WorldWideScience

Sample records for balls system procesy

  1. Crystal ball data acquisition system

    International Nuclear Information System (INIS)

    Chestnut, R.; Kiesling, C.; Bloom, E.; Bulos, F.; Gaiser, J.; Godfrey, G.; Oreglia, M.; Partridge, R.; Peck, C.; Porter, F.; Aschman, D.; Cavali-Sforza, M.; Coyne, D.; Sadrozinski, H.; Kollmann, W.; Richardson, M.

    1979-01-01

    The data acquisition system for the Crystal Ball project at SLAC is described. A PDP-11/t55 using RSX-11M connected to the SLAC Triplex is the basis of the system. A ''physics pipeline'' allows physicists to write their own equipment-monitoring or physics tasks which require event sampling. As well, an interactive analysis package (MULTI) is in the pipeline. Histogram collection and display on the PDP are implemented using the Triplex histogramming package. Various interactive event displays are also implemented

  2. Fractal Aggregates in Tennis Ball Systems

    Science.gov (United States)

    Sabin, J.; Bandin, M.; Prieto, G.; Sarmiento, F.

    2009-01-01

    We present a new practical exercise to explain the mechanisms of aggregation of some colloids which are otherwise not easy to understand. We have used tennis balls to simulate, in a visual way, the aggregation of colloids under reaction-limited colloid aggregation (RLCA) and diffusion-limited colloid aggregation (DLCA) regimes. We have used the…

  3. Automatic optical inspection system design for golf ball

    Science.gov (United States)

    Wu, Hsien-Huang; Su, Jyun-Wei; Chen, Chih-Lin

    2016-09-01

    ith the growing popularity of golf sport all over the world, the quantities of relevant products are increasing year by year. To create innovation and improvement in quality while reducing production cost, automation of manufacturing become a necessary and important issue. This paper reflect the trend of this production automa- tion. It uses the AOI (Automated Optical Inspection) technology to develop a system which can automatically detect defects on the golf ball. The current manual quality-inspection is not only error-prone but also very man- power demanding. Taking into consideration the competition of this industry in the near future, the development of related AOI equipment must be conducted as soon as possible. Due to the strong reflective property of the ball surface, as well as its surface dimples and subtle flaws, it is very difficult to take good quality image for automatic inspection. Based on the surface properties and shape of the ball, lighting has been properly design for image-taking environment and structure. Area-scan cameras have been used to acquire images with good contrast between defects and background to assure the achievement of the goal of automatic defect detection on the golf ball. The result obtained is that more than 973 of the NG balls have be detected, and system maintains less than 103 false alarm rate. The balls which are determined by the system to be NG will be inspected by human eye again. Therefore, the manpower spent in the inspection has been reduced by 903.

  4. Fuzzy Logic Control of a Ball on Sphere System

    Directory of Open Access Journals (Sweden)

    Seyed Alireza Moezi

    2014-01-01

    Full Text Available The scope of this paper is to present a fuzzy logic control of a class of multi-input multioutput (MIMO nonlinear systems called “system of ball on a sphere,” such an inherently nonlinear, unstable, and underactuated system, considered truly to be two independent ball and wheel systems around its equilibrium point. In this work, Sugeno method is investigated as a fuzzy controller method, so it works in a good state with optimization and adaptive techniques, which makes it very attractive in control problems, particularly for such nonlinear dynamic systems. The system’s dynamic is described and the equations are illustrated. The outputs are shown in different figures so as to be compared. Finally, these simulation results show the exactness of the controller’s performance.

  5. Analysis on Sealing Reliability of Bolted Joint Ball Head Component of Satellite Propulsion System

    Science.gov (United States)

    Guo, Tao; Fan, Yougao; Gao, Feng; Gu, Shixin; Wang, Wei

    2018-01-01

    Propulsion system is one of the important subsystems of satellite, and its performance directly affects the service life, attitude control and reliability of the satellite. The Paper analyzes the sealing principle of bolted joint ball head component of satellite propulsion system and discuss from the compatibility of hydrazine anhydrous and bolted joint ball head component, influence of ground environment on the sealing performance of bolted joint ball heads, and material failure caused by environment, showing that the sealing reliability of bolted joint ball head component is good and the influence of above three aspects on sealing of bolted joint ball head component can be ignored.

  6. Highly sensitive straightness measurement system using a ball-lens

    International Nuclear Information System (INIS)

    Lee, Minho; Yang, Hyun-Ik; Cho, Nahm-Gyoo

    2016-01-01

    In this paper, a new and simple optical technique to accurately measure the straightness errors of a linear stage is proposed. To improve the performance, including the measurement sensitivity and resolution of the measurement system, and to simultaneously measure two-dimensional straightness errors (2D straightness errors), an optical system was designed using a laser, a retro-reflector, a ball-lens, and a two-dimensional position sensitive detector (2D PSD). The characteristics of the measurement system were analytically and experimentally investigated. A prototype measurement system was manufactured based on the investigated results, and the performances of this system have been tested. The measuring performance of the system was easily improved by about 12 times using the proposed technique and it can be further improved. It is shown that the proposed technique can easily and effectively improve the performance of a conventional straightness measurement system based on the geometric optical method using a PSD. (paper)

  7. Dual PD Control Regulation with Nonlinear Compensation for a Ball and Plate System

    Directory of Open Access Journals (Sweden)

    Sergio Galvan-Colmenares

    2014-01-01

    Full Text Available The normal proportional derivative (PD control is modified to a new dual form for the regulation of a ball and plate system. First, to analyze this controller, a novel complete nonlinear model of the ball and plate system is obtained. Second, an asymptotic stable dual PD control with a nonlinear compensation is developed. Finally, the experimental results of ball and plate system are provided to verify the effectiveness of the proposed methodology.

  8. Ban Deodorant Ball Mortar.

    Science.gov (United States)

    Carpenter, D. Rae, Jr.; And Others

    1988-01-01

    Discusses a demonstration of vertical collision of two balls. Shows the theoretical height ratio using mathematical expression and diagrams. Compares it with researchers' experimental results. Expands the two-ball collision to multi-ball system. (YP)

  9. Thermal Analysis of Ball screw Systems by Explicit Finite Difference Method

    Energy Technology Data Exchange (ETDEWEB)

    Min, Bog Ki [Hanyang Univ., Seoul (Korea, Republic of); Park, Chun Hong; Chung, Sung Chong [KIMM, Daejeon (Korea, Republic of)

    2016-01-15

    Friction generated from balls and grooves incurs temperature rise in the ball screw system. Thermal deformation due to the heat degrades positioning accuracy of the feed drive system. To compensate for the thermal error, accurate prediction of the temperature distribution is required first. In this paper, to predict the temperature distribution according to the rotational speed, solid and hollow cylinders are applied for analysis of the ball screw shaft and nut, respectively. Boundary conditions such as the convective heat transfer coefficient, friction torque, and thermal contact conductance (TCC) between balls and grooves are formulated according to operating and fabrication conditions of the ball screw. Explicit FDM (finite difference method) is studied for development of a temperature prediction simulator. Its effectiveness is verified through numerical analysis.

  10. Control design and robustness analysis of a ball and plate system by using polynomial chaos

    Science.gov (United States)

    Colón, Diego; Balthazar, José M.; dos Reis, Célia A.; Bueno, Átila M.; Diniz, Ivando S.; de S. R. F. Rosa, Suelia

    2014-12-01

    In this paper, we present a mathematical model of a ball and plate system, a control law and analyze its robustness properties by using the polynomial chaos method. The ball rolls without slipping. There is an auxiliary robot vision system that determines the bodies' positions and velocities, and is used for control purposes. The actuators are to orthogonal DC motors, that changes the plate's angles with the ground. The model is a extension of the ball and beam system and is highly nonlinear. The system is decoupled in two independent equations for coordinates x and y. Finally, the resulting nonlinear closed loop systems are analyzed by the polynomial chaos methodology, which considers that some system parameters are random variables, and generates statistical data that can be used in the robustness analysis.

  11. Control design and robustness analysis of a ball and plate system by using polynomial chaos

    Energy Technology Data Exchange (ETDEWEB)

    Colón, Diego [University of São Paulo, Polytechnic School, LAC -PTC, São Paulo (Brazil); Balthazar, José M. [São Paulo State University - Rio Claro Campus, Rio Claro (Brazil); Reis, Célia A. dos [São Paulo State University - Bauru Campus, Bauru (Brazil); Bueno, Átila M.; Diniz, Ivando S. [São Paulo State University - Sorocaba Campus, Sorocaba (Brazil); Rosa, Suelia de S. R. F. [University of Brasilia, Brasilia (Brazil)

    2014-12-10

    In this paper, we present a mathematical model of a ball and plate system, a control law and analyze its robustness properties by using the polynomial chaos method. The ball rolls without slipping. There is an auxiliary robot vision system that determines the bodies' positions and velocities, and is used for control purposes. The actuators are to orthogonal DC motors, that changes the plate's angles with the ground. The model is a extension of the ball and beam system and is highly nonlinear. The system is decoupled in two independent equations for coordinates x and y. Finally, the resulting nonlinear closed loop systems are analyzed by the polynomial chaos methodology, which considers that some system parameters are random variables, and generates statistical data that can be used in the robustness analysis.

  12. A two-dimensional soliton system of vortex and Q-ball

    Science.gov (United States)

    Loginov, A. Yu.

    2018-02-01

    The (2 + 1)-dimensional gauge model describing two complex scalar fields that interact through a common Abelian gauge field is considered. It is shown that the model has a soliton solution that describes a system consisting of a vortex and a Q-ball. This two-dimensional system is electrically neutral, nevertheless it possesses a nonzero electric field. Moreover, the soliton system has a quantized magnetic flux and a nonzero angular momentum. Properties of this vortex-Q-ball system are investigated by analytical and numerical methods. It is found that the system combines properties of topological and nontopological solitons.

  13. Design and Implementation of Classical Sliding Mode Controller for Ball and Plate System

    Directory of Open Access Journals (Sweden)

    Laith Jasim Saud

    2017-06-01

    Full Text Available Ball and Plate (B&P system is a benchmark system in the control engineering field that has been used to verify many control methods. In this paper the design of a sliding mode . controller has been investigated and verified in real-time via implementation on a real ball and plate system hardware. The mathematical model has been derived and the necessary parameters have been measured. The sliding mode controller has been designed based on the obtained mathematical model. The resulting controller has been implemented using the Arduino Mega 2560 and a ball and plate system built completely from scratch. The Arduino has been programmed by the Arduino support target for Simulink. Three test signals has been used for verification purposes, namely: single point stabilizing, circular trajectory tracking, and square trajectory tracking. The results obtained have shown that sliding mode controller is able to follow the desired test signals with low error.

  14. A study on a new algorithm to optimize ball mill system based on modeling and GA

    International Nuclear Information System (INIS)

    Wang Heng; Jia Minping; Huang Peng; Chen Zuoliang

    2010-01-01

    Aiming at the disadvantage of conventional optimization method for ball mill pulverizing system, a novel approach based on RBF neural network and genetic algorithm was proposed in the present paper. Firstly, the experiments and measurement for fill level based on vibration signals of mill shell was introduced. Then, main factors which affected the power consumption of ball mill pulverizing system were analyzed, and the input variables of RBF neural network were determined. RBF neural network was used to map the complex non-linear relationship between the electric consumption and process parameters and the non-linear model of power consumption was built. Finally, the model was optimized by genetic algorithm and the optimal work conditions of ball mill pulverizing system were determined. The results demonstrate that the method is reliable and practical, and can reduce the electric consumption obviously and effectively.

  15. Two Point Correlation Functions for a Periodic Box-Ball System

    Directory of Open Access Journals (Sweden)

    Jun Mada

    2011-03-01

    Full Text Available We investigate correlation functions in a periodic box-ball system. For the second and the third nearest neighbor correlation functions, we give explicit formulae obtained by combinatorial methods. A recursion formula for a specific N-point functions is also presented.

  16. Single axis control of ball position in magnetic levitation system using fuzzy logic control

    Science.gov (United States)

    Sahoo, Narayan; Tripathy, Ashis; Sharma, Priyaranjan

    2018-03-01

    This paper presents the design and real time implementation of Fuzzy logic control(FLC) for the control of the position of a ferromagnetic ball by manipulating the current flowing in an electromagnet that changes the magnetic field acting on the ball. This system is highly nonlinear and open loop unstable. Many un-measurable disturbances are also acting on the system, making the control of it highly complex but interesting for any researcher in control system domain. First the system is modelled using the fundamental laws, which gives a nonlinear equation. The nonlinear model is then linearized at an operating point. Fuzzy logic controller is designed after studying the system in closed loop under PID control action. The controller is then implemented in real time using Simulink real time environment. The controller is tuned manually to get a stable and robust performance. The set point tracking performance of FLC and PID controllers were compared and analyzed.

  17. Ball clay

    Science.gov (United States)

    Virta, R.L.

    2001-01-01

    Part of the 2000 annual review of the industrial minerals sector. A general overview of the ball clay industry is provided. In 2000, sales of ball clay reached record levels, with sanitary ware and tile applications accounting for the largest sales. Ball clay production, consumption, prices, foreign trade, and industry news are summarized. The outlook for the ball clay industry is also outlined.

  18. A novel disturbance-observer based friction compensation scheme for ball and plate system.

    Science.gov (United States)

    Wang, Yongkun; Sun, Mingwei; Wang, Zenghui; Liu, Zhongxin; Chen, Zengqiang

    2014-03-01

    Friction is often ignored when designing a controller for the ball and plate system, which can lead to steady-error and stick-slip phenomena, especially for the small amplitude command. It is difficult to achieve high-precision control performance for the ball and plate system because of its friction. A novel reference compensation strategy is presented to attenuate the aftereffects caused by the friction. To realize this strategy, a linear control law is proposed based on a reduced-order observer. Neither the accurate friction model nor the estimation of specific characteristic parameters is needed in this design. Moreover, the describing function method illustrates that the limit cycle can be avoided. Finally, the comparative mathematical simulations and the practical experiments are used to validate the effectiveness of the proposed method. © 2013 ISA Published by ISA All rights reserved.

  19. A numerical scheme using multi-shockpeakons to compute solutions of the Degasperis-Procesi equation

    Directory of Open Access Journals (Sweden)

    Hakon A. Hoel

    2007-07-01

    Full Text Available We consider a numerical scheme for entropy weak solutions of the DP (Degasperis-Procesi equation $u_t - u_{xxt} + 4uu_x = 3u_{x}u_{xx}+ uu_{xxx}$. Multi-shockpeakons, functions of the form $$ u(x,t =sum_{i=1}^n(m_i(t -hbox{sign}(x-x_i(ts_i(te^{-|x-x_i(t|}, $$ are solutions of the DP equation with a special property; their evolution in time is described by a dynamical system of ODEs. This property makes multi-shockpeakons relatively easy to simulate numerically. We prove that if we are given a non-negative initial function $u_0 in L^1(mathbb{R}cap BV(mathbb{R}$ such that $u_{0} - u_{0,x}$ is a positive Radon measure, then one can construct a sequence of multi-shockpeakons which converges to the unique entropy weak solution in $mathbb{R}imes[0,T$ for any $T>0$. From this convergence result, we construct a multi-shockpeakon based numerical scheme for solving the DP equation.

  20. Research on Quality Inspection and Sorting On-line System for Bearing Steel Ball

    Directory of Open Access Journals (Sweden)

    Yu Runxiang

    2015-01-01

    Full Text Available To detect the flaws of bearing steel ball and sort its quality on-line, a kind of online quality detecting and sorting system for bearing steel ball is developed, which based on the eddy current inspection theory. The design of scheme, circuit and mechanical structure of the system is described in detail. PSD(Phase Sensitive Detection is applied to pick up the signal of cracks and restrain interferential signal. The flaws will be quantificational analysed based on the X-R orthogonal decomposition technology which include the size and depth information of flaws. By analysing and processing the amplitude and phase of the defect signal, the flaws can be found with high accuracy and low error-detected ratio. ARM and MCU Processor ensures the real-time ability of discriminating algorithm. The CPLD is used for generating reference signal which can be easy to get synchronous with the source signal. It has good properties of real-time to detect the quality of bearing steel ball.

  1. Ball milled bauxite residue as a reinforcing filler in phosphate-based intumescent system

    Directory of Open Access Journals (Sweden)

    Adiat Ibironke Arogundade

    2018-01-01

    Full Text Available Bauxite residue (BR is an alumina refinery waste with a global disposal problem. Of the 120 MT generated annually, only 3 MT is disposed via utilization. One of the significant challenges to sustainable utilization has been found to be the cost of processing. In this work, using ball milling, we achieved material modification of bauxite residue. Spectrometric imaging with FESEM showed the transformation from an aggregate structure to nano, platy particulates, leading to particle size homogeneity. BET analysis showed surface area was increased by 23%, while pH was reduced from 10.8 to 9.1 due to collapsing of the hydroxyl surface by the fracturing action of the ball mill. Incorporation of this into a phosphate-based fire retardant, intumescent formulation led to improved material dispersion and the formation of reinforcing heat shielding char nodules. XRD revealed the formation of ceramic metal phosphates which acted as an additional heat sink to the intumescent system, thereby reducing char oxidation and heat transfer to the substrate. Steel substrate temperature from a Bunsen burner test reduced by 33%. Therefore, ball milling can serve as a simple, low-cost processing route for the reuse of bauxite residue in intumescent composites.

  2. Ball clay

    Science.gov (United States)

    Virta, Robert L.

    2010-01-01

    The article reports on the global market performance of ball clay in 2009 and presents an outlook for its 2010 performance. Several companies mined ball call in the country including Old Hickey Clay Co., Kentucky-Tennessee Clay Co., and H.C. Spinks Clay Co. Information on the decline in ball clay imports and exports is also presented.

  3. Use Of REX Control System For The Ball On Spool Model

    Science.gov (United States)

    Ožana, Štěpán; Pieš, Martin; Hájovský, Radovan; Dočekal, Tomáš

    2015-07-01

    This paper deals with the design and implementation of linear quadratic controller (LQR) for modeling of Ball on Spool. The paper presents the entire process, starting from mathematical model through control design towards application of controller with the use of given hardware platform. Proposed solution by means of REX Control System provides a high level of user comfort regarding implementation of control loop, diagnostics and automatically generated visualization based on HTML5. It represents an ideal example of a complex nonlinear mechatronic system with a lot of possibilities to apply other types of controllers.

  4. Persistence Property and Estimate on Momentum Support for the Integrable Degasperis-Procesi Equation

    Directory of Open Access Journals (Sweden)

    Zhengguang Guo

    2013-01-01

    Full Text Available It is shown that a strong solution of the Degasperis-Procesi equation possesses persistence property in the sense that the solution with algebraically decaying initial data and its spatial derivative must retain this property. Moreover, we give estimates of measure for the momentum support.

  5. Failure Diagnosis System for a Ball-Screw by Using Vibration Signals

    Directory of Open Access Journals (Sweden)

    Won Gi Lee

    2015-01-01

    Full Text Available Recently, in order to reduce high maintenance costs and to increase operating ratio in manufacturing systems, condition-based maintenance (CBM has been developed. CBM is carried out with indicators, which show equipment’s faults and performance deterioration. In this study, indicator signal acquisition and condition monitoring are applied to a ball-screw-driven stage. Although ball-screw is a typical linearly reciprocating part and is widely used in industry, it has not gained attention to be diagnosed compared to rotating parts such as motor, pump, and bearing. First, the vibration-based monitoring method, which uses vibration signal to monitor the condition of a machine, is proposed. Second, Wavelet transform is used to analyze the defect signals in time-frequency domain. Finally, the failure diagnosis system is developed using the analysis, and then its performance is evaluated. Using the system, we estimated the severity of failure and detect the defect position. The low defect frequency (≈58.7 Hz is spread all over the time in the Wavelet-filtered signal with low frequency range. Its amplitude reflects the progress of defect. The defect position was found in the signal with high frequency range (768~1,536 Hz. It was detected from the interval between abrupt changes of signal.

  6. Ball lightning.

    OpenAIRE

    Stenhoff, Mark

    1988-01-01

    Ball lightning is alleged by some to be a rare atmospheric phenomenon usually associated with thunderstorms, while others hold that it does not exist. This controversy has continued for centuries. This study comprises a critical evaluation of evidence for the existence of ball lightning. An historical review of the controversy is first presented, giving a chronological account of developments in ball lightning theories and of important observations alleged to be of the phenomenon. Other pheno...

  7. Ball clay

    Science.gov (United States)

    Virta, R.L.

    2000-01-01

    Part of the 1999 Industrial Minerals Review. The state of the ball clay industry in 1999 is presented. Record highs in the sales and use of ball clay were attained in 1999 due to the continued strength of the U.S. economy. U.S. production was estimated at 1.25 million st for the year, with more than half of that amount mined in Tennessee. Details of the consumption, price, imports, and exports of ball clay in 1999 and the outlook for ball clay over the next few years are provided.

  8. Ball clay

    Science.gov (United States)

    Virta, R.L.

    2013-01-01

    Four companies — H.C. Spinks Clay Co., Inc., Imerys, Old Hickory Clay Co. and Unimin Corp. — mined ball clay in five U.S. states in 2012. Production, on the basis of preliminary data, was 900 kt (992,000 st), with an estimated value of $42.3 million. This was a slight increase in tonnage from 886 kt (977,000 st), with a value of $40.9 million in 2011. Tennessee was the leading ball clay producing state, with 63 percent of domestic production, followed by Texas, Mississippi, Kentucky and Indiana. Reported ball clay production from Indiana probably was fire clay rather than ball clay. About 69 percent of total ball clay production was airfloat, 20 percent was crude and 11 percent was water-slurried.

  9. A Linear Active Disturbance Rejection Control for a Ball and Rigid Triangle System

    Directory of Open Access Journals (Sweden)

    Carlos Aguilar-Ibanez

    2016-01-01

    Full Text Available This paper proposes an application of linear flatness control along with active disturbance rejection control (ADRC for the local stabilization and trajectory tracking problems in the underactuated ball and rigid triangle system. To this end, an observer-based linear controller of the ADRC type is designed based on the flat tangent linearization of the system around its corresponding unstable equilibrium rest position. It was accomplished through two decoupled linear extended observers and a single linear output feedback controller, with disturbance cancelation features. The controller guarantees locally exponentially asymptotic stability for the stabilization problem and practical local stability in the solution of the tracking error. An advantage of combining the flatness and the ADRC methods is that it possible to perform online estimates and cancels the undesirable effects of the higher-order nonlinearities discarded by the linearization approximation. Simulation indicates that the proposed controller behaves remarkably well, having an acceptable domain of attraction.

  10. Multi loop soliton solutions and their interactions in the Degasperis-Procesi equation

    OpenAIRE

    Stalin, S.; Senthilvelan, M.

    2012-01-01

    In this article, we construct loop soliton solutions and mixed soliton - loop soliton solution for the Degasperis-Procesi equation. To explore these solutions we adopt the procedure given by Matsuno. By appropriately modifying the $\\tau$-function given in the above paper we derive these solutions. We present the explicit form of one and two loop soliton solutions and mixed soliton - loop soliton solutions and investigate the interaction between (i) two loop soliton solutions in different para...

  11. FOUR BALL BEST BALL 1

    Directory of Open Access Journals (Sweden)

    Geoff Pollard

    2010-03-01

    Full Text Available In this paper a four-ball-best-ball (4BBB model for pairs of golf players is set up. The 4BBB match-play scoring system is seen to satisfy a basic requirement of fairness. It is shown that it is not strictly possible to rate individual players as 4BBB players. However, a (reasonably broad class of individual players is identified such that it is possible to rate them individually as 4BBB players. The capacity of an individual to play birdies is seen to be a very important determinant in being a successful member of a 4BBB pair, but there are other minor factors as well. Consideration is given to equal and unequal 4BBB pairs. The transitive law is seen to apply for 4BBB pairs. Thus, if pair A is better than pair B, and pair B is better than pair C, then pair A must be better than pair C. Correspondingly, if pair A is equal to pair B, and pair B is equal to pair C, then pair A is equal to pair C. Consideration is given to some strategic issues in 4BBB match-play golf. For example, the conditions under which a player should take a greater risk and have a higher probability of obtaining a bogie in order to achieve a higher probability of scoring a birdie, are determined. Also, the conditions under which a player, noting that his partner is about to have a ‘bad’ hole and score only a par or a bogie, should ‘play safe’, are determined. Thirdly, players who can interact in certain ways are seen to have an advantage over those pairs that cannot do this. Finally, one pair’s optimal strategy when they see that their opponents are about to score a par or a bogie, but not a birdie, is analyzed

  12. A robust calibration technique for acoustic emission systems based on momentum transfer from a ball drop

    Science.gov (United States)

    McLaskey, Gregory C.; Lockner, David A.; Kilgore, Brian D.; Beeler, Nicholas M.

    2015-01-01

    We describe a technique to estimate the seismic moment of acoustic emissions and other extremely small seismic events. Unlike previous calibration techniques, it does not require modeling of the wave propagation, sensor response, or signal conditioning. Rather, this technique calibrates the recording system as a whole and uses a ball impact as a reference source or empirical Green’s function. To correctly apply this technique, we develop mathematical expressions that link the seismic moment $M_{0}$ of internal seismic sources (i.e., earthquakes and acoustic emissions) to the impulse, or change in momentum $\\Delta p $, of externally applied seismic sources (i.e., meteor impacts or, in this case, ball impact). We find that, at low frequencies, moment and impulse are linked by a constant, which we call the force‐moment‐rate scale factor $C_{F\\dot{M}} = M_{0}/\\Delta p$. This constant is equal to twice the speed of sound in the material from which the seismic sources were generated. Next, we demonstrate the calibration technique on two different experimental rock mechanics facilities. The first example is a saw‐cut cylindrical granite sample that is loaded in a triaxial apparatus at 40 MPa confining pressure. The second example is a 2 m long fault cut in a granite sample and deformed in a large biaxial apparatus at lower stress levels. Using the empirical calibration technique, we are able to determine absolute source parameters including the seismic moment, corner frequency, stress drop, and radiated energy of these magnitude −2.5 to −7 seismic events.

  13. Happy Balls, Unhappy Balls, and Newton's Cradle

    Science.gov (United States)

    Kagan, David

    2010-01-01

    The intricacies of Newton's Cradle are well covered in the literature going as far back as the time of Newton! These discussions generally center on the highly elastic collisions of metal spheres. Thanks to the invention of happy and unhappy balls, you can build and study the interaction of less elastic systems (see Fig. 1).

  14. Limiting Behavior of Travelling Waves for the Modified Degasperis-Procesi Equation

    Directory of Open Access Journals (Sweden)

    Jiuli Yin

    2014-01-01

    Full Text Available Using an improved qualitative method which combines characteristics of several methods, we classify all travelling wave solutions of the modified Degasperis-Procesi equation in specified regions of the parametric space. Besides some popular exotic solutions including peaked waves, and looped and cusped waves, this equation also admits some very particular waves, such as fractal-like waves, double stumpons, double kinked waves, and butterfly-like waves. The last three types of solutions have not been reported in the literature. Furthermore, we give the limiting behavior of all periodic solutions as the parameters trend to some special values.

  15. Science of Ball Lightning (Fire Ball)

    Science.gov (United States)

    Ohtsuki, Yoshi-Hiko

    1989-08-01

    The Table of Contents for the full book PDF is as follows: * Organizing Committee * Preface * Ball Lightning -- The Continuing Challenge * Hungarian Ball Lightning Observations in 1987 * Nature of Ball Lightning in Japan * Phenomenological and Psychological Analysis of 150 Austrian Ball Lightning Reports * Physical Problems and Physical Properties of Ball Lightning * Statistical Analysis of the Ball Lightning Properties * A Fluid-Dynamical Model for Ball Lightning and Bead Lightning * The Lifetime of Hill's Vortex * Electrical and Radiative Properties of Ball Lightning * The Candle Flame as a Model of Ball Lightning * A Model for Ball Lightning * The High-Temperature Physico-Chemical Processes in the Lightning Storm Atmosphere (A Physico-Chemical Model of Ball Lightning) * New Approach to Ball Lightning * A Calculation of Electric Field of Ball Lightning * The Physical Explanation to the UFO over Xinjiang, Northern West China * Electric Reconnection, Critical Ionization Velocity, Ponderomotive Force, and Their Applications to Triggered and Ball Lightning * The PLASMAK™ Configuration and Ball Lightning * Experimental Research on Ball Lightning * Performance of High-Voltage Test Facility Designed for Investigation of Ball Lightning * List of Participants

  16. DESIGNING AND EFFICIENCY EFFECT OF AUTOMATIC BALL-CLEANING SYSTEM FOR CONDENSER 180-KTsS-1 OF TURBINE Т-180/210-130-1 LMZ. Part 2

    Directory of Open Access Journals (Sweden)

    Yu. A. Zenovich-Leshkevich-Ol’pinskiy

    2015-01-01

    Full Text Available The authors elaborate the economical efficiency evaluation technique that could be universal and applied for technical-and-economic feasibility study of the ball-cleaning system installation on the steam turbines of the electric power plants. Besides the effect from reducing the exhaust steam pressure in the condenser by means of the ball-cleaning system implementation, this technique also accounts for the effect of lowering the condenser hydraulic pressure.The article refers to the practical results of the ball-cleaning system introduction on the steam turbines of Gomel CHP-2. As a result of regular application of the ball-cleaning system the temperature difference of the condensers of all blocks Т-180/210-130-1 confined into the regulatory values and the cleanness coefficient of all three turbine units reached 0,85. The authors consider the working results, implementation experience of the ball-cleaning system at Gomel CHP-2 and its efficiency evaluation technique to be worth disseminating when introducing the analogous systems at the plants of Belarusian power network.The authors suggest measures on the condenser automatic-cleaning system improvement with the turbine mathematical-simulation model employment that will make it possible to optimize the condenser cleaning regimes and to increase the ball-cleaning system effectiveness with the condenser cleanness coefficient growing up to 0,90–0,92.

  17. Analysis on Accuracy of Bias, Linearity and Stability of Measurement System in Ball screw Processes by Simulation

    Directory of Open Access Journals (Sweden)

    Fan-Yun Pai

    2015-11-01

    Full Text Available To consistently produce high quality products, a quality management system, such as the ISO9001, 2000 or TS 16949 must be practically implemented. One core instrument of the TS16949 MSA (Measurement System Analysis is to rank the capability of a measurement system and ensure the quality characteristics of the product would likely be transformed through the whole manufacturing process. It is important to reduce the risk of Type I errors (acceptable goods are misjudged as defective parts and Type II errors (defective parts are misjudged as good parts. An ideal measuring system would have the statistical characteristic of zero error, but such a system could hardly exist. Hence, to maintain better control of the variance that might occur in the manufacturing process, MSA is necessary for better quality control. Ball screws, which are a key component in precision machines, have significant attributes with respect to positioning and transmitting. Failures of lead accuracy and axial-gap of a ball screw can cause negative and expensive effects in machine positioning accuracy. Consequently, a functional measurement system can incur great savings by detecting Type I and Type II errors. If the measurement system fails with respect to specification of the product, it will likely misjudge Type I and Type II errors. Inspectors normally follow the MSA regulations for accuracy measurement, but the choice of measuring system does not merely depend on some simple indices. In this paper, we examine the stability of a measuring system by using a Monte Carlo simulation to establish bias, linearity variance of the normal distribution, and the probability density function. Further, we forecast the possible area distribution in the real case. After the simulation, the measurement capability will be improved, which helps the user classify the measurement system and establish measurement regulations for better performance and monitoring of the precision of the ball screw.

  18. 60-GHz Band Copper Ball Vertical Interconnection for MMW 3-D System-in-Package Front-End Modules

    Science.gov (United States)

    Yoshida, Satoshi; Tanifuji, Shoichi; Kameda, Suguru; Suematsu, Noriharu; Takagi, Tadashi; Tsubouchi, Kazuo

    In order to realize millimeter-wave (MMW) 3-D system-in-package (SiP) front-end modules, we propose a 60-GHz band copper ball vertical interconnection structure, which interconnects between vertically stacked substrates. The structure enables ICs to be placed between the vertically stacked substrates. Since the diameter of the copper balls must exceed the thickness of the ICs, the distance between the substrates in the modules is larger than that of the flip-chip interconnection widely used in the MMW-band. Therefore, the conventional flip-chip interconnection does not scale for the interconnection between the substrates in MMW 3-D SiP front-end modules. The layout of grounded copper balls and the patterns of inner ground layers in the upper/lower substrates are designed using 3-D electromagnetic field simulation. The designed structure allows less than 1dB transmission loss up to 71.1GHz, compared with a through transmission line. The result is verified with fabrication and measurement and confirms the feasibility of MMW 3-D SiP front-end modules.

  19. THE DETECTION OF THE NECESSARY CONDITIONS OF EFFECTIVE FUNCTIONING OF THE BALL CLEANING SYSTEM OF THE TUBES OF STEAM TURBINE CONDENSERS. Part 1

    Directory of Open Access Journals (Sweden)

    A. G. Gerasimova

    2017-01-01

    Full Text Available A problem of an increase of the power of turbine by improving heat transfer in condensers of steam turbines is considered in the article as a topical one. The analysis of contamination of the internal surfaces of cooling tubes and of the influence of pollution on the process of heat transfer in turbine condensers has been fulfilled. The existing method of cleaning of condenser tubes with the use of porous elastic balls of sponge rubber that is implemented on a number of large thermal power plants and state region power plants of the Republic of Belarus is examined. In the operation of the ball cleaning system a significant drawback has been revealed, viz. a low efficiency of this method due to the failure to comply with preparation the system of circulating water for operation. Also, a certain imperfection of ball cleaning system technology has been determined. One of the prerequisites for the effective functioning of the ball cleaning system is a certain degree of purity of the pipe system of the condenser, characterized by the coefficient of purity. To determine the effectiveness of ball cleaning system a series of experiments on the launching of porous rubber balls in the pipe system of the main and the embedded bunches of the T-250/300-240 UTMZ turbine has been produced. Immediately before the experiments hydraulic cleaning of the tubes of the condenser by a high-pressure installation were carried out. During the experiments, records of the number of downloaded porous rubber balls, of the number of rubber balls captured in a loading chamber, and of the number of rubber balls that remained in a calibration device were kept. A large proportion of default of the balls caused by the presence of residues of the carbonate sediments, that obstruct the movement of porous rubber balls in the tubes of the condenser, was determined. The presence of carbonate deposits in the tubes of the condenser indicates a lack of effectiveness of antiscale treatment

  20. CAVE: A package for detection and quantitative analysis of internal cavities in a system of overlapping balls: Application to proteins

    Science.gov (United States)

    Buša, Ján; Hayryan, Shura; Hu, Chin-Kun; Skřivánek, Jaroslav; Wu, Ming-Chya

    2010-12-01

    We developed a software package ( CAVE) in Fortran language to detect internal cavities in proteins which can be applied also to an arbitrary system of balls. The volume, the surface area and other quantitative characteristics of the cavities can be calculated. The code is based on the recently suggested enveloping triangulation algorithm [J. Buša et al., J. Comp. Chem. 30 (2009) 346] for computing volume and surface area of the cavity by analytical equations. Different standard sets of atomic radii can be used. The PDB compatible file containing the atomic coordinates must be stored on the disk in advance. Testing of the code on different proteins and artificial ball systems showed efficiency and accuracy of the algorithm. The program is fast. It can handle a system of several thousands of balls in the order of seconds on contemporary PC's. The code is open source and free. Program summaryProgram title: CAVE Catalogue identifier: AEHC_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHC_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 8670 No. of bytes in distributed program, including test data, etc.: 100 131 Distribution format: tar.gz Programming language: Fortran Computer: PC Pentium and Core Operating system: Linux system and Windows XP system Classification: 16.1 Nature of problem: Molecular structure analysis. Solution method: Analytical method for cavities detection, and numerical algorithm for volume and surface area calculation based on the analytical formulas, after using the stereographic transformation. Running time: Depends on the size of the molecule under consideration. The test example included in the distribution takes about 1 minute to run.

  1. Logistické procesy ve firmě Linde Gas

    OpenAIRE

    Rychlíková, Kamila

    2008-01-01

    I have decided to choose a topic that covers teoretical knowledge and my personal experiences. The topic is involved to the logistic processes in the company Linde Gas. The teoretical part of my essay focus on how to work integrated logistic system. On the other hand the practical part involves analyses and full desctriptions of the efficiency and integration in the logistic processes. I try to figure out improvements that would make some processes easier.

  2. [Changes of Peripheral Blood Marrow-Derived Suppressor Cell Level after Chemotherapy Induction Remission by VDLP Regimen and Their Relationship with Immune System in B-ALL Children].

    Science.gov (United States)

    Guo, Xue-Mei; Fang, Yong-Jun; Lv, Cheng-Lan; Wang, Yong-Ren; Sun, Xiao-Yan

    2017-12-01

    To investigate the changes of peripheral blood marrow-derived suppressor cell level after chemotherapy induction remission by regimen consisting of vincristine, daunorubicin, L-asparaginase and prednisone (VDLP) and to analyze their relationship with immume system in B-ALL children. Thirty B-ALL children after induction remission by VDLP regimen from August 2015 to August 2016 were selected as B-ALL group and 30 normal healthy children were selected as control group. The peripheral blood in 2 groups was collected and detected by flow cytometry, then the ratios of CD30 + cells and CD33 + HLA-DR - marrow-derived suppressor cells, CD14 + CD33 + HLA-DR - marrow-derived suppressor cells and CD15 + CD33 + HLA-DR - marrow-derived suppressor cells were calculated, and their changes after induction remission by VDLP regimen and the relationship with immune system were analyzed. After treatment the ratio of CD33 + cells in peripheral blood of B-ALL group and control group was not significantly different (P> 0.05), moreover, the ratio of CD33 + cells in B-ALL group was significantly higher than that before treatment (Pderived suppressor cells, CD14 + CD33 + HLA-DR - marrow-derived suppressor cells and CD15 + CD33 + HLA-DR - marrow-derived suppressor cells in B-ALL group were significantly lower than those in control group (all P0.05). The ratios of marrow-derived suppressor cells in peripheral blood of B-ALL children in complete remission after treatment with VDLP regimen are higher than those before treatment, but are significantly lower than normal value, which may be related with non-complese recovery of immune system in B-ALL children after treatment.

  3. Synthesis of carbon nanotubes from acetylene on the FeCoMgO catalytic system obtained by ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Biris, A R; Simon, S; Lupu, D; Misan, I [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania); Biris, A S; Dervishi, E; Li, Z; Watanabe, F [UALR Nanotechnology Center, University of Arkansas, 2801 S University Ave, Little Rock, AR 72204 (United States); Lucaci, M, E-mail: alexandru.biris@itim-cj.r [National Institute for Research and Development in Electrical Engineering ICPE-CA 313 Splaiul Unirii, 030138 Bucharest (Romania)

    2009-08-01

    Highly crystalline multi wall carbon nanotubes have been synthesized by RF-CVD from acetylene at 850{sup 0}C over a Fe:Co:MgO catalyst. The catalytic system was obtained by mixing for 100 h Fe, Co and MgO powders in a ball milling device under petroleum ether environment, followed by oxidation in air at 500{sup 0}C for 24 h. Most of the nanotubes had external diameters in order of dozens of nm and lengths of microns, resulting in an aspect ration of over 1000. Their external to internal diameter ratio varied between 2.5 and 3.

  4. Ball milling induced solid-state reactions in the La2O3-HfO2 ceramic system

    International Nuclear Information System (INIS)

    Chain, C.Y.; Quille, R.A.; Pasquevich, A.F.

    2010-01-01

    Ball milling of oxide blends can result in the formation of solid solutions depending on the characteristics of the oxides. In this paper the possibility of doping oxides with radioactive 181 Hf through the formation of these solutions is analyzed. The 181 Hf isotope decays to 181 Ta, which is an adequate probe for perturbed angular correlations (PAC) studies. Through the measurement of the hyperfine interactions of 181 Ta nuclei it is possible to determine the atomic distribution around the probes. We have thus studied the behavior of the La 2 O 3 -HfO 2 ceramic system subjected to high-energy ball milling. An oxide blend, containing few atomic percent of hafnium oxide, was milled during several hours resulting in the formation of hafnium oxide defective phases. The sample was finally annealed at high temperatures in order to facilitate the formation of solid solutions. This thermal treatment produced a solid-state reaction given place to Hf 2 La 2 O 7 pyrochlore and also the apparition of another phase or compound. The possibility of associating this last finding with a stabilized cubic phase of hafnium oxide resulting from lanthanum doping is analyzed.

  5. Objective validity of an implant-retained overdenture with a ball attachment system after marginal mandibulectomy.

    Science.gov (United States)

    Murase, Ryuichi; Ishikawa, Akiko; Sumida, Tomoki; Shinohara, Kozue; Nakashiro, Koh-ichi; Hamakawa, Hiroyuki

    2016-02-01

    Implant-retained overdentures are known to improve oral function, but the clinical impact on patients who have had mandibular resections is still debatable. We have treated 16 patients who had such resections for oral cancer and consequent loss of the alveolar ridge, with overdentures supported by osseointegrated implants and ball attachments. To quantify their functional improvement, we evaluated their maximum bite force and masticatory performance. Their function improved significantly, (from 77.5N - 365N, 371% increase in maximum bite force, pimplant. These results indicate that implant-retained overdentures are an effective way to rehabilitate patients after marginal mandibular resection. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  6. Modeling of the dynamics of GBB1005 Ball & Beam Educational Control System as a controlled mechanical system with a redundant coordinate

    Directory of Open Access Journals (Sweden)

    A. Ya. Krasinskii

    2014-01-01

    Full Text Available The method of research stability and stabilization of equilibrium of systems with geometrical constraints is elaborated and used for equilibrium for real mechatronic arrangement GBB1005 Ball & Beam. For mathematical model construction is used Shul'gin's equations with redundant coordinates. The through differentiation geometrical constraints obtained kinematic (holonomic constraints is necessary add for stability analysis. Asymptotic stability equilibrium for mechanical systems with redundant coordinates is possible , in spite of formal reduction to Lyapunov's especial case, if the number zero roots is equal the number constraints . More exact nonlinear mathematical model of the mechanical component Ball &Beam is considered in this paper. One nonlinear geometric constrain in this problem is allow find the new equilibrium position. The choice of linear control subsystem is depend from the choice of redundant coordinate.

  7. Having a Ball with Fitness Balls

    Science.gov (United States)

    McNulty, Betty

    2011-01-01

    Fitness programs can be greatly enhanced with the addition of fitness balls. They are a fun, challenging, economical, and safe way to incorporate a cardiovascular, strength, and stretching program for all fitness levels in a physical education setting. The use of these balls has become more popular during the last decade, and their benefits and…

  8. The Goldenrod Ball Gall

    Science.gov (United States)

    Fischer, Richard B.

    1974-01-01

    The paper presents a generalized life history of the goldenrod ball gall, a ball-shaped swelling found almost exclusively on the Canada goldenrod, Solidago canadensis, and caused by a peacock fly know as Eurosta soldiaginis. (KM)

  9. On-line transient stability assessment of large-scale power systems by using ball vector machines

    International Nuclear Information System (INIS)

    Mohammadi, M.; Gharehpetian, G.B.

    2010-01-01

    In this paper ball vector machine (BVM) has been used for on-line transient stability assessment of large-scale power systems. To classify the system transient security status, a BVM has been trained for all contingencies. The proposed BVM based security assessment algorithm has very small training time and space in comparison with artificial neural networks (ANN), support vector machines (SVM) and other machine learning based algorithms. In addition, the proposed algorithm has less support vectors (SV) and therefore is faster than existing algorithms for on-line applications. One of the main points, to apply a machine learning method is feature selection. In this paper, a new Decision Tree (DT) based feature selection technique has been presented. The proposed BVM based algorithm has been applied to New England 39-bus power system. The simulation results show the effectiveness and the stability of the proposed method for on-line transient stability assessment procedure of large-scale power system. The proposed feature selection algorithm has been compared with different feature selection algorithms. The simulation results demonstrate the effectiveness of the proposed feature algorithm.

  10. Integrated modeling and analysis of ball screw feed system and milling process with consideration of multi-excitation effect

    Science.gov (United States)

    Zhang, Xing; Zhang, Jun; Zhang, Wei; Liang, Tao; Liu, Hui; Zhao, Wanhua

    2018-01-01

    The present researches about feed drive system and milling process are almost independent with each other, and ignore the interaction between the two parts, especially the influence of nonideal motion of feed drive system on milling process. An integrated modeling method of ball screw feed system and milling process with multi-excitation effect is proposed in this paper. In the integrated model, firstly an analytical model of motor harmonic torque with consideration of asymmetrical drive circuit and asymmetrical permanent magnet is given. Then, the numerical simulation procedure of cutter/workpiece engagement during milling process with displacement fluctuation induced by harmonic torque is put forward, which is followed by the solving flow for the proposed integrated model. Based on the integrated model, a new kind of quality defect shown as contour low frequency oscillation on machined surface is studied by experiments and simulations. The results demonstrate that the forming mechanism of the contour oscillation can be ascribed to the multi-excitation effect with motor harmonic torque and milling force. Moreover, the influence of different milling conditions on the contour oscillation characteristics, particularly on surface roughness, are further discussed. The results indicate that it is necessary to explain the cause of the new kind of quality defect with a view of system integration.

  11. Ball Screw Actuator Including a Compliant Ball Screw Stop

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Hanlon, Casey (Inventor)

    2017-01-01

    An actuator includes a ball nut, a ball screw, and a ball screw stop. The ball nut is adapted to receive an input torque and in response rotates and supplies a drive force. The ball screw extends through the ball nut and has a first end and a second end. The ball screw receives the drive force from the ball nut and in response selectively translates between a retract position and a extend position. The ball screw stop is mounted on the ball screw proximate the first end to translate therewith. The ball screw stop engages the ball nut when the ball screw is in the extend position, translates, with compliance, a predetermined distance toward the first end upon engaging the ball nut, and prevents further rotation of the ball screw upon translating the predetermined distance.

  12. Procesy dezindustrializacji w aglomeracji łódzkiej w latach dziewięćdziesiątych

    OpenAIRE

    Marczyńska-Witczak, Ewa; Starzyńska, Wacława

    2002-01-01

    W artykule poddano analizie procesy transformacji gospodarczej zachodzące w Polsce w ciągu ostatnich dziesięciu lat, ich cechy oraz tempo przemian oraz porównano je z analogicznymi procesami występującymi wcześniej w Europie Zachodniej. Badano paradygmat, który stworzył zespół czynników wpływających na rozwój gospodarki świata i Polski. The paper attempts to analyse the processes of economic transformation that took place in Poland in the 1990s. It explores its characteristi...

  13. Procesy patologiczne w mózgu podczas jego niedokrwienia

    Directory of Open Access Journals (Sweden)

    Magdalena Justyna Kacperska

    2013-04-01

    Full Text Available Udar mózgu (stroke jest obecnie jedną z najczęstszych przyczyn zgonów i trwałego kalectwa. Udar niedokrwienny mózgu (ischaemic stroke, IS jest niebezpieczną chorobą nie tylko ze względu na dużą śmiertelność, ale również z powodu niepełnosprawności u pacjentów, którzy go przeżywają (około 76% przypadków. Jest to niejednorodna jednostka chorobowa, będąca zespołem objawów ogniskowych powstałych w wyniku niedokrwienia lub krwotoku do tkanki mózgowej spowodowanych wieloma różnymi przyczynami. Rozróżniamy dwa typy udarów mózgowych: krwotoczne i niedokrwienne. Udary krwotoczne stanowią 15% wszystkich udarów, pozostałe 80% to udary niedokrwienne. Udar mózgu jest chorobą ogólnoustrojową, głównie wynikającą z patologii naczyniowej. Ogromną rolę odgrywa tu miażdżyca i mechanizmy z nią związane. Proces chorobowy dotyczy całego organizmu, a nie tylko naczyń mózgowych. Z punktu widzenia patologii udar niedokrwienny mózgu jest dynamicznie rozwijającym się procesem neurodegeneracyjnym, który prowadzi do śmierci komórek (cell death. Oprócz uszkodzenia naczyniopochodnego choroba ta indukuje komórkowo-molekularną odpowiedź immunologiczną ośrodkowego układu nerwowego i układu naczyniowego, ukierunkowaną na rozwój reakcji zapalnej. Aktywowane komórki mózgu, a także komórki układu naczyniowego zaangażowane są w syntezę różnych molekuł, m.in. cytokin, chemokin, cząsteczek adhezyjnych oraz enzymów prozapalnych. Ciągle rośnie liczba doniesień potwierdzających duże znaczenie czynników zapalnych w rozwoju udaru niedokrwiennego mózgu. W procesie tym znaczącą rolę odgrywa bariera krew-mózg. Na poziomie komórkowym mikroglej stanowi główną linię nadzoru immunologicznego nad ośrodkowym układem nerwowym, odpowiedzialną za indukcję reakcji zapalnej w udarze mózgu. W udarze mózgu następuje gwałtowna zmiana ekspresji cytokin, które ujawniają neurodegeneracyjny efekt

  14. Output characteristics of floating type wave power generator system using a ball screw; Fuyugata nejishiki haryoku hatsuden sochi no shutsuryoku tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Abe, T.; Omata, K. [Meiji University, Tokyo (Japan)

    1996-10-27

    A floating type wave power generator system using a ball screw is proposed. Output characteristics are simulated on the supposition of its employment aboard a navigational aid buoy. The relative linear movement produced by waves between the main body and float is transmitted via a load column to a ball nut and is converted into a rotary movement of a threaded shaft engaging the ball nut. Attached to the bottom end of the threaded shaft is a one-way clutch which connects to the generator axle when the relative velocity between the float and main body is positive. The simulation was conducted for a wave activated power generation buoy, 2.6m in outer diameter, 4.5m in length, and 6000kg in total mass. The buoy generated a mechanical output of 340kW when exposed to a sinusoidal wave 2.5 seconds in period and 40cm in wave height. A tank test was performed using a reduced scale model consisting of a ball screw, bicycle dynamo, and float, with the main body being 318mm in diameter and 833mm in length, when an average output of 4.51W was obtained at 60% efficiency. The results of the experiment agreed in some degree with the results of calculation, verifying the righteousness of the theoretical formula. 3 refs., 7 figs., 4 tabs.

  15. Effect of Stiffness of Rolling Joints on the Dynamic Characteristic of Ball Screw Feed Systems in a Milling Machine

    Directory of Open Access Journals (Sweden)

    Dazhong Wang

    2015-01-01

    Full Text Available Dynamic characteristic of ball screw feed system in a milling machine is studied numerically in this work. In order to avoid the difficulty in determining the stiffness of rolling joints theoretically, a dynamic modeling method for analyzing the feed system is discussed, and a stiffness calculation method of the rolling joints is proposed based on the Hertz contact theory. Taking a 3-axis computer numerical control (CNC milling machine set ermined as a research object, the stiffness of its fixed joint between the column and the body together with the stiffness parameters of the rolling joints is evaluated according to the Takashi Yoshimura method. Then, a finite element (FE model is established for the machine tool. The correctness of the FE model and the stiffness calculation method of the rolling joints are validated by theoretical and experimental modal analysis results of the machine tool’s workbench. Under the two modeling methods of joints incorporating the stiffness parameters and rigid connection, a theoretical modal analysis is conducted for the CNC milling machine. The natural frequencies and modal shapes reveal that the joints’ dynamic characteristic has an important influence on the dynamic performance of a whole machine tool, especially for the case with natural frequency and higher modes.

  16. Entry Times Distribution for Dynamical Balls on Metric Spaces

    Science.gov (United States)

    Haydn, N.; Yang, F.

    2017-04-01

    We show that the entry and return times for dynamical balls (Bowen balls) is exponential for systems that have an α -mixing invariant measure with certain regularities. We also show that systems modeled by Young's tower has exponential entry time distribution for dynamical balls. We also apply the results to conformal maps and expanding maps on the interval.

  17. Berkeley High-Resolution Ball

    International Nuclear Information System (INIS)

    Diamond, R.M.

    1984-10-01

    Criteria for a high-resolution γ-ray system are discussed. Desirable properties are high resolution, good response function, and moderate solid angle so as to achieve not only double- but triple-coincidences with good statistics. The Berkeley High-Resolution Ball involved the first use of bismuth germanate (BGO) for anti-Compton shield for Ge detectors. The resulting compact shield permitted rather close packing of 21 detectors around a target. In addition, a small central BGO ball gives the total γ-ray energy and multiplicity, as well as the angular pattern of the γ rays. The 21-detector array is nearly complete, and the central ball has been designed, but not yet constructed. First results taken with 9 detector modules are shown for the nucleus 156 Er. The complex decay scheme indicates a transition from collective rotation (prolate shape) to single- particle states (possibly oblate) near spin 30 h, and has other interesting features

  18. MIPP Plastic Ball electronics upgrade

    Science.gov (United States)

    Baldin, Boris; MIPP Collaboration

    2009-10-01

    An upgrade electronics design for Plastic Ball detector is described. The Plastic Ball detector was a part of several experiments in the past and its back portion (proposed to be used in Main Injector Particle Production (MIPP)) consists of 340 photomultipliers equipped with a sandwich scintillator. The scintillator sandwich has fast and slow signal component with decay times 10 ns and 1 μs, respectively. The upgraded MIPP experiment will collect up to 12,000 events during each 4 s spill and read them out in ˜50 s between spills. The MIPP data acquisition system will employ deadtime-less concept successfully implemented in Muon Electronics of Dzero experiment at Fermilab An 8-channel prototype design of the Plastic Ball Front-End (PBFE) implementing these requirements is discussed. Details of the schematic design, simulation and prototype test results are discussed.

  19. A quality-of-life comparison between self-aligning and ball attachment systems for 2-implant-retained mandibular overdentures.

    Science.gov (United States)

    Bilhan, Hakan; Geckili, Onur; Sulun, Tonguc; Bilgin, Tayfun

    2011-03-01

    The aim of this study was to evaluate the self-aligning overdenture attachment system by comparing its oral health-related quality of life (OHRQL) with a traditionally used ball attachment system. In this randomized, within-subject crossover trial, 25 edentulous subjects each received 2 mandibular implants, and were then assigned to receive either self-aligning or traditional ball attachments. After 3 months, all subjects were switched to the second attachment type. The OHRQL was evaluated for both of the treatments using the short form of the Oral Health Impact Profile (OHIP-14). A subanalysis among subjects with below-average space available for attachment placement was also performed. Wilcoxon signed-rank test was used to compare differences between groups. Scores on the OHIP-14 physical disability domain were significantly better for the self-aligning attachment system (P  =  .049). Among subjects with below-average attachment space, functional limitation, psychological discomfort, physical disability, psychological disability, and total OHIP-14, scores were significantly better for the self-aligning attachment system (P  =  .041, P  =  .047, P  =  .048, P  =  .026, and P  =  .005, respectively). The self-aligning attachment system for 2-implant-retained mandibular overdentures is equal or superior to traditional ball attachments in all domains of the OHIP-14.

  20. Developing an Intelligent Table Tennis Umpiring System: Identifying the ball from the scene

    OpenAIRE

    Wong, Patrick K. C.

    2008-01-01

    This paper reports further development of an intelligent table tennis umpiring system, of which the idea and plan was previously published at this conference in 2007. Briefly, table tennis is a fast sport. A service usually takes a few seconds to complete but an umpire needs to make many observations and makes a judgment before or soon after the service is complete. This is a complex task and the author believes the employment of videography, image processing and artificial intelligence (AI) ...

  1. Birth of ball lightning

    Science.gov (United States)

    Lowke, J. J.; Smith, D.; Nelson, K. E.; Crompton, R. W.; Murphy, A. B.

    2012-10-01

    Many observations of ball lightning report a ball of light, about 10 cm in diameter, moving at about walking speed, lasting up to 20 s and frequently existing inside of houses and even aeroplanes. The present paper reports detailed observations of the initiation or birth of ball lightning. In two cases, navigation crew of aircraft saw ball lightning form at the windscreen inside the cockpit of their planes. In the first case, the ball lightning occurred during a thunderstorm, with much lightning activity outside of the plane. In the second case, large "horns" of electrical corona were seen outside of the plane at the surface of the radome, just prior to the formation of the ball lightning. A third case reports ball lightning formed inside of a house, during a thunderstorm, at a closed glass window. It is proposed, based on two-dimensional calculations of electron and ion transport, that ball lightning in these cases is driven and formed by atmospheric ions impinging and collecting on the insulating surface of the glass or Perspex windows. This surface charge can produce electric fields inside of the cockpit or room sufficient to sustain an electric discharge. Charges of opposite sign to those outside of the window accumulate on the inside surface of the glass, leaving a ball of net charge moving inside of the cockpit or room to produce a pulsed discharge on a microsecond time scale.

  2. The spinning ball spiral

    Science.gov (United States)

    Dupeux, Guillaume; Le Goff, Anne; Quéré, David; Clanet, Christophe

    2010-09-01

    We discuss the trajectory of a fast revolving solid ball moving in a fluid of comparable density. As the ball slows down owing to drag, its trajectory follows an exponential spiral as long as the rotation speed remains constant: at the characteristic distance L where the ball speed is significantly affected by the drag, the bending of the trajectory increases, surprisingly. Later, the rotation speed decreases, which makes the ball follow a second kind of spiral, also described in the paper. Finally, the use of these highly curved trajectories is shown to be relevant to sports.

  3. Sonographic detection of intrarenal and intraarterial fungus balls in a preterm infant due to systemic candidiasis

    International Nuclear Information System (INIS)

    Reither, M.; Schumacher, R.; Hagel, K.J.; Hering, F.

    1983-01-01

    Shortly after birth a preterm infant suffering from aspiration syndrome and subsequent Pseudomonas aeruginosa sepsis showed signs of renal insufficiency and mycotic infection: Yeast cells were identified in several urinalyses; there was also an increasing anti-Candida IgM antibody titer. At the same time sonographic examinations revealed an increasing echogenicity of the renal cortex and echogenic masses of variable size which did not cause acoustic shadows in both enlarged kidneys. A few days later, we found a right-sided hydronephrosis caused by an intraureteric prevesical mass of equal echogenicity. As we could observe sonographically, the aggressive antimycotic therapy was successful. Eleven weeks later there were signs of cardiac insufficiency. An angiographically demonstrated filling defect within the pulmonary artery showed the same sonographic findings as the previously found intrarenal masses. The baby underwent embolectomy and recovered. The thrombotic material contained yeast cells giving evidence of systemic Candidasis. Provided appropriate equipment is available, ultrasound today is an excellent non-invasive screening and followup method not only for echoencephalography, but also for more complicated neonatologic problems as seen here. The detailed observation of a changing echogenicity of the renal cortex and pelvis is important and often allows a decisive diagnostic clue before other radiological methods become conclusive. (orig.) [de

  4. The principal time balls of New Zealand

    Science.gov (United States)

    Kinns, Roger

    2017-04-01

    Accurate time signals in New Zealand were important for navigation in the Pacific. Time balls at Wellington and Lyttelton were noted in the 1880 Admiralty list of time signals, with later addition of Otago. The time ball service at Wellington started in March 1864 using the first official observatory in New Zealand, but there was no Wellington time ball service during a long period of waterfront redevelopment during the 1880s. The time ball service restarted in November 1888 at a different harbour location. The original mechanical apparatus was used with a new ball, but the system was destroyed by fire in March 1909 and was never replaced. Instead, a time light service was inaugurated in 1912. The service at Lyttelton, near Christchurch, began in December 1876 after construction of the signal station there. It used telegraph signals from Wellington to regulate the time ball. By the end of 1909, it was the only official time ball in New Zealand, providing a service that lasted until 1934. The Lyttelton time ball tower was an iconic landmark in New Zealand that had been carefully restored. Tragically, the tower collapsed in the 2011 earthquakes and aftershocks that devastated Christchurch. A daily time ball service at Port Chalmers, near Dunedin, started in June 1867, initially using local observatory facilities. The service appears to have been discontinued in October 1877, but was re-established in April 1882 as a weekly service, with control by telegraph from Wellington. The service had been withdrawn altogether by the end of 1909. Auckland never established a reliable time ball service, despite provision of a weekly service for mariners by a public-spirited citizen between August 1864 and June 1866. A time ball was finally installed on the Harbour Board building in 1901, but the signal was unreliable and it ceased in 1902. Complaints from ships' masters led to various proposals to re-establish a service. These concluded with erection of a time ball on the new

  5. Investigation of physical properties and stability of indomethacin-cimetidine and naproxen-cimetidine co-amorphous systems prepared by quench cooling, coprecipitation and ball milling.

    Science.gov (United States)

    Lim, Ai Wei; Löbmann, Korbinian; Grohganz, Holger; Rades, Thomas; Chieng, Norman

    2016-01-01

    The objective was to characterize the structural behaviour of indomethacin-cimetidine and naproxen-cimetidine co-amorphous systems (1 : 1 molar ratio) prepared by quench cooling, co-evaporation and ball milling. Powder X-ray diffraction (PXRD) and DSC were used to characterise the samples. Structural relaxation (i.e. molecular mobility) behaviour was obtained from the Kohlrausch-Williams-Watts (KWW) relationship. A glass transition temperature (Tg ), on average 20 °C higher than the predicted Tg (calculated from the Fox equation), was observed in all samples. The structural relaxation was dependent on the preparative methods. At a storage temperature of 40 °C, a comparatively higher molecular mobility was observed in indomethacin-cimetidine samples prepared by ball milling (ln τ(β) = 0.8), while similar molecular mobility was found for the same sample prepared by quench cooling (ln τ(β) = 2.4) and co-evaporation (ln τ(β) = 2.5). In contrast, molecular mobility of the naproxen-cimetidine samples followed the order co-evaporation (ln τ(β) = 0.8), quench cooling (ln τ(β) = 1.6) and ball milling (ln τ(β) = 1.8). The estimated relaxation times by the DSC-KWW method suggest that different preparative methods resulted in a variation of structural characteristics. Despite the differences in molecular mobility, all sample remained co-amorphous for up to 7 months. © 2015 Royal Pharmaceutical Society.

  6. Investigation of physical properties and stability of indomethacin-cimetidine and naproxen-cimetidine co-amorphous systems prepared by quench cooling, coprecipitation and ball milling

    DEFF Research Database (Denmark)

    Lim, Ai Wei; Löbmann, Korbinian; Grohganz, Holger

    2016-01-01

    OBJECTIVES: The objective was to characterize the structural behaviour of indomethacin-cimetidine and naproxen-cimetidine co-amorphous systems (1 : 1 molar ratio) prepared by quench cooling, co-evaporation and ball milling. METHODS: Powder X-ray diffraction (PXRD) and DSC were used to characterise....... The structural relaxation was dependent on the preparative methods. At a storage temperature of 40 °C, a comparatively higher molecular mobility was observed in indomethacin-cimetidine samples prepared by ball milling (ln τ(β) = 0.8), while similar molecular mobility was found for the same sample prepared...... by quench cooling (ln τ(β) = 2.4) and co-evaporation (ln τ(β) = 2.5). In contrast, molecular mobility of the naproxen-cimetidine samples followed the order co-evaporation (ln τ(β) = 0.8), quench cooling (ln τ(β) = 1.6) and ball milling (ln τ(β) = 1.8). CONCLUSION: The estimated relaxation times by the DSC...

  7. Great balls of fire

    Science.gov (United States)

    Stenhoff, Mark; reader01; jjherrera

    2014-03-01

    In reply to the physicsworld.com news article “Burning soil fuels ball lightning” (9 January, http://ow.ly/tl8aO) on evidence that a burning core of soil acts as an energy source for ball lightning.

  8. Ball Collision Experiments

    Science.gov (United States)

    Cross, R.

    2015-01-01

    Experiments are described on collisions between two billiard balls and between a bat and a ball. The experiments are designed to extend a student's understanding of collision events and could be used either as a classroom demonstration or for a student project.

  9. Punjab Ball Menu

    OpenAIRE

    Hobday, E, fl. 1905, artist

    2003-01-01

    A photograph of the exterior of a menu from the 'Punjab Ball'. The menu is decorated on both the inside and outside with illustrations by 'E. Hobday'. Inside the menu, in pen, is written: 'Lahore, Ball in Montgomery Hall, Nov 30th. 1905'.

  10. Middle finger and ball movements around ball release during baseball fastball pitching.

    Science.gov (United States)

    Matsuo, Tomoyuki; Jinji, Tsutomu; Hirayama, Daisaku; Nasu, Daiki; Ozaki, Hiroki; Kumagawa, Daisuke

    2017-02-28

    The objectives of this study were to investigate middle finger movements and dynamics of ball movements around the instant of ball release during baseball pitching. Baseball pitching from an indoor mound among 14 semi-professional pitchers was captured using a motion capture system with 16 high-speed cameras (1,000 Hz). Kinematics of middle finger joints, ball rotation, and force applied to the ball were calculated. The proximal and distal interphalangeal joints continued to extend until the instant of ball release, then abruptly flexed. The abrupt flexion lasted for only several milliseconds, followed by a short extension phase. The finger made a quick double cycle of extension-flexion movement, suggesting that it attained high stiffness resulting from co-contraction. The ball began to roll up to the tip of the finger 8 ± 1 ms before ball release owing to the start of extension or the increased angular velocity of extension for the proximal interphalangeal joint. A mean force of 195 ± 27 N was applied in the proximal direction of the hand at the same time as the beginning of ball rolling, and a mean force of 109 ± 22 N was applied to the throwing direction just before ball release.

  11. Ochrona prawa do prywatności a relacjonowanie przebiegu rozprawy głównej w polskim procesie karnym

    OpenAIRE

    Dobrzańska, Sara

    2016-01-01

    Przedmiotem artykułu jest problem ochrony prawa do prywatności w polskim procesie karnym w kontekście relacjonowania przebiegu rozprawy głównej przez media. Analizie zostały poddane zarówno warunki dopuszczalności relacjonowania rozprawy, przedmiot ingerencji, jak i podmioty, których prawo do prywatności może być naruszone w toku relacjonowania rozprawy głównej przez media. Prawo do prywatności jest współcześnie chronione nie tylko przez normy prawa cywilnego, ale również przez prawo konstytu...

  12. Development of a falling ball rheometer with applications to opaque systems: measurements of the rheology of suspensions of rods

    International Nuclear Information System (INIS)

    Powell, R.L.; Mondy, L.A.; Stoker, G.G.; Milliken, W.J.; Graham, A.L.

    1989-01-01

    With falling ball rheometry, we have measured the apparent relative viscosity of suspensions of large, neutrally buoyant, rigid rods in a viscous Newtonian fluid, while approximately maintaining the rods in a randomly oriented configuration. A new technique for measuring the time of flight of a ball between two positions is used. This computerized technique, based upon an eddy current detector, enables us to determine the position of a metallic (nonmagnetic) ball falling through an opaque suspension, with high accuracy (less than 1.5% error). The rods for the suspensions had a nominal aspect ratio of 10 and experiments were carried out at a single volume fraction, 0.05. Two populations of rods were used to having nominal diameters of 1.5875 mm and 3.175 mm. To within the errors of these experiments, suspensions from both populations had the same relative viscosity, with the overall average being 1.457. This viscosity was significantly different from that of a similar suspension (volume fraction=0.05) of rods of nominal aspect ratio 20 and it agreed well with theoretical results for the viscosity of a dilute suspension of randomly oriented rods

  13. Compact Q-balls

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D., E-mail: bazeia@fisica.ufpb.br [Departamento de Física, Universidade Federal da Paraíba, 58051-970 João Pessoa, PB (Brazil); Losano, L.; Marques, M.A. [Departamento de Física, Universidade Federal da Paraíba, 58051-970 João Pessoa, PB (Brazil); Menezes, R. [Departamento de Ciências Exatas, Universidade Federal da Paraíba, 58297-000 Rio Tinto, PB (Brazil); Departamento de Física, Universidade Federal de Campina Grande, 58109-970 Campina Grande, PB (Brazil); Rocha, R. da [Centro de Matemática, Computação e Cognição, Universidade Federal do ABC, 09210-580 Santo André (Brazil)

    2016-07-10

    In this work we deal with non-topological solutions of the Q-ball type in two space–time dimensions, in models described by a single complex scalar field that engenders global symmetry. The main novelty is the presence of stable Q-balls solutions that live in a compact interval of the real line and appear from a family of models controlled by two distinct parameters. We find analytical solutions and study their charge and energy, and show how to control the parameters to make the Q-balls classically and quantum mechanically stable.

  14. BALL - biochemical algorithms library 1.3

    Directory of Open Access Journals (Sweden)

    Stöckel Daniel

    2010-10-01

    Full Text Available Abstract Background The Biochemical Algorithms Library (BALL is a comprehensive rapid application development framework for structural bioinformatics. It provides an extensive C++ class library of data structures and algorithms for molecular modeling and structural bioinformatics. Using BALL as a programming toolbox does not only allow to greatly reduce application development times but also helps in ensuring stability and correctness by avoiding the error-prone reimplementation of complex algorithms and replacing them with calls into the library that has been well-tested by a large number of developers. In the ten years since its original publication, BALL has seen a substantial increase in functionality and numerous other improvements. Results Here, we discuss BALL's current functionality and highlight the key additions and improvements: support for additional file formats, molecular edit-functionality, new molecular mechanics force fields, novel energy minimization techniques, docking algorithms, and support for cheminformatics. Conclusions BALL is available for all major operating systems, including Linux, Windows, and MacOS X. It is available free of charge under the Lesser GNU Public License (LPGL. Parts of the code are distributed under the GNU Public License (GPL. BALL is available as source code and binary packages from the project web site at http://www.ball-project.org. Recently, it has been accepted into the debian project; integration into further distributions is currently pursued.

  15. Formation of ball lightning

    Energy Technology Data Exchange (ETDEWEB)

    Silberg, P.A. (2833 Lawton Drive, Amarillo, Texas (USA))

    A plasma continuum model for the formation of ball lightning is developed based on a substantial number of reports that the ball is often in the discharge column of a previous lightning stroke. The usual method of setting up the plasma equation for a one-component electron plasma is used. An approximate equation for the plasma is derived from the describing equation which is then solved exactly in terms of the Jacobi elliptic functions. The formation of the ball is based on a nonlinearity of the plasma equation which under certain circumstances permits the field to collapse into a small region. This collapse is interpreted to be ball lightning. The approximate equation derived for the plasma has the same form as a previous equation used to describe the formation of the fireball plasma.

  16. Fiber ball imaging.

    Science.gov (United States)

    Jensen, Jens H; Russell Glenn, G; Helpern, Joseph A

    2016-01-01

    By modeling axons as thin cylinders, it is shown that the inverse Funk transform of the diffusion MRI (dMRI) signal intensity obtained on a spherical shell in q-space gives an estimate for a fiber orientation density function (fODF), where the accuracy improves with increasing b-value provided the signal-to-noise ratio is sufficient. The method is similar to q-ball imaging, except that the Funk transform of q-ball imaging is replaced by its inverse. We call this new approach fiber ball imaging. The fiber ball method is demonstrated for healthy human brain, and fODF estimates are compared to diffusion orientation distribution function (dODF) approximations obtained with q-ball imaging. The fODFs are seen to have sharper features than the dODFs, reflecting an enhancement of the higher degree angular frequencies. The inverse Funk transform of the dMRI signal intensity data provides a simple and direct method of estimating a fODF. In addition, fiber ball imaging leads to an estimate for the ratio of the fraction of MRI visible water confined to the intra-axonal space divided by the square root of the intra-axonal diffusivity. This technique may be useful for white matter fiber tractography, as well as other types of microstructural modeling of brain tissue. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. DESIGNING AND EFFICIENCY EFFECT OF AUTOMATIC BALL-CLEANING SYSTEM FOR CONDENSER 180-KTsS-1 OF TURBINE Т-180/210-130-1 LMZ. Part 1

    Directory of Open Access Journals (Sweden)

    Yu. A. Zenovich-Leshkevich-Ol’pinskiy

    2015-01-01

    Full Text Available In order to reduce losses in the cooling source (condenser and to increase effectiveness of fuel-and-power resources utilization, the authors present a modern automatic ball-cleaning system for the pipes of condenser 180-KTsS-1 of turbine unit Т-180/210-130-1 LMZ of Gomel CHP-2. The article examines exploitation challenges of the steam turbine condensers and methods of clearing them from sedimentations. Depending on the sedimentation character and composition, and the quality of cooling water at the power plant, they apply various methods of the condenser tubes clearing: heat drying, vacuum dehydration, acid-washing, pipes-shooting with water and water-air pistols, ablution with high-pressure water jet etc. All the applied cleaning methods are the periodical means to fight the sedimentations and require the turbine halting or unloading, predetermine the equipment operating between clearings with constantly smearing cooling surfaces of the condensers, i.e. with reduced efficiency of equipment operation.The installation of the ball-cleaning system practically excludes defects of the chemical and mechanical cleaning methods, which leads to the condenser pipes life-in-service increase, the full-flow condensate quality improvement, reliability and efficient performance enhancement of the steam turbines equipment. The authors consider developed algorithms of data processing and designed system control of the condenser cleaning that allowed realizing its operation in automatic mode.

  18. Ball lightning burn.

    Science.gov (United States)

    Selvaggi, Gennaro; Monstrey, Stan; von Heimburg, Dennis; Hamdi, Mustapha; Van Landuyt, Koen; Blondeel, Phillip

    2003-05-01

    Ball lightning is a rare physical phenomenon, which is not yet completely explained. It is similar to lightning but with different, peculiar characteristics. It can be considered a mix of fire and electricity, concentrated in a fireball with a diameter of 20-cm that most commonly appears suddenly, even in indoor conditions, during a thunderstorm. It moves quickly for several meters, can change direction, and ultimately disappears. During a great storm, a 28-year-old man and his 5-year-old daughter sustained burn wounds after ball lightning came from the outdoors through a chimney. These two patients demonstrated signs of fire and electrical injuries. The father, who lost consciousness, sustained superficial second-degree burn wounds bilaterally on the zygomatic area and deep second-degree burn wounds on his right hand (total body surface area, 4%). His daughter demonstrated superficial second-degree burn wounds on the left part of the face and deep second-degree and third-degree burn wounds (total body surface area, 30%) on the left neck, both upper arms, and the back. In this article, the authors report the first two cases of burn injuries resulting from ball lightning contact indoors. The literature on this rare phenomenon is reviewed to elucidate the nature of ball lightning. Emphasis is placed on the nature of injuries after ball lightning contact, the therapy used, and the long-term complications.

  19. The bowling balls

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    10 November 1972: CERN’s Bent Stumpe places an order for 12 bowling balls for a total cost of 95 US dollars. Although not evident at first sight, he is buying the heart of some of the first tracking devices to be used in the SPS control room. Today, Bent Stumpe’s device would be called a desktop mouse…   The first order for 4 bowling balls later changed to 12 balls. The bowling balls became the heart of Bent Stumpe's mouse. Almost 40 years ago, the web, Wikipedia and Google did not exist and it was much more difficult to know whether other people in other parts of the world or even in the same laboratory were facing the same problems or developing the same tools. At that time, Bent Stumpe was an electronics engineer, newly recruited to work on developments for the SPS Central Control room. One of the things his supervisor asked him to build as soon as possible was a device to control a pointer on a screen, also called a tracker ball. The heart of the device was the...

  20. Construction of the Crystal Ball detector system and study of the helicity asymmetry in γp→pπ0π0

    International Nuclear Information System (INIS)

    Krambrich, D.

    2007-01-01

    Since spring 2004 the Crystal Ball Detector has been used for coincidence experiments probing the structure of the nucleons with real photons at the Mainzer Microtron. A major part of the commissioning, which was the first goal of this work, was the development and implementation of a new system for the Crystal Ball electronics. Components were designed or tested and, if necessary, modified to fit the experimental needs. After the commissioning, the set-up was then used successfully in several pion and eta production experiments for more than 2500 hours of beamtime. The second focus of this dissertation is the first measurement of the beam helicity asymmetry I s un in photoproduction of two neutral pions. The understanding of the excitation spectra of the nucleon requires experiments using polarised photons and/or polarised targets. Models based on different assumptions do reproduce the quantities measured without polarisation equally well but differ in the prediction of polarisation observables. The determination of more sensitive quantities is therefore mandatory. In contrast to single meson production, an observable appears in double pion production when using circularly polarized photons incident on an unpolarized target. This observable was determined as a function of energy and angle in the reactions γ p → p π 0 π 0 and in γ p → p π + π - . The results differ significantly from the model predictions. (orig.)

  1. Ball game popularity

    OpenAIRE

    Gregorič, Vanja

    2011-01-01

    In the diploma thesis I present ball games and how they are popular among children of 4th and 5th form of primary school. Sport activities play an important role when growing up and it is up to adults to provide children a certain amount of exercise in the pre-school period and during their schooling. It is important that one considers child's age and that the activities are represented through playing. Ball games are included in the curriculum in one of the sets in the first three years. In ...

  2. Microstructures and Dehydrogenation Properties of Ball-milled MgH2-K2Ti6O13-Ni Composite Systems

    Directory of Open Access Journals (Sweden)

    ZHANG Jian

    2016-11-01

    Full Text Available The K2Ti6O13 whisker separate-doped and K2Ti6O13 whisker and Ni powder multi-doped MgH2 hydrogen storage composite systems were prepared by mechanical milling method. The microstructures and dehydrogenation properties of the prepared samples were characterized by some testing methods such as X-ray diffraction (XRD, scanning electron microscope (SEM and differential scanning calorimeter (DSC. The results show that the K2Ti6O13 whisker not only plays the roles in refining the MgH2 crystalline grain, but also inhibit the agglomeration of MgH2 particles in K2Ti6O13 whisker separate-doped system, which results in the decreased dehydrogenation temperature of MgH2 matrix. When the mass ratio of K2Ti6O13 to MgH2 is 3:7, the improvement effect on dehydrogenation properties of MgH2 is the most remarkable. As compared with pure ball-milled MgH2, the dehydrogenation temperature of MgH2 in K2Ti6O13 whisker separate-doped system is decreased by nearly 75℃. For K2Ti6O13 whisker and Ni powder multi-dopedsystem, the dehydrogenation temperature of MgH2 matrix is further decreased compared to K2Ti6O13 whisker separate-doped one due to the dual effects of refined MgH2 crystalline grain by K2Ti6O13 whisker and destabilized MgH2 lattice by Ni solution. As compared with pure ball-milled MgH2, the dehydrogenation temperature of MgH2 in K2Ti6O13 whisker and Ni powder multi-doped system is decreased by nearly 87℃.

  3. Laboratory demonstration of ball lightning

    Energy Technology Data Exchange (ETDEWEB)

    Egorov, Anton I; Stepanov, Sergei I; Shabanov, Gennadii D [B.P. Konstantinov St. Petersburg Institute of Nuclear Physics, Russian Academy of Sciences, Gatchina, Leningrad region, Rusian Federation (Russian Federation)

    2004-01-31

    A common laboratory facility for creating glowing flying plasmoids akin to a natural ball lightning, allowing a number of experiments to be performed to investigate the main properties of ball lightning, is described. (methodological notes)

  4. Thermodynamic Processes Involving Liquefied Natural Gas at the LNG Receiving Terminals / Procesy termodynamiczne z wykorzystaniem skroplonego gazu ziemnego w terminalach odbiorczych LNG

    Science.gov (United States)

    Łaciak, Mariusz

    2013-06-01

    The increase in demand for natural gas in the world, cause that the production of liquefied natural gas (LNG) and in consequences its regasification becoming more common process related to its transportation. Liquefied gas is transported in the tanks at a temperature of about 111K at atmospheric pressure. The process required to convert LNG from a liquid to a gas phase for further pipeline transport, allows the use of exergy of LNG to various applications, including for electricity generation. Exergy analysis is a well known technique for analyzing irreversible losses in a separate process. It allows to specify the distribution, the source and size of the irreversible losses in energy systems, and thus provide guidelines for energy efficiency. Because both the LNG regasification and liquefaction of natural gas are energy intensive, exergy analysis process is essential for designing highly efficient cryogenic installations. Wzrost zapotrzebowania na gaz ziemny na świecie powoduje, że produkcja skroplonego gazu ziemnego (LNG), a w konsekwencji jego regazyfikacja, staje się coraz bardziej powszechnym procesem związanym z jego transportem. Skroplony gaz transportowany jest w zbiornikach w temperaturze około 111K pod ciśnieniem atmosferycznym. Przebieg procesu regazyfikacji niezbędny do zamiany LNG z fazy ciekłej w gazową dla dalszego transportu w sieci, umożliwia wykorzystanie egzergii LNG do różnych zastosowań, między innymi do produkcji energii elektrycznej. Analiza egzergii jest znaną techniką analizowania nieodwracalnych strat w wydzielonym procesie. Pozwala na określenie dystrybucji, źródła i wielkości nieodwracalnych strat w systemach energetycznych, a więc ustalić wytyczne dotyczące efektywnego zużycia energii. Ponieważ zarówno regazyfikacja LNG jak i skraplanie gazu ziemnego są energochłonne, proces analizy egzergii jest niezbędny do projektowania wysoce wydajnych instalacji kriogenicznych.

  5. Development of a novel recycling system for waste cathode ray tube funnel glass based on the integration of nanoscale Fe0 with ball milling.

    Science.gov (United States)

    Wang, Chunfeng; Yao, Dan; Liu, Yang; Wu, Yufan; Shen, Jinyou

    2018-04-09

    A novel and effective system was developed for recycling cathode ray tube (CRT) funnel glass wastes. Initially, the combination of nanoscale Fe 0 with ball milling promoted lead transfer that was strongly encapsulated in the glass inner structure to the surface of funnel glass and/or adhere to iron substance due to the collapse of SiO bonds. This condition enhanced the dissolution of lead in the acid solution. A high lead extraction rate of 97.8% from funnel glass was achieved through nitric acid leaching by optimizing the operational parameters (Fe 0 /funnel glass mass ratio, 0.5:1; ball milling time; 72 h). Subsequently, lead sulfate, iron hydroxides, and sodium nitrate were gradually recovered from the acid leachate by using three simple operations, namely, sulfation, alkali neutralization, and salt evaporation. Meanwhile, the leaching results of short-term toxicity characteristic leaching (TCLP) and long-term multiple extraction procedures (MEP) clearly demonstrated that the residual high silica products (after acid leaching) had no impact on the environment and could be used to synthesize high value-added zeolites as raw materials. With the addition of Al sources, the complete conversion of high silica residues into high crystalline zeolites with high cation exchange capacity value was realized by applying an alkaline fusion method during the hydrothermal treatment. Furthermore, lead, NO - 3 , and SO 2- 4 concentrations of the resulting drainage were considerably lower than the relevant standard for surface water quality. Therefore, the proposed recycling system provided an eco-friendly and feasible technique for complete reutilization of obsolete CRT funnel glass. Copyright © 2018. Published by Elsevier Ltd.

  6. Plasma theory of ball lightning

    Energy Technology Data Exchange (ETDEWEB)

    Ostapenko, V.I.; Tolpygo, K.B.

    1984-02-01

    The high-energy density inside the ball lightning is due to existence of intense plasma oscillations and high kinetic and potential energy of electron gas which form a pulsating ball vibrating relative to the nearly stationary ionic ball. At sublight velocities of electrons one can neglect the processes of their scattering and recombination. One obtains a relation between parameters of the plasma ball from the condition of equality of excess pressure of ions and that of Madelung forces. The high lifetime of the ball lighting is connected with small Landau damping for the longest wave vibrations.

  7. Computed Tomography Analysis of NASA BSTRA Balls

    Energy Technology Data Exchange (ETDEWEB)

    Perry, R L; Schneberk, D J; Thompson, R R

    2004-10-12

    Fifteen 1.25 inch BSTRA balls were scanned with the high energy computed tomography system at LLNL. This system has a resolution limit of approximately 210 microns. A threshold of 238 microns (two voxels) was used, and no anomalies at or greater than this were observed.

  8. Frictional performance of ball screw

    International Nuclear Information System (INIS)

    Nakashima, Katuhiro; Takafuji, Kazuki

    1985-01-01

    As feed screws, ball screws have become to be adopted in place of trapezoidal threads. The structure of ball screws is complex, but those are the indispensable component of NC machine tools and machining centers, and are frequently used for industrial robots. As the problems in the operation of ball screws, there are damage, life and the performance related to friction. As to the damage and life, though there is the problem of the load distribution on balls, the results of the research on rolling bearings are applied. The friction of ball screws consists of the friction of balls and a spiral groove, the friction of a ball and a ball, the friction in a ball-circulating mechanism and the viscous friction of lubricating oil. It was decided to synthetically examine the frictional performance of ball screws, such as driving torque, the variation of driving torque, efficiency, the formation of oil film and so on, under the working condition of wide range, using the screws with different accuracy and the nuts of various circuit number. The experimental setup and the processing of the experimental data, the driving performance of ball screws and so on are reported. (Kako, I.)

  9. Ball check valve

    International Nuclear Information System (INIS)

    Bevilacqua, F.

    1978-01-01

    A pressurized nuclear reactor having an instrument assembly sheathed in a metallic tube which is extended vertically upward into the reactor core by traversing a metallic guide tube which is welded to the wall of the vessel is described. Sensors in each instrument assembly are connected to instruments outside the vessel to manifest the conditions within the core. Each instrument assembly probe is moved into position within a metallic guide channel. The guide channel penetrates the wall of the vessel and forms part of the barrier to the environment within the pressure vessel. Each channel includes a ball check valve which is opened by the instrument assembly probe when the probe passes through the valve. A ball valve element is moved from its seat by the probe to a position lateral of the bore of the channel and is guided to its seat along a sloped path within the valve body when the probe is removed. 5 claims, 3 figures

  10. Ball Lightning Investigations

    Science.gov (United States)

    Bychkov, V. L.; Nikitin, A. I.; Dijkhuis, G. C.

    Ball lightning (BL) researches' review and theoretical models of three different authors are presented. The general review covers investigations from 1838 until the present day, and includes a discussion on observation data, experimental modeling, and theoretical approaches. Section 6.1 is written by Bychkov and Nikitin; authors of the sections 6.2, 6.3 and 6.4 are, respectively, Bychkov, Nikitin and Dijkhuis.

  11. From a Ball Game to Incompleteness

    Indian Academy of Sciences (India)

    We present a ball game that can be continued as long as wewish. It looks as though the game would never end. But byapplying a result on trees, we show that the game nonethelessends in some finite number of moves. We then point out somedeep results on the natural number system connected withthe game.

  12. Wpływ leptyny i adiponektyny na procesy chondrogenezy i osteoblastogenezy – znaczenie w patogenezie reumatoidalnego zapalenia stawów

    Directory of Open Access Journals (Sweden)

    Urszula Skalska

    2011-04-01

    Full Text Available Leptyna i adiponektyna to klasyczne adipokiny produkowane przezbiałą tkankę tłuszczową. Mają one działanie plejotropowe; ich rolębada się w takich chorobach, jak reumatoidalne zapalenie stawówczy choroba zwyrodnieniowa stawów. Dotąd nie wiadomo, jakidokładnie wpływ wywierają one na procesy chondrogenezyi osteoblastogenezy. Te dwa procesy są bardzo istotne z punktuwidzenia reumatoidalnego zapalenia stawów, gdyż w chorobie tejdochodzi do destrukcji chrząstki i kości stawowej. Istotne jestokreślenie, jaką rolę odgrywają adipokiny w reumatoidalnymzapaleniu stawów oraz w jaki sposób wpływają na różnicowaniekomórek mezenchymalnych. W niniejszej pracy przedstawionoobecną wiedzę na temat roli adiponektyny i leptyny w procesachosteogenezy i chondrogenezy (tab. I i II.

  13. BLEACHING NEPTUNE BALLS

    Directory of Open Access Journals (Sweden)

    BONET Maria Angeles

    2014-05-01

    Full Text Available Posidonia Oceanic is a seaweed from Mediterranean Sea and it is more concentrated at the Balerian SEA. This implies the Valencian Community also. It forms vaste underwater meadows in the sea and are part of the Mediterranean ecosystem. It is a sea-grass specie with fruits and flowers. Leaves are ribbon-like and they grow in winter and at the end of summer some of them are separated and arrive to some sea line. Fuit is separated and can floate, it is known as “the olive of the sea” mainly in Italy, or as the Neptune Balls. As it can be used in different fields, it is is being studied in order ro have the precitice tests. Some authors have reported the manufacturing of fully bio-based comites with a gluten matrix by hot-press molding. And it has been considered as an effective insulator for building industry or even though to determine the presence of mercure in the Mediterranean sea some years ago. As many applications can be designed from that fibers, it has been considered to be bleached in order to used them in fashionable products. Consequently, its original brown color is not the most suitable one and it should be bleached as many other cellulosic fibers. The aim of this paper is to bleache neptune balls however, the inner fibers were not accessible at all and it implied not to bleach the inner fibers in the neptune ball. Further studiesd will consider bleaching the individualized fibers.

  14. Individual ball possession in soccer.

    Directory of Open Access Journals (Sweden)

    Daniel Link

    Full Text Available This paper describes models for detecting individual and team ball possession in soccer based on position data. The types of ball possession are classified as Individual Ball Possession (IBC, Individual Ball Action (IBA, Individual Ball Control (IBC, Team Ball Possession (TBP, Team Ball Control (TBC und Team Playmaking (TPM according to different starting points and endpoints and the type of ball control involved. The machine learning approach used is able to determine how long the ball spends in the sphere of influence of a player based on the distance between the players and the ball together with their direction of motion, speed and the acceleration of the ball. The degree of ball control exhibited during this phase is classified based on the spatio-temporal configuration of the player controlling the ball, the ball itself and opposing players using a Bayesian network. The evaluation and application of this approach uses data from 60 matches in the German Bundesliga season of 2013/14, including 69,667 IBA intervals. The identification rate was F = .88 for IBA and F = .83 for IBP, and the classification rate for IBC was κ = .67. Match analysis showed the following mean values per match: TBP 56:04 ± 5:12 min, TPM 50:01 ± 7:05 min and TBC 17:49 ± 8:13 min. There were 836 ± 424 IBC intervals per match and their number was significantly reduced by -5.1% from the 1st to 2nd half. The analysis of ball possession at the player level indicates shortest accumulated IBC times for the central forwards (0:49 ± 0:43 min and the longest for goalkeepers (1:38 ± 0:58 min, central defenders (1:38 ± 1:09 min and central midfielders (1:27 ± 1:08 min. The results could improve performance analysis in soccer, help to detect match events automatically, and allow discernment of higher value tactical structures, which is based on individual ball possession.

  15. Individual ball possession in soccer.

    Science.gov (United States)

    Link, Daniel; Hoernig, Martin

    2017-01-01

    This paper describes models for detecting individual and team ball possession in soccer based on position data. The types of ball possession are classified as Individual Ball Possession (IBC), Individual Ball Action (IBA), Individual Ball Control (IBC), Team Ball Possession (TBP), Team Ball Control (TBC) und Team Playmaking (TPM) according to different starting points and endpoints and the type of ball control involved. The machine learning approach used is able to determine how long the ball spends in the sphere of influence of a player based on the distance between the players and the ball together with their direction of motion, speed and the acceleration of the ball. The degree of ball control exhibited during this phase is classified based on the spatio-temporal configuration of the player controlling the ball, the ball itself and opposing players using a Bayesian network. The evaluation and application of this approach uses data from 60 matches in the German Bundesliga season of 2013/14, including 69,667 IBA intervals. The identification rate was F = .88 for IBA and F = .83 for IBP, and the classification rate for IBC was κ = .67. Match analysis showed the following mean values per match: TBP 56:04 ± 5:12 min, TPM 50:01 ± 7:05 min and TBC 17:49 ± 8:13 min. There were 836 ± 424 IBC intervals per match and their number was significantly reduced by -5.1% from the 1st to 2nd half. The analysis of ball possession at the player level indicates shortest accumulated IBC times for the central forwards (0:49 ± 0:43 min) and the longest for goalkeepers (1:38 ± 0:58 min), central defenders (1:38 ± 1:09 min) and central midfielders (1:27 ± 1:08 min). The results could improve performance analysis in soccer, help to detect match events automatically, and allow discernment of higher value tactical structures, which is based on individual ball possession.

  16. Two balls and a string: from ordered motion to chaos

    Science.gov (United States)

    Sacks, William; Mauger, Alain

    2013-11-01

    Two spherical balls are connected by a taught string passing through a small hole in a perfectly planar table: the first ball, subject to a central force, moves without friction on a two-dimensional plane, while the second ball moves only along the vertical axis directly below the hole. The pedagogical aspects of this novel two-body problem are given particular attention: Newton’s laws, central force motion, conservation laws, angular momentum, constraints, etc. The dynamics of the system is considered under various initial conditions wherein the ball on the table moves qualitatively in rotating ellipses or hypotrochoids. The conditions for closed or periodic orbits are examined. The more complex case of the inclined plane is then considered, revealing a rich variety of periodic, aperiodic and chaotic solutions as a function of the ball mass ratio and the plane inclination angle. The associated Poincaré phase-space maps are discussed.

  17. Modeling and Analyzing the Slipping of the Ball Screw

    Directory of Open Access Journals (Sweden)

    Nannan Xu

    Full Text Available AbstractThis paper aims to set up the ball systematic slipping model and analyze the slipping characteristics caused by different factors for a ball screw operating at high speeds. To investigate the ball screw slipping mechanism, transformed coordinate system should be established firstly. Then it is used to set up mathematical modeling for the ball slipping caused by the three main reasons and the speed of slipping can be calculated. Later, the influence of the contact angle, helix angle and screw diameter for ball screw slipping will be analyzed according to the ball slipping model and slipping speeds equation and the slipping analysis will be obtained. Finally, curve of slipping analysis and that of mechanical efficiency of the ball screw analysis by Lin are compared, which will indirectly verify the correctness of the slipping model. The slipping model and the curve of slipping analysis established in this paper will provide theory basis for reducing slipping and improving the mechanical efficiency of a ball screw operating at high speeds.

  18. Localized plasma balls

    Energy Technology Data Exchange (ETDEWEB)

    Figueras, Pau; Tunyasuvunakool, Saran [DAMTP, Centre for Mathematical Sciences,Wilberforce Road, Cambridge CB3 0WA (United Kingdom)

    2014-06-04

    In this paper we numerically construct localized black hole solutions in the IR end of the confining geometry of the AdS soliton, Witten’s early holographic model for confinement. These black holes should be thought of as finite size analogues of the domain wall solutions that have appeared previously in the literature. From the dual CFT point of view, these black holes correspond to finite size balls of deconfined plasma surrounded by the confining vacuum. The plasma ball solutions are parametrized by the temperature. For temperatures well above the deconfinement transition, the dual black holes are small and round and they are well-described by the asymptotically flat Schwarzschild solution. On the other hand, as the temperature approaches the deconfinement temperature, these these black holes spread out in the directions parallel to IR end of the space-time, whilst their extent in the holographic radial direction remains finite. In these new black hole backgrounds, we compute various probes of confinement/deconfinement such as temporal Wilson loops and entanglement entropy.

  19. Localized plasma balls

    International Nuclear Information System (INIS)

    Figueras, Pau; Tunyasuvunakool, Saran

    2014-01-01

    In this paper we numerically construct localized black hole solutions in the IR end of the confining geometry of the AdS soliton, Witten’s early holographic model for confinement. These black holes should be thought of as finite size analogues of the domain wall solutions that have appeared previously in the literature. From the dual CFT point of view, these black holes correspond to finite size balls of deconfined plasma surrounded by the confining vacuum. The plasma ball solutions are parametrized by the temperature. For temperatures well above the deconfinement transition, the dual black holes are small and round and they are well-described by the asymptotically flat Schwarzschild solution. On the other hand, as the temperature approaches the deconfinement temperature, these these black holes spread out in the directions parallel to IR end of the space-time, whilst their extent in the holographic radial direction remains finite. In these new black hole backgrounds, we compute various probes of confinement/deconfinement such as temporal Wilson loops and entanglement entropy

  20. Modeling on the Effect of Coal Loads on Kinetic Energy of Balls for Ball Mills

    Directory of Open Access Journals (Sweden)

    Yan Bai

    2015-07-01

    Full Text Available This paper presents a solution for the detection and control of coal loads that is more accurate and convenient than those currently used. To date, no research has addressed the use of a grinding medium as the controlled parameter. To improve the accuracy of the coal load detection based on the kinetic energy of balls in a tubular ball mill, a Discrete Element Method (DEM model for ball kinematics based on coal loads is proposed. The operating process for a ball mill and the ball motion, as influenced by the coal quality and the coal load, was analyzed carefully. The relationship between the operating efficiency of a coal pulverizing system, coal loads, and the balls’ kinetic energy was obtained. Origin and Matlab were utilized to draw the variation of parameters with increasing coal loads in the projectile and cascading motion states. The parameters include the balls’ real-time kinetic energy, the friction energy consumption, and the mill’s total work. Meanwhile, a method of balanced adjacent degree and a physical experiment were proposed to verify the considerable effect of the balls’ kinetic energy on coal loads. The model and experiment results indicate that a coal load control method based on the balls’ kinetic energy is therefore feasible for the optimized operation of a coal pulverizing system.

  1. The nonlinear and ball pass effects of a ball bearing on rotor vibration

    International Nuclear Information System (INIS)

    Han, D. C.; Choi, S. H.; Lee, Y. H.; Kim, K. H.

    1998-01-01

    A ball bearing is generally assumed as a linear spring in rotor dynamic analysis. In real case, the force equilibrium of the bearing is changed as the relative position of each ball with respect to the direction of radial force. So, the stiffness of the bearing is also changed and is a function of time and position. In this study, the nonlinear characteristics of a ball bearing are considered in analyzing the vibration response of a rotating shaft due to an unbalance force. A finite element method is used to analyze the vibration characteristics of a rotor-bearing system and a direct numerical integration is performed to calculate the transient response of the rotor system. The responses are converted to the frequency domain and the effects of the parametric excitation due to a ball bearing are examined. The test rig for the investigation of the effect of a ball bearing on the rotor vibration is set up and the results are compared with those of numerical calculation. The calculation results show that the amplitudes of the nonlinear model are larger than those of the linear one. The frequencies of the calculations can be matched to the measured frequencies

  2. Behaviour of a Bouncing Ball

    Science.gov (United States)

    Cross, Rod

    2015-01-01

    The bounce of a ball is a seemingly innocuous event that can be used to illustrate many aspects of elementary and even advanced mechanics. Both normal and oblique bounces on a rigid surface are considered in this article, emphasizing qualitative features of the bounce process. If the ball bounces at an oblique angle then it can slide throughout…

  3. Reflections on a Bouncing Ball

    Science.gov (United States)

    Rohr, Jim; Lopez, Veronica; Rohr, Tyler

    2014-01-01

    While observing the bounce heights of various kinds of sports balls dropped from different heights onto a variety of surfaces, we thought of the following question: Could measurements of drop and bounce heights of balls of different diameters, but of the same material, falling from different heights, but on the same surface, be expressed by a…

  4. Renal fungus ball: a challenging clinical problem.

    Science.gov (United States)

    Tan, Wei Phin; Turba, Ulku C; Deane, Leslie A

    2017-04-28

    We describe a case of renal pelvi-ureteric fungus ball managed with placement of two nephrostomy tubes and amphotericin B irrigation through a nephrostomy tube with the other to free drain. A 46-year-old man with uncontrolled Type 2 diabetes mellitus was referred to the urology clinic for workup of recurrent urinary tract infection. Urine culture grew Candida albicans. The patient was started on oral fluconazole therapy. Cystoscopy and cystogram revealed a grade 3 left vesicoureteral reflux and right retrograde pyelogram revealed a filling defect in the right renal pelvis extending into the proximal ureter with severe hydroureteronephrosis. Two nephrostomy tubes were placed (mid-pole and lower pole) to ensure that the system was not obstructed. Amphotericin B (50 mg/1000 ml normal saline) irrigation was then instilled through the mid-pole nephrostomy tube at a rate of 30 ml/h with the lower pole nephrostomy tube to free drain. An antegrade nephrostogram was performed after 5 days of amphotericin B instillation, showing complete resolution of the fungus ball. The patient is awaiting definitive minimally invasive management of the distal ureteral narrowing. Renal and pelvi-ureteric fungus ball is a challenging clinical entity. It must be addressed promptly and efficiently to be successful. We describe a minimally invasive approach that was tolerated well and resulted in complete clearance of the fungus ball in a relatively short time frame.

  5. Structure of laboratory ball lightning

    Science.gov (United States)

    Ito, Tsuyohito; Tamura, Tomoya; Cappelli, Mark A.; Hamaguchi, Satoshi

    2009-12-01

    Trajectories of self-sustained laboratory ball lightning, generated by arc discharges with silicon, are investigated for understanding the possibility of buoyant flight. Extremely low apparent densities are found, nearly approaching that of standard air. The freely buoyant balls are observed to survive for about 0.1 s, with significantly buoyant balls surviving for several seconds. These ball lightning objects are found to have a density and size that can easily allow them to be carried by a gentle breeze of a few meters per second. The results are interpreted by a model that is an extension of that first proposed by Abrahamson and Dinniss [J. Abrahamson and J. Dinniss, Nature (London) 403, 519 (2000)]. The buoyant behavior of ball lightning seen in our experiments is believed to arise as a result of the formation of a nanoparticle oxide network growing from a molten silicon core.

  6. Eddy Current Model of Ball Lightning

    OpenAIRE

    Shelton, J. D.

    2011-01-01

    Eddy Current Model of Ball Lightning Calculations show that high-energy ball lightning may consist of a ball of plasma containing a large circular electric current arising as an eddy current generated by lightning. Synthetic ball lightning might serve as a method of plasma confinement for purposes of nuclear fusion. In this paper, three articles concerning ball lightning and the related phenomenon of large ball lightning are combined to provide insight into this rarely glimpsed occurrence.

  7. Prediction of tar ball formation

    International Nuclear Information System (INIS)

    Khelifa, A.; Gamble, L.

    2006-01-01

    The presence of small tar balls ranging in size from less than a millimetre to 60 centimetres have been observed during cleanup assessment operations following accidental oil spills on water. The tar balls are composed of heavy oil residues and suspended particulate matter (SPM) from the water column. They can be found on shorelines, settled on the seafloor and floating at or near the water surface. Their abundance on the shorelines varies from site to site and depends on the conditions of the spill and mixing conditions. Aggregation between SPM and micro-sized oil droplets occurs naturally in coastal waters and enhances the dispersion of spilled oil. Although tar balls are among the important end states of spilled oil in the marine environment, no model exists to estimate the percentage of the spilled oil that becomes tar balls. This paper offered some insight into the modeling of tar ball formation. Current modeling understanding of oil-SPM aggregate formation was used to predict tar ball formation. The formation of oil droplets was examined with respect to a range of conditions under which the formation of large droplets is expected. The role of aggregation was then presented to demonstrate the effects of concentration and type of SPM on the buoyancy of tar balls. Good agreement was found between modeling results and field data reported in the literature regarding the size and density of tar balls. Oil viscosity and mixing energy were found to be the main factors controlling the formation of tar balls. The aggregation of tar balls with SPM and shoreline material results in significant increases or decreases in density, depending on the type and concentration of SPM. 42 refs., 2 tabs., 6 figs

  8. Crystal Ball at PEP

    International Nuclear Information System (INIS)

    Bartel, W.; Bulos, F.; Luke, D.; Peck, C.; Strauch, K.

    1975-01-01

    The modifications to the SPEAR version of the Crystal Ball required by the higher energies at PEP are discussed. Since the hadron multiplicity is expected to rise as log s, their average energy must rise. On the other hand, if the hadrons are produced in jets, the low energy part of their spectrum is not heavily depleted. This implies that modifications for high energy particles should not deteriorate low energy performance. An external iron calorimeter for measuring the high energy hadrons, charged and neutral, is considered. To improve the angular resolution on γ's, an active internal converter has been studied, estimates have been made of its expected performance, and difficulties requiring further study have been outlined

  9. Testing general relativity using a bouncing ball

    Directory of Open Access Journals (Sweden)

    Shiuan-Ni Liang

    2014-01-01

    Full Text Available In a recent article (Liang and Lan, (2011, we showed that the trajectories predicted by general-relativistic and Newtonian mechanics from the same parameters and initial conditions for a low-speed weak-gravity bouncing ball system will rapidly disagree completely if the trajectories are chaotic. Here, we determine how accurate the parameters and initial conditions of the system must be known so that the two different calculated chaotic trajectories are sufficiently accurate for an empirical test.

  10. Bringing Cinderella to the Ball: Constructing a Federal System of Technical and Further Education in Australia, 1971-1975

    Science.gov (United States)

    Rushbrook, Peter

    2010-01-01

    Australian vocational education has a history dating from the late eighteenth century. As Australian colonies and, later, federated states evolved each constructed its own version of vocational education provision. Generally the systems, consisting of community-based or state-controlled colleges for the training of operatives, apprenticeships and…

  11. Procesy evropské defragmentace jako inspirativní nástroj policymaking

    Directory of Open Access Journals (Sweden)

    Tomáš Váňa

    2013-08-01

    Full Text Available This paper looks at the different stages of European municipal defragmentation and at the diverse models that post-war countries have adopted for their municipal structures. It notes that defragmentation has been undertaken with little previous knowledge regarding the possible impacts of these approaches. Through applying the QCA method of analysis it looks at common and distinct features of these approaches and draws a sharp dichotomy between defragmentation trends in post-communist countries and countries of the Western bloc. By showing that there are trends intrinsic to post-communist political systems, this paper presents the idea that these systems can learn from errors made by countries that approached municipal defragmentation before them. Drawing on the example of the late-defragmenting Iceland, this paper shows how currently or prospectively defragmenting countries can learn from its experience. In the last part of the paper, suggestions are made with regard to how the Czech Republic can learn from this experience, particularly from democratic referendums, legislative and economic incentives, and municipal cooperation.

  12. Characterization of Ball Milled Al-Al2O3 sub-micron Composites

    Science.gov (United States)

    Dagasan, E.; Gercekcioglu, E.; Unalan, S.

    2018-01-01

    The purpose of this study is to investigate properties of the composite powders produced by ball milling process. Different weight ratio of high purity Al2O3 powders were added to the Al matrix as reinforcing element. Ball milling process was conducted by a planetary type ball mill with WC milling balls and vial at constant parameters like rotating speed, time, Ball-to-Powder ratio and Process Control Agent. Samples that taken from the powder mixtureby various time intervals were analyzed by SEM, XRD and BET surface area and porosity measurement systems.

  13. Unsolved Mystery of Ball Lightning

    Science.gov (United States)

    Bychkov, V. L.

    Ball lightning is an unusual phenomenon always drawing attention of people. There are still questions about its origination, features, interaction with environment, and phenomena related to it. On a way of studying this phenomenon, there are a lot of difficulties, the basic of them is insufficiency of authentic, scientific data. The chapter sets as the purpose to interest the reader in the problem, to describe conditions of ball lightning occurrence, theories, and its hypotheses explanation, to include readers in a circle of experimental searches in creation of a ball lightning and its analogues, and to describe fascination of a problem and difficulty of its solution.

  14. Real/binary co-operative and co-evolving swarms based multivariable PID controller design of ball mill pulverizing system

    International Nuclear Information System (INIS)

    Menhas, Muhammad Ilyas; Fei Minrui; Wang Ling; Qian Lin

    2012-01-01

    Highlights: ► We extend the concept of co-operation and co-evolution in some PSO variants. ► We use developed co-operative PSOs in multivariable PID controller design/tuning. ► We find that co-operative PSOs converge faster and give high quality solutions. ► Dividing the search space among swarms improves search efficiency. ► The proposed methods allow the practitioner for heterogeneous problem formulation. - Abstract: In this paper, multivariable PID controller design based on cooperative and coevolving multiple swarms is demonstrated. A simplified multi-variable MIMO process model of a ball mill pulverizing system with steady state decoupler is considered. In order to formulate computational models of cooperative and coevolving multiple swarms three different algorithms like real coded PSO, discrete binary PSO (DBPSO) and probability based discrete binary PSO (PBPSO) are employed. Simulations are carried out on three composite functions simultaneously considering multiple objectives. The cooperative and coevolving multiple swarms based results are compared with the results obtained through single swarm based methods like real coded particle swarm optimization (PSO), discrete binary PSO (DBPSO), and probability based discrete binary PSO (PBPSO) algorithms. The cooperative and coevolving swarms based techniques outperform the real coded PSO, PBPSO, and the standard discrete binary PSO (DBPSO) algorithm in escaping from local optima. Furthermore, statistical analysis of the simulation results is performed to calculate the comparative reliability of various techniques. All of the techniques employed are suitable for controller tuning, however, the multiple cooperative and coevolving swarms based results are considerably better in terms of mean fitness, variance of fitness, and success rate in finding a feasible solution in comparison to those obtained using single swarm based methods.

  15. SuperODS steels R and D for fuel cladding of next generation nuclear systems. 3) Development of high performance attrition type ball mill

    International Nuclear Information System (INIS)

    Okuda, T.; Fujiwara, M.; Nakai, T.; Shibata, K.; Kimura, A.; Inoue, Masaki; Ukai, S.; Ohnuki, S.; Fujisawa, T.; Abe, F.

    2009-01-01

    Oxygen content in ODS ferritic steel is the most important element to determine the mechanical properties. The oxygen contamination from the air is perfectly prevented by using new designed ball mill and the subsequent process control. Zr, Hf and Ti added ODS steels with three oxygen levels for the evaluation tests are fabricated. (author)

  16. Assessing the Impact of the Installation of a Community-Scale Closed-Loop Ground-Source Geothermal System on Underlying Aquifers: Ball State University, Muncie, IN

    Science.gov (United States)

    Neumann, K.; Dowling, C.; Florea, L.; Dunn, M.; Samuelson, A. C.; Lowe, J.

    2013-12-01

    Ball State University (BSU), located within the city of Muncie, Indiana, began installing the nation's largest ground-source geothermal project in 2009. Currently, BSU is burning over 20,000 tons of coal annually to satisfy heating and cooling demands of the school and is one of the largest emitters of CO2, SO2 and mercury in the city of Muncie and surrounding Delaware County. The elimination of coal burning will reduce aerial pollution by an estimated 1400 tons of SO2 and 4 pounds of mercury annually, once the system is fully operational. Currently, the groundsource geothermal system is being installed in Phases. Phase 1 includes 1803 400-ft deep geothermal boreholes that were drilled in a 15x15 ft grid in two large fields (North and South) in the northern part of campus. Two geothermal exchange loops were installed in each borehole to add or remove heat from the ground. BSU students and faculty collected hydrogeologic and temperature data from a series of groundwater monitoring wells, beginning Summer 2010. The installation of the second phase in the southern part of campus has commenced.. Despite the rise in community-scale ground-source geothermal energy systems, there is very little empirical information on their effects upon the groundwater environment, or, vice versa, of the effects of the groundwater flow pattern on the geothermal field. Previous studies have triggered concern over the impact of large-scale geothermal systems where increases in groundwater temperatures were documented. We will demonstrate how, since BSU initiated Phase 1 in late November 2011 with cold-water circulation (adding heat to the ground), the temperature increased over 10 degrees Celsius in the center of the South Field, with temperatures rising in other surrounding monitoring wells depending on groundwater movement and their distance from the edge of the geothermal boreholes. The temperature increases are distinctively different in the upper highly hydraulically conductive

  17. Sonographic detection of intrarenal and intra-arterial fungus balls in a preterm infant due to systemic candidiasis

    Energy Technology Data Exchange (ETDEWEB)

    Reither, M.; Schumacher, R.; Hagel, K.J.; Hering, F.

    1983-10-01

    Shortly after birth a preterm infant suffering from aspiration syndrome and subsequent Pseudomonas aeruginosa sepsis showed signs of renal insufficiency and mycotic infection: yeast cells were identified in several urinalyses; there was also an increasing anti-candida IgM antibody titer. At the same time sonographic examinations revealed an increasing echogenicity of the renal cortex and echogenic masses of variable size which did not cause acoustic shadows in both enlarged kidneys. A few days later, we found a right-sided hydronephrosis caused by an intraureteric prevesical mass of equal echogenicity. As we could observe sonographically, the aggressive antimycotic therapy was successful. Eleven weeks later there were signs of cardiac insufficiency. An angiographically demonstrated filling defect, within the pulmonary artery, showed the same sonographic findings as the previously found intrarenal masses. The baby underwent embolectomy and recovered. The thrombotic material contained yeast cells giving evidence of systemic candidasis. Provided appropriate equipment is available, ultrasound today is an excellent non-invasive screening and followup method not only for echoencephalography, but also for more complicated neonatologic problems as seen here. The detailed observation of a changing echogenicity of the renal cortex and pelvis is important and often allows a decisive diagnostic clue before other radiological methods become conclusive.

  18. INVESTIGATION OF ANGULAR BALL BEARING WEAR

    Directory of Open Access Journals (Sweden)

    A. L. Savchenko

    2006-01-01

    Full Text Available Wearing process of balls in an angular ball bearing has been investigated in the paper. Force affecting a separator from the side of balls is determined theoretically. Wear rate may be calculated with a formula for abrasive wear while substituting numerical parameter values of the investigated ball bearing for formula symbols.

  19. Inscribed Balls and Their Centers

    Science.gov (United States)

    Balashov, M. V.

    2017-12-01

    A ball of maximal radius inscribed in a convex closed bounded set with a nonempty interior is considered in the class of uniformly convex Banach spaces. It is shown that, under certain conditions, the centers of inscribed balls form a uniformly continuous (as a set function) set-valued mapping in the Hausdorff metric. In a finite-dimensional space of dimension n, the set of centers of balls inscribed in polyhedra with a fixed collection of normals satisfies the Lipschitz condition with respect to sets in the Hausdorff metric. A Lipschitz continuous single-valued selector of the set of centers of balls inscribed in such polyhedra can be found by solving n + 1 linear programming problems.

  20. Construction of the Crystal Ball detector system and study of the helicity asymmetry in {gamma}p{yields}p{pi}{sup 0}{pi}{sup 0}; Aufbau des Crystal Ball-Detektorsystems und Untersuchung der Helizitaetsasymmetrie in {gamma} p {yields} p {pi}{sup 0} {pi}{sup 0}

    Energy Technology Data Exchange (ETDEWEB)

    Krambrich, D.

    2007-01-15

    Since spring 2004 the Crystal Ball Detector has been used for coincidence experiments probing the structure of the nucleons with real photons at the Mainzer Microtron. A major part of the commissioning, which was the first goal of this work, was the development and implementation of a new system for the Crystal Ball electronics. Components were designed or tested and, if necessary, modified to fit the experimental needs. After the commissioning, the set-up was then used successfully in several pion and eta production experiments for more than 2500 hours of beamtime. The second focus of this dissertation is the first measurement of the beam helicity asymmetry I{sup s}un in photoproduction of two neutral pions. The understanding of the excitation spectra of the nucleon requires experiments using polarised photons and/or polarised targets. Models based on different assumptions do reproduce the quantities measured without polarisation equally well but differ in the prediction of polarisation observables. The determination of more sensitive quantities is therefore mandatory. In contrast to single meson production, an observable appears in double pion production when using circularly polarized photons incident on an unpolarized target. This observable was determined as a function of energy and angle in the reactions {gamma} p {yields} p {pi}{sup 0} {pi}{sup 0} and in {gamma} p {yields} p {pi}{sup +} {pi}{sup -}. The results differ significantly from the model predictions. (orig.)

  1. LHC gets the ball rolling

    CERN Multimedia

    2007-01-01

    A technique involving a small ball with a transmitter embedded inside it has been successfully tested in Sector 7-8. The ball is sent through the LHC beam pipes to check the LHC interconnections. The multidisciplinary team responsible for the RF ball project to check the interconnections. From left to right: Rhodri Jones (AB/BI), Eva Calvo (AB/BI), Francesco Bertinelli (AT/MCS), Sonia Bartolome Jimenez (TS/IC), Sylvain Weisz (TS/IC), Paul Cruikshank (AT/VAC), Willemjan Maan (AT/VAC), Alain Poncet (AT/MCS), Marek Gasior (AB/BI). During the tests the ball is inserted very carefully into the vacuum chamber.A game of ping-pong at the LHC? On 13 September a rather unusual test was carried out in Sector 7-8 of the accelerator. A ball just a bit smaller than a ping-pong ball was carefully introduced into one of the accelerator’s two vacuum pipes, where it travelled 800 metres in the space of a few mi...

  2. Mechanical intermixing of components in (CoMoNi)-based systems and the formation of (CoMoNi)/WC nanocomposite layers on Ti sheets under ball collisions

    Science.gov (United States)

    Romankov, S.; Park, Y. C.; Shchetinin, I. V.

    2017-11-01

    Cobalt (Co), molybdenum (Mo), and nickel (Ni) components were simultaneously introduced onto titanium (Ti) surfaces from a composed target using ball collisions. Tungsten carbide (WC) balls were selected for processing as the source of a cemented carbide reinforcement phase. During processing, ball collisions continuously introduced components from the target and the grinding media onto the Ti surface and induced mechanical intermixing of the elements, resulting in formation of a complex nanocomposite structure onto the Ti surface. The as-fabricated microstructure consisted of uniformly dispersed WC particles embedded within an integrated metallic matrix composed of an amorphous phase with nanocrystalline grains. The phase composition of the alloyed layers, atomic reactions, and the matrix grain sizes depended on the combination of components introduced onto the Ti surface during milling. The as-fabricated layer exhibited a very high hardness compared to industrial metallic alloys and tool steel materials. This approach could be used for the manufacture of both cemented carbides and amorphous matrix composite layers.

  3. Searching for Q-balls with HAWC

    Science.gov (United States)

    Karn, Peter

    2013-04-01

    The High Altitude Water Cherenkov (HAWC) Observatory is a gamma-ray experiment currently under construction at Sierra Negra in the state of Puebla, Mexico. Once completed, it will consist of a 20,000 square meter array of 300 water Cherenkov detectors. Although the HAWC Observatory is designed to study gamma rays from galactic and extra-galactic sources, the large instrumented volume of water gives the opportunity to search for more exotic species. One such target, predicted by several varieties of supersymmetric theory, is the Q-ball. Q-balls are very massive, sub-relativistic particles that can have a large baryon number, and can be stable since their creation in the early universe. They are also an appealing candidate for the dark matter of the universe, but their large masses must mean that their flux is very low. The data acquisition system of the HAWC Observatory is flexible enough that, with a dedicated trigger algorithm for non-relativistic particles, it allows the search for Q-balls traversing the detector. The trigger algorithm and preliminary analysis will be presented.

  4. Physical nature of ball lightning

    Energy Technology Data Exchange (ETDEWEB)

    Stakhanov, I.P.

    1979-01-01

    An analysis is made of results obtained from the observations of ball lightning. Principal attention is given to data obtained during the last two decades. A brief critique is also offered on hypotheses about its origin. A more detailed presentation is made of the cluster hypothesis according to which ball lightning consists of complex compounds of ions and neutral molecules. The book is intended for a broad spectrum of readers, but is particularly directed toward those with a knowledge of physics and chemistry. 70 references, 24 figures, 17 tables.

  5. Ball lightning risk to aircraft

    Science.gov (United States)

    Doe, R.; Keul, A.

    2009-04-01

    Lightning is a rare but regular phenomenon for air traffic. Aircraft are designed to withstand lightning strikes. Research on lightning and aircraft can be called detailed and effective. In the last 57 years, 18 reported lightning aviation disasters with a fatality figure of at least 714 persons occurred. For comparison, the last JACDEC ten-year average fatality figure was 857. The majority encountered lightning in the climb, descent, approach and/or landing phase. Ball lightning, a metastable, rare lightning type, is also seen from and even within aircraft, but former research only reported individual incidents and did not generate a more detailed picture to ascertain whether it constitutes a significant threat to passenger and aircraft safety. Lacking established incident report channels, observations were often only passed on as "air-travel lore". In an effort to change this unsatisfactory condition, the authors have collected a first international dataset of 38 documented ball lightning aircraft incidents from 1938 to 2001 involving 13 reports over Europe, 13 over USA/Canada, and 7 over Russia. 18 (47%) reported ball lightning outside the aircraft, 18 (47%) inside, 2 cases lacked data. 8 objects caused minor damage, 8 major damage (total: 42%), only one a crash. No damage was reported in 18 cases. 3 objects caused minor crew injury. In most cases, ball lightning lasted several seconds. 11 (29%) incidents ended with an explosion of the object. A cloud-aircraft lightning flash was seen in only 9 cases (24%) of the data set. From the detailed accounts of air personnel in the last 70 years, it is evident that ball lightning is rarely, but consistently observed in connection with aircraft and can also occur inside the airframe. Reports often came from multiple professional witnesses and in several cases, damages were investigated by civil or military authorities. Although ball lightning is no main air traffic risk, the authors suggest that incident and accident

  6. Biomechanical predictors of ball velocity during punt kicking in elite rugby league kickers

    OpenAIRE

    Sinclair, Jonathan Kenneth; Taylor, Paul John; Atkins, Stephen; Hobbs, Sarah Jane

    2016-01-01

    Punt kicking is integral to the attacking and defensive elements of rugby league and the ability to kick the ball with high\\ud velocity is desirable. This study aimed to identify important technical aspects of kicking linked to the generation of ball\\ud velocity. Maximal punt kicks were obtained from six elite rugby league kickers using a 10-camera motion capture system.\\ud Three-dimensional kinematics of the lower extremities was obtained. Regression analysis with ball velocity as criterion\\...

  7. Solvent-free and time-efficient Suzuki-Miyaura reaction in a ball mill: the solid reagent system KF-Al(2)O(3) under inspection.

    Science.gov (United States)

    Bernhardt, Franziska; Trotzki, Ronald; Szuppa, Tony; Stolle, Achim; Ondruschka, Bernd

    2010-01-22

    Although a plethora of synthetic procedures mediated by KF-loaded aluminas is available in the literature, there is almost no data concerning the influence of parameters such as alumina modification or KF-loading on experimental results. Hence, the Pd-catalyzed, solvent-free Suzuki-Miyaura reaction was chosen as model reaction to investigate the effect of the above mentioned parameters on the results of coupling reactions. The results from ball milling experiments led to the conclusion that self-prepared and commercially available KF-Al₂O ₃differ in water content. The higher the residual water content, the higher are the product yields.

  8. Electron-Ionic Model of Ball Lightening

    OpenAIRE

    Fedosin, Sergey G.; Kim, Anatolii S.

    2001-01-01

    The model of ball lightning is presented where outside electron envelope is kept by inside volume of positive charges. The moving of electron in outside envelope is a reason of strong magnetic field, which controls the state of hot ionized air inside of ball lightning. The conditions of origins of ball lightning are investigated and the values of parameters for ball lightning of maximum power are calculated.

  9. Device Rotates Bearing Balls For Inspection

    Science.gov (United States)

    Burley, R. K.

    1988-01-01

    Entire surface of ball inspected automatically and quickly. Device holds and rotates bearing ball for inspection by optical or mechanical surface-quality probe, eddy-current probe for detection of surface or subsurface defects, or circumference-measuring tool. Ensures entire surface of ball moves past inspection head quickly. New device saves time and increases reliability of inspections of spherical surfaces. Simple to operate and provides quick and easy access for loading and unloading of balls during inspection.

  10. Generation of Laboratory Ball Lightning

    Energy Technology Data Exchange (ETDEWEB)

    Oreshko, A G [Moscow Aviation Institute (State Technical University), Volokolamskoe shosse 4, 125871 Moscow (Russian Federation)

    2006-07-15

    The phenomenon of energy conversion in the streams of directed electrons and ions into electromagnetic radiation was found out experimentally and proved theoretically. The direct proofs of the domain mechanism of the charged particles acceleration and mechanism of ball lightning generation were obtained and the theoretical calculations were refined.

  11. SECRET OF A BALL LIGHTNING

    Directory of Open Access Journals (Sweden)

    E.V. Savich

    2013-04-01

    Full Text Available A ball lightning is a natural phenomenon that occurs at a streak lightning stroke with its action by thermal and magnetic energy releasing around the streak lightning channel and transforming, in the end, the surrounding air into a steam cloud that transits into ferroelectric state under the magnetic field action.

  12. A Conjecture Concerning Ball Lightning

    OpenAIRE

    Sturrock, P. A.

    2016-01-01

    There is at present no theory that can explain the curious properties of ball lightning. This suggests that we may not be using the most appropriate concepts. The concept of a 'parallel space' may point the way to a valid theory.

  13. Laboratory-produced ball lightning

    Science.gov (United States)

    Golka, Robert K., Jr.

    1994-05-01

    For 25 years I have actively been searching for the true nature of ball lightning and attempting to reproduce it at will in the laboratory. As one might expect, many unidentified lights in the atmosphere have been called ball lightning, including Texas Maffa lights (automobile headlights), flying saucers (UFOs), swamp gas in Ann Arbor, Michigan, etc. For 15 years I thought ball lightning was strictly a high-voltage phenomenon. It was not until 1984 when I was short-circuiting the electrical output of a diesel electric railroad locomotive that I realized that the phenomenon was related more to a high current. Although I am hoping for some other types of ball lightning to emerge such as strictly electrostatic-electromagnetic manifestations, I have been unlucky in finding laboratory provable evidence. Cavity-formed plasmodes can be made by putting a 2-inch burning candle in a home kitchen microwave oven. The plasmodes float around for as long as the microwave energy is present.

  14. Reflections on a Disco Ball

    Science.gov (United States)

    Ribeiro, Jair Lúcio Prados

    2016-01-01

    A disco ball is a spherical object covered with small plane mirrors. When light reflects on these mirrors, it is scattered in many directions, producing a novel effect. The mirror globe is usually set to rotate, creating a profusion of moving spots (Fig. 1). In this article, we present a geometrical description of the movement of these spots and…

  15. LHC gets the ball rolling

    CERN Document Server

    2007-01-01

    1. The multidisciplinary team responsible for the RF ball project to check the interconnections. From left to right: Rhodri Jones (AB/BI), Eva Calvo (AB/BI), Francesco Bertinelli (AT/MCS), Sonia Bartolome Jimenez (TS/IC), Sylvain Weisz (TS/IC), Paul Cruikshank (AT/VAC), Willemjan Maan (AT/VAC), Alain Poncet (AT/MCS), Marek Gasior (AB/BI).2. During the tests the ball is inserted very carefully into the vacuum chamber.1. Le groupe pluridisciplinaire qui a mené le projet de balle RF pour vérifier les interconnexions avec, de gauche à droite, Rhodri Jones (AB/BI), Eva Calvo (AB/BI), Francesco Bertinelli (AT/MCS), Sonia Bartolome Jimenez (TS/IC), Sylvain Weisz (TS/IC), Paul Cruikshank (AT/VAC), Willemjan Maan (AT/VAC), Alain Poncet (AT/MCS) et Marek Gasior (AB/BI).2. Lors des tests, la balle est insérée dans la chambre à vide avec beaucoup de précaution.

  16. Eddy-Current Inspection of Ball Bearings

    Science.gov (United States)

    Bankston, B.

    1985-01-01

    Custom eddy-current probe locates surface anomalies. Low friction air cushion within cone allows ball to roll easily. Eddy current probe reliably detects surface and near-surface cracks, voids, and material anomalies in bearing balls or other spherical objects. Defects in ball surface detected by probe displayed on CRT and recorded on strip-chart recorder.

  17. Characterization and Infrared Emission Spectroscopy of Ball Plasmoid Discharges

    Science.gov (United States)

    Dubowsky, Scott E.; McCall, Benjamin J.

    2015-06-01

    Plasmas at atmospheric pressure serve many purposes, from ionization sources for ambient mass spectrometry (AMS) to plasma-assisted wound healing. Of the many naturally occurring ambient plasmas, ball lightning is one of the least understood; there is currently no solid explanation in the literature for the formation and lifetime of natural ball lightning. With the first measurements of naturally occurring ball lightning being reported last year, we have worked to replicate the natural phenomenon in order to elucidate the physical and chemical processes by which the plasma is sustained at ambient conditions. We are able to generate ball-shaped plasmoids (self-sustaining plasmas) that are analogous to natural ball lightning using a high-voltage, high-current, pulsed DC system. Improvements to the discharge electronics used in our laboratory and characterization of the plasmoids that are generated from this system will be described. Infrared emission spectroscopy of these plasmoids reveals emission from water and hydroxyl radical -- fitting methods for these molecular species in the complex experimental spectra will be presented. Rotational temperatures for the stretching and bending modes of H2O along with that of OH will be presented, and the non-equilibrium nature of the plasmoid will be discussed in this context. Cen, J.; Yuan, P,; Xue, S. Phys. Rev. Lett. 2014, 112, 035001. Dubowsky, S.E.; Friday, D.M.; Peters, K.C.; Zhao, Z.; Perry, R.H.; McCall, B.J. Int. J. Mass Spectrom. 2015, 376, 39-45.

  18. ANALYSES OF VOLLEY-BALL TECHNIQUE OF BALL SHOTING AT ALOFT BOUNCE BY USING KINEMATICS METHOD

    Directory of Open Access Journals (Sweden)

    Radoslav Bubanj

    2008-08-01

    Full Text Available In the sports hall, student of Faculty of sports and physical education demonstrated technique of ball shoting at aloft bounce in volley-ball. That element of technique was recorded by using of digital camera. Video record was mistreated and prepared for further manipulating which considered admeasurement of reference points on 13-th model system withdrawal of appropriate ”Human“ software. After that, basics kinematics variables were calculated. All results were graphically presented and interpreted. Descriptive method was used as supplementary method which gave informations about impacts of single handed velocities of body segments on length of horizontally and vertically path which outpassed body gravity centre. Descriptive method also gave results about regularity of performed complex element of technique.

  19. Improvements of condenser performance with granulate balls

    International Nuclear Information System (INIS)

    Bratthaell, L.

    1986-05-01

    At the nuclear power plant Oskarshamn has during time Nov 1983 - Apr 1985 test series been done to investigate the improvements of condensor performance with granulate balls. This type of ball is a normal sponge rubber ball coated with granulated plastic material. This material is, different from carborundum and pumice not abrasive to the tube material. The test results show that granulate balls give an improvement of the overall heat transfer coefficient of 5-7 percent compared to continous cleaning with normal sponge rubber balls. Granulate balls remove the utmost thin coating of organic material that the spong rubber balls are not able to remove and a practically metallic clean surface is established. This has been verified by laboratory inspection of tubes withdrawn from the tube bundle and site inspections of the condenser. When the condenser is cleaned by granulate balls during a period of about three days it is possible to keep the performance at a high level for a long time with continous cleaning with normal sponge rubber balls. After about three days the plastic layer on the balls is practically worned out. The balls have during that time fulfilled their function. The improvement in condenser temperature is 1,0-1,5 degree C. For the 02-turbine this means additional delivered energy of about 15000 MWh per year. (author)

  20. Ball mounting fixture for a roundness gage

    Science.gov (United States)

    Gauler, A.L.; Pasieka, D.F.

    1983-11-15

    A ball mounting fixture for a roundness gage is disclosed. The fixture includes a pair of chuck assemblies oriented substantially transversely with respect to one another and mounted on a common base. Each chuck assembly preferably includes a rotary stage and a wobble plate affixed thereto. A ball chuck affixed to each wobble plate is operable to selectively support a ball to be measured for roundness, with the wobble plate permitting the ball chuck to be tilted to center the ball on the axis of rotation of the rotary stage. In a preferred embodiment, each chuck assembly includes a vacuum chuck operable to selectively support the ball to be measured for roundness. The mounting fixture enables a series of roundness measurements to be taken with a conventional rotating gagehead roundness instrument, which measurements can be utilized to determine the sphericity of the ball. 6 figs.

  1. Ceramic Rail-Race Ball Bearings

    Science.gov (United States)

    Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

    2010-01-01

    Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

  2. Contribution of Visual Information about Ball Trajectory to Baseball Hitting Accuracy.

    Science.gov (United States)

    Higuchi, Takatoshi; Nagami, Tomoyuki; Nakata, Hiroki; Watanabe, Masakazu; Isaka, Tadao; Kanosue, Kazuyuki

    2016-01-01

    The contribution of visual information about a pitched ball to the accuracy of baseball-bat contact may vary depending on the part of trajectory seen. The purpose of the present study was to examine the relationship between hitting accuracy and the segment of the trajectory of the flying ball that can be seen by the batter. Ten college baseball field players participated in the study. The systematic error and standardized variability of ball-bat contact on the bat coordinate system and pitcher-to-catcher direction when hitting a ball launched from a pitching machine were measured with or without visual occlusion and analyzed using analysis of variance. The visual occlusion timing included occlusion from 150 milliseconds (ms) after the ball release (R+150), occlusion from 150 ms before the expected arrival of the launched ball at the home plate (A-150), and a condition with no occlusion (NO). Twelve trials in each condition were performed using two ball speeds (31.9 m·s-1 and 40.3 m·s-1). Visual occlusion did not affect the mean location of ball-bat contact in the bat's long axis, short axis, and pitcher-to-catcher directions. Although the magnitude of standardized variability was significantly smaller in the bat's short axis direction than in the bat's long axis and pitcher-to-catcher directions (p ball trajectory for improving hitting accuracy, which is likely due to visuo-motor delay.

  3. A Novel Generic Ball Recognition Algorithm Based on Omnidirectional Vision for Soccer Robots

    Directory of Open Access Journals (Sweden)

    Hui Zhang

    2013-11-01

    Full Text Available It is significant for the final goal of RoboCup to realize the recognition of generic balls for soccer robots. In this paper, a novel generic ball recognition algorithm based on omnidirectional vision is proposed by combining the modified Haar-like features and AdaBoost learning algorithm. The algorithm is divided into offline training and online recognition. During the phase of offline training, numerous sub-images are acquired from various panoramic images, including generic balls, and then the modified Haar-like features are extracted from them and used as the input of the AdaBoost learning algorithm to obtain a classifier. During the phase of online recognition, and according to the imaging characteristics of our omnidirectional vision system, rectangular windows are defined to search for the generic ball along the rotary and radial directions in the panoramic image, and the learned classifier is used to judge whether a ball is included in the window. After the ball has been recognized globally, ball tracking is realized by integrating a ball velocity estimation algorithm to reduce the computational cost. The experimental results show that good performance can be achieved using our algorithm, and that the generic ball can be recognized and tracked effectively.

  4. Spherical microwave confinement and ball lightning

    Science.gov (United States)

    Robinson, William Richard

    This dissertation presents the results of research done on unconventional energy technologies from 1995 to 2009. The present civilization depends on an infrastructure that was constructed and is maintained almost entirely using concentrated fuels and ores, both of which will run out. Diffuse renewable energy sources rely on this same infrastructure, and hence face the same limitations. I first examined sonoluminescence directed toward fusion, but demonstrated theoretically that this is impossible. I next studied Low Energy Nuclear Reactions and developed methods for improving results, although these have not been implemented. In 2000, I began Spherical Microwave Confinement (SMC), which confines and heats plasma with microwaves in a spherical chamber. The reactor was designed and built to provide the data needed to investigate the possibility of achieving fusion conditions with microwave confinement. A second objective was to attempt to create ball lightning (BL). The reactor featured 20 magnetrons, which were driven by a capacitor bank and operated in a 0.2 s pulse mode at 2.45 GHz. These provided 20 kW to an icosahedral array of 20 antennas. Video of plasmas led to a redesign of the antennas to provide better coupling of the microwaves to the plasma. A second improvement was a grid at the base of the antennas, which provided corona electrons and an electric field to aid quick formation of plasmas. Although fusion conditions were never achieved and ball lightning not observed, experience gained from operating this basic, affordable system has been incorporated in a more sophisticated reactor design intended for future research. This would use magnets that were originally planned. The cusp geometry of the magnetic fields is suitable for electron cyclotron resonance in the same type of closed surface that in existing reactors has generated high-temperature plasmas. Should ball lightning be created, it could be a practical power source with nearly ideal

  5. Polymer-composite ball lightning.

    Science.gov (United States)

    Bychkov, V L

    2002-01-15

    Investigations into the state of ball lightning (BL) have been made, and both theory and experiments, related to so-called "polymer-composite" ball lightning, are presented. The properties of such a polymeric BL have been described and are that of a long-lived object capable of storing high energy. Results of experiments, starting with polymeric components in erosive gas discharge experiments, are described and discussed. The model of BL as a highly charged polymer-dielectric structure is described. According to this model BL appears as the result of the aggregation of natural polymers, such as lignin and cellulose, soot, polymeric silica and other natural dust particles. Its ability to glow is explained by the appearance over its perimeter of gas discharges near the highly charged BL surface, and electrical breakdown of some regions on the surface, consisting of polymerized and aggregated threads.

  6. 48 CFR 252.225-7016 - Restriction on acquisition of ball and roller bearings.

    Science.gov (United States)

    2010-10-01

    ... of ball and roller bearings. 252.225-7016 Section 252.225-7016 Federal Acquisition Regulations System... and roller bearings. As prescribed in 225.7009-5, use the following clause: Restriction on Acquisition of Ball and Roller Bearings (MAR 2006) (a) Definitions. As used in this clause' (1) Bearing...

  7. Measurements of drag and lift on smooth balls in flight

    Science.gov (United States)

    Cross, Rod; Lindsey, Crawford

    2017-07-01

    Measurements are presented on the drag and lift coefficients for three relatively smooth balls launched in air and tracked with two cameras separated horizontally by 6.4 m. The ball spin was varied in order to investigate whether the Magnus force would increase or decrease when the ball spin was increased. For one ball, the Magnus force increased. For another ball, the Magnus force decreased almost to zero after reaching a maximum. For the third ball, the Magnus force was negative at low ball spins and positive at high ball spins. For one of the balls, the ball spin increased with time as it travelled through the air.

  8. How to create ball lightning

    Science.gov (United States)

    Golka, Robert K., Jr.

    1991-01-01

    Procedures are given on how to produce ball lightning. Necessary equipment includes a transformer of 150,000 watts capable of providing approximately 10,000 amperes at 15 volts, 60 cycles; thick one inch cables of stranded wire leading into a 3 by 4 by 1 foot plastic tank; a quarter inch thick 4 by 6 inch aluminum plate to be used as one of the discharge electrodes; and another electrode of heavy copper wire with the insulation stripped back 6 inches.

  9. Ball Screw Actuator Including a Stop with an Integral Guide

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Perek, John (Inventor); Geck, Kellan (Inventor)

    2015-01-01

    An actuator includes a housing assembly, a ball nut, a ball screw, and a ball screw stop. The ball nut is rotationally mounted in the housing assembly, is adapted to receive an input torque, and is configured, upon receipt thereof, to rotate and supply a drive force. The ball screw is mounted within the housing assembly and extends through the ball nut. The ball screw has a first end and a second end, and is coupled to receive the drive force from the ball nut. The ball screw is configured, upon receipt of the drive force, to selectively translate between a stow position and a deploy position. The ball screw stop is mounted on the ball screw to translate therewith and is configured to at selectively engage the housing assembly while the ball screw is translating, and engage the ball nut when the ball screw is in the deploy position.

  10. Photons in a ball

    Energy Technology Data Exchange (ETDEWEB)

    Mueck, Wolfgang [Universita degli Studi di Napoli ' ' Federico II' ' , Dipartimento di Fisica ' ' Ettore Pancini' ' , Naples (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Napoli, Naples (Italy)

    2015-12-15

    The electromagnetic field inside a spherical cavity of large radius R is considered in the presence of stationary charge and current densities. R provides infra-red regularisation while maintaining gauge invariance. The quantum ground state of physical photons forming the magnetic field is found to be a coherent state with a definite mean occupation number. The electric field, which is determined by the Gauss law constraint, is maintained by a minimum uncertainty coherent state, according to the projection operator approach to the quantisation of constrained systems. The mean occupation number of this state is proportional to the square of the total charge. The results confirm formulae obtained previously from a calculation with a finite photon mass for infra-red regularisation. (orig.)

  11. Photons in a ball

    Energy Technology Data Exchange (ETDEWEB)

    Mück, Wolfgang, E-mail: mueck@na.infn.it [Dipartimento di Fisica “Ettore Pancini”, Università degli Studi di Napoli “Federico II”, Via Cintia, 80126, Naples (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Napoli, Via Cintia, 80126, Naples (Italy)

    2015-12-11

    The electromagnetic field inside a spherical cavity of large radius R is considered in the presence of stationary charge and current densities. R provides infra-red regularisation while maintaining gauge invariance. The quantum ground state of physical photons forming the magnetic field is found to be a coherent state with a definite mean occupation number. The electric field, which is determined by the Gauss law constraint, is maintained by a minimum uncertainty coherent state, according to the projection operator approach to the quantisation of constrained systems. The mean occupation number of this state is proportional to the square of the total charge. The results confirm formulae obtained previously from a calculation with a finite photon mass for infra-red regularisation.

  12. Climatic crystal balls

    Science.gov (United States)

    What do anchovy and coffee prices have in common? They both are influenced by weather patterns. And so are a lot of other industries in the world of commodities. A new report from the National Research Council says it's time to protect these economic interests. The report outlines a new 15-year global research program that would help scientists make better seasonal and interannual climate predictions. Called the Global Ocean-Atmosphere-Land System or GOALS, the new program would be an extension of the decade-long international Tropical Ocean and Global Atmosphere (TOGA) program, which comes to an end this year. Besides studying the climatic effects of tropical phenomena such as the El Niño/Southern Oscillation, the program would expand these types of studies to Earth's higher latitudes and to additional physical processes, such as the effects of changes in upper ocean currents, soil moisture, vegetation, and land, snow, and sea-ice cover, among others.

  13. (De)synchronization of advanced visual information and ball flight characteristics constrains emergent information-movement couplings during one-handed catching.

    Science.gov (United States)

    Stone, J A; Maynard, I W; North, J S; Panchuk, D; Davids, K

    2015-02-01

    Advance visual information of a projection action and ball flight information is important for organizing dynamic interceptive actions like catching. However, how the central nervous system (CNS) manages the relationship between advance visual information and emerging ball flight information in regulating behavior is less well understood. Here, we sought to examine the extent that advance visual information to the CNS constrains regulation of catching actions by synchronizing and desynchronizing its relationship with ball trajectory characteristics. Novel technology was used to present video footage of an actor throwing a ball at three different speeds, integrated with information from a real ball projected by a machine set to the three speeds. The technology enabled three synchronized and six desynchronized conditions between advance visual information and subsequent ball flight trajectories. Catching performance, kinematic data from the catching hand and gaze behaviors were recorded. Findings revealed that desynchronization of video images of ball projection shaped emergent catching behaviors. Footage of slower throws, paired with faster ball projection speeds, caused catching performance decrements. Timing in early phases of action was organized by the CNS to match the advance visual information presented. In later phases, like the grasp, ball flight information constraints adapted and regulated behaviors. Gaze behaviors showed increased ball projection speed resulted in participants tracking the ball for a smaller percentage of ball flight. Findings highlighted the role of the two visual systems in perception and action, implicating the importance of coupling advanced visual information and ball flight to regulate emergent movement coordination tendencies during interceptive behaviors.

  14. Simulation for grinding balls production using sand mold-gravity casting

    Science.gov (United States)

    Nurjaman, F.; Shofi, A.; Herlina, U.; Prilitasari, N. M.; Triapriani, Y.

    2018-01-01

    In this present work, the grinding balls from high chromium white cast iron (ASTM A-532) were produced by using sand mold-gravity casting. The simulation casting process was conducted before making these grinding balls by using SOLIDCast™ version 8.2.0. The gating system design and the pouring temperature of hot metal were investigated clearly to obtain grinding balls with no-defect. The sound casting of grinding balls was resulted by using the proper gating system with the addition of vent air on the top of each grinding ball’s mold. The dimension of vent air was reduced by the increasing of pouring temperature, thus it resulted on the increasing of the yield production of grinding balls.

  15. Development of a table tennis robot for ball interception using visual feedback

    Science.gov (United States)

    Parnichkun, Manukid; Thalagoda, Janitha A.

    2016-07-01

    This paper presents a concept of intercepting a moving table tennis ball using a robot. The robot has four degrees of freedom(DOF) which are simplified in such a way that The system is able to perform the task within the bounded limit. It employs computer vision to localize the ball. For ball identification, Colour Based Threshold Segmentation(CBTS) and Background Subtraction(BS) methodologies are used. Coordinate Transformation(CT) is employed to transform the data, which is taken based on camera coordinate frame to the general coordinate frame. The sensory system consisted of two HD Web Cameras. The computation time of image processing from web cameras is long .it is not possible to intercept table tennis ball using only image processing. Therefore the projectile motion model is employed to predict the final destination of the ball.

  16. Fluid Mechanics of Cricket and Tennis Balls

    Science.gov (United States)

    Mehta, Rabindra D.

    2009-11-01

    Aerodynamics plays a prominent role in defining the flight of a ball that is struck or thrown through the air in almost all ball sports. The main interest is in the fact that the ball can often deviate from its initial straight path, resulting in a curved, or sometimes an unpredictable, flight path. It is particularly fascinating that that not all the parameters that affect the flight of a ball are always under human influence. Lateral deflection in flight, commonly known as swing, swerve or curve, is well recognized in cricket and tennis. In tennis, the lateral deflection is produced by spinning the ball about an axis perpendicular to the line of flight, which gives rise to what is commonly known as the Magnus effect. It is now well recognized that the aerodynamics of sports balls are strongly dependent on the detailed development and behavior of the boundary layer on the ball's surface. A side force, which makes a ball curve through the air, can also be generated in the absence of the Magnus effect. In one of the cricket deliveries, the ball is released with the seam angled, which trips the laminar boundary layer into a turbulent state on that side. The turbulent boundary layer separates relatively late compared to the laminar layer on the other side, thereby creating a pressure difference and hence side force. The fluid mechanics of a cricket ball become very interesting at the higher Reynolds numbers and this will be discussed in detail. Of all the round sports balls, a tennis ball has the highest drag coefficient. This will be explained in terms of the contribution of the ``fuzz" drag and how that changes with Reynolds number and ball surface wear. It is particularly fascinating that, purely through historical accidents, small disturbances on the ball surface, such as the stitching on cricket balls and the felt cover on tennis balls are all about the right size to affect boundary layer transition and development in the Reynolds numbers of interest. The fluid

  17. Application of a Saddle-Type Eddy Current Sensor in Steel Ball Surface-Defect Inspection.

    Science.gov (United States)

    Zhang, Huayu; Zhong, Mingming; Xie, Fengqin; Cao, Maoyong

    2017-12-05

    Steel ball surface-defect inspection was performed by using a new saddle-type eddy current sensor (SECS), which included a saddle coil and a signal conditioning circuit. The saddle coil was directly wound on the steel ball's outer bracket in a semi-circumferential direction. Driven by a friction wheel, the test steel ball rotated in a one-dimensional direction, such that the steel ball surface was fully scanned by the SECS. There were two purposes for using the SECS in the steel ball inspection system: one was to reduce the complexity of the unfolding wheel of the surface deployment mechanism, and the other was to reduce the difficulty of sensor processing and installation. Experiments were carried out on bearing steel balls in diameter of 8 mm with three types of representative and typical defects by using the SECS, and the results showed that the inspection system can detect surface defects as small as 0.05 mm in width and 0.1 mm in depth with high-repetition detection accuracy, and the detection efficiency of 5 pcs/s, which meet the requirement for inspecting ISO grade 10 bearing steel balls. The feasibility of detecting steel ball surface defects by SECS was verified.

  18. An investigation of the generation and properties of laboratory-produced ball lightning

    Science.gov (United States)

    Oreshko, A. G.

    2015-06-01

    The experiments revealed that ball lightning is a self-confining quasi-neutral in a whole plasma system that rotates around its axis. Ball lightning has a structure of a spherical electric domain, consisting of a kernel with excess negative charge and an external spherical layer with excess positive charge. The excess of charges of one sort and the lack of charges of the other sort in the kernel or in the external spherical layer significantly reduces the possibility of electron capture by means of an electric field, created by the nearest ions and leads to a drastic slowdown of recombination process. Direct proof has been obtained that inside of ball lightning - in an external spherical layer that rotates around the axis - there is a circular current of sub-relativistic particles. This current creates and maintains its own poloidal magnetic field of ball lightning, i.e. it carries out the function of magnetic dynamo. The kernel of ball lightning is situated in a region with minimum values of induction of the magnetic field. The inequality of positive and negative charges in elements of ball lightning also significantly reduces losses of the charged plasma on bremsstrahlung. Ball lightning generation occurs in a plasmic vortex. The ball lightning energy in the region of its generation significantly differs from the ball lightning energy, which is drifting in space. The axial component of kinetic energy of particles slightly exceeds 100 keV and the rotational component of the ions energy is a bit greater than 1 MeV. Ball lightning is `embedded' in atmosphere autonomous accelerator of charged particles of a cyclotron type due to self-generation of strong crossed electric and magnetic fields. A discussion of the conditions of stability and long-term existence of ball lightning is given.

  19. Electric charge of a lightning ball

    Science.gov (United States)

    Grigor'ev, A. I.; Shiryaeva, S. O.; Petrushov, N. A.

    2016-09-01

    The electric charge of a lightning ball is found by comparing the electrohydrodynamic stabilities of a charged drop in an electrostatic suspension and a lightning ball floating in a superposition of the gravitational field and the surface electric field. It has been assumed that the electric field strength at the surface is limited by a breakdown value. For a lightning ball radius of 15 cm, its charge is estimated as several microcoulombs. Accordingly, the density of electrostatic energy accumulated in the lightning ball is on the order of one-hundredth of a joule per square centimeter. The density of the material that constitutes the lightning ball has been estimated for the case when the electric field strength at the site of its origination is several times higher than that in fine weather. The density of the lightning ball turns out to differ from that of air by only a few percents.

  20. 48 CFR 225.7009 - Restriction on ball and roller bearings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Restriction on ball and roller bearings. 225.7009 Section 225.7009 Federal Acquisition Regulations System DEFENSE ACQUISITION... roller bearings. ...

  1. Multifractal properties of ball milling dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Budroni, M. A., E-mail: mabudroni@uniss.it; Pilosu, V.; Rustici, M. [Dipartimento di Chimica e Farmacia, Università degli Studi di Sassari, Via Vienna 2, Sassari 07100 (Italy); Delogu, F. [Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Università degli Studi di Cagliari, via Marengo 2, Cagliari 09123 (Italy)

    2014-06-15

    This work focuses on the dynamics of a ball inside the reactor of a ball mill. We show that the distribution of collisions at the reactor walls exhibits multifractal properties in a wide region of the parameter space defining the geometrical characteristics of the reactor and the collision elasticity. This feature points to the presence of restricted self-organized zones of the reactor walls where the ball preferentially collides and the mechanical energy is mainly dissipated.

  2. The Soccer-Ball Problem

    Science.gov (United States)

    Hossenfelder, Sabine

    2014-07-01

    The idea that Lorentz-symmetry in momentum space could be modified but still remain observer-independent has received quite some attention in the recent years. This modified Lorentz-symmetry, which has been argued to arise in Loop Quantum Gravity, is being used as a phenomenological model to test possibly observable effects of quantum gravity. The most pressing problem in these models is the treatment of multi-particle states, known as the 'soccer-ball problem'. This article briefly reviews the problem and the status of existing solution attempts.

  3. Ball Nut Preload Diagnosis of the Hollow Ball Screw through Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Yi-Cheng Huang

    2018-01-01

    Full Text Available This paper studies the diagnostic results of hollow ball screws with different ball nut preload through the support vector machine (SVM process. The method is testified by considering the use of ball screw pretension and different ball nut preload. SVM was used to discriminate the hollow ball screw preload status through the vibration signals and servo motor current signals. Maximum dynamic preloads of 2%, 4%, and 6% ball screws were predesigned, manufactured, and conducted experimentally. Signal patterns with different preload features are separatedby SVM. The irregularity development of the ball screw driving motion current and rolling balls vibration of the ball screw can be discriminated via SVM based on complexity perception. The experimental results successfully show that the prognostic status of ball nut preload can be envisaged by the proposed methodology. The smart reasoning for the health of the ball screw is available based on classification of SVM. This diagnostic method satisfies the purposes of prognostic effectiveness on knowing the ball nut preload status

  4. A Comparative Study of Two Types of Ball-on-Ball Collision

    Science.gov (United States)

    White, Colin

    2017-01-01

    This paper describes three methods of measuring the coefficient of restitution (CoR) for two different types of ball-on-ball collision. The first collision type (for which two different CoR measurement procedures are described) is a static, hanging steel ball forming part of a Newton's cradle arrangement, which is then hit by its adjacent…

  5. Predicting brain acceleration during heading of soccer ball

    Science.gov (United States)

    Taha, Zahari; Hasnun Arif Hassan, Mohd; Azri Aris, Mohd; Anuar, Zulfika

    2013-12-01

    There has been a long debate whether purposeful heading could cause harm to the brain. Studies have shown that repetitive heading could lead to degeneration of brain cells, which is similarly found in patients with mild traumatic brain injury. A two-degree of freedom linear mathematical model was developed to study the impact of soccer ball to the brain during ball-to-head impact in soccer. From the model, the acceleration of the brain upon impact can be obtained. The model is a mass-spring-damper system, in which the skull is modelled as a mass and the neck is modelled as a spring-damper system. The brain is a mass with suspension characteristics that are also defined by a spring and a damper. The model was validated by experiment, in which a ball was dropped from different heights onto an instrumented dummy skull. The validation shows that the results obtained from the model are in a good agreement with the brain acceleration measured from the experiment. This findings show that a simple linear mathematical model can be useful in giving a preliminary insight on what human brain endures during a ball-to-head impact.

  6. Unpredictable Property of a Kicked Billiard Ball

    International Nuclear Information System (INIS)

    Shen Ying; Dai Jun; Jiang Yumei; He Yue; He Daren

    2006-01-01

    A simultaneous change in the systemic property of a kicked billiard ball is observed from an entirely smooth and conservative state to a piecewise smooth and quasi-dissipative state when a single controlling parameter has been adjusted. The transition induces a sudden change of a typical conservative stochastic web into a transient web. The iterations on the transient web eventually escape to some elliptic islands. In the meantime, a fat fractal forbidden web, which appears also at the threshold, grows up and cuts away increasingly more parts from the original conservative stochastic web. We numerically show that the initial conditions that generated different attractors are mixed in a random manner and the pattern remains unchanged even when smaller and smaller scales are used for examination, indicating a riddle-like basin structure that practically rules out the possibility of predicting the attractors from a given initial condition

  7. Phenomenon of ball lightning and its outgrowths

    Energy Technology Data Exchange (ETDEWEB)

    Torchigin, V.P. [Institute of Informatics Problems, Russian Academy of Sciences, Nakhimovsky prospect 36/1, 119278 Moscow (Russian Federation)]. E-mail: v_torchigin@mail.ru; Torchigin, A.V. [Institute of Informatics Problems, Russian Academy of Sciences, Nakhimovsky prospect 36/1, 119278 Moscow (Russian Federation)

    2005-03-28

    New physical phenomena deduced from properties of ball lightning are considered under assumption that ball lightning is a light bubble comprising of a thin spherical layer of compressed air where an intense light circulates in all possible directions. Explanation of behavior of autonomous luminous objects produced at gas discharge is presented.

  8. Fusion characteristics of ball lighting like configurations

    Energy Technology Data Exchange (ETDEWEB)

    Sanduloviciu, M.; Lozneanu, E. [Universitatea A1. I. Cuza, Iasi (Romania)

    1997-12-31

    Assuming that an already proposed self-organization physical scenario is at the origin of both ball lightnings as well as fireballs produced in high intensity electrical discharges, we suggest a new possibility to create fusion relevant ball lightning like configurations in laboratory. Perhaps this becomes possible by prolonging in a controllable way their lifetime and energy content. (author)

  9. Structural and dynamical properties of Yukawa balls

    International Nuclear Information System (INIS)

    Block, D; Kroll, M; Arp, O; Piel, A; Kaeding, S; Ivanov, Y; Melzer, A; Henning, C; Baumgartner, H; Ludwig, P; Bonitz, M

    2007-01-01

    To study the structural and dynamical properties of finite 3D dust clouds (Yukawa balls) new diagnostic tools have been developed. This contribution describes the progress towards 3D diagnostics for measuring the particle positions. It is shown that these diagnostics are capable of investigating the structural and dynamical properties of Yukawa balls and gaining insight into their basic construction principles

  10. Soccer Ball Lift Coefficients via Trajectory Analysis

    Science.gov (United States)

    Goff, John Eric; Carre, Matt J.

    2010-01-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…

  11. Protecting a Ball-Bearing-Deflection Monitor

    Science.gov (United States)

    Kuhr, George A.

    1987-01-01

    Deflectometer probe monitors deflection of ball-bearing race in liquid oxygen with aid of small window or diaphragm. Diaphragm or window isolates optical deflectometer from liquid oxygen or other fluid in ball bearing. At high pressures, diaphragm integral part of housing preferable to window, since there would be no leakage.

  12. Flicker Ball, Physical Education: 5551.34.

    Science.gov (United States)

    Stout, Paul L.

    This course outline is a guide for teaching skills of flicker ball in grades 7-12. The course format includes lectures, game situations, class tournaments, and tests that focus on mastery of skills, understanding of rules, and development of techniques in shooting and passing. Course content includes the following: (a) history of flicker ball, (b)…

  13. Development of Microcontroller-Based Ball and Beam Trainer Kit

    Directory of Open Access Journals (Sweden)

    Gunawan Dewantoro

    2015-03-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE A ball and beam trainer kit based on microcontroller was developed for teaching control system course for the sophomore students. This specially-purposed kit consists of a ball located on a beam with a fixed axle at one of its end. At the other end, a servomotor was employed to control the position of the ball by adjusting the rotation angle of the servomotor. Seven predetermined positions were set to 10, 20, 30, 40, 50, 60, and 70 cm relative to the fixed axle of the beam. The Proportional-Integral-Derivative (PID scheme was then used to compensate the error. This kit is equipped with a user interface to configure controller coefficients, select the set points, plot the actual ball position, and display parameter values. The user interface program runs on PC or notebook connected to microcontroller via serial communications. A questionnaire-based assessment about the use of this kit was conducted by 17 students taking the course, giving a rating value of 94.12%.

  14. Application of the Blobo bluetooth ball in wrist rehabilitation training.

    Science.gov (United States)

    Hsieh, Wei-Min; Hwang, Yuh-Shyan; Chen, Shih-Ching; Tan, Sun-Yen; Chen, Chih-Chen; Chen, Yu-Luen

    2016-01-01

    [Purpose] The introduction of emerging technologies such as the wireless Blobo bluetooth ball with multimedia features can enhance wrist physical therapy training, making it more fun and enhancing its effects. [Methods] Wrist injuries caused by fatigue at work, improper exercise, and other conditions are very common. Therefore, the reconstruction of wrist joint function is an important issue. The efficacy of a newly developed integrated wrist joint rehabilitation game using a Blobo bluetooth ball with C# software installed was tested in wrist rehabilitation (Flexion, Extension, Ulnar Deviation, Radial Deviation). [Results] Eight subjects with normal wrist function participated in a test of the system's stability and repeatability. After performing the Blobo bluetooth ball wrist physical therapy training, eight patients with wrist dysfunction experienced approximately 10° improvements in range of motion (ROM) of flexion extension, and ulnar deviation and about 6° ROM improvement in radial deviation. The subjects showed progress in important indicators of wrist function. [Conclusion] This study used the Blobo bluetooth ball in wrist physical therapy training and the preliminary results were encouraging. In the future, more diverse wrist or limb rehabilitation games should be developed to meet the needs of physical therapy training.

  15. Study of soccer ball flight trajectory

    Directory of Open Access Journals (Sweden)

    Javorova Juliana

    2018-01-01

    Full Text Available In this paper the trajectories of a soccer ball for the most important kicks in the football game - a corner kick and a direct free kick are studied. The soccer ball is modelled as an ideal rigid hollow spherical body with six degrees of freedom, which performs a general motion in an immovable air environment with constant parameters. The ball 3D orientation is determined by the three Cardan angles. The aerodynamic forces and moments with which the air environment acts to the ball are taken into account. Two of the most dangerous areas of the football goal are defined. Differential equations which describe the motion of the soccer ball are solved numerically by MatLab-Simulink.

  16. Study of the dynamic properties and effects of temperature using a spring model for the bouncing ball

    Science.gov (United States)

    Wadhwa, Ajay

    2013-05-01

    We studied the motion of a bouncing ball by representing it through an equivalent mass-spring system executing damped harmonic oscillations. We represented the elasticity of the system through the spring constant ‘k’ and the viscous damping effect, causing loss of energy, through damping constant ‘c’. By including these two factors we formed a differential equation for the equivalent mass-spring system of the bouncing ball. This equation was then solved to study the elastic and dynamic properties of its motion by expressing them in terms of experimentally measurable physical quantities such as contact time, coefficient of restitution, etc. We used our analysis for different types of ball material: rubber (lawn-tennis ball, super ball, soccer ball and squash ball) and plastic (table-tennis ball) at room temperature. Since the effect of temperature on the bounce of a squash ball is significant, we studied the temperature dependence of its elastic properties. The experiments were performed using audio and surface-temperature sensors interfaced with a computer through a USB port. The work presented here is suitable for undergraduate laboratories. It particularly emphasizes the use of computer interfacing for conducting conventional physics experiments.

  17. La balle et la plume

    Directory of Open Access Journals (Sweden)

    Peter Marquis

    2012-06-01

    Full Text Available Fin octobre 2008, la nouvelle fit l’effet d’une bombe : Barack Obama, alors candidat à la présidence américaine, demanda à la chaîne câblée Fox News de retarder le début du sixième match de la World Series de base-ball afin de diffuser un spot de campagne. Son adversaire, John McCain, soutenu par le camp républicain et une partie de la population, monta aussitôt au créneau pour dénoncer l’hérésie : s’arroger le droit de perturber cette grande finale du championnat au déroulement immuable reve...

  18. A model for ball lightning

    International Nuclear Information System (INIS)

    Fryberger, D.

    1994-10-01

    A model for ball lightning (BL) is described. It is based upon the vorton model for elementary particles, which exploits the symmetry between electricity and magnetism. The core, or driving engine, of BL in this model is comprised of a vorton-antivorton plasma. The energy of BL, which derives from nucleon decay catalyzed by this plasma, leads, through various mechanisms, to BL luminosity as well as to other BL features. It is argued that this model could also be a suitable explanation for other luminous phenomena, such as the unidentified atmospheric light phenomena seen at Hessdalen. It is predicted that BL and similar atmospheric luminous phenomena should manifest certain features unique to this model, which would be observable with suitable instrumentation

  19. Cricket Ball Aerodynamics: Myth Versus Science

    Science.gov (United States)

    Mehta, Rabindra D.; Koga, Demmis J. (Technical Monitor)

    2000-01-01

    Aerodynamics plays a prominent role in the flight of a cricket ball released by a bowler. The main interest is in the fact that the ball can follow a curved flight path that is not always under the control of the bowler. ne basic aerodynamic principles responsible for the nonlinear flight or "swing" of a cricket ball were identified several years ago and many papers have been published on the subject. In the last 20 years or so, several experimental investigations have been conducted on cricket ball swing, which revealed the amount of attainable swing, and the parameters that affect it. A general overview of these findings is presented with emphasis on the concept of late swing and the effects of meteorological conditions on swing. In addition, the relatively new concept of "reverse" swing, how it can be achieved in practice and the role in it of ball "tampering", are discussed in detail. A discussion of the "white" cricket ball used in last year's World Cup, which supposedly possesses different swing properties compared to a conventional red ball, is also presented.

  20. Production of Ball-Lightning-Like Luminous Balls by Electrical Discharges in Silicon

    Science.gov (United States)

    Paiva, Gerson Silva; Pavão, Antonio Carlos; Alpes de Vasconcelos, Elder; Mendes, Odim, Jr.; Felisberto da Silva, Eronides, Jr.

    2007-01-01

    We performed electric arc discharges in pure Si to generate luminous balls with lifetime in the order of seconds and several properties usually reported for natural ball lightning. This simple experiment does not rely on energy sources and excitation mechanisms that are improbable in the natural phenomenon and clearly demonstrates the role of vaporization and oxidation of Si, as proposed by the Abrahamson-Dinniss theory for ball-lightning formation.

  1. Production of ball-lightning-like luminous balls by electrical discharges in silicon.

    Science.gov (United States)

    Paiva, Gerson Silva; Pavão, Antonio Carlos; Alpes de Vasconcelos, Elder; Mendes, Odim; da Silva, Eronides Felisberto

    2007-01-26

    We performed electric arc discharges in pure Si to generate luminous balls with lifetime in the order of seconds and several properties usually reported for natural ball lightning. This simple experiment does not rely on energy sources and excitation mechanisms that are improbable in the natural phenomenon and clearly demonstrates the role of vaporization and oxidation of Si, as proposed by the Abrahamson-Dinniss theory for ball-lightning formation.

  2. The ball SITE sign: Ball sports-induced targetoid erythema in a racquetball player.

    Science.gov (United States)

    Cohen, Philip R

    2015-07-01

    Cutaneous injury following impact of a high velocity ball to the skin may result in either erythema or purpura or both. The lesion typically appears as an annular ring of erythema with or without accompanying ecchymosis when the skin is contacted by a paintball, a ping pong ball, a racquetball or a squash ball. To describe a girl with targetoid erythema following impact of a racquetball on her flank and back and to review other sports associated with this response to skin injury. PubMed was used to search the following terms, separately and in combination: ball, erythema, paint, ping pong, purpura, racquetball, sign, site, sports, squash, targetoid. All papers were reviewed and relevant manuscripts, along with their reference citations, were evaluated. A 13-year-old girl developed an annular red ring surrounding a central area of normal appearing skin on her right flank and upper back where a racquetball traveling at a high velocity contacted her skin. Similar appearing lesions of targetoid erythema have been described at the cutaneous impact sites of either paintballs, ping pong balls, squash balls; in addition to erythema, purpura may also concurrently appear or subsequently develop at the contact location of the ball with the skin. Targetoid erythema is a pathognomonic cutaneous presentation resulting from the impact of either a paintball, ping pong ball, racquetball or squash ball-that is traveling at a high velocity-with a sport participant's skin. The ball SITE (sports-induced targetoid erythema) sign is suggested as a unifying nomenclature to designate this unique, ball sport-associated, cutaneous dermatosis in athletes participating in sports in which high velocity impact of the ball with the skin may occur.

  3. Contribution of Visual Information about Ball Trajectory to Baseball Hitting Accuracy.

    Directory of Open Access Journals (Sweden)

    Takatoshi Higuchi

    Full Text Available The contribution of visual information about a pitched ball to the accuracy of baseball-bat contact may vary depending on the part of trajectory seen. The purpose of the present study was to examine the relationship between hitting accuracy and the segment of the trajectory of the flying ball that can be seen by the batter. Ten college baseball field players participated in the study. The systematic error and standardized variability of ball-bat contact on the bat coordinate system and pitcher-to-catcher direction when hitting a ball launched from a pitching machine were measured with or without visual occlusion and analyzed using analysis of variance. The visual occlusion timing included occlusion from 150 milliseconds (ms after the ball release (R+150, occlusion from 150 ms before the expected arrival of the launched ball at the home plate (A-150, and a condition with no occlusion (NO. Twelve trials in each condition were performed using two ball speeds (31.9 m·s-1 and 40.3 m·s-1. Visual occlusion did not affect the mean location of ball-bat contact in the bat's long axis, short axis, and pitcher-to-catcher directions. Although the magnitude of standardized variability was significantly smaller in the bat's short axis direction than in the bat's long axis and pitcher-to-catcher directions (p < 0.001, additional visible time from the R+150 condition to the A-150 and NO conditions resulted in a further decrease in standardized variability only in the bat's short axis direction (p < 0.05. The results suggested that there is directional specificity in the magnitude of standardized variability with different visible time. The present study also confirmed the limitation to visual information is the later part of the ball trajectory for improving hitting accuracy, which is likely due to visuo-motor delay.

  4. How Magnus Bends the Flying Ball--Experimenting and Modeling

    Science.gov (United States)

    Timková, V.; Ješková, Z.

    2017-01-01

    Students are well aware of the effect of the deflection of sports balls when they have been given a spin. A volleyball, tennis, or table tennis ball served with topspin results in an additional downward force that makes the ball difficult to catch and return. In soccer, the effect of sidespin causes the ball to curve unexpectedly sideways,…

  5. Flexible timing of eye movements when catching a ball.

    Science.gov (United States)

    López-Moliner, Joan; Brenner, Eli

    2016-01-01

    In ball games, one cannot direct ones gaze at the ball all the time because one must also judge other aspects of the game, such as other players' positions. We wanted to know whether there are times at which obtaining information about the ball is particularly beneficial for catching it. We recently found that people could catch successfully if they saw any part of the ball's flight except the very end, when sensory-motor delays make it impossible to use new information. Nevertheless, there may be a preferred time to see the ball. We examined when six catchers would choose to look at the ball if they had to both catch the ball and find out what to do with it while the ball was approaching. A catcher and a thrower continuously threw a ball back and forth. We recorded their hand movements, the catcher's eye movements, and the ball's path. While the ball was approaching the catcher, information was provided on a screen about how the catcher should throw the ball back to the thrower (its peak height). This information disappeared just before the catcher caught the ball. Initially there was a slight tendency to look at the ball before looking at the screen but, later, most catchers tended to look at the screen before looking at the ball. Rather than being particularly eager to see the ball at a certain time, people appear to adjust their eye movements to the combined requirements of the task.

  6. Implementing a Remote Laboratory Experience into a Joint Engineering Degree Program: Aerodynamic Levitation of a Beach Ball

    Science.gov (United States)

    Jernigan, S. R.; Fahmy, Y.; Buckner, G. D.

    2009-01-01

    This paper details a successful and inexpensive implementation of a remote laboratory into a distance control systems course using readily available hardware and software. The physical experiment consists of a beach ball and a dc blower; the control objective is to make the height of the aerodynamically levitated beach ball track a reference…

  7. Static Load Distribution in Ball Bearings

    Science.gov (United States)

    Ricci, Mario

    2010-01-01

    A numerical procedure for computing the internal loading distribution in statically loaded, single-row, angular-contact ball bearings when subjected to a known combined radial and thrust load is presented. The combined radial and thrust load must be applied in order to avoid tilting between inner and outer rings. The numerical procedure requires the iterative solution of Z + 2 simultaneous nonlinear equations - where Z is the number of the balls - to yield an exact solution for axial and radial deflections, and contact angles. Numerical results for a 218 angular-contact ball bearing have been compared with those from the literature and show significant differences in the magnitudes of the ball loads, contact angles, and the extent of the loading zone.

  8. Energy transfer problems of ball lightning

    Energy Technology Data Exchange (ETDEWEB)

    Egely, G.

    1986-04-01

    The paper analyzes the energy transport phenomenon of ball lightnings, but momentum and charge transport phenomena are considered as well. The physical properties as energy density and transfer are investigated using several observers' accounts of interactions with different objects. It is shown that contrary to previous assumptions the ball lightning has negative electric charge, and very high internal energy density. Both internal and external energy source models are analyzed, and it is shown that regardless to the details of a given model neither of them can explain actual observations. This has been validated by a well documented case study, and by several additional observations. An entirely new, testable model is suggested, which is able to stand for all observed properties of ball lightnings, and it explains the cause of rarity of ball lightnings, and the reasons of the unsuccessful experimental efforts. It is shown that the plasma sphere is just a visible side effect of a more important phenomenon.

  9. Dynamic analysis of double-row self-aligning ball bearings due to applied loads, internal clearance, surface waviness and number of balls

    Science.gov (United States)

    Zhuo, Yaobin; Zhou, Xiaojun; Yang, Chenlong

    2014-11-01

    In this paper, a three degrees of freedom (dof) model was established for a double-row self-aligning ball bearing (SABB) system, and was applied to study the dynamic behavior of the system during starting process and constant speed rotating process. A mathematical model was developed concerning stiffness and damping characteristics of the bearing, as well as three-dimensional applied load, rotor centrifugal force, etc. Balls and races were all considered as nonlinear springs, and the contact force between ball and race was calculated based on classic Hertzian elastic contact deformation theory and deformation compatibility theory. The changes of each ball's contact force and loaded angle of each row were taken into account. In order to solve the nonlinear dynamical equilibrium equations of the system, these equations were rewritten as differential equations and the fourth order Runge-Kutta method was used to solve the equations iteratively. In order to verify accuracy of the dynamical model and correctness of the numerical solution method, a kind of SABB-BRF30 was chosen for case studies. The effects of several important governing parameters, such as radial and axial applied loads, normal internal, inner and outer races waviness, and number of balls were investigated. These parametric studies led to a complete characterization of the shaft-bearing system vibration transmission. The research provided a theoretical reference for new type bearing design, shaft-bearing system kinetic analysis, optimal design, etc.

  10. Crystal ball single event display

    International Nuclear Information System (INIS)

    Grosnick, D.; Gibson, A.; Allgower, C.; Alyea, J.; Argonne National Lab., IL

    1997-01-01

    The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about π o 's and η's formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer

  11. Dolphin underwater bait-balling behaviors in relation to group and prey ball sizes.

    Science.gov (United States)

    Vaughn-Hirshorn, Robin L; Muzi, Elisa; Richardson, Jessica L; Fox, Gabriella J; Hansen, Lauren N; Salley, Alyce M; Dudzinski, Kathleen M; Würsig, Bernd

    2013-09-01

    We characterized dusky dolphin (Lagenorhynchus obscurus) feeding behaviors recorded on underwater video, and related behaviors to variation in prey ball sizes, dolphin group sizes, and study site (Argentina versus New Zealand, NZ). Herding behaviors most often involved dolphins swimming around the side or under prey balls, but dolphins in Argentina more often swam under prey balls (48% of passes) than did dolphins in NZ (34% of passes). This result may have been due to differences in group sizes between sites, since groups are larger in Argentina. Additionally, in NZ, group size was positively correlated with proportion of passes that occurred under prey balls (pdolphins in Argentina more often swam through prey balls (8% of attempts) than did dolphins in NZ (4% of attempts). This result may have been due to differences in prey ball sizes between sites, since dolphins fed on larger prey balls in Argentina (>74m(2)) than in NZ (maximum 33m(2)). Additionally, in NZ, dolphins were more likely to swim through prey balls to capture fish when they fed on larger prey balls (p=0.025). Copyright © 2013 Elsevier B.V. All rights reserved.

  12. Thermoelastoplastic Deformation of a Multilayer Ball

    Science.gov (United States)

    Murashkin, E. V.; Dats, E. P.

    2017-09-01

    The problem of centrally symmetric deformation of a multilayer elastoplastic ball in the process of successive accretion of preheated layers to its outer surface is considered in the framework of small elastoplastic deformations. The problems of residual stress formation in the elastoplastic ball with an inclusion and a cavity are solved under various mechanical boundary conditions on the inner surface and for prescribed thermal compression distributions. The graphs of residual stress and displacement fields are constructed.

  13. Effects of bushings characteristics on suspension ball joint travels

    Science.gov (United States)

    Yang, Xiaobo

    2011-02-01

    In this paper, a short-long arm type front suspension is represented using multi-body dynamics model established with ADAMS®, where the suspension bushings modelled as linear and nonlinear elements, respectively, are integrated with a flexible cradle and other suspension components. A ball joint travel, defined as the angular displacement between the two parts connected with the ball joint, is calculated, where the measured wheel loads and spindle accelerations from a proving ground severe durability test schedule serve as the input data. The ball joints considered in this study include lower ball joints, upper ball joints, outer tierod ball joints, and inner tierod ball joints. The results clearly illustrate that the bushing stiffness and nonlinearity are important for an accurate prediction of ball joint travels and the ball joint travel sensitivities to considered design variables are important for engineers to understand and ensure reliable designs of ball joints.

  14. Klasa, etniczność i państwo w procesie tworzenia marginalności: Ponowne spojrzenie na obszary miejskiej relegacji

    Directory of Open Access Journals (Sweden)

    Loïc Wacquant

    2017-12-01

    Full Text Available Class, ethnicity, and state in the making of marginality: Revisiting territories of urban relegation In the postindustrial city, relegation takes the form of real or imaginary consignment to distinctive sociospatial formations variously and vaguely referred to as “inner cities,” “ghettos,” “enclaves,” “no-go areas,” “problem districts,” or simply “rough neighborhoods.” How are we characterize and differentiate these spaces, what determines their trajectory (birth, growth, decay and death, whence comes the intense stigma attached to them, and what constellations of class, ethnicity and state do they both materialize and signify? These are the questions I pursued in my book “Urban outcasts” (2008 through a methodical comparison of the trajectories of the black American ghetto and the European working-class peripheries in the era of neoliberal ascendancy. In this article, I revisit this cross-continental sociology of “advanced marginality” to tease out its broader lessons for our understanding of the tangled nexus of symbolic, social and physical space in the polarizing metropolis at century’s threshold in particular, and for bringing the core principles of Bourdieu’s sociology to bear on comparative urban studies in general.   Klasa, etniczność i państwo w procesie tworzenia marginalności: Ponowne spojrzenie na obszary miejskiej relegacji W mieście epoki postprzemysłowej relegacja przybiera formę realnego lub wyobrażonego przypisania do odrębnych formacji społeczno-przestrzennych, na różne sposoby i niezbyt precyzyjnie określanych jako „śródmieścia” (inner cities, „getta”, „enklawy”, „rejony niebezpieczne” (no-go areas, „dzielnice stwarzające problemy” (problem districts czy po prostu „nieprzyjemne dzielnice” (rough neighborhoods. W jaki sposób opisujemy i odróżniamy owe przestrzenie, co określa ich trajektorię (powstanie, rozwój, upadek i zanik, skąd wzięło si

  15. Sports selection of volley-ball players: genetic criteria to define motor endowments (information 2

    Directory of Open Access Journals (Sweden)

    Alisa Ablikova

    2016-04-01

    Full Text Available Purpose: to define genetic criteria which can be used while selecting gifted volley-ball players. Material & Methods: the study involved 50 high class volley-ball players and 50 women at the age of 20–29 years old. There were used methods of theoretical analysis and general conclusion, systematic analysis, genealogic methods of genetics, methods of dermatoglyphic and serologic analyses. Results: family gift for going in for sport was detected. At was revealed that gifted volley-ball players had peculiar finger tips prints and distribution of blood groups: the system AB0 in comparison with the total population. Conclusions: the obtained quantitative characteristics of finger dermatoglyphic, some blood groups and rhesus-factor as genetic markers of motor endowments of volley-ball players are proposed.

  16. Judging where a ball will go: the case of curved free kicks in football.

    Science.gov (United States)

    Craig, Cathy M; Berton, Eric; Rao, Guillaume; Fernandez, Laure; Bootsma, Reinoud J

    2006-02-01

    This study examined whether adding spin to a ball in the free kick situation in football affects a professional footballer's perception of the ball's future arrival position. Using a virtual reality set-up, participants observed the flight paths of aerodynamically realistic free kicks with (+/-600 rpm) and without sidespin. With the viewpoint being fixed in the centre of the goal, participants had to judge whether the ball would have ended up in the goal or not. Results show that trajectories influenced by the Magnus force caused by sidespin gave rise to a significant shift in the percentage of goal responses. The resulting acceleration that causes the ball to continually change its heading direction as the trajectory unfolds does not seem to be taken into account by the participants when making goal judgments. We conclude that the visual system is not attuned to such accelerated motion, which may explain why goalkeepers appear to misjudge the future arrival point of such curved free kicks.

  17. Ball lens based lensed patch cord probes for optical coherence tomography in the field of dentistry

    Science.gov (United States)

    Eom, J. B.; Kim, Y.; Lee, S. J.; Min, E. J.; Park, S. J.; Lee, B. H.

    2012-10-01

    A lensed patch cord probe has been made with a ball lens packaged in a metal cylinder. By simply placing a ball lens directly in front of a fiber patch cord, a compact and potentially disposable sampling probe for optical coherence tomography (OCT) could be implemented. To achieve a sufficiently long working distance and a good transverse resolution simultaneously, the proper ball lens diameter and the distance between the ball lens and the fiber patch cord were investigated. Experimentally, a working distance of up to 5.2 mm, 3 dB bandwidth of 2 mm, and transverse resolution of 16 μm were achieved. With the patch cord probe, a common path swept source OCT system was implemented and used to demonstrate the feasibility as the dedicated probe for dentistry.

  18. Secret of a ball lightning

    OpenAIRE

    Савич, Эдуард Владимирович

    2013-01-01

    Шаровая молния – явление природы, происходящее при ударе линейной молнии с ее воздействием тепловой и магнитной энергии, возникающей вокруг канала линейной молнии и в результате образующей из окружающего воздуха облако пара, переходящего под воздействием магнитного поля сегнетоэлектрическое состояние. A ball lightning is a natural phenomenon that occurs at a streak lightning stroke with its action by thermal and magnetic energy releasing around the streak lightning channel and transforming...

  19. KORPORACJE TRANSNARODOWE W PROCESIE GLOBALIZACJI

    OpenAIRE

    Jantoń-Drozdowska, Elżbieta

    2006-01-01

    The aim of this paper is to show the significance for economic globalisation of the expansion of transnational corporations (TNCs) by means of foreign direct investment. Factors conducive to globalisation are directly linked to the liberalisation of international trade, the policy adopted by individual states towards transnational corporations, and also with growing competition in the world market. The author presents other specific factors stimulating globalisation, both in the ...

  20. Procesy obnovy a jejich aplikace

    OpenAIRE

    Rychterová, Nela

    2016-01-01

    In this work we study the renewal theory. At first, we define the basic terms, express and prove the basic theorems. Remarks are added for better understan- ding. Secondly, we express the renewal theorem and its equivalent versions. Fi- nally, we provide examples of application of the theory. 1

  1. NG2 antigen is involved in leukemia invasiveness and central nervous system infiltration in MLL-rearranged infant B-ALL

    NARCIS (Netherlands)

    C. Prieto (Cristina); B. López-Millan (Belén); Roca-Ho, H. (H.); R.W. Stam (Ronald); D. Romero-Moya (Damià); Rodríguez-Baena, F.J. (F. J.); A. Sanjuan-Pla (Alejandra); V. Ayllón (Verónica); Ramírez, M. (M.); Bardini, M. (M.); P. de Lorenzo (Paola); M.G. Valsecchi (Maria Grazia); M. Stanulla (Martin); Iglesias, M. (M.); Ballerini, P. (P.); Carcaboso, Á.M. (M.); Mora, J. (J.); Locatelli, F. (F.); Bertaina, A. (A.); Padilla, L. (L.); Carlos Rodríguez-Manzaneque, J. (J.); C. Bueno (Clara); P. Menéndez (Pablo)

    2018-01-01

    textabstractMixed-lineage leukemia (MLL)-rearranged (MLLr) infant B-cell acute lymphoblastic leukemia (iMLLr-B-ALL) has a dismal prognosis and is associated with a pro-B/mixed phenotype, therapy refractoriness and frequent central nervous system (CNS) disease/relapse. Neuron-glial antigen 2 (NG2) is

  2. Effect of a ball skill intervention on children's ball skills and cognitive functions

    NARCIS (Netherlands)

    Westendorp-Haverdings, Marieke; Houwen, Suzanne; Hartman, Esther; Mombarg, Remo; Smith, Joanne; Visscher, Chris

    Purpose: This study examined the effect of a 16-wk ball skill intervention on the ball skills, executive functioning (in terms of problem solving and cognitive flexibility), and in how far improved executive functioning leads to improved reading and mathematics performance of children with learning

  3. Keeping Your Eyes Continuously on the Ball While Running for Catchable and Uncatchable Fly Balls

    NARCIS (Netherlands)

    Postma, Dees B. W.; den Otter, A. Rob; Zaal, Frank T. J. M.

    2014-01-01

    When faced with a fly ball approaching along the sagittal plane, fielders need information for the control of their running to the interception location. This information could be available in the initial part of the ball trajectory, such that the interception location can be predicted from its

  4. Aerodynamic drag of modern soccer balls.

    Science.gov (United States)

    Asai, Takeshi; Seo, Kazuya

    2013-12-01

    Soccer balls such as the Adidas Roteiro that have been used in soccer tournaments thus far had 32 pentagonal and hexagonal panels. Recently, the Adidas Teamgeist II and Adidas Jabulani, respectively having 14 and 8 panels, have been used at tournaments; the aerodynamic characteristics of these balls have not yet been verified. Now, the Adidas Tango 12, having 32 panels, has been developed for use at tournaments; therefore, it is necessary to understand its aerodynamic characteristics. Through a wind tunnel test and ball trajectory simulations, this study shows that the aerodynamic resistance of the new 32-panel soccer ball is larger in the high-speed region and lower in the middle-speed region than that of the previous 14- and 8-panel balls. The critical Reynolds number of the Roteiro, Teamgeist II, Jabulani, and Tango 12 was ~2.2 × 10(5) (drag coefficient, C d  ≈ 0.12), ~2.8 × 10(5) (C d  ≈ 0.13), ~3.3 × 10(5) (C d  ≈ 0.13), and ~2.4 × 10(5) (C d  ≈ 0.15), respectively. The flight trajectory simulation suggested that the Tango 12, one of the newest soccer balls, has less air resistance in the medium-speed region than the Jabulani and can thus easily acquire large initial velocity in this region. It is considered that the critical Reynolds number of a soccer ball, as considered within the scope of this experiment, depends on the extended total distance of the panel bonds rather than the small designs on the panel surfaces.

  5. Sources and components of ball lightning theory

    Science.gov (United States)

    Nikitin, A. I.; Bychkov, V. L.; Nikitina, T. F.; Velichko, A. M.; Abakumov, V. I.

    2018-03-01

    The article describes the cases when ball lightning (BL) exhibited an extremely high specific energy store (up to 1010 J/m3), a presence of uncompensated electric charge (up to 10‑3 C) and an ability to generate high frequency pulses (up to 10 MW). It is shown that the realization of a combination of these properties of BL is possible if to consider it as a heterogeneous system consisting of a unipolarly charged core and a dielectric shell. In the electric field of the core charge, arises a force owing to the polarization of the shell that opposes the Coulomb repulsion force of the charges. BL models constructed according to the indicated principle are described: the electrodynamic model and the chemical-thermal model, which treats BL as a hollow sphere filled with steam. The requirement to take into account the main three properties of BL makes it possible to reduce the number of models of this natural phenomenon. Detailed cases of observations of high-energy lightning are analyzed.

  6. A Computer-Aided Diagnosis System With EEG Based on the P3b Wave During an Auditory Odd-Ball Task in Schizophrenia.

    Science.gov (United States)

    Santos-Mayo, Lorenzo; San-Jose-Revuelta, Luis M; Arribas, Juan Ignacio

    2017-02-01

    To design a Computer-aided diagnosis (CAD) system using an optimized methodology over the P3b wave in order to objectively and accurately discriminate between healthy controls (HC) and schizophrenic subjects (SZ). We train, test, analyze, and compare various machine learning classification approaches optimized in terms of the correct classification rate (CCR), the degenerated Youden's index (DYI) and the area under the receiver operating curve (AUC). CAD system comprises five stages: electroencephalography (EEG) preprocessing, feature extraction, seven electrode groupings, discriminant feature selection, and binary classification. With two optimal combinations of electrode grouping, filtering, feature selection algorithm, and classification machine, we get either a mean CCR = 93.42%, specificity = 0.9673, sensitivity = 0.8727, DYI = 0.9188, and AUC = 0.9567 (total-15 Hz-J5-MLP), or a mean CCR = 92.23%, specificity = 0.9499, sensitivity = 0.8838, DYI = 0.9162, and AUC = 0.9807 (right hemisphere-35 Hz-J5-SVM), which to our knowledge are higher than those available to date. We have verified that a more restrictive low-pass filtering achieves higher CCR as compared to others at higher frequencies in the P3b wave. In addition, results validate previous hypothesis about the importance of the parietal-temporal region, associated with memory processing, allowing us to identify powerful {feature,electrode} pairs in the diagnosis of schizophrenia, achieving higher CCR and AUC in classification of both right and left Hemispheres, and parietal-temporal EEG signals, like, for instance, the {PSE, P4} pair (J5 and mutual information feature selection). Diagnosis of schizophrenia is made thoroughly by psychiatrists but as any human-based decision that has a subjective component. This CAD system provides the human expert with an objective complimentary measure to help him in diagnosing schizophrenia.

  7. When the ball is in the female's court: How the scramble-competition mating system of the North American red squirrel has shaped male physiology and testosterone dynamics.

    Science.gov (United States)

    Boonstra, Rudy; Dušek, Adam; Lane, Jeffrey E; Boutin, Stan

    2017-10-01

    Male reproductive success in most mammals is determined by their success in direct inter-male competition through aggression and conflict, resulting in female-defense mating systems being predominant. This is linked to male testosterone levels and its dynamics. However, in certain environments, a scramble-competition mating system has evolved, where female reproductive behavior takes precedence and male testosterone dynamics are unlikely to be related to inter-male competition. We studied the North American red squirrel (Tamiasciurus hudsonicus), a species with a well-established scramble-competition system. Using an ACTH hormonal challenge protocol as a proxy for competitive interactions, we compared the testosterone dynamics in breeding males in late winter with that in nonbreeding males in late spring in the Yukon. To gain an integrated picture of their physiological state, we also assessed changes in their stress response, body mass, energy mobilization, and indices of immune function. Testosterone levels at the base bleed were high in breeding males (2.72ng/mL) and virtually absent in non-breeding males (0.04ng/mL). Breeding males were in better condition (heavier body mass, higher hematocrit, and higher erythrocytes), had higher indices of immune function (neutrophil:lymphocyte ratio), but a similar ability to mobilize energy (glucose) compared with non-breeding males. Though total cortisol was higher in non-breeding males, free cortisol was twice as high in breeding males as their corticosteroid binding globulin levels were half as high. In response to the ACTH challenge, testosterone levels in breeding males declined 49% over the first hour and increased 36% over the next hour; in non-breeding males levels showed no change. Free cortisol increased only modestly (26% in breeding males; 23% in non-breeding males). Glucose levels changed similarly in breeding and nonbreeding males, declining for the first 30min and then increasing for the next 60min. Thus

  8. Effect of a ball skill intervention on children's ball skills and cognitive functions.

    Science.gov (United States)

    Westendorp, Marieke; Houwen, Suzanne; Hartman, Esther; Mombarg, Remo; Smith, Joanne; Visscher, Chris

    2014-02-01

    This study examined the effect of a 16-wk ball skill intervention on the ball skills, executive functioning (in terms of problem solving and cognitive flexibility), and in how far improved executive functioning leads to improved reading and mathematics performance of children with learning disorders. Ninety-one children with learning disorders (age 7-11 yr old) were recruited from six classes in a Dutch special-needs primary school. The six classes were assigned randomly either to the intervention or to the control group. The control group received the school's regular physical education lessons. In the intervention group, ball skills were practiced in relative static, simple settings as well as in more dynamic and cognitive demanding settings. Both groups received two 40-min lessons per week. Children's scores on the Test of Gross Motor Development-2 (ball skills), Tower of London (problem solving), Trail Making Test (cognitive flexibility), Dutch Analysis of Individual Word Forms (reading), and the Dutch World in Numbers test (mathematics) at pretest, posttest, and retention test were used to examine intervention effects. The results showed that the intervention group significantly improved their ball skills, whereas the control group did not. No intervention effects were found on the cognitive parameters. However, within the intervention group, a positive relationship (r = 0.41, P = 0.007) was found between the change in ball skill performance and the change in problem solving: the larger children's improvement in ball skills, the larger their improvement in problem solving. The present ball skill intervention is an effective instrument to improve the ball skills of children with learning disorders. Further research is needed to examine the effect of the ball skill intervention on the cognitive parameters in this population.

  9. Novel mathematical model to estimate ball impact force in soccer.

    Science.gov (United States)

    Iga, Takahito; Nunome, Hiroyuki; Sano, Shinya; Sato, Nahoko; Ikegami, Yasuo

    2017-11-22

    To assess ball impact force during soccer kicking is important to quantify from both performance and chronic injury prevention perspectives. We aimed to verify the appropriateness of previous models used to estimate ball impact force and to propose an improved model to better capture the time history of ball impact force. A soccer ball was fired directly onto a force platform (10 kHz) at five realistic kicking ball velocities and ball behaviour was captured by a high-speed camera (5,000 Hz). The time history of ball impact force was estimated using three existing models and two new models. A new mathematical model that took into account a rapid change in ball surface area and heterogeneous ball deformation showed a distinctive advantage to estimate the peak forces and its occurrence times and to reproduce time history of ball impact forces more precisely, thereby reinforcing the possible mechanics of 'footballer's ankle'. Ball impact time was also systematically shortened when ball velocity increases in contrast to practical understanding for producing faster ball velocity, however, the aspect of ball contact time must be considered carefully from practical point of view.

  10. Laser Sintering Technology and Balling Phenomenon.

    Science.gov (United States)

    Oyar, Perihan

    2018-02-01

    The aim of this review was to evaluate the balling phenomenon which occurs typically in Selective Laser Sintering (SLS). The balling phenomenon is a typical SLS defect, and observed in laser sintered powder, significantly reduces the quality of SLS, and hinders the further development of SLS Technology. Electronic database searches were performed using Google Scholar. The keywords "laser sintering, selective laser sintering, direct metal laser melting, and balling phenomenon" were searched in title/abstract of publications, limited to December 31, 2016. The inclusion criteria were SLS, balling phenomenon, some alloys (such as Cr-Co, iron, stainless steel, and Cu-based alloys) mechanical properties, microstructure and bond strength between metal-ceramic crown, laboratory studies, full text, and in English language. A total of 100 articles were found the initial search and yielded a total of 50 studies, 30 of which did not fulfill the inclusion criteria and were therefore excluded. In addition, 20 studies were found by screening the reference list of all included publications. Finally, 40 studies were selected for this review. The method in question is regulated by powder material characteristics and the conditions of laser processing. The procedure of formation, affecting factors, and the mechanism of the balling effect are very complex.

  11. Generation Mechanism of Linear and Angular Ball Velocity in Baseball Pitching

    Directory of Open Access Journals (Sweden)

    Sekiya Koike

    2018-02-01

    Full Text Available The purpose of this study was to quantify the functional roles of the whole-body’s joint torques including fingers’ joints in the generation of ball speed and spin during baseball fast-ball pitching motion. The dynamic contributions of joint torque term, gravitational term, and motion-dependent term (MDT consisting of centrifugal force and Coriolis force, to the generation of the ball variables were calculated using two types of models. Motion and ground reaction forces of a baseball pitcher, who was instructed to throw a fastball into the target, were measured with a motion capture system with two force platforms. The results showed (1 the MDT is the largest contributor to ball speed (e.g., about 31 m/s prior to ball release when using 16-segment model, and (2 the horizontal adduction torque of pitching-side shoulder joint plays a crucial role in generating ball speed with conversion of the MDT into other terms using a recurrence formula.

  12. NG2 antigen is involved in leukemia invasiveness and central nervous system infiltration in MLL-rearranged infant B-ALL

    Science.gov (United States)

    Prieto, C; López-Millán, B; Roca-Ho, H; Stam, R W; Romero-Moya, D; Rodríguez-Baena, F J; Sanjuan-Pla, A; Ayllón, V; Ramírez, M; Bardini, M; De Lorenzo, P; Valsecchi, M G; Stanulla, M; Iglesias, M; Ballerini, P; Carcaboso, Á M; Mora, J; Locatelli, F; Bertaina, A; Padilla, L; Carlos Rodríguez-Manzaneque, J; Bueno, C; Menéndez, P

    2018-01-01

    Mixed-lineage leukemia (MLL)-rearranged (MLLr) infant B-cell acute lymphoblastic leukemia (iMLLr-B-ALL) has a dismal prognosis and is associated with a pro-B/mixed phenotype, therapy refractoriness and frequent central nervous system (CNS) disease/relapse. Neuron-glial antigen 2 (NG2) is specifically expressed in MLLr leukemias and is used in leukemia immunophenotyping because of its predictive value for MLLr acute leukemias. NG2 is involved in melanoma metastasis and brain development; however, its role in MLL-mediated leukemogenesis remains elusive. Here we evaluated whether NG2 distinguishes leukemia-initiating/propagating cells (L-ICs) and/or CNS-infiltrating cells (CNS-ICs) in iMLLr-B-ALL. Clinical data from the Interfant cohort of iMLLr-B-ALL demonstrated that high NG2 expression associates with lower event-free survival, higher number of circulating blasts and more frequent CNS disease/relapse. Serial xenotransplantation of primary MLL-AF4+ leukemias indicated that NG2 is a malleable marker that does not enrich for L-IC or CNS-IC in iMLLr-B-All. However, NG2 expression was highly upregulated in blasts infiltrating extramedullar hematopoietic sites and CNS, and specific blockage of NG2 resulted in almost complete loss of engraftment. Indeed, gene expression profiling of primary blasts and primografts revealed a migratory signature of NG2+ blasts. This study provides new insights on the biology of NG2 in iMLLr-B-ALL and suggests NG2 as a potential therapeutic target to reduce the risk of CNS disease/relapse and to provide safer CNS-directed therapies for iMLLr-B-ALL. PMID:28943635

  13. Electrostatic charge bounds for ball lightning models

    Energy Technology Data Exchange (ETDEWEB)

    Stephan, Karl D [Department of Technology, Texas State University, San Marcos, TX 78666 (United States)], E-mail: kdstephan@txstate.edu

    2008-03-15

    Several current theories concerning the nature of ball lightning predict a substantial electrostatic charge in order to account for its observed motion and shape (Turner 1998 Phys. Rep. 293 1; Abrahamson and Dinniss 2000 Nature 403 519). Using charged soap bubbles as a physical model for ball lightning, we show that the magnitude of charge predicted by some of these theories is too high to allow for the types of motion commonly observed in natural ball lightning, which includes horizontal motion above the ground and movement near grounded conductors. Experiments show that at charge levels of only 10-15 nC, 3-cm-diameter soap bubbles tend to be attracted by induced charges to the nearest grounded conductor and rupture. We conclude with a scaling rule that can be used to extrapolate these results to larger objects and surroundings.

  14. Electrostatic charge bounds for ball lightning models

    Science.gov (United States)

    Stephan, Karl D.

    2008-03-01

    Several current theories concerning the nature of ball lightning predict a substantial electrostatic charge in order to account for its observed motion and shape (Turner 1998 Phys. Rep. 293 1; Abrahamson and Dinniss 2000 Nature 403 519). Using charged soap bubbles as a physical model for ball lightning, we show that the magnitude of charge predicted by some of these theories is too high to allow for the types of motion commonly observed in natural ball lightning, which includes horizontal motion above the ground and movement near grounded conductors. Experiments show that at charge levels of only 10-15 nC, 3-cm-diameter soap bubbles tend to be attracted by induced charges to the nearest grounded conductor and rupture. We conclude with a scaling rule that can be used to extrapolate these results to larger objects and surroundings.

  15. Relativistic-microwave theory of ball lightning

    Science.gov (United States)

    Wu, H.-C.

    2016-06-01

    Ball lightning, a fireball sometimes observed during lightnings, has remained unexplained. Here we present a comprehensive theory for the phenomenon: At the tip of a lightning stroke reaching the ground, a relativistic electron bunch can be produced, which in turn excites intense microwave radiation. The latter ionizes the local air and the radiation pressure evacuates the resulting plasma, forming a spherical plasma bubble that stably traps the radiation. This mechanism is verified by particle simulations. The many known properties of ball lightning, such as the occurrence site, relation to the lightning channels, appearance in aircraft, its shape, size, sound, spark, spectrum, motion, as well as the resulting injuries and damages, are also explained. Our theory suggests that ball lighting can be created in the laboratory or triggered during thunderstorms. Our results should be useful for lightning protection and aviation safety, as well as stimulate research interest in the relativistic regime of microwave physics.

  16. On the energy characteristics of ball lightning.

    Science.gov (United States)

    Bychkov, A V; Bychkov, V L; Abrahamson, John

    2002-01-15

    A compilation of 17 observations of ball lightning showing the most energetic effects is presented along with estimates of their energy content. These observations were chosen from several thousand for the much stronger interaction of each ball lightning on its surroundings, and the method of energy estimation outlined. The case is put that some of the observations show a higher energy than self-contained chemical energy could provide. Comments have been added to the paper, arguing that the energy estimations themselves should be consistent with whatever model is used for ball lightning. For example, the presence of reacting nanoparticles releasing chemical energy may bring about the same observed effects with lower estimated energy.

  17. Relativistic-microwave theory of ball lightning.

    Science.gov (United States)

    Wu, H-C

    2016-06-22

    Ball lightning, a fireball sometimes observed during lightnings, has remained unexplained. Here we present a comprehensive theory for the phenomenon: At the tip of a lightning stroke reaching the ground, a relativistic electron bunch can be produced, which in turn excites intense microwave radiation. The latter ionizes the local air and the radiation pressure evacuates the resulting plasma, forming a spherical plasma bubble that stably traps the radiation. This mechanism is verified by particle simulations. The many known properties of ball lightning, such as the occurrence site, relation to the lightning channels, appearance in aircraft, its shape, size, sound, spark, spectrum, motion, as well as the resulting injuries and damages, are also explained. Our theory suggests that ball lighting can be created in the laboratory or triggered during thunderstorms. Our results should be useful for lightning protection and aviation safety, as well as stimulate research interest in the relativistic regime of microwave physics.

  18. On longevity of I-ball/oscillon

    Energy Technology Data Exchange (ETDEWEB)

    Mukaida, Kyohei [Kavli IPMU (WPI), UTIAS, The University of Tokyo,Kashiwa, Chiba 277-8583 (Japan); Takimoto, Masahiro [Theory Center, KEK,1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Department of Particle Physics and Astrophysics, Weizmann Institute of Science,Rehovot 7610001 (Israel); Yamada, Masaki [Institute of Cosmology, Department of Physics and Astronomy, Tufts University,Medford, MA 02155 (United States); Department of Physics, Tohoku University,Sendai, Miyagi 980-8578 (Japan)

    2017-03-23

    We study I-balls/oscillons, which are long-lived, quasi-periodic, and spatially localized solutions in real scalar field theories. Contrary to the case of Q-balls, there is no evident conserved charge that stabilizes the localized configuration. Nevertheless, in many classical numerical simulations, it has been shown that they are extremely long-lived. In this paper, we clarify the reason for the longevity, and show how the exponential separation of time scales emerges dynamically. Those solutions are time-periodic with a typical frequency of a mass scale of a scalar field. This observation implies that they can be understood by the effective theory after integrating out relativistic modes. We find that the resulting effective theory has an approximate global U(1) symmetry reflecting an approximate number conservation in the non-relativistic regime. As a result, the profile of those solutions is obtained via the bounce method, just like Q-balls, as long as the breaking of the U(1) symmetry is small enough. We then discuss the decay processes of the I-ball/oscillon by the breaking of the U(1) symmetry, namely the production of relativistic modes via number violating processes. We show that the imaginary part is exponentially suppressed, which explains the extraordinary longevity of I-ball/oscillon. In addition, we find that there are some attractor behaviors during the evolution of I-ball/oscillon that further enhance the lifetime. The validity of our effective theory is confirmed by classical numerical simulations. Our formalism may also be useful to study condensates of ultra light bosonic dark matter, such as fuzzy dark matter, and axion stars, for instance.

  19. Soccer ball lift coefficients via trajectory analysis

    Energy Technology Data Exchange (ETDEWEB)

    Goff, John Eric [Department of Physics, Lynchburg College, Lynchburg, VA 24501 (United States); Carre, Matt J, E-mail: goff@lynchburg.ed [Department of Mechanical Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom)

    2010-07-15

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin parameters that have not been obtained by today's wind tunnels. Our trajectory analysis technique is not only a valuable tool for professional sports scientists, it is also accessible to students with a background in undergraduate-level classical mechanics.

  20. Underground Tourist Routes in the Context of Sustainable Development / Podziemne Trasy Turystyczne W Procesie Zrównoważonego Rozwoju

    Science.gov (United States)

    Wieja, Tomasz; Chmura, Janusz; Bartos, Maciej

    2015-09-01

    residence patterns that have emerged over centuries. Well - preserved and protected excavations are the relics of the past, are part of the cultural heritage and become a rich source of knowledge about history. Ostanie lata przyniosły rozwój skoncentrowany na maksymalizacji zysków ekonomicznych i politycznych. Doprowadził on do kryzysów środowiskowych, społecznych, a nawet gospodarczych. Przyczyniło się to do powstania koncepcji zrównoważonego rozwoju. Jest to dążenie do poprawy jakości życia przy zachowaniu równości społecznej, bioróżnorodności i bogactwa zasobów naturalnych. Bardziej świadome i aktywne społeczeństwo ma do odegrania kluczową rolę w zrównoważonym rozwoju. Z jednej strony jest regulatorem wpływu gospodarki na środowisko, zaś z drugiej kapitał społeczny zapewnia ciągłość wizji rozwoju i planowania jej realizacji. Ochrona zabytkowych podziemi bardzo dobrze wpisuje sie w proces zrównoważonego rozwoju. Zachowane i udostępnione zabytkowe podziemia są częścią dziedzictwa kulturowego i mają za zadanie zachowania wartości historycznych, kulturowych, przyrodniczych, a także użytkowych. W ostatnich latach obserwuje się intensywny rozwój działań zmierzających do wykorzystania zabytkowych podziemi do celów użytkowych. Problem rewitalizacji zabytkowych podziemi, a więc przywracanie "do życia" starych wyrobisk, jest bardzo skomplikowanym procesem przywracania pierwotnych funkcji nieczynnym lub zdegradowanym obiektom podziemnym. W procesie projektowania bardzo ważne są działania zgodnie z procesami naturalnymi obowiązującymi w przyrodzie. Zabezpieczane i adaptowane podziemia muszą w rezultacie działań człowieka być "przyjazne" i akceptowane przez użytkowników, będąc elementem ochrony dziedzictwa kulturowego człowieka, a więc częścią składową zrównoważonego rozwoju. Problemy techniczne występujące przy adaptacji zabytkowych podziemi są nie tylko praktycznym zastosowaniem nauki, ale tak

  1. Ultrasonic friction power during thermosonic Au and Cu ball bonding

    International Nuclear Information System (INIS)

    Shah, A; Mayer, M; Zhou, Y; Qin, I; Huynh, C; Meyer, M

    2010-01-01

    The ultrasonic friction power during thermosonic ball bonding with Au and Cu wires, both 25 μm in diameter, is derived with an improved method from experimental measurements during the bonding process. Experimental data include the current delivered to the ultrasonic transducer and the tangential force measured using piezoresistive microsensors integrated close to the Al bonding pad. The improvement results from a new, more accurate method to derive the mechanical compliance of the ultrasonic system. The method employs a bond process modification in which the ultrasonic current is ramped up sequentially in three steps. In the first two steps, the ultrasonic current is set to levels that are too low to cause sliding. The bonding takes place during the third step, when the current is ramped up to the optimum value required for making good quality bonds. The ultrasonic compliance values are derived from the first two steps and are 8.2 ± 0.5 μm N -1 and 7.7 ± 0.5 μm N -1 for the Au and Cu processes, respectively. These values are determined within an average error estimate of ±6%, substantially lower than the ±10% estimated with a previously reported method. The ultrasonic compliance in the case of Au is 6% higher due to the lower elastic modulus of Au compared with that of Cu. Typical maximum values of relative sliding amplitude of ultrasonic friction at the interface are 655 nm and 766 nm for the Au and Cu processes. These values are 81% of the free-air vibration amplitude of the bonding capillary tip for the respective ultrasonic current settings. Due to bond growth, which damps relative motion between the ball and the pad, the final relative amplitude at the bond interface is reduced to 4% of the equivalent free-air amplitude. Even though the maximum value of relative amplitude is 17% higher in the Cu process compared with the Au process, the average total interfacial sliding is 519 μm in the Cu process, which is 31% lower than that in the Au process (759

  2. Paddle Angle and Ball Spin in Table Tennis

    Directory of Open Access Journals (Sweden)

    Binvant Broca

    2017-01-01

    Full Text Available The relationship between the impact angle of a table tennis ball with respect to the paddle and angular velocity of the ball leaving the paddle was investigated. A table tennis ball was dropped onto a paddle oriented at impact angles ranging from 10° to 80°. It was found that the sine of the impact angle is proportional to the angular velocity of the ball as it leaves the paddle for all impact angles tested.

  3. From a Ball Game to Incompleteness

    Indian Academy of Sciences (India)

    theory of computation, logic, and linear algebra. He has authored three books in these areas. We present a ball game that can be continued as long as we wish. It looks as though the game would never end. But by applying a result on trees, we show that the game nonetheless ends in some finite number of moves. We then ...

  4. On the dynamics of ball bearings

    NARCIS (Netherlands)

    Wensing, J.A.

    1998-01-01

    This investigation on the dynamic behaviour of ball bearings was motivated by the demand for silent bearings in noise-sensitive applications, especially in the household appliance and automotive industry. The present investigations are intended to provide a clear understanding of the role of the

  5. 4 π physics with the plastic ball

    International Nuclear Information System (INIS)

    Gutbrod, H.H.; Loehner, H.; Poskanzer, A.M.; Renner, T.; Riedesel, H.; Ritter, H.G.; Warwick, A.; Weik, F.; Wieman, H.

    1982-10-01

    4 π data taken with the Plastic Ball show that cluster production in relativistic nuclear collisions depends on both the size of the participant volume and the finite size of the cluster. The measurement of the degree of thermalization and the search for collective flow will permit the study of the applicability of macroscopic concepts such as temperature and density

  6. Tennis Ball Flight under Strong Wind

    Indian Academy of Sciences (India)

    playing tennis ball cricket or soccer. So go out, play, learn and kick up some dust. But, make sure it does not boomerang in your face! Hurry up before television and third umpires corrupt this great IndIan pastime. Dedication: This article is dedicated to the memory of. Indian cricket legend M L Jaisimha (1939-1999).

  7. A plasma ball in the Microcosm museum

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    Plasma balls, like the one shown here, are displayed in the Microcosm exhibition where families can visit to learn more about the experiments carried out in a research institute like CERN. Hands-on activities allow visitors to get a step closer to the research activities carried out at CERN.

  8. Interrelation between ball lightning and optically induced forces

    Science.gov (United States)

    Torchigin, V. P.; Torchigin, A. V.

    2013-09-01

    Optically induced forces are considered as a key factor for explaining the phenomenon of ball lightning. They can provide not only the existence of ball lightning in the form of self-confined intense white light circulating in a spherical shell of air strongly compressed by the light but also the anomalous motion of ball lightning in the terrestrial atmosphere.

  9. Flexible timing of eye movements when catching a ball

    NARCIS (Netherlands)

    López-Moliner, Joan; Brenner, Eli

    2016-01-01

    In ball games, one cannot direct ones gaze at the ball all the time because one must also judge other aspects of the game, such as other players' positions. We wanted to know whether there are times at which obtaining information about the ball is particularly beneficial for catching it. We recently

  10. Temperature and Coefficient of Restitution of a Table Tennis Ball

    Directory of Open Access Journals (Sweden)

    Yoonyoung Chang

    2016-01-01

    Full Text Available The coefficient of restitution (COR of a bouncing table tennis ball was measured at varying ball temperatures with a Motion Detector. It was found that there is a negative linear relationship between the COR and the temperature of the table tennis ball for temperatures ranging from 5 to 56 ̊C.

  11. Validity and Reliability of a Medicine Ball Explosive Power Test.

    Science.gov (United States)

    Stockbrugger, Barry A.; Haennel, Robert G.

    2001-01-01

    Evaluated the validity and reliability of a medicine ball throw test to evaluate explosive power. Data on competitive sand volleyball players who performed a medicine ball throw and a standard countermovement jump indicated that the medicine ball throw test was a valid and reliable way to assess explosive power for an analogous total-body movement…

  12. Temperature and Coefficient of Restitution of a Table Tennis Ball

    OpenAIRE

    Yoonyoung Chang

    2016-01-01

    The coefficient of restitution (COR) of a bouncing table tennis ball was measured at varying ball temperatures with a Motion Detector. It was found that there is a negative linear relationship between the COR and the temperature of the table tennis ball for temperatures ranging from 5 to 56 ̊C.

  13. Energy density calculations for ball-lightning-like luminous silicon balls

    Energy Technology Data Exchange (ETDEWEB)

    Paiva, Gerson S; Ferreira, Joacy V; Bastos, Cristiano C; Dos Santos, Marcus V; Pavao, Antonio C [Departamento de Quimica Fundamental, Universidade Federal de Pernambuco, Pernambuco (Brazil)

    2010-05-11

    The energy density of a luminous silicon ball [Phys. Rev. Lett. 98 048501 (2007)] is calculated for a model with a metal core surrounded by an atmosphere of silicon oxides. Experimental data combined with the molecular orbital calculations of the oxidation enthalpy lead to a mean energy density of 3.9 MJ m{sup -3}, which is within the range of estimates from other ball lightning models. This result provides good evidence to support the silicon-based model. (methodological notes)

  14. METHODOLOGICAL NOTES: Energy density calculations for ball-lightning-like luminous silicon balls

    Science.gov (United States)

    Paiva, Gerson S.; Ferreira, Joacy V.; Bastos, Cristiano C.; dos Santos, Marcus V.; Pavão, Antonio C.

    2010-05-01

    The energy density of a luminous silicon ball [Phys. Rev. Lett. 98 048501 (2007)] is calculated for a model with a metal core surrounded by an atmosphere of silicon oxides. Experimental data combined with the molecular orbital calculations of the oxidation enthalpy lead to a mean energy density of 3.9 MJ m-3, which is within the range of estimates from other ball lightning models. This result provides good evidence to support the silicon-based model.

  15. Neutrons and the crystal ball experiments

    International Nuclear Information System (INIS)

    Alyea, J.; Grosnick, D.; Koetke, D.; Manweiler, R.; Spinka, H.; Stanislaus, S.

    1997-01-01

    The Crystal Ball detector, as originally constructed, consisted of a set of 672 optically-isolated NaI crystals, forming an approximately spherical shell and each crystal viewed by a photomultiplier, a charged-particle tracker within the NaI shell, and two endcaps to cover angles close to two colliding beams. The detector geometry subtends a solid angle of about 93% of 4π st (20 degree le θ le 160degree and 0degree le φ le 360degree) from the center. The Crystal Ball detector was used for two long series of experiments at the e + e - colliding beam accelerators SPEAR [1, 2, 3, 4] at SLAC and DORIS [5, 6, 7, 8] at DESY. A new set of measurements using the Crystal Ball detector is planned at the Brookhaven National Laboratory Alternating Gradient Synchrotrons (BNL AGS). These new experiments will use the 672 NaI crystals from the original detector, but neither the tracker nor endcaps. The ''Crystal Ball'' in this note will refer only to the set of NaI crystals. Initially, the reactions to be studied will include π - pr a rrow neutrals with pion beam momenta approximately400-750 MeV/c and K - pr a rrow neutrals with kaon beam momenta approximately600-750 MeV/c. Each of these reactions will include a neutron in the final state. whereas the fraction of e + e - interactions with neutrons at SLAC or DESY was quite small. Consequently, there is relatively little experience understanding the behavior of neutrons in the Crystal Ball

  16. Common path ball lens probe for optical coherence tomography (Conference Presentation)

    Science.gov (United States)

    Singh, Kanwarpal; Yamada, Daisuke; Tearney, Guillermo J.

    2016-02-01

    Background: Common path probes are highly desirable for optical coherence tomography (OCT) as they reduce system complexity and cost. In this work we report an all-fiber common path side viewing monolithic probe for coronary artery imaging. Methods: Our common path probe was designed for spectrometer based Fourier domain OCT at 1310 nm wavelength. Light from the fiber expands in the coreless fiber region and then focussed by the ball lens. Reflection from ball lens-air interface served as reference signal. The monolithic ball lens probe was assembled within a 560 µmouter diameter drive shaft which was attached to a rotary junction. The drive shaft was placed inside an outer, transparent sheath of 800 µm diameter. Results: With a source input power of 25 mW, we could achieve sensitivity of 100.5 dB. The axial resolution of the system was found to be 15.6 µm in air and the lateral resolution (full width half maximum) was approximately 49 µm. As proof of principal, images of skin acquired using this probe demonstrated clear visualization of the stratum corneum, epidermis, and papillary dermis, along with sweat ducts. Conclusion: In this work we have demonstrated a monolithic, ball lens common, path probe for OCT imaging. The designed ball lens probe is easy to fabricate using a laser splicer. Based on the features and capability of common path probes to provide a simpler solution for OCT, we believe that this development will be an important enhancement for certain types of catheters.

  17. Implant-supported mandibular overdentures retained with ball or bar attachments: a randomized prospective 5-year study

    DEFF Research Database (Denmark)

    Gotfredsen, K; Holm, B

    2001-01-01

    PURPOSE: The aim of the present study was to evaluate the periimplant conditions and the maintenance requirements for implant-supported overdentures in the mandible retained with ball or bar attachments during a 5-year period. MATERIALS AND METHODS: Twenty-six completely edentulous patients had two...... Astra Tech dental implants placed in the anterior part of the mandible. The denture attachment system for the patients was chosen randomly by drawing lots. Eleven patients drew the bar attachment system and fifteen patients drew the ball attachment system. Plaque Index, Gingival Index, and probing...... differences were registered. The mean frequency of complications/repairs per patient per year was 1.0 in the bar group and 0.6 in the ball group during the 5-year observation period. CONCLUSION: Two implants with ball or bar attachment supported an overdenture in the mandible for 5 years with a 100% survival...

  18. Hemodynamic consequences of cardiac malformations in two juvenile ball pythons (Python regius).

    Science.gov (United States)

    Jensen, Bjarke; Wang, Tobias

    2009-12-01

    Two cases of bifid ventricles and cardiac malformations in juvenile ball python (Python regius) were investigated by blood pressure measurements and macro- and microscopic sectioning. A study of a normal ball python was included for reference. In both cases, all cardiac chambers were enlarged and abnormally shaped. Internal assessment of the ventricles revealed a pronounced defect of the muscular ridge, which normally is responsible for separating the systemic and pulmonary circuits. Consistent with the small muscular ridge, systolic pressures were identical in the pulmonary and systemic arteries, but, the snakes, nevertheless, lived to reach body weights severalfold of their hatchling weight.

  19. Beyond the crystal ball assumption

    DEFF Research Database (Denmark)

    Vaucouleur, Sebastien

    2008-01-01

    (programmers hide implementation details behind previously defined interfaces, or alternatively, they refine some pre-defined properties). While practical, this approach is unfortunately not completely satisfactory for Enterprise Resource Planning systems (ERPs). These software products have to be customizable...

  20. Apparatus and method for inspecting a bearing ball

    Science.gov (United States)

    Bankston, B. F. (Inventor)

    1985-01-01

    A method and apparatus for inspecting the surface of a ball bearing is disclosed which includes a base having a high friction non-abrasive base scanning surface. A holding device includes a cone-shaped cup recess in which a ball element is received. Air is introduced through a passage to relieve friction between the wall of the recess and the ball element and facilitate rolling of the ball over the high friction base surface. The holding device is moved over the base scanning surface in a predetermined pattern such that the entire surface of the ball element is inspected byan eddy current probe which detects any surface defects.

  1. Aerodynamic effects of dimples on soccer ball surfaces.

    Science.gov (United States)

    Hong, Sungchan; Asai, Takeshi

    2017-10-01

    Recently, the shape and design of the panel on the official ball used in the FIFA World Cup was considerably different from that of a conventional soccer ball (having 32 pentagonal and hexagonal panels). Depending on the number of different panels and their orientation, the aerodynamic force experienced by a ball is believed to change, which in turn changes the ball trajectory. However, not much is known about the impact of the surface forms of a ball on its aerodynamics. Therefore, in the present study, 10 different types of soccer balls were produced and their aerodynamic properties were studied by wind tunnel experiments. The results confirmed that the aerodynamic force acting on the ball varied considerably depending on the existence of dimples on the ball surface. In addition, the 4 types of soccer balls, which had different kinds of roughness, revealed that even balls having the same number and shapes of panels experienced greatly varying aerodynamic forces depending on the surface form of the balls.

  2. Emission Spectroscopy of Atmospheric-Pressure Ball Plasmoids: Higher Energy Reveals a Rich Chemistry

    Science.gov (United States)

    Dubowsky, Scott E.; Rose, Amber Nicole; Glumac, Nick; McCall, Benjamin J.

    2017-06-01

    Ball plasmoids (self-sustaining spherical plasmas) are a particularly unique example of a non-equilibrium air plasma. These plasmoids have lifetimes on the order of hundreds of milliseconds without an external power source, however, current models dictate that a ball plasmoid should recombine in a millisecond or less. Ball plasmoids are considered to be a laboratory analogue of natural ball lightning, a phenomenon that has eluded scientific explanation for centuries. We are searching for the underlying physicochemical mechanism(s) by which ball plasmoids and (by extension) ball lightning are stabilized using a variety of diagnostic techniques. This presentation will focus on optical emission spectroscopy (OES) of ball plasmoid discharges between 190-850 nm. The previous generation of OES measurements of this system showed emission from only a few atomic and molecular species, however, the energy available for the discharges in these experiments was limited by the size of the capacitor banks and voltages to which the capacitor banks were charged. We are capable of generating plasmoids at much higher energies, and as a result we are the first to report a very rich chemistry previously not observed in ball plasmoids. We have identified signals from species including NO A^{2}Σ^{+}→X^{2}Π, OH A^{2}Σ^{+}→X^{2}Π, NH A^{3}Π→X^{3}Σ^{-}, AlO A^{2}Π→X^{2}Σ^{+}, NH^{+} B^{2}Δ→X^{2}Π, W I, Al I, Cu I, and H_{α}, all of which have not yet been reported for this system. Analysis of the emission spectra and fitting procedures will be discussed, rotational temperatures of constituent species will be reported, and theories of ball plasmoid stabilization based upon these new results will be presented. Versteegh, A.; Behringer, K.; Fantz, U.; Fussman, G.; Jüttner, B.; Noack, S. Plas. Sour. Sci. Technol. 2008, 17(2), 024014 Stephan, K. D.; Dumas, S.; Komala-Noor, L.; McMinn, J. Plas. Sour. Sci. Technol. 2013, 22(2), 025018

  3. Korporatīvā kultūra, komunikācijas procesi un darbinieku lojalitāte tirdzniecības uzņēmumā X

    OpenAIRE

    Vīra, Ilze

    2009-01-01

    Bakalaura darba tēma ir „Korporatīvā kultūra, komunikācijas procesi un darbinieku lojalitāte tirdzniecības uzņēmumā X”. Darba mērķis ir izpētīt Uzņēmuma X komunikāciju procesus, analizēt organizācijas kultūru un darbinieku lojalitāti. Darbs sastāv no teorētiskā un praktiskās daļas. Pirmajā nodaļā tiek apskatīts komunikācijas process un starplīmeņu komunikācijas veidi, tiek skaidrots organizāciju kultūras jēdziens, plašāk pievēršoties dažādu organizācijas kultūru definīciju apskata...

  4. The strange flight behaviour of slowly spinning soccer balls

    Science.gov (United States)

    Mizota, Taketo; Kurogi, Kouhei; Ohya, Yuji; Okajima, Atsushi; Naruo, Takeshi; Kawamura, Yoshiyuki

    2013-05-01

    The strange three-dimensional flight behaviour of slowly spinning soccer balls is one of the most interesting and unknown phenomenon associated with the trajectories of sports balls. Many spectators have experienced numerous exciting and emotional instances while observing the curious flight behaviour of these balls. We examine the aerodynamic mechanisms of erratic ball behaviours through real flight observations, unsteady force measurements and flow pattern visualisations. The strange behaviour is elucidated by the relationship between the unsteady forces on the ball and the wake flow. The irregular changes in position for twin longitudinal vortices have already been discovered in the supercritical Reynolds number region of a sphere with a smooth surface. This finding is applicable to the strange behaviour of the flight of soccer balls with this supercritical flow. The players, spectators, and television viewers will gain greater insight into the effects of soccer ball flights.

  5. Ball Machine Usage in Tennis: Movement Initiation and Swing Timing While Returning Balls from a Ball Machine and from a Real Server

    Directory of Open Access Journals (Sweden)

    Jan Carboch, Vladimir Süss, Tomas Kocib

    2014-06-01

    Full Text Available Practicing with the use of a ball machine could handicap a player compared to playing against an actual opponent. Recent studies have shown some differences in swing timing and movement coordination, when a player faces a ball projection machine as opposed to a human opponent. We focused on the time of movement initiation and on stroke timing during returning tennis serves (simulated by a ball machine or by a real server. Receivers’ movements were measured on a tennis court. In spite of using a serving ball speed from 90 kph to 135 kph, results showed significant differences in movement initiation and backswing duration between serves received from a ball machine and serves received from a real server. Players had shorter movement initiation when they faced a ball machine. Backswing duration was longer for the group using a ball machine. That demonstrates different movement timing of tennis returns when players face a ball machine. Use of ball machines in tennis practice should be limited as it may disrupt stroke timing.

  6. The Influence of Face Angle and Club Path on the Resultant Launch Angle of a Golf Ball

    Directory of Open Access Journals (Sweden)

    Paul Wood

    2018-02-01

    Full Text Available A two-part experimental study was conducted in order to better understand how the delivered face angle and club path of a golf club influences the initial launch direction of a golf ball for various club types. A robust understanding of how these parameters influence the ball direction has implications for both coaches and club designers. The first study used a large sample of golfers hitting shots with different clubs. Initial ball direction was measured with a Foresight Sports camera system, while club delivery parameters were recorded with a Vicon motion capture system. The second study used a golf robot and Vision Research camera to measure club and ball parameters. Results from these experiments show that the launch direction fell closer to face angle than club path. The percent toward the face angle ranged from 61% to 83%, where 100% designates a launch angle entirely toward the face angle.

  7. The Vanishing Ball Illusion: A new perspective on the perception of dynamic events.

    Science.gov (United States)

    Kuhn, Gustav; Rensink, Ronald A

    2016-03-01

    Our perceptual experience is largely based on prediction, and as such can be influenced by knowledge of forthcoming events. This susceptibility is commonly exploited by magicians. In the Vanishing Ball Illusion, for example, a magician tosses a ball in the air a few times and then pretends to throw the ball again, whilst secretly concealing it in his hand. Most people claim to see the ball moving upwards and then vanishing, even though it did not leave the magician's hand (Kuhn & Land, 2006; Triplett, 1900). But what exactly can such illusions tell us? We investigated here whether seeing a real action before the pretend one was necessary for the Vanishing Ball Illusion. Participants either saw a real action immediately before the fake one, or only a fake action. Nearly one third of participants experienced the illusion with the fake action alone, while seeing the real action beforehand enhanced this effect even further. Our results therefore suggest that perceptual experience relies both on long-term knowledge of what an action should look like, as well as exemplars from the immediate past. In addition, whilst there was a forward displacement of perceived location in perceptual experience, this was not found for oculomotor responses, consistent with the proposal that two separate systems are involved in visual perception. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Improving the working performance of automatic ball balancer by modifying its mechanism

    Science.gov (United States)

    Rezaee, Mousa; Fathi, Reza

    2015-12-01

    An automatic ball balancer consists of several balls that are free to move in the circular race containing a damping fluid. Although a traditional ABB can improve the vibration behavior of an unbalanced rotor under proper working conditions, at speeds below the first critical speed, it makes the vibration amplitude of the rotor larger than that of a rotor without an automatic ball balancer. Moreover, it has a limited stable region of the perfect balancing configuration. Considering these deficiencies, in this study a new design for automatic ball balancer is proposed. To analyze the problem, the nonlinear governing equations of a rotor equipped with the new ABB are derived using Lagrange's equations. Then, stability analysis is carried out on the basis of linearized equations of motion around the equilibrium positions to obtain the stable region of the system. It is shown that the new ABB can prevent the rotor from increasing the vibrations at the transient state. Also, it increases the stable region of the perfect balancing configuration. Comparing the results with those corresponding to the traditional ball balancer shows that the new ABB can reduce the vibration amplitude at speeds below the first critical speed and it increases the stable region of the perfect balancing configuration.

  9. Influence of controller parameters on the life of ball screw feed drives

    Directory of Open Access Journals (Sweden)

    Stefano Mauro

    2015-08-01

    Full Text Available The ball screws are the machine component most frequently used for transforming rotational into linear motion of a feed drive, to position the machine tool components carrying the cutting tool to the desired location. A failure of the ball screw usually leads to a total breakdown of the axis; therefore, the attainable life of this component is an important issue concerning the availability and productivity of modern machine tools. This article presents an approach to evaluate the influence of control parameters on the fatigue life of ball screws based on simulation, by means of a numerical model of a machine tool servo-axis. Ball screw life was evaluated with different conditions, varying the position loop main proportional gain and the kinematic limit conditions for trajectory generation. Furthermore, the mathematical model was used to evaluate optimal control gain and trajectory conditions for a machine tool based on the achievable life span of the ball screw feed drive system, with regard to the desirable performances, such as position accuracy, promptness, and cutoff frequency.

  10. Casimir Energies for Isorefractive or Diaphanous Balls

    Directory of Open Access Journals (Sweden)

    Kimball A. Milton

    2018-03-01

    Full Text Available It is known that the Casimir self-energy of a homogeneous dielectric ball is divergent, although a finite self-energy can be extracted through second order in the deviation of the permittivity from the vacuum value. The exception occurs when the speed of light inside the spherical boundary is the same as that outside, so the self-energy of a perfectly conducting spherical shell is finite, as is the energy of a dielectric-diamagnetic sphere with ε μ = 1 , a so-called isorefractive or diaphanous ball. Here we re-examine that example and attempt to extend it to an electromagnetic δ -function sphere, where the electric and magnetic couplings are equal and opposite. Unfortunately, although the energy expression is superficially ultraviolet finite, additional divergences appear that render it difficult to extract a meaningful result in general, but some limited results are presented.

  11. From a Ball Game to Incompleteness

    Indian Academy of Sciences (India)

    tree is a tree in which each node has a finite number of children. In a rooted tree, the sequence of nodes from the root to a leaf, where the (j + 1)th node is a child of the jth node, is called a. 'path'. For instance, in the above tree, the root contains 2, and all leafs are the nodes that contain 0. Since any ball is replaced with a fi-.

  12. Free-floating atmospheric pressure ball plasmas

    Science.gov (United States)

    Wurden, G. A.; Ticos, C.; Wang, Z.; Wurden, C. J. V.

    2007-11-01

    A long-lived (0.3 second, 10-20 cm diameter) ball plasma floating in the air above a water surface has been formed and studied in the laboratory. A 0.4 - 1 mF capacitor is charged to 4-5 kV, and subsequently discharged (30-60 Amps, 20-50 msec duration) into central copper cathode held fixed just below the surface of a bucket of water (with a weak solution of various salts in distilled water, such as CuSO4 or CuCl2, LiCl or NaCl). An underwater ring anode completes the circuit. A bubble of hot vapor from the water surface rises up in the first few milliseconds, and changes from a mushroom cloud with stalk, to a detached quasi-spherical object, finally evolving into a vortex ring. The plasma consists of ionized water vapor, with positive salts and OH- radicals, as well as molecular species, and it completely excludes nitrogen or oxygen from the rising plasma structure. A fine boundary layer is visible in orange, in contrast to a green ball interior when using Cu/CuSO4, and filamentary structures are visible at late times. Finally, a whisp of smoke ring is observed as a residue. A variety of visible and infrared imaging (both video and still cameras) are used, along with 200-800 nm time & space resolved spectroscopy, to identify features of this laboratory analog to ball lightning. Possible applications include a windowless ball- plasma powered pulsed copper vapor laser operating at 510 nm.

  13. Relativistic-microwave theory of ball lightning

    OpenAIRE

    H.-C. Wu

    2016-01-01

    Ball lightning, a fireball sometimes observed during lightnings, has remained unexplained. Here we present a comprehensive theory for the phenomenon: At the tip of a lightning stroke reaching the ground, a relativistic electron bunch can be produced, which in turn excites intense microwave radiation. The latter ionizes the local air and the radiation pressure evacuates the resulting plasma, forming a spherical plasma bubble that stably traps the radiation. This mechanism is verified by partic...

  14. Ball-thrower's fracture of the humerus

    International Nuclear Information System (INIS)

    Callaghan, Eric B.; Bennett, D. Lee; El-Khoury, Georges Y.; Ohashi, Kenjirou

    2004-01-01

    A relatively rare case of ball-thrower's fracture of the humerus is presented. Severe muscular action is an uncommon cause of humeral fractures but has been well documented in the orthopedic literature. To our knowledge, this fracture has not been described in the radiology literature, and awareness of this entity could preclude further unnecessary workup. The mechanism of injury and its typical radiographic appearance is described. (orig.)

  15. Effect of Changing Table Tennis Ball Material from Celluloid to Plastic on the Post-Collision Ball Trajectory

    Directory of Open Access Journals (Sweden)

    Inaba Yuki

    2017-01-01

    Full Text Available The official material used in table tennis balls was changed from celluloid to plastic, a material free of celluloid, in 2014. The purpose of this study was to understand the differences and similarities in the two types of ball materials by comparing their behavior upon collision with a table. The behavior of the balls before and after collision with a table, at various initial speeds ranging from 15 to 115 km/h, was captured using high-speed cameras. Velocities and spin rates before collision and velocities after collision were computed to calculate the coefficients of restitution and friction. Based on the computed variables, the post-collision trajectories of both balls were calculated by integrating the equation of motion of the ball for simulated service, smash and drive conditions with respect to time. The coefficients of restitution were higher for the plastic balls than the celluloid ones when the initial vertical velocities were higher. The coefficients of friction were higher for plastic balls when the initial horizontal contact point velocities were slower. Because of the differences in the material characteristics, the plastic ball trajectories of services with backspin and drives with great topspin were expected to be different from those of celluloid balls. Since the extent of differences between the two ball types varied depending on the initial conditions, testing at various initial conditions was suggested for comparing and understanding the characteristics of the balls.

  16. Effect of Changing Table Tennis Ball Material from Celluloid to Plastic on the Post-Collision Ball Trajectory.

    Science.gov (United States)

    Inaba, Yuki; Tamaki, Sho; Ikebukuro, Haruhiko; Yamada, Koshi; Ozaki, Hiroki; Yoshida, Kazuto

    2017-01-01

    The official material used in table tennis balls was changed from celluloid to plastic, a material free of celluloid, in 2014. The purpose of this study was to understand the differences and similarities in the two types of ball materials by comparing their behavior upon collision with a table. The behavior of the balls before and after collision with a table, at various initial speeds ranging from 15 to 115 km/h, was captured using high-speed cameras. Velocities and spin rates before collision and velocities after collision were computed to calculate the coefficients of restitution and friction. Based on the computed variables, the post-collision trajectories of both balls were calculated by integrating the equation of motion of the ball for simulated service, smash and drive conditions with respect to time. The coefficients of restitution were higher for the plastic balls than the celluloid ones when the initial vertical velocities were higher. The coefficients of friction were higher for plastic balls when the initial horizontal contact point velocities were slower. Because of the differences in the material characteristics, the plastic ball trajectories of services with backspin and drives with great topspin were expected to be different from those of celluloid balls. Since the extent of differences between the two ball types varied depending on the initial conditions, testing at various initial conditions was suggested for comparing and understanding the characteristics of the balls.

  17. CVD carbon powders modified by ball milling

    Directory of Open Access Journals (Sweden)

    Kazmierczak Tomasz

    2015-09-01

    Full Text Available Carbon powders produced using a plasma assisted chemical vapor deposition (CVD methods are an interesting subject of research. One of the most interesting methods of synthesizing these powders is using radio frequency plasma. This method, originally used in deposition of carbon films containing different sp2/sp3 ratios, also makes possible to produce carbon structures in the form of powder. Results of research related to the mechanical modification of these powders have been presented. The powders were modified using a planetary ball mill with varying parameters, such as milling speed, time, ball/powder mass ratio and additional liquids. Changes in morphology and particle sizes were measured using scanning electron microscopy and dynamic light scattering. Phase composition was analyzed using Raman spectroscopy. The influence of individual parameters on the modification outcome was estimated using statistical method. The research proved that the size of obtained powders is mostly influenced by the milling speed and the amount of balls. Powders tend to form conglomerates sized up to hundreds of micrometers. Additionally, it is possible to obtain nanopowders with the size around 100 nm. Furthermore, application of additional liquid, i.e. water in the process reduces the graphitization of the powder, which takes place during dry milling.

  18. 3D Printing of Ball Grid Arrays

    Science.gov (United States)

    Sinha, Shayandev; Hines, Daniel; Dasgupta, Abhijit; Das, Siddhartha

    Ball grid arrays (BGA) are interconnects between an integrated circuit (IC) and a printed circuit board (PCB), that are used for surface mounting electronic components. Typically, lead free alloys are used to make solder balls which, after a reflow process, establish a mechanical and electrical connection between the IC and the PCB. High temperature processing is required for most of these alloys leading to thermal shock causing damage to ICs. For producing flexible circuits on a polymer substrate, there is a requirement for low temperature processing capabilities (around 150 C) and for reducing strain from mechanical stresses. Additive manufacturing techniques can provide an alternative methodology for fabricating BGAs as a direct replacement for standard solder bumped BGAs. We have developed aerosol jet (AJ) printing methods to fabricate a polymer bumped BGA. As a demonstration of the process developed, a daisy chain test chip was polymer bumped using an AJ printed ultra violet (UV) curable polymer ink that was then coated with an AJ printed silver nanoparticle laden ink as a conducting layer printed over the polymer bump. The structure for the balls were achieved by printing the polymer ink using a specific toolpath coupled with in-situ UV curing of the polymer which provided good control over the shape, resulting in well-formed spherical bumps on the order of 200 um wide by 200 um tall for this initial demonstration. A detailed discussion of the AJ printing method and results from accelerated life-time testing will be presented

  19. Relation Between Hertz Stress-Life Exponent, Ball-Race Conformity, and Ball Bearing Life

    Science.gov (United States)

    Zaretsky, Erwin V.; Poplawski, Joseph V.; Root, Lawrence E.

    2008-01-01

    ANSI/ABMA and ISO standards based on Lundberg-Palmgren bearing life theory are normalized for ball bearings having inner- and outerrace conformities of 52 percent (0.52) and made from pre-1940 bearing steel. The Lundberg-Palmgren theory incorporates an inverse 9th power relation between Hertz stress and fatigue life for ball bearings. The effect of race conformity on ball set life independent of race life is not incorporated into the Lundberg-Palmgren theory. In addition, post-1960 vacuum-processed bearing steel exhibits a 12th power relation between Hertz stress and life. The work reported extends the previous work of Zaretsky, Poplawski, and Root to calculate changes in bearing life--that includes the life of the ball set--caused by race conformity, Hertz stress-life exponent, ball bearing type and bearing series. The bearing fatigue life in actual application will usually be equal to or greater than that calculated using the ANSI/ABMA and ISO standards that incorporate the Lundberg-Palmgren theory. The relative fatigue life of an individual race is more sensitive to changes in race conformity for Hertz stress-life exponent n of 12 than where n = 9. However, when the effects are combined to predict actual bearing life for a specified set of conditions and bearing geometry, the predicted life of the bearing will be greater for a value of n = 12 than n = 9.

  20. A vision framework for the localization of soccer players and ball on the pitch using Handycams

    Science.gov (United States)

    Vilas, Tiago; Rodrigues, J. M. F.; Cardoso, P. J. S.; Silva, Bruno

    2015-03-01

    The current performance requirements in soccer make imperative the use of new technologies for game observation and analysis, such that detailed information about the teams' actions is provided. This paper summarizes a framework to collect the soccer players and ball positions using one or more Full HD Handycams, placed no more than 20cm apart in the stands, as well as how this framework connects to the FootData project. The system was based on four main modules: the detection and delimitation of the soccer pitch, the ball and the players detection and assignment to their teams, the tracking of players and ball and finally the computation of their localization (in meters) in the pitch.

  1. Sitting on stability balls: biomechanics evaluation in a workplace setting.

    Science.gov (United States)

    Schult, Tamara M; Awosika, Ebi R; Schmunk, Sandra K; Hodgson, Michael J; Heymach, Bria L; Parker, Celestine Dent

    2013-01-01

    Use of a stability ball alone and stability ball chair were evaluated in the Veterans Health Administration as possible alternatives to incorporate with regular office chair use. The evaluation of stability ball use was conducted under the auspices of a work site health promotion program as a cross-over trial with participants rotating through use of the stability ball, stability ball chair, and regular office chair on a monthly basis for a total duration of 3 months. Rotations on regular office chairs served as the control. Three medical facilities participated. A total of 193 employees completed a baseline questionnaire; 159 completed at least one post-rotation questionnaire. Self-reported measures included perceived posture when sitting, perceptions of overall balance, energy levels, job performance, safety, and pain. Use was associated with improvements in perceived posture (p balance (p = 0.05) for stability ball chair users compared with the control. Use of stability balls at work decreases the likelihood of reporting pain from regular office chair use from approximately 45% to 21%. Alternatively, a high number of participants reported pain with use of the stability ball alone and stability ball chair, 42% and 45%, respectively. The perceived risks and benefits of stability ball use should be weighed when incorporating use.

  2. Aerodynamics in the classroom and at the ball park

    Science.gov (United States)

    Cross, Rod

    2012-04-01

    Experiments suitable for classroom projects or demonstrations are described concerning the aerodynamics of polystyrene balls. A light ball with sufficient backspin can curve vertically upward through the air, defying gravity and providing a dramatic visual demonstration of the Magnus effect. A ball projected with backspin can also curve downward with a vertical acceleration greater than that due to gravity if the Magnus force is negative. These effects were investigated by filming the flight of balls projected in an approximately horizontal direction so that the lift and drag forces could be easily measured. The balls were also fitted with artificial raised seams and projected with backspin toward a vertical target in order to measure the sideways deflection over a known horizontal distance. It was found that (a) a ball with a seam on one side can deflect either left or right depending on its launch speed and (b) a ball with a baseball seam can also deflect sideways even when there is no sideways component of the drag or lift forces acting on the ball. Depending on the orientations of the seam and the spin axis, a sideways force on a baseball can arise either if there is rough patch on one side of the ball or if there is a smooth patch. A scuff ball with a rough patch on one side is illegal in baseball. The effect of a smooth patch is a surprising new observation.

  3. Automatic ball bar for a coordinate measuring machine

    Science.gov (United States)

    Jostlein, Hans

    1997-01-01

    An automatic ball bar for a coordinate measuring machine determines the accuracy of a coordinate measuring machine having at least one servo drive. The apparatus comprises a first and second gauge ball connected by a telescoping rigid member. The rigid member includes a switch such that inward radial movement of the second gauge ball relative to the first gauge ball causes activation of the switch. The first gauge ball is secured in a first magnetic socket assembly in order to maintain the first gauge ball at a fixed location with respect to the coordinate measuring machine. A second magnetic socket assembly secures the second gauge ball to the arm or probe holder of the coordinate measuring machine. The second gauge ball is then directed by the coordinate measuring machine to move radially inward from a point just beyond the length of the ball bar until the switch is activated. Upon switch activation, the position of the coordinate measuring machine is determined and compared to known ball bar length such that the accuracy of the coordinate measuring machine can be determined.

  4. Biomechanics of Heading a Soccer Ball: Implications for Player Safety

    Directory of Open Access Journals (Sweden)

    Charles F. Babbs

    2001-01-01

    Full Text Available To better understand the risk and safety of heading a soccer ball, the author created a set of simple mathematical models based upon Newton�s second law of motion to describe the physics of heading. These models describe the player, the ball, the flight of the ball before impact, the motion of the head and ball during impact, and the effects of all of these upon the intensity and the duration of acceleration of the head. The calculated head accelerations were compared to those during presumably safe daily activities of jumping, dancing, and head nodding and also were related to established criteria for serious head injury from the motor vehicle crash literature. The results suggest heading is usually safe but occasionally dangerous, depending on key characteristics of both the player and the ball. Safety is greatly improved when players head the ball with greater effective body mass, which is determined by a player�s size, strength, and technique. Smaller youth players, because of their lesser body mass, are more at risk of potentially dangerous headers than are adults, even when using current youth size balls. Lower ball inflation pressure reduces risk of dangerous head accelerations. Lower pressure balls also have greater “touch” and “playability”, measured in terms of contact time and contact area between foot and ball during a kick. Focus on teaching proper technique, the re-design of age-appropriate balls for young players with reduced weight and inflation pressure, and avoidance of head contact with fast, rising balls kicked at close range can substantially reduce risk of subtle brain injury in players who head soccer balls.

  5. A general theory for ball lightning structure and light output

    Science.gov (United States)

    Morrow, R.

    2018-03-01

    A general theory for free-floating ball lightning is presented which unifies the phantom plasma ball theory involving the production of very little light, with theories for ball lightning involving light output produced by burning particles from the soil. The mechanism for the formation of plasma balls is shown to be quite general, producing very similar plasma balls independent of initial ion densities over four orders of magnitude. All that is required is an excess of positive ions in the initial ball of ions. The central plasma density after 1 s is shown to be the reciprocal of the ion neutralization coefficient for all cases, both analytically and computationally. Further, the plasma region has zero electric field in all cases. Surrounding the plasma ball is a sphere of positive ions moving away from the centre via their own space-charge field; this space-charge field, which is the same in all cases near the plasma ball, drives negative ions and negative particles towards the plasma centre. The connection with burning particle theories is the proposition that the burning particles are highly-charged which is very likely after a lightning strike. Burning negatively charged particles would be driven into the plasma ball region and trapped while any positively charged particles would be driven away. The plasma ball structure is shown to last more than 10 s and the ‘burnout time’ for a typical coal particle (as an example) has been measured at 5–10 s this is comparable with the lifetimes observed for ball lightning. The light output from a few hundred particles is estimated to be ~1 W, a typical output for ball lightning. Finally, suggestions are made for the generation of ball lightning in the laboratory.

  6. Finite element modelling of the dynamics of groovy ball bearings

    Directory of Open Access Journals (Sweden)

    Ajala Olamide

    2018-01-01

    Full Text Available Geometry modified thrust bearings exposed to rolling and sliding contact are subjected to wear and localized frictional heating caused by relative slip between the two sliding surfaces. This leads to a rise in temperature, thermal stresses and changes in the elastic and plastic strength and physical properties of the material. The changes in the properties in turn alter the stress state, the displacement field, life and reliability of the bearing. Hence, a finite-element model is created to study the dynamics of groovy thrust bearing. In this paper, Hertz contact theory and numerical method are used to simulate the dynamics and kinematics of groovy ball bearings. The optimal loading parameters are identified in this study based on the analysis of the system responses and properties. The results of the numerical analysis and validation are presented. The numerical analysis proves the concept of transforming rotational motion into axial oscillation and demonstrates the capabilities of the numerical simulation to accurately model the dynamics of the groovy ball bearing.

  7. Analytical and experimental investigation of the static friction regime for rubber-rigid ball contact

    NARCIS (Netherlands)

    Deladi, E.L.; de Rooij, Matthias B.; de Vries, Erik G.; de Vries, Erik G.; Schipper, Dirk J.

    2006-01-01

    The static friction regime is of great importance for systems requiring accurate positioning. The parameters of the static friction regime in terms of static friction force and limiting displacement before gross sliding are investigated for a rubber ball/metal flat configuration. Single-asperity

  8. High dimensional bowling - n-dimensional ball rolling on (n-1)-dimensional surface

    DEFF Research Database (Denmark)

    Deryabin, M.V.; Hjorth, Poul G.

    2003-01-01

    We consider the non-holonomic system of a n-dimensional ball rolling on a (n - 1)-dimensional surface. We discuss the structure of the equations of motion, the existence of an invariant measure and some generalizations of the problem....

  9. Effect of Practicing Soccer Juggling With Different Sized Balls Upon Performance, Retention, and Transfer to Ball Reception.

    Science.gov (United States)

    Raastad, Olav; Aune, Tore Kristian; van den Tillaar, Roland

    2016-10-01

    The aim of this study was to investigate if making the skill acquisition phase more difficult or easier would enhance performance in soccer juggling, and if this practice has a positive intertask transfer effect to ball reception performance. Twenty-two adolescent soccer players were tested in juggling a soccer ball and in the control of an approaching ball at a pre, post and retention test. The participants were randomly divided in a small ball size and bigger ball size training group that both trained four times per week for 6 weeks. At the post and retention test both groups enhanced performance in soccer juggling test with no difference between groups and no increase in ball reception performance at these tests. It was concluded that about intra task transfer and retention of soccer juggling skills, it does not matter if you increase (small balls) or decrease the difficulty (larger balls) when using the same amount of practice time within the skill acquisition phase in soccer juggling. In addition that for ball juggling and ball reception (inter task) these two tasks differ too much in afferent information and movement characteristics that no positive transfer between these two skills no positive intertask transfer can be expected.

  10. Magnetohydrodynamics equilibrium of a self-confined elliptical plasma ball

    Energy Technology Data Exchange (ETDEWEB)

    Wu, H. (CCAST (World Laboratory) P. O. Box 8730, Beijing 100080 and Institute of Mechanics, Academia Sinica, Beijing, People' s Republic of China (CN)); Oakes, M.E. (Department of Physics, University of Texas at Austin, Austin, Texas 78712 (USA))

    1991-08-01

    A variational principle is applied to the problem of magnetohydrodynamics (MHD) equilibrium of a self-contained elliptical plasma ball, such as elliptical ball lightning. The principle is appropriate for an approximate solution of partial differential equations with arbitrary boundary shape. The method reduces the partial differential equation to a series of ordinary differential equations and is especially valuable for treating boundaries with nonlinear deformations. The calculations conclude that the pressure distribution and the poloidal current are more uniform in an oblate self-confined plasma ball than that of an elongated plasma ball. The ellipticity of the plasma ball is obviously restricted by its internal pressure, magnetic field, and ambient pressure. Qualitative evidence is presented for the absence of sighting of elongated ball lightning.

  11. Burning molten metallic spheres: One class of ball lightning?

    Science.gov (United States)

    Stephan, Karl D.; Massey, Nathan

    2008-08-01

    Abrahamson and Dinniss [2000. Ball lightning caused by oxidation of nanoparticle networks from normal lightning strikes on soil. Nature 403, 519-521] proposed a theory of ball lighting in which silicon nanoparticles undergo slow oxidation and emit light. Paiva et al. [2007. Production of ball-lightning-like luminous balls by electrical discharges in silicon. Physical Review Letters 98, 048501] reported that an electric arc to silicon produced long-lasting luminous white spheres showing many characteristics of ball lightning. We show experimentally that these consist of burning molten silicon spheres with diameters in the 0.1-1 mm range. The evidence of our experiments leads us to propose that a subset of ball lightning events may consist of macro-scale molten spheres of burning metallic materials likely to be ejected from a conventional lightning strike to earth.

  12. The heads and tails of buoyant autocatalytic balls

    Science.gov (United States)

    Rogers, Michael C.; Morris, Stephen W.

    2012-09-01

    Buoyancy produced by autocatalytic reaction fronts can produce fluid flows that advect the front position, giving rise to interesting feedback between chemical and hydrodynamic effects. In this paper, we numerically investigate the evolution of autocatalytic iodate-arsenous acid reaction fronts initialized in spherical configurations. Deformation of these "autocatalytic balls" is driven by buoyancy produced by the reaction. In our simulations, we have found that depending on the initial ball radius, the reaction front will develop in one of three different ways. In an intermediate range of ball size, the flow can evolve much like an autocatalytic plume: the ball develops a reacting head and tail that is akin to the head and conduit of an autocatalytic plume. In the limit of large autocatalytic balls, however, growth of a reacting tail is suppressed and the resemblance to plumes disappears. Conversely, very small balls of product solution fail to initiate sustained fronts and eventually disappear.

  13. THE INFLUENCE OF BALL VELOCITY AND COURT ILLUMINATION ON REACTION TIME FOR TENNIS VOLLEY

    Directory of Open Access Journals (Sweden)

    Jui-hung Tu

    2010-03-01

    Full Text Available The he purpose of this study is to examine the effects of ball velocity, court illumination, and volley type on the reaction time (RT of a tennis athlete for a volley stroke. Eights cases with two different ball velocities (high and low, two volley types (forehand and backhand and two court illumination levels (dark and bright were studied. The 30 participating subjects consisted of 18 male and 12 female college tennis athletes (age: 24 ± 3.2 yr, with a United States Tennis Association (USTA ranking above 2.5. In order to ensure the validity of real-world correlations, the experiments were designed to simulate real competition situations. Reaction times were measured for volley strokes in response to different approaching ball velocities (high: 25.05 ± 0.37 m/s and low: 17.56 ± 0.92 m·s-1 for several volley types (forehand and backhand and court illumination levels (55649 ± 4292 lux and 363.24 ± 6.53 lux on the court. During the tests, the signals from an electromyogram sensor and a 3-axis accelerometer (± 50 g were recorded using an NI DAQ card (NI PXI-6251 and then analyzed to determine reaction time (RT, premotor reaction time (PRT, and motor reaction time (MRT through the LabVIEW system. Subsequent 3-way ANOVA analysis indicated no RT, PRT, or MRT interaction between ball velocity, volley type and illumination. The ball velocity and illumination parameters did affect RT and PRT values significantly with p < 0.05, no significant variation in MRT was observed across any implemented experimental conditions. All experimental results indicate that ball velocity and illumination levels strongly affect the value of PRT, but have no significant effect on the value of MRT, the changes in RT were dominated by PRT

  14. Ball lightning as a spherical plasma configuration of relevance to industrial plasma engineering

    International Nuclear Information System (INIS)

    Roth, J.R.

    1992-01-01

    One of the most interesting spherical plasma configurations found in nature is ball lightning, which has been extensively observed in atmospheric air, usually in association with thunderstorms. If the physical processes responsible for ball lightning were understood, this knowledge would have very interesting implications not only for fusion research, but also for industrial plasma engineering. The ability to create a steady-state atmospheric glow discharge would allow many surface modification and other plasma processing applications to be carried out under atmospheric conditions, rather than in expensive vacuum systems which enforce batch processing operations. The existence of ball lightning offers encouragement for the belief that a steady-state atmospheric glow discharge may be possible. Much progress has been made in theoretical attempts to understand ball lightning, perhaps the most comprehensive of which is the Koloc model. This and related models have not satisfactorily dealt with the long plasma lifetimes in the face of electron scattering at atmospheric density. This leads to an unsatisfactory aspect of the Koloc model, the requirement of a shell of relativistic electrons with very low Coulomb scattering cross sections. This last major conceptual roadblock in understanding ball lightning may have been removed by the recent suggestion of Witalis who pointed out that atmospheric gases, or their products, can exhibit the Ramsauer effect, extremely low electron scattering cross sections at low electron kinetic temperatures, on the order of one eV. This recent progress in ball lightning models has stimulated research aimed at producing a steady state glow discharge in air at atmospheric pressure. Such a glow discharge in argon with a few ppm of acetone has been reported by Kanda, et al. At the UTK Plasma Science Laboratory, the authors have generated at 2.8 liter plasma in a steady-state atmospheric pressure glow discharge in helium and other gases

  15. Ball lightning observation: an objective video-camera analysis report

    OpenAIRE

    Sello, Stefano; Viviani, Paolo; Paganini, Enrico

    2011-01-01

    In this paper we describe a video-camera recording of a (probable) ball lightning event and both the related image and signal analyses for its photometric and dynamical characterization. The results strongly support the BL nature of the recorded luminous ball object and allow the researchers to have an objective and unique video document of a possible BL event for further analyses. Some general evaluations of the obtained results considering the proposed ball lightning models conclude the paper.

  16. Nonlinear control via approximate input-output linearization - The ball and beam example

    Science.gov (United States)

    Hauser, John; Sastry, Shankar; Kokotovic, Petar

    1992-01-01

    A study is made of approximate input-output linearization of nonlinear systems which fail to have a well defined relative degree. For such systems, a method is provided for constructing approximate systems that are input-output linearizable. The analysis presented in this note is motivated through its application to a common undergraduate control laboratory experiment, the ball and beam system, where it is shown to be more effective for trajectory tracking than the standard Jacobian linearization.

  17. LOW COMPRESSION TENNIS BALLS AND SKILL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    John Hammond

    2006-12-01

    Full Text Available Coaching aims to improve player performance and coaches have a number of coaching methods and strategies they use to enhance this process. If new methods and ideas can be determined to improve player performance they will change coaching practices and processes. This study investigated the effects of using low compression balls (LCBs during coaching sessions with beginning tennis players. In order to assess the effectiveness of LCBs on skill learning the study employed a quasi-experimental design supported by qualitative and descriptive data. Beginner tennis players took part in coaching sessions, one group using the LCBs while the other group used standard tennis balls. Both groups were administered a skills at the beginning of a series of coaching sessions and again at the end. A statistical investigation of the difference between pre and post-test results was carried out to determine the effect of LCBs on skill learning. Additional qualitative data was obtained through interviews, video capture and the use of performance analysis of typical coaching sessions for each group. The skill test results indicated no difference in skill learning when comparing beginners using the LCBs to those using the standard balls. Coaches reported that the LCBs appeared to have a positive effect on technique development, including aspects of technique that are related to improving power of the shot. Additional benefits were that rallies went on longer and more opportunity for positive reinforcement. In order to provide a more conclusive answer to the effects of LCBs on skill learning and technique development recommendations for future research were established including a more controlled experimental environment and larger sample sizes across a longer period of time

  18. CFD Analysis of Swing of Cricket Ball and Trajectory Prediction

    Science.gov (United States)

    G, Jithin; Tom, Josin; Ruishikesh, Kamat; Jose, Jyothish; Kumar, Sanjay

    2013-11-01

    This work aims to understand the aerodynamics associated with the flight and swing of a cricket ball and predict its flight trajectory over the course of the game: at start (smooth ball) and as the game progresses (rough ball). Asymmetric airflow over the ball due to seam orientation and surface roughness can cause flight deviation (swing). The values of Drag, Lift and Side forces which are crucial for determining the trajectory of the ball were found with the help of FLUENT using the standard K- ɛ model. Analysis was done to study how the ball velocity, spin imparted to be ball and the tilt of the seam affects the movement of the ball through air. The governing force balance equations in 3 dimensions in combination a MATLAB code which used Heun's method was used for obtaining the trajectory of the ball. The conditions for the conventional swing and reverse swing to occur were deduced from the analysis and found to be in alignment with the real life situation. Critical seam angle for maximum swing and transition speed for normal to reverse swing were found out. The obtained trajectories were compared to real life hawk eye trajectories for validation. The analysis results were in good agreement with the real life situation.

  19. Promoting ball skills in preschool-age girls.

    Science.gov (United States)

    Veldman, Sanne L C; Palmer, Kara K; Okely, Anthony D; Robinson, Leah E

    2017-01-01

    Evidence supports that girls are less proficient than boys at performing ball skills. This study examined the immediate and long-term effects of a ball skill intervention on preschool-age girls' ball skill performance. Randomized controlled trial. Girls (M age =47.24±7.38 months) were randomly assigned to a high autonomy, mastery-based 9-week motor skill intervention (the Children's Health Activity Motor Program; CHAMP, 540min; n=38) or a control group (free-play; n=16). Ball skill proficiency was assessed at pretest, posttest, and retention test (after 9 weeks) using the object control subscale of the Test of Gross Motor Development - 2nd Edition. Treatment efficacy was examined using linear mixed models. Two models were fit: one for short-term changes (pretest to posttest) and one for long-term changes (pretest to retention). Linear mixed models revealed a significantly time*treatment interaction for both models. Post hoc analysis confirmed that girls in CHAMP experienced significant gains in ball skills from pretest to posttest (p.05) but had significantly higher ball skills scores at both posttest (pball skill intervention (i.e., CHAMP) on improving girls' ball skills both short- and long-term. Findings suggest that early childhood interventions that focus on the development of ball skills in young girls might be an avenue to improve girls' ball skill performance. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  20. Two Balls' Collision of Mass Ratio 3:1

    Science.gov (United States)

    Ogawara, Yasuo; Hull, Michael M.

    2018-04-01

    Students will sometimes ask why momentum and kinetic energy concepts are both necessary. When physics teachers demonstrate situations that require both an understanding of kinetic energy and momentum, a favorite is Newton's cradle, or a comparable demonstration of two balls of equal mass hitting each other. However, in addition to the case of two balls of equal mass, if a ball hits another ball of three times the mass with equal speed, the results are also interesting, and, like the equal-mass demonstration, both kinetic energy and momentum are critical for understanding the motion.

  1. A proposed experiment on ball lightning model

    Energy Technology Data Exchange (ETDEWEB)

    Ignatovich, Vladimir K., E-mail: v.ignatovi@gmail.com [Frank Laboratory for Neutron Physics, Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation); Ignatovich, Filipp V. [1565 Jefferson Rd., 420, Rochester, NY 14623 (United States)

    2011-09-19

    Highlights: → We propose to put a glass sphere inside an excited gas. → Then to put a light ray inside the glass in a whispering gallery mode. → If the light is resonant to gas excitation, it will be amplified at every reflection. → In ms time the light in the glass will be amplified, and will melt the glass. → A liquid shell kept integer by electrostriction forces is the ball lightning model. -- Abstract: We propose an experiment for strong light amplification at multiple total reflections from active gaseous media.

  2. Are Perytons Signatures of Ball Lightning?

    Science.gov (United States)

    Dodin, I. Y.; Fisch, N. J.

    2014-10-01

    The enigmatic downchirped signals, called "perytons," that are detected by radio telescopes in the GHz frequency range may be produced by an atmospheric phenomenon known as ball lightning (BL). If BLs act as nonstationary radio frequency cavities, their characteristic emission frequencies and evolution timescales are consistent with peryton observations, and so are general patterns in which BLs are known to occur. Based on this evidence, testable predictions are made that can confirm or rule out a causal connection between perytons and BLs. In either case, how perytons are searched for in observational data may warrant reconsideration because existing procedures may be discarding events that have the same nature as known perytons.

  3. Collective flow measured with the Plastic Ball

    International Nuclear Information System (INIS)

    Ritter, H.G.; Gutbrod, H.H.; Kampert, K.H.; Kolb, B.; Poskanzer, A.M.; Schicker, R.; Schmidt, H.R.; Siemiarczuk, T.

    1989-08-01

    The experimental results from the Plastic Ball detector have contributed vastly to the understanding of the reaction mechanism of nuclear collisions at several hundred MeV per nucleon. The discovery of the collective flow phenomena (bounce-off of spectator fragments, side-splash in the reaction plane, and squeeze-out out of the reaction plane), as they were predicted by hydrodynamical models, has led to the experimental observation of compressed nuclear matter, which is a necessary condition before one can study the equation of state in detail and search for phase transitions at higher energies. 39 refs., 9 figs., 1 tab

  4. Quenching simulation of steel grinding balls

    Energy Technology Data Exchange (ETDEWEB)

    Zapata-Hernandez, O.; Reyes, L. A.; Camurri, C.; Carrasco, C.; Garza-Monte-de-Oca, F.; Colas, R.

    2015-07-01

    The phase transformations of high carbon steel during quenching and equalizing were modelled using commercial computer packages based on the finite element method and the kinetic transformation of steel. The model was used to predict the temperature and microstructural changes taking place within balls of two different sizes that are used for grinding mineral ores. A good correlation between the temperatures measured by inserted thermocouples and those predicted by the model was obtained after modifying the thermal conductivity of the steel within the temperature domain at which mixed phases are present. The phase transformations predicted were confirmed by metallographic analyses. (Author)

  5. Results on charmonium from the Crystal Ball

    CERN Document Server

    Partridge, R; Bloom, Elliott D; Bulos, F; Burnett, T; Cavalli-Sforza, M; Chestnut, R; Coyne, D; Gaiser, J; Godfrey, G; Hofstadter, R; Kiesling, C; Kirkbride, I; Kolanoski, H; Kollmann, W; Liberman, A; O'Reilly, J; Oreglia, M J; Peck, C; Porter, F; Richardson, M; Sadrozinski, H F W; Strauch, K; Tompkins, J; Wacker, K

    1979-01-01

    Results from the Crystal Ball experiment at SPEAR are presented. A preliminary analysis of the 3 photon final state from the J/ psi (3095) and of the cascade decays of the psi '(3684) yield new upper limits on the controversial states X(2820), chi (3455) and the even C- parity state at 3.59 GeV. From inclusive gamma -ray spectra of the J/ psi and psi ' preliminary branching ratios for psi ' to chi states and upper limits for J/ psi , psi ' to eta /sub c/, eta /sub c/' are given. (15 refs).

  6. Ball Bearing Analysis with the ORBIS Tool

    Science.gov (United States)

    Halpin, Jacob D.

    2016-01-01

    Ball bearing design is critical to the success of aerospace mechanisms. Key bearing performance parameters, such as load capability, stiffness, torque, and life all depend on accurate determination of the internal load distribution. Hence, a good analytical bearing tool that provides both comprehensive capabilities and reliable results becomes a significant asset to the engineer. This paper introduces the ORBIS bearing tool. A discussion of key modeling assumptions and a technical overview is provided. Numerous validation studies and case studies using the ORBIS tool are presented. All results suggest the ORBIS code closely correlates to predictions on bearing internal load distributions, stiffness, deflection and stresses.

  7. Crystal Ball evidence for new states

    International Nuclear Information System (INIS)

    Coyne, D.G.

    1981-09-01

    Evidence for three new particles observed in the Crystal Ball detector is presented. The first particle, at 3592 MeV, is seen inclusively in γ transitions from psi', and is thus a candidate for eta/sub c/'. The other two, at 1440 and 1640 MeV, are best seen in exclusive decays of psi involving a prompt γ, and are thus candidates for bound states of two gluons. Detailed reasons are presented to support the contention that these states are distinct from previously observed candidates such as E(1420). Alternative hypotheses are discussed

  8. Tar ball Monitoring Along the Kenyan Beaches.

    OpenAIRE

    Nguta, M.

    1993-01-01

    Observations and measurements of petroleum tar balls on a number of Kenyan beaches were carried out between 1979 and 1982. A large variation in the size and amount of tar deposit at the beaches was recorded. These values ranged from very small pebbles to large lumps of 30 cm in diameter, weighing up to 1.5 kg. The average tar loading during the sampling period ranged from 0-18 g/m2. Between 25-50% by weight of the tar lumps were shell fragments, sand and other nonpetroleum debris. The chemica...

  9. RELATIONSHIP BETWEEN MEDICINE BALL EXPLOSIVE POWER TESTS, THROWING BALL VELOCITY AND JUMP PERFORMANCE IN TEAM HANDBALL PLAYERS

    Directory of Open Access Journals (Sweden)

    Mourad Fathloun

    2011-04-01

    Full Text Available In this study, the relationships between medicine ball explosive power tests, jump and handball throwing velocity performance in team handball players were investigated. Explosive test was measured by a medicine ball throw. Specific explosive strength was evaluated by making 3 types of overarm throw: standing position, using an adapted chair (without run-up, T w , a 3-step running throw (T 3-Steps and a jump shot (J S . The jump test (SJ, CMJ and FCMJ were determined using the OptoJump. The medicine ball explosive power test was closely related to T 3-Steps . Significant relationships were observed between medicine ball explosive power tests and (J S and (T w . The Medicine ball explosive power test is also positively related to vertical jump ability represented by Squat Jump (SJ and Countermovement Jump (CMJ. The results suggest an association of the medicine ball explosive power tests to performance in throwing events

  10. The information for catching fly balls : Judging and intercepting virtual balls in a CAVE

    NARCIS (Netherlands)

    Zaal, FTJM; Michaels, CF

    Visually guided action implies the existence of information as well as a control law relating that information to movement. For ball catching, the Chapman Strategy-keeping constant the rate of change of the tangent of the elevation angle (d(tan(alpha))/dt)-leads a catcher to the right location at

  11. The information for catching fly balls: judging and intercepting virtual balls in a CAVE

    NARCIS (Netherlands)

    Zaal, F.T.J.M.; Michaels, C.F.

    2003-01-01

    Visually guided action implies the existence of information as well as a control law relating that information to movement. For ball catching, the Chapman Strategy - keeping constant the rate of change of the tangent of the elevation angle (d(tan(α))/dt) - leads a catcher to the right location at

  12. Respiratory disease in ball pythons (Python regius) experimentally infected with ball python nidovirus.

    Science.gov (United States)

    Hoon-Hanks, Laura L; Layton, Marylee L; Ossiboff, Robert J; Parker, John S L; Dubovi, Edward J; Stenglein, Mark D

    2018-04-01

    Circumstantial evidence has linked a new group of nidoviruses with respiratory disease in pythons, lizards, and cattle. We conducted experimental infections in ball pythons (Python regius) to test the hypothesis that ball python nidovirus (BPNV) infection results in respiratory disease. Three ball pythons were inoculated orally and intratracheally with cell culture isolated BPNV and two were sham inoculated. Antemortem choanal, oroesophageal, and cloacal swabs and postmortem tissues of infected snakes were positive for viral RNA, protein, and infectious virus by qRT-PCR, immunohistochemistry, western blot and virus isolation. Clinical signs included oral mucosal reddening, abundant mucus secretions, open-mouthed breathing, and anorexia. Histologic lesions included chronic-active mucinous rhinitis, stomatitis, tracheitis, esophagitis and proliferative interstitial pneumonia. Control snakes remained negative and free of clinical signs throughout the experiment. Our findings establish a causal relationship between nidovirus infection and respiratory disease in ball pythons and shed light on disease progression and transmission. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Critical flaw size in silicon nitride ball bearings

    Science.gov (United States)

    Levesque, George Arthur

    Aircraft engine and bearing manufacturers have been aggressively pursuing advanced materials technology systems solutions to meet main shaft-bearing needs of advanced military aircraft engines. Ceramic silicon nitride hybrid bearings are being developed for such high performance applications. Though silicon nitride exhibits many favorable properties such as high compressive strength, high hardness, a third of the density of steel, low coefficient of thermal expansion, and high corrosion and temperature resistance, they also have low fracture toughness and are susceptible to failure from fatigue spalls emanating from pre-existing surface flaws that can grow under rolling contact fatigue (RCF). Rolling elements and raceways are among the most demanding components in aircraft engines due to a combination of high cyclic contact stresses, long expected component lifetimes, corrosive environment, and the high consequence of fatigue failure. The cost of these rolling elements increases exponentially with the decrease in allowable flaw size for service applications. Hence the range of 3D non-planar surface flaw geometries subject to RCF is simulated to determine the critical flaw size (CFS) or the largest allowable flaw that does not grow under service conditions. This dissertation is a numerical and experimental investigation of surface flaws in ceramic balls subjected to RCF and has resulted in the following analyses: Crack Shape Determination: the nucleation of surface flaws from ball impact that occurs during the manufacturing process is simulated. By examining the subsurface Hertzian stresses between contacting spheres, their applicability to predicting and characterizing crack size and shape is established. It is demonstrated that a wide range of cone and partial cone cracks, observed in practice, can be generated using the proposed approaches. RCF Simulation: the procedure and concerns in modeling nonplanar 3D cracks subject to RCF using FEA for stress intensity

  14. The Effect of Ankle Taping to Restrict Plantar Flexion on Ball and Foot Velocity During an Instep Kick in Soccer.

    Science.gov (United States)

    Sasadai, Junpei; Urabe, Yukio; Maeda, Noriaki; Shinohara, Hiroshi; Fujii, Eri

    2015-08-01

    Posterior ankle impingement syndrome is a common disorder in soccer players and ballet dancers. In soccer players, it is caused by the repetitive stress of ankle plantar flexion due to instep kicking. Protective ankle dorsiflexion taping is recommended with the belief that it prevents posterior ankle impingement. However, the relationship between ankle taping and ball-kicking performance remains unclear. To demonstrate the relationship between the restrictions of ankle taping and performance of an instep kick in soccer. Laboratory-based repeated-measures. University laboratory. 11 male university soccer players. The subjects' ankle plantar flexion was limited by taping. Four angles of planter flexion (0°, 15°, 30°, and without taping) were formed by gradation limitation. The subjects performed maximal instep kicks at each angle. The movements of the kicking legs and the ball were captured using 3 high-speed cameras at 200 Hz. The direct linear-transformation method was used to obtain 3-dimensional coordinates using a digitizing system. Passive ankle plantar-flexion angle, maximal plantar-flexion angle at ball impact, ball velocity, and foot velocity were measured. The data were compared among 4 conditions using repeated-measures ANOVA, and the correlations between ball velocity and foot velocity and between ball velocity and toe velocity were calculated. Ankle dorsiflexion taping could gradually limit both passive plantar flexion and plantar flexion at the impact. Furthermore, limitation of 0° and 15° reduced the ball velocity generated by instep kicks. Plantar-flexion-limiting taping at 30° has a potential to prevent posterior ankle impingement without decreasing the ball velocity generated by soccer instep kicks.

  15. Anthropometric, biomechanical, and isokinetic strength predictors of ball release speed in high-performance cricket fast bowlers.

    Science.gov (United States)

    Wormgoor, Shohn; Harden, Lois; Mckinon, Warrick

    2010-07-01

    Fast bowling is fundamental to all forms of cricket. The purpose of this study was to identify parameters that contribute to high ball release speeds in cricket fast bowlers. We assessed anthropometric dimensions, concentric and eccentric isokinetic strength of selected knee and shoulder muscle groups, and specific aspects of technique from a single delivery in 28 high-performance fast bowlers (age 22.0 +/- 3.0 years, ball release speed 34.0 +/- 1.3 m s(-1)). Six 50-Hz cameras and the Ariel Performance Analysis System software were used to analyse the fast and accurate deliveries. Using Pearson's correlation, parameters that showed significant associations with ball release speed were identified. The findings suggest that greater front leg knee extension at ball release (r=0.52), shoulder alignment in the transverse plane rotated further away from the batsman at front foot strike (r=0.47), greater ankle height during the delivery stride (r=0.44), and greater shoulder extension strength (r=0.39) contribute significantly to higher ball release speeds. Predictor variables failed to allow their incorporation into a multivariate model, which is known to exist in less accomplished bowlers, suggesting that factors that determine ball release speed found in other groups may not apply to high-performance fast bowlers.

  16. Field and Model Study to Define Baseline Conditions of Beached Oil Tar Balls along Florida’s First Coast

    Directory of Open Access Journals (Sweden)

    Peter Bacopoulos

    2014-03-01

    Full Text Available Anecdotal data are currently the best data available to describe baseline conditions of beached oil tar balls on Florida’s First Coast beaches. This study combines field methods and numerical modeling to define a data-driven knowledge base of oil tar ball baseline conditions. Outcomes from the field study include an established methodology for field data collection and laboratory testing of beached oil tar balls, spatial maps of collected samples and analysis of the data as to transport/wash-up trends. Archives of the electronic data, including GPS locations and other informational tags, and collected samples are presented, as are the physical and chemical analyses of the collected samples. The thrust of the physical and chemical analyses is to differentiate the collected samples into highly suspect oil tar balls versus false/non-oil tar ball samples. The numerical modeling involves two-dimensional hydrodynamic simulations of astronomic tides. Results from the numerical modeling include velocity residuals that show ebb-dominated residual currents exiting the inlet via an offshore, counter-rotating dual-eddy system. The tidally derived residual currents are used as one explanation for the observed transport trends. The study concludes that the port activity in the St. Johns River is not majorly contributing to the baseline conditions of oil tar ball wash-up on Florida’s First Coast beaches.

  17. Reliable Mechanochemistry: Protocols for Reproducible Outcomes of Neat and Liquid Assisted Ball-mill Grinding Experiments.

    Science.gov (United States)

    Belenguer, Ana M; Lampronti, Giulio I; Sanders, Jeremy K M

    2018-01-23

    The equilibrium outcomes of ball mill grinding can dramatically change as a function of even tiny variations in the experimental conditions such as the presence of very small amounts of added solvent. To reproducibly and accurately capture this sensitivity, the experimentalist needs to carefully consider every single factor that can affect the ball mill grinding reaction under investigation, from ensuring the grinding jars are clean and dry before use, to accurately adding the stoichiometry of the starting materials, to validating that the delivery of solvent volume is accurate, to ensuring that the interaction between the solvent and the powder is well understood and, if necessary, a specific soaking time is added to the procedure. Preliminary kinetic studies are essential to determine the necessary milling time to achieve equilibrium. Only then can exquisite phase composition curves be obtained as a function of the solvent concentration under ball mill liquid assisted grinding (LAG). By using strict and careful procedures analogous to the ones here presented, such milling equilibrium curves can be obtained for virtually all milling systems. The system we use to demonstrate these procedures is a disulfide exchange reaction starting from the equimolar mixture of two homodimers to obtain at equilibrium quantitative heterodimer. The latter is formed by ball mill grinding as two different polymorphs, Form A and Form B. The ratio R = [Form B] / ([Form A] + [Form B]) at milling equilibrium depends on the nature and concentration of the solvent in the milling jar.

  18. Two Cases of Hair Balls in Girls

    Directory of Open Access Journals (Sweden)

    Vladimir A. Shcherbak

    2016-01-01

    Full Text Available This article describes two cases of hair balls in girls between aged 2.5 and 12 years. The reason for this quite rare disease may be trichotillomania (compulsive desire to pull out own hair and trichophagia (compulsive or impulsive desire to pull out, and then to swallow own or someone's hair typical for Rapunzel syndrome. Initially, the children were enrolled in the Oncology Centre in view of suspected abdominal tumour. After detection of foreign bodies in the stomach, they were transferred to the Department of Clean Surgery. The following surgeries were performed: median laparotomy, gastrotomy on the front wall of the stomach, bezoar removal. Hair balls were dense felt-like conglomerates with a strong offensive odour. Bezoar dimensions of the younger girl were 855, the elder one — 20108 cm. Postoperative period was uneventful. The children were discharged in a satisfactory condition to be followed up by a surgeon, paediatrician, and psychiatrist in their community.

  19. James Moores Ball: Ophthalmologist, medical historian, bibliophile.

    Science.gov (United States)

    Feibel, Robert M

    2016-08-01

    James Moores Ball (1862-1929) was an ophthalmologist in St. Louis, Missouri, who excelled as a medical historian and collector of rare and historic books about the history of anatomy. During his lifetime, he was best known as the author of a comprehensive, authoritative, and popular textbook titled Modern Ophthalmology First published in 1904, there were five further editions. Ball was very interested in the history of anatomy and wrote two books on this subject, the first being a biography of Andreas Vesalius, one of the earliest in English, and the second a history of the resurrection men or grave robbers who sold corpses to professors of anatomy and surgery for teaching purposes. His legacy today is the 470 volumes of his personal library, which are now in the Archives and Rare Books department of the Becker Medical Library of the Washington University School of Medicine. These texts are one of their major collections, concentrating on the history of anatomy, beginning with a first edition of Vesalius's De Humani Corporis Fabrica and holding many important and beautiful landmark volumes of anatomical atlases. © The Author(s) 2016.

  20. Accuracy and Reliability of a New Tennis Ball Machine.

    Science.gov (United States)

    Brechbuhl, Cyril; Millet, Grégoire; Schmitt, Laurent

    2016-06-01

    The aim was to evaluate the reliability of a newly-developed ball machine named 'Hightof', on the field and to assess its accuracy. The experiment was conducted in the collaboration of the 'Hawk-Eye' technology. The accuracy and reliability of this ball machine were assessed during an incremental test, with 1 min of exercise and 30 sec of recovery, where the frequency of the balls increased from 10 to 30 balls·min(-1). The initial frequency was 10 and increased by 2 until 22, then by 1 until 30 balls·min(-1). The reference points for the impact were 8.39m from the net and 2.70m from lateral line for the right side and 2.83m for the left side. The precision of the machine was similar on the right and left sides (0.63 ± 0.39 vs 0.63 ± 0.34 m). The distances to the reference point were 0.52 ± 0.42, 0.26 ± 0.19, 0.52 ± 0.37, 0.28 ± 0.19 m for the Y-right, X-right, Y-left and X-left impacts. The precision was constant and did not increase with the intensity. (e.g ball frequency). The ball velocity was 86.3 ± 1.5 and 86.5 ± 1.3 km·h(-1) for the right and the left side, respectively. The coefficient of variation for the velocity ranged between 1 and 2% in all stages (ball velocity ranging from 10 to 30 balls·min(-1)). both the accuracy and the reliability of this new ball machine appear satisfying enough for field testing and training. Key pointsThe reliability and accuracy of a new ball machine named 'Hightof' were assessed.The impact point was reproducible and similar on the right and left sides (±0.63 m).The precision was constant and did not increase with the intensity (e.g ball frequency).The coefficient of variation of the ball velocity ranged between 1 and 2% in all stages (ball velocity ranging from 10 to 30 balls·min(-1)).

  1. Building micro-soccer-balls with evaporating colloidal fakir drops

    Science.gov (United States)

    Gelderblom, Hanneke; Marín, Álvaro G.; Susarrey-Arce, Arturo; van Housselt, Arie; Lefferts, Leon; Gardeniers, Han; Lohse, Detlef; Snoeijer, Jacco H.

    2013-11-01

    Drop evaporation can be used to self-assemble particles into three-dimensional microstructures on a scale where direct manipulation is impossible. We present a unique method to create highly-ordered colloidal microstructures in which we can control the amount of particles and their packing fraction. To this end, we evaporate colloidal dispersion drops from a special type of superhydrophobic microstructured surface, on which the drop remains in Cassie-Baxter state during the entire evaporative process. The remainders of the drop consist of a massive spherical cluster of the microspheres, with diameters ranging from a few tens up to several hundreds of microns. We present scaling arguments to show how the final particle packing fraction of these balls depends on the drop evaporation dynamics, particle size, and number of particles in the system.

  2. How Magnus Bends the Flying Ball - Experimenting and Modeling

    Science.gov (United States)

    Timková, V.; Ješková, Z.

    2017-02-01

    Students are well aware of the effect of the deflection of sports balls when they have been given a spin. A volleyball, tennis, or table tennis ball served with topspin results in an additional downward force that makes the ball difficult to catch and return. In soccer, the effect of sidespin causes the ball to curve unexpectedly sideways, resulting in a so-called banana kick that can confuse the goalkeeper. These surprising effects attract students' attention such that the motion of sports balls can be used to capture the interest of students towards the physics behind it. However, to study and analyze the motion of a real ball kicked in a playfield is not an easy task. Instead of the large-scale full-size sports ball motion, there can be designed and studied simpler experiments that can be carried out in the classroom. Moreover, digital technologies that are available at schools enable students to collect data from the experiment easily in a reasonable time. The mathematical model based on the analysis of forces acting on the ball flying in the air can be used to simulate the motion in order to understand the basic physical principles of the motion so that the best correspondence may be found.

  3. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in

  4. Physical Activity Benefits Creativity: Squeezing a Ball for Enhancing Creativity

    Science.gov (United States)

    Kim, JongHan

    2015-01-01

    Studies in embodied cognition show that physical sensations, such as touch and movement, influence cognitive processes. Two studies were conducted to test whether squeezing a soft versus a hard ball facilitates different types of creativity. Squeezing a malleable ball would increase divergent creativity by catalyzing multiple or alternative ideas,…

  5. Motion of a Ball on a Moving Surface

    Science.gov (United States)

    Cross, Rod

    2016-01-01

    A well-known physics demonstration is to pull a tablecloth rapidly from under some crockery without disturbing the crockery. An interesting question is whether the same result can be expected if the crockery is replaced by a ball, given that the ball might roll backwards on the tablecloth. Theoretical and experimental results are presented showing…

  6. Production of nano structured silicon carbide by high energy ball ...

    African Journals Online (AJOL)

    In this paper, an attempt has been made to modify the micro sized Silicon carbide powder into nano structured Silicon carbide powder using High Energy Ball Mill. Ball milling was carried out for the total duration of 50 hours. The sample was taken out after every 5 hours of milling and it was characterized for its crystallite ...

  7. Why Low Bounce Balls Exhibit High Rolling Resistance

    Science.gov (United States)

    Cross, Rod

    2015-01-01

    A simple experiment is described to measure the coefficient of rolling friction for a low bounce ball rolling on a horizontal surface. As observed previously by others, the coefficient increased with rolling speed. The energy loss due to rolling friction can be explained in terms of the measured coefficient of restitution for the ball, meaning…

  8. Between Traditions: Stephen Ball and the Critical Sociology of Education

    Science.gov (United States)

    Apple, Michael W.

    2013-01-01

    Stephen Ball's work has deservedly received a good deal of attention. In this article, I detail a number of tasks in which the critical sociologist of education--as a "public intellectual"--should engage. I then place Ball's work within these tasks and evaluate his contributions to them. In the process, I show that one of the…

  9. Launch Creativity with Ping-Pong Ball Challenge

    Science.gov (United States)

    Kornoelje, Joanne; Roman, Harry T.

    2011-01-01

    Educators at Thomas A. Edison Middle School have worked together to bring invention information and activities to life. One activity in particular, Ping-Pong Ball Invention Challenge, has proven a great success. The Ping-Pong Ball Invention Challenge was inspired by the basic rules for PBS's "Design Squad"'s "Pop Fly" activity. In this article,…

  10. Exact solutions, energy, and charge of stable Q-balls

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Marques, M.A. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil); Menezes, R. [Universidade Federal da Paraiba, Departamento de Ciencias Exatas, Rio Tinto, PB (Brazil); Universidade Federal de Campina Grande, Departamento de Fisica, Campina Grande, PB (Brazil)

    2016-05-15

    In this work we deal with nontopological solutions of the Q-ball type in two spacetime dimensions. We study models of current interest, described by a Higgs-like and other, similar potentials which unveil the presence of exact solutions. We use the analytic results to investigate how to control the energy and charge to make the Q-balls stable. (orig.)

  11. Improved hydrogen sorption kinetics in wet ball milled Mg hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Li

    2011-05-04

    In this work, wet ball milling method is used in order to improve hydrogen sorption behaviour due to its improved microstructure of solid hydrogen materials. Compared to traditional ball milling method, wet ball milling has benefits on improvement of MgH{sub 2} microstructure and further influences on its hydrogen sorption behavior. With the help of solvent tetrahydrofuran (THF), wet ball milled MgH{sub 2} powder has much smaller particle size and its specific surface area is 7 times as large as that of dry ball milled MgH{sub 2} powder. Although after ball milling the grain size is decreased a lot compared to as-received MgH{sub 2} powder, the grain size of wet ball milled MgH{sub 2} powder is larger than that of dry ball milled MgH{sub 2} powder due to the lubricant effect of solvent THF during wet ball milling. The improved particle size and specific surface area of wet ball milled MgH{sub 2} powder is found to be determining its hydrogen sorption kinetics especially at relatively low temperatures. And it also shows good cycling sorption behavior, which decides on its industrial applicability. With three different catalysts MgH{sub 2} powder shows improved hydrogen sorption behavior as well as the cyclic sorption behavior. Among them, the Nb{sub 2}O{sub 5} catalyst is found to be the most effective one in this work. Compared to the wet ball milled MgH{sub 2} powder, the particle size and specific surface area of the MgH{sub 2} powder with catalysts are similar to the previous ones, while the grain size of the MgH{sub 2} with catalysts is much finer. In this case, two reasons for hydrogen sorption improvement are suggested: one is the reduction of the grain size. The other may be as pointed out in some literatures that formation of new oxidation could enhance the hydrogen sorption kinetics, which is also the reason why its hydrogen capacity is decreased compared to without catalysts. After further ball milling, the specific surface area of wet ball milled Mg

  12. Identifying the source of tar balls deposited along the beaches of Goa in 2013 and comparing with historical data collected along the West Coast of India

    International Nuclear Information System (INIS)

    Suneel, V.; Vethamony, P.; Naik, B.G.; Krishna, M.S.; Jadhav, Lakshmikant

    2015-01-01

    Deposition of oil residues, also known as tar balls, is a seasonal phenomenon, and it occurs only in the southwest monsoon season along the west coast of India. This has become a serious environmental issue, as Goa is a global tourist destination. The present work aims at identifying the source oil of the tar balls that consistently depositing along the Goa coast using multi-marker fingerprint technique. In this context, the tar ball samples collected in May 2013 from 9 beaches of Goa coast and crude oils from different oil fields and grounded ship were subject to multi-marker analyses such as n-alkanes, pentacyclic terpanes, regular steranes, compound specific isotope analysis (CSIA) and principle component analysis (PCA). The n-alkane weathering index shows that samples have been weathered to various degrees, and the status of weathering is moderate. Since the international tanker route passes closer to the west coast of India (WCI), it is generally presumed that tanker wash is the source of the tar balls. We found that 2010/2011 tar balls are as tanker wash, but the present study demonstrates that the Bombay High (BH) oil fields can also contribute to oil contamination (tar balls) along ≈ 650 km stretch of the WCI, running from Gujarat in the north to Goa in the south. The simulated trajectories show that all the particles released in April traveled in the southeast direction, and by May, they reached the Goa coast with the influence of circulation of Indian monsoon system. - Highlights: • Multi-marker approach was effective in identifying the source of tar balls. • n-Alkane DRs show weathering effects even within the core of the tar ball. • Tar balls of the west coast of India since 2012 were derived from Bombay High crude. • Tanker-wash is not the only source of tar balls deposited on the beaches of Goa

  13. Identifying the source of tar balls deposited along the beaches of Goa in 2013 and comparing with historical data collected along the West Coast of India

    Energy Technology Data Exchange (ETDEWEB)

    Suneel, V., E-mail: vasimallas@nio.org [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India); Vethamony, P., E-mail: mony@nio.org [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India); Naik, B.G., E-mail: bgnaik@nio.org [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India); Krishna, M.S., E-mail: moturi@nio.org [CSIR-National Institute of Oceanography, Regional Centre, Visakhapatnam, 530 017 (India); Jadhav, Lakshmikant, E-mail: lakshya87.0@gmail.com [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India)

    2015-09-15

    Deposition of oil residues, also known as tar balls, is a seasonal phenomenon, and it occurs only in the southwest monsoon season along the west coast of India. This has become a serious environmental issue, as Goa is a global tourist destination. The present work aims at identifying the source oil of the tar balls that consistently depositing along the Goa coast using multi-marker fingerprint technique. In this context, the tar ball samples collected in May 2013 from 9 beaches of Goa coast and crude oils from different oil fields and grounded ship were subject to multi-marker analyses such as n-alkanes, pentacyclic terpanes, regular steranes, compound specific isotope analysis (CSIA) and principle component analysis (PCA). The n-alkane weathering index shows that samples have been weathered to various degrees, and the status of weathering is moderate. Since the international tanker route passes closer to the west coast of India (WCI), it is generally presumed that tanker wash is the source of the tar balls. We found that 2010/2011 tar balls are as tanker wash, but the present study demonstrates that the Bombay High (BH) oil fields can also contribute to oil contamination (tar balls) along ≈ 650 km stretch of the WCI, running from Gujarat in the north to Goa in the south. The simulated trajectories show that all the particles released in April traveled in the southeast direction, and by May, they reached the Goa coast with the influence of circulation of Indian monsoon system. - Highlights: • Multi-marker approach was effective in identifying the source of tar balls. • n-Alkane DRs show weathering effects even within the core of the tar ball. • Tar balls of the west coast of India since 2012 were derived from Bombay High crude. • Tanker-wash is not the only source of tar balls deposited on the beaches of Goa.

  14. Replacing by numbers - computer aided installation of ball screws in a CANDU

    International Nuclear Information System (INIS)

    Granz, R.; Georgas, J.

    1992-01-01

    Performing repair procedures on a commissioned nuclear reactor is a critical maintenance task and certainly not one suitable for on-the-job experimentation. That was our dilemma when the engineering staff developed what was thought would be a better way to replace the ball screws in the fuelling machine support bridges of a CANDU nuclear plant. The 40ft long ball screws must be installed vertically into square cavities that are less than 40ft from the ''ceiling'' of the room where they are located. Standard operating procedures for replacing the ball screw involve opening up the feeder cabinet located above to provide clearance. But this practice risks damage to delicate piping located inside the cabinet. The new concept involved walking the ball screw in by tilting it at a series of angles. Unfortunately, there was no simple way that we could determine with pencil and paper whether or not this approach would work or exactly how to do it in practice. Using the solid modelling capabilities of the Aries Concept Station mechanical computer-aided engineering system, we proved the new procedure and developed a series of illustrations offering step-by-step visual instructions to guide the maintenance crew performing the task. (Author)

  15. Attunement to haptic information helps skilled performers select implements for striking a ball in cricket.

    Science.gov (United States)

    Headrick, Jonathon; Renshaw, Ian; Pinder, Ross A; Davids, Keith

    2012-11-01

    This study examined the perceptual attunement of relatively skilled individuals to the physical properties of striking implements in the sport of cricket. We also sought to assess whether utilizing bats with different physical properties would influence performance of a specific striking action: the front foot straight drive. Eleven skilled male cricketers (mean age = 16.6 ± 0.3 years) from an elite school cricket development program consented to participate in the study. While blindfolded, participants wielded six bats exhibiting different mass and moment of inertia (MOI) characteristics and were asked to identify the three bats they preferred the most for hitting a ball to a maximum distance by performing a front foot straight drive (a common shot in cricket). Next, participants actually attempted to hit balls projected from a ball machine using each of the six bat configurations to enable kinematic analysis of front foot straight drive performance with each implement. Results revealed that, on first choice, the two bats with the smallest mass and MOI values (1 and 2) were most preferred by almost two thirds (63.7 %) of the participants. Kinematic analysis of movement patterns revealed that bat velocity, step length, and bat-ball contact position measures significantly differed between bats. Data revealed how skilled youth cricketers were attuned to the different bat characteristics and harnessed movement system degeneracy to perform this complex interceptive action.

  16. Ball Screw Actuator Including an Axial Soft Stop

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Forrest, Steven Talbert (Inventor); Abel, Steve (Inventor); Woessner, George (Inventor); Hanlon, Casey (Inventor)

    2016-01-01

    An actuator includes an actuator housing, a ball screw, and an axial soft stop assembly. The ball screw extends through the actuator housing and has a first end and a second end. The ball screw is coupled to receive a drive force and is configured, upon receipt of the drive force, to selectively move in a retract direction and an extend direction. The axial soft stop assembly is disposed within the actuator housing. The axial soft stop assembly is configured to be selectively engaged by the ball screw and, upon being engaged thereby, to translate, with compliance, a predetermined distance in the extend direction, and to prevent further movement of the ball screw upon translating the predetermined distance.

  17. Friction torque in thrust ball bearings grease lubricated

    Science.gov (United States)

    Ianuş, G.; Dumitraşcu, A. C.; Cârlescu, V.; Olaru, D. N.

    2016-08-01

    The authors investigated experimentally and theoretically the friction torque in a modified thrust ball bearing having only 3 balls operating at low axial load and lubricated with NGLI-00 and NGLI-2 greases. The experiments were made by using spin-down methodology and the results were compared with the theoretical values based on Biboulet&Houpert's rolling friction equations. Also, the results were compared with the theoretical values obtained with SKF friction model adapted for 3 balls. A very good correlation between experiments and Biboulet_&_Houpert's predicted results was obtained for the two greases. Also was observed that the theoretical values for the friction torque calculated with SKF model adapted for a thrust ball bearing having only 3 balls are smaller that the experimental values.

  18. Une balle blanche dans un roman noir

    Directory of Open Access Journals (Sweden)

    Sophie Vallas

    2012-03-01

    Full Text Available En 1982, Paul Auster fit paraître, sous le pseudonyme de Paul Benjamin, un roman noir intitulé Squeeze Play. Ce roman présente la particularité d’appartenir également au genre du baseball novel, l’intrigue se déroulant en partie dans le monde du base-ball et sa résolution intervenant grâce à une manœuvre rare et spectaculaire (un double suicide squeeze qui éclaire l’enquête sous un jour nouveau. Cet article se propose d’analyser la place du base-ball dans Squeeze Play : élément essentiel de la structuration du roman, le base-ball permet également à Auster d’étudier le mythe du héros américain déchu dans une société dont toutes les dimensions (sportive, politique, privée sont gangrenées par la corruption et la perversion. La relation particulière qu’Auster tisse entre roman noir et baseball novel est également étudiée.In 1982 Paul Auster published a roman noir entitled Squeeze Play under the pseudonym of Paul Benjamin. The novel is also a “baseball novel”: its plot essentially deals with a baseball New York team and its former, fallen star, and the final resolution of the mystery intervenes thanks to a revelation brought by a baseball game in which a rather rare and spectacular maneuver (the double suicide squeeze is used by one of the teams to turn the tables and win the game. This paper analyzes the place of baseball in Squeeze Play: it first appears as an essential element in the very structure of the plot, but it is also, for Auster, a way of questioning the myth of the hero in an American society whose main aspects (sports, politics, private life are eaten up by corruption and perversion. The links Auster establishes between roman noir and baseball novel are also dealt with.

  19. The relationships between impact location and post-impact ball speed, bat torsion, and ball direction in cricket batting.

    Science.gov (United States)

    Peploe, C; McErlain-Naylor, S A; Harland, A R; King, M A

    2018-06-01

    Three-dimensional kinematic data of bat and ball were recorded for 239 individual shots performed by twenty batsmen ranging from club to international standard. The impact location of the ball on the bat face was determined and assessed against the resultant instantaneous post-impact ball speed and measures of post-impact bat torsion and ball direction. Significant negative linear relationships were found between post-impact ball speed and the absolute distance of impact from the midline medio-laterally and sweetspot longitudinally. Significant cubic relationships were found between the distance of impact from the midline of the bat medio-laterally and both a measure of bat torsion and the post-impact ball direction. A "sweet region" on the bat face was identified whereby impacts within 2 cm of the sweetspot in the medio-lateral direction, and 4.5 cm in the longitudinal direction, caused reductions in ball speed of less than 6% from the optimal value, and deviations in ball direction of less than 10° from the intended target. This study provides a greater understanding of the margin for error afforded to batsmen, allowing researchers to assess shot success in more detail, and highlights the importance of players generating consistently central impact locations when hitting for optimal performance.

  20. Poincare ball embeddings of the optical geometry

    International Nuclear Information System (INIS)

    Abramowicz, M A; Bengtsson, I; Karas, V; Rosquist, K

    2002-01-01

    It is shown that the optical geometry of the Reissner-Nordstroem exterior metric can be embedded in a hyperbolic space all the way down to its outer horizon. The adopted embedding procedure removes a breakdown of flat-space embeddings which occurs outside the horizon, at and below the Buchdahl-Bondi limit (R/M=9/4 in the Schwarzschild case). In particular, the horizon can be captured in the optical geometry embedding diagram. Moreover, by using the compact Poincare ball representation of the hyperbolic space, the embedding diagram can cover the whole extent of radius from spatial infinity down to the horizon. Attention is drawn to the advantages of such embeddings in an appropriately curved space: this approach gives compact embeddings and it clearly distinguishes the case of an extremal black hole from a non-extremal one in terms of the topology of the embedded horizon

  1. Are perytons signatures of ball lightning?

    Energy Technology Data Exchange (ETDEWEB)

    Dodin, I. Y.; Fisch, N. J. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08543 (United States)

    2014-10-20

    The enigmatic downchirped signals, called 'perytons', that are detected by radio telescopes in the GHz frequency range may be produced by an atmospheric phenomenon known as ball lightning (BL). If BLs act as nonstationary radio frequency cavities, their characteristic emission frequencies and evolution timescales are consistent with peryton observations, and so are general patterns in which BLs are known to occur. Based on this evidence, testable predictions are made that can confirm or rule out a causal connection between perytons and BLs. In either case, how perytons are searched for in observational data may warrant reconsideration because existing procedures may be discarding events that have the same nature as known perytons.

  2. Energy cost and energy sources of ball routine in rhythmic gymnasts.

    Science.gov (United States)

    Guidetti, L; Baldari, C; Capranica, L; Persichini, C; Figura, F

    2000-04-01

    The energy cost and the different energy sources of competitive rhythmic ball-routines were assessed in nine young elite rhythmic gymnasts (13-16 years of age). The overall energy requirement of ball exercise (VO2eq) was obtained by adding the amount of VO2 during exercise above resting (VO2ex) to the VO2 up to the fast component of recovery (VO2al) and to the energy equivalent of peak blood lactate accumulation (VO2la-) of recovery. The lactate (La) curve up to 25 minutes of recovery always showed La peaks at 3 min after exercise (4.0 +/- 0.4 mmol/l) and values still above rest at 25 min (2.3 +/- 0.5 mmol/l). Although ball routines were short in duration (90 s), the metabolic power requirement was 1.1 times higher than the subject's VO2max. The energy cost (VO2eq) amounted to 81 +/- 5 ml x kg(-1). Higher fractions of VO2eq were VO2ex 49% and VO2al 42%, while the remaining 9% was due to VO2la-. The aerobic source resulted in the most utilized system due to the subjects' high VO2max (52.7 ml x kg(-1) x min(-1)) and anaerobic threshold (LT = 84.4%). The HR and the peak lactate values of ball routine were similar to the values recorded at LT step during treadmill test. Although the HR and VO2 values were significantly correlated (during pre-exercise, exercise, and fast recovery), the exercise intensity derived from HR Kanvonen method during ball routine did not correspond to the % of VO2max.

  3. Investigation of a Plasma Ball using a High Speed Camera

    Science.gov (United States)

    Laird, James; Zweben, Stewart; Raitses, Yevgeny; Zwicker, Andrew; Kaganovich, Igor

    2008-11-01

    The physics of how a plasma ball works is not clearly understood. A plasma ball is a commercial ``toy'' in which a center electrode is charged to a high voltage and lightning-like discharges fill the ball with many plasma filaments. The ball uses high voltage applied on the center electrode (˜5 kV) which is covered with glass and capacitively coupled to the plasma filaments. This voltage oscillates at a frequency of ˜26 kHz. A Nebula plasma ball from Edmund Scientific was filmed with a Phantom v7.3 camera, which can operate at speeds up to 150,000 frames per second (fps) with a limit of >=2 μsec exposure per frame. At 100,000 fps the filaments were only visible for ˜5 μsec every ˜40 μsec. When the plasma ball is first switched on, the filaments formed only after ˜800 μsec and initially had a much larger diameter with more chaotic behavior than when the ball reached its final plasma filament state at ˜30 msec. Measurements are also being made of the final filament diameter, the speed of the filament propagation, and the effect of thermal gradients on the filament density. An attempt will be made to explain these results from plasma theory and movies of these filaments will be shown. Possible theoretical models include streamer-like formation, thermal condensation instability, and dielectric barrier discharge instability.

  4. Tracking of Ball and Players in Beach Volleyball Videos

    Science.gov (United States)

    Gomez, Gabriel; Herrera López, Patricia; Link, Daniel; Eskofier, Bjoern

    2014-01-01

    This paper presents methods for the determination of players' positions and contact time points by tracking the players and the ball in beach volleyball videos. Two player tracking methods are compared, a classical particle filter and a rigid grid integral histogram tracker. Due to mutual occlusion of the players and the camera perspective, results are best for the front players, with 74,6% and 82,6% of correctly tracked frames for the particle method and the integral histogram method, respectively. Results suggest an improved robustness against player confusion between different particle sets when tracking with a rigid grid approach. Faster processing and less player confusions make this method superior to the classical particle filter. Two different ball tracking methods are used that detect ball candidates from movement difference images using a background subtraction algorithm. Ball trajectories are estimated and interpolated from parabolic flight equations. The tracking accuracy of the ball is 54,2% for the trajectory growth method and 42,1% for the Hough line detection method. Tracking results of over 90% from the literature could not be confirmed. Ball contact frames were estimated from parabolic trajectory intersection, resulting in 48,9% of correctly estimated ball contact points. PMID:25426936

  5. Do we hear size or sound? Balls dropped on plates.

    Science.gov (United States)

    Grassi, Massimo

    2005-02-01

    The aim of this study is to examine whether it is possible to recover directly the size of an object from the sound of an impact. Specifically, the study is designed to investigate whether listeners can tell the size of a ball from the sound when it is dropped on plates of different diameters (on one, two, or three plates in Experiments 1, 2, and 3, respectively). In this paradigm, most of the sound produced is from the plate rather than the ball. Listeners were told neither how many different balls or plates were used nor the materials of the balls and plates. Although listeners provided reasonable ball size estimates, their judgments were influenced by the size of the plate: Balls were judged to be larger when dropped on larger plates. Moreover, listeners were generally unable to recognize either ball and plate materials or the number of plates used in Experiments 2 and 3. Finally, various acoustic properties of the sounds are shown to be correlated with listeners' judgments.

  6. THEORETICAL ANALYSIS OF THE FORGING PROCESS FOR PRODUCING HOLLOW BALLS

    Directory of Open Access Journals (Sweden)

    Grzegorz Winiarski

    2013-06-01

    Full Text Available Hollow balls are used in the production of various machines and devices. The technology for producing hollow balls by metal forming technologies poses numerous difficulties connected with the forming of a hollow billet. The billet, which is usually in a form of a rod, is a subject to such processes as forging, helical rolling or cross-wedge rolling. The paper discusses a new method and conditions for producing a hollow ball. It was assumed that the ball would be produced in two forging operations: an initial forging operation and finishing forging operation. The presented results are based on the FEM numerical analysis conducted using DEFORM-3D. It was assumed that the billet material was made of AISI 304 stainless steel used to produce balls for ball valves. Both the shape progression during the forging process and variations in the forming force were analyzed. Based on the conducted analyses, it can be claimed that hollow balls can be produced using the proposed forging method.

  7. Tracking of ball and players in beach volleyball videos.

    Directory of Open Access Journals (Sweden)

    Gabriel Gomez

    Full Text Available This paper presents methods for the determination of players' positions and contact time points by tracking the players and the ball in beach volleyball videos. Two player tracking methods are compared, a classical particle filter and a rigid grid integral histogram tracker. Due to mutual occlusion of the players and the camera perspective, results are best for the front players, with 74,6% and 82,6% of correctly tracked frames for the particle method and the integral histogram method, respectively. Results suggest an improved robustness against player confusion between different particle sets when tracking with a rigid grid approach. Faster processing and less player confusions make this method superior to the classical particle filter. Two different ball tracking methods are used that detect ball candidates from movement difference images using a background subtraction algorithm. Ball trajectories are estimated and interpolated from parabolic flight equations. The tracking accuracy of the ball is 54,2% for the trajectory growth method and 42,1% for the Hough line detection method. Tracking results of over 90% from the literature could not be confirmed. Ball contact frames were estimated from parabolic trajectory intersection, resulting in 48,9% of correctly estimated ball contact points.

  8. Tracking of ball and players in beach volleyball videos.

    Science.gov (United States)

    Gomez, Gabriel; Herrera López, Patricia; Link, Daniel; Eskofier, Bjoern

    2014-01-01

    This paper presents methods for the determination of players' positions and contact time points by tracking the players and the ball in beach volleyball videos. Two player tracking methods are compared, a classical particle filter and a rigid grid integral histogram tracker. Due to mutual occlusion of the players and the camera perspective, results are best for the front players, with 74,6% and 82,6% of correctly tracked frames for the particle method and the integral histogram method, respectively. Results suggest an improved robustness against player confusion between different particle sets when tracking with a rigid grid approach. Faster processing and less player confusions make this method superior to the classical particle filter. Two different ball tracking methods are used that detect ball candidates from movement difference images using a background subtraction algorithm. Ball trajectories are estimated and interpolated from parabolic flight equations. The tracking accuracy of the ball is 54,2% for the trajectory growth method and 42,1% for the Hough line detection method. Tracking results of over 90% from the literature could not be confirmed. Ball contact frames were estimated from parabolic trajectory intersection, resulting in 48,9% of correctly estimated ball contact points.

  9. Water Bouncing Balls: how material stiffness affects water entry

    Science.gov (United States)

    Truscott, Tadd

    2014-03-01

    It is well known that one can skip a stone across the water surface, but less well known that a ball can also be skipped on water. Even though 17th century ship gunners were aware that cannonballs could be skipped on the water surface, they did not know that using elastic spheres rather than rigid ones could greatly improve skipping performance (yet would have made for more peaceful volleys). The water bouncing ball (Waboba®) is an elastic ball used in a game of aquatic keep away in which players pass the ball by skipping it along the water surface. The ball skips easily along the surface creating a sense that breaking the world record for number of skips could easily be achieved (51 rock skips Russell Byers 2007). We investigate the physics of skipping elastic balls to elucidate the mechanisms by which they bounce off of the water. High-speed video reveals that, upon impact with the water, the balls create a cavity and deform significantly due to the extreme elasticity; the flattened spheres resemble skipping stones. With an increased wetted surface area, a large hydrodynamic lift force is generated causing the ball to launch back into the air. Unlike stone skipping, the elasticity of the ball plays an important roll in determining the success of the skip. Through experimentation, we demonstrate that the deformation timescale during impact must be longer than the collision time in order to achieve a successful skip. Further, several material deformation modes can be excited upon free surface impact. The effect of impact velocity and angle on the two governing timescales and material wave modes are also experimentally investigated. Scaling for the deformation and collision times are derived and used to establish criteria for skipping in terms of relevant physical parameters.

  10. Ball lightning from a water beaker; Kugelblitze aus dem Wasserbecher

    Energy Technology Data Exchange (ETDEWEB)

    Buehrke, T.

    2008-07-01

    The very existence of these balls of light is the subject of controversy. People who have seen them say they can move along power lines and even go through window panes. Until recently, there was no way to get closer to ball lightning by scientific means. But now, GERD FUSSMANN from the MAX PLANCK INSTITUTE FOR PLASMA PHYSICS and BERLIN'S HUMBOLDT UNIVERSITY has managed to create blazing balls of plasma in his lab - and they may just help explain the phenomenon. (orig.)

  11. The development of cobalt-base alloy ball bearing

    International Nuclear Information System (INIS)

    Yu Xinshui; Chen Jianting; Wang Zaishu; Wang Ximei; Huang Chongming.

    1986-01-01

    The main technologies and experiences in developing a Cobalt-base alloy ball bearing are described. In the hardfacing of bearing races, a lower-hardness alloy of type St-6 is used rather than an alloy with hardness similar to that of the ball and finally the hardness of race is increased to match that of the ball by heat treatment. This improvement has certain advantages. The experience of whole developing technology indicates that strict control of the technology in the bearing-race hardfacing is the key problem in the quality assurance of bearings

  12. Ball lightning with the nonrelativistic electrons of the core

    Science.gov (United States)

    Shmatov, M. L.

    2015-08-01

    The lifetimes, volume densities of energy, electron and ion densities and other parameters of ball lightning cores with the nonrelativistic electrons are estimated. The model according to which the motion of the electrons of the ball lightning core is the superposition of the oscillatory motion and the thermal motion in the directions perpendicular to those of the oscillations is proposed. Some problems related to isolation of the ball lightning core from the atmosphere and the transfer of the atmospheric pressure on it are considered.

  13. Defects Detection on Silicon Nitride Balls by Laser Ultrasonics

    International Nuclear Information System (INIS)

    Lemaire, M.; Ouaftouh, M.; Duquennoy, M.; Jenot, F.; Ourak, M.

    2005-01-01

    In this work, we study the generation and the detection of surface waves on silicon nitride balls a few millimetres in diameter. The excitation of these waves is carried out thanks to a pulsed laser YAG and their detection is achieved with a laser interferometric probe. The whole of the device requires neither coupling nor direct contact with the balls. These waves are then used for the analysis of defects close to the surface of the balls. Several measurements are carried out on samples presenting various defects. Correlation attempts are also carried out between some ultrasonic parameters and some characteristics of defects

  14. Einleitung der Bibliografie "Fußball als Kulturgut"

    OpenAIRE

    Schiffer, Jürgen

    2006-01-01

    "Die Auffassung, dass 'Fußball auch ein Stück Kultur' sei (Beckenbauer zit. von Adelmann et al. 2003), ist alles andere als eine Selbstverständlichkeit. Lange Zeit wurde das Fußballspiel als geistloser 'Proletensport' geschmäht (Herzog 2002). Insbesondere in seinen Anfangszeiten, Ende des 19. Jahrhunderts, sah sich der in Deutschland aufkommende Fußball zahlreichen Attacken ausgesetzt. So beschrieb Karl Planck (1898, repr. 1982) den Fußball in seiner polemischen Schrift, die gegen dieses von ...

  15. Training simulator for teaching a technique to the long transmission of ball in basket-ball by a method by an arcuated hand from above with threaten

    Directory of Open Access Journals (Sweden)

    Charikova K.M.

    2012-03-01

    Full Text Available Technical devices which used in basket-ball are considered. The features of constructing of trainers and method of their application are selected in a training process. A trainer is offered for teaching a technique to the long transmission of ball in basket-ball. A trainer is a moving on a rope imitator of basket-ball ball. This construction allows to design initial position, замах for implementation of transmission and line of acceleration of ball in the final phase of motion. The method of the use of trainer is developed in an educational process.

  16. Coal-ball floras of maritime Canada and palynology of the Foord seam: geologic paleobotanical and paleoecogical implications

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, P.C.; Zodrow, E.L.; Millay, M.A.; Dolby, G.; Gillis, K.S.; Cross, A.T. [US Geological Survey, Reston, VA (United States). National Center

    1997-01-01

    Coal balls in the Canadian Carboniferous System are known from the Clifton Formation (late Bolsovian) of New Brunswick and from the Foord seam (Stellarton Formation, late Bolsovian) of the Stellarton Basin of Nova Scotia. Coal balls from these two units are dominated by arborescent lycopods but ferns, seed ferns, calamiteans, and cordaiteans also occur. Baxter`s 1960 list of coal-ball plants from New Brunswick is updated. The palynomorphs and coal-ball plants of the Foord seam of the Stellarton Basin are illustrated and their paleoecology is discussed. Five genera of arborescent lycopods were present in the Foord swamp: Diaphorodendron, Paralycopodites, Lepidophloios, Sigillaria and Lepidodendron. The first three genera are represented in coal balls; the second two are also represented as compressions in the Foord seam; and all genera are represented in the spore assemblages from the Foord seam. The palynostratigraphy indicates that Sigillaria and Diaphorodendron were almost exclusively confined to the upper bench, whereas the other three genera were probably present in the Foord mire throughout its entire history. Palynomorphic changes in the Foord mire probably reflect gradual changes in wet and dry conditions.

  17. Common Path Side Viewing Monolithic Ball Lens Probe for Optical Coherence Tomography

    OpenAIRE

    Kanwarpal, Singh; Daisuke, Yamada; Guillermo, Tearney

    2015-01-01

    Common path probes are highly desirable for optical coherence tomography as they reduce system complexity and cost by eliminating the need of dispersion compensation and polarization controlling optics. In this work, we demonstrate a monolithic ball lens based, common path, side viewing probe that is suitable for Fourier domain optical coherence tomography. The probe design parameters were simulated in Zemax modeling software and the simulated performance parameters were compared with experim...

  18. 78 FR 29702 - Ball Bearings and Parts Thereof From Germany: Final Results of Antidumping Duty Administrative...

    Science.gov (United States)

    2013-05-21

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-428-801] Ball Bearings and Parts... administrative review of the antidumping duty order on ball bearings and parts thereof from Germany. The period... ball bearings and parts thereof from Germany as the conclusion of a sunset review. See Ball Bearings...

  19. The head tracks and gaze predicts: how the world's best batters hit the ball

    NARCIS (Netherlands)

    Mann, D.L.; Spratford, W.; Abernethy, B.

    2013-01-01

    Hitters in fast ball-sports do not align their gaze with the ball throughout ball-flight; rather, they use predictive eye movement strategies that contribute towards their level of interceptive skill. Existing studies claim that (i) baseball and cricket batters cannot track the ball because it moves

  20. Effects of Varying Ball Bearing Cleaning Processes on Lubricant Life

    National Research Council Canada - National Science Library

    Didziulis, S

    1998-01-01

    The processes used to clean ball bearings and other components in precision spacecraft mechanisms have undergone significant changes to eliminate the use of ozone depleting chemicals, such as Freon TF...

  1. Pink Cricket Balls May Be Visually Challenging at Sunset

    Directory of Open Access Journals (Sweden)

    Joshua M. Adie

    2017-02-01

    Full Text Available Cricket is one of the world’s most popular sports, followed by hundreds of millions of people. It can be dangerous, played with a hard ball flying at great velocities, and accidents have occasionally been fatal. Traditionally, cricket has been played during the day, using a dark red ball. Since the late 1970s, a shorter form of one-day cricket has been played both during the day and at night under floodlights. To overcome visibility issues, one-day cricket uses a white ball, and players wear coloured clothing. There is now a desire to play a traditional form of cricket during the day and at night, using a ‘pink’ ball while players wear white clothing. Concerns regarding visibility, and player and umpire safety, have been raised in this context. Here, we report that these concerns have a sound basis.

  2. Mechanisms of dry ball milling in MOX fabrication

    International Nuclear Information System (INIS)

    Warin, D.; Bauer, M.; Seiss, M.; Lorenzelli, R.

    1997-01-01

    An important stage of MOX fuel pellets fabrication is the blending process of the nuclear powders which is carried out in the French plants in a ball milling and under dry conditions in order to avoid any criticality related difficulties. The milled powders must present a sufficiently intimate distribution of the UO 2 and PuO 2 particles which is necessary to synthesize the homogeneous (UPu)O 2 solid solution during the subsequent reactive sintering; the homogeneity of the UP 2 /PuO 2 fuels is important in relation both to uniform irradiation performance and to solubility during reprocessing. This study is related to the mechanisms which take place inside the ball mill as a function of the nature and size of the balls, the rotation speed, the milling time and the mill-to-ball charge-to-powder volume ratios. 4 refs, 3 figs

  3. On the isoperimetric rigidity of extrinsic minimal balls

    DEFF Research Database (Denmark)

    Markvorsen, Steen; Palmer, V.

    2003-01-01

    We consider an m-dimensional minimal submanifold P and a metric R-sphere in the Euclidean space R-n. If the sphere has its center p on P, then it will cut out a well defined connected component of P which contains this center point. We call this connected component an extrinsic minimal R-ball of P....... The quotient of the volume of the extrinsic ball and the volume of its boundary is not larger than the corresponding quotient obtained in the space form standard situation, where the minimal submanifold is the totally geodesic linear subspace R-m. Here we show that if the minimal submanifold has dimension...... larger than 3, if P is not too curved along the boundary of an extrinsic minimal R-ball, and if the inequality alluded to above is an equality for the extrinsic minimal ball, then the minimal submanifold is totally geodesic....

  4. An aerodynamic analysis of recent FIFA world cup balls

    Science.gov (United States)

    Kiratidis, Adrian L.; Leinweber, Derek B.

    2018-05-01

    Drag and lift coefficients of recent FIFA world cup balls are examined. We fit a novel functional form to drag coefficient curves and in the absence of empirical data provide estimates of lift coefficient behaviour via a consideration of the physics of the boundary layer. Differences in both these coefficients for recent balls, which result from surface texture modification, can significantly alter trajectories. Numerical simulations are used to quantify the effect these changes have on the flight paths of various balls. Altitude and temperature variations at recent world cup events are also discussed. We conclude by quantifying the influence these variations have on the three most recent world cup balls, the Brazuca, the Jabulani and the Teamgeist. While our paper presents findings of interest to the professional sports scientist, it remains accessible to students at the undergraduate level.

  5. Confirming a case of ball lightening production

    Energy Technology Data Exchange (ETDEWEB)

    Balyberdin, V.V.

    1975-01-01

    Model confirmation of ball lightening production was carried out on a three-cascade unit having a working voltage of 150 kV in an air atmosphere at a pressure of 730 to 750 mg Hg std. with C-shaped bending of the lightening drawoff. The electrical discharge parameters were held constant as follows: maximum current amplitude of 7 kA, oscillatory period of the quenched discharge of 6.5 x 10/sup -6/ sec, and energy used up in the unit approximately 2.2 k joules. Moving pictures are presented of the generation of one long luminous bundle displaced from a solid with a velocity up to 240 m/sec, whose luminosity was observed over a period of approximately 3 x 10/sup -3/ sec. Analysis of the experimental results showed that the appearance of plasma bundles is associated with the development of turbulent flows of a low-temperature plasma near the tip of a solid. (SJR)

  6. The Riddle of Ball Lightning: A Review

    Directory of Open Access Journals (Sweden)

    José Donoso

    2006-01-01

    Full Text Available One of the most intriguing and enduring scientific challenges is to find an explanation for ball lightning, the shining fireballs that sometimes appear near lightning strokes. Although many theoretical ideas have been proposed and much experimental work has been performed, there is not yet an accepted explanation of their amazing properties. They are surprisingly stable, lasting up to 10 s, even minutes in some rare cases. By night, their appearance can be spectacular, but their brilliance is just similar to that of a home electric bulb. Most of the time, their motion is smooth and horizontal, but it can also be erratic and chaotic; they can penetrate indoors through window panes. We review here some of the most discussed approaches, including both theoretical models to find an explanation as well as experimental efforts to reproduce them in the laboratory. We distinguish between chemical and physical models, depending on whether their stability is mainly based on their chemical composition or on purely physical phenomena involving electromagnetic fields and plasmas.

  7. Nano-porous calcium phosphate balls.

    Science.gov (United States)

    Kovach, Ildyko; Kosmella, Sabine; Prietzel, Claudia; Bagdahn, Christian; Koetz, Joachim

    2015-08-01

    By dropping a NaH2PO4·H2O precursor solution to a CaCl2 solution at 90°C under continuous stirring in presence of two biopolymers, i.e. gelatin (G) and chitosan (C), supramolecular calcium phosphate (CP) card house structures are formed. Light microscopic investigations in combination with scanning electron microscopy show that the GC-based flower-like structure is constructed from very thin CP platelets. Titration experiments indicate that H-bonding between both biopolymers is responsible for the synergistic effect in presence of both polymers. Gelatin-chitosan-water complexes play an important role with regard to supramolecular ordering. FTIR spectra in combination with powder X-ray diffraction show that after burning off all organic components (heating up >600°C) dicalcium and tricalcium phosphate crystallites are formed. From high resolution transmission electron microscopy (HR-TEM) it is obvious to conclude, that individual crystal platelets are dicalcium phosphates, which build up ball-like supramolecular structures. The results reveal that the GC guided crystal growth leads to nano-porous supramolecular structures, potentially attractive candidates for bone repair. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Fast ignition upon the implosion of a thin shell onto a precompressed deuterium-tritium ball

    Science.gov (United States)

    Gus'kov, S. Yu.; Zmitrenko, N. V.

    2012-11-01

    Fast ignition of a precompressed inertial confinement fusion (ICF) target by a hydrodynamic material flux is investigated. A model system of hydrodynamic objects consisting of a central deuterium-tritium (DT) ball and a concentric two-layer shell separated by a vacuum gap is analyzed. The outer layer of the shell is an ablator, while the inner layer consists of DT ice. The igniting hydrodynamic flux forms as a result of laser-driven acceleration and compression of the shell toward the system center. A series of one-dimensional numerical simulations of the shell implosion, the collision of the shell with the DT ball, and the generation and propagation of thermonuclear burn waves in both parts of the system are performed. Analytic models are developed that describe the implosion of a thin shell onto a central homogeneous ball of arbitrary radius and density and the initiation and propagation of a thermonuclear burn wave induced by such an implosion. Application of the solution of a model problem to analyzing the implosion of a segment of a spherical shell in a conical channel indicates the possibility of fast ignition of a spherical ICF target from a conical target driven by a laser pulse with an energy of 500-700 kJ.

  9. Data interpolation using rational cubic Ball spline with three parameters

    Science.gov (United States)

    Karim, Samsul Ariffin Abdul

    2016-11-01

    Data interpolation is an important task for scientific visualization. This research introduces new rational cubic Ball spline scheme with three parameters. The rational cubic Ball will be used for data interpolation with or without true derivative values. Error estimation show that the proposed scheme works well and is a very good interpolant to approximate the function. All graphical examples are presented by using Mathematica software.

  10. A dynamic styrofoam-ball model for simulating molecular motion

    Science.gov (United States)

    Mak, Se-yuen; Cheung, Derek

    2001-01-01

    In this paper we introduce a simple styrofoam-ball model that can be used for simulating molecular motion in all three states. As the foam balls are driven by a vibrator that is in turn driven by a signal generator, the frequency and the amplitude of vibration can be adjusted independently. Thus, the model is appropriate for simulating molecular motion in the liquid state, which is a combination of vibration and meandering motion.

  11. Attempted - to -Phase Conversion of Croconic Acid via Ball Milling

    Science.gov (United States)

    2017-05-18

    CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 16 19a. NAME OF RESPONSIBLE PERSON Steven W...stainless steel ball and vessel. ................ 6 Fig. 6 Representative heat flow traces for milled CA samples. Curves have been offset to enhance...stainless steel . The ball has a diameter of 6.35 mm and a mass of 1 g; the vessel outer diameter is 12.7 mm, and the vessel length is 27.7 mm. A series

  12. Linearly convergent stochastic heavy ball method for minimizing generalization error

    KAUST Repository

    Loizou, Nicolas

    2017-10-30

    In this work we establish the first linear convergence result for the stochastic heavy ball method. The method performs SGD steps with a fixed stepsize, amended by a heavy ball momentum term. In the analysis, we focus on minimizing the expected loss and not on finite-sum minimization, which is typically a much harder problem. While in the analysis we constrain ourselves to quadratic loss, the overall objective is not necessarily strongly convex.

  13. Brown carbon in tar balls from smoldering biomass combustion

    OpenAIRE

    R. K. Chakrabarty; H. Moosmüller; L.-W. A. Chen; K. Lewis; W. P. Arnott; C. Mazzolen; M. Dubey; C. E. Wold; W. M. Hao; S. M. Kreidenweis

    2010-01-01

    We report the direct observation of laboratory production of spherical, carbonaceous particles – "tar balls" – from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Ångström coefficients (AAC) indicate that a class of light absorbing organic carbon (OC) with wavelength dependent imaginary part of its refractive index – optically defined as "brown carbon" – is an important component of tar balls. The spectrum of the...

  14. Atmospheric tar balls: aged primary droplets from biomass burning?

    OpenAIRE

    Tóth, A.; Hoffer, A.; Nyirő-Kósa, I.; Pósfai, M.; Gelencsér, A.

    2014-01-01

    Atmospheric tar balls are particles of special morphology and composition that are fairly abundant in the plumes of biomass smoke. These particles form a specific subset of brown carbon (BrC) which has been shown to play a significant role in atmospheric shortwave absorption and, by extension, climate forcing. Here we suggest that tar balls are produced by the direct emission of liquid tar droplets followed by heat transformation upon biomass burning. For the first time in a...

  15. Effect of Hoop Stress on Ball Bearing Life Prediction

    Science.gov (United States)

    Zaretsky, Erwin V.; August, Richard; Coe, Harold H.

    1995-01-01

    A finite-element analysis (FEA) of a generic, dimensionally normalized inner race of an angular-contact ball bearing was performed under varying conditions of speed and the press (or interference) fit of the inner-race bore on a journal. The FEA results at the ball-race contact were used to derive an equation from which was obtained the radius of an equivalent cylindrical bearing race with the same or similar hoop stress. The radius of the equivalent cylinder was used to obtain a generalized closed-form approximation of the hoop stresses at the ball-inner-race contact in an angular-contact ball bearing. A life analysis was performed on both a 45- and a 120-mm-bore, angular-contact ball bearing. The predicted lives with and without hoop stress were compared with experimental endurance results obtained at 12000 and 25000 rpm with the 120-mm-bore ball bearing. A life factor equation based on hoop stress is presented.

  16. The fragmented science of ball lightning (with comment).

    Science.gov (United States)

    Turner, D J

    2002-01-15

    All the apparent anomalies in ball lightning behaviour seem to result from electrochemical processes which arise at the surface of a wet air plasma. The structure and stability of an established lightning ball are maintained by these processes and the ball operates as a thermochemical heat pump powered by the electric field of a thunderstorm. Movements result from asymmetries in the various fields which control the structure. In addition to electric, electromagnetic and gravitational fields, temperature, pressure and compositional gradients can be involved. Electrochemistry provides a framework within which specific properties can be considered using better developed or more appropriate disciplines. Several commonly made assumptions and approximations are identified which can be invalid under the specific conditions which favour ball lightning stability. If any of these limitations is ignored, seriously misleading conclusions may result. The range of power associated with lightning balls is ill defined but may vary continuously between that of globes which lack a bright centre and that of normal lightning. Our failure to contain plasmas electrochemically for more than a few seconds probably reflects our inability to balance (or even measure) the various fields which govern a ball's stability. All the fields may need to be controlled before electrochemistry can usefully be employed to contain plasmas.

  17. Atmospheric tar balls: Particles from biomass and biofuel burning

    Science.gov (United States)

    Pósfai, MiháLy; GelencséR, AndráS.; Simonics, RenáTa; Arató, Krisztina; Li, Jia; Hobbs, Peter V.; Buseck, Peter R.

    2004-03-01

    "Tar balls" are amorphous, carbonaceous spherules that occur in the tropospheric aerosol as a result of biomass and biofuel burning. They form a distinct group of particles with diameters typically between 30 and 500 nm and readily identifiable with electron microscopy. Their lack of a turbostratic microstructure distinguishes them from soot, and their morphology and composition (˜90 mol % carbon) renders them distinct from other carbonaceous particles. Tar balls are particularly abundant in slightly aged (minutes to hours old) biomass smoke, indicating that they likely form by gas-to-particle conversion within smoke plumes. The material of tar balls is initially hygroscopic; however, the particles become largely insoluble as a result of free radical polymerization of their organic molecules. Consequently, tar balls are primarily externally mixed with other particle types, and they do not appreciably increase in size during aging. When tar balls coagulate with water-bearing particles, their material may partly dissolve and no longer be recognizable as distinct particles. Tar balls may contain organic compounds that absorb sunlight. They are an important, previously unrecognized type of carbonaceous (organic) atmospheric particle.

  18. Robustness to temporal constraint explains expertise in ball-over-net sports.

    Science.gov (United States)

    Suzuki, Hiroo; Yamamoto, Yuji

    2015-06-01

    The present study investigated motor expertise in interpersonal competitive ball-over-net sports in terms of a dynamical system with temporal input. In a theoretical framework, the behavior of the system is characterized by a fractal-like structure according to switching input, which changes uniquely according to the duration of input and internal parameter of the system. We investigated periodic movements, in which the player executed a forehand or backhand stroke repeatedly, and continuous switching movements, in which the player continuously switched between two movement patterns corresponding to hitting the ball under two ball directions and with six temporal constraint conditions during a table tennis rally. In the periodic movement, we observed two limit-cycle attractors corresponding to each direction in the phase space independent of temporal constraint or skill level. Conversely, in the continuous switching movement, a transition in trajectories between the two limit-cycle attractors was observed in the phase space, and this transition was characterized by a fractal-like structure. The fractal-like structure moved closer to the random structure as temporal constraint increased independent of skill level. However, the temporal constraint condition closest to the random structure was higher for the advanced players than for the novices, indicating that robustness to the temporal constraint was higher for the advanced players than for the novices. Our results suggest that motor expertise in interpersonal competitive ball-over-net sports is more robust to temporal constraints with various inputs. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  19. ANALYSES OF BASKETBALL TECHNIQUE OF BALL THROWING AT ALOFT BOUNCE BY USING KINEMATICS METHOD

    Directory of Open Access Journals (Sweden)

    Saša Bubanj

    2009-11-01

    Full Text Available In the sports hall, professional basket-ball player demonstrated technique of thro- wing ball at aloft bounce in basketball. That element of technique was recorded by using of digital camera. Video record was mistreated and prepared for further manipulating which considered admeasurement of reference points on 13-th model system withdrawal of appropriate ”Human“ software. After that, basics kinematics variables were calcula- ted. All results were graphically presented and interpreted. Descriptive method was used as supplementary method which gave informations about impacts of single handed ve- locities of body segments on length of horizontally and vertically path which outpassed body gravity centre. Descriptive method also gave results about regularity of performed complex element of technique

  20. Performance of Small Bore 60NiTi Hybrid Ball Bearings: Preliminary Life Test Results

    Science.gov (United States)

    Dellacorte, Christopher; Howard, S. Adam

    2016-01-01

    Small bore (R8 size) hybrid ball bearings made with 60NiTi races and silicon nitride balls are under development for highly corrosive aerospace applications that are also exposed to heavy static (shock) loads. The target application is the vacuum pump used inside the wastewater recycling system on the International Space Station. To verify bearing longevity, life tests are run at 2000rpm for time periods up to 5000 hours. Accelerometers with data tracking are used to monitor operation and the bearings are disassembled and inspected at intervals to assess wear. Preliminary tests show that bearings made from 60NiTi are feasible for this aerospace and potentially other industrial applications that must endure similar operating environments.

  1. Custom Cast Ball Attachments Used on Outdated Implants to Restore a Maxillary Implant-Supported Overdenture.

    Science.gov (United States)

    Leite, Andressa Rosa Perin; Marin, Danny Omar Mendoza; Giro, Gabriela; Pero, Ana Carolina; Pinelli, Ligia Antunes Pereira; Reis, José Maurício Dos Santos Nunes

    2017-08-01

    The lack of compatible prosthetic components can be a complication during oral rehabilitation using outdated implants. The aim of the present clinical report was to describe an alternative technique for the fabrication of a maxillary implant-supported overdenture in a patient with 20-year-old dental implants using castable spherical patterns and ball attachments. The patient had been wearing a relined bar/clip overdenture in the mandible on 4 external-hexagon dental implants and a relined complete denture in the maxilla on 4 internal-hexagon implants due to abutment screw fracture inside of the implants, losing the attachment system. The remaining maxillary dental implants did not possess attachments compatible with current systems due to configuration changes by the manufacturer in the dental implant's platform and the components over time. Therefore, castable spherical patterns and cast ball attachments were used to fabricate a maxillary implant-supported overdenture. The mandible rehabilitation was performed using 4 osseointegrated dental implants with a fixed implant-supported prosthesis. The use of cast ball attachments on the maxillary dental implants avoided invasive procedures on the remaining implants. Considering the lack of available compatible prosthetic components for the osseointegrated implants, this technique was considered a viable and satisfactory treatment option.

  2. Theory of operation for the ball rheometer

    Energy Technology Data Exchange (ETDEWEB)

    Shepard, C.L.; Colson, J.B. [Pacific Northwest Lab., Richland, WA (United States); Pasamehmetoglu, K.O.; Unal, C.; Edwards, J.N.; Abbott, J. [Los Alamos National Lab., NM (United States)

    1994-12-01

    The Hanford Site contains over 100 high-volume tanks containing high-level radioactive wastes. The tank which has received the most attention is Tank 101-SY, which is a double shell tank containing a caustic mixed-waste slurry. The ball rheometer developed in this work is intended at least initially for application in this tank. Tank 101-SY is known to periodically release flammable and toxic gases during events known as rollovers. The tank waste is largely made up of two layers, a supernatant liquid layer underneath which is a thick sludge layer. The two layers are called the convective (C) and the nonconvective (NC) regions, so called because of the thermal transport properties ascribed to each. Although they have significant uncertainty, the current theology data suggest the existence of a yield stress in the highly viscous nonconvective layer. Gas generated in the waste can be held in the NC layer if the material yield strength or its viscosity is high enough. Gas cannot be held in the C layer to any appreciable extent unless it is in solution. As gas continues to be generated by chemical or other processes, the number of gas bubbles and/or their sizes increases in the NC layer. A rollover occurs when the amount of gas trapped in the nonconvective region becomes great enough to overcome forces holding it in place. These forces are believed to be dependent on the theology of the nonconvective region and perhaps the bubble surface tension. The buoyancy forces on the bubbles exceed the restraining forces arising from the yield stress and the viscosity of the NC layer. Theology is then seen to be quite important in determining the nature of gas release events in this tank.

  3. Quenching simulation of steel grinding balls

    Directory of Open Access Journals (Sweden)

    Zapata-Hernández, Oscar

    2015-09-01

    Full Text Available The phase transformations of high carbon steel during quenching and equalizing were modelled using commercial computer packages based on the finite element method and the kinetic transformation of steel. The model was used to predict the temperature and microstructural changes taking place within balls of two different sizes that are used for grinding mineral ores. A good correlation between the temperatures measured by inserted thermocouples and those predicted by the model was obtained after modifying the thermal conductivity of the steel within the temperature domain at which mixed phases are present. The phase transformations predicted were confirmed by metallographic analyses.Las transformaciones de fase en aceros de alto carbono durante su temple y un posterior periodo de estabilización fueron modelizadas por medio del uso de paquetes computacionales basados en el método del elemento finito y de la transformación cinética de los aceros. El modelo se usó para predecir los cambios de temperatura y microestructura que se presentan en bolas de dos diferentes tamaños empleadas en estaciones de molienda de minerales. Se encontró una buena correlación entre las temperaturas medidas mediante la inserción de termopares y aquellas predichas por el modelo una vez que se modificó la conductividad térmica del acero en el intervalo mixto de fases. La predicción de las transformaciones de fase se confirmó a través del análisis metalográfico.

  4. THE BEHAVIOURAL REACTION OF WEANERS TO HANGING TOYS: WOODEN BALL AND AROMATIZED WOODEN BALL – WAY TO REDUCE AGGRESSION AFTER MIXING

    Directory of Open Access Journals (Sweden)

    Jacek NOWICKI

    2008-05-01

    Full Text Available The behaviour of weaners after mixing housed in pens equipped with hanging wooden ball, aromatized with vanilla fluid hanging wooden ball and without enrichment was evaluated. It was found that both enrichments reduced aggression, however the most interesting for weaners was the aromatized wooden ball.

  5. Some new insights into the history of the Glasgow time ball and time guns

    Science.gov (United States)

    Clarke, David; Kinns, Roger

    2012-03-01

    The 1857 time ball machinery at the Glasgow Sailors' Home was supplied by Alexander McKenzie, mechanist, using a design that had much in common with the 1853 Edinburgh apparatus. It was operated using electrical connections to a mean time clock in the Home. This clock required adjustment by hand each day to compensate for its losing rate. Such manual intervention and lack of independent verification of accuracy under-mined the authority of the signal. The relative prestige of the Glasgow and Edinburgh Observatories was an important issue. There was no telegraphic link between Glasgow Observatory and the City until the end of 1863, but it had been demonstrated as early as October 1855 that a time ball could be dropped by telegraph from Edinburgh. Another Edinburgh initiative in September 1863 using time guns fired from Edinburgh caused offence in Glasgow and the trials were terminated in February 1864. Professor Grant, Director of Glasgow Observatory, argued successfully that a system of slave clocks controlled from Glasgow Observatory would be far superior to either a time ball or time guns which only provided a signal once per day. He won the debate in March 1864.

  6. Connectivity-Based Parcellation of the Cortical Mantle Using q-Ball Diffusion Imaging

    Directory of Open Access Journals (Sweden)

    Muriel Perrin

    2008-01-01

    Full Text Available This paper exploits the idea that each individual brain region has a specific connection profile to create parcellations of the cortical mantle using MR diffusion imaging. The parcellation is performed in two steps. First, the cortical mantle is split at a macroscopic level into 36 large gyri using a sulcus recognition system. Then, for each voxel of the cortex, a connection profile is computed using a probabilistic tractography framework. The tractography is performed from q-ball fields using regularized particle trajectories. Fiber ODF are inferred from the q-balls using a sharpening process focusing the weight around the q-ball local maxima. A sophisticated mask of propagation computed from a T1-weighted image perfectly aligned with the diffusion data prevents the particles from crossing the cortical folds. During propagation, the particles father child particles in order to improve the sampling of the long fascicles. For each voxel, intersection of the particle trajectories with the gyri lead to a connectivity profile made up of only 36 connection strengths. These profiles are clustered on a gyrus by gyrus basis using a K-means approach including spatial regularization. The reproducibility of the results is studied for three subjects using spatial normalization.

  7. The study on dynamic properties of monolithic ball end mills with various slenderness

    Science.gov (United States)

    Wojciechowski, Szymon; Tabaszewski, Maciej; Krolczyk, Grzegorz M.; Maruda, Radosław W.

    2017-10-01

    The reliable determination of modal mass, damping and stiffness coefficient (modal parameters) for the particular machine-toolholder-tool system is essential for the accurate estimation of vibrations, stability and thus the machined surface finish formed during the milling process. Therefore, this paper focuses on the analysis of ball end mill's dynamical properties. The tools investigated during this study are monolithic ball end mills with different slenderness values, made of coated cemented carbide. These kinds of tools are very often applied during the precise milling of curvilinear surfaces. The research program included the impulse test carried out for the investigated tools clamped in the hydraulic toolholder. The obtained modal parameters were further applied in the developed tool's instantaneous deflection model, in order to estimate the tool's working part vibrations during precise milling. The application of the proposed dynamics model involved also the determination of instantaneous cutting forces on the basis of the mechanistic approach. The research revealed that ball end mill's slenderness can be considered as an important milling dynamics and machined surface quality indicator.

  8. The study on dynamic properties of monolithic ball end mills with various slenderness

    Directory of Open Access Journals (Sweden)

    Wojciechowski Szymon

    2017-01-01

    Full Text Available The reliable determination of modal mass, damping and stiffness coefficient (modal parameters for the particular machine-toolholder-tool system is essential for the accurate estimation of vibrations, stability and thus the machined surface finish formed during the milling process. Therefore, this paper focuses on the analysis of ball end mill's dynamical properties. The tools investigated during this study are monolithic ball end mills with different slenderness values, made of coated cemented carbide. These kinds of tools are very often applied during the precise milling of curvilinear surfaces. The research program included the impulse test carried out for the investigated tools clamped in the hydraulic toolholder. The obtained modal parameters were further applied in the developed tool's instantaneous deflection model, in order to estimate the tool's working part vibrations during precise milling. The application of the proposed dynamics model involved also the determination of instantaneous cutting forces on the basis of the mechanistic approach. The research revealed that ball end mill's slenderness can be considered as an important milling dynamics and machined surface quality indicator.

  9. The effect of argon gas pressure on ice ball size and rate of formation.

    Science.gov (United States)

    Sprenkle, Preston C; Mirabile, Gabriella; Durak, Evren; Edelstein, Andrew; Gupta, Mantu; Hruby, Gregory W; Okhunov, Zhamshid; Landman, Jaime

    2010-09-01

    Contemporary cryoablation technology utilizes the Joule-Thomson effect, defined as a change in temperature that results from expansion of a nonideal gas through an orifice or other restriction. We evaluated the effect of initial gas tank pressures on freezing dynamics in a single-probe model and in a multiprobe model using contemporary cryoablation technology. Cryoablation trials were performed in a standardized system of transparent gelatin molds at 25°C. Two sets of trials were performed. The first trial evaluated temperature and ice ball size for a given tank pressure when a single needle was deployed. The second trial recorded ice ball temperatures for each probe when multiple probes were fired simultaneously. Trial 1: The rate of temperature change is directly related to the initial pressure of the gas being released, and the group with the highest starting pressures reached the lowest mean temperature and had the largest mean ice ball size (p probe ablation did not affect the rate of temperature change or final temperature compared with firing a single probe (p > 0.7). In accordance with the Joule-Thomson effect, higher initial gas pressures used for cryoablation in a transparent gel model demonstrate statistically significant lower temperatures, faster decreases in temperature, and formation of larger ice balls than lower gas pressures do. With contemporary technology, multiple simultaneous cryoprobe deployment does not compromise individual probe efficacy. The use of higher initial tank pressures will theoretically help future cryoprobes be more effective, creating a greater volume of cell necrosis and a smaller indeterminate zone.

  10. Effect of soccer shoe upper on ball behaviour in curve kicks

    Science.gov (United States)

    Ishii, Hideyuki; Sakurai, Yoshihisa; Maruyama, Takeo

    2014-08-01

    New soccer shoes have been developed by considering various concepts related to kicking, such as curving a soccer ball. However, the effects of shoes on ball behaviour remain unclear. In this study, by using a finite element simulation, we investigated the factors that affect ball behaviour immediately after impact in a curve kick. Five experienced male university soccer players performed one curve kick. We developed a finite element model of the foot and ball and evaluated the validity of the model by comparing the finite element results for the ball behaviour immediately after impact with the experimental results. The launch angle, ball velocity, and ball rotation in the finite element analysis were all in general agreement with the experimental results. Using the validated finite element model, we simulated the ball behaviour. The simulation results indicated that the larger the foot velocity immediately before impact, the larger the ball velocity and ball rotation. Furthermore, the Young's modulus of the shoe upper and the coefficient of friction between the shoe upper and the ball had little effect on the launch angle, ball velocity, and ball rotation. The results of this study suggest that the shoe upper does not significantly influence ball behaviour.

  11. Effect of Ball Weight on Speed, Accuracy, and Mechanics in Cricket Fast Bowling

    Directory of Open Access Journals (Sweden)

    Katharine L. Wickington

    2017-02-01

    Full Text Available The aims of this study were: (1 to quantify the acute effects of ball weight on ball release speed, accuracy, and mechanics in cricket fast bowling; and (2 to test whether a period of sustained training with underweight and overweight balls is effective in increasing a player’s ball release speed. Ten well-trained adult male cricket players performed maximum-effort deliveries using balls ranging in weight from 46% to 137% of the standard ball weight (156 g. A radar gun, bowling target, and 2D video analysis were used to obtain measures of ball speed, accuracy, and mechanics. The participants were assigned to either an intervention group, who trained with underweight and overweight balls, or to a control group, who trained with standard-weight balls. We found that ball speed decreased at a rate of about 1.1 m/s per 100 g increase in ball weight. Accuracy and bowling mechanics were not adversely affected by changes in ball weight. There was evidence that training with underweight and overweight balls might have produced a practically meaningful increase in bowling speed (>1.5 m/s in some players without compromising accuracy or increasing their risk of injury through inducing poor bowling mechanics. In cricket fast bowling, a wide range of ball weight might be necessary to produce an effective modified-implement training program.

  12. Lymph system

    Science.gov (United States)

    Lymphatic system ... neck, under the arms, and groin. The lymph system includes the: Tonsils Adenoids Spleen Thymus ... JE, Flynn JA, Solomon BS, Stewart RW. Lymphatic system. In: Ball JW, Dains JE, Flynn JA, Solomon ...

  13. James L. Tuck Los Alamos ball lightning pioneer

    Energy Technology Data Exchange (ETDEWEB)

    Baker, D.A.

    1999-07-01

    James Tuck was well known for starting the Project Sherwood group at Los Alamos Scientific Laboratory in 1952. This group was formed to study and develop concepts for controlled fusion energy. In his later years after retiring from Controlled Fusion Division, he continued research at Los Alamos on the topic of ball lightning. He traveled widely giving lectures on both observations of others and his own experimental efforts. He collected anecdotal observations obtained from those in his lecture audiences during his travels and from responses from newspaper articles where he asked for specific information from ball lightning observers. He finally cut off this collection of data when the number of responses became overwhelming. The author's primary publication on ball lightning was a short laboratory report. He planned on publishing a book on the subject but this was never completed before his death. Tuck focused his experimental effort on attempting to duplicate the production of plasma balls claimed to be observed in US Navy submarines when a switch was opened under overload conditions with battery power. During lunch breaks he made use of a Los Alamos N-division battery bank facility to mock up a submarine power pack and switch gear. This non-funded effort was abruptly terminated when an explosion occurred in the facility. An overview of Tuck's research and views will be given. The flavor Jim's personality as well as a ball produced with his experimental apparatus will be shown using video chips.

  14. Reliability of a New Medicine Ball Throw Power Test.

    Science.gov (United States)

    Sayers, Mark G L; Bishop, Stephen

    2017-08-01

    The purpose of this study was to examine the reliability of a new upper body medicine ball push-press (MBP-P) test. Twenty-three strength trained volunteers performed a series of supine MBP-P throws using loads representing 5% and10% of their 5RM bench press (5 repetitions at each load). Throws were performed on a force platform (2000 Hz), with medicine ball kinematic data collected using a high-speed motion capture (500 Hz). Testing was repeated after 7-10 days to quantify intertest reliability. Maximal force (F max ), impulse at F max , time to F max , and maximum rate of force development (RFD max ) were all calculated from the force platform outputs, with maximum ball velocity (Vel max ) and maximum ball acceleration (Accel max ) developed from the kinematic data. Reliability was assessed using intraclass correlation (ICC), coefficient of variation (%CV), and typical error. Medicine ball kinematic variables were more reliable (CV% = 2.6-5.3, ICC = 0.87-0.95) than the various force platform derived power variables (CV% = 7.9-26.7, ICC = 0.51-0.90). The MBP-P test produces reliable data and can be used to quantify many standard power based measures, with the key findings have implications for athletic populations requiring high velocity, light load upper body pushing power.

  15. New data on the formation of Carboniferous coal balls

    Energy Technology Data Exchange (ETDEWEB)

    Scott, A.C.; Mattey, D.P.; Howard, R. [University of London, Egham (United Kingdom). Royal Holloway and Bedford New College, Dept. of Geology

    1996-10-01

    Coal balls are formed from the precipitation of carbonate minerals, predominantly calcite, from water during or immediately post-peat formation. Previous petrological studies suggest permineralization occurred at various stages during the peatificiation process by precipitation from a mixture of marine and meteoric freshwater. The geochemical studies reported here aimed to test previous theories of coal ball formation. The coal balls studied are from Upper Carboniferous and Carboniferous/Permian coal seams in Britain, United States of America, Belgium and China. Stable carbon isotopic values of calcites range from {delta}{sup 13}C of -5 to -35 parts per thousand indicating highly variable contribution of decayed organic matter to the carbonate cement. Oxygen isotopic values of delta({sup 18}) range from -3 to -15 parts per thousand suggest both marine and meteoric freshwater sources. The range, in the British coal balls in particular, with {delta}{sup 13}C ranging from -7 to -25 parts per thousand indicates the complexity of carbonate generation. Isotopic data support at least four theories of carbonate coal ball formation. This makes their absence from post-Permian coals the more puzzling and it is suggested that the overall structure of the peat may play a role.

  16. The coefficient of restitution of pressurized balls: a mechanistic model

    Science.gov (United States)

    Georgallas, Alex; Landry, Gaëtan

    2016-01-01

    Pressurized, inflated balls used in professional sports are regulated so that their behaviour upon impact can be anticipated and allow the game to have its distinctive character. However, the dynamics governing the impacts of such balls, even on stationary hard surfaces, can be extremely complex. The energy transformations, which arise from the compression of the gas within the ball and from the shear forces associated with the deformation of the wall, are examined in this paper. We develop a simple mechanistic model of the dependence of the coefficient of restitution, e, upon both the gauge pressure, P_G, of the gas and the shear modulus, G, of the wall. The model is validated using the results from a simple series of experiments using three different sports balls. The fits to the data are extremely good for P_G > 25 kPa and consistent values are obtained for the value of G for the wall material. As far as the authors can tell, this simple, mechanistic model of the pressure dependence of the coefficient of restitution is the first in the literature. *%K Coefficient of Restitution, Dynamics, Inflated Balls, Pressure, Impact Model

  17. Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

    Directory of Open Access Journals (Sweden)

    Zhiliang Chen

    2016-07-01

    Full Text Available Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization of heavy metals in municipal solid waste incineration (MSWI fly ash. Three heavy metals (Cu, Cr, Pb loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a significant decrease in particle size, a rise in its BET-surface, and turning basic crystals therein into amorphous structures. The dissolution rate of acid buffering materials present in activated particles is enhanced, resulting in a rising pH value of the leachate, reducing the leaching out of some heavy metals.

  18. Atmospheric tar balls: aged primary droplets from biomass burning?

    Science.gov (United States)

    Tóth, A.; Hoffer, A.; Nyirő-Kósa, I.; Pósfai, M.; Gelencsér, A.

    2014-07-01

    Atmospheric tar balls are particles of special morphology and composition that are fairly abundant in the plumes of biomass smoke. These particles form a specific subset of brown carbon (BrC) which has been shown to play a significant role in atmospheric shortwave absorption and, by extension, climate forcing. Here we suggest that tar balls are produced by the direct emission of liquid tar droplets followed by heat transformation upon biomass burning. For the first time in atmospheric chemistry we generated tar-ball particles from liquid tar obtained previously by dry distillation of wood in an all-glass apparatus in the laboratory with the total exclusion of flame processes. The particles were perfectly spherical with a mean optical diameter of 300 nm, refractory, externally mixed, and homogeneous in the contrast of the transmission electron microscopy (TEM) images. They lacked any graphene-like microstructure and exhibited a mean carbon-to-oxygen ratio of 10. All of the observed characteristics of laboratory-generated particles were very similar to those reported for atmospheric tar-ball particles in the literature, strongly supporting our hypothesis regarding the formation mechanism of atmospheric tar-ball particles.

  19. Rotating and rolling rigid bodies and the "hairy ball" theorem

    Science.gov (United States)

    Bormashenko, Edward; Kazachkov, Alexander

    2017-06-01

    Rotating and rolling rigid bodies exemplify a fascinating theorem of topology, jokingly called the "hairy ball" theorem, which demands that any continuous tangent vector field on the sphere has at least one point where the field is zero. We demonstrate via a gedanken experiment how drilling through a rotating ball, thereby converting it into a torus, leads to the elimination of zero-velocity points on the ball surface. Using the same reasoning, zero-velocity points can be removed from the surface of a drilled spinning top. We discuss the location of zero-velocity points on the surfaces of rigid bodies rolling with no slip and with slip. Observations made from different reference frames identify various zero-velocity points. Illustrative experiments visualizing zero-velocity points are presented.

  20. Durability Tests of Ball Valve Prototype with Flowmeter Operation

    Science.gov (United States)

    Rogula, J.; Romanik, G.

    2018-02-01

    The results of the investigation of the prototypical ball valve are presented in this article. The innovation of the tested valve is a ball with a built-in measuring orifice. The valve has been subjected to durability tests. Leakage under three temperatures: ambient, -30°C and +100°C was analyzed. Sealing elements of the valve were tested for roughness and deviation of shape before and after the cycles of operation. Ball valve operation means cycles of open/close. It was planned to perform 1000 cycles at each temperature condition accordingly. Tests of the valve were performed under gas pressure equal to 10 MPa. The research was carried out under the Operational Program "Intelligent Development" (POIR 01.01.01-00-0013 / 15 "Development of devices for measurement of media flow on industrial trunk-lines".

  1. Acoustic monitoring of a ball sinking in vibrated granular sediments

    Science.gov (United States)

    van den Wildenberg, Siet; Léopoldès, Julien; Tourin, Arnaud; Jia, Xiaoping

    2017-06-01

    We develop an ultrasound probing to investigate the dynamics of a high density ball sinking in 3D opaque dense granular suspensions under horizontal weak vibrations. We show that the motion of the ball in these horizontally vibrated glass bead packings saturated by water is consistent with the frictional rheology. The extracted stress-strain relation evidences an evolution of flow behaviour from frictional creep to inertial regimes. Our main finding is that weak external vibration primarily affects the yield stress and controls the depth of sinking via vibration-induced sliding at the grain contact. Also, we observe that the extracted rheological parameters depend on the size of the probing ball, suggesting thus a non-local rheology.

  2. Simulating fullerene ball bearings of ultra-low friction

    International Nuclear Information System (INIS)

    Li Xiaoyan; Yang Wei

    2007-01-01

    We report the direct molecular dynamics simulations for molecular ball bearings composed of fullerene molecules (C 60 and C 20 ) and multi-walled carbon nanotubes. The comparison of friction levels indicates that fullerene ball bearings have extremely low friction (with minimal frictional forces of 5.283 x 10 -7 and 6.768 x 10 -7 nN/atom for C 60 and C 20 bearings) and energy dissipation (lowest dissipation per cycle of 0.013 and 0.016 meV/atom for C 60 and C 20 bearings). A single fullerene inside the ball bearings exhibits various motion statuses of mixed translation and rotation. The influences of the shaft's distortion on the long-ranged potential energy and normal force are discussed. The phonic dissipation mechanism leads to a non-monotonic function between the friction and the load rate for the molecular bearings

  3. A Case of Lung Lesions Induced by a soccer Ball

    Directory of Open Access Journals (Sweden)

    Masaaki Takemoto

    2013-01-01

    Full Text Available An 18-year-old youth soccer forward received a direct hit from a kicked soccer ball on the anterior right chest when the goal keeper kicked the ball from a distance of 1 meter. Immediately following the hit, the subject experienced dypnea, chest pain and had a cough, with several milliliters of hemoptysis. His symptoms subsided after 20 minutes of rest. However, he still felt mild discomfort and was taken to our department for evaluation. On examination, all vital signs were normal. A computed tomography scan of the chest was obtained, and revealed a small area of opacification in the right lung field suggesting a pulmonary contusion or traumatic lung edema. Ten days after the initial injury, he was cleared for full participation. We herein reported the first case of a lung lesion induced by a soccer ball. Conservative treatment resulted in a favorable outcome.

  4. Study on the luminous characteristics of a natural ball lightning

    Science.gov (United States)

    Wang, Hao; Yuan, Ping; Cen, Jianyong; Liu, Guorong

    2018-02-01

    According to the optical images of the whole process of a natural ball lightning recorded by two slit-less spectrographs in the Qinghai plateau of China, the simulated observation experiment on the luminous intensity of the spherical light source was carried out. The luminous intensity and the optical power of the natural ball lightning in the wavelength range of 400-690 nm were estimated based on the experimental data and the Lambert-Beer Law. The results show that the maximum luminous intensity was about 1.24 × 105 cd in the initial stage of the natural ball lightning, and the maximum luminous intensity and the maximum optical power in most time of its life were about 5.9 × 104 cd and 4.2 × 103 W, respectively.

  5. Supermassive dark-matter Q-balls in galactic centers?

    Energy Technology Data Exchange (ETDEWEB)

    Troitsky, Sergey [Institute for Nuclear Research of the Russian Academy of Sciences,60th October Anniversary Prospect 7a, Moscow 117312 (Russian Federation); Moscow Institute for Physics and Technology,Institutskii per. 9, 141700, Dolgoprudny, Moscow Region (Russian Federation)

    2016-11-11

    Though widely accepted, it is not proven that supermassive compact objects (SMCOs) residing in galactic centers are black holes. In particular, the Milky Way’s SMCO can be a giant nontopological soliton, Q-ball, made of a scalar field: this fits perfectly all observational data. Similar but tiny Q-balls produced in the early Universe may constitute, partly or fully, the dark matter. This picture explains in a natural way, why our SMCO has very low accretion rate and why the observed angular size of the corresponding radio source is much smaller than expected. Interactions between dark-matter Q-balls may explain how SMCOs were seeded in galaxies and resolve well-known problems of standard (non-interacting) dark matter.

  6. Comparison of exit time moment spectra for extrinsic metric balls

    DEFF Research Database (Denmark)

    Hurtado, Ana; Markvorsen, Steen; Palmer, Vicente

    2012-01-01

    We prove explicit upper and lower bounds for the $L^1$-moment spectra for the Brownian motion exit time from extrinsic metric balls of submanifolds $P^m$ in ambient Riemannian spaces $N^n$. We assume that $P$ and $N$ both have controlled radial curvatures (mean curvature and sectional curvature......, respectively) as viewed from a pole in $N$. The bounds for the exit moment spectra are given in terms of the corresponding spectra for geodesic metric balls in suitably warped product model spaces. The bounds are sharp in the sense that equalities are obtained in characteristic cases. As a corollary we also...... obtain new intrinsic comparison results for the exit time spectra for metric balls in the ambient manifolds $N^n$ themselves....

  7. Retention of implant-supported overdentures at different implant angulations: comparing Locator and ball attachments.

    Science.gov (United States)

    Sultana, Nazia; Bartlett, David W; Suleiman, Mahmood

    2017-11-01

    To assess the effect of implant angulation on the retention of two different attachment systems for implant-supported overdentures after a simulated fatigue period of 5.5 years. Two test set-ups were constructed. A two-implant mandibular implant-supported overdenture design was simulated using acrylic resin blocks to support implant replicas (Model 1 and Model 2). The replicas were set up in the canine regions (22-mm inter-implant distance). In Model 1, the implants were parallel (0° to the vertical axis) and in Model 2 they were divergent (20° to the vertical axis). The Locator and the ball attachment systems were tested at both set-ups. A simulated fatigue period of 5.5 years that equated to 10,000 cycles of insertion and removal of the denture was used. Retention values for each attachment system at each angulation set-up were measured at baseline, every 500 cycles until 4000 cycles and then every 1000 cycles. After simulated fatigue, the retention for both systems at both set-ups reduced. The Locator system reduced from 108.9 to 20.2 N in the parallel set-up and from 82.3 to 17.3 N in the divergent set-up. For the ball system, the retention reduced from 56.2 to 46 N when parallel and from 45.7 to 40.7 N when divergent. Both attachment systems showed a significant reduction in retention after simulated fatigue at both parallel and divergent set-ups. The change in implant angulation caused a significant reduction in retention for the ball attachment system only, although this was still higher at the end of testing than the Locator attachment system. The Locators also had a significantly faster rate of loss of retention at both set-ups. Clinically, this may indicate that the ball attachments may perform better with divergent implants. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  8. Dynamic modelling and natural characteristic analysis of cycloid ball transmission using lumped stiffness method.

    Science.gov (United States)

    Zhang, Peng; Bao, Bingbing; Wang, Meng

    2017-01-01

    The vibration of robot joint reducer is the main factor that causes vibration or motion error of robot system. To improve the dynamic precision of robot system, the cycloid ball transmission used in robot joint is selected as study object in this paper. An efficient dynamic modelling method is presented-lumped stiffness method. Based on lumped stiffness method, a translational-torsional coupling dynamics model of cycloid ball transmission system is established. Mesh stiffness variation excitation, damping of system are all intrinsically considered in the model. The dynamic equation of system is derived by means of relative displacement relationship among different components. Then, the natural frequencies and vibration modes of the derivative system are presented by solving the associated eigenvalue problem. Finally, the influence of the main structural parameters on the natural frequency of the system is analysed. The present research can provide a new idea for dynamic analysis of robot joint reducer and provide a more simplify dynamic modelling method for robot system with joint reducer.

  9. The Energy Cost of Running with the Ball in Soccer.

    Science.gov (United States)

    Piras, Alessandro; Raffi, Milena; Atmatzidis, Charalampos; Merni, Franco; Di Michele, Rocco

    2017-11-01

    Running with the ball is a soccer-specific activity frequently used by players during match play and training drills. Nevertheless, the energy cost (EC) of on-grass running with the ball has not yet been determined. The purpose of this study was therefore to assess the EC of constant-speed running with the ball, and to compare it with the EC of normal running. Eight amateur soccer players performed two 6- min runs at 10 km/h on artificial turf, respectively with and without the ball. EC was measured with indirect calorimetry and, furthermore, estimated with a method based on players' accelerations measured with a GPS receiver. The EC measured with indirect calorimetry was higher in running with the ball (4.60±0.42 J/kg/m) than in normal running (4.19±0.33 J/kg/m), with a very likely moderate difference between conditions. Instead, a likely small difference was observed between conditions for EC estimated from GPS data (4.87±0.07 vs. 4.83±0.08 J/kg/m). This study sheds light on the energy expenditure of playing soccer, providing relevant data about the EC of a typical soccer-specific activity. These findings may be a reference for coaches to precisely determine the training load in drills with the ball, such as soccer-specific circuits or small-sided games. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Consequences of impact on arm (elbow and shoulder joints) caused by ball hitting, theoretical analysis

    Science.gov (United States)

    Negrea, Adina; Busuioceanu, Ioana Iuliana

    2018-02-01

    Present paper estimates the mechanics of the impact of a ball and a hand-arm, during the sports training using a classical model for the hand-arm system, avoiding the contribution of the coefficient of restitution. The results of this investigation are focused on the equations needed to find out theimpact reactions in elbow and shoulder joints, for different anthropometric data. Also, the computing of the position of mass centers and the moments of inertia for each constitutive part of hand-arm system is made.

  11. Note: A 1-m Foucault pendulum rolling on a ball

    Science.gov (United States)

    Salva, H. R.; Benavides, R. E.; Venturino, J. A.; Cuscueta, D. J.; Ghilarducci, A. A.

    2013-10-01

    We have built a short Foucault pendulum of 1-m length. The aim of this work was to increase the sensitivity to elliptical trajectories from other longer pendula. The design was a semi-rigid pendulum that rolls over a small ball. The measurements of the movements (azimuth and elliptical trajectory) were done by an optical method. The resulting pendulum works in a medium satisfactory way due to problems of the correct choice of the mass of the bob together with the diameter of the supporting ball. It is also important to keep the rolling surface very clean.

  12. Field-ball milling induced anisotropy in magnetic particles

    Energy Technology Data Exchange (ETDEWEB)

    Poudyal, Narayan [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Altuncevahir, Baki [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Chakka, Vamsi [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Chen Kanghua [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Black, Truman D [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Liu, J Ping [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Ding, Yong [School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 (United States); Wang Zhonglin [School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332 (United States)

    2004-12-21

    Nd{sub 2}Fe{sub 14}B and Sm{sub 2}Co{sub 17} particles of submicrometre sizes have been prepared by ball milling in a magnetic field. Structural and magnetic characterization reveal that these submicrometre particles milled in a magnetic field, consisting of nanosize grains, exhibit strong magnetic anisotropy compared with the particles milled without a magnetic field. Based on in situ observations of the field-ball milling in a transparent container, the mechanism of field-induced anisotropy in the nanostructured hard magnetic particles is discussed. (rapid communication)

  13. Evidence of microscopic ball lightning in cold fusion experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, E.H. [PO Box 2013, Champaign, IL 61825 (United States)

    2006-07-01

    There is evidence of microscopic ball lightning in several methods of cold fusion and transmutation. Thus far the experiments of Matsumoto, Miley, Shoulders, Savvatimova, and Urutskoev et al. have shown evidence of these objects that range in size from sub-atomic to about 1 mm in diameter. This article presents pictures and evidence collected by these groups, summarizes the evidence found by other groups, and discusses the significance of microscopic ball lightning. The implications for atomic physics and physics in general are discussed. (author)

  14. Ball lightning as a force-free magnetic knot

    Science.gov (United States)

    Ranada; Soler; Trueba

    2000-11-01

    The stability of fireballs in a recent model of ball lightning is studied. It is shown that the balls shine while relaxing in an almost quiescent expansion, and that three effects contribute to their stability: (i) the formation in each one during a process of Taylor relaxation of a force-free magnetic field, a concept introduced in 1954 in order to explain the existence of large magnetic fields and currents in stable configurations of astrophysical plasmas; (ii) the so called Alfven conditions in magnetohydrodynamics; and (iii) the approximate conservation of the helicity integral. The force-free fields that appear are termed "knots" because their magnetic lines are closed and linked.

  15. Ball lightning dynamics and stability at moderate ion densities

    Science.gov (United States)

    Morrow, R.

    2017-10-01

    A general mechanism is presented for the dynamics and structure of ball lightning and for the maintenance of the ball lightning structure for several seconds. Results are obtained using a spherical geometry for air at atmospheric pressure, by solving the continuity equations for electrons, positive ions and negative ions coupled with Poisson’s equation. A lightning strike can generate conditions in the lightning channel with a majority of positive nitrogen ions, and a minority of negative oxygen ions and electrons. The calculations are initiated with electrons included; however, at the moderate ion densities chosen the electrons are rapidly lost to form negative ions, and after 1 µs their influence on the ion dynamics is negligible. Further development after 1 µs is followed using a simpler set of equations involving only positive ions and negative ions, but including ion diffusion. The space-charge electric field generated by the majority positive ions drives them from the centre of the distribution and drives the minority negative ions and electrons towards the centre of the distribution. In the central region the positive and negative ion distributions eventually overlap exactly and their space-charge fields cancel resulting in zero electric field, and the plasma ball formed is quite stable for a number of seconds. The formation of such plasma balls is not critically dependent on the initial diameter of the ion distributions, or the initial density of minority negative ions. The ion densities decrease relatively slowly due to mutual neutralization of positive and negative ions. The radiation from this neutralization process involving positive nitrogen ions and negative oxygen ions is not sufficient to account for the reported luminosity of ball lightning and some other source of luminosity is shown to be required; the plasma ball model used could readily incorporate other ions in order to account for the luminosity and range of colours reported for ball

  16. Spin Rate and Deflection Ratio of a Ping Pong Ball

    Directory of Open Access Journals (Sweden)

    Byung Joon Ahn

    2013-12-01

    Full Text Available To investigate the effects of a spherical object’s spin rate on the curvature of its flight, Ping Pong balls, of varying spin rates, were hit horizontally and recorded from above with a high-speed camera. It was shown that there was a proportional relationship between the ball’s spin rate and deflection ratio. Additionally, using the results of the analyzed data, a coefficient of skin friction of the Ping Pong ball was found to be approximately 0.2 under the specific conditions of this investigation.

  17. Spin Rate and Deflection Ratio of a Ping Pong Ball

    Directory of Open Access Journals (Sweden)

    Byung Joon Ahn

    2013-01-01

    Full Text Available To investigate the effects of a spherical object’s spin rate on the curvature of its flight, Ping Pong balls, of varying spin rates, were hit horizontally and recorded from above with a high-speed camera. It was shown that there was a proportional relationship between the ball’s spin rate and deflection ratio. Additionally, using the results of the analyzed data, a coefficient of skin friction of the Ping Pong ball was found to be approximately 0.2 under the specific conditions of this investigation.

  18. Ball Lens Fiber Optic Sensor based Smart Handheld Microsurgical Instrument.

    Science.gov (United States)

    Song, Cheol; Gehlbach, Peter L; Kang, Jin U

    2013-03-20

    During freehand performance of vitreoretinal microsurgery the surgeon must perform precise and stable maneuvers that achieve surgical objectives and avoid surgical risk. Here, we present an improved smart handheld microsurgical tool which is based on a ball lens fiber optic sensor that utilizes common path swept source optical coherence tomography. Improvements include incorporation of a ball lens single mode fiber optic probe that increases the working angle of the tool to greater than 45 degrees; and increases the magnitude of the distance sensing signal through water. Also presented is a cutting function with an improved ergonomic design.

  19. Image enlargement using biharmonic Said-Ball surface

    Science.gov (United States)

    Saaban, A.; Kherd, A.; Jameel, A. F.; Akhadkulov, H.; Alipiah, F. M.

    2017-09-01

    This paper discusses the use of biharmonic cubic Said-Ball surfaces in image enlargement area. Resizing an image through up sampling or down sampling is generally common for making smaller image fit a bigger screen in full screen mode or reducing a higher resolution image to a smaller resolution. However due to some limitation, this paper will focus on image enlargement based on scaling factor of two. We use biharmonic cubic Said-Ball subject to a given four boundary curves condition respectively. We implement and evaluate the performance of the proposed method based on peak signal to noise ratio (PSNR) indicator using well-known gray-scale test images.

  20. Note: A 1-m Foucault pendulum rolling on a ball.

    Science.gov (United States)

    Salva, H R; Benavides, R E; Venturino, J A; Cuscueta, D J; Ghilarducci, A A

    2013-10-01

    We have built a short Foucault pendulum of 1-m length. The aim of this work was to increase the sensitivity to elliptical trajectories from other longer pendula. The design was a semi-rigid pendulum that rolls over a small ball. The measurements of the movements (azimuth and elliptical trajectory) were done by an optical method. The resulting pendulum works in a medium satisfactory way due to problems of the correct choice of the mass of the bob together with the diameter of the supporting ball. It is also important to keep the rolling surface very clean.

  1. Synthesis of the Mg2Ni alloy prepared by mechanical alloying using a high energy ball mill

    International Nuclear Information System (INIS)

    Iturbe G, J. L.; Lopez M, B. E.; Garcia N, M. R.

    2010-01-01

    Mg 2 Ni was synthesized by a solid state reaction from the constituent elemental powder mixtures via mechanical alloying. The mixture was ball milled for 10 h at room temperature in an argon atmosphere. The high energy ball mill used here was fabricated at ININ. A hardened steel vial and three steel balls of 12.7 mm in diameter were used for milling. The ball to powder weight ratio was 10:1. A small amount of powder was removed at regular intervals to monitor the structural changes. All the steps were performed in a little lucite glove box under argon gas, this glove box was also constructed in our Institute. The structural evolution during milling was characterized by X-ray diffraction and scanning electron microscopy techniques. The hydrogen reaction was carried out in a micro-reactor under controlled conditions of pressure and temperature. The hydrogen storage properties of mechanically milled powders were evaluated by using a thermogravimetric analysis system. Although homogeneous refining and alloying take place efficiently by repeated forging, the process time can be reduced to one fiftieth of the time necessary for conventional mechanical milling and attrition. (Author)

  2. Synthesis of the Mg{sub 2}Ni alloy prepared by mechanical alloying using a high energy ball mill

    Energy Technology Data Exchange (ETDEWEB)

    Iturbe G, J. L.; Lopez M, B. E. [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Garcia N, M. R., E-mail: joseluis.iturbe@inin.gob.m [UNAM, Facultad de Estudios Superiores Zaragoza, Batalla 5 de Mayo s/n, Esq. Fuerte de Loreto, Col. Ejercito de Oriente, 09230 Mexico D. F. (Mexico)

    2010-07-01

    Mg{sub 2}Ni was synthesized by a solid state reaction from the constituent elemental powder mixtures via mechanical alloying. The mixture was ball milled for 10 h at room temperature in an argon atmosphere. The high energy ball mill used here was fabricated at ININ. A hardened steel vial and three steel balls of 12.7 mm in diameter were used for milling. The ball to powder weight ratio was 10:1. A small amount of powder was removed at regular intervals to monitor the structural changes. All the steps were performed in a little lucite glove box under argon gas, this glove box was also constructed in our Institute. The structural evolution during milling was characterized by X-ray diffraction and scanning electron microscopy techniques. The hydrogen reaction was carried out in a micro-reactor under controlled conditions of pressure and temperature. The hydrogen storage properties of mechanically milled powders were evaluated by using a thermogravimetric analysis system. Although homogeneous refining and alloying take place efficiently by repeated forging, the process time can be reduced to one fiftieth of the time necessary for conventional mechanical milling and attrition. (Author)

  3. Effect of milling time on microstructure and properties of Nano-titanium polymer by high-energy ball milling

    Science.gov (United States)

    Wang, Bo; Wei, Shicheng; Wang, Yujiang; Liang, Yi; Guo, Lei; Xue, Junfeng; Pan, Fusheng; Tang, Aitao; Chen, Xianhua; Xu, Binshi

    2018-03-01

    Nano-titanium (Nano-Ti) was prepared by high-energy ball milling from pure Ti power and grinding agents (Epoxy resin) at room temperature. The effect of milling time on structure and properties of Nano-Ti polymer were investigated systematically. The results show that high-energy ball milling is an effective way to produce Nano-Ti polymer. The dispersion stability and compatibility between Ti power and grinding agents are improved by prolonging the milling time at a certain degree, that is to say, the optimization milling time is 240 min. The particle size of Ti powder and the diffraction peaks intensity of Ti decrease obviously as the milling time increases due to the compression stress, shear friction and other mechanical forces are formed during ball milling. FT-IR result displays that the wavenumber of all the bands move to lower wavenumber after ball milling, and the epoxy ring is open. The system internal energy rises owing to the broken epoxy group and much more Nano-Ti is formed to promote the grafting reaction between Nano-Ti and epoxy resin. The results from TEM and XPS also prove that. And the grafting ration is maximum as the milling time is 240 min, the mass loss ratio is 17.53%.

  4. Activity profile of top-class female soccer refereeing in relation to the position of the ball.

    Science.gov (United States)

    Mallo, J; Veiga, S; López de Subijana, C; Navarro, E

    2010-01-01

    The aim of this study was to describe the activity profile of top-class female soccer referees during competition and to relate it to the position of the ball. Ten matches from the Fédération Internationale de Football Association (FIFA) under-20 female World Championships held in Russia in 2006 were filmed and the kinematical parameters of the female referees (n=10) and the ball were determined using a two-dimensional photogrammetric video system based on direct linear transformation (DLT) algorithms. Total distance covered during a match was 10 km, of which 1.3 km represented high-intensity activities (>13 km/h). The referees' highest mobility was achieved in the initial 15 min of the match, covering greater distance and performing more intense exercise (Preferee to the ball was 19.5+/-2.4m, with no significant differences between 15 min match periods. The results of this study show that: (1) the physical demands placed on top-class female referees are much like those experienced during male moderate-standard refereeing and (2) the referees were able to maintain the distance from the ball throughout the match. Copyright (c) 2008 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  5. Effect of panel shape of soccer ball on its flight characteristics

    Science.gov (United States)

    Hong, Sungchan; Asai, Takeshi

    2014-05-01

    Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory.

  6. Identification of sources of tar balls deposited along the Goa coast, India, using fingerprinting techniques

    Digital Repository Service at National Institute of Oceanography (India)

    Suneel, V.; Vethamony, P.; Zakaria, M.P.; Naik, B.G.; Prasad, K.V.

    Deposition of tar balls along the coast of Goa, India is a common phenomenon during the southwest monsoon. Representative tar ball samples collected from various beaches of Goa and one Bombay High (BH) crude oil sample were subjected to fingerprint...

  7. Noninvasive medical management of fungus ball uropathy in a premature infant.

    Science.gov (United States)

    Alkalay, A L; Srugo, I; Blifeld, C; Komaiko, M S; Pomerance, J J

    1991-09-01

    Unilateral renal obstruction secondary to fungus balls is described in a premature infant. Noninvasive medical management, which included amphotericin B and 5-flucytosine therapy and forced diuresis, resulted in disappearance of fungus balls and resolution of the obstruction.

  8. THE EFFECT OF GAMES AND TRAINING PROGRAMS OFFERED AT BALL SCHOOL (BALSCHULE, ON BALL-COORDINATION AMONG FIRST AND SECOND GRADE STUDENTS

    Directory of Open Access Journals (Sweden)

    Behrooz Ebrahimi

    2013-06-01

    Full Text Available The aim of this study is to investigate the effect of games and training programs offered at the Ball school (Ballschule Heidelberg, on ball-coordination among first and second grade students. For this purpose, 38 students from 13 schools covered by the Ball school (Heidelberg Balschule, were chosen as the experimental group (non-random ; in the meantime the consent of the students’ parents were also received. Forty students as well as a control group (non-random of eight normal schools were selected with parental consents. Then through using ball-coordination tests [BKT (BallKoordinationstests. Ball Coordination’s Tests], the level of the ball skills among both groups were measured in the pre-test and Post-test. Tests included kicking ball against the wall (under five conditions. The research methods were semi-experimental with experimental and control groups. Independent variables were also applied to the experimental group and the means and standard deviations were calculated through descriptive statistics. And then, a T-test for statistical analysis of data in related groups were applied. The results showed a significant effect of games and training programs offered at the school ball in the ball-coordination of subjects.

  9. A jelly model for a ball of an extremely hot plasma

    OpenAIRE

    Kornyushin, Yuri

    2007-01-01

    A simple model is applied to study a high temperature rather dense plasma ball. It is assumed that the ions and delocalized electrons are distributed uniformly throughout the ball, and extra/missing charge is found in a thin layer on the surface of a ball. It is shown in the framework of this model that regarded plasma ball can be relatively stable as a metastable state. Calculations show that electrostatic forces, repulsive forces between the ions, and atmospheric pressure can provide stabil...

  10. Multiple collisions of two steel balls in a Newton’s cradle

    Science.gov (United States)

    Cross, Rod

    2018-03-01

    Multiple collisions of two steel balls in a Newton’s cradle were filmed in order to measure the coefficient of restitution of the balls. Two different initial conditions were examined, one where the balls approached each other at about the same speed, and one where one ball was initially at rest. In theory, the fractional energy loss per collision is different in each case, but the experimental results indicated that the overall energy loss was about the same in both cases.

  11. Consumer Acceptance of Seaweed Ball (Eucheuma Cottonii) Fortified with Catfish Protein Concentrate (Pangasius Hypophthalmus)

    OpenAIRE

    Naibaho, Marianche F; ', Dewita; ', Edison

    2014-01-01

    The study was conducted to evaluate consumer acceptance of seaweed ball fortified with catfish protein concentrate . About 5 kg seaweed was taken from a fish market in Pekanbaru. Three types of seaweed balls were prepared from seaweed flour which was fortificated respectively with 5%, 10%, and 15% catfish protein concentrate. The seaweed balls were evaluated for consumer acceptance and chemical composition. The results indicate that the seaweed balls added with 15% catfish protein concentrate...

  12. Ball milling and annealing of Co-50 at% W Powders

    CSIR Research Space (South Africa)

    Bolokang, AS

    2013-04-01

    Full Text Available annealing of unmilled compacts yielded metastable phases. Upon 10 and 20 h ball milling of Co-W powder, no alloying was obtained. Although milling did not yield significant crystal changes in W and Co ground state struc- tures, its effect is evident during...

  13. Catching fly balls: a simulation study of the Chapman strategy

    NARCIS (Netherlands)

    Kistemaker, D.A.; Faber, H.; Beek, P.J.

    2009-01-01

    Chapman [Chapman, S. (1968). Catching a baseball. American Journal of Physics, 36, 868-870] showed that a catcher may be guided to the landing spot of a fly ball by zeroing out its optical acceleration. Subsequently, various studies have provided evidence for what is now known as the Chapman

  14. Ball game watching theory in the teaching site

    Science.gov (United States)

    Liu, Shugang; Li, Xiufang; Chuang, Chin-Jung

    2017-08-01

    Lecturing is a common approach in the traditional teaching site. In this paper, we bring a modern model "ball game watching theory" to explain the situation in the classroom. The reason why the audiences going to the court is to enjoy the atmosphere, and it is also the reason why student joining to the class. A successful class running is to create studious atmosphere. However, once the teacher does the demo in the class, the multimedia tool must be used to show the details, as the big display working in the court. The key moment is recorded and the details are magnified. when teaching aids are demonstrated, the multimedia tool plays an important role. The attention of students walks between the teacher and the display. In this ball game watching theory, the demonstrate experience is like the ball game, and the teacher works as an anchor. By following the demonstration proceeding, students build the knowledge by themselves. In addition, the demonstration must be designed to be interesting in order to make the class proceed fluently. The similarity between the ball game watching and the class will be discussed. Finally we suggest a modern class design which can raise learner motivation and achievement.

  15. Fuzzy controller for better tennis ball robot | Nguyen | Journal of ...

    African Journals Online (AJOL)

    This paper aims at designing a tennis ball robot as a training facility for tennis players. The robot is built with fuzzy controller which provides proper techniques for the players to gain practical experience as well as technical skills; thus, it can effectively serve the community and train athletes in the high-performance sport.

  16. Preliminary Studies on the Development of Meat Balls | Igene ...

    African Journals Online (AJOL)

    The UUFB sample was rated highest in terms of overall likeness and may economically complement some of the existing popular meat-based snacks in Nigeria. The significance of the study is discussed. @JASEM Keyterms: Meat, Meat ball, Quality, Product development. J. Appl. Sci. Environ. Manage. June, 2012, Vol.

  17. The spectacle of the ball python (Python regius)

    DEFF Research Database (Denmark)

    Da Silva, Mari-Ann Otkjær; Heegaard, Steffen; Wang, Tobias

    2014-01-01

    A detailed morphological description of the spectacle of the ball python (Python regius) is provided. The eyes of 21 snakes were examined by light microscopy and/or transmission electron microscopy. Additionally, eyes of nine live snakes were examined using optical coherence tomography (OCT) and ...

  18. Severe wear behaviour of alumina balls sliding against diamond ...

    Indian Academy of Sciences (India)

    Alumina balls worn out ( 14.2 × 10 − 1 mm 3 ) very rapidly with zero wear for diamond ceramic coatings. Since the generation of wear particle is the main problem for load-bearing prosthetic joints, it was concluded that the PCD material can potentially replace existing alumina bio-ceramic for their bettertribological properties ...

  19. Preparation of iron sulphides by high energy ball milling

    DEFF Research Database (Denmark)

    Lin, R.; Jiang, Jianzhong; Larsen, R.K.

    1998-01-01

    The reaction of a powder mixture consisting of 50 a.% Fe and 50 a.% S during high energy ball milling has been studied by x-ray diffraction and Mossbauer spectroscopy. After around 19 h of milling FeS2 and FeS havebeen formed. By further milling the FeS compound becomes dominating and only Fe...

  20. Structural and magnetic properties of ball milled copper ferrite

    DEFF Research Database (Denmark)

    Goya, G.F.; Rechenberg, H.R.; Jiang, Jianzhong

    1998-01-01

    The structural and magnetic evolution in copper ferrite (CuFe2O4) caused by high-energy ball milling are investigated by x-ray diffraction, Mössbauer spectroscopy, and magnetization measurements. Initially, the milling process reduces the average grain size of CuFe2O4 to about 6 nm and induces ca...

  1. Precession of a Spinning Ball Rolling down an Inclined Plane

    Science.gov (United States)

    Cross, Rod

    2015-01-01

    A routine problem in an introductory physics course considers a rectangular block at rest on a plane inclined at angle a to the horizontal. In order for the block not to slide down the incline, the coefficient of sliding friction, µ, must be at least tan a. The situation is similar for the case of a ball rolling down an inclined plane. In order…

  2. Rock Characteristics and Ball Mill Energy Requirements at ...

    African Journals Online (AJOL)

    Michael

    2015-06-01

    Jun 1, 2015 ... rate, power draw and ball mill performance. The rock types identified were conglomerate and quartzite and the main minerals were quartz, feldspars, iron oxides and sulphides. Mineralogical analysis classified the ores into hard, medium and soft. There were little differences in the mineral constituents of the ...

  3. Development of Stick and Ball Sports on Gateball

    Directory of Open Access Journals (Sweden)

    Indriyanti

    2017-10-01

    Full Text Available The purpose of this research is to make product design development of stick and ball sports in gateball. The approach used in this study is a method of Research and Development. The subject of this research is the Central Java on gateball club event gateball in Semarang and Yogyakarta. Experts and expert expert gateball expert in mechanical engineering. The data analysis phase the work field, and the data analysis stage include observation, observation, interviews, and documentation of the test kefektifan products, expert judgment expert expert gateball and expert mechanical engineering expert. The results of this research are stick and ball exercise for beginner players gateball gateball. The result of the validator 3 expert expert from the expert gateball and expert mechanical engineering product validation data beginning the first phase obtained a score above 73 definitions of the criteria of “good”, on the second stage of the product validation data obtained a score above the 81 criteria for “excellent”. The results of the interviews to the development of gateball players 19 stick and ball gateball can not be used to play in a match and can be used for subsequent exercises but for beginners a product development tool model stick and ball gateball “ INC. “can be used to enhance the ability of basic techniques in motion game for players, gateball.

  4. High-Energy Ball-Milling of Alloys and Compounds

    International Nuclear Information System (INIS)

    Le Caer, G.; Delcroix, P.; Begin-Colin, S.; Ziller, T.

    2002-01-01

    After outlining some characteristics of high-energy ball-milling, we discuss selected examples of phase transformation and of alloy synthesis which focus on deviations from archetypal behaviours and throw light on the milling mechanisms. Some contributions of Moessbauer spectrometry to the characterization of ground materials are described.

  5. Design optimization of deep groove ball bearings using crowding ...

    Indian Academy of Sciences (India)

    Aparna Duggirala

    2018-02-07

    Feb 7, 2018 ... Abstract. This paper presents a crowding distance particle swarm optimization technique to optimize the design parameters of deep groove ball bearings. The design optimization problem is multi-objective in nature. The considered objectives are maximizing dynamic and static load bearing capacities and ...

  6. Differential effects of thermal and chemical stressors on tissue balls ...

    African Journals Online (AJOL)

    Coral cell aggregates (tissue balls) from four species (Acropora muricata, Fungia repanda, Pavona cactus and Pocillopora damicornis) were used as an indicator to investigate the effects on the corals of thermal stress and of chemical extracts from three sponges (Adocia sp., Haliclona sp. and Lissodendoryx sp.) and one ...

  7. Eric Cantona: Fußball-Ikone der modernen Medienwelt

    Directory of Open Access Journals (Sweden)

    Martin Wassermair

    2010-03-01

    Full Text Available In Unterhaltungsindustrie und Massenmedien nimmt der Sport eine im wahrsten Sinne des Wortes bewegende Rolle ein. Er ist zugleich Wettkampf-Arena und Wunschmaschine, Werbefläche und Starproduktion. Dass die Erscheinungsformen des Sports in der modernen Medienwelt einer rasanten Dynamik und Wechselbeziehung unterliegen, ist am Beispiel des Massenphänomens Fußballs vielleicht am deutlichsten abzulesen.

  8. Brown carbon in tar balls from smoldering biomass combustion

    Science.gov (United States)

    R. K. Chakrabarty; H. Moosmuller; L.-W. A. Chen; K. Lewis; W. P. Arnott; C. Mazzoleni; M. K. Dubey; C. E. Wold; W. M. Hao; S. M. Kreidenweis

    2010-01-01

    We report the direct observation of laboratory production of spherical, carbonaceous particles - "tar balls" - from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Angstrom coefficients (AAC) indicate that a class of light absorbing organic carbon (OC) with wavelength dependent...

  9. An earthworm-like robot using origami-ball structures

    Science.gov (United States)

    Fang, Hongbin; Zhang, Yetong; Wang, K. W.

    2017-04-01

    Earthworms possess extraordinary on-ground and underground mobility, which inspired researchers to mimic their morphology characteristics and locomotion mechanisms to develop crawling robots. One of the bottlenecks that constrain the development and wide-spread application of earthworm-like robots is the process of design, fabrication and assembly of the robot frameworks. Here we present a new earthworm-like robot design and prototype by exploring and utilizing origami ball structures. The origami ball is able to antagonistically output both axial and radial deformations, similar as an earthworm's body segment. The origami folding techniques also introduce many advantages to the robot development, including precise and low cost fabrication and high customizability. Starting from a flat polymer film, we adopt laser machining technique to engrave the crease pattern and manually fold the patterned flat film into an origami ball. Coupling the ball with a servomotor-driven linkage yields a robot segment. Connecting six segments in series, we obtain an earthworm-like origami robot prototype. The prototype is tested in a tube to evaluate its locomotion performance. It shows that the robot could crawl effectively in the tube, manifesting the feasibility of the origami-based design. In addition, test results indicate that the robot's locomotion could be tailored by employing different peristalsis-wave based gaits. The robot design and prototype reported in this paper could foster a new breed of crawling robots with simply design, fabrication, and assemble processes, and improved locomotion performance.

  10. Thump, ring: the sound of a bouncing ball

    Energy Technology Data Exchange (ETDEWEB)

    Katz, J I, E-mail: katz@wuphys.wustl.ed [Department of Physics and McDonnell Center for the Space Sciences, Washington University, St Louis, MO 63130 (United States)

    2010-07-15

    A basketball bounced on a stiff surface produces a characteristic loud thump, followed by a high-pitched ringing. Describing the ball as an inextensible but flexible membrane containing compressed air, I formulate an approximate theory of the generation of these sounds and predict their amplitudes and waveforms.

  11. Visual strategies underpinning the development of visual-motor expertise when hitting a ball

    NARCIS (Netherlands)

    Sarpeshkar, Vishnu; Abernethy, B.; Mann, D.L.

    2017-01-01

    It is well known that skilled batters in fast-ball sports do not align their gaze with the ball throughout ball-flight, but instead adopt a unique sequence of eye and head movements that contribute toward their skill. However, much of what we know about visual-motor behavior in hitting is based on

  12. On phenomenon of light radiation from miniature balls immersed in water

    Energy Technology Data Exchange (ETDEWEB)

    Torchigin, V.P., E-mail: v_torchigin@mail.r [Institute of Informatics Problems, Russian Academy of Sciences, Nakhimovsky prospect 36/1, 119278, Moscow (Russian Federation); Torchigin, A.V. [Institute of Informatics Problems, Russian Academy of Sciences, Nakhimovsky prospect 36/1, 119278, Moscow (Russian Federation)

    2010-01-11

    A phenomenon of light radiation from miniature silicon balls produced at arc discharge and immersed in water is described. Video film showing shining balls in a vessel with water is presented. An explanation of this phenomenon is considered. Similarities and differences of this phenomenon with a phenomenon of ball lightning are analyzed.

  13. On phenomenon of light radiation from miniature balls immersed in water

    Science.gov (United States)

    Torchigin, V. P.; Torchigin, A. V.

    2010-01-01

    A phenomenon of light radiation from miniature silicon balls produced at arc discharge and immersed in water is described. Video film showing shining balls in a vessel with water is presented. An explanation of this phenomenon is considered. Similarities and differences of this phenomenon with a phenomenon of ball lightning are analyzed.

  14. Rolling Motion of a Ball Spinning about a Near-Vertical Axis

    Science.gov (United States)

    Cross, Rod

    2012-01-01

    A ball that is projected forward without spin on a horizontal surface will slide for a short distance before it starts rolling. Sliding friction acts to decrease the translation speed v and it acts to increase the rotation speed [omega]. When v = R[omega], where R is the ball radius, the ball will start rolling and the friction force drops almost…

  15. 78 FR 33975 - Safety Zone; Flagship Niagara Mariners Ball Fireworks, Presque Isle Bay, Erie, PA

    Science.gov (United States)

    2013-06-06

    ...-AA00 Safety Zone; Flagship Niagara Mariners Ball Fireworks, Presque Isle Bay, Erie, PA AGENCY: Coast... Presque Isle Bay during the Flagship Niagara Mariners Ball Fireworks display. This temporary safety zone... the Flagship Niagara Mariners Ball Fireworks. This zone will be effective and enforced from 9:30 p.m...

  16. 78 FR 9674 - Ball Bearings and Parts Thereof From Germany: Preliminary Results of Antidumping Duty...

    Science.gov (United States)

    2013-02-11

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-428-801] Ball Bearings and Parts... antidumping duty order on ball bearings and parts thereof from Germany. The period of review (POR) is May 1... at less than normal value. \\1\\ On September 15, 2011, the Department revoked the order on ball...

  17. 27 CFR 25.293 - Record of ballings and alcohol content.

    Science.gov (United States)

    2010-04-01

    ... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Records and Reports § 25.293 Record of ballings... the ballings and the alcohol content of beer and cereal beverage transferred for bottling and racking, between breweries in bulk conveyances, and to pilot brewing plants. Records showing ballings and alcohol...

  18. Effects of Caffeine Supplementation on Performance in Ball Games.

    Science.gov (United States)

    Chia, Jingyi Shannon; Barrett, Laura Ann; Chow, Jia Yi; Burns, Stephen Francis

    2017-12-01

    Although a large body of evidence exists documenting the ergogenic properties of caffeine, most studies have focused on endurance performance. However, findings from endurance sports cannot be generalized to performance in ball games where, apart from having a high level of endurance, successful athletic performances require a combination of physiological, technical and cognitive capabilities. The purpose of this review was to critically evaluate studies that have examined the effect of a single dose of caffeine in isolation on one or more of the following performance measures: total distance, sprint performance, agility, vertical jump performance and accuracy in ball games. Searches of three major databases resulted in 19 studies (invasion games: 13; net-barrier games: 6) that evaluated the acute effects of caffeine on human participants, provided the caffeine dose administered, and included a ball games specific task or simulated match. Improvements in sprint performance were observed in 8 of 10 studies (80%), and vertical jump in 7 of 8 studies (88%). Equivocal results were reported for distance covered, agility and accuracy. Minor side effects were reported in 4 of 19 studies reviewed. Pre-exercise caffeine ingestion between 3.0 and 6.0 mg/kg of body mass appears to be a safe ergogenic aid for athletes in ball games. However, the efficacy of caffeine varies depending on various factors, including, but not limited to, the nature of the game, physical status and caffeine habituation. More research is warranted to clarify the effects of caffeine on performance measures unique to ball games, such as agility and accuracy. It is essential that athletes, coaches and practitioners evaluate the risk-benefit ratio of caffeine ingestion strategies on an individual case-by-case basis.

  19. Implant-supported mandibular overdentures retained with ball or bar attachments: a randomized prospective 5-year study

    DEFF Research Database (Denmark)

    Gotfredsen, K; Holm, B

    2001-01-01

    Astra Tech dental implants placed in the anterior part of the mandible. The denture attachment system for the patients was chosen randomly by drawing lots. Eleven patients drew the bar attachment system and fifteen patients drew the ball attachment system. Plaque Index, Gingival Index, and probing......PURPOSE: The aim of the present study was to evaluate the periimplant conditions and the maintenance requirements for implant-supported overdentures in the mandible retained with ball or bar attachments during a 5-year period. MATERIALS AND METHODS: Twenty-six completely edentulous patients had two...... pocket depth were assessed around each implant. Periotest values were recorded, and periodically identical intraoral radiographs were obtained with a specially designed film-holding device. RESULTS: No implants were lost from baseline to the 5-year registration. The periimplant conditions were very...

  20. PID Controllers Design Applied to Positioning of Ball on the Stewart Platform

    Directory of Open Access Journals (Sweden)

    Koszewnik Andrzej

    2014-12-01

    Full Text Available The paper presents the design and practical implementation of PID controllers for a Stewart platform. The platform uses a resistance touch panel as a sensor and servo motors as actuators. The complete control system stabilizing the ball on the platform is realized with the Arduino microcontroller and the Matlab/Simulink software. Two processes required to acquire measurement signals from the touch panel in two perpendicular directions X and Y, are discussed. The first process includes the calibration of the touch panel, and the second process - the filtering of measurement signals with the low pass Butterworth filter. The obtained signals are used to design the algorithm of the ball stabilization by decoupling the global system into two local subsystems. The algorithm is implemented in a soft real time system. The parameters of both PID controllers (PIDx and PIDy are tuned by the trial-error method and implemented in the microcontroller. Finally, the complete control system is tested at the laboratory stand.

  1. Historiografia del “Ball de Torrent”: De la moixiganga barroca al quadre de balls populars valencians (1692-1929

    Directory of Open Access Journals (Sweden)

    Raül Sanchis Francés

    2013-06-01

    Full Text Available Resum: El Ball de Torrent és una moixiganga dramàtica popular escenificada a la ciutat de València i altres indrets del País Valencià des de finals del segle XVII fins a principis del segle XX. Estava organitzada per agrupacions gremials, juntes d’hospitals o clavaris de festes i protagonitzada per personatges agrupats en comparses que representaven una paròdia sobre les relacions entre les estructures de poder i les classes populars. Tot i la variabilitat segons el moment històric, es conforma com una mescla de quadres amb danses, música i jocs teatrals. El ball interacciona de diverses formes amb algunes festes valencianes i és, probablement, una de les mostres de teatre de carrer més nostrades i menys estudiades de la València Moderna. En aquest article es realitza una revisió bibliogràfica crítica i una primera anàlisi historiogràfica.Paraules clau: Ball de Torrent, Dansa i música tradicional, Teatre, Moixiganga, Festa valencianaAbstract: Ball de Torrent (Dance of Torrent is a popular dramatic masquerade staged in Valencia since the late seventeenth century to the early twentieth. It was organized by guilds, hospital managements or festival organizers. The actors were grouped in associations representing a parody on the relationships between power structures and popular classes. Despite the variability depending on the historical period, it consisted of a mixture of episodes or scenes with dance, music and theatre games. Any Festivals in Valencia are connected with the Ball de Torrent. It’s probably one of the most interesting samples of street theatre and studied under of the Modern Valencia. This paper analyses historical sources to review and critique bibliography.Keywords: Dance of Torrent, Traditional Dance and Music, Theatre, Masquerade, Feasts of Valencia

  2. Ball-milled sulfur-doped graphene materials contain metallic impurities originating from ball-milling apparatus: their influence on the catalytic properties.

    Science.gov (United States)

    Chua, Chun Kiang; Sofer, Zdeněk; Khezri, Bahareh; Webster, Richard D; Pumera, Martin

    2016-07-21

    Graphene materials have found applications in a wide range of devices over the past decade. In order to meet the demand for graphene materials, various synthesis methods are constantly being improved or invented. Ball-milling of graphite to obtain graphene materials is one of the many versatile methods to easily obtain bulk quantities. In this work, we show that the graphene materials produced by ball-milling are spontaneously contaminated with metallic impurities originating from the grinding bowls and balls. Ball-milled sulfur-doped graphene materials obtained from two types of ball-milling apparatus, specifically made up of stainless steel and zirconium dioxide, were investigated. Zirconium dioxide-based ball-milled sulfur-doped graphene materials contain a drastically lower amount of metallic impurities than stainless steel-based ball-milled sulfur-doped graphene materials. The presence of metallic impurities is demonstrated by their catalytic effects toward the electrochemical catalysis of hydrazine and cumene hydroperoxide. The general impression toward ball-milling of graphite as a versatile method for the bulk production of 'metal-free' graphene materials without the need for post-processing and the selection of ball-milling tools should be cautioned. These findings would have wide-reaching implications for graphene research.

  3. Acoustic evaluation of concrete delaminations using ball-chain impact excitation.

    Science.gov (United States)

    Sun, Hongbin; Zhu, Jinying; Ham, Suyun

    2017-05-01

    This letter presents an automated acoustic sensing device for rapid detection of delamination in concrete. The device consists of ball-chains for continual impact excitation and multi-channel microphones for acoustic sensing. A ball-chain is formed by multiple metal balls connected by flexible ropes and is dragged on concrete surface to excite vibration of delaminations. Compared to the conventional chain drag test, the ball-chain generates acoustic signals with higher signal-to-noise ratio (S/N) because the balls give isolated but continual impacts on concrete surface during dragging. The proposed method was validated on a concrete specimen with artificial delaminations.

  4. [Extracorporeal ventriculoatrial shunt with the use of one-way ball valve].

    Science.gov (United States)

    Kubo, Shigeki; Takimoto, Hiroshi; Hosoi, Kazuki; Toyota, Shingo; Takakura, Shuji; Hayashi, Yasuhiro; Ueno, Masato; Morisako, Toshitaka; Karasawa, Jun; Ninaga, Hideo; Yoshimine, Toshiki

    2002-04-01

    We developed a simple system of an "extracorporeal" ventriculoatrial (VA) shunt using a one-way ball valve (Acty valve II, Kaneka Medix) to release the patient from postoperative constraint during the ventricular drainage. The system is constructed in such a way that the ventricular drainage tube is connected to the central venous catheter via a one-way valve. The CSF is regulated by using the valve and is diverted into the systemic circulation as in the conventional ventriculoatrial shunt. After 2 or 3 weeks of CSF diversion through the extracorporeal VA shunt, a ventriculoperitoneal shunt is placed if hydrocephalus is apparent by temporary occlusion of the system. We applied this system to 4 patients with hydrocephalus, and we found it useful and free from adverse effects. The patient was freed from physical constraint involved in conventional ventricular drainage and an effective program of early rehabilitation was able to be started.

  5. Bar versus ball attachments for implant-supported overdentures in complete edentulism: A systematic review.

    Science.gov (United States)

    Anas El-Wegoud, Marwah; Fayyad, Ahmed; Kaddah, Amal; Nabhan, Ashraf

    2017-10-25

    Implant-supported overdenture is one of the most predictable treatment options used in complete edentulism. However, differences have been reported between bar and ball attachments used to retain overdentures in terms of patient satisfaction and prosthesis retention. The purpose of this study is to compare the effectiveness of bar and ball attachments for conventionally loaded implant-supported overdentures in completely edentulous patients to improve patient satisfaction and prosthesis retention. We conducted the review according to the Cochrane methods and following MECIR standards. We searched Cochrane Oral Health Group Trial register, Cochrane Central Register of Controlled Trials, MEDLINE, and the WHO ICTRP (March 31, 2017). Two review authors assessed trials for inclusion and risk of bias, extracted data, and checked for accuracy. We have expressed results as risk ratio or mean differences, together with their 95% confidence intervals. We included 10 trials (465 participants). After 5 y, one trial reported higher patient satisfaction when bar attachment was used (MD 1.30, 95% CI 0.20-2.40), and reported no difference between both systems in prosthesis retention (MD -0.90, 95% CI -1.90 to 0.10). Two trials reported no implant failures after 1 and 5 y in both attachments. Downgrading of evidence was based on the unclear risk of bias of included studies and the wide CI crossing the line of no effect. There is insufficient evidence to support bar or ball attachment to be used with implant-supported overdentures in completely edentulous patients to improve patient satisfaction and prosthesis retention (PROSPERO 2014:CRD42014014594). © 2017 Wiley Periodicals, Inc.

  6. Ball Lightning With Spiking and Cold Emission in the Maser-Caviton Interaction

    Science.gov (United States)

    Handel, P. H.; Carlson, G. A.; Leitner, J.

    2007-05-01

    The nonlinear system of maser and cold plasma caviton can sustain spiking oscillations around the stationary state. This is shown here in the linearized limit of small oscillations. The role of ionization and cold emission effects is considered, and the case of large spiking amplitudes is discussed qualitatively on this basis. This calculation allows us to predict the frequency of the often observed humming of ball lightning. Furthermore, four basic experiments are suggested, that should be performed in order to verify and further develop the present Maser-Soliton theory of ball lightning: comparative atmospheric absorption spectroscopy in thunderstorm conditions, electric field pulse experiment, wind tunnel experiment and laboratory ball lightning generation experiment. The latter experiment suggested is based on a 10-20KW Klystron amplifier with negative feedback, trying to simulate the behavior of the atmospheric maser. The klystron is connected through a directional coupler to a tuned resonator that serves as discharge chamber. From there, a wave guide completes the loop. An optical feedback strengthens the natural tendency of the klystron to spike almost instantaneously when the load decreases. The discharge sought is a glow at atmospheric pressure, at much lower temperature than the lowest temperature arch discharge ever obtained so far at normal pressure. At these low temperatures there are no electrons that could sustain the discharge. However, right when the discharge is dying, a powerful klystron spike is automatically caused by the sudden decrease of the load. This extracts electrons through cold (Fowler) emission, and rekindles the discharge. However, like in the case of the atmospheric maser, the presence of the large spike automatically stops the klystron power. The optical feedback is responsible in part for the fast reaction. Then the spiking cycle repeats itself. Our Maser-Soliton BL theory allows for the first time not only to understand the

  7. Brood ball-mediated transmission of microbiome members in the dung beetle, Onthophagus taurus (Coleoptera: Scarabaeidae.

    Directory of Open Access Journals (Sweden)

    Anne M Estes

    Full Text Available Insects feeding on plant sap, blood, and other nutritionally incomplete diets are typically associated with mutualistic bacteria that supplement missing nutrients. Herbivorous mammal dung contains more than 86% cellulose and lacks amino acids essential for insect development and reproduction. Yet one of the most ecologically necessary and evolutionarily successful groups of beetles, the dung beetles (Scarabaeinae feeds primarily, or exclusively, on dung. These associations suggest that dung beetles may benefit from mutualistic bacteria that provide nutrients missing from dung. The nesting behaviors of the female parent and the feeding behaviors of the larvae suggest that a microbiome could be vertically transmitted from the parental female to her offspring through the brood ball. Using sterile rearing and a combination of molecular and culture-based techniques, we examine transmission of the microbiome in the bull-headed dung beetle, Onthophagus taurus. Beetles were reared on autoclaved dung and the microbiome was characterized across development. A ~1425 bp region of the 16S rRNA identified Pseudomonadaceae, Enterobacteriaceae, and Comamonadaceae as the most common bacterial families across all life stages and populations, including cultured isolates from the 3(rd instar digestive system. Finer level phylotyping analyses based on lepA and gyrB amplicons of cultured isolates placed the isolates closest to Enterobacter cloacae, Providencia stuartii, Pusillimonas sp., Pedobacter heparinus, and Lysinibacillus sphaericus. Scanning electron micrographs of brood balls constructed from sterile dung reveals secretions and microbes only in the chamber the female prepares for the egg. The use of autoclaved dung for rearing, the presence of microbes in the brood ball and offspring, and identical 16S rRNA sequences in both parent and offspring suggests that the O. taurus female parent transmits specific microbiome members to her offspring through the brood

  8. Application of Sayong Ball Clay Membrane Filtration for Ni (II Removal from Industrial Wastewater

    Directory of Open Access Journals (Sweden)

    S.F. Mohd Noor

    2017-11-01

    Full Text Available Wastewater containing heavy metals, such as nickel ions (Ni2+, discharged from industry to water streams poses a serious threat because even at low concentrations, it does not naturally degrade and is toxic to human and aquatic life. This article reviews a novel technique for wastewater treatment using a Sayong ball clay (SBC membrane to remove nickel from industrial wastewater. SBC powder was achieved through milling using a planetary ball mill (milling time; 10, 20 and 30 h, further labelled as SBC 10, SBC 20 and SBC 30, with a ball-to-powder of ratio 7:1 and rotation speed of 300 rpm. The physical characteristics of the apparent porosities, bulk density and shrinkage were investigated. XRD was used to study the phase, while FESEM was used to analyse the microstructure of the fired membrane. The FESEM microstructure indicates a decreased particle size (SB30. Filtration was conducted using a dead-end filtration system. The fabricated SBC 10, 20 and 30 membranes showed significant removal of nickel from industrial wastewater—88.87%, 82.96% and 85.13%, respectively. This study revealed that the SBC membrane is a promising membrane to remove nickel from industrial wastewater. The results also indicate the possibility of highlighting the introduced technique as a new technique for the treatment of industrial wastewater. As a new trend for waste management, pollution prevention could be applied in Malaysia as one of the advanced biotechnologies to solve various environmental problems. Keywords: environmental management, wastewater treatment, waste processing, heavy metals

  9. Implant-retained prostheses: ball vs. conus attachments - A randomized controlled clinical trial.

    Science.gov (United States)

    Cepa, Sandy; Koller, Beatrice; Spies, Benedikt Christopher; Stampf, Susanne; Kohal, Ralf-Joachim

    2017-02-01

    To evaluate implant survival, peri-implant tissue conditions, prosthodontic maintenance requirements and patient satisfaction of two differently retained implant-supported mandibular overdentures (IOD) after the 3 years of observation. Twenty-five patients with edentulous mandibles received two implants each. Twelve patients were randomly selected to receive ball attachments, whereas 13 patients received prefabricated coni. Implant survival, peri-implant parameters (modified Plaque Index, Bleeding on Probing, modified Gingival Index, probing depth and marginal bone loss) and patient satisfaction were assessed. Additionally, prosthodontic maintenance was monitored. Clinical and radiographic follow-ups were performed 1, 2 and 3 years after prosthetic delivery. The Kaplan-Meier method was used to calculate complication rates. After a mean observation period of 29.6 months, an implant survival rate of 100% could be observed. There were no significant differences in the peri-implant parameters. During the observation period, six patients with conus attachment refused to further participate in follow-ups due to dissatisfaction with their treatment and had to be regarded as dropouts. Based on the Kaplan-Meier method, inacceptable retention was calculated for 80% and 75% of the patients in the ball and the conus groups, respectively. Patient satisfaction was 64% for the ball- and 100% for the conus-retained IODs, the latter only respecting five of initially 13 patients. The evaluated treatment method revealed high implant survival rates, but the prosthetic reconstruction required intensive maintenance. Therefore, a trend toward the reduced patient satisfaction was observed, and the promoted economy of the evaluated attachment systems should be questioned. For the conical attachment, the recommendation of the manufacturer is to use four interforaminal implants to support a removable prostheses. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. The Privilege of Ranking: Google Plays Ball.

    Science.gov (United States)

    Wiggins, Richard

    2003-01-01

    Discussion of ranking systems used in various settings, including college football and academic admissions, focuses on the Google search engine. Explains the PageRank mathematical formula that scores Web pages by connecting the number of links; limitations, including authenticity and accuracy of ranked Web pages; relevancy; adjusting algorithms;…

  11. Evaluation of material degradation of 1Cr-1Mo-0.25V steel using ball Indentation method

    International Nuclear Information System (INIS)

    Seok, Chang Sung; Koo, Jae Mean; Kim, Jeong Pyo

    2004-01-01

    The BI (Ball Indentation) method has the potential to assess the mechanical properties and to replace conventional fracture tests. In this study, the effect of aging on mechanical behavior of 1Cr-1Mo-0.25V steels procured by isothermal aging heat-treatment at four different aging times in the range of 0∼1820 hours at 630 .deg. C, were investigated using BI system

  12. Effect of soya milk on nutritive, antioxidative, reological and textural properties of chocolate produced in a ball mill

    OpenAIRE

    Zarić, Danica B.; Pajin, Biljana S.; Rakin, Marica B.; Šereš, Zita I.; Dokić, Ljubica P.; Tomić, Jelena M.

    2011-01-01

    Chocolate is a complex rheological system in which non-fat cocoa particles and sugar particles are enveloped by crystal matrix of cocoa butter. Physical properties of chocolate depend on ingredient composition, method of production and properly performed pre-crystallization phase. In this work, chocolate was produced in an unconventional way, i.e. in a ball mill applying variable refining time (30, 60 and 90 min) and pre-crystallization temperature in chocolate masses (26, 28 and 30⁰C)....

  13. Attempts to create ball lightning with triggered lightning

    Science.gov (United States)

    Hill, Jonathan D.; Uman, Martin A.; Stapleton, Michael; Jordan, Douglas M.; Chebaro, Alexander M.; Biagi, Christopher J.

    2010-08-01

    We describe attempts to create ball lightning by directing lightning, triggered from natural thunderclouds using the rocket-and-wire technique, through a variety of materials. Some of the observed phenomena have features in common with natural ball lightning or with laboratory attempts to create it: flame-like luminosity for up to 0.5 s above salt water; constant-luminosity silicon fragments falling for about 1 s under the influence of gravity; a 0.7 m region of stationary luminosity whose bottom was 0.3 m above a stainless steel surface to which arcing had occurred; and a glow for about 0.5 s above pine tree sections.

  14. Coefficient of restitution of sports balls: A normal drop test

    Science.gov (United States)

    Haron, Adli; Ismail, K. A.

    2012-09-01

    Dynamic behaviour of bodies during impact is investigated through impact experiment, the simplest being a normal drop test. Normally, a drop test impact experiment involves measurement of kinematic data; this includes measurement of incident and rebound velocity in order to calculate a coefficient of restitution (COR). A high speed video camera is employed for measuring the kinematic data where speed is calculated from displacement of the bodies. Alternatively, sensors can be employed to measure speeds, especially for a normal impact where there is no spin of the bodies. This paper compares experimental coefficients of restitution (COR) for various sports balls, namely golf, table tennis, hockey and cricket. The energy loss in term of measured COR and effects of target plate are discussed in relation to the material and construction of these sports balls.

  15. Synthesis of Randomly Substituted Anionic Cyclodextrins in Ball Milling.

    Science.gov (United States)

    Jicsinszky, László; Caporaso, Marina; Calcio Gaudino, Emanuela; Giovannoli, Cristina; Cravotto, Giancarlo

    2017-03-19

    A number of influencing factors mean that the random substitution of cyclodextrins (CD) in solution is difficult to reproduce. Reaction assembly in mechanochemistry reduces the number of these factors. However, lack of water can improve the reaction outcomes by minimizing the reagent's hydrolysis. High-energy ball milling is an efficient, green and simple method for one-step reactions and usually reduces degradation and byproduct formation. Anionic CD derivatives have successfully been synthesized in the solid state, using a planetary ball mill. Comparison with solution reactions, the solvent-free conditions strongly reduced the reagent hydrolysis and resulted in products of higher degree of substitution (DS) with more homogeneous DS distribution. The synthesis of anionic CD derivatives can be effectively performed under mechanochemical activation without significant changes to the substitution pattern but the DS distributions were considerably different from the products of solution syntheses.

  16. Synthesis of Randomly Substituted Anionic Cyclodextrins in Ball Milling

    Directory of Open Access Journals (Sweden)

    László Jicsinszky

    2017-03-01

    Full Text Available A number of influencing factors mean that the random substitution of cyclodextrins (CD in solution is difficult to reproduce. Reaction assembly in mechanochemistry reduces the number of these factors. However, lack of water can improve the reaction outcomes by minimizing the reagent’s hydrolysis. High-energy ball milling is an efficient, green and simple method for one-step reactions and usually reduces degradation and byproduct formation. Anionic CD derivatives have successfully been synthesized in the solid state, using a planetary ball mill. Comparison with solution reactions, the solvent-free conditions strongly reduced the reagent hydrolysis and resulted in products of higher degree of substitution (DS with more homogeneous DS distribution. The synthesis of anionic CD derivatives can be effectively performed under mechanochemical activation without significant changes to the substitution pattern but the DS distributions were considerably different from the products of solution syntheses.

  17. Magnet balls stuck to the frenulum of the lip.

    Science.gov (United States)

    Kondamudi, Noah P; Ayush Gupta; Kaur, Ranbir

    2014-03-01

    Accidents associated with magnets as foreign bodies pose a serious threat to the health of children and adolescents. Prompt management and removal of the magnet is important to avoid life-threatening complications. Our aim was to highlight an unusual health hazard associated with magnets in children. We report on a unique case of an adolescent girl who presented with two magnet balls stuck to the frenulum of her upper lip, resulting in intense pain and discomfort. The magnets were removed painlessly by induced magnetism through metallic mosquito forceps. As children experiment with toys and products containing detachable magnetic balls, more cases will likely present to emergency departments. Increased awareness and preventive measures should be undertaken to reduce the morbidity and mortality associated with magnets. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Sir Robert Ball: Victorian Astronomer and Lecturer par excellence

    Science.gov (United States)

    Jones, R. I. G.

    2005-12-01

    Between 1875 and 1910 Sir Robert Stawell Ball gave an estimated 2,500 lectures in towns and cities all over the British Isles and abroad. This paper traces his lecturing career from its beginnings in Ireland to the triumphs of the Royal Institution, and on lecture tours in the United States of America. After a period in mathematics and mechanics, he became a populariser of science, especially astronomy, and found fame and fortune among the working classes and the aristocracy. What motivated him to tireless travels is uncertain, but it might have been that it was rewarding, financially and to his reputation. Whatever his motives, contemporary accounts are clear that BallÕs lectures were extremely popular and well-received.

  19. Coefficient of restitution of sports balls: A normal drop test

    International Nuclear Information System (INIS)

    Haron, Adli; Ismail, K A

    2012-01-01

    Dynamic behaviour of bodies during impact is investigated through impact experiment, the simplest being a normal drop test. Normally, a drop test impact experiment involves measurement of kinematic data; this includes measurement of incident and rebound velocity in order to calculate a coefficient of restitution (COR). A high speed video camera is employed for measuring the kinematic data where speed is calculated from displacement of the bodies. Alternatively, sensors can be employed to measure speeds, especially for a normal impact where there is no spin of the bodies. This paper compares experimental coefficients of restitution (COR) for various sports balls, namely golf, table tennis, hockey and cricket. The energy loss in term of measured COR and effects of target plate are discussed in relation to the material and construction of these sports balls.

  20. Characterizations of Sobolev spaces via averages on balls

    Czech Academy of Sciences Publication Activity Database

    Dai, F.; Gogatishvili, Amiran; Yang, D.; Yuan, W.

    2015-01-01

    Roč. 128, November (2015), s. 86-99 ISSN 0362-546X R&D Projects: GA ČR GA13-14743S Institutional support: RVO:67985840 Keywords : Sobolev space * average on ball * difference * Euclidean space * space of homogeneous type Subject RIV: BA - General Math ematics Impact factor: 1.125, year: 2015 http://www.sciencedirect.com/science/article/pii/S0362546X15002618

  1. Analysis of Conditions favorable for Ball Lightning Creation

    OpenAIRE

    Boerner, H.

    2016-01-01

    This report uses a few well documented cases of Ball Lightning (or BL for short) observations to demonstrate a correlation between BL and positive lightning, especially strong positive lightning. This allows to draw conclusions and predictions about future BL observations and the pro- duction of these objects in the laboratory. Contrary to many current BL theories, these objects can be created without direct contact to a lightning channel. Very high electric fields appear to be essential for ...

  2. Observation of the Optical and Spectral Characteristics of Ball Lightning

    Science.gov (United States)

    Cen, Jianyong; Yuan, Ping; Xue, Simin

    2014-01-01

    Ball lightning (BL) has been observed with two slitless spectrographs at a distance of 0.9 km. The BL is generated by a cloud-to-ground lightning strike. It moves horizontally during the luminous duration. The evolution of size, color, and light intensity is reported in detail. The spectral analysis indicates that the radiation from soil elements is present for the entire lifetime of the BL.

  3. Unexpected Expectations The Curiosities of a Mathematical Crystal Ball

    CERN Document Server

    Wapner, Leonard M

    2012-01-01

    Unexpected Expectations: The Curiosities of a Mathematical Crystal Ball explores how paradoxical challenges involving mathematical expectation often necessitate a reexamination of basic premises. The author takes you through mathematical paradoxes associated with seemingly straightforward applications of mathematical expectation and shows how these unexpected contradictions may push you to reconsider the legitimacy of the applications. The book requires only an understanding of basic algebraic operations and includes supplemental mathematical background in chapter appendices. After a history o

  4. Tracking of Ball and Players in Beach Volleyball Videos

    OpenAIRE

    Gomez, Gabriel; Herrera López, Patricia; Link, Daniel; Eskofier, Bjoern

    2014-01-01

    This paper presents methods for the determination of players' positions and contact time points by tracking the players and the ball in beach volleyball videos. Two player tracking methods are compared, a classical particle filter and a rigid grid integral histogram tracker. Due to mutual occlusion of the players and the camera perspective, results are best for the front players, with 74,6% and 82,6% of correctly tracked frames for the particle method and the integral histogram method, respec...

  5. Condition monitoring of thrust ball bearings using continuous AE

    Czech Academy of Sciences Publication Activity Database

    Chlada, Milan; Nohal, L.; Převorovský, Zdeněk

    2016-01-01

    Roč. 26, č. 2 (2016), A14-A14 ISSN 1213-3825. [Europen Conference on Acoustic Emission Testing /32./. 07.09.2016-09.09.2016, Praha] Grant - others:NETME Centre Plus - národní program udržitelnosti(CZ) LO1202 Institutional support: RVO:61388998 Keywords : continuous acoustic emission * rolling contact fatigue * thrust ball bearing * histogram of counting periods * wavelet analysis Subject RIV: BI - Acoustics

  6. Efficacy of birth ball exercises on labour pain management.

    Science.gov (United States)

    Leung, R W C; Li, J F P; Leung, M K M; Fung, B K Y; Fung, L C W; Tai, S M; Sing, C; Leung, W C

    2013-10-01

    To evaluate the efficacy of a birth ball exercise programme conducted by physiotherapists on pain relief, psychological care, and facilitation of the labour process at a labour ward in a regional hospital. Case series with before-after comparisons. Kwong Wah Hospital, Hong Kong. Chinese women admitted to the labour ward for spontaneous vaginal delivery between April and August 2012 were recruited. Physiotherapists taught birth ball exercises in groups or individually for 30 minutes. Labour pain intensity, back pain intensity, frequency of labour pain, stress and anxiety levels, and subjective pressure level over the lower abdomen were captured before and after birth ball exercises. Most of the parameters were measured using self-reported visual analogue scales. After the exercise session, physiotherapists measured the women's satisfaction level. Midwives recorded pethidine usage. A total of 203 pregnant women participated in this programme; 181 were in the latent phase group, whereas 22 were categorised into the no-labour-pain group. In both groups, there were statistically and clinically significant differences in back pain level, stress and anxiety levels, as well as pressure level over the lower abdomen before and after the exercise (Plabour pain and frequency of labour pain were demonstrated. Mean satisfaction scores were high, with visual analogue scale scores higher than 8.2 in both groups. Pethidine usage showed a further decreasing trend (6.4%) compared with the past 2 years. Birth ball exercise could be an alternative means of relieving back pain and labour pain in the labour ward, and could decrease pethidine consumption in labouring women.

  7. Spatiotemporal characteristics of muscle patterns for ball catching

    Directory of Open Access Journals (Sweden)

    Mattia eD'Andola

    2013-08-01

    Full Text Available What sources of information and what control strategies the CNS uses to perform movements that require accurate sensorimotor coordination, such as catching a flying ball, is still debated. Here we analyzed the EMG waveforms recorded from 16 shoulder and elbow muscles in six subjects during catching of balls projected frontally from a distance of 6 m and arriving at two different heights and with three different flight times (550, 650, 750 ms. We found that a large fraction of the variation in the muscle patterns was captured by two time-varying muscle synergies, coordinated recruitment of groups of muscles with specific activation waveforms, modulated in amplitude and shifted in time according to the ball’s arrival height and flight duration. One synergy was recruited with a short and fixed delay from launch time. Remarkably, a second synergy was recruited at a fixed time before impact, suggesting that it is timed according to an accurate time-to-contact estimation. These results suggest that the control of interceptive movements relies on a combination of reactive and predictive processes through the intermittent recruitment of time-varying muscle synergies. Knowledge of the dynamic effect of gravity and drag on the ball may be then implicitly incorporated in a direct mapping of visual information into a small number of synergy recruitment parameters.

  8. Experimental Study on Voided Reinforced Concrete Beams with Polythene Balls

    Science.gov (United States)

    Sivaneshan, P.; Harishankar, S.

    2017-07-01

    The primary component in any structure is concrete, that exist in buildings and bridges. In present situation, a serious problems faced by construction industry is exhaustive use of raw materials. Recent times, various methods are being adopted to limit the use of concrete. In structural elements like beams, polythene balls can be induced to reduce the usage of concrete. A simply supported reinforced concrete beam has two zones, one above neutral axis and other below neutral axis. The region below neutral axis is in tension and above neutral axis is in compression. As concrete is weak in tension, steel reinforcements are provided in tension zone. The concrete below the neutral axis acts as a stress transfer medium between the compression zone and tension zone. The concrete above the neutral axis takes minimum stress so that we could partially replace the concrete above neutral axis by creating air voids using recycled polythene balls. Polythene balls of varying diameters of 75 mm, 65 mm and 35 mm were partially replaced in compression zone. Hence the usage of concrete in beams and self-weight of the beams got reduced considerably. The Load carrying capacity, Deflection of beams and crack patterns were studied and compared with conventional reinforced concrete beams.

  9. Finite element analysis of thrust angle contact ball slewing bearing

    Science.gov (United States)

    Deng, Biao; Guo, Yuan; Zhang, An; Tang, Shengjin

    2017-12-01

    In view of the large heavy slewing bearing no longer follows the rigid ring hupothesis under the load condition, the entity finite element model of thrust angular contact ball bearing was established by using finite element analysis software ANSYS. The boundary conditions of the model were set according to the actual condition of slewing bearing, the internal stress state of the slewing bearing was obtained by solving and calculation, and the calculated results were compared with the numerical results based on the rigid ring assumption. The results show that more balls are loaded in the result of finite element method, and the maximum contact stresses between the ball and raceway have some reductions. This is because the finite element method considers the ferrule as an elastic body. The ring will produce structure deformation in the radial plane when the heavy load slewing bearings are subjected to external loads. The results of the finite element method are more in line with the actual situation of the slewing bearing in the engineering.

  10. Abstract of reports on operating experiences with ball kilns

    Energy Technology Data Exchange (ETDEWEB)

    1943-11-05

    The first items discussed were the drums and this included discussion of linings, outlet-opening sizes and shapes, and the filling of the drum. The drum drive was recommended to be a high-speed squirrel cage motor with a Cycle-drive with a flanged-on-motor as an emergency drive. A discharge device, cranes, drum heating, preheating, steam superheater, temperatures, condensation, and disposal of the residue were also topics of discussion. Me 884 produced about 2000 tons of desanding residue monthly with 25% to 30% heavy oil. This heavy oil went to the dump with the sand. About 80% of this heavy oil could be recovered by carbonization. For this purpose, a kiln with the necessary conveying equipment was necessary. A description of this process was given. A flow sheet of processing filter residue from desanding was also given. Sludge carbonization in the ball kiln was also necessary. The ball kilns, as well as the screw kilns, were intended for the carbonization of the coal stall sludge and the residue from the carbonization centrifuges. The plant consisted of three main parts: the kiln, the discharge equipment for the carbonized residue, and the condensation for the oil and water vapors produced. A flow sheet of sludge carbonization in a ball kiln was given. 2 sketches.

  11. Decomposition of intermetallics during high-energy ball-milling

    International Nuclear Information System (INIS)

    Kwon, Y.S.; Choi, P.P.; Kim, J.S.; Kwon, D.H.; Gerasimov, K.B.

    2007-01-01

    The decomposition behavior of FeSn, CoSn and CoIn 2 intermetallics under high-energy ball-milling has been investigated using X-ray diffraction, calorimetric and magnetization measurements. Upon milling a large amount of the FeSn intermetallic decomposes into Fe 5 Sn 3 and FeSn 2 , where the average grain size of the product phases stays nearly constant with milling-time. Similar observations are made for the CoSn intermetallic, which decomposes into Co 3 Sn 2 and Sn. It is suggested that the mechanically driven decomposition of FeSn and CoSn results from local melting of powder particles due to high temperature pulses during ball collisions. In contrast to FeSn and CoSn, CoIn 2 does not undergo decomposition upon milling. The different decomposition behaviors of the studied intermetallics may be attributed to the volume changes occurring with a decomposition process. Whereas a negative volume change is associated with the decomposition of FeSn and CoSn into their product phases, the decomposition of CoIn 2 leads to an increase in volume. Hence, high local stresses under ball collisions are expected to make the mechanically induced decomposition of FeSn and CoSn favorable but rather hinder the decomposition of CoIn 2

  12. Lift crisis of a spinning table tennis ball

    Science.gov (United States)

    Miyazaki, T.; Sakai, W.; Komatsu, T.; Takahashi, N.; Himeno, R.

    2017-03-01

    The aerodynamic properties of a spinning table tennis ball were investigated using flight experiments. Using high-speed video cameras, the trajectory and rotation of an official ball (Nittaku 3-Star Premium), which was launched by a three rotor machine, were recorded. The drag and lift coefficients (C D and C L) were determined by analysing the video images. The measurements covered the speed and rotation range of typical table tennis shots in the form of the Reynolds number (Re) and dimensionless spin rate (SP), i.e. 3.0 × 104 < Re < 9.0 × 104 and 0 < SP < 1.0, and C D and C L were obtained as functions of Re and SP. We determined that the lift coefficient C L is not a monotonically increasing function of SP. A deep valley of C L was found around SP = 0.5, and the lift force exerted on a spinning ball almost vanished at Re = 9.0 × 104 and 0.48 < SP < 0.5. These results qualitatively agree with the results from recent wind tunnel tests, but quantitative differences owing to the unsteady nature of the flight experiments remain. This anomaly in the lift coefficient should be called the ‘lift crisis’.

  13. Brown carbon in tar balls from smoldering biomass combustion

    Science.gov (United States)

    Chakrabarty, R. K.; Moosmüller, H.; Chen, L.-W. A.; Lewis, K.; Arnott, W. P.; Mazzoleni, C.; Dubey, M. K.; Wold, C. E.; Hao, W. M.; Kreidenweis, S. M.

    2010-07-01

    We report the direct observation of laboratory production of spherical, carbonaceous particles - "tar balls" - from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Ångström coefficients (AAC) indicate that a class of light absorbing organic carbon (OC) with wavelength dependent imaginary part of its refractive index - optically defined as "brown carbon" - is an important component of tar balls. The spectrum of the imaginary parts of their complex refractive indices can be described with a Lorentzian-like model with an effective resonance wavelength in the ultraviolet (UV) spectral region. Sensitivity calculations for aerosols containing traditional OC (no absorption at visible and UV wavelengths) and brown carbon suggest that accounting for near-UV absorption by brown carbon leads to an increase in aerosol radiative forcing efficiency and increased light absorption. Since particles from smoldering combustion account for nearly three-fourths of the total carbonaceous aerosol mass emitted globally, inclusion of the optical properties of tar balls into radiative forcing models has significance for the Earth's radiation budget, optical remote sensing, and understanding of anomalous UV absorption in the troposphere.

  14. Brown carbon in tar balls from smoldering biomass combustion

    Directory of Open Access Journals (Sweden)

    R. K. Chakrabarty

    2010-07-01

    Full Text Available We report the direct observation of laboratory production of spherical, carbonaceous particles – "tar balls" – from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Ångström coefficients (AAC indicate that a class of light absorbing organic carbon (OC with wavelength dependent imaginary part of its refractive index – optically defined as "brown carbon" – is an important component of tar balls. The spectrum of the imaginary parts of their complex refractive indices can be described with a Lorentzian-like model with an effective resonance wavelength in the ultraviolet (UV spectral region. Sensitivity calculations for aerosols containing traditional OC (no absorption at visible and UV wavelengths and brown carbon suggest that accounting for near-UV absorption by brown carbon leads to an increase in aerosol radiative forcing efficiency and increased light absorption. Since particles from smoldering combustion account for nearly three-fourths of the total carbonaceous aerosol mass emitted globally, inclusion of the optical properties of tar balls into radiative forcing models has significance for the Earth's radiation budget, optical remote sensing, and understanding of anomalous UV absorption in the troposphere.

  15. Nonlinear Modeling and Dynamic Simulation Using Bifurcation and Stability Analyses of Regenerative Chatter of Ball-End Milling Process

    Directory of Open Access Journals (Sweden)

    Jeehyun Jung

    2016-01-01

    Full Text Available A dynamic model for a ball-end milling process that includes the consideration of cutting force nonlinearities and regenerative chatter effects is presented. The nonlinear cutting force is approximated using a Fourier series and then expanded into a Taylor series up to the third order. A series of nonlinear analyses was performed to investigate the nonlinear dynamic behavior of a ball-end milling system, and the differences between the nonlinear analysis approach and its linear counterpart were examined. A bifurcation analysis of points near the critical equilibrium points was performed using the method of multiple scales (MMS and the method of harmonic balance (MHB to analyse the local chatter behaviors of the system. The bifurcation analysis was conducted at two subcritical Hopf bifurcation points. It was also found that a ball-end milling system with nonlinear cutting forces near its critical equilibrium points is conditionally stable. The analysis and simulation results were compared with experimental data reported in the literature, and the physical significance of the results is discussed.

  16. System for remotely servicing a top loading captive ball valve

    International Nuclear Information System (INIS)

    Berry, S.M.; Porter, M.L.

    1996-01-01

    An attachment for facilitating servicing of a valve is disclosed including: an assembly composed of a valve seat defining a flow path, a flow control member movable relative to the valve seat for blocking or unblocking the valve seat, and a control device including a stem coupled to the flow control member and operable for moving the flow control member relative to the valve se housing for receiving the assembly, the housing having an opening via which the assembly can be removed from, and installed in, the housing, and the housing having a plurality of threaded studs which surround the opening and project away from the housing; a valve housing cover for closing and sealing the opening in the housing, the cover having a first bore for passage of the stem of the control device when the assembly is installed in the housing and a plurality of second bores each located for passage of a respective stud when the cover closes the opening in the housing. A plurality of threaded nuts are engageable with the studs for securing the cover to the housing when the cover closes the opening in the housing, wherein the attachment comprises: a plurality of nut guide devices removable from the housing and each operatively associated with a respective stud for retaining a respective nut and guiding the respective nut into alignment with the respective stud to enable the respective nut to be rotated into engagement with the respective stud; and aligning the nut guide devices with the studs. 7 figs

  17. Ball assisted device for analytical surface sampling

    Science.gov (United States)

    ElNaggar, Mariam S; Van Berkel, Gary J; Covey, Thomas R

    2015-11-03

    A system for sampling a surface includes a sampling probe having a housing and a socket, and a rolling sampling sphere within the socket. The housing has a sampling fluid supply conduit and a sampling fluid exhaust conduit. The sampling fluid supply conduit supplies sampling fluid to the sampling sphere. The sampling fluid exhaust conduit has an inlet opening for receiving sampling fluid carried from the surface by the sampling sphere. A surface sampling probe and a method for sampling a surface are also disclosed.

  18. A crystal ball made of agents

    Directory of Open Access Journals (Sweden)

    José Miguel Castillo

    2010-12-01

    Full Text Available This article presents an agent-based solution to model the opinions of an experts group with the aim of predicting possible future scenarios.The need to envision the future is not new; it has existed since the beginning of human-kind. What it is new is the applicable technology that is available in a specific period of time.It is not usual to find a critical social system which evolves according to predictable guidelines or tendencies. Because of that reason, technical prediction based on past and present data is not reliable.This paper includes the process description of eliciting information from a group of experts and a real case study.

  19. The effect of ball compression on the match-play characteristics of elite junior tennis players.

    Science.gov (United States)

    Kachel, Kim; Buszard, Tim; Reid, Machar

    2015-01-01

    The purpose of this article was to examine the effect of equipment scaling, through the modification of tennis ball compression, on elite junior tennis players (aged 10 years) within a match-play context. The two types of ball compressions that were compared were the standard compression (the normal ball) and 75% compression (termed the modified ball). Ten boys and 10 girls participated in the study. Participants were stratified into pairs based on their Australian Age Ranking and gender. Each pair played two two-set matches: one match with standard compression balls and one match with modified balls. The characteristics of each match were analysed and compared. The results showed that the use of the modified ball increased rally speed, allowed players to strike the ball at a lower (more comfortable) height on their groundstrokes and increased the number of balls played at the net. Ball compression had no effect on the relative number of winners, forehands, backhands, first serves in and double faults. The results are discussed in relation to skill acquisition for skilled junior tennis players.

  20. An improved effective microorganism (EM) soil ball-making method for water quality restoration.

    Science.gov (United States)

    Park, Gun-Seok; Khan, Abdur Rahim; Kwak, Yunyoung; Hong, Sung-Jun; Jung, ByungKwon; Ullah, Ihsan; Kim, Jong-Guk; Shin, Jae-Ho

    2016-01-01

    Soil balls containing the so-called effective microorganisms (EM) have been applied to improve water quality of small ponds, lakes, and streams worldwide. However, neither the physical conditions facilitating their proper application nor the diversity of microbial community in such soil balls have been investigated. In this study, the application of 0.75% of hardener to the soil balls exerted almost neutral pH (pH 7.3) which caused up to a fourfold increased hardness of the soil ball. Moreover, the 0.75% of hardener in the soil ball also improved the water quality due to a significant reduction in dissolved oxygen, total phosphorus, and total nitrogen contents. Metagenomic analysis of the microbial community in the soil ball with 0.75% hardener was compared with control (traditional soil ball) through next-generation sequencing. The traditional soil ball microbial community comprised 96.1% bacteria, 2.7% eukaryota, and 1% archaea, whereas the soil ball with 0.75% hardener comprised 71.4% bacteria, 27.9% eukaryota, and 0.2% viruses. Additionally, metagenomic profiles for both traditional and improved soil balls revealed that the various xenobiotic biodegradation, such as those for caprolactam, atrazine, xylene, toluene, styrene, bisphenol, and chlorocyclohexane might be responsible for organic waste cleanup.

  1. Visualization of air flow around soccer ball using a particle image velocimetry

    Science.gov (United States)

    Hong, Sungchan; Asai, Takeshi; Seo, Kazuya

    2015-10-01

    A traditional soccer ball is constructed using 32 pentagonal and hexagonal panels. In recent years, however, the likes of the Teamgeist and Jabulani balls, constructed from 14 and 8 panels, respectively, have entered the field, marking a significant departure from conventionality in terms of shape and design. Moreover, the recently introduced Brazuca ball features a new 6-panel design and has already been adopted by many soccer leagues. However, the shapes of the constituent panels of these balls differ substantially from those of conventional balls. Therefore, this study set out to investigate the flight and aerodynamic characteristics of different orientations of the soccer ball, which is constructed from panels of different shapes. A wind tunnel test showed substantial differences in the aerodynamic forces acting on the ball, depending on its orientation. Substantial differences were also observed in the aerodynamic forces acting on the ball in different directions, corresponding to its orientation and rotation. Moreover, two-dimensional particle image velocimetry (2D-PIV) measurements showed that the boundary separation varies depending on the orientation of the ball. Based on these results, we can conclude that the shape of the panels of a soccer ball substantially affects its flight trajectory.

  2. A Method to Determine the Ball Filling, in Miduk Copper Concentrator SAG Mill

    Directory of Open Access Journals (Sweden)

    Ali Kamali Moaveni

    2012-12-01

    Full Text Available The aim of this research work was to investigate on the ball filling estimation of Miduk semi-autogenous (SAG Mill via an utilized method. Miduk copper concentrator is located in Kerman Province, Iran, and its size reduction stage includes one gyratory crusher which feeds one SAG mill (9.75 dia.(m*3.88 length(m following two parallel ball mills (5dia.(m*7lenght(m. After SAG mill, a trommel screen produces two over and under size materials which the oversize part is circulated into SAG mill and undersize reports to hydrocyclone for further process. Ball filling identify was implemented in this work using mill`s load sampling and ball abrasion test.These methods could estimate ball filling variation with easy, undeniable, and useful tests. Also, these tests have shown the digression of operating ball filling amount and its manual designed. To make more homogenous load, mill load samplings were carried out from 6 points after whirling the mill via inching motor. Acquired load sampling results were compared with ball abrasion tests. Ball abrasion tests were calculated for 3 different conditions include maximum, average, and minimum ball abrasion. However, the calculated maximum and minimum conditions never occurred. However, these are just for obtaining to ball filling variation in the mill. The results obtained from this work show, the ball filling percentage variation is between 1.2– 3.7% which is lower than mill ball filling percentage, according to the designed conditions (15%. In addition, acquired load samplings result for mill ball filling was 1.3%.

  3. The effects of ball possession status on physical and technical indicators during the 2014 FIFA World Cup Finals.

    Science.gov (United States)

    da Mota, Gustavo Ribeiro; Thiengo, Carlos Rogério; Gimenes, Samuel Valencia; Bradley, Paul S

    2016-01-01

    This study examined the effect of high- (HPBPT) and low-percentage ball possession (LPBPT) on physical and technical indicators during 2014 FIFA World Cup matches. This would enable a regression model to be constructed to further understand the impact of different ball possession (BP) strategies on match performance. Data were collected from 346 international soccer players using a multiple-camera computerised tracking system. Although players in HPBPT covered lower distances (P 0.05) at medium and high speeds. Players in LPBPT covered more distance without BP but less with BP than HPBPT (P technical indicators highlighted the importance of distances covered (total, with and without BP), time spent in the attacking third and successful short passes during matches. In practical terms, high or low BP does not influence the activity patterns of international matches although HPBPT spend more time in offensive areas of the pitch.

  4. Analytical Modeling of a Ball Screw Feed Drive for Vibration Prediction of Feeding Carriage of a Spindle

    Directory of Open Access Journals (Sweden)

    Lei Zhang

    2016-01-01

    Full Text Available An analytical modeling approach for ball screw feed drives is proposed to predict the dynamic behavior of the feeding carriage of a spindle. Mainly considering the rigidity of linear guide modules, a ball-screw-feeding spindle is modeled by a mass-spring system. The contact stiffness of rolling interfaces in linear guide modules is accurately calculated according to the Hertzian theory. Next, a mathematical model is derived using the Lagrange method. The presented model is verified by conducting modal experiments. It is found that the simulated results correspond closely with the experimental data. In order to show the applicability of the proposed mathematical model, parameter-dependent dynamics of the feeding carriage of the spindle is investigated. The work will contribute to the vibration prediction of spindles.

  5. Ball Throwing Without a Ball: Pantomimed Motor Execution Primes the Imagination That an Object is Traveling the Required Distance.

    Science.gov (United States)

    Tanaka, Hideyuki; Mizuno, Wataru; Iwami, Masato

    2016-10-01

    This study used a pantomime paradigm to investigate whether simulated motor actions are generally effective in estimating the force necessary to accurately drive an object toward the required target. Eleven subjects were asked to vertically throw a rubber ball toward three different targets and then catch it, all while sitting in a chair (ACT). In addition, they performed the same task under a condition whereby mechanical interactions with the rubber ball were minimized. This condition encompassed two different modes: pantomime (PANTO) and imagination without swings (IMAGE). PANTO reproduced the motor patterns observed during ACT. The maximum amplitudes and maximum accelerations of the upward swing movements scaled well in linear proportion to the target distances, although the maximum accelerations were significantly smaller than those in the ACT trials. IMAGE led to the overestimation of the ball's flight time, which is represented by the release-catch intervals. PANTO significantly reduced this tendency. These results suggest that pantomimed motor execution can prime more realistic mental simulations of object motion when compared with purely imagined motor execution.

  6. Extended Life Testing of Duplex Ball Bearings

    Science.gov (United States)

    Mobley, Jeffrey; Robertson, Michael; Hodges, Charles

    2016-01-01

    Sierra Nevada Corporation’s Space Systems performed bearing life testing for the Scan Mirror Motor/Encoder Assembly (SMMA), part of the Scan Mirror Assembly on-board the Aerosol Polarimetry Sensor (APS) on the NASA Glory Spacecraft. The baseline bearing life test duration extended beyond the launch date for the Glory Spacecraft; a risk that the program was willing to undertake with the understanding that if any anomalies or failures occurred before the required life was achieved, then the mission objectives or operating profile could be modified on orbit to take those results into account. Even though the Glory Spacecraft failed to reach orbit during its launch in March of 2011, the bearing life testing was continued through a mutual understanding of value between Sierra Nevada Corporation and our customer; with a revised goal of testing to failure rather than completing a required number of life cycles. Life testing thus far has not only exceeded the original mission required life, but has also exceeded the published test data for Cumulative Degradation Factor (CDF) from NASA/CR-2009-215681. Many lessons were learned along the way regarding long life testing. The bearing life test has been temporarily suspended due to test support equipment issues.

  7. A general model for preload calculation and stiffness analysis for combined angular contact ball bearings

    Science.gov (United States)

    Zhang, Jinhua; Fang, Bin; Hong, Jun; Wan, Shaoke; Zhu, Yongsheng

    2017-12-01

    The combined angular contact ball bearings are widely used in automatic, aerospace and machine tools, but few researches on the combined angular contact ball bearings have been reported. It is shown that the preload and stiffness of combined bearings are mutual influenced rather than simply the superposition of multiple single bearing, therefore the characteristic calculation of combined bearings achieved by coupling the load and deformation analysis of a single bearing. In this paper, based on the Jones quasi-static model and stiffness analytical model, a new iterative algorithm and model are proposed for the calculation of combined bearings preload and stiffness, and the dynamic effects include centrifugal force and gyroscopic moment have to be considered. It is demonstrated that the new method has general applicability, the preload factors of combined bearings are calculated according to the different design preloads, and the static and dynamic stiffness for various arrangements of combined bearings are comparatively studied and analyzed, and the influences of the design preload magnitude, axial load and rotating speed are discussed in detail. Besides, the change rule of dynamic contact angles of combined bearings with respect to the rotating speed is also discussed. The results show that bearing arrangement modes, rotating speed and design preload magnitude have a significant influence on the preload and stiffness of combined bearings. The proposed formulation provides a useful tool in dynamic analysis of the complex bearing-rotor system.

  8. Experimental and theoretical study of friction torque from radial ball bearings

    Science.gov (United States)

    Geonea, Ionut; Dumitru, Nicolae; Dumitru, Ilie

    2017-10-01

    In this paper it is presented a numerical simulation and an experimental study of total friction torque from radial ball bearings. For this purpose it is conceived a virtual CAD model of the experimental test bench for bearing friction torque measurement. The virtual model it is used for numerical simulation in Adams software, that allows dynamic study of multi-body systems and in particularly with facility Adams Machinery of dynamic behavior of machine parts. It is manufactured an experimental prototype of the test bench for radial ball bearings friction torque measurement. In order to measure the friction torque of the tested bearings it is used an equal resistance elastic beam element, with strain gauge transducer to measure bending deformations. The actuation electric motor of the bench has the shaft mounted on two bearings and the motor housing is fixed to the free side of the elastic beam, which is bended by a force proportional with the total friction torque. The beam elastic element with strain gauge transducer is calibrated in order to measure the force occurred. Experimental determination of the friction torque is made for several progressive radial loads. It is established the correlation from the friction torque and bearing radial load. The bench allows testing of several types and dimensions of radial bearings, in order to establish the bearing durability and of total friction torque.

  9. Contouring control of ball screw mechanism using a practical control method

    Science.gov (United States)

    Hasim, Norhaslinda; Chong, Shin Horng; Keat Hee, Wai; Ibrahim, Zulkifilie

    2017-06-01

    This paper presents an improved practical controller for enhancing the contouring motion of a ball screw mechanism. Practically, a high motion control performance and ease of controller design are desired. A continuous motion nominal characteristic trajectory following (CM NCTF) control has been considered to fulfill the desired performance. The NCTF controller comprises of a nominal characteristic trajectory (NCT) and a PI compensator where the controller parameters are easily determined and it is free from exact modeling. In the present paper, the CM NCTF controller has been proposed in order to enhance the continuous motion performance such as tracking and contouring accuracies of the system. In order to justify the advantages, the CM NCTF controller was examined in tracking motion performances using an AC driven X-Y ball screw mechanism. The bandwidth of the CM NCTF controller is larger compared to the PID controller, therefore, it proved that the CM NCTF controller has fast response as compared with the PID controller. The experimental results proved that the CM NCTF controller achieves better contouring motion performances than the PID controller by showing a two times smaller motion error.

  10. Kicking velocity and effect on match performance when using a smaller, lighter ball in women's football

    DEFF Research Database (Denmark)

    Andersen, Thomas B.; Krustrup, Peter; Bendiksen, Mads

    2016-01-01

    in passing success rate (NB: 68±1% and SB: 68±1%, p>0.05). In conclusion, high-level adult female footballers had a higher kicking speed when using a smaller, lighter ball, but no differences were observed during match-play with the 2 ball types in respect of technical-tactical and physical match performance......The present study evaluated the effect of a smaller, lighter ball on kicking speed and technical-tactical and physical match performance in high-level adult female footballers. In the laboratory test setting, the peak ball velocity was 6% higher with the new ball (NB) than the standard ball (SB.......08±0.42 and 1.94±0.38 km; p>0.05) and match-induced decrement in Yo-Yo IR1 performance (28 vs. 31%, respectively, p

  11. Ball-on-DiscTribometers Protocol Development: Loss of Lubrication Evaluation

    Science.gov (United States)

    2016-02-01

    average of the ball’s and disc’s linear velocities. The slip percentage is shown in Eq. 1. The ball thermocouple (Tb) and disc thermocouple ( Td ...surfaces rubbed against each other until the head of the bolt was caught on the top of the oil slinger and broke the screw at its connection to the spindle...single-tooth load capacity Tb ball thermocouple TC thermocouple Td disc thermocouple Ub ball linear velocity Ud disc linear velocity Ue

  12. AN EXPERIMENTAL INVESTIGATION OF NEGATIVE POINT-PLANE CORONA AND ITS RELATION TO BALL LIGHTNING

    Science.gov (United States)

    Existing theories of ball lightning are briefly discussed. the corona discharge from a negative point flows in a series of regular pulses called...trichel pulses. based on the theoretical relationship between corona discharge (trichel pulses) and ball lightning , an experimental program is developed...pulse-repetition frequencies of a few mc/s have been the highest attained in the course of the experiments. the results obtained are then discussed as they concern ball lightning .

  13. On the stability of a very dense deuterium-tritium plasma ball

    OpenAIRE

    Kornyushin, Yuri

    2010-01-01

    General conditions of stability of a very dense deuterium-tritium plasma ball are discussed. It is shown that the decrease in the size of a plasma ball (increase in the plasma density) can be expected only when the temperature and the pressure in the plasma ball are kept high enough for all the particles, the nuclei and the delocalized electrons, to be described by classical statistics.

  14. Pengaruh Slot Rugby Ball Terhadap Antena Mikrostrip Sehingga Dapat Bekerja Pada Ultra Wideband (UWB)

    OpenAIRE

    M. Fauzan Edy Purnomo, ST., MT., Prilla Ayu Wendaria., Rudy Yuwono, ST., M.Sc

    2013-01-01

    Penelitian ini membahas tentang pengaruh slot rugby ball pada antena mikrostrip annular ring sehingga dapat bekerja pada ultra wideband (UWB). Antena mikrostrip annular ring dengan slot rugby ball ini dirancang dengan menggunakan feed line sebagai metode pencatuannya. Dimensi antena diperoleh melalui perhitungan dan optimasi serta dilakukan simulasi dengan menggunakan software HFSS AnsoftTM versi 13. Hasil simulasi antena mikrostrip annular ring dengan slot rugby ball menunjukkan frekuensi ...

  15. Solving ball lightning—A reply to Stefan and Massey (2008)

    Science.gov (United States)

    Coleman, Peter Francis

    2009-06-01

    Comments are made on the ball lightning paper of Stephan and Massey [Stefan, K.D., Massey, N., 2008. Burning molten metallic sphere: One class of ball lightning? Journal of Atmospheric and Solar-Terrestrial Physics 70, 1589-1596] that describes their [`]welding drop' theory. An alternative theory is offered based on combustion inside an atmospheric vortex. The [`]vortex fireball' hypothesis has good explanatory capability in regard to published ball lightning properties.

  16. Sports selection of volley-ball players: genetic criteria to define motor endowments (information 2)

    OpenAIRE

    Ablikovа, Alisa; Serhiyenko, Leonid

    2016-01-01

    Purpose: to define genetic criteria which can be used while selecting gifted volley-ball players. Material & Methods: the study involved 50 high class volley-ball players and 50 women at the age of 20–29 years old. There were used methods of theoretical analysis and general conclusion, systematic analysis, genealogic methods of genetics, methods of dermatoglyphic and serologic analyses. Results: family gift for going in for sport was detected. At was revealed that gifted volley-ball playe...

  17. Radiologic characteristics of sinonasal fungus ball: an analysis of 119 cases

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Young-Joon; Kim, Kyubo (Dept. of Otorhinolaryngology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of)); Kim, Jinna (Dept. of Radiology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of)); Lee, Jeung-Gweon; Kim, Chang-Hoon (Dept. of Otorhinolaryngology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); The Airway Mucus Institute, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of)), email: entman@yuhs.ac; Yoon, Joo-Heon (Dept. of Otorhinolaryngology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); The Airway Mucus Institute, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); Research Center for Human Natural Defense System, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); BK21 Project for Medical Science, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of))

    2011-09-15

    Background. It is important to differentiate sinonasal fungus ball from non-fungal sinusitis and other forms of fungal sinusitis in order to determine the optimal treatment. In particular, a sinonasal fungus ball, a non-invasive fungal sinusitis, can be characterized by radiologic findings before surgery. Purpose. To differentiate a sinonasal fungus ball from other types of sinusitis and determine optimal treatment on the basis of radiologic findings before surgery. Material and Methods. We studied 119 patients with clinically and pathologically proven sinonasal fungus balls. Their condition was evaluated radiologically with contrast-enhanced CT (99 patients), non-contrast CT (18 patients) and/or MRI (17 patients) prior to sinonasal surgery. Results. Calcifications were found in 78 of 116 (67.2%) patients who underwent CT scans for fungus ball. As opposed to non-contrast CT scans, contrast CT scans revealed hyper attenuating fungal ball in 82.8% and enhanced inflamed mucosa in 65.5% of the patients, respectively. On MRI, most sinonasal fungal balls showed iso- or hypointensity on T1-weighted images and marked hypointensity on T2-weighted images. Inflamed mucosal membranes were noted and appeared as hypointense on T1-weighted images (64.7%) and hyperintense on T2-weighted images (88.2%). Conclusion. When there are no calcifications visible on the CT scan, a hyper attenuating fungal ball located in the central area of the sinus with mucosal thickening on enhanced CT scans is an important feature of a non-invasive sinonasal fungus ball. On MRI, a sinonasal fungus ball has typical features of a marked hypointense fungus ball with a hyperintense mucosal membrane in T2-weighted images. A contrast-enhanced CT scan or MRI provides sufficient information for the preoperative differentiation of a sinonasal fungus ball from other forms of sinusitis

  18. Fabrication and Study of Micro Monolithic Tungsten Ball Tips for Micro/Nano-CMM Probes

    OpenAIRE

    Ruijun Li; Chen Chen; Kuangchao Fan; Zhiwei Wang; Fangfang Liu; Qiangxian Huang

    2018-01-01

    Micro ball tips with high precision, small diameter, and high stiffness stems are required to measure microstructures with high aspect ratio. Existing ball tips cannot meet such demands because of their weak qualities. This study used an arc-discharge melting method to fabricate a micro monolithic tungsten ball tip on a tungsten stylus. The principles of arc discharge and surface tension phenomenon were introduced. The experimental setup was designed and established. Appropriate process param...

  19. Radiologic characteristics of sinonasal fungus ball: an analysis of 119 cases

    International Nuclear Information System (INIS)

    Seo, Young-Joon; Kim, Kyubo; Kim, Jinna; Lee, Jeung-Gweon; Kim, Chang-Hoon; Yoon, Joo-Heon

    2011-01-01

    Background. It is important to differentiate sinonasal fungus ball from non-fungal sinusitis and other forms of fungal sinusitis in order to determine the optimal treatment. In particular, a sinonasal fungus ball, a non-invasive fungal sinusitis, can be characterized by radiologic findings before surgery. Purpose. To differentiate a sinonasal fungus ball from other types of sinusitis and determine optimal treatment on the basis of radiologic findings before surgery. Material and Methods. We studied 119 patients with clinically and pathologically proven sinonasal fungus balls. Their condition was evaluated radiologically with contrast-enhanced CT (99 patients), non-contrast CT (18 patients) and/or MRI (17 patients) prior to sinonasal surgery. Results. Calcifications were found in 78 of 116 (67.2%) patients who underwent CT scans for fungus ball. As opposed to non-contrast CT scans, contrast CT scans revealed hyper attenuating fungal ball in 82.8% and enhanced inflamed mucosa in 65.5% of the patients, respectively. On MRI, most sinonasal fungal balls showed iso- or hypointensity on T1-weighted images and marked hypointensity on T2-weighted images. Inflamed mucosal membranes were noted and appeared as hypointense on T1-weighted images (64.7%) and hyperintense on T2-weighted images (88.2%). Conclusion. When there are no calcifications visible on the CT scan, a hyper attenuating fungal ball located in the central area of the sinus with mucosal thickening on enhanced CT scans is an important feature of a non-invasive sinonasal fungus ball. On MRI, a sinonasal fungus ball has typical features of a marked hypointense fungus ball with a hyperintense mucosal membrane in T2-weighted images. A contrast-enhanced CT scan or MRI provides sufficient information for the preoperative differentiation of a sinonasal fungus ball from other forms of sinusitis

  20. The gym ball as a chair for the back pain patient: A two case report

    OpenAIRE

    Merritt, Larry G; Merritt, Celynne M

    2007-01-01

    The popularity of the gym ball has led to its increased use in programs designed for fitness, rehabilitation and prevention. Some people are using the gym ball to replace the office chair and others are sitting on it at home, which has created some controversy among therapists, researchers, ergonomics experts and the general public. The controversy is due in part to a lack of knowledge and experience with this application for the gym ball. Both patients in this report were suffering with low ...