WorldWideScience

Sample records for bed sore problem

  1. An Intelligent FPGA Based Anti-Sweating System for Bed Sore Prevention in a Clinical Environment

    Directory of Open Access Journals (Sweden)

    K. S. Jaichandar

    2011-01-01

    Full Text Available Bed sores, a common problem among immobile patients occur as a result of continuous sweating due to increase in skin to bed surface temperature in patients lying on same posture for prolonged period. If left untreated, the skin can break open and become infected. Currently adopted methods for bed sores prevention include: use of two hourly flip chat for repositioning patient or use of air fluidized beds. However, the setbacks of these preventive measures include either use of costly equipment or wastage of human resources. This paper introduces an intelligent low cost FPGA based anti-sweating system for bed sores prevention in a clinical environment. The developed system consists of bed surface implanted temperature sensors interfaced with an FPGA chip for sensing the temperature change in patient’s skin to bed surface. Based on the temperature change, the FPGA chip select the - mode (heater/cooler and speed of the fan module. Furthermore, an alarm module was implemented to alert the nurse to reposition the patient only if patient’s skin to bed surface temperature exceeds a predefined threshold thereby saving human resources. By integrating the whole system into a single FPGA chip, we were able to build a low cost compact system without sacrificing processing power and flexibility.

  2. [Skin care and prevention of bed sores in bedridden patients].

    Science.gov (United States)

    Martínez Cuervo, Fernando; Soldevilla Agreda, J Javier; Verdú Soriano, José; Segovia Gómez, Teresa; García Fernández, Francisco Pedro; Pancorbo Hidalgo, Pedro Luís

    2007-12-01

    The aging process and environmental aggressions will leave their imprints on the state of a person's skin, possibly compromising some of its functions. Age is a risk factor for the development of bed sores, but not the only factor nor the most important one; therefore, we need to develop prevention programs directed to all patients who spend long periods of time sedentary or bedridden. Prevention programs for bed sores must be based on the best evidence available and include a risk evaluation on these factors: suffering a lesion due to pressure, specific skin treatment, incontinence control, excessive humidity posture changes and the use of special surfaces to manage pressure during an increase in mobility or activity by the patient, local pressure reducing devices as well as paying attention to special situations. All of these care measures have to be developed based on a continuity of treatment among the institutions and caretakers involved with treating each patient.

  3. Pressure sores--a constant problem for plegic patients and a permanent challenge for plastic surgery.

    Science.gov (United States)

    Giuglea, Carmen; Marinescu, Sllviu; Florescu, Ioan Petre; Jecan, Crenguta

    2010-01-01

    Pressure sores can be defined as lesions caused by unrelieved pressure resulting in damage of the underlying tissue. They represent a common problem in the pathology of plegic patients and, plastic surgery has a significant role in their treatment. Pressure sores occur over bony prominences and so, they are most commonly seen at the sacrum and trochanters in paralyzed patients and at ischium for the patients who sit in a wheelchair for a long time. For these patients, surgical treatment is very important because on one hand, it stops the loss of nutrients and proteins at the site of the pressure sore, and on the other hand, it permits the initiation of neuromuscular recuperation treatment much faster.

  4. [Sacral pressure sores and their treatment].

    Science.gov (United States)

    Bielecki, Marek; Skowroński, Rafał; Skowroński, Jan

    2006-01-01

    Sacral bed sores still present a serious problem in most surgery departments. They occur mainly in elderly patients of limited mobility. The treatment of such sores extends over long periods of time and therefore involves considerable costs. The material consisted of 11 sacral pressure ulcers treated surgically. The sores occurred in 4 severely disabled patients suffering from proximal third femur fractures, 4 patients with traumatic brain injury (treated in the Intensive Care Unit), and 3 patients suffering from bed sores after spinal cord injury. In 6 patients a fasciocutaneous flap was applied to the sores and in 5 cases a pedicled musculocutaneous gluteus maximus flap. The end results were assessed using Seiler's criteria. Complications of the "seroma" type were observed in 3 patients, and in 2 marginal necrosis. In all our patients complete healing was achieved within 2-4 weeks. On analysing our experience to date in surgical treatment of bed sores we are of the opinion that even extensive sacral sores can be covered with unilateral pedicled flaps provided that they are appropriately planned. Deep sores of the 4th degree sometimes with concomitant osteomyelitis require pedicled muscle flaps or in some cases musculocutaneous flaps to improve local circulation. The preparation of the patient for reconstruction surgery is just as important as the operation itself and therefore such preparation should never be neglected.

  5. Pressure Sores

    Science.gov (United States)

    Pressure sores are areas of damaged skin caused by staying in one position for too long. They commonly ... wheelchair, or are unable to change your position. Pressure sores can cause serious infections, some of which are ...

  6. Canker sore

    Science.gov (United States)

    ... under one third inch or 1 centimeter across) Gray color as healing starts Less common symptoms include: ... Aphthous ulcer; Ulcer - aphthous Images Canker sore Mouth anatomy Canker sore (aphthous ulcer) Fever blister References Bope ...

  7. Mouth sores

    Science.gov (United States)

    ... To help cold sores or fever blisters, you can also apply ice to the sore. You may reduce your chance of getting common mouth sores by: Avoiding very hot foods or beverages Reducing stress and practicing relaxation techniques like yoga or meditation ...

  8. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... cushion? play_arrow What’s important to know about positioning in bed to prevent pressure sores? play_arrow ... Disabilities Photography by Rona Talcott Website by Mobile Marketing LLC Understanding Spinal Cord Injury About Us Expert ...

  9. Canker Sores

    Science.gov (United States)

    ... mouth that move, such as the tongue, soft palate, cheeks, and lips. This condition is recurrent because ... week. Most of the time, canker sores are self-limiting. This means that they will go away ...

  10. Sore Throat

    Science.gov (United States)

    ... as those that cause colds, the flu, and mononucleosis) can lead to a sore throat. Bacteria (such ... to the valves of the heart. What is mononucleosis? Mononucleosis (mono) is a viral infection caused by ...

  11. Cold Sore

    Science.gov (United States)

    ... may reduce how often they return. Symptoms A cold sore usually passes through several stages: Tingling and itching. Many people feel an itching, burning or tingling sensation around their lips for a day or so ...

  12. Soreness during non-music activities is associated with playing-related musculoskeletal problems: an observational study of 731 child and adolescent instrumentalists

    Directory of Open Access Journals (Sweden)

    Sonia Ranelli

    2014-06-01

    Full Text Available Question: Is exposure to non-music-related activities associated with playing-related musculoskeletal problems in young instrumentalists? Is non-music-activity-related soreness associated with playing-related musculoskeletal problems in this group of instrumentalists? Design: Observational study using a questionnaire and physical measures. Participants: 859 instrumentalists aged 7 to 17 years from the School of Instrumental Music program. Results: Of the 731 respondents who completed the questionnaire adequately, 412 (56% experienced instrument-playing problems; 219 (30% had symptoms severe enough to interfere with normal playing. Children commonly reported moderate exposure to non-music-related activities, such as watching television (61%, vigorous physical activity (57%, writing (51% and computer use (45%. Greater exposure to any non-music activity was not associated with playing problems, with odds ratios ranging from 1.01 (95% CI 0.7 to 1.5 for watching television to 2.08 (95% CI 0.5 to 3.3 for intensive hand activities. Four hundred and seventy eight (65% children reported soreness related to non-music activities, such as vigorous physical activity (52%, writing (40%, computer use (28%, intensive hand activities (22%, electronic game use (17% and watching television (15%. Non-music-activity-related soreness was significantly associated with instrument playing problems, adjusting for gender and age, with odds ratios ranging from 2.6 (95% CI 1.7 to 3.9 for soreness whilst watching television, to 4.3 (95% CI 2.6 to 7.1 for soreness during intensive hand activities. Conclusion: Non-music-activity-related soreness co-occurs significantly with playing problems in young instrumentalists. The finding of significant co-occurrence of music and non-music-related soreness in respondents in this study suggests that intervention targets for young instrumentalists could include risk factors previously identified in the general child and adolescent

  13. Canker Sores

    Science.gov (United States)

    ... lack of vitamins and minerals, hormonal changes or menstrual periods. In some cases the cause is unknown. In most cases, the sores go away by themselves. Some ointments, creams or rinses may help with the pain. Avoiding hot, spicy food while you have a ...

  14. Soreness during non-music activities is associated with playing-related musculoskeletal problems: an observational study of 731 child and adolescent instrumentalists.

    Science.gov (United States)

    Ranelli, Sonia; Straker, Leon; Smith, Anne

    2014-06-01

    Is exposure to non-music-related activities associated with playing-related musculoskeletal problems in young instrumentalists? Is non-music-activity-related soreness associated with playing-related musculoskeletal problems in this group of instrumentalists? Observational study using a questionnaire and physical measures. 859 instrumentalists aged 7 to 17 years from the School of Instrumental Music program. Of the 731 respondents who completed the questionnaire adequately, 412 (56%) experienced instrument-playing problems; 219 (30%) had symptoms severe enough to interfere with normal playing. Children commonly reported moderate exposure to non-music-related activities, such as watching television (61%), vigorous physical activity (57%), writing (51%) and computer use (45%). Greater exposure to any non-music activity was not associated with playing problems, with odds ratios ranging from 1.01 (95% CI 0.7 to 1.5) for watching television to 2.08 (95% CI 0.5 to 3.3) for intensive hand activities. Four hundred and seventy eight (65%) children reported soreness related to non-music activities, such as vigorous physical activity (52%), writing (40%), computer use (28%), intensive hand activities (22%), electronic game use (17%) and watching television (15%). Non-music-activity-related soreness was significantly associated with instrument playing problems, adjusting for gender and age, with odds ratios ranging from 2.6 (95% CI 1.7 to 3.9) for soreness whilst watching television, to 4.3 (95% CI 2.6 to 7.1) for soreness during intensive hand activities. Non-music-activity-related soreness co-occurs significantly with playing problems in young instrumentalists. The finding of significant co-occurrence of music and non-music-related soreness in respondents in this study suggests that intervention targets for young instrumentalists could include risk factors previously identified in the general child and adolescent population, as well as music-specific risk factors. This is an

  15. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... play_arrow What is "sepsis," and why is it dangerous? play_arrow How common are pressure sores ... likely to develop pressure sores? play_arrow Is it true that a pressure sore can develop in ...

  16. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... of a pressure sore required? play_arrow How long is the typical healing time for a pressure ... arrow Why do some pressure sores take so long to heal? play_arrow Can a pressure sore ...

  17. Pressure Sore at an Unusual Site- the Bilateral Popliteal Fossa: A Case report

    Directory of Open Access Journals (Sweden)

    Kamal Kataria

    2012-05-01

    Full Text Available Pressure sore is tissue ulceration due to unrelieved pressure, altered sensory perception, and exposure to moisture. Geriatric patients with organic problems and patients with spinal cord injuries are the high-risk groups. Soft tissues over bony prominences are the common sites for ulcer development. About 95% of pressure ulcers occur in the lower part of the body. Ischial tuberosity, greater trochanter, sacrum and heel are common sites. In addition to these, pressure sores at unusual sites like nasal alae, malar eminences, cervical region and medial side of knee have also been described. Only 1.6% of the patients present with sores in areas outside the pelvis and lower extremity. In a paraplegic patient, pressure sores are usually over extensor surface of knee and heel but pressure ulcer over popliteal fossa are extremely rare. We herein report a case of a 36-years-old diabetic and paraplegic male, who presented with multiple bed sores involving the sacral area, heels and bilateral popliteal fossa. Popliteal fossa is an unusual site for pressure sores. Only one similar case has been previously reported in the literature.

  18. Pressure Sore at an Unusual Site- the Bilateral Popliteal Fossa: A Case report

    Science.gov (United States)

    Kataria, Kamal; Sagar, Sushma; Singhal, Manish; Yadav, Rajni

    2012-01-01

    Pressure sore is tissue ulceration due to unrelieved pressure, altered sensory perception, and exposure to moisture. Geriatric patients with organic problems and patients with spinal cord injuries are the high-risk groups. Soft tissues over bony prominences are the common sites for ulcer development. About 95% of pressure ulcers occur in the lower part of the body. Ischial tuberosity, greater trochanter, sacrum and heel are common sites. In addition to these, pressure sores at unusual sites like nasal alae, malar eminences, cervical region and medial side of knee have also been described. Only 1.6% of the patients present with sores in areas outside the pelvis and lower extremity. In a paraplegic patient, pressure sores are usually over extensor surface of knee and heel but pressure ulcer over popliteal fossa are extremely rare. We herein report a case of a 36-years-old diabetic and paraplegic male, who presented with multiple bed sores involving the sacral area, heels and bilateral popliteal fossa. Popliteal fossa is an unusual site for pressure sores. Only one similar case has been previously reported in the literature. PMID:29181131

  19. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores ... sores? What is a Spinal Cord Injury? SCI Medical Experts People Living With SCI Personal Experiences By ...

  20. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing Pressure Sores Mary Zeigler, MS Transition from Hospital to Home ...

  1. Preventing Pressure Sores

    Science.gov (United States)

    ... and how can it be increased? play_arrow What do family members and caregivers need to know about pressure sores? play_arrow What do family members and caregivers need to do to prevent pressure sores? play_ ...

  2. Pharyngitis - sore throat

    Science.gov (United States)

    ... A streptococcus. Less commonly, bacterial diseases such as gonorrhea and chlamydia can cause sore throat. Most cases ... physical exam alone. A culture for chlamydia or gonorrhea is positive. Sore throat caused by the flu ( ...

  3. Genital sores - male

    Science.gov (United States)

    Sores - male genitals; Ulcers - male genitals ... A common cause of male genital sores are infections that are spread through sexual contact, such as: Genital herpes (small, painful blisters filled with clear ...

  4. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... play_arrow What do family members and caregivers need to know about pressure sores? play_arrow What do family members and caregivers need to do to prevent pressure sores? play_arrow ...

  5. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... increased? play_arrow What do family members and caregivers need to know about pressure sores? play_arrow What do family members and caregivers need to do to prevent pressure sores? play_ ...

  6. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... especially prone to pressure sores? play_arrow What parts of the body are most likely to develop ... play_arrow How long is the typical healing time for a pressure sore? play_arrow Why do ...

  7. Long-term outcome of using posterior-thigh fasciocutaneous flaps for the treatment of ischial pressure sores.

    Science.gov (United States)

    Lin, Haodong; Hou, Chunlin; Chen, Aimin; Xu, Zhen

    2010-08-01

    Among the many difficult problems presented by patients with spinal cord injuries, management of ischial pressure ulcers remains challenging for reconstructive surgeons. This study describes the long-term outcome of using posterior-thigh fasciocutaneous flaps for the treatment of ischial pressure sores. Between January 1999 and June 2003, 12 patients with ischial sores were enrolled in this study. All the patients underwent early aggressive surgical debridement followed by surgical reconstruction with a laterally based posterior-thigh fasciocutaneous flap. The follow-up period ranged from 24 months to 97 months (mean, 62 months). All the flaps survived, and there were no partial flap losses. Primary-wound healing occurred in all the cases. In two patients, Grade II ischial pressure sores recurred 24 months and 27 months after the operation. There was no recurrence in the other 10 patients. The posterior-thigh fasciocutaneous pedicled flap was a good method for treating ischial bed sores. This flap could be used to treat recurrences observed after primary bed-sore treatment with other methods. The flap was easy to raise, and it did not cause any donor-site morbidity. The long-term outcome of using posterior-thigh fasciocutaneous flaps for the treatment of ischial pressure sores was generally good. (c) Thieme Medical Publishers.

  8. Taking Care of Pressure Sores

    Science.gov (United States)

    ... Tract Infections: Indwelling (Foley) Catheter Taking Care of Pressure Sores [Download this pamphlet: "Taking Care of Pressure Sores" - ( ... may not show up right away. Stages of pressure sores and how to care for them: STAGE ONE ...

  9. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... cord injuries? play_arrow Why are pressure sores so serious? play_arrow What is "sepsis," and why ... pressure sores? play_arrow Why is pressure relief so important when sitting in a wheelchair? play_arrow ...

  10. ISCHIECTOMY FOR PRESSURE SORES

    Science.gov (United States)

    Stern, Mark; Cozen, Lewis; Aldes, John

    1960-01-01

    Ischiectomy with primary closure was carried out in five paraplegic patients with pressure sores. This operation, less extensive than the wide excision with full thickness graft that is now widely advocated, was successful in four of the five cases. In the fifth case none of the several attempts to heal the sores was in the least successful. PMID:18732351

  11. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... and how can it be increased? play_arrow What do family members and caregivers need to know about pressure sores? play_arrow What do family members and caregivers need to do to prevent pressure sores? play_ ...

  12. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... L Sarah Harrison, OT Anne Bryden, OT The Role of the Social Worker after Spinal Cord Injury ... do to prevent pressure sores? play_arrow What role does diet and hydration play in preventing pressure ...

  13. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... play_arrow What parts of the body are most likely to develop pressure sores? play_arrow Is ... daily skin inspections? play_arrow What are the most important things for someone with a spinal cord ...

  14. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Sores Mary Zeigler, MS Transition from Hospital to Home Kim Eberhardt Muir, MS ... medical advice, recommend or endorse health care products or services, or control the information found on external websites. ...

  15. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Sores Mary Zeigler, MS Transition from Hospital to Home Kim Eberhardt Muir, MS Coping with a New ... not provide medical advice, recommend or endorse health care products or services, or control the information found ...

  16. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... hours? play_arrow What's the best way to do daily skin inspections? play_arrow What are the ... for someone with a spinal cord injury to do to prevent pressure sores? play_arrow Why is ...

  17. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Medical Experts People Living with SCI Personal Experiences by Topic Resources Peer Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David ...

  18. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing Pressure Sores Mary Zeigler, MS Transition from ... Rosenberg, PsyD Understanding SCI Rehabilitation Donald Peck Leslie, MD Adjusting to Social Life in a Wheelchair Lisa ...

  19. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Living with SCI Personal Experiences by Topic Resources Peer Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David ...

  20. Antibiotics for sore throat.

    Science.gov (United States)

    Spinks, Anneliese; Glasziou, Paul P; Del Mar, Chris B

    2013-11-05

    Sore throat is a common reason for people to present for medical care. Although it remits spontaneously, primary care doctors commonly prescribe antibiotics for it. To assess the benefits of antibiotics for sore throat for patients in primary care settings. We searched CENTRAL 2013, Issue 6, MEDLINE (January 1966 to July week 1, 2013) and EMBASE (January 1990 to July 2013). Randomised controlled trials (RCTs) or quasi-RCTs of antibiotics versus control assessing typical sore throat symptoms or complications. Two review authors independently screened studies for inclusion and extracted data. We resolved differences in opinion by discussion. We contacted trial authors from three studies for additional information. We included 27 trials with 12,835 cases of sore throat. We did not identify any new trials in this 2013 update. 1. Symptoms Throat soreness and fever were reduced by about half by using antibiotics. The greatest difference was seen at day three. The number needed to treat to benefit (NNTB) to prevent one sore throat at day three was less than six; at week one it was 21. 2. Non-suppurative complications The trend was antibiotics protecting against acute glomerulonephritis but there were too few cases to be sure. Several studies found antibiotics reduced acute rheumatic fever by more than two-thirds within one month (risk ratio (RR) 0.27; 95% confidence interval (CI) 0.12 to 0.60). 3. Suppurative complications Antibiotics reduced the incidence of acute otitis media within 14 days (RR 0.30; 95% CI 0.15 to 0.58); acute sinusitis within 14 days (RR 0.48; 95% CI 0.08 to 2.76); and quinsy within two months (RR 0.15; 95% CI 0.05 to 0.47) compared to those taking placebo. 4. Subgroup analyses of symptom reduction Antibiotics were more effective against symptoms at day three (RR 0.58; 95% CI 0.48 to 0.71) if throat swabs were positive for Streptococcus, compared to RR 0.78; 95% CI 0.63 to 0.97 if negative. Similarly at week one the RR was 0.29 (95% CI 0.12 to 0

  1. Herpes Simplex Virus (Cold Sores)

    Science.gov (United States)

    ... Print Share Cold Sores in Children: About the Herpes Simplex Virus Page Content ​A child's toddler and ... Cold sores (also called fever blisters or oral herpes) start as small blisters that form around the ...

  2. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... arrow What's the best way to do daily skin inspections? play_arrow What are the most important ... to prevent pressure sores? play_arrow What is “skin tolerance” and how can it be increased? play_ ...

  3. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... the most important thing to do to prevent pressure sores? What is a Spinal Cord Injury? SCI Medical Experts People Living With SCI Personal Experiences By Topic Resources Blog Peer Counseling About Media Donate Contact Us Terms of ...

  4. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... arrow Is it true that a pressure sore can develop in a few hours? play_arrow What's ... play_arrow What is “skin tolerance” and how can it be increased? play_arrow What do family ...

  5. Osteomyelitis beneath pressure sores

    International Nuclear Information System (INIS)

    Sugarman, B.; Hawes, S.; Musher, D.M.; Klima, M.; Young, E.J.; Pircher, F.

    1983-01-01

    Twenty-eight pressure sores were evaluated prospectively. Osteomyelitis was reported histologically in nine of 28 bones and pressure-related changes were reported in 14 bones. Roentgenograms suggested the presence of osteomyelitis in four instances of histologically proved osteomyelitis. Technetium Tc 99m medronate bone scans were highly sensitive, showing increased uptake in all cases of osteomyelitis; however, increased uptake also occurred commonly in uninfected bones due to pressure-related changes or other noninfectious causes. Cultures of bone biopsy samples usually disclosed anaerobic bacteria, gram-negative bacilli, or both. The diagnosis of osteomyelitis must be considered if a pressure sore does not respond to local therapy. If the technetium Tc 99m medronate uptake is increased in the involved area, or roentgenographic findings are abnormal, the diagnosis can only be made with certainty by histologic examination of bone. Antibacterial treatment should be selected based on the results of bone culture

  6. [Prevalence of pressure sores in a university hospital in 2003].

    Science.gov (United States)

    Daideri, G; Berthier, F; Brocker, P; Darmon, M-J; Mignolet, F; Quaranta, J-F; Staccini, P

    2006-12-01

    To determine the prevalence of pressure sores in a university hospital and to assess the risk of developing a pressure sore. A one-day survey was performed in all hospitalized patients, day hospital excepted. The Garches scale was used to assess the severity of pressure sores and the Braden scale was used to measure the patient's risk for the development of pressure ulcers. One thousand six hundred and eleven patients were included, mean age was 62+/-23 years and 53.3% were over 65 years old. In hospitalized patients, 64% were in acute care, 29% in intermediate medicine and long-term care and 7% in intensive care units. We have found 675 pressure sores in 268 patients, mean age of 76 years; 263 decubitus ulcers were acquired during hospitalization. The most frequent sites were heels (46%) and sacrum (26%). Stage 1 pressure ulcers showed 33% of the total. The total prevalence was 16.6%, 95% CI (14.9-18.6), the hospital acquired pressure sores prevalence was 7.5%, all stages included. A Braden score less than or equal to 15 was found in 29.1% of hospitalized patients. Standard mattresses were used in 37% of patients with pressure sores. Multivariate analysis showed that age and a Braden score less than or equal to 15 were significantly associated with pressure sores. Pressure sores are still an important problem in hospital; occurrence must be considered as an iatrogenic event and management requires a multidisciplinary approach.

  7. Glaciation of Siberia and the problem of massive ice beddings

    Directory of Open Access Journals (Sweden)

    V. S. Sheinkman

    2017-01-01

    Full Text Available As a result of many years of the author’s studies of glaciers and ground ices, a great amount of factual material has been collected for a purpose to analyze a possibility of burying the glaciers in the permafrost zone and to esti‑ mate a time of their stay in such а condition. According to the author’s opinion, the Siberian glaciers were mainly the valley ones; ice sheets were never formed, and any existence of buried glaciers could not be real in the geo‑ logical time scale. However, some researchers still believe that in the Quaternary ice sheets occurred in the North of Siberia, and, in addition, they consider the local massive ice beddings as relics of these sheets. No clear expla‑ nation of the similar origin of such ice structures exists at the present time, so development and variety of this ice could be easier explained by the permafrost genesis. Basing on results of observations carried out in all glacier regions of Siberia, the author concludes that glaciers cannot exist in the form of buried ice for a long time. This is unrealistic even in the North‑East of Siberia, where the absolute minimum temperature is −67.8 °C, and the mean annual air temperature drops below −17 °C. The characteristic feature of the Siberia continental climate is short, but hot summer. In such a situation, the coarse fragmental morainic material, covering glaciers by the layer up to 3 m thick, cannot preserve the underlying ice from melting because the heat penetrates down with the air, liquid precipitation, and the melt water. When glaciers reduce, the dead ice, buried under a moraine, may be preserved in the coldest areas of Siberia for only 100–150 years. Therefore, despite the resemblance of the scarps of the ice bodies having the permafrost or glacial origin, consideration of them as relics of ancient glaciers would be wrong.

  8. Reduction of the incidence of pressure sores by an education program on nursing care.

    Science.gov (United States)

    Srisupan, Vijitr; Senaratana, Wilawan; Picheansatian, Wilawan; Chittreecheur, Jittaporn; Watanakool, Malinee; Chaisri, Pratin; Singhakumfu, Laddawan; Tribuddharat, Chanwit; Danchaivijitr, Somwang

    2005-12-01

    To determine whether an education and campaign program would reduce the incidence of pressure sores. The study was performed in a 1,400-bed teaching hospital in Thailand with a total number of 697patients from 47 wards for a point prevalence study; 1,201 and 1,268 patients from 12 wards to determine whether reduction of pressure sore occurrence would be obtained by an education program. The point prevalence of pressure sores was 10.8%. The significant risk factors were age older than 60 years, fecal incontinence, and history of diarrhea. The occurrence of pressure sores was significantly reduced after the educational program from 9.91% to 5. 76%. The education on patient care aiming at reduction of the occurrence of pressure sores could be adopted nation-wide in order to reduce the morbidity, mortality and expenses. The education program was effective in reducing the incidence of pressure sores.

  9. How to care for pressure sores

    Science.gov (United States)

    ... ency/patientinstructions/000740.htm How to care for pressure sores To use the sharing features on this page, ... Shoulders Back Back of head Caring for a Pressure Sore Stage I or II sores will heal if ...

  10. The effect of Dry Bed Training on behavioural problems in enuretic children

    NARCIS (Netherlands)

    Hira Sing, R.A.; van Leerdam, F.J.M.; Bolk-Bennink, L.F.; Koot, H.M.

    2002-01-01

    Children with nocturnal enuresis (n = 91) selected by school doctors in the Netherlands from 1991 to 1994 were included in a study to assess the course of behavioural problems especially when the children became dry after the Dry Bed Training (DBT) programme. The Child Behaviour Checklist (CBCL)

  11. Does a foamy-block mattress system prevent pressure sores ? A prospective randomised clinical trial in 1729 patients.

    Science.gov (United States)

    Berthe, J V; Bustillo, A; Mélot, C; de Fontaine, S

    2007-01-01

    Pressure ulcers are a frequent complication of bed rest. The development of an efficient and low cost pressure relieving system for the prevention of bed-sores would be of considerable hospital health and economic interest. Our study was designed to determine the effectiveness in pressure-sore prevention of an interface pressure-decreasing mattress, the Kliniplot mattress, used in our institution since 1978. In a prospective randomised controlled 7-month clinical trial we compared the Kliniplot mattress with our standard hospital mattress in 1729 patients admitted to medical and surgical departments (neurology, cardiology, oncology-haematology, neurosurgery, thoracic surgery and orthopaedic surgery). Two groups (Klinipot mattress and standard hospital mattress) were monitored for the prevention of pressure sores. The patients were evaluated on a daily basis from their admission until the eventual occurrence of a bed-sore. Patients' characteristics and pressure-sore risk factors were similar at the baseline in both groups. Patients presenting with a pressure sore at the time of admission were excluded. Forty-two of the 1729 patients (2.4%) who entered the study developed at least one pressure sore. Twenty-one of the 657 patients (3.2%) nursed on the Kliniplot mattress, and 21 of the 1072 patients (1.9%) on the standard mattress developed bed-sores (p = 0.154). The median time for the occurrence of pressure sores was 31 days (range 6-87) with the Kliniplot mattress and 18 days (range 2 to 38) with the standard mattress (p sores using the modified Ek's scale were no different at the baseline between both groups (p = 0.764). The severity of the pressure sores was no different between both groups (p = 0.918). Our results show that the occurrence of pressure sores is not reduced but is delayed when patients are nursed on a Kliniplot pressure-decreasing mattress.

  12. Pressure sores and hip fractures.

    Science.gov (United States)

    Haleem, S; Heinert, G; Parker, M J

    2008-02-01

    Development of pressure sores during hospital admission causes morbidity and distress to the patient, increases strain on nursing resources, delaying discharge and possibly increasing mortality. A hip fracture in elderly patients is a known high-risk factor for development of pressure sores. We aimed to determine the current incidence of pressure sores and identify those factors which were associated with an increased risk of pressure sores. We retrospectively analysed prospectively collected data of 4654 consecutive patients admitted to a single unit. One hundred and seventy-eight (3.8%) of our patients developed pressure sores. Patient factors that increased the risk of pressure sores were increased age, diabetes mellitus, a lower mental test score, a lower mobility score, a higher ASA score, lower admission haemoglobin and an intra-operative drop in blood pressure. The risk was higher in patients with an extracapsular neck of femur fracture and patients with an increased time interval between admission to hospital and surgery. Our studies indicate that while co-morbidities constitute a substantial risk in an elderly population, the increase in incidence of pressure sores can be reduced by minimising delays to surgery.

  13. Sore Throat: Diagnosis and Treatment

    Science.gov (United States)

    ... neck to check for swollen glands (lymph nodes) Listening to your or your child's breathing with a ... of your sore throat, these at-home care strategies can help you ease your symptoms: Rest. And ...

  14. Two-dimensional lift-up problem for a rigid porous bed

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.; Huang, L. H.; Yang, F. P. Y. [Department of Civil Engineering, National Taiwan University, Taipei, Taiwan (China)

    2015-05-15

    The present study analytically reinvestigates the two-dimensional lift-up problem for a rigid porous bed that was studied by Mei, Yeung, and Liu [“Lifting of a large object from a porous seabed,” J. Fluid Mech. 152, 203 (1985)]. Mei, Yeung, and Liu proposed a model that treats the bed as a rigid porous medium and performed relevant experiments. In their model, they assumed the gap flow comes from the periphery of the gap, and there is a shear layer in the porous medium; the flow in the gap is described by adhesion approximation [D. J. Acheson, Elementary Fluid Dynamics (Clarendon, Oxford, 1990), pp. 243-245.] and the pore flow by Darcy’s law, and the slip-flow condition proposed by Beavers and Joseph [“Boundary conditions at a naturally permeable wall,” J. Fluid Mech. 30, 197 (1967)] is applied to the bed interface. In this problem, however, the gap flow initially mainly comes from the porous bed, and the shear layer may not exist. Although later the shear effect becomes important, the empirical slip-flow condition might not physically respond to the shear effect, and the existence of the vertical velocity affects the situation so greatly that the slip-flow condition might not be appropriate. In contrast, the present study proposes a more general model for the problem, applying Stokes flow to the gap, the Brinkman equation to the porous medium, and Song and Huang’s [“Laminar poroelastic media flow,” J. Eng. Mech. 126, 358 (2000)] complete interfacial conditions to the bed interface. The exact solution to the problem is found and fits Mei’s experiments well. The breakout phenomenon is examined for different soil beds, mechanics that cannot be illustrated by Mei’s model are revealed, and the theoretical breakout times obtained using Mei’s model and our model are compared. The results show that the proposed model is more compatible with physics and provides results that are more precise.

  15. [Program for lowering the incidence of pressure sores in neurosurgical patients].

    Science.gov (United States)

    Chang, Chau-Hui; Chen, Hui-Ling; Chen, Hsiang-Chi

    2007-12-01

    Pressure sores are one of the well known problems that occur in hospitals. As the literature on the subject indicates, a lot of money is expended in managing this problem every year, and 12-66% of pressure sores are caused during surgery. Patients who undergo neurosurgical procedures are susceptible to pressure sores because of lengthy operations. We collected data on patients with pressure sores who underwent surgery between May 2004 and August 2004, and found that the incidence of pressure sore in neurosurgical patients was 9.5%, which was the highest among all surgical patients. This project was developed to solve the problem of pressure sores by setting up standard preventive procedures, a nursing follow up system and continuing education courses, and utilizing cotton rolls to pad sites of pressure sores. The incidence of pressure sore in neurosurgical patients was reduced from 9.5% to 7% after the improvement project was carried out. The more concerned nurses are about pressure sores, the better the quality of operative nursing care.

  16. On the Problem of Filtration to an Imperfect Gallery in a Pressureless Bed

    Science.gov (United States)

    Bereslavskii, É. N.; Dudina, L. M.

    2018-01-01

    The problem of plane steady-state filtration in a pressureless bed to an imperfect gallery in the presence of evaporation from the flow free surface is considered. To study such type of flow, a mixed boundary-value problem of the theory of analytical functions is formulated and solved with application of the Polubarinova-Kochina method. Based on the model suggested, an algorithm for computing the discharge of the gallery and the ordinate of free surface emergence to the impermeable screen is developed. A detailed hydrodynamic analysis of the influence of all physical parameters of the model on the desired filtration characteristics is given.

  17. Production of polycrystalline silicon by fluidized-bed-problems and recent progress of study

    Energy Technology Data Exchange (ETDEWEB)

    Kojima, Toshinori

    1988-10-01

    Concerning the production of polycrystalline silicon from SiH/sub 4/ by applying fluidized bed reaction, recent progress of study, problems involved, and countermeasures to them were reported. For the experiment, stainless tube with 50mm inside diameter attached with electric heater on the wall as auxillary heat source was used to measure the temperature distribution in the bed. As the diluting gas, hydrogen and argon were used to investigate the effect of diluent gas and it was understood that sort of diluent gas affected on the crogging and reaction rate. It was indicated that, in the fluidized bed reaction which gave large depositing area and high productivity, contamination was easily occurred. Observation of fine powder by electronic-microscope revealed that different diluent caused the difference of fine powder shape and that the higher the reaction temperature the more fine powder was produced. Crogging condition was affected by tower diameter, together with temperature and fluidizing conditions. In addition, two recent patents were introduced. 11 references, 10 figures.

  18. Risk factors for pressure sores in adult patients with myelomeningocele – a questionnaire-based study

    Science.gov (United States)

    Plaum, Pål-Erik; Riemer, Gunnar; Frøslie, Kathrine Frey

    2006-01-01

    Background Myelomeningocele (MMC) is a part of a complex neural tube defect and a disorder of the cerebrospinal fluid system. Pressure sores are a frequent complication for patients with MMC. Little is known about the risk factors for pressure sores in adults with MMC. The aim of this study was to investigate an association between the presence of pressure sores and other patient characteristics, in order to develop an improved strategy for the management of sores. Methods A structured questionnaire regarding sores, medical condition, function and living factors was designed and sent to the 193 patients with MMC registered in the year 2003 at TRS, a National Centre for Rare Disorders in Norway. Results Out of 193 total, 87 patients participated and 71 patients (82%) reported sores; 26 (30%) at the time of the interview and 45 (52%) during the last 5 years. Sores were mostly localized on toes and feet and occurred exclusively in regions with reduced or missing sensibility. A significant association was found between sores and memory deficit (p = 0.02), Arnold Chiari malformation (p = 0.02) and a record of previous sores (p = 0.004). Sores were not significantly associated with hydrocephalus, syringomyelia, nutrition, body mass index, smoking, physical activity, employment or living together with other persons. Some patients (18, 21%) reported skin inspection by others and the remainder relied on self-inspection. Conclusion Patients with sensory deficit, memory problems, and Arnold Chiari malformation had a higher risk of having pressure sores. This patient group needs improved skin inspection routines and sore treatment. PMID:17196099

  19. Risk factors for pressure sores in adult patients with myelomeningocele--a questionnaire-based study.

    Science.gov (United States)

    Plaum, Pål-Erik; Riemer, Gunnar; Frøslie, Kathrine Frey

    2006-12-29

    Myelomeningocele (MMC) is a part of a complex neural tube defect and a disorder of the cerebrospinal fluid system. Pressure sores are a frequent complication for patients with MMC. Little is known about the risk factors for pressure sores in adults with MMC. The aim of this study was to investigate an association between the presence of pressure sores and other patient characteristics, in order to develop an improved strategy for the management of sores. A structured questionnaire regarding sores, medical condition, function and living factors was designed and sent to the 193 patients with MMC registered in the year 2003 at TRS, a National Centre for Rare Disorders in Norway. Out of 193 total, 87 patients participated and 71 patients (82%) reported sores; 26 (30%) at the time of the interview and 45 (52%) during the last 5 years. Sores were mostly localized on toes and feet and occurred exclusively in regions with reduced or missing sensibility. A significant association was found between sores and memory deficit (p = 0.02), Arnold Chiari malformation (p = 0.02) and a record of previous sores (p = 0.004). Sores were not significantly associated with hydrocephalus, syringomyelia, nutrition, body mass index, smoking, physical activity, employment or living together with other persons. Some patients (18, 21%) reported skin inspection by others and the remainder relied on self-inspection. Patients with sensory deficit, memory problems, and Arnold Chiari malformation had a higher risk of having pressure sores. This patient group needs improved skin inspection routines and sore treatment.

  20. Risk factors for pressure sores in adult patients with myelomeningocele – a questionnaire-based study

    Directory of Open Access Journals (Sweden)

    Frøslie Kathrine

    2006-12-01

    Full Text Available Abstract Background Myelomeningocele (MMC is a part of a complex neural tube defect and a disorder of the cerebrospinal fluid system. Pressure sores are a frequent complication for patients with MMC. Little is known about the risk factors for pressure sores in adults with MMC. The aim of this study was to investigate an association between the presence of pressure sores and other patient characteristics, in order to develop an improved strategy for the management of sores. Methods A structured questionnaire regarding sores, medical condition, function and living factors was designed and sent to the 193 patients with MMC registered in the year 2003 at TRS, a National Centre for Rare Disorders in Norway. Results Out of 193 total, 87 patients participated and 71 patients (82% reported sores; 26 (30% at the time of the interview and 45 (52% during the last 5 years. Sores were mostly localized on toes and feet and occurred exclusively in regions with reduced or missing sensibility. A significant association was found between sores and memory deficit (p = 0.02, Arnold Chiari malformation (p = 0.02 and a record of previous sores (p = 0.004. Sores were not significantly associated with hydrocephalus, syringomyelia, nutrition, body mass index, smoking, physical activity, employment or living together with other persons. Some patients (18, 21% reported skin inspection by others and the remainder relied on self-inspection. Conclusion Patients with sensory deficit, memory problems, and Arnold Chiari malformation had a higher risk of having pressure sores. This patient group needs improved skin inspection routines and sore treatment.

  1. Approximate solutions to the deep bed filtration problem; Solucoes aproximadas para o problema de deposicao profunda

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Julio M.; Marchesin, Dan [Instituto de Matematica Pura e Aplicada (IMPA), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The deep bed filtration problem is closely related to secondary oil recovery. In this work we derive explicit solutions to two filtration problems. The filtration function varies non-linearly with the Darcy speed and linearly with the deposition, but very little. The first solution is built by the method of perturbations and although it is only an approximation it is available in multiple symmetries, including the radial geometry used in the field. The main motivation is the validation of numerical methods. The second solution is exact but it is only available in the linear symmetry, i.e., laboratory geometry. We use it to verify the accuracy of the first solution, but it can also be used to simulate the deposition in experiments. (author)

  2. A Contribution to the Problem of Initiation of a Combustion Source in an Oil-Saturated Bed

    Science.gov (United States)

    Koznacheev, I. A.; Dobrego, K. V.

    2013-11-01

    The problem on in-situ self-ignition of an oil-saturated bed under the conditions of forced filtration of an oxygen-containing gas has been solved with analytical and numerical methods with account of the burnout of a deficient gas component. The influence of the burnout of this component and of convective removal of heat from the bed on the time of its self-ignition has been determined. Recommendations for the optimum regime of initiation of the self-ignition of the bed with account of variation of the blast flow rate and the oxygen content have been given.

  3. What role can nurse leaders play in reducing the incidence of pressure sores?

    Science.gov (United States)

    Wurster, Joan

    2007-01-01

    Pressure sores have plagued the nursing profession for many years as a major health care problem in terms of a patient's suffering and financial cost. Pressure sores are increasingly common in hospitalized patients in the United States with a 63% increase from 1993 to 2003. The nurse leader is accountable for the occurrence of pressure sores, a nurse-sensitive indicator, by a scorecard which is benchmarked against other facilities. The nurse leader must take a systematic approach in the prevention of pressure sores, with the strategy being consistent and motivating to the staff in order to improve patient outcome. The chief nursing officer, the unit manager, and the bedside nurse must all collaborate to prevent tissue injury in patients at risk for developing pressure sores and to promote wound healing in patients with existing breakdown.

  4. Practical Management of Pressure Sores

    Science.gov (United States)

    Jordan, John M.

    1992-01-01

    Pressure sores are common in the debilitated elderly. Causal factors are unrelieved pressure, shearing forces, friction, and moisture. Preventive measures should be used for all high-risk patients, defined by general condition, mental status, degree of incontinence, amount of activity, and mobility. Principles of treating ulcers include pressure relief, reducing bacterial counts, debriding necrotic tissue, and providing a moist, clean environment. Imagesp2385-ap2389-ap2392-a PMID:21221298

  5. Prevention of Bed Agglomeration Problems in a Fluidized Bed Boiler by Finding the Trigging Value of Sewage Sludge Dosage Added to Combustion of Biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Kajsa; Gervind, Pernilla

    2009-07-01

    Agglomeration of bed sand is a common problem during combustion of biofuels with high ash content in fluidized bed boilers. Former studies have shown that co-combustion of biofuels with sewage sludge increases the agglomeration temperature. Sewage sludge has a low heating value and high ash content. It would therefore be better to use sludge as an additive to the combustion than as a co-combusted biofuel. In this study the trigging value of sludge addition to the combustion of some biofuel was investigated. The effect of adding sludge with different precipitation chemicals, iron sulphate and aluminium sulphate, was investigated. The biofuels used for the experiments were bark, refused derived fuel (RDF) and a mixture of wood and straw, 75/25 % on energy basis. All experiments were carried out in a laboratory scale fluidized bed reactor. Analyses of chemical composition of bed sand and SEM/EDX analyses were performed after the combustion. Eventually agglomeration tests were performed in order to find the agglomeration temperature of the samples. Some of the samples sintered during the combustion and were not tested for the agglomeration temperature. SEM/EDX showed that all samples of bed sand contained sand particles with more or less coatings. In some cases the coatings seemed to consist of one dense inner layer and one more porous outer layer. From SEM/EDX and chemical composition analyses it was found that the total amount of phosphorous in the bed sand samples was increased with an increased addition of sludge in all experiments. The concentration of phosphorous was especially higher in the outer layers/coatings. It was also found that elements from the sludge seem to get caught by a sticky layer at the bed sand surface and form a non-sticky or less sticky layer that prevents agglomeration. The total amount of aluminium was increased with an increased addition of sludge for the wood/straw samples, while it increased with an increased amount of combusted fuel for

  6. A comparative analysis of pressure sore treatment modalities in community settings

    Directory of Open Access Journals (Sweden)

    N. Small

    2002-09-01

    Full Text Available The management of pressure sores in community settings, poses a clinical problem which challenges the patient’s tolerance and the clinician’s diligence and ingenuity. Pressure sores can be painful, lead to infection and are associated with considerable morbidity and increased mortality (Patterson & Bennett, 1995:919; Bale, Banks, Hagelstein & Harding, 1998:65. Treatment costs of these wounds are high in terms of resources (Colin 1995:65; Wood, Griffiths & Stoner, 1997:256. However, since there are untold cost in terms of pain and suffering to the patient, it is impossible to calculate the true cost of pressure sores (Dealey, 1994:87.

  7. An audit of the physiotherapy management of paraplegic patients with sacral pressure sores

    Directory of Open Access Journals (Sweden)

    D. Pather

    2013-01-01

    Full Text Available Introduction: Pressure sores are the most common complication post spinal cord injury that requires patients to be on bed rest. Patient bed rest delay rehabilitation and may lead to other complications associated with immobility. This study sought to establish the treatment interventions physiotherapists provide to patients with sacral pressure sores and the factors that they consider when deciding whether the patient should receive physiotherapy in the ward or gym. Methods: This was a questionnaire based survey of physiotherapists working in spinal cord injury rehabilitation units in South Africa. The self-designed questionnaire was sent to all the main spinal rehabilitation units in the country (14 located in Gauteng, Kwa-Zulu Natal, Western Cape, Eastern Cape and Free State provinces. Results: Thirty-nine physiotherapists from a total of 51 completed the questionnaires (76% response rate. The most common treatment practice for patients with sacral pressure sores was bed rest (98%. The most common physio-therapy practices (70% included were upper limb muscle strengthening, upper and lower limb passive movements, positioning into prone and side lying and passive stretching. The choice of treatment environment was influenced by doctors’ orders and the size, grade and duration of the pressure sores. Conclusion: Direct involvement in pressure sore management in South Africa seem to be less than in other parts of the world. If we are to minimise the pressure sore impact, it appears like we need more focus on gait re-education and standardised ADL programmes and patient treatment in the gym to possibly maximise healing and rehabilitation.

  8. Evidence-based medicine: pressure sores.

    Science.gov (United States)

    Cushing, Carolyn A; Phillips, Linda G

    2013-12-01

    After studying this article, the participant should be able to: 1. Cite risk factors for pressure sore development. 2. Detail the pathophysiology of pressure sores. 3. List the types and classification of pressure sores. 4. Consider the various nonsurgical conservative wound management strategies. 5. Describe the appropriate surgical interventions for each pressure sore type. 6. Understand the causes of recurrent pressure sores and methods of avoiding recurrence. Pressure sores are the result of unrelieved pressure, usually over a bony prominence. With an estimated 2.5 million pressure ulcers treated annually in the United States at a cost of $11 billion, pressure sores represent a costly and labor-intensive challenge to the health care system. A comprehensive team approach can address both prevention and treatment of these recalcitrant wounds. Consideration must be given to the patient's medical and socioeconomic condition, as these factors are significantly related to outcomes. Mechanical prophylaxis, nutritional optimization, treatment of underlying infection, and spasm control are essential in management. A variety of pressure sore patterns exist, with surgical approaches directed to maximize future coverage options. A comprehensive approach is detailed in this article to provide the reader with the range of treatment options available.

  9. Diabetes, Gum Disease, and Other Dental Problems

    Science.gov (United States)

    ... Diabetes, Sexual, & Bladder Problems Diabetes, Gum Disease, & Other Dental Problems How can diabetes affect my mouth? Too ... What if my mouth is sore after my dental work? A sore mouth is common after dental ...

  10. Code development for debris bed coolability problem. Final report for the period 1997-05-01 - 1999-08-14

    International Nuclear Information System (INIS)

    Loboiko, A.I.

    2000-03-01

    The study was devoted to the problem of debris bed coolability arising from severe accident at nuclear power reactor. After reactor core melting occurs and subsequent debris bed is formed in the lower plenum of reactor pressure vessel (RPV) it is important to confine this debris bed inside RPV boundary. One of the possible accident scenarios assumes the interaction between coolant and molten core materials resulting from rapid melt quenching, freezing and fragmentation. Particulated fuel and steel may subsequently settle on available surfaces within the reactor vessel, forming debris porous beds which produce radioactive decay heating. In case of severe core degradation, such heat transfer mechanisms as radiation, conduction and natural single-phase convection may appear to be insufficient and coolant boiling may happen on the surface or inside the bed. Depending on rate of heat generation there may be sufficient debris cool down or its 'dryout' which pose a danger for RPV integrity. The study considers development of 2D numerical code capable to predict coolant saturation as a function of different parameters. Analysis of previous activities on one-dimensional and multi-dimensional models was done. On the basis of the analysis it was concluded that the correct prediction of the debris saturation on dryant power requires two-dimensional numerical simulation considering the processes like two-phase convection, capillary effects, different models of permeability, different models of heat transfer between solid debris and coolant, non-homogeneity of parameters porous medium, heat and mass transfer between debris bed and a highly porous gap along the inner RPV surface. Particular attention was given to consideration of boundary conditions for debris bed. Introduction of the analytical model for dependence of gap properties on heat flux from debris bed allowed to create an algorithm for use in numerical calculations and finally to develop a code which allowed for stable

  11. [Pressure sores in a university hospital].

    Science.gov (United States)

    Barbut, Frédéric; Parzybut, Bérengère; Boëlle, Pierre-Yves; Neyme, Denis; Farid, Rachida; Kosmann, Marie-Jeanne; Luquel, Laurence

    2006-05-01

    To determine the prevalence of pressure sores, their risk factors, and the responsible microbial agents in an acute-care hospital and to evaluate their management. A prevalence survey was conducted from 5 July through 9 July 2004. Investigators completed a standardized questionnaire for each hospitalized patient, including demographic data (age, sex, previous hospitalizations, etc.) and Braden scale risk factors (sensory perception, humidity, activity, mobility, nutrition, and friction and shear). Two experts in skin care detected pressure sores by physical examination of the patients. Each pressure sore was swabbed and inoculated on selective media. Management was evaluated by reviewing the clinical charts of each patient with a pressure sore. The study included 535 adult patients (aged 59 +/- 19 years): 75 ulcer sores were observed in 37 patients (prevalence=6.9%). Stage I sores accounted for 24% of the total, stage II for 29%, stage III 31%, and stage IV 16%. The most frequent site was the heel (41%), followed by the sacrum (20%), elbow (11%), back (7%) and ischial tuberosities (7%). Sixty (80%) were acquired while hospitalized. Age-adjusted multivariate analyses found that the risk factors significantly associated with pressure sores were Braden scorepressure sores (OR=5.0 95% CI: 2.2-11.6, psores (24.5%), mostly stage III and IV, were colonized by multiple-drug-resistant bacteria (i.e., methicillin resistant Staphylococcus aureus, extended spectrum beta-lactamase Enterobacteriaceae). Seven (9.3%) of the 75 ulcers were diagnosed only during the survey, by the experts; of the 68 diagnosed before the survey, 57 (83.8%) had been under treatment. Treatment was considered inappropriate according to French guidelines in 31.6% of the cases. This prospective prevalence study resulted in better awareness of the patients at risk for pressure sores. It also made the recently created mobile geriatrics unit better known within the hospital.

  12. How elderly patients with femoral fracture develop pressure sores in hospital.

    Science.gov (United States)

    Versluysen, M

    1986-01-01

    The routine hospital management of 100 consecutive elderly patients was studied to determine the reason for the high incidence of pressure sores among patients admitted to hospital for femoral fractures. Of these patients, 66 developed sores, 83% occurring by the fifth day in hospital. This was due to the long periods that patients were immobilised on high pressure surfaces in the casualty department, wards, and theatres before repair of the fracture and restoration of their weight bearing function. Sores are not simply a ward or nursing problem, but an unintended consequence of hospital treatment. To reduce the incidence of sores elderly patients should be treated on low pressure patient support systems from the point of entry to hospital until mobility is restored. PMID:3085827

  13. Approach to the pressure sores in geriatric patients

    Directory of Open Access Journals (Sweden)

    Emre İnözü

    2012-09-01

    Full Text Available Objectives: The aim of this study was to evaluate the follow-up results of nutritionally supported geriatric patientswho were admitted for their pressure sores then plannedtheir treatment.Materials and methods: In this study, we analyzed thehospitalized geriatric pressure sore patients in our clinicwho were admitted between 2006 and 2011. We calculatedBody Mass Index and the blood albumin levels of allhospitalized geriatric patients. In this patient group proteinenergy malnutrition and deficiency were analyzed andproper nutrition support was provided accordingly. Afterrecovering from malnutrition further treatment surpassed.Results: The mean albumin levels of the hospitalized patientswas 2,53 ± 0,25 g/dL after nutritional support thoselevels increased to mean 3,95 ± 0,42 g/dL . Of all thosepatients 75% were operated when their general conditionallowed us for a surgery. Due to their high risk wedid not perform any surgical operation to the remaining25%.. Post operative mean hospitalization period was 12(8-21 days. Majority of the patients (78.6% were treatedsuccessfully either with surgical or conservative treatmentmodalities.Conclusions: The success of the geriatric pressure soretreatment is highly related with the proper nutritional supportfor the ongoing malnutrition-like pathologies. Beforeoperation nutritional support not only makes a healthygranulation tissue but also yields fast and reliable woundhealing. Despite their chronic health problems many ofour geriatric patients were treated surgically for their pressuresores.Key words: Pressure sore, geriatric medicine, malnutrition,nutritional support

  14. Quasi-two-layer morphodynamic model for bedload-dominated problems: bed slope-induced morphological diffusion.

    Science.gov (United States)

    Maldonado, Sergio; Borthwick, Alistair G L

    2018-02-01

    We derive a two-layer depth-averaged model of sediment transport and morphological evolution for application to bedload-dominated problems. The near-bed transport region is represented by the lower (bedload) layer which has an arbitrarily constant, vanishing thickness (of approx. 10 times the sediment particle diameter), and whose average sediment concentration is free to vary. Sediment is allowed to enter the upper layer, and hence the total load may also be simulated, provided that concentrations of suspended sediment remain low. The model conforms with established theories of bedload, and is validated satisfactorily against empirical expressions for sediment transport rates and the morphodynamic experiment of a migrating mining pit by Lee et al. (1993 J. Hydraul. Eng. 119 , 64-80 (doi:10.1061/(ASCE)0733-9429(1993)119:1(64))). Investigation into the effect of a local bed gradient on bedload leads to derivation of an analytical, physically meaningful expression for morphological diffusion induced by a non-zero local bed slope. Incorporation of the proposed morphological diffusion into a conventional morphodynamic model (defined as a coupling between the shallow water equations, Exner equation and an empirical formula for bedload) improves model predictions when applied to the evolution of a mining pit, without the need either to resort to special numerical treatment of the equations or to use additional tuning parameters.

  15. Quasi-two-layer morphodynamic model for bedload-dominated problems: bed slope-induced morphological diffusion

    Science.gov (United States)

    Maldonado, Sergio; Borthwick, Alistair G. L.

    2018-02-01

    We derive a two-layer depth-averaged model of sediment transport and morphological evolution for application to bedload-dominated problems. The near-bed transport region is represented by the lower (bedload) layer which has an arbitrarily constant, vanishing thickness (of approx. 10 times the sediment particle diameter), and whose average sediment concentration is free to vary. Sediment is allowed to enter the upper layer, and hence the total load may also be simulated, provided that concentrations of suspended sediment remain low. The model conforms with established theories of bedload, and is validated satisfactorily against empirical expressions for sediment transport rates and the morphodynamic experiment of a migrating mining pit by Lee et al. (1993 J. Hydraul. Eng. 119, 64-80 (doi:10.1061/(ASCE)0733-9429(1993)119:1(64))). Investigation into the effect of a local bed gradient on bedload leads to derivation of an analytical, physically meaningful expression for morphological diffusion induced by a non-zero local bed slope. Incorporation of the proposed morphological diffusion into a conventional morphodynamic model (defined as a coupling between the shallow water equations, Exner equation and an empirical formula for bedload) improves model predictions when applied to the evolution of a mining pit, without the need either to resort to special numerical treatment of the equations or to use additional tuning parameters.

  16. Mouth Problems

    Science.gov (United States)

    ... such as sores, are very common. Follow this chart for more information about mouth problems in adults. ... cancers. See your dentist if sharp or rough teeth or dental work are causing irritation. Start OverDiagnosisThis ...

  17. Specific and cross over effects of massage for muscle soreness: randomized controlled trial.

    Science.gov (United States)

    Jay, Kenneth; Sundstrup, Emil; Søndergaard, Stine D; Behm, David; Brandt, Mikkel; Særvoll, Charlotte A; Jakobsen, Markus D; Andersen, Lars L

    2014-02-01

    Muscle soreness can negatively interfere with the activities of daily living as well as sports performance. In the working environment, a common problem is muscle tenderness, soreness and pain, especially for workers frequently exposed to unilateral high repetitive movements tasks. The aim of the study is therefore to investigate the acute effect of massage applied using a simple device Thera-band roller Massager on laboratory induced hamstring muscle soreness, and the potential cross over effect to the non-massaged limb. 22 healthy untrained men (Mean age 34 +/- 7 years; mean height 181.7 +/- 6.9 cm; mean weight 80.6 +/- 6.4 kg; BMI: 24.5 +/- 1.3) with no prior history of knee, low back or neck injury or other adverse health issues were recruited. Participants visited the researchers on two separate occasions, separated by 48 hours, each time providing a soreness rating (modified visual analog scale 0-10), and being tested for pressure pain threshold (PPT) and active range of motion (ROM) of the hamstring muscles. During the first visit, delayed onset muscular soreness of the hamstring muscles was induced by 10 x 10 repetitions of the stiff-legged dead-lift. On the second visit participants received either 1) 10 minutes of roller massage on one leg, while the contralateral leg served as a cross over control, or 2) Resting for 10 minutes with no massage at all. Measurement of soreness, PPT and ROM were taken immediately before and at 0, 10, 30 and 60 min. after treatment. There was a significant group by time interaction for soreness (p < 0.0001) and PPT (p = 0.0007), with the massage group experiencing reduced soreness and increasing PPT compared with the control group. There was no group by time interaction for ROM (p = 0.18). At 10 min. post massage there was a significant reduction in soreness of the non-massaged limb in the cross over control group compared to controls but this effect was lost 30 minutes post massage. Massage with a roller device reduces

  18. [Options for flap coverage in pressure sores].

    Science.gov (United States)

    Nae, S; Antohi, N; Stîngu, C; Stan, V; Parasca, S

    2010-01-01

    Despite improvements in reconstructive techniques for pressure sores, recurrences are still seen frequently, and success rate remains variable. During 2003 - 2007, at the Emergency Hospital for Plastic Surgery and Burns in Bucharest, 27 patients underwent surgical repair of 45 pressure sores located at sacral (22 ulcers), ischial (12 ulcers) and trochanteric (11 ulcers) regions. The mean patient age was 57, 1 years (range 26 to 82 years). Mean postoperative follow-up was 6 months (range 2 months - 2 years). There were 18 complications for the 45 sores (40%). At 6 months postoperatively, recurrence was noted in 12 ulcers (27%). Details regarding indications, contraindications, advantages and disadvantages for different coverage options are outlined. The authors advocate the importance of surgical coverage in reducing morbidity, mortality and treatment costs.

  19. Occipital pressure sores in two neonates.

    Science.gov (United States)

    Liu, Yi; Xiao, Bin; Zhang, Cheng; Su, Zhihong

    2015-01-01

    The preference for a specific head shape can be influenced by people's culture, religious beliefs and race. Modern Chinese people prefer a "talented" head shape, which is rounded and has a long profile. To obtain their preferred head shape, some parents try to change their neonates' sleeping position. Due to these forced sleeping positions, positional skull deformities, such as plagiocephaly, may be present during the first few months of life. In this article, we report two neonatal cases, of Hui nationality and Dongxiang nationality, with occipital pressure sores that were caused by using hard objects as pillows with the intention of obtaining a flattened occiput. The pressure sores were deep to the occipital bone and needed surgical management. These pressure sores caused wounds that were repaired by local skin flaps, after debridement, and the use of external constraints from a dense sponge-made head frame for approximately two weeks. One case recovered with primary healing after surgical operation. The other case suffered from a disruption of the sutured wound, and a secondary operation was performed to cover the wound. These occipital pressure sores are avoidable by providing guidance to the parents in ethnic minorities' area regarding the prevention, diagnosis and management of positional skull deformity.

  20. BED-time charts and their application to the problems of interruptions in external beam radiotherapy treatments

    International Nuclear Information System (INIS)

    Sinclair, Judith A.; Oates, Jason P.; Dale, Roger G.

    1999-01-01

    Purpose: The use of radiobiological modelling to examine the likely consequences of interruptions to radiotherapy schedules and to assess various compensatory measures. Methods and Materials: An effect-time graphical display, the BED-time chart, has been developed using the linear-quadratic (LQ) model. This is used to examine the effects on tumour and normal tissues of treatment interruption scenarios representative of clinical situations. The mathematical criteria governing successful salvage have also been drafted and applied to typical situations. Results: The successful salvage of an interrupted treatment is dependent on a number of interacting factors and the method presented here can be used to examine the trade-offs that exist. Although the mathematics may be complex, it is shown that the dilemmas posed by an interrupted treatment may be more easily appreciated with reference to BED-time charts. These may therefore have a useful role as a teaching aid for portraying a wider variety of radiotherapy problems and also in the documentation of interruptions to treatment and the measures taken to compensate for them. Conclusions: Interruptions to radiotherapy regimes are undesirable and compensatory measures need to be initiated as soon as possible after the gap, with a view to completing the amended treatment within the originally prescribed treatment time. Adequate compensation is particularly difficult for long gaps and gaps which occur towards the end of the scheduled treatment. Modelling exercises can help establish guidelines on the available windows of opportunity

  1. Rational Pharmacotherapy for Sore Throat in Children at Different Stages of the Assistance

    Directory of Open Access Journals (Sweden)

    A.V. Zaychenko

    2013-09-01

    Full Text Available The article deals with one of the most pressing problems in pediatrics in the autumn and winter — a sore throat in children. The authors give its basic reasons, threatening symptoms that accompany sore throat, indicating an urgent need to visit a doctor, as well as the issues of treatment. It is noted that the most appropriate is the use of combination drugs that have complex (anti-microbial, anti-inflammatory, analgesic effect. The characteristics of Strepsils Kids preparation, developed specifically for use in children from 6 years, are given.

  2. Evidence for antibiotic use for sore throat and URTI in general practice

    African Journals Online (AJOL)

    banzi

    508 C M E September 2003 Vol.21 No.9. There is a common misconception among many people that antibiotics are necessary for common colds and their symptoms. Evidence- based medicine can provide a rational approach to this problem. Evidence for antibiotic use for sore throat and URTI in general practice. G T J KA ...

  3. At-Home Application of Autologous Platelet Rich Plasma as Treatment for Pressure Sore and Related Anemia.

    Science.gov (United States)

    Tendas, Andrea; Niscola, Pasquale; Giovannini, Marco; Costa, Adriana; Venditti, Daniela; Volta, Laura; Malandruccolo, Luigi; Sabbadini, Stefania; Lasorella, Rosa; Fabritiis, Paolo de; Cassetta, Rita; Perrotti, Alessio P

    2017-01-01

    Pressure sores are a major complication in the bed-ridden older patient. In this report, we present the case of platelet rich plasma (PRP) application for the treatment of a pressure sore in an 88-year-old female affected by transfusion-dependent chronic inflammatory disease anemia associated with the congenital and inherited condition of thalassemic trait carrier. A weekly application schedule was planned athome, given the patient's debilitation and her decreased performance status as well as personal and family difficulties to go as outpatients at our treatment center. After 9 PRP applications, a remarkable sore improvement was achieved so that PRP was discontinued; nevertheless, sore rapidly improved until the full resolution and the complete closing after 4 months from the start of PRP treatment. Noteworthy, transfusion support was interrupted and a significant recovery and a sustained stabilization of hemoglobin (Hb) level at 1 year after ulcer healing were observed. The present case suggests that PRP application, performed athome in our case, is a feasible and effective treatment for pressure sores and related complications. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  4. [Pressure sores unit--a one year study].

    Science.gov (United States)

    Jaul, E

    2001-10-01

    The phenomenon of pressure sores in the elderly patient often requires an alternative management policy to that of the standard treatment. In general, the therapeutic approach to pressure sores in the elderly should be different to that in younger patients. This modification is due to the accompanying comorbidity so often associated with aging. Due to accompanying illnesses, the aging population is at high risk and more predisposed to the development of pressure sores. The importance of the establishment of a unit for pressure sores arises from the specific geriatric team approach to the patient and the need to focus carefully on the pressure sores. The management of this special Pressure Sores Unit with a permanent capable staff requires skilled treatment, both localized and systemic, since pressure sores are very often a result of systemic failure or an indication of a terminal condition in the elderly patient. Over six months we followed-up on the number and location of the pressure sores in 47 patients in addition to other functional and nutritional parameters, in order to investigate any connection between the pressure sores and nutritional parameters. The results of the study indicate that the nutritional state of the patients admitted for pressure sores was very poor. Two thirds of the patients suffered from either dementia or stroke, and 90 percent were bedridden, incontinent and enterally fed. Despite the poor general condition of the patient, the study shows improvement in the pressure sores with a reduction from an average of 2.8 to 1.8 pressure sores per patient. The improvement in the pressure sore located on the legs was three times greater than those located in the pelvic area. By the end of the study, 50% of the patients had died, 33% of the original patients who were still in the unit showed improvement in the pressure sores and 15% were discharged showing complete recovery from the sores. No significant correlation was found between changes in the

  5. The ′reading man flap′ for pressure sore reconstruction

    Directory of Open Access Journals (Sweden)

    Stamatis Sapountzis

    2011-01-01

    Full Text Available Background: The treatment of pressure sores represents a significant challenge to health care professionals. Although, pressure wound management demands a multidisciplinary approach, soft tissue defects requiring reconstruction are often considered for surgical management. Myocutaneous and fasciocutaneous flaps can provide stable coverage of pressure sores. Purpose: Here, we describe our experience using a recent fasciocutaneous flap, which is named ′reading man′ flap, in sacral, ischial, and trochanteric pressure sores. Materials and Methods: During a period of 1 year the authors operated 16 patients, 11 men, and 5 women, using the reading man flap. The ages of the patients ranged from 24 to 78 years. The location of pressure sores was 8 sacral, 5 ischial, and 3 trochanteric pressure sores. The mean size of pressure sores was 8 cm × 9 cm. Results: All pressure sores covered bt the Reading Man flap healed asymptomatically. After follow-up of 2-8 months, no recurrences were encountered and no further surgical intervention was required. Conclusion: The reading man flap was found to be a useful technique for the closure of pressure sore in different anatomic locations. The advantage of tension-free closure and the minimal additional healthy skin excision made this flap a useful tool in pressure sore reconstructions.

  6. Effects of intravenous diclofenac on postoperative sore throat in ...

    African Journals Online (AJOL)

    Effects of intravenous diclofenac on postoperative sore throat in patients undergoing laparoscopic surgery at Aga Khan University Hospital, Nairobi: A prospective, randomized, double blind controlled trial.

  7. Management of patients with sore throats in relation to guidelines: an interview study in Sweden.

    Science.gov (United States)

    Hedin, Katarina; Strandberg, Eva Lena; Gröndal, Hedvig; Brorsson, Annika; Thulesius, Hans; André, Malin

    2014-12-01

    To explore how a group of Swedish general practitioners (GPs) manage patients with a sore throat in relation to current guidelines as expressed in interviews. Qualitative content analysis was used to analyse semi-structured interviews. Swedish primary care. A strategic sample of 25 GPs. Perceived management of sore throat patients. It was found that nine of the interviewed GPs were adherent to current guidelines for sore throat and 16 were non-adherent. The two groups differed in terms of guideline knowledge, which was shared within the team for adherent GPs while idiosyncratic knowledge dominated for the non-adherent GPs. Adherent GPs had no or low concerns for bacterial infections and differential diagnosis whilst non-adherent GPs believed that in patients with a sore throat any bacterial infection should be identified and treated with antibiotics. Patient history and examination was mainly targeted by adherent GPs whilst for non-adherent GPs it was often redundant. Non-adherent GPs reported problems getting patients to abstain from antibiotics, whilst no such problems were reported in adherent GPs. This interview study of sore throat management in a strategically sampled group of Swedish GPs showed that while two-thirds were non-adherent and had a liberal attitude to antibiotics one-third were guideline adherent with a restricted view on antibiotics. Non-adherent GPs revealed significant knowledge gaps. Adherent GPs had discussed guidelines within the primary care team while non-adherent GPs had not. Guideline implementation thus seemed to be promoted by knowledge shared in team discussions.

  8. Pressure sores and underlying bone infection

    International Nuclear Information System (INIS)

    Sugarman, B.

    1987-01-01

    Pressure sores are a serious complication of hospitalized and chronically ill patients. Evaluation for underlying bone infection can be made difficult by radiographic, nuclear imaging, and soft-tissue culture studies that are abnormal and suggest the presence of bone infection, when no infection is present. Evaluation by bone biopsy with histologic and microbiological studies can accurately and promptly diagnose whether bone infection is present. This allows appropriate treatment when infection is present, and prevents unneeded and potentially toxic antibiotic therapy when preliminary studies incorrectly suggest that infection is present

  9. Laser homeostatics on delayed onset muscle soreness

    Energy Technology Data Exchange (ETDEWEB)

    Liu, T C Y; Fu, D R; Liu, X G; Tian, Z X, E-mail: liutcy@scnu.edu.cn [Lab Laser Sports Medicine, South China Normal University, University Town, Guangzhou, GD 510006 (China)

    2011-01-01

    Delayed onset muscle soreness (DOMS) and its photobiomodulation were reviewed from the viewpoint of function-specific homeostasis (FSH) in this paper. FSH is a negative-feedback response of a biosystem to maintain the function-specific fluctuations inside the biosystem so that the function is perfectly performed. A stressor may destroy a FSH. A stress is a response of a biosystem to a stressor and may also be in stress-specific homeostasis (StSH). A low level light (LLL) is so defined that it has no effects on a function in its FSH or a stress in its StSH, but it modulate a function far from its FSH or a stress far from its StSH. For DOMS recovery, protein metabolism in the Z-line streaming muscular cell is the essential process, but the inflammation, pain and soreness are non-essential processes. For many DOMS phenomena, protein metabolism in the Z-line streaming muscular cell is in protein metabolism-specific homeostasis (PmSH) so that there are no effects of LLL although the inflammation can be inhibited and the pain can be relieved. An athlete or animal in the dysfunctional conditions such as blood flow restriction and exercise exhaustion is far from PmSH and the protein metabolism can be improved with LLL.

  10. Modelling the transition between fixed and mobile bed conditions in two-phase free-surface flows: The Composite Riemann Problem and its numerical solution

    Science.gov (United States)

    Rosatti, Giorgio; Zugliani, Daniel

    2015-03-01

    In a two-phase free-surface flow, the transition from a mobile-bed condition to a fixed-bed one (and vice versa) occurs at a sharp interface across which the relevant system of partial differential equations changes abruptly. This leads to the possibility of conceiving a new type of Riemann Problem (RP), which we have called Composite Riemann Problem (CRP), where not only the initial constant values of the variables but also the system of equations change from left to right of a discontinuity. In this paper, we present a strategy for solving a CRP by reducing it to a standard RP of a single, composite system of equations. This can be obtained by combining the two original systems by means of a suitable weighting function, namely the erodibility variable, and the introduction of an appropriate differential equation for this quantity. In this way, the CRP problem can be analyzed theoretically with standard methods, and the features of the solutions can be clearly identified. In particular, a stationary contact wave is able to correctly describe the sharp transition between mobile- and fixed-bed conditions. A finite volume scheme based on the Multiple Averages Generalized Roe approach (Rosatti and Begnudelli (2013) [22]) was used to numerically solve the fixed-mobile CRP. Several test cases demonstrate the effectiveness, exact well balanceness and high accuracy of the scheme when applied to problems that fall within the physical range of applicability of the relevant mathematical model.

  11. [The prevention of pressure sores in paediatric intensive care].

    Science.gov (United States)

    Thueux, Emilie

    2014-01-01

    In paediatric intensive care, children develop pressure sores as a result of various mechanical and clinical factors. The prevention and assessment of the risk of pressure sores constitute a key concern for the nursing teams which establish prevention strategies adapted to the young patients.

  12. New concepts in the prevention of pressure sores.

    Science.gov (United States)

    Bogie, Kath; Powell, Heather L; Ho, Chester H

    2012-01-01

    Pressure sores are a serious, and costly, complication for many patients with reduced mobility and sensation. Some populations, such as those with spinal cord injury (SCI), remain at high risk throughout their lifetime. Prevention is highly preferable and while the concept is readily definable, it is much more challenging to develop valid preventative measures. Subjective and objective approaches to risk factor assessment before pressure sores develop are reviewed, including risk status scales and emerging techniques to assess deep tissue injury. Devices to prevent pressure sores have traditionally focused on pressure-relieving cushions and mattresses. Technological advances being applied in the development of new pressure sore prevention devices are presented. Clinical evidence-based practice is integral to pressure sore prevention. Comprehensive assessment must include evaluation of systemic diseases, anatomical and physiological factors, together with environmental and psychosocial factors, which can all contribute to pressure sore development. Extrinsic factors need to be considered in conjunction with intrinsic tissue health factors and are reviewed together with an evaluation of currently available clinical practice guidelines. This chapter presents the broad diversity of factors associated with pressure sore development and highlights the need for an interdisciplinary team approach in order to maximize successful prevention of pressure sores. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Sacral pressure sore reconstruction – the pedicled superior gluteal ...

    African Journals Online (AJOL)

    Pressure sore reconstruction has always been challenging. Immobile patients are prone to develop pressure sores from unre- lieved pressure on tissue over the sacral area, with shear, friction, moisture and malnutrition as contributing factors. Up to one-third of immobilised patients in long-term care facilities will develop.

  14. Present situation, current problems and countermeasures to solve them by the material technology group in chemical companies; Kagaku shakai ni okeru sochi zairyo gijutsu no genjo to kadai oyobi sore eno taio

    Energy Technology Data Exchange (ETDEWEB)

    Nakahara, Masao. [Asahi Chemical Industry Corp., Tokyo (Japan). Production Technology Center

    1999-05-15

    A questionnaire investigation about the present situation, current problems and countermeasure to be discussed with by material technology groups in the eight chemical companies was carried out. It has become clear from the analysis of answers obtained that the roll of material group has been changing under the diminishing construction of new plant and the increased needs of stable and sustainable plant operation. The present major subjects of material groups, which are pointed out in the answers, are such new technological problems as the plant life estimation, the dissemination and handing down of material technology and the upbringing of technology successors. The countermeasures to meet those requirements made clear are such technology developments as a new monitoring system, preparation of database on material technology and closer cooperation with relatied associations. It is hoped for that the findings of this study would lead to further and more detailed indentification of common problems to be solved and development of practical countermeasures therefor. (author)

  15. Pressure sores following elective total hip arthroplasty: pitfalls of misinterpretation.

    Science.gov (United States)

    Keong, Nicole; Ricketts, David; Alakeson, Nuki; Rust, Philippa

    2004-01-01

    OBJECTIVE: To assess the reliability of reporting protocols regarding pressure sores. METHODS: Retrospective data were collected regarding pressure sore rates following total hip arthroplasty operations carried out during 2001 at two orthopaedic units in an NHS hospital (Princess Royal Hospital) and in a local private hospital. RESULTS: Preliminary results presented in audit and interim reports indicated an alarmingly high pressure sore rate across the two sites (17/172 [9.9%] NHS, 23/71 [32.4%] private hospital). On analysis, the data collection system was revealed to be flawed. Grade 1 areas (erythema with no ulceration) were included, leading to a dramatic discrepancy between reported and confirmed pressure sores. Re-analysis showed the confirmed pressure sore rates to be much lower (2.3% NHS, 1.0% private hospital). CONCLUSIONS: This audit suggests that both poor data collection and education lead to inaccurate audit. This may lead to subsequent inappropriate management and inappropriate NHS star ratings. PMID:15140301

  16. Bed-material entrainment and associated transportation infrastructure problems in streams of the Edwards Plateau, central Texas

    Science.gov (United States)

    Heitmuller, Franklin T.; Asquith, William H.

    2008-01-01

    The Texas Department of Transportation commonly builds and maintains low-water crossings (LWCs) over streams in the Edwards Plateau in Central Texas. LWCs are low-height structures, typically constructed of concrete and asphalt, that provide acceptable passage over seasonal rivers or streams with relatively low normal-depth flow. They are designed to accommodate flow by roadway overtopping during high-flow events. The streams of the Edwards Plateau are characterized by cobble- and gravel-sized bed material and highly variable flow regimes. Low base flows that occur most of the time occasionally are interrupted by severe floods. The floods entrain and transport substantial loads of bed material in the stream channels. As a result, LWCs over streams in the Edwards Plateau are bombarded and abraded by bed material during floods and periodically must be maintained or even replaced.

  17. Bed Bugs

    Science.gov (United States)

    Prevent, identify, and treat bed bug infestations using EPA’s step-by-step guides, based on IPM principles. Find pesticides approved for bed bug control, check out the information clearinghouse, and dispel bed bug myths.

  18. Mouth Problems and HIV

    Science.gov (United States)

    ... teeth (periodontitis), canker sores, oral warts, fever blisters, oral candidiasis (thrush), hairy leukoplakia (which causes a rough, white patch on the tongue), and dental caries. Read More Publications Cover image Mouth Problems + HIV Publication files Download Language English PDF — ...

  19. [Surgical coverage technics of pressure sores and their outcomes].

    Science.gov (United States)

    Bilkay, Ufuk; Helvaci, Evren; Tokat, Cenk; Ozek, Cüneyt; Akin, Yalçin

    2006-04-01

    We reviewed the outcome of 66 patients with 100 pressure sores between 1984 and 2002. In the current study, 100 pressure sores in 66 patients (45 male, 21 female; mean age 39.4; range 13 to 80 years) who underwent surgical repair of pressure sores reconstructed using myocutaneous or fasciocutaneous flaps, skin grafts, excision and closure. The risk factors for pressure sores included acute trauma-induced spinal cord injury in 40 (61%) patients with paraplegia and in 5 (7%) patients with quadriplegia; congenital spina bifida and multiple sclerosis in 7 (11%) patients and prolonged immobilization in 14 (21 patients) patients. We achieved an overall pressure sore recurrence rate of 22% and overall patient recurrence of 24% in a-3-year follow-up. The recurrence rates according to anatomic sites; 23% (10 of 43) for the ischial pressure sore, sacral 21% (8 of 37), and trochanteric 20% (4 of 20). Fasciocutaneous and myocutaneous flap reconstructions were the most durable, as they were associated with 17% (6 of 34) and 12% recurrence rates (5 of 39). To reduce the recurrence rates the authors advocate the use of myocutaneous and fasciocutaneous flaps instead of skin grafts or direct closure for the coverage of pressure sores.

  20. [Reduction of pressure sores during prone positioning of ventilated intensive care patients by the prone-head support system: a pilot study].

    Science.gov (United States)

    Prebio, Michael; Katz-Papatheophilou, Elfriede; Heindl, Werner; Gelbmann, Herbert; Burghuber, Otto C

    2005-02-01

    Prone positioning in patients with adult respiratory distress syndrome is a well-known method to improve oxygenation. The aim of our study was to evaluate a new device for prone positioning, the prone-head support system (PHS system), with regard to reduction of cutaneous pressure sores. In a pilot study we randomized 8 patients with ARDS in two groups: 180 degrees standard prone positioning (group without mask) and prone positioning with the PHS system (group with mask). The PHS system consists of a facemask support, which is connected to an adapted air suspension bed. The patients of both groups were intermittently proned for several days. We evaluated the pressure sores on head and neck before turning the patients prone for the first time and after each period of prone positioning. We documented the quantity, the size, the type and the localization of the pressure sores. There was no significant difference in the mean duration of prone positioning (27.1+/-14.7 hours in the group with mask versus 24.5+/-18.7 h in the group without mask). In the group with mask there were 1.5+/-0.8 new pressure sores by each proning, whereas in the group without mask there were 2.37+/-1.6 new pressure sores, which was lower, but not significantly. The overall area of pressure sores (798 mm2 versus 3184 mm2, p=0.004), the area of pressure sores per patient (199.5+/-104.7 mm2 versus 796+/-478 mm2, p=0.03) and the increase of the area of pressure sores per proning (79.8+/-52.0 mm2 versus 398.0+/-214.3 mm2, p=0.004) were significantly lower in the group with mask in comparison to the group without mask. The lips were the most effected localization in both groups. The pressure sores in the group with mask were less severe and showed a homogenous distribution in comparison to the group without mask. Blisters dominated in the group with mask in comparison to erosions, necrosis and ulcers in the group without mask. The PHS system with its face mask is able to reduce the extent and the

  1. Prevention of pressure sores by identifying patients at risk.

    Science.gov (United States)

    Andersen, K E; Jensen, O; Kvorning, S A; Bach, E

    1982-01-01

    The risk of pressure sores developing in patients admitted with acute conditions was assessed by a simple risk score system based on age, reduced mobility, incontinence, pronounced emaciation, redness over bony prominences, unconsciousness, dehydration, and paralysis in a prospective clinical study. During seven months in 1977, 600 of 3571 patients were classified as at risk. Of these 35 (5.8%) developed sores compared with five (0.2%) of those not at risk. The results of this study compared with those over the same period in 1976 show that close observation of at-risk patients and early detection of pressure sores prevents their development. PMID:6803980

  2. Prevention of pressure sores by identifying patients at risk

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Jensen, O; Kvorning, S A

    1982-01-01

    The risk of pressure sores developing in patients admitted with acute conditions was assessed by a simple risk score system based on age, reduced mobility, incontinence, pronounced emaciation, redness over bony prominences, unconsciousness, dehydration, and paralysis in a prospective clinical stu...... of pressure sores prevents their development.......The risk of pressure sores developing in patients admitted with acute conditions was assessed by a simple risk score system based on age, reduced mobility, incontinence, pronounced emaciation, redness over bony prominences, unconsciousness, dehydration, and paralysis in a prospective clinical study...

  3. Protecting Your Home from Bed Bugs

    Science.gov (United States)

    ... your home: Inspect the luggage rack in your hotel room for bed bugs. Check secondhand furniture, beds, ... with Bed Bug Problems Discover. Accessibility EPA Administrator Budget & Performance Contracting Grants January 19, 2017 Web Snapshot ...

  4. A longitudinal study of the incidence of pressure sores and the associated risks and strategies adopted in Italian operating theatres.

    Science.gov (United States)

    Bulfone, Giampiera; Marzoli, Ilaria; Quattrin, Rosanna; Fabbro, Carmen; Palese, Alvisa

    2012-02-01

    To explore the incidence of intraoperative pressure sores, the associated risk factors and the preventive strategies adopted by nurses, we adopted a longitudinal study in a 900-bed teaching hospital with multiple operating theatres, located in the North of Italy. Patients who underwent major surgery were evaluated four times: at the moment of operating theatre admission, at operating theatre discharge, and on their third and sixth postoperative day. Of the patients included (n = 102) who had an average age of 62.3 years (range 20-87), 12.7% (13/102) developed a pressure ulcer in the operating theatre; 46.1% (6/13) of these ulcers were still present on the third postoperative day. Some health conditions (diabetes mellitus, cardiac diseases) and intra-operative factors (lying on the operating table for more than 6.15 hours, intraoperative hypothermia) are associated with the occurrence of pressure sores.

  5. Mouth Sores Caused by Cancer Treatment: How to Cope

    Science.gov (United States)

    ... leading to sores and infections. Both chemotherapy and radiation can impair your body's germ-fighting system (immune system). With an impaired immune system, viruses, bacteria and fungi can more easily infect your mouth, ...

  6. When a Sore Throat Is a More Serious Infection

    Science.gov (United States)

    ... often called Hand, Foot, and Mouth disease). Infectious mononucleosis can produce a sore throat, often with marked ... most young children who are infected with the mononucleosis virus have few or no symptoms. Strep throat ...

  7. Difference between a Sore Throat, Strep, and Tonsillitis

    Science.gov (United States)

    ... often called Hand, Foot, and Mouth disease ). Infectious mononucleosis (often called "Mono") can produce a sore throat, ... most young children who are infected with the mononucleosis virus have few or no symptoms. Strep Throat ...

  8. Spotlight on Psoriasis: Preventing Patches of Itchy, Sore Skin

    Science.gov (United States)

    ... Subscribe August 2016 Print this issue Spotlight on Psoriasis Preventing Patches of Itchy, Sore Skin En español ... Sun Damage Sun and Skin Wise Choices Avoid Psoriasis Triggers Factors that may trigger psoriasis or make ...

  9. [Treatment of pubic osteomyelitis secondary to pressure sores].

    Science.gov (United States)

    Brunel, Anne-Sophie; Téot, Luc; Lamy, Brigitte; Masson, Raphaël; Morquin, David; Reynes, Jacques; Le Moing, Vincent

    2014-01-01

    There is no consensus regarding the diagnostic and therapeutic strategy for pubic osteomyelitis secondary to pelvic pressure sores. Diagnosis is often difficult and bone biopsies with microbiological and anatomical-pathological examination remain the gold standard. The rate of cicatrisation of pressure sores is low. Cleansing and negative pressure treatment are key elements of the treatment. Optimising the care management with medical-surgical collaboration is being studied in the Ostear protocol.

  10. Aetiology of pressure sores in patients with spinal cord injury.

    Science.gov (United States)

    Thiyagarajan, C; Silver, J R

    1984-01-01

    One hundred consecutive patients admitted to the National Spinal Injuries Centre, Stoke Mandeville Hospital, with pressure sores were studied to assess the relative importance of factors known to predispose to the development of scores. Loss of feeling was critical, because patients were unable to appreciate pain when the sore was developing. Risk of developing a sore increased with age, but duration of the paralysis was of equal importance. After discharge from hospital the presence of a caring relative or friend was essential for survival. Many patients developed sores because of poor facilities at home or inappropriate advice from those who looked after them. An even more distressing factor was the number of patients who developed sores in hospital owing to inadequate nursing care. There are relatively few paralysed patients in the community, but the lessons learnt in this study may be applied to all patients with orthopaedic injuries and to geriatric patients with limited mobility. Nursing and medical staff must turn patients regularly and ensure that there is proper equipment to relieve pressure on the skin. Patients should not be allowed to sit in a chair if they develop a sacral or trochanteric sore. More effort should be directed towards the appropriate education of patients, their relatives, and all those who are concerned with their welfare. Images FIG 1 FIG 2 FIG 3 PMID:6439284

  11. [Pressure sores in geriatric medicine: the role of nutrition].

    Science.gov (United States)

    Fontaine, Juliette; Raynaud-Simon, Agathe

    2008-01-01

    Malnutrition is frequent in geriatric patients: it affects 30 to 60% of elderly residents of institutions and 30 to 70% of patients admitted for short-term hospitalization. Malnutrition is a risk factor for developing pressure sores, and patients with them are more often and more severely malnourished than patients without them. In elderly subjects, multiple and interlinked factors may trigger or aggravate malnutrition; they may be physical, psychological or social and may be worsened by drugs and some diets. Malnutrition has been recognized as a risk factor for the onset and perpetuation of pressure sores. Of the dietary factors, protein intake seems most important. A low body mass index (BMI), low serum albumin, and weight loss are associated with an increased risk of pressure sores. A physician observing pressure sores must conduct a nutritional assessment, using clinical and laboratory screening tools. The criteria for malnutrition in elderly subjects are weight loss > or =5% in 3 months or > or =10% in 6 months, BMIpressure sores in geriatric medicine. It must be adapted for each patient. The recommended calorie intake in malnourished patients at risk of or with pressure sores is 30-40 kcal/kg/d, with 1.2-1.5 g of proteins/kg/d.

  12. Muscular soreness following prolonged intermittent high-intensity shuttle running.

    Science.gov (United States)

    Thompson, D; Nicholas, C W; Williams, C

    1999-05-01

    The aim of this study was to examine the impact of prolonged intermittent high-intensity shuttle running on soreness and markers of muscle damage. Sixteen males took part in the study, half of whom were assigned to a running group and half to a resting control group. The exercise protocol involved 90 min of intermittent shuttle running and walking (Loughborough Intermittent Shuttle Test: LIST), reflecting the activity pattern found in multiple-sprint sports such as soccer. Immediately after exercise, there was a significant increase (P < 0.05) in serum activities of creatine kinase and aspartate aminotransferase, and values remained above baseline for 48 h (P < 0.05). Median peak activities of creatine kinase and aspartate aminotransferase occurred 24 h post-exercise and were 774 and 43 U x l(-1), respectively. The intensity of general muscle soreness, and in the specific muscles investigated, was greater than baseline for 72 h after the shuttle test (P < 0.05), peaking 24-48 h post-exercise (P < 0.05). Muscle soreness was not correlated with either creatine kinase or aspartate aminotransferase activity. Soreness was most frequently reported in the hamstrings. Neither soreness nor serum enzyme activity changed in the controls over the 4 day observation period. It appears that unaccustomed performance of prolonged intermittent shuttle running produces a significant increase in both soreness and markers of muscle damage.

  13. Combined V-Y Fasciocutaneous Advancement and Gluteus Maximus Muscle Rotational Flaps for Treating Sacral Sores

    Directory of Open Access Journals (Sweden)

    Hyun Ho Han

    2016-01-01

    Full Text Available The sacral area is the most common site of pressure sore in bed-ridden patients. Though many treatment methods have been proposed, a musculocutaneous flap using the gluteus muscles or a fasciocutaneous flap is the most popular surgical option. Here, we propose a new method that combines the benefits of these 2 methods: combined V-Y fasciocutaneous advancement and gluteus maximus muscle rotational flaps. A retrospective review was performed for 13 patients who underwent this new procedure from March 2011 to December 2013. Patients’ age, sex, accompanying diseases, follow-up duration, surgical details, complications, and recurrence were documented. Computed tomography was performed postoperatively at 2 to 4 weeks and again at 4 to 6 months to identify the thickness and volume of the rotational muscle portion. After surgery, all patients healed within 1 month; 3 patients experienced minor complications. The average follow-up period was 13.6 months, during which time 1 patient had a recurrence (recurrence rate, 7.7%. Average thickness of the rotated muscle was 9.43 mm at 2 to 4 weeks postoperatively and 9.22 mm at 4 to 6 months postoperatively (p=0.087. Muscle thickness had not decreased, and muscle volume was relatively maintained. This modified method is relatively simple and easy for reconstructing sacral sores, provides sufficient padding, and has little muscle donor-site morbidity.

  14. "Tazomoka Is Not a Problem". Local Perspectives on Malaria, Fever Case Management and Bed Net Use in Madagascar.

    Science.gov (United States)

    Mattern, Chiarella; Pourette, Dolorès; Raboanary, Emma; Kesteman, Thomas; Piola, Patrice; Randrianarivelojosia, Milijaona; Rogier, Christophe

    2016-01-01

    Although its incidence has been decreasing during the last decade, malaria is still a major public health issue in Madagascar. The use of Long Lasting Insecticidal Nets (LLIN) remains a key malaria control intervention strategy in Madagascar, however, it encounters some obstacles. The present study aimed to explore the local terminology related to malaria, information channels about malaria, attitude towards bed nets, and health care seeking practices in case of fever. This article presents novel qualitative findings about malaria. Until now, no such data has been published for Madagascar. A comparative qualitative study was carried out at four sites in Madagascar, each differing by malaria epidemiology and socio-cultural background of the populations. Seventy-one semi-structured interviews were conducted with biomedical and traditional caregivers, and members of the local population. In addition, observations of the living conditions and the uses of bed net were conducted. Due to the differences between local and biomedical perspectives on malaria, official messages did not have the expected impact on population in terms of prevention and care seeking behaviors. Rather, most information retained about malaria was spread through informal information circulation channels. Most interviewees perceived malaria as a disease that is simple to treat. Tazomoka ("mosquito fever"), the Malagasy biomedical word for malaria, was not used by populations. Tazo ("fever") and tazomahery ("strong fever") were the terms more commonly used by members of the local population to refer to malaria related symptoms. According to local perceptions in all areas, tazo and tazomahery were not caused by mosquitos. Each of these symptoms required specific health recourse. The usual fever management strategies consisted of self-medication or recourse to traditional and biomedical caregivers. Usage of bed nets was intermittent and was not directly linked to protection against malaria in the eyes

  15. Computed tomography of pressure sores, pelvic abscess, and osteomyelitis in patients with spinal cord injury

    International Nuclear Information System (INIS)

    Firooznia, H.; Rafii, M.; Golimbu, C.; Lam, S.; Sokolow, J.; Kung, J.S.

    1982-01-01

    Nine patients with spinal cord injury (SCI) and large pressure ulcers and other possible complications, were evaluated by computed tomography (CT), conventional radiography, tomography, bone scanning, gallium scanning, and sonography. CT revealed the depth, extent, and relationship of the ulcer-bed to the underlying structures in all 9 patients. CT also positively identified unsuspected intra- and extra-pelvic abscess and pelvic osteomyelitis in 4 patients each. Other modalities identified only 2 of these complications. We believe CT is the modality of choice for evaluation of these complications in SCI patients, because of its superior ability in evaluation of pressure sores and detection of pathologic changes in soft tissue and bone in the pelvic region

  16. Treatment of ischial pressure sores with double adipofascial turnover flaps.

    Science.gov (United States)

    Lin, Haodong; Hou, Chunlin; Xu, Zhen; Chen, Aiming

    2010-01-01

    Despite a variety of flap reconstruction options, the ischium remains the most difficult pressure sore site to treat. This article describes the authors' successful surgical procedure for coverage of ischial ulcers using double adipofascial turnover flaps.After debridement, the adipofascial flaps are harvested both cephalad and caudal to the defect. The flaps are then turned over to cover the exposed bone in a manner so as to overlap the 2 flaps. The skin is then closed with sutures in 2 layers. A total of 15 patients with ischial sores were treated using this surgical procedure.The follow-up period ranged from 11 to 159 months, with a mean of 93.6 months. Overall, 86.7% of the flaps (13 of 15) healed primarily. One patient had a recurrent grade II ischial pressure sore again 11 months after the operation. The other 14 patients did not have a recurrence.Treatment of ischial pressure sores with adipofascial turnover flaps provides an easy, minimally invasive procedure, with preservation of future flap options, and a soft-tissue supply sufficient for covering the bony prominence and filling dead space. This technique is a reliable and safe reconstructive modality for the management of minor ischial pressure sores.

  17. Pressure sores--a multifaceted approach to prevention and treatment.

    Science.gov (United States)

    Staas, W. E.; Cioschi, H. M.

    1991-01-01

    The incidence and effect of pressure sores on the disabled and elderly population have created a challenge to physicians and health care professionals, from emergency departments to rehabilitation units, and in the community. If not prevented, the morbidity and mortality of patients and the direct and indirect costs to both patients and the health care system are radically increased. In this article we define the impact on our health care system of pressure sores, provide an overview of a multifaceted approach to their prevention and management, and introduce successful behavioral and educational approaches for patients with chronic, recurrent sores. A coordinated approach with patients as informed participants and their care givers enhances the chances for success. PMID:1830985

  18. Medial circumflex femoral artery flap for ischial pressure sore

    Directory of Open Access Journals (Sweden)

    Palanivelu S

    2009-01-01

    Full Text Available A new axial pattern flap based on the terminal branches of the medial circumflex femoral artery is described for coverage of ischial pressure sore. Based on the terminal branches of the transverse branch of medial circumflex femoral artery, which exit through the gap between the quadratus femoris muscle above and the upper border of adductor magnus muscle below, this fascio cutaneous flap is much smaller than the posterior thigh flap but extremely useful to cover ischeal pressure sores. The skin redundancy below the gluteal fold allows a primary closure of the donor defect. It can also be used in combination with biceps femoris muscle flap.

  19. [An assessment scale for the prevention of pressure sores in children].

    Science.gov (United States)

    Chauvet, Corinne; Poirier, Marie-Renée; Sourisseau, Petronela Rachieru; Béduneau, Denis; Soulard, Anthony; Delacroix, Delphine

    2015-04-01

    Pressure sores in children are rare. However, when they do occur they can have significant consequences. Professionals in paediatric units realised the importance of assessing the risk of pressure sores and developed a pressure sore assessment scale specific to children. This project, carried out through a hospital-training school partnership, emphasises the importance of clinical reasoning in nursing practices.

  20. Parental contribution to over prescription of antibiotics for sore throat ...

    African Journals Online (AJOL)

    Introduction: Antibiotics are often prescribed by physicians for sore throat in children because of the danger of post streptococcal complications. The role of the parents in over prescription of antibiotics is less well known. Objective: To evaluate the knowledge, attitudes and practice of parents to antibiotic prescription for ...

  1. [Support devices for the prevention and treatment of pressure sores].

    Science.gov (United States)

    Perrouin-Verbe, Brigite

    2014-12-01

    There is a strategy to be followed in the treatment of patients with specific pathologies placing them at high risk of pressure sores. In some cases, sophisticated support devices are used.These techniques must be combined with basic good practices.

  2. Reconstruction of pressure sores with perforator-based propeller flaps.

    Science.gov (United States)

    Jakubietz, Rafael G; Jakubietz, Danni F; Zahn, Robert; Schmidt, Karsten; Meffert, Rainer H; Jakubietz, Michael G

    2011-03-01

    Perforator flaps have been successfully used for reconstruction of pressure sores. Although V-Y advancement flaps approximate debrided wound edges, perforator-based propeller flaps allow rotation of healthy tissue into the defect. Perforator-based propeller flaps were planned in 13 patients. Seven pressure sores were over the sacrum, five over the ischial tuberosity, and one on the tip of the scapula. Three patients were paraplegic, six were bedridden, and five were ambulatory. In three patients, no perforators were found. In 10 patients, propeller flaps were transferred. In two patients, total flap necrosis occurred, which was reconstructed with local advancement flaps. In two cases, a wound dehiscence occurred and had to be revised. One hematoma required evacuation. No further complications were noted. No recurrence at the flap site occurred. Local perforator flaps allow closure of pressure sores without harvesting muscle. The propeller version has the added benefit of transferring tissue from a distant site, avoiding reapproximation of original wound edges. Twisting of the pedicle may cause torsion and venous obstruction. This can be avoided by dissecting a pedicle of at least 3 cm. Propeller flaps are a safe option for soft tissue reconstruction of pressure sores. © Thieme Medical Publishers.

  3. [Surgical issues and outcomes in ischial pressure sores treatment].

    Science.gov (United States)

    Voulliaume, D; Grecea, M; Viard, R; Brun, A; Comparin, J-P; Foyatier, J-L

    2011-12-01

    Ischiatic pressure sores are frequent in spinal cord injury patients, associated with bad prognosis and high recurrence rate. Many surgical techniques were described, including surgical debridement followed by pedicled flap coverage. We aim to propose a practical decision tree for primary or secondary ischial pressure sore treatment. Our series of 48 operated ischial sores with an average follow up of 4 years (range 2 to 8years) is analyzed and compared to previously published reports. Surgical techniques are discussed according to their specific indications. The optimal recurrence rate in published reports about pressure sore treatment is 20%; a rate inferior to 19% is found in our series, showing the equal importance of flap selection and postoperative care and education. Depending on each situation, various available flaps are described and compared: gluteus maximus flap, biceps femoris flap, gracilis flap, tensor fascia lata flap, fasciocutaneous thigh flaps, rectus femoris and vastus lateralis flap, rectus abdominis flap. Specific surgical indications for more extensive wounds are studied: resection arthroplasty of the hip, hip disarticulation, fillet flaps from the leg, microsurgery. Based upon our experience, a decision tree summarizes our proposition of flap selection, depending on the wound size and the patient background. Copyright © 2010 Elsevier Masson SAS. All rights reserved.

  4. Medicinal Plants for Healing Sores and Wounds among the ...

    African Journals Online (AJOL)

    Medicinal Plants for Healing Sores and Wounds among the Communities Surrounding Ungoye Forest, Kwazulu-Natal, South Africa. ... The focus was on the medicinal plants that grow in the Ungoye forest and around the homesteads. The survey ... Keywords: Traditional medicine, documentation, Ethno-survey, wounds.

  5. Antibiotic prescribing in patients with self-reported sore throat

    NARCIS (Netherlands)

    Mehta, Nishchay; Schilder, Anne; Fragaszy, Ellen; E R Evans, Hannah; Dukes, Oliver; Manikam, Logan; Little, Paul; Smith, Sarah C; Hayward, Andrew

    2017-01-01

    OBJECTIVES: To investigate the predictors of general practitioner (GP) consultation and antibiotic use in those developing sore throat. METHODS: We conducted a prospective population-based cohort study on 4461 participants in two rounds (2010-11) from 1897 households. RESULTS: Participants reported

  6. Sore throat · vaginal discharge · labial ulcer · Dx?

    Science.gov (United States)

    Caravelli, Ashley; Bhatnagar, Rupal; Ashaye, Adelola

    2016-06-01

    The patient complained of worsening vaginal pain and increased vaginal discharge, but reported resolution of her back and chest pain. She also said that a week earlier, she'd had a fever that reached 104° F and a sore throat. She denied urinary frequency/urgency, sexual activity, or sexual abuse.

  7. Pressure sores in spinal cord injury: Active intervention saves costs

    African Journals Online (AJOL)

    2008-07-22

    Jul 22, 2008 ... interrogated for all cervical spine injuries. Patients were identified retrospectively for the period April 2003 to May 2006 and divided into 4 groups according to the level of intervention they received to prevent pressure sores. Group A. These were the first 100 patients with cervical injuries managed in the unit ...

  8. The Effect of Early Complications on Flap Selection on Sacral Pressure Sores

    Directory of Open Access Journals (Sweden)

    Musa Kemal Keleş

    2017-06-01

    Full Text Available Objective: Pressure sores occur in bedridden patients in intensive care units, clinics, and even at their own places. Care for sick relatives and working with doctors to address treatment options and ensure proper follow-up are some of the problems associated with these types of wounds. Surgical therapy in the treatment of pressure ulcers is associated with significant complications. In comparison to non-surgical treatment, surgical treatment has a low complication rate and is more cost-effective. The surgical treatment enables the patients to return to their social life sooner than non-surgical treatment. Patient's ability to early return to their social life is advantageous in terms of reducing morbidity and the need for additional operations. This study is aimed to review the flap choices used to treat sacral pressure sores and the resulting acute complications rates retrospectively. Material and Methods: Patients treated for stage 3 and stage 4 sacral pressure sores in our clinic in the past 5 years were included in the study. Patient records were analyzed retrospectively. Patients' demographic data and surgical treatment they received were documented. Surgical method and surgical outcomes were evaluated and early complication rates were determined. Result: Fifty patients were included in the study; 10 of them were female, 40 of were male cases. The most common causative agent was paraplegia after traffic accident. Conclusion: A significant difference was not observed between the type of flap used in the surgical treatment and the rate of complications. Consequently, the surgical treatment of pressure ulcers in the sacral region depends on the patient's individual situation, the cooperation of the family, and previously applied treatments

  9. Urban sores. On the interaction between segregation, urban decay and deprived neighbourhoods

    DEFF Research Database (Denmark)

    Andersen, Hans Skifter

    Most European countries have experienced special problems that have emerged in certain more or less well-defined parts of cities called de-prived or depressed urban neighbourhoods. These problems were initially found in the oldest urban areas with the lowest quality housing. Since the beginning...... of the 1980s, however, in Europe they have also emerged in newer social housing estates outside city centres. These neighbourhoods display visible physical and social problems that can disfigure the perhaps otherwise attractive urban landscape. They could in severe cases even be termed sores on the face...... of the city. They are often perceived by the public as places that are not inhabited or frequented by decent people – they are seen as ‘places of exclusion’. The purpose of this book is to contribute to a deeper understanding of why such neighbourhoods come to exist and the impacts they have on cities. Urban...

  10. Intraoperative indocyanine green fluorescent angiography-assisted modified superior gluteal artery perforator flap for reconstruction of sacral pressure sores.

    Science.gov (United States)

    Chang, Chun-Kai; Wu, Chien-Ju; Chen, Chun-Yu; Wang, Chi-Yu; Chu, Tzi-Shiang; Hsu, Kuo-Feng; Chiu, Han-Ting; Liu, Hung-Hui; Chou, Chang-Yi; Wang, Chih-Hsin; Lin, Chin-Ta; Dai, Niann-Tzyy; Tzeng, Yuan-Sheng

    2017-12-01

    Pressure sores are often observed in patients who are bedridden. They can be a severe problem not only for patients and their caregivers but also for plastic surgeons. Here, we describe a new method of superior gluteal artery perforator flap harvesting and anchoring with the assistance of intraoperative indocyanine green fluorescent angiography. In this report, we describe the procedure and outcomes for 19 patients with grades III and IV sacral pressure sores who underwent the operation between September 2015 and November 2016. All flaps survived, and two experienced wound-edge partial dehiscence. With the assistance of this imaging device, we were able to acquire a reliable superior gluteal artery perforator flap and perform modified operations with it that are safe, easy to learn and associated with fewer complications than are traditional. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  11. Fluidised bed heat exchangers

    International Nuclear Information System (INIS)

    Elliott, D.E.; Healey, E.M.; Roberts, A.G.

    1974-01-01

    Problems that have arisen during the initial stages of development of fluidised bed boilers in which heat transfer surfaces are immersed in fluidised solids are discussed. The very high heat transfer coefficients that are obtained under these conditions can be exploited to reduce the total heat transfer surface to a fraction of that in normal boilers. However, with the high heat flux levels involved, tube stressing becomes more important and it is advantageous to use smaller diameter tubes. One of the initial problems was that the pumping power absorbed by the fluidised bed appeared to be high. The relative influence of the fluidising velocity (and the corresponding bed area), tube diameter, tube spacing, heat transfer coefficient and bed temperature on pumping power and overall cost was determined. This showed the importance of close tube packing and research was undertaken to see if this would adversely affect the heat transfer coefficient. Pressure operation also reduces the pumping power. Fouling and corrosion tests in beds burning coal suggest that higher temperatures could be reached reliably and cost studies show that, provided the better refractory metals are used, the cost of achieving higher temperatures is not unduly high. It now remains to demonstrate at large scale that the proposed systems are viable and that the methods incorporated to overcome start up and part lead running problems are satisfactory. The promising role of these heat transfer techniques in other applications is briefly discussed

  12. [Reliability and validity of the Braden Scale for predicting pressure sore risk].

    Science.gov (United States)

    Boes, C

    2000-12-01

    For more accurate and objective pressure sore risk assessment various risk assessment tools were developed mainly in the USA and Great Britain. The Braden Scale for Predicting Pressure Sore Risk is one such example. By means of a literature analysis of German and English texts referring to the Braden Scale the scientific control criteria reliability and validity will be traced and consequences for application of the scale in Germany will be demonstrated. Analysis of 4 reliability studies shows an exclusive focus on interrater reliability. Further, even though examination of 19 validity studies occurs in many different settings, such examination is limited to the criteria sensitivity and specificity (accuracy). The range of sensitivity and specificity level is 35-100%. The recommended cut off points rank in the field of 10 to 19 points. The studies prove to be not comparable with each other. Furthermore, distortions in these studies can be found which affect accuracy of the scale. The results of the here presented analysis show an insufficient proof for reliability and validity in the American studies. In Germany, the Braden scale has not yet been tested under scientific criteria. Such testing is needed before using the scale in different German settings. During the course of such testing, construction and study procedures of the American studies can be used as a basis as can the problems be identified in the analysis presented below.

  13. Ear Acupuncture for Acute Sore Throat: A Randomized Controlled Trial

    Science.gov (United States)

    2014-09-26

    SEP 2014 2. REPORT TYPE Final 3. DATES COVERED 4. TITLE AND SUBTITLE Ear acupuncture for acute sore throat. A randomized controlled trial...Auncular Acupuncture is a low risk option for acute pain control •Battlefield acupuncture (BFA) IS a specific auncular acupuncture technique •BFA IS...Strengths: Prospect1ve RCT •Weaknesses Small sample stze. no sham acupuncture performed, patients not blinded to treatment •Th1s study represents an

  14. [Effects of massage on delayed-onset muscle soreness].

    Science.gov (United States)

    Bakowski, Paweł; Musielak, Bartosz; Sip, Paweł; Biegański, Grzegorz

    2008-01-01

    Delayed onset muscle soreness (DOMS) is the pain or discomfort often felt 12 to 24 hours after exercising and subsides generally within 4 to 6 days. Once thought to be caused by lactic acid buildup, a more recent theory is that it is caused by inflammatory process or tiny tears in the muscle fibers caused by eccentric contraction, or unaccustomed training levels. Exercises that involve many eccentric contractions will result in the most severe DOMS. Fourteen healthy men with no history of upper arm injury and no experience in resistance training were recruited. The mean age, height, and mass of the subjects were 22.8 +/- 1.2 years, 178.3 +/- 10.3 cm, and 75.0 +/- 14.2 kg, respectively. Subjects performed 8 sets of concentric and eccentric actions of the elbow flexors with each arm according to Stay protocol. One arm received 10 minutes of massage 30 minutes after exercise, the contralateral arm received no treatment. Measurements were taken at 9 assessment times: pre-exercise and postexercise at 10 min, 6, 12, 24, 36, 48, 72 and 96 hours. Dependent variables were range of motion, perceived soreness and upper arm circumference. There was noticed difference in perceived soreness across time between groups. The analysis indicated that massage resulted in a 10% to 20% decrease in the severity of soreness, but the differences were not significant. Difference in range of motion and arm circumference was not observed. Massage administered 30 minutes after exercises could have a beneficial influence on DOMS but without influence on muscle swelling and range of motion.

  15. Pressure sores and blood and serum dysmetabolism in spinal cord injury patients.

    Science.gov (United States)

    Scivoletto, G; Fuoco, U; Morganti, B; Cosentino, E; Molinari, M

    2004-08-01

    Spinal cord injury (SCI) patients with pressure sores were studied before and after surgical intervention for ulcer healing and compared with matched SCI patients without sores and with patients with pressure sores and other diseases. To analyse the relationship between pressure sores and anaemia and serum protein alteration in SCI patients. To study the pathogenesis of these alterations and suggest appropriate therapy. Spinal cord unit in Rome, Italy. A total of 13 SCI patients with pressure sores, 13 comparable patients without pressure sores and four patients with other diseases and pressure sores. Haematochemical parameters. Patients with pressure sore showed significant decreased red cells, decreased haemoglobin and haematocrit, increased white cells and ferritin and decreased transferrin and transferrin saturation; total hypoproteinemia and hypoalbuminemia with increased Alfa-1 and gamma globulins increased erythrocyte sedimentation rate and C-reactive protein were also present. The alterations returned to normal after surgical intervention for pressure sore healing. Patients with pressure sores suffer from anaemia and serum protein alteration that fells within the range of metabolic alteration of chronic disorders and neoplastic diseases. The alterations depend on a decreased utilisation of iron stores in the reticuloendothelial system and on inhibition of the hepatic synthesis of albumin. With regard to treatment, iron treatment should be avoided because of the risk of haemochromatosis.

  16. The Pacman Perforator-Based V-Y Advancement Flap for Reconstruction of Pressure Sores at Different Locations.

    Science.gov (United States)

    Bonomi, Stefano; Salval, André; Brenta, Federica; Rapisarda, Vincenzo; Settembrini, Fernanda

    2016-09-01

    Many procedures have been proposed for the treatment of pressure sores, and V-Y advancement flaps are widely used to repair a defect. Unfortunately, the degree of mobility of a V-Y advancement flap is dependent on the laxity of the underlying subcutaneous tissue. This is an important disadvantage of traditional V-Y advancement flap and limits its use.We used V-Y advancement flaps as perforator-based to overcome mobility restriction problem, with a further modification (Pacman-like shape) to improve the covering surface area of the flap. Between January 2012 and December 2014, the authors used 37 V-Y Pacman perforator-based flaps in 33 consecutive patients for coverage of defects located at sacral (n = 21), ischial (n = 13), trochanter (n = 1) regions. There were 27 male and 6 female patients with a mean age of 49.9 years (range, 15-74 years). All flaps survived completely (92.3%) except 3 in which one of them had undergone total necrosis due to hematoma and the other 2 had partial necrosis. No venous congestion was observed. The mean follow-up period was 14.9 months (range, 2-38 months). No flap surgery-related mortality or recurrence of pressure sores was noted. The V-Y Pacman perforator-based advancement flaps are safe and very effective for reconstruction of pressure sores at various regions. The advantage of our modification procedure include shorter operative time, lesser pedicle dissection, low donor site morbidity, good preservation of muscle, and offers remarkable excursion to the V-Y flap, which make the V-Y Pacman perforator-based flaps an excellent choice for large pressure sore coverage.

  17. Sea bed mapping and inspection

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The conference has 24 presentations on the topics: Sea bed mapping, inspection, positioning, hydrography, marine archaeology, remote operation vehicles and computerized simulation technologies, oil field activities and plans, technological experiences and problems. (tk)

  18. How effective are treatments other than antibiotics for acute sore throat?

    OpenAIRE

    Thomas, M; Del Mar, C; Glasziou, P

    2000-01-01

    To estimate the benefits of treatments other than antibiotics for acute sore throat, and the differences between non-antibiotic interventions and controls in patient-perceived pain of sore throat, a systematic review of controlled trials in Medline and the Cochrane Library was carried out. Sixty-six randomised controlled trials (with or without additional antibiotics) were identified and 17 met the selection criteria. Twenty-two non-antibiotic managements for sore throat were compared. Their ...

  19. Prophylaxis of postintubation sore throat by the use of single puff inhalation of clomethasone dipropionate preoperatively

    International Nuclear Information System (INIS)

    Bashir, I.; Masood, N.

    2014-01-01

    Objective: The objective of this study was to asses the occurrence and severity of sore throat following endotracheal anesthesia and its reduction by beclomethasone inhalation. Study Design: A randomized controlled trial. Place and Duration of Study: This study was carried out at the main operation theatre, Combined Military Hospital Rawalpindi from October 2002 to April 2003. Patients and Methods: Two hundred patients undergoing general anaesthesia for elective surgery were included. Patients were randomly assigned to two groups of 100 patients each. The patients in group A were given one puff inhalation of beclomethasone before intubation while group B was control group. The patients were evaluated for occurrence and severity of postoperative sore throat by direct questions 6, 12, 24 and 48 hours after surgery. Results: In the beclomethasone group, 10 patients had sore throat as compared to 55 in control group (p<0.01). All 10 patients who experienced symptoms in beclomethasone group had mild sore throat while among the patients in the control group 22 had mild, 13 had moderate and 20 had severe sore throat. After 48 hours, no patient had the symptoms in the study group while 9 of the control group still suffered from sore throat. No drug related side effects were observed. Conclusion: Postoperative sore throat after general anaesthesia is common (occurrence rate of 55%). Beclomethasone inhaler is highly effective in the prevention of postoperative sore throat. It reduces both the occurrence and severity of sore throat. (author)

  20. Development of a cushion to prevent ischial pressure sores.

    Science.gov (United States)

    Bowker, P; Davidson, L M

    1979-01-01

    A study was carried out jointly by nursing staff and technologists in an attempt to develop a cushion based on scientific principles and measurement that might prevent pressure sores. At each stage in the development clinical trials were carried out, and using the results of these together with the opinions of medical staff and patients who used the cushion the design was suitably modified. Over four years a seat was evolved that was simple to construct and fulfilled the clinical requirements for a wide range of patients while providing maximum relief of high-pressure points. The design was subsequently taken up commercially. Images Fig 3 PMID:509176

  1. Fast pyrolysis of biomass in fluidized bed reactor UNICAMP, Brazil: problems, causes and solutions; Pirolise rapida de biomassa em reator de leito fluidizado UNICAMP-Brasil: problemas, causas e solucoes

    Energy Technology Data Exchange (ETDEWEB)

    Mesa Perez, Juan Miguel; Marin Mesa, Henry Ramon [Bioware Tecnologia, Campinas, SP (Brazil); Rocha, Jose Dilcio; Olivares Gomez, Edgardo [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico; Cortez, Luis Augusto Barbosa; Shimabukuro, Fabio Rodrigo; Vallin, Marco Jim Gui [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola

    2006-07-01

    The fluidized bed reactor developed by the researchers of the UNICAMP in the installations of the Sugar Cane Technology Center (CTC), in Piracicaba-SP, is the first reactor of biomass fast pyrolysis in Brazil to produce bio-oil. In this work the problems of operation with the reactor in functioning are presented as the emptying of gases produced in the pyrolysis by means of the biomass feeding system, the block of the thread of biomass feeding, the inert material sintering in the bed, etc. The possible causes are described. Thus it, the first ones could be solved, either by the reduction of the height of the inert bed, or by the increase of the wadding percentage of the thread, among others. These results of the exploratory tests make possible the steady work of the plant, greater knowledge of the phenomena that occur during the fast pyrolysis in flutizide bed, as well as the establishment of adjusted levels for the identified independent factors during the remaining experimental works. (author)

  2. Colgajo en hacha de tensor de fascia lata para úlceras por presión trocantereas Hatchet-Shaped fascia lata tensor flap for the treatment of trochanteric pressure sores

    Directory of Open Access Journals (Sweden)

    W. Calderón

    2010-12-01

    Full Text Available Las úlceras trocantéreas por presión representan un problema importante a nivel extra e intrahospitalario. Existen múltiples opciones terapéuticas, ya sean colgajos randomizados, musculocutáneos, fasciocutáneos o libres. Presentamos la técnica quirúrgica del colgajo en hacha de tensor de fascia lata para el tratamiento de esta patología. Consiste en el diseño de un colgajo en V con irrigación por su base superior, que contacta con la úlcera por uno de sus extremos, simulando la forma de un hacha. Resecamos la úlcera hasta obtener un lecho vital, resecando además el hueso prominente dicho hasta un plano en que se visualice tejido sano. Levantamos y rotamos el colgajo cubriendo el defecto. Finalmente se realiza el cierre primario en VY sin tensión. La zona donante permite un cierre primario sin tensión. Mantenemos drenajes durante 10 días. Este colgajo permite obtener una buena cobertura para úlceras trocantéreas por decúbito con un adecuado resultado cosmético. Recogemos una casuística de 17 úlceras tratadas mediante el colgajo descrito; como complicaciones se presentaron 3 seromas, resueltos con sistema de cierre con presión negativa externa e interna; 2 casos de dehiscencia de sutura y 2 hematomas resueltos en pabellón de cirugía. Creemos pertinente conocer este colgajo que debe estar siempre presente dentro de las posibilidades terapéuticas para pacientes con úlceras trocantereas por decúbito.The trochanteric pressure sore it´s an important intra and extrahospitalary problem. There are different therapeutic options for this pathology, for example random, musculocutaneous, fasciocutaneous or free flaps. We present the hatchet-shaped fascia lata tensor flap to treat this kind of lesions. We design a V flap with irrigation in the superior base, having one of the extreme in contact with the sore. The shape of the flap is a hatchet. It´s important to get a vital bed resecting affected tissues and prominent bone; then

  3. Antioxidants for preventing and reducing muscle soreness after exercise.

    Science.gov (United States)

    Ranchordas, Mayur K; Rogerson, David; Soltani, Hora; Costello, Joseph T

    2017-12-14

    Muscle soreness typically occurs after intense exercise, unaccustomed exercise or actions that involve eccentric contractions where the muscle lengthens while under tension. It peaks between 24 and 72 hours after the initial bout of exercise. Many people take antioxidant supplements or antioxidant-enriched foods before and after exercise in the belief that these will prevent or reduce muscle soreness after exercise. To assess the effects (benefits and harms) of antioxidant supplements and antioxidant-enriched foods for preventing and reducing the severity and duration of delayed onset muscle soreness following exercise. We searched the Cochrane Bone, Joint and Muscle Trauma Group Specialised Register, the Cochrane Central Register of Controlled Trials, MEDLINE, Embase, SPORTDiscus, trial registers, reference lists of articles and conference proceedings up to February 2017. We included randomised and quasi-randomised controlled trials investigating the effects of all forms of antioxidant supplementation including specific antioxidant supplements (e.g. tablets, powders, concentrates) and antioxidant-enriched foods or diets on preventing or reducing delayed onset muscle soreness (DOMS). We excluded studies where antioxidant supplementation was combined with another supplement. Two review authors independently screened search results, assessed risk of bias and extracted data from included trials using a pre-piloted form. Where appropriate, we pooled results of comparable trials, generally using the random-effects model. The outcomes selected for presentation in the 'Summary of findings' table were muscle soreness, collected at times up to 6 hours, 24, 48, 72 and 96 hours post-exercise, subjective recovery and adverse effects. We assessed the quality of the evidence using GRADE. Fifty randomised, placebo-controlled trials were included, 12 of which used a cross-over design. Of the 1089 participants, 961 (88.2%) were male and 128 (11.8%) were female. The age range for

  4. Decubitus grade IV (deep pressure sore) with intact skin in a patient with spinal cord injury

    NARCIS (Netherlands)

    Theunissen, C.C.W.; Zeilstra, J.T.; van Voorst Vader, P.C.; Kardaun, S.H.; Leeman, F.W.J.

    2006-01-01

    Even with intact skin the possibility of pressure sores should not be dismissed. Early recognition of a pressure sore is important for adequate treatment and prevention of progression. Multidisciplinary intervention is essential. A wheelchair patient with spinal cord injury is described, who

  5. Evaluation of blood and serum markers in spinal cord injured patients with pressure sores.

    Science.gov (United States)

    Gurcay, Eda; Bal, Ajda; Gurcay, Ahmet G; Cakci, Aytul

    2009-03-01

    To evaluate blood and serum markers in traumatic spinal cord injured (SCI) patients, with and without pressure sores. This cross-sectional study was performed at the Ministry of Health Diskapi Yildirim Beyazit, and Numune Education and Research Hospitals, Ankara, Turkey, from 2006-2008. A total of 23 SCI patients with pressure sores (group I) and a control group of 25 SCI patients without pressure sores (group II) were evaluated. Characteristics of sores were examined with respect to duration, location, grade, tissue types, surface area, and exudate amount. Recorded laboratory parameters included erythrocyte sedimentation rates (ESR), C-reactive protein (CRP), hemoglobin (Hb), hematocrit (Htc), lymphocytes, white blood cells (WBC), red blood cells (RBC), serum iron, transferrin, total iron-binding capacity (TIBC), ferritin, total protein, albumin, vitamin B12, and zinc. The most common pressure sore location was the sacrum (38%). Compared to the control group, the patients with pressure sores showed anemia with reduced serum iron, transferrin, TIBC, and increased ferritin. They also had increased ESR, CRP, and WBC and reduced lymphocytes, total protein, albumin and zinc. Statistically significant correlations were found between CRP, Hb, Htc, lymphocytes, RBC, WBC, and serum protein levels, and grade of pressure sores. Clinicians should regularly screen patients with respect to blood and serum markers, in order to determine any risks for pressure sores, and they should perform immediate preventive measures based on the patient's condition.

  6. [A scale for the assessment of the risk of pressure sores in paediatric intensive care].

    Science.gov (United States)

    Weigel, Virginie

    2014-01-01

    Pressure sores are a frequent complication in paediatric intensive care. A multi-disciplinary nursing team has drawn up an assessment scale for the risk of pressure sores and has put in place guidelines for caring for children in intensive care. Prevention actions are thereby adapted to each young patient.

  7. Cost analysis of surgically treated pressure sores stage III and IV.

    NARCIS (Netherlands)

    Filius, A.; Damen, T.H.; Schuijer-Maaskant, K.P.; Polinder, S.; Hovius, S.E.R.; Walbeehm, E.T.

    2013-01-01

    Health-care costs associated with pressure sores are significant and their financial burden is likely to increase even further. The aim of this study was to analyse the direct medical costs of hospital care for surgical treatment of pressure sores stage III and IV. We performed a retrospective chart

  8. Hip fracture surgeries

    Science.gov (United States)

    ... clearly. Sometimes, surgery can make this problem worse. Pressure sores ( pressure ulcers or bed sores) from being in bed or ... the hospital for 3 to 5 days. Full recovery will take from 3 to 4 months to ...

  9. Flurbiprofen microgranules for relief of sore throat: a randomised, double-blind trial

    Science.gov (United States)

    Russo, Marc; Bloch, Mark; de Looze, Fred; Morris, Christopher; Shephard, Adrian

    2013-01-01

    Background Many people with sore throat seek, and are often inappropriately prescribed, antibiotics. Aim The objective of this study was to determine the analgesic efficacy of flurbiprofen 8.75 mg microgranules versus placebo. These microgranules are a possible alternative treatment for patients with sore throat due to upper respiratory tract infection (URTI). Design and setting Randomised, double-blind, placebo-controlled, multiple-dose study conducted at eight primary care sites in Australia. Method Participants with sore throat of onset within the past 4 days received either flurbiprofen 8.75 mg microgranules or non-medicated placebo microgranules. Throat soreness, difficulty in swallowing, sore throat pain intensity, sore throat relief, oral temperature, and treatment benefits were all assessed at regular intervals. Result Of 373 patients from eight centres, 186 received flurbiprofen 8.75 mg microgranules and 187 received placebo microgranules (intent-to-treat population). Throat soreness was significantly reduced over the first 2 hours after the first dose. Reductions in difficulty in swallowing were observed at all time points from 5 to 360 minutes after the first dose, after taking flurbiprofen microgranules versus placebo. Sore throat relief was also evident at 1 minute and lasted for at least 6 hours. The multiple-dose efficacy results showed reduction of difficulty in swallowing at the end of days 1–3 and sore throat relief at the end of day 1. Conclusion Microgranules containing flurbiprofen 8.75 mg provided fast and effective relief from sore throat due to URTI and represent an alternative treatment option to antibiotic therapy. PMID:23561694

  10. Cost analysis of surgically treated pressure sores stage III and IV.

    Science.gov (United States)

    Filius, A; Damen, T H C; Schuijer-Maaskant, K P; Polinder, S; Hovius, S E R; Walbeehm, E T

    2013-11-01

    Health-care costs associated with pressure sores are significant and their financial burden is likely to increase even further. The aim of this study was to analyse the direct medical costs of hospital care for surgical treatment of pressure sores stage III and IV. We performed a retrospective chart study of patients who were surgically treated for stage III and IV pressure sores between 2007 and 2010. Volumes of health-care use were obtained for all patients and direct medical costs were subsequently calculated. In addition, we evaluated the effect of location and number of pressure sores on total costs. A total of 52 cases were identified. Average direct medical costs in hospital were €20,957 for the surgical treatment of pressure sores stage III or IV; average direct medical costs for patients with one pressure sore on an extremity (group 1, n = 5) were €30,286, €10,113 for patients with one pressure sore on the trunk (group 2, n = 32) and €40,882 for patients with multiple pressure sores (group 3, n = 15). The additional costs for patients in group 1 and group 3 compared to group 2 were primarily due to longer hospitalisation. The average direct medical costs for surgical treatment of pressure sores stage III and IV were high. Large differences in costs were related to the location and number of pressure sores. Insight into the distribution of these costs allows identification of high-risk patients and enables the development of specific cost-reducing measures. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  11. The characteristics of bed agglomeration during fluidized bed combustion of eucalyptus bark

    International Nuclear Information System (INIS)

    Chaivatamaset, Pawin; Tia, Suvit

    2015-01-01

    The bed agglomeration behaviors were investigated experimentally when eucalyptus bark was burning tested in a laboratory scale fluidized bed reactor. The focuses of this work were the influences of operating conditions and bed materials on the bed agglomeration tendency and the elucidation in the behaviors of fuel inorganic elements and the governing mode of the agglomeration. It was found that the defluidization caused by the bed agglomeration was clearly detectable from the decrease in measured bed pressure. The growth of bed particle and accumulation of agglomerates during combustion provided the partial to complete defluidization. The defluidization was promoted by the increase of bed temperature and bed particle size, and the decrease of fluidizing air velocity. The SEM-EDS analyses revealed that the bed agglomeration was mainly attributed to the formation of potassium silicate compounds as liquid phase during the combustion. This was initiated by the chemical reaction between the bed particle and the released ash constituents. In this study, the inorganic migration from fuel particle to bed particle was likely dominated by the condensation/reaction. The thermodynamic examination by ternary phase diagram analysis corroborated that the liquid phase formation of the ash derived materials controlled the agglomeration. The alumina sand prevented the bed agglomeration since it was inactive in the formation of viscous molten substances during combustion at the observed temperatures. - Highlights: • The behaviors of bed agglomeration were studied during the fluidized bed combustion of eucalyptus bark. • The increase in bed temperature and sand size, and the decrease of air velocity promoted bed defluidization. • The formation of molten potassium silicate compounds conduced to the bed agglomeration. • Condensation/reaction was the dominant inorganic migration mechanism from fuel particle to bed particle. • The alumina sand prevented effectively the bed

  12. Delayed onset muscle soreness : treatment strategies and performance factors.

    Science.gov (United States)

    Cheung, Karoline; Hume, Patria; Maxwell, Linda

    2003-01-01

    Delayed onset muscle soreness (DOMS) is a familiar experience for the elite or novice athlete. Symptoms can range from muscle tenderness to severe debilitating pain. The mechanisms, treatment strategies, and impact on athletic performance remain uncertain, despite the high incidence of DOMS. DOMS is most prevalent at the beginning of the sporting season when athletes are returning to training following a period of reduced activity. DOMS is also common when athletes are first introduced to certain types of activities regardless of the time of year. Eccentric activities induce micro-injury at a greater frequency and severity than other types of muscle actions. The intensity and duration of exercise are also important factors in DOMS onset. Up to six hypothesised theories have been proposed for the mechanism of DOMS, namely: lactic acid, muscle spasm, connective tissue damage, muscle damage, inflammation and the enzyme efflux theories. However, an integration of two or more theories is likely to explain muscle soreness. DOMS can affect athletic performance by causing a reduction in joint range of motion, shock attenuation and peak torque. Alterations in muscle sequencing and recruitment patterns may also occur, causing unaccustomed stress to be placed on muscle ligaments and tendons. These compensatory mechanisms may increase the risk of further injury if a premature return to sport is attempted.A number of treatment strategies have been introduced to help alleviate the severity of DOMS and to restore the maximal function of the muscles as rapidly as possible. Nonsteroidal anti-inflammatory drugs have demonstrated dosage-dependent effects that may also be influenced by the time of administration. Similarly, massage has shown varying results that may be attributed to the time of massage application and the type of massage technique used. Cryotherapy, stretching, homeopathy, ultrasound and electrical current modalities have demonstrated no effect on the alleviation of

  13. [Plastic surgery treatment techniques for interdisciplinary therapy of pressure sores].

    Science.gov (United States)

    Müller, Karin; Becker, Frederic; Pfau, Matthias; Werdin, Frank

    2017-06-01

    Pressure sores in geriatric patients represent a challenge for all disciplines involved in the treatment process; however, the prerequisite for successful treatment is the elaboration of an interdisciplinary treatment concept. The treatment goals should be adapted to the individual needs of the patients including the life situation, general condition and local findings. In addition to general basic operative techniques, such as wound cleansing and conditioning, plastic and reconstructive surgery provides a wide range of highly specialized operative techniques for the treatment of these patients by which a definitive defect coverage can be achieved. The aim of this article is to raise awareness for these complex and highly specialized procedures for all disciplines participating in the treatment in order to improve the interdisciplinary cooperation and ultimately the quality of treatment.

  14. [Prescribing antibiotics for sore throat: a persistent habit].

    Science.gov (United States)

    Damoiseaux, Roger A M J; Venekamp, Roderick P

    2015-01-01

    Recently the revision of the guideline of the Dutch College of General Practitioners on sore throat has been published. Again, one of the key messages is restricting the use of antibiotics. In the Netherlands general practitioners prescribe antibiotics in 50% of cases of tonsillitis. Although there has been a decrease in the number of antibiotic prescriptions for tonsillitis in the last 30 years, they are still being prescribed twice as often as is recommended by the guideline. The beliefs of both patient and doctor play an important role in prescribing and better communication might help to improve the situation. Public campaigns can also help by providing the best knowledge on the effectiveness of antibiotics to the public.

  15. Parasacral Perforator Flaps for Reconstruction of Sacral Pressure Sores.

    Science.gov (United States)

    Lin, Chin-Ta; Chen, Shih-Yi; Chen, Shyi-Gen; Tzeng, Yuan-Sheng; Chang, Shun-Cheng

    2015-07-01

    Despite advances in reconstruction techniques, pressure sores continue to present a challenge to the plastic surgeon. The parasacral perforator flap is a reliable flap that preserves the entire contralateral side as a future donor site. On the ipsilateral side, the gluteal muscle itself is preserved and all flaps based on the inferior gluteal artery are still possible. We present our experience of using parasacral perforator flaps in reconstructing sacral defects. Between August 2004 and January 2013, 19 patients with sacral defects were included in this study. All the patients had undergone surgical reconstruction of sacral defects with a parasacral perforator flap. The patients' sex, age, cause of sacral defect, flap size, flap type, numbers of perforators used, rotation angle, postoperative complications, and hospital stay were recorded. There were 19 parasacral perforator flaps in this series. All flaps survived uneventfully except for 1 parasacral perforator flap, which failed because of methicillin-resistant Staphylococcus aureus infection. The overall flap survival rate was 95% (18/19). The mean follow-up period was 17.3 months (range, 2-24 months). The average length of hospital stay was 20.7 days (range, 9-48 days). No flap surgery-related mortality was found. Also, there was no recurrence of sacral pressure sores or infected pilonidal cysts during the follow-up period. Perforator-based flaps have become popular in modern reconstructive surgery because of low donor-site morbidity and good preservation of muscle. Parasacral perforator flaps are durable and reliable in reconstructing sacral defects. We recommend the parasacral perforator flap as a good choice for reconstructing sacral defects.

  16. The Effect of Pharyngeal Packing during Nasal Surgery on the Incidence of Post Operative Nausea, Vomiting, and Sore Throat

    Directory of Open Access Journals (Sweden)

    Ali Karbasfrushan

    2014-10-01

    Full Text Available Introduction: Nausea and vomiting after ear, nose and throat (ENT surgery is one of the most common and notable problems facing anesthesiologists in this area. This study was conducted to determine the effect of a pharyngeal pack on the severity of nausea, vomiting, and sore throat among patients after ear, pharynx, and throat surgeries.   Materials and Methods: This randomized clinical study was performed in 140 patients (61 men and 79 women; age range, 20–40 years who had undergone nasal surgery in 2010. Patients were divided into two groups: the first group were treated using a pharyngeal pack (case group and the second group were managed without a pharyngeal pack (control group. Statistical analysis was performed using the Chi-square test and the Mann-Whitney U test. SPSS software was used for data analysis.   Results: The mean severity of nausea and vomiting in the two groups was 2.057, 1.371 and 1.100, respectively, with no significant differences between groups. However, the mean severity of sore throat was 1.714 in the group with the pharyngeal pack and 1.385 in the group without pharyngeal pack (P=0.010.   Conclusion:  Not only does a pharyngeal pack in ENT surgery not reduce the extent and severity of nausea and vomiting, but it also increases the severity of sore throat in patients when leaving the recovery room and discharging hospital.

  17. Oxidative stress and acute-phase response in patients with pressure sores.

    Science.gov (United States)

    Cordeiro, Maria Bernarda Cavalcanti; Antonelli, Elida Juliana; da Cunha, Daniel Ferreira; Júnior, Alceu Afonso Jordão; Júnior, Virmondes Rodrigues; Vannucchi, Helio

    2005-09-01

    We investigated the relation between oxidative stress and the occurrence of the acute-phase response with serum ascorbic acid and alpha-tocopherol levels in patients with pressure sores. The following groups of patients were studied: 1) those who had patients with pressure sores, 2) those who had pneumonia, and 3) those who did not develop pressure sores or any type of infection (control). Concentrations of total proteins, albumin, creatinine, iron, ferritin, transferrin, C-reactive protein, alpha1-acid glycoprotein, total iron-binding capacity, ascorbic acid, alpha-tocopherol, and malondialdehyde were measured during the first days of hospitalization. Albumin concentrations were significantly lower (P pressure sores compared with controls. Concentrations of ascorbic acid and alpha-tocopherol were significantly decreased (P pressure sores or infection, whereas malondialdehyde concentrations were significantly increased (P pressure sores and 10 of 12 patients (83.33%) with pneumonia presented serum ascorbic acid concentrations below the reference value (34 to 91 micromol/L). Concentrations of ascorbic acid and alpha-tocopherol versus malondialdehyde were significantly correlated in the three patient groups (r = -0.44, P pressure sores and acute infection present a systemic inflammatory response accompanied by an increase in lipid peroxidation that is associated with decreased serum ascorbic acid and alpha-tocopherol levels, suggesting that these patients may be at risk for important nutritional deficiencies.

  18. [Primary investigation on fumigation and moxibustion in treatment ulcer and sore of yin syndrome].

    Science.gov (United States)

    Zhu, Chao-Jun; Zhang, Zhao-Hui; Ma, Jing; Li, Pin-Chuan; Liu, Xian-Zhou; Yin, Yue; Tian, Ying

    2011-09-01

    To explore the fumigation and moxibustion therapy in treatment of ulcer and sore of yin syndrome. The fumigation and moxibustion therapy is the combination of fumigation and moxibustion, in which, smoking fumigation is provided with warming effect and the actions as moxibustion. This therapy works on the efficacy of both fumigation and moxibustion. In treatment, different herbal medicines can be selected flexibly, acting on dispersing yin and rescuing yang. The fumigation and moxibustion therapy can drain toxin and remove ulcer and sore. It contributes to the treatment of boils and chronic sores of yin syndrome and promotes wound healing.

  19. Evaluation of the effectiveness of kinesiotaping in reducing delayed onset muscle soreness of the biceps brachii

    Directory of Open Access Journals (Sweden)

    Boguszewski Dariusz

    2016-07-01

    Full Text Available biological regeneration in athletes. The aim of this study was to evaluate the effectiveness of the application of lymphatic kinesiotaping in reducing delayed onset muscle soreness of biceps brachii.

  20. Delayed onset muscle soreness: No pain, no gain? The truth behind ...

    African Journals Online (AJOL)

    Delayed onset muscle soreness (DOMS) is muscle pain and stiffness that develops ... limited success in reducing the symptoms.1,4-6 The DOMS phenomenon ... Nutritional supplementation (antioxidants and L-carnitine) shows promise, but ...

  1. Diabetes: Good Diabetes Management and Regular Foot Care Help Prevent Severe Foot Sores

    Science.gov (United States)

    Amputation and diabetes: How to protect your feet Good diabetes management and regular foot care help prevent severe foot sores that ... and may require amputation. By Mayo Clinic Staff Diabetes complications can include nerve damage and poor blood ...

  2. ASPECTS REGARDING THE EFFECT OF ANTIINFLAMMATORY DRUGS ON DELAYED ONSET MUSCLE SORENESS

    OpenAIRE

    Honceriu C.; Hagiu B.A.

    2013-01-01

    The objectives of the study are to investigate the effects of using Diclofenac ointment for delayed onset muscle soreness. The research has been conducted on two groups of junior football players, males, the number of 9 each (control and treated), which has been induced by this type of muscle soreness with specific exercises. The treated group used Diclofenac gel for the relief of musculoskeletal pain. The evaluation of values of muscular strength (Squat Jump, Jump Countermovement, Free Jump,...

  3. Cutaneous flaps in the treatment of 338 pressure sores: a better choice.

    Science.gov (United States)

    Greco, Manfredi; Marchetti, Francesco; Tempesta, Massimo; Ruggiero, Marco; Marcasciano, Marco; Carlesimo, Bruno

    2013-01-01

    Muscular flaps are considered by many surgeons as a treatment of choice for pressure sores. Nevertheless fasciocutaneous and adipofascial flaps are less sensitive to ischemia, more resistant to pressure and have higher mechanical resistance. The aim of this study is to evaluate the results of our integrated rehabilitative and surgical protocol in pressure sore management based on the use of cutaneous flaps. Since 1998, we treated 338 pressure sores (PS) in 195 patients (120 males; 75 females), 189 patients were affected by paraplegia and tetraplegia and 6 of them by neurological disorders. Ninety sacral, 156 ischiatic, 75 trochanteric, 9 calcanean and 8 sores of the iliac-crest were succesfully treated. All showed an involvement of the bone element, with osteitis and/or periosteitis. 14 cases of trocanteric sores showed a deeper bone involvement, with evidences of osteomyelitis. Follow up ranges from 7 years to 2 months. Median time for wound healing was 18 days. The use of fasciocutaneous flaps, as an alternative to the traditional muscolocutaneous flaps in the treatment of pressure sores leads to good and statistically comparable, healing rate, time and incidence of complications. Reconstructive plastic surgery as is a decisive factor to reach a good rehabilitative outcome, minimizing the time of rehabilitation with a following decrease of hospitalization costs. In spinal cord injured patients, surgical treatment of pressure sores is not proposed as the main procedure, but it is an important stage during the natural history of pressure sores. Cutaneous, adipofascial and fasciocutaneous flaps are less invasive, of a relatively easy execution, provided by a reliable vascular pedicle and they could be "re-used" in case of recurrences.

  4. [Urinary incontinence as a risk factor for pressure sores does not withstand a critical examination].

    Science.gov (United States)

    Krause, Tom; Anders, Jennifer; von Renteln-Kruse, Wolfgang

    2005-10-01

    The association between urinary incontinence and pressure sores is put down to various causes. Most frequently urinary wet and following maceration of the skin are mentioned. However, it is possible that urinary incontinence is only an indicator for other risk factors or a measure of the need for care without any causal relation to pressure sores. There are hardly any controlled or randomised studies; this lack of scientific evidence is problematic. Based on a case-control-study including data of 200 patients as well as on the existing models of explanation, the following study tries to examine critically the connections between pressure sores and urinary incontinence. Out of the patients in our study population 97.5 percent were incontinent. Different categories of the risk factor urinary incontinence and different dichotomisations have led to different statistical results. Statements concerning the connection between urinary incontinence and pressure sores have to be interpreted critically. The dependence of urinary incontinence on other risk factors such as patients' need for care or compliance suggests that the causal connection to pressure sores be not reduced to the influence of wetness. We advise to research connections between urinary incontinence and pressure sores in a methodologically appropriate setting.

  5. Treatment of ischial pressure sores with both profunda femoris artery perforator flaps and muscle flaps.

    Science.gov (United States)

    Kim, Chae Min; Yun, In Sik; Lee, Dong Won; Lew, Dae Hyun; Rah, Dong Kyun; Lee, Won Jai

    2014-07-01

    Reconstruction of ischial pressure sore defects is challenging due to extensive bursas and high recurrence rates. In this study, we simultaneously applied a muscle flap that covered the exposed ischium and large bursa with sufficient muscular volume and a profunda femoris artery perforator fasciocutaneous flap for the management of ischial pressure sores. We retrospectively analyzed data from 14 patients (16 ischial sores) whose ischial defects had been reconstructed using both a profunda femoris artery perforator flap and a muscle flap between January 2006 and February 2014. We compared patient characteristics, operative procedure, and clinical course. All flaps survived the entire follow-up period. Seven patients (50%) had a history of surgery at the site of the ischial pressure sore. The mean age of the patients included was 52.8 years (range, 18-85 years). The mean follow-up period was 27.9 months (range, 3-57 months). In two patients, a biceps femoris muscle flap was used, while a gracilis muscle flap was used in the remaining patients. In four cases (25%), wound dehiscence occurred, but healed without further complication after resuturing. Additionally, congestion occurred in one case (6%), but resolved with conservative treatment. Among 16 cases, there was only one (6%) recurrence at 34 months. The combination of a profunda femoris artery perforator fasciocutaneous flap and muscle flap for the treatment of ischial pressure sores provided pliability, adequate bulkiness and few long-term complications. Therefore, this may be used as an alternative treatment method for ischial pressure sores.

  6. Treatment of ischial pressure sores using a modified gracilis myofasciocutaneous flap.

    Science.gov (United States)

    Lin, Haodong; Hou, Chunlin; Chen, Aimin; Xu, Zhen

    2010-04-01

    Despite the availability of a variety of flap reconstruction options, ischial pressure sores continue to be the most difficult pressure sores to treat. This article describes a successful surgical procedure for the coverage of ischial ulcers using a modified gracilis myofasciocutaneous flap. From August 2000 to April 2004, 12 patients with ischial sores were enrolled in the study. All patients underwent early aggressive surgical debridement followed by surgical reconstruction with a modified gracilis myofasciocutaneous flap. The follow-up period ranged from 13 to 86 months, with a mean of 44 months. Overall, 91.7% of the flaps (11 of 12) survived primarily. Partial flap necrosis occurred in one patient. Primary wound healing occurred without complications at both the donor and recipient sites in all cases. In one patient, grade II ischial pressure sores recurred 13 months after the operation. There was no recurrence in other 11 patients. A modified gracilis myofasciocutaneous flap provides a good cover for ischial pressure sores. Because it is easy to use and has favorable results, it can be used in the primary treatment for large and deep ischial pressure sores. Copyright Thieme Medical Publishers.

  7. The evaluation of daily living activities, pressure sores and risk factors.

    Science.gov (United States)

    Aydın, Gökçen; Mucuk, Salime

    2015-01-01

    This study was conducted to assess daily living activities, pressure sores and risk factors. This was a descriptive study. The study was conducted at a rehabilitation center with 188 individuals participating in the study. Data were collected with a questionnaire form, Activities of Daily Living Scale (ADLS), Instrumental Activities of Daily Living Scale (IADLS) and Braden Risk Assessment Scale (BRAS). Among the participants, 48.9% were dependent according to activities of daily living and 71.8% were dependent on instrumental activities of daily living. It was noted that 4.8% had pressure sores and 38.8% were at high risk. A strong and positive correlation was found among ADLS, IADLS, and BRAS scores (p pressure sores (p pressure sores. Individuals who are treated at rehabilitation centers should be periodically assessed in terms of risk. Pressure sore development can be prevented with appropriate nursing interventions. To reduce the risk of developing pressure sores, nurses should describe the individual's degree of dependency according to ADLS and IADLS and initiate preventive nursing care. © 2014 Association of Rehabilitation Nurses.

  8. [Indication of sclerotherapy in the treatment of ischiatic pressure sore: about 13 cases].

    Science.gov (United States)

    Bahé, L; Prud'homme, A; Penaud, A; Formé, N; Zakine, G

    2012-12-01

    Ischiatic pressure sore is a common pathology of the paraplegic patient. Usually treated after medical therapy, with fasciocutaneous or musculocutaneous local flaps, despite this treatment the recurrence rate is high. Sclerotherapy, injection of pure ethanol in the cavity of the pressure sore could be an interesting solution in the armentarium of the plastic surgeon in some indications. Sclerotherapy was used for 13 patients in the plastic surgery department to treat ischiatic pressure sores with a cavity, beneath the defect. The mean length of stay was 24 days. The ischiatic pressure sore was completely healed with no skin defect or cavity for nine patients (65%). For two patients, there was a delay of healing of the skin defect but no cavity beneath. There were two early recurrences of the pressure sore. They were treated by sclerotherapy with a complete recovery in 2 months with simple hydrocolloid dressings. The mean post op follow-up was 14,6 months (4 to 24). Only one recurrence was observed after 12 months. The injection of pure ethanol in the cavity of specifics ischiatics pressure sores is a simple, fast and effective technique with a good and stable long term wound healing. The mean length of stay is shorter and the recurrence rate is equivalent to other techniques. Copyright © 2009 Elsevier Masson SAS. All rights reserved.

  9. Gargling with Ketamine Attenuates the Postoperative Sore Throat

    Directory of Open Access Journals (Sweden)

    A Rudra

    2009-01-01

    Full Text Available Postoperative sore throat (POST is a common complication of anaesthesia with endotracheal tube that affects patient satisfaction after surgery. Therefore, this complication remains to be resolved in patients undergoing endotra-cheal intubation. The aim of the study was to compare the effectiveness of ketamine gargles with placebo in prevent-ing POST after endotracheal intubation. Forty patients scheduled for elective surgery under general anaesthesia were randomized into: Group C, water 30 ml; Group K, ketamine 50 mg in water 29 ml. Patients were asked to gargle this mixture for 40 seconds, 5 minutes before induction of anaesthesia. POST was graded at 4, 8 and 24 hours after operation on a four-point scale (0-3. In the Control group POST occurred more frequently, when compared with patients belonging to Ketamine group, at 4, 8, and 24 hours and significantly more patients suffered severe POST in Control group at 8 and 24 hours compared with Ketamine group (P< 0.05. We demonstrated that gargling with ketamine significantly attenuated POST, with no drug-related side effects were observed.

  10. Marjolin's Ulcer Complicating a Pressure Sore: The Clock is Ticking.

    Science.gov (United States)

    Khan, Kamran; Giannone, Anna Lucia; Mehrabi, Erfan; Khan, Ayda; Giannone, Roberto E

    2016-02-22

    Malignant degeneration in any chronic wound is termed a Marjolin's ulcer (MU). The overall metastatic rate of MU is approximately 27.5%. However, the prognosis of MU specific to pressure sores is poor, with a reported metastatic rate of 61%. This is due to insidious, asymptomatic malignant degeneration, a lack of healthcare provider awareness, and, ultimately, delayed management. An 85-year-old white male was noted by his wound-care nurse to have a rapidly developing growth on his lower back over a period of 4 months. There was history of a non-healing, progressive pressure ulcer of the lower back for the past 10 years. On examination, there was a 4 × 4 cm pressure ulcer of the lower back, with a superimposed 1.5 × 2 cm growth in the superior region. There was an absence of palpable regional lymphadenopathy. Punch biopsy revealed squamous cell carcinoma consistent with Marjolin's ulcer. The ulcer underwent excision with wide margins, and a skin graft was placed. Due to the prompt recognition of an abnormality by the patient's wound-care nurse, metastasis was not evident on imaging. There are no signs of recurrence at 1-year follow-up. Marjolin's ulcer has a rapid progression from local disease to widespread metastasis. Therefore, it is essential that wound-care providers are aware of the clinical signs and symptoms of malignant degeneration in chronic wounds.

  11. Effect of St.John's wort (Hypericum perforatum) oily extract for the care and treatment of pressure sores; a case report.

    Science.gov (United States)

    Yücel, Ali; Kan, Yüksel; Yesilada, Erdem; Akın, Onat

    2017-01-20

    Topical formulations such as oily extracts or ointments prepared with the flowering aerial parts of St. John's wort (Hypericum perforatum L., Hypericaceae) have been used in the management of a wide range dermatological problems including superficial wounds and burns, bruises, contusions and many others in the worldwide traditional medicines. This is the first case study reporting the beneficial effects of an oily extract of St. John's wort in the treatment of pressure sores in a intensive care unit (ICU) patient. The oily extract of St. John's wort was applied to a volunteer patient at ICU daily for forty successive days for wound care and treatment. Healing status was monitored macroscopically by measuring the wound size and stages at certain intervals as well as histopathological evaluation of the tissue sections taken at the initial and final dates of treatment. Evaluation of the results obtained from the macroscopical and histopathological experimentation have shown that oily extract of St. John's wort provided significant efficacy for the treatment of pressure sore wounds. St. John's wort oily extract may be suggested as a cost-effective option for the prevention or treatment of pressure sores in ICU patients. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. Reduced ash related operational problems (slagging, bed agglomeration, corrosion and fouling) by co-combustion biomass with peat; Minskade askrelaterade driftsproblem (belaeggning, slaggning, hoegtemperatur-korrosion, baeddagglomerering) genom inblandning av torv i biobraenslen

    Energy Technology Data Exchange (ETDEWEB)

    Oehman, Marcus; Boman, Christoffer; Erhardsson, Thomas; Gilbe, Ram; Pommer, Linda; Bostroem, Dan; Nordin, Anders; Samuelsson, Robert; Burvall, Jan

    2006-12-15

    Combustion studies were performed in both a fluidized bed (5 kW) and in an under-feed pellets burner (20 kW) to elucidate the responsible mechanisms for the positive effects on ash related operational problems (i.e. slagging, fouling, corrosion and bed agglomeration) during co-combustion of several problematic biomass with peat. Three typical carex-containing Swedish peat samples with differences in e.g. silicon-, calcium- and sulfur contents were co-fired with logging residues, willow and straw in proportions corresponding to 15-40 weight %d.s. Mixing of corresponding 20 wt-% of peat significantly reduced the bed agglomeration tendencies for all fuels. The fuel specific agglomeration temperature were increased by 150-170 deg C when adding peat to the straw fuel and approximately 70-100 deg C when adding peat to the logging residue- and the willow fuel. The increased level of calcium in the inner bed particle layer caused by the added reactive calcium from the peat and/or removing alkali in the gas phase to a less reactive particular form via sorption and/or reaction with reactive peat ash (containing calcium, silica etc.) during which larger particles (>1{mu}m) are formed where collected potassium is present in a less reactive form, is considered to be the dominated reason for the increased agglomeration temperatures during combustion of logging residues and willow. During straw combustion, the ash forming matter were found as individual ash sticky particles in the bed. The iron, sulphur and calcium content of these individual ash particles were significantly increased when adding peat to the fuel mix thereby decreasing the stickiness of these particles i.e. reducing the agglomeration tendencies. Adding peat to the relatively silicon-poor fuels (willow and logging residues) resulted in higher slagging tendencies, especially when the relative silicon rich peat fuel (Brunnskoelen) was used. However, when co-combusting peat with the relatively silicon and potassium

  13. Improving outcomes following reconstruction of pressure sores in spinal injury patients: A multidisciplinary approach.

    Science.gov (United States)

    Tadiparthi, S; Hartley, A; Alzweri, L; Mecci, M; Siddiqui, H

    2016-07-01

    Pressure sore treatment in spinal injury patients is challenging. A multidisciplinary approach with joint management by the plastic surgery and spinal injury teams was initiated at our institution in 2005 to improve patient care and surgical outcomes following reconstruction. This study assessed the surgical outcomes following reconstruction using the team approach and to compare inpatient stay and readmissions for complications before and after the multidisciplinary protocol was introduced. A retrospective review of consecutive patients in the multidisciplinary pressure sore clinic was performed. Data were collected on patient demographics, reconstructive techniques, surgical outcomes and readmission for any complications. In total, 45 patients with 60 pressure sores (grade 3 or 4) were reviewed in the joint clinic between 2005 and 2011. The majority of patients were paraplegic (78%), while the remaining 22% were tetraplegic. Ischial sores were the most common (45%) followed by trochanteric (23%) and sacral (20%) sores. Multiple sores were noted in 44% of patients. Flap reconstruction was required in 32 patients (71%); after a mean follow-up time of 33 months (range 25-72 months), there were three (9%) major complications (two recurrences of pressure sores and one sinus) and seven (22%) minor complications. After introduction of patient care pathways through the multidisciplinary approach, the rate of readmission for complications decreased from 14% to 5.5% and inpatient stay upon readmission reduced from 65 to 45 days. Implementation of a multidisciplinary approach was key to optimising surgical outcomes, achieving a low recurrence rate (6%) and reducing readmissions. Copyright © 2016 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  14. [A clinical audit on the use of medications for pressure sores, after the implementation of guidelines].

    Science.gov (United States)

    Chiari, Paolo; Fontana, Mirella; Bianchi, Tommaso; Bonzagni, Cristina; Galetti, Caterina

    2006-01-01

    Although guidelines for the management of pressure sores are widely available, their implementation is not always easy and sometimes does not produce the desired changes. To describe the results of a clinical audit aiming at assessing the appropriate use of medications for pressure sores, after the implementation of guidelines. The audit group, with an expert in assessment, a nurse expert in pressure sores, a microbiologist, a dermatologist and a chemist analysed the clinical and nursing records of all the patients with a pressure sore, discharged during the first trimester of 2005 and 2006, after the implementation of the guidelines, from wards with higher prevalence of pressure sores: geriatric, medical, intensive care, rehabilitation and post acute wards. Each documented treatment was classified as appropriate, not appropriate or "grey area", treatments inappropriate according to guidelines but not according to expert or current knowledge (e.g. poliurethane medications for heel pressure sores). After each stage, the results were returned and discussed with the involved wards. One hundred 74 patients were surveyed in 2005 and 199 in 2006, with a total of respectively 287 and 326 sores. The percentage of inappropriate treatments was 20% in 2005 and 12.8% in 2006 (OR 1.79 I.C. 95% 1.10- 2.91), while an increase of treatments considered grey area (from 7% to 13.5%) was observed. The medium number of medications used was 17.3 per lesion, in 2005 and 16.4 in 2006 with a cost respectively of 83.6 and 67.35 per lesion, but the two populations were not strictly comparable. Clinical audit is a strategy that involving doctors and nurses, may promote positive changes. The rate of inappropriate treatments (higher in areas with high turnover of nurses) can be improved with educational interventions. The identification of treatments of the grey area highlights the need of periodically revising guidelines to update their contents according to new knowledge and technologies.

  15. [Clinical application of modified upper gluteal rhomboid fasciocutaneous flap in repairing sacrococcygeal pressure sores].

    Science.gov (United States)

    Jiang, Maohua; Yang, Xiaoliang; Wei, Bangmin; Li, Yinghao

    2012-03-01

    To investigate the method and effectiveness of repairing sacrococcygeal pressure sores with modified upper gluteal rhomboid fasciocutaneous flap. Between January 2004 and March 2011, 43 patients with sacrococcygeal pressure sores were treated. There were 25 males and 18 females with an average age of 63 years (range, 38-95 years). The disease duration was 3 months to 2 years and 6 months (mean, 8.5 months). The size of pressure sores ranged from 6 cm x 5 cm to 18 cm x 13 cm. According to the extent and lesion degree of pressure scores, 23 pressure sores were rated as degree III and 20 pressure sores as degree IV. The modified upper gluteal rhomboid flap was designed, one-side upper gluteal fasciocutaneous flaps were transplanted to repair sacrococcygeal pressure sores in 19 cases and two-side flaps in 24 cases. The size of one side flap ranged from 6.5 cm x 4.5 cm to 18.0 cm x 11.5 cm. Fluid under flap occurred in 1 case and edge necrosis of the flaps in 3 cases at 7 days after operation, which were cured after drainage and dressing change; the other flaps survived, and incisions healed by first intention. All patients were followed up 6 months to 3 years with an average of 11 months. Two patients relapsed at 5 months and 8 months, respectively; the other patients had no recurrence. The color of the flaps was normal, and the appearance and elasticity of the flaps were good. The modified upper gluteal rhomboid fasciocutaneous flap has the advantages of simple design and operation, less injury, and reliable effect in repairing sacrococcygeal pressure sores.

  16. The usefulness of a clinical 'scorecard' in managing patients with sore throat in general practice

    Directory of Open Access Journals (Sweden)

    Bakare Tony MO

    2010-07-01

    Full Text Available Abstract Background Objective: To evaluate the usefulness of a clinical scorecard in managing sore throat in general practice. Design: Validation study of scorecard for sore throat with a throat swab culture used as the 'gold standard'. Setting: A solo family practice in rural New South Wales, Australia Participants: Patients attending with sore throat. Methods Patients from the age of 5 years and above presenting with the main symptom of a sore throat, and who have not had any antibiotic treatment in the previous two weeks, were invited to participate in the study. The doctor completed a scorecard for each patient participating and took a throat swab for culture. Adult patients (> 16 yrs were asked to complete a patient satisfaction questionnaire, while guardians accompanying children (5 yr to Main outcome measures: 1. Ability of a new scorecard to differentiate between bacterial and non-bacterial sore throat. 2. Patients' trust in the scorecard. Results The scorecard has a sensitivity of 93.33%, a specificity of 63.16%, a positive predictive value of 50% and a negative predictive value of 96%. The sensitivity is better than other sore throat scorecards that have been published but with a slightly lower specificity. There was a high level of patient trust in the scorecard was (85.8% agreement. Patients also trusted their doctor's judgement based on the scorecard (90.6% agreement. Conclusions As the scorecard has a high sensitivity but only a moderate specificity, this means that it is more reliable for negative results, i.e. when the result suggests a viral infection. When the result favours a bacterial sore throat, then a high sensitivity can mean that there are a number of false positives. GPs can be confident in withholding antibiotics when the scorecard indicates a viral infection.

  17. [High-grade pressure sores in frail older high-risk persons. A retrospective postmortem case-control-study].

    Science.gov (United States)

    Von Renteln-Kruse, W; Krause, T; Anders, J; Kühl, M; Heinemann, A; Püschel, K

    2004-04-01

    Some old persons at risk do develop, but others, at comparable risk, do not develop high-grade pressure sores. To evaluate potentially different risk factors, we performed a post mortem case-control study in old persons who developed high-grade pressure sores within six months until 14 days before death. Consecutive cases with pressure sores grade >/=3 and potential controls at comparably high risk for pressure sores were examined before cremation. After written informed consent had been obtained by the next relatives, all available nursing and medical records of the deceased were thoroughly evaluated. Cases and controls were matched according to age, gender, immobility, and cachexia.A total of 100 cases with 71 pressure sores grade 3 and 29 pressure sores grade 4 were compared to 100 controls with 27 pressure sores grade pressure sores in frail older high-risk persons. Sedative drug effects and impaired patient compliance with preventive and therapeutic measures may also be associated with the development of high-grade pressure sores in old persons at high risk.

  18. Ketorolac Tromethamine Spray Prevents Postendotracheal-Intubation-Induced Sore Throat after General Anesthesia

    Directory of Open Access Journals (Sweden)

    H. L. Yang

    2016-01-01

    Full Text Available Background. Postoperative sore throat is one of the major complaints of general anesthesia in the postanesthesia care unit. This prospective study investigated the preventive effect of ketorolac tromethamine spray in postendotracheal-intubation-induced sore throat after general anesthesia. Methods. Surgical patients undergoing general anesthesia with endotracheal intubation were recruited from a medical center. Patients were randomly assigned to group K (treated with 5% ketorolac tromethamine spray or group D (treated with distilled water spray. Before intubation, each endotracheal tube was sprayed with the appropriate solution by physicians over the 20 cm length of the cuff. Each group comprised 95 patients fitting the inclusion and exclusion criteria for whom complete data sets were collected. The intensity of the sore throat was measured at 1, 3, 6, and 24 h after surgery, and data were compared. Results. The two groups had similar characteristics. Postoperative sore throat was significantly less frequent in group K than in group D (p<0.001 and the pain intensity was significantly lower in group K than in group D at each time point (all p<0.001. Conclusions. This study demonstrated that preanesthesia 5% ketorolac tromethamine spray could effectively decrease postendotracheal-intubation-induced sore throat in patients undergoing general anesthesia.

  19. Vitamin C depletion and pressure sores in elderly patients with femoral neck fracture.

    Science.gov (United States)

    Goode, H. F.; Burns, E.; Walker, B. E.

    1992-01-01

    OBJECTIVE--To evaluate the contribution of specific nutritional deficiencies (as indicated by zinc; vitamin A, C, and E; albumin; and haemoglobin concentrations) to the risk of pressure sores. DESIGN--Observational cohort study. SETTING--St James's University Hospital, Leeds. SUBJECTS--21 elderly patients presenting consecutively to the orthopaedic unit with femoral neck fracture. MAIN OUTCOME MEASURE--Full thickness epidermal break over a pressure bearing surface. RESULTS--10 patients (48%) developed a pressure sore during their hospital stay. Indices of zinc status and concentrations of albumin, haemoglobin, and vitamins A and E were similar in patients who developed a pressure sore and those who did not. Mean leucocyte vitamin C concentration, however, was 6.3 (SD 2.2) micrograms/10(8) cells in patients who developed a pressure sore as compared with 12.8 (4.6) micrograms/10(8) cells in patients who did not. CONCLUSIONS--Low concentrations of leucocyte vitamin C appear to be associated with subsequent development of pressure sores in elderly patients with femoral neck fractures. PMID:1458073

  20. Detection and Isolation of Digital Dermatitis Treponemes from Bovine Pressure Sores.

    Science.gov (United States)

    Clegg, S R; Crosby-Durrani, H E; Bell, J; Blundell, R; Blowey, R W; Carter, S D; Evans, N J

    2016-05-01

    Pressure sores cause severe pain and discomfort in hospitalized people and in farmed cattle and are often infected with unknown bacteria. Pressure sores occur on the upper legs of 6-10% of recumbent cattle and are generally considered to be caused by constant pressure, commonly on bony areas of the limbs. This study analyzed pressure sores taken from the upper limbs of 14 cattle using isolation in culture and nested polymerase chain reaction (PCR) to detect treponemes associated with digital dermatitis (DD). A 100% association of DD treponemes with the pressure sores was demonstrated, but treponemes were shown not to be part of the normal skin microbiota. Immunohistochemistry showed an association of DD treponemes with lesions and particularly with the hair follicles in lesions, identifying the bacteria deep within wounds, thereby suggesting that they could contribute to lesion pathogenesis. The bacteria isolated from the pressure sore lesions were similar or identical on analysis of the 16S rRNA gene to those found in DD foot lesions in cattle, suggesting the same bacteria can infect multiple lesions. Indeed, the results of this study suggest that these spirochaetal bacteria may be expanding in host range and in their ability to colonize different tissues and contribute to a range of disease manifestations in farm animals. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Clinical physiology of bed rest

    Science.gov (United States)

    Greenleaf, John E.

    1993-01-01

    Maintenance of optimal health in humans requires the proper balance between exercise, rest, and sleep as well as time in the upright position. About one-third of a lifetime is spent sleeping; and it is no coincidence that sleeping is performed in the horizontal position, the position in which gravitational influence on the body is minimal. Although enforced bed rest is necessary for the treatment of some ailments, in some cases it has probably been used unwisely. In addition to the lower hydrostatic pressure with the normally dependent regions of the cardiovascular system, body fuid compartments during bed rest in the horizontal body position, and virtual elimination of compression on the long bones of the skeletal system during bed rest (hypogravia), there is often reduction in energy metabolism due to the relative confinement (hypodynamia) and alteration of ambulatory circadian variations in metabolism, body temperature, and many hormonal systems. If patients are also moved to unfamiliar surroundings, they probably experience some feelings of anxiety and some sociopsychological problems. Adaptive physiological responses during bed rest are normal for that environment. They are attempts by the body to reduce unnecessary energy expenditure, to optimize its function, and to enhance its survival potential. Many of the deconditioning responses begin within the first day or two of bed rest; these early responses have prompted physicians to insist upon early resumption of the upright posture and ambulation of bedridden patients.

  2. Practice Hospital Bed Safety

    Science.gov (United States)

    ... Home For Consumers Consumer Updates Practice Hospital Bed Safety Share Tweet Linkedin Pin it More sharing options ... It depends on the complexity of the bed." Safety Tips CDRH offers the following safety tips for ...

  3. Bed Bugs and Schools

    Science.gov (United States)

    Bed bugs have long been a pest – feeding on blood, causing itchy bites and generally irritating their human hosts. They are successful hitchhikers, and can move from an infested site to furniture, bedding, baggage, boxes, and clothing.

  4. Acute effects of massage or active exercise in relieving muscle soreness

    DEFF Research Database (Denmark)

    Andersen, Lars L; Jay, Kenneth; Andersen, Christoffer H

    2013-01-01

    Massage is commonly believed to be the best modality for relieving muscle soreness. However, actively warming up the muscles with exercise may be an effective alternative. The purpose of this study was to compare the acute effect of massage with active exercise for relieving muscle soreness. Twenty...... healthy female volunteers (mean age 32 years) participated in this examiner-blind randomized controlled trial (ClinicalTrials.gov NCT01478451). The participants performed eccentric contractions for the upper trapezius muscle on a Biodex dynamometer. Delayed onset muscle soreness (DOMS) presented 48 hours...... later, at which the participants (a) received 10 minutes of massage of the trapezius muscle or (b) performed 10 minutes of active exercise (shoulder shrugs 10 × 10 reps) with increasing elastic resistance (Thera-Band). First, 1 treatment was randomly applied to 1 shoulder while the contralateral...

  5. Treatment of Ischial Pressure Sores with Both Profunda Femoris Artery Perforator Flaps and Muscle Flaps

    Directory of Open Access Journals (Sweden)

    Chae Min Kim

    2014-07-01

    Full Text Available Background Reconstruction of ischial pressure sore defects is challenging due to extensive bursas and high recurrence rates. In this study, we simultaneously applied a muscle flap that covered the exposed ischium and large bursa with sufficient muscular volume and a profunda femoris artery perforator fasciocutaneous flap for the management of ischial pressure sores. Methods We retrospectively analyzed data from 14 patients (16 ischial sores whose ischial defects had been reconstructed using both a profunda femoris artery perforator flap and a muscle flap between January 2006 and February 2014. We compared patient characteristics, operative procedure, and clinical course. Results All flaps survived the entire follow-up period. Seven patients (50% had a history of surgery at the site of the ischial pressure sore. The mean age of the patients included was 52.8 years (range, 18-85 years. The mean follow-up period was 27.9 months (range, 3-57 months. In two patients, a biceps femoris muscle flap was used, while a gracilis muscle flap was used in the remaining patients. In four cases (25%, wound dehiscence occurred, but healed without further complication after resuturing. Additionally, congestion occurred in one case (6%, but resolved with conservative treatment. Among 16 cases, there was only one (6% recurrence at 34 months. Conclusions The combination of a profunda femoris artery perforator fasciocutaneous flap and muscle flap for the treatment of ischial pressure sores provided pliability, adequate bulkiness and few long-term complications. Therefore, this may be used as an alternative treatment method for ischial pressure sores.

  6. Sports Mass Age Therapy on the Reduction of Delayed Onset Muscle Soreness of the Quadriceps Femoris

    Directory of Open Access Journals (Sweden)

    Boguszewski Dariusz

    2014-12-01

    Full Text Available Purpose. Massage therapy is one of most commonly applied treatments during athletic training. The aim of this study was to assess the effectiveness of sports massage therapy on reducing post-exercise quadriceps muscle soreness. Methods. A sample of 29 women aged 24-26 years was divided into an experimental group (n = 15 receiving classic sports massage therapy and a control group (n = 14 given no treatment. An exercise session consisting of five sets of deep squat jumps was administered after which lower limb power as assessed via the vertical jump test. Muscle soreness was assessed using the visual analogue scale (VAS and exercise intensity with the Borg Rating of Perceived Exertion Scale. Subsequent measurements of lower limb power and muscle soreness were performed 24, 48, 72 and 96 h after the exercise session. Differences between the measurements were assessed by the Friedman and least significant difference tests while between-group comparisons involved the Mann-Whitney U test. Results. The largest decrease in lower limb power was observed between the first measurement after the exercise session and 24 h later (p < 0.01. The smallest decrease in power was observed in the massage group. The highest levels of muscle soreness were noted 24 h post-exercise in the massage group and 48 h post-exercise in the control group. The experimental group showed a decrease in muscle soreness in each subsequent measurement, with the results close to zero on the VAS 96 h postexercise. Conclusions. Massage therapy quickened recovery and improved muscle efficiency post-exercise and may serve as an effective treatment of muscle soreness. The analgesic effect of massage suggests it should be widely applied in sport, physical therapy and rehabilitation.

  7. Pressure Sores and Systemic Inflammatory Response Syndrome: UC Davis Quality Improvement Initiative.

    Science.gov (United States)

    Jairam, Abhishek; Song, Ping; Patel, Nirav B; Wong, Michael S

    2018-05-01

    The National Pressure Ulcer Advisory Panel estimates pressure sore care to approach $11 billion annually. It is not uncommon for these patients to present to the emergency department (ED) with a chief concern of a pressure sore, while concurrently carrying an undiagnosed infectious process that is the culprit for the acute presentation, rather than the chronic pressure injury. We aim to identify patients who met systemic inflammatory response syndrome (SIRS) criteria at ED presentation who were referred to plastic and reconstructive surgery for pressure sore debridement prior to a complete medical workup. We hypothesize that a restructuring of the ED triaging system would help conserve hospital resources, reduce costs of pressure sore management, and improve patient care and outcomes by first treating primary, underlying pathologies. This is a retrospective chart review of 36 patients who presented to the University of California, Davis Medical Center Emergency Department with a pressure sore and met SIRS criteria, but obtained a plastic surgery consult prior to a full medical workup. We defined SIRS based on standardized criteria: temperature greater than 100.4°F or less than 96.8°F, pulse rate greater than 90 beats/min, respiratory rate greater than 20 breaths/min or PaCO2 less than 32 mm Hg, white blood cell count greater than 12,000, less than 4000, or greater than 10% bands. Fifty percent of patients (18/36) met SIRS criteria at ED presentation for their pressure sores. Of these SIRS patients, 9 (50%) had a diagnosis of urinary tract infection or urosepsis, 6 (33.3%) had sepsis of undefined origin, and 3 (16.7%) had other diagnoses such as osteomyelitis or acute respiratory distress syndrome. Half of patients consulted while in the University of California, Davis Medical Center Emergency Department with pressure sores met SIRS criteria and received a plastic and reconstructive surgery consult prior to a full medical workup. We propose a new algorithm for

  8. [Randomized controlled trial on the effectiveness of Corpitolinol 60 in the prevention of pressure sores in patients undergoing surgery].

    Science.gov (United States)

    Chiari, Paolo; Giorgi, Sabina; Ugolini, Daniela; Montanari, Morena; Giudanella, Pietro; Gramantieri, Antonella; Collesi, Franca; Pau, Michelina; Smaldone, Maddalena; Matarasso, Maddalena; Mazzini, Cinzia; Russo, Francesca; Gazineo, Domenica; Fontana, Mirella; Taddia, Patrizia

    2012-01-01

    Randomized controlled trial on the effectiveness of Corpitolinol 60 in the prevention of pressure sores in surgical patients. The risk of pressure sores in surgical patients is widely recognised. The Corpitolinol 60 (Sanyréne®) applied on compressed areas seems to reduce the risk of pressure sores. To assess the efficacy of Corpitolinol 60 in preventing pressure sores in the operatory theatre. The open label randomized clinical trial was conducted in 5 operating theatres of Northen Italy. Patients were randomized to receive Corpitolinol 60 in areas undergoing compression. Experimental group and controls were treated with usual measures for preventing pressure sores. The lesions were staged according to NPUAP up to 24 hours after surgery. Three-hundred-one patients were randomized (155 in the Sanyréne® group and 143 controls). The main variables predictive of pressure sores risk (ASA class, sex, age, duration of the surgery, and BMI) were comparable across groups. At the end of the surgery 71 patients (23.8%) in the experimental group and 47 controls (30.8%) had a pressure sore (p 0.006; RR 1.81 IC95% 1.17-2.79). Twelve and 24 hours after surgery the differences between groups were not significant. The aim of reducing pressure sores was not reached for patients treated with Corpitolinol 60.

  9. [A variant of island flaps for the covering of pressure sores: the hatchet flap. Apropos of 31 cases].

    Science.gov (United States)

    Quillot, M; Lodde, J P; Pegorier, O; Reynaud, J P; Cormerais, A

    1994-08-01

    The authors propose a modification of the classical design of island flaps for cover of pressure sores, applied to gluteus maximus and tensor fascia lata muscles: the hatchet flap. 31 flaps have been used including 13 gluteus maximus superior flaps for sacral pressure sores, 9 gluteal inferior flaps for ischial pressure sores and 9 tensor fascia lata flaps for trochanteric pressure sores. A small partial necrosis and two cases of sepsis were observed in this series, but did not require surgical revision. The authors emphasize the value of this modification of the classical flap design, which preserves an even better musculocutaneous capital in these patients, who are often already multi-operated. The very rapid recovery of patients supports the authors' application of hatchet flaps to the surgery of pressure sores, and suggests the extension to other musculocutaneous flaps in the future.

  10. What is the best support surface in prevention and treatment, as of 2012, for a patient at risk and/or suffering from pressure ulcer sore? Developing French guidelines for clinical practice.

    Science.gov (United States)

    Colin, D; Rochet, J-M; Ribinik, P; Barrois, B; Passadori, Y; Michel, J-M

    2012-10-01

    The use of support surfaces in the prevention and treatment of pressure ulcers prevention is an important part of care for a patient at risk and/or suffering from sore(s). Define which support surfaces to use in prevention and treatment of at-risk and/or pressure sore patients. A systematic review of the literature querying the several Pascal Biomed, PubMed and Cochrane Library databases from 2000 through 2010. RESULTS (GRADE A): In prevention, a structured foam mattress is more efficient than a standard hospital mattress. An alternating pressure mattress is more effective than a visco-elastic mattress limiting the occurrence heel pressure ulcers, but those that do occur are more serious. A low-air-loss bed is more efficient than a mixed pulsating air mattress in prevention of heel pressure ulcers. Some types of sheepskin can reduce sacral pressure ulcer incidence in orthopedic patients. Use of an overlay on an operating table limits the occurrence of peroperative and postoperative pressure ulcers. An air-fluidized bed improves pressure ulcer healing. The data in the literature are not always relevant and do not suffice to dictate a clinician's choices. We are compelled to recognize the methodological limitations of many studies, the lack of corporate interest in conducting such studies and the relatively small number of available trials. However, the effectiveness of some support surfaces reaches a sufficient level of evidence, especially when they are associated with postural, hydration and nutritional measures. Support surfaces are recommended in prevention and treatment of patients at risk and/or already suffering from pressure ulcer, and their use should constitute part of an overall preventive or curative strategy. Copyright © 2012. Published by Elsevier Masson SAS.

  11. Komplexitet för kvalitet i lärande och undervisning: bedömning av komplexa problem och studenters resonemang

    Directory of Open Access Journals (Sweden)

    Sofia Kjellström

    2011-03-01

    Full Text Available Vi utbildar studenter för att de ska ha möjlighet att lösa mycket komplexa samhällsproblem,men hur vet vi att de har utvecklat de former av tänkande och handlande som krävs? Forskning visar att vuxna tänker, talar och handlar utifrån olika nivåer av komplexitet, och att utbildning i hög grad påverkar människors förmågor. Model of Hierarchical Complexity(MHC är en teori som beskriver hur komplext information sätts samman och hur komplext personer resonerar i en fråga, vanligtvis på någon av nivåerna konkret, abstrakt, formellt, systematiskt eller metasystematisk. Syftet med denna artikel är att introducera MHC och visa på dess relevans som verktyg inom högre utbildning. Med hjälp av teorin är det möjligt att analysera både hur komplex en uppgift är och hur studenter klarar av att lösa den, vilket speglar förståelse inom ett ämne. Med modellen som mått på komplexitet tydliggörs svårighetsgraden i det som ska läras och på vilken nivå studenterna klarar att ta till sig kunskapsinnehållet. Avslutningsvis diskuteras hur studenter kan stödjas att utvecklasina förmågor till komplext resonerande och därmed skapa kvalitet i både lärande och undervisningOne of the aims of higher education is to teach students to solve complex problems, but what is the complexity of problems and the reasoning of students? The Model of Hierarchical Complexity (MHC is a theory applicable to all domains in which information is organized and accounts for increases in behavioral complexity which includes cognitive or reasoning complexity. The paper is a theoretical introduction to MHC as a tool for teaching in higher education. The model clarifies and shows the gap between the complexity in the subject and the students understanding of the same subject. We also discuss how to support the development of more complex reasoning in students.

  12. Treatment of pressure sores in spina bifida patients with calcium alginate and foam dressings.

    Science.gov (United States)

    Ausili, E; Paolucci, V; Triarico, S; Maestrini, C; Murolo, D; Focarelli, B; Rendeli, C

    2013-06-01

    Prospective study on local treatment of pressure sores using calcium alginate and foam dressings in spina bifida patients. Investigate if this sequential approach is valid and safe for selected patients with neurological impairments. Using European Pressure Ulcer Grading System, after clinical evaluation of local sore, selected patients of Spina Bifida Center of Rome were treated with sequential calcium alginate and foam dressings for 12 weeks. Pressure ulcere surfaces were measured monthly by ulcer tracing. The endpoints were the mean absolute areas surface reduction during every month and number of patients achieving a 50% or more during study. 14 patients (7 males aged 12-24 years) with spina bifida and pressure sores were treated. Mean and standard deviation of mean surface area reduction were 12.5 ± 7.5 cm 2 at start of the study versus 3.7 ± 5.2 cm 2 after 12 weeks, p pressure sores in selected patients with spina bifida. In fact, they protect the wound and create an environment favorable to healing.

  13. [Assessment of patients with pressure sores admitted in a tertiary care center].

    Science.gov (United States)

    Moro, Adriana; Maurici, Alice; do Valle, Juliana Barros; Zaclikevis, Viviane Renata; Kleinubing, Harry

    2007-01-01

    To determine the prevalence and analyze the profile of patients with pressure sores, focusing on risk factors, the patients' clinical characteristics at a tertiary care center, as well as stage and location of the lesions on the body. This was a cross sectional not controlled observational study, all patients admitted from April to June of 2005 were observed daily to identify all cases of pressure sores. The affected patients were evaluated by a standard questionnaire and the Scale of Braden was applied to define the risk of developing ulcers. Of the 690 patients admitted during the referred period, a prevalence of 5.9% of patients with lesions was observed, equivalent to 41 patients 63.9% of which were elderly and the average length of stay was 18 days. In the sample studied 41.5% of patients were found in the internal medicine section and the intensive care unit, ICU. The most common location for sores was the sacral area, corresponding to 73.1% of the patients, and stage II was the most frequent, observed in 58.5% of those patients. According to the Braden scale, most patients, 80.4%, had a high risk of developing pressure ulcers, compared to 9.7% of patients with moderate risk and 7.4% with low risk. The affected patients were at high risk of developing pressure sores. Prevalence of these lesions and the clinical and demographic profile of the affected patients are in accordance with the data in literature.

  14. An audit of pressure sores caused by intermittent compression devices used to prevent venous thromboembolism.

    Science.gov (United States)

    Skillman, Joanna; Thomas, Sunil

    2011-12-01

    When intermittent compression devices (ICDs) are used to prevent venous thromboembolism (VTE) they can cause pressure sores in a selected group of women, undergoing long operations. A prospective audit pre and post intervention showed a reduced risk with an alternative device, without increasing the risk of VTE.

  15. [Pedicled superior gluteal artery perforator bilateral quadrilobed flaps for repair of large sacrococcygeal pressure sores].

    Science.gov (United States)

    Hai, Henglin; Li, Huatao; Chen, Yang; Li, Qiang; Wu, Shenggang; Lili, Wang; Yan, Lei; Xiaoying, Zhou

    2013-03-01

    To investigate the effectiveness of pedicled superior gluteal artery perforator bilateral quadrilobed flaps for repairing large sacrococcygeal pressure sores. Between June 2003 and August 2011, 6 paraplegia patients with large sacrococcygeal pressure sores were repaired with the pedicled superior gluteal artery perforator bilateral quadrilobed flaps. There were 2 males and 4 females with an average age of 45.6 years (range, 37-62 years). The mean disease duration was 8.4 months (range, 3-26 months). According to National Pressure Ulcer Advisory Panel (NPUAP) standard, 6 cases rated as degree IV. The size of pressure sores ranged from 15 cm x 13 cm to 18 cm x 16 cm. The size of flaps ranged from 18 cm x 14 cm to 21 cm x 15 cm. After operation, all flaps survived successfully. The wounds healed by first intention in 5 cases; partial dehiscence of incision occurred in 1 case, which was cured after dressing change for 26 days. Six patients were followed up 6-24 months (mean, 12.5 months). The appearance and texture of the flaps were smooth and soft with good elasticity and no ulceration. Pedicled superior gluteal artery perforator bilateral quadrilobed flaps can repair large sacrococcygeal pressure sores. The appearance of flaps is smooth and has good compression-resistance effect.

  16. Evaluating the effects of pentoxifylline administration on experimental pressure sores in rats by biomechanical examinations.

    Science.gov (United States)

    Velaei, Kobra; Bayat, Mohammad; Torkman, Giti; Rezaie, Fatemealsadat; Amini, Abdollah; Noruzian, Mohsen; Tavassol, Azaedh; Bayat, Mehernoush

    2012-09-01

    This study used a biomechanical test to evaluate the effects of pentoxifylline administration on the wound healing process of an experimental pressure sore induced in rats. Under general anesthesia and sterile conditions, experimental pressure sores generated by no. 25 Halsted mosquito forceps were inflicted on 12 adult male rats. Pentoxifylline was injected intraperitoneally at a dose of 50 mg/kg daily from the day the pressure sore was generated, for a period of 20 days. At the end of 20 days, rats were sacrificed and skin samples extracted. Samples were biomechanically examined by a material testing instrument for maximum stress (N mm(2)), work up to maximum force (N), and elastic stiffness (N/mm). In the experimental group, maximum stress (2.05±0.15) and work up to maximum force (N/mm) (63.75±4.97) were significantly higher than the control group (1.3±0.27 and 43.3±14.96, P=0.002 and P=0.035, respectively). Pentoxifylline administration significantly accelerated the wound healing process in experimental rats with pressure sores, compared to that of the control group.

  17. Interleukin-6 and Delayed Onset Muscle Soreness Do Not Vary during the Menstrual Cycle

    Science.gov (United States)

    Chaffin, Morgan E.; Berg, Kris E.; Meendering, Jessica R.; Llewellyn, Tamra L.; French, Jeffrey A.; Davis, Jeremy E.

    2011-01-01

    The purpose of this study was to determine if a difference in interleukin-6 (IL-6) and delayed onset muscles soreness (DOMS) exists in two different phases of the menstrual cycle. Nine runners performed one 75-min high-intensity interval running session during the early follicular (EF) phase and once during the midluteal (ML) phase of the…

  18. Pattern of Pressure Sores in Spinal Injured Patients with in the First ...

    African Journals Online (AJOL)

    Background: Before 2006, all our spinal injured patients were nursed on conventional form mattress without pressure redistributing support surface. Pressure sore was a common complication and was a major contributing factor to prolonged hospitalization. Aim: The aim of this study is to determine the pattern of pressure ...

  19. Evaluation of local muscle soreness treatment with anterior bite splint made of soft putty impression material

    Directory of Open Access Journals (Sweden)

    Harry Laksono

    2013-03-01

    Full Text Available Background: Local muscle soreness is the most common temporomandibular disorders complaint of patients seeking treatment in the dental clinics. The emergency treatment that can be done in the clinics to manage this disorder is by making anterior bite splint. Anterior bite splint is usually made of acrylic, but currently there is a soft putty impression material that can also be used for making anterior bite splint. The effectiveness of soft putty anterior bite splint in local muscle soreness treatment still has not clear. Purpose: To determine the effectiveness of the soft putty impression material as a material used for making anterior bite splint in the treatment of local muscle soreness. Case: Six patients was reported five female patients aged 20-40 years old and one male patient aged 37 years old with local muscle soreness. Four female patients with a “click” sound on TMJ. Case management: Make differential diagnosis with screening history (anamnesis, clinical examination consists of extra oral examination such as muscle and temporomandibular joint palpation, measure the mandibular movement, end-feel, load test, intra oral examination and radiographic evaluation. Record the results and make the diagnosis. Make a soft putty anterior bite splint, adjusted and inserted in the maxillary anterior teeth. Record the results based on signs and symptoms. Conclusion: It can be concluded that anterior bite splint made of soft putty impression material is effective for treatment the local muscle soreness.Latar belakang: Salah satu tipe temporomandibular disorders yang paling sering dijumpai di klinik dokter gigi adalah local muscle soreness. Perawatan yang dapat dengan segera dilakukan di klinik untuk mengelola gangguan tersebut adalah dengan pembuatan anterior bite splint. Biasanya anterior bite splint terbuat dari akrilik, namun saat ini telah ada bahan cetak soft putty yang memungkinkan untuk dipakai sebagai bahan pembuatan anterior bite splint

  20. Comparison of gluteal perforator flaps and gluteal fasciocutaneous rotation flaps for reconstruction of sacral pressure sores.

    Science.gov (United States)

    Chen, Yen-Chou; Huang, Eng-Yen; Lin, Pao-Yuan

    2014-03-01

    The gluteus maximus myocutaneous flap was considered the workhorse that reconstructed sacral pressure sores, but was gradually replaced by fasciocutaneous flap because of several disadvantages. With the advent of the perforator flap technique, gluteal perforator (GP) flap has gained popularity nowadays. The aim of this study was to compare the complications and outcomes between GP flaps and gluteal fasciocutaneous rotation (FR) flaps in the treatment of sacral pressure sores. Between April 2007 and June 2012, 63 patients underwent sacral pressure sore reconstructions, with a GP flap used in 31 cases and an FR flap used in 32 cases. Data collected on the patients included patient age, gender, co-morbidity for being bedridden and follow-up time. Surgical details collected included the defect size, operative time and estimated blood loss. Complications recorded included re-operation, dehiscence, flap necrosis, wound infection, sinus formation, donor-site morbidity and recurrence. The complications and clinical outcomes were compared between these two groups. We found that there was no significant difference in patient demographics, surgical complications and recurrence between these two groups. In gluteal FR flap group, all recurrent cases (five) were treated by reuse of previous flaps. Both methods are comparable, good and safe in treating sacral pressure sores. Gluteal FR flap can be performed without microsurgical dissection, and re-rotation is feasible in recurrent cases. The authors suggest using gluteal FR flaps in patients with a high risk of sore recurrence. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  1. A composite gluteofemoral flap for reconstruction of large pressure sores over the sacrococcygeal region.

    Science.gov (United States)

    Xie, Yun; Zhuang, Yue-Hong; Xue, Lan; Zheng, He-Ping; Lin, Jian-Hua

    2015-12-01

    Gigantic pressure sores pose a daunting challenge for plastic surgeons. This paper presents a composite gluteofemoral flap for reconstruction of large pressure sores over the sacrococcygeal region. In this anatomical study, 30 embalmed cadaveric lower limbs were used for dissection to observe the musculocutaneous perforators of the inferior gluteal artery and the longitudinal nutritional vascular chain of the posterior femoral cutaneous nerve. In this clinical study, eight patients underwent surgical harvest of the composite gluteofemoral flap for coverage of grade IV sacrococcygeal pressure sores. The size of the pressure sores ranged between 16 × 9 cm and 22 × 10 cm. The inferior gluteal artery was present in 26 cases and absent in four cases. It gave off two to four musculocutaneous branches with a diameter larger than 0.5 mm to the gluteus maximus. A direct cutaneous branch was given off at the inferior margin of the gluteus maximus, serving as a nutritional artery for the posterior femoral cutaneous nerve. The size of the flap harvested ranged between 22 × 9 cm and 32 × 10 cm. Flaps in seven patients survived uneventfully and developed epidermal necrosis at the distal margin in one case. An average 2-year follow-up revealed no recurrence of pressure sores. The composite gluteofemoral flap, being robust in blood supply, simple in surgical procedure, and large in donor territory, is an important addition to the armamentarium. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  2. Fluid-bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, G.; Schoebotham, N.

    1981-02-01

    In Energy Equipment Company's two-stage fluidized bed system, partial combustion in a fluidized bed is followed by burn-off of the generated gases above the bed. The system can be retrofitted to existing boilers, and can burn small, high ash coal efficiently. It has advantages when used as a hot gas generator for process drying. Tests on a boiler at a Cadbury Schweppes plant are reported.

  3. Fluidised bed combustion system

    International Nuclear Information System (INIS)

    McKenzie, E.C.

    1976-01-01

    Fluidized bed combustion systems that facilitates the maintenance of the depth of the bed are described. A discharge pipe projects upwardly into the bed so that bed material can flow into its upper end and escape downwardly. The end of the pipe is surrounded by an enclosure and air is discharged into the enclosure so that material will enter the pipe from within the enclosure and have been cooled in the enclosure by the air discharged into it. The walls of the enclosure may themselves be cooled

  4. Cirugía reconstructiva de las úlceras por presión Reconstructive surgery of pressure sores

    Directory of Open Access Journals (Sweden)

    2007-09-01

    Full Text Available Pressure sores are frequent in certain group of patients with predisposing conditions. In their evolution, this type of sores may require surgery, but the incidence of postoperative complications is high in this type of patients, given the confluence of factors that go against the sucessful surgery of these lesions in these patients. A retrospective cross-sectional descriptive study was made to evaluate the results of surgical treatment of pressure sores in a 3 years-period. Taking into account the studied variables, the drawn conclusions will allow designing new strategies for care of these patients, in order to reduce postoperative morbidity and lenght of stay at hospital

  5. Clinical score and rapid antigen detection test to guide antibiotic use for sore throats: randomised controlled trial of PRISM (primary care streptococcal management).

    Science.gov (United States)

    Little, Paul; Hobbs, F D Richard; Moore, Michael; Mant, David; Williamson, Ian; McNulty, Cliodna; Cheng, Ying Edith; Leydon, Geraldine; McManus, Richard; Kelly, Joanne; Barnett, Jane; Glasziou, Paul; Mullee, Mark

    2013-10-10

    To determine the effect of clinical scores that predict streptococcal infection or rapid streptococcal antigen detection tests compared with delayed antibiotic prescribing. Open adaptive pragmatic parallel group randomised controlled trial. Primary care in United Kingdom. Patients aged ≥ 3 with acute sore throat. An internet programme randomised patients to targeted antibiotic use according to: delayed antibiotics (the comparator group for analyses), clinical score, or antigen test used according to clinical score. During the trial a preliminary streptococcal score (score 1, n=1129) was replaced by a more consistent score (score 2, n=631; features: fever during previous 24 hours; purulence; attends rapidly (within three days after onset of symptoms); inflamed tonsils; no cough/coryza (acronym FeverPAIN). Symptom severity reported by patients on a 7 point Likert scale (mean severity of sore throat/difficulty swallowing for days two to four after the consultation (primary outcome)), duration of symptoms, use of antibiotics. For score 1 there were no significant differences between groups. For score 2, symptom severity was documented in 80% (168/207 (81%) in delayed antibiotics group; 168/211 (80%) in clinical score group; 166/213 (78%) in antigen test group). Reported severity of symptoms was lower in the clinical score group (-0.33, 95% confidence interval -0.64 to -0.02; P=0.04), equivalent to one in three rating sore throat a slight versus moderate problem, with a similar reduction for the antigen test group (-0.30, -0.61 to -0.00; P=0.05). Symptoms rated moderately bad or worse resolved significantly faster in the clinical score group (hazard ratio 1.30, 95% confidence interval 1.03 to 1.63) but not the antigen test group (1.11, 0.88 to 1.40). In the delayed antibiotics group, 75/164 (46%) used antibiotics. Use of antibiotics in the clinical score group (60/161) was 29% lower (adjusted risk ratio 0.71, 95% confidence interval 0.50 to 0.95; P=0.02) and in the

  6. Fluidized bed incinerator development

    International Nuclear Information System (INIS)

    Ziegler, D.L.; Johnson, A.J.

    1976-01-01

    A fluidized bed incinerator is being developed for burning rad contaminated solid and liquid waste materials. In situ neutralization of acid gases by the bed material, catalytic afterburning, and gas filtration are used to produce a clean flue gas without the use of aqueous scrubbing

  7. Gas fluidized bed reactor

    International Nuclear Information System (INIS)

    Bernardelli, H. da C.

    1976-03-01

    The equations of motion for both gas and particles in a gas fluidised system are stablished through general assumptions which are generally accepted on physical grounds. The resulting model is used to study the velocity fields of each phase in the case of an isolated bubble rising close to the flat distributor plate. A well posed problem results for the solution of Laplace's equation of the potential flow of the particles when consideration is given to the presence of the distributor as a boundary condition. The corresponding stream functions are also obtained which enable the drawing of the motion patterns using numerical techniques. The following two dimensional cases are analysed: S/b=1; S/b=1,5; S/b=2,5; S/b=5 and the limiting case S/b→αinfinite. The results for the interphase exchange between bubbles and particulate phases are applied to a gas fluidised bed reactor and its effect on the chemical conversion is studied for the simplest cases of piston flow and perfect mixing in the particulate phase [pt

  8. APLIKASI PEMESANAN MAKANAN ONLINE BERBASIS WEB PADA RUMAH MAKAN PAGI SORE SIPIN JAMBI

    Directory of Open Access Journals (Sweden)

    Novhirtamely Kahar

    2013-07-01

    Full Text Available Rumah Makan Pagi Sore Sipin Jambi merupakan rumah makan yang menyediakan bermacam-macam menu makanan khas minang dan memiliki banyak pelanggan. Pemesanan makanan bagi pelanggan tetap jika jarak tempat tinggal dengan rumah makan berjauhan selama ini dilakukan melalui telepon. Cara tersebut memiliki kendala, salah satunya pelanggan tidak mengetahui daftar menu dan harga yang ditawarkan oleh rumah makan. Penelitian ini bertujuan untuk membangun aplikasi pemesanan makanan online sehingga penyampaian informasi menjadi cepat, akurat, memiliki jangkauan yang luas, serta dapat memesan makanan secara online. Sistem aplikasi pemesanan ini terdiri dari aplikasi untuk pelanggan dan admin. Aplikasi untuk pelanggan terdiri dari : Home, Profil, Menu, Paket Catering, Promotion, Info, dan Pemesanan. Aplikasi pemesanan untuk pelanggan terdiri dari Delivery Service, Paket Catering Service, dan Paket Catering Ruang Minang. Sedangkan aplikasi untuk admin terdiri dari olah data menu utama, transaksi, dan laporan. Untuk transaksi pembayaran dilakukan secara cash kepada bagian pengiriman. Sistem aplikasi ini dibangun dengan menggunakan PHP dan database MySQL. Dengan dibangunnya aplikasi ini, maka pelanggan dengan mudah mendapatkan informasi tentang Rumah Makan Pagi Sore Sipin Jambi dan dapat melakukan pemesanan makanan dimana saja dan kapan saja, sehingga dapat meningkatkan jumlah pelanggan dan berdampak pada peningkatan profit Rumah Makan Pagi Sore tersebut.Rumah Makan Pagi Sore Sipin Jambi merupakan rumah makan yang menyediakan bermacam-macam menu makanan khas minang dan memiliki banyak pelanggan. Pemesanan makanan bagi pelanggan tetap jika jarak tempat tinggal dengan rumah makan berjauhan selama ini dilakukan melalui telepon. Cara tersebut memiliki kendala, salah satunya pelanggan tidak mengetahui daftar menu dan harga yang ditawarkan oleh rumah makan. Penelitian ini bertujuan untuk membangun aplikasi pemesanan makanan online sehingga penyampaian informasi menjadi

  9. Inferior gluteal artery perforator flap: a viable alternative for ischial pressure sores.

    Science.gov (United States)

    Kim, Young Seok; Lew, Dae Hyun; Roh, Tai Suk; Yoo, Won Min; Lee, Won Jai; Tark, Kwan Chul

    2009-10-01

    The ischial area is by far the most common site for pressure sores in wheelchair-bound paraplegic patients, because most of the pressure of the body is exerted on this area in the seated position. Even after a series of successful pressure sore treatments, the site is very prone to relapse from the simplest everyday tasks. Therefore, it is crucial to preserve the main pedicle during primary surgery. Several surgical procedures, such as myocutaneous flap and perforator flap, have been introduced for the treatment of pressure sores. During a 4-year time period at our institute, we found favourable clinical results using the inferior gluteal artery perforator (IGAP) procedure for ischial sore treatment. A total of 23 patients (20 males and three females) received IGAP flap surgery in our hospital from January 2003 to January 2007. Surgery was performed on the same site again in 10 (43%) patients who had originally relapsed after undergoing the conventional method of pressure sore surgery. The average age of patients was 47.4 years (range 26-71 years). Most of the patients were paraplegic (16 cases, 70%) and others were either quadriplegic (four cases, 17%) or ambulatory (three cases, 13%). Based on hospital records and clinical photographs, we attempted to assess the feasibility and practicability of the IGAP flap procedure through comparative analysis of several parameters including the size of the defective area, treatment modalities, relapses, complications, and postoperative treatments. The average follow-up duration for 23 subjects was 25.4 months (range 5-42 months). All flaps survived without major complications. Partial flap necrosis developed in one case but secondary healing was achieved and the final outcome was not impaired. Most of the cases healed well during the follow-up period. Postoperative complications such as wound dehiscence and fistula developed in some subjects, but all healed well with a secondary treatment. A total of five cases relapsed

  10. Effects of cryotherapy on muscle damage markers and perception of delayed onset muscle soreness after downhill running: A Pilot study

    Directory of Open Access Journals (Sweden)

    M. Rossato

    2015-06-01

    Conclusion: Use of cryotherapy after exercise with eccentric contractions was effective to reestablish the level of biochemical markers of muscle damage and reduce muscle soreness and pain perception in subjects submitted to downhill running.

  11. Influence of ginger and cinnamon intake on inflammation and muscle soreness endued by exercise in Iranian female athletes

    Directory of Open Access Journals (Sweden)

    Nafiseh Shokri Mashhadi

    2013-01-01

    Conclusions: Administration of ginger and cinnamon in athlete women for six weeks did not show any significant change in the IL-6 level, but showed a decrease in muscle soreness in the cinnamon and ginger groups.

  12. Fixed-bed Reactor Dynamics and Control - A Review

    DEFF Research Database (Denmark)

    Jørgensen, S. B.

    1986-01-01

    The industrial diversity of fixed bed reactors offers a challenging and relevant set of control problems. These intricate problems arise due to the rather complex dynamics of fixed bed reactors and to the complexity of actual reactor configurations. Many of these control problems are nonlinear...... and multi-variable. During the last decade fixed bed reactor control strategies have been proposed and investigated experimentally. This paper reviews research on these complex control problems with an emphasis upon solutions which have been demon-strated to work in the laboratory and hold promise...

  13. Giant trochanteric pressure sore: Use of a pedicled chimeric perforator flap for cover

    Directory of Open Access Journals (Sweden)

    Mehrotra Sandeep

    2009-01-01

    Full Text Available Pressure sores are increasing in frequency commensurate with an ageing population with multi-system disorders and trauma. Numerous classic options are described for providing stable wound cover. With the burgeoning knowledge on perforator anatomy, recent approaches focus on the use of perforator-based flaps in bedsore surgery. A giant neglected trochanteric pressure sore in a paraplegic is presented. Since conventional options of reconstruction appeared remote, the massive ulcer was successfully managed by a chimeric perforator-based flap. The combined muscle and fasciocutaneous flaps were raised as separate paddles based on the anterolateral thigh perforator branches and provided stable cover without complications. Perforators allow versatility in managing complex wounds without compromising on established principles.

  14. The Open Sore of Football: Aggressive Violent Behavior and Hooliganism

    Directory of Open Access Journals (Sweden)

    Gumusgul Osman

    2016-10-01

    Full Text Available Aggression and violence have been a customary part of life that mankind has had to live with from the beginning of time; it has been accepted by society even though it expresses endless negativity. Aggression and violence can find a place in sports events and football games because of the social problems of the audience watching the competitions or games, which sometimes fall into the category of hooliganism. Turkey is one of the countries that should consider this problem to be a serious social problem. Even during 2014 and 2015, a relatively short period of time, there were significant hazardous acts committed by hooligans. In February 2014, one supporter was killed after a game between Liverpool and Arsenal in England; in March 2014, a game between Trabzonspor and Fenerbahce was left half-finished because of violent acts in the stadium that caused players in the pitch to believe that they could not leave stadium alive, although they finally left after a few hours; in another incident in March 2014, one supporter was killed after a game between Helsingborg and Djugarden in Sweden; in November 2014, one supporter was killed and 14 supporters were injured before the game between Atletico Madrid and Deportivo in Spain. These are all examples of aggression, violence, and hooliganism in football. This paper aims to discuss aggression, violence, and hooliganism in football, especially in recent years, and investigate what can be done to prevent these acts from occurring again in the future by examining them in hindsight.

  15. Environmental protection stability of river bed and banks using convex, concave, and linear bed sills.

    Science.gov (United States)

    Keshavarzi, Alireza; Noori, Lila Khaje

    2010-12-01

    River bed scourings are a major environmental problem for fish and aquatic habitat resources. In this study, to prevent river bed and banks from scouring, different types of bed sills including convex, concave and linear patterns were installed in a movable channel bed in a laboratory flume. The bed sills were tested with nine different arrangements and under different flow conditions. To find the most effective bed sill pattern, the scouring depth was measured downstream of the bed sill for a long experimental duration. The scour depth was measured at the middle and at the end of each experimental test for different ratios of the arch radius to the channel width [r/w]. The experimental results indicated that the convex pattern with r/w=0.35 produced minimum bed scouring depth at the center line whereas the concave pattern with r/w=0.23 produced the minimum scour depth at the wall banks. Therefore, the convex pattern was the most effective configuration for prevention of scouring at the center line of the river while the concave pattern was very effective to prevent scouring at the river banks. These findings can be suggested to be used in practical applications.

  16. Therapeutic Effect of External Application of Ligustrazine Combined with Holistic Nursing on Pressure Sores.

    Science.gov (United States)

    Niu, Junzhi; Han, Lin; Gong, Fen

    2016-08-15

    BACKGROUND This study aimed to explore the therapeutic effect of external application of ligustrazine combined with holistic nursing on pressure sores, as well as the underlying mechanism. MATERIAL AND METHODS From February 2014 to March 2015, a total of 32 patients with Phase II and Phase III pressure sores were enrolled and randomly assigned to an experimental group or a control group. The clinical data were comparable between the 2 groups. In addition to holistic nursing, the patients in the experimental group received 4 weeks of continuous external application of ligustrazine, whereas patients in the control group received compound clotrimazole cream. Therapeutic effect and healing time were recorded. HaCaT cells were used as an in vitro model for mechanism analysis of the effect of ligustrazine in treating pressure sores. After culturing with different concentrations of ligustrazine or the inhibitor of AKT (LY294002) for 72 h, cell viability, clone formation numbers, and levels of phosphatidyl inositol 3-kinase (PI3K), p-AKT, and p-mammalian target of rapamycin (mTOR) were determined. RESULTS Compared to the control group, the total effective rate in the experimental group was significantly higher, and the healing time was significantly reduced. Cell viability and clone formation numbers were significantly upregulated by ligustrazine in a dose-dependent manner. Both the cell viability and clone formation numbers were significantly inhibited by application of LY294002. CONCLUSIONS Our results suggest that ligustrazine combined with holistic nursing is an effective treatment of pressure sores. The protective effect may be associated with the promotion of cell growth by activation of the PI3K/AKT pathway.

  17. Flap surgery for pressure sores: should the underlying muscle be transferred or not?

    Science.gov (United States)

    Thiessen, Filip E; Andrades, Patricio; Blondeel, Philip N; Hamdi, Moustapha; Roche, Nathalie; Stillaert, Filip; Van Landuyt, Koenraad; Monstrey, Stan

    2011-01-01

    Musculocutaneous flaps have become the first choice in the surgical repair of pressure sores, but the indication for including muscle in the transferred flaps still remains poorly defined. This study compares outcomes after muscle and non-muscle flap coverage of pressure sores to investigate whether it is still necessary to incorporate muscle tissue as part of the surgical treatment of these ulcers. A retrospective revision of 94 consecutive patients with ischial or sacral pressure sores operated between 1996 and 2002 was performed. Depending on the inclusion of muscle into the flap, the patients were divided in two groups: musculocutaneous flap group and fasciocutaneous flap group. Charts were reviewed for patient characteristics, ulcer features and reconstructive information. Data between groups were compared with emphasis on early (haematoma or seroma, dehiscence, infections, necrosis and secondary procedures) and late (recurrence) postoperative complications. A total of 37 wounds were covered with muscle and 57 wounds covered without muscle tissue. The groups were comparable in relation to age, gender, ulcer characteristics and timing for surgery. There were no significant differences in early complications between the study groups. The mean follow-up period was 3.10 ± 1.8 years (range: 0.5 to 6.7). There were no statistical differences in ulcer recurrence between the groups. The type of flap used was not associated with postoperative morbidity or recurrence in the univariate and multivariate analyses. The findings of this clinical study indicate that the musculocutaneous flaps are as good as fasciocutaneous flaps in the reconstruction of pressure sores, and they question the long-standing dogma that muscle is needed in the repair of these ulcers. Copyright © 2010 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  18. Clinical effects of Angelica dahurica dressing on patients with I-II phase pressure sores.

    Science.gov (United States)

    Gong, Fen; Niu, Junzhi; Pei, Xing

    2016-11-02

    Angelica dahurica is a well-known traditional Chinese Medicine (TCM), while little information is available about its effects on pressure sores. We aimed to investigate the clinical effect of Angelica dahurica on patients with I-II phase pressure sores, as well as the underlying mechanism. Patients (n = 98) with phase I and phase II pressure sores were enrolled and randomly assigned to control and treated groups. In addition to holistic nursing, patients in the control group received compound clotrimazole cream, while patients in the treated group received continuous 4 weeks of external application of Angelica dahurica dressing. Therapeutic effect was recorded, along with the levels of interleukin-8 (IL-8), epidermal growth factor (EGF), transforming growth factor (TGF)-β, and vascular endothelial growth factor (VEGF). Besides, HaCaT cells were cultured with different concentrations of Angelica dahurica, and then cell viability, clone formation numbers, cell cycle, and levels of cyclin D1 and cyclin-dependent kinase (CDK) 2 were determined. The total effective rate in the treated group was significantly higher than in the control group. Levels of IL-8, EGF, TGF-β, and VEGF were statistically increased by Angelica dahurica. In addition, the cell viability and clone formation numbers were significantly upregulated by Angelica dahurica in a dose-dependent manner. Also, the percentage of cells in G0/G1 phase, and levels of cyclin D1 and CDK2 were significantly elevated. Our results suggest that Angelica dahurica may provide an effective clinical treatment for I-II phase pressure sores.

  19. Marine oil dietary supplementation reduces delayed onset muscle soreness after a 30 km run

    OpenAIRE

    Baum, Klaus; Telford, Richard D; Cunningham, Ross B

    2013-01-01

    Klaus Baum,1 Richard D Telford,2 Ross B Cunningham,3 1Trainingsinstitut Prof Baum, Köln, Germany; 2College of Medicine, Biology, and Environment, Australian National University, Canberra, ACT, Australia; 3The Fenner School of Environment and Society, Australian National University, Canberra, ACT, Australia Objective: Runners are prone to delayed onset muscle soreness (DOMS) during long distance training. This especially holds for unaccustomed training volumes at moderate to high int...

  20. Efficiency of Magnetic Field Treatment on Pressure Sores in Bedridden Patients

    Directory of Open Access Journals (Sweden)

    Ferda Özdemir

    2011-09-01

    Full Text Available Objective: Pressure sores are an important source of complications in patients who are immobilized and bedridden. We aimed to investigate the efficiency of magnetic field treatment in pressure sores. Material and Methods: This was a randomized, double blind controlled design study. 20 patients in the study group received magneto-therapy, once a day for 30 minutes and with 150G, keeping to the BTL09 magnetotherapy device’s program. In the control group, 20 patients received the dressing only once a day. The surface areas of the pressure sores were evaluated at the onset of the treatment (1st day, and on the 7th and 15th days.Results: When within group comparisons were conducted, a significant difference was observed between the 1st and 7th day, 7th and 15th day, and 1st and 15th day measures in both the groups in terms of the scar area. The average healing time for the treatment group was 10.80±4.06 (6-20 days, and the average healing time for the control group was 18.85±9.75 (5-32 days. There was a statistically significant difference between the two groups (z=-2.114, p=0.034. Also, there was a significant difference in the scar area between the two groups in the 15th day measure (z=-3.818, p=0.000.Conclusion: The healing process of the tissue can be accelerated.with the use of magnetotherapy in the treatment of pressure sores of stage II and III,

  1. Reconstruction of trochanteric pressure sores with pedicled anterolateral thigh myocutaneous flaps.

    Science.gov (United States)

    Wang, Chih-Hsin; Chen, Shih-Yi; Fu, Ju-Peng; Dai, Niann-Tzyy; Chen, Shao-Liang; Chen, Tim-Mo; Chen, Shyi-Gen

    2011-05-01

    To provide an alternative choice for covering trochanteric pressure sores, we report on a modified pedicle anterolateral thigh (ALT) myocutaneous flap based on the descending branch of the lateral circumflex femoral artery. From August 2007 to January 2010, 20 consecutive patients (10 men and 10 women) underwent 21 pedicled ALT myocutaneous flaps for reconstruction of trochanteric pressure sores. The flap was designed and elevated, resembling the ALT perforator flap including part of the vastus lateralis muscle but without skeletonisation of the perforators. The mean age of patients was 79.4 years (range: 46-103). The mean follow-up period was 13.9 months (range: 3-32). The flaps were 8-21 cm long and 5-11 cm wide. All flaps healed without major complications. All donor sites were closed primarily without skin grafting and showed good aesthetic results. No recurrence was observed. This modified design of pedicled ALT myocutaneous flap without skeletonisation of perforators is a reliable and easily harvested flap for reconstruction of trochanteric pressure sores with limited morbidity. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

  2. Profunda Femoris Artery Perforator Propeller Flap: A Valid Method to Cover Complicated Ischiatic Pressure Sores.

    Science.gov (United States)

    Scalise, Alessandro; Tartaglione, Caterina; Bolletta, Elisa; Pierangeli, Marina; Di Benedetto, Giovanni

    2015-08-01

    We report the case of a 50-year-old paraplegic man with a complicated grade III/IV ischiatic pressure sore treated with a propeller flap based on the first perforator of the profunda femoris artery. Our aim was to surgically reconstruct an ischiatic pressure sore in a patient with ankylosis using a fasciocutaneous perforator propeller flap obtained from the posterior region of the thigh. Our decision to perform a profunda femoris artery perforator propeller flap reconstruction was mainly due to the anatomical contiguity of the flap with the site of the lesion and the good quality of the skin harvested from the posterior region of the thigh. The use of the perforator fasciocutaneous flap represents a muscle-sparing technique, providing a better long-term result in surgical reconstruction. The choice of the 180-degree propeller flap was due to its ability to provide a good repair of the pressure ulcer and to pass over the ischiatic prominence in the patient in the forced decubitus position. The operatory course did not present any kind of complication. Using this reconstructive treatment, we have obtained complete coverage of the ischiatic pressure sore.

  3. The operative treatment of pressure sores in the pelvic region: A 10-year period overview.

    Science.gov (United States)

    Jósvay, János; Klauber, András; Both, Béla; Kelemen, Péter B; Varga, Zsombor Z; Pesthy, Pál Cs

    2015-07-01

    Pelvic region pressure sores often develop following spinal cord injury. Surgery is often necessary for long standing, large-sized pressure sores not responding to conservative treatment. Authors analyze their results of a 10-year period, and identify factors contributing to the reduction of the recurrence rate. A total of 119 pressure sores were operated on 98 patients in two institutions during a 10-year period (1 January 2003 to 31 December 2012). The encountered perioperative complications are summarized, and the recurrence rate is analyzed with a patient follow-up questionnaire. We experienced 15 perioperative complications (12.6%). All complications were fully resolved by conservative treatment. Fifty-eight returned patient replies were processed. The average follow-up time after surgery was 5.2 years. The recurrence rate was 5.47%. The strict adherence to surgical indications, full patient compliance, specialized pre- and post-operative patient care, our routinely used preferred surgical method, all contribute to a low post-operative complication rate, long-term flap survival, and an extended recurrence free period.

  4. Muscle fascicle behavior during eccentric cycling and its relation to muscle soreness.

    Science.gov (United States)

    Peñailillo, Luis; Blazevich, Anthony J; Nosaka, Kazunori

    2015-04-01

    A single bout of eccentric exercise confers a protective effect against muscle damage and soreness in subsequent eccentric exercise bouts, but the mechanisms underpinning this effect are unclear. This study compared vastus lateralis (VL) muscle-tendon behavior between two eccentric cycling bouts to test the hypothesis that muscle-tendon behavior would be different between bouts and would be associated with the protective effect. Eleven untrained men (27.1 ± 7.0 yr) performed two bouts of eccentric cycling (ECC1 and ECC2) separated by 2 wk for 10 min at 65% of maximal concentric workload (191.9 ± 44.2 W) each. Muscle soreness (by visual analog scale) and maximal voluntary isometric contraction (MVC) torque of the knee extensors were assessed before and 1-2 d after exercise. Using ultrasonography, VL fascicle length and angle changes during cycling were assessed, and tendinous tissue (TT) length changes were estimated. VL EMG amplitude, crank torque, and knee joint angles were measured during cycling. Soreness was greater (P tendon behavior may be an important mechanism underpinning the protective effect.

  5. Bed Bugs FAQs

    Science.gov (United States)

    ... Europe. Bed bugs have been found in five-star hotels and resorts and their presence is not ... Health – Division of Parasitic Diseases Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs ...

  6. Bed Bug Information Clearinghouse

    Science.gov (United States)

    Its purpose is to help states, communities, and consumers in efforts to prevent and control bed bug infestations. Currently includes only reviewed material from federal/state/local government agencies, extension services, and universities.

  7. Particle fuel bed tests

    International Nuclear Information System (INIS)

    Horn, F.L.; Powell, J.R.; Savino, J.M.

    1985-01-01

    Gas-cooled reactors, using packed beds of small diameter coated fuel particles have been proposed for compact, high-power systems. The particulate fuel used in the tests was 800 microns in diameter, consisting of a thoria kernel coated with 200 microns of pyrocarbon. Typically, the bed of fuel particles was contained in a ceramic cylinder with porous metallic frits at each end. A dc voltage was applied to the metallic frits and the resulting electric current heated the bed. Heat was removed by passing coolant (helium or hydrogen) through the bed. Candidate frit materials, rhenium, nickel, zirconium carbide, and zirconium oxide were unaffected, while tungsten and tungsten-rhenium lost weight and strength. Zirconium-carbide particles were tested at 2000 K in H 2 for 12 hours with no visible reaction or weight loss

  8. Tongue problems

    Science.gov (United States)

    ... for mouth ulcers, leukoplakia, oral cancer, and other mouth sores. Anti-inflammatory medicines may be prescribed for glossititis and geographic tongue. Alternative Names Dark tongue; Burning tongue syndrome - symptoms Images Black hairy tongue Black hairy tongue ...

  9. Bed Bug Epidemic: A Challenge to Public Health

    Science.gov (United States)

    Ratnapradipa, Dhitinut; Ritzel, Dale O.; Haramis, Linn D.; Bliss, Kadi R.

    2011-01-01

    In recent years, reported cases of bed bug infestations in the U.S. and throughout the world have escalated dramatically, posing a global public health problem. Although bed bugs are not known to transmit disease to humans, they pose both direct and indirect public health challenges in terms of health effects, treatment, cost, and resource…

  10. Pebble-bed reactor

    International Nuclear Information System (INIS)

    Lohnert, G.; Mueller-Frank, U.; Heil, J.

    1976-01-01

    A pebble-bed nuclear reactor of large power rating comprises a container having a funnel-shaped bottom forming a pebble run-out having a centrally positioned outlet. A bed of downwardly-flowing substantially spherical nuclear fuel pebbles is positioned in the container and forms a reactive nuclear core maintained by feeding unused pebbles to the bed's top surface while used or burned-out pebbles run out and discharge through the outlet. A substantially conical body with its apex pointing upwardly and its periphery spaced from the periphery of the container spreads the bottom of the bed outwardly to provide an annular flow down the funnel-shaped bottom forming the runout, to the discharge outlet. This provides a largely constant downward velocity of the spheres throughout the diameter of the bed throughout a substantial portion of the down travel, so that all spheres reach about the same burned-out condition when they leave the core, after a single pass through the core area

  11. Preventing pressure sores of the nasal ala after nasotracheal tube intubation: from animal model to clinical application.

    Science.gov (United States)

    Huang, Tze-Ta; Tseng, Chih-En; Lee, Tsan-Mu; Yeh, Jen-Ying; Lai, Yu-Yung

    2009-03-01

    Nasal-ala pressure sores induced by nasotracheal intubation are common complications of oral and maxillofacial surgery, but are easily ignored. To determine whether such sores could be prevented, we studied the effects of a combination of cushioning material in an animal model, and then analyzed the efficacy of this combination clinically. Four pigs received nasotracheal intubation. Each pig received intubation for 4, 8, 12, or 16 hours. Outcomes from pigs undergoing 500-gram-weight compression on each nostril were compared: one nostril received an application of cushioning materials, and the contralateral nostril did not. After the required study period, clinical assessment and further evaluation were performed by measuring pressure-sore dimensions and performing incisional biopsies. Clinical applications of this protective technique were then undertaken. Eight patients who underwent intubation without Soft Liner (GC Co, Tokyo, Japan) and DuoDERM CGF (ConvaTec, Inc, Princeton, NJ) protection, and 10 patients with Soft Liner and DuoDERM protection, were evaluated. The protective efficacy of the cushioning materials was significant in the animal model as well as in clinical practice. Pressure sores were avoided on the protected side, with severe tissue necrosis documented on the control side. We found that the combined use of Soft Liner and DuoDERM reduced the size and severity of nasal-ala pressure sores attributable to nasotracheal intubation during oral and maxillofacial surgery.

  12. EFFECT OF CAFFEINE ON THE AMOUNT OF PERCEIVED PAIN, JOINT RANGE OF MOTION AND EDEMA AFTER DELAYED MUSCLE SORENESS

    Directory of Open Access Journals (Sweden)

    Karabalaeifar Sara

    2013-01-01

    Full Text Available Delayed onset muscle soreness usually occurs after doing a new unusual physical activity, especially when, associated with repeated eccentric contractions and then it gradually disappears. There is not an extensive agreement in the case of treatment method of soreness signs quick reduction. This research was carried out with the aim of investigation caffeine consumption effect to find a good way in order to reduce the signs of delayed onset muscle soreness. In this semi-experimental with Double-blind design, 16 female volleyball player with an age average of 22.5+2.5 in 2 homogeneous 8 subject control and experimental group were studied. In this research, the effect of caffeine existing in coffee in 5 stages (24h before exercise, 12h before, immediately before exercise, after exercise and 12h after it and 1mg per 1kg of body weight on amount of perceived pain and range of motion of the joint and edema due to delay onset muscle soreness because of 50 jumps and lands of a 1 meter stage was investigated. The results showed that caffeine consumption has a meaningful effect on reduction of all the expressed signs after eccentric contractions. So it is recommended that physio thrapysts, doctors and athletes use this method to reduce delayed onset muscle soreness consequences after the injury.

  13. in Spouted Bed

    Directory of Open Access Journals (Sweden)

    Bronislaw Buczek

    2013-01-01

    Full Text Available Samples of active coke, fresh and spent after cleaning flue gases from communal waste incinerators, were investigated. The outer layers of both coke particles were separately removed by comminution in a spouted bed. The samples of both active cokes were analysed by means of densities, mercury porosimetry, and adsorption technique. Remaining cores were examined to determine the degree of consumption of coke by the sorption of hazardous emissions (SO2, HCl, and heavy metals through its bed. Differences in contamination levels within the porous structure of the particles were estimated. The study demonstrated the effectiveness of commercial active coke in the cleaning of flue gases.

  14. Activation of lower back muscles via FES for pressure sores prevention in paraplegia: a case study.

    Science.gov (United States)

    Vanoncini, M; Holderbaum, W; Andrews, B J

    2010-04-01

    The aim of this paper is to show the feasibility of the use of functional electrical stimulation (FES) applied to the lower back muscles for pressure sores prevention in paraplegia. The hypothesis under study is that FES induces a change in the pressure distribution on the contact area during sitting. Tests were conducted on a paraplegic subject (T5), sitting on a standard wheelchair and cushion. Trunk extensors (mainly the erector spinae) were stimulated using surface electrodes placed on the skin. A pressure mapping system was used to measure the pressure on the sitting surface in four situations: (a) no stimulation; (b) stimulation on one side of the spine only; (c) stimulation on both sides, at different levels; and (d) stimulation at the same level on both sides, during pressure-relief manoeuvres. A session of prolonged stimulation was also conducted. The experimental results show that the stimulation of the erector spinae on one side of the spine can induce a trunk rotation on the sagittal plane, which causes a change in the pressure distribution. A decrease of pressure on the side opposite to the stimulation was recorded. The phenomenon is intensified when different levels of stimulation are applied to the two sides, and such change can be sustained for a considerable time (around 5 minutes). The stimulation did not induce changes during pressure-relief manoeuvres. Finally, from this research we can conclude that the stimulation of the trunk extensors can be a useful tool for pressure sores prevention, and can potentially be used in a routine for pressure sores prevention based on periodical weight shifts.

  15. Massage Alleviates Delayed Onset Muscle Soreness after Strenuous Exercise: A Systematic Review and Meta-Analysis

    Directory of Open Access Journals (Sweden)

    Jianmin Guo

    2017-09-01

    Full Text Available Purpose: The purpose of this systematic review and meta-analysis was to evaluate the effects of massage on alleviating delayed onset of muscle soreness (DOMS and muscle performance after strenuous exercise.Method: Seven databases consisting of PubMed, Embase, EBSCO, Cochrane Library, Web of Science, CNKI and Wanfang were searched up to December 2016. Randomized controlled trials (RCTs were eligible and the outcomes of muscle soreness, performance (including muscle maximal isometric force (MIF and peak torque and creatine kinase (CK were used to assess the effectiveness of massage intervention on DOMS.Results: Eleven articles with a total of 23 data points (involving 504 participants satisfied the inclusion criteria and were pooled in the meta-analysis. The findings demonstrated that muscle soreness rating decreased significantly when the participants received massage intervention compared with no intervention at 24 h (SMD: –0.61, 95% CI: –1.17 to –0.05, P = 0.03, 48 h (SMD: –1.51, 95% CI: –2.24 to –0.77, P < 0.001, 72 h (SMD: –1.46, 95% CI: –2.59 to –0.33, P = 0.01 and in total (SMD: –1.16, 95% CI: –1.60 to –0.72, P < 0.001 after intense exercise. Additionally, massage therapy improved MIF (SMD: 0.56, 95% CI: 0.21–0.90, P = 0.002 and peak torque (SMD: 0.38, 95% CI: 0.04–0.71, P = 0.03 as total effects. Furthermore, the serum CK level was reduced when participants received massage intervention (SMD: –0.64, 95% CI: –1.04 to –0.25, P = 0.001.Conclusion: The current evidence suggests that massage therapy after strenuous exercise could be effective for alleviating DOMS and improving muscle performance.

  16. The Safety of Hospital Beds

    Science.gov (United States)

    Gervais, Pierre; Pooler, Charlotte; Merryweather, Andrew; Doig, Alexa K.; Bloswick, Donald

    2015-01-01

    To explore the safety of the standard and the low hospital bed, we report on a microanalysis of 15 patients’ ability to ingress, move about the bed, and egress. The 15 participants were purposefully selected with various disabilities. Bed conditions were randomized with side rails up or down and one low bed with side rails down. We explored the patients’ use of the side rails, bed height, ability to lift their legs onto the mattress, and ability to turn, egress, and walk back to the chair. The standard bed was too high for some participants, both for ingress and egress. Side rails were used by most participants when entering, turning in bed, and exiting. We recommend that side rails be reconsidered as a means to facilitate in-bed movement, ingress, and egress. Furthermore, single deck height settings for all patients are not optimal. Low beds as a safety measure must be re-evaluated. PMID:28462302

  17. Traveler's encounter with nymphs in a hotel bed.

    Science.gov (United States)

    Sandlund, Johanna; Banaei, Niaz

    2014-01-01

    This case illustrates skin lesions in a traveler staying in a hotel bed infested with tics. Although infestation of hotels with bedbugs belonging to the Cimex genus is a growing problem worldwide, tick infestation has never been reported before.

  18. Rock bed heat accumulators. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Riaz, M.

    1977-12-01

    The principal objectives of the research program on rock bed heat accumulators (or RBHA) are: (1) to investigate the technical and economic feasibility of storing large amounts of thermal energy (in the tens of MWt range) at high temperature (up to 500/sup 0/C) over extended periods of time (up to 6 months) using native earth or rock materials; (2) to conduct studies to establish the performance characteristics of large rock bed heat accumulators at various power and temperature levels compatible with thermal conversion systems; and (3) to assess the materials and environmental problems associated with the operation of such large heat accumulators. Results of the study indicate that rock bed heat accumulators for seasonal storage are both technically and economically feasible, and hence could be exploited in various applications in which storage plays an essential role such as solar power and total energy systems, district and cogeneration heating systems.

  19. Apparatus for controlling fluidized beds

    Science.gov (United States)

    Rehmat, A.G.; Patel, J.G.

    1987-05-12

    An apparatus and process are disclosed for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance. 2 figs.

  20. Fluidized bed calciner

    International Nuclear Information System (INIS)

    Sheely, W.F.

    1986-01-01

    A unique way to convert radioactive scrap into useful nuclear fuel products was developed for the Department of Energy at Hanford. An advanced, fluidized bed calciner is used to convert metallic nitrate scrap or waste solutions into benign, solid and gaseous products. There are broad potential applications of this concept beyond those in the nuclear industry

  1. Nail Bed Injuries

    Science.gov (United States)

    ... All Topics A-Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is a Hand Therapist? Media Find a Hand Surgeon Home Anatomy Nail Bed Injuries Email to a friend * required ...

  2. Bed Bug Myths

    Science.gov (United States)

    Learn the truth about bed bugs, such as how easy they are to see with the naked eye, their preferred habitat, whether they transmit diseases, their public health effects, and whether pesticides are the best way to deal with an infestation.

  3. Flurbiprofen 8.75 mg lozenges for treating sore throat symptoms: a randomized, double-blind, placebo-controlled study.

    Science.gov (United States)

    Schachtel, Bernard P; Shephard, Adrian; Shea, Timothy; Sanner, Kathleen; Savino, Laurie; Rezuke, Jeanne; Schachtel, Emily; Aspley, Sue

    2016-11-01

    This study assessed multiple doses of flurbiprofen 8.75 mg lozenges for the relief of three prominent symptoms of acute pharyngitis: pain intensity (primary end point), difficulty swallowing and swollen throat. A total of 204 patients (102 in each group) with confirmed pharyngitis (onset ≤4 days) were randomly assigned to take up to five flurbiprofen or placebo lozenges every 3-6 h, for 7 days. Using validated rating scales (sore throat pain intensity, difficulty swallowing and swollen throat) patients rated their symptoms for the duration of the study. Over the first 24 h, patients treated with flurbiprofen lozenges reported significantly greater reductions in sore throat pain (47%) as well as difficulty swallowing (66%) and swollen throat (40%) compared with placebo (all p flurbiprofen lozenges provide effective relief of sore throat pain intensity as well as difficulty swallowing and swollen throat.

  4. 7 CFR 2902.15 - Bedding, bed linens, and towels.

    Science.gov (United States)

    2010-01-01

    ... PROCUREMENT Designated Items § 2902.15 Bedding, bed linens, and towels. (a) Definition. (1) Bedding is that... minimum biobased content is 12 percent and shall be based on the amount of qualifying biobased carbon in..., and silk are not qualifying biobased feedstocks for the purpose of determining the biobased content of...

  5. Comparative study of patients suffering sore throat after general anesthesia using laryngeal mask airway and cuffed pharyngeal tube in adults

    Directory of Open Access Journals (Sweden)

    Hassani V

    2001-09-01

    Full Text Available Post-operative sore throat is one of the most common complications and complaints of patients after general anesthesia especially in operations that need endotracheal intubations. Its causes are: size of endotracheal tube and type of its cuff, inadequate airway humidification, trauma during intubation and suctioning, high flow of inspiratory gases, surgical manipulation of airway and adjacent organs, ect. Use of instruments with less invasion to upper respiratory tract, for example, face mask and airway, LMA or CPT are methods, used for decreasing the rate of post-operative sore throat. This study was performed to compare the rate of sore throat after general anesthesia between Laryngeal Mask Airway (LMA and Cuffed Pharyngeal Tube (CPT. From the patients, 120 ASA: PS-I cases, were selected, who were candidates for elective surgery of Orthopedics, Urology, General surgery and Gynecology in Hazrat Rasool-Akram Hospital Complex in the year 2000. Their operation were performed in supine position and did not need muscle relaxation and the patients had spontaneous breathing. Duration of surgery was less than 2 hours. The patients were randomly allocated into two groups: LMA was used for one group and CPT for others. Immediately after operation, in the recovery room and at 6, 12, 18 and 24 hours after removing the tube, the patients were asked about sore throat and the results were recorded in the related sheets. The results was 31.7 percent of patients in group LMA and 0 percent of patients in group CPT, had sore throat. There were significant difference between groups (LMA and CPT in presentation of sore throat (P<0.001.

  6. Canker Sore

    Science.gov (United States)

    ... base of your gums, or on your soft palate. You might notice a tingling or burning sensation ... border) Pain that you can't control with self-care measures Extreme difficulty eating or drinking High ...

  7. Pressure Sores

    Science.gov (United States)

    ... to strengthen your muscles and improve your overall health. Talk to your doctor if physical activity is hard for you. He or she ... and Wellness Staying Healthy Healthy Living Travel Occupational Health First Aid and ... Pets and Animals myhealthfinder Food and Nutrition Healthy Food ...

  8. Sore Throats

    Science.gov (United States)

    ... since drainage from nose or sinus infections can cause throat infections as well. If you live or work in close quarters such as a child care center, classroom, office, prison, or military installation, ...

  9. Sore Society

    DEFF Research Database (Denmark)

    Fausing, Bent

    2014-01-01

    This is not brand new; in fact, I do not even mention the word selfie. However, it was very rewarding for me in terms of the intellectual and emotional richness and challenge, I got in return from working with this article and the questions and the answers it deals with. Maybe it will be good...

  10. Sore Throats

    Science.gov (United States)

    ... Patient Health Home Copyright © 2018 American Academy of Otolaryngology–Head and Neck Surgery. Reproduction or republication strictly ... Terms of Use © Copyright 2018. American Academy of Otolaryngology — Head and Neck Surgery 1650 Diagonal Rd Alexandria, ...

  11. Mouth Sores

    Science.gov (United States)

    ... Patient Health Home Copyright © 2018 American Academy of Otolaryngology–Head and Neck Surgery. Reproduction or republication strictly ... Terms of Use © Copyright 2018. American Academy of Otolaryngology — Head and Neck Surgery 1650 Diagonal Rd Alexandria, ...

  12. Cold Sores

    Science.gov (United States)

    ... Men? The History of Dental Advances Pacifiers Have Negative and Positive Effects What is Dental Amalgam (Silver Filling)? What is a Composite Resin (White Filling)? Learn what those dental words mean. Check out how your teeth and mouth change in every stage of life. More RSS ...

  13. A simple concept for covering pressure sores: wound edge-based propeller perforator flap.

    Science.gov (United States)

    Kelahmetoglu, Osman; Van Landuyt, Koenraad; Yagmur, Caglayan; Sommeling, Casper E; Keles, Musa K; Tayfur, Volkan; Simsek, Tekin; Demirtas, Yener; Guneren, Ethem

    2017-12-01

    We present a new surgical modification to allow propeller perforator flaps to cover pressure sores at various locations. We used a propeller perforator flap concept based on the detection of newly formed perforator vessels located 1 cm from the wound margin and stimulated by the chronic inflammation process. Between January 2009 and January 2017, 33 wound edge-based propeller perforator flaps were used to cover pressure sores at various locations in 28 patients. In four cases more than one flap was used on the same patient. The patients comprised 18 males and 10 females with a mean age of 41·25 (range, 16-70) years. All patients underwent follow-up for 0-12 months. The mean follow-up duration was 5·03 months. Venous congestion was observed in three flaps that were rotated by 180° (9·1%). However, there was a significant difference between flaps rotated by 90° and 180° according to the complication rate (P = 0·034). Out of 33 flaps, 29 flaps healed uneventfully. Patients were able to sit and lie on their flaps three weeks after surgery. In our study, we were able to obtain satisfying final results using these novel flaps. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  14. PROGNOSTIC FACTORS IN PATIENTS WITH PRESSURE SORES IN A UNIVERSITY HOSPITAL IN SOUTHERN BRAZIL.

    Science.gov (United States)

    Walter, Gustavo Palmeiro; Seidel, William; Giustina, Renata Della; Bins-Ely, Jorge; Maurici, Rosemeri; Narciso-Schiavon, Janaína Luz

    2017-01-01

    Despite advances in medical care, patients who are hospitalized or have spinal cord injuries often develop pressure sores. The objective of this study was to describe the epidemiological characteristics of pressure sores and evaluate factors associated with recurrence and cure. In this historical cohort study, clinical and laboratory data were collected from medical records between 1997 and 2016. Sixty individuals with pressure ulcers were included; mean patient age was 38.1±16.5 (37.0) years, 83.3% were men, and 86.8% identified as white. Most patients (85.1%) had paraplegia, amputation, or trauma of the lower limbs with motor sequelae; the remainder (14.9%) were quadriplegic. Most (78.3%) underwent surgery, and the mean follow-up time was 1.8±2.5 years. The lesions were cured in 25 patients; they recurred in 25% of the patients, and recurrence was seen to be associated with the location of the lesions. Patients with recurrent lesions had more medical consultations and a longer treatment time. Individuals whose ulcers had healed had fewer lesions, higher body mass index (BMI), and a higher proportion of these patients underwent surgery. BMI and location and number of lesions are prognostic factors. Level of Evidence IV, Case Series.

  15. Dual-dermal-barrier fashion flaps for the treatment of sacral pressure sores.

    Science.gov (United States)

    Hsiao, Yen-Chang; Chuang, Shiow-Shuh

    2015-02-01

    The sacral region is one of the most vulnerable sites for the development of pressure sores. Even when surgical reconstruction is performed, there is a high chance of recurrence. Therefore, the concept of dual-dermal-barrier fashion flaps for sacral pressure sore reconstruction was proposed. From September 2007 to June 2010, nine patients with grade IV sacral pressures were enrolled. Four patients received bilateral myocutaneous V-Y flaps, four patients received bilateral fasciocutaneous V-Y flaps, and one patient received bilateral rotation-advanced flaps for sacral pressure reconstruction. The flaps were designed based on the perforators of the superior gluteal artery in one patient's reconstructive procedure. All flaps' designs were based on dual-dermal-barrier fashion. The mean follow-up time was 16 months (range = 12-25). No recurrence was noted. Only one patient had a complication of mild dehiscence at the middle suture line, occurring 2 weeks after the reconstructive surgery. The dual-dermal fashion flaps are easily duplicated and versatile. The study has shown minimal morbidity and a reasonable outcome.

  16. Watermelon juice: potential functional drink for sore muscle relief in athletes.

    Science.gov (United States)

    Tarazona-Díaz, Martha P; Alacid, Fernando; Carrasco, María; Martínez, Ignacio; Aguayo, Encarna

    2013-08-07

    l-Citrulline is an excellent candidate to reduce muscle soreness, and watermelon is a fruit rich in this amino acid. This study investigated the potential of watermelon juice as a functional drink for athletes. An in vitro study of intestinal absorption of l-citrulline in Caco-2 cells was performed using unpasteurized (NW), pasteurized (80 °C for 40 s) watermelon juice (PW) and, as control, a standard of l-citrulline. l-citrulline bioavailability was greater when it was contained in a matrix of watermelon and when no heat treatment was applied. In the in vivo experiment (maximum effort test in a cycloergometer), seven athletes were supplied with 500 mL of natural watermelon juice (1.17 g of l-citrulline), enriched watermelon juice (4.83 g of l-citrulline plus 1.17 g from watermelon), and placebo. Both watermelon juices helped to reduce the recovery heart rate and muscle soreness after 24 h.

  17. VA National Bed Control System

    Data.gov (United States)

    Department of Veterans Affairs — The VA National Bed Control System records the levels of operating, unavailable and authorized beds at each VAMC, and it tracks requests for changes in these levels....

  18. Getting Rid of Bed Bugs

    Science.gov (United States)

    ... Directory Planning, Budget and Results Jobs and Internships Headquarters Offices Regional Offices Labs and Research Centers Bed ... to be careful in how you select a company. Related Information Collaborative Strategy on Bed Bugs - highlights ...

  19. Reducing risk of pressure sores: effects of watch prompts and alarm avoidance on wheelchair push-ups.

    Science.gov (United States)

    White, G W; Mathews, R M; Fawcett, S B

    1989-01-01

    People who use wheelchairs are at risk for developing pressure sores. Regular pressure relief, in the form of a wheelchair push-up, is one way to reduce the likelihood of pressure sores. We examined the effects of antecedent (i.e., instructions, audible prompts) and consequent (i.e., alarm avoidance) events on wheelchair push-ups, using a multiple baseline analysis with 2 participants with spina bifida. Results suggest that the combined procedure was more effective than either antecedent or consequent events alone, and there is some evidence suggesting maintenance of effects over time. PMID:2793635

  20. A novel technique for preventing skin pressure sores using a rubber tube during surgical treatment of mandibular condyle fractures.

    Science.gov (United States)

    Kawase-Koga, Yoko; Mori, Yoshiyuki; Hoshi, Kazuhito; Takato, Tsuyoshi

    2013-11-01

    Craniofacial surgery occasionally results in sores and necrosis of the facial skin because of pressure from surgical instruments. During surgical treatment of mandibular condylar process fractures, the main mandibular fragment is routinely retracted downward using a wire to achieve a satisfactory anatomic reduction. This procedure may injure the facial skin. This potential complication is easily overlooked by medical staff, but it is easily preventable. We herein describe a method of using a rubber tube to avoid causing pressure sores of the facial skin during surgical treatment of mandibular condylar process fractures.

  1. The Effects of Eccentric Contraction Duration on Muscle Strength, Power Production, Vertical Jump, and Soreness.

    Science.gov (United States)

    Mike, Jonathan N; Cole, Nathan; Herrera, Chris; VanDusseldorp, Trisha; Kravitz, Len; Kerksick, Chad M

    2017-03-01

    Mike, JN, Cole, N, Herrera, C, VanDusseldorp, T, Kravitz, L, and Kerksick, CM. The effects of eccentric contraction duration on muscle strength, power production, vertical jump, and soreness. J Strength Cond Res 31(3): 773-786, 2017-Previous research has investigated the effects of either eccentric-only training or comparing eccentric and concentric exercise on changes related to strength and power expression, but no research to date has investigated the impact of altering the duration of either the concentric or the eccentric component on these parameters. Therefore, the purpose of this study was to assess the duration of eccentric (i.e., 2-second, 4-second vs. 6-second) muscle contractions and their effect on muscle strength, power production, vertical jump, and soreness using a plate-loaded barbell Smith squat exercise. Thirty college-aged men (23 ± 3.5 years, 178 ± 6.8 cm, 82 ± 12 kg, and 11.6 ± 5.1% fat) with 3.0 ± 1.0 years of resistance training experience and training frequency of 4.3 ± 0.9 days per week were randomized and assigned to 1 of 3 eccentric training groups that incorporated different patterns of contraction. For every repetition, all 3 groups used 2-second concentric contractions and paused for 1 second between the concentric and eccentric phases. The control group (2S) used 2-second eccentric contractions, whereas the 4S group performed 4-second eccentric contractions and the 6S group performed 6-second eccentric contractions. All repetitions were completed using the barbell Smith squat exercise. All participants completed a 4-week training protocol that required them to complete 2 workouts per week using their prescribed contraction routine for 4 sets of 6 repetitions at an intensity of 80-85% one repetition maximum (1RM). For all performance data, significant group × time (G × T) interaction effects were found for average power production across all 3 sets of a squat jump protocol (p = 0.04) while vertical jump did not reach

  2. Possibility of removing condensate and scattered oil from gas-condensate field during bed flooding

    Energy Technology Data Exchange (ETDEWEB)

    Belkina, N.A.; Yagubov, M.S.

    1984-01-01

    The problem is set of evaluating the possible removal from the bed of scattered oil and condensate during flooding of the bed. For this purpose, an experimental study was made of the displacement by water from the porous medium of the oil and condensate saturating it. The obtained experimental results permit evaluation of the possible removal from the gas-condensate bed of scattered oil and condensate during flooding of the bed.

  3. Geomechanics of bedded salt

    International Nuclear Information System (INIS)

    Serata, S.; Milnor, S.W.

    1979-01-01

    Creep data from the literature search is reinterpreted by SGI, resulting in a better understanding of the temperature and stress state dependence of the octahedral creep rate and the octahedral shear strength. The concept of a transition strength between the elastic and the plastic states is in agreement with the data. The elastic and rheological properties of salt are described, and a set of constitutive equations is presented. The dependence of material properties on parameters such as temperature is considered. Findings on the permeability of salt are summarized, and the in-situ behavior of openings in bedded salt is described based on extensive engineering experience. A stress measuring system utilizing a finite element computer code is discussed. Geological factors affecting the stability of salt openings are considered, and the Stress Control Technique for designing stable openings in bedded salt formations is explained

  4. Agglomeration of bed material: Influence on efficiency of biofuel fluidized bed boiler

    Directory of Open Access Journals (Sweden)

    Ryabov Georgy A.

    2003-01-01

    Full Text Available The successful design and operation of a fluidized bed combustor requires the ability to control and mitigate ash-related problems. The main ash-related problem of biomass filing boiler is agglomeration. The fluidized bed boiler with steam capacity of 66 t/h (4 MPa, 440 °C was started up at the Arkhangelsk Paper-Pi dp-Plant in 2001. This boiler was manufactured by the Russian companies "Energosofin" and "Belenergomash" and installed instead of the existing boiler with mechanical grate. Some constructional elements and steam drum of existing boiler remained unchanged. The primary air fan was installed past the common air fan, which supply part of the air into 24 secondary airports. First operating period shows that the bed material is expanded and then operator should increase the primary air rate, and the boiler efficiency dramatically decreases. Tills paper presents some results of our investigations of fuel, bed and fly ash chemical compositions and other characteristics. Special experiments were carried out to optimize the bed drain flow rate. The influence of secondly air supply improvement on mixing with the main flow and boiler efficiency are given.

  5. Sediment transport primer: estimating bed-material transport in gravel-bed rivers

    Science.gov (United States)

    Peter Wilcock; John Pitlick; Yantao Cui

    2009-01-01

    This primer accompanies the release of BAGS, software developed to calculate sediment transport rate in gravel-bed rivers. BAGS and other programs facilitate calculation and can reduce some errors, but cannot ensure that calculations are accurate or relevant. This primer was written to help the software user define relevant and tractable problems, select appropriate...

  6. Blood flow after contraction and cuff occlusion is reduced in subjects with muscle soreness after eccentric exercise

    DEFF Research Database (Denmark)

    Souza-Silva, Eduardo; Wittrup Christensen, Steffan; Hirata, Rogerio Pessoto

    2018-01-01

    Purpose: Delayed onset muscle soreness (DOMS) occur within 1-2 days after eccentric exercise but the mechanism mediating hypersensitivity is unclear. This study hypothesized that eccentric exercise reduces the blood flow response following muscle contractions and cuff occlusion, which may result ...

  7. The posterior thigh flap for defect coverage of ischial pressure sores - a critical single-centre analysis.

    Science.gov (United States)

    Djedovic, Gabriel; Morandi, Evi M; Metzler, Julia; Wirthmann, Anna; Matiasek, Johannes; Bauer, Thomas; Rieger, Ulrich M

    2017-12-01

    The development of pressure sores is still not only an enormous economical but also a medical burden. Especially in the ischial region, the local defect coverage remains demanding as it is the main weight-bearing area in wheelchair-mobilised patients and is prone to high mobility. The purpose of our study was to report our long-time experience with the reconstruction of ischial pressure ulcers with the medially based posterior thigh flap. A retrospective analysis of all primary pressure sores grade III-IV in the ischial area, which were covered with a medially based posterior thigh flap between January 2008 and December 2014, at our department was conducted. A total of 28 patients underwent defect coverage of an ischial pressure sore with the aforementioned flap. The subgroup with complications showed a statistically significant longer hospital stay. A statistically significant correlation between age and the coincidence of comorbidities could be seen. Older patients showed significantly higher grades of pressure sores. The medially based posterior thigh flap is a safe and reliable flap design. Complication rates are comparable to other flaps. Nevertheless, in case of complications, a significantly longer duration of hospitalisation has to be taken into account. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  8. Penicillin for acute sore throat : randomised double blind trial of seven days versus three days treatment or placebo in adults

    NARCIS (Netherlands)

    Zwart, S; Sachs, APE; Ruijs, GJHM; Gubbels, JW; Hoes, AW; de Melker, RA

    2000-01-01

    Objective To assess whether treatment with penicillin for three days and the traditional treatment for seven days were equally as effective at accelerating resolution of symptoms in patients with sore throat compared with placebo. Design Randomised double blind placebo controlled trial. Setting 43

  9. How social media meet patients’ questions: YouTube™ review for mouth sores in children.

    Science.gov (United States)

    Di Stasio, D; Romano, A; Paparella, R S; Gentile, C; Serpico, R; Minervini, G; Candotto, V; Laino, L

    2018-01-01

    Recurrent aphthous stomatitis (RAS) is one of the most common causes of mouth sores in children so the management of this condition is a matter of great importance. YouTube™ is increasingly being used by patients to obtain health-related information. The aim of this work is to examine the quality of information offered by YouTube™ about mouth sores in children (MSC). Searching the term ‘mouth sores in children’, (MSC) displayed 12.300 results. Of the top 60 videos analyzed, 31 were excluded following exclusion criteria. The major source of upload was from healthcare information channels (HC-41,38%), followed by individual users (HP-25.59%), healthcare professionals (IU-17.24%) and generalist information channels (HC-13.78%); 20.69% of them deal with predisposing factors, and related pathologies, the majority of these propose home remedies (60.72%) rather than topical analgesic drugs (21.43%), antimicrobials (7.14%) and topical steroids (3.57). Most of the videos analyzed were slightly useful (68.97%). Information about mouth sores in children on YouTube™ was poor regardless of the upload source. Analyzing health content on social platforms is a starting point for providing greater quality of health-related information.

  10. Randomized clinical study comparing Compeed (R) cold sore patch to acyclovir cream 5% in the treatment of herpes simplex labialis

    DEFF Research Database (Denmark)

    Karlsmark, T.; Goodman, J.J.; Drouault, Y.

    2008-01-01

    Background Hydrocolloid technology has been proven effective in treating dermal wounds. A previous study showed that a newly developed thin hydrocolloid patch [Compeed (R) cold sore patch (CSP)] provided multiple wound-healing benefits across all stages of a herpes simplex labialis (HSL) outbreak...

  11. Development of Marjolin's ulcer following successful surgical treatment of chronic sacral pressure sore

    DEFF Research Database (Denmark)

    Knudsen, M.A.; Biering-Sørensen, Fin

    2008-01-01

    of surgical excision and successful closure of the wound, the patient developed Marjolin's ulcer 2.5 years later. Yet it illustrates the primary importance of preventing the development pressure sores, of aggressive (surgical) therapy with healing when they do arise and of taking frequent biopsies......STUDY DESIGN: Case report. OBJECTIVE: Report of an unusual case, where a Marjolin's ulcer that developed 2.5 years after surgical excision and successful closure. SETTING: Department of Plastic and Reconstructive Surgery and Burn Unit and the Clinic for Spinal Cord Injuries, Copenhagen University...... Hospital, Rigshospitalet, Copenhagen, Denmark. METHODS AND RESULTS: A 22-year-old man sustained a fracture with luxation of the 5th and 6th cervical vertebrae and loss of sensory and motor function after a diving accident (complete C8 lesion). During initial hospitalization, he developed a sacral ulcer...

  12. The Use of Magnetic Resonance Imaging in Planning a Pedicled Perforator Flap for Pressure Sores in the Gluteal Region.

    Science.gov (United States)

    Park, Sun-June; Lee, Kyeong-Tae; Jeon, Byung-Joon; Woo, Kyong-Je

    2018-04-01

    Pedicled perforator flaps (PPFs) have been widely used to treat pressure sores in the gluteal region. Selection of a reliable perforator is crucial for successful surgical treatment of pressure sores using PPFs. In this study, we evaluate the role of magnetic resonance imaging (MRI) in planning PPF reconstruction of pressure sores in the gluteal region. A retrospective chart review was performed in patients who had undergone these PPF reconstructions and who had received preoperative MRI. Preoperatively, the extent of infection and necrotic tissue was evaluated using MRI, and a reliable perforator was identified, considering the perforator location in relation to the defect, perforator size, and perforator courses. Intraoperatively, the targeted perforator was marked on the skin at the locations measured on the MRI images, and the marked location was confirmed using intraoperative handheld Doppler. Superior gluteal artery, inferior gluteal artery, or parasacral perforators were used for the PPFs. Surgical outcomes were evaluated. A total of 12 PPFs were performed in 12 patients. Superior gluteal artery perforator flaps were performed in 7 patients, inferior gluteal artery perforator flaps were performed in 3 patients, and parasacral perforator flaps were performed in 2 patients. We could identify a reliable perforator on MRI, and it was found at the predicted locations in all cases. There was only one case of partial flap necrosis. There was no recurrence of the pressure sores during the mean follow-up period of 6.7 months (range = 3-15 months). In selected patients with gluteal pressure sores, MRI is a suitable means for not only providing information about disease extent and comorbidities but also for evaluating perforators for PPF reconstructions.

  13. Expanded-bed chromatography in primary protein purification.

    Science.gov (United States)

    Anspach, F B; Curbelo, D; Hartmann, R; Garke, G; Deckwer, W D

    1999-12-31

    Chromatography in stable expanded beds enables proteins to be recovered directly from cultivations of microorganisms or cells and preparations of disrupted cells, without the need for prior removal of suspended solids. The general performance of an expanded bed is comparable to a packed bed owing to reduced mixing of the adsorbent particles in the column. However, optimal operating conditions are more restricted than in a packed bed due to the dependence of bed expansion on the size and density of the adsorbent particles as well as the viscosity and density of the feedstock. The feedstock composition may become the most limiting restriction owing to interactions of adsorbent particles with cell surfaces, DNA and other substances, leading to their aggregation and consequently to bed instabilities and channeling. Despite these difficulties, expanded-bed chromatography has found widespread applications in the large scale purification of proteins from mammalian cell and microbial feedstocks in industrial bioprocessing. The basics and implementation of expanded-bed chromatography, its advantages as well as problems encountered in the use of this technique for the direct extraction of proteins from unclarified feedstocks are addressed.

  14. Comparison of the Characteristics and Performance of Flurbiprofen 8.75 mg Spray for Sore Throat.

    Science.gov (United States)

    Veale, David; Shephard, Adrian; Adams, Verity; Lidster, Charlotte

    2017-01-01

    Sore throat sprays provide targeted relief by delivering the active ingredient directly to the site of pain. Different sprays vary in characteristics, thus affecting delivery of the active ingredient to the throat, which can impact compliance. The characteristics and performance of FLURBIPROFEN 8.75 mg SPRAY were compared with 12 other sprays. Parameters assessed included spray angle and pattern, droplet size distribution, shot weight uniformity and shot weight throughout life. Among all sprays tested WICK Sulagil Halsspray had the smallest spray angle (46°) and also the smallest diameter spray pattern (X=32.8 mm; Y=34.4 mm). Thiovalone® Buccal Spray Suspension had both the largest spray angle (82°) and largest diameter spray pattern (X=62.6 mm; Y=78.0 mm). Hasco Sept® Aerosol Spray had the smallest droplet size (Dv90=118.4 μm) whereas OKi infiammazione e dolore® 0.16% spray had the largest (Dv90=214.34 μm). In terms of shot weight uniformity, TANTUM® VERDE GOLA 0.25% spray showed the least variation (2% RSD) between shots and UNIBEN Aerosol Spray the most (23.4% RSD). Shot weight throughout life studies showed that FLURBIPROFEN 8.75 mg SPRAY had the least deviation from shot weight (1.77%) whereas OKi infiammazione e dolore® 0.16% spray deviated the most (44.9%). FLURBIPROFEN 8.75 mg SPRAY had the second smallest spray angle/pattern and droplet size distribution and also the least variation in shot weight. Different sore throat sprays vary in different attributes, affecting delivery of the active ingredient. FLURBIPROFEN 8.75 mg SPRAY performed well overall, ranking first among all sprays tested, and providing a dose which is targeted and uniformly delivered throughout the life of the bottle. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  15. Foam Rolling for Delayed-Onset Muscle Soreness and Recovery of Dynamic Performance Measures

    Science.gov (United States)

    Pearcey, Gregory E. P.; Bradbury-Squires, David J.; Kawamoto, Jon-Erik; Drinkwater, Eric J.; Behm, David G.; Button, Duane C.

    2015-01-01

    Context: After an intense bout of exercise, foam rolling is thought to alleviate muscle fatigue and soreness (ie, delayed-onset muscle soreness [DOMS]) and improve muscular performance. Potentially, foam rolling may be an effective therapeutic modality to reduce DOMS while enhancing the recovery of muscular performance. Objective: To examine the effects of foam rolling as a recovery tool after an intense exercise protocol through assessment of pressure-pain threshold, sprint time, change-of-direction speed, power, and dynamic strength-endurance. Design: Controlled laboratory study. Setting: University laboratory. Patients or Other Participants: A total of 8 healthy, physically active males (age = 22.1 ± 2.5 years, height = 177.0 ± 7.5 cm, mass = 88.4 ± 11.4 kg) participated. Intervention(s): Participants performed 2 conditions, separated by 4 weeks, involving 10 sets of 10 repetitions of back squats at 60% of their 1-repetition maximum, followed by either no foam rolling or 20 minutes of foam rolling immediately, 24, and 48 hours postexercise. Main Outcome Measure(s): Pressure-pain threshold, sprint speed (30-m sprint time), power (broad-jump distance), change-of-direction speed (T-test), and dynamic strength-endurance. Results: Foam rolling substantially improved quadriceps muscle tenderness by a moderate to large amount in the days after fatigue (Cohen d range, 0.59 to 0.84). Substantial effects ranged from small to large in sprint time (Cohen d range, 0.68 to 0.77), power (Cohen d range, 0.48 to 0.87), and dynamic strength-endurance (Cohen d = 0.54). Conclusions: Foam rolling effectively reduced DOMS and associated decrements in most dynamic performance measures. PMID:25415413

  16. Effects of acupuncture on symptoms and muscle function in delayed-onset muscle soreness.

    Science.gov (United States)

    Hübscher, Markus; Vogt, Lutz; Bernhörster, Marcus; Rosenhagen, Andreas; Banzer, Winfried

    2008-10-01

    This study was done to investigate the effects of a standardized acupuncture treatment on symptoms and muscle function in exercise-induced delayed-onset muscle soreness (DOMS). A prospective, randomized, controlled, observer and subject-blinded trial was undertaken. Twenty-two (22) healthy subjects (22-30 years; 10 males and 12 females) were randomly assigned to three treatment groups: real acupuncture (deep needling at classic acupuncture points and tender points; n = 7), sham-acupuncture (superficial needling at nonacupuncture points; n = 8), and control (no needling; n = 7). DOMS of the nondominant elbow-flexors was experimentally induced through eccentric contractions until exhaustion. The outcome measures were pain perception (visual analogue scale; VAS; range: 0-10 cm), mechanical pain threshold (MPT; pressure algometer), and maximum isometric voluntary force (MIVF; force transducer). Treatment was applied immediately, 24 and 48 hours after DOMS induction. Measurements of MPT and MIVF were made prior to DOMS induction as well as before and after every treatment session. VAS data were acquired after DOMS induction as well as pre- and post-treatment. Final pain, MPT, and MIVF measurements were performed 72 hours after DOMS induction. Following nonparametric testing, there were no significant differences between groups in outcome measures at baseline. After 72 hours, pain perception (VAS) was significantly lower in the acupuncture group compared to the sham acupuncture and control subjects. However, the mean MPT and MIVF scores were not significantly different between groups. Although acupuncture seemed to have no effects on mechanical pain threshold and muscle function, it proved to reduce perceived pain arising from exercise-induced muscle soreness.

  17. Coal Bed Methane Primer

    Energy Technology Data Exchange (ETDEWEB)

    Dan Arthur; Bruce Langhus; Jon Seekins

    2005-05-25

    During the second half of the 1990's Coal Bed Methane (CBM) production increased dramatically nationwide to represent a significant new source of income and natural gas for many independent and established producers. Matching these soaring production rates during this period was a heightened public awareness of environmental concerns. These concerns left unexplained and under-addressed have created a significant growth in public involvement generating literally thousands of unfocused project comments for various regional NEPA efforts resulting in the delayed development of public and fee lands. The accelerating interest in CBM development coupled to the growth in public involvement has prompted the conceptualization of this project for the development of a CBM Primer. The Primer is designed to serve as a summary document, which introduces and encapsulates information pertinent to the development of Coal Bed Methane (CBM), including focused discussions of coal deposits, methane as a natural formed gas, split mineral estates, development techniques, operational issues, producing methods, applicable regulatory frameworks, land and resource management, mitigation measures, preparation of project plans, data availability, Indian Trust issues and relevant environmental technologies. An important aspect of gaining access to federal, state, tribal, or fee lands involves education of a broad array of stakeholders, including land and mineral owners, regulators, conservationists, tribal governments, special interest groups, and numerous others that could be impacted by the development of coal bed methane. Perhaps the most crucial aspect of successfully developing CBM resources is stakeholder education. Currently, an inconsistent picture of CBM exists. There is a significant lack of understanding on the parts of nearly all stakeholders, including industry, government, special interest groups, and land owners. It is envisioned the Primer would being used by a variety of

  18. Infant's bed climate and bedding in the Japanese home.

    Science.gov (United States)

    Nakamura Ikeda, Rie; Fukai, Kiyoko; Okamoto Mizuno, Kazue

    2012-06-01

    to assess the bed climate of infants in their homes in Japan. descriptive, exploratory, non-experimental research design. the data were collected at the participants' homes under normal circumstances. nineteen healthy infants between the ages of two and five months. Their mothers, who joined a parenting class organised by a maternity clinic in Okayama, Japan, consented to participate in this study. we visited the infants' homes and interviewed their mothers concerning the types and use of bedding. The temperature and relative humidity of the bed climate at the back and foot of the bedding, and in the room were measured every minute for four consecutive days. Differences among the bed climates measured during three seasons (spring, summer, and autumn) were assessed by one-way analysis of variance. The bed temperature was higher for infants than for adults. No significant difference in temperature was noted among the three seasons. The bed temperature was about 36.0°C when waterproof sheets and futon mattresses for children or adult were used. The average relative humidity of the bed climate at the back was highest in summer, followed by that in spring and autumn; the differences were significant. The use of waterproof sheets and futon mattresses for children in summer increased the relative humidity to 80% or more. The use of infant beds, sunoko drainboards, and cotton futon mattresses in summer was effective in reducing the bed humidity. these results suggest that nurse-midwives should advise the parents on comfortable bed climates for their infants, as well as how to select and use bedding for them. Copyright © 2010 Elsevier Ltd. All rights reserved.

  19. Pressure sores–a constant problem for plegic patients and a permanent challenge for plastic surgery

    Science.gov (United States)

    Marinescu, S; Florescu, IP; Jecan, C

    2010-01-01

    Pressure sores–a constant problem for plegic patients and a permanent challenge for plastic surgery Pressure sores can be defined as lesions caused by unrelieved pressure resulting in damage of the underlying tissue. They represent a common problem in the pathology of plegic patients and, plastic surgery has a significant role in their treatment. Pressure sores occur over bony prominences and so, they are most commonly seen at the sacrum and trochanters in paralyzed patients and at ischium for the patients who sit in a wheelchair for a long time. For these patients, surgical treatment is very important because on one hand, it stops the loss of nutrients and proteins at the site of the pressure sore, and on the other hand, it permits the initiation of neuromuscular recuperation treatment much faster. PMID:20968200

  20. Particle bed reactor modeling

    Science.gov (United States)

    Sapyta, Joe; Reid, Hank; Walton, Lew

    The topics are presented in viewgraph form and include the following: particle bed reactor (PBR) core cross section; PBR bleed cycle; fuel and moderator flow paths; PBR modeling requirements; characteristics of PBR and nuclear thermal propulsion (NTP) modeling; challenges for PBR and NTP modeling; thermal hydraulic computer codes; capabilities for PBR/reactor application; thermal/hydralic codes; limitations; physical correlations; comparison of predicted friction factor and experimental data; frit pressure drop testing; cold frit mask factor; decay heat flow rate; startup transient simulation; and philosophy of systems modeling.

  1. Fluidised bed cereal cooking

    International Nuclear Information System (INIS)

    Jenkins, Simon Anthony

    2002-01-01

    Man has been cooking food for thousands of years for a number of reasons: to improve flavour and palatability, sterilise, increase digestibility, improve texture and colour. Increasingly more advanced techniques are employed today in food production plants to engineer foods with many different properties. With this in mind manufacturers are constantly seeking to improve processing techniques and apply new or different technologies (such as microwaves, RF and extrusion) to develop foods with new properties (like puffed texture starches) and to increase process efficiencies (energy efficiency, water reduction). This thesis reports on work undertaken to demonstrate the potential to achieve high temperature starch conversion of whole wheat grains in a fluidised bed, thereby reducing the amount of water required and processing time. Specifically, wheat from the farm at 14% water content is cooked in a fluidised bed. The fluidised bed heats the wheat quickly by convective heating. In addition, energy can be delivered directly to the grain by microwave heating during fluidisation. Degree of starch conversion is determined by measuring the reduction in size of endotherm of reaction as observed by Differential Scanning Calorimetry. The fluidising gas, processing temperature and starting moisture content were varied in order to investigate their effect on the cooking process. A mathematical model based on energy and species concentration equations was developed to help understand the internal grain processes. The model coupled the thermal energy equation with water diffusion. The effect of water evaporation was represented as a thermal sink in the energy equation. Popular kinetic models from literature were adapted to predict the degree of starch conversion. The model gives solutions consistent with experimental data and physical intuition. A commercial computational fluid dynamics package was used to study simple airflow and particle tracks in the fluidisation column. A

  2. Comparison of Effectiveness of Betamethasone gel Applied to the Tracheal Tube and IV Dexamethasone on Postoperative Sore Throat: A Randomized Controlled Trial.

    Science.gov (United States)

    Tabari, Masumeh; Soltani, Ghasem; Zirak, Nahid; Alipour, Moammad; Khazaeni, Kamran

    2013-09-01

    Postoperative sore throat is a common complaint in patients with endotracheal intubation and has potentially dangerous complications. This randomized controlled trial study investigated the incidence of postoperative sore throat after general anesthesia when betamethasone gel is applied to a tracheal tube compared with when IV dexamethasone is prescribed. Two hundred and twenty five American Society of Anesthesiologist (ASA)-class I and II patients undergoing elective abdominal surgery with tracheal intubation were randomly divided into three groups: betamethasone gel, intravenous (IV) dexamethasone, and control groups. In the post-anesthesia care unit, a blinded anesthesiologist interviewed all patients regarding postoperative sore throat at 1,6, and 24 hours after surgery. The incidence of sore throat was significantly lower in the betamethasone gel group compared with the IV dexamethasone and control groups, 1, 6, and 24 hours after surgery. In the first day after surgery 10.7% of the betamethasone group had sore throat whereas 26.7% of the IV dexamethasone group and 30.7% of the control group had sore throat. Bucking before extubation was observed in 14(18.4%), 8(10.4%), and 9(12.2%) patients, in the IV dexamethasone, betamethasone gel, and control group, respectively. We concluded that wide spread application of betamethasone gel over tracheal tubes effectively mitigates postoperative sore throat, compared with IV dexamethasone application.

  3. Comparison of Effectiveness of Betamethasone gel Applied to the Tracheal Tube and IV Dexamethasone on Postoperative sore Throat: A Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Masoomeh Tabari

    2013-10-01

    Full Text Available Introduction: Postoperative sore throat is a common complaint in patients with endotracheal intubation and has potentially dangerous complications. This randomized controlled trial study investigated the incidence of postoperative sore throat after general anesthesia when betamethasone gel is applied to a tracheal tube compared with when IV dexamethasone is prescribed.   Materials and Methods: Two hundred and twenty five American Society of Anesthesiologist (ASA-class I and II patients undergoing elective abdominal surgery with tracheal intubation were randomly divided into three groups: betamethasone gel, intravenous (IV dexamethasone, and control groups. In the post-anesthesia care unit, a blinded anesthesiologist interviewed all patients regarding postoperative sore throat at 1,6, and 24 hours after surgery.   Results: The incidence of sore throat was significantly lower in the betamethasone gel group compared with the IV dexamethasone and control groups, 1, 6, and 24 hours after surgery. In the first day after surgery 10.7% of the betamethasone group had sore throat whereas 26.7% of the IV dexamethasone group and 30.7% of the control group had sore throat. Bucking before extubation was observed in 14(18.4%, 8(10.4%, and 9(12.2% patients, in the IV dexamethasone, betamethasone gel, and control group, respectively.   Conclusion:  We concluded that wide spread application of betamethasone gel over tracheal tubes effectively mitigates postoperative sore throat, compared with IV dexamethasone application.

  4. Statistical description of flume experiments on mixed-size bed-load transport and bed armoring processes

    Science.gov (United States)

    Chen, D.; Zhang, Y.

    2008-12-01

    The objective of this paper is to describe the statistical properties of experiments on non-uniform bed-load transport as well as the mechanism of bed armoring processes. Despite substantial effort made over the last two decades, the ability to compute the bed-load flux in a turbulent system remains poor. The major obstacles include the poor understanding of the formation of armor lays on bed surfaces. Such a layer is much flow-resistible than the underlying material and therefore significantly inhibits sediment transport from the reach. To study the problem, we conducted a flume study for mixed sand/gravel sediments. We observed that aggregated sediment blocks were the most common characters in armor layers - the largest sizes resist hydraulic forces, while the smaller sizes add interlocking support and prevent loss of fine material through gaps between the larger particles. Fractional transport rates with the existing of armor layers were measured with time by sediment trapping method at the end of flume. To address the intermittent and time-varying behavior of bed-load transport during bed armoring processes, we investigated the probability distribution of the fractional bed-load transport rates, and the underlying dynamic model derived from the continuous time random walk framework. Results indicate that it is critical to consider the impact of armor layers when a flow is sufficient to move some of the finer particles and yet insufficient to move all the larger particles on a channel bed.

  5. Bed rest during pregnancy

    Science.gov (United States)

    ... ER. Multiple gestations. In: Gabbe SG, Niebyl JR, Simpson JL, et al, eds. Obstetrics: Normal and Problem ... labor and birth. In: Gabbe SG, Niebyl JR, Simpson JL, et al, eds. Obstetrics: Normal and Problem ...

  6. Fluidized bed boiler feed system

    Science.gov (United States)

    Jones, Brian C.

    1981-01-01

    A fluidized bed boiler feed system for the combustion of pulverized coal. Coal is first screened to separate large from small particles. Large particles of coal are fed directly to the top of the fluidized bed while fine particles are first mixed with recycled char, preheated, and then fed into the interior of the fluidized bed to promote char burnout and to avoid elutriation and carryover.

  7. Status of the fluidized bed unit

    International Nuclear Information System (INIS)

    Williams, P.M.; Wade, J.F.

    1994-01-01

    Rocky Flats has a serious mixed waste problem. No technology or company has a license and available facilities to remedy this dilemma. One solution under study is to use a catalytic fluidized bed unit to destroy the combustible portion of the mixed waste. The fluidized bed thermal treatment program at Rocky Flats is building on knowledge gained over twenty years of successful development activity. The FBU has numerous technical advantages over other thermal technologies to treat Rocky Flats' mixed waste, the largest being the lower temperature (700 degrees C versus 1000 degrees C) which reduces acid corrosion and mechanical failures and obviates the need for ceramic lining. Successful demonstrations have taken place on bench, pilot, and full-scale tests using radioactive mixed wastes. The program is approaching implementation and licensing of a production-scale fluidized bed system for the safe treatment of mixed waste. The measure for success on this project is the ability to work closely with the community to jointly solve problems and respond to concerns of mixed waste treatment at Rocky Flats

  8. Management bedding : vrijloopstal met composterende bedding van houtsnippers

    NARCIS (Netherlands)

    Boer, de H.C.; Wiersma, M.; Galama, P.J.; Szanto, G.L.

    2015-01-01

    In de vrijloopstal liggen de koeien meestal op een organische bedding en scheiden daar mest (feces en urine) uit. Om de bedding voldoende droog en schoon te houden wordt er regelmatig nieuw strooisel aangevoerd en wordt de toplaag bewerkt. Op basis van onderzoek- en praktijkervaringen tot nu toe

  9. Efficacy of flurbiprofen 8.75 mg lozenge in patients with a swollen and inflamed sore throat.

    Science.gov (United States)

    Aspley, Sue; Shephard, Adrian; Schachtel, Emily; Sanner, Kathleen; Savino, Laurie; Schachtel, Bernard

    2016-09-01

    Sore throat is often over-treated with antibiotics, therefore there is a need for non-antibiotic treatments that provide effective relief. From the patient's point of view, symptoms of pharyngeal inflammation such as a "swollen" and "inflamed" throat are often considered the most bothersome; so, a non-steroidal anti-inflammatory drug could be an appropriate treatment. We investigated the efficacy and safety of flurbiprofen 8.75 mg lozenge in adults with a swollen and inflamed throat. We enrolled adults with moderate-to-severe sore throat and evidence of tonsillo-pharyngitis into a randomized, double-blind study. Patients received flurbiprofen 8.75 mg or placebo lozenges every 3-6 hours as needed (up to five lozenges in 24 hours) and rated their symptoms (sore throat pain, difficulty swallowing and the sensation of a swollen throat) on standard linear scales regularly over 24 hours. The efficacy of flurbiprofen lozenge was determined in patients reporting a swollen and inflamed throat at baseline, as well as those with relatively severe symptoms. ClinicalTrials.gov NCT01049334. The main outcome measures were the time-weighted summed differences in patient-reported sore throat pain, difficulty swallowing and swollen throat over 24 hours. Out of 204 patients, 124 (60.8%) described their throats as swollen and inflamed at baseline. Flurbiprofen lozenges provided greater relief than placebo over 24 hours: 79.8%, 99.6% and 69.3% (for sore throat pain, difficulty swallowing and swollen throat, respectively, all P ≤ 0.01). These outcomes were more substantial in patients with relatively severe symptoms. No serious or unexpected adverse events occurred. Flurbiprofen 8.75 mg lozenge appears to provide effective, well-tolerated relief of sore throat, difficulty swallowing and swollen throat in adults with a swollen and inflamed throat, as well as those with relatively severe symptoms. A limitation of these findings is that, while predetermined, these are

  10. Cold-water immersion (cryotherapy for preventing and treating muscle soreness after exercise

    Directory of Open Access Journals (Sweden)

    Chris Bleakley

    Full Text Available BACKGROUND: Many strategies are in use with the intention of preventing or minimizing delayed onset muscle soreness and fatigue after exercise. Cold-water immersion, in water temperatures of less than 15 °C, is currently one of the most popular interventional strategies used after exercise. OBJECTIVES: To determine the effects of cold-water immersion in the management of muscle soreness after exercise. SEARCH METHODS: In February 2010, we searched the Cochrane Bone, Joint and Muscle Trauma Group Specialised Register, the Cochrane Central Register of Controlled Trials (The Cochrane Library (2010, Issue 1, Medline, Embase, Cumulative Index to Nursing and Allied Health (CINAHL, British Nursing Index and archive (BNI, and the Physiotherapy Evidence Database (PEDro. We also searched the reference lists of articles, handsearched journals and conference proceedings and contacted experts. In November 2011, we updated the searches of Central (2011, Issue 4, Medline (up to November Week 3 2011, Embase (to 2011 Week 46 and CINAHL (to 28 November 2011 to check for more recent publications. SELECTION CRITERIA: Randomized and quasi-randomized trials comparing the effect of using cold-water immersion after exercise with: passive intervention (rest/no intervention, contrast immersion, warm-water immersion, active recovery, compression, or a different duration/dosage of cold-water immersion. Primary outcomes were pain (muscle soreness or tenderness (pain on palpation, and subjective recovery (return to previous activities without signs or symptoms. DATA COLLECTION AND ANALYSIS: Three authors independently evaluated study quality and extracted data. Some of the data were obtained following author correspondence or extracted from graphs in the trial reports. Where possible, data were pooled using the fixed-effect model. MAIN RESULTS: Seventeen small trials were included, involving a total of 366 participants. Study quality was low. The temperature, duration and

  11. Effectiveness of Bed Bug Pesticides

    Science.gov (United States)

    Before EPA allows a bed bug claim on a label, the product must be supported by data showing it will kill bed bugs when applied according to the label. Also consider factors such as extent of infestation, site preparation, and insect life stages.

  12. A uranium bed with ceramic body for tritium storage

    Energy Technology Data Exchange (ETDEWEB)

    Khapov, A.S.; Grishechkin, S.K.; Kiselev, V.G. [' All Russia Research Institute of Automatics' - FSUE VNIIA, Moscow (Russian Federation)

    2015-03-15

    It is widely recognized that ceramic coatings provide an attractive solution to lower tritium permeation in structural materials. Alumina based ceramic coatings have the highest permeation reduction factor for hydrogen. For this reason an attempt was made to apply crack-free low porous ceramics as a structural material of a bed body for tritium storage in a setup used for hydrogenating neutron tube targets at VNIIA. The present article introduces the design of the bed. This bed possesses essentially a lower hydrogen permeation factor than traditionally beds with stainless steel body. Bed heating in order to recover hydrogen from the bed is suggested to be implemented by high frequency induction means. Inductive heating allows decreasing the time necessary for tritium release from the bed as well as power consumption. Both of these factors mean less thermal power release into glove box where a setup for tritium handling is installed and thus causes fewer problems with pressure regulations inside the glove box. Inductive heating allows raising tritium sorbent material temperature up to melting point. The latter allows achieving nearly full tritium recovery.

  13. Performance of Sandy Dry Beds for sludge dewatering

    International Nuclear Information System (INIS)

    Al-Muzaini, S.

    2003-01-01

    Sludge produced by the Jahra treatment plant was assessed. The assessment was directed at determining the performance of sand drying beds. The assessment of quality of the sludge produced was based on the standards for land application of sewage sludge. Analyses were carried out for trace heavy metals and bacteria. The results of analyses showed that the sludge produced was high in organic matter and sand content but low in heavy metals. The collected data indicated that the sand drying beds at the Jahra treatment plant are at present inadequate to handle the projected sludge production. The investigation showed that the sand drying beds are fully used and the plant will require 3-4 times the capacity of the existing drying beds when the plant becomes fully operational. In addition, these sand drying beds are subjected to uncontrollable conditions such as temperature, rainfall and sludge drainage rate. Thus, sand drying beds have become less popular as a dewatering system. This paper evaluates the performance of the existing sand drying beds and suggests the most appropriate technology to alleviate the above mentioned problems. (author)

  14. Amylmetacresol/2,4-dichlorobenzyl alcohol, hexylresorcinol, or carrageenan lozenges as active treatments for sore throat

    Directory of Open Access Journals (Sweden)

    Morokutti-Kurz M

    2017-02-01

    Full Text Available Martina Morokutti-Kurz, Christine Graf, Eva Prieschl-Grassauer Marinomed Biotechnologie GmbH, Vienna, Austria Abstract: Up to 80% of sore throats are caused by viruses. Several over the counter products are available which provide symptomatic, not causal relief. For such lozenges, containing the antiseptics and local anesthetics amylmetacresol (AMC and 2,4-dichlorobenzyl alcohol (DCBA or hexylresorcinol (HR, recently an additional virucidal effect was published. Therefore, we tested a set of Strepsils® lozenges, containing either HR (Max [#2] or AMC/DCBA (Original [#3], Extra Strong [#4], Warm [#5], Orange and Vitamin C [#6], Sugar free Lemon [#7], Children/Strawberry [#8] and Soothing Honey and Lemon [#9] for their antiviral efficiency against representatives of respiratory viruses known to cause sore throat: human rhinovirus (HRV 1a, HRV8, influenza virus A H1N1n, Coxsackievirus A10, and human coronavirus (hCoV OC43. The lozenges were tested head to head with Coldamaris® lozenges (#1, which contain the patented antiviral iota-carrageenan. None of the tested AMC/DCBA or HR containing lozenges shows any antiviral effectiveness against HRV8 at the tested concentrations, whereas all are moderately active against HRV1a. Only lozenge #5 shows any activity against hCoV OC43 and Coxsackievirus A10 at the tested concentrations. Similarly, only lozenge #3 is moderately active against influenza A H1N1n virus. The data indicates that neither the isolated effect of the active ingredients nor the pH but rather one or more of the excipients of the specific formulations are responsible for the antiviral effect of some of the AMC/DCBA or HR containing lozenges. In contrast, carrageenan-containing lozenges are highly active against all viruses tested. In another experiment, we showed that binding and inactivation of virus particles by iota-carrageenan are fast and highly effective. During the residence time of the lozenge in the mouth, the viral titer is

  15. Antibiotic prescription strategies for acute sore throat: a prospective observational cohort study.

    Science.gov (United States)

    Little, Paul; Stuart, Beth; Hobbs, F D Richard; Butler, Chris C; Hay, Alastair D; Delaney, Brendan; Campbell, John; Broomfield, Sue; Barratt, Paula; Hood, Kerenza; Everitt, Hazel; Mullee, Mark; Williamson, Ian; Mant, David; Moore, Michael

    2014-03-01

    Data from trials suggest that antibiotics reduce the risk of complications of sore throat by at least 50%, but few trials for complications have been done in modern settings, and datasets of delayed antibiotic prescription are underpowered. Observational evidence is important in view of poor compliance with antibiotic treatment outside trials, but no prospective observational cohort studies have been done to date. We generated a large prospective cohort from the DESCARTE study, and the PRISM component of DESCARTE, of 12,829 adults presenting with sore throat (≤ 2 weeks duration) in primary care. Our follow-up of the cohort was based on a detailed and structured review of routine medical records, and analysis of the comparison of three antibiotic prescription strategies (no antibiotic prescription, immediate antibiotic prescription, and delayed antibiotic prescription) to control for the propensity to prescribe antibiotics. Information about antibiotic prescription was recorded in 12,677 individuals (4805 prescribed no antibiotics, 6088 prescribed antibiotics immediately, and 1784 prescribed delayed antibiotics). We documented by review of patients' notes (n=11,950) the development of suppurative complications (eg, quinsy, impetigo and cellulitis, otitis media, and sinusitis) or reconsultation with new or non-resolving symptoms). We used multivariate analysis to control for variables significantly related to the propensity to prescribe antibiotics and for clustering by general practitioner. 164 (1.4%) of the 11,950 patients with information available developed complications; otitis media and sinusitis were the most common complications (101 patients [62%]). Compared with no antibiotic prescription, immediate antibiotic prescription was associated with fewer complications (adjusted risk ratio [RR] 0.62, 95% CI 0.43-0.91, estimated number needed to treat [NNT 193) as was delayed prescription of antibiotics (0.58, 0.34-0.98; NNT 174). 1787 of the 11,950 patients (15

  16. Marine oil dietary supplementation reduces delayed onset muscle soreness after a 30 km run

    Directory of Open Access Journals (Sweden)

    Baum K

    2013-05-01

    Full Text Available Klaus Baum,1 Richard D Telford,2 Ross B Cunningham,3 1Trainingsinstitut Prof Baum, Köln, Germany; 2College of Medicine, Biology, and Environment, Australian National University, Canberra, ACT, Australia; 3The Fenner School of Environment and Society, Australian National University, Canberra, ACT, Australia Objective: Runners are prone to delayed onset muscle soreness (DOMS during long distance training. This especially holds for unaccustomed training volumes at moderate to high intensities. We investigated the effects of a marine oil complex, PCSO-524®, derived from the New Zealand green-lipped mussel (formulated as Lyprinol® and Omega XL® on DOMS after a 30 km training run. Methods: Initially, peak oxygen uptake of 32 distance runners (4 female, 28 male; median age 45 years, range 28–53 was measured on a treadmill with a 1.5 km hour-1 increase every 4 minutes starting from 8.5 km hour-1. At least 1-week after this initial test, they participated in a 30 km road run at a speed corresponding to about 70% of their individual peak oxygen uptake on a flat terrain. Before and after (0, 24, and 48 hours the run, blood concentration of creatine kinase (CK were measured and pain sensation was determined (pain scale from 0 = no pain to 10 = extremely painful. Runners were then matched in pairs based on maximal CK and peak oxygen uptake, and allocated randomly into two different groups. One group was supplemented with 400 mg per day of PCSO-524® for 11 weeks, the other group with an olive oil placebo. After that period, CK and pain sensations were remeasured following a second 30 km run at the same speed and on the same terrain. Results: The general pattern of soreness in the PCSO-524® supplemented group was reduced by 1.1 units (standard error 0.41 compared to the placebo (P < 0.05, the effects being greater in lesser trained runners (P < 0.05. CK levels were positively associated with pain sensation (P < 0.05, but trends toward lower CK in the

  17. Blood flow after contraction and cuff occlusion is reduced in subjects with muscle soreness after eccentric exercise

    DEFF Research Database (Denmark)

    Souza-Silva, Eduardo; Wittrup Christensen, Steffan; Hirata, Rogerio Pessoto

    2018-01-01

    Purpose: Delayed onset muscle soreness (DOMS) occur within 1-2 days after eccentric exercise but the mechanism mediating hypersensitivity is unclear. This study hypothesized that eccentric exercise reduces the blood flow response following muscle contractions and cuff occlusion, which may result...... anterior muscle. All measures were done bilaterally at day-0 (pre-exercise), day-2 and day-6 (post-exercise). Subjects scored the muscle soreness on a Likert scale for 6 days. Results: Eccentric exercise increased Likert scores at day-1 and day-2 compared with day-0 (P... in accumulated algesic substances being a part of the sensitization in DOMS. Methods: Twelve healthy subjects (5 women) performed dorsiflexion exercise (5 sets of 10 repeated eccentric contractions) in one leg, while the contralateral leg was the control. The maximal voluntary contraction (MVC) of the tibialis...

  18. Effects of winter military training on energy balance, whole-body protein balance, muscle damage, soreness, and physical performance.

    Science.gov (United States)

    Margolis, Lee M; Murphy, Nancy E; Martini, Svein; Spitz, Marissa G; Thrane, Ingjerd; McGraw, Susan M; Blatny, Janet-Martha; Castellani, John W; Rood, Jennifer C; Young, Andrew J; Montain, Scott J; Gundersen, Yngvar; Pasiakos, Stefan M

    2014-12-01

    Physiological consequences of winter military operations are not well described. This study examined Norwegian soldiers (n = 21 males) participating in a physically demanding winter training program to evaluate whether short-term military training alters energy and whole-body protein balance, muscle damage, soreness, and performance. Energy expenditure (D2(18)O) and intake were measured daily, and postabsorptive whole-body protein turnover ([(15)N]-glycine), muscle damage, soreness, and performance (vertical jump) were assessed at baseline, following a 4-day, military task training phase (MTT) and after a 3-day, 54-km ski march (SKI). Energy intake (kcal·day(-1)) increased (P balance was lower (P military training provide the basis for future studies to evaluate nutritional strategies that attenuate protein loss and sustain performance during severe energy deficits.

  19. Efficacy of flurbiprofen 8.75 mg spray in patients with sore throat due to an upper respiratory tract infection: A randomised controlled trial.

    Science.gov (United States)

    de Looze, Ferdinandus; Russo, Marc; Bloch, Mark; Montgomery, Barney; Shephard, Adrian; Smith, Gary; Aspley, Sue

    2016-06-01

    Viral infections cause most cases of pharyngitis (sore throat); consequently, antibiotics are generally not warranted. However, a treatment targeting pain and inflammation, e.g. a topical non-steroidal anti-inflammatory spray, may be helpful for patients. To evaluate the efficacy and safety of flurbiprofen 8.75 mg spray. This randomised, double-blind, parallel group study was conducted at six community-based clinical research centres in Australia and two in New Zealand. Adults with sore throat due to upper respiratory tract infection (onset ≤ four days) took one dose of flurbiprofen (n = 249) or placebo spray (n = 256); after six hours, they could re-dose every three-six hours as required, for three days (max. five doses/day). The primary endpoint was the area under the change from baseline curve in throat soreness from zero-two hours (AUC0-2h). The change from baseline in other sore throat symptoms also assessed efficacy. The mean AUC0-2h for throat soreness was significantly greater with flurbiprofen spray (-1.82; 95% CI: -1.98 to 1.65) compared with placebo (-1.13; 95% CI: -1.27 to 0.99) (P flurbiprofen spray compared with placebo from the first time-points assessed (five minutes for throat soreness/difficulty swallowing, 20 minutes for sore throat pain intensity and 30 minutes for swollen throat) for up to six hours (P Flurbiprofen spray provides rapid and long-lasting relief from sore throat symptoms, and is well-tolerated over three days.

  20. Chemical Characterization of Bed Material Coatingsby LA-ICP-MS and SEM-EDS

    Science.gov (United States)

    Piispanen, M. H.; Mustonen, A. J.; Tiainen, M. S.; Laitinen, R. S.

    Bed material coatings and the consequent agglomeration of bed material are main ash-related problems in FB-boilers. The bed agglomeration is a particular problem when combusting biofuels and waste materials. Whereas SEM-EDS together with automated image processing has proven to be a convenient method to study compositional distribution in coating layers and agglomerates, it is a relatively expensive technique and is not necessarily widely available. In this contribution, we explore the suitability of LA-ICP-MS to provide analogous information of the bed.

  1. EFFECTS OF TWO DIFFERENT DOSAGE OF BCAA SUPPLEMENTATION ON SERUM INDICES OF MUSCLE DAMAGE AND SORENESS IN SOCCER PLAYERS

    Directory of Open Access Journals (Sweden)

    Payam Mohamad-Panahi

    2013-06-01

    Full Text Available The purpose of this study was to investigation of the effects of two different dose of BCAA supplementation on serum indices of muscle damage and soreness in soccer players. 30 male soccer players (age: 20.2+-0.6 yr participated as subjects in this study. Subjects were randomly divided into three groups (double-blind design. All subjects performed lower- body resistance exercise (6 sets, 10 repetitions, 70% 1RM. The BCAA was given at doses of 200 and 450 mg.kg -1 BW for supplemental groups 1 and 2, respectively, 30 minutes before and after to exercise tests and carbohydrate was given at dose of 200 mg.kg -1 BW for placebo group. To identify enzymes activity (IU/L, venous blood samples were collected 30 min prior to exercise and at 24 and 48 hrs post exercise. Data were statistically analyzed using repeated measures ANOVA and Bonfferoni test. Baseline CK, CK-MB and muscle soreness were determined 30 minutes before the exercise test. Baseline serum values for CK, CK-MB and baseline muscle soreness were not different between groups in the 30 minutes before the exercise test (p>0/05. However, there were significant increases between the pre-exercise and post-exercise values for CK, CK-MB and muscle soreness from 24 hrs to 48 hrs post-test (p<0/05, but there were no significant differences between two groups (p< 0.05(. These results suggested that two different dosages of BCAA supplementation did not affect muscle damage and muscle sureness during resistance exercise bout in soccer players.

  2. Sore throat: effective communication delivers improved diagnosis, enhanced self-care and more rational use of antibiotics.

    Science.gov (United States)

    van der Velden, A W; Bell, J; Sessa, A; Duerden, M; Altiner, A

    2013-11-01

    The majority of throat infections are of viral origin and resolve without antibiotic treatment. Despite this, antibiotic use for sore throat infections remains high, partly because it is difficult to determine when antibiotics may be useful, on the basis of physical findings alone. Antibiotics may be beneficial in bacterial throat infections under certain clinical and epidemiological circumstances; however, even many of those infections in which bacteria play a role do resolve just as quickly without antibiotics. Furthermore, non-medical factors such as patient expectations and patient pressure are also important drivers of antibiotic use. To address these issues, a behavioural change is required that can be facilitated by improved communication between primary healthcare providers and patients. In this article, we provide doctors, nurses and pharmacy staff, working in primary care or in the community, with a structured approach to sore throat management, with the aim of educating and empowering patients to self-manage their condition. The first component of this approach involves identifying and addressing patients' expectations and concerns with regard to their sore throat and eliciting their opinion on antibiotics. The second part is dedicated to a pragmatic assessment of the severity of the condition, with attention to red-flag symptoms and risk factors for serious complications. Rather than just focusing on the cause (bacterial or viral) of the upper respiratory tract infections as a rationale for antibiotic use, healthcare providers should instead consider the severity of the patient's condition and whether they are at high risk of complications. The third part involves counselling patients on effective self-management options and providing information on the expected clinical course. Such a structured approach to sore throat management, using empathetic, non-paternalistic language, combined with written patient information, will help to drive patient

  3. Potential health impacts of burning coal beds and waste banks

    Science.gov (United States)

    Finkelman, R.B.

    2004-01-01

    Uncontrolled release of pollutants from burning coal beds and waste banks presents potential environmental and human health hazards. On a global scale, the emissions of large volumes of greenhouse gases from burning coal beds may contribute to climate change that alters ecosystems and patterns of disease occurrence. On regional and local scales, the emissions from burning coal beds and waste banks of acidic gases, particulates, organic compounds, and trace elements can contribute to a range of respiratory and other human health problems. Although there are few published reports of health problems caused by these emissions, the potential for problems can be significant. In India, large numbers of people have been displaced from their homes because of health problems caused by emissions from burning coal beds. Volatile elements such as arsenic, fluorine, mercury, and selenium are commonly enriched in coal deposits. Burning coal beds can volatilize these elements, which then can be inhaled, or adsorbed on crops and foods, taken up by livestock or bioaccumulated in birds and fish. Some of these elements can condense on dust particles that can be inhaled or ingested. In addition, selenium, arsenic, lead, tin, bismuth, fluorine, and other elements condense where the hot gaseous emissions come in contact with ambient air, forming mats of concentrated efflorescent minerals on the surface of the ground. These mats can be leached by rainwater and washed into local water bodies providing other potential routes of exposure. Although there are little data linking burning coal beds and waste banks to known health problems, a possibly analogous situation exists in rural China where mineralized coal burned in a residential environment has caused widespread and severe health problems such as fluorosis and arseniasis. ?? 2004 Elsevier B.V. All rights reserved.

  4. [Thigh and leg musculo-cutaneous island flap for giant bilateral trochanteric and perineal pressure sores coverage: Extreme treatment in spinal cord injury].

    Science.gov (United States)

    André, A; Crouzet, C; De Boissezon, X; Grolleau, J-L

    2015-06-01

    Surgical treatment of perineal pressure sores could be done with various fascio-cutaneous or musculo-cutaneous flaps, which provide cover and filling of most of pressure sores after spinal cord injuries. In rare cases, classical solutions are overtaken, then it is necessary to use more complex techniques. We report a case of a made-to-measure lower limb flap for coverage of confluent perineal pressure sores. A 49-year-old paraplegic patient developed multiple pressure sores on left and right ischial tuberosity, inferior pubic bone and bilateral trochanters with hips dislocation. Surgical treatment involved a whole right thigh flap to cover and fill right side lesions, associated to a posterior right leg musculo-cutaneous island flap to cover and fill the left trochanteric pressure sore. The surgical procedure lasted 6.5 hours and required massive blood transfusion. Antibiotics were adapted to bacteriological samples. There were no postoperative complications; complete wound healing occurred after three weeks. A lower limb sacrifice for coverage of a giant perineal pressure sores is an extreme surgical solution, reserved to patients understanding the issues of this last chance procedure. A good knowledge of vascular anatomy is an essential prerequisite, and allows to shape made-to-measure flaps. The success of such a procedure is closely linked to the collaboration with the rehabilitation team (appropriate therapeutic education concerning transfers and positioning). Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  5. The influence of an artificial playing surface on injury risk and perceptions of muscle soreness in elite Rugby Union.

    Science.gov (United States)

    Williams, S; Trewartha, G; Kemp, S P T; Michell, R; Stokes, K A

    2016-01-01

    This prospective cohort study investigated the influence of an artificial playing surface on injury risk and perceptions of muscle soreness in elite English Premiership Rugby Union players. Time loss (from 39.5 matches) and abrasion (from 27 matches) injury risk was compared between matches played on artificial turf and natural grass. Muscle soreness was reported over the 4 days following one match played on each surface by 95 visiting players (i.e., normally play on natural grass surfaces). There was a likely trivial difference in the overall injury burden relating to time-loss injuries between playing surfaces [rate ratio = 1.01, 90% confidence interval (CI): 0.73-1.38]. Abrasions were substantially more common on artificial turf (rate ratio = 7.92, 90% CI: 4.39-14.28), although the majority of these were minor and only two resulted in any reported time loss. Muscle soreness was consistently higher over the 4 days following a match on artificial turf in comparison with natural grass, although the magnitude of this effect was small (effect sizes ranging from 0.26 to 0.40). These results suggest that overall injury risk is similar for the two playing surfaces, but further surveillance is required before inferences regarding specific injury diagnoses and smaller differences in overall injury risk can be made. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Influence of fatigue, stress, muscle soreness and sleep on perceived exertion during submaximal effort.

    Science.gov (United States)

    Haddad, Monoem; Chaouachi, Anis; Wong, Del P; Castagna, Carlo; Hambli, Mourad; Hue, Olivier; Chamari, Karim

    2013-07-02

    The aim of this study was to assess the effects of the Hooper's Index variations (i.e., self-ratings of fatigue, stress, delayed onset muscle soreness (DOMS), and sleep) on rating of perceived exertion during a 10 min submaximal exercise training session (RPE-10 min) and then check the stability and the internal consistency of RPE-10 min. Seventeen junior soccer players took part in this study. The individual Hooper's indices taken before each training session were correlated with RPE-10 min during a constant intensity and duration effort (10 min) using Pearson product moment correlation. Intraclass correlation (ICC) was used to assess the internal consistency of the RPE-10 min. All individual correlations between RPE-10 min and quality of sleep and quantity of fatigue, stress, and DOMS were non-significant (p>0.05). No significant correlations were resulted between RPE-10 min and Hooper's Index in all athletes. The ICC of RPE-10 min was 0.77 thus demonstrating internal consistency. The results of the present study demonstrated the objectivity and utility of RPE as a psychological tool for monitoring training during traditional soccer training. Therefore, the results of the present study suggest that fatigue, stress, DOMS and sleep are not major contributors of perceived exertion during traditional soccer training without excessive training loads. It seems that psychobiological factors other than fatigue, stress, DOMS and sleep may have mediated the 10 min exercise perceptual intensity. © 2013.

  7. Design of a Novel Two-Component Hybrid Dermal Scaffold for the Treatment of Pressure Sores.

    Science.gov (United States)

    Sharma, Vaibhav; Kohli, Nupur; Moulding, Dale; Afolabi, Halimat; Hook, Lilian; Mason, Chris; García-Gareta, Elena

    2017-11-01

    The aim of this study is to design a novel two-component hybrid scaffold using the fibrin/alginate porous hydrogel Smart Matrix combined to a backing layer of plasma polymerized polydimethylsiloxane (Sil) membrane to make the fibrin-based dermal scaffold more robust for the treatment of the clinically challenging pressure sores. A design criteria are established, according to which the Sil membranes are punched to avoid collection of fluid underneath. Manual peel test shows that native silicone does not attach to the fibrin/alginate component while the plasma polymerized silicone membranes are firmly bound to fibrin/alginate. Structural characterization shows that the fibrin/alginate matrix is intact after the addition of the Sil membrane. By adding a Sil membrane to the original fibrin/alginate scaffold, the resulting two-component scaffolds have a significantly higher shear or storage modulus G'. In vitro cell studies show that dermal fibroblasts remain viable, proliferate, and infiltrate the two-component hybrid scaffolds during the culture period. These results show that the design of a novel two-component hybrid dermal scaffold is successful according to the proposed design criteria. To the best of the authors' knowledge, this is the first study that reports the combination of a fibrin-based scaffold with a plasma-polymerized silicone membrane. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Herbs and natural supplements in the prevention and treatment of delayed-onset muscle soreness

    Directory of Open Access Journals (Sweden)

    Abbas Meamarbashi

    2017-01-01

    Full Text Available Objective:  Unaccustomed and intense eccentric exercise is a common cause of delayed-onset muscle soreness (DOMS. There are multiple remedies for the treatment of DOMS, but its clinical and laboratory pieces of evidence are scarce. Currently, the treatments proposed for DOMS are numerous and include pharmaceuticals, herbal remedies, stretching, massage, nutritional supplements, and other alternatives. To find a holistic treatment with effective pain relief and minimum side effects, complementary and alternative medicine, including herbal therapies, plays a main role.Methods: In this review, the existing published studies investigating the efficacy of herbal and natural supplementation therapies for the prevention or treatment of side effects, symptoms, and signs of DOMS are summarized.Results: Previous studies have documented the efficacy of herbal therapies to treat pain, inflammation, as well as laboratory and clinical side effects of DOMS.Conclusion: The use of herbs in DOMS seems safer and has lower side effects than pharmacotherapy. However, the potential for side effects and drug interactions should be considered.

  9. The Effects of Pre-Exercise Ginger Supplementation on Muscle Damage and Delayed Onset Muscle Soreness.

    Science.gov (United States)

    Matsumura, Melissa D; Zavorsky, Gerald S; Smoliga, James M

    2015-06-01

    Ginger possesses analgesic and pharmacological properties mimicking non-steroidal antiinflammatory drugs. We aimed to determine if ginger supplementation is efficacious for attenuating muscle damage and delayed onset muscle soreness (DOMS) following high-intensity resistance exercise. Following a 5-day supplementation period of placebo or 4 g ginger (randomized groups), 20 non-weight trained participants performed a high-intensity elbow flexor eccentric exercise protocol to induce muscle damage. Markers associated with muscle damage and DOMS were repeatedly measured before supplementation and for 4 days following the exercise protocol. Repeated measures analysis of variance revealed one repetition maximum lift decreased significantly 24 h post-exercise in both groups (p ginger group (p = 0.002), and improved at 72 (p = 0.021) and 96 h (p = 0.044) only in the placebo group. Blood creatine kinase significantly increased for both groups (p = 0.015) but continued to increase only in the ginger group 72 (p = 0.006) and 96 h (p = 0.027) post-exercise. Visual analog scale of pain was significantly elevated following eccentric exercise (p ginger. In conclusion, 4 g of ginger supplementation may be used to accelerate recovery of muscle strength following intense exercise but does not influence indicators of muscle damage or DOMS. Copyright © 2015 John Wiley & Sons, Ltd.

  10. Chaotic hydrodynamics of fluidized beds

    Energy Technology Data Exchange (ETDEWEB)

    Van der Stappen, M.L.M. [Unit Process and Systems Engineering, Advanced Manufacturing Technology Group, Unilever Research Laboratorium, Vlaardingen (Netherlands)

    1996-12-31

    The major goals of this thesis are: (1) to develop and evaluate an analysis method based on techniques from non-linear chaos theory to characterize the nonlinear hydrodynamics of gas-solids fluidized beds quantitatively; and (2) to determine the dependence of the chaotic invariants on the operating conditions and investigate how the chaos analysis method can be profitably applied to improve scale-up and design of gas-solids fluidized bed reactors. Chaos theory is introduced in chapter 2 with emphasis on analysis techniques for (experimental) time series, known from literature at the start of this work (1990-1991). In chapter 3, the testing of existing and newly developed techniques on both model and fluidized bed data is described. This leads to the development of the chaos analysis method to analyze measured pressure fluctuations time series of a fluidized bed. Following, in chapter 4, this method is tested and all choices for the parameters are evaluated. The influence of the experimental parameters and external disturbances on the measurements and analysis results is discussed and quantified. The result is a chaos measurement and analysis protocol, which is further used in this work. In chapter 5, the applications to fluidized beds are discussed. It is shown that the entropy is a good measure for the characterization of the dynamical behavior of gas-solids bubbling/slugging fluidized beds. Entropy is applied to characterize the influence of the operating conditions, to assess regime transitions and to analyze dimensionless similar beds of different scale. Quantitative design correlations that relate entropy to the operating parameters (including the bed diameter) are described. Finally, it is discussed how the results of this work might be used in scaling up the chaotic dynamics of fluidized beds. The overall conclusions and outlook from this work are presented in chapter 6. 182 refs.

  11. Direct contact condensation in packed beds

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yi; Klausner, James F.; Mei, Renwei; Knight, Jessica [Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611 (United States)

    2006-12-15

    A diffusion driven desalination process was recently described where a very effective direct contact condenser with a packed bed is used to condense water vapor out of an air/vapor mixture. A laboratory scale direct contact condenser has been fabricated as a twin tower structure with two stages, co-current and countercurrent. Experiments have been operated in each stage with respective saturated air inlet temperatures of 36, 40 and 43{sup o}C. The temperature and humidity data have been collected at the inlet and exit of the packed bed for different water to air mass flow ratios that vary between 0 and 2.5. A one-dimensional model based on conservation principles has been developed, which predicts the variation of temperature, humidity, and condensation rate through the condenser stages. Agreement between the model and experiments is very good. It is observed that the countercurrent flow stage condensation effectiveness is significantly higher than that for the co-current stage. The condensation heat and mass transfer rates were found to decrease when water blockages occur within the packed bed. Using high-speed digital cinematography, it was observed that this problem can occur at any operating condition, and is dependent on the packing surface wetting characteristics. This observation is used to explain the requirement for two different empirical constants, depending on packing diameter, suggested by Onda for the air side mass transfer coefficient correlation. (author)

  12. Bed retained products in swept fixed bed (SFB) coal hydropyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Mastral, A.M.; Perez-Surio, M.J. [CSIC, Zaragosa (Spain). Inst. de Carboquimica

    1997-12-31

    The hydropyrolysis of a low rank coal in a swept fixed bed (SFB) reactor is carried out by fixing the hydrogen pressure (40 kg/cm{sup 2}), the hydrogen flow (2 l/min) and the residence time (10 min) at increasing temperatures (400 C, 500 C and 600 C) and coal bed heights (h, 1.5h, 2h, 2.5h and 3h). It is shown that the percentages of tars and char directly depend on the coal bed height and that there is not only a quantitative dependence, but also the height of the coal bed is very important and plays a relevant role on the nature of the conversion products. (orig.)

  13. Bed diameter effects and incipient slugging in gas fluidized beds

    International Nuclear Information System (INIS)

    Agarwal, P.K.

    1986-01-01

    The coalescence and growth of bubble swarms formed at the distributor of a fluidized bed gives rise to lateral as well as vertical distributions of bubble properties. However, existing models employ average bubble properties obtained largely from semi-empirical considerations. In a recent Paper, the author developed a bubble growth model based on a population balance approach. Analytical expressions were derived for the bubble characteristic distributions and averages. However, the model, developed for unconstrained growth, did not take into account the effect of the bed diameter and the possibility of slugging. In this Paper, the model is extended to take these aspects into account. A slugging criterion is also developed which is expected to be valid for the regime where incipient slugging depends on the bed height as well as the region where bed height does not significantly affect minimum slugging conditions

  14. Using multiple bed load measurements: Toward the identification of bed dilation and contraction in gravel-bed rivers

    Science.gov (United States)

    Marquis, G. A.; Roy, A. G.

    2012-02-01

    This study examines bed load transport processes in a small gravel-bed river (Béard Creek, Québec) using three complementary methods: bed elevation changes between successive floods, bed activity surveys using tags inserted into the bed, and bed load transport rates from bed load traps. The analysis of 20 flood events capable of mobilizing bed material led to the identification of divergent results among the methods. In particular, bed elevation changes were not consistent with the bed activity surveys. In many cases, bed elevation changes were significant (1 to 2 times the D50) even if the bed surface had not been activated during the flood, leading to the identification of processes of bed dilation and contraction that occurred over 10% to 40% of the bed surface. These dynamics of the river bed prevent accurate derivation of bed load transport rates from topographic changes, especially for low magnitude floods. This paper discusses the mechanisms that could explain the dilation and contraction of particles within the bed and their implications in fluvial dynamics. Bed contraction seems to be the result of the winnowing of the fine sediments under very low gravel transport. Bed dilation seems to occur on patches of the bed at the threshold of motion where various processes such as fine sediment infiltration lead to the maintenance of a larger sediment framework volume. Both processes are also influenced by flood history and the initial local bed state and in turn may have a significant impact on sediment transport and morphological changes in gravel-bed rivers.

  15. Better backs by better beds?

    DEFF Research Database (Denmark)

    Bergholdt, Kim; Fabricius, Rasmus N; Bendix, Tom

    2008-01-01

    mattresses have a positive effect on LBP, and especially a hard mattress is commonly believed to have a positive effect. METHODS: One hundred sixty CLBP patients were randomized to 1 of 3 groups, having a mattress/bed mounted in their sleeping room for 1 month. The beds were: (1) waterbed (Akva), (2) body......-conforming foam mattress (Tempur), and (3) a hard mattress (Innovation Futon). At baseline and after 4 weeks, a blinded observer interviewed the patients on LBP levels (0-10), daily function (activities of daily living, 0-30), and on the amount of sleeping hours/night. RESULTS: Because of dropout of 19 patients...... using the probably most relevant "worst case" data. There were no relevant difference between the effects of the water bed and the foam bed. CONCLUSION: The Waterbed and foam mattress' did influence back symptoms, function and sleep more positively as apposed to the hard mattress, but the differences...

  16. Top Ten Bed Bug Tips

    Science.gov (United States)

    ... Directory Planning, Budget and Results Jobs and Internships Headquarters Offices Regional Offices Labs and Research Centers Bed ... you hire an expert, be sure it’s a company with a good reputation and request that it ...

  17. Torsion testing of bed joints

    DEFF Research Database (Denmark)

    Hansen, Klavs Feilberg; Pedersen, Carsten Mørk

    2008-01-01

    This paper describes a simple test method for determining the torsion strength of a single bed joint between two bricks and presents results from testing using this test method. The setup for the torsion test is well defined, require minimal preparation of the test specimen and the test can...... be carried out directly in a normal testing machine. The torsion strength is believed to be the most important parameter in out-of-plane resistance of masonry walls subjected to bending about an axis perpendicular to the bed joints. The paper also contains a few test results from bending of small walls about...... an axis perpendicular to the bed joints, which indicate the close connection between these results and results from torsion tests. These characteristics make the torsion strength well suited to act as substitute parameter for the bending strength of masonry about an axis perpendicular to the bed joints....

  18. Fluid-bed methane proposed

    Energy Technology Data Exchange (ETDEWEB)

    1981-05-01

    The first full scale plant for the production of methane from organic waste could be built in the next few years believes M.J. Nyns of the University of Louvain, Belgium, utilizing either expanded bed or fluidised bed systems, with more than one stage, in a continuous flow arrangement. Up to 8.0 m cubed gas/m cubed digester/day could be produced with residence times reduced to 34 hours.

  19. Dispersion of Bed Load Particles

    OpenAIRE

    SAWAI, Kenji

    1987-01-01

    The motion of bed load particles is so irregular that they disperse remarkably with time.In this study, some flume tests using painted tracer particles were carried out, in which thedispersive property of tracers changed variously with sediment feed rate.In analysing this process, a stochastic simulation model is proposed where it is discussedabout the degree of exposure of individual particle near the bed surface and about the variationof its pick up rate. The exponential distribution of ste...

  20. Development of fluidized bed combustion of biomass; Leijupolttoprosessin kehittaeminen vaikeille biopolttoaineille soveltuvaksi

    Energy Technology Data Exchange (ETDEWEB)

    Hiltunen, M; Vaehaenen-Koivuluoma, T [Foster Wheeler Energia Oy, Karhula (Finland)

    1997-10-01

    Some commercial BFB boilers burning biofuels, or biofuels and industrial wood wastes have suffered serious problems in bed material sintering. In worst cases the cumulation of reactive alkali compounds has caused total sintering of bed material even during a few days` operation. This presentation reports the results obtained from three separate cases, where sintering problems occurred. Boiler A burned biofuel with quartz sand and limestone addition. Boiler B burned softwood bark and industrial wood waste with sand addition. Boiler C burned softwood bark and sludge with sand addition. Due to the fuel used, bed sintering occurred in all boilers. Obviously, sintering was also influenced by some technical problems. Bed material samples have been analyzed with XRF and SEM-EDS techniques. According to these analyses, the main reason for sintering in boiler A is the cumulation of reactive potassium in bed material. In boiler B, the main reason is the fuel change from a mixture of softwood bark and industrial wood waste to pure industrial wood waste. The extra load of reactive sodium exceeded the critical concentration of alkali compounds in bed material. Also in boiler C, the fuel change from a mixture of softwood bark and sludge to pure softwood bark seems to be one of the reasons for bed sintering. After the fuel change the bed saturated with reactive potassium and the bed sintered. (orig.)

  1. Phytochemical, Antimicrobial, and Toxicological Evaluation of Traditional Herbs Used to Treat Sore Throat

    Directory of Open Access Journals (Sweden)

    Arifa Mehreen

    2016-01-01

    Full Text Available The in vitro antibacterial activities of 29 traditional medicinal plants used in respiratory ailments were assessed on multidrug resistant Gram-positive and Gram-negative bacteria isolated from the sore throat patients and two reference strains. The methanolic, n-hexane, and aqueous extracts were screened by the agar well diffusion assay. Bioactive fractions of effective extracts were identified on TLC coupled with bioautography, while their toxicity was determined using haemolytic assay against human erythrocytes. Qualitative and quantitative phytochemical analysis of effective extracts was also performed. Methanolic extract of 18 plants showed antimicrobial activity against test strains. Adhatoda vasica (ZI = 17–21 mm, MIC: 7.12–62.5 μg/mL, Althaea officinalis (ZI = 16–20 mm, MIC: 15.62–31.25 μg/mL, Cordia latifolia (ZI = 16–20 mm, MIC: 12.62–62.5 μg/mL, Origanum vulgare (ZI = 20–22 mm, MIC: 3–15.62 μg/mL, Thymus vulgaris (ZI = 21–25 mm, MIC: 7.81–31.25 μg/mL, and Ziziphus jujuba (ZI = 14–20 mm, MIC: 7.81–31.25 μg/mL showed significant antibacterial activity. Alkaloid fractions of Adhatoda vasica, Cordia latifolia, and Origanum vulgare and flavonoid fraction of the Althaea officinalis, Origanum vulgare, Thymus Vulgaris, and Ziziphus jujuba exhibited antimicrobial activity. Effective plant extracts show 0.93–0.7% erythrocyte haemolysis. The results obtained from this study provide a scientific rationale for the traditional use of these herbs and laid the basis for future studies to explore novel antimicrobial compounds.

  2. Effect of hydrotherapy on the signs and symptoms of delayed onset muscle soreness.

    Science.gov (United States)

    Vaile, Joanna; Halson, Shona; Gill, Nicholas; Dawson, Brian

    2008-03-01

    This study independently examined the effects of three hydrotherapy interventions on the physiological and functional symptoms of delayed onset muscle soreness (DOMS). Strength trained males (n = 38) completed two experimental trials separated by 8 months in a randomised crossover design; one trial involved passive recovery (PAS, control), the other a specific hydrotherapy protocol for 72 h post-exercise; either: (1) cold water immersion (CWI: n = 12), (2) hot water immersion (HWI: n = 11) or (3) contrast water therapy (CWT: n = 15). For each trial, subjects performed a DOMS-inducing leg press protocol followed by PAS or one of the hydrotherapy interventions for 14 min. Weighted squat jump, isometric squat, perceived pain, thigh girths and blood variables were measured prior to, immediately after, and at 24, 48 and 72 h post-exercise. Squat jump performance and isometric force recovery were significantly enhanced (P < 0.05) at 24, 48 and 72 h post-exercise following CWT and at 48 and 72 h post-exercise following CWI when compared to PAS. Isometric force recovery was also greater (P < 0.05) at 24, 48, and 72 h post-exercise following HWI when compared to PAS. Perceived pain improved (P < 0.01) following CWT at 24, 48 and 72 h post-exercise. Overall, CWI and CWT were found to be effective in reducing the physiological and functional deficits associated with DOMS, including improved recovery of isometric force and dynamic power and a reduction in localised oedema. While HWI was effective in the recovery of isometric force, it was ineffective for recovery of all other markers compared to PAS.

  3. Phytochemical, Antimicrobial, and Toxicological Evaluation of Traditional Herbs Used to Treat Sore Throat

    Science.gov (United States)

    Mehreen, Arifa; Waheed, Muzzamil; Liaqat, Iram; Arshad, Najma

    2016-01-01

    The in vitro antibacterial activities of 29 traditional medicinal plants used in respiratory ailments were assessed on multidrug resistant Gram-positive and Gram-negative bacteria isolated from the sore throat patients and two reference strains. The methanolic, n-hexane, and aqueous extracts were screened by the agar well diffusion assay. Bioactive fractions of effective extracts were identified on TLC coupled with bioautography, while their toxicity was determined using haemolytic assay against human erythrocytes. Qualitative and quantitative phytochemical analysis of effective extracts was also performed. Methanolic extract of 18 plants showed antimicrobial activity against test strains. Adhatoda vasica (ZI = 17–21 mm, MIC: 7.12–62.5 μg/mL), Althaea officinalis (ZI = 16–20 mm, MIC: 15.62–31.25 μg/mL), Cordia latifolia (ZI = 16–20 mm, MIC: 12.62–62.5 μg/mL), Origanum vulgare (ZI = 20–22 mm, MIC: 3–15.62 μg/mL), Thymus vulgaris (ZI = 21–25 mm, MIC: 7.81–31.25 μg/mL), and Ziziphus jujuba (ZI = 14–20 mm, MIC: 7.81–31.25 μg/mL) showed significant antibacterial activity. Alkaloid fractions of Adhatoda vasica, Cordia latifolia, and Origanum vulgare and flavonoid fraction of the Althaea officinalis, Origanum vulgare, Thymus Vulgaris, and Ziziphus jujuba exhibited antimicrobial activity. Effective plant extracts show 0.93–0.7% erythrocyte haemolysis. The results obtained from this study provide a scientific rationale for the traditional use of these herbs and laid the basis for future studies to explore novel antimicrobial compounds. PMID:27429983

  4. Process and technological wastes compaction through a fluidized bed incineration process

    International Nuclear Information System (INIS)

    Guiroy, J.J.

    1993-01-01

    The various fluidized bed systems (dense or circulating) are reviewed and the advantages of the circulation fluidized bed are highlighted (excellent combustion performance, clean combustion, large operating range, poly-functionality with regards to waste type, ...). Applications to contaminated graphite (with the problem of ash management) and to plant process wastes (ion exchangers, technological wastes, aqueous effluents); study of the neutralization and chlorine emission

  5. Real-Time Measurement of Volatile Chemicals Released by Bed Bugs during Mating Activities

    DEFF Research Database (Denmark)

    Kilpinen, Ole Østerlund; Liu, Dezhao; Adamsen, Anders Peter

    2012-01-01

    In recent years, bed bug (Hemiptera: Cimicidae) problems have increased dramatically in many parts of the world, leading to a renewed interest in their chemical ecology. Most studies of bed bug semiochemicals have been based on the collection of volatiles over a period of time followed by chemical...

  6. Advantages of forced non-steady operated trickle-bed reactors

    NARCIS (Netherlands)

    Boelhouwer, J.G.; Piepers, H.W.; Drinkenburg, A.A.H.

    2002-01-01

    Trickle-bed reactors are usually operated in the steady state trickle flow regime. Uneven liquid distribution and the formation of hot spots are the most serious problems experienced during trickle flow operation. In this paper, we advocate the use of non-steady state operation of trickle-bed

  7. Agglomeration mechanism in biomass fluidized bed combustion – Reaction between potassium carbonate and silica sand

    DEFF Research Database (Denmark)

    Anicic, Bozidar; Lin, Weigang; Dam-Johansen, Kim

    2018-01-01

    Agglomeration is one of the operational problems in fluidized bed combustion of biomass, which is caused by interaction between bed materials (e.g. silica sand) and the biomass ash with a high content of potassium species. However, the contribution of different potassium species to agglomeration ...

  8. Improvement for the design of packed moving bed adsorption column

    International Nuclear Information System (INIS)

    Xiao Wei

    2014-01-01

    The problems needed to pay attention to in the physical design of packed moving bed adsorption column were presented. The design of key parts such as the inlet and outlet of liquid phase and gas phase were improved. The expected effect was achieved by the improvement. (author)

  9. Purification performances of common reed beds based on the ...

    African Journals Online (AJOL)

    SARAH

    2013-11-30

    Nov 30, 2013 ... advantages, the reed bed is a solution to Beninese purification problems. Since technical service agent of ... Journal of Applied Biosciences 71:5682– 5691. ISSN 1997–5902 ..... 15N/14N ratios. Journal of Hydrology, vol. 199,.

  10. Effects of protein supplements on muscle damage, soreness and recovery of muscle function and physical performance: a systematic review.

    Science.gov (United States)

    Pasiakos, Stefan M; Lieberman, Harris R; McLellan, Tom M

    2014-05-01

    Protein supplements are frequently consumed by athletes and recreationally-active individuals, although the decision to purchase and consume protein supplements is often based on marketing claims rather than evidence-based research. To provide a systematic and comprehensive analysis of literature examining the hypothesis that protein supplements enhance recovery of muscle function and physical performance by attenuating muscle damage and soreness following a previous bout of exercise. English language articles were searched with PubMed and Google Scholar using protein and supplements together with performance, exercise, competition and muscle, alone or in combination as keywords. Inclusion criteria required studies to recruit healthy adults less than 50 years of age and to evaluate the effects of protein supplements alone or in combination with carbohydrate on performance metrics including time-to-exhaustion, time-trial or isometric or isokinetic muscle strength and markers of muscle damage and soreness. Twenty-seven articles were identified of which 18 dealt exclusively with ingestion of protein supplements to reduce muscle damage and soreness and improve recovery of muscle function following exercise, whereas the remaining 9 articles assessed muscle damage as well as performance metrics during single or repeat bouts of exercise. Papers were evaluated based on experimental design and examined for confounders that explain discrepancies between studies such as dietary control, training state of participants, sample size, direct or surrogate measures of muscle damage, and sensitivity of the performance metric. High quality and consistent data demonstrated there is no apparent relationship between recovery of muscle function and ratings of muscle soreness and surrogate markers of muscle damage when protein supplements are consumed prior to, during or after a bout of endurance or resistance exercise. There also appears to be insufficient experimental data

  11. Utility of Recycled Bedding for Laboratory Rodents

    OpenAIRE

    Miyamoto, Toru; Li, Zhixia; Kibushi, Tomomi; Okano, Shinya; Yamasaki, Nakamichi; Kasai, Noriyuki

    2009-01-01

    Animal facilities generate a large amount of used bedding containing excrement as medical waste. We developed a recycling system for used bedding that involves soft hydrothermal processing. In this study, we examined the effects of bedding type on growth, hematologic and serum biochemical values, and organ weights of female and male mice reared on either recycled or fresh bedding from 3 to 33 wk of age. Neither growth nor physiology differed between mice housed on recycled bedding compared wi...

  12. Application and Discussion of Dual Fluidized Bed Reactor in Biomass Energy Utilization

    Science.gov (United States)

    Guan, Haibin; Fan, Xiaoxu; Zhao, Baofeng; Yang, Liguo; Sun, Rongfeng

    2018-01-01

    As an important clean and renewable energy, biomass has a broad market prospect. The dual fluidized bed is widely used in biomass gasification technology, and has become an important way of biomass high-value utilization. This paper describes the basic principle of dual fluidized bed gasification, from the gas composition, tar content and thermal efficiency of the system point of view, analyzes and summarizes several typical dual fluidized bed biomass gasification technologies, points out the existence of gas mixing, the external heat source, catalyst development problems on gas. Finally, it is clear that the gasification of biomass in dual fluidized bed is of great industrial application and development prospect.

  13. Fluid bed porosity equation for an inverse fluidized bed bioreactor with particles growing biofilm

    International Nuclear Information System (INIS)

    Campos-Diaz, K. E.; Limas-Ballesteros, R.

    2009-01-01

    Fluid Bed Bioreactor performance is strongly affected by bed void fraction or bed porosity fluctuations. Particle size enlargement due to biofilm growth is an important factor that is involved in these variations and until now there are no mathematical equations that consider biofilm growth. In this work a mathematical equation is proposed to calculate bed void fraction in an inverse fluid bed bioreactor. (Author)

  14. Use of inferior gluteal artery and posterior thigh perforators in management of ischial pressure sores with limited donor sites for flap coverage.

    Science.gov (United States)

    Unal, Cigdem; Ozdemir, Jale; Yirmibesoglu, Oktay; Yucel, Ergin; Agir, Hakan

    2012-07-01

    Reconstructive surgery for ischial pressure sore defects presents a challenge because of high rates of recurrence. The aim of this study was to describe the use of inferior gluteal artery (IGA) and posterior thigh perforators in management of ischial pressure sores with limited donor sites. Between September 2005 and 2009, 11 patients (9 male, 2 female) with ischial sores were operated by using IGA and posterior thigh perforator flaps. The data of patients included age, sex, cause of paraplegia, flap size, perforator of flap, previous surgeries, recurrences, complications, and postoperative follow-up. Nine IGA and 5 posterior thigh perforator flaps were used. Six patients presented with recurrent lesions, 5 patients were operated for sacral and contralateral ischial pressure sores previously. In 2 patients, IGA and posterior thigh perforator flaps were used in combination. Patients were followed for an average of 34.3 months. In 2 recurrent cases, readvancement of IGA perforator flap and gluteus maximus myocutaneous flap were treatment of choice. Treatment of patients with recurrent lesions or multiple pressure sores is challenging because of limited available flap donor sites. In this study, posterior thigh perforator flaps were preferred in patients in whom the previous donor site was the gluteal region. IGA perforator flaps were the treatment of choice in patients for whom posterior thigh region was previously used. Alternately, preserved perforators of previous conventional myocutaneous flaps enabled us to use these perforators in recurrences.

  15. [Cohort study of the incidence of heel pressure sores in patients with leg casts at the Rizzoli Orthopedic Hospital and of the associated risk factors].

    Science.gov (United States)

    Forni, Cristiana; Zoli, Marina; Loro, Loretta; Tremosini, Morena; Mini, Sandra; Pirini, Valter; Turrini, Roberta; Durante, Stefano; Nicolini, Annamaria; Riccioni, Francesca; Girolami, Roberto

    2009-01-01

    Pressure sores, especially at the heel, are a side effect of the cast. To assess the incidence of late skin complications (heel pressure sores) of a cast and determine risk factors. All consecutive patients treated with a leg cast over a 16 months observation time were recruited. Risk factors were identified by the nurse that placed the cast and skin lesions classified with the NPUAP scale when the cast was removed. In the 216 enrolled patients 17.6% (38) developed a pressure sore: 16/124 in orthopedic wards; 22/92 in oncology wards. The multivariate analysis identified the following risk factors: administration of cytotoxic drugs (p = 0.033; OR = 2.61; having a cancer did not increase the risk); skin redness before cast application (p = 0.001; OR = 4.44) and having reported symptoms after the application (p = 0.000; OR = 7.86). Pressure sores were mainly stage 1 and only 6/216 (2.4%) > or = stage II. The type of plaster cast, the material, the number of days it was worn and having had a surgery are not significant risk factors. Pressure sores related to leg plaster casts are a frequent complication in at risk sub-groups. The acknowledgement and identification of specific risk factors may allow to identify and evaluate preventive interventions to improve the care of these patients.

  16. Comparing the effect of ketamine and benzydamine gargling with placebo on post-operative sore throat: A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Seyed Hamid Reza Faiz

    2014-01-01

    Full Text Available Background: Air way intubation for general anesthesia usually leads to sore throat after surgery. Ketamine plays an important role to block a number of receptors related to pain. Benzydamine hydrochloride is a non-steroidal anti-inflammatory drug that has been used to improve oropharyngeal disorders. In this study, it was intended to compare the effect of gargling different solutions before the surgery on post-operative sore throat (POST in patients who underwent general anesthesia for hysterectomy. Materials and Methods: A total of 60 patients who underwent the elective hysterectomy were entered to the randomized controlled trial regarding to the eligibility criteria. Patients were simply randomly allocated to three groups and received one code. Every code was representative for a specific drug: 20 cc normal saline (control group or 1.5 mg benzydamine in 20 cc solution or 20 mg ketamine in 20 cc solutions. All the research teams were blinded to the received solutions. POST was evaluated with numerical rating scale. The data were entered to SPSS software and analysis of variance (ANOVA and Kruskal-Wallis one-way analysis of variance test, were performed. Results: The mean ages of ketamine, benzydamine, and normal saline recipients were not significantly different. The trend of the severity of sore throat during the first 24 h after the operation in ketamine recipients was significantly lower than the other two groups (P < 0.001. Conclusion: The pain scale after surgery was reduced by using both ketamine and benzydamine, but the ketamine effect was more noticeable.

  17. Electric versus hydraulic hospital beds: differences in use during basic nursing tasks.

    Science.gov (United States)

    Capodaglio, Edda Maria

    2013-01-01

    Biomechanical, postural and ergonomic aspects during real patient-assisting tasks performed by nurses using an electric versus a hydraulic hospital bed were observed. While there were no differences in the flexed postures the nurses adopted, longer performance times were recorded when electric beds were used. Subjective effort, force exertion and lumbar shear forces exceeding safety limits proved electric beds were superior. Patients' dependency level seemed to influence the type of nurses' intervention (duration and force actions), irrespective of the bed used. The nurses greatly appreciated the electric bed. Its use seemed to reduce the level of effort perceived during care giving and the postural load during critical subtasks. Ergonomics and organizational problems related to adopting electric beds in hospital wards should be addressed further to make their use more efficient.

  18. Particle Bed Reactor scaling relationships

    International Nuclear Information System (INIS)

    Slovik, G.; Araj, K.; Horn, F.L.; Ludewig, H.; Benenati, R.

    1987-01-01

    Scaling relationships for Particle Bed Reactors (PBRs) are discussed. The particular applications are short duration systems, i.e., for propulsion or burst power. Particle Bed Reactors can use a wide selection of different moderators and reflectors and be designed for such a wide range of power and bed power densities. Additional design considerations include the effect of varying the number of fuel elements, outlet Mach number in hot gas channel, etc. All of these variables and options result in a wide range of reactor weights and performance. Extremely light weight reactors (approximately 1 kg/MW) are possible with the appropriate choice of moderator/reflector and power density. Such systems are very attractive for propulsion systems where parasitic weight has to be minimized

  19. Fluidized-bed nuclear reactor

    International Nuclear Information System (INIS)

    Grimmett, E.S.; Kunze, J.F.

    1975-01-01

    A reactor vessel containing a fluidized-bed region of particulate material including both a neutron-moderating and a fertile substance is described. A gas flow including fissile material passes through the vessel at a sufficient rate to fluidize the particulate material and at a sufficient density to support a thermal fission reaction within the fluidized-bed region. The high-temperature portion of a heat transfer system is located within the fluidized-bed region of the reactor vessel in direct contact with the fluidized particles. Heat released by fission is thereby transferred at an enhanced rate to a coolant circulating within the heat transfer system. Fission products are continuously removed from the gas flow and supplemental fissile material added during the reactor operation. (U.S.)

  20. Epidemiologia e tratamento das úlceras de pressão: experiência de 77 casos Epidemiological profile and treatment of pressure sores: experience with 77 cases

    Directory of Open Access Journals (Sweden)

    Márcio Paulino Costa

    2005-01-01

    crompression due to sitting, lying or wearing brace in a heathy person results in discomfort and pain due to local isquemia. The normal protective pahtways are interrupted, however, in paraplegics, quadriplegic or the signals are ignored in severely de hibilitade, eldery or chronic ill patients. The pressure sore develops in these patients. Few papers have been done in Brazil abour pressure sores, despite economic problem envolved with. The purpose of this paper is to evaluate the epidemiology, treatment and complications of pressure sores in the Hospital das Clínicas (University of São Paulo from February 1997 to March 1999 in the Orthopedics Institute. A prospective study has been done. Data were evaluated as to the sex, age, sites, classification, type of treatment employed, length of stay and complications. The treatment was evaluated by the success rate and recurrence rate . The average follow-up period was 1 year and a half, ranging from 6 month to 2 years. 77 pressure sores in 45 patients were apraised. 36 men and 9 women, age range 17-64, mean 34,78 years. Of the patients, 100% had severe spinal cord injuries, and most of them victims of gun shot (60%. 93,3% of the wound were chronic (present longer than 3 months. 77,92% were treated by surgical procedures, and most of them with myocutaneous flaps (45%. The success rate changed with the site of the lesion: 80% trochanter, 84% sacrum and 66,6% ischium. The recurrence rate was 25%. The complication rate also changed with the site of the lesion: 84% trocanter, 64% sacrum and 50% isquium.

  1. Thermal-hydraulic considerations for particle bed reactors

    Science.gov (United States)

    Benenati, R.; Araj, K. J.; Horn, F.

    In the design of particle bed reactor (PBR) cores, consideration must be given to the gas coolant channels and their configuration. Neutronics analysis provides the relative volume fractions of the component materials, but these must be arranged in such a manner as to allow proper cooling of all components by the gas flow at relatively low pressure drops. The thermal hydraulic aspects of this problem are addressed. A description of the computer model used in the analysis of the steady state condition is also included. Blowdown tests on hot particle bed fuel elements were carried out and are described.

  2. Myocellular enzyme leakage, polymorphonuclear neutrophil activation and delayed onset muscle soreness induced by isokinetic eccentric exercise.

    Science.gov (United States)

    Croisier, J L; Camus, G; Deby-Dupont, G; Bertrand, F; Lhermerout, C; Crielaard, J M; Juchmès-Ferir, A; Deby, C; Albert, A; Lamy, M

    1996-01-01

    To address the question of whether delayed onset muscular soreness (DOMS) following intense eccentric muscle contraction could be due to increased production of the arachidonic acid derived product prostaglandin E2 (PGE2). 10 healthy male subjects were submitted to eccentric and concentric isokinetic exercises on a Kin Trex device at 60 degrees/s angular velocity. Exercise consisted of 8 stages of 5 maximal contractions of the knee extensor and flexor muscle groups of both legs separated by 1 min rest phases. There was an interval of at least 30 days between eccentric and concentric testing, and the order of the two exercise sessions was randomly assigned. The subjective presence and intensity of DOMS was evaluated using a visual analogue scale, immediately, following 24 h and 48 h after each test. Five blood samples were drawn from an antecubital vein: at rest before exercise, immediately after, after 30 min recovery, 24 h and 48 h after the tests. The magnitude of the acute inflammatory response to exercise was assessed by measuring plasma levels of polymorphonuclear elastase ([EL]), myeloperoxidase ([MPO]) and PGE2 ([PGE2]). Using two way analysis of variance, it appeared that only eccentric exercise significantly increased [EL] and DOMS, especially of the hamstring muscles. Furthermore, a significant decrease in eccentric peak torque of this muscle group only was observed on day 2 after eccentric work (- 21%; P < 0.002). Serum activity of creatine kinase and serum concentration of myoglobin increased significantly 24 and 48 h after both exercise tests. However, these variables reached significantly higher values following eccentric contractions 48 h after exercise. Mean [PGE2] in the two exercise modes remained unchanged over time and were practically equal at each time point. On the basis of these findings, we conclude that the magnitude of polymorphonuclear (PMN) activation, muscle damage, and DOMS are greater after eccentric than after concentric muscle

  3. Prediction of bed level variations in nonuniform sediment bed channel

    Indian Academy of Sciences (India)

    B R Andharia

    2018-04-12

    Apr 12, 2018 ... A fully-coupled 1D mobile-bed model (CAR-. ICHAR) was introduced ...... for sediment trap, water level sensor, tail gate operated by lever arm at .... materials were brought back to upstream to feed the same through sediment ...

  4. Impact of thermal loading and other water quality parameters on the epizootiology of red-sore disease in centrarchids. Progress report, December 1, 1977--November 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Esch, G.W.; Hazen, T.C.

    1978-07-01

    The implications from these studies are varied, sometimes clear and sometimes less so, for many of the results have raised new and even more critical questions. Thus, our data clearly show that Aeromonas hydrophila is the etiological agent for red-sore disease. Furthermore, they suggest that the effects of temperature are twofold, first in increasing the density of the pathogen in the water column and then in affecting the physiology of the host organism to such an extent as to increase the probability of acquiring the pathogen. On the other hand, organic loading, suggested by other investigators as being important in red-sore disease, was not identified as being significant in the present study. However, if organic loading, or any of its consequences, can be shown to induce stress, then it may be as important in other systems as temperature is in Par Pond. Thus it is quite conceivable that it (organic loading), or some other water quality parameter, may create conditions conducive to increasing densities of A. hydrophila while simultaneously producing water quality characteristics which would lead to stress in fish, and then to increasing the probability of fish acquiring red-sore disease. An enigmatic observation (see Hazen, 1978, for details) is that A. hydrophila has been recovered from a variety of habitats throughout the U.S., yet red-sore disease is known to occur only in the southeast. This peculiar distribution pattern raises several important questions regarding the epizootiology of red-sore, not the least of which is the possibility of there existing differentially virulent strains of A. hydrophila and/or more or less susceptible populations of potential hosts in various parts of the country. Other significant questions are related to the variability in amplitude of red-sore disease from one year to the next among bass in Par Pond, the mode of entry of the pathogen into largemouth bass, and the basic, cellular mechanisms of stress in largemouth bass.

  5. [Topic efficacy of ialuronic acid associated with argentic sulphadiazine (Connettivina Plus) in the treatment of pressure sores: a prospective observational cohort study].

    Science.gov (United States)

    Paghetti, Angela; Bellingeri, Andrea; Pomponio, Giovanni; Sansoni, Julita; Paladino, Dario

    2009-01-01

    The aim of this observational study was to evaluate the efficacy, tolerability and methods of application of ialuronic acid associated with argentic sulphadiazine (Connettivina Plus) in routine clinical activity, on a target of "complex" patients with pressure sores, for the most realistic assessment possible. The study comprised 127 patients hospitalized between January 2006 and December 2007, who received ialuronic acid associated with argentic sulphadiazine in addition to the standard treatment. Inclusion criteria were th presence of at least one stage 2 or 3 pressure sore (NPUAP '89 classification), pressure sore that the researcher had already decided to treat using ialuronic acid associated with argentic sulphadiazine , according to hospital protocol, area of the lesion less than 25cm2, patient age 18 years or more, informed patient consensus. Patients with these characteristics were , however, excluded if they did not provide written consent or if they had one of the following: presence of pressure sores with escara, concomitant neoplastic disease, concomitant insulin-dependent diabetes or other pathologies that interfere with skin regeneration, allergic diasthesis (acclaimed or presumed) to ialuronic acid - argentic sulphadiazine, inability / refusal to undergo all the subsequent controls required by the study. Improvement or complete healing of the pressure sores was observed in 67% of patients at early follow-up (10 days), increasing to 76% and 87% at 20 and 35 day controls respectively. The Push tool further improved in patients who carried on treatment. Use of ialuronic acid associated with argentic sulphadiazine was effective for treating grade 2-3 pressure sores in patients with chronic lesions and its efficacy was confirmed in association with both advanced and traditional types of medication.

  6. Impact of thermal loading and other water quality parameters on the epizootiology of red-sore disease in centrarchids. Progress report, December 1, 1977--November 30, 1978

    International Nuclear Information System (INIS)

    Esch, G.W.; Hazen, T.C.

    1978-07-01

    The implications from these studies are varied, sometimes clear and sometimes less so, for many of the results have raised new and even more critical questions. Thus, our data clearly show that Aeromonas hydrophila is the etiological agent for red-sore disease. Furthermore, they suggest that the effects of temperature are twofold, first in increasing the density of the pathogen in the water column and then in affecting the physiology of the host organism to such an extent as to increase the probability of acquiring the pathogen. On the other hand, organic loading, suggested by other investigators as being important in red-sore disease, was not identified as being significant in the present study. However, if organic loading, or any of its consequences, can be shown to induce stress, then it may be as important in other systems as temperature is in Par Pond. Thus it is quite conceivable that it (organic loading), or some other water quality parameter, may create conditions conducive to increasing densities of A. hydrophila while simultaneously producing water quality characteristics which would lead to stress in fish, and then to increasing the probability of fish acquiring red-sore disease. An enigmatic observation (see Hazen, 1978, for details) is that A. hydrophila has been recovered from a variety of habitats throughout the U.S., yet red-sore disease is known to occur only in the southeast. This peculiar distribution pattern raises several important questions regarding the epizootiology of red-sore, not the least of which is the possibility of there existing differentially virulent strains of A. hydrophila and/or more or less susceptible populations of potential hosts in various parts of the country. Other significant questions are related to the variability in amplitude of red-sore disease from one year to the next among bass in Par Pond, the mode of entry of the pathogen into largemouth bass, and the basic, cellular mechanisms of stress in largemouth bass

  7. A new method to quantify fluidized bed agglomeration in the combustion of biomass fuels

    Energy Technology Data Exchange (ETDEWEB)

    Oehman, M. [Umeaa Univ. (Sweden). Dept. of Chemistry

    1997-12-31

    The present licentiate thesis is a summary and discussion of four papers, dealing with the development, evaluation and use of a new method to quantify bed agglomeration tendencies for biomass fuels. An increased utilization of biomass related fuels has many environmental benefits, but also requires careful studies of potential new problems associated with these fuels such as bed agglomeration/defluidization during combustion and gasification in fluidized beds. From a thorough literature survey, no suitable methods to determine bed agglomeration tendencies of different fuels, fuel combinations or fuels with additives appeared to be available. It therefore seemed of considerable interest to develop a new method for the quantification of fluidized bed agglomeration tendencies for different fuels. A bench scale fluidized bed reactor (5 kW), specially designed to obtain a homogeneous isothermal bed temperature, is used. The method is based on controlled increase of the bed temperature by applying external heat to the primary air and to the bed section walls. The initial agglomeration temperature is determined by on- or off-line principal component analysis of the variations in measured bed temperatures and differential pressures. Samples of ash and bed material for evaluation of agglomeration mechanisms may also be collected throughout the operation. To determine potential effects of all the process related variables on the determined fuel specific bed agglomeration temperature, an extensive sensitivity analysis was performed according to a statistical experimental design. The results showed that the process variables had only relatively small effects on the agglomeration temperature, which could be determined to 899 deg C with a reproducibility of {+-} 5 deg C (STD). The inaccuracy was determined to be {+-} 30 deg C (STD). The method was also used to study the mechanism of both bed agglomeration using two biomass fuels and prevention of bed agglomeration by co

  8. The accordion gracilis muscle flap: a new design for coverage of recurrent and complicated ischeal pressure sores.

    Science.gov (United States)

    El-Sabbagh, Ahmed H

    2011-10-01

    Management of patients with large or recurrent pressure ulcerations can be complicated by the lack of available local flap, whether already used or because adjacent lesions make such flap insufficient for complete coverage. In this article, the gracilis muscle was modified to cover large defects without help from its cutaneous territory. Twelve ischeal pressure sores were treated between August 2007 and 2009 with the modified gracilis muscle flap in a single-staged procedure. Five ulcers were recurrent and seven patients have associated pressure ulcers. All reconstructions were successful. Mean patient age was 35 years and nearly all patients had multiple significant comorbidities, including associated ulcers, diabetes and urethrocutaneous fistula. All flaps and donor sites healed uneventfully. There was one complication presented as cellulites at the donor site. Follow-up in some cases extend up to 1·5 years. No recurrence was observed. The accordion gracilis muscle flap is a handy, safe and fast flap for reconstruction of recurrent, difficult ischeal pressure sores. © 2011 The Author. © 2011 Blackwell Publishing Ltd and Medicalhelplines.com Inc.

  9. Pressure sores significantly increase the risk of developing a Fournier's gangrene in patients with spinal cord injury.

    Science.gov (United States)

    Backhaus, M; Citak, M; Tilkorn, D-J; Meindl, R; Schildhauer, T A; Fehmer, T

    2011-11-01

    Retrospective chart review. The aim of our study was to evaluate the mortality rate and further specific risk factors for Fournier's gangrene in patients with spinal cord injury (SCI). Division of Spinal Cord Injury, BG-University Hospital Bergmannsheil Bochum, Ruhr-University Bochum, Germany. All patients with a SCI and a Fournier's gangrene treated in our hospital were enrolled in this study. Following parameters were taken form patients medical records: age, type of SCI, cause of Fournier's gangrene, number of surgical debridements, length of hospital and intensive care unit stay, co morbidity factors and mortality rate. In addition, laboratory parameter including the laboratory risk indicator for necrotizing fasciitis (LRINEC) score and microbiological findings were analyzed. Clinical diagnosis was made via histological examination. A total of 16 male patients (15 paraplegic and one tetraplegic) were included in the study. In 81% of all cases, the origin of Fournier's gangrene was a pressure sore. The median LRINEC score on admission was 6.5. In the vast majority of cases, a polybacterial infection was found. No patient died during the hospital stay. The mean number of surgical debridements before soft tissue closure was 1.9 and after a mean time interval of 39.1 days wound closure was performed in all patients. Pressure sores significantly increase the risk of developing Fournier's gangrene in patients with SCI. We reported the results of our patients to increase awareness among physicians and training staff working with patients with a SCI in order to expedite the diagnosis.

  10. Whole-body cryotherapy (extreme cold air exposure) for preventing and treating muscle soreness after exercise in adults.

    Science.gov (United States)

    Costello, Joseph T; Baker, Philip R A; Minett, Geoffrey M; Bieuzen, Francois; Stewart, Ian B; Bleakley, Chris

    2015-09-18

    Recovery strategies are often used with the intention of preventing or minimising muscle soreness after exercise. Whole-body cryotherapy, which involves a single or repeated exposure(s) to extremely cold dry air (below -100 °C) in a specialised chamber or cabin for two to four minutes per exposure, is currently being advocated as an effective intervention to reduce muscle soreness after exercise. To assess the effects (benefits and harms) of whole-body cryotherapy (extreme cold air exposure) for preventing and treating muscle soreness after exercise in adults. We searched the Cochrane Bone, Joint and Muscle Trauma Group Specialised Register, the Cochrane Central Register of Controlled Trials, MEDLINE, EMBASE, CINAHL, the British Nursing Index and the Physiotherapy Evidence Database. We also searched the reference lists of articles, trial registers and conference proceedings, handsearched journals and contacted experts.The searches were run in August 2015. We aimed to include randomised and quasi-randomised trials that compared the use of whole-body cryotherapy (WBC) versus a passive or control intervention (rest, no treatment or placebo treatment) or active interventions including cold or contrast water immersion, active recovery and infrared therapy for preventing or treating muscle soreness after exercise in adults. We also aimed to include randomised trials that compared different durations or dosages of WBC. Our prespecified primary outcomes were muscle soreness, subjective recovery (e.g. tiredness, well-being) and adverse effects. Two review authors independently screened search results, selected studies, assessed risk of bias and extracted and cross-checked data. Where appropriate, we pooled results of comparable trials. The random-effects model was used for pooling where there was substantial heterogeneity. We assessed the quality of the evidence using GRADE. Four laboratory-based randomised controlled trials were included. These reported results for 64

  11. Histopathology of red-sore disease (aeromonas hydrophila) in naturally and experimentally infected largemouth bass micropterus salmoides(lacepede)

    Energy Technology Data Exchange (ETDEWEB)

    Huizinga, H W [Illinois State Univ., Normal; Esch, G W; Hazen, T C

    1979-01-01

    The histopathology of red-sore disease, caused by the gram-negative bacterium, Aeromonas hydrophila, is described for largemouth bass, Micropterus salmoides. Externally, lesions range from those affecting a few scales (pin-point), to those associated with extensive chronic ulcerations; there is focal hemorrhage, oedema and dermal necrosis which exposes underlying muscles producing infiltration of mononuclear and granulocytic inflammatory cells. Internally, the liver and kidneys are foci for toxic products produced by A. hydrophila with, in the most severe cases, complete destruction of the structural integrity of both organs. Pathological changes were not serious in either the spleen or heart, even in cases with massive damage in the liver and kidney. Internal and external lesions were similar in both natural and experimentally induced infections. The pathobiology of red-sore disease in bass was postulated to be linked to elevated water temperature stimulating increased metabolism, decreased body condition and stress, leading to the increased production of corticosteroids and the concommitant rise in susceptibility to infection.

  12. Apparatus and process for controlling fluidized beds

    Science.gov (United States)

    Rehmat, Amirali G.; Patel, Jitendra G.

    1985-10-01

    An apparatus and process for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance.

  13. Physiology Of Prolonged Bed Rest

    Science.gov (United States)

    Greenleaf, John E.

    1991-01-01

    Report describes physiological effects of prolonged bed rest. Rest for periods of 24 hours or longer deconditions body to some extent; healing proceeds simultaneously with deconditioning. Report provides details on shifts in fluid electrolytes and loss of lean body mass, which comprises everything in body besides fat - that is, water, muscle, and bone. Based on published research.

  14. How to Find Bed Bugs

    Science.gov (United States)

    Find and correctly identify an infestation early before it becomes widespread. Look for rusty or reddish stains and pinpoint dark spots on bed sheets or mattresses, and search for bugs near the piping, seams and tags of the mattress and box spring.

  15. Borehole-inclusion stressmeter measurements in bedded salt

    International Nuclear Information System (INIS)

    Cook, C.W.; Ames, E.S.

    1980-07-01

    Sandia purchased borehole-inclusion stressmeters from a commercial supplier to measure in situ stress changes in bedded salt. However, the supplied stressmeters were difficult to set in place and gave erratic results in bedded salt. These problems were overcome with a new extended platen design. Also a straingaged transducer was designed which can be read with a conventional data logger. Due to the nonlinear behavior of bedded salt under uniaxial loading, a new empirical calibration scheme was devised. In essence, the stressmeters are calibrated as force transducers and this calibration curve is then used to determine the relationship between uniaxial stress changes in bedded salt and the gage's output. The stressmeter and calibration procedures have been applied under mine conditions and produced viable results. Future work will involve finite element analysis to calculate the observed behavior of the stressmeters. The response of the stressmeters in bedded salt is neither that of a true stressmeter or of a true strainmeter. However, repeatable calibrations make the gages very useful

  16. A review of some parameters involved in fluidized bed bioreactors

    Energy Technology Data Exchange (ETDEWEB)

    Wright, P.C. [School of Chemical Engineering and Industrial Chemistry, The Univ. of New South Wales, Sydney (Australia); Raper, J.A. [School of Chemical Engineering and Industrial Chemistry, The Univ. of New South Wales, Sydney (Australia)

    1996-02-01

    Three-phase fluidized bed bioreactors have advantages over conventional chemical reaction systems. There is a lack of agreement over most major operational conditions, and a wide range of design variables are open to question. A large body of recent work in the field has been reviewed, with a degree of historical comparison and discussion. It has been found that aspects of fluidized bed biofilm reactors of vital importance include: choice of solid media, gas and liquid loadings, bacterial type and reactor mechanical design. A large proportion of the work in the field of three-phase fluidization is non-biologically specific, or not tested on a bacterially inoculated system. The majority of three-phase fluidized bed bioreactor work is in the field of water treatment. Although this work has highlighted the potential for use of bio-fluidized beds for this application, there are still specific problems hinderin the large scale industrial acceptance of three-phase fluidized bed bioreactors. (orig.)

  17. The Pebble Bed Modular Reactor: An obituary

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Steve, E-mail: stephen.thomas@gre.ac.u [Public Services International Research Unit (PSIRU), Business School, University of Greenwich, 30 Park Row, London SE10 9LS (United Kingdom)

    2011-05-15

    The High Temperature Gas-cooled Reactor (HTGR) has exerted a peculiar attraction over nuclear engineers. Despite many unsuccessful attempts over half a century to develop it as a commercial power reactor, there is still a strong belief amongst many nuclear advocates that a highly successful HTGR technology will emerge. The most recent attempt to commercialize an HTGR design, the Pebble Bed Modular Reactor (PBMR), was abandoned in 2010 after 12 years of effort and the expenditure of a large amount of South African public money. This article reviews this latest attempt to commercialize an HTGR design and attempts to identify which issues have led to its failure and what lessons can be learnt from this experience. It concludes that any further attempts to develop HTGRs using Pebble Bed technology should only be undertaken if there is a clear understanding of why earlier attempts have failed and a high level of confidence that earlier problems have been overcome. It argues that the PBMR project has exposed serious weaknesses in accountability mechanisms for the expenditure of South African public money. - Research highlights: {yields} In this study we examine the reasons behind the failure of the South African PBMR programme. {yields} The study reviews the technical issues that have arisen and lessons for future reactor developments. {yields} The study also identifies weaknesses in the accountability mechanisms for public spending.

  18. A Numerical Model for Trickle Bed Reactors

    Science.gov (United States)

    Propp, Richard M.; Colella, Phillip; Crutchfield, William Y.; Day, Marcus S.

    2000-12-01

    Trickle bed reactors are governed by equations of flow in porous media such as Darcy's law and the conservation of mass. Our numerical method for solving these equations is based on a total-velocity splitting, sequential formulation which leads to an implicit pressure equation and a semi-implicit mass conservation equation. We use high-resolution finite-difference methods to discretize these equations. Our solution scheme extends previous work in modeling porous media flows in two ways. First, we incorporate physical effects due to capillary pressure, a nonlinear inlet boundary condition, spatial porosity variations, and inertial effects on phase mobilities. In particular, capillary forces introduce a parabolic component into the recast evolution equation, and the inertial effects give rise to hyperbolic nonconvexity. Second, we introduce a modification of the slope-limiting algorithm to prevent our numerical method from producing spurious shocks. We present a numerical algorithm for accommodating these difficulties, show the algorithm is second-order accurate, and demonstrate its performance on a number of simplified problems relevant to trickle bed reactor modeling.

  19. Fluidized bed combustion: mixing and pollutant limitation

    Energy Technology Data Exchange (ETDEWEB)

    Leckner, B. [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Energy Conversion

    1997-10-01

    Fluidized bed combustion (FBC) has been applied commercially during a few decades, and sufficient knowledge is gained to design boilers with sizes of up to several hundreds of megawatt thermal power (MW{sub th}). The knowledge of what goes on inside a large combustion chamber is still limited, however, and this impedes further optimization and efficient solution of problems that might occur. Despite this lack of knowledge the present survey deals with combustion chamber processes and discusses mixing and distribution of fuel and air in the combustion chamber and its importance for sulphur capture and reduction of emissions of nitrogen oxides. It is desirable to present the material in a general way and to cover the entire field of FBC. However, the scarce openly published information deals mostly with coal combustion in atmospheric circulating fluidized bed (CFB) combustors, and therefore this application will receive most attention, but reference is also made to pressurized combustion and to other fuels than coal. In this context the important work made in the LIEKKI project on the analysis of different fuels and on the influence of pressure should be especially pointed out. (orig.)

  20. The NASA Bed Rest Project

    Science.gov (United States)

    Rhodes, Bradley; Meck, Janice

    2005-01-01

    NASA s National Vision for Space Exploration includes human travel beyond low earth orbit and the ultimate safe return of the crews. Crucial to fulfilling the vision is the successful and timely development of countermeasures for the adverse physiological effects on human systems caused by long term exposure to the microgravity environment. Limited access to in-flight resources for the foreseeable future increases NASA s reliance on ground-based analogs to simulate these effects of microgravity. The primary analog for human based research will be head-down bed rest. By this approach NASA will be able to evaluate countermeasures in large sample sizes, perform preliminary evaluations of proposed in-flight protocols and assess the utility of individual or combined strategies before flight resources are requested. In response to this critical need, NASA has created the Bed Rest Project at the Johnson Space Center. The Project establishes the infrastructure and processes to provide a long term capability for standardized domestic bed rest studies and countermeasure development. The Bed Rest Project design takes a comprehensive, interdisciplinary, integrated approach that reduces the resource overhead of one investigator for one campaign. In addition to integrating studies operationally relevant for exploration, the Project addresses other new Vision objectives, namely: 1) interagency cooperation with the NIH allows for Clinical Research Center (CRC) facility sharing to the benefit of both agencies, 2) collaboration with our International Partners expands countermeasure development opportunities for foreign and domestic investigators as well as promotes consistency in approach and results, 3) to the greatest degree possible, the Project also advances research by clinicians and academia alike to encourage return to earth benefits. This paper will describe the Project s top level goals, organization and relationship to other Exploration Vision Projects, implementation

  1. Adult Bed-Wetting: A Concern?

    Science.gov (United States)

    Adult bed-wetting: A concern? My 24-year-old husband has started to wet the bed at ... of Privacy Practices Notice of Nondiscrimination Manage Cookies Advertising Mayo Clinic is a not-for-profit organization ...

  2. Find a Bed Bug Pesticide Product

    Science.gov (United States)

    Introduces the Bed Bug Product Search Tool, to help consumers find EPA-registered pesticides for bed bug infestation control. Inclusion in this database is not an endorsement. Always follow label directions carefully.

  3. EPA-Registered Bed Bug Products

    Science.gov (United States)

    ... rest or hide in hampers, bed frames, even furniture); Failing to treat adjacent areas where bed bugs ... to work (some pesticides, such as desiccators or growth regulators, may be very effective but take some ...

  4. Bed Bug Guidance for School Nurses

    Science.gov (United States)

    School nurses are often called upon to provide vital information to students, parents, teachers, and administrators. These tips on identifying, managing and preventing bed bugs will help you to effectively respond if bed bugs appear in your school.

  5. Bacillus cereus in free-stall bedding.

    Science.gov (United States)

    Magnusson, M; Svensson, B; Kolstrup, C; Christiansson, A

    2007-12-01

    To increase the understanding of how different factors affect the bacterial growth in deep sawdust beds for dairy cattle, the microbiological status of Bacillus cereus and coliforms in deep sawdust-bedded free stalls was investigated over two 14-d periods on one farm. High counts of B. cereus and coliforms were found in the entire beds. On average, 4.1 log(10) B. cereus spores, 5.5 log(10) B. cereus, and 6.7 log(10) coliforms per gram of bedding could be found in the upper layers of the sawdust likely to be in contact with the cows' udders. The highest counts of B. cereus spores, B. cereus, and coliforms were found in the bedding before fresh bedding was added, and the lowest immediately afterwards. Different factors of importance for the growth of B. cereus in the bedding material were explored in laboratory tests. These were found to be the type of bedding, pH, and the type and availability of nutrients. Alternative bedding material such as peat and mixtures of peat and sawdust inhibited the bacterial growth of B. cereus. The extent of growth of B. cereus in the sawdust was increased in a dose-dependent manner by the availability of feces. Urine added to different bedding material raised the pH and also led to bacterial growth of B. cereus in the peat. In sawdust, a dry matter content greater than 70% was needed to lower the water activity to 0.95, which is needed to inhibit the growth of B. cereus. In an attempt to reduce the bacterial growth of B. cereus and coliforms in deep sawdust beds on the farm, the effect of giving bedding daily or a full replacement of the beds was studied. The spore count of B. cereus in the back part of the free stalls before fresh bedding was added was 0.9 log units lower in stalls given daily bedding than in stalls given bedding twice weekly. No effect on coliform counts was found. Replacement of the entire sawdust bedding had an effect for a short period, but by 1 to 2 mo after replacement, the counts of B. cereus spores in the

  6. Relationship between physical exercise, muscle damage and delayed-onset muscle soreness

    Directory of Open Access Journals (Sweden)

    Denis Foschini

    2007-03-01

    Full Text Available The objective of the present study was to investigate the relationship between physical exercise involving muscle damage and delayed-onset muscle soreness (DOMS. A literature review of national and international periodicals was carried out. Muscle structures (membranes, Z-line, sarcomeres, T tubules and myofi brils can become damaged as a result of an imposed mechanical overload. Of greatest note are exercises requiring strength, particularly when muscular action is eccentric. Damage to skeletal musculature can be analyzed by direct methods (muscle biopsy or magnetic resonance or by indirect methods (maximum voluntary movement, subjective pain perception scales, analysis of enzyme and protein concentrations in blood. Creatine kinase (CK, lactate dehydrogenase (LDH, myosin heavy chain fragments, troponin-I and myoglobin can be used as indirect markers of muscle damage. Both DOMS and muscle damage can be infl uenced by the type of activity, with emphasis on eccentric muscle movements, type of exercise, velocity of the movement, interval period between series, the level of individual fi tness, this last primarily affecting beginners. When myotrauma occurs, muscle damage repair is initiated by leukocytes migrating to the injured area, although, the histamines, prostaglandins, kinins and K+ produced by neutrophils and macrophages stimulate free nerve endings in the muscle, causing the DOMS. Despite this apparent relationship between muscle damage and DOMS, it is not possible toestablish a linear relationship between these two variables, since published data are divergent. RESUMO O objetivo desse estudo foi investigar as relações do exercício físico com o dano muscular e dor muscular de início tardio (DMIT. Para tanto, foi realizada uma revisão de literatura de periódicos nacionais e internacionais. O dano muscular pode ocorrer em estruturas musculares (membranas, linha Z, sarcolema, túbulos T e miofi brilas em função da sobrecarga mec

  7. Bed blocking by elderly patients in general-hospital wards.

    Science.gov (United States)

    Rubin, S G; Davies, G H

    1975-08-01

    A point prevalence survey, using a questionnaire, was performed in three general hospitals to investigate the problem of elderly patients blocking acute-hospital beds. A total of 1010 occupied general beds were surveyed and all patients, over the age of 60 years, who had been in hospital more than four weeks, and who, in the opinion of medical and nursing staff, were no longer in need of the facilities of a general hospital, were investigated. Forty-eight patients (4.8 per cent of the total) were found to be genuinely in bed inappropriate to their needs. Rehabilitation, together with assessment of these patients, appeared disorganized and lacked consistency, and decisions regarding suitable 'disposal' appeared to be made without sufficient consultation and conformed to no detectable pattern. The main reason for the continuing bed occupancy of the patients was the length of the waiting lists for alternative residential accommodation and the main single medical factor preventing discharge home or to a hostel was the problem of mobility. By interviewing staff and patients and scrutinizing the questionnaires, it was found that 23 patients (48 per cent) were only suitable for transfer to a long-stay hospital. Of these, however, 15 (31 per cent) could be placed in specialized accommodation if some degree of nursing care, at present not available, was provided.

  8. The odorant receptor co-receptor from the bed bug, Cimex lectularius L.

    Directory of Open Access Journals (Sweden)

    Immo A Hansen

    Full Text Available Recently, the bed bug, Cimex lectularius L. has re-emerged as a serious and growing problem in many parts of the world. Presence of resistant bed bugs and the difficulty to eliminate them has renewed interest in alternative control tactics. Similar to other haematophagous arthropods, bed bugs rely on their olfactory system to detect semiochemicals in the environment. Previous studies have morphologically characterized olfactory organs of bed bugs' antenna and have physiologically evaluated the responses of olfactory receptor neurons (ORNs to host-derived chemicals. To date, odorant binding proteins (OBPs and odorant receptors (ORs associated with these olfaction processes have not been studied in bed bugs. Chemoreception in insects requires formation of heteromeric complexes of ORs and a universal OR coreceptor (Orco. Orco is the constant chain of every odorant receptor in insects and is critical for insect olfaction but does not directly bind to odorants. Orco agonists and antagonists have been suggested as high-value targets for the development of novel insect repellents. In this study, we have performed RNAseq of bed bug sensory organs and identified several odorant receptors as well as Orco. We characterized Orco expression and investigated the effect of chemicals targeting Orco on bed bug behavior and reproduction. We have identified partial cDNAs of six C. lectularius OBPs and 16 ORs. Full length bed bug Orco was cloned and sequenced. Orco is widely expressed in different parts of the bed bug including OR neurons and spermatozoa. Treatment of bed bugs with the agonist VUAA1 changed bed bug pheromone-induced aggregation behavior and inactivated spermatozoa. We have described and characterized for the first time OBPs, ORs and Orco in bed bugs. Given the importance of these molecules in chemoreception of this insect they are interesting targets for the development of novel insect behavior modifiers.

  9. Fluidization quality analyzer for fluidized beds

    Science.gov (United States)

    Daw, C.S.; Hawk, J.A.

    1995-07-25

    A control loop and fluidization quality analyzer for a fluidized bed utilizes time varying pressure drop measurements. A fast-response pressure transducer measures the overall bed pressure drop, or over some segment of the bed, and the pressure drop signal is processed to produce an output voltage which changes with the degree of fluidization turbulence. 9 figs.

  10. Fluidized bed dry dense medium coal beneficiation

    CSIR Research Space (South Africa)

    North, Brian C

    2017-10-01

    Full Text Available medium beneficiation using a fluidized bed was investigated. Bed materials of sand, magnetite and ilmenite were used in a laboratory sized cylindrical fluidized bed. The materials were individually tested, as were mixes of sand and heavy minerals. Coal...

  11. Problems of hydrocarbon resources development in new bedding zones

    International Nuclear Information System (INIS)

    Egorov, O.I.; Koszhanov, A.K.

    1997-01-01

    Intensive exploring geological surveying works were carried out for revealing of fuel resources in South Kazakhstan. Number of complex gas deposits - Ajrakty, Amangel'dy, Kumyrly and others as well as Northern Usharly and Usharal-Kemirtobe deposits of nitrogen-helium gas are recovered. Introduction its into operation has significant importance in consequence of urgent fuel deficit in region. Basic way of guaranteed gas supply to industry and population of South Kazakhstan is connected with own hydrocarbon fields development

  12. Optimization Model for Capacity Management and Bed Scheduling for Hospital

    Science.gov (United States)

    Sitepu, Suryati; Mawengkang, Herman; Husein, Ismail

    2018-01-01

    Hospital is a very important institution to provide health care for people. It is not surprising that nowadays the people’s demands for hospital is increasing.. However, due to the rising cost of healthcare services, hospitals need to consider efficiencies in order to overcome these two problems. This paper deals with an integrated strategy of staff capacity management and bed allocation planning to tackle these problems. Mathematically, the strategy can be modeled as an integer linear programming problem. We solve the model using a direct neighborhood search approach, based on the notion of superbasic variables.

  13. Review of acute cancer beds.

    LENUS (Irish Health Repository)

    Evans, D S

    2012-01-01

    A review of admissions to cancer services at University Hospital Galway (UHG) was undertaken to assess the appropriateness of hospital usage. All cancer specialty patients admitted from 26-28 May 2009 were reviewed (n = 82). Chi square tests, Exact tests, and One-way ANOVA were utilised to analyse key issues emerging from the data. Fifty (61%) were classified as emergencies. Twenty three (67%) occupied a designated cancer bed with 24 (30%) in outlying non-oncology wards. The mean length of stay was 29.3 days. Possible alternatives to admission were identified for 15 (19%) patients. There was no evidence of discharge planning for 50 (60%) admissions. There is considerable potential to make more appropriate utilisation of UHG for cancer patients, particularly in terms of reducing bed days and length of stay and the proportion of emergency cancer admissions, and further developing integrated systems of discharge planning.

  14. Designing a CR Test bed

    DEFF Research Database (Denmark)

    Cattoni, Andrea Fabio; Buthler, Jakob Lindbjerg; Tonelli, Oscar

    2014-01-01

    with their own set up, since the potential costs and efforts could not pay back in term of expected research results. Software Defined Radio solutions offer an easy way to communication researchers for the development of customized research test beds. While several hardware products are commercially available......, an overview on common research-oriented software products for SDR development, namely GNU Radio, Iris, and ASGARD, will be provided, including how to practically start the software development of simple applications. Finally, best practices and examples of all the software platforms will be provided, giving...... they are up and running in generating results. With this chapter we would like to provide a tutorial guide, based on direct experience, on how to enter in the world of test bed-based research, providing both insight on the issues encountered in every day development, and practical solutions. Finally...

  15. Comparison of fasciocutaneous V-Y and rotational flaps for defect coverage of sacral pressure sores: a critical single-centre appraisal.

    Science.gov (United States)

    Djedovic, Gabriel; Metzler, Julia; Morandi, Evi M; Wachter, Tanja; Kühn, Shafreena; Pierer, Gerhard; Rieger, Ulrich M

    2017-12-01

    Pressure sore rates remain high in both nursing homes as well as in hospitals. Numerous surgical options are available for defect coverage in the sacral region. However, objective data is scarce as to whether a specific flap design is superior to another. Here, we aim to compare two fasciocutaneous flap designs for sacral defect coverage: the gluteal rotation flap and the gluteal V-Y flap. All primary sacral pressure sores of grades III-IV that were being covered with gluteal fasciocutaneous rotational or V-Y flaps between January 2008 and December 2014 at our institution were analysed. A total of 41 patients received a total of 52 flaps. Of these, 18 patients received 20 gluteal rotational flaps, and 23 patients received 32 V-Y flaps. Both groups were comparable with regards to demographics, comorbidities and complications. Significantly more V-Y flaps were needed to cover smaller defects. Mean length of hospital stay was significantly prolonged when surgical revision had to be carried out. Both flap designs have proven safe and reliable for defect coverage after sacral pressure sores. Gluteal rotational flaps appear to be more useful for larger defects. Both flap designs facilitate their reuse in case of pressure sore recurrence. Complication rates appear to be comparable in both designs and to the current literature. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  16. Quantification and localisation of damage in rat muscles after controlled loading; a new approach to study the aetiology of pressure sores

    NARCIS (Netherlands)

    Bosboom, E.M.H.; Bouten, C.V.C.; Oomens, C.W.J.; Straaten, van H.W.M.; Baaijens, F.P.T.; Kuipers, H.

    2001-01-01

    To obtain more insight in the aetiology of deep pressure sores, an animal model was developed to relate controlled externalloading to local muscle damage. The tibialis anterior muscle (TA) and overlying skin of a rat were compressed between indentorand tibia. Loads of 10, 70 and 250 kPa at skin

  17. [Repair of pressure sores over ischial tuberosity with long head of biceps femoris muscle flap combined with semi-V posterior thigh fasciocutaneous flap].

    Science.gov (United States)

    Hai, Heng-lin; Shen, Chuan-an; Chai, Jia-ke; Li, Hua-tao

    2012-02-01

    To explore the clinical effect of transplantation of the long head of biceps femoris muscle flap in combination with semi-V posterior thigh fasciocutaneous flap for repair of pressure sores over ischial tuberosity. Eight patients with 10 deep pressure sores over ischial tuberosity were admitted to the First Affiliated Hospital to the PLA General Hospital and the 98th Hospital of PLA from April 2004 to June 2010. The wounds measured from 2 cm × 2 cm to 6 cm × 4 cm were covered with the long head of biceps femoris muscle flap and semi-V posterior thigh fasciocutaneous flap (ranged from 10 cm × 6 cm to 13 cm × 8 cm). The condition of flaps was observed and followed up for a long time. All flaps survived. Nine wounds healed by first intention. Subcutaneous accumulation of fluids occurred in one wound with formation of a sinus at drainage site, and it healed after dressing change for 25 days. Patients were followed up for 7 to 34 months. Sore recurred in one patient 9 months after surgery, and it was successfully repaired with the same flap for the second time. Flaps in the other 7 patients appeared satisfactory with soft texture and without ulceration. This combined flap is easy in formation and transfer, and it causes little side injury with good resistance against pressure. It is a new method for repair of pressure sore over sacral region.

  18. [The practice guideline 'Sore throat' (second revision) from the Dutch College of General Practitioners; a response from the perspective of otorhinolaryngology

    NARCIS (Netherlands)

    Marres, H.A.M.

    2008-01-01

    In this comment, the practice guideline 'Sore throat' (second revision) is discussed. This guideline, composed by the Dutch College of General Practitioners, offers general practitioners a well-appreciated overview of the common practices regarding diagnostic tests and treatment of pharyngitis and

  19. Importance of diagnostic laboratory methods of beta hemolytic streptococcus group A in comparison with clinical findings in the diagnosis of streptococcal sore throat and unnecessary antibacterial therapy

    Directory of Open Access Journals (Sweden)

    Peiman Eini

    2012-04-01

    Full Text Available Background: Streptococcus Pyogenes (group A streptococcus, GAS is the most important cause of bacterial pharyngitis in children and adolescents. Acute pharyngitis is one of the most common conditions in all ages but it is most common in children. Over diagnosis of acute pharyngitis represents one of the major causes of antibiotic abuse. The goal of this study is to make an estimate of the frequency of group A streptococcus in sore throat patients in Farshchian hospital emergency department and clinic in Hamadan. Methods: For estimation of the clinical features role in diagnosis of streptococcal sore throat, we took samples of 100 patients with average age of 32.96±29.86 years with sore throat. We took samples from pharynx and used standard methods of bacteriology in order to detect streptococcus. Results: Group A Streptococcus (GAS accounts for 3 percent of all cases of pharyngitis. Clinically, all of the patients had sore throat. The percent breakdowns are as follows: 30% had exudate, 78% had fever, 8% had lymphadenopathy and 7.7 percent of exudative pharyngitis was streptococcal. The cost for unnecessary antibiotic therapy for every single patient who had negative pharynx culture was approximately 32160 Rails. Conclusion: The low frequency of streptococcus pharyngitis in treated patients reveal that diagnosis based on clinical features is not reliable. We recommend use of other diagnostic methods such as Rapid Antigen Detection Tests (RATs. Only reliable and scientific protocols for antibiotic to therapy.

  20. THE BAUXITES AND JELAR - BEDS

    Directory of Open Access Journals (Sweden)

    Krešimir Sakač

    1993-12-01

    Full Text Available Minor bauxite deposits and occurrences were formed in technically disturbed environments in the middle part of the Adriatic geotectonic unit in Dinarides, contemporary with the clastic Jelar-beds in the Late Lutetian time. Uneven chemical composition of these Eocene bauxites, their sporadic occurrences in developed paleorelief as well as characteristic petrographic composition of the immediate overlying rocks point out at different genetical conditions (the paper is published in Croatian.

  1. Advances in fluidized bed technologies

    International Nuclear Information System (INIS)

    Mutanen, K.

    1992-01-01

    Atmospheric fluidized bed combustion (AFBC) has advanced into industrial cogeneration and utility-scale electric generation. During the 1980's AFBC became the dominant technology in the United States for power generation systems fired with solid fuels. Development of pressurized fluidized bed combustion/gasification (PFB/G) has grown rapidly from small bench-scale rigs to large pilot and demonstration plants. AFBC as large as 160 MWe in capacity are now in operation, while pressurized combustion systems generating 80 MWe have started up two years ago. The major driving forces behind development of fluidized bed technologies are all the time strictening emission control regulations, need for fuel flexibility, repowering of older power plants and need for higher efficiency in electricity generation. Independent power producers (IPP) and cogenerators were the first ones in the United States who accepted AFBC for wide commercial use. Their role will be dominant in the markets of the 1990's also. Developers of AFBC systems are working on designs that reduce investment costs, decrease emissions and offer even higher reliability and availability in utility-scale applications while developers of PFBC/G work on designs that increase plant efficiencies, allow modular construction, decrease emissions further and reduce the cost of generating power. This paper presents technological background, commercial status, boiler performance, emissions and future developments for both AFBC and PFBC/G systems

  2. Dynamic transition between fixed- and mobile-bed: mathematical and numerical aspects

    Science.gov (United States)

    Zugliani, Daniel; Pasqualini, Matteo; Rosatti, Giorgio

    2017-04-01

    Free-surface flows with high sediment transport (as debris flow or hyper-concentrated flow) are composed by a mixture of fluid and solid phase, usually water and sediment. When these flows propagate over loose beds, particles constituting the mixture of water and sediments strongly interact with the ones forming the bed, leading to erosion or deposition. However, there are lots of other situations when the mixture flows over rigid bedrocks or over artificially paved transects, so there is no mass exchange between bed and mixture. The two situations are usually referred to as, respectively, mobile- and fixed-bed conditions. From a mathematical point of view, the systems of Partial Differential Equations (PDEs) that describe these flows derive from mass and momentum balance of both phases, but, the two resulting PDEs systems are different. The main difference concerns the concentration: in the mobile-bed condition, the concentration is linked to the local flow conditions by means of a suitable rheological relation, while in the fixed-bed case, the concentration is an unknown of the problem. It is quite common that a free surface flow with high sediment transport, in its path, encounters both conditions. In the recent work of Rosatti & Zugliani 2015, the mathematical and numerical description of the transition between fixed- and mobile-bed was successfully resolved, for the case of low sediment transport phenomena, by the introduction of a suitable erodibility variable and satisfactory results were obtained. The main disadvantage of the approach is related to the erodibility variable, that changes in space, based on bed characteristics, but remains constant in time. However, the nature of the bed can change dynamically as result of deposition over fixed bed or high erosion over mobile bed. With this work, we extend the applicability of the mentioned approach to the more complex PDEs describing the hyper-concentrated flow. Moreover, we introduce a strategy that allows

  3. Bed agglomeration characteristics of palm shell and corncob combustion in fluidized bed

    International Nuclear Information System (INIS)

    Chaivatamaset, Pawin; Sricharoon, Panchan; Tia, Suvit

    2011-01-01

    Bed particle agglomeration was studied experimentally in an atmospheric laboratory scale fluidized bed combustor using quartz sand as bed material. Palm shell and corncob were tested. The objectives of the study were (i) to describe the contributions of the biomass ash properties and the operating conditions on the bed agglomeration tendency in term of the bed defluidization time (t def ) and the extent of potassium accumulation in the bed (K/Bed) and (ii) to further elucidate the ash inorganic behaviors and the governing bed agglomeration mechanisms. Defluidization caused by the bed agglomeration was experienced in all experiments during combustion of these biomasses, as a consequence of the presence of potassium in biomass. The experimental results indicated that biomass ash characteristics were the significant influence on the bed agglomeration. The increasing bed temperature, bed particle size and static bed height and the decreasing fluidizing air velocity enhanced the bed agglomeration tendency. The SEM/EDS analyses on the agglomerates confirmed that the agglomeration was attributed to the formation of potassium silicate liquid enriched on the surface of quartz sand particles in conjunction with the high surface temperature of the burning biomass char particles. Thermodynamic examination based on the phase diagram analysis confirmed that the molten phase formation was responsible for the agglomeration. In this study, the high molten ash fraction resulting from the high potassium content in biomass promoted the agglomeration and thus defluidization. - Highlights: → Palm shell and corncob of Thailand are tested their bed agglomeration behaviors during fluidized bed combustion. → The increase of bed temperature, bed particle size and static bed height and the decrease of air velocity enhance bed agglomeration. → The formation of ash derived potassium silicate melts enriched on sand surface is the key process. → The collision between char and sand

  4. Method and apparatus for a combination moving bed thermal treatment reactor and moving bed filter

    Energy Technology Data Exchange (ETDEWEB)

    Badger, Phillip C.; Dunn, Jr., Kenneth J.

    2015-09-01

    A moving bed gasification/thermal treatment reactor includes a geometry in which moving bed reactor particles serve as both a moving bed filter and a heat carrier to provide thermal energy for thermal treatment reactions, such that the moving bed filter and the heat carrier are one and the same to remove solid particulates or droplets generated by thermal treatment processes or injected into the moving bed filter from other sources.

  5. Biodenitrification of gaseous diffusion plant aqueous wastes: stirred bed reactor

    International Nuclear Information System (INIS)

    Holland, M.E.

    1980-01-01

    Approximately 30 kilograms of nitrates per day are discarded in the raffinates (acid wastes) of the Portsmouth Gaseous Diffusion Plant's X-705 Uranium Recovery and Decontamination Facility. A biodenitrification process employing continuous-flow, stirred-bed reactors has been successfully used to remove nitrates from similar acid wastes at the Oak Ridge Y-12 Plant. Laboratory studies have been made at Portsmouth to characterize the X-705 raffinates and to test the stirred-bed biodenitrification process on such raffinates. Raffinates which had been previously characterized were pumped through continuous-flow, stirred-bed, laboratory-scale reactors. Tests were conducted over a period of 146 days and involved variations in composition, mixing requirements, and the fate of several metal ions in the raffinates. Tests results show that 20 weight percent nitrates were reduced to a target nitrate effluent concentration of 100 μg/ml with a 99.64 percent efficiency. However, the average denitrification rate achieved was only 33% of that demonstrated with the Y-12 stirred-bed system. These low rates were probably due to the toxic effects of heavy metal ions on the denitrifying bacteria. Also, most of the uranium in the raffinate feed remained in the biomass and calcite, which collected in the reactor. This could cause criticality problems. For these reasons, it was decided not to make use of the stirred-bed bioreactor at Portsmouth. Instead, the biodenitrification installation now planned will use fluidized bed columns whose performance will be the subject of a subsequent report

  6. Dissolved oxygen control in a coupled fluidized bed system

    International Nuclear Information System (INIS)

    Jones, R.M.; Melcer, H.

    1988-01-01

    The biological fluidized bed process is a modification of more conventional fixed film processes, such as the trickling filter, in which wastewater is passed upward through a bed of granular support medium, typically sand, at a sufficient velocity to expand or fluidize the medium. The granular medium provides a large surface area for the establishment of a biological film. The fluidized bed process was selected to investigate the treatment of coking plant wastewaters in view of the significant advantages offered in terms of reduced reactor volumes that result from the high biomass concentration maintained on the support medium. The technical feasibility of treating coal distillation condensates was evaluated during a 3-year study at Environment Canada's Wastewater Technology Centre (WTC). The feed to the pilot scale test system consisted of effluent from fixed and free leg ammonia stills at the by-product coke plant of Dofasco Inc. in Hamilton, Ontario. The pilot plant consisted of two fluidized bed reactors in series, coupled to provide carbon oxidation, nitrification and denitrification in the predenitrification operating mode. The anoxic denitrification reactor was 115 mm in diameter and the oxygenic nitrification reactor, 290 mm in diameter. The bed heights and reactor volumes were adjustable by relocation of the position of the sand/biomass wasting valve. The experimental objective of this research was to determine those operating conditions required to maintain stable nitrification and complete denitrification under both steady state and dynamic operating conditions. Details regarding operating, sampling and analytic procedures have been presented elsewhere. A specific operating problem existed relating to the control of the dissolved oxygen concentration in the oxygenic fluidized bed reactor, the solution of which forms the basis of the paper

  7. Clinical evaluation of an automated turning bed.

    Science.gov (United States)

    Melland, H I; Langemo, D; Hanson, D; Olson, B; Hunter, S

    1999-01-01

    The purposes of this study were to assess client comfort and sleep quality, client physiologic response (skin and respiratory status), the effect on the need for caregiver assistance, and cost when using an automated turning bed. Nonexperimental, evaluative study. Twenty-four adult home or long-term care resident subjects who had a degenerative disease, spinal cord injury, stroke, cerebral palsy, or back surgery. Each subject agreed to use the automated turning bed for four weeks. Researchers completed a demographic survey and skin assessment, and assessed each subject for pressure ulcer risk and for the need of assistance of a care giver for turning before and after the four weeks of using the turning bed. Subjects rated the turning bed in terms of comfort and sleep quality. Subjects rated the turning bed as more comfortable than their own bed and expressed satisfaction at the pain relief attained when on the turning bed. While using the turning bed, there was a significant improvement in sleep quality. No skin breakdown or deterioration in respiratory status occurred. Fewer subjects required the assistance of a caregiver for turning when on the turning bed. This automated turning bed shows great promise in meeting a need for patients with limited mobility whether they are homebound or in a residential community. Future studies that further investigate use of the turning bed for postoperative back patients while still in the acute care setting are indicated. Replicative studies with a larger sample size are also indicated.

  8. Pain relief of sore throat with a new anti-inflammatory throat lozenge, ibuprofen 25 mg: A randomised, double-blind, placebo-controlled, international phase III study.

    Science.gov (United States)

    Bouroubi, Athmane; Donazzolo, Yves; Donath, Franck; Eccles, Ron; Russo, Marc; Harambillet, Nadine; Gautier, Stéphanie; Montagne, Agnès

    2017-09-01

    The aim of this study was to compare the efficacy and safety of a new oromucosal ibuprofen form, ibuprofen 25 mg lozenge, in single and repeat dosing for up to 4 days, to the matched placebo, in the treatment of acute sore throat pain in adults. In this randomised, double-blind, placebo-controlled trial, adult patients with non-streptococcal sore throat and signs of moderate-to-severe associated pain (≥5 on the objective Tonsillo-Pharyngitis Assessment 21-point scale and ≥60 mm on the subjective 0-100 mm visual analogue Sore Throat Pain Intensity Scale [STPIS]) were assigned ibuprofen 25 mg (n=194) or matching placebo (n=191) lozenge treatment. Efficacy was assessed (at the investigating centre up to 2 hours after first dosing, then on an ambulatory basis) by parameters derived from patient's scores on scales of pain relief, pain intensity, and global efficacy assessment. The primary efficacy end-point was the time-weighted TOTal PAin Relief (TOTPAR) over 2 hours after first dosing using the Sore Throat Relief Scale (STRS). Safety and local tolerability were assessed. Ibuprofen 25 mg was superior to placebo on numerous pain relief parameters; TOTPAR was significantly higher with ibuprofen 25 mg over 2 hours after first dosing (Ppain (n=128), after an average 4 days (Prelief of sore throat pain and is as well tolerated as placebo. ClinicalTrials.gov, NCT01785862. © 2017 John Wiley & Sons Ltd.

  9. Utility of the sore throat pain model in a multiple-dose assessment of the acute analgesic flurbiprofen: a randomized controlled study.

    Science.gov (United States)

    Schachtel, Bernard; Aspley, Sue; Shephard, Adrian; Shea, Timothy; Smith, Gary; Schachtel, Emily

    2014-07-03

    The sore throat pain model has been conducted by different clinical investigators to demonstrate the efficacy of acute analgesic drugs in single-dose randomized clinical trials. The model used here was designed to study the multiple-dose safety and efficacy of lozenges containing flurbiprofen at 8.75 mg. Adults (n=198) with moderate or severe acute sore throat and findings of pharyngitis on a Tonsillo-Pharyngitis Assessment (TPA) were randomly assigned to use either flurbiprofen 8.75 mg lozenges (n=101) or matching placebo lozenges (n=97) under double-blind conditions. Patients sucked one lozenge every three to six hours as needed, up to five lozenges per day, and rated symptoms on 100-mm scales: the Sore Throat Pain Intensity Scale (STPIS), the Difficulty Swallowing Scale (DSS), and the Swollen Throat Scale (SwoTS). Reductions in pain (lasting for three hours) and in difficulty swallowing and throat swelling (for four hours) were observed after a single dose of the flurbiprofen 8.75 mg lozenge (Pflurbiprofen-treated patients experienced a 59% greater reduction in throat pain, 45% less difficulty swallowing, and 44% less throat swelling than placebo-treated patients (all Pflurbiprofen 8.75 mg lozenges were shown to be an effective, well-tolerated treatment for sore throat pain. Other pharmacologic actions (reduced difficulty swallowing and reduced throat swelling) and overall patient satisfaction from the flurbiprofen lozenges were also demonstrated in this multiple-dose implementation of the sore throat pain model. This trial was registered with ClinicalTrials.gov, registration number: NCT01048866, registration date: January 13, 2010.

  10. Increased technetium uptake is not equivalent to muscle necrosis: scintigraphic, morphological and intramuscular pressure analyses of sore muscles after exercise

    Science.gov (United States)

    Crenshaw, A. G.; Friden, J.; Hargens, A. R.; Lang, G. H.; Thornell, L. E.

    1993-01-01

    A scintigraphic technique employing technetium pyrophosphate uptake was used to identify the area of skeletal muscle damage in the lower leg of four runners 24 h after an ultramarathon footrace (160 km). Most of the race had been run downhill which incorporated an extensive amount of eccentric work. Soreness was diffuse throughout the posterior region of the lower leg. In order to interpret what increased technetium uptake reflects and to express extreme endurance related damages, a biopsy was taken from the 3-D position of abnormal uptake. In addition, intramuscular pressures were determined in the deep posterior compartment. Scintigraphs revealed increased technetium pyrophosphate uptake in the medial portion of the gastrocnemius muscle. For 3698 fibres analysed, 33 fibres (1%) were necrotic, while a few other fibres were either atrophic or irregular shaped. A cluster of necrotic fibres occurred at the fascicular periphery for one subject and fibre type grouping occurred for another. Ultrastructural analysis revealed Z-line streaming near many capillaries and variously altered subsarcolemmal mitochondria including some with paracrystalline inclusions. The majority of the capillaries included thickened and irregular shaped endothelial cells. Intramuscular pressures of the deep posterior compartment were slightly elevated (12-15 mmHg) for three of the four subjects. Increased technetium uptake following extreme endurance running does not just reflect muscle necrosis but also subtle fibre abnormalities. Collectively, these pathological findings are attributed to relative ischaemia occurring during the race and during pre-race training, whereas, intramuscular pressure elevations associated with muscle soreness are attributed to mechanical stress caused by extensive eccentric work during the race.

  11. A retrospective study: Multivariate logistic regression analysis of the outcomes after pressure sores reconstruction with fasciocutaneous, myocutaneous, and perforator flaps.

    Science.gov (United States)

    Chiu, Yu-Jen; Liao, Wen-Chieh; Wang, Tien-Hsiang; Shih, Yu-Chung; Ma, Hsu; Lin, Chih-Hsun; Wu, Szu-Hsien; Perng, Cherng-Kang

    2017-08-01

    Despite significant advances in medical care and surgical techniques, pressure sore reconstruction is still prone to elevated rates of complication and recurrence. We conducted a retrospective study to investigate not only complication and recurrence rates following pressure sore reconstruction but also preoperative risk stratification. This study included 181 ulcers underwent flap operations between January 2002 and December 2013 were included in the study. We performed a multivariable logistic regression model, which offers a regression-based method accounting for the within-patient correlation of the success or failure of each flap. The overall complication and recurrence rates for all flaps were 46.4% and 16.0%, respectively, with a mean follow-up period of 55.4 ± 38.0 months. No statistically significant differences of complication and recurrence rates were observed among three different reconstruction methods. In subsequent analysis, albumin ≤3.0 g/dl and paraplegia were significantly associated with higher postoperative complication. The anatomic factor, ischial wound location, significantly trended toward the development of ulcer recurrence. In the fasciocutaneous group, paraplegia had significant correlation to higher complication and recurrence rates. In the musculocutaneous flap group, variables had no significant correlation to complication and recurrence rates. In the free-style perforator group, ischial wound location and malnourished status correlated with significantly higher complication rates; ischial wound location also correlated with significantly higher recurrence rate. Ultimately, our review of a noteworthy cohort with lengthy follow-up helped identify and confirm certain risk factors that can facilitate a more informed and thoughtful pre- and postoperative decision-making process for patients with pressure ulcers. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All

  12. Scaling of permeabilities and friction factors of homogeneously expanding gas-solids fluidized beds: Geldart’s A powders and magnetically stabilized beds

    Directory of Open Access Journals (Sweden)

    Hristov Jordan Y.

    2006-01-01

    Full Text Available The concept of a variable friction factor of fluid-driven de form able powder beds undergoing fluidization is discussed. The special problem discussed addresses the friction factor and bed permeability relationships of Geldart’s A powders and magnetically stabilized beds in axial fields. Governing equations and scaling relation ships are developed through three approaches (1 Minimization of the pressure drop with respect to the fluid velocity employing the Darcy-Forchheimer equation together with the Richardson-Zaki scaling law, (2 Minimization of the pres sure drop across an equivalent-channel replacing the actual packed beds by a straight pipe with bed-equivalent obstacle of a simple geometry, and (3 Entropy minimization method applied in cases of the Darcy-Forchheimer equation and the equivalent-channel model. Bed-to-surface heat transfer coefficients are commented in the context of the porosity/length scale relationships developed. Both the pressure drop curves developments and phase diagram de signs are illustrated by applications of the intersection of asymptotes technique to beds exhibiting certain degree of cohesion.

  13. The Safety of Hospital Beds: Ingress, Egress, and In-Bed Mobility.

    Science.gov (United States)

    Morse, Janice M; Gervais, Pierre; Pooler, Charlotte; Merryweather, Andrew; Doig, Alexa K; Bloswick, Donald

    2015-01-01

    To explore the safety of the standard and the low hospital bed, we report on a microanalysis of 15 patients' ability to ingress, move about the bed, and egress. The 15 participants were purposefully selected with various disabilities. Bed conditions were randomized with side rails up or down and one low bed with side rails down. We explored the patients' use of the side rails, bed height, ability to lift their legs onto the mattress, and ability to turn, egress, and walk back to the chair. The standard bed was too high for some participants, both for ingress and egress. Side rails were used by most participants when entering, turning in bed, and exiting. We recommend that side rails be reconsidered as a means to facilitate in-bed movement, ingress, and egress. Furthermore, single deck height settings for all patients are not optimal. Low beds as a safety measure must be re-evaluated.

  14. Cases of bed bug (Cimex lectularius infestations in Northwest Italy

    Directory of Open Access Journals (Sweden)

    Federica Giorda

    2013-12-01

    Full Text Available Bed bugs (Cimex lectularius have been a common problem for humans for at least 3,500 years and in Europe their presence was endemic until the end of World War II, when infestations began to decrease. However, since the beginning of the 21st century new cases of infestations have been reported in developed countries. Many theories have been put forward to explain this change of direction, but none has been scientifically proven. The aim of this study is to provide some reports of bed bug infestations in Northern Italy (Liguria, Piedmont and Aosta valley regions and a brief summary about their identification, clinical significance, bioecology and control. From 2008 to date, 17 bed bug infestations were identified in Northwest Italy. Knowledge about the presence and distribution of bed bugs in Italy is scanty, prior to this work only 2 studies reported the comeback of these arthropods in the Italian territory; further investigations would be necessary to better understand the current situation.

  15. Analysis of wall-packed-bed thermal interactions

    International Nuclear Information System (INIS)

    Gorbis, Z.R.; Tillack, M.S.; Tehranian, F.; Abdou, M.A.

    1995-01-01

    One of the major issues remaining for ceramic breeder blankets involves uncertainties in heat transfer and thermomechanical interactions within the breeder and multiplier regions. Particle bed forms are considered in many reactor blanket designs for both the breeder and Be multiplier. The effective thermal conductivity of beds and the wall-bed thermal conductance are still not adequately characterized, particularly under the influence of mechanical stresses. The problem is particularly serious for the wall conductance between Be and its cladding, where the uncertainty can be greater than 50%. In this work, we describe a new model for the wall-bed conductance that treats the near-wall region as a finite-width zone. The model includes an estimate of the region porosity based on the number of contact points, and the contact area for smooth surfaces. It solves the heat conduction in a near-wall unit cell. The model is verified with existing data and used to predict the range of wall conductances expected in future simulation experiments and in reactor applications. (orig.)

  16. [Special beds. Pulmonary therapy system].

    Science.gov (United States)

    Calixto Rodríguez, Joaquín; Rodríguez Martínez, Xavier; Marín i Vivó, Gemma; Paunellas Albert, Josep

    2008-10-01

    To be bedridden reduces one's capacity to move and produces muscular debility that affects the respiratory system leading to a decreased effectiveness in expectoration, the ability to spit up sputum. The pulmonary therapy system integrated in a bed is the result of applying motorized elements to the articulation points of the bad in order to achieve safe positions at therapeutic angles, which improve the breathing-perfusion (blood flow) relationship. This system also makes it possible to apply vibration waves to the patient which favor the elimination of bronchial-pulmonary secretions, the rehabilitation of the bedridden patient and decrease the work load for nursing personnel.

  17. Particle bed reactor scaling relationships

    Science.gov (United States)

    Slovik, G.; Araj, K.; Horn, F. L.; Ludewig, H.; Benenati, R.

    The Particle Bed Reactor (PBR) concept can be used in several applications both as part of a power generating system or as a direct propulsion unit. In order to carry out optimization studies of systems involving a PBR, it is necessary to know the variation of the critical mass with pertinent system parameters such as weight, size, power level and thrust level. A parametric study is presented for all the practical combinations of fuel and moderating material. The PBR is described, the practical combinations of materials and dimensions are discussed, and an example is presented.

  18. An assessment of biological processes close to the sea bed in a slope region and its significance to the assessment of sea bed disposal of radioactive waste

    International Nuclear Information System (INIS)

    Hargreaves, P.M.; Ellis, C.J.; Angel, M.V.

    1984-01-01

    Vertical profiles of planktonic and micronektonic biomass observed close to the sea bed along a transect running up the continental slope on the southern flank of the Porcupine Seabight (to the southwest of Ireland) showed that a doubling in biomass concentration occurs from 100 to 10m above the sea bed. Comparison with biomass concentrations at two deep water stations, one in the Seabight and the other in the Rockall Trough, showed that there was a consistent increase in standing crop close to the sea bed over the slope. Supplementary data were collected on the northern flank of the Seabight. Analysis of both taxonomic groups and individual species showed that some taxa were more abundant near the sea floor and extended their vertical ranges to greater depths over the slope than over deep water, other taxa were unaffected. The implications to the problem of assessing the safety of sea bed disposal of high level radioactive waste are summarised. (author)

  19. A polytropic model of a critical two-phase flow in a bed of spherical particles

    Directory of Open Access Journals (Sweden)

    Tairov Emir

    2017-01-01

    Full Text Available The paper is concerned with a model of isenthalpic flow of vapor-water mixture in a fixed bed of solid particles. The mixture expansion process is considered to be polytropic. Similarly to the known problem of gas dynamics of a granular bed we obtained the relationships for calculation of a critical mass velocity. The results of the calculation based on a theoretical model are compared with the experimental data obtained in the packed beds of steel balls, 2 mm and 4 mm in diameter.

  20. Production of renewable energy from biomass and waste materials using fluidized bed technologies

    International Nuclear Information System (INIS)

    Rozainee, M.; Rashid, M.; Looi, S.

    2000-01-01

    Malaysian industries generate substantial amount of biomass and waste materials such as wastes from agricultural and wood based industries, sludge waste from waste-water treatment plants and solid waste from municipals. Incinerating these waste materials not only produces renewable energy, but also solving their disposal problems. Fluidized bed combustors are widely used for incinerating these biomass materials. The significant advantages of fluidized bed incineration include simple design, efficient, and ability to reduce air pollution emissions. This paper discusses the opportunities and challenges of producing the green energy from biomass materials using the fluidized bed technologies. (Author)

  1. An Evaluation of Reed Bed Technology to Dewater Army Wastewater Treatment Plant Sludge

    Science.gov (United States)

    1993-09-01

    speculated that the plants produced "root exudations" that were active against pathogens , and that the plants specifically showed an affinity for cadmium, zinc...mineralize and for pathogens to be destroyed. This downtime makes multiple beds necessary. The USEPA also reports that the major advantage of the reed...employee to regulate the sludge applications. This employee would also visually assess the beds for possible problems such as weed or insect ( aphid

  2. Head of the bed elevation angle recorder for intensive care unit

    Science.gov (United States)

    Krefft, Maciej; Zamaro-Michalska, Aleksandra; Zabołotny, Wojciech M.; Zaworski, Wojciech; Grzanka, Antoni; Łazowski, Tomasz; Tavola, Mario; Siewiera, Jacek; Mikaszewska-Sokolewicz, Małgorzata

    2013-10-01

    This paper presents a recording system optimized for long term measurement of bed headrest elevation angle in the Intensive Care Unit. The continuous monitoring of this parameter allows to find the correlation between the patient's position in bed and the risk of the Ventilator Associated Pneumonia (VAP), a very serious problem in therapy of critically ill patients. Recorder might be be an important tool to evaluate the "care bundles" - sets of preventive procedures recommended for treatment of patients in the ICU.

  3. Fluid-bed process for SYNROC production

    International Nuclear Information System (INIS)

    Ackerman, F.J.; Grens, J.Z.; Ryerson, F.J.; Hoenig, C.L.; Bazan, F.; Peters, P.E.; Smith, R.; Campbell, J.H.

    1983-01-01

    SYNROC is a titanate-based ceramic waste developed for the immobilization of high-level nuclear reactor waste. Lawrence Livermore National Laboratory (LLNL) has investigated a fluid-bed technique for the large-scale production of SYNROC precursor powders. Making SYNROC in a fluid bed permits slurry drying, calcination and reduction-oxidation reactions to be carried out in a single unit. We present the results of SYNROC fluid-bed studies from two fluid-bed units 10 cm in diameter: an internally heated fluid-bed unit developed by Exxon Idaho and an externally heated unit constructed at LLNL. Bed operation over a range of temperatures, feed rates, fluidizing rates, and redox conditions indicate that SYNROC powders of a high density and a uniform particle size can be produced. These powders facilitate the densification step and yield dense ceramics (greater than 95% theoretical density) with well-developed phases and low leaching rates

  4. On partial fluidization in rotating fluidized beds

    International Nuclear Information System (INIS)

    Kao, J.; Pfeffer, R.; Tardos, G.I.

    1987-01-01

    In a rotating fluidized bed, unlike in a conventional fluidized bed, the granules are fluidized layer by layer from the (inner) free surface outward at increasing radius as the gas velocity is increased. This is a very significant and interesting phenomenon and is extremely important in the design of these fluidized beds. The phenomenon was first suggested in a theoretical analysis and recently verified experimentally in the authors' laboratory. However, in the first paper, the equations presented are too cumbersome and the influence of bed thickness is not clearly stated. In this note the authors present simplified equations, based on that paper, for the pressure drop and the minimum fluidizing velocities in a rotating fluidized bed. Experimental data are also shown and compared with the theoretical model, and the effect of bed thickness is shown. Furthermore, an explanation for the observation of a maximum in the pressure drop vs. velocity curve instead of the plateau derived by Chen is proposed

  5. MIT pebble bed reactor project

    Energy Technology Data Exchange (ETDEWEB)

    Kadak, Andrew C. [Massachusetts Institute of Technology, Cambridge (United States)

    2007-03-15

    The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis.

  6. MIT pebble bed reactor project

    International Nuclear Information System (INIS)

    Kadak, Andrew C.

    2007-01-01

    The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis

  7. Gas distributor for fluidized bed coal gasifier

    Science.gov (United States)

    Worley, Arthur C.; Zboray, James A.

    1980-01-01

    A gas distributor for distributing high temperature reaction gases to a fluidized bed of coal particles in a coal gasification process. The distributor includes a pipe with a refractory reinforced lining and a plurality of openings in the lining through which gas is fed into the bed. These feed openings have an expanding tapered shape in the downstream or exhaust direction which aids in reducing the velocity of the gas jets as they enter the bed.

  8. Characteristics of Sawdust and Cocopeat Beddings, and Their Usefulness According to the Fan and Pen Location for Rearing Hanwoo Cattle.

    Science.gov (United States)

    Ahn, Gyu Chul; Jang, Sun Sik; Lee, Kang Yeon; Kwak, Wan Sup; Oh, Young Kyun; Park, Keun Kyu

    2016-03-01

    This study was designed to examine the characteristics of sawdust and cocopeat bedding materials, including physicochemical properties (Exp. I) and on-farm trial (Exp. II). In Exp. I, the proportion of particle size was in the order of sawdust> cocopeat India>cocopeat Vietnam (pcocopeat Vietnam>sawdust (pfan (blowing 2.00 m/s) and no fan treatments, and feed bunk side (FB) and water supply side (WS) within a pen (4.5 m, width×9.0 m, length). Beddings were replaced with fresh bedding materials when moisture concentrations were over 65%. No interactions among treatments were detected for moisture concentration and increment rates, and ammonia concentrations, but a significant effect was observed (pfan than with fan. Moisture concentrations and increment rate within a pen were also higher (pfan-FB and sawdust-fan-FB were replaced with fresh bedding material between 4 to 5 experimental weeks. The ammonia concentrations and pH of beddings were not significantly different among treatments. Therefore, using cocopeat bedding with a blowing fan can extend twice the bedding utilization period, and WS within a pen showed twice the bedding-life compared to FB. Despite the outstanding characteristics of cocopeat compared with sawdust, using cocopeat as an alternative for sawdust bedding is not recommended for cattle management, considering it has 4.4 times higher bedding cost and a dust production problem.

  9. Fluidized Bed Reactor as Solid State Fermenter

    Directory of Open Access Journals (Sweden)

    Krishnaiah, K.

    2005-01-01

    Full Text Available Various reactors such as tray, packed bed, rotating drum can be used for solid-state fermentation. In this paper the possibility of fluidized bed reactor as solid-state fermenter is considered. The design parameters, which affect the performances are identified and discussed. This information, in general can be used in the design and the development of an efficient fluidized bed solid-state fermenter. However, the objective here is to develop fluidized bed solid-state fermenter for palm kernel cake conversion into enriched animal and poultry feed.

  10. Fungi solubilisation of low rank coal: performances of stirred tank, fluidised bed and packed bed reactors

    CSIR Research Space (South Africa)

    Oboirien, BO

    2013-02-01

    Full Text Available Coal biosolubilisation was investigated in stirred tank reactor, fluidised bed and fixed bed bioreactors with a view to highlight the advantages and shortcomings of each of these reactor configurations. The stirred aerated bioreactor and fluidised...

  11. Visualization of bed material movement in a simulated fluidized bed heat exchanger by neutron radiography

    International Nuclear Information System (INIS)

    Umekawa, Hisashi; Ozawa, Mamoru; Takenaka, Nobuyuki; Matsubayashi, Masahito

    1999-01-01

    The bulk movement of fluidized bed material was visualized by neutron radiography by introducing tracers into the bed materials. The simulated fluidized bed consisted of aluminum plates, and the bed material was sand of 99.7% SiO 2 (mean diameter: 0.218 mm, density: 2555 kg/m 3 ). Both materials were almost transparent to neutrons. Then the sand was colored by the contamination of the sand coated by CdSO 4 . Tracer particles of about 2 mm diameter were made by the B 4 C, bonded by the vinyl resin. The tracer was about ten times as large as the particle of fluidized bed material, but the traceability was enough to observe the bed-material bulk movement owing to the large effective viscosity of the fluidized bed. The visualized images indicated that the bubbles and/or wakes were important mechanism of the behavior of the fluidized bed movement

  12. Propagation of a Strong Shock Over a Random Bed of Spherical Particles

    Energy Technology Data Exchange (ETDEWEB)

    Mehta, Y. [Univ. of Florida, Gainesville, FL (United States); Neal, C. [Univ. of Florida, Gainesville, FL (United States); Salari, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jackson, T. L. [Univ. of Florida, Gainesville, FL (United States); Balachandar, S. [Univ. of Florida, Gainesville, FL (United States); Thakur, S. [Univ. of Florida, Gainesville, FL (United States)

    2017-04-11

    Propagation of a strong shock through a bed of particles results in complex wave dynamics such as a reflected shock, a transmitted shock, and highly unsteady flow inside the particle bed. In this paper we present three-dimensional numerical simulations of shock propagation in air over a random bed of particles. We assume the flow is inviscid and governed by the Euler equations of gas dynamics. Simulations are carried out by varying the volume fraction of the particle bed at a fixed shock Mach number. We compute the unsteady inviscid streamwise and transverse drag coefficients as a function of time for each particle in the random bed as a function of volume fraction. We show that (i) there are significant variations in the peak drag for the particles in the bed, (ii) the mean peak drag as a function of streamwise distance through the bed decreases with a slope that increases as the volume fraction increases, and (iii) the deviation from the mean peak drag does not correlate with local volume fraction. We also present the local Mach number and pressure contours for the different volume fractions to explain the various observed complex physical mechanisms occurring during the shock-particle interactions. Since the shock interaction with the random bed of particles leads to transmitted and reflected waves, we compute the average flow properties to characterize the strength of the transmitted and reflected shock waves and quantify the energy dissipation inside the particle bed. Finally, to better understand the complex wave dynamics in a random bed, we consider a simpler approximation of a planar shock propagating in a duct with a sudden area change. We obtain Riemann solutions to this problem, which are used to compare with fully resolved numerical simulations.

  13. Bed erosion control at 60 degree river confluence using vanes

    Science.gov (United States)

    Wuppukondur, Ananth; Chandra, Venu

    2017-04-01

    Confluences are common occurrences along natural rivers. Hydrodynamics at the confluence is complex due to merging of main and lateral flows with different characteristics. Bed erosion occurs at the confluence due to turbulence and also secondary circulation induced by centrifugal action of the lateral flow. The eroded sediment poses various problems in the river ecosystem including river bank failure. Reservoirs are majorly affected due to sediment deposition which reduces storage capacity. The bed erosion also endangers stability of pipeline crossings and bridge piers. The aim of this experimental study is to check the performance of vanes in controlling bed erosion at the confluence. Experiments are performed in a 600 confluence mobile bed model with a non-uniform sediment of mean particle size d50 = 0.28mm. Discharge ratio (q=ratio of lateral flow discharge to main flow discharge) is maintained as 0.5 and 0.75 with a constant average main flow depth (h) of 5cm. Vanes of width 0.3h (1.5cm) and thickness of 1 mm are placed along the mixing layer at an angle of 150, 300 and 600(with respect to main flow) to perform the experiments. Also, two different spacing of 2h and 3h (10cm and 15cm) between the vanes are used for conducting the experiments. A digital point gauge with an accuracy of ±0.1mm is used to measure bed levels and flow depths at the confluence. An Acoustic Doppler Velocitimeter (ADV) with a frequency of 25Hz and accuracy of ±1mm/s is used to measure flow velocities. Maximum scour depth ratio Rmax, which is ratio between maximum scour depth (Ds) and flow depth (h), is used to present the experimental results.From the experiments without vanes, it is observed that the velocities are increasing along the mixing layer and Rmax=0.82 and 1.06, for q=0.5 and 0.75, respectively. The velocities reduce with vanes since roughness increases along the mixing layer. For q=0.5 and 0.75, Rmax reduces to 0.62 and 0.7 with vanes at 2h spacing, respectively. Similarly

  14. Development and application of surrogate model for assessment of ex-vessel debris bed dryout probability - 15157

    International Nuclear Information System (INIS)

    Yakush, S.E.; Lubchenko, N.T.; Kudinov, P.

    2015-01-01

    In this work we consider a water-cooled power reactor severe accident scenario with pressure vessel failure and subsequent release of molten corium. A surrogate model for prediction of dryout heat flux for ex-vessels debris beds of different shapes is developed. Functional form of dryout heat flux dependence on problem parameters is developed by the analysis of coolability problem in non-dimensional variables. It is shown that for a flat debris bed the dryout heat flux can be represented in terms of three 1-dimensional functions for which approximating formulas are found. For two-dimensional debris beds (cylindrical, conical, Gaussian heap, mound-shaped), an additional function taking into account the bed shape geometry is obtained from numerical simulations using DECOSIM code as a full model. With the surrogate model in hand, risk analysis of debris bed coolability is carried out by Monte Carlo sampling of the input parameters within selected ranges, with assumed distribution functions

  15. Metabolic Resistance in Bed Bugs

    Directory of Open Access Journals (Sweden)

    Omprakash Mittapalli

    2011-03-01

    Full Text Available Blood-feeding insects have evolved resistance to various insecticides (organochlorines, pyrethroids, carbamates, etc. through gene mutations and increased metabolism. Bed bugs (Cimex lectularius are hematophagous ectoparasites that are poised to become one of the major pests in households throughout the United States. Currently, C. lectularius has attained a high global impact status due to its sudden and rampant resurgence. Resistance to pesticides is one factor implicated in this phenomenon. Although much emphasis has been placed on target sensitivity, little to no knowledge is available on the role of key metabolic players (e.g., cytochrome P450s and glutathione S-transferases towards pesticide resistance in C. lectularius. In this review, we discuss different modes of resistance (target sensitivity, penetration resistance, behavioral resistance, and metabolic resistance with more emphasis on metabolic resistance.

  16. Debridement and wound bed preparation.

    Science.gov (United States)

    Falabella, Anna F

    2006-01-01

    Debridement can play a vital role in wound bed preparation and the removal of barriers that impair wound healing. In accordance with the TIME principles, debridement can help remove nonviable tissue, control inflammation or infection, decrease excess moisture, and stimulate a nonadvancing wound edge. There are many types of debridement, each with a set of advantages and disadvantages that must be clearly understood by the healthcare team. Failure to use the correct debridement method for a given type of wound may lead to further delays in healing, increase patient suffering, and unnecessarily increase the cost of care. This review article discusses the various methods of debridement, describes currently available debriding agents, evaluates the clinical data regarding their efficacy and safety, and describes strategies for the management of problematic nonhealing wounds.

  17. Particle Bed Reactor engine technology

    Science.gov (United States)

    Sandler, S.; Feddersen, R.

    1992-03-01

    This paper discusses the Particle Bed Reactor (PBR) based propulsion system being developed under the Space Nuclear Thermal Propulsion (SNTP) program. A PBR engine is a light weight, compact propulsion system which offers significant improvement over current technology systems. Current performance goals are a system thrust of 75,000 pounds at an Isp of 1000 sec. A target thrust to weight ratio (T/W) of 30 has been established for an unshielded engine. The functionality of the PBR, its pertinent technology issues and the systems required to make up a propulsion system are described herein. Accomplishments to date which include hardware development and tests for the PBR engine are also discussed. This paper is intended to provide information on and describe the current state-of-the-art of PBR technology.

  18. Particle Bed Reactor engine technology

    International Nuclear Information System (INIS)

    Sandler, S.; Feddersen, R.

    1992-01-01

    This paper discusses the Particle Bed Reactor (PBR) based propulsion system being developed under the Space Nuclear Thermal Propulsion (SNTP) program. A PBR engine is a light weight, compact propulsion system which offers significant improvement over current technology systems. Current performance goals are a system thrust of 75,000 pounds at an Isp of 1000 sec. A target thrust to weight ratio (T/W) of 30 has been established for an unshielded engine. The functionality of the PBR, its pertinent technology issues and the systems required to make up a propulsion system are described herein. Accomplishments to date which include hardware development and tests for the PBR engine are also discussed. This paper is intended to provide information on and describe the current state-of-the-art of PBR technology. 4 refs

  19. Temperature profile in a fix-bed reactor and with cylindrical geometry by the method of orthogonal collocation

    International Nuclear Information System (INIS)

    Basta, C.

    1982-01-01

    Using the method of orthogonal colocation the boundary problem for a fix bed with cylindrical geometry was solved. The axial disposal term was despicable and the results were compared with those the explicit finite difference method. (E.G.) [pt

  20. Pulsed atmospheric fluidized bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    1989-11-01

    In order to verify the technical feasibility of the MTCI Pulsed Atmospheric Fluidized Bed Combustor technology, a laboratory-scale system was designed, built and tested. Important aspects of the operational and performance parameters of the system were established experimentally. A considerable amount of the effort was invested in the initial task of constructing an AFBC that would represent a reasonable baseline against which the performance of the PAFBC could be compared. A summary comparison of the performance and emissions data from the MTCI 2 ft {times} 2 ft facility (AFBC and PAFBC modes) with those from conventional BFBC (taller freeboard and recycle operation) and circulating fluidized bed combustion (CFBC) units is given in Table ES-1. The comparison is for typical high-volatile bituminous coals and sorbents of average reactivity. The values indicated for BFBC and CFBC were based on published information. The AFBC unit that was designed to act as a baseline for the comparison was indeed representative of the larger units even at the smaller scale for which it was designed. The PAFBC mode exhibited superior performance in relation to the AFBC mode. The higher combustion efficiency translates into reduced coal consumption and lower system operating cost; the improvement in sulfur capture implies less sorbent requirement and waste generation and in turn lower operating cost; lower NO{sub x} and CO emissions mean ease of site permitting; and greater steam-generation rate translates into less heat exchange surface area and reduced capital cost. Also, the PAFBC performance generally surpasses those of conventional BFBC, is comparable to CFBC in combustion and NO{sub x} emissions, and is better than CFBC in sulfur capture and CO emissions even at the scaled-down size used for the experimental feasibility tests.

  1. Supplementation with a Polyphenol-Rich Extract, TensLess® , Attenuates Delayed Onset Muscle Soreness and Improves Muscle Recovery from Damages After Eccentric Exercise.

    Science.gov (United States)

    Romain, Cindy; Freitas, Tomás T; Martínez-Noguera, Francisco J; Laurent, Caroline; Gaillet, Sylvie; Chung, Linda H; Alcaraz, Pedro E; Cases, Julien

    2017-11-01

    High-intensity exercises are known to provoke delayed onset muscle soreness (DOMS). Delayed onset muscle soreness typically occurs within the first 24 h, peaks between 24 and 72 h, and can last as long as 5-7 days post-exercise. Delayed onset muscle soreness is a multifactorial process involving both mechanical and biochemical components, associated with clinical features that may limit range of motion, and athletes seek for effective recovery strategies to optimize future training sessions. TensLess ® is a food supplement developed to help manage post-exercise recovery. The supplement has been investigated on 13 recreationally active athletes of both sex, during a randomized, double-blind, and crossover clinical investigation, including a 3-week washout period. The clinical investigation was based on the study of TensLess ® effects for DOMS management and on the reduction of associated muscle damages following an eccentric exercise protocol. Supplementation with TensLess ® induced significant decrease in DOMS perception (-33%; p = 0.008) as of the first 24 h; this was significantly correlated with a lowered release of muscle damage-associated biomarkers, namely myoglobin, creatinine, and creatine kinase, for the whole length of the recovery period. Taken together, these positive results clearly indicate that post-exercise supplementation with TensLess ® may preserve myocytes and reduce soreness following eccentric exercise-induced damages, and, accordingly, significantly shorten muscle recovery. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  2. Telemedicine Physical Examination Utilizing a Consumer Device Demonstrates Poor Concordance with In-Person Physical Examination in Emergency Department Patients with Sore Throat: A Prospective Blinded Study.

    Science.gov (United States)

    Akhtar, Moneeb; Van Heukelom, Paul G; Ahmed, Azeemuddin; Tranter, Rachel D; White, Erinn; Shekem, Nathaniel; Walz, David; Fairfield, Catherine; Vakkalanka, J Priyanka; Mohr, Nicholas M

    2018-02-22

    Telemedicine allows patients to connect with healthcare providers remotely. It has recently expanded to evaluate low-acuity illnesses such as pharyngitis by using patients' personal communication devices. The purpose of our study was to compare the telemedicine-facilitated physical examination with an in-person examination in emergency department (ED) patients with sore throat. This was a prospective, observational, blinded diagnostic concordance study of patients being seen for sore throat in a 60,000-visit Midwestern academic ED. A telemedicine and a face-to-face examination were performed independently by two advanced practice providers (APP), blinded to the results of the other evaluator. The primary outcome was agreement on pharyngeal redness between the evaluators, with secondary outcomes of agreement and inter-rater reliability on 14 other aspects of the pharyngeal physical examination. We also conducted a survey of patients and providers to evaluate perceptions and preferences for sore throat evaluation using telemedicine. Sixty-two patients were enrolled, with a median tonsil size of 1.0. Inter-rater agreement (kappa) for tonsil size was 0.394, which was worse than our predetermined concordance threshold. Other kappa values ranged from 0 to 0.434, and telemedicine was best for detecting abnormal coloration of the palate and tender superficial cervical lymph nodes (anterior structures), but poor for detecting abnormal submandibular lymph nodes or asymmetry of the posterior pharynx (posterior structures). In survey responses, telemedicine was judged easier to use and more comfortable for providers than patients; however, neither patients nor providers preferred in-person to telemedicine evaluation. Telemedicine exhibited poor agreement with the in-person physical examination on the primary outcome of tonsil size, but exhibited moderate agreement on coloration of the palate and cervical lymphadenopathy. Future work should better characterize the importance of

  3. [Multicentre, prospective cohort study, to validate the Italian version of the Braden Q scale for the risk of the pressure sores in newborns and up to 8 years old children].

    Science.gov (United States)

    Chiari, Paolo; Poli, Marco; Magli, Claudia; Bascelli, Emanuele; Rocchi, Roberto; Bolognini, Silvia; Tartari, Piero; Armuzzi, Roberta; Rossi, Gianna; Peghetti, Angela; Biavati, Catia; Fontana, Mirella; Gazineo, Domenica; Cordella, Simona; Tiozzo, Emanuela; Ciliento, Gaetano; Carta, Giovanna; Taddia, Patrizia

    2012-01-01

    Multicenter prospective cohort study, to validate the Italian version of the Braden Q scale for the risk of pressure sores in newborns and up to 8 years old children. Children admitted to Intensive care Units (ICU), oncology and neurology/neurosurgery wards are at risk of developing pressure sores. To validate the Italian version of the Braden Q scale for the assessment of the risk of developing pressure sores in children. Children from 21 days to 8 years, admitted to intensive and sub intensive units were recruited. Premature babies, children admitted with a pressure sore and with a story of congenital cardiomiopathy were excluded. In this cohort, multicentre and with repeated measurements study, the first assessment was performed after 24 hours from hospital admission, using the Braden Q Scale (Suddaby's version). The pressure sores were assessed with the Skin assessment Tool and staged according to the National Pressure Ulcer Advisory Panel. RESULTS. On the 157 children 524 observation were conducted. The incidence of pressure sores was 17.2%. Only the analysis on specific subgroups of patients showed a good diagnostic accuracy: 71.4% on children 3-8 years; 85.6% in sub intensive wards. The Braden Q scale may be reliably used and shows a good diagnostic accuracy in children 3-8 years of age admitted to sub-intensive, neurology, oncology and heamatology wards.

  4. A New Option for the Reconstruction of Primary or Recurrent Ischial Pressure Sores: Hamstring-Adductor Magnus Muscle Advancement Flap and Direct Closure.

    Science.gov (United States)

    Burm, Jin Sik; Hwang, Jungil; Lee, Yung Ki

    2018-04-01

    Owing to the high recurrence rates of ischial pressure sores, surgeons should consider the possibility of future secondary flap surgery during flap selection. The purpose of this article is to present a new surgical option for the reconstruction of primary or recurrent ischial pressure sores using a simple hamstring-adductor magnus advancement flap and direct closure. After horizontal fusiform skin excision, complete bursa excision and ischiectomy were performed. The tenomuscular origin of the adductor magnus and the conjoined tenomuscular origin of the biceps femoris long head and semitendinosus were isolated and completely detached from the inferior border of the ischial tuberosity. They were then advanced in a cephalad direction without detachment of the distal tendon or muscle and securely affixed to the sacrotuberous ligament. The wound was directly closed without further incision or dissection. Twelve ischial pressure sores (6 primary and 6 recurrent; 12 patients) were surgically corrected. The follow-up period was 12 to 65 months. All patients healed successfully without early postoperative complications, such as hematoma, seroma, infection, wound dehiscence, or partial necrosis. Late complications included wound disruption 5 weeks after surgery that spontaneously healed in 1 case and recurrence 3 years later in another case. The new surgical option presented herein, which involves hamstring-adductor magnus advancement flap and direct closure, is a simple and reliable method for providing sufficient muscle bulk to fill the dead space and proper padding to the bone stump while preserving the main vascular perforators and pedicles as well as future surgical options.

  5. Which medical device and/or which local treatment for prevention in patients with risk factors for pressure sores in 2012? Developing French guidelines for clinical practice.

    Science.gov (United States)

    Nicolas, B; Moiziard, A S; Barrois, B; Colin, D; Michel, J M; Passadori, Y; Ribinik, P

    2012-10-01

    Implementation of a prevention strategy after the identification of risk factors is essential at the entrance in a care unit or in a medical-social unit. Determine which medical devices and which treatments may be used in order to prevent pressure sore in 2012. Systematic review of the literature using databases: Pascal, Biomed, PubMed, and Cochrane library between 2000 and 2010. Nursing care including use of soft product, non-irritating for the cleaning, hydration of the skin with emollients, protection of fragile skin in case of incontinence by applying a skin protector and application of dressings in front of bony prominences to reduce shear forces, remain valid (level C). Nursing cares and use of dressing in patients with high risks of pressure sores are the responsibility of the nurses. The engagement of health care teams involves screening of risk factors and the knowledge of treatments and local devices. Local preventive treatment in a patient with risk factors of pressure sore is of great interest at entrance in a care unit or in a medical-social unit. Copyright © 2012. Published by Elsevier Masson SAS.

  6. Stakeholders' views of recurrent sore throat, tonsillitis and their management: a qualitative interview study for the NAtional Trial of Tonsillectomy IN Adults (NATTINA Part 1).

    Science.gov (United States)

    McSweeney, L A; Rousseau, N S; Wilson, J A; Wilkes, S; Haighton, C A

    2017-04-01

    To determine the impact of recurrent sore throats and tonsillitis in adults and stakeholder views of treatment pathways. Qualitative semistructured interview design reporting novel data from a feasibility study for a UK national trial of tonsillectomy in adults. Nine study sites linked to ear, nose and throat departments in National Health Service hospitals located across the United Kingdom. Fifteen patients, 11 general practitioners and 22 ear, nose and throat staff consented to in-depth interviews, which were analysed using a framework analysis approach. Views of stakeholder groups. Recurrent sore throats were reported to severely impact patients' family, work and social life. Ear, nose and throat staff stated that patients faced increasing barriers to secondary care service access. General practitioners were under pressure to reduce 'limited clinical value' surgical procedures. The findings from this study suggest that there is a disconnect between the attitudes of the stakeholders and the reality of recurrent sore throat, tonsillectomy procedures and service provision. More evidence for the role of tonsillectomy is needed from randomised controlled trials to determine whether it should continue to be ranked as a procedure of limited clinical effectiveness. © 2016 John Wiley & Sons Ltd.

  7. Bedømmelsesformer inden for AMU

    DEFF Research Database (Denmark)

    Helms, Niels Henrik; Løfgreen, Lars Bo

    Sigtet med denne rapport om bedømmelse i AMU-regi er dels at indsamle dokumentation fra praksiserfaringer baseret på udvalgte TUP-projekter, og dels at beskrive national og international forskning på bedømmelses- og evalueringsområdet. Denne indsamling og beskrivelse vil lægge op til en diskussio...

  8. Bed-levelling experiments with suspended load

    NARCIS (Netherlands)

    Talmon, A.M.; De Graaff, J.

    1991-01-01

    Bed-levelling experiments are conducted in a straight laboratory channel. The experiments involve a significant fraction of suspended sediment transport. The purpose of the experiments is to provide data for modelling of the direction of sediment transport on a transverse sloping alluvial river bed,

  9. Flue Gas Emissions from Fluidized Bed Combustion

    NARCIS (Netherlands)

    Bramer, E.A.; Valk, M.

    1995-01-01

    During the past decades fluidized bed coal combustion was developed as a technology for burning coal in an effective way meeting the standards for pollution control. During the earlier years of research on fluidized bed combustion, the potential for limiting the S02 emission by adding limestone to

  10. Multiphase flow in spout fluidized bed granulators

    NARCIS (Netherlands)

    Buijtenen, van M.S.

    2011-01-01

    Spout fluidized beds are frequently used for the production of granules or particles through granulation, which are widely applied, for example, in the production of detergents, pharmaceuticals, food and fertilizers (M¨orl et al. 2007). Spout fluidized beds have a number of advantageous properties,

  11. 1 The Effect of Camber Bed Drainage

    African Journals Online (AJOL)

    User

    The Effect of Camber Bed Drainage Landforms on Soil. Nutrient Distribution and Grain Yield of Maize on the Vertisols ... The Vertisols of the Accra Plains of Ghana are water logged after significant rainfall ... Excess application of 15-15-15 NPK and sulphate of ammonia fertilizers (150% .... beds, before planting and nutrient.

  12. Print a Bed Bug Card - (Single Cards)

    Science.gov (United States)

    Two sets of business-card-sized lists of tips for recognizing bed bugs and the signs of an infestation, including a photo of bed bugs to assist identification. One card is for general use around home or office, the other for travelers.

  13. Uranium bed oxidation vacuum process system

    International Nuclear Information System (INIS)

    McLeland, H.L.

    1977-01-01

    Deuterium and tritium gases are occluded in uranium powder for release into neutron generator tubes. The uranium powder is contained in stainless steel bottles, termed ''beds.'' If these beds become damaged, the gases must be removed and the uranium oxidized in order not to be flammable before shipment to ERDA disposal grounds. This paper describes the system and methods designed for the controlled degassing and oxidation process. The system utilizes sputter-ion, cryo-sorption and bellows pumps for removing the gases from the heated source bed. Removing the tritium gas is complicated by the shielding effect of helium-3, a byproduct of tritium decay. This effect is minimized by incremental pressure changes, or ''batch'' processing. To prevent runaway exothermic reaction, oxidation of the uranium bed is also done incrementally, or by ''batch'' processing, rather than by continuous flow. The paper discusses in detail the helium-3 shielding effect, leak checks that must be made during processing, bed oxidation, degree of gas depletion, purity of gases sorbed from beds, radioactivity of beds, bed disposal and system renovation

  14. Measurement of the bed material of gravel-bed rivers

    Science.gov (United States)

    Milhous, R.T.; ,

    2002-01-01

    The measurement of the physical properties of a gravel-bed river is important in the calculation of sediment transport and physical habitat values for aquatic animals. These properties are not always easy to measure. One recent report on flushing of fines from the Klamath River did not contain information on one location because the grain size distribution of the armour could not be measured on a dry river bar. The grain size distribution could have been measured using a barrel sampler and converting the measurements to the same as would have been measured if a dry bar existed at the site. In another recent paper the porosity was calculated from an average value relation from the literature. The results of that paper may be sensitive to the actual value of porosity. Using the bulk density sampling technique based on a water displacement process presented in this paper the porosity could have been calculated from the measured bulk density. The principle topics of this paper are the measurement of the size distribution of the armour, and measurement of the porosity of the substrate. The 'standard' method of sampling of the armour is to do a Wolman-type count of the armour on a dry section of the river bed. When a dry bar does not exist the armour in an area of the wet streambed is to sample and the measurements transformed analytically to the same type of results that would have been obtained from the standard Wolman procedure. A comparison of the results for the San Miguel River in Colorado shows significant differences in the median size of the armour. The method use to determine the porosity is not 'high-tech' and there is a need improve knowledge of the porosity because of the importance of porosity in the aquatic ecosystem. The technique is to measure the in-situ volume of a substrate sample by measuring the volume of a frame over the substrate and then repeated the volume measurement after the sample is obtained from within the frame. The difference in the

  15. Serum biochemical activities and muscular soreness in transported goats administered with ascorbic acid during the hot-dry season

    Directory of Open Access Journals (Sweden)

    Ndazo S Minka

    2010-12-01

    Full Text Available The effects of handling, loading and 12 h of road transportation during the hot-dry season on muscular metabolism of 20 experimental goats administered orally with 100 mg/kg body weight of ascorbic acid (AA dissolved in 10 ml of sterile water, and other 20 control goats given equivalent of sterile water 40 min prior to transportation were investigated. The result obtained post-transportation showed that handling, loading and transportation were stressful to the goats, especially the control goats and resulted into muscular damage and the development of delayed-onset-muscular-soreness (DOMS, which may lead to dark-firm-dry (DFD syndrome meat with undesirable effects on its quality. In the experimental goats administered AA such transportation effects were minimal or completely abolished. The result demonstrated that AA reduced the incidence of DOMS and muscular damage in transported goats, therefore it may be used to improve the welfare and quality of meat obtained from goats subjected to long period of road transportation under adverse climatic conditions.

  16. Resting energy expenditure and body composition in bedridden institutionalized elderly women with advanced-stage pressure sores.

    Science.gov (United States)

    Sergi, Giuseppe; Coin, Alessandra; Mulone, Silvana; Castegnaro, Eugenio; Giantin, Valter; Manzato, Enzo; Busetto, Luca; Inelmen, Emine Meral; Marin, Sara; Enzi, Giuliano

    2007-03-01

    Our study investigated nutritional status, body composition, and resting energy expenditure (REE) in elderly patients with advanced-stage pressure sores (PS), in addition to researching any hypermetabolic condition and its relationship with PS size. The study involved 52 institutionalized bedridden elderly women (aged 83.7 +/- 6.3 years), divided into two groups: 23 with advanced-stage (stage 3 and 4) PS and 29 without PS. Albumin, prealbumin, and retinol-binding protein were measured in all patients, and fat-free mass (FFM) and fat mass (FM) were obtained by dual-energy x-ray absorptiometry (DEXA). REE was measured by indirect calorimetry and predicted with the Harris-Benedict formula. PS area and volume were also measured. The elderly women with and without PS were comparable in age, FFM, and FM. Mean albumin, prealbumin, and retinol-binding protein values were lower in cases with PS. Unadjusted mean REE was significantly higher in patients with PS (1212.3 +/- 236.7 vs 1085.5 +/- 161.3 kcal/d; p 110% of the predicted REE, was seen in 74% of patients with PS and 38% of controls. The difference between measured and predicted REE (DeltaREE) correlated with PS volume (r = 0.58; p elderly women are associated with a hypermetabolic state that is influenced by the volume of the PS.

  17. The effects of a repeated bout of eccentric exercise on indices of muscle damage and delayed onset muscle soreness.

    Science.gov (United States)

    Paddon-Jones, D; Muthalib, M; Jenkins, D

    2000-03-01

    This study examined markers of muscle damage following a repeated bout of maximal isokinetic eccentric exercise performed prior to full recovery from a previous bout. Twenty non-resistance trained volunteers were randomly assigned to a control (CON, n=10) or experimental (EXP, n=10) group. Both groups performed 36 maximal isokinetic eccentric contractions of the elbow flexors of the non-dominant arm (ECC1). The EXP group repeated the same eccentric exercise bout two days later (ECC2). Total work and peak eccentric torque were recorded during each set of ECC1 and ECC2. Isometric torque, delayed onset muscle soreness (DOMS), flexed elbow angle and plasma creatine kinase (CK) activity were measured prior to and immediately following ECC1 and ECC2. at 24h intervals for 7 days following ECC1 and finally on day 11. In both groups, all dependent variables changed significantly during the 2 days following ECC1. A further acute post-exercise impairment in isometric torque (30 +/- 5%) and flexed elbow angle (20 +/- 4%) was observed following ECC2 (p0.05). These findings suggest that when maximal isokinetic eccentric exercise is repeated two days after experiencing of contraction-induced muscle damage, the recovery time course is not significantly altered.

  18. Continuous austempering fluidized bed furnace. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, M.N. [Lamar Univ., Beaumont, TX (United States). Dept. of Mechanical Engineering

    1997-09-23

    The intended objective of this project was to show the benefits of using a fluidized bed furnace for austenitizing and austempering of steel castings in a continuous manner. The division of responsibilities was as follows: (1) design of the fluidized bed furnace--Kemp Development Corporation; (2) fabrication of the fluidized bed furnace--Quality Electric Steel, Inc.; (3) procedure for austempering of steel castings, analysis of the results after austempering--Texas A and M University (Texas Engineering Experiment Station). The Department of Energy provided funding to Texas A and M University and Kemp Development Corporation. The responsibility of Quality Electric Steel was to fabricate the fluidized bed, make test castings and perform austempering of the steel castings in the fluidized bed, at their own expense. The project goals had to be reviewed several times due to financial constraints and technical difficulties encountered during the course of the project. The modifications made and the associated events are listed in chronological order.

  19. Does Bedding Affect the Airway and Allergy?

    Directory of Open Access Journals (Sweden)

    RW Siebers

    2011-03-01

    Full Text Available Various cross-sectional and longitudinal studies have suggested that synthetic bedding is associated with asthma, allergic rhinitis and eczema while feather bedding seems to be protective. Synthetic bedding items have higher house dust mite allergen levels than feather bedding items. This is possibly the mechanism involved although fungal and bacterial proinflammatory compounds and volatile organic compounds may play a role. In this review we present and discuss the epidemiological evidence and suggest possible mechanisms. Primary intervention studies are required to show whether feather bedding is protective for the development of childhood asthma and allergic diseases while secondary intervention studies are required to potentially reduce symptoms and medication use in subjects with established disease.

  20. Does bedding affect the airway and allergy?

    Science.gov (United States)

    Siebers, R W; Crane, J

    2011-04-01

    Various cross-sectional and longitudinal studies have suggested that synthetic bedding is associated with asthma, allergic rhinitis and eczema while feather bedding seems to be protective. Synthetic bedding items have higher house dust mite allergen levels than feather bedding items. This is possibly the mechanism involved although fungal and bacterial proinflammatory compounds and volatile organic compounds may play a role. In this review we present and discuss the epidemiological evidence and suggest possible mechanisms. Primary intervention studies are required to show whether feather bedding is protective for the development of childhood asthma and allergic diseases while secondary intervention studies are required to potentially reduce symptoms and medication use in subjects with established disease.

  1. Bed care for patients in palliative settings: considering risks to caregivers and bed surfaces.

    Science.gov (United States)

    Fragala, Guy

    2015-02-01

    Ensuring patients are comfortable in bed is key to effective palliative care, but when moving and positioning patients in bed, health professionals face an occupational risk of injury. The turning and positioning (TAP) system is a new method of moving patients in bed, that evidence has shown to reduce the risk of injury to caregivers. Providing the correct bed surface is another aspect of bed care essential to the comfort of the palliative patient, and to aid wound prevention and treatment. It is important to take a patient-centred approach when considering the most appropriate bed surface patients. This article provides an overview and discussion of these two aspects of bed care for palliative patients.

  2. A β-cyclodextrin, polyethyleneimine and silk fibroin hydrogel containing Centella asiatica extract and hydrocortisone acetate: releasing properties and in vivo efficacy for healing of pressure sores.

    Science.gov (United States)

    Lee, M S; Seo, S R; Kim, J-C

    2012-10-01

      Pressure sores are lesions caused by impaired blood flow. Conventional dressings can absorb exudates, but do not promote wound healing. A hydrogel composed of β-cyclodextrin (β-CD), polyethyleneimine (PEI) and silk fibroin (SF) was assessed for use in healing of pressure sores. The hydrogel was prepared by crosslinking β-CD-grafted PEI and SF using epichlorohydrin. The gel was then immersed in an aqueous solution of Centella asiatica extract (CAE) 0.7 mg/mL and/or hydrocortisone acetate (HCA) 0.5 mg/mL. The in vivo pressure sore-healing efficacy of the dry gel (with or without the drugs) was investigated in terms of the hyperplasia of epidermis and the number of neutrophils in the skin tissue. The specific loading of CAE was 0.0091 g/g of dry gel. The percentage of CAE released at 24 h at pH 3.0, 5.0 and 7.4 was approximately 63.9%, 55.0% and 44.4%, respectively. This pH-dependent release is possibly due to the degree of gel swelling, which decreased with increasing pH. The specific loading of HCA was 0.0050 g/g dry gel, and the percentage release of HCA at 24 h was around 20% at all three pH points. It is likely that HCA release is independent of pH. HCA is a hydrophobic compound, and therefore the release of HCA is affected by the partitioning of HCA between the β-CD cavity and the bulk water phase, but not by the degree of swelling of the hydrogel. The pressure sores treated with the hydrogel healed in 6 days, compared with 10 days for controls. In this study, a β-CD/PEI/SF hydrogel containing CAE and HCA reduced the healing time for pressure sores. © The Author(s). CED © 2012 British Association of Dermatologists.

  3. Tests of Bed Agglomeration Tendency Using a Rotating Furnace; Roterugn foer bedoemning av sintringsbenaegenhet

    Energy Technology Data Exchange (ETDEWEB)

    Larfeldt, Jenny; Zintl, Frank [TPS Termiska Processer AB, Nykoeping (Sweden)

    2003-08-01

    Bed sintering is a well known problem in fluidised bed boilers. In order to avoid bed sintering the bed material turn over ratio is high which leads a high consumption of bed material. This work aims at developing and evaluating a method for testing the bed agglomeration tendency of a FB bed material by using a rotating furnace. A rotating furnace has been designed and tests have shown that three temperatures describing the increasing agglomeration tendency can be evaluated; TA when several particles stick to each other and to the crucible wall, TB when half of the material sticks to the wall and TC when almost all the material forms a ball in the crucible. Comparison with bed agglomeration tests has shown that TA is between 80 deg C to 130 deg C lower than the bed agglomeration temperature from fluid bed tests. It is shown that TB is closer to the bed agglomeration temperature and finally that the temperature TC is higher than the bed agglomeration temperature. It is concluded that in the rotating furnace sticking of particles is visualised early, and that this sticking will not cause defluidisation of the bed until more than half of the material in the crucible is sticky. Repeated tests has been performed at a heating rate of 5 deg/minute and a rotating speed of 12 rpm and a furnace inclination of 20 deg was found to give distinct results in the evaluation. The evaluation has shown to be reproducible at lower temperatures. At higher temperatures, around 1,000 deg C, the evaluation was complicated by a poor picture quality which probably can be improved by proper cooling of the camera. It has also been shown that sticking of material in the rotating furnace could be detected at relatively low temperatures of 750 deg C that disappeared at higher temperatures. This is likely to be explained by melting salts that evaporates as temperature increase. At even higher temperatures the sticking reappeared until a ball was formed in the crucible. The latter sticking is

  4. Varicose and other vein problems - self-care

    Science.gov (United States)

    ... neomycin Drying lotions, such as calamine Lanolin, a natural moisturizer Benzocaine or other creams that numb the skin Watch for skin sores on your leg, mainly around your ankle. Take care of sores right away to prevent infection. When ...

  5. Effects of setting new source performance standards for fluidized-bed combustion systems

    Energy Technology Data Exchange (ETDEWEB)

    1978-02-01

    This study was undertaken for the US Environmental Protection Agency to examine the potential consequences of revisions in New Source Performance Standards (NSPS) on fluidized-bed combustor-based steam electric generators of greater than 250,000,000 Btu. A study of the appropriateness and differential effects of alternate regulatory approaches to the standards-setting process was made. Problems dealing with an emerging technology such as fluidized-bed combustion were emphasized. Finally, an examination was made of the potential benefits of fluidized-bed combustion (FBC) systems relative to conventional coal-fired systems equipped with scrubbers. Information is included on the relative advantages and disadvantages of utility-sized fluidized-bed combustors, the technical consequences of NSPS alternatives, policy implications concerning NSPS for steam-electric generators, and cost models for atmospheric and pressurized FBC systems. (LCL)

  6. Experimental investigation on the changes in bed properties of a ...

    African Journals Online (AJOL)

    Experimental investigation on the changes in bed properties of a downdraft ... pressure measurements, physical observation, sampling of bed particles, bed agitation, etc. The generated producer gas was cleaned and cooled in downstream ...

  7. The rationale for sitting elderly patients in hospital out of bed for long periods is medically unsubstantiated and detrimental to their recovery.

    Science.gov (United States)

    Bliss, Mary Rose

    2004-01-01

    The notorious statement by Asher about the dangers of bed rest [Brit Med J 1947; ii: 967-8] which continues to be quoted out of context in leading medical journals today is inapplicable to modern short stay elderly hospital patients and has little medical foundation. 'Blood clotting in the veins' is more likely to result from venous stasis during sitting than from lying down. 'Lime draining from the bones' refers to subjects' spending weeks, not hours, in the horizontal position and similar losses have been shown to occur in healthy people immobilised in chairs for long periods during the day. Constipation is common in sick old people and there is no evidence that 'scybala stacking up the colon' is more likely to occur in bed than in a chair. The 'flesh rotting from the seat', or pressure sores, occur as frequently or more frequently, in sick patients nursed in chairs as in bed. 'Urine leaking from the distended bladder' may be reduced in very debilitated old people sitting in chairs, but at the expense of impaired renal function associated with reduced perfusion in the upright posture and exacerbated incontinence due to a compensatory diuresis at night. The 'spirit evaporating from the soul' today is more likely to afflict old patients who are exhausted by prolonged chair nursing and orthostatic hypotension due to age or illness. Recent studies in intensive care patients have highlighted the hypotension due to vasodilatation which can occur in infection and trauma. There is no evidence that nosocomial pneumonia is reduced by sitting patients out of bed, and lack of sleep is likely to exacerbate infection and delay recovery. Preventing patients from lying down when they feel the need is a violation of their rights and has been shown to be probably as injurious as the Victorian practice of preventing healthy patients from getting up. Physiotherapy is obviously important but patients should be allowed to decide for themselves how long they spend in or out of bed.

  8. A mathematical model for supplying air-cooling for a building using a packed bed

    Energy Technology Data Exchange (ETDEWEB)

    Marewo, G.T. [Zimbabwe Univ., Mathematics Dept., Harare (Zimbabwe); Henwood, D.J. [School of Computing and Mathematical Sciences, Brighton (United Kingdom)

    2006-01-15

    The cooling system at the Harare International School uses a packed bed system for storing the coldness of the night-time to be used later for day-time air-conditioning. A two-phase mathematical model is described for the packed bed which includes heat dispersion in the fluid, and heat loss to the environment. This is in contrast to other studies, where at least one of these terms is neglected to simplify the mathematical model. A numerical method for obtaining a solution is proposed and implemented. Using measured inlet temperatures, the measured and predicted outlet temperatures of the bed show good trend agreement. The differences in detail are examined through sensitivity analyses for both the heat convection transfer and air velocity. It is apparent that adjusting these parameters can increase the agreement between the predicted and measured data. A parametric study for heat storage with various materials and bed sizes is given, which indicates how the code may be used as a tool for improving design and operational parameters. Practical application: A mathematical model of a packed bed is described; the bed is made up of fluid flowing over solid material with heat interchange between the two. The solid material is idealized as spheres and the fluid temperature is assumed uniform in a cross-section of the bed. The model includes heat interchange between the bed and its surrounding environment and allows for time varying fluid velocity. The input data is the inlet temperature to the bed, which may be measured. The comparison with measured data may be helpful to anyone attempting to develop and test a similar model. The sensitivity tests give an understanding of the significance of some of the parameters involved. The Appendix gives a mathematical statement of the problem and an outline of an approach to developing computer code for a numerical solution. (Author)

  9. Coating and melt induced agglomeration in a poultry litter fired fluidized bed combustor

    International Nuclear Information System (INIS)

    Billen, Pieter; Creemers, Benji; Costa, José; Van Caneghem, Jo; Vandecasteele, Carlo

    2014-01-01

    The combustion of poultry litter, which is rich in phosphorus, in a fluidized bed combustor (FBC) is associated with agglomeration problems, which can lead to bed defluidization and consequent shutdown of the installation. Whereas earlier research indicated coating induced agglomeration as the dominant mechanism for bed material agglomeration, it is shown experimentally in this paper that both coating and melt induced agglomeration occur. Coating induced agglomeration mainly takes place at the walls of the FBC, in the freeboard above the fluidized bed, where at the prevailing temperature the bed particles are partially molten and hence agglomerate. In the ash, P 2 O 5 forms together with CaO thermodynamically stable Ca 3 (PO 4 ) 2 , thus reducing the amount of calcium silicates in the ash. This results in K/Ca silicate mixtures with lower melting points. On the other hand, in-bed agglomeration is caused by thermodynamically unstable, low melting HPO 4 2− and H 2 PO 4 − salts present in the fuel. In the hot FBC these salts may melt, may cause bed particles to stick together and may subsequently react with Ca salts from the bed ash, forming a solid bridge of the stable Ca 3 (PO 4 ) 2 between multiple particles. - Highlights: • Coating induced agglomeration not due to K phosphates, but due to K silicates. • Melt induced agglomeration due to H 2 PO 4 − and HPO 4 2− salts in the fuel. • Wall agglomeration corresponds to coating induced mechanism. • In-bed agglomeration corresponds to melt induced mechanism

  10. Wear oxidation of evaporator coils in fluidised bed captive power plants

    International Nuclear Information System (INIS)

    Ghosal, S.K.; De, P.K.

    2000-01-01

    Combustion of pulverised coal or gas to form steam in thermal power plants is a common practice. Corrosion of water-wall, superheater and reheater tubes is the typical problem faced in these power plants. Modification of process conditions, redesigning of equipment and selection of more corrosion resistant materials are few methods which have been tried to combat corrosion to a certain extent. Restricted heat transfer efficiency is another problem associated with these power plants. In order to bring upon improvements, fluidized bed combustors are being used in some advanced thermal power plants at present because of excellent combustion and heat transfer efficiencies. Even with low grade coals, higher combustion efficiency could be achieved in these combustors due to excellent gas/solid chemical reactivity at relatively low reaction temperatures. Further improvements in in-bed heat transfer and bed temperature uniformity have been possible with the use of sand in bed. However, erosion, corrosion and combined erosion/corrosion are some of the major modes of material degradation associated with these fluidized bed combustors using sand. Recently in a captive power unit using bubbling fluidized bed combustors containing sand, evaporator coils made of carbon steel were seen to be severely affected by erosion corrosion. The directional nature of metal removal from the studs, tube OD and ultimately the rupture of the thinned tube wall confirmed the above observation. Microstructural examinations showed loss of carbon at certain places including those near the leaked/punctured regions at the prevailing bed temperature of 850 deg C. This paper describes the detailed investigations carried out on wear oxidation phenomenon occurred in a captive thermal power plant using advanced bubbling fluidized bed combustors. (author)

  11. Research and application of packing density for pebble bed in HTR

    International Nuclear Information System (INIS)

    Yu Fujiang; Xie Fei; Sun Ximing

    2015-01-01

    The pebble bed high temperature gas-cooled reactor is one of the major types of reactors developed by Chinese nuclear technology. The statistical analysis for packing density in the pebble bed is an important issue of physical-thermal calculation and safety analysis. Aimed to this problem, a new kind of method was set up to solve this problem. Compared with the traditional lattice-fill method and the experiment, its efficiency and accuracy were verified, while helping to find out the best length of unit in the traditional lattice-fill method. This method was used to analyze the boundary effects observed by experiments. (authors)

  12. Improvement of Combustion Characteristics in Fluidized Bed

    International Nuclear Information System (INIS)

    Mohamed, H.S.; El Sourougy, M.R.; Faik, M.

    2009-01-01

    The present investigation is directed towards the experimental study of the effect of a new design of the bed temperature on the overall thermal efficiency and heat transfer by conduction, convection and radiation in gaseous fuel-fluidized bed combustion system. The experiments are performed on a water-cooled fluidized bed model furnace with cylindrical cross-section of 0.25 m diameter and its height is 0.60 m. the fluidising medium used is sand particles with average diameter 1.5 mm. The bed temperature is varied between 700 degree C and 1100 degree C. Measurements f carbon dioxide, carbon monoxide and oxygen concentrations are carried out by using water-cooled sampling probe, and infrared and paramagnetic analyzers. The results obtained show that the bed temperature, the total heat transfer to the wall and the bed combustion efficiency increase with the decrease of the air-fuel ratio. It is also found that 91% of the total heat transfer is in the fluidising part of the bed and most of this heat is transferred by convection from hot sand particles to the wall. Two empirical formulae for the calculation of the wall heat transfer coefficient and the particle convective heat transfer coefficient are proposed. A verification of the proposed empirical formulae is made by comparing the calculated values with the experimental results.

  13. Condensation in Nanoporous Packed Beds.

    Science.gov (United States)

    Ally, Javed; Molla, Shahnawaz; Mostowfi, Farshid

    2016-05-10

    In materials with tiny, nanometer-scale pores, liquid condensation is shifted from the bulk saturation pressure observed at larger scales. This effect is called capillary condensation and can block pores, which has major consequences in hydrocarbon production, as well as in fuel cells, catalysis, and powder adhesion. In this study, high pressure nanofluidic condensation studies are performed using propane and carbon dioxide in a colloidal crystal packed bed. Direct visualization allows the extent of condensation to be observed, as well as inference of the pore geometry from Bragg diffraction. We show experimentally that capillary condensation depends on pore geometry and wettability because these factors determine the shape of the menisci that coalesce when pore filling occurs, contrary to the typical assumption that all pore structures can be modeled as cylindrical and perfectly wetting. We also observe capillary condensation at higher pressures than has been done previously, which is important because many applications involving this phenomenon occur well above atmospheric pressure, and there is little, if any, experimental validation of capillary condensation at such pressures, particularly with direct visualization.

  14. Fluidized bed combustion with the use of Greek solid fuels

    Directory of Open Access Journals (Sweden)

    Kakaras Emmanuel

    2003-01-01

    Full Text Available The paper is an overview of the results obtained up to date from the combustion and co-combustion activities with Greek brown coal in different installations, both in semi-industrial and laboratory scale. Combustion tests with Greek lignite were realized in three different Circulating Fluidized Bed Combustion (CFBC facilities. Low rank lignite was burned in a pilot scale facility of approx. 100kW thermal capacity, located in Athens (NTUA and a semi-industrial scale of 1.2 MW thermal capacity, located at RWE's power station Niederaussem in Germany. Co-combustion tests with Greek xylitic lignite and waste wood were carried out in the 1 MWth CFBC installation of AE&E, in Austria. Lab-scale co-combustion tests of Greek pre-dried lignite with biomass were accomplished in a bubbling fluidized bed in order to investigate ash melting problems. The obtained results of all aforementioned activities showed that fluidized bed is the appropriate combustion technology to efficiently exploit the low quality Greek brown coal either alone or in conjunction with biomass species.

  15. Fluidised-bed combustion of gasification residue

    Energy Technology Data Exchange (ETDEWEB)

    Korpela, T.; Kudjoi, A.; Hippinen, I.; Heinolainen, A.; Suominen, M.; Lu Yong [Helsinki Univ. of Technology (Finland). Lab of Energy Economics and Power Plant Engineering

    1996-12-01

    Partial gasification processes have been presented as possibilities for future power production. In the processes, the solid materials removed from a gasifier (i.e. fly ash and bed material) contain unburnt fuel and the fuel conversion is increased by burning this gasification residue either in an atmospheric or a pressurised fluidised-bed. In this project, which is a part of European JOULE 2 EXTENSION research programme, the main research objectives are the behaviour of calcium and sulphur compounds in solids and the emissions of sulphur dioxide and nitrogen oxides (NO{sub x} and N{sub 2}O) in pressurised fluidised-bed combustion of gasification residues. (author)

  16. Recent advances in fluidized bed drying

    Science.gov (United States)

    Haron, N. S.; Zakaria, J. H.; Mohideen Batcha, M. F.

    2017-09-01

    Fluidized bed drying are very well known to yield high heat and mass transfer and hence adopted to many industrial drying processes particularly agricultural products. In this paper, recent advances in fluidized bed drying were reviewed and focus is given to the drying related to the usage of Computational Fluid Dynamics (CFD). It can be seen that usage of modern computational tools such as CFD helps to optimize the fluidized bed dryer design and operation for lower energy consumption and thus better thermal efficiency. Among agricultural products that were reviewed in this paper were oil palm frond, wheat grains, olive pomace, coconut, pepper corn and millet.

  17. [Pressure sores secondary to immobilization with cervical collar: a complication of acute cervical injury].

    Science.gov (United States)

    Molano Alvarez, Esteban; Murillo Pérez, María del Ara; Salobral Villegas, María Teresa; Domínguez Caballero, Mireia; Cuenca Solanas, Manuela; García Fuentes, Carlos

    2004-01-01

    Cervical collars are essential in the treatment of patients with suspicion or verification of acute cervical spine injury (ACSI). One of the complications of these devices is the development of pressure scores (PS). This study aims to determine its incidence in our unit, the characteristics of patients with ACSI who suffer PS due to the collar and to describe aspects related with these injuries. We include 92 patients with ACSI hospitalized more than 24 hours from January 2002 to December 2003. We analyze demographic variables, incidence, risk factors and characteristics of the PS that develop. The incidence of these lesions was 23.9%. Patients with PS presented: a higher injury severity score (ISS) (37.5 9.8 vs. 31.3 14.9), a greater percentage of catheter carriers of intracraneal pressure (ICP) (55.6% vs. 16.2%), longer time of mechanical ventilation (15.4 8.2 vs. 6.1 9) and longer stays (24.6 10.9 vs. 10 10.3), all statistically significant (pACSI, elevated ISS, monitoring of ICP, mechanical ventilation and prolonged stays is required. The occipital zone requires special attention due to the seriousness of the injuries recorded. We suggest a specific multidisciplinary protocol for this problem.

  18. Attempts on cardoon gasification in two different circulating fluidized beds

    Directory of Open Access Journals (Sweden)

    Chr. Christodoulou

    2014-11-01

    Full Text Available Few tests have been carried out in order to evaluate the use of cardoon in gasification and combustion applications most of the researchers dealt with agglomeration problems. The aim of this work is to deal with the agglomeration problem and to present a solution for the utilization of this biofuel at a near industrial application scale. For this reason, two experiments were conducted, one in TU Delft and one in Centre for Research and Technology Hellas (CERTH, using fuel cardoon and 50% w/w cardoon blended with 50% w/w giant reed respectively. Both experimental campaigns were carried out in similar atmospheric circulating fluidized bed gasifiers. Apart from the feedstock, the other differences were the gasification medium and the bed material used in each trial. The oxidizing agent at TUD׳s run was O2/steam, whereas CERTH׳s tests used air. When experiments with the cardoon 50% w/w–giant reed 50% w/w blend were performed no agglomeration problems were presented. Consequently, gasification could be achieved in higher temperature than that of pure cardoon which led to the reduction of tar concentration.

  19. Study on transient of fluidized bed nuclear reactor

    International Nuclear Information System (INIS)

    Streck, E.E.

    1988-01-01

    The point kinetic equations for a Fluidized-Bed Nuclear Reactor are solved by the method of Hansen. Due to the time varying nature of the reactor volume, the equations have a non-conventional formulation (moving boundary problem), but the method of solution preserves its asymptotic convergence and efficiency characteristics under this formulation. A one dimensional and linearized thermal hydraulics feedback model was coupled to the point kinetic equations in order to obtain a more realistic representation of the reactor power. The resulting equations are solved by the Euler explicit method. (author)

  20. A 350 MW HTR with an annular pebble bed core

    International Nuclear Information System (INIS)

    Wang Dazhong; Jiang Zhiqiang; Gao Zuying; Xu Yuanhui

    1992-12-01

    A conceptual design of HTR-module with an annular pebble bed core was proposed. This design can increase the unit power capacity of HTR-Module from 200 MWt to 350 MWt while it can keep the inherent safety characteristics of modular reactor. The preliminary safety analysis results for 350 MW HTR are given. In order to solve the problem of uneven helium outlet temperature distribution a gas flow mixing structure at bottom of core was designed. The experiment results of a gas mixing simulation test rig show that the mixing function can satisfy the design requirements

  1. The Kaldnes Moving Bed biofilm technology for treatment of industrial wastewater; Tecnologia Kaldnes Moving Bed biofilm (KMT) para la depuracion de aguas residuales industriales

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, V.; Garcia Carrion, M.; Farre Solsona, C.

    2004-07-01

    The Kaldnes Moving bed biofilm technology is a biofilm process which is very suitable for treatment of industrial wastewaters. Biofilm processes have several acknowledged advantages compared to suspended biomass processes, e. g. resistance to toxicity and load variations. Traditionally biofilm processes have been known to clog at high loads and hence have not been suited for industrial effluents: however, the Kaldnes Moving Bed biofilm process has overcome this problem. This article describes how the process has been used as pre-treatment up front of activated sludge at a dairy in USA, and as sole treatment at pharmaceutical industry in Sweden. (Author)

  2. Thermo-catalytic pyrolysis of waste polyethylene bottles in a packed bed reactor with different bed materials and catalysts

    International Nuclear Information System (INIS)

    Obeid, Farah; Zeaiter, Joseph; Al-Muhtaseb, Ala’a H.; Bouhadir, Kamal

    2014-01-01

    Highlights: • Thermo-catalytic pyrolysis of waste polyethylene bottles was investigated. • The highest yield of liquid (82%) was obtained over a cement powder bed. • Acidic catalysts narrowed the carbon chain length of the paraffins to C 10 –C 28 . • Combination of cement bed with HBeta catalyst gave the highest yield of liquid. • Significant yield of aromatics was obtained mainly naphthalene and D-limonene. - Abstract: Plastic waste is an increasing economic and environmental problem as such there is a great need to process this waste and reduce its environmental impact. In this work, the pyrolysis of high density polyethylene (HDPE) waste products was investigated using both thermal and catalytic cracking techniques. The experimental work was carried out using packed bed reactor operating under an inert atmosphere at 450 °C. Different reactor bed materials, including sand, cement and white clay were used to enhance the thermal cracking of HDPE. In addition, the catalytic effect of sodium hydroxide, HUSY and HBeta zeolite catalysts on the degradation of HDPE waste was also investigated. The reactor beds were found to significantly alter the yield as well as the product composition. Products such as paraffins (⩽C 44 ), olefins (⩽C 22 ), aromatics (⩽C 14 ) and alcohols (C 16 and C 17 ) were obtained at varying rates. The highest yield of liquid (82%) was obtained over a cement powder bed with a paraffin yield of 58%. The yield of paraffins and olefins followed separate paths, for paraffins it was found to increase in the order or Cement > White clay > Silica Sand, whereas for the olefins it was in the reverse order Silica Sand > White clay > Cement. The results obtained in this work exhibited a higher P/O ratio than expected, where the amount of generated paraffins was greater than 60% in most cases. Less olefin was generated as a consequence. This indicates that the product generated is more suited to be used as a fuel rather than as a chemical

  3. The Effect of Zinc Lozenge on Postoperative Sore Throat: A Prospective Randomized, Double-Blinded, Placebo-Controlled Study.

    Science.gov (United States)

    Farhang, Borzoo; Grondin, Lydia

    2018-01-01

    Postoperative sore throat (POST) is commonly seen after endotracheal intubation, and oral zinc prevents oral mucositis associated with chemotherapy. This study is designed to evaluate the effects of administration of zinc lozenges on POST. Seventy-nine patients undergoing low- or moderate-risk surgery with endotracheal intubation were randomly assigned into 2 groups: Control group received placebo and zinc group received 40-mg zinc lozenges 30 minutes preoperatively. Patients were assessed for incidence and severity (4-point scale, 0-3) of POST at 0, 2, 4, and 24 hours postoperatively. The primary outcome was incidence of POST at 4 hours after surgery. The secondary outcomes were the incidence of POST at 0, 2, and 24 hours and the severity of POST. At 4 hours, there was a significantly lower incidence of POST in the zinc group, 7%, than the control group, 29% (P = .046). The incidence of POST at 0 hour was 0% in zinc group and 24% in control group (P = .004). The highest incidence of POST occurred at the second hour after surgery, with the rate of 10% in the zinc group and 34% in the control group (P = .0495). The incidence of POST at 24 hours was 13% in zinc group and 24% in control group (not significant). The severity of POST was significantly lower in the zinc group for mild (P = .003) and moderate (P = .004) POST. The administration of a single dose of 40-mg zinc lozenge 30 minutes preoperatively is effective to reduce both incidence of POST in the first 4 hours and severity of mild and moderate POST in the immediate postoperative period.

  4. Bed Bug Infestations and Control Practices in China: Implications for Fighting the Global Bed Bug Resurgence

    Directory of Open Access Journals (Sweden)

    Changlu Wang

    2011-04-01

    Full Text Available The bed bug resurgence in North America, Europe, and Australia has elicited interest in investigating the causes of the widespread and increasing infestations and in developing more effective control strategies. In order to extend global perspectives on bed bug management, we reviewed bed bug literature in China by searching five Chinese language electronic databases. We also conducted telephone interviews of 68 pest control firms in two cities during March 2011. In addition, we conducted telephone interviews to 68 pest control companies within two cities in March 2011. Two species of bed bugs (Cimex lectularius L. and Cimex hemipterus (F. are known to occur in China. These were common urban pests before the early1980s. Nationwide “Four-Pest Elimination” campaigns (bed bugs being one of the targeted pests were implemented in China from 1960 to the early 1980s. These campaigns succeeded in the elimination of bed bug infestations in most communities. Commonly used bed bug control methods included applications of hot water, sealing of bed bug harborages, physical removal, and applications of residual insecticides (mainly organophosphate sprays or dusts. Although international and domestic travel has increased rapidly in China over the past decade (2000–2010, there have only been sporadic new infestations reported in recent years. During 1999–2009, all documented bed bug infestations were found in group living facilities (military dormitories, worker dormitories, and prisons, hotels, or trains. One city (Shenzhen city near Hong Kong experienced significantly higher number of bed bug infestations. This city is characterized by a high concentration of migratory factory workers. Current bed bug control practices include educating residents, washing, reducing clutter, putting items under the hot sun in summer, and applying insecticides (pyrethroids or organophosphates. There have not been any studies or reports on bed bug insecticide

  5. Evaluation of a clay-based acidic bedding conditioner for dairy cattle bedding.

    Science.gov (United States)

    Proietto, R L; Hinckley, L S; Fox, L K; Andrew, S M

    2013-02-01

    This study investigated the effects of a clay-based acidic bedding conditioner on sawdust bedding pH, dry matter (DM), environmental pathogen counts, and environmental bacterial counts on teat ends of lactating dairy cows. Sixteen lactating Holstein cows were paired based on parity, days in milk, milk yield, and milk somatic cell count, and were negative for the presence of an intramammary pathogen. Within each pair, cows were randomly assigned to 1 of 2 treatments with 3-wk periods in a crossover design. Treatment groups consisted of 9 freestalls per group bedded with either untreated sawdust or sawdust with a clay-based acidic bedding conditioner, added at 3- to 4-d intervals over each 21-d period. Bedding and teat ends were aseptically sampled on d 0, 1, 2, 7, 14, and 21 for determination of environmental bacterial counts. At the same time points, bedding was sampled for DM and pH determination. The bacteria identified in the bedding material were total gram-negative bacteria, Streptococcus spp., and coliform bacteria. The bacteria identified on the teat ends were Streptococcus spp., coliform bacteria, and Klebsiella spp. Teat end score, milk somatic cell count, and intramammary pathogen presence were measured weekly. Bedding and teat cleanliness, environmental high and low temperatures, and dew point data were collected daily. The bedding conditioner reduced the pH, but not the DM, of the sawdust bedding compared with untreated sawdust. Overall environmental bacterial counts in bedding were lower for treated sawdust. Total bacterial counts in bedding and on teat ends increased with time over both periods. Compared with untreated sawdust, the treated bedding had lower counts of total gram-negative bacteria and streptococci, but not coliform counts. Teat end bacterial counts were lower for cows bedded on treated sawdust for streptococci, coliforms, and Klebsiella spp. compared with cows bedded on untreated sawdust. The clay-based acidic bedding conditioner

  6. Method of working thick beds

    Energy Technology Data Exchange (ETDEWEB)

    Giezynski, A; Bialasik, A; Krawiec, A; Wylenzek, A

    1981-12-30

    The patented method of working thick coal beds in layers consists of creating in the collapsed rocks or from the fill material a bearing rock plate by strengthening these rocks with a hardening composition made of wastes of raw material, resin and water injected into the rock through wells. The difference in the suggestion is that through boreholes drilled in the lower part of the rock roofing on a previously calculated network, a solution is regularly injected which consists of dust wastes obtained in electric filters during production of clinker from mineral raw material in a quantity of 60-70% by volume, wastes of open-hearth production in a quantity of 15-20% and natural sand in a quantity of 15-20%, and water in a quantity of 35-55% of the volume of mineral components. In the second variant, the injected compostion contains: wastes from production of clinker 55-57%, open-hearth wastes 20-23%, natural sand 12-14%, asbestos fine particles 7-8% and water 38-45% of the volume of mineral components. In addition, the difference is that in the boreholes drilled in the coal block directly under the roofing, a composition is injected which consists of natural sand and catalyst in the form of powder and individually supplied liquid synthetic resin in a quantity of 3-5% by weight in relation to the sand. The hardening time with normal temperature is 1-1.5 h, after which strength is reached of 80 kg-f/cm/sup 2/.

  7. Fluidized-bed firing of washery wastes

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, Yu M; Gavrik, M V

    1978-01-01

    Tailings containing SiO2 (56.76%), A12O3 (25.63%), Fe2O3 (10.22%) plus CaO, MgO and SOat3 were fluidized at 1.7-2.0 m/s. This gives a uniform pressure of 6 kg-f/m2 at bed heights of 100 mm, though this is higher in the upper layers where the fine material tends to concentrate. The resistance of the bed is directly proportional to its height. Minimum oxygen, maximum carbon dioxide and maximum temperature are found in the section 250-300 mm above the grid (bed height 500 mm); in the upper zone of the bed, some decrease in temperature and carbon dioxide, and increase in oxygen are associated with the ingress of air through the discharge chute. Waste heat should be utilised to help to cover costs of desulphurising stack gases.

  8. Medications to Treat Bed-Wetting

    Science.gov (United States)

    ... suggest that depression plays a role in the cause of bed-wetting. This type of drug is thought to work one of several ways: by changing the child's sleep and wakening pattern by affecting the time ...

  9. Bed Bug Clearinghouse by Type of Resource

    Science.gov (United States)

    This information is to help states, communities, and consumers prevent and control bed bug infestations. These brochures, fact sheets, manuals, posters, checklists, videos, and more provide guidance such as hotel room inspection and pesticide safety.

  10. Bed Bugs are Public Health Pests

    Science.gov (United States)

    EPA and the Centers for Disease Control and Prevention (CDC) issued a joint statement on the public health impacts of bed bugs, which are blood-sucking ectoparasites (external parasites). EPA also has a pesticide registration notice on this topic.

  11. The effect of vibration on bed voidage behaviors in fluidized beds with large particles

    Directory of Open Access Journals (Sweden)

    H. Jin

    2007-09-01

    Full Text Available The effects of vibration parameters, operating conditions and material properties on bed voidage were investigated using an optical fiber probe approach in a vibrating fluidized bed with a diameter of 148 mm. Variables studied included frequency (0-282 s-1, amplitude (0 mm-1 mm, bed height (0.1 m-0.4 m as well as four kinds of particles (belonging to Geldart's B and D groups. The axial and radial voidage distribution with vibration is compared with that without vibration, which shows vibration can aid in the fluidization behaviors of particles. For a larger vibration amplitude, the vibration seriously affects bed voidage. The vibration energy can damp out for particle layers with increasing the bed height. According to analysis of experimental data, an empirical correlation for predicting bed voidage, giving good agreement with the experimental data and a deviation within ±15%, was proposed.

  12. Coolability of volumetrically heated particle beds

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, Muhammad

    2017-03-22

    In case of a severe nuclear reactor accident, with loss of coolant, a particle bed may be formed from the fragmentation of the molten core in the residual water at different stages of the accident. To avoid further propagation of the accident and maintain the integrity of the reactor pressure vessel, the decay heat of the particle bed must be removed. To better understand the various thermo-hydraulic processes within such heat-generating particle beds, the existing DEBRIS test facility at IKE has been modified to be able to perform novel boiling, dryout and quenching experiments. The essential experimental data includes the pressure gradients measured by 8 differential pressure transducers along the bed height as a function of liquid and vapour superficial velocities, the determination of local dryout heat fluxes for different system pressures as well as the local temperature distribution measured by a set of 51 thermocouples installed inside the particle bed. The experiments were carried out for two different particle beds: a polydispersed particle bed which consisted of stainless steel balls (2 mm, 3 mm and 6 mm diameters) and an irregular particle bed which consisted of a mixture of steel balls (3 mm and 6 mm) and irregularly shaped Al{sub 2}O{sub 3} particles. Additionally, all experiments were carried out for different flow conditions, such as the reference case of passive 1D top-flooding, 1D bottom flooding (driven by external pumps and different downcomer configurations) and 2D top-/bottom-/lateral flooding with a perforated downcomer. In this work, it has been observed that for both particle beds with downcomer configurations an open downcomer leads to the best coolability (dryout heat flux = 1560 kW/m{sup 2}, polydispersed particle bed, psys = 1 bar) of the particle bed, mainly due to bottom-flow with enhanced natural convection. It has also been shown that a potential lateral flow via a perforation of the downcomer does not bring any further improvements

  13. Coolability of volumetrically heated particle beds

    International Nuclear Information System (INIS)

    Rashid, Muhammad

    2017-01-01

    In case of a severe nuclear reactor accident, with loss of coolant, a particle bed may be formed from the fragmentation of the molten core in the residual water at different stages of the accident. To avoid further propagation of the accident and maintain the integrity of the reactor pressure vessel, the decay heat of the particle bed must be removed. To better understand the various thermo-hydraulic processes within such heat-generating particle beds, the existing DEBRIS test facility at IKE has been modified to be able to perform novel boiling, dryout and quenching experiments. The essential experimental data includes the pressure gradients measured by 8 differential pressure transducers along the bed height as a function of liquid and vapour superficial velocities, the determination of local dryout heat fluxes for different system pressures as well as the local temperature distribution measured by a set of 51 thermocouples installed inside the particle bed. The experiments were carried out for two different particle beds: a polydispersed particle bed which consisted of stainless steel balls (2 mm, 3 mm and 6 mm diameters) and an irregular particle bed which consisted of a mixture of steel balls (3 mm and 6 mm) and irregularly shaped Al 2 O 3 particles. Additionally, all experiments were carried out for different flow conditions, such as the reference case of passive 1D top-flooding, 1D bottom flooding (driven by external pumps and different downcomer configurations) and 2D top-/bottom-/lateral flooding with a perforated downcomer. In this work, it has been observed that for both particle beds with downcomer configurations an open downcomer leads to the best coolability (dryout heat flux = 1560 kW/m 2 , polydispersed particle bed, psys = 1 bar) of the particle bed, mainly due to bottom-flow with enhanced natural convection. It has also been shown that a potential lateral flow via a perforation of the downcomer does not bring any further improvements in

  14. Uranium storage bed accident hazards evaluation

    International Nuclear Information System (INIS)

    Longhurst, G.R.; Shmayda, W.T.

    1989-01-01

    To properly assess hazards and risks associated with the use of uranium beds as tritium storage devices in fusion reactor systems, it is necessary to understand the consequences occurring in the event of an accident. Accidents involving uranium beds are postulated, and the possible results are considered. A research program to more fully and accurately understand those results has been initiated involving the Idaho National Engineering Laboratory and Ontario Hydro. The plan and objectives of that program are presented. 11 refs., 1 tab

  15. Uranium storage bed accident hazards evaluation

    International Nuclear Information System (INIS)

    Longhurst, G.R.; Shmayda, W.T.

    1989-10-01

    To properly assess hazards and risks associated with the use of uranium beds as tritium storage devices in fusion reactor systems, it is necessary to understand the consequences occurring in the event of an accident. Accidents involving uranium beds are postulated, and the possible results are considered. A research program to more fully and accurately understand those results has been initiated involving the Idaho National Engineering Laboratory and Ontario Hydro. The plan and objectives of that program are presented. 11 refs., 1 tab

  16. Fluid bed dryer and Aeropep solidification system

    International Nuclear Information System (INIS)

    1975-01-01

    Performance measurements were made on the model of the Fluidized-bed Calciner developed by Aerojet Liquid Rocket Co. The measurements were made over the period August 11-19, 1975, at the Sacramento location of the calciner. The purpose of the tests was to evaluate the performance of the ALRC Fluidized Bed Concentrator for the processing of simulated waste containing realistic concentrations and chemical forms of radioiodine. (auth)

  17. Hydrodynamics of circulating and bubbling fluidized beds

    International Nuclear Information System (INIS)

    Gidaspow, D.P.; Tsuo, Y.P.; Ding, J.

    1991-01-01

    This paper reports that a review of modeling of the hydrodynamics of fluidization of bubbling beds showed that inviscid two-fluid models were able to predict a great deal of the behavior of bubbling beds because the dominant mechanism of energy dissipation is the drag between the particles and the fluid. The formation, the growth and the bursting of bubbles were predicted. Predicted wall-to-bed heat transfer coefficients and velocity profiles of jets agreed with measurements. Time average porosity distributions agreed with measurements done using gamma-ray densitometers without the use of any adjustable parameters. However, inviscid models could not correctly predict rates of erosion around tubes immersed into fluidized beds. To correctly model such behavior, granular stresses involving solids viscosity were added into the computer model. This viscosity arises due to random collision of particles. Several models fro this viscosity were investigated and the results compared to measurements of solids distributions in two-dimensional beds and to particle velocities reported in the literature. While in the case of bubbling beds the solids viscosity plays the role of a correction, modeling of a circulating fluidized bed (CFB) without a viscosity is not possible. Recent experimental data obtained at IIT and at IGT show that in CFB the solids viscous dissipation is responsible for as much as half of the pressure drop. From such measurement, solids viscosities were computed. These were used in the two fluid hydrodynamic model, to predict radial solids distributions and solids velocities which matched the experimental distributions. Most important, the model predicted cluster formation and transient internal circulation which is responsible for the favorable characteristics of CFBs, such as good wall-to-bed heat transfer. Video tape movies of computations compared favorably with high speed movies of the experiments

  18. A Pebble Bed Reactor cross section methodology

    International Nuclear Information System (INIS)

    Hudson, Nathanael H.; Ougouag, Abderrafi M.; Rahnema, Farzad; Gougar, Hans

    2009-01-01

    A method is presented for the evaluation of microscopic cross sections for the Pebble Bed Reactor (PBR) neutron diffusion computational models during convergence to an equilibrium (asymptotic) fuel cycle. This method considers the isotopics within a core spectral zone and the leakages from such a zone as they arise during reactor operation. The randomness of the spatial distribution of fuel grains within the fuel pebbles and that of the fuel and moderator pebbles within the core, the double heterogeneity of the fuel, and the indeterminate burnup of the spectral zones all pose a unique challenge for the computation of the local microscopic cross sections. As prior knowledge of the equilibrium composition and leakage is not available, it is necessary to repeatedly re-compute the group constants with updated zone information. A method is presented to account for local spectral zone composition and leakage effects without resorting to frequent spectrum code calls. Fine group data are pre-computed for a range of isotopic states. Microscopic cross sections and zone nuclide number densities are used to construct fine group macroscopic cross sections, which, together with fission spectra, flux modulation factors, and zone buckling, are used in the solution of the slowing down balance to generate a new or updated spectrum. The microscopic cross-sections are then re-collapsed with the new spectrum for the local spectral zone. This technique is named the Spectral History Correction (SHC) method. It is found that this method accurately recalculates local broad group microscopic cross sections. Significant improvement in the core eigenvalue, flux, and power peaking factor is observed when the local cross sections are corrected for the effects of the spectral zone composition and leakage in two-dimensional PBR test problems.

  19. The Physiology of Bed Rest. Chapter 39

    Science.gov (United States)

    Fortney, Suzanne M.; Schneider, Victor S.; Greenleaf, John E.

    1996-01-01

    Prolonged rest in bed has been utilized by physicians and other health-care workers to immobilize and confine patients for rehabilitation and restoration of health since time immemorial. The sitting or horizontal position is sought by the body to relieve the strain of the upright or vertical postures, for example during syncopal situations, bone fractures, muscle injuries, fatigue, and probably also to reduce energy expenditure. Most health-care personnel are aware that adaptive responses occurring during bed rest proceed concomitantly with the healing process; signs and symptoms associated with the former should be differentiated from those of the latter. Not all illnesses and infirmities benefit from prolonged bed rest. Considerations in prescribing bed rest for patients-including duration, body position, mode and duration of exercise, light-dark cycles, temperature, and humidity-have not been investigated adequately. More recently, adaptive physiological responses have been measured in normal, healthy subjects in the horizontal or slightly head-down postures during prolonged bed rest as analogs for the adaptive responses of astronauts exposed to the microgravity environment of outer and bed-rest research.

  20. How dynamic are ice-stream beds?

    Science.gov (United States)

    Davies, Damon; Bingham, Robert G.; King, Edward C.; Smith, Andrew M.; Brisbourne, Alex M.; Spagnolo, Matteo; Graham, Alastair G. C.; Hogg, Anna E.; Vaughan, David G.

    2018-05-01

    Projections of sea-level rise contributions from West Antarctica's dynamically thinning ice streams contain high uncertainty because some of the key processes involved are extremely challenging to observe. An especially poorly observed parameter is sub-decadal stability of ice-stream beds, which may be important for subglacial traction, till continuity and landform development. Only two previous studies have made repeated geophysical measurements of ice-stream beds at the same locations in different years, but both studies were limited in spatial extent. Here, we present the results from repeat radar measurements of the bed of Pine Island Glacier, West Antarctica, conducted 3-6 years apart, along a cumulative ˜ 60 km of profiles. Analysis of the correlation of bed picks between repeat surveys shows that 90 % of the bed displays no significant change despite the glacier increasing in speed by up to 40 % over the last decade. We attribute the negligible detection of morphological change at the bed of Pine Island Glacier to the ubiquitous presence of a deforming till layer, wherein sediment transport is in steady state, such that sediment is transported along the basal interface without inducing morphological change to the radar-sounded basal interface. Given the precision of our measurements, the upper limit of subglacial erosion observed here is 500 mm a-1, far exceeding erosion rates reported for glacial settings from proglacial sediment yields, but substantially below subglacial erosion rates of 1.0 m a-1 previously reported from repeat geophysical surveys in West Antarctica.

  1. Fluidized bed volume reduction of diverse radwastes

    International Nuclear Information System (INIS)

    McFee, J.N.; McConnell, J.W.; Waddoups, D.A.; Gray, M.F.; Harwood, L.E.; Clayton, N.J.; Drown, D.C.

    1981-01-01

    Method and apparatus for a fluidized bed radwaste volume reduction system are claimed. Low level radioactive wastes, combustible solids, ion exchange resins and filter sludges, and liquids, emanating from a reactor facility are introduced separately through an integrated waste influent system into a common fluidized bed vessel where volume reduction either through incineration or calcination occurs. Addition of a substance to the ion exchange resin before incineration inhibits the formation of low-melting point materials which tend to form clinkers in the bed. Solid particles are scrubbed or otherwise removed from the gaseous effluent of the vessel in an off-gas system, before the cooled and cleaned off-gas is released to the atmosphere. Iodine is chemically or physically removed from the off-gas. Otherwise, the only egress materials from the volume reduction system are containerized dry solids and tramp material. The bed material used during each mode may be circulated, cleaned, stored and exchanged from within the bed vessel by use of a bed material handling system. An instrumentation and control system provides operator information, monitors performance characteristics, implements start up and shut down procedures, and initiates alarms and emergency procedures during abnormal conditions

  2. WTP Pretreatment Facility Potential Design Deficiencies--Sliding Bed and Sliding Bed Erosion Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, E. K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-05-06

    This assessment is based on readily available literature and discusses both Newtonian and non-Newtonian slurries with respect to sliding beds and erosion due to sliding beds. This report does not quantify the size of the sliding beds or erosion rates due to sliding beds, but only assesses if they could be present. This assessment addresses process pipelines in the Pretreatment (PT) facility and the high level waste (HLW) transfer lines leaving the PT facility to the HLW vitrification facility concentrate receipt vessel.

  3. WTP Pretreatment Facility Potential Design Deficiencies--Sliding Bed and Sliding Bed Erosion Assessment

    International Nuclear Information System (INIS)

    Hansen, E. K.

    2015-01-01

    This assessment is based on readily available literature and discusses both Newtonian and non-Newtonian slurries with respect to sliding beds and erosion due to sliding beds. This report does not quantify the size of the sliding beds or erosion rates due to sliding beds, but only assesses if they could be present. This assessment addresses process pipelines in the Pretreatment (PT) facility and the high level waste (HLW) transfer lines leaving the PT facility to the HLW vitrification facility concentrate receipt vessel.

  4. Control of the Bed Temperature of a Circulating Fluidized Bed Boiler by using Particle Swarm Optimization

    Directory of Open Access Journals (Sweden)

    AYGUN, H.

    2012-05-01

    Full Text Available Circulating fluidized bed boilers are increasingly used in the power generation due to their higher combustion efficiency and lower pollutant emissions. Such boilers require an effective control of the bed temperature, because it influences the boiler combustion efficiency and the rate of harmful emissions. A Particle-Swarm-Optimization-Proportional-Integrative-Derivative (PSO-PID controller for the bed temperature of a circulating fluidized bed boiler is presented. In order to prove the capability of the proposed controller, its performances are compared at different boiler loads with those of a Fuzzy Logic (FL controller. The simulation results demonstrate some advantages of the proposed controller.

  5. Effect of bed configuration on pebble flow uniformity and stagnation in the pebble bed reactor

    International Nuclear Information System (INIS)

    Gui, Nan; Yang, Xingtuan; Tu, Jiyuan; Jiang, Shengyao

    2014-01-01

    Highlights: • Pebble flow uniformity and stagnation characteristics are very important for HTR-PM. • Arc- and brachistochrone-shaped configuration effects are studied by DEM simulation. • Best bed configurations with uniform flow and no stagnated pebbles are suggested. • Detailed quantified characteristics of bed configuration effects are shown for explanation. - Abstract: Pebble flow uniformity and stagnation characteristics are very important for the design of pebble bed high temperature gas-cooled reactor. Pebble flows inside some specifically designed contraction configurations of pebble bed are studied by discrete element method. The results show the characteristics of stagnation rates, recycling rates, radial distribution of pebble velocity and residence time. It is demonstrated clearly that the bed with a brachistochrone-shaped configuration achieves optimum levels of flow uniformity and recycling rate concentration, and almost no pebbles are stagnated in the bed. Moreover, the optimum choice among the arc-shaped bed configurations is demonstrated too. Detailed information shows the quantified characteristics of bed configuration effects on flow uniformity. In addition, a good design of the pebble bed configuration is suggested

  6. Parent-child bed-sharing: The good, the bad, and the burden of evidence.

    Science.gov (United States)

    Mileva-Seitz, Viara R; Bakermans-Kranenburg, Marian J; Battaini, Chiara; Luijk, Maartje P C M

    2017-04-01

    The practice of parent and child sharing a sleeping surface, or 'bed-sharing', is one of the most controversial topics in parenting research. The lay literature has popularized and polarized this debate, offering on one hand claims of dangers, and on the other, of benefits - both physical and psychological - associated with bed-sharing. To address the scientific evidence behind such claims, we systematically reviewed 659 published papers (peer-reviewed, editorial pieces, and commentaries) on the topic of parent-child bed-sharing. Our review offers a narrative walkthrough of the many subdomains of bed-sharing research, including its many correlates (e.g., socioeconomic and cultural factors) and purported risks or outcomes (e.g., sudden infant death syndrome, sleep problems). We found general design limitations and a lack of convincing evidence in the literature, which preclude making strong generalizations. A heat-map based on 98 eligible studies aids the reader to visualize world-wide prevalence in bed-sharing and highlights the need for further research in societies where bed-sharing is the norm. We urge for multiple subfields - anthropology, psychology/psychiatry, and pediatrics - to come together with the aim of understanding infant sleep and how nightly proximity to the parents influences children's social, emotional, and physical development. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Effect of rolling bed on decubitus in bedridden nursing home patients.

    Science.gov (United States)

    Izutsu, T; Matsui, T; Satoh, T; Tsuji, T; Sasaki, H

    1998-02-01

    Decubitus is one of the most difficult management problems encountered in bedridden elderly patients. Relief of pressure over decubitus is the most important principle of the management. We developed a rolling air cushion bed which turns the patient to a 15-degree inclined lateral position with an inflating ripple mattress, a longitudinally aligned air inflatable tube. The position of the patients was changed between right and left laterals and to supine every 15 minutes automatically. Nineteen bedridden patients with decubitus used the rolling air cushion bed for 3 months and 12 bedridden patients with decubitus used a conventional bed and had their position changes every 2 hours by care givers. Severity of decubitus was divided into 4 grades and the decubitus significantly improved from 2.8 (S.E. 0.2) to 2.0 (S.E. 0.3) after 3 months in patients using the rolling air cushion bed, while in patients with conventional beds it changed from 3.0 (S.E. 0.2) to 3.2 (S.E. 0.2) (not statistically significant). We suggest that the rolling air cushion bed would be beneficial to decubitus relief in bedridden elderly and may relieve labor by care givers.

  8. A new approach to define surface/sub-surface transition in gravel beds

    Science.gov (United States)

    Haynes, Heather; Ockelford, Anne-Marie; Vignaga, Elisa; Holmes, William

    2012-12-01

    The vertical structure of river beds varies temporally and spatially in response to hydraulic regime, sediment mobility, grain size distribution and faunal interaction. Implicit are changes to the active layer depth and bed porosity, both critical in describing processes such as armour layer development, surface-subsurface exchange processes and siltation/ sealing. Whilst measurements of the bed surface are increasingly informed by quantitative and spatial measurement techniques (e.g., laser displacement scanning), material opacity has precluded the full 3D bed structure analysis required to accurately define the surface-subsurface transition. To overcome this problem, this paper provides magnetic resonance imaging (MRI) data of vertical bed porosity profiles. Uniform and bimodal (σ g = 2.1) sand-gravel beds are considered following restructuring under sub-threshold flow durations of 60 and 960 minutes. MRI data are compared to traditional 2.5D laser displacement scans and six robust definitions of the surface-subsurface transition are provided; these form the focus of discussion.

  9. Thermofluid-neutronic stability of the rotating, fluidized bed, space-power reactor

    International Nuclear Information System (INIS)

    Lee, C.C.; Jones, O.C.; Becker, M.

    1993-01-01

    A rotating fluidized bed nuclear reactor has the potential of being a vary attractive option for ultra-high power space systems, especially for propulsion. Research has already examined fuel bed expansion due to variations in state variables, propellant flow rate, and rotational speed, and has also considered problems related to thermal stress. This paper describes the results of a coupled thermofluid-neutronic analysis where perturbations in fuel bed height caused by maneuvering changes in operating conditions alter power levels due to varying absorption of neutrons which would otherwise leak from the system, mainly through the nozzle. This first analysis was not a detailed stability analysis. Rather, it utilized simplified neutronic methods, and was intended to provide an order-of-magnitude assessment of the stability of the reactor with the intention to determine whether or not stability might be a 'concept killer'. Stability was compared with a fixed-fuel-bed reactor of identical geometry for three different cases comprising a set of small, medium and large sizes/powers from 250 MW to 5 GW. It was found that power fluctuations in the fluidized bed reactor were larger by 100 db or more than expected in a packed bed reactor of the same geometry, but never resulted in power excursions. Margins to unit gain in some cases, however, were sufficiently small that the approximations in this quasi-2-dimensional model may not be sufficiently accurate to preclude significant excursions. (orig.)

  10. Bioenergy originating from biomass combustion in a fluidized bed

    Energy Technology Data Exchange (ETDEWEB)

    Crujeira, T.; Gulyurtlu, I.; Lopes, H.; Abelha, P.; Cabrita, I. [INETI/DEECA, Lisboa (Portugal)

    2008-07-01

    Bioenergy could significantly contribute to reducing and controlling greenhouse emissions (GHG) and to replace fossil fuels in large power plants. Although the use of biomass, originating from forests, could be beneficial, particularly in preventing fires, there are obstacles to achieve a sustainable supply chain of biomass in most European countries. In addition, there are also technical barriers as requirements of biomass combustion may differ from those of coal, which could mean significant retrofitting of existing installations. The combustion behaviour of different biomass materials were studied on a pilot fluidised bed combustor, equipped with two cyclones for particulate matter removal. The gaseous pollutants leaving the stack were sampled under isokinetic conditions for particulate matter, chlorine compounds, heavy metals and dioxins and furans (PCDD/F). The results obtained indicated that the combustion of these materials did not present any operational problem, although for temperatures above 800{sup o}C, bed agglomeration could be observed for all biomass materials studied. Most of the combustion of biomass, contrary to what is observed for coal, takes place in the riser where the temperature was as much as 150{sup o}C above that of the bed. Stable combustion conditions were achieved as well as high combustion efficiency. When compared with the emissions of bituminous coal, the most used fossil fuel, the emissions of CO and SO2 were found to be lower and NOx emissions were similar to those of coal. HCl and PCDD/F could be considerable with biomasses containing high chlorine levels, as in the case of straw. It was observed that the nature of ash could give rise serious operating problems.

  11. Atmospheric Fluidized Bed Combustion testing of North Dakota lignite

    Energy Technology Data Exchange (ETDEWEB)

    Goblirsch, G; Vander Molen, R H; Wilson, K; Hajicek, D

    1980-05-01

    The sulfur retention by the inherent alkali, and added limestone sorbent, perform about the same and are reasonably predictable within a range of about +-10% retention by application of alkali to sulfur ratio. Temperature has a substantial effect on the retention of sulfur by the inherent alkali or limestone. The temperature effect is not yet fully understood but it appears to be different for different coals and operational conditions. The emission of SO/sub 2/ from the fluid bed burning the Beulah lignite sample used for these tests can be controlled to meet or better the current emission standards. The injection of limestone to an alkali-to-sulfur molar ratio of 1.5 to 1, should lower the SO/sub 2/ emissions below the current requirement of 0.6 lb SO/sub 2//10/sup 6/ Btu to 0.4 lb SO/sub 2//10/sup 6/ Btu, a safe 33% below the standard. Agglomeration of bed material, and consequent loss of fluidization quality can be a problem when burning high sodium lignite in a silica bed. There appears, however, to be several ways of controlling the problem including the injection of calcium compounds, and careful control of operating conditions. The heat transfer coefficients measured in the CPC and GFETC tests are comparable to data obtained by other researchers, and agree reasonably well with empirical conditions. The NO/sub x/ emissions measured in all of the tests on Beulah lignite are below the current New Source Performance Standard of 0.5 lb NO/sub 2//10/sup 6/ Btu input. Combustion efficiencies for the Beulah lignite are generally quite high when ash recycle is being used. Efficiencies in the range of 98% to 99%+ have been measured in all tests using this fuel.

  12. Hospital bed ventilation: impact of operation mode on exposure

    DEFF Research Database (Denmark)

    Bolashikov, Zhecho Dimitrov; Melikov, Arsen Krikor; Barova, Mariya

    2014-01-01

    a second patient lying in the other bed. The doctor stood up 0.55 m from the bed facing the sick patient. Two pairs of localized ventilation units were attached near the heads of both patients alongside the beds to capture, clean and release the captured exhaled air from the lying patients. When the bed...

  13. Model of rough bed for numerical simulation of saltation

    Czech Academy of Sciences Publication Activity Database

    Kharlamova, Irina; Vlasák, Pavel

    2015-01-01

    Roč. 19, č. 3 (2015), s. 366-385 ISSN 1964-8189 R&D Projects: GA ČR GA103/09/1718; GA ČR GAP105/10/1574 Institutional support: RVO:67985874 Keywords : saltation * bed load transport * rough bed * armoured bed * bed roughness Subject RIV: BK - Fluid Dynamics Impact factor: 0.636, year: 2015

  14. The effect of alternative graphical displays used to present the benefits of antibiotics for sore throat on decisions about whether to seek treatment: a randomized trial.

    Science.gov (United States)

    Carling, Cheryl L L; Kristoffersen, Doris Tove; Flottorp, Signe; Fretheim, Atle; Oxman, Andrew D; Schünemann, Holger J; Akl, Elie A; Herrin, Jeph; MacKenzie, Thomas D; Montori, Victor M

    2009-08-01

    We conducted an Internet-based randomized trial comparing four graphical displays of the benefits of antibiotics for people with sore throat who must decide whether to go to the doctor to seek treatment. Our objective was to determine which display resulted in choices most consistent with participants' values. This was the first of a series of televised trials undertaken in cooperation with the Norwegian Broadcasting Company. We recruited adult volunteers in Norway through a nationally televised weekly health program. Participants went to our Web site and rated the relative importance of the consequences of treatment using visual analogue scales (VAS). They viewed the graphical display (or no information) to which they were randomized and were asked to decide whether to go to the doctor for an antibiotic prescription. We compared four presentations: face icons (happy/sad) or a bar graph showing the proportion of people with symptoms on day three with and without treatment, a bar graph of the average duration of symptoms, and a bar graph of proportion with symptoms on both days three and seven. Before completing the study, all participants were shown all the displays and detailed patient information about the treatment of sore throat and were asked to decide again. We calculated a relative importance score (RIS) by subtracting the VAS scores for the undesirable consequences of antibiotics from the VAS score for the benefit of symptom relief. We used logistic regression to determine the association between participants' RIS and their choice. 1,760 participants completed the study. There were statistically significant differences in the likelihood of choosing to go to the doctor in relation to different values (RIS). Of the four presentations, the bar graph of duration of symptoms resulted in decisions that were most consistent with the more fully informed second decision. Most participants also preferred this presentation (38%) and found it easiest to understand (37

  15. Balance Problems

    Science.gov (United States)

    ... often, it could be a sign of a balance problem. Balance problems can make you feel unsteady. You may ... related injuries, such as a hip fracture. Some balance problems are due to problems in the inner ...

  16. Improved design model for the multi-bed system in the storage and delivery system at ITER: Effects of decay of hydriding and dehydriding rate of a getter bed

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae-Uk [Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Hyoja-Dong, Pohang 790-784 (Korea, Republic of); Chang, Min Ho; Yun, Sei-Hun [National Fusion Research Institute, 169-148-gil Kwahak-ro, Yusong-gu, Daejon 34133 (Korea, Republic of); Lee, Euy Soo, E-mail: eslee@dongguk.edu [Department of Chemical & Biochemical Engineering, Dongguk University, Seoul 100-715 (Korea, Republic of); Lee, In-Beum [Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Hyoja-Dong, Pohang 790-784 (Korea, Republic of)

    2016-12-15

    This paper proposes an improved design model for the multi-bed system in the Storage and Delivery System considering that the hydriding and dehydriding rates of a getter bed decay over time. More specifically, the hydriding and dehydriding rates are influenced by the amount of remaining inventory in the getter bed and time simultaneously. Therefore, we formulate the rate decays mathematically to consider these features in the design model. The optimization problem is formulated as a mixed integer nonlinear program (MINLP) model with nonlinear constraints. Inductive operation scenario is presented to illustrate the applicability of the proposed model.

  17. Improved design model for the multi-bed system in the storage and delivery system at ITER: Effects of decay of hydriding and dehydriding rate of a getter bed

    International Nuclear Information System (INIS)

    Lee, Jae-Uk; Chang, Min Ho; Yun, Sei-Hun; Lee, Euy Soo; Lee, In-Beum

    2016-01-01

    This paper proposes an improved design model for the multi-bed system in the Storage and Delivery System considering that the hydriding and dehydriding rates of a getter bed decay over time. More specifically, the hydriding and dehydriding rates are influenced by the amount of remaining inventory in the getter bed and time simultaneously. Therefore, we formulate the rate decays mathematically to consider these features in the design model. The optimization problem is formulated as a mixed integer nonlinear program (MINLP) model with nonlinear constraints. Inductive operation scenario is presented to illustrate the applicability of the proposed model.

  18. Experimental study of flow field characteristics on bed configurations in the pebble bed reactor

    International Nuclear Information System (INIS)

    Jia, Xinlong; Gui, Nan; Yang, Xingtuan; Tu, Jiyuan; Jia, Haijun; Jiang, Shengyao

    2017-01-01

    Highlights: • PTV study of flow fields of pebble bed reactor with different configurations are carried out. • Some criteria are proposed to quantify vertical velocity field and flow uniformity. • The effect of different pebble bed configurations is also compared by the proposed criteria. • The displacement thickness is used analogically to analyze flow field characteristics. • The effect of mass flow variation in the stagnated region of the funnel flow is measured. - Abstract: The flow field characteristics are of fundamental importance in the design work of the pebble bed high temperature gas cooled reactor (HTGR). The different effects of bed configurations on the flow characteristics of pebble bed are studied through the PTV (Particle Tracking Velocimetry) experiment. Some criteria, e.g. flow uniformity (σ) and mass flow level (α), are proposed to estimate vertical velocity field and compare the bed configurations. The distribution of the Δθ (angle difference between the individual particle velocity and the velocity vector sum of all particles) is also used to estimate the resultant motion consistency level. Moreover, for each bed configuration, the thickness of displacement is analyzed to measure the effect of the funnel flow zone based on the boundary layer theory. Detailed information shows the quantified characteristics of bed configuration effects on flow uniformity and other characteristics; and the sequence of levels of each estimation criterion is obtained for all bed configurations. In addition, a good design of the pebble bed configuration is suggested and these estimation criteria can be also applied and adopted in testing other geometry designs of pebble bed.

  19. Experimental measurement of variation of heat transfer coefficient and temperature gradients in 16'' deep fluidised beds

    International Nuclear Information System (INIS)

    Blacker, P.T.; McLain, D.R.

    1962-04-01

    The object of the experiments was to choose suitable particulate materials for a fluidised bed cooler, to test a deep fluidised bed for uniformity of heat transfer coefficient, and to explore the temperature distribution in a centrally heated annular fluidised bed. This memorandum records the techniques used and some of the practical aspects involved, together with the performance results obtained, for the assistance of other experimenters who may wish to use fluidised beds as a laboratory technique. Mathematical correlation of the results has not been attempted since some of the properties of the bed material were not known and to determine them was beyond the scope of the work programme. Rather, we have compared our results with those of other experimenters. Graphite tubes, for use in steady state thermal stress experiments, are to be heated by a graphite radiant heater situated in the bore and cooled on the outer surface. The tubes are 2 cm. bore, 8 cm. outside diameter and 48 cm. long. The outside temperature of the tubes is to be between 500 deg. C. and 1500 deg. C. It is estimated that the heat transfer rate required for fracture at the outer surface is 30 watts/cm 2 . This could readily be achieved by cooling with liquid metals, water or high velocity gas. However, serious problems of either materials compatibility or mechanical complexity make these undesirable. A water-cooled fluidised bed of compatible solids fluidised with nitrogen gas can overcome most of these problems and give heat transfer coefficients close to that required, vis. about 0.1 w/cm C . A coolant bed about 20'' long would be required and an annulus of about 2'' radial width round the specimen was considered to be practicable

  20. Experimental measurement of variation of heat transfer coefficient and temperature gradients in 16'' deep fluidised beds

    Energy Technology Data Exchange (ETDEWEB)

    Blacker, P T; McLain, D R [Reactor Development Division, Atomic Energy Establishment, Winfrith, Dorchester, Dorset (United Kingdom)

    1962-04-15

    The object of the experiments was to choose suitable particulate materials for a fluidised bed cooler, to test a deep fluidised bed for uniformity of heat transfer coefficient, and to explore the temperature distribution in a centrally heated annular fluidised bed. This memorandum records the techniques used and some of the practical aspects involved, together with the performance results obtained, for the assistance of other experimenters who may wish to use fluidised beds as a laboratory technique. Mathematical correlation of the results has not been attempted since some of the properties of the bed material were not known and to determine them was beyond the scope of the work programme. Rather, we have compared our results with those of other experimenters. Graphite tubes, for use in steady state thermal stress experiments, are to be heated by a graphite radiant heater situated in the bore and cooled on the outer surface. The tubes are 2 cm. bore, 8 cm. outside diameter and 48 cm. long. The outside temperature of the tubes is to be between 500 deg. C. and 1500 deg. C. It is estimated that the heat transfer rate required for fracture at the outer surface is 30 watts/cm{sup 2}. This could readily be achieved by cooling with liquid metals, water or high velocity gas. However, serious problems of either materials compatibility or mechanical complexity make these undesirable. A water-cooled fluidised bed of compatible solids fluidised with nitrogen gas can overcome most of these problems and give heat transfer coefficients close to that required, vis. about 0.1 w/cm C . A coolant bed about 20'' long would be required and an annulus of about 2'' radial width round the specimen was considered to be practicable.