WorldWideScience

Sample records for bar code requirements

  1. Blurring in bar code signals

    Science.gov (United States)

    Tang, Hong

    1997-10-01

    When a bar code symbol is passed over a scanner, it is struck across by a fast moving laser beam. The laser light is scattered by the bar code. The total scattered power is modulated by the reflectivity of the bars and spaces in the symbol. A fraction of the scattered light is collected and focused onto a photodetector that converts the light variation into an electronic signal. The electronic signal is then digitized for analysis by a computer. The scanning and detection process can be modeled by a convolution of the laser beam profile and the bar code reflectivity function. The switching between states in the digitized bar code signal, which represents transitions from a space to a bar or vice versa, is determined by a zero-crossing point in the second derivative of the analog signal. The laser profile acts like a smoothing function. It blurs the analog electronic signal. If the width of the laser profile is less than the minimum width of bars and spaces in the bar code reflectivity function, the transition point is not affected by the location of its neighboring edges. If the laser profile is wider than the minimum width in the bar code, the transition point can be shifted due to the locations of its neighboring edges. The behavior of the shift of transition is analyzed here for all cases in a UPC symbol. It is found that the amount of shift in the transition point is almost the same for several different cases within the depth of field of the scanner. The knowledge of the behavior of transition point shift can be used to accurately compensate printing errors in an over-printed bar code. The modulation transfer function (MTF) of bar code scanning is the Fourier transform of the marginal function of the scanning laser beam. The MTF through focus for a scanning system is presented. By using an aperture with central obscuration in the laser focusing system, the high frequency resolution of bar code scanning can be enhanced and the depth of field of the scanner can

  2. Modulation transfer function of bar code scanning

    Science.gov (United States)

    Tang, Hong; Milster, Tom D.

    1998-09-01

    Bar code scanners are ubiquitous in supermarkets. As a bar code is passed over a scanner, a laser beam scans across the bar code. The scattered light is modulated by the reflectivity of the bars and spaces of the bar code. The bar code scanning process can be described as a 1D convolution of the scanning laser profile and the bar code reflectivity function. The modulation transfer function (MTF) of bar code scanning is the Fourier transform of the marginal profile of the laser beam. The properties of the MTF of bar code scanning is similar to that of an incoherent imaging system. Measurements of the MTF of bar code scanning at one focus position are presented. The experimental results are then discussed.

  3. Bar code instrumentation for nuclear safeguards

    International Nuclear Information System (INIS)

    This paper presents a brief overview of the basic principles of bar codes and the equipment used to make and to read bar code labels, and a summary of some of the more important factors that need to be considered in integrating bar codes into an information system

  4. Irradiation test of bar code label

    International Nuclear Information System (INIS)

    The irradiation test of bar code label tagged on radioactive waste container was done to determine the effect of radiation. Low and medium radioactive waste is that below total activity of 4,000Bq/g according to the Korean nuclear law. The irradiation amount to radiate bar code label tagged on radioactive waste container was calculated by MCNP-4b computer code. The nuclide such as Co-60 and Cs-137 was assumed to contribute 50 % of total activity. Real irradiation amount for bar code label was finally calculated by the dimensions of the container and the bar code label. The identification of post and the physical deflection of irradiated bar code label was tested by the bar code reader. The coated bar code label was suitable to use on low and medium radioactive waste container

  5. Optical System Design For High Speed Bar Code Scanning

    Science.gov (United States)

    Hellekson, Ronald; Reddersen, Brad; Campbell, Scott

    1987-04-01

    Spectra-Physics recently introduced the Model 750 SL scanner for use in the European point-of-sale market, to meet the European requirement for a scanner of less than 13 cm height. The model 750 SL uses a higher density computer designed scan pattern with a retrodirective collection system to scan and detect UPC, EAN, and JAN bar codes. The scanner "reads" these bar codes in such a way that the user need not precisely align the bar code symbol with respect to the window in the scanner even at package speeds up to 100 inches per second. By using a unique geometrical arrangement of mirrors, a polygonal mirror assembly, and a custom-designed plastic bifocal lens, a design was developed to meet these requirements. This paper describes the design of this new low cost scanner, the use of computer-aided design in the development of this scanner, and some observations on the future of bar code scanning.

  6. Bar code application to nuclear material accountancy

    International Nuclear Information System (INIS)

    For the purpose of efficient implementation of IAEA safeguards inspection, operators ought to prepare the information which is related to the strata for flow verification in a timely manner, such as physical inventory listing and summary of the fuel bundles. Today the use of bar code technique in tracing of products related data or counting number of items has been more and more applied to many facets of industry. From these points of view, the Japan Nuclear Fuel Company (NF) has been developing JNF Total Bar Code System. Now JNF has established an on-line input system of the fuel bundle accountability data by use of the bar code system to quickly prepare the information necessary for the inspection. As the first step, JNF implemented this bar code system at the flow verification to prepare physical inventory summary and location map of the fuel bundles in the storage. This paper reports that as a result of this, NF confirmed that this bar code system made it possible to input easily and quickly nuclear material accountancy information, and therefore this system is utilized as an effective and efficient measure of timely preparation for the inspection

  7. Bar code usage in nuclear materials accountability

    International Nuclear Information System (INIS)

    The age old method of physically taking an inventory of materials by listing each item's identification number has lived beyond its usefulness. In this age of computerization, which offers the local grocery store a quick, sure, and easy means to inventory, it is time for nuclear materials facilities to automate accountability activities. The Oak Ridge Y-12 Plant began investigating the use of automated data collection devices in 1979. At that time, bar code and optical-character-recognition (OCR) systems were reviewed with the purpose of directly entering data into DYMCAS (Dynamic Special Nuclear Materials Control and Accountability System). Both of these systems appeared applicable; however, other automated devices already employed for production control made implementing the bar code and OCR seem improbable. However, the DYMCAS was placed on line for nuclear material accountability, a decision was made to consider the bar code for physical inventory listings. For the past several months a development program has been underway to use a bar code device to collect and input data to the DYMCAS on the uranium recovery operations. Programs have been completed and tested, and are being employed to ensure that data will be compatible and useful. Bar code implementation and expansion of its use for all nuclear material inventory activity in Y-12 is presented

  8. Bar code usage in nuclear materials accountability

    International Nuclear Information System (INIS)

    The Oak Ridge Y-12 Plant began investigating the use of automated data collection devices in 1979. At this time, bar code and optical-character-recognition (OCR) systems were reviewed with the purpose of directly entering data into DYMCAS (Dynamic Special Nuclear Materials Control and Accountability System). Both of these systems appeared applicable, however, other automated devices already employed for production control made implementing the bar code and OCR seem improbable. However, the DYMCAS was placed on line for nuclear material accountability, a decision was made to consider the bar code for physical inventory listings. For the past several months a development program has been underway to use a bar code device to collect and input data to the DYMCAS on the uranium recovery operations. Programs have been completed and tested, and are being employed to ensure that data will be compatible and useful. Bar code implementation and expansion of its use for all nuclear material inventory activity in Y-12 is presented

  9. BAR-MOM Code and Its Application

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    BAR-MOM [1,2] code to calculate the height of the fission barrier Bf, the energy of the ground state, the compound nucleus stability by limit with respect to fission, i.e., the angular momentum(the spin value) Lmax at which the fission barrier disappears, the three principal axis moments of inertia at saddle point for a certain nucleus with atomic number Z, atomic mass number and angular momentum L for 19BAR-MOM code to include the results for Z≥102[3] by using more recent parameterization of the Thomas Fermi fission

  10. Measuring and test equipment control through bar-code technology

    International Nuclear Information System (INIS)

    Over the past several years, the use, tracking, and documentation of measuring and test equipment (M ampersand TE) has become a major issue. New regulations are forcing companies to develop new policies for providing use history, traceability, and accountability of M ampersand TE. This paper discusses how the Fast Flux Test Facility (FFTF), operated by Westinghouse Hanford Company and located at the Hanford site in Rich- land, Washington, overcame these obstacles by using a computerized system exercising bar-code technology. A data base was developed to identify M ampersand TE containing 33 separate fields, such as manufacturer, model, range, bar-code number, and other pertinent information. A bar-code label was attached to each piece of M ampersand TE. A second data base was created to identify the employee using the M ampersand TE. The fields contained pertinent user information such as name, location, and payroll number. Each employee's payroll number was bar coded and attached to the back of their identification badge. A computer program was developed to automate certain tasks previously performed and tracked by hand. Bar-code technology was combined with this computer program to control the input and distribution of information, eliminate common mistakes, electronically store information, and reduce the time required to check out the M ampersand TE for use

  11. Effects of bar coding on a pharmacy stock replenishment system.

    Science.gov (United States)

    Chester, M I; Zilz, D A

    1989-07-01

    A bar-code stock ordering system installed in the ambulatory-care pharmacy and sterile products area of a hospital pharmacy was compared with a manual paper system to quantify overall time demands and determine the error rate associated with each system. The bar-code system was implemented in the ambulatory-care pharmacy in November 1987 and in the sterile products area in January 1988. It consists of a Trakker 9440 transaction manager with a digital scanner; labels are printed with a dot matrix printer. Electronic scanning of bar-code labels and entry of the amount required using the key-pad on the transaction manager replaced use of a preprinted form for ordering items. With the bar-code system, ordering information is transferred electronically via cable to the pharmacy inventory computer; with the manual system, this information was input by a stockroom technician. To compare the systems, the work of technicians in the ambulatory-care pharmacy and sterile products area was evaluated before and after implementation of the bar-code system. The time requirements for information gathering and data transfer were recorded by direct observation; the prevalence of errors under each system was determined by comparing unprocessed ordering information with the corresponding computer-generated "pick lists" (itemized lists including the amount of each product ordered). Time consumed in extra trips to the stockroom to replace out-of-stock items was self-reported. Significantly less time was required to order stock and transfer data to the pharmacy inventory computer with the bar-code system than with the manual system.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2757044

  12. Bar-code automated waste tracking system

    International Nuclear Information System (INIS)

    The Bar-Code Automated Waste Tracking System was designed to be a site-Specific program with a general purpose application for transportability to other facilities. The system is user-friendly, totally automated, and incorporates the use of a drive-up window that is close to the areas dealing in container preparation, delivery, pickup, and disposal. The system features ''stop-and-go'' operation rather than a long, tedious, error-prone manual entry. The system is designed for automation but allows operators to concentrate on proper handling of waste while maintaining manual entry of data as a backup. A large wall plaque filled with bar-code labels is used to input specific details about any movement of waste

  13. Bar-code automated waste tracking system

    Energy Technology Data Exchange (ETDEWEB)

    Hull, T.E.

    1994-10-01

    The Bar-Code Automated Waste Tracking System was designed to be a site-Specific program with a general purpose application for transportability to other facilities. The system is user-friendly, totally automated, and incorporates the use of a drive-up window that is close to the areas dealing in container preparation, delivery, pickup, and disposal. The system features ``stop-and-go`` operation rather than a long, tedious, error-prone manual entry. The system is designed for automation but allows operators to concentrate on proper handling of waste while maintaining manual entry of data as a backup. A large wall plaque filled with bar-code labels is used to input specific details about any movement of waste.

  14. BAR-MOM code and its application

    International Nuclear Information System (INIS)

    BAR-MOM code for calculating the height of the fission barrier Bf , the energy of the ground state is presented; the compound nucleus stability by limit with respect to fission, i.e., the angular momentum (the spin value) Lmax at which the fission barrier disappears, the three principal axis moments of inertia at saddle point for a certain nucleus with atomic number Z, atomic mass number A and angular momentum L in units of ℎ for 19< Z<102, and the model used are introduced briefly. The generalized BAR-MOM code to include the results for Z ≥ 102 by using more recent parameterization of the Thomas Fermi fission barrier is also introduced briefly. We have learned the models used in Code BAR-MOM, and run it successfully and correctly for a certain nucleus with atomic mass number A, atomic number Z, and angular momentum L on PC by Fortran-90. The testing calculation values to check the implementation of the program show that the results of the present work are in good agreement with the original one

  15. Applications of bar code technology at nuclear power plants

    International Nuclear Information System (INIS)

    Bar code is an emerging technology that can eliminate handwritten and keyboard data-entry errors. With application-specific software, bar code technology can provide inventory control, reducing staff time and paperwork. This paper summarizes bar code technology, describes hardware commercially available, and reviews application software systems for use in nuclear power plants

  16. System analysis of bar code laser scanner

    Science.gov (United States)

    Wang, Jianpu; Chen, Zhaofeng; Lu, Zukang

    1996-10-01

    This paper focuses on realizing the three important aspects of bar code scanner: generating a high quality scanning light beam, acquiring a fairly even distribution characteristic of light collection, achieving a low signal dynamic range over a large depth of field. To do this, we analyze the spatial distribution and propagation characteristics of scanning laser beam, the vignetting characteristic of optical collection system and their respective optimal design; propose a novel optical automatic gain control method to attain a constant collection over a large working depth.

  17. Bar coded air sample tracking and bar coded loose surface contamination sample tracking: How it can assist in compliance with the DOE's new 10 CFR 835 and the NRC's new 10 CFR 20 regulations

    International Nuclear Information System (INIS)

    The paper describes advance sample tracking and processing techniques which utilize bar code technology for field data collection and count room analysis. Techniques described by the paper include bar coded area air sampling, bar coded portable breathing zone air sampling, and bar coded loose surface contamination sampling. Bar coded sample tracking is explored to demonstrate how it can assist in compliance with new DOE 10 CFR 835 and NRC 10 CFR 20 requirements. Operation of portable bar code readers is explored to provide insight to the advantages of bar coded sample tracking and corresponding sample trending analyses. Case studies involving bar coded sample tracking systems which are in use at NRC facilities, DOE sites, and decommission projects are discussed

  18. The application of bar coding technology at WIPP

    International Nuclear Information System (INIS)

    Bar coding at the Waste Isolation Pilot Plant (WIPP) can be used to track waste containers within the facility, control transuranic (TRU) waste inventory flow, and reduce manpower and error in recording package identification or control parameters. By choosing where and when to bar code, precise timelines or time-and-motion studies can be conducted to aid in streamlining waste handling throughput at WIPP. Additionally, the use of bar codes as waste container identification (ID) numbers increases the accuracy of recording the ID numbers by four orders of magnitude. The bar code label can also be utilized for other functions, such as shipping labels. Also, the bar code is integrated with the waste management data base such that the entire data base can be accessed on a computer using a bar code

  19. Contrast and Comparison Between the Old and New Bar Code for Commodity Management Measures

    Institute of Scientific and Technical Information of China (English)

    Huang Xiaolin; Ma Jing

    2005-01-01

    @@ With the development of socialism market economy, the former Bar Code For Commodity Management Measures (being called Old Measures for short hereafter) issued by the National Bureau of Quality and Technical Supervision can not adapt to the requirement of managing for bar code for commodity.

  20. Monitoring the laser marking of a bar code label

    International Nuclear Information System (INIS)

    A bar code label which has been laser marked onto the end of a nuclear fuel tube is tested for unacceptable depth penetration of the heat affected zone. The average gray level value of the bar code label is compared with a predetermined standard. The label is optically sensed by a video camera and a set of discrete digital values representative of the bar code label is generated. The average digital value representative of the bar code label is calculated and compared to a predetermined standard level derived from measurements of acceptable laser marked tubes. (author)

  1. Bar-code technology applied to drug-use evaluation.

    Science.gov (United States)

    Zarowitz, B J; Petitta, A; Mlynarek, M; Touchette, M; Peters, M; Long, P; Patel, R

    1993-05-01

    Bar-code technology was used to determine: (1) patterns in histamine H2-receptor antagonist use and (2) the occurrence of adverse drug effects and drug interactions associated with the use of these agents in critically ill patients. Patients at Henry Ford Hospital (Detroit) receiving histamine H2-receptor antagonists over a two-month period were evaluated. Clinical information was collected in the intensive care units by using a bar-code system. The data-capture menu was based on drug-use-evaluation criteria for H2-receptor antagonists. Data collected in the scanning wands were uploaded into a computer database and were analyzed at the end of the study. Data were collected for 207 patients. Cimetidine was the predominant H2-receptor antagonist used, and the predominant indication was stress-ulcer prophylaxis. Dosing trends followed accepted guidelines for cimetidine dosage adjustment in renal and hepatic failure. Two drug interactions and six adverse drug reactions occurred. Pharmacists made 92 recommendations to the medical staff regarding modification in therapy, involving 32% of the patients. Data collection required an average of 10 minutes per day each for three pharmacists. H2-receptor antagonist use patterns were evaluated in intensive care units through the application of bar-code technology. The speed and efficiency of this automated tool facilitated collection of a large amount of data. PMID:8099468

  2. Bar code technology improves positive patient identification and transfusion safety.

    Science.gov (United States)

    Sandler, S G; Langeberg, A; Dohnalek, L

    2005-01-01

    As a result of human error, an estimated 1 in 12,000 blood transfusions is given to the wrong patient. The cause of nearly all of these errors is failure of hospital personnel to identify positively intended transfusion recipients, their blood samples for cross-matching, or their correct blood components. We describe our experience using a point-of-care bar code transfusion safety system that links patients' bar-coded wristbands, with bar-coded labels on blood sample tubes, blood component bags, and nurses' identification badges. The result was 100 % accuracy of matching patients, their blood samples, and components for transfusions. For verifying information before starting blood transfusions, nurses preferred bar code "double checks" to conventional visual "double checks" by a second nurse. Methods are needed to reinforce nurses' proficiency with technological approaches to transfusion safety, such as software-driven bar code scanning, in situations where transfusions are administered infrequently. PMID:16050151

  3. Application of laser bar code technology in power fitting evaluation

    Science.gov (United States)

    Yang, Xiaohong; Liu, Shuhuab

    2007-12-01

    In this work, an automatic encoding and management system on power fittings (PFEMS) is developed based on laser bar coding technology. The system can encode power fittings according to their types, structure, dimensions, materials, and technical characteristics. Both the character codes and the laser bar codes of power fittings can be produced from the system. The system can evaluate power fittings and search process-paper automatically. The system analyzes the historical values and technical information of congeneric fittings, and forms formulae of evaluation with recursive analytical method. And then stores the formulae and technical documents into the database for index. Scanning the bar code with a laser bar code reader, accurate evaluation and corresponding process-paper of the fittings can be produced. The software has already been applied in some power stations and worked very well.

  4. A bar-code reader for an alpha-beta automatic counting system - FAG

    International Nuclear Information System (INIS)

    A bar-code laser system for sample number reading was integrated into the FAG Alpha-Beta automatic counting system. The sample identification by means of an attached bar-code label enables unmistakable and reliable attribution of results to the counted sample. Installation of the bar-code reader system required several modifications: Mechanical changes in the automatic sample changer, design and production of new sample holders, modification of the sample planchettes, changes in the electronic system, update of the operating software of the system (authors)

  5. Application bar-code system for solid radioactive waste management

    International Nuclear Information System (INIS)

    Solid radioactive wastes are generated from the post-irradiated fuel examination facility, the irradiated material examination facility, the research reactor, and the laboratories at KAERI. A bar-code system for a solid radioactive waste management of a research organization became necessary while developing the RAWMIS(Radioactive Waste Management Integration System) which it can generate personal history management for efficient management of a waste, documents, all kinds of statistics. This paper introduces an input and output application program design to do to database with data in the results and a stream process of a treatment that analyzed the waste occurrence present situation and data by bar-code system

  6. CERN access card: Introduction of a bar code

    CERN Multimedia

    Relations with the Host States Service

    2004-01-01

    Before the latest version of the implementation measures relating to Operational Circular No. 2 comes into force, we would like to inform you that, in future, CERN access cards may bear a bar code to transcribe the holder's identification number. Relations with the Host States Service http://www.cern.ch/relations/ Tel. 72848

  7. CERN access cards - Introduction of a bar code (Reminder)

    CERN Multimedia

    Relations with the Host States Service

    2004-01-01

    In accordance with the latest revised version of the implementation measures relating to Operational Circular No. 2, CERN access cards may bear a bar code transcribing the holder's identification number (the revised version of this subsidiary document to the aforementioned Circular will be published shortly). Relations with the Host States Service http://www.cern.ch/relations/ relations.secretariat@cern.ch Tel. 72848

  8. Challenges implementing bar-coded medication administration in the emergency room in comparison to medical surgical units.

    Science.gov (United States)

    Glover, Nancy

    2013-03-01

    Bar-coded medication administration has been successfully implemented and utilized to decrease medication errors at a number of hospitals in recent years. The purpose of this article was to discuss the varying success in utilization of bar-coded medication administration on medical-surgical units and in the emergency department. Utilization reports were analyzed to better understand the challenges between the units. Many factors negatively impacted utilization in the emergency department, including the inability to use bar-coded medication administration for verbal orders or to document medications distributed by the prescribing providers, unique aspects of emergency department nursing workflow, additional steps to chart when using bar-coded medication administration, and alert fatigue. Hardware problems affected all users. Bar-coded medication administration in its current form is more suitable for use on medical-surgical floors than in the emergency department. New solutions should be developed for bar-coded medication administration in the emergency department, keeping in mind requirements to chart medications when there is no order in the system, document medications distributed by prescribing providers, adapt to unpredictable nursing workflow, minimize steps to chart with bar-coded medication administration, limit alerts to those that are clinically meaningful, and choose reliable hardware with adequate bar-code scanning capability. PMID:23321481

  9. Integrating bar-code devices with computerized MC and A systems

    International Nuclear Information System (INIS)

    Over the past seven years, Los Alamos National Laboratory developed several generations of computerized nuclear materials control and accountability (MC and A) systems for tracking and reporting the storage, movement, and management of nuclear materials at domestic and international facilities. During the same period, Oak Ridge National Laboratory was involved with automated data acquisition (ADA) equipment, including installation of numerous bar-code scanning stations at various facilities to serve as input devices to computerized systems. Bar-code readers, as well as other ADA devices, reduce input errors, provide faster input, and allow the capture of data in remote areas where workstations do not exist. Los Alamos National Laboratory and Oak Ridge National Laboratory teamed together to implement the integration of bar-code hardware technology with computerized MC and A systems. With the expertise of both sites, the two technologies were successfully merged with little difficulty. Bar-code input is now available with several functions of the MC and A systems: material movements within material balance areas (MBAs), material movements between MBAs, and physical inventory verification. This paper describes the various components required for the integration of these MC and A systems with the installed bar-code reader devices and the future directions for these technologies

  10. Management of manufacture and installation of plant pipings by bar code system

    International Nuclear Information System (INIS)

    As for the piping system of nuclear power plants, the number of parts is very large, and the mill sheet is attached to each part, therefore, it is necessary to manage them individually, and large man power is required. In order to resolve the delay of mechanization in the factory, bar code system was adopted on full scale. At the time of taking parts out from the store, bar code labels are stuck to all piping parts. By this means, all the processes of manufacture and inspection are managed with a computer, and it is useful for labor saving and the prevention of mistaken input. This system is centering around the system of the progress management for piping manufacture, and is operated by being coupled with respective systems of production design, order and inventory, mill sheet management and installation management. The management of production design, manufacture, inspection and installation is explained. There is the problem of sticking bar code labels again as the labels become dirty or parts pass through coating and pickling processes. The direct carving of bar codes on parts by laser marker was tried, and it was successful for stainless steel, but in carbon steel pipes, it was hard to read. It is desirable to develop the bar codes which endure until the end of plant life. (K.I.)

  11. MOEM scan engine for bar code reading and factory automation

    Science.gov (United States)

    Motamedi, M. Edward; Park, Sangtae; Melendes, Robert; Wang, A.; Andrews, Angus P.; Garcia-Nunez, Dawn S.; Jinar, Dan; Richardson, Patti D.; Studer, J.; Chen, J. K.; DeNatale, Jeffrey F.; Moranski, Jeffrey A.

    1998-03-01

    Rockwell is in the state of technology transfer to manufacturing of a micro-opto-electro-mechanical scan engine with superior scanning performance for bar code reading and factory automation. The scan engine consists of three main components: actuator, mirrors, and control electronics. The first two components are fabricated on a silicon cantilever beam while the control electronics are presently hybrid. The actuator comprises of a bimorph layer covered with two metal layers. The mirror has a large area (several mm2) and it is micromachined with a surface flatness better than (lambda) /2. Actuator scan-angles greater than 22 degree(s) with high repeatability in performance are achieved. The scan engine was integrated with an existing Rockwell commercial bar code reader/decoder and successfully proven to read a two-character code 39 bar code. The system was capable of decoding the 13-mil label at 360 scans per second with a 100% successful read performance. Environmental testing of the device indicates that the scanner can operate at elevated temperatures up to 70 degree(s)C with minor fluctuations in frequency and scan angle. The scanner has also gone through a lifetime cycle test and it has survived more than 8 billion cycles during a period of 18 months. To increase the yield and the performance level of the device, theoretical study as well as dynamic simulation by finite elements modeling have been investigated and will be reported separately.

  12. Improving radiopharmaceutical supply chain safety by implementing bar code technology.

    Science.gov (United States)

    Matanza, David; Hallouard, François; Rioufol, Catherine; Fessi, Hatem; Fraysse, Marc

    2014-11-01

    The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management. PMID:25144560

  13. Denture bar-coding: An innovative technique in forensic dentistry

    OpenAIRE

    Dineshshankar, Janardhanam; Venkateshwaran, Rajendran; J. Vidhya; Anuradha, R.; Mary, Gold Pealin; Pradeep, R.; Senthileagappan, A. R.

    2015-01-01

    Denture markers play an important role in forensic odontology and also in identifying a person. A number of methods are there for identifying dentures from a less expensive technique to a more expensive technique. Out of different denture markers, the bar-coding system is a way of collecting data from the mobile. Even a huge amount of data can be stored in that. It can be easily incorporated during acrylization of the denture and thus could be helpful in identification. This article reviews t...

  14. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony

    2013-01-01

    International audience Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar a...

  15. Effects Of Substrate Scattering On Bar-Code Scanning Signals

    Science.gov (United States)

    Barkan, Eric; Sklar, David

    1983-04-01

    When a beam of light strikes a piece of paper or similar substrate, a portion of its energy penetrates into the bulk and, due to multiple scattering, may re-emerge at some distance from the point of entry. We refer to this phenomenon as substrate scattering. In this paper we describe a general model for scattering substrates and, using linear systems theory, we investigate its implications for bar-code scanning. We show that the effects of substrate scattering can be represented as a modified reflectance distribution associated with the original printed reflectance pattern. This effective distribution is shown to be independent of the details of scanning system configuration. We show that under a broad range of conditions substrate scattering will decrease modulation and will cause scanners to overestimate barwidths. A specific diffusion model of the scattering process is developed, providing a family of functions which can be used in empirical studies. We conclude that the scattering distributions will not even be approximately Gaussian. Experimental results are presented which are consistent with this conclusion and inconsistent with a Gaussian model. Further experimental results are presented which show that, for typical substrates, depth of modulation may be decreased by 20 percent or more and perceived bar-width increases will be on the order of one mil.

  16. System Design Considerations In Bar-Code Laser Scanning

    Science.gov (United States)

    Barkan, Eric; Swartz, Jerome

    1984-08-01

    The unified transfer function approach to the design of laser barcode scanner signal acquisition hardware is considered. The treatment of seemingly disparate system areas such as the optical train, the scanning spot, the electrical filter circuits, the effects of noise, and printing errors is presented using linear systems theory. Such important issues as determination of depth of modulation, filter specification, tolerancing of optical components, and optimi-zation of system performance in the presence of noise are discussed. The concept of effective spot size to allow for impact of optical system and analog processing circuitry upon depth of modulation is introduced. Considerations are limited primarily to Gaussian spot profiles, but also apply to more general cases. Attention is paid to realistic bar-code symbol models and to implications with respect to printing tolerances.

  17. Modeling And Simulation Of Bar Code Scanners Using Computer Aided Design Software

    Science.gov (United States)

    Hellekson, Ron; Campbell, Scott

    1988-06-01

    Many optical systems have demanding requirements to package the system in a small 3 dimensional space. The use of computer graphic tools can be a tremendous aid to the designer in analyzing the optical problems created by smaller and less costly systems. The Spectra Physics grocery store bar code scanner employs an especially complex 3 dimensional scan pattern to read bar code labels. By using a specially written program which interfaces with a computer aided design system, we have simulated many of the functions of this complex optical system. In this paper we will illustrate how a recent version of the scanner has been designed. We will discuss the use of computer graphics in the design process including interactive tweaking of the scan pattern, analysis of collected light, analysis of the scan pattern density, and analysis of the manufacturing tolerances used to build the scanner.

  18. Machine-vision-based bar code scanning for long-range applications

    Science.gov (United States)

    Banta, Larry E.; Pertl, Franz A.; Rosenecker, Charles; Rosenberry-Friend, Kimberly A.

    1998-10-01

    Bar code labeling of products has become almost universal in most industries. However, in the steel industry, problems with high temperatures, harsh physical environments and the large sizes of the products and material handling equipment have slowed implementation of bar code based systems in the hot end of the mill. Typical laser-based bar code scanners have maximum scan distances of only 15 feet or so. Longer distance models have been developed which require the use of retro reflective paper labels, but the labels must be very large, are expensive, and cannot stand the heat and physical abuse of the steel mill environment. Furthermore, it is often difficult to accurately point a hand held scanner at targets in bright sunlight or at long distances. An automated product tag reading system based on CCD cameras and computer image processing has been developed by West Virginia University, and demonstrated at the Weirton Steel Corporation. The system performs both the pointing and reading functions. A video camera is mounted on a pan/tilt head, and connected to a personal computer through a frame grabber board. The computer analyzes the images, and can identify product ID tags in a wide-angle scene. It controls the camera to point at each tag and zoom for a closeup picture. The closeups are analyzed and the program need both a barcode and the corresponding alphanumeric code on the tag. This paper describes the camera pointing and bar-code reading functions of the algorithm. A companion paper describes the OCR functions.

  19. 19 CFR 142.45 - Use of bar code by entry filer.

    Science.gov (United States)

    2010-04-01

    ... filer and a product description below the bar code. (b) Multiple commodity processing. Multiple... variable allowed. The commodities should be listed on one invoice with C-4 Code labels for each...

  20. Nurses' Attitudes Toward the Use of the Bar-coding Medication Administration System

    NARCIS (Netherlands)

    S.D. Marini; A. Hasman; H.A.S. Huijer; H. Dimassi

    2010-01-01

    This study determines nurses' attitudes toward bar-coding medication administration system use. Some of the factors underlying the successful use of bar-coding medication administration systems that are viewed as a connotative indicator of users' attitudes were used to gather data that describe the

  1. PCR-free quantitative detection of genetically modified organism from raw materials. An electrochemiluminescence-based bio bar code method.

    Science.gov (United States)

    Zhu, Debin; Tang, Yabing; Xing, Da; Chen, Wei R

    2008-05-15

    A bio bar code assay based on oligonucleotide-modified gold nanoparticles (Au-NPs) provides a PCR-free method for quantitative detection of nucleic acid targets. However, the current bio bar code assay requires lengthy experimental procedures including the preparation and release of bar code DNA probes from the target-nanoparticle complex and immobilization and hybridization of the probes for quantification. Herein, we report a novel PCR-free electrochemiluminescence (ECL)-based bio bar code assay for the quantitative detection of genetically modified organism (GMO) from raw materials. It consists of tris-(2,2'-bipyridyl) ruthenium (TBR)-labeled bar code DNA, nucleic acid hybridization using Au-NPs and biotin-labeled probes, and selective capture of the hybridization complex by streptavidin-coated paramagnetic beads. The detection of target DNA is realized by direct measurement of ECL emission of TBR. It can quantitatively detect target nucleic acids with high speed and sensitivity. This method can be used to quantitatively detect GMO fragments from real GMO products.

  2. Deblurring, Localization and Geometry Correction of 2D QR Bar Codes Using Richardson Lucy Method

    OpenAIRE

    Manpreet Kaur; Amandeep Singh Bhandari

    2014-01-01

    This paper includes the recognition of 2D QR bar codes. This paper describes the deblurring, localization and geometry correction of 2D QR bar codes. The images captured are blurred due motion between the image and the camera. Hence the image containing the QR barcode cannot be read by QR reader. To make the QR barcode readable the images are need to be deblurred. Lucy Richardson method and Weiner Deconvolution Method is used to deblurr and localize the bar code. From both of ...

  3. A new magnetic bar code system based on a magnetic anisotropy detection (abstract)

    Science.gov (United States)

    Sasada, I.; Watanabe, N.

    1996-04-01

    Magnetic bar codes can be used in unclean environments, where widely used optical bar code systems cannot be applied. Readout system for magnetic bar codes can also be made much simpler than optical ones. A new magnetic bar code system is proposed, in which binary information is coded in the sign of tilted angles of magnetic strips from a given standard direction. This scheme is unique compared to the conventional optical bar code, where width or space of the parallel pattern carries information, or an already reported magnetic bar code, where cross sectional shapes of pattern engraved in a ferromagnetic body carries information. Each of the magnetic strips brings about magnetic anisotropy due to its shape effect, hence angular dependent permeability in the proximity of the strip. The sign of the tilted angle of each magnetic strip is detected inductively through the angular dependent permeability by using a magnetic pickup head with a pair of cross-coupled figure-eight coils, where the sign of mutual inductance between the primary and the secondary figure-eight coil has one to one relationship to the sign of the tilted angle. Because the detection of the tilted angle is independent of scanning speed, variation in the scanning speed of the readout head does not affect the performance. In our preliminary study, the proposed magnetic bar code system was examined using pickup head consisting of a pair of cross-coupled 10-turn figure-eight coils which was embedded in a rectangular ferrite rod with cross-shape groove on the top surface of 6.5×3 mm dimension. The head was made thinner in the scanning direction to allow dense alignment of the pattern. Two kinds of pattern were made: the one was by aligning short amorphous wires (5 mm in length and 120 μm in diameter) on the plastic film and the other by using a thin (10 μm in thickness) copper film with tilted slits backed by an amorphous ribbon. These samples of magnetic bar code patterns were scanned with lift-off of

  4. Deblurring, Localization and Geometry Correction of 2D QR Bar Codes Using Richardson Lucy Method

    Directory of Open Access Journals (Sweden)

    Manpreet Kaur

    2014-09-01

    Full Text Available This paper includes the recognition of 2D QR bar codes. This paper describes the deblurring, localization and geometry correction of 2D QR bar codes. The images captured are blurred due motion between the image and the camera. Hence the image containing the QR barcode cannot be read by QR reader. To make the QR barcode readable the images are need to be deblurred. Lucy Richardson method and Weiner Deconvolution Method is used to deblurr and localize the bar code. From both of the methods Lucy Richardson Method is best because this method takes less time for execution than the other method. Simulink Model is used for the Geometry correction of the QR bar code. In future, we would like to investigate the generalization of our algorithm to handle more complicated motion blur.

  5. Application of bar codes to the automation of analytical sample data collection

    International Nuclear Information System (INIS)

    The Health Protection Department at the Savannah River Plant collects 500 urine samples per day for tritium analyses. Prior to automation, all sample information was compiled manually. Bar code technology was chosen for automating this program because it provides a more accurate, efficient, and inexpensive method for data entry. The system has three major functions: sample labeling is accomplished at remote bar code label stations composed of an Intermec 8220 (Intermec Corp.) interfaced to an IBM-PC, data collection is done on a central VAX 11/730 (Digital Equipment Corp.). Bar code readers are used to log-in samples to be analyzed on liquid scintillation counters. The VAX 11/730 processes the data and generates reports, data storage is on the VAX 11/730 and backed up on the plant's central computer. A brief description of several other bar code applications at the Savannah River Plant is also presented

  6. Study of nurse workarounds in a hospital using bar code medication administration system.

    Science.gov (United States)

    Rack, Laurie L; Dudjak, Linda A; Wolf, Gail A

    2012-01-01

    This study analyzed registered nurse workarounds in an academic medical center using bar code medication administration technology. Nurse focus groups and a survey were used to determine the frequency and potential causes of workarounds. More than half of the nurses surveyed indicated that they administered medications without scanning the patient or medications during the last shift worked. Benefits of this study include considerations when implementing bar code medication administration technology that may minimize the development of these workarounds in practice. PMID:22202186

  7. Speckle revisited: analysis of speckle noise in bar-code scanning systems

    Science.gov (United States)

    Marom, Emanuel; Kresic-Juric, Sasa; Bergstein, Leonard

    2001-06-01

    Laser beams used for bar-code scanning exhibit speckle noise generated by the roughness of the surface on which bar-codes are printed. Statistical properties of a photodetector signal that integrates a time-varying speckle pattern falling on its aperture are analyzed in detail. We derive simple closed form expressions for the auto-correlation function and power spectral density of the detector current for general form scanning beams with arbitrary field distributions. Theoretical calculations are illustrated by numerical simulations.

  8. A simple and inexpensive bar-coding technique for denture identification

    Directory of Open Access Journals (Sweden)

    Sonali N Nalawade

    2011-01-01

    Full Text Available A number of commercial methods for identifying dentures are available. They can be either invasive or noninvasive techniques. The less sophisticated procedures include simple engraving with bur, and more sophisticated procedures use labels or chips. Bar coding system is a way of transferring data to the computer and huge data can be stored as a record. Bar coding can be easily incorporated during acrylization of the denture and thus could be used in individual identification.

  9. Analysis of Edge Detection in Bar Code Symbols: An Overview and Open Problems

    OpenAIRE

    Saša Krešić-Jurić

    2012-01-01

    Accurate edge localization is essential in bar code decoding. Since speckle noise is the most dominant form of noise in laser bar code scanners, it is important to fully understand its effects on edge detection. Starting with the basic statistical properties of speckle patterns, we present stochastic analysis of speckle noise. We derive the autocorrelation function and power spectral density (PSD) of the noise in terms of intensity distribution of the scanning beam. We then ...

  10. The application of PDA and 2D bar code in material fuel storage management system

    International Nuclear Information System (INIS)

    This paper extends a management system based on PDA and 2D bar code technology, system design and solutions concerned with domestic transfer, storehouse entry and setting, transfer among storehouses, physical inventory are described as well. The system fits business processes well and optimizes data acquisition and processing effectively by u sing the following key technologies: bar code material and paste stand under radioactive conditions, two dimensional storage space emulation, information cascade protection. (authors)

  11. Analysis of Edge Detection in Bar Code Symbols: An Overview and Open Problems

    Directory of Open Access Journals (Sweden)

    Saša Krešić-Jurić

    2012-01-01

    Full Text Available Accurate edge localization is essential in bar code decoding. Since speckle noise is the most dominant form of noise in laser bar code scanners, it is important to fully understand its effects on edge detection. Starting with the basic statistical properties of speckle patterns, we present stochastic analysis of speckle noise. We derive the autocorrelation function and power spectral density (PSD of the noise in terms of intensity distribution of the scanning beam. We then study the signal-to-noise ratio for signals that result from scanning different configurations of edges. Next, we consider statistical properties of edge localization error caused by speckle noise. We show that the standard deviation of the error is determined by the PSD of the noise and relative positions of edges in a bar code symbol. Based on the analysis presented here, we propose new criteria for system design.

  12. Using bar codes to manage radwaste in a nuclear power facility

    International Nuclear Information System (INIS)

    Maintaining accountability, and tracking the location of radioactive waste, has been simplified through the use of bar codes at the Peach Bottom and Limerick Power Plants. A system has been developed which utilizes portable, programmable bar code readers and a microcomputer to collect and report pertinent data on the generation and location of radwaste in the plant. The system, which was customized for each plant, was designed to collect data at the work place through the use of the portable bar code readers and menu cards. The program was designed in a modular format for easy modification and expansion and the system has been adapted for the tracking of equipment, tools, instruments, and respirators. The benefit from this inventory management system is more timely and accurate information for the control of radwaste generation, handling, storage, and shipping. The improved control has resulted in more efficient, cost effective radwaste operations, reduced radiation exposure to personnel, and a cleaner, more orderly plant

  13. Overcoming barriers to the implementation of a pharmacy bar code scanning system for medication dispensing: a case study.

    Science.gov (United States)

    Nanji, Karen C; Cina, Jennifer; Patel, Nirali; Churchill, William; Gandhi, Tejal K; Poon, Eric G

    2009-01-01

    Technology has great potential to reduce medication errors in hospitals. This case report describes barriers to, and facilitators of, the implementation of a pharmacy bar code scanning system to reduce medication dispensing errors at a large academic medical center. Ten pharmacy staff were interviewed about their experiences during the implementation. Interview notes were iteratively reviewed to identify common themes. The authors identified three main barriers to pharmacy bar code scanning system implementation: process (training requirements and process flow issues), technology (hardware, software, and the role of vendors), and resistance (communication issues, changing roles, and negative perceptions about technology). The authors also identified strategies to overcome these barriers. Adequate training, continuous improvement, and adaptation of workflow to address one's own needs mitigated process barriers. Ongoing vendor involvement, acknowledgment of technology limitations, and attempts to address them were crucial in overcoming technology barriers. Staff resistance was addressed through clear communication, identifying champions, emphasizing new information provided by the system, and facilitating collaboration. PMID:19567797

  14. Verification of Advective Bar Elements Implemented in the Aria Thermal Response Code.

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Brantley [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    A verification effort was undertaken to evaluate the implementation of the new advective bar capability in the Aria thermal response code. Several approaches to the verification process were taken : a mesh refinement study to demonstrate solution convergence in the fluid and the solid, visually examining the mapping of the advective bar element nodes to the surrounding surfaces, and a comparison of solutions produced using the advective bars for simple geometries with solutions from commercial CFD software . The mesh refinement study has shown solution convergence for simple pipe flow in both temperature and velocity . Guidelines were provided to achieve appropriate meshes between the advective bar elements and the surrounding volume. Simulations of pipe flow using advective bars elements in Aria have been compared to simulations using the commercial CFD software ANSYS Fluent (r) and provided comparable solutions in temperature and velocity supporting proper implementation of the new capability. Verification of Advective Bar Elements iv Acknowledgements A special thanks goes to Dean Dobranich for his guidance and expertise through all stages of this effort . His advice and feedback was instrumental to its completion. Thanks also goes to Sam Subia and Tolu Okusanya for helping to plan many of the verification activities performed in this document. Thank you to Sam, Justin Lamb and Victor Brunini for their assistance in resolving issues encountered with running the advective bar element model. Finally, thanks goes to Dean, Sam, and Adam Hetzler for reviewing the document and providing very valuable comments.

  15. 76 FR 66235 - Bar Code Technologies for Drugs and Biological Products; Retrospective Review Under Executive...

    Science.gov (United States)

    2011-10-26

    ... technology adoption have proceeded since 2004 had the Bar Code Final Rule not gone into effect? 11. What are hospitals' and other health-care facilities' forecasts for technology adoption once incentives in the...'' (76 FR 3821). One of the provisions in the new Executive order is the affirmation of...

  16. Method and apparatus for reading lased bar codes on shiny-finished fuel rod cladding tubes

    International Nuclear Information System (INIS)

    This patent describes, in a nuclear fuel rod identification system, a method of reading a bar code etched directly on a surface of a nuclear fuel rod. It comprises: defining a pair of light diffuser surfaces adjacent one another but in oppositely inclined relation to a beam of light emitted from a light reader; positioning a fuel rod, having a cylindrical surface portion with a bar code etched directly thereon, relative to the light diffuser surfaces such that the surfaces are disposed adjacent to and in oppositely inclined relation along opposite sides of the fuel rod surface portion and the fuel rod surface portion is aligned with the beam of light emitted from the light reader; directing the beam of light on the bar code on fuel rod cylindrical surface portion such that the light is reflected therefrom onto one of the light diffuser surfaces; and receiving and reading the reflected light from the bar code via the one of the light diffuser surfaces to the light reader

  17. Laser bar code applied in computer aided design of power fittings

    Science.gov (United States)

    Yang, Xiaohong; Yang, Fan

    2010-10-01

    A computer aided process planning system is developed based on laser bar code technology to automatize and standardize processing-paper making. The system sorts fittings by analyzing their types, structures, dimensions, materials, and technics characteristics, groups and encodes the fittings with similar technology characteristics base on the theory of Group Technology (GT). The system produces standard technology procedures using integrative-parts method and stores them into technics databases. To work out the technology procedure of fittings, the only thing for users need to do is to scan the bar code of fittings with a laser code reader. The system can produce process-paper using decision trees method and then print the process-cards automatically. The software has already been applied in some power stations and is praised by the users.

  18. Preliminary investigation of acoustic bar codes for short-range underwater communications

    Science.gov (United States)

    Jones, Dennis F.

    2005-09-01

    In March 2005, underwater acoustic communications experiments were carried out from the DRDC Atlantic research vessel CFAV QUEST. A battery-operated BATS20 transmitter and a broadband barrel-stave flextensional transducer were used to broadcast noise containing acoustic bar code (ABC) information. The ABCs are silent frequency bands of fixed duration that resemble retail bar codes when viewed in a spectrogram. Two sites were selected for the experiments. The first was a shallow-water area west of the Berry Islands in the Bahamas, and the second was a deep-water site south of the Western Bank on the Scotian Shelf. Two receiver systems were deployed; autonomous, variable-buoyancy Stealth Buoys resting on the bottom at the shallow site, and drifting AN/SSQ-53F sonobuoys fitted with GPS at the deep site. Results from these experiments will be presented and future work will be discussed.

  19. Scanning micro-mirrors: from bar-code scanning to spectroscopy

    Science.gov (United States)

    Zimmer, F.; Grueger, H.; Heberer, A.; Sandner, T.; Wolter, A.; Schenk, H.

    2005-08-01

    Micro Opto Electro Mechanical Systems (MOEMS) reach more and more importance in technical applications. They are smaller than conventional devices, less expensive when fabricated in higher numbers and offer new options concerning reliability and measuring methods. Resonant movable micro-mirrors produced as single crystalline chips with CMOS-compatible technologies provide a broad field of applications. In this paper, we will present different micro-mirrors, which are developed by the Fraunhofer IPMS in Dresden, Germany. They have different layouts and are thus suitable for several applications. Fabricated 1D-mirrors with mechanical angles of +/- 16° can be used for laser deflection in bar-code-scanners, 2D-mirrors with different sizes and frequencies are suitable for imaging, displaying etc. Furthermore processes to apply diffractive structures on the micro-mirror surface were developed, showing an increased efficiency in the first diffraction order. Thus a micro-spectrometer has been built up, working in a wavelength range of 900-2500 nm. Due to the Czerny-Turner set-up, only one fast single InGaAs-photodiode is required.

  20. Improving Patient Safety by Identifying Side Effects from Introducing Bar Coding in Medication Administration

    OpenAIRE

    Patterson, Emily S.; Cook, Richard I.; Marta L. Render

    2002-01-01

    Objective. In addition to providing new capabilities, the introduction of technology in complex, sociotechnical systems, such as health care and aviation, can have unanticipated side effects on technical, social, and organizational dimensions. To identify potential accidents in the making, the authors looked for side effects from a natural experiment, the implementation of bar code medication administration (BCMA), a technology designed to reduce adverse drug events (ADEs).

  1. The design of the CMOS wireless bar code scanner applying optical system based on ZigBee

    Science.gov (United States)

    Chen, Yuelin; Peng, Jian

    2008-03-01

    The traditional bar code scanner is influenced by the length of data line, but the farthest distance of the wireless bar code scanner of wireless communication is generally between 30m and 100m on the market. By rebuilding the traditional CCD optical bar code scanner, a CMOS code scanner is designed based on the ZigBee to meet the demands of market. The scan system consists of the CMOS image sensor and embedded chip S3C2401X, when the two dimensional bar code is read, the results show the inaccurate and wrong code bar, resulted from image defile, disturber, reads image condition badness, signal interference, unstable system voltage. So we put forward the method which uses the matrix evaluation and Read-Solomon arithmetic to solve them. In order to construct the whole wireless optics of bar code system and to ensure its ability of transmitting bar code image signals digitally with long distances, ZigBee is used to transmit data to the base station, and this module is designed based on image acquisition system, and at last the wireless transmitting/receiving CC2430 module circuit linking chart is established. And by transplanting the embedded RTOS system LINUX to the MCU, an applying wireless CMOS optics bar code scanner and multi-task system is constructed. Finally, performance of communication is tested by evaluation software Smart RF. In broad space, every ZIGBEE node can realize 50m transmission with high reliability. When adding more ZigBee nodes, the transmission distance can be several thousands of meters long.

  2. Analysis of the technology acceptance model in examining hospital nurses' behavioral intentions toward the use of bar code medication administration.

    Science.gov (United States)

    Song, Lunar; Park, Byeonghwa; Oh, Kyeung Mi

    2015-04-01

    Serious medication errors continue to exist in hospitals, even though there is technology that could potentially eliminate them such as bar code medication administration. Little is known about the degree to which the culture of patient safety is associated with behavioral intention to use bar code medication administration. Based on the Technology Acceptance Model, this study evaluated the relationships among patient safety culture and perceived usefulness and perceived ease of use, and behavioral intention to use bar code medication administration technology among nurses in hospitals. Cross-sectional surveys with a convenience sample of 163 nurses using bar code medication administration were conducted. Feedback and communication about errors had a positive impact in predicting perceived usefulness (β=.26, Pmodel predicting for behavioral intention, age had a negative impact (β=-.17, Pmodel explained 24% (Ptechnology.

  3. Overcoming Barriers to the Implementation of a Pharmacy Bar Code Scanning System for Medication Dispensing: A Case Study

    OpenAIRE

    Nanji, Karen C.; Cina, Jennifer; Patel, Nirali; Churchill, William; Gandhi, Tejal K.; Poon, Eric G.

    2009-01-01

    Technology has great potential to reduce medication errors in hospitals. This case report describes barriers to, and facilitators of, the implementation of a pharmacy bar code scanning system to reduce medication dispensing errors at a large academic medical center. Ten pharmacy staff were interviewed about their experiences during the implementation. Interview notes were iteratively reviewed to identify common themes. The authors identified three main barriers to pharmacy bar code scanning s...

  4. Effects of spherical aberration on the laser beam of a bar code scanner

    Science.gov (United States)

    Tang, Hong

    1998-08-01

    The modulation transfer function of bar code scanning is a useful tool for evaluating the performance of the scanning laser beam. Understanding the behavior of the scanning laser system near the end of its depth of focus is of particular interest because it may lead to the development of techniques that could effective extend the depth of focus. In the article the MTF at focus and the two extremes of the depth of focus are presented. The presence of spherical aberration in the scanning laser beam generally reduces the depth of focus. The effects of the spherical aberration to the MTF is presented and discussed.

  5. Animal house stock control based on bar-coded cage labels.

    Science.gov (United States)

    Wootton, R

    1985-10-01

    In an animal house serving the needs of a large research institute, a regular inventory of the animals in stock is a considerable help towards effective management of the facility. In particular, advising the licence-holders of what animals are being held in their name and reminding them of the costs involved is a valuable exercise. The introduction of a computerized system of stock control, based on bar-coded cage labels, is described. The system has proved economical to operate, accurate, and can be run by persons without computer expertise. PMID:4068665

  6. Fuel Cycle Requirements Code (FLYER). Summary report

    International Nuclear Information System (INIS)

    Planning for, and the analysis of, the fuel requirements of the nuclear industry requires the ability to evaluate contingencies in many areas of the nuclear fuel cycle. The areas of nuclear fuel utilization, both uranium and plutonium, and of separative work requirements are of particular interest. The Fuel Cycle Requirements (FLYER) model has been developed to provide a flexible, easily managed tool for obtaining a comprehensive analysis of the nuclear fuel cycle. The model allows analysis of the interactions among the nuclear capacity growth rate, reactor technology and mix, and uranium and plutonium recycling capabilities. The model was initially developed as a means of analyzing nuclear growth contingencies with particular emphasis on the uranium feed and separative work requirements. It served to provide the planning group with analyses similar to the OPA's NUFUEL code which has only recently become available for general use. The model has recently been modified to account for some features of the fuel cycle in a more explicit manner than the NUFUEL code. For instance, the uranium requirements for all reactors installed in a given year are calculated for the total lifetime of those reactors. These values are cumulated in order to indicate the total uranium committed for reactors installed by any given year of the campaign. Similarly, the interactions in the back end of the fuel cycle are handled specifically, such as, the impacts resulting from limitations on the industrial capacity for reprocessing and mixed oxide fabrication of both light water reactor and breeder fuels. The principal features of the modified FLYER code are presented in summary form

  7. MARS code manual volume II: input requirements

    International Nuclear Information System (INIS)

    Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This input manual provides a complete list of input required to run MARS. The manual is divided largely into two parts, namely, the one-dimensional part and the multi-dimensional part. The inputs for auxiliary parts such as minor edit requests and graph formatting inputs are shared by the two parts and as such mixed input is possible. The overall structure of the input is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

  8. Use of bar-code technology in MC and A system

    International Nuclear Information System (INIS)

    Full text: Significant problem during the treatment of nuclear materials is the usage of reliable, rapid, integrate automated systems of nuclear material control and account to reduce the dose loading of personnel. One of the directions to solve the indicated problems is the usage of bar-code technology. Such integrated system should include protection of materials, measuring of materials, and record of materials and drawing up of an inventory list. It is especially important for the enterprises, in which the enriched uranium and other nuclear materials, under IAEA warranties, are utilized. According to US assistance program in the field of MC and A, NSC KIPT has been received indispensable equipment and software, including equipment of nondestructive analysis and automated inventory material accounting system (AIMAS), which was intended for modernizing of nuclear material account system in NSC KIPT. The purpose of operations was estimation of generalized procedures on both MC and A and nondestructive analysis, and updating them so that they might obey the specific conditions of the Enterprise and demands of the Ukraine Regulatory Administration. In NSC KIPT, which is the largest nuclear and physics research center in Ukraine, the measures on enactment of bar-code technology for nuclear materials control and account with the usage of equipment and software of US leading firms (Intermec, Prodigy Max, Tharo Systems, Inc) have been conducting since 1999. During the introduction of this technology, the software on nuclear material control and account (AIMAS data base) has been installed on NSC KIPT computers. The structure of the NSC KIPT's facility has been determined according to demands of the State and IAEA demands. The items of information on the structure of the Facility, and data, which was verified and prepared for input, on nuclear material for each key measuring point of inventory quantity of the material have been set into nuclear material control and

  9. High-speed two-dimensional bar-code detection system with time-sharing laser light emission method

    Science.gov (United States)

    Wakaumi, Hiroo; Nagasawa, Chikao

    2000-12-01

    A novel twodimensional bar-code detection system with time-sharing light emission laser diodes is proposed. A bias current allowing the laser diode to improve the light output rise time is optimized to slightly below the threshold of the diode, so that channel cross-talk among three-layer bar-code signals caused by the bias light can be kept small and a high-speed pulse modulation drive operation can be achieved. A prototype system for a three-layer bar code has achieved an effective scanning speed two and nine tenths times that of conventional scanners. It is estimated from the detection range that the number of time-sharing light emission laser diodes can be increased to at least four, when the current detection amplifier with a bandwidth of 6.4 MHz is used.

  10. Equipment Inventory Management and Transaction Recording Using Bar Coding Scheme via VB6

    Directory of Open Access Journals (Sweden)

    Geoffrey T. Salvador, PECE

    2016-06-01

    Full Text Available The aim of the study is to implement bar coding system developed through the VB6 and Microsoft Access as mechanism for the PUP ECE Laboratory Transaction recording and monitoring. The study was concerned on proper documenting and managing the daily transaction of the ECE Laboratory with the AutoLab System.Results showed that the AutoLab System effectively automated the recording of transactions merging the existing manual method into one recording mechanism. The Automated Laboratory coined as AutoLab merged the ECE Room Utilization Log Book, ECE Borrower’s Slip and the ECE Transaction Log Book into one complete package in terms of transaction recording and equipment inventory monitoring

  11. Speckle Noise in Bar-Code Scanning Systems -Power Spectral Density and SNR

    Science.gov (United States)

    Marom, Emanuel; KrěIć-Juri, SǎA.; Bergstein, Leonard

    2003-01-01

    Laser-based flying-spot scanners are strongly affected by speckle that is intrinsic to coherent illumination of diffusing targets. In such systems information is usually extracted by processing the derivative of a photodetector signal that results from collecting over the detector's aperture the scattered light of a laser beam scanning a bar code. Because the scattered light exhibits a time-varying speckle pattern, the signal is corrupted by speckle noise. In this paper we investigate the power spectral density and total noise power of such signals. We also analyze the influence of speckle noise on edge detection and derive estimates for a signal-to-noise ratio when a laser beam scans different sequences of edges. The theory is illustrated by applying the results to Gaussian scanning beams for which we derive closed form expressions.

  12. Requirements of a Better Secure Program Coding

    Directory of Open Access Journals (Sweden)

    Marius POPA

    2012-01-01

    Full Text Available Secure program coding refers to how manage the risks determined by the security breaches because of the program source code. The papers reviews the best practices must be doing during the software development life cycle for secure software assurance, the methods and techniques used for a secure coding assurance, the most known and common vulnerabilities determined by a bad coding process and how the security risks are managed and mitigated. As a tool of the better secure program coding, the code review process is presented, together with objective measures for code review assurance and estimation of the effort for the code improvement.

  13. Use of bar-code technology in MC and A system

    International Nuclear Information System (INIS)

    Full text: Significant problem during the treatment with nuclear materials is the usage of reliable, rapid, integrant automated systems of nuclear material control and account. Thus the dose loading of attending technical personnel is essentially reduced. One of the directions of the solution of the indicated problems is the usage of bar-code technology. Such integrated system should include protection of materials, measuring of materials, and record of materials and drawing up of an inventory list. Especially it is important for the enterprises, on which the enriched uranium and other nuclear materials, which are under IAEA warranties, are utilized. According to US assistance program in the field of MC and A, NSC KIPT has been received indispensable equipment and software, including equipment of nondestructive analysis and automated inventory material accounting system (AIMAS), which was intended for modernizing of nuclear material account system in NSC KIPT. The purpose of operations was estimation of generalized procedures on both MC and A and nondestructive analysis, and updating them so that they might obey the specific conditions of the Enterprise and demands of the Ukraine Regulatory Administration. In NSC KIPT, which is the largest nuclear and physics research center in Ukraine, the measures on enactment of bar-code technology for nuclear materials control and account with the usage of equipment and software of US leading firms (Intermec, Prodigy Max, Tharo Systems, Inc) have been conducting since 1999. During the introduction of this technology, it has been installed the software on nuclear material control and account (AIMAS data base), which was intended for this activities, on NSC KIPT computers. The structure of the NSC KIPT's facility has been determined according to demands of the State and IAEA demands. The key measuring points of inventory quantity has been determined in nuclear material balance zone and the concrete computers, on which is kept

  14. 基于链码跟踪的Data Matrix二维条码快速识别%Quick identification of Data Matrix two-dimensional bar code based on chain code tracking

    Institute of Scientific and Technical Information of China (English)

    徐义钊; 白瑞林; 余震虹; 吉峰

    2012-01-01

    为实现工业现场中Data Matrix二维条码的快速识别,提出一种基于链码跟踪、直线段提取的条码快速识别方法.首先采用Sobel算子提取图像边缘;然后基于链码跟踪方法,跟踪图像的边缘点,记录链码;接着根据快速直线段提取方法,将直线相似度低于阈值的线段剔除,结合线形连接方法合并断裂线段,并使用长度判别剔除不可靠的线段;最后结合Data Matrix二维条码的特征,定位Data Matrix二维条码.实际测试表明,该识别方法能够快速、准确地定位二维条码区域,识别正确率可达99.39%以上,具有实时性强、可靠性好等特点,满足工业现场要求.%A two-dimensional bar code recognition method based on chain code tracking and straight line segment extraction was proposed in order to realize quick identification of the Data Matrix two-dimensional bar code in the industrial field. Firstly, the Sobel operator was used to extract the edge of image. Secondly, the image edge points were tracked and chain codes were recorded based on chain code tracking method. Thirdly, line segment whose straight line similarity was below the threshold was removed with fast straight line segment extraction method. The fracture line was combined with the linear connection method and the unreliable line was excluded by length discrimination. Finally, the Data Matrix bar code was located with the characteristics of the Data Matrix two-dimensional bar code. The application test shows that the two-dimensional bar code area can be quickly and accurately located by the recognition method with the recognition rate of 99. 39%. The proposed method is ready to meet the requirements of industrial field with strong real-time ability and high reliability.

  15. DNA bar coding and pyrosequencing to analyze adverse events in therapeutic gene transfer.

    Science.gov (United States)

    Wang, Gary P; Garrigue, Alexandrine; Ciuffi, Angela; Ronen, Keshet; Leipzig, Jeremy; Berry, Charles; Lagresle-Peyrou, Chantal; Benjelloun, Fatine; Hacein-Bey-Abina, Salima; Fischer, Alain; Cavazzana-Calvo, Marina; Bushman, Frederic D

    2008-05-01

    Gene transfer has been used to correct inherited immunodeficiencies, but in several patients integration of therapeutic retroviral vectors activated proto-oncogenes and caused leukemia. Here, we describe improved methods for characterizing integration site populations from gene transfer studies using DNA bar coding and pyrosequencing. We characterized 160,232 integration site sequences in 28 tissue samples from eight mice, where Rag1 or Artemis deficiencies were corrected by introducing the missing gene with gamma-retroviral or lentiviral vectors. The integration sites were characterized for their genomic distributions, including proximity to proto-oncogenes. Several mice harbored abnormal lymphoproliferations following therapy--in these cases, comparison of the location and frequency of isolation of integration sites across multiple tissues helped clarify the contribution of specific proviruses to the adverse events. We also took advantage of the large number of pyrosequencing reads to show that recovery of integration sites can be highly biased by the use of restriction enzyme cleavage of genomic DNA, which is a limitation in all widely used methods, but describe improved approaches that take advantage of the power of pyrosequencing to overcome this problem. The methods described here should allow integration site populations from human gene therapy to be deeply characterized with spatial and temporal resolution.

  16. Establishing and evaluating bar-code technology in blood sampling system: a model based on human centered human-centered design method

    OpenAIRE

    Chou, Shin-Shang; Yan, Hsiu-Fang; Huang, Hsiu-Ya; Tseng, Kuan-Jui; Kuo, Shu-Chen

    2012-01-01

    This study intended to use a human-centered design study method to develop a bar-code technology in blood sampling process. By using the multilevel analysis to gather the information, the bar-code technology has been constructed to identify the patient’s identification, simplify the work process, and prevent medical error rates. A Technology Acceptance Model questionnaire was developed to assess the effectiveness of system and the data of patient’s identification and sample errors were collec...

  17. Requirements for a multifunctional code architecture

    Energy Technology Data Exchange (ETDEWEB)

    Tiihonen, O. [VTT Energy (Finland); Juslin, K. [VTT Automation (Finland)

    1997-07-01

    The present paper studies a set of requirements for a multifunctional simulation software architecture in the light of experiences gained in developing and using the APROS simulation environment. The huge steps taken in the development of computer hardware and software during the last ten years are changing the status of the traditional nuclear safety analysis software. The affordable computing power on the safety analysts table by far exceeds the possibilities offered to him/her ten years ago. At the same time the features of everyday office software tend to set standards to the way the input data and calculational results are managed.

  18. Requirements for a multifunctional code architecture

    International Nuclear Information System (INIS)

    The present paper studies a set of requirements for a multifunctional simulation software architecture in the light of experiences gained in developing and using the APROS simulation environment. The huge steps taken in the development of computer hardware and software during the last ten years are changing the status of the traditional nuclear safety analysis software. The affordable computing power on the safety analysts table by far exceeds the possibilities offered to him/her ten years ago. At the same time the features of everyday office software tend to set standards to the way the input data and calculational results are managed

  19. Color bar coding the BRCA1 gene on combed DNA: a useful strategy for detecting large gene rearrangements.

    Science.gov (United States)

    Gad, S; Aurias, A; Puget, N; Mairal, A; Schurra, C; Montagna, M; Pages, S; Caux, V; Mazoyer, S; Bensimon, A; Stoppa-Lyonnet, D

    2001-05-01

    Genetic linkage data have shown that alterations of the BRCA1 gene are responsible for the majority of hereditary breast and ovarian cancers. BRCA1 germline mutations, however, are found less frequently than expected. Mutation detection strategies, which are generally based on the polymerase chain reaction, therefore focus on point and small gene alterations. These approaches do not allow for the detection of large gene rearrangements, which also can be involved in BRCA1 alterations. Indeed, a few of them, spread over the entire BRCA1 gene, have been detected recently by Southern blotting or transcript analysis. We have developed an alternative strategy allowing a panoramic view of the BRCA1 gene, based on dynamic molecular combing and the design of a full four-color bar code of the BRCA1 region. The strategy was tested with the study of four large BRCA1 rearrangements previously reported. In addition, when screening a series of 10 breast and ovarian cancer families negatively tested for point mutation in BRCA1/2, we found an unreported 17-kb BRCA1 duplication encompassing exons 3 to 8. The detection of rearrangements as small as 2 to 6 kb with respect to the normal size of the studied fragment is achieved when the BRCA1 region is divided into 10 fragments. In addition, as the BRCA1 bar code is a morphologic approach, the direct observation of complex and likely underreported rearrangements, such as inversions and insertions, becomes possible. PMID:11284038

  20. Renewable Energy Requirements for Future Building Codes: Options for Compliance

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, Heather E.; Antonopoulos, Chrissi A.; Solana, Amy E.; Russo, Bryan J.

    2011-09-30

    As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, use of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including envelope, mechanical and lighting, have been pressed to the end of reasonable limits. Research has been conducted to determine the mechanism for implementing this requirement (Kaufman 2011). Kaufmann et al. determined that the most appropriate way to structure an on-site renewable requirement for commercial buildings is to define the requirement in terms of an installed power density per unit of roof area. This provides a mechanism that is suitable for the installation of photovoltaic (PV) systems on future buildings to offset electricity and reduce the total building energy load. Kaufmann et al. suggested that an appropriate maximum for the requirement in the commercial sector would be 4 W/ft{sup 2} of roof area or 0.5 W/ft{sup 2} of conditioned floor area. As with all code requirements, there must be an alternative compliance path for buildings that may not reasonably meet the renewables requirement. This might include conditions like shading (which makes rooftop PV arrays less effective), unusual architecture, undesirable roof pitch, unsuitable building orientation, or other issues. In the short term, alternative compliance paths including high performance mechanical equipment, dramatic envelope changes, or controls changes may be feasible. These options may be less expensive than many renewable systems, which will require careful balance of energy measures when setting the code requirement levels. As the stringency of the code continues to increase however, efficiency trade-offs will be maximized, requiring alternative compliance options to be focused solely on renewable electricity trade-offs or equivalent programs. One alternate compliance path includes purchase of Renewable Energy

  1. Golgi membrane fission requires the CtBP1-S/BARS-induced activation of lysophosphatidic acid acyltransferase δ.

    Science.gov (United States)

    Pagliuso, Alessandro; Valente, Carmen; Giordano, Lucia Laura; Filograna, Angela; Li, Guiling; Circolo, Diego; Turacchio, Gabriele; Marzullo, Vincenzo Manuel; Mandrich, Luigi; Zhukovsky, Mikhail A; Formiggini, Fabio; Polishchuk, Roman S; Corda, Daniela; Luini, Alberto

    2016-01-01

    Membrane fission is an essential cellular process by which continuous membranes split into separate parts. We have previously identified CtBP1-S/BARS (BARS) as a key component of a protein complex that is required for fission of several endomembranes, including basolateral post-Golgi transport carriers. Assembly of this complex occurs at the Golgi apparatus, where BARS binds to the phosphoinositide kinase PI4KIIIβ through a 14-3-3γ dimer, as well as to ARF and the PKD and PAK kinases. We now report that, when incorporated into this complex, BARS binds to and activates a trans-Golgi lysophosphatidic acid (LPA) acyltransferase type δ (LPAATδ) that converts LPA into phosphatidic acid (PA); and that this reaction is essential for fission of the carriers. LPA and PA have unique biophysical properties, and their interconversion might facilitate the fission process either directly or indirectly (via recruitment of proteins that bind to PA, including BARS itself). PMID:27401954

  2. Golgi membrane fission requires the CtBP1-S/BARS-induced activation of lysophosphatidic acid acyltransferase δ.

    Science.gov (United States)

    Pagliuso, Alessandro; Valente, Carmen; Giordano, Lucia Laura; Filograna, Angela; Li, Guiling; Circolo, Diego; Turacchio, Gabriele; Marzullo, Vincenzo Manuel; Mandrich, Luigi; Zhukovsky, Mikhail A; Formiggini, Fabio; Polishchuk, Roman S; Corda, Daniela; Luini, Alberto

    2016-07-12

    Membrane fission is an essential cellular process by which continuous membranes split into separate parts. We have previously identified CtBP1-S/BARS (BARS) as a key component of a protein complex that is required for fission of several endomembranes, including basolateral post-Golgi transport carriers. Assembly of this complex occurs at the Golgi apparatus, where BARS binds to the phosphoinositide kinase PI4KIIIβ through a 14-3-3γ dimer, as well as to ARF and the PKD and PAK kinases. We now report that, when incorporated into this complex, BARS binds to and activates a trans-Golgi lysophosphatidic acid (LPA) acyltransferase type δ (LPAATδ) that converts LPA into phosphatidic acid (PA); and that this reaction is essential for fission of the carriers. LPA and PA have unique biophysical properties, and their interconversion might facilitate the fission process either directly or indirectly (via recruitment of proteins that bind to PA, including BARS itself).

  3. Software requirements specification document for the AREST code development

    International Nuclear Information System (INIS)

    The Analysis of the Repository Source Term (AREST) computer code was selected in 1992 by the U.S. Department of Energy. The AREST code will be used to analyze the performance of an underground high level nuclear waste repository. The AREST code is being modified by the Pacific Northwest Laboratory (PNL) in order to evaluate the engineered barrier and waste package designs, model regulatory compliance, analyze sensitivities, and support total systems performance assessment modeling. The current version of the AREST code was developed to be a very useful tool for analyzing model uncertainties and sensitivities to input parameters. The code has also been used successfully in supplying source-terms that were used in a total systems performance assessment. The current version, however, has been found to be inadequate for the comparison and selection of a design for the waste package. This is due to the assumptions and simplifications made in the selection of the process and system models. Thus, the new version of the AREST code will be designed to focus on the details of the individual processes and implementation of more realistic models. This document describes the requirements of the new models that will be implemented. Included in this document is a section describing the near-field environmental conditions for this waste package modeling, description of the new process models that will be implemented, and a description of the computer requirements for the new version of the AREST code

  4. A high-speed 12-layer two-dimensional bar code detection system with wideband photodetection amplifier and balanced raster scanner

    Science.gov (United States)

    Wakaumi, Hiroo; Ajiki, Hiroshi

    1998-12-01

    A high-speed 12-layer 2D bar-code detection system (BCDS) consisting of a photodetection amplifier with an amplification-type current-voltage converter and a balanced raster scanner combined with the complementary light emission drive method for laser diodes, has been developed in order to provide both a high effective scanning speed and multi-layer bar-code detection. This BCDS performs 1,250 scan/s, which is two and a half times the scanning speed of a conventional bar-code detection system. A new theoretical modulation model that gives an accurate model for laser scanning beam traces obtained by the balanced raster scanner is proposed. This model allows an optimum BCDS to be designed easily.

  5. Integrating Renewable Energy Requirements Into Building Energy Codes

    Energy Technology Data Exchange (ETDEWEB)

    Kaufmann, John R.; Hand, James R.; Halverson, Mark A.

    2011-07-01

    This report evaluates how and when to best integrate renewable energy requirements into building energy codes. The basic goals were to: (1) provide a rough guide of where we’re going and how to get there; (2) identify key issues that need to be considered, including a discussion of various options with pros and cons, to help inform code deliberations; and (3) to help foster alignment among energy code-development organizations. The authors researched current approaches nationally and internationally, conducted a survey of key stakeholders to solicit input on various approaches, and evaluated the key issues related to integration of renewable energy requirements and various options to address those issues. The report concludes with recommendations and a plan to engage stakeholders. This report does not evaluate whether the use of renewable energy should be required on buildings; that question involves a political decision that is beyond the scope of this report.

  6. Bar Code Technology of Interactive Teaching%条形码技术的互动教学

    Institute of Scientific and Technical Information of China (English)

    林胜青

    2014-01-01

    学习现代科学技术,并结合在生活中实际应用,尽量提倡师生用互动式教学,推动当今的现代化教育,提高教育质量。本文介绍利用互动式教学方法,讲授条形码的制作原理及实际应用。%Learning modern science and technology,and connecting with the practical application in our daily life,try to advocate using interactive teaching between teachers and students,promote the today's modern education,improve the quality of education. This article shows that using interactive teaching methods,teaching of bar code principle and prac-tical application.

  7. Bar code hotel: diverse interactions of semi-autonomous entities under the partial control of multiple operators

    Science.gov (United States)

    Hoberman, Perry

    1995-03-01

    In this paper I describe an interactive installation that was produced in 1994 as one of eight Art and Virtual Environments projects sponsored by the Banff Center for the Arts. The installation, Bar Code Hotel, makes use of a number of strategies to create a casual, social, multi-person interface. Among the goals was to investigate methods that would minimize any significant learning curve, allowing visitors to immediately interact with a virtual world in a meaningful way. By populating this virtual world with semi-independent entities that could be directed by participants even as these entities were interacting with each other, a rich and heterogeneous experience was produced in which a variety of relationships between human participants and virtual objects could be examined. The paper will describe some of the challenges of simultaneously processing multiple input sources affecting a virtual environment in which each object already has its own ongoing behavior.

  8. Towards a spectrum-based bar code for identification of weakly fluorescent microparticles

    International Nuclear Information System (INIS)

    Spectrally resolved detection of fluorescent probes can be used to identify multiple labeled target molecules in an unknown mixture. We study how the spectral shape, the experimental noise, and the number of spectral detection channels affect the success of identification of weakly fluorescent beads on basis of their emission spectra. The proposed formalism allows to estimate the performance of the spectral identification procedure with a given set of spectral codes on the basis of the reference spectra only. We constructed a simple prism-based setup for spectral detection and demonstrate that seven distinct but overlapping spectral codes realized by combining up to three fluorescent dyes bound to a single bead in a barcode-based manner can be reliably identified. The procedure allows correct identification even in the presence of known autofluorescence background stronger than the actual signal. (paper)

  9. New York State Code Adoption Analysis: Lighting Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Richman, Eric E.

    2004-10-20

    The adoption of the IECC 2003 Energy code will include a set of Lighting Power Density (LPD) values that are effectively a subset of the values in Addendum g to the ASHRAE/IESNA/ANSI 90.1-2001 Standard which will soon be printed as part of the 90.1-2004 version. An analysis of the effectiveness of this adoption for New York State can be provided by a direct comparison of these values with existing LPD levels represented in the current IECC 2000 code, which are themselves a subset of the current ASHRAE/IESNA/ANSI 90.1-2001 Standard (without addenda). Because the complete ASHRAE 2001 and 2004 sets of LPDs are supported by a set of detailed models, they are best suited to provide the basis for an analysis comparison of the two code levels of lighting power density stringency. It is important to note that this kind of analysis is a point-to-point comparison where a fixed level of real world activity is assumed. It is understood that buildings are not built precisely to code levels and that actual percentage of compliance above and below codes will vary among individual buildings and building types. However, without specific knowledge of this real world activity for all buildings in existence and in the future (post-code adoption) it is not possible to analyze actual effects of code adoption. However, it is possible to compare code levels and determine the potential effect of changes from one code requirement level to another. This is the comparison and effectiveness assessment

  10. Energy Cost Impact of Non-Residential Energy Code Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jian; Hart, Philip R.; Rosenberg, Michael I.

    2016-08-22

    The 2012 International Energy Conservation Code contains 396 separate requirements applicable to non-residential buildings; however, there is no systematic analysis of the energy cost impact of each requirement. Consequently, limited code department budgets for plan review, inspection, and training cannot be focused on the most impactful items. An inventory and ranking of code requirements based on their potential energy cost impact is under development. The initial phase focuses on office buildings with simple HVAC systems in climate zone 4C. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance. A preliminary estimate of the probability of occurrence of each level of non-compliance was combined with the estimated lost savings for each level to rank the requirements according to expected savings impact. The methodology to develop and refine further energy cost impacts, specific to building type, system type, and climate location is demonstrated. As results are developed, an innovative alternative method for compliance verification can focus efforts so only the most impactful requirements from an energy cost perspective are verified for every building and a subset of the less impactful requirements are verified on a random basis across a building population. The results can be further applied in prioritizing training material development and specific areas of building official training.

  11. Design of Bar Code Automatic Printing System Based on LabVIEW%基于LabVIEW的条码自动打印系统设计

    Institute of Scientific and Technical Information of China (English)

    周先飞; 李敏; 杨会伟

    2016-01-01

    汽车行业中各个设备都来自不同的供应商,要实现产品溯源需从条码去区别。针对汽车大灯产品检测系统之后的自动打印条码,实现检测过程的自动化要求。提出了采用单片机制作的数据采集卡和LabVIEW建立的上位机软件,实现对检测完好的产品进行条码的自动打印输出,在上位机中可以对不同型号的产品进行条码的切换,在生产线上具有完全自动化功能,经现场使用,稳定性良好。%In automotive industry ,each equipment comes from different suppliers ,it needs bar codes to distinguish the products. Towards the automatic printing of bar codes after testing of headlight product , the paper realizes the automation of testing process. This paper presents MCU for DAQ and labVIEV for upper computer softwave ,to realize the automatic printing of bar codes tested ,it can change the bar codes in upper computer for differen products. The system has automation function ,and has good stability proved by field use.

  12. Coupling scanning electronc microscopy with DNA bar coding: A novel approach for thrips identification

    Science.gov (United States)

    The small size and cryptic nature of thrips pests help them acquire microhabitats of a plant and in the field, often making their monitoring and the identification process difficult. Accurate identification of such pests is a fundamental requirement in development of any effective quarantine and man...

  13. Code forking in open-source software: a requirements perspective

    CERN Document Server

    Ernst, Neil A; Mylopoulos, John

    2010-01-01

    To fork a project is to copy the existing code base and move in a direction different than that of the erstwhile project leadership. Forking provides a rapid way to address new requirements by adapting an existing solution. However, it can also create a plethora of similar tools, and fragment the developer community. Hence, it is not always clear whether forking is the right strategy. In this paper, we describe a mixed-methods exploratory case study that investigated the process of forking a project. The study concerned the forking of an open-source tool for managing software projects, Trac. Trac was forked to address differing requirements in an academic setting. The paper makes two contributions to our understanding of code forking. First, our exploratory study generated several theories about code forking in open source projects, for further research. Second, we investigated one of these theories in depth, via a quantitative study. We conjectured that the features of the OSS forking process would allow new...

  14. Mars 2.2 code manual: input requirements

    International Nuclear Information System (INIS)

    Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This input manual provides a complete list of input required to run MARS. The manual is divided largely into two parts, namely, the one-dimensional part and the multi-dimensional part. The inputs for auxiliary parts such as minor edit requests and graph formatting inputs are shared by the two parts and as such mixed input is possible. The overall structure of the input is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS. MARS development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

  15. Use of a bar code scanner to improve the utility and flexibility of record and verify systems used in radiation therapy

    International Nuclear Information System (INIS)

    Record and verify systems used in radiation therapy serve a useful purpose in verification of machine parameters for each radiation field and monitoring the treatment as it is administered. There are, however, limitations as to the completeness of this monitoring. These restrictions are primarily due to design limitations of accelerators, which provide only a limited number of hardwired signals for use by such systems. The extent of the signals provided varies among manufacturers. As a result, some commonly used treatment accessories, such as blocking trays, may not be recognized by these systems. Additionally, current commercial record and verify systems cannot be expanded to accommodate institution-specific, customized treatment accessories or devices for positioning or immobilization of patients. This paper describes a complementary approach to providing device detection using a bar code scanner to read coded labels mounted on treatment accessories and download the data into the record and verify system for processing. A microcomputer-based system employing a portable bar code scanner was developed to evaluate the potential of this concept. Implications of adding bar code scanners to record and verify systems are discussed

  16. Code forking in open-source software: a requirements perspective

    OpenAIRE

    Ernst, Neil A.; Easterbrook, Steve; Mylopoulos, John

    2010-01-01

    To fork a project is to copy the existing code base and move in a direction different than that of the erstwhile project leadership. Forking provides a rapid way to address new requirements by adapting an existing solution. However, it can also create a plethora of similar tools, and fragment the developer community. Hence, it is not always clear whether forking is the right strategy. In this paper, we describe a mixed-methods exploratory case study that investigated the process of forking a ...

  17. No Code Required Giving Users Tools to Transform the Web

    CERN Document Server

    Cypher, Allen; Lau, Tessa; Nichols, Jeffrey

    2010-01-01

    Revolutionary tools are emerging from research labs that enable all computer users to customize and automate their use of the Web without learning how to program. No Code Required takes cutting edge material from academic and industry leaders - the people creating these tools -- and presents the research, development, application, and impact of a variety of new and emerging systems. *The first book since Web 2.0 that covers the latest research, development, and systems emerging from HCI research labs on end user programming tools *Featuring contributions from the creators of Adobe's Zoet

  18. BAR-CODE BASED WEIGHT MEASUREMENT STATION FOR PHYSICAL INVENTORY TAKING OF PLUTONIUM OXIDE CONTAINERS AT THE MINING AND CHEMICAL COMBINE RADIOCHEMICAL REPROCESSING PLANT NEAR KRASNOYARSK, SIBERIA

    International Nuclear Information System (INIS)

    This paper describes the technical tasks being implemented to computerize the physical inventory taking (PIT) at the Mining and Chemical Combine (Gorno-Khimichesky Kombinat, GKhK) radiochemical plant under the US/Russian cooperative nuclear material protection, control, and accounting (MPC and A) program. Under the MPC and A program, Lab-to-Lab task agreements with GKhK were negotiated that involved computerized equipment for item verification and confirmatory measurement of the Pu containers. Tasks under Phase I cover the work for demonstrating the plan and procedures for carrying out the comparison of the Pu container identification on the container with the computerized inventory records. In addition to the records validation, the verification procedures include the application of bar codes and bar coded TIDs to the Pu containers. Phase II involves the verification of the Pu content. A plan and procedures are being written for carrying out confirmatory measurements on the Pu containers

  19. An Algorithm for Constructing All Families of Codes of Arbitrary Requirement in an OCDMA System

    OpenAIRE

    Lu, Xiang; Chen, Jiajia; He, Sailing

    2006-01-01

    A novel code construction algorithm is presented to find all the possible code families for code reconfiguration in an OCDMA system. The algorithm is developed through searching all the complete subgraphs of a constructed graph. The proposed algorithm is flexible and practical for constructing optical orthogonal codes (OOCs) of arbitrary requirement. Simulation results show that one should choose an appropriate code length in order to obtain sufficient number of code families for code reconfi...

  20. Renewable Energy Requirements for Future Building Codes: Energy Generation and Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Bryan J.; Weimar, Mark R.; Dillon, Heather E.

    2011-09-30

    As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, installation of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including the building envelope, mechanical systems, and lighting, have been maximized at the most cost-effective limit.

  1. Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

    Energy Technology Data Exchange (ETDEWEB)

    Langenbuch, S.; Austregesilo, H.; Velkov, K. [GRS, Garching (Germany)] [and others

    1997-07-01

    The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes.

  2. Interface requirements to couple thermal hydraulics codes to severe accident codes: ICARE/CATHARE

    Energy Technology Data Exchange (ETDEWEB)

    Camous, F.; Jacq, F.; Chatelard, P. [IPSN/DRS/SEMAR CE-Cadarache, St Paul Lez Durance (France)] [and others

    1997-07-01

    In order to describe with the same code the whole sequence of severe LWR accidents, up to the vessel failure, the Institute of Protection and Nuclear Safety has performed a coupling of the severe accident code ICARE2 to the thermalhydraulics code CATHARE2. The resulting code, ICARE/CATHARE, is designed to be as pertinent as possible in all the phases of the accident. This paper is mainly devoted to the description of the ICARE2-CATHARE2 coupling.

  3. Equipment management system based on 2-dimensional bar code technology%基于二维码技术的装备管理系统的研究

    Institute of Scientific and Technical Information of China (English)

    戴军

    2013-01-01

      本文提出了依托二维码技术构建装备管理系统的构想,阐述了基于二维码的装备管理系统的架构和基本功能。该系统结合数据库技术和网络技术,可实现装备信息的装备状态标识、自动录入、实时数据传送等功能。建立基于二维码等自动识别技术的装备管理管理系统是实现装备全寿命管理的信息化、自动化的有效手段,本文对此有一定的实用性。%The paper puts forward the idea of building equipment management system based on the 2-dimensional bar code technology,describes the equipment management system of 2-dimensional bar code structure and basic function. The system can realize the equipment information of equipment state identification,automatic input,real-time data transmission and other functions.To establish the practical equipment management system based on 2-dimensional bar code automatic identification technology is the efficient method for the informatization and automatization of the equipments’ life cycle management and what this paper presents can serve as the reference for this task.

  4. Establishing and evaluating bar-code technology in blood sampling system: a model based on human centered human-centered design method.

    Science.gov (United States)

    Chou, Shin-Shang; Yan, Hsiu-Fang; Huang, Hsiu-Ya; Tseng, Kuan-Jui; Kuo, Shu-Chen

    2012-01-01

    This study intended to use a human-centered design study method to develop a bar-code technology in blood sampling process. By using the multilevel analysis to gather the information, the bar-code technology has been constructed to identify the patient's identification, simplify the work process, and prevent medical error rates. A Technology Acceptance Model questionnaire was developed to assess the effectiveness of system and the data of patient's identification and sample errors were collected daily. The average scores of 8 items users' perceived ease of use was 25.21(3.72), 9 items users' perceived usefulness was 28.53(5.00), and 14 items task-technology fit was 52.24(7.09), the rate of patient identification error and samples with order cancelled were down to zero, however, new errors were generated after the new system deployed; which were the position of barcode stickers on the sample tubes. Overall, more than half of nurses (62.5%) were willing to use the new system. PMID:24199057

  5. Interface requirements for coupling a containment code to a reactor system thermal hydraulic codes

    Energy Technology Data Exchange (ETDEWEB)

    Baratta, A.J.

    1997-07-01

    To perform a complete analysis of a reactor transient, not only the primary system response but the containment response must also be accounted for. Such transients and accidents as a loss of coolant accident in both pressurized water and boiling water reactors and inadvertent operation of safety relief valves all challenge the containment and may influence flows because of containment feedback. More recently, the advanced reactor designs put forth by General Electric and Westinghouse in the US and by Framatome and Seimens in Europe rely on the containment to act as the ultimate heat sink. Techniques used by analysts and engineers to analyze the interaction of the containment and the primary system were usually iterative in nature. Codes such as RELAP or RETRAN were used to analyze the primary system response and CONTAIN or CONTEMPT the containment response. The analysis was performed by first running the system code and representing the containment as a fixed pressure boundary condition. The flows were usually from the primary system to the containment initially and generally under choked conditions. Once the mass flows and timing are determined from the system codes, these conditions were input into the containment code. The resulting pressures and temperatures were then calculated and the containment performance analyzed. The disadvantage of this approach becomes evident when one performs an analysis of a rapid depressurization or a long term accident sequence in which feedback from the containment can occur. For example, in a BWR main steam line break transient, the containment heats up and becomes a source of energy for the primary system. Recent advances in programming and computer technology are available to provide an alternative approach. The author and other researchers have developed linkage codes capable of transferring data between codes at each time step allowing discrete codes to be coupled together.

  6. Interface requirements to couple thermal-hydraulic codes to severe accident codes: ATHLET-CD

    Energy Technology Data Exchange (ETDEWEB)

    Trambauer, K. [GRS, Garching (Germany)

    1997-07-01

    The system code ATHLET-CD is being developed by GRS in cooperation with IKE and IPSN. Its field of application comprises the whole spectrum of leaks and large breaks, as well as operational and abnormal transients for LWRs and VVERs. At present the analyses cover the in-vessel thermal-hydraulics, the early phases of core degradation, as well as fission products and aerosol release from the core and their transport in the Reactor Coolant System. The aim of the code development is to extend the simulation of core degradation up to failure of the reactor pressure vessel and to cover all physically reasonable accident sequences for western and eastern LWRs including RMBKs. The ATHLET-CD structure is highly modular in order to include a manifold spectrum of models and to offer an optimum basis for further development. The code consists of four general modules to describe the reactor coolant system thermal-hydraulics, the core degradation, the fission product core release, and fission product and aerosol transport. Each general module consists of some basic modules which correspond to the process to be simulated or to its specific purpose. Besides the code structure based on the physical modelling, the code follows four strictly separated steps during the course of a calculation: (1) input of structure, geometrical data, initial and boundary condition, (2) initialization of derived quantities, (3) steady state calculation or input of restart data, and (4) transient calculation. In this paper, the transient solution method is briefly presented and the coupling methods are discussed. Three aspects have to be considered for the coupling of different modules in one code system. First is the conservation of masses and energy in the different subsystems as there are fluid, structures, and fission products and aerosols. Second is the convergence of the numerical solution and stability of the calculation. The third aspect is related to the code performance, and running time.

  7. The Nuremberg Code subverts human health and safety by requiring animal modeling

    OpenAIRE

    Greek Ray; Pippus Annalea; Hansen Lawrence A

    2012-01-01

    Abstract Background The requirement that animals be used in research and testing in order to protect humans was formalized in the Nuremberg Code and subsequent national and international laws, codes, and declarations. Discussion We review the history of these requirements and contrast what was known via science about animal models then with what is known now. We further analyze the predictive...

  8. 21 CFR 206.10 - Code imprint required.

    Science.gov (United States)

    2010-04-01

    ... identification than a symbol or logo by itself. Homeopathic drug products are required only to bear an imprint that identifies the manufacturer and their homeopathic nature. (b) A holder of an approved...

  9. Proceedings of the OECD/CSNI workshop on transient thermal-hydraulic and neutronic codes requirements

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, D.

    1997-07-01

    This is a report on the CSNI Workshop on Transient Thermal-Hydraulic and Neutronic Codes Requirements held at Annapolis, Maryland, USA November 5-8, 1996. This experts` meeting consisted of 140 participants from 21 countries; 65 invited papers were presented. The meeting was divided into five areas: (1) current and prospective plans of thermal hydraulic codes development; (2) current and anticipated uses of thermal-hydraulic codes; (3) advances in modeling of thermal-hydraulic phenomena and associated additional experimental needs; (4) numerical methods in multi-phase flows; and (5) programming language, code architectures and user interfaces. The workshop consensus identified the following important action items to be addressed by the international community in order to maintain and improve the calculational capability: (a) preserve current code expertise and institutional memory, (b) preserve the ability to use the existing investment in plant transient analysis codes, (c) maintain essential experimental capabilities, (d) develop advanced measurement capabilities to support future code validation work, (e) integrate existing analytical capabilities so as to improve performance and reduce operating costs, (f) exploit the proven advances in code architecture, numerics, graphical user interfaces, and modularization in order to improve code performance and scrutibility, and (g) more effectively utilize user experience in modifying and improving the codes.

  10. Proceedings of the OECD/CSNI workshop on transient thermal-hydraulic and neutronic codes requirements

    International Nuclear Information System (INIS)

    This is a report on the CSNI Workshop on Transient Thermal-Hydraulic and Neutronic Codes Requirements held at Annapolis, Maryland, USA November 5-8, 1996. This experts' meeting consisted of 140 participants from 21 countries; 65 invited papers were presented. The meeting was divided into five areas: (1) current and prospective plans of thermal hydraulic codes development; (2) current and anticipated uses of thermal-hydraulic codes; (3) advances in modeling of thermal-hydraulic phenomena and associated additional experimental needs; (4) numerical methods in multi-phase flows; and (5) programming language, code architectures and user interfaces. The workshop consensus identified the following important action items to be addressed by the international community in order to maintain and improve the calculational capability: (a) preserve current code expertise and institutional memory, (b) preserve the ability to use the existing investment in plant transient analysis codes, (c) maintain essential experimental capabilities, (d) develop advanced measurement capabilities to support future code validation work, (e) integrate existing analytical capabilities so as to improve performance and reduce operating costs, (f) exploit the proven advances in code architecture, numerics, graphical user interfaces, and modularization in order to improve code performance and scrutibility, and (g) more effectively utilize user experience in modifying and improving the codes

  11. Quality Requirements for College Students Majored in Bar Management%酒吧经营管理对大学生素质能力要求分析

    Institute of Scientific and Technical Information of China (English)

    邓军华; 邵周葛

    2014-01-01

    The bar is an important part of the hotel services , plays an important role in the guest services .Along with the devel-opment of bar industry , increasingly fierce competition , it is evitable for bar workers to improve their qualities for which not only re-quire the basic skills for bar service but also ability of social communication and thinking .It also requires higher professional quality and comprehensive ability .for hotel management students .%酒吧是酒店服务的一个重要组成部分,在对客服务中起着举足轻重的作用。伴随着酒吧业的不断发展,竞争越来越激烈,对于酒吧从业者的要求也越来越高,不仅需要掌握酒吧酒水操作服务基本技能,还要具备一定的社交能力和思维理解能力,这也要求酒店管理专业大学生具备更高的专业素质和综合能力。

  12. Identification and Analysis of Critical Gaps in Nuclear Fuel Cycle Codes Required by the SINEMA Program

    International Nuclear Information System (INIS)

    The current state of the art in nuclear fuel cycle (NFC) modeling is an eclectic mixture of codes with various levels of applicability, flexibility, and availability. In support of the advanced fuel cycle systems analyses, especially those by the Advanced Fuel Cycle Initiative (AFCI), University of Cincinnati in collaboration with Idaho State University carried out a detailed review of the existing codes describing various aspects of the nuclear fuel cycle and identified the research and development needs required for a comprehensive model of the global nuclear energy infrastructure and the associated nuclear fuel cycles. Relevant information obtained on the NFC codes was compiled into a relational database that allows easy access to various codes' properties. Additionally, the research analyzed the gaps in the NFC computer codes with respect to their potential integration into programs that perform comprehensive NFC analysis.

  13. Identification and Analysis of Critical Gaps in Nuclear Fuel Cycle Codes Required by the SINEMA Program

    Energy Technology Data Exchange (ETDEWEB)

    Adrian Miron; Joshua Valentine; John Christenson; Majd Hawwari; Santosh Bhatt; Mary Lou Dunzik-Gougar: Michael Lineberry

    2009-10-01

    The current state of the art in nuclear fuel cycle (NFC) modeling is an eclectic mixture of codes with various levels of applicability, flexibility, and availability. In support of the advanced fuel cycle systems analyses, especially those by the Advanced Fuel Cycle Initiative (AFCI), Unviery of Cincinnati in collaboration with Idaho State University carried out a detailed review of the existing codes describing various aspects of the nuclear fuel cycle and identified the research and development needs required for a comprehensive model of the global nuclear energy infrastructure and the associated nuclear fuel cycles. Relevant information obtained on the NFC codes was compiled into a relational database that allows easy access to various codes' properties. Additionally, the research analyzed the gaps in the NFC computer codes with respect to their potential integration into programs that perform comprehensive NFC analysis.

  14. The Nuremberg Code subverts human health and safety by requiring animal modeling

    Directory of Open Access Journals (Sweden)

    Greek Ray

    2012-07-01

    Full Text Available Abstract Background The requirement that animals be used in research and testing in order to protect humans was formalized in the Nuremberg Code and subsequent national and international laws, codes, and declarations. Discussion We review the history of these requirements and contrast what was known via science about animal models then with what is known now. We further analyze the predictive value of animal models when used as test subjects for human response to drugs and disease. We explore the use of animals for models in toxicity testing as an example of the problem with using animal models. Summary We conclude that the requirements for animal testing found in the Nuremberg Code were based on scientifically outdated principles, compromised by people with a vested interest in animal experimentation, serve no useful function, increase the cost of drug development, and prevent otherwise safe and efficacious drugs and therapies from being implemented.

  15. 标刻在金属零件上的二维条码数据提取方法%2-D Bar Code Data Extraction on Metal Parts

    Institute of Scientific and Technical Information of China (English)

    王伟; 何卫平; 雷蕾; 林清松; 李夏霜

    2012-01-01

    针对金属零件上二维条码光照分布不均、点扩散、对比度低与污染干扰等问题,提出一种基于原灰度图像小区域相邻模块对比提取二维条码数据的算法.首先通过峰度值排序法及模块区域微调法由粗到精定位每个二维条码模块位置,然后基于原灰度图像利用遗传算法提取二维条码的数据信息,得到最终的提取结果.与传统二维条码数据提取算法的实验结果证明,该算法对于复杂金属背景上的二维条码识读具有更高的可靠性.%This paper describes a 2D bar code extraction approach that is capable of processing pictures of 2D bar codes on metal parts with uneven distribution of light intensity, point spread, low contrast and pollution interference. The algorithm uses kurtosis value-sorting and module area fine tuning to locate each module's position which is detected from coarse-level to fine-level, then the final extraction data of 2D bar code is obtained by a genetic algorithm based on the original gray-scale image. Compared with traditional methods, the proposed algorithm has higher reliability for 2D bar code extraction on complex metal parts.

  16. Investigative study on the technical code requirements of natural events hazards for nuclear power plants

    International Nuclear Information System (INIS)

    Technical codes and standards on natural phenomena, in particular, earthquake and tsunami for nuclear power plants in the other developed countries including IAEA safety standards were investigated. Then, the results were compared with the corresponding Japanese technical codes and standards. As a results, it was found that: (1) technical codes and standards on natural phenomena, especially those for earthquakes and tsunami/flooding in those foreign countries and their requirements are all included in the Japanese technical codes and standards. (2) Nevertheless, the actual measures against tsunami/flooding in those foreign countries are more advanced than those in Japan which had been taken before Fukushima accident. Therefore, further investigation is needed to clarify the reason why there are such differences by investigating the details of the basic ideas and evaluation methods for the protection of tsunami/flooding. (author)

  17. BEIJING BARS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Cappuccino Bar Cappuccino Bar, at the intersection of Dongzhimenwai Dajie and Sanlitun Beijie, Beijing's most vibrant nightlife area, is a hot new destination for European food lovers. With its perfect combination of both energy and tranquility, and surrounded by diplomatic compounds, it is conveniently located near other Beijing destinations including Lady Street

  18. Comparison of 2006 IECC and 2009 IECC Commercial Energy Code Requirements for Kansas City, MO

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Yunzhi; Gowri, Krishnan

    2011-03-22

    This report summarizes code requirements and energy savings of commercial buildings in climate zone 4 built to the 2009 IECC when compared to the 2006 IECC. In general, the 2009 IECC has higher insulation requirements for exterior walls, roof, and windows and have higher efficiency requirements for HVAC equipment (HVAC equipment efficiency requirements are governed by National Appliance Conversion Act of 1987 (NAECA), and are applicable irrespective of the IECC version adopted). The energy analysis results show that residential and nonresidential commercial buildings meeting the 2009 IECC requirements save between 6.1% and 9.0% site energy, and between 6.4% and 7.7% energy cost when compared to 2006 IECC. Analysis also shows that semiheated buildings have energy and cost savings of 3.9% and 5.6%.

  19. Input data requirements for special processors in the computation system containing the VENTURE neutronics code

    International Nuclear Information System (INIS)

    User input data requirements are presented for certain special processors in a nuclear reactor computation system. These processors generally read data in formatted form and generate binary interface data files. Some data processing is done to convert from the user oriented form to the interface file forms. The VENTURE diffusion theory neutronics code and other computation modules in this system use the interface data files which are generated

  20. Texas State Building Energy Code: Analysis of Potential Benefits and Costs of Commercial Lighting Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Richman, Eric E.; Belzer, David B.; Winiarski, David W.

    2005-09-15

    The State Energy Conservation Office of Texas has asked the U.S. Department of Energy to analyze the potential energy effect and cost-effectiveness of the lighting requirements in the 2003 IECC as they consider adoption of this energy code. The new provisions of interest in the lighting section of IECC 2003 include new lighting power densities (LPD) and requirements for automatic lighting shutoff controls. The potential effect of the new LPD values is analyzed as a comparison with previous values in the nationally available IECC codes and ASHRAE/IESNA 90.1. The basis for the analysis is a set of lighting models developed as part of the ASHRAE/IES code process, which is the basis for IECC 2003 LPD values. The use of the models allows for an effective comparison of values for various building types of interest to Texas state. Potential effects from control requirements are discussed, and available case study analysis results are provided but no comprehensive numerical evaluation is provided in this limited analysis effort.

  1. QR Codes 101

    Science.gov (United States)

    Crompton, Helen; LaFrance, Jason; van 't Hooft, Mark

    2012-01-01

    A QR (quick-response) code is a two-dimensional scannable code, similar in function to a traditional bar code that one might find on a product at the supermarket. The main difference between the two is that, while a traditional bar code can hold a maximum of only 20 digits, a QR code can hold up to 7,089 characters, so it can contain much more…

  2. 基于ARM的物品精准定位和二维条码扫描系统设计%Design of Scanning Two-Dimensional Bar Code and Precise Positioning System Based on ARM

    Institute of Scientific and Technical Information of China (English)

    姚立; 刘幺和

    2012-01-01

    GPS positioning and two-dimensional bar code scanning system based on ARM is presented, using the linux operating system and the associated software is provided. System can tin ly locate the positon of the goods on the transporting way and timely read the infor-mation in the two-dimensional code of the goods. Thereby increasing the efficiency of the system.%文章提出了一种以嵌入式ARM为核心,以GPS定位和二维条码扫描为基础的系统,采用Linux操作系统,并给出了相关的软件程序设计.系统可以在物品运输的途中实时的定位,并且还可以实时的了解物品上二维码的信息,从而提高了系统的效率.

  3. Energy Efficiency Requirements in Building Codes, Energy Efficiency Policies for New Buildings. IEA Information Paper

    Energy Technology Data Exchange (ETDEWEB)

    Laustsen, Jens

    2008-03-15

    The aim of this paper is to describe and analyse current approaches to encourage energy efficiency in building codes for new buildings. Based on this analysis the paper enumerates policy recommendations for enhancing how energy efficiency is addressed in building codes and other policies for new buildings. This paper forms part of the IEA work for the G8 Gleneagles Plan of Action. These recommendations reflect the study of different policy options for increasing energy efficiency in new buildings and examination of other energy efficiency requirements in standards or building codes, such as energy efficiency requirements by major renovation or refurbishment. In many countries, energy efficiency of buildings falls under the jurisdiction of the federal states. Different standards cover different regions or climatic conditions and different types of buildings, such as residential or simple buildings, commercial buildings and more complicated high-rise buildings. There are many different building codes in the world and the intention of this paper is not to cover all codes on each level in all countries. Instead, the paper details different regions of the world and different ways of standards. In this paper we also evaluate good practices based on local traditions. This project does not seek to identify one best practice amongst the building codes and standards. Instead, different types of codes and different parts of the regulation have been illustrated together with examples on how they have been successfully addressed. To complement this discussion of efficiency standards, this study illustrates how energy efficiency can be improved through such initiatives as efficiency labelling or certification, very best practice buildings with extremely low- or no-energy consumption and other policies to raise buildings' energy efficiency beyond minimum requirements. When referring to the energy saving potentials for buildings, this study uses the analysis of recent IEA

  4. 二维码技术在高校智能化管理中的应用探讨%The Application of Two-dimensional Bar Code Technology to University Intelligence Management

    Institute of Scientific and Technical Information of China (English)

    马莉

    2012-01-01

    Two-dimensional bar code technology has been widely applied to a variety of departments and industries due to its informative feature, high confidentiality and security, low cost, easy fabrication, high reliability of deco- ding and ability to resist damage and correct errors. This article probes into the application of two-dimensional bar code technology to campus safety, library, archives information, students and large equipment management in univer- sities, which provides a new thought on research for the smart campus construction.%二维条码技术以信息容量大、保密好和防伪性高、成本低廉且容易制造、译码可靠率高、抗损纠错能力强等特点已经开始普遍应用于各个部门和行业中。探讨了二维码技术在高校校园安全、图书馆、档案信息、学生、大型设备管理方面的应用,为高校智能校园建设提供了新的研究思路。

  5. Technical support document for proposed revision of the model energy code thermal envelope requirements

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C.C.; Lucas, R.G.

    1993-02-01

    This report documents the development of the proposed revision of the council of American Building Officials` (CABO) 1993 supplement to the 1992 Model Energy Code (MEC) (referred to as the 1993 MEC) building thermal envelope requirements for single-family and low-rise multifamily residences. The goal of this analysis was to develop revised guidelines based on an objective methodology that determined the most cost-effective (least total life-cycle cost [LCC]) combination of energy conservation measures (ECMs) for residences in different locations. The ECMs with the lowest LCC were used as a basis for proposing revised MEC maximum U{sub o}-value (thermal transmittance) curves in the MEC format. The changes proposed here affect the requirements for ``group R`` residences. The group R residences are detached one- and two-family dwellings (referred to as single-family) and all other residential buildings three stories or less (referred to as multifamily).

  6. Technical support document for proposed revision of the model energy code thermal envelope requirements

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C.C.; Lucas, R.G.

    1993-02-01

    This report documents the development of the proposed revision of the council of American Building Officials' (CABO) 1993 supplement to the 1992 Model Energy Code (MEC) (referred to as the 1993 MEC) building thermal envelope requirements for single-family and low-rise multifamily residences. The goal of this analysis was to develop revised guidelines based on an objective methodology that determined the most cost-effective (least total life-cycle cost [LCC]) combination of energy conservation measures (ECMs) for residences in different locations. The ECMs with the lowest LCC were used as a basis for proposing revised MEC maximum U[sub o]-value (thermal transmittance) curves in the MEC format. The changes proposed here affect the requirements for group R'' residences. The group R residences are detached one- and two-family dwellings (referred to as single-family) and all other residential buildings three stories or less (referred to as multifamily).

  7. From Requirements to code: an Architecture-centric Approach for producing Quality Systems

    CERN Document Server

    Bucchiarone, Antonio; Muccini, Henry; Pelliccione, Patrizio

    2009-01-01

    When engineering complex and distributed software and hardware systems (increasingly used in many sectors, such as manufacturing, aerospace, transportation, communication, energy, and health-care), quality has become a big issue, since failures can have economics consequences and can also endanger human life. Model-based specifications of a component-based system permit to explicitly model the structure and behaviour of components and their integration. In particular Software Architectures (SA) has been advocated as an effective means to produce quality systems. In this chapter by combining different technologies and tools for analysis and development, we propose an architecture-centric model-driven approach to validate required properties and to generate the system code. Functional requirements are elicited and used for identifying expected properties the architecture shall express. The architectural compliance to the properties is formally demonstrated, and the produced architectural model is used to automa...

  8. GFRP Bar: Determining Tensile Strength with Bending Test

    OpenAIRE

    Almerich Chulia, Ana Isabel; Fenollosa Forner, Ernesto Jesús; Cabrera Fausto, Ivan

    2015-01-01

    In order to obtain GFRP reinforcement bars it is necessary to undertake tests regulated code which require important mechanical tools. This paper presents a method which allows for determining GFRP rebars tensile strength value from their flexural strength value which has been obtained with a simple, inexpensive and reliable test. This method results will be verified by applying it to values obtained in a series of bending tests and comparing these results with values obtained in tensile test...

  9. Requirements for imaging vulnerable plaque in the coronary artery using a coded aperture imaging system

    Science.gov (United States)

    Tozian, Cynthia

    A coded aperture1 plate was employed on a conventional gamma camera for 3D single photon emission computed tomography (SPECT) imaging on small animal models. The coded aperture design was selected to improve the spatial resolution and decrease the minimum detectable activity (MDA) required to image plaque formation in the APoE (apolipoprotein E) gene deficient mouse model when compared to conventional SPECT techniques. The pattern that was tested was a no-two-holes-touching (NTHT) modified uniformly redundant array (MURA) having 1,920 pinholes. The number of pinholes combined with the thin sintered tungsten plate was designed to increase the efficiency of the imaging modality over conventional gamma camera imaging methods while improving spatial resolution and reducing noise in the image reconstruction. The MDA required to image the vulnerable plaque in a human cardiac-torso mathematical phantom was simulated with a Monte Carlo code and evaluated to determine the optimum plate thickness by a receiver operating characteristic (ROC) yielding the lowest possible MDA and highest area under the curve (AUC). A partial 3D expectation maximization (EM) reconstruction was developed to improve signal-to-noise ratio (SNR), dynamic range, and spatial resolution over the linear correlation method of reconstruction. This improvement was evaluated by imaging a mini hot rod phantom, simulating the dynamic range, and by performing a bone scan of the C-57 control mouse. Results of the experimental and simulated data as well as other plate designs were analyzed for use as a small animal and potentially human cardiac imaging modality for a radiopharmaceutical developed at Bristol-Myers Squibb Medical Imaging Company, North Billerica, MA, for diagnosing vulnerable plaques. If left untreated, these plaques may rupture causing sudden, unexpected coronary occlusion and death. The results of this research indicated that imaging and reconstructing with this new partial 3D algorithm improved

  10. Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Kansas City, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, Robert G.

    2011-09-30

    The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the 2006 IECC. The notable changes are: (1) Improved duct sealing verified by testing the duct system; (2) Increased duct insulation; (3) Improvement of window U-factors from 0.40 to 0.35; and (4) Efficient lighting requirements. An analysis of these changes resulted in estimated annual energy cost savings of about $145 a year for an average new house. Construction cost increases are estimated at $655. Home owners will experience an annual cost savings of close to $100 a year because reduction to energy bills will more than compensate for increased mortgage payments and other costs.

  11. Breaking through the Bar

    Science.gov (United States)

    Gray, Katti

    2011-01-01

    Howard University School of Law had a problem, and school officials knew it. Over a 20-year period, 40 percent of its graduates who took the Maryland bar exam failed it on their first try. During the next 24 months--the time frame required to determine its "eventual pass rate"--almost 90 percent of the students did pass. What they did not know was…

  12. Bar dimensions and bar shapes in estuaries

    Science.gov (United States)

    Leuven, Jasper; Kleinhans, Maarten; Weisscher, Steven; van der Vegt, Maarten

    2016-04-01

    Estuaries cause fascinating patterns of dynamic channels and shoals. Intertidal sandbars are valuable habitats, whilst channels provide access to harbors. We still lack a full explanation and classification scheme for the shapes and dimensions of bar patterns in natural estuaries, in contrast with bars in rivers. Analytical physics-based models suggest that bar length in estuaries increases with flow velocity, tidal excursion length or estuary width, depending on which model. However, these hypotheses were never validated for lack of data and experiments. We present a large dataset and determine the controls on bar shape and dimensions in estuaries, spanning bar lengths from centimeters (experiments) to 10s of kilometers length. First, we visually identified and classified 190 bars, measured their dimensions (width, length, height) and local braiding index. Data on estuarine geometry and tidal characteristics were obtained from governmental databases and literature on case studies. We found that many complex bars can be seen as simple elongated bars partly cut by mutually evasive ebb- and flood-dominated channels. Data analysis shows that bar dimensions scale with estuary dimensions, in particular estuary width. Breaking up the complex bars in simple bars greatly reduced scatter. Analytical bar theory overpredicts bar dimensions by an order of magnitude in case of small estuarine systems. Likewise, braiding index depends on local width-to-depth ratio, as was previously found for river systems. Our results suggest that estuary dimensions determine the order of magnitude of bar dimensions, while tidal characteristics modify this. We will continue to model bars numerically and experimentally. Our dataset on tidal bars enables future studies on the sedimentary architecture of geologically complex tidal deposits and enables studying effects of man-induced perturbations such as dredging and dumping on bar and channel patterns and habitats.

  13. Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Mesa, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, Robert G.

    2011-03-31

    The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the 2006 IECC and the 2003 IECC. The notable changes are: (1) Improved duct sealing verified by testing the duct system; (2) Increased duct insulation; (3) Improvement of window U-factors from 0.40 to 0.35; and (4) Efficient lighting requirements. An analysis of these changes resulted in estimated annual energy cost savings of $145 a year for an average new house compared to the 2003 IECC. This energy cost saving decreases to $125 a year for the 2009 IECC compared to the 2006 IECC. Construction cost increases (per home) for complying with the 2009 IECC are estimated at $1256 relative to the 2003 IECC and $800 for 2006 IECC. Home owners will experience an annual cost savings of about $80 a year by complying with the 2009 IECC because reduction to energy bills will more than compensate for increased mortgage payments and other costs.

  14. Codes and Standards Requirements for Deployment of Emerging Fuel Cell Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Burgess, R.; Buttner, W.; Riykin, C.

    2011-12-01

    The objective of this NREL report is to provide information on codes and standards (of two emerging hydrogen power fuel cell technology markets; forklift trucks and backup power units), that would ease the implementation of emerging fuel cell technologies. This information should help project developers, project engineers, code officials and other interested parties in developing and reviewing permit applications for regulatory compliance.

  15. RELAP5/MOD3 code manual: User's guide and input requirements. Volume 2

    International Nuclear Information System (INIS)

    The RELAP5 code has been developed for best estimate transient simulation of light water reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents, and operational transients, such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems. Control system and secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems. Volume II contains detailed instructions for code application and input data preparation

  16. RELAP5/MOD3 code manual: User`s guide and input requirements. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The RELAP5 code has been developed for best estimate transient simulation of light water reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents, and operational transients, such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems. Control system and secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems. Volume II contains detailed instructions for code application and input data preparation.

  17. Michigan State Code Adoption Analysis: Cost-Effectiveness of Lighting Requirements - ASHRAE/IESNA 90.1-2004

    Energy Technology Data Exchange (ETDEWEB)

    Richman, Eric E.

    2006-09-29

    This report documents PNNL's analysis of the potential energy effect and cost-effectiveness of the lighting requirements in ASHRAE/IESNA 90.1-2004 if this energy code is adopted in the state of Michigan, instead of the current standard.

  18. Comparison of seismic actions and structural design requirements in Chinese Code GB 50011 and International Standard ISO 3010

    Institute of Scientific and Technical Information of China (English)

    王亚勇

    2004-01-01

    This paper presents a comparison between the Chinese Code GB50011-2001 and the International Standard ISO3010: 2001(E), emphasizing the similarities and differences related to design requirements, seismic actions and analytical approaches. Similarities include: earthquake return period, conceptual design, site classification, structural strength and ductility requirements, deformation limits, response spectra, seismic analysis procedures, isolation and energy dissipation,and nonstructural elements. Differences exist in the following areas: seismic levels, earthquake loading, mode damping factors and structural control.

  19. TASS/SMR Code Topical Report for SMART Plant, Vol II: User's Guide and Input Requirement

    Energy Technology Data Exchange (ETDEWEB)

    Kim, See Darl; Kim, Soo Hyoung; Kim, Hyung Rae (and others)

    2008-10-15

    The TASS/SMR code has been developed with domestic technologies for the safety analysis of the SMART plant which is an integral type pressurized water reactor. It can be applied to the analysis of design basis accidents including non-LOCA (loss of coolant accident) and LOCA of the SMART plant. The TASS/SMR code can be applied to any plant regardless of the structural characteristics of a reactor since the code solves the same governing equations for both the primary and secondary system. The code has been developed to meet the requirements of the safety analysis code. This report describes the overall structure of the TASS/SMR, input processing, and the processes of a steady state and transient calculations. In addition, basic differential equations, finite difference equations, state relationships, and constitutive models are described in the report. First, the conservation equations, a discretization process for numerical analysis, search method for state relationship are described. Then, a core power model, heat transfer models, physical models for various components, and control and trip models are explained.

  20. Coding strategies in number space : Memory requirements influence spatial-numerical associations

    NARCIS (Netherlands)

    Lindemann, Oliver; Abolafia, Juan M.; Pratt, Jay; Bekkering, Harold

    2008-01-01

    The tendency to respond faster with the left hand to relatively small numbers and faster with the right hand to relatively large numbers (spatial numerical association of response codes, SNARC effect) has been interpreted as an automatic association of spatial and numerical information. We investiga

  1. Development of realistic thermal-hydraulic system analysis codes ; development of thermal hydraulic test requirements for multidimensional flow modeling

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Kune Yull; Yoon, Sang Hyuk; Noh, Sang Woo; Lee, Il Suk [Seoul National University, Seoul (Korea)

    2002-03-01

    This study is concerned with developing a multidimensional flow model required for the system analysis code MARS to more mechanistically simulate a variety of thermal hydraulic phenomena in the nuclear stem supply system. The capability of the MARS code as a thermal hydraulic analysis tool for optimized system design can be expanded by improving the current calculational methods and adding new models. In this study the relevant literature was surveyed on the multidimensional flow models that may potentially be applied to the multidimensional analysis code. Research items were critically reviewed and suggested to better predict the multidimensional thermal hydraulic behavior and to identify test requirements. A small-scale preliminary test was performed in the downcomer formed by two vertical plates to analyze multidimensional flow pattern in a simple geometry. The experimental result may be applied to the code for analysis of the fluid impingement to the reactor downcomer wall. Also, data were collected to find out the controlling parameters for the one-dimensional and multidimensional flow behavior. 22 refs., 40 figs., 7 tabs. (Author)

  2. Barred Owl [ds8

    Data.gov (United States)

    California Department of Resources — These data define the current range of Barred and hybrid Barred/Spotted Owls in California. The current range includes the coastal mountains of northern California...

  3. DNA Bar-Coding for Phytoplasma Identification

    DEFF Research Database (Denmark)

    Makarova, Olga; Contaldo, Nicoletta; Paltrinieri, Samanta;

    2013-01-01

    Phytoplasma identi fi cation has proved dif fi cult due to their inability to be maintained in vitro. DNA barcoding is an identi fi cation method based on comparison of a short DNA sequence with known sequences from a database. A DNA barcoding tool has been developed for phytoplasma identi fi cat...

  4. 基于红外条码的盲人扑克游戏辅助仪的设计%Design and implementation of blind poker game auxiliary instrument based on infrared scanning bar code

    Institute of Scientific and Technical Information of China (English)

    景亚霓; 杨海平

    2014-01-01

    The paper designs a blind poker game auxiliary instrument based on bar code technology, embedded system and voice chip technology. The instrument has the characteristics of compact structure , simple and convenient operation and embed popular poker game program, thus users can conveniently select the type of game according to their interest. Its main feature is that it can broadcast information that others played poker and supplies situation of yourself poker in hands by earplug if need. The auxiliary instrument makes the blind to get poke information by "listen" instead of "touch", so that blind and low vision people can play cards as a normal person even if he does not know Braille. In other hand, some problem can be avoided, such as mistake of player distinguishing Braille.%设计了一款基于集条形码技术、嵌入式系统及语音芯片技术于一体、结构紧凑、操作简单方便的盲人扑克游戏辅助仪。该装置设计了常见的扑克游戏程序,使用者可根据兴趣方便地选择游戏种类。其主要特点是利用语音技术能够实时播报其他人的出牌信息并可根据需要耳机播报本人手中牌的信息,让盲人用“听”牌代替了“摸”牌,使盲人以及不懂盲文的低视力人群能像正常人一样打扑克、玩桥牌等,克服了现有低视力群体打牌游戏中常见的问题,如盲文识别错误等。

  5. On Modified Bar recursion

    DEFF Research Database (Denmark)

    Oliva, Paulo Borges

    2002-01-01

    Modified bar recursion is a variant of Spector's bar recursion which can be used to give a realizability interpretation of the classical axiom of dependent choice. This realizability allows for the extraction of witnesses from proofs of forall-exists-formulas in classical analysis. In this talk I...... shall report on results regarding the relationship between modified and Spector's bar recursion. I shall also show that a seemingly weak form of modified bar recursion is as strong as "full" modified bar recursion in higher types....

  6. Observation of B0bar --> D0 K0bar and B0bar --> D0 K*0bar decays

    CERN Document Server

    Krokovnyi, P P

    2003-01-01

    We report on a search for B0bar --> D0 K(*)0bar decays based on 85 10^6 BBar events collected with the Belle detector at KEKB. The B0bar --> D0 K0bar and B0bar --> D0 K*0bar decays have been observed for the first time with the branching fractions Br(B0bar --> D0 K0bar) = (5.0^{+1.3}_{-1.2}+- 0.6) 10^{-5} and Br(B0bar --> D0 K*0bar) = (4.8^{+1.1}_{-1.0}+- 0.5) 10^{-5}. No significant signal has been found for the B0bar --> D*0 K(*)0bar and B0bar --> D(*)0bar K*0bar decay modes, and upper limits at 90% CL are presented.

  7. 10 CFR 39.49 - Uranium sinker bars.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Uranium sinker bars. 39.49 Section 39.49 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.49 Uranium sinker bars. The licensee may use a uranium sinker bar in well logging applications only if it is...

  8. Computerized mega code recording.

    Science.gov (United States)

    Burt, T W; Bock, H C

    1988-04-01

    A system has been developed to facilitate recording of advanced cardiac life support mega code testing scenarios. By scanning a paper "keyboard" using a bar code wand attached to a portable microcomputer, the person assigned to record the scenario can easily generate an accurate, complete, timed, and typewritten record of the given situations and the obtained responses. PMID:3354937

  9. Testing, licensing, and code requirements for seismic isolation systems (for nuclear power plants)

    Energy Technology Data Exchange (ETDEWEB)

    Seidensticker, R.W.

    1987-01-01

    The use of seismic isolation as an earthquake hazard mitigation strategy for nuclear reactor power plants is rapidly receiving interest throughout the world. Seismic isolation has already been used on at least two French PWR plants, was to have been used for plants to be built in Iran, and is under serious consideration for advanced LMR plants (in the US, UK, France, and Japan). In addition, there is a growing use of seismic isolation throughout the world for other critical facilities such as hospitals, emergency facilities, buildings with very high-cost equipment (e.g., computers) and as a strategy to reduce loss of life and expensive equipment in earthquakes. Such a design approach is in complete contrast to the conventional seismic design strategy in which the structure and components are provided with sufficient strength and ductility to resist the earthquake forces and to prevent structural collapses or failure. The use of seismic isolation for nuclear plants can, therefore, be expected to be a significant licensing issue. For isolation, the licensing process must shift away in large measure from the superstructure and concentrate on the behavior of the seismic isolation system. This paper is not intended to promote the advantages of seismic isolation system, but to explore in some detail those technical issues which must be satisfactorily addressed to achieve full licensability of the use of seismic isolation as a viable, attractive and economical alternative to current traditional design approaches. Special problems and topics associated with testing and codes and standards development are addressed. A positive program for approach or strategy to secure licensing is presented.

  10. Radiation sterilization of tissue allografts: Requirements for validation and routine control. A code of practice

    International Nuclear Information System (INIS)

    These recommendations for the radiation sterilization of tissue allografts adopt the principles that the International Organization for Standardization (ISO) applies to the radiation sterilization of health care products. The approach has been adapted to take into account the special features associated with human tissues and the features that distinguish them from industrially produced sterile health care products. The approach as described here is not applicable if viral contamination is identified. Thus it is emphasized that the human donors of the tissues must be medically and serologically screened. To further support this screening it is recommended that autopsy reports be reviewed if available. This adaptation of established ISO methods can thus only be applied to sterilization of tissue allografts if the radiation sterilization described here is the terminal stage of a careful, detailed, documented sequence of procedures involving: donor selection; tissue retrieval; tissue banking general procedures; specific processing procedures; labelling; and distribution. The methods proposed here for the establishment of a sterilization dose are based on statistical approaches used for the sterilization of health care products and modified appropriately for the low numbers of tissue allograft samples typically available. This code of practice will be useful to tissue banking staff, surgeons using tissues for transplantation, regulators who oversee the safety of transplantation and radiation sterilization procedures, members of tissue banking associations, health service personnel in hospitals in which tissue transplantations are performed and inter-governmental organizations involved in transplantation issues, for example the World Health Organization. This publication was discussed extensively at an international meeting in Wrexham in the United Kingdom and was approved by the Technical Advisory Committee of the relevant IAEA project, which included the Chairpersons

  11. The four bars problem

    Science.gov (United States)

    Mauroy, Alexandre; Taslakian, Perouz; Langerman, Stefan; Jungers, Raphaël

    2016-09-01

    A four-bar linkage is a mechanism consisting of four rigid bars which are joined by their endpoints in a polygonal chain and which can rotate freely at the joints (or vertices). We assume that the linkage lies in the 2-dimensional plane so that one of the bars is held horizontally fixed. In this paper we consider the problem of reconfiguring a four-bar linkage using an operation called a pop. Given a four-bar linkage, a pop reflects a vertex across the line defined by its two adjacent vertices along the polygonal chain. Our main result shows that for certain conditions on the lengths of the bars, the neighborhood of any configuration that can be reached by smooth motion can also be reached by pops. The proof relies on the fact that pops are described by a map on the circle with an irrational number of rotation.

  12. Structural Behavior of Concrete Beams Reinforced with Basalt Fiber Reinforced Polymer (BFRP) Bars

    Science.gov (United States)

    Ovitigala, Thilan

    The main challenge for civil engineers is to provide sustainable, environmentally friendly and financially feasible structures to the society. Finding new materials such as fiber reinforced polymer (FRP) material that can fulfill the above requirements is a must. FRP material was expensive and it was limited to niche markets such as space shuttles and air industry in the 1960s. Over the time, it became cheaper and spread to other industries such as sporting goods in the 1980-1990, and then towards the infrastructure industry. Design and construction guidelines are available for carbon fiber reinforced polymer (CFRP), aramid fiber reinforced polymer (AFRP) and glass fiber reinforced polymer (GFRP) and they are currently used in structural applications. Since FRP is linear elastic brittle material, design guidelines for the steel reinforcement are not valid for FRP materials. Corrosion of steel reinforcement affects the durability of the concrete structures. FRP reinforcement is identified as an alternative to steel reinforcement in corrosive environments. Although basalt fiber reinforced polymer (BFRP) has many advantages over other FRP materials, but limited studies have been done. These studies didn't include larger BFRP bar diameters that are mostly used in practice. Therefore, larger beam sizes with larger BFRP reinforcement bar diameters are needed to investigate the flexural and shear behavior of BFRP reinforced concrete beams. Also, shear behavior of BFRP reinforced concrete beams was not yet studied. Experimental testing of mechanical properties and bond strength of BFRP bars and flexural and shear behavior of BFRP reinforced concrete beams are needed to include BFRP reinforcement bars in the design codes. This study mainly focuses on the use of BFRP bars as internal reinforcement. The test results of the mechanical properties of BFRP reinforcement bars, the bond strength of BFRP reinforcement bars, and the flexural and shear behavior of concrete beams

  13. 铜排连续挤压力能的工程法计算%Calculation of Pressure and Power Required by Continuous Extrusion of Copper Bus Bar by Slab Method

    Institute of Scientific and Technical Information of China (English)

    于孟; 代娜娜; 钟毅

    2012-01-01

    The pressure and power required by continuous extrusion of copper bus bar was calculated and the analytical expression of the inlet stress of the extending mould was obtained herein. The analytical expression shows the rules of the pressure changing with the variation of thickness and flakiness ratio of products. Taking the torque caused by flash of metal and plug into account, the power required by continuous extrusion of copper bus bar with a specification of 204. 5mm × 7. 5mm was calculated by employing the proposed method, and the results show good agreement with the experimental values. The error of calculation is 12%, and is able to meet the engineering application. Therefore, the proposed method can provide reference for the design of extrusion mould and rational selection of copper bus bar continuous extrusion machine.%采用工程法对连续挤压铜排的力能进行了计算,得到了连续挤压铜排模腔入口挤压应力的解析表达式及挤压应力随产品厚度和宽厚比变化的规律.考虑到溢料和堵头对挤压轮产生的扭矩,对204.5mm×7.5mm铜排连续挤压的功率进行了计算,并将其与实验中的实测值进行比较,二者误差为12%,能满足工程计算的需要.因此,该方法可为模具设计和合理选择铜排连续挤压设备提供参考.

  14. 应用UCC/EAN-128编码技术对转基因植物产品进行溯源研究%Tracing of genetically modified crops and their derived products by UCC/EAN-128 bar code

    Institute of Scientific and Technical Information of China (English)

    王醒宇; 杨捷琳; 陈勇; 潘良文; 丁卓平

    2013-01-01

    This paper gathered information from the five sections including the planting origin, products category, harvesting, processing and packaging stages. Based on the national standard and coding rules, the tracing of genetically modified crops by UCC/EAN-128 bar code about five sections was designed and encipher. As the example of soybeans, the five sections were combined to make the integrity the UCC/EAN bar code. The consumer can obtain the information and trace the products through scanning the UCC/EAN-128 bar code, combining with the data received and the data from the computer database.%该文对转基因植物产品从产地、产品、采收、加工、包装等5个环节收集信息,并根据国家标准中规定相应编码规则对这5个环节进行UCC/EAN-128码的设计与编码。最后,以大豆为例,将这5个编码结合,形成一个完整UCC/EAN-128码。消费者通过扫描条形码,获取相关数据,并将获得数据与计算机建立的数据库相结合,进行信息读取,了解转基因植物产品的生产、加工、包装等信息,从而对转基因植物产品进行有效的溯源。

  15. Design of Engineering Machinery Accessories of the Logistics Information System Based on Bar Code Technology%基于条形码的工程机械配件管理系统设计

    Institute of Scientific and Technical Information of China (English)

    江静岚; 谭桂芹

    2015-01-01

    Engineering machinery consists of thousands of spare parts and has a complicated list of accesso -ries.The characteristic of machinery manufacture is precision and just -in-time, which has strict acquirement in supply and distribution of accessories .Among the current management methods of accessories , many procedures still follow the traditional manual operating methods which are inefficient and easy to make mistakes .In order to es-tablish the standardized enterprise business processes of construction machinery and standardized basic data , and to enhance efficiency , the system, through the combination of the bar code technology and information processing technology , using the Thinkphp framework , which is based on the PHP language , as a system architecture , have designed and implemented a set of engineering machinery spare parts logistics information system based on barcode technology , ensuring the accuracy of the inventory , optimizing the punctuality of the storage management and deliv-ery of the inventory .And for the characteristic of uniqueness of the spare parts ’ code number , the retrospect and dynamic monitoring of every spare part is accomplished .%工程机械设备是由成千上万的配件组成,配件清单十分复杂,而机械制造生产的特点是精确化、准时化,对配件供应和配送要求十分严格。现行的配件管理方法中,许多步骤仍沿用传统的手工作业方式,效率低下,容易出错。为了更好地建立工程机械配件的标准化业务流程、标准化基础资料,提高效率,该系统通过条码技术与信息处理技术相结合,使用以PHP语言为基础的ThinkPHP框架作为系统架构,设计和实现了一套基于条码技术的机械配件物流信息系统,确保配件和产品库存数量的精确性,优化配件和产品在仓储管理和配送管理的准时性,并能利用配件条码编号的唯一性特点,实现每一个工程机械配件的追

  16. Bar-tailed

    NARCIS (Netherlands)

    Duijns, S.; Hidayati, N.A.; Piersma, T.

    2013-01-01

    Capsule Across the European wintering range Bar-tailed Godwits Limosa lapponica lapponica selected polychaete worms and especially Ragworms Hediste diversicolor, with differences between areas due to variations in prey availability.Aims To determine the diet of Bar-tailed Godwits across their winter

  17. BaBar Data Aquisition

    CERN Document Server

    Scott, I; Grosso, P; Hamilton, R T; Huffer, M E; O'Grady, C; Russell, J J

    1998-01-01

    The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by analysing the decays of a very large sample of B and Bbar mesons produced at the high luminosity PEP-11 accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detector subsystems. Data from the front end electronics is read into commercial VME processors via a custom "personality card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data are read out via a non-blocking network switch to a farm of commercial UNIX processors. Careful design of the core data acquisition code has enabled us to sustain events rates in excess of 20 kHz while maintaini...

  18. The bioinformatics of nucleotide sequence coding for proteins requiring metal coenzymes and proteins embedded with metals

    Science.gov (United States)

    Tremberger, G.; Dehipawala, Sunil; Cheung, E.; Holden, T.; Sullivan, R.; Nguyen, A.; Lieberman, D.; Cheung, T.

    2015-09-01

    All metallo-proteins need post-translation metal incorporation. In fact, the isotope ratio of Fe, Cu, and Zn in physiology and oncology have emerged as an important tool. The nickel containing F430 is the prosthetic group of the enzyme methyl coenzyme M reductase which catalyzes the release of methane in the final step of methano-genesis, a prime energy metabolism candidate for life exploration space mission in the solar system. The 3.5 Gyr early life sulfite reductase as a life switch energy metabolism had Fe-Mo clusters. The nitrogenase for nitrogen fixation 3 billion years ago had Mo. The early life arsenite oxidase needed for anoxygenic photosynthesis energy metabolism 2.8 billion years ago had Mo and Fe. The selection pressure in metal incorporation inside a protein would be quantifiable in terms of the related nucleotide sequence complexity with fractal dimension and entropy values. Simulation model showed that the studied metal-required energy metabolism sequences had at least ten times more selection pressure relatively in comparison to the horizontal transferred sequences in Mealybug, guided by the outcome histogram of the correlation R-sq values. The metal energy metabolism sequence group was compared to the circadian clock KaiC sequence group using magnesium atomic level bond shifting mechanism in the protein, and the simulation model would suggest a much higher selection pressure for the energy life switch sequence group. The possibility of using Kepler 444 as an example of ancient life in Galaxy with the associated exoplanets has been proposed and is further discussed in this report. Examples of arsenic metal bonding shift probed by Synchrotron-based X-ray spectroscopy data and Zn controlled FOXP2 regulated pathways in human and chimp brain studied tissue samples are studied in relationship to the sequence bioinformatics. The analysis results suggest that relatively large metal bonding shift amount is associated with low probability correlation R

  19. Development of a computer code to predict a ventilation requirement for an underground radioactive waste storage tank

    International Nuclear Information System (INIS)

    Computer code, WTVFE (Waste Tank Ventilation Flow Evaluation), has been developed to evaluate the ventilation requirement for an underground storage tank for radioactive waste. Heat generated by the radioactive waste and mixing pumps in the tank is removed mainly through the ventilation system. The heat removal process by the ventilation system includes the evaporation of water from the waste and the heat transfer by natural convection from the waste surface. Also, a portion of the heat will be removed through the soil and the air circulating through the gap between the primary and secondary tanks. The heat loss caused by evaporation is modeled based on recent evaporation test results by the Westinghouse Hanford Company using a simulated small scale waste tank. Other heat transfer phenomena are evaluated based on well established conduction and convection heat transfer relationships. 10 refs., 3 tabs

  20. Development of a computer code to predict a ventilation requirement for an underground radioactive waste storage tank

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y.J.; Dalpiaz, E.L. [ICF Kaiser Hanford Co., Richland, WA (United States)

    1997-08-01

    Computer code, WTVFE (Waste Tank Ventilation Flow Evaluation), has been developed to evaluate the ventilation requirement for an underground storage tank for radioactive waste. Heat generated by the radioactive waste and mixing pumps in the tank is removed mainly through the ventilation system. The heat removal process by the ventilation system includes the evaporation of water from the waste and the heat transfer by natural convection from the waste surface. Also, a portion of the heat will be removed through the soil and the air circulating through the gap between the primary and secondary tanks. The heat loss caused by evaporation is modeled based on recent evaporation test results by the Westinghouse Hanford Company using a simulated small scale waste tank. Other heat transfer phenomena are evaluated based on well established conduction and convection heat transfer relationships. 10 refs., 3 tabs.

  1. Changes in Smoking-Related Norms in Bars Resulting from California's Smoke-Free Workplace Act

    Science.gov (United States)

    Satterlund, Travis D.; Lee, Juliet P.; Moore, Roland S.

    2012-01-01

    California's Smoke-Free Workplace Act--CA Labor Code Sec. 6404.5(a)--was extended to bars in 1998. This article analyzes changes in normative beliefs and behaviors related to bar smoking in the decade following the adoption of the Act. In a series of studies evaluating the smoke-free workplace law in bars, researchers conducted extensive…

  2. Sports Season, Sports Bars

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ For foreigners in Beijing, the sports bar is a special place, a place to gather for watching matches and a place to feel the familiarity of home, while for some sports enthusiasts it serves as their second home.

  3. The bar instability revisited

    OpenAIRE

    Chiodi, Filippo; Andreotti, Bruno; Claudin, Philippe

    2012-01-01

    The river bar instability is revisited, using a hydrodynamical model based on Reynolds averaged Navier-Stokes equations. The results are contrasted with the standard analysis based on shallow water Saint-Venant equations. We first show that the stability of both transverse modes (ripples) and of small wavelength inclined modes (bars) predicted by the Saint-Venant approach are artefacts of this hydrodynamical approximation. When using a more reliable hydrodynamical model, the dispersion relati...

  4. Software requirements, design, and verification and validation for the FEHM application - a finite-element heat- and mass-transfer code

    Energy Technology Data Exchange (ETDEWEB)

    Dash, Z.V.; Robinson, B.A.; Zyvoloski, G.A.

    1997-07-01

    The requirements, design, and verification and validation of the software used in the FEHM application, a finite-element heat- and mass-transfer computer code that can simulate nonisothermal multiphase multicomponent flow in porous media, are described. The test of the DOE Code Comparison Project, Problem Five, Case A, which verifies that FEHM has correctly implemented heat and mass transfer and phase partitioning, is also covered.

  5. 78 FR 6811 - Country Code Top-Level Domain (ccTLD) for the United States; Policies and Requirements; Comments...

    Science.gov (United States)

    2013-01-31

    ... National Telecommunications and Information Administration RIN 0660-XC005 Country Code Top-Level Domain (cc... Administration (NTIA) administers the contract for the country code top-level domain (ccTLD) for the United... territory, such as .jp for Japan, or .uk for the United Kingdom. The ccTLD is usually delegated to a...

  6. 基于二维码识别技术的电子签到模块设计%The Modern Check-in System Based on Two-Dimensional Bar Code

    Institute of Scientific and Technical Information of China (English)

    李立峰

    2012-01-01

    With the continuous development of the socio-economic information network technology,people increasingly rely on mobile Internet,and have much higher requirements for the mobile experience; on the other hand,another part of consumption - the merchant is also gradually looking for more innovative and efficient means to demonstrate their products and services to increase revenue. In such circumstances,the sign business model appears on the scene,people can go to merchant stores to check-in and get more promotions with handheld devices. In order to solve the consumer to sign the accurate location positioning,two-dimensional code recognition technology is used to provide a real and effective sign experience.%随着社会经济与信息网络技术的不断发展,人们对移动互联网越来越依赖,对移动体验的要求也越来越高;另一方面消费的另一环节-商户也渐渐地在寻找更加新颖快捷的技术手段来表现他们的产品及服务以增加收入.在这样的环境下,签到商业模式应运而生,人们可以通过手持设备向某地的商户门店进行签到进行互动.为了解决消费者签到位置定位不准确的问题,采取了二维码识别技术来为商家和消费者提供真实有效的签到体验.

  7. Sine-Bar Attachment For Machine Tools

    Science.gov (United States)

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  8. Field tests of wind turbines submitted to real voltage dips under the new Spanish grid code requirements

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, E. [Renewable Energy Research Institute, Department of Electrical, Electronic, and Control Engineering, EPSA, Universidad de Castilla-La Mancha, 02071 Albacete, (Spain); Fuentes, J. A.; Molina-Garcia, A.; Ruz, F. [Department of Electrical Engineering, Universidad Politecnica de Cartagena, 30202 Cartagena, (Spain); Jimenez, F. [Engineering Department, Gamesa Eolica S.A., Poligono Agustinos, calle A, E-31013 Pamplona, (Spain)

    2007-06-27

    This paper adds the new Spanish grid code to the previously published works about the comparison of international regulations for connection of wind turbines to the network. All the electrical magnitudes - currents and active and reactive power - regulated in the Spanish grid code are studied when the wind turbines are submitted to real voltage dips. Because grid codes and, specifically, the Spanish grid code do not fix the reactive power definition to be applied, four definitions commonly used have also been studied. Taking advantage of the voltage dips field tests carried out to the Gamesa G80 wind turbines, the results obtained for two representative voltage dip tests are presented: a three-phase and a phase-to-phase voltage dip. (Author).

  9. Locally Orderless Registration Code

    DEFF Research Database (Denmark)

    2012-01-01

    This is code for the TPAMI paper "Locally Orderless Registration". The code requires intel threadding building blocks installed and is provided for 64 bit on mac, linux and windows.......This is code for the TPAMI paper "Locally Orderless Registration". The code requires intel threadding building blocks installed and is provided for 64 bit on mac, linux and windows....

  10. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, P.; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second pap

  11. The IPG BAR project

    NARCIS (Netherlands)

    Mentink, B.; Henriquez, L.; Van Niekerk, L.; Verheul, R.

    2013-01-01

    The booklets 'Making Patterns' and 'Using Patterns' describe two aspects of the the pattern method within the urban design process. The accompanying IPG BAR Pattern Library is a small pattern library of urban-airport symbiosis patterns. These documents are the result of the Interdisciplinary Projec

  12. Highest Oxygen Bar

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The world’s highest altitude Lhalu Wetland in Tibet is rebounding from past environmental damage In Lhasa, where the oxygen content is just 60 percent of that of the plain area, a place known as the "natural oxygen bar"is highly prized by residents.

  13. Raising the bar (2)

    NARCIS (Netherlands)

    Elhorst, P.; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    In this editorial we summarise and comment on the papers published in issue 11.2 so as to raise the bar in applied spatial economic research and highlight new trends. The first paper analyses which regions in Europe were resilient to the great Recession and which ones were not. The second and the th

  14. Modeling of concrete cracking due to corrosion process of reinforcement bars

    International Nuclear Information System (INIS)

    The reinforcement corrosion in Reinforced Concrete (RC) is a major reason of degradation for structures and infrastructures throughout the world leading to their premature deterioration before design life was attained. The effects of corrosion of reinforcement are: (i) the reduction of the cross section of the bars, and (ii) the development of corrosion products leading to the appearance of cracks in the concrete cover and subsequent cover spalling. Due to their intrinsic complex nature, these issues require an interdisciplinary approach involving both material science and structural design knowledge also in terms on International and National codes that implemented the concept of durability and service life of structures. In this paper preliminary FEM analyses were performed in order to simulate pitting corrosion or general corrosion aimed to demonstrate the possibility to extend the results obtained for a cylindrical specimen, reinforced by a single bar, to more complex RC members in terms of geometry and reinforcement. Furthermore, a mechanical analytical model to evaluate the stresses in the concrete surrounding the reinforcement bars is proposed. In addition, a sophisticated model is presented to evaluate the non-linear development of stresses inside concrete and crack propagation when reinforcement bars start to corrode. The relationships between the cracking development (mechanical) and the reduction of the steel section (electrochemical) are provided. Finally, numerical findings reported in this paper were compared to experimental results available in the literature and satisfactory agreement was found

  15. Halo evolution in the presence of a disc bar

    CERN Document Server

    McMillan, P J; Millan, Paul J. Mc; Dehnen, Walter

    2005-01-01

    Angular momentum transfer from a rotating stellar bar has been proposed by Weinberg & Katz (2002) as a mechanism to destroy dark-matter cusps in a few rotation periods. The N-body simulations performed by these authors in support of their claim employed spherical harmonics for the force computation and were, as shown by Sellwood (2003), very sensitive to inclusion of asymmetric terms (odd l,m). In order to disentangle possible numerical artifacts due to the usage of spherical harmonics from genuine stellar dynamical effects, we performed similar experiments using a tree code and find that significant cusp destruction requires substantially more angular momentum than is realistically available. However, we find that the simplified model (a N-body halo torqued by a rotating bar pinned to the origin) undergoes an instability in which the cusp moves away from the origin. In presence of this off-centring, spherical density profiles centred on the origin display an apparent cusp-removal. We strongly suspect tha...

  16. The BaBar Data Acquisition System

    CERN Document Server

    Scott, I; Grosso, P; Huffer, M E; O'Grady, C; Russell, J J

    1999-01-01

    The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by ana-lyzing the decays of a very large sample of B and B(Bar) mesons produced at the high luminosity PEP-II accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detec-tor subsystems. Data from the front end electronics is read into commercial VME processors via a custom "Personality Card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data is read out via a non-blocking network switch to a farm of commercial UNIX processors. The current implementation of the BaBar data acquisition sys-tem has been shown to sustain a Level 1 trigger rate of 1.3...

  17. Nutritional Evaluation of NASA's Rodent Food Bar Diet

    Science.gov (United States)

    Barrett, Joyce E.; Yu, Diane S.; Dalton, Bonnie P.

    2000-01-01

    Tests are being conducted on NASA's rodent Food Bar in preparation for long-term use as the rat and mouse diet aboard the International Space Station. Nutritional analyses are performed after the bars are manufactured and then repeated periodically to determine nutritional stability. The primary factors analyzed are protein, ash, fat, fiber, moisture, amino acids, fatty acids, and minerals. Nutrient levels are compared to values published in the National Research Council's dietary requirements for rodents, and also to those contained in several commonly used commercial rodent lab diets. The Food Bar is manufactured from a powdered diet to which moisture is added as it is processed through an extruder. The bars are dipped into potassium sorbate, vacuum-sealed, and irradiated. In order to determine nutrient changes during extrusion and irradiation, the powdered diet, the non-irradiated bars, and the irradiated bars are all analyzed. We have observed lower values for some nutrients (iodine, vitamin K, and iron) in the Food Bars compared with NRC requirements. Many nutrients in the Food Bars are contained at a higher level than levels in the NRC requirements. An additional factor we are investigating is the 26% moisture level in the Food Bars, which drops to about 15% within a week, compared to a stable 10% moisture in many standard lab chow diets. In addition to the nutritional analyses, the food bar is being fed to several strains of rats and mice, and feeding study and necropsy results are being observed (Barrett et al, unpublished data). Information from the nutritional analyses and from the rodent studies will enable us to recommend the formulation that will most adequately meet the rodent Food Bar requirements for long-term use aboard the Space Station.

  18. Dark Matter Trapping by Stellar Bars: The Shadow Bar

    Science.gov (United States)

    Petersen, Michael S.; Weinberg, Martin D.; Katz, Neal

    2016-09-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of three over the rate predicted by dynamical friction with an untrapped dark halo, and thus provides a possible physical explanation for the observed prevalence of fast bars in nature.

  19. Dark Matter Trapping by Stellar Bars: The Shadow Bar

    CERN Document Server

    Petersen, Michael S; Katz, Neal

    2016-01-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of three over the naive dynamical friction prediction, and thus provides a possible physical explanation for the observed prevalence of fast bars in nat...

  20. Cooling of rectangular bars

    International Nuclear Information System (INIS)

    A solution of the time-transient Heat Transfer Differential Equation in rectangular coordinates is presented, leading to a model which describes the temperature drop with time in rectangular bars. It is similar to an other model for cilindrical bars which has been previously developed in the Laboratory of Mechanical Metallurgy of UFRGS. Following these models, a generalization has been made, which permits cooling time evaluation for all profiles. These results are compared with experimental laboratory data in the 1200 to 8000C range. Some other existing models were also studied which have the purpose of studing the same phenomenon. Their mathematical forms and their evaluated values are analyzed and compared with experimental ones. (Author)

  1. The bar instability revisited

    CERN Document Server

    Chiodi, Filippo; Claudin, Philippe

    2012-01-01

    The river bar instability is revisited, using a hydrodynamical model based on Reynolds averaged Navier-Stokes equations. The results are contrasted with the standard analysis based on shallow water Saint-Venant equations. We first show that the stability of both transverse modes (ripples) and of small wavelength inclined modes (bars) predicted by the Saint-Venant approach are artefacts of this hydrodynamical approximation. When using a more reliable hydrodynamical model, the dispersion relation does not present any maximum of the growth rate when the sediment transport is assumed to be locally saturated. The analysis therefore reveals the fundamental importance of the relaxation of sediment transport towards equilibrium as it it is responsible for the stabilisation of small wavelength modes. This dynamical mechanism is characterised by the saturation number, defined as the ratio of the saturation length to the water depth Lsat/H. This dimensionless number controls the transition from ripples (transverse patte...

  2. THE MASS PROFILE AND SHAPE OF BARS IN THE SPITZER SURVEY OF STELLAR STRUCTURE IN GALAXIES (S{sup 4}G): SEARCH FOR AN AGE INDICATOR FOR BARS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Taehyun; Lee, Myung Gyoon [Astronomy Program, Department of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Sheth, Kartik; Muñoz-Mateos, Juan-Carlos [National Radio Astronomy Observatory/NAASC, 520 Edgemont Road, Charlottesville, VA 22903 (United States); Gadotti, Dimitri A. [European Southern Observatory, Casilla 19001, Santiago 19 (Chile); Zaritsky, Dennis [University of Arizona, 933 N. Cherry Avenue, Tucson, AZ 85721 (United States); Elmegreen, Bruce G. [IBM Research Division, T. J. Watson Research Center, Yorktown Heights, NY 10598 (United States); Athanassoula, E.; Bosma, Albert [Aix Marseille Université, CNRS, LAM (Laboratoire d' Astrophysique de Marseille) UMR 7326, 13388 Marseille (France); Holwerda, Benne [European Space Agency, ESTEC, Keplerlaan 1, 2200-AG, Noordwijk (Netherlands); Ho, Luis C. [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China); Comerón, Sébastien; Laurikainen, Eija; Salo, Heikki [Division of Astronomy, Department of Physical Sciences, University of Oulu, Oulu, FIN-90014 (Finland); Knapen, Johan H.; Erroz-Ferrer, Santiago [Instituto de Astrofísica de Canarias, E-38200 La Laguna, Tenerife (Spain); Hinz, Joannah L. [MMTO, University of Arizona, 933 N. Cherry Avenue, Tucson, AZ 85721 (United States); Buta, Ronald J. [Department of Physics and Astronomy, University of Alabama, Box 870324, Tuscaloosa, AL 35487 (United States); Kim, Minjin [Korea Astronomy and Space Science Institute, Daejeon 305-348 (Korea, Republic of); Madore, Barry F. [The Observatories of the Carnegie Institution of Washington, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); and others

    2015-01-20

    We have measured the radial light profiles and global shapes of bars using two-dimensional 3.6 μm image decompositions for 144 face-on barred galaxies from the Spitzer Survey of Stellar Structure in Galaxies. The bar surface brightness profile is correlated with the stellar mass and bulge-to-total (B/T) ratio of their host galaxies. Bars in massive and bulge-dominated galaxies (B/T > 0.2) show a flat profile, while bars in less massive, disk-dominated galaxies (B/T ∼ 0) show an exponential, disk-like profile with a wider spread in the radial profile than in the bulge-dominated galaxies. The global two-dimensional shapes of bars, however, are rectangular/boxy, independent of the bulge or disk properties. We speculate that because bars are formed out of disks, bars initially have an exponential (disk-like) profile that evolves over time, trapping more disk stars to boxy bar orbits. This leads bars to become stronger and have flatter profiles. The narrow spread of bar radial profiles in more massive disks suggests that these bars formed earlier (z > 1), while the disk-like profiles and a larger spread in the radial profile in less massive systems imply a later and more gradual evolution, consistent with the cosmological evolution of bars inferred from observational studies. Therefore, we expect that the flatness of the bar profile can be used as a dynamical age indicator of the bar to measure the time elapsed since the bar formation. We argue that cosmic gas accretion is required to explain our results on bar profile and the presence of gas within the bar region.

  3. Applying Schwarzschild's orbit superposition method to barred or non-barred disc galaxies

    CERN Document Server

    Vasiliev, Eugene

    2015-01-01

    We present an implementation of the Schwarzschild orbit superposition method which can be used for constructing self-consistent equilibrium models of barred or non-barred disc galaxies, or of elliptical galaxies with figure rotation. This is a further development of the publicly available code SMILE; its main improvements include a new efficient representation of an arbitrary gravitational potential using two-dimensional spline interpolation of Fourier coefficients in the meridional plane, as well as the ability to deal with rotation of the density profile and with multicomponent mass models. We compare several published methods for constructing composite axisymmetric disc--bulge--halo models and demonstrate that our code produces the models that are closest to equilibrium. We also apply it to create models of triaxial elliptical galaxies with cuspy density profiles and figure rotation, and find that such models can be found and are stable over many dynamical times in a wide range of pattern speeds and angula...

  4. Observations of offshore bar decay

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian;

    2010-01-01

    Long-term, net offshore bar migration is a common occurrence on many multiple-barred beaches. The first stage of the process involves the generation of a longshore bar close to the shoreline that oscillates about a mean position for some time, followed by a stage of net offshore migration across...... the upper shoreface, and finally a stage of decaying bar form through loss of sediment volume at the outer boundary of the upper shoreface. The phenomenon has been previously documented in the Netherlands, the USA, the Canadian Great Lakes, and in New Zealand, but our present understanding...... of the morphodynamic processes and sediment transport pathways involved in bar decay is limited. In this paper, long-term, net offshore bar migration is investigated at Vejers Beach, located on the North Sea coast of Denmark where offshore bar migration rates are of the order of 45–55 m a-1. A wave height...

  5. Coding for dummies

    CERN Document Server

    Abraham, Nikhil

    2015-01-01

    Hands-on exercises help you learn to code like a pro No coding experience is required for Coding For Dummies,your one-stop guide to building a foundation of knowledge inwriting computer code for web, application, and softwaredevelopment. It doesn't matter if you've dabbled in coding or neverwritten a line of code, this book guides you through the basics.Using foundational web development languages like HTML, CSS, andJavaScript, it explains in plain English how coding works and whyit's needed. Online exercises developed by Codecademy, a leading online codetraining site, help hone coding skill

  6. Bar Code Reader”とdBASE III PLUSとをインターフェースするプログラムの作成

    OpenAIRE

    比留木, 武雄

    1994-01-01

    The author reported Canine Dirofilariasis Control (CDC) Programs in dBASE III Ver. 2.0 (dBASE) which can control periodical administration of drugs, and forward a direct mail (DM) such an drugs and/or letter to the breeder. Although expected to be available in a pet clinic, these CDC programs proved to be still room for improvement because the voice has been heard that typing data manually is a durden, especially during a busy clinical work. Thus, the author decided to utilize a her code read...

  7. Speech coding

    Energy Technology Data Exchange (ETDEWEB)

    Ravishankar, C., Hughes Network Systems, Germantown, MD

    1998-05-08

    Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental change in infrastructure. Such a requirement could not have been easily met without the advent of digital transmission systems, thereby requiring speech to be coded digitally. The term Speech Coding is often referred to techniques that represent or code speech signals either directly as a waveform or as a set of parameters by analyzing the speech signal. In either case, the codes are transmitted to the distant end where speech is reconstructed or synthesized using the received set of codes. A more generic term that is applicable to these techniques that is often interchangeably used with speech coding is the term voice coding. This term is more generic in the sense that the

  8. Obtention control bars patterns for a BWR using Tabo search

    International Nuclear Information System (INIS)

    The obtained results when implementing the technique of tabu search, for to optimize patterns of control bars in a BWR type reactor, using the CM-PRESTO code are presented. The patterns of control bars were obtained for the designs of fuel reloads obtained in a previous work, using the same technique. The obtained results correspond to a cycle of 18 months using 112 fresh fuels enriched at the 3.53 of U-235. The used technique of tabu search, prohibits recently visited movements, in the position that correspond to the axial positions of the control bars, additionally the tiempotabu matrix is used for to manage a size of variable tabu list and the objective function is punished with the frequency of the forbidden movements. The obtained patterns of control bars improve the longitude of the cycle with regard to the reference values and they complete the restrictions of safety. (Author)

  9. Ukola Club. Bar americano

    Directory of Open Access Journals (Sweden)

    Azpiazu, J. R.

    1961-03-01

    Full Text Available En la calle de Serrano, aprovechando un semisótano dedicado a otro negocio anteriormente, se ha instalado un bar americano, de cuyo interior ofrecemos algunos pormenores. Se han cuidado, especialmente, las condiciones acústicas, resueltas por medio de un techo de escayola perforada, con vitrofib en su parte superior, y paredes de madera, que contribuyen a darle un ambiente cálido y acogedor. El soporte de hierro laminado existente en el centro del local, cuya supresión hubiera sido costosa, se ha revestido con lajas de mármol que le convierten en un elemento decorativo.

  10. The decays \\bar{B}->\\bar{K}D and \\bar{B}-> \\bar{K}\\bar{D} and final state interactions

    CERN Document Server

    Fayyazuddin, A

    2001-01-01

    The decays \\bar{B}-> \\bar{K}D and \\bar{B}-> \\bar{K}\\bar{D} taking into account final state interactions are discussed. These decays are described by four strong phases \\delta_0,\\delta_1,\\bar{\\delta}_0,\\bar{\\delta}_1 (subscripts 0 and 1 refers to I=0 and I=1 final states), one weak phase \\gamma and four real amplitudes. It is argued that strong interaction dynamics implies \\bar{\\delta}_1=0,\\delta_0=-\\delta_1. Rescattering has significant effects on weak amplitudes. Taking into account, rescattering, we find that direct CP--violating asymmetry in these decays may lie in the range \\mp 0.023\\sin \\gamma \\leq \\QTR{cal}{A}_{1,2}\\leq \\mp 0.086\\sin \\gamma.

  11. 基于nCode的前横向稳定杆应变疲劳分析%Strain Fatigue Analysis on Front Transverse Stability Bar Based on nCode

    Institute of Scientific and Technical Information of China (English)

    倪昀; 陈伟

    2014-01-01

    基于应变疲劳相关理论,采用Hypermesh软件建立了汽车前横向稳定杆的FEM模型,按照实际的跳动行程与约束条件,利用Nastran进行静态力学求解,然后将求解结果在nCode DesignLife中做E-N仿真分析.获得预测该零件的应变疲劳寿命、寿命安全系数及断裂危险位置等信息,验证了零件设计的合理性,同时为零件优化设计及材料的选择提供了科学设计依据.

  12. Bar piezoelectric ceramic transformers.

    Science.gov (United States)

    Erhart, Jiří; Pulpan, Půlpán; Rusin, Luboš

    2013-07-01

    Bar-shaped piezoelectric ceramic transformers (PTs) working in the longitudinal vibration mode (k31 mode) were studied. Two types of the transformer were designed--one with the electrode divided into two segments of different length, and one with the electrodes divided into three symmetrical segments. Parameters of studied transformers such as efficiency, transformation ratio, and input and output impedances were measured. An analytical model was developed for PT parameter calculation for both two- and three-segment PTs. Neither type of bar PT exhibited very high efficiency (maximum 72% for three-segment PT design) at a relatively high transformation ratio (it is 4 for two-segment PT and 2 for three-segment PT at the fundamental resonance mode). The optimum resistive loads were 20 and 10 kΩ for two- and three-segment PT designs for the fundamental resonance, respectively, and about one order of magnitude smaller for the higher overtone (i.e., 2 kΩ and 500 Ω, respectively). The no-load transformation ratio was less than 27 (maximum for two-segment electrode PT design). The optimum input electrode aspect ratios (0.48 for three-segment PT and 0.63 for two-segment PT) were calculated numerically under no-load conditions.

  13. A Study on a Bell Type Stabilizer Bar of a Small Coaxial Helicopter

    Science.gov (United States)

    Sunada, Shigeru; Kikuchi, Atsushi; Tokutake, Hiroshi

    The motion of a stabilizer bar of the small coaxial helicopter was analyzed in the previous study. It has been made clear by the measurements on the motion of the stabilizer bar that the following two revisions are required in the analysis. (1) The motion of stabilizer bar is affected by the upper rotor. (2) Neither of the terms in the moment acting on the stabilizer bar at its hinge, kββ+kββ, can be ignored.

  14. Dynamical Evolution of Barred Galaxies

    OpenAIRE

    Athanassoula, E

    2005-01-01

    Angular momentum redistribution within barred galaxies drives their dynamical evolution. Angular momentum is emitted mainly by near-resonant material in the bar region and absorbed by resonant material mainly in the outer disc and in the halo. This exchange determines the strength of the bar, the decrease of its pattern speed, as well as its morphology. If the galaxy has also a gaseous component and/or a companion or satellite, then these also take part in the angular momentum exchange. Durin...

  15. Review of current severe accident management approaches in Europe and identification of related modelling requirements for the computer code ASTEC V2.1

    Energy Technology Data Exchange (ETDEWEB)

    Hermsmeyer, S. [European Commission JRC, Petten (Netherlands). Inst. for Energy and Transport; Herranz, L.E.; Iglesias, R. [CIEMAT, Madrid (Spain); and others

    2015-07-15

    The severe accident at the Fukushima-Daiichi nuclear power plant (NPP) has led to a worldwide review of nuclear safety approaches and is bringing a refocussing of R and D in the field. To support these efforts several new Euratom FP7 projects have been launched. The CESAM project focuses on the improvement of the ASTEC computer code. ASTEC is jointly developed by IRSN and GRS and is considered as the European reference code for Severe Accident Analyses since it capitalizes knowledge from the extensive Euro-pean R and D in the field. The project aims at the code's enhancement and extension for use in Severe Accident Management (SAM) analysis of the NPPs of Generation II-III presently under operation or foreseen in the near future in Europe, spent fuel pools included. The work reported here is concerned with the importance, for the further development of the code, of SAM strategies to be simulated. To this end, SAM strategies applied in the EU have been compiled. This compilation is mainly based on the public information made available in the frame of the EU ''stress tests'' for NPPs and has been complemented by information pro-vided by the different CESAM partners. The context of SAM is explained and the strategies are presented. The modelling capabilities for the simulation of these strategies in the current production version 2.0 of ASTEC are discussed. Furthermore, the requirements for the next version of ASTEC V2.1 that is supported in the CESAM project are highlighted. They are a necessary complement to the list of code improvements that is drawn from consolidating new fields of application, like SFP and BWR model enhancements, and from new experimental results on severe accident phenomena.

  16. Review of current severe accident management approaches in Europe and identification of related modelling requirements for the computer code ASTEC V2.1

    International Nuclear Information System (INIS)

    The severe accident at the Fukushima-Daiichi nuclear power plant (NPP) has led to a worldwide review of nuclear safety approaches and is bringing a refocussing of R and D in the field. To support these efforts several new Euratom FP7 projects have been launched. The CESAM project focuses on the improvement of the ASTEC computer code. ASTEC is jointly developed by IRSN and GRS and is considered as the European reference code for Severe Accident Analyses since it capitalizes knowledge from the extensive Euro-pean R and D in the field. The project aims at the code's enhancement and extension for use in Severe Accident Management (SAM) analysis of the NPPs of Generation II-III presently under operation or foreseen in the near future in Europe, spent fuel pools included. The work reported here is concerned with the importance, for the further development of the code, of SAM strategies to be simulated. To this end, SAM strategies applied in the EU have been compiled. This compilation is mainly based on the public information made available in the frame of the EU ''stress tests'' for NPPs and has been complemented by information pro-vided by the different CESAM partners. The context of SAM is explained and the strategies are presented. The modelling capabilities for the simulation of these strategies in the current production version 2.0 of ASTEC are discussed. Furthermore, the requirements for the next version of ASTEC V2.1 that is supported in the CESAM project are highlighted. They are a necessary complement to the list of code improvements that is drawn from consolidating new fields of application, like SFP and BWR model enhancements, and from new experimental results on severe accident phenomena.

  17. 46 CFR Appendix A to Part 520 - Standard Terminology and Codes

    Science.gov (United States)

    2010-10-01

    ... CLD Frozen FRZ Heated HTD Refrigerated RE Ventilated VEN J. Packaging Codes: Bag BAG Bale BAL Bar BAR... Reverse Reel RVR Sack SAK Shook SHK Sides of Beef SID Skid SKD Skid, Elev, Lift Trk SKE Sleeve SLV...

  18. 基于条形码识别的物流包裹自动分拣系统设计%Design of Automatic Parcel Sorting System Based on Bar Code Recognition

    Institute of Scientific and Technical Information of China (English)

    王昆; 刘晓山

    2016-01-01

    为了提高物流中心对快递包裹的分拣效率,在档板式分拣机的基础上设计了自动控制系统,该系统由智能终端和计算机信息系统两部分组成,采用 C/S 架构设计。智能终端作为客户端在 DSP 处理器TMS320DM6437平台上开发,采用红外感应器检测包裹的位置,然后触发摄像头采集包裹上运单的图像,经过处理后译出运单号码,再通过与计算机信息系统建立的TCP/IP连接进行数据通信,查询包裹的目的地,并返回给智能终端后对分离机械手进行控制,从而达到自动分拣的目的。通过测试结果表明,该系统能够自动识别出顺丰快递Code128C编码的运单号码,并通过对分离旋转挡臂的控制实现了自动分拣,大大提高了快递行业的工作效率。%In order to improve the efficiency on the express parcel sorting, automatic control system, designed with C/S architecture is proposed, which is based on the baffle plate sorting machine and composed of intelligent terminals and computer information system. As a client, the intelligent terminal, developed on the platform of TMS320DM6437, detects the position of parcel with infrared inductor and triggers the camera to collect the image on package. The intelligent terminal achieves date communication with the information sys-tem by establishing TCP /IP connection after way bill number is decoded, then the package destination inquires are settled and informa-tion is fed back to intelligent terminal for sorting by controlling the separating machine. The test results show that the system can auto-matically identify the SF express number with Code128C and sort parcels by controlling the rotating baffle arm. It greatly improves effi-ciency of the express delivery industry.

  19. Mechanical Properties of Welded Deformed Reinforcing Steel Bars

    Directory of Open Access Journals (Sweden)

    Ghafur H. Ahmed

    2015-05-01

    Full Text Available Reinforcement strength, ductility and bendability properties are important components in design of reinforced concrete members, as the strength of any member comes mainly from reinforcement. Strain compatibility and plastic behaviors are mainly depending on reinforcement ductility. In construction practice, often welding of the bars is required. Welding of reinforcement is an instant solution in many cases, whereas welding is not a routine connection process. Welding will cause deficiencies in reinforcement bars, metallurgical changes and re-crystallization of microstructure of particles. Weld metal toughness is extremely sensitive to the welding heat input that decreases both of its strength and ductility. For determining the effects of welding in reinforcement properties, 48 specimens were tested with 5 different bar diameters, divided into six groups. Investigated parameters were: properties of un-welded bars; strength, ductility and density of weld metal; strength and ductility reduction due to heat input for bundled bars and transverse bars; welding effect on bars’ bending properties; behavior of different joint types; properties of three weld groove shapes also the locations and types of failures sections. Results show that, strength and elongation of the welded bars decreased by (10-40% and (30-60% respectively. Cold bending of welded bars and groove welds shall be prevented.

  20. Emissions Inventory Report Summary: Reporting Requirements for the New Mexico Administrative Code, Title 20, Chapter 2, Part 73 (20 NMAC 2.73) for Calendar Year 2001

    Energy Technology Data Exchange (ETDEWEB)

    Margorie Stockton

    2003-04-01

    Los Alamos National Laboratory is subject to annual emissions-reporting requirements for regulated air contaminants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. For calendar year 2001, the Technical Area 3 steam plant was the primary source of criteria air pollutants from the Laboratory, while research and development activities were the primary source of volatile organic compounds. Emissions of beryllium and aluminum were reported for activities permitted under 20.2.72 NMAC. Hazardous air pollutant emissions from chemical use for research and development activities were also reported.

  1. Emissions Inventory Report Summary: Reporting Requirements for the New Mexico Administrative Code, Title 20, Chapter 2, Part 73 (20 NMAC 2.73) for Calendar Year 2001

    International Nuclear Information System (INIS)

    Los Alamos National Laboratory is subject to annual emissions-reporting requirements for regulated air contaminants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. For calendar year 2001, the Technical Area 3 steam plant was the primary source of criteria air pollutants from the Laboratory, while research and development activities were the primary source of volatile organic compounds. Emissions of beryllium and aluminum were reported for activities permitted under 20.2.72 NMAC. Hazardous air pollutant emissions from chemical use for research and development activities were also reported

  2. Molecular basis for SNX-BAR-mediated assembly of distinct endosomal sorting tubules

    DEFF Research Database (Denmark)

    van Weering, Jan R.T.; Sessions, Richard B.; Traer, Colin J.;

    2012-01-01

    -loop' interactions. Overall, the restricted and selective nature of these interactions provide a molecular explanation for how distinct SNX-BAR-decorated tubules are nucleated from the same endosomal vacuole, as observed in living cells. Our data provide insight into the molecular mechanism that generates......-BARs, we report that some, but not all, can elicit the formation of tubules with diameters that resemble sorting tubules observed in cells. We reveal that SNX-BARs display a restricted pattern of BAR domain-mediated dimerization, and by resolving a 2.8 Å structure of a SNX1-BAR domain homodimer, establish...... that dimerization is achieved in part through neutralization of charged residues in the hydrophobic BAR-dimerization interface. Membrane remodelling also requires functional amphipathic helices, predicted to be present in all SNX-BARs, and the formation of high order SNX-BAR oligomers through selective 'tip...

  3. Dynamical Evolution of Barred Galaxies

    CERN Document Server

    Athanassoula, E

    2005-01-01

    Angular momentum redistribution within barred galaxies drives their dynamical evolution. Angular momentum is emitted mainly by near-resonant material in the bar region and absorbed by resonant material mainly in the outer disc and in the halo. This exchange determines the strength of the bar, the decrease of its pattern speed, as well as its morphology. If the galaxy has also a gaseous component and/or a companion or satellite, then these also take part in the angular momentum exchange. During the evolution a bar structure forms in the inner parts of the halo as well. This bar is shorter and fatter than the disc bar and stays so all through the simulation, although its length grows considerably with time. Viewed edge-on, the bar in the disc component acquires a boxy or peanut shape. I describe the families of periodic orbits that explain such structures and review the observations showing that boxy/peanut `bulges' are in fact just bars seen edge-on.

  4. Niobium in engineering bar steels

    International Nuclear Information System (INIS)

    The use of niobium as a microalloying addition to hot rolled and cold finished bars offers many opportunities to achieve enhanced mechanical properties in a very cost effective manner. By the addition of niobium (sometimes in combination with vanadium) to selected carbon steel grades, it is possible to produce hot rolled bars with minimum yield strengths up to 689 MPa (100 ksi) and cold finished bars with yield strengths up to 1035 MPa (150 ksi). These high-strength-low-alloy bars have a myriad of applications particularly for automotive parts such as shafts, stabilizer bars, tie rods, piston rods, fasteners such as U-bolts, brackets, and various transmission parts. Of particular value has been the specification of Nb-microalloyed steels for such hot forgings as connecting rods and caps, and weld yokes a situation which has permitted elimination of post-forging heat treatment (quenching and tempering). Significant reductions in cost and energy consumption have been realized

  5. Bars in Cuspy Dark Halos

    CERN Document Server

    Dubinski, John; Shlosman, Isaac

    2008-01-01

    We examine the bar instability in models with an exponential disk and a cuspy NFW-like dark matter (DM) halo inspired by cosmological simulations. Bar evolution is studied as a function of numerical resolution in a sequence of models spanning 10K to 100M DM particles - including a multi-mass model with an effective resolution of 10G. The goal is to find convergence in dynamical behaviour. We characterize the bar growth, the buckling instability, pattern speed decay through resonant transfer of angular momentum, and possible destruction of the DM halo cusp. Overall, most characteristics converge in behaviour in detail for halos containing more than 10M particles. Notably, the formation of the bar does not destroy the density cusp in this case. These higher resolution simulations clearly illustrate the importance of discrete resonances in transporting angular momentum from the bar to the halo.

  6. Galaxy Zoo: CANDELS Barred Disks and Bar Fractions

    CERN Document Server

    Simmons, B D; Lintott, Chris; Masters, Karen L; Willett, Kyle W; Keel, William C; Smethurst, R J; Cheung, Edmond; Nichol, Robert C; Schawinski, Kevin; Rutkowski, Michael; Kartaltepe, Jeyhan S; Bell, Eric F; Casteels, Kevin R V; Conselice, Christopher J; Almaini, Omar; Ferguson, Henry C; Fortson, Lucy; Hartley, William; Kocevski, Dale; Koekemoer, Anton M; McIntosh, Daniel H; Mortlock, Alice; Newman, Jeffrey A; Ownsworth, Jamie; Bamford, Steven; Dahlen, Tomas; Faber, Sandra M; Finkelstein, Steven L; Fontana, Adriano; Galametz, Audrey; Grogin, N A; Grutzbauch, Ruth; Guo, Yicheng; Haussler, Boris; Jek, Kian J; Kaviraj, Sugata; Lucas, Ray A; Peth, Michael; Salvato, Mara; Wiklind, Tommy; Wuyts, Stijn

    2014-01-01

    The formation of bars in disk galaxies is a tracer of the dynamical maturity of the population. Previous studies have found that the incidence of bars in disks decreases from the local Universe to z ~ 1, and by z > 1 simulations predict that bar features in dynamically mature disks should be extremely rare. Here we report the discovery of strong barred structures in massive disk galaxies at z ~ 1.5 in deep rest-frame optical images from CANDELS. From within a sample of 876 disk galaxies identified by visual classification in Galaxy Zoo, we identify 123 barred galaxies. Selecting a sub-sample within the same region of the evolving galaxy luminosity function (brighter than L*), we find that the bar fraction across the redshift range 0.5< z < 2 (f_bar = 10.7 +6.3 -3.5% after correcting for incompleteness) does not significantly evolve. We discuss the implications of this discovery in the context of existing simulations and our current understanding of the way disk galaxies have evolved over the last 11 bil...

  7. User`s guide and physics manual for the SCATPlus circuit code

    Energy Technology Data Exchange (ETDEWEB)

    Yapuncich, M.L.; Deninger, W.J.; Gribble, R.F.

    1994-05-09

    ScatPlus is a user friendly circuit code and an expandable library of circuit models for electrical components and devices; it can be used to predict the transient behavior in electric circuits. The heart of ScatPlus is the transient circuit solver SCAT written in 1986 by R.F. Gribble. This manual includes system requirements, physics manual, ScatPlus component library, tutorial, ScatPlus screen, menus and toolbar, ScatPlus tool bar, procedures.

  8. Design and implementation of food safety backtracking system based on two-dimensional bar code of PDF417%基于PDF417二维条码的食品安全追溯系统的设计与实现

    Institute of Scientific and Technical Information of China (English)

    李建春; 张江伟; 谢小丽; 李健勇; 黄道颖

    2011-01-01

    Because the current situation of the frequent occurrence of food security events, PDF417 two-dimensional bar code encoding and decoding components were designed and implemented based on COM technology, and applied to the food safety backtracking system. Through effective monitoring of the life cycle of problems food, they can be traced quickly, and the source can be found and the fast positioning of the flow of food can be achieved.%针对当前食品安全事件频发的情况,设计和实现了基于COM技术的PDF417二维条码编解码组件,并将其应用到食品安全回溯系统中,通过对食品生命周期的有效监控,对问题食品进行回溯,迅速实现问题食品源头和流向的快速定位.

  9. Assessment of the Portuguese building thermal code: Newly revised requirements for cooling energy needs used to prevent the overheating of buildings in the summer

    International Nuclear Information System (INIS)

    In this paper, cooling energy needs are calculated by the steady-state methodology of the Portuguese building thermal code. After the first period of building code implementation, re-evaluation according to EN ISO 13790 is recommended in order to compare results with the dynamic simulation results. From these analyses, a newly revised methodology arises including a few corrections in procedure. This iterative result is sufficiently accurate to calculate the building's cooling energy needs. Secondly, results show that the required conditions are insufficient to prevent overheating. The use of the gain utilization factor as an overheating risk index is suggested, according to an adaptive comfort protocol, and is integrated in the method used to calculate the maximum value for cooling energy needs. This proposed streamlined method depends on reference values: window-to-floor area ratio, window shading g-value, integrated solar radiation and gain utilization factor, which leads to threshold values significantly below the ones currently used. These revised requirements are more restrictive and, therefore, will act to improve a building's thermal performance during summer. As a rule of thumb applied for Portuguese climates, the reference gain utilization factor should assume a minimum value of 0.8 for a latitude angle range of 40-41oN, 0.6 for 38-39oN and 0.5 for 37oN. -- Highlights: → A newly revised methodology for Portuguese building thermal code. → The use of the gain utilization factor as an overheating risk index is suggested. → The proposed streamlined method depends on reference values. → Threshold maximum values are significantly below the ones currently used.

  10. Repairing and strengthening a fractured Hader bar.

    Science.gov (United States)

    Herrero, D B

    1997-01-01

    Stresses from occlusion and metal fatigue over time can cause fracture of overdenture retention bars. Often failure of the bar necessitates the removal and remake of the bar. This may damage the abutment, especially if there are dowel posts involved. This article describes a method for reinforcing the existing bar without having to remove the bar or significantly alter the overdenture. The fractured bar can be prepared in the mouth to receive a reinforcing superstructure that will be cemented.

  11. Formation of Nuclear Spirals in Barred Galaxies

    CERN Document Server

    Ann, H B; Thakur, Parijat

    2004-01-01

    We have performed smoothed particle hydrodynamics (SPH) simulations for the response of the gaseous disk to the imposed moderately strong non-axisymmetric potentials. The model galaxies are composed of the three stellar components (disk, bulge and bar) and two dark ones (supermassive black hole and halo) whose gravitational potentials are assumed to be invariant in time in the frame corotating with the bar. We found that the torques alone generated by the moderately strong bar that gives the maximum of tangential-to-radial force ratio as $(F_{Tan}/F_{Rad})_{max}= 0.3$ are not sufficient to drive the gas particles close to the center due to the barrier imposed by the inner Lindblad resonances (ILRs). In order to transport the gas particles towards the nucleus ($r<100$ pc), a central supermassive black hole (SMBH) and high sound speed of the gas are required to be present. The former is required to remove the inner inner Lindblad resonance (IILR) that prevents gas inflow close to the nucleus, while the latte...

  12. Guide to NRC reporting and recordkeeping requirements. Compiled from requirements in Title 10 of the U.S. Code of Federal Regulations as codified on December 31, 1993; Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Collins, M.; Shelton, B.

    1994-07-01

    This compilation includes in the first two sections the reporting and recordkeeping requirements applicable to US Nuclear Regulatory Commission (NRC) licensees and applicants and to members of the public. It includes those requirements codified in Title 10 of the code of Federal Regulations, Chapter 1, on December 31, 1993. It also includes, in a separate section, any of those requirements that were superseded or discontinued between January 1992 and December 1993. Finally, the appendix lists mailing and delivery addresses for NRC Headquarters and Regional Offices mentioned in the compilation. The Office of Information Resources Management staff compiled this listing of reporting and recordkeeping requirements to briefly describe each in a single document primarily to help licensees readily identify the requirements. The compilation is not a substitute for the regulations, and is not intended to impose any new requirements or technical positions. It is part of NRC`s continuing efforts to comply with the Paperwork Reduction Act of 1980 and the Office of Management and Budget regulations that mandate effective and efficient Federal information resources management programs.

  13. Guide to NRC reporting and recordkeeping requirements. Compiled from requirements in Title 10 of the U.S. Code of Federal Regulations as codified on December 31, 1993; Revision 1

    International Nuclear Information System (INIS)

    This compilation includes in the first two sections the reporting and recordkeeping requirements applicable to US Nuclear Regulatory Commission (NRC) licensees and applicants and to members of the public. It includes those requirements codified in Title 10 of the code of Federal Regulations, Chapter 1, on December 31, 1993. It also includes, in a separate section, any of those requirements that were superseded or discontinued between January 1992 and December 1993. Finally, the appendix lists mailing and delivery addresses for NRC Headquarters and Regional Offices mentioned in the compilation. The Office of Information Resources Management staff compiled this listing of reporting and recordkeeping requirements to briefly describe each in a single document primarily to help licensees readily identify the requirements. The compilation is not a substitute for the regulations, and is not intended to impose any new requirements or technical positions. It is part of NRC's continuing efforts to comply with the Paperwork Reduction Act of 1980 and the Office of Management and Budget regulations that mandate effective and efficient Federal information resources management programs

  14. Decoding Different Patterns in Various Grey Tones Incorporated in the QR Code

    OpenAIRE

    Filip Cvitić; Jesenka Pibernik

    2014-01-01

    Using colors in bar codes causes errors that may adversely affect their readability (Tan etal. 2010), given that the contrast between data and background modules is reduced. Due to the unreliability of using color bar codes, most designers still keep to the limitations placed by Pira International (Smithers Pira) in 2002 (Williams, 2004). Since the contrast between data modules and background modules is the most important aspect in the process of reliable bar code decoding, this paper explore...

  15. Triply heavy tetraquark states with the $QQ\\bar{Q}\\bar{q}$ configuration

    CERN Document Server

    Chen, Kan; Wu, Jing; Liu, Yan-Rui; Zhu, Shi-Lin

    2016-01-01

    In the framework of the color-magnetic interaction, we systematically investigate the mass splittings of the $QQ\\bar{Q}\\bar{q}$ tetraquark states and estimated their rough masses in this work. These systems include the explicitly exotic states $cc\\bar{b}\\bar{q}$ and $bb\\bar{c}\\bar{q}$ and the hidden exotic states $cc\\bar{c}\\bar{q}$, $cb\\bar{b}\\bar{q}$, $bc\\bar{c}\\bar{q}$, and $bb\\bar{b}\\bar{q}$. If a state around the estimated mass region could be observed, its nature as a genuine tetraquark is favored. The strong decay patterns shown here will be helpful to the experimental search for these exotic states.

  16. Strength Degradation of Gfrp Bars

    OpenAIRE

    Bhise, Vikrant Sudhakar

    2002-01-01

    The primary objective of this research was to examine the strength degradation of Glass Fiber Reinforced Polymer (GFRP) bars at high temperature and alkalinity and determine if an Arrhenius type relationship can be used as a means of projecting life. The work done includes a thorough literature review, experiments and development of strength prediction models. The experimental work involves exposure of GFRP bars incased in cement mortar to lime-water solution at 30, 45 and 57°C. Overall 100 ...

  17. Multiprobe quantum spin Hall bars

    OpenAIRE

    Sanvito, Stefano

    2013-01-01

    PUBLISHED We analyze electron transport in multiprobe quantum spin Hall (QSH) bars using the B¨uttiker formalism and draw parallels with their quantum Hall (QH) counterparts. We find that in a QSH bar the measured resistance changes upon introducing side voltage probes, in contrast to the QH case. We also study four- and six-terminal geometries and derive the expressions for the resistances. For these our analysis is generalized from the single-channel to the multi-channel case...

  18. Nanoporosity of Si (100) bars

    Science.gov (United States)

    Novikov, S. N.; Timoshenkov, S. P.; Minaev, V. S.; Goryunova, E. P.; Gerasimenko, N. N.; Smirnov, D. I.

    2016-09-01

    Si(100) samples cut from a typical bar (100 mm in diameter) prepared using industrial technology are studied. Measurements of the electron work function (EWF) show that the size effects in these samples (a reduction in thickness along with a sample's area and the EWF) detected earlier were due to nanostructure porosity that was buried by the technological treatment of a bar's surface. This hidden nanoporosity is assumed to be a manifestation of the secondary crystal structure.

  19. Barred disks in dense environments

    CERN Document Server

    Marinova, I; Heiderman, A; Barazza, F D; Gray, M E; Barden, M; Wolf, C; Peng, C Y; Bacon, D; Balogh, M; Bell, E F; Bohm, A; Caldwell, J A R; Haussler, B; Heymans, C; Jahnke, K; van Kampen, E; Koposov, S; Lane, K; McIntosh, D H; Meisenheimer, K; Rix, H -W; Sanchez, S F; Taylor, A; Wisotzki, L; Zheng, X

    2010-01-01

    We investigate the properties of bright (MV <= -18) barred and unbarred disks in the Abell 901/902 cluster system at z~0.165 with the STAGES HST ACS survey. To identify and characterize bars, we use ellipse-fitting. We use visual classification, a Sersic cut, and a color cut to select disk galaxies, and find that the latter two methods miss 31% and 51%, respectively of disk galaxies identified through visual classification. This underscores the importance of carefully selecting the disk sample in cluster environments. However, we find that the global optical bar fraction in the clusters is ~30% regardless of the method of disk selection. We study the relationship of the optical bar fraction to host galaxy properties, and find that the optical bar fraction depends strongly on the luminosity of the galaxy and whether it hosts a prominent bulge or is bulgeless. Within a given absolute magnitude bin, the optical bar fraction increases for galaxies with no significant bulge component. Within each morphological ...

  20. DIRC - A particle identification system for BaBar

    International Nuclear Information System (INIS)

    The Detection of Internally Reflected Cherenkov light (DIRC) is a novel type of Cherenkov imaging device that has been developed, built and installed as part of the BaBar detector at the asymmetric B-factory PEP-II at SLAC. The DIRC is based on total internal reflection of Cherenkov photons produced and guided within thin, rectangular quartz bars covering the barrel region of BaBar. The photon detector is an array of photomultiplier tubes covering the photon phase space at the backward end of the bars. In its first few months of operation the DIRC performance has been found to achieve the design requirements. This note presents results from cosmic-ray data and an analysis of the first beam collision runs

  1. DIRC - a particle identification system for BaBar

    International Nuclear Information System (INIS)

    The DIRC (an acronym for Detection of Internally Reflected Cherenkov light) is a novel type of Cherenkov imaging device that has been developed, built and installed as part of the BaBar detector at the asymmetric B-factory PEP-II at SLAC. The DIRC is based on total internal reflection of Cherenkov photons produced and guided within thin, rectangular quartz bars covering the barrel region of BaBar. The photon detector is an array of photomultiplier tubes covering the photon phase space at the backward end of the bars. In its first few months of operation the DIRC performance has been found to achieve the design requirements. This note presents results from cosmic ray data and an analysis of the first beam collision runs. (author)

  2. Emissions Inventory Report Summary: Reporting Requirements for the New Mexico Administrative Code, Title 20, Chapter 2, Part 73 (20.2.73 NMAC) for Calendar Year 2003

    Energy Technology Data Exchange (ETDEWEB)

    M. Stockton

    2005-01-01

    Los Alamos National Laboratory is subject to annual emissions-reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. For calendar year 2003, the Technical Area 3 steam plant and the air curtain destructors were the primary sources of criteria air pollutants from the Laboratory, while the air curtain destructors and chemical use associated with research and development activities were the primary sources of volatile organic compounds and hazardous air pollutants. Emissions of beryllium and aluminum were reported for activities permitted under 20.2.72 NMAC. Hazardous air pollutant emissions were reported from chemical use as well as from all combustion sources. In addition, estimates of particulate matter with diameter less than 2.5 micrometers and ammonia were provided as requested by the New Mexico Environment Department, Air Quality Bureau.

  3. INFINITELY VARIABLE TRANSMISSION USING FOUR BAR MECHANISM

    Directory of Open Access Journals (Sweden)

    Dr.N. ARUNKUMAR

    2014-04-01

    Full Text Available Most of the continuously variable transmission systems in automobiles now-a-days are non-positive drives. This means that they cannot be used in heavy vehicles that require very high torque to be transmitted. This new type of infinitely variable transmission is aimed at transmitting high torques by making it a positive drive, thus making continuously variable transmission systems to be suitable for heavy vehicles. Infinitely variable transmission system and continuously variable transmission system are both the same except that there is an extra zero gear ratio in infinitely variable transmission system. This newly developed transmission system is basically a four bar mechanism with variable crank radius which makes it possible to have continuously variable mechanical advantage. The output lever which oscillates in the four bar mechanism is connected to a ratchet mechanism which turns the output shaft intermittently, two four bar mechanisms with a phase difference of 180 degrees is used to avoid the intermittent rotation of the output shaft. A flywheel is used in the output shaft to reduce the fluctuations in both speed and torque.

  4. Field observations of nearshore bar formation

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian;

    2008-01-01

      The formation of an inner nearshore bar was observed during a high-energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics...

  5. /bar p/p collider physics

    Energy Technology Data Exchange (ETDEWEB)

    Green, D.

    1989-03-01

    This note encompasses a set of six lectures given at the summer school held at Campos Do Jordao in January of 1989 near Sao Paulo, Brazil. The intent of the lectures was to describe the physics of /bar p/p at CERN and Fermilab. Particular attention has been paid to making a self contained presentation to a prospective audience of graduate students. Since large Monte Carlo codes might not be available to all members of this audience, great reliance was placed on ''back of the envelope estimates.'' Emphasis was also placed on experimental data rather than theoretical speculation, since predictions for, for example, supersymmetric particle production are easily obtained by transcription of formulae already obtained. 9 refs., 67 figs., 2 tabs.

  6. Gas flow in barred potentials II. Bar Driven Spiral Arms

    CERN Document Server

    Sormani, Mattia C; Magorrian, John

    2015-01-01

    Spiral arms that emerge from the ends of a galactic bar are important in interpreting observations of our and external galaxies. It is therefore important to understand the physical mechanism that causes them. We find that these spiral arms can be understood as kinematic density waves generated by librations around underlying ballistic closed orbits. This is even true in the case of a strong bar, provided the librations are around the appropriate closed orbits and not around the circular orbits that form the basis of the epicycle approximation. An important consequence is that it is a potential's orbital structure that determines whether a bar should be classified as weak or strong, and not crude estimates of the potential's deviation from axisymmetry.

  7. The BaBar Electromagnetic Calorimeter: Status and Performance Improvements

    OpenAIRE

    Bauer, Johannes M.; Group, for the BaBar Collaboration EMC

    2006-01-01

    The electromagnetic calorimeter at the BaBar detector, part of the asymmetric B Factory at SLAC, measures photons in the energy range from 20 MeV to 8 GeV with high resolution. The current status of the calorimeter, now in its seventh year of operation, is being presented, as well as details on improvements made to the analysis code during the last years.

  8. Measurement of B0bar -> D(*)0 K(*)0bar Branching Fractions

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Pappagallo, M; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Best, D S; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Teodorescu, L; Blinov, V E; Bukin, A D; Buzykaev, A R; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, Yu K; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Del Re, D; Hadavand, H K; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Nogowski, R; Petzold, A; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Grenier, P; Latour, E; Thiebaux, C; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Gaillard, J R; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Chai, X; Charles, M J; Mader, W F; Mallik, U; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Petersen, T C; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Brown, C L; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Kelly, M P; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Willocq, S Y; Cowan, R; Koeneke, K; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Potter, C T; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Chauveau, J; David, P; Del Buono, L; La Vaissière, C de; Hamon, O; Hartfiel, B L; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Panetta, J; Biasini, M; Covarelli, R; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Di, E; Marco; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Mayer, B; Vasseur, G; Yéche, C; Zito, M; Park, W; Purohit, M V; Weidemann, A W; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Boyarski, A M; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Azzolini, V; Martínez-Vidal, F; Panvini, R S; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Flood, K T; Graham, M T; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mellado, B; Mihályi, A; Mohapatra, A K; Pan, Y; Pierini, M; Prepost, R; Tan, P; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We present a study of the decays B0bar --> D(*)0 K(*)0bar using a sample of 226 million Y(4S) --> B Bbar decays collected with the BaBar detector at the PEP-II asymmetric-energy e+e-collider at SLAC. We report evidence for the decay of B0 and B0bar mesons to the D*0 K0s final state with an average branching fraction BF(B0-tilde --> D*0 K0bar) := [ BF(B0bar --> D*0 K0bar) + BF(B0 --> D*0 K0) ]/2 = (3.6 +- 1.2 +- 0.3) x 10^-5. Similarly, we measure BF(B0-tilde --> D0 K0bar) := [ BF(B0bar --> D0 K0bar) + BF(B0 --> D0 K0) ]/2 = (5.3 +- 0.7 +- 0.3) x 10^-5 forthe D0 K0s final state. We measure BF(B0bar --> D0 K*0bar) =^(4.0 +- 0.7 +- 0.3) x 10^-5 and set a 90% confidence level upper limit BF(B0bar --> D0bar K*0bar) D0bar K*0bar)/A(B0bar --> D0 K*0bar)| to be less than 0.4 at the 90% confidence level.

  9. Downstream-migrating fluvial point bars in the rock record

    Science.gov (United States)

    Ghinassi, Massimiliano; Ielpi, Alessandro; Aldinucci, Mauro; Fustic, Milovan

    2016-04-01

    Classical models developed for ancient fluvial point bars are based on the assumption that meander bends invariably increase their radius as meander-bend apices migrate in a direction transverse to the channel-belt axis (i.e., meander bend expansion). However, many modern meandering rivers are also characterized by down-valley migration of the bend apex, a mechanism that takes place without a significant change in meander radius and wavelength. Downstream-migrating fluvial point bars (DMFPB) are the dominant architectural element of these types of meander belts. Yet they are poorly known from ancient fluvial-channel belts, since their disambiguation from expansional point bars often requires fully-3D perspectives. This study aims to review DMFPB deposits spanning in age from Devonian to Holocene, and to discuss their main architectural and sedimentological features from published outcrop, borehole and 3D-seismic datasets. Fluvial successions hosting DMFPB mainly accumulated in low accommodation conditions, where channel belts were affected by different degrees of morphological (e.g., valleys) or tectonic (e.g., axial drainage of shortening basins) confinement. In confined settings, bends migrate downstream along the erosion-resistant valley flanks and little or no floodplain deposits are preserved. Progressive floor aggradation (e.g., valley filling) allow meander belts with DMFPB to decrease their degree of confinement. In less confined settings, meander bends migrate downstream mainly after impinging against older, erosion-resistant channel fill mud. By contrast, tectonic confinement is commonly associated with uplifted alluvial plains that prevented meander-bend expansion, in turn triggering downstream translation. At the scale of individual point bars, translational morphodynamics promote the preservation of downstream-bar deposits, whereas the coarser-grained upstream and central beds are less frequently preserved. However, enhanced preservation of upstream-bar

  10. Dynamically possible pattern speeds of double bars

    CERN Document Server

    Maciejewski, Witold

    2009-01-01

    The method to study oscillating potentials of double bars, based on invariant loops, is introduced here in a new way, intended to be more intelligible. Using this method, I show how the orbital structure of a double-barred galaxy (nested bars) changes with the variation of nuclear bar's pattern speed. Not all pattern speeds are allowed when the inner bar rotates in the same direction as the outer bar. Below certain minimum pattern speed orbital support for the inner bar abruptly disappears, while high values of this speed lead to loops that are increasingly round. For values between these two extremes, loops supporting the inner bar extend further out as its pattern speed decreases, and they become more eccentric and pulsate more. These findings do not apply to counter-rotating inner bars.

  11. An algebraic approach to graph codes

    DEFF Research Database (Denmark)

    Pinero, Fernando

    related to the iterative encoding of graph codes with MDS component code. The last chapter deals with affine Grassmann codes and Grassmann codes. We begin with some previously known codes and prove that they are also Tanner codes of the incidence graph of the point–line partial geometry......This thesis consists of six chapters. The first chapter, contains a short introduction to coding theory in which we explain the coding theory concepts we use. In the second chapter, we present the required theory for evaluation codes and also give an example of some fundamental codes in coding...... theory as evaluation codes. Chapter three consists of the introduction to graph based codes, such as Tanner codes and graph codes. In Chapter four, we compute the dimension of some graph based codes with a result combining graph based codes and subfield subcodes. Moreover, some codes in chapter four...

  12. Optimized Solution of Two Bar Truss Design Using Intuitionistic Fuzzy Optimization Technique

    Directory of Open Access Journals (Sweden)

    Samir Dey

    2014-08-01

    Full Text Available The main goal of the structural optimization is to minimize the weight of structure or the vertical deflection of loaded joint while satisfying all design requirements imposed by design codes. In general fuzzy sets are used to analyze the fuzzy structural optimization. In this paper, a planer truss structural model in intuitionistic fuzzy environment has been developed. This paper proposes an intuitionistic fuzzy optimization approach to solve a non-linear programming problem in the context of a structural application. This approximation approach is used to solve structural optimization model with weight as objective function. This intuitionistic fuzzy optimization (IFO approach is illustrated on two-bar truss structural design problem. The result of the intuitionistic fuzzy optimization obtained is compared with the other results of optimization algorithms from the literary sources. It is shown that the proposed intuitionistic fuzzy optimization approach is more efficient than the analogous fuzzy technique for structural design.

  13. New Observables In the Decay Mode \\bar B_d \\-->\\bar K^{0*} \\ell^+ \\ell^-

    Energy Technology Data Exchange (ETDEWEB)

    Egede, U.; /Imperial Coll., London; Hurth, T.; /CERN /SLAC; Matias, J.; Ramon, M.; /Barcelona, IFAE; Reece, W.; /Imperial Coll., London

    2008-08-07

    We discuss the large set of observables available from the angular distributions of the decay {bar B}{sub d} {yields} {bar K}*{sup 0}{ell}{sup +}{ell}{sup -}. We present a NLO analysis of all observables based on the QCD factorization approach in the low-dilepton mass region and an estimate of {Lambda}/m{sub b} corrections. Moreover, we discuss their sensitivity to new physics. We explore the experimental sensitivities at LHCb (10 fb{sup -1}) and SuperLHCb (100 fb{sup -1}) based on a full-angular fit method and explore the sensitivity to right handed currents. We also show that the previously discussed transversity amplitude A{sub T}{sup (1)} cannot be measured at the LHCb experiment or at future B factory experiments as it requires a measurement of the spin of the final state particles.

  14. Bars in the Barkor Street

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In daytime,the Barkor Street is bustling with tourists,pious pilgrims and merchants crowded together.Only when darkness falls does the street become tranquil.Nevertheless,the area surrounding the Barkor Street(from Tibetan Hospital compound extending to east Beijing Road)is then revived by various kinds of bars.

  15. Bars in Beijing Old Town

    Institute of Scientific and Technical Information of China (English)

    GUANYUNZHANG

    2003-01-01

    It's seven pm on a summer's evening by Shichahao Lake,central Beijing.A welcome breeze whispers across the lake,and the ruddy vestiges of sunset linger on roofs and treetops.A low hum emanates from bars on the lakeshore packed with young people chatting,drinking and generally

  16. Galaxy Zoo: Observing Secular Evolution Through Bars

    CERN Document Server

    Cheung, Edmond; Masters, Karen L; Nichol, Robert C; Bosma, A; Bell, Eric F; Faber, S M; Koo, David C; Lintott, Chris; Melvin, Thomas; Schawinski, Kevin; Skibba, Ramin A; Willett, Kyle W

    2013-01-01

    Observations have shown that there is a connection between the presence of a bar and the properties of a galaxy. In a parallel effort, simulations have shown that this connection is consistent with the theory of bar-driven secular evolution. But observational evidence of bar-driven secular evolution has been sparse. In this paper, we use the Galaxy Zoo 2 dataset to look for evidence of this secular evolution. Our sample consists of 13,295 disk galaxies, with an overall bar fraction of 23.6 +/- 0.4%, of which 1,154 barred galaxies also have bar length measurements. These samples are the largest ever used to study the role of bars in disk galaxy evolution. We characterize bars by the bar likelihood, the likelihood a bar is present in a given galaxy, and the bar length. These two bar properties show interesting correlations with the specific star formation rate and the inner central structure of galaxies. Comparing these observations to state-of-the-art simulations of bar evolution, which include live halos and ...

  17. Analysis of a calculation method for the determination of the value of safety or control bars

    International Nuclear Information System (INIS)

    Due to the control or safety bars in a nuclear reactor are constituted by strongly absorbent materials, the Diffusion Theory like tool for the calculation of bar values is not directly applicable, should it use the Transport Theory. However the speed and economy of the Diffusion codes for the reactors calculation, those make attractiveness and by this reason its are used in the determination of characteristic parameters and even in the determination of bar values, not without before to make some theoretical developments that allow to make applicable this theory. The application of the Diffusion Theory in strongly absorbent media is based on the use of some effective cross sections distinct from the real ones obtained when imposing the reason that among the flow and it gradient in the external surface of such media (control element in general, bar type or flagstone) be similar to the one obtained using Transport Theory in all the control region (multiplicative and absorbent media) with those real cross sections. The effective cross sections were obtained of the Leopard-NUMICE cell code which has incorporate the respective calculation theory of effective cross sections. Later these constants its were used in the bidimensional diffusion code Exterminator-II, simulating in it, the distribution of safety or control bars. From the cell code its were also obtained the respective constants of the homogeneous fuel cell. The results as soon as those obtained bar values of the diffusion code, its were compared with some experimental results obtained in the Rφ Swedish reactor of natural uranium and heavy water. In this work an analysis of the bar value of one of them, trying to determine the applicability of the method is made. (Author)

  18. Metal allergy to titanium bars after the Nuss procedure for pectus excavatum.

    Science.gov (United States)

    Sakamoto, Kazuhiro; Ando, Kohei; Noma, Daisuke

    2014-08-01

    The Nuss procedure requires the placement of metal bars in the chest cage to repair pectus excavatum. Metal allergies are one of the complications associated with this procedure. Given that titanium is a biocompatible metal, it induces few allergic symptoms. Therefore, titanium bars are recommended for patients with metal sensitivity. We report the case of a 17-year-old boy with pectus excavatum who had a metal allergy to titanium bars, which occurred after the Nuss procedure. The administration of oral steroids is useful for treating metal allergies. Metal allergies to titanium bars are very rare; however, they can still occur.

  19. Analysis of Al-Cu Bimetallic Bars Properties After Explosive Welding and Rolling in Modified Passes

    Directory of Open Access Journals (Sweden)

    Mróz S.

    2015-04-01

    Full Text Available The paper presents the results of the experimental tests of Al-Cu bimetallic bars rolling process in multi-radial modified passes. The bimetallic bars consist of aluminium core, grade 1050A and copper outer layer, grade M1E. The stocks were round bars with diameter 22 mm with a copper layer share of 15 and 30%. As a result of rolling in four passes, bars of a diameter of about 16.0 mm were obtained. A bimetallic stock was manufactured using an explosive welding method. The use of the designed arrangement of multi-radial modified stretching passes resulted in obtaining Al-Cu bimetallic bars with the required lateral dimensions, an uniform distribution of the cladding layer over the bar perimeter and high quality of shear strength between individual layers.

  20. Going Smokefree Matters - Bars and Restaurants Infographic

    Data.gov (United States)

    U.S. Department of Health & Human Services — Explore the Going Smokefree Matters – Bars and Restaurants Infographic which outlines key facts related to the effects of secondhand smoke exposure in bars and...

  1. Bar, Orliac-de-Bar, Beaumont, Saint–Augustin, Ussel

    OpenAIRE

    Simonnot, Bernard

    2013-01-01

    Identifiant de l'opération archéologique : 2735 Date de l'opération : 2007 (PR) Inventeur(s) : Simonnot Bernard (BEN) La prospection sur les communes de Bar, Orliac-de-Bar, Beaumont et Saint-Augustin n’ayant pas donné pour le moment de nouveaux résultats satisfaisants, une reprise sera nécessaire lors de la prochaine campagne. Ceux découverts récemment demandent une étude plus approfondie. Cette année, la prospection s’est limitée à la partie ouest de la commune d’Ussel, dans la zone de renc...

  2. 75 FR 39663 - Stainless Steel Bar From Brazil: Final Results of Antidumping Duty Administrative Review

    Science.gov (United States)

    2010-07-12

    .... prices to monthly home-market prices (see Preliminary Results, 75 FR at 12516), and we compared the home... Steel Bar From Brazil, 59 FR 66914 (December 28, 1994). These deposit requirements shall remain in... International Trade Administration Stainless Steel Bar From Brazil: Final Results of Antidumping...

  3. Long-duration laboratory experiment of slow development of steady alternate bars

    NARCIS (Netherlands)

    Crosato, A.; Getaneh, A.A.; Desta, F.B.; Uijttewaal, W.S.J.; Le, U.

    2010-01-01

    The current view is that migrating bars are the result of morphodynamic instability in straight or mildly-sinuous alluvial channels and are therefore an inevitable feature of alluvial river beds. Steady bars, instead, require some external forcing or specific morphodynamic conditions to develop. Yet

  4. Developments and trends in fruit bar production and characterization.

    Science.gov (United States)

    Orrego, C E; Salgado, N; Botero, C A

    2014-01-01

    Fruits serve as a source of energy, vitamins, minerals, and dietary fiber. One of the barriers in increasing fruit and vegetables consumption is time required to prepare them. Overall, fruit bars have a far greater nutritional value than the fresh fruits because all nutrients are concentrated and, therefore, would be a convenience food assortment to benefit from the health benefits of fruits. The consumers prefer fruit bars that are more tasted followed by proper textural features that could be obtained by establishing the equilibrium of ingredients, the proper choosing of manufacturing stages and the control of the product final moisture content. Fruit bar preparations may include a mixture of pulps, fresh or dried fruit, sugar, binders, and a variety of minor ingredients. Additionally to the conventional steps of manufacturing (pulping, homogenizing, heating, concentrating, and drying) there have been proposed the use of gelled fruit matrices, dried gels or sponges, and extruders as new trends for processing fruit bars. Different single-type dehydration or combined methods include, in order of increasing process time, air-infrared, vacuum and vacuum-microwave drying convective-solar drying, convective drying, and freeze drying are also suggested as alternative to solar traditional drying stage. The dehydration methods that use vacuum exhibited not only higher retention of antioxidants but also better color, texture, and rehydration capacity. Antioxidant activity resulting from the presence of phenolic compounds in the bars is well established. Besides this, fruit bars are also important sources of carbohydrates and minerals. Given the wide range of bioactive factors in fresh fruits that are preserved in fruit bars, it is plausible that their uptake consumption have a positive effect in reducing the risk of many diseases.

  5. QR CODE GENERATION AND APPLICATION OF ANTI-FALSIFICATION

    OpenAIRE

    Ke LIAO

    2016-01-01

    QR code is 2-dimensional bar code. It is more advanced than bar code, which can only store numbers and characters. QR code can store numbers, characters (including Chinese characters) and even images. It has great data capacity and allows for error correction. It is commonly used to spread information and is sometimes used to achieve website login function. It can even be encrypted that the user has to enter password to get the original information. In my thesis, I come up with an idea tha...

  6. Coding Partitions

    Directory of Open Access Journals (Sweden)

    Fabio Burderi

    2007-05-01

    Full Text Available Motivated by the study of decipherability conditions for codes weaker than Unique Decipherability (UD, we introduce the notion of coding partition. Such a notion generalizes that of UD code and, for codes that are not UD, allows to recover the ``unique decipherability" at the level of the classes of the partition. By tacking into account the natural order between the partitions, we define the characteristic partition of a code X as the finest coding partition of X. This leads to introduce the canonical decomposition of a code in at most one unambiguouscomponent and other (if any totally ambiguouscomponents. In the case the code is finite, we give an algorithm for computing its canonical partition. This, in particular, allows to decide whether a given partition of a finite code X is a coding partition. This last problem is then approached in the case the code is a rational set. We prove its decidability under the hypothesis that the partition contains a finite number of classes and each class is a rational set. Moreover we conjecture that the canonical partition satisfies such a hypothesis. Finally we consider also some relationships between coding partitions and varieties of codes.

  7. Bar instabilities in Coma cluster galaxies

    International Nuclear Information System (INIS)

    The radial distribution of bar versus nonbar galaxies within the Coma cluster shows that a significantly larger fraction of bar galaxies are members of the cluster core. This result can be used either to estimate the time scale for the decay of bar instabilities or to argue that galaxies in the core of Coma are confined within the core

  8. While in Shanghai,Enjoy Unigue Bars!

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Today, bars are nothingnew for people who live inmajor cities. Bars have becomeso common that they have toseek a revolution for survival.It seems the only way tosurvive the fierce market competitionis to take the lead in being special. Asa result, some bars are attractingcustomers with unique features.Among them are:

  9. New code match strategy for wideband code division multiple access code tree management

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Orthogonal variable spreading factor channelization codes are widely used to provide variable data rates for supporting different bandwidth requirements in wideband code division multiple access (WCDMA) systems. A new code match scheme for WCDMA code tree management was proposed. The code match scheme is similar to the existing crowed-first scheme. When choosing a code for a user, the code match scheme only compares the one up layer of the allocated codes, unlike the crowed-first scheme which perhaps compares all up layers. So the operation of code match scheme is simple, and the average time delay is decreased by 5.1%. The simulation results also show that the code match strategy can decrease the average code blocking probability by 8.4%.

  10. BARS curve in Romanian economy

    OpenAIRE

    Emilian Dobrescu

    2015-01-01

    The paper is consacrated to the binomial “public budget-global output” from the BARS curve perspective. The first section characterizes the main conceptual premises of this approach. The second is devoted to empirical analysis, using the statistical data (1990- 2013) for Romania, an European emergent economy: three cointegrating regressions (fully modified least squares, canonical cointegrating regression and dynamic least squares) and three algorithms based on instrumental variables (two-sta...

  11. Galaxy Zoo: Observing secular evolution through bars

    International Nuclear Information System (INIS)

    In this paper, we use the Galaxy Zoo 2 data set to study the behavior of bars in disk galaxies as a function of specific star formation rate (SSFR) and bulge prominence. Our sample consists of 13,295 disk galaxies, with an overall (strong) bar fraction of 23.6% ± 0.4%, of which 1154 barred galaxies also have bar length (BL) measurements. These samples are the largest ever used to study the role of bars in galaxy evolution. We find that the likelihood of a galaxy hosting a bar is anticorrelated with SSFR, regardless of stellar mass or bulge prominence. We find that the trends of bar likelihood and BL with bulge prominence are bimodal with SSFR. We interpret these observations using state-of-the-art simulations of bar evolution that include live halos and the effects of gas and star formation. We suggest our observed trends of bar likelihood with SSFR are driven by the gas fraction of the disks, a factor demonstrated to significantly retard both bar formation and evolution in models. We interpret the bimodal relationship between bulge prominence and bar properties as being due to the complicated effects of classical bulges and central mass concentrations on bar evolution and also to the growth of disky pseudobulges by bar evolution. These results represent empirical evidence for secular evolution driven by bars in disk galaxies. This work suggests that bars are not stagnant structures within disk galaxies but are a critical evolutionary driver of their host galaxies in the local universe (z < 1).

  12. code {poems}

    Directory of Open Access Journals (Sweden)

    Ishac Bertran

    2012-08-01

    Full Text Available "Exploring the potential of code to communicate at the level of poetry," the code­ {poems} project solicited submissions from code­writers in response to the notion of a poem, written in a software language which is semantically valid. These selections reveal the inner workings, constitutive elements, and styles of both a particular software and its authors.

  13. Effect of bars on the galaxy properties

    CERN Document Server

    Vera, Matias; Coldwell, Georgina

    2016-01-01

    Aims: With the aim of assessing the effects of bars on disc galaxy properties, we present an analysis of different characteristics of spiral galaxies with strong, weak and without bars. Method: We identified barred galaxies from the Sloan Digital Sky Survey. By visual inspection, we classified the face-on spiral galaxies brighter than g<16.5 mag into strong-bar, weak-bar and unbarred. In order to provide an appropiate quantification of the influence of bars on galaxy properties, we also constructed a suitable control sample of unbarred galaxies with similar redshift, magnitude, morphology, bulge sizes, and local density environment distributions to that of barred galaxies. Results: We found 522 strong-barred and 770 weak-barred galaxies, representing a 25.82% of the full sample of spiral galaxies, in good agreement with previous studies. We also found that strong-barred galaxies show less efficient star formation activity and older stellar populations compared to weak-barred and unbarred spirals from the c...

  14. Report on FY15 Two-Bar Thermal Ratcheting Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yanli [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jetter, Robert I [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Baird, Seth T [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pu, Chao [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sham, Sam [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-06-22

    Alloy 617 is a reference structural material for very high temperature components of advanced-gas cooled reactors with outlet temperatures in the range of . In order for designers to be able to use Alloy 617 for these high temperature components, Alloy 617 has to be approved for use in Section III (the nuclear section) of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code. A plan has been developed to submit a draft code for Alloy 617 to ASME Section III by 2015. However, the current rules in Subsection NH* for the evaluation of strain limits and creep-fatigue damage using simplified methods based on elastic analysis have been deemed inappropriate for Alloy 617 at temperatures above . The rationale for this exclusion is that at higher temperatures it is not feasible to decouple plasticity and creep deformation, which is the basis for the current simplified rules. This temperature, , is well below the temperature range of interest for this material in High Temperature Gas Cooled Reactor (HTGR) applications. The only current alternative is, thus, a full inelastic analysis which requires sophisticated material models which have been formulated but not yet verified. To address this issue, proposed code rules have been developed which are based on the use of elastic-perfectly plastic (EPP) analysis methods and which are expected to be applicable to very high temperatures. These newly proposed rules also address a long-term objective to provide an option for more simple, comprehensive and easily applied rules than the current so called simplified rules These two-bar tests discussed herein are part of an ongoing series of tests with cyclic loading at high temperatures using specimens representing key features of potential component designs. The initial focus of the two-bar ratcheting test program, to verify the procedure for evaluation of strain limits for Alloy 617 at very high temperatures, has been expanded to respond to guidance from

  15. Two-wave photon Doppler velocimetry measurements in direct impact Hopkinson pressure bar experiments

    Directory of Open Access Journals (Sweden)

    Lea Lewis J.

    2015-01-01

    Full Text Available Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion and faster achievement of force equilibrium. Currently advantages are gained at a significant cost: the fact that input bar data is unavailable removes all information about the striker impacted specimen face, preventing the determination of force equilibrium, and requiring approximations to be made on the sample deformation history. Recently photon Doppler velocimetry methods have been developed, which can replace strain gauges on Hopkinson bars. In this paper we discuss an experimental method and complementary data analysis for using Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system, with the same level of convenience. We discuss extracting velocity and force measurements, and improving the accuracy and convenience of Doppler velocimetry on Hopkinson bars. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains.

  16. Two-wave photon Doppler velocimetry measurements in direct impact Hopkinson pressure bar experiments

    Science.gov (United States)

    Lea, Lewis J.; Jardine, Andrew P.

    2015-09-01

    Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion and faster achievement of force equilibrium. Currently advantages are gained at a significant cost: the fact that input bar data is unavailable removes all information about the striker impacted specimen face, preventing the determination of force equilibrium, and requiring approximations to be made on the sample deformation history. Recently photon Doppler velocimetry methods have been developed, which can replace strain gauges on Hopkinson bars. In this paper we discuss an experimental method and complementary data analysis for using Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system, with the same level of convenience. We discuss extracting velocity and force measurements, and improving the accuracy and convenience of Doppler velocimetry on Hopkinson bars. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains.

  17. Effects of basin bottom slope on jet hydrodynamics and river mouth bar formation

    Science.gov (United States)

    Jiménez-Robles, A. M.; Ortega-Sánchez, M.; Losada, M. A.

    2016-06-01

    River mouth bars are strategic morphological units primarily responsible for the development of entire deltaic systems. This paper addresses the role of receiving basin slope in the hydrodynamics of an exiting sediment-laden turbulent jet and in resulting mouth bar morphodynamics. We use Delft3D, a coupled hydrodynamic and morphodynamic numerical model, along with a theoretical formulation to reproduce the physics of the problem, characterized by a fluvially dominated inlet free of waves and tides. We propose an updated theoretical model with a slope-dependent entrainment coefficient, showing that the rate at which ambient fluid is incorporated into a jet increases with higher basin slopes. Transient results reveal that the magnitude of a basin slope can alter the stability of a jet, favoring the formation of an unstable meandering jet. While a stable jet gives rise to "middle-ground" bars accompanied by diverging channels, a "lunate" mouth bar results from unstable jets. Additional morphodynamic simulations demonstrate that the time required for mouth bar stagnation in its final position increases linearly with the basin slope. In contrast, the distance at which the mouth bar eventually forms decreases until reaching an asymptotic value for slopes higher than 2%. Moreover, the basin slope highly influences sedimentary processes responsible for bar formation: for milder slopes, progradation processes prevail, while in steeper basins aggradation is more relevant. Finally, the minimum relative water depth over a bar crest that forces the flow to bifurcate around a fully developed bar decreases with the basin slope.

  18. A diffractive barcode using diffusion-dot lines to form intersected bright bars with different orientations

    Science.gov (United States)

    Lih Yeh, Sheng; Lin, Shyh Tsong; Wu, Ming Wei

    2010-11-01

    Conventional barcodes can perform well for the data management of commercial products, but they cannot be used for anti-counterfeiting. Therefore, this paper will propose a new barcode with macro- and micro-anti-counterfeiting features. A barcode image for a conventional barcode is composed of parallel bars with different widths, whereas a barcode image for the new barcode is composed of intersected bars with different orientations. Codes for the proposed barcode are composed of bright bars along four possible orientations only. The proposed barcode pattern possesses many parallel diffusion-dot lines. Because diffusion-dot lines can diffract a laser beam to form different bright bar arrangements corresponding to different codes, the proposed barcode is called a 'diffractive barcode' here. There are brightness and length differences between the bars in a bright bar image and the differences are difficult to counterfeit, so the macrofeatures can be used for anti-counterfeiting. On the other hand, because the appearances of the diffusion dots are special and they cannot be reproduced, the microfeatures can be used for anti-counterfeiting. Moreover, both the encoding and decoding work of the diffractive barcode are easy.

  19. A diffractive barcode using diffusion-dot lines to form intersected bright bars with different orientations

    International Nuclear Information System (INIS)

    Conventional barcodes can perform well for the data management of commercial products, but they cannot be used for anti-counterfeiting. Therefore, this paper will propose a new barcode with macro- and micro-anti-counterfeiting features. A barcode image for a conventional barcode is composed of parallel bars with different widths, whereas a barcode image for the new barcode is composed of intersected bars with different orientations. Codes for the proposed barcode are composed of bright bars along four possible orientations only. The proposed barcode pattern possesses many parallel diffusion-dot lines. Because diffusion-dot lines can diffract a laser beam to form different bright bar arrangements corresponding to different codes, the proposed barcode is called a 'diffractive barcode' here. There are brightness and length differences between the bars in a bright bar image and the differences are difficult to counterfeit, so the macrofeatures can be used for anti-counterfeiting. On the other hand, because the appearances of the diffusion dots are special and they cannot be reproduced, the microfeatures can be used for anti-counterfeiting. Moreover, both the encoding and decoding work of the diffractive barcode are easy

  20. An efficient decoding of LDPC codes with low memory requirement%一种低存储量需求的高效LDPC译码方法

    Institute of Scientific and Technical Information of China (English)

    赵岭; 李众; 朱曼洁; 王荣博

    2014-01-01

    An efficient decoding with low memory requirement is presented in this paper. With some extra memory bits,the proposed method could achieve nearly 2 times throughput compared with the conventional decoding. This paper combines min-sum decoding with Sliced Two-phase Message Passing (STMP) decoding, and proposes an overlapping scheme. The accessing of the operation units to the memory units is also discussed in order to analyze the access violation. A group of Low Density Parity Check(LDPC) codes are selected from Chinese Digital Television Terrestrial Multimedia Broadcasting(DTTB) standard, and the throughput gain as well as the ratio of extra memory bits for the proposed decoding over the conventional Two Phase Message Passing(TPMP) are calculated. The calculated results indicate that MS-STMP decoding needs only extra 44%memory bits to achieve 1.85 times throughput in even,which is more efficient than the Overlapped Message Passing(OMP) decoding.%提出了一种高效的低密度奇偶校验码(LDPC)译码方法,相对于传统译码方法,仅需增加少量存储量便能获得接近2倍的吞吐率增益。本文将修正的最小和算法与分组双向消息传递(STMP)译码算法相结合,提出了基于最小和的分组双向消息传递算法(MS-STMP),并给出了相应的迭代交叠方案。随后讨论了交叠过程中2种运算单元对存储器的访问。最后以中国地面数字电视传输(DTTB)标准中使用的一组LDPC码为例,计算了MS-STMP算法相对于传统双向消息传递(TPMP)算法的吞吐率增益和额外增加的存储量。计算结果表明,MS-STMP 算法平均增加44%的存储量,而将吞吐率平均提高到1.85倍,相对于交叠(OMP)算法有明显的优势。

  1. Ribonucleoprotein particles containing non-coding Y RNAs, Ro60, La and nucleolin are not required for Y RNA function in DNA replication.

    Directory of Open Access Journals (Sweden)

    Alexander R Langley

    Full Text Available BACKGROUND: Ro ribonucleoprotein particles (Ro RNPs consist of a non-coding Y RNA bound by Ro60, La and possibly other proteins. The physiological function of Ro RNPs is controversial as divergent functions have been reported for its different constituents. We have recently shown that Y RNAs are essential for the initiation of mammalian chromosomal DNA replication, whereas Ro RNPs are implicated in RNA stability and RNA quality control. Therefore, we investigate here the functional consequences of RNP formation between Ro60, La and nucleolin proteins with hY RNAs for human chromosomal DNA replication. METHODOLOGY/PRINCIPAL FINDINGS: We first immunoprecipitated Ro60, La and nucleolin together with associated hY RNAs from HeLa cytosolic cell extract, and analysed the protein and RNA compositions of these precipitated RNPs by Western blotting and quantitative RT-PCR. We found that Y RNAs exist in several RNP complexes. One RNP comprises Ro60, La and hY RNA, and a different RNP comprises nucleolin and hY RNA. In addition about 50% of the Y RNAs in the extract are present outside of these two RNPs. Next, we immunodepleted these RNP complexes from the cytosolic extract and tested the ability of the depleted extracts to reconstitute DNA replication in a human cell-free system. We found that depletion of these RNP complexes from the cytosolic extract does not inhibit DNA replication in vitro. Finally, we tested if an excess of recombinant pure Ro or La protein inhibits Y RNA-dependent DNA replication in this cell-free system. We found that Ro60 and La proteins do not inhibit DNA replication in vitro. CONCLUSIONS/SIGNIFICANCE: We conclude that RNPs containing hY RNAs and Ro60, La or nucleolin are not required for the function of hY RNAs in chromosomal DNA replication in a human cell-free system, which can be mediated by Y RNAs outside of these RNPs. These data suggest that Y RNAs can support different cellular functions depending on associated proteins.

  2. A secularly evolved model for the Milky Way bar and bulge

    Science.gov (United States)

    Martinez-Valpuesta, Inma; Gerhard, Ortwin

    2015-03-01

    Bars are strong drivers of secular evolution in disk galaxies. Bars themselves can evolve secularly through angular momentum transport, producing different boxy/peanut and X-shaped bulges. Our Milky Way is an example of a barred galaxy with a boxy bulge. We present a self-consistent N-body simulation of a barred galaxy which matches remarkably well the structure of the inner Milky Way deduced from star counts. In particular, features taken as signatures of a second ``long bar`` can be explained by the interaction between the bar and the spiral arms of the galaxy (Martinez-Valpuesta & Gerhard 2011). Furthermore the structural change in the bulge inside l = 4° measured recently from VVV data can be explained by the high-density near-axisymmetric part of the inner boxy bulge (Gerhard & Martinez-Valpuesta 2012). We also compare this model with kinematic data from recent spectroscopic surveys. We use a modified version of the NMAGIC code (de Lorenzi et al. 2007) to study the properties of the Milky Way bar, obtaining an upper limit for the pattern speed of ~ 42 km/sec/kpc. See Fig. 1 for a comparison of one of our best models with BRAVA data (Kunder et al. 2012).

  3. Holographic codes

    CERN Document Server

    Latorre, Jose I

    2015-01-01

    There exists a remarkable four-qutrit state that carries absolute maximal entanglement in all its partitions. Employing this state, we construct a tensor network that delivers a holographic many body state, the H-code, where the physical properties of the boundary determine those of the bulk. This H-code is made of an even superposition of states whose relative Hamming distances are exponentially large with the size of the boundary. This property makes H-codes natural states for a quantum memory. H-codes exist on tori of definite sizes and get classified in three different sectors characterized by the sum of their qutrits on cycles wrapped through the boundaries of the system. We construct a parent Hamiltonian for the H-code which is highly non local and finally we compute the topological entanglement entropy of the H-code.

  4. On the Fraction of Barred Spiral Galaxies

    CERN Document Server

    Nair, Preethi B

    2010-01-01

    We investigate the stellar masses of strongly barred spiral galaxies. Our analysis is based on a sample of ~14000 visually-classified nearby galaxies given in Nair & Abraham 2010(a). The fraction of barred spiral galaxies is found to be a strong function of stellar mass and star formation history, with a minimum near the characteristic mass at which bimodality is seen in the stellar populations of galaxies. We also find bar fractions are very sensitive to the central concentration of galaxies below the transition mass but not above it. This suggests that whatever process is causing the creation of the red and blue sequences is either influencing, or being influenced by, structural changes which manifest themselves in the absence of bars. As a consequence of strong bar fractions being sensitive to the mass range probed, our analysis helps resolve discrepant results on the reported evolution of bar fractions with redshift.

  5. Results from bar pp colliders

    International Nuclear Information System (INIS)

    Recent results bar pp colliders are presented. From elastic scattering experiments at the Tevatron, an average value of σtot = 72.1±2 mb is reported, along with a new measurement of ρ = 0.13 ± 0.7. New measurements of jet direct photon and high pt W and Z production are compared to more precise, higher order predictions from perturbative QCD. Recently available data on the W mass and width give combined values for MW = 80.14±0.27 GeV/c2, and Γ(W) =2. 14 ± 0.08 GeV. From electroweak radiative corrections and MW, one finds Mtop = 130±40 GeV/c2, with a 95% C.L. upper limit at 210 GeV/c2. Current limits on Mtop are presented, along with a review of the prospects for top discovery. From jet data there is no evidence of quark substructure down to the distance scale of 1.4 x 10-17 cm, nor is there evidence for supersymmetry or heavy gauge bosons at bar pp colliders, allowing lower limits on MW, > 520 GeV/c2 and MZ 412 GeV/c2. 66 refs., 26 figs

  6. {bar K}-NUCLEAR Deeply Bound States?

    Science.gov (United States)

    Gal, Avraham

    Following the prediction by Akaishi and Yamazaki of relatively narrow {bar K}-nuclear states, deeply bound by over 100 MeV where the main decay channel {bar K} N -> π Σ is closed, several experimental signals in stopped K- reactions on light nuclei have been interpreted recently as due to such states. In this talk I review (i) the evidence from K--atom data for a deep bar K-nucleus potential, as attractive as V{bar K}(ρ 0) ˜ -(150 - 200) MeV at nuclear matter density, that could support such states; and (ii) the theoretical arguments for a shallow potential, V{bar K}(ρ 0) ˜ -(40 - 60) MeV. I then review a recent work by Mareš, Friedman and Gal in which {bar K}-nuclear bound states are generated dynamically across the periodic table, using a RMF Lagrangian that couples the {bar K} to the scalar and vector meson fields mediating the nuclear interactions. The reduced phase space available for {bar K} absorption from these bound states is taken into account by adding a density- and energy-dependent imaginary term, underlying the corresponding {bar K}-nuclear level widths, with a strength constrained by K--atom fits. Substantial polarization of the core nucleus is found for light nuclei, with central nuclear densities enhanced by almost a factor of two. The binding energies and widths calculated in this dynamical model differ appreciably from those calculated for a static nucleus. These calculations provide a lower limit of Γ {bar K} ˜ 50 ± 10 MeV on the width of nuclear bound states for {bar K} binding energy in the range B{bar K} = 100 - 200 MeV.

  7. Installation of Shimming Bars for CYCIAE-100

    Institute of Scientific and Technical Information of China (English)

    LV; Yin-long; WANG; Zhen-hui; ZHONG; Jun-qing; LIU; Geng-shou

    2012-01-01

    <正>The 100 MeV high intensity proton cyclotron, CYCIAE-100, is the most critical equipment of the BRIF project at CIAE. The shimming bars are used to get the isochronous magnetic field. In the process of magnetic mapping and shimming, the bars should be repeated the installed and disassembly for about 10 times. Each time the installation precision must be ensured. The bars installation schedule and quality are directly related to the BRIF project progress.

  8. Dynamical mechanisms supporting barred-spiral structures

    Science.gov (United States)

    Patsis, P. A.

    We review some recent results of the orbital theory, related with the dynamics of barred-spiral galaxies. The method we use is to study the responses of stellar and gaseous disks when time-independent, external potentials are imposed. These potentials are directly estimated from near-infrared images of disk galaxies. The goal of the work is to detect dynamical mechanisms that reinforce the bars and the spirals in realistic systems. Besides the known mechanism for building bars by quasiperiodic orbits trapped around stable orbits of the {xx} family, we find cases where bars can be supported, to a large extent, by chaotic orbits. These bars are of the ``ansae'' type and their effective potentials are characterized by multiple Lagrangian points roughly along the major axis of the bar. On the other hand the spirals are supported mainly by chaotic orbits and extend usually beyond corotation. We find that the spirals and the outer parts of the bars share the same orbital content. However, we have found also barred-spiral systems with spirals inside corotation, consisting mainly by chaotic orbits. Finally we indicate, that in barred-spiral systems with different pattern speeds for the two components, the dynamics of the spirals can be similar to the dynamics of the spirals of normal spiral galaxies.

  9. Watts Bar Unit 1 cycle 1 zero power physics tests analysis with VERA-CS

    International Nuclear Information System (INIS)

    The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications, including a core simulation capability called VERA-CS. A key milestone for this endeavor is to validate VERA against measurements from operating nuclear power reactors. The first step in validation against plant data is to determine the ability of VERA to accurately simulate the initial startup physics tests for Watts Bar Nuclear Power Station, Unit 1 (WBN1) cycle 1. VERA-CS calculations were performed with the Insilico code developed at Oak Ridge National Laboratory using cross section processing from the SCALE system and the transport capabilities within the Denovo transport code using the SPN method. The calculations were performed with ENDF/B-VII.0 cross sections in 252 groups (collapsed to 23 groups for the 3D transport solution). The key results of the comparison of calculations with measurements include initial criticality, control rod worth critical configurations, control rod worth, differential boron worth, and isothermal temperature reactivity coefficient (ITC). The VERA results for these parameters show good agreement with measurements, with the exception of the ITC, which requires additional investigation. Results are also compared to those obtained with Monte Carlo methods and a current industry core simulator. (author)

  10. Chiral Perturbation Theory and the $\\bar B \\bar B$ Strong Interaction

    CERN Document Server

    Liu, Zhan-Wei; Zhu, Shi-Lin

    2012-01-01

    We have calculated the potentials of the heavy (charmed or bottomed) pseudoscalar mesons up to $O(\\epsilon^2)$ with the heavy meson chiral perturbation theory. We take into account the contributions from the football, triangle, box, and crossed diagrams with the 2$\\phi$ exchange and one-loop corrections to the contact terms. We notice that the total 2$\\phi$-exchange potential alone is attractive in the small momentum region in the channel ${\\bar B \\bar B}^{I=1}$, ${\\bar B_s \\bar B_s}^{I=0}$, or ${\\bar B \\bar B_s}^{I=1/2}$, while repulsive in the channel ${\\bar B \\bar B}^{I=0}$. Hopefully the analytical chiral structures of the potentials may be useful in the extrapolation of the heavy meson interaction from lattice QCD simulation.

  11. Scaleable multi-format QCW pump stacks based on 200W laser diode bars and mini bars at 808nm and 940nm

    Science.gov (United States)

    Berk, Yuri; Karni, Yoram; Klumel, Genady; Openhaim, Yaakov; Cohen, Shalom; Yanson, Dan

    2011-03-01

    Advanced solid state laser architectures place increasingly demanding requirements on high-brightness, low-cost QCW laser diode pump sources, with custom apertures both for side and end rod pumping configurations. To meet this need, a new series of scaleable pump sources at 808nm and 940nm was developed. The stacks, available in multiple output formats, allow for custom aperture filling by varying both the length and quantity of stacked laser bars. For these products, we developed next-generation laser bars based on improved epitaxial wafer designs delivering power densities of 20W/mm of emission aperture. With >200W of peak QCW power available from a full-length 1cm bar, we have demonstrated power scaling to over 2kW in 10-bar stacks with 55% wall plug efficiency. We also present the design and performance of several stack configurations using full-length and reduced-length (mini) bars that demonstrate the versatility of both the bar and packaging designs. We illustrate how the ROBUST HEAD packaging technology developed at SCD is capable of accommodating variable bar length, pitch and quantity for custom rod pumping geometries. The excellent all-around performance of the stacks is supported by reliability data in line with the previously reported 20 Gshot space-grade qualification of SCD's stacks.

  12. Conformity of nuclear construction codes with the requirements of the French order dated December 12, 2005 related to nuclear pressure equipment; Conformite des codes de construction nucleaires avec les exigences de l'arrete du 12 decembre 2005 relatif aux equipements sous pression nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Grandemange, J.M.; Renaut, P. [Areva-NP, Tour AREVA, 92084 - Paris La Defense cedex, (France); Paris, D. [EDF-Ceidre 2 rue Ampere - 93206 SAINT-DENIS Cedex (France); Faidy, C. [EDF-Septen 12/14, Avenue Dutrievoz 69628 Villeurbanne Cedex (France)

    2007-07-01

    The French Decree dated December 13, 1999 transposing the Pressure Equipment Directive (PED) has replaced the fundamental texts on which up to now the regulation for pressure equipment important for the safety of nuclear reactors was also founded. By a Ministerial Order - called 'ESPN Order' - dated December 12, 2005, a new regulation has been issued for nuclear pressure equipment. This text makes reference to the Decree transposing the PED while completing these provisions by supplementary requirements having the objective to provide a very high level of integrity guarantee for equipments which are the most important for safety, and to cover the prevention of radioactive release risks. These regulatory evolutions are presented in the Plenary Session of the ESOPE conference. Referencing the Decree and thus the PED, and including specific provisions, the Ministerial Order implies that the Manufacturers update their documents and, if necessary, their prescriptions in the following two domains: - that of the conformity of Codes and Standards used, generally inspired from the ASME Code Section III, with the essential safety requirements of the PED, - that of the respect of the complementary provisions brought by the ESPN Order. This paper presents the more significant conclusions of this work and the resulting amendments of the RCC-M Code, introduced by the 2007 addendum to that Code. The analysis will lead to specify the same type of complementary requirements to Code when a manufacturer wishes to use the German KTA Rules or the ASME Code Section III. (authors) [French] Le decret du 13 decembre 1999 transposant la directive europeenne (DESP) relative aux equipements sous pression a remplace les textes fondamentaux sur lesquels se fondait egalement jusque la la reglementation des appareils a pression importants pour la surete des reacteurs nucleaires. Par arrete - dit 'arrete ESPN' - du 12 decembre 2005, une nouvelle reglementation a ete dictee. Ce

  13. Impalement wounds of the head and chest by reinforced steel bars with recovery: an unusual case report.

    Science.gov (United States)

    Okumori, M; Futamura, A; Tsukuura, T; Konno, S; Kuramochi, K; Kaya, S; Yamada, F

    1981-03-01

    A 31-year-old male who sustained completely penetrating impalement wounds of the head and chest by reinforced steel bars in a fall at a ferroconcrete building construction with a miraculous survival is reported. The bars were successfully removed; a surgical mallet was required to loosen the bar impacted in the patient's head. After 12 days he was discharged, and he has returned to construction work and is well 3 years postinjury.

  14. A simple technique for removing the Nuss bar with one stabilizer: the lateral approach.

    Science.gov (United States)

    Varela, Patricio; Romanini, Moria Victoria; Asquasciati, Caterina; Torre, Michele

    2010-02-01

    The removal of the substernal bar after the Nuss operation is not always an easy and fast maneuver. Only a few different technical solutions have been described. In the original Nuss technique, the patient was lying on dorsal decubitus and rotated on the side during the procedure. The Noguchi technique avoids the rotation of the patient, but requires two incisions and straightening of the bar before pulling it out the thorax. Recently, another technique was proposed, avoiding the need of straightening the bar, but it is feasible only if two operative beds in a large operative room are available. We propose another approach for the removal of the bar: The patient is lying on the lateral decubitus, only one incision is performed, and the bar is pulled out along the thoracic wall. Twenty-one bars were removed by using the present approach without any complications. The advantages of our approach on the previous techniques are the single incision, no need of rotating the patient, straightening the bar, or having two operative beds. Our approach is not feasible when metallic stabilizers have been used on both sides, but in our experience, this was not necessary in order to stabilize the bar. PMID:19432531

  15. Rings and spirals in barred galaxies. I Building blocks

    CERN Document Server

    Athanassoula, E; Masdemont, J J

    2008-01-01

    In this paper we present building blocks which can explain the formation and properties both of spirals and of inner and outer rings in barred galaxies. We first briefly summarise the main results of the full theoretical description we have given elsewhere, presenting them in a more physical way, aimed to an understanding without the requirement of extended knowledge of dynamical systems or of orbital structure. We introduce in this manner the notion of manifolds, which can be thought of as tubes guiding the orbits. The dynamics of these manifolds can govern the properties of spirals and of inner and outer rings in barred galaxies. We find that the bar strength affects how unstable the L1 and L2 Lagrangian points are, the motion within the 5A5A5Amanifold tubes and the time necessary for particles in a manifold to make a complete turn around the galactic centre. We also show that the strength of the bar, or, to be more precise, of the non-axisymmetric forcing at and somewhat beyond the corotation region, deter...

  16. A study of B0bar --> D(*)0 K(*)bar decays

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Gaillard, J M; Hicheur, A; Karyotakis, Yu; Lees, J P; Tisserand, V; Zghiche, A; Palano, A; Pompili, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Borgland, A W; Breon, A B; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadel, R W; Kadyk, J; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, Michael T; Shelkov, V G; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Steinke, M; Boyd, J T; Chevalier, N; Cottingham, W N; Kelly, M P; Latham, T E; Wilson, F F; Çuhadar-Dönszelmann, T; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Thiessen, D; Khan, A; Kyberd, P; Teodorescu, L; Blinov, A E; Blinov, V E; Druzhinin, V P; Golubev, V B; Ivanchenko, V N; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Yushkov, A N; Best, D; Bruinsma, M; Chao, M; Eschrich, I; Kirkby, D; Lankford, A J; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Buchanan, C; Hartfiel, B L; Foulkes, S D; Gary, J W; Shen, B C; Wang, K; Del Re, D; Hadavand, H K; Hill, E J; MacFarlane, D B; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Dahmes, B; Long, O; Lu, A; Mazur, M A; Richman, J D; Verkerke, W; Beck, T W; Eisner, A M; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Yang, S; Jayatilleke, S M; Mancinelli, G; Meadows, B T; Sokoloff, M D; Abe, T; Blanc, F; Bloom, P; Chen, S; Ford, W T; Nauenberg, U; Olivas, A; Rankin, P; Smith, J G; Zhang, J; Zhang, L; Chen, A; Harton, J L; Soffer, A; Toki, W H; Wilson, R J; Zeng, Q; Altenburg, D; Brandt, T; Brose, J; Dickopp, M; Feltresi, E; Hauke, A; Lacker, H M; Müller-Pfefferkorn, R; Nogowski, R; Otto, S; Petzold, A; Schubert, J; Schubert, Klaus R; Schwierz, R; Spaan, B; Sundermann, J E; Bernard, D; Bonneaud, G R; Brochard, F; Grenier, P; Schrenk, S; Thiebaux, C; Vasileiadis, G; Verderi, M; Bard, D J; Clark, P J; Lavin, D; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Azzolini, V; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Sarti, A; Treadwell, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Patteri, P; Peruzzi, I M; Piccolo, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Crosetti, G; Lo Vetere, M; Macri, M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Bailey, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Won, E; Dubitzky, R S; Langenegger, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Gaillard, J R; Morton, G W; Nash, J A; Nikolich, M B; Taylor, G P; Charles, M J; Grenier, G J; Mallik, U; Cochran, J; Crawley, H B; Lamsa, J; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Yi, J; Biasini, M; Covarelli, R; Pioppi, M; Davier, M; Giroux, X; Grosdidier, G; Höcker, A; Laplace, S; Le Diberder, F R; Lepeltier, V; Lutz, A M; Petersen, T C; Plaszczynski, S; Schune, M H; Tantot, L; Wormser, G; Cheng, C H; Lange, D J; Simani, M C; Wright, D M; Bevan, A J; Chavez, C A; Coleman, J P; Forster, I J; Fry, J R; Gabathuler, Erwin; Gamet, R; Hutchcroft, D E; Parry, R J; Payne, D J; Sloane, R J; Touramanis, C; Back, J J; Harrison, P F; Mohanty, G B; Cowan, G; Flack, R L; Flächer, H U; Green, M G; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Winter, M A; Brown, D; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Hart, P A; Hodgkinson, M C; Lafferty, G D; Lyon, A J; Williams, J C; Farbin, A; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Lillard, V; Roberts, D A; Blaylock, G; Dallapiccola, C; Flood, K T; Hertzbach, S S; Kofler, R; Koptchev, V B; Moore, T B; Saremi, S; Stängle, H; Willocq, S; Cowan, R; Sciolla, G; Sekula, S J; Taylor, F; Yamamoto, R K; Mangeol, D J J; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L M; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Taras, P; Nicholson, H; Cavallo, N; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Wilden, L; Jessop, C P; LoSecco, J M; Allmendinger, T; Gan, K K; Honscheid, K; Hufnagel, D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Brau, J E; Frey, R; Igonkina, O; Potter, C T; Sinev, N B; Strom, D; Torrence, E; Colecchia, F; Dorigo, A; Galeazzi, F; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Tiozzo, G; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; La Vaissière, C de; Del Buono, L; Hamon, O; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Pivk, M; Roos, L; T'Jampens, S; Therin, G; Manfredi, P F; Re, V; Behera, P K; Gladney, L; Guo, Q H; Panetta, J; Angelini, C; Batignani, G; Bettarini, S; Bondioli, M; Bucci, F; Calderini, G; Carpinelli, M; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Martínez-Vidal, F; Neri, N; Paoloni, E; Rama, M; Rizzo, G; Sandrelli, F; Walsh, J; Haire, M; Judd, D; Paick, K; Wagoner, D E; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Miftakov, V; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Pierini, M; Piredda, G; Safai-Tehrani, F; Voena, C; Christ, S; Wagner, G; Waldi, R; Adye, T; De Groot, N; Franek, B J; Geddes, N I; Gopal, G P; Olaiya, E O; Aleksan, Roy; Emery, S; Gaidot, A; Ganzhur, S F; Giraud, P F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; London, G W; Mayer, B; Schott, G; Vasseur, G; Yéche, C; Zito, M; Purohit, M V; Weidemann, A W; Wilson, J R; Yumiceva, F X; Aston, D; Bartoldus, R; Berger, N; Boyarski, A M; Buchmüller, O L; Claus, R; Convery, M R; Cristinziani, M; De Nardo, Gallieno; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Elsen, E E; Fan, S; Field, R C; Glanzman, T; Gowdy, S J; Hadig, T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Petrak, S; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Simi, G; Snyder, A; Soha, A; Stelzer, J; Su, D; Sullivan, M K; Vavra, J; Wagner, S R; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Young, C C; Burchat, Patricia R; Edwards, A J; Meyer, T I; Petersen, B A; Roat, C; Ahmed, S; Alam, M S; Ernst, J A; Saeed, M A; Saleem, M; Wappler, F R; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Kim, H; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Poropat, P; Vuagnin, G; Panvini, R S; Banerjee, Sw; Brown, C M; Fortin, D; Jackson, P D; Kowalewski, R V; Roney, J M; Sobie, R J; Band, H R; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Graham, M; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mihályi, A; Mohapatra, A K; Pan, Y; Prepost, R; Tan, P; Von Wimmersperg-Töller, J H; Wu, J; Wu, S L; Yu, Z; Greene, M G; Neal, H

    2004-01-01

    We present a study of the decays B0bar --> D(*)0 K(*)0bar using a sample of 124 million Upsilon(4S) --> B0bar B0 decays collected with the BaBar detector at the PEP-II asymmetric-energy e+e- collider at SLAC. We report evidence for the decay of B0 and B0bar mesons to the D*0 K_S final state with an average branching fraction BF(B --> D*0 K0bar) = (4.5 +/- 1.9 +/- 0.5) x 10^-5. Similarly, we measure BF(B --> D0 K0bar) = (6.2 +/- 1.2 +/- 0.4) x 10^-5 for the D0 K_S final state. We also measure BF(B0bar --> D0 K*0bar) = (6.2 +/- 1.4 +/- 0.6) x 10^-5 and set a 90% C.L. upper limit BF(B0bar --> D0bar K*0bar) < 4.1 x 10^-5. All results presented in this paper are preliminary.

  17. Orbital Support of Fast and Slow Inner Bars in Double Barred Galaxies

    CERN Document Server

    Maciejewski, Witold

    2010-01-01

    We analyze how the orbital support of the inner bar in a double-barred galaxy (nested bars) depends on the angular velocity (i.e. pattern speed) of this bar. We study orbits in seven models of double bars using the method of invariant loops. The range of pattern speed is covered exhaustively. We find that not all pattern speeds are allowed when the inner bar rotates in the same direction as the outer bar. Below a certain minimum pattern speed orbital support for the inner bar abruptly disappears, while at high values of this speed the orbits indicate an increasingly round bar that looks more like a twist in the nuclear isophotes than a dynamically independent component. For values between these two extremes, orbits supporting the inner bar extend further out as the bar's pattern speed decreases, their corresponding loops become more eccentric, pulsate more, and their rotation becomes increasingly non-uniform, as they speed up and slow down in their motion. Lower pattern speeds also lead to a less coherent bar...

  18. Too Much Bar and Not Enough Mitzvah? A Proposed Research Agenda on Bar/Bat Mitzvah

    Science.gov (United States)

    Schoenfeld, Stuart

    2010-01-01

    Jewish educators are understandably interested in research on how bar/bat mitzvah affect Jewish education or research on what Jewish schools have done to avoid the distortions of a focus on bar/bat mitzvah. Research might also focus on the somewhat different and more ambitious topic of the role that bar/bat mitzvah play in contemporary Jewish…

  19. Test of bar window with internal bars free from the glass surfaces

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1998-01-01

    A sealed glazing unit with 3 horisontal and 3 vertical bars and a reference glazing without bars have been tested in a guarded hotbox. The difference in measured heat loss coefficient between the two test objects is a measure of the thermal influence of the bars. The difference in heat loss...

  20. On the Relation between Spector's Bar Recursion and Modified Bar Recursion

    DEFF Research Database (Denmark)

    Oliva, Paulo Borges

    2002-01-01

    We introduce a variant of Spector's Bar Recursion in finite types to give a realizability interpretation of the classical axiom of dependent choice allowing for the extraction of witnesses from proofs of Sigma_1 formulas in classical analysis. We also give a bar recursive definition of the fan...... functional and study the relationship of our variant of Bar Recursion with others....

  1. K\\bar{K}-Continuum and Isoscalar Nucleon Form Factors

    OpenAIRE

    Hammer, H. -W.; Ramsey-Musolf, M. J.

    1999-01-01

    We analyse the isoscalar vector current form factors of the nucleon using dispersion relations. In addition to the usual vector meson poles, we account for the K\\bar{K}-continuum contribution by drawing upon a recent analytic continuation of KN scattering amplitudes. For the Pauli form factor all strength in the \\phi region is already given by the continuum contribution, whereas for the Dirac form factor additional strength in the \\phi region is required. The pertinent implications for the le...

  2. Tubular stabilizer bars – calculations and construction

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2011-01-01

    Full Text Available The article outlines the calculation methods for tubular stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction, selection and manufacturing of tubular stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method.

  3. Stabilizer bars: Part 1. Calculations and construction

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2010-01-01

    Full Text Available The article outlines the calculation methods for stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction and manufacturing of stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method.

  4. The Bar Tack Machine. Module 16.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on the bar tack machine, one in a series dealing with industrial sewing machines, their attachments, and operation, covers one topic: performing special operations on the bar tack machine. These components are provided: an introduction, directions, an objective, learning activities, student information, a student self-check, and a…

  5. Bar Study Stories. Issues in Prevention

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    This issue of "Issues in Prevention" focuses on the impact of the availability of drinks in licensed establishments, such as bars and taverns on student drinking. This issue contains the following articles: (1) Cheap Drinks at College Bars Can Escalate Student Drinking (John D. Clapp); (2) High Alcohol Outlet Density: A Problem for Campuses and…

  6. Constraints from microlensing on the COBE bar

    Science.gov (United States)

    Zhao, H. S.

    Since the first review of converging evidences for a bar in the center of the Galaxy by de Zeeuw (1992) at the IAU Sym. 153 in Gent five years ago, the Galactic bar idea has been put on a solid footing by an influx of new data (COBE/DIRBE maps, star count data of bulge red clump giants, microlensing optical depth, and bulge stellar proper motions, etc.) and a burst of increasingly sophisticated theoretical models (triaxial luminosity models of Dwek et al. 1994, and Binney, Gerhard & Spergel 1997, steady state stellar bar dynamical model of Zhao 1996, combined luminosity, microlensing and gas kinematics models of Zhao, Rich & Spergel 1996, and Bissantz et al. 1997, etc.), which fit new data and improve upon earlier simple bulge/bar models (Kent 1992, Binney et al. 1991, Blitz & Spergel 1991). While research in this field shifts more and more to constraining the exact phase space and parameter space of the bar, both the non-uniqueness of and the mismatches among bars from different datasets start to show up. I compare the bar from microlensing data with the COBE bar and point out the effects the non-uniqueness.

  7. [Development of cereal bar with pineapple skin].

    Science.gov (United States)

    Fonseca, Renata Siqueira; Del Santo, Victor Rogério; Souza, Gilberto Batista de; Pereira, Cíntia Alessandra Matiucci

    2011-06-01

    The cereal bars are multi-component products consisting of cereals, dried fruit and syrup binder and may be added to the consumable parts of fruits and vegetables which usually are not exploited and have high nutritional value, thereby reducing food waste. It was developed a jam with pineapple skin, which it was utilized in 13.5% in the cereal bar formulation. The cereal bar was sensorial evaluated and had its centesimal and mineral composition determined. The new product achieved average of 8.3 for global impression using 9 points hedonic scale, 91% of acceptance rate and 67% of purchase intent. In this first use of pineapple skin jam as food ingredient it can be concluded that its aggregation in the cereal bar formula is feasible, making an accepted product with fibers, proteins and minerals, as an alternative to traditional cereal bars.

  8. A COMPLETE THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE BAR-BAR TENSILE IMPACT APPARATUS

    Institute of Scientific and Technical Information of China (English)

    万华培; 汪洋; 夏源明

    2003-01-01

    A complete three-dimensional FEM model of the Bar-Bar Tensile Impact Apparatus (BTIA) is constructed, in which the slots in the bars and the glue layers between the bars and the flat-shaped specimen are included. For elastic-plastic specimen material, Ly12cz aluminum alloy, the process of tensile impact experiments is simulated and the matching relation between the specimen geometry and the bars is investigated. Based on the FEM analysis, an iterative method is proposed to design a reasonable specimen geometry for obtaining the true dynamic stress-strain relation for a certain specimen material.

  9. An analytical algorithm to determine allowable ampacities of horizontally installed rectangular bus bars

    Directory of Open Access Journals (Sweden)

    Klimenta Dardan O.

    2016-01-01

    Full Text Available The main objective of this paper is to propose an algorithm for the determination of the allowable ampacities of single rectangular-section bus bars without the occurrence of correction factors. Without correction factors, the ampacity computation of the copper and aluminium bus bars is fully automatized. The analytical algorithm has been implemented in a computer program code that along with the allowable ampacity can compute the bus bar temperature and the individual heat transfer coefficient for each side of the bus bar, as well as their corresponding power losses. Natural and forced convection correlations for rectangular bus bars are applied. Effects of the solar radiation and radiation heat losses from the bus bar surface are taken into consideration as well. The finite element method (FEM has been used for the linear/non-linear steady-state thermal analysis, i.e. for validation of the analytical algorithm. All FEM-based numerical computations were carried out using the COMSOL Heat Transfer Module. [Projekat Ministarstva nauke Republike Srbije, br. TR33046

  10. Excitation of resonant oscillations in a solid bar by 30-MeV protons

    International Nuclear Information System (INIS)

    The mechanical response of a metallic bar to pulses of 30-MeV protons has been investigated. It was found that by making the pulse duration short in comparison with the periods of the low-order harmonics of the bar resonant oscillations, vibration amplitudes of the order of 10-11 cm could be measured. The required energy loss by the beam pulses amounted to about 10-5 J, and very simple theoretical considerations suffice to relate quantitatively the deposition of energy in the bar with the amplitudes of its natural vibrational modes

  11. Conductively cooled high-power high-brightness bars and fiber-coupled arrays

    Science.gov (United States)

    Zhou, Hailong; Mondry, Mark; Fouksman, Michael; Weiss, Eli; Anikitchev, Serguei; Kennedy, Keith; Li, Jun; Zucker, Erik; Rudy, Paul; Kongas, Jukka; Haapamaa, Jouko; Lehkonen, Sami

    2005-03-01

    Solid-state-laser and fiber laser pumping, reprographics, medical and materials processing applications require high power, high-brightness bars and fiber-coupled arrays. Conductively cooled laser diode bars allow customers to simplify system design and reduce operational size, weight, and costs. We present results on next generation high brightness, high reliability bars and fiber-coupled arrays at 790-830 nm, 940 nm and 980 nm wavelengths. By using novel epitaxial structures, we have demonstrated highly reliable 808 nm, 30% fill-factor conductively cooled bars operating at 60W CW mode, corresponding to a linear power density (LPD) of 20 mW/&mum. At 25°C, the bars have shown greater than 50% wall-plug-efficiency (WPE) when operating at 60W. Our novel approach has also reduced the fast-axis divergence FWHM from 31° to less than 24°. These bars have a 50% brightness improvement compared to our standard products with this geometry. At 980nm, we have demonstrated greater than 100W CW from 20% fill-factor conductively cooled bars, corresponding to a LPD of 50 mW/μm. At 25°C, the WPE for 976nm bars consistently peaks above 65% and remains greater than 60% at 100W. We coupled the beam output from those high-brightness bars into fiber-array-packages ("FAPs"), and we also achieved high-brightness and high-efficiency FAPs. We demonstrated 60W from a 600μm core-diameter fiber-bundle with a high WPE of 55%, and a low numerical aperture of 0.115. The brightness of such FAPs is four times higher than our standard high-power 40W FAP products at Coherent. Ongoing life test data suggests an extrapolated lifetime greater than 10,000 hours at 80W CW operating-condition based on 30%FF conductively cooled bar geometry.

  12. An Implementation of Bayesian Adaptive Regression Splines (BARS in C with S and R Wrappers

    Directory of Open Access Journals (Sweden)

    Garrick Wallstrom

    2007-02-01

    Full Text Available BARS (DiMatteo, Genovese, and Kass 2001 uses the powerful reversible-jump MCMC engine to perform spline-based generalized nonparametric regression. It has been shown to work well in terms of having small mean-squared error in many examples (smaller than known competitors, as well as producing visually-appealing fits that are smooth (filtering out high-frequency noise while adapting to sudden changes (retaining high-frequency signal. However, BARS is computationally intensive. The original implementation in S was too slow to be practical in certain situations, and was found to handle some data sets incorrectly. We have implemented BARS in C for the normal and Poisson cases, the latter being important in neurophysiological and other point-process applications. The C implementation includes all needed subroutines for fitting Poisson regression, manipulating B-splines (using code created by Bates and Venables, and finding starting values for Poisson regression (using code for density estimation created by Kooperberg. The code utilizes only freely-available external libraries (LAPACK and BLAS and is otherwise self-contained. We have also provided wrappers so that BARS can be used easily within S or R.

  13. Design and Application of the Reconstruction Software for the BaBar Calorimeter

    Energy Technology Data Exchange (ETDEWEB)

    Strother, Philip David; /Imperial Coll., London

    2006-07-07

    The BaBar high energy physics experiment will be in operation at the PEP-II asymmetric e{sup +}e{sup -} collider in Spring 1999. The primary purpose of the experiment is the investigation of CP violation in the neutral B meson system. The electromagnetic calorimeter forms a central part of the experiment and new techniques are employed in data acquisition and reconstruction software to maximize the capability of this device. The use of a matched digital filter in the feature extraction in the front end electronics is presented. The performance of the filter in the presence of the expected high levels of soft photon background from the machine is evaluated. The high luminosity of the PEP-II machine and the demands on the precision of the calorimeter require reliable software that allows for increased physics capability. BaBar has selected C++ as its primary programming language and object oriented analysis and design as its coding paradigm. The application of this technology to the reconstruction software for the calorimeter is presented. The design of the systems for clustering, cluster division, track matching, particle identification and global calibration is discussed with emphasis on the provisions in the design for increased physics capability as levels of understanding of the detector increase. The CP violating channel B{sup 0} {yields} J/{Psi}K{sub S}{sup 0} has been studied in the two lepton, two {pi}{sup 0} final state. The contribution of this channel to the evaluation of the angle sin 2{beta} of the unitarity triangle is compared to that from the charged pion final state. An error of 0.34 on this quantity is expected after 1 year of running at design luminosity.

  14. $\\bar K$-Nuclear Deeply Bound States?

    CERN Document Server

    Gal, A

    2006-01-01

    Following the prediction by Akaishi and Yamazaki of relatively narrow $\\bar K$-nuclear states, deeply bound by over 100 MeV where the main decay channel $\\bar K N \\to \\pi \\Sigma$ is closed, several experimental signals in stopped $K^-$ reactions on light nuclei have been interpreted recently as due to such states. In this talk I review (i) the evidence from $K^-$-atom data for a {\\it deep} $\\bar K$-nucleus potential, as attractive as $V_{\\bar K}(\\rho_0) \\sim -(150 - 200)$ MeV at nuclear matter density, that could support such states; and (ii) the theoretical arguments for a {\\it shallow} potential, $V_{\\bar K}(\\rho_0) \\sim -(40 - 60)$ MeV. I then review a recent work by Mare\\v{s}, Friedman and Gal in which $\\bar K$-nuclear bound states are generated dynamically across the periodic table, using a RMF Lagrangian that couples the $\\bar K$ to the scalar and vector meson fields mediating the nuclear interactions. Substantial polarization of the core nucleus is found for light nuclei, with central nuclear densities...

  15. NGC 4340 Double Bar + Fossil Nuclear Ring

    CERN Document Server

    Erwin, P; Beckman, J E

    2000-01-01

    NGC 4340 is a double-barred SB0 galaxy in the Virgo cluster (Wozniak et al. 1995, A&AS 111, 115). Here, we show that this galaxy also posseses a luminous stellar nuclear ring of relatively old stars with little or no gas. The ring lies just outside the inner bar, at the probable inner inner Lindblad resonance (IILR) of the outer bar. Careful inspection of the isophotes and unsharp masks shows that the two bars are slightly misaligned, which suggests they may be independently rotating. The bright nuclear ring distorts the isophotes and ellipse fits and is most clearly seen in the unsharp mask (an inner bar also visible). B-R color maps show no features associated with the ring: it is the same color as the surrounding bulge, and thus probably an old, ``fossil'' remnant of an earlier star-formation episode. We use Simien & Prugniel's (1997, A&AS 126, 15) major-axis velocities to compute resonance curves; we use our spectrum along the outer-bar major axis to estimate that bar's pattern speed. The Omeg...

  16. Impact resistance of bar glasses.

    Science.gov (United States)

    Shepherd, J P; Huggett, R H; Kidner, G

    1993-12-01

    Bar glasses are often used as weapons in interpersonal violence. Violence often erupts spontaneously and assailants use objects close to hand as weapons. After an initial national Accident and Emergency Department study to identify glass designs most often implicated in interpersonal violence, the impact resistance of 1-pint beer glasses was tested in a materials laboratory with a Zwick 5102 pendulum impact tester. Both straight-sided (nonik) glasses (annealed and tempered) and handled tankards (annealed) were tested to destruction. The impact resistance of new glasses was compared with that of glasses subjected to wear. The mean impact resistance of new annealed noniks did not differ significantly although new glasses were significantly more resistant than worn glasses (p shards although the thicker bases remained intact. The mean impact resistance of new annealed noniks was 0.5 J, of worn annealed noniks 0.08 J, of tempered new noniks > 4 J, of worn tempered noniks 0.18 J, and of tankards, 1.7 J.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8263994

  17. Speaking Code

    DEFF Research Database (Denmark)

    Cox, Geoff

    development, Speaking Code unfolds an argument to undermine the distinctions between criticism and practice, and to emphasize the aesthetic and political aspects of software studies. Not reducible to its functional aspects, program code mirrors the instability inherent in the relationship of speech......; alternatives to mainstream development, from performances of the live-coding scene to the organizational forms of commons-based peer production; the democratic promise of social media and their paradoxical role in suppressing political expression; and the market’s emptying out of possibilities for free...... expression in the public realm. The book’s line of argument defends language against its invasion by economics, arguing that speech continues to underscore the human condition, however paradoxical this may seem in an era of pervasive computing....

  18. Star Formation Properties in Barred Galaxies(SFB). III. Statistical Study of Bar-driven Secular Evolution using a sample of nearby barred spirals

    CERN Document Server

    Zhou, Zhi-Min; Wu, Hong

    2014-01-01

    Stellar bars are important internal drivers of secular evolution in disk galaxies. Using a sample of nearby spiral galaxies with weak and strong bars, we explore the relationships between the star formation feature and stellar bars in galaxies. We find that galaxies with weak bars tend to be coincide with low concentrical star formation activity, while those with strong bars show a large scatter in the distribution of star formation activity. We find enhanced star formation activity in bulges towards stronger bars, although not predominantly, consistent with previous studies. Our results suggest that different stages of the secular process and many other factors may contribute to the complexity of the secular evolution. In addition, barred galaxies with intense star formation in bars tend to have active star formation in their bulges and disks, and bulges have higher star formation densities than bars and disks, indicating the evolutionary effects of bars. We then derived a possible criterion to quantify the ...

  19. Tidally Induced Bars of Galaxies in Clusters

    Science.gov (United States)

    Łokas, Ewa L.; Ebrová, Ivana; del Pino, Andrés; Sybilska, Agnieszka; Athanassoula, E.; Semczuk, Marcin; Gajda, Grzegorz; Fouquet, Sylvain

    2016-08-01

    Using N-body simulations, we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and a Navarro-Frenk-White dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case, we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger and longer, and have lower pattern speeds for tighter orbits. Only for the tightest orbit are the properties of the bar controlled by the orientation of the tidal torque from the cluster at pericenter. The mechanism behind the formation of the bars is the angular momentum transfer from the galaxy stellar component to its halo. All of the bars undergo extended periods of buckling instability that occur earlier and lead to more pronounced boxy/peanut shapes when the tidal forces are stronger. Using all simulation outputs of galaxies at different evolutionary stages, we construct a toy model of the galaxy population in the cluster and measure the average bar strength and bar fraction as a function of clustercentric radius. Both are found to be mildly decreasing functions of radius. We conclude that tidal forces can trigger bar formation in cluster cores, but not in the outskirts, and thus can cause larger concentrations of barred galaxies toward the cluster center.

  20. Study of the charmed baryonic decays $\\bar{B}^0\\to\\Sigma_{\\mathrm{c}}^{++}\\bar{p}\\pi^-$ and $\\bar{B}^0\\to\\Sigma_{\\mathrm{c}}^{0}\\bar{p}\\pi^+$

    CERN Document Server

    Abe, K; Aihara, H; Anipko, D; Aoki, K; Arakawa, T; Arinstein, K; Asano, Y; Aso, T; Aulchenko, V M; Aushev, T; Aziz, T; Bahinipati, S; Bakich, A M; Balagura, V; Ban, Y; Banerjee, S; Barberio, E; Barbero, M; Bay, A; Bedny, I; Belous, K S; Bitenc, U; Bizjak, I; Blyth, S; Bondar, A; Bozek, A; Bracko, M; Brodzicka, J; Browder, T E; Chang, M C; Chang, P; Chao, Y; Chen, A; Chen, K F; Chen, W T; Cheon, B G; Chistov, R; Choi, J H; Choi, S K; Choi, Y; Choi, Y K; Chuvikov, A; Cole, S; Dalseno, J; Danilov, M; Dash, M; Dowd, R; Dragic, J; Drutskoy, A; Eidelman, S; Enari, Y; Epifanov, D A; Fratina, S; Fujii, H; Fujikawa, M; Gabyshev, N; Garmash, A; Gershon, T; Go, A; Gokhroo, G; Goldenzweig, P; Golob, B; Gorisek, A; Grosse-Perdekamp, M; Guler, H; Ha, H; Haba, J; Hara, K; Hara, T; Hasegawa, Y; Hastings, N C; Hayasaka, K; Hayashii, H; Hazumi, M; Heffernan, D; Higuchi, T; Hinz, L; Hokuue, T; Hoshi, Y; Hoshina, K; Hou, S; Hou, W S; Hsiung, Y B; Igarashi, Y; Iijima, T; Ikado, K; Imoto, A; Inami, K; Ishikawa, A; Ishino, H; Itoh, K; Itoh, R; Iwabuchi, M; Iwasaki, M; Iwasaki, Y; Jacoby, C; Jones, M; Kakuno, H; Kang, J H; Kang, J S; Kapusta, P; Kataoka, S U; Katayama, N; Kawai, H; Kawasaki, T; Khan, H R; Kibayashi, A; Kichimi, H; Kikuchi, N; Kim, H J; Kim, H O; Kim, J H; Kim, S K; Kim, T H; Kim, Y J; Kinoshita, K; Kishimoto, N; Korpar, S; Kozakai, Y; Krizan, P; Krokovnyi, P P; Kubota, T; Kulasiri, R; Kumar, R; Kuo, C C; Kurihara, E; Kusaka, A; Kuzmin, A; Kwon, Y J; Lange, J S; Leder, G; Lee, J; Lee, S E; Lee, Y J; Lesiak, T; Li, J; Limosani, A; Lin, C Y; Lin, S W; Liu, Y; Liventsev, D; MacNaughton, J; Majumder, G; Mandl, F; Marlow, D; Matsumoto, T; Matyja, A; McOnie, S; Medvedeva, T; Mikami, Y; Mitaroff, W A; Miyabayashi, K; Miyake, H; Miyata, H; Miyazaki, Y; Mizuk, R; Mohapatra, D; Moloney, G R; Mori, T; Müller, J; Murakami, A; Nagamine, T; Nagasaka, Y; Nakagawa, T; Nakahama, Y; Nakamura, I; Nakano, E; Nakao, M; Nakazawa, H; Natkaniec, Z; Neichi, K; Nishida, S; Nishimura, K; Nitoh, O; Noguchi, S; Nozaki, T; Ogawa, A; Ogawa, S; Ohshima, T; Okabe, T; Okuno, S; Olsen, S L; Ono, S; Ostrowicz, W; Ozaki, H; Pakhlov, P; Pakhlova, G; Palka, H; Park, C W; Park, H; Park, K S; Parslow, N; Peak, L S; Pernicka, M; Pestotnik, R; Peters, M; Piilonen, L E; Poluektov, A; Ronga, F J; Root, N; Rorie, J; Rózanska, M; Sahoo, H; Saitoh, S; Sakai, Y; Sakamoto, H; Sakaue, H; Sarangi, T R; Sato, N; Satoyama, N; Sayeed, K; Schietinger, T; Schneider, O; Schonmeier, P; Schümann, J; Schwanda, C; Schwartz, A J; Seidl, R; Seki, T; Senyo, K; Sevior, M E; Shapkin, M; Shen, Y T; Shibuya, H; Shwartz, B; Sidorov, V; Singh, J B; Sokolov, A; Somov, A; Soni, N; Stamen, R; Stanic, S; Staric, M; Stöck, H; Sugiyama, A; Sumisawa, K; Sumiyoshi, T; Suzuki, S; Suzuki, S Y; Tajima, O; Takada, N; Takasaki, F; Tamai, K; Tamura, N; Tanaka, M; Taylor, G N; Teramoto, Y; Tian, X C; Tikhomirov, I; Trabelsi, K; Tsai, Y T; Tse, Y F; Tsuboyama, T; Tsukamoto, T; Uchida, K; Uchida, Y; Uehara, S; Uglov, T; Ueno, K; Unno, Y; Uno, S; Urquijo, P; Ushiroda, Y; Usov, Yu; Varner, G; Varvell, K E; Villa, S; Wang, C C; Wang, C H; Wang, M Z; Watanabe, M; Watanabe, Y; Wicht, J; Widhalm, L; Wiechczynski, J; Won, E; Wu, C H; Xie, Q L; Yabsley, B D; Yamaguchi, A; Yamamoto, H; Yamamoto, S; Yamashita, Y; Yamauchi, M; Heyoung Yang; Yoshino, S; Yuan, Y; Yusa, Y; Zang, S L; Zhang, C C; Zhang, J; Zhang, L M; Zhang, Z P; Zhilich, V; Ziegler, T; Zupanc, A; Zürcher, D

    2006-01-01

    We study the three-body charmed baryonic decays $\\bar{B}^0\\to\\Sigma_{\\mathrm{c}}^{++}\\bar{p}\\pi^-$ and $\\bar{B}^0\\to\\Sigma_{\\mathrm{c}}^{0}\\bar{p}\\pi^+$ in the four-body final state $\\bar{B}^0\\to\\Lambda_{\\mathrm{c}}^{+}\\bar{p}\\pi^+\\pi^-$, based on a data sample of 357 fb$^{-1}$ accumulated at the $\\Upsilon(4S)$ with the Belle detector at the KEKB asymmetric $e^+e^-$ collider. We measure branching fractions: ${\\cal B} (\\bar{B}^0\\to\\Sigma_{\\mathrm{c}}(2455)^{++}\\bar{p}\\pi^-)$=(\

  1. First Measurement of σ(gg → t$\\bar{t}$)/σ(p$\\bar{p}$ → t$\\bar{t}$)

    Energy Technology Data Exchange (ETDEWEB)

    Alamdari, Shabnaz Pashapour [Univ. of Toronto, ON (Canada)

    2008-01-01

    The work presented here is the first measurement of the fraction of top quark pair production through gluon-gluon fusion. We use an integrated luminosity of 0.96 ± 0.06 fb-1 of p{bar p} collisions at √s of 1.96 TeV collected by the CDF II detector. We select t$\\bar{t}$ candidates by identifying a high-pT lepton candidate, a large missing ET as evidence for a neutrino candidate and at least four high ET jets, one of which has to be identified as originating from a b quark. The challenge is to discriminate between the two production processes with the identical final state, gg → t$\\bar{t}$ and q$\\bar{p}$ → t$\\bar{t}$. We take advantage of the fact that compared to a quark, a gluon is more likely to radiate a low momentum gluon and therefore, one expects a larger number of charged particles with low pT in a process involving more gluons. Given the large uncertainties associated with the modeling of the low pT charged particle multiplicity, a data-driven technique was employed. Using calibration data samples, we show there exists a clear correlation between the observed average number of low pT charged particles and the average number of gluons involved in the production process predicted by Monte Carlo calculations. Given the correlation, one can identify low pT charged particle multiplicity distributions associated with specific average number of gluons. The W + 0 jet sample and dijets sample with leading jet ET in the range of 80-100 GeV are used to find no-gluon and gluon-rich low p{sub T} charged particle multiplicity distributions, respectively. Using these no-gluon and gluon-rich distributions in a likelihood fit, we find the fraction of gluon-rich events in t{bar t} candidates. This fraction has contributions from the signal and background events. Taking into account these contributions and the gg → t$\\bar{t}$ and q$\\bar{q}$ → t$\\bar

  2. Advances in 808nm high power diode laser bars and single emitters

    Science.gov (United States)

    Morales, J.; Lehkonen, S.; Liu, G.; Schleuning, D.; Acklin, B.

    2016-03-01

    Key applications for 780-830nm high power diode lasers include the pumping of various gas, solid state, and fiber laser media; medical and aesthetic applications including hair removal; direct diode materials processing; and computer-to-plate (CtP) printing. Many of these applications require high brightness fiber coupled beam delivery, in turn requiring high brightness optical output at the bar and chip level. Many require multiple bars per system, with aggregate powers on the order of kWs, placing a premium on high power and high power conversion efficiency. This paper presents Coherent's recent advances in the production of high power, high brightness, high efficiency bars and chips at 780-830nm. Results are presented for bars and single emitters of various geometries. Performance data is presented demonstrating peak power conversion efficiencies of 63% in CW mode. Reliability data is presented demonstrating <50k hours lifetime for products including 60W 18% fill factor and 80W 28% fill factor conduction cooled bars, and <1e9 shots lifetime for 500W QCW bars.

  3. The Aster code; Code Aster

    Energy Technology Data Exchange (ETDEWEB)

    Delbecq, J.M

    1999-07-01

    The Aster code is a 2D or 3D finite-element calculation code for structures developed by the R and D direction of Electricite de France (EdF). This dossier presents a complete overview of the characteristics and uses of the Aster code: introduction of version 4; the context of Aster (organisation of the code development, versions, systems and interfaces, development tools, quality assurance, independent validation); static mechanics (linear thermo-elasticity, Euler buckling, cables, Zarka-Casier method); non-linear mechanics (materials behaviour, big deformations, specific loads, unloading and loss of load proportionality indicators, global algorithm, contact and friction); rupture mechanics (G energy restitution level, restitution level in thermo-elasto-plasticity, 3D local energy restitution level, KI and KII stress intensity factors, calculation of limit loads for structures), specific treatments (fatigue, rupture, wear, error estimation); meshes and models (mesh generation, modeling, loads and boundary conditions, links between different modeling processes, resolution of linear systems, display of results etc..); vibration mechanics (modal and harmonic analysis, dynamics with shocks, direct transient dynamics, seismic analysis and aleatory dynamics, non-linear dynamics, dynamical sub-structuring); fluid-structure interactions (internal acoustics, mass, rigidity and damping); linear and non-linear thermal analysis; steels and metal industry (structure transformations); coupled problems (internal chaining, internal thermo-hydro-mechanical coupling, chaining with other codes); products and services. (J.S.)

  4. Possible $D\\bar{D}$ and $B\\bar{B}$ Molecular states in a chiral quark model

    CERN Document Server

    Li, M T; Dong, Y B; Zhang, Z Y

    2012-01-01

    We perform a systematic study of the bound state problem of $D\\bar{D}$ and $B\\bar{B}$ systems by using effective interaction in our chiral quark model. Our results show that both the interactions of $D\\bar{D}$ and $B\\bar{B}$ states are attractive, which consequently result in $I^G(J^{PC})=0^+(0^{++})$ $D\\bar{D}$ and $B\\bar{B}$ bound states.

  5. Optimal codes as Tanner codes with cyclic component codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Pinero, Fernando; Zeng, Peng

    2014-01-01

    In this article we study a class of graph codes with cyclic code component codes as affine variety codes. Within this class of Tanner codes we find some optimal binary codes. We use a particular subgraph of the point-line incidence plane of A(2,q) as the Tanner graph, and we are able to describe...... the codes succinctly using Gröbner bases....

  6. MCNP code

    International Nuclear Information System (INIS)

    The MCNP code is the major Monte Carlo coupled neutron-photon transport research tool at the Los Alamos National Laboratory, and it represents the most extensive Monte Carlo development program in the United States which is available in the public domain. The present code is the direct descendent of the original Monte Carlo work of Fermi, von Neumaum, and Ulam at Los Alamos in the 1940s. Development has continued uninterrupted since that time, and the current version of MCNP (or its predecessors) has always included state-of-the-art methods in the Monte Carlo simulation of radiation transport, basic cross section data, geometry capability, variance reduction, and estimation procedures. The authors of the present code have oriented its development toward general user application. The documentation, though extensive, is presented in a clear and simple manner with many examples, illustrations, and sample problems. In addition to providing the desired results, the output listings give a a wealth of detailed information (some optional) concerning each state of the calculation. The code system is continually updated to take advantage of advances in computer hardware and software, including interactive modes of operation, diagnostic interrupts and restarts, and a variety of graphical and video aids

  7. ANIMAL code

    International Nuclear Information System (INIS)

    This report describes ANIMAL, a two-dimensional Eulerian magnetohydrodynamic computer code. ANIMAL's physical model also appears. Formulated are temporal and spatial finite-difference equations in a manner that facilitates implementation of the algorithm. Outlined are the functions of the algorithm's FORTRAN subroutines and variables

  8. Nuss bar procedure: past, present and future

    Science.gov (United States)

    Obermeyer, Robert J.; Kelly, Robert E.

    2016-01-01

    Repair of pectus excavatum began at the beginning of the 20th century before endotracheal intubation was standard practice. Surgeons therefore developed techniques that corrected the deformity using an open procedure via the anterior chest wall. Initial techniques were unsatisfactory, but by the 1930s the partial rib resection and sternal osteotomy technique had been developed and was used in combination with external traction post-operatively to prevent the sternum from sinking back into the chest. In 1949, Ravitch recommended complete resection of the costal cartilages and complete mobilization of the sternum without external traction, and in 1961 Adkins and Blades introduced the concept of a substernal strut for sternal support. The wide resection resulted in a very rigid anterior chest wall, and in some instances, the development of asphyxiating chondrodystrophy. The primary care physicians therefore became reluctant to refer the patients for repair. In 1987, Nuss developed a minimally invasive technique that required no cartilage or sternal resection and relied only on internal bracing by means of a sub-sternal bar, which is inserted into the chest through two lateral thoracic incisions and guided across the mediastinum with the help of thoracoscopy. After publication of the procedure in 1998, it became widely accepted and a flood of new patients suddenly started to appear, which allowed for rapid improvements and modifications of the technique. New instruments were developed specifically for the procedure, complications were recognized, and the steps taken to prevent them included the development of a stabilizer and the use of pericostal sutures to prevent bar displacement. Various options were developed for sternal elevation prior to mediastinal dissection to prevent injury to the mediastinal structures, allergy testing was implemented, and pain management improved. The increased number of patients coming for repair permitted studies of cardiopulmonary

  9. Practices in Code Discoverability: Astrophysics Source Code Library

    Science.gov (United States)

    Allen, A.; Teuben, P.; Nemiroff, R. J.; Shamir, L.

    2012-09-01

    Here we describe the Astrophysics Source Code Library (ASCL), which takes an active approach to sharing astrophysics source code. ASCL's editor seeks out both new and old peer-reviewed papers that describe methods or experiments that involve the development or use of source code, and adds entries for the found codes to the library. This approach ensures that source codes are added without requiring authors to actively submit them, resulting in a comprehensive listing that covers a significant number of the astrophysics source codes used in peer-reviewed studies. The ASCL now has over 340 codes in it and continues to grow. In 2011, the ASCL has on average added 19 codes per month. An advisory committee has been established to provide input and guide the development and expansion of the new site, and a marketing plan has been developed and is being executed. All ASCL source codes have been used to generate results published in or submitted to a refereed journal and are freely available either via a download site or from an identified source. This paper provides the history and description of the ASCL. It lists the requirements for including codes, examines the advantages of the ASCL, and outlines some of its future plans.

  10. KENO-V code

    International Nuclear Information System (INIS)

    The KENO-V code is the current release of the Oak Ridge multigroup Monte Carlo criticality code development. The original KENO, with 16 group Hansen-Roach cross sections and P1 scattering, was one ot the first multigroup Monte Carlo codes and it and its successors have always been a much-used research tool for criticality studies. KENO-V is able to accept large neutron cross section libraries (a 218 group set is distributed with the code) and has a general P/sub N/ scattering capability. A supergroup feature allows execution of large problems on small computers, but at the expense of increased calculation time and system input/output operations. This supergroup feature is activated automatically by the code in a manner which utilizes as much computer memory as is available. The primary purpose of KENO-V is to calculate the system k/sub eff/, from small bare critical assemblies to large reflected arrays of differing fissile and moderator elements. In this respect KENO-V neither has nor requires the many options and sophisticated biasing techniques of general Monte Carlo codes

  11. Blast Quantification Using Hopkinson Pressure Bars.

    Science.gov (United States)

    Clarke, Samuel D; Fay, Stephen D; Rigby, Samuel E; Tyas, Andrew; Warren, James A; Reay, Jonathan J; Fuller, Benjamin J; Gant, Matthew T A; Elgy, Ian D

    2016-07-05

    Near-field blast load measurement presents an issue to many sensor types as they must endure very aggressive environments and be able to measure pressures up to many hundreds of megapascals. In this respect the simplicity of the Hopkinson pressure bar has a major advantage in that while the measurement end of the Hopkinson bar can endure and be exposed to harsh conditions, the strain gauge mounted to the bar can be affixed some distance away. This allows protective housings to be utilized which protect the strain gauge but do not interfere with the measurement acquisition. The use of an array of pressure bars allows the pressure-time histories at discrete known points to be measured. This article also describes the interpolation routine used to derive pressure-time histories at un-instrumented locations on the plane of interest. Currently the technique has been used to measure loading from high explosives in free air and buried shallowly in various soils.

  12. ${{\\bar{d}} - {\\bar{u}}}$ Flavor Asymmetry in the Proton in Chiral Effective Field Theory

    Energy Technology Data Exchange (ETDEWEB)

    Salamu, Y. [Institute of High Energy Physics, CAS, Beijing, 100049, China; Ji, Cheung-Ryong [North Carolina State University, Raleigh, NC; Melnitchouk, Wally [Jefferson Lab, Newport News, VA; Wang, P. [Theoretical Physics Center for Science Facilities, CAS, Beijing, 100049, China

    2015-09-01

    The ${\\bar d - \\bar u}$ flavor asymmetry in the proton arising from pion loops is computed using chiral effective field theory. The calculation includes both nucleon and Δ intermediate states, and uses both the fully relativistic and heavy baryon frameworks. The x dependence of ${\\bar d - \\bar u}$ extracted from the Fermilab E866 Drell–Yan data can be well reproduced in terms of a single transverse momentum cutoff parameter regulating the ultraviolet behavior of the loop integrals. In addition to the distribution at x > 0, corrections to the integrated asymmetry from zero momentum contributions are computed, which arise from pion rainbow and bubble diagrams at x = 0. These have not been accounted for in previous analyses, and can make important contributions to the lowest moment of ${\\bar d-\\bar u}$ .

  13. Explosive Formulation Code Naming SOP

    Energy Technology Data Exchange (ETDEWEB)

    Martz, H. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-19

    The purpose of this SOP is to provide a procedure for giving individual HME formulations code names. A code name for an individual HME formulation consists of an explosive family code, given by the classified guide, followed by a dash, -, and a number. If the formulation requires preparation such as packing or aging, these add additional groups of symbols to the X-ray specimen name.

  14. Intelligent bar chart plagiarism detection in documents.

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Rehman, Amjad; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

  15. The DIRC detector at BaBar

    International Nuclear Information System (INIS)

    A dedicated particle identification system based on the Detection of Internally Reflected Cherenkov (DIRC) light will be used in the BaBar detector. We provide an overview of the DIRC concept, design, and expected performance of the production device and a status report on its construction and commissioning. The DIRC is expected to be operating in the BaBar detector on beam line at the PEP-II B Factory in late spring 1999

  16. Loss of power of a 220 VAC safety bus bar at Embalse NPP

    International Nuclear Information System (INIS)

    Embalse nuclear power plant is located at the Cordoba Province, 5 kilometres Southern the town of Embalse. It is equipped with one 600 MWe CANDU reactor. At the time of the event, which occurred on 11 October 2004, the plant was operating normally at full power. The Embalse nuclear power plant electrical power system buses are classified, in reliability decreasing order, into the following four different levels: 1) Class I: uninterrupted direct current supplies for safety related and other essential loads; 2) Class II: uninterrupted alternating current supplies for safety related and other essential loads; 3) Class III: alternating current supplies to essential auxiliaries which can tolerate the short interruption required until to start up and load the on-site standby generators and 4) Class IV: normal alternating current supplies to auxiliaries which can tolerate long duration interruptions without affecting personnel or equipment safety (Class IV is the normal source of power to Class III system). In particular, the Class II 220 VAC uninterrupted monophasic safety bus bars are composed by three 220 VAC subsystems powered by the following two sources of power: Class I uninterrupted safety bus bars (5551 BUA, BUB and BUC bars) and Class III secondary distribution 5433-MCC5 and MCC6. The Class II 220 VAC bus bars are normally powered from Class I bus bars through static monophasic inverters. Beside, in a static monophasic out of service case, Class II bus bar affected could be powered from Class III bus bars via a transformer stabilizer. Class II bus bars supplies power to both control computers and the AC instrumentation and control devices. When 220 VAC (Class II) 5542-BUC-monophasic-inverter failure was coincident with a subsequent independent failure to transfer to the Class III through static commuter 5542-SVR-C, a loss of the 220 VAC uninterrupted monophasic safety bus bar (Class II) event was caused. (author)

  17. The Influence of Bars on Nuclear Activity

    CERN Document Server

    Ho, L C; Sargent, W L W; Ho, Luis C.; Filippenko, Alexei V.; Sargent, Wallace L. W.

    1997-01-01

    We test ideas on fueling of galactic nuclei by bar-driven inflow by comparing the detection rate and intensity of nuclear H II regions and AGNs among barred and unbarred galaxies in a sample of over 300 spirals selected from our recent optical spectroscopic survey of nearby galaxies. Among late-type spirals (Sc-Sm), but not early-type (S0/a-Sbc), we observe in the barred group a very marginal increase in the detection rate of H II nuclei and a corresponding decrease in the incidence of AGNs. The minor differences in the detection rates, however, are statistically insignificant, most likely stemming from selection effects and not from a genuine influence from the bar. The presence of a bar seems to have no noticeable impact on the likelihood of a galaxy to host either nuclear star formation or an AGN. The nuclei of early-type barred spirals do exhibit measurably higher star-formation rates than their unbarred counterparts, as indicated by either the luminosity or the equivalent width of H-alpha emission. By co...

  18. Hot Disks And Delayed Bar Formation

    CERN Document Server

    Sheth, Kartik; Elmegreen, Debra Meloy; Elmegreen, Bruce G; Athanassoula, E; Weiner, Ben

    2012-01-01

    We present observational evidence for the inhibition of bar formation in dispersion-dominated (dynamically hot) galaxies by studying the relationship between galactic structure and host galaxy kinematics in a sample of 257 galaxies between 0.1 $<$ z $\\leq$ 0.84 from the All-Wavelength Extended Groth Strip International Survey (AEGIS) and the Deep Extragalactic Evolutionary Probe 2 (DEEP2) survey. We find that bars are preferentially found in galaxies that are massive and dynamically cold (rotation-dominated) and on the stellar Tully-Fisher relationship, as is the case for barred spirals in the local Universe. The data provide at least one explanation for the steep ($\\times$3) decline in the overall bar fraction from z=0 to z=0.84 in L$^*$ and brighter disks seen in previous studies. The decline in the bar fraction at high redshift is almost exclusively in the lower mass (10 $<$ log M$_{*}$(\\Msun)$<$ 11), later-type and bluer galaxies. A proposed explanation for this "downsizing" of the bar formation ...

  19. Possible Signatures of New Physics in e+e- and bar bar{p}p Collisions

    Science.gov (United States)

    Senju, H.

    1998-12-01

    A preon model with preonic charge predicts many unique new particles. Among them, several are expected to be relatively light, including the fermion lS, which is a stable WIMP, bosons U0 and U+ and the lepto-quark fermion q'. The production of these particles in e+e- and bar{p}p collisions is discussed, focusing on e+e- --> UlS(e) and bar{p}p --> bar{q}'q' + X. A signature of the latter is dilepton + 2 charm jets + missing energy. A discussion on reported unusual events in the dilepton + jets sample is made based on bar{q}'q' production.

  20. $\\bar d - \\bar u$ asymmetry in the proton in chiral effective theory

    Energy Technology Data Exchange (ETDEWEB)

    Salamu, Yusupujiang [Institute of High Energy Physics, CAS, Beijing (China); Ji, Chueng -Ryong [North Carolina State Univ., Raleigh, NC (United States); Melnitchouk, W. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Wang, P. [Institute of High Energy Physics, Beijing (China); Theoretical Physics Center for Science Facilities, CAS, Beijing (China)

    2015-03-25

    We compute the $\\bar d - \\bar u$ asymmetry in the proton in chiral effective theory, including both nucleon and Δ degrees of freedom, within both relativistic and heavy baryon frameworks. In addition to the distribution at $x>0$, we estimate the correction to the integrated asymmetry arising from zero momentum contributions from pion rainbow and bubble diagrams at $x=0$, which have not been accounted for in previous analyses. In conclusion, we find that the empirical $x$ dependence of $\\bar d - \\bar u$ as well as the integrated asymmetry can be well reproduced in terms of a transverse momentum cutoff parameter.

  1. Principles of speech coding

    CERN Document Server

    Ogunfunmi, Tokunbo

    2010-01-01

    It is becoming increasingly apparent that all forms of communication-including voice-will be transmitted through packet-switched networks based on the Internet Protocol (IP). Therefore, the design of modern devices that rely on speech interfaces, such as cell phones and PDAs, requires a complete and up-to-date understanding of the basics of speech coding. Outlines key signal processing algorithms used to mitigate impairments to speech quality in VoIP networksOffering a detailed yet easily accessible introduction to the field, Principles of Speech Coding provides an in-depth examination of the

  2. Constraints from Dynamical Friction on the Dark Matter Content of Barred Galaxies

    CERN Document Server

    De Battista, V P; Debattista, Victor P.

    2000-01-01

    We show that bars in galaxy models having halos of moderate density and a variety of velocity distributions all experience a strong drag from dynamical friction unless the halo has large angular momentum in the same sense as the disk. The frictional drag decreases the bar pattern speed, driving the corotation point out to distances well in excess of those estimated in barred galaxies. The halo angular momentum required to avoid strong braking is unrealistically large, even when rotation is confined to the inner halo only. We conclude, therefore, that bars are able to maintain their observed high pattern speeds only if the halo has a central density low enough for the disk to provide most of the central attraction in the inner galaxy. We present evidence that this conclusion holds for all bright galaxies.

  3. Search for the B to K nu nu-bar Decay Using Semi-Leptonic Tags

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, B.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prencipe, E.; Prudent, X.; Tisserand, V.; /Annecy, LAPP; Garra Tico, J.; Grauges, E.; /Barcelona U., ECM; Martinelli, M.; Palano, A.; Pappagallo, M.; /INFN, Bari /Bari U.; Eigen, G.; Stugu, B.; Sun, L.; /Bergen U.; Battaglia, M.; Brown, D.N.; Hooberman, B.; Kerth, L.T.; Kolomensky, Yu.G.; Lynch, G. /UC, Berkeley /Birmingham U. /Ruhr U., Bochum /British Columbia U. /Brunel U. /Novosibirsk, IYF /UC, Irvine /UC, Riverside /UC, San Diego /UC, Santa Barbara /UC, Santa Cruz /Caltech /Cincinnati U. /Colorado U. /Colorado State U. /Dortmund U. /Dresden, Tech. U. /Ecole Polytechnique /Edinburgh U. /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /Frascati /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /Harvard U. /Heidelberg U. /Humboldt U., Berlin /Imperial Coll., London /Iowa State U. /Iowa State U. /Johns Hopkins U. /Orsay, LAL /LLNL, Livermore /Liverpool U. /Queen Mary, U. of London /Royal Holloway, U. of London /Louisville U. /Mainz U., Inst. Kernphys. /Manchester U. /Maryland U. /Massachusetts U., Amherst /MIT /McGill U. /INFN, Milan /Milan U. /INFN, Milan /INFN, Milan /Milan U. /Mississippi U. /Montreal U. /Mt. Holyoke Coll. /INFN, Naples /Naples U. /INFN, Naples /INFN, Naples /Naples U. /NIKHEF, Amsterdam /NIKHEF, Amsterdam /Notre Dame U. /Ohio State U. /Oregon U. /INFN, Padua /Padua U. /INFN, Padua /INFN, Padua /Padua U. /Paris U., VI-VII /Pennsylvania U. /INFN, Perugia /Perugia U. /INFN, Pisa /Pisa U. /INFN, Pisa /Pisa, Scuola Normale Superiore /INFN, Pisa /Pisa U. /INFN, Pisa /Princeton U. /INFN, Rome /Rome U. /INFN, Rome /Rome U. /Rome U. /INFN, Rome /Rome U. /INFN, Rome /Rome U. /Rome U. /INFN, Rome /Rome U. /INFN, Rome /Rome U. /Rome U. /INFN, Rome /Rome U. /INFN, Rome /Rome U. /Rome U. /INFN, Rome /Rome U. /Rostock U. /Rutherford /DAPNIA, Saclay /SLAC /South Carolina U. /Stanford U., Phys. Dept. /SUNY, Albany /Tel Aviv U. /Tennessee U. /Texas Nuclear Corp., Austin /Texas U., Dallas /INFN, Turin /Turin U. /INFN, Trieste /Trieste U. /Valencia U. /Victoria U. /Warwick U. /Wisconsin U., Madison

    2010-06-02

    We present an update of the search for the flavor-changing neutral current B{sup +} {yields} K{sup +}{nu}{bar {nu}} decay using 351 X 10{sup 6} B{bar B} pairs collected at the {Upsilon}(4S) resonance with the BABAR detector at the SLAC PEP-II B factory. Due to the presence of two neutrinos in the final state, we require the reconstruction of the companion B in the event through the decay channel B{sup -} {yields} D{sup 0}{ell}{sup -}{bar {nu}}X. We find 38 candidates in the data with an expected background of 31{-+} 12. This allows us to set an upper limit on the branching fraction for B{sup +} {yields} K{sup +}{nu}{bar {nu}} of 4.5 X 10{sup -5} at 90% confidence level.

  4. Using NAEYC's Code of Ethics.

    Science.gov (United States)

    Young Children, 1995

    1995-01-01

    Considers how to deal with an ethical dilemma concerning a caregiver's dislike for a child. Recognizes that no statement in NAEYC's Code of Ethical Conduct requires that a professional must like each child, and presents some ideals and principles from the code that may guide professionals through similar situations. (BAC)

  5. Perspectives of Open Charm Physics at $\\bar PANDA$

    CERN Document Server

    Prencipe, Elisabetta

    2014-01-01

    The $\\bar PANDA$ experiment at FAIR (Facility for Antiproton and Ion Research) in Darmstadt (Germany) is designed for $\\bar p p$ annihilation studies and it will investigate fundamental questions of hadron and nuclear physics in interactions of antiprotons with nucleons and nuclei. Gluonic excitations and the physics of hadrons with strange and charm quarks will be accessible with unprecedented accuracy, thereby allowing high precision tests of the strong interactions. In particular, the $D_{s0}^*(2317)^+$ and $D_{s1}(2460)^+$ are still of high interest 11 years after their discovery, because they can not be simply understood in term of potential models. The available statistics and resolution of the past experiments did not allow to clarify their nature. Recently LHCb at CERN has made progresses in this respect, but still not at the level of precision required in order to clarify the puzzle of the $cs$-spectrum. $\\bar PANDA$ will be able to achieve a factor 20 higher mass resolution than attained at the B-fa...

  6. The generation of recombinant influenza A viruses expressing a PB2 fusion protein requires the conservation of a packaging signal overlapping the coding and noncoding regions at the 5' end of the PB2 segment

    International Nuclear Information System (INIS)

    We generated recombinant A/WSN/33 influenza A viruses expressing a PB2 protein fused to a Flag epitope at the N- (Flag-PB2) or C-terminus (PB2-Flag), which replicated efficiently and proved to be stable upon serial passage in vitro on MDCK cells. Rescue of PB2-Flag viruses required that the 5' end of the PB2 segment was kept identical to the wild-type beyond the 34 noncoding terminal nucleotides. This feature was achieved by a duplication of the 109 last nucleotides encoding PB2 between the Flag sequence and the 5'NCR. In PB2 minigenomes rescue experiments, both the 5' and 3' coding ends of the PB2 segment were found to promote the incorporation of minigenomes into virions. However, the presence of the Flag sequence at the junction between the 3'NCR and the coding sequence did not prevent the rescue of Flag-PB2 viruses. Our observations define requirements that may be useful for the purpose of engineering influenza RNAs

  7. Cultural Factors Related to Smoking in San Francisco's Irish Bars

    Science.gov (United States)

    Satterlund, Travis D.; Antin, Tamar M. J.; Lee, Juliet P.; Moore, Roland S.

    2009-01-01

    California's Smoke-Free Workplace Act was extended to include bars in 1998. While the majority of bars in the state have become smoke free, in many bars patrons and staff continue to smoke despite the law. The authors present findings from a study which assessed cultural factors related to continued smoking in bars in the city of San Francisco. In…

  8. 21 CFR 886.1650 - Ophthalmic bar prism.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar prism. 886.1650 Section 886.1650...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1650 Ophthalmic bar prism. (a) Identification. An ophthalmic bar prism is a device that is a bar composed of fused prisms of gradually...

  9. Branching fractions for chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega

    CERN Document Server

    Onyisi, P U E; Alexander, J P; Cassel, D G; Das, S; Ehrlich, R; Fields, L; Gibbons, L; Gray, S W; Hartill, D L; Heltsley, B K; Hunt, J M; Kreinick, D L; Kuznetsov, V E; Ledoux, J; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Sun, W M; Yelton, J; Rubin, P; Lowrey, N; Mehrabyan, S; Selen, M; Wiss, J; Adams, S; Kornicer, M; Mitchell, R E; Shepherd, M R; Tarbert, C M; Besson, D; Pedlar, T K; Xavier, J; Cronin-Hennessy, D; Hietala, J; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Xiao, T; Tomaradze, A; Brisbane, S; Libby, J; Martin, L; Powell, A; Spradlin, P; Wilkinson, G; Mendez, H; Ge, J Y; Miller, D H; Shipsey, I P J; Xin, B; Adams, G S; Hu, D; Moziak, B; Napolitano, J; Ecklund, K M; Insler, J; Muramatsu, H; Park, C S; Thorndike, E H; Yang, F; Ricciardi, S; Thomas, C; Artuso, M; Blusk, S; Mountain, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M; Bonvicini, G; Cinabro, D; Lincoln, A; Smith, M J; Zhou, P; Zhu, J; Naik, P; Rademacker, J; Asner, D M; Edwards, K W; Reed, J; Randrianarivony, K; Robichaud, A N; Tatishvili, G; White, E J; Briere, R A; Vogel, H

    2010-01-01

    Using a sample of 25.9 million psi(2S) decays acquired with the CLEO-c detector at the CESR e^+e^- collider, we report branching fractions for the decays chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega, with J=0,1,2. Our results for B(chi_cJ-> p p-bar pi^0) and B(chi_cJ-> p p-bar eta) are consistent with, but more precise than, previous measurements. Furthermore, we include the first measurement of B(chi_cJ-> p p-bar omega).

  10. Code query by example

    Science.gov (United States)

    Vaucouleur, Sebastien

    2011-02-01

    We introduce code query by example for customisation of evolvable software products in general and of enterprise resource planning systems (ERPs) in particular. The concept is based on an initial empirical study on practices around ERP systems. We motivate our design choices based on those empirical results, and we show how the proposed solution helps with respect to the infamous upgrade problem: the conflict between the need for customisation and the need for upgrade of ERP systems. We further show how code query by example can be used as a form of lightweight static analysis, to detect automatically potential defects in large software products. Code query by example as a form of lightweight static analysis is particularly interesting in the context of ERP systems: it is often the case that programmers working in this field are not computer science specialists but more of domain experts. Hence, they require a simple language to express custom rules.

  11. Evidence for the existence of $u d \\bar{b} \\bar{b}$ and the non-existence of $s s \\bar{b} \\bar{b}$ and $c c \\bar{b} \\bar{b}$ tetraquarks from lattice QCD

    CERN Document Server

    Bicudo, Pedro; Peters, Antje; Wagenbach, Björn; Wagner, Marc

    2015-01-01

    We combine lattice QCD results for the potential of two static antiquarks in the presence of two quarks $q q$ of finite mass and quark model techniques to study possibly existing $q q \\bar{b} \\bar{b}$ tetraquarks. While there is strong indication for a bound four-quark state for $q q = (ud-du) / \\sqrt{2}$, i.e. isospin $I=0$, we find clear evidence against the existence of corresponding tetraquarks with $q q \\in \\{ uu , (ud+du) / \\sqrt{2} , dd \\}$, i.e. isospin $I=1$, $q q = s s$ and $q q = c c$.

  12. Nuclear Energy -- Knowledge Base for Advanced Modeling and Simulation (NE-KAMS) Code Verification and Validation Data Standards and Requirements: Fluid Dynamics Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Greg Weirs; Hyung Lee

    2011-09-01

    V&V and UQ are the primary means to assess the accuracy and reliability of M&S and, hence, to establish confidence in M&S. Though other industries are establishing standards and requirements for the performance of V&V and UQ, at present, the nuclear industry has not established such standards or requirements. However, the nuclear industry is beginning to recognize that such standards are needed and that the resources needed to support V&V and UQ will be very significant. In fact, no single organization has sufficient resources or expertise required to organize, conduct and maintain a comprehensive V&V and UQ program. What is needed is a systematic and standardized approach to establish and provide V&V and UQ resources at a national or even international level, with a consortium of partners from government, academia and industry. Specifically, what is needed is a structured and cost-effective knowledge base that collects, evaluates and stores verification and validation data, and shows how it can be used to perform V&V and UQ, leveraging collaboration and sharing of resources to support existing engineering and licensing procedures as well as science-based V&V and UQ processes. The Nuclear Energy Knowledge base for Advanced Modeling and Simulation (NE-KAMS) is being developed at the Idaho National Laboratory in conjunction with Bettis Laboratory, Sandia National Laboratories, Argonne National Laboratory, Utah State University and others with the objective of establishing a comprehensive and web-accessible knowledge base to provide V&V and UQ resources for M&S for nuclear reactor design, analysis and licensing. The knowledge base will serve as an important resource for technical exchange and collaboration that will enable credible and reliable computational models and simulations for application to nuclear power. NE-KAMS will serve as a valuable resource for the nuclear industry, academia, the national laboratories, the U.S. Nuclear Regulatory Commission (NRC) and

  13. NOVEL BIPHASE CODE -INTEGRATED SIDELOBE SUPPRESSION CODE

    Institute of Scientific and Technical Information of China (English)

    Wang Feixue; Ou Gang; Zhuang Zhaowen

    2004-01-01

    A kind of novel binary phase code named sidelobe suppression code is proposed in this paper. It is defined to be the code whose corresponding optimal sidelobe suppression filter outputs the minimum sidelobes. It is shown that there do exist sidelobe suppression codes better than the conventional optimal codes-Barker codes. For example, the sidelobe suppression code of length 11 with filter of length 39 has better sidelobe level up to 17dB than that of Barker code with the same code length and filter length.

  14. From concatenated codes to graph codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom

    2004-01-01

    We consider codes based on simple bipartite expander graphs. These codes may be seen as the first step leading from product type concatenated codes to more complex graph codes. We emphasize constructions of specific codes of realistic lengths, and study the details of decoding by message passing...... in trees....

  15. Concatenated codes with convolutional inner codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Thommesen, Christian; Zyablov, Viktor

    1988-01-01

    The minimum distance of concatenated codes with Reed-Solomon outer codes and convolutional inner codes is studied. For suitable combinations of parameters the minimum distance can be lower-bounded by the product of the minimum distances of the inner and outer codes. For a randomized ensemble of...... concatenated codes a lower bound of the Gilbert-Varshamov type is proved...

  16. 一种基于数据挖掘的量化新增需求代码量的分析方法%AN ANALYSING APPROACH FOR QUANTIFYING LINES OF CODE OF NEWLY ADDED REQUIREMENTS USING DATA MINING

    Institute of Scientific and Technical Information of China (English)

    高健; 李娟; 杨达; 李引

    2011-01-01

    The requirements evolve frequently during software development. And,it is an important factor leading to the failure of software projects. Accurate analysis of the impact of requirements evolution will effectively help decision makers to reduce the risks of software project failure. Among all the risks,how to quantify the effect of newly added requirements on software project is particularly a problem hard to be dealt with. This paper proposes a quantified analysis method for requirement evolution impact using data mining. It clusters the newly added requirements with existing requirements of the software project first, and then analyses the clustering results. This method can comparatively quantify the lines of code to be created by the new requirements.%需求演化频繁发生于软件项目中,并且在很大程度上影响着软件项目的成败.对需求演化的影响进行准确的估算,将有效地帮助项目管理者降低软件项目失败的风险.其中,如何量化新增需求对软件项目的影响,是一个尤其难以解决的问题.提出一种基于数据挖掘的需求演化影响的量化分析方法,将新增需求与软件项目已有需求进行聚类,对于聚类结果进行分析,能够相对准确地量化新增需求将要产生的代码量.

  17. Warp evidences in precessing galactic bar models

    CERN Document Server

    Sanchez-Martin, Patricia; Masdemont, Josep J

    2016-01-01

    Most galaxies have a warped shape when they are seen from an edge-on point of view. The reason for this curious form is not completely known so far and in this work we apply dynamical system tools to contribute to its explanation. Starting from a simple, but realistic, model formed by a bar and a disc, we study the effect produced by a small misalignment between the angular momentum of the system and its angular velocity. To this end, a precession model is developed and considered, assuming that the bar behaves like a rigid body. After checking that the periodic orbits inside the bar keep being the skeleton of the inner system, even after inflicting a precession to the potential, we compute the invariant manifolds of the unstable periodic orbits departing from the equilibrium points at the ends of the bar to get evidences of their warped shapes. As it is well known, the invariant manifolds associated with these periodic orbits drive the arms and rings of barred galaxies and constitute the skeleton of these bu...

  18. Tidally induced bars of galaxies in clusters

    CERN Document Server

    Lokas, Ewa L; del Pino, Andres; Sybilska, Agnieszka; Athanassoula, E; Semczuk, Marcin; Gajda, Grzegorz; Fouquet, Sylvain

    2016-01-01

    Using N-body simulations we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and an NFW dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger, longer and have lower pattern speeds for tighter orbits. Only for the tightest orbit the properties of the bar are controlled by the orientation of the tidal torque from the cluster at pericenters. The mechanism behind the formation of the bars is the angular momentum transfer from the galaxy stellar component to its halo. All bars undergo extended periods of buckling instability that occur earlier and lead to more pronounced boxy/peanut shapes when th...

  19. Warp evidence in precessing galactic bar models

    Science.gov (United States)

    Sánchez-Martín, P.; Romero-Gómez, M.; Masdemont, J. J.

    2016-04-01

    Most galaxies have a warped shape when they are seen edge-on. The reason for this curious form is not completely known so far, so in this work we apply dynamical system tools to contribute to its explanation. Starting from a simple, but realistic model formed by a bar and a disc, we study the effect of a small misalignment between the angular momentum of the system and its angular velocity. To this end, a precession model was developed and considered, assuming that the bar behaves like a rigid body. After checking that the periodic orbits inside the bar continue to be the skeleton of the inner system even after inflicting a precession to the potential, we computed the invariant manifolds of the unstable periodic orbits departing from the equilibrium points at the ends of the bar to find evidence of their warped shapes. As is well known, the invariant manifolds associated with these periodic orbits drive the arms and rings of barred galaxies and constitute the skeleton of these building blocks. Looking at them from a side-on viewpoint, we find that these manifolds present warped shapes like those recognised in observations. Lastly, test particle simulations have been performed to determine how the stars are affected by the applied precession, this way confirming the theoretical results.

  20. CP Asymmetries in bar B -> bar K* (-> bar K pi) l+ l- and Untagged bar B_s,B_s -> phi (-> K+ K-) l+ l- Decays at NLO

    CERN Document Server

    Bobeth, Christoph; Piranishvili, Giorgi

    2008-01-01

    The decay bar B -> bar K* (-> bar K pi) l+ l- offers great opportunities to explore the physics at and above the electroweak scale by means of an angular analysis. We investigate the physics potential of the seven CP asymmetries plus the asymmetry in the rate, working at low dilepton mass using QCD factorization at next-to leading order (NLO). The b ->s CP asymmetries are doubly Cabibbo-suppressed \\lesssim 1 % in the Standard Model and its extensions where the CKM matrix is the only source of CP violation. Three CP asymmetries are T-odd, and can be O(1) in the presence of non-standard CP violation. The T-even asymmetries can reach O(0.1), limited by the small strong phases in the large recoil region. We furthermore point out an easy way to measure CP phases from time-integrated, untagged bar B_d, B_d -> K* (-> K0 pi0) l+ l- and bar B_s,B_s -> phi (-> K+ K-) l+ l- decays. Analyses of these CP asymmetries can rule out, or further support the minimal description of CP violation through the CKM mechanism. Experim...

  1. Managing the BaBar object oriented database

    International Nuclear Information System (INIS)

    The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. The authors discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

  2. Quantum Cyclic Code

    CERN Document Server

    Dutta, Sagarmoy

    2010-01-01

    In this paper, we define and study \\emph{quantum cyclic codes}, a generalisation of cyclic codes to the quantum setting. Previously studied examples of quantum cyclic codes were all quantum codes obtained from classical cyclic codes via the CSS construction. However, the codes that we study are much more general. In particular, we construct cyclic stabiliser codes with parameters $[[5,1,3

  3. Application of photon Doppler velocimetry to direct impact Hopkinson pressure bars

    Energy Technology Data Exchange (ETDEWEB)

    Lea, Lewis J., E-mail: ll379@cam.ac.uk; Jardine, Andrew P. [SMF Fracture and Shock Physics Group, Cavendish Laboratory, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2016-02-15

    Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion, and faster achievement of force equilibrium. Currently, these advantages are gained at the expense of all information about the striker impacted specimen face, preventing the experimental determination of force equilibrium, and requiring approximations to be made on the sample deformation history. In this paper, we discuss an experimental method and complementary data analysis for using photon Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system. We discuss extracting velocity and force measurements, and the precision of measurements. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains in fully dense metals, and improvement for all strains in slow and non-equilibrating materials.

  4. Sensorial analysis evaluation in cereal bars preserved by ionizing radiation processing

    Science.gov (United States)

    Villavicencio, A. L. C. H.; Araújo, M. M.; Fanaro, G. B.; Rela, P. R.; Mancini-Filho, J.

    2007-11-01

    Gamma-rays utilized as a food-processing treatment to eliminate insect contamination is well established in food industries. Recent troubles in Brazilian cereal bars commercialization require a special consumer's attention because some products were contaminated by insects. To solve the problem, food-irradiation treatment was utilized as a safe and effective solution. The final product was free of insect contamination. The aim of this study was to determine the best radiation dose processing utilized to disinfestations and detect some change on sensorial characteristic by sensorial analysis in cereal bars. In this study, three different kinds of cereal bars were purchased in São Paulo (Brazil) in supermarkets and irradiated with 1.0, 2.0 and 3.0 kGy at "Instituto de Pesquisas Energéticas e Nucleares" (IPEN-CNEN/SP). The samples were treated with ionizing radiation using a 60Co gamma-ray facility (Gammacell 220, A.E.C.L.). That radiation doses were used successfully as an anti-insect treatment in the cereal bars, since in some food industries doses up to 3.0 kGy are used to guarantee at least a dose of 1.0 kGy in internal cereal bars package. Sensorial analysis was necessary since cereal bars contain ingredients very sensitive to ionizing radiation process.

  5. Sensorial analysis evaluation in cereal bars preserved by ionizing radiation processing

    International Nuclear Information System (INIS)

    Gamma-rays utilized as a food-processing treatment to eliminate insect contamination is well established in food industries. Recent troubles in Brazilian cereal bars commercialization require a special consumer's attention because some products were contaminated by insects. To solve the problem, food-irradiation treatment was utilized as a safe and effective solution. The final product was free of insect contamination. The aim of this study was to determine the best radiation dose processing utilized to disinfestations and detect some change on sensorial characteristic by sensorial analysis in cereal bars. In this study, three different kinds of cereal bars were purchased in Sao Paulo (Brazil) in supermarkets and irradiated with 1.0, 2.0 and 3.0 kGy at 'Instituto de Pesquisas Energeticas e Nucleares' (IPEN-CNEN/SP). The samples were treated with ionizing radiation using a 60Co gamma-ray facility (Gammacell 220, A.E.C.L.). That radiation doses were used successfully as an anti-insect treatment in the cereal bars, since in some food industries doses up to 3.0 kGy are used to guarantee at least a dose of 1.0 kGy in internal cereal bars package. Sensorial analysis was necessary since cereal bars contain ingredients very sensitive to ionizing radiation process

  6. Application of photon Doppler velocimetry to direct impact Hopkinson pressure bars.

    Science.gov (United States)

    Lea, Lewis J; Jardine, Andrew P

    2016-02-01

    Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion, and faster achievement of force equilibrium. Currently, these advantages are gained at the expense of all information about the striker impacted specimen face, preventing the experimental determination of force equilibrium, and requiring approximations to be made on the sample deformation history. In this paper, we discuss an experimental method and complementary data analysis for using photon Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system. We discuss extracting velocity and force measurements, and the precision of measurements. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains in fully dense metals, and improvement for all strains in slow and non-equilibrating materials.

  7. Sensorial analysis evaluation in cereal bars preserved by ionizing radiation processing

    Energy Technology Data Exchange (ETDEWEB)

    Villavicencio, A.L.C.H. [Instituto de Pesquisas Energeticas e Nucleares-IPEN-CNEN/SP, Centro de Tecnologia das Radiacoes, Lab. de Deteccao de Alimentos Irradiados, Travessa R. No. 400, Cidade Universitaria, CEP 05508-910, Sao Paulo (Brazil)], E-mail: villavic@ipen.br; Araujo, M.M.; Fanaro, G.B.; Rela, P.R. [Instituto de Pesquisas Energeticas e Nucleares-IPEN-CNEN/SP, Centro de Tecnologia das Radiacoes, Lab. de Deteccao de Alimentos Irradiados, Travessa R. No. 400, Cidade Universitaria, CEP 05508-910, Sao Paulo (Brazil); Mancini-Filho, J. [Faculdade de Ciencias Farmaceuticas-FCF/USP, Departamento de Alimentos e Nutricao Experimental, Lab. de Lipides, Sao Paulo (Brazil)], E-mail: jmancini@usp.br

    2007-11-15

    Gamma-rays utilized as a food-processing treatment to eliminate insect contamination is well established in food industries. Recent troubles in Brazilian cereal bars commercialization require a special consumer's attention because some products were contaminated by insects. To solve the problem, food-irradiation treatment was utilized as a safe and effective solution. The final product was free of insect contamination. The aim of this study was to determine the best radiation dose processing utilized to disinfestations and detect some change on sensorial characteristic by sensorial analysis in cereal bars. In this study, three different kinds of cereal bars were purchased in Sao Paulo (Brazil) in supermarkets and irradiated with 1.0, 2.0 and 3.0 kGy at 'Instituto de Pesquisas Energeticas e Nucleares' (IPEN-CNEN/SP). The samples were treated with ionizing radiation using a {sup 60}Co gamma-ray facility (Gammacell 220, A.E.C.L.). That radiation doses were used successfully as an anti-insect treatment in the cereal bars, since in some food industries doses up to 3.0 kGy are used to guarantee at least a dose of 1.0 kGy in internal cereal bars package. Sensorial analysis was necessary since cereal bars contain ingredients very sensitive to ionizing radiation process.

  8. 中国与印度“大火规”水处理系统的设计要求对比%Comparison Chinese with India Design Requirement of Water Treatment System in Power Plant Code

    Institute of Scientific and Technical Information of China (English)

    徐淑姣

    2015-01-01

    国内电力设计行业涉足印度发电工程日益增多。本文对比了中印电力标准中水处理系统的设计要求,对两国工程设计标准的异同进行了总结,为国内后续开展的印度发电工程水处理系统设计提供参考和借鉴。%More and more Indian power plant projects are designed by Chinese electric power design institute. This paper coMPared the design requirement of water treatment system in power plant code between China and India, and it summarized the differences and similarities in design code of the two countries. It is hoped that the coMParison will provide reference for Chinese to design water treatment system of Indian power plant in the future.

  9. DATA SECURITY THROUGH QR CODE ENCRYPTION AND STEGANOGRAPHY

    OpenAIRE

    M. Mary Shanthi Rani; K.Rosemary Euphrasia

    2016-01-01

    The art of information hiding has become an important issue in the recent years as security of information has become a big concern in this internet era. Cryptography and Steganography play major role for secured data transfer. Steganography stands for concealed writing; it hides the message inside a cover medium. Cryptography conceals the content of a message by encryption. QR (Quick Response) Codes are 2-dimensional bar codes that encode text strings. They are able to encode inf...

  10. Jazz Chants Born in a Piano Bar

    Directory of Open Access Journals (Sweden)

    Caroline Graham

    2010-01-01

    Full Text Available When I first arrived in New York in the late sixties, I began teaching ESL at New York University. I didn`t really think of teaching as a profession for me. I just thought it would pay the rent so I could do what I really wanted to do which was to sing and play ragtime piano in the piano bars. When I got my first piano job in an Irish Bar it was uptown, far away from NYU so I didn`t feel it was necessary to mention this night job to my boss.

  11. Newtorites in bar detectors of gravitational wave

    CERN Document Server

    Ronga, F

    2015-01-01

    The detection of particles with only gravitational interactions (Newtorites) in gravitational bar detectors was studied in 1984 by Bernard, De Rujula and Lautrup. The negative results of dark matter searches suggest to look to exotic possibilities like Newtorites. The limits obtained with the Nautilus bar detector will be presented and the possible improvements will be discussed. Since the gravitational coupling is very weak, the possible limits are very far from what is needed for dark matter, but for large masses are the best limits obtained on the Earth. An update of limits for MACRO particles will be given.

  12. Track Finding Efficiency in BaBar

    CERN Document Server

    Allmendinger, T; Brown, D N; Choi, H; Christ, S; Covarelli, R; Davier, M; Denig, A G; Fritsch, M; Hafner, A; Kowalewski, R; Long, O; Lutz, A M; Martinelli, M; Muller, D R; Nugent, I M; Pegna, D Lopes; Purohit, M V; Prencipe, E; Roney, J M; Simi, G; Solodov, E P; Telnov, A V; Varnes, E; Waldi, R; Wang, W F; White, R M

    2012-01-01

    We describe several studies to measure the charged track reconstruction efficiency and asymmetry of the BaBar detector. The first two studies measure the tracking efficiency of a charged particle using $\\tau$ and initial state radiation decays. The third uses the $\\tau$ decays to study the asymmetry in tracking, the fourth measures the tracking efficiency for low momentum tracks, and the last measures the reconstruction efficiency of $K_S^0$ particles. The first section also examines the stability of the measurements vs BaBar running periods.

  13. The Disability Dilemma: A Skeptical Bench & Bar

    OpenAIRE

    Wendy F. Hensel

    2008-01-01

    The legal profession is no stranger to the bias and prejudice present in American society. Members of the bar have been shown to engage in both conscious and subconscious sexism and racism, posing challenges to the profession as the profile of those practicing law has changed over the last several decades to admit increasing numbers of women and minorities.1 Nevertheless, it is notable that few, if any, members of the bar today would question openly whether women or people of color have the a...

  14. B Counting at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    McGregor, Grant Duncan

    2008-12-16

    In this thesis we examine the method of counting B{bar B} events produced in the BABAR experiment. The original method was proposed in 2000, but improvements to track reconstruction and our understanding of the detector since that date make it appropriate to revisit the B Counting method. We propose a new set of cuts designed to minimize the sensitivity to time-varying backgrounds. We find the new method counts B{bar B} events with an associated systematic uncertainty of {+-} 0.6%.

  15. Imaging of physeal bars in children

    Energy Technology Data Exchange (ETDEWEB)

    Wang, David C. [Massachusetts General Hospital and Harvard Medical School, Department of Radiology, Boston, MA (United States); Deeney, Vincent; Roach, James W. [Children' s Hospital of Pittsburgh of UPMC, Department of Orthopedics, Pittsburgh, PA (United States); Shah, Amisha J. [Children' s Hospital of Pittsburgh of UPMC, Department of Radiology, Pittsburgh, PA (United States)

    2015-08-15

    The growth plate, also known as the physis or epiphyseal plate, is essential for longitudinal growth of bones in the immature skeleton. A variety of insults to the growth plate from trauma to infection to idiopathic causes can lead to physeal bar formation, an interruption in normal growth plate cartilage, where a bony or fibrous bridge develops between the metaphysis and epiphysis. This bridge restricts subsequent bone growth, leading to limb shortening and/or angular deformities. Early recognition of the presence of a physeal bar can help direct appropriate surgical management to restore linear growth of the bone. (orig.)

  16. M33: THE EXISTENCE OF A BAR

    Directory of Open Access Journals (Sweden)

    I. Hernández-López

    2009-01-01

    Full Text Available A signi cant fraction of galaxies in the Local Universe classi ed as unbarred in the RC3 turn out to be barred in optical and NIR wavelengths. In the Local Group the Milky Way and M31 have shown to be barred as well, this also could be the case of M33. In this paper we present the results of the Ellipse tting and bidimensional Fourier Analysis, on the R and I bands, deprojected and non-deprojected, images of M33 obtained from DSS2 and Spitzer-IRAC.

  17. On the near-threshold $\\bar pp$ invariant mass spectrum measured in $J/\\psi$ and $\\psi'$ decays

    CERN Document Server

    Kang, Xian-Wei; Meißner, Ulf-G

    2015-01-01

    A systematic analysis of the near-threshold enhancement in the $\\bar pp$ invariant mass spectrum seen in the decay reactions $J/\\psi \\to x \\bar pp$ and $\\psi (3686) \\to x \\bar pp$ $(x = \\gamma,\\, \\omega,\\, \\rho,\\, \\pi,\\, \\eta)$ is presented. The enhancement is assumed to be due to the $\\bar NN$ final-state interaction (FSI) and the pertinent FSI effects are evaluated in an approach that is based on the distorted-wave Born approximation. For the $\\bar NN$ interaction a recent potential derived within chiral effective field theory and fitted to results of a partial-wave analysis of $\\bar pp$ scattering data is considered and, in addition, an older phenomenological model constructed by the J\\"ulich group. It is shown that the near-threshold spectrum observed in various decay reactions can be reproduced simultaneously and consistently by our treatment of the $\\bar pp$ FSI. It turns out that the interaction in the isospin-1 $^1S_0$ channel required for the description of the $J/\\psi \\to \\gamma \\bar pp$ decay predi...

  18. Textural performance of crosslinked or reduced-calcium milk protein ingredients in model high-protein nutrition bars.

    Science.gov (United States)

    Banach, J C; Clark, S; Metzger, L E; Lamsal, B P

    2016-08-01

    Transglutaminase (Tgase) crosslinking and calcium reduction were investigated as ways to improve the texture and storage stability of high-protein nutrition (HPN) bars formulated with milk protein concentrate (MPC) and micellar casein concentrate (MCC). The MPC and MCC crosslinked at none, low, and high levels, and a reduced-calcium MPC (RCMPC) were each formulated into model HPN bars. Hardness, crumbliness, moisture content, pH, color, and water activity of the HPN bars were measured during accelerated storage. The HPN bars prepared with MPC were harder and more cohesive than those prepared with MCC. Higher levels of Tgase crosslinking improved HPN bar cohesiveness and decreased hardening during storage. The RCMPC produced softer, yet crumblier HPN bars. Small textural differences were observed for the HPN bars formulated with the transglutaminase crosslinked proteins or RCMPC when compared with their respective controls. However, modification only slightly improved protein ingredient ability to slow hardening while balancing cohesion and likely requires further improvement for increased applicability in soft-texture HPN bars.

  19. Practices in Code Discoverability: Astrophysics Source Code Library

    CERN Document Server

    Allen, Alice; Nemiroff, Robert J; Shamir, Lior

    2012-01-01

    Here we describe the Astrophysics Source Code Library (ASCL), which takes an active approach to sharing astrophysical source code. ASCL's editor seeks out both new and old peer-reviewed papers that describe methods or experiments that involve the development or use of source code, and adds entries for the found codes to the library. This approach ensures that source codes are added without requiring authors to actively submit them, resulting in a comprehensive listing that covers a significant number of the astrophysics source codes used in peer-reviewed studies. The ASCL now has over 340 codes in it and continues to grow. In 2011, the ASCL (http://ascl.net) has on average added 19 new codes per month. An advisory committee has been established to provide input and guide the development and expansion of the new site, and a marketing plan has been developed and is being executed. All ASCL source codes have been used to generate results published in or submitted to a refereed journal and are freely available ei...

  20. Forming Double-barred Galaxies From Dynamically Cool Inner Disks

    CERN Document Server

    Du, Min; Debattista, Victor P

    2015-01-01

    About one third of early-type barred galaxies host small-scale secondary bars. The formation and evolution of such double-barred galaxies remain far from being well understood. In order to understand the formation of such systems, we explore a large parameter space of isolated pure-disk simulations. We show that a dynamically cool inner disk embedded in a hotter outer disk can naturally generate a steady secondary bar while the outer disk forms a large-scale primary bar. The independent bar instabilities of inner and outer disks result in long-lived double-barred structures whose dynamical properties are comparable with observations. This formation scenario indicates that the secondary bar might form from the general bar instability, the same as the primary bar. Under some circumstances, the interaction of the bars and the disk leads to the two bars aligning or single, nuclear, bars only. Simulations that are cool enough of the center to experience clump instabilities may also generate steady double-barred ga...

  1. Observation of B+ --> K0bar K+ and B0 --> K0 K0bar

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Gill, M S; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Del, P; Amo Sanchez; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Watson, A T; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Asgeirsson, D J; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Sherwood, D J; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, K Yu; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Hadavand, H K; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dvoretskii, A; Fang, F; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Mancinelli, G; Meadows, B T; Mishra, K; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nagel, M; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Merkel, J; Petzold, A; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Latour, E; Thiebaux, C; Verderi, M; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Contri, R; Lo, M; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bard, D J; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Behera, P K; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Denig, A G; Fritsch, M; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Wren, A C; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Cowan, R; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Mclachlin, S E; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M A; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Corwin, L A; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Rahimi, A M; Regensburger, J J; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Kolb, J A; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; Del, L; Buono; La Vaissière, C de; Hamon, O; Hartfiel, B L; Leruste, P; Malcles, J; Ocariz, J; Roos, L; Therin, G; Gladney, L; Biasini, M; Covarelli, R; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Aleksan, R; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Vasseur, G; Yéche, C; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Grenier, P; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Leith, D W G S; Li, S; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schilling, C J; Schwitters, R F; Izen, J M; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Lanceri, L; Vitale, L; Azzolini, V; Lopez-March, N; Martínez-Vidal, F; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Flood, K T; Hollar, J J; Kutter, P E; Mellado, B; Mihályi, A; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We report observations of the b --> d penguin-dominated decays B+ --> K0bar K+ and B0 --> K0 K0bar in approximately 350 million Upsilon(4S) --> BBbar decays collected with the BaBar detector. We measure the branching fractions B(B+ --> K0bar K+) = (1.61 +/- 0.44 +/- 0.09) * 10^-6 and B(B0 --> K0 K0bar) = (1.08 +/- 0.28 +/- 0.11) * 10^-6, and the CP-violating charge asymmetry A_{CP}(K0bar K+) = 0.10 +/- 0.26 +/- 0.03. Using a vertexing technique previously employed in several analyses of all-neutral final states containing kaons, we report the first measurement of time-dependent CP-violating asymmetries in B0 --> K0 K0bar, obtaining S = -1.28 +0.80/-0.73 +0.11/-0.16 and C = -0.40 +/- 0.41 +/- 0.06. We also report improved measurements of the branching fraction B(B0 --> K0 pi+) = (23.9 +/- 1.1 +/- 1.0) * 10^-6 and CP-violating charge asymmetry A_{CP}(K0 pi+) = -0.029 +/- 0.039 +/- 0.010.

  2. Parametric Study of Shear Strength of Concrete Beams Reinforced with FRP Bars

    Science.gov (United States)

    Thomas, Job; Ramadass, S.

    2016-06-01

    Fibre Reinforced Polymer (FRP) bars are being widely used as internal reinforcement in structural elements in the last decade. The corrosion resistance of FRP bars qualifies its use in severe and marine exposure conditions in structures. A total of eight concrete beams longitudinally reinforced with FRP bars were cast and tested over shear span to depth ratio of 0.5 and 1.75. The shear strength test data of 188 beams published in various literatures were also used. The model originally proposed by Indian Standard Code of practice for the prediction of shear strength of concrete beams reinforced with steel bars IS:456 (Plain and reinforced concrete, code of practice, fourth revision. Bureau of Indian Standards, New Delhi, 2000) is considered and a modification to account for the influence of the FRP bars is proposed based on regression analysis. Out of the 196 test data, 110 test data is used for the regression analysis and 86 test data is used for the validation of the model. In addition, the shear strength of 86 test data accounted for the validation is assessed using eleven models proposed by various researchers. The proposed model accounts for compressive strength of concrete (f ck ), modulus of elasticity of FRP rebar (E f ), longitudinal reinforcement ratio (ρ f ), shear span to depth ratio (a/d) and size effect of beams. The predicted shear strength of beams using the proposed model and 11 models proposed by other researchers is compared with the corresponding experimental results. The mean of predicted shear strength to the experimental shear strength for the 86 beams accounted for the validation of the proposed model is found to be 0.93. The result of the statistical analysis indicates that the prediction based on the proposed model corroborates with the corresponding experimental data.

  3. 45 CFR 162.1011 - Valid code sets.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Valid code sets. 162.1011 Section 162.1011 Public... ADMINISTRATIVE REQUIREMENTS Code Sets § 162.1011 Valid code sets. Each code set is valid within the dates specified by the organization responsible for maintaining that code set....

  4. Possible strange hidden-charm pentaquarks from $\\Sigma_c^{(*)}\\bar{D}_s^*$ and $\\Xi^{(',*)}_c\\bar{D}^*$ interactions

    CERN Document Server

    Chen, Rui; Liu, Xiang

    2016-01-01

    In a one-boson-exchange model with one-pion and one-eta exchanges, we investigate possible strange hidden-charm pentaquarks produced from the $\\Lambda_c\\bar{D}_s^*$, $\\Sigma_c\\bar{D}_s^*$, $\\Sigma_c^*\\bar{D}_s^*$, $\\Xi_c\\bar{D}^*$, $\\Xi_c'\\bar{D}^*$, and $\\Xi_c^*\\bar{D}^*$ interactions with the S-D wave mixing. The Lagrangians with chiral symmetry, heavy quark symmetry, and/or hidden local symmetry are adopted to describe the interactions. With such Lagrangians, it is found that the $\\Lambda_c\\bar{D}_s^*$ and $\\Xi_c\\bar{D}^*$ interactions are forbidden. For the $\\Sigma_c\\bar{D}_s^*$ and $\\Sigma_c^*\\bar{D}_s^*$ systems where the one-pion exchange is forbidden and only one-eta exchange survives, there exist three molecular candidates at cutoffs about 3 GeV, i.e., a $\\Sigma_c\\bar{D}_s^*$ state with quantum number $I(J^P)=1(\\frac{3}{2}^-)$ and $\\Sigma_c^*\\bar{D}_s^*$ states with $1(\\frac{1}{2}^-)$ and $1(\\frac{3}{2}^-)$. For the $\\Xi_c'\\bar{D}^*$ and $\\Xi_c^*\\bar{D}^*$ systems where the one-pion exchange is allow...

  5. A piezo-bar pressure probe

    Science.gov (United States)

    Friend, W. H.; Murphy, C. L.; Shanfield, I.

    1967-01-01

    Piezo-bar pressure type probe measures the impact velocity or pressure of a moving debris cloud. It measures pressures up to 200,000 psi and peak pressures may be recorded with a total pulse duration between 5 and 65 musec.

  6. Bar instability in disk-halo systems

    CERN Document Server

    Sellwood, J A

    2016-01-01

    We show that the exponential growth rate of a bar in a stellar disk is substantially greater when the disk is embedded in a live halo than in a rigid one having the same mass distribution. We also find that the vigor of the instability in disk-halo systems varies with the shape of the halo velocity ellipsoid. Disks in rigid halos that are massive enough to be stable by the usual criteria, quickly form bars in isotropic halos and much greater halo mass is needed to avoid a strong bar; thus stability criteria derived for disks in rigid halos do not apply when the halo is responsive. The study presented here is of an idealized family of models with near uniform central rotation and that lack an extended halo; we present more realistic models with extended halos in a companion paper. The puzzle presented by the absence of strong bars in some galaxies having gently rising inner rotation curves is compounded by the results presented here.

  7. Blast Quantification Using Hopkinson Pressure Bars.

    Science.gov (United States)

    Clarke, Samuel D; Fay, Stephen D; Rigby, Samuel E; Tyas, Andrew; Warren, James A; Reay, Jonathan J; Fuller, Benjamin J; Gant, Matthew T A; Elgy, Ian D

    2016-01-01

    Near-field blast load measurement presents an issue to many sensor types as they must endure very aggressive environments and be able to measure pressures up to many hundreds of megapascals. In this respect the simplicity of the Hopkinson pressure bar has a major advantage in that while the measurement end of the Hopkinson bar can endure and be exposed to harsh conditions, the strain gauge mounted to the bar can be affixed some distance away. This allows protective housings to be utilized which protect the strain gauge but do not interfere with the measurement acquisition. The use of an array of pressure bars allows the pressure-time histories at discrete known points to be measured. This article also describes the interpolation routine used to derive pressure-time histories at un-instrumented locations on the plane of interest. Currently the technique has been used to measure loading from high explosives in free air and buried shallowly in various soils. PMID:27404117

  8. My Bar Graph Tells a Story

    Science.gov (United States)

    McMillen, Sue; McMillen, Beth

    2010-01-01

    Connecting stories to qualitative coordinate graphs has been suggested as an effective instructional strategy. Even students who are able to "create" bar graphs may struggle to correctly "interpret" them. Giving children opportunities to work with qualitative graphs can help them develop the skills to interpret, describe, and compare information…

  9. BaBar Explores CP Violation

    International Nuclear Information System (INIS)

    The most recent results obtained by the BABAR experiment at the PEP-II asymmetric-energy B Factory at SLAC on CP-violating asymmetries and branching fractions for neutral and charged B decays are presented here. The analysis was performed on a data sample of ∼ 88 million Υ(4S) → B(bar B) decays collected between 1999 and 2002. Using b → c(bar c)s decays, we measure sin2β = 0.741 ± 0.067(stat) ± 0.034(syst). We also present sin2β measurements from, b → s(bar s)s and b → c(bar c)d processes. From neutral B meson decays to two-body final states of charged pions and kaons, we derive for the CP violating parameters, Sππ = 0.02 ± 0.34 ± 0.05 [-0.54, +0.58] and Cππ = -0.30 ± 0.25 ± 0.04 [-0.72, +0.12]. First results for B → π+π-π0 and K±π±π0 final states dominated by the ρ± resonance, are also presented

  10. Star formation properties in barred galaxies. III. Statistical study of bar-driven secular evolution using a sample of nearby barred spirals

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhi-Min; Wu, Hong [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Cao, Chen, E-mail: zmzhou@bao.ac.cn, E-mail: hwu@bao.ac.cn, E-mail: caochen@sdu.edu.cn [School of Space Science and Physics, Shandong University at Weihai, Weihai, Shandong 264209 (China)

    2015-01-01

    Stellar bars are important internal drivers of secular evolution in disk galaxies. Using a sample of nearby spiral galaxies with weak and strong bars, we explore the relationships between the star formation feature and stellar bars in galaxies. We find that galaxies with weak bars tend coincide with low concentrical star formation activity, while those with strong bars show a large scatter in the distribution of star formation activity. We find enhanced star formation activity in bulges toward stronger bars, although not predominantly, consistent with previous studies. Our results suggest that different stages of the secular process and many other factors may contribute to the complexity of the secular evolution. In addition, barred galaxies with intense star formation in bars tend to have active star formation in their bulges and disks, and bulges have higher star formation densities than bars and disks, indicating the evolutionary effects of bars. We then derived a possible criterion to quantify the different stages of the bar-driven physical process, while future work is needed because of the uncertainties.

  11. Characterizing Video Coding Computing in Conference Systems

    NARCIS (Netherlands)

    Tuquerres, G.

    2000-01-01

    In this paper, a number of coding operations is provided for computing continuous data streams, in particular, video streams. A coding capability of the operations is expressed by a pyramidal structure in which coding processes and requirements of a distributed information system are represented. Th

  12. Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

    CERN Document Server

    Aubert, B; Bóna, M; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Gill, M S; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Del Amo-Sánchez, P; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Sherwood, D J; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Y I; Solodov, E P; Todyshev, K Y; Best, D S; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Petzold, A; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Grenier, P; Latour, E; Thiebaux, C; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Fritsch, M; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Wren, A C; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Willocq, S Y; Cowan, R; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côte, D; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Lu, M; Potter, C T; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Chauveau, J; David, P; Del Buono, L; La Vaissière, C de; Hamon, O; Hartfiel, B L; John, M J J; Malcles, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Panetta, J; Biasini, M; Covarelli, R; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Vasseur, G; Yéche, C; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Boyarski, A M; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Leith, D W G S; Li, S; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schilling, C J; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Martínez-Vidal, F; Azzolini, V; Banerjee, S; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Flood, K T; Hollar, J J; Kutter, P E; Mellado, B; Mihályi, A; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We present a search for the decay of a B0 or B0bar meson to a K*0bar K0 or K*0 K0bar final state, using a sample of approximately 232 million BBbar events collected with the BABAR detector at the PEP-II asymmetric energy e+e- collider at SLAC. The measured branching fraction is B(B0 --> K*0bar K0) + B(B0 --> K*0 K0bar) = (0.2+0.9-0.8+0.1-0.3)x 10-6. We obtain the following upper limit for the branching fraction at 90% confidence level: B(B0 --> K*0bar K0) + B(B0 --> K*0 K0bar) phi K0 from sin(2beta).

  13. The Morphology of Collisionless Galactic Rings Exterior to Evolving Bars

    CERN Document Server

    Bagley, Micaela; Quillen, Alice C

    2008-01-01

    The morphology of the outer rings of early-type spiral galaxies is compared to integrations of massless collisionless particles initially in nearly circular orbits. Particles are perturbed by a quadrupolar gravitational potential corresponding to a growing and secularly evolving bar. We find that outer rings with R1R2 morphology and pseudorings are exhibited by the simulations even though they lack gaseous dissipation. Simulations with stronger bars form pseudorings earlier and more quickly than those with weaker bars. We find that the R1 ring, perpendicular to the bar, is fragile and dissolves after a few bar rotation periods if the bar pattern speed increases by more than ~ 8%, bar strength increases (by >~ 140%) after bar growth, or the bar is too strong (Q_T>0.3). If the bar slows down after formation, pseudoring morphology persists and the R2 ring perpendicular to the bar is populated due to resonance capture. The R2 ring remains misaligned with the bar and increases in ellipticity as the bar slows down....

  14. Study of psi(2S) Decays to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} and Search for p bar{p} Threshold Enhancements

    CERN Document Server

    Alexander, J P; Das, S; Ehrlich, R; Fields, L; Gibbons, L; Gray, S W; Hartill, D L; Heltsley, B K; Kreinick, D L; Kuznetsov, V E; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Sun, W M; Yelton, J; Rubin, P; Lowrey, N; Mehrabyan, S; Selen, M; Wiss, J; Adams, S; Kornicer, M; Mitchell, R E; Shepherd, M R; Tarbert, C M; Besson, D; Pedlar, T K; Xavier, J; Cronin-Hennessy, D; Hietala, J; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Tomaradze, A; Xiao, T; Brisbane, S; Libby, J; Martin, L; Powell, A; Spradlin, P; Wilkinson, G; Mendez, H; Ge, J Y; Miller, D H; Shipsey, I P J; Xin, B; Adams, G S; Hu, D; Moziak, B; Napolitano, J; Ecklund, K M; Insler, J; Muramatsu, H; Park, C S; Pearson, L J; Thorndike, E H; Yang, F; Ricciardi, S; Thomas, C; Artuso, M; Blusk, S; Mountain, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M; Bonvicini, G; Cinabro, D; Lincoln, A; Smith, M J; Zhou, P; Zhu, J; Naik, P; Rademacker, J; Asner, D M; Edwards, K W; Randrianarivony, K; Tatishvili, G; Briere, R A; Vogel, H; Onyisi, P U E; Rosner, J L

    2010-01-01

    The decays of psi(2S) into gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been studied with the CLEO-c detector using a sample of 24.5 million psi(2S) events obtained from e^+e^- annihilations at sqrt{s} = 3686 MeV. The data show evidence for the excitation of several N^* resonances in p pi^0 and p eta channels in pi^0 p bar{p} and eta p bar{p} decays, and f_2 states in gamma p bar{p} decay. Branching fractions for decays of psi(2S) to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been determined. No evidence for p bar{p} threshold enhancements was found in the reactions psi(2S)-> X p bar{p}, where X = gamma, pi^0, eta. We do, however, find confirming evidence for a p bar{p} threshold enhancement in J/psi-> gamma p bar{p} as previously reported by BES.

  15. Fundamentals of convolutional coding

    CERN Document Server

    Johannesson, Rolf

    2015-01-01

    Fundamentals of Convolutional Coding, Second Edition, regarded as a bible of convolutional coding brings you a clear and comprehensive discussion of the basic principles of this field * Two new chapters on low-density parity-check (LDPC) convolutional codes and iterative coding * Viterbi, BCJR, BEAST, list, and sequential decoding of convolutional codes * Distance properties of convolutional codes * Includes a downloadable solutions manual

  16. CP asymmetry Relations Between $\\bar B^0\\rightarrow \\pi\\pi$ and $\\bar B^0\\rightarrow \\pi K$ Rates

    OpenAIRE

    Deshpande, N. G.; He, Xiao-Gang(INPAC, SKLPPC and Department of Physics, Shanghai Jiao Tong University, Shanghai, China)

    1994-01-01

    We prove that CP violating rate difference $\\Delta (\\bar B^0 \\rightarrow \\pi^+\\pi^-) = \\Gamma (\\bar B^0 \\rightarrow \\pi^+\\pi^-) - \\Gamma ( B^0 \\rightarrow \\pi^-\\pi^+)$ is related to $\\Delta (\\bar B^0 \\rightarrow \\pi^+ K^-) = \\Gamma (\\bar B^0 \\rightarrow \\pi^+K^-) - \\Gamma (B^0 \\rightarrow \\pi^-K^+)$ in the three generation Standard Model. Neglecting small annihilation diagrams, and in the SU(3) symmetry limit, we show $\\Delta (\\bar B^0 \\rightarrow \\pi^+\\pi^-) = - \\Delta (\\bar B^0 \\rightarrow ...

  17. Nucleon strange $s\\bar s$ asymmetry to the $\\Lambda/\\bar\\Lambda$ fragmentation

    CERN Document Server

    Chi, Yujie; Ma, Bo-Qiang

    2014-01-01

    The difference between the $\\Lambda$ and $\\bar \\Lambda$ longitudinal spin transfers in the semi-inclusive deep inelastic scattering process is intensively studied. The study is performed in the current fragmentation region, by considering the intermediate hyperon decay processes and sea quark fragmentation processes, while the strange sea $s\\bar s$ asymmetry in the nucleon is taken into account. The calculation in the light-cone quark-diquark model shows that the strange sea asymmetry gives a proper trend to the difference between the $\\Lambda$ and $\\bar \\Lambda$ longitudinal spin transfers. When considering the nonzero final hadron transverse momentum, our results can explain the COMPASS data reasonably. The nonzero final hadron transverse momentum is interpreted as a natural constraint to the final hadron $z$ range where the longitudinal spin transfer is more sensitive to the strange sea $s\\bar s$ asymmetry.

  18. X(5568) as a {su}\\bar{d}\\bar{b} tetraquark in a simple quark model

    Science.gov (United States)

    Stancu, Fl

    2016-10-01

    The S-wave eigenstates of tetraquarks of type {su}\\bar{d}\\bar{b} with J P = 0+, 1+ and 2+ are studied within a simple quark model with chromomagnetic interaction and effective quark masses extracted from meson and baryon spectra. It is tempting to see if this spectrum can accommodate the new narrow structure X(5568), observed by the DØ Collaboration, but not confirmed by the LHCb Collaboration. If it exists, such a tetraquark is a system with four different flavors and its study can improve our understanding of multiquark systems. The presently calculated mass of X(5568) agrees quite well with the experimental value of the DØ Collaboration. Predictions are also made for the spectrum of the charmed partner {su}\\bar{d}\\bar{c}. However we are aware of the difficulty of extracting effective quark masses, from mesons and baryons, to be used in multiquark systems.

  19. Improving strategies to assess competitive effects of barred owls on northern spotted owls in the Pacific Northwest

    Science.gov (United States)

    Wiens, J. David; Weekes, Anne

    2011-01-01

    A scientific study has determined that survey methods designed for spotted owls do not always detect barred owls that are actually present in spotted owl habitat. The researchers suggest that strategies to address potential interactions between spotted owls and barred owls will require carefully designed surveys that account for response behaviors and imperfect detection of both species. Species-specific sampling methods, which are proposed, can be used by forest managers to determine the occurrence and distribution of barred owls with high confidence. This fact sheet provides highlights of the research (Wiens and others, 2011).

  20. Response of the integrals in the Tremaine-Weinberg method to multiple pattern speeds: a counter-rotating inner bar in NGC 2950?

    CERN Document Server

    Maciejewski, W

    2006-01-01

    When integrals in the standard Tremaine-Weinberg method are evaluated for the case of a realistic model of a doubly barred galaxy, their modifications introduced by the second rotating pattern are in accord with what can be derived from a simple extension of that method, based on separation of tracer's density. This extension yields a qualitative argument that discriminates between prograde and retrograde inner bars. However, the estimate of the value of inner bar's pattern speed requires further assumptions. When this extension of the Tremaine-Weinberg method is applied to the recent observation of the doubly barred galaxy NGC 2950, it indicates that the inner bar there is counter-rotating, possibly with the pattern speed of -140 +/- 50 km/s/arcsec. The occurrence of counter-rotating inner bars can constrain theories of galaxy formation.

  1. Osmundiron, cleaved iron bars and slags (Osmundjern, kloder og kalotslagger)

    DEFF Research Database (Denmark)

    Buchwald, Vagn Fabritius

    1996-01-01

    Investigation of so-called Osmund iron, iron bars and slags from iron production in the medieval ages.......Investigation of so-called Osmund iron, iron bars and slags from iron production in the medieval ages....

  2. Rare kaon decays: $K^{+} → ^{+} \\bar{}$ and future

    Indian Academy of Sciences (India)

    Bipul Bhuyan

    2004-03-01

    The experimental progress in the search for $K^{+} → ^{+} \\bar{}$ will be presented in this paper. Also the physics potential of the proposed BNL experiment to search for $K_{L}^{0} → ^{0} \\bar{}$ (KOPIO) will be discussed.

  3. Strong resilience of topological codes to depolarization

    CERN Document Server

    Bombin, H; Ohzeki, Masayuki; Katzgraber, Helmut G; Martin-Delgado, M A

    2012-01-01

    The inevitable presence of decoherence effects in systems suitable for quantum computation necessitates effective error correction schemes to protect information from noise. We compute the stability of the toric code to depolarization by mapping the quantum problem onto a classical disordered eight-vertex Ising model. By studying the stability of the related ferromagnetic phase both via large-scale Monte Carlo simulations and via the duality method, we are able to demonstrate an increased error threshold of 18.9(3)% when noise correlations are taken into account. Remarkably, this agrees within error bars with the result for a different class of codes---topological color codes---where the mapping yields interesting new types of interacting 8-vertex models.

  4. Bar pattern speeds in CALIFA galaxies: I. Fast bars across the Hubble sequence

    CERN Document Server

    Aguerri, J A L; Falcón-Barroso, J; Amorin, A; Barrera-Ballesteros, J; Fernandes, R Cid; García-Benito, R; García-Lorenzo, B; Delgado, R M González; Husemann, B; Kalinova, V; Lyubenova, M; Marino, R A; Márquez, I; Mast, D; Pérez, E; Sánchez, S F; van de Ven, G; Walcher, C J; Backsmann, N; Cortijo-Ferrero, C; Bland-Hawthorn, J; del Olmo, A; Iglesias-Páramo, J; Pérez, I; Sánchez-Blázquez, P; Wisotzki, L; Ziegler, B

    2015-01-01

    The bar pattern speed ($\\Omega_{\\rm b}$) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring $\\Omega_{\\rm b}$. The non-parametric method proposed by Tremaine \\& Weinberg (1984; TW) and based on stellar kinematics is the most accurate. This method has been applied so far to 17 galaxies, most of them SB0 and SBa types. We have applied the TW method to a new sample of 15 strong and bright barred galaxies, spanning a wide range of morphological types from SB0 to SBbc. Combining our analysis with previous studies, we investigate 32 barred galaxies with their pattern speed measured by the TW method. The resulting total sample of barred galaxies allows us to study the dependence of $\\Omega_{\\rm b}$ on galaxy properties, such as the Hubble type. We measured $\\Omega_{\\rm b}$ using the TW method on the stellar velocity maps provided by the integral-field spectroscopy data from the CALIFA survey. Integral-field data solve the problem...

  5. Strong Trinucleotide Circular Codes

    Directory of Open Access Journals (Sweden)

    Christian J. Michel

    2011-01-01

    Full Text Available Recently, we identified a hierarchy relation between trinucleotide comma-free codes and trinucleotide circular codes (see our previous works. Here, we extend our hierarchy with two new classes of codes, called DLD and LDL codes, which are stronger than the comma-free codes. We also prove that no circular code with 20 trinucleotides is a DLD code and that a circular code with 20 trinucleotides is comma-free if and only if it is a LDL code. Finally, we point out the possible role of the symmetric group ∑4 in the mathematical study of trinucleotide circular codes.

  6. Initial magnetic field distribution around high rectangular bus bars

    OpenAIRE

    Cividjian Grigore A.

    2014-01-01

    The one-dimensional transient electromagnetic field in and around a system of two nonmagnetic homogenous rectangular high thin bars can be analytically evaluated if the ratio of average initial magnetic field on the two sides of thin bar, or of the ratio of initial magnetic fields in middle of the bar height is known. In this paper, using appropriate conformal mappings, an exact analytical solution for these ratios are proposed in the case of very thin bars...

  7. Development of omega-3 rich energy bar with flaxseed

    OpenAIRE

    Mridula, D.; Singh, K. K.; Barnwal, P.

    2011-01-01

    Energy bar sample were prepared with different levels of flaxseed (0–20%) in addition to cereals and pulses with varying levels of sweeteners (45, 50, and 55%) to deliver a nutritious food to the consumer. The developed bars were evaluated for textural, colour, nutritional quality, sensory attributes and total microbial load. Different levels of flaxseed and sweeteners significantly affected the hue and chroma values of the energy bar. In general the level of flaxseed in energy bar did not af...

  8. Decoding Different Patterns in Various Grey Tones Incorporated in the QR Code

    Directory of Open Access Journals (Sweden)

    Filip Cvitić

    2014-07-01

    Full Text Available Using colors in bar codes causes errors that may adversely affect their readability (Tan etal. 2010, given that the contrast between data and background modules is reduced. Due to the unreliability of using color bar codes, most designers still keep to the limitations placed by Pira International (Smithers Pira in 2002 (Williams, 2004. Since the contrast between data modules and background modules is the most important aspect in the process of reliable bar code decoding, this paper explores the dependence of reliable decoding of QR codes incorporated with combinations of grey tones on the technical characteristics of the cameras on smartphones that were marketed in the period between 2008 and 2012.

  9. Network Coding Over The 232

    DEFF Research Database (Denmark)

    Pedersen, Morten Videbæk; Heide, Janus; Vingelmann, Peter;

    2013-01-01

    Creating efficient finite field implementations has been an active research topic for several decades. Many appli- cations in areas such as cryptography, signal processing, erasure coding and now also network coding depend on this research to deliver satisfactory performance. In this paper we...... investigate the use of prime fields with a field size of 232 − 5, as this allows implementations which combines high field sizes and low complexity. First we introduce the algorithms needed to apply prime field arithmetics to arbitrary binary data. After this we present the initial throughput measurements...... will be useful in many network coding applications where large field sizes are required....

  10. Distributed source coding of video

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Van Luong, Huynh

    2015-01-01

    A foundation for distributed source coding was established in the classic papers of Slepian-Wolf (SW) [1] and Wyner-Ziv (WZ) [2]. This has provided a starting point for work on Distributed Video Coding (DVC), which exploits the source statistics at the decoder side offering shifting processing...... steps, conventionally performed at the video encoder side, to the decoder side. Emerging applications such as wireless visual sensor networks and wireless video surveillance all require lightweight video encoding with high coding efficiency and error-resilience. The video data of DVC schemes differ from...

  11. Large size superelastic SMA bars: heat treatment strategy, mechanical property and seismic application

    Science.gov (United States)

    Wang, Wei; Fang, Cheng; Liu, Jia

    2016-07-01

    This paper reports a comprehensive study on the mechanical performance of large size superelastic shape memory alloy (SMA) bars, with the main focus given to their potential applications for seismic-resistant connections. A series of practical issues, including heat treatment, mechanical property assessment, and connection design/evaluation, were discussed aiming to benefit both material and civil engineering communities. The study commenced with a detailed discussion on the heat treatment strategy for SMA bars and the resulting mechanical properties including strength/stiffness, self-centring ability, energy dissipation, and fractural resistance. It was observed that the mechanical performance of the bars were quite sensitive to both annealing temperature and duration, and size effect was also evident, resulting in different appropriate heat treatment procedures for the bars with varying diameters. The optimally heat-treated SMA bars were machined to the bolt form and were then used for two types of practical self-centring connections, namely, connection with all SMA bars and that with combined angles and SMA bars. Through conducting full-scale tests, both connections were shown to have stable and controllable hysteretic responses till 5% loading drift. Up to 3% drift, the self-centring performance was satisfactory for both connection types, but beyond that the presence of the angles could lead to accumulated residual rotation. Importantly, for both connections, the deformation was accommodated by the SMA bolts or angles, whereas no plastic deformation was observed at any other structural members. This confirmed the feasibility of using such connections for highly resilient structures where minimal repair work is required after earthquakes.

  12. Time-of-Flight Measurement of the Speed of Sound in a Metal Bar

    Science.gov (United States)

    Ganci, Salvatore

    2016-01-01

    A simple setup was designed for a "time-of-flight" measurement of the sound speed in a metal bar. The experiment requires low cost components and is very simple to understand by students. A good use of it is as a demonstration experiment.

  13. 77 FR 39467 - Stainless Steel Bar From India: Final Results of the Antidumping Duty Administrative Review

    Science.gov (United States)

    2012-07-03

    ...: Stainless Steel Bar from India, 59 FR 66915 (December 28, 1994). These cash deposit requirements, when... Rescission of the Antidumping Duty Administrative Review, 77 FR 13270 (March 6, 2012) (Preliminary Results... Antidumping Duty Administrative Review, 75 FR 7563 (February 22, 2010). This margin will apply to Chandan...

  14. 78 FR 7395 - Stainless Steel Bar From India: Preliminary Results of Antidumping Duty Administrative Review...

    Science.gov (United States)

    2013-02-01

    ... Determination of Sales at Less Than Fair Value: Stainless Steel Bar from India, 59 FR 66915, 66921 (December 28... in Certain Antidumping Proceedings: Final Modification, 77 FR 8101 (February 14, 2012). For Mukand... Antidumping Duties, 68 FR 23954 (May 6, 2003). Cash Deposit Requirements The following deposit...

  15. Upgrade of FUMACS code package

    International Nuclear Information System (INIS)

    The FUMACS code package (an acronym of FUel MAnagement Code System) was developed at Rudjer Boskovic Institute in year 1991 with the aim to enable in-core fuel management analysis of the NPP Krsko core for nominal (full power) conditions. The modernization and uprating of the NPP Krsko core from 1876 to 1994 MW (th) performed in year 2000 resulted in the change of operating conditions. The old version of the FUMACS code package would not model properly the NPP Krsko core for the new operating conditions. The upgrade of the FUMACS code package to enable the modeling of the NPP Krsko core for uprated conditions and longer cycles required modifications of master files, libraries and codes. In order to make the code package more user friendly, Windows (95/98/NT) compatible version of the code package, with incorporated graphical user interface has been developed. The new version of the code package has been verified and validated for new operating conditions through modeling and comparison of results with referent design of a number of 12-month and 18-month operating cycles.(author)

  16. Prediction of Vibration Transmission within Periodic Bar Structures

    DEFF Research Database (Denmark)

    Domadiya, Parthkumar Gandalal; Andersen, Lars Vabbersgaard; Sorokin, Sergey

    2012-01-01

    The present analysis focuses on vibration transmission within semi-infinite bar structure. The bar is consisting of two different materials in a periodic manner. A periodic bar model is generated using two various methods: The Finite Element method (FEM) and a Floquet theory approach. A parameter...

  17. 21 CFR 886.5800 - Ophthalmic bar reader.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar reader. 886.5800 Section 886.5800...) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5800 Ophthalmic bar reader. (a) Identification. An ophthalmic bar reader is a device that consists of a magnifying lens intended for use by...

  18. $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ As the Lightest $c\\bar c s \\bar s$ State

    CERN Document Server

    Lebed, Richard F

    2016-01-01

    The state $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ has recently been demoted by the Particle Data Group from its previous status as the conventional $c\\bar c$ $2 {}^3P_0$ state, largely due to the absence of expected $D\\bar D$ decays. We propose that $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ is actually the lightest $c\\bar c s \\bar s$ state, and calculate the spectrum of such states using the diquark model, identifying many of the observed charmoniumlike states that lack open-charm decay modes as $c\\bar c s \\bar s$. Among other results, we argue that $Y(4140)$ is a $J^{PC} = 1^{++}$ $c\\bar c s \\bar s$ state that has been not been seen in two-photon fusion largely as a consequence of the Landau-Yang theorem.

  19. Seismic Behavor of RC Beam-Column Joint with Additional Bars under Cyclic Loading

    Institute of Scientific and Technical Information of China (English)

    LU Xilin; Tonny H.URUKAP; LI Sen

    2011-01-01

    The behavior of Beam-Column Joints in moment resisting frame structures are susceptible to damage caused by seismic effects due to poor performance of the joint. A good number of researches were carried out to understand the complex mechanism of RC joints which are considered in seismic design code practices presently adopted. The traditional construction detailing of transverse reinforcement have shown serious joint failure.This paper introduces a new design philosophy involving the use of additional diagonal bars within the joint particularly suitable for low to medium seismic effects in earthquake zones throughout the world. In lieu to this study, ten (10) full-scale interior beam-column specimens were constructed with various additional reinforcement details and configurations as will be discussed in the later. The experiment provided adequate results to proof the idea of additional bars as suitable approach in reinforced concrete structures where earthquake is eminent. While compared with overall cracking observation during the test, the specimen with additional bars (diagonal and straight) had shown few cracks on the column than the ones without. Furthermore, concrete confinement is certainly an important design method as recommended by certain international codes.

  20. Joint source channel coding using arithmetic codes

    CERN Document Server

    Bi, Dongsheng

    2009-01-01

    Based on the encoding process, arithmetic codes can be viewed as tree codes and current proposals for decoding arithmetic codes with forbidden symbols belong to sequential decoding algorithms and their variants. In this monograph, we propose a new way of looking at arithmetic codes with forbidden symbols. If a limit is imposed on the maximum value of a key parameter in the encoder, this modified arithmetic encoder can also be modeled as a finite state machine and the code generated can be treated as a variable-length trellis code. The number of states used can be reduced and techniques used fo

  1. High brightness beam shaping and fiber coupling of laser-diode bars.

    Science.gov (United States)

    Yu, Junhong; Guo, Linui; Wu, Hualing; Wang, Zhao; Tan, Hao; Gao, Songxin; Wu, Deyong; Zhang, Kai

    2015-04-10

    The strong beam quality mismatch in the fast and slow axes of laser-diode bars requires a significant beam shaping method to reach the parameters needed for fiber coupling. An effective solution to this problem is proposed that is based on a right-angle prism array and a distributed cylinder-lens stack. Coupling 12 mini-bars into a standard 100 μm core diameter and 0.15 numerical aperture fiber is achieved, and the output power can reach 400 W. Using this technique, production of compact and high brightness fiber-coupled laser-diode modules is possible.

  2. A train for the bus(bars)

    CERN Multimedia

    CERN Bulletin

    2013-01-01

    On 8 April, the first SMACC (Superconducting Magnets and Circuits Consolidation) teams began work in the LHC tunnel. They are responsible for opening the interconnects between the magnets, laying the groundwork for the series of operations that will be performed by the team riding the ‘consolidation train’.   A technician installs the machine tool that allows them to prepare the surface of the section of the bar where the shunt will be fixed. The LHC’s 1,670 dipoles and quadrupoles are powered by power converters and connected by copper 'busbars’. The superconducting cables run through these bars, carrying a current of up to 11,850 amps. Six superconducting cables meet at each interconnect, where they are held together by a soldered (see box) electrical connection sandwiched between two pieces of copper, forming the splice between the busbars of the neighbouring magnets. The integrity of the electrical circuit is depen...

  3. Arbejdsulykker inden for BAR-SOSU

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    Denne rapport er udarbejdet til BAR SOSU, som har formuleret følgende opgave: 1. At få udarbejdet et overblik over den viden om ulykker indenfor SOSU´s område, som foreligger i eksisterende statistikker, med henblik på udviklingen over de seneste 5-10 år, ulykkernes konsekvenser i form af skadens...... art og i det omfang det er muligt også ulykkernes art. 2. At få gennemgået BAR SOSU´s nuværende materiale målrettet ulykkesforebyggelse og vurdere, hvad der kan udvikles yderligere til brug for at styrke det ulykkesforebyggende arbejde. 3. Med udgangspunkt i nyere forskning om ulykkesforebyggelse og...

  4. The Disability Dilemma: A Skeptical Bench & Bar

    Directory of Open Access Journals (Sweden)

    Wendy F. Hensel

    2008-04-01

    Full Text Available The legal profession is no stranger to the bias and prejudice present in American society. Members of the bar have been shown to engage in both conscious and subconscious sexism and racism, posing challenges to the profession as the profile of those practicing law has changed over the last several decades to admit increasing numbers of women and minorities.1 Nevertheless, it is notable that few, if any, members of the bar today would question openly whether women or people of color have the ability to be successful, productive members of the profession. Instead, the conventional wisdom is that the greatest obstacles to their success will come in the form of external barriers and institutional policies based on preconceived norms that do not acknowledge the divergent challenges faced by these group members.

  5. A Distinct Structure Inside the Galactic Bar

    CERN Document Server

    Nishiyama, S; Baba, D; Haba, Y; Kadowaki, R; Kato, D; Kurita, M; Nagashima, C; Nagayama, T; Murai, Y; Nakajima, Y; Tamura, M; Nakaya, H; Sugitani, K; Naoi, T; Matsunaga, N; Tanabé, T; Kusakabe, N; Sato, S; Nishiyama, Shogo; Nagata, Tetsuya; Baba, Daisuke; Haba, Yasuaki; Kadowaki, Ryota; Kato, Daisuke; Kurita, Mikio; Nagashima, Chie; Nagayama, Takahiro; Murai, Yuka; Nakajima, Yasushi; Tamura, Motohide; Nakaya, Hidehiko; Sugitani, Koji; Naoi, Takahiro; Matsunaga, Noriyuki; Tanabe, Toshihiko; Kusakabe, Nobuhiko; Sato, Shuji

    2005-01-01

    We present the result of a near-infrared (J H Ks) survey along the Galactic plane, -10.5deg < l < +10.5deg and b=+1.0deg, with the IRSF 1.4m telescope and the SIRIUS camera. Ks vs. H-Ks color-magnitude diagrams reveal a well-defined population of red clump (RC) stars whose apparent magnitude peak changes continuously along the Galactic plane, from Ks=13.4 at l=-10deg to Ks=12.2 at l=+10deg after dereddening. This variation can be explained by the bar-like structure found in previous studies, but we find an additional inner structure at |l| < 4deg, where the longitude - apparent magnitude relation is distinct from the outer bar, and the apparent magnitude peak changes by only 0.1 mag over the central 8deg. The exact nature of this inner structure is as yet uncertain.

  6. A Pixel Domain Video Coding based on Turbo code and Arithmetic code

    Directory of Open Access Journals (Sweden)

    Cyrine Lahsini

    2012-05-01

    Full Text Available In recent years, with emerging applications such as multimedia sensors networks, wirelesslow-power surveillance and mobile camera phones, the traditional video coding architecture in beingchallenged. In fact, these applications have different requirements than those of the broadcast videodelivery systems: a low power consumption at the encoder side is essential.In this context, we propose a pixel-domain video coding scheme which fits well in these senarios.In this system, both the arithmetic and turbo codes are used to encode the video sequence's frames.Simulations results show significant gains over Pixel-domain Wyner-Ziv video codeingr.

  7. Rock Bar BTR -liiketoimintasuunnitelma baariyrityksen perustamiseksi

    OpenAIRE

    Rieppo, Jani

    2015-01-01

    Laurea-ammattikorkeakoulu Tiivistelmä Laurea Leppävaara Hotelli- ja ravintola-alan liikkeenjohdon koulutusohjelma Rieppo, Jani Rock Bar BTR -liiketoimintasuunnitelma baariyrityksen perustamiseksi Vuosi 2015 Sivumäärä 58 Tämän toiminnallisen opinnäytetyön tarkoituksena on liiketoimintasuunnitelman laatiminen uudelle rock-baarille, jonka avaaminen Joensuuhun on suunnitelman laatijan toimesta mahdollista joskus tulevaisuudessa. Tavo...

  8. Hadron Physics in BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Lafferty, G.D.; /Manchester U.

    2005-08-29

    Some recent results in hadron physics from the BaBar experiment are discussed. In particular, the observation of two new charmed states, the D*{sub sJ}{sup +}(2317) and the D*{sub sJ}{sup +}(2457), is described, and results are presented on the first measurement of the rare decay mode of the B meson, B{sup 0} {pi}{sup 0}{pi}{sup 0}.

  9. The Expansion of Speakeasy Bar and Grill

    OpenAIRE

    Mills, Joel

    2012-01-01

    This strategic analysis makes recommendations on a course of action for Speakeasy Bar and Grill, located in Vancouver, British Columbia, with regards to growth of the brand. The comprehensive analysis determined that Speakeasy currently generates a competitive source of advantage in large part from the high level of direct involvement of its owners as managers, both in terms of cost and customer value advantages. Sustaining this advantage as the company grows with greater demands being placed...

  10. Dowel Bar Retrofit Mix Design and Specification

    OpenAIRE

    Deshpande, Yogini; Olek, Jan

    2012-01-01

    When dealing with the issue of repair of concrete pavement repair using dowel bar retrofit technique, it is very desirable for the repair material to have high fluidity that can ensure good compaction and facilitate flow to tight spaces, preferably without the use of a vibrator. The focus of this project was on identifying critical properties that control long-term performance of repair concrete, especially rapid-setting materials extended using pea gravel (maximum size aggregate 9.5 mm). ...

  11. Optimization of Watt's Six-bar Linkage to Generate Straight and Parallel Leg Motion

    Directory of Open Access Journals (Sweden)

    Saeed Akbarnejad

    2008-11-01

    Full Text Available This paper considers optimal synthesis of a special type of four-bar linkages. Combination of this optimal four-bar linkage with on of it's cognates and elimination of two redundant cognates will result in a Watt's six-bar mechanism, which generates straight and parallel motion. This mechanism can be utilized for legged machines. The advantage of this mechanism is that the leg remains straight during it's contact period and because of it's parallel motion, the legs can be as wide as desired to increase contact area and decrease the number of legs required to keep body's stability statically and dynamically. "Genetic algorithm" optimization method is used to find optimal lengths. It is especially useful for problems like the coupler curve equation which are completely nonlinear or extremely difficult to solve.

  12. Leptonic B Decays at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Monorchio, Diego; /INFN, Naples /Naples U.

    2011-09-13

    The authors will present the most recent results on leptonic B decays B{sup {+-}(0)} {yields} K*{sup {+-}(0)} {nu}{bar {nu}} and B{sup {+-}} {yields} {mu}{sup {+-}}{nu}, based on the data collected by the BaBar detector at PEP-II, an asymmetric e{sup +}e{sup -} collider at the center of mass energy of the {Upsilon}(4S) resonance. Rare B decays have always been a standard probe for New Physics (NP) searches. The very low Standard Model (SM) rate of these decays often make them unaccessible with the present experimental datasets, unless NP effects enhance the rate up to the current experimental sensitivity. Moreover, as NP effects can modify the decay kinematic, particular attention must be payed in order to perform a model independent analysis. A B-Factory provides an unique environment where to investigate these processes. The high number of B{bar B} pairs produced by a B-Factory often allows to approach the needed experimental sensitivity. Moreover, the clean environment and the closed kinematic of the initial state enable to obtaining a very pure sample where to look for these decays.

  13. Leptonic B Decays at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Baracchini, Elisabetta; /Rome U. /INFN, Rome

    2011-11-10

    We will present the most recent results on leptonic B decays B{sup {+-}(0)} {yields} K*{sup {+-}(0)}{nu}{bar {nu}} and B{sup {+-}} {yields} {mu}{sup {+-}}{nu}, based on the data collected by the BaBar detector at PEP-II, an asymmetric e{sup +}e{sup -} collider at the center of mass energy of the {Upsilon}(4S) resonance. Rare B decays have always been a standard probe for New Physics (NP) searches. The very low Standard Model (SM) rate of these decays often make them unaccessible with the present experimental datasets, unless NP effects enhance the rate up to the current experimental sensitivity. Moreover, as NP effects can modify the decay kinematic, particular attention must be paid in order to perform a model independent analysis. A B-Factory provides an unique environment to investigate these processes. The high number of B{bar B} pairs produced by a B-Factory often allows to approach the needed experimental sensitivity. Moreover, the clean environment and the closed kinematic of the initial state enable to obtaining a very pure sample where to look for these decays.

  14. Model Children's Code.

    Science.gov (United States)

    New Mexico Univ., Albuquerque. American Indian Law Center.

    The Model Children's Code was developed to provide a legally correct model code that American Indian tribes can use to enact children's codes that fulfill their legal, cultural and economic needs. Code sections cover the court system, jurisdiction, juvenile offender procedures, minor-in-need-of-care, and termination. Almost every Code section is…

  15. Initial magnetic field distribution around high rectangular bus bars

    Directory of Open Access Journals (Sweden)

    Cividjian Grigore A.

    2014-01-01

    Full Text Available The one-dimensional transient electromagnetic field in and around a system of two nonmagnetic homogenous rectangular high thin bars can be analytically evaluated if the ratio of average initial magnetic field on the two sides of thin bar, or of the ratio of initial magnetic fields in middle of the bar height is known. In this paper, using appropriate conformal mappings, an exact analytical solution for these ratios are proposed in the case of very thin bars. Obtained values are compared with FEM results for relatively thick bars.

  16. Antihydrogen Production in $ \\bar{p} $ Z - interaction

    CERN Multimedia

    2002-01-01

    % PS210 \\\\ \\\\ The production of the antihydrogen atom $ \\bar {H}^0 \\equiv \\bar{p}e $ as the simplest atomic bound state of antimatter has been studied. Nine $ \\bar {H}^0 $ have been observed.\\\\ \\\\ The production of $ \\bar {H}^0 $ is predominantly mediated by the two-photon mechanism in the antiproton-nucleus interaction. In principle $ \\bar {H}^0 $ is well suited for investigations of fundamental CPT violation studies under different forces, however, in the present experiment we concentrated on the production of this antimatter object, since so far it never had been observed.

  17. Heat Transfer in the LHC Main Superconducting Bus Bars

    CERN Document Server

    Granieri, P P; Richter, D

    2011-01-01

    CERN is performing a systematic analysis of the interconnecting bus bars of the Large Hadron Collider (LHC) main magnets. Their thermal, electrical, mechanical and hydraulic performances are addressed. In the frame of these studies, the heat transfer between the main superconducting (SC) bus bars and the surrounding He bath is investigated. It represents a key parameter in the comprehension of the bus bars stability and quench propagation mechanisms, thus crucial for the analysis of the 2008 incident which was triggered by a defective bus bars joint. This paper reports on the experimental tests and relative analysis aiming at describing the thermal behavior of the LHC main bus bars.

  18. Which bulges are favoured by barred S0 galaxies?

    CERN Document Server

    Barway, Sudhanshu; Vaghmare, Kaustubh; Kembhavi, Ajit K

    2016-01-01

    S0 galaxies are known to host classical bulges with a broad range of size and mass, while some such S0s are barred and some not. The origin of the bars has remained as a long-standing problem -- what made bar formation possible in certain S0s? By analysing a large sample of S0s with classical bulges observed by the Spitzer space telescope, we find that most of our barred S0s host comparatively low-mass classical bulges, typically with bulge-to-total ratio ($B/T$) less than $0.5$; whereas S0s with more massive classical bulges than these do not host any bar. Furthermore, we find that amongst the barred S0s, there is a trend for the longer and massive bars to be associated with comparatively bigger and massive classical bulges -- possibly suggesting bar growth being facilitated by these classical bulges. In addition, we find that the bulge effective radius is always less than the bar effective radius --indicating an interesting synergy between the host classical bulge and bars being maintained while bar growth ...

  19. On the galactic spin of barred disk galaxies

    CERN Document Server

    Cervantes-Sodi, Bernardo; Park, Changbom; Wang, Lixin

    2013-01-01

    We present a study of the connection between the galactic spin parameter $\\lambda_{d}$ and the bar fraction in a volume-limited sample of 10,674 disk galaxies drawn from the Sloan Digital Sky Survey Data Release 7. The galaxies in our sample are visually classified into galaxies hosting strong or weak bars, and non-barred galaxies. We find that the spin distributions of these three classes are statistically different, with galaxies hosting strong bars with the lowest $\\lambda_{d}$ values, followed by non-barred galaxies, while galaxies with weak bars present typically high spin parameters. The bar fraction presents its maximum at low to intermediate $\\lambda_{d}$ values for the case of strong bars, while the maximum for weak bars is at high $\\lambda_{d}$. This bi-modality is in good agreement with previous studies finding stronger bars hosted by luminous, massive, red galaxies with low content of cold gas, while weak bars are found in low luminosity, low mass, blue galaxies, usually gas rich. In addition, the...

  20. Automated bar detection in local disc galaxies from the SDSS - The colors of bars

    CERN Document Server

    Consolandi, Guido

    2016-01-01

    This paper describes an automatic isophotal fitting procedure that succeeds, without the support of any visual inspection of neither the images nor the ellipticity/P.A. radial profiles, at extracting a fairly pure sample of barred LTGs among thousands of optical images from the SDSS. The procedure relies on the methods described in Consolandi et al. (2016) to robustly extract the photometrical properties of a large sample of local SDSS galaxies and is tailored to extract bars on the basis of their well-known peculiarities in their P.A. and ellipticity profiles. It has been run on a sample of 5853 galaxies in the Coma and Local supercluster. The procedure extracted for each galaxy a color, an ellipticity and a position angle radial profile of the ellipses fitted to the isophotes. Examining automatically the profiles of 922 face-on late-type galaxies (B/A >0.7) the procedure found that ~ 36 % are barred. The local bar fraction strongly increases with stellar mass. The sample of barred galaxies is used to constr...

  1. Slowly rotating bars-Morphologies introduced by bistability in barred-spiral galactic potentials

    CERN Document Server

    Tsigaridi, L

    2015-01-01

    We investigate the orbital dynamics of a \\textit{barred-spiral} model when the system is rotating slowly and corotation is located beyond the end of the spiral arms. In the characteristic of the central family of periodic orbits we find a "bistable region". In the response model we observe a ring surrounding the bar and spiral arms starting tangential to the ring. This is a morphology resembling barred-spiral systems with inner rings. However, the dynamics associated with this structure in the case we study is different from that of a typical bar ending close to corotation. The ring of our model is round, or rather elongated perpendicular to the bar. It is associated with a folding (an "S" shaped feature) of the characteristic of the central family, which is typical in bistable bifurcations. Along the "S" part of the characteristic we have a change in the orientation of the periodic orbits from a x1-type to a x2-type morphology. The orbits populated in the response model change rather abruptly their orientati...

  2. The relation between bar formation, galaxy luminosity, and environment

    CERN Document Server

    Corsini, E M; Sanchez-Janssen, R; Aguerri, J A L; Zarattini, S

    2013-01-01

    We derive the bar fraction in three different environments ranging from the field to Virgo and Coma clusters, covering an unprecedentedly large range of galaxy luminosities (or, equivalently, stellar masses). We confirm that the fraction of barred galaxies strongly depends on galaxy luminosity. We also show that the difference between the bar fraction distributions as a function of galaxy luminosity (and mass) in the field and Coma cluster are statistically significant, with Virgo being an intermediate case. We interpret this result as a variation of the effect of environment on bar formation depending on galaxy luminosity. We speculate that brighter disk galaxies are stable enough against interactions to keep their cold structure, thus, the interactions are able to trigger bar formation. For fainter galaxies the interactions become strong enough to heat up the disks inhibiting bar formation and even destroying the disks. Finally, we point out that the controversy regarding whether the bar fraction depends on...

  3. Buffer Overflow Detection on Binary Code

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yan-fei; LI Hui; CHEN Ke-fei

    2006-01-01

    Most solutions for detecting buffer overflow are based on source code. But the requirement for source code is not always practical especially for business software. A new approach was presented to detect statically the potential buffer overflow vulnerabilities in the binary code of software. The binary code was translated into assembly code without the lose of the information of string operation functions. The feature code abstract graph was constructed to generate more accurate constraint statements, and analyze the assembly code using the method of integer range constraint. After getting the elementary report on suspicious code where buffer overflows possibly happen, the control flow sensitive analysis using program dependence graph was done to decrease the rate of false positive. A prototype was implemented which demonstrates the feasibility and efficiency of the new approach.

  4. Constructions of Rank Modulation Codes

    CERN Document Server

    Mazumdar, Arya; Zémor, Gilles

    2011-01-01

    Rank modulation is a way of encoding information to correct errors in flash memory devices as well as impulse noise in transmission lines. Modeling rank modulation involves construction of packings of the space of permutations equipped with the Kendall tau distance. We present several general constructions of codes in permutations that cover a broad range of code parameters. In particular, we show a number of ways in which conventional error-correcting codes can be modified to correct errors in the Kendall space. Codes that we construct afford simple encoding and decoding algorithms of essentially the same complexity as required to correct errors in the Hamming metric. For instance, from binary BCH codes we obtain codes correcting $t$ Kendall errors in $n$ memory cells that support the order of $n!/(\\log_2n!)^t$ messages, for any constant $t= 1,2,...$ We also construct families of codes that correct a number of errors that grows with $n$ at varying rates, from $\\Theta(n)$ to $\\Theta(n^{2})$. One of our constr...

  5. Numerical study of subcooled boiling phenomena using a component analysis code, CUPID

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ba-Ro; Lee, Yeon-Gun [Jeju National University, Jeju (Korea, Republic of)

    2015-10-15

    In this study, a couple of subcooled boiling experiments at high- (> 10 bar) and low-pressure (near atmospheric pressure) conditions are analyzed using a three-dimensional thermal-hydraulic component code, CUPID. And then the analysis results compared with the results using MARS-KS code. Subcooled boiling experiments at high- and low pressure conditions are analyzed using a three dimensional thermal-hydraulic component code, CUPID. The predictions of the CUPID code shows good agreement with Christenses's data and Bartolomey's data obtained at high pressure conditions. Subcooled boiling is encountered in many industrial applications in the power and process industry. In nuclear reactors, under certain conditions, subcooled boiling may be encountered in the core. The movement of bubbles generated by subcooled boiling affect the heat transfer characteristics and the pressure drop of the system. Thus some experimental and analysis using safety codes works have been already performed by previous investigators. It has been reported that the existing safety analysis codes have some weaknesses in predicting subcooled boiling phenomena at low pressure conditions. Thus, it is required to improve the predictive capability of thermal-hydraulic analysis codes on subcooled boiling phenomenon at low-pressure conditions. At low pressure condition, the CUPID code generally is overestimated prediction of the void fraction. Thus, we did selected submodels in the heat partitioning model by sensitivity analysis. Selected submodels of M{sub c}ase 4 are Kocamustafaogullari and Ishii correlation model of active nucleate site density, N' and Fritz correlation model of bubble departure diameter, d{sub Bd} . And then, case 5 - 8 are reanalysis using submodels of M{sub c}ase 4. The calculated void fraction is compared the default CUPID code model to the modified CUPID code model. As a result, average void fraction error was reduced from 0.081 to 0.011 and 0.128 to 0.024, 0

  6. Nonbinary quantum codes

    OpenAIRE

    Eric M. Rains

    1997-01-01

    We present several results on quantum codes over general alphabets (that is, in which the fundamental units may have more than 2 states). In particular, we consider codes derived from finite symplectic geometry assumed to have additional global symmetries. From this standpoint, the analogues of Calderbank-Shor-Steane codes and of GF(4)-linear codes turn out to be special cases of the same construction. This allows us to construct families of quantum codes from certain codes over number fields...

  7. Rateless feedback codes

    DEFF Research Database (Denmark)

    Sørensen, Jesper Hemming; Koike-Akino, Toshiaki; Orlik, Philip

    2012-01-01

    This paper proposes a concept called rateless feedback coding. We redesign the existing LT and Raptor codes, by introducing new degree distributions for the case when a few feedback opportunities are available. We show that incorporating feedback to LT codes can significantly decrease both...... the coding overhead and the encoding/decoding complexity. Moreover, we show that, at the price of a slight increase in the coding overhead, linear complexity is achieved with Raptor feedback coding....

  8. Affine Grassmann codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Beelen, Peter; Ghorpade, Sudhir Ramakant

    2010-01-01

    We consider a new class of linear codes, called affine Grassmann codes. These can be viewed as a variant of generalized Reed-Muller codes and are closely related to Grassmann codes.We determine the length, dimension, and the minimum distance of any affine Grassmann code. Moreover, we show that...... affine Grassmann codes have a large automorphism group and determine the number of minimum weight codewords....

  9. Cracking the Code: Assessing Institutional Compliance with the Australian Code for the Responsible Conduct of Research

    Science.gov (United States)

    Morris, Suzanne E.

    2010-01-01

    This paper provides a review of institutional authorship policies as required by the "Australian Code for the Responsible Conduct of Research" (the "Code") (National Health and Medical Research Council (NHMRC), the Australian Research Council (ARC) & Universities Australia (UA) 2007), and assesses them for Code compliance. Institutional authorship…

  10. Multimedia Data Coding and its Development

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The requirements of data coding in multimedia applications are presented, the current technique of coding and relative standards is introduced, then the work that have been doing is presented, i.e. the wavelet-based coding method and the VE (Visual Entropy)-based coding method. The experiment results prove that these methods have gained a better perceptual quality of a reconstructed image and a lower bit rate. Their performance evaluations are better than JPEG (Joint Photographic Experts Group) coding. Finally, the future topics of study are put forward.

  11. Advanced video coding systems

    CERN Document Server

    Gao, Wen

    2015-01-01

    This comprehensive and accessible text/reference presents an overview of the state of the art in video coding technology. Specifically, the book introduces the tools of the AVS2 standard, describing how AVS2 can help to achieve a significant improvement in coding efficiency for future video networks and applications by incorporating smarter coding tools such as scene video coding. Topics and features: introduces the basic concepts in video coding, and presents a short history of video coding technology and standards; reviews the coding framework, main coding tools, and syntax structure of AV

  12. Polyphase alternating codes

    Directory of Open Access Journals (Sweden)

    M. Markkanen

    2008-08-01

    Full Text Available We present a new class of alternating codes. Instead of the customary binary phase codes, the new codes utilize either p or p–1 phases, where p is a prime number. The first class of codes has code length pm, where m is a positive integer, the second class has code length p–1. We give an actual construction algorithm, and explain the principles behind it. We handle a few specific examples in detail. The new codes offer an enlarged collection of code lengths for radar experiments.

  13. Coupling CFD code with system code and neutron kinetic code

    International Nuclear Information System (INIS)

    Highlights: • Coupling interface between CFD code Fluent and system code Athlet was created. • Athlet code is internally coupled with neutron kinetic code Dyn3D. • Explicit coupling of overlapped computational domains was used. • A coupled system of Athlet/Dyn3D+Fluent codes was successfully tested on a real case. - Abstract: The aim of this work was to develop the coupling interface between CFD code Fluent and system code Athlet internally coupled with neutron kinetic code Dyn3D. The coupling interface is intended for simulation of complex transients such as Main Steam Line Break scenarios, which cannot be modeled separately first by system and neutron kinetic code and then by CFD code, because of the feedback between the codes. In the first part of this article, the coupling method is described. Explicit coupling of overlapped computational domains is used in this work. The second part of the article presents a demonstration simulation performed by the coupled system of Athlet/Dyn3D and Fluent. The “Opening a Steam Dump to the Atmosphere” test carried out at the Temelin NPP (VVER-1000) was simulated by the coupled system. In this simulation, the primary and secondary circuits were modeled by Athlet, mixing in downcomer and lower plenum was simulated by Fluent and heat generation in the core was calculated by Dyn3D. The results of the simulation with Athlet/Dyn3D+Fluent were compared with the experimental data and the results from a calculation performed with Athlet/Dyn3D without Fluent

  14. MetaBar - a tool for consistent contextual data acquisition and standards compliant submission

    Directory of Open Access Journals (Sweden)

    Kottmann Renzo

    2010-06-01

    Full Text Available Abstract Background Environmental sequence datasets are increasing at an exponential rate; however, the vast majority of them lack appropriate descriptors like sampling location, time and depth/altitude: generally referred to as metadata or contextual data. The consistent capture and structured submission of these data is crucial for integrated data analysis and ecosystems modeling. The application MetaBar has been developed, to support consistent contextual data acquisition. Results MetaBar is a spreadsheet and web-based software tool designed to assist users in the consistent acquisition, electronic storage, and submission of contextual data associated to their samples. A preconfigured Microsoft® Excel® spreadsheet is used to initiate structured contextual data storage in the field or laboratory. Each sample is given a unique identifier and at any stage the sheets can be uploaded to the MetaBar database server. To label samples, identifiers can be printed as barcodes. An intuitive web interface provides quick access to the contextual data in the MetaBar database as well as user and project management capabilities. Export functions facilitate contextual and sequence data submission to the International Nucleotide Sequence Database Collaboration (INSDC, comprising of the DNA DataBase of Japan (DDBJ, the European Molecular Biology Laboratory database (EMBL and GenBank. MetaBar requests and stores contextual data in compliance to the Genomic Standards Consortium specifications. The MetaBar open source code base for local installation is available under the GNU General Public License version 3 (GNU GPL3. Conclusion The MetaBar software supports the typical workflow from data acquisition and field-sampling to contextual data enriched sequence submission to an INSDC database. The integration with the megx.net marine Ecological Genomics database and portal facilitates georeferenced data integration and metadata-based comparisons of sampling sites as

  15. Dependence of Barred Galaxy Fraction on Galaxy Properties and Environment

    CERN Document Server

    Lee, Gwang-Ho; Lee, Myung Gyoon; Choi, Yun-Young

    2011-01-01

    We investigate the dependence of occurrence of bars in galaxies on galaxy properties and environment. We use a volume-limited sample of 33,391 galaxies brighter than $M_{r}=-19.5+5$log$h$ at $0.02\\le z\\le0.05489$, drawn from the SDSS DR 7. We classify the galaxies into early and late types, and identify bars by visual inspection. Among 10,674 late-type galaxies with axis ratio $b/a>0.60$, we find 3,240 barred galaxies ($f_{bar}=30.4%$) which divide into 2,542 strong bars ($f_{SB1}=23.8%$) and 698 weak bars ($f_{SB2}=6.5%$). We find that $f_{SB1}$ increases as $u-r$ color becomes redder, and that it has a maximum value at intermediate velocity dispersion ($\\sigma\\simeq$150 km s$^{-1}$). This trend suggests that strong bars are dominantly hosted by intermediate-mass systems. Weak bars prefer bluer galaxies with lower mass and lower concentration. In the case of strong bars, their dependence on the concentration index appears only for massive galaxies with $\\sigma>150$ km s${}^{-1}$. We also find that $f_{bar}$ ...

  16. Finite Element Simulations to Explore Assumptions in Kolsky Bar Experiments.

    Energy Technology Data Exchange (ETDEWEB)

    Crum, Justin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-05

    The chief purpose of this project has been to develop a set of finite element models that attempt to explore some of the assumptions in the experimental set-up and data reduction of the Kolsky bar experiment. In brief, the Kolsky bar, sometimes referred to as the split Hopkinson pressure bar, is an experimental apparatus used to study the mechanical properties of materials at high strain rates. Kolsky bars can be constructed to conduct experiments in tension or compression, both of which are studied in this paper. The basic operation of the tension Kolsky bar is as follows: compressed air is inserted into the barrel that contains the striker; the striker accelerates towards the left and strikes the left end of the barrel producing a tensile stress wave that propogates first through the barrel and then down the incident bar, into the specimen, and finally the transmission bar. In the compression case, the striker instead travels to the right and impacts the incident bar directly. As the stress wave travels through an interface (e.g., the incident bar to specimen connection), a portion of the pulse is transmitted and the rest reflected. The incident pulse, as well as the transmitted and reflected pulses are picked up by two strain gauges installed on the incident and transmitted bars as shown. By interpreting the data acquired by these strain gauges, the stress/strain behavior of the specimen can be determined.

  17. The Structure of the Milky Way's Bar Outside the Bulge

    CERN Document Server

    Wegg, Christopher; Portail, Matthieu

    2015-01-01

    While it is incontrovertible that the inner Galaxy contains a bar, its structure near the Galactic plane has remained uncertain, where extinction from intervening dust is greatest. We investigate here the Galactic bar outside the bulge, the long bar, using red clump giant (RCG) stars from UKIDSS, 2MASS, VVV, and GLIMPSE. We match and combine these surveys to investigate a wide area in latitude and longitude, |b|<9deg and |l|<40deg. We find: (1) The bar extends to l~25deg at |b|~5deg from the Galactic plane, and to l~30deg at lower latitudes. (2) The long bar has an angle to the line-of-sight in the range (28-33)deg, consistent with studies of the bulge at |l|<10deg. (3) The scale-height of RCG stars smoothly transitions from the bulge to the thinner long bar. (4) There is evidence for two scale heights in the long bar. We find a ~180pc thin bar component reminiscent of the old thin disk near the sun, and a ~45pc super-thin bar component which exists predominantly towards the bar end. (5) Constructing...

  18. How can double-barred galaxies be long-lived?

    CERN Document Server

    Wozniak, Herve

    2015-01-01

    Double-barred galaxies account for almost one third of all barred galaxies, suggesting that secondary stellar bars, which are embedded in large-scale primary bars, are long-lived structures. However, up to now it has been hard to self-consistently simulate a disc galaxy that sustains two nested stellar bars for longer than a few rotation periods. N-body/hydrodynamical simulations including star formation recipes have been performed. Their properties have been compared with the most recent observational data in order to prove that they are representative of double-barred galaxies, even SB0. Overlaps in dynamical resonances and bar modes have been looked for using Fourier spectrograms. Double-barred galaxies have been successfully simulated with lifetimes as long as 7 Gyr. The stellar population of the secondary bar is younger on average than for the primary large-scale bar. An important feature of these simulations is the absence of any resonance overlap for several Gyr. In particular, there is no overlap betw...

  19. Obtention control bars patterns for a BWR using Tabo search; Obtencion de patrones de barras de control para un BWR usando busqueda Tabu

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, A.; Ortiz, J.J.; Alonso, G. [Instituto Nacional de Investigaciones Nucleares, Km. 36.5 Carretera Mexico-Toluca, Ocoyoacac, Estado de Mexico 52045 (Mexico); Morales, L.B. [UNAM, IIMAS, Ciudad Universitaria, D. F. 04510 (Mexico); Valle, E. del [IPN, ESFM, Unidad Profesional ' Adolfo Lopez Mateos' , Col. Lindavista 07738, D. F. (Mexico)]. e-mail: jacm@nuclear.inin.mx

    2004-07-01

    The obtained results when implementing the technique of tabu search, for to optimize patterns of control bars in a BWR type reactor, using the CM-PRESTO code are presented. The patterns of control bars were obtained for the designs of fuel reloads obtained in a previous work, using the same technique. The obtained results correspond to a cycle of 18 months using 112 fresh fuels enriched at the 3.53 of U-235. The used technique of tabu search, prohibits recently visited movements, in the position that correspond to the axial positions of the control bars, additionally the tiempo{sub t}abu matrix is used for to manage a size of variable tabu list and the objective function is punished with the frequency of the forbidden movements. The obtained patterns of control bars improve the longitude of the cycle with regard to the reference values and they complete the restrictions of safety. (Author)

  20. Competitive interactions and resource partitioning between northern spotted owls and barred owls in western Oregon

    Science.gov (United States)

    Wiens, J. David; Anthony, Robert G.; Forsman, Eric D.

    2014-01-01

    species, accounting for 81% and 49% of total dietary biomass for spotted owls and barred owls, respectively. Mean dietary overlap between pairs of spotted and barred owls in adjacent territories was moderate (42%; range = 28–70%). Barred owls displayed demographic superiority over spotted owls; annual survival probability of spotted owls from known-fate analyses (0.81, SE = 0.05) was lower than that of barred owls (0.92, SE = 0.04), and pairs of barred owls produced an average of 4.4 times more young than pairs of spotted owls over a 3-year period. We found a strong, positive relationship between seasonal (6-month) survival probabilities of both species and the proportion of old (>120 yr) conifer forest within individual home ranges, which suggested that availability of old forest was a potential limiting factor in the competitive relationship between these 2 species. The annual number of young produced by spotted owls increased linearly with increasing distance from a territory center of a pair of barred owls, and all spotted owls that attempted to nest within 1.5 km of a nest used by barred owls failed to successfully produce young. We identified strong associations between the presence of barred owls and the behavior and fitness potential of spotted owls, as shown by changes in movements, habitat use, and reproductive output of spotted owls exposed to different levels of spatial overlap with territorial barred owls. When viewed collectively, our results support the hypothesis that interference competition with barred owls for territorial space can constrain the availability of critical resources required for successful recruitment and reproduction of spotted owls. Availability of old forests and associated prey species appeared to be the most strongly limiting factors in the competitive relationship between these species, indicating that further loss of these conditions can lead to increases in competitive pressure. Our findings have broad implications

  1. Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, B.

    2006-06-27

    The authors present a search for the decay of a B{sup 0} or {bar B}{sup 0} meson to a {bar K}*{sup 0} K{sup 0} or K*{sup 0} {bar K}{sup 0} final state, using a sample of approximately 232 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric energy e{sup +}e{sup -} collider at SLAC. The measured branching fraction is {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) = (0.2{sub -0.8, -0.3}{sup +0.9, +0.1}) x 10{sup -6}. They obtain the following upper limit for the branching fraction at 90% confidence level: {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) < 1.9 x 10{sup -6}. They use our result to constrain the Standard Model prediction for the deviation of the CP asymmetry in B{sup 0} {yields} {phi}K{sup 0} from sin 2{beta}.

  2. Predicting vertical jump height from bar velocity.

    Science.gov (United States)

    García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

    2015-06-01

    The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.

  3. BarLaurean mahdollisuudet saavuttaa Joutsenmerkki

    OpenAIRE

    Järveläinen, Tuomas; Paavola, Salme

    2009-01-01

    Joutsenmerkki on vapaaehtoinen yhteispohjoismainen Ympäristömerkki. Opinnäytetyö on osa kehittämistyötä, jonka tavoitteena on hakea Joutsenmerkintää BarLaurean toiminnalle. Joutsenmerkin anomiseen tähtäävät toimenpiteet on aloitettu keväällä 2009 tekemällä aiheesta alustava toimintasuunnitelma. Opinnäytetyön tavoitteena on soveltaa käytäntöön toimintasuunnitelmassa kuvattuja toimenpiteitä, jotka dokumentoidaan Joutsenmerkkikansioon osana Joutsenmerkki-hakemusta. Opinnäytetyön tavoitteena ...

  4. CP Violation at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Yeche, Christophe; /DSM, DAPNIA, Saclay

    2011-11-15

    We report recent measurements of the three CKM angles of the Unitarity Triangle using about 383 millions b{bar b} pairs collected with the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC. The results of the angles ({beta}, {alpha}, {gamma}) of the unitarity triangle are consistent with Belle results, and with other CKM constraints such as the measurement of {epsilon}{sub K}, the length of the sides of the unitarity triangle determined from the measurements of {Delta}m{sub d}, {Delta}m{sub s}, |V{sub ub}|. This is an impressive confirmation of Standard Model in quark-flavor sector.

  5. Warp evidences in precessing galactic bar models

    OpenAIRE

    Sanchez-Martin, Patricia; Romero-Gomez, Merce; Masdemont, Josep J.

    2016-01-01

    Most galaxies have a warped shape when they are seen from an edge-on point of view. The reason for this curious form is not completely known so far and in this work we apply dynamical system tools to contribute to its explanation. Starting from a simple, but realistic, model formed by a bar and a disc, we study the effect produced by a small misalignment between the angular momentum of the system and its angular velocity. To this end, a precession model is developed and considered, assuming t...

  6. Predicting vertical jump height from bar velocity.

    Science.gov (United States)

    García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

    2015-06-01

    The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance. PMID:25983572

  7. A Distinct Structure Inside the Galactic Bar

    OpenAIRE

    Nishiyama, Shogo; Nagata, Tetsuya; Baba, Daisuke; Haba, Yasuaki; Kadowaki, Ryota; Kato, Daisuke; Kurita, Mikio; Nagashima, Chie; Nagayama, Takahiro; Murai, Yuka; Nakajima, Yasushi; Tamura, Motohide; Nakaya, Hidehiko; Sugitani, Koji; Naoi, Takahiro

    2005-01-01

    We present the result of a near-infrared (J H Ks) survey along the Galactic plane, -10.5deg < l < +10.5deg and b=+1.0deg, with the IRSF 1.4m telescope and the SIRIUS camera. Ks vs. H-Ks color-magnitude diagrams reveal a well-defined population of red clump (RC) stars whose apparent magnitude peak changes continuously along the Galactic plane, from Ks=13.4 at l=-10deg to Ks=12.2 at l=+10deg after dereddening. This variation can be explained by the bar-like structure found in previous studies, ...

  8. The Astrophysics Source Code Library: An Update

    Science.gov (United States)

    Allen, Alice; Nemiroff, R. J.; Shamir, L.; Teuben, P. J.

    2012-01-01

    The Astrophysics Source Code Library (ASCL), founded in 1999, takes an active approach to sharing astrophysical source code. ASCL's editor seeks out both new and old peer-reviewed papers that describe methods or experiments that involve the development or use of source code, and adds entries for the found codes to the library. This approach ensures that source codes are added without requiring authors to actively submit them, resulting in a comprehensive listing that covers a significant number of the astrophysics source codes used in peer-reviewed studies. The ASCL moved to a new location in 2010, and has over 300 codes in it and continues to grow. In 2011, the ASCL (http://asterisk.apod.com/viewforum.php?f=35) has on average added 19 new codes per month; we encourage scientists to submit their codes for inclusion. An advisory committee has been established to provide input and guide the development and expansion of its new site, and a marketing plan has been developed and is being executed. All ASCL source codes have been used to generate results published in or submitted to a refereed journal and are freely available either via a download site or from an identified source. This presentation covers the history of the ASCL and examines the current state and benefits of the ASCL, the means of and requirements for including codes, and outlines its future plans.

  9. Investigating the Nuclear Activity of Barred Spiral Galaxies: The Case of NGC 1672

    Science.gov (United States)

    Jenkins, L. P.; Brandt, W. N.; Colbert, E. J.; Koribalski, B.; Kuntz, K. D.; Levan, A. J.; Ojha, R.; Roberts, T. P.; Ward, M. J.; Zezas, A.

    2011-01-01

    We have performed an X-ray study of the nearby barred spiral galaxy NGC 1672, primarily to ascertain the effect of the bar on its nuclear activity. We use both Chandra and XMM-Newton observations to investigate its X-ray properties, together with supporting high-resolution optical imaging data from the Hubble Space Telescope (HST) infrared imaging from the Spitzer Space Telescope, and Australia Telescope Compact Array ground-based radio data. We detect 28 X-ray sources within the D25 area of the galaxy; many are spatially correlated with star formation in the bar and spiral arms, and two are identified as background galaxies in the HST images. Nine of the X-ray sources are ultraluminous X-ray sources, with the three brightest (LX 5 * 10(exp 39) erg s(exp -1)) located at the ends of the bar. With the spatial resolution of Chandra, we are able to show for the first time that NGC 1672 possesses a hard (1.5) nuclear X-ray source with a 2-10 keV luminosity of 4 * 10(exp 38) erg s(exp -1). This is surrounded by an X-ray-bright circumnuclear star-forming ring, comprised of point sources and hot gas, which dominates the 2-10 keV emission in the central region of the galaxy. The spatially resolved multiwavelength photometry indicates that the nuclear source is a low-luminosity active galactic nucleus (LLAGN), but with star formation activity close to the central black hole. A high-resolution multiwavelength survey is required to fully assess the impact of both large-scale bars and smaller-scale phenomena such as nuclear bars, rings, and nuclear spirals on the fueling of LLAGN.

  10. Containment Code Validation Matrix

    International Nuclear Information System (INIS)

    and references, the synopsis also identifies the availability of the report and data, phenomena covered by the test, type of test (separate effect, combined effect or integral test), covers DBA and/or SA/BDBA conditions, range of key experimental parameters and past code validation/ benchmarks. This CCVM has identified experiments for 93% of the phenomena requiring validation. However, if only experiments suitable for CFD validation are considered, then only about half of the phenomena are covered by this CCVM. It is recommended that this work be reviewed in 5 years time to include new experiments and to attempt to close the identified experiment gaps (phenomena lacking suitable experiments for validation). (authors)

  11. Study of the ρ-bar, β-bar and Λ parameters of a light-water reactor

    International Nuclear Information System (INIS)

    The kinetic and perturbation equations are derived from the time-dependent transport equation. Kinetic equations depend only on the ratios a = ρ-bar/β-bar and b = β-bar/Λ, which are definite, while the reactivity ρ-bar, the delayed neutron fraction (β-bar and the generation time Λ are expressed in terms of an arbitrary function I. The 'static' definitions of these parameters, which reduce kinetic problems to a set of purely term dependent equations, introduce the effective fraction β-bar. One way of determining experimentally the ratio b is presented; it consists in analysing the power transient after a rapid variation of the reactivity, caused by the implosion of an empty glass-bull. A simple interpretation is proposed. The apparatus can be transformed easily into a reactimeter. The value of the effective delayed neutron fraction β-bar has been determined by averaging the reactivity effects of a copper sheet through out the reactor core. Experimental results: b = β-bar/Λ = 129 s-1 and β-bar 795.10-5, have been determined on a light-water moderated, enriched-uranium fuelled reactor. The calculated values of the effectiveness of delayed neutrons γ β-bar/β 1.23 and the generation time Λ 59.10-6s agrees fairly well with the experimental results. (author)

  12. Automated multisyringe stir bar sorptive extraction using robust montmorillonite/epoxy-coated stir bars.

    Science.gov (United States)

    Ghani, Milad; Saraji, Mohammad; Maya, Fernando; Cerdà, Víctor

    2016-05-01

    Herein we present a simple, rapid and low cost strategy for the preparation of robust stir bar coatings based on the combination of montmorillonite with epoxy resin. The composite stir bar was implemented in a novel automated multisyringe stir bar sorptive extraction system (MS-SBSE), and applied to the extraction of four chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol) as model compounds, followed by high performance liquid chromatography-diode array detection. The different experimental parameters of the MS-SBSE, such as sample volume, selection of the desorption solvent, desorption volume, desorption time, sample solution pH, salt effect and extraction time were studied. Under the optimum conditions, the detection limits were between 0.02 and 0.34μgL(-1). Relative standard deviations (RSD) of the method for the analytes at 10μgL(-1) concentration level ranged from 3.5% to 4.1% (as intra-day RSD) and from 3.9% to 4.3% (as inter-day RSD at 50μgL(-1) concentration level). Batch-to-batch reproducibility for three different stir bars was 4.6-5.1%. The enrichment factors were between 30 and 49. In order to investigate the capability of the developed technique for real sample analysis, well water, wastewater and leachates from a solid waste treatment plant were satisfactorily analyzed. PMID:27062720

  13. The LHCb pentaquark as a $\\bar{D}^*\\Sigma_c-\\bar{D}^*\\Sigma_c^*$ molecular state

    CERN Document Server

    Roca, L; Oset, E

    2015-01-01

    We perform a theoretical analysis of the $\\Lambda_b \\to J/\\psi K^- p$ reaction from where a recent LHCb experiment extracts a $\\Lambda(1405)$ contribution in the $K^- p$ spectrum close to threshold and two baryon states of hidden charm in the $J/\\psi\\,p$ spectrum. We recall that baryon states of this type have been theoretically predicted matching the mass, width and $J^P$ of the experiment, concretely some states built up from the $J/\\psi\\, N$, $\\bar D^* \\Lambda_c$, $\\bar D^* \\Sigma_c$, $\\bar D \\Sigma^*_c$ and $\\bar D^* \\Sigma^*_c$ coupled channels. We assume that the observed narrow state around 4450 MeV has this nature and we are able to describe simultaneously the shapes and relative strength of the the $K^- p$ mass distribution close to threshold and the peak of the $J/\\psi\\,p$ distribution, with values of the $J/\\psi\\, p$ coupling to the resonance in line with the theoretical ones. The non trivial matching of many properties gives support to a $J^P=3/2^-$ assignment to this state and to its nature as a ...

  14. Automated multisyringe stir bar sorptive extraction using robust montmorillonite/epoxy-coated stir bars.

    Science.gov (United States)

    Ghani, Milad; Saraji, Mohammad; Maya, Fernando; Cerdà, Víctor

    2016-05-01

    Herein we present a simple, rapid and low cost strategy for the preparation of robust stir bar coatings based on the combination of montmorillonite with epoxy resin. The composite stir bar was implemented in a novel automated multisyringe stir bar sorptive extraction system (MS-SBSE), and applied to the extraction of four chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol) as model compounds, followed by high performance liquid chromatography-diode array detection. The different experimental parameters of the MS-SBSE, such as sample volume, selection of the desorption solvent, desorption volume, desorption time, sample solution pH, salt effect and extraction time were studied. Under the optimum conditions, the detection limits were between 0.02 and 0.34μgL(-1). Relative standard deviations (RSD) of the method for the analytes at 10μgL(-1) concentration level ranged from 3.5% to 4.1% (as intra-day RSD) and from 3.9% to 4.3% (as inter-day RSD at 50μgL(-1) concentration level). Batch-to-batch reproducibility for three different stir bars was 4.6-5.1%. The enrichment factors were between 30 and 49. In order to investigate the capability of the developed technique for real sample analysis, well water, wastewater and leachates from a solid waste treatment plant were satisfactorily analyzed.

  15. Unconditional Continuous Variable Dense Coding

    CERN Document Server

    Ralph, T C

    2002-01-01

    We investigate the conditions under which unconditional dense coding can be achieved using continuous variable entanglement. We consider the effect of entanglement impurity and detector efficiency and discuss experimental verification. We conclude that the requirements for a strong demonstration are not as stringent as previously thought and are within the reach of present technology.

  16. Shepherding Tidal Debris with the Galactic Bar: The Ophiuchus Stream

    CERN Document Server

    Hattori, Kohei; Sanders, Jason L

    2015-01-01

    The dynamics of stellar streams in rotating barred potentials is explained for the first time. Naturally, neighbouring stream stars reach pericentre at slightly different times. In the presence of a rotating bar, these neighbouring stream stars experience different bar orientations during pericentric passage and hence each star receives a different torque from the bar. These differing torques reshape the angular momentum and energy distribution of stars in the stream, which in turn changes the growth rate of the stream. For a progenitor orbiting in the same sense as the bar's rotation and satisfying a resonance condition, the resultant stream can be substantially shorter or longer than expected, depending on whether the pericentric passages of the progenitor occur along the bar's minor or major axis respectively. We present a full discussion of this phenomenon focusing mainly on streams confined to the Galactic plane. In stark contrast with the evolution in static potentials, which give rise to streams that g...

  17. Bar pattern speed evolution over the last 7 Gyr

    Science.gov (United States)

    Pérez, I.; Aguerri, J. A. L.; Méndez-Abreu, J.

    2012-04-01

    Context. The tumbling pattern of a bar is the main parameter characterising its dynamics. From numerical simulations, its evolution since bar formation is tightly linked to the dark halo in which the bar is formed through dynamical friction and angular momentum exchange. Observational measurements of the bar pattern speed with redshift can restrict models of galaxy formation and bar evolution. Aims: We aim to determine for the first time the bar pattern speed evolution with redshift based on morphological measurements. Methods: We have selected a sample of 44 low-inclination ringed galaxies from the SDSS and COSMOS surveys covering the redshift range 0 electronic form at http://www.aanda.orgBased on observations made with the NASA/ESA Hubble Space Telescope, obtained from the data archive at the Space Telescope Science Institute. STScI is operated by the Association of Universities for Research in Astronomy, Inc. under NASA contract NAS 5-26555.

  18. Uncertainties in the Deprojection of the Observed Bar Properties

    CERN Document Server

    Zou, Yanfei; Li, Zhao-Yu

    2014-01-01

    In observations, it is important to deproject the two fundamental quantities characterizing a bar, i.e., its length ($a$) and ellipticity ($e$), to face-on values before any careful analyses. However, systematic estimation on the uncertainties of the commonly used deprojection methods is still lacking. Simulated galaxies are well suited in this study. We project two simulated barred galaxies onto a 2D plane with different bar orientations and disk inclination angles ($i$). Bar properties are measured and deprojected with the popular deprojection methods in the literature. Generally speaking, deprojection uncertainties increase with increasing $i$. All the deprojection methods behave badly when $i$ is larger than $60^\\circ$, due to vertical thickness of the bar. Thus, future statistical studies of barred galaxies should exclude galaxies more inclined than $60^\\circ$. At moderate inclination angles ($i\\leq60^\\circ$), 2D deprojection methods (analytical and image stretching) and Fourier-based methods (Fourier de...

  19. Anti-seismic behavior of HRB400 reinforced steel bars

    Institute of Scientific and Technical Information of China (English)

    QIN Bin; SHENG Guang-min; GONG Shi-hong

    2005-01-01

    The properties of anti-seismic HRB400 steel bars with 25 mm diameter were systematically investigated. The results showed that the properties of the HRB400 reinforced steel bars had been greatly enhanced comparing with HRB335 steel bars, i.e. coordination of strength and ductility, strain-aging sensibility, low temperature impact toughness, weld ability and high strain low cycle fatigue. The ductile-brittle transit temperatures of hot-rolled and strain-aged steel bars were evaluated as -17℃ and-8℃ respectively, and the low temperature impact toughness of HRB400 steel bars remains to be improved. Transmission electron microscopy (TEM) and electron diffraction showed little vanadium existed in ferrite as VN, most of which existed in pearlite as alloy cementite which resulted in the declination of impact toughness. Methods were suggested to improve the anti-seismic properties of steel bars.

  20. Asymptotic Orbits in Barred Spiral Galaxies

    CERN Document Server

    Harsoula, Maria; Contopoulos, George

    2010-01-01

    We study the formation of the spiral structure of barred spiral galaxies, using an $N$-body model. The evolution of this $N$-body model in the adiabatic approximation maintains a strong spiral pattern for more than 10 bar rotations. We find that this longevity of the spiral arms is mainly due to the phenomenon of stickiness of chaotic orbits close to the unstable asymptotic manifolds originated from the main unstable periodic orbits, both inside and outside corotation. The stickiness along the manifolds corresponding to different energy levels supports parts of the spiral structure. The loci of the disc velocity minima (where the particles spend most of their time, in the configuration space) reveal the density maxima and therefore the main morphological structures of the system. We study the relation of these loci with those of the apocentres and pericentres at different energy levels. The diffusion of the sticky chaotic orbits outwards is slow and depends on the initial conditions and the corresponding Jaco...

  1. Barómetro industrial LEON 50

    Directory of Open Access Journals (Sweden)

    Javier Álvarez Martínez

    2005-12-01

    Full Text Available El Barómetro indusrial LEON 50 es un trabajo de investigación que tiene como objetivo esencial identificar características patrimoniales, financieras y económicas de una muestra de empresas que actúan dentro de la industria leonesa. El soporte de este estudio empírico es la información contable anual auditada que depositan en el Registro Mercantil las empresas integrantes de la muestra, recogida básicamente en el balance de situación, la cuenta de pérdidas y ganacias y el cuadro de finaciación referidos al bienio 2001-02. En esencia, el Barómetro Industrial LEON 50 pretende ser un avance en el análisis, diagnóstico y mejor conocimiento de la industria regional, aportando una visión actualizada sobre estrategias y pautas de actuación empresarial que serán objeto de observación en períodos

  2. bar{B}_{d,s} → D^{*}_{d,s} V and bar{B}_{d,s}^* → D_{d,s} V decays in QCD factorization and possible puzzles

    Science.gov (United States)

    Chang, Qin; Chen, Ling-Xin; Zhang, Yun-Yun; Sun, Jun-Feng; Yang, Yue-Ling

    2016-10-01

    Motivated by the rapid development of heavy-flavor experiments, phenomenological studies of nonleptonic bar{B}_{d,s} → D^{*}_{d,s} V and bar{B}_{d,s}^* → D_{d,s} V (V=ρ ,K^*) decays are performed within the framework of QCD factorization. Relative to the previous work, the QCD corrections to the transverse amplitudes are evaluated at next-to-leading order. The theoretical predictions of the observables are updated. For the measured bar{B}_{d,s} → D^{*}_{d,s} V decays, the tensions between theoretical results and experimental measurements, i.e. the "R_{ds}V puzzle" and "D^{*} V (or R_{V/ℓ bar{ν }_ℓ }) puzzle", are presented after detailed analyses. For the bar{B}_{d,s}^* → D_{d,s} V decays, they have relatively large branching fractions of the order ≳ O(10^{-9}) and are in the scope of Belle-II and LHCb experiments. Moreover, they also provide a way to crosscheck the possible puzzles mentioned above through the similar ratios R_{ds}^' V} and R_{V/ℓ bar{ν }_ℓ }^' }. More refined experimental measurements and theoretical efforts are required to confirm or refute such two anomalies.

  3. Exact Regenerating Codes for Distributed Storage

    CERN Document Server

    V., Rashmi K; Kumar, P Vijay; Ramachandran, Kannan

    2009-01-01

    Erasure coding techniques are used to increase the reliability of distributed storage systems while minimizing storage overhead. The bandwidth required to repair the system after a node failure also plays a crucial role in the system performance. In [1] authors have shown that a tradeoff exists between storage and repair bandwidth. They also have introduced the scheme of regenerating codes which meet this tradeoff. In this paper, a scheme of Exact Regenerating Codes is introduced, which are regenerating codes with an additional property of regenerating back the same node upon failure. For the minimum bandwidth point, which is suitable for applications like distributed mail servers, explicit construction for exact regenerating codes is provided. A subspace approach is provided, using which the necessary and sufficient conditions for a linear code to be an exact regenerating code are derived. This leads to the uniqueness of our construction. For the minimum storage point which suits applications such as storage...

  4. Polyphase alternating codes

    CERN Document Server

    Markkanen, Markku

    2007-01-01

    This work introduces a method for constructing polyphase alternating codes in which the length of a code transmission cycle can be $p^m$ or $p-1$, where $p$ is a prime number and $m$ is a positive integer. The relevant properties leading to the construction alternating codes and the algorithm for generating alternating codes is described. Examples of all practical and some not that practical polyphase code lengths are given.

  5. Constructing quantum codes

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Quantum error correcting codes are indispensable for quantum information processing and quantum computation.In 1995 and 1996,Shor and Steane gave first several examples of quantum codes from classical error correcting codes.The construction of efficient quantum codes is now an active multi-discipline research field.In this paper we review the known several constructions of quantum codes and present some examples.

  6. Interaction of Bar Morphology and Riparian Vegetation in Gravel-Bed Rivers

    Science.gov (United States)

    Francalanci, S.; Bertoldi, W.; Siviglia, A.; Solari, L.; Toffolon, M.; Vetsch, D.

    2013-12-01

    Gravel-bed rivers are often characterized by complex bed topography, including single- and multiple-row alternate bars, bed undulations associated with channel curvature, riffle and pool sequences, presence of riparian vegetation in the floodplain, etc. The interaction of these features results in different morphologies with complex patterns and dynamics. The present work investigates the effect of the riparian vegetation on the bar dynamics, in particular it is investigated how the vegetation, which grows during the dry season on the bars, can alter the topographic patterns evolution during flood conditions. Performing two-dimensional numerical simulations we try to answer to the following research questions: which is the interaction of vegetation with bar morphology? which are the changes in sediment discharge and flow resistance, at cross-sectional and reach scale? Which are the changes in distribution of emerged and submerged areas, and potential feedbacks for vegetation growth? Which is the effect of vegetation on bar wave-length? The code BASEMENT (Faeh et al., 2010) has been used for performing the numerical runs. It has been properly modified in order to deal with the numerical description of the vegetation. The vegetation was allowed to grow during the dry season on the top of dry emergent areas, and the vertical distribution of vegetation in equilibrium condition was modeled as a function of the bed elevation using a simple analytical formulation, following Marani et al (2013). Then, during the flood events we assume that the vegetation distribution does not change, and that it can only be uprooted if the bed is eroded.The flow resistance was divided into a resistance exerted by the soil and a resistance exerted by the plants (Crosato and Saleh, 2010; Li and Millar, 2011); in this way it was possible to reproduce both the decrease in bed shear stress, reducing the sediment transport capacity of the flow within the plants, and the increase in hydraulic

  7. STABILIZER BARS – CALCULATIONS, CONSTRUCTION AND PRODUCTION METHODS

    Directory of Open Access Journals (Sweden)

    Adam Marek WITTEK

    2015-06-01

    Full Text Available The article outlines the calculation and production methods for stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction and manufacturing of stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  8. Fault bars and the risk of feather damage in cranes

    OpenAIRE

    Jovani, Roger; Blas, Julio; Stoffel, M.J.; Bortolotti, L.E.; Bortolotti, Gary R.

    2010-01-01

    Fault bars are translucent areas across feathers grown under stressful conditions. They are ubiquitous across avian species and feather tracts. Because fault bars weaken feather structure and can lead to feather breakage, they may reduce flight performance and lower fitness. Therefore, natural selection might prime mechan- isms aimed at reducing the cost of fault bars, penalizing their occurrence in those feathers more relevant for flight. Here, we tested one prediction of this ‘fault...

  9. Principles and Practices of Bar and Beverage Management

    OpenAIRE

    Murphy, James Peter

    2013-01-01

    Principles and Practices of Bar and Beverage Management is a comprehensive text and resource book designed to explain the latest developments and new complexities of managing modern bars - be they stand alone or part of larger institutions such as hotels and resorts. Consumer expectations have changed, and a bar today must deliver an integrated social experience in a safe modern environment, which also offers the latest products and services in a professional and engaging fashion. Against ...

  10. The structure of the Milky Way's bar outside the bulge

    Science.gov (United States)

    Wegg, Christopher; Gerhard, Ortwin; Portail, Matthieu

    2015-07-01

    While it is incontrovertible that the inner Galaxy contains a bar, its structure near the Galactic plane has remained uncertain, where extinction from intervening dust is greatest. We investigate here the Galactic bar outside the bulge, the long bar, using red clump giant (RCG) stars from United Kingdom Infrared Deep Sky Survey, Two Micron All Sky Survey, Vista Variables in the Via Lactea and Galactic Legacy Infrared Midplane Survey Extraordinaire. We match and combine these surveys to investigate a wide area in latitude and longitude, |b| ≤ 9° and |l| ≤ 40°. We find (i) the bar extends to l ˜ 25° at |b| ˜ 5° from the Galactic plane, and to l ˜ 30° at lower latitudes; (ii) the long bar has an angle to the line-of-sight in the range (28°-33°), consistent with studies of the bulge at |l| thin bar component reminiscent of the old thin disc near the Sun, and a ˜45 pc superthin bar components which exist predominantly towards the bar end; (v) constructing parametric models for the red clump magnitude distributions, we find a bar half-length of 5.0 ± 0.2 kpc for the two-component bar, and 4.6 ± 0.3 kpc for the thin bar component alone. We conclude that the Milky Way contains a central box/peanut bulge which is the vertical extension of a longer, flatter bar, similar as seen in both external galaxies and N-body models.

  11. Washing with contaminated bar soap is unlikely to transfer bacteria.

    OpenAIRE

    Heinze, J. E.; Yackovich, F.

    1988-01-01

    Recent reports of the isolation of microorganisms from used soap bars have raised the concern that bacteria may be transferred from contaminated soap bars during handwashing. Since only one study addressing this question has been published, we developed an additional procedure to test this concern. In our new method prewashed and softened commercial deodorant soap bars (0.8% triclocarban) not active against Gram-negative bacteria were inoculated with Escherichia coli and Pseudomonas aeruginos...

  12. Kolkata Restaurant Problem as a Generalised El Farol Bar Problem

    Science.gov (United States)

    Chakrabarti, Bikas K.

    Generalisation of the El Farol bar problem to that of many bars here leads to the Kolkata restaurant problem, where the decision to go to any restaurant or not is much simpler (depending on the previous experience of course, as in the El Farol bar problem). This generalised problem can be exactly analysed in some limiting cases discussed here. The fluctuation in the restaurant service can be shown to have precisely an inverse cubic behavior, as widely seen in the stock market fluctuations.

  13. Preliminary systems-interaction results from the Digraph Matrix Analysis of the Watts Bar Nuclear Power Plant safety-injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Champney, J.M.; Alesso, H.P.

    1983-06-01

    This report provides preliminary results generated by a Digraph Matrix Analysis (DMA) for a Systems Interaction analysis performed on the Safety Injection System of the Tennessee Valley Authority Watts Bar Nuclear Power Plant. An overview of DMA is provided along with a brief description of the computer codes used in DMA.

  14. Comparing photometric results of real and N-body bars

    CERN Document Server

    Athanassoula, E; Carrasco, L; Bosma, A; De Souza, R E; Recillas, E

    2009-01-01

    We compare the results of the photometrical analysis of barred galaxies with those of a similar analysis from N-body simulations. The photometry is for a sample of nine barred galaxies observed in the J and Ks bands with the CANICA near infrared (NIR) camera at the 2.1-m telescope of the Observatorio Astrofisico Guillermo Haro (OAGH) in Cananea, Sonora, Mexico. The comparison includes radial ellipticity profiles and surface brightness (density for the N-body galaxies) profiles along the bar major and minor axes. We find very good agreement, arguing that the exchange of angular momentum within the galaxy plays a determinant role in the evolution of barred galaxies.

  15. Stability of cassava flour-based food bars

    Directory of Open Access Journals (Sweden)

    Erica Caroline da Silva

    2013-03-01

    Full Text Available The consumption of Brazilian cassava has been reduced due to a lack of adjustment to the modern lifestyle. To reverse this trend, new products could be developed specifically targeted to high-value niche markets. Cereal bars stand out as fast food high in nutritional value. A bar formula mimicking cereal bars was prepared using a mixture of Brazilian cassava flour, hydrogenated vegetable fat, dried bananas, ground cashew nuts, and glucose syrup. After being pressed, the bars were dried for 1 hour at 65 °C, packaged in films, and stored under ambient conditions. Its stability was continuously monitored for 210 days in order to ensure its safety and enable its introduction to the market. Texture loss was observed in the packed bars after 90 days of storage, but the sensory characteristics allowed the testers to perceive this tendency after only 30 days of storage. However, chemical, physical, and microbial analyses confirmed that the bars were safe for consumption for 180 days. The results showed that a 45 g cassava flour-based bar enriched with nuts and dried fruits can meet 6% of the recommended daily fiber intake with a caloric value between that of the common cereal bar and that of an energy bar. Adapting the formula with ingredients (fruits, nuts from different regions of Brazil may add value to this traditional product as a fast food.

  16. Musculoskeletal demands of progressions for the longswing on high bar.

    Science.gov (United States)

    Irwin, Gareth; Kerwin, David G

    2007-09-01

    Kinetic analyses of the chalked bar longswing on high bar and its associated progressions were used to explain musculoskeletal contributions during the performance of these skills. Data on four international male gymnasts performing three series of chalked bar longswings and eight progressions were recorded. Customized body segment inertia parameters, two-dimensional kinematics (50 Hz), and bar forces (1000 Hz) were used as input to inverse dynamic modelling. The analysis focused on the relative contributions of the knees, hips, and shoulders with root mean squared differences between the chalked bar longswing and the progressions being used to rank the progressions. Seventy per cent of the total work occurred between 200 degrees and 240 degrees of angular rotation in the longswing, 67% of which was contributed by the shoulders. The shoulders were also dominant in all progressions, with the largest such contribution occurring in the looped bar longswing with "no action". The least similar progression was the looped bar pendulum swing, while the most similar was the chalked bar bent knee longswing. This study provides a useful means for ranking progressions based on their kinetic similarity to the chalked bar longswing and builds on earlier research in identifying that progressions can be classified into those similar in physical demand (kinetics) and those similar in geometry (kinematics).

  17. Strain analysis of nonlocal viscoelastic Kelvin bar in tension

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xue-chuan; LEI Yong-jun; ZHOU Jian-ping

    2008-01-01

    Based on viscoelastic Kelvin model and nonlocal relationship of strain and stress, a nonlocal constitutive relationship of viscoelasticity is obtained and the strain response of a bar in tension is studied. By transforming governing equation of the strain analysis into Volterra integration form and by choosing a symmetric exponential form of kernel function and adapting Neumann series, the closed-form solution of strain field of the bar is obtained. The creep process of the bar is presented. When time approaches infinite, the strain of bar is equal to the one of nonlocal elasticity.

  18. Shanghai’s Bars:Urban Romance and Sadness

    Institute of Scientific and Technical Information of China (English)

    LiuSha

    2002-01-01

    When speaking of Shanghai’s bars, what comes to people’s minds first must be Hengshan Street, a road known for its variety of bars. For many people, Hengshan Street is a landmark. On this street, bars in bold and unrestrained styles appeal to visitors. In fact, the whole street is a large open bar: the hurly-burly of "Hello" permeates every corner of the street; the resonant singing of "Rainbow Potato" echoes in the night sky; the rock’n roll of "Full House" fascinates passers-by with the wildness of John Lennon; even

  19. Measurement of the B0-bar Lifetime and the B0B0-bar Oscillation Frequency Using Partially Reconstructed B0-bar to D*+ l- nu-bar Decays

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, B.; Barate, R.; Boutigny, D.; Couderc, F.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Tisserand, V.; Zghiche, A.; /Annecy, LAPP; Grauges, E.; /Barcelona, IFAE; Palano, A.; Pappagallo, M.; Pompili, A.; /Bari U. /INFN, Bari; Chen, J.C.; Qi, N.D.; Rong, G.; Wang, P.; Zhu, Y.S.; /Beijing, Inst. High Energy Phys.; Eigen, G.; Ofte, I.; Stugu, B.

    2005-07-27

    The authors present a simultaneous measurement of the {bar B}{sup 0} lifetime {tau}{sub B{sup 0}} and B{sup 0}{bar B}{sup 0} oscillation frequency {Delta}m{sub d}. We use a sample of about 50,000 partially reconstructed {bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}} decays identified with the BABAR detector at the PEP-II e{sup +}e{sup -} storage ring at SLAC. The flavor of the other B meson in the event is determined from the charge of another high-momentum lepton.

  20. Multipacting Analysis of the Superconducting Parallel-bar Cavity

    Energy Technology Data Exchange (ETDEWEB)

    S.U. De Silva, J.R. Delayen,

    2011-03-01

    The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. Multipacting can be a limiting factor to the performance of in any superconducting structure. In the parallel-bar cavity the main contribution to the deflection is due to the transverse deflecting voltage, between the parallel bars, making the design potentially prone to multipacting. This paper presents the results of analytical calculations and numerical simulations of multipacting in the parallel-bar cavity with resonant voltage, impact energies and corresponding particle trajectories.

  1. Deployment and interoperability of legacy code services

    OpenAIRE

    Zetuny, Y.; Kecskeméti, Gábor; Kiss, T; Sipos, Gergely; Kacsuk, Péter; Terstyanszky, G.; Winter, S.

    2005-01-01

    The Grid Execution Management for Legacy Code Architecture (GEMLCA) enables exposing legacy applications as Grid services without re-engineering the code, or even requiring access to the source files. The integration of current GT3 and GT4 based GEMLCA implementations with the P- GRADE Grid portal allows the creation, execution and visualisation of complex Grid workflows composed of legacy and non-legacy components. However, the deployment of legacy codes and mapping their execution to Grid r...

  2. The Tubulation Activity of a Fission Yeast F-BAR Protein Is Dispensable for Its Function in Cytokinesis

    Directory of Open Access Journals (Sweden)

    Nathan A. McDonald

    2016-01-01

    Full Text Available F-BAR proteins link cellular membranes to the actin cytoskeleton in many biological processes. Here we investigated the function of the Schizosaccharomyces pombe Imp2 F-BAR domain in cytokinesis and find that it is critical for Imp2’s role in contractile ring constriction and disassembly. To understand mechanistically how the F-BAR domain functions, we determined its structure, elucidated how it interacts with membranes, and identified an interaction between dimers that allows helical oligomerization and membrane tubulation. Using mutations that block either membrane binding or tubulation, we find that membrane binding is required for Imp2’s cytokinetic function but that oligomerization and tubulation, activities often deemed central to F-BAR protein function, are dispensable. Accordingly, F-BARs that do not have the capacity to tubulate membranes functionally substitute for the Imp2 F-BAR, establishing that its major role is as a cell-cycle-regulated bridge between the membrane and Imp2 protein partners, rather than as a driver of membrane curvature.

  3. The Quark Flavor Violating Higgs Decay $h \\rightarrow \\bar b s + b \\bar s$ in the MSSM

    CERN Document Server

    Gómez, M E; Rehman, M

    2015-01-01

    We study the quark flavor violating Higgs-boson decay $h \\rightarrow \\bar b s + b \\bar s$ in the Minimal Supersymmetric Standard Model (MSSM). The decay is analyzed first in a model independent, and in a second step in the minimal flavor violationg (MFV) Constrained MSSM. The experimental constraints from $B$-Physics observables (BPO) and electroweak precision observables (EWPO) are also calculated and imposed on the parameter space. It is shown that in some cases the EWPO restrict the flavor violating parameter space stronger than the BPO. In the model independent analysis values of ${\\cal O}(10^{-4})$ can be found for ${\\rm BR}(h \\rightarrow \\bar b s + b \\bar s)$. In the MFV CMSSM such results can only be obtained in very restricted parts of the parameter space. The results show that it is not excluded to observe the decay $h \\rightarrow \\bar b s + b \\bar s$ in the MSSM at future $e^+e^-$ colliders.

  4. Kondo effect of $\\bar{D}_{s}$ and $\\bar{D}_{s}^{\\ast}$ mesons in nuclear matter

    CERN Document Server

    Yasui, Shigehiro

    2016-01-01

    We study the Kondo effect for $\\bar{D}_{s}$ and $\\bar{D}_{s}^{\\ast}$ mesons as impurity particles in nuclear matter. The spin-exchange interaction between the $\\bar{D}_{s}$ or $\\bar{D}_{s}^{\\ast}$ meson and the nucleon induces the enhancement of the effective coupling in the low-energy scattering in the infrared region, whose scale of singularity is given by the Kondo scale. We investigate the Kondo scale in the renormalization group equation at nucleon one-loop level. We furthermore study the ground state with the Kondo effect in the mean-field approach, and present that the Kondo scale is related to the mixing strength between the $\\bar{D}_{s}$ or $\\bar{D}_{s}^{\\ast}$ meson and the nucleon in nuclear matter. We show the spectral function of the impurity when the Kondo effect occurs.

  5. New strategies of reloads design and models of control bars in boiling water reactors

    International Nuclear Information System (INIS)

    In this work the results obtained when analyzing new strategies in the reload designs of nuclear fuel and models of control bars, for boiling water reactors are presented. The idea is to analyze the behaviour of the reactor during an operation cycle, when the heuristic rules are not used (commonly used by expert engineers in both designs). Specifically was analyzed the rule of low leak and the load strategy Control Cell Core for the design of a fuel reload. In a same way was analyzed the rule of prohibiting the use of the intermediate positions in the control bars, as well as the construction of bar models based on load strategies type Control Cell Core. In the first analysis a balance and transition cycle were used. For the second analysis only a transition cycle was used, firstly with the reloads designed in the first analysis and later on with reloads built by other methods. For the simulation of the different configurations proposed in both cases, was used the code Simulate-3. To obtain the designs in both studies, the heuristic techniques or neural networks and taboo search were used. The obtained results show that it can be omitted of some rules used in the ambit for the mentioned designs and even so to obtain good results. To carry out this investigation was used Dell work station under Li nux platform. (Author)

  6. Turbo Codes Extended with Outer BCH Code

    DEFF Research Database (Denmark)

    Andersen, Jakob Dahl

    1996-01-01

    The "error floor" observed in several simulations with the turbo codes is verified by calculation of an upper bound to the bit error rate for the ensemble of all interleavers. Also an easy way to calculate the weight enumerator used in this bound is presented. An extended coding scheme is proposed...

  7. Probe $\\Lambda - \\bar{\\Lambda}$ oscillation in $J/\\psi \\rightarrow \\Lambda\\,\\bar\\Lambda$ decay at BES-III

    OpenAIRE

    Kang, X. W.; H.B. Li; Lu, G. R.

    2010-01-01

    We discuss the possible searching for the oscillation by coherent $\\Lambda\\bar{\\Lambda}$ production in $J/\\psi \\rightarrow \\Lambda \\bar{\\Lambda}$ decay process. The sensitivity of measurement of $\\Lambda - \\bar{\\Lambda}$ oscillation in the external field at BES-III experiment is considered. These considerations indicate an alternative way to probe the $\\Delta B =2$ amplitude in addition to neutron oscillation experiments. Both coherent and time-dependent information can be used to extract $\\L...

  8. Study of J/psi -> p(p)over-bar and J/psi -> n(n)over-bar

    NARCIS (Netherlands)

    Ablikim, M.; Achasov, M. N.; Ambrose, D. J.; An, F. F.; An, Q.; An, Z. H.; Bai, J. Z.; Ban, Y.; Becker, J.; Berger, N.; Bertani, M.; Bian, J. M.; Boger, E.; Bondarenko, O.; Boyko, I.; Briere, R. A.; Bytev, V.; Cai, X.; Calcaterra, A.; Cao, G. F.; Chang, J. F.; Chelkov, G.; Chen, G.; Chen, H. S.; Chen, J. C.; Chen, M. L.; Chen, S. J.; Chen, Y.; Chen, Y. B.; Cheng, H. P.; Chu, Y. P.; Cronin-Hennessy, D.; Dai, H. L.; Dai, J. P.; Dedovich, D.; Deng, Z. Y.; Denig, A.; Denysenko, I.; Destefanis, M.; Ding, W. M.; Ding, Y.; Dong, L. Y.; Dong, M. Y.; Du, S. X.; Fang, J.; Fang, S. S.; Fava, L.; Feldbauer, F.; Feng, C. Q.; Ferroli, R. B.; Fu, C. D.; Fu, J. L.; Gao, Y.; Geng, C.; Goetzen, K.; Gong, W. X.; Gradl, W.; Greco, M.; Gu, M. H.; Gu, Y. T.; Guan, Y. H.; Guo, A. Q.; Guo, L. B.; Guo, Y. P.; Han, Y. L.; Hao, X. Q.; Harris, F. A.; He, K. L.; He, M.; He, Z. Y.; Held, T.; Heng, Y. K.; Hou, Z. L.; Hu, H. M.; Hu, J. F.; Hu, T.; Huang, B.; Huang, G. M.; Huang, J. S.; Huang, X. T.; Huang, Y. P.; Hussain, T.; Ji, C. S.; Ji, Q.; Ji, X. B.; Ji, X. L.; Jia, L. K.; Jiang, L. L.; Jiang, X. S.; Jiao, J. B.; Jiao, Z.; Jin, D. P.; Jin, S.; Jing, F. F.; Kalantar-Nayestanaki, N.; Kavatsyuk, M.; Kuehn, W.; Lai, W.; Lange, J. S.; Leung, J. K. C.; Li, C. H.; Li, Cheng; Li, Cui; Li, D. M.; Li, F.; Li, G.; Li, H. B.; Li, J. C.; Li, K.; Li, Lei; Li, N. B.; Li, Q. J.; Li, S. L.; Li, W. D.; Li, W. G.; Li, X. L.; Li, X. N.; Li, X. Q.; Li, X. R.; Li, Z. B.; Liang, H.; Liang, Y. F.; Liang, Y. T.; Liao, G. R.; Liao, X. T.; Liu, B. J.; Liu, B. J.; Liu, C. L.; Liu, C. X.; Liu, C. Y.; Liu, F. H.; Liu, Fang; Liu, Feng; Liu, H.; Liu, H. B.; Liu, H. H.; Liu, H. M.; Liu, H. W.; Liu, J. P.; Liu, K. Y.; Liu, Kai; Liu, Kun; Liu, P. L.; Liu, S. B.; Liu, X.; Liu, X. H.; Liu, Y.; Liu, Y. B.; Liu, Z. A.; Liu, Zhiqiang; Liu, Zhiqing; Loehner, H.; Lu, G. R.; Lu, H. J.; Lu, J. G.; Lu, Q. W.; Lu, X. R.; Lu, Y. P.; Luo, C. L.; Luo, M. X.; Luo, T.; Luo, X. L.; Lv, M.; Ma, C. L.; Ma, F. C.; Ma, H. L.; Ma, Q. M.; Ma, S.; Ma, T.; Ma, X. Y.; Ma, Y.; Maas, F. E.; Maggiora, M.; Malik, Q. A.; Mao, H.; Mao, Y. J.; Mao, Z. P.; Messchendorp, J. G.; Min, J.; Min, T. J.; Mitchell, R. E.; Mo, X. H.; Morales, C. Morales; Motzko, C.; Muchnoi, N. Yu.; Nefedov, Y.; Nicholson, C.; Nikolaev, I. B.; Ning, Z.; Olsen, S. L.; Ouyang, Q.; Pacetti, S.; Park, J. W.; Pelizaeus, M.; Peters, K.; Ping, J. L.; Ping, R. G.; Poling, R.; Prencipe, E.; Pun, C. S. J.; Qi, M.; Qian, S.; Qiao, C. F.; Qin, X. S.; Qin, Y.; Qin, Z. H.; Qiu, J. F.; Rashid, K. H.; Rong, G.; Ruan, X. D.; Sarantsev, A.; Schulze, J.; Shao, M.; Shen, C. P.; Shen, X. Y.; Sheng, H. Y.; Shepherd, M. R.; Song, X. Y.; Spataro, S.; Spruck, B.; Sun, D. H.; Sun, G. X.; Sun, J. F.; Sun, S. S.; Sun, X. D.; Sun, Y. J.; Sun, Y. Z.; Sun, Z. J.; Sun, Z. T.; Tang, C. J.; Tang, X.; Thorndike, E. H.; Tian, H. L.; Toth, D.; Ullrich, M.; Varner, G. S.; Wang, B.; Wang, B. Q.; Wang, K.; Wang, L. L.; Wang, L. S.; Wang, M.; Wang, P.; Wang, P. L.; Wang, Q.; Wang, Q. J.; Wang, S. G.; Wang, X. F.; Wang, X. L.; Wang, Y. D.; Wang, Y. F.; Wang, Y. Q.; Wang, Z.; Wang, Z. G.; Wang, Z. Y.; Wei, D. H.; Weidenkaff, P.; Wen, Q. G.; Wen, S. P.; Werner, M.; Wiedner, U.; Wu, L. H.; Wu, N.; Wu, S. X.; Wu, W.; Wu, Z.; Xia, L. G.; Xiao, Z. J.; Xie, Y. G.; Xiu, Q. L.; Xu, G. F.; Xu, G. M.; Xu, H.; Xu, Q. J.; Xu, X. P.; Xu, Y.; Xu, Z. R.; Xue, F.; Xue, Z.; Yan, L.; Yan, W. B.; Yan, Y. H.; Yang, H. X.; Yang, T.; Yang, Y.; Yang, Y. X.; Ye, H.; Ye, M.; Ye, M. H.; Yu, B. X.; Yu, C. X.; Yu, J. S.; Yu, S. P.; Yuan, C. Z.; Yuan, W. L.; Yuan, Y.; Zafar, A. A.; Zallo, A.; Zeng, Y.; Zhang, B. X.; Zhang, B. Y.; Zhang, C. C.; Zhang, D. H.; Zhang, H. H.; Zhang, H. Y.; Zhang, J.; Zhang, J. G.; Zhang, J. Q.; Zhang, J. W.; Zhang, J. Y.; Zhang, J. Z.; Zhang, L.; Zhang, S. H.; Zhang, T. R.; Zhang, X. J.; Zhang, X. Y.; Zhang, Y.; Zhang, Y. H.; Zhang, Y. S.; Zhang, Z. P.; Zhang, Z. Y.; Zhao, G.; Zhao, H. S.; Zhao, J. W.; Zhao, K. X.; Zhao, Lei; Zhao, Ling; Zhao, M. G.; Zhao, Q.; Zhao, S. J.; Zhao, T. C.; Zhao, X. H.; Zhao, Y. B.; Zhao, Z. G.; Zhemchugov, A.; Zheng, B.; Zheng, J. P.; Zheng, Y. H.; Zheng, Z. P.; Zhong, B.; Zhong, J.; Zhou, L.; Zhou, X. K.; Zhou, X. R.; Zhu, C.; Zhu, K.; Zhu, K. J.; Zhu, S. H.; Zhu, X. L.; Zhu, X. W.; Zhu, Y. M.; Zhu, Y. S.; Zhu, Z. A.; Zhuang, J.; Zou, B. S.; Zou, J. H.; Zuo, J. X.

    2012-01-01

    The decays J/psi -> p (p) over bar and J/psi -> n (n) over bar have been investigated with a sample of 225.2 x 10(6) J/psi events collected with the BESIII detector at the BEPCII e(+)e(-) collider. The branching fractions are determined to be B(J/psi -> p (p) over bar) = (2.112 +/- 0.004 +/- 0.031 x

  9. Nonbinary quantum codes

    CERN Document Server

    Rains, E M

    1997-01-01

    We present several results on quantum codes over general alphabets (that is, in which the fundamental units may have more than 2 states). In particular, we consider codes derived from finite symplectic geometry assumed to have additional global symmetries. From this standpoint, the analogues of Calderbank-Shor-Steane codes and of GF(4)-linear codes turn out to be special cases of the same construction. This allows us to construct families of quantum codes from certain codes over number fields; in particular, we get analogues of quadratic residue codes, including a single-error correcting code encoding one letter in five, for any alphabet size. We also consider the problem of fault-tolerant computation through such codes, generalizing ideas of Gottesman.

  10. Method for non-destructive measurement of heat affected zone of identification code on nuclear fuel rod

    International Nuclear Information System (INIS)

    In a method for the nondestructive measurement of the depth of the heat affected zone underneath a laser generated identification code on a nuclear fuel rod tube, the change in impedance of an electromagnetic foil produced by a portion of the tube is measured before and after the etching of a bar code is performed by use of laser power. The impedance change in the coil produced by the bar code-bearing tube portion is compared with the impedance change produced in the coil by the same tube portion before the bar code is generated thereon to determine whether a maximum allowed depth of the heat affected zone of the tube portion has been exceeded. (author)

  11. Studies of $\\gamma\\gamma\\to\\Lambda\\bar{\\Lambda},\\Sigma^0\\bar{\\Sigma^0}$ production at Belle

    CERN Document Server

    Kuo, C C; Adachi, I; Aihara, H; Anipko, D; Aoki, K; Arakawa, T; Arinstein, K; Asano, Y; Aso, T; Aulchenko, V M; Aushev, T; Aziz, T; Bahinipati, S; Bakich, A M; Balagura, V; Ban, Y; Banerjee, S; Barberio, E; Barbero, M; Bay, A; Bedny, I; Belous, K S; Bitenc, U; Bizjak, I; Blyth, S; Bondar, A; Bozek, A; Bracko, M; Brodzicka, J; Browder, T E; Chang, M C; Chang, P; Chao, Y; Chen, A; Chen, K F; Chen, W T; Cheon, B G; Chistov, R; Choi, J H; Choi, S K; Choi, Y; Choi, Y K; Chuvikov, A; Cole, S; Dalseno, J; Danilov, M; Dash, M; Dowd, R; Dragic, J; Drutskoy, A; Eidelman, S; Enari, Y; Epifanov, D A; Fratina, S; Fujii, H; Fujikawa, M; Gabyshev, N; Garmash, A; Gershon, T; Go, A; Gokhroo, G; Goldenzweig, P; Golob, B; Gorisek, A; Grosse-Perdekamp, M; Guler, H; Ha, H; Haba, J; Hara, K; Hara, T; Hasegawa, Y; Hastings, N C; Hayasaka, K; Hayashii, H; Hazumi, M; Heffernan, D; Higuchi, T; Hinz, L; Hokuue, T; Hoshi, Y; Hoshina, K; Hou, S; Hou, W S; Hsiung, Y B; Igarashi, Y; Iijima, T; Ikado, K; Imoto, A; Inami, K; Ishikawa, A; Ishino, H; Itoh, K; Itoh, R; Iwabuchi, M; Iwasaki, M; Iwasaki, Y; Jacoby, C; Jones, M; Kakuno, H; Kang, J H; Kang, J S; Kapusta, P; Kataoka, S U; Katayama, N; Kawai, H; Kawasaki, T; Khan, H R; Kibayashi, A; Kichimi, H; Kikuchi, N; Kim, H J; Kim, H O; Kim, J H; Kim, S K; Kim, T H; Kim, Y J; Kinoshita, K; Kishimoto, N; Korpar, S; Kozakai, Y; Krizan, P; Krokovnyi, P P; Kubota, T; Kulasiri, R; Kumar, R; Kuo, C C; Kurihara, E; Kusaka, A; Kuzmin, A; Kwon, Y J; Lange, J S; Leder, G; Lee, J; Lee, S E; Lee, Y J; Lesiak, T; Li, J; Limosani, A; Lin, C Y; Lin, S W; Liu, Y; Liventsev, D; MacNaughton, J; Majumder, G; Mandl, F; Marlow, D; Matsumoto, T; Matyja, A; McOnie, S; Medvedeva, T; Mikami, Y; Mitaroff, W A; Miyabayashi, K; Miyake, H; Miyata, H; Miyazaki, Y; Mizuk, R; Mohapatra, D; Moloney, G R; Mori, T; Müller, J; Murakami, A; Nagamine, T; Nagasaka, Y; Nakagawa, T; Nakahama, Y; Nakamura, I; Nakano, E; Nakao, M; Nakazawa, H; Natkaniec, Z; Neichi, K; Nishida, S; Nishimura, K; Nitoh, O; Noguchi, S; Nozaki, T; Ogawa, A; Ogawa, S; Ohshima, T; Okabe, T; Okuno, S; Olsen, S L; Ono, S; Ostrowicz, W; Ozaki, H; Pakhlov, P; Pakhlova, G; Palka, H; Park, C W; Park, H; Park, K S; Parslow, N; Peak, L S; Pernicka, M; Pestotnik, R; Peters, M; Piilonen, L E; Poluektov, A; Ronga, F J; Root, N; Rorie, J; Rózanska, M; Sahoo, H; Saitoh, S; Sakai, Y; Sakamoto, H; Sakaue, H; Sarangi, T R; Sato, N; Satoyama, N; Sayeed, K; Schietinger, T; Schneider, O; Schonmeier, P; Schümann, J; Schwanda, C; Schwartz, A J; Seidl, R; Seki, T; Senyo, K; Sevior, M E; Shapkin, M; Shen, Y T; Shibuya, H; Shwartz, B; Sidorov, V; Singh, J B; Sokolov, A; Somov, A; Soni, N; Stamen, R; Stanic, S; Staric, M; Stöck, H; Sugiyama, A; Sumisawa, K; Sumiyoshi, T; Suzuki, S; Suzuki, S Y; Tajima, O; Takada, N; Takasaki, F; Tamai, K; Tamura, N; Tanabe, K; Tanaka, M; Taylor, G N; Teramoto, Y; Tian, X C; Tikhomirov, I; Trabelsi, K; Tsai, Y T; Tse, Y F; Tsuboyama, T; Tsukamoto, T; Uchida, K; Uchida, Y; Uehara, S; Uglov, T; Ueno, K; Unno, Y; Uno, S; Urquijo, P; Ushiroda, Y; Usov, Yu; Varner, G; Varvell, K E; Villa, S; Wang, C C; Wang, C H; Wang, M Z; Watanabe, M; Watanabe, Y; Wicht, J; Widhalm, L; Wiechczynski, J; Won, E; Wu, C H; Xie, Q L; Yabsley, B D; Yamaguchi, A; Yamamoto, H; Yamamoto, S; Yamashita, Y; Yamauchi, M; Heyoung Yang; Yoshino, S; Yuan, Y; Yusa, Y; Zang, S L; Zhang, C C; Zhang, J; Zhang, L M; Zhang, Z P; Zhilich, V; Ziegler, T; Zupanc, A; Zürcher, D; al., et

    2006-01-01

    Cross sections for hyperon pair production from two-photon collisions, $\\gamma\\gamma\\to\\Lambda\\bar{\\Lambda},\\Sigma^0\\bar{\\Sigma^0}$, are measured in the 2-4 GeV energy region at Belle, using 464 fb$^{-1}$ of data. A contribution from the intermediate resonance $\\eta_c(1S)$ is observed, and the products of the two-photon width of the $\\eta_c(1S)$ and its branching ratios to $\\Lambda\\bar{\\Lambda}$ and $\\Sigma^0\\bar{\\Sigma^0}$ are measured. The results will help test QCD models.

  12. Investigation of the $X(5568)$ as a fully open-flavor $su\\bar b\\bar d$ tetraquark state

    CERN Document Server

    Chen, Wei; Liu, Xiang; Steele, T G; Zhu, Shi-Lin

    2016-01-01

    We investigate the newly observed charged $X(5568)$ meson as an exotic open-flavor tetraquark state $su\\bar b\\bar d$ with $J^P=0^+/1^+$ in the framework of QCD sum rules. We use the color antisymmetric $[\\mathbf{\\bar 3_c}]_{su} \\otimes [\\mathbf{3_c}]_{\\bar{b}\\bar d}$ tetraquark currents in both scalar and axial-vector channels to perform evaluations and numerical analyses. Our results imply that the $X(5568)$ can be interpreted as both the scalar $su\\bar b\\bar d$ tetraquark state and the axial-vector one, which are in good agreement with the experiment observation. We also investigate the possible decay patterns of the $X(5568)$ and suggest to search for its neutral partner in the radiative decay into $B_s^0 \\gamma$ and $B_s^* \\gamma$, which can be used to determine its spin-parity quantum numbers. Moreover, we predict its charmed partner state around $2.55$ GeV with the quark content $su\\bar c\\bar d$ and $J^P=0^+/1^+$.

  13. Inelastic Seismic Response of Reinforced Concrete Frame Structures Reinforced with HRB500 Steel Bars%配置HRB500钢筋的框架结构非弹性地震反应分析

    Institute of Scientific and Technical Information of China (English)

    韦锋; 刘刚; 王晓锋; 朱爱萍; 傅剑平

    2011-01-01

    To achieve sustainable development of construction industry, the application of HRB500 reinforcement with high strength and high ductility in RC structures is being promoted in civil and structural engineering in China. But few studies focus on seismic behaviors of RC structures reinforced with HRB500 bars. In this analysis, three RC frame structures on the Zone of Fortification Intensity 8 (0.3g) in China reinforced with HRB500, HRB400 and HRB335 bars respectively, are designed confirming to the latest draft of the revising Code for the Design of Concrete Structures. Then inelastic seismic response analyses of the three frames with multiple inputs of ground motions are conducted. The seismic response rules and seismic performances of the RC frame reinforced with HRB500 bars are compared with those frames reinforced with HRB400 and HRB335 bars. The analytical results indicate that under ground motions in rare earthquake level, the maximum displacements of the frame reinforced with HRB500 bars are roughly the same as those of the frames reinforced with HRB400 and HRB335 bars, while the rotation ductility demand of elements in the former structure is smaller than those of elements in the latter structures. It is also found that the frame reinforced with HRB500 bars develops a plastic energy dissipation mechanism that is dominated by beam hinges under major earthquake, and the maximum interstorey drift of the frame can satisfy the requirement in the Code for the RC Frame Structures.%为实现建筑行业的可持续发展,中国土木建筑工程界正在推广应用HRB500级高强钢筋,但是,以HRB500钢筋作为主要受力钢筋的混凝土结构的抗震性能研究还相对缺乏.该文按最新修订稿设计了3个配置不同强度钢筋的8度0.3 g区一级抗震等级的混凝土框架结构,并完成了该3个结构在多波输入下的非弹性地震响应分析,对比了配置HRB500钢筋的混凝土框架结构与配置HRB400和HRB335钢筋的相应

  14. Querying Source Code with Natural Language

    CERN Document Server

    Kimmig, Markus; Mezini, Mira

    2012-01-01

    One common task of developing or maintaining software is searching the source code for information like specific method calls or write accesses to certain fields. This kind of information is required to correctly implement new features and to solve bugs. This paper presents an approach for querying source code with natural language.

  15. Querying Source Code with Natural Language

    OpenAIRE

    Kimmig, Markus; Monperrus, Martin; Mezini, Mira

    2011-01-01

    International audience; One common task of developing or maintaining software is searching the source code for information like specific method calls or write accesses to certain fields. This kind of information is required to correctly implement new features and to solve bugs. This paper presents an approach for querying source code with natural language.

  16. LEARNING ELEMENT „URZICÓ IN PARALLEL BARS

    Directory of Open Access Journals (Sweden)

    DAN BURINCÃ, Honored Master of Sports

    2012-12-01

    Full Text Available Currently there is an ongoing concern for increasing difficulty, pre- cision and spectacular technical elements and combinations. Also, there is a tendency to introduce new elements, original and dynamic, full of technical virtuosity in each unit. In light of the new code of points, there is an increased requirement referees. This requirement will be determined by regulations granting bonus- es (between one and six tenths. They are obtained by performing ele- ments D, E and F, the extreme difficulty or complicated their specific binding. Gymnasts training towards future years is the most important task of coaches.

  17. INFLUENCING OF FRICTION IN HINGES FORCE SIZE OF BARS

    Directory of Open Access Journals (Sweden)

    BOHOMAZ V. N.

    2016-04-01

    Full Text Available Formulation of the problem. The size of critical force of bar on the traditional method of calculation is determined in supposition of ideal hinge in the place of fixing of bar. There are both a hinge resistance at the turn of bar ends and their moving in the real hinges. Thus, there is the necessity of influencing character determination of these hinge imperfections on the size of critical force. In the existent scientific labours is devoted the alike problems, influencing of friction in the hinges of bar fastening on the size of critical force was not taken into account. At determination of bars stability with no ideality of hinges friction in them it is possible to take into account by the eccentric appendix of loading or appendix of moment. However at such approach it is difficult enough to define the size of attached force or moment. Purpose. To set influencing of friction in the hinge of bar fastening on of his critical force size in sense of Euler, and also build dependences for determination of bar critical force taking into account mechanical descriptions of hinges materials. Conclusion. For the task of determination the size of bar critical force with the joint fastening on ends are got the dependences which take into account mechanical descriptions of material hinge. The received dependences allow to define more exact meaning of critical force for bars. The examples of calculation of whole bar and bar with undercuting in the middle are resulted that values of critical force, certain on a traditional method are overpriced.

  18. Polyphase alternating codes

    OpenAIRE

    M. Markkanen; Vierinen, J.; Markkanen, J.

    2007-01-01

    We present a new class of alternating codes. Instead of the customary binary phase codes, the new codes utilize either p or p–1 phases, where p is a prime number. The first class of codes has code length pm, where m is a positive integer, the second class has code length p–1. We give an actual construction algorithm, and explain the principles behind it. We ...

  19. Bars and spheroids in gravimetry problem

    CERN Document Server

    Sizikov, Valery

    2016-01-01

    The direct gravimetry problem is solved by dividing each deposit body into a set of vertical adjoining bars, whereas in the inverse problem, each deposit body is modelled by a homogeneous ellipsoid of revolution (spheroid). Well-known formulae for the z-component of gravitational intensity for a spheroid are transformed to a convenient form. Parameters of a spheroid are determined by minimizing the Tikhonov smoothing functional with constraints on the parameters, which makes the ill-posed inverse problem by unique and stable. The Bulakh algorithm for initial estimating the depth and mass of a deposit is modified. The proposed technique is illustrated by numerical model examples of deposits in the form of two and five bodies. The inverse gravimetry problem is interpreted as a gravitational tomography problem or, in other words, as "introscopy" of Earth's crust and mantle.

  20. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.