Photoexcitation and Photochemical Stability of Organic Photovoltaic Materials from First Principles

Science.gov (United States)

Sai, Na; Leung, Kevin

2013-03-01

The development of high efficiency organic photovoltaics (OPV) has recently become enabled by the synthesis of new conjugated polymers with low band gap that allow light absorption over a broader range of the spectrum. Stability of these new polymers, a key requirement for commercialization, has not yet received sufficient attention. Here, we report first-principles theoretical modeling of photo-induced degradation of OPV polymers carried out using ab-initio density functional theory (DFT). We report photooxidation routes and reaction products for reactive species including superoxide oxygen anions and hydroxyl groups interacting with the standard workhorse OPV polymer, poly(3-hexyl-thiophene) (P3HT). We discuss theoretical issues and challenges affecting the modeling such reactions in OPV polymers. We also discuss the application of theoretical methods to low-band-gap polymers, and in particular, the effect of the chemical substitution on the photoexcitation properties of these new polymers. Sandia National Laboratories is a multiprogram laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Deparment of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. This work is supported by the Energy Frontier Research Center funded by the U.S. DOE Office of Basic Energy Sciences under Award number DE-SC0001091.

Behavior Modification: Basic Principles. Third Edition

Science.gov (United States)

Lee, David L.; Axelrod, Saul

2005-01-01

This classic book presents the basic principles of behavior emphasizing the use of preventive techniques as well as consequences naturally available in the home, business, or school environment to change important behaviors. This book, and its companion piece, "Measurement of Behavior," represents more than 30 years of research and strategies in…

Phase equilibria basic principles, applications, experimental techniques

CERN Document Server

Reisman, Arnold

2013-01-01

Phase Equilibria: Basic Principles, Applications, Experimental Techniques presents an analytical treatment in the study of the theories and principles of phase equilibria. The book is organized to afford a deep and thorough understanding of such subjects as the method of species model systems; condensed phase-vapor phase equilibria and vapor transport reactions; zone refining techniques; and nonstoichiometry. Physicists, physical chemists, engineers, and materials scientists will find the book a good reference material.

Magnetically integrated high step-up resonant DC-DC converter for distributed photovoltaic systems

DEFF Research Database (Denmark)

Vinnikov, Dmitri; Chub, Andrii; Liivik, Elizaveta

2017-01-01

In this paper magnetically integrated resonant single-switch quasi-Z-source DC-DC converter is evaluated as a candidate topology for the low-cost photovoltaic microconverter. The derivation of the topology and its basic operation principle are explained. Generalized design guidelines...

Design Principles for the Atomic and Electronic Structure of Halide Perovskite Photovoltaic Materials: Insights from Computation.

Science.gov (United States)

Berger, Robert F

2018-02-09

In the current decade, perovskite solar cell research has emerged as a remarkably active, promising, and rapidly developing field. Alongside breakthroughs in synthesis and device engineering, halide perovskite photovoltaic materials have been the subject of predictive and explanatory computational work. In this Minireview, we focus on a subset of this computation: density functional theory (DFT)-based work highlighting the ways in which the electronic structure and band gap of this class of materials can be tuned via changes in atomic structure. We distill this body of computational literature into a set of underlying design principles for the band gap engineering of these materials, and rationalize these principles from the viewpoint of band-edge orbital character. We hope that this perspective provides guidance and insight toward the rational design and continued improvement of perovskite photovoltaics. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Basic Modelling principles and Validation of Software for Prediction of Collision Damage

DEFF Research Database (Denmark)

Simonsen, Bo Cerup

2000-01-01

This report describes basic modelling principles, the theoretical background and validation examples for the collision damage prediction module in the ISESO stand-alone software.......This report describes basic modelling principles, the theoretical background and validation examples for the collision damage prediction module in the ISESO stand-alone software....

Squids: principles and basic applications in experimental physics

International Nuclear Information System (INIS)

Ocio, M.

1990-01-01

The basic principles and the description of the technical aspects of SQUIDs (Superconducting Quantum Interference Devices) are described. The applications of SQUIDs in experimental researches and low temperature physics experiments are given. The concepts of fluxoid quantization in a superconductor and Josephson tunnelling are reviewed. The principles, the operation, the noise and the different configurations of r.f. and direct current bias SQUIDs are summarized. The principal characteristics of several SQUIDs are reported

Basic principles governing the design of magnetic switches

International Nuclear Information System (INIS)

Birx, D.L.; Lauer, E.J.; Reginato, L.L.; Schmidt, J.; Smith, M.

1980-01-01

The idea of using saturable reactors as the basis of high power pulse generators is not a new concept, but there have been few recent applications of this technology. Here the principle of magnetic pulse generation is briefly described and some of the basic guidelines used to design these circuits are discussed. A demonstration of the principles by a small scale pulse amplifier is presented, and finally there is an extrapolation to a large scale system

Basic principles of radiation protection in Canada

International Nuclear Information System (INIS)

1990-03-01

The major goal of radiation protection in Canada is to ensure that individuals are adequately protected against the harm that might arise from unwarranted exposure to ionizing radiation. This report deals with the basic principles and organizations involved in protection against ionizing radiation. Three basic principles of radiation protection are: 1) that no practice shall be adopted unless its introduction produces a positive net benefit for society, 2) that all exposures shall be kept as low as reasonably achievable, relevant economic and social factors being taken into account, and 3) that doses to individuals should not exceed specified annual limits. The limit for radiation workers is currently 50 mSv per year, and exposures of the general public should not exceed a small fraction of that of radiation workers. Other specific areas in radiation protection which have received considerable attention in Canada include limitations on collective dose (the sum of the individual doses for all exposed individuals), exemption rules for extremely small radiation doses or amounts of radioactive materials, occupational hazards in uranium mining, and special rules for protection of the foetus in pregnant female radiation workers. Implementation of radiation protection principles in Canada devolves upon the Atomic Energy Control Board, the Department of National Health and Welfare, provincial authorities, licensees and radiation workers. A brief description is given of the roles of each of these groups

[Etiopathogenesis of diarrhea and basic principles of diagnosis and therapy].

Science.gov (United States)

Ehrmann, J

2002-06-01

Acute diarrhoea is worldwide the second most frequent disease after acute inflammations of the airways. Chronic diarrhoea is a less frequent disease, nevertheless the GP, specialist in internal medicine or gastroenterologist encounters it very frequently. For correct understanding of basic diagnostic and therapeutic principles of diarrhoea knowledge of its etiopathogenesis is necessary. In the submitted review the author mentions the functions of the small and large intestine and their part in the development of diarrhoea. He gives also the definition and classification of diarrhoea. The author presents the basic characteristics of osmotic, secretory, inflammatory, motor diarrhoea and diarrhoea associated with increased intestinal filtration. The basic diagnostic and therapeutic principles are in the last part of the review which has an educational character.

Basic safety principles for nuclear power plants

International Nuclear Information System (INIS)

1988-01-01

Nuclear power plant safety requires a continuing quest for excellence. All individuals concerned should constantly be alert to opportunities to reduce risks to the lowest practicable level. The quest, however, is most likely to be fruitful if it is based on an understanding of the underlying objectives and principles of nuclear safety, and the way in which its aspects are interrelated. This report is an attempt to provide a logical framework for such an understanding. The proposed objectives and principles of nuclear safety are interconnected and must be taken as a whole; they do not constitute a menu from which selection can be made. The report takes account of current issues and developments. It includes the concept of safety objectives and the use of probabilistic safety assessment. Reliability targets for safety systems are discussed. The concept of a 'safety culture' is crucial. Attention has been paid to the need for planning for accident management. The report contains objectives and principles. The objectives state what is to be achieved; the principles state how to achieve it. In each case, the basic principle is stated as briefly as possible. The accompanying discussion comments on the reasons for the principle and its importance, as well as exceptions, the extent of coverage and any necessary clarification. The discussion is as important as the principle it augments. 4 figs

Guiding principle for crystalline Si photovoltaic modules with high tolerance to acetic acid

Science.gov (United States)

Masuda, Atsushi; Hara, Yukiko

2018-04-01

A guiding principle for highly reliable crystalline Si photovoltaic modules, especially those with high tolerance to acetic acid generated by hydrolysis reaction between water vapor and an ethylene-vinyl acetate (EVA) encapsulant, is proposed. Degradation behavior evaluated by the damp heat test strongly depends on Ag finger electrodes and also EVA encapsulants. The acetic acid concentration in EVA on the glass side directly determines the degradation behavior. The most important factor for high tolerance is the type of Ag finger electrode materials when using an EVA encapsulant. Photovoltaic modules using newly developed crystalline Si cells with improved Ag finger electrode materials keep their maximum power of 80% of the initial value even after the damp heat test at 85 °C and 85% relative humidity for 10000 h. The pattern of dark regions in electroluminescence images is also discussed on the basis of the dynamics of acetic acid in the modules.

Graphite-based photovoltaic cells

Science.gov (United States)

Lagally, Max; Liu, Feng

2010-12-28

The present invention uses lithographically patterned graphite stacks as the basic building elements of an efficient and economical photovoltaic cell. The basic design of the graphite-based photovoltaic cells includes a plurality of spatially separated graphite stacks, each comprising a plurality of vertically stacked, semiconducting graphene sheets (carbon nanoribbons) bridging electrically conductive contacts.

Designing User-Computer Dialogues: Basic Principles and Guidelines.

Science.gov (United States)

Harrell, Thomas H.

This discussion of the design of computerized psychological assessment or testing instruments stresses the importance of the well-designed computer-user interface. The principles underlying the three main functional elements of computer-user dialogue--data entry, data display, and sequential control--are discussed, and basic guidelines derived…

Implementation of a basic principle simulator

International Nuclear Information System (INIS)

De Greef, J.F.

1982-01-01

During the last twenty years, the Belgian Nuclear Energy Centre (SCK-CEN) gained a lot of experience in mathematical modelling and simulation of nuclear reactor power plant operation. The framework, in which these activities took place, was mainly concerned with security analysis of these devices and with training operation personnel of these plants. In the last years a fourth generation hybrid computer including an AD/FIVE analog computer of Applied Dynamics Inc. (ADI) and a PDP-11/34 digital computer of Digital Equipment Corporation (DEC) were installed. Furthermore, a home made operator's desk simulating the elements of the control room of a nuclear power plant completes the computer system for real-time training purposes. The described equipment is typically that of a Basic Principle Simulator, a device that quickly and effectively imparts the basic concepts of a nuclear power plant operation

Basic principles of nuclear magnetic resonance imaging

International Nuclear Information System (INIS)

Valk, J.; MacLean, C.; Algra, P.R.

1985-01-01

The intent of this book is to help clinicians understand the basic physical principles of magnetic resonance (MR) imaging. The book consists of the following: a discussion of elementary considerations; pulse sequencing; localization of MR signals in space; MR equipment; MR contrast agents; clinical applications; MR spectroscopy; and biological effects of MR imaging; a set of appendixes; and a bibliography. Illustrations and images are included

Information report from the Economic Affairs commission on photovoltaic energy; Rapport d'information depose en application de l'article 145 du reglement par la commission des affaires economiques sur l'energie photovoltaique

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

Today and for several years to come, photovoltaic energy represents only a minimal part of the world's electric power production. Photovoltaic energy is only at its beginnings, however several countries have already taken opportunities in the business. This report gives a comprehensive information about photovoltaic energy (basic principles, conversion systems, photovoltaic power plants, incentive programs in other developed countries, regulations ...) and arguments for the development of a structured photovoltaic energy policy in France.

DOE/OER-sponsored basic research in high-efficiency photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Deb, S.K.; Benner, J.P. [National Renewable Energy Lab., Golden, CO (United States)

1996-05-01

A high-efficiency photovoltaic project involving many of the national laboratories and several universities has been initiated under the umbrella of the U.S. Department of Energy (DOE) Center of Excellence for the Synthesis and Processing of Advanced Materials. The objectives of this project are to generate advances in fundamental scientific understanding that will impact the efficiency, cost and reliability of thin-film photovoltaic cells. The project is focused on two areas. (1) Silicon-Based Thin Films, in which key scientific and technological problems involving amorphous and polycrystalline silicon thin films will be addressed, and (2) Next-Generation Thin-Film Photovoltaics, which will be concerned with the possibilities of new advances and breakthroughs in the materials and physics of photovoltaics using non-silicon-based materials.

Solar photovoltaic basics a study guide for the NABCEP entry level exam

CERN Document Server

White, Sean

2014-01-01

Whether or not you are taking the NABCEP Entry Level Exam, learning the material covered in this book is the best investment you can make towards your place in the solar industry.This book explains the science of photovoltaics (PV) in a way that most people can understand using the curriculum which reflects the core modules of the NABCEP Entry Level Exam.Providing complete coverage of the NABCEP syllabus in easily accessible chapters, addressing all of the core objectives that will aid in passing the PV Entry Level Exam including the ten main skill sets:PV Markets and Applications Safety Basic

Power electronics basics operating principles, design, formulas, and applications

CERN Document Server

Rozanov, Yuriy; Chaplygin, Evgeny; Voronin, Pavel

2015-01-01

Power Electronics Basics: Operating Principles, Design, Formulas, and Applications provides fundamental knowledge for the analysis and design of modern power electronic devices. This concise and user-friendly resource:Explains the basic concepts and most important terms of power electronicsDescribes the power assemblies, control, and passive components of semiconductor power switchesCovers the control of power electronic devices, from mathematical modeling to the analysis of the electrical processesAddresses pulse-width modulation, power quality control, and multilevel, modular, and multicell

Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics

Institute of Scientific and Technical Information of China (English)

Chao CHEN; Matthew C.BEARD; Jiang TANG; David C.BOBELA; Ye YANG; Shuaicheng LU; Kai ZENG; Cong GE; Bo YANG; Liang GAO; Yang ZHAO

2017-01-01

Antimony selenide (Sb2Se3) is a promising absorber material for thin film photovoltaics because of its attractive material,optical and electrical properties.In recent years,the power conversion efficiency (PCE) of Sb2Se3 thin film solar cells has gradually enhanced to 5.6％.In this article,we systematically studied the basic physical properties of Sb2Se3 such as dielectric constant,anisotropic mobility,carrier lifetime,diffusion length,defect depth,defect density and optical band tail states.We believe such a comprehensive characterization of the basic physical properties of Sb2Se3 lays a solid foundation for further optimization of solar device performance.

Ethics of Plant Breeding: The IFOAM Basic Principles as a Guide for the Evolution of Organic Plant Breeding

NARCIS (Netherlands)

Lammerts Van Bueren, E.

2010-01-01

The basic values of organic agriculture is laid down in the IFOAM four basic principles: the principle of health, the principle of ecology, the principle of fairness and the principle of care. These principles and the consequences and challenges for the further development of organic plant breeding

Photovoltaic Solar Energy

International Nuclear Information System (INIS)

Gonzalez N, J.C.; Leal C, H.

1998-01-01

A short historical review of the technological advances; the current state and the perspectives of the materials for photovoltaic applications is made. Thereinafter, the general aspects of the physical principles and fundamental parameters that govern the operation of the solar cells are described. To way of the example, a methodology for the design and facilities size of a photovoltaic system is applied. Finally, the perspectives of photovoltaic solar energy in relationship to the market and political of development are mentioned

Declaration of Basic Principles for the Treatment of Prisoners.

Science.gov (United States)

Cosman, J. W.

1989-01-01

Education does not flourish in prisons because of prevailing notions about the punitive and retributive purposes of prisons. The United Nations is considering a Declaration of Basic Principles for the Treatment of Prisoners that is intended to bring education to the forefront of criminal justice policy. (SK)

Basic principles and criteria on radioactive waste disposal sites

International Nuclear Information System (INIS)

Dlouhy, Z.; Kropikova, S.

1980-01-01

The basic principles are stated of radiation protection of the workers at radioactive waste disposal facilities, which must be observed in the choice of radioactive waste disposal sites. The emergency programme, the operating regulations and the safety report are specified. Workplace safety regulations are cited. (author)

A new estimation method of irradiance on a partially shaded PV generator in grid-connected photovoltaic systems

Energy Technology Data Exchange (ETDEWEB)

Drif, M. [Grupo de Investigacion IDEA, Departamento de Electronica, Escuela Politecnica Superior, Universidad de Jaen, Campus Las Lagunillas, 23071 Jaen (Spain); Centre de Developpement des Energies Renouvelables, BP 62, Route de l' Observatoire, 16340 Bouzareah, Algiers (Algeria); Perez, P.J.; Aguilera, J.; Aguilar, J.D. [Grupo de Investigacion IDEA, Departamento de Electronica, Escuela Politecnica Superior, Universidad de Jaen, Campus Las Lagunillas, 23071 Jaen (Spain)

2008-09-15

A new method for estimating the irradiance on a partially shaded photovoltaic generator system is proposed. The basic principle of this method consists of two parts: firstly, an approximation of the obstacles' outline or the local horizon by a set of linear functions. Here, a survey of the surroundings is based on the reading of the topographic coordinates of the only significant points of all the objects surrounding the photovoltaic generator. Secondly, the irradiance on the photovoltaic plane is estimated using an accurate model such as the Perez et al. model and assuming that the shading affects both the direct radiation and a part of the diffuse component (circumsolar component). The aim of this paper is to present the principles of the proposed method and the algorithm used for calculating the irradiance on shaded planes. In addition, the results of the comparison between the simulated and measured values of this method are presented. (author)

Ion-Exchange Chromatography: Basic Principles and Application.

Science.gov (United States)

Cummins, Philip M; Rochfort, Keith D; O'Connor, Brendan F

2017-01-01

Ion-Exchange Chromatography (IEC) allows for the separation of ionizable molecules on the basis of differences in charge properties. Its large sample-handling capacity, broad applicability (particularly to proteins and enzymes), moderate cost, powerful resolving ability, and ease of scale-up and automation have led to it becoming one of the most versatile and widely used of all liquid chromatography (LC) techniques. In this chapter, we review the basic principles of IEC, as well as the broader criteria for selecting IEC conditions. By way of further illustration, we outline basic laboratory protocols to partially purify a soluble serine peptidase from bovine whole brain tissue, covering crude tissue extract preparation through to partial purification of the target enzyme using anion-exchange chromatography. Protocols for assaying total protein and enzyme activity in both pre- and post-IEC fractions are also described.

Rethinking Teaching of Basic Principles of Economics from a Sustainability Perspective

Directory of Open Access Journals (Sweden)

Namrata Chindarkar

2018-05-01

Full Text Available In this paper, we posit that sustainability warrants explicit recognition in the teaching of basic principles of economics. The conventional exposition of conceptual and analytic frameworks in basic principles in almost all standard economics textbooks overlooks at least two basic flaws. The first of these concerns the collection of residual externalities that exist without being internalized in market transactions and hence fall outside the calculus of national income accounting. For example, not all energy resource prices capture the entirety of the damages inflicted on natural ecosystems. The cumulus of residual externalities threatens the feasibility of sustainability. The second flaw is the absence of sustainability as a necessary condition in the fundamental benchmark of perfect competition (PC. Sustainability, when explicitly introduced in the PC benchmark, results in significant changes to conceptual premises in economics. The most significant of such changes concerns the axiomatic differentiation between “goods” and “bads”.

Synchrotron radiation, a powerful tool in research and technological development. Basic principles

International Nuclear Information System (INIS)

Jimenez M, J.

2001-01-01

The basic principles of synchrotron radiation emission in electron accelerators are presented. The main characteristics of synchrotron radiation, together with the physical principles that describe its interaction with different materials are also discussed. Different areas in which the development of synchrotron radiation has made a major impact are given. (Author)

Photovoltaics

International Nuclear Information System (INIS)

2006-06-01

This road-map proposes by the Group Total aims to inform the public on the photovoltaics. It presents the principles and the applications, the issues and the current technology, the challenges and the Group Total commitment in the domain. (A.L.B.)

Basic safety principles of KLT-40C reactor plants

International Nuclear Information System (INIS)

Beliaev, V.; Polunichev, V.

2000-01-01

The KLT-40 NSSS has been developed for a floating power block of a nuclear heat and power station on the basis of ice-breaker-type NSSS (Nuclear Steam Supply System) with application of shipbuilding technologies. Basic reactor plant components are pressurised water reactor, once-through coil-type steam generator, primary coolant pump, emergency protection rod drive mechanisms of compensate group-electromechanical type. Basic RP components are incorporated in a compact steam generating block which is arranged within metal-water shielding tank's caissons. Domestic regulatory documents on safety were used for the NSSS design. IAEA recommendations were also taken into account. Implementation of basic safety principles adopted presently for nuclear power allowed application of the KLT-40C plant for a floating power unit of a nuclear co-generation station. (author)

Basic economic principles of road pricing: From theory to applications

NARCIS (Netherlands)

Rouwendal, J.; Verhoef, E.T.

2006-01-01

This paper presents, a non-technical introduction to the economic principles relevant for transport pricing design and analysis. We provide the basic rationale behind pricing of externalities, discuss why simple Pigouvian tax rules that equate charges to marginal external costs are not optimal in

Basic principles of taxation of small-scale enterprises in the Russian Federation

OpenAIRE

Khodyreva Viktoriia Andreevna

2015-01-01

This research is devoted to general principles of taxation of small-scale enterprises. Development of small-scale enterprises is one of the most important lines of tax policy in Russian Federation. The development of principles of taxation is important while forming a strong state system of taxation. In this work basic principles and some specific are provided. This work is of great scientific interest to law students, graduates, teachers and other persons interested in law and particularly i...

Introduction to basic immunological methods : Generalities, Principles, Protocols and Variants of basic protocols

International Nuclear Information System (INIS)

Mejri, Naceur

2013-01-01

This manuscript is dedicated to student of biological sciences. It provides the information necessary to perform practical works, the most commonly used in immunology. During my doctoral and post-doctoral periods, panoply of methods was employed in diverse subjects in my research. Technical means used in my investigations were diverse enough that i could extract a set of techniques that cover most the basic immunological methods. Each chapter of this manuscript contains a fairly complete description of immunological methods. In each topic the basic protocol and its variants were preceded by background information provided in paragraphs concerning the principle and generalities. The emphasis is placed on describing situations in which each method and its variants were used. These basic immunological methods are useful for students and even researchers studying the immune system of human, nice and other species. Different subjects showed not only detailed protocols but also photos or/and shemas used as support to illustrate some knowledge or practical knowledge. I hope that students will find this manual interesting, easy to use contains necessary information to acquire skills in immunological practice. (Author)

Basic environmental principles for the promotion of clean and efficient energy

International Nuclear Information System (INIS)

Hanmer, R.; Connor-Lajambe, H.

1994-01-01

The purpose of this paper is to reiterate what might be considered basic principles for promoting clean and efficient energy. These principles have very important implications for the design of energy supply and transportation facilities, but they go far beyond that to unify such design with the design, use and maintenance of many other types of facilities and goods. These principles also affect the way we consider energy security in the context of sustainable development. In annex, this paper presents the recommendation of the Council, with a list of environmentally favourable energy options. (TEC). 2 refs., Annex

Embarrassment as a key to understanding cultural differences. Basic principles of cultural analysis

DEFF Research Database (Denmark)

Bouchet, Dominique

1995-01-01

I introduce here the principles I use in my investigation of intercultural marketing and management. I explain how I discovered them, and show how they spring from a theoretical understanding of the dynamic of cultural differences. One of the basic methodological principles for my analysis...

Photovoltaic technology diffusion. Contact and interact

International Nuclear Information System (INIS)

Kruijsen, J.

1999-09-01

How can the diffusion of photovoltaic technologies be advanced? Photovoltaics convert light into electrical energy. They are environmentally friendly, reliable and have minimal maintenance requirements. Up to now, their introduction into the electricity market has been dominated by a technology push perspective. However, this has not yet resulted in a large-scale implementation. This thesis describes a network approach to advance photovoltaic diffusion and presents four guiding principles intended for the parties concerned: those who supply the photovoltaic technologies (e.g., developers of photovoltaic cells); those who integrate photovoltaic technologies into (new) product systems (e.g., engineering firms); the users of photovoltaic systems (e.g., housing corporations); and those who stimulate the use of photovoltaics (e.g., policymakers, subsidisers, branch organisations, financial institutes, and NGOs). refs

Some Basic Principles of Fish processing in Nigeria

OpenAIRE

J.F.N. Abowei; C.C. Tawari

2011-01-01

Some basic principles offish processing in Nigeria is reviewed to provide information for fish culturist to effectively manage the processing of their products. Processing of fish into forms for human consumption or suitable to be used as a supplement in animal food has been neglected in fish culture practices. This may be due to the high technology required in some of the processes and the fact that those involved in actual fish production are ignorant of the different processing methods. In...

THE BASIC PRINCIPLES OF RESEARCH IN NEUROEDUCATION STUDIES

OpenAIRE

Ali Nouri

2016-01-01

The present paper assembles contributions from the areas of education, psychology, cognitive science, and of course, neuroeducation itself to introduce the basic principles of research in the field of neuroeducation studies. It is particularly important, as such it is a useful way to justify researchers about what neuroeducation as a specific domain do that no other field can do as well or cannot do at all. Based on the literature reviewed, neuroeducational research can be understood as an inte...

Effects of an additional small group discussion to cognitive achievement and retention in basic principles of bioethics teaching methods

Directory of Open Access Journals (Sweden)

Dedi Afandi

2009-03-01

Full Text Available Aim The place of ethics in undergraduate medical curricula is essential but the methods of teaching medical ethics did not show substantial changes. “Basic principles of bioethics” is the best knowledge to develop student’s reasoning analysis in medical ethics In this study, we investigate the effects of an additional small group discussion in basic principles of bioethics conventional lecture methods to cognitive achievement and retention. This study was a randomized controlled trial with parallel design. Cognitive scores of the basic principles of bioethics as a parameter was measured using basic principles of bioethics (Kaidah Dasar Bioetika, KDB test. Both groups were attending conventional lectures, then the intervention group got an additional small group discussion.Result Conventional lectures with or without small group discussion significantly increased cognitive achievement of basic principles of bioethics (P= 0.001 and P= 0.000, respectively, and there were significant differences in cognitive achievement and retention between the 2 groups (P= 0.000 and P= 0.000, respectively.Conclusion Additional small group discussion method improved cognitive achievement and retention of basic principles of bioethics. (Med J Indones 2009; 18: 48-52Keywords: lecture, specification checklist, multiple choice questions

Basic principles of fracture treatment in children.

Science.gov (United States)

Ömeroğlu, Hakan

2018-04-01

This review aims to summarize the basic treatment principles of fractures according to their types and general management principles of special conditions including physeal fractures, multiple fractures, open fractures, and pathologic fractures in children. Definition of the fracture is needed for better understanding the injury mechanism, planning a proper treatment strategy, and estimating the prognosis. As the healing process is less complicated, remodeling capacity is higher and non-union is rare, the fractures in children are commonly treated by non-surgical methods. Surgical treatment is preferred in children with multiple injuries, in open fractures, in some pathologic fractures, in fractures with coexisting vascular injuries, in fractures which have a history of failed initial conservative treatment and in fractures in which the conservative treatment has no/little value such as femur neck fractures, some physeal fractures, displaced extension and flexion type humerus supracondylar fractures, displaced humerus lateral condyle fractures, femur, tibia and forearm shaft fractures in older children and adolescents and unstable pelvis and acetabulum fractures. Most of the fractures in children can successfully be treated by non-surgical methods.

Solar photovoltaics for development applications

Energy Technology Data Exchange (ETDEWEB)

Shepperd, L.W. [Florida Solar Energy Center, Cape Canaveral, FL (United States); Richards, E.H. [Sandia National Labs., Albuquerque, NM (United States)

1993-08-01

This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

Predicting suitable optoelectronic properties of monoclinic VON semiconductor crystals for photovoltaics using accurate first-principles computations

KAUST Repository

Harb, Moussab

2015-01-01

Using accurate first-principles quantum calculations based on DFT (including the perturbation theory DFPT) with the range-separated hybrid HSE06 exchange-correlation functional, we predict essential fundamental properties (such as bandgap, optical absorption coefficient, dielectric constant, charge carrier effective masses and exciton binding energy) of two stable monoclinic vanadium oxynitride (VON) semiconductor crystals for solar energy conversion applications. In addition to the predicted band gaps in the optimal range for making single-junction solar cells, both polymorphs exhibit relatively high absorption efficiencies in the visible range, high dielectric constants, high charge carrier mobilities and much lower exciton binding energies than the thermal energy at room temperature. Moreover, their optical absorption, dielectric and exciton dissociation properties are found to be better than those obtained for semiconductors frequently utilized in photovoltaic devices like Si, CdTe and GaAs. These novel results offer a great opportunity for this stoichiometric VON material to be properly synthesized and considered as a new good candidate for photovoltaic applications.

Predicting suitable optoelectronic properties of monoclinic VON semiconductor crystals for photovoltaics using accurate first-principles computations

KAUST Repository

Harb, Moussab

2015-08-26

Using accurate first-principles quantum calculations based on DFT (including the perturbation theory DFPT) with the range-separated hybrid HSE06 exchange-correlation functional, we predict essential fundamental properties (such as bandgap, optical absorption coefficient, dielectric constant, charge carrier effective masses and exciton binding energy) of two stable monoclinic vanadium oxynitride (VON) semiconductor crystals for solar energy conversion applications. In addition to the predicted band gaps in the optimal range for making single-junction solar cells, both polymorphs exhibit relatively high absorption efficiencies in the visible range, high dielectric constants, high charge carrier mobilities and much lower exciton binding energies than the thermal energy at room temperature. Moreover, their optical absorption, dielectric and exciton dissociation properties are found to be better than those obtained for semiconductors frequently utilized in photovoltaic devices like Si, CdTe and GaAs. These novel results offer a great opportunity for this stoichiometric VON material to be properly synthesized and considered as a new good candidate for photovoltaic applications.

41 CFR 102-85.25 - What is the basic principle governing OAs?

Science.gov (United States)

2010-07-01

... Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 85-PRICING POLICY FOR OCCUPANCY IN GSA SPACE Pricing Policy-General § 102-85.25 What is the basic principle...

Principles of interaction of ionizing radiation with matter and basic radiation chemistry processes

International Nuclear Information System (INIS)

Santar, I.; Bednar, J.

1976-01-01

The basic principles are given of the interaction of ionizing radiation with matter and the main trends are pointed out in radiation chemistry. A brief characteristics is given of the basic radiation chemical processes in gases and in the condensed phase, namely in water and in organic substances. (B.S.)

Plastic photovoltaic devices

OpenAIRE

Niyazi Serdar Sariciftci

2004-01-01

The development of organic, polymer-based photovoltaic elements has introduced the possibility of obtaining cheap and easy-to-produce energy from light. Photoinduced electron transfer from donor-type semiconducting polymers onto acceptor-type polymers or molecules, such as C60, is the basic phenomenon utilized in these photovoltaic devices. This process mimics the early photo-effects in natural photosynthesis. The polymeric semiconductors combine the photoelectrical properties of inorganic se...

Methods and analysis of factors impact on the efficiency of the photovoltaic generation

International Nuclear Information System (INIS)

Li Tianze; Zhang Xia; Jiang Chuan; Hou Luan

2011-01-01

First of all, the thesis elaborates two important breakthroughs which happened In the field of the application of solar energy in the 1950s.The 21st century the development of solar photovoltaic power generation will have the following characteristics: the continued high growth of industrial development, the significantly reducing cost of the solar cell, the large-scale high-tech development of photovoltaic industries, the breakthroughs of the film battery technology, the rapid development of solar PV buildings integration and combined to the grids. The paper makes principles of solar cells the theoretical analysis. On the basis, we study the conversion efficiency of solar cells, find the factors impact on the efficiency of the photovoltaic generation, solve solar cell conversion efficiency of technical problems through the development of new technology, and open up new ways to improve the solar cell conversion efficiency. Finally, the paper connecting with the practice establishes policies and legislation to the use of encourage renewable energy, development strategy, basic applied research etc.

Methods and analysis of factors impact on the efficiency of the photovoltaic generation

Science.gov (United States)

Tianze, Li; Xia, Zhang; Chuan, Jiang; Luan, Hou

2011-02-01

First of all, the thesis elaborates two important breakthroughs which happened In the field of the application of solar energy in the 1950s.The 21st century the development of solar photovoltaic power generation will have the following characteristics: the continued high growth of industrial development, the significantly reducing cost of the solar cell, the large-scale high-tech development of photovoltaic industries, the breakthroughs of the film battery technology, the rapid development of solar PV buildings integration and combined to the grids. The paper makes principles of solar cells the theoretical analysis. On the basis, we study the conversion efficiency of solar cells, find the factors impact on the efficiency of the photovoltaic generation, solve solar cell conversion efficiency of technical problems through the development of new technology, and open up new ways to improve the solar cell conversion efficiency. Finally, the paper connecting with the practice establishes policies and legislation to the use of encourage renewable energy, development strategy, basic applied research etc.

Central station market development strategies for photovoltaics

Science.gov (United States)

1980-01-01

Federal market development strategies designed to accelerate the market penetration of central station applications of photovoltaic energy system are analyzed. Since no specific goals were set for the commercialization of central station applications, strategic principles are explored which, when coupled with specific objectives for central stations, can produce a market development implementation plan. The study includes (1) background information on the National Photovoltaic Program, photovoltaic technology, and central stations; (2) a brief market assessment; (3) a discussion of the viewpoints of the electric utility industry with respect to solar energy; (4) a discussion of commercialization issues; and (5) strategy principles. It is recommended that a set of specific goals and objectives be defined for the photovoltaic central station program, and that these goals and objectives evolve into an implementation plan that identifies the appropriate federal role.

Oncology. Pt. 1. General part, epidemiology - pathogenesis - basic principles of therapy. 2. upd. ed.

International Nuclear Information System (INIS)

Hiddemann, Wolfgang; Bartram Claus R.

2010-01-01

The book Oncology is aimed to communicate the compiled knowledge on tumor development and cancer: fundamental knowledge base, practice related know-how for diagnostics and therapy. Part 1 includes the following chapters: epidemiology and pathogenesis, basic principles of diagnostics, basic principles of therapy, complication of malign growth, tumors in the gastrointestinal tract, female genital carcinomas, kidney and urinary tract carcinomas, respiratory tract and lung carcinomas, carcinomas in the head - neck area, bone and soft tissue carcinomas, pediatric tumors, hematological neoplasm, other carcinomas. The book can be used as reference for clinical work. [de

Real-time Executive for a basic principle simulator

International Nuclear Information System (INIS)

Buerger, L.; Szegi, Zs.; Vegh, E.

1987-09-01

A basic principle simulator for WWER-440 type nuclear power plants is under development in the Central Research Institute for Physics, Budapest. So far the technological models of both to primary and secondary circuits are ready and this paper presents the Real-time Executive and the on-line operating environment which controls the simulator. This executive system contains eight programs and the detailed structure of the data base is presented. The control of the execution of the model programs, their timing and the error recoveries are also discussed. (author) 5 refs

Basic principles for intervention after a nuclear or radiological emergency

International Nuclear Information System (INIS)

Per Hedemann Jensen

1996-01-01

The current status of internationally agreed principles for intervention after a nuclear accident or radiological emergency and the international development of intervention guidance since the Chernobyl accident are reviewed. The experience gained after the Chernobyl accident indicates that the international advice on intervention existing at the time of the Chernobyl accident was not fully understood by decision makers neither in Western Europe nor in the former USSR and that the guidance failed to address adequately the difficult social problems which can arise after a serious nuclear accident. The radiation protection philosophy of today distinguishes between practices and interventions. The radiological protection system of intervention includes justification of the protective action and optimization of the level of protection achieved by that action. Dose limits do not apply in intervention situations. The inputs to justification and optimization studies include factors that are related to radiological protection, whereas the final decisions on introduction of countermeasures would also depend on other factors. The basic principles for intervention as recommended by international organisations are discussed in detail and the application of the principles on a generic basis is illustrated for long-term protective actions. The concepts of intervention level, operational intervention level and action level are presented and the relation between these quantities is illustrated. The numerical guidance on intervention in a nuclear accident or radiological emergency or a chronic exposure situation given by ICRP, IAEA and in the Basic Safety Standards is presented. (author)

Photovoltaic product directory and buyers guide

Energy Technology Data Exchange (ETDEWEB)

Watts, R.L.; Smith, S.A.; Mazzucchi, R.P.

1981-06-01

Basic information on photovoltaic conversion technology is provided for those unfamiliar with the field. Various types of photovoltaic products and systems currently available off-the-shelf are described. These include products without batteries, battery chargers, power packages, home electric systems, and partial systems. Procedures are given for designing a photovoltaic system from scratch. A few custom photovoltaic systems are described, and a list is compiled of photovoltaic firms which can provide custom systems. Guidance is offered for deciding whether or not to use photovoltaic products. A variety of installations are described and their performance is appraised by the owners. Information is given on various financial incentives available from state and federal governments. Sources of additional information on photovoltaics are listed. A matrix is provided indicating the sources of various types of photovoltaic products. The addresses of suppliers are listed. (LEW)

Basic principles of Hasse diagram technique in chemistry.

Science.gov (United States)

Brüggemann, Rainer; Voigt, Kristina

2008-11-01

Principles of partial order applied to ranking are explained. The Hasse diagram technique (HDT) is the application of partial order theory based on a data matrix. In this paper, HDT is introduced in a stepwise procedure, and some elementary theorems are exemplified. The focus is to show how the multivariate character of a data matrix is realized by HDT and in which cases one should apply other mathematical or statistical methods. Many simple examples illustrate the basic theoretical ideas. Finally, it is shown that HDT is a useful alternative for the evaluation of antifouling agents, which was originally performed by amoeba diagrams.

ECOLOGICAL LIFESTYLE, THE BASIC PRINCIPLES OF THE OPERATIONAL DEFINITION OF THE CONCEPT

Directory of Open Access Journals (Sweden)

Olesya Nikolaevna Tarasova

2015-12-01

Full Text Available Based on the analysis of approaches to the empirical study of the environmental aspects of lifestyle are presented the basic principles that distinguish ecological way of life off the set of environmental practices that need to be taken into account in empirical measurement, namely: systematicity, conceptuality, contextual conformity and processuality. The article provides a theoretical basis and operational definition as an ecological way of life in general and the principles that distinguish it from other concepts of environmental sociology.

Basic principle of cone beam computed tomography

International Nuclear Information System (INIS)

Choi, Yong Suk; Kim, Gyu Tae; Hwang, Eui Hwan

2006-01-01

The use of computed tomography for dental procedures has increased recently. Cone beam computed tomography(CBCT) systems have been designed for imaging hard tissues of the dentomaxillofacial region. CBCT is capable of providing high resolution in images of high diagnostic quality. This technology allows for 3-dimensional representation of the dentomaxillofacial skeleton with minimal distortion, but at lower equipment cost, simpler image acquisition and lower patient dose. Because this technology produces images with isotropic sub-millimeter spatial resolution, it is ideally suited for dedicated dentomaxillofacial imaging. In this paper, we provide a brief overview of cone beam scanning technology and compare it with the fan beam scanning used in conventional CT and the basic principles of currently available CBCT systems

A novel application for concentrator photovoltaic in the field of agriculture photovoltaics

Science.gov (United States)

Liu, Luqing; Guan, Chenggang; Zhang, Fangxin; Li, Ming; Lv, Hui; Liu, Yang; Yao, Peijun; Ingenhoff, Jan; Liu, Wen

2017-09-01

Agriculture photovoltaics is a trend setting area which has already led to a new industrial revolution. Shortage of land in some countries and desertification of land where regular solar panels are deployed are some of the major problems in the photovoltaic industry. Concentrator photovoltaics experienced a decline in applicability after the cost erosion of regular solar panels at the end of the last decade. We demonstrate a novel and unique application for concentrator photovoltaics tackling at a same time the issue of conventional photovoltaics preventing the land being used for agricultural purpose where ever solar panels are installed. We leverage the principle of diffractive and interference technology to split the sun light into transmitted wavelengths necessary for plant growth and reflected wavelengths useful for solar energy generation. The technology has been successfully implemented in field trials and sophisticated scientific studies have been undertaken to evaluate the suitability of this technology for competitive solar power generation and simultaneous high-quality plant growth. The average efficiency of the agriculture photovoltaic system has reached more than 8% and the average efficiency of the CPV system is 6.80%.

Basic principles of magnetic resonance imaging in cerebral ischemia and initial clinical experience

International Nuclear Information System (INIS)

Brant-Zawadzki, M.; Solomon, M.; Newton, T.H.; Weinstein, P.; Schmidley, J.; Norman, D.

1985-01-01

The basic principles of magnetic resonance imaging are described and their use in the investigation of cerebral ischemia outlined. A brief account is given of the clinical results of investigation to date

Data presentation in the WWER-440 Basic Principle Simulator

International Nuclear Information System (INIS)

Bota, J.; Gossanyi, A.; Vegh, E.

1986-09-01

At the Central Research Institute for Physics, Budapest, Hungary, a Basic Principle Simulator for WWER-440 nuclear power plants is under development. The input/output subsystem of the simulator is described. This subsystem is a control desk-shaped special periphery representing each main parameter of the model. During development special attention was paid to the hardware support of the controllers as this part of the model is regarded as most time consuming. A short summary on the hardware configuration of the simulator is also presented. (author)

An Embalse nuclear power plant basic principles simulator

International Nuclear Information System (INIS)

Fernandez, Oscar; Galdoz, Erwin; Flury, Celso; Fontanini, Horacio

1989-01-01

A nuclear power plant basic principles simulator is a package of programs that numerically solve the dynamic equations of the simulated plant. This kind of tools is mainly used in the first step of training of operational personnel, to allow mental representation of physical phenomena governing the plant. They are also used for students or professional training, and experienced operators can also improve there performance under abnormal operation situations using the simulator. For the Embalse nuclear power plant, mainly the thermohydraulic behaviour, is simulated. The mathematical model was adapted from MANUVR, a code developed at the Electric Systems and Control Department of the National Atomic Energy Commission (CNEA). (Author) [es

Photovoltaic Cells Improvised With Used Bipolar Junction Transistors

International Nuclear Information System (INIS)

Akintayo, J. A

2002-01-01

The understanding of the underlying principle that the solar cell consists of a p-n junction is exploited to adapt the basic NPN or PNP Bipolar Junction Transistors (BJT) to serve as solar cells. In this mode the in improvised solar cell have employed just the emitter and the base sections with an intact emitter/base junction as the active PN area. The improvised devices tested screened and sorted are wired up in strings, blocks and modules. The photovoltaic modules realised tested as close replica of solar cells with output voltage following insolation level. Further work need be done on the modules to make them generate usable levels of output voltage and current

Photovoltaic Cells and Systems: Current State and Future Trends

OpenAIRE

Hadj Bourdoucen; Joseph A. Jervase; Abdullah Al-Badi; Adel Gastli; Arif Malik

2000-01-01

Photovoltaics is the process of converting solar energy into electrical energy. Any photovoltaic system invariably consists of solar cell arrays and electric power conditioners. Photovoltaic systems are reliable, quiet, safe and both environmentally benign and self-sustaining. In addition, they are cost-effective for applications in remote areas. This paper presents a review of solar system components and integration, manufacturing, applications, and basic research related to photovoltaics. P...

Basic humanitarian principles applicable to non-nationals.

Science.gov (United States)

Goodwin-gill, G S; Jenny, R K; Perruchoud, R

1985-01-01

This article examines the general status in international law of certain fundamental human rights to determine the minimum "no derogation" standards, and then surveys a number of formal agreements between stages governing migration matters, while examining some of the standard-setting work undertaken by the International Labor Organization (ILO) and other institutions. Article 13 of the Universal Declaration of Human Rights, proclaims the right of everyone to leave any country, including his or her own. The anti-discrimination provision is widely drawn and includes national or social origin, birth, or other status. Non-discrimination is frequently the core issue in migration matters; it offers the basis for a principles approach to questions involving non-nationals and their methodological analysis, as well as a standard for the progressive elaboration of institutions and practices. As a general rule, ILO conventions give particular importance to the principle of choice of methods by states for the implementation of standards, as well as to the principle of progressive implementation. Non-discrimination implies equality of opportunity in the work field, inremuneration, job opportunity, trade union rights and benefits, social security, taxation, medical treatment, and accommodation; basic legal guarantees are also matters of concern to migrant workers, including termination of employment, non-renewal of work permits, and expulsion. The generality of human rights is due not because the individual is or is not a member of a partucular group, and claims to such rights are not determinable according to membership, but according to the character of the right in question. The individualized aspect of fundamental human rights requires a case-by-case consideration of claims, and the recognition that to all persons now certain special duties are owed.

Basic Theoretical Principles Pertaining to Thermal Protection of Oil Transformer

Directory of Open Access Journals (Sweden)

O. G. Shirokov

2008-01-01

Full Text Available The paper contains formulation of basic theoretical principles pertaining to thermal protection of an oil transformer in accordance with classical theory of relay protection and theory of diagnostics with the purpose of unification of terminological and analytical information which is presently available in respect of this problem. Classification of abnormal thermal modes of an oil transformer and also algorithms and methods for operation of diagnostic thermal protection of a transformer have been proposed.

The Basic Principles and Methods of the System Approach to Compression of Telemetry Data

Science.gov (United States)

Levenets, A. V.

2018-01-01

The task of data compressing of measurement data is still urgent for information-measurement systems. In paper the basic principles necessary for designing of highly effective systems of compression of telemetric information are offered. A basis of the offered principles is representation of a telemetric frame as whole information space where we can find of existing correlation. The methods of data transformation and compressing algorithms realizing the offered principles are described. The compression ratio for offered compression algorithm is about 1.8 times higher, than for a classic algorithm. Thus, results of a research of methods and algorithms showing their good perspectives.

Distributed photovoltaic grid transformers

CERN Document Server

Shertukde, Hemchandra Madhusudan

2014-01-01

The demand for alternative energy sources fuels the need for electric power and controls engineers to possess a practical understanding of transformers suitable for solar energy. Meeting that need, Distributed Photovoltaic Grid Transformers begins by explaining the basic theory behind transformers in the solar power arena, and then progresses to describe the development, manufacture, and sale of distributed photovoltaic (PV) grid transformers, which help boost the electric DC voltage (generally at 30 volts) harnessed by a PV panel to a higher level (generally at 115 volts or higher) once it is

Regulatory policy governing cadmium-telluride photovoltaics: A case study contrasting life cycle management with the precautionary principle

International Nuclear Information System (INIS)

Sinha, Parikhit; Kriegner, Christopher J.; Schew, William A.; Kaczmar, Swiatoslav W.; Traister, Matthew; Wilson, David J.

2008-01-01

Market projections for cadmium-telluride (CdTe) thin-film photovoltaics (PV) are tempered by global environmental policies based on the precautionary principle which restrict electronic products containing cadmium, a known human carcinogen. An alternative to the precautionary principle is life cycle management, which involves manufacturers assuming product stewardship from beginning to end of product life. Both approaches have the aim of minimizing environmental contamination, but attempt to do so in different ways. Restrictions on electronic products containing cadmium by the precautionary principle-based restriction of hazardous substances (RoHS) directive in the European Union and a similar policy in China are presented, relative to their potential impact on CdTe PV. Life cycle environmental risks with respect to potential release of cadmium to the environment are also presented for routine operation of CdTe PV panels, potential catastrophic release of cadmium from a residential fire, and at the end of the product life. There is negligible risk of environmental cadmium contamination during routine operation and insignificant risk during catastrophic exposure events such as fire. At the end of the product life, risks of contamination are minimized by take-back programs that may be paid for by insurance premiums incorporated into the cost of the product. Therefore, policies based on the precautionary principle that could potentially ban the product based on its cadmium content may not be warranted

Regulatory policy governing cadmium-telluride photovoltaics: A case study contrasting life cycle management with the precautionary principle

Energy Technology Data Exchange (ETDEWEB)

Sinha, Parikhit; Kriegner, Christopher J.; Schew, William A.; Kaczmar, Swiatoslav W.; Traister, Matthew; Wilson, David J. [O' Brien and Gere, Ecological Sciences, E. 512 Township Line Road, Two Valley Square, Suite 120, Blue Bell, PA 19422 (United States)

2008-01-15

Market projections for cadmium-telluride (CdTe) thin-film photovoltaics (PV) are tempered by global environmental policies based on the precautionary principle which restrict electronic products containing cadmium, a known human carcinogen. An alternative to the precautionary principle is life cycle management, which involves manufacturers assuming product stewardship from beginning to end of product life. Both approaches have the aim of minimizing environmental contamination, but attempt to do so in different ways. Restrictions on electronic products containing cadmium by the precautionary principle-based restriction of hazardous substances (RoHS) directive in the European Union and a similar policy in China are presented, relative to their potential impact on CdTe PV. Life cycle environmental risks with respect to potential release of cadmium to the environment are also presented for routine operation of CdTe PV panels, potential catastrophic release of cadmium from a residential fire, and at the end of the product life. There is negligible risk of environmental cadmium contamination during routine operation and insignificant risk during catastrophic exposure events such as fire. At the end of the product life, risks of contamination are minimized by take-back programs that may be paid for by insurance premiums incorporated into the cost of the product. Therefore, policies based on the precautionary principle that could potentially ban the product based on its cadmium content may not be warranted. (author)

PET/TAC: Basic principles, physiological variants and artifacts

International Nuclear Information System (INIS)

Jimenez V, A.M.

2007-01-01

This presentation is about the basic principles, physiologic variants and devices that work in the PET/TAC technique. Next the conclusions obtained in the same one are presented: For a correct evaluation of the PET/TAC images with FDG is necessary the knowledge of the image acquisition technique, as well as of the physiologic distribution of the FDG, variants of the normality, benign causes of captation and more frequent devices. The introduction of this hybrid procedure allows the correct anatomical localization and identification of the deposits of FDG largely avoiding false or doubtful interpretations, but it can also originate not specific devices existent in the conventional PET. The previous knowledge of the possible devices will make possible in certain cases its elimination and in other its identification avoiding incorrect interpretations. (Author)

Practical Handbook of Photovoltaics. Fundamentals and Applications

International Nuclear Information System (INIS)

Markvart, T.; Castaner, L.

2003-01-01

As part of the growing sustainable and renewable energy movement, the design, manufacture and use of photovoltaic devices is increasing in pace and frequency. This Handbook will be a 'benchmark' publication for those involved in the design, manufacture and use of these devices. It covers the principles of solar cell function, the raw materials, photovoltaic systems, standards, calibration, testing, economics and case studies. The editors have assembled a cast of internationally-respected contributors from industry and academia. The report is essential reading for: Physicists, electronic engineers, designers of systems, installers, architects, policy-makers relating to photovoltaics

The photovoltaic: channels, markets and outlooks

International Nuclear Information System (INIS)

Jourde, P.

2005-01-01

The photovoltaic market is in expansion with a good energy, political and environmental context. It needs meanwhile to realize developments in the storage domain and in the cost of connexion to the network. To illustrate these conclusions this paper discusses the following chapters: the solar energy, the principle and the channels of the photovoltaic, the applications (autonomous electrification and houses connected to the network) and the markets, a state of the art and the outlooks. (A.L.B.)

Three-dimensional attached viscous flow basic principles and theoretical foundations

CERN Document Server

Hirschel, Ernst Heinrich; Kordulla, Wilhelm

2014-01-01

Viscous flow is usually treated in the frame of boundary-layer theory and as a two-dimensional flow. At best, books on boundary layers provide the describing equations for three-dimensional boundary layers, and solutions only for certain special cases.   This book presents the basic principles and theoretical foundations of three-dimensional attached viscous flows as they apply to aircraft of all kinds. Though the primary flight speed range is that of civil air transport vehicles, flows past other flying vehicles up to hypersonic speeds are also considered. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers, as this wider scope is necessary in view of the theoretical and practical problems that have to be overcome in practice.   The specific topics covered include weak, strong, and global interaction; the locality principle; properties of three-dimensional viscous flows; thermal surface effects; characteristic properties; wall compatibility con...

Fundamentals of Grid Connected Photo-Voltaic Power Electronic Converter Design

OpenAIRE

Evju, Svein Erik

2007-01-01

In this master thesis the basic theory of grid connected photo-voltaic systems is explained, giving an introduction to the different aspects of system design. Starting with a look at the standards concerning grid connection of distributed resources, and working its way through how the photo-voltaic cells work, to how photo-voltaic modules with electrical converters can be arranged. Some different converter topologies suitable for use with photo-voltaics are found, and based on these topologie...

Solar Process Heat Basics | NREL

Science.gov (United States)

Process Heat Basics Solar Process Heat Basics Commercial and industrial buildings may use the same solar technologies-photovoltaics, passive heating, daylighting, and water heating-that are used for residential buildings. These nonresidential buildings can also use solar energy technologies that would be

Basic design principles of colorimetric vision systems

Science.gov (United States)

Mumzhiu, Alex M.

1998-10-01

Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

太阳能光伏提水系统在海南农业中的应用%Application of Solar Photovoltaic Water Pumping System in Agriculture in Hainan

Institute of Scientific and Technical Information of China (English)

杨志斌; 林青青; 黎勇; 陈建梅; 周学东; 于向春

2013-01-01

The present situation of Hainan agricultural irrigation is analyzed. Basic principle, necessity and feasibility of application about solar photovoltaic water pumping system are introduced. It is very important to develop solar photovoltaic agriculture of Hainan.%分析海南农业灌溉的现状,阐述太阳能光伏提水系统基本原理及其在海南农业应用的必要性和可行性,对海南发展光伏农业具有重要的指导意义.

The Research of Sun Tracking Photovoltaic Power Generation System%太阳跟踪式光伏发电系统的研究

Institute of Scientific and Technical Information of China (English)

郭志冬; 潘晓贝

2011-01-01

为了提高对太阳能的利用率,最大限度地获得输出功率,目前普遍采用太阳跟踪式的光伏发电方式.介绍了常见的太阳跟踪式光伏发电系统的基本原理、结构及其实现.%In order to improve the utilization of solar energy,and to obtain the maximum output power,sun-tracking photovoltaic power generation is used widely now.This paper describes the basic principles of common sun tracking photovoltaic power generation systems,system architecture and its implementation.

Photovoltaics; L'electricite photovoltaique

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-06-15

This road-map proposes by the Group Total aims to inform the public on the photovoltaics. It presents the principles and the applications, the issues and the current technology, the challenges and the Group Total commitment in the domain. (A.L.B.)

Differences between application of some basic principles of quantum mechanics on atomic and mesoscopic levels

OpenAIRE

Nikulov, Alexey

2005-01-01

Formalism of the quantum mechanics developed for microscopic (atomic) level comes into collision with some logical difficulties on mesoscopic level. Some fundamental differences between application of its basic principles on microscopic and mesoscopic levels are accentuated.

Basic Principles of Industrial Electric Power Network Computer Aided Design and Engineering

Directory of Open Access Journals (Sweden)

M. I. Fursanov

2012-01-01

Full Text Available A conceptual model for a computer aided design and engineering system has been developed in the paper. The paper presents basic automation process principles including a graphical representation   network and calculation results, convenient user interface, automatic mode calculation, selection of transformer rated power and cross-section area of wires. The developed algorithm and program make it possible to save time and improve quality of project implementation.

Doing it right – or are we? Basic principles in the acquisition, care of ...

African Journals Online (AJOL)

The photograph collection of the University Archives, University of KwaZulu-Natal (Pietermaritzburg Campus), is introduced as an example of a collection. Basic principles for the acquisition, storage, provision of access, and handling and use of photographs, are presented. The applicability of 'acceptable' American and ...

The presence of communication in the basic organizational principles of the University of Zulia towards the student sector

Directory of Open Access Journals (Sweden)

Laura Castellano Ramírez

2006-11-01

Full Text Available This article is centered in detecting the presence of comunication towards the student sector, like a formal element in the redaccion of the organization basic principles (OBP of La Universidad del Zulia, such as Mision, Vision, Values, Polítics, Objectives and Strategies. Starting from the theoric approach of that the OBP conform the basic component of the Corporative Identity, in wish are rised the other three: the organizational beheivier, the simbology or visual identity and the comunication. Through the documentary research it has concluded that the communication towards the student community is not taken in count in the redaction of the basic principles, it is mentioned only in the comunicational politic but in a very general way.

Basic principles of molecular effects of irradiation.

Science.gov (United States)

Selzer, Edgar; Hebar, Alexandra

2012-02-01

In order to understand the consequences of radiation a thorough understanding of the radiobiological mechanisms of the molecular up to the clinical level is of importance. Radiobiology therefore combines the basic principles of physics as well as biology and medicine and is concerned with the action of radiation from the subcellular level up to the living organism. Topics of interest and relevance are covered in much more broadness as is possible in the short following article in the literature to which the interested reader is referred to. Classical books in this field were written by Steel et al. (1989) as well as by Hall (1994). Topics usually covered by radiobiological reviews are the classification of different types of radiation, cell cycle dependency of radiation effects, types of radiation damage and cell death, dose response curves, measurement of radiation damage, the oxygen effect, relative biological effectiveness, the influence of dose rate, and several other important research areas. This short overview will concentrate on a subset of radiobiological topics of high importance and relative novelty.

Photovoltaic. Solar electricity, a sustainable source of energy

International Nuclear Information System (INIS)

Stryi-Hipp, Gerhard; Loyen, Richard; Knaack, Jan; Chrometzka, Thomas

2008-06-01

This German publication outlines that solar energy is now essential to any sustainable energy mix, and describes the operation principle of solar photovoltaic energy production. It describes how it can be applied for the production of electricity in isolated areas, and for individual housing as well as commercial buildings, and presents the concept of ground-based solar plants. The next part discusses the development of the photovoltaic market (its huge potential, its world size) and indicates the different associated arrangements of financial support or subsidy. It also discusses how photovoltaic markets can be developed, and proposes an overview of the German model

Bulgarian National System for Ionization Radiation Control in the Biosphere. Three basic principles, main features and specific aspects of application

International Nuclear Information System (INIS)

Vasilev, G.

1994-01-01

Some problems concerned with the structure of the national system for radiation control and 'de facto' situation in Bulgaria are outlined. The following three basic principles of such a system are discussed: 1. Radioecological principle; 2. Regulatory principle. Maximum permissible contamination level and exposure; 3. Control principle. Local variations of natural radiation background. 1 tab., 12 refs

Design and construction of a basic principle simulator: an experiment

International Nuclear Information System (INIS)

Fernandez, O.; Galdoz, E.; Flury, C.; Fontanini, H.; Maciel, F.; Rovere, L.; Carpio, R.

1992-01-01

This paper describes activities developed over design and building of a Basic Principle Simulator for nuclear power plants. This simulator has been developed in Process Control Division of Bariloche Atomic Center, Argentina. This project was sponsored jointly by CNEA and Atomic Energy International Organization, through the United Nations Program for Development. The paper specially emphasizes aspects like: architecture design methodology of real time simulators; graphic environment and interfaces design for users and instructor interaction, and for display information; test and validation of the used models; and human resources formation. Finally describes the actual implementation of the simulator to be used in Embalse Nuclear Power Plant. (author)

An assessment of adherence to basic ecological principles by payments for ecosystem service projects.

Science.gov (United States)

Prager, C M; Varga, A; Olmsted, P; Ingram, J C; Cattau, M; Freund, C; Wynn-Grant, R; Naeem, S

2016-08-01

Programs and projects employing payments for ecosystem service (PES) interventions achieve their objectives by linking buyers and sellers of ecosystem services. Although PES projects are popular conservation and development interventions, little is known about their adherence to basic ecological principles. We conducted a quantitative assessment of the degree to which a global set of PES projects adhered to four ecological principles that are basic scientific considerations for any project focused on ecosystem management: collection of baseline data, identification of threats to an ecosystem service, monitoring, and attention to ecosystem dynamics or the formation of an adaptive management plan. We evaluated 118 PES projects in three markets-biodiversity, carbon, and water-compiled using websites of major conservation organizations; ecology, economic, and climate-change databases; and three scholarly databases (ISI Web of Knowledge, Web of Science, and Google Scholar). To assess adherence to ecological principles, we constructed two scientific indices (one additive [ASI] and one multiplicative [MSI]) based on our four ecological criteria and analyzed index scores by relevant project characteristics (e.g., sector, buyer, seller). Carbon-sector projects had higher ASI values (P < 0.05) than water-sector projects and marginally higher ASI scores (P < 0.1) than biodiversity-sector projects, demonstrating their greater adherence to ecological principles. Projects financed by public-private partnerships had significantly higher ASI values than projects financed by governments (P < 0.05) and marginally higher ASI values than those funded by private entities (P < 0.1). We did not detect differences in adherence to ecological principles based on the inclusion of cobenefits, the spatial extent of a project, or the size of a project's budget. These findings suggest, at this critical phase in the rapid growth of PES projects, that fundamental ecological principles should be

Basic principles of concrete structures

CERN Document Server

Gu, Xianglin; Zhou, Yong

2016-01-01

Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compa...

Photovoltaic module parameters acquisition model

Energy Technology Data Exchange (ETDEWEB)

Cibira, Gabriel, E-mail: cibira@lm.uniza.sk; Koščová, Marcela, E-mail: mkoscova@lm.uniza.sk

2014-09-01

Highlights: • Photovoltaic five-parameter model is proposed using Matlab{sup ®} and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model.

Photovoltaic module parameters acquisition model

International Nuclear Information System (INIS)

Cibira, Gabriel; Koščová, Marcela

2014-01-01

Highlights: • Photovoltaic five-parameter model is proposed using Matlab ® and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model

Cost-Benefit Analysis of a Biomass Power Plant in Morocco and a Photovoltaic Installation in Algeria

International Nuclear Information System (INIS)

Galan, A.; Gonzalez Leal, J.; Varela, M.

1999-01-01

This report presents an overview of cost-benefit analysis general methodology, describing its principles and basic characteristics. This methodology was applied to two case studies analyzed in the project INTERSUDMED, one biomass power plant fed by energy crops in El Hajeb (Morocco) and the other a photovoltaic installation in Djanet (Algeria). Both cases have been selected among the ones analyzed in the INTERSUDMED Project because of their interesting social implications and possible alternatives, that make them most suitable for cost-benefit analysis application. Finally, this report addresses the conclusions of both studies and summarizes the most relevant obtained results. (Author) 13 refs

Cost-Benefit Analysis of a Biomass Power Plant in Morocco and a Photovoltaic Installation in Algeria

Energy Technology Data Exchange (ETDEWEB)

Galan, A.; Gonzalez Leal, J.; Varela, M.

1999-07-01

This report presents an overview of cost-benefit analysis general methodology, describing its principles and basic characteristics. This methodology was applied to two case studies analyzed in the project INTERSUDMED, one biomass power plant fed by energy crops in El Hajeb (Morocco) and the other a photovoltaic installation in Djanet (Algeria). Both cases have been selected among the ones analyzed in the INTERSUDMED Project because of their interesting social implications and possible alternatives, that make them most suitable for cost-benefit analysis application. Finally, this report addresses the conclusions of both studies and summarizes the most relevant obtained results. (Author) 13 refs.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

Science.gov (United States)

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

Monocrystalline silicon solar cells applied in photovoltaic system

OpenAIRE

L.A. Dobrzański; A. Drygała; M. Giedroć; M. Macek

2012-01-01

Purpose: The aim of the paper is to fabricate the monocrystalline silicon solar cells using the conventional technology by means of screen printing process and to make of them photovoltaic system.Design/methodology/approach: The investigation of current – voltage characteristic to determinate basic electrical properties of monocrystalline silicon solar cells were investigated under Standard Test Condition. Photovoltaic module was produced from solar cells with the largest short-circuit curren...

UPDATING THE BASIC PRINCIPLES OF PROJECT EDUCATION TECHNOLOGY IN FUTURE MUSIC TEACHERS’ VOCAL AND CHORAL TRAINING

Directory of Open Access Journals (Sweden)

Liang Haiye

2017-04-01

Full Text Available The article is devoted to characterizing features of implementing project technology into future music teachers’ vocal and choral training. The analysis of scientific papers of outstanding scientists in philosophy, psychology, and art education, which deal with modern directions of using project technology, highlight its role in art education process. A methodological base is supported by considering contemporary scientific researches, in particular the theory and methodology of musical studies in accordance with forming students’ independence in the process of solving educational problems by means of project technology; developing principles of students’ professional training optimization on the basis of project activity; innovative development of future music teachers’ professional training that gives to the presented material novelty and presentable appearance. Studying future music teachers’ vocal and choral training as a process of constructing that has a special purpose of improving the quality descriptions of educational vocal and choral collective sound functioning, the author of the article discloses the basic principles of implementing project technology into future music teachers’ vocal and choral training. The author of the article pays the special attention to revealing specific features and maintenance of project technology in vocal and choral training of future leaders of child's art groups. An emphasis is made on the following basic factors that influence development of students’ creative individuality: constructing projects of their own becoming; setting aims, tasks, strategies and facilities of vocal and choral work; directing to the result; independent creative activity; presentation, reflection and correction of a project. On the basis of the obtained data the following principles of project technology are put forward in future music teachers’ vocal and choral training: principle of independence; principle of

Basic principles of water-use licensing - Summary of economical and legal expert opinion; Grundlagen Wasserzinspolitik. Zusammenfassung oekonomisches und rechtliches Gutachten

Energy Technology Data Exchange (ETDEWEB)

Walter Ott, O.; Staub, C. [Econcept AG, Zuerich (Switzerland); Leimbacher, J. [Dr. Joerg Leimbacher, Koenizstrasse 43, Berne (Switzerland)

2008-07-01

This final report for the Swiss Federal Office of Energy (SFOE) examines the basic principles behind the definition of monetary compensation for the use of water resources in Switzerland for power generation. The basic aims of such compensation are briefly discussed as are the general economical and technical principles involved. Ownership of the rights pertaining to the use of water resources and the various definitions of licence fees and water taxes and their application are reviewed. Additional remuneration for water storage and appropriation is also discussed.

Experimental toxicology: the basic principles

National Research Council Canada - National Science Library

Anderson, Diana; Conning, D. M

1988-01-01

Principles and methods are discussed in detail, covering experimental design, biochemical issues, animal husbandry, species differences, immunological issues, carcinogenesis, reproductive approaches...

Basic principles on the safety evaluation of the HTGR hydrogen production system

International Nuclear Information System (INIS)

Ohashi, Kazutaka; Nishihara, Tetsuo; Tazawa, Yujiro; Tachibana, Yukio; Kunitomi, Kazuhiko

2009-03-01

As HTGR hydrogen production systems, such as HTTR-IS system or GTHTR300C currently being developed by Japan Atomic Energy Agency, consists of nuclear reactor and chemical plant, which are without a precedent in the world, safety design philosophy and regulatory framework should be newly developed. In this report, phenomena to be considered and events to be postulated in the safety evaluation of the HTGR hydrogen production systems were investigated and basic principles to establish acceptance criteria for the explosion and toxic gas release accidents were provided. Especially for the explosion accident, quantitative criteria to the reactor building are proposed with relating sample calculation results. It is necessary to treat abnormal events occurred in the hydrogen production system as an 'external events to the nuclear plant' in order to classify the hydrogen production system as no-nuclear facility' and basic policy to meet such requirement was also provided. (author)

A CAL Program to Teach the Basic Principles of Genetic Engineering--A Change from the Traditional Approach.

Science.gov (United States)

Dewhurst, D. G.; And Others

1989-01-01

An interactive computer-assisted learning program written for the BBC microcomputer to teach the basic principles of genetic engineering is described. Discussed are the hardware requirements software, use of the program, and assessment. (Author/CW)

FY 2000 report on the demonstrative research for photovoltaic power generation system in Thailand. Demonstrative study on photovoltaic power generation grid-connected system

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

In relation to the demonstrative study of the photovoltaic power system that is planned in Libong island, Thailand, the FY 2000 results were reported. In this R and D, construction/demonstrative operation were planned for a photovoltaic power station with a generation output of 100kW, photovoltaic power system in school facilities, and system for transmitting/distributing power to houses by connecting the power station and power system. In this fiscal year, the field survey was conducted together with the alteration from Yao Yai island, for which the demonstrative study was planned at first, to Libong island. The electric equipment was selected which met the requests from Thailand and the results of the field survey, and the basic design of the photovoltaic power generation/transmission/distribution system was completed. Based on this, the design/manufacture of photovoltaic power generation modules, power control equipment, measuring equipment, etc. were made. At the construction site of photovoltaic power station, construction work such as land formation was conducted. Further, Thai engineers who visited Japan did the following: discussions about power system, presence at test/inspection of photovoltaic power generation modules, visits to photovoltaic power stations, wind power stations, etc. (NEDO)

Photovoltaic Power Systems and the National Electrical Code: Suggested Practices

Energy Technology Data Exchange (ETDEWEB)

None

2002-02-01

This guide provides information on how the National Electrical Code (NEC) applies to photovoltaic systems. The guide is not intended to supplant or replace the NEC; it paraphrases the NEC where it pertains to photovoltaic systems and should be used with the full text of the NEC. Users of this guide should be thoroughly familiar with the NEC and know the engineering principles and hazards associated with electrical and photovoltaic power systems. The information in this guide is the best available at the time of publication and is believed to be technically accurate; it will be updated frequently.

Space and industrial markets for photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Huggins, C.R.; Hardingham, C.M.

2000-07-01

This report presents a review of applications, technologies and markets for photovoltaic power (PV) supplies. A brief history of PV and PV principles is presented, and an overview of the satellite industry is given. Space arrays, space PV, terrestrial PV, and thermo photovoltaics are examined. Targets and constraints in space and terrestrial solar cells are compared, and details of commercial market sizes for given technologies in space and terrestrial PV in 1999, and technical barriers to be overcome towards development of existing products are tabulated. The scope for cross-culture interaction in all aspects of manufacturing, testing and evaluation in the PV devices are considered. (UK)

Space and industrial markets for photovoltaics

International Nuclear Information System (INIS)

Huggins, C.R.; Hardingham, C.M.

2000-01-01

This report presents a review of applications, technologies and markets for photovoltaic power (PV) supplies. A brief history of PV and PV principles is presented, and an overview of the satellite industry is given. Space arrays, space PV, terrestrial PV, and thermo photovoltaics are examined. Targets and constraints in space and terrestrial solar cells are compared, and details of commercial market sizes for given technologies in space and terrestrial PV in 1999, and technical barriers to be overcome towards development of existing products are tabulated. The scope for cross-culture interaction in all aspects of manufacturing, testing and evaluation in the PV devices are considered. (UK)

Photovoltaic conversion of the solar energy

International Nuclear Information System (INIS)

Gordillo G, Gerardo

1998-01-01

In this work, a short description of the basic aspect of the performance of homojunction solar cells and of the technological aspects of the fabrication of low cost thin film solar cells is made. Special emphasis on the historical aspects of the evolution of the conversion efficiency of photovoltaic devices based on crystalline silicon, amorphous silicon, Cd Te and CulnSe 2 is also made. The state of art of the technology of photovoltaic devices and modules is additionally presented. The contribution to the development of high efficiency solar cells and modules, carried out by research centers of universities such us: Stuttgart university (Germany), Stockholm university (Sweden), University of South Florida (USA), university of south gales (Australia), by the national renewable energy laboratory of USA and by research centers of companies such us: Matsushita (Japan), BP-solar (England), Boeing (USA), Arco solar (USA), Siemens (Germany) etc. are specially emphasized. Additionally, a section concerning economical aspect of the photovoltaic generation of electric energy is enclosed. In this section an overview of the evolution of price and world market of photovoltaic system is presented

Can photovoltaic technologies help attain sustainable rural development in Bangladesh?

International Nuclear Information System (INIS)

Biswas, W.K.; Diesendorf, Mark; Bryce, Paul

2004-01-01

The paper explores a model of sustainable rural development and poverty alleviation in Bangladesh, based on the creation of village businesses that sell solar electricity generated from the photovoltaic (PV) technologies. The model shows that the solar electricity business model is in principle economically viable up to the maximum investment available from a micro-credit organisation. Furthermore, the transfer of the existing subsidy from the centralised power system to these businesses would create significant additional income for one-third of the total landless and marginal farmers (LMFs) to meet their income deficits for basic needs. It would also electrify all rural wealthier households. From this additional income, the LMF households employed by the scheme would be able to conserve their environmental resources of animals, land and trees that otherwise are being lost. Appropriate government policies are proposed to disseminate PV technologies

Optical properties of Sb(Se,Te)I and photovoltaic applications

Energy Technology Data Exchange (ETDEWEB)

Tablero, C., E-mail: ctablero@etsit.upm.es

2016-09-05

SbXI (X = Se, Te) are ferroelectric semiconductors that allow a variety of applications including optoelectronic and photovoltaic applications. An analysis of the optical properties is carried out starting from first-principles density-functional theory with orbital-dependent one-electron potentials. To go into the contributions to the optical properties more deeply, the absorption coefficients have been split into inter- and intra-species contributions and into atomic angular momentum contributions. The optical results are used to evaluate the efficiencies when this material is used to absorb sunlight at several sunlight concentrations and the usual radiative and the ferroelectric photovoltaic mechanisms. The results indicate their applicability in photovoltaic devices as absorbent of the solar spectrum with high conversion efficiency. - Highlights: • The SbXI (X = Se, Te) are ferroelectric semiconductors with a high optical absorption. • The absorption coefficients have been split into different contributions to understand the cause of the high absorption. • Using the first-principles results the maximum efficiency of this photovoltaic absorber material has been estimated. • The efficiency of this compound is near the maximum efficiency for single-gap solar cells even using small-width devices. • The coexistence of the R-PV and R-PV effects has been evaluated.

Basic principles of information technology organization in health care institutions.

Science.gov (United States)

Mitchell, J A

1997-01-01

This paper focuses on the basic principles of information technology (IT) organization within health sciences centers. The paper considers the placement of the leader of the IT effort within the health sciences administrative structure and the organization of the IT unit. A case study of the University of Missouri-Columbia Health Sciences Center demonstrates how a role-based organizational model for IT support can be effective for determining the boundary between centralized and decentralized organizations. The conclusions are that the IT leader needs to be positioned with other institutional leaders who are making strategic decisions, and that the internal IT structure needs to be a role-based hybrid of centralized and decentralized units. The IT leader needs to understand the mission of the organization and actively use change-management techniques.

Added values of photovoltaic power systems

International Nuclear Information System (INIS)

2001-03-01

The structure, ownership and operation of electricity systems around the world are changing in response to industry restructuring, the availability of new technologies and increasing environmental awareness. At the same time, many countries have yet to provide basic energy services for their populations, particularly in areas not served by the electricity grid. Large-scale, central power generation and distribution which characterized the electricity industry for much of the 20 th century is being challenged by new technologies, which are cleaner, faster to deploy and better matched to local requirements. Higher values are being placed on ancillary services, such as power system reliability and voltage stability, so that a simple comparison of energy cost is no longer appropriate as a measure of competitiveness. Solar photovoltaic electricity is unique amongst the new energy sources for the wide range of energy and non-energy benefits which can be provided, while the use of photovoltaic power systems as an integral part of a building provides the greatest opportunity for exploiting non-energy benefits and for adding value to the photovoltaic power system. This report documents the potential added values or non-energy benefits photovoltaic power systems can provide, the current state of market development and the key barriers faced by renewable energy technologies generally and photovoltaic power systems in particular. Means by which non-energy benefits may be used to overcome barriers to the use of photovoltaic power systems are then discussed, with specific attention to the use of building integrated photovoltaics. (author)

Added values of photovoltaic power systems

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-15

The structure, ownership and operation of electricity systems around the world are changing in response to industry restructuring, the availability of new technologies and increasing environmental awareness. At the same time, many countries have yet to provide basic energy services for their populations, particularly in areas not served by the electricity grid. Large-scale, central power generation and distribution which characterized the electricity industry for much of the 20{sup th} century is being challenged by new technologies, which are cleaner, faster to deploy and better matched to local requirements. Higher values are being placed on ancillary services, such as power system reliability and voltage stability, so that a simple comparison of energy cost is no longer appropriate as a measure of competitiveness. Solar photovoltaic electricity is unique amongst the new energy sources for the wide range of energy and non-energy benefits which can be provided, while the use of photovoltaic power systems as an integral part of a building provides the greatest opportunity for exploiting non-energy benefits and for adding value to the photovoltaic power system. This report documents the potential added values or non-energy benefits photovoltaic power systems can provide, the current state of market development and the key barriers faced by renewable energy technologies generally and photovoltaic power systems in particular. Means by which non-energy benefits may be used to overcome barriers to the use of photovoltaic power systems are then discussed, with specific attention to the use of building integrated photovoltaics. (author)

Research on the Electrical Characteristics of Photovoltaic Arrays and Corresponding MPPT Simulation

Directory of Open Access Journals (Sweden)

Shengming Li

2013-05-01

Full Text Available Photovoltaic cells, as the primary part of a solar photovoltaic system, are a nonlinear DC power supply related to multiple parameters. The demand of increasing the generating efficiency of photovoltaic cells requires having a good understanding of their electrical characteristics. In this study, the mathematical and physical model of the photovoltaic cells was built by the means of Matlab and Simulink based on the internal principles and equivalent circuits of the photovoltaic cells. After the simulation of such practical and versatile model, it’s found that the nonlinear P-V and I-V characteristics of the photovoltaic cells, with the change of sunlight intensity and temperature, could be accurately reflected by this high simulation precision model. Furthermore, the Maximum Power Point Tracking method was proposed using the logical formula dP/dI=0 of the maximum power point of photovoltaic cells. This method can simply and fast implement the tracking for the maximum power point.

The application of redundancy-related basic safety principles to the 1400 MWE reactor core standby cooling system

International Nuclear Information System (INIS)

Bertrand, R.

1990-01-01

This memorandum shall provide the background for the work of the European Community Commission which is to analyze safety principles relating to redundancy. The redundancy-related basic safety principles applied in French nuclear power plants are the following: . the single-failure criterion, . provisions additional to application of the single-failure criterion. These are mainly provisions made at the design stage to minimize risks associated with common cause failures or the risks of human error which can lead to such failures: - protection against hazards of internal and external origin, - the geographical or physical separation of equipment, - the independence of electrical power supplies and distribution systems, - the additional resources and associated operating procedures making it possible to accommodate total loss of the safety systems. The scope also includes the operating rules which ensure availability of redundant safety-related equipment. The provisions relating to the single-failure criterion are detailed in Basic Safety Rule 1.3.A appended. The application of these principles proposed by the operating organization and accepted by the safety authorities for the design and operation of the standby core cooling system (System RIS) is explained

Basic Principles of Electrical Network Reliability Optimization in Liberalised Electricity Market

Science.gov (United States)

Oleinikova, I.; Krishans, Z.; Mutule, A.

2008-01-01

The authors propose to select long-term solutions to the reliability problems of electrical networks in the stage of development planning. The guide lines or basic principles of such optimization are: 1) its dynamical nature; 2) development sustainability; 3) integrated solution of the problems of network development and electricity supply reliability; 4) consideration of information uncertainty; 5) concurrent consideration of the network and generation development problems; 6) application of specialized information technologies; 7) definition of requirements for independent electricity producers. In the article, the major aspects of liberalized electricity market, its functions and tasks are reviewed, with emphasis placed on the optimization of electrical network development as a significant component of sustainable management of power systems.

Photovoltaic applications for rural areas in North-East Europe

Energy Technology Data Exchange (ETDEWEB)

Lund, P. [Helsinki Univ. of Technology, Espoo (Finland); Faninger-Lund, H. [Solpros Ay, Helsinki (Finland)

1997-12-31

The photovoltaic (PV) markets have grown in the EU by ca 25 % per year during the past decade. World-wide the production of photovoltaic cells has exceeded the 80 MW{sub e}/a limit. The costs of PV modules have dropped by a factor of 5 during the last ten years and is now at the level of 4-5 USD/W{sub p}. The cost reductions mean on the hand new market segments for PV in the future. The market potential of photovoltaics, the financial issues connected to this, the PV system technology, the basic system design and the examples of typical projects are discussed in the presentation

Photovoltaic applications for rural areas in North-East Europe

International Nuclear Information System (INIS)

Lund, P.; Faninger-Lund, H.

1997-01-01

The photovoltaic (PV) markets have grown in the EU by ca 25 % per year during the past decade. World-wide the production of photovoltaic cells has exceeded the 80 MW e /a limit. The costs of PV modules have dropped by a factor of 5 during the last ten years and is now at the level of 4-5 USD/W p . The cost reductions mean on the hand new market segments for PV in the future. The market potential of photovoltaics, the financial issues connected to this, the PV system technology, the basic system design and the examples of typical projects are discussed in the presentation

Photovoltaic applications for rural areas in North-East Europe

Energy Technology Data Exchange (ETDEWEB)

Lund, P [Helsinki Univ. of Technology, Espoo (Finland); Faninger-Lund, H [Solpros Ay, Helsinki (Finland)

1998-12-31

The photovoltaic (PV) markets have grown in the EU by ca 25 % per year during the past decade. World-wide the production of photovoltaic cells has exceeded the 80 MW{sub e}/a limit. The costs of PV modules have dropped by a factor of 5 during the last ten years and is now at the level of 4-5 USD/W{sub p}. The cost reductions mean on the hand new market segments for PV in the future. The market potential of photovoltaics, the financial issues connected to this, the PV system technology, the basic system design and the examples of typical projects are discussed in the presentation

Photovoltaic power systems and the National Electrical Code: Suggested practices

Energy Technology Data Exchange (ETDEWEB)

Wiles, J. [New Mexico State Univ., Las Cruces, NM (United States). Southwest Technology Development Inst.

1996-12-01

This guide provides information on how the National Electrical Code (NEC) applies to photovoltaic systems. The guide is not intended to supplant or replace the NEC; it paraphrases the NEC where it pertains to photovoltaic systems and should be used with the full text of the NEC. Users of this guide should be thoroughly familiar with the NEC and know the engineering principles and hazards associated with electrical and photovoltaic power systems. The information in this guide is the best available at the time of publication and is believed to be technically accurate; it will be updated frequently. Application of this information and results obtained are the responsibility of the user.

Effect of an intervention based on basic Buddhist principles on the spiritual well-being of patients with terminal cancer.

Science.gov (United States)

Chimluang, Janya; Thanasilp, Sureeporn; Akkayagorn, Lanchasak; Upasen, Ratchaneekorn; Pudtong, Noppamat; Tantitrakul, Wilailuck

2017-12-01

To evaluate the effect of an intervention based on basic Buddhist principles on the spiritual well-being of patients with terminal cancer. This quasi-experimental research study had pre- and post-test control groups. The experimental group received conventional care and an intervention based on basic Buddhist principles for three consecutive days, including seven activities based on precept activities, concentration activities and wisdom activities. The control group received conventional care alone. Forty-eight patients participated in this study: 23 in the experimental group and 25 in the control group. Their mean age was 53 (standard deviation 10) years. The spiritual well-being of participants in the experimental group was significantly higher than that of participants in the control group at the second post-test (P principles improved the spiritual well-being of patients with terminal cancer. This result supports the beneficial effects of implementing this type of intervention for patients with terminal cancer. Copyright © 2017 Elsevier Ltd. All rights reserved.

Basic Principles and Utilization Possibilities’ of Ultrasonic Phased Array in Material Nondestructive Evaluation

Directory of Open Access Journals (Sweden)

Dagmar Faktorova

2004-01-01

Full Text Available The paper deals with the basic principles of operation and with the utilization possibilities of phased array (PA in materials nondestructive testing (NDT. The first part deals with description of PA arrangement modes, which enable to generate, focus and steer the ultrasonic beem. The second part deals with the description of electromagnetic acoustic transducer PA operation. The last part deals with the description of the utilization of PA in nondestructive testing of conductive materials and the advantages of PA utilization in inhomogeneous materials NDT.

Basic principles of aggressive rehabilitation after anterior cruciate ligament reconstruction

Directory of Open Access Journals (Sweden)

Dubljanin-Raspopović Emilija

2005-01-01

Full Text Available Rehabilitation after ACL (anterior cruciate ligament reconstruction has drastically changed over the last decade, with the adoption of a more aggressive approach, right from the first day after surgery. Progress in the effectiveness of rehabilitation is based on improvements in operative techniques, as well as on the encouraging results of histological studies regarding graft healing. Despite a huge amount of research papers on this topic, a rehabilitation golden standard still has not been established, due to the complexity of this problem. In this review, we point out the basic principles of rehabilitation after arthroscopically assisted ACL reconstruction based on actual practices, as well as the importance of specific procedures for the prevention of complications during the postoperative period. The importance of range-of-motion exercises, early weight bearing, an appropriate gait scheme, patella mobilisation, pain and oedema control, as well as stretching and balance exercises is explained. The functional advantages of closed kinetic chain exercises, as well as their influence on the graft are also described, in comparison to open kinetic chain exercises. The fundamentals of returning to sports are revealed and the specific aspects of rehabilitation regarding graft choice are pointed out. While waiting for new clinical investigations, which are expected to enable the establishment of a rehabilitation golden standard, the outlined principles should be followed. The complexity of this injury requires treatment in highly specialised institutions.

BASIC PRINCIPLES OF TRANSPORT TOURISM DEVELOPMENT IN UKRAINE

Directory of Open Access Journals (Sweden)

L. V. Martsenyuk

2013-08-01

Full Text Available Purpose. Undeveloped infrastructure and the system of public and tourist transport services prevent boom and spread of tourism glory of the country. Therefore, the development of tourist infrastructure and transport communication routes is a priority task. Methodology. Article methodology is based on the use of consequent methodological technique. Findings. Author analyzed the situation of tourism industry in Ukraine, set the basic principles for the tourism development and its priorities. The article contains the author's point of view on the fact that the tourism industry is of paramount importance to the state economics, and the development of this sector of public life should be a priority task for the near future. Originality. According to the author, the development of the inbound tourism is more reasonable, because it provides additional workplaces and exchange earnings. The author insists that the raise of quality level of domestic tourist services to the European standards would accelerate the development of Ukrainian tourism and would attract more holidaymakers from Ukraine and neighbouring countries. Practical value. The rational measures, which were taken regarding the proposed directions for the tourism development, can improve competitiveness of the Ukrainian tourist industry on the European tourist market.

THE BASIC PRINCIPLES OF RESEARCH IN NEUROEDUCATION STUDIES

Directory of Open Access Journals (Sweden)

Ali Nouri

2016-06-01

Full Text Available The present paper assembles contributions from the areas of education, psychology, cognitive science, and of course, neuroeducation itself to introduce the basic principles of research in the field of neuroeducation studies. It is particularly important, as such it is a useful way to justify researchers about what neuroeducation as a specific domain do that no other field can do as well or cannot do at all. Based on the literature reviewed, neuroeducational research can be understood as an interdisciplinary endeavor to develop an insightful understanding and holistic picture of problems related to learning and education. It thus epistemologically is based on an integrated methodological pluralism paradigm. This requires researchers to understand multiple methods and methodologies and employ as they formulate their own research projects. Researchers have a critical role to play in providing systematic evidence and conclusions that are scientifically valid and reliable and educationally relevant and usable. One significant implication of this argument is the need to strengthen the quality of the research component in graduate programs of the field and train interested researchers in the identification and formulation of relevant research questions.

Ground mounted photovoltaic installations. Guide for an impact study

International Nuclear Information System (INIS)

2011-01-01

Legally, an impact study must be performed for ground mounted photovoltaic installations with a power greater than 250 kW. This guide is aimed at helping the actors of the photovoltaic sector to perform impact studies. After the description of the characteristics of a photovoltaic installation (principles, technical characteristics of a ground mounted installation, impact of photovoltaic systems on climate) and a presentation of the legal framework (European commitments, Grenelle de l'Environnement, applicable procedures), this report present the objectives and approach of an impact study, describes how the environment is taken into account from the early stages of a project, how the impact study is to be prepared. The last part describes the different components of the impact study: legal content, project description, analysis of the site initial status and environment, analysis of the project effects, rationale for the choice of the project

Expert systems - basic principles and possible applications in nuclear energy

International Nuclear Information System (INIS)

Cain, D.G.; Schmidt, F.

1987-01-01

One of the primary goals of the application of mathematical methods and computational techniques in reactor physics is the effective and accurate solution of the neutron diffusion equation under various conditions. To reach this goal still requires much skill, experience, knowledge and imagination as can be seen from various contributions at this and other conferences. Experts are necessary. Will expert systems replace them. We shall discuss this question by describing the basic principles of problem solving by expert systems as compared to problem solving by mathematical and computational methods. From this we shall identify areas of possible applications of the new techniques in nuclear energy and develop some thoughts on present limitations. As a result we conclude that expert systems will not be able to replace experts as long as the experts use the systems to improve their own expertise

PROJECTING PRINCIPLES OF «MATHEMATICAL AND PHYSICAL BASICS IN INFORMATICS» MODULE AS PART OF A UNIVERSAL BACCALAUREATE PROGRAM

Directory of Open Access Journals (Sweden)

E. K. Samerkhanova

2016-01-01

Full Text Available This article is a presentation of “Mathematical and Physical Basics in Informatics” Module projected as part of universal baccalaureate model realized in Minin State Pedagogical University, Nizhny Novgorod, within the educational program for an extended group of qualifications “Informatics and Calculating Machines”. Module authors defined a strategy for baccalaureates preparation in the field of informational technology, which is realized due to a bunch of principles: education fundamentalization, learning systematization, activity, integration and student-centration. The principle of education fundamentalization requires consolidation of scientific and methodological preparation of students. The principle of learning systematization guarantees formation of students’ holistic ideology. The principle of integration is directed onto qualitative interdisciplinary conversion based on mutual enrichment of knowledge and skills. The principle of activity considers student personality, its formation and growth with respect to practical activity as a special form of psychical activity. The principle of student-centration is displayed as social-humanistic purpose of the educational process.

Semiconductor electrolyte photovoltaic energy converter

Science.gov (United States)

Anderson, W. W.; Anderson, L. B.

1975-01-01

Feasibility and practicality of a solar cell consisting of a semiconductor surface in contact with an electrolyte are evaluated. Basic components and processes are detailed for photovoltaic energy conversion at the surface of an n-type semiconductor in contact with an electrolyte which is oxidizing to conduction band electrons. Characteristics of single crystal CdS, GaAs, CdSe, CdTe and thin film CdS in contact with aqueous and methanol based electrolytes are studied and open circuit voltages are measured from Mott-Schottky plots and open circuit photo voltages. Quantum efficiencies for short circuit photo currents of a CdS crystal and a 20 micrometer film are shown together with electrical and photovoltaic properties. Highest photon irradiances are observed with the GaAs cell.

Basic principles for regulating nuclear activities

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The AECB has developed as its mission statement: `To ensure that the use of nuclear energy in Canada does not pose undue risk to health, safety, security and the environment`. This report proposes eleven qualitative principles for regulating nuclear activities whose achievement would satisfy the broad policy enunciated in the statement. They would further provide a basis for the specific regulatory requirements expressed by the AECB in its Regulations and other documents. They would thus represent a connecting link between the policy enunciated in the mission statement and the requirements. The proposed principles are largely concerned with how the allowable risk should be set for members of the public, for industry workers, for society as a whole, and for the environment. In making these recommendations the risks from normal operation of the licensed facility and those from a possible serious accident are considered separately. The distribution of risk between geographic communities and between generations is also addressed in the proposed principles. These are listed in the final section of the report. 23 refs.

Basic principles for regulating nuclear activities

International Nuclear Information System (INIS)

1996-03-01

The AECB has developed as its mission statement: 'To ensure that the use of nuclear energy in Canada does not pose undue risk to health, safety, security and the environment'. This report proposes eleven qualitative principles for regulating nuclear activities whose achievement would satisfy the broad policy enunciated in the statement. They would further provide a basis for the specific regulatory requirements expressed by the AECB in its Regulations and other documents. They would thus represent a connecting link between the policy enunciated in the mission statement and the requirements. The proposed principles are largely concerned with how the allowable risk should be set for members of the public, for industry workers, for society as a whole, and for the environment. In making these recommendations the risks from normal operation of the licensed facility and those from a possible serious accident are considered separately. The distribution of risk between geographic communities and between generations is also addressed in the proposed principles. These are listed in the final section of the report. 23 refs

Overview of Maximum Power Point Tracking Techniques for Photovoltaic Energy Production Systems

DEFF Research Database (Denmark)

Koutroulis, Eftichios; Blaabjerg, Frede

2015-01-01

A substantial growth of the installed photovoltaic systems capacity has occurred around the world during the last decade, thus enhancing the availability of electric energy in an environmentally friendly way. The maximum power point tracking technique enables maximization of the energy production...... of photovoltaic sources during stochastically varying solar irradiation and ambient temperature conditions. Thus, the overall efficiency of the photovoltaic energy production system is increased. Numerous techniques have been presented during the last decade for implementing the maximum power point tracking...... process in a photovoltaic system. This article provides an overview of the operating principles of these techniques, which are suited for either uniform or non-uniform solar irradiation conditions. The operational characteristics and implementation requirements of these maximum power point tracking...

A Symbiosis of Islamic Principles and Basic Human Values on Work and Life

Directory of Open Access Journals (Sweden)

Rokis Rohaiza

2014-07-01

Full Text Available The article discusses some basic issues on work and life based on Islamic and non-religious principles. Work and life are inseparable facets of and for human existence. Work derives from the demands of life, and thus it becomes a responsibility for every individual person. The article attempts to relate some highlighted Qur’anic verses and Hadith with basic occupational values such as honesty, modesty and innovativeness, among others, at workplaces. In the end, it makes an effort to understand the working of the subconscious mind on work to make life worthwhile. The plan for this article is to lay emphasis that the presence of human beings, which includes their mind, energy and whatever they can offer in the forms of work, benefits all. In such a case, not only those humans may be seen as successful in fulfilling the work-needs, but also victorious in completing the life-demands as human beings. “Virtuous workplace” is the most ideal platform for such purpose.

Designing with solar power a source book for building integrated photovoltaics (BIPV)

CERN Document Server

Prasad, Deo

2014-01-01

Designing with Solar Power is the result of international collaborative research and development work carried out within the framework of the International Energy Agency's Photovoltaic Power Systems Programme (PVPS) and performed within its Task 7 on 'Photovoltaic power systems in the built environment'.Each chapter of this precisely detailed and informative book has been prepared by an international expert in a specific area related to the development, use and application of building-integrated photovoltaics (BiPV). Chapters not only cover the basics of solar power and electrical concepts, bu

The notion and basic principles of restorative justice

Directory of Open Access Journals (Sweden)

Ćopić Sanja

2007-01-01

Full Text Available One of the most important achievements of the contemporary criminal justice system and criminal policy is development of the concept of restorative justice. Contemporary concept of restorative justice was developed in 1970s on the basis of the criticism of the traditional criminal law and criminal justice system. Since that time, it has been developing through different programs in many countries. Reform of the criminal justice system in Serbia staring from 2002 went into direction of entering elements of restorative justice into existing criminal justice system. In that sense, development of restorative justice is still at the beginning in our country. However, it can be noticed that there is a low level of awareness on the nature and importance of restorative forms of response to crime among our professionals, as well as a lack of understanding of the concept itself. Due to that, the aim of the paper is to enable better understanding of restorative concept in general through defining restorative justice and basic principles it relies on. That may put a basis for further recognition of restorative elements in our criminal justice system, which may provide adequate implementation of relevant provisions of restorative character in practice. .

Photovoltaic power generation system with photovoltaic cells as bypass diodes

Science.gov (United States)

Lentine, Anthony L.; Nielson, Gregory N.; Tauke-Pedretti, Anna; Cruz-Campa, Jose Luis; Okandan, Murat

2017-11-28

A photovoltaic power generation system that includes a solar panel is described herein. The solar panel includes a photovoltaic sub-module, which includes a group of microsystem enabled photovoltaic cells. The group includes a first string of photovoltaic cells, a second string of photovoltaic cells, and a differing photovoltaic cell. Photovoltaic cells in the first string are electrically connected in series, and photovoltaic cells in the second string are electrically connected in series. Further, the first string of photovoltaic cells, the second string of photovoltaic cells, and the differing photovoltaic cell are electrically connected in parallel. Moreover, the differing photovoltaic cell is used as a bypass diode for the first string of photovoltaic cells and the second string of photovoltaic cells.

Principles and operation of crystalline and amorphous silicon solar cells

International Nuclear Information System (INIS)

Chambouleyron, I.

1983-01-01

This paper deals with the fundamental aspects of photovoltaic energy conversion. Crystalline silicon solar cell physics together with design criteria and conversion losses are discussed. The general properties of hydrogenated amorphous silicon and the principles of a-Si:H solar cell operation are briefly reviewed. New trends in amorphous materials of photovoltaic interest and novel device structures are finally presented. (Author) [pt

Operation and maintenance cost data for residential photovoltaic modules/panels

Science.gov (United States)

Oster, J. R., Jr.; Zaremski, D. R., Jr.; Albert, E. M.; Hawkins, S. L.

1980-01-01

Costs associated with the operation and maintenance of residential photovoltaic modules and arrays are studied. Six basic topics related to operation and maintenance to photovoltaic arrays are investigated: maintenance; cleaning; panel replacement; gasket repair/replacement; wiring repair/replacement; and termination repair/replacement. The effects of the mounting types (rack mount, stand off mount, direct mount and integral mount) and the installation/replacement type (sequential, partial interruption and independent) are identified and described. Methods of reducing maintenance costs are suggested.

Assessment of IAEA safety series no. 75-INSAG-3 - ''basic safety principles for nuclear power plants''

International Nuclear Information System (INIS)

1989-01-01

The International Atomic Energy Agency Safety Series No. 75-INSAG--3, 'Basic Safety Principles for Nuclear Power Plants' is reviewed in the light of the Advisory Committee on Nuclear Safety reports ACNS--2, 'Safety Objectives for Nuclear Activities in Canada', and ACNS--4, 'Recommended General Safety Requirements for Nuclear Power Plants'. The INSAG safety objectives are consistent with the safety objectives stated in ACNS--2 but are less general, applying only to nuclear power plants. The INSAG safety principles are, in general, consistent with the requirements stated in ACNS--4 but put more emphasis on 'safety culture'. They give little attention to reactor plant effluents, waste management, or decommissioning. (fig., 5 refs.)

Model Building of Photovoltaic Array with MPPT Function and Research on Single Phase Grid Connected

Directory of Open Access Journals (Sweden)

Li Zhengzhou

2016-01-01

Full Text Available With the continued development of solar photovoltaic technology, research on distributed grid connected photovoltaic system has become a research focus in the field of photovoltaic grid power plant and the computer simulation technology is an effective technology means in the study. On the basis of the photovoltaic array output characteristic equation, the photovoltaic array maximum power control simulation model based on M function is established by using MATLAB/Simulink and the simulation model of single phase grid connected photovoltaic array is proposed. It overcomes the shortcomings of the process of building the model of the PV array by using Simulink component library and provides the basic guarantee for the realization of system simulation, guiding theory research and system design.

Solar cell array design handbook - The principles and technology of photovoltaic energy conversion

Science.gov (United States)

Rauschenbach, H. S.

1980-01-01

Photovoltaic solar cell array design and technology for ground-based and space applications are discussed from the user's point of view. Solar array systems are described, with attention given to array concepts, historical development, applications and performance, and the analysis of array characteristics, circuits, components, performance and reliability is examined. Aspects of solar cell array design considered include the design process, photovoltaic system and detailed array design, and the design of array thermal, radiation shielding and electromagnetic components. Attention is then given to the characteristics and design of the separate components of solar arrays, including the solar cells, optical elements and mechanical elements, and the fabrication, testing, environmental conditions and effects and material properties of arrays and their components are discussed.

Physical aspects of ferroelectric semiconductors for photovoltaic solar energy conversion

Energy Technology Data Exchange (ETDEWEB)

Lopez-Varo, Pilar [Departamento de Electrónica y Tecnología de Computadores, CITIC-UGR, Universidad de Granada, 18071 Granada (Spain); Bertoluzzi, Luca [Institute of Advanced Materials (INAM), Universitat Jaume I, 12006 Castelló (Spain); Bisquert, Juan, E-mail: bisquert@uji.es [Institute of Advanced Materials (INAM), Universitat Jaume I, 12006 Castelló (Spain); Department of Chemistry, Faculty of Science, King Abdulaziz University, Jeddah (Saudi Arabia); Alexe, Marin [Department of Physics, University of Warwick, Coventry CV4 7AL (United Kingdom); Coll, Mariona [Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus UAB, 08193, Bellaterra, Catalonia (Spain); Huang, Jinsong [Department of Mechanical and Materials Engineering and Nebraska Center for Materials and Nanoscience, University of Nebraska-Lincoln, Lincoln, NE 68588-0656 (United States); Jimenez-Tejada, Juan Antonio [Departamento de Electrónica y Tecnología de Computadores, CITIC-UGR, Universidad de Granada, 18071 Granada (Spain); Kirchartz, Thomas [IEK5-Photovoltaik, Forschungszentrum Jülich, 52425 Jülich (Germany); Faculty of Engineering and CENIDE, University of Duisburg–Essen, Carl-Benz-Str. 199, 47057 Duisburg (Germany); Nechache, Riad; Rosei, Federico [INRS—Center Énergie, Matériaux et Télécommunications, Boulevard Lionel-Boulet, Varennes, Québec, J3X 1S2 (Canada); Yuan, Yongbo [Department of Mechanical and Materials Engineering and Nebraska Center for Materials and Nanoscience, University of Nebraska-Lincoln, Lincoln, NE 68588-0656 (United States)

2016-10-07

Solar energy conversion using semiconductors to fabricate photovoltaic devices relies on efficient light absorption, charge separation of electron–hole pair carriers or excitons, and fast transport and charge extraction to counter recombination processes. Ferroelectric materials are able to host a permanent electrical polarization which provides control over electrical field distribution in bulk and interfacial regions. In this review, we provide a critical overview of the physical principles and mechanisms of solar energy conversion using ferroelectric semiconductors and contact layers, as well as the main achievements reported so far. In a ferroelectric semiconductor film with ideal contacts, the polarization charge would be totally screened by the metal layers and no charge collection field would exist. However, real materials show a depolarization field, smooth termination of polarization, and interfacial energy barriers that do provide the control of interface and bulk electric field by switchable spontaneous polarization. We explore different phenomena as the polarization-modulated Schottky-like barriers at metal/ferroelectric interfaces, depolarization fields, vacancy migration, and the switchable rectifying behavior of ferroelectric thin films. Using a basic physical model of a solar cell, our analysis provides a general picture of the influence of ferroelectric effects on the actual power conversion efficiency of the solar cell device, and we are able to assess whether these effects or their combinations are beneficial or counterproductive. We describe in detail the bulk photovoltaic effect and the contact layers that modify the built-in field and the charge injection and separation in bulk heterojunction organic cells as well as in photocatalytic and water splitting devices. We also review the dominant families of ferroelectric materials that have been most extensively investigated and have provided the best photovoltaic performance.

Physical aspects of ferroelectric semiconductors for photovoltaic solar energy conversion

International Nuclear Information System (INIS)

Lopez-Varo, Pilar; Bertoluzzi, Luca; Bisquert, Juan; Alexe, Marin; Coll, Mariona; Huang, Jinsong; Jimenez-Tejada, Juan Antonio; Kirchartz, Thomas; Nechache, Riad; Rosei, Federico; Yuan, Yongbo

2016-01-01

Solar energy conversion using semiconductors to fabricate photovoltaic devices relies on efficient light absorption, charge separation of electron–hole pair carriers or excitons, and fast transport and charge extraction to counter recombination processes. Ferroelectric materials are able to host a permanent electrical polarization which provides control over electrical field distribution in bulk and interfacial regions. In this review, we provide a critical overview of the physical principles and mechanisms of solar energy conversion using ferroelectric semiconductors and contact layers, as well as the main achievements reported so far. In a ferroelectric semiconductor film with ideal contacts, the polarization charge would be totally screened by the metal layers and no charge collection field would exist. However, real materials show a depolarization field, smooth termination of polarization, and interfacial energy barriers that do provide the control of interface and bulk electric field by switchable spontaneous polarization. We explore different phenomena as the polarization-modulated Schottky-like barriers at metal/ferroelectric interfaces, depolarization fields, vacancy migration, and the switchable rectifying behavior of ferroelectric thin films. Using a basic physical model of a solar cell, our analysis provides a general picture of the influence of ferroelectric effects on the actual power conversion efficiency of the solar cell device, and we are able to assess whether these effects or their combinations are beneficial or counterproductive. We describe in detail the bulk photovoltaic effect and the contact layers that modify the built-in field and the charge injection and separation in bulk heterojunction organic cells as well as in photocatalytic and water splitting devices. We also review the dominant families of ferroelectric materials that have been most extensively investigated and have provided the best photovoltaic performance.

The performance and economical analysis of grid-connected photovoltaic systems in Daegu, Korea

International Nuclear Information System (INIS)

Kim, Ju-Young; Jeon, Gyu-Yeob; Hong, Won-Hwa

2009-01-01

The distribution of the photovoltaic systems is faced with technological and economic problems, and the businesses and corporations feel burdened by the photovoltaic system's dubious economic value and high construction costs. Thus, not too many enterprises or private citizens have been participating in the business of installing photovoltaic systems. Moreover, because of lack of skills in integrating engineering and architectural design, they are experiencing difficulties even in using the technologies that have already been developed and available for application. To provide the basic information and specific data required for making the guidelines for developing photovoltaic technologies, this paper evaluates the system types, the actual state of operation, and performance of the two photovoltaic systems that are installed in Kiemyung University's Osan Building and Dongho Elementary School in Daegu Metropolitan City

Photovoltaic module and interlocked stack of photovoltaic modules

Science.gov (United States)

Wares, Brian S.

2014-09-02

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

Restoration and construction (buildings). Solar electric power. How to complete a photovoltaic project

International Nuclear Information System (INIS)

Bareau, Helene; Juniere, Olivier

2017-10-01

This brochure, edited by ADEME, the French office for energy management and sustainable development, gives a basic but comprehensive outlook on the way to complete a solar photovoltaic project in the cases of the restoration or the construction of a building. After a presentation of solar energy, its transformation into electric power, and the installation of solar photovoltaic panels and equipment, the brochure exposes the various steps of a photovoltaic project: economic analysis (cost estimation, budgets, financing incentives, power prices, the choice between selling or using electric power, the contracts, etc.), the planning of the project, the administrative procedure, the selection of a professional installer, how to run the photovoltaic system, how to run the business, etc

Annual report, Basic Sciences Branch, FY 1991

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This report summarizes the progress of the Basic Sciences Branch of the National Renewable Energy Laboratory (NREL) from October 1, 1990, through September 30, 1991. Seven technical sections of the report cover these main areas of NREL`s in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, Solid-State Spectroscopy, and Superconductivity. Each section explains the purpose and major accomplishments of the work in the context of the US Department of Energy`s National Photovoltaic Research Program plans.

Annual report, Basic Sciences Branch, FY 1991

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This report summarizes the progress of the Basic Sciences Branch of the National Renewable Energy Laboratory (NREL) from October 1, 1990, through September 30, 1991. Seven technical sections of the report cover these main areas of NREL's in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, Solid-State Spectroscopy, and Superconductivity. Each section explains the purpose and major accomplishments of the work in the context of the US Department of Energy's National Photovoltaic Research Program plans.

Adopting Basic Principles of the United Nations Academic Impact Initiative (UNAI): Can Cultural Differences Be Predicted from Value Orientations and Globalization?

Science.gov (United States)

Nechtelberger, Andrea; Renner, Walter; Nechtelberger, Martin; Supeková, Soňa Chovanová; Hadjimarkou, Maria; Offurum, Chino; Ramalingam, Panchalan; Senft, Birgit; Redfern, Kylie

2017-01-01

The United Nations Academic Impact (UNAI) Initiative has set forth 10 Basic Principles for higher education. In the present study, a 10 item self-report questionnaire measuring personal endorsement of these principles has been tested by self-report questionnaires with university and post-graduate students from Austria, China, Cyprus, India, Nigeria, and Slovakia (total N = 976, N = 627 female, mean age 24.7 years, s = 5.7). Starting from the assumptions of Moral Foundations Theory (MFT), we expected that personal attitudes toward the UNAI Basic Principles would be predicted by endorsement of various moral foundations as suggested by MFT and by the individual's degree of globalization. Whereas for the Austrian, Cypriot, and Nigerian sub- samples this assumption was largely confirmed, for the Chinese, Indian, and Slovak sub- samples only small amounts of the variance could be explained by regression models. All six sub-samples differed substantially with regard to their overall questionnaire responses: by five discriminant functions 83.6% of participants were classified correctly. We conclude that implementation of UNAI principles should adhere closely to the cultural requirements of the respective society and, where necessary should be accompanied by thorough informational campaigns about UN educational goals. PMID:29180977

Adopting Basic Principles of the United Nations Academic Impact Initiative (UNAI): Can Cultural Differences Be Predicted from Value Orientations and Globalization?

Science.gov (United States)

Nechtelberger, Andrea; Renner, Walter; Nechtelberger, Martin; Supeková, Soňa Chovanová; Hadjimarkou, Maria; Offurum, Chino; Ramalingam, Panchalan; Senft, Birgit; Redfern, Kylie

2017-01-01

The United Nations Academic Impact (UNAI) Initiative has set forth 10 Basic Principles for higher education. In the present study, a 10 item self-report questionnaire measuring personal endorsement of these principles has been tested by self-report questionnaires with university and post-graduate students from Austria, China, Cyprus, India, Nigeria, and Slovakia (total N = 976, N = 627 female, mean age 24.7 years, s = 5.7). Starting from the assumptions of Moral Foundations Theory (MFT), we expected that personal attitudes toward the UNAI Basic Principles would be predicted by endorsement of various moral foundations as suggested by MFT and by the individual's degree of globalization. Whereas for the Austrian, Cypriot, and Nigerian sub- samples this assumption was largely confirmed, for the Chinese, Indian, and Slovak sub- samples only small amounts of the variance could be explained by regression models. All six sub-samples differed substantially with regard to their overall questionnaire responses: by five discriminant functions 83.6% of participants were classified correctly. We conclude that implementation of UNAI principles should adhere closely to the cultural requirements of the respective society and, where necessary should be accompanied by thorough informational campaigns about UN educational goals.

Adopting Basic Principles of the United Nations Academic Impact Initiative (UNAI: Can Cultural Differences Be Predicted from Value Orientations and Globalization?

Directory of Open Access Journals (Sweden)

Andrea Nechtelberger

2017-11-01

Full Text Available The United Nations Academic Impact (UNAI Initiative has set forth 10 Basic Principles for higher education. In the present study, a 10 item self-report questionnaire measuring personal endorsement of these principles has been tested by self-report questionnaires with university and post-graduate students from Austria, China, Cyprus, India, Nigeria, and Slovakia (total N = 976, N = 627 female, mean age 24.7 years, s = 5.7. Starting from the assumptions of Moral Foundations Theory (MFT, we expected that personal attitudes toward the UNAI Basic Principles would be predicted by endorsement of various moral foundations as suggested by MFT and by the individual's degree of globalization. Whereas for the Austrian, Cypriot, and Nigerian sub- samples this assumption was largely confirmed, for the Chinese, Indian, and Slovak sub- samples only small amounts of the variance could be explained by regression models. All six sub-samples differed substantially with regard to their overall questionnaire responses: by five discriminant functions 83.6% of participants were classified correctly. We conclude that implementation of UNAI principles should adhere closely to the cultural requirements of the respective society and, where necessary should be accompanied by thorough informational campaigns about UN educational goals.

Photovoltaics. Textbook to fundamentals, technology and practice. 2. new. rev. ed.; Photovoltaik. Lehrbuch zu Grundlagen, Technologie und Praxis

Energy Technology Data Exchange (ETDEWEB)

Mertens, Konrad [Fachhochschule Muenster (Germany). Photovoltaik-Prueflabor

2013-06-01

The textbook under consideration covers the basic physical and electrical questions with respect to photovoltaic conversion. The system technology with information on solar cell interconnection, module interconnection and grid integration of photovoltaic systems are the focus of this book. The book describes the latest methods for measuring solar modules and explains the technical and economic development prospects of the photovoltaic power generation.

Basic principles of thermo-acoustic energy and temporal profile detection of microwave pulses

CERN Document Server

Andreev, V G; Vdovin, V A

2001-01-01

Basic principles of a thermo-acoustic method developed for the detection of powerful microwave pulses of nanosecond duration are discussed.A proposed method is based on the registration of acoustic pulse profile originated from the thermal expansion of the volume where microwave energy was absorbed.The amplitude of excited acoustic transient is proportional to absorbed microwave energy and its temporal profile resembles one of a microwave pulse when certain conditions are satisfied.The optimal regimes of microwave pulse energy detection and sensitivity of acoustic transient registration with piezo-transducer are discussed.It was demonstrated that profile of a microwave pulse could be detected with temporal resolution of 1 - 3 nanosecond.

Basic Concepts and Principles of Marketing.

Science.gov (United States)

Beder, Hal

1986-01-01

Presents an overview of marketing concepts and principles. These include (1) organizational objectives, (2) exchange, (3) value, (4) market segmentation, (5) market position, (6) consumer analysis, (7) product, (8) promotion, (9) place, and (10) price. (CH)

Photovoltaic applications of Cu(Sb,Bi)SM (M = Ag, Pb, Pt)

Science.gov (United States)

Tablero, C.

2017-04-01

Ternary Cu-(Sb,Bi)-S compounds are great absorbents of the solar radiation with a variety of applications including optoelectronic and photovoltaic applications. The analyses of several quaternary semiconductors derived from Cu-(Sb,Bi)-S materials is carried out using first-principles density-functional theory with orbital-dependent one-electron potentials. These analyses focus on the optoelectronic properties and the potential for solar cells. The optical properties are obtained from first-principles calculations, and split into inter- and intra-shell-species contributions in order to quantify the optical transitions responsible for the absorption. The absorption coefficients are then used as criteria to evaluate the efficiencies of these materials under several sunlight concentrations. The results indicate high energy photovoltaic conversion efficiency because of the large intra shell s-p absorption of the S and Sb or Bi atomic species.

Basic principles of solar water heating

CSIR Research Space (South Africa)

Page-Shipp, RJ

1980-09-10

Full Text Available This article correctly reflects the principles of Solar Water Heating as they pertain to South African conditions. However, it was written in 1980 and the global energy situation has changed considerably. Furthermore, modern commercial units...

Computational anatomy based on whole body imaging basic principles of computer-assisted diagnosis and therapy

CERN Document Server

Masutani, Yoshitaka

2017-01-01

This book deals with computational anatomy, an emerging discipline recognized in medical science as a derivative of conventional anatomy. It is also a completely new research area on the boundaries of several sciences and technologies, such as medical imaging, computer vision, and applied mathematics. Computational Anatomy Based on Whole Body Imaging highlights the underlying principles, basic theories, and fundamental techniques in computational anatomy, which are derived from conventional anatomy, medical imaging, computer vision, and applied mathematics, in addition to various examples of applications in clinical data. The book will cover topics on the basics and applications of the new discipline. Drawing from areas in multidisciplinary fields, it provides comprehensive, integrated coverage of innovative approaches to computational anatomy. As well,Computational Anatomy Based on Whole Body Imaging serves as a valuable resource for researchers including graduate students in the field and a connection with ...

THE BASIC PRINCIPLES OF TREATMENT OF ANKYLOSING SPONDYLITIS (BECHTEREW'S DISEASE

Directory of Open Access Journals (Sweden)

Shandor Fedorovich Erdes

2013-01-01

Full Text Available The history of treatment of ankylosing spondylitis (AS and the reasons behind the development of modern approaches to its therapy are briefly described. The main tasks and principles of non-pharmacological and drug therapies for ASare briefly reported. The need for therapeutic physical training is emphasized, since its role in maintaining the functional status in this group of patients has been proved. The lecture casts doubt on effectiveness of physiotherapy andother physical techniques because of the poor evidence base. The lecture emphasizes the disease-modifying role of nonsteroidal anti-inflammatory drugs and requirement to receive them constantly for patients with Bechterew's disease. Meanwhile, the basic anti-inflammatory drugs in patients with this disease are reported to play an auxiliary role and to have no effect on disease progression. The pronounced clinical effectiveness of all tumor necrosis factor α inhibitors is emphasized; certain differences in their therapeutical effect are described. The problems of surgical treatment, which deal with correction of disease complications or undesirable effects, are discussed.

Basic principles, contents, and benefits of an integrated management system

International Nuclear Information System (INIS)

Schwarzin, Juergen

2010-01-01

The basic principles and contents of an integrated management system are presented. The report focuses on the benefits and the experience accumulated in using an integrated management system. Integrated management systems are characterized by 2 features in particular: - On the one hand, by a system holistically controlling and describing all processes within a company which are necessary to achieve the company policy and company goals as defined. - On the other hand, it combines in one integrated management system various different aspects (such as quality, environmental protection, and safety) and the resulting requirements. Successful implementation of an integrated management system requires a clear commitment by company management to the integrated management system serving as a management tool. Implementation must be assigned the appropriate importance in the company. It must not be viewed as an instrument preserving 'status quo.' Instead, it must be seen as a tool for long-term improvement of the company. Application of the integrated management system minimizes the probability of occurrence of events, but is not able to reduce it to zero. (orig.)

Optics of two-stage photovoltaic concentrators with dielectric second stages

Science.gov (United States)

Ning, Xiaohui; O'Gallagher, Joseph; Winston, Roland

1987-04-01

Two-stage photovoltaic concentrators with Fresnel lenses as primaries and dielectric totally internally reflecting nonimaging concentrators as secondaries are discussed. The general design principles of such two-stage systems are given. Their optical properties are studied and analyzed in detail using computer ray trace procedures. It is found that the two-stage concentrator offers not only a higher concentration or increased acceptance angle, but also a more uniform flux distribution on the photovoltaic cell than the point focusing Fresnel lens alone. Experimental measurements with a two-stage prototype module are presented and compared to the analytical predictions.

Optics of two-stage photovoltaic concentrators with dielectric second stages.

Science.gov (United States)

Ning, X; O'Gallagher, J; Winston, R

1987-04-01

Two-stage photovoltaic concentrators with Fresnel lenses as primaries and dielectric totally internally reflecting nonimaging concentrators as secondaries are discussed. The general design principles of such two-stage systems are given. Their optical properties are studied and analyzed in detail using computer ray trace procedures. It is found that the two-stage concentrator offers not only a higher concentration or increased acceptance angle, but also a more uniform flux distribution on the photovoltaic cell than the point focusing Fresnel lens alone. Experimental measurements with a two-stage prototype module are presented and compared to the analytical predictions.

Photovoltaic and thermal energy conversion for solar powered satellites

Science.gov (United States)

Von Tiesenhausen, G. F.

1976-01-01

A summary is provided concerning the most important aspects of present investigations related to a use of solar power satellites (SPS) as a future source of terrestrial energy. General SPS characteristics are briefly considered, early work is reviewed, and a description of current investigations is presented. System options presently under study include a photovoltaic array, a thermionic system, and a closed Brayton cycle. Attention is given to system reference options, basic building blocks, questions of system analysis and engineering, photovoltaic conversion, and the utility interface. It is concluded that an SPS may be cost effective compared to terrestrial systems by 1995.

Zebrafish housing systems: a review of basic operating principles and considerations for design and functionality.

Science.gov (United States)

Lawrence, Christian; Mason, Timothy

2012-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations.

Bulk photovoltaic effect in epitaxial (K, Nb) substituted BiFeO3 thin films

Science.gov (United States)

Agarwal, Radhe; Zheng, Fan; Sharma, Yogesh; Hong, Seungbum; Rappe, Andrew; Katiyar, Ram

We studied the bulk photovoltaic effect in epitaxial (K, Nb) modified BiFeO3 (BKFNO) thin films using theoretical and experimental methods. Epitaxial BKFNO thin films were grown by pulsed laser deposition (PLD). First, we have performed first principles density function theory (DFT) using DFT +U method to calculate electronic band structure, including Hubbard-Ueff (Ueff =U-J) correction into Hamiltonian. The electronic band structure calculations showed a direct band gap at 1.9 eV and a defect level at 1.7 eV (in a 40 atom BKFNO supercell), sufficiently lower in comparison to the experimentally observed values. Furthermore, the piezoforce microscopy (PFM) measurements indicated the presence of striped polydomains in BKFNO thin films. Angle-resolved PFM measurements were also performed to find domain orientation and net polarization directions in these films. The experimental studies of photovoltaic effect in BKNFO films showed a short circuit current of 59 micro amp/cm2 and open circuit voltage of 0.78 V. We compared our experimental results with first principles shift current theory calculations of bulk photovoltaic effect (BPVE).The synergy between theory and experimental results provided a realization of significant role of BPVE in order to understand the photovoltaic mechanism in ferroelectrics.

Using the Chemistry of Fireworks to Engage Students in Learning Basic Chemical Principles: A Lesson in Eco-Friendly Pyrotechnics

Science.gov (United States)

Steinhauser, Georg; Klapotke, Thomas M.

2010-01-01

Fascination with fireworks and pyrotechnics can be used for educational purposes. Several aspects of pyrochemistry such as redox reactions, flame colors, or the theory of combustion can be incorporated in the curriculum to illustrate some basic chemical principles, guaranteeing a lesson that will be engaging and memorable. Beyond classic…

Reflective photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Lentine, Anthony L.; Nielson, Gregory N.; Cruz-Campa, Jose Luis; Okandan, Murat; Goeke, Ronald S.

2018-03-06

A photovoltaic module includes colorized reflective photovoltaic cells that act as pixels. The colorized reflective photovoltaic cells are arranged so that reflections from the photovoltaic cells or pixels visually combine into an image on the photovoltaic module. The colorized photovoltaic cell or pixel is composed of a set of 100 to 256 base color sub-pixel reflective segments or sub-pixels. The color of each pixel is determined by the combination of base color sub-pixels forming the pixel. As a result, each pixel can have a wide variety of colors using a set of base colors, which are created, from sub-pixel reflective segments having standard film thicknesses.

Federal policies to promote the widespread utilization of photovoltaic systems. Volume two. Technical document

Energy Technology Data Exchange (ETDEWEB)

None

1980-02-01

The question of photovoltaic system interactions with electric utility grids is addressed. Discussions of system configurations, effects on utility dispatch and generation planning, effects of utility rate structures on photovoltaic deployment and vice versa, interactions of photovoltaic and electrical storage systems, effects on end-use reliability, and the ultimate limitations on photovoltaic penetration into electric grids are presented. Photovoltaic system economic issues are considered. Discussions of the high first cost and the Program plans and strategies to reduce costs (and PV prices), expected evolution of photovoltaic technology, effects of various financial incentives on photovoltaics, implications of utility vs non-utility ownership of photovoltaics, likelihood that sufficient capital will be available to adequately finance the deployment of photovoltaic systems, current status and expected evolution of the photovoltaic supply industry, and the programmatic activities directed at aiding the evolution of a healthy, competitive industry are presented. The basic issues of photovoltaic market development are studied. The potential of various market segments and the complexity involved in defining and identifying the various segments; issues to be faced in deployment of dispersed photovoltaic systems including innovation acceptance on the part of the building industry, building codes, zoning, insurance, information dissemination, public acceptance, solar access, state and local solar photovoltaic incentives, and the implications for urban and suburban land use; and the need for, and method of development of, photovoltaic standards and warranties on photovoltaic systems are discussed. The conclusions of the report with respect to the information requested by Congress are summarized, and findings for congressional action are presented. (WHK)

Photovoltaic solar concentrator

Science.gov (United States)

Nielson, Gregory N.; Cruz-Campa, Jose Luis; Okandan, Murat; Resnick, Paul J.; Sanchez, Carlos Anthony; Clews, Peggy J.; Gupta, Vipin P.

2015-09-08

A process including forming a photovoltaic solar cell on a substrate, the photovoltaic solar cell comprising an anchor positioned between the photovoltaic solar cell and the substrate to suspend the photovoltaic solar cell from the substrate. A surface of the photovoltaic solar cell opposite the substrate is attached to a receiving substrate. The receiving substrate may be bonded to the photovoltaic solar cell using an adhesive force or a metal connecting member. The photovoltaic solar cell is then detached from the substrate by lifting the receiving substrate having the photovoltaic solar cell attached thereto and severing the anchor connecting the photovoltaic solar cell to the substrate. Depending upon the type of receiving substrate used, the photovoltaic solar cell may be removed from the receiving substrate or remain on the receiving substrate for use in the final product.

Modeling the thermal absorption factor of photovoltaic/thermal combi-panels

NARCIS (Netherlands)

Santbergen, R.; Zolingen, van R.J.C.

2006-01-01

In a photovoltaic/thermal combi-panel solar cells generate electricity while residual heat is extracted to be used for tap water heating or room heating. In such a panel the entire solar spectrum can be used in principle. Unfortunately long wavelength solar irradiance is poorly absorbed by the

MATLAB Simulation of Photovoltaic and Photovoltaic/Thermal Systems Performance

Science.gov (United States)

Nasir, Farah H. M.; Husaini, Yusnira

2018-03-01

The efficiency of the photovoltaic reduces when the photovoltaic cell temperature increased due to solar irradiance. One solution is come up with the cooling system photovoltaic system. This combination is forming the photovoltaic-thermal (PV/T) system. Not only will it generate electricity also heat at the same time. The aim of this research is to focus on the modeling and simulation of photovoltaic (PV) and photovoltaic-thermal (PV/T) electrical performance by using single-diode equivalent circuit model. Both PV and PV/T models are developed in Matlab/Simulink. By providing the cooling system in PV/T, the efficiency of the system can be increased by decreasing the PV cell temperature. The maximum thermal, electrical and total efficiency values of PV/T in the present research are 35.18%, 15.56% and 50.74% at solar irradiance of 400 W/m2, mass flow rate of 0.05kgs-1 and inlet temperature of 25 °C respectively has been obtained. The photovoltaic-thermal shows that the higher efficiency performance compared to the photovoltaic system.

Photovoltaic conference on system services

International Nuclear Information System (INIS)

Burges, Karsten; Freier, Karin; Vincent, Jeremy; Montigny, Marie; Engel, Bernd; Konstanciak, Wilhelm; Makdessi, Georges; Acres, Adrien; Schlaaff, Torsten; Defaix, Christophe

2015-01-01

The French-German office for Renewable energies (OFAEnR) organised a photovoltaic conference on system services and photovoltaic facilities. In the framework of this French-German exchange of experience, about 100 participants have analysed and discussed the regulatory, technical and economical context of system services, their evolution and implementation in the framework of an accelerated development of photovoltaic conversion in both countries. This document brings together the available presentations (slides) made during this event: 1 - Technical Introduction to system services: principles, actors and perspectives (Karsten Burges); 2 - Legal guidelines of EEG (Renewable energy Sources Act) and the System Stability Ordinance as well as future measures for PV grid integration (Karin Freier); 3 - evolution of ancillary services regulation; opening the possibility for new market players to participate in maintaining the system stability (Jeremy Vincent, Marie Montigny); 4 - Paradigm shift for ancillary services: PV as a new stakeholder (Bernd Engel); 5 - Challenges of RES integration (Wilhelm Konstanciak 6 - System services supplied by PV inverters, solutions for frequency and active/reactive power control at the injection point (Georges Makdessi); 7 - Grid disturbance abatement and voltage stability control by monitoring local scale PV production (Adrien Acres); 8 - Flexibly Adaptable Power Plant Controller - The Answer to Various Grid Requirements (Torsten Schlaaff); 9 - ENR-pool project: What kind of business model for ancillary services by PV power plants? (Christophe Defaix)

Common-Ground-Type Transformerless Inverters for Single-Phase Solar Photovoltaic Systems

DEFF Research Database (Denmark)

Siwakoti, Yam Prasad; Blaabjerg, Frede

2018-01-01

This paper proposes a family of novel flying capacitor transformerless inverters for single-phase photovoltaic (PV) systems. Each of the new topologies proposed is based on a flying capacitor principle and requires only four power switches and/or diodes, one capacitor, and a small filter at the o......This paper proposes a family of novel flying capacitor transformerless inverters for single-phase photovoltaic (PV) systems. Each of the new topologies proposed is based on a flying capacitor principle and requires only four power switches and/or diodes, one capacitor, and a small filter...... at the output stage. A simple unipolar sinusoidal pulse width modulation technique is used to modulate the inverter to minimize the switching loss, output current ripple, and the filter requirements. In general, the main advantages of the new inverter topologies are: 1) the negative polarity of the PV...... description of the operating principle with modulation techniques, design guidelines, and comprehensive comparisons is presented to reveal the properties and limitations of each topology in detail. Finally, experimental results of 1-kVA prototypes are presented to prove the concept and theoretical analysis...

The photovoltaic: channels, markets and outlooks; Le photovoltaique: les filieres, les marches, les perspectives

Energy Technology Data Exchange (ETDEWEB)

Jourde, P. [CEA Cadarache (GENEC), 13 - Saint-Paul-lez-Durance (France)

2005-07-01

The photovoltaic market is in expansion with a good energy, political and environmental context. It needs meanwhile to realize developments in the storage domain and in the cost of connexion to the network. To illustrate these conclusions this paper discusses the following chapters: the solar energy, the principle and the channels of the photovoltaic, the applications (autonomous electrification and houses connected to the network) and the markets, a state of the art and the outlooks. (A.L.B.)

Semiconductor band alignment from first principles: a new nonequilibrium Green's function method applied to the CZTSe/CdS interface for photovoltaics

DEFF Research Database (Denmark)

Palsgaard, Mattias Lau Nøhr; Crovetto, Andrea; Gunst, Tue

2016-01-01

In this paper we present a method to obtain the band offset of semiconductor heterointerfaces from Density Functional Theory together with the nonequilibrium Green's function method. Band alignment and detailed properties of the interface between Cu2ZnSnSe4 and CdS are extracted directly from first...... principles simulations. The interface is important for photovoltaics applications where in particular the band offsets are important for efficiency. The band bending pose a problem for accurate atomistic simulations of band offsets due to its long range. Here we investigate two different methods for dealing...... with band bending directly. One involves doping the materials to induce a shorter screening length. The other method is to apply a voltage bias across the interface to correct for the band bending. The calculated band offsets agree well with previous experimental and theoretical studies and, interestingly...

Basic Principles of Interpersonal Social Rhythm Therapy in Bipolar Disorder

Directory of Open Access Journals (Sweden)

Gokben Hizli Sayar

2014-08-01

Full Text Available Interpersonal Social Rhythm Therapy is a psychotherapy modality that helps the patient recognize the relationship between disruptions in social rhythms and the onset of previous episodes of psychiatric disorders. It uses psychoeducation and behavioral techniques to maintain social rhythm and sleep/wake regularity. It is closely related to and ldquo;social zeitgeber theory and rdquo; that emphasizes the importance that social rhythm regularity may play in synchronization of circadian rhythms in individuals with or at risk for bipolar spectrum disorders. Interpersonal and social rhythm therapy have been shown to stabilize social rhythms and enhance course and outcome in bipolar disorder. This review focuses on the theoretical principles and the basic steps of interpersonal and social rhythm therapy as a psychotherapy approach in bipolar disorder. PubMed, Scopus, Google Scholar databases were searched without temporal restriction. Search terms included interpersonal social rhythm therapy, bipolar, mood disorders. Abstracts were reviewed for relevance, and randomized controlled trials of interpersonal and social rhythm therapy in bipolar disorder selected. These researches also summarized on the final part of this review. [Psikiyatride Guncel Yaklasimlar - Current Approaches in Psychiatry 2014; 6(4.000: 438-446

Thin Film Photovoltaic Partnership Project | Photovoltaic Research | NREL

Science.gov (United States)

Thin Film Photovoltaic Partnership Project Thin Film Photovoltaic Partnership Project NREL's Thin Film Photovoltaic (PV) Partnership Project led R&D on emerging thin-film solar technologies in the United States from 1994 to 2009. The project made many advances in thin-film PV technologies that allowed

Organic photovoltaics concepts and realization

CERN Document Server

Dyakonov, Vladimir; Parisi, Jürgen; Sariciftci, Niyazi

2003-01-01

Achieving efficient solar energy conversion at both large scale and low cost is among the most important technological challenges for the near future. The present volume describes and explains the fundamentals of organic/plastic solar cells in a manner accessible to both researchers and students. It provides a comprehensive analysis of the operational principles underlying several types of solar cells that have absorber layers based on polymer materials and small molecules. It addresses competing approaches, such as polymer solar cells and dye-sensitized cells, while considering the thermodynamic principles within the context of these schemes. Organic Photovoltaics also analyzes in detail the charge-transfer processes in the bulk-heterojunction devices corresponding to the relevant mechanism of carrier generation. Emphasized throughout is the concept of interpenetrating polymer-fullerene networks, due to their high potential for improving power efficiency.

Simulation, elaboration and analysis of inter-digitated back contacts photovoltaic cells

International Nuclear Information System (INIS)

Nichiporuk, O.

2005-05-01

Solar energy is the most promising and powerful energy source among renewable energies. Photovoltaic electricity is obtained by direct transformation of the sunlight into electricity by means of photovoltaic cells. The objective of this work is to develop photovoltaic cells with back inter-digitated contacts. In the first chapter, we recall the principle of operation and the fundamental parameters of a photovoltaic cell. In a second part, we explain specificities of the inter-digitated back-contact solar cells, as well as the advantages and the disadvantages of such cells. In the second chapter we study the operation of inter-digitated back-contacts solar cells by two dimensional numerical simulation in order to optimize the geometry and doping profiles of the cell. The third chapter relates to the techniques and the methods of characterization of photovoltaic devices and components. In the fourth chapter, we describe the elaboration of inter-digitated back-contact cells. Three technological processes are presented in order to develop a simple technology for cells realization. In particular, we develop the auto-aligned technological process, which enables to elaborate the cells by using only one lithography step. In the last chapter we examine various approaches to reduce the surface recombination: SiO 2 , silicon nitride deposited by UVCVD, hydrogen annealing, etc.. (author)

Simulation, elaboration and analysis of inter-digitated back-contacts photovoltaic cells

International Nuclear Information System (INIS)

Nichiporuk, O.

2005-05-01

Solar energy is the most promising and powerful energy source among renewable energies. Photovoltaic electricity is obtained by direct transformation of the sunlight into electricity by means of photovoltaic cells. The objective of this work is to develop photovoltaic cells with back inter-digitated contacts. In the first chapter, we recall the principle of operation and the fundamental parameters of a photovoltaic cell. In a second part, we explain specificities of the inter-digitated back-contact solar cells, as well as the advantages and the disadvantages of such cells. In the second chapter we study the operation of inter-digitated back-contacts solar cells by two dimensional numerical simulation in order to optimize the geometry and doping profiles of the cell. The third chapter relates to the techniques and the methods of characterization of photovoltaic devices and components. In the fourth chapter, we describe the elaboration of inter-digitated back-contact cells. Three technological processes are presented in order to develop a simple technology for cells realization. In particular, we develop the auto-aligned technological process, which enables to elaborate the cells by using only one lithography step. In the last chapter we examine various approaches to reduce the surface recombination: SiO 2 , silicon nitride deposited by UVCVD, hydrogen annealing, etc... (author)

Semiconductor materials for solar photovoltaic cells

CERN Document Server

Wong-Ng, Winnie; Bhattacharya, Raghu

2016-01-01

This book reviews the current status of semiconductor materials for conversion of sunlight to electricity, and highlights advances in both basic science and manufacturing.  Photovoltaic (PV) solar electric technology will be a significant contributor to world energy supplies when reliable, efficient PV power products are manufactured in large volumes at low cost.  Expert chapters cover the full range of semiconductor materials for solar-to-electricity conversion, from crystalline silicon and amorphous silicon to cadmium telluride, copper indium gallium sulfide selenides, dye sensitized solar cells, organic solar cells, and environmentally friendly copper zinc tin sulfide selenides. The latest methods for synthesis and characterization of solar cell materials are described, together with techniques for measuring solar cell efficiency. Semiconductor Materials for Solar Photovoltaic Cells presents the current state of the art as well as key details about future strategies to increase the efficiency and reduce ...

Basic Principle of Advanced Oxidation Technology : Hybrid Technology Based on Ozone and Titania

International Nuclear Information System (INIS)

Widdi Usada; Agus Purwadi

2007-01-01

One of problems in health environment is organic liquid waste from many pollutant resources. Environmental friendly technology for degrading this waste is ozone which produced by plasma discharge technology, but its capability is limited. However, it is needed a new environmental friendly technology which has stronger capability. This new technology is so called advanced oxidation technology. Advanced oxidation technology is a hybrid of ozone, peroxide, UV light and photo catalyst. In this paper, it is introduced basic principle of hybrid of ozone and titania photo catalyst semiconductor. The capability of organic liquid degradation will be stronger because there is new radical which is produced by chemical reaction between electron-hole pair from photo catalyst titania and water or oxygen. This new radical then degrades this organic pollutant. This technology is used to degrade phenol. (author)

Photovoltaic module and laminate

Science.gov (United States)

Bunea, Gabriela E.; Kim, Sung Dug; Kavulak, David F.J.

2018-04-10

A photovoltaic module is disclosed. The photovoltaic module has a first side directed toward the sun during normal operation and a second, lower side. The photovoltaic module comprises a perimeter frame and a photovoltaic laminate at least partially enclosed by and supported by the perimeter frame. The photovoltaic laminate comprises a transparent cover layer positioned toward the first side of the photovoltaic module, an upper encapsulant layer beneath and adhering to the cover layer, a plurality of photovoltaic solar cells beneath the upper encapsulant layer, the photovoltaic solar cells electrically interconnected, a lower encapsulant layer beneath the plurality of photovoltaic solar cells, the upper and lower encapsulant layers enclosing the plurality of photovoltaic solar cells, and a homogenous rear environmental protection layer, the rear environmental protection layer adhering to the lower encapsulant layer, the rear environmental protection layer exposed to the ambient environment on the second side of the photovoltaic module.

A Study to Determine the Current Level of Implementation of Eighteen Basic Middle School Principles in the State of Missouri.

Science.gov (United States)

Beckman, Vernal G.

The current level of implementation of 18 basic middle school principles in the 147 Missouri schools that met the definition of middle schools is the focus of this study. Questionnaire responses were received from 101 of the schools' administrators. Mean scores, standard deviations, and mean percentages of the maximum possible scores yielded by…

Photovoltaic module and interlocked stack of photovoltaic modules

Science.gov (United States)

Wares, Brian S.

2012-09-04

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

A photovoltaic module

DEFF Research Database (Denmark)

2013-01-01

The present invention relates to a photovoltaic module comprising a carrier substrate, said carrier substrate carrying a purely printed structure comprising printed positive and negative module terminals, a plurality of printed photovoltaic cell units each comprising one or more printed...... photovoltaic cells, wherein the plurality of printed photovoltaic cell units are electrically connected in series between the positive and the negative module terminals such that any two neighbouring photovoltaic cell units are electrically connected by a printed interconnecting electrical conductor....... The carrier substrate comprises a foil and the total thickness of the photovoltaic module is below 500 [mu]m. Moreover, the nominal voltage level between the positive and the negative terminals is at least 5 kV DC....

Photovoltaic device

Energy Technology Data Exchange (ETDEWEB)

Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

2017-03-21

The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

Photovoltaic device

Science.gov (United States)

Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

2015-06-02

The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

Manufacturing technologies for photovoltaics and possible means of their development in Russia (Review). Part 1: General approach to the development of photoelectric converters and basic silicon technologies

Science.gov (United States)

Tarasenko, A. B.; Popel', O. S.

2015-11-01

The state and key tendencies of the development of basic technologies for manufacture of photoelectric converters (PECs) in the world are considered, and their advantages and disadvantages are discussed. The first part of the review gives short information on the development of photovoltaics in the world and planes of the development of solar power plants in Russia. Total power of photoelectric plants operating in various countries in 2015 exceeded 150 GW and increased in the last ten years with a rate of approximately 50% per year. Russia made important state decisions on the support of the development of renewable power engineering and developed mechanisms, which were attractive for business, on the stimulation of building of the network of solar power plants with a total power to 1.5 GW in the country to 2020. At the same time, the rigid demands are made with respect to the localization of the production of components of these plants that opens new abilities for the development of the domestic production of photovoltaics manufacture. Data on the efficiency of PECs of various types that are attained in the leading laboratories of the world are given. Particular emphasis has been placed on the consideration of basic silicon technologies of PEC manufacture, which had the widest commercial application. The basic methods for production of polycrystalline silicon and making single-crystal and multicrystal silicon are described. Fundamentals of making techniques for plates, PECs, and photoelectric modules based on single-crystal and polycrystalline silicon are considered. The second part will be devoted to modifications of manufacturing techniques for photoelectric converters, enhancement methods for contact structures, and recommendations of authors with respect to the choice of prospective technologies for the expansion of PEC production in Russia. It will involve formulations and substantiations of the most promising lines of the development of photoelectric

Computational approach to the study of morphological properties of polymer/fullerene blends in photovoltaics

Science.gov (United States)

Gaitho, Francis M.; Mola, Genene T.; Pellicane, Giuseppe

2018-02-01

Organic solar cells have the ability to transform solar energy efficiently and have a promising energy balance. Producing these cells is economical and makes use of methods of printing using inks built on solvents that are well-matched with a variety of cheap materials like flexible plastic or paper. The primary materials used to manufacture organic solar cells include carbon-based semiconductors, which are good light absorbers and efficient charge generators. In this article, we review previous research of interest based on morphology of polymer blends used in bulk heterojunction (BHJ) solar cells and introduce their basic principles. We further review computational models used in the analysis of surface behavior of polymer blends in BHJ as well as the trends in the field of polymer surface science as applied to BHJ photovoltaics. We also give in brief, the opportunities and challenges in the area of polymer blends on BHJ organic solar cells.

Basic hydraulics

CERN Document Server

Smith, P D

1982-01-01

BASIC Hydraulics aims to help students both to become proficient in the BASIC programming language by actually using the language in an important field of engineering and to use computing as a means of mastering the subject of hydraulics. The book begins with a summary of the technique of computing in BASIC together with comments and listing of the main commands and statements. Subsequent chapters introduce the fundamental concepts and appropriate governing equations. Topics covered include principles of fluid mechanics; flow in pipes, pipe networks and open channels; hydraulic machinery;

Organic photovoltaics

DEFF Research Database (Denmark)

Demming, Anna; Krebs, Frederik C; Chen, Hongzheng

2013-01-01

's supply, even at our increasingly ravenous rate of global energy consumption [1]. But it's not what you have got it's what you do with it. Hence the intense focus on photovoltaic research to find more efficient ways to harness energy from the Sun. Recently much of this research has centred on organic...... solar cells since they offer simple, low-cost, light-weight and large-area flexible photovoltaic structures. This issue with guest editors Frederik C Krebs and Hongzheng Chen focuses on some of the developments at the frontier of organic photovoltaic technology. Improving the power conversion efficiency...... of organic photovoltaic systems, while maintaining the inherent material, economic and fabrication benefits, has absorbed a great deal of research attention in recent years. Here significant progress has been made with reports now of organic photovoltaic devices with efficiencies of around 10%. Yet operating...

Photovoltaic barometer

International Nuclear Information System (INIS)

2014-01-01

The global solar photovoltaic market enjoyed a strong revival in 2013. Preliminary estimates put it in excess of 37 GWp, compared to 30 GWp in 2012 and 2011. The solar photovoltaic sector led the annual installed capacity ratings for renewable energies, taking worldwide capacity up to 137 GWp by the end of the year which means a 35% year-on-year increase. At global level the high growth markets - China, Japan and America - contrast sharply with the contracting European Union market. The strong recovery of the global photovoltaic market is due to the drop in module prices which in some zones has dropped below the conventional electricity price. In the E.U, in 2013 the photovoltaic electricity reached 80.2 TWh while the capacity connected during this year was 9922.2 MWp. Concerning the capacity connected in 2013 the 2 main contributors in Europe are Germany (3310.0 MWc) and Italy (1462.0 MWc). These 2 countries represent also 68% of the cumulated and connected capacity in Europe. All along the article various charts and tables give the figures of the photovoltaic capacity per inhabitant for each E.U country in 2013, the electricity production from photovoltaic power for each E.U country, and the main photovoltaic module manufacturers in 2013 worldwide reporting production and turnover

Microwave system engineering principles

CERN Document Server

Raff, Samuel J

1977-01-01

Microwave System Engineering Principles focuses on the calculus, differential equations, and transforms of microwave systems. This book discusses the basic nature and principles that can be derived from thermal noise; statistical concepts and binomial distribution; incoherent signal processing; basic properties of antennas; and beam widths and useful approximations. The fundamentals of propagation; LaPlace's Equation and Transmission Line (TEM) waves; interfaces between homogeneous media; modulation, bandwidth, and noise; and communications satellites are also deliberated in this text. This bo

Workforce challenges and opportunities in the solar photovoltaic industry in Toronto

International Nuclear Information System (INIS)

Saneinejad, Sheyda

2011-01-01

In December 2009, the city of Toronto adopted principles and targets for the city's sustainable energy future. The city plans to install 2 MW of solar photovoltaic panels in its facilities. The aim of this study is to assess the impact of such a project, as well as further expansion of solar photovoltaic energy generation, from the economic development perspective. A literature review, online surveys and interviews with solar industries were carried out and a job estimation model was developed. Results showed that the 2 MW installation would create 53 person years of employment locally while expansion of the technology throughout the city could generate 100,000 local jobs. However this research also pointed out a lack of suitably qualified and experienced personnel Canada-wide. This study demonstrated that the solar photovoltaic industry has the potential to provide significant economic benefits in Toronto but that certification programs must be put in place to address the lack of qualified personnel.

Photovoltaic device

Science.gov (United States)

Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

2015-09-01

The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

Neutrons in studies of phospholipid bilayers and bilayer–drug interaction. I. Basic principles and neutron diffraction

Directory of Open Access Journals (Sweden)

Belička M.

2014-12-01

Full Text Available In our paper, we demonstrate several possibilities of using neutrons in pharmaceutical research with the help of examples of scientific results achieved at our University. In this first part, basic properties of neutrons and elementary principles of elastic scattering of thermal neutrons are described. Results of contrast variation neutron diffraction on oriented phospholipid bilayers with intercalated local anaesthetic or cholesterol demonstrate the potential of this method at determination of their position in bilayers. Diffraction experiments with alkan-1-ols located in the bilayers revealed their influence on bilayer thickness as a function of their alkyl chain length.

Progress in high-efficient solution process organic photovoltaic devices fundamentals, materials, devices and fabrication

CERN Document Server

Li, Gang

2015-01-01

This book presents an important technique to process organic photovoltaic devices. The basics, materials aspects and manufacturing of photovoltaic devices with solution processing are explained. Solution processable organic solar cells - polymer or solution processable small molecules - have the potential to significantly reduce the costs for solar electricity and energy payback time due to the low material costs for the cells, low cost and fast fabrication processes (ambient, roll-to-roll), high material utilization etc. In addition, organic photovoltaics (OPV) also provides attractive properties like flexibility, colorful displays and transparency which could open new market opportunities. The material and device innovations lead to improved efficiency by 8% for organic photovoltaic solar cells, compared to 4% in 2005. Both academic and industry research have significant interest in the development of this technology. This book gives an overview of the booming technology, focusing on the solution process fo...

Principles of project management

Science.gov (United States)

1982-01-01

The basic principles of project management as practiced by NASA management personnel are presented. These principles are given as ground rules and guidelines to be used in the performance of research, development, construction or operational assignments.

Synthetic principles directing charge transport in low-band-gap dithienosilole-benzothiadiazole copolymers

KAUST Repository

Beaujuge, Pierre; Tsao, Hoinok; Hansen, Michael Ryan; Amb, Chad M.; Risko, Chad; Subbiah, Jegadesan; Choudhury, Kaushik Roy; Mavrinskiy, Alexey V.; Pisula, Wojciech; Bré das, Jean Luc; So, Franky; Mü llen, Klä us; Reynolds, John R.

2012-01-01

Given the fundamental differences in carrier generation and device operation in organic thin-film transistors (OTFTs) and organic photovoltaic (OPV) devices, the material design principles to apply may be expected to differ. In this respect

Basic principles of applied nuclear techniques

International Nuclear Information System (INIS)

Basson, J.K.

1976-01-01

The technological applications of radioactive isotopes and radiation in South Africa have grown steadily since the first consignment of man-made radioisotopes reached this country in 1948. By the end of 1975 there were 412 authorised non-medical organisations (327 industries) using hundreds of sealed sources as well as their fair share of the thousands of radioisotope consignments, annually either imported or produced locally (mainly for medical purposes). Consequently, it is necessary for South African technologists to understand the principles of radioactivity in order to appreciate the industrial applications of nuclear techniques [af

Basic principles for occupational radiation monitoring

International Nuclear Information System (INIS)

1987-01-01

This Safety Guide sets forth the objectives of an adequate strategy for monitoring internal and external radiation exposures of workers. It covers individual monitoring, and workplace monitoring to the extent required for assessment and control of individual radiation doses. The responsibilities of authorities for organizing the monitoring of radiation workers are discussed, and brief descriptions are given of the rules governing the implementation of monitoring methods. The general principles to be considered in selecting instrumentation and appropriate monitoring techniques are described, as well as calibrating techniques, methods of record keeping and related aspects

Gyroscope precession in special and general relativity from basic principles

Science.gov (United States)

Jonsson, Rickard M.

2007-05-01

In special relativity a gyroscope that is suspended in a torque-free manner will precess as it is moved along a curved path relative to an inertial frame S. We explain this effect, which is known as Thomas precession, by considering a real grid that moves along with the gyroscope, and that by definition is not rotating as observed from its own momentary inertial rest frame. From the basic properties of the Lorentz transformation we deduce how the form and rotation of the grid (and hence the gyroscope) will evolve relative to S. As an intermediate step we consider how the grid would appear if it were not length contracted along the direction of motion. We show that the uncontracted grid obeys a simple law of rotation. This law simplifies the analysis of spin precession compared to more traditional approaches based on Fermi transport. We also consider gyroscope precession relative to an accelerated reference frame and show that there are extra precession effects that can be explained in a way analogous to the Thomas precession. Although fully relativistically correct, the entire analysis is carried out using three-vectors. By using the equivalence principle the formalism can also be applied to static spacetimes in general relativity. As an example, we calculate the precession of a gyroscope orbiting a static black hole.

Photovoltaic Cells

OpenAIRE

Karolis Kiela

2012-01-01

The article deals with an overview of photovoltaic cells that are currently manufactured and those being developed, including one or several p-n junction, organic and dye-sensitized cells using quantum dots. The paper describes the advantages and disadvantages of various photovoltaic cells, identifies the main parameters, explains the main reasons for the losses that may occur in photovoltaic cells and looks at the ways to minimize them.Article in Lithuanian

Photovoltaic barometer

International Nuclear Information System (INIS)

2013-01-01

After the euphoria of 2011, the European Union's photovoltaic market slowed right down in 2012. EurObserv'ER puts newly connected capacity in 2012 at 16.5 GWp compared to 22 GWp in 2011, which is a 25% drop. At global level the market generally held up, with just over 30 GWp installed, bolstered by the build-up of the American and Asian markets. The photovoltaic electricity generated in the EU reached 68.1 TWh in 2012. The article begins with the description of the worldwide situation of photovoltaic electricity, then details the situation for each EU member with the help of tables and charts and ends with the state of photovoltaic industry at the world scale

Basic principles of quality assurance

International Nuclear Information System (INIS)

Stauffer, M.

1977-01-01

After a brief review of the origin of the 'quality concept' and the historical development of quality assurance, questions such as 'what is QA' and 'why is QA so important in nuclear technology' as well as definitions and main requirements of relevant QA codes and standards are presented and discussed. By means of a project realization schematic, tasks, duties, responsibilities, and possible QA organigrammes as well as QA programme and manual requirements are explained and compared. From a QA point of view, it is shown that no basic difference exists between design and production or construction control activities. Special emphasis is layed upon active owner's participation in the implementation of QA programmes for NPP and the advantages offered are described and illustrated by typical examples. (RW) [de

Photovoltaics in buildings. Final report; Photovoltaik in Gebaeuden. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Erge, T.; Hullmann, H.; Kaiser, R.; Kovach-Hebling, A.; Laukamp, H.; Reise, C.; Sauer, D.U.; Schmid, J.; Schmidt, H.; Sick, F.

1996-08-31

The feasibility in principle of photovoltaic plants integrated in buildings was proved in the 1980`s in the context of several pilot and demonstration projects both in Germany and internationally. However, the realisation and operation of these plants showed the necessity for further research and development work both in the system technique and particularly in the architectural area. The research project `Photovoltaics in buildings` reached the target of establishing a bridge between the technically orientated work of the researchers, developers and manufacturers of photovoltaic components on the one hand, and the architects and town planners on the other hand. (orig./AKF) [Deutsch] Die prinzipielle Machbarkeit gebaeudeintegrierter Photovoltaikanlagen wurde in den 80er Jahren im Rahmen mehrerer Pilot- und Demonstrationsprojekte sowohl in der Bundesrepublik Deutschland als auch international nachgewiesen. Die Realisierung und der Betrieb dieser Anlagen zeigte jedoch die Notwendigkeit weiterer Forschungs- und Entwicklungsarbeiten sowohl im systemtechnischen als insbesondere auch im architektonischen Bereich auf. Mit dem Forschungsprojekt `Photovoltaik in Gebaeuden` wurde das Ziel erreicht, eine Bruecke zu schlagen zwischen den eher technisch orientierten Arbeiten der Forscher, Entwickler und Hersteller von Photovoltaikkomponenten auf der einen Seite und den Architekten und Stadtplanern auf der anderen. (orig./AKF)

Photovoltaic mounting/demounting unit

DEFF Research Database (Denmark)

2014-01-01

The present invention relates to a photovoltaic arrangement comprising a photovoltaic assembly comprising a support structure defining a mounting surface onto which a photovoltaic module is detachably mounted; and a mounting/demounting unit comprising at least one mounting/demounting apparatus...... which when the mounting/demounting unit is moved along the mounting surface, causes the photovoltaic module to be mounted or demounted to the support structure; wherein the photovoltaic module comprises a carrier foil and wherein a total thickness of the photo voltaic module is below 500 muiotaeta....... The present invention further relates to an associated method for mounting/demounting photovoltaic modules....

Fundamental Principle for Quantum Theory

OpenAIRE

Khrennikov, Andrei

2002-01-01

We propose the principle, the law of statistical balance for basic physical observables, which specifies quantum statistical theory among all other statistical theories of measurements. It seems that this principle might play in quantum theory the role that is similar to the role of Einstein's relativity principle.

Irrigation water management: Basic principles and applications

OpenAIRE

Ella, Victor B.

2007-01-01

This presentation defines the term, irrigation, as well as explains the common methods of irrigation in attempt to define the fundamental principles needed to wisely design an irrigation system. It outlines a typical drip irrigation set-up, and discusses management of an irrigation system, including water volume application suggestions. LTRA-5 (Agroforestry and Sustainable Vegetable Production)

Basic principles of forest fuel reduction treatments

Science.gov (United States)

James K. Agee; Carl N. Skinner

2005-01-01

Successful fire exclusion in the 20th century has created severe fire problems across the West. Not every forest is at risk of uncharacteristically severe wildfire, but drier forests are in need of active management to mitigate fire hazard. We summarize a set of simple principles important to address in fuel reduction treatments: reduction of surface fuels, increasing...

EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

OpenAIRE

GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

2014-01-01

In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

Basic physics for all

CERN Document Server

Kumar, B N

2012-01-01

This is a simple, concise book for both student and non-physics students, presenting basic facts in straightforward form and conveying fundamental principles and theories of physics. This book will be helpful as a supplement to class teaching and to aid those who have difficulty in mastering concepts and principles.

Use of basic principle of nucleation in determining temperature-threshold neutron energy relationship in superheated emulsions

CERN Document Server

Das, M; Chatterjee, B K; Roy, S C

2003-01-01

Detection of neutrons through use of superheated emulsions has been known for about two decades. The minimum neutron energy (threshold) required to nucleate drops of a given liquid has a dependence on the temperature of the liquid. The basic principle of nucleation has been utilized to find the relationship between the operating temperature and threshold neutron energy for superheated emulsions made of R-114 liquid. The threshold energy thus determined for different temperatures has been compared with accurate experimental results obtained using monoenergetic neutron sources. The agreement is found to be satisfactory and confirms the applicability of the present simple method to other liquids.

Principle of coincidence method and application in activity measurement

International Nuclear Information System (INIS)

Li Mou; Dai Yihua; Ni Jianzhong

2008-01-01

The basic principle of coincidence method was discussed. The basic principle was generalized by analysing the actual example, and the condition in theory of coincidence method was brought forward. The cause of variation of efficiency curve and the effect of dead-time in activity measurement were explained using the above principle and condition. This principle of coincidence method provides the foundation in theory for activity measurement. (authors)

Application and design of solar photovoltaic system

International Nuclear Information System (INIS)

Li Tianze; Lu Hengwei; Jiang Chuan; Hou Luan; Zhang Xia

2011-01-01

Solar modules, power electronic equipments which include the charge-discharge controller, the inverter, the test instrumentation and the computer monitoring, and the storage battery or the other energy storage and auxiliary generating plant make up of the photovoltaic system which is shown in the thesis. PV system design should follow to meet the load supply requirements, make system low cost, seriously consider the design of software and hardware, and make general software design prior to hardware design in the paper. To take the design of PV system for an example, the paper gives the analysis of the design of system software and system hardware, economic benefit, and basic ideas and steps of the installation and the connection of the system. It elaborates on the information acquisition, the software and hardware design of the system, the evaluation and optimization of the system. Finally, it shows the analysis and prospect of the application of photovoltaic technology in outer space, solar lamps, freeways and communications.

THE BASIC PRINCIPLES OF THE INTEGRATED MANAGEMENT OF THE PROCESS OF ASSEMBLY AND THREADING

Directory of Open Access Journals (Sweden)

Anton Skorkin

2017-11-01

Full Text Available The subject matter of this article is the issues related to the integrated management of assembling operations of fastening and threading elements at all stages of their implementation. The goal is to develop the generalized structure of the data management system of the process of assembly and threading. The objectives are: to justify the principles of managing the assembly and threading process at each stage of the assembly to improve the efficiency of these operations, to study the power, accuracy and performance characteristics of the connections and to draw the conclusion that suggested the theory of assembly management is efficient. The following results are obtained. The article presents the analytical dependencies of the force indexes of threading in the course of the package and sheet assembly, including the tightening force while joining; the assembly of a multilayered package of dissimilar sheet materials was analyzed. On the basis of the theoretical analysis, the dependences of the power indices of threading during the package and sheet assembly were determined. The assembly of the package of sheet materials was investigated, including a multilayered package of dissimilar materials of a “metal-plastic” type. Conclusions. The process of assembling threaded joints with the use of management principles was used; these principles enable increasing the efficiency of the assembly process, reducing the complexity of the basic operations, and improving the quality of the joints obtained. The use adaptive control of the screwing speed on the main threading transitions is suggested for reducing the torque.  The technology of making threaded joints with given properties is developed, the main ways of increasing the efficiency of assembly and threading processes are determined on the basis of the integrated control system for the assembly process.

Applications of photovoltaics

International Nuclear Information System (INIS)

Pearsall, N.

1999-01-01

The author points out that although photovoltaics can be used for generating electricity for the same applications as many other means of generation, they really come into their own where disadvantages associated with an intermittent unpredictable supply are not severe. The paper discusses the advantages and disadvantages to be taken into account when considering a photovoltaic power system. Five main applications, based on the system features, are listed and explained. They are: consumer, professional, rural electrification, building-integrated, centralised grid connected and space power. A brief history of the applications of photovoltaics is presented with statistical data on the growth of installed capacity since 1992. The developing market for photovoltaics is discussed together with how environmental issues have become a driver for development of building-integrated photovoltaics

2D lateral heterostructures of group-III monochalcogenide: Potential photovoltaic applications

Science.gov (United States)

Cheng, Kai; Guo, Yu; Han, Nannan; Jiang, Xue; Zhang, Junfeng; Ahuja, Rajeev; Su, Yan; Zhao, Jijun

2018-04-01

Solar photovoltaics provides a practical and sustainable solution to the increasing global energy demand. Using first-principles calculations, we investigate the energetics and electronic properties of two-dimensional lateral heterostructures by group-III monochalcogenides and explore their potential applications in photovoltaics. The band structures and formation energies from supercell calculations demonstrate that these heterostructures retain semiconducting behavior and might be synthesized in laboratory using the chemical vapor deposition technique. According to the computed band offsets, most of the heterojunctions belong to type II band alignment, which can prevent the recombination of electron-hole pairs. Besides, the electronic properties of these lateral heterostructures can be effectively tailored by the number of layers, leading to a high theoretical power conversion efficiency over 20%.

A FEASIBILITY STUDY ON THE APPLICATION OF PHOTOVOLTAIC PANELS AS SUPPLEMENTARY POWER GENERATION FOR RESIDENCES IN SERRA CATARINENSE

OpenAIRE

Garcia, Dariu Schulle; Madruga, Gabriel Granzotto; Policapo Américo, Jonatas; Rodrigo de Oliveira, Joaquim; Frizzo Stefenon, Stéfano

2017-01-01

This article aims to present a study on the applicability of isolated photovoltaic systems. Therefore, it was necessary to conduct an economic feasibility analysis through a basic dimensioning of a photovoltaic power system, using as basis a residence located in the Serra Catarinense. This discussion was based on studies of Cabral et al (2013), Serrão (2010), and Vasconcelos (2013). The methodology was qualitative and quantitative by analyzing the inci...

Principle and Basic Characteristics of a Hybrid Variable-Magnetic-Force Motor

Science.gov (United States)

Sakai, Kazuto; Kuramochi, Satoru

Reduction in the power consumed by motors is important for energy saving in the case of electrical appliances and electric vehicles (EVs). The motors used for operating these devices operate at variable speeds. Further, the motors operate with a small load in the stationary mode and a large load in the starting mode. A permanent magnet motor can be operated at the rated power with a high efficiency. However, the efficiency is low at a small load or at a high speed because the large constant magnetic force results in substantial core loss. Furthermore, the flux-weakening current that decreases the voltage at a high speed leads to significant copper loss and core loss. Therefore, we have developed a new technique for controlling the magnetic force of a permanent magnet on the basis of the load or speed of the motor. In this paper, we propose a novel motor that can vary the magnetic flux of a permanent magnet and clarify the principle and basic characteristics of the motor. The new motor has a permanent magnet that is magnetized by the magnetizing coil of the stator. The analysis results show that the magnetic flux linkage of the motor can be changed from 37% to 100% that a high torque can be produced.

Customized color patterning of photovoltaic cells

Science.gov (United States)

Cruz-Campa, Jose Luis; Nielson, Gregory N.; Okandan, Murat; Lentine, Anthony L.; Resnick, Paul J.; Gupta, Vipin P.

2016-11-15

Photovoltaic cells and photovoltaic modules, as well as methods of making and using such photovoltaic cells and photovoltaic modules, are disclosed. More particularly, embodiments of the photovoltaic cells selectively reflect visible light to provide the photovoltaic cells with a colorized appearance. Photovoltaic modules combining colorized photovoltaic cells may be used to harvest solar energy while providing a customized appearance, e.g., an image or pattern.

Task 5. Grid interconnection of building integrated and other dispersed photovoltaic power systems. Grid-connected photovoltaic power systems: power value and capacity value of PV systems

Energy Technology Data Exchange (ETDEWEB)

Groppi, F.

2002-02-15

This report for the International Energy Agency (IEA) made by Task 5 of the Photovoltaic Power Systems (PVPS) programme takes a look at the power value and capacity value of photovoltaic power systems. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy. Task 5 deals with issues concerning grid-interconnection and dispersed PV power systems. This report summarises the results of a study aimed to assess the benefits that may be obtained when distributed PV production systems are present in a low-voltage grid. The basic aspects concerning the power-value and those related to the capacity-value are discussed. Data obtained from simulations are presented and discussed. A simple concept shows that great variation occurs if varying load patterns are taken into account. The power-value of PV generation in the grid varies instant by instant depending on the current level of power production and on the surrounding load conditions. Although the three case-studies considered do not cover all the possibilities of coupling between PV and loads, the results obtained show a good differentiation among users with PV production which leads to interesting conclusions.

Fermat and the Minimum Principle

Indian Academy of Sciences (India)

Arguably, least action and minimum principles were offered or applied much earlier. This (or these) principle(s) is/are among the fundamental, basic, unifying or organizing ones used to describe a variety of natural phenomena. It considers the amount of energy expended in performing a given action to be the least required ...

Photovoltaic energy barometer

International Nuclear Information System (INIS)

Anon.

2007-01-01

The european photovoltaic market once again reached the heights in 2006, thanks to the dynamism of the German market. White paper objectives have thus been fulfilled four years ahead of schedule. The european photovoltaic sector remains however very heterogeneous with both an ultra-dominant German market (estimated at 1150 MWp in 2006) and other countries of the European Union that vary from a few kWP to a few dozen MWp. This analysis provides statistical data on the market, the capacity installed during 2005 and 2006, the photovoltaic parks and the evolution of the photovoltaic cell production. (A.L.B.)

Photovoltaics. System design and practice

Energy Technology Data Exchange (ETDEWEB)

Haeberlin, Heinrich [Berne Univ. of Applied Sciences (Switzerland)

2012-07-01

''Photovoltaics'' is the direct conversion of sunlight to electrical energy. This environmentally friendly process is used today worldwide. In the informative and in English available specialist publication the possibilities but also the problems by using the direct conversion of sunlight to electric current and its feeding into the general power grid or isolated networks are described detailed and clearly. Beside solar cells also all other installation components are widely considered, e. g. solar modules, solar panels, secondary cells, charge controller as well as inverter and lightning protection. The book is completed with basic information from around the world and operational experiences for the calculation of profits.

Thermionic photovoltaic energy converter

Science.gov (United States)

Chubb, D. L. (Inventor)

1985-01-01

A thermionic photovoltaic energy conversion device comprises a thermionic diode mounted within a hollow tubular photovoltaic converter. The thermionic diode maintains a cesium discharge for producing excited atoms that emit line radiation in the wavelength region of 850 nm to 890 nm. The photovoltaic converter is a silicon or gallium arsenide photovoltaic cell having bandgap energies in this same wavelength region for optimum cell efficiency.

Performance of Partially Covered N Number of Photovoltaic Thermal (PVT) - Compound Parabolic Concentrator (CPC) Series Connected Water Heating System

OpenAIRE

Rohit Tripathi; Sumit Tiwari; G. N. Tiwari

2016-01-01

In present study, an approach is adopted where photovoltaic thermal flat plate collector is integrated with compound parabolic concentrator. Analytical expression of temperature dependent electrical efficiency of N number of partially covered Photovoltaic Thermal (PVT) - Compound Parabolic Concentrator (CPC) water collector connected in series has been derived with the help of basic thermal energy balance equations. Analysis has been carried for winter weather condition at Delhi location, Ind...

Transparent ultraviolet photovoltaic cells.

Science.gov (United States)

Yang, Xun; Shan, Chong-Xin; Lu, Ying-Jie; Xie, Xiu-Hua; Li, Bing-Hui; Wang, Shuang-Peng; Jiang, Ming-Ming; Shen, De-Zhen

2016-02-15

Photovoltaic cells have been fabricated from p-GaN/MgO/n-ZnO structures. The photovoltaic cells are transparent to visible light and can transform ultraviolet irradiation into electrical signals. The efficiency of the photovoltaic cells is 0.025% under simulated AM 1.5 illumination conditions, while it can reach 0.46% under UV illumination. By connecting several such photovoltaic cells in a series, light-emitting devices can be lighting. The photovoltaic cells reported in this Letter may promise the applications in glass of buildings to prevent UV irradiation and produce power for household appliances in the future.

Three-phase Photovoltaic Systems

DEFF Research Database (Denmark)

Kerekes, Tamas; Sera, Dezso; Máthé, Lászlo

2015-01-01

, detailing the different photovoltaic inverter structures and topologies as well as discussing the different control layers within a grid-connected photovoltaic plant. Modulation schemes for various photovoltaic inverter topologies, grid synchronization, current control, active and reactive power control......Photovoltaic technology has experienced unprecedented growth in the last two decades, transforming from mainly off-grid niche generation to a major renewable energy technology, reaching approximately 180 GW of capacity worldwide at the end of 2014. Large photovoltaic power plants interfacing...... the grid through a three-phase power electronic converter are now well on the way to becoming a major player in the power system in many countries. Therefore, this article gives an overview of photovoltaic systems with a focus on three-phase applications, presenting these both from a hardware point of view...

PET/TAC: Basic principles, physiological variants and artifacts; PET/TAC: Generalidades, variantes fisiologicas y artefactos

Energy Technology Data Exchange (ETDEWEB)

Jimenez V, A.M. [Especialista en Medicina Nuclear, Profa. Depto. Radiologia de la Facultad de Medicina, Universidad Complutense de Madrid, Madrid (Spain)

2007-07-01

This presentation is about the basic principles, physiologic variants and devices that work in the PET/TAC technique. Next the conclusions obtained in the same one are presented: For a correct evaluation of the PET/TAC images with FDG is necessary the knowledge of the image acquisition technique, as well as of the physiologic distribution of the FDG, variants of the normality, benign causes of captation and more frequent devices. The introduction of this hybrid procedure allows the correct anatomical localization and identification of the deposits of FDG largely avoiding false or doubtful interpretations, but it can also originate not specific devices existent in the conventional PET. The previous knowledge of the possible devices will make possible in certain cases its elimination and in other its identification avoiding incorrect interpretations. (Author)

Risk communication basics

Energy Technology Data Exchange (ETDEWEB)

Corrado, P.G. [Lawrence Livermore National Laboratory, CA (United States)

1995-12-31

In low-trust, high-concern situations, 50% of your credibility comes from perceived empathy and caring, demonstrated in the first 30 s you come in contact with someone. There is no second chance for a first impression. These and other principles contained in this paper provide you with a basic level of understanding of risk communication. The principles identified are time-tested caveats and will assist you in effectively communicating technical information.

Risk communication basics

International Nuclear Information System (INIS)

Corrado, P.G.

1995-01-01

In low-trust, high-concern situations, 50% of your credibility comes from perceived empathy and caring, demonstrated in the first 30 s you come in contact with someone. There is no second chance for a first impression. These and other principles contained in this paper provide you with a basic level of understanding of risk communication. The principles identified are time-tested caveats and will assist you in effectively communicating technical information

Flexo-photovoltaic effect.

Science.gov (United States)

Yang, Ming-Min; Kim, Dong Jik; Alexe, Marin

2018-04-19

It is highly desirable to discover photovoltaic mechanisms that enable a higher efficiency of solar cells. Here, we report that the bulk photovoltaic effect, which is free from the thermodynamic Shockley-Queisser limit but usually manifested only in noncentrosymmetric (piezoelectric or ferroelectric) materials, can be realized in any semiconductor, including silicon, by mediation of flexoelectric effect. We introduce strain gradients using either an atomic force microscope or a micron-scale indentation system, creating giant photovoltaic currents from centrosymmetric single crystals of SrTiO 3 , TiO 2 , and Si. This strain-gradient-induced bulk photovoltaic effect, which we call the flexo-photovoltaic effect, functions in the absence of a p - n junction. This finding may extend present solar cell technologies by boosting the solar energy conversion efficiency from a wide pool of established semiconductors. Copyright © 2018, American Association for the Advancement of Science.

Madrid principles of Nagorno-Karabakh settlement

Directory of Open Access Journals (Sweden)

K K Babayan

2014-12-01

Full Text Available As part of this work presents the analysis of the basic document and the legal framework of the peace settlement of the Nagorno-Karabakh conflict on the modern stage - «Madrid or Basic principles», presented to the sides of the negotiations at the OSCE ministerial conference in the Spanish capital Madrid in November 2007. The both side’s statements, international mediators and institutes form a legal background of the vector and the framework of the negotiation process. There are the fundamental differences and contradictions in the approaches of the sides of the negotiations to the «Basic principles» of the settlement in this article. The work contains a comparison of the various items and elements of the Madrid document both in relation to each other, and to the principles of international law.

Basic principles of chemistry and physical chemistry

International Nuclear Information System (INIS)

Colmenares, C.A.

1975-01-01

A course designed to provide communications between the designer of a system such as a mechanical engineer or a physicist and the material scientist such as a chemist or chemical engineer is presented. The topics discussed are stoichiometric principles, behavior of ideal gases, vapor pressure, humidity and saturation, solubility of gases in liquids, diffusion of gases, chemical reaction kinetics, and application of concepts to compatibility problems. The appendix provides problems to be used in conjunction with TV lectures

Photovoltaic cell

Science.gov (United States)

Gordon, Roy G.; Kurtz, Sarah

1984-11-27

In a photovoltaic cell structure containing a visibly transparent, electrically conductive first layer of metal oxide, and a light-absorbing semiconductive photovoltaic second layer, the improvement comprising a thin layer of transition metal nitride, carbide or boride interposed between said first and second layers.

Photovoltaic device

DEFF Research Database (Denmark)

2011-01-01

A photovoltaic cell module including a plurality of serially connected photovoltaic cells on a common substrate, each including a first electrode, a printed light-harvesting layer and a printed second electrode, wherein at least one of the electrodes is transparent, and wherein the second electrode...... of a first cell is printed such that it forms an electrical contact with the first electrode of an adjacent second cell without forming an electrical contact with the first electrode of the first cell or the light-harvesting layer of the second cell, and a method of making such photovoltaic cell modules....

The solar photovoltaic

International Nuclear Information System (INIS)

2016-02-01

This publication first outlines challenges and stakes related to the development of renewable energies, and more particularly of photovoltaic solar energy in France and in the World. Principles and applications (connected and autonomous systems) are briefly presented. Some key data regarding installed capacity and its evolution in France and in other countries are briefly commented. The knowledge status of this technology is discussed in terms of strengths (environmental and energetic benefits, modularity, fast decreasing costs, integration into building envelope, local investment and consumer commitment, an added value and job generating sector), and weaknesses (fluctuating production and impact on the supply-demand balance, local impact on the distribution grid, land use, cautions, a sector with some environmental impact, evolutions of the support arrangement in France). Actions undertaken by the ADEME in different areas (support to research and innovation, installation quality, promotion of technologies with less environmental impacts) are reviewed

Basic digital signal processing

CERN Document Server

Lockhart, Gordon B

1985-01-01

Basic Digital Signal Processing describes the principles of digital signal processing and experiments with BASIC programs involving the fast Fourier theorem (FFT). The book reviews the fundamentals of the BASIC program, continuous and discrete time signals including analog signals, Fourier analysis, discrete Fourier transform, signal energy, power. The text also explains digital signal processing involving digital filters, linear time-variant systems, discrete time unit impulse, discrete-time convolution, and the alternative structure for second order infinite impulse response (IIR) sections.

[Bioethics of principles].

Science.gov (United States)

Pérez-Soba Díez del Corral, Juan José

2008-01-01

Bioethics emerges about the tecnological problems of acting in human life. Emerges also the problem of the moral limits determination, because they seem exterior of this practice. The Bioethics of Principles, take his rationality of the teleological thinking, and the autonomism. These divergence manifest the epistemological fragility and the great difficulty of hmoralñ thinking. This is evident in the determination of autonomy's principle, it has not the ethical content of Kant's propose. We need a new ethic rationality with a new refelxion of new Principles whose emerges of the basic ethic experiences.

Urban photovoltaic electricity policies

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-10-15

This report for the International Energy Agency (IEA) made by Task 10 of the Photovoltaic Power Systems (PVPS) programme takes a look at urban photovoltaic electricity policies. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy as a significant and sustainable renewable energy option. The objective of Task 10 is stated as being to enhance the opportunities for wide-scale, solution-oriented application of photovoltaics in the urban environment. The goal of the study presented was to evaluate a standardised basis for urban policies regarding photovoltaic integration in a set of cities in the countries participating in the IEA's Task 10, Urban Scale PV. The investigation was focused on three topics: the present state of the policies, the prospects for future policies fostering photovoltaic deployment and the prospects for future policies to cope with large-scale photovoltaic integration. The first section analyses the state of the policies; this analysis is then confirmed in section 2, which deals with present obstacles to PV deployment and solutions to overcome them. The third section investigates future prospects for PV deployment with the question of mastering large scale integration. The report concludes that cities could formulate urban solutions by developing integrated, specific provisions for PV deployment in their urban infrastructure planning.

Photovoltaics: The present presages the future

International Nuclear Information System (INIS)

Thornton, J.; Brown, L.

1992-01-01

This article is a technical assessment on photovoltaics and what effect new technology has on the ability of photovoltaics to compete in the utility market. The topics of the article include the solar resource, photovoltaic cells and systems, thick and thin film cells, the spherical cell, photovoltaic modules and systems, photovoltaic economics and utility applications, and technology transfer programs in the area of photovoltaic manufacturing

Basic standards for radiation protection

International Nuclear Information System (INIS)

Webb, G.A.M.

1982-01-01

The basic standards for radiation protection have been based, for many years, on the recommendations of the International Commission of Radiological Protection. The three basic standards recommended by the Commission may be summarized as ''justification, optimization of protection and adherence to dose limitations. The applications of these basic principles to different aspects of protection are briefly summarized and the particular ways in which they have been applied to waste described in more detail. The application of dose limits, both in the control of occupational exposure and in regulating routine discharges of radioactive effluents is straight forward in principle although the measurement and calculational requirements may be substantial. Secondary standards such as derived limits may be extremely useful and the principles underlying their derivation will be described. Optimization of protection is inherently a more difficult concept to apply in protection and the various techniques used will be outlined by with particular emphasis on the use of cost benefit analysis are recommended by the ICRP. A review will be given of the problems involved in extending these basic concepts of the ICRP to probabilistic analyses such as those required for assessing the consequences of accidents or disruptive events in long term repositories. The particular difficulties posed by the very long timescales involved in the assessment of waste management practices will be discussed in some detail. (orig./RW)

Photovoltaic barometer

International Nuclear Information System (INIS)

Anon.

2011-01-01

The photovoltaic sector is continuing on track, just as the extent of solar energy's electricity-generating potential is dawning on the public mind. The annual global installation figure was up more than twofold in 2010 (rising from just short of 7000 MWp in 2009). It leapt to over 16000 MWp, bringing worldwide installed photovoltaic capacity close to 38000 MWp. The photovoltaic power generated in the European Union at the end of 2010 reached 22.5 TWh which means an additional capacity of 13023 MWp during 2010. Concerning the cumulated installed capacity, Germany and Spain rank first and second in the European Union with respectively 17370 MWp and 3808 MWp

Photovoltaic barometer

International Nuclear Information System (INIS)

2006-01-01

This annual evaluation is a synthesis of works published in 2006. Comparisons are presented between the wind power performances and European Commission White Paper and Biomass action plan objectives. The european Union photovoltaic market reached the limits of the sector supply capacity for the first time. Meanwhile the prospects of growth in the photovoltaic market are still just as good as before. Silicon producers have finally responded to the expectations of the photovoltaic industry by announcing new production capacities. These extensions led to massively investing in new production capacities, in phase with ever greater demand. This increase in demand remains, however dependent upon the energy policy. (A.L.B.)

Photovoltaic device and method

Science.gov (United States)

Cleereman, Robert J; Lesniak, Michael J; Keenihan, James R; Langmaid, Joe A; Gaston, Ryan; Eurich, Gerald K; Boven, Michelle L

2015-01-27

The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

The Importance of End Groups for Solution-Processed Small-Molecule Bulk-Heterojunction Photovoltaic Cells.

Science.gov (United States)

Duan, Ruomeng; Cui, Yong; Zhao, Yanfei; Li, Chen; Chen, Long; Hou, Jianhui; Wagner, Manfred; Baumgarten, Martin; He, Chang; Müllen, Klaus

2016-05-10

End groups in small-molecule photovoltaic materials are important owing to their strong influence on molecular stability, solubility, energy levels, and aggregation behaviors. In this work, a series of donor-acceptor pentads (D2 -A-D1 -A-D2 ) were designed and synthesized, aiming to investigate the effect of the end groups on the materials properties and photovoltaic device performance. These molecules share identical central A-D1 -A triads (with benzodithiophene as D1 and 6-carbonyl-thieno[3,4-b]thiophene as A), but with various D2 end groups composed of alkyl-substituted thiophene (T), thieno[3,2-b]thiophene (TT), and 2,2'-bithiophene (BT). The results indicate a relationship between conjugated segment/alkyl chain length of the end groups and the photovoltaic performance, which contributes to the evolving molecular design principles for high efficiency organic solar cells. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Photovoltaic systems in agriculture

International Nuclear Information System (INIS)

Corba, Z.; Katic, V.; Milicevic, D.

2009-01-01

This paper presents the possibility of using one of the renewable energy resources in agriculture. Specifically, the paper shows the possibility of converting solar energy into electricity through photovoltaic panels. The paper includes the analysis of the energy potential of solar radiation in the AP Vojvodina (Serbia). The results of the analysis can be used for the design of photovoltaic energy systems. The amount of solar energy on the territory of the province is compared with the same data from some European countries, in order to obtain a clear picture of the possibilities of utilization of this type of renewable sources. Three examples of possible application of photovoltaic systems are presented. The first relates to the consumer who is away from the electric distribution network - photovoltaic system in island mode. The remaining two examples relate to the application of photovoltaic power sources in manufacturing plants, flowers or vegetables. Applying photovoltaic source of electrical energy to power pumps for irrigation is highlighted

Photovoltaic Product Directory and Buyers Guide

Energy Technology Data Exchange (ETDEWEB)

Watts, R.L.; Smith, S.A.; Dirks, J.A.; Mazzucchi, R.P.; Lee, V.E.

1984-04-01

The directory guide explains photovoltaic systems briefly and shows what products are available off-the-shelf. Information is given to assist in designing a photovoltaic system and on financial incentives. Help is given for determining if photovoltaic products can meet a particular buyer's needs, and information is provided on actual photovoltaic user's experiences. Detailed information is appended on various financial incentives available from state and federal governments, sources of additional information on photovoltaics, sources of various photovoltaic products, and a listing of addresses of photovoltaic products suppliers. (LEW)

Photovoltaic power systems energy storage

International Nuclear Information System (INIS)

Buldini, P.L.

1991-01-01

Basically, the solar photovoltaic power system consists of: Array of solar panels; Charge/voltage stabilizer; Blocking diode and Storage device. The storage device is a very important part of the system due to the necessity to harmonize the inevitable time shift between energy supply and demand. As energy storage, different devices can be utilized, such as hydropumping, air or other gas compression, flywheel, superconducting magnet, hydrogen generation and so on, but actually secondary (rechargeable) electrochemical cells appear to be the best storage device, due to the direct use for recharge of the d.c. current provided by the solar panels, without any intermediate step of energy transformation and its consequent loss of efficiency

Basic Principles of Financial Planning in Ex-ante Deposit Insurance Schemes

Directory of Open Access Journals (Sweden)

Đurđica Ognjenović

2006-12-01

Full Text Available The paper explores main principles of financial planning in ex-ante deposit insurance schemes from a theoretical perspective and in terms of the EU Directive on deposit- guarantee schemes. Further on, the paper assesses how these principles and standards are used in financial planning in deposit insurance schemes around the world for annual budgeting, strategic planning and optimalization of available financial resources. After reviewing available references and different practices, the conclusion is that there are no clear internationally accepted principles for deposit insurers’ financial planning, except some broad and general guidelines. Practices in the industry differ significantly. Given the fact that deposit insurance is in fact a monopolistic business, lack of clear principles and lack of proper financial planning may lead to inadequacy of ex-ante funds and negligence on the side of the management of deposit insurance schemes.

Photovoltaic solar cell

Science.gov (United States)

Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J

2013-11-26

A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electicity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

Optoelectronic and Defect Properties in Earth Abundant Photovoltaic Materials: First-principle Calculations

Science.gov (United States)

Shi, Tingting

In this dissertation, a series of earth-abundant photovoltaic materials including lead halide perovskites, copper based compounds, and silicon are investigated via density functional theory (DFT). Firstly, we study the unique optoelectronic properties of perovskite CH3NH3PbI3 and CH3NH3PbBr 3. First-principle calculations show that CH3NH3PbI 3 perovskite solar cells exhibit remarkable optoelectronic properties that account for the high open circuit voltage (Voc) and long electron-hole diffusion lengths. Our results reveal that for intrinsic doping, dominant point defects produce only shallow levels. Therefore lead halide perovskites are expected to exhibit intrinsic low non-radiative recombination rates. The conductivity of perovskites can be tuned from p-type to n-type by controlling the growth conditions. For extrinsic defects, the p-type perovskites can be achieved by doping group-IA, -IB, or -VIA elements, such as Na, K, Rb, Cu, and O at I-rich growth conditions. We further show that despite a large band gap of 2.2 eV, the dominant defects in CH3 NH3PbBr3 also create only shallow levels. The photovoltaic properties of CH3NH3PbBr3 - based perovskite absorbers can be tuned via defect engineering. Highly conductive p-type CH3NH3PbBr3 can be synthesized under Br-rich growth conditions. Such CH3NH3PbBr 3 may be potential low-cost hole transporting materials for lead halide perovskite solar cells. All these unique defect properties of perovskites are largely due to the strong Pb lone-pair s orbital and I p (Br p) orbital antibonding coupling and the high ionicity of CH3NH3PbX3 (X=I, Br). Secondly, we study the optoelectronic properties of Cu-V-VI earth abundant compounds. These low cost thin films may have the good electronic and optical properties. We have studied the structural, electronic and optical properties of Cu3-V-VI4 compounds. After testing four different crystal structures, enargite, wurtzite-PMCA, famatinite and zinc-blend-PMCA, we find that Cu3PS4 and

Progress in basic principles of limitation in radiation protection

International Nuclear Information System (INIS)

Ramzaev, P.V.; Tarasov, S.I.; Troitskaya, M.N.; Ermolaeva, A.P.

1977-01-01

For purposes of limitation of harmful factors, e.g. radiation, it is proposed to divide all countless numbers of biological effects into three groups: 1) social important effects (ultimate and effects); 2) intermediate effects (different diseases etc.), which are connected with and controlled by the first group; 3) pure biological effects, importance of which is not known. To determine the first group effects there are identified four indices describing all significant sides of human life: time of life, life-time integral of mental and physical capacity for work, aesthetical satisfaction from organism itself, reproduction of descendants. They reflect the main social and individual interests related to functioning of organism. On the base of weighing these indices it is suggested the united general index of health in form of time of a full life. The united index can be used for different principles of limitation (based on threshold, acceptable risk, maximum benefit). To realize the principle of maximum public benefit as ideal principle in the future limitation all benefit and detriment from utilization of harmful sources must be expressed in the united index of health (instead of money), which is the greatest value of individual and society. Authors suggest to standartize ionizing radiation on the general methodological approaches that were acceptable to non-ionizing factors too

Modeling Photovoltaic Power

OpenAIRE

Mavromatakis, F.; Franghiadakis, Y.; Vignola, F.

2016-01-01

A robust and reliable model describing the power produced by a photovoltaic system is needed in order to be able to detect module failures, inverter malfunction, shadowing effects and other factors that may result to energy losses. In addition, a reliable model enables an investor to perform accurate estimates of the system energy production, payback times etc. The model utilizes the global irradiance reaching the plane of the photovoltaic modules since in almost all Photovoltaic (PV) facilit...

An introduction to the basic principles of health economics for those involved in the development and delivery of headache care.

Science.gov (United States)

Kernick, D

2005-09-01

Against a background of increasing demands on limited resources, health economics is gaining an increasing impact on decision making and a basic understanding of the subject is important for all those involved in headache research and service delivery at whatever level. This paper is not intended as a review of the literature in the area of headache economics but discusses some general principles of health economics from the perspective of headache, with a focus on cost of illness studies and economic evaluation.

Gamma-Ray Telescope and Uncertainty Principle

Science.gov (United States)

Shivalingaswamy, T.; Kagali, B. A.

2012-01-01

Heisenberg's Uncertainty Principle is one of the important basic principles of quantum mechanics. In most of the books on quantum mechanics, this uncertainty principle is generally illustrated with the help of a gamma ray microscope, wherein neither the image formation criterion nor the lens properties are taken into account. Thus a better…

Solar energy: photovoltaics

International Nuclear Information System (INIS)

Goetzberger, A.; Voss, B.; Knobloch, J.

1994-01-01

This textbooks covers the following topics: foundations of photovoltaics, solar energy, P-N junctions, physics of solar cells, high-efficiency solar cells, technology of Si solar cells, other solar cells, photovoltaic applications. (orig.)

Geometric photovoltaics applied to amorphous silicon thin film solar cells

Science.gov (United States)

Kirkpatrick, Timothy

Geometrically generalized analytical expressions for device transport are derived from first principles for a photovoltaic junction. Subsequently, conventional planar and unconventional coaxial and hemispherical photovoltaic architectures are applied to detail the device physics of the junction based on their respective geometry. For the conventional planar cell, the one-dimensional transport equations governing carrier dynamics are recovered. For the unconventional coaxial and hemispherical junction designs, new multi-dimensional transport equations are revealed. Physical effects such as carrier generation and recombination are compared for each cell architecture, providing insight as to how non-planar junctions may potentially enable greater energy conversion efficiencies. Numerical simulations are performed for arrays of vertically aligned, nanostructured coaxial and hemispherical amorphous silicon solar cells and results are compared to those from simulations performed for the standard planar junction. Results indicate that fundamental physical changes in the spatial dependence of the energy band profile across the intrinsic region of an amorphous silicon p-i-n junction manifest as an increase in recombination current for non-planar photovoltaic architectures. Despite an increase in recombination current, however, the coaxial architecture still appears to be able to surpass the efficiency predicted for the planar geometry, due to the geometry of the junction leading to a decoupling of optics and electronics.

Performance Ratios of Grid Connected Photovoltaic Systems and Theory of Errors

Directory of Open Access Journals (Sweden)

Javier Vilariño-García

2016-07-01

Full Text Available A detailed analysis of the different levels of dynamic performance of grid connected photovoltaic systems and its interface based on the development of a block diagram explaining the course of energy transformation from solar radiation incident on the solar modules until it becomes useful energy available in the mains. Indexes defined by the Spanish standard                 UNE-EN 61724: Monitoring photovoltaic systems: Guidelines for measurement, data exchange and analysis, are explained from the basics fundaments of block algebra and the transfer function of linear systems. The accuracy requirements demanded by the aforementioned standard for measuring these parameters are discussed in the theory of errors and the real limits of the results obtained. 

Road map for photovoltaic electricity

International Nuclear Information System (INIS)

2011-02-01

This road map aims at highlighting industrial, technological and social challenges, at elaborating comprehensive visions, at highlighting technological locks, and at outlining research needs for the photovoltaic sector. It considers the following sector components: preparation of photo-sensitive materials, manufacturing of photovoltaic cells, manufacturing of photovoltaic arrays, design and manufacturing of electric equipment to control photovoltaic arrays and to connect them to the grid. It highlights the demand for photovoltaic installations, analyzes the value chain, proposes a vision of the sector by 2050 and defines target for 2020, discusses needs for demonstration and experimentation

Concentrator Photovoltaics

CERN Document Server

Luque, Antonio L

2007-01-01

Photovoltaic solar-energy conversion is one of the most promising technologies for generating renewable energy, and conversion of concentrated sunlight can lead to reduced cost for solar electricity. In fact, photovoltaic conversion of concentrated sunlight insures an efficient and cost-effective sustainable power resource. This book gives an overview of all components, e.g. cells, concentrators, modules and systems, for systems of concentrator photovoltaics. The authors report on significant results related to design, technology, and applications, and also cover the fundamental physics and market considerations. Specific contributions include: theory and practice of sunlight concentrators; an overview of concentrator PV activities; a description of concentrator solar cells; design and technology of modules and systems; manufacturing aspects; and a market study.

Photovoltaic roof construction

Energy Technology Data Exchange (ETDEWEB)

Hawley, W.W.

1980-02-26

In a batten-seam roof construction employing at least one photovoltaic cell module, the electrical conduits employed with the at least one photovoltaic cell module are disposed primarily under the battens of the roof.

Quantum electronics basic theory

CERN Document Server

Fain, V M; Sanders, J H

1969-01-01

Quantum Electronics, Volume 1: Basic Theory is a condensed and generalized description of the many research and rapid progress done on the subject. It is translated from the Russian language. The volume describes the basic theory of quantum electronics, and shows how the concepts and equations followed in quantum electronics arise from the basic principles of theoretical physics. The book then briefly discusses the interaction of an electromagnetic field with matter. The text also covers the quantum theory of relaxation process when a quantum system approaches an equilibrium state, and explai

Photovoltaics: US aims for zero-energy

International Nuclear Information System (INIS)

Barbose, G.; Wiser, R.; Bolinger, M.

2006-01-01

The strategies used in nine US states to support the use of photovoltaics (PV) in new market-rate homes are described. Standard buy-down programmes, the use of competitive bidding to support renewable energy technologies in larger projects, and general research and development funding for clean energy and green buildings are discussed. Targeted efforts to support PV in new houses, and market impacts are considered. Basic lessons learnt are outlined and include the need to track key information about PV installations in new dwellings, to ensure adequate funding, to consider higher incentive levels, coordinate PV and energy efficiency programmes, cultivate the installer infrastructure, educate key professionals, and engage the building community

Organic Semiconductor Photovoltaics

Science.gov (United States)

Sariciftci, Niyazi Serdar

2005-03-01

Recent developments on organic photovoltaic elements are reviewed. Semiconducting conjugated polymers and molecules as well as nanocrystalline inorganic semiconductors are used in composite thin films. The photophysics of such photoactive devices is based on the photoinduced charge transfer from donor type semiconducting molecules onto acceptor type molecules such as Buckminsterfullerene, C60 and/or nanoparticles. Similar to the first steps in natural photosynthesis, this photoinduced electron transfer leads to a number of potentially interesting applications which include sensitization of the photoconductivity and photovoltaic phenomena. Examples of photovoltaic architectures are discussed with their potential in terrestrial solar energy conversion. Several materials are introduced and discussed for their photovoltaic activities. Furthermore, nanomorphology has been investigated with AFM, SEM and TEM. The morphology/property relationship for a given photoactive system is found to be a major effect.

Basic principles of diffusion-weighted imaging

International Nuclear Information System (INIS)

Bammer, Roland.

2003-01-01

In diffusion-weighted MRI (DWI), image contrast is determined by the random microscopic motion of water protons. During the last years, DWI has become an important modality in the diagnostic work-up of acute ischemia in the CNS. There are also a few promising reports about the application of DWI to other regions in the human body, such as the vertebral column or the abdomen. This manuscript provides an introduction into the basics of DWI and Diffusion Tensor imaging. The potential of various MR sequences in concert with diffusion preparation are discussed with respect to acquisition speed, spatial resolution, and sensitivity to bulk physiologic motion. More advanced diffusion measurement techniques, such as high angular resolution diffusion imaging, are also addressed

The p - n junction under nonuniform strains: general theory and application to photovoltaics

Science.gov (United States)

Guin, L.; Jabbour, M. E.; Triantafyllidis, N.

2018-01-01

It is well known that mechanical strains influence the electronic properties of semiconductor devices. Modeling the fully coupled mechanical, electrical, and electronic responses of semiconductors is therefore essential for predicting the effects of mechanical loading on their overall electronic response. In the first part of this paper, we develop a general continuum model that couples the mechanical, electrical, and electronic responses of a finitely deformable semiconductor. The proposed model accounts for the dependence of the band edge energies, densities of states, and electronic mobilities on strain. The governing equations are derived from the basic principles of the thermomechanics of electromagnetic continua undergoing electronic transport. In particular, we find that there exists electronically induced strains that can exceed their electromagnetic (Maxwell) counterparts by an order of magnitude. In the second part, motivated by applications that involve the bending of a photovoltaic cell, we use asymptotic methods to compute the current-voltage characteristic of a p - n junction under nonuniform strains. We find that, for a typical monocrystalline silicon solar cell, the changes in dark current are significant, i.e., of the order of 20% for strains of 0.2%.

Investigation of energy management strategies for photovoltaic systems - A predictive control algorithm

Science.gov (United States)

Cull, R. C.; Eltimsahy, A. H.

1983-01-01

The present investigation is concerned with the formulation of energy management strategies for stand-alone photovoltaic (PV) systems, taking into account a basic control algorithm for a possible predictive, (and adaptive) controller. The control system controls the flow of energy in the system according to the amount of energy available, and predicts the appropriate control set-points based on the energy (insolation) available by using an appropriate system model. Aspects of adaptation to the conditions of the system are also considered. Attention is given to a statistical analysis technique, the analysis inputs, the analysis procedure, and details regarding the basic control algorithm.

Basic principles and criteria for public health protection in the event of a nuclear accident

International Nuclear Information System (INIS)

Kiradzhiev, G.

1992-01-01

Decision making criteria for population protection in nuclear accidents are discussed, and in particular the three basic principles: 1) excluding the appearance of nonstostochastic effects that occur in the case of high individual doses; 2) weighing the risks of radiation damage if such measures are not taken; 3) optimization based on comparison of benefit and costs, using the same measures for costs of health injury to affected populations and of the protected measures to be taken. The decision making criteria developed in Bulgaria are based on international recommendations with lowered upper limit of the range for evacuation and specified doses for vulnerable groups, children and pregnant women. The organization and the specific problems of the following individual types of protective measures are described: sheltering; protection of respiratory organs; iodine prophylaxis; evacuation of the public. One major condition for ensuring protection is to provide the public with timely information on the actual situation and the necessary countermeasures. Such information should be released in a manner that allows for understanding the expediency and significance of actions to be taken. An important aspect of emergency planning consists in taking into consideration the conditions actually prevailing in the country. This is well illustrated in the principle designated as 'national level of challenge' taking into account a country's capabilities for introducing intervention levels and permissible dose levels. In the case of Bulgaria this still remains to be done in protective planning for accidents. (author)

Principles of musical acoustics

CERN Document Server

Hartmann, William M

2013-01-01

Principles of Musical Acoustics focuses on the basic principles in the science and technology of music. Musical examples and specific musical instruments demonstrate the principles. The book begins with a study of vibrations and waves, in that order. These topics constitute the basic physical properties of sound, one of two pillars supporting the science of musical acoustics. The second pillar is the human element, the physiological and psychological aspects of acoustical science. The perceptual topics include loudness, pitch, tone color, and localization of sound. With these two pillars in place, it is possible to go in a variety of directions. The book treats in turn, the topics of room acoustics, audio both analog and digital, broadcasting, and speech. It ends with chapters on the traditional musical instruments, organized by family. The mathematical level of this book assumes that the reader is familiar with elementary algebra. Trigonometric functions, logarithms and powers also appear in the book, but co...

Landauer's principle and the conservation of information

International Nuclear Information System (INIS)

Daffertshofer, A.; Plastino, A.R.

2005-01-01

Erasure of information requires the dissipation of a minimal amount of energy as being formulated in Landauer's principle. This profound concept in information processing has recently been derived by use of basic dynamical principles of statistical mechanics. We present an alternative derivation of Landauer's principle based on dynamical principles and certain properties of the Shannon-Gibbs-Boltzmann entropy, in particular (sub-)additivity

Photovoltaic cell module and method of forming

Science.gov (United States)

Howell, Malinda; Juen, Donnie; Ketola, Barry; Tomalia, Mary Kay

2017-12-12

A photovoltaic cell module, a photovoltaic array including at least two modules, and a method of forming the module are provided. The module includes a first outermost layer and a photovoltaic cell disposed on the first outermost layer. The module also includes a second outermost layer disposed on the photovoltaic cell and sandwiching the photovoltaic cell between the second outermost layer and the first outermost layer. The method of forming the module includes the steps of disposing the photovoltaic cell on the first outermost layer, disposing a silicone composition on the photovoltaic cell, and compressing the first outermost layer, the photovoltaic cell, and the second layer to form the photovoltaic cell module.

The Cyclical Relationship Approach in Teaching Basic Accounting Principles.

Science.gov (United States)

Golen, Steven

1981-01-01

Shows how teachers can provide a more meaningful presentation of various accounting principles by illustrating them through a cyclical relationship approach. Thus, the students see the entire accounting relationship as a result of doing business. (CT)

Photovoltaic power generation system free of bypass diodes

Science.gov (United States)

Lentine, Anthony L.; Okandan, Murat; Nielson, Gregory N.

2015-07-28

A photovoltaic power generation system that includes a solar panel that is free of bypass diodes is described herein. The solar panel includes a plurality of photovoltaic sub-modules, wherein at least two of photovoltaic sub-modules in the plurality of photovoltaic sub-modules are electrically connected in parallel. A photovoltaic sub-module includes a plurality of groups of electrically connected photovoltaic cells, wherein at least two of the groups are electrically connected in series. A photovoltaic group includes a plurality of strings of photovoltaic cells, wherein a string of photovoltaic cells comprises a plurality of photovoltaic cells electrically connected in series. The strings of photovoltaic cells are electrically connected in parallel, and the photovoltaic cells are microsystem-enabled photovoltaic cells.

Fiscal 2000 report on result of international joint demonstrative development of photovoltaic power generation system. Demonstrative research on photovoltaic power generation system interconnection system (Myanmar); 2000 nendo taiyoko hatsuden system kokusai kyodo jissho kaihatsu seika hokokusho. Taiyoko hatsuden keito renkei system jissho kenkyu (Myanmar)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Joint research was conducted with Myanmar on a photovoltaic power generation system interconnection system, for which fiscal 2000 results were described in this paper. Power generating facilities were set up consisting of 80kW photovoltaic, 40kW wind and 60kW diesel systems. With the photovoltaic and wind power generation connected to a small-scale power system as a ballast load, the system interconnection is formed through load adjusting equipment such as storage batteries. The hybrid system feeding is from 6 o'clock early in the morning until 23 late at night. The diesel power generation is free from restrictions. The operating method was set on system control (demand side management) by adjustment from the load side, with ballast load control employed that adjustably operates an ice machine load. The basic design was drafted in terms of a storage battery capacity of 1,000Ah and an ice machine load of 32kW. The daytime load was assumed to be 25% of the night load. On the equipment specifications set in this basic design, arrangement design was conducted for the equipment in the premises, making a land development plan and a basic construction plan including a temporary work site, construction steps, transportation and delivery of the equipment. Quantity of solar radiation and wind data were continuously observed. (NEDO)

Photovoltaics in the Department of Defense

International Nuclear Information System (INIS)

Chapman, R.N.

1997-01-01

This paper documents the history of photovoltaic use within the Department of Defense leading up to the installation of 2.1 MW of photovoltaics underway today. This history describes the evolution of the Department of Defense's Tri-Service Photovoltaic Review Committee and the committee's strategic plan to realize photovoltaic's full potential through outreach, conditioning of the federal procurement system, and specific project development. The Photovoltaic Review Committee estimates photovoltaic's potential at nearly 4,000 MW, of which about 700 MW are considered to be cost-effective at today's prices. The paper describes photovoltaic's potential within the Department of Defense, the status and features of the 2.1-MW worth of photovoltaic systems under installation, and how these systems are selected and implemented. The paper also documents support provided to the Department of Defense by the Department of Energy dating back to the late 70s. copyright 1997 American Institute of Physics

US photovoltaic patents: 1991--1993

Energy Technology Data Exchange (ETDEWEB)

Pohle, L

1995-03-01

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials as well as manufacturing and support functions. The patent entries in this document were issued from 1991 to 1993. The entries were located by searching USPA, the database of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors, and subjects only peripherally concerned with photovoltaic. Some patents on these three subjects were included when ft appeared that those inventions might be of use in terrestrial PV power technologies.

Re-Defining Photovoltaic Efficiency Through Molecule Scale Control. Final Report

Energy Technology Data Exchange (ETDEWEB)

Yardley, James T. [Columbia Univ., New York, NY (United States)

2015-04-30

The direct conversion of sunlight into electricity represents one of the most important general means for sustainable energy production. Most modern photovoltaic cells are based on some form of semiconductor material such as silicon that is described by a characteristic energy or ''bandgap''. For solar rays with photon energy lower than the bandgap no absorption occurs and thus no energy is generated. For solar rays with photon energy greater than the bandgap, light may be absorbed to create a pair of electrical charges but only one bandgap of energy is created, leaving any additional energy lost as heat. Thus low bandgap materials can use a great part of the spectrum but can lose much of that energy; high bandgap materials fail to capture much of the spectrum. Thus there is a limit to the efficiency of such a solar cell that turns out to be about 32%. This limit is known as the Shockely-Queisser Limit. The Columbia EFRC program is dedicated to exploration of concepts that in principle can provide for efficiencies beyond this limit. One concept that this EFRC has explored for enhancing the efficiency of solar photovoltaic cells is called “Singlet Fission.” In this concept the absorption of light rays with photon energy at least twice the value of the basic bandgap for the system can produce two pairs of electrical charge carriers. If properly implemented this in principle can significantly reduce the energy lost as heat and give rise to solar cell efficiencies greater than the Shockley-Queisser limit. The problem is that there are virtually no materials that can undergo this process effectively. We have developed new materials that have demonstrated singlet fission efficiencies of almost 100%. We understand how these materials work and we have learned how to design many more systems in the future. So far we have only demonstrated the basic capability for efficient singlet fission. Much more work will be required to design and engineer

Photovoltaic applications

International Nuclear Information System (INIS)

Sidrach, M.

1992-01-01

The most common terrestrial applications of photovoltaic plants are reviewed. Classification of applications can be done considering end-use sectors and load profiles (consumption demand). For those systems with direct coupling the working point is determined by the intersection of the load line with the I-V curve Design guidelines are provided for photovoltaic systems. This lecture focusses on the distribution system and safeguards

RENEWAL OF BASIC LAWS AND PRINCIPLES FOR POLAR CONTINUUM THEORIES (Ⅵ)-CONSERVATION LAWS OF MASS AND INERTIA

Institute of Scientific and Technical Information of China (English)

戴安民

2003-01-01

The purpose is to reestablish the coupled conservation laws, the local conservation equations and the jump conditions of mass and inertia for polar continuum theories. In this connection the new material derivatives of the deformation gradient, the line element, the surface element and the volume element were derived and the generalized Reynolds transport theorem was presented. Combining these conservation laws of mass and inertia with the balance laws of momentum, angular momentum and energy derived in our previous papers of this series, a rather complete system of coupled basic laws and principles for polar continuum theories is constituted on the whole. From this system the coupled nonlocal balance equations of mass, inertia, momentum, angular momentum and energy may be obtained by the usual localization.

Thin film photovoltaic panel and method

Science.gov (United States)

Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

1991-06-11

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Photovoltaic engineering handbook

Energy Technology Data Exchange (ETDEWEB)

Lasnier, F; Ang, T G [Asian Institute of Technolgoy, Bangkok (TH)

1990-01-01

The Photovoltaic Engineering Handbook is a comprehensive 'nuts and bolts' guide to photovoltaic technology and systems engineering aimed at engineers and designers in the field. It is the first book to look closely at the practical problems involved in evaluating and setting up a PV power system. The authors' comprehensive insight into the different procedures and decisions that a designer needs to make. The book is unique in its coverage and the technical information is presented in a concise and simple way to enable engineers from a wide range of backgrounds to initiate, assess, analyse and design a PV system. Energy planners making decisions on the most appropriate system for specific needs will also benefit from reading this book. Topics covered include technological processes, including solar cell technology, the photovoltaic generator, photovoltaic systems engineering; characterization and testing methods, sizing procedure; economic analysis and instrumentation. (author).

Intelligent system for a remote diagnosis of a photovoltaic solar power plant

International Nuclear Information System (INIS)

Sanz-Bobi, M A; San Roque, A Muñoz; Marcos, A de; Bada, M

2012-01-01

Usually small and mid-sized photovoltaic solar power plants are located in rural areas and typically they operate unattended. Some technicians are in charge of the supervision of these plants and, if an alarm is automatically issued, they try to investigate the problem and correct it. Sometimes these anomalies are detected some hours or days after they begin. Also the analysis of the causes once the anomaly is detected can take some additional time. All these factors motivated the development of a methodology able to perform continuous and automatic monitoring of the basic parameters of a photovoltaic solar power plant in order to detect anomalies as soon as possible, to diagnose their causes, and to immediately inform the personnel in charge of the plant. The methodology proposed starts from the study of the most significant failure modes of a photovoltaic plant through a FMEA and using this information, its typical performance is characterized by the creation of its normal behaviour models. They are used to detect the presence of a failure in an incipient or current form. Once an anomaly is detected, an automatic and intelligent diagnosis process is started in order to investigate the possible causes. The paper will describe the main features of a software tool able to detect anomalies and to diagnose them in a photovoltaic solar power plant.

First-principles study of electronic structure of CuSbS{sub 2} and CuSbSe{sub 2} photovoltaic semiconductors

Energy Technology Data Exchange (ETDEWEB)

Maeda, T., E-mail: tmaeda@ad.ryukoku.ac.jp; Wada, T.

2015-05-01

We studied the features of CuSbS{sub 2} (CAS) and CuSbSe{sub 2} (CASe), two proposed photovoltaic compounds, and clarified their electronic structures by first-principles calculations and compared them to the chalcopyrite-type CuInSe{sub 2} results. For both CAS and CASe, the calculated enthalpies of formation of the chalcostibite phases were considerably lower than those of the chalcopyrite phases. Therefore, we considered that the chalcostibite phase is more stable for CAS and CASe. In their band structure calculated with the HSE06 hybrid functional, the valence band maxima of CAS and CASe were located at the Γ-point, and the conduction band minima were located at the R-point. Their second lowest conduction band was located at the Γ-point, whose energy level nearly equaled the R-point. For CAS (CASe), the partial density of the states shows the character of the Cu 3d and S 3p (Se 4p) orbitals at the top of the valence bands and the Sb 5p and S 3p (Se 4p) orbitals at the bottom of the conduction bands. The conduction bands of CAS and CASe have a p-orbital character (Sb 5p) that differs from the s-orbital character (In 5s) of CuInSe{sub 2}. It is for the reason that CAS and CASe do not have a chalcopyrite structure but a chalcostibite-type structure. The calculated absorption coefficient of CuSbS{sub 2} (10{sup 4}-10{sup 5} cm{sup −1}) is comparable to that of CuInSe{sub 2}. - Highlights: • We studied the features of CuSbS{sub 2} and CuSbSe{sub 2}, newly proposed photovoltaic compounds. • Chalcostibite phase is more stable in CuSbS{sub 2} and CuSbSe{sub 2}. • Band structures of CuSbS{sub 2} and CuSbS{sub 2} were calculated with HSE06 hybrid functional. • Absorption coefficient of chalcostibite-type CuSbS{sub 2} is comparable to that of CuInSe{sub 2}.

Solar Photovoltaic Cells.

Science.gov (United States)

Mickey, Charles D.

1981-01-01

Reviews information on solar radiation as an energy source. Discusses these topics: the key photovoltaic material; the bank theory of solids; conductors, semiconductors, and insulators; impurity semiconductors; solid-state photovoltaic cell operation; limitations on solar cell efficiency; silicon solar cells; cadmium sulfide/copper (I) sulfide…

Can photovoltaic replace nuclear?

International Nuclear Information System (INIS)

2017-01-01

As the French law on energy transition for a green growth predicts that one third of nuclear energy production is to be replaced by renewable energies (wind and solar) by 2025, and while the ADEME proposes a 100 per cent renewable scenario for 2050, this paper proposes a brief analysis of the replacement of nuclear energy by solar photovoltaic energy. It presents and discusses some characteristics of photovoltaic production: production level during a typical day for each month (a noticeable lower production in December), evolution of monthly production during a year, evolution of the rate between nuclear and photovoltaic production. A cost assessment is then proposed for energy storage and for energy production, and a minimum cost of replacement of nuclear by photovoltaic is assessed. The seasonal effect is outlined, as well as the latitude effect. Finally, the authors outline the huge cost of such a replacement, and consider that public support to new photovoltaic installations without an at least daily storage mean should be cancelled

Organic photovoltaics. Technology and market

International Nuclear Information System (INIS)

Brabec, Christoph J.

2004-01-01

Organic photovoltaics has come into the international research focus during the past three years. Up to now main efforts have focused on the improvement of the solar conversion efficiency, and in recent efforts 5% white light efficiencies on the device level have been realized. Despite this in comparison to inorganic technologies low efficiency, organic photovoltaics is evaluated as one of the future key technologies opening up completely new applications and markets for photovoltaics. The key property which makes organic photovoltaics so attractive is the potential of reel to reel processing on low cost substrates with standard coating and printing processes. In this contribution we discuss the economical and technical production aspects for organic photovoltaics

A survey of variational principles

International Nuclear Information System (INIS)

Lewins, J.D.

1993-01-01

In this article survey of variational principles has been given. Variational principles play a significant role in mathematical theory with emphasis on the physical aspects. There are two principals used i.e. to represent the equation of the system in a succinct way and to enable a particular computation in the system to be carried out with greater accuracy. The survey of variational principles has ranged widely from its starting point in the Lagrange multiplier to optimisation principles. In an age of digital computation, these classic methods can be adapted to improve such calculations. We emphasize particularly the advantage of basic finite element methods on variational principles. (A.B.)

Roof Photovoltaic Test Facility

Data.gov (United States)

Federal Laboratory Consortium — In order to accurately predict the annual energy production of photovoltaic systems for any given geographical location, building orientation, and photovoltaic cell...

Photovoltaic solar energy. Proceedings; Photovoltaische Solarenergie. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Within the 21st symposium 'Photovoltaic Solar Energy' of the Ostbayerisches Technologie-Transfer-Institut e.V. (Regensburg, Federal Republic of Germany) at Banz Monastery (Bad Staffelstein, Federal Republic of Germany) between 8th and 10th March, 2006, the following lessons were held: (1) Basic conditions for a market support programme in the European context (EEG) (Winfried Hoffmann); (2) Actual developments in the German market of photovoltaics (Gerhard Stryi-Hipp); (3) Become a part of the global economic survey of Task 2 ''PV cost over time'' (Thomas Nordmann); (4) The market of photovoltaic will be a European market in the future (Murray Cameron); (5) Development and state of the art of the photovoltaic industry in the Peoples Republic of China (Frank Haugwitz); (6) Silicon for the photovoltaic industry (Karl Hesse); (7) Cell technology: Impulses for a cost effective photovoltaic with valuable silicon (Rolf Brendel); (8) Thin-film solar modules for the photovoltaic - state of the art and industrial perspectives (Michael Powalla); (9) Modules - bottleneck and flood of orders: How to act an installer? (Helmut Godard); (10) Photovoltaic open-field systems - Actual experiences and conflict lines (Ole Langniss); (11) Comparison of actual and future trends of Balance-of-System costs for large scale ground based PV systems with crystalline and thin-film modules (Manfred Baechler); (12) Financing PX projects from a Bank perspective (Joachim Treder); (13) Criteria of quality for solar fonds - Criteria of evaluation for capital investors and self-commitment for emission houses (Ulla Meixner); (14) Analysis of the distribution pathways for photovoltaic plants from the manufacturer to the final customer considering the decreasing demand and increasing prices (Michael Forst); (15) Solar power 2005 - Evaluation of real operational data of 1,000 plants in Germany (Gerd Heilscher); (16) Improvement of PV-inverter efficiency - targets, pathways

Basics of statistical physics

CERN Document Server

Müller-Kirsten, Harald J W

2013-01-01

Statistics links microscopic and macroscopic phenomena, and requires for this reason a large number of microscopic elements like atoms. The results are values of maximum probability or of averaging. This introduction to statistical physics concentrates on the basic principles, and attempts to explain these in simple terms supplemented by numerous examples. These basic principles include the difference between classical and quantum statistics, a priori probabilities as related to degeneracies, the vital aspect of indistinguishability as compared with distinguishability in classical physics, the differences between conserved and non-conserved elements, the different ways of counting arrangements in the three statistics (Maxwell-Boltzmann, Fermi-Dirac, Bose-Einstein), the difference between maximization of the number of arrangements of elements, and averaging in the Darwin-Fowler method. Significant applications to solids, radiation and electrons in metals are treated in separate chapters, as well as Bose-Eins...

European and Czech principles of contract law

OpenAIRE

Horáková, Monika

2008-01-01

8 Summary European and Czech Principles of Contract Law This thesis is focused on principles of contract law. In the first instance, it explains the theoretical conception of principles of law and adverts to their status in the Czech legal system. The second Chapter of the thesis dissertates about basic principles of the Czech private law starting with the principle of freedom of contract, ends with the principles of good faith and fair dealing. The main part of the thesis deals with the Euro...

US Photovoltaic Patents, 1988--1990

Energy Technology Data Exchange (ETDEWEB)

1991-12-01

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

SHADOW EFFECT ON PHOTOVOLTAIC POTENTIALITY ANALYSIS USING 3D CITY MODELS

Directory of Open Access Journals (Sweden)

N. Alam

2012-07-01

Full Text Available Due to global warming, green-house effect and various other drawbacks of existing energy sources, renewable energy like Photovoltaic system is being popular for energy production. The result of photovoltaic potentiality analysis depends on data quality and parameters. Shadow rapidly decreases performance of the Photovoltaic system and it always changes due to the movement of the sun. Solar radiation incident on earth's atmosphere is relatively constant but the radiation at earth's surface varies due to absorption, scattering, reflection, change in spectral content, diffuse component, water vapor, clouds and pollution etc. In this research, it is being investigated that how efficiently real-time shadow can be detected for both direct and diffuse radiation considering reflection and other factors in contrast with the existing shadow detection methods using latest technologies and what is the minimum quality of data required for this purpose. Of course, geometric details of the building geometry and surroundings directly affect the calculation of shadows. In principle, 3D city models or point clouds, which contain roof structure, vegetation, thematically differentiated surface and texture, are suitable to simulate exact real-time shadow. This research would develop an automated procedure to measure exact shadow effect from the 3D city models and a long-term simulation model to determine the produced energy from the photovoltaic system. In this paper, a developed method for detecting shadow for direct radiation has been discussed with its result using a 3D city model to perform a solar energy potentiality analysis.

Interactive computing in BASIC an introduction to interactive computing and a practical course in the BASIC language

CERN Document Server

Sanderson, Peter C

1973-01-01

Interactive Computing in BASIC: An Introduction to Interactive Computing and a Practical Course in the BASIC Language provides a general introduction to the principles of interactive computing and a comprehensive practical guide to the programming language Beginners All-purpose Symbolic Instruction Code (BASIC). The book starts by providing an introduction to computers and discussing the aspects of terminal usage, programming languages, and the stages in writing and testing a program. The text then discusses BASIC with regard to methods in writing simple arithmetical programs, control stateme

Photovoltaic Wire, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will investigate a new architecture for photovoltaic devices based on nanotechnology: photovoltaic wire. The...

Solar Photovoltaic Energy.

Science.gov (United States)

Ehrenreich, Henry; Martin, John H.

1979-01-01

The goals of solar photovoltaic technology in contributing to America's future energy needs are presented in this study conducted by the American Physical Society. Although the time needed for photovoltaics to become popular is several decades away, according to the author, short-range applications are given. (Author/SA)

Organic photovoltaics

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

Within the International Conference and Exhibition at 16th September,2010 at the Maritim Hotel (Wuerzburg, Federal Republic of Germany) the following lectures were held: (1) History of Organic Photovoltaics (Niyazi Serdar Sariciftci); (2) PV Activities at the ZAE Bayern (Vladimir Dyakonov); (3) Progress in Solid State DSC (Peter Erk); (4) Polymer Semiconductors for OPV (Mats Andersson); (5) Fullerene Derivative N-Types in Organic Solar Cells (David Kronholm); (6) Modelling Charge-Transport in Organic Photovoltaic Materials (Jenny Nelson); (7) Multi Junction Modules R and D Status and Outlook (Paul Blom); (8) Imaging Technologies for Organic Solar Cells (Jonas Bachmann); (9) Production of Multi-junction Organic Photovoltaic Cells and Modules (Martin Pfeiffer); (10) Upscaling of Polymer Solar Cell Fabrication Using Full Roll-to-roll Processing (Frederik Christian Krebs); (11) Industrial Aspects and Large Scale OPV Production (Jens Hauch).

Enlarging photovoltaic effect: combination of classic photoelectric and ferroelectric photovoltaic effects.

Science.gov (United States)

Zhang, Jingjiao; Su, Xiaodong; Shen, Mingrong; Dai, Zhihua; Zhang, Lingjun; He, Xiyun; Cheng, Wenxiu; Cao, Mengyu; Zou, Guifu

2013-01-01

Converting light energy to electrical energy in photovoltaic devices relies on the photogenerated electrons and holes separated by the built-in potential in semiconductors. Photo-excited electrons in metal electrodes are usually not considered in this process. Here, we report an enhanced photovoltaic effect in the ferroelectric lanthanum-modified lead zirconate titanate (PLZT) by using low work function metals as the electrodes. We believe that electrons in the metal with low work function could be photo-emitted into PLZT and form the dominant photocurrent in our devices. Under AM1.5 (100 mW/cm²) illumination, the short-circuit current and open-circuit voltage of Mg/PLZT/ITO are about 150 and 2 times of those of Pt/PLZT/ITO, respectively. The photovoltaic response of PLZT capacitor was expanded from ultraviolet to visible spectra, and it may have important impact on design and fabrication of high performance photovoltaic devices based on ferroelectric materials.

Vaccinology: principles and practice

National Research Council Canada - National Science Library

Morrow, John

2012-01-01

... principles to implementation. This is an authoritative textbook that details a comprehensive and systematic approach to the science of vaccinology focusing on not only basic science, but the many stages required to commercialize...

Photovoltaic technologies

OpenAIRE

Bagnall, Darren M; Boreland, Matt

2008-01-01

Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power in...

Photovoltaic barometer

International Nuclear Information System (INIS)

Anon.

2009-01-01

spain and Germany set the pace for the world photovoltaic market in 2008, which grew to more than twice its 2007 size. The European Union continued to drive photocell installation with an additional 4 592.3 MWp in 2008, or 151.6% growth over 2007. However, European growth prospects for the photovoltaic market in 2009 are being dampened by the global financial crisis and the scheduled slow-down of the Spanish market. (author)

Thin Film Photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Zweibel, K.

1998-11-19

The motivation to develop thin film technologies dates back to the inception of photovoltaics. It is an idea based on achieving truly low-cost photovoltaics appropriate for mass production and energy significant markets. The key to the idea is the use of pennies worth of active materials. Since sunlight carries relatively little energy in comparison with combustion-based energy sources, photovoltaic (PV) modules must be cheap to produce energy that can be competitive. Thin films are presumed to be the answer to that low-cost requirement. But how cheap do they have to be? The following is an oversimplified analysis that allows some insight into this question.

Acetylene-Based Materials in Organic Photovoltaics

Directory of Open Access Journals (Sweden)

Fabio Silvestri

2010-04-01

Full Text Available Fossil fuel alternatives, such as solar energy, are moving to the forefront in a variety of research fields. Organic photovoltaic systems hold the promise of a lightweight, flexible, cost-effective solar energy conversion platform, which could benefit from simple solution-processing of the active layer. The discovery of semiconductive polyacetylene by Heeger et al. in the late 1970s was a milestone towards the use of organic materials in electronics; the development of efficient protocols for the palladium catalyzed alkynylation reactions and the new conception of steric and conformational advantages of acetylenes have been recently focused the attention on conjugated triple-bond containing systems as a promising class of semiconductors for OPVs applications. We review here the most important and representative (polyarylacetylenes that have been used in the field. A general introduction to (polyarylacetylenes, and the most common synthetic approaches directed toward making these materials will be firstly given. After a brief discussion on working principles and critical parameters of OPVs, we will focus on molecular arylacetylenes, (copolymers containing triple bonds, and metallopolyyne polymers as p-type semiconductor materials. The last section will deal with hybrids in which oligomeric/polymeric structures incorporating acetylenic linkages such as phenylene ethynylenes have been attached onto C60, and their use as the active materials in photovoltaic devices.

Photovoltaic energy systems. Program summary

Energy Technology Data Exchange (ETDEWEB)

None

1982-01-01

The ongoing research, development, and demonstration efforts of the Photovoltaics Program are highlighted and each of the US Department of Energy's current photovoltaics projects initiated or renewed during fiscal year 1981 is described, including its title, directing organization, project engineer, contractor, principal investigator, contract period, funding, and objectives. The Photovoltaics Program is briefly summarized, including the history and organization and highlights of the research and development and of planning, assessment, and integration. Also summarized is the Federal Photovoltaic Utilization Program. An exhaustive bibliography is included. (LEW)

2 CFR Appendix A to Part 230 - General Principles

Science.gov (United States)

2010-01-01

... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false General Principles A Appendix A to Part 230 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES FOR... Principles General Principles Table of Contents A. Basic Considerations 1. Composition of total costs 2...

Basic Knowledge for Market Principle: Approaches to the Price Coordination Mechanism by Using Optimization Theory and Algorithm

Science.gov (United States)

Aiyoshi, Eitaro; Masuda, Kazuaki

On the basis of market fundamentalism, new types of social systems with the market mechanism such as electricity trading markets and carbon dioxide (CO2) emission trading markets have been developed. However, there are few textbooks in science and technology which present the explanation that Lagrange multipliers can be interpreted as market prices. This tutorial paper explains that (1) the steepest descent method for dual problems in optimization, and (2) Gauss-Seidel method for solving the stationary conditions of Lagrange problems with market principles, can formulate the mechanism of market pricing, which works even in the information-oriented modern society. The authors expect readers to acquire basic knowledge on optimization theory and algorithms related to economics and to utilize them for designing the mechanism of more complicated markets.

Photocurrent extraction efficiency in colloidal quantum dot photovoltaics

KAUST Repository

Kemp, K. W.; Wong, C. T. O.; Hoogland, S. H.; Sargent, E. H.

2013-01-01

The efficiency of photocurrent extraction was studied directly inside operating Colloidal Quantum Dot (CQD) photovoltaic devices. A model was derived from first principles for a thin film p-n junction with a linearly spatially dependent electric field. Using this model, we were able to clarify the origins of recent improvement in CQD solar cell performance. From current-voltage diode characteristics under 1 sun conditions, we extracted transport lengths ranging from 39 nm to 86 nm for these materials. Characterization of the intensity dependence of photocurrent extraction revealed that the dominant loss mechanism limiting the transport length is trap-mediated recombination. © 2013 AIP Publishing LLC.

Photovoltaic Bias Generator

Science.gov (United States)

2018-02-01

Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an... Interior view of the photovoltaic bias generator showing wrapped-wire side of circuit board...3 Fig. 4 Interior view of the photovoltaic bias generator showing component side of circuit board

Transparent contacts for stacked compound photovoltaic cells

Science.gov (United States)

Tauke-Pedretti, Anna; Cederberg, Jeffrey; Nielson, Gregory N.; Okandan, Murat; Cruz-Campa, Jose Luis

2016-11-29

A microsystems-enabled multi-junction photovoltaic (MEM-PV) cell includes a first photovoltaic cell having a first junction, the first photovoltaic cell including a first semiconductor material employed to form the first junction, the first semiconductor material having a first bandgap. The MEM-PV cell also includes a second photovoltaic cell comprising a second junction. The second photovoltaic cell comprises a second semiconductor material employed to form the second junction, the second semiconductor material having a second bandgap that is less than the first bandgap, the second photovoltaic cell further comprising a first contact layer disposed between the first junction of the first photovoltaic cell and the second junction of the second photovoltaic cell, the first contact layer composed of a third semiconductor material having a third bandgap, the third bandgap being greater than or equal to the first bandgap.

Photovoltaic array mounting apparatus, systems, and methods

Science.gov (United States)

West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

2016-01-05

A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

Basic principles of RF superconductivity and superconducting cavities

OpenAIRE

Schmüser, P

2006-01-01

The basics of superconductivity are outlined with special emphasis on the features which are relevant for the application of superconductors in radio frequency cavities for particle acceleration. For a cylindrical resonator (“pill box cavity”) the electromagnetic field in the cavity and important parameters such as resonance frequency, quality factor and shunt impedance are calculated analytically. The design and performance of practical cavities is shortly addressed.

Development of low-cost silicon crystal growth techniques for terrestrial photovoltaic solar energy conversion

Science.gov (United States)

Zoutendyk, J. A.

1976-01-01

Because of the growing need for new sources of electrical energy, photovoltaic solar energy conversion is being developed. Photovoltaic devices are now being produced mainly from silicon wafers obtained from the slicing and polishing of cylindrically shaped single crystal ingots. Inherently high-cost processes now being used must either be eliminated or modified to provide low-cost crystalline silicon. Basic to this pursuit is the development of new or modified methods of crystal growth and, if necessary, crystal cutting. If silicon could be grown in a form requiring no cutting, a significant cost saving would potentially be realized. Therefore, several techniques for growth in the form of ribbons or sheets are being explored. In addition, novel techniques for low-cost ingot growth and cutting are under investigation.

Back to basics audio

CERN Document Server

Nathan, Julian

1998-01-01

Back to Basics Audio is a thorough, yet approachable handbook on audio electronics theory and equipment. The first part of the book discusses electrical and audio principles. Those principles form a basis for understanding the operation of equipment and systems, covered in the second section. Finally, the author addresses planning and installation of a home audio system.Julian Nathan joined the audio service and manufacturing industry in 1954 and moved into motion picture engineering and production in 1960. He installed and operated recording theaters in Sydney, Austra

Exergy analysis of integrated photovoltaic thermal solar water heater under constant flow rate and constant collection temperature modes

NARCIS (Netherlands)

Tiwari, A.; Dubey, Swapnil; Sandhu, G.S.; Sodha, M.S.; Anwar, S.I.

2009-01-01

In this communication, an analytical expression for the water temperature of an integrated photovoltaic thermal solar (IPVTS) water heater under constant flow rate hot water withdrawal has been obtained. Analysis is based on basic energy balance for hybrid flat plate collector and storage tank,

Development and Testing of a Prototype Grid-Tied Photovoltaic Power System

Science.gov (United States)

Eichenberg, Dennis J.

2009-01-01

The NASA Glenn Research Center (GRC) has developed and tested a prototype 2 kW DC grid-tied photovoltaic (PV) power system at the Center. The PV system has generated in excess of 6700 kWh since operation commenced in July 2006. The PV system is providing power to the GRC grid for use by all. Operation of the prototype PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provide valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the prototype PV system, additional PV power system expansion at GRC is under consideration. The prototype grid-tied PV power system was successfully designed and developed which served to validate the basic principles described, and the theoretical work that was performed. The report concludes that grid-tied photovoltaic power systems are reliable, maintenance free, long life power systems, and are of significant value to NASA and the community.

Photovoltaics in Poland

International Nuclear Information System (INIS)

Pietruszko, Stanislaw M.

2003-01-01

The legislative framework and financing possibilities for photovoltaics (PV) in Poland are presented. Barriers that exist or can be encountered in implementing PV technology in Poland are identified. This paper also discusses future prospects and possibilities for developing photovoltaics in Poland. Finally, the paper suggests ways to promote, disseminate, and deploy PV technology in Poland. (Author)

Basic equations of the quasiparticle-phonon nuclear model with the effects due to the Pauli principle and the phonon ground state correlations

International Nuclear Information System (INIS)

Nguyen Dinh Dang; Voronov, V.V.

1983-01-01

A system of basic equations of the quasiparticle-phonon model is obtained for energies and a structure of excited states described by the wave functions containing one- and two-phonon components. The effects due to the Pauli principle for two-phonon components and the phonon ground state correlations of a spherical nucleus are taken here into account. The quantitative estimations of these effects are given by a simplified scheme. The relation between these equations with the results from other theoretical approaches is discussed

Clean electricity from photovoltaics

CERN Document Server

Green, Martin A

2015-01-01

The second edition of Clean Electricity from Photovoltaics , first published in 2001, provides an updated account of the underlying science, technology and market prospects for photovoltaics. All areas have advanced considerably in the decade since the first edition was published, which include: multi-crystalline silicon cell efficiencies having made impressive advances, thin-film CdTe cells having established a decisive market presence, and organic photovoltaics holding out the prospect of economical large-scale power production. Contents: The Past and Present (M D Archer); Limits to Photovol

Ions in solution basic principles of chemical interactions

CERN Document Server

Burgess, J

1999-01-01

This outline of the principles and chemical interactions in inorganic solution chemistry delivers a course module in an area of considerable complexity. Problems with solutions and tutorial hints to test comprehension have been added as a feature to check readers' understanding and assist self-study. Exercises and projects are also provided to help readers deepen and extend their knowledge and understanding. Inorganic solution chemistry is treated thoroughly Emphasis is placed upon NMR, UV-VIS, IR Raman spectroscopy, X-ray diffraction, and such topics as acid-base behaviour, stability constants and kinetics.

International Photovoltaic Program Plan

Energy Technology Data Exchange (ETDEWEB)

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-12-01

The International Photovoltaics Program Plan is in direct response to the Solar Photovoltaic Energy Research, Development, and Demonstration Act of 1978 (PL 95-590). As stated in the Act, the primary objective of the plan is to accelerate the widespread use of photovoltaic systems in international markets. Benefits which could result from increased international sales by US companies include: stabilization and expansion of the US photovoltaic industry, preparing the industry for supplying future domestic needs; contribution to the economic and social advancement of developing countries; reduced world demand for oil; and improvements in the US balance of trade. The plan outlines programs for photovoltaic demonstrations, systems developments, supplier assistance, information dissemination/purchaser assistance, and an informaion clearinghouse. Each program element includes tactical objectives and summaries of approaches. A program management office will be established to coordinate and manage the program plan. Although the US Department of Energy (DOE) had the lead responsibility for preparing and implementing the plan, numerous federal organizations and agencies (US Departments of Commerce, Justice, State, Treasury; Agency for International Development; ACTION; Export/Import Bank; Federal Trade Commission; Small Business Administration) were involved in the plan's preparation and implementation.

Principles of Burn Pain Management.

Science.gov (United States)

James, Dominika Lipowska; Jowza, Maryam

2017-10-01

This article describes pathophysiology of burn injury-related pain and the basic principles of burn pain management. The focus is on concepts of perioperative and periprocedural pain management with extensive discussion of opioid-based analgesia, including patient-controlled analgesia, challenges of effective opioid therapy in opioid-tolerant patients, and opioid-induced hyperalgesia. The principles of multimodal pain management are discussed, including the importance of psychological counseling, perioperative interventional pain procedures, and alternative pain management options. A brief synopsis of the principles of outpatient pain management is provided. Copyright © 2017 Elsevier Inc. All rights reserved.

Materials for Photovoltaic Applications

Science.gov (United States)

Dimova-Malinovska, Doriana

Energy priorities are changing nowadays. As mankind will probably have to face energy crisis, factors such as energy independence, energy security, stability of energy supply and the variety of energy sources become much more vital these days. Photovoltaics is exceptional compared to other renewable sources of energy due to its wide opportunity to gain energetic and environmental benefits. An overview of the present state of knowledge of the materials aspects of photovoltaic cells will be given, and new semiconductor materials, including nanomaterials, with potential for application in photovoltaic devices will be identified.

Application of Basic Principles for Intervention

International Nuclear Information System (INIS)

Skanata, D.; Sinka, D.; Jurkovic, I.-A.

1998-01-01

The paper deals with the basic terms which are within scope of activities of the expert group for risk analysis and assessment of potential consequences of a nuclear accident. The expert group is a part of the Technical Support Center which is going to be established within a new croatian national emergency response plan as the Lead Technical Agency in case of a nuclear emergency. Terms such as protective measures (urgent and long-term), intervention levels (generic and operational), projected and avertable doses are considered. Potential accident in the Krsko NPP, as an example for implementation of mentioned terms, is analyzed and a rapid approach for assessment in pretective measures which would be taken is applied. It is emphasized that rapid methods are characterized by a high degree of uncertainty. It is concluded that the time factor remains the most critical one in the entire accident response process. In order to optimize the time necessary for decision making, implementation and surveillance of protective measures, a set of requirements are pointed out. (author)

Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. International cooperation projects (Collection of information on Task 9 in IEA photovoltaic power generation program); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Kokusai kyoryoku jigyo (IEA taiyoko hatsuden program task IX ni kansuru joho shushu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports activities performed by the Task 9 in the execution treaty of the IEA photovoltaic power generation system program. The Task 9 calls for the 'proliferation of photovoltaic power generation technologies under coordination with developing countries{sup .} It is intended to compile the recommendation guides, hold workshops in the model developing countries, and coordinate with assisting organizations on technological and economical issues that may occur when introducing photovoltaic power generation systems into developing countries. The current fiscal year is the first year of the five-year plan, whereas, with structuring the basic plan placed in the center, such activities were carried out as verification of the 12 member countries and two organizations, establishment of the basic programs for the work plan, selection of work divisions, the sharing thereof, and the subjected developing countries, and the way the coordination should be with the related tasks and the assisting organizations. Two expertise conferences were held in Holland and America, and three working group meetings in Japan to have discussed the activity targets in the first fiscal year. (NEDO)

Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. International cooperation projects (Collection of information on Task 9 in IEA photovoltaic power generation program); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Kokusai kyoryoku jigyo (IEA taiyoko hatsuden program task IX ni kansuru joho shushu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports activities performed by the Task 9 in the execution treaty of the IEA photovoltaic power generation system program. The Task 9 calls for the 'proliferation of photovoltaic power generation technologies under coordination with developing countries{sup .} It is intended to compile the recommendation guides, hold workshops in the model developing countries, and coordinate with assisting organizations on technological and economical issues that may occur when introducing photovoltaic power generation systems into developing countries. The current fiscal year is the first year of the five-year plan, whereas, with structuring the basic plan placed in the center, such activities were carried out as verification of the 12 member countries and two organizations, establishment of the basic programs for the work plan, selection of work divisions, the sharing thereof, and the subjected developing countries, and the way the coordination should be with the related tasks and the assisting organizations. Two expertise conferences were held in Holland and America, and three working group meetings in Japan to have discussed the activity targets in the first fiscal year. (NEDO)

Parametric study of laser photovoltaic energy converters

Science.gov (United States)

Walker, G. H.; Heinbockel, J. H.

1987-01-01

Photovoltaic converters are of interest for converting laser power to electrical power in a space-based laser power system. This paper describes a model for photovoltaic laser converters and the application of this model to a neodymium laser silicon photovoltaic converter system. A parametric study which defines the sensitivity of the photovoltaic parameters is described. An optimized silicon photovoltaic converter has an efficiency greater than 50 percent for 1000 W/sq cm of neodymium laser radiation.

Photovoltaic research and development

CSIR Research Space (South Africa)

Cummings, F

2009-09-01

Full Text Available Photovoltaic (PV) is the direct conversion of sunlight into electrical energy through a solar cell. This presentation consists of an introduction to photovoltaics, the South African PV research roadmap, a look at the CSIR PV research and development...

A Three-Dimensional Radiation Transfer Model to Evaluate Performance of Compound Parabolic Concentrator-Based Photovoltaic Systems

Directory of Open Access Journals (Sweden)

Jingjing Tang

2018-04-01

Full Text Available In the past, two-dimensional radiation transfer models (2-D models were widely used to investigate the optical performance of linear compound parabolic concentrators (CPCs, in which the radiation transfer on the cross-section of CPC troughs is considered. However, the photovoltaic efficiency of solar cells depends on the real incidence angle instead of the projection incidence angle, thus 2-D models can’t reasonably evaluate the photovoltaic performance of CPC-based photovoltaic systems (CPVs. In this work, three-dimensional radiation transfer (3-D model within CPC-θa/θe, the CPC with a maximum exit angle θe for radiation within its acceptance angle (θa, is investigated by means of vector algebra, solar geometry and imaging principle of plane mirror, and effects of geometry of CPV-θa/θe on its annual electricity generation are studied. Analysis shows that, as compared to similar photovoltaic (PV panels, the use of CPCs makes the incident angle of solar rays on solar cells increase thus lowers the photovoltaic conversion efficiency of solar cells. Calculations show that, 2-D models can reasonably predict the optical performance of CPVs, but such models always overestimate the photovoltaic performance of CPVs, and even can’t predict the variation trend of annual power output of CPV-θa/θe with θe. Results show that, for full CPV-θa/θe with a given θa, the annual power output increases with θe first and then comes to a halt as θe > 83°, whereas for truncated CPV-θa/θe with a given geometric concentration (Ct, the annual power output decreases with θe.

Electrolytic Hydrogen obtaining by a photovoltaic source

International Nuclear Information System (INIS)

Pasculete, E.; Condrea, F.; Stanoiu, L.

2005-01-01

At present, the developed countries allocate large funds for the financing of some global programs for fundamental and applicative research for development of hydrogen non-conventional production technologies. One of these technologies is the photo-assisted electrolysis. This technology is adopted in the research, which results are presented in this paper. The experimental model includes as basic equipment 100 W photovoltaic source, electrolysis battery press filter type, control unit of the electric energy discharged, accumulator, hydrogen storage unit. Five types of material have been tested for the electrolysis cell diaphragm: asbestos; Netrom- unwoven material from fibers of polypropylene; ion changing composite membrane - polysulfone support with an active layer of sulfonated poly-sulfone (PSS/PSJ) and poly-sulfone support with an active layer of sulfonated poly-eter cetone (SPEEK/PSf); ion-exchange membrane made from sulfonated poly-eter cetone (SPEEK). The graphics and results from the test system are presented. The analysis of the experimental results lead to the establishment of the optimal configuration of battery and of the operational conditions of the assembly. The experimental results give the opportunity to obtain electrolytic hydrogen with a photovoltaic source, in an efficient system, and promote the Romanian research at a level of a demonstrative installation

Case Study - Monitoring the Photovoltaic Panels

OpenAIRE

PACURAR Ana Talida; TOADER Dumitru; PACURAR Cristian

2014-01-01

The photovoltaic cell represents one of the most dynamic and attractive way to converts renewable energy sources in electricity production. That means to convert solar energy into electricity. In this paper is presented a analogy between two types of photovoltaic panels installed, with educational role for students. Also the objective of this paper is to estimate the performance of photovoltaic panels and to provide the best solution for industry. These two types of photovoltaic panels wer...

XAFS Spectroscopy : Fundamental Principles and Data Analysis

NARCIS (Netherlands)

Koningsberger, D.C.; Mojet, B.L.; Dorssen, G.E. van; Ramaker, D.E.

2000-01-01

The physical principles of XAFS spectroscopy are given at a sufficiently basic level to enable scientists working in the field of catalysis to critically evaluate articles dealing with XAFS studies on catalytic materials. The described data-analysis methods provide the basic tools for studying the

Fiscal 2000 achievement report. International demonstrative development of photovoltaic power generation system (Demonstrative study on grid-connected photovoltaic power generation system in Thailand); 2000 nendo seika hokokusho. Taiyoko hatsuden system kokusai kyodo jissho kaihatsu - Taiyoko hatsuden keitou renkei system jissho kenkyu (Tai)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

A demonstrative study was conducted in Thailand for grasping the effect on small electricity grids when several photovoltaic power generation systems, including AC modules, are connected to the grid. In fiscal 2000, surveys and studies were conducted about the data of the local power system, where to install the demonstrative system, and how to install the same, which were necessary for working out a basic design for Libong Island newly designated as the site for the demonstrative system. It was then concluded that the demonstrative system be a grid-connected 100 kW-level photovoltaic system comprising one main photovoltaic power station (85 kW), photovoltaic power systems for school buildings (3-6 kW, three schools), and AC modules (110 W, 10 locations). The manufacture of solar cell modules, grid-connected power conditioners, and measuring devices were completed. Civil engineering work and construction were under way on the site, including the construction of a management building, installation of concrete bases for solar cell arrays, construction of fences surrounding the site, and so forth. (NEDO)

Development and Testing of the Glenn Research Center Visitor's Center Grid-Tied Photovoltaic Power System

Science.gov (United States)

Eichenberg, Dennis J.

2009-01-01

The NASA Glenn Research Center (GRC) has developed, installed, and tested a 12 kW DC grid-tied photovoltaic (PV) power system at the GRC Visitor s Center. This system utilizes a unique ballast type roof mount for installing the photovoltaic panels on the roof of the Visitor s Center with no alterations or penetrations to the roof. The PV system has generated in excess of 15000 kWh since operation commenced in August 2008. The PV system is providing power to the GRC grid for use by all. Operation of the GRC Visitor s Center PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provides valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the GRC Visitor s Center PV system, additional PV power system expansion at GRC is under consideration. The GRC Visitor s Center grid-tied PV power system was successfully designed and developed which served to validate the basic principles

Variational principles in physics

CERN Document Server

Basdevant, Jean-Louis

2007-01-01

Optimization under constraints is an essential part of everyday life. Indeed, we routinely solve problems by striking a balance between contradictory interests, individual desires and material contingencies. This notion of equilibrium was dear to thinkers of the enlightenment, as illustrated by Montesquieu’s famous formulation: "In all magistracies, the greatness of the power must be compensated by the brevity of the duration." Astonishingly, natural laws are guided by a similar principle. Variational principles have proven to be surprisingly fertile. For example, Fermat used variational methods to demonstrate that light follows the fastest route from one point to another, an idea which came to be known as Fermat’s principle, a cornerstone of geometrical optics. Variational Principles in Physics explains variational principles and charts their use throughout modern physics. The heart of the book is devoted to the analytical mechanics of Lagrange and Hamilton, the basic tools of any physicist. Prof. Basdev...

Grounds of two positions photovoltaic panels

OpenAIRE

Castán Fortuño, Fernando

2008-01-01

The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

Natural Flow Air Cooled Photovoltaics

Science.gov (United States)

Tanagnostopoulos, Y.; Themelis, P.

2010-01-01

Our experimental study aims to investigate the improvement in the electrical performance of a photovoltaic installation on buildings through cooling of the photovoltaic panels with natural air flow. Our experimental study aims to investigate the improvement in the electrical performance of a photovoltaic installation on buildings through cooling of the photovoltaic panels with natural air flow. We performed experiments using a prototype based on three silicon photovoltaic modules placed in series to simulate a typical sloping building roof with photovoltaic installation. In this system the air flows through a channel on the rear side of PV panels. The potential for increasing the heat exchange from the photovoltaic panel to the circulating air by the addition of a thin metal sheet (TMS) in the middle of air channel or metal fins (FIN) along the air duct was examined. The operation of the device was studied with the air duct closed tightly to avoid air circulation (CLOSED) and the air duct open (REF), with the thin metal sheet (TMS) and with metal fins (FIN). In each case the experiments were performed under sunlight and the operating parameters of the experimental device determining the electrical and thermal performance of the system were observed and recorded during a whole day and for several days. We collected the data and form PV panels from the comparative diagrams of the experimental results regarding the temperature of solar cells, the electrical efficiency of the installation, the temperature of the back wall of the air duct and the temperature difference in the entrance and exit of the air duct. The comparative results from the measurements determine the improvement in electrical performance of the photovoltaic cells because of the reduction of their temperature, which is achieved by the naturally circulating air.

Applied photovoltaics

CERN Document Server

Wenham, Stuart R; Watt, Muriel E; Corkish, Richard; Sproul, Alistair

2013-01-01

The new edition of this thoroughly considered textbook provides a reliable, accessible and comprehensive guide for students of photovoltaic applications and renewable energy engineering. Written by a group of award-winning authors it is brimming with information and is carefully designed to meet the needs of its readers. Along with exercises and references at the end of each chapter, it features a set of detailed technical appendices that provide essential equations, data sources and standards. The new edition has been fully updated with the latest information on photovoltaic cells,

Special issue photovoltaic

International Nuclear Information System (INIS)

2004-01-01

In this letter of the INES (french National Institute of the Solar Energy), a special interest is given to photovoltaic realizations in Europe. Many information are provided on different topics: the China future fifth world producer of cells in 2005, batteries and hydrogen to storage the solar energy and a technical sheet on a photovoltaic autonomous site installation for electric power production. (A.L.B.)

Exergy analysis of photovoltaic solar collector

International Nuclear Information System (INIS)

Sopian, K.; Othman, M.Y.Hj.

1998-01-01

The exergy analysis (availability or second law analysis) is applied to the photovoltaic thermal solar collector. Photovoltaic thermal collector is a special type of solar collector where electricity and heat are produced simultaneously. The electricity produced from the photovoltaic thermal collector is all converted into useful work. The available quantity of the heat collected can readily be determined by taking into account both the quantity (heat quantity) and quality ( a function of temperature) of the thermal energy. Therefore, using the concept of exergy allows heat produced from the thermal collector and the electricity generated from the photovoltaic cells to be compared or to be evaluated on the basis of a common measure such as the effectiveness on solar energy collection or the total amount of available energy. In this paper, the effectiveness of solar energy collection is called combined photovoltaic thermal exergy efficiency. An experimental setup of a double pas photovoltaic thermal solar collector has been deigned, fabricated and tested. (author)

Formulation of basic principles for innovative combustion and work processes; Projekt Erarbeitung von Grundlagen fuer innovative Brennverfahren und motorische Arbeitsprozesse

Energy Technology Data Exchange (ETDEWEB)

Barroso, G.; Escher, A.; Boulouchos, K. [Eidgenoessische Technische Hochschule (ETH), Labor fuer Aerothermochemie und Verbrennungssysteme IET, ETH-Zentrum, Zuerich (Switzerland)

2004-07-01

This yearly report for 2004 presents a review of work being done on behalf of the Swiss Federal Office of Energy (SFOE) at the Laboratory for Aero-thermochemistry and Combustion Systems at the Federal Institute of Technology ETH in Zurich, Switzerland, on the development of basic principles for innovative combustion and work processes. A successfully-used approach involving reaction-path analysis, heat-release analysis and the optimisation of bio-inspired algorithms is discussed. Experimental investigations made using the high-pressure, high-temperature cell at the ETH are described and initial results are discussed. The commissioning of a one-stroke Rapid Compression Machine EHT and the results of initial experiments are presented.

High-Efficiency Photovoltaic System Using Partially-Connected DC-DC Converter

Science.gov (United States)

Uno, Masatoshi; Kukita, Akio; Tanaka, Koji

Power conversion electronics for photovoltaic (PV) systems are desired to operate as efficiently as possible to exploit the power generated by PV modules. This paper proposes a novel PV system in which a dc-dc converter is partially connected to series-connected PV modules. The proposed system achieves high power-conversion efficiency by reducing the passing power and input/output voltages of the converter. The theoretical operating principle was experimentally validated. Resultant efficiency performances of the proposed and conventional systems demonstrated that the proposed system was more efficient in terms of power conversion though the identical converter was used for the both systems.

Energetic and economic evaluation of solar thermal and photovoltaic cooling system in Cuban hotel

International Nuclear Information System (INIS)

Díaz Torres, Yamile; Valdivia Nodal, Yarelis; Castellanos Molina, Luis Miguel; Torres del Toro, Migdalia; Monteagudo Llanes, José

2015-01-01

The present paper discusses the energetic and economic feasibility of using two configurations of solar cooling in a Cuban Hotel. The air conditioning hybrid system schemes are: conventional system (Chiller) interconnected in parallel with a solar- powered absorption cooling system (SACS); and a photovoltaic cooling system (PCS). There were analyzed by methodologies and thermodynamic principles governing these technologies. The results show that their uses are alternatives for reducing energy consumption and environmental impact. (full text)

Pyroelectric photovoltaic spatial solitons in unbiased photorefractive crystals

International Nuclear Information System (INIS)

Jiang, Qichang; Su, Yanli; Ji, Xuanmang

2012-01-01

A new type of spatial solitons i.e. pyroelectric photovoltaic spatial solitons based on the combination of pyroelectric and photovoltaic effect is predicted theoretically. It shows that bright, dark and grey spatial solitons can exist in unbiased photovoltaic photorefractive crystals with appreciable pyroelectric effect. Especially, the bright soliton can form in self-defocusing photovoltaic crystals if it gives larger self-focusing pyroelectric effect. -- Highlights: ► A new type of spatial soliton i.e. pyroelectric photovoltaic spatial soliton is predicted. ► The bright, dark and grey pyroelectric photovoltaic spatial soliton can form. ► The bright soliton can also exist in self-defocusing photovoltaic crystals.

International photovoltaic program. Volume 2: Appendices

Science.gov (United States)

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-01-01

The results of analyses conducted in preparation of an international photovoltaic marketing plan are summarized. Included are compilations of relevant statutes and existing Federal programs; strategies designed to expand the use of photovoltaics abroad; information on the domestic photovoltaic plan and its impact on the proposed international plan; perspectives on foreign competition; industry views on the international photovoltaic market and ideas about the how US government actions could affect this market;international financing issues; and information on issues affecting foreign policy and developing countries.

Solar photovoltaic reflective trough collection structure

Science.gov (United States)

Anderson, Benjamin J.; Sweatt, William C.; Okandan, Murat; Nielson, Gregory N.

2015-11-19

A photovoltaic (PV) solar concentration structure having at least two troughs encapsulated in a rectangular parallelepiped optical plastic structure, with the troughs filled with an optical plastic material, the troughs each having a reflective internal surface and approximately parabolic geometry, and the troughs each including photovoltaic cells situated so that light impinging on the optical plastic material will be concentrated onto the photovoltaic cells. Multiple structures can be connected to provide a solar photovoltaic collection system that provides portable, efficient, low-cost electrical power.

Characterization of Photovoltaic Generators

Science.gov (United States)

Boitier, V.; Cressault, Y.

2011-01-01

This paper discusses photovoltaic panel systems and reviews their electrical properties and use in several industrial fields. We explain how different photovoltaic panels may be characterized by undergraduate students at university using simple methods to retrieve their electrical properties (power, current and voltage) and compare these values…

Using General Semantics Principles in the Basic News Reporting Classroom.

Science.gov (United States)

Russell, Charles G.; Many, Paul

1993-01-01

Shows how certain principles of the study of semantics might be employed in the journalism curriculum as a means of enhancing student reporters' understanding that their perceptions are limited and subject to distortion. Provides a model for explaining these limitations. (HB)

Photovoltaic solar energy; Photovoltaische Solarenergie

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

Within the 27th symposium of the Ostbayerische Technologie-Transfer-Institut e.V. (Regensburg, Federal Republic of Germany) from 29th February to 02th March, 2012, at Banz monastery near Bad Staffelstein (Federal Republic of Germany), the following lectures were held: (1) EEG 12: State of the art and impacts (K. Freier); (2) Promising markets - PV market potentials Europe (M. Lohr); (3) Expansion requires restructuring - Research promotion for renewable energy and renewable energy supply systems (K. Deller); (4) Fields of application and potentials of photovoltaics in Germany without an enhanced EEG compensation (V. Quaschning); (5) ''Smart Solar Grid'' - Results of the analysis and solar roof potential of the first test area of the public utility Ulm (H. Ruf); (6) Power limitation at PV plants - Adjustment of modelling methods and comparison of different location (J. von Appen); (7) Exploitations to the power limitation till to 70 % of the module capacity (B. Giesler); (8) Actual procedural results of the clearing house EEG to photovoltaics and modifications at PV by means of the EEG 2012 (M. Winkler); (9) Grid integration of PV plants from a legal point of view (M. von Oppen); (10) EEG 2012 - Abetment or brake? PV and other renewable energies in comparison (M. Reichmuth); (11) On the precision of radiation and photovoltaics component models (J. Schumacher); (12) Impact of global radiation data with different properties on the performance ratio and prognosticated energy efficiency of photovoltaic power plants (M. Egler); (13) Quantification of superelevations of irradiation in high-resolution DWD datasets for different locations in Germany (M. Zehner); (14) Prognosis of the regional PV performance with measuring data of PV plant and satellite pictures (Y.-M. Saint-Drenan); (15) Photovoltaics and wind power: perfectly complementing power technologies using Central Germany as an example (C. Breyer); (16) Which and how much storages are necessary

The players of the photovoltaic sector in France

International Nuclear Information System (INIS)

Houot, G.

2012-01-01

This document reviews 338 players in the French photovoltaic industry. Each player can be the owner of a photovoltaic power plant, or its operator, or the manufacturer of photovoltaic systems, or the manufacturer of components involved in photovoltaic systems, or the equipment wholesaler, or the designer of photovoltaic projects, or the photovoltaic system installer. For each player some pieces of information are gathered: a brief history of the enterprise, the enterprise activity, its staff, its turnover, its main achievements and its prospects. (A.C.)

Nanostructured Photovoltaics for Space Power

Data.gov (United States)

National Aeronautics and Space Administration — The NASA NSTRF proposal entitled Nanostructured Photovoltaics for Space Power is targeted towards research to improve the current state of the art photovoltaic...

Print-Assisted Photovoltaic Assembly (PAPA)

Data.gov (United States)

National Aeronautics and Space Administration — This proposal describes the development of an innovative method for the fabrication of thin-film photovoltaic panels. Print-Assisted Photovoltaic Assembly, or PAPA,...

Dynamic Control Based Photovoltaic Illuminating System

Directory of Open Access Journals (Sweden)

Zhang Chengkai

2016-01-01

Full Text Available Smart LED illumination system can use the power from whether the photovoltaic cell or the power grid automatically based on the SOC (State Of Charge of the photovoltaic cell. This paper proposes a feedback control of the photovoltaic cells and a dynamic control strategy for the Energy system. The dynamic control strategy is used to determine the switching state of the photovoltaic cell based on the illumination load in the past one hour and the battery capacity. These controls are manifested by experimental prototype that the control scheme is correct and effective.

Photovoltaic venture analysis. Final report. Volume III. Appendices

Energy Technology Data Exchange (ETDEWEB)

Costello, D.; Posner, D.; Schiffel, D.; Doane, J.; Bishop, C.

1978-07-01

This appendix contains a brief summary of a detailed description of alternative future energy scenarios which provide an overall backdrop for the photovoltaic venture analysis. Also included is a summary of a photovoltaic market/demand workshop, a summary of a photovoltaic supply workshop which used cross-impact analysis, and a report on photovoltaic array and system prices in 1982 and 1986. The results of a sectorial demand analysis for photovoltaic power systems used in the residential sector (single family homes), the service, commercial, and institutional sector (schools), and in the central power sector are presented. An analysis of photovoltaics in the electric utility market is given, and a report on the industrialization of photovoltaic systems is included. A DOE information memorandum regarding ''A Strategy for a Multi-Year Procurement Initiative on Photovoltaics (ACTS No. ET-002)'' is also included. (WHK)

Photovoltaic generating systems in rural schools in Neuquen Province, Argentina

Energy Technology Data Exchange (ETDEWEB)

Lawand, T.A.; Campbell, J. [Brace Research Institute, Quebec (Canada)

1997-12-01

During the period 1994-95, solar photovoltaic systems were installed at a number of schools in Neuquen Province, Argentina, by the Provincial electric utility, Ente Provincial de Energia del Neuquen. This was undertaken with funds provided by the Inter-American Development Bank. In all, there are 12 schools that have had photovoltaic generating systems installed. These generating systems are designed to provide electricity for the basic needs at the schools: primarily for lighting, and to operate small electrical appliances such as communication radios, televisions, VCR`s, AM/FM and short-wave radios. They do not provide enough energy to operate large consumption appliances such as washing machines, microwaves, refrigerators, power tools, etc. The program of provision of PV systems was supplemented with training on simple systems for cooking food or drying fruit, etc. These techniques are primarily intended for demonstration at the schools thus serving an educational role with the hope that they will be transmitted in time to the families of the students where the need is manifested the most.

Photovoltaic technologies

International Nuclear Information System (INIS)

Bagnall, Darren M.; Boreland, Matt

2008-01-01

Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power into the mainstream. Currently, photovoltaic production is 90% first-generation and is based on silicon wafers. These devices are reliable and durable, but half of the cost is the silicon wafer and efficiencies are limited to around 20%. A second generation of solar cells would use cheap semiconductor thin films deposited on low-cost substrates to produce devices of slightly lower efficiency. A number of thin-film device technologies account for around 5-6% of the current market. As second-generation technology reduces the cost of active material, the substrate will eventually be the cost limit and higher efficiency will be needed to maintain the cost-reduction trend. Third-generation devices will use new technologies to produce high-efficiency devices. Advances in nanotechnology, photonics, optical metamaterials, plasmonics and semiconducting polymer sciences offer the prospect of cost-competitive photovoltaics. It is reasonable to expect that cost reductions, a move to second-generation technologies and the implementation of new technologies and third-generation concepts can lead to fully cost-competitive solar energy in 10-15 years. (author)

Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This test method covers a procedure for the determination of a spectral mismatch parameter used in performance testing of photovoltaic devices. 1.2 The spectral mismatch parameter is a measure of the error, introduced in the testing of a photovoltaic device, caused by mismatch between the spectral responses of the photovoltaic device and the photovoltaic reference cell, as well as mismatch between the test light source and the reference spectral irradiance distribution to which the photovoltaic reference cell was calibrated. Examples of reference spectral irradiance distributions are Tables E490 or G173. 1.3 The spectral mismatch parameter can be used to correct photovoltaic performance data for spectral mismatch error. 1.4 This test method is intended for use with linear photovoltaic devices. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, a...

Basic research projects

International Nuclear Information System (INIS)

1979-04-01

The research programs under the cognizance of the Office of Energy Research (OER) are directed toward discovery of natural laws and new knowledge, and to improved understanding of the physical and biological sciences as related to the development, use, and control of energy. The ultimate goal is to develop a scientific underlay for the overall DOE effort and the fundamental principles of natural phenomena so that these phenomena may be understood, and new principles, formulated. The DOE-OER outlay activities include three major programs: High Energy Physics, Nuclear Physics, and Basic Energy Sciences. Taken together, these programs represent some 30 percent of the Nation's Federal support of basic research in the energy sciences. The research activities of OER involve more than 6,000 scientists and engineers working in some 17 major Federal Research Centers and at more than 135 different universities and industrial firms throughout the United States. Contract holders in the areas of high-energy physics, nuclear physics, materials sciences, nuclear science, chemical sciences, engineering, mathematics geosciences, advanced energy projects, and biological energy research are listed. Funding trends for recent years are outlined

A kick to the photovoltaic industry

International Nuclear Information System (INIS)

Deye, M.; Remoue, A.

2010-01-01

In order to stop the speculation fever and to stabilize the photovoltaic trade, the French government has decided to lower some of the warranted electricity repurchase tariffs related to photovoltaic power generation. This announcement should have important impacts on the photovoltaic industry which will redirect its means and products towards the residential sector. (J.S.)

Process Development for Nanostructured Photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Elam, Jeffrey W.

2015-01-01

Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

US Photovoltaic Patents, 1988--1990

Energy Technology Data Exchange (ETDEWEB)

1991-12-01

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class Batteries, Thermoelectric and Photoelectric'' and the subclasses Photoelectric,'' Testing,'' and Applications.'' The search also located patents that contained the words photovoltaic(s)'' or solar cell(s)'' and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

Survey of photovoltaic systems

Energy Technology Data Exchange (ETDEWEB)

1979-08-01

In developing this survey of photovoltaic systems, the University of Alabama in Huntsville assembled a task team to perform an extensive telephone survey of all known photovoltaic manufacturers. Three US companies accounted for 77% of the total domestic sales in 1978. They are Solarex Corporation, Solar Power Croporation, and ARCO Solar, Inc. This survey of solar photovoltaic (P/V) manufacturers and suppliers consists of three parts: a catalog of suppliers arranged alphabetically, data sheets on specific products, and typical operating, installation, or maintenance instructions and procedures. This report does not recommend or endorse any company product or information presented within as the results of this survey.

Photovoltaic barometer; Barometre photovoltaique

Energy Technology Data Exchange (ETDEWEB)

Anon.

2011-04-15

The photovoltaic sector is continuing on track, just as the extent of solar energy's electricity-generating potential is dawning on the public mind. The annual global installation figure was up more than twofold in 2010 (rising from just short of 7000 MWp in 2009). It leapt to over 16000 MWp, bringing worldwide installed photovoltaic capacity close to 38000 MWp. The photovoltaic power generated in the European Union at the end of 2010 reached 22.5 TWh which means an additional capacity of 13023 MWp during 2010. Concerning the cumulated installed capacity, Germany and Spain rank first and second in the European Union with respectively 17370 MWp and 3808 MWp

Radioisotope-powered photovoltaic generator

International Nuclear Information System (INIS)

McKlveen, J.W.; Uselman, J.

1979-01-01

Disposing of radioactive wastes from nuclear power plants has become one of the most important issues facing the nuclear industry. In a new concept, called a radioisotope photovoltaic generator, a portion of this waste would be used in conjunction with a scintillation material to produce light, with subsequent conversion into electricity via photovoltaic cells. Three types of scintillators and two types of silicon cells were tested in six combinations using 32 P as the radioisotope. The highest system efficiency, determined to be 0.5% when the light intensity was normalized to 100 mW/cm 2 , was obtained using a CsI crystal scintillator and a Helios photovoltaic cell

Photovoltaic Subcontract Program

Energy Technology Data Exchange (ETDEWEB)

Surek, Thomas; Catalano, Anthony

1993-03-01

This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT) project, PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.

The Pauli Exclusion Principle

Indian Academy of Sciences (India)

his exclusion principle, the quantum theory was a mess. Moreover, it could ... This is a function of all the coordinates and 'internal variables' such as spin, of all the ... must remain basically the same (ie change by a phase factor at most) if we ...

The Structuring Principle: Political Socialization and Belief Systems

Science.gov (United States)

Searing, Donald D.; And Others

1973-01-01

Assesses the significance of data on childhood political learning to political theory by testing the structuring principle,'' considered one of the central assumptions of political socialization research. This principle asserts that basic orientations acquired during childhood structure the later learning of specific issue beliefs.'' The…

A MARKETING STRATEGY ON PHOTOVOLTAIC MARKET

Directory of Open Access Journals (Sweden)

Coita Dorin Cristian

2008-05-01

Full Text Available Photovoltaic is an increasingly important energy technology. Deriving energy from the sun offers numerous environmental benefits. It is an extremely clean energy source, and few other power-generating technologies have as little environmental impact as photovoltaic. In this article we explored some dimensions of photovoltaic market and suggested a marketing strategy for solar panels manufacturers

Novel Materials for Photovoltaic Technologies: Preprint

International Nuclear Information System (INIS)

Alivisatos, P.; Carter, S.; Ginley, D.; Nozik, A.; Meyer, G.; Rosenthal, S.

1999-01-01

While existing photovoltaic technologies continue to advance, there are still many exciting opportunities in the area of novel materials. These opportunities arise because there is a substantial need for reducing the costs associated with the preparation and processing of photovoltaics, and because the theoretically possible photovoltaic efficiencies have yet to be achieved in practical devices. Thus it remains reasonable to continue photovoltaic research activity aimed at entirely new approaches to processing and at entirely new materials as the active media. This group identified three areas for further consideration: (a) Nano/molecular composites and hierarchical structures; (b) Organic semiconductors; and (c) Hot carrier devices

Principles of macro-methodic of junior female gymnasts’ training to sport exercises for gymnastic all round competitions at specialized basic stage

Directory of Open Access Journals (Sweden)

V.A. Potop

2015-08-01

Full Text Available Purpose: working out of principles of junior female gymnasts’ macro-methodic training to sport exercises for all round competitions at stage of specialized basic training. Material: in the research 19 girl-gymnasts from reserve of combined team of Romania participated. Measurements and assessment of technical fitness at training sessions and in conditions of competitions were conducted at 120 training sessions (10 sessions a week. Results: we worked out and realized experimentally and in training sessions principles of macro-methodic training to gymnastic exercises. Macro-methodic of training is presented in structure of long-term programs of training for all round competitions. Macro-methodic is presented as combination of elements of motor, technical, didactic and technological structures of sport exercises (in the present article it was described on material of vaults of Yurchenko’s type. Conclusions: macro-methodic permits to state optimal algorithm of mastering of theoretical and practical materials at training sessions. Besides, it permits to demonstrate steady growth of sport results at competitions. With it individual-age features of junior female gymnasts, tendencies and specialists’ requirements are considered.

Electrical principles 3 checkbook

CERN Document Server

Bird, J O

2013-01-01

Electrical Principles 3 Checkbook aims to introduce students to the basic electrical principles needed by technicians in electrical engineering, electronics, and telecommunications.The book first tackles circuit theorems, single-phase series A.C. circuits, and single-phase parallel A.C. circuits. Discussions focus on worked problems on parallel A.C. circuits, worked problems on series A.C. circuits, main points concerned with D.C. circuit analysis, worked problems on circuit theorems, and further problems on circuit theorems. The manuscript then examines three-phase systems and D.C. transients

Combination solar photovoltaic heat engine energy converter

Science.gov (United States)

Chubb, Donald L.

1987-01-01

A combination solar photovoltaic heat engine converter is proposed. Such a system is suitable for either terrestrial or space power applications. The combination system has a higher efficiency than either the photovoltaic array or the heat engine alone can attain. Advantages in concentrator and radiator area and receiver mass of the photovoltaic heat engine system over a heat-engine-only system are estimated. A mass and area comparison between the proposed space station organic Rankine power system and a combination PV-heat engine system is made. The critical problem for the proposed converter is the necessity for high temperature photovoltaic array operation. Estimates of the required photovoltaic temperature are presented.

A comparative study on three types of solar utilization technologies for buildings: Photovoltaic, solar thermal and hybrid photovoltaic/thermal systems

International Nuclear Information System (INIS)

Huide, Fu; Xuxin, Zhao; Lei, Ma; Tao, Zhang; Qixing, Wu; Hongyuan, Sun

2017-01-01

Highlights: • Models of Solar thermal, Photovoltaic and Photovoltaic/thermal systems are developed. • Experiments are performed to validate the simulation results. • Annual performances of the three solar systems used in china are predicted. • Energy comparison between the three solar systems is analyzed. - Abstract: Buildings need energy including heat and electricity, and both of them can be provided by the solar systems. Solar thermal and photovoltaic systems absorb the solar energy and can supply the heat and electricity for buildings, respectively. However, for the urban residential buildings, the limited available area makes installation of the solar thermal collectors and photovoltaic modules together impossible. A hybrid photovoltaic/thermal system can simultaneously generate heat and electricity, which is deemed to be quite suitable for the urban residential buildings application. And yet, for a rural house of China, the available area for installation of the solar collectors is large but daily domestic hot water demand of a rural family is generally not exceeded 300 L. If only the hybrid photovoltaic/thermal collectors are installed on the whole available area, this will lead to an overproduction of the thermal energy, especially in summer. Moreover, buildings requiring for the heat and electricity are different in different regions and different seasons. In this paper, simulation models of the solar thermal, photovoltaic and hybrid photovoltaic/thermal systems are presented, and experiments are also performed to validate the simulation results. Using the validated models, performances of the three solar systems for residential applications were predicted. And energy comparison between the three solar systems used in Hongkong, Lhasa, Shanghai and Beijing of China, respectively, were also studied. Results show that, for the urban residential building with limited available installation space, a hybrid photovoltaic/thermal system may have the

Energetics and dynamics in organic–inorganic halide perovskite photovoltaics and light emitters

International Nuclear Information System (INIS)

Sum, Tze Chien; Chen, Shi; Xing, Guichuan; Liu, Xinfeng; Wu, Bo

2015-01-01

The rapid transcendence of organic–inorganic metal halide perovskite solar cells to above the 20% efficiency mark has captivated the broad photovoltaic community. As the efficiency race continues unabated, it is essential that fundamental studies keep pace with these developments. Further gains in device efficiencies are expected to be increasingly arduous and harder to come by. The key to driving the perovskite solar cell efficiencies towards their Shockley–Queisser limit is through a clear understanding of the interfacial energetics and dynamics between perovskites and other functional materials in nanostructured- and heterojunction-type devices. In this review, we focus on the current progress in basic characterization studies to elucidate the interfacial energetics (energy-level alignment and band bending) and dynamical processes (from the ultrafast to the ultraslow) in organic–inorganic metal halide perovskite photovoltaics and light emitters. Major findings from these studies will be distilled. Open questions and scientific challenges will also be highlighted. (topical review)

Controllable Photovoltaic Grid Power Injection with an Assistance of Energy Storage System

DEFF Research Database (Denmark)

Morvaj, Boran; Dragicevic, Tomislav; Krajcar, Slavko

2013-01-01

This paper focuses on modeling and simulation of controllable Photovoltaic Battery Power System (PV BPS) interconnected to the electrical utility. After elaboration of modeling principles for different components appearing in the system, simulations of two types of PV plants connected to one branch...... of distribution network have been carried out. First one is connected through a three-phase inverter with battery string connected to a DC-link and the second string is connected to the grid in single phase configuration. In this proposed configuration unpredictable variations of irradiation and temperature...

Photovoltaic energy barometer

International Nuclear Information System (INIS)

Anon

2006-01-01

The european market showed all of its strength and soundness in 2005. The 2005 installed cells growth could have been even greater if the market had not been continually curbed by a lack of raw materials. Germany remained the leading photovoltaic market in the world in 2005, positioned far ahead of Japan and the USA. This unabashed success inspired both Spain and Italy, which set up conditions in order to rapidly develop their photovoltaic sectors. (A.L.B.)

Principles of Optics

Science.gov (United States)

Born, Max; Wolf, Emil

1999-10-01

Principles of Optics is one of the classic science books of the twentieth century, and probably the most influential book in optics published in the past forty years. This edition has been thoroughly revised and updated, with new material covering the CAT scan, interference with broad-band light and the so-called Rayleigh-Sommerfeld diffraction theory. This edition also details scattering from inhomogeneous media and presents an account of the principles of diffraction tomography to which Emil Wolf has made a basic contribution. Several new appendices are also included. This new edition will be invaluable to advanced undergraduates, graduate students and researchers working in most areas of optics.

Photovoltaic policy is questioned

International Nuclear Information System (INIS)

Piro, P.; Cessac, M.

2011-01-01

The French government has decided a freeze and a reassessment of the measures taken to support the photovoltaic sector. Only the installations with a power output over 3 kWc are concerned so the market of solar roofs for homes is spared. The main reasons for this reversal is the quick and chaotic development of photovoltaic projects, a lot of projects are only motivated by the lure of high purchase prices of the electricity produced imposed by the law on EDF. Another reason is that 90% of the solar panels installed in France come from China, the photovoltaic sector retorts that 75% of the price of a complete installation pays for services produced in France. (A.C.)

Description of basic mining legal principles.

Science.gov (United States)

Schmidt, Reinhard

2014-01-01

The Federal Mining Act manages access, via the system of mining concessions, to areas free for mining natural resources that do not belong to the surface property and deposits' owner. These cover especially important natural resources for the economy, including coal, ore, salt, crude oil and natural gas, and also terrestrial heat. For mining operations there exist, however, the same decrees for natural resources in the property of the surface owners, which are predominantly higher-value industrial minerals such as roofing slate, basalt, quartz sand, and clays for the fireproofing industry. In the case of mining laws, administrative procedures such as issuing mining concessions, approving operating plans, and issuing permits or licenses to explore according to water rights or the Federal Immission Control Act, those authorities and departments in whose remit the projects fall are dealt with by the Mining Authority. This means that the Mining Authority is the only state point of contact for the applicant, essentially an "all-in-one" service as it will itself instigate any further participation procedures required. The classic licensing procedure of mining is the operations plan procedure, whereby the operator submits an operating plan to the Mining Authority, which then examines it to ensure it fulfills mandatory legal safety objectives. If necessary these safety objectives can be met during licensing of the operating plans by stipulating additional requirements, Depending on the subject and validity period there are overall operating plans having the widest possible remit with comprehensive participation by the authorities and basic operating plans that form the basis for every mining works. There are also special operating plans, which owing to the dynamics of mining, resolve matters that suddenly become necessary or when the basic operating plans as originally conceived were not relevant. The closing-down operating plan is the designated tool for closing down

Stereochemistry basic concepts and applications

CERN Document Server

Nógrádi, M

2013-01-01

Stereochemistry: Basic Concepts and Applications is a three-chapter text that introduces the basic principles and concepts of stereochemistry, as well as its application to organic chemistry application.Chapter 1 describes first the stereochemistry of the ground state, specifically the configuration and conformation of organic compounds, as well as the most important methods for its investigation. This chapter also deals with the kinetics of conformational changes and provides an overview of the so-called ""applied stereochemistry"". Chapter 2 focuses on the analysis of the internal motions of

Assessing the Efficacy of Mobile Health Apps Using the Basic Principles of Cognitive Behavioral Therapy: Systematic Review.

Science.gov (United States)

Rathbone, Amy Leigh; Clarry, Laura; Prescott, Julie

2017-11-28

Cognitive behavioral therapy (CBT) in its basic principle has developed itself as a stand-alone, substantial method of therapy. With effective application in therapy for a range of mental health issues, the spread of CBT methods to Web-based therapy sources is evident. The development of mobile phone apps using CBT principles is increasing within the research area. Despite the move to Web-based methods of therapy, it is argued that these methods lack the same efficacy of face-to-face therapy sessions. The aim of this review was to assess extent research findings with regard to the effectiveness of CBT-related mobile health (mHealth) apps. By assessing only studies employing a randomized controlled trial design, the review aimed to determine app efficacy within the highly regarded method of investigation. A comprehensive literature search was conducted across several databases. Search results were filtered, and results were subject to strict inclusion and exclusion criteria because of the nature of the review. Where possible, analysis of effect size was calculated and results reported. A total of 8 studies investigating the effectiveness of mHealth CBT-related apps across a range of mental health issues were reviewed. Three studies used the app against a control group, and 5 studies used the app intervention against another form of treatment or intervention. A range of effect sizes were seen across all included studies (d=-0.13 to 1.83; 0.03-1.44), with the largest effects often being seen when comparing the data from pre- to posttest for the app engaged group. The studies reviewed support the use of mHealth apps containing CBT principles for a range of mental health issues. However, the effectiveness over longer time periods should be assessed. Researchers and professionals should seek to collaborate effectively when creating new apps to enhance their effectiveness as a treatment for the general public. ©Amy Leigh Rathbone, Laura Clarry, Julie Prescott

Basic principles of medical aid in cases of radiation accidents

International Nuclear Information System (INIS)

Andreev, E.; Mikhajlov, M.A.; Bliznakov, V.

1979-01-01

A model scheme has been presented of medical aid organization in emergency cases of irradiation. The tasks of medical service have been pointed out in connection with evacuation stages, bulk of medical aid depending on the natur of radiation damages, first aid and some general principles of radiation sickness treatment. (author)

Optimal sizing of utility-scale photovoltaic power generation complementarily operating with hydropower: A case study of the world’s largest hydro-photovoltaic plant

International Nuclear Information System (INIS)

Fang, Wei; Huang, Qiang; Huang, Shengzhi; Yang, Jie; Meng, Erhao; Li, Yunyun

2017-01-01

Highlights: • Feasibility of complementary hydro-photovoltaic operation across the world is revealed. • Three scenarios of the novel operation mode are proposed to satisfy different load demand. • A method for optimally sizing a utility-scale photovoltaic plant is developed by maximizing the net revenue during lifetime. • The influence of complementary hydro-photovoltaic operation upon water resources allocation is investigated. - Abstract: The high variability of solar energy makes utility-scale photovoltaic power generation confront huge challenges to penetrate into power system. In this paper, the complementary hydro-photovoltaic operation is explored, aiming at improving the power quality of photovoltaic and promoting the integration of photovoltaic into the system. First, solar-rich and hydro-rich regions across the world are revealed, which are suitable for implementing the complementary hydro-photovoltaic operation. Then, three practical scenarios of the novel operation mode are proposed for better satisfying different types of load demand. Moreover, a method for optimal sizing of a photovoltaic plant integrated into a hydropower plant is developed by maximizing the net revenue during lifetime. Longyangxia complementary hydro-photovoltaic project, the current world’s largest hydro-photovoltaic power plant, is selected as a case study and its optimal photovoltaic capacities of different scenarios are calculated. Results indicate that hydropower installed capacity and annual solar curtailment rate play crucial roles in the size optimization of a photovoltaic plant and complementary hydro-photovoltaic operation exerts little adverse effect upon the water resources allocation of Longyangxia reservoir. The novel operation mode not only improves the penetration of utility-scale photovoltaic power generation but also can provide a valuable reference for the large-scale utilization of other kinds of renewable energy worldwide.

Recent progresses and achievements in photovoltaic-phase change material technology: A review with special treatment on photovoltaic thermal-phase change material systems

International Nuclear Information System (INIS)

Islam, M.M.; Pandey, A.K.; Hasanuzzaman, M.; Rahim, N.A.

2016-01-01

Highlights: • Broad summary of phase change materials based cooling for photovoltaic modules. • Compendium on phase change materials that are mostly used in photovoltaic systems. • Extension of heat availability period by 75–100% with phase change material. • Heat storage potential improves by 33–50% more with phase change material. • Future trend and move in photovoltaic thermal research. - Abstract: This communication lays out an appraisal on the recent works of phase change materials based thermal management techniques for photovoltaic systems with special focus on the so called photovoltaic thermal-phase change material system. Attempt has also been made to draw wide-ranging classification of both photovoltaic and photovoltaic thermal systems and their conventional cooling or heat harvesting methods developed so far so that feasible phase change materials application area in these systems can be pointed out. In addition, a brief literature on phase change materials with particular focus on their solar application has also been presented. Overview of the researches and studies establish that using phase change materials for photovoltaic thermal control is technically viable if some issues like thermal conductivity or phase stability are properly addressed. The photovoltaic thermal-phase change material systems are found to offer 33% (maximum 50%) more heat storage potential than the conventional photovoltaic-thermal water system and that with 75–100% extended heat availability period and around 9% escalation in output. Reduction in temperature attained with photovoltaic thermal-phase change material system is better than that with regular photovoltaic-thermal water system, too. Studies also show the potential of another emerging technology of photovoltaic thermal-microencapsulated phase change material system that makes use of microencapsulated phase change materials in thermal regulation. Future focus areas on photovoltaic thermal-phase change

Photovoltaic Technology and Applications | Othieno | Discovery and ...

African Journals Online (AJOL)

Photovoltaic home systems appear to be the most viable alternative source of electricity. The photovoltaic technology is therefore reviewed and recommendations made on their application for rural electrification in the developing nations. Keywords: solar energy, photovoltaic materials, electrification, rural power, cost, ...

Photorefraction in crystals with nonstationary photovoltaic current

International Nuclear Information System (INIS)

Volk, T.R.; Astaf'ev, S.B.; Razumovskij, N.V.

1995-01-01

Effect of photovoltaic current nonstationary components, conditioned by nonstationary character of photovoltaic centers, on photorefractive properties of LiNbO 3 crystals is considered. Analytic expressions describing nonstationary photovoltaic current effect on kinetics of recording and optical erasure of photorefraction are obtained. A possibility of nonstationary photovoltaic current occurrence in crystals with multilevel charge transfer circuit is considered. Recording light pulse duration effect on photorefraction in LiNbO 3 is discussed. 25 refs., 8 figs

Spectrally-engineered solar thermal photovoltaic devices

Science.gov (United States)

Lenert, Andrej; Bierman, David; Chan, Walker; Celanovic, Ivan; Soljacic, Marin; Wang, Evelyn N.; Nam, Young Suk; McEnaney, Kenneth; Kraemer, Daniel; Chen, Gang

2018-03-27

A solar thermal photovoltaic device, and method of forming same, includes a solar absorber and a spectrally selective emitter formed on either side of a thermally conductive substrate. The solar absorber is configured to absorb incident solar radiation. The solar absorber and the spectrally selective emitter are configured with an optimized emitter-to-absorber area ratio. The solar thermal photovoltaic device also includes a photovoltaic cell in thermal communication with the spectrally selective emitter. The spectrally selective emitter is configured to permit high emittance for energies above a bandgap of the photovoltaic cell and configured to permit low emittance for energies below the bandgap.

Energizing architecture. Design and photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Lueling, Claudia (ed.)

2009-07-01

Power generation by photovoltaic systems and buildings is much more than just an alternative to traditional electric power generation. As the planning and design of photovoltaics is increasingly shifting to the forefront, it is rapidly becoming a new challenge for architecture. This book describes the whole spectrum of possible applications - from inspiration to detail - of photovoltaics as an integral part of building envelopes and introduces groundbreaking examples and visions for the future, in which photovoltaic elements work as a successful part of exterior facades - combined with highly luminous and economical illuminated wallpaper and curtains inside buildings. Its range extends from early designs by artists such as Daniel Hausig to aspects of material selection to detail drawings of implemented solutions. The enormous variety of possible applications of this new (building) material demonstrates the huge potential it possesses. (orig.)

A sensitivity analysis of central flat-plate photovoltaic systems and implications for national photovoltaics program planning

Science.gov (United States)

Crosetti, M. R.

1985-01-01

The sensitivity of the National Photovoltaic Research Program goals to changes in individual photovoltaic system parameters is explored. Using the relationship between lifetime cost and system performance parameters, tests were made to see how overall photovoltaic system energy costs are affected by changes in the goals set for module cost and efficiency, system component costs and efficiencies, operation and maintenance costs, and indirect costs. The results are presented in tables and figures for easy reference.

Lattice dynamics, phase transition, and tunable fundamental band gap of photovoltaic (K,Ba)(Ni,Nb)O3 -δ ceramics from spectral measurements and first-principles calculations

Science.gov (United States)

Li, Chuanqian; Wang, Fang; Sun, Yuyun; Jiang, Kai; Gong, Shijing; Hu, Zhigao; Zhou, Zhiyong; Dong, Xianlin; Chu, Junhao

2018-03-01

Ferroelectrics have long been recognized as one of the candidate class of materials for applications in photovoltaic devices. Recently, ferroelectric perovskite (K,Ba) (Ni,Nb) O3 -δ has been successfully synthesized and demonstrated to have a near-optimal band gap (1.39 eV), exhibiting good photovoltaic performance. However, the connection between the structural order-disorder transformation, electronic structure, bulk photovoltaic, and photocatalytic properties remains not well understood. Here, we investigate the phase transition evolutions of lead-free [KNbO3]1-x[BaNi1/2Nb1/2O3 -δ] x (KBNNO x , x =0 -0.5 ) ceramics via x-ray diffraction (XRD), Raman scattering, and computational evidences. The lattice dynamics and the origin of the successive rhombohedral→orthorhombic→tetragonal→cubic phase transitions have been systemically explored based on temperature-dependent XRD peak positions and phonon modes under different geometries. Moreover, the differences in the phase transition temperature and interior structure between the solid solution x =0.2 and the end member x =0 highlight local and nonlocal characteristics, which are helpful for understanding the photovoltaic mechanisms. Additionally, the robust photocatalytic decoloration effect on methylene blue can further confirm the photon-generated carrier behavior in the partly structural disordered orthorhombic phase. This identification of structural phases, combined with the ability to perform photocatalytic decoloration, give some insights on promising oxide applications as semiconducting ferroelectric absorbers and carrier-separating layers in photocatalytic or photovoltaic devices.

Grid-Tied Photovoltaic Power System

Science.gov (United States)

Eichenberg, Dennis J.

2011-01-01

A grid-tied photovoltaic (PV) power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. Operating costs of a PV power system are low compared to conventional power technologies. This method can displace the highest-cost electricity during times of peak demand in most climatic regions, and thus reduce grid loading. Net metering is often used, in which independent power producers such as PV power systems are connected to the utility grid via the customers main service panels and meters. When the PV power system is generating more power than required at that location, the excess power is provided to the utility grid. The customer pays the net of the power purchased when the on-site power demand is greater than the onsite power production, and the excess power is returned to the utility grid. Power generated by the PV system reduces utility demand, and the surplus power aids the community. Modern PV panels are readily available, reliable, efficient, and economical, with a life expectancy of at least 25 years. Modern electronics have been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy equal to the modern PV panels. The grid-tied PV power system was successfully designed and developed, and this served to validate the basic principles developed, and the theoretical work that was performed. Grid-tied PV power systems are reliable, maintenance- free, long-life power systems, and are of significant value to NASA and the community. Of particular value are the analytical tools and capabilities that have been successfully developed. Performance predictions can be made confidently for grid-tied PV systems of various scales. The work was done under the NASA Hybrid Power Management (HPM

Overview of new-generation photovoltaic technologies

International Nuclear Information System (INIS)

Della Sala, D.; Moro, A.; Fidanza, A.; Di Francia, G.; Giorgi, R.

2008-01-01

The number of photovoltaic installation is rising in Italy, but they are all based on imported technologies. This article describes some new types of photovoltaic cells that benefit from powerful synergies with other sectors. ENEA can help speed their development by exploiting its long experience with photovoltaic and the growing body of know-how on the new frontiers of electronics and new materials [it

Optimization of photovoltaic power systems

CERN Document Server

Rekioua, Djamila

2012-01-01

Photovoltaic generation is one of the cleanest forms of energy conversion available. One of the advantages offered by solar energy is its potential to provide sustainable electricity in areas not served by the conventional power grid. Optimisation of Photovoltaic Power Systems details explicit modelling, control and optimisation of the most popular stand-alone applications such as pumping, power supply, and desalination. Each section is concluded by an example using the MATLAB(R) and Simulink(R) packages to help the reader understand and evaluate the performance of different photovoltaic syste

Silicon processing for photovoltaics II

CERN Document Server

Khattak, CP

2012-01-01

The processing of semiconductor silicon for manufacturing low cost photovoltaic products has been a field of increasing activity over the past decade and a number of papers have been published in the technical literature. This volume presents comprehensive, in-depth reviews on some of the key technologies developed for processing silicon for photovoltaic applications. It is complementary to Volume 5 in this series and together they provide the only collection of reviews in silicon photovoltaics available.The volume contains papers on: the effect of introducing grain boundaries in silicon; the

Trends of Photovoltaic Research, Development and Diffusion

Energy Technology Data Exchange (ETDEWEB)

Song, J. S.; Yoon, K. H.; Yu, K. J. [Korea Institute of Energy Research (Korea)

2000-07-01

The Korean National Photovoltaic Project was initiated on October 1989 to develop technologies for the generation of economically competitive electric power by photovoltaic systems. It consists of four stages through the year 2006 with technical goals and cost targets related with solar cells, balance of systems and system application. The objectives of the project are to utilize photovoltaic technology, to transfer developed technology to industries and end users by research activities and to diffuse photovoltaic systems by demonstration projects. This paper reviews long-term plan and status of technology R and D, and markets of photovoltaic. Some activities designed to promote collaboration with foreign countries are also introduced. (author). 14 refs., 3 figs., 3 tabs.

Basic principles of STT-MRAM cell operation in memory arrays

International Nuclear Information System (INIS)

Khvalkovskiy, A V; Apalkov, D; Watts, S; Chepulskii, R; Beach, R S; Ong, A; Tang, X; Driskill-Smith, A; Lottis, D; Chen, E; Nikitin, V; Krounbi, M; Butler, W H; Visscher, P B

2013-01-01

For reliable operation, individual cells of an STT-MRAM memory array must meet specific requirements on their performance. In this work we review some of these requirements and discuss the fundamental physical principles of STT-MRAM operation, covering the range from device level to chip array performance, and methodology for its development. (paper)

Home Photovoltaic System Design in Pangkalpinang City

Science.gov (United States)

Sunanda, Wahri

2018-02-01

This research aims to obtain the design of home photovoltaic systems in Pangkalpinang and the opportunity of economic savings. The system consists of photovoltaic with batteries. Based on electricity consumption of several houses with installed power of 1300 VA and 2200 VA in Pangkalpinang for one year, the daily load of photovoltaic system is varied to 40%, 30% and 20% of the average value of the daily home electricity consumption. The investment costs, the cost of replacement parts and the cost of electricity consumption accrued to PLN during lifetime of systems (25 years) are also calculated. The result provided that there are no economic saving opportunities for photovoltaic systems with batteries at home with installed power of 1300 VA and 2200 VA in Pangkalpinang. The most economical is the photovoltaic system with the daily load of 20% of the average value of the daily home electricity consumption. The configuration of photovoltaic system for 1300 VA home consists of 10 modules of 200 wattpeak and 4 batteries 150 AH, 12 Volt while photovoltaic system for 2200 VA home consists of 15 modules of 200 wattpeak and 6 batteries 150 AH,12Volt.

The Oscillator Principle of Nature

DEFF Research Database (Denmark)

Lindberg, Erik

2012-01-01

Oscillators are found on all levels in Nature. The general oscillator concept is defined and investigated. Oscillators may synchronize into fractal patterns. Apparently oscillators are the basic principle in Nature. The concepts of zero and infinite are discussed. Electronic manmade oscillators...

International photovoltaic products and manufacturers directory, 1995

Energy Technology Data Exchange (ETDEWEB)

Shepperd, L.W. [ed.] [Florida Solar Energy Center, Cocoa, FL (United States)

1995-11-01

This international directory of more than 500 photovoltaic-related manufacturers is intended to guide potential users of photovoltaics to sources for systems and their components. Two indexes help the user to locate firms and materials. A glossary describes equipment and terminology commonly used in the photovoltaic industry.

Synthesis and characterization of NaSbS2 thin film for potential photodetector and photovoltaic application

Institute of Scientific and Technical Information of China (English)

Zhe Xia; Jiang Tang; Feng-Xin Yu; Shuai-Cheng Lu; Ding-Jiang Xue; Yi-Su He; Bo Yang; Chong Wang; Rui-Qing Ding; Jie Zhong

2017-01-01

Solution-processed semiconductors such as perovskite compounds have attracted tremendous attention to photovoltaic research due to the significantly higher energy conversion efficiencies and lower processing costs.However,concerns over stability and the toxicity on lead in CH3NH3PbI3 create the need for still easily-accessible but more stable and environmentally friendly materials.Here,we present NaSbS2 as a non-toxic,earth-abundant promising material consisting of densely packed (1/∞) [SbS2-] polymeric chains and sodium ions.The ionic nature makes it sharing the similar dissolution superiority with perovskite,providing great potential for low-cost and large-scale fabrication.Phase pure NaSbS2 thin film was successfully fabricated using spray-pyrolysis method,and its photovoltaic relevant material,optical and electrical properties were carefully studied.Finally,a prototype NaSbS2-based thinfilm solar cell has been successfully demonstrated,yielding a power conversion efficiency of 0.13％.The systematic experimental and theoretical investigations,combined with proof-of-principle device results,indicate that NaSbS2 is indeed very promising for photovoltaic application.

Photovoltaic energy in Germany: experience feedback

International Nuclear Information System (INIS)

Persem, Melanie

2011-01-01

This document presents some key information and figures about the development of photovoltaic energy in Germany: resource potential, 2000-2010 development, share in the energy mix, market, legal framework and incentives, market evolution and electricity feed-in tariffs, 2006-2011 evolution of photovoltaic power plant costs, households' contribution, R and D investments, industry development and employment, the German national energy plan after Fukushima, the expectations of the German photovoltaic industry

Photovoltaics manufacturer's overview of interactions with customers of photovoltaic products

Energy Technology Data Exchange (ETDEWEB)

Darkazalli, G.

1982-11-01

Communications between the customer and manufacturer of photovoltaic products often require time-consuming interaction before each has the necessary information. Customers appear not to know what information is needed by the supplier to size photovoltaic systems properly nor are they adequately able to estimate their own system needs. Customers can make unrealistic measurement demands and do not provide feedback to the supplier on system performance in the field.

Solid-state NMR basic principles and practice

CERN Document Server

Apperley, David C; Hodgkinson, Paul

2014-01-01

Nuclear Magnetic Resonance (NMR) has proved to be a uniquely powerful and versatile tool for analyzing and characterizing chemicals and materials of all kinds. This book focuses on the latest developments and applications for "solid-state" NMR, which has found new uses from archaeology to crystallography to biomaterials and pharmaceutical science research. The book will provide materials engineers, analytical chemists, and physicists, in and out of lab, a survey of the techniques and the essential tools of solid-state NMR, together with a practical guide on applications. In this concise introduction to the growing field of solid-state nuclear magnetic resonance spectroscopy The reader will find: * Basic NMR concepts for solids, including guidance on the spin-1/2 nuclei concept * Coverage of the quantum mechanics aspects of solid state NMR and an introduction to the concept of quadrupolar nuclei * An understanding relaxation, exchange and quantitation in NMR * An analysis and interpretation of NMR data, with e...

Penetration of Photovoltaics in Greece

Directory of Open Access Journals (Sweden)

Eugenia Giannini

2015-06-01

Full Text Available Recently, an interesting experiment was completed in Greece concerning photovoltaic penetration into the electricity production sector. Based on the relevant laws and in accordance to the related European directives, an explosive penetration process was completed in less than three years, resulting in a 7% share of photovoltaics in electricity production instead of the previous negligible share. The legislation was based on licensing simplification and generous feed-in-tariffs. This approach transformed photovoltaic technology from a prohibitively expensive to a competitive one. This work aims to summarize the relevant legislation and illustrate its effect on the resulting penetration. A sigmoid-shape penetration was observed which was explained by a pulse-type driving force. The return on investment indicator was proposed as an appropriate driving force, which incorporates feed-in-tariffs and turnkey-cost. Furthermore, the resulting surcharge on the electricity price due to photovoltaic penetration was also analyzed.

Photovoltaic heterojunctions of fullerenes with MoS2 and WS2 monolayers

KAUST Repository

Gan, Liyong

2014-04-17

First-principles calculations are performed to explore the geometry, bonding, and electronic structures of six ultrathin photovoltaic heterostructures consisting of pristine and B- or N-doped fullerenes and MoS2 or WS2 monolayers. The fullerenes prefer to be attached with a hexagon parallel to the monolayer, where B and N favor proximity to the monolayer. The main electronic properties of the subsystems stay intact, suggesting weak interfacial interaction. Both the C60/MoS 2 and C60/WS2 systems show type-II band alignments. However, the built-in potential in the former case is too small to effectively drive electron-hole separation across the interface, whereas the latter system is predicted to show good photovoltaic performance. Unfortunately, B and N doping destroys the type-II band alignment on MoS2 and preserves it only in one spin channel on WS2, which is unsuitable for excitonic solar cells. Our results suggest that the C60/WS 2 system is highly promising for excitonic solar cells. © 2014 American Chemical Society.

The Possibility of Phase Change Materials (PCM Usage to Increase Efficiency of the Photovoltaic Modules

Directory of Open Access Journals (Sweden)

Klugmann-Radziemska Ewa

2014-01-01

Full Text Available Solar energy is widely available, free and inexhaustible. Furthermore this source of energy is the most friendly to the environment. For direct conversion of solar energy into useful forms like of electricity and thermal energy, respectively photovoltaic cells and solar collectors are being used. Forecast indicate that the first one solution will soon have a significant part in meeting the global energy demand. Therefore it is highly important to increase their efficiency in the terms of providing better energy conversion conditions. It can be obtain by designing new devices or by modifications of existing ones. This article presents general issues of photovoltaic installations exposed to work in high temperatures and basic concepts about phase change materials (PCMs. The paper presents the possibility of PCM usage to receive heat from the photovoltaic module. Specially designed test stand, consisting of PV module covered with a layer of PCM has been build and tested. Current-voltage characteristics of the cell without PCM material and with a layer of PCM have been presented. Authors also describe the results of the electrical and thermal characteristic of a coupled PV-PCM system.

Microinverters for employment in connection with photovoltaic modules

Science.gov (United States)

Lentine, Anthony L.; Nielson, Gregory N.; Okandan, Murat; Johnson, Brian Benjamin; Krein, Philip T.

2015-09-22

Microinverters useable in association with photovoltaic modules are described. A three phase-microinverter receives direct current output generated by a microsystems-enabled photovoltaic cell and converts such direct current output into three-phase alternating current out. The three-phase microinverter is interleaved with other three-phase-microinverters, wherein such microinverters are integrated in a photovoltaic module with the microsystems-enabled photovoltaic cell.

Theoretical assessment of the maximum power point tracking efficiency of photovoltaic facilities with different converter topologies

Energy Technology Data Exchange (ETDEWEB)

Enrique, J.M.; Duran, E.; Andujar, J.M. [Departamento de Ingenieria Electronica, de Sistemas Informaticos y Automatica, Universidad de Huelva (Spain); Sidrach-de-Cardona, M. [Departamento de Fisica Aplicada, II, Universidad de Malaga (Spain)

2007-01-15

The operating point of a photovoltaic generator that is connected to a load is determined by the intersection point of its characteristic curves. In general, this point is not the same as the generator's maximum power point. This difference means losses in the system performance. DC/DC converters together with maximum power point tracking systems (MPPT) are used to avoid these losses. Different algorithms have been proposed for maximum power point tracking. Nevertheless, the choice of the configuration of the right converter has not been studied so widely, although this choice, as demonstrated in this work, has an important influence in the optimum performance of the photovoltaic system. In this article, we conduct a study of the three basic topologies of DC/DC converters with resistive load connected to photovoltaic modules. This article demonstrates that there is a limitation in the system's performance according to the type of converter used. Two fundamental conclusions are derived from this study: (1) the buck-boost DC/DC converter topology is the only one which allows the follow-up of the PV module maximum power point regardless of temperature, irradiance and connected load and (2) the connection of a buck-boost DC/DC converter in a photovoltaic facility to the panel output could be a good practice to improve performance. (author)

Device Performance of the Mott InsulatorDevice Performance of the Mott Insulator LaVO3 as a Photovoltaic Material

KAUST Repository

Wang, Lingfei

2015-06-22

Searching for solar-absorbing materials containing earth-abundant elements with chemical stability is of critical importance for advancing photovoltaic technologies. Mott insulators have been theoretically proposed as potential photovoltaic materials. In this paper, we evaluate their performance in solar cells by exploring the photovoltaic properties of Mott insulator LaVO3 (LVO). LVO films show an indirect band gap of 1.08 eV as well as strong light absorption over a wide wavelength range in the solar spectrum. First-principles calculations on the band structure of LVO further reveal that the d−d transitions within the upper and lower Mott-Hubbard bands and p−d transitions between the O 2p and V 3d band contribute to the absorption in visible and ultraviolet ranges, respectively. Transport measurements indicate strong carrier trapping and the formation of polarons in LVO. To utilize the strong light absorption of LVO and to overcome its poor carrier transport, we incorporate it as a light absorber in solar cells in conjunction with carrier transporters and evaluate its device performance. Our complementary experimental and theoretical results on such prototypical solar cells made of Mott-Hubbard transition-metal oxides pave the road for developing light-absorbing materials and photovoltaic devices based on strongly correlated electrons.

Photovoltaic module with adhesion promoter

Science.gov (United States)

Xavier, Grace

2013-10-08

Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

Principles of digital image synthesis

CERN Document Server

Glassner, Andrew S

1995-01-01

Image synthesis, or rendering, is a field of transformation: it changesgeometry and physics into meaningful images. Because the most popularalgorithms frequently change, it is increasingly important for researchersand implementors to have a basic understanding of the principles of imagesynthesis. Focusing on theory, Andrew Glassner provides a comprehensiveexplanation of the three core fields of study that come together to formdigital image synthesis: the human visual system, digital signalprocessing, and the interaction of matter and light. Assuming no more thana basic background in calculus,

Dynamic thermal model of photovoltaic cell illuminated by laser beam

Science.gov (United States)

Liu, Xiaoguang; Hua, Wenshen; Guo, Tong

2015-07-01

Photovoltaic cell is one of the most important components of laser powered unmanned aerial vehicle. Illuminated by high power laser beam, photovoltaic cell temperature increases significantly, which leads to efficiency drop, or even physical damage. To avoid such situation, the temperature of photovoltaic cell must be predicted precisely. A dynamic thermal model of photovoltaic cell is established in this paper, and the relationships between photovoltaic cell temperature and laser power, wind speed, ambient temperature are also analyzed. Simulation result indicates that illuminated by a laser beam, the temperature of photovoltaic cell rises gradually and reach to a constant maximum value. There is an approximately linear rise in photovoltaic cell temperature as the laser flux gets higher. The higher wind speed is, the stronger forced convection is, and then the lower photovoltaic cell temperature is. But the relationship between photovoltaic cell temperature and wind speed is not linear. Photovoltaic cell temperature is proportional to the ambient temperature. For each increase of 1 degree of ambient temperature, there is approximate 1 degree increase in photovoltaic cell temperature. The result will provide fundamentals to take reasonable measures to control photovoltaic cell temperature.

Photovoltaic building sheathing element with anti-slide features

Science.gov (United States)

Keenihan, James R.; Langmaid, Joseph A.; Lopez, Leonardo C.

2015-09-08

The present invention is premised` upon an assembly that includes at least a photovoltaic building sheathing element capable of being affixed on a building structure, the photovoltaic building sheathing element. The element including a photovoltaic cell assembly, a body portion attached to one or more portions of the photovoltaic cell assembly; and at feast a first and a second connector assembly capable of directly or indirectly electrically connecting the photovoltaic cell assembly to one or more adjoining devices; wherein the body portion includes one or more geometric features adapted to engage a vertically adjoining device before installation.

In situ KPFM imaging of local photovoltaic characteristics of structured organic photovoltaic devices.

Science.gov (United States)

Watanabe, Satoshi; Fukuchi, Yasumasa; Fukasawa, Masako; Sassa, Takafumi; Kimoto, Atsushi; Tajima, Yusuke; Uchiyama, Masanobu; Yamashita, Takashi; Matsumoto, Mutsuyoshi; Aoyama, Tetsuya

2014-02-12

Here, we discuss the local photovoltaic characteristics of a structured bulk heterojunction, organic photovoltaic devices fabricated with a liquid carbazole, and a fullerene derivative based on analysis by scanning kelvin probe force microscopy (KPFM). Periodic photopolymerization induced by an interference pattern from two laser beams formed surface relief gratings (SRG) in the structured films. The surface potential distribution in the SRGs indicates the formation of donor and acceptor spatial distribution. Under illumination, the surface potential reversibly changed because of the generation of fullerene anions and hole transport from the films to substrates, which indicates that we successfully imaged the local photovoltaic characteristics of the structured photovoltaic devices. Using atomic force microscopy, we confirmed the formation of the SRG because of the material migration to the photopolymerized region of the films, which was induced by light exposure through photomasks. The structuring technique allows for the direct fabrication and the control of donor and acceptor spatial distribution in organic photonic and electronic devices with minimized material consumption. This in situ KPFM technique is indispensable to the fabrication of nanoscale electron donor and electron acceptor spatial distribution in the devices.

Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Research and development of photovoltaic power generation system evaluation technology (Research and development of system evaluation technology); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu (system hyoka gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development is conducted for the acquisition of a system evaluation technique for predicting the performance of standard photovoltaic power systems and evaluation technologies applicable to residential photovoltaic power systems different from each other in terms of tilt and direction, district, solar cell type, etc. In fiscal 1999, using data collected from the Hamamatsu field test facilities and residential photovoltaic power systems installed across Japan, various design parameters, such as the irregularity compensation coefficient, temperature compensation coefficient, and the incidence compensation coefficient were determined, and, using the parameters as the secondary estimation values, design parameters were updated. In the development of simulation technologies, basic studies were made about the shadow compensation coefficient, spectral response fluctuation compensation coefficient, and the composition of polyhedral arrays. Moreover, studies were made about the estimation of large area insolation, based on the horizontal surface insolation data collected at 21 sites of residential photovoltaic power systems in the Kanto district. (NEDO)

Optimizing Grid Patterns on Photovoltaic Cells

Science.gov (United States)

Burger, D. R.

1984-01-01

CELCAL computer program helps in optimizing grid patterns for different photovoltaic cell geometries and metalization processes. Five different powerloss phenomena associated with front-surface metal grid pattern on photovoltaic cells.

Photovoltaic Self-Consumption; Autoconsumo fotovoltaico

Energy Technology Data Exchange (ETDEWEB)

Alonso Abella, M.; Chenlo Romero, F.

2013-02-01

This paper analyzes the photovoltaic (PV) self consumption, or the option of using photovoltaic systems connected to the electric grid for the purpose of consuming the PV generated energy in the own installation (homes, small industries, office buildings, etc.) in order to reduce the external demand and the electric bill. At this time there is a legal vacuum regarding the installation of these generation systems for self-consumption, and the PV business sector and society are calling for the establishment of a legal and economic framework. Assuming that what can be saved with a photovoltaic system for domestic self-consumption is the cost of the kWh consumed currently 15c/kWh that there are no additional charges and that the cost of the turnkey photovoltaic system currently ranges from 1.8/Wp to 2.5/Wp, the resulting amortization period would be between 8 and 11 years for the condition of annual net metering. (Author) 31 refs.

Fiscal 1999 research report. Data collection for development of new energy technology (Photovoltaic power generation); 1999 nendo shin energy gijutsu kaihatsu kankei data shu sakusei chosa (taiyoko hatsuden) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As a part of systematic data preparations on new energy technology, this research aims at collection and analysis of data on domestic and overseas applications, diffusion targets, concrete examples, policies, laws, subsidy systems, and the latest technology development trends of photovoltaic power generation, and at preparation of its basic data through integration and systematization of the collected data. The research items are as follows: domestic and overseas applications, diffusion targets, concrete examples, policies, laws, subsidy systems, productions of solar cells, typical photovoltaic power generation costs, trial calculations of CO{sub 2} reduction in photovoltaic power generation, technology development trends, technology development issues, issues for faster diffusion, configurations and conceptual charts of photovoltaic power systems, and major domestic and overseas trends. As a supplement, domestic and overseas manufacturers of solar cells, and manufacturers of photovoltaic power systems are listed with their addresses. The solar cell production capacities of major countries are also arranged. (NEDO)

On the economics of basic liberties

NARCIS (Netherlands)

Weikard, H.P.

2004-01-01

The paper discusses the problem of initial assignments of rights. An attempt is made to characterise a system of rights in the spirit of Rawls's first principle of justice according to which society should adopt the most extensive system of equal basic liberties.

Characterization and Monitoring of a Self-Constructible Photovoltaic-Based Refrigerator

Directory of Open Access Journals (Sweden)

Claudio Del Pero

2016-09-01

Full Text Available At present, in the developing countries, the power grids do not reach every small town and, even when they do, they are not reliable. For this reason, preservation of food and medicines is a sensitive issue for a large number of people. This work introduces the characterization of a new, self-constructible refrigerator, powered by photovoltaic (PV energy, suitable for the preservation of food in rural villages, with a specific focus on Africa’s tropical-equatorial belt. A thermally-insulated envelope, equipped with thermal energy storage, has been designed to be built on-site, by using local materials, and assembled with technical components (direct current (DC compressor, heat exchangers, photovoltaic module. The monitoring activity presented in this work was carried out on a first prototype of the system and enabled the validation of numerical simulations, aimed at assessing its appropriate operability under laboratory conditions. In particular, the work demonstrates that the basic module of the refrigerator, with a net capacity of 250 L and an ice storage of 12.5 kg, is able to maintain an internal temperature below 10 °C also in critical boundary conditions.

NREL Photovoltaic Program FY 1996 Annual Report

Energy Technology Data Exchange (ETDEWEB)

1997-08-01

This report summarizes the in-house and subcontract research and development (R&D) activities under the National Renewable Energy Laboratory (NREL) Photovoltaics (PV) Program from October 1, 1995 through September 30, 1996 (fiscal year [FY] 1996). The NREL PV Program is part of the U.S. Department of Energy's (DOE) National Photovoltaics Program, as described in the DOE Photovoltaics Program Plan, FY 1991 - FY 1995. The mission of the DOE National Photovoltaics Program is to: "Work in partnership with U.S. industry to develop and deploy photovoltaic technology for generating economically competitive electric power, making photovoltaics an important contributor to the nation's and the world's energy use and environmental improvement. The two primary goals of the national program are to (1) maintain the U.S. PV industry's world leadership in research and technology development and (2) help the U.S. industry remain a major, profitable force in the world market. The NREL PV Program provides leadership and support to the national program toward achieving its mission and goals.

Photovoltaic electricity applications: history and perspectives

International Nuclear Information System (INIS)

Juquois, F.

2010-01-01

The photoelectric effect has been characterized in 1839 by Henry Becquerel. More than one hundred years later, in 1958, the first photovoltaic cell is developed for the space exploration. After the first oil shock in 1973, the occidental governments have started considering photovoltaic as one of the potential alternative to fossil in the future. 36 years later, photovoltaic is blossoming on the roof tops of dwellings and commercial buildings, as well as on the poor agricultural value lands. (author)

Advances in Cost-Efficient Thin-Film Photovoltaics Based on Cu(In,Ga)Se2

OpenAIRE

Michael Powalla; Stefan Paetel; Dimitrios Hariskos; Roland Wuerz; Friedrich Kessler; Peter Lechner; Wiltraud Wischmann; Theresa Magorian Friedlmeier

2017-01-01

In this article, we discuss the leading thin-film photovoltaic (PV) technology based on the Cu(In,Ga)Se2 (CIGS) compound semiconductor. This contribution includes a general comparison with the conventional Si-wafer-based PV technology and discusses the basics of the CIGS technology as well as advances in world-record-level conversion efficiency, production, applications, stability, and future developments with respect to a flexible product. Once in large-scale mass production, the CIGS techno...

Oncology. Pt. 1. General part, epidemiology - pathogenesis - basic principles of therapy. 2. upd. ed.; Die Onkologie. T. 1. Allgemeiner Teil, Epidemiologie - Pathogenese - Grundprinzipien der Therapie

Energy Technology Data Exchange (ETDEWEB)

Hiddemann, Wolfgang [Muenchen Univ. Klinikum Grosshadern (Germany). Medizinische Klinik und Poliklinik III; Bartram Claus R. (eds.) [Heidelberg Univ. (Germany). Inst. fuer Humangenetik

2010-07-01

The book Oncology is aimed to communicate the compiled knowledge on tumor development and cancer: fundamental knowledge base, practice related know-how for diagnostics and therapy. Part 1 includes the following chapters: epidemiology and pathogenesis, basic principles of diagnostics, basic principles of therapy, complication of malign growth, tumors in the gastrointestinal tract, female genital carcinomas, kidney and urinary tract carcinomas, respiratory tract and lung carcinomas, carcinomas in the head - neck area, bone and soft tissue carcinomas, pediatric tumors, hematological neoplasm, other carcinomas. The book can be used as reference for clinical work. [German] Die gesamte Onkologie - verlaessliches Wissen fuer Ihre Kompetenz. ''Die Onkologie'' stellt sich der Herausforderung, das staendig wachsende Wissen ueber Tumorerkrankungen in seiner Gesamtheit zu vermitteln. Sowohl inhaltlich als auch didaktisch auf hoechsten Niveau: Fundiertes Grundlagenwissen zum umfassenden Nachschlagen Praxisrelevantes Know-how fuer Diagnostik und Therapie Systematischer Aufbau fuer das Verstaendnis der komplexen Zusammenhaenge Die Onkologie - eine Enzyklopaedie der modernen klinischen Tumorlehre. Angesehene Experten aus Klinik, Forschung und Praxis liefern Ihnen in Teil1 klinisches Grundlagenwissen zu den Grundprinzipien der Therapie, Epidemiologie, Aetiologie und Pathogenese, sowie zu Komplikationen des malignen Wachstums. Zum Nachschlagen und Anwenden: finden Sie alle Optionen - auch fuer Ihren schwierigsten Fall. Der uebersichtliche Aufbau und die exzellenten Abbildungen erleichtern Ihnen das schnelle Auffinden und Verstaendnis der gesuchten Informationen. Fuer den Alltag onkologisch taetiger Aerzte ist Die Onkologie ein unentbehrlicher Meilenstein. (orig.)

The four variational principles of mechanics

International Nuclear Information System (INIS)

Gray, C.G.; Karl, G.; Novikov, V.A.

1996-01-01

We argue that there are four basic forms of the variational principles of mechanics: Hamilton close-quote s least action principle (HP), the generalized Maupertuis principle (MP), and their two reciprocal principles, RHP and RMP. This set is invariant under reciprocity and Legendre transformations. One of these forms (HP) is in the literature: only special cases of the other three are known. The generalized MP has a weaker constraint compared to the traditional formulation, only the mean energy bar E is kept fixed between virtual paths. This reformulation of MP alleviates several weaknesses of the old version. The reciprocal Maupertuis principle (RMP) is the classical limit of Schroedinger close-quote s variational principle of quantum mechanics, and this connection emphasizes the importance of the reciprocity transformation for variational principles. Two unconstrained formulations (UHP and UMP) of these four principles are also proposed, with completely specified Lagrange multipliers Percival close-quote s variational principle for invariant tori and variational principles for scattering orbits are derived from the RMP. The RMP is very convenient for approximate variational solutions to problems in mechanics using Ritz type methods Examples are provided. Copyright copyright 1996 Academic Press, Inc

Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene.

Science.gov (United States)

Ye, Long; Zhang, Shaoqing; Huo, Lijun; Zhang, Maojie; Hou, Jianhui

2014-05-20

As researchers continue to develop new organic materials for solar cells, benzo[1,2-b:4,5-b']dithiophene (BDT)-based polymers have come to the fore. To improve the photovoltaic properties of BDT-based polymers, researchers have developed and applied various strategies leading to the successful molecular design of highly efficient photovoltaic polymers. Novel polymer materials composed of two-dimensional conjugated BDT (2D-conjugated BDT) have boosted the power conversion efficiency of polymer solar cells (PSCs) to levels that exceed 9%. In this Account, we summarize recent progress related to the design and synthesis of 2D-conjugated BDT-based polymers and discuss their applications in highly efficient photovoltaic devices. We introduce the basic considerations for the construction of 2D-conjugated BDT-based polymers and systematic molecular design guidelines. For example, simply modifying an alkoxyl-substituted BDT to form an alkylthienyl-substituted BDT can improve the polymer hole mobilities substantially with little effect on their molecular energy level. Secondly, the addition of a variety of chemical moieties to the polymer can produce a 2D-conjugated BDT unit with more functions. For example, the introduction of a conjugated side chain with electron deficient groups (such as para-alkyl-phenyl, meta-alkoxyl-phenyl, and 2-alkyl-3-fluoro-thienyl) allowed us to modulate the molecular energy levels of 2D-conjugated BDT-based polymers. Through the rational design of BDT analogues such as dithienobenzodithiophene (DTBDT) or the insertion of larger π bridges, we can tune the backbone conformations of these polymers and modulate their photovoltaic properties. We also discuss the influence of 2D-conjugated BDT on polymer morphology and the blends of these polymers with phenyl-C61 (or C71)-butyric acid methyl ester (PCBM). Finally, we summarize the various applications of the 2D-conjugated BDT-based polymers in highly efficient PSC devices. Overall, this Account

The photovoltaic ambitious of EDF

International Nuclear Information System (INIS)

Houot, G.

2008-01-01

Added to the wind energy, EDF develops the photovoltaic by its subsidiaries EDF Energies Nouvelles, for the big power plants and EDF Energies Nouvelles Reparties centralized on the market of small installations for roofs. The author analyzes the society management and project concerning the photovoltaic development. (A.L.B.)

Mounting support for a photovoltaic module

Science.gov (United States)

Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

2013-03-26

A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

MPPT Based on Fuzzy Logic Controller (FLC) for Photovoltaic (PV) System in Solar Car

OpenAIRE

Aji, Seno; Ajiatmo, Dwi; Robandi, Imam; Suryoatmojo, Heri

2013-01-01

This paper presents a control called Maximum Power Point Tracking (MPPT) for photovoltaic (PV) system in a solar car. The main purpose of this system is to extracts PV power maximally while keeping small losses using a simple design of converter. Working principle of MPPT based fuzzy logic controller (MPPT-FLC) is to get desirable values of reference current and voltage. MPPT-FLC compares them with the values of the PV's actual current and voltage to control duty cycle value. Then the duty cy...

Bandgap engineering of Cu2CdxZn1−xSnS4 alloy for photovoltaic applications: A complementary experimental and first-principles study

KAUST Repository

Xiao, Zhen-Yu

2013-11-11

We report on bandgap engineering of an emerging photovoltaic material of Cu2CdxZn1-xSnS4 (CCZTS) alloy. CCZTS alloy thin films with different Cd contents and single kesterite phase were fabricated using the sol-gel method. The optical absorption measurements indicate that the bandgap of the kesterite CCZTS alloy can be continuously tuned in a range of 1.55-1.09 eV as Cd content varied from x = 0 to 1. Hall effect measurements suggest that the hole concentration of CCZTS films decreases with increasing Cd content. The CCZTS-based solar cell with x = 0.47 demonstrates a power conversion efficiency of 1.2%. Our first-principles calculations based on the hybrid functional method demonstrate that the bandgap of the kesterite CCZTS alloy decreases monotonically with increasing Cd content, supporting the experimental results. Furthermore, Cu2ZnSnS4/Cu 2CdSnS4 interface has a type-I band-alignment with a small valence-band offset, explaining the narrowing of the bandgap of CCZTS as the Cd content increases. Our results suggest that CCZTS alloy is a potentially suitable material to fabricate high-efficiency multi-junction tandem solar cells with different bandgap-tailored absorption layers. © 2013 AIP Publishing LLC.

A thermoeconomic model of a photovoltaic heat pump

International Nuclear Information System (INIS)

Mastrullo, R.; Renno, C.

2010-01-01

In this paper the model of a heat pump whose evaporator operates as a photovoltaic collector, is studied. The energy balance equations have been used for some heat pump components, and for each layer of the photovoltaic evaporator: covering glaze, photovoltaic modules, thermal absorber plate, refrigerant tube and insulator. The model has been solved by means of a program using proper simplifications. The system input is represented by the solar radiation intensity and the environment temperature, that influence the output electric power of the photovoltaic modules and the evaporation power. The model results have been obtained referring to the photovoltaic evaporator and the plant operating as heat pump, in terms of the photovoltaic evaporator layers temperatures, the refrigerant fluid properties values in the cycle fundamental points, the thermal and mechanical powers, the efficiencies that characterize the plant performances from the energy, exergy and economic point of view. This study allows to realize a thermoeconomic comparison between a photovoltaic heat pump and a traditional heat pump under the same working conditions.

International Photovoltaic Program Plan. Volume II. Appendices

Energy Technology Data Exchange (ETDEWEB)

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-12-01

This second volume of a two-part report on the International Photovoltaic Program Plan contains appendices summarizing the results of analyses conducted in preparation of the plan. These analyses include compilations of relevant statutes and existing Federal programs; strategies designed to expand the use of photovoltaics abroad; information on the domestic photovoltaic plan and its impact on the proposed international plan; perspectives on foreign competition; industry views on the international photovoltaic market and ideas about how US government actions could affect this market; international financing issues; and information on issues affecting foreign policy and developing countries.

Photovoltaics - why this 'religious war'?

International Nuclear Information System (INIS)

Nowak, S.

2005-01-01

This article examines the possible reasons behind controversies concerning photovoltaics in Switzerland. The author, who considers that no other energy technology awakes such varying opinions, presents ten points that should be considered in this connection. These include aspects concerning research and development, trade and industry as well as markets and applications. The 'enormous' potential of photovoltaics and questions concerning availability and environmental issues are discussed. Costs, developments and the question of economic viability are looked at. The situation in Switzerland is compared with international conditions. Finally, political issues are reviewed and the key role to be played by photovoltaics in the future is stressed

Photovoltaic energy generation in Germany

International Nuclear Information System (INIS)

Anon.

1993-01-01

An overview is given of the current state of the art regarding photovoltaic research and demonstration programmes in the Federal Republic of Germany. Also attention is paid to the companies and research institutes involved, and the long-term economical and technical prospects of photovoltaic energy. 13 figs., 4 tabs., 10 refs

Conjugated polymer photovoltaic devices and materials

International Nuclear Information System (INIS)

Mozer, A.J.; Niyazi, Serdar Sariciftci

2006-01-01

The science and technology of conjugated polymer-based photovoltaic devices (bulk heterojunction solar cells) is highlighted focusing on three major issues, i.e. (i) nano-morphology optimization, (ii) improving charge carrier mobility, (iii) improving spectral sensitivity. Successful strategies towards improved photovoltaic performance are presented using various novel materials, including double-cable polymers, regioregular polymers and low bandgap polymers. The examples presented herein demonstrate that the bulk heterojunction concept is a viable approach towards developing photovoltaic systems by inexpensive solution-based fabrication technologies. (authors)

Cost-effective utilisation of basic biochemical laboratory ...

African Journals Online (AJOL)

... of Chemical Pathology, University of KwaZulu-Natal/National Health Laboratory Service (NHLS) ... the basic principles that govern the selection ... issues of quality control and the audit trail of quality assurance in the maintenance of the.

Characterization of phase change materials for thermal control of photovoltaics using Differential Scanning Calorimetry and Temperature History Method

International Nuclear Information System (INIS)

Hasan, A.; McCormack, S.J.; Huang, M.J.; Norton, B.

2014-01-01

Highlights: • Five PCM are characterized using tow techniques for PV temperature regulation. • Thermophysical properties of interest are determined and compared with literature. • Determined PCM properties are discussed as criteria for PV temperature regulation. • One PCM identified as potential candidate for PV temperature regulation. - Abstract: Five solid–liquid phase change materials comprising three basic classes, paraffin waxes, salt hydrates and mixtures of fatty acids were thermophysically characterized for thermal regulation applications in photovoltaics. The PCM were investigated using Differential Scanning Calorimetry and Temperature History Method to find their thermophysical properties of interest. The relationship between thermophysical properties of the PCM and their choice as temperature regulators in photovoltaics is discussed in relation to the ambient conditions under which PV systems operate

Highway renewable energy : photovoltaic noise barriers

Science.gov (United States)

2017-07-01

Highway photovoltaic noise barriers (PVNBs) represent the combination of noise barrier systems and photovoltaic systems in order to mitigate traffic noise while simultaneously producing renewable energy. First deployed in Switzerland in 1989, PVNBs a...

Implementing agreement on photovoltaic power systems - Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2004. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2005. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

The analysis of pricing principles at domestic industrial enterprises

OpenAIRE

I.M. Rjabchenko; V.V. Bozhkova

2013-01-01

The analysis of pricing principles at domestic industrial enterprisesTheoretical and methodological aspects of marketing pricing formation are investigated in the article. The aim of this research is systematization of marketing pricing principles and formation of corresponding offers concerning perfection of a domestic industrial enterprises pricing policy.The results of the analysis. The authors note that pricing principles are important element of pricing methodology which form basic posit...

Production and Characterization of Novel Photovoltaic Materials

Energy Technology Data Exchange (ETDEWEB)

Wu, Marvin [North Carolina Central Univ., Durham, NC (United States)

2016-06-07

This project has three major objectives: exploring the potential nanostructured materials in photovoltaic applications; providing photovoltaic research experiences to NCCU students, who are largely members of underrepresented minority groups; and enhancing the photovoltaic research infrastructure at NCCU to increase faculty and student competitiveness. Significant progress was achieved in each of these areas during the project period, as summarized in this report.

Infrared and Raman spectroscopy: principles and spectral interpretation

National Research Council Canada - National Science Library

Larkin, Peter

2011-01-01

.... The book reviews basic principles, instrumentation, sampling methods, quantitative analysis, origin of group frequencies and qualitative interpretation using generalized Infrared (IR) and Raman spectra...

Photovoltaic programme - edition 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This publication issued by the Swiss Federal Office of Energy's Photovoltaics (PV) Programme presents an overview (in English) of activities and projects in the photovoltaics research and pilot and demonstration area in Switzerland. Progress in the area of future solar cell technologies, modules and building integration, system technologies, planning and operating aids is summarised. Also, PV for applications in developing countries, thermo-photovoltaics and international co-operation are commented on. In the area of pilot and demonstration projects, component development, PV integration in sloping roofs, on flat roofs and noise barriers as well as further PV plant are looked at. Also, measurement campaigns, studies, statistics and further PV-related topics are summarised. This volume also presents the abstracts of reports made by the project managers of 73 research and pilot and demonstration projects in these areas for 2002.

Photovoltaic programme - edition 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This publication issued by the Swiss Federal Office of Energy's Photovoltaics (PV) Programme presents an overview (in English) of activities and projects in the photovoltaics research and pilot and demonstration area in Switzerland. Progress in the area of future solar cell technologies, modules and building integration, system technologies, planning and operating aids is summarised. Also, PV for applications in developing countries, thermo-photovoltaics and international co-operation are commented on. In the area of pilot and demonstration projects, component development, PV integration in sloping roofs, on flat roofs and noise barriers as well as further PV plant are looked at. Also, measurement campaigns, studies, statistics and further PV-related topics are summarised. This volume also presents the abstracts of reports made by the project managers of 73 research and pilot and demonstration projects in these areas for 2002.

The 2009 photovoltaic barometer

International Nuclear Information System (INIS)

Anon.

2010-01-01

The global photovoltaic market expanded again in 2009. Germany set a new system installation record while the capacity build-up of the major solar photovoltaic markets contained the fallout generated by the Iberian market derailment. The European Union has the highest photovoltaic plant capacity, with almost 5.5 GWp installed in 2009. Italy is the third European Union country to pass the symbolic 1000 MWp installed mark, following Germany and Spain. France ranks 6 with 185 MWp installed in 2009. The decrease in the price of silicon reached 80% in 2009. The industry is facing a coming-of-age crisis with prices falling and over-production. Most of the major cell manufacturers are located in Asia. The European industry is still well represented with Q-Cells, the German leading cell manufacturer in addition with hefty industry players. (A.C.)

Porphyrin and fullerene-based artificial photosynthetic materials for photovoltaics

International Nuclear Information System (INIS)

Imahori, Hiroshi; Kashiwagi, Yukiyasu; Hasobe, Taku; Kimura, Makoto; Hanada, Takeshi; Nishimura, Yoshinobu; Yamazaki, Iwao; Araki, Yasuyuki; Ito, Osamu; Fukuzumi, Shunichi

2004-01-01

We have developed artificial photosynthetic systems in which porphyrins and fullerenes are self-assembled as building blocks into nanostructured molecular light-harvesting materials and photovoltaic devices. Multistep electron transfer strategy has been combined with our finding that porphyrin and fullerene systems have small reorganization energies, which are suitable for the construction of light energy conversion systems as well as artificial photosynthetic models. Highly efficient photosynthetic electron transfer reactions have been realized at ITO electrodes modified with self-assembled monolayers of porphyrin oligomers as well as porphyrin-fullerene linked systems. Porphyrin-modified gold nanoclusters have been found to have potential as artificial photosynthetic materials. These results provide basic information for the development of nanostructured artificial photosynthetic systems

Identifying Students' Conceptions of Basic Principles in Sequence Stratigraphy

Science.gov (United States)

Herrera, Juan S.; Riggs, Eric M.

2013-01-01

Sequence stratigraphy is a major research subject in the geosciences academia and the oil industry. However, the geoscience education literature addressing students' understanding of the basic concepts of sequence stratigraphy is relatively thin, and the topic has not been well explored. We conducted an assessment of 27 students' conceptions of…

Photovoltaics: New Policy Challenges for Europe

Directory of Open Access Journals (Sweden)

Luís Alexandre Duque Moreira De Sousa

2013-12-01

Full Text Available During the past decade governments across Europe have set in place a series ofprogrammes to expand investment on grid-connected solar power technology, mostespecially Photovoltaics (PV. Recently most of these programmes have beenrolled back, in face of rapidly declining costs. Using a simple model thisarticle shows that basic PV electricity costs are presently below 0.10 €/kWh inlarge swaths of the continent, entering levels where previously only nuclear andfossil fired electricity where found. Due to the scalable nature of PV, manyhouseholds in Europe are now able to produce their own electricity at a costconsiderably lower that the rates demanded by grid utilities. If governmentsproceed with the complete roll back of fixed electricity rates to PV suppliersthe most likely result is a shift to off-the-grid systems. Long term thistrend presents serious challenges to utilities and traditional electricitysuppliers, putting at stake the traditional electricity market framework.

Photovoltaic sub-cell interconnects

Energy Technology Data Exchange (ETDEWEB)

van Hest, Marinus Franciscus Antonius Maria; Swinger Platt, Heather Anne

2017-05-09

Photovoltaic sub-cell interconnect systems and methods are provided. In one embodiment, a photovoltaic device comprises a thin film stack of layers deposited upon a substrate, wherein the thin film stack layers are subdivided into a plurality of sub-cells interconnected in series by a plurality of electrical interconnection structures; and wherein the plurality of electrical interconnection structures each comprise no more than two scribes that penetrate into the thin film stack layers.

Development of the French Photovoltaic Program

Energy Technology Data Exchange (ETDEWEB)

Brunet, M.

1980-07-01

The French photovoltaic research program is reviewed, listing companies involved. Projections of module and system costs are discussed. French industrial experience in photovoltaics is reviewed and several French systems operating in developing countries are mentioned. (MHR)

Statistical learning methods: Basics, control and performance

Energy Technology Data Exchange (ETDEWEB)

Zimmermann, J. [Max-Planck-Institut fuer Physik, Foehringer Ring 6, 80805 Munich (Germany)]. E-mail: zimmerm@mppmu.mpg.de

2006-04-01

The basics of statistical learning are reviewed with a special emphasis on general principles and problems for all different types of learning methods. Different aspects of controlling these methods in a physically adequate way will be discussed. All principles and guidelines will be exercised on examples for statistical learning methods in high energy and astrophysics. These examples prove in addition that statistical learning methods very often lead to a remarkable performance gain compared to the competing classical algorithms.

Statistical learning methods: Basics, control and performance

International Nuclear Information System (INIS)

Zimmermann, J.

2006-01-01

The basics of statistical learning are reviewed with a special emphasis on general principles and problems for all different types of learning methods. Different aspects of controlling these methods in a physically adequate way will be discussed. All principles and guidelines will be exercised on examples for statistical learning methods in high energy and astrophysics. These examples prove in addition that statistical learning methods very often lead to a remarkable performance gain compared to the competing classical algorithms

Performance evaluation of photovoltaic-thermosyphon system for subtropical climate application

Energy Technology Data Exchange (ETDEWEB)

Chow, T.T.; He, W.; Chan, A.L.S. [Division of Building Science and Technology, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR (China); Ji, J. [Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Anhui (China)

2007-01-15

The rapid development and sales volume of photovoltaic (PV) modules has created a promising business environment in the foreseeable future. However, the current electricity cost from PV is still several times higher than from the conventional power generation. One way to shorten the payback period is to bring in the hybrid photovoltaic-thermal (PVT) technology, which multiplies the energy outputs from the same collector surface area. In this paper, the performance evaluation of a new water-type PVT collector system is presented. The thermal collection making use of the thermosyphon principle eliminates the expense of pumping power. Experimental rigs were successfully built. A dynamic simulation model of the PVT collector system was developed and validated by the experimental measurements, together with two other similar models developed for PV module and solar hot-water collector. These were then used to predict the energy outputs and the payback periods for their applications in the subtropical climate, with Hong Kong as an example. The numerical results show that a payback period of 12 year for the PVT collector system is comparable to the side-by-side system, and is much shorter than the plain PV application. This is a great encouragement in marketing the PVT technology. (author)

Performance evaluation of photovoltaic-thermosyphon system for subtropical climate application

International Nuclear Information System (INIS)

Chow, T.T.; He, W.; Chan, A.L.S.; Ji, J.

2007-01-01

The rapid development and sales volume of photovoltaic (PV) modules has created a promising business environment in the foreseeable future. However, the current electricity cost from PV is still several times higher than from the conventional power generation. One way to shorten the payback period is to bring in the hybrid photovoltaic-thermal (PVT) technology, which multiplies the energy outputs from the same collector surface area. In this paper, the performance evaluation of a new water-type PVT collector system is presented. The thermal collection making use of the thermosyphon principle eliminates the expense of pumping power. Experimental rigs were successfully built. A dynamic simulation model of the PVT collector system was developed and validated by the experimental measurements, together with two other similar models developed for PV module and solar hot-water collector. These were then used to predict the energy outputs and the payback periods for their applications in the subtropical climate, with Hong Kong as an example. The numerical results show that a payback period of 12 year for the PVT collector system is comparable to the side-by-side system, and is much shorter than the plain PV application. This is a great encouragement in marketing the PVT technology. (author)

Photovoltaics as a worldwide energy option: A case study in development strategy

International Nuclear Information System (INIS)

Jones, G.; Pate, R.; Hill, R.

1991-01-01

Renewable energy technologies, such as solar thermal electric, photovoltaics (PV), and wind energy have made significant gains in cost and performance in the past decades. As a result, there have been high expectations on the part of the public for these sources to play a major role in future energy supply, especially as environmental concerns about conventional sources increase. Despite these past gains and high expectations, the global potential of renewable energy technologies still remains largely untapped, principally because of issues of industrialization and user acceptance. There is increasing recognition that government energy programs must incorporate a broader strategy than the traditional basic research role if they are to address these issues. Essential elements of this strategy are affordable technology, a healthy industry, sustained market growth, user acceptance, and equitable policy and financial environments. The US Department of Energy (DOE) programs in solar electric conversion have already started the development of the required broader-based effort. This paper presents the status of that work, utilizing the US National Photovoltaic Program as a case study

The stem-cell application in ischemic heart disease: Basic principles, specifics and practical experience from clinical studies

Directory of Open Access Journals (Sweden)

Banović Marko

2015-01-01

Full Text Available Longer life duration, different clinical presentations of coronary disease, as well as high incidence of comorbidity in patients with ischemic heart disease have led to an increase in the incidence of ischemic heart failure. Despite numerous and new treatment methods that act on different pathophysiological mechanisms that cause heart failure, and whose aim is to slowdown or stop the progression of this devastating disease, morbidity and mortality in these patients remain high. These facts have firstly led to the introduction of the experimental, and then clinical studies with the application of stem cells in patients with ischemic heart disease. Previous studies have shown that the application of stem cells is a feasible and safe method in patients with acute coronary syndrome, as well as in patients with chronic ischemic cardiomyopathy, but the efficacy of these methods in both of the abovementioned clinical syndromes has yet to be established. This review paper outlines the basic principles of treatment of ischemic heart disease with stem cells, as well as the experience and knowledge gained in previous clinical studies.

Price-Efficiency Relationship for Photovoltaic Systems on a Global Basis

Directory of Open Access Journals (Sweden)

Mehmet Sait Cengiz

2015-01-01

Full Text Available Solar energy is the most abundant, useful, efficient, and environmentally friendly source of renewable energy. In addition, in recent years, the capacity of photovoltaic electricity generation systems has increased exponentially throughout the world given an increase in the economic viability and reliability of photovoltaic systems. Moreover, many studies state that photovoltaic power systems will play a key role in electricity generation in the future. When first produced, photovoltaic systems had short lifetimes. Currently, through development, the technology lifecycle of photovoltaic systems has increased to 20–25 years. Studies showed that photovoltaic systems would be broadly used in the future, a conclusion reached by considering the rapidly decreasing cost of photovoltaic systems. Because price analysis is very important for energy marketing, in this study, a review of the cost potential factors on photovoltaic panels is realized and the expected cost potential of photovoltaic systems is examined considering numerous studies.

Non-destructive evaluation of water ingress in photovoltaic modules

Energy Technology Data Exchange (ETDEWEB)

Bora, Mihail; Kotovsky, Jack

2017-03-07

Systems and techniques for non-destructive evaluation of water ingress in photovoltaic modules include and/or are configured to illuminate a photovoltaic module comprising a photovoltaic cell and an encapsulant with at least one beam of light having a wavelength in a range from about 1400 nm to about 2700 nm; capture one or more images of the illuminated photovoltaic module, each image relating to a water content of the photovoltaic module; and determine a water content of the photovoltaic module based on the one or more images. Systems preferably include one or more of a light source, a moving mirror, a focusing lens, a beam splitter, a stationary mirror, an objective lens and an imaging module.

Socioeconomic impact of photovoltaic power at Schuchuli, Arizona

Science.gov (United States)

Bahr, D.; Garrett, B. G.; Chrisman, C.

1980-01-01

The social and economic impact of photovoltaic power on a small, remote native American village is studied. Village history, group life, energy use in general, and the use of photovoltaic-powered appliances are discussed. No significant impacts due to the photovoltaic power system were observed.

Implementing agreement on photovoltaic power systems - Annual report 2000

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2000. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed. Status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the operational performance and design of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, the grid interconnection of building-integrated and other distributed photovoltaic power systems, photovoltaic power systems in the built environment, very large scale photovoltaic power generation systems and the deployment of photovoltaic technologies in developing countries. The status and prospects in the 20 countries participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2001. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed. Status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the operational performance, maintenance and sizing of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, photovoltaic power systems in the built environment, a study on very large scale photovoltaic power generation system and the deployment of photovoltaic technologies in developing countries. The status and prospects in the 20 countries participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. The report is completed with a list of Executive Committee members and Operating Agents.

Core principles of evolutionary medicine

Science.gov (United States)

Grunspan, Daniel Z; Nesse, Randolph M; Barnes, M Elizabeth; Brownell, Sara E

2018-01-01

Abstract Background and objectives Evolutionary medicine is a rapidly growing field that uses the principles of evolutionary biology to better understand, prevent and treat disease, and that uses studies of disease to advance basic knowledge in evolutionary biology. Over-arching principles of evolutionary medicine have been described in publications, but our study is the first to systematically elicit core principles from a diverse panel of experts in evolutionary medicine. These principles should be useful to advance recent recommendations made by The Association of American Medical Colleges and the Howard Hughes Medical Institute to make evolutionary thinking a core competency for pre-medical education. Methodology The Delphi method was used to elicit and validate a list of core principles for evolutionary medicine. The study included four surveys administered in sequence to 56 expert panelists. The initial open-ended survey created a list of possible core principles; the three subsequent surveys winnowed the list and assessed the accuracy and importance of each principle. Results Fourteen core principles elicited at least 80% of the panelists to agree or strongly agree that they were important core principles for evolutionary medicine. These principles over-lapped with concepts discussed in other articles discussing key concepts in evolutionary medicine. Conclusions and implications This set of core principles will be helpful for researchers and instructors in evolutionary medicine. We recommend that evolutionary medicine instructors use the list of core principles to construct learning goals. Evolutionary medicine is a young field, so this list of core principles will likely change as the field develops further. PMID:29493660

Implementing agreement on photovoltaic power systems - Annual report 2008

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2008. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids as well as health and safety activities. The status and prospects in the 23 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2007. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids and PV environmental health and safety activities. The status and prospects in the 22 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2007. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids and PV environmental health and safety activities. The status and prospects in the 22 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2008

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2008. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids as well as health and safety activities. The status and prospects in the 23 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2006

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2006. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications and hybrid systems within mini-grids. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2005. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2004. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

Implementing agreement on photovoltaic power systems - Annual report 2006

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2006. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications and hybrid systems within mini-grids. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

A molecular spin-photovoltaic device.

Science.gov (United States)