt.% Ce, the aging precipitates were dispersed uniformly in the alloy, and its mechanical properties at room and elevated temperatures are optimized (Rm = 287.6 MPa at RT, Rm = 210 MPa at 300 ℃.

  8. Effect of Behavior Modification on Outcome in Early- to Moderate-Stage Chronic Kidney Disease: A Cluster-Randomized Trial.

    Science.gov (United States)

    Yamagata, Kunihiro; Makino, Hirofumi; Iseki, Kunitoshi; Ito, Sadayoshi; Kimura, Kenjiro; Kusano, Eiji; Shibata, Takanori; Tomita, Kimio; Narita, Ichiei; Nishino, Tomoya; Fujigaki, Yoshihide; Mitarai, Tetsuya; Watanabe, Tsuyoshi; Wada, Takashi; Nakamura, Teiji; Matsuo, Seiichi

    2016-01-01

    Owing to recent changes in our understanding of the underlying cause of chronic kidney disease (CKD), the importance of lifestyle modification for preventing the progression of kidney dysfunction and complications has become obvious. In addition, effective cooperation between general physicians (GPs) and nephrologists is essential to ensure a better care system for CKD treatment. In this cluster-randomized study, we studied the effect of behavior modification on the outcome of early- to moderate-stage CKD. Stratified open cluster-randomized trial. A total of 489 GPs belonging to 49 local medical associations (clusters) in Japan. A total of 2,379 patients (1,195 in group A (standard intervention) and 1,184 in group B (advanced intervention)) aged between 40 and 74 years, who had CKD and were under consultation with GPs. All patients were managed in accordance with the current CKD guidelines. The group B clusters received three additional interventions: patients received both educational intervention for lifestyle modification and a CKD status letter, attempting to prevent their withdrawal from treatment, and the group B GPs received data sheets to facilitate reducing the gap between target and practice. The primary outcome measures were 1) the non-adherence rate of accepting continuous medical follow-up of the patients, 2) the collaboration rate between GPs and nephrologists, and 3) the progression of CKD. The rate of discontinuous clinical visits was significantly lower in group B (16.2% in group A vs. 11.5% in group B, p = 0.01). Significantly higher referral and co-treatment rates were observed in group B (pbehavior modification of CKD patients, namely, significantly lower discontinuous clinical visits, and behavior modification of both GPs and nephrologists, namely significantly higher referral and co-treatment rates, resulting in the retardation of CKD progression, especially in patients with proteinuric Stage 3 CKD. The University Hospital Medical Information

  9. MODIFICATION OF AGILITY RUNNING TECHNIQUE IN REACTION TO A DEFENDER IN RUGBY UNION

    Directory of Open Access Journals (Sweden)

    Keane W. Wheeler

    2010-09-01

    Full Text Available Three-dimensional kinematic analysis examined agility running technique during pre-planned and reactive performance conditions specific to attacking ball carries in rugby union. The variation to running technique of 8 highly trained rugby union players was compared between agility conditions (pre-planned and reactive and also agility performance speeds (fast, moderate and slow. Kinematic measures were used to determine the velocity of the centre of mass (COM in the anteroposterior (running speed and mediolateral (lateral movement speed planes. The position of foot-strike and toe-off was also examined for the step prior to the agility side- step (pre-change of direction phase and then the side-step (change of direction phase. This study demonstrated that less lateral movement speed towards the intended direction change occurred during reactive compared to pre-planned conditions at pre-change of direction (0.08 ± 0.28 m·s-1 and 0.42 ± 0.25 m·s-1, respectively and change of direction foot-strikes (0.25 ± 0.42 m·s-1 and 0.69 ± 0.43 m·s-1, respectively. Less lateral movement speed during reactive conditions was associated with greater lateral foot displacement (44.52 ± 6.10% leg length at the change of direction step compared to pre-planned conditions (41.35 ± 5.85%. Importantly, the anticipation abilities during reactive conditions provided a means to differentiate between speeds of agility performance, with faster performances displaying greater lateral movement speed at the change of direction foot- strike (0.52 ± 0.34 m·s-1 compared to moderate (0.20 ± 0.37 m·s-1 and slow (-0.08 ± 0.31 m·s-1. The changes to running technique during reactive conditions highlight the need to incorporate decision-making in rugby union agility programs

  10. A Technique to Facilitate Tooth Modification for Removable Partial Denture Prosthesis Guide Planes.

    Science.gov (United States)

    Haeberle, C Brent; Abreu, Amara; Metzler, Kurt

    2016-07-01

    The technique in this article was developed to provide a means to create prepared guide planes of proper dimension to ensure a more stable and retentive removable partial denture prosthesis (RPDP) framework when providing this service for a patient. Using commonly found clinical materials, a paralleling device can be fabricated from the modified diagnostic cast of the patient's dental arch requiring an RPDP. Polymethyl methacrylate or composite added to an altered thermoplastic form can be positioned intraorally and used as a guide to predictably adjust tooth structure for guide planes. Since it can potentially minimize the number of impressions and diagnostic casts made during the procedure, this can help achieve the desired result more efficiently and quickly for the patient. © 2015 by the American College of Prosthodontists.

  11. Surface Modification Technique of Cathode Materials for LI-ION Battery

    Science.gov (United States)

    Jia, Yongzhong; Han, Jinduo; Jing, Yan; Jin, Shan; Qi, Taiyuan

    Cathode materials for Li-ion battery LiMn2O4 and LiCo0.1Mn1.9O4 were prepared by soft chemical method. Carbon, which was made by decomposing organic compounds, was used as modifying agent. Cathode material matrix was mixed with water solution that had contained organic compound such as cane sugar, soluble amylum, levulose et al. These mixture were reacted at 150 200 °C for 0.5 4 h in a Teflon-lined autoclave to get a series of homogeneously C-coated cathode materials. The new products were analyzed by X-ray diffraction (XRD) and infrared (IR). Morphology of cathode materials was characterized by scanning electron microscope (SEM) and transition electron microscope (TEM). The new homogeneously C-coated products that were used as cathode materials of lithium-ion battery had good electrochemical stability and cycle performance. This technique has free-pollution, low cost, simpleness and easiness to realize the industrialization of the cathode materials for Li-ion battery.

  12. Surface modification by cold-plasma technique for dental implants—Bio-functionalization with binding pharmaceuticals

    Directory of Open Access Journals (Sweden)

    Masao Yoshinari

    2011-08-01

    At the bone tissue/implant interface, a thin calcium phosphate coating and rapid heating with infrared radiation were effective in controlling the dissolution without cracking the coating. These thin calcium phosphate coatings may directly promote osteogenisis, but also enable immobilization and subsequent drug delivery system (DDS of bisphosphonates. Simvastatin is also an effective candidate that is reported to increase the expression of BMP-2. The thin-film of hexamethyldisiloxane (HMDSO was plasma-polymerized onto titanium, and then HMDSO surface was activated by O2-plasma treatment. A quartz crystal microbalance (QCM-D technique demonstrated that simvastatin was immobilized on the plasma-treated surfaces due to introduction of O2-functional groups. At the soft tissue/implant interface, multi-grooved surface topographies and utilizing the adhesive proteins such as fibronectin or laminin-5 may help in providing a biological seal around the implant. At the oral fluid/implant interface, an alumina coating, F+-implantation and immobilization of anti-microbial peptides were responsible for inhibiting the biofilm accumulation.

  13. The influence of the PDMS technique in the study of the induced modifications of polymers used in nuclear environment; Apport de la technique PDMS a l`etude des modifications induites dans des polymeres utilises en ambiance nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Nsouli, B [Lyon-1 Univ., 69 - Villeurbanne (France). Inst. de Physique Nucleaire

    1995-07-20

    The PDMS technique (Particle Induced Desorption Mass Spectrometry) combined with a TOF detection (Time of Flight) is the main tool used in this study of polymer degradation in nuclear environment. Ar{sup 3+} ions with a 9 MeV energy have been used to induce the secondary ion emission, and the study was devoted to two stresses typical of this type of environment. The first part of the work concerned with the structural modifications induced by gamma irradiation on ion exchange resin, used for nuclear effluents reprocessing, namely the poly(4-vinylpyridine), or P-4PV. For such a material, the negative fragment emission is particularly sensitive to structural modifications. Difficult physical measurements in such an insoluble and infusible material (IR, UV - Vis, EPR, TGA, dielectric measurements) became consistent after the degradation mechanisms were elucidated. These effects, interpreted in terms of scissions and recombinations, enabled us to explicit different modes of energy deposition, and shed light on some discrepancies between SIMS and PDMS. The second part of the study is devoted to the thermal ageing of an elastomer, used in fabrication of valve gaskets submitted to high temperatures. First of all, we studied the constituents of the polymeric material, i. e. copolymer, homo polymers, and also additives. This last component proved useful to analyze, as a superficial lubricant layer can mask the conformational rearrangements which seem to occur after few hours of thermal treatment (PE blocks are prevailing at the surface). Here too, the PDMS information is important to account for static SIMS and ESCA results, as its probed layer thickness lies in-between. (author) 187 refs.

  14. The Effect of Vocal Hygiene and Behavior Modification Instruction on the Self-Reported Vocal Health Habits of Public School Music Teachers

    Science.gov (United States)

    Hackworth, Rhonda S.

    2007-01-01

    This study examined the effects of vocal hygiene and behavior modification instruction on self-reported behaviors of music teachers. Subjects (N = 76) reported daily behaviors for eight weeks: water consumption, warm-up, talking over music/noise, vocal rest, nonverbal commands, and vocal problems. Subjects were in experimental group 1 or 2, or the…

  15. Parental Presence/Absence in the Dental Operatory as a Behavior Management Technique: A Review and Modified View.

    Science.gov (United States)

    Riba, Hicham; Al-Shahrani, Asma; Al-Ghutaimel, Hayat; Al-Otaibi, Adel; Al-Kahtani, Salim

    2018-02-01

    Parental presence/absence in the dental operatory (also called: Parent-in-parent-out technique) is an extremely controversial aspect of the nonpharmacological BMTs. Historically, dentists used to exclude parents from dental operatory to avoid their interference with the dentist's aptitude to build a rapport and relationship with the child, hence increasing the child management problems by disrupting treatment and making the dentist unfocused and uncomfortable. The purpose of this article is to review and emphasize on the importance of parental presence/absence in the dental operatory, especially in a certain age group, as a behavior management technique (BMT) in pediatric dentistry, and to present a modified view of this technique. This article reviews the current literature concerning behavior management in pediatric dentistry. It includes a medline database search and review of the comprehensive textbooks in pediatric dentistry. Some recommendations were based on the opinions of experienced researchers and clinicians. Parent-in-parent-out technique in dental operatory is advocated to gain emotional support and avoid the effect of traumatic separation, especially in younger children or special health-care needs patients. The parent-in-parent-out technique in dental operatory is underused, or misused. This article clarifies the proper use of this technique along with a minor modification to it to make it more effective on young apprehensive dental patients.

  16. Expectancy, False Galvanic Skin Response Feedback, and Systematic Desensitization in the Modification of Phobic Behavior

    Science.gov (United States)

    Lick, John

    1975-01-01

    This study compared systematic desensitization and two pseudotherapy manipulations with and without false galvanic skin response feedback after every session suggesting improvement in the modification of intense snake and spider fear. The results indicated no consistent differences between the three treatment groups. (Author)

  17. Driver drowsiness detection using behavioral measures and machine learning techniques: A review of state-of-art techniques

    CSIR Research Space (South Africa)

    Ngxande, Mkhuseli

    2017-11-01

    Full Text Available This paper presents a literature review of driver drowsiness detection based on behavioral measures using machine learning techniques. Faces contain information that can be used to interpret levels of drowsiness. There are many facial features...

  18. Clinical and Ethical Implications for Teacher-Training in Behavior Modification.

    Science.gov (United States)

    Brion-Meisels, Linda

    The ethical issues concerning the use of behavioral procedures are founded on concerns relating to behavioral control. One major recurring ethical issue is that of coercion. The focus of this paper centers on the question: Ought behavioral programs to be employed even when they might be against the volition of the participant? A theoretical and…

  19. Behavior Modification for Obesity: The Evaluation of Exercise, Contingency Management, and Program Adherence.

    Science.gov (United States)

    And Others; Stalonas, Peter M., Jr.

    1978-01-01

    Investigated behavioral programs for obesity. Exercise and self-managed contingency components were compared using obese subjects who were evaluated after treatment and follow-up. Significant weight loss was observed at termination. The influence of exercise at follow-up was noticeable. Subjects engaged in behaviors, yet behaviors were not related…

  20. Risk perception, self-efficacy, trust for physician, depression, and behavior modification in diabetic patients.

    Science.gov (United States)

    Imai, Hissei; Furukawa, Toshiaki A; Hayashi, Shin-U; Goto, Atsushi; Izumi, Kazuo; Hayashino, Yasuaki; Noda, Mitsuhiko

    2018-03-01

    We evaluated the associations of risk perception, self-efficacy, and trust with two health promotion behaviors (food habits and exercise) and depressive mood. Diabetic patients aged between 40 and 64 ( n = 1195) were included in the analyses. Risk perception worsened behavioral changes in terms of food habits and depression, whereas self-efficacy and trust improved food habits, exercise, and depression; trust improved exercise and depression. In conclusion, self-efficacy and trust appear to be more beneficial than risk perception for positive behavioral changes and for improving depression in diabetic patients. However, their influence on behavioral changes may be different according to the types of behaviors.

  1. Effect of Behavior Modification on Outcome in Early- to Moderate-Stage Chronic Kidney Disease: A Cluster-Randomized Trial.

    Directory of Open Access Journals (Sweden)

    Kunihiro Yamagata

    Full Text Available Owing to recent changes in our understanding of the underlying cause of chronic kidney disease (CKD, the importance of lifestyle modification for preventing the progression of kidney dysfunction and complications has become obvious. In addition, effective cooperation between general physicians (GPs and nephrologists is essential to ensure a better care system for CKD treatment. In this cluster-randomized study, we studied the effect of behavior modification on the outcome of early- to moderate-stage CKD.Stratified open cluster-randomized trial.A total of 489 GPs belonging to 49 local medical associations (clusters in Japan.A total of 2,379 patients (1,195 in group A (standard intervention and 1,184 in group B (advanced intervention aged between 40 and 74 years, who had CKD and were under consultation with GPs.All patients were managed in accordance with the current CKD guidelines. The group B clusters received three additional interventions: patients received both educational intervention for lifestyle modification and a CKD status letter, attempting to prevent their withdrawal from treatment, and the group B GPs received data sheets to facilitate reducing the gap between target and practice.The primary outcome measures were 1 the non-adherence rate of accepting continuous medical follow-up of the patients, 2 the collaboration rate between GPs and nephrologists, and 3 the progression of CKD.The rate of discontinuous clinical visits was significantly lower in group B (16.2% in group A vs. 11.5% in group B, p = 0.01. Significantly higher referral and co-treatment rates were observed in group B (p<0.01. The average eGFR deterioration rate tended to be lower in group B (group A: 2.6±5.8 ml/min/1.73 m2/year, group B: 2.4±5.1 ml/min/1.73 m2/year, p = 0.07. A significant difference in eGFR deterioration rate was observed in subjects with Stage 3 CKD (group A: 2.4±5.9 ml/min/1.73 m2/year, group B: 1.9±4.4 ml/min/1.73 m2/year, p = 0.03.Our care

  2. The influence of the PDMS technique in the study of the induced modifications of polymers used in nuclear environment

    International Nuclear Information System (INIS)

    Nsouli, B.

    1995-01-01

    The PDMS technique (Particle Induced Desorption Mass Spectrometry) combined with a TOF detection (Time of Flight) is the main tool used in this study of polymer degradation in nuclear environment. Ar 3+ ions with a 9 MeV energy have been used to induce the secondary ion emission, and the study was devoted to two stresses typical of this type of environment. The first part of the work concerned with the structural modifications induced by gamma irradiation on ion exchange resin, used for nuclear effluents reprocessing, namely the poly(4-vinylpyridine), or P-4PV. For such a material, the negative fragment emission is particularly sensitive to structural modifications. Difficult physical measurements in such an insoluble and infusible material (IR, UV - Vis, EPR, TGA, dielectric measurements) became consistent after the degradation mechanisms were elucidated. These effects, interpreted in terms of scissions and recombinations, enabled us to explicit different modes of energy deposition, and shed light on some discrepancies between SIMS and PDMS. The second part of the study is devoted to the thermal ageing of an elastomer, used in fabrication of valve gaskets submitted to high temperatures. First of all, we studied the constituents of the polymeric material, i. e. copolymer, homo polymers, and also additives. This last component proved useful to analyze, as a superficial lubricant layer can mask the conformational rearrangements which seem to occur after few hours of thermal treatment (PE blocks are prevailing at the surface). Here too, the PDMS information is important to account for static SIMS and ESCA results, as its probed layer thickness lies in-between. (author)

  3. The effects of a pedometer-based behavioral modification program with telephone support on physical activity and sedentary behavior in type 2 diabetes patients.

    Science.gov (United States)

    De Greef, Karlijn P; Deforche, Benedicte I; Ruige, Johannes B; Bouckaert, Jacques J; Tudor-Locke, Catrine E; Kaufman, Jean-Marc; De Bourdeaudhuij, Ilse M

    2011-08-01

    Effectiveness of a behavioral modification program on physical activity (PA) and sedentary behavior in diabetes patients. Ninety-two patients were randomly assigned to an intervention or control group. The 24-weeks intervention consisted of a face-to-face session, pedometer and seven telephone follow-ups. Mean selection criteria were 35-75 years; 25-35 kg/m(2); ≤ 12% HbA1c, treated for type 2 diabetes; no PA limitations. PA and sedentary behavior were measured by pedometer, accelerometer and questionnaire over the short- (24 weeks) and intermediate- (1 year) term. The intervention group increased their steps/day by 2744, their total PA by 23 min/day (pbehavior by 23 min/day (pbehavior (pbehavioral modification program with telephone support showed lasting positive effects on steps/day, PA and sedentary behavior. This study tested a convenient way to increase PA among type 2 diabetes patients. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  4. Behavior change techniques in popular alcohol reduction apps: content analysis.

    Science.gov (United States)

    Crane, David; Garnett, Claire; Brown, James; West, Robert; Michie, Susan

    2015-05-14

    Mobile phone apps have the potential to reduce excessive alcohol consumption cost-effectively. Although hundreds of alcohol-related apps are available, there is little information about the behavior change techniques (BCTs) they contain, or the extent to which they are based on evidence or theory and how this relates to their popularity and user ratings. Our aim was to assess the proportion of popular alcohol-related apps available in the United Kingdom that focus on alcohol reduction, identify the BCTs they contain, and explore whether BCTs or the mention of theory or evidence is associated with app popularity and user ratings. We searched the iTunes and Google Play stores with the terms "alcohol" and "drink", and the first 800 results were classified into alcohol reduction, entertainment, or blood alcohol content measurement. Of those classified as alcohol reduction, all free apps and the top 10 paid apps were coded for BCTs and for reference to evidence or theory. Measures of popularity and user ratings were extracted. Of the 800 apps identified, 662 were unique. Of these, 13.7% (91/662) were classified as alcohol reduction (95% CI 11.3-16.6), 53.9% (357/662) entertainment (95% CI 50.1-57.7), 18.9% (125/662) blood alcohol content measurement (95% CI 16.1-22.0) and 13.4% (89/662) other (95% CI 11.1-16.3). The 51 free alcohol reduction apps and the top 10 paid apps contained a mean of 3.6 BCTs (SD 3.4), with approximately 12% (7/61) not including any BCTs. The BCTs used most often were "facilitate self-recording" (54%, 33/61), "provide information on consequences of excessive alcohol use and drinking cessation" (43%, 26/61), "provide feedback on performance" (41%, 25/61), "give options for additional and later support" (25%, 15/61) and "offer/direct towards appropriate written materials" (23%, 14/61). These apps also rarely included any of the 22 BCTs frequently used in other health behavior change interventions (mean 2.46, SD 2.06). Evidence was mentioned by 16

  5. Sandblasting as a surface modification technique on titanium alloys for biomedical applications: abrasive particle behavior

    International Nuclear Information System (INIS)

    Balza, J C; Zujur, D; Delvasto, P; Gil, L; Subero, R; Dominguez, E; Alvarez, J

    2013-01-01

    The present work shows the analysis of a sandblasting process using alumina abrasive particles on Ti-6Al-4V surfaces. The metallic samples were first characterized by optical microscopy (OM), revealing an α+β microstructure with a Widmanstätten morphology. Topography of the samples was assessed by scanning electron microscopy (SEM), before and after sandblasting. The Al 2 O 3 particles used had a granulometric distribution between 420 and 850 μm, with a median particle size (d50) of 670 μm, which decreased to 420 μm after sandblasting for 10 seconds. This change in the size of the particles generated a loss on particle kinetic energy by a factor of 3.5. Such variation on processing conditions induced a progressive increase on average roughness (Ra) of the Ti-6Al-4V surfaces, until the first 7 seconds were reached. From that point on, a reverse process was observed, exerting a polishing effect on the surface of the Ti-6Al-4V alloy.

  6. Behavior Modification of Studying Through Study Skills Advice and Self-Control Procedures

    Science.gov (United States)

    Richards, C. Steven

    1975-01-01

    Investigates the efficacy of two behavioral self-control procedures as additions to the typical treatment for college students' study behavior--study skills advice. Predicted self-monitoring would be an effective treatment addition to study skills advice and study skills advice would be superior to the control groups. Results supported…

  7. Behavioral and macro modeling using piecewise linear techniques

    NARCIS (Netherlands)

    Kruiskamp, M.W.; Leenaerts, D.M.W.; Antao, B.

    1998-01-01

    In this paper we will demonstrate that most digital, analog as well as behavioral components can be described using piecewise linear approximations of their real behavior. This leads to several advantages from the viewpoint of simulation. We will also give a method to store the resulting linear

  8. Outcomes of Direct Vision Internal Urethrotomy for Bulbar Urethral Strictures: Technique Modification with High Dose Triamcinolone Injection

    Directory of Open Access Journals (Sweden)

    Rishi Modh

    2015-01-01

    Full Text Available Objective. To evaluate the recurrence rate of bulbar urethral strictures managed with cold knife direct vision internal urethrotomy and high dose corticosteroid injection. Methods. 28 patients with bulbar urethral strictures underwent direct vision internal urethrotomy with high dose triamcinolone injection into the periurethral tissue and were followed up for recurrence. Results. Our cohort had a mean age of 60 years and average stricture length of 1.85 cm, and 71% underwent multiple previous urethral stricture procedures with an average of 5.7 procedures each. Our technique modification of high dose corticosteroid injection had a recurrence rate of 29% at a mean follow-up of 20 months with a low rate of urinary tract infections. In patients who failed treatment, mean time to stricture recurrence was 7 months. Patients who were successfully treated had significantly better International Prostate Symptom Scores at 6, 9, and 12 months. There was no significant difference in maximum flow velocity on Uroflowmetry at last follow-up but there was significant difference in length of follow-up (p=0.02. Conclusions. High dose corticosteroid injection at the time of direct vision internal urethrotomy is a safe and effective procedure to delay anatomical and symptomatic recurrence of bulbar urethral strictures, particularly in those who are poor candidates for urethroplasty.

  9. Outcomes of Direct Vision Internal Urethrotomy for Bulbar Urethral Strictures: Technique Modification with High Dose Triamcinolone Injection.

    Science.gov (United States)

    Modh, Rishi; Cai, Peter Y; Sheffield, Alyssa; Yeung, Lawrence L

    2015-01-01

    Objective. To evaluate the recurrence rate of bulbar urethral strictures managed with cold knife direct vision internal urethrotomy and high dose corticosteroid injection. Methods. 28 patients with bulbar urethral strictures underwent direct vision internal urethrotomy with high dose triamcinolone injection into the periurethral tissue and were followed up for recurrence. Results. Our cohort had a mean age of 60 years and average stricture length of 1.85 cm, and 71% underwent multiple previous urethral stricture procedures with an average of 5.7 procedures each. Our technique modification of high dose corticosteroid injection had a recurrence rate of 29% at a mean follow-up of 20 months with a low rate of urinary tract infections. In patients who failed treatment, mean time to stricture recurrence was 7 months. Patients who were successfully treated had significantly better International Prostate Symptom Scores at 6, 9, and 12 months. There was no significant difference in maximum flow velocity on Uroflowmetry at last follow-up but there was significant difference in length of follow-up (p = 0.02). Conclusions. High dose corticosteroid injection at the time of direct vision internal urethrotomy is a safe and effective procedure to delay anatomical and symptomatic recurrence of bulbar urethral strictures, particularly in those who are poor candidates for urethroplasty.

  10. Cognitive behaviour modification: a technique for teaching subtraction skills to hearing and deaf/hard-of-hearing elementary students.

    Science.gov (United States)

    Al-Hilawani, Y A

    2000-09-01

    The purpose of this study was to examine the influence of using the Cognitive Behaviour Modification (CBM) technique on the subtraction skills of third grade hearing and deaf/hard-of-hearing students. The results indicated that the CBM deaf/hard-of-hearing students and the CBM and non-CBM hearing students made more progress in solving the subtraction problems than the non-CBM deaf/hard-of-hearing students. The results also showed that there were no significant differences between the CBM deaf/hard-of-hearing and the non-CBM hearing students; and there were no significant differences between the CBM and non-CBM hearing students. The results revealed that the CBM hearing students achieved significantly higher post-test scores than the CBM deaf/hard-of-hearing students. However, the CBM deaf/hard-of-hearing students obtained a significantly higher gain score compared to the CBM and non-CBM hearing students. Implications for teachers and suggestions for future research are discussed in this paper.

  11. Surface Modification of Titanium with Heparin-Chitosan Multilayers via Layer-by-Layer Self-Assembly Technique

    International Nuclear Information System (INIS)

    Shu, Y.; Zou, J.; Ou, G.; Wang, L.; Li, Q.

    2011-01-01

    Extracellular matrix (ECM), like biomimetic surface modification of titanium implants, is a promising method for improving its biocompatibility. In this paper chitosan (Chi) and heparin (Hep) multilayer was coated on pure titanium using a layer-by-layer (LbL) self-assembly technique. The Hep-Chi multilayer growth was carried out by first depositing a single layer of positively charged poly-L-lysine (PLL) on the NaOH-treated titanium substrate (negatively charged surface), followed by alternate deposition of negatively charged Hep and positively charged Chi, and terminated by an outermost layer of Chi. The multilayer was characterized by DR-FTIR, SEM, and AFM, and osteoblasts were cocultured with the modified titanium and untreated titanium surfaces, respectively, to evaluate their cytocompatibility in vitro. The results confirmed that Hep-Chi multilayer was fabricated gradually on the titanium surface. The Hep-Chi multilayer-coated titanium improved the adhesion, proliferation and differentiation of osteoblasts. Thus, the approach described here may provide a basis for the preparation of modified titanium surfaces for use in dental or orthopedic implants

  12. Measurement of net nitrogen and phosphorus mineralization in wetland soils using a modification of the resin-core technique

    Science.gov (United States)

    Noe, Gregory B.

    2011-01-01

    A modification of the resin-core method was developed and tested for measuring in situ soil N and P net mineralization rates in wetland soils where temporal variation in bidirectional vertical water movement and saturation can complicate measurement. The modified design includes three mixed-bed ion-exchange resin bags located above and three resin bags located below soil incubating inside a core tube. The two inner resin bags adjacent to the soil capture NH4+, NO3-, and soluble reactive phosphorus (SRP) transported out of the soil during incubation; the two outer resin bags remove inorganic nutrients transported into the modified resin core; and the two middle resin bags serve as quality-control checks on the function of the inner and outer resin bags. Modified resin cores were incubated monthly for a year along the hydrogeomorphic gradient through a floodplain wetland. Only small amounts of NH4+, NO3-, and SRP were found in the two middle resin bags, indicating that the modified resin-core design was effective. Soil moisture and pH inside the modified resin cores typically tracked changes in the surrounding soil abiotic environment. In contrast, use of the closed polyethylene bag method provided substantially different net P and N mineralization rates than modified resin cores and did not track changes in soil moisture or pH. Net ammonification, nitrifi cation, N mineralization, and P mineralization rates measured using modified resin cores varied through space and time associated with hydrologic, geomorphic, and climatic gradients in the floodplain wetland. The modified resin-core technique successfully characterized spatiotemporal variation of net mineralization fluxes in situ and is a viable technique for assessing soil nutrient availability and developing ecosystem budgets.

  13. The behavior of various chemical forms of nickel in graphite furnace atomic absorption spectrometry under different chemical modification approaches

    International Nuclear Information System (INIS)

    Kowalewska, Zofia

    2012-01-01

    Various organic and inorganic Ni forms were investigated using graphite furnace atomic absorption spectrometry. Experiments without chemical modification showed a wide range of characteristic mass values for Ni (from 6.7 to 29 pg) and the importance of interaction with graphite. With the aim of achieving signal unification of organic Ni forms, different ways of chemical modification were tested. Some rules that govern the behavior of Ni were found and confirmed a significant role of the organic component of the analyte molecule in the analytical process. The application of air as an internal furnace gas in the pyrolysis phase and the Pd modifier injected with the sample solution improved the signal of porphyrins, while the application of iodine and methyltrioctylammonium chloride was required for organic compounds containing oxygen-bound Ni atoms. The Ni signal was strongly diminished when an aqueous solution containing hydrochloric acid was measured with the Pd modifier injected over the sample. Using the developed analytical methods, the range of characteristic mass values for various Ni forms totally dissolved in organic or aqueous solution was 6.5–7.9 pg. - Highlights: ► Some rules that govern behavior of organic Ni forms during GFAAS analysis were found. ► Interaction with graphite can significantly influence evaporation of porphyrins. ► Determination of Ni in form of porphyrins needs Pd organic modifier and air ashing. ► Determination of Ni in O-bound organic compounds needs pretreatment with I2+MTOACl. ► Chemical modification for GFAAS determination of Ni in HCl-containing solution.

  14. Abdominoplasty in prune belly syndrome: Modifications in Monfort technique to address variable patterns of abdominal wall weakness.

    Science.gov (United States)

    Smith, Edwin A; Srinivasan, Arun; Scherz, Hal C; Tracey, Anthony J; Broecker, Bruce; Kirsch, Andrew J

    2017-10-01

    Abdominoplasty is an important component of the management of children with prune belly syndrome (PBS). While there are features of the abdominal defect in PBS which are common to all patients, there will be differences unique to each patient that should be taken into consideration in surgical planning. Specifically, we have come to realize that although the Monfort procedure assumes a symmetric pattern of abdominal wall laxity, this symmetry is rarely present. The aim of this report is to describe our modifications and review our outcomes for the Monfort procedure which more completely address correction of the abdominal wall laxity including both common and uncommon features while positioning the umbilicus to a more anatomically correct position (Figure). Sixteen male patients with PBS and one female pseudoprune belly syndrome patient, aged 2-9 years, were treated at our institution between 2003 and 2014. Modifications incorporated into the abdominoplasty procedure for PBS applied to this study group included: 1) use of diagnostic laparoscopy to define the topography of the abdominal wall defect, 2) initial midline rather than elliptical skin incision to defer retailoring of the skin coverage until the final step of the procedure, 3) varying the width of the central plate to correct side to side asymmetry in redundancy, 4) plication of the central plate to reduce vertical redundancy and reposition the umbilicus, and 5) plication of focal areas of fascial weakness, most often in the flank region. All patients have improved abdominal wall contour with a more uniform correction of areas of weakness at a mean follow-up of 5.5 years (range 18 months-11.5 years). All patients and parents indicate that they are very satisfied with the outcome of their procedures without any revisions being performed. This study is descriptive in nature and retrospective, with the patient population treated in a relatively uniform fashion that does not allow direct comparison with other

  15. Surface modification of carbon/epoxy prepreg using oxygen plasma and its effect on the delamination resistance behavior of carbon/epoxy composites

    International Nuclear Information System (INIS)

    Kim, M.H.; Rhee, K.Y.; Kim, H.J.; Jung, D.H.

    2007-01-01

    It was shown in previous study that the fracture toughness of carbon/epoxy laminated composites could be significantly improved by modifying the surface of the prepreg using Ar + irradiation in an oxygen environment. In this study, the surface of carbon/epoxy prepreg was modified using an oxygen plasma to improve the delamination resistance behavior of carbon/epoxy laminated composites. The variation of the contact angle on the prepreg surface was determined as a function of the modification time, in order to determine the optimal modification time. An XPS analysis was conducted to investigate the chemical changes on the surface of the prepreg caused by the plasma modification. Mode I delamination resistance curves of the composites with and without surface modification were plotted as a function of the delamination increment. The results showed that the contact angle varied from ∼64 o to ∼47 o depending on the modification time and reached a minimum for a modification time of 30 min. The XPS analysis showed that the hydrophilic carbonyl C=O group was formed by the oxygen plasma modification. The results also showed that the delamination resistance behavior was significantly improved by the plasma modification of the prepreg. This improvement was caused by the better layer-to-layer adhesion as well as increased interfacial strength between the fibers and matrix

  16. Behavior change techniques in top-ranked mobile apps for physical activity.

    Science.gov (United States)

    Conroy, David E; Yang, Chih-Hsiang; Maher, Jaclyn P

    2014-06-01

    Mobile applications (apps) have potential for helping people increase their physical activity, but little is known about the behavior change techniques marketed in these apps. The aim of this study was to characterize the behavior change techniques represented in online descriptions of top-ranked apps for physical activity. Top-ranked apps (n=167) were identified on August 28, 2013, and coded using the Coventry, Aberdeen and London-Revised (CALO-RE) taxonomy of behavior change techniques during the following month. Analyses were conducted during 2013. Most descriptions of apps incorporated fewer than four behavior change techniques. The most common techniques involved providing instruction on how to perform exercises, modeling how to perform exercises, providing feedback on performance, goal-setting for physical activity, and planning social support/change. A latent class analysis revealed the existence of two types of apps, educational and motivational, based on their configurations of behavior change techniques. Behavior change techniques are not widely marketed in contemporary physical activity apps. Based on the available descriptions and functions of the observed techniques in contemporary health behavior theories, people may need multiple apps to initiate and maintain behavior change. This audit provides a starting point for scientists, developers, clinicians, and consumers to evaluate and enhance apps in this market. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  17. Effect of Ultrasonic Nano-Crystal Surface Modification (UNSM) on the Passivation Behavior of Aged 316L Stainless Steel.

    Science.gov (United States)

    Kim, Ki-Tae; Lee, Jung-Hee; Kim, Young-Sik

    2017-06-27

    Stainless steels have good corrosion resistance in many environments but welding or aging can decrease their resistance. This work focused on the effect of aging time and ultrasonic nano-crystal surface modification on the passivation behavior of 316L stainless steel. In the case of slightly sensitized 316L stainless steel, increasing the aging time drastically decreased the pitting potential, increased the passive current density, and decreased the resistance of the passive film, even though aging did not form chromium carbide and a chromium depletion zone. This behavior is due to the micro-galvanic corrosion between the matrix and carbon segregated area, and this shows the importance of carbon segregation in grain boundaries to the pitting corrosion resistance of stainless steel, in addition to the formation of the chromium depletion zone. UNSM (Ultrasonic Nano Crystal Surface Modification)-treatment to the slightly sensitized 316L stainless steel increased the pitting potential, decreased the passive current density, and increased the resistance of the passive film. However, in the case of heavily sensitized 316L stainless steel, UNSM-treatment decreased the pitting potential, increased the passive current density, and decreased the resistance of the passive film. This behavior is due to the dual effects of the UNSM-treatment. That is, the UNSM-treatment reduced the carbon segregation, regardless of whether the stainless steel 316L was slightly or heavily sensitized. However, since this treatment made mechanical flaws in the outer surface in the case of the heavily sensitized stainless steel, UNSM-treatment may eliminate chromium carbide, and this flaw can be a pitting initiation site, and therefore decrease the pitting corrosion resistance.

  18. Modification of motivational interviewing for use with people with mild intellectual disability and challenging behavior

    NARCIS (Netherlands)

    Frielink, N.; Embregts, P.J.C.M.

    2013-01-01

    Background Motivational interviewing is a promising method to increase treatment motivation for people with mild intellectual disability and challenging behaviour. The purpose of the present study was to identify how professionals could adapt motivational interviewing techniques for use with

  19. Using Behavior Change Techniques to Guide Selections of Mobile Applications to Promote Fluid Consumption.

    Science.gov (United States)

    Conroy, David E; Dubansky, Alexandra; Remillard, Joshua; Murray, Robert; Pellegrini, Christine A; Phillips, Siobhan M; Streeper, Necole M

    2017-01-01

    To determine the extent to which validated techniques for behavior change have been infused in commercially available fluid consumption applications (apps). Coders evaluated behavior change techniques represented in online descriptions for 50 fluid consumption apps and the latest version of each app. Apps incorporated a limited range of behavior change techniques (operating system but not as a function of whether apps were free or paid. Limitations include the lack of experimental evidence establishing the efficacy of these apps. Patients with urolithiasis can choose from many apps to support the recommended increase in fluid intake. Apps for iOS devices incorporate more behavior change techniques compared to apps for the Android operating system. Free apps are likely to expose patients to a similar number of techniques as paid apps. Physicians and patients should screen app descriptions for features to promote self-monitoring and provide feedback on discrepancies between behavior and a fluid consumption goal. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Modification of Anxious Behavior after Psychogenic Trauma and Treatment with Galanin Receptor Antagonist.

    Science.gov (United States)

    Lyudyno, V I; Tsikunov, S G; Abdurasulova, I N; Kusov, A G; Klimenko, V M

    2015-07-01

    Effects of blockage of central galanin receptors on anxiety manifestations were studied in rats with psychogenic trauma. Psychogenic trauma was modeled by exposure of a group of rats to the situation when the partner was killed by a predator. Antagonist of galanin receptors was intranasally administered before stress exposure. Animal behavior was evaluated using the elevated-plus maze test, free exploratory paradigm, and open-field test. Psychogenic trauma was followed by an increase in anxiety level and appearance of agitated behavior. Blockage of galanin receptors aggravated behavioral impairment, which manifested in the pathological anxious reactions - manifestations of hypervigilance and hyperawareness. The results suggest that endogenous pool of galanin is involved into prevention of excessive CNS response to stressful stimuli typical of posttraumatic stress disorder.

  1. Predicting malicious behavior tools and techniques for ensuring global security

    CERN Document Server

    Jackson, Gary M

    2012-01-01

    A groundbreaking exploration of how to identify and fight security threats at every level This revolutionary book combines real-world security scenarios with actual tools to predict and prevent incidents of terrorism, network hacking, individual criminal behavior, and more. Written by an expert with intelligence officer experience who invented the technology, it explores the keys to understanding the dark side of human nature, various types of security threats (current and potential), and how to construct a methodology to predict and combat malicious behavior. The companion CD demonstrates ava

  2. Comparison of remove-compute-restore and least squares modification of Stokes' formula techniques to quasi-geoid determination over the Auvergne test area

    DEFF Research Database (Denmark)

    Yildiz, H.; Forsberg, René; Ågren, J.

    2012-01-01

    The remove-compute-restore (RCR) technique for regional geoid determination implies that both topography and low-degree global geopotential model signals are removed before computation and restored after Stokes' integration or Least Squares Collocation (LSC) solution. The Least Squares Modification...... area. All methods showed a reasonable agreement with GPS-levelling data, in the order of a 3-3.5 cm in the central region having relatively smooth topography, which is consistent with the accuracies of GPS and levelling. When a 1-parameter fit is used, the FFT method using kernel modification performs...

  3. Modification of Personal Hygiene and Grooming Behaviors with Contingency Contracting: A Brief Review and Case Study.

    Science.gov (United States)

    Allen, Sarah J.; Kramer, Jack J.

    1990-01-01

    Presents discussion of basic components and characteristics of contingency contracts. Includes case study in which contingency contracting procedures were integrated within a behavioral consultation model used by a school psychologist consulting with a classroom teacher to modify personal hygiene of 12-year-old male. (Author/ABL)

  4. Cognitive-Behavioral Therapy for Anxiety in Children Diagnosed with Autism Spectrum Disorders: Modification Trends

    Science.gov (United States)

    Moree, Brittany N.; Davis, Thompson E., III

    2010-01-01

    Anxiety disorders have been found to be highly comorbid with autism spectrum disorders (ASDs). Even so, the identification and dissemination of empirically supported treatments for anxiety in adults or children who have ASD has lagged behind the larger evidence-based trend. This review examines the efficacy of cognitive-behavioral therapy as a…

  5. Behavior Modification of Aggressive Children in Child Welfare: Evaluation of a Combined Intervention Program

    Science.gov (United States)

    Nitkowski, Dennis; Petermann, Franz; Buttner, Peter; Krause-Leipoldt, Carsten; Petermann, Ulrike

    2009-01-01

    Children and adolescents with aggressive disorders are prevalent in child welfare settings. Therefore, the assumption is that child welfare services would benefit from a cognitive-behavioral intervention. This study investigates whether implementation of the training with aggressive children (TAC) could improve the outcome of child welfare. Twelve…

  6. Teaching Behavioral Modeling and Simulation Techniques for Power Electronics Courses

    Science.gov (United States)

    Abramovitz, A.

    2011-01-01

    This paper suggests a pedagogical approach to teaching the subject of behavioral modeling of switch-mode power electronics systems through simulation by general-purpose electronic circuit simulators. The methodology is oriented toward electrical engineering (EE) students at the undergraduate level, enrolled in courses such as "Power…

  7. Gestational stress induces persistent depressive-like behavior and structural modifications within the postpartum nucleus accumbens

    Science.gov (United States)

    Haim, Achikam; Sherer, Morgan; Leuner, Benedetta

    2015-01-01

    Postpartum depression (PPD) is a common complication following childbirth experienced by one in every five new mothers. Pregnancy stress enhances vulnerability to PPD and has also been shown to increase depressive-like behavior in postpartum rats. Thus, gestational stress may be an important translational risk factor that can be used to investigate the neurobiological mechanisms underlying PPD. Here we examined the effects of gestational stress on depressive-like behavior during the early/mid and late postpartum periods and evaluated whether this was accompanied by altered structural plasticity in the nucleus accumbens (NAc), a brain region that has been linked to PPD. We show that early/mid (PD8) postpartum female rats exhibited more depressive-like behavior in the forced swim test as compared to late postpartum females (PD22). However, two weeks of restraint stress during pregnancy increased depressive-like behavior regardless of postpartum timepoint. In addition, dendritic length, branching, and spine density on medium spiny neurons in the NAc shell were diminished in postpartum rats that experienced gestational stress although stress-induced reductions in spine density were evident only in early/mid postpartum females. In the NAc core, structural plasticity was not affected by gestational stress but late postpartum females exhibited lower spine density and reduced dendritic length. Overall, these data not only demonstrate structural changes in the NAc across the postpartum period, they also show that postpartum depressive-like behavior following exposure to gestational stress is associated with compromised structural plasticity in the NAc and thus may provide insight into the neural changes that could contribute to PPD. PMID:25359225

  8. Mediation and modification of genetic susceptibility to obesity by eating behaviors.

    Science.gov (United States)

    de Lauzon-Guillain, Blandine; Clifton, Emma Ad; Day, Felix R; Clément, Karine; Brage, Soren; Forouhi, Nita G; Griffin, Simon J; Koudou, Yves Akoli; Pelloux, Véronique; Wareham, Nicholas J; Charles, Marie-Aline; Heude, Barbara; Ong, Ken K

    2017-10-01

    Background: Many genetic variants show highly robust associations with body mass index (BMI). However, the mechanisms through which genetic susceptibility to obesity operates are not well understood. Potentially modifiable mechanisms, including eating behaviors, are of particular interest to public health. Objective: Here we explore whether eating behaviors mediate or modify genetic susceptibility to obesity. Design: Genetic risk scores for BMI (BMI-GRSs) were calculated for 3515 and 2154 adults in the Fenland and EDEN (Etude des déterminants pré et postnatals de la santé et du développement de l'enfant) population-based cohort studies, respectively. The eating behaviors-emotional eating, uncontrolled eating, and cognitive restraint-were measured through the use of a validated questionnaire. The mediating effect of each eating behavior on the association between the BMI-GRS and measured BMI was assessed by using the Sobel test. In addition, we tested for interactions between each eating behavior and the BMI-GRS on BMI. Results: The association between the BMI-GRS and BMI was mediated by both emotional eating (EDEN: P- Sobel = 0.01; Fenland: P- Sobel = 0.02) and uncontrolled eating (EDEN: P- Sobel = 0.04; Fenland: P -Sobel = 0.0006) in both sexes combined. Cognitive restraint did not mediate this association ( P -Sobel > 0.10), except among EDEN women ( P -Sobel = 0.0009). Cognitive restraint modified the relation between the BMI-GRS and BMI among men (EDEN: P -interaction = 0.0001; Fenland: P -interaction = 0.04) and Fenland women ( P -interaction = 0.0004). By tertiles of cognitive restraint, the association between the BMI-GRS and BMI was strongest in the lowest tertile of cognitive restraint, and weakest in the highest tertile. Conclusions: Genetic susceptibility to obesity was partially mediated by the "appetitive" eating behavior traits (uncontrolled and emotional eating) and, in 3 of the 4 population groups studied, was modified by cognitive restraint

  9. Different effects of bisphenol-A on memory behavior and synaptic modification in intact and estrogen-deprived female mice.

    Science.gov (United States)

    Xu, Xiaohong; Gu, Ting; Shen, Qiaoqiao

    2015-03-01

    Bisphenol-A (BPA) has the capability of interfering with the effects of estrogens on modulating brain function. The purpose of this study was to investigate the effects of BPA on memory and synaptic modification in the hippocampus of female mice under different levels of cycling estrogen. BPA exposure (40, 400 μg/kg/day) for 8 weeks did not affect spatial memory and passive avoidance task of gonadally intact mice but improved ovariectomy (Ovx)-induced memory impairment, whereas co-exposure of BPA with estradiol benzoate (EB) diminished the rescue effect of EB on memory behavior of Ovx mice. The results of morphometric measurement showed that BPA positively modified the synaptic interface structure and increased the synaptic density of CA1 pyramidal cell in the hippocampus of Ovx females, but inhibited the enhancement of EB on synaptic modification and synaptogenesis of Ovx mice. Furthermore, BPA up-regulated synaptic proteins synapsin I and PSD-95 and NMDA receptor NR2B but inhibited EB-induced increase in PSD-95 and NR2B in the hippocampus of Ovx mice. These results suggest that BPA interfered with normal hormonal regulation in synaptic plasticity and memory of female mice as a potent estrogen mimetic and as a disruptor of estrogen under various concentrations of cycling estrogen. © 2014 International Society for Neurochemistry.

  10. The effects of a novel hostile interpretation bias modification paradigm on hostile interpretations, mood, and aggressive behavior.

    Science.gov (United States)

    AlMoghrabi, Nouran; Huijding, Jorg; Franken, Ingmar H A

    2018-03-01

    Cognitive theories of aggression propose that biased information processing is causally related to aggression. To test these ideas, the current study investigated the effects of a novel cognitive bias modification paradigm (CBM-I) designed to target interpretations associated with aggressive behavior. Participants aged 18-33 years old were randomly assigned to either a single session of positive training (n = 40) aimed at increasing prosocial interpretations or negative training (n = 40) aimed at increasing hostile interpretations. The results revealed that the positive training resulted in an increase in prosocial interpretations while the negative training seemed to have no effect on interpretations. Importantly, in the positive condition, a positive change in interpretations was related to lower anger and verbal aggression scores after the training. In this condition, participants also reported an increase in happiness. In the negative training no such effects were found. However, the better participants performed on the negative training, the more their interpretations were changed in a negative direction and the more aggression they showed on the behavioral aggression task. Participants were healthy university students. Therefore, results should be confirmed within a clinical population. These findings provide support for the idea that this novel CBM-I paradigm can be used to modify interpretations, and suggests that these interpretations are related to mood and aggressive behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Effects of topographical and mechanical property alterations induced by oxygen plasma modification on stem cell behavior.

    Science.gov (United States)

    Yang, Yong; Kulangara, Karina; Lam, Ruby T S; Dharmawan, Rena; Leong, Kam W

    2012-10-23

    Polymeric substrates intended for cell culture and tissue engineering are often surface-modified to facilitate cell attachment of most anchorage-dependent cell types. The modification alters the surface chemistry and possibly topography. However, scant attention has been paid to other surface property alterations. In studying oxygen plasma treatment of polydimethylsiloxane (PDMS), we show that oxygen plasma treatment alters the surface chemistry and, consequently, the topography and elasticity of PDMS at the nanoscale level. The elasticity factor has the predominant effect, compared with the chemical and topographical factors, on cell adhesions of human mesenchymal stem cells (hMSCs). The enhanced focal adhesions favor cell spreading and osteogenesis of hMSCs. Given the prevalent use of PDMS in biomedical device construction and cell culture experiments, this study highlights the importance of understanding how oxygen plasma treatment would impact subsequent cell-substrate interactions. It helps explain inconsistency in the literature and guides preparation of PDMS-based biomedical devices in the future.

  12. Drastic modification of the piezoresistive behavior of polymer nanocomposites by using conductive polymer coatings

    KAUST Repository

    Ventura, Isaac Aguilar; Zhou, Jian; Lubineau, Gilles

    2015-01-01

    We obtained highly conductive nanocomposites by adding conductive polymer poly(3,4-ethylenedioxythiophene)poly(styrenesulfonate) (PEDOT/PSS)-coated carbon nanotubes (CNTs) to pristine insulating Polycarbonate. Because the PEDOT/PSS ensures efficient charge transfer both along and between the CNTs, we could attribute the improvement in electrical conductivity to coating. In addition to improving the electrical conductivity, the coating also modified the piezoresistive behavior of the nanocomposites compared to the material with pristine uncoated CNTs: whereas CNT/Polycarbonate samples exhibited a very strong piezoresistive effect, PEDOT/PSS-coated MWCNT/Polycarbonate samples exhibited very little piezoresistivity. We studied this change in piezoresistive behavior in detail by investigating various configurations of filler content. We investigated how this observation could be explained by changes in the microstructure and in the conduction mechanism in the interfacial regions between the nanofillers. Our study suggests that tailoring the piezoresistive response to specific application requirements is possible.

  13. Drastic modification of the piezoresistive behavior of polymer nanocomposites by using conductive polymer coatings

    KAUST Repository

    Ventura, Isaac Aguilar

    2015-07-21

    We obtained highly conductive nanocomposites by adding conductive polymer poly(3,4-ethylenedioxythiophene)poly(styrenesulfonate) (PEDOT/PSS)-coated carbon nanotubes (CNTs) to pristine insulating Polycarbonate. Because the PEDOT/PSS ensures efficient charge transfer both along and between the CNTs, we could attribute the improvement in electrical conductivity to coating. In addition to improving the electrical conductivity, the coating also modified the piezoresistive behavior of the nanocomposites compared to the material with pristine uncoated CNTs: whereas CNT/Polycarbonate samples exhibited a very strong piezoresistive effect, PEDOT/PSS-coated MWCNT/Polycarbonate samples exhibited very little piezoresistivity. We studied this change in piezoresistive behavior in detail by investigating various configurations of filler content. We investigated how this observation could be explained by changes in the microstructure and in the conduction mechanism in the interfacial regions between the nanofillers. Our study suggests that tailoring the piezoresistive response to specific application requirements is possible.

  14. Behaviors of Polymer Additives Under EHL and Influences of Interactions Between Additives on Friction Modification

    Science.gov (United States)

    Sakurai, T.

    1984-01-01

    Polymer additives have become requisite for the formulation of multigrade engine oils. The behavior of polymethacrylate (PMA)-thickened oils as lubricants in concentrated contacts under nominal rolling and pure sliding conditions was investigated by conventional optical interferometry. The PMA thickened oils behaved differently from the base oil in the formation of elastohydrodynamic (EHL) films. The higher the elastohydrodynamic molecular weight of the PMA contained in the lubricant, the thinner was the oil film under EHL conditions. The film thickness of shear-degraded PMA-thickened oils was also investigated. The behavior of graphite particles dispersed in both the base oil and the PMA-thickened oil was studied under pure sliding by taking photomicrographs. Many kinds of additives are contained in lubricating oil and the interactions between additives are considered. The interactions of zinc-organodithiophosphates (ZDP) with other additives is discussed.

  15. Behavioral and environmental modification of the genetic influence on body mass index: A twin study

    Science.gov (United States)

    Horn, Erin E.; Turkheimer, Eric; Strachan, Eric; Duncan, Glen E.

    2015-01-01

    Body mass index (BMI) has a strong genetic basis, with a heritability around 0.75, but is also influenced by numerous behavioral and environmental factors. Aspects of the built environment (e.g., environmental walkability) are hypothesized to influence obesity by directly affecting BMI, by facilitating or inhibiting behaviors such as physical activity that are related to BMI, or by suppressing genetic tendencies toward higher BMI. The present study investigated relative influences of physical activity and walkability on variance in BMI using 5,079 same-sex adult twin pairs (70% monozygotic, 65% female). High activity and walkability levels independently suppressed genetic variance in BMI. Estimating their effects simultaneously, however, suggested that the walkability effect was mediated by activity. The suppressive effect of activity on variance in BMI was present even with a tendency for low-BMI individuals to select into environments that require higher activity levels. Overall, our results point to community- or macro-level interventions that facilitate individual-level behaviors as a plausible approach to addressing the obesity epidemic among U.S. adults. PMID:25894925

  16. Effect of Cationic Surface Modification on the Rheological Behavior and Microstructure of Nanocrystalline Cellulose

    Directory of Open Access Journals (Sweden)

    Yanjun Tang

    2018-03-01

    Full Text Available In the present work, the microstructure and rheological behavior of nanocrystalline cellulose (NCC and cationically modified NCC (CNCC were comparatively studied. The resultant CNCC generally showed improved dispersion and higher thermal stability in comparison to the un-modified NCC. The rheological behavior demonstrated that the viscosity of the NCC suspension substantially decreased with the increasing shear rate (0.01–100 s−1, showing the typical characteristics of a pseudoplastic fluid. In contrast, the CNCC suspensions displayed a typical three-region behavior, regardless of changes in pH, temperature, and concentration. Moreover, the CNCC suspensions exhibited higher shear stress and viscosity at a given shear rate (0.01–100 s−1 than the NCC suspension. Meanwhile, the dynamic viscoelasticity measurements revealed that the CNCC suspensions possessed a higher elastic (G′ and loss modulus (G″ than NCC suspensions over the whole frequency range (0.1–500 rad·s−1, providing evidence that the surface cationization of NCC makes it prone to behave as a gel-like structure.

  17. Entrepreneurial behavior : New perspectives gained through the critical incident technique

    NARCIS (Netherlands)

    Nandram, S.S.; Samsom, K.J.

    2007-01-01

    Responding to criticism of the trait approach in studying entrepreneurship, a process and context oriented methodology was applied using the Critical Incident Technique (CIT) in predicting success and failure. The actions of entrepreneurs were subsequently translated into (1) dynamic traits with a

  18. Evaluation of footprint contact area and pressure using a triple-row modification of the suture-bridge technique for rotator cuff repair.

    Science.gov (United States)

    Ostrander, Roger V; McKinney, Bart I

    2012-10-01

    Studies suggest that arthroscopic repair techniques may have high recurrence rates for larger rotator cuff tears. A more anatomic repair may improve the success rate when performing arthroscopic rotator cuff repair. We hypothesized that a triple-row modification of the suture-bridge technique for rotator cuff repair would result in significantly more footprint contact area and pressure between the rotator cuff and the humeral tuberosity. Eighteen ovine infraspinatus tendons were repaired using 1 of 3 simulated arthroscopic techniques: a double-row repair, the suture-bridge technique, and a triple-row repair. The triple-row repair technique is a modification of the suture-bridge technique that uses an additional reducing anchor between the medial and lateral rows. Six samples were tested per group. Pressure-indicating film was used to measure the footprint contact area and pressure after each repair. The triple-row repair resulted in significantly more rotator cuff footprint contact area and contact pressure compared with the double-row technique and the standard suture-bridge technique. No statistical difference in contact area or contact pressure was found between the double-row technique and the suture-bridge technique. The triple-row technique for rotator cuff repair results in significantly more footprint contact area and contact pressure compared with the double-row and standard suture-bridge techniques. This more anatomic repair may improve the healing rate when performing arthroscopic rotator cuff repair. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

  19. Image Analysis Technique for Material Behavior Evaluation in Civil Structures

    Science.gov (United States)

    Moretti, Michele; Rossi, Gianluca

    2017-01-01

    The article presents a hybrid monitoring technique for the measurement of the deformation field. The goal is to obtain information about crack propagation in existing structures, for the purpose of monitoring their state of health. The measurement technique is based on the capture and analysis of a digital image set. Special markers were used on the surface of the structures that can be removed without damaging existing structures as the historical masonry. The digital image analysis was done using software specifically designed in Matlab to follow the tracking of the markers and determine the evolution of the deformation state. The method can be used in any type of structure but is particularly suitable when it is necessary not to damage the surface of structures. A series of experiments carried out on masonry walls of the Oliverian Museum (Pesaro, Italy) and Palazzo Silvi (Perugia, Italy) have allowed the validation of the procedure elaborated by comparing the results with those derived from traditional measuring techniques. PMID:28773129

  20. Contemporary behavior management techniques in clinical pediatric dentistry: out with the old and in with the new?

    Science.gov (United States)

    Oliver, Kelly; Manton, David John

    2015-01-01

    Effective behavior management guides children through the complex social context of dentistry utilizing techniques based on a current understanding of the social, emotional, and cognitive development of children. Behavior management techniques facilitate effective communication and establish social and behavioral guidelines for the dental environment. Contemporary parenting styles, expectations, and attitudes of modern parents and society have influenced the use of behavior management techniques with a prevailing emphasis on communicative techniques and pharmacological management over aversive techniques.

  1. Spilled oil and infaunal activity - Modification of burrowing behavior and redistribution of oil

    Science.gov (United States)

    Clifton, H.E.; Kvenvolden, K.A.; Rapp, J.B.

    1984-01-01

    A series of experiments in Willapa Bay, Washington, indicates the degree to which the presence of spilled oil modifies the burrowing behavior of infauna and the extent to which the animals redistribute oil into intertidal sediment. Small amounts of North Slope crude oil introduced at low tide directly into burrow openings (mostly made by the crustacean Callianassa) resulted in a limited and temporary reduction in the number of burrow openings. In contrast, a layer of oil-saturated sand 1 cm thick buried about 5 cm below the sediment surface sharply reduced the number of burrow openings. After a year, the few new burrows penetrated only the margins of the experimental plot, and bioturbation below the buried oil-saturated sand layer declined dramatically. The experiments suggest that small amounts of oil temporarily stranded by tides in themselves have no long-range effect on burrowing behavior. The fauna, however, are capable of introducing measurable amounts of oil into the subsurface, where it is retained long after the rest of the stranded oil had washed away. A buried layer of oil-saturated sand greatly reduces infaunal activity; the oil presents an effective barrier that can persist for years. The oil incorporated into the sediment from burrow openings showed evidence of degradation after 7 months. In contrast the layer of buried oil remained essentially undergraded after a period of two years, even though oil in lower concentrations above the layer was degraded after a period of one year. This variation in degree of degradation of the buried oil, as well as the heterogeneity of oil distribution wherever the oil has been incorporated from the surface, emphasises the importance of careful sampling in any attempt to locate or monitor the presence of spilled oil in the substrate.In a series of experiments in Willapa Bay, Washington, small amounts of North Slope crude oil introduced at low tide directly into burrow openings resulted in a limited and temporary

  2. Efficacy of dietary behavior modification for preserving cardiovascular health and longevity.

    Science.gov (United States)

    Pryde, Moira McAllister; Kannel, William Bernard

    2010-12-28

    Cardiovascular disease (CVD) and its predisposing risk factors are major lifestyle and behavioral determinants of longevity. Dietary lifestyle choices such as a heart healthy diet, regular exercise, a lean weight, moderate alcohol consumption, and smoking cessation have been shown to substantially reduce CVD and increase longevity. Recent research has shown that men and women who adhere to this lifestyle can substantially reduce their risk of coronary heart disease (CHD). The preventive benefits of maintaining a healthy lifestyle exceed those reported for using medication and procedures. Among the modifiable preventive measures, diet is of paramount importance, and recent data suggest some misconceptions and uncertainties that require reconsideration. These include commonly accepted recommendations about polyunsaturated fat intake, processed meat consumption, fish choices and preparation, transfatty acids, low carbohydrate diets, egg consumption, coffee, added sugar, soft drink beverages, glycemic load, chocolate, orange juice, nut consumption, vitamin D supplements, food portion size, and alcohol.

  3. Efficacy of Dietary Behavior Modification for Preserving Cardiovascular Health and Longevity

    Directory of Open Access Journals (Sweden)

    Moira McAllister Pryde

    2011-01-01

    Full Text Available Cardiovascular disease (CVD and its predisposing risk factors are major lifestyle and behavioral determinants of longevity. Dietary lifestyle choices such as a heart healthy diet, regular exercise, a lean weight, moderate alcohol consumption, and smoking cessation have been shown to substantially reduce CVD and increase longevity. Recent research has shown that men and women who adhere to this lifestyle can substantially reduce their risk of coronary heart disease (CHD. The preventive benefits of maintaining a healthy lifestyle exceed those reported for using medication and procedures. Among the modifiable preventive measures, diet is of paramount importance, and recent data suggest some misconceptions and uncertainties that require reconsideration. These include commonly accepted recommendations about polyunsaturated fat intake, processed meat consumption, fish choices and preparation, transfatty acids, low carbohydrate diets, egg consumption, coffee, added sugar, soft drink beverages, glycemic load, chocolate, orange juice, nut consumption, vitamin D supplements, food portion size, and alcohol.

  4. MODIFICATION OF SEA ANEMONE BEHAVIOR BY SYMBIOTIC ZOOXANTHELLAE: EXPANSION AND CONTRACTION.

    Science.gov (United States)

    Pearse, Vicki Buchsbaum

    1974-12-01

    The pattern of expansion and contraction by the sea anemone Anthopleura elegantissima differs in individuals with or without endosymbiotic zooxanthellae. Anemones without zooxanthellae, found in dark habitats, do not regularly expand or contract under changes in light. Anemones with zooxanthellae expand in moderate light and contract in intense light or in darkness, with striking uniformity. However, this behavior does not always depend directly on the presence of zooxanthellae. Anemones that have previously had endosymbiotic zooxanthellae subsequently expand and contract with changes in light in the absence of these algae. Thus, conditioned responses may be involved. It is suggested that expansion and contraction of the anemones may play an important role in favorably regulating the amount of light to which their zooxanthellae are exposed.

  5. An expectancy-value theory approach to the long-term modification of smoking behavior.

    Science.gov (United States)

    Rogers, R W; Deckner, C W; Mewborn, C R

    1978-04-01

    Despite the research interest in modifying smoking behavior, therapeutic treatments that can produce long-term cessation have not been demonstrated rigorously. A follow-up study of two attitude change experiments (N = 173) examined the effects of a fear appeal, that is, increasing smokers' awareness and appreciation of the highly noxious consequences of smoking. Although this familiar type of information may be an integral component of many smoking treatment programs, its long-term suppressive effect has not been demonstrated in well-controlled experiments. The results disclosed that 3 months and also 1 year after treatment, a high-fear manipulation had increased significantly the percentage of smokers who were able to stop smoking completely.

  6. Photochemical modification of diamond powder with sulfur functionalities and its behavior on gold surfaces

    International Nuclear Information System (INIS)

    Nakamura, T; Ohana, T; Hagiwara, Y; Tsubota, T

    2010-01-01

    A useful method of modifying the surface of diamond powders with sulfur-containing functionalities was developed by the use of the photolysis of elemental sulfur. The introduction of sulfur-containing functional groups on the diamond surfaces was confirmed by means of XPS, DRIFT and mass spectroscopy analyses. The sulfur-modified diamond powders exhibited surface-attachment behavior to gold surfaces through the sulfur-containing linkage. In brief, exposure of the modified diamond powders to gold colloids resulted in gold nanoparticles being attached to the diamond powders. Treatment of the modified diamond powders with gold thin film on Si substrate afforded alignment of surface-attached diamond powders through sulfur linkages by self-assembly.

  7. Mediators of physical activity change in a behavioral modification program for type 2 diabetes patients

    Directory of Open Access Journals (Sweden)

    Tudor-Locke Catrine E

    2011-09-01

    Full Text Available Abstract Background Many studies have reported significant behavioral impact of physical activity interventions. However, few have examined changes in potential mediators of change preceding behavioral changes, resulting in a lack of information concerning how the intervention worked. Our purpose was to examine mediation effects of changes in psychosocial variables on changes in physical activity in type 2 diabetes patients. Methods Ninety-two patients (62 ± 9 years, 30, 0 ± 2.5 kg/m2, 69% males participated in a randomized controlled trial. The 24-week intervention was based on social-cognitive constructs and consisted of a face-to-face session, telephone follow-ups, and the use of a pedometer. Social-cognitive variables and physical activity (device-based and self-reported were collected at baseline, after the 24-week intervention and at one year post-baseline. PA was measured by pedometer, accelerometer and questionnaire. Results Post-intervention physical activity changes were mediated by coping with relapse, changes in social norm, and social modeling from family members (p ≤ 0.05. One-year physical activity changes were mediated by coping with relapse, changes in social support from family and self-efficacy towards physical activity barriers (p ≤ 0.05 Conclusions For patients with type 2 diabetes, initiatives to increase their physical activity could usefully focus on strategies for resuming regular patterns of activity, on engaging family social support and on building confidence about dealing with actual and perceived barriers to activity. Trial Registration NCT00903500, ClinicalTrials.gov.

  8. [Effects of applying behavior modification to improve HbA1C levels in a diabetic patient].

    Science.gov (United States)

    Chen, Wen-Chun; Huang, You-Rong; Lin, Chiu-Chu

    2010-04-01

    Diabetes is a chronic disease. To prevent and delay complications, diabetic patients must adjust their lifestyle as part of a comprehensive approach to disease control. Diabetic patients must be able to self-manage their disease and establish healthy habits in their daily routine. In this study, prior to intervention, the subject was unable to control her diet, do exercise, check sugars properly or integrate disease management effectively into her daily routine. By applying self-regulation theory through the keeping of a diary for sugar and daily activity self-monitoring, she became able to self-assess the causes of poor disease control. Such further facilitated her setting goals and developing strategies to link her habits with disease management. When failing to achieve goals even after execution, she could consider the factors contributing to the failure and modify her behaviors, goals and/or strategies accordingly. We helped this patient learn behavior modification methods in order to achieve her goal of better HbA(1)C control. This case example may help clinical nursing educators move beyond the confines of the traditional one-way educational model to guide diabetic patients to achieve good sugar control. We hope our findings help many chronic disease sufferers achieve self-management objectives in order to assume greater self-care responsibilities.

  9. Effectiveness of audiovisual distraction in behavior modification during dental caries assessment and sealant placement in children with autism spectrum disorder.

    Science.gov (United States)

    Fakhruddin, Kausar Sadia; El Batawi, Hisham Yehia

    2017-01-01

    The aim of this study was to evaluate the effectiveness of audiovisual (AV) distraction in behavior modification during dental caries assessment and sealant placement in children with autism spectrum disorder. This study was conducted on 28 children diagnosed with autism spectrum disorder, aged 6.5-9.8 years. Children underwent one introductory (desensitization) appointment and three treatment sessions. During the introductory session, children had the procedures explained to them, they watched a movie projected on a screen while oral screening and assessment of cooperation level were carried out. In treatment session I, oral examination, charting, and dental x-rays were undertaken, whereas the children watched movies with or without video eyewear. During treatment sessions II/III, dental prophylaxis was carried out on upper and lower jaws in addition to the application of dental sealants on the right upper and lower and the left upper and lower permanent molars, respectively, while the children were distracted by cartoon movies using video eyewear. Changes in pulse oximeter and heart rate were recorded every 5 min. Independent samples t -test was used to assess the significance of changes in pulse and O 2 saturation levels during each visit. International Caries Detection and Assessment System-code 2 was found to be the most prevalent ( n = 58; 52%). A significant difference ( P behavior in the subjects. Video eyewear distraction proved an effective tool in managing children with autism spectrum disorder during noninvasive preventive dental procedures.

  10. Effect of chemical modification on behavior of various organic vanadium forms during analysis by electrothermal atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Kowalewska, Zofia

    2007-01-01

    The behavior of various organic V forms dissolved in xylene during analysis by electrothermal atomic absorption spectrometry (ETAAS) was compared. The investigated analyte forms included compounds with vanadium at the oxidation state III, IV or V, as well as N, O or S atoms in molecules. Another group consisted of petroleum products containing naturally-occurring V species. Although the characteristic mass determined under different analytical conditions was in the very wide range from 11 up to 55 pg, some rules of V behavior were found. In the case of porphyrins and petroleum products, the application of Pd as a chemical modifier (xylene solution of Pd(II) acetylacetonate) seemed to be crucial. It was shown that Pd must be introduced to a furnace together with a sample. Pd injected and thermally pretreated before the sample injection was less effective for porphyrins and the petroleum products, but it increased signals of V compounds containing O as donor atom. The iodine pretreatment followed by the methyltrioctylammonium chloride (MTOACl) pretreatment was advantageous for these V forms. The air ashing in a graphite tube appeared to be important to improve decomposition of the petroleum products. No significant influence of the V oxidation state on the analytical signal was observed. The behavior of V contained in two Conostan oil standards, the single-element and the S21 multielement standard, was different in many situations. Probably, the joint action of other elements is responsible for this effect. In general, chemical modification was applied in the work for two reasons: to reduce the V volatility (in some cases losses at about 300 deg. C were observed) and to enhance the atomization efficiency. For routine analysis air ashing, modification by Pd introduced into the furnace together with the sample solution and petroleum products with known V content as standard is recommended. Using this procedure the characteristic mass varied from 16 to 19 pg for

  11. [Educational effectiveness of a group health education program in the workplace and an examination of educational methods to promote behavior modification].

    Science.gov (United States)

    Kageyama, Makoto; Odagiri, Keiichi; Suzuki, Naoko; Honda, Kumiko; Onoue, Kazue; Yamamoto, Makoto; Mizuta, Isagi; Uehara, Akihiko

    2014-01-01

    It is well-known that health education programs carried out in the work place are useful for employees' health promotion. However, the effectiveness of group health education programs for workers as a population approach is unclear. The purpose of this study was to examine the effectiveness of a group health education program in the workplace, and to investigate educational methods which support workers modifying their health behaviors. A total of 289 workers who received a group health education program in the manufacturing industry (mean age, 42.1 ± 11.3 years old; 175 males and 114 females) were enrolled in this study. The group health education program was carried out to educate the subjects about periodontitis, oral health actions and lifestyle behaviors to prevent oral diseases. Participants were required to fill out a self-administered questionnaire which included information about oral health knowledge, oral health actions, lifestyle behaviors and symptoms of periodontitis before, immediately after and one month after the education. We used McNemar's test for the paired comparison of questionnaire responses. The relation between acquiring knowledge about periodontitis and subjects' modification of oral health action, behavior modification and symptoms of periodontitis were examined using the chi-squared test. The relationships of knowledge retention about periodontitis, the modification of the oral health actions and lifestyle behaviors (i.e., cigarette smoking, alcohol drinking and eating between meals), were examined with participants' characteristics (i.e., age, gender and occupational category) using Fisher's exact test. Knowledge about periodontitis significantly improved immediately after receiving the health education, and this effect of education was evident one month later. However, not all of the knowledge was sufficiently retained one month after the education session. The proportion of participants undertaking desirable oral health actions

  12. Which Behavior Change Techniques May Help Waterpipe Smokers to Quit? An Expert Consensus Using a Modified Delphi Technique.

    Science.gov (United States)

    O'Neill, Nancy; Dogar, Omara; Jawad, Mohammed; Kellar, Ian; Kanaan, Mona; Siddiqi, Kamran

    2018-01-05

    Waterpipe smoking is addictive and harmful. The determinants of waterpipe smoking may differ from those of cigarette smoking; therefore, behavioral approaches to support quitting may also differ between these two tobacco products. While some evidence exists on effective behavioral change techniques (BCTs) to facilitate cigarette smoking cessation, there is little research on waterpipe smoking cessation. Twenty-four experts were selected from the author lists of peer-reviewed, randomized controlled trials on waterpipe smoking cessation. They were invited to two rounds of a consensus development exercise using modified Delphi technique. Experts ranked 55 BCTs categorized further into those that promote; "awareness of harms of waterpipe smoking and advantages of quitting" (14), "preparation and planning to quit" (29), and "relapse prevention and sustaining an ex-smoker identity" (12) on their potential effectiveness. Kendall's W statistics was used to assess agreement. Fifteen experts responded in round 1 and 14 completed both rounds. A strong consensus was achieved for BCTs that help in "relapse prevention and sustaining ex-smoker identity" (w = 0.7; p consequences of waterpipe smoking and its cessation, assessing readiness and ability to quit, and making people aware of the withdrawal symptoms, were the three highest-ranking BCTs. Based on expert consensus, an inventory of BCTs ordered for their potential effectiveness can be useful for health professionals offering cessation support to waterpipe smokers. Waterpipe smoking is addictive, harmful, and gaining global popularity, particularly among youth. An expert consensus on behavior change techniques, likely to be effective in supporting waterpipe smokers to quit, has practice and research implications. Smoking cessation advisors can use these techniques to counsel waterpipe smokers who wish to quit. Behavioral and public health scientists can also use these to develop and evaluate behavioral support interventions

  13. Modification of the feeding behavior of dairy cows through live yeast supplementation.

    Science.gov (United States)

    DeVries, T J; Chevaux, E

    2014-10-01

    The objective of this study was to determine if the feeding behavior of dairy cows is modified through live yeast supplementation. Twelve lactating Holstein dairy cows (2 primiparous and 10 multiparous) were individually exposed, in a replicated crossover design, to each of 2 treatment diets (over 35-d periods): (1) a control TMR and (2) a control TMR plus 1 × 10(10) cfu/head per day of live yeast (Saccharomyces cerevisiae CNCM I-1077; Levucell SC20; Lallemand Animal Nutrition, Montreal, QC, Canada). Milk production, feeding, and rumination behavior were electronically monitored for each animal for the last 7 d of each treatment period. Milk samples were collected for the last 6 d of each period for milk component analysis. Dry matter intake (28.3 kg/d), eating time (229.3 min/d), and rate (0.14 kg of dry matter/min) were similar between treatments. With yeast supplementation, meal criteria (minimum intermeal interval) were shorter (20.0 vs. 25.8 min), translating to cows tending to have more meals (9.0 vs. 7.8 meals/d), which tended to be smaller in size (3.4 vs. 3.8 kg/meal). Yeast-supplemented cows also tended to ruminate longer (570.3 vs. 544.9 min/d). Milk yield (45.8 kg/d) and efficiency of production (1.64 kg of milk/kg of dry matter intake) were similar between treatments. A tendency for higher milk fat percent (3.71 vs. 3.55%) and yield (1.70 vs. 1.63 kg/d) was observed when cows were supplemented with yeast. No differences in milk fatty acid composition were observed, with the exception of a tendency for a greater concentration of 18:2 cis-9,cis-12 fatty acid (2.71 vs. 2.48% of total fatty acids) with yeast supplementation. Yeast-supplemented cows had lower mean ruminal temperature (38.4 vs. 38.5 °C) and spent less time with rumen temperature above 39.0 °C (353.1 vs. 366.9 min/d), potentially indicating improved rumen pH conditions. Overall, the results show that live yeast supplementation tended to improve meal patterns and rumination, rumen

  14. Modification of boundary plasma behavior by Ion Bernstein Wave heating on HT-7 tokamak

    International Nuclear Information System (INIS)

    Xu Guoshen

    2002-01-01

    Cooperated with Fusion Research Center, the University of Texas at Austin, U.S.A. The boundary plasma behavior during Ion Bernstein Wave (IBW) heating was investigated using Langmuir probe arrays on HT-7 tokamak. The particle confinement improvement of over a factor of 2 was observed in 30 MHz IBW heated plasma with RF power > 120 kW. The strong de-correlation effect of fluctuations resulted in that the turbulent particle flux dropped more than an order of magnitude. In IBW heated plasma, an additional inward E r and associated poloidal ExB flows were produced, which could account for the additional poloidal velocity in the electron diamagnetic direction in the scrape-of layer (SOL). Three-wave nonlinear phase coupling increased evidently and low frequency fluctuations (about 5 kHz) were generated, which dominated the boundary turbulence during IBW heating. The 5/2-D resonant layer was located in the plasma edge region, which is found to be the mechanism underlying these phenomena. (author)

  15. Sodium Silicate Behavior in Porous Media Applied for In-Depth Profile Modifications

    Directory of Open Access Journals (Sweden)

    Hossein A. Akhlaghi Amiri

    2014-03-01

    Full Text Available This paper addresses alkaline sodium silicate (Na-silicate behavior in porous media. One of the advantages of the Na-silicate system is its water-like injectivity during the placement stage. Mixing Na-silicate with saline water results in metal silicate precipitation as well as immediate gelation. This work demonstrated that low salinity water (LSW, sea water diluted 25 times could be used as a pre-flush in flooding operations. A water override phenomenon was observed during gel formation which is caused by gravity segregation. Dynamic adsorption tests in the sand-packed tubes showed inconsiderable adsorbed silicon density (about 8.5 × 10−10 kg/cm3 for a solution with 33 mg/L silicon content, which is less than the estimated mono-layer adsorption density of 1.4 × 10−8 kg/cm3. Na-silicate enhanced water sweep efficiency after application in a dual-permeability sand-pack system, without leak off into the oil-bearing low permeability (LP zone. Field-scale numerical sensitivity studies in a layered reservoir demonstrated that higher permeability and viscosity contrasts and lower vertical/horizontal permeability ratio result in lower Na-silicate leakoff into the matrix. The length of the mixing zone between reservoir water and the injected Na-silicate solution, which is formed by low salinity pre-flush, acts as a buffer zone.

  16. Study of Lactic Acid Thermal Behavior Using Thermoanalytical Techniques

    Directory of Open Access Journals (Sweden)

    Andrea Komesu

    2017-01-01

    Full Text Available Actually, there is a growing interest in the biotechnological production of lactic acid by fermentation aiming to substitute fossil fuel routes. The development of an efficient method for its separation and purification from fermentation broth is very important to assure the economic viability of production. Due to its high reactivity and tendency to decompose at high temperatures, the study of lactic acid thermal behavior is essential for its separation processes and potential application. In the present study, differential scanning calorimetry (DSC analyses showed endothermic peaks related to the process of evaporation. Data of thermogravimetry (TG/DTG were correlated to Arrhenius and Kissinger equations to provide the evaporation kinetic parameters and used to determine the vaporization enthalpy. Activation energies were 51.08 and 48.37 kJ·mol−1 and frequency values were 859.97 and 968.81 s−1 obtained by Arrhenius and Kissinger equations, respectively. Thermogravimetry, coupled with mass spectroscopy (TG-MS, provided useful information about decomposition products when lactic acid was heated at 573 K for approximately 30 min.

  17. Effectiveness of attentional bias modification and cognitive behavioral therapy on the reduction of pain intensity in patients with chronic pain

    Directory of Open Access Journals (Sweden)

    Fateme Babai

    2016-08-01

    Full Text Available The aim of the study was to determine the effectiveness of Attentional Bias Modification (ABM and Cognitive Behavioral Therapy (CBT on the reduction of pain intensityin patients with chronic pain. This study was a quasiexperimental pretest-posttest design with control group. All patients who referred to physiotherapy clinics for pain during 2015 were participated in the study. They completed the Brief Pain Inventory-short form (BPI-SF for assessing severity of pain. Attentional bias was evaluated using computerized Dot-Probe task. The patients with chronic pain were screened by diagnostic criteria of DSM-V; neurologic diagnosis, and interview. 36 people were selected and randomly divided to three groups computer-based ABM, CBT, and control (12 cases in each group. Group A was trained in 8 sessions-each 15 minutes with the modified computerized Dot-Probe task for attentional bias modification. Group B was trained in 11 sessions-each 45 minutes with CBT program of Turk and Ferry for the chronic pain treatment. And Placebo program was administered for group C in which they completed 8 classic DotProbe sessions. In the end, for the posttest (T2 the participants were tested to identify the changes in biased attention to the emotional stimuli using classing Dot-Probe tasks, and BPI questionnaire to evaluate the changes of severity of pain. Data were analyzed using one-way variance analysis(ANOVA. On the BPI-SF, CBT more reduced the pain intensitythan computer-based ABM.In addition ABM treatment is more effective in reduction of attentional bias.Both of treatments are effective but CBT is more effective than ABM in reduction of pain intensity.

  18. Algorithm and interface modifications of the NOAA oil spill behavior model

    International Nuclear Information System (INIS)

    Lehr, W.; Wesley, D.; Simecek-Beatty, D.; Jones, R.; Kachook, G.; Lankford, J.

    2000-01-01

    The oil spill weathering program called ADIOS (Automated Data Inquiry for Oil Spills) which is widely used by the National Ocean and Atmospheric Administration (NOAA) has been completely upgraded to include modified algorithms for evaporation, spreading, dispersion and emulsification. This paper was divided into three parts to outlined the changes in the existing algorithms implemented in the new version and to discuss the new algorithms for additional weathering processes and cleanup activities. The paper also described the new interface, which is the result of the NOAA/HAZMAT research in software usability and uncertainty. In the new model, evaporation uses a pseudo-component approach and dispersion includes the effects of sedimentation. Droplet size distribution and water content were considered as factors for new estimates for wave breaking and emulsification. Numerical techniques that allow non-uniformity in slick thickness have been used to determine spreading. The inhalation hazard resulting from benzene evaporation from oil spill surfaces can be calculated using new sub models which can also record the effects of cleanup. The submodels also provide options regarding the initial spill release. Users of the ADIOS 2 can enter ranges of selected input parameters that are likely to be uncertain during a spill. The ADIOS 2 program is also equipped with a library of more than a thousand oils and refined products. 34 refs., 1 fig

  19. Modification of boundary plasma behavior by Ion Bernstein Wave heating on the HT-7 tokamak

    International Nuclear Information System (INIS)

    Xu, G.S.; Wan, B.N.; Song, M.; Ling, B.L.; Li, C.F.; Li, J.

    2003-01-01

    The boundary plasma behavior during Ion Bernstein Wave heating was investigated using Langmuir probe arrays on the HT-7 tokamak. A distinct weak turbulence regime was reproducibly observed in the 30 MHz IBW heated plasmas with RF power larger than 120 kW, which resulted in a particle confinement improvement of a factor of 2. The strong suppression and decorrelation effect of fluctuations resulted in the turbulent particle flux dropping by more than an order of magnitude in the plasma boundary region. An additional inward radial electric field and associated poloidal ExB flows were produced, which could account for the additional poloidal velocity in the electron diamagnetic direction at some radial locations of the boundary plasma. The electrostatic fluctuations were nearly completely decorrelated in the high frequency region and only low frequency fluctuations remained. The poloidal correlation was considerably reduced in the high poloidal wave number region and only the fluctuations with long poloidal wavelength remained. Three-wave nonlinear phase coupling between the whole frequency domain and the very low frequency region increased significantly in both the plasma edge and the SOL. Quite low frequency fluctuations (about 5 kHz) were generated, which dominated the boundary turbulence during IBW heating. Detailed analyses suggested that, when an IBW with a frequency of 30 MHz was launched into a plasma with the toroidal magnetic field between 1.75 T and 2.0 T, the ion cyclotron resonant layer of 5/2.D was located in the plasma edge region. The poloidal ExB sheared flows generated by IBW near this layer due to a ponderomotive interaction were found to be the mechanism underlying these phenomena. (author)

  20. Cultural Variations in Mothers' Acceptance of and Intent to Use Behavioral Child Management Techniques

    Science.gov (United States)

    Mah, Janet W. T.; Johnston, Charlotte

    2012-01-01

    We examined cultural differences in mothers' acceptance of and intent to use behavioral parenting techniques for managing disruptive child behavior, and the possible roles of parenting styles and implicit theories in explaining these cultural differences. A community sample of 117 Euro-Canadian and Chinese-immigrant mothers of boys aged 4- to…

  1. Modification in the thermo mechanical behavior of biodegradable polyesters submitted to gamma radiation

    International Nuclear Information System (INIS)

    Mega, Veronica I; Fernandez, Victor; Eisenberg, Patricia; Hermida, Elida B

    2006-01-01

    The biopolymers poly(3- polyhydroxy butyrate) (PHB), poly(3-hydroxy butyrate-co-3-hydroxyvalerate) (PHBV) and their mixtures with other biodegradables like polycaprolactone (PCL) are materials that can be used in the production of food packaging and in bioabsorbable medical applications because of their good processability, suitable mechanical properties and complete degradation in different environments. Radiation γ is an appropriate method for the sterilization of food packaging. It offers good storage stability and high microbiological safety. This work proposes to study the effect of radiation γ on the mechanical and thermal properties of sheets of PHB, PHBV and of a PHB-based commercial biodegradable mixture. The samples standardized for traction tests were irradiated in air, at a constant dosage rate of 10 kGy/h. The range of absorbed doses was from 10 to 179 kGy. The possible structural changes were evaluated by attenuated total reflection infrared spectroscopy. The thermal properties were determined by differential scanning calorimetry (DSC) and the mechanical properties were measured with a universal test machine. The ruling mechanism during the gamma irradiation of Biocycle 1000 (PHB), 1400-2 (PHB-PCL) and PHBV is chain scission. The decreased vitreous transition melting and crytallization temperatures of PHB and PHBV after increasing the dosage, are evidence of the reduction in average molecular weight due to this mechanism. A similar effect was observed in the mechanical properties of irradiated PHBV, Biocycle 1000 and 1400-2: decreased resistance to traction and in the percentage of elongation to fracture, while the tensile module remains almost constant. The tenacity of the Biocycle 1000 is reduced more than that for the PHBV, which is less crystalline; showing that the damage occurs mostly in the crystalline region. This behavior is repeated in the Biocycle 1400-2. For the doses used in food irradiation or in sterilization of food packaging (≤ 20

  2. Application of dotmocracy technique in assessment and management of unsafe behaviors

    Directory of Open Access Journals (Sweden)

    2013-02-01

    Full Text Available Introduction: Industrial accident is one of the most minatory elements for worker’s health, productivity and organizational performance. Unsafe behavior is the main reason associated with occurrence of accidents. The main goal of this study was application of participatory techniques to achieve control measures of these behaviors. .Material and Method: Using safety behavior sampling technique in this study, behaviors of staffs were evaluated and then the most risky behaviors were determined by paired comparison method. By application of participatory approach of dotmocracy in six steps, controlling ideas were derived by participation of operators, supervisors, engineers, HSE team and managers. .Result: 48.8% of the behaviors were unsafe. Misuse or notusing of the personal protective equipments with 63.4% was the most frequent unsafe behavior. Awkward postures, aggregation or passing under suspended loads were also followed by the unsafe behaviors. By application of participatory approach of dotmocracy, several applicable ideas in personal protective equipment, education, reinforcementand punishment, aggregation or passing under suspended loads and other ideas were achieved. . Conclusion: Dotmocracy participatory technique is an effective way to achieve various practical solutions in control of worker’s unsafe behaviors.

  3. Weight loss with naltrexone SR/bupropion SR combination therapy as an adjunct to behavior modification: the COR-BMOD trial

    Science.gov (United States)

    This 56-week, randomized, placebo-controlled trial examined the efficacy and safety of naltrexone plus bupropion as an adjunct to intensive behavior modification (BMOD). A total of 793 participants (BMI = 36.5 +/- 4.2 kg/m(2)) was randomly assigned in a 1:3 ratio to: (i) placebo + BMOD (N = 202); or...

  4. The Single and Combined Effects of Multiple Intensities of Behavior Modification and Methylphenidate for Children with Attention Deficit Hyperactivity Disorder in a Classroom Setting

    Science.gov (United States)

    Fabiano, Gregory A.; Pelham, William E., Jr.; Gnagy, Elizabeth M.; Burrows-MacLean, Lisa; Coles, Erika K.; Chacko, Anil; Wymbs, Brian T.; Walker, Kathryn S.; Arnold, Fran; Garefino, Allison; Keenan, Jenna K.; Onyango, Adia N.; Hoffman, Martin T.; Massetti, Greta M.; Robb, Jessica A.

    2007-01-01

    Currently behavior modification, stimulant medication, and combined treatments are supported as evidence-based interventions for attention deficit hyperactivity disorder in classroom settings. However, there has been little study of the relative effects of these two modalities and their combination in classrooms. Using a within-subject design, the…

  5. Investigating the Variables in a Mock Exam Study Session Designed to Improve Student Exam Performance in an Undergraduate Behavior Modification and Therapy Course

    Science.gov (United States)

    Dotson, Wesley H.

    2010-01-01

    The purpose of the present study was to identify components of an optional mock exam review session (e.g. requiring students to write answers, providing students grading keys for questions) responsible for improvements in student performance on application-based short-essay exams in an undergraduate behavior modification course. Both…

  6. Combinations of techniques that effectively change health behavior : evidence from meta-Cart analysis

    NARCIS (Netherlands)

    Dusseldorp, E.; Buuren, S. van; Genugten, L. van; Verheijden, M.W.; Empelen, P. van

    2014-01-01

    Objective: Many health-promoting interventions combine multiple behavior change techniques (BCTs) to maximize effectiveness. Although, in theory, BCTs can amplify each other, the available meta-analyses have not been able to identify specific combinations of techniques that provide synergistic

  7. A systematic study of mechanical properties, corrosion behavior and biocompatibility of AZ31B Mg alloy after ultrasonic nanocrystal surface modification.

    Science.gov (United States)

    Hou, Xiaoning; Qin, Haifeng; Gao, Hongyu; Mankoci, Steven; Zhang, Ruixia; Zhou, Xianfeng; Ren, Zhencheng; Doll, Gary L; Martini, Ashlie; Sahai, Nita; Dong, Yalin; Ye, Chang

    2017-09-01

    Magnesium alloys have tremendous potential for biomedical applications due to their good biocompatibility, osteoconductivity, and degradability, but can be limited by their poor mechanical properties and fast corrosion in the physiological environment. In this study, ultrasonic nanocrystal surface modification (UNSM), a recently developed surface processing technique that utilizes ultrasonic impacts to induce plastic strain on metal surfaces, was applied to an AZ31B magnesium (Mg) alloy. The mechanical properties, corrosion resistance, and biocompatibility of the alloy after UNSM treatment were studied systematically. Significant improvement in hardness, yield stress and wear resistance was achieved after the UNSM treatment. In addition, the corrosion behavior of UNSM-treated AZ31B was not compromised compared with the untreated samples, as demonstrated by the weight loss and released element concentrations of Mg and Al after immersion in alpha-minimum essential medium (α-MEM) for 24h. The in vitro biocompatibility of the AZ31B Mg alloys toward adipose-derived stem cells (ADSCs) before and after UNSM processing was also evaluated using a cell culture study. Comparable cell attachments were achieved between the two groups. These studies showed that UNSM could significantly improve the mechanical properties of Mg alloys without compromising their corrosion rate and biocompatibility in vitro. These findings suggest that UNSM is a promising method to treat biodegradable Mg alloys for orthopaedic applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. What Cognitive Behavioral Techniques Do Therapists Report Using when Delivering Cognitive Behavioral Therapy for the Eating Disorders?

    Science.gov (United States)

    Waller, Glenn; Stringer, Hannah; Meyer, Caroline

    2012-01-01

    Objective: Clinicians commonly "drift" away from using proven therapeutic techniques. This study examined the degree to which such drift occurs among cognitive behavioral therapy (CBT) clinicians working with a specific clinical population--adults with eating disorders. Method: The study used a correlational design. The participants were…

  9. Use of conventional-and radioisotope techniques to study the dynamic behavior of a particulate solid

    International Nuclear Information System (INIS)

    Santos Ferreira, L. dos.

    1976-01-01

    The behavior of solids in particlephase is studied with the purpose of determining the drop pressure through orificius of a Hopper, with conventional techniques as well as a new technique with radioisotopes to measure the porosity near the orifice of the Hopper. The rate of discharge was also studied. The use of radioisotopes presented similar results as those obtained elsewhere by conventional techniques. (Author) [pt

  10. Pharmacological evaluation of sedative and hypnotic effects of schizandrin through the modification of pentobarbital-induced sleep behaviors in mice.

    Science.gov (United States)

    Zhang, Chenning; Zhao, Xu; Mao, Xin; Liu, Aijing; Liu, Zhi; Li, Xiaolong; Bi, Kaishun; Jia, Ying

    2014-12-05

    The fruits of Schisandra chinensis have been recorded as an effective somnificant for the treatment of insomnia in some oriental countries pharmacopoeias. However, the mechanism of sedative and hypnotic effects of this kind of herb is still unclear. In the present study, schizandrin, which is the main component of Schisandra chinensis, was selected as a target compound to investigate possible mechanisms through behavioral pharmacology methods. The results showed that schizandrin possessed dose-dependent (5-45 mg/kg, i.p.) sedative effects on locomotion activity in normal mice, and produced a dose-dependent decrease in sleep latency and an increase in sleep duration in pentobarbital-treated mice; thus, itself did not induce sleep at higher dose which was used in this experiment (45 mg/kg, i.p.). It also can reverse the rodent models of insomnia induced by p-chlorophenylalanine (PCPA) and caffeine, which could exhibit a syne with 5-hydroxytryptophan (5-HTP) as well; therefore, the hypnotic effects of schizandrin were not inhibited by flumazenil (a specific gamma aminobutyric acid (GABA)-A-BZD receptor antagonist). Altogether, these results indicated that schizandrin produces beneficial sedative and hypnotic bioactivity, which might be mediated by the modification of the serotonergic system. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Behavior change techniques implemented in electronic lifestyle activity monitors: a systematic content analysis.

    Science.gov (United States)

    Lyons, Elizabeth J; Lewis, Zakkoyya H; Mayrsohn, Brian G; Rowland, Jennifer L

    2014-08-15

    Electronic activity monitors (such as those manufactured by Fitbit, Jawbone, and Nike) improve on standard pedometers by providing automated feedback and interactive behavior change tools via mobile device or personal computer. These monitors are commercially popular and show promise for use in public health interventions. However, little is known about the content of their feedback applications and how individual monitors may differ from one another. The purpose of this study was to describe the behavior change techniques implemented in commercially available electronic activity monitors. Electronic activity monitors (N=13) were systematically identified and tested by 3 trained coders for at least 1 week each. All monitors measured lifestyle physical activity and provided feedback via an app (computer or mobile). Coding was based on a hierarchical list of 93 behavior change techniques. Further coding of potentially effective techniques and adherence to theory-based recommendations were based on findings from meta-analyses and meta-regressions in the research literature. All monitors provided tools for self-monitoring, feedback, and environmental change by definition. The next most prevalent techniques (13 out of 13 monitors) were goal-setting and emphasizing discrepancy between current and goal behavior. Review of behavioral goals, social support, social comparison, prompts/cues, rewards, and a focus on past success were found in more than half of the systems. The monitors included a range of 5-10 of 14 total techniques identified from the research literature as potentially effective. Most of the monitors included goal-setting, self-monitoring, and feedback content that closely matched recommendations from social cognitive theory. Electronic activity monitors contain a wide range of behavior change techniques typically used in clinical behavioral interventions. Thus, the monitors may represent a medium by which these interventions could be translated for

  12. Informing Parents about the Pharmacological and Invasive Behavior Management Techniques Used in Pediatric Dentistry

    Directory of Open Access Journals (Sweden)

    Mehrysa Paryab

    2014-06-01

    Full Text Available Background and aims. Parental acceptance and consent are important parameters in selecting the required behavior management technique during pediatric dental treatment. The present study sought to assess the effect of three different informing methods on the parental acceptance, consent and concern regarding the pharmacological and invasive behavior management techniques used in pediatric dentistry. Materials and methods. Ninety mothers of 3-6-year-old uncooperative children were selected and randomly assigned to three study groups. The parents in each group were initially asked to answer three questions related to their levels of ‘acceptance’, ‘consent’, and ‘concern’ toward the five behavior management techniques. Then, the information about the techniques was presented through a piece of writing in group I, verbal presentation in group II and showing a film in group III. At last, the parents answered the same three questions again. Score changes were analyzed by using ANOVA, correlations, Mann-Whitney U and Kruskal-Wallis methods. Results. There were no statistically significant differences in score changes of parental acceptance, consent and concern between the three groups, overall and in relation to each behaviour management technique (P > 0.05. Mothers with academic education revealed more statistically significant concern following presentation of information by film (P < 0.05. Conclusion. None of the presentation methods had a significant preference over the others; in selecting the behavioral management techniques, it is advisable to observe individual factors, such as the level of education of the mothers.

  13. Evaluating the effectiveness of behavior change techniques in health-related behavior: a scoping review of methods used.

    Science.gov (United States)

    Michie, Susan; West, Robert; Sheals, Kate; Godinho, Cristina A

    2018-03-01

    Behavior change interventions typically contain multiple potentially active components: behavior change techniques (BCTs). Identifying which specific BCTs or BCT combinations have the potential to be effective for a given behavior in a given context presents a major challenge. The aim of this study was to review the methods that have been used to identify effective BCTs for given behaviors in given contexts and evaluate their strengths and limitations. A scoping review was conducted of studies that had sought to identify effective BCTs. Articles referring to "behavio(u)r change technique(s)" in the abstract/text were located, and ones that involved identification of effective BCTs were selected. The methods reported were coded. The methods were analyzed in general terms using "PASS" criteria: Practicability (facility to apply the method appropriately), Applicability (facility to generalize from findings to contexts and populations of interest), Sensitivity (facility to identify effective BCTs), and Specificity (facility to rule out ineffective BCTs). A sample of 10% of the studies reviewed was then evaluated using these criteria to assess how far the strengths and limitations identified in principle were borne out in practice. One hundred and thirty-five studies were identified. The methods used in those studies were experimental manipulation of BCTs, observational studies comparing outcomes in the presence or absence of BCTs, meta-analyses of BCT comparisons, meta-regressions evaluating effect sizes with and without specific BCTs, reviews of BCTs found in effective interventions, and meta-classification and regression trees. The limitations of each method meant that only weak conclusions could be drawn regarding the effectiveness of specific BCTs or BCT combinations. Methods for identifying effective BCTs linked to target behavior and context all have important inherent limitations. A strategy needs to be developed that can systematically combine the strengths of

  14. Validation of an elastic registration technique to estimate anatomical lung modification in Non-Small-Cell Lung Cancer Tomotherapy

    International Nuclear Information System (INIS)

    Faggiano, Elena; Cattaneo, Giovanni M; Ciavarro, Cristina; Dell'Oca, Italo; Persano, Diego; Calandrino, Riccardo; Rizzo, Giovanna

    2011-01-01

    The study of lung parenchyma anatomical modification is useful to estimate dose discrepancies during the radiation treatment of Non-Small-Cell Lung Cancer (NSCLC) patients. We propose and validate a method, based on free-form deformation and mutual information, to elastically register planning kVCT with daily MVCT images, to estimate lung parenchyma modification during Tomotherapy. We analyzed 15 registrations between the planning kVCT and 3 MVCT images for each of the 5 NSCLC patients. Image registration accuracy was evaluated by visual inspection and, quantitatively, by Correlation Coefficients (CC) and Target Registration Errors (TRE). Finally, a lung volume correspondence analysis was performed to specifically evaluate registration accuracy in lungs. Results showed that elastic registration was always satisfactory, both qualitatively and quantitatively: TRE after elastic registration (average value of 3.6 mm) remained comparable and often smaller than voxel resolution. Lung volume variations were well estimated by elastic registration (average volume and centroid errors of 1.78% and 0.87 mm, respectively). Our results demonstrate that this method is able to estimate lung deformations in thorax MVCT, with an accuracy within 3.6 mm comparable or smaller than the voxel dimension of the kVCT and MVCT images. It could be used to estimate lung parenchyma dose variations in thoracic Tomotherapy

  15. How to bridge the intention-behavior gap in food parenting: Automatic constructs and underlying techniques.

    Science.gov (United States)

    Larsen, Junilla K; Hermans, Roel C J; Sleddens, Ester F C; Vink, Jacqueline M; Kremers, Stef P J; Ruiter, Emilie L M; Fisher, Jennifer O

    2018-04-01

    Although parents often report positive intentions to promote and create a healthy food environment for their children (e.g., setting limits to snacks offered), they also experience difficulties in translating these intentions into actual behaviors. In this position paper, we argue that automatic processes explain an important part of the gap between parents' intentions and their actual food parenting behaviors. We provide a conceptual framework in which we hypothesize that automatic effects on food parenting occur through two key interrelated constructs: habits (key outcome construct) and volitional regulation behaviors (key mediating construct). Moreover, we discuss potentially important impulse-focused techniques that may directly change habits (e.g., nudging; inhibitory control training) or indirectly through volitional regulation behaviors (e.g., implementation intentions; mental contrasting). We make use of the literature on the role of intention-behavior discordance in general health behaviors and discuss implications for food parenting practices. Our framework provides a dual process view towards food parenting and may help to explain when and why parents are likely to engage in (un)healthy food parenting behaviors. In addition, this framework may hopefully stimulate research on (combinations of old and) new techniques to promote good food parenting behaviors. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Invited Review Article: Tip modification methods for tip-enhanced Raman spectroscopy (TERS) and colloidal probe technique: A 10 year update (2006-2016) review

    Science.gov (United States)

    Yuan, C. C.; Zhang, D.; Gan, Y.

    2017-03-01

    Engineering atomic force microscopy tips for reliable tip enhanced Raman spectroscopy (TERS) and colloidal probe technique are becoming routine practices in many labs. In this 10 year update review, various new tip modification methods developed over the past decade are briefly reviewed to help researchers select the appropriate method. The perspective is put in a large context to discuss the opportunities and challenges in this area, including novel combinations of seemingly different methods, potential applications of some methods which were not originally intended for TERS tip fabrication, and the problems of high cost and poor reproducibility of tip fabrication.

  17. Gender identification of Grasshopper Sparrows comparing behavioral, morphological, and molecular techniques

    Science.gov (United States)

    Ammer, F.K.; Wood, P.B.; McPherson, R.J.

    2008-01-01

    Correct gender identification in monomorphic species is often difficult especially if males and females do not display obvious behavioral and breeding differences. We compared gender specific morphology and behavior with recently developed DNA techniques for gender identification in the monomorphic Grasshopper Sparrow (Ammodramus savannarum). Gender was ascertained with DNA in 213 individuals using the 2550F/2718R primer set and 3% agarose gel electrophoresis. Field observations using behavior and breeding characteristics to identify gender matched DNA analyses with 100% accuracy for adult males and females. Gender was identified with DNA for all captured juveniles that did not display gender specific traits or behaviors in the field. The molecular techniques used offered a high level of accuracy and may be useful in studies of dispersal mechanisms and winter assemblage composition in monomorphic species.

  18. Behavior guidance techniques in Pediatric Dentistry: attitudes of parents of children with disabilities and without disabilities.

    Science.gov (United States)

    de Castro, Alessandra Maia; de Oliveira, Fabiana Sodré; de Paiva Novaes, Myrian Stella; Araújo Ferreira, Danielly Cunha

    2013-01-01

    This study compared the parental acceptance of pediatric behavior guidance techniques (BGT). Forty parents of children without disabilities (Group A) and another 40 parents of children with disabilities (Group B) were selected. Each BGT was explained by a single examiner and it was presented together with a photograph album. After that parents evaluated the acceptance in: totally unacceptable, somewhat acceptable, acceptable, and totally acceptable. Results indicated that in Group A, the BGT based on communicative guidance was accepted by most participants. In Group B, just one mother considered totally unacceptable the voice control method and other two, tell-show-do. For both groups, the general anesthesia was the less accepted BGT. There was statistically significant difference in acceptance for protective stabilization with a restrictive device in Group B. Children's parents with and without disabilities accepted behavioral guidance techniques, but basic techniques showed higher rates of acceptance than advanced techniques. ©2013 Special Care Dentistry Association and Wiley Periodicals, Inc.

  19. Identifying configurations of behavior change techniques in effective medication adherence interventions: a qualitative comparative analysis.

    Science.gov (United States)

    Kahwati, Leila; Viswanathan, Meera; Golin, Carol E; Kane, Heather; Lewis, Megan; Jacobs, Sara

    2016-05-04

    Interventions to improve medication adherence are diverse and complex. Consequently, synthesizing this evidence is challenging. We aimed to extend the results from an existing systematic review of interventions to improve medication adherence by using qualitative comparative analysis (QCA) to identify necessary or sufficient configurations of behavior change techniques among effective interventions. We used data from 60 studies in a completed systematic review to examine the combinations of nine behavior change techniques (increasing knowledge, increasing awareness, changing attitude, increasing self-efficacy, increasing intention formation, increasing action control, facilitation, increasing maintenance support, and motivational interviewing) among studies demonstrating improvements in adherence. Among the 60 studies, 34 demonstrated improved medication adherence. Among effective studies, increasing patient knowledge was a necessary but not sufficient technique. We identified seven configurations of behavior change techniques sufficient for improving adherence, which together accounted for 26 (76 %) of the effective studies. The intervention configuration that included increasing knowledge and self-efficacy was the most empirically relevant, accounting for 17 studies (50 %) and uniquely accounting for 15 (44 %). This analysis extends the completed review findings by identifying multiple combinations of behavior change techniques that improve adherence. Our findings offer direction for policy makers, practitioners, and future comparative effectiveness research on improving adherence.

  20. Parental Attitudes Toward Advanced Behavior Guidance Techniques Used in Pediatric Dentistry.

    Science.gov (United States)

    Patel, Monica; McTigue, Dennis J; Thikkurissy, Sarat; Fields, Henry W

    2016-01-01

    To re-examine parental attitudes toward advanced behavior management techniques in pediatric dentistry and determine whether cost, urgency, and amount of treatment influence parental preferences. Parents viewed previously validated videotaped clinical vignettes of four advanced behavior guidance techniques: (1) passive immobilization; (2) active immobilization; (3) general anesthesia; and (4) oral sedation. The study was conducted in a children's hospital dental clinic and a suburban private pediatric dentistry office. Parents rated overall acceptance of the techniques, and acceptance under specified conditions using an anchored visual analogue scale. One hundred five parents completed the survey; 55 from the children's hospital and 50 from private practice. Oral sedation was rated as the most acceptable technique, followed by general anesthesia, active immobilization, and passive immobilization. As urgency, convenience, and previous experience increased, parental acceptance of the technique increased. As cost of treatment increased, parental acceptance decreased. Ratings between the children's hospital group and private practice group differed, as did the demographic variables of insurance, income, and race. The hierarchy of parental acceptance of advanced behavior guidance techniques is changing with increasing approval of pharmacological management and decreasing approval of physical management. The health care delivery system, urgency, convenience, previous experience, and cost all influence parental acceptance.

  1. Maternal Relationship, Social Skills and Parental Behavior Through Neuroimaging Techniques and Behavioral Studies

    OpenAIRE

    Serra, Mauro

    2015-01-01

    Mother child relationship is the first and the most important social relationship as it has implications on psychological and neural development of the individual. Here we investigated mother child relationship focusing on different aspects and using a combination of behavioural and neuroimaging techniques. In the first study we addressed the association between brain connectivity and interpersonal competences which are at the basis of every social interaction including the ones involved in m...

  2. Measurement and image processing evaluation of surface modifications of dental implants G4 pure titanium created by different techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bulutsuz, A. G., E-mail: asligunaya@gmail.com [Department of Mechanical Engineering, Yildiz Technical University, 34349 Besiktas, İstanbul (Turkey); Demircioglu, P., E-mail: pinar.demircioglu@adu.edu.tr; Bogrekci, I., E-mail: ismail.bogrekci@adu.edu.tr [Adnan Menderes University, Faculty of Engineering, Department of Mechanical Engineering, Aytepe, 09010, Aydin (Turkey); Durakbasa, M. N., E-mail: durakbasa@gmx.at [Department of Interchangeable Manufacturing and Industrial Metrology, Institute for Production Engineering and Laser Technology, Vienna University of Technology, Karlsplatz 13/3113 A-1040 Wien (Austria); Katiboglu, A. B., E-mail: abkatiboglu@hotmail.com [Istanbul University, Faculty of Dentistry, Department of Oral and Maxillofacial Surgery, Istanbul (Turkey)

    2015-03-30

    Foreign substances and organic tissue interaction placed into the jaw in order to eliminate tooth loss involves a highly complex process. Many biological reactions take place as well as the biomechanical forces that influence this formation. Osseointegration denotes to the direct structural and functional association between the living bone and the load-bearing artificial implant's surface. Taking into consideration of the requirements in the manufacturing processes of the implants, surface characterizations with high precise measurement techniques are investigated and thus long-term success of dental implant is emphasized on the importance of these processes in this study. In this research, the detailed surface characterization was performed to identify the dependence of the manufacturing techniques on the surface properties by using the image processing methods and using the scanning electron microscope (SEM) for morphological properties in 3D and Taylor Hobson stylus profilometer for roughness properties in 2D. Three implant surfaces fabricated by different manufacturing techniques were inspected, and a machined surface was included into the study as a reference specimen. The results indicated that different surface treatments were strongly influenced surface morphology. Thus 2D and 3D precise inspection techniques were highlighted on the importance for surface characterization. Different image analyses techniques such as Dark-light technique were used to verify the surface measurement results. The computational phase was performed using image processing toolbox in Matlab with precise evaluation of the roughness for the implant surfaces. The relationship between the number of black and white pixels and surface roughness is presented. FFT image processing and analyses results explicitly imply that the technique is useful in the determination of surface roughness. The results showed that the number of black pixels in the image increases with increase in

  3. [The effects of a physical activity-behavior modification combined intervention(PABM-intervention) on metabolic risk factors in overweight and obese elementary school children].

    Science.gov (United States)

    Tak, Young-Ran; An, Ji-Yeon; Kim, Young-A; Woo, Hae-Young

    2007-10-01

    The purpose of this study was to identify the effects of a physical activity-behavior modification combined intervention(PABM-intervention) on metabolic risk factors in overweight and obese elementary school children. Thirty-two participants (BMI>or=85 percentile or relative obesity>or=10) were allocated to the PABM-intervention group and behavior modification only intervention group. The PABM-intervention was composed of exercise intervention consisting of 50 minutes of physical activity(Hip-hop dance & gym-based exercises) twice a week and the behavior modification intervention consisted of 50 minutes of instruction for modifying lifestyle habits(diet & exercise) once a week. Effectiveness of intervention was based on waist circumference, BP, HDL-cholesterol, TG, and fasting glucose before and after the intervention. The proportion of subjects with 1, 2, 3 or more metabolic risk factors were 28.1, 43.8, and 15.6%, respectively. After the 8-week intervention, waist circumference, systolic BP, diastolic BP, and HDL-cholesterol changed significantly(p<.01) in the PABM group. This provides evidence that a PABM-intervention is effective in changing metabolic risk factors such as waist circumference, systolic BP, diastolic BP, and HDL-cholesterol in overweight and obese elementary school children.

  4. Increasing Acceptance of Behavioral Child Management Techniques: What Do Parents Say?

    Science.gov (United States)

    Pemberton, Joy R.; Borrego, Joaquin

    2007-01-01

    Consumers' willingness to accept treatments is an important concern of clinicians and clinical researchers, particularly when treating children. However, few studies have directly asked parents to give reasons for accepting or refusing treatments. In the current study, 82 parents read descriptions of six behavioral child management techniques,…

  5. Effect of goal attainment theory based education program on cardiovascular risks, behavioral modification, and quality of life among patients with first episode of acute myocardial infarction: Randomized study.

    Science.gov (United States)

    Park, Moonkyoung; Song, Rhayun; Jeong, Jin-Ok

    2017-06-01

    Effect of goal-attainment-theory-based education program on cardiovascular risks, behavioral modification, and quality of life among patients with first episode of acute myocardial infarction: randomized study BACKGROUND: The behavioral modification strategies should be explored at the time of admission to lead the maximum effect of cardiovascular risk management. This randomized study aimed to elucidate the effects of a nurse-led theory-based education program in individuals with a first episode of acute myocardial infarction on cardiovascular risks, health behaviors, and quality of life over 6 months. The study involved a convenience sample of 64 patients with acute myocardial infarction who were randomly assigned to either the education group or the control group. The goal-attainment-based education program was designed to set the mutually agreed goals of risk management and the behavioral modification strategies for achieving those goals. Those in the control group received routine management only. The participants in both groups were contacted at 6-8 weeks and at 6 months after discharge to measure outcome variables. Repeated measure ANOVA was conducted using SPSSWIN (version 20.0) to determine the significance of differences in outcome variables over 6 months between the groups. Both groups showed significant positive changes in cardiovascular risks, health behaviors, and quality of life over 6 months. The 2-year risk of cardiovascular disease was significantly reduced in both study groups, but with no significant interaction effect (F=2.01, p=0.142). The performance and maintenance of health behaviors (F=3.75, p=0.029) and the mental component of quality of life (F=4.03, p=0.020) were significantly better in the education group than the control group. Applying a goal-oriented education program at an early stage of hospital management improved and maintained blood glucose, health behaviors, and mental component of the quality of life up to six months in

  6. Modification of an impulse-factoring orbital transfer technique to account for orbit determination and maneuver execution errors

    Science.gov (United States)

    Kibler, J. F.; Green, R. N.; Young, G. R.; Kelly, M. G.

    1974-01-01

    A method has previously been developed to satisfy terminal rendezvous and intermediate timing constraints for planetary missions involving orbital operations. The method uses impulse factoring in which a two-impulse transfer is divided into three or four impulses which add one or two intermediate orbits. The periods of the intermediate orbits and the number of revolutions in each orbit are varied to satisfy timing constraints. Techniques are developed to retarget the orbital transfer in the presence of orbit-determination and maneuver-execution errors. Sample results indicate that the nominal transfer can be retargeted with little change in either the magnitude (Delta V) or location of the individual impulses. Additonally, the total Delta V required for the retargeted transfer is little different from that required for the nominal transfer. A digital computer program developed to implement the techniques is described.

  7. Efficacy and safety of Elevate® system on apical and anterior compartment prolapse repair with personal technique modification

    Directory of Open Access Journals (Sweden)

    Daniele Castellani

    Full Text Available ABSTRACT Aim: To evaluate the effectiveness and safety of Anterior Elevate® mesh kit system (AES in woman with symptomatic stage 3 or 4 anterior and/or apical pelvic organ prolapse (POP. Materials and Methods: This retrospective, monocentric, single surgeon study enrolled between May 2010 and January 2013 fifty-six woman experiencing symptomatic anterior vaginal prolapse with or without apical descent (POP-Q stage 3 or 4. All women received a AES and 7 (12.5% received a concomitant transvaginal hysterectomy. Primary endpoint was anatomic correction of prolapse; success was defined as POP-Q stage ≤ 1 or asymptomatic stage 2. Secondary endpoints were quality-of-life (QOL results and patients' safety outcomes, which were assessed by 3 validated self-reporting questionnaires at baseline and annually: ICIQ-UI short form, ICIQ-VS and P-QOL. All patients completed 2-years and 28 women 3-years of follow-up. Surgical approach was modified in women with uterus, moving the two-propylene strips anteriorly around the cervix itself crossing one another, so the left will take place in the right side and the right on the opposite. This modification was made in order to better support the uterus. Results: Vaginal mesh exposure was present in 3 (5,3% patients. Very good anatomical outcomes were seen, with one (1,8% failure at 6-months, 4 (7,1% at 1-year, 6 at 2-years (10,7%. Statistically significant improvements were seen in the ICIQ-VS and P-QOL questionnaires throughout follow-up. Conclusion: Our data suggest that AES is a minimally-invasive transvaginal procedure to repair anterior and apical POP, with good evidence related to mid-term safety and efficacy.

  8. Hemodynamic stability ensured by a low dose, low volume, unilateral hypobaric spinal block: modification of a technique.

    Science.gov (United States)

    Elzinga, L; Marcus, M; Peek, D; Borg, P; Jansen, J; Koster, J; Enk, D

    2009-01-01

    We report the case of an 89-year-old female with a history of arterial hypertension, intermittent rapid atrial fibrillation and severe aortic valve stenosis, suffering from femoral neck fracture. Hyperbaric unilateral spinal anesthesia is a known technique to obtain stable hemodynamics combined with the possibility of continuous neurologic evaluation and preservation of cognitive functions. Because a hyperbaric unilateral technique can be very painful in case of traumatic hip fracture, a low dose, low volume, unilateral hypobaric spinal block may be an adequate alternative. In the present case report, a unilateral hypobaric spinal anesthesia was performed using 5 mg of bupivacaine in a 1.5 mL volume and a slow and steady, "air-buffered", directed injection technique, to allow an urgent hip arthroplasty. During surgery the patient was kept in the lateral recumbent position. Hemodynamics remained stable throughout the entire procedure without any need for vasoconstrictors. The impact of aortic valve stenosis combined with atrial fibrillation on anesthetic management and our considerations to opt for a unilateral hypobaric spinal anesthesia are discussed.

  9. The effects of minor alloy modifications and heat treatment on the microstructure and creep rupture behavior of 2.25Cr-1Mo Steel

    International Nuclear Information System (INIS)

    Todd, J.A.; Chung, D.W.; Parker, E.R.

    1983-01-01

    The effects of alloy additions on the microstructure of simulated cooled and tempered 2.25Cr-1Mo steels have been studied using transmission electron microscopy. Carbide precipitation sequences have been identified in the modification 3Cr-1Mo-1Mn-1Ni and compared to those in 2.25Cr-1Mo steels modified with Mn and Ni and also with Ti, V and B. The influence of minor compositional changes on the creep rupture behavior of 2.25Cr-1Mo steel has been studied at 500 C, 560 C, and 600 C. The most significant effect of alloy modifications on creep properties resulted from additions of Mn and Cr. Preliminary studies show that 1% Mn and 0.5Mn + 1Ni + 0.75Cr additions significantly reduce creep strength at all three temperatures for tests up to 2000 hours duration. The 3Cr-1Mo-1Mn-1Ni steel showed improvements in rupture ductility at all temperatures when compared with the base 2.25Cr-1Mo steel and the manganese-nickel modifications. Plots of the Larson-Miller parameter for both these modifications lay within the scatter band for commercial 2.25Cr-1Mo steels

  10. The modification of attentional bias to emotional information: A review of the techniques, mechanisms, and relevance to emotional disorders.

    Science.gov (United States)

    Browning, Michael; Holmes, Emily A; Harmer, Catherine J

    2010-03-01

    A negative bias in the deployment of attention to emotional stimuli is commonly found in both anxiety and depression. Recent work has highlighted that such biases are causally related to emotional vulnerability, suggesting that interventions that ameliorate them may be therapeutic. Here, we review the evidence that attentional bias can be modified using both pharmacological and psychological interventions. We highlight the behavioral and neuroimaging studies that suggest that these interventions impact upon attention via alteration of distinct neural mechanisms. Specifically, pharmacological interventions appear to influence the initial deployment of attention via an effect on the amygdala-based stimulus appraisal system, whereas psychological interventions influence attention at later time points and may alter activity in the lateral prefrontal cortex. Finally, we suggest a conceptual framework that embraces both pharmacological and psychological approaches and consider the possible implications of this work for future research and treatment development.

  11. Effects of luminance contrast and its modifications on fixation behavior during free viewing of images from different categories.

    Science.gov (United States)

    Açik, Alper; Onat, Selim; Schumann, Frank; Einhäuser, Wolfgang; König, Peter

    2009-06-01

    During viewing of natural scenes, do low-level features guide attention, and if so, does this depend on higher-level features? To answer these questions, we studied the image category dependence of low-level feature modification effects. Subjects fixated contrast-modified regions often in natural scene images, while smaller but significant effects were observed for urban scenes and faces. Surprisingly, modifications in fractal images did not influence fixations. Further analysis revealed an inverse relationship between modification effects and higher-level, phase-dependent image features. We suggest that high- and mid-level features--such as edges, symmetries, and recursive patterns--guide attention if present. However, if the scene lacks such diagnostic properties, low-level features prevail. We posit a hierarchical framework, which combines aspects of bottom-up and top-down theories and is compatible with our data.

  12. Modification in the assembly technique of histological sections for analysis of spatial distribution of boron by autoradiography

    International Nuclear Information System (INIS)

    Portu, A; Carpano, M; Dagrosa, A; Pozzi, E; Thorp, S; Curotto, P; Cabrini, R L; Saint Martin, G

    2012-01-01

    The Boron Neutron Capture Therapy (BNCT) is a modality for the treatment of cancer, based on the capture reaction 10 B(n,α) 7 Li. The emitted particles are highly transferred linear of energy and have a short range in tissue (10 μ). Therefore, if the boron is selectively accumulates in tumor cellulo, the damage will be limited to preserving normal cellulo. Thus, the knowledge of the location of 10 B in the different structures of biological tissues as tumor and surrounding tissue, is essential when considering BNCT treatment (Barth et al., 2005). Neutron autoradiography is one of the few methods that allow studying the distribution spatial of elements emitters in a material containing such. As part of BNCT, the first step in performing autoradiography involves placing a freeze tissue section on a nuclear track detector (SSNTD) (Wittig et al., 2008). For this purpose, tissue samples are fixed in N 2 (liq) when they are resected after infusion boronated compound. The sample-detector arrangement is irradiated with thermal neutrons and elements cast in the capture reaction zones produce latent damage SSNTD. Chemically attacking the detector, this latent trace level can be amplified by optical microscopy. Thus, the distribution of 10 B in biological samples can be evaluated, so that this technique is suitable for studying the uptake of boron compounds for the different histological structures. In our laboratory, we have developed neutron autoradiography and has been applied to the study of different biological models (Portu et al., 2011a). In particular, the study conducted by the micro-distribution 10 B in tumors from nude mice model of cutaneous melanomas injected with boronophenylalanine (BPA) (Carpano et al, 2010;. Portu et al, 2011b.). Still using means of support for the sample to be cut, as OCTTM, the lack of structure of necrotic areas of tumors such causes tearing of these regions in the cutting process, which prevents achieving adequate for analysis sections

  13. Modification of the morphology and optical properties of SnS films using glancing angle deposition technique

    Energy Technology Data Exchange (ETDEWEB)

    Sazideh, M.R., E-mail: Mohammadrezasazideh@gmail.com [Thin Film Lab., Faculty of Physics, Semnan University, Semnan, Islamic Republic of Iran (Iran, Islamic Republic of); Dizaji, H. Rezagholipour, E-mail: hrgholipour@semnan.ac.ir [Faculty of Physics, Semnan University, P.O. Box: 35195-363, Semnan, Islamic Republic of Iran (Iran, Islamic Republic of); Ehsani, M.H., E-mail: mhe_ehsani@yahoo.com [Faculty of Physics, Semnan University, P.O. Box: 35195-363, Semnan, Islamic Republic of Iran (Iran, Islamic Republic of); Moghadam, R. Zarei, E-mail: r.zarei1991@gmail.com [Thin Film Lab., Faculty of Physics, Semnan University, Semnan, Islamic Republic of Iran (Iran, Islamic Republic of)

    2017-05-31

    Highlights: • SnS thin films produced by thermal evaporation method using glancing angle deposition technique. • At α = 85° the layers show a considerable change in effective refractive index (Δn = 1.7) at near-IR spectral range. • FESEM images showed drastic changes in the structure and morphology of individual nano-plates as a function of incident angle deposition. - Abstract: Tin sulfide (SnS) films were prepared by thermal evaporation method using Glancing Angle Deposition (GLAD) technique at zero and different oblique incident flux angles (α = 45°, 55°, 65°, 75° and 85°). The physical properties of prepared films were systematically investigated. The X-ray diffraction analysis indicated that the film deposited at α = 0° formed as single phase with an orthorhombic structure. However, the layers became amorphous at α = 45°, 55°, 65°, 75° and 85°. Beside the appearance of amorphous feature in the film prepared at α higher than zero, Sn{sub 2}S{sub 3} phase was also observed. The top and cross-sectional field emission scanning electron microscope (FESEM) images of the samples showed noticeable changes in the structure and morphology of individual nano-plates as a function of incident angle. The band gap and refractive index values of the films were calculated by optical transmission measurements. The optical band-gap values were observed to increase with increasing the incident flux angle. This can be due to presence of Sn{sub 2}S{sub 3} phase observed in the samples produced at α values other than zero. The effective refractive index and porosity exhibit an opposite evolution as the incident angle α rises. At α = 85° the layers show a considerable change in effective refractive index (Δn = 1.7) at near-IR spectral range.

  14. UNDERSTANDING OF NON VERBAL BEHAVIOR CLIENTS AND TECHNIQUES IN COUNSELING SESSION

    Directory of Open Access Journals (Sweden)

    afdal afdal

    2016-06-01

    Full Text Available The practice of counseling by counselor not only need the skills to understand what is expressed by the client, but were further able to understand and have skills in giving meaning to the nonverbal communication, demonstrated by the behavior of a counseling session. During this time many of counselors who focus only on what is revealed by the client and using verbal techniques alone without seeing what goes on inside the client more deeply to understand the communication indicated by nonverbal behavior. The techniques used in the discussion of this article provides the inspiration that counseling is an art, not superficial, not skeptical and just focus on one technique alone, but many of the techniques that can be used to explore client issues. Furthermore, this paper supports the philosophical theory of Gestalt who believe that the client can feel the direct presence in the counseling sessions through the practices of the techniques used, to interpret the expression of various communications made, stationing themselves and find their own meaning.

  15. The effects of a novel hostile interpretation bias modification paradigm on hostile interpretations, mood, and aggressive behavior

    NARCIS (Netherlands)

    AlMoghrabi, Nouran; Huijding, Jorg; Franken, Ingmar H A

    2018-01-01

    Background and objectives Cognitive theories of aggression propose that biased information processing is causally related to aggression. To test these ideas, the current study investigated the effects of a novel cognitive bias modification paradigm (CBM-I) designed to target interpretations

  16. Behavior Modification in the Classroom. Final Report. Production and Evaluation of a Film about Behavior Techniques to Increase Task Oriented Behavior.

    Science.gov (United States)

    Stanford Univ., CA. Dept. of Communication.

    A 21 minute sound color film was produced in an attempt to help teachers and educational specialists see people like themselves helping youngsters become more task oriented by the use of operant conditioning and modeling procedures formulated by Skinner (1953) and Bandura (1964). The unstructured and unrehearsed film consists of edited film…

  17. Can cognitive processes help explain the success of instructional techniques recommended by behavior analysts?

    Science.gov (United States)

    Markovits, Rebecca A.; Weinstein, Yana

    2018-01-01

    The fields of cognitive psychology and behavior analysis have undertaken separate investigations into effective learning strategies. These studies have led to several recommendations from both fields regarding teaching techniques that have been shown to enhance student performance. While cognitive psychology and behavior analysis have studied student performance independently from their different perspectives, the recommendations they make are remarkably similar. The lack of discussion between the two fields, despite these similarities, is surprising. The current paper seeks to remedy this oversight in two ways: first, by reviewing two techniques recommended by behavior analysts—guided notes and response cards—and comparing them to their counterparts in cognitive psychology that are potentially responsible for their effectiveness; and second, by outlining some other areas of overlap that could benefit from collaboration. By starting the discussion with the comparison of two specific recommendations for teaching techniques, we hope to galvanize a more extensive collaboration that will not only further the progression of both fields, but also extend the practical applications of the ensuing research.

  18. Influence of nitriding atmosphere on the modification of surface titanium with focus on the behavior of blood platelets adhesion; Influencia da atmosfera nitretante na modificacao de superficies de titanio com enfase no comportamento de adesao de plaquetas sanguineas

    Energy Technology Data Exchange (ETDEWEB)

    Vitoriano, J.O.; Alves, C. [Universidade Federal Rural do Semi-Arido (UFERSA), RN (Brazil); Braz, D.C.; Camara, R.B.G.; Rocha, H.A.O., E-mail: clodomiro.jr@hotmail.com [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil)

    2014-07-01

    The present study aimed to analyze the influence of surface modification of titanium on the adhesion of blood platelets, through techniques of adhesion and morphological analyzes. Discs of titanium grade II received different surface treatments with plasma of Ar + N{sub 2} + H{sub 2} and Ar + H{sub 2}, forming two experimental groups including only polished samples used as standard. Before and after treatment the samples were characterized according to topography, crystalline structure and wettability, using atomic force microscopy, X-ray diffraction, Raman spectroscopy and testing of sessile drop, respectively. Platelet rich plasma (PRP) was applied on the modified surfaces in a culture plates. Images obtained by electron microscopy of adhered platelets were analyzed to verify the behavior of platelets in the different experimental conditions. (author)

  19. Sustaining a "culture of silence" in the neonatal intensive care unit during nonemergency situations: a grounded theory on ensuring adherence to behavioral modification to reduce noise levels.

    Science.gov (United States)

    Swathi, S; Ramesh, A; Nagapoornima, M; Fernandes, Lavina M; Jisina, C; Rao, P N Suman; Swarnarekha, A

    2014-01-01

    The aim of this study was to generate a substantive theory explaining how the staff in a resource-limited neonatal intensive care unit (NICU) of a developing nation manage to ensure adherence to behavioral modification components of a noise reduction protocol (NsRP) during nonemergency situations. The study was conducted after implementation of an NsRP in a level III NICU of south India. The normal routine of the NICU is highly dynamic because of various categories of staff conducting clinical rounds followed by care-giving activities. This is unpredictably interspersed with very noisy emergency management of neonates who suddenly fall sick. In-depth interviews were conducted with 36 staff members of the NICU (20 staff nurses, six nursing aides, and 10 physicians). Group discussions were conducted with 20 staff nurses and six nursing aides. Data analysis was done in line with the reformulated grounded theory approach, which was based on inductive examination of textual information. The results of the analysis showed that the main concern was to ensure adherence to behavioral modification components of the NsRP. This was addressed by using strategies to "sustain a culture of silence in NICU during nonemergency situations" (core category). The main strategies employed were building awareness momentum, causing awareness percolation, developing a sense of ownership, expansion of caring practices, evolution of adherence, and displaying performance indicators. The "culture of silence" reconditions the existing staff and conditions new staff members joining the NICU. During emergency situations, a "noisy culture" prevailed because of pragmatic neglect of behavioral modification when life support overrode all other concerns. In addition to this, the process of operant conditioning should be formally conducted once every 18 months. The results of this study may be adapted to create similar strategies and establish context specific NsRPs in NICUs with resource constraints.

  20. Dynamic Deformation Behavior of Soft Material Using Shpb Technique and Pulse Shaper

    Science.gov (United States)

    Lee, Ouk Sub; Cho, Kyu Sang; Kim, Sung Hyun; Han, Yong Hwan

    This paper presents a modified Split Hopkinson Pressure Bar (SHPB) technique to obtain compressive stress strain data for NBR rubber materials. An experimental technique with a modified the conventional SHPB has been developed for measuring the compressive stress strain responses of materials with low mechanical impedance and low compressive strengths, such as the rubber and the polymeric material. This paper uses an aluminum pressure bar to achieve a closer impedance match between the pressure bar and the specimen materials. In addition, a pulse shaper is utilized to lengthen the rising time of the incident pulse to ensure dynamic stress equilibrium and homogeneous deformation of NBR rubber materials. It is found that the modified technique can determine the dynamic deformation behavior of rubbers more accurately.

  1. An automatic CT-guided adaptive radiation therapy technique by online modification of multileaf collimator leaf positions for prostate cancer

    International Nuclear Information System (INIS)

    Court, Laurence E.; Dong Lei; Lee, Andrew K.; Cheung, Rex; Bonnen, Mark D.; O'Daniel, Jennifer; Wang He; Mohan, Radhe; Kuban, Deborah

    2005-01-01

    Purpose: To propose and evaluate online adaptive radiation therapy (ART) using in-room computed tomography (CT) imaging that detects changes in the target position and shape of the prostate and seminal vesicles (SVs) and then automatically modifies the multileaf collimator (MLC) leaf pairs in a slice-by-slice fashion. Methods and materials: For intensity-modulated radiation therapy (IMRT) using a coplanar beam arrangement, each MLC leaf pair projects onto a specific anatomic slice. The proposed strategy assumes that shape deformation is a function of only the superior-inferior (SI) position. That is, there is no shape change within a CT slice, but each slice can be displaced in the anteroposterior (AP) or right-left (RL) direction relative to adjacent slices. First, global shifts (in SI, AP, and RL directions) were calculated by three-dimensional (3D) registration of the bulk of the prostate in the treatment planning CT images with the daily CT images taken immediately before treatment. Local shifts in the AP direction were then found using slice-by-slice registration, in which the CT slices were individually registered. The translational shift within a slice could then be projected to a translational shift in the position of the corresponding MLC leaf pair for each treatment segment for each gantry angle. Global shifts in the SI direction were accounted for by moving the open portal superiorly or inferiorly by an integral number of leaf pairs. The proposed slice-by-slice registration technique was tested by using daily CT images from 46 CT image sets (23 each from 2 patients) taken before the standard delivery of IMRT for prostate cancer. A dosimetric evaluation was carried out by using an 8-field IMRT plan. Results: The shifts and shape change of the prostate and SVs could be separated into 3D global shifts in the RL, AP, and SI directions, plus local shifts in the AP direction, which were different for each CT slice. The MLC leaf positions were successfully

  2. A single intraperitoneal injection of endotoxin in rats induces long-lasting modifications in behavior and brain protein levels of TNF-α and IL-18

    Directory of Open Access Journals (Sweden)

    Bossù Paola

    2012-05-01

    Full Text Available Abstract Background Systemic inflammation might cause neuronal damage and sustain neurodegenerative diseases and behavior impairment, with the participation of pro-inflammatory cytokines, like tumor necrosis factor (TNF-α and interleukin (IL-18. However, the potential contribution of these cytokines to behavioral impairment in the long-term period has not been fully investigated. Methods Wistar rats were treated with a single intraperitoneal injection of LPS (5 mg/kg or vehicle. After 7 days and 10 months, the animal behavior was evaluated by testing specific cognitive functions, as mnesic, discriminative, and attentional functions, as well as anxiety levels. Contextually, TNF-α and IL-18 protein levels were measured by ELISA in defined brain regions (that is, frontal cortex, hippocampus, striatum, cerebellum, and hypothalamus. Results Behavioral testing demonstrated a specific and persistent cognitive impairment characterized by marked deficits in reacting to environment modifications, possibly linked to reduced motivational or attentional deficits. Concomitantly, LPS induced a TNF-α increase in the hippocampus and frontal cortex (from 7 days onward and cerebellum (only at 10 months. Interestingly, LPS treatment enhanced IL-18 expression in these same areas only at 10 months after injection. Conclusions Overall, these results indicate that the chronic neuroinflammatory network elicited by systemic inflammation involves a persistent participation of TNF-α accompanied by a differently regulated contribution of IL-18. This leads to speculation that, though with still unclear mechanisms, both cytokines might take part in long-lasting modifications of brain functions, including behavioral alteration.

  3. Implementation of behavior change techniques in mobile applications for physical activity.

    Science.gov (United States)

    Yang, Chih-Hsiang; Maher, Jaclyn P; Conroy, David E

    2015-04-01

    Mobile applications (apps) for physical activity are popular and hold promise for promoting behavior change and reducing non-communicable disease risk. App marketing materials describe a limited number of behavior change techniques (BCTs), but apps may include unmarketed BCTs, which are important as well. To characterize the extent to which BCTs have been implemented in apps from a systematic user inspection of apps. Top-ranked physical activity apps (N=100) were identified in November 2013 and analyzed in 2014. BCTs were coded using a contemporary taxonomy following a user inspection of apps. Users identified an average of 6.6 BCTs per app and most BCTs in the taxonomy were not represented in any apps. The most common BCTs involved providing social support, information about others' approval, instructions on how to perform a behavior, demonstrations of the behavior, and feedback on the behavior. A latent class analysis of BCT configurations revealed that apps focused on providing support and feedback as well as support and education. Contemporary physical activity apps have implemented a limited number of BCTs and have favored BCTs with a modest evidence base over others with more established evidence of efficacy (e.g., social media integration for providing social support versus active self-monitoring by users). Social support is a ubiquitous feature of contemporary physical activity apps and differences between apps lie primarily in whether the limited BCTs provide education or feedback about physical activity. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  4. Analysis of behavioral change techniques in community-led total sanitation programs.

    Science.gov (United States)

    Sigler, Rachel; Mahmoudi, Lyana; Graham, Jay Paul

    2015-03-01

    The lack of sanitation facilitates the spread of diarrheal diseases-a leading cause of child deaths worldwide. As of 2012, an estimated 1 billion people still practiced open defecation (OD). To address this issue, one behavioral change approach used is community-led total sanitation (CLTS). It is now applied in an estimated 66 countries worldwide, and many countries have adopted this approach as their main strategy for scaling up rural sanitation coverage. While it appears that many of the activities used in CLTS-that target community-level changes in sanitation behaviors instead of household-level changes-have evolved out of existing behavior change frameworks and techniques, it is less clear how these activities are adapted by different organizations and applied in different country contexts. The aims of this study are to (i) show which behavior change frameworks and techniques are the most common in CLTS interventions; (ii) describe how activities are implemented in CLTS interventions by region and context; and (3) determine which activities program implementers considered the most valuable in achieving open defecation free (ODF) status and sustaining it. The results indicate that a wide range of activities are conducted across the different programs and often go beyond standard CLTS activities. CLTS practitioners ranked follow-up and monitoring activities as the most important activities for achieving an ODF community, yet only 1 of 10 organizations conducted monitoring and follow-up throughout their project. Empirical studies are needed to determine which specific behavioral change activities are most effective at ending OD and sustaining it. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  5. Suppression of Remodeling Behaviors with Arachidonic Acid Modification for Enhanced in vivo Antiatherogenic Efficacies of Lovastatin-loaded Discoidal Recombinant High Density Lipoprotein.

    Science.gov (United States)

    He, Hongliang; Zhang, Mengyuan; Liu, Lisha; Zhang, Shuangshuang; Liu, Jianping; Zhang, Wenli

    2015-10-01

    A series of in vitro evaluation in our previous studies had proved that arachidonic acid (AA) modification could suppress the remodeling behaviors of lovastatin-loaded discoidal reconstituted high density lipoprotein (LT-d-rHDL) by restraining the reactivity with lecithin cholesterol acyltransferase (LCAT) for reducing undesired drug leakage. This study focuses on the investigation of AA-modified LT-d-rHDL (AA-LT-d-rHDL) in atherosclerotic New Zealand White (NZW) rabbit models to explore whether AA modification could enhance drug targeting delivery and improve antiatherogenic efficacies in vivo. After pharmacokinetics of AA-LT-d-rHDL modified with different AA amount were investigated in atherosclerotic NZW rabbits, atherosclerotic lesions targeting property was assessed by ex vivo imaging of aortic tree and drug distribution. Furthermore, their antiatherogenic efficacies were elaborately evaluated and compared by typical biochemical indices. With AA modification amount augmenting, circulation time of AA-LT-d-rHDL was prolonged, and drug accumulation in the target locus was increased, eventually the significant appreciation in antiatherogenic efficacies were further supported by lower level of bad cholesterol, decreased atherosclerotic lesions areas and mean intima-media thickness (MIT), markedly attenuated matrix metalloproteinase-9 (MMP-9) protein expression and macrophage infiltration. This proof-of-concept study demonstrated that AA-LT-d-rHDL could enhance drug accumulation in atherosclerotic lesion and impede atherosclerosis progression more effectively.

  6. Effectiveness of teaching cognitive-behavioral techniques on locus of control in hemodialysis patients.

    Science.gov (United States)

    Mehrtak, Mohammad; Habibzadeh, Shahram; Farzaneh, Esmaeil; Rjaei-Khiavi, Abdollah

    2017-10-01

    Many of the cognitive behavioral models and therapeutic protocols developed so far for psychological disorders and chronic diseases have proved effective through clinical research. This study aimed to determine the effectiveness of teaching cognitive-behavioral techniques on locus of control in hemodialysis patients. This controlled clinical trial study was conducted in 2015 with 76 patients selected by census and treated with a hemodialysis machine in the dialysis department of Vali-Asr Hospital in the city of Meshkinshahr. A total of four patients were excluded because of their critical conditions while the rest, who were recruited, were randomly divided into two equal groups of 36 patients as the intervention and control groups. First, the locus of control was measured in both groups through a pretest, and cognitive-behavioral techniques were then taught to the intervention group during eight 45 to 90-minute sessions. The locus of control in patients of both groups was finally re-measured through a posttest. Data were collected using Rotter's Locus of Control Inventory. The Wilcoxon test and Mann-Whitney U test were respectively used in SPSS18 for data analysis. In the pretest and posttest stages respectively, 4.8% and 14.3% of samples in the control group as well as 14.3% and 33.3% of samples in the intervention group enjoyed internal locus of control. The difference between the pretest and posttest scores of internal locus of control in the intervention group was significant (p=0.004), which indicates the positive effect of cognitive-behavioral psychotherapeutic intervention on internalization of locus of control in this group. Given the external locus of control in most of the study patients and also the positive significant effect of cognitive-behavioral psychotherapy on internalization of locus of control in this group of patients, it appears necessary to have a psychology resident present in the hemodialysis department to teach the necessary cognitive-behavioral

  7. Effect of surface modification by nitrogen ion implantation on the electrochemical and cellular behaviors of super-elastic NiTi shape memory alloy.

    Science.gov (United States)

    Maleki-Ghaleh, H; Khalil-Allafi, J; Sadeghpour-Motlagh, M; Shakeri, M S; Masoudfar, S; Farrokhi, A; Beygi Khosrowshahi, Y; Nadernezhad, A; Siadati, M H; Javidi, M; Shakiba, M; Aghaie, E

    2014-12-01

    The aim of this investigation was to enhance the biological behavior of NiTi shape memory alloy while preserving its super-elastic behavior in order to facilitate its compatibility for application in human body. The surfaces of NiTi samples were bombarded by three different nitrogen doses. Small-angle X-ray diffraction was employed for evaluating the generated phases on the bombarded surfaces. The electrochemical behaviors of the bare and surface-modified NiTi samples were studied in simulated body fluid (SBF) using electrochemical impedance and potentio-dynamic polarization tests. Ni ion release during a 2-month period of service in the SBF environment was evaluated using atomic absorption spectrometry. The cellular behavior of nitrogen-modified samples was studied using fibroblast cells. Furthermore, the effect of surface modification on super-elasticity was investigated by tensile test. The results showed the improvement of both corrosion and biological behaviors of the modified NiTi samples. However, no significant change in the super-elasticity was observed. Samples modified at 1.4E18 ion cm(-2) showed the highest corrosion resistance and the lowest Ni ion release.

  8. Can't See the Wood for the Litter: Evaluation of Litter Behavior Modification in a Forest

    Science.gov (United States)

    Lindemann-Matthies, Petra; Bonigk, Isabel; Benkowitz, Dorothee

    2012-01-01

    This study investigated elementary school children's (n = 171) litter behavior during guided forest tours following two different treatments. Four classes received a verbal appeal not to litter in the forest, while another four classes received both a verbal appeal and a demonstration of the desired litter behavior (picking up litter, putting it…

  9. Diet Behavior Change Techniques in Type 2 Diabetes: A Systematic Review and Meta-analysis.

    Science.gov (United States)

    Cradock, Kevin A; ÓLaighin, Gearóid; Finucane, Francis M; McKay, Rhyann; Quinlan, Leo R; Martin Ginis, Kathleen A; Gainforth, Heather L

    2017-12-01

    Dietary behavior is closely connected to type 2 diabetes. The purpose of this meta-analysis was to identify behavior change techniques (BCTs) and specific components of dietary interventions for patients with type 2 diabetes associated with changes in HbA 1c and body weight. The Cochrane Library, CINAHL, Embase, PubMed, PsycINFO, and Scopus databases were searched. Reports of randomized controlled trials published during 1975-2017 that focused on changing dietary behavior were selected, and methodological rigor, use of BCTs, and fidelity and intervention features were evaluated. In total, 54 studies were included, with 42 different BCTs applied and an average of 7 BCTs used per study. Four BCTs-"problem solving," "feedback on behavior," "adding objects to the environment," and "social comparison"-and the intervention feature "use of theory" were associated with >0.3% (3.3 mmol/mol) reduction in HbA 1c . Meta-analysis revealed that studies that aimed to control or change the environment showed a greater reduction in HbA 1c of 0.5% (5.5 mmol/mol) (95% CI -0.65, -0.34), compared with 0.32% (3.5 mmol/mol) (95% CI -0.40, -0.23) for studies that aimed to change behavior. Limitations of our study were the heterogeneity of dietary interventions and poor quality of reporting of BCTs. This study provides evidence that changing the dietary environment may have more of an effect on HbA 1c in adults with type 2 diabetes than changing dietary behavior. Diet interventions achieved clinically significant reductions in HbA 1c , although initial reductions in body weight diminished over time. If appropriate BCTs and theory are applied, dietary interventions may result in better glucose control. © 2017 by the American Diabetes Association.

  10. The experimental modification of sonorous breathing.

    OpenAIRE

    Josephson, S C; Rosen, R C

    1980-01-01

    Loud snoring is a noxious habit and potential personal health risk. We are reporting the first experimental study of simple behavioral techniques for the modification of chronic snoring. Twenty-four volunteers participated in a repeated measures, randomized group design over 2 weeks of intervention and one-month follow-up. Treatment groups included a contingent-awakening and breathing retraining (self-control) condition. Both treatment groups were compared to a no-treatment control. Despite c...

  11. Investigation on creep behavior of geo-materials with suction control technique

    Directory of Open Access Journals (Sweden)

    Nishimura Tomoyoshi

    2016-01-01

    Full Text Available The compacted bentonite which has typical couple problem associated to thermal - hydration - mechanical – chemical (THMC consist of one component of engineered barrier. Recently, the couple THMC formulation modelling suggested by some researchers can be predicted basically phenomena for engineered barrier that approach to correct evaluate satisfied facilities. The compacted bentonite is essentially unsaturated condition, some behaviors for bentonite has similar or close with generally expansive unsaturated soils. Therefore, hydrations have given significant influence on deformation of compacted bentonite such as swelling. There are many researches for swelling behavior of compacted bentonite within soaking. Extended theoretical or experimental investigations for unsaturated soil mechanics are possible to describe the strength-deformation behavior of compacted bentonite with suction controlling principle. A new method of determining the failure phase such as great axis deformation and destructions like strip of surface in the laboratory is described and the creep behavior of compacted bentonite is considered under maintain of high relative humidity environment. The creep deformation measured using improved cyclic relative humidity control apparatus in terms of specific suction control technique.

  12. Developing close combat behaviors for simulated soldiers using genetic programming techniques.

    Energy Technology Data Exchange (ETDEWEB)

    Pryor, Richard J.; Schaller, Mark J.

    2003-10-01

    Genetic programming is a powerful methodology for automatically producing solutions to problems in a variety of domains. It has been used successfully to develop behaviors for RoboCup soccer players and simple combat agents. We will attempt to use genetic programming to solve a problem in the domain of strategic combat, keeping in mind the end goal of developing sophisticated behaviors for compound defense and infiltration. The simplified problem at hand is that of two armed agents in a small room, containing obstacles, fighting against each other for survival. The base case and three changes are considered: a memory of positions using stacks, context-dependent genetic programming, and strongly typed genetic programming. Our work demonstrates slight improvements from the first two techniques, and no significant improvement from the last.

  13. Analysis of functional damages in membrane receptor caused by radiation exposure and development of damage-preventing techniques by modification of membrane lipids

    International Nuclear Information System (INIS)

    Amano, Fumio; Tanaka, Yasuhito; Asano, Toshihiko; Ogura, Atsuro; Suzuki, Osamu; Matsuda, Junichiro

    1998-01-01

    This study was made to assess the physiological effects of radiation exposure using ligand-binding ability of the receptor on cell membrane. The effects of exposure to low-dose radiation were investigated in macrophage lines, J774.1 and RAW264.7 and human monocyte cell line, U937 using γ-radiation apparatus. In macrophages, the production of active oxygen (O 2 - ) was dose-dependently increased by γ-ray radiation, suggesting that the production might occur through the activation of proteinkinase C. Arachidonic acid bending BSA (AA-BSA) and eicosapentadienic acid binding BSA (EP-BSA) were used to modify the fatty acids in J774.1 cell and both BSA-treated cells exhibited significantly higher colony-forming abilities after γ-ray radiation. The modification of membrane lipids by AA-BSA or EPA-BSA resulted to reduce the inhibition of cell growth and change the cell adhesion ability and the fine structure of cell surface. Furthermore, the effects of radiation on behavior were investigated in PC mouse and the circadian rhythm of locomotive activity was found to be affected by radiation at 5-10 Gy. (M.N.)

  14. Techniques and Behaviors Associated with Exemplary Inpatient General Medicine Teaching: An Exploratory Qualitative Study.

    Science.gov (United States)

    Houchens, Nathan; Harrod, Molly; Moody, Stephanie; Fowler, Karen; Saint, Sanjay

    2017-07-01

    Clinician educators face numerous obstacles to their joint mission of facilitating high-quality learning while also delivering patient-centered care. Such challenges necessitate increased attention to the work of exemplary clinician educators, their respective teaching approaches, and the experiences of their learners. To describe techniques and behaviors utilized by clinician educators to facilitate excellent teaching during inpatient general medicine rounds. An exploratory qualitative study of inpatient teaching conducted from 2014 to 2015. Inpatient general medicine wards in 11 US hospitals, including university-affiliated hospitals and Veterans Affairs medical centers. Participants included 12 exemplary clinician educators, 57 of their current learners, and 26 of their former learners. In-depth, semi-structured interviews of exemplary clinician educators, focus group discussions with their current and former learners, and direct observations of clinical teaching during inpatient rounds. Interview data, focus group data, and observational field notes were coded and categorized into broad, overlapping themes. Each theme elucidated a series of actions, behaviors, and approaches that exemplary clinician educators consistently demonstrated during inpatient rounds: (1) they fostered positive relationships with all team members by building rapport, which in turn created a safe learning environment; (2) they facilitated patient-centered teaching points, modeled excellent clinical exam and communication techniques, and treated patients as partners in their care; and (3) they engaged in coaching and collaboration through facilitation of discussion, effective questioning strategies, and differentiation of learning among team members with varied experience levels. This study identified consistent techniques and behaviors of excellent teaching during inpatient general medicine rounds. © 2017 Society of Hospital Medicine

  15. Using Cognitive Behavior Therapy and Mindfulness Techniques in the Management of Chronic Pain in Primary Care.

    Science.gov (United States)

    Baker, Norah

    2016-06-01

    Chronic pain and its associated syndrome have become increasingly prevalent in primary care. With the increase in narcotic use and subsequent adverse events, primary care physicians often seek safer alternatives to treating this condition. Prescribing narcotics necessitates using methods to screen for high abuse risk and protect against misuse. With the understanding of how chronic pain is related to mental illnesses such as depression and posttraumatic stress disorder, mindfulness techniques and behavioral therapy can be used to help decrease the dependence on dangerous opioid medications and help patients understand, accept, and cope with their chronic pain. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Acoustic Modifications of the Ames 40x80 Foot Wind Tunnel and Test Techniques for High-Speed Research Model Testing

    Science.gov (United States)

    Soderman, Paul T.; Olson, Larry (Technical Monitor)

    1995-01-01

    The NFAC 40- by 80- Foot Wind Tunnel at Ames is being refurbished with a new, deep acoustic lining in the test section which will make the facility nearly anechoic over a large frequency range. The modification history, key elements, and schedule will be discussed. Design features and expected performance gains will be described. Background noise reductions will be summarized. Improvements in aeroacoustic research techniques have been developed and used recently at NFAC on several wind tunnel tests of High Speed Research models. Research on quiet inflow microphones and struts will be described. The Acoustic Survey Apparatus in the 40x80 will be illustrated. A special intensity probe was tested for source localization. Multi-channel, high speed digital data acquisition is now used for acoustics. And most important, phased microphone arrays have been developed and tested which have proven to be very powerful for source identification and increased signal-to-noise ratio. Use of these tools for the HEAT model will be illustrated. In addition, an acoustically absorbent symmetry plane was built to satisfy the HEAT semispan aerodynamic and acoustic requirements. Acoustic performance of that symmetry plane will be shown.

  17. Effects of Surface Modification of Nanodiamond Particles for Nucleation Enhancement during Its Film Growth by Microwave Plasma Jet Chemical Vapour Deposition Technique

    Directory of Open Access Journals (Sweden)

    Chii-Ruey Lin

    2014-01-01

    Full Text Available The seedings of the substrate with a suspension of nanodiamond particles (NDPs were widely used as nucleation seeds to enhance the growth of nanostructured diamond films. The formation of agglomerates in the suspension of NDPs, however, may have adverse impact on the initial growth period. Therefore, this paper was aimed at the surface modification of the NDPs to enhance the diamond nucleation for the growth of nanocrystalline diamond films which could be used in photovoltaic applications. Hydrogen plasma, thermal, and surfactant treatment techniques were employed to improve the dispersion characteristics of detonation nanodiamond particles in aqueous media. The seeding of silicon substrate was then carried out with an optimized spin-coating method. The results of both Fourier transform infrared spectroscopy and dynamic light scattering measurements demonstrated that plasma treated diamond nanoparticles possessed polar surface functional groups and attained high dispersion in methanol. The nanocrystalline diamond films deposited by microwave plasma jet chemical vapour deposition exhibited extremely fine grain and high smooth surfaces (~6.4 nm rms on the whole film. These results indeed open up a prospect of nanocrystalline diamond films in solar cell applications.

  18. The role of community health nurses in behavioral modification of parents of children with behavioral disorders in primary schools in Isfahan.

    Science.gov (United States)

    Dehaghani, Abdollah Rezaei; Ershadi, Kobra; Pahlavanzadeh, Saeid; Ahmadi, Sayed Ahmad

    2010-01-01

    Mental health is of great importance in childhood and the foundation of personality of every individual is laid during this period. Moreover, behavioral problems are common in children, and a lot of the individual, familial, and social disorders originate from the fact that these problems are not treated at the right time. More important is that the behavioral problems of children are rooted in the behavior and upbringing of parents. Therefore, we carried out the present study to investigate the role of community health nurses in modifying the behavior of parents whose children have behavioral problems. This research was a pre- and post-training quasi-experimental study. The study was carried out with the participation of the parents of 44 first-grade primary school children with reported behavioral problems. The instrument used in the study was a self-made questionnaire. The data was analyzed by SPSS software, using descriptive and inferential statistical methods (t-test and repeated ANOVA). The mean scores of parents' behavior before, immediately after, and one month after training exhibited a significant difference in both fathers and mothers (p = 0.04 in fathers and p parents led to a change in their behavior towards children, it is advisable to prepare and implement such programs.

  19. Toxic cocaine- and convulsant-induced modification of forced swimming behaviors and their interaction with ethanol: comparison with immobilization stress

    Science.gov (United States)

    Hayase, Tamaki; Yamamoto, Yoshiko; Yamamoto, Keiichi

    2002-01-01

    Background Swimming behaviors in the forced swimming test have been reported to be depressed by stressors. Since toxic convulsion-inducing drugs related to dopamine [cocaine (COC)], benzodiazepine [methyl 6,7-dimethoxy-4-ethyl-β-carboline-carboxylate (DMCM)], γ-aminobutyric acid (GABA) [bicuculline (BIC)], and glutamate [N-methyl-D-aspartate (NMDA)] receptors can function as stressors, the present study compared their effects on the forced swimming behaviors with the effects of immobilization stress (IM) in rats. Their interactions with ethanol (EtOH), the most frequently coabused drug with COC which also induces convulsions as withdrawal symptoms but interferes with the convulsions caused by other drugs, were also investigated. Results Similar to the IM (10 min) group, depressed swimming behaviors (attenuated time until immobility and activity counts) were observed in the BIC (5 mg/kg IP) and DMCM (10 mg/kg IP) groups at the 5 h time point, after which no toxic behavioral symptoms were observed. However, they were normalized to the control levels at the 12 h point, with or without EtOH (1.5 g/kg IP). In the COC (60 mg/kg IP) and NMDA (200 mg/kg IP) groups, the depression occurred late (12 h point), and was normalized by the EtOH cotreatment. At the 5 h point, the COC treatment enhanced the swimming behaviors above the control level. Conclusions Although the physiological stress (IM), BIC, and DMCM also depressed the swimming behaviors, a delayed occurrence and EtOH-induced recovery of depressed swimming were observed only in the COC and NMDA groups. This might be correlated with the previously-reported delayed responses of DA and NMDA neurons rather than direct effects of the drugs, which could be suppressed by EtOH. Furthermore, the characteristic psychostimulant effects of COC seemed to be correlated with an early enhancement of swimming behaviors. PMID:12425723

  20. Acylation Modification of Antheraea pernyi Silk Fibroin Using Succinic Anhydride and Its Effects on Enzymatic Degradation Behavior

    Directory of Open Access Journals (Sweden)

    Xiufang Li

    2013-01-01

    Full Text Available The degradation rate of tissue engineering scaffolds should match the regeneration rate of new tissues. Controlling the degradation behavior of silk fibroin is an important subject for silk-based tissue engineering scaffolds. In this study, Antheraea pernyi silk fibroin was successfully modified with succinic anhydride and then characterized by zeta potential, ninhydrin method, and FTIR. In vitro, three-dimensional scaffolds prepared with modified silk fibroin were incubated in collagenase IA solution for 18 days to evaluate the impact of acylation on the degradation behavior. The results demonstrated that the degradation rate of modified silk fibroin scaffolds was more rapid than unmodified ones. The content of the β-sheet structure in silk fibroin obviously decreased after acylation, resulting in a high degradation rate. Above all, the degradation behavior of silk fibroin scaffolds could be regulated by acylation to match the requirements of various tissues regeneration.

  1. Modification of the Feline-Ality™ Assessment and the Ability to Predict Adopted Cats’ Behaviors in Their New Homes

    Science.gov (United States)

    Weiss, Emily; Gramann, Shannon; Drain, Natasha; Dolan, Emily; Slater, Margaret

    2015-01-01

    Simple Summary While millions of cats enter animal shelters every year, only 11.5% of pet cats are obtained from a shelter in the United States. Previous research has indicated that unrealistic expectations set by adopters can increase the chances of an adopted cat returning to the shelter. The ASPCA®’s Meet Your Match® Feline-ality™ adoption program was designed to provide adopters with accurate information about an adult cat’s future behavior in the home. This research explored the ability of the modified Feline-ality™ assessment when done one day after the cat entered the shelter. Our modified version was predictive of feline behavior post adoption. Abstract It is estimated that 2.5 million cats enter animal shelters in the United States every year and as few as 20% leave the shelter alive. Of those adopted, the greatest risk to post-adoption human animal bond is unrealistic expectations set by the adopter. The ASPCA®’s Meet Your Match® Feline-ality™ adoption program was developed to provide adopters with an accurate assessment of an adult cat’s future behavior in the home. However, the original Feline-ality™ required a three-day hold time to collect cat behaviors on a data card, which was challenging for some shelters. This research involved creating a survey to determine in-home feline behavior post adoption and explored the predictive ability of the in-shelter assessment without the data card. Our results show that the original Feline-ality™ assessment and our modified version were predictive of feline behavior post adoption. Our modified version also decreased hold time for cats to one day. Shelters interested in increasing cat adoptions, decreasing length of stay and improving the adoption experience can now implement the modified version for future feline adoption success. PMID:26479138

  2. The Effectiveness of Cognitive- behavioral Techniques Training on Procrastination, Stress, Anxiety and Depression of High School Female Students

    Directory of Open Access Journals (Sweden)

    sA hasar

    2015-03-01

    Conclusions: training of cognitive-behavioral techniques reduced procrastination, anxiety and stress in experimental group in comparison with control group but it did not have meaningful effect on control group depression

  3. Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques

    International Nuclear Information System (INIS)

    Kiran, T.S.; Prasanna Kumar, M.; Basavarajappa, S.; Viswanatha, B.M.

    2014-01-01

    Highlights: • ZA-27 alloy is used as matrix material and reinforced with SiC and Gr particles. • Heat treatment was carried out for all specimen. • Dry sliding wear test was done on pin-on-disc apparatus by Taguchi technique. • ZA-27/9SiC–3Gr showed superior wear resistance over the base alloy. • Ceramic mixed mechanical layer on contact surface of composite was formed. - Abstract: Dry sliding wear behavior of zinc based alloy and composite reinforced with SiCp (9 wt%) and Gr (3 wt%) fabricated by stir casting method was investigated. Heat treatment (HT) and aging of the specimen were carried out, followed by water quenching. Wear behavior was evaluated using pin on disc apparatus. Taguchi technique was used to estimate the parameters affecting the wear significantly. The effect of HT was that it reduced the microcracks, residual stresses and improved the distribution of microconstituents. The influence of various parameters like applied load, sliding speed and sliding distance on wear behavior was investigated by means and analysis of variance (ANOVA). Further, correlation between the parameters was determined by multiple linear regression equation for each response. It was observed that the applied load significantly influenced the wear volume loss (WVL), followed by sliding speed implying that increase in either applied load or sliding speed increases the WVL. Whereas for composites, sliding distance showed a negative influence on wear indicating that increase in sliding distance reduces WVL due to the presence of reinforcements. The wear mechanism of the worn out specimen was analyzed using scanning electron microscopy. The analysis shows that the formation and retention of ceramic mixed mechanical layer (CMML) plays a major role in the dry sliding wear resistance

  4. The role of welding techniques in the biomechanical behavior of implant-supported prostheses.

    Science.gov (United States)

    Rodrigues, Sabrina Alessandra; Presotto, Anna Gabriella Camacho; Barão, Valentim Adelino Ricardo; Consani, Rafael Leonardo Xediek; Nóbilo, Mauro Antônio Arruda; Mesquita, Marcelo Ferraz

    2017-09-01

    This in vitro study investigated the role of welding techniques of implant-supported prostheses in the 2D and 3D marginal misfits of prosthetic frameworks, strain induced on the mini abutment, and detorque of prosthetic screws. The correlations between the analyzed variables were also investigated. Frameworks were cast in commercially pure titanium (cp-Ti). A marginal misfit of 200μm was simulated in the working models (control group) (n=20). The 2D marginal misfit was analyzed according to the single-screw test protocol using a precision optical microscope. The 3D marginal misfit was performed by X-ray microtomography. Strain gauge analysis was performed to investigate the strain induced on the mini abutment. A digital torque meter was used for analysis of the detorque and the mean value was calculated for each framework. Afterwards, the frameworks were divided into two experimental groups (n=10): Laser (L) and TIG (T). The welding techniques were performed according to the following parameters: L (390V/9ms); T (36A/60ms). The L and T groups were reevaluated according to the marginal misfit, strain, and detorque. The results were submitted to one-way ANOVA followed by Tukey's HSD test and Person correlation analysis (α=0.05). Welding techniques statistically reduced the 2D and 3D marginal misfits of prosthetic frameworks (p0.05). Positive correlations were observed between 2D and 3D marginal misfit reading methods (r=0.943, pwelding techniques improved the biomechanical behavior of the implant-supported system. TIG can be an acceptable and affordable technique to reduce the misfit of 3-unit Ti frameworks. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Suggestions for Modifications in the Teaching of General Chemistry to Accommodate Learning Disabled Students: Alternative Techniques for Teaching General Chemistry to Learning Disabled Students in the University.

    Science.gov (United States)

    Habib, H. S.

    A professor involved with the HELDS project (Higher Education for Learning Disabled Students) describes modifications in a general chemistry course. A syllabus lists program objectives for eight text chapters, evaluation components, and course rules. Two units are described in detail, with information presented on modifications made for LD…

  6. Behavior Change Techniques Present in Wearable Activity Trackers: A Critical Analysis.

    Science.gov (United States)

    Mercer, Kathryn; Li, Melissa; Giangregorio, Lora; Burns, Catherine; Grindrod, Kelly

    2016-04-27

    Wearable activity trackers are promising as interventions that offer guidance and support for increasing physical activity and health-focused tracking. Most adults do not meet their recommended daily activity guidelines, and wearable fitness trackers are increasingly cited as having great potential to improve the physical activity levels of adults. The objective of this study was to use the Coventry, Aberdeen, and London-Refined (CALO-RE) taxonomy to examine if the design of wearable activity trackers incorporates behavior change techniques (BCTs). A secondary objective was to critically analyze whether the BCTs present relate to known drivers of behavior change, such as self-efficacy, with the intention of extending applicability to older adults in addition to the overall population. Wearing each device for a period of 1 week, two independent raters used CALO-RE taxonomy to code the BCTs of the seven wearable activity trackers available in Canada as of March 2014. These included Fitbit Flex, Misfit Shine, Withings Pulse, Jawbone UP24, Spark Activity Tracker by SparkPeople, Nike+ FuelBand SE, and Polar Loop. We calculated interrater reliability using Cohen's kappa. The average number of BCTs identified was 16.3/40. Withings Pulse had the highest number of BCTs and Misfit Shine had the lowest. Most techniques centered around self-monitoring and self-regulation, all of which have been associated with improved physical activity in older adults. Techniques related to planning and providing instructions were scarce. Overall, wearable activity trackers contain several BCTs that have been shown to increase physical activity in older adults. Although more research and development must be done to fully understand the potential of wearables as health interventions, the current wearable trackers offer significant potential with regard to BCTs relevant to uptake by all populations, including older adults.

  7. A Case Report of Dissociative Neurosis (Depersonalization Disorder) in an Adolescent Treated with Family Therapy and Behavior Modification.

    Science.gov (United States)

    Dollinger, Stephen J.

    1983-01-01

    Describes the use of behavioral procedures as part of systems-oriented family therapy for the treatment of an adolescent girl's functional blackouts. Treatment successfully eliminated blackouts without directly addressing clear psychosexual issues. Discusses the case in terms of conceptualizing etiology and treatments and advocates working with…

  8. Modification of the Feline-Ality™ Assessment and the Ability to Predict Adopted Cats’ Behaviors in Their New Homes

    Directory of Open Access Journals (Sweden)

    Emily Weiss

    2015-02-01

    Full Text Available It is estimated that 2.5 million cats enter animal shelters in the United States every year and as few as 20% leave the shelter alive. Of those adopted, the greatest risk to post-adoption human animal bond is unrealistic expectations set by the adopter. The ASPCA®’s Meet Your Match® Feline-ality™ adoption program was developed to provide adopters with an accurate assessment of an adult cat’s future behavior in the home. However, the original Feline-ality™ required a three-day hold time to collect cat behaviors on a data card, which was challenging for some shelters. This research involved creating a survey to determine in-home feline behavior post adoption and explored the predictive ability of the in-shelter assessment without the data card. Our results show that the original Feline-ality™ assessment and our modified version were predictive of feline behavior post adoption. Our modified version also decreased hold time for cats to one day. Shelters interested in increasing cat adoptions, decreasing length of stay and improving the adoption experience can now implement the modified version for future feline adoption success.

  9. The influence of a behavior modification interventional program on body mass index in obese adolescents

    Directory of Open Access Journals (Sweden)

    Tahereh Toulabi

    2012-03-01

    Conclusion: The ‘‘behavior modification’’ interventional program is effective in reducing BMI in obese students, and therefore, school principals and planners can play an important role in controlling obesity by implementing this program via the students, their parents, and the school staff.

  10. Application of the Theoretical Domains Framework and the Behaviour Change Wheel to Understand Physicians' Behaviors and Behavior Change in Using Temporary Work Modifications for Return to Work: A Qualitative Study.

    Science.gov (United States)

    Horppu, Ritva; Martimo, K P; MacEachen, E; Lallukka, T; Viikari-Juntura, E

    2018-03-01

    Purpose Applying the theoretical domains framework (TDF) and the Behaviour Change Wheel (BCW) to understand physicians' behaviors and behavior change in using temporary work modifications (TWMs) for return to work (RTW). Methods Interviews and focus group discussions were conducted with 15 occupational physicians (OPs). Responses were coded using the TDF and the BCW. Results Key behaviors related to applying TWMs were initiating the process with the employee, making recommendations to the workplace, and following up the process. OP behaviors were influenced by several factors related to personal capability and motivation, and opportunities provided by the physical and social environment. Capability comprised relevant knowledge and skills related to applying TWMs, remembering to initiate TWMS and monitor the process, and being accustomed to reflective practice. Opportunity comprised physical resources (e.g., time, predefined procedures, and availability of modified work at companies), and social pressure from stakeholders. Motivation comprised conceptions of a proper OP role, confidence to carry out TWMs, personal RTW-related goals, beliefs about the outcomes of one's actions, feedback received from earlier cases, and feelings related to applying TWMs. OPs' perceived means to target these identified factors were linked to the following BCW intervention functions: education, training, persuasion, environmental restructuring, and enablement. The results suggest that at least these functions should be considered when designing future interventions. Conclusions Our study illustrates how theoretical frameworks TDF and BCW can be utilized in a RTW context to understand which determinants of physicians' behavior need to be targeted, and how, to promote desired behaviors.

  11. Investigations on Microstructure and Corrosion behavior of Superalloy 686 weldments by Electrochemical Corrosion Technique

    Science.gov (United States)

    Arulmurugan, B.; Manikandan, M.

    2018-02-01

    In the present study, microstructure and the corrosion behavior of Nickel based superalloy 686 and its weld joints has been investigated by synthetic sea water environment. The weldments were fabricated by Gas Tungsten Arc Welding (GTAW) and Pulsed Current Gas Tungsten Arc Welding (PCGTAW) techniques with autogenous mode and three different filler wires (ERNiCrMo-4, ERNiCrMo-10 and ERNiCrMo-14). Microstructure and Scanning electron microscope examination was carried out to evaluate the structural changes in the fusion zones of different weldments. Energy Dispersive X-ray Spectroscopy (EDS) analysis was carried out to evaluate the microsegregation of alloying elements in the different weld joints. Potentiodynamic polarization study was experimented on the base metal and weld joints in the synthetic sea water environment to evaluate the corrosion rate. Tafel’s interpolation technique was used to obtain the corrosion rate. The microstructure examination revealed that the fine equiaxed dendrites were observed in the pulsed current mode. EDS analysis shows the absence of microsegregation in the current pulsing technique. The corrosion rates of weldments are compared with the base metal. The results show that the fine microstructure with the absence of microsegregation in the PCGTA weldments shows improved corrosion resistance compared to the GTAW. Autogenous PCGTAW shows higher corrosion resistance irrespective of all weldments employed in the present study.

  12. Promising Behavior Change Techniques in a Multicomponent Intervention to Reduce Concerns about Falls in Old Age: A Delphi Study

    Science.gov (United States)

    Vestjens, Lotte; Kempen, Gertrudis I. J. M.; Crutzen, Rik; Kok, Gerjo; Zijlstra, G. A. Rixt

    2015-01-01

    Complex behavior change interventions need evidence regarding the effectiveness of individual components to understand how these interventions work. The objective of this study was to identify the least and most promising behavior change techniques (BCTs) within the Dutch intervention "A Matter of Balance" (AMB-NL) aimed at concerns…

  13. Fouling behavior of poly(ether)sulfone ultrafiltration membrane during concentration of whey proteins: Effect of hydrophilic modification using atmospheric pressure argon jet plasma.

    Science.gov (United States)

    Damar Huner, Irem; Gulec, Haci Ali

    2017-12-01

    The aim of the study was to investigate the effects of hydrophilic surface modification via atmospheric pressure jet plasma (ApJPls) on the fouling propensity of polyethersulfone (PES) ultrafiltration (UF) membranes during concentration of whey proteins. The distance from nozzle to substrate surface of 30mm and the exposure period of 5 times were determined as the most effective parameters enabling an increase in ΔG iwi value of the plain membrane from (-) 14.92±0.89mJ/m 2 to (+) 17.57±0.67mJ/m 2 . Maximum hydrophilicity and minimum surface roughness achieved by argon plasma action resulted in better antifouling behavior, while the hydraulic permeability and the initial permeate flux were decreased sharply due to the plasma-induced surface cross-linking. A quite steady state flux was obtained throughout the UF with the ApJPls modified PES membrane. The contribution of R frev to R t , which was 94% for the UF through the plain membrane, decreased to 43% after the plasma treatment. The overall results of this study highlighted the ApJPls modification decreased the fouling propensity of PES membrane without affecting the original protein rejection capability and improved the recovery of initial permeate flux after chemical cleaning. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Food Habits, Lifestyle Factors, and Risk of Prostate Cancer in Central Argentina: A Case Control Study Involving Self-Motivated Health Behavior Modifications after Diagnosis.

    Science.gov (United States)

    Pacheco, Sandaly O S; Pacheco, Fabio J; Zapata, Gimena M J; Garcia, Julieta M E; Previale, Carlos A; Cura, Héctor E; Craig, Winston J

    2016-07-09

    Cancer is the second most important non-communicable disease worldwide and disproportionately impacts low- to middle-income countries. Diet in combination with other lifestyle habits seems to modify the risk for some cancers but little is known about South Americans. Food habits of Argentinean men pre- and post-diagnosis of prostate cancer (n = 326) were assessed along with other lifestyle factors. We studied whether any of the behaviors and risk factors for prostate cancer were found in men with other cancers (n = 394), compared with control subjects (n = 629). Before diagnosis, both cases reported a greater mean consumption of meats and fats and lower intakes of fruits, green vegetables, cruciferous vegetables, legumes, nuts, seeds, and whole grains than the controls (all p modifications with increased consumption of fish, fruits (including red fruits in prostate cancer), cruciferous vegetables, legumes, nuts, and black tea (all p habits and other lifestyle factors after cancer diagnosis.

  15. Modification of the effects of 5-methoxy-N,N-dimethyltryptamine on exploratory behavior in rats by monoamine oxidase inhibitors

    Science.gov (United States)

    Halberstadt, Adam L.; Buell, Mahalah R.; Masten, Virginia L.; Risbrough, Victoria B.; Geyer, Mark A.

    2010-01-01

    RATIONALE The hallucinogenic tea known as ayahuasca is made from a combination of psychoactive plants that contribute the active components N,N-dimethyltryptamine (DMT) and 5-methoxy-DMT (5-MeO-DMT), as well as the monoamine oxidase (MAO) inhibitors (MAOIs) harmine and harmaline for oral activity. OBJECTIVE The present study examined the effects of 5-MeO-DMT in combination with MAOIs in rats using the Behavioral Pattern Monitor (BPM), which enables analyses of patterns of locomotor activity and exploration. Interaction studies using the serotonin (5-HT)1A antagonist WAY-100635 (1.0 mg/kg) and the 5-HT2A antagonist MDL 11,939 (1.0 mg/kg) were also performed to assess the respective contributions of these receptors to the behavioral effects of 5-MeO-DMT in MAOI-treated animals. RESULTS 5-MeO-DMT (0.01, 0.1, and 1.0 mg/kg) decreased locomotor activity and investigatory behavior. In rats pretreated with a behaviorally inactive dose of harmaline (0.1 mg/kg), 1.0 mg/kg 5-MeO-DMT had biphasic effects on locomotor activity, initially reducing locomotion and then increasing activity as time progressed. The ability of harmaline to shift 5-MeO-DMT to a biphasic locomotor pattern was shared by the selective MAOA inhibitor clorgyline, whereas the selective MAOB inhibitor (−)-deprenyl was ineffective. The late hyperactivity induced by the combination of 1.0 mg/kg 5-MeO-DMT and 0.3 mg/kg clorgyline was blocked by pretreatment with MDL 11,939. Pretreatment with WAY-100635 failed to attenuate either the early hypoactivity or the late hyperactivity. CONCLUSIONS The ability of harmaline to modify the behavioral effects of 5-MeO-DMT is mediated by inhibition of MAOA. Further, 5-HT2A receptors are responsible for the late hyperactivity induced by 5-MeO-DMT in the presence of MAOA inhibitors. PMID:18604652

  16. Effect of Bi modification treatment on microstructure, tensile properties, and fracture behavior of cast Al-Mg2Si metal matrix composite

    Directory of Open Access Journals (Sweden)

    Wu Xiaofeng

    2013-01-01

    Full Text Available Bi has a good modification effect on the hypoeutectic Al-Si alloy, and the morphology of eutectic Si changes from coarse acicular to fine fibrous. Based on the similarity between Mg2Si and Si phases in crystalline structure and crystallization process, the present study investigated the effects of different concentrations of Bi on the microstructure, tensile properties, and fracture behavior of cast Al-15wt.%Mg2Si in-situ metal matrix composite. The results show that the addition of the proper amount of Bi has a significant modification effect on both primary and eutectic Mg2Si in the Al-15wt.%Mg2Si composite. With an increase in Bi content from 0 to 1wt.%, the morphology of the primary Mg2Si is changed from irregular or dendritic to polyhedral shape; and its average particle size is significantly decreased from 70 to 6 μm. Moreover, the morphology of the eutectic Mg2Si phase is altered from flake-like to very short fibrous or dot-like. When the Bi addition exceeds 4.0wt.%, the primary Mg2Si becomes coarse again. However, the eutectic Mg2Si still exhibits the modified morphology. Tensile tests reveal that the Bi addition can improve the tensile strength and ductility of the material. Compared with those of the unmodified composite, the ultimate tensile strength and percentage elongation after fracture with 1.0wt.% Bi increase 51.2% and 100%, respectively. At the same time, the Bi addition changes the fracture behavior from brittle to ductile.

  17. How Compliance Measures, Behavior Modification, and Continuous Quality Improvement Led to Routine HIV Screening in an Emergency Department in Brooklyn, New York.

    Science.gov (United States)

    Isaac, Jermel Kyri; Sanchez, Travis H; Brown, Emily H; Thompson, Gina; Sanchez, Christina; Fils-Aime, Stephany; Maria, Jose

    2016-01-01

    New York State adopted a new HIV testing law in 2010 requiring medical providers to offer an HIV test to all eligible patients aged 13-64 years during emergency room or ambulatory care visits. Since then, Wyckoff Heights Medical Center (WHMC) in Brooklyn, New York, began implementing routine HIV screening organization-wide using a compliance, behavior-modification, and continuous quality-improvement process. WHMC first implemented HIV screening in the emergency department (ED) and evaluated progress with the following monthly indicators: HIV tests offered, HIV tests accepted, HIV tests ordered (starting in December 2013), HIV tests administered, positive HIV tests, and linkage to HIV care. Compliance with the delivery of HIV testing was determined by the proportion of patients who, after accepting a test, received one. During August 2013 through July 2014, of 57,852 eligible patients seen in the WHMC ED, a total of 31,423 (54.3%) were offered an HIV test. Of those, 8,229 (26.2%) patients accepted a test. Of those, 6,114 (74.3%) underwent a test. A total of 26 of the 6,114 patients tested (0.4%) had a positive test, and 24 of the 26 HIV-positive patients were linked to HIV medical care. By July 2014, the monthly proportion of patients offered a test was 62%; the proportion of those offered a test who had a test ordered was 98%, and the proportion of those with a test ordered who were tested was 81%. Testing compliance increased substantially at the WHMC ED, from 77% in December 2013 to >98% in July 2014. Using compliance-monitoring, behavior-modification, and continuous quality-improvement processes produced substantial increases in offers and HIV test completion. WHMC is replicating this approach across departments, and other hospitals implementing routine HIV screening programs should consider this approach as well.

  18. Antiepileptic Drug Behavioral Side Effects in Individuals with Mental Retardation and the Use of Behavioral Measurement Techniques.

    Science.gov (United States)

    Kalachnik, John E.; And Others

    1995-01-01

    Behavioral psychology measurement methods helped assess antiepileptic drug behavioral side effects in five individuals with mental retardation who could not verbally communicate presence of side effects. When the suspected antiepileptic drug was altered, an 81% reduction of maladaptive behaviors occurred. The measurement methods enabled systematic…

  19. Analyzing Activity Behavior and Movement in a Naturalistic Environment Using Smart Home Techniques.

    Science.gov (United States)

    Cook, Diane J; Schmitter-Edgecombe, Maureen; Dawadi, Prafulla

    2015-11-01

    One of the many services that intelligent systems can provide is the ability to analyze the impact of different medical conditions on daily behavior. In this study, we use smart home and wearable sensors to collect data, while ( n = 84) older adults perform complex activities of daily living. We analyze the data using machine learning techniques and reveal that differences between healthy older adults and adults with Parkinson disease not only exist in their activity patterns, but that these differences can be automatically recognized. Our machine learning classifiers reach an accuracy of 0.97 with an area under the ROC curve value of 0.97 in distinguishing these groups. Our permutation-based testing confirms that the sensor-based differences between these groups are statistically significant.

  20. Modification of the Feline-Ality™ Assessment and the Ability to Predict Adopted Cats’ Behaviors in Their New Homes

    OpenAIRE

    Weiss, Emily; Gramann, Shannon; Drain, Natasha; Dolan, Emily; Slater, Margaret

    2015-01-01

    Simple Summary While millions of cats enter animal shelters every year, only 11.5% of pet cats are obtained from a shelter in the United States. Previous research has indicated that unrealistic expectations set by adopters can increase the chances of an adopted cat returning to the shelter. The ASPCA®’s Meet Your Match® Feline-ality™ adoption program was designed to provide adopters with accurate information about an adult cat’s future behavior in the home. This research explored the ability ...

  1. Cure and mechanical behaviors of cycloaliphatic/DGEBA epoxy blend system using electron-beam technique

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.R.; Heo, G.Y.; Park, S.J. [Korea Research Institute of Chemical Technology, Taejeon (Korea)

    2002-05-01

    4-Vinyl-1- cyclohexene diepoxide (VCE)/ diglycidyl ether of bisphenol -A(DGEBA) epoxy blends with benzylquinoxalinium hexafluoroanti-monate were cured using an electron-beam technique. the effect of DGEBA content to VCE on cure behavior, thermal stabilities, and mechanical properties was investigated. The composition of VCE/DGEBA blend system varied within 100:0, 80:20, 60:40. 40:60 20:80, and 0:100wt%. The cure behavior and thermal stability of the cured specimens was monited by near-infrared spectroscopy and thermogravimetric analysis, respectively. Also, the critical stress intensity factor (K{sub 1C}) test of the cured specimens was performed to study the mechanical interfacial properties. As a result, the decreases of short side-chide structure and chain scission were observed in NIR measurements as the DGEBA content increases, resulting in varying the hydroxyl and carbonyl groups. And, the initial decomposition temperature (IDT), temperature of maximum weight loss (T{sub max}), and decomposition activation energy (E{sub d}) as thermal stability factors were increased with increasing the DGEBA content. These results could be explained by mean of decreasing viscosity, stable aromatic ring structure, and grafted interpenetrating polymer network with increasing of DGEBA content. Also, the maximum K{sub 1C} value showed at mixing ratio of 40:60 wt% in this blend system. (author). 22 refs., 2 tabs., 6 figs.

  2. Enhancing Brief Cognitive Behavioral Therapy with Motivational Enhancement Techniques in Cocaine Users

    Science.gov (United States)

    McKee, Sherry A.; Carroll, Kathleen M.; Sinha, Rajita; Robinson, Jane E.; Nich, Charla; Cavallo, Dana; O’Malley, Stephanie

    2008-01-01

    Background We investigated the impact of enhancing brief cognitive behavioral therapy with motivational interviewing techniques for cocaine abuse or dependence, using a focused intervention paradigm. Methods Participants (n=74) who met current criteria for cocaine abuse or dependence were randomized to 3-session cognitive behavioral therapy (CBT) or 3-session enhanced CBT (MET + CBT), which included an initial session of motivational enhancement therapy (MET). Outcome measures included treatment retention, process measures (e.g., commitment to abstinence, satisfaction with treatment), and cocaine use. Results Participants who received the MET+CBT intervention attended more drug treatment sessions following the study interventions, reported significantly greater desire for abstinence and expectation of success, and they expected greater difficulty in maintaining abstinence compared to the CBT condition. There were no differences across treatment conditions on cocaine use. Conclusions These findings offer mixed support for the addition of MET as an adjunctive approach to CBT for cocaine users. In addition, the study provides evidence for the feasibility of using short-term studies to test the effects of specific treatment components or refinements on measures of therapy process and outcome. PMID:17573205

  3. Southern European ionospheric TEC maps based on Kriging technique to monitor ionosphere behavior

    Science.gov (United States)

    Rodríguez-Bouza, Marta; Paparini, Claudia; Otero, Xurxo; Herraiz, Miguel; Radicella, Sandro M.; Abe, Oladipo E.; Rodríguez-Caderot, Gracia

    2017-10-01

    Global or regional Maps of the ionospheric Total Electron Content (TEC) are an efficient tool to monitor the delay introduced by the ionosphere in the satellite signals. Ionospheric disturbance periods are of particular interest because these conditions can strongly affect satellite navigation range measurements. This work presents post-processing regional vertical TEC maps over Southern Europe ([35°N-50°N] latitude) obtained by applying Kriging interpolation to GPS derived TEC over more than 100 Global Navigation Satellite System (GNSS) stations. These maps are used to study the behavior of the ionosphere during space weather events and their effects. To validate these maps, hereafter called Southern European Ionospheric Maps (SEIMs), their TEC values have been compared with those obtained from EGNOS Message Server (EMS) and with direct experimental TEC data from GNSS stations. Ionospheric space weather events related to geomagnetic storms of March 17th, 2013, February 19th, 2014 and March 17th, 2015 have been selected. To test the methodology, one period of quiet days has been also analyzed. TEC values obtained by SEIMs in the Ionospheric Grid Points (IGPs) defined by EGNOS are very close to those given by EMS and in the period of major geomagnetic storms the difference does not exceed 6 TEC units. These results confirm the good performance of the technique used for obtaining the SEIMs that can be a useful tool to study the ionosphere behavior during geomagnetic storms and their effects in the region of interest.

  4. USING THE DELPHI TECHNIQUE TO DEVELOP EFFECTIVENESS INDICATORS FOR SOCIAL MARKETING COMMUNICATION TO REDUCE HEALTH-RISK BEHAVIORS AMONG YOUTH.

    Science.gov (United States)

    Vantamay, Nottakrit

    2015-09-01

    This study aimed to develop effectiveness indicators for social marketing communication to reduce health-risk behaviors among Thai youth by using the Delphi technique. The Delphi technique is a research approach used to gain consensus through a series of two or more rounds of questionnaire surveys where information and results are fed back to panel members between each round and it has been extensively used to generate many indicators relevant to health behaviors. The Delphi technique was conducted in 3 rounds by consulting a panel of 15 experts in the field of social marketing communication for public health campaigns in Thailand. We found forty-nine effectiveness indicators in eight core components reached consensus. These components were: 1) attitude about health-risk behavior reduction, 2) subjective norms, 3) perceived behavioral control, 4) intention to reduce health-risk behaviors, 5) practices for reducing health-risk behaviors, 6) knowledge about the dangers and impact of health-risk behaviors, 7) campaign brand equity, and 8) communication networks. These effectiveness indicators could be applied by health promotion organizations for evaluating the effectiveness of social marketing communication to effectively reduce health-risk behaviors among youth.

  5. Behavioral, psycho-physiological and salivary cortisol modifications after short-term alprazolam treatment in patients with recent myocardial infarction.

    Science.gov (United States)

    Pruneti, Carlo; Giusti, Mariarosa; Boem, Adriano; Luisi, Michele

    2002-01-01

    The aim of this study was to determine the behavioral and physiological effects of the central nervous system depressant alprazolam on a group of cardiac patients. Immediately after hospital discharge, the Crown and Crisp Experiential Index (CCEI) was administered, the salivary cortisol was detected and a psycho-physiological profile was recorded in 52 subjects who had suffered from myocardial infarction. Half of the subjects represented the experimental group and the remaining 26 individuals acted as a control group not undergoing treatment. The benzodiazepine alprazolam (0.25 mg) was administered twice daily to the treated group only. With the exception of the administration of the drug, all recruited subjects underwent the same clinical evaluation. The CCEI data of the treated group showed significant decreases for the following scales: free floating anxiety (p anxiety (p < 0.01), somatic complaints (p < 0.05), and depression (p < 0.01). In the same group, with regard to the physiological parameters, the skin conductance response significantly decreased during the baseline phase (p < 0.01), and almost all parameters showed decreased values during mental stress test administration. Cortisol levels also decreased during the recovery phase of the psycho-physiological profile assessment. Alprazolam seems to be able to reduce sympathetic discharge and some stress-related behavioral and physiological responses. This could be of benefit for selected cardiac patients for whom increases in sympathetic tone may constitute a risk factor.

  6. Creep deformation behavior in eutectic Sn-Ag solder joints using a novel mapping technique

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, J.P.; Guo, F.; McDougall, J.; Bieler, T.R.; Subramanian, K.N.; Park, J.K.

    1999-11-01

    Creep deformation behavior was measured for 60--100 {micro}m thick solder joints. The solder joints investigated consisted of: (1) non-composite solder joints made with eutectic Sn-Ag solder, and (2) composite solder joints with eutectic Sn-Ag solder containing 20 vol.%, 5 {micro}m diameter in-situ Cu{sub 6}Sn{sub 5} intermetallic reinforcements. All creep testing in this study was carried out at room temperature. Qualitative and quantitative assessment of creep deformation was characterized on the solder joints. Creep deformation was analyzed using a novel mapping technique where a geometrical-regular line pattern was etched over the entire solder joint using excimer laser ablation. During creep, the laser-ablation (LA) pattern becomes distorted due to deformation in the solder joint. By imaging the distortion of laser-ablation patterns using the SEM, actual deformation mapping for the entire solder joint is revealed. The technique involves sequential optical/digital imaging of the deformation versus time history during creep. By tracing and recording the deformation of the LA patterns on the solder over intervals of time, local creep data are obtained in many locations in the joint. This analysis enables global and localized creep shear strains and strain rate to be determined.

  7. Surface properties and corrosion behavior of Co-Cr alloy fabricated with selective laser melting technique.

    Science.gov (United States)

    Xin, Xian-zhen; Chen, Jie; Xiang, Nan; Wei, Bin

    2013-01-01

    We sought to study the corrosion behavior and surface properties of a commercial cobalt-chromium (Co-Cr) alloy which was fabricated with selective laser melting (SLM) technique. For this purpose, specimens were fabricated using different techniques, such as SLM system and casting methods. Surface hardness testing, microstructure observation, surface analysis using X-ray photoelectron spectroscopy (XPS) and electrochemical corrosion test were carried out to evaluate the corrosion properties and surface properties of the specimens. We found that microstructure of SLM specimens was more homogeneous than that of cast specimens. The mean surface hardness values of SLM and cast specimens were 458.3 and 384.8, respectively; SLM specimens showed higher values than cast ones in hardness. Both specimens exhibited no differences in their electrochemical corrosion properties in the artificial saliva through potentiodynamic curves and EIS, and no significant difference via XPS. Therefore, we concluded that within the scope of this study, SLM-fabricated restorations revealed good surface properties, such as proper hardness, homogeneous microstructure, and also showed sufficient corrosion resistance which could meet the needs of dental clinics.

  8. Sex-dependent modification by chronic caffeine of acute methamphetamine effects on anxiety-related behavior in rats.

    Science.gov (United States)

    Hughes, Robert N; Hamilton, Jennifer J

    2018-06-01

    For fourteen days, male and female PVG/c hooded rats were provided continuously with either pure drinking water, or water containing caffeine in a quantity approximating a daily dose of 31.1 mg/kg. Then at intervals of 3 days, they were administered 1, 2 mg/kg methamphetamine (MA) or saline before being tested for anxiety-related behavior in a zero maze or a light/dark box, or their short-term spatial memory was assessed in a Y maze following introduction of a novel brightness change in one of the arms. Each rat experienced each type of apparatus with the same acute MA or saline treatment while still exposed to chronic caffeine or pure drinking water. While chronic caffeine on its own did not affect any behavioral measure, acute MA was anxiolytic for male rats suggested by increased entries and occupancy of zero-maze enclosed areas, and decreased emergence latencies and increased entries into the light/dark-box light compartment. Females were less affected than males by MA in both types of apparatus unless they also consumed caffeine. For male rats, choices of the Y-maze novel arm were affected by neither caffeine nor MA, but for females provided with unadulterated water, such choices were reduced by 1 mg/kg MA but increased for those exposed to caffeine, thereby suggesting either impaired or improved memory respectively. However, changes in anxiety could also explain these results. Overall, results generated in the three types of apparatus supported potentiation by caffeine of any effects of MA on anxiety for females only. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. Stress Management Apps With Regard to Emotion-Focused Coping and Behavior Change Techniques: A Content Analysis.

    Science.gov (United States)

    Christmann, Corinna Anna; Hoffmann, Alexandra; Bleser, Gabriele

    2017-02-23

    Chronic stress has been shown to be associated with disease. This link is not only direct but also indirect through harmful health behavior such as smoking or changing eating habits. The recent mHealth trend offers a new and promising approach to support the adoption and maintenance of appropriate stress management techniques. However, only few studies have dealt with the inclusion of evidence-based content within stress management apps for mobile phones. The aim of this study was to evaluate stress management apps on the basis of a new taxonomy of effective emotion-focused stress management techniques and an established taxonomy of behavior change techniques. Two trained and independent raters evaluated 62 free apps found in Google Play with regard to 26 behavior change and 15 emotion-focused stress management techniques in October 2015. The apps included an average of 4.3 behavior change techniques (SD 4.2) and 2.8 emotion-focused stress management techniques (SD 2.6). The behavior change technique score and stress management technique score were highly correlated (r=.82, P=.01). The broad variation of different stress management strategies found in this sample of apps goes in line with those found in conventional stress management interventions and self-help literature. Moreover, this study provided a first step toward more detailed and standardized taxonomies, which can be used to investigate evidence-based content in stress management interventions and enable greater comparability between different intervention types. ©Corinna Anna Christmann, Alexandra Hoffmann, Gabriele Bleser. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 23.02.2017.

  10. Modification of tribology and high-temperature behavior of Ti-48Al-2Cr-2Nb intermetallic alloy by laser cladding

    International Nuclear Information System (INIS)

    Liu Xiubo; Wang Huaming

    2006-01-01

    In order to improve the tribology and high-temperature oxidation properties of the Ti-48Al-2Cr-2Nb intermetallic alloy simultaneously, mixed NiCr-Cr 3 C 2 precursor powders had been investigated for laser cladding treatment to modify wear and high-temperature oxidation resistance of the material. The alloy samples were pre-placed with NiCr-80, 50 and 20%Cr 3 C 2 (wt.%), respectively, and laser treated at the same parameters, i.e., laser output power 2.8 kW, beam scanning speed 2.0 mm/s, beam dimension 1 mm x 18 mm. The treated samples underwent tests of microhardness, wear and high-temperature oxidation. The results showed that laser cladding with different constitution of mixed precursor NiCr-Cr 3 C 2 powders improved surface hardness in all cases. Laser cladding with NiCr-50%Cr 3 C 2 resulted in the best modification of tribology and high-temperature oxidation behavior. X-ray diffraction (XRD), optical microscope (OM), scanning electron microscopy (SEM) and energy-dispersive spectrometer (EDS) analyses indicated that the formation of reinforced Cr 7 C 3 , TiC and both continuous and dense Al 2 O 3 , Cr 2 O 3 oxide scales were supposed to be responsible for the modification of the relevant properties. As a result, the present work had laid beneficial surface engineering foundation for TiAl alloy applied as future light weight and high-temperature structural candidate materials

  11. A cross-bridge based model of force depression: Can a single modification address both transient and steady-state behaviors?

    Science.gov (United States)

    Corr, David T; Herzog, Walter

    2016-03-21

    Force depression (FD), the reduction of isometric force following active shortening, is a phenomenon of skeletal muscle that has received significant attention in biomechanical and physiological literature, yet the mechanisms underlying FD remain unknown. Recent experiments identified a slower rate of force redevelopment with increasing amounts of steady-state FD, suggesting that FD may be caused, at least in part, by a decrease in cross-bridge binding rate (Corr and Herzog, 2005; Koppes et al., 2014). Herein, we develop a cross-bridge based model of FD in which the binding rate function, f, decreases with the mechanical work performed during shortening. This modification incorporates a direct relationship between steady-state FD and muscle mechanical work (Corr and Herzog, 2005; Herzog et al., 2000; Kosterina et al., 2008), and is consistent with a proposed mechanism attributing FD to stress-induced inhibition of cross-bridge attachments (Herzog, 1998; Maréchal and Plaghki, 1979). Thus, for an increase in mechanical work, the model should predict a slower force redevelopment (decreased attachment rate) to a more depressed steady-state force (fewer attached cross-bridges), and a reduction in contractile element stiffness (Ford et al., 1981). We hypothesized that since this modification affects the cross-bridge kinetics, a corresponding model would be able to account for both transient and steady-state FD behaviors. Comparisons to prior experiments (Corr and Herzog, 2005; Herzog et al., 2000; Kosterina et al., 2008) show that both steady-state and transient aspects of FD, as well as the relationship of FD with respect to speed and amplitude of shortening, are well captured by this model. Thus, this relatively simple cross-bridge based model of FD lends support to a mechanism involving the inhibition of cross-bridge binding, and indicates that cross-bridge kinetics may play a critical role in FD. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Effect of micro-environment modification and polymer type on the in-vitro dissolution behavior and in-vivo performance of amorphous solid dispersions.

    Science.gov (United States)

    Sun, Weiwei; Pan, Baoliang

    2017-06-15

    This study investigates the effects of micro-environment modification and polymer type on the in-vitro dissolution behavior and in-vivo performance of micro-environment pH modifying solid dispersions (pH M -SD) for the poorly water-soluble model drug Toltrazuril (TOL). Various pH M -SDs were prepared using Ca(OH) 2 as a pH-modifier in hydrophilic polymers, including polyethylene glycol 6000 (PEG6000), polyvinylpyrrolidone k30 (PVPk30) and hydroxypropyl methylcellulose (HPMC). Based on the results of physicochemical characterizations and in-vitro dissolution testing, the representative ternary (Ca(OH) 2 :TOL:PEG6000/HPMC/PVPk30=1:8:24, w/w/w) and binary (TOL:PVPk30=1:3, w/w) solid dispersions were selected and optimized to perform in-vivo pharmacokinetic study. The micro-environment pH modification improved the in-vitro water-solubility and in-vivo bioavailability of parent drug TOL. Furthermore, the addition of alkalizers not only enhanced the release and absorption of prototype drug, but also promoted the generation of active metabolites, including toltrazuril sulfoxide (TOLSO) and toltrazuril sulfone (TOLSO 2 ). The in-vitro dissolution profiles and in-vivo absorption, distribution and metabolism behaviors of the pH M -SDs varied with polymer type. Moreover, in-vivo bioavailability of three active pharmaceutical ingredients increased with an increase in in-vitro dissolution rates of the drug from the pH M -SDs prepared with various polymers. Therefore, a non-sink in-vitro dissolution method can be used to predict the in-vivo performance of pH M -SDs formulated with various polymers with trend consistency. In-vitro and in-vivo screening procedures revealed that the pH M -SD composed of Ca(OH) 2 , TOL and PVPk30 at a weight ratio of 1:8:24, of which the safety was adequately proved via histopathological examination, may be a promising candidate for providing better clinical outcomes. Copyright © 2017. Published by Elsevier B.V.

  13. Effect of Bronchodilation and Exercise Training with Behavior Modification on Exercise Tolerance and Downstream Effects on Symptoms and Physical Activity in COPD.

    Science.gov (United States)

    Troosters, Thierry; Maltais, François; Leidy, Nancy; Lavoie, Kim L; Sedeno, Maria; Janssens, Wim; Garcia-Aymerich, Judith; Erzen, Damijan; De Sousa, Dorothy; Korducki, Lawrence; Hamilton, Alan; Bourbeau, Jean

    2018-04-17

    Bronchodilation and exercise training (ExT) improve exercise tolerance in patients with chronic obstructive pulmonary disease (COPD); however, behavior modification is required to impact on daily physical activity (PA). To assess whether tiotropium/olodaterol, ±ExT, would improve exercise endurance time (EET) and PA compared with placebo in patients participating in a self-management behavior-modification (SMBM) program. A 12-week, randomized, partially double-blind, placebo-controlled, parallel-group trial in patients with COPD (PHYSACTO®; NCT02085161). All patients were enrolled into SMBM and randomized 1:1:1:1 to once-daily placebo, tiotropium 5 µg, tiotropium/olodaterol 5/5 µg, or tiotropium/olodaterol 5/5 µg plus 8 weeks ExT. EET, measured by endurance shuttle walk test after 8 weeks, was the primary endpoint. Additional endpoints assessed downstream effects on PA (measured via accelerometry), and activity-related dyspnea and difficulty (using validated patient-reported questionnaires). SMBM + tiotropium/olodaterol, ±ExT, significantly improved EET at Week 8 versus SMBM + placebo (treatment ratio versus placebo: with ExT 1.46 [95% CI: 1.20, 1.78]; P=0.0002; without ExT 1.29 [1.06, 1.57]; P=0.0109). No significant increases in steps per day from baseline were observed over SMBM + placebo at Week 12 (increase of 1,098) when other therapies were added. Adding tiotropium/olodaterol, ±ExT, to SMBM reduced activity-related dyspnea versus placebo, while adding tiotropium/olodaterol + ExT reduced activity-related difficulty. Tiotropium/olodaterol, ±ExT, improved EET in patients with COPD taking part in an SMBM program. Combination bronchodilation, ±ExT, did not provide additional increases in objective PA compared with SMBM alone, but did reduce physical activity-related dyspnea and difficulty. Clinical trial registration available at www.clinicaltrials.gov, ID NCT02085161.

  14. Diagnostic evaluation of rolling behavior in ball bearings by ultrasonic technique

    International Nuclear Information System (INIS)

    Wakabayashi, T

    2012-01-01

    Failures of machines having rotating parts are mostly caused by damage to bearings and there exist increasing demands for detecting damaged bearings at an early stage. However, conventional diagnostic methods, such as measuring temperature and observing vibration, have found difficulties in performing the early detection, so that more advanced diagnosis is necessary. This study therefore applies an ultrasonic technique as an advanced diagnostic method to bearing life tests. Ultrasonic wave pulses (UWP) emitted from a piezoelectric UWP generator can partially reflect from the interfaces of contact zones within the housing and the bearing with regard to the different acoustic impedance between a solid-to-solid contact and a contact dominated by some fluid layers. Hence, the intensity of the resultant UWP echoes can be determined by the real contact area formed at the interfaces. The experimental results of UWP echoes under the different operating conditions have demonstrated that the time intervals between peaks of UWP echoes varied in accordance with the movement of rolling balls and the lubricating phenomena in bearings. This behavior has further suggested the possibility of the early detection of abnormalities in ball bearings by using the variation in UWP echoes.

  15. Analysis of abrasive wear behavior of PTFE composite using Taguchi’s technique

    Directory of Open Access Journals (Sweden)

    Yusuf Şahin

    2015-12-01

    Full Text Available Polymeric composites are widely used for structural, aerospace, and automobile sectors due to their good combination of high specific strength and specific modulus. These two main characteristics make these materials attractive, compared to conventional materials like metal or alloy ones. Some of their typical benefits include easy processing, corrosion resistance, low friction, and damping of noise and vibrations. Wear behavior of Polytetrafluoroethylenes (PTFE and its composites including glass-filled composites and carbon-filled composites are investigated using a pin-on-disc configuration. A plan of experiments in terms of Taguchi technique is carried out to acquire data in controlled way. An orthogonal array (L9 and the analysis of variance are employed to investigate the influence of process parameters on the wear of these composites. Volume loss increased with abrasive size, load, and distance. Furthermore, specific wear rate decreased with increasing grit size, load, sliding distance, whereas, slightly with compressive strength. Optimal process parameters, which minimize the volume loss, were the factor combinations of L1, G3, D1, and C3. Confirmation experiments were conducted to verify the optimal testing parameters. It was found that in terms of volume loss, there was a good agreement between the estimated and the experimental value of S/N ratio with an error of 1.604%. Moreover, abrasive size, load, and sliding distance exerted a great effect on the specific wear rate, at 51.14, 27.77, and 14.70%, respectively.

  16. Impact of practice and of technical modifications on acute morbidity after prostate curie-therapy; Impact de l'experience et des modifications techniques sur la morbidite aigue apres curietherapie de prostate

    Energy Technology Data Exchange (ETDEWEB)

    Le Fur, E.; Malhaire, J.P.; Pradier, O. [CHU Morvan, Brest (France); Valeri, A. [CHU Cavale-Blanche, Brest (France)

    2011-10-15

    Based on a cohort of 150 patients treated by curie-therapy for a prostate cancer, the authors report the analysis of the influence of some technical modifications (use of an automatic stepper at the beginning of a second period, and of a high frequency echographic probe during a third period) on the urinary toxicity. This toxicity has been assessed by using the urinary retention rate, and the difference between the maximum and initial International Prostate Symptom Score (IPPS). Rectal morbidity has been scaled according to a modified Radiation Therapy Oncology Group (RTOG) scale. It appears that the occurrence of urinary retention after prostate radiotherapy decreases with practice and use of the automatic stepper. It seems that there is no impact on urinary morbidity (urinary retention excluded) nor on rectal morbidity. Short communication

  17. Effect of cerium on structure modifications of a hybrid sol–gel coating, its mechanical properties and anti-corrosion behavior

    International Nuclear Information System (INIS)

    Cambon, Jean-Baptiste; Esteban, Julien; Ansart, Florence; Bonino, Jean-Pierre; Turq, Viviane; Santagneli, S.H.; Santilli, C.V.; Pulcinelli, S.H.

    2012-01-01

    Highlights: ► New sol–gel routes to replace chromates for corrosion protection of aluminum. ► Effect of cerium concentration on the microstructure of xerogel. ► Electrochemical and mechanical performances of hybrid coating with different cerium contents. ► Good correlation between the different results with an optimal cerium content of 0.01 M. -- Abstract: An organic–inorganic hybrid coating was developed to improve the corrosion resistance of the aluminum alloy AA 2024-T3. Organic and inorganic coatings derived from glycidoxypropyl-trimethoxysilane (GPTMS) and aluminum tri-sec-butoxide Al(O s Bu) 3 , with different cerium contents, were deposited onto aluminum by dip-coating process. Corrosion resistance and mechanical properties were investigated by electrochemical impedance measurements and nano-indentation respectively. An optimal cerium concentration of 0.01 M was evidenced. To correlate and explain the hybrid coating performances in relation to the cerium content, NMR experiments were performed. It has been shown that when the cerium concentration in the hybrid is higher than 0.01 M there are important modifications in the hybrid structure that account for the mechanical properties and anti-corrosion behavior of the sol–gel coating.

  18. Can We Selectively Reduce Appetite for Energy-Dense Foods? An Overview of Pharmacological Strategies for Modification of Food Preference Behavior.

    Science.gov (United States)

    Bojanowska, Ewa; Ciosek, Joanna

    2016-01-01

    Excessive intake of food, especially palatable and energy-dense carbohydrates and fats, is largely responsible for the growing incidence of obesity worldwide. Although there are a number of candidate antiobesity drugs, only a few of them have been proven able to inhibit appetite for palatable foods without the concurrent reduction in regular food consumption. In this review, we discuss the interrelationships between homeostatic and hedonic food intake control mechanisms in promoting overeating with palatable foods and assess the potential usefulness of systemically administered pharmaceuticals that impinge on the endogenous cannabinoid, opioid, aminergic, cholinergic, and peptidergic systems in the modification of food preference behavior. Also, certain dietary supplements with the potency to reduce specifically palatable food intake are presented. Based on human and animal studies, we indicate the most promising therapies and agents that influence the effectiveness of appetite-modifying drugs. It should be stressed, however, that most of the data included in our review come from preclinical studies; therefore, further investigations aimed at confirming the effectiveness and safety of the aforementioned medications in the treatment of obese humans are necessary.

  19. The Relationship between Instructor Misbehaviors and Student Antisocial Behavioral Alteration Techniques: The Roles of Instructor Attractiveness, Humor, and Relational Closeness

    Science.gov (United States)

    Claus, Christopher J.; Booth-Butterfield, Melanie; Chory, Rebecca M.

    2012-01-01

    Using rhetorical/relational goal theory as a guiding frame, we examined relationships between instructor misbehaviors (i.e., indolence, incompetence, and offensiveness) and the likelihood of students communicating antisocial behavioral alteration techniques (BATs). More specifically, the study focused on whether students' perceptions of instructor…

  20. Use of Behavioral Disciplinary Techniques with the Implementation of SWPBIS and Its Impact on Students' Prosocial Motivation

    Science.gov (United States)

    Blank, Jessica C.

    2013-01-01

    This study was aimed to investigate the potential negative impact that positive (e.g., praise and rewards) and punitive (e.g., sending students to the office) disciplinary techniques, commonly used within the Schoolwide Positive Behavioral Interventions and Supports (SWPBIS) approach, have on students' prosocial motivation, and how aspects of…

  1. Towards representing human behavior and decision making in Earth system models - an overview of techniques and approaches

    Science.gov (United States)

    Müller-Hansen, Finn; Schlüter, Maja; Mäs, Michael; Donges, Jonathan F.; Kolb, Jakob J.; Thonicke, Kirsten; Heitzig, Jobst

    2017-11-01

    Today, humans have a critical impact on the Earth system and vice versa, which can generate complex feedback processes between social and ecological dynamics. Integrating human behavior into formal Earth system models (ESMs), however, requires crucial modeling assumptions about actors and their goals, behavioral options, and decision rules, as well as modeling decisions regarding human social interactions and the aggregation of individuals' behavior. Here, we review existing modeling approaches and techniques from various disciplines and schools of thought dealing with human behavior at different levels of decision making. We demonstrate modelers' often vast degrees of freedom but also seek to make modelers aware of the often crucial consequences of seemingly innocent modeling assumptions. After discussing which socioeconomic units are potentially important for ESMs, we compare models of individual decision making that correspond to alternative behavioral theories and that make diverse modeling assumptions about individuals' preferences, beliefs, decision rules, and foresight. We review approaches to model social interaction, covering game theoretic frameworks, models of social influence, and network models. Finally, we discuss approaches to studying how the behavior of individuals, groups, and organizations can aggregate to complex collective phenomena, discussing agent-based, statistical, and representative-agent modeling and economic macro-dynamics. We illustrate the main ingredients of modeling techniques with examples from land-use dynamics as one of the main drivers of environmental change bridging local to global scales.

  2. Application of isotope tracer technique on the study of the filling and release behavior of carbon nanotubes

    International Nuclear Information System (INIS)

    Wu Shengwei; Guo Jinxue; Li Yan; Li Yulan; Li Wenxin; Liu Shiyuan

    2004-01-01

    The behaviors of washing and release of 110 Ag m -AgNO 3 from carbon nanotubes (CNTs), following soak of opened CNTs in 110 Ag m -AgNO 3 solutions are investigated with the isotope tracer technique. The filled CNTs samples are characterized by HREM, SEM, XRD and EDS. The amount of filled materials is also estimated by the isotope tracer technique. It shows that there are silver materials filled in the CNTs and would not release from the cavities. The results indicate that radioactive tracer is an effective and powerful technique to be applied into study of filling and release behaviors of CNTs as well as estimating the amount of filled materials. (authors)

  3. Effect of modifications in mineralized collagen fibril and extra-fibrillar matrix material properties on submicroscale mechanical behavior of cortical bone.

    Science.gov (United States)

    Wang, Yaohui; Ural, Ani

    2018-06-01

    A key length scale of interest in assessing the fracture resistance of bone is the submicroscale which is composed of mineralized collagen fibrils (MCF) and extra-fibrillar matrix (EFM). Although the processes through which the submicroscale constituents of bone contribute to the fracture resistance in bone have been identified, the extent of the modifications in submicroscale mechanical response due to the changes in individual properties of MCFs and EFM has not been determined. As a result, this study aims to quantify the influence of individual MCF and EFM material property modifications on the mechanical behavior (elastic modulus, ultimate strength, and resistance to failure) of bone at the submicroscale using a novel finite element modeling approach that incorporate 3D networks of MCFs with three different orientations as well as explicit representation of EFM. The models were evaluated under tensile loading in transverse (representing MCF separation) and longitudinal (representing MCF rupture) directions. The results showed that the apparent elastic modulus at the submicroscale under both loading directions for all orientations was only affected by the change in the elastic modulus of MCFs. MCF separation and rupture strengths were mainly dependent on the ultimate strength of EFM and MCFs, respectively, with minimal influence of other material properties. The extent of damage during MCF separation increased with increasing ultimate strength of EFM and decreased with increasing fracture energy of EFM with minimal contribution from elastic modulus of MCFs. For MCF rupture, there was an almost one-to-one linear relationship between the percent change in fracture energy of MCFs and the percent change in the apparent submicroscale fracture energy. The ultimate strength and elastic modulus of MCFs had moderate to limited influence on the MCF rupture fracture energy. The results of this study quantified the extent of changes that may be seen in the energy

  4. Therapists' self-reported drift from dialectical behavior therapy techniques for eating disorders.

    Science.gov (United States)

    Wisniewski, Lucene; Hernandez Hernandez, Maria Elena; Waller, Glenn

    2018-01-01

    Research has shown that clinicians underuse or omit techniques that constitute an essential part of evidence-based therapies. However, it is not known whether this is the case in DBT for eating disorders. The aims of this study were; 1) exploring the extent to which DBT techniques were used by self-identified DBT clinicians treating eating disorders; 2) determining whether therapists fell into distinct groups, based on their usage of DBT techniques; and 3) examining whether clinician characteristics were related to the use of such techniques. Seventy-three clinicians offering DBT for eating disorders completed an online survey about their use of specific DBT techniques. They also completed measures of personality and intolerance of uncertainty. In relation to the first aim, the pattern of use of DBT techniques showed a bimodal distribution - most were used either a lot or a little. Considering the second aim, clinicians fell into two groups according to the techniques that they delivered - one characterized by a higher use of DBT techniques and the other by a higher use of techniques that were specific to the treatment of eating disorders, rather than DBT methods. Finally, more experienced clinicians were more likely to be in the 'DBT technique-focused' group. DBT clinicians are encouraged to implement both sets of techniques (DBT techniques and standard techniques for the treatment of eating disorders) in an integrated way. Training, supervision and the use of manuals are recommended to decrease therapist drift in DBT. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Modeling as a Technique for Promoting Classroom Learning and Prosocial Behavior. Theoretical Paper No. 39.

    Science.gov (United States)

    Frayer, Dorothy A.; Klausmeier, Herbert J.

    Research has shown that a behavior may be acquired through observing and imitating a model. A behavior which has already been acquired may be inhibited, disinhibited, or elicited by observing and imitating. A definition of imitation is given, and the effects of imitation on learning and performance are summarized. Research on factors which affect…

  6. A cell culture technique for human epiretinal membranes to describe cell behavior and membrane contraction in vitro.

    Science.gov (United States)

    Wertheimer, Christian; Eibl-Lindner, Kirsten H; Compera, Denise; Kueres, Alexander; Wolf, Armin; Docheva, Denitsa; Priglinger, Siegfried G; Priglinger, Claudia; Schumann, Ricarda G

    2017-11-01

    To introduce a human cell culture technique for investigating in-vitro behavior of primary epiretinal cells and membrane contraction of fibrocellular tissue surgically removed from eyes with idiopathic macular pucker. Human epiretinal membranes were harvested from ten eyes with idiopathic macular pucker during standard vitrectomy. Specimens were fixed on cell culture plastic using small entomological pins to apply horizontal stress to the tissue, and then transferred to standard cell culture conditions. Cell behavior of 400 epiretinal cells from 10 epiretinal membranes was observed in time-lapse microscopy and analyzed in terms of cell migration, cell velocity, and membrane contraction. Immunocytochemistry was performed for cell type-specific antigens. Cell specific differences in migration behavior were observed comprising two phenotypes: (PT1) epiretinal cells moving fast, less directly, with small round phenotype and (PT2) epiretinal cells moving slowly, directly, with elongated large phenotype. No mitosis, no outgrowth and no migration onto the plastic were seen. Horizontal contraction measurements showed variation between specimens. Masses of epiretinal cells with a myofibroblast-like phenotype expressed cytoplasmatic α-SMA stress fibers and correlated with cell behavior characteristics (PT2). Fast moving epiretinal cells (PT1) were identified as microglia by immunostaining. This in-vitro technique using traction application allows for culturing surgically removed epiretinal membranes from eyes with idiopathic macular pucker, demonstrating cell behavior and membrane contraction of primary human epiretinal cells. Our findings emphasize the abundance of myofibroblasts, the presence of microglia and specific differences of cell behavior in these membranes. This technique has the potential to improve the understanding of pathologies at the vitreomacular interface and might be helpful in establishing anti-fibrotic treatment strategies.

  7. Mechanisms of metabonomic for a gateway drug: nicotine priming enhances behavioral response to cocaine with modification in energy metabolism and neurotransmitter level.

    Directory of Open Access Journals (Sweden)

    Hongyu Li

    Full Text Available Nicotine, one of the most commonly used drugs, has become a major concern because tobacco serves as a gateway drug and is linked to illicit drug abuse, such as cocaine and marijuana. However, previous studies mainly focused on certain genes or neurotransmitters which have already been known to participate in drug addiction, lacking endogenous metabolic profiling in a global view. To further explore the mechanism by which nicotine modifies the response to cocaine, we developed two conditioned place preference (CPP models in mice. In threshold dose model, mice were pretreated with nicotine, followed by cocaine treatment at the dose of 2 mg/kg, a threshold dose of cocaine to induce CPP in mice. In high-dose model, mice were only treated with 20 mg/kg cocaine, which induced a significant CPP. (1H nuclear magnetic resonance based on metabonomics was used to investigate metabolic profiles of the nucleus accumbens (NAc and striatum. We found that nicotine pretreatment dramatically increased CPP induced by 2 mg/kg cocaine, which was similar to 20 mg/kg cocaine-induced CPP. Interestingly, metabolic profiles showed considerable overlap between these two models. These overlapped metabolites mainly included neurotransmitters as well as the molecules participating in energy homeostasis and cellular metabolism. Our results show that the reinforcing effect of nicotine on behavioral response to cocaine may attribute to the modification of some specific metabolites in NAc and striatum, thus creating a favorable metabolic environment for enhancing conditioned rewarding effect of cocaine. Our findings provide an insight into the effect of cigarette smoking on cocaine dependence and the underlying mechanism.

  8. Effect of Combined Systematized Behavioral Modification Education Program With Desmopressin in Patients With Nocturia: A Prospective, Multicenter, Randomized, and Parallel Study

    Directory of Open Access Journals (Sweden)

    Sung Yong Cho

    2014-12-01

    Full Text Available Purpose The aims of this study were to investigate the efficacy of combining the systematized behavioral modification program (SBMP with desmopressin therapy and to compare this with desmopressin monotherapy in the treatment of nocturnal polyuria (NPU. Methods Patients were randomized at 8 centers to receive desmopressin monotherapy (group A or combination therapy, comprising desmopressin and the SBMP (group B. Nocturia was defined as an average of 2 or more nightly voids. The primary endpoint was a change in the mean number of nocturnal voids from baseline during the 3-month treatment period. The secondary endpoints were changes in the bladder diary parameters and questionnaires scores, and improvements in self-perception for nocturia. Results A total of 200 patients were screened and 76 were excluded from the study, because they failed the screening process. A total of 124 patients were randomized to receive treatment, with group A comprising 68 patients and group B comprising 56 patients. The patients' characteristics were similar between the groups. Nocturnal voids showed a greater decline in group B (-1.5 compared with group A (-1.2, a difference that was not statistically significant. Significant differences were observed between groups A and B with respect to the NPU index (0.37 vs. 0.29, P=0.028, the change in the maximal bladder capacity (-41.3 mL vs. 13.3 mL, P<0.001, and the rate of patients lost to follow up (10.3% [7/68] vs. 0% [0/56], P=0.016. Self-perception for nocturia significantly improved in both groups. Conclusions Combination treatment did not have any additional benefits in relation to reducing nocturnal voids in patients with NPU; however, combination therapy is helpful because it increases the maximal bladder capacity and decreases the NPI. Furthermore, combination therapy increased the persistence of desmopressin in patients with NPU.

  9. An approach to modeling operator's cognitive behavior using artificial intelligence techniques in emergency operating event sequences

    International Nuclear Information System (INIS)

    Cheon, Se Woo; Sur, Sang Moon; Lee, Yong Hee; Park, Young Taeck; Moon, Sang Joon

    1994-01-01

    Computer modeling of an operator's cognitive behavior is a promising approach for the purpose of human factors study and man-machine systems assessment. In this paper, the states of the art in modeling operator behavior and the current status in developing an operator's model (MINERVA - NPP) are presented. The model is constructed as a knowledge-based system of a blackboard framework and is simulated based on emergency operating procedures

  10. Surface Modification of NiTi Alloy via Cathodic Plasma Electrolytic Deposition and its Effect on Ni Ion Release and Osteoblast Behaviors

    International Nuclear Information System (INIS)

    Yan Ying; Cai Kaiyong; Yang Weihu; Liu Peng

    2013-01-01

    To reduce Ni ion release and improve biocompatibility of NiTi alloy, the cathodic plasma electrolytic deposition (CPED) technique was used to fabricate ceramic coating onto a NiTi alloy surface. The formation of a coating with a rough and micro-textured surface was confirmed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, respectively. An inductively coupled plasma mass spectrometry test showed that the formed coating significantly reduced the release of Ni ions from the NiTi alloy in simulated body fluid. The influence of CPED treated NiTi substrates on the biological behaviors of osteoblasts, including cell adhesion, cell viability, and osteogenic differentiation function (alkaline phosphatase), was investigated in vitro. Immunofluorescence staining of nuclei revealed that the CPED treated NiTi alloy was favorable for cell growth. Osteoblasts on CPED modified NiTi alloy showed greater cell viability than those for the native NiTi substrate after 4 and 7 days cultures. More importantly, osteoblasts cultured onto a modified NiTi sample displayed significantly higher differentiation levels of alkaline phosphatase. The results suggested that surface functionalization of NiTi alloy with ceramic coating via the CPED technique was beneficial for cell proliferation and differentiation. The approach presented here is useful for NiTi implants to enhance bone osteointegration and reduce Ni ion release in vitro

  11. Surface Modification of NiTi Alloy via Cathodic Plasma Electrolytic Deposition and its Effect on Ni Ion Release and Osteoblast Behaviors

    Science.gov (United States)

    Yan, Ying; Cai, Kaiyong; Yang, Weihu; Liu, Peng

    2013-07-01

    To reduce Ni ion release and improve biocompatibility of NiTi alloy, the cathodic plasma electrolytic deposition (CPED) technique was used to fabricate ceramic coating onto a NiTi alloy surface. The formation of a coating with a rough and micro-textured surface was confirmed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, respectively. An inductively coupled plasma mass spectrometry test showed that the formed coating significantly reduced the release of Ni ions from the NiTi alloy in simulated body fluid. The influence of CPED treated NiTi substrates on the biological behaviors of osteoblasts, including cell adhesion, cell viability, and osteogenic differentiation function (alkaline phosphatase), was investigated in vitro. Immunofluorescence staining of nuclei revealed that the CPED treated NiTi alloy was favorable for cell growth. Osteoblasts on CPED modified NiTi alloy showed greater cell viability than those for the native NiTi substrate after 4 and 7 days cultures. More importantly, osteoblasts cultured onto a modified NiTi sample displayed significantly higher differentiation levels of alkaline phosphatase. The results suggested that surface functionalization of NiTi alloy with ceramic coating via the CPED technique was beneficial for cell proliferation and differentiation. The approach presented here is useful for NiTi implants to enhance bone osseointegration and reduce Ni ion release in vitro.

  12. The effect of stress management training on stress and depression in women with depression disorders: Using cognitive-behavioral techniques

    OpenAIRE

    Abbasian, Farahzad; Najimi, Arash; Meftagh, Sayyed Davood; Ghasemi, Gholamreza; Afshar, Hamid

    2014-01-01

    Background: The present study aimed to investigate the effect of stress management training through cognitive-behavioral techniques on stress, social adaptability and depression in women with depression disorders. Materials and Methods: In this study, 40 patients diagnosed with depression who had referred to psychiatry and consultation clinics of Isfahan were randomly selected and assigned to intervention and control groups (20 patients in each group). The intervention group received eight 90...

  13. Improving Behavioral Support for Smoking Cessation in Pregnancy: What Are the Barriers to Stopping and Which Behavior Change Techniques Can Influence These? Application of Theoretical Domains Framework.

    Science.gov (United States)

    Campbell, Katarzyna A; Fergie, Libby; Coleman-Haynes, Tom; Cooper, Sue; Lorencatto, Fabiana; Ussher, Michael; Dyas, Jane; Coleman, Tim

    2018-02-17

    Behavioral support interventions are used to help pregnant smokers stop; however, of those tested, few are proven effective. Systematic research developing effective pregnancy-specific behavior change techniques (BCTs) is ongoing. This paper reports contributory work identifying potentially-effective BCTs relative to known important barriers and facilitators (B&Fs) to smoking cessation in pregnancy; to detect priority areas for BCTs development. A Nominal Group Technique with cessation experts ( n = 12) elicited an expert consensus on B&Fs most influencing women's smoking cessation and those most modifiable through behavioral support. Effective cessation interventions in randomized trials from a recent Cochrane review were coded into component BCTs using existing taxonomies. B&Fs were categorized using Theoretical Domains Framework (TDF) domains. Matrices, mapping BCT taxonomies against TDF domains, were consulted to investigate the extent to which BCTs in existing interventions target key B&Fs. Experts ranked "smoking a social norm" and "quitting not a priority" as most important barriers and "desire to protect baby" an important facilitator to quitting. From 14 trials, 23 potentially-effective BCTs were identified (e.g., information about consequences). Most B&Fs fell into "Social Influences", "Knowledge", "Emotions" and "Intentions" TDF domains; few potentially-effective BCTs mapped onto every TDF domain. B&Fs identified by experts as important to cessation, are not sufficiently targeted by BCT's currently within interventions for smoking cessation in pregnancy.

  14. Behavior change techniques used in group-based behavioral support by the English stop-smoking services and preliminary assessment of association with short-term quit outcomes.

    Science.gov (United States)

    West, Robert; Evans, Adam; Michie, Susan

    2011-12-01

    To develop a reliable coding scheme for components of group-based behavioral support for smoking cessation, to establish the frequency of inclusion in English Stop-Smoking Service (SSS) treatment manuals of specific components, and to investigate the associations between inclusion of behavior change techniques (BCTs) and service success rates. A taxonomy of BCTs specific to group-based behavioral support was developed and reliability of use assessed. All English SSSs (n = 145) were contacted to request their group-support treatment manuals. BCTs included in the manuals were identified using this taxonomy. Associations between inclusion of specific BCTs and short-term (4-week) self-reported quit outcomes were assessed. Fourteen group-support BCTs were identified with >90% agreement between coders. One hundred and seven services responded to the request for group-support manuals of which 30 had suitable documents. On average, 7 BCTs were included in each manual. Two were positively associated with 4-week quit rates: "communicate group member identities" and a "betting game" (a financial deposit that is lost if a stop-smoking "buddy" relapses). It is possible to reliably code group-specific BCTs for smoking cessation. Fourteen such techniques are present in guideline documents of which 2 appear to be associated with higher short-term self-reported quit rates when included in treatment manuals of English SSSs.

  15. Microstructural and tribological behavior of in situ synthesized Ti/Co coatings on Ti-6Al-4V alloy using laser surface cladding technique

    CSIR Research Space (South Africa)

    Adesina, OS

    2017-11-01

    Full Text Available properties can be enhanced by appropriate enhancement of the microstructure via surface modification technique without altering the bulk material. In this work, Cp-Ti and Co powders were deposited at different admixed percentages by laser cladding on Ti-6Al-4...

  16. Use of behavioral change techniques in web-based self-management programs for type 2 diabetes patients: systematic review.

    Science.gov (United States)

    van Vugt, Michael; de Wit, Maartje; Cleijne, Wilmy H J J; Snoek, Frank J

    2013-12-13

    Type 2 diabetes mellitus (T2DM) is a highly prevalent chronic metabolic disease characterized by hyperglycemia and cardiovascular risks. Without proper treatment, T2DM can lead to long-term complications. Diabetes self-management is recognized as the cornerstone of overall diabetes management. Web-based self-management programs for T2DM patients can help to successfully improve patient health behaviors and health-related outcomes. Theories can help to specify key determinants of the target behaviors and behavior change strategies required to arrive at the desired health outcomes, which can then be translated into specific behavioral techniques or strategies that patients can learn to apply in their daily life. From previous reviews of a wide range of online diabetes self-management tools and programs, it appears that it is still unclear which behavioral change techniques (BCTs) are primarily used and are most effective when it comes to improving diabetes self-management behaviors and related health outcomes. We set out to identify which BCTs are being applied in online self-management programs for T2DM and whether there is indication of their effectiveness in relation to predefined health outcomes. Articles were systematically searched and screened on the mentioned use of 40 BCTs, which were then linked to reported statistically significant improvements in study outcomes. We found 13 randomized controlled trials reporting on 8 online self-management interventions for T2DM. The BCTs used were feedback on performance, providing information on consequences of behavior, barrier identification/problem solving, and self-monitoring of behavior. These BCTs were also linked to positive outcomes for health behavior change, psychological well-being, or clinical parameters. A relatively small number of theory-based online self-management support programs for T2DM have been reported using only a select number of BCTs. The development of future online self

  17. Alexander Technique Training Coupled With an Integrative Model of Behavioral Prediction in Teachers With Low Back Pain.

    Science.gov (United States)

    Kamalikhah, Tahereh; Morowatisharifabad, Mohammad Ali; Rezaei-Moghaddam, Farid; Ghasemi, Mohammad; Gholami-Fesharaki, Mohammad; Goklani, Salma

    2016-09-01

    Individuals suffering from chronic low back pain (CLBP) experience major physical, social, and occupational disruptions. Strong evidence confirms the effectiveness of Alexander technique (AT) training for CLBP. The present study applied an integrative model (IM) of behavioral prediction for improvement of AT training. This was a quasi-experimental study of female teachers with nonspecific LBP in southern Tehran in 2014. Group A contained 42 subjects and group B had 35 subjects. In group A, AT lessons were designed based on IM constructs, while in group B, AT lessons only were taught. The validity and reliability of the AT questionnaire were confirmed using content validity (CVR 0.91, CVI 0.96) and Cronbach's α (0.80). The IM constructs of both groups were measured after the completion of training. Statistical analysis used independent and paired samples t-tests and the univariate generalized linear model (GLM). Significant differences were recorded before and after intervention (P < 0.001) for the model constructs of intention, perceived risk, direct attitude, behavioral beliefs, and knowledge in both groups. Direct attitude and behavioral beliefs in group A were higher than in group B after the intervention (P < 0.03). The educational framework provided by IM for AT training improved attitude and behavioral beliefs that can facilitate the adoption of AT behavior and decreased CLBP.

  18. The Development of an In-Situ TEM Technique for Studying Corrosion Behavior as Applied to Zirconium-Based Alloys

    Science.gov (United States)

    Harlow, Wayne

    Zirconium-based alloys are a commonly used material for nuclear fuel rod cladding, due to its low neutron cross section and good corrosion properties. However, corrosion is still a limiting factor in fuel rod lifespan, which restricts burn up levels, and thus efficiency, that can be achieved. While long-term corrosion behavior has been studied through both reactor and autoclave samples, the oxide nucleation and growth behavior has not been extensively studied. This work develops a new technique to study the initial stages of corrosion in zirconium-based alloys and the microstructural effects on this process by developing an environmental cell system for the TEM. Nanoscale oxidation parameters are developed, as is a new FIB technique to support this method. Precession diffraction is used in conjunction with in-situ TEM to observe the initial stages of corrosion in these alloys, and oxide thickness is estimated using low-loss EELS. In addition, the stress stabilization of tetragonal ZrO 2 is explored in the context of sample preparation for TEM. It was found that in-situ environmental TEM using an environmental cell replicates the oxidation behavior observed in autoclaved samples in both oxide structure and phases. Utilizing this technique, it was shown that cracking of the oxide layer in zirconium-based alloys is related to oxide relaxation, and not thermal changes. The effect of secondary phase particles on oxidation behavior did not present significant results, however a new method for studying initial oxidation rates using low-loss EELS was developed.

  19. How to bridge the intention-behavior gap in food parenting: Automatic constructs and underlying techniques

    NARCIS (Netherlands)

    Larsen, J.K.; Hermans, R.C.J.; Sleddens, E.F.C.; Vink, J.M.; Kremers, S.P.J.; Ruiter, E.L.M.; Fisher, J.O.

    2018-01-01

    Although parents often report positive intentions to promote and create a healthy food environment for their children (e.g., setting limits to snacks offered), they also experience difficulties in translating these intentions into actual behaviors. In this position paper, we argue that automatic

  20. Do multiple body modifications alter pain threshold?

    Science.gov (United States)

    Yamamotová, A; Hrabák, P; Hříbek, P; Rokyta, R

    2017-12-30

    In recent years, epidemiological data has shown an increasing number of young people who deliberately self-injure. There have also been parallel increases in the number of people with tattoos and those who voluntarily undergo painful procedures associated with piercing, scarification, and tattooing. People with self-injury behaviors often say that they do not feel the pain. However, there is no information regarding pain perception in those that visit tattoo parlors and piercing studios compared to those who don't. The aim of this study was to compare nociceptive sensitivity in four groups of subjects (n=105, mean age 26 years, 48 women and 57 men) with different motivations to experience pain (i.e., with and without multiple body modifications) in two different situations; (1) in controlled, emotionally neutral conditions, and (2) at a "Hell Party" (HP), an event organized by a piercing and tattoo parlor, with a main event featuring a public demonstration of painful techniques (burn scars, hanging on hooks, etc.). Pain thresholds of the fingers of the hand were measured using a thermal stimulator and mechanical algometer. In HP participants, information about alcohol intake, self-harming behavior, and psychiatric history were used in the analysis as intervening variables. Individuals with body modifications as well as without body modifications had higher thermal pain thresholds at Hell Party, compared to thresholds measured at control neutral conditions. No such differences were found relative to mechanical pain thresholds. Increased pain threshold in all HP participants, irrespectively of body modification, cannot be simply explained by a decrease in the sensory component of pain; instead, we found that the environment significantly influenced the cognitive and affective component of pain.

  1. The physicochemical/biological properties of porous tantalum and the potential surface modification techniques to improve its clinical application in dental implantology

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yindong [State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu (China); Bao, Chongyun, E-mail: cybao9933@scu.edu.cn [State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu (China); Wismeijer, Daniel [Department of Oral Implantology and Prosthetic Dentistry, Academic Centre for Dentistry Amsterdam (ACTA), MOVE Research Institute Amsterdam, VU University Amsterdam and University of Amsterdam, Amsterdam (Netherlands); Wu, Gang, E-mail: g.wu@acta.nl [Department of Oral Implantology and Prosthetic Dentistry, Academic Centre for Dentistry Amsterdam (ACTA), MOVE Research Institute Amsterdam, VU University Amsterdam and University of Amsterdam, Amsterdam (Netherlands)

    2015-04-01

    More rapid restoration and more rigid functionality have been pursued for decades in the field of dental implantology. Under such motivation, porous tantalum has been recently introduced to design a novel type of dental implant. Porous tantalum bears interconnected porous structure with pore size ranging from 300 to 600 μm and a porosity of 75–85%. Its elastic modulus (1.3–10 GPa) more closely approximates that of natural cortical (12–18 GPa) and cancellous bone (0.1–0.5 GPa) in comparison with the most commonly used dental materials, such as titanium and titanium alloy (106–115 GPa). Porous tantalum is highly corrosion-resistant and biocompatible. It can significantly enhance the proliferation and differentiation of primary osteoblasts derived from elderly people than titanium. Porous tantalum can allow bone ingrowth and establish not only osseointegration but also osseoincorporation, which will significantly enhance the secondary stability of implants in bone tissue. In this review, we summarize the physicochemical, mechanical and biological properties of porous tantalum. We further discuss the performance of current tantalum dental implants and present the methodologies of surface modifications in order to improve their biological performance.

  2. The physicochemical/biological properties of porous tantalum and the potential surface modification techniques to improve its clinical application in dental implantology

    International Nuclear Information System (INIS)

    Liu, Yindong; Bao, Chongyun; Wismeijer, Daniel; Wu, Gang

    2015-01-01

    More rapid restoration and more rigid functionality have been pursued for decades in the field of dental implantology. Under such motivation, porous tantalum has been recently introduced to design a novel type of dental implant. Porous tantalum bears interconnected porous structure with pore size ranging from 300 to 600 μm and a porosity of 75–85%. Its elastic modulus (1.3–10 GPa) more closely approximates that of natural cortical (12–18 GPa) and cancellous bone (0.1–0.5 GPa) in comparison with the most commonly used dental materials, such as titanium and titanium alloy (106–115 GPa). Porous tantalum is highly corrosion-resistant and biocompatible. It can significantly enhance the proliferation and differentiation of primary osteoblasts derived from elderly people than titanium. Porous tantalum can allow bone ingrowth and establish not only osseointegration but also osseoincorporation, which will significantly enhance the secondary stability of implants in bone tissue. In this review, we summarize the physicochemical, mechanical and biological properties of porous tantalum. We further discuss the performance of current tantalum dental implants and present the methodologies of surface modifications in order to improve their biological performance

  3. Modifications of the One-More-Than Technique: A Comparison of Two Strategies for Teaching Purchasing Skills to Students with Intellectual Disability in Taiwan

    Science.gov (United States)

    Hsu, Guo-Liang; Tang, Jung-Chang; Hwang, Wu-Yuin; Li, Yung-Chang; Hwang, Wu-Yuin; Li, Yung-Chang; Hung, Jung-Chao; Wei, Chun-Hwa

    2016-01-01

    The demands of money-counting skills potentially limit individuals with intellectual disability (ID) to master the one-more-than technique, particularly in Taiwan, which requires high daily minimum living expense for supporting an individual's daily life. Employing a multiple treatment design across price ranges and settings, this study compared…

  4. Managerial Behaviors of Elementary School Teachers and Student On-Task Behavior.

    Science.gov (United States)

    Goldstein, Jane McCarthy

    The classroom management techniques of elementary school teachers were observed to determine their effectiveness in promoting desirable on-task behavior on the part of pupils. Seven approaches to class management were used as a framework for observation--authoritarian, behavior modification, common sense, group process, instructional emphasis,…

  5. Development of programming techniques for behaviors of nuclear robot in real environment

    International Nuclear Information System (INIS)

    Tsukune, Hideo; Ogasawara, Tsukasa; Hirukawa, Hirohisa; Kitagaki, Kosei; Onda, Hiromu; Nakamura, Akira

    1999-01-01

    This study aims at establishment of synthetic autonomous technique on nuclear robot for a basic technique to realize remote control and automation of works in a nuclear plant by means of development on action programming function under actual environment. Before 1997 fiscal year, development of manipulation description system due to contact state transition series, development of mechanical assembly work instruction system using contact actuating system, development of new manipulator system with excellent controllability, development of quasi contact point monitoring method, and development of environmental model construction method using range finder and instruction tree, had been conducted. In 1997 fiscal year, probability of nuclear robot, on synthetic autonomous technique was shown by synthesis of many results on action programming planning function into a prototype system under an actual environment obtained by those developments. (G.K.)

  6. Effectiveness of Hypnosis in Combination with Conventional Techniques of Behavior Management in Anxiety/Pain Reduction during Dental Anesthetic Infiltration

    Directory of Open Access Journals (Sweden)

    A. Ramírez-Carrasco

    2017-01-01

    Full Text Available Background and Objective. Anxiety/pain are experiences that make dental treatment difficult for children, especially during the time of anesthesia. Hypnosis is used in pediatric clinical situations to modify thinking, behavior, and perception as well as, recently, in dentistry; therefore the aim of this study was to evaluate the effectiveness of hypnosis combined with conventional behavior management techniques during infiltration anesthetic. Methods. Anxiety/pain were assessed with the FLACC scale during the anesthetic moment, as well as heart rate variability and skin conductance before and during the anesthetic moment, between the control and experimental group. Results. A marginal statistical difference (p=0.05 was found in the heart rate between baseline and anesthetic moment, being lower in the hypnosis group. No statistically significant differences were found with the FLACC scale or in the skin conductance (p>0.05. Conclusion. Hypnosis combined with conventional behavior management techniques decreases heart rate during anesthetic infiltration showing that there may be an improvement in anxiety/pain control through hypnotic therapy.

  7. The behavior of moisture content in Durian after harvesting by neutron reflection and transmission techniques

    International Nuclear Information System (INIS)

    Chimoye, T.; Fuangfoong, M.

    1998-01-01

    The study aimed at development of a neutron reflection and transmission technique to determine moisture content in Durian fruit as a function of time after harvesting. A system of a 3 mCi Am-Be neutron source with a BF 3 detector as a neutron probe was developed. The results obtained were validated using weighting method

  8. Attitudes and Acceptability of Behavior Change Techniques to Promote Healthy Food Choices Among Danish Adolescents

    DEFF Research Database (Denmark)

    Nørnberg, Trine; Skov, Laurits Rohden; Houlby, Louise

    2016-01-01

    This study addressed attitudes of using nudging-like measures in community schools to promote healthy food choices among Danish adolescents. Data were successfully collected for 408 respondents. The next step was to prepare descriptive statistics and conduct factor analysis and structural equatio...... it to be acceptable for the school to attempt to intervene with their health-related behavior, but respondents saw it as neither the school's obligation nor responsibility. School-based health promotion could benefit from these findings....

  9. Influence of surface modification on the apatite formation and corrosion behavior of Ti and Ti-15Mo alloy for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sasikumar, Y. [Department of Chemistry, CEG Campus, Anna University, Chennai 600 025 (India); Rajendran, N., E-mail: nrajendran@annauniv.edu [Department of Chemistry, CEG Campus, Anna University, Chennai 600 025 (India)

    2013-02-15

    Commercially pure Ti and Ti-15Mo specimens were subjected to alkali-hydrogen peroxide and subsequent heat treatment to produce a nanoporous titanate gel layer with anatase phase. The surface morphology of the untreated, alkali-hydrogen peroxide treated and alkali-hydrogen peroxide heat treated specimens before and after 7 days of immersion in simulated body fluid was characterized using X-ray Diffractometer (XRD), Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FT-IR). The formation of nanoporous titanate gel layer and the growth of apatite layer over the surface modified specimens after 7 days of immersion in simulated body fluid were confirmed. Further, the electrochemical corrosion behavior of all the specimens was examined using potentiodynamic polarization and electrochemical impedance spectroscopic techniques. - Highlights: ► Simple thermochemical process for Cp-Ti and Ti-15Mo alloy. ► Formation of nanoporous titanate layer on surface facilitate apatite formation. ► Hydroxyapatite coated sample exhibited improved corrosion resistance.

  10. PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: surface modification and in vitro biological evaluation

    International Nuclear Information System (INIS)

    Sultana, Naznin; Wang Min

    2012-01-01

    Tissue engineering combines living cells with biodegradable materials and/or bioactive components. Composite scaffolds containing biodegradable polymers and nanosized osteoconductive bioceramic with suitable properties are promising for bone tissue regeneration. In this paper, based on blending two biodegradable and biocompatible polymers, namely poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(l-lactic acid) (PLLA) with incorporated nano hydroxyapatite (HA), three-dimensional composite scaffolds with controlled microstructures and an interconnected porous structure, together with high porosity, were fabricated using an emulsion freezing/freeze-drying technique. The influence of various parameters involved in the emulsion freezing/freeze-drying technique was studied for the fabrication of good-quality polymer scaffolds based on PHBV polymers. The morphology, mechanical properties and crystallinity of PHBV/PLLA and HA in PHBV/PLLA composite scaffolds and PHBV polymer scaffolds were studied. The scaffolds were coated with collagen in order to improve wettability. During in vitro biological evaluation study, it was observed that SaOS-2 cells had high attachment on collagen-coated scaffolds. Significant improvement in cell proliferation and alkaline phosphatase activity for HA-incorporated composite scaffolds was observed due to the incorporation of HA. After 3 and 7 days of culture on all scaffolds, SaOS-2 cells also had normal morphology and growth. These results indicated that PHBV/PLLA-based scaffolds fabricated via an emulsion freezing/freeze-drying technique were favorable sites for osteoblastic cells and are promising for the applications of bone tissue engineering.

  11. Exploratory study of the effects of wing-leading-edge modifications on the stall/spin behavior of a light general aviation airplane

    Science.gov (United States)

    1979-01-01

    Configurations with full-span and segmented leading-edge flaps and full-span and segmented leading-edge droop were tested. Studies were conducted with wind-tunnel models, with an outdoor radio-controlled model, and with a full-scale airplane. Results show that wing-leading-edge modifications can produce large effects on stall/spin characteristics, particularly on spin resistance. One outboard wing-leading-edge modification tested significantly improved lateral stability at stall, spin resistance, and developed spin characteristics.

  12. Enzymatic modification of starch

    DEFF Research Database (Denmark)

    Jensen, Susanne Langgård

    In the food industry approaches for using bioengineering are investigated as alternatives to conventional chemical and physical starch modification techniques in development of starches with specific properties. Enzyme-assisted post-harvest modification is an interesting approach to this, since...... it is considered a clean and energy saving technology. This thesis aimed to investigate the effect of using reaction conditions, simulating an industrial process, for enzymatic treatment of starch with branching enzyme (BE) from Rhodothermus obamensis. Thus treatements were conducted at 70°C using very high...... substrate concentration (30-40% dry matter (DM)) and high enzyme activity (750-2250 BE units (BEU)/g sample). Starches from various botanical sources, representing a broad range of properties, were used as substrates. The effects of the used conditions on the BE-reaction were evaluated by characterization...

  13. Improving Behavioral Support for Smoking Cessation in Pregnancy: What Are the Barriers to Stopping and Which Behavior Change Techniques Can Influence Them? Application of Theoretical Domains Framework

    Science.gov (United States)

    Coleman-Haynes, Tom; Lorencatto, Fabiana; Ussher, Michael; Dyas, Jane; Coleman, Tim

    2018-01-01

    Behavioral support interventions are used to help pregnant smokers stop; however, of those tested, few are proven effective. Systematic research developing effective pregnancy-specific behavior change techniques (BCTs) is ongoing. This paper reports contributory work identifying potentially-effective BCTs relative to known important barriers and facilitators (B&Fs) to smoking cessation in pregnancy; to detect priority areas for BCTs development. A Nominal Group Technique with cessation experts (n = 12) elicited an expert consensus on B&Fs most influencing women’s smoking cessation and those most modifiable through behavioral support. Effective cessation interventions in randomized trials from a recent Cochrane review were coded into component BCTs using existing taxonomies. B&Fs were categorized using Theoretical Domains Framework (TDF) domains. Matrices, mapping BCT taxonomies against TDF domains, were consulted to investigate the extent to which BCTs in existing interventions target key B&Fs. Experts ranked ‘smoking a social norm’ and ‘quitting not a priority’ as most important barriers and ‘desire to protect baby’ an important facilitator to quitting. From 14 trials, 23 potentially-effective BCTs were identified (e.g., ‘information about consequences). Most B&Fs fell into ‘Social Influences’, ‘Knowledge’, ‘Emotions’ and ‘Intentions’ TDF domains; few potentially-effective BCTs mapped onto every TDF domain. B&Fs identified by experts as important to cessation, are not sufficiently targeted by BCT’s currently within interventions for smoking cessation in pregnancy. PMID:29462994

  14. Theory and practical understanding of the migration behavior of proteins and peptides in CE and related techniques.

    Science.gov (United States)

    Freitag, Ruth; Hilbrig, Frank

    2007-07-01

    CEC is defined as an analytical method, where the analytes are separated on a chromatographic column in the presence of an applied voltage. The separation of charged analytes in CEC is complex, since chromatographic interaction, electroosmosis and electrophoresis contribute to the experimentally observed behavior. The putative contribution of effects such as surface electrodiffusion has been suggested. A sound theoretical treatment incorporating all effects is currently not available. The question of whether the different effects contribute in an independent or an interdependent manner is still under discussion. In this contribution, the state-of-the-art in the theoretical description of the individual contributions as well as models for the retention behavior and in particular possible dimensionless 'retention factors' is discussed, together with the experimental database for the separation of charged analytes, in particular proteins and peptides, by CEC and related techniques.

  15. Evaluation of convergence behavior of metamodeling techniques for bridging scales in multi-scale multimaterial simulation

    International Nuclear Information System (INIS)

    Sen, Oishik; Davis, Sean; Jacobs, Gustaaf; Udaykumar, H.S.

    2015-01-01

    The effectiveness of several metamodeling techniques, viz. the Polynomial Stochastic Collocation method, Adaptive Stochastic Collocation method, a Radial Basis Function Neural Network, a Kriging Method and a Dynamic Kriging Method is evaluated. This is done with the express purpose of using metamodels to bridge scales between micro- and macro-scale models in a multi-scale multimaterial simulation. The rate of convergence of the error when used to reconstruct hypersurfaces of known functions is studied. For sufficiently large number of training points, Stochastic Collocation methods generally converge faster than the other metamodeling techniques, while the DKG method converges faster when the number of input points is less than 100 in a two-dimensional parameter space. Because the input points correspond to computationally expensive micro/meso-scale computations, the DKG is favored for bridging scales in a multi-scale solver

  16. Comparison of Clustering Techniques for Residential Energy Behavior using Smart Meter Data

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Ling; Lee, Doris; Sim, Alex; Borgeson, Sam; Wu, Kesheng; Spurlock, C. Anna; Todd, Annika

    2017-03-21

    Current practice in whole time series clustering of residential meter data focuses on aggregated or subsampled load data at the customer level, which ignores day-to-day differences within customers. This information is critical to determine each customer’s suitability to various demand side management strategies that support intelligent power grids and smart energy management. Clustering daily load shapes provides fine-grained information on customer attributes and sources of variation for subsequent models and customer segmentation. In this paper, we apply 11 clustering methods to daily residential meter data. We evaluate their parameter settings and suitability based on 6 generic performance metrics and post-checking of resulting clusters. Finally, we recommend suitable techniques and parameters based on the goal of discovering diverse daily load patterns among residential customers. To the authors’ knowledge, this paper is the first robust comparative review of clustering techniques applied to daily residential load shape time series in the power systems’ literature.

  17. Black oil hydrate behavior : a comparison study of testing techniques : SINTEF Wheel and Multicell

    Energy Technology Data Exchange (ETDEWEB)

    Lund, A.; Hjarbo, K.W. [SINTEF Material and Chemistry, Trondheim (Norway); Larsen, R.; Straume, E.O.; Hoiland, S. [SINTEF Petroleum Research, Trondheim (Norway); Bracey, J.T. [BHP Billiton, Houston, TX (United States)

    2008-07-01

    SINTEF has developed a high pressure Multicell system to quickly screen possible inhibitor candidates for black oil systems in high pressure cells and loops. The hydrate self inhibiting properties of a black oil system were evaluated for gas/water and gas/water/oil systems at different water cuts. The oil system was then retested in a fluid flow loop system (Wheel). Different low dosage hydrate inhibitors (LDHI) were then screened in the Multicell system. The most promising inhibitors were tested further in the Wheel system. This paper presented the experimental results of these tests. The Multicell screening method allows 48 parallel low-volume samples to be compared simultaneously. The Wheel is suitable for more thorough testing of large-volume samples at harsh experimental conditions. Black oil samples were tested in this study using both techniques. Experiments were conducted to simulate shut-in and restart situations in a production line at field conditions. Both uninhibited oil and LDHI additives were tested. The Multicell was used to identify the critical water cut limit for uninhibited oil, and for screening the performance of the inhibitor for a large number of LDHIs at relevant conditions. The results from both testing techniques were found to be in good agreement. Both identified the same critical water cut limit. The Multicell technique was shown to be valuable for fast screening, testing and optimization of experimental conditions. However, the Wheel is needed for testing relevant flow behaviour of the systems. 1 ref., 4 tabs., 5 figs.

  18. Structured behavioral observation techniques as components of an effective fitness-for-duty program

    International Nuclear Information System (INIS)

    Hauth, J.T.; Barnes, V.E.; Moore, C.J.; Toquam, J.L.

    1989-01-01

    Performance-based tests are designed to evaluate physical and cognitive performance and have several attractive features that may be useful in nuclear power plant fitness-for-duty programs. Three types of performance-based testing that may eventually be useful in the nuclear power industry are reviewed in this paper: (a) the Los Angeles Police Department's Drug Recognition Expert program, (b) performance assessment batteries, and (c) performance assessment devices. Each of these techniques is evaluated here in terms of the following measures of effectiveness: (1) scope, or the range of potential problems that can be detected; (2) reliability, or the consistency of results; (3) sensitivity, or the ability of the test to detect impairment or the presence of drugs at low levels; (4) specificity, or the ability of the test to correctly identify the source of impairment or the drug present; (5) implementation, or the practicality of using the technique in the nuclear power plant setting. This information analyzed in this paper indicates that although performance and cognitive assessment techniques currently lack the reliability, sensitivity, and specificity of random chemical screening to detect and deter substance abuse, they can address a variety of fitness-for-duty concerns that may not be adequately addressed by a urinalysis testing program alone. These include detection of drug use not detected by urinalysis, psychological stress, or physical injury or illness

  19. Effects of various polishing media and techniques on the surface finish and behavior of laser glasses

    International Nuclear Information System (INIS)

    Landingham, R.L.; Casey, A.W.; Lindahl, R.O.

    1978-01-01

    The advance of high-power laser technology is dependent on the rate of advancement in laser glass forming and surface preparation. The threshold damage of glass surfaces continues to be a weak link in the overall advancement of laser technology. Methods were developed and used in the evaluation of existing glass surface preparation techniques. Modified procedures were evaluated to reduce surface contamination and subsurface defects. Polishing rates were monitored under controlled polishing conditions (purity, pH, particle size distribution, particle concentration, etc.). Future work at LLL for this ongoing investigation is described

  20. [Calcaneo-fibular ligament surgery for chronic lateral instability of the upper ankle : Broström technique with modification by Wille. Video article].

    Science.gov (United States)

    Kosiol, J; Wille, M; Putzer, D; Biedermann, R

    2015-11-01

    An acute ligament rupture of the lateral ligament complex of the ankle joint is treated without surgery. Treatment failure may lead to a chronically unstable situation of the ankle joint, in which case surgery is an effective procedure for stabilizing the ruptured ligaments. Anatomical reconstruction is the best operative technique if the ligament tissue is of good quality. In our video we demonstrate a new possibility for the positioning of an anchor to tighten the calcaneo-fibular ligament. Modified Broström repairs are described in the literature in which the calcaneo-fibular ligament is released and reattached to the fibula to tighten it. We present the option to release the ligament at the calcaneus and reattach it using a suture anchor. This offers the advantage of preventing the possible dislocation of the peroneal tendons.

  1. Reações de imunofluorescência indireta: algumas modificações de sua técnica Indirect immunofluorescence tests: some modifications of their technique

    Directory of Open Access Journals (Sweden)

    Cláudio Santos Ferreira

    1973-09-01

    Full Text Available Propõem-se modificações de procedimentos rotineiros de reações de imunofluorescência indireta. A eluição das amostras de sangue dessecado contidas em papel-filtro é feita em placas ("godets" com tampas. Alças de níquel-cromo substituem pipetas capilares para a transferência de amostras de eluatos para as lâminas de microscopia. Propõe-se uma técnica rápida e eficiente de lavagem das preparações.Some simplifications intended for routine operations included immunofluorescence tests are proposed. The elution of dried blood samples is performed on test plates (water-color mixing plates, with a lid instead of in test tubes. Nickel-chromium wire loops are substituted for capillary pipettes in transferring eluate samples to microscope slides. A rapid and efficient washing technique is proposed.

  2. Investigating the social behavioral dynamics and differentiation of skill in a martial arts technique.

    Science.gov (United States)

    Caron, Robert R; Coey, Charles A; Dhaim, Ashley N; Schmidt, R C

    2017-08-01

    Coordinating interpersonal motor activity is crucial in martial arts, where managing spatiotemporal parameters is emphasized to produce effective techniques. Modeling arm movements in an Aikido technique as coupled oscillators, we investigated whether more-skilled participants would adapt to the perturbation of weighted arms in different and predictable ways compared to less-skilled participants. Thirty-four participants ranging from complete novice to veterans of more than twenty years were asked to perform an Aikido exercise with a repeated attack and response, resulting in a period of steady-state coordination, followed by a take down. We used mean relative phase and its variability to measure the steady-state dynamics of both the inter- and intrapersonal coordination. Our findings suggest that interpersonal coordination of less-skilled participants is disrupted in highly predictable ways based on oscillatory dynamics; however, more-skilled participants overcome these natural dynamics to maintain critical performance variables. Interestingly, the more-skilled participants exhibited more variability in their intrapersonal dynamics while meeting these interpersonal demands. This work lends insight to the development of skill in competitive social motor activities. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Sustaining a “culture of silence” in the neonatal intensive care unit during nonemergency situations: A grounded theory on ensuring adherence to behavioral modification to reduce noise levels

    Directory of Open Access Journals (Sweden)

    S. Swathi

    2014-03-01

    Full Text Available The aim of this study was to generate a substantive theory explaining how the staff in a resource-limited neonatal intensive care unit (NICU of a developing nation manage to ensure adherence to behavioral modification components of a noise reduction protocol (NsRP during nonemergency situations. The study was conducted after implementation of an NsRP in a level III NICU of south India. The normal routine of the NICU is highly dynamic because of various categories of staff conducting clinical rounds followed by care-giving activities. This is unpredictably interspersed with very noisy emergency management of neonates who suddenly fall sick. In-depth interviews were conducted with 36 staff members of the NICU (20 staff nurses, six nursing aides, and 10 physicians. Group discussions were conducted with 20 staff nurses and six nursing aides. Data analysis was done in line with the reformulated grounded theory approach, which was based on inductive examination of textual information. The results of the analysis showed that the main concern was to ensure adherence to behavioral modification components of the NsRP. This was addressed by using strategies to “sustain a culture of silence in NICU during nonemergency situations” (core category. The main strategies employed were building awareness momentum, causing awareness percolation, developing a sense of ownership, expansion of caring practices, evolution of adherence, and displaying performance indicators. The “culture of silence” reconditions the existing staff and conditions new staff members joining the NICU. During emergency situations, a “noisy culture” prevailed because of pragmatic neglect of behavioral modification when life support overrode all other concerns. In addition to this, the process of operant conditioning should be formally conducted once every 18 months. The results of this study may be adapted to create similar strategies and establish context specific NsRPs in NICUs

  4. Nano-deformation behavior of silicon (100) film studied by depth sensing indentation and nanoscratch technique

    Science.gov (United States)

    Geetha, D.; Pratyank, R.; Kiran, P.

    2018-04-01

    Silicon being the most important material applied in microelectronic and photovoltaic technology, repeated investigation of the mechanical properties becomes essential. The nanoscale elastic-plastic deformation characteristics of Si (100) film were analyzed using nanoindentation and nanoscratch techniques. The hardness and elastic modulus values of the film obtained from nanoindentation tests were found to be consistent with the reported values. The load-displacement curves showed discontinuities and kinks which confirms the plastic behaviour of Si. The indentation induced plastic deformations were the consequences of the phase transformations. The critical shear stress, tensile strength and plastic zone size, of the Si film when subjected to nanoindentation were determined. The nanoscratch tests were performed to understand the tribological properties of the film. The SPM images of both the nanoindentation and nanoscratch profiles were useful in revealing the plastic character in terms of the piling up of matter in the vicinity of the dents. Conclusions were drawn in quantifying the plastic deformations and phase transformations.

  5. A novel technique for prevention of self-mutilation in three Harris' hawks (Parabuteo unicinctus).

    Science.gov (United States)

    Smith, Stephen P; Forbes, Neil A

    2009-03-01

    Feather destructive behavior is an ever-increasing problem in captive birds of prey and any associated self-mutilation can be challenging to manage. This clinical report describes a noninvasive, nonpainful, temporary beak modification technique used to prevent self-mutilation in 3 Harris' hawks (Parabuteo unicinctus), when other methods and husbandry modifications had failed. The technique was successful in all 3 birds, and no adverse effects were observed. Further investigations are required to further evaluate if this beak modification technique causes any psychologic or physical stress to the avian patient.

  6. Analyzing wind turbine directional behavior: SCADA data mining techniques for efficiency and power assessment

    International Nuclear Information System (INIS)

    Castellani, Francesco; Astolfi, Davide; Sdringola, Paolo; Proietti, Stefania; Terzi, Ludovico

    2017-01-01

    Highlights: • The directional behavior of four turbines of an onshore wind farm is investigated. • The positions of the nacelles are discretized to highlight clusterization effects. • The recurrent alignment patterns of the cluster are individuated and analyzed. • The patterns are studied by the point of view of efficiency and power output. • Significative performance deviations arise among the most frequent configurations. - Abstract: SCADA control systems are the keystone for reliable performance optimization of wind farms. Processing into knowledge the amount of information they spread is a challenging task, involving engineering, physics, statistics and computer science skills. This work deals with SCADA data analysis methods for assessing the importance of how wind turbines align in patterns to the wind direction. In particular it deals with the most common collective phenomenon causing clusters of turbines behaving as a whole, rather than as a collection of individuality: wake effects. The approach is based on the discretization of nacelle position measurements and subsequent post-processing through simple statistical methods. A cluster, severely affected by wakes, from an onshore wind farm, is selected as test case. The dominant alignment patterns of the cluster are identified and analyzed by the point of view of power output and efficiency. It is shown that non-trivial alignments with respect to the wind direction arise and important performance deviations occur among the most frequent configurations.

  7. The behavior of implant-supported dentures and abutments using the cemented cylinder technique with different resinous cements

    Directory of Open Access Journals (Sweden)

    Ivete Aparecida de Mathias Sartori

    2008-01-01

    Full Text Available Objective: Evaluate the behavior of implant-supported dentures and their components, made by cemented cylinder technique, using threetypes of resin cements. Methods: Fifty three patients, of whom 26 were women and 27 men, aged between 25 and 82 years. Results: With partial (54.43% and total (45.57% implant-supported dentures, of the Cone Morse, external and internal hexagon types (Neodent®, Curitiba, Brazil, totaling 237 fixations, were analyzed. The resin cements used were Panavia® (21.94%, EnForce® (58.23% and Rely X® (19.83% and the components were used in accordance with the Laboratory Immediate Loading - Neodent® sequence. The period of time of denture use ranged between 1 and 5 years. The results reported that 5(2.1% cylinders were loosened from metal structure (both belonging to Rely X group, 2(0.48% implants were lost after the first year of use, 16(6.75% denture retention screws wereloosened and 31(13.08% abutment screws were unloosened.Conclusion: The reasons for these failures probably are: metal structure internal retention failure, occlusal pattern, cementation technique and loading conditions. The cemented cylinder technique was effective when used in partial and total implant-supported rehabilitations, keeping prosthetic components stable, despite the resin cement utilized. However, further clinical studies must be conducted.

  8. Communication-related behavior change techniques used in face-to-face lifestyle interventions in primary care: A systematic review of the literature

    NARCIS (Netherlands)

    Noordman, J.; Weijden, T.T. van der; Dulmen, A.M. van

    2012-01-01

    OBJECTIVES: To systematically review the literature on the relative effectiveness of face-to-face communication-related behavior change techniques (BCTs) provided in primary care by either physicians or nurses to intervene on patients' lifestyle behavior. METHODS: PubMed, EMBASE, PsychINFO, CINAHL

  9. Communication-related behavior change techniques used in face-to-face lifestyle interventions in primary care: a systematic review of the literature.

    NARCIS (Netherlands)

    Noordman, J.; Weijden, T. van der; Dulmen, S. van

    2012-01-01

    Objectives: To systematically review the literature on the relative effectiveness of face-to-face communication-related behavior change techniques (BCTs) provided in primary care by either physicians or nurses to intervene on patients’ lifestyle behavior. Methods: PubMed, EMBASE, PsychINFO, CINAHL

  10. Studies of the corrosion and cracking behavior of steels in high temperature water by electrochemical techniques

    International Nuclear Information System (INIS)

    Cheng, Y.F.; Bullerwell, J.; Steward, F.R.

    2003-01-01

    Electrochemical methods were used to study the corrosion and cracking behavior of five Fe-Cr alloy steels and 304L stainless steel in high temperature water. A layer of magnetite film forms on the metal surface, which decreases the corrosion rate in high temperature water. Passivity can be achieved on A-106 B carbon steel with a small content of chromium, which cannot be passivated at room temperature. The formation rate and the stability of the passive film (magnetite film) increased with increasing Cr-content in the steels. A mechanistic model was developed to simulate the corrosion and cracking processes of steels in high temperature water. The crack growth rate on steels was calculated from the maximum current of the repassivation current curves according to the slip-oxidation model. The highest crack growth rate was found for 304L stainless steel in high temperature water. Of the four Fe-Cr alloys, the crack growth rate was lower on 0.236% Cr- and 0.33% Cr-steels than on 0.406% Cr-steel and 2.5% Cr-1% Mo steel. The crack growth rate on 0.33% Cr-steel was the smallest over the tested potential range. A higher temperature of the electrolyte led to a higher rate of electrochemical dissolution of steel and a higher susceptibility of steel to cracking, as shown by the positive increase of the electrochemical potential. An increase in Cr-content in the steel is predicted to reduce the corrosion rate of steel at high temperatures. However, this increase in Cr-content is predicted not to reduce the susceptibility of steel to cracking at high temperatures. (author)

  11. Radiotracer technique to study pollutant behavior in the vadose zone for groundwater protection

    International Nuclear Information System (INIS)

    Kulkarni, U.P.; Sinha, U.K.; Navada, S.V.; Datta, P.S.; Sud, Y.K.; Kulkarni, K.M.; Aggrawal, P.; )

    2004-01-01

    Pollutants are generated either by industrial or agricultural activity. Pollutants produced due to industrial activities fall into point source category and those generated from agricultural are grouped into extended source category. Under an International Atomic Energy Agency/Coordinated Research Program study, emphasis has been given on transport of pollutants, generated from agricultural activities, in particular, due to the application of fertilizer inputs to a variety of crops. Pollutants take entry through the vadose zone and ultimately join the saturated zone. Once groundwater is polluted it is rather difficult or impossible to take remedial measures for groundwater protection. Groundwater being an important natural resource, it is important to protect it from getting polluted. It is hence essential to have a clear understanding of the complex processes (physical, biological and chemical etc.) undergoing in the unsaturated zone. Radiotracers give good insight about the pollutant behavior in the vadose zone. Tritiated water and 60 Co (a gamma emitting tracer in the cyanide complex form) were used as tracers and were injected at 60 cm depth in the vadose zone of IARI farm for pollutant transport study. Tritium and 60 Co tracer displacements were measured by liquid scintillation and sodium iodide scintillation method respectively. It was found that the tritium tracer moved up to 2.4 meters in six months and part of the tritium tracer was exchanged with immobile water in the soil, as three distinct peaks were observed in tritium profile. 60 Co and tritium tracers were found to move with the same velocity in the vadose zone. These tracer studies indicate that the pollutants may reach the groundwater in about three years. (author)

  12. Application of Behavior Change Techniques in a Personalized Nutrition Electronic Health Intervention Study: Protocol for the Web-Based Food4Me Randomized Controlled Trial

    NARCIS (Netherlands)

    Macready, Anna L.; Fallaize, Rosalind; Butler, Laurie T.; Ellis, Judi A.; Kuznesof, Sharron; Frewer, Lynn J.; Celis-Morales, Carlos; Livingstone, Katherine M.; Araújo-Soares, Vera; Fischer, Arnout R.H.; Stewart-Knox, Barbara J.; Mathers, John C.; Lovegrove, Julie A.

    2018-01-01

    Background: To determine the efficacy of behavior change techniques applied in dietary and physical activity intervention studies, it is first necessary to record and describe techniques that have been used during such interventions. Published frameworks used in dietary and smoking cessation

  13. Aportes y modificaciones de técnicas quirúrgicas en cirugía craneofacial pediátrica Contributions and modifications of surgical techniques in pediatric craniofacial surgery

    Directory of Open Access Journals (Sweden)

    Dadonim Vila Morales

    2010-09-01

    craniofacial techniques, a cross-sectional and descriptive study was conducted in 46 patients seen by the craniofacial surgery multidisciplinary staff from "Juán Manuel Máquez" University Children Hospital from May, 2003 to March, 2007. Mean age of the patients operated on was of 6.3 years. Twenty Surgical tehniques were performed where the more used was he coronal suturectomy with a mask hemi-advance and frontal cranioplasty for the 15.2 %, followed by the coronal suturectomy with the two above techniques for te 10.9 %. The 8.9 % of patients need LeFort III osteotomy for distraction of half-third. The contributions included: radiate plication of dura mater with the bipolar type in the 75.0 % of craniotomy patients, punctiform incision of dura mater to decompress a transoperative encephalic hypertension or to retract the encephalon for osteotomies on skull base in the 64.3 % of craniotomy patients, greenstick fracture at level of pterion in the mask flap for the Marshal's techniques used in the 83.3 % of the brachycephalous or plagiocephaly with advance only of inolved side in the 100 % of plagiocephalies with a modification of Marshall's technique among others, for a total o 9 modifications to surgical procedures. There weren't complications associated with these procedures and more than two years of posoperative course.

  14. Dismantling techniques

    International Nuclear Information System (INIS)

    Wiese, E.

    1998-01-01

    Most of the dismantling techniques used in a Decontamination and Dismantlement (D and D) project are taken from conventional demolition practices. Some modifications to the techniques are made to limit exposure to the workers or to lessen the spread of contamination to the work area. When working on a D and D project, it is best to keep the dismantling techniques and tools as simple as possible. The workers will be more efficient and safer using techniques that are familiar to them. Prior experience with the technique or use of mock-ups is the best way to keep workers safe and to keep the project on schedule

  15. Dismantling techniques

    Energy Technology Data Exchange (ETDEWEB)

    Wiese, E.

    1998-03-13

    Most of the dismantling techniques used in a Decontamination and Dismantlement (D and D) project are taken from conventional demolition practices. Some modifications to the techniques are made to limit exposure to the workers or to lessen the spread of contamination to the work area. When working on a D and D project, it is best to keep the dismantling techniques and tools as simple as possible. The workers will be more efficient and safer using techniques that are familiar to them. Prior experience with the technique or use of mock-ups is the best way to keep workers safe and to keep the project on schedule.

  16. The Use of Behavior Change Techniques and Theory in Technologies for Cardiovascular Disease Prevention and Treatment in Adults: A Comprehensive Review.

    Science.gov (United States)

    Winter, Sandra J; Sheats, Jylana L; King, Abby C

    2016-01-01

    This review examined the use of health behavior change techniques and theory in technology-enabled interventions targeting risk factors and indicators for cardiovascular disease (CVD) prevention and treatment. Articles targeting physical activity, weight loss, smoking cessation and management of hypertension, lipids and blood glucose were sourced from PubMed (November 2010-2015) and coded for use of 1) technology, 2) health behavior change techniques (using the CALO-RE taxonomy), and 3) health behavior theories. Of the 984 articles reviewed, 304 were relevant (240=intervention, 64=review). Twenty-two different technologies were used (M=1.45, SD=+/-0.719). The most frequently used behavior change techniques were self-monitoring and feedback on performance (M=5.4, SD=+/-2.9). Half (52%) of the intervention studies named a theory/model - most frequently Social Cognitive Theory, the Trans-theoretical Model, and the Theory of Planned Behavior/Reasoned Action. To optimize technology-enabled interventions targeting CVD risk factors, integrated behavior change theories that incorporate a variety of evidence-based health behavior change techniques are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Cognitive behavioral therapy in practice: therapist perceptions of techniques, outcome measures, practitioner qualifications, and relation to research.

    Science.gov (United States)

    Bohman, Benjamin; Santi, Alberto; Andersson, Gerhard

    2017-09-01

    Cognitive behavioral therapy (CBT) has a strong evidence base for several psychiatric disorders, however, it may be argued that currently there is no overall agreement on what counts as 'CBT'. One reason is that CBT is commonly perceived as encompassing a broad range of treatments, from purely cognitive to purely behavioral, making it difficult to arrive at a clear definition. The purpose of the present study was to explore practicing therapists' perceptions of CBT. Three hundred fifty members of two multi-disciplinary interest groups for CBT in Sweden participated. Mean age was 46 years, 68% were females, 63% psychologists and mean number of years of professional experience was 12 years. Participants completed a web-based survey including items covering various aspects of CBT practice. Overall, therapist perceptions of the extent to which different treatment techniques and procedures were consistent with CBT were in line with current evidence-based CBT protocols and practice guidelines, as were therapists' application of the techniques and procedures in their own practice. A majority of participants (78%) agreed that quality of life or level of functioning were the most important outcome measures for evaluating treatment success. Eighty percent of therapists believed that training in CBT at a basic level was a requirement for practicing CBT. There was a medium size Spearman correlation of r s= .46 between the perceived importance of research to practice and the extent to which participants kept themselves updated on research. Implications for training, quality assurance, and the effectiveness of CBT in clinical practice are discussed.

  18. Characterization technique for inhomogeneous 4H-SiC Schottky contacts: A practical model for high temperature behavior

    Science.gov (United States)

    Brezeanu, G.; Pristavu, G.; Draghici, F.; Badila, M.; Pascu, R.

    2017-08-01

    In this paper, a characterization technique for 4H-SiC Schottky diodes with varying levels of metal-semiconductor contact inhomogeneity is proposed. A macro-model, suitable for high-temperature evaluation of SiC Schottky contacts, with discrete barrier height non-uniformity, is introduced in order to determine the temperature interval and bias domain where electrical behavior of the devices can be described by the thermionic emission theory (has a quasi-ideal performance). A minimal set of parameters, the effective barrier height and peff, the non-uniformity factor, is associated. Model-extracted parameters are discussed in comparison with literature-reported results based on existing inhomogeneity approaches, in terms of complexity and physical relevance. Special consideration was given to models based on a Gaussian distribution of barrier heights on the contact surface. The proposed methodology is validated by electrical characterization of nickel silicide Schottky contacts on silicon carbide (4H-SiC), where a discrete barrier distribution can be considered. The same method is applied to inhomogeneous Pt/4H-SiC contacts. The forward characteristics measured at different temperatures are accurately reproduced using this inhomogeneous barrier model. A quasi-ideal behavior is identified for intervals spanning 200 °C for all measured Schottky samples, with Ni and Pt contact metals. A predictable exponential current-voltage variation over at least 2 orders of magnitude is also proven, with a stable barrier height and effective area for temperatures up to 400 °C. This application-oriented characterization technique is confirmed by using model parameters to fit a SiC-Schottky high temperature sensor's response.

  19. Investigating the sorption behavior of cadmium from aqueous solution by potassium permanganate-modified biochar: quantify mechanism and evaluate the modification method.

    Science.gov (United States)

    Fan, Zixi; Zhang, Qian; Li, Meng; Niu, Dongyuan; Sang, Wenjiao; Verpoort, Francis

    2018-03-01

    In this work, a KMnO 4 -modified-biochar-based composite material with manganese oxide produced at 600 °C was fabricated to investigate the sorption mechanism of Cd(II) and to comprehensively evaluate the effect of the modification on biochar properties. Cd(II) adsorption mechanisms were mainly controlled by interaction with minerals, complexation with oxygen-containing functional groups, and cation-π interaction. The sorption capacity was significantly reduced after a deash treatment of biochar, almost shrunk by 3 and 3.5 times for pristine biochar (PBC) and modified biochar (MBC). For deashed PBC, oxygen-containing functional groups were the main contributor toward Cd(II) adsorption while interaction with minerals was significantly compromised and became negligible. The sorption capacity was also apparently decreased after the deash treatment of MBC; however, for deashed MBC, interaction with minerals still was the main contributor to the sorption ability, which could be attributed to the mechanism of interaction of Cd(II) with loaded MnO x on biochar. Cation-π interaction in MBC was notably enhanced compared to PBC due to the oxidation of KMnO 4 on biomass. Also, sorption performance by oxygen-containing functional groups was also enhanced. Hence, the modification by KMnO 4 has a significant effect on the Cd(II) sorption performance of biochar.

  20. Can a new behaviorally oriented training process to improve lifting technique prevent occupationally related back injuries due to lifting?

    Science.gov (United States)

    Lavender, Steven A; Lorenz, Eric P; Andersson, Gunnar B J

    2007-02-15

    A prospective randomized control trial. To determine the degree to which a new behavior-based lift training program (LiftTrainer; Ascension Technology, Burlington, VT) could reduce the incidence of low back disorder in distribution center jobs that require repetitive lifting. Most studies show programs aimed at training lifting techniques to be ineffective in preventing low back disorders, which may be due to their conceptual rather than behavioral learning approach. A total of 2144 employees in 19 distribution centers were randomized into either the LiftTrainer program or a video control group. In the LiftTrainer program, participants were individually trained in up to 5, 30-minute sessions while instrumented with motion capture sensors to quantify the L5/S1 moments. Twelve months following the initial training, injury data were obtained from company records. Survival analyses (Kaplan-Meier) indicated that there was no difference in injury rates between the 2 training groups. Likewise, there was no difference in the turnover rates. However, those with a low (<30 Nm) average twisting moment at the end of the first session experienced a significantly (P < 0.005) lower rate of low back disorder than controls. While overall the LiftTrainer program was not effective, those with twisting moments below 30 Nm reported fewer injuries, suggesting a shift in focus for "safe" lifting programs.

  1. In-Situ Catalytic Surface Modification of Micro-Structured La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF Oxygen Permeable Membrane Using Vacuum-Assisted technique

    Directory of Open Access Journals (Sweden)

    Othman Nur Hidayati

    2016-01-01

    Full Text Available This paper aims at investigating the means to carry out in-situ surface modification of La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF oxygen permeable membrane by using vacuum assisted technique. The unique structure of the LSCF hollow fibre membrane used in this study, which consists of an outer dense oxygen separation layer and conical-shaped microchannels open at the inner surface has allowed the membrane to be used as oxygen separation membrane and as a structured substrate for where catalyst can be deposited. A catalyst solution of similar material, LSCF was prepared using sol-gel technique. Effects of calcination temperature and heating rate were investigated using XRD and TGA to ensure pure perovskites structure of LSCF was obtained. It was found that a lower calcination temperature can be used to obtain pure perovskite phase if slower heating rate is used. The SEM photograph shows that the distribution of catalyst onto the membrane microchannels using in-situ deposition technique was strongly related to the viscosity of LSCF catalytic sol. Interestingly, it was found that the amount of catalyst deposited using viscous solution was slightly higher than the less viscous sol. This might be due to the difficulty of catalyst sol to infiltrate the membrane and as a result, thicker catalyst layer was observed at the lumen rather than onto the conical-shaped microchannels. Therefore, the viscosity of catalyst solution and calcination process should be precisely controlled to ensure homogeneous catalyst layer deposition. Analysis of the elemental composition will be studied in the future using energy dispersive X-ray Spectroscopy (EDX to determine the elements deposited onto the membranes. Once the elemental analysis is confirmed, oxygen permeation analysis will be carried out.

  2. Wear behavior of the surface alloyed AISI 1020 steel with Fe-Nb-B by TIG welding technique

    Energy Technology Data Exchange (ETDEWEB)

    Kilinc, B., E-mail: bkilinc@sakarya.edu.tr; Durmaz, M.; Abakay, E. [Department of Metallurgical and Materials Engineering, Institute of Arts and Sciences, SakaryaUniversity, Esentepe Campus, 54187Sakarya (Turkey); Sen, U.; Sen, S. [Department of Metallurgical and Materials Engineering, Engineering Faculty, Sakarya University, Esentepe Campus, 54187 Sakarya (Turkey)

    2015-03-30

    Weld overlay coatings also known as hardfacing is a method which involves melting of the alloys and solidification for applied coatings. Recently hardfacing by welding has become a commonly used technique for improvement of material performance in extreme (high temperature, impact/abrasion, erosion, etc.) conditions.In the present study, the coatings were produced from a mixture of ferrous niobium, ferrous boron and iron powders in the ranges of -45µm particle size with different ratio. Fe{sub 12}Nb{sub 5}B{sub 3} and Fe{sub 2}NbBalloys were coated on the AISI 1020 steel surface by TIG welding. The phases formed in the coated layer are Fe{sub 2}B, NbB{sub 2}, NbFeB and Fe0,2 Nb{sub 0,8} phases. The hardness of the presence phases are changing between 1689±85 HV{sub 0.01}, and 181±7 HV{sub 0.1}. Microstructural examinations were realized by optical and scanning electron microscopy. The wear and friction behaviors of Fe{sub 12}Nb{sub 5}B{sub 3} and Fe2NbB realized on the AISI 1020 steel were investigated by the technique of TIG welding by using ball-on-disk arrangement against alumina ball.

  3. Wear behavior of the surface alloyed AISI 1020 steel with Fe-Nb-B by TIG welding technique

    Science.gov (United States)

    Kilinc, B.; Durmaz, M.; Abakay, E.; Sen, U.; Sen, S.

    2015-03-01

    Weld overlay coatings also known as hardfacing is a method which involves melting of the alloys and solidification for applied coatings. Recently hardfacing by welding has become a commonly used technique for improvement of material performance in extreme (high temperature, impact/abrasion, erosion, etc.) conditions.In the present study, the coatings were produced from a mixture of ferrous niobium, ferrous boron and iron powders in the ranges of -45µm particle size with different ratio. Fe12Nb5B3 and Fe2NbBalloys were coated on the AISI 1020 steel surface by TIG welding. The phases formed in the coated layer are Fe2B, NbB2, NbFeB and Fe0,2 Nb0,8 phases. The hardness of the presence phases are changing between 1689±85 HV0.01, and 181±7 HV0.1. Microstructural examinations were realized by optical and scanning electron microscopy. The wear and friction behaviors of Fe12Nb5B3 and Fe2NbB realized on the AISI 1020 steel were investigated by the technique of TIG welding by using ball-on-disk arrangement against alumina ball.

  4. The Acquisition of Standard English Speech Habits Using Second-Language Techniques: An Experiment in Speech Modification and Generalization in the Verbal Behavior of Prison Inmates.

    Science.gov (United States)

    McKee, John M.; And Others

    Many people take for granted the use of language as a tool for coping with everyday occupational and social problems. However, there are those, such as prison inmates, who have difficulty using language in this manner. Realizing that prison inmates are not always able to communicate effectively through standard patterns of speech and thus are…

  5. Tribological effects of polymer surface modification through plastic

    Indian Academy of Sciences (India)

    Tribological effects of polymer surface modification through plastic deformation. K O Low K J Wong ... In this regard, a surface modification technique through plastic deformation has been implemented. ... Bulletin of Materials Science | News.

  6. Long-term outcome after the original and simple modified technique of valve-sparing aortic root reimplantation in Marfan-based population, David V University of Tokyo modification.

    Science.gov (United States)

    Ando, Masahiko; Yamauchi, Haruo; Morota, Tetsuro; Taketani, Tsuyoshi; Shimada, Shogo; Nawata, Kan; Umeki, Akihide; Ono, Minoru

    2016-01-01

    In valve-sparing aortic root replacement (VSARR), how to reproduce Valsalva sinus has been an issue. In the original David V procedure, they put plication stitches at sinotubular junction level, although the reefing effect is limited and distal graft remains larger than native. Other modified techniques are two-grafts technique and ready-made Valsalva graft. However, the former needs graft-graft anastomosis and may not be cost-effective, while in the latter, the shape of sinus is fixed and minor adjustment is difficult. David V University of Tokyo modification (David V-UT) is our original solution to that, creating pseudosinus with one straight graft by longitudinal size-reduction running sutures above each pseudosinus. The purpose of the present study is to investigate long-term outcome of David V-UT. We analyzed 59 David V-UT patients from February 2004 to February 2013 and long-term outcomes were investigated by Kaplan-Meier methods. Risk factors for adverse events "death or recurrent aortic insufficiency (AI) with or without aortic valve reoperation" were analyzed by using Cox proportional hazard models. Mean age was 33.1±14.5 years, and 38 patients (64%) were male. Marfan syndrome (MFS) accounts for 47 patients (80%). Only one patient was with bicuspid aortic valve. No in-hospital mortality was observed. Mean follow-up was 4.9±2.4 years. Estimated survival was 94.0±3.4% at 5 years. Freedoms from aortic valve reoperation and recurrent AI greater than mild were 95.7±3.0% and 88.9±4.7% at 5 years, respectively. In Cox proportional hazard analysis, preoperative AI greater than mild and Z score of annular diameter were significant risks for adverse events (p=0.027 and 0.045, hazard ratio 6.084 and 1.432, 95% C.I. 1.225-30.21 and 1.008-2.035, respectively). Even in Marfan-characterized population, David V-UT provided satisfactory long-term outcome, comparable to other VSARR modifications. It is simple but can freely reproduce trilobed sinus with one straight

  7. Novel metal ion surface modification technique

    International Nuclear Information System (INIS)

    Brown, I.G.; Godechot, X.; Yu, K.M.

    1990-10-01

    We describe a method for applying metal ions to the near-surface region of solid materials. The added species can be energetically implanted below the surface or built up as a surface film with an atomically mixed interface with the substrate; the metal ion species can be the same as the substrate species or different from it, and more than one kind of metal species can be applied, either simultaneously or sequentially. Surface structures can be fabricated, including coatings and thin films of single metals, tailored alloys, or metallic multilayers, and they can be implanted or added onto the surface and ion beam mixed. We report two simple demonstrations of the method: implantation of yttrium into a silicon substrate at a mean energy of 70 keV and a dose of 1 x 10 16 atoms/cm 2 , and the formation of a titanium-yttrium multilayer structure with ion beam mixing to the substrate. 17 refs., 3 figs

  8. Modifications in Wheelchair Propulsion Technique with Speed.

    Science.gov (United States)

    Russell, Ian M; Raina, Shashank; Requejo, Philip S; Wilcox, Rand R; Mulroy, Sara; McNitt-Gray, Jill L

    2015-01-01

    Repetitive loading of the upper limb joints during manual wheelchair (WC) propulsion (WCP) has been identified as a factor that contributes to shoulder pain, leading to loss of independence and decreased quality of life. The purpose of this study was to determine how individual manual WC users with paraplegia modify propulsion mechanics to accommodate expected increases in reaction forces (RFs) generated at the pushrim with self-selected increases in WCP speed. Upper extremity kinematics and pushrim RFs were measured for 40 experienced manual WC users with paraplegia while propelling on a stationary ergometer at self-selected free and fast propulsion speeds. Upper extremity kinematics and kinetics were compared within subject between propulsion speeds. Between group and within-subject differences were determined (α = 0.05). Increased propulsion speed was accompanied by increases in RF magnitude (22 of 40, >10 N) and shoulder net joint moment (NJM, 15 of 40, >10 Nm) and decreases in pushrim contact duration. Within-subject comparison indicated that 27% of participants modified their WCP mechanics with increases in speed by regulating RF orientation relative to the upper extremity segments. Reorientation of the RF relative to the upper extremity segments can be used as an effective strategy for mitigating rotational demands (NJM) imposed on the shoulder at increased propulsion speeds. Identification of propulsion strategies that individuals can use to effectively accommodate for increases in RFs is an important step toward preserving musculoskeletal health of the shoulder and improving health-related quality of life.

  9. Corrosion principles and surface modification

    International Nuclear Information System (INIS)

    Kruger, J.

    1982-01-01

    This chapter examines the important strategies provided by the newer ideas of corrosion science and engineering that surface modification techniques must utilize to help prevent corrosion, especially the most damaging kind of aqueous corrosion, localized corrosion. Provides a brief introduction to the principles underlying the phenomenon of corrosion in order to use them to discuss surface modification strategies to combat corrosion. Discusses the electrochemistry of corrosion; the thermodynamics of corrosion; the kinetics of corrosion; thermodynamic strategies; and kinetic strategies (formation of more protective passive films; resistance to breakdown; ductility; repassivation)

  10. A simple measuring technique of surface flow velocity to analyze the behavior of velocity fields in hydraulic engineering applications.

    Science.gov (United States)

    Tellez, Jackson; Gomez, Manuel; Russo, Beniamino; Redondo, Jose M.

    2015-04-01

    An important achievement in hydraulic engineering is the proposal and development of new techniques for the measurement of field velocities in hydraulic problems. The technological advances in digital cameras with high resolution and high speed found in the market, and the advances in digital image processing techniques now provides a tremendous potential to measure and study the behavior of the water surface flows. This technique was applied at the Laboratory of Hydraulics at the Technical University of Catalonia - Barcelona Tech to study the 2D velocity fields in the vicinity of a grate inlet. We used a platform to test grate inlets capacity with dimensions of 5.5 m long and 4 m wide allowing a zone of useful study of 5.5m x 3m, where the width is similar of the urban road lane. The platform allows you to modify the longitudinal slopes from 0% to 10% and transversal slope from 0% to 4%. Flow rates can arrive to 200 l/s. In addition a high resolution camera with 1280 x 1024 pixels resolution with maximum speed of 488 frames per second was used. A novel technique using particle image velocimetry to measure surface flow velocities has been developed and validated with the experimental data from the grate inlets capacity. In this case, the proposed methodology can become a useful tools to understand the velocity fields of the flow approaching the inlet where the traditional measuring equipment have serious problems and limitations. References DigiFlow User Guide. (2012), (June). Russo, B., Gómez, M., & Tellez, J. (2013). Methodology to Estimate the Hydraulic Efficiency of Nontested Continuous Transverse Grates. Journal of Irrigation and Drainage Engineering, 139(10), 864-871. doi:10.1061/(ASCE)IR.1943-4774.0000625 Teresa Vila (1), Jackson Tellez (1), Jesus Maria Sanchez (2), Laura Sotillos (1), Margarita Diez (3, 1), and J., & (1), M. R. (2014). Diffusion in fractal wakes and convective thermoelectric flows. Geophysical Research Abstracts - EGU General Assembly 2014

  11. Perceptual Modification of the Built Environment to Influence Behavior Associated with Physical Activity: Quasi-Experimental Field Studies of a Stair Banister Illusion.

    Science.gov (United States)

    Masters, Rich; Capio, Catherine; Poolton, Jamie; Uiga, Liis

    2018-06-01

    Re-engineering the built environment to influence behaviors associated with physical activity potentially provides an opportunity to promote healthier lifestyles at a population level. Here we present evidence from two quasi-experimental field studies in which we tested a novel, yet deceptively simple, intervention designed to alter perception of, and walking behavior associated with, stairs in an urban area. Our objectives were to examine whether adjusting a stair banister has an influence on perceptions of stair steepness or on walking behavior when approaching the stairs. In study 1, we asked participants (n = 143) to visually estimate the steepness of a set of stairs viewed from the top, when the stair banister was adjusted so that it converged with or diverged from the stairs (± 1.91°) or remained neutral (± 0°). In study 2, the walking behavior of participants (n = 36) was filmed as they approached the stairs to descend, unaware of whether the banister converged, diverged, or was neutral. In study 1, participants estimated the stairs to be steeper if the banister diverged from, rather than converged with, the stairs. The effect was greater when participants were unaware of the adjustment. In study 2, walking speed was significantly slower when the banister diverged from, rather than converged with, the stairs. These findings encourage us to speculate about the potential to economically re-engineer features of the built environment to provide opportunities for action (affordances) that invite physical activity behavior or even promote safer navigation of the environment.

  12. Behaviorism

    Science.gov (United States)

    Moore, J.

    2011-01-01

    Early forms of psychology assumed that mental life was the appropriate subject matter for psychology, and introspection was an appropriate method to engage that subject matter. In 1913, John B. Watson proposed an alternative: classical S-R behaviorism. According to Watson, behavior was a subject matter in its own right, to be studied by the…

  13. mHealth Technologies to Influence Physical Activity and Sedentary Behaviors: Behavior Change Techniques, Systematic Review and Meta-Analysis of Randomized Controlled Trials.

    Science.gov (United States)

    Direito, Artur; Carraça, Eliana; Rawstorn, Jonathan; Whittaker, Robyn; Maddison, Ralph

    2017-04-01

    mHealth programs offer potential for practical and cost-effective delivery of interventions capable of reaching many individuals. To (1) compare the effectiveness of mHealth interventions to promote physical activity (PA) and reduce sedentary behavior (SB) in free-living young people and adults with a comparator exposed to usual care/minimal intervention; (2) determine whether, and to what extent, such interventions affect PA and SB levels and (3) use the taxonomy of behavior change techniques (BCTs) to describe intervention characteristics. A systematic review and meta-analysis following PRISMA guidelines was undertaken to identify randomized controlled trials (RCTs) comparing mHealth interventions with usual or minimal care among individuals free from conditions that could limit PA. Total PA, moderate-to-vigorous intensity physical activity (MVPA), walking and SB outcomes were extracted. Intervention content was independently coded following the 93-item taxonomy of BCTs. Twenty-one RCTs (1701 participants-700 with objectively measured PA) met eligibility criteria. SB decreased more following mHealth interventions than after usual care (standardised mean difference (SMD) -0.26, 95 % confidence interval (CI) -0.53 to -0.00). Summary effects across studies were small to moderate and non-significant for total PA (SMD 0.14, 95 % CI -0.12 to 0.41); MVPA (SMD 0.37, 95 % CI -0.03 to 0.77); and walking (SMD 0.14, 95 % CI -0.01 to 0.29). BCTs were employed more frequently in intervention (mean = 6.9, range 2 to 12) than in comparator conditions (mean = 3.1, range 0 to 10). Of all BCTs, only 31 were employed in intervention conditions. Current mHealth interventions have small effects on PA/SB. Technological advancements will enable more comprehensive, interactive and responsive intervention delivery. Future mHealth PA studies should ensure that all the active ingredients of the intervention are reported in sufficient detail.

  14. A study of laser surface modification of polymers: A comparison in air and water

    DEFF Research Database (Denmark)

    Marla, Deepak; Andersen, Sebastian A.; Zhang, Yang

    2018-01-01

    Laser surface modification is a technique to modify polymer surfaces for various applications. In our earlier work [Physics Procedia, 83:211–217, 2016], we showed that when the laser surface modification process was carried out in water instead of air, the obtained surface characteristics were...... research. The observed images of laser modified surfaces suggest that a hemispherical hump is formed in the case of water at lower laser fluences that breakup with an increase in fluence. Such a behavior was not observed when the process was carried out in air. We explain this phenomenon by simulating...

  15. Behavior Change Techniques in Physical Activity eHealth Interventions for People With Cardiovascular Disease: Systematic Review

    Science.gov (United States)

    Duff, Orlaith Mairead; Walsh, Deirdre MJ; Furlong, Bróna A; O'Connor, Noel E; Woods, Catherine B

    2017-01-01

    Background Cardiovascular disease (CVD) is the leading cause of premature death and disability in Europe, accounting for 4 million deaths per year and costing the European Union economy almost €196 billion annually. There is strong evidence to suggest that exercise-based secondary rehabilitation programs can decrease the mortality risk and improve health among patients with CVD. Theory-informed use of behavior change techniques (BCTs) is important in the design of cardiac rehabilitation programs aimed at changing cardiovascular risk factors. Electronic health (eHealth) is the use of information and communication technologies (ICTs) for health. This emerging area of health care has the ability to enhance self-management of chronic disease by making health care more accessible, affordable, and available to the public. However, evidence-based information on the use of BCTs in eHealth interventions is limited, and particularly so, for individuals living with CVD. Objective The aim of this systematic review was to assess the application of BCTs in eHealth interventions designed to increase physical activity (PA) in CVD populations. Methods A total of 7 electronic databases, including EBSCOhost (MEDLINE, PsycINFO, Academic Search Complete, SPORTDiscus with Full Text, and CINAHL Complete), Scopus, and Web of Science (Core Collection) were searched. Two authors independently reviewed references using the software package Covidence (Veritas Health Innovation). The reviewers met to resolve any discrepancies, with a third independent reviewer acting as an arbitrator when required. Following this, data were extracted from the papers that met the inclusion criteria. Bias assessment of the studies was carried out using the Cochrane Collaboration’s tool for assessing the risk of bias within Covidence; this was followed by a narrative synthesis. Results Out of the 987 studies that were identified, 14 were included in the review. An additional 9 studies were added following a

  16. Identifying similar and different factors effecting long-term cardiac exercise rehabilitation behavior modification between New Zealand and the United Kingdom.

    Science.gov (United States)

    Dunn, Stephanie; Lark, Sally; Fallows, Stephen

    2014-07-01

    Cardiac Rehabilitation (CR) programs are the most cost-effective measure for reducing morbidity associated with Coronary Vascular Disease (CVD). To be more effective there is a need to understand what influences the maintenance of healthy behaviors. This study identifies similar and different influences in CR of the United Kingdom (UK) and New Zealand (NZ). A retrospective study. Participants had previously been discharged from CR for 6 to 12+ months within the UK (n = 22) and NZ (n = 21). Participant's attended a focus group. Discussions were digitally recorded, transcribed then thematically analyzed. The CR programs were observed over 2 months to enable comment on findings relating to 'theory in practice.' Similar positive patient experiences influencing behavior between groups and countries were; support, education, positive attitude, and motivation. Companionship and exercising alongside people with similar health problems was the major determinant for positive exercise behavior. Barriers to maintaining exercise included; physical disabilities, time constraints, and weather conditions. NZ participants were more affected by external factors (eg, opportunity, access, and time). Both CR programs were successful in facilitating the maintenance of healthy lifestyles. Exercising with other cardiac patients for support in a structured environment was the strongest influence in maintaining healthy lifestyles beyond CR programs.

  17. Experimental approaches for distribution and behavior of water in PEMFC under flow direction and differential pressure using neutron imaging technique

    International Nuclear Information System (INIS)

    Kim, TaeJoo; Kim, JongRok; Sim, CheulMuu; Lee, SeungWook; Kaviany, Massound; Son, SangYoung; Kim, MooHwan

    2009-01-01

    In this investigation, we prepared a 3-parallel serpentine single PEMFC which has an active area of 25 cm 2 and a flow channel cross section of 1x1 mm. Distribution and transport of water in an operating PEMFC were observed by varying the flow directions (co-current and counter-current) in each channel and the differential pressures (100, 200, 300 kPa) applied between the anode and cathode channels. This investigation was performed at the neutron imaging facility at the NIST of which the collimation ratio and neutron fluence rate are 600, 7.2x10 6 n/s/cm 2 , respectively. Neutron image was continuously recorded by an amorphous silicon flat panel detector every 1 s during the operation of the fuel cell. It has been observed that the differential pressure affects the total amount of water produced while the flow direction affects the spatial distribution of water when the neutron images were analyzed for several different operating conditions. More specifically, the amount of water production in the fuel cell increased as the partial pressure increases at a given current density and the water production was more uniform for the counter current than the co-current case. It is shown that the neutron imaging technique is a powerful tool to visualize the PEMFC. The information on the water distribution and behavior at an operating PEMFC helps improve the efficiency of PEMFC.

  18. Characterization of Elastic and Plastic Behaviors in Steel Plate Based on Eddy Current Technique Using a Portable Impedance Analyzer

    Directory of Open Access Journals (Sweden)

    Meng Fanlin

    2017-01-01

    Full Text Available A portable impedance analyzer (PIA was developed based on a TiePie-HS3 device to provide the comparable impedance measurement accuracy of the Agilent 4294a impedance analyzer in the frequency range of 0~250 kHz. Then the PIA was applied to monitor the tensile stress-induced variation of the eddy current sensor’s impedance in a medium-carbon steel sample. A model of equivalent magnetic field induced by the elastic stress and the number of pinning sites indicated that the inductance of the eddy current loop firstly increased with the increase in the tensile stress and then decreased at the yield point of the material. The experimental results testified that the variation of impedance amplitude, the variation of phase angle, and the shift of two featured frequencies demonstrated opposite variation trends before and after the yield point, as predicated by the model. A new parameter, which combined the impedance variation information of the selected two frequencies, was found to exhibit nearly monotonous dependency on the tensile stress in elastic and plastic stages. The new parameter together with the developed portable impedance analyzer provided the solution to identify the elastic and plastic behaviors in ferromagnetic materials in practical applications with an eddy current technique.

  19. Experimental Assessment on the Hysteretic Behavior of a Full-Scale Traditional Chinese Timber Structure Using a Synchronous Loading Technique

    Directory of Open Access Journals (Sweden)

    XiWang Shi

    2018-01-01

    Full Text Available In traditional Chinese timber structures, few tie beams were used between columns, and the column base was placed directly on a stone base. In order to study the hysteretic behavior of such structures, a full-scale model was established. The model size was determined according to the requirements of an eighth grade material system specified in the architectural treatise Ying-zao-fa-shi written during the Song Dynasty. In light of the vertical lift and drop of the test model during horizontal reciprocating motions, the horizontal low-cycle reciprocating loading experiments were conducted using a synchronous loading technique. By analyzing the load-displacement hysteresis curves, envelope curves, deformation capacity, energy dissipation, and change in stiffness under different vertical loads, it is found that the timber frame exhibits obvious signs of self-restoring and favorable plastic deformation capacity. As the horizontal displacement increases, the equivalent viscous damping coefficient generally declines first and then increases. At the same time, the stiffness degrades rapidly first and then decreases slowly. Increasing vertical loading will improve the deformation, energy-dissipation capacity, and stiffness of the timber frame.

  20. The surface modification of polystyrene

    International Nuclear Information System (INIS)

    Tremlett, C.

    2000-03-01

    Polymers have ideal bulk properties for many applications. However, adhesion to many polymers is poor without surface pretreatment. This can result, for example, in peeling paint and printing, adhesive joint failure and bio-incompatibility. In applications such as painting, printing, adhesive bonding and biocompatibility, various cleaning or surface chemical modifications may be employed. A commodity polymer where pretreatment is sometimes needed is polystyrene. This project investigated, in detail, the effects of a novel method of modification namely mediated electrochemical oxidation (MEO), as a mode of surface modification on polystyrene and a comparison was made with other polymers. The resulting modification was investigated using a range of surface analysis techniques to obtain complementary information. These included, X-ray photoelectron spectroscopy, contact angles, static secondary ion mass spectrometry, atomic force microscopy, chemical derivatization, scanning electron microscopy, attenuated total reflection Fourier Transform infrared spectroscopy and composite lap shear joint testing. It has been shown that MEO modifies the surface of polystyrene introduced oxygen mainly as hydroxyl groups, and a small number of carbonyl groups, that are positioned only on the backbone hydrocarbon chain. This modification improved adhesion, was stable and samples could be stored in aqueous media. The resulting hydroxylation was further derivatized using an amino acid to provide a specialised surface. This was very different from the multiple oxygen functionalities introduced in the comparison studies by UV/ozone and plasma treatments. (author)

  1. Escitalopram or novel herbal mixture treatments during or following exposure to stress reduce anxiety-like behavior through corticosterone and BDNF modifications.

    Directory of Open Access Journals (Sweden)

    Ravid Doron

    Full Text Available Anxiety disorders are a major public health concern worldwide. Studies indicate that repeated exposure to adverse experiences early in life can lead to anxiety disorders in adulthood. Current treatments for anxiety disorders are characterized by a low success rate and are associated with a wide variety of side effects. The aim of the present study was to evaluate the anxiolytic effects of a novel herbal treatment, in comparison to treatment with the selective serotonin reuptake inhibitor escitalopram. We recently demonstrated the anxiolytic effects of these treatments in BALB mice previously exposed to one week of stress. In the present study, ICR mice were exposed to post natal maternal separation and to 4 weeks of unpredictable chronic mild stress in adolescence, and treated during or following exposure to stress with the novel herbal treatment or with escitalopram. Anxiety-like behavior was evaluated in the elevated plus maze. Blood corticosterone levels were evaluated using radioimmunoassay. Brain derived neurotrophic factor levels in the hippocampus were evaluated using enzyme-linked immunosorbent assay. We found that (1 exposure to stress in childhood and adolescence increased anxiety-like behavior in adulthood; (2 the herbal treatment reduced anxiety-like behavior, both when treated during or following exposure to stress; (3 blood corticosterone levels were reduced following treatment with the herbal treatment or escitalopram, when treated during or following exposure to stress; (4 brain derived neurotrophic factor levels in the hippocampus of mice treated with the herbal treatment or escitalopram were increased, when treated either during or following exposure to stress. This study expands our previous findings and further points to the proposed herbal compound's potential to be highly efficacious in treating anxiety disorders in humans.

  2. Evaluation of an osteoporosis and fall risk intervention program for community-dwelling elderly. A quasi-experimental study of behavioral modifications.

    Science.gov (United States)

    Grahn Kronhed, Ann-Charlotte; Blomberg, Carina; Löfman, Owe; Timpka, Toomas; Möller, Margareta

    2006-06-01

    Osteoporosis and fall fractures are increasing problems amongst the elderly. The aim of this study was to explore whether combined population-based and individual interventions directed at risk factors for osteoporosis and falls result in behavioral changes in an elderly population. A quasi-experimental design was used for the study. Persons aged >or=65 years were randomly selected in the intervention and control community. An intervention program was managed from the primary health care center and delivered to the community. Health education was designed to increase awareness of risk factors for the development of osteoporosis and falling. Questionnaires about lifestyle, health, previous fractures, safety behavior and physical activity level were distributed at baseline in 1989 and at the follow-ups in 1992 and 1994 in both communities. There was a difference of 17.7% between the dual intervention (receiving both population-based and individual interventions) and the control samples regarding the self-reported use of shoe/cane spikes, and a difference of 20.5% regarding the reported "moderate level" of physical activity in 1994. There was an increase in the number of participants in the dual intervention sample who, at baseline, had not reported equipping their homes with non-slip mats and removing loose rugs but who did report these changes in 1994. The increase in the reported use of shoe/cane spikes in the dual intervention sample was observed mainly for the period 1992-1994. A public health intervention model, including both population-based and individual interventions, can contribute to behavioral changes in the prevention of falls and changed physical activity patterns amongst elderly people.

  3. Corrosion and surface modification on biocompatible metals: A review.

    Science.gov (United States)

    Asri, R I M; Harun, W S W; Samykano, M; Lah, N A C; Ghani, S A C; Tarlochan, F; Raza, M R

    2017-08-01

    Corrosion prevention in biomaterials has become crucial particularly to overcome inflammation and allergic reactions caused by the biomaterials' implants towards the human body. When these metal implants contacted with fluidic environments such as bloodstream and tissue of the body, most of them became mutually highly antagonistic and subsequently promotes corrosion. Biocompatible implants are typically made up of metallic, ceramic, composite and polymers. The present paper specifically focuses on biocompatible metals which favorably used as implants such as 316L stainless steel, cobalt-chromium-molybdenum, pure titanium and titanium-based alloys. This article also takes a close look at the effect of corrosion towards the implant and human body and the mechanism to improve it. Due to this corrosion delinquent, several surface modification techniques have been used to improve the corrosion behavior of biocompatible metals such as deposition of the coating, development of passivation oxide layer and ion beam surface modification. Apart from that, surface texturing methods such as plasma spraying, chemical etching, blasting, electropolishing, and laser treatment which used to improve corrosion behavior are also discussed in detail. Introduction of surface modifications to biocompatible metals is considered as a "best solution" so far to enhanced corrosion resistance performance; besides achieving superior biocompatibility and promoting osseointegration of biocompatible metals and alloys. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Ion bombardment modification of surfaces

    International Nuclear Information System (INIS)

    Auciello, O.

    1984-01-01

    An historical overview of the main advances in the understanding of bombardment-induced surface topography is presented. The implantation and sputtering mechanisms which are relevant to ion bombardment modification of surfaces and consequent structural, electronic and compositional changes are described. Descriptions of plasma and ion-beam sputtering-induced film formation, primary ion-beam deposition, dual beam techniques, cluster of molecule ion-beam deposition, and modification of thin film properties by ion bombardment during deposition are presented. A detailed account is given of the analytical and computational modelling of topography from the viewpoint of first erosion theory. Finally, an account of the possible application and/or importance of textured surfaces in technologies and/or experimental techniques not considered in previous chapters is presented. refs.; figs.; tabs

  5. Development of a phantom mimicking the functional and structural behaviors of the thigh muscles characterized with magnetic resonance elastography technique.

    Science.gov (United States)

    Chakouch, Mashhour K; Charleux, Fabrice; Bensamoun, Sabine F

    2015-01-01

    Magnetic Resonance Elastography (MRE) is a non invasive technique based on the propagation of shear waves in soft tissues providing the quantification of the mechanical properties [1]. MRE was successfully applied to healthy and pathological muscles. However, the MRE muscle methods must be further improved to characterize the deep muscles. A way will be to develop phantom mimicking the muscle behavior in order to set up new MRE protocol. Thus, the purpose of this study is to create a phantom composed of a similar skeletal muscle architecture (fiber, aponorosis) and equivalent elastic properties as a function of the muscle state (passive or active). Two homogeneous phantoms were manufactured with different concentrations of plastisol to simulate the elastic properties in relaxed (50% of plastisol) and contracted (70% of plastisol) muscle conditions. Moreover, teflon tubing pipes (D = 0.9 mm) were thread in the upper part of the phantom (50%) to represent the muscle fibers and a plastic sheet (8 × 15 cm) was also included in the middle of the phantom to mimic the aponeurosis structure. Subsequently, MRE tests were performed with two different pneumatic drivers, tube and round, (f = 90Hz) to analyze the effect of the type of driver on the wave propagation. Then, the wavelength was measured from the phase images to obtain the elastic properties (shear modulus). Both phantoms revealed elastic properties which were in the same range as in vivo muscle in passive (μ(50%) = 2.40 ± 0.18 kPa ) and active (6.24 ± 0.21 kPa) states. The impact of the type of driver showed higher values (about 1.2kPa) with the tube. The analysis of the wave behavior revealed a sliding along the plastic sheet as it was observed for in vivo muscle study. The wave was also sensitive to the presence of the fibers where gaps were identified. The present study demonstrates the ability of the phantom to mimic the structural and functional properties of the muscle.

  6. Comprehensive study of the abrasive wear and slurry erosion behavior of an expanded system of high chromium cast iron and microstructural modification for enhanced wear resistance

    Science.gov (United States)

    Chung, Reinaldo Javier

    HCCIs by microstructural modification through addition of strong carbide-forming elements to produce eutectic microstructures reinforced with in-situ formed foreign carbides. Very promising results have been obtained in lab, which demonstrates that the approach is feasible and effective in tailoring HCCIs for improved performance.

  7. Effectiveness of nurse-led patient-centered care behavioral risk modification on secondary prevention of coronary heart disease: A systematic review.

    Science.gov (United States)

    Chiang, Chung-Yan; Choi, Kai-Chow; Ho, Ka-Ming; Yu, Sau-Fung

    2018-04-22

    Despite establishment of advocacies centered on using patient-centered care to improve disease-related behavioral changes and health outcomes, studies have seldom discussed incorporation of patient-centered care concept in the design of secondary cardiac prevention. This review aimed to identify, appraise, and examine existing evidence on the effectiveness of nurse-led patient-centered care for secondary cardiac prevention in patients with coronary heart disease. A systematic review of randomized controlled trials focusing on nurse-led patient-centered care for secondary cardiac prevention was conducted. Primary outcomes were behavioral risks (e.g. smoking, physical activity), secondary outcomes were clinically relevant physiological parameters (e.g. body weight, blood pressure, blood glucose, blood lipoproteins), health-related quality of life, mortality, and self efficacy. Twenty-three English and seven Chinese electronic databases were searched to identify the trials. The studies' eligibility and methodological quality were assessed by two reviewers independently according to the Joanna Briggs Institute guidelines. Statistical heterogeneities of the included studies were assessed by Higgins I2 and quantitative pooling was performed when studies showed sufficient comparability. 15 articles on 12 randomized controlled trials were included in this review. Methodological quality of the included studies was fair. Based on the Joanna Briggs Institute critical appraisal tool for experimental studies, the included studies had met a mean of six criteria out the ten in this appraisal tool. The meta-analyses of the included studies revealed that nurse-led patient-centered care had significantly improved patients' smoking habits, adherence toward physical activity advices, and total cholesterol level with medical regime optimization, in short- to medium-term. The intervention was also favorable in improving the patients' health-related quality of life in several domains of

  8. Development of Knowledge, Awareness, Global Warming Decreasing Behavior and Critical Thinking of Grade 11 Students Using the Four Noble Truths Method with Meta-Cognitive Techniques

    Science.gov (United States)

    Chattuchai, Sakkarin; Singseewo, Adisak; Suksringarm, Paitool

    2015-01-01

    This study aims to investigate the effects of learning environmental education on the knowledge, awareness, global warming decreasing behavior, and critical thinking of eighty grade 11 students from two classes. The Four Noble Truths method with metacognitive techniques and traditional teaching method were used for the investigation. The sample…

  9. Development of Environmental Knowledge, Team Working Skills and Desirable Behaviors on Environmental Conservation of Matthayomsuksa 6 Students Using Good Science Thinking Moves Method with Metacognition Techniques

    Science.gov (United States)

    Ladawan, Charinrat; Singseewo, Adisak; Suksringarm, Paitool

    2015-01-01

    The research aimed to investigate environmental knowledge, team working skills, and desirable behaviors of students learning through the good science thinking moves method with metacognition techniques. The sample group included Matthayomsuksa 6 students from Nadoon Prachasan School, Nadoon District, Maha Sarakham Province. The research tools were…

  10. The Turn the Tables Technique (T[cube]): A Program Activity to Provide Group Facilitators Insight into Teen Sexual Behaviors and Beliefs

    Science.gov (United States)

    Sclafane, Jamie Heather; Merves, Marni Loiacono; Rivera, Angelic; Long, Laura; Wilson, Ken; Bauman, Laurie J.

    2012-01-01

    The Turn the Tables Technique (T[cube]) is an activity designed to provide group facilitators who lead HIV/STI prevention and sexual health promotion programs with detailed and current information on teenagers' sexual behaviors and beliefs. This information can be used throughout a program to tailor content. Included is a detailed lesson plan of…

  11. Applied behavior analysis: behavior management of children with autism spectrum disorders in dental environments.

    Science.gov (United States)

    Hernandez, Purnima; Ikkanda, Zachary

    2011-03-01

    There are a limited number of studies addressing behavior management techniques and procedural modifications that dentists can use to treat people with an autism spectrum disorder (ASD). The authors conducted a search of the dental and behavioral analytic literature to identify management techniques that address problem behaviors exhibited by children with ASDs in dental and other health-related environments. Applied behavior analysis (ABA) is a science in which procedures are based on the principles of behavior through systematic experimentation. Clinicians have used ABA procedures successfully to modify socially significant behaviors of people with ASD. Basic behavior management techniques currently used in dentistry may not encourage people with cognitive and behavioral disabilities, such as ASD, to tolerate simple in-office dental procedures consistently. Instead, dental care providers often are required to use advanced behavior management techniques to complete simple in-office procedures such as prophylaxis, sealant placement and obtaining radiographs. ABA procedures can be integrated in the dental environment to manage problem behaviors often exhibited by children with an ASD. The authors found no evidence-based procedural modifications that address the behavioral characteristics and problematic behaviors of children with an ASD in a dental environment. Further research in this area should be conducted. Knowledge and in-depth understanding of behavioral principles is essential when a dentist is concerned with modifying behaviors. Using ABA procedures can help dentists manage problem behaviors effectively and systematically when performing routine dental treatment. Being knowledgeable about each patient's behavioral characteristics and the parents' level of involvement is important in the successful integration of the procedures and reduction of in-office time.

  12. Attack of the S. Mutans!: a stereoscopic-3D multiplayer direct-manipulation behavior-modification serious game for improving oral health in pre-teens

    Science.gov (United States)

    Hollander, Ari; Rose, Howard; Kollin, Joel; Moss, William

    2011-03-01

    Attack! of the S. Mutans is a multi-player game designed to harness the immersion and appeal possible with wide-fieldof- view stereoscopic 3D to combat the tooth decay epidemic. Tooth decay is one of the leading causes of school absences and costs more than $100B annually in the U.S. In 2008 the authors received a grant from the National Institutes of Health to build a science museum exhibit that included a suite of serious games involving the behaviors and bacteria that cause cavities. The centerpiece is an adventure game where five simultaneous players use modified Wii controllers to battle biofilms and bacteria while immersed in environments generated within a 11-foot stereoscopic WUXGA display. The authors describe the system and interface used in this prototype application and some of the ways they attempted to use the power of immersion and the appeal of S3D revolution to change health attitudes and self-care habits.

  13. Modification of hippocampal markers of synaptic plasticity by memantine in animal models of acute and repeated restraint stress: implications for memory and behavior.

    Science.gov (United States)

    Amin, Shaimaa Nasr; El-Aidi, Ahmed Amro; Ali, Mohamed Mostafa; Attia, Yasser Mahmoud; Rashed, Laila Ahmed

    2015-06-01

    Stress is any condition that impairs the balance of the organism physiologically or psychologically. The response to stress involves several neurohormonal consequences. Glutamate is the primary excitatory neurotransmitter in the central nervous system, and its release is increased by stress that predisposes to excitotoxicity in the brain. Memantine is an uncompetitive N-methyl D-aspartate glutamatergic receptors antagonist and has shown beneficial effect on cognitive function especially in Alzheimer's disease. The aim of the work was to investigate memantine effect on memory and behavior in animal models of acute and repeated restraint stress with the evaluation of serum markers of stress and the expression of hippocampal markers of synaptic plasticity. Forty-two male rats were divided into seven groups (six rats/group): control, acute restraint stress, acute restraint stress with Memantine, repeated restraint stress, repeated restraint stress with Memantine and Memantine groups (two subgroups as positive control). Spatial working memory and behavior were assessed by performance in Y-maze. We evaluated serum cortisol, tumor necrotic factor, interleukin-6 and hippocampal expression of brain-derived neurotrophic factor, synaptophysin and calcium-/calmodulin-dependent protein kinase II. Our results revealed that Memantine improved spatial working memory in repeated stress, decreased serum level of stress markers and modified the hippocampal synaptic plasticity markers in both patterns of stress exposure; in ARS, Memantine upregulated the expression of synaptophysin and brain-derived neurotrophic factor and downregulated the expression of calcium-/calmodulin-dependent protein kinase II, and in repeated restraint stress, it upregulated the expression of synaptophysin and downregulated calcium-/calmodulin-dependent protein kinase II expression.

  14. Using the Behavior Change Technique Taxonomy v1 to conceptualize the clinical content of Breaking Free Online: a computer-assisted therapy program for substance use disorders.

    Science.gov (United States)

    Dugdale, Stephanie; Ward, Jonathan; Hernen, Jan; Elison, Sarah; Davies, Glyn; Donkor, Daniel

    2016-07-22

    In recent years, research within the field of health psychology has made significant progress in terms of advancing and standardizing the science of developing, evaluating and reporting complex behavioral change interventions. A major part of this work has involved the development of an evidence-based Behavior Change Technique Taxonomy v1 (BCTTv1), as a means of describing the active components contained within such complex interventions. To date, however, this standardized approach derived from health psychology research has not been applied to the development of complex interventions for the treatment of substance use disorders (SUD). Therefore, this paper uses Breaking Free Online (BFO), a computer-assisted therapy program for SUD, as an example of how the clinical techniques contained within such an intervention might be mapped onto the BCTTv1. The developers of BFO were able to produce a full list of the clinical techniques contained within BFO. Exploratory mapping of the BCTTv1 onto the clinical content of the BFO program was conducted separately by the authors of the paper. This included the developers of the BFO program and psychology professionals working within the SUD field. These coded techniques were reviewed by the authors and any discrepancies in the coding were discussed between all authors until an agreement was reached. The BCTTv1 was mapped onto the clinical content of the BFO program. At least one behavioral change technique was found in 12 out of 16 grouping categories within the BCTTv1. A total of 26 out of 93 behavior change techniques were identified across the clinical content of the program. This exploratory mapping exercise has identified the specific behavior change techniques contained within BFO, and has provided a means of describing these techniques in a standardized way using the BCTTv1 terminology. It has also provided an opportunity for the BCTTv1 mapping process to be reported to the wider SUD treatment community, as it may have

  15. Behavior Change Techniques in Physical Activity eHealth Interventions for People With Cardiovascular Disease: Systematic Review.

    Science.gov (United States)

    Duff, Orlaith Mairead; Walsh, Deirdre Mj; Furlong, Bróna A; O'Connor, Noel E; Moran, Kieran A; Woods, Catherine B

    2017-08-02

    Cardiovascular disease (CVD) is the leading cause of premature death and disability in Europe, accounting for 4 million deaths per year and costing the European Union economy almost €196 billion annually. There is strong evidence to suggest that exercise-based secondary rehabilitation programs can decrease the mortality risk and improve health among patients with CVD. Theory-informed use of behavior change techniques (BCTs) is important in the design of cardiac rehabilitation programs aimed at changing cardiovascular risk factors. Electronic health (eHealth) is the use of information and communication technologies (ICTs) for health. This emerging area of health care has the ability to enhance self-management of chronic disease by making health care more accessible, affordable, and available to the public. However, evidence-based information on the use of BCTs in eHealth interventions is limited, and particularly so, for individuals living with CVD. The aim of this systematic review was to assess the application of BCTs in eHealth interventions designed to increase physical activity (PA) in CVD populations. A total of 7 electronic databases, including EBSCOhost (MEDLINE, PsycINFO, Academic Search Complete, SPORTDiscus with Full Text, and CINAHL Complete), Scopus, and Web of Science (Core Collection) were searched. Two authors independently reviewed references using the software package Covidence (Veritas Health Innovation). The reviewers met to resolve any discrepancies, with a third independent reviewer acting as an arbitrator when required. Following this, data were extracted from the papers that met the inclusion criteria. Bias assessment of the studies was carried out using the Cochrane Collaboration's tool for assessing the risk of bias within Covidence; this was followed by a narrative synthesis. Out of the 987 studies that were identified, 14 were included in the review. An additional 9 studies were added following a hand search of review paper references

  16. Application of Behavior Change Techniques in a Personalized Nutrition Electronic Health Intervention Study: Protocol for the Web-Based Food4Me Randomized Controlled Trial

    Science.gov (United States)

    Macready, Anna L; Fallaize, Rosalind; Butler, Laurie T; Ellis, Judi A; Kuznesof, Sharron; Frewer, Lynn J; Celis-Morales, Carlos; Livingstone, Katherine M; Araújo-Soares, Vera; Fischer, Arnout RH; Stewart-Knox, Barbara J; Mathers, John C

    2018-01-01

    Background To determine the efficacy of behavior change techniques applied in dietary and physical activity intervention studies, it is first necessary to record and describe techniques that have been used during such interventions. Published frameworks used in dietary and smoking cessation interventions undergo continuous development, and most are not adapted for Web-based delivery. The Food4Me study (N=1607) provided the opportunity to use existing frameworks to describe standardized Web-based techniques employed in a large-scale, internet-based intervention to change dietary behavior and physical activity. Objective The aims of this study were (1) to describe techniques embedded in the Food4Me study design and explain the selection rationale and (2) to demonstrate the use of behavior change technique taxonomies, develop standard operating procedures for training, and identify strengths and limitations of the Food4Me framework that will inform its use in future studies. Methods The 6-month randomized controlled trial took place simultaneously in seven European countries, with participants receiving one of four levels of personalized advice (generalized, intake-based, intake+phenotype–based, and intake+phenotype+gene–based). A three-phase approach was taken: (1) existing taxonomies were reviewed and techniques were identified a priori for possible inclusion in the Food4Me study, (2) a standard operating procedure was developed to maintain consistency in the use of methods and techniques across research centers, and (3) the Food4Me behavior change technique framework was reviewed and updated post intervention. An analysis of excluded techniques was also conducted. Results Of 46 techniques identified a priori as being applicable to Food4Me, 17 were embedded in the intervention design; 11 were from a dietary taxonomy, and 6 from a smoking cessation taxonomy. In addition, the four-category smoking cessation framework structure was adopted for clarity of

  17. Nucleation behavior of melted Bi films at cooling rates from 101 to 104 K/s studied by combining scanning AC and DC nano-calorimetry techniques

    International Nuclear Information System (INIS)

    Xiao, Kechao; Vlassak, Joost J.

    2015-01-01

    Highlights: • We proposed a general data reduction scheme that combines scanning AC and DC calorimetry results for the study of reaction kinetics. • Calorimetry measurements at cooling rates ranging from 30 K/s to 20,000 K/s were achieved. • Upon initial melting, the Bi thin-film sample breaks up into thousands of isolated islands, and highly repeatable nucleation behavior is observed. • The nucleation rate of melted Bi is calculated, which can be well described by classical nucleation theory over a wide range of cooling rates. - Abstract: We study the nucleation behavior of undercooled liquid Bi at cooling rates ranging from 10 1 to 10 4 K/s using a combination of scanning DC and AC nano-calorimetry techniques. Upon initial melting, the Bi thin-film sample breaks up into silicon nitride-coated isolated islands. The number of islands in a typical sample is sufficiently large that highly repeatable nucleation behavior is observed, despite the stochastic nature of the nucleation process. We establish a data reduction technique to evaluate the nucleation rate from DC and AC calorimetry results. The results show that the driving force for the nucleation of melted Bi is well described by classical nucleation theory over a wide range of cooling rates. The proposed technique provides a unique and efficient way to examine nucleation kinetics with cooling rates over several orders of magnitude. The technique is quite general and can be used to evaluate reaction kinetics in other materials

  18. Effects of aluminium surface morphology and chemical modification on wettability

    Energy Technology Data Exchange (ETDEWEB)

    Rahimi, M., E-mail: mar@sbi.aau.dk [Department of Energy and Environment, Danish Building Research Institute, Aalborg University, A.C. Meyers Vænge 15, 2450 København SV (Denmark); Fojan, P.; Gurevich, L. [Department of Physics and Nanotechnology, Aalborg University, Skjernvej 4, DK-9220 Aalborg East (Denmark); Afshari, A. [Department of Energy and Environment, Danish Building Research Institute, Aalborg University, A.C. Meyers Vænge 15, 2450 København SV (Denmark)

    2014-03-01

    Highlights: • Successful surface modification procedures on aluminium samples were performed involving formation of the layer of hydrophilic hyperbranched polyethyleneglycol (PEG) via in situ polymerization, molecular vapour deposition of a monolayer of fluorinated silane, and a combination of those. • The groups of surfaces with hydrophobic behavior were found to follow the Wenzel model. • A transition from Cassie–Baxter's to Wenzel's regime was observed due to changing of the surface roughness upon mechanical polishing in aluminium samples. - Abstract: Aluminium alloys are some of the predominant metals in industrial applications such as production of heat exchangers, heat pumps. They have high heat conductivity coupled with a low specific weight. In cold working conditions, there is a risk of frost formation on the surface of aluminium in the presence of water vapour, which can lead to the deterioration of equipment performance. This work addresses the methods of surface modification of aluminium and their effect of the underlying surface morphology and wettability, which are the important parameters for frost formation. Three groups of real-life aluminium surfaces of different morphology: unpolished aluminium, polished aluminium, and aluminium foil, were subjected to surface modification procedures which involved the formation of a layer of hydrophilic hyperbranched polyethyleneglycol via in situ polymerization, molecular vapour deposition of a monolayer of fluorinated silane, and a combination of those. The effect of these surface modification techniques on roughness and wettability of the aluminium surfaces was elucidated by ellipsometry, contact angle measurements and atomic force microscopy. We demonstrated that by employing different types of surface modifications the contact angle of water droplets on aluminium samples can be varied from 12° to more than 120°. A crossover from Cassie–Baxter to Wenzel regime upon changing the surface

  19. THE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE

    Directory of Open Access Journals (Sweden)

    B.M. Viswanatha

    2017-06-01

    Full Text Available The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that influenced the wear rate followed by sliding speed and applied load. The worn out surfaces were analyzed by SEM and EDS to study the subsurface mechanism of wear. The addition of reinforcements showed improved tribological behavior of the composite than base alloy.

  20. iLift: A health behavior change support system for lifting and transfer techniques to prevent lower-back injuries in healthcare.

    Science.gov (United States)

    Kuipers, Derek A; Wartena, Bard O; Dijkstra, Boudewijn H; Terlouw, Gijs; van T Veer, Job T B; van Dijk, Hylke W; Prins, Jelle T; Pierie, Jean Pierre E N

    2016-12-01

    Lower back problems are a common cause of sick leave of employees in Dutch care homes and hospitals. In the Netherlands over 40% of reported sick leave is due to back problems, mainly caused by carrying out heavy work. The goal of the iLift project was to develop a game for nursing personnel to train them in lifting and transfer techniques. The main focus was not on testing for the effectiveness of the game itself, but rather on the design of the game as an autogenous trigger and its place in a behavioral change support system. In this article, the design and development of such a health behavior change support system is addressed, describing cycles of design and evaluation. (a) To define the problem space, use context and user context, focus group interviews were conducted with Occupational Therapists (n=4), Nurses (n=10) and Caregivers (n=12) and a thematic analysis was performed. We interviewed experts (n=5) on the subject of lifting and transferring techniques. (b) A design science research approach resulted in a playable prototype. An expert panel conducted analysis of video-recorded playing activities. (c) Field experiment: We performed a dynamic analysis in order to investigate the feasibility of the prototype through biometric data from player sessions (n=620) by healthcare professionals (n=37). (a) Occupational Therapists, Nurses and Caregivers did not recognise a lack of knowledge with training in lifting and transferring techniques. All groups considered their workload, time pressure and a culturally determined habit to place the patient's well being above their own as the main reason not to apply appropriate lifting and transferring techniques. This led to a shift in focus from a serious game teaching lifting and transferring techniques to a health behavior change support system containing a game with the intention to influence behavior. (b) Building and testing (subcomponents of) the prototype resulted in design choices regarding players perspective

  1. Effects of controlled school-based multi-component model of nutrition and lifestyle interventions on behavior modification, anthropometry and metabolic risk profile of urban Asian Indian adolescents in North India.

    Science.gov (United States)

    Singhal, N; Misra, A; Shah, P; Gulati, S

    2010-04-01

    To study the effectiveness of a multi-component intervention model of nutrition and lifestyle education on behavior modification, anthropometry and metabolic risk profile of urban Asian-Indian adolescents in North India. Two schools matched for student strength and middle socioeconomic strata were randomly allocated to intervention and control group. Changes in nutrition-related knowledge, attitude, lifestyle practices, food frequency and body image of eleventh-grade students (15-17 years) in both schools were tested using a validated questionnaire. Anthropometric and biochemical measurements were made using standard methods. Segmental body composition analysis was carried out using an 8-electrode multifrequency bioelectrical impedance method of body fat estimation. At 6 months follow-up, significant improvement in several domains of knowledge was observed in intervention children (n=99; males=60; females=39) as compared with control school children (n=102; males=61; females=41). In the intervention group, significantly lower proportion of children consumed aerated drinks (15.1%; Phabits and lifestyle practices, and resulted in beneficial changes in anthropometric and biochemical profiles of the Asian Indian adolescents. This model should be applied on countrywide basis to prevent obesity and diabetes.

  2. Permit application modifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  3. The management of modifications

    International Nuclear Information System (INIS)

    Bernard, C.

    1992-01-01

    Description of the management methods of modifications at EDF. To maintain safety standards of the nuclear power station the 'Direction de l'Equipment' and the 'Direction du Parc en Exploitation' have jointly fixed the modalities of management for all modifications and recorded them in a 'Practical Guide'

  4. Permit application modifications

    International Nuclear Information System (INIS)

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils

  5. A Non-lethal water-based removal-reapplication technique for behavioral analysis of cuticular compounds of ants.

    Science.gov (United States)

    Roux, Olivier; Martin, Jean-Michel; Ghomsi, Nathan Tene; Dejean, Alain

    2009-08-01

    Interspecific relationships among insects are often mediated by chemical cues, including non-volatile cuticular compounds. Most of these compounds are hydrocarbons that necessitate the use of solvents for their extraction, identification, and manipulation during behavioral assays. The toxicity of these solvents often precludes the removal and reapplication of hydrocarbons from and to live insects. As a consequence, dummies often are used in behavioral assays, but their passivity can bias the behavior of the responding insects. To overcome these limitations, we propose a method where cuticular compounds are extracted from live ants by placing them into glass vials half-filled with tepid water (ca. 34 degrees C) and vigorously shaking the vials to form an emulsion whose supernatant can be analyzed and/or reapplied to other ants. We demonstrate that cuticular compounds can be extracted from workers of the red fire ant, Solenopsis saevissima, and reapplied to the cuticle of workers from a sympatric species, Camponotus blandus (both Hymenoptera: Formicidae), while keeping the ants alive. Gas chromatographic-mass spectrometric analysis and behavioral assays were used to confirm the successful transfer of the behaviorally active compounds.

  6. Isolation of Triterpenoid Glycoside from Bark of Terminalia arjuna using Chromatographic Technique and Investigation of Pharmacological Behavior upon Muscle Tissues

    Directory of Open Access Journals (Sweden)

    Tanushree Patnaik

    2007-01-01

    Full Text Available This study reports the isolation and characterization of a new triterpenoid glycoside extracted from the bark of Terminalia arjuna. The isolation of the organic compounds was done using simple chromatographic technique. Compound characterization using various spectroscopic technique identify the final isolated compound as Olean-3β,22β-diol-12-en-28β-D-glucopyranoside-oic acid. The method of isolation is simple, cost effective and efficient. The preliminary bioactivity of the compound was also evaluated.

  7. The computational nature of memory modification.

    Science.gov (United States)

    Gershman, Samuel J; Monfils, Marie-H; Norman, Kenneth A; Niv, Yael

    2017-03-15

    Retrieving a memory can modify its influence on subsequent behavior. We develop a computational theory of memory modification, according to which modification of a memory trace occurs through classical associative learning, but which memory trace is eligible for modification depends on a structure learning mechanism that discovers the units of association by segmenting the stream of experience into statistically distinct clusters (latent causes). New memories are formed when the structure learning mechanism infers that a new latent cause underlies current sensory observations. By the same token, old memories are modified when old and new sensory observations are inferred to have been generated by the same latent cause. We derive this framework from probabilistic principles, and present a computational implementation. Simulations demonstrate that our model can reproduce the major experimental findings from studies of memory modification in the Pavlovian conditioning literature.

  8. The computational nature of memory modification

    Science.gov (United States)

    Gershman, Samuel J; Monfils, Marie-H; Norman, Kenneth A; Niv, Yael

    2017-01-01

    Retrieving a memory can modify its influence on subsequent behavior. We develop a computational theory of memory modification, according to which modification of a memory trace occurs through classical associative learning, but which memory trace is eligible for modification depends on a structure learning mechanism that discovers the units of association by segmenting the stream of experience into statistically distinct clusters (latent causes). New memories are formed when the structure learning mechanism infers that a new latent cause underlies current sensory observations. By the same token, old memories are modified when old and new sensory observations are inferred to have been generated by the same latent cause. We derive this framework from probabilistic principles, and present a computational implementation. Simulations demonstrate that our model can reproduce the major experimental findings from studies of memory modification in the Pavlovian conditioning literature. DOI: http://dx.doi.org/10.7554/eLife.23763.001 PMID:28294944

  9. Behavior Modification: A Patient and Physician's Perspective.

    Science.gov (United States)

    Swanson, Elizabeth; Primack, Craig

    2017-03-01

    This article, co-authored by a patient affected by obesity and an obesity medicine specialist, discusses the patient's experience of living with the disease and using many different weight loss approaches until finding a lifestyle program that was appropriate for her metabolism. The physician discusses the scientific basis of insulin resistance, and why the chosen lifestyle program worked so well for this individual.

  10. A Micro-Scale Investigation on the Behaviors of Asphalt Mixtures under Freeze-Thaw Cycles Using Entropy Theory and a Computerized Tomography Scanning Technique

    Directory of Open Access Journals (Sweden)

    Huining Xu

    2018-01-01

    Full Text Available The thermodynamic behavior of asphalt mixtures is critical to the engineers since it directly relates to the damage in asphalt mixtures. However, most of the current research of the freeze-thaw damage of asphalt mixtures is focused on the bulk body from the macroscale and lacks a fundamental understanding of the thermodynamic behaviors of asphalt mixtures from the microscale perspective. In this paper, to identify the important thermodynamic behaviors of asphalt mixtures under freeze-thaw loading cycle, the information entropy theory, an X-ray computerized tomography (CT scanner and digital image processing technology are employed. The voids, the average size of the voids, the connected porosity, and the void number are extracted according to the scanned images. Based on the experiments and the CT scanned images, the information entropy evolution of the asphalt mixtures under different freeze-thaw cycles is calculated and the relationship between the change of information entropy and the pore structure characteristics is established. Then, the influences of different freezing and thawing conditions on the thermodynamic behaviors of asphalt mixtures are compared. The combination of information entropy theory and CT scanning technique proposed in this paper provides an innovative approach to investigate the thermodynamics behaviors of asphalt mixtures and a new way to analyze the freeze-thaw damage in asphalt mixtures.

  11. Communication-related behavior change techniques used in face-to-face lifestyle interventions in primary care: a systematic review of the literature.

    Science.gov (United States)

    Noordman, Janneke; van der Weijden, Trudy; van Dulmen, Sandra

    2012-11-01

    To systematically review the literature on the relative effectiveness of face-to-face communication-related behavior change techniques (BCTs) provided in primary care by either physicians or nurses to intervene on patients' lifestyle behavior. PubMed, EMBASE, PsychINFO, CINAHL and The Cochrane Library were searched for studies published before October 2010. Fifty studies were included and assessed on methodological quality. Twenty-eight studies reported significantly favorable health outcomes following communication-related BCTs. In these studies, 'behavioral counseling' was most frequently used (15 times), followed by motivational interviewing (eight times), education and advice (both seven times). Physicians and nurses seem equally capable of providing face-to-face communication-related BCTs in primary care. Behavioral counseling, motivational interviewing, education and advice all seem effective communication-related BCTs. However, BCTs were also found in less successful studies. Furthermore, based on existing literature, one primary care profession does not seem better equipped than the other to provide face-to-face communication-related BCTs. There is evidence that behavioral counseling, motivational interviewing, education and advice can be used as effective communication-related BCTs by physicians and nurses. However, further research is needed to examine the underlying working mechanisms of communication-related BCTs, and whether they meet the requirements of patients and primary care providers. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  12. A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement.

    Science.gov (United States)

    Giddings, V L; Kurtz, S M; Jewett, C W; Foulds, J R; Edidin, A A

    2001-07-01

    Polymethylmethacrylate (PMMA) bone cement is used in total joint replacements to anchor implants to the underlying bone. Establishing and maintaining the integrity of bone cement is thus of critical importance to the long-term outcome of joint replacement surgery. The goal of the present study was to evaluate the suitability of a novel testing technique, the small punch or miniaturized disk bend test, to characterize the elastic modulus and fracture behavior of PMMA. We investigated the hypothesis that the crack initiation behavior of PMMA during the small punch test was sensitive to the test temperature. Miniature disk-shaped specimens, 0.5 mm thick and 6.4 mm in diameter, were prepared from PMMA and Simplex-P bone cement according to manufacturers' instructions. Testing was conducted at ambient and body temperatures, and the effect of test temperature on the elastic modulus and fracture behavior was statistically evaluated using analysis of variance. For both PMMA materials, the test temperature had a significant effect on elastic modulus and crack initiation behavior. At body temperature, the specimens exhibited "ductile" crack initiation, whereas at room temperature "brittle" crack initiation was observed. The small punch test was found to be a sensitive and repeatable test method for evaluating the mechanical behavior of PMMA. In light of the results of this study, future small punch testing should be conducted at body temperature.

  13. Towards representing human behavior and decision making in Earth system models. An overview of techniques and approaches

    NARCIS (Netherlands)

    Müller-Hansen, Finn; Schlüter, Maja; Maes, Michael; Donges, Jonathan F.; Kolb, Jakob J.; Thonicke, Kirsten; Heitzig, Jobst

    2017-01-01

    Today, humans have a critical impact on the Earth system and vice versa, which can generate complex feedback processes between social and ecological dynamics. Integrating human behavior into formal Earth system models (ESMs), however, requires crucial modeling assumptions about actors and their

  14. Modifications to POISSON

    International Nuclear Information System (INIS)

    Harwood, L.H.

    1981-01-01

    At MSU we have used the POISSON family of programs extensively for magnetic field calculations. In the presently super-saturated computer situation, reducing the run time for the program is imperative. Thus, a series of modifications have been made to POISSON to speed up convergence. Two of the modifications aim at having the first guess solution as close as possible to the final solution. The other two aim at increasing the convergence rate. In this discussion, a working knowledge of POISSON is assumed. The amount of new code and expected time saving for each modification is discussed

  15. Development of nano-fabrication technique utilizing self-organizational behavior of point defects induced by ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Nitta, Noriko [Department of Environmental Systems Engineering, Kochi University of Technology, Tosayamada-Cho, Kochi-Prefecture 782-8502 (Japan); Taniwaki, Masafumi [Department of Environmental Systems Engineering, Kochi University of Technology, Tosayamada-Cho, Kochi-Prefecture 782-8502 (Japan)]. E-mail: taniwaki.masafumi@kochi-tech.ac.jp

    2006-04-01

    The present authors proposed a novel nano-fabrication technique that is able to arrange the fine cells orderly, based on their finding in GaSb implanted at a low temperature. In this article, first the experimental results that anomalous cellular structure was formed in GaSb by ion implantation is introduced and the self-organizational formation mechanism of the structure is described. Next a nano-fabrication technique that utilizes focused ion beam is described. This technique consists of two procedures, i.e. the formation process of the voids array and the development of the initial array to ordered cellular structure. Finally, the nano-fabrication is actually performed by this technique and their results are reported. Fabrication succeeded in structures where the dot (cell) interval was 100 nm or larger. The minimum ion dose for initial voids which develops to the ordered cellular structure is evaluated. It is also shown that the substrate temperature during implantation is an essential parameter for this technique.

  16. Development of nano-fabrication technique utilizing self-organizational behavior of point defects induced by ion irradiation

    International Nuclear Information System (INIS)

    Nitta, Noriko; Taniwaki, Masafumi

    2006-01-01

    The present authors proposed a novel nano-fabrication technique that is able to arrange the fine cells orderly, based on their finding in GaSb implanted at a low temperature. In this article, first the experimental results that anomalous cellular structure was formed in GaSb by ion implantation is introduced and the self-organizational formation mechanism of the structure is described. Next a nano-fabrication technique that utilizes focused ion beam is described. This technique consists of two procedures, i.e. the formation process of the voids array and the development of the initial array to ordered cellular structure. Finally, the nano-fabrication is actually performed by this technique and their results are reported. Fabrication succeeded in structures where the dot (cell) interval was 100 nm or larger. The minimum ion dose for initial voids which develops to the ordered cellular structure is evaluated. It is also shown that the substrate temperature during implantation is an essential parameter for this technique

  17. Behavioral management of the obese patient

    Science.gov (United States)

    Despite countless diets, exercise regimens, drugs, and behavior modification strategies, the prevalence of obesity continues its relentless increase in both developed and developing nations. Although many necessary components to treat obesity have been identified, behavior modification remains the b...

  18. A casting and imaging technique for determining void geometry and relative permeability behavior of a single fracture specimen

    Energy Technology Data Exchange (ETDEWEB)

    Cox, B.L.; Pruess, K.; Persoff, P.

    1990-01-01

    A casting technique has been developed for making translucent replicas of the void space of natural rock fractures. Attenuation of light shined through the cast combined with digital image analysis provides a pointwise definition of fracture apertures. The technique has been applied to a fracture specimen from Dixie Valley, Nevada, and the measured void space geometry has been used to develop theoretical predictions of two-phase relative permeability. A strong anisotropy in relative permeabilities has been found, which is caused by highly anisotropic spatial correlations among fracture apertures. 16 refs., 6 figs.

  19. Accommodating for plant modifications

    International Nuclear Information System (INIS)

    Weirich, P.H.

    1977-01-01

    Modification to a nuclear power plant may have different causes: 1) new instructions by the authorities; 2) changes of the marginal conditions on the construction site; 3) progress in the technological development. - Examples from different plants are supposed to demonstrate how such changes influence the planning or the construction and how they are integrated in the process of preparation. A distinction can be made between modifications before the completion of the submission of the order, during the phase of preparatory planning and during the construction phase. Of great importance are especially modifications made after the beginning of the construction works, since, in general, there is little scope for technical modifications and since consequences for the time schedule are to be expected. (orig.) [de

  20. Structural dynamic modification

    Indian Academy of Sciences (India)

    and stiffness matrices) andaor modal parameters, in order to acquire some ... For the above reasons, another modification approach is presented here ... The data necessary to solve the direct problem are dynamic behaviour of the original.

  1. Oscillatory Behavior during the Catalytic Partial Oxidation of Methane: Following Dynamic Structural Changes of Palladium Using the QEXAFS Technique

    DEFF Research Database (Denmark)

    Stoetzel, Jan; Frahm, Ronald; Kimmerle, Bertram

    2012-01-01

    oxidation of methane, the catalyst reduced from the end to the beginning of the catalyst bed and oxidized again toward the end as soon as the entire catalyst bed was reduced. On an entirely oxidized catalyst bed, only total oxidation of methane was observed and consumed the oxygen until the conditions...... of the Pd particles at increasing age of the catalyst was observed, which leads to a lower oscillation frequency. Effects of particle size, oven temperature, and oxygen/methane ratio on the oscillation behavior were studied in detail. The deactivation period (reoxidation of Pd) was much less influenced...... by the oven temperature than the ignition behavior of the catalytic partial oxidation of methane. This indicates that deactivation is caused by an autoreduction of the palladium at the beginning of the catalyst bed due to the high temperature achieved by total oxidation of methane....

  2. Appraisals of Intervention: The Mother's versus the Culprit's Behavior as Determinants of Children's Evaluations of Discipline Techniques.

    Science.gov (United States)

    Siegal, Michael; Cowen, Jan

    1984-01-01

    Twenty children in each of five groups (mean ages in years and months of 5-9, 8-9, 11-9, 14-7, and 17-8) were asked to evaluate the disciplinary techniques employed by mothers over a range of situations in which a culprit was described as having transgressed. Children's disciplinary preferences were examined, and ratings of different techniques…

  3. Pragmatic Graph Rewriting Modifications

    OpenAIRE

    Rodgers, Peter; Vidal, Natalia

    1999-01-01

    We present new pragmatic constructs for easing programming in visual graph rewriting programming languages. The first is a modification to the rewriting process for nodes the host graph, where nodes specified as 'Once Only' in the LHS of a rewrite match at most once with a corresponding node in the host graph. This reduces the previously common use of tags to indicate the progress of matching in the graph. The second modification controls the application of LHS graphs, where those specified a...

  4. The impacts of cognitive-behavioral therapy on the treatment of phobic disorders measured by functional neuroimaging techniques: a systematic review

    Directory of Open Access Journals (Sweden)

    Amanda Galvao-de Almeida

    2013-09-01

    Full Text Available Objective: Functional neuroimaging techniques represent fundamental tools in the context of translational research integrating neurobiology, psychopathology, neuropsychology, and therapeutics. In addition, cognitive-behavioral therapy (CBT has proven its efficacy in the treatment of anxiety disorders and may be useful in phobias. The literature has shown that feelings and behaviors are mediated by specific brain circuits, and changes in patterns of interaction should be associated with cerebral alterations. Based on these concepts, a systematic review was conducted aiming to evaluate the impact of CBT on phobic disorders measured by functional neuroimaging techniques. Methods: A systematic review of the literature was conducted including studies published between January 1980 and April 2012. Studies written in English, Spanish or Portuguese evaluating changes in the pattern of functional neuroimaging before and after CBT in patients with phobic disorders were included. Results: The initial search strategy retrieved 45 studies. Six of these studies met all inclusion criteria. Significant deactivations in the amygdala, insula, thalamus and hippocampus, as well as activation of the medial orbitofrontal cortex, were observed after CBT in phobic patients when compared with controls. Conclusion: In spite of their technical limitations, neuroimaging techniques provide neurobiological support for the efficacy of CBT in the treatment of phobic disorders. Further studies are needed to confirm this conclusion.

  5. Medium Modifications of Hadrons in Photon Induced Reactions

    International Nuclear Information System (INIS)

    Schadmand, S.

    2004-01-01

    Indications for in-medium modifications of hadron properties are reported from photoabsorption and meson production experiments. Strong medium modifications are observed in inclusive photoabsorption experiments and theoretical models investigate the in-medium dynamics of baryon resonances and their coupling to mesons. Recent experiments study the in-medium behavior of scalar and vector mesons where theoretical models expect in-medium modifications of the meson spectral functions that might be connected to partial restoration of chiral symmetry

  6. Modification of JRR-2

    International Nuclear Information System (INIS)

    Miyasaka, Yasuhiko

    1978-01-01

    This report gives an outline of some of the main modifications carried out around the Reactor Core on the Research Reactor JRR-2, at the Tokai Research Establishment of JAERI. The JRR-2 was shut down in December 1973, to improve it in heavy water leakage from the metal packing between core tank and support ring, corrosion of the lower shielding plug, and fault in the control-rod mechanism. Main modifications were a standing seal weld at the support ring to stop heavy water leakage, replacement of the reactor top shield and improvement of the helium system. The control-rod assemblies and the refueling devices were replaced by the newly designed ones also. In addition to the modification plan, the irradiated air exhaust system was improved to reduce radioactive argon gas release through the stack. Works were completed successfully in September 1975. But a light water leakage occurred at the stand pipe below the light water tank on November 11, 1975, which was repaired in about 4 months. When considering the operation of above 5,000 hours after the modification, however, the quality of the modification work may be said to be quite satisfactory. The present report in which works to the completion are described may be valuable as a record of reactor modification which is a new experience at JAERI. (auth.)

  7. Thermal expansion behavior study of Co nanowire array with in situ x-ray diffraction and x-ray absorption fine structure techniques

    Science.gov (United States)

    Mo, Guang; Cai, Quan; Jiang, Longsheng; Wang, Wei; Zhang, Kunhao; Cheng, Weidong; Xing, Xueqing; Chen, Zhongjun; Wu, Zhonghua

    2008-10-01

    In situ x-ray diffraction and x-ray absorption fine structure techniques were used to study the structural change of ordered Co nanowire array with temperature. The results show that the Co nanowires are polycrystalline with hexagonal close packed structure without phase change up until 700 °C. A nonlinear thermal expansion behavior has been found and can be well described by a quadratic equation with the first-order thermal expansion coefficient of 4.3×10-6/°C and the second-order thermal expansion coefficient of 5.9×10-9/°C. The mechanism of this nonlinear thermal expansion behavior is discussed.

  8. Simulation study on the behavior of X-rays and gamma rays in an inhomogeneous medium using the Monte Carlo technique

    International Nuclear Information System (INIS)

    Murase, Kenya; Kataoka, Masaaki; Kawamura, Masashi; Tamada, Shuji; Hamamoto, Ken

    1989-01-01

    A computer program based on the Monte Carlo technique was developed for the analysis of the behavior of X-rays and gamma rays in an inhomogeneous medium. The statistical weight of a photon was introduced and the survival biasing method was used for reducing the statistical error. This computer program has the mass energy absorption and attenuation coefficients for 69 tissues and organs as a database file, and can be applied to various cases of inhomogeneity. The simulation and experimental results of the central axis percent-depth dose in an inhomogeneous phantom were in good agreement. This computer program will be useful for analysis on the behavior of X-rays and gamma rays in an inhomogeneous medium consisting of various tissues and organs, not only in radiotherapy treatment planning but also in diagnostic radiology and in the field treating radiation protection. (author)

  9. Microstructure Characterization and Corrosion Resistance Behavior of New Cobalt-Free Maraging Steel Produced Through ESR Techniques

    Science.gov (United States)

    Seikh, Asiful H.; Halfa, Hossam; Baig, Muneer; Khan, Sohail M. A.

    2017-04-01

    In this study, two different grades (M23 and M29) of cobalt-free low nickel maraging steel have been produced through electroslag remelting (ESR) process. The corrosion resistance of these ESR steels was investigated in 1 M H2SO4 solution using linear potentiodynamic polarization (LPP) and electrochemical impedance spectroscopy (EIS) techniques. The experiments were performed for different immersion time and solution temperature. To evaluate the corrosion resistance of the ESR steels, some significant characterization parameters from LPP and EIS curves were analyzed and compared with that of conventional C250 maraging steel. Irrespective of measurement techniques used, the results show that the corrosion resistance of the ESR steels was higher than the C250 steel. The microstructure of ESR steels was composed of uniform and well-distributed martensite accompanied with little amount of retained austenite in comparison with C250 steel.

  10. Modelling of Mechanical Behavior at High Strain Rate of Ti-6al-4v Manufactured By Means of Direct Metal Laser Sintering Technique

    Science.gov (United States)

    Iannitti, Gianluca; Bonora, Nicola; Gentile, Domenico; Ruggiero, Andrew; Testa, Gabriel; Gubbioni, Simone

    2017-06-01

    In this work, the mechanical behavior of Ti-6Al-4V obtained by additive manufacturing technique was investigated, also considering the build direction. Dog-bone shaped specimens and Taylor cylinders were machined from rods manufactured by means of the EOSSINT M2 80 machine, based on Direct Metal Laser Sintering technique. Tensile tests were performed at strain rate ranging from 5E-4 s-1 to 1000 s-1 using an Instron electromechanical machine for quasistatic tests and a Direct-Tension Split Hopkinson Bar for dynamic tests. The mechanical strength of the material was described by a Johnson-Cook model modified to account for stress saturation occurring at high strain. Taylor cylinder tests and their corresponding numerical simulations were carried out in order to validate the constitutive model under a complex deformation path, high strain rates, and high temperatures.

  11. The development of human behavior analysis techniques - A study on knowledge representation methods for operator cognitive model

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Young Tack [Soongsil University, Seoul (Korea, Republic of)

    1996-07-01

    The main objective of this project is modeling of human operator in a main control room of Nuclear Power Plant. For this purpose, we carried out research on knowledge representation and inference method based on Rasmussen`s decision ladder structure. And we have developed SACOM(Simulation= Analyzer with a Cognitive Operator Model) using G2 shell on Sun workstations. SACOM consists of Operator Model, Interaction Analyzer, Situation Generator. Cognitive model aims to build a more detailed model of human operators in an effective way. SACOM is designed to model knowledge-based behavior of human operators more easily. The followings are main research topics carried out this year. First, in order to model knowledge-based behavior of human operators, more detailed scenarios are constructed. And, knowledge representation and inference methods are developed to support the scenarios. Second, meta knowledge structures are studied to support human operators 4 types of diagnoses. This work includes a study on meta and scheduler knowledge structures for generate-and-test, topographic, decision tree and case-based approaches. Third, domain knowledge structure are improved to support meta knowledge. Especially, domain knowledge structures are developed to model topographic diagnosis model. Fourth, more applicable interaction analyzer and situation generator are designed and implemented. The new version is implemented in G2 on Sun workstations. 35 refs., 49 figs. (author)

  12. Experimental apparatus and analysis technique for studying the low Reynolds number hydrodynamic behavior of water-borne particulates

    International Nuclear Information System (INIS)

    Chase, R.R.P.; Tisue, G.T.

    1975-01-01

    A unique laboratory apparatus has been designed, constructed, and tested for analyzing the low Reynolds number hydrodynamic behavior of water-borne particulates. The system consists of an isothermal sedimentation chamber, collimated light sources, photographic optics, and monitoring devices. This apparatus is capable of providing dynamic information on water-borne particulates in the size range 2 μm to 700 μm, while simulating a realistic environment. Because of its flexibility, the equipment is being used to determine the kinematic behavior of gravitationally unstable organic mineral aggregates. The importance of organic mineral aggregates has been well established during the past decade. This material is believed to be a potential food source for marine biota at the lowest levels of the food chain. Organic mineral aggregates are also known to concentrate trace elements and other toxic substances and may be part of the control mechanism by which elemental concentrations are maintained in the water column. The benthic fluid mud layer and deep pelagic nepholoid layer consist, in part, of these sediments. Subsea petroleum reserves are thought to be the result of biogeochemical cycling of the organic-mineral complex. Undoubtedly, a fundamental study of these aggregates would be of value to many research interests

  13. A Review of Training Methods and Instructional Techniques: Implications for Behavioral Skills Training in U.S. Astronauts (DRAFT)

    Science.gov (United States)

    Hysong, Sylvia J.; Galarza, Laura; Holland, Albert W.

    2007-01-01

    Long-duration space missions (LDM) place unique physical, environmental and psychological demands on crewmembers that directly affect their ability to live and work in space. A growing body of research on crews working for extended periods in isolated, confined environments reveals the existence of psychological and performance problems in varying degrees of magnitude. The research has also demonstrated that although the environment plays a cathartic role, many of these problems are due to interpersonal frictions (Wood, Lugg, Hysong, & Harm, 1999), and affect each individual differently. Consequently, crewmembers often turn to maladaptive behaviors as coping mechanisms, resulting in decreased productivity and psychological discomfort. From this body of research, critical skills have been identified that can help a crewmember better navigate the psychological challenges of long duration space flight. Although most people lack several of these skills, most of them can be learned; thus, a training program can be designed to teach crewmembers effective leadership, teamwork, and self-care strategies that will help minimize the emergence of maladaptive behaviors. Thus, it is the purpose of this report is twofold: 1) To review the training literature to help determine the optimal instructional methods to use in delivering psychological skill training to the U.S. Astronaut Expedition Corps, and 2) To detail the structure and content of the proposed Astronaut Expedition Corps Psychological Training Program.

  14. Effect of STOP technique on safety climate in a construction company.

    Science.gov (United States)

    Darvishi, Ebrahim; Maleki, Afshin; Dehestaniathar, Saeed; Ebrahemzadih, Mehrzad

    2015-01-01

    Safety programs are a core part of safety management in workplaces that can reduce incidents and injuries. The aim of this study was to investigate the influence of Safety Training Observation Program (STOP) technique as a behavior modification program on safety climate in a construction company. This cross-sectional study was carried out on workers of the Petrochemical Construction Company, western Iran. In order to improve safety climate, an unsafe behavior modification program entitled STOP was launched among workers of project during 12 months from April 2013 and April 2014. The STOP technique effectiveness in creating a positive safety climate was evaluated using the Safety Climate Assessment Toolkit. 76.78% of total behaviors were unsafe. 54.76% of total unsafe acts/ at-risk behaviors were related to the fall hazard. The most cause of unsafe behaviors was associated with habit and unavailability of safety equipment. After 12 month of continuous implementation the STOP technique, 55.8% of unsafe behaviors reduced among workers. The average score of safety climate evaluated using of the Toolkit, before and after the implementation of the STOP technique was 5.77 and 7.24, respectively. The STOP technique can be considered as effective approach for eliminating at-risk behavior, reinforcing safe work practices, and creating a positive safety climate in order to reduction incidents/injuries.

  15. Characterization of the corrosion behavior of different stainless steel alloys exposed to flowing fresh seawater, using E.I.S technique

    Energy Technology Data Exchange (ETDEWEB)

    Al Muhanna, K. [Petroleum Research and Studies Center, Kuwait Institute for Scientific Research, KISR, P.O.Box 24885, Safat 13109 Kuwait (Kuwait)

    2004-07-01

    E.I.S technique was used to characterize the corrosion behavior of UNS NO. S 31600 stainless steel, UNS NO. S 30400 stainless steel and UNS NO. S 62800 sanicro 28 exposed to continuous fresh Seawater. The total exposure time of the test was about 180 days. Two types of additives (4 ppm of Cl{sub 2} and 5 ppm of NH{sub 3}) were also added to the seawater to investigate their effect on the surfaces of these alloys. During the tests, no marine - macro fouling was observed on the surfaces of the tested alloys, as the seawater was filtrated at the Doha Desalination Research Center, where the study was carried out, but only a slimy layer spread on the whole surface of the alloys. The corrosion behavior of each alloy was monitored by the open circuit potential measurement, and the E.I.S technique using the EG and G 352 software and hardware instrument, where the resistance of the solution (R{sub sol}), the resistance of the surface of the tested alloy (R{sub p}), and the double layer capacitance (Cdl) was calculated. Under this study's experimental conditions, results indicated that the stainless steel alloys were highly resistant to marine fouling and corrosion in seawater, and were not affected by the aggressive additives, such as NH{sub 3}, and Cl{sub 2} in the seawater. (author)

  16. Analysis of the chemical elements behavior in leaves infected with fumagina employing X-ray fluorescence technique

    International Nuclear Information System (INIS)

    Blonski, Maria Selia

    2002-02-01

    Fumagina is produced by the Capnodium fungi, a mushroom from Dothideales order, that lives associated with the yellow aphid (Monelliopsis pecanis), excreting a heavy load of a sugared substance that provides the sooty fungus development, covering, in some cases the totality, of leaves, fruits and branches surfaces. One of the big problems caused by this disease is the physic photosynthesis stuckness, reducing in 98% the active photosynthesis radiation and in 70% the net photosynthesis. This photosynthesis reduction affects the plants carbohydrate reservoirs, resulting in reduced and bad qualified crops. It was employed the Energy Dispersion X-Ray Fluorescence Technique (EDXRF) to study the fumagina disease. The measurements were realized with infected and healthy leaves of citric plants (orange and lemon trees), collected at the Farm School of the State University of Londrina, and also leaves of icsora plant from Piracicaba-SP. Through this technique it was observed a metabolic disorder related to Fe and Ca elements. By comparing the EDXRF spectra of the healthy plant leaves with the infected ones, it was verified that the concentration of Ca is higher than the concentration Fe in leaves of healthy plants, while for the leaves of plants infected with fumagina, it was observed a higher concentration of Fe. Employing EDXRF and the emission/transmission method for the matrix effect correction, samples of the citric plants were also analysed in pellet. The elements K, Ca, Ti, Mn , Fe, Cu and Zn were quantified. It was verified a higher Fe concentration in fumagina samples compared to the samples without fumagina. For all the elements of interest the minimum level of detection found was at the order of μg g -1 . (author)

  17. How Can Smoking Cessation Be Induced Before Surgery? A Systematic Review and Meta-Analysis of Behavior Change Techniques and Other Intervention Characteristics

    Directory of Open Access Journals (Sweden)

    Andrew Prestwich

    2017-06-01

    Full Text Available Background: Smokers who continue to smoke up to the point of surgery are at increased risk of a range of complications during and following surgery.Objective: To identify whether behavioral and/or pharmacological interventions increase the likelihood that smokers quit prior to elective surgery and which intervention components are associated with larger effects.Design: Systematic review with meta-analysis.Data sources: MEDLINE, Embase, and Embase Classic, CINAHL, CENTRAL.Study selection: Studies testing the effect of smoking reduction interventions delivered at least 24 h before elective surgery were included.Study appraisal and synthesis: Potential studies were independently screened by two people. Data relating to study characteristics and risk of bias were extracted. The effects of the interventions on pre-operative smoking abstinence were estimated using random effects meta-analyses. The association between specific intervention components (behavior change techniques; mode; duration; number of sessions; interventionist and smoking cessation effect sizes were estimated using meta-regressions.Results: Twenty-two studies comprising 2,992 smokers were included and 19 studies were meta-analyzed. Interventions increased the proportion of smokers who were abstinent or reduced smoking by surgery relative to control: g = 0.56, 95% CI 0.32–0.80, with rates nearly double in the intervention (46.2% relative to the control (24.5%. Interventions that comprised more sessions, delivered face-to-face and by nurses, as well as specific behavior change techniques (providing information on consequence of smoking/cessation; providing information on withdrawal symptoms; goal setting; review of goals; regular monitoring by others; and giving options for additional or later support were associated with larger effects.Conclusion: Rates of smoking can be halved prior to surgery and a number of intervention characteristics can increase these effects. There was

  18. Implications of recent research on microstructure modifications, through heat-related processing and trait alteration to bio-functions, molecular thermal stability and mobility, metabolic characteristics and nutrition in cool-climate cereal grains and other types of seeds with advanced molecular techniques.

    Science.gov (United States)

    Ying, Yuguang; Zhang, Huihua; Yu, Peiqiang

    2018-02-16

    The cutting-edge synchrotron radiation based and globar-sourced vibrational infrared microspectroscopy have recently been developed. These novel techniques are able to reveal structure features at cellular and molecular levels with the tested tissues being intact. However, to date, the advanced techniques are unfamiliar or unknown to food and feed scientists and have not been used to study the molecular structure changes in cool-climate cereal grain seeds and other types of bio-oil and bioenergy seeds. This article aims to provide some recent research in cool-climate cereal grains and other types of seeds on molecular structures and metabolic characteristics of carbohydrate and protein, and implication of microstructure modification through heat-related processing and trait alteration to bio-functions, molecular thermal stability and mobility, and nutrition with advanced molecular techniques- synchrotron radiation based and globar-sourced vibrational infrared microspectroscopy in the areas of (1) Inherent microstructure of cereal grain seeds; (2) The nutritional values of cereal grains; (3) Impact and modification of heat-related processing to cereal grain; (4) Conventional nutrition evaluation methodology; (5) Synchrotron radiation-based and globar-sourced vibrational (micro)-spectroscopy for molecular structure study and molecular thermal stability and mobility, and (6) Recent molecular spectroscopic technique applications in research on raw, traits altered and processed cool-climate cereal grains and other types of seeds. The information described in this article gives better insights of research progress and update in cool-climate cereal grains and other seeds with advanced molecular techniques.

  19. Metal magnetic memory technique used to predict the fatigue crack propagation behavior of 0.45%C steel

    Energy Technology Data Exchange (ETDEWEB)

    Chongchong, Li [School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130 (China); National Key Lab for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072 (China); Lihong, Dong, E-mail: lihong.dong@126.com [National Key Lab for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072 (China); Haidou, Wang [National Key Lab for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072 (China); Guolu, Li [School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130 (China); Binshi, Xu [National Key Lab for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072 (China)

    2016-05-01

    Monitoring fatigue crack propagation behavior of ferromagnetic components is very important. In this paper, the tension–tension fatigue tests of center cracked tension (CCT) specimens were carried out; the variation regularity of both tangential and normal components of magnetic signals during fatigue process were investigated. The results showed that the initial abnormal signals which appeared at the notch were reversed after cyclic loading. The abnormal magnetic signals became more significant with the increase of fatigue cycles and reversed again after failure. The characteristic parameters, i.e., the peak value of tangential component, B{sub tp}, and maximum gradient value of normal component, K{sub m}, showed similar variation trends during the fatigue process, which can be divided into three different stages. An approximate linear relationship was found between the characteristic parameters and fatigue crack length 2a. The feasibility of predicting the fatigue crack propagation using the abnormal magnetic signals was discussed. What's more, the variation and distribution of the magnetic signals were also analyzed based on the theory of magnetic charge. - Highlights: • A novel and passive NDT method, i.e. MMMT method, is proposed. • Both tangential and normal components of magnetic signals were investigated. • The prediction of crack propagation by abnormal magnetic signals was discussed. • A linear relationship was found between the parameters and fatigue crack length 2a. • The parameters can be potentially used to evaluate the crack propagation state.

  20. Characterizing Active Ingredients of eHealth Interventions Targeting Persons With Poorly Controlled Type 2 Diabetes Mellitus Using the Behavior Change Techniques Taxonomy: Scoping Review.

    Science.gov (United States)

    Kebede, Mihiretu M; Liedtke, Tatjana P; Möllers, Tobias; Pischke, Claudia R

    2017-10-12

    The behavior change technique taxonomy v1 (BCTTv1; Michie and colleagues, 2013) is a comprehensive tool to characterize active ingredients of interventions and includes 93 labels that are hierarchically clustered into 16 hierarchical clusters. The aim of this study was to identify the active ingredients in electronic health (eHealth) interventions targeting patients with poorly controlled type 2 diabetes mellitus (T2DM) and relevant outcomes. We conducted a scoping review using the BCTTv1. Randomized controlled trials (RCTs), studies with or pre-post-test designs, and quasi-experimental studies examining efficacy and effectiveness of eHealth interventions for disease management or the promotion of relevant health behaviors were identified by searching PubMed, Web of Science, and PsycINFO. Reviewers independently screened titles and abstracts for eligibility using predetermined eligibility criteria. Data were extracted following a data extraction sheet. The BCTTv1 was used to characterize active ingredients of the interventions reported in the included studies. Of the 1404 unique records screened, 32 studies fulfilled the inclusion criteria and reported results on the efficacy and or or effectiveness of interventions. Of the included 32 studies, 18 (56%) were Web-based interventions delivered via personal digital assistant (PDA), tablet, computer, and/or mobile phones; 7 (22%) were telehealth interventions delivered via landline; 6 (19%) made use of text messaging (short service message, SMS); and 1 employed videoconferencing (3%). Of the 16 hierarchical clusters of the BCTTv1, 11 were identified in interventions included in this review. Of the 93 individual behavior change techniques (BCTs), 31 were identified as active ingredients of the interventions. The most common BCTs identified were instruction on how to perform behavior, adding objects to the environment, information about health consequences, self-monitoring of the outcomes and/or and prefers to be

  1. Investigating the Mechanical Behavior and Deformation Mechanisms of Ultrafinegrained Metal Films Using Ex-situ and In-situ TEM Techniques

    Science.gov (United States)

    Izadi, Ehsan

    Nanocrystalline (NC) and Ultrafine-grained (UFG) metal films exhibit a wide range of enhanced mechanical properties compared to their coarse-grained counterparts. These properties, such as very high strength, primarily arise from the change in the underlying deformation mechanisms. Experimental and simulation studies have shown that because of the small grain size, conventional dislocation plasticity is curtailed in these materials and grain boundary mediated mechanisms become more important. Although the deformation behavior and the underlying mechanisms in these materials have been investigated in depth, relatively little attention has been focused on the inhomogeneous nature of their microstructure (particularly originating from the texture of the film) and its influence on their macroscopic response. Furthermore, the rate dependency of mechanical response in NC/UFG metal films with different textures has not been systematically investigated. The objectives of this dissertation are two-fold. The first objective is to carry out a systematic investigation of the mechanical behavior of NC/UFG thin films with different textures under different loading rates. This includes a novel approach to study the effect of texture-induced plastic anisotropy on mechanical behavior of the films. Efforts are made to correlate the behavior of UFG metal films and the underlying deformation mechanisms. The second objective is to understand the deformation mechanisms of UFG aluminum films using in-situ transmission electron microscopy (TEM) experiments with Automated Crystal Orientation Mapping. This technique enables us to investigate grain rotations in UFG Al films and to monitor the microstructural changes in these films during deformation, thereby revealing detailed information about the deformation mechanisms prevalent in UFG metal films.

  2. Determination of the reproductive behavior of dairy cows, post-partum, by means of radio immunoassay (RIA) techniques

    International Nuclear Information System (INIS)

    Villalba, Patricio; Guerron, Edwin

    1992-01-01

    The main objective of this trial was to determine the post-partum ovaric activity in dairy cattle recently introduced in the Ecuadorian subtropic. On this trial, progesterone levels in milk of 114 post-partum cows from 6 different farms were determined. The progesterone level in milk was analyzed by RIA and the milk sampling was done according to established protocol. Additional data about management, nutritional condition and health of the animals were also taken in each farm. In the Santo Domingo valley, the ovaries of post-partum cows, with a good nutritious diet, start functioning after 54.21 days with a range of 10 to 161. The duration of the first oestral cycle was 24.07 with the range of 6 to 29 days. Fifty six cows (49.12 percent) remained pregnant up to the end of the trial and the average of interval calving was 409. 95 - 115. 69 days. In the area, there is high incidence of ovaric hypofunctions ( 30.70 percent) and return of anoestrus ( 14.03 percent). heats of the cows were observed ( 62.90 percent) by the farmers, but they were determined by progesterone levels, through RIA technique

  3. An investigation of particle behavior in gas-solid horizontal pipe flow by an extended LDA technique

    Energy Technology Data Exchange (ETDEWEB)

    Yong Lu; Donald H. Glass; William J. Easson [University of Edinburgh, Edinburgh (United Kingdom). Institute for Materials and Processes

    2009-12-15

    An extended Laser Doppler Anemometry (LDA) technique has been developed to measure the distributions of particle velocities and particle number rates over a whole pipe cross-section in a dilute pneumatic conveying system. The first extension concentrates on the transform matrix for predicting the laser beams' cross point in a pipe according to the shift coordinate of the 3D computer-controlled traverse system on which the probes of the LDA system were mounted. The second focuses on the proper LDA sample rate for the measurement of gas-solid pipe flow with polydisperse particles. A suitable LDA sample rate should ensure that enough data is recorded in the measurement interval to precisely calculate the particle mean velocity or other statistical values at every sample point. The present study explores the methodology as well as the fundamentals of measurements, using a laser facility, of the cross-sectional distributions of solid phase. In the horizontal gas-solid pipe flow (glass beads less than 110 {mu}m), the experimental data show that the cross-sectional flow patterns of the solid phase can be classified by annulus-like flow describing the axial particle velocity contours and stratified flow characterising particle number rate distribution over a cross-section. Thus, the cross-sectional flow pattern of the solid phase in a horizontal pipe may be annular or stratified dependent on whether the axial particle velocity or particle number rate is the phenomenon studied. 13 refs., 16 figs., 1 tab.

  4. Effect of surface modification and hybridization on dynamic ...

    Indian Academy of Sciences (India)

    Epoxy; Roystonea regia; glass; surface modification; hybridization; dynamic mechanical ... other advantages such as light weight, low cost, high specific ... ful technique to study the mechanical behaviour of mate- ... The test reveals response.

  5. Dynamic behavior of protium and deuterium implanted into an oxide ceramic studied by means of ERD techniques

    Energy Technology Data Exchange (ETDEWEB)

    Iizuka, Emi; Horikawa, Tomoaki; Tsuchiya, Bun; Soda, Kazuo; Morita, Kenji; Iwahara,; Hiroyasu, [Nagoya Univ. (Japan)

    1998-03-01

    We have investigated exchange of deuterium (or protium) implanted into an oxide ceramic, SrCe{sub 0.95}Yb{sub 0.05}O{sub 3-{delta}}, for protium (or deuterium) due to exposure to H{sub 2}O (or D{sub 2}O) vapor at room temperature by means of the elastic recoil detection (ERD) technique. It is found that D is completely exchanged for H by expose to H{sub 2}O vapor, while H is hardly exchanged for D by expose to D{sub 2}O vapor, namely there exists a great isotope difference between the exchange of D for H and that of H for D. This result suggests that the exchanges do not take place on a conventional model of following subsequent reactions; dissociative absorption at the surface, diffusion (H), replacement of D by H, diffusion (D), and release due to surface recombination, but on a new model of following reactions; dissociative absorption at the surface, diffusion and release through bulk recombination due to mixed molecule formation. In order to clarify the reaction leading to the great isotope difference, the experiments on the retention of H and D by simultaneous H{sup +}, D{sup +} implantation and the release of 5 keV D{sub 2}{sup +} implants by 0.5 keV H{sub 2}{sup +} irradiation and 5 keV H{sub 2}{sup +} implants by 0.5 keV D{sub 2}{sup +} irradiation have been done. The retention experiment shows that the D/H ratio of the saturation implantation concentration is 1.3. Competition among H-H, H-D and D-D bulk recombination prefers to enrich D, which is opposite to the isotope difference observed. The release experiment shows that the slow and continuous decay of 5 keV D{sub 2}{sup +} implants is induced by 0.5 keV H{sub 2}{sup +} irradiation for long term, while that of 5 keV H{sub 2}{sup +} implants is hardly induced by 0.5 keV D{sub 2}{sup +} irradiation for long term. The latter result suggests that the diffusion may play a major rule in the great isotope difference. (author)

  6. Identification and Interrogation of Combinatorial Histone Modifications

    Directory of Open Access Journals (Sweden)

    Kelly R Karch

    2013-12-01

    Full Text Available Histone proteins are dynamically modified to mediate a variety of cellular processes including gene transcription, DNA damage repair, and apoptosis. Regulation of these processes occurs through the recruitment of non-histone proteins to chromatin by specific combinations of histone post-translational modifications (PTMs. Mass spectrometry has emerged as an essential tool to discover and quantify histone PTMs both within and between samples in an unbiased manner. Developments in mass spectrometry that allow for characterization of large histone peptides or intact protein has made it possible to determine which modifications occur simultaneously on a single histone polypeptide. A variety of techniques from biochemistry, biophysics, and chemical biology have been employed to determine the biological relevance of discovered combinatorial codes. This review first describes advancements in the field of mass spectrometry that have facilitated histone PTM analysis and then covers notable approaches to probe the biological relevance of these modifications in their nucleosomal context.

  7. Cognitive-behavioral play therapy.

    Science.gov (United States)

    Knell, S M

    1998-03-01

    Discusses cognitive-behavioral play therapy (CBPT), a developmentally sensitive treatment for young children that relies on flexibility, decreased expectation for verbalizations by the child, and increased reliance on experiential approaches. The development of CBPT for preschool-age children provides a relatively unique adaptation of cognitive therapy as it was originally developed for adults. CBPT typically contains a modeling component through which adaptive coping skills are demonstrated. Through the use of play, cognitive change is communicated indirectly, and more adaptive behaviors can be introduced to the child. Modeling is tailored for use with many specific cognitive and behavioral interventions. Generalization and response prevention are important features of CBPT. With minor modifications, many of the principles of cognitive therapy, as delineated for use with adults, are applicable to young children. Case examples are presented to highlight the application of CBPT. Although CBPT has a sound therapeutic base and utilizes proven techniques, more rigorous empirical scrutiny is needed.

  8. A modification scheme for seismic acceleration - time histories

    International Nuclear Information System (INIS)

    Bethell, J.

    1979-05-01

    A technique is described for the modification of recorded earthquake acceleration-time histories which gives reduced peak accelerations whilst leaving other significant characteristics unchanged. Such modifications are of use in constructing design basis acceleration-time histories such that all important parameters conform to a specified return period. The technique is applied to two recordings from the 1966 Parkfield earthquake, their peak accelerations being reduced in each case from about 40% g to 25% g. (author)

  9. Electrochemical corrosion behavior of composite MAO/sol-gel coatings on magnesium alloy AZ91D using combined micro-arc oxidation and sol-gel technique

    International Nuclear Information System (INIS)

    Shang Wei; Chen Baizhen; Shi Xichang; Chen Ya; Xiao Xiang

    2009-01-01

    Protective composite coatings were obtained on a magnesium alloy by micro-arc oxidation (MAO) and sol-gel technique. The coatings consisted of a MAO layer and a sol-gel layer. The microstructure and composition of the MAO coating and the composite coatings were analyzed by scanning electron microscopy (SEM) and energy dispersive X-rays (EDX). Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and total immersion tests were used to evaluate the corrosion behavior of these coatings in a 3.5 wt.% NaCl solution. The results show that the sol-gel layer provides corrosion protection by physically sealing the pores in the MAO coating and acting as a barrier. The composite coatings can suppress the corrosion process by preventing the corrosive ions from transferring or diffusing to the magnesium alloy substrate. This enhances the corrosion resistance of the magnesium alloy AZ91D significantly

  10. Acculturation, Income and Vegetable Consumption Behaviors Among Latino Adults in the U.S.: A Mediation Analysis with the Bootstrapping Technique.

    Science.gov (United States)

    López, Erick B; Yamashita, Takashi

    2017-02-01

    This study examined whether household income mediates the relationship between acculturation and vegetable consumption among Latino adults in the U.S. Data from the 2009 to 2010 National Health and Nutrition Examination Survey were analyzed. Vegetable consumption index was created based on the frequencies of five kinds of vegetables intake. Acculturation was measured with the degree of English language use at home. Path model with bootstrapping technique was employed for mediation analysis. A significant partial mediation relationship was identified. Greater acculturation [95 % bias corrected bootstrap confident interval (BCBCI) = (0.02, 0.33)] was associated with the higher income and in turn, greater vegetable consumption. At the same time, greater acculturation was associated with lower vegetable consumption [95 % BCBCI = (-0.88, -0.07)]. Findings regarding the income as a mediator of the acculturation-dietary behavior relationship inform unique intervention programs and policy changes to address health disparities by race/ethnicity.

  11. Mapping Base Modifications in DNA by Transverse-Current Sequencing

    Science.gov (United States)

    Alvarez, Jose R.; Skachkov, Dmitry; Massey, Steven E.; Kalitsov, Alan; Velev, Julian P.

    2018-02-01

    Sequencing DNA modifications and lesions, such as methylation of cytosine and oxidation of guanine, is even more important and challenging than sequencing the genome itself. The traditional methods for detecting DNA modifications are either insensitive to these modifications or require additional processing steps to identify a particular type of modification. Transverse-current sequencing in nanopores can potentially identify the canonical bases and base modifications in the same run. In this work, we demonstrate that the most common DNA epigenetic modifications and lesions can be detected with any predefined accuracy based on their tunneling current signature. Our results are based on simulations of the nanopore tunneling current through DNA molecules, calculated using nonequilibrium electron-transport methodology within an effective multiorbital model derived from first-principles calculations, followed by a base-calling algorithm accounting for neighbor current-current correlations. This methodology can be integrated with existing experimental techniques to improve base-calling fidelity.

  12. Structural, nanomechanical and variable range hopping conduction behavior of nanocrystalline carbon thin films deposited by the ambient environment assisted filtered cathodic jet carbon arc technique

    Energy Technology Data Exchange (ETDEWEB)

    Panwar, O.S., E-mail: ospanwar@mail.nplindia.ernet.in [Polymorphic Carbon Thin Films Group, Physics of Energy Harvesting Division, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi - 110 012 (India); Rawal, Ishpal; Tripathi, R.K. [Polymorphic Carbon Thin Films Group, Physics of Energy Harvesting Division, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi - 110 012 (India); Srivastava, A.K. [Electron and Ion Microscopy, Sophisticated and Analytical Instruments, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi - 110 012 (India); Kumar, Mahesh [Ultrafast Opto-Electronics and Tetrahertz Photonics Group, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi - 110 012 (India)

    2015-04-15

    Highlights: • Nanocrystalline carbon thin films are grown by filtered cathodic jet carbon arc process. • Effect of gaseous environment on the properties of carbon films has been studied. • The structural and nanomechanical properties of carbon thin films have been studied. • The VRH conduction behavior in nanocrystalline carbon thin films has been studied. - Abstract: This paper reports the deposition and characterization of nanocrystalline carbon thin films by filtered cathodic jet carbon arc technique assisted with three different gaseous environments of helium, nitrogen and hydrogen. All the films are nanocrystalline in nature as observed from the high resolution transmission electron microscopic (HRTEM) measurements, which suggests that the nanocrystallites of size ∼10–50 nm are embedded though out the amorphous matrix. X-ray photoelectron spectroscopic studies suggest that the film deposited under the nitrogen gaseous environment has the highest sp{sup 3}/sp{sup 2} ratio accompanied with the highest hardness of ∼18.34 GPa observed from the nanoindentation technique. The film deposited under the helium gaseous environment has the highest ratio of the area under the Raman D peak to G peak (A{sub D}/A{sub G}) and the highest conductivity (∼2.23 S/cm) at room temperature, whereas, the film deposited under the hydrogen environment has the lowest conductivity value (2.27 × 10{sup −7} S/cm). The temperature dependent dc conduction behavior of all the nanocrystalline carbon thin films has been analyzed in the light of Mott’s variable range hopping (VRH) conduction mechanism and observed that all the films obey three dimension VRH conduction mechanism for the charge transport.

  13. Geometrically Consistent Mesh Modification

    KAUST Repository

    Bonito, A.

    2010-01-01

    A new paradigm of adaptivity is to execute refinement, coarsening, and smoothing of meshes on manifolds with incomplete information about their geometry and yet preserve position and curvature accuracy. We refer to this collectively as geometrically consistent (GC) mesh modification. We discuss the concept of discrete GC, show the failure of naive approaches, and propose and analyze a simple algorithm that is GC and accuracy preserving. © 2010 Society for Industrial and Applied Mathematics.

  14. Radiation modification of materials

    International Nuclear Information System (INIS)

    Pikaev, A.K.

    1987-01-01

    Industrial and radiation chemical processes of material modification based on cross-linking of polymers as a result of radiation are considered. Among them are production of cables and rods with irradiated modified insulation, production of hardened and thermo-shrinkaging polymer products (films, tubes, fashioned products), production of radiation cross-linked polyethylene foam, technology of radiation vulcanization of elastomers. Attention is paid to radiation plants on the basis of γ-sources and electron acceleratos as well as to radiation conditions

  15. Decrease of Bullying Behavior in Children Age School Based on Cognitive Behaviour Therapy

    Directory of Open Access Journals (Sweden)

    Dwi Indah Iswanti

    2017-07-01

    Full Text Available The violence that occurs in education is known as bullying. Violence can occur in mild degrees such as cheating on exams, to fights or beatings that result in death. Bullying in children often leads to school phobias (ask for school change, reduced learning concentration, decreased learning achievement, and likes to carry certain items. Interventions that can be done include Problem Solving Therapy (PST, Behavior Modification (behavior modification, and Cognitive Behavior Therapy (CBT. The purpose of this study was to produce CBT modules in school-aged children that were useful for reducing bullying behavior, using a pre-post test with control group design. The subject of this research is 52 elementary school age children in Tembalang District Semarang selected by purposive sampling technique. Data were collected using bullying behavior checklist, CBT module and workbook, then analyzed using T-Test. The results showed a decrease in bullying behavior in the intervention group after CBT Individual therapy was given.

  16. Microscale surface modifications for heat transfer enhancement.

    Science.gov (United States)

    Bostanci, Huseyin; Singh, Virendra; Kizito, John P; Rini, Daniel P; Seal, Sudipta; Chow, Louis C

    2013-10-09

    In this experimental study, two surface modification techniques were investigated for their effect on heat transfer enhancement. One of the methods employed the particle (grit) blasting to create microscale indentations, while the other used plasma spray coating to create microscale protrusions on Al 6061 (aluminum alloy 6061) samples. The test surfaces were characterized using scanning electron microscopy (SEM) and confocal scanning laser microscopy. Because of the surface modifications, the actual surface area was increased up to 2.8× compared to the projected base area, and the arithmetic mean roughness value (Ra) was determined to vary from 0.3 μm for the reference smooth surface to 19.5 μm for the modified surfaces. Selected samples with modified surfaces along with the reference smooth surface were then evaluated for their heat transfer performance in spray cooling tests. The cooling system had vapor-atomizing nozzles and used anhydrous ammonia as the coolant in order to achieve heat fluxes up to 500 W/cm(2) representing a thermal management setting for high power systems. Experimental results showed that the microscale surface modifications enhanced heat transfer coefficients up to 76% at 500 W/cm(2) compared to the smooth surface and demonstrated the benefits of these practical surface modification techniques to enhance two-phase heat transfer process.

  17. Albumin modification and fragmentation in renal disease.

    Science.gov (United States)

    Donadio, Carlo; Tognotti, Danika; Donadio, Elena

    2012-02-18

    Albumin is the most important antioxidant substance in plasma and performs many physiological functions. Furthermore, albumin is the major carrier of endogenous molecules and exogenous ligands. This paper reviews the importance of post-translational modifications of albumin and fragments thereof in patients with renal disease. First, current views and controversies on renal handling of proteins, mainly albumin, will be discussed. Post-translational modifications, namely the fragmentation of albumin found with proteomic techniques in nephrotic patients, diabetics, and ESRD patients will be presented and discussed. It is reasonable to hypothesize that proteolytic fragmentation of serum albumin is due to a higher susceptibility to proteases, induced by oxidative stress. The clinical relevance of the fragmentation of albumin has not yet been established. These modifications could affect some physiological functions of albumin and have a patho-physiological role in uremic syndrome. Proteomic analysis of serum allows the identification of over-expressed proteins and can detect post-translational modifications of serum proteins, hitherto hidden, using standard laboratory techniques. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Testing Behavior Change Techniques to Encourage Primary Care Physicians to Access Cancer Screening Audit and Feedback Reports: Protocol for a Factorial Randomized Experiment of Email Content

    Science.gov (United States)

    Witteman, Holly O; Bouck, Zachary; Bravo, Caroline A; Desveaux, Laura; Llovet, Diego; Presseau, Justin; Saragosa, Marianne; Taljaard, Monica; Umar, Shama; Grimshaw, Jeremy M; Tinmouth, Jill; Ivers, Noah M

    2018-01-01

    Background Cancer Care Ontario’s Screening Activity Report (SAR) is an online audit and feedback tool designed to help primary care physicians in Ontario, Canada, identify patients who are overdue for cancer screening or have abnormal results requiring follow-up. Use of the SAR is associated with increased screening rates. To encourage SAR use, Cancer Care Ontario sends monthly emails to registered primary care physicians announcing that updated data are available. However, analytics reveal that 50% of email recipients do not open the email and less than 7% click the embedded link to log in to their report. Objective The goal of the study is to determine whether rewritten emails result in increased log-ins. This manuscript describes how different user- and theory-informed messages intended to improve the impact of the monthly emails will be experimentally tested and how a process evaluation will explore why and how any effects observed were (or were not) achieved. Methods A user-centered approach was used to rewrite the content of the monthly email, including messages operationalizing 3 behavior change techniques: anticipated regret, material incentive (behavior), and problem solving. A pragmatic, 2x2x2 factorial experiment within a multiphase optimization strategy will test the redesigned emails with an embedded qualitative process evaluation to understand how and why the emails may or may not have worked. Trial outcomes will be ascertained using routinely collected administrative data. Physicians will be recruited for semistructured interviews using convenience and snowball sampling. Results As of April 2017, 5576 primary care physicians across the province of Ontario, Canada, had voluntarily registered for the SAR, and in so doing, signed up to receive the monthly email updates. From May to August 2017 participants received the redesigned monthly emails with content specific to their allocated experimental condition prompting use of the SAR. We have not yet

  19. Testing Behavior Change Techniques to Encourage Primary Care Physicians to Access Cancer Screening Audit and Feedback Reports: Protocol for a Factorial Randomized Experiment of Email Content.

    Science.gov (United States)

    Vaisson, Gratianne; Witteman, Holly O; Bouck, Zachary; Bravo, Caroline A; Desveaux, Laura; Llovet, Diego; Presseau, Justin; Saragosa, Marianne; Taljaard, Monica; Umar, Shama; Grimshaw, Jeremy M; Tinmouth, Jill; Ivers, Noah M

    2018-02-16

    Cancer Care Ontario's Screening Activity Report (SAR) is an online audit and feedback tool designed to help primary care physicians in Ontario, Canada, identify patients who are overdue for cancer screening or have abnormal results requiring follow-up. Use of the SAR is associated with increased screening rates. To encourage SAR use, Cancer Care Ontario sends monthly emails to registered primary care physicians announcing that updated data are available. However, analytics reveal that 50% of email recipients do not open the email and less than 7% click the embedded link to log in to their report. The goal of the study is to determine whether rewritten emails result in increased log-ins. This manuscript describes how different user- and theory-informed messages intended to improve the impact of the monthly emails will be experimentally tested and how a process evaluation will explore why and how any effects observed were (or were not) achieved. A user-centered approach was used to rewrite the content of the monthly email, including messages operationalizing 3 behavior change techniques: anticipated regret, material incentive (behavior), and problem solving. A pragmatic, 2x2x2 factorial experiment within a multiphase optimization strategy will test the redesigned emails with an embedded qualitative process evaluation to understand how and why the emails may or may not have worked. Trial outcomes will be ascertained using routinely collected administrative data. Physicians will be recruited for semistructured interviews using convenience and snowball sampling. As of April 2017, 5576 primary care physicians across the province of Ontario, Canada, had voluntarily registered for the SAR, and in so doing, signed up to receive the monthly email updates. From May to August 2017 participants received the redesigned monthly emails with content specific to their allocated experimental condition prompting use of the SAR. We have not yet begun analyses. This study will inform

  20. Biomaterials modification by ion beam

    International Nuclear Information System (INIS)

    Zhang Tonghe; Yi Zhongzhen; Zhang Xu; Wu Yuguang

    2001-01-01

    Ion beam technology is one of best ways for the modification of biomaterials. The results of ion beam modification of biomaterials are given. The method and results of improved biocompatibility are indicated by ion beam technology. The future development of ion beam modification of biomaterials is discussed

  1. Posttranslational modifications of proteins : tools for functional proteomics [Methods in molecular biology, v. 194

    National Research Council Canada - National Science Library

    Kannicht, Christoph

    2002-01-01

    ... single glycosylation sites in a protein. Additional powerful techniques facilitate the analysis of glycosylphosphatidylinositols, lipid modifications, protein phosphorylation and sulfation, protein methylation and acetylation, a-amidation...

  2. Dutch Young Adults Ratings of Behavior Change Techniques Applied in Mobile Phone Apps to Promote Physical Activity: A Cross-Sectional Survey.

    Science.gov (United States)

    Belmon, Laura S; Middelweerd, Anouk; Te Velde, Saskia J; Brug, Johannes

    2015-11-12

    Interventions delivered through new device technology, including mobile phone apps, appear to be an effective method to reach young adults. Previous research indicates that self-efficacy and social support for physical activity and self-regulation behavior change techniques (BCT), such as goal setting, feedback, and self-monitoring, are important for promoting physical activity; however, little is known about evaluations by the target population of BCTs applied to physical activity apps and whether these preferences are associated with individual personality characteristics. This study aimed to explore young adults' opinions regarding BCTs (including self-regulation techniques) applied in mobile phone physical activity apps, and to examine associations between personality characteristics and ratings of BCTs applied in physical activity apps. We conducted a cross-sectional online survey among healthy 18 to 30-year-old adults (N=179). Data on participants' gender, age, height, weight, current education level, living situation, mobile phone use, personality traits, exercise self-efficacy, exercise self-identity, total physical activity level, and whether participants met Dutch physical activity guidelines were collected. Items for rating BCTs applied in physical activity apps were selected from a hierarchical taxonomy for BCTs, and were clustered into three BCT categories according to factor analysis: "goal setting and goal reviewing," "feedback and self-monitoring," and "social support and social comparison." Most participants were female (n=146), highly educated (n=169), physically active, and had high levels of self-efficacy. In general, we observed high ratings of BCTs aimed to increase "goal setting and goal reviewing" and "feedback and self-monitoring," but not for BCTs addressing "social support and social comparison." Only 3 (out of 16 tested) significant associations between personality characteristics and BCTs were observed: "agreeableness" was related to

  3. Cigar Product Modification Among High School Youth.

    Science.gov (United States)

    Trapl, Erika S; Koopman Gonzalez, Sarah J; Cofie, Leslie; Yoder, Laura D; Frank, Jean; Sterling, Kymberle L

    2018-02-07

    Prevalence of cigar use has been increasing among youth. Research indicates that youth are modifying cigar products either by "freaking" (ie, removing the filter paper) or "blunting" (removing the tobacco and supplementing or replacing with marijuana), yet little is known about youth who engage in this behavior. Thus, this study examines demographic and concurrent substance use behaviors of youth who modify cigars. Data from the 2013 Cuyahoga County Youth Risk Behavior survey were examined (n = 16 855). The survey collected data on demographics, cigar product use, cigar modification behaviors, and current cigarette, hookah and marijuana use. Responses to cigar product use items were used to create a composite to classify youth in one of eight unique user categories. Univariate and bivariate statistics were calculated using SPSS complex samples procedures. Overall, 15.2% reported current cigar product use, 11.0% reported current freaking, and 18.5% reported current blunt use; taken together, 25.3% of respondents reported any current use of a cigar product. When examined by user category, of those who endorsed any cigar product use, cigars, cigarillos, and little cigars use only was most endorsed (26.3%), followed by Blunt only (25.2%) and all three (ie, cigars, cigarillos, and little cigars, freaking, and blunting; 17.4%). A substantial proportion of high school youth who report using cigar products are modifying them in some way, with nearly half freaking and nearly two-thirds blunting. Given the FDA Center for Tobacco products recent extension of its regulatory authority to include cigar products, it is imperative to understand more about the prevalence of and reasons for cigar modification behaviors. Although the FDA has recently enacted regulatory authority over cigar products, little is known about cigar product modification. This is the first study to concurrently examine two unique cigar modification behaviors, "freaking" (ie, removing the filter paper) and

  4. Genetic modification and genetic determinism

    Science.gov (United States)

    Resnik, David B; Vorhaus, Daniel B

    2006-01-01

    In this article we examine four objections to the genetic modification of human beings: the freedom argument, the giftedness argument, the authenticity argument, and the uniqueness argument. We then demonstrate that each of these arguments against genetic modification assumes a strong version of genetic determinism. Since these strong deterministic assumptions are false, the arguments against genetic modification, which assume and depend upon these assumptions, are therefore unsound. Serious discussion of the morality of genetic modification, and the development of sound science policy, should be driven by arguments that address the actual consequences of genetic modification for individuals and society, not by ones propped up by false or misleading biological assumptions. PMID:16800884

  5. Characterization and modification of selected bioplastics

    Science.gov (United States)

    Wei, Liqing

    Bioplastics are becoming increasingly prominent mainly due to the growing environmental pollutions caused by non-biodegradable plastics. Polyhydroxybutyrate-co-hydroxyvalerate (PHBV), the major copolymer of polyhydroxyalkanoates (PHAs) family, was biosynthesized (by mixed microbial culture fed with fermented diary manure) and characterized. The monomeric composition (HV% ~ 40%) was determined by GC-MS and NMR. ESI-MSn and NMR analyses showed these PHBVs had random co-monomeric sequence distribution; meantime, they showed characteristic properties (crystallinity, single melting, and tensile properties) as studied by DSC and DMA. The homopolymer poly(3-hydroxybutyrate) (PHB), usually shows interesting properties such as high crystallinity and multiple melting behaviors. The effect of thermal history, such as crystallization (isothermal (temepratures = 80 to 140 °C) and nonisothermal (cooling rates = 2 to 50 °C/min)) and melting (heating rates = 5 to 50 °C/min), on the multiple melting behavior of PHB has been studied using conventional and temperature modulated DSC (TMDSC) techniques. Results showed PHB multiple melting was ascribed to the melting-recrystallization-remelting mechanism and its crystallization kinetics varied with crystallization temperatures and cooling rates. The brittleness and poor melt strength properties of the bioplastics PHB and poly L-lactic acid (PLLA) were imporved by two strategies: (i) to modify polymer structures by cross-linking, (ii) to introduce an external component by grafting, which were initiated by dicumyl peroxide (DCP) via reactive extrusion, have been developed. In method (i), rheological measurements showed cross-linked PHB and PLLA (0.25 to 1 wt% DCP) separately had higher melting strength than their linear polymers due to the formation of long chain branching. Their brittleness was reduced because smaller crystal sizes were observed by hot-stage polarized microscope (HS-POM), meanwhile the reduction of crystallinity was

  6. Induction of surface modification of polytetrafluoroethylene with proton ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Noh, I S; Kim, H R; Choi, Y J; Park, H S [Seoul National Univ. of Technology, Seoul (Korea, Republic of)

    2007-04-15

    Cardiovascular disease is one of the leading causes of the death in the USA and developed countries. More than 570,000 artery bypass graft surgeries per USA are performed each year, though percutaneous devices have abounded in extreme cases. Based on the surgery follow-ups, large diameter expanded polytetrafluoroethylene (ePTFE) (>5 mm) are clinically employed with good results but its clinical applications in smaller vessels is still problematic due to thrombosis and neointima formation. Achievement of high patency grafts has been to some extent achieved by numerous methods of surface modification techniques, but its results are less than its initial hopes. As examples, endothelial cells coated on the luminal surface of ePTFE has demonstrated limited success after recirculation. Surface modifications of PTFE film with either argon ion beam or UV light from Xe-excimer lamp were reported to increase its interaction with vascular endothelial cell. Surface modification of poly(lactide-co-glycolide)[PLGA] is also very important in tissue engineering, in where induction of its initial high cellular adhesion and spreading is a critical step for development of tissue engineering medical products. We previously reported tissue engineering of the hybrid ePTFE scaffold by seeding smooth muscle cells and subsequently evaluation of its tissue regeneration behaviors and stabilities with circulation of pulsatile flow. To improve its tissue engineering more quickly, we here performed surface modification of ePTFE and porous PLGA scaffold and evaluated its subsequent chemical and biological properties after treating its surface with low energy ion beams. The porous ePTFE was prepared in a round shape (diameter = 1 cm) and dried after organic solvent extraction for ion beam treatment. Another porous PLGA layers (d = 1 cm, t = 1 cm with approximately 92% porosity) were fabricated and treated its surface by irradiating low energy either nitrogen or argon ion beams (1 keV, 1x1015 ions

  7. Induction of surface modification of polytetrafluoroethylene with proton ion beams

    International Nuclear Information System (INIS)

    Noh, I. S.; Kim, H. R.; Choi, Y. J.; Park, H. S.

    2007-04-01

    Cardiovascular disease is one of the leading causes of the death in the USA and developed countries. More than 570,000 artery bypass graft surgeries per USA are performed each year, though percutaneous devices have abounded in extreme cases. Based on the surgery follow-ups, large diameter expanded polytetrafluoroethylene (ePTFE) (>5 mm) are clinically employed with good results but its clinical applications in smaller vessels is still problematic due to thrombosis and neointima formation. Achievement of high patency grafts has been to some extent achieved by numerous methods of surface modification techniques, but its results are less than its initial hopes. As examples, endothelial cells coated on the luminal surface of ePTFE has demonstrated limited success after recirculation. Surface modifications of PTFE film with either argon ion beam or UV light from Xe-excimer lamp were reported to increase its interaction with vascular endothelial cell. Surface modification of poly(lactide-co-glycolide)[PLGA] is also very important in tissue engineering, in where induction of its initial high cellular adhesion and spreading is a critical step for development of tissue engineering medical products. We previously reported tissue engineering of the hybrid ePTFE scaffold by seeding smooth muscle cells and subsequently evaluation of its tissue regeneration behaviors and stabilities with circulation of pulsatile flow. To improve its tissue engineering more quickly, we here performed surface modification of ePTFE and porous PLGA scaffold and evaluated its subsequent chemical and biological properties after treating its surface with low energy ion beams. The porous ePTFE was prepared in a round shape (diameter = 1 cm) and dried after organic solvent extraction for ion beam treatment. Another porous PLGA layers (d = 1 cm, t = 1 cm with approximately 92% porosity) were fabricated and treated its surface by irradiating low energy either nitrogen or argon ion beams (1 keV, 1x1015 ions

  8. Structure modification of particle track membranes

    International Nuclear Information System (INIS)

    Lueck, H.B.; Gemende, B.; Heinrich, B.

    1991-01-01

    Three different structure modifications were studied in order to improve the flux and dirt loading capacity of particle track membranes without affecting their retention characteristic. Divergent irradiation is a very effective tool for decreasing the number of multiple pores and increasing the porosity up to 20 per cent. The technique leads to a remarkable but not efficient enhancement of the surface porosity. Improved surface porosity produced by a double irradiation technique turns out to be very effective with respect to the filtration performance. (author)

  9. A Technique: Exposure Therapy

    Directory of Open Access Journals (Sweden)

    Serkan AKKOYUNLU

    2013-08-01

    Conclusion: Exposure with response prevention is a basic and effective technique. Every cognitive behavior therapist must be able to implement this technique and be cognizant of pearls of this procedure. (Journal of Cognitive Behavioral Psychotherapy and Research 2013, 2: 121-128 [JCBPR 2013; 2(2.000: 121-128

  10. Muonic X-ray intensities in phosphorus- and selenium modifications

    International Nuclear Information System (INIS)

    Kaeser, K.; Robert-Tissot, B.; Schaller, L.A.; Schellenberg, L.; Schneuwly, H.

    1979-01-01

    Muonic X-ray intensity measurements have been performed at SIN on allotropic modifications of phosphorus (white, red and black) and of selenium (red and black). Structure effects have been found in the intensity ratios of the K-series between amorphous and crystalline modifications of the same element. The effect in the higher series (Se) is less pronounced. On the other hand, the two crystalline phosphorus modifications (red and black) show the same intensity behavior. The root-mean-square radii 2 >sup(1/2) of phosphorus and (natural) selenium were found to be 3.187(3) fm and 4.138(1) fm respectively. (Auth.)

  11. Protein covalent modification by biologically active quinones

    Directory of Open Access Journals (Sweden)

    MIROSLAV J. GASIC

    2004-11-01

    Full Text Available The avarone/avarol quinone/hydroquinone couple shows considerable antitumor activity. In this work, covalent modification of b-lactoglobulin by avarone and its derivatives as well as by the synthetic steroidal quinone 2,5(10-estradiene-1,4,17-trione and its derivatives were studied. The techniques for studying chemical modification of b-lactoglobulin by quinones were: UV/Vis spectrophotometry, SDS PAGE and isoelectrofocusing. SDS PAGE results suggest that polymerization of the protein occurs. It could be seen that the protein of 18 kD gives the bands of 20 kD, 36 kD, 40 kD, 45 kD, 64 kD and 128 kD depending on modification agent. The shift of the pI of the protein (5.4 upon modification toward lower values (from pI 5.0 to 5.3 indicated that lysine amino groups are the principal site of the reaction of b-lactoglobulin with the quinones.

  12. Enzymatic Modification of Sphingomyelin

    DEFF Research Database (Denmark)

    Due to its major role in maintaining the water-retaining properties of the epidermis, ceramide is of great commercial potential in cosmetic and pharmaceuticals such as hair and skin care products. Currently, chemical synthesis of ceramide is a costly process, and developments of alternative cost......-efficient, high yield production methods are of great interest. In the present study, the potential of producing ceramide through the enzymatic hydrolysis of sphingomyelin have been studied. sphingomyelin is a ubiquitous membrane-lipid and rich in dairy products or by-products. It has been verified...... that sphingomyelin modification gives a feasible approach to the potential production of ceramide. The reaction system has been improved through system evaluation and the optimization of several important factors, and phospholipase C from Clostridium perfringens shows higher activity towards the hydrolysis reaction...

  13. Preparation of RF-(VM-SiO2n-RF/AM-Cellu Nanocomposites, and Use Thereof for the Modification of Glass and Filter Paper Surfaces: Creation of a Glass Thermoresponsive Switching Behavior and an Efficient Separation Paper Membrane

    Directory of Open Access Journals (Sweden)

    Hideo Sawada

    2017-03-01

    Full Text Available Fluoroalkyl end-capped vinyltrimethoxysilane oligomeric silica/alkyl-modified cellulose (AM-Cellu nanocomposites [RF-(CH2-CHSiO2n-RF/AM-Cellu; n = 2, 3; RF = CF(CF3OC3F7] were prepared by the sol-gel reactions of the corresponding oligomer [RF-(CH2-CHSi(OMe3n-RF] in the presence of AM-Cellu. The nanocomposites thus obtained were applied to the surface modification of glass to exhibit a highly oleophobic/superhydrophilic characteristic on the modified surface at 20 °C. Interestingly, a temperature dependence of contact angle values of dodecane and water was observed on the modified surface at 20~70 °C, and the dodecane contact angle values were found to decrease with increasing the temperatures from 20 to 70 °C to provide from highly oleophobic to superoleophilic characteristics on the surface. On the other hand, the increase of the water contact angle values was observed with the increase in the temperatures under similar conditions to supply superhydrophilic to superhydrophobic characteristics on the modified surface. The corresponding nanocomposites were also applied to the surface modification of the filter paper under similar conditions to afford a superoleophilic/superhydrophobic characteristic on the surface. It was demonstrated that the modified filter paper is effective for the separation membrane for W/O emulsion to isolate the transparent colorless oil.

  14. Effects of aluminium surface morphology and chemical modification on wettability

    DEFF Research Database (Denmark)

    Rahimi, Maral; Fojan, Peter; Gurevich, Leonid

    2014-01-01

    -life aluminium surfaces of different morphology: unpolished aluminium, polished aluminium, and aluminium foil, were subjected to surface modification procedures which involved the formation of a layer of hydrophilic hyperbranched polyethyleneglycol via in situ polymerization, molecular vapour deposition...... of a monolayer of fluorinated silane, and a combination of those. The effect of these surface modification techniques on roughness and wettability of the aluminium surfaces was elucidated by ellipsometry, contact angle measurements and atomic force microscopy. We demonstrated that by employing different types...

  15. Modification of semiconductors with proton beams. A review

    International Nuclear Information System (INIS)

    Kozlovskii, V.V.; Lomasov, V.N.; Kozlov, V.A.

    2000-01-01

    Analysis is given of the progress in the modification of semiconductors by proton beams in fields such as proton-enhanced diffusion, ion-beam mixing, and formation of porous layers. This method of modification (doping) is shown to have high potential in monitoring the properties of semiconductor materials and designing devices of micro and nano electronics as compared to the conventional doping techniques such as thermal diffusion, epitaxy, and ion implantation

  16. Modifications to the NRAD reactor (1977 to present)

    International Nuclear Information System (INIS)

    Weeks, A.A.; Pruett, D.P.; Heidel, C.C.

    1986-01-01

    The NRAD facility utilizes a 250-kW TRIGA reactor and is completely dedicated to neutron radiography and the development of radiography techniques. Criticality was first achieved at the NRAD reactor in October 1977. Since that time, a number of modifications have been implemented to improve operational efficiency and radiography production. The modifications to the NRAD reactor are categorized as either 'operational improvements', which have increased operational efficiency and reliability, or as 'production improvements', which have reduced the number of unscheduled shutdowns due to instrument malfunctions or mechanical failures. A brief synopsis of the significant reactor modifications in both categories is presented

  17. Genetic modification and genetic determinism

    Directory of Open Access Journals (Sweden)

    Vorhaus Daniel B

    2006-06-01

    Full Text Available Abstract In this article we examine four objections to the genetic modification of human beings: the freedom argument, the giftedness argument, the authenticity argument, and the uniqueness argument. We then demonstrate that each of these arguments against genetic modification assumes a strong version of genetic determinism. Since these strong deterministic assumptions are false, the arguments against genetic modification, which assume and depend upon these assumptions, are therefore unsound. Serious discussion of the morality of genetic modification, and the development of sound science policy, should be driven by arguments that address the actual consequences of genetic modification for individuals and society, not by ones propped up by false or misleading biological assumptions.

  18. Evaluation of Techniques for Reducing In-Use Automotive Fuel Consumption

    Science.gov (United States)

    1981-04-01

    This report presents an assessment of proposed techniques for reducing fuel consumption in the in-use light duty road vehicle fleet. Three general classes of techniques are treated: (1) modification of vehicles, (2) modification of traffic flow, and ...

  19. A REVIEW ON MODIFICATION OF ANALYTICAL TECHNIQUES IN HERBAL RESEARCH

    OpenAIRE

    Rathod Shobhen; Patel N.M; Patel P.M

    2011-01-01

    As the demand and commercial value of the Herbal Medicines is increasing tremendously, assurance of safety, quality and efficacy of medicinal plants and herbal products is becoming a crucial issue. The need of the hour is to develop a systematic approach and well-designed methodologies for the standardization of herbal raw materials and herbal formulations. Standardization methods should take into consideration all aspects contributing to the quality of the herbal drugs. Herbal Medicines are ...

  20. Modification of natural leather by grafting emulsion copolymerization technique

    International Nuclear Information System (INIS)

    Badran, A.S.; Nasr, H.E.; El-Halawany, N.R.; Mohamed, W.S.

    2005-01-01

    Grafting emulsion copolymerization of methyl methacrylate (MMA) with butyl acrylate of different molar ratios onto natural leather with different molar ratios was carried out using developed redox initiation system of potassium persulphate (PPS) as an oxidizing agent and some sodium bisulphite adducts as reducing agent, as well as sodium dodecyl sulphate (SDS) was used as an anionic emulsifier. The grafted leather was characterized via FTIR, SEM and thermal gravimetric analysis. Moreover, the grafted leather was evaluated through water absorption, tensile strength, dyeing performance and hardness measurements. The obtained results revealed that the physical and mechanical properties of the modified leather were enhanced