Transport Coefficients of Fluids
Eu, Byung Chan
2006-01-01
Until recently the formal statistical mechanical approach offered no practicable method for computing the transport coefficients of liquids, and so most practitioners had to resort to empirical fitting formulas. This has now changed, as demonstrated in this innovative monograph. The author presents and applies new methods based on statistical mechanics for calculating the transport coefficients of simple and complex liquids over wide ranges of density and temperature. These molecular theories enable the transport coefficients to be calculated in terms of equilibrium thermodynamic properties, and the results are shown to account satisfactorily for experimental observations, including even the non-Newtonian behavior of fluids far from equilibrium.
Transport coefficients of heavy baryons
Tolos, Laura; Torres-Rincon, Juan M.; Das, Santosh K.
2016-08-01
We compute the transport coefficients (drag and momentum diffusion) of the low-lying heavy baryons Λc and Λb in a medium of light mesons formed at the later stages of high-energy heavy-ion collisions. We employ the Fokker-Planck approach to obtain the transport coefficients from unitarized baryon-meson interactions based on effective field theories that respect chiral and heavy-quark symmetries. We provide the transport coefficients as a function of temperature and heavy-baryon momentum, and analyze the applicability of certain nonrelativistic estimates. Moreover we compare our outcome for the spatial diffusion coefficient to the one coming from the solution of the Boltzmann-Uehling-Uhlenbeck transport equation, and we find a very good agreement between both calculations. The transport coefficients for Λc and Λb in a thermal bath will be used in a subsequent publication as input in a Langevin evolution code for the generation and propagation of heavy particles in heavy-ion collisions at LHC and RHIC energies.
Use of a Correlation Coefficient for Conditional Averaging.
1997-04-01
data. Selection of the sine function period and a correlation coefficient threshold are discussed. Also examined are the effects of the period and...threshold level on the number of ensembles captured for inclusion for conditional averaging. Both the selection of threshold correlation coefficient and the...A method of collecting ensembles for conditional averaging is presented that uses data collected from a plane mixing layer. The correlation
Sergievskii, V. V.; Rudakov, A. M.
2016-08-01
The model that considers the nonideality of aqueous solutions of electrolytes with allowance for independent contributions of hydration of ions of various types and electrostatic interactions was substantiated using the cluster ion model. The empirical parameters in the model equations were found to be the hydrophilic and hydrophobic hydration numbers of ions in the standard state and the dispersion of their distribution over the stoichiometric coefficients. A mathematically adequate description of the concentration dependences of the osmotic coefficients and average ion activity coefficients of electrolytes was given for several systems. The difference in the rate of the decrease in the hydrophilic and hydrophobic hydration numbers of ions leads to extremum concentration dependences of the osmotic coefficients, which were determined by other authors from isopiestic data for many electrolytes and did not find explanation.
A coefficient average approximation towards Gutzwiller wavefunction formalism
Liu, Jun; Yao, Yongxin; Wang, Cai-Zhuang; Ho, Kai-Ming
2015-06-01
Gutzwiller wavefunction is a physically well-motivated trial wavefunction for describing correlated electron systems. In this work, a new approximation is introduced to facilitate the evaluation of the expectation value of any operator within the Gutzwiller wavefunction formalism. The basic idea is to make use of a specially designed average over Gutzwiller wavefunction coefficients expanded in the many-body Fock space to approximate the ratio of expectation values between a Gutzwiller wavefunction and its underlying noninteracting wavefunction. To check with the standard Gutzwiller approximation (GA), we test its performance on single band systems and find quite interesting properties. On finite systems, we noticed that it gives superior performance over GA, while on infinite systems it asymptotically approaches GA. Analytic analysis together with numerical tests are provided to support this claimed asymptotical behavior. Finally, possible improvements on the approximation and its generalization towards multiband systems are illustrated and discussed.
A coefficient average approximation towards Gutzwiller wavefunction formalism.
Liu, Jun; Yao, Yongxin; Wang, Cai-Zhuang; Ho, Kai-Ming
2015-06-24
Gutzwiller wavefunction is a physically well-motivated trial wavefunction for describing correlated electron systems. In this work, a new approximation is introduced to facilitate the evaluation of the expectation value of any operator within the Gutzwiller wavefunction formalism. The basic idea is to make use of a specially designed average over Gutzwiller wavefunction coefficients expanded in the many-body Fock space to approximate the ratio of expectation values between a Gutzwiller wavefunction and its underlying noninteracting wavefunction. To check with the standard Gutzwiller approximation (GA), we test its performance on single band systems and find quite interesting properties. On finite systems, we noticed that it gives superior performance over GA, while on infinite systems it asymptotically approaches GA. Analytic analysis together with numerical tests are provided to support this claimed asymptotical behavior. Finally, possible improvements on the approximation and its generalization towards multiband systems are illustrated and discussed.
Phase-averaged transport for quasiperiodic Hamiltonians
Bellissard, J; Schulz-Baldes, H
2002-01-01
For a class of discrete quasi-periodic Schroedinger operators defined by covariant re- presentations of the rotation algebra, a lower bound on phase-averaged transport in terms of the multifractal dimensions of the density of states is proven. This result is established under a Diophantine condition on the incommensuration parameter. The relevant class of operators is distinguished by invariance with respect to symmetry automorphisms of the rotation algebra. It includes the critical Harper (almost-Mathieu) operator. As a by-product, a new solution of the frame problem associated with Weyl-Heisenberg-Gabor lattices of coherent states is given.
Transport Coefficients of Interacting Hadrons
Wiranata, Anton
A detailed quantitative comparison between the results of shear viscosities from the Chapman-Enskog and Relaxation Time methods is performed for the following test cases with specified elastic differential cross sections between interacting hadrons: (1) The non-relativistic, relativistic and ultra-relativistic hard sphere gas with angle and energy independent differential cross section sigma = a2/4, where a is the hard sphere radius, (2) The Maxwell gas with sigma(g, theta) = mGamma(theta)/2g, where m is the mass of the heat bath particles, Gamma(theta) is an arbitrary function of theta, and g is the relative velocity, (3) Chiral pions for which the t-averaged cross section sigma = s/(64pi2 f4p ) x (1 + 1/3 x cos2 theta), where s and t are the usual Mandelstam variables and fpi is the pion-decay constant, and (4) Massive pions for which the differential elastic cross section is taken from experiments. Quantitative results of the comparative study conducted revealed that • the extent of agreement (or disagreement) depends very sensitively on the energy dependence of the differential cross sections employed, stressing the need to combine all available experimental knowledge concerning differential cross sections for low mass hadrons and to supplement it with theoretical guidance for the as yet unknown cross sections so that the temperature dependent shear viscosity to entropy ratio can be established for use in viscous hydordynamics. • The result found for the ultra-relativistic hard sphere gas for which the shear viscosity etas = 1.2676 k BT c--1/(pia 2) offers the opportunity to validate ultra-relativistic quantum molecular dynamical (URQMD) codes that employ Green-Kubo techniques. • shear viscosity receives only small contributions from number changing inelastic processes. The dependence of the bulk viscosity on the adiabatic speed of sound is studied in depth highlighting why only hadrons in the intermediate relativistic regime contribute the most to the
Interpreting Bivariate Regression Coefficients: Going beyond the Average
Halcoussis, Dennis; Phillips, G. Michael
2010-01-01
Statistics, econometrics, investment analysis, and data analysis classes often review the calculation of several types of averages, including the arithmetic mean, geometric mean, harmonic mean, and various weighted averages. This note shows how each of these can be computed using a basic regression framework. By recognizing when a regression model…
Transport Coefficients and nPI Methods
Carrington, M E
2011-01-01
Transport coefficients can be obtained from 2-point correlators using the Kubo formulae. It has been shown that the full leading order result for electrical conductivity and (QCD) shear viscosity is contained in the re-summed 2-point function that is obtained from the 3-loop 3PI effective action. The theory produces all leading order contributions without the necessity for power counting, and in this sense it provides a natural framework for the calculation and suggests that one can calculate the next-to-leading contribution to transport coefficients from the 4-loop 4PI effective action. The integral equations have been derived for shear viscosity for a scalar theory with cubic and quartic interactions, with a non-vanishing field expectation value. We review these results, and explain how the calculation could be done at higher orders.
Transport coefficients in Chiral Perturbation Theory
Energy Technology Data Exchange (ETDEWEB)
Fernandez-Fraile, D.; Gomez Nicola, A. [Universidad Complutense, Departamentos de Fisica Teorica I y II, Madrid (Spain)
2007-03-15
We present recent results on the calculation of transport coefficients for a pion gas at zero chemical potential in Chiral Perturbation Theory (ChPT) using the Linear Response Theory (LRT). More precisely, we show the behavior of DC conductivity and shear viscosity at low temperatures. To compute transport coefficients, the standard power counting of ChPT has to be modified. The effects derived from imposing unitarity are also analyzed. As physical applications in relativistic heavy-ion collisions, we show the relation of the DC conductivity to soft-photon production and phenomenological effects related to a non-zero shear viscosity. In addition, our values for the shear viscosity to entropy ratio satisfy the KSS bound. (orig.)
Hadronic Transport Coefficients from Effective Field Theories
Torres-Rincon, Juan M
2012-01-01
This dissertation focuses on the calculation of transport coefficients in the matter created in a relativistic heavy-ion collision after the chemical freeze-out. This matter can be well approximated by a pion gas out of equilibrium. We describe the theoretical framework to obtain the shear and bulk viscosities, the thermal and electrical conductivities and the flavor diffusion coefficients of a meson gas at low temperatures. To describe the interactions of the degrees of freedom, we use effective field theories with chiral and heavy quark symmetries. We introduce the unitarization methods in order to obtain a scattering amplitude that satisfies the unitarity condition exactly. We perform the calculation of the transport properties of the low temperature phase of quantum chromodynamics -the hadronic medium- that can be used in the hydrodynamic simulations of a relativistic heavy-ion collision and its subsequent evolution. We show that the shear viscosity over entropy density exhibits a minimum in a phase trans...
Energy Technology Data Exchange (ETDEWEB)
Paszkuta, M.; Rosanne, M.; Adler, P.M. [Sisyphe, 75 - Paris (France)
2006-10-15
The coefficients that characterize the simultaneous transports of mass, heat, solute and current through compact clays are experimentally and theoretically determined. The role of a characteristic length scale that can be derived from conductivity and permeability is illustrated for the electrokinetic coefficients. The macroscopic Soret coefficient in clays was found five times larger than in the free fluid, presumably because of extra couplings with electrical phenomena. (authors)
Comment on "Generalized exclusion processes: Transport coefficients"
Becker, T.; Nelissen, K.; Cleuren, B.; Partoens, B.; Van den Broeck, C.
2016-04-01
In a recent paper, Arita et al. [Phys. Rev. E 90, 052108 (2014), 10.1103/PhysRevE.90.052108] consider the transport properties of a class of generalized exclusion processes. Analytical expressions for the transport-diffusion coefficient are derived by ignoring correlations. It is claimed that these expressions become exact in the hydrodynamic limit. In this Comment, we point out that (i) the influence of correlations upon the diffusion does not vanish in the hydrodynamic limit, and (ii) the expressions for the self- and transport diffusion derived by Arita et al. are special cases of results derived in Becker et al. [Phys. Rev. Lett. 111, 110601 (2013), 10.1103/PhysRevLett.111.110601].
Estimating transport coefficients in hot and dense quark matter
Deb, Paramita; Mishra, Hiranmaya
2016-01-01
We compute the transport coefficients-- namely, coefficients of shear and bulk viscosity as well as thermal conductivity for hot and dense quark matter. The calculations are performed within the Nambu Jona Lasinio (NJL) model. The estimation of the transport coefficients is made using a quasi particle approach of solving Boltzmann kinetic equation within the relaxation time approximation. The transition rates are calculated in a manifestly covariant manner to estimate the thermal averaged cross sections for quark quark as well as quark anti-quark scattering. The calculations are performed for finite chemical potential also. Within the parameters of the model, the ratio of shear viscosity to entropy density has a minimum at the Mott transition temperature. At vanishing chemical potential, the ratio of bulk viscosity to entropy density, on the other hand, decrease with temperature with a sharp decrease near the critical temperature and vanishes beyond it. At finite chemical potential, however, it increases slow...
Transport coefficients of a relativistic plasma
Pike, O. J.; Rose, S. J.
2016-05-01
In this work, a self-consistent transport theory for a relativistic plasma is developed. Using the notation of Braginskii [S. I. Braginskii, in Reviews of Plasma Physics, edited by M. A. Leontovich (Consultants Bureau, New York, 1965), Vol. 1, p. 174], we provide semianalytical forms of the electrical resistivity, thermoelectric, and thermal conductivity tensors for a Lorentzian plasma in a magnetic field. This treatment is then generalized to plasmas with arbitrary atomic number by numerically solving the linearized Boltzmann equation. The corresponding transport coefficients are fitted by rational functions in order to make them suitable for use in radiation-hydrodynamic simulations and transport calculations. Within the confines of linear transport theory and on the assumption that the plasma is optically thin, our results are valid for temperatures up to a few MeV. By contrast, classical transport theory begins to incur significant errors above kBT ˜10 keV, e.g., the parallel thermal conductivity is suppressed by 15% at kBT =20 keV due to relativistic effects.
Gauge Invariance of Thermal Transport Coefficients
Ercole, Loris; Marcolongo, Aris; Umari, Paolo; Baroni, Stefano
2016-10-01
Thermal transport coefficients are independent of the specific microscopic expression for the energy density and current from which they can be derived through the Green-Kubo formula. We discuss this independence in terms of a kind of gauge invariance resulting from energy conservation and extensivity, and demonstrate it numerically for a Lennard-Jones fluid, where different forms of the microscopic energy density lead to different time correlation functions for the heat flux, all of them, however, resulting in the same value for the thermal conductivity.
Transport coefficients of He+ ions in helium
Johnsen, Rainer; Viehland, Larry; Gray, Benjamin; Wright, Timothy
2016-09-01
New experimental mobilities of 4He+ in 4He at 298.7 K, as a function of E/N, have been determined. Uncertainties in the mobilities were reduced to about 1% by using a shuttered drift tube. Comparison with previously measured values show that only one set of previous data is reliable. We demonstrate that the mobilities and diffusion coeffcients of 4He+ in 4He can be calculated over wide ranges of E/N with high precision if accurate potential energy curves are available for the X2Σu+ and A2Σg+ states, and if one takes into account resonant charge transfer and corrects for quantum-mechanical effects. Potentials, obtained by extrapolation of results from d-aug-cc-pVXZ (X =6,7) basis sets using the CASSCF +MRCISD approach were found to be in exceptionally close agreement with the best potentials available (separately) and with experiment, and those were subsequently used in a new computer program to determine semi-classical phase shifts and transport cross sections, from which the gaseous ion transport coefficients are determined. A new set of data for the mobilities of alpha particles (He2+) ions was obtained as a byproduct of the experiment, but the transport theory has not yet been completed.
Calculation of transport coefficients in an axisymmetric plasma
Energy Technology Data Exchange (ETDEWEB)
Shumaker, D.E.
1977-01-01
A method of calculating the transport coefficient in an axisymmetric toroidal plasma is presented. This method is useful in calculating the transport coefficients in a Tokamak plasma confinement device. The particle density and temperature are shown to be a constant on a magnetic flux surface. Transport equations are given for the total particle flux and total energy flux crossing a closed toroidal surface. Also transport equations are given for the toroidal magnetic flux. A computer code was written to calculate the transport coefficients for a three species plasma, electrons and two species of ions. This is useful for calculating the transport coefficients of a plasma which contains impurities. It was found that the particle and energy transport coefficients are increased by a large amount, and the transport coefficients for the toroidal magnetic field are reduced by a small amount.
NGA-West 2 GMPE average site coefficients for use in earthquake-resistant design
Borcherdt, Roger D.
2015-01-01
Site coefficients corresponding to those in tables 11.4–1 and 11.4–2 of Minimum Design Loads for Buildings and Other Structures published by the American Society of Civil Engineers (Standard ASCE/SEI 7-10) are derived from four of the Next Generation Attenuation West2 (NGA-W2) Ground-Motion Prediction Equations (GMPEs). The resulting coefficients are compared with those derived by other researchers and those derived from the NGA-West1 database. The derivation of the NGA-W2 average site coefficients provides a simple procedure to update site coefficients with each update in the Maximum Considered Earthquake Response MCER maps. The simple procedure yields average site coefficients consistent with those derived for site-specific design purposes. The NGA-W2 GMPEs provide simple scale factors to reduce conservatism in current simplified design procedures.
Influence of nonlinear chemical reactions on the transport coefficients in oscillatory Couette flow
Barik, Swarup; Dalal, D. C.
2016-10-01
A multiple-scale method of averaging is applied to the study of transport of a chemical species in oscillatory Couette flow where the species may undergoes a reversible phase exchange with the boundary wall and nonlinear chemical reactions both within the fluid and at the boundary wall. Analytical expressions are obtained for transport coefficients. The results shows how the transport coefficients are influenced by the reversible phase exchange reaction kinetics and the rate and degree of the nonlinear decay chemical reaction.
Symmetry properties of macroscopic transport coefficients in porous media
Lasseux, D.; Valdés-Parada, F. J.
2017-04-01
We report on symmetry properties of tensorial effective transport coefficients characteristic of many transport phenomena in porous systems at the macroscopic scale. The effective coefficients in the macroscopic models (derived by upscaling (volume averaging) the governing equations at the underlying scale) are obtained from the solution of closure problems that allow passing the information from the lower to the upper scale. The symmetry properties of the macroscopic coefficients are identified from a formal analysis of the closure problems and this is illustrated for several different physical mechanisms, namely, one-phase flow in homogeneous porous media involving inertial effects, slip flow in the creeping regime, momentum transport in a fracture relying on the Reynolds model including slip effects, single-phase flow in heterogeneous porous media embedding a porous matrix and a clear fluid region, two-phase momentum transport in homogeneous porous media, as well as dispersive heat and mass transport. The results from the analysis of these study cases are summarized as follows. For inertial single-phase flow, the apparent permeability tensor is irreducibly decomposed into its symmetric (viscous) and skew-symmetric (inertial) parts; for creeping slip-flow, the apparent permeability tensor is not symmetric; for one-phase slightly compressible gas flow in the slip regime within a fracture, the effective transmissivity tensor is symmetric, a result that remains valid in the absence of slip; for creeping one-phase flow in heterogeneous media, the permeability tensor is symmetric; for two-phase flow, we found the dominant permeability tensors to be symmetric, whereas the coupling tensors do not exhibit any special symmetry property; finally for dispersive heat transfer, the thermal conductivity tensors include a symmetric and a skew-symmetric part, the latter being a consequence of convective transport only. A similar result is achieved for mass dispersion. Beyond the
KRIJNEN, WP
1994-01-01
De Vries (1993) discusses Pearson's product-moment correlation, Spearman's rank correlation, and Kendall's rank-correlation coefficient for assessing the association between the rows of two proximity matrices. For each of these he introduces a weighted average variant and a rowwise variant. In this
KRIJNEN, WP
De Vries (1993) discusses Pearson's product-moment correlation, Spearman's rank correlation, and Kendall's rank-correlation coefficient for assessing the association between the rows of two proximity matrices. For each of these he introduces a weighted average variant and a rowwise variant. In this
Choosing the best index for the average score intraclass correlation coefficient.
Shieh, Gwowen
2016-09-01
The intraclass correlation coefficient (ICC)(2) index from a one-way random effects model is widely used to describe the reliability of mean ratings in behavioral, educational, and psychological research. Despite its apparent utility, the essential property of ICC(2) as a point estimator of the average score intraclass correlation coefficient is seldom mentioned. This article considers several potential measures and compares their performance with ICC(2). Analytical derivations and numerical examinations are presented to assess the bias and mean square error of the alternative estimators. The results suggest that more advantageous indices can be recommended over ICC(2) for their theoretical implication and computational ease.
Transport coefficients in superfluid neutron stars
Energy Technology Data Exchange (ETDEWEB)
Tolos, Laura [Instituto de Ciencias del Espacio (IEEC/CSIC) Campus Universitat Autònoma de Barcelona, Facultat de Ciències, Torre C5, E-08193 Bellaterra (Barcelona) (Spain); Frankfurt Institute for Advances Studies. Johann Wolfgang Goethe University, Ruth-Moufang-Str. 1, 60438 Frankfurt am Main (Germany); Manuel, Cristina [Instituto de Ciencias del Espacio (IEEC/CSIC) Campus Universitat Autònoma de Barcelona, Facultat de Ciències, Torre C5, E-08193 Bellaterra (Barcelona) (Spain); Sarkar, Sreemoyee [Tata Institute of Fundamental Research, Homi Bhaba Road, Mumbai-400005 (India); Tarrus, Jaume [Physik Department, Technische Universität München, D-85748 Garching (Germany)
2016-01-22
We study the shear and bulk viscosity coefficients as well as the thermal conductivity as arising from the collisions among phonons in superfluid neutron stars. We use effective field theory techniques to extract the allowed phonon collisional processes, written as a function of the equation of state and the gap of the system. The shear viscosity due to phonon scattering is compared to calculations of that coming from electron collisions. We also comment on the possible consequences for r-mode damping in superfluid neutron stars. Moreover, we find that phonon collisions give the leading contribution to the bulk viscosities in the core of the neutron stars. We finally obtain a temperature-independent thermal conductivity from phonon collisions and compare it with the electron-muon thermal conductivity in superfluid neutron stars.
Transport coefficients in superfluid neutron stars
Tolos, Laura; Sarkar, Sreemoyee; Tarrus, Jaume
2014-01-01
We study the shear and bulk viscosity coefficients as well as the thermal conductivity as arising from the collisions among phonons in superfluid neutron stars. We use effective field theory techniques to extract the allowed phonon collisional processes, written as a function of the equation of state and the gap of the system. The shear viscosity due to phonon scattering is compared to calculations of that coming from electron collisions. We also comment on the possible consequences for r-mode damping in superfluid neutron stars. Moreover, we find that phonon collisions give the leading contribution to the bulk viscosities in the core of the neutron stars. We finally obtain a temperature-independent thermal conductivity from phonon collisions and compare it with the electron-muon thermal conductivity in superfluid neutron stars.
Study of the average heat transfer coefficient at different distances between wind tunnel models
Gnyrya, A.; Korobkov, S.; Mokshin, D.; Koshin, A.
2015-01-01
The paper presents investigations of physical and climatic factors with regard to design and process variables having effect on heat transfer in the building model system at different distances between them in the airflow direction. The aim of this work is to improve energy efficiency of exterior walls of buildings. A method of physical simulation was used in experiments. Experimental results on the average values of the heat transfer coefficient in the building model system are presented herein. A series of experiments was carried out on a specific aerodynamic test bench including a subsonic wind tunnel, heat models and devices for giving thermal boundary conditions, transducers, and the record system equipment. The paper contains diagrams of the average heat transfer distribution at fixed Reynolds number and the airflow angle of attack; the average values of the heat transfer coefficient for each face and wind tunnel models as a whole at maximum, medium, and large distances between them. Intensification of the average heat transfer was observed on the downstream model faces depending on the distance between models.
Anderson-Witting transport coefficients for flows in general relativity
Ambrus, Victor E
2016-01-01
The transport coefficients induced by the Anderson-Witting approximation of the collision term in the relativistic Boltzmann equation are derived for close to equilibrium flows in general relativity. Using the tetrad formalism, it is shown that the expression for these coefficients is the same as that obtained on flat space-time, in agreement with the generalized equivalence principle.
Self-Excited Vibrations in Turning: Efforts Torsor and Average Friction Coefficient Analysis
Gérard, Alain; Zapciu, Miron
2009-01-01
An experimental device in turning including, in particular, a six-component dynamometer is exploited to measure the complete torque of cutting forces in a case of self-excited vibrations. For the tests, the tool used is type TNMA 16 04 12 carbide not covered (nuance carbide-SUMITIMO ELECTRIC), without chip breeze. The machined material is an alloy of chrome molybdenum type 42 CrMo24. The test-tubes are cylindrical with a diameter of 120 mm and a length of 30 mm. The effort of analysis relates to the moments. In particular, to the tool tip point, when feed rate increases the friction coefficient of swivelling is increasing while that of bearing is decreasing. Innovative remarks on the evolution of the average friction coefficient for various depths of cut and feed rate are presented
Anomaly induced transport coefficients, from weak to strong coupling
Pena-Benitez, Francisco
2013-01-01
The existence of new transport phenomena associated to the presence of quantum anomalies has atracted very recently the attention of theorist. These transport coefficient have very interesting properties, for example, they do not renormalize. The most famous case of anomaly induced transport phenomena is the Chiral Magnetic Effect, in which an electric current is produced by a magnetic field if the system has a different number of right handed fermions respect the left handed one. In this thesis we have studied those transport coefficients from Kubo formulas at weak and strong coupling. To finish a fluid/gravity approach is used to compute all the second order anomalous coefficients in an anomalous conformal fluid.
Energy Technology Data Exchange (ETDEWEB)
Beidler, C. D. [Max-Planck-Institute for Plasmaphysik, EURATOM-Association, Greifswald, Germany; Allmaier, K. [Insitut fur Theoretische Physik, Association EURATOM, Graz, Austria; Isaev, Maxim Yu [Kurchatov Institute, Moscow, Russia; Kasilov, K. [Insitute of Plasma Physics, NSC-KhIPT, Kharkov, Ukraine; Kernbichler, W. [Insitut fur Theoretische Physik, Association EURATOM, Graz, Austria; Leitold, G. [Insitut fur Theoretische Physik, Association EURATOM, Graz, Austria; Maassberg, H. [Max-Planck-Institute for Plasmaphysik, EURATOM-Association, Greifswald, Germany; Mikkelsen, D. R. [Princeton Plasma Physics Laboratory (PPPL); Murakami, Masanori [ORNL; Schmidt, M. [Max-Planck-Institute for Plasmaphysik, EURATOM-Association, Greifswald, Germany; Spong, Donald A [ORNL; Tribaidos, V. [Universidad Carlos III, Madrid, Spain; Wakasa, A. [Kyoto University, Kyoto, Japan
2011-01-01
Numerical results for the three mono-energetic transport coefficients required for a complete neoclassical description of stellarator plasmas have been benchmarked within an international collaboration. These transport coefficients are flux-surface-averaged moments of solutions to the linearized drift kinetic equation which have been determined using field-line-integration techniques, Monte Carlo simulations, a variational method employing Fourier-Legendre test functions and a finite-difference scheme. The benchmarking has been successfully carried out for past, present and future devices which represent different optimization strategies within the extensive configuration space available to stellarators. A qualitative comparison of the results with theoretical expectations for simple model fields is provided. The behaviour of the results for the mono-energetic radial and parallel transport coefficients can be largely understood from such theoretical considerations but the mono-energetic bootstrap current coefficient exhibits characteristics which have not been predicted.
3D contaminant migration model with consolidation dependent transport coefficients
Institute of Scientific and Technical Information of China (English)
Lu Huang; Cheng-Gang Zhao; Yan Liu; Guo-Qing Cai
2012-01-01
Soil consolidation would induce variations of its transport coefficients such as hydraulic conductivity and diffusion coefficient. This paper presents a study of the influence of barrier consolidation on transport coefficients,and a 3D transport model based on mixture theory is proposed for describing the liners that involve circular defects in the geomembrane.The elastoplastic ALPHA model is revised by using the spatially mobilized plane (SMP) criterion for simulating the deformation of the soils.Then,the 3D model coupling the nonlinear consolidation and contaminant advection-diffusion is solved using the finite element software ABAQUS.The results show that the importance of reducing the defect size in the geomembrane and the liner porosity to control the contaminant concentration increase.
Molecular Dynamics Simulation on thermodynamic Properties and Transport Coefficients
Institute of Scientific and Technical Information of China (English)
D.X.Xiong
1996-01-01
Moecular dynamics simulation (MDS) is used to study the thermodynamic properties and transport coefficients of an argon system with Lennend-Jones potential.The results on the velocity distribution,mean free path,mean collison time,specific heat and self0diffusion coefficient agree well with the existing theoretical /experimental data,It shows that molecular dynamics method is another bridge to connect microworld and macreoworld.
Memory Effects and Transport Coefficients for Non-Newtonian Fluids
Kodama, T
2008-01-01
We discuss the roles of viscosity in relativistic fluid dynamics from the point of view of memory effects. Depending on the type of quantity to which the memory effect is applied, different terms appear in higher order corrections. We show that when the memory effect applies on the extensive quantities, the hydrodynamic equations of motion become non-singular. We further discuss the question of memory effect in the derivation of transport coefficients from a microscopic theory. We generalize the application of the Green-Kubo-Nakano (GKN) to calculate transport coefficients in the framework of projection operator formalism, and derive the general formula when the fluid is non-Newtonian.
Energy Technology Data Exchange (ETDEWEB)
Hagelaar, G J M; Pitchford, L C [Centre de Physique des Plasmas et de leurs Applications de Toulouse, Universite Paul Sabatier, 118 route de Narbonne, 31062 Toulouse Cedex 9 (France)
2005-11-15
Fluid models of gas discharges require the input of transport coefficients and rate coefficients that depend on the electron energy distribution function. Such coefficients are usually calculated from collision cross-section data by solving the electron Boltzmann equation (BE). In this paper we present a new user-friendly BE solver developed especially for this purpose, freely available under the name BOLSIG+, which is more general and easier to use than most other BE solvers available. The solver provides steady-state solutions of the BE for electrons in a uniform electric field, using the classical two-term expansion, and is able to account for different growth models, quasi-stationary and oscillating fields, electron-neutral collisions and electron-electron collisions. We show that for the approximations we use, the BE takes the form of a convection-diffusion continuity-equation with a non-local source term in energy space. To solve this equation we use an exponential scheme commonly used for convection-diffusion problems. The calculated electron transport coefficients and rate coefficients are defined so as to ensure maximum consistency with the fluid equations. We discuss how these coefficients are best used in fluid models and illustrate the influence of some essential parameters and approximations.
Generalized transport coefficients for inelastic Maxwell mixtures under shear flow
Garzó, Vicente; Trizac, Emmanuel
2015-11-01
The Boltzmann equation framework for inelastic Maxwell models is considered to determine the transport coefficients associated with the mass, momentum, and heat fluxes of a granular binary mixture in spatially inhomogeneous states close to the simple shear flow. The Boltzmann equation is solved by means of a Chapman-Enskog-type expansion around the (local) shear flow distributions fr(0 ) for each species that retain all the hydrodynamic orders in the shear rate. Due to the anisotropy induced by the shear flow, tensorial quantities are required to describe the transport processes instead of the conventional scalar coefficients. These tensors are given in terms of the solutions of a set of coupled equations, which can be analytically solved as functions of the shear rate a , the coefficients of restitution αr s, and the parameters of the mixture (masses, diameters, and composition). Since the reference distribution functions fr(0 ) apply for arbitrary values of the shear rate and are not restricted to weak dissipation, the corresponding generalized coefficients turn out to be nonlinear functions of both a and αr s. The dependence of the relevant elements of the three diffusion tensors on both the shear rate and dissipation is illustrated in the tracer limit case, the results showing that the deviation of the generalized transport coefficients from their forms for vanishing shear rates is in general significant. A comparison with the previous results obtained analytically for inelastic hard spheres by using Grad's moment method is carried out, showing a good agreement over a wide range of values for the coefficients of restitution. Finally, as an application of the theoretical expressions derived here for the transport coefficients, thermal diffusion segregation of an intruder immersed in a granular gas is also studied.
Spatially-Averaged Diffusivities for Pollutant Transport in Vegetated Flows
Huang, Jun; Zhang, Xiaofeng; Chua, Vivien P.
2016-06-01
Vegetation in wetlands can create complicated flow patterns and may provide many environmental benefits including water purification, flood protection and shoreline stabilization. The interaction between vegetation and flow has significant impacts on the transport of pollutants, nutrients and sediments. In this paper, we investigate pollutant transport in vegetated flows using the Delft3D-FLOW hydrodynamic software. The model simulates the transport of pollutants with the continuous release of a passive tracer at mid-depth and mid-width in the region where the flow is fully developed. The theoretical Gaussian plume profile is fitted to experimental data, and the lateral and vertical diffusivities are computed using the least squares method. In previous tracer studies conducted in the laboratory, the measurements were obtained at a single cross-section as experimental data is typically collected at one location. These diffusivities are then used to represent spatially-averaged values. With the numerical model, sensitivity analysis of lateral and vertical diffusivities along the longitudinal direction was performed at 8 cross-sections. Our results show that the lateral and vertical diffusivities increase with longitudinal distance from the injection point, due to the larger size of the dye cloud further downstream. A new method is proposed to compute diffusivities using a global minimum least squares method, which provides a more reliable estimate than the values obtained using the conventional method.
Kabala, Z. J.
1997-08-01
Under the assumption that local solute dispersion is negligible, a new general formula (in the form of a convolution integral) is found for the arbitrary k-point ensemble moment of the local concentration of a solute convected in arbitrary m spatial dimensions with general sure initial conditions. From this general formula new closed-form solutions in m=2 spatial dimensions are derived for 2-point ensemble moments of the local solute concentration for the impulse (Dirac delta) and Gaussian initial conditions. When integrated over an averaging window, these solutions lead to new closed-form expressions for the first two ensemble moments of the volume-averaged solute concentration and to the corresponding concentration coefficients of variation (CV). Also, for the impulse (Dirac delta) solute concentration initial condition, the second ensemble moment of the solute point concentration in two spatial dimensions and the corresponding CV are demonstrated to be unbound. For impulse initial conditions the CVs for volume-averaged concentrations axe compared with each other for a tracer from the Borden aquifer experiment. The point-concentration CV is unacceptably large in the whole domain, implying that the ensemble mean concentration is inappropriate for predicting the actual concentration values. The volume-averaged concentration CV decreases significantly with an increasing averaging volume. Since local dispersion is neglected, the new solutions should be interpreted as upper limits for the yet to be derived solutions that account for local dispersion; and so should the presented CVs for Borden tracers. The new analytical solutions may be used to test the accuracy of Monte Carlo simulations or other numerical algorithms that deal with the stochastic solute transport. They may also be used to determine the size of the averaging volume needed to make a quasi-sure statement about the solute mass contained in it.
Electromagnetic fields and transport coefficients in a hot pion gas
Energy Technology Data Exchange (ETDEWEB)
Gomez Nicola, A. [Departamentos de Fisica Teorica I, II, Universidad Complutense, 28040 Madrid (Spain); Fernandez-Fraile, D. [Departamentos de Fisica Teorica I, II, Universidad Complutense, 28040 Madrid (Spain)
2007-03-15
We present recent results on finite temperature electromagnetic form factors and the electrical conductivity in a pion gas. The standard Chiral Perturbation Theory power counting needs to be modified for transport coefficients. We pay special attention to unitarity and to possible applications for dilepton and photon production.
Transport coefficients for rigid spherically symmetric polymers or aggregates
Strating, P.; Wiegel, F.W.
1994-01-01
In this paper we investigate the transport properties for rigid spherically symmetric macromolecules, having a segment density distribution falling off as r- lambda . We calculate the rotational and translational diffusion coefficient for a spherically symmetric polymer and the shear viscosity for a
Turbulent MHD transport coefficients - An attempt at self-consistency
Chen, H.; Montgomery, D.
1987-01-01
In this paper, some multiple scale perturbation calculations of turbulent MHD transport coefficients begun in earlier papers are first completed. These generalize 'alpha effect' calculations by treating the velocity field and magnetic field on the same footing. Then the problem of rendering such calculations self-consistent is addressed, generalizing an eddy-viscosity hypothesis similar to that of Heisenberg for the Navier-Stokes case. The method also borrows from Kraichnan's direct interaction approximation. The output is a set of integral equations relating the spectra and the turbulent transport coefficients. Previous 'alpha effect' and 'beta effect' coefficients emerge as limiting cases. A treatment of the inertial range can also be given, consistent with a -5/3 energy spectrum power law. In the Navier-Stokes limit, a value of 1.72 is extracted for the Kolmogorov constant. Further applications to MHD are possible.
Towards the continuum limit in transport coefficient computations
Francis, A; Laine, M; Müller, M; Neuhaus, T; Ohno, H
2013-01-01
The analytic continuation needed for the extraction of transport coefficients necessitates in principle a continuous function of the Euclidean time variable. We report on progress towards achieving the continuum limit for 2-point correlator measurements in thermal SU(3) gauge theory, with specific attention paid to scale setting. In particular, we improve upon the determination of the critical lattice coupling and the critical temperature of pure SU(3) gauge theory, estimating r0*Tc ~ 0.7470(7) after a continuum extrapolation. As an application the determination of the heavy quark momentum diffusion coefficient from a correlator of colour-electric fields attached to a Polyakov loop is discussed.
Measurement of particle transport coefficients on Alcator C-Mod
Energy Technology Data Exchange (ETDEWEB)
Luke, T.C.T.
1994-10-01
The goal of this thesis was to study the behavior of the plasma transport during the divertor detachment in order to explain the central electron density rise. The measurement of particle transport coefficients requires sophisticated diagnostic tools. A two color interferometer system was developed and installed on Alcator C-Mod to measure the electron density with high spatial ({approx} 2 cm) and high temporal ({le} 1.0 ms) resolution. The system consists of 10 CO{sub 2} (10.6 {mu}m) and 4 HeNe (.6328 {mu}m) chords that are used to measure the line integrated density to within 0.08 CO{sub 2} degrees or 2.3 {times} 10{sup 16}m{sup {minus}2} theoretically. Using the two color interferometer, a series of gas puffing experiments were conducted. The density was varied above and below the threshold density for detachment at a constant magnetic field and plasma current. Using a gas modulation technique, the particle diffusion, D, and the convective velocity, V, were determined. Profiles were inverted using a SVD inversion and the transport coefficients were extracted with a time regression analysis and a transport simulation analysis. Results from each analysis were in good agreement. Measured profiles of the coefficients increased with the radius and the values were consistent with measurements from other experiments. The values exceeded neoclassical predictions by a factor of 10. The profiles also exhibited an inverse dependence with plasma density. The scaling of both attached and detached plasmas agreed well with this inverse scaling. This result and the lack of change in the energy and impurity transport indicate that there was no change in the underlying transport processes after detachment.
Relativistic quantum transport coefficients for second-order viscous hydrodynamics
Florkowski, Wojciech; Maksymiuk, Ewa; Ryblewski, Radoslaw; Strickland, Michael
2015-01-01
We express the transport coefficients appearing in the second-order evolution equations for bulk viscous pressure and shear stress tensor using Bose-Einstein, Boltzmann, and Fermi-Dirac statistics for the equilibrium distribution function and Grad's 14-moment approximation as well as the method of Chapman-Enskog expansion for the non-equilibrium part. Specializing to the case of boost-invariant and transversally homogeneous longitudinal expansion of the viscous medium, we compare the results obtained using the above methods with those obtained from the exact solution of massive 0+1d Boltzmann equation in the relaxation-time approximation. We show that compared to the 14-moment approximation, the hydrodynamic transport coefficients obtained using the Chapman-Enskog method result in better agreement with the exact solution of the Boltzmann equation in relaxation-time approximation.
Behavior of the particle transport coefficients near the density limit in MTX
Energy Technology Data Exchange (ETDEWEB)
Marinak, M.M.
1993-04-01
The perturbed particle transport coefficients were determined for a range of plasma conditions in the Alcator C tokamak, a component of the Microwave Tokamak Experiment (MTX), from analysis of density perturbations created in gas modulation experiments. Density measurements from a 15 chord far-infrared interferometer were sufficiently detailed to allow radial profiles of the transport coefficients to be resolved. Gas modulation experiments were carried out on plasmas over a range of relatively low currents and a wide variety of line-averaged densities, including values near the Greenwald density limit. With this technique the perturbed diffusion coefficient D and the perturbed convection velocity V can be determined simultaneously. Measured profiles of D rise toward the outside of the plasma column in a manner generally similar to those determined previously for {chi}{sub e,HP} from sawtooth heat pulse propagation. Values of D are typically smaller than those of {chi}{sub e,HP} given for the same line-averaged densities by a factor of 2-5. Diffusion coefficients from a series of discharges at constant current showed little variation with density through most of the saturated ohmic confinement regime. At the Greenwald density limit threshold a dramatic increase occurred in both the perturbed convective and diffusive transport coefficients in the outer region of the plasma. The increases were most pronounced at the outermost range of the radii where coefficients were determined (r/a = 0.8), but were apparent over a region which extended well into the plasma interior. Density profiles maintained a similar shape near the density limit, congruous with the similar behavior of the transport coefficients. No dramatic deterioration was evident in the global energy confinement.
The Determinants of Gini Coefficient in Iran Based on Bayesian Model Averaging
Mohsen Mehrara; Mojtaba Mohammadian
2015-01-01
This paper has tried to apply BMA approach in order to investigate important influential variables on Gini coefficient in Iran over the period 1976-2010. The results indicate that the GDP growth is the most important variable affecting the Gini coefficient and has a positive influence on it. Also the second and third effective variables on Gini coefficient are respectively the ratio of government current expenditure to GDP and the ratio of oil revenue to GDP which lead to an increase in inequ...
Stochastic method for modeling of the rarefied gas transport coefficients
Rudyak, V. Ya; Lezhnev, E. V.
2016-08-01
In this paper, we propose an algorithm for computation of the transport coefficients of rarefied gas, which is based on stochastic modeling of phase trajectories considered molecular system. The hard spheres potential is used. The number of operations is proportional to the number of used molecules. Naturally in this algorithm the conservation laws are performed. The efficiency of the algorithm is demonstrated by the calculation of the viscosity and diffusion coefficients of several noble gases (argon, neon, xenon, krypton). It was shown that the algorithm accuracy of the order of 1-2% can be obtained by using a relatively small number of molecules. The accuracy dependence on the number of used molecules, statistics (number of the used phase trajectories) and calculation time was analyzed.
Variational transport coefficients for low aspect ratio, low collisionality stellarators
Hirshman, S. P.; Spong, D. A.; D'Azevedo, E.; Peyton, B.; Lawkins, W.
2001-10-01
Stellarators with low aspect ratios (A converged results for these bounds. The convergence of DKES as the number of basis functions is varied is examined for several low aspect ratio configurations corresponding to the proposed NCSX and QPS experiments. It is shown that even on fairly coarse meshes, the minimax extremum yields a good approximation to the final (very fine mesh) values of the transport coefficients. Methods for optimally selecting the basis harmonic components, and hence greatly reducing the computational effort, are described. Iterative solution techniques have been developed which are scaleable to higher dimensional problems that include radial drift orbit effects. These methods are compared with the presently used Thomas algorithm.
The Determinants of Gini Coefficient in Iran Based on Bayesian Model Averaging
Directory of Open Access Journals (Sweden)
Mohsen Mehrara
2015-03-01
Full Text Available This paper has tried to apply BMA approach in order to investigate important influential variables on Gini coefficient in Iran over the period 1976-2010. The results indicate that the GDP growth is the most important variable affecting the Gini coefficient and has a positive influence on it. Also the second and third effective variables on Gini coefficient are respectively the ratio of government current expenditure to GDP and the ratio of oil revenue to GDP which lead to an increase in inequality. This result is corresponding with rentier state theory in Iran economy. Injection of massive oil revenue to Iran's economy and its high share of the state budget leads to inefficient government spending and an increase in rent-seeking activities in the country. Economic growth is possibly a result of oil revenue in Iran economy which has caused inequality in distribution of income.
Geometry of quantum Hall states: Gravitational anomaly and transport coefficients
Energy Technology Data Exchange (ETDEWEB)
Can, Tankut, E-mail: tcan@scgp.stonybrook.edu [Simons Center for Geometry and Physics, Stony Brook University, Stony Brook, NY 11794 (United States); Laskin, Michael; Wiegmann, Paul B. [Department of Physics, University of Chicago, 929 57th St, Chicago, IL 60637 (United States)
2015-11-15
We show that universal transport coefficients of the fractional quantum Hall effect (FQHE) can be understood as a response to variations of spatial geometry. Some transport properties are essentially governed by the gravitational anomaly. We develop a general method to compute correlation functions of FQH states in a curved space, where local transformation properties of these states are examined through local geometric variations. We introduce the notion of a generating functional and relate it to geometric invariant functionals recently studied in geometry. We develop two complementary methods to study the geometry of the FQHE. One method is based on iterating a Ward identity, while the other is based on a field theoretical formulation of the FQHE through a path integral formalism.
Leung, Juliana Y; Srinivasan, Sanjay
2016-09-01
Modeling transport process at large scale requires proper scale-up of subsurface heterogeneity and an understanding of its interaction with the underlying transport mechanisms. A technique based on volume averaging is applied to quantitatively assess the scaling characteristics of effective mass transfer coefficient in heterogeneous reservoir models. The effective mass transfer coefficient represents the combined contribution from diffusion and dispersion to the transport of non-reactive solute particles within a fluid phase. Although treatment of transport problems with the volume averaging technique has been published in the past, application to geological systems exhibiting realistic spatial variability remains a challenge. Previously, the authors developed a new procedure where results from a fine-scale numerical flow simulation reflecting the full physics of the transport process albeit over a sub-volume of the reservoir are integrated with the volume averaging technique to provide effective description of transport properties. The procedure is extended such that spatial averaging is performed at the local-heterogeneity scale. In this paper, the transport of a passive (non-reactive) solute is simulated on multiple reservoir models exhibiting different patterns of heterogeneities, and the scaling behavior of effective mass transfer coefficient (Keff) is examined and compared. One such set of models exhibit power-law (fractal) characteristics, and the variability of dispersion and Keff with scale is in good agreement with analytical expressions described in the literature. This work offers an insight into the impacts of heterogeneity on the scaling of effective transport parameters. A key finding is that spatial heterogeneity models with similar univariate and bivariate statistics may exhibit different scaling characteristics because of the influence of higher order statistics. More mixing is observed in the channelized models with higher-order continuity. It
Leung, Juliana Y.; Srinivasan, Sanjay
2016-09-01
Modeling transport process at large scale requires proper scale-up of subsurface heterogeneity and an understanding of its interaction with the underlying transport mechanisms. A technique based on volume averaging is applied to quantitatively assess the scaling characteristics of effective mass transfer coefficient in heterogeneous reservoir models. The effective mass transfer coefficient represents the combined contribution from diffusion and dispersion to the transport of non-reactive solute particles within a fluid phase. Although treatment of transport problems with the volume averaging technique has been published in the past, application to geological systems exhibiting realistic spatial variability remains a challenge. Previously, the authors developed a new procedure where results from a fine-scale numerical flow simulation reflecting the full physics of the transport process albeit over a sub-volume of the reservoir are integrated with the volume averaging technique to provide effective description of transport properties. The procedure is extended such that spatial averaging is performed at the local-heterogeneity scale. In this paper, the transport of a passive (non-reactive) solute is simulated on multiple reservoir models exhibiting different patterns of heterogeneities, and the scaling behavior of effective mass transfer coefficient (Keff) is examined and compared. One such set of models exhibit power-law (fractal) characteristics, and the variability of dispersion and Keff with scale is in good agreement with analytical expressions described in the literature. This work offers an insight into the impacts of heterogeneity on the scaling of effective transport parameters. A key finding is that spatial heterogeneity models with similar univariate and bivariate statistics may exhibit different scaling characteristics because of the influence of higher order statistics. More mixing is observed in the channelized models with higher-order continuity. It
Pharoah, J. G.; Karan, K.; Sun, W.
This paper reviews the approach taken in the literature to model the effective transport coefficients - mass diffusivity, electrical conductivity, thermal conductivity and hydraulic permeability - of carbon-fibre based porous electrode of polymer electrolyte membrane fuel cells (PEMFCs). It is concluded that current PEMFC model do not account for the inherent anisotropic microstructure of the fibrous electrodes. Simulations using a 2-D PEMFC cathode model show that neglecting the anisotropic nature and associated transport coefficients of the porous electrodes significantly influences both the nature and the magnitude of the model predictions. This emphasizes the need to appropriately characterize the relevant anisotropic properties of the fibrous electrode.
Energy Technology Data Exchange (ETDEWEB)
Samet Y. Kadioglu; Robert R. Nourgaliev; Vincent A. Mousseau
2008-03-01
We perform a comparative study for the harmonic versus arithmetic averaging of the heat conduction coefficient when solving non-linear heat transfer problems. In literature, the harmonic average is the method of choice, because it is widely believed that the harmonic average is more accurate model. However, our analysis reveals that this is not necessarily true. For instance, we show a case in which the harmonic average is less accurate when a coarser mesh is used. More importantly, we demonstrated that if the boundary layers are finely resolved, then the harmonic and arithmetic averaging techniques are identical in the truncation error sense. Our analysis further reveals that the accuracy of these two techniques depends on how the physical problem is modeled.
Transport coefficients from the boson Uehling-Uhlenbeck equation.
Gust, Erich D; Reichl, L E
2013-04-01
Expressions for the bulk viscosity, shear viscosity, and thermal conductivity of a quantum degenerate Bose gas above the critical temperature for Bose-Einstein condensation are derived using the Uehling-Uhlenbeck kinetic equation. For contact potentials and hard sphere interactions, the eigenvalues (relaxation rates) of the Uehling-Uhlenbeck collision operator have an upper cutoff. This cutoff requires summation over all discrete eigenvalues and eigenvectors of the collision operator when computing transport coefficients. We numerically compute the shear viscosity and thermal conductivity for any boson gas that interacts via a contact potential. We find that the bulk viscosity of the degenerate boson gas remains identically zero, as it is for the classical gas.
The average acceleration approach applied to gravity coefficients recovery based on GOCE orbits
Directory of Open Access Journals (Sweden)
Huang Qiang
2012-11-01
Full Text Available The average acceleration approach was applied to recover a gravity field model Model_ACA from GOCE precise science orbits from September 2 to November 2, 2010, and furthermore a so called sequential least square adjustment was used. The model was compared with other gravity field models based on CHAMP, GRACE and GOCE. The result shows that the model is superior to gravity field based on CHAMP, and with higher accuracy than other international gravity field models based on only GOCE data before 80 degree. The degree geoid height of Model_ACA reaches 3 cm up to 90 degree and order.
Energy Technology Data Exchange (ETDEWEB)
Kim, Jin Sub; An, Seok Chan; Ko, Tae Kuk [Yonsei University, Seoul (Korea, Republic of); Chu, Yong [National Fusion Research Institute(NFRI), Daejeon (Korea, Republic of)
2016-09-15
A quench detection system of KSTAR Poloidal Field (PF) coils is inevitable for stable operation because normal zone generates overheating during quench occurrence. Recently, new voltage quench detection method, combination of Central Difference Averaging (CDA) and Mutual Inductance Compensation (MIK) for compensating mutual inductive voltage more effectively than conventional voltage detection method, has been suggested and studied. For better performance of mutual induction cancellation by adjacent coils of CDA+MIK method for KSTAR coil system, balance coefficients of CDA must be estimated and adjusted preferentially. In this paper, the balance coefficients of CDA for KSTAR PF coils were numerically estimated. The estimated result was adopted and tested by using simulation. The CDA method adopting balance coefficients effectively eliminated mutual inductive voltage, and also it is expected to improve performance of CDA+MIK method for quench detection of KSTAR PF coils.
Analytic continuation average spectrum method for transport in quantum liquids
Energy Technology Data Exchange (ETDEWEB)
Kletenik-Edelman, Orly [School of Chemistry, Sackler Faculty of Exact Sciences, Tel Aviv University, Tel Aviv 69978 (Israel); Rabani, Eran, E-mail: rabani@tau.ac.il [School of Chemistry, Sackler Faculty of Exact Sciences, Tel Aviv University, Tel Aviv 69978 (Israel); Reichman, David R. [Department of Chemistry, Columbia University, 3000 Broadway, New York, NY 10027 (United States)
2010-05-12
Recently, we have applied the analytic continuation averaged spectrum method (ASM) to calculate collective density fluctuations in quantum liquid . Unlike the maximum entropy (MaxEnt) method, the ASM approach is capable of revealing resolved modes in the dynamic structure factor in agreement with experiments. In this work we further develop the ASM to study single-particle dynamics in quantum liquids with dynamical susceptibilities that are characterized by a smooth spectrum. Surprisingly, we find that for the power spectrum of the velocity autocorrelation function there are pronounced differences in comparison with the MaxEnt approach, even for this simple case of smooth unimodal dynamic response. We show that for liquid para-hydrogen the ASM is closer to the centroid molecular dynamics (CMD) result while for normal liquid helium it agrees better with the quantum mode coupling theory (QMCT) and with the MaxEnt approach.
Institute of Scientific and Technical Information of China (English)
LI Chunxiang; ZHOU Dai
2004-01-01
The polynomial matrix using the block coefficient matrix representation auto-regressive moving average (referred to as the PM-ARMA) model is constructed in this paper for actively controlled multi-degree-of-freedom (MDOF) structures with time-delay through equivalently transforming the preliminary state space realization into the new state space realization. The PM-ARMA model is a more general formulation with respect to the polynomial using the coefficient representation auto-regressive moving average (ARMA) model due to its capability to cope with actively controlled structures with any given structural degrees of freedom and any chosen number of sensors and actuators. (The sensors and actuators are required to maintain the identical number.) under any dimensional stationary stochastic excitation.
Energy Technology Data Exchange (ETDEWEB)
Oka, Kiyoshi; Yakushiji, Toshitake; Sato, Hiro; Mizuta, Hiroshi [Kumamoto University, Department of Orthopaedic and Neuro-Musculoskeletal Surgery, Faculty of Medical and Pharmaceutical Sciences, Kumamoto (Japan); Hirai, Toshinori; Yamashita, Yasuyuki [Kumamoto University, Department of Diagnostic Radiology, Graduate School of Medical and Pharmaceutical Sciences, Kumamoto (Japan)
2010-02-15
The objective of this study was to evaluate whether the average apparent diffusion coefficient (ADC) or the minimum ADC is more useful for evaluating the chemotherapeutic response of osteosarcoma. Twenty-two patients with osteosarcoma were examined in this study. Diffusion-weighted (DW) and magnetic resonance (MR) images were performed for all patients before and after chemotherapy. The pre- and post-chemotherapy values were obtained both in the average and minimum ADC. The pre-chemotherapy values of the average ADC and minimum ADC respectively were compared with the post-chemotherapy values. In addition, the ADC ratios ([ADC{sub post} - ADC{sub pre}] / ADC{sub pre}) were calculated using the average ADC and the minimum ADC. Twenty-two patients with osteosarcomas were divided into two groups, those with a good response to chemotherapy ({>=} 90% tumor necrosis, n = 7) and those with a poor response (< 90% tumor necrosis, n = 15). The average ADC ratio and the minimum ADC ratio of the two groups were compared. With both the average ADC and the minimum ADC, post-chemotherapy values were significantly higher than pre-chemotherapy values (P < 0.05). The patients with a good response had a significantly higher minimum ADC ratio than those with a poor response (1.01 {+-} 0.22 and 0.55 {+-} 0.29 respectively, P < 0.05). However, with regard to the average ADC ratio, no significant difference was observed between the two groups (0.66 {+-} 0.18 and 0.46 {+-} 0.31 respectively, P = 0.19). The minimum ADC is useful for evaluating the chemotherapeutic response of osteosarcoma. (orig.)
Line photon transport in a non-homogeneous plasma using radiative coupling coefficients
Energy Technology Data Exchange (ETDEWEB)
Florido, R.; Gil, J.M.; Rodriguez, R.; Rubiano, J.G.; Martel, P. [Las Palmas de Gran Canaria Univ., Dept. de Fisica (Spain); Florido, R.; Gil, J.M.; Rodriguez, R.; Rubiano, J.G.; Martel, P.; Minguez, E. [Madrid Univ. Politecnica, Instituto de Fusion Nuclear-DENIM (Spain)
2006-06-15
We present a steady-state collisional-radiative model for the calculation of level populations in non-homogeneous plasmas with planar geometry. The line photon transport is taken into account following an angle- and frequency-averaged escape probability model. Several models where the same approach has been used can be found in the literature, but the main difference between our model and those ones is that the details of geometry are exactly treated in the definition of coupling coefficients and a local profile is taken into account in each plasma cell. (authors)
1D compressible flow with temperature dependent transport coefficients
Jenssen, Helge Kristian
2009-01-01
We establish existence of global-in-time weak solutions to the one dimensional, compressible Navier-Stokes system for a viscous and heat conducting ideal polytropic gas (pressure $p=K\\theta/\\tau$, internal energy $e=c_v \\theta$), when the viscosity $\\mu$ is constant and the heat conductivity $\\kappa$ depends on the temperature $\\theta$ according to $\\kappa(\\theta) = \\bar \\kappa \\theta^\\beta$, with $0\\leq\\beta<{3/2}$. This choice of degenerate transport coefficients is motivated by the kinetic theory of gasses. Approximate solutions are generated by a semi-discrete finite element scheme. We first formulate sufficient conditions that guarantee convergence to a weak solution. The convergence proof relies on weak compactness and convexity, and it applies to the more general constitutive relations $\\mu(\\theta) = \\bar \\mu \\theta^\\alpha$, $\\kappa(\\theta) = \\bar \\kappa \\theta^\\beta$, with $\\alpha\\geq 0$, $0 \\leq \\beta < 2$ ($\\bar \\mu, \\bar \\kappa$ constants). We then verify the sufficient conditions in the case...
Transport Coefficients at Zero Temperature from Extremal Black Holes
Edalati, Mohammad; Leigh, Robert G
2009-01-01
Using the AdS/CFT correspondence we study transport coefficients of a strongly-coupled (2 +1)-dimensional boundary field theory at zero temperature and finite charge density. The boundary field theory under consideration is dual to the extremal Reissner-Nordstrom AdS(4) black hole in the bulk. We show that, like the cases of scalar and spinor operators studied in arXiv:0907.2694 [hep-th], the correlators of charge (vector) current and energy-momentum (tensor) operators exhibit scaling behavior at low frequency. The existence of such low frequency behavior is related to the fact that the near-horizon geometry of the extremal black hole background has an AdS(2) factor. We carefully calculate the shear viscosity (at zero temperature) and show that the ratio of the shear viscosity to the entropy density takes the value of 1/4\\pi. Because of the AdS(2) factor, we argue that this result stays the same for all d-dimensional boundary field theories dual to the extremal Reissner-Nordstrom AdS(d+1) black holes. Also, w...
Spectral functions and transport coefficients from the functional renormalization group
Energy Technology Data Exchange (ETDEWEB)
Tripolt, Ralf-Arno
2015-06-03
In this thesis we present a new method to obtain real-time quantities like spectral functions and transport coefficients at finite temperature and density using the Functional Renormalization Group approach. Our non-perturbative method is thermodynamically consistent, symmetry preserving and based on an analytic continuation from imaginary to real time on the level of the flow equations. We demonstrate the applicability of this method by calculating mesonic spectral functions as well as the shear viscosity for the quark-meson model. In particular, results are presented for the pion and sigma spectral function at finite temperature and chemical potential, with a focus on the regime near the critical endpoint in the phase diagram of the quark-meson model. Moreover, the different time-like and space-like processes, which give rise to a complex structure of the spectral functions, are discussed. Finally, based on the momentum dependence of the spectral functions, we calculate the shear viscosity and the shear viscosity to entropy density ratio using the corresponding Green-Kubo formula.
Sawczuk, Wojciech
2017-06-01
Due to their wide range of friction characteristics resulting from the application of different friction materials and good heat dissipation conditions, railway disc brakes have long replaced block brakes in many rail vehicles. A block brake still remains in use, however, in low speed cargo trains. The paper presents the assessment of the braking process through the analysis of vibrations generated by the components of the brake system during braking. It presents a possibility of a wider application of vibroacoustic diagnostics (VA), which aside from the assessment of technical conditions (wear of brake pads) also enables the determination of the changes of the average friction coefficient as a function of the braking onset speed. Vibration signals of XYZ were measured and analyzed. The analysis of the results has shown that there is a relation between the values of the point measures and the wear of the brake pads.
DEPTH-AVERAGE ANALYSIS OF HYSTERESIS BETWEEN FLOW AND SEDIMENT TRANSPORT UNDER UNSTEADY CONDITIONS
Institute of Scientific and Technical Information of China (English)
Weiming WU; Mustafa ALTINAKAR; Sam S.Y.WANG
2006-01-01
A depth-averaged two-dimensional model has been established to simulate unsteady flow and sediment transport in streams. The difference in flow and sediment velocities is considered. It has been found that the depth-averaged suspended-sediment velocity and the bed-load velocity are smaller than the depth-averaged flow velocity, inducing a time lag between water and sediment transport. The significance of this time lag increases as the sediment size increases. The exchange between the moving sediment and the bed material, which may induce a spatial lag, is modeled by a non-equilibrium transport approach. Tests using laboratory and field measurements have shown that the established model is capable of capturing the hysteresis between flow and sediment transport under unsteady conditions. It is demonstrated that the hysteresis is larger when the hydrograph has steeper rising and falling limbs, and the time delay increases downstream.
DEPTH-AVERAGED 2-D CALCULATION OF FLOW AND SEDIMENT TRANSPORT IN CURVED CHANNELS
Institute of Scientific and Technical Information of China (English)
Weiming WU; Sam S. Y. WANG
2004-01-01
The helical flow significantly affects the flow, sediment transport and morphological evolution in curved channels. A semi-empirical formula is proposed to determine the cross-stream distribution of the helical flow intensity in the developed regions of a channel bend. It is then used to evaluate the dispersion terms in the depth-averaged 2-D momentum equations and suspended-load transport equation as well as the bed-load transport angle, thus enhancing the depth-averaged 2-D model to account for the effect of helical flow. The tests in several experimental and field cases show that the enhanced depth-averaged 2-D model can much more reasonably predict the shifting of main flow from inner bank to outer bank, the erosion along outer bank and deposition along inner bank than the depth-averaged 2-D model without considering this effect.
Hydrodynamic transport coefficients for the non-conformal quark-gluon plasma from holography
Finazzo, Stefano I; Marrochio, Hugo; Noronha, Jorge
2014-01-01
In this paper we obtain holographic formulas for the transport coefficients $\\kappa$ and $\\tau_\\pi$ present in the second-order derivative expansion of relativistic hydrodynamics in curved spacetime associated with a non-conformal strongly coupled plasma described holographically by an Einstein+Scalar action in the bulk. We compute these coefficients as functions of the temperature in a bottom-up non-conformal model that is tuned to reproduce lattice QCD thermodynamics at zero baryon chemical potential. We directly compute, besides the speed of sound, 6 other transport coefficients that appear at second-order in the derivative expansion. We also give an estimate for the temperature dependence of 11 other transport coefficients taking into account the simplest contribution from non-conformal effects that appear near the QCD crossover phase transition. Using these results, we construct an Israel-Stewart-like theory in flat spacetime containing 13 of these 17 transport coefficients that should be suitable for ph...
Mass transport coefficients from liquid thermal diffusion columns
Energy Technology Data Exchange (ETDEWEB)
Ecenarro, O.; Madariaga, J.A.; Navarro, J.L.; Santamaria, C.M. (Universidad del Pais Vasco, Bilbao (Spain). Dept. de Fisica Aplicada 2); Carrion, J.A.; Saviron, J.M. (Zaragoza Univ. (Spain). Facultad da Ciencias)
1990-03-01
Experimental data on ordinary diffusion coefficient and thermal diffusion for binary liquid systems containing hexane, heptane, benzene, toluene and carbon tetrachloride are obtained from steady and non-steady separation measurements in a thermal diffusion column. The data extraction uses a time evolution theory previously developed by the authors that accounts for density effects (the 'forgotten effect'). The comparison of the diffusion data with those of the literature provides a powerful test of the derived thermal diffusion factors. (orig.).
Guilet, Jérôme; Ogilvie, Gordon I.
2012-08-01
Standard models of accretion discs study the transport of mass on a viscous time-scale but do not consider the transport of magnetic flux. The evolution of a large-scale poloidal magnetic field is, however, an important problem because of its role in the launching of jets and winds and in determining the intensity of turbulence. As a consequence, the transport of poloidal magnetic flux should be considered on an equal basis to the transport of mass. In this paper, we develop a formalism to study such a transport of mass and magnetic flux in a thin accretion disc. The governing equations are derived by performing an asymptotic expansion in the limit of a thin disc, in the regime where the magnetic field is dominated by its vertical component. Turbulent viscosity and resistivity are included, with an arbitrary vertical profile that can be adjusted to mimic the vertical structure of the turbulence. At a given radius and time, the rates of transport of mass and magnetic flux are determined by a one-dimensional problem in the vertical direction, in which the radial gradients of various quantities appear as source terms. We solve this problem to obtain the transport rates and the vertical structure of the disc. This paper is then restricted to the idealized case of uniform diffusion coefficients, while a companion paper will study more realistic vertical profiles of these coefficients. We show the advection of weak magnetic fields to be significantly faster than the advection of mass, contrary to what a crude vertical averaging might suggest. This results from the larger radial velocities away from the mid-plane, which barely affect the mass accretion owing to the low density in these regions but do affect the advection of magnetic flux. Possible consequences of this larger accretion velocity include a potentially interesting time dependence with the magnetic flux distribution evolving faster than the mass distribution. If the disc is not too thin, this fast advection
Reply to "Comment on `Generalized exclusion processes: Transport coefficients' "
Arita, Chikashi; Krapivsky, P. L.; Mallick, Kirone
2016-07-01
We reply to the Comment of Becker, Nelissen, Cleuren, Partoens, and Van den Broeck [Phys. Rev. E 93, 046101 (2016), 10.1103/PhysRevE.93.046101] on our article [Arita, Krapivsky, and Mallick, Phys. Rev. E 90, 052108 (2014), 10.1103/PhysRevE.90.052108] about the transport properties of a class of generalized exclusion processes.
Improved method for calculating neoclassical transport coefficients in the banana regime
Energy Technology Data Exchange (ETDEWEB)
Taguchi, M., E-mail: taguchi.masayoshi@nihon-u.ac.jp [College of Industrial Technology, Nihon University, Narashino 275-8576 (Japan)
2014-05-15
The conventional neoclassical moment method in the banana regime is improved by increasing the accuracy of approximation to the linearized Fokker-Planck collision operator. This improved method is formulated for a multiple ion plasma in general tokamak equilibria. The explicit computation in a model magnetic field shows that the neoclassical transport coefficients can be accurately calculated in the full range of aspect ratio by the improved method. The some neoclassical transport coefficients for the intermediate aspect ratio are found to appreciably deviate from those obtained by the conventional moment method. The differences between the transport coefficients with these two methods are up to about 20%.
Weighted congestion coefficient feedback in intelligent transportation systems
Dong, Chuan-Fei; Ma, Xu; Wang, Bing-Hong
2010-03-01
In traffic systems, a reasonable information feedback can improve road capacity. In this Letter, we study dynamics of traffic flow with real-time information. And the influence of a feedback strategy named Weighted Congestion Coefficient Feedback Strategy (WCCFS) is introduced, based on a two-route scenario in which dynamic information can be generated and displayed on the board to guide road users to make a choice. Our model incorporates the effects of adaptability into the cellular automaton models of traffic flow and simulation results adopting this optimal information feedback strategy have demonstrated high efficiency in controlling spatial distribution of traffic patterns compared with the other three information feedback strategies, i.e., vehicle number and flux.
A Selected Library of Transport Coefficients for Combustion and Plasma Physics Applications
Energy Technology Data Exchange (ETDEWEB)
Cloutman, L.D.
2000-08-01
COYOTE and similar combustion programs based on the multicomponent Navier-Stokes equations require the mixture viscosity, thermal conductivity, and species transport coefficients as input. This report documents a model of these molecular transport coefficients that is simpler than the general theory, but which provides adequate accuracy for many purposes. This model leads to a computationally convenient, self-contained, and easy-to-use source of such data in a format suitable for use by such programs. We present the data for various neutral species in two forms. The first form is a simple functional fit to the transport coefficients. The second form is the use of tabulated Lennard-Jones parameters in simple theoretical expressions for the gas-phase transport coefficients. The model then is extended to the case of a two-temperature plasma. Lennard-Jones parameters are given for a number of chemical species of interest in combustion research.
Sadooghi, N.; Tabatabaee, S. M. A.
2017-05-01
The effects of finite magnetization and electric polarization on dissipative and non-dissipative (anomalous) transport coefficients of a chiral fluid are studied. First, using the second law of thermodynamics as well as Onsager’s time-reversal symmetry principle, the complete set of dissipative transport coefficients of this medium is derived. It is shown that the properties of the resulting shear and bulk viscosities are mainly affected by the anisotropy induced by external electric and magnetic fields. Then, using the fact that the anomaly induced currents do not contribute to entropy production, the corresponding algebro-differential equations to non-dissipative anomalous transport coefficients are derived in a certain derivative expansion. The solutions of these equations show that, within this approximation, anomalous transport coefficients are, in particular, given in terms of the electric susceptibility of the medium.
Viscosity and inertia in cosmic-ray transport - Effects of an average magnetic field
Williams, L. L.; Jokipii, J. R.
1991-01-01
A generalized transport equation is introduced which describes the transport and propagation of cosmic rays in a magnetized, collisionless medium. The equation is valid if the cosmic-ray distribution function is nearly isotropic in momentum, if the ratio of fluid speed to fluid-flow particle speed is small, and if the ratio of collision time to time for change in the macroscopic flow is small. Five independent cosmic-ray viscosity coefficients are found, and the ralationship of this viscosity to particle orbits in a magnetic field is presented.
Mazumder, Surasree; Alam, Jan-e
2014-01-01
The effects of gluon radiation by charm quarks on the transport coefficients {\\it e.g.} drag, longitudinal and transverse diffusion and shear viscosity have been studied within the ambit of perturbative quantum chromodynamics (pQCD) and kinetic theory. We found that while the soft gluon radiation has substantial effects on the transport coefficients of the charm quarks in the quark gluon plasma its effects on the equilibrium distribution function is insignificant.
Convection in axially symmetric accretion discs with microscopic transport coefficients
Malanchev, K. L.; Postnov, K. A.; Shakura, N. I.
2017-01-01
The vertical structure of stationary thin accretion discs is calculated from the energy balance equation with heat generation due to microscopic ion viscosity η and electron heat conductivity κ, both depending on temperature. In the optically thin discs it is found that for the heat conductivity increasing with temperature, the vertical temperature gradient exceeds the adiabatic value at some height, suggesting convective instability in the upper disc layer. There is a critical Prandtl number, Pr = 4/9, above which a Keplerian disc become fully convective. The vertical density distribution of optically thin laminar accretion discs as found from the hydrostatic equilibrium equation cannot be generally described by a polytrope but in the case of constant viscosity and heat conductivity. In the optically thick discs with radiation heat transfer, the vertical disc structure is found to be convectively stable for both absorption-dominated and scattering-dominated opacities, unless a very steep dependence of the viscosity coefficient on temperature is assumed. A polytropic-like structure in this case is found for Thomson scattering-dominated opacity.
Criticality coefficient calculation for a small PWR using Monte Carlo Transport Code
Energy Technology Data Exchange (ETDEWEB)
Trombetta, Debora M.; Su, Jian, E-mail: dtrombetta@nuclear.ufrj.br, E-mail: sujian@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil); Chirayath, Sunil S., E-mail: sunilsc@tamu.edu [Department of Nuclear Engineering and Nuclear Security Science and Policy Institute, Texas A and M University, TX (United States)
2015-07-01
Computational models of reactors are increasingly used to predict nuclear reactor physics parameters responsible for reactivity changes which could lead to accidents and losses. In this work, preliminary results for criticality coefficient calculation using the Monte Carlo transport code MCNPX were presented for a small PWR. The computational modeling developed consists of the core with fuel elements, radial reflectors, and control rods inside a pressure vessel. Three different geometries were simulated, a single fuel pin, a fuel assembly and the core, with the aim to compare the criticality coefficients among themselves.The criticality coefficients calculated were: Doppler Temperature Coefficient, Coolant Temperature Coefficient, Coolant Void Coefficient, Power Coefficient, and Control Rod Worth. The coefficient values calculated by the MCNP code were compared with literature results, showing good agreement with reference data, which validate the computational model developed and allow it to be used to perform more complex studies. Criticality Coefficient values for the three simulations done had little discrepancy for almost all coefficients investigated, the only exception was the Power Coefficient. Preliminary results presented show that simple modelling as a fuel assembly can describe changes at almost all the criticality coefficients, avoiding the need of a complex core simulation. (author)
A Derivation of the Nonlocal Volume-Averaged Equations for Two-Phase Flow Transport
Directory of Open Access Journals (Sweden)
Gilberto Espinosa-Paredes
2012-01-01
Full Text Available In this paper a detailed derivation of the general transport equations for two-phase systems using a method based on nonlocal volume averaging is presented. The local volume averaging equations are commonly applied in nuclear reactor system for optimal design and safe operation. Unfortunately, these equations are limited to length-scale restriction and according with the theory of the averaging volume method, these fail in transition of the flow patterns and boundaries between two-phase flow and solid, which produce rapid changes in the physical properties and void fraction. The non-local volume averaging equations derived in this work contain new terms related with non-local transport effects due to accumulation, convection diffusion and transport properties for two-phase flow; for instance, they can be applied in the boundary between a two-phase flow and a solid phase, or in the boundary of the transition region of two-phase flows where the local volume averaging equations fail.
Jones, Reese E.; Mandadapu, Kranthi K.
2012-04-01
We present a rigorous Green-Kubo methodology for calculating transport coefficients based on on-the-fly estimates of: (a) statistical stationarity of the relevant process, and (b) error in the resulting coefficient. The methodology uses time samples efficiently across an ensemble of parallel replicas to yield accurate estimates, which is particularly useful for estimating the thermal conductivity of semi-conductors near their Debye temperatures where the characteristic decay times of the heat flux correlation functions are large. Employing and extending the error analysis of Zwanzig and Ailawadi [Phys. Rev. 182, 280 (1969)], 10.1103/PhysRev.182.280 and Frenkel [in Proceedings of the International School of Physics "Enrico Fermi", Course LXXV (North-Holland Publishing Company, Amsterdam, 1980)] to the integral of correlation, we are able to provide tight theoretical bounds for the error in the estimate of the transport coefficient. To demonstrate the performance of the method, four test cases of increasing computational cost and complexity are presented: the viscosity of Ar and water, and the thermal conductivity of Si and GaN. In addition to producing accurate estimates of the transport coefficients for these materials, this work demonstrates precise agreement of the computed variances in the estimates of the correlation and the transport coefficient with the extended theory based on the assumption that fluctuations follow a Gaussian process. The proposed algorithm in conjunction with the extended theory enables the calculation of transport coefficients with the Green-Kubo method accurately and efficiently.
Measurement of electron particle transport coefficients in different operational modes of DIII-D
Baker, D. R.; Wade, M. R.; Jackson, G. L.; Maingi, R.; Stockdale, R. E.; de Grassie, J. S.; Groebner, R. J.; Forest, C. B.; Porter, G. D.; DIII-D Team
1998-04-01
Electron transport coefficients have been obtained for different operational modes on the DIII-D tokamak. The operational modes are: double null diverted (DND) low confinement (L mode), DND high confinement (H mode) without edge localized modes (ELM-free), single null diverted (SND) ELM-free H mode and pumped SND ELMing H mode. Various values of plasma current and safety factor (q) profiles were investigated. For the L mode and ELMing H mode, the coefficients were obtained by a modulated puff of deuterium gas at the edge. For the ELM-free modes, the coefficients were obtained by analysing the temporal evolution of the electron density profile immediately after the L-H transition. The results show clearly that the radial profile of the electron diffusion coefficient depends on the operational mode of DIII-D. The difference in the radial dependences of the transport coefficients between the different tokamak operational modes is significant. In the L mode and the ELMing H mode, the diffusion coefficient increases with radius. In ELMing H mode, the diffusion coefficient increases with the edge value of q. The value at the edge for L mode is about twice that for ELMing H mode. In ELM-free H mode, the diffusion coefficient decreases rapidly outside a normalized radius of about 0.8. Within the (relatively large) error bars for ELM-free H mode, there is no measurable difference in diffusion coefficient between the DND and SND plasmas.
Guo, Xiaofeng; Yang, Ting; Sun, Yele
2015-08-01
Based on observations at the heights of 140 and 280 m on the Beijing 325-m meteorological tower, this study presents an assessment of the averaging period effects on eddy-covariance measurements of the momentum/scalar flux and transport efficiency during wintertime haze pollution. The study period, namely from January 6 to February 28 2013, is divided into different episodes of particulate pollution, as featured by varied amounts of the turbulent exchange and conditions of the atmospheric stability. Overall, turbulent fluxes of the momentum and scalars (heat, water vapor, and CO2) increase with the averaging period, namely from 5, 15, and 30 up to 60 min, an outcome most evident during the `transient' episodes (each lasting for 2-3 days, i.e., preceded and followed by clean-air days with mean concentrations of PM1 less than 40 μg m-3). The conventional choice of 30 min is deemed to be appropriate for calculating the momentum flux and its transport efficiency. By comparison, scalar fluxes and their transport efficiencies appear more sensitive to the choice of an averaging period, particularly at the upper level (i.e., 280 m). It is presupposed that, for urban environments, calculating the momentum and scalar fluxes could invoke separate averaging periods, rather than relying on a single prescription (e.g., 30 min). Furthermore, certain characteristics of urban turbulence are found less sensitive to the choice of an averaging period, such as the relationship between the heat-to-momentum transport efficiency and the local stability parameter.
Usang, M. D.; Ivanyuk, F. A.; Ishizuka, C.; Chiba, S.
2016-10-01
Nuclear fission is treated by using the Langevin dynamical description with macroscopic and microscopic transport coefficients (mass and friction tensors), and it is elucidated how the microscopic (shell and pairing) effects in the transport coefficients, especially their dependence on temperature, affects various fission observables. We found that the microscopic transport coefficients, calculated by linear response theory, change drastically as a function of temperature: in general, the friction increases with growing temperature while the mass tensor decreases. This temperature dependence brings a noticeable change in the mass distribution and kinetic energies of fission fragments from nuclei around 236U at an excitation energy of 20 MeV. The prescission kinetic energy decreases from 25 MeV at low temperature to about 2.5 MeV at high temperature. In contrast, the Coulomb kinetic energy increases as the temperature increases. Interpolating the microscopic transport coefficients among the various temperatures enabled our Langevin equation to use the microscopic transport coefficients at a deformation-dependent local temperature of the dynamical evolution. This allowed us to compare directly the fission observables of both macroscopic and microscopic calculations, and we found almost identical results under the conditions considered in this work.
Heavy-quark transport coefficients in a hot viscous quark-gluon plasma medium
Das, Santosh K; Alam, Jan-e
2012-01-01
The heavy-quark (HQ) transport coefficients have been estimated for a viscous quark-gluon plasma medium, utilizing a recently proposed quasi-particle description based on realistic QGP equation of state (EoS). Interactions entering through the equation of state significantly suppress the temperature dependence of the drag coefficient of QGP as compared to that of an ideal system of quarks and gluons. Inclusion of shear and bulk viscosities through the corrections to the thermal phase space factors of the bath particles alters the magnitude of the drag coefficient and the enhancement is significant at lower temperatures. The competition between the effects of realistic EoS and dissipative corrections through phase space factor the former eventually dictate how the drag coefficient would behave as a function of temperature, and how much quantitatively digress from the ideal case. The observations suggest significant impact of both the realistic equation of state, and the viscosities, on the HQs transport at RHI...
Directory of Open Access Journals (Sweden)
KOHIO Niéssan
2014-12-01
Full Text Available In this paper we calculate the transport coefficients of plasmas formed by air and water vapor mixtures. The calculation, which assume local thermodynamic equilibrium (LTE are performed in the temperature range from 500 to 12000 K. We use the Gibbs free energy minimization method to determine the equilibrium composition of the plasmas, which is necessary to calculate the transport coefficients. We use the Chapman-Enskog method to calculate the transport coefficients. The results are presented and discussed according to the rate of water vapor. The results of the total thermal conductivity and electrical conductivity show in particular that the increasing of the rate of water vapor in air can be interesting for power cut. This could be improve the performance of plasma during current breaking in air contaminate by the water vapor.
Energy Technology Data Exchange (ETDEWEB)
Schvidler, M.; Karasaki, K.
2011-06-15
In previous papers (Shvidler and Karasaki, 1999, 2001, 2005, and 2008) we presented and analyzed an approach for finding the general forms of exactly averaged equations of flow and transport in porous media. We studied systems of basic equations for steady flow with sources in unbounded domains with stochastically homogeneous conductivity fields. A brief analysis of exactly averaged equations of nonsteady flow and nonreactive solute transport was also presented. At the core of this approach is the existence of appropriate random Green's functions. For example, we showed that in the case of a 3-dimensional unbounded domain the existence of appropriate random Green's functions is sufficient for finding the exact nonlocal averaged equations for flow velocity using the operator with a unique kernel-vector. Examination of random fields with global symmetry (isotropy, transversal isotropy and orthotropy) makes it possible to describe significantly different types of averaged equations with nonlocal unique operators. It is evident that the existence of random Green's functions for physical linear processes is equivalent to assuming the existence of some linear random operators for appropriate stochastic equations. If we restricted ourselves to this assumption only, as we have done in this paper, we can study the processes in any dimensional bounded or unbounded fields and in addition, cases in which the random fields of conductivity and porosity are stochastically nonhomogeneous, nonglobally symmetrical, etc.. It is clear that examining more general cases involves significant difficulty and constricts the analysis of structural types for the processes being studied. Nevertheless, we show that we obtain the essential information regarding averaged equations for steady and transient flow, as well as for solute transport.
A depth-averaged 2-D model of flow and sediment transport in coastal waters
Sanchez, Alejandro; Wu, Weiming; Beck, Tanya M.
2016-11-01
A depth-averaged 2-D model has been developed to simulate unsteady flow and nonuniform sediment transport in coastal waters. The current motion is computed by solving the phase-averaged 2-D shallow water flow equations reformulated in terms of total-flux velocity, accounting for the effects of wave radiation stresses and general diffusion or mixing induced by current, waves, and wave breaking. The cross-shore boundary conditions are specified by assuming fully developed longshore current and wave setup that are determined using the reduced 1-D momentum equations. A 2-D wave spectral transformation model is used to calculate the wave height, period, direction, and radiation stresses, and a surface wave roller model is adopted to consider the effects of surface roller on the nearshore currents. The nonequilibrium transport of nonuniform total-load sediment is simulated, considering sediment entrainment by current and waves, the lag of sediment transport relative to the flow, and the hiding and exposure effect of nonuniform bed material. The flow and sediment transport equations are solved using an implicit finite volume method on a variety of meshes including nonuniform rectangular, telescoping (quadtree) rectangular, and hybrid triangular/quadrilateral meshes. The flow and wave models are integrated through a carefully designed steering process. The model has been tested in three field cases, showing generally good performance.
Kuang, Hua; Xu, Zhi-Peng; Li, Xing-Li; Lo, Siu-Ming
2017-04-01
In this paper, an extended car-following model is proposed to simulate traffic flow by considering average headway of preceding vehicles group in intelligent transportation systems environment. The stability condition of this model is obtained by using the linear stability analysis. The phase diagram can be divided into three regions classified as the stable, the metastable and the unstable ones. The theoretical result shows that the average headway plays an important role in improving the stabilization of traffic system. The mKdV equation near the critical point is derived to describe the evolution properties of traffic density waves by applying the reductive perturbation method. Furthermore, through the simulation of space-time evolution of the vehicle headway, it is shown that the traffic jam can be suppressed efficiently with taking into account the average headway effect, and the analytical result is consistent with the simulation one.
Transport coefficients for relativistic gas mixtures of hard-sphere particles
Kremer, Gilberto M.; Moratto, Valdemar
2017-04-01
In the present work, we calculate the transport coefficients for a relativistic binary mixture of diluted gases of hard-sphere particles. The gas mixture under consideration is studied within the relativistic Boltzmann equation in the presence of a gravitational field described by the isotropic Schwarzschild metric. We obtain the linear constitutive equations for the thermodynamic fluxes. The driving forces for the fluxes of particles and heat will appear with terms proportional to the gradient of gravitational potential. We discuss the consequences of the gravitational dependence on the driving forces. We obtain general integral expressions for the transport coefficients and evaluate them by assuming a hard-sphere interaction amongst the particles when they collide and not very disparate masses and diameters of the particles of each species. The obtained results are expressed in terms of their temperature dependence through the relativistic parameter which gives the ratio of the rest energy of the particles and the thermal energy of the gas mixture. Plots are given to analyze the behavior of the transport coefficients with respect to the temperature when small variations in masses and diameters of the particles of the species are present. We also analyze for each coefficient the corresponding limits to a single gas so the non-relativistic and ultra-relativistic limiting cases are recovered as well. Furthermore, we show that the transport coefficients have a dependence on the gravitational field.
Turbulent transport coefficients in spherical wedge dynamo simulations of solar-like stars
Warnecke, Jörn; Käpylä, Petri J; Käpylä, Maarit J; Brandenburg, Axel
2016-01-01
We investigate the magnetic field generation in global solar-like convective dynamos in the framework of mean-field theory. We simulate a solar-type star in a wedge-shaped spherical shell, where the interplay between convection and rotation self-consistently drives large-scale dynamo. To analyze the dynamo mechanism we apply the test-field method for azimuthally ($\\phi$) averaged fields to determine the 27 turbulent transport coefficients of the electromotive force, of which 9 are related to the $\\alpha$ effect tensor. This method has previously been used either in simulations in Cartesian coordinates or in the geodynamo context and it is applied here for the first time in simulations of solar-like dynamo action. We find that the $\\phi\\phi$-component of the $\\alpha$ tensor does not follow the profile expected from that of kinetic helicity. Beside the dominant $\\alpha$-$\\Omega$ dynamo, also an $\\alpha^2$ dynamo is locally enhanced. The turbulent pumping velocities significantly alter the effective mean flows a...
Averaging of Stochastic Equations for Flow and Transport in PorousMedia
Energy Technology Data Exchange (ETDEWEB)
Shvidler, Mark; Karasaki, Kenzi
2005-01-07
It is well known that at present exact averaging of theequations of flow and transport in random porous media have been realizedfor only a small number of special fields. Moreover, the approximateaveraging methods are not yet fully understood. For example, theconvergence behavior and the accuracy of truncated perturbation seriesare not well known; and in addition, the calculation of the high-orderperturbations is very complicated. These problems for a long time havestimulated attempts to find the answer for the question: Are there inexistence some exact general and sufficiently universal forms of averagedequations? If the answer is positive, there arises the problem of theconstruction of these equations and analyzing them. There are manypublications on different applications of this problem to various fields,including: Hydrodynamics, flow and transport in porous media, theory ofelasticity, acoustic and electromagnetic waves in random fields, etc.Here, we present a method of finding some general form of exactlyaveraged equations for flow and transport in random fields by using (1)some general properties of the Green s functions for appropriatestochastic problems, and (2) some basic information about the randomfields of the conductivity, porosity and flow velocity. We presentgeneral forms of exactly averaged non-local equations for the followingcases: (1) steady-state flow with sources in porous media with randomconductivity, (2) transient flow with sources in compressible media withrandom conductivity and porosity; and (3) Nonreactive solute transport inrandom porous media. We discuss the problem of uniqueness and theproperties of the non-local averaged equations for cases with some typeof symmetry (isotropic, transversal isotropic and orthotropic), and weanalyze the structure of the nonlocal equations in the general case ofstochastically homogeneous fields.
Evaluation of a scalar eddy transport coefficient based on geometric constraints
Bachman, S. D.; Marshall, D. P.; Maddison, J. R.; Mak, J.
2017-01-01
A suite of idealized models is used to evaluate and compare several previously proposed scalings for the eddy transport coefficient in downgradient mesoscale eddy closures. Of special interest in this comparison is a scaling introduced as part of the eddy parameterization framework of Marshall et al. (2012), which is derived using the inherent geometry of the Eliassen-Palm eddy flux tensor. The primary advantage of using this coefficient in a downgradient closure is that all dimensional terms are explicitly specified and the only uncertainty is a nondimensional parameter, α, which is bounded by one in magnitude. In each model a set of passive tracers is initialized, whose flux statistics are used to invert for the eddy-induced tracer transport. Unlike previous work, where this technique has been employed to diagnose the tensor coefficient of a linear flux-gradient relationship, the idealization of these models allows the lateral eddy transport to be described by a scalar coefficient. The skill of the extant scalings is then measured by comparing their predicted values against the coefficients diagnosed using this method. The Marshall et al. (2012), scaling is shown to scale most closely with the diagnosed coefficients across all simulations. It is shown that the skill of this scaling is due to its functional dependence on the total eddy energy, and that this scaling provides an excellent match to the diagnosed fluxes even in the limit of constant α. Possible extensions to this work, including how to incorporate the resultant transport coefficient into the Gent and McWilliams parameterization, are discussed.
Proton transport properties of poly(aspartic acid) with different average molecular weights
Energy Technology Data Exchange (ETDEWEB)
Nagao, Yuki, E-mail: ynagao@kuchem.kyoto-u.ac.j [Department of Mechanical Systems and Design, Graduate School of Engineering, Tohoku University, 6-6-01 Aoba Aramaki, Aoba-ku, Sendai 980-8579 (Japan); Imai, Yuzuru [Institute of Development, Aging and Cancer (IDAC), Tohoku University, 4-1 Seiryo-cho, Aoba-ku, Sendai 980-8575 (Japan); Matsui, Jun [Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, 2-1-1 Katahira, Sendai 980-8577 (Japan); Ogawa, Tomoyuki [Department of Electronic Engineering, Graduate School of Engineering, Tohoku University, 6-6-05 Aoba Aramaki, Aoba-ku, Sendai 980-8579 (Japan); Miyashita, Tokuji [Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, 2-1-1 Katahira, Sendai 980-8577 (Japan)
2011-04-15
Research highlights: Seven polymers with different average molecular weights were synthesized. The proton conductivity depended on the number-average degree of polymerization. The difference of the proton conductivities was more than one order of magnitude. The number-average molecular weight contributed to the stability of the polymer. - Abstract: We synthesized seven partially protonated poly(aspartic acids)/sodium polyaspartates (P-Asp) with different average molecular weights to study their proton transport properties. The number-average degree of polymerization (DP) for each P-Asp was 30 (P-Asp30), 115 (P-Asp115), 140 (P-Asp140), 160 (P-Asp160), 185 (P-Asp185), 205 (P-Asp205), and 250 (P-Asp250). The proton conductivity depended on the number-average DP. The maximum and minimum proton conductivities under a relative humidity of 70% and 298 K were 1.7 . 10{sup -3} S cm{sup -1} (P-Asp140) and 4.6 . 10{sup -4} S cm{sup -1} (P-Asp250), respectively. Differential thermogravimetric analysis (TG-DTA) was carried out for each P-Asp. The results were classified into two categories. One exhibited two endothermic peaks between t = (270 and 300) {sup o}C, the other exhibited only one peak. The P-Asp group with two endothermic peaks exhibited high proton conductivity. The high proton conductivity is related to the stability of the polymer. The number-average molecular weight also contributed to the stability of the polymer.
Transport coefficients and entropy-scaling law in liquid iron up to Earth-core pressures.
Cao, Qi-Long; Wang, Pan-Pan; Huang, Duo-Hui; Yang, Jun-Sheng; Wan, Ming-Jie; Wang, Fan-Hou
2014-03-21
Molecular dynamics simulations were applied to study the structural and transport properties, including the pair distribution function, the structure factor, the pair correlation entropy, self-diffusion coefficient, and viscosity, of liquid iron under high temperature and high pressure conditions. Our calculated results reproduced experimentally determined structure factors of liquid iron, and the calculated self-diffusion coefficients and viscosity agree well with previous simulation results. We show that there is a moderate increase of self-diffusion coefficients and viscosity along the melting curve up to the Earth-core pressure. Furthermore, the temperature dependencies of the pair correlation entropy, self-diffusion, and viscosity under high pressure condition have been investigated. Our results suggest that the temperature dependence of the pair correlation entropy is well described by T(-1) scaling, while the Arrhenius law well describes the temperature dependencies of self-diffusion coefficients and viscosity under high pressure. In particular, we find that the entropy-scaling laws, proposed by Rosenfeld [Phys. Rev. A 15, 2545 (1977)] and Dzugutov [Nature (London) 381, 137 (1996)] for self-diffusion coefficients and viscosity in liquid metals under ambient pressure, still hold well for liquid iron under high temperature and high pressure conditions. Using the entropy-scaling laws, we can obtain transport properties from structural properties under high pressure and high temperature conditions. The results provide a useful ingredient in understanding transport properties of planet's cores.
On the definition of Burnett transport coefficients of the dense multi-element charged matter
Pavlov, G A
2003-01-01
To determine the Burnett transport coefficients of non-ideal multi-element charged matter the representations of conservation equations of matter as generalized Langevin equations are used. Mori's algorithm is revised to derive the equation of motion of a dynamical value operator of a system in the form of the generalized nonlinear Langevin equation. After transformation, using necessary variational derivatives, these equations are compared with the Burnett hydrodynamical conservation equations. In consequence, the response function expressions of transport coefficients corresponding to second-order derivatives of thermal disturbances are found in the long-wavelength and low-frequency limits. To establish a link between the results of the executed investigations and hydrodynamical problems the properties of the high derivative coefficients matrix of the set of conservation equations in the linearized Burnett approximation are discussed.
Zhou, YE; Vahala, George
1993-01-01
The advection of a passive scalar by incompressible turbulence is considered using recursive renormalization group procedures in the differential sub grid shell thickness limit. It is shown explicitly that the higher order nonlinearities induced by the recursive renormalization group procedure preserve Galilean invariance. Differential equations, valid for the entire resolvable wave number k range, are determined for the eddy viscosity and eddy diffusivity coefficients, and it is shown that higher order nonlinearities do not contribute as k goes to 0, but have an essential role as k goes to k(sub c) the cutoff wave number separating the resolvable scales from the sub grid scales. The recursive renormalization transport coefficients and the associated eddy Prandtl number are in good agreement with the k-dependent transport coefficients derived from closure theories and experiments.
Pérez Guerrero, J. S.; Skaggs, T. H.
2010-08-01
SummaryMathematical models describing contaminant transport in heterogeneous porous media are often formulated as an advection-dispersion transport equation with distance-dependent transport coefficients. In this work, a general analytical solution is presented for the linear, one-dimensional advection-dispersion equation with distance-dependent coefficients. An integrating factor is employed to obtain a transport equation that has a self-adjoint differential operator, and a solution is found using the generalized integral transform technique (GITT). It is demonstrated that an analytical expression for the integrating factor exists for several transport equation formulations of practical importance in groundwater transport modeling. Unlike nearly all solutions available in the literature, the current solution is developed for a finite spatial domain. As an illustration, solutions for the particular case of a linearly increasing dispersivity are developed in detail and results are compared with solutions from the literature. Among other applications, the current analytical solution will be particularly useful for testing or benchmarking numerical transport codes because of the incorporation of a finite spatial domain.
Cortinez, J. M.; Valocchi, A. J.; Herrera, P. A.
2013-12-01
Because of the finite size of numerical grids, it is very difficult to correctly account for processes that occur at different spatial scales to accurately simulate the migration of conservative and reactive compounds dissolved in groundwater. In one hand, transport processes in heterogeneous porous media are controlled by local-scale dispersion associated to transport processes at the pore-scale. On the other hand, variations of velocity at the continuum- or Darcy-scale produce spreading of the contaminant plume, which is referred to as macro-dispersion. Furthermore, under some conditions both effects interact, so that spreading may enhance the action of local-scale dispersion resulting in higher mixing, dilution and reaction rates. Traditionally, transport processes at different spatial scales have been included in numerical simulations by using a single dispersion coefficient. This approach implicitly assumes that the separate effects of local-dispersion and macro-dispersion can be added and represented by a unique effective dispersion coefficient. Moreover, the selection of the effective dispersion coefficient for numerical simulations usually do not consider the filtering effect of the grid size over the small-scale flow features. We have developed a multi-scale Lagragian numerical method that allows using two different dispersion coefficients to represent local- and macro-scale dispersion. This technique considers fluid particles that carry solute mass and whose locations evolve according to a deterministic component given by the grid-scale velocity and a stochastic component that corresponds to a block-effective macro-dispersion coefficient. Mass transfer between particles due to local-scale dispersion is approximated by a meshless method. We use our model to test under which transport conditions the combined effect of local- and macro-dispersion are additive and can be represented by a single effective dispersion coefficient. We also demonstrate that for
Curtis, Gary P.; Lu, Dan; Ye, Ming
2015-01-01
While Bayesian model averaging (BMA) has been widely used in groundwater modeling, it is infrequently applied to groundwater reactive transport modeling because of multiple sources of uncertainty in the coupled hydrogeochemical processes and because of the long execution time of each model run. To resolve these problems, this study analyzed different levels of uncertainty in a hierarchical way, and used the maximum likelihood version of BMA, i.e., MLBMA, to improve the computational efficiency. This study demonstrates the applicability of MLBMA to groundwater reactive transport modeling in a synthetic case in which twenty-seven reactive transport models were designed to predict the reactive transport of hexavalent uranium (U(VI)) based on observations at a former uranium mill site near Naturita, CO. These reactive transport models contain three uncertain model components, i.e., parameterization of hydraulic conductivity, configuration of model boundary, and surface complexation reactions that simulate U(VI) adsorption. These uncertain model components were aggregated into the alternative models by integrating a hierarchical structure into MLBMA. The modeling results of the individual models and MLBMA were analyzed to investigate their predictive performance. The predictive logscore results show that MLBMA generally outperforms the best model, suggesting that using MLBMA is a sound strategy to achieve more robust model predictions relative to a single model. MLBMA works best when the alternative models are structurally distinct and have diverse model predictions. When correlation in model structure exists, two strategies were used to improve predictive performance by retaining structurally distinct models or assigning smaller prior model probabilities to correlated models. Since the synthetic models were designed using data from the Naturita site, the results of this study are expected to provide guidance for real-world modeling. Limitations of applying MLBMA to the
Maezawa, Yu; Hatsuda, Tetsuo; Koide, Tomoi
2010-01-01
Transport coefficients of causal dissipative relativistic fluid dynamics (CDR) are studied in quenched lattice simulations. CDR describes the behavior of relativistic non-Newtonian fluids in which the relaxation time appears as a new transport coefficient besides the shear and bulk viscosities. It was recently shown that these coefficients can be given by the temporal-correlation functions of the energy-momentum tensors as in the case of the Green-Kubo-Nakano formula. By using the new formula in CDR, we study the transport coefficients with lattice simulations in pure SU(3) gauge theory. After defining the energy-momentum tensor on the lattice, we extract a ratio of the shear viscosity to the relaxation time which is given only in terms of the static correlation functions. The simulations are performed on $24^3 \\times 4$--16 lattices with $\\beta_{_{\\rm LAT}} = 6.0$, which corresponds to the temperature range of $0.5 \\simle T/T_c \\simle 1.8$, where $T_c$ is the critical temperature.
Automatic evaluation of edge transport coefficients with B2-SOLPS5.0
Energy Technology Data Exchange (ETDEWEB)
Coster, D.P.; Kim, J.W.; Haas, G.; Kurzan, B.; Murmann, H.; Neuhauser, J.; Salzmann, H.; Schneider, W.; Schweinzer, J. [Association Euratom-Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Schneider, R. [Max-Planck-Institut fuer Plasmaphysik, Greifswald (Germany). EURATOM Association
2000-07-01
One of the most critical parameters for the predictive capability of edge transport calculations is the description of the radial turbulent (anomalous) transport. Due to the complexity of the edge, highly sophisticated 2d numerical transport codes have been developed with run times per case of order of weeks, which limits their application to a small number of typical scenarios. Downgraded versions with a simpler neutral model, coarser grid (one half normal resolution) and eventually simplified radiation losses, can be fast enough (hours per run) to allow a routine mid-plane profile analysis, at least for cases where divertor details are less important. Implementation of appropriate iteration and control loops allow an automatic fit of the anomalous transport coefficients with the new B2-SOLPS5.0. The minimization algorithm is generalized such that additional experimental information such as neutral fluxes, divertor profiles or spectroscopic measurements, can easily be included for a better discrimination of different anomalous transport laws (constant transport coefficients, 1/n like scaled or Bohm-like scaled). A special feature of the fit routine is the determination of the position of the separatrix from the power balance equations. This is necessary because the experimental uncertainty of about +/- 0.5 cm is comparable to the experimentally observed gradient lengths. (orig.)
Pannone, Marilena
2014-03-01
A large-time analytical solution is proposed for the spatial variance and coefficient of variation of the depth-averaged concentration due to instantaneous, cross sectionally uniform solute sources in pseudorectangular open channel flows. The mathematical approach is based on the use of the Green functions and on the Fourier decomposition of the depth-averaged velocities, coupled with the method of the images. The variance spatial trend is characterized by a minimum at the center of the mass and two mobile, decaying symmetrical peaks which, at very large times, are located at the inflexion points of the average Gaussian distribution. The coefficient of variation, which provides an estimate of the expected percentage deviation of the depth-averaged point concentrations about the section-average, exhibits a minimum at the center which decays like t-1 and only depends on the river diffusive time scale. The defect of cross-sectional mixing quickly increases with the distance from the center, and almost linearly at large times. Accurate numerical Lagrangian simulations were performed to validate the analytical results in preasymptotic and asymptotic conditions, referring to a particularly representative sample case for which cross-sectional depth and velocity measurements were known from a field survey. In addition, in order to discuss the practical usefulness of computing large-time concentration spatial moments in river flows, and resorting to directly measured input data, the order of magnitude of section-averaged concentrations and corresponding coefficients of variation was estimated in field conditions and for hypothetical contamination scenarios, considering a unit normalized mass impulsively injected across the transverse section of 81 U.S. rivers.
Energy Technology Data Exchange (ETDEWEB)
Morawetz, K
1999-07-01
Within the frame of kinetic theory a response function is derived for finite Fermi systems which includes dissipation in relaxation time approximation and a contribution from additional chaotic processes characterized by the largest Lyapunov exponent. A generalized local density approximation is presented including the effect of many particle relaxation and the additional chaotic scattering. For small Lyapunov exponents relative to the product of wave vector and Fermi time. Therefore the transport coefficients can be connected with the largest positive Lyapunov exponent in the same way as known the transport theory in relaxation time approximation. (author)
Transport coefficients for electrolytes in arbitrarily shaped nano and micro-fluidic channels
Mortensen, N A; Olesen, L H
2006-01-01
We consider laminar flow of incompressible electrolytes in long, straight channels driven by pressure and electro-osmosis. We use a Hilbert space eigenfunction expansion to address the general problem of an arbitrary cross section and obtain general results in linear-response theory for the hydraulic and electrical transport coefficients which satisfy Onsager relations. In the limit of non-overlapping Debye layers the transport coefficients are simply expressed in terms of parameters of the electrolyte as well as the geometrical correction factor for the Hagen-Poiseuille part of the problem. In particular, we consider the limits of thin non-overlapping as well as strongly overlapping Debye layers, respectively, and calculate the corrections to the hydraulic resistance due to electro-hydrodynamic interactions.
A Compensatory Approach to Multiobjective Linear Transportation Problem with Fuzzy Cost Coefficients
Directory of Open Access Journals (Sweden)
Hale Gonce Kocken
2011-01-01
Full Text Available This paper deals with the Multiobjective Linear Transportation Problem that has fuzzy cost coefficients. In the solution procedure, many objectives may conflict with each other; therefore decision-making process becomes complicated. And also due to the fuzziness in the costs, this problem has a nonlinear structure. In this paper, fuzziness in the objective functions is handled with a fuzzy programming technique in the sense of multiobjective approach. And then we present a compensatory approach to solve Multiobjective Linear Transportation Problem with fuzzy cost coefficients by using Werner's and operator. Our approach generates compromise solutions which are both compensatory and Pareto optimal. A numerical example has been provided to illustrate the problem.
Albright, M
2016-01-01
We develop a flexible quasiparticle theory of transport coefficients of hot hadronic matter at finite baryon density. We begin with a hadronic quasiparticle model which includes a scalar and a vector mean field. Quasiparticle energies and the mean fields depend on temperature and baryon chemical potential. Starting with the quasiparticle dispersion relation, we derive the Boltzmann equation and use the Chapman-Enskog expansion to derive formulas for the shear and bulk viscosities and thermal conductivity. We obtain both relaxation time approximation formulas and more general integral equations. Throughout the work, we explicitly enforce the Landau-Lifshitz conditions of fit and ensure the theory is thermodynamically self-consistent. The derived formulas should be useful for predicting the transport coefficients of the hadronic phase of matter produced in heavy-ion collisions at the Relativistic Heavy Ion Collider (RHIC) and at other accelerators.
Ion collisional transport coefficients in the solar wind at 1 AU
Hellinger, Petr
2016-01-01
Proton and alpha particle collisional transport coefficients (isotropization, relative deceleration frequencies and heating rates) at 1 AU are quantified using the WIND/SWE data. In agreement with previous studies the ion-ion Coulomb collisions are generally important for slow solar wind streams and tend to reduce the temperature anisotropies, the differential streaming and the differences between proton and alpha particle temperatures. In slow solar wind streams the Coulomb collisions between protons and alpha particles are important for the overall proton energetics as well as for the relative deceleration between the two species. It is also shown that ion temperature anisotropies and differential streaming need to be generally taken into account for evaluation of the collisional transport coefficients.
Influence of state-to-state vibrational distributions on transport coefficients of a single gas
Kustova, Elena V.; Kremer, Gilberto M.
2016-11-01
In this work the influence of the size of vibrationally and rotationally excited molecules on the collision integrals required for the calculation of state-to-state transport coefficients is discussed. Several diatomic molecules are considered: N2, O2, NO, H2, Cl2. It is shown that whereas the molecular size is not affected by rotational excitation, it strongly depends on the vibrational state. Particular emphasis is given to the shear viscosity and thermal conductivity coefficients calculated in the temperature range 2 500-20 000 K for equilibrium Boltzmann vibrational distributions. It is shown that under conditions of local thermal equilibrium, the effect of vibrational excitation on the shear viscosity and thermal conductivity coefficients are found to be negligible for temperatures below 5 000 K, except for the case of Cl2 molecule where at 5 000 K the effect is about 10%. For T > 10 000 K, the contribution of excited states becomes important and reaches 10-25%.
Heavy-quark transport coefficients in a hot viscous quark-gluon plasma medium
Das, Santosh K.; Chandra, Vinod; Alam, Jan-e.
2014-01-01
Heavy-quark (HQ) transport coefficients have been estimated for a viscous quark-gluon plasma (QGP) medium, utilizing a recently proposed quasi-particle description based on a realistic QGP equation of state (EoS). Interactions entering through the EoS significantly suppress the temperature dependence of the drag coefficient of QGP, compared to those of an ideal relativistic system of quarks and gluons. The inclusion of shear and bulk viscosities through the corrections to the thermal phase space factors of the bath particles alters the magnitude of the drag coefficient; the enhancement is significant at lower temperatures. In the competition between the effects of the EoS and dissipative corrections through phase space factors, the former eventually dictate how the drag coefficient would behave as a function of temperature and how much it quantitatively digresses from the ideal case. The observations suggest a significant impact of both the realistic EoS and the viscosities on the HQs transport at Relativistic Heavy Ion Collider and Large Hadron Collider collision energies.
Reymbaut, A.; Gagnon, A.-M.; Bergeron, D.; Tremblay, A.-M. S.
2017-03-01
The computation of transport coefficients, even in linear response, is a major challenge for theoretical methods that rely on analytic continuation of correlation functions obtained numerically in Matsubara space. While maximum entropy methods can be used for certain correlation functions, this is not possible in general, important examples being the Seebeck, Hall, Nernst, and Reggi-Leduc coefficients. Indeed, positivity of the spectral weight on the positive real-frequency axis is not guaranteed in these cases. The spectral weight can even be complex in the presence of broken time-reversal symmetry. Various workarounds, such as the neglect of vertex corrections or the study of the infinite frequency or Kelvin limits, have been proposed. Here, we show that one can define auxiliary response functions that allow one to extract the desired real-frequency susceptibilities from maximum entropy methods in the most general multiorbital cases with no particular symmetry. As a benchmark case, we study the longitudinal thermoelectric response and corresponding Onsager coefficient in the single-band two-dimensional Hubbard model treated with dynamical mean-field theory and continuous-time quantum Monte Carlo. We thereby extend the maximum entropy analytic continuation with auxiliary functions (MaxEntAux method), developed for the study of the superconducting pairing dynamics of correlated materials, to transport coefficients.
Kikuchi, Yuta; Kunihiro, Teiji
2016-01-01
We give a detailed derivation of the second-order (local) hydrodynamics for Boltzmann equation with an external force by using the renormalization group method. In this method, we solve the Boltzmann equation faithfully to extract the hydrodynamics without recourse to any ansatz. Our method leads to microscopic expressions of not only all the transport coefficients that are of the same form as those in Chapman-Enskog method but also those of the viscous relaxation times $\\tau_i$ that admit physically natural interpretations. As an example, we apply our microscopic expressions to calculate the transport coefficients and the relaxation times of the cold fermionic atoms in a quantitative way, where the transition probability in the collision term is given explicitly in terms of the $s$-wave scattering length $a_s$. We thereby discuss the quantum statistical effects, temperature dependence, and scattering-length dependence of the first-order transport coefficients and the viscous relaxation times: It is shown tha...
Paniagua, Ramón; Ventura, María-de-Jesús; Avila-Díaz, Marcela; Cisneros, Alejandra; Vicenté-Martínez, Marlén; Furlong, María-Del-Carmen; García-González, Zuzel; Villanueva, Diana; Orihuela, Oscar; Prado-Uribe, María-Del-Carmen; Alcántara, Guadalupe; Amato, Dante
2009-01-01
Icodextrin-based solutions (ICO) have clinical and theoretical advantages over glucose-based solutions (GLU) in fluid and metabolic management of diabetic peritoneal dialysis (PD) patients; however, these advantages have not yet been tested in a randomized fashion. To analyze the effects of ICO on metabolic and fluid control in high and high-average transport diabetic patients on continuous ambulatory PD (CAPD). A 12-month, multicenter, open-label, randomized controlled trial was conducted to compare ICO (n = 30) versus GLU (n = 29) in diabetic CAPD patients with high-average and high peritoneal transport characteristics. The basic daily schedule was 3 x 2 L GLU (1.5%) and either 1 x 2 L ICO (7.5%) or 1 x 2 L GLU (2.5%) for the long-dwell exchange, with substitution of 2.5% or 4.25% for 1.5% GLU being allowed when clinically necessary. Variables related to metabolic and fluid control were measured each month. Groups were similar at baseline in all measured variables. More than 66% of the patients using GLU, but only 9% using ICO, needed prescriptions of higher glucose concentration solutions. Ultrafiltration (UF) was higher (198 +/- 101 mL/day, p ICO group than in the GLU group over time. Changes from baseline were more pronounced in the ICO group than in the GLU group for extracellular fluid volume (0.23 +/- 1.38 vs -1.0 +/- 1.48 L, p ICO group had better metabolic control than those in the GLU group: glucose absorption was more reduced (-17 +/- 44 vs -64 +/- 35 g/day) as were insulin needs (3.6 +/- 3.4 vs - 9.1 +/- 4.7 U/day, p ICO group had fewer adverse events related to fluid and glucose control than patients in the GLU group. Icodextrin represents a significant advantage in the management of high transport diabetic patients on PD, improving peritoneal UF and fluid control and reducing the burden of glucose overexposure, thereby facilitating metabolic control.
Zhao, Lei; Yu, Yiqun; Delzanno, Gian Luca; Jordanova, Vania K.
2015-04-01
Local acceleration via whistler wave and particle interaction plays a significant role in particle dynamics in the radiation belt. In this work we explore gyroresonant wave-particle interaction and quasi-linear diffusion in different magnetic field configurations related to the 17 March 2013 storm. We consider the Earth's magnetic dipole field as a reference and compare the results against nondipole field configurations corresponding to quiet and stormy conditions. The latter are obtained with the ring current-atmosphere interactions model with a self-consistent magnetic field (RAM-SCB), a code that models the Earth's ring current and provides a realistic modeling of the Earth's magnetic field. By applying quasi-linear theory, the bounce- and Magnetic Local Time (MLT)-averaged electron pitch angle, mixed-term, and energy diffusion coefficients are calculated for each magnetic field configuration. For radiation belt (˜1 MeV) and ring current (˜100 keV) electrons, it is shown that at some MLTs the bounce-averaged diffusion coefficients become rather insensitive to the details of the magnetic field configuration, while at other MLTs storm conditions can expand the range of equatorial pitch angles where gyroresonant diffusion occurs and significantly enhance the diffusion rates. When MLT average is performed at drift shell L=4.25 (a good approximation to drift average), the diffusion coefficients become quite independent of the magnetic field configuration for relativistic electrons, while the opposite is true for lower energy electrons. These results suggest that, at least for the 17 March 2013 storm and for L≲4.25, the commonly adopted dipole approximation of the Earth's magnetic field can be safely used for radiation belt electrons, while a realistic modeling of the magnetic field configuration is necessary to describe adequately the diffusion rates of ring current electrons.
Transport coefficients of heavy quarks around $T_c$ at finite quark chemical potential
Berrehrah, H; Aichelin, J; Cassing, W; Torres-Rincon, J M; Bratkovskaya, E
2014-01-01
The interactions of heavy quarks with the partonic environment at finite temperature $T$ and finite quark chemical potential $\\mu_q$ are investigated in terms of transport coefficients within the Dynamical Quasi-Particle model (DQPM) designed to reproduce the lattice-QCD results (including the partonic equation of state) in thermodynamic equilibrium. These results are confronted with those of nuclear many-body calculations close to the critical temperature $T_c$. The hadronic and partonic spatial diffusion coefficients join smoothly and show a pronounced minimum around $T_c$, at $\\mu_q=0$ as well as at finite $\\mu_q$. Close and above $T_c$ its absolute value matches the lQCD calculations for $\\mu_q=0$. The smooth transition of the heavy quark transport coefficients from the hadronic to the partonic medium corresponds to a cross over in line with lattice calculations, and differs substantially from perturbative QCD (pQCD) calculations which show a large discontinuity at $T_c$. This indicates that in the vicini...
Oil droplets transport due to irregular waves: Development of large-scale spreading coefficients.
Geng, Xiaolong; Boufadel, Michel C; Ozgokmen, Tamay; King, Thomas; Lee, Kenneth; Lu, Youyu; Zhao, Lin
2016-03-15
The movement of oil droplets due to waves and buoyancy was investigated by assuming an irregular sea state following a JONSWAP spectrum and four buoyancy values. A technique known as Wheeler stretching was used to model the movement of particles under the moving water surface. In each simulation, 500 particles were released and were tracked for a real time of 4.0 h. A Monte Carlo approach was used to obtain ensemble properties. It was found that small eddy diffusivities that decrease rapidly with depth generated the largest horizontal spreading of the plume. It was also found that large eddy diffusivities that decrease slowly with depth generated the smallest horizontal spreading coefficient of the plume. The increase in buoyancy resulted in a decrease in the horizontal spreading coefficient, which suggests that two-dimensional (horizontal) models that predict the transport of surface oil could be overestimating the spreading of oil.
Directory of Open Access Journals (Sweden)
Maria Jarzyńska
2011-01-01
Full Text Available On the basis of Kedem-Katchalsky equations a mathematical analysis of volume flow (Jv of a binary solution through a membrane (M is presented. Two cases of transport generators have been considered: hydrostatic (Δp as well as osmotic (Δπ pressure difference. Based on the Poiseuille's law we derive the formula for the membrane filtration coefficient (Lp which takes into account the membrane properties, kinetic viscosity and density of a solution flowing across the membrane. With use of this formula we have made model calculations of the filtration coefficient Lp and volume flow Jv for a polymer membrane in the case when the solutions on both sides of the membrane are mixed.
Energy Technology Data Exchange (ETDEWEB)
Futatani, Shimpei; Bos, Wouter J. T. [LMFA-CNRS UMR 5509, Ecole Centrale de Lyon, Université de Lyon, 69134 Ecully (France); Morales, Jorge A. [CEA Cadarache, St. Paul Lez Durance (France)
2015-05-15
It can be shown that in the presence of a toroidal magnetic field induced by poloidal coils, combined with the electromagnetic field induced by a central solenoid, no static equilibrium is possible within the MHD description, as soon as non-zero resistivity is assumed. The resulting dynamic equilibrium was previously discussed for the case of spatially homogeneous resisitivity. In the present work, it is shown how a spatial inhomogeneity of the viscosity and resisitivity coefficients influences this equilibrium. Parameters in both the stable, tokamak-like regime and unstable, reversed field pinch-like regime are considered. It is shown that, whereas the magnitudes of the velocity and magnetic field fluctuations are strongly modified by the spatial variation of the transport coefficients, the qualitative flow behaviour remains largely unaffected.
Istomin, V. A.; Kustova, E. V.
2017-02-01
The influence of electronic excitation on transport processes in non-equilibrium high-temperature ionized mixture flows is studied. Two five-component mixtures, N 2 / N2 + / N / N + / e - and O 2 / O2 + / O / O + / e - , are considered taking into account the electronic degrees of freedom for atomic species as well as the rotational-vibrational-electronic degrees of freedom for molecular species, both neutral and ionized. Using the modified Chapman-Enskog method, the transport coefficients (thermal conductivity, shear viscosity and bulk viscosity, diffusion and thermal diffusion) are calculated in the temperature range 500-50 000 K. Thermal conductivity and bulk viscosity coefficients are strongly affected by electronic states, especially for neutral atomic species. Shear viscosity, diffusion, and thermal diffusion coefficients are not sensible to electronic excitation if the size of excited states is assumed to be constant. The limits of applicability for the Stokes relation are discussed; at high temperatures, this relation is violated not only for molecular species but also for electronically excited atomic gases. Two test cases of strongly non-equilibrium flows behind plane shock waves corresponding to the spacecraft re-entry (Hermes and Fire II) are simulated numerically. Fluid-dynamic variables and heat fluxes are evaluated in gases with electronic excitation. In inviscid flows without chemical-radiative coupling, the flow-field is weakly affected by electronic states; however, in viscous flows, their influence can be more important, in particular, on the convective heat flux. The contribution of different dissipative processes to the heat transfer is evaluated as well as the effect of reaction rate coefficients. The competition of diffusion and heat conduction processes reduces the overall effect of electronic excitation on the convective heating, especially for the Fire II test case. It is shown that reliable models of chemical reaction rates are of great
Calculation of a plasma HgDyI{sub 3} transport coefficients
Energy Technology Data Exchange (ETDEWEB)
Hajji, S.; HadjSalah, S.; Benhalima, A.; Charrada, K. [IPEIM, Unité d' Etude des Milieux Ionisés et Réactifs, 5019 route de Kairouan Monastir (Tunisia); Zissis, G. [Laboratoire Plasma et Conversion d' Énergie, 118 rte Narbonne, Bât3R2, 31062 Toulouse (France)
2015-05-15
This work is devoted to the calculation of the chemical composition and transport coefficients of HgDyI{sub 3} plasmas in thermal equilibrium. These calculations are performed for pressures equal to 2MP and for temperatures varying from 1000 to 10 000 K. The thermal and electrical conductivity as well as viscosity have been computed as a function of temperature at different atomic ratios. The computational method proposed by Devoto from the classical formalism described by Hirschfelder et al. [Molecular Theory of Gases and Liquids (John Wiley and Sons, New York, 1954)] is used.
Transport coefficients for the shear dynamo problem at small Reynolds numbers.
Singh, Nishant K; Sridhar, S
2011-05-01
We build on the formulation developed in S. Sridhar and N. K. Singh [J. Fluid Mech. 664, 265 (2010)] and present a theory of the shear dynamo problem for small magnetic and fluid Reynolds numbers, but for arbitrary values of the shear parameter. Specializing to the case of a mean magnetic field that is slowly varying in time, explicit expressions for the transport coefficients α(il) and η(il) are derived. We prove that when the velocity field is nonhelical, the transport coefficient α(il) vanishes. We then consider forced, stochastic dynamics for the incompressible velocity field at low Reynolds number. An exact, explicit solution for the velocity field is derived, and the velocity spectrum tensor is calculated in terms of the Galilean-invariant forcing statistics. We consider forcing statistics that are nonhelical, isotropic, and delta correlated in time, and specialize to the case when the mean field is a function only of the spatial coordinate X(3) and time τ; this reduction is necessary for comparison with the numerical experiments of A. Brandenburg, K. H. Rädler, M. Rheinhardt, and P. J. Käpylä [Astrophys. J. 676, 740 (2008)]. Explicit expressions are derived for all four components of the magnetic diffusivity tensor η(il)(τ). These are used to prove that the shear-current effect cannot be responsible for dynamo action at small Re and Rm, but for all values of the shear parameter.
Thermodynamic properties and transport coefficients of two-temperature helium thermal plasmas
Guo, Xiaoxue; Murphy, Anthony B.; Li, Xingwen
2017-03-01
Helium thermal plasmas are in widespread use in arc welding and many other industrial applications. Simulation of these processes relies on accurate plasma property data, such as plasma composition, thermodynamic properties and transport coefficients. Departures from LTE (local thermodynamic equilibrium) generally occur in some regions of helium plasmas. In this paper, properties are calculated allowing for different values of the electron temperature, T e, and heavy-species temperature, T h, at atmospheric pressure from 300 K to 30 000 K. The plasma composition is first calculated using the mass action law, and the two-temperature thermodynamic properties are then derived. The viscosity, diffusion coefficients, electrical conductivity and thermal conductivity of the two-temperature helium thermal plasma are obtained using a recently-developed method that retains coupling between electrons and heavy species by including the electron–heavy-species collision term in the heavy-species Boltzmann equation. It is shown that the viscosity and the diffusion coefficients strongly depend on non-equilibrium ratio θ (θ ={{T}\\text{e}}/{{T}\\text{h}} ), through the plasma composition and the collision integrals. The electrical conductivity, which depends on the electron number density and ordinary diffusion coefficients, and the thermal conductivity have similar dependencies. The choice of definition of the Debye length is shown to affect the electrical conductivity significantly for θ > 1. By comparing with literature data, it is shown that the coupling between electrons and heavy species has a significant influence on the electrical conductivity, but not on the viscosity. Plasma properties are tabulated in the supplementary data.
On a nonlinear degenerate parabolic transport-diffusion equation with a discontinuous coefficient
Directory of Open Access Journals (Sweden)
John D. Towers
2002-10-01
Full Text Available We study the Cauchy problem for the nonlinear (possibly strongly degenerate parabolic transport-diffusion equation $$ partial_t u + partial_x (gamma(xf(u=partial_x^2 A(u, quad A'(cdotge 0, $$ where the coefficient $gamma(x$ is possibly discontinuous and $f(u$ is genuinely nonlinear, but not necessarily convex or concave. Existence of a weak solution is proved by passing to the limit as $varepsilondownarrow 0$ in a suitable sequence ${u_{varepsilon}}_{varepsilon>0}$ of smooth approximations solving the problem above with the transport flux $gamma(xf(cdot$ replaced by $gamma_{varepsilon}(xf(cdot$ and the diffusion function $A(cdot$ replaced by $A_{varepsilon}(cdot$, where $gamma_{varepsilon}(cdot$ is smooth and $A_{varepsilon}'(cdot>0$. The main technical challenge is to deal with the fact that the total variation $|u_{varepsilon}|_{BV}$ cannot be bounded uniformly in $varepsilon$, and hence one cannot derive directly strong convergence of ${u_{varepsilon}}_{varepsilon>0}$. In the purely hyperbolic case ($A'equiv 0$, where existence has already been established by a number of authors, all existence results to date have used a singular maolinebreak{}pping to overcome the lack of a variation bound. Here we derive instead strong convergence via a series of a priori (energy estimates that allow us to deduce convergence of the diffusion function and use the compensated compactness method to deal with the transport term. Submitted April 29, 2002. Published October 27, 2002. Math Subject Classifications: 35K65, 35D05, 35R05, 35L80 Key Words: Degenerate parabolic equation; nonconvex flux; weak solution; discontinuous coefficient; viscosity method; a priori estimates; compensated compactness
Transport coefficients of O(N) scalar field theories close to the critical point
Nakano, Eiji; Friman, Bengt
2011-01-01
We investigate the critical dynamics of O(N)-symmetric scalar field theories to determine the critical exponents of transport coefficients as a second-order phase transition is approached from the symmetric phase. A set of stochastic equations of motion for the slow modes is formulated, and the long wavelength dynamics is examined for an arbitrary number of field components, $N$, in the framework of the dynamical renormalization group within the $\\epsilon$ expansion. We find that for a single component scalar field theory, N=1, the system reduces to the model C of critical dynamics, whereas for $N>1$ the model G is effectively restored owing to dominance of O(N)-symmetric charge fluctuations. In both cases, the shear viscosity remains finite in the critical region. On the other hand, we find that the bulk viscosity diverges as the correlation length squared, for N=1, whereas it remains finite for $N>1$.
Two-temperature transport coefficients of SF{sub 6}–N{sub 2} plasma
Energy Technology Data Exchange (ETDEWEB)
Yang, Fei; Chen, Zhexin; Wu, Yi, E-mail: wuyic51@mail.xjtu.edu.cn; Rong, Mingzhe; Wang, Chunlin [State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi' an Jiaotong University, Xi' an 710049 (China); Guo, Anxiang; Liu, Zirui [Electric Power Research Institute of State Grid Shaanxi Electric Power Company, Xian (China)
2015-10-15
Sulfur hexafluoride (SF{sub 6}) is widely adopted in electric power industry, especially in high-voltage circuit breakers and gas-insulated switchgear. However, the use of SF{sub 6} is limited by its high liquidation temperature and high global warming potential. Recently, research shows SF{sub 6}–N{sub 2} mixture, which shows environmental friendliness and good electrical properties, may be a feasible substitute for pure SF{sub 6}. This paper is devoted to the calculation of and transport coefficients of SF{sub 6}–N{sub 2} mixture under both LTE (local thermodynamic equilibrium) and non-LTE condition. The two–temperature mass action law was used to determine the composition. The transport coefficients were calculated by classical Chapman–Enskog method simplified by Devoto. The thermophysical properties are presented for electron temperatures of 300–40 000 K, ratios of electron to heavy species temperature of 1–10 and N{sub 2} mole fraction of 0%–100% at atmospheric pressure. The ionization processes under both LTE and non-LTE have been discussed. The results show that deviations from local thermodynamic equilibrium significantly affect the properties of SF{sub 6}–N{sub 2} plasma, especially before the plasma is fully ionized. The different influence of N{sub 2} on properties for SF{sub 6}–N{sub 2} plasma in and out of LTE has been found. The results will serve as reliable reference data for computational simulation of the behavior of SF{sub 6}–N{sub 2} plasmas.
Vollmayr-Lee, Katharina; Zippelius, Annette; Aspelmeier, Timo
2011-03-01
We study the dynamic structure factor of a granular fluid of hard spheres, driven into a stationary nonequilibrium state by balancing the energy loss due to inelastic collisions with the energy input due to driving. The driving is chosen to conserve momentum, so that fluctuating hydrodynamics predicts the existence of sound modes. We present results of computer simulations which are based on an event driven algorithm. The dynamic structure factor F (q , ω) is determined for volume fractions 0.05, 0.1 and 0.2 and coefficients of normal restitution 0.8 and 0.9. We observe sound waves, and compare our results for F (q , ω) with the predictions of generalized fluctuating hydrodynamics which takes into account that temperature fluctuations decay either diffusively or with a finite relaxation rate, depending on wave number and inelasticity. We determine the speed of sound and the transport coefficients and compare them to the results of kinetic theory. K.V.L. thanks the Institute of Theoretical Physics, University of Goettingen, for financial support and hospitality.
Lee, Jonghyun; Rolle, Massimo; Kitanidis, Peter K
2017-09-15
Most recent research on hydrodynamic dispersion in porous media has focused on whole-domain dispersion while other research is largely on laboratory-scale dispersion. This work focuses on the contribution of a single block in a numerical model to dispersion. Variability of fluid velocity and concentration within a block is not resolved and the combined spreading effect is approximated using resolved quantities and macroscopic parameters. This applies whether the formation is modeled as homogeneous or discretized into homogeneous blocks but the emphasis here being on the latter. The process of dispersion is typically described through the Fickian model, i.e., the dispersive flux is proportional to the gradient of the resolved concentration, commonly with the Scheidegger parameterization, which is a particular way to compute the dispersion coefficients utilizing dispersivity coefficients. Although such parameterization is by far the most commonly used in solute transport applications, its validity has been questioned. Here, our goal is to investigate the effects of heterogeneity and mass transfer limitations on block-scale longitudinal dispersion and to evaluate under which conditions the Scheidegger parameterization is valid. We compute the relaxation time or memory of the system; changes in time with periods larger than the relaxation time are gradually leading to a condition of local equilibrium under which dispersion is Fickian. The method we use requires the solution of a steady-state advection-dispersion equation, and thus is computationally efficient, and applicable to any heterogeneous hydraulic conductivity K field without requiring statistical or structural assumptions. The method was validated by comparing with other approaches such as the moment analysis and the first order perturbation method. We investigate the impact of heterogeneity, both in degree and structure, on the longitudinal dispersion coefficient and then discuss the role of local dispersion
Single-step chemistry model and transport coefficient model for hydrogen combustion
Institute of Scientific and Technical Information of China (English)
WANG ChangJian; WEN Jennifer; LU ShouXiang; GUO Jin
2012-01-01
To satisfy the needs of large-scale hydrogen combustion and explosion simulation,a method is presented to establish single-step chemistry model and transport model for fuel-air mixture.If the reaction formula for hydrogen-air mixture is H2+0.5O2→H2O,the reaction rate model is ω =1.13×1015[H2][O2]exp(-46.37T0/T) mol (cm3 s)-1,and the transport coefficient model is μ=K/Cp=pD=7.0×10-5T 0.7 g (cm s)-1.By using current models and the reference model to simulate steady Zeldovich-von Neumann-Doering (ZND) wave and free-propagating laminar flame,it is found that the results are well agreeable.Additionally,deflagration-to-detonation transition in an obstructed channel was also simulated.The numerical results are also well consistent with the experimental results.These provide a reasonable proof for current method and new models.
Tolos, Laura; Das, Santosh K
2016-01-01
We compute the transport coefficients (drag and momentum diffusion) of the low-lying heavy baryons $\\Lambda_c$ and $\\Lambda_b$ in a medium of light mesons formed at the later stages of high-energy heavy-ion collisions. We employ the Fokker-Planck approach to obtain the transport coefficients from unitarized baryon-meson interactions based on effective field theories that respect chiral and heavy-quark symmetries. We provide the transport coefficients as a function of temperature and heavy-baryon momentum, and analyze the applicability of certain non-relativistic estimates. Moreover we compare our outcome for the spatial diffusion coefficient to the one coming from the solution of the Boltzmann-Uehling-Uhlenbeck transport equation and we find a very good agreement between both calculations. The transport coefficients for $\\Lambda_c$ and $\\Lambda_b$ in a thermal bath will be used in a subsequent publication as input in a Langevin evolution code for the generation and propagation of heavy particles in heavy-ion ...
Einstein-Kubo-Helfand and McQuarrie relations for transport coefficients
Erpenbeck, Jerome J.
1995-05-01
The formal equivalence of the Green-Kubo and Einstein-Kubo-Helfand (EKH) expressions for transport coefficients is well known. For finite systems subject to periodic boundary conditions, the EKH relations are ambiguous as to whether the toroidal or infinite-checkerboard descriptions should be used for the coordinates. We first describe qualitatively the application of both descriptions to the calculation of the self-diffusion and shear viscosity coefficients. We then show that the calculation of the self-diffusion coefficient using the infinite-checkerboard EKH relation is equivalent to the Green-Kubo calculation, while the toroidal calculation is not. For shear viscosity, we find that neither the toroidal nor infinite-checkerboard calculation from the EKH relation is equivalent to the Green-Kubo calculation, even though the formal theory presumably suggests that each is correct when the long-time limit is taken after the limit of large-system size. An alternative relation for the shear viscosity of finite periodic systems is derived from the Green-Kubo formula, consisting of the infinite-checkerboard expression plus correction terms having a fundamentally more complicated dependence on the coordinates and momenta. A simple qualitative analysis of the system-size dependence of the difference between the time-dependent Green-Kubo and the infinite-checkerboard EKH shear viscosities [η(tN) and η(C)E(tN), respectively] shows this difference to be of O(N1/3) (N being the number of particles) at early times. Monte Carlo molecular dynamics calculations of η(C)E(tN) for an equimolar binary mixture of hard spheres (diameter ratio of 0.4 and mass ratio of 0.03) confirm these large differences at a few mean free times, but suggest a long-time plateau value having the magnitude of the Green-Kubo result, but the values at 70 mean free times do not approach η(tN) with increasing N. Finally, we consider the one-particle, EKH-like, McQuarrie expression for shear viscosity
Institute of Scientific and Technical Information of China (English)
魏修成; 陈天胜; 季玉新
2008-01-01
Based on the empirical Gardner equation describing the relationship between density and compressional wave velocity, the converted wave reflection coefficient extrema attributes for AVO analysis are proposed and the relations between the extrema position and amplitude, average velocity ratio across the interface, and shear wave reflection coefficient are derived. The extrema position is a monotonically decreasing function of average velocity ratio, and the extrema amplitude is a function of average velocity ratio and shear wave reflection coefficient. For theoretical models, the average velocity ratio and shear wave reflection coefficient are inverted from the extrema position and amplitude obtained from fitting a power function to converted wave AVO curves. Shear wave reflection coefficient sections have clearer physical meaning than conventional converted wave stacked sections and establish the theoretical foundation for geological structural interpretation and event correlation. 'The method of inverting average velocity ratio and shear wave reflection coefficient from the extrema position and amplitude obtained from fitting a power function is applied to real CCP gathers. The inverted average velocity ratios are consistent with those computed from compressional and shear wave well logs.
Hou, Yong; Fu, Yongsheng; Bredow, Richard; Kang, Dongdong; Redmer, Ronald; Yuan, Jianmin
2017-03-01
The average-atom model combined with the hyper-netted chain approximation is an efficient tool for electronic and ionic structure calculations for warm dense matter. Here we generalize this method in order to describe non-equilibrium states with different electron and ion temperature as produced in laser-matter interactions on ultra-short time scales. In particular, the electron-ion and ion-ion correlation effects are considered when calculating the electron structure. We derive an effective ion-ion pair-potential using the electron densities in the framework of temperature-depended density functional theory. Using this ion-ion potential we perform molecular dynamics simulations in order to determine the ionic transport properties such as the ionic diffusion coefficient and the shear viscosity through the ionic velocity autocorrelation functions.
Moroz, Oleg N
2011-01-01
The shear and the bulk viscosities of the hadron gas at low temperatures are studied in the model with constant elastic cross sections being relativistic generalization of the hard spheres model. One effective radius ${r=0.4 fm}$ is chosen for all elastic collisions. Only elastic collisions are considered which are supposed to be dominant at temperatures ${T\\leq 120-140 MeV}$. The calculations are done in the framework of the Boltzmann equation with the Boltzmann statistics distribution functions and the ideal gas equation of state. The applicability of these approximations is discussed. It's found that the bulk viscosity of the hadron gas is much larger than the bulk viscosity of the pion gas while the shear viscosity is found to be less sensitive to the mass spectrum of hadrons. The constant cross sections and the Boltzmann statistics approximation allows one not only to conduct precise numerical calculations of transport coefficients in the hadron gas but also to obtain some relatively simple relativistic ...
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
It has been proved that there exists a cross coupling between vertical heat turbulent transport and vertical velocity by using linear thermodynamics. This result asserts that the vertical component of heat turbulent transport flux is composed of both the transport of the vertical potential temperature gralient and the coupling transport of the vertical velocity. In this paper, the coupling effect of vertical velocity on vertical heat turbulent transportation is validated by using observed data from the atmospheric boundary layer to determine cross coupling coefficients, and a series of significant properties of turbulent transportation are opened out. These properties indicate that the cross coupling coefficient is a logarithm function of the dimensionless vertical velocity and dimensionless height, and is not only related to the friction velocity u*,but also to the coupling roughness height zwo and the coupling temperature Two of the vertical velocity.In addition, the function relations suggest that only when the vertical velocity magnitude conforms to the limitation |W/u* | ≠ 1, and is above the level zwo, then the vertical velocity leads to the cross coupling effect on the vertical heat turbulent transport flux. The cross coupling theory and experimental results provide a challenge to the traditional turbulent K closure theory and the Monin-Obukhov similarity theory.
Energy Technology Data Exchange (ETDEWEB)
Zhaoyuan Liu; Kord Smith; Benoit Forget; Javier Ortensi
2016-05-01
A new method for computing homogenized assembly neutron transport cross sections and dif- fusion coefficients that is both rigorous and computationally efficient is proposed in this paper. In the limit of a homogeneous hydrogen slab, the new method is equivalent to the long-used, and only-recently-published CASMO transport method. The rigorous method is used to demonstrate the sources of inaccuracy in the commonly applied “out-scatter” transport correction. It is also demonstrated that the newly developed method is directly applicable to lattice calculations per- formed by Monte Carlo and is capable of computing rigorous homogenized transport cross sections for arbitrarily heterogeneous lattices. Comparisons of several common transport cross section ap- proximations are presented for a simple problem of infinite medium hydrogen. The new method has also been applied in computing 2-group diffusion data for an actual PWR lattice from BEAVRS benchmark.
Determination of effective heat transport coefficients for wall-cooled packed beds
Borkink, J.G.H.; Borkink, J.G.H.; Westerterp, K.R.
1992-01-01
The influence is studied of several assumptions, often made in literature, on the values for the effective radial heat conductivity, wall heat transfer coefficient and overall heat transfer coefficient, as obtained from experiments in wall-cooled packed beds without a chemical reaction. Especially t
Directory of Open Access Journals (Sweden)
Na Liu
2015-10-01
Full Text Available Hadron production in semi-inclusive deep-inelastic scattering of leptons from nuclei is an ideal tool to determine and constrain the transport coefficient in cold nuclear matter. The leading-order computations for hadron multiplicity ratios are performed by means of the SW quenching weights and the analytic parameterizations of quenching weights based on BDMPS formalism. The theoretical results are compared to the HERMES positively charged pions production data with the quarks hadronization occurring outside the nucleus. With considering the nuclear geometry effect on hadron production, our predictions are in good agreement with the experimental measurements. The extracted transport parameter from the global fit is shown to be qˆ=0.74±0.03 GeV2/fm for the SW quenching weight without the finite energy corrections. As for the analytic parameterization of BDMPS quenching weight without the quark energy E dependence, the computed transport coefficient is qˆ=0.20±0.02 GeV2/fm. It is found that the nuclear geometry effect has a significant impact on the transport coefficient in cold nuclear matter. It is necessary to consider the detailed nuclear geometry in studying the semi-inclusive hadron production in deep inelastic scattering on nuclear targets.
Kustova, Elena V.; Kremer, Gilberto M.
2015-09-01
Shear viscosity coefficient is calculated for both equilibrium and strongly non-equilibrium state-to-state vibrational distributions taking into account increasing diameters of vibrationally excited molecules. Under conditions of local thermal equilibrium, the effect of vibrational excitation on the shear viscosity coefficient is found to be negligible for temperatures below 5000 K. For T > 10 000 K, the contribution of excited states becomes important. Under non-equilibrium conditions characteristic for shock heated and supersonic expanding flows vibrational level populations deviate strongly from the Boltzmann distribution. Nevertheless, estimated coupled effect of molecular size and non-Boltzmann distributions on the shear viscosity coefficient is negligible.
A statistical study of gyro-averaging effects in a reduced model of drift-wave transport
da Fonseca, J. D.; del-Castillo-Negrete, D.; Sokolov, I. M.; Caldas, I. L.
2016-08-01
A statistical study of finite Larmor radius (FLR) effects on transport driven by electrostatic drift-waves is presented. The study is based on a reduced discrete Hamiltonian dynamical system known as the gyro-averaged standard map (GSM). In this system, FLR effects are incorporated through the gyro-averaging of a simplified weak-turbulence model of electrostatic fluctuations. Formally, the GSM is a modified version of the standard map in which the perturbation amplitude, K0, becomes K0J0(ρ ̂ ) , where J0 is the zeroth-order Bessel function and ρ ̂ is the Larmor radius. Assuming a Maxwellian probability density function (pdf) for ρ ̂ , we compute analytically and numerically the pdf and the cumulative distribution function of the effective drift-wave perturbation amplitude K0J0(ρ ̂ ) . Using these results, we compute the probability of loss of confinement (i.e., global chaos), Pc, and the probability of trapping in the main drift-wave resonance, Pt. It is shown that Pc provides an upper bound for the escape rate, and that Pt provides a good estimate of the particle trapping rate. The analytical results are compared with direct numerical Monte-Carlo simulations of particle transport.
DEPTH-AVERAGED 2-D CALCULATION OF TIDAL FLOW,SALINITY AND COHESIVE SEDIMENT TRANSPORT IN ESTUARIES
Institute of Scientific and Technical Information of China (English)
Weiming WU; Sam S.Y. WANG
2004-01-01
A depth-averaged 2-D numerical model for unsteady flow, salinity and cohesive sediment transport in estuaries is established using the finite volume method on the non-staggered, curvilinear grid. The convection terms are discretized by upwind schemes, the diffusion terms are by the central difference scheme, and the time derivative terms are by the three-time-level implicit scheme. The coupling of flow velocity and water level in the 2-D shallow water equations is achieved by the SIMPLEC algorithm with the Rhie and Chow's momentum interpolation method. The sediment model calculates the settling, deposition, erosion and transport of cohesive sediment, taking into account the influence of sediment size, sediment concentration, salinity and turbulence intensity on the flocculation of cohesive sediment. The flow model is first tested against the measurement data in the Tokyo Bay and San Francisco Bay, showing good agreements. And then, the entire model of flow, salinity and sediment transport is verified in the Gironde Estuary. The water elevation, flow velocity, salinity and sediment concentration are well predicted.
Coarse-grained transport of a turbulent flow via moments of the Reynolds-averaged Boltzmann equation
Abramov, Rafail V
2015-01-01
Here we introduce new coarse-grained variables for a turbulent flow in the form of moments of its Reynolds-averaged Boltzmann equation. With the exception of the collision moments, the transport equations for the new variables are identical to the usual moment equations, and thus naturally lend themselves to the variety of already existing closure methods. Under the anelastic turbulence approximation, we derive equations for the Reynolds-averaged turbulent fluctuations around the coarse-grained state. We show that the global relative entropy of the coarse-grained state is bounded from above by the Reynolds average of the fine-grained global relative entropy, and thus obeys the time decay bound of Desvillettes and Villani. This is similar to what is observed in the rarefied gas dynamics, which makes the Grad moment closure a good candidate for truncating the hierarchy of the coarse-grained moment equations. We also show that, under additional assumptions on the form of the coarse-grained collision terms, one a...
Vermorel, Romain; Oulebsir, Fouad; Galliero, Guillaume
2017-09-01
The computation of diffusion coefficients in molecular systems ranks among the most useful applications of equilibrium molecular dynamics simulations. However, when dealing with the problem of fluid diffusion through vanishingly thin interfaces, classical techniques are not applicable. This is because the volume of space in which molecules diffuse is ill-defined. In such conditions, non-equilibrium techniques allow for the computation of transport coefficients per unit interface width, but their weak point lies in their inability to isolate the contribution of the different physical mechanisms prone to impact the flux of permeating molecules. In this work, we propose a simple and accurate method to compute the diffusional transport coefficient of a pure fluid through a planar interface from equilibrium molecular dynamics simulations, in the form of a diffusion coefficient per unit interface width. In order to demonstrate its validity and accuracy, we apply our method to the case study of a dilute gas diffusing through a smoothly repulsive single-layer porous solid. We believe this complementary technique can benefit to the interpretation of the results obtained on single-layer membranes by means of complex non-equilibrium methods.
Fiorentini, Mattia; Bonini, Nicola
2016-08-01
We present a first-principles computational approach to calculate thermoelectric transport coefficients via the exact solution of the linearized Boltzmann transport equation, also including the effect of nonequilibrium phonon populations induced by a temperature gradient. We use density functional theory and density functional perturbation theory for an accurate description of the electronic and vibrational properties of a system, including electron-phonon interactions; carriers' scattering rates are computed using standard perturbation theory. We exploit Wannier interpolation (both for electronic bands and electron-phonon matrix elements) for an efficient sampling of the Brillouin zone, and the solution of the Boltzmann equation is achieved via a fast and stable conjugate gradient scheme. We discuss the application of this approach to n -doped silicon. In particular, we discuss a number of thermoelectric properties such as the thermal and electrical conductivities of electrons, the Lorenz number and the Seebeck coefficient, including the phonon drag effect, in a range of temperatures and carrier concentrations. This approach gives results in good agreement with experimental data and provides a detailed characterization of the nature and the relative importance of the individual scattering mechanisms. Moreover, the access to the exact solution of the Boltzmann equation for a realistic system provides a direct way to assess the accuracy of different flavors of relaxation time approximation, as well as of models that are popular in the thermoelectric community to estimate transport coefficients.
Tinoco, R. O.; Goldstein, E. B.; Coco, G.
2016-12-01
We use a machine learning approach to seek accurate, physically sound predictors, to estimate two relevant flow parameters for open-channel vegetated flows: mean velocities and drag coefficients. A genetic programming algorithm is used to find a robust relationship between properties of the vegetation and flow parameters. We use data published from several laboratory experiments covering a broad range of conditions to obtain: a) in the case of mean flow, an equation that matches the accuracy of other predictors from recent literature while showing a less complex structure, and b) for drag coefficients, a predictor that relies on both single element and array parameters. We investigate different criteria for dataset size and data selection to evaluate their impact on the resulting predictor, as well as simple strategies to obtain only dimensionally consistent equations, and avoid the need for dimensional coefficients. The results show that a proper methodology can deliver physically sound models representative of the processes involved, such that genetic programming and machine learning techniques can be used as powerful tools to study complicated phenomena and develop not only purely empirical, but "hybrid" models, coupling results from machine learning methodologies into physics-based models.
Directory of Open Access Journals (Sweden)
Ma. D. Andrade Gregori
2006-05-01
Full Text Available En el trabajo se fundamentan los mecanismos de transporte de humedad que tienen lugar en almacenes soterrados dadas lascaracterísticas climáticas y geohidrològicas de Cuba. Se establece una analogía con la ley de Fick y se propone un modeloteórico que describe este mecanismo de transporte hacia las cavidades. Se determinó experimentalmente los coeficienteslocales de transporte de humedad para diferentes tipos de recubrimiento en paredes y diferentes formas geométricas de losalmacenes.Palabras claves: Almacenes, soterrado, humedad, conservación, coeficientes._______________________________________________________________________________Abstract.In this paper the mechanisms of humidity transport are explained. These mechanisms have place in underground warehousesaccording to the climatic and geohydrological characteristics of Cuba. An analogy with the Fick´s law is stated and it intends atheoretical model that describes this mechanism of transport toward the cavities. It was determined the local coefficients oftransport of humidity experimentally for different recover types in walls and different geometric forms of the warehouses.Key words: Store, buried, humidity, conservation, and coefficients.
Chen, Feier; Tian, Kang; Ding, Xiaoxu; Miao, Yuqi; Lu, Chunxia
2016-11-01
Analysis of freight rate volatility characteristics attracts more attention after year 2008 due to the effect of credit crunch and slowdown in marine transportation. The multifractal detrended fluctuation analysis technique is employed to analyze the time series of Baltic Dry Bulk Freight Rate Index and the market trend of two bulk ship sizes, namely Capesize and Panamax for the period: March 1st 1999-February 26th 2015. In this paper, the degree of the multifractality with different fluctuation sizes is calculated. Besides, multifractal detrending moving average (MF-DMA) counting technique has been developed to quantify the components of multifractal spectrum with the finite-size effect taken into consideration. Numerical results show that both Capesize and Panamax freight rate index time series are of multifractal nature. The origin of multifractality for the bulk freight rate market series is found mostly due to nonlinear correlation.
Huang, Xianli; Morita, Shigeru; Oishi, Tetsutarou; Murakami, Izumi; Goto, Motoshi; Zhang, Hongming; Liu, Yang
2016-10-01
With impurity pellet injection and a one-dimensional transport code, the transport of Al and Fe ions has been analyzed in the Large Helical Device (LHD) based on extreme ultraviolet (EUV) space-resolved spectroscopy. The total density of Fe ions in the plasma core has been analyzed from the radial profiles of the Fe n =3-2 Lα emissions. When the ne profile is peaked or hollow, the Fe density also exhibits a peaked or hollow profile, respectively. Fe transport analysis shows that the convective velocity (V) is outward in the plasma core and inward near the edge when the ne profile is hollow. On the other hand, the V takes negative value over the whole radial range in the peaked ne profile. Therefore, the different Fe density profiles between peaked and hollow ne profiles can be explained by the significant difference in the V profile. Comparison of the transport coefficients between Al and Fe shows the magnitude of V for Al ions seems to be smaller than that for Fe ions while the difference in the diffusion coefficient profile is not significant. The difference in the decay time of line emissions between the two speices is attributed to the weaker convection for the Al.
A statistical study of gyro-averaging effects in a reduced model of drift-wave transport
da Fonseca, J D; Sokolov, M; Caldas, I L
2016-01-01
A statistical study of finite Larmor radius (FLR) effects on transport driven by electrostatic drift-waves is presented. The study is based on a reduced discrete Hamiltonian dynamical system known as the gyro-averaged standard map (GSM). In this system, FLR effects are incorporated through the gyro-averaging of a simplified weak-turbulence model of electrostatic fluctuations. Formally, the GSM is a modified version of the standard map in which the perturbation amplitude, $K_0$, becomes $K_0 J_0(\\hat{\\rho})$, where $J_0$ is the zeroth-order Bessel function and $\\hat{\\rho}$ is the Larmor radius. Assuming a Maxwellian probability density function (pdf) for $\\hat{\\rho}$, we compute analytically and numerically the pdf and the cumulative distribution function of the effective drift-wave perturbation amplitude $K_0 J_0(\\hat{\\rho})$. Using these results we compute the probability of loss of confinement (i.e., global chaos), $P_{c}$, and the probability of trapping in the main drift-wave resonance, $P_{t}$. It is sho...
Chaynikov, S.; Porta, G.; Riva, M.; Guadagnini, A.
2012-04-01
We focus on a theoretical analysis of nonreactive solute transport in porous media through the volume averaging technique. Darcy-scale transport models based on continuum formulations typically include large scale dispersive processes which are embedded in a pore-scale advection diffusion equation through a Fickian analogy. This formulation has been extensively questioned in the literature due to its inability to depict observed solute breakthrough curves in diverse settings, ranging from the laboratory to the field scales. The heterogeneity of the pore-scale velocity field is one of the key sources of uncertainties giving rise to anomalous (non-Fickian) dispersion in macro-scale porous systems. Some of the models which are employed to interpret observed non-Fickian solute behavior make use of a continuum formulation of the porous system which assumes a two-region description and includes a bimodal velocity distribution. A first class of these models comprises the so-called ''mobile-immobile'' conceptualization, where convective and dispersive transport mechanisms are considered to dominate within a high velocity region (mobile zone), while convective effects are neglected in a low velocity region (immobile zone). The mass exchange between these two regions is assumed to be controlled by a diffusive process and is macroscopically described by a first-order kinetic. An extension of these ideas is the two equation ''mobile-mobile'' model, where both transport mechanisms are taken into account in each region and a first-order mass exchange between regions is employed. Here, we provide an analytical derivation of two region "mobile-mobile" meso-scale models through a rigorous upscaling of the pore-scale advection diffusion equation. Among the available upscaling methodologies, we employ the Volume Averaging technique. In this approach, the heterogeneous porous medium is supposed to be pseudo-periodic, and can be represented through a (spatially) periodic unit cell
Directory of Open Access Journals (Sweden)
Sundus Hussein Abd
2012-01-01
Full Text Available In this research, an experimental study was conducted to high light the impact of the exterior shape of a cylindrical body on the forced and free convection heat transfer coefficients when the body is hold in the entrance of an air duct. The impact of changing the body location within the air duct and the air speed are also demonstrated. The cylinders were manufactured with circular, triangular and square sections of copper for its high thermal conductivity with appropriate dimensions, while maintaining the surface area of all shapes to be the same. Each cylinder was heated to a certain temperature and put inside the duct at certain locations. The temperature of the cylinder was then monitored. The heat transfer coefficient were then calculated for forced convection for several Reynolds number (4555-18222.The study covered free convection impact for values of Rayleigh number ranging between (1069-3321. Imperical relationships were obtained for all cases of forced and free convection and compared with equations of circular cylindrical shapes found in literature. These imperical equations were found to be in good comparison with that of other sources.
Parsafar, G. A.; Shokouhi, M.
A new hard-core potential model was recently used to calculate thermodynamic properties of some model fluids, including equilibrium properties, such as compressibility factor and internal energy. A Lennard-Jones (LJ) like potential has been used to modify the repulsive part of the potential. The modified potential contains five parameters, namely, α, R, ɛ, σ, and σHS. The parameter α is the tail of the attractive branch whose value changes from zero to one. In this work, we have chosen α = 1 to make the potential continuous at separation r = Rσ, where the parameter R is the well width. R lies in the range 1.2 to 2.5, and R = 1.3 was found to be the best value for all real gases studied. The parameter ɛ is the well depth of potential function, and σ is the separation at which the potential function is zero. σHS is the effective hard sphere diameter, which depends on temperature and an additional parameter. Using statistical mechanics along with the Boltzmann factor criterion (BFC) for the effective hard sphere diameter, an analytical expression has been derived for the reduced second virial coefficient in terms of the reduced temperature. Fitting experimental data to expression derived for the second virial coefficient, the potential parameters ɛ and σ are obtained. Since this potential is spherical (depending only on distance), three types of species are chosen, namely Ar and He (monoatomic), N2and O2 (diatomic), and methane (spherical molecule), to show how appropriate this potential model is for them. This model predicts an inversion temperature for the second virial coefficient (temperature at which the second virial coefficient pass through a maximum) at ILM0001, where T1 is the inversion temperature, and TB is the Boyle temperature. The predicted value is better than that of the L-J model (for which ILM0002). The maximum percentage deviation of the second virial coefficient is about 2%, except around the Boyle temperature. Then the transport
Energy Technology Data Exchange (ETDEWEB)
Sieres, Jaime; Fernandez-Seara, Jose [University of Vigo, Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, Vigo (Spain)
2008-08-15
The ammonia purification process is critical in ammonia-water absorption refrigeration systems. In this paper, a detailed and a simplified analytical model are presented to characterize the performance of the ammonia rectification process in packed columns. The detailed model is based on mass and energy balances and simultaneous heat and mass transfer equations. The simplified model is derived and compared with the detailed model. The range of applicability of the simplified model is determined. A calculation procedure based on the simplified model is developed to determine the volumetric mass transfer coefficients in the vapour phase from experimental data. Finally, the proposed model and other simple calculation methods found in the general literature are compared. (orig.)
Calculation of transport coefficient profiles in modulation experiments as an inverse problem
Escande, D F
2011-01-01
The calculation of transport profiles from experimental measurements belongs in the category of inverse problems which are known to come with issues of ill-conditioning or singularity. A reformulation of the calculation, the matricial approach, is proposed for periodically modulated experiments, within the context of the standard advection-diffusion model where these issues are related to the vanishing of the determinant of a 2x2 matrix. This sheds light on the accuracy of calculations with transport codes, and provides a path for a more precise assessment of the profiles and of the related uncertainty.
Determining Transport Coefficients for a Microscopic Simulation of a Hadron Gas
Pratt, Scott; Kim, Jane
2016-01-01
Quark-Gluon plasmas produced in relativistic heavy-ion collisions quickly expand and cool, entering a phase consisting of multiple interacting hadronic resonances just below the QCD deconfinement temperature, $T\\sim 155$ MeV. Numerical microscopic simulations have emerged as the principal method for modeling the behavior of the hadronic stage of heavy-ion collisions, but the transport properties that characterize these simulations are not well understood. Methods are presented here for extracting the shear viscosity, and two transport parameters that emerge in Israel-Stewart hydrodynamics. The analysis is based on studying how the stress-energy tensor responds to velocity gradients. Results agree with expectations based on Kubo relations.
Flechner, S. G.; Jacobs, P. F.
1978-01-01
Results of wind tunnel investigations of four jet transport configurations representing both narrow and wide-body configurations and also a future advanced aerodynamic configuration are presented including performance and wing root bending moment data. The effects of winglets on the aerodynamic characteristics throughout the flight envelope were studied. The results indicate that winglets improved the cruise lift to drag ratio between 4 and 8 percent, depending on the transport configuration. The data also indicate that ratios of relative aerodynamic gain to relative structural weight penalty for winglets are 1.5 to 2.5 times those for wing-tip extensions. Over the complete range of flight conditions, winglets produce no adverse effects on buffet onset, lateral-directional stability, and aileron control effectiveness.
Energy Technology Data Exchange (ETDEWEB)
Ono, Shizuca; Vieira, Wilson J.; Garcia, Roberto D.M. [Centro Tecnico Aeroespacial (CTA-IEAv), Sao Jose dos Campos, SP (Brazil). Inst. de Estudos Avancados
2000-07-01
In this work, the use of multigroup albedo coefficients in Monte Carlo calculations of particle reflection and transmission by ducts is investigated. The procedure consists in modifying the MCNP code so that an albedo matrix computed previously by deterministic methods or Monte Carlo is introduced into the program to describe particle reflection by a surface. This way it becomes possible to avoid the need of considering particle transport in the duct wall explicitly, changing the problem to a problem of transport in the duct interior only and reducing significantly the difficulty of the real problem. The probability of particle reflection at the duct wall is given, for each group, as the sum of the albedo coefficients over the final groups. The calculation is started by sampling a source particle and simulating its reflection on the duct wall by sampling a group for the emerging particle. The particle weight is then reduced by the reflection probability. Next, a new direction and trajectory for the particle is selected. Numerical results obtained for the model are compared with results from a discrete ordinates code and results from Monte Carlo simulations that take particle transport in the wall into account. (author)
Energy Technology Data Exchange (ETDEWEB)
Huang, Lei; Fang, Hongwei; Xu, Xingya; He, Guojian; Zhang, Xuesong; Reible, Danny
2017-08-01
Phosphorus (P) fate and transport plays a crucial role in the ecology of rivers and reservoirs in which eutrophication is limited by P. A key uncertainty in models used to help manage P in such systems is the partitioning of P to suspended and bed sediments. By analyzing data from field and laboratory experiments, we stochastically characterize the variability of the partition coefficient (Kd) and derive spatio-temporal solutions for P transport in the Three Gorges Reservoir (TGR). We formulate a set of stochastic partial different equations (SPDEs) to simulate P transport by randomly sampling Kd from the measured distributions, to obtain statistical descriptions of the P concentration and retention in the TGR. The correspondence between predicted and observed P concentrations and P retention in the TGR combined with the ability to effectively characterize uncertainty suggests that a model that incorporates the observed variability can better describe P dynamics and more effectively serve as a tool for P management in the system. This study highlights the importance of considering parametric uncertainty in estimating uncertainty/variability associated with simulated P transport.
Transport coefficients for a confined Brownian ratchet operating between two heat reservoirs
Ryabov, A.; Holubec, V.; Yaghoubi, M. H.; Varga, M.; Foulaadvand, M. E.; Chvosta, P.
2016-09-01
We discuss two-dimensional diffusion of a Brownian particle confined to a periodic asymmetric channel with soft walls modeled by a parabolic potential. In the channel, the particle experiences different thermal noise intensities, or temperatures, in the transversal and longitudinal directions. The model is inspired by the famous Feynman’s ratchet and pawl. Although the standard Fick-Jacobs approximation predicts correctly the effective diffusion coefficient, it fails to capture the ratchet effect. Deriving a correction, which breaks the local detailed balance with the transversal noise source, we obtain a correct mean velocity of the particle and a stationary probability density in the potential unit cell. The derived results are exact for small channel width. Yet, we check by exact numerical calculation that they qualitatively describe the ratchet effect observed for an arbitrary width of the channel.
Energy Technology Data Exchange (ETDEWEB)
Zhang, JunMin, E-mail: jmzhang@buaa.edu.cn, E-mail: guanyg@tsinghua.edu.cn; Lu, ChunRong [School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191 (China); Guan, YongGang, E-mail: jmzhang@buaa.edu.cn, E-mail: guanyg@tsinghua.edu.cn; Liu, WeiDong [Department of Electrical Engineering, Tsinghua University, Beijing 100084 (China)
2015-10-15
Because the fault arc in aircraft electrical system often causes a fire, it is particularly important to analyze its energy and transfer for aircraft safety. The calculation of arc energy requires the basic parameters of the arc. This paper is mainly devoted to the calculations of equilibrium composition, thermodynamic properties (density, molar weight, enthalpy, and specific heat at constant pressure) and transport coefficients (thermal conductivity, electrical conductivity, and viscosity) of plasmas produced by a mixture of air, Cu, and polytetrafluoroethylene under the condition of local thermodynamic equilibrium. The equilibrium composition is determined by solving a system of equations around the number densities of each species. The thermodynamic properties are obtained according to the standard thermodynamic relationships. The transport coefficients are calculated using the Chapman-Enskog approximations. Results are presented in the temperature range from 3000 to 30 000 K for pressures of 0.08 and 0.1 MPa, respectively. The results are more accurate and are reliable reference data for theoretical analysis and computational simulation of the behavior of fault arc.
Energy Technology Data Exchange (ETDEWEB)
Lee, Hyun Jeong; Kwon, Jung Hwan [Div. of Environmental Science and Ecological Engineering, Korea University, Seoul (Korea, Republic of)
2016-10-15
Various alternative flame retardants are used in many countries since polybrominated diphenyl ethers (PBDEs) were classified as persistent organic pollutants (POPs). However, difficulties in the evaluation of the long-range transport potential (LRTP) of the alternatives are related to the lack of information on their physicochemical properties, which govern their environmental fates and transport. Based on the simulation of LRTP using OECD P{sub OV} and LRTP Screening Tool, five alternative brominated flame retardants (BFRs) (hexabromobenzene [HBB], 2,3,4,5,6-pentabromotoluene [PBT], 2,3,4,5,6-pentabromoethylbenzene [PBEB], 2-ethylhexyl 2,3,4,5-tetrabromobenzoate [TBB], and 1,2,4,5-tetrabromo-3,6-dimethylbenzene [TBX]), and 3 PBDEs (BDE-28, BDE-47, and BDE-99) were chosen to perform a refined assessment. This was done using an experimentally measured 1-octanol–air partition coefficient (K{sub OA}) for the calculation of the air–water partition coefficient (K{sub AW}) required for the model. The four selected alternative BFRs (HBB, PBT, PBEB, TBX) have K{sub OA} values close to the in silico estimation used in the screening evaluation. On the other hand, the measured K{sub OA} value for TBB was two orders of magnitude lower than the estimated value used in the screening simulation. The refined simulation showed that characteristic travel distance (CTD) and transfer efficiency (TE) for HBB, PBT, PBEB, and TBX were greater than those for BDE-28, whereas CTD and TE for TBB were lower than those for BDE-28. This suggested that TBB has a lower LRTP than BDE-28, considering the refined partition coefficients.
Experimental determination of the Onsager coefficients of transport for Ce0.8Pr0.2O2−δ
DEFF Research Database (Denmark)
Chatzichristodoulou, Christodoulos; Park, Woo-Seok; Kim, Hong-Seok;
2010-01-01
the aO2 range 10−21–1 at 800 °C, using local ionic and electronic probes in a four-probe configuration. The cross coefficients of transport were found to be negligible in comparison to the direct coefficients in the aO2 range 10−21–10−4, but of the same order of magnitude as the direct coefficients...
Suk, Heejun
2016-08-01
This paper presents a semi-analytical procedure for solving coupled the multispecies reactive solute transport equations, with a sequential first-order reaction network on spatially or temporally varying flow velocities and dispersion coefficients involving distinct retardation factors. This proposed approach was developed to overcome the limitation reported by Suk (2013) regarding the identical retardation values for all reactive species, while maintaining the extensive capability of the previous Suk method involving spatially variable or temporally variable coefficients of transport, general initial conditions, and arbitrary temporal variable inlet concentration. The proposed approach sequentially calculates the concentration distributions of each species by employing only the generalized integral transform technique (GITT). Because the proposed solutions for each species' concentration distributions have separable forms in space and time, the solution for subsequent species (daughter species) can be obtained using only the GITT without the decomposition by change-of-variables method imposing the limitation of identical retardation values for all the reactive species by directly substituting solutions for the preceding species (parent species) into the transport equation of subsequent species (daughter species). The proposed solutions were compared with previously published analytical solutions or numerical solutions of the numerical code of the Two-Dimensional Subsurface Flow, Fate and Transport of Microbes and Chemicals (2DFATMIC) in three verification examples. In these examples, the proposed solutions were well matched with previous analytical solutions and the numerical solutions obtained by 2DFATMIC model. A hypothetical single-well push-pull test example and a scale-dependent dispersion example were designed to demonstrate the practical application of the proposed solution to a real field problem.
Riccardi, Keith; Li, Zhenhong; Brown, Janice A; Gorgoglione, Matthew F; Niosi, Mark; Gosset, James; Huard, Kim; Erion, Derek M; Di, Li
2016-10-01
Unbound partition coefficient (Kpuu) is important to an understanding of the asymmetric free drug distribution of a compound between cells and medium in vitro, as well as between tissue and plasma in vivo, especially for transporter-mediated processes. Kpuu was determined for a set of compounds from the SLC13A family that are inhibitors and substrates of transporters in hepatocytes and transporter-transfected cell lines. Enantioselectivity was observed, with (R)-enantiomers achieving much higher Kpuu (>4) than the (S)-enantiomers (<1) in human hepatocytes and SLC13A5-transfected human embryonic 293 cells. The intracellular free drug concentration correlated directly with in vitro pharmacological activity rather than the nominal concentration in the assay because of the high Kpuu mediated by SLC13A5 transporter uptake. Delivery of the diacid PF-06649298 directly or via hydrolysis of the ethyl ester prodrug PF-06757303 resulted in quite different Kpuu values in human hepatocytes (Kpuu of 3 for diacid versus 59 for prodrug), which was successfully modeled on the basis of passive diffusion, active uptake, and conversion rate from ester to diacid using a compartmental model. Kpuu values changed with drug concentrations; lower values were observed at higher concentrations possibly owing to a saturation of transporters. Michaelis-Menten constant (Km) of SLC13A5 was estimated to be 24 μM for PF-06649298 in human hepatocytes. In vitro Kpuu obtained from rat suspension hepatocytes supplemented with 4% fatty acid free bovine serum albumin showed good correlation with in vivo Kpuu of liver-to-plasma, illustrating the potential of this approach to predict in vivo Kpuu from in vitro systems.
Energy Technology Data Exchange (ETDEWEB)
Wang, Hsin [ORNL; Porter, Wallace D [ORNL; Bottner, Harold [Fraunhofer-Institute, Freiburg, Germany; Konig, Jan [Fraunhofer-Institute, Freiburg, Germany; Chen, Lidong [Chinese Academy of Sciences; Bai, Shengqiang [Chinese Academy of Sciences; Tritt, Terry M. [Clemson University; Mayolett, Alex [Corning, Inc; Senawiratne, Jayantha [Corning, Inc; Smith, Charlene [Corning, Inc; Harris, Fred [ZT-Plus; Gilbert, Partricia [Marlow Industries, Inc; Sharp, Jeff [Marlow Industries, Inc; Lo, Jason [CANMET - Materials Technology Laboratory, Natural Resources of Canada; Keinke, Holger [University of Waterloo, Canada; Kiss, Laszlo I. [University of Quebec at Chicoutimi
2013-01-01
Recent research and development of high temperature thermoelectric materials has demonstrated great potential of converting automobile exhaust heat directly into electricity. Thermoelectrics based on classic bismuth telluride have also started to impact the automotive industry by enhancing air conditioning efficiency and integrated cabin climate control. In addition to engineering challenges of making reliable and efficient devices to withstand thermal and mechanical cycling, the remaining issues in thermoelectric power generation and refrigeration are mostly materials related. The figure-of-merit, ZT, still needs to improve from the current value of 1.0 - 1.5 to above 2 to be competitive to other alternative technologies. In the meantime, the thermoelectric community could greatly benefit from the development of international test standards, improved test methods and better characterization tools. Internationally, thermoelectrics have been recognized by many countries as an important area for improving energy efficiency. The International Energy Agency (IEA) group under the implementing agreement for Advanced Materials for Transportation (AMT) identified thermoelectric materials as an important area in 2009. This paper is Part I of the international round-robin testing of transport properties of bulk thermoelectrics. The main focuses in Part I are on two electronic transport properties: Seebeck coefficient and electrical resistivity.
Wang, Hsin; Porter, Wallace D.; Böttner, Harald; König, Jan; Chen, Lidong; Bai, Shengqiang; Tritt, Terry M.; Mayolet, Alex; Senawiratne, Jayantha; Smith, Charlene; Harris, Fred; Gilbert, Patricia; Sharp, Jeff W.; Lo, Jason; Kleinke, Holger; Kiss, Laszlo
2013-04-01
Recent research and development of high-temperature thermoelectric materials has demonstrated great potential for converting automobile exhaust heat directly into electricity. Thermoelectrics based on classic bismuth telluride have also started to impact the automotive industry by enhancing air-conditioning efficiency and integrated cabin climate control. In addition to engineering challenges of making reliable and efficient devices to withstand thermal and mechanical cycling, the remaining issues in thermoelectric power generation and refrigeration are mostly materials related. The dimensionless figure of merit, ZT, still needs to be improved from the current value of 1.0 to 1.5 to above 2.0 to be competitive with other alternative technologies. In the meantime, the thermoelectric community could greatly benefit from the development of international test standards, improved test methods, and better characterization tools. Internationally, thermoelectrics have been recognized by many countries as a key component for improving energy efficiency. The International Energy Agency (IEA) group under the Implementing Agreement for Advanced Materials for Transportation (AMT) identified thermoelectric materials as an important area in 2009. This paper is part I of the international round-robin testing of transport properties of bulk thermoelectrics. The main foci in part I are the measurement of two electronic transport properties: Seebeck coefficient and electrical resistivity.
Transport coefficients and mechanical response in hard-disk colloidal suspensions
Zhang, Bo-Kai; Li, Jian; Chen, Kang; Tian, Wen-De; Ma, Yu-Qiang
2016-11-01
We investigate the transport properties and mechanical response of glassy hard disks using nonlinear Langevin equation theory. We derive expressions for the elastic shear modulus and viscosity in two dimensions on the basis of thermal-activated barrier-hopping dynamics and mechanically accelerated motion. Dense hard disks exhibit phenomena such as softening elasticity, shear-thinning of viscosity, and yielding upon deformation, which are qualitatively similar to dense hard-sphere colloidal suspensions in three dimensions. These phenomena can be ascribed to stress-induced “landscape tilting”. Quantitative comparisons of these phenomena between hard disks and hard spheres are presented. Interestingly, we find that the density dependence of yield stress in hard disks is much more significant than in hard spheres. Our work provides a foundation for further generalizing the nonlinear Langevin equation theory to address slow dynamics and rheological behavior in binary or polydisperse mixtures of hard or soft disks. Project supported by the National Basic Research Program of China (Grant No. 2012CB821500) and the National Natural Science Foundation of China (Grant Nos. 21374073 and, 21574096).
Garland, Gregory Ellis
The temperature dependence of transport properties of a moderately dense square well gas is studied in order to understand the effects of attractive forces (particularly bound states). The quantum cluster expansions of the Green -Kubo time correlation functions for the thermal conductivity, shear viscosity, and self-diffusion coefficients are given, and exact expressions to zeroth (Boltzmann level) and first order in the density are obtained. Specializing to Boltzmann statistics and the classical square well potential allows calculations of the kinetic potential parts of the first density correction; the important contributions to the remaining triple collision parts are discussed. Good agreement with molecular dynamics results is found; quantitative difference from real fluids are observed, however. Possible reasons for the discrepancies are discussed. A brief description of the ultility and limitations of the hard sphere model is given for comparison. The dynamics structure factor is calculated for a dense fluid of hard spheres and compared with recent neutron scattering data for Krypton.
Schmidtke, B.; Petzold, N.; Kahlau, R.; Hofmann, M.; Rössler, E. A.
2012-10-01
The phenomenon of the glass transition is an unresolved problem in condensed matter physics. Its prominent feature, the super-Arrhenius temperature dependence of the transport coefficients, remains a challenge to be described over the full temperature range. For a series of molecular glass formers, we combined τ(T) collected from dielectric spectroscopy and dynamic light scattering covering a range 10-12 s < τ(T) < 102 s. Describing the dynamics in terms of an activation energy E(T), we distinguish a high-temperature regime characterized by an Arrhenius law with a constant activation energy E∞ and a low-temperature regime for which Ecoop(T) ≡ E(T)-E∞ increases exponentially while cooling. A scaling is introduced, specifically Ecoop(T)/E∞ ∝ exp[-λ(T/TA-1)], where λ is a fragility parameter and TA a reference temperature proportional to E∞. In order to describe τ(T) still the attempt time τ∞ has to be specified. Thus, a single interaction parameter E∞ describing the high-temperature regime together with λ controls the temperature dependence of low-temperature cooperative dynamics.
Energy Technology Data Exchange (ETDEWEB)
Mitchell, J A; Molenkamp, C R; Bixler, N E; Morrow, C W; Ramsdell, Jr., J V
2004-05-10
The Nuclear Regulatory Commission uses MACCS2 (MELCOR Accident Consequence Code System, Version 2) for regulatory purposes such as planning for emergencies and cost-benefit analyses. MACCS2 uses a straight-line Gaussian model for atmospheric transport and dispersion. This model has been criticized as being overly simplistic, although only expected values of metrics of interest are used in the regulatory arena. To test the assumption that averaging numerous weather results adequately compensates for the loss of structure in the meteorology that occurs away from the point of release, average MACCS2 results have been compared with average results from a state-of-the-art, 3-dimensional LODI (Lagrangian Operational Dispersion Integrator)/ADAPT (Atmospheric Data Assimilation and Parameterization Technique) and a Lagrangian trajectory, Gaussian puff transport and dispersion model from RASCAL (Radiological Assessment System for consequence Analysis). The weather sample included 610 weather trials representing conditions for a hypothetical release at the Central Facility of the Department of Energy's Atmospheric Radiation Measurement site. The values compared were average ground concentrations and average surface-level air concentrations at several distances out to 100 miles (160.9 km) from the assumed release site.
Gourgue, O.; Baeyens, W.; Chen, M. S.; de Brauwere, A.; de Brye, B.; Deleersnijder, E.; Elskens, M.; Legat, V.
2013-12-01
This paper presents the sediment module designed for the two-dimensional depth-averaged and one-dimensional section-averaged components of the finite-element model SLIM (Second-generation Louvain-la-Neuve Ice-ocean Model) in the framework of its application to the tidal part of the Scheldt Basin. This sediment transport module focuses on fine-grained, cohesive sediments. It is a necessary tool to undertake environmental biogeochemical studies, in which fine sediment dynamics play a crucial role.
DEFF Research Database (Denmark)
Crabeck, O.; Delille, B.; Rysgaard, Søren
2014-01-01
evolution of an internal gas peak within the ice, we deduced the bulk gas transport coefficients for oxygen (DO2), argon (DAr), and nitrogen (DN2). The values fit to the few existing estimates from experimental work, and are close to the diffusivity values in water (1025 cm2 s21). We suggest that gas...
U.S. Department of Health & Human Services — A list of a variety of averages for each state or territory as well as the national average, including each quality measure, staffing, fine amount and number of...
Ion transport properties and Seebeck coefficient of Fe-doped La(Sr)Al(Mg)O{sub 3-{delta}}
Energy Technology Data Exchange (ETDEWEB)
Tsipis, E.V.; Kharton, V.V.; Vyshatko, N.V.; Frade, J.R.; Marques, F.M.B. [Aveiro Univ., Dept. of Ceramics and Glass Engineering, CICECO (Portugal); Kharton, V.V. [Belarus State Univ., Institute of Physicochemical Problems, Minsk (Belarus)
2005-07-01
Iron incorporation into lanthanum aluminate-based solid electrolyte leads to increasing oxygen ionic and p-type electronic conductivities. The oxygen ion transference numbers of perovskite-type La{sub 0.90}Sr{sub 0.10}Al{sub 0.85-x}Fe{sub x}Mg{sub 0.15}O{sub 3-{delta}} (x=0.2-0.4), determined by faradic efficiency measurements in air, vary from 6.9*10{sup -4} to 1.6*10{sup -2} at 1073-1223 K, increasing with temperature and decreasing when iron content increases. In order to study the behavior of transition metal cations dissolved in a lattice of cations with stable oxidation state, the total conductivity and Seebeck coefficient of La{sub 0.90}Sr{sub 0.10}Al{sub 0.65}Fe{sub 0.20}Mg{sub 0.15}O{sub 3-{delta}} were measured at 1073-1223 K in the oxygen partial pressure range from 10{sup -20} to 0.5 atm. The p-type electronic conduction dominating under oxidizing conditions, with hole mobility activation energy of 15 kJ.mol{sup -1}, occurs via a small-polaron mechanism. Reducing oxygen pressure results in increasing ionic conduction, which becomes predominant at p(O2) lower than 10{sup -10} atm. The activation energy for ionic transport, 87-107 kJ mol{sup -1}, decreases with reducing p(O2) due to a decreasing contribution of the vacancy formation enthalpy. Contrary to the Fe-substituted aluminates, dense ceramics of La(Sr)Al(Mg,M)O{sub 3-{delta}} (M=Co, Ni) cannot be obtained under atmospheric oxygen pressure due to La{sub 2}MO{sub 4}-based phase segregation in the course of sintering at temperatures above 1400 K. (authors)
Energy Technology Data Exchange (ETDEWEB)
Ghosh, Krishnendu, E-mail: kghosh3@buffalo.edu; Singisetti, Uttam, E-mail: uttamsin@buffalo.edu [Electrical Engineering Department, University at Buffalo, Buffalo, New York 14260 (United States)
2015-10-07
The thermoelectric transport coefficients of electrons in two recently emerged transition metal di-chalcogenides (TMD), MoS{sub 2} and WSe{sub 2}, are calculated by solving Boltzmann transport equation using Rode's iterative technique in the diffusive transport regime and the coupled current (electrical and heat) equations. Scattering from remote phonons along with the hybridization of TMD plasmon with remote phonon modes and dynamic screening under linear polarization response are investigated in TMDs sitting on a dielectric environment. The transport coefficients are obtained for a varying range of temperature and doping density for three different types of substrates—SiO{sub 2}, Al{sub 2}O{sub 3}, and HfO{sub 2}. The Seebeck co-efficient for MoS{sub 2} and WSe{sub 2} is found to be higher than 3D semiconductors even with diffusive transport. The electronic thermal conductivity is found to be low, however, the thermoelectric figure of merit is limited by the high phonon thermal conductivity. It is found that judicious selection of a dielectric environment based on temperature of operation and carrier density is crucial to optimize the thermoelectric performance of TMD materials.
McGuire, Tim
1998-01-01
In this paper, we report the results of our recent research on the application of a multiprocessor Cray T916 supercomputer in modeling super-thermal electron transport in the earth's magnetic field. In general, this mathematical model requires numerical solution of a system of partial differential equations. The code we use for this model is moderately vectorized. By using Amdahl's Law for vector processors, it can be verified that the code is about 60% vectorized on a Cray computer. Speedup factors on the order of 2.5 were obtained compared to the unvectorized code. In the following sections, we discuss the methodology of improving the code. In addition to our goal of optimizing the code for solution on the Cray computer, we had the goal of scalability in mind. Scalability combines the concepts of portabilty with near-linear speedup. Specifically, a scalable program is one whose performance is portable across many different architectures with differing numbers of processors for many different problem sizes. Though we have access to a Cray at this time, the goal was to also have code which would run well on a variety of architectures.
Niu, Chunping; Chen, Zhexin; Rong, Mingzhe; Wang, Chunlin; Wu, Yi; Yang, Fei; Wang, Xiaohua; Pang, Qingping
2016-10-01
The transport coefficients, namely thermal conductivity, viscosity and electrical conductivity, of CO2-CH4 mixture in and out of LTE are calculated in this paper. The calculation was based on local chemical equilibrium (LCE) and local phase equilibrium assumption. The 2-temperature composition results obtained with consideration of condensed phase in the previous paper (Part I) of this series were used in this calculation. The transport coefficients were calculated by classical Chapman-Enskog method simplified by Devoto. The results are presented for different temperatures (300-30 000 K), pressures (0.1-10 atm), non-equilibrium degrees (1-5), and CH4 molar proportions (0-100%). The influence of condensed graphite, non-LTE effect, mixture ratio and pressure on the composition and thermodynamic properties has been discussed. The results will serve as reliable reference data for computational simulation of CO2-CH4 plasmas.
Kobryn, A E; Tokarchuk, M V
1999-01-01
An Enskog-Landau kinetic equation for a many-component system of charged hard spheres is proposed. It has been obtained from the Liouville equation with modified boundary conditions by the method of nonequilibrium statistical operator. On the basis of this equation the normal solutions and transport coefficients such as bulk kappa and shear eta viscosities, thermal conductivity lambda, mutual diffusion D^{\\alpha\\beta} and thermal diffusion D_T^\\alpha have been obtained for a binary mixture in the first approximation using the Chapman-Enskog method. Numerical calculations of all transport coefficients for mixtures Ar-Kr, Ar-Xe, Kr-Xe with different concentrations of compounds have been evaluated for the cases of absence and presence of long-range Coulomb interactions. The results are compared with those obtained from other theories and experiment.
Zhong, Xinxin; Zhao, Yi; Cao, Jianshu
2014-04-01
The time-dependent wavepacket diffusion method for carrier quantum dynamics (Zhong and Zhao 2013 J. Chem. Phys. 138 014111), a truncated version of the stochastic Schrödinger equation/wavefunction approach that approximately satisfies the detailed balance principle and scales well with the size of the system, is applied to investigate the carrier transport in one-dimensional systems including both the static and dynamic disorders on site energies. The predicted diffusion coefficients with respect to temperature successfully bridge from band-like to hopping-type transport. As demonstrated in paper I (Moix et al 2013 New J. Phys. 15 085010), the static disorder tends to localize the carrier, whereas the dynamic disorder induces carrier dynamics. For the weak dynamic disorder, the diffusion coefficients are temperature-independent (band-like property) at low temperatures, which is consistent with the prediction from the Redfield equation, and a linear dependence of the coefficient on temperature (hopping-type property) only appears at high temperatures. In the intermediate regime of dynamic disorder, the transition from band-like to hopping-type transport can be easily observed at relatively low temperatures as the static disorder increases. When the dynamic disorder becomes strong, the carrier motion can follow the hopping-type mechanism even without static disorder. Furthermore, it is found that the memory time of dynamic disorder is an important factor in controlling the transition from the band-like to hopping-type motions.
Cerrillo, Javier; Buser, Maximilian; Brandes, Tobias
2016-12-01
Nonequilibrium transport properties of quantum systems have recently become experimentally accessible in a number of platforms in so-called full-counting experiments that measure transient and steady-state nonequilibrium transport dynamics. We show that the effect of the measurement back-action can be exploited to establish general relationships between transport coefficients in the transient regime which take the form of fluctuation-dissipation theorems in the steady state. This result becomes most conspicuous in the transient dynamics of open quantum systems under strong-coupling to non-Markovian environments in nonequilibrium settings. In order to explore this regime, a new simulation method based in a hierarchy of equations of motion has been developed. We instantiate our proposal with the study of energetic conductance between two baths connected via a few level system.
Mamo, Kiminad A
2016-01-01
We study $\\mathcal{N} = 4$ super Yang-Mills theory on the Coulomb branch (cSYM) by using its Type IIB supergravity dual. We compute the transport coefficients, and hard probes of $\\mathcal{N} = 4$ cSYM at finite temperature $T$. We use the rotating black 3-brane solution of Type IIB supergravity with a single non-zero rotation parameter $r_{0}$ after analytically continuing $r_{0}\\rightarrow -ir_{0}$, and in a new ensemble where $T$ and $r_{0}$ are held fixed. We find that the bulk viscosity to entropy density ratio of the large black hole branch decreases with temperature and has a maxima around the critical temperature $T_{c}$ while, for the small black hole branch, it increases with temperature. The other transport coefficients and parameters of hard probes, such as the conductivity, jet quenching parameter, drag force, and momentum diffusion coefficients of the large black hole branch increase with temperature and asymptote to their conformal value while, for the small black hole branch, they decrease wit...
Directory of Open Access Journals (Sweden)
Li-ren YU
2009-09-01
Full Text Available This paper describes a numerical simulation of thermal discharge in the cooling pool of an electrical power station, aiming to develop general-purpose computational programs for grid generation and flow/pollutant transport in the complex domains of natural and artificial waterways. Three depth-averaged two-equation closure turbulence models, κ- ε, κ-w , and κ-ω, were used to close the quasi three-dimensional hydrodynamic model. The κ-ω model was recently established by the authors and is still in the testing process. The general-purpose computational programs and turbulence models will be involved in a software that is under development. The SIMPLE (Semi-Implicit Method for Pressure-Linked Equation algorithm and multi-grid iterative method are used to solve the hydrodynamic fundamental governing equations, which are discretized on non-orthogonal boundary-fitted grids with a variable collocated arrangement. The results calculated with the three turbulence models were compared with one another. In addition to the steady flow and thermal transport simulation, the unsteady process of waste heat inpouring and development in the cooling pool was also investigated.
Institute of Scientific and Technical Information of China (English)
Li-ren YU; Jun YU
2009-01-01
This paper describes a numerical simulation of thermal discharge in the cooling pool of an electrical power station,aiming to develop general-purpose computational programs for grid generation and flow/pollutant transport in the complex domains of natural and artificial waterways.Three depth-averaged two-equation closure turbulence models,(k)-(ε),(k)-(w),and (k)-(ω),were used to close the quasi three-dimensional hydrodynamic model.The (k)-(ω) model was recently established by the authors and is still in the testing process.The general-purpose computational programs and turbulence models will be involved in a software that is under development.The SIMPLE (Semi-Implicit Method for Pressure-Linked Equation) algorithm and multi-grid iterative method are used to solve the hydrodynamic fundamental governing equations,which are discretized on non-orthogonal boundary-fitted grids with a variable collocated arrangement.The results calculated with the three turbulence models were compared with one another.In addition to the steady flow and thermal transport simulation,the unsteady process of waste heat inpouring and development in the cooling pool was also investigated.
Nganhou, J.; Njomo, D.; Bénet, J. C.; Augier, F.; Berthomieu, G.
2003-09-01
This article is about the study of the diffusion of water and acetic acid in a grain of cocoa in course of drying. The authors present a method of microanalysis which enables the analysis of each little slice of the grain : a precise measurement of each slice is realised in view of the analysis from the centre to the surface of the grain with the aid of a cutting apparatus, designed and realised to this effect. At each instant of the drying process, the profiles of water and acetic acid contents are then determined. A one dimensional diffusion model enables a shell by shell evaluation of the diffusion of water and acid in the cocoa grain. The results obtained show an augmentation of transport coefficients in course of drying. We however observe a decrease of the diffusion coefficient of water to the low moisture content : what makes us think of the appearance of crusting phenomenon.
Tawfik, Abdel Nasser
2016-01-01
In peripheral heavy-ion collisions, localized ,short-lived an extremely huge magnetic field can be generated. Its possible influences on the quark-hadron phase transition(s) and the transport properties of the hadronic and partonic matter shall be analysed from the Polyakov linear-sigma model. Our calculations are compared with recent lattice QCD calculations.
Wang, Peng; Wang, Shun-Jin; Zhang, Hua
2005-01-01
In order to control non-equilibrium processes and to describe the fat-tail phenomenon in econophysics, we generalize the traditional the Fokker-Planck equation (FPE) by including a quadratic correlation potential, and by making the time-dependent drift-diffusion coefficients. We investigate the su(1,1)⊕u(1) algebraic structure and obtain the exact solutions to the generalized time-dependent FPE by using the algebraic dynamical method. Based on the exact solution, an important issue in modern econophysics, i.e. the fat-tail distribution in stock markets, is analysed.
Institute of Scientific and Technical Information of China (English)
WANG Peng; WANG Shun-Jin; ZHANG Hua
2005-01-01
@@ In order to control non-equilibrium processes and to describe the fat-tail phenomenon in econophysics, we generalize the traditional the Fokker-Planck equation (FPE) by including a quadratic correlation potential, and by making the time-dependent drift-diffusion coefficients. We investigate the su(1, 1) ~ u(1) algebraic structure and obtain the exact solutions to the generalized time-dependent FPE by using the algebraic dynamical method. Based on the exact solution, an important issue in modern econophysics, i.e. the fat-tail distribution in stock markets, is analysed.
Energy Technology Data Exchange (ETDEWEB)
He, Guangli; Shibata, Kenji; Yamazaki, Yohtaro [Department of Innovative and Engineered Materials, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology (Japan); Abuliti, Abudula [North Japan New Energy Research Center, Hirosaki University, Aomori (Japan)
2010-08-01
A numerical approach is developed to determine the real-time Net Water Transport Coefficient (NWTC) based on the experimental water vapor pressure for the cathode and anode outlet obtained by the optical humidity sensors with Tunable Diode Laser Absorption Spectroscopy (TDLAS). The results show that there are sharp vibrations for NWTC in the process of start-up and shut-down. And the time needed for the water transport balance increases with the increase in the current. The balanced NWTC ranges from -0.2 to 0.2, and it increases with the increase in the operation current in the present research. In the view of flooding prevention, it is reasonable to humidify the anode inlet gas with the lower temperature than that of cathode side by decreasing the osmotic-drag water from anode to cathode. (author)
El Kadi Abderrezzak, Kamal; Die Moran, Andrés; Tassi, Pablo; Ata, Riadh; Hervouet, Jean-Michel
2016-07-01
Bank erosion can be an important form of morphological adjustment in rivers. With the advances made in computational techniques, two-dimensional (2D) depth-averaged numerical models have become valuable tools for resolving many engineering problems dealing with sediment transport. The objective of this research work is to present a simple, new, bank-erosion operator that is integrated into a 2D Saint-Venant-Exner morphodynamic model. The numerical code is based on an unstructured grid of triangular elements and finite-element algorithms. The slope of each element in the grid is compared to the angle of repose of the bank material. Elements for which the slope is too steep are tilted to bring them to the angle of repose along a horizontal axis defined such that the volume loss above the axis is equal to the volume gain below, thus ensuring mass balance. The model performance is assessed using data from laboratory flume experiments and a scale model of the Old Rhine. For the flume experiment case with uniform bank material, relevant results are obtained for bank geometry changes. For the more challenging case (i.e. scale model of the Old Rhine with non-uniform bank material), the numerical model is capable of reproducing the main features of the bank failure, induced by the newly designed groynes, as well as the transport of the mobilized sediment material downstream. Some deviations between the computed results and measured data are, however, observed. They are ascribed to the effects of three-dimensional (3D) flow structures, pore pressure and cohesion, which are not considered in the present 2D model.
Energy Technology Data Exchange (ETDEWEB)
Dai, S. [National Institute for Fusion Science, Toki (Japan); Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian (China); Kobayashi, M.; Morita, S.; Oishi, T.; Suzuki, Y. [National Institute for Fusion Science, Toki (Japan); Department of Fusion Science, School of Physical Sciences, SOKENDAI (The Graduate University for Advanced Studies), Toki (Japan); Kawamura, G. [National Institute for Fusion Science, Toki (Japan); Zhang, H.M.; Huang, X.L. [Department of Fusion Science, School of Physical Sciences, SOKENDAI (The Graduate University for Advanced Studies), Toki (Japan); Feng, Y. [Max-Planck-Institut fuer Plasmaphysik, Greifswald (Germany); Wang, D.Z. [Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian (China); Collaboration: The LHD experiment group
2016-08-15
The transport properties and line emissions of the intrinsic carbon in the stochastic layer of the Large Helical Device have been investigated with the three-dimensional edge transport code EMC3-EIRENE. The simulations of impurity transport and emissivity have been performed to study the dedicated experiment in which the carbon emission distributions are measured by a space-resolved EUV spectrometer system. A discrepancy of the CIV impurity emission between the measurement and simulation is obtained, which is studied with the variation of the ion thermal force, friction force and the perpendicular diffusivity in the impurity transport model. An enhanced ion thermal force or a reduced friction force in the modelling can increase the CIV impurity emission at the inboard X-point region. Furthermore, the impact of the perpendicular diffusivity Dimp is studied which shows that the CIV impurity emission pattern is very sensitive to Dimp. It is found that the simulation results with the increased Dimp tend to be closer to the experimental observation. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)
Satoh, Akira; Ozaki, Masataka
2006-06-15
We have investigated the influence of the magnetic field strength, shear rate, and rotational Brownian motion on transport coefficients such as viscosity and diffusion coefficient, and also on the orientational distributions of rodlike particles of a dilute colloidal dispersion. The rodlike particle is modeled as a magnetic spheroidal particle which has a magnetic moment normal to the particle axis; such a particle may typically be a hematite particle. In the present study, an external magnetic field is applied in the direction normal to the shear plane of a simple shear flow. The basic equation of the orientational distribution function has been derived from the balance of torques and solved numerically. The results obtained here are summarized as follows. Although the orientational distribution function shows a sharp peak in the shear flow direction for a very strong magnetic field, such a peak is not restricted to the field direction alone, but continues in every direction of the shear plane. This is due to the characteristic particle motion that the particle can rotate around the axis of the magnetic moment in the shear plane, although the magnetic moment nearly points to the magnetic field direction. This particle motion in the shear plane causes negative values of the viscosity due to the magnetic field. The viscosity decreases, attains a minimum value, and then converges to zero as the field strength increases. Additionally, the diffusion coefficient is significantly influenced by such characteristic particle motion in the shear plane for a strong magnetic field.
Energy Technology Data Exchange (ETDEWEB)
Barbosa, R. [Centro de Investigacion en Energia, UNAM, Privada Xochicalco S/N, 62580 Temixco (Mexico); Andaverde, J. [Centro de Investigacion en Ingenieria y Ciencias Aplicadas, UAEM, Av. Universidad 1001, Col. Chamilpa, 62210 Cuernavaca (Mexico); Escobar, B. [Instituto Tecnologico de Cancun, Av. Kabah 3, 77515 Cancun (Mexico); Cano, U. [Instituto de Investigaciones Electricas, Av. Reforma 113, col. Palmira, 62490 Cuernavaca (Mexico)
2011-02-01
This work uses a method for the stochastic reconstruction of catalyst layers (CLs) proposing a scaling method to determine effective transport properties in proton exchange membrane fuel cell (PEMFC). The algorithm that generates the numerical grid makes use of available information before and after manufacturing the CL. The structures so generated are characterized statistically by two-point correlation functions and by the resultant pore size distribution. As an example of this method, the continuity equation for charge transport is solved directly on the three-dimensional grid of finite control volumes (FCVs), to determine effective electrical and proton conductivities of different structures. The stochastic reconstruction and the electrical and proton conductivity of a 45 {mu}m side size cubic sample of a CL, represented by more than 3.3 x 10{sup 12} FVCs were realized in a much shorter time compared with non-scaling methods. Variables studied in an example of CL structure were: (i) volume fraction of dispersed electrolyte, (ii) total CL porosity and (iii) pore size distribution. Results for the conduction efficiency for this example are also presented. (author)
Bisetti, Fabrizio; El Morsli, Mbark
2014-01-01
The effects of an electric field on the collision rates, energy exchanges and transport properties of electrons in premixed flames are investigated via solutions to the Boltzmann kinetic equation. The case of high electric field strength, which results in high-energy, non-thermal electrons, is analysed in detail at sub-breakdown conditions. The rates of inelastic collisions and the energy exchange between electrons and neutrals in the reaction zone of the flame are characterised quantitatively. The analysis includes attachment, ionisation, impact dissociation, and vibrational and electronic excitation processes. Our results suggest that Townsend breakdown occurs for E/N = 140 Td. Vibrational excitation is the dominant process up to breakdown, despite important rates of electronic excitation of CO, CO2 and N2 as well as impact dissociation of O2 being apparent from 50 Td onwards. Ohmic heating in the reaction zone is found to be negligible (less than 2% of peak heat release rate) up to breakdown field strengths for realistic electron densities equal to 1010 cm-3. The observed trends are largely independent of equivalence ratio. In the non-thermal regime, electron transport coefficients are insensitive to mixture composition and approximately constant across the flame, but are highly dependent on the electric field strength. In the thermal limit, kinetic parameters and transport coefficients vary substantially across the flame due to the spatially inhomogeneous concentration of water vapour. A practical approach for identifying the plasma regime (thermal versus non-thermal) in studies of electric field effects on flames is proposed.
Bisetti, Fabrizio
2014-01-02
The effects of an electric field on the collision rates, energy exchanges and transport properties of electrons in premixed flames are investigated via solutions to the Boltzmann kinetic equation. The case of high electric field strength, which results in high-energy, non-thermal electrons, is analysed in detail at sub-breakdown conditions. The rates of inelastic collisions and the energy exchange between electrons and neutrals in the reaction zone of the flame are characterised quantitatively. The analysis includes attachment, ionisation, impact dissociation, and vibrational and electronic excitation processes. Our results suggest that Townsend breakdown occurs for E/N = 140 Td. Vibrational excitation is the dominant process up to breakdown, despite important rates of electronic excitation of CO, CO2 and N2 as well as impact dissociation of O2 being apparent from 50 Td onwards. Ohmic heating in the reaction zone is found to be negligible (less than 2% of peak heat release rate) up to breakdown field strengths for realistic electron densities equal to 1010 cm-3. The observed trends are largely independent of equivalence ratio. In the non-thermal regime, electron transport coefficients are insensitive to mixture composition and approximately constant across the flame, but are highly dependent on the electric field strength. In the thermal limit, kinetic parameters and transport coefficients vary substantially across the flame due to the spatially inhomogeneous concentration of water vapour. A practical approach for identifying the plasma regime (thermal versus non-thermal) in studies of electric field effects on flames is proposed. © 2014 Taylor & Francis.
Mendoza, D. L.; Gurney, K. R.
2011-12-01
The transportation sector is the second largest CO2 emitting economic sector in the United States, accounting for 32.3% of the total U.S. emissions in 2002. Within the transportation sector, the largest component (80%) is made up of onroad emissions. In order to accurately quantify future emissions and evaluate emissions regulation strategies, analysis must account for spatially-explicit fleet distribution, driving patterns, and mitigation strategies. Studies to date, however, have either focused on one of these three components, have been only completed at the national scale, or have not explicitly represented CO2 emissions instead relying on the use of vehicle miles traveled (VMT) as an emissions proxy. We compare a high resolution onroad emissions data product (Vulcan) to a national averaging of the Vulcan result. This comparison is performed in four groupings: light duty (LD) and heavy duty (HD) vehicle classes, and rural and urban road classes. Two different bias metrics are studied: 1) the state-specific, group-specific bias and 2) the same bias when weighted by the state share of the national group-specific emissions. In the first metric, we find a spread of positive and negative biases for the LD and HD vehicle groupings and these biases are driven by states having a greater/lesser proportion of LD/HD vehicles within their total state fleet than found from a national average. The standard deviation of these biases is 2.01% and 0.75% for the LD and HD groupings, respectively. These biases correlate with the road type present in a state, so that biases found in the urban and LD groups are both positive or both negative, with a similar relationship found between biases of the rural and HD groups. Additionally, the road group bias is driven by the distribution of VMT on individual road classes within the road groupings. When normalized by national totals, the state-level group-specific biases reflect states with large amounts of onroad travel that deviate
Energy Technology Data Exchange (ETDEWEB)
Montes T, J.L.; Cortes C, C.C. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)
1992-08-15
The objective of the report is to determine manually or by means of a calculation sheet, the coefficients {alpha} and {beta} of the average enrichment equation as function of the fuel burnt (B) using the Lineal Reactivity Pattern, with information generated by the RECORD code of the FMS package. (Author00.
Chilenski, M. A.; Greenwald, M.; Marzouk, Y.; Howard, N. T.; White, A. E.; Rice, J. E.; Walk, J. R.
2015-02-01
The need to fit smooth temperature and density profiles to discrete observations is ubiquitous in plasma physics, but the prevailing techniques for this have many shortcomings that cast doubt on the statistical validity of the results. This issue is amplified in the context of validation of gyrokinetic transport models (Holland et al 2009 Phys. Plasmas 16 052301), where the strong sensitivity of the code outputs to input gradients means that inadequacies in the profile fitting technique can easily lead to an incorrect assessment of the degree of agreement with experimental measurements. In order to rectify the shortcomings of standard approaches to profile fitting, we have applied Gaussian process regression (GPR), a powerful non-parametric regression technique, to analyse an Alcator C-Mod L-mode discharge used for past gyrokinetic validation work (Howard et al 2012 Nucl. Fusion 52 063002). We show that the GPR techniques can reproduce the previous results while delivering more statistically rigorous fits and uncertainty estimates for both the value and the gradient of plasma profiles with an improved level of automation. We also discuss how the use of GPR can allow for dramatic increases in the rate of convergence of uncertainty propagation for any code that takes experimental profiles as inputs. The new GPR techniques for profile fitting and uncertainty propagation are quite useful and general, and we describe the steps to implementation in detail in this paper. These techniques have the potential to substantially improve the quality of uncertainty estimates on profile fits and the rate of convergence of uncertainty propagation, making them of great interest for wider use in fusion experiments and modelling efforts.
基于产运系数法的物流需求量预测研究%Forecasting of Logistic Demand Based on Production and Transportation Coefficient
Institute of Scientific and Technical Information of China (English)
冯淑贞
2013-01-01
结合我国社会物流统计制度确立的指标体系,对传统的以货运量为核心的物流预测方法的优缺点进行了分析.在此基础上提出了产运系数法,是从物流基本概念出发的物流需求量计算方法,并采用该方法对某地区的运输量、库存量、配送量、全社会物流需求量、第三方物流需求量进行了预测.%In this paper,in connection with the index system determined in the social logistics statistics system of China,we analyzed the strength and weakness of the traditional logistics forecasting processes centered on cargo transport volume,on the basis of which,we proposed the logistics demand calculation method based on production and transportation coefficient,and applied it to the forecasting of the third party logistics demand ofacertain area.
Transport coefficients of the QGP
Amato, Alessandro; Allton, Chris; Giudice, Pietro; Hands, Simon; Skullerud, Jon-Ivar
2013-01-01
The FASTSUM collaboration presents a study on the temperature dependence of the electrical conductivity $\\sigma$ in the quark-gluon plasma, using the methods of lattice QCD. Correlators of the exactly conserved vector current are measured at different temperatures across the deconfinement transition, using ensembles of $2+1$ flavours of dynamical fermions on anisotropic lattices. We then employ bayesian methods (MEM) to extract the relevant spectral functions, which are found to be consistent with $\\sigma/T$ rising as a function of $T$. The robustness of the results is verified by a detailed analysis of the systematics involved in the bayesian reconstruction of the spectral functions.
Boithias, Laurie; Sauvage, Sabine; Merlina, Georges; Jean, Séverine; Probst, Jean-Luc; Sánchez Pérez, José Miguel
2014-03-01
Pesticides applied on crops are leached with rainfall to groundwater and surface water. They threat the aquatic environment and may render water unfit for human consumption. Pesticide partitioning is one of the pesticide fate processes in the environment that should be properly formalised in pesticide fate models. Based on the analysis of 7 pesticide molecules (alachlor, atrazine, atrazine's transformation product deethylatrazine or DEA, isoproturon, tebuconazole and trifluralin) sampled from July 2009 to October 2010 at the outlet of the river Save (south-western France), the objectives of this study were (1) to check which of the environmental factors (discharge, pH, concentrations of total suspended matter (TSM), dissolved organic carbon (DOC) and particulate organic carbon (POC) could control the pesticide sorption dynamic, and (2) to establish a relationship between environmental factors, the partition coefficient Kd and the octanol/water distribution coefficient Kow. The comparison of physico-chemical parameters values during low flow and high flow shows that discharge, TSM and POC are the factors most likely controlling the pesticide sorption processes in the Save river network, especially for lower values of TSM (below 13mgL(-1)). We therefore express Kd depending on the widely literature-related variable Kow and on the commonly simulated variable TSM concentration. The equation can be implemented in any model describing the fluvial transport and fate of pesticides in both dissolved and sorbed phases, thus, Kd becomes a variable in time and space. The Kd calculation method can be applied to a wide range of catchments and organic contaminants.
Copeland, Kyle; Parker, Donald E; Friedberg, Wallace
2010-03-01
Conversion coefficients have been calculated for fluence-to-absorbed dose, fluence-to-effective dose and fluence-to-gray equivalent for isotropic exposure of an adult male and an adult female to (56)Fe(26+) in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). The coefficients were calculated using Monte Carlo transport code MCNPX 2.7.A and BodyBuilder 1.3 anthropomorphic phantoms modified to allow calculation of effective dose using tissues and tissue weighting factors from either the 1990 or 2007 recommendations of the International Commission on Radiological Protection (ICRP) and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. Calculations using ICRP 2007 recommendations result in fluence-to-effective dose conversion coefficients that are almost identical at most energies to those calculated using ICRP 1990 recommendations.
Copeland, Kyle; Parker, Donald E; Friedberg, Wallace
2010-03-01
Conversion coefficients have been calculated for fluence to absorbed dose, fluence to effective dose and fluence to gray equivalent, for isotropic exposure to alpha particles in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). The coefficients were calculated using Monte Carlo transport code MCNPX 2.7.A and BodyBuilder 1.3 anthropomorphic phantoms modified to allow calculation of effective dose to a Reference Person using tissues and tissue weighting factors from 1990 and 2007 recommendations of the International Commission on Radiological Protection (ICRP) and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. Coefficients for effective dose are within 30 % of those calculated using ICRP 1990 recommendations.
Slezak, Andrzej
2011-01-01
In this paper the Kedem-Katchalsky equations were derived, using hybrid transformation of Peusner's network. These equations were applied to interpretation of a transport through polymeric membrane of binary nonelectrolyte solutions under concentration polarization conditions. The values of coefficients P(ij)* (i, j = 1, 2) were calculated for Nephrophan membrane and aqueous glucose solutions. From the calculations it results that the coefficient values P(11)*, P(12)*, P(21)* and P(22)* are nonlinear depend on a solution concentration (C) and configuration of the membrane system. Moreover, the values of coefficients P(11)*, P(12)*, P(21)* and P(22)* were compared to the values of coefficients H(11), H(12), H(21) and H(22), calculated for conditions of solution homogeneity for the same values C and varied configurations of membrane system. It is shown that a threshold value exists and when exceeded, coefficients relations P(11)*/P(11), P(12)*/P(12) and P(22)/P(22) depend on a configuration of the membrane system.
Copeland, Kyle; Parker, Donald E; Friedberg, Wallace
2011-01-01
Conversion coefficients were calculated for fluence-to-absorbed dose, fluence-to-equivalent dose, fluence-to-effective dose and fluence-to-gray equivalent for isotropic exposure of an adult female and an adult male to deuterons ((2)H(+)) in the energy range 10 MeV-1 TeV (0.01-1000 GeV). Coefficients were calculated using the Monte Carlo transport code MCNPX 2.7.C and BodyBuilder™ 1.3 anthropomorphic phantoms. Phantoms were modified to allow calculation of the effective dose to a Reference Person using tissues and tissue weighting factors from 1990 and 2007 recommendations of the International Commission on Radiological Protection (ICRP) and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. Coefficients for the equivalent and effective dose incorporated a radiation weighting factor of 2. At 15 of 19 energies for which coefficients for the effective dose were calculated, coefficients based on ICRP 1990 and 2007 recommendations differed by <3%. The greatest difference, 47%, occurred at 30 MeV.
Zhong, Linlin; Rong, Mingzhe; Wang, Xiaohua; Wu, Junhui; Han, Guiquan; Han, Guohui; Lu, Yanhui; Yang, Aijun; Wu, Yi
2017-07-01
C5F10O has recently been found to be a very promising alternative to SF6. This paper is devoted to the investigation of compositions, thermodynamic properties, and transport coefficients of high-temperature C5F10O mixed with CO2 and O2. Firstly, the partition functions and enthalpies of formation for a few molecules (CxFy and CxFyO) which are likely to exist in the mixtures, are calculated based on the G4(MP2) theory. The isomers of the above molecules are selected according to their Gibbs energy. The compositions of C5F10O-CO2-O2 mixtures are then determined using the minimization of the Gibbs free energy. Next, the thermodynamic properties (mass density, specific enthalpy, and specific heat) are derived from the previously calculated compositions. Lastly, the transport coefficients (electrical conductivity, viscosity, and thermal conductivity) are calculated based on Chapman-Enskog method. It is found that, as an arc quenching gas, C5F10O could not recombine into itself with the temperature decreasing down to room temperature after the arc extinction. Besides, the key species at room temperature are always CF4, CO2, and C4F6 if graphite is not considered. When taken into account, graphite will replace C4F6 as one of the dominate particles. The mixing of CO2 with C5F10O plasma significantly affects the thermodynamic properties (e.g. vanishing and/or shifting of the peaks in specific heat) and transport coefficients (e.g. reducing viscosity and changing the number of peaks in thermal conductivity), while the addition of O2 with C5F10O-CO2 mixtures has no remarkable influence on both thermodynamic and transport properties.
Study and verification on dispersion coefficient in wave field
Institute of Scientific and Technical Information of China (English)
SHEN LiangDuo; ZOU ZhiLi
2012-01-01
Transport and diffusion caused by coastal waves have different characteristics from those induced by flows.Through solving the vertical diffusion equation by an analytic method,this paper infers a theoretical formula of dispersion coefficient under the combined action of current and waves.It divides the general dispersion coefficient into six parts,including coefficients due to tidal current,Stokes drift,wave oscillation and interaction among them.It draws a conclusion that the contribution of dispersive effect induced by coastal waves is mainly produced by Stokes drift,while the contributions to time-averaged dispersion coefficient due to wave orbital motion and interaction between current and waves are very small.The results without tidal current are in agreement with the numerical and experimental results,which proves the correctness of the theoretical derivation.This paper introduces the variation characteristics of both the time-averaged and oscillating dispersion coefficients versus relative water depth,and demonstrates the physical implications of the oscillating mixing coefficient due to waves.We also apply the results to the costal vertical circulation and give its characteristics compared to Stokes drift.
Directory of Open Access Journals (Sweden)
T. Berkemeier
2017-06-01
Full Text Available We present a Monte Carlo genetic algorithm (MCGA for efficient, automated, and unbiased global optimization of model input parameters by simultaneous fitting to multiple experimental data sets. The algorithm was developed to address the inverse modelling problems associated with fitting large sets of model input parameters encountered in state-of-the-art kinetic models for heterogeneous and multiphase atmospheric chemistry. The MCGA approach utilizes a sequence of optimization methods to find and characterize the solution of an optimization problem. It addresses an issue inherent to complex models whose extensive input parameter sets may not be uniquely determined from limited input data. Such ambiguity in the derived parameter values can be reliably detected using this new set of tools, allowing users to design experiments that should be particularly useful for constraining model parameters. We show that the MCGA has been used successfully to constrain parameters such as chemical reaction rate coefficients, diffusion coefficients, and Henry's law solubility coefficients in kinetic models of gas uptake and chemical transformation of aerosol particles as well as multiphase chemistry at the atmosphere–biosphere interface. While this study focuses on the processes outlined above, the MCGA approach should be portable to any numerical process model with similar computational expense and extent of the fitting parameter space.
Berkemeier, Thomas; Ammann, Markus; Krieger, Ulrich K.; Peter, Thomas; Spichtinger, Peter; Pöschl, Ulrich; Shiraiwa, Manabu; Huisman, Andrew J.
2017-06-01
We present a Monte Carlo genetic algorithm (MCGA) for efficient, automated, and unbiased global optimization of model input parameters by simultaneous fitting to multiple experimental data sets. The algorithm was developed to address the inverse modelling problems associated with fitting large sets of model input parameters encountered in state-of-the-art kinetic models for heterogeneous and multiphase atmospheric chemistry. The MCGA approach utilizes a sequence of optimization methods to find and characterize the solution of an optimization problem. It addresses an issue inherent to complex models whose extensive input parameter sets may not be uniquely determined from limited input data. Such ambiguity in the derived parameter values can be reliably detected using this new set of tools, allowing users to design experiments that should be particularly useful for constraining model parameters. We show that the MCGA has been used successfully to constrain parameters such as chemical reaction rate coefficients, diffusion coefficients, and Henry's law solubility coefficients in kinetic models of gas uptake and chemical transformation of aerosol particles as well as multiphase chemistry at the atmosphere-biosphere interface. While this study focuses on the processes outlined above, the MCGA approach should be portable to any numerical process model with similar computational expense and extent of the fitting parameter space.
Copeland, Kyle; Parker, Donald E; Friedberg, Wallace
2010-12-01
Conversion coefficients were calculated for fluence-to-absorbed dose, fluence-to-equivalent dose, fluence-to-effective dose and fluence-to-gray equivalent for isotropic exposure of an adult female and an adult male to tritons ((3)H(+)) in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). Coefficients were calculated using Monte Carlo transport code MCNPX 2.7.C and BodyBuilder™ 1.3 anthropomorphic phantoms. Phantoms were modified to allow calculation of effective dose to a Reference Person using tissues and tissue weighting factors from 1990 and 2007 recommendations of the International Commission on Radiological Protection (ICRP) and calculation of gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. At 15 of the 19 energies for which coefficients for effective dose were calculated, coefficients based on ICRP 2007 and 1990 recommendations differed by less than 3%. The greatest difference, 43%, occurred at 30 MeV.
Diffusion coefficient in photon diffusion theory
Graaff, R; Ten Bosch, JJ
2000-01-01
The choice of the diffusion coefficient to be used in photon diffusion theory has been a subject of discussion in recent publications on tissue optics. We compared several diffusion coefficients with the apparent diffusion coefficient from the more fundamental transport theory, D-app. Application to
Diffusion coefficient in photon diffusion theory
Graaff, R; Ten Bosch, JJ
2000-01-01
The choice of the diffusion coefficient to be used in photon diffusion theory has been a subject of discussion in recent publications on tissue optics. We compared several diffusion coefficients with the apparent diffusion coefficient from the more fundamental transport theory, D-app. Application to
Energy Technology Data Exchange (ETDEWEB)
Chicheportiche, Alexandre; Benhenni, Malika; Yousfi, Mohammed, E-mail: yousfi@laplace.univ-tlse.fr [Laboratoire Plasma et Conversion d’Energie, LAPLACE and UMR5213 du CNRS, Université de Toulouse, UPS, 118 route de Narbonne, 31062 Toulouse Cedex (France); Stachoň, Martin; Kalus, René, E-mail: rene.kalus@vsb.cz [Center of Excellence IT4Innovations and Department of Applied Mathematics, VSB - Technical University of Ostrava, 17. listopadu 15, 708 33 Ostrava (Czech Republic); Gadéa, Florent Xavier [Laboratoire de Chimie et de Physique Quantiques, IRSAMC and UMR5626 du CNRS, Université de Toulouse, UPS, 118 route de Narbonne, 31062 Toulouse Cedex (France)
2014-10-07
Momentum-transfer collision cross-sections and integral collision cross-sections for the collision-induced dissociation are calculated for collisions of ionized argon dimers with argon atoms using a nonadiabatic semiclassical method with the electronic Hamiltonian calculated on the fly via a diatomics-in-molecules semiempirical model as well as inverse-method modeling based on simple isotropic rigid-core potential. The collision cross-sections are then used in an optimized Monte Carlo code for evaluations of the Ar{sub 2}{sup +} mobility in argon gas, longitudinal diffusion coefficient, and collision-induced dissociation rates. A thorough comparison of various theoretical calculations as well as with available experimental data on the Ar{sub 2}{sup +} mobility and collision cross-sections is performed. Good agreement is found between both theoretical approaches and the experiment. Analysis of the role of inelastic processes in Ar{sub 2}{sup +}/Ar collisions is also provided.
Sun, Liyuan; Morales-Collazo, Oscar; Xia, Han; Brennecke, Joan F
2015-12-03
A series of room temperature ionic liquids (RTILs) based on 1-ethyl-3-methylimidazolium ([emim](+)) with different aprotic heterocyclic anions (AHAs) were synthesized and characterized as potential electrolyte candidates for lithium ion batteries. The density and transport properties of these ILs were measured over the temperature range between 283.15 and 343.15 K at ambient pressure. The temperature dependence of the transport properties (viscosity, ionic conductivity, self-diffusion coefficient, and molar conductivity) is fit well by the Vogel-Fulcher-Tamman (VFT) equation. The best-fit VFT parameters, as well as linear fits to the density, are reported. The ionicity of these ILs was quantified by the ratio of the molar conductivity obtained from the ionic conductivity and molar concentration to that calculated from the self-diffusion coefficients using the Nernst-Einstein equation. The results of this study, which is based on ILs composed of both a planar cation and planar anions, show that many of the [emim][AHA] ILs exhibit very good conductivity for their viscosities and provide insight into the design of ILs with enhanced dynamics that may be suitable for electrolyte applications.
Copeland, Kyle; Parker, Donald E; Friedberg, Wallace
2010-12-01
Conversion coefficients were calculated for fluence-to-absorbed dose, fluence-to-equivalent dose, fluence-to-effective dose and fluence-to-gray equivalent, for isotropic exposure of an adult male and an adult female to helions ((3)He(2+)) in the energy range of 10 MeV to 1 TeV (0.01-1000 GeV). Calculations were performed using Monte Carlo transport code MCNPX 2.7.C and BodyBuilder™ 1.3 anthropomorphic phantoms modified to allow calculation of effective dose using tissues and tissue weighting factors from either the 1990 or 2007 recommendations of the International Commission on Radiological Protection (ICRP), and gray equivalent to selected tissues as recommended by the National Council on Radiation Protection and Measurements. At 15 of the 19 energies for which coefficients for effective dose were calculated, coefficients based on ICRP 2007 and 1990 recommendations differed by less than 2%. The greatest difference, 62%, occurred at 100 MeV.
Energy Technology Data Exchange (ETDEWEB)
Phong, P.T., E-mail: ptphong.nh@khanhhoa.edu.vn [Department of Advanced Materials Chemistry, Dongguk University, 707 Suckjang-dong, Gyeongju-Si, Gyeonbuk 780-714 (Korea, Republic of); Nha Trang Pedagogic College, 01 Nguyen Chanh Street, Nha Trang, Khanh Hoa (Viet Nam); Nguyen, L.H. [Nha Trang Pedagogic College, 01 Nguyen Chanh Street, Nha Trang, Khanh Hoa (Viet Nam); Institute of Materials Science, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Road, Cau Giay, Ha Noi (Viet Nam); Manh, D.H.; Phuc, N.X. [Institute of Materials Science, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Road, Cau Giay, Ha Noi (Viet Nam); Lee, I.-J. [Department of Advanced Materials Chemistry, Dongguk University, 707 Suckjang-dong, Gyeongju-Si, Gyeonbuk 780-714 (Korea, Republic of)
2013-09-15
The temperature dependent resistivity and temperature coefficient of resistance of Ag doped La{sub 0.7−x}Ag{sub x}Ca{sub 0.3}MnO{sub 3} polycrystalline pellets (x=0, 0.05, 0.10, 0.15, and 0.20) are investigated. Ag substitution enhances the conductivity of this system. The Curie temperature also increases from 260 to 283 K with increasing Ag content. Using phase-coexistence transport model and phase separation model, we calculated the resistivity as a function of temperature and the temperature coefficient of resistivity (TCR) behavior. Comparing the calculated maximum TCR, we found that it is related to activation energy, transition temperature, and disorder in doped manganites. The relationship between the proposed TCR behavior and the transport parameters can suggest conditions improving TCR{sub max} of doped manganites for the use of the bolometric infrared detectors.
Ye, Qing; Kim, Yangmin; Steudle, Ernst
2006-05-01
The impact of unstirred layers (USLs) during cell pressure probe experiments with Chara corallina internodes has been quantified. The results show that the hydraulic conductivity (Lp) measured in hydrostatic relaxations was not significantly affected by USLs even in the presence of high water flow intensities ('sweep-away effect'). During pressure clamp, there was a reversible reduction in Lp by 20%, which was explained by the constriction of water to aquaporins (AQPs) in the C. corallina membrane and a rapid diffusional equilibration of solutes in arrays where water protruded across AQPs. In osmotic experiments, Lp, and permeability (Ps) and reflection (sigma s) coefficients increased as external flow rate of medium increased, indicating some effects of external USLs. However, the effect was levelling off at 'usual' flow rates of 0.20-0.30 m s(-1) and in the presence of vigorous stirring by air bubbles, suggesting a maximum thickness of external USLs of around 30 microm including the cell wall. Because the diameters of internodes were around 1 mm, internal USLs could have played a significant or even a dominating role, at least in the presence of the rapidly permeating solutes used [acetone, 2-propanol and dimethylformamide (DMF)]. A comparison of calculated (diffusion kinetics) and of measured permeabilities indicated an upper limit of the contribution of USLs for the rapidly moving solute acetone of 29%, and of 15% for the less rapidly permeating DME The results throw some doubt on recent claims that in C. corallina, USLs rather than the cell membrane dominate solute uptake, at least for the most rapidly moving solute acetone.
Sun, Liyuan; Morales-Collazo, Oscar; Xia, Han; Brennecke, Joan F
2016-06-30
A series of room-temperature ionic liquids (ILs) composed of triethyl(alkyl)phosphonium cations paired with three different aprotic heterocyclic anions (AHAs) (alkyl = butyl ([P2224](+)) and octyl ([P2228](+))) were prepared to investigate the effect of cationic alkyl chain length on transport properties. The transport properties and density of these ILs were measured from 283.15 to 343.15 K at ambient pressure. The dependence of the transport properties (viscosity, ionic conductivity, diffusivity, and molar conductivity) on temperature can be described by the Vogel-Fulcher-Tamman (VFT) equation. The ratio of the molar conductivity obtained from the molar concentration and ionic conductivity measurements to that calculated from self-diffusion coefficients (measured by pulsed gradient spin-echo nuclear magnetic resonance spectroscopy) using the Nernst-Einstein equation was used to quantify the ionicity of these ILs. The molar conductivity ratio decreases with increasing number of carbon atoms in the alkyl chain, indicating that the reduced Coulombic interactions resulting from lower density are more than balanced by the increased van der Waals interactions between the alkyl chains. The results of this study may provide insight into the design of ILs with enhanced dynamics that may be suitable as electrolytes in lithium ion batteries and other electrochemical applications.
Energy Technology Data Exchange (ETDEWEB)
Santos, Josilene C.; Gonzalez, Alejandro H.L.; Costa, Paulo R. [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Instituto de Fisica
2016-07-01
Brazilian regulation establishes 1.14 Sv/Gy as unique conversion coefficient to convert air-kerma into the operational quantity ambient dose equivalent H⁎(10) disregarding its beam quality dependence. The present study computed mean conversion coefficients from primary, secondary and transmitted X-ray beams through barite mortar plates used in shielding of dedicated chest radiographic facilities in order to improve the current assessment of H⁎(10). To compute the mean conversion coefficients, the weighting of conversion coefficients corresponding to monoenergetic beams with the spectrum energy distribution in terms of air-kerma was considered. The maximum difference between the obtained conversion coefficients and the constant value recommended in national regulation is 53.4%. The conclusion based on these results is that a constant coefficient is not adequate for deriving the H⁎(10) from air-kerma measurements. (author)
Siegel, Irving H.
The arithmetic processes of aggregation and averaging are basic to quantitative investigations of employment, unemployment, and related concepts. In explaining these concepts, this report stresses need for accuracy and consistency in measurements, and describes tools for analyzing alternative measures. (BH)
DEFF Research Database (Denmark)
Gramkow, Claus
1999-01-01
In this article two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very offten the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong...... approximations to the Riemannian metric, and that the subsequent corrections are inherient in the least squares estimation. Keywords: averaging rotations, Riemannian metric, matrix, quaternion...
A drying coefficient for building materials
DEFF Research Database (Denmark)
Scheffler, Gregor Albrecht; Plagge, Rudolf
2009-01-01
The drying experiment is an important element of the hygrothermal characterisation of building materials. Contrary to other moisture transport experiments as the vapour diffusion and the water absorption test, it is until now not possible to derive a simple coefficient for the drying. However...... coefficient is defined which can be determined based on measured drying data. The correlation of this coefficient with the water absorption and the vapour diffusion coefficient is analyzed and its additional information content is critically challenged. As result, a drying coefficient has been derived...... and defined as a new and independent material parameter. It contains information about the moisture transport properties throughout the wide range of moisture contents from hygroscopic up to saturation. With this new and valuable coefficient, it is now possible to distinguish and select building materials...
Young, Vershawn Ashanti
2004-01-01
"Your Average Nigga" contends that just as exaggerating the differences between black and white language leaves some black speakers, especially those from the ghetto, at an impasse, so exaggerating and reifying the differences between the races leaves blacks in the impossible position of either having to try to be white or forever struggling to…
DEFF Research Database (Denmark)
Gramkow, Claus
2001-01-01
In this paper two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very often the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong...
On the attenuation coefficient of monomode periodic waveguides
Baron, Alexandre; Smigaj, Wojciech; Lalanne, Philippe
2011-01-01
It is widely accepted that, on ensemble average, the transmission T of guided modes decays exponentially with the waveguide length L due to small imperfections, leading to the important figure of merit defined as the attenuation-rate coefficient alpha = -/L. In this letter, we evidence that the exponential-damping law is not valid in general for periodic monomode waveguides, especially as the group velocity decreases. This result that contradicts common beliefs and experimental practices aiming at measuring alpha is supported by a theoretical study of light transport in the limit of very small imperfections, and by numerical results obtained for two waveguide geometries that offer contrasted damping behaviours.
Covariant approximation averaging
Shintani, Eigo; Blum, Thomas; Izubuchi, Taku; Jung, Chulwoo; Lehner, Christoph
2014-01-01
We present a new class of statistical error reduction techniques for Monte-Carlo simulations. Using covariant symmetries, we show that correlation functions can be constructed from inexpensive approximations without introducing any systematic bias in the final result. We introduce a new class of covariant approximation averaging techniques, known as all-mode averaging (AMA), in which the approximation takes account of contributions of all eigenmodes through the inverse of the Dirac operator computed from the conjugate gradient method with a relaxed stopping condition. In this paper we compare the performance and computational cost of our new method with traditional methods using correlation functions and masses of the pion, nucleon, and vector meson in $N_f=2+1$ lattice QCD using domain-wall fermions. This comparison indicates that AMA significantly reduces statistical errors in Monte-Carlo calculations over conventional methods for the same cost.
Factorization of Transport Coefficients in Macroporous Media
DEFF Research Database (Denmark)
Shapiro, Alexander; Stenby, Erling Halfdan
2000-01-01
of the multicomponent fluid saturating the porous space. The two permeabilities of the porous medium, the convective and the diffusional ones, are separated. A similarity between the diffusional permeability and the porosity-tortuosity factor of the Kozeny-Carman theory is demonstrated. We do not make any specific...
Transport Coefficients of Black M3-Branes
Dhuria, Mansi
2014-01-01
The local uplift via local SYZ mirror symmetry of (M)N (fractional)D3-branes, and wrapped N_f flavor D7-branes in the presence of a black-hole resulting in a non-Kaehler resolved warped deformed conifold (NKRWDC) in [1], was carried out in [2] and resulted in black M3-branes; the deviation from the ISD condition of G_3 proportional to the square of the resolution parameter, in the limits of [1] and MQGP limit of [2], imposed on (g_s,M,N), can be ignored [3]. The uplift, if valid globally, asymptotes to M5-branes wrapping a two-cycle (homologously an (large) integer sum of two-spheres) in AdS_5xM_6. Interestingly, in the limits of [1]/ [2], assuming the deformation > resolution, by estimating the five SU(3) structure torsion (\\tau) classes W_{1,2,3,4,5} we show that \\tau\\in W_5 in the large-r limit, implying the NKRWDC reduces to a warped Kaehler deformed conifold. Further, the local T^3 of [2] in the large-r limit and the limits of [1] and the `MQGP' limit of [2], satisfies the same conditions as the maximal ...
Transport coefficient and heat pulse propagation
Energy Technology Data Exchange (ETDEWEB)
Yamaguchi, Hiroki; Itoh, Sanae-I.; Kubota, Tetsuyuki; Toda, Shinichiro [Kyushu Univ., Fukuoka (Japan); Hanada, Kazuaki [Tokyo Univ. (Japan)
1995-04-01
The problem of deducing {Chi}{sub e} from heat pulse propagation measurements is addressed. It is indicated that diffusive models can not explain the experimental observations on WT-3 tokamak. The equation taking account of the convective term gives a good fit to experimental results. It may indicate that for the sawtooth free plasma, there exists a convection of heat pulse. 9 refs., 4 figs., 1 tab.
Negative Average Preference Utilitarianism
Directory of Open Access Journals (Sweden)
Roger Chao
2012-03-01
Full Text Available For many philosophers working in the area of Population Ethics, it seems that either they have to confront the Repugnant Conclusion (where they are forced to the conclusion of creating massive amounts of lives barely worth living, or they have to confront the Non-Identity Problem (where no one is seemingly harmed as their existence is dependent on the “harmful” event that took place. To them it seems there is no escape, they either have to face one problem or the other. However, there is a way around this, allowing us to escape the Repugnant Conclusion, by using what I will call Negative Average Preference Utilitarianism (NAPU – which though similar to anti-frustrationism, has some important differences in practice. Current “positive” forms of utilitarianism have struggled to deal with the Repugnant Conclusion, as their theory actually entails this conclusion; however, it seems that a form of Negative Average Preference Utilitarianism (NAPU easily escapes this dilemma (it never even arises within it.
Wave Reflection Coefficient Spectrum
Institute of Scientific and Technical Information of China (English)
俞聿修; 邵利民; 柳淑学
2003-01-01
The wave reflection coefficient frequency spectrum and directional spectrum for concrete face slope breakwaters and rubble mound breakwaters are investigated through physical model tests in the present study. The reflection coefficients of oblique irregular waves are analyzed by the Modified Two-Point Method (MTPM) proposed by the authors. The results show that the wave reflection coefficient decreases with increasing wave frequency and incident angle or decreasing structure slope. The reflection coefficient frequency spectrum and its variation with Iribarren number are given in this paper. The paper also suggests an empirical 3-dimensional reflection coefficient spectrum, i.e. reflection coefficient directional spectrum, which can be used to illustrate quantitatively the variation of reflection coefficient with the incident angle and the Iribarren number for oblique irregular waves.
Model averaging and muddled multimodel inferences.
Cade, Brian S
2015-09-01
Three flawed practices associated with model averaging coefficients for predictor variables in regression models commonly occur when making multimodel inferences in analyses of ecological data. Model-averaged regression coefficients based on Akaike information criterion (AIC) weights have been recommended for addressing model uncertainty but they are not valid, interpretable estimates of partial effects for individual predictors when there is multicollinearity among the predictor variables. Multicollinearity implies that the scaling of units in the denominators of the regression coefficients may change across models such that neither the parameters nor their estimates have common scales, therefore averaging them makes no sense. The associated sums of AIC model weights recommended to assess relative importance of individual predictors are really a measure of relative importance of models, with little information about contributions by individual predictors compared to other measures of relative importance based on effects size or variance reduction. Sometimes the model-averaged regression coefficients for predictor variables are incorrectly used to make model-averaged predictions of the response variable when the models are not linear in the parameters. I demonstrate the issues with the first two practices using the college grade point average example extensively analyzed by Burnham and Anderson. I show how partial standard deviations of the predictor variables can be used to detect changing scales of their estimates with multicollinearity. Standardizing estimates based on partial standard deviations for their variables can be used to make the scaling of the estimates commensurate across models, a necessary but not sufficient condition for model averaging of the estimates to be sensible. A unimodal distribution of estimates and valid interpretation of individual parameters are additional requisite conditions. The standardized estimates or equivalently the t
Model averaging and muddled multimodel inferences
Cade, Brian S.
2015-01-01
Three flawed practices associated with model averaging coefficients for predictor variables in regression models commonly occur when making multimodel inferences in analyses of ecological data. Model-averaged regression coefficients based on Akaike information criterion (AIC) weights have been recommended for addressing model uncertainty but they are not valid, interpretable estimates of partial effects for individual predictors when there is multicollinearity among the predictor variables. Multicollinearity implies that the scaling of units in the denominators of the regression coefficients may change across models such that neither the parameters nor their estimates have common scales, therefore averaging them makes no sense. The associated sums of AIC model weights recommended to assess relative importance of individual predictors are really a measure of relative importance of models, with little information about contributions by individual predictors compared to other measures of relative importance based on effects size or variance reduction. Sometimes the model-averaged regression coefficients for predictor variables are incorrectly used to make model-averaged predictions of the response variable when the models are not linear in the parameters. I demonstrate the issues with the first two practices using the college grade point average example extensively analyzed by Burnham and Anderson. I show how partial standard deviations of the predictor variables can be used to detect changing scales of their estimates with multicollinearity. Standardizing estimates based on partial standard deviations for their variables can be used to make the scaling of the estimates commensurate across models, a necessary but not sufficient condition for model averaging of the estimates to be sensible. A unimodal distribution of estimates and valid interpretation of individual parameters are additional requisite conditions. The standardized estimates or equivalently the
Modified Biserial Correlation Coefficients.
Kraemer, Helena Chmura
1981-01-01
Asymptotic distribution theory of Brogden's form of biserial correlation coefficient is derived and large sample estimates of its standard error obtained. Its relative efficiency to the biserial correlation coefficient is examined. Recommendations for choice of estimator of biserial correlation are presented. (Author/JKS)
A Simple Geometrical Derivation of the Spatial Averaging Theorem.
Whitaker, Stephen
1985-01-01
The connection between single phase transport phenomena and multiphase transport phenomena is easily accomplished by means of the spatial averaging theorem. Although different routes to the theorem have been used, this paper provides a route to the averaging theorem that can be used in undergraduate classes. (JN)
Kinetic energy equations for the average-passage equation system
Johnson, Richard W.; Adamczyk, John J.
1989-01-01
Important kinetic energy equations derived from the average-passage equation sets are documented, with a view to their interrelationships. These kinetic equations may be used for closing the average-passage equations. The turbulent kinetic energy transport equation used is formed by subtracting the mean kinetic energy equation from the averaged total instantaneous kinetic energy equation. The aperiodic kinetic energy equation, averaged steady kinetic energy equation, averaged unsteady kinetic energy equation, and periodic kinetic energy equation, are also treated.
Kinetic energy equations for the average-passage equation system
Johnson, Richard W.; Adamczyk, John J.
1989-01-01
Important kinetic energy equations derived from the average-passage equation sets are documented, with a view to their interrelationships. These kinetic equations may be used for closing the average-passage equations. The turbulent kinetic energy transport equation used is formed by subtracting the mean kinetic energy equation from the averaged total instantaneous kinetic energy equation. The aperiodic kinetic energy equation, averaged steady kinetic energy equation, averaged unsteady kinetic energy equation, and periodic kinetic energy equation, are also treated.
Accessibility of a Destination-Based Transportation System: A Large Airport Study
Institute of Scientific and Technical Information of China (English)
SHI Jing; YING Xiwen
2008-01-01
The accessibility of a destination-based transportation system is defined to quantify the perform-ance of transportation systems which access a distinct destination. The access cost is used to reflect the utility of the transportation system including the fatigue and inconvenience in the total cost. The cost is quan-tified by two coefficients which represent the different characteristics of various people. The average cost and the income-relative accessibility are used to describe various aspects of the accessibility and to evaluate the accessibility of a destination-based system. A case study uses data from the Kunming transpor-tation system to evaluate the accessibility of the present city airport. The calibrated coefficients are then used to evaluate the transportation system to the new Kunming international airport. The results show that this transportation accessibility evaluation can be combined with transportation planning to study transporta-tion sub-systems.
Physical Theories with Average Symmetry
Alamino, Roberto C.
2013-01-01
This Letter probes the existence of physical laws invariant only in average when subjected to some transformation. The concept of a symmetry transformation is broadened to include corruption by random noise and average symmetry is introduced by considering functions which are invariant only in average under these transformations. It is then shown that actions with average symmetry obey a modified version of Noether's Theorem with dissipative currents. The relation of this with possible violat...
Average Convexity in Communication Situations
Slikker, M.
1998-01-01
In this paper we study inheritance properties of average convexity in communication situations. We show that the underlying graph ensures that the graphrestricted game originating from an average convex game is average convex if and only if every subgraph associated with a component of the underlyin
Sampling Based Average Classifier Fusion
Directory of Open Access Journals (Sweden)
Jian Hou
2014-01-01
fusion algorithms have been proposed in literature, average fusion is almost always selected as the baseline for comparison. Little is done on exploring the potential of average fusion and proposing a better baseline. In this paper we empirically investigate the behavior of soft labels and classifiers in average fusion. As a result, we find that; by proper sampling of soft labels and classifiers, the average fusion performance can be evidently improved. This result presents sampling based average fusion as a better baseline; that is, a newly proposed classifier fusion algorithm should at least perform better than this baseline in order to demonstrate its effectiveness.
The average free volume model for liquids
Yu, Yang
2014-01-01
In this work, the molar volume thermal expansion coefficient of 59 room temperature ionic liquids is compared with their van der Waals volume Vw. Regular correlation can be discerned between the two quantities. An average free volume model, that considers the particles as hard core with attractive force, is proposed to explain the correlation in this study. A combination between free volume and Lennard-Jones potential is applied to explain the physical phenomena of liquids. Some typical simple liquids (inorganic, organic, metallic and salt) are introduced to verify this hypothesis. Good agreement from the theory prediction and experimental data can be obtained.
Effective Block-Scale Dispersion and Its Self-Averaging Behavior in Heterogeneous Porous Media
de Barros, Felipe; Dentz, Marco
2015-04-01
Upscaled (effective) dispersion coefficients in spatially heterogeneous flow fields must (1) account for the sub-scale variability that is filtered out by homogenization and (2) be modeled as a random function to incorporate the uncertainty associated with non-ergodic solute bodies. In this study, we use the framework developed in de Barros and Rubin (2011) [de Barros F.P.J. and Rubin Y., Modelling of block-scale macrodispersion as a random function. Journal of Fluid Mechanics 676 (2011): 514-545] to develop novel semi-analytical expressions for the first two statistical moments of the block-effective dispersion coefficients in three-dimensional spatially random flow fields as a function of the key characteristic length scales defining the transport problem. The derived expressions are based on perturbation theory and limited to weak-to-mild heterogeneity and uniform-in-the-mean steady state flow fields. The semi-analytical solutions provide physical insights of the main controlling factors influencing the temporal scaling of the dispersion coefficient of the solute body and its self-averaging dispersion behavior. Our results illustrate the relevance of the joint influence of the block-scale and local-scale dispersion in diminishing the macrodispersion variance under non-ergodic conditions. The impact of the statistical anisotropy ratio in the block-effective macrodispersion self-averaging behavior is also investigated. The analysis performed in this work has implications in numerical modeling and grid design.
Attenuation Coefficient of Single-Mode Periodic Waveguides
Baron, A.; Mazoyer, S.; Smigaj, W.; Lalanne, P.
2011-10-01
It is widely accepted that, on ensemble average, the transmission T of guided modes decays exponentially with the waveguide length L due to small imperfections, leading to the important figure of merit defined as the attenuation-rate coefficient α=-⟨ln(T)⟩/L. In this Letter, we evidence that the exponential-damping law is not valid in general for periodic monomode waveguides, especially as the group velocity decreases. This result, that contradicts common beliefs and experimental practices aiming at measuring α, is supported by a theoretical study of light transport in the limit of very small imperfections, and by numerical results obtained for two waveguide geometries that offer contrasted damping behaviors.
An alternative coefficient for sound absorption
Wijnant, Y.H.; Kuipers, E.R.; Boer, de A.; Sas, P.; Jonckheere, S.; Moens, D.
2013-01-01
The acoustic absorption coefficient is a number that indicates which fraction of the incident acoustic power impinging on a surface is being absorbed. The incident acoustic power is obtained by spatial integration of the incident intensity, which is (classically) defined as the time-averaged intensi
Multidimensional extremal dependence coefficients
2017-01-01
Extreme values modeling has attracting the attention of researchers in diverse areas such as the environment, engineering, or finance. Multivariate extreme value distributions are particularly suitable to model the tails of multidimensional phenomena. The analysis of the dependence among multivariate maxima is useful to evaluate risk. Here we present new multivariate extreme value models, as well as, coefficients to assess multivariate extremal dependence.
Physical Theories with Average Symmetry
Alamino, Roberto C
2013-01-01
This Letter probes the existence of physical laws invariant only in average when subjected to some transformation. The concept of a symmetry transformation is broadened to include corruption by random noise and average symmetry is introduced by considering functions which are invariant only in average under these transformations. It is then shown that actions with average symmetry obey a modified version of Noether's Theorem with dissipative currents. The relation of this with possible violations of physical symmetries, as for instance Lorentz invariance in some quantum gravity theories, is briefly commented.
Institute of Scientific and Technical Information of China (English)
周斌; 李建民; 刘正江
2009-01-01
本文从共同海损的概念出发,说明了共同海损制度的基础,接下来论述了承运人的免责范围与共同海损范围的关系,分别从海牙规则和汉堡规则关于承运人责任制度的规定阐明了其对共同海损制度的影响,在此基础之上,分析了UNCITRAL运输法公约对共同海损的影响--对航海过失免责的取消冲击了共损的基础,使得共损调整范围的缩小和案件的减少.%Starting with the concept of general average,this paper illustrates the foundation thereof,then deals with the relation between scope of exemption and of general average, alternatively clarifies the influence of the provisions to general average in Hague Rules and Hamburg Rules,which concerns the principal of carrier's liability,basing upon this,analyzes the influence of UNCITRAL Transport law Convention to general average,which, having abolished the exemption of nautical fault,shakes the foundation of general average, reduces the scope thereof and the number.
Prestarlike functions with negative coefficients
Directory of Open Access Journals (Sweden)
H. Silverman
1979-01-01
Full Text Available The extreme points for prestarlike functions having negative coefficients are determined. Coefficient, distortion and radii of univalence, starlikeness, and convexity theorems are also obtained.
Quantized average consensus with delay
Jafarian, Matin; De Persis, Claudio
2012-01-01
Average consensus problem is a special case of cooperative control in which the agents of the network asymptotically converge to the average state (i.e., position) of the network by transferring information via a communication topology. One of the issues of the large scale networks is the cost of co
Gorenstein Hilbert Coefficients
Khoury, Sabine El
2012-01-01
We prove upper and lower bounds for all the coefficients in the Hilbert Polynomial of a graded Gorenstein algebra $S=R/I$ with a quasi-pure resolution over $R$. The bounds are in terms of the minimal and the maximal shifts in the resolution of $R$ . These bounds are analogous to the bounds for the multiplicity found in \\cite{S} and are stronger than the bounds for the Cohen Macaulay algebras found in \\cite{HZ}.
Parameterization of Time-Averaged Suspended Sediment Concentration in the Nearshore
Directory of Open Access Journals (Sweden)
Hyun-Doug Yoon
2015-11-01
Full Text Available To quantify the effect of wave breaking turbulence on sediment transport in the nearshore, the vertical distribution of time-averaged suspended sediment concentration (SSC in the surf zone was parameterized in terms of the turbulent kinetic energy (TKE at different cross-shore locations, including the bar crest, bar trough, and inner surf zone. Using data from a large-scale laboratory experiment, a simple relationship was developed between the time-averaged SSC and the time-averaged TKE. The vertical variation of the time-averaged SSC was fitted to an equation analogous to the turbulent dissipation rate term. At the bar crest, the proposed equation was slightly modified to incorporate the effect of near-bed sediment processes and yielded reasonable agreement. This parameterization yielded the best agreement at the bar trough, with a coefficient of determination R2 ≥ 0.72 above the bottom boundary layer. The time-averaged SSC in the inner surf zone showed good agreement near the bed but poor agreement near the water surface, suggesting that there is a different sedimentation mechanism that controls the SSC in the inner surf zone.
Gaussian moving averages and semimartingales
DEFF Research Database (Denmark)
Basse-O'Connor, Andreas
2008-01-01
In the present paper we study moving averages (also known as stochastic convolutions) driven by a Wiener process and with a deterministic kernel. Necessary and sufficient conditions on the kernel are provided for the moving average to be a semimartingale in its natural filtration. Our results...... are constructive - meaning that they provide a simple method to obtain kernels for which the moving average is a semimartingale or a Wiener process. Several examples are considered. In the last part of the paper we study general Gaussian processes with stationary increments. We provide necessary and sufficient...
The Truth About Ballistic Coefficients
Courtney, Michael
2007-01-01
The ballistic coefficient of a bullet describes how it slows in flight due to air resistance. This article presents experimental determinations of ballistic coefficients showing that the majority of bullets tested have their previously published ballistic coefficients exaggerated from 5-25% by the bullet manufacturers. These exaggerated ballistic coefficients lead to inaccurate predictions of long range bullet drop, retained energy and wind drift.
Fourier coefficient description of left ventricular shape.
Round, W H; Bates, R H; Ikram, H
1991-12-01
A method of quantifying the shape of the left ventricle of the heart as seen in 2D echocardiograms was developed. It is based on describing the shape in terms of the coefficients a fifth-order trigonometric Fourier series. Such a series has eleven Fourier coefficients which is too large a number for clinical application so pairs of coefficients are combined to give six coefficients (alpha 0, alpha 1, ... , alpha 5). A trial was conducted to test the ability of the coefficient description to classify subjects as having normal right ventricles or ventricles with an apical abnormality. The tests showed that one of the coefficients (alpha 2) was higher for the subjects with an apical abnormality and that this difference increased with exercise. This is as was expected. However, it was found to be difficult to get a reliable estimate of alpha 2 from a single scan of a patient and that it is therefore probably necessary to average data from several scans to obtain a reliable alpha 2 value for a single patient.
Kinetic transport simulation of energetic particles
Sheng, He; Waltz, R. E.
2016-05-01
A kinetic transport code (EPtran) is developed for the transport of the energetic particles (EPs). The EPtran code evolves the EP distribution function in radius, energy, and pitch angle phase space (r, E, λ) to steady state with classical slowing down, pitch angle scattering, as well as radial and energy transport of the injected EPs (neutral beam injection (NBI) or fusion alpha). The EPtran code is illustrated by treating the transport of NBI fast ions from high-n ITG/TEM micro-turbulence and EP driven unstable low-n Alfvén eigenmodes (AEs) in a well-studied DIII-D NBI heated discharge with significant AE central core loss. The kinetic transport code results for this discharge are compared with previous study using a simple EP density moment transport code ALPHA (R.E. Waltz and E.M. Bass 2014 Nucl. Fusion 54 104006). The dominant EP-AE transport is treated with a local stiff critical EP density (or equivalent pressure) gradient radial transport model modified to include energy-dependence and the nonlocal effects EP drift orbits. All previous EP transport models assume that the EP velocity space distribution function is not significantly distorted from the classical ‘no transport’ slowing down distribution. Important transport distortions away from the slowing down EP spectrum are illustrated by a focus on the coefficient of convection: EP energy flux divided by the product of EP average energy and EP particle flux.
Shear Viscosity Coefficient from Microscopic Models
Muronga, A
2004-01-01
The transport coefficient of shear viscosity is studied for a hadron matter through microscopic transport model, the Ultra--relativistic Quantum Molecular Dynamics (UrQMD), using the Green--Kubo formulas. Molecular--dynamical simulations are performed for a system of light mesons in a box with periodic boundary conditions. Starting from an initial state composed of $\\pi, \\eta ,\\omega ,\\rho ,\\phi$ with a uniform phase--space distribution, the evolution takes place through elastic collisions, production and annihilation. The system approaches a stationary state of mesons and their resonances, which is characterized by common temperature. After equilibration, thermodynamic quantities such as the energy density, particle density, and pressure are calculated. From such an equilibrated state the shear viscosity coefficient is calculated from the fluctuations of stress tensor around equilibrium using Green--Kubo relations. We do our simulations here at zero net baryon density so that the equilibration times depend o...
Vocal attractiveness increases by averaging.
Bruckert, Laetitia; Bestelmeyer, Patricia; Latinus, Marianne; Rouger, Julien; Charest, Ian; Rousselet, Guillaume A; Kawahara, Hideki; Belin, Pascal
2010-01-26
Vocal attractiveness has a profound influence on listeners-a bias known as the "what sounds beautiful is good" vocal attractiveness stereotype [1]-with tangible impact on a voice owner's success at mating, job applications, and/or elections. The prevailing view holds that attractive voices are those that signal desirable attributes in a potential mate [2-4]-e.g., lower pitch in male voices. However, this account does not explain our preferences in more general social contexts in which voices of both genders are evaluated. Here we show that averaging voices via auditory morphing [5] results in more attractive voices, irrespective of the speaker's or listener's gender. Moreover, we show that this phenomenon is largely explained by two independent by-products of averaging: a smoother voice texture (reduced aperiodicities) and a greater similarity in pitch and timbre with the average of all voices (reduced "distance to mean"). These results provide the first evidence for a phenomenon of vocal attractiveness increases by averaging, analogous to a well-established effect of facial averaging [6, 7]. They highlight prototype-based coding [8] as a central feature of voice perception, emphasizing the similarity in the mechanisms of face and voice perception.
DEFF Research Database (Denmark)
Shekarchi, Sayedali; Hallam, John; Christensen-Dalsgaard, Jakob
2013-01-01
-moving-average (ARMA) filters whose coefficients are calculated using Prony's method. Such filters are specified by a few coefficients which can generate the full head-related impulse responses (HRIRs). Next, Legendre polynomials (LPs) are used to compress the ARMA filter coefficients. LPs are derived on the sphere...
The solid-phase diffusion coefficient (Dm) and material-air partition coefficient (Kma) are key parameters for characterizing the sources and transport of semivolatile organic compounds (SVOCs) in the indoor environment. In this work, a new experimental method was developed to es...
A One Line Derivation of DCC: Application of a Vector Random Coefficient Moving Average Process
C.M. Hafner (Christian); M.J. McAleer (Michael)
2014-01-01
markdownabstract__Abstract__ One of the most widely-used multivariate conditional volatility models is the dynamic conditional correlation (or DCC) specification. However, the underlying stochastic process to derive DCC has not yet been established, which has made problematic the derivation of asym
Averaged Electroencephalic Audiometry in Infants
Lentz, William E.; McCandless, Geary A.
1971-01-01
Normal, preterm, and high-risk infants were tested at 1, 3, 6, and 12 months of age using averaged electroencephalic audiometry (AEA) to determine the usefulness of AEA as a measurement technique for assessing auditory acuity in infants, and to delineate some of the procedural and technical problems often encountered. (KW)
Ergodic averages via dominating processes
DEFF Research Database (Denmark)
Møller, Jesper; Mengersen, Kerrie
2006-01-01
We show how the mean of a monotone function (defined on a state space equipped with a partial ordering) can be estimated, using ergodic averages calculated from upper and lower dominating processes of a stationary irreducible Markov chain. In particular, we do not need to simulate the stationary ...
Sen, Shuvam
2012-01-01
In this paper, a new family of implicit compact finite difference schemes for computation of unsteady convection-diffusion equation with variable convection coefficient is proposed. The schemes are fourth order accurate in space and second or lower order accurate in time depending on the choice of weighted time average parameter. The proposed schemes, where transport variable and its first derivatives are carried as the unknowns, combine virtues of compact discretization and Pad\\'{e} scheme for spatial derivative. These schemes which are based on five point stencil with constant coefficients, named as \\emph{(5,5) Constant Coefficient 4th Order Compact} [(5,5)CC-4OC], give rise to a diagonally dominant system of equations and shows higher accuracy and better phase and amplitude error characteristics than some of the standard methods. These schemes are capable of using a grid aspect ratio other than unity and are unconditionally stable. They efficiently capture both transient and steady solutions of linear and ...
Methods for Accurate Free Flight Measurement of Drag Coefficients
Courtney, Elya; Courtney, Michael
2015-01-01
This paper describes experimental methods for free flight measurement of drag coefficients to an accuracy of approximately 1%. There are two main methods of determining free flight drag coefficients, or equivalent ballistic coefficients: 1) measuring near and far velocities over a known distance and 2) measuring a near velocity and time of flight over a known distance. Atmospheric conditions must also be known and nearly constant over the flight path. A number of tradeoffs are important when designing experiments to accurately determine drag coefficients. The flight distance must be large enough so that the projectile's loss of velocity is significant compared with its initial velocity and much larger than the uncertainty in the near and/or far velocity measurements. On the other hand, since drag coefficients and ballistic coefficients both depend on velocity, the change in velocity over the flight path should be small enough that the average drag coefficient over the path (which is what is really determined)...
Converting Sabine absorption coefficients to random incidence absorption coefficients
DEFF Research Database (Denmark)
Jeong, Cheol-Ho
2013-01-01
Absorption coefficients measured by the chamber method are referred to as Sabine absorption coefficients, which sometimes exceed unity due to the finite size of a sample and non-uniform intensity in the reverberation chambers under test. In this study, conversion methods from Sabine absorption...... coefficients to random incidence absorption coefficients are proposed. The overestimations of the Sabine absorption coefficient are investigated theoretically based on Miki's model for porous absorbers backed by a rigid wall or an air cavity, resulting in conversion factors. Additionally, three optimizations...
Thermodynamical and microscopic properties of turbulent transport in the edge plasma
Ghendrih, Ph; Norscini, C.; Hasenbeck, F.; Dif-Pradalier, G.; Abiteboul, J.; Cartier-Michaud, T.; Garbet, X.; Grandgirard, V.; Marandet, Y.; Sarazin, Y.; Tamain, P.; Zarzoso, D.
2012-12-01
Edge plasma turbulence modelled with 2D interchange is shown to exhibit convective transport at the microscale level. This transport property is related to avalanche like transport in such a flux-driven system. Correlation functions and source modulation are used to analyse the transport properties but do not allow one to recover the Fick law that must characterise the system at large scales. Coarse graining is then introduced to average out the small scales in order to recover the Fick law. One finds that the required space averaging is comparable to the system size while the time averaging is comparable to the confinement time. The system is then reduced to a single reservoir such that transport is characterised by a single scalar, either the diffusion coefficient of the Fick law or a characteristic evolution time constant.
High average power supercontinuum sources
Indian Academy of Sciences (India)
J C Travers
2010-11-01
The physical mechanisms and basic experimental techniques for the creation of high average spectral power supercontinuum sources is briefly reviewed. We focus on the use of high-power ytterbium-doped fibre lasers as pump sources, and the use of highly nonlinear photonic crystal fibres as the nonlinear medium. The most common experimental arrangements are described, including both continuous wave fibre laser systems with over 100 W pump power, and picosecond mode-locked, master oscillator power fibre amplifier systems, with over 10 kW peak pump power. These systems can produce broadband supercontinua with over 50 and 1 mW/nm average spectral power, respectively. Techniques for numerical modelling of the supercontinuum sources are presented and used to illustrate some supercontinuum dynamics. Some recent experimental results are presented.
Dependability in Aggregation by Averaging
Jesus, Paulo; Almeida, Paulo Sérgio
2010-01-01
Aggregation is an important building block of modern distributed applications, allowing the determination of meaningful properties (e.g. network size, total storage capacity, average load, majorities, etc.) that are used to direct the execution of the system. However, the majority of the existing aggregation algorithms exhibit relevant dependability issues, when prospecting their use in real application environments. In this paper, we reveal some dependability issues of aggregation algorithms based on iterative averaging techniques, giving some directions to solve them. This class of algorithms is considered robust (when compared to common tree-based approaches), being independent from the used routing topology and providing an aggregation result at all nodes. However, their robustness is strongly challenged and their correctness often compromised, when changing the assumptions of their working environment to more realistic ones. The correctness of this class of algorithms relies on the maintenance of a funda...
Measuring Complexity through Average Symmetry
Alamino, Roberto C.
2015-01-01
This work introduces a complexity measure which addresses some conflicting issues between existing ones by using a new principle - measuring the average amount of symmetry broken by an object. It attributes low (although different) complexity to either deterministic or random homogeneous densities and higher complexity to the intermediate cases. This new measure is easily computable, breaks the coarse graining paradigm and can be straightforwardly generalised, including to continuous cases an...
49 CFR 537.9 - Determination of fuel economy values and average fuel economy.
2010-10-01
... 49 Transportation 6 2010-10-01 2010-10-01 false Determination of fuel economy values and average fuel economy. 537.9 Section 537.9 Transportation Other Regulations Relating to Transportation... ECONOMY REPORTS § 537.9 Determination of fuel economy values and average fuel economy. (a)...
Influence of Dynamical Change of Edges on Clustering Coefficients
Directory of Open Access Journals (Sweden)
Yuhong Ruan
2015-01-01
Full Text Available Clustering coefficient is a very important measurement in complex networks, and it describes the average ratio between the actual existent edges and probable existent edges in the neighbor of one vertex in a complex network. Besides, in a complex networks, the dynamic change of edges can trigger directly the evolution of network and further affect the clustering coefficients. As a result, in this paper, we investigate the effects of the dynamic change of edge on the clustering coefficients. It is illustrated that the increase and decrease of the clustering coefficient can be effectively controlled by adding or deleting several edges of the network in the evolution of complex networks.
Mirror averaging with sparsity priors
Dalalyan, Arnak
2010-01-01
We consider the problem of aggregating the elements of a (possibly infinite) dictionary for building a decision procedure, that aims at minimizing a given criterion. Along with the dictionary, an independent identically distributed training sample is available, on which the performance of a given procedure can be tested. In a fairly general set-up, we establish an oracle inequality for the Mirror Averaging aggregate based on any prior distribution. This oracle inequality is applied in the context of sparse coding for different problems of statistics and machine learning such as regression, density estimation and binary classification.
Impact of connected vehicle guidance information on network-wide average travel time
Directory of Open Access Journals (Sweden)
Jiangfeng Wang
2016-12-01
Full Text Available With the emergence of connected vehicle technologies, the potential positive impact of connected vehicle guidance on mobility has become a research hotspot by data exchange among vehicles, infrastructure, and mobile devices. This study is focused on micro-modeling and quantitatively evaluating the impact of connected vehicle guidance on network-wide travel time by introducing various affecting factors. To evaluate the benefits of connected vehicle guidance, a simulation architecture based on one engine is proposed representing the connected vehicle–enabled virtual world, and connected vehicle route guidance scenario is established through the development of communication agent and intelligent transportation systems agents using connected vehicle application programming interface considering the communication properties, such as path loss and transmission power. The impact of connected vehicle guidance on network-wide travel time is analyzed by comparing with non-connected vehicle guidance in response to different market penetration rate, following rate, and congestion level. The simulation results explore that average network-wide travel time in connected vehicle guidance shows a significant reduction versus that in non–connected vehicle guidance. Average network-wide travel time in connected vehicle guidance have an increase of 42.23% comparing to that in non-connected vehicle guidance, and average travel time variability (represented by the coefficient of variance increases as the travel time increases. Other vital findings include that higher penetration rate and following rate generate bigger savings of average network-wide travel time. The savings of average network-wide travel time increase from 17% to 38% according to different congestion levels, and savings of average travel time in more serious congestion have a more obvious improvement for the same penetration rate or following rate.
Sabine absorption coefficients to random incidence absorption coefficients
DEFF Research Database (Denmark)
Jeong, Cheol-Ho
2014-01-01
Absorption coefficients measured by the chamber method are referred to as Sabine absorption coefficients, which sometimes exceed unity due to the finite size of a specimen and non-uniform intensity in the test chamber. In this study, several methods that convert Sabine absorption coefficients...... into random incidence absorption coefficients for porous absorbers are investigated. Two optimization-based conversion methods are suggested: the surface impedance estimation for locally reacting absorbers and the flow resistivity estimation for extendedly reacting absorbers. The suggested conversion methods...
Ruíz-Vargas, G.; Yousfi, M.; de Urquijo, J.
2010-11-01
This paper presents the simultaneous measurement and calculation of the electron drift velocity in binary and ternary mixtures of N2, O2, CO2 with H2O. The main aim of this study has been the generation of a self-consistent set of validated collision cross sections that explain thoroughly the dependence of the electron drift velocity in the above pure gases and their mixtures. In doing this, changes to the collision cross section set for H2O had to be made, while all other cross section sets remained unchanged. It is worth mentioning that only a few experiments had been performed before dealing with water mixtures. The electron drift velocities in the binary and ternary mixtures under study show the effects of negative differential conductivity, and this has been explained thoroughly in terms of the collision cross sections and electron distribution functions through a multi-term Boltzmann code. It is important to note that two-term codes fail to predict the dependence of the drift velocity at low water concentrations and low E/N values. Calculated values of longitudinal and transverse diffusion coefficients, mean energies and distribution functions are also given over the E/N range 0.1 Td-2 kTd (1 Td = 10-17 V cm2).
Spin transport properties in double quantum rings connected in series*
Institute of Scientific and Technical Information of China (English)
Du Jian; Wang Suxin; Pan Jianghong
2011-01-01
A new model of metal/semiconductor/metal double-quantum-ring connected in series is proposed and the transport properties in this model are theoretically studied. The results imply that the transmission coefficient shows periodic variations with increasing semiconductor ring size. The effects of the magnetic field and Rashba spin-orbit interaction on the transmission coefficient for two kinds of spin state electrons are different. The number of the transmission coefficient peaks is related to the length ratio between the upper ann and the half circumference of the ring. In addition, the transmission coefficient shows oscillation behavior with enhanced external magnetic field, and the corresponding average value is related to the two leads' relative position.
Energy Technology Data Exchange (ETDEWEB)
Piron, R.
2009-11-15
Calculations of the radiative properties of dense plasmas are usually based on the concept of an atom in a plasma. Such a concept is often used in average-atom models which constitute a good starting point for more sophisticated statistical approaches. Average-atom models are also directly useful in the calculation of the equation of state and of some transport coefficients. Since Feynman, Metropolis and Teller application of the Thomas-Fermi model to dense plasmas, all attempts to construct a quantum extension of the model have led to some thermodynamic inconsistencies. This work concerns a variational average-atom model of dense plasmas. Contrary to other models, this one gives access to the thermodynamic equilibrium and respects the Virial theorem. In order to resolve the model's equations, a numerical code called VAAQP (Variational Average-Atom in Quantum Plasmas) was written. In particular, it allows us to calculate the equation of state. After a description of other models, we outline the variational model formalism in the framework of the Thomas-Fermi theory, of the non-relativistic quantum mechanics, and of the relativistic quantum mechanics. It is then shown that the variational model fulfills the Virial theorem and the thermodynamic inconsistencies of the other models are explained. The numerical methods which constitute the basis of the VAAQP code are described. Applications of the variational model to equation of state computations are presented and compared to results from other models, such as INFERNO. Comparisons to experiments on the Hugoniot shock adiabats are also shown. (author)
Analysis of pedestal plasma transport
Energy Technology Data Exchange (ETDEWEB)
Callen, J. D. [University of Wisconsin, Madison; Groebner, R. [General Atomics, San Diego; Osborne, T.H. [General Atomics, San Diego; Canik, John [ORNL; Owen, Larry W [ORNL; Pankin, A. Y. [Lehigh University, Bethlehem, PA; Rafiq, T. [Lehigh University, Bethlehem, PA; Rognlien, T. D. [Lawrence Livermore National Laboratory (LLNL); Stacey, W. M. [Georgia Institute of Technology
2010-01-01
An H-mode edge pedestal plasma transport benchmarking exercise was undertaken for a single DIII-D pedestal. Transport modelling codes used include 1.5D interpretive (ONETWO, GTEDGE), 1.5D predictive (ASTRA) and 2D ones (SOLPS, UEDGE). The particular DIII-D discharge considered is 98889, which has a typical low density pedestal. Profiles for the edge plasma are obtained from Thomson and charge-exchange recombination data averaged over the last 20% of the average 33.53 ms repetition time between type I edge localized modes. The modelled density of recycled neutrals is largest in the divertor X-point region and causes the edge plasma source rate to vary by a factor similar to 10(2) on the separatrix. Modelled poloidal variations in the densities and temperatures on flux surfaces are small on all flux surfaces up to within about 2.6 mm (rho(N) > 0.99) of the mid-plane separatrix. For the assumed Fick's-diffusion-type laws, the radial heat and density fluxes vary poloidally by factors of 2-3 in the pedestal region; they are largest on the outboard mid-plane where flux surfaces are compressed and local radial gradients are largest. Convective heat flows are found to be small fractions of the electron (less than or similar to 10%) and ion (less than or similar to 25%) heat flows in this pedestal. Appropriately averaging the transport fluxes yields interpretive 1.5D effective diffusivities that are smallest near the mid-point of the pedestal. Their 'transport barrier' minima are about 0.3 (electron heat), 0.15 (ion heat) and 0.035 (density) m(2) s(-1). Electron heat transport is found to be best characterized by electron-temperature-gradient-induced transport at the pedestal top and paleoclassical transport throughout the pedestal. The effective ion heat diffusivity in the pedestal has a different profile from the neoclassical prediction and may be smaller than it. The very small effective density diffusivity may be the result of an inward pinch flow nearly
Quadrature formulas for Fourier coefficients
Bojanov, Borislav
2009-09-01
We consider quadrature formulas of high degree of precision for the computation of the Fourier coefficients in expansions of functions with respect to a system of orthogonal polynomials. In particular, we show the uniqueness of a multiple node formula for the Fourier-Tchebycheff coefficients given by Micchelli and Sharma and construct new Gaussian formulas for the Fourier coefficients of a function, based on the values of the function and its derivatives. © 2009 Elsevier B.V. All rights reserved.
Coefficient Alpha: A Reliability Coefficient for the 21st Century?
Yang, Yanyun; Green, Samuel B.
2011-01-01
Coefficient alpha is almost universally applied to assess reliability of scales in psychology. We argue that researchers should consider alternatives to coefficient alpha. Our preference is for structural equation modeling (SEM) estimates of reliability because they are informative and allow for an empirical evaluation of the assumptions…
Measuring of heat transfer coefficient
DEFF Research Database (Denmark)
Henningsen, Poul; Lindegren, Maria
Subtask 3.4 Measuring of heat transfer coefficient Subtask 3.4.1 Design and setting up of tests to measure heat transfer coefficient Objective: Complementary testing methods together with the relevant experimental equipment are to be designed by the two partners involved in order to measure...... the heat transfer coefficient for a wide range of interface conditions in hot and warm forging processes. Subtask 3.4.2 Measurement of heat transfer coefficient The objective of subtask 3.4.2 is to determine heat transfer values for different interface conditions reflecting those typically operating in hot...
Measuring of heat transfer coefficient
DEFF Research Database (Denmark)
Henningsen, Poul; Lindegren, Maria
Subtask 3.4 Measuring of heat transfer coefficient Subtask 3.4.1 Design and setting up of tests to measure heat transfer coefficient Objective: Complementary testing methods together with the relevant experimental equipment are to be designed by the two partners involved in order to measure...... the heat transfer coefficient for a wide range of interface conditions in hot and warm forging processes. Subtask 3.4.2 Measurement of heat transfer coefficient The objective of subtask 3.4.2 is to determine heat transfer values for different interface conditions reflecting those typically operating in hot...
Roughness coefficient and its uncertainty in gravel-bed river
Institute of Scientific and Technical Information of China (English)
Ji-Sung KIM; Chan-Joo LEE; Won KIM; Yong-Jeon KIM
2010-01-01
Manning's roughness coefficient was estimated for a gravel-bed river reach using field measurements of water level and discharge,and the applicability of various methods used for estimation of the roughness coefficient was evaluated.Results show that the roughness coefficient tends to decrease with increasing discharge and water depth,and over a certain range it appears to remain constant.Comparison of roughness coefficients calculated by field measurement data with those estimated by other methods shows that,although the field-measured values provide approximate roughness coefficients for relatively large discharge,there seems to be rather high uncertainty due to the difference in resultant values.For this reason,uncertainty related to the roughness coefficient was analyzed in terms of change in computed variables.On average,a 20%increase of the roughness coefficient causes a 7% increase in the water depth and an 8% decrease in velocity,but there may be about a 15% increase in the water depth and an equivalent decrease in velocity for certain cross-sections in the study reach.Finally,the validity of estimated roughness coefficient based on field measurements was examined.A 10% error in discharge measurement may lead to more than 10% uncertainty in roughness coefficient estimation,but corresponding uncertainty in computed water depth and velocity is reduced to approximately 5%.Conversely,the necessity for roughness coefficient estimation by field measurement is confirmed.
Thermal Conductivity Coefficient from Microscopic Models
Nemakhavhani, T E
2016-01-01
Thermal conductivity of hadron matter is studied using a microscopic transport model, which will be used to simulate ultra-relativistic heavy ion collisions at different energy densities, namely the Ultra-relativistic Quantum Molecular Dynamics (UrQMD). The molecular dynamics simulation is performed for a system of light mesons species (pion, rho, kaon) in a box with periodic boundary conditions. The equilibrium state is investigated by studying chemical equilibrium and thermal equilibrium of the system. Particle multiplicity equilibrates with time, and the energy spectra of different light mesons species have the same slopes and common temperatures when thermal equilibrium is reached. Thermal conductivity transport coefficient is calculated from the heat current - current correlations using the Green-Kubo relations.
Determining pitch-angle diffusion coefficients from test particle simulations
Ivascenko, A.; S. Lange; Spanier, F.; R. Vainio
2016-01-01
Transport and acceleration of charged particles in turbulent media is a topic of great interest in space physics and interstellar astrophysics. These processes are dominated by the scattering of particles off magnetic irregularities. The scattering process itself is usually described by small-angle scattering with the pitch-angle coefficient $D_{\\mu\\mu}$ playing a major role. Since the diffusion coefficient $D_{\\mu\\mu}$ can be determined analytically only for the approximation of quasi-linear...
Institute of Scientific and Technical Information of China (English)
蔡新景; 王新新; 邹晓兵; 鲁志伟
2016-01-01
The propagation properties of streamer could be obtained accurately by using the fluid model to simulate, provided that precise electron transport and reaction coefficients were input the model. Presently, there were two methods to calculate the transport coefficients: interpolation method based on the data of swarm experiment or two-term approximation of the Boltzmann equation. It was showed that interpolation method could be merely used in low reduced electric condition, and for the second method the reasonableness of the isotropic assumption and the accuracy of the results were a question. In view of the above problems, multi-term approximation of the Boltzmann equation to obtain electron transport coefficients was proposed by Nesset al. Here two improvements are provided: firstly, the expansion sequence is adjusted to derive the unified hierarchy in the hydrodynamic and non-hydrodynamic limit; secondly, the collision integral is evaluated based on the Gauss-Kronrod rule instead of Gauss-Laguerre rule as used in Ness''s works. In the end hard sphere model and Reid''s ramp inelastic model are considered. It is shown that it is more accurate to evaluate the collision integral based on Gauss-Kronrod integration method than Gauss-Laguerre method. Furthermore, it is demonstrated that the electron velocity distribution is anisotropic even only undergoing conservative collision, so there is a great error if the two -term approximation is used to obtain the electron transport coefficients.%获得准确的电子输运和反应系数是采用流体模型准确仿真流注传播特性的前提.目前,电子输运系数主要有两种计算方法:一是用电子群实验数据进行插值;二是用两项近似方法解玻尔兹曼方程.方法一只能用在约化场强很小的场合,方法二的理论基础即各相同性假设是否成立和数据准确度尚无定论.针对以上问题,Ness 等人采用了多项近似法解玻尔兹曼方程计算电子输运系数.该
An advection-diffusion model for cross-field runaway electron transport in perturbed magnetic fields
Särkimäki, Konsta; Decker, Joan; Varje, Jari; Kurki-Suonio, Taina
2016-01-01
Disruption-generated runaway electrons (RE) present an outstanding issue for ITER. The predictive computational studies of RE generation rely on orbit-averaged computations and, as such, they lack the effects from the magnetic field stochasticity. Since stochasiticity is naturally present in post-disruption plasma, and externally induced stochastization offers a prominent mechanism to mitigate RE avalanche, we present an advection-diffusion model that can be used to couple an orbit-following code to an orbit-averaged tool in order to capture the cross-field transport and to overcome the latter's limitation. The transport coefficients are evaluated via a Monte Carlo method. We show that the diffusion coefficient differs significantly from the well-known Rechester-Rosenbluth result. We also demonstrate the importance of including the advection: it has a two-fold role both in modelling transport barriers created by magnetic islands and in amplifying losses in regions where the islands are not present.
Peltier Coefficient and Photon-Assisted Tunnelling in Quantum Point Contact
H. Aly, Arafa
2008-12-01
We present the Peltier coefficient and thermal transport in quantum point contact (QPC), under the influence of external fields and different temperatures. Also we obtain the oscillations of the Peltier coefficient in external fields. Numerical calculations of the Peltier coefficient are performed at different applied voltages, amplitudes and temperatures. The obtained results are consistent with the experimental data in the literature.
Determining pitch-angle diffusion coefficients from test particle simulations
Ivascenko, A; Spanier, F; Vainio, R
2016-01-01
Transport and acceleration of charged particles in turbulent media is a topic of great interest in space physics and interstellar astrophysics. These processes are dominated by the scattering of particles off magnetic irregularities. The scattering process itself is usually described by small-angle scattering with the pitch-angle coefficient $D_{\\mu\\mu}$ playing a major role. Since the diffusion coefficient $D_{\\mu\\mu}$ can be determined analytically only for the approximation of quasi-linear theory, the determination of this coefficient from numerical simulations has, therefore, become more important. So far these simulations yield particle tracks for small-scale scattering, which can then be interpreted using the running diffusion coefficients. This method has a limited range of validity. This paper presents two new methods that allow for the calculation of the pitch-angle diffusion coefficient from numerical simulations. These methods no longer analyse particle trajectories, but the change of particle dist...
Electron transport through nuclear pasta in magnetized neutron stars
Yakovlev, D G
2015-01-01
We present a simple model for electron transport in a possible layer of exotic nuclear clusters (in the so called nuclear pasta layer) between the crust and liquid core of a strongly magnetized neutron star. The electron transport there can be strongly anisotropic and gyrotropic. The anisotropy is produced by different electron effective collision frequencies along and across local symmetry axis in domains of exotic ordered nuclear clusters and by complicated effects of the magnetic field. We also calculate averaged kinetic coefficients in case local domains are freely oriented. Possible applications of the obtained results and open problems are outlined.
Fractai Estimation of Joint Roughness Coefficients
Institute of Scientific and Technical Information of China (English)
谢和平; Willian G.Pariseau
1994-01-01
Based on the triadic Koch curve,a generalized fractal model of joint profiles is establishedto simulate joint roughness.The fractal dimension of a joint profile can be directly obtained from the two pa-rameters,L~* and h~*, the average base length and average height of asperities of the joint,respectively,i,e D=log4/log[2(1+cos tan~1(2h’/L’))]This fractal dimension is strongly correlated with the value of the joint roughness coefficient (JRC). An empirical relationship is found in the form,JRC=85.2671·(D-1)~0.5679 Thus, the fractal analysis proposed provides a new method of estimating JRC values
Spatial variation of the longitudinal dispersion coefficient in an estuary
D. C. Shaha; Y.-K. Cho; M.-T. Kwak; S. R. Kundu; K. T. Jung
2011-01-01
The effective longitudinal dispersion is a primary tool for determining property distributions in estuaries. Most previous studies have examined the longitudinal dispersion coefficient for the average tidal condition. However, information on spatial and temporal variations of this coefficient at low and high tide is scarce. Three years of hydrographic data taken at low and high tide along the main axis of the Sumjin River Estuary (SRE), Korea are used to estimate the spatial and temporal vari...
TRANSPORT OF BICOMPONENT CONTAMINANT IN FREE-SURFACE WETLAND FLOW
Institute of Scientific and Technical Information of China (English)
CHEN Bin; ZENG Li; WU Yi-hong; JI Ping; ZHAO Yi-jun
2012-01-01
This paper presents a theoretical analysis of a pulsed bicomponent contaminant emission into a free-surface wetland flow.The basic equations are for the bicomponent contaminant transport in the wetland flow under the combined action of advection,mass dispersion,and ecological reaction at the phase averaged scale.The effect of the ecological reaction is separated from the hydrodynamic effect via a set of widely used transforms.The analytical solution for the evolution of the depth-averaged concentration is rigorously derived,with a limiting case covering the known solution for the single component contaminant transport.It is found that the depth-averaged species concentration of the bicomponent contaminant can approach an equilibrium state determined by the distribution coefficient.
Isotope effects on particle transport in the Compact Helical System
Tanaka, K.; Okamura, S.; Minami, T.; Ida, K.; Mikkelsen, D. R.; Osakabe, M.; Yoshimura, Y.; Isobe, M.; Morita, S.; Matsuoka, K.
2016-05-01
The hydrogen isotope effects of particle transport were studied in the hydrogen and deuterium dominant plasmas of the Compact Helical System (CHS). Longer decay time of electron density after the turning-off of the gas puffing was observed in the deuterium dominant plasma suggesting that the recycling was higher and/or the particle confinement was better in the deuterium dominant plasma. Density modulation experiments showed the quantitative difference of the particle transport coefficients. Density was scanned from 0.8 × 1019 m-3 to 4 × 1019 m-3 under the same magnetic field and almost the same heating power. In the low density regime (line averaged density 2.5 × 1019 m-3) no clear difference was observed. This result indicates that the isotope effects of particle transport exist only in the low density regime. Comparison with neoclassical transport coefficients showed that the difference of particle transport is likely to be due to the difference of turbulence driven anomalous transport. Linear character of the ion scale turbulence was studied. The smaller linear growth rate qualitatively agreed with the reduced particle transport in the deuterium dominant plasma of the low density regime.
The Kauffman Constraint Coefficients Kw
Griggs, Kenneth A
2011-01-01
The Kauffman Constraint Coefficients Kw and their corresponding Elementals Ew are presented as solutions to the construction of the (beta)-derivative of Kauffman's Theta-function. Additionally, a new recursion relation is provided to construct the (beta)-derivative of Theta that requires only operational substitutions and summations; this algorithmically simplifies Kauffman's original technique. To demonstrate Kw, we generate the 30 Kw Coefficients from the corresponding Elementals Ew for the (9)-derivative of Theta and find that our results are in complete agreement with Kauffman's Mathematica\\texttrademark solutions. We further present a calculation of two coefficients for the (12)-derivative of Theta and invite readers to use Mathematica\\texttrademark or any other means to calculate and verify our results. Finally, we present a challenging calculation for a coefficient of the (40)-derivative of Theta; owing to the vast numbers of permutations involved, a Mathematica\\texttrademark approach may require subst...
Kappa Coefficients for Circular Classifications
Warrens, Matthijs J.; Pratiwi, Bunga C.
2016-01-01
Circular classifications are classification scales with categories that exhibit a certain periodicity. Since linear scales have endpoints, the standard weighted kappas used for linear scales are not appropriate for analyzing agreement between two circular classifications. A family of kappa coefficie
Properties of Traffic Risk Coefficient
Institute of Scientific and Technical Information of China (English)
TANG Tie-Qiao; HUANG Hai-Jun; SHANG Hua-Yan; XUE Yu
2009-01-01
We use the model with the consideration of the traffic interruption probability (Physica A 387(2008)6845) to study the relationship between the traffic risk coefficient and the traffic interruption probability.The analytical and numerical results show that the traffic interruption probability will reduce the traffic risk coefficient and that the reduction is related to the density, which shows that this model can improve traffic security.
Wrong Signs in Regression Coefficients
McGee, Holly
1999-01-01
When using parametric cost estimation, it is important to note the possibility of the regression coefficients having the wrong sign. A wrong sign is defined as a sign on the regression coefficient opposite to the researcher's intuition and experience. Some possible causes for the wrong sign discussed in this paper are a small range of x's, leverage points, missing variables, multicollinearity, and computational error. Additionally, techniques for determining the cause of the wrong sign are given.
Estimating biokinetic coefficients in the PACT™ system.
Shen, Zhiyao; Arbuckle, Wm Brian
2016-02-01
When powdered activated carbon (PAC) is continuously added to the aeration tank of an activated sludge reactor, the modification is called a PACT™ process (for powdered activated carbon treatment). The PAC provides many benefits, but complicates the determination of biological phenomena. Determination of bio-oxidation kinetics in a PACT system is a key to fully understanding enhanced biological mechanisms resulting from PAC addition. A model is developed to account for the main mechanisms involved in the PACT system -- adsorption, air stripping and bio-oxidation. The model enables the investigation of biokinetic information, including possible synergistic effects. Six parallel reactors were used to treat a synthetic waste; three activated sludge and three PACT. The PACT reactors provided significantly reduced effluent TOC (total organic carbon). Biokinetic coefficients were obtained from steady-state data using averaged reactor data and by using all data (22 points for each reactor). As expected, the PACT reactors resulted in a substantial reduction in the effluent concentration of non-biodegradable total organic carbon. The Monod equation's half-saturation coefficient (Ks) was reduced significantly in the PACT reactors, resulting in higher growth rates at lower concentrations. The maximum specific substrate utilization (qm) rate was also reduced about 25% using the averaged data and remained unchanged using all the data. The substrate utilization values are affected by errors in biomass determination and more research is needed to accurately determine biomass.
Yan, Liuming; Shao, Changle; Ji, Xiaobo
2009-07-15
The electroosmotic drag coefficient of water molecules in hydrated sodium perfluorosulfonate electrolyte polymer is evaluated on the basis of the velocity distribution functions of the sodium cations and water molecules with an electric field applied using molecular dynamics simulations. The simulation results indicate that both velocity distribution functions of water molecules and of sodium cations agree well with the classic Maxwellian velocity distribution functions when there is no electric field applied. If an electric field is applied, the distribution functions of velocity component in directions perpendicular to the applied electric field still agree with the Maxwellian velocity distribution functions but with different temperature parameters. In the direction of the applied electric field, the electric drag causes the velocity distribution function to deviate from the Maxwellian velocity distribution function; however, to obey the peak shifted Maxwellian distribution function. The peak shifting velocities coincide with the average transport velocities induced by the electric field, and could be applied to the evaluation of the electroosmotic drag coefficient of water. By evaluation of the transport velocities of water molecules in the first coordination shells of sodium cations, sulfonate anion groups, and in the bulk, it is clearly shown that the water molecules in the first coordination shell of sodium cations are the major contribution to the electroosmotic drag and momentum transfer from water molecules within the first coordination shell to the other water molecules also contributes to the electroosmotic drag.
2010-01-01
... 7 Agriculture 10 2010-01-01 2010-01-01 false On average. 1209.12 Section 1209.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS....12 On average. On average means a rolling average of production or imports during the last two...
Directory of Open Access Journals (Sweden)
Qinghua Liu
2014-12-01
Full Text Available Traffic congestion is a growing problem in urban areas all over the world. The transport sector has been in full swing event study on intelligent transportation system for automatic detection. The functionality of automatic incident detection on expressways is a primary objective of advanced traffic management system. In order to save lives and prevent secondary incidents, accurate and prompt incident detection is necessary. This paper presents a methodology that integrates moving average (MA model with stationary wavelet decomposition for automatic incident detection, in which parameters of layer coefficient are extracted from the difference between the upstream and downstream occupancy. Unlike other wavelet-based method presented before, firstly it smooths the raw data with MA model. Then it uses stationary wavelet to decompose, which can achieve accurate reconstruction of the signal, and does not shift the signal transfer coefficients. Thus, it can detect the incidents more accurately. The threshold to trigger incident alarm is also adjusted according to normal traffic condition with congestion. The methodology is validated with real data from Tokyo Expressway ultrasonic sensors. Experimental results show that it is accurate and effective, and that it can differentiate traffic accident from other condition such as recurring traffic congestion.
New variational bounds on convective transport. I. Formulation and analysis
Tobasco, Ian; Souza, Andre N.; Doering, Charles R.
2016-11-01
We study the maximal rate of scalar transport between parallel walls separated by distance h, by an incompressible fluid with scalar diffusion coefficient κ. Given velocity vector field u with intensity measured by the Péclet number Pe =h2 1/2 / κ (where is space-time average) the challenge is to determine the largest enhancement of wall-to-wall scalar flux over purely diffusive transport, i.e., the Nusselt number Nu . Variational formulations of the problem are presented and it is determined that Nu ∞ . Moreover, this scaling for optimal transport-possibly modulo logarithmic corrections-is asymptotically sharp: admissible steady flows with Nu >=c' Pe 2 / 3 /[ log Pe ] 2 are constructed. The structure of (nearly) maximally transporting flow fields is discussed. Supported in part by National Science Foundation Graduate Research Fellowship DGE-0813964, awards OISE-0967140, PHY-1205219, DMS-1311833, and DMS-1515161, and the John Simon Guggenheim Memorial Foundation.
EFFICIENT ESTIMATION OF FUNCTIONAL-COEFFICIENT REGRESSION MODELS WITH DIFFERENT SMOOTHING VARIABLES
Institute of Scientific and Technical Information of China (English)
Zhang Riquan; Li Guoying
2008-01-01
In this article, a procedure for estimating the coefficient functions on the functional-coefficient regression models with different smoothing variables in different co-efficient functions is defined. First step, by the local linear technique and the averaged method, the initial estimates of the coefficient functions are given. Second step, based on the initial estimates, the efficient estimates of the coefficient functions are proposed by a one-step back-fitting procedure. The efficient estimators share the same asymptotic normalities as the local linear estimators for the functional-coefficient models with a single smoothing variable in different functions. Two simulated examples show that the procedure is effective.
Redox Couples with Unequal Diffusion Coefficients: Effect on Redox Cycling
Mampallil Augustine, Dileep; Mathwig, Klaus; Kang, Shuo; Lemay, Serge G.
2013-01-01
Redox cycling between two electrodes separated by a narrow gap allows dramatic amplification of the faradaic current. Unlike conventional electrochemistry at a single electrode, however, the mass-transport-limited current is controlled by the diffusion coefficient of both the reduced and oxidized fo
Sediment transport capacity of hyperconcentrated flow
Institute of Scientific and Technical Information of China (English)
2008-01-01
As one of the most important components of river mechanics,sediment transport capacity of sediment-laden flows has attracted much attention from many researchers working on river mechanics and hydraulic engineering. Based on the time-averaged equation for a turbulent energy equilibrium in solid and liquid two-phase flow,an expression for the efficiency coefficient of suspended load movement was derived for the two-dimensional,steady,uniform,fully-developed turbulent flow. A new structural expression of sediment transport capacity was achieved. Using 115 runs of flume experimental data,which were obtained through two kinds of sediment transport experiments in the state of equilibrium,in combination with the basic rheological and sediment transporting characteristics of hyperconcentrated flow,the main parameters in the structural expression of sediment transport capacity were calibrated,and a new formula of sediment transport capacity for hyperconcentrated flow was developed. A large amount of field data from the Yellow River,Wuding River,and Yangtze River,etc. were adopted to verify the new formula and good agreement was obtained. These results above contribute to an improved theoretical system of river mechanics and a reliable tool for management of rivers carrying high concentration of sediments.
Sediment transport capacity of hyperconcentrated flow
Institute of Scientific and Technical Information of China (English)
SHU AnPing; FEI XiangJun
2008-01-01
As one of the most important components of river mechanics, sediment transport capacity of sediment-laden flows has attracted much attention from many re-searchers working on river mechanics and hydraulic engineering. Based on the time-averaged equation for a turbulent energy equilibrium in solid and liquid two-phase flow, an expression for the efficiency coefficient of suspended load movement was derived for the two-dimensional, steady, uniform, fully-developed turbulent flow. A new structural expression of sediment transport capacity was achieved. Using 115 runs of flume experimental data, which were obtained through two kinds of sediment transport experiments in the state of equilibrium, in combi-nation with the basic rheological and sediment transporting characteristics of hy-perconcentrated flow, the main parameters in the structural expression of sediment transport capacity were calibrated, and a new formula of sediment transport ca-pacity for hyperconcentrated flow was developed. A large amount of field data from the Yellow River, Wuding River, and Yangtze River, etc. were adopted to verify the new formula and good agreement was obtained. These results above contribute to an improved theoretical system of river mechanics and a reliable tool for man-agement of rivers carrying high concentration of sediments.
Transport coefficients of black MQGP M3-branes
Energy Technology Data Exchange (ETDEWEB)
Dhuria, Mansi [Physical Research Laboratory, Theoretical Physics Division, Ahmedabad (India); Misra, Aalok [Indian Institute of Technology, Department of Physics, Roorkee, Uttaranchal (India)
2015-01-01
The Strominger-Yau-Zaslow (SYZ) mirror, in the 'delocalised limit' of Becker et al. (Nucl Phys B 702:207, 2004), of N D3-branes, M fractional D3-branes and N{sub f} flavour D7-branes wrapping a non-compact four-cycle in the presence of a black hole (BH) resulting in a non-Kahler resolved warped deformed conifold (NKRWDC) in Mia et al. (Nucl Phys B 839:187, 2010), was carried out in Dhuria and Misra (JHEP 1311:001, 2013) and resulted in black M3- branes. There are two parts in our paper. In the first we show that in the 'MQGP' limit discussed in Dhuria and Misra (JHEP 1311:001, 2013) a finite g{sub s} (and hence expected to be more relevant to QGP), finite g{sub s}M, N{sub f}, g{sub s}{sup 2}MN{sub f} and very large g{sub s}N, and very small (g,M{sup 2})/(N), we have the following. (i) The uplift, if valid globally (like Dasgupta et al., Nucl Phys B 755:21, 2006) for fractional D3 branes in conifolds, asymptotically goes to M5-branes wrapping a two-cycle (homologously a (large) integer sum of two-spheres) in AdS{sub 5} x M{sub 6}. (ii) Assuming the deformation parameter to be larger than the resolution parameter, by estimating the five SU(3) structure torsion (τ) classes W{sub 1,2,3,4,5} we verify that τ element of W{sub 5} in the large-r limit, implying the NKRWDC reduces to a warped Kahler deformed conifold. (iii) The local T{sup 3} of Dhuria and Misra (JHEP 1311:001, 2013) in the large-r limit satisfies the same conditions as the maximal T{sup 2}-invariant special Lagrangian three-cycle of T*S{sup 3} of Ionel and Min-OO (J Math 52(3), 2008), partly justifying use of SYZ-mirror symmetry in the ''delocalised limit'' of Becker et al. (Nucl Phys B 702:207, 2004) in Dhuria and Misra (JHEP 1311:001, 2013). In the second part of the paper, by either integrating out the angular coordinates of the non-compact four-cycle which a D7-brane wraps around, using the Ouyang embedding, in the DBI action of a D7-brane evaluated at infinite radial boundary, or by dimensionally reducing the 11-dimensional EH action to five (R{sup 1,3}, r) dimensions and at the infinite radial boundary, we then calculate in particular the g{sub s}
Collisions, magnetization, and transport coefficients in the lower solar atmosphere
Vranjes, J
2013-01-01
The lower solar atmosphere is an intrinsically multi-component and collisional environment with electron and proton collision frequencies in the range $10^{8}-10^{10}$ Hz, which may be considerably higher than the gyro-frequencies for both species. We aim to provide a reliable quantitative set of data for collision frequencies, magnetization, viscosity, and thermal conductivity for the most important species in the lower solar atmosphere. Having such data at hand is essential for any modeling that is aimed at describing realistic properties of the considered environment. We describe the altitude dependence of the parameters and the different physics of collisions between charged species, and between charged and neutrals species. Regions of dominance of each type of collisions are clearly identified. We determine the layers within which either electrons or ions or both are unmagnetized. Protons are shown to be un-magnetized in the lower atmosphere in a layer that is at least 1000 km thick even for a kilo-Gauss...
Convection in axially symmetric accretion discs with microscopic transport coefficients
Malanchev, K L; Shakura, N I
2016-01-01
The vertical structure of stationary thin accretion discs is calculated from the energy balance equation with heat generation due to microscopic ion viscosity {\\eta} and electron heat conductivity {\\kappa}, both depending on temperature. In the optically thin discs it is found that for the heat conductivity increasing with temperature, the vertical temperature gradient exceeds the adiabatic value at some height, suggesting convective instability in the upper disc layer. There is a critical Prandtl number, Pr = 4/9, above which a Keplerian disc become fully convective. The vertical density distribution of optically thin laminar accretion discs as found from the hydrostatic equilibrium equation cannot be generally described by a polytrope but in the case of constant viscosity and heat conductivity. In the optically thick discs with radiation heat transfer, the vertical disc structure is found to be convectively stable for both absorption dominated and scattering dominated opacities, unless a very steep dependen...
Transport coefficients in Yang-Mills theory and QCD
Energy Technology Data Exchange (ETDEWEB)
Strodthoff, Nils; Christiansen, Nicolai; Haas, Michael [Institut fuer Theoretische Physik, Heidelberg (Germany); Pawlowski, Jan M. [Institut fuer Theoretische Physik, Heidelberg (Germany); ExtreMe Matter Institute EMMI, Darmstadt (Germany)
2015-07-01
We calculate the shear viscosity over entropy density ratio η/s in Yang-Mills theory from the Kubo formula using an exact diagrammatic representation in terms of full propagators and vertices using gluon spectral functions as external input. We provide an analytic fit formula for the temperature dependence of η/s over the whole temperature range from a glueball resonance gas at low temperatures, to a high-temperature regime consistent with perturbative results. Subsequently we provide a first estimate for η/s in QCD.
Harmonic functions with varying coefficients
Directory of Open Access Journals (Sweden)
Jacek Dziok
2016-05-01
Full Text Available Abstract Complex-valued harmonic functions that are univalent and sense preserving in the open unit disk can be written in the form f = h + g ‾ $f=h+\\overline{g}$ , where h and g are analytic. In this paper we investigate some classes of univalent harmonic functions with varying coefficients related to Janowski functions. By using the extreme points theory we obtain necessary and sufficient convolution conditions, coefficients estimates, distortion theorems, and integral mean inequalities for these classes of functions. The radii of starlikeness and convexity for these classes are also determined.
Directory of Open Access Journals (Sweden)
Gülfen TUNA
2013-03-01
Full Text Available The aim of this study is to test the validity of Downside Capital Asset Pricing Model (D-CAPM on the ISE. At the same time, the explanatory power of CAPM's traditional beta and D-CAPM's downside beta on the changes in the average return values are examined comparatively. In this context, the monthly data for seventy three stocks that are continuously traded on the ISE for the period 1991-2009 is used. Regression analysis is applied in this study. The research results have shown that D-CAPM is valid on the ISE. In addition, it is obtained that the power of downside beta coefficient is higher than traditional beta coefficient on explaining the return changes. Therefore, it can be said that the downside beta is superior to traditional beta in the ISE for chosen period.
19 CFR 141.112 - Liens for freight, charges, or contribution in general average.
2010-04-01
... general average. 141.112 Section 141.112 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF....112 Liens for freight, charges, or contribution in general average. (a) Definitions. The following are... connected with the transportation of the goods. (3) General average. “General average” means the...
49 CFR 525.11 - Termination of exemption; amendment of alternative average fuel economy standard.
2010-10-01
... average fuel economy standard. 525.11 Section 525.11 Transportation Other Regulations Relating to... EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS § 525.11 Termination of exemption; amendment of alternative average fuel economy standard. (a) Any exemption granted under this part for an affected model year...
Evaluation of complex heat transfer coefficients for passive heating concepts
Energy Technology Data Exchange (ETDEWEB)
Bansal, N.K.; Sodha, M.S.; Singh, S.P.; Ram, S.
1987-01-01
Passive heating concepts namely Trombe wall, Water wall and Trans wall have been analysed to obtain overall heat transfer coefficients for average values and for time-dependent variations. The numerical values have been obtained and tabulated for various wall thicknesses.
Organ and effective dose coefficients for cranial and caudal irradiation geometries: photons.
Veinot, K G; Eckerman, K F; Hertel, N E
2016-02-01
With the introduction of new recommendations of the International Commission on Radiological Protection (ICRP) in Publication 103, the methodology for determining the protection quantity, effective dose, has been modified. The modifications include changes to the defined organs and tissues, the associated tissue weighting factors, radiation weighting factors and the introduction of reference sex-specific computational phantoms. Computations of equivalent doses in organs and tissues are now performed in both the male and female phantoms and the sex-averaged values used to determine the effective dose. Dose coefficients based on the ICRP 103 recommendations were reported in ICRP Publication 116, the revision of ICRP Publication 74 and ICRU Publication 57. The coefficients were determined for the following irradiation geometries: anterior-posterior (AP), posterior-anterior (PA), right and left lateral (RLAT and LLAT), rotational (ROT) and isotropic (ISO). In this work, the methodology of ICRP Publication 116 was used to compute dose coefficients for photon irradiation of the body with parallel beams directed upward from below the feet (caudal) and directed downward from above the head (cranial). These geometries may be encountered in the workplace from personnel standing on contaminated surfaces or volumes and from overhead sources. Calculations of organ and tissue kerma and absorbed doses for caudal and cranial exposures to photons ranging in energy from 10 keV to 10 GeV have been performed using the MCNP6.1 radiation transport code and the adult reference phantoms of ICRP Publication 110. As with calculations reported in ICRP 116, the effects of charged-particle transport are evident when compared with values obtained by using the kerma approximation. At lower energies the effective dose per particle fluence for cranial and caudal exposures is less than AP orientations while above ∼30 MeV the cranial and caudal values are greater.
Level sets of multiple ergodic averages
Ai-Hua, Fan; Ma, Ji-Hua
2011-01-01
We propose to study multiple ergodic averages from multifractal analysis point of view. In some special cases in the symbolic dynamics, Hausdorff dimensions of the level sets of multiple ergodic average limit are determined by using Riesz products.
Effective Viscosity Coefficient of Nanosuspensions
Rudyak, V. Ya.; Belkin, A. A.; Egorov, V. V.
2008-12-01
Systematic calculations of the effective viscosity coefficient of nanosuspensions have been performed using the molecular dynamics method. It is established that the viscosity of a nanosuspension depends not only on the volume concentration of the nanoparticles but also on their mass and diameter. Differences from Einstein's relation are found even for nanosuspensions with a low particle concentration.
Irrational "Coefficients" in Renaissance Algebra.
Oaks, Jeffrey A
2017-06-01
Argument From the time of al-Khwārizmī in the ninth century to the beginning of the sixteenth century algebraists did not allow irrational numbers to serve as coefficients. To multiply by x, for instance, the result was expressed as the rhetorical equivalent of . The reason for this practice has to do with the premodern concept of a monomial. The coefficient, or "number," of a term was thought of as how many of that term are present, and not as the scalar multiple that we work with today. Then, in sixteenth-century Europe, a few algebraists began to allow for irrational coefficients in their notation. Christoff Rudolff (1525) was the first to admit them in special cases, and subsequently they appear more liberally in Cardano (1539), Scheubel (1550), Bombelli (1572), and others, though most algebraists continued to ban them. We survey this development by examining the texts that show irrational coefficients and those that argue against them. We show that the debate took place entirely in the conceptual context of premodern, "cossic" algebra, and persisted in the sixteenth century independent of the development of the new algebra of Viète, Decartes, and Fermat. This was a formal innovation violating prevailing concepts that we propose could only be introduced because of the growing autonomy of notation from rhetorical text.
Long Strange Segments, Ruin Probabilities and the Effect of Memory on Moving Average Processes
Ghosh, Souvik
2010-01-01
We obtain the rate of growth of long strange segments and the rate of decay of infinite horizon ruin probabilities for a class of infinite moving average processes with exponentially light tails. The rates are computed explicitly. We show that the rates are very similar to those of an i.i.d. process as long as moving average coefficients decay fast enough. If they do not, then the rates are significantly different. This demonstrates the change in the length of memory in a moving average process associated with certain changes in the rate of decay of the coefficients.
Accurate Switched-Voltage voltage averaging circuit
金光, 一幸; 松本, 寛樹
2006-01-01
Abstract ###This paper proposes an accurate Switched-Voltage (SV) voltage averaging circuit. It is presented ###to compensated for NMOS missmatch error at MOS differential type voltage averaging circuit. ###The proposed circuit consists of a voltage averaging and a SV sample/hold (S/H) circuit. It can ###operate using nonoverlapping three phase clocks. Performance of this circuit is verified by PSpice ###simulations.
Spectral averaging techniques for Jacobi matrices
del Rio, Rafael; Schulz-Baldes, Hermann
2008-01-01
Spectral averaging techniques for one-dimensional discrete Schroedinger operators are revisited and extended. In particular, simultaneous averaging over several parameters is discussed. Special focus is put on proving lower bounds on the density of the averaged spectral measures. These Wegner type estimates are used to analyze stability properties for the spectral types of Jacobi matrices under local perturbations.
[Electroencephalogram Feature Selection Based on Correlation Coefficient Analysis].
Zhou, Jinzhi; Tang, Xiaofang
2015-08-01
In order to improve the accuracy of classification with small amount of motor imagery training data on the development of brain-computer interface (BCD systems, we proposed an analyzing method to automatically select the characteristic parameters based on correlation coefficient analysis. Throughout the five sample data of dataset IV a from 2005 BCI Competition, we utilized short-time Fourier transform (STFT) and correlation coefficient calculation to reduce the number of primitive electroencephalogram dimension, then introduced feature extraction based on common spatial pattern (CSP) and classified by linear discriminant analysis (LDA). Simulation results showed that the average rate of classification accuracy could be improved by using correlation coefficient feature selection method than those without using this algorithm. Comparing with support vector machine (SVM) optimization features algorithm, the correlation coefficient analysis can lead better selection parameters to improve the accuracy of classification.
Distribution of population averaged observables in stochastic gene expression
Bhattacharyya, Bhaswati; Kalay, Ziya
2014-03-01
Observation of phenotypic diversity in a population of genetically identical cells is often linked to the stochastic nature of chemical reactions involved in gene regulatory networks. We investigate the distribution of population averaged gene expression levels as a function of population, or sample size for several stochastic gene expression models to find out to what extent population averaged quantities reflect the underlying mechanism of gene expression. We consider three basic gene regulation networks corresponding to transcription with and without gene state switching and translation. Using analytical expressions for the probability generating function (pgf) of observables and Large Deviation Theory, we calculate the distribution of population averaged mRNA and protein levels as a function of model parameters and population size. We validate our results using stochastic simulations also report exact results on the asymptotic properties of population averages which show qualitative differences for different models. We calculate the skewness and coefficient of variance for pgfs to estimate the sample size required for population average that contains information about gene expression models. This is relevant to experiments where a large number of data points are unavailable.
Average-Time Games on Timed Automata
Jurdzinski, Marcin; Trivedi, Ashutosh
2009-01-01
An average-time game is played on the infinite graph of configurations of a finite timed automaton. The two players, Min and Max, construct an infinite run of the automaton by taking turns to perform a timed transition. Player Min wants to minimise the average time per transition and player Max wants to maximise it. A solution of average-time games is presented using a reduction to average-price game on a finite graph. A direct consequence is an elementary proof of determinacy for average-tim...
Alves, M C; Santos, W S; Lee, C; Bolch, W E; Hunt, J G; Júnior, A B Carvalho
2016-09-24
The aim of this study was the calculation of conversion coefficients for absorbed doses per fluence (DT/Φ) using the sitting and standing male hybrid phantom (UFH/NCI) exposure to monoenergetic protons with energy ranging from 2 MeV to 10 GeV. Sex-averaged effective dose per fluence (E/Φ) using the results of DT/Φ for the male and female hybrid phantom in standing and sitting postures were also calculated. Results of E/Φ of UFH/NCI standing phantom were also compared with tabulated effective dose conversion coefficients provided in ICRP publication 116. To develop an exposure scenario implementing the male UFH/NCI phantom in sitting and standing postures was used the radiation transport code MCNPX. Whole-body irradiations were performed using the recommended irradiation geometries by ICRP publication 116 antero-posterior (AP), postero-anterior (PA), right and left lateral, rotational (ROT) and isotropic (ISO). In most organs, the conversion coefficients DT/Φ were similar for both postures. However, relative differences were significant for organs located in the lower abdominal region, such as prostate, testes and urinary bladder, especially in the AP geometry. Results of effective dose conversion coefficients were 18% higher in the standing posture of the UFH/NCI phantom, especially below 100 MeV in AP and PA. In lateral geometry, the conversion coefficients values below 20 MeV were 16% higher in the sitting posture. In ROT geometry, the differences were below 10%, for almost all energies. In ISO geometry, the differences in E/Φ were negligible. The results of E/Φ of UFH/NCI phantom were in general below the results of the conversion coefficients provided in ICRP publication 116.
Study of Dispersion Coefficient Channel
Akiyama, K. R.; Bressan, C. K.; Pires, M. S. G.; Canno, L. M.; Ribeiro, L. C. L. J.
2016-08-01
The issue of water pollution has worsened in recent times due to releases, intentional or not, of pollutants in natural water bodies. This causes several studies about the distribution of pollutants are carried out. The water quality models have been developed and widely used today as a preventative tool, ie to try to predict what will be the concentration distribution of constituent along a body of water in spatial and temporal scale. To understand and use such models, it is necessary to know some concepts of hydraulic high on their application, including the longitudinal dispersion coefficient. This study aims to conduct a theoretical and experimental study of the channel dispersion coefficient, yielding more information about their direct determination in the literature.
Clustering Coefficients in Multiplex Networks
Cozzo, Emanuele; De Domenico, Manlio; Solé, Albert; Arenas, Alex; Gómez, Sergio; Porter, Mason A; Moreno, Yamir
2013-01-01
Recent advances in the study of complex networked systems has highlighted that our interconnected world is made of networks that are coupled together through different layers that each stand for one type of interaction or system. Despite this situation, it is traditional to aggregate multiplex data into a single weighted network in order take advantage of existing tools. This is admittedly convenient, but it is also extremely problematic. In this paper, we generalize the concept of clustering coefficients for multiplex networks. We show how the layered structure of multiplex networks introduces a new degree of freedom that has a fundamental effect on transitivity. We compute our new multiplex clustering coefficients for several real multiplex networks and illustrate why generalizing monoplex concepts to multiplex networks must be done with great care.
SEASONAL AVERAGE FLOW IN RÂUL NEGRU HYDROGRAPHIC BASIN
Directory of Open Access Journals (Sweden)
VIGH MELINDA
2015-03-01
Full Text Available The Râul Negru hydrographic basin is a well individualised physical-geographical unit inside the Braşov Depression. The flow is controlled by six hydrometric stations placed on the main river and on two important tributaries. The data base for seasonal flow analysis contains the discharges from 1950-2012. The results of data analysis show that there significant space-time differences between multiannual seasonal averages. Some interesting conclusions can be obtained by comparing abundant and scarce periods. Flow analysis was made using seasonal charts Q = f(T. The similarities come from the basin’s relative homogeneity, and the differences from flow’s evolution and trend. Flow variation is analysed using variation coefficient. In some cases appear significant Cv values differences. Also, Cv values trends are analysed according to basins’ average altitude.
Attenuation coefficients for water quality trading.
Keller, Arturo A; Chen, Xiaoli; Fox, Jessica; Fulda, Matt; Dorsey, Rebecca; Seapy, Briana; Glenday, Julia; Bray, Erin
2014-06-17
Water quality trading has been proposed as a cost-effective approach for reducing nutrient loads through credit generation from agricultural or point source reductions sold to buyers facing costly options. We present a systematic approach to determine attenuation coefficients and their uncertainty. Using a process-based model, we determine attenuation with safety margins at many watersheds for total nitrogen (TN) and total phosphorus (TP) loads as they transport from point of load reduction to the credit buyer. TN and TP in-stream attenuation generally increases with decreasing mean river flow; smaller rivers in the modeled region of the Ohio River Basin had TN attenuation factors per km, including safety margins, of 0.19-1.6%, medium rivers of 0.14-1.2%, large rivers of 0.13-1.1%, and very large rivers of 0.04-0.42%. Attenuation in ditches transporting nutrients from farms to receiving rivers is 0.4%/km for TN, while for TP attenuation in ditches can be up to 2%/km. A 95 percentile safety margin of 30-40% for TN and 6-10% for TP, applied to the attenuation per km factors, was determined from the in-stream sensitivity of load reductions to watershed model parameters. For perspective, over 50 km a 1% per km factor would result in 50% attenuation = 2:1 trading ratio.
DEFF Research Database (Denmark)
Jeong, Cheol-Ho; Chang, Ji-ho
2015-01-01
Absorption coefficients measured in reverberation chambers, Sabine absorption coefficients, suffer from two major problems. Firstly, they sometimes exceed unity. Secondly, the reproducibility of the Sabine absorption coefficients is quite poor, meaning that the Sabine absorption coefficients vary...
Institute of Scientific and Technical Information of China (English)
LU Yigang; PENG Jianxin; TONG Jie; DONG Yanwu
2000-01-01
On the basis of Jacobson's free length theory and the theory of pressure coefficient and temperature coefficient of free length in liquids, the relationship between the pressure coefficient of ultrasonic velocity and the pressure coefficient of free length, and the relationship between the temperature coefficient of ultrasonic velocity and the temperature coefficient of free length were studied. Relevant equations were given, and the pressure coefficient and temperature coefficient of ultrasonic velocity were calculated, which are in agreement with the measured values.
Accounting for scattering in the Landauer-Datta-Lundstrom transport model
Directory of Open Access Journals (Sweden)
Юрій Олексійович Кругляк
2015-03-01
Full Text Available Scattering of carriers in the LDL transport model during the changes of the scattering times in the collision processes is considered qualitatively. The basic relationship between the transmission coefficient T and the average mean free path is derived for 1D conductor. As an example, the experimental data for Si MOSFET are analyzed with the use of various models of reliability.
WIDTHS AND AVERAGE WIDTHS OF SOBOLEV CLASSES
Institute of Scientific and Technical Information of China (English)
刘永平; 许贵桥
2003-01-01
This paper concerns the problem of the Kolmogorov n-width, the linear n-width, the Gel'fand n-width and the Bernstein n-width of Sobolev classes of the periodicmultivariate functions in the space Lp(Td) and the average Bernstein σ-width, averageKolmogorov σ-widths, the average linear σ-widths of Sobolev classes of the multivariatequantities.
Stochastic averaging of quasi-Hamiltonian systems
Institute of Scientific and Technical Information of China (English)
朱位秋
1996-01-01
A stochastic averaging method is proposed for quasi-Hamiltonian systems (Hamiltonian systems with light dampings subject to weakly stochastic excitations). Various versions of the method, depending on whether the associated Hamiltonian systems are integrable or nonintegrable, resonant or nonresonant, are discussed. It is pointed out that the standard stochastic averaging method and the stochastic averaging method of energy envelope are special cases of the stochastic averaging method of quasi-Hamiltonian systems and that the results obtained by this method for several examples prove its effectiveness.
NOAA Average Annual Salinity (3-Zone)
California Department of Resources — The 3-Zone Average Annual Salinity Digital Geography is a digital spatial framework developed using geographic information system (GIS) technology. These salinity...
Comparison of the Seltzer Coefficient C 1 to Experimental Data
Angeli, I.
2001-03-01
Experimental Coulomb isotope shifts δ E Coul from K α transitions, and radius differences δ eμ measured by electron scattering and muonic atom X-rays were used to derive ‘experimental’ coefficients C 1,exp for 54 isotope pairs of 18 elements from Mo to U. A χ2-analysis shows that these experimental coefficients are - on average - 3.5% lower than the theoretical C 1 values calculated by Seltzer, or more precisely: C 1,exp=0.965(± 0.014)× C 1. The need for more accurate theoretical calculations is stressed, and consequences of this deviation are discussed.
Dynamic Multiscale Averaging (DMA) of Turbulent Flow
Energy Technology Data Exchange (ETDEWEB)
Richard W. Johnson
2012-09-01
A new approach called dynamic multiscale averaging (DMA) for computing the effects of turbulent flow is described. The new method encompasses multiple applications of temporal and spatial averaging, that is, multiscale operations. Initially, a direct numerical simulation (DNS) is performed for a relatively short time; it is envisioned that this short time should be long enough to capture several fluctuating time periods of the smallest scales. The flow field variables are subject to running time averaging during the DNS. After the relatively short time, the time-averaged variables are volume averaged onto a coarser grid. Both time and volume averaging of the describing equations generate correlations in the averaged equations. These correlations are computed from the flow field and added as source terms to the computation on the next coarser mesh. They represent coupling between the two adjacent scales. Since they are computed directly from first principles, there is no modeling involved. However, there is approximation involved in the coupling correlations as the flow field has been computed for only a relatively short time. After the time and spatial averaging operations are applied at a given stage, new computations are performed on the next coarser mesh using a larger time step. The process continues until the coarsest scale needed is reached. New correlations are created for each averaging procedure. The number of averaging operations needed is expected to be problem dependent. The new DMA approach is applied to a relatively low Reynolds number flow in a square duct segment. Time-averaged stream-wise velocity and vorticity contours from the DMA approach appear to be very similar to a full DNS for a similar flow reported in the literature. Expected symmetry for the final results is produced for the DMA method. The results obtained indicate that DMA holds significant potential in being able to accurately compute turbulent flow without modeling for practical
Impact of Soil Water Flux on Vadose Zone Solute Transport Parameters
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
The transport processes of solutes in two soil columns filled with undisturbed soil material collected from an unsaturated sandy aquifer formation in Belgium subjected to a variable upper boundary condition were identified from breakthrough curves measured by means of time domain refiectometry (TDR). Solute breakthrough was measured with 3 TDR probes inserted into each soil column at three different depths at a 10 minutes time interval. In addition, soil water content and pressure head were measured at 3 different depths. Analytical solute transport models were used to estimate the solute dispersion coefficient and average pore-water velocity from the observed breakthrough curves. The results showed that the analytical solutions were suitable in fitting the observed solute transport. The dispersion coefficient was found to be a function of the soil depth and average pore-water velocity, imposed by the soil water flux. The mobile moisture content on the other hand was not correlated with the average pore-water velocity and the dispersion coefficient.
On the Diffusion Coefficient of Two-step Method for LWR analysis
Energy Technology Data Exchange (ETDEWEB)
Lee, Deokjung; Choi, Sooyoung [UNIST, Ulsan (Korea, Republic of); Smith, Kord S. [Massachusetts Institute of Technology, Cambridge (United States)
2015-10-15
The few-group constants including diffusion coefficients are generated from the assembly calculation results. Once the assembly calculation is done, the cross sections (XSs) are spatially homogenized, and a critical spectrum calculation is performed in order to take into account the neutron leakages of the lattice. The diffusion coefficient is also generated through the critical spectrum calculation. Three different methods of the critical spectrum calculation such as B1 method, P1 method, and fundamental mode (FM) calculation method are considered in this paper. The diffusion coefficients can also be affected by transport approximations for the transport XS calculation which is used in the assembly transport lattice calculation in order to account for the anisotropic scattering effects. The outflow transport approximation and the inflow transport approximation are investigated in this paper. The accuracy of the few group data especially the diffusion coefficients has been studied to optimize the combination of the transport correction methods and the critical spectrum calculation methods using the UNIST lattice physics code STREAM. The combination of the inflow transport approximation and the FM method is shown to provide the highest accuracy in the LWR core calculations. The methodologies to calculate the diffusion coefficients have been reviewed, and the performances of them have been investigated with a LWR core problem. The combination of the inflow transport approximation and the fundamental mode critical spectrum calculation shows the smallest errors in terms of assembly power distribution.
DISCUSSION ON AVERAGE GENERATION OF TWODIMENSIONAL DATA SEQUENCE IN GREY SYSTEM THEORY
Institute of Scientific and Technical Information of China (English)
PINGXue-liang; ZHOURu-rong; LIUSheng-lan
2004-01-01
An unequal time interval sequence or a sequence with blanks is usually completed with average generation in grey system theory. This paper discovers that there exists obvious errors when using average generation to generate internal points of non-consecutive neighbours. The average generation and the preference generation of the sequence are discussed, the concave and convex properties show the status of local sequence and propose a new idea for using the status to build up the criteria of choosing generation coefficient. Compared with the general average method of the one-dimensional data sequence, the two-dimensional data sequence is defined and its average generation is discussed, and the coefficient decision method for the preference generation is presented.
Estimation of the average visibility in central Europe
Horvath, Helmuth
Visibility has been obtained from spectral extinction coefficients measured with the University of Vienna Telephotometer or size distributions determined with an Aerosol Spectrometer. By measuring the extinction coefficient in different directions, possible influences of local sources could be determined easily. A region, undisturbed by local sources usually had a variation of extinction coefficient of less than 10% in different directions. Generally good visibility outside population centers in Europe is considered as 40-50 km. These values have been found independent of the location in central Europe, thus this represents the average European "clean" air. Under rare occasions (normally rapid change of air mass) the visibility can be 100-150 km. In towns, the visibility is a factor of approximately 2 lower. In comparison to this the visibility in remote regions of North and South America is larger by a factor of 2-4. Obviously the lower visibility in Europe is caused by its higher population density. Since the majority of visibility reducing particulate emissions come from small sources such as cars or heating, the emissions per unit area can be considered proportional to the population density. Using a simple box model and the visibility measured in central Europe and in Vienna, the difference in visibility inside and outside the town can be explained quantitatively. It thus is confirmed, that the generally low visibility in central Europe is a consequence of the emissions in connection with human activities and the low visibility (compared, e.g. to North or South America) in remote location such as the Alps is caused by the average European pollution.
Ensemble Averaged Probability Density Function (APDF) for Compressible Turbulent Reacting Flows
Shih, Tsan-Hsing; Liu, Nan-Suey
2012-01-01
In this paper, we present a concept of the averaged probability density function (APDF) for studying compressible turbulent reacting flows. The APDF is defined as an ensemble average of the fine grained probability density function (FG-PDF) with a mass density weighting. It can be used to exactly deduce the mass density weighted, ensemble averaged turbulent mean variables. The transport equation for APDF can be derived in two ways. One is the traditional way that starts from the transport equation of FG-PDF, in which the compressible Navier- Stokes equations are embedded. The resulting transport equation of APDF is then in a traditional form that contains conditional means of all terms from the right hand side of the Navier-Stokes equations except for the chemical reaction term. These conditional means are new unknown quantities that need to be modeled. Another way of deriving the transport equation of APDF is to start directly from the ensemble averaged Navier-Stokes equations. The resulting transport equation of APDF derived from this approach appears in a closed form without any need for additional modeling. The methodology of ensemble averaging presented in this paper can be extended to other averaging procedures: for example, the Reynolds time averaging for statistically steady flow and the Reynolds spatial averaging for statistically homogeneous flow. It can also be extended to a time or spatial filtering procedure to construct the filtered density function (FDF) for the large eddy simulation (LES) of compressible turbulent reacting flows.
Average Transmission Probability of a Random Stack
Lu, Yin; Miniatura, Christian; Englert, Berthold-Georg
2010-01-01
The transmission through a stack of identical slabs that are separated by gaps with random widths is usually treated by calculating the average of the logarithm of the transmission probability. We show how to calculate the average of the transmission probability itself with the aid of a recurrence relation and derive analytical upper and lower…
Average sampling theorems for shift invariant subspaces
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
The sampling theorem is one of the most powerful results in signal analysis. In this paper, we study the average sampling on shift invariant subspaces, e.g. wavelet subspaces. We show that if a subspace satisfies certain conditions, then every function in the subspace is uniquely determined and can be reconstructed by its local averages near certain sampling points. Examples are given.
Testing linearity against nonlinear moving average models
de Gooijer, J.G.; Brännäs, K.; Teräsvirta, T.
1998-01-01
Lagrange multiplier (LM) test statistics are derived for testing a linear moving average model against an additive smooth transition moving average model. The latter model is introduced in the paper. The small sample performance of the proposed tests are evaluated in a Monte Carlo study and compared
Averaging Einstein's equations : The linearized case
Stoeger, William R.; Helmi, Amina; Torres, Diego F.
2007-01-01
We introduce a simple and straightforward averaging procedure, which is a generalization of one which is commonly used in electrodynamics, and show that it possesses all the characteristics we require for linearized averaging in general relativity and cosmology for weak-field and perturbed FLRW situ
Averaging Einstein's equations : The linearized case
Stoeger, William R.; Helmi, Amina; Torres, Diego F.
We introduce a simple and straightforward averaging procedure, which is a generalization of one which is commonly used in electrodynamics, and show that it possesses all the characteristics we require for linearized averaging in general relativity and cosmology for weak-field and perturbed FLRW
Average excitation potentials of air and aluminium
Bogaardt, M.; Koudijs, B.
1951-01-01
By means of a graphical method the average excitation potential I may be derived from experimental data. Average values for Iair and IAl have been obtained. It is shown that in representing range/energy relations by means of Bethe's well known formula, I has to be taken as a continuously changing fu
Average Transmission Probability of a Random Stack
Lu, Yin; Miniatura, Christian; Englert, Berthold-Georg
2010-01-01
The transmission through a stack of identical slabs that are separated by gaps with random widths is usually treated by calculating the average of the logarithm of the transmission probability. We show how to calculate the average of the transmission probability itself with the aid of a recurrence relation and derive analytical upper and lower…
Chen, Yong-Zhou; Fu, Chun-Hua; Chang, Hui; Li, Nan; He, Da-Ren
2008-10-01
In this paper, an empirical investigation is presented, which focuses on unveiling the universality of connectivity correlations in three spaces (the route space, the stop geographical space and bus-transferring space) of urban bus-transport networks (BTNs) in four major cities of China. The underlying features of the connectivity correlations are shown in two statistical ways. One is the correlation between the (weighted) average degree of all the nearest neighbouring vertices with degree k, (Knnw (k)) Knn(k), and k, and the other is the correlations between the assortativity coefficient r and, respectively, the network size N, the network diameter D, the averaged clustering coefficient C, and the averaged distance . The obtained results show qualitatively the same connectivity correlations of all the considered cities under all the three spaces.
Directory of Open Access Journals (Sweden)
Nitish K Mishra
Full Text Available BACKGROUND: Membrane transport proteins (transporters move hydrophilic substrates across hydrophobic membranes and play vital roles in most cellular functions. Transporters represent a diverse group of proteins that differ in topology, energy coupling mechanism, and substrate specificity as well as sequence similarity. Among the functional annotations of transporters, information about their transporting substrates is especially important. The experimental identification and characterization of transporters is currently costly and time-consuming. The development of robust bioinformatics-based methods for the prediction of membrane transport proteins and their substrate specificities is therefore an important and urgent task. RESULTS: Support vector machine (SVM-based computational models, which comprehensively utilize integrative protein sequence features such as amino acid composition, dipeptide composition, physico-chemical composition, biochemical composition, and position-specific scoring matrices (PSSM, were developed to predict the substrate specificity of seven transporter classes: amino acid, anion, cation, electron, protein/mRNA, sugar, and other transporters. An additional model to differentiate transporters from non-transporters was also developed. Among the developed models, the biochemical composition and PSSM hybrid model outperformed other models and achieved an overall average prediction accuracy of 76.69% with a Mathews correlation coefficient (MCC of 0.49 and a receiver operating characteristic area under the curve (AUC of 0.833 on our main dataset. This model also achieved an overall average prediction accuracy of 78.88% and MCC of 0.41 on an independent dataset. CONCLUSIONS: Our analyses suggest that evolutionary information (i.e., the PSSM and the AAIndex are key features for the substrate specificity prediction of transport proteins. In comparison, similarity-based methods such as BLAST, PSI-BLAST, and hidden Markov models
New results on averaging theory and applications
Cândido, Murilo R.; Llibre, Jaume
2016-08-01
The usual averaging theory reduces the computation of some periodic solutions of a system of ordinary differential equations, to find the simple zeros of an associated averaged function. When one of these zeros is not simple, i.e., the Jacobian of the averaged function in it is zero, the classical averaging theory does not provide information about the periodic solution associated to a non-simple zero. Here we provide sufficient conditions in order that the averaging theory can be applied also to non-simple zeros for studying their associated periodic solutions. Additionally, we do two applications of this new result for studying the zero-Hopf bifurcation in the Lorenz system and in the Fitzhugh-Nagumo system.
Analogue Divider by Averaging a Triangular Wave
Selvam, Krishnagiri Chinnathambi
2017-08-01
A new analogue divider circuit by averaging a triangular wave using operational amplifiers is explained in this paper. The triangle wave averaging analog divider using operational amplifiers is explained here. The reference triangular waveform is shifted from zero voltage level up towards positive power supply voltage level. Its positive portion is obtained by a positive rectifier and its average value is obtained by a low pass filter. The same triangular waveform is shifted from zero voltage level to down towards negative power supply voltage level. Its negative portion is obtained by a negative rectifier and its average value is obtained by another low pass filter. Both the averaged voltages are combined in a summing amplifier and the summed voltage is given to an op-amp as negative input. This op-amp is configured to work in a negative closed environment. The op-amp output is the divider output.
Energy Technology Data Exchange (ETDEWEB)
Huerst, C.; Schulz, A.; Wittig, S. [Univ. Karlsruhe (Germany). Lehrstuhl und Inst. fuer Thermische Stroemungsmaschinen
1995-04-01
The present study compares measured and computed heat transfer coefficients for high-speed boundary layer nozzle flows under engine Reynolds number conditions (U{sub {infinity}} = 230 {divided_by} 880 m/s, Re* = 0.37 {divided_by} 1.07 {times} 10{sup 6}). Experimental data have been obtained by heat transfer measurements in a two-dimensional, nonsymmetric, convergent-divergent nozzle. The nozzle wall is convectively cooled using water passages. The coolant heat transfer data and nozzle surface temperatures are used as boundary conditions for a three-dimensional finite-element code, which is employed to calculate the temperature distribution inside the nozzle wall. Heat transfer coefficients along the hot gas nozzle wall are derived from the temperature gradients normal to the surface. The results are compared with numerical heat transfer predictions using the low-Reynolds-number {kappa}-{epsilon} turbulence model by Lam and Bremhorst. Influence of compressibility in the transport equations for the turbulence properties is taken into account by using the local averaged density. The results confirm that this simplification leads to good results for transonic and low supersonic flows.
Exact Averaging of Stochastic Equations for Flow in Porous Media
Energy Technology Data Exchange (ETDEWEB)
Karasaki, Kenzi; Shvidler, Mark; Karasaki, Kenzi
2008-03-15
It is well known that at present, exact averaging of the equations for flow and transport in random porous media have been proposed for limited special fields. Moreover, approximate averaging methods--for example, the convergence behavior and the accuracy of truncated perturbation series--are not well studied, and in addition, calculation of high-order perturbations is very complicated. These problems have for a long time stimulated attempts to find the answer to the question: Are there in existence some, exact, and sufficiently general forms of averaged equations? Here, we present an approach for finding the general exactly averaged system of basic equations for steady flow with sources in unbounded stochastically homogeneous fields. We do this by using (1) the existence and some general properties of Green's functions for the appropriate stochastic problem, and (2) some information about the random field of conductivity. This approach enables us to find the form of the averaged equations without directly solving the stochastic equations or using the usual assumption regarding any small parameters. In the common case of a stochastically homogeneous conductivity field we present the exactly averaged new basic nonlocal equation with a unique kernel-vector. We show that in the case of some type of global symmetry (isotropy, transversal isotropy, or orthotropy), we can for three-dimensional and two-dimensional flow in the same way derive the exact averaged nonlocal equations with a unique kernel-tensor. When global symmetry does not exist, the nonlocal equation with a kernel-tensor involves complications and leads to an ill-posed problem.
Montejo, Ludguier D.; Jia, Jingfei; Kim, Hyun K.; Hielscher, Andreas H.
2013-03-01
We apply the Fourier Transform to absorption and scattering coefficient images of proximal interphalangeal (PIP) joints and evaluate the performance of these coefficients as classifiers using receiver operator characteristic (ROC) curve analysis. We find 25 features that yield a Youden index over 0.7, 3 features that yield a Youden index over 0.8, and 1 feature that yields a Youden index over 0.9 (90.0% sensitivity and 100% specificity). In general, scattering coefficient images yield better one-dimensional classifiers compared to absorption coefficient images. Using features derived from scattering coefficient images we obtain an average Youden index of 0.58 +/- 0.16, and an average Youden index of 0.45 +/- 0.15 when using features from absorption coefficient images.
Comparison of fluence-to-dose conversion coefficients for deuterons, tritons and helions.
Copeland, Kyle; Friedberg, Wallace; Sato, Tatsuhiko; Niita, Koji
2012-02-01
Secondary radiation in aircraft and spacecraft includes deuterons, tritons and helions. Two sets of fluence-to-effective dose conversion coefficients for isotropic exposure to these particles were compared: one used the particle and heavy ion transport code system (PHITS) radiation transport code coupled with the International Commission on Radiological Protection (ICRP) reference phantoms (PHITS-ICRP) and the other the Monte Carlo N-Particle eXtended (MCNPX) radiation transport code coupled with modified BodyBuilder™ phantoms (MCNPX-BB). Also, two sets of fluence-to-effective dose equivalent conversion coefficients calculated using the PHITS-ICRP combination were compared: one used quality factors based on linear energy transfer; the other used quality factors based on lineal energy (y). Finally, PHITS-ICRP effective dose coefficients were compared with PHITS-ICRP effective dose equivalent coefficients. The PHITS-ICRP and MCNPX-BB effective dose coefficients were similar, except at high energies, where MCNPX-BB coefficients were higher. For helions, at most energies effective dose coefficients were much greater than effective dose equivalent coefficients. For deuterons and tritons, coefficients were similar when their radiation weighting factor was set to 2.
Exploring non-linear cosmological matter diffusion coefficients
Velten, Hermano
2014-01-01
Since microscopic velocity diffusion can be incorporated into general relativity in a consistent way, we study cosmological background solutions when the diffusion phenomena takes place in an expanding universe. Our focus here relies on the nature of the diffusion coefficient $\\sigma$ which measures the magnitude of such transport phenomena. We test dynamics where $\\sigma$ has a phenomenological dependence on the scale factor, the matter density, the dark energy and the expansion rate.
Averaged Lema\\^itre-Tolman-Bondi dynamics
Isidro, Eddy G Chirinos; Piattella, Oliver F; Zimdahl, Winfried
2016-01-01
We consider cosmological backreaction effects in Buchert's averaging formalism on the basis of an explicit solution of the Lema\\^itre-Tolman-Bondi (LTB) dynamics which is linear in the LTB curvature parameter and has an inhomogeneous bang time. The volume Hubble rate is found in terms of the volume scale factor which represents a derivation of the simplest phenomenological solution of Buchert's equations in which the fractional densities corresponding to average curvature and kinematic backreaction are explicitly determined by the parameters of the underlying LTB solution at the boundary of the averaging volume. This configuration represents an exactly solvable toy model but it does not adequately describe our "real" Universe.
Average-passage flow model development
Adamczyk, John J.; Celestina, Mark L.; Beach, Tim A.; Kirtley, Kevin; Barnett, Mark
1989-01-01
A 3-D model was developed for simulating multistage turbomachinery flows using supercomputers. This average passage flow model described the time averaged flow field within a typical passage of a bladed wheel within a multistage configuration. To date, a number of inviscid simulations were executed to assess the resolution capabilities of the model. Recently, the viscous terms associated with the average passage model were incorporated into the inviscid computer code along with an algebraic turbulence model. A simulation of a stage-and-one-half, low speed turbine was executed. The results of this simulation, including a comparison with experimental data, is discussed.
FREQUENTIST MODEL AVERAGING ESTIMATION: A REVIEW
Institute of Scientific and Technical Information of China (English)
Haiying WANG; Xinyu ZHANG; Guohua ZOU
2009-01-01
In applications, the traditional estimation procedure generally begins with model selection.Once a specific model is selected, subsequent estimation is conducted under the selected model without consideration of the uncertainty from the selection process. This often leads to the underreporting of variability and too optimistic confidence sets. Model averaging estimation is an alternative to this procedure, which incorporates model uncertainty into the estimation process. In recent years, there has been a rising interest in model averaging from the frequentist perspective, and some important progresses have been made. In this paper, the theory and methods on frequentist model averaging estimation are surveyed. Some future research topics are also discussed.
Averaging of Backscatter Intensities in Compounds
Donovan, John J.; Pingitore, Nicholas E.; Westphal, Andrew J.
2002-01-01
Low uncertainty measurements on pure element stable isotope pairs demonstrate that mass has no influence on the backscattering of electrons at typical electron microprobe energies. The traditional prediction of average backscatter intensities in compounds using elemental mass fractions is improperly grounded in mass and thus has no physical basis. We propose an alternative model to mass fraction averaging, based of the number of electrons or protons, termed “electron fraction,” which predicts backscatter yield better than mass fraction averaging. PMID:27446752
Experimental Demonstration of Squeezed State Quantum Averaging
Lassen, Mikael; Sabuncu, Metin; Filip, Radim; Andersen, Ulrik L
2010-01-01
We propose and experimentally demonstrate a universal quantum averaging process implementing the harmonic mean of quadrature variances. The harmonic mean protocol can be used to efficiently stabilize a set of fragile squeezed light sources with statistically fluctuating noise levels. The averaged variances are prepared probabilistically by means of linear optical interference and measurement induced conditioning. We verify that the implemented harmonic mean outperforms the standard arithmetic mean strategy. The effect of quantum averaging is experimentally tested both for uncorrelated and partially correlated noise sources with sub-Poissonian shot noise or super-Poissonian shot noise characteristics.
The Average Lower Connectivity of Graphs
Directory of Open Access Journals (Sweden)
Ersin Aslan
2014-01-01
Full Text Available For a vertex v of a graph G, the lower connectivity, denoted by sv(G, is the smallest number of vertices that contains v and those vertices whose deletion from G produces a disconnected or a trivial graph. The average lower connectivity denoted by κav(G is the value (∑v∈VGsvG/VG. It is shown that this parameter can be used to measure the vulnerability of networks. This paper contains results on bounds for the average lower connectivity and obtains the average lower connectivity of some graphs.
Cosmic inhomogeneities and averaged cosmological dynamics.
Paranjape, Aseem; Singh, T P
2008-10-31
If general relativity (GR) describes the expansion of the Universe, the observed cosmic acceleration implies the existence of a "dark energy." However, while the Universe is on average homogeneous on large scales, it is inhomogeneous on smaller scales. While GR governs the dynamics of the inhomogeneous Universe, the averaged homogeneous Universe obeys modified Einstein equations. Can such modifications alone explain the acceleration? For a simple generic model with realistic initial conditions, we show the answer to be "no." Averaging effects negligibly influence the cosmological dynamics.
Changing mortality and average cohort life expectancy
DEFF Research Database (Denmark)
Schoen, Robert; Canudas-Romo, Vladimir
2005-01-01
of survivorship. An alternative aggregate measure of period mortality which has been seen as less sensitive to period changes, the cross-sectional average length of life (CAL) has been proposed as an alternative, but has received only limited empirical or analytical examination. Here, we introduce a new measure......, the average cohort life expectancy (ACLE), to provide a precise measure of the average length of life of cohorts alive at a given time. To compare the performance of ACLE with CAL and with period and cohort life expectancy, we first use population models with changing mortality. Then the four aggregate...
Quantum transport in chains with noisy off-diagonal couplings.
Pereverzev, Andrey; Bittner, Eric R
2005-12-22
We present a model for conductivity and energy diffusion in a linear chain described by a quadratic Hamiltonian with Gaussian noise. We show that when the correlation matrix is diagonal, the noise-averaged Liouville-von Neumann equation governing the time evolution of the system reduces to the [Lindblad, Commun. Math. Phys. 48, 119 (1976)] equation with Hermitian Lindblad operators. We show that the noise-averaged density matrix for the system expectation values of the energy density and the number density satisfies discrete versions of the heat and diffusion equations. Transport coefficients are given in terms of model Hamiltonian parameters. We discuss conditions on the Hamiltonian under which the noise-averaged expectation value of the total energy remains constant. For chains placed between two heat reservoirs, the gradient of the energy density along the chain is linear.
Enhancement of Seebeck Coefficients by Resonant Tunneling Effect
Daqiq, Reza
2017-10-01
The Seebeck coefficients in an MgO-based double-barrier magnetic tunnel junction (DBMTJ) with a semiconductor (e.g., Ge) spacer are studied using non-equilibrium Green's function formalism in the linear response regime. The DBMTJ results show a magnitude enhancement compared with a single-barrier MTJ (SBMTJ) at the specific thicknesses of the semiconductor spacer due to the resonant tunneling effect through the DBMTJ structure. With an increase of the average temperature of the junctions, the Seebeck coefficients also increase and they are at a maximum in the anti-parallel configuration of the magnetizations. Therefore, it is possible to achieve large Seebeck coefficients using a DBMTJ compared with a conventional SBMTJ structure.
Sea Surface Temperature Average_SST_Master
National Oceanic and Atmospheric Administration, Department of Commerce — Sea surface temperature collected via satellite imagery from http://www.esrl.noaa.gov/psd/data/gridded/data.noaa.ersst.html and averaged for each region using ArcGIS...
Appeals Council Requests - Average Processing Time
Social Security Administration — This dataset provides annual data from 1989 through 2015 for the average processing time (elapsed time in days) for dispositions by the Appeals Council (AC) (both...
Average Vegetation Growth 1990 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1990 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 1997 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1997 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 1992 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1992 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 2001 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2001 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 1995 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1995 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 2000 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2000 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 1998 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1998 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 1994 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1994 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
MN Temperature Average (1961-1990) - Line
Minnesota Department of Natural Resources — This data set depicts 30-year averages (1961-1990) of monthly and annual temperatures for Minnesota. Isolines and regions were created using kriging and...
Average Vegetation Growth 1996 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1996 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 2005 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2005 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
Average Vegetation Growth 1993 - Direct Download
U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1993 average vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the...
MN Temperature Average (1961-1990) - Polygon
Minnesota Department of Natural Resources — This data set depicts 30-year averages (1961-1990) of monthly and annual temperatures for Minnesota. Isolines and regions were created using kriging and...
Spacetime Average Density (SAD) Cosmological Measures
Page, Don N
2014-01-01
The measure problem of cosmology is how to obtain normalized probabilities of observations from the quantum state of the universe. This is particularly a problem when eternal inflation leads to a universe of unbounded size so that there are apparently infinitely many realizations or occurrences of observations of each of many different kinds or types, making the ratios ambiguous. There is also the danger of domination by Boltzmann Brains. Here two new Spacetime Average Density (SAD) measures are proposed, Maximal Average Density (MAD) and Biased Average Density (BAD), for getting a finite number of observation occurrences by using properties of the Spacetime Average Density (SAD) of observation occurrences to restrict to finite regions of spacetimes that have a preferred beginning or bounce hypersurface. These measures avoid Boltzmann brain domination and appear to give results consistent with other observations that are problematic for other widely used measures, such as the observation of a positive cosmolo...
A practical guide to averaging functions
Beliakov, Gleb; Calvo Sánchez, Tomasa
2016-01-01
This book offers an easy-to-use and practice-oriented reference guide to mathematical averages. It presents different ways of aggregating input values given on a numerical scale, and of choosing and/or constructing aggregating functions for specific applications. Building on a previous monograph by Beliakov et al. published by Springer in 2007, it outlines new aggregation methods developed in the interim, with a special focus on the topic of averaging aggregation functions. It examines recent advances in the field, such as aggregation on lattices, penalty-based aggregation and weakly monotone averaging, and extends many of the already existing methods, such as: ordered weighted averaging (OWA), fuzzy integrals and mixture functions. A substantial mathematical background is not called for, as all the relevant mathematical notions are explained here and reported on together with a wealth of graphical illustrations of distinct families of aggregation functions. The authors mainly focus on practical applications ...
Rotational averaging of multiphoton absorption cross sections
Energy Technology Data Exchange (ETDEWEB)
Friese, Daniel H., E-mail: daniel.h.friese@uit.no; Beerepoot, Maarten T. P.; Ruud, Kenneth [Centre for Theoretical and Computational Chemistry, University of Tromsø — The Arctic University of Norway, N-9037 Tromsø (Norway)
2014-11-28
Rotational averaging of tensors is a crucial step in the calculation of molecular properties in isotropic media. We present a scheme for the rotational averaging of multiphoton absorption cross sections. We extend existing literature on rotational averaging to even-rank tensors of arbitrary order and derive equations that require only the number of photons as input. In particular, we derive the first explicit expressions for the rotational average of five-, six-, and seven-photon absorption cross sections. This work is one of the required steps in making the calculation of these higher-order absorption properties possible. The results can be applied to any even-rank tensor provided linearly polarized light is used.
Rotational averaging of multiphoton absorption cross sections
Friese, Daniel H.; Beerepoot, Maarten T. P.; Ruud, Kenneth
2014-11-01
Rotational averaging of tensors is a crucial step in the calculation of molecular properties in isotropic media. We present a scheme for the rotational averaging of multiphoton absorption cross sections. We extend existing literature on rotational averaging to even-rank tensors of arbitrary order and derive equations that require only the number of photons as input. In particular, we derive the first explicit expressions for the rotational average of five-, six-, and seven-photon absorption cross sections. This work is one of the required steps in making the calculation of these higher-order absorption properties possible. The results can be applied to any even-rank tensor provided linearly polarized light is used.
Monthly snow/ice averages (ISCCP)
National Aeronautics and Space Administration — September Arctic sea ice is now declining at a rate of 11.5 percent per decade, relative to the 1979 to 2000 average. Data from NASA show that the land ice sheets in...
Average Annual Precipitation (PRISM model) 1961 - 1990
U.S. Geological Survey, Department of the Interior — This map layer shows polygons of average annual precipitation in the contiguous United States, for the climatological period 1961-1990. Parameter-elevation...
Measurement of the internal magnetic fluctuation by the transport of runaways on J-TEXT
Chen, Z. Y.; Huang, D. W.; Tong, R. H.; Yan, W.; Wei, Y. N.; Ma, T. K.; Jiang, Z. H.; Zhang, X. Q.; Chen, Z. P.; Yang, Z. J.; Zhuang, G.
2016-11-01
The measurement of internal magnetic fluctuation is important for the study of transport in tokamak plasmas. The runaway electron transport induced by the sawtooth crash can be used to obtain the internal magnetic fluctuation. Inversed sawtooth-like activities on hard x-ray (HXR) fluxes following sawtooth activities were observed after the application of electrode biasing on J-TEXT tokamak. The runaway diffusion coefficient Dr is deduced to be about 30 m2/s according to the time delay of HXR flux peaks to the sawtooth crashes. The averaged value of normalized magnetic fluctuation in the discharges with electrode biasing was increased to the order of 1 × 10-4.
Photon-Assisted Electron Transport for a A-shaped Carbon Nanotube Junction
Institute of Scientific and Technical Information of China (English)
JIANG Lian-Jun; LIAO Wen-Hu; ZHOU Guang-Hui
2008-01-01
We theoretically study the electron transport properties for two coupled single-walled carbon nanotube quantum dots connected to metallic electrodes under the irradiation of an external electromagnetic field at low temperatures.Using the standard nonequilibrium Green's function techniques,we examine the time-averaged transmission coefficient and linear conductance.It is shown that by some numerical examples,the photon-assisted inter-dot coupling causes Fano resonance and the conductance of the system is sensitive to the externaJ field parameters.The transport dependence on the external field parameters may be used to detect the high-frequency microwave irradiation.
Higher Order Macro Coefficients in Periodic Homogenization
Energy Technology Data Exchange (ETDEWEB)
Conca, Carlos; San Martin, Jorge [Departamento de IngenierIa Matematica, Facultad de Ciencias Fisicas y Matematicas, Universidad de Chile and Centro de Modelamiento Matematico, UMR 2071 CNRS-UChile, Casilla 170/3 - Correo 3, Santiago (Chile); Smaranda, Loredana [Department of Mathematics, Faculty of Mathematics and Computer Science, University of Pitesti, 110040 Pitesti, Str. Targu din Vale Nr.1, Arges (Romania); Vanninathan, Muthusamy, E-mail: cconca@dim.uchile.cl, E-mail: jorge@dim.uchile.cl, E-mail: smaranda@dim.uchile.cl, E-mail: vanni@math.tifrbng.res.in [TIFR-CAM, Post Bag 6503, GKVK Post, Bangalore - 560065 (India)
2011-09-15
A first set of macro coefficients known as the homogenized coefficients appear in the homogenization of PDE on periodic structures. If energy is increased or scale is decreased, these coefficients do not provide adequate approximation. Using Bloch decomposition, it is first realized that the above coefficients correspond to the lowest energy and the largest scale. This naturally paves the way to introduce other sets of macro coefficients corresponding to higher energies and lower scales which yield better approximation. The next task is to compare their properties with those of the homogenized coefficients. This article reviews these developments along with some new results yet to be published.
In-situ estimate of submesoscale horizontal eddy diffusion coefficients across a front
Nencioli, Francesco; d'Ovidio, Francesco; Doglioli, Andrea; Petrenko, Anne
2013-04-01
Fronts, jets and eddies are ubiquitous features of the world oceans, and play a key role in regulating energy budget, heat transfer, horizontal and vertical transport, and biogeochemical processes. Although recent advances in computational power have favored the analysis of mesoscale and submesoscale dynamics from high-resolution numerical simulations, studies from in-situ observations are still relatively scarce. The small dimensions and short duration of such structures still pose major challenges for fine-scale dedicated field experiments. As a consequence, in-situ quantitative estimates of key physical parameters for high-resolution numerical models, such as horizontal eddy diffusion coefficients, are still lacking. The Latex10 campaign (September 1-24, 2010), within the LAgrangian Transport EXperiment (LATEX), adopted an adaptive sampling strategy that included satellite data, ship-based current measurements, and iterative Lagrangian drifter releases to successfully map coherent transport structures in the western Gulf of Lion. Comparisons with AVHRR imagery evidenced that the detected structures were associated with an intense frontal feature, originated by the convergence and subsequent stirring of colder coastal waters with warmer open-sea waters. We present a method for computing horizontal eddy diffusion coefficients by combining the stirring rates estimated from the Lagrangian drifter trajectories with the shapes of the surface temperature and salinity gradient (assumed to be at the equilibrium) from the ship thermosalinograph. The average value we obtained from various sections across the front is 2.5 m2s-1, with horizontal scales (width of the front) ranging between 0.5 and 2.5 km. This is in line with the values commonly used for high-resolution numerical simulations. Further field experiment will be required to extend the results to different ocean regions and regimes, and to thoroughly test the robustness of the equilibrium hypothesis. Remote sensed
Symmetric Euler orientation representations for orientational averaging.
Mayerhöfer, Thomas G
2005-09-01
A new kind of orientation representation called symmetric Euler orientation representation (SEOR) is presented. It is based on a combination of the conventional Euler orientation representations (Euler angles) and Hamilton's quaternions. The properties of the SEORs concerning orientational averaging are explored and compared to those of averaging schemes that are based on conventional Euler orientation representations. To that aim, the reflectance of a hypothetical polycrystalline material with orthorhombic crystal symmetry was calculated. The calculation was carried out according to the average refractive index theory (ARIT [T.G. Mayerhöfer, Appl. Spectrosc. 56 (2002) 1194]). It is shown that the use of averaging schemes based on conventional Euler orientation representations leads to a dependence of the result from the specific Euler orientation representation that was utilized and from the initial position of the crystal. The latter problem can be overcome partly by the introduction of a weighing factor, but only for two-axes-type Euler orientation representations. In case of a numerical evaluation of the average, a residual difference remains also if a two-axes type Euler orientation representation is used despite of the utilization of a weighing factor. In contrast, this problem does not occur if a symmetric Euler orientation representation is used as a matter of principle, while the result of the averaging for both types of orientation representations converges with increasing number of orientations considered in the numerical evaluation. Additionally, the use of a weighing factor and/or non-equally spaced steps in the numerical evaluation of the average is not necessary. The symmetrical Euler orientation representations are therefore ideally suited for the use in orientational averaging procedures.
Cosmic Inhomogeneities and the Average Cosmological Dynamics
Paranjape, Aseem; Singh, T. P.
2008-01-01
If general relativity (GR) describes the expansion of the Universe, the observed cosmic acceleration implies the existence of a `dark energy'. However, while the Universe is on average homogeneous on large scales, it is inhomogeneous on smaller scales. While GR governs the dynamics of the \\emph{in}homogeneous Universe, the averaged \\emph{homogeneous} Universe obeys modified Einstein equations. Can such modifications alone explain the acceleration? For a simple generic model with realistic ini...
Average Bandwidth Allocation Model of WFQ
Directory of Open Access Journals (Sweden)
Tomáš Balogh
2012-01-01
Full Text Available We present a new iterative method for the calculation of average bandwidth assignment to traffic flows using a WFQ scheduler in IP based NGN networks. The bandwidth assignment calculation is based on the link speed, assigned weights, arrival rate, and average packet length or input rate of the traffic flows. We prove the model outcome with examples and simulation results using NS2 simulator.
Geometry of quantum transport for dephasing Lindbladians
Avron, J E; Graf, G M; Kenneth, O
2010-01-01
We develop a geometric theory of adiabatic transport in driven open systems governed by dephasing Lindbladians. The coefficients of dissipative transport are determined by the Fubini-Study metric and the coefficients of non-dissipative transport by the adiabatic curvature. This gives a possible mechanism for residual resistance for gapped systems at low temperatures. When the metric and symplectic form are compatible non-dissipative terms in the inverse matrix of transport coefficients are immune to dephasing. We give three examples of compatible systems: The qubit, coherent states for the Harmonic oscillator and the lowest Landau level on a torus.
Organ and Effective Dose Coefficients for Cranial and Caudal Irradiation Geometries: Neutrons
Veinot, K. G.; Eckerman, K. F.; Hertel, N. E.; Hiller, M. M.
2017-09-01
With the introduction of new recommendations by ICRP Publication 103, the methodology for determining the protection quantity, effective dose, has been modified. The modifications include changes to the defined organs and tissues, the associated tissue weighting factors, radiation weighting factors, and the introduction of reference sex-specific computational phantoms (ICRP Publication 110). Computations of equivalent doses in organs and tissues are now performed in both the male and female phantoms and the sex-averaged values used to determine the effective dose. Dose coefficients based on the ICRP 103 recommendations were reported in ICRP Publication 116, the revision of ICRP Publication 74 and ICRU Publication 57. The coefficients were determined for the following irradiation geometries: anterior-posterior (AP), posterior-anterior (PA), right and left lateral (RLAT and LLAT), rotational (ROT), and isotropic (ISO). In this work, the methodology of ICRP Publication 116 was used to compute dose coefficients for neutron irradiation of the body with parallel beams directed upward from below the feet (caudal) and directed downward from above the head (cranial). These geometries may be encountered in the workplace from personnel standing on contaminated surfaces or volumes and from overhead sources. Calculations of organ and tissue absorbed doses for caudal and cranial exposures to neutrons ranging in energy from 10-9 MeV to 10 GeV have been performed using the MCNP6 radiation transport code and the adult reference voxel phantoms of ICRP Publication 110. At lower energies the effective dose per particle fluence for cranial and caudal exposures is less than AP orientations while above about 30 MeV the cranial and caudal values are greater.
Simultaneous Description of Activity Coefficients and Solubility with eCPA
DEFF Research Database (Denmark)
Schlaikjer, Anders; Thomsen, Kaj; Kontogeorgis, Georgios
2017-01-01
with salt specific parameters. The focus is on accurate description of the salt solubility, and low deviation correlations are obtained for all salts investigated. The inclusion of the solubility data in the parametrization has, compared to parameters only parametrized to osmotic coefficients and activity...... coefficients, not significantly affected the deviations of the osmotic coefficients and activity coefficients. The average deviations of the activity coefficient does increase slightly and it was found that the increase in deviations was almost entirely due to reduced accuracy at high temperature and high...... molality. The model is, furthermore, compared to the activity coefficient model, Extended UNIQUAC. It is shown that the eCPA provides more accurate solubility description at higher temperatures than Extended UNIQUAC but also that Extended UNIQUAC is slightly better at describing the activity coefficients...
A computational approach to calculate the heat of transport of aqueous solutions
Di Lecce, Silvia; Albrecht, Tim; Bresme, Fernando
2017-01-01
Thermal gradients induce concentration gradients in alkali halide solutions, and the salt migrates towards hot or cold regions depending on the average temperature of the solution. This effect has been interpreted using the heat of transport, which provides a route to rationalize thermophoretic phenomena. Early theories provide estimates of the heat of transport at infinite dilution. These values are used to interpret thermodiffusion (Soret) and thermoelectric (Seebeck) effects. However, accessing heats of transport of individual ions at finite concentration remains an outstanding question both theoretically and experimentally. Here we discuss a computational approach to calculate heats of transport of aqueous solutions at finite concentrations, and apply our method to study lithium chloride solutions at concentrations >0.5 M. The heats of transport are significantly different for Li+ and Cl− ions, unlike what is expected at infinite dilution. We find theoretical evidence for the existence of minima in the Soret coefficient of LiCl, where the magnitude of the heat of transport is maximized. The Seebeck coefficient obtained from the ionic heats of transport varies significantly with temperature and concentration. We identify thermodynamic conditions leading to a maximization of the thermoelectric response of aqueous solutions.
Note on Two Generalizations of Coefficient Alpha.
Raju, Nambury S.
1979-01-01
An important relationship is given for two generalizations of coefficient alpha: (1) Rajaratnam, Cronbach, and Gleser's generalizability formula for stratified-parallel tests, and (2) Raju's coefficient beta. (Author/CTM)
Energy coefficients for a propeller series
DEFF Research Database (Denmark)
Olsen, Anders Smærup
2004-01-01
The efficiency for a propeller is calculated by energy coefficients. These coefficients are related to four types of losses, i.e. the axial, the rotational, the frictional, and the finite blade number loss, and one gain, i.e. the axial gain. The energy coefficients are derived by use of the poten......The efficiency for a propeller is calculated by energy coefficients. These coefficients are related to four types of losses, i.e. the axial, the rotational, the frictional, and the finite blade number loss, and one gain, i.e. the axial gain. The energy coefficients are derived by use...... of the potential theory with the propeller modelled as an actuator disk. The efficiency based on the energy coefficients is calculated for a propeller series. The results show a good agreement between the efficiency based on the energy coefficients and the efficiency obtained by a vortex-lattice method....
Index-free Heat Kernel Coefficients
De van Ven, A E M
1998-01-01
Using index-free notation, we present the diagonal values of the first five heat kernel coefficients associated with a general Laplace-type operator on a compact Riemannian space without boundary. The fifth coefficient appears here for the first time. For a flat space with a gauge connection, the sixth coefficient is given too. Also provided are the leading terms for any coefficient, both in ascending and descending powers of the Yang-Mills and Riemann curvatures, to the same order as required for the fourth coefficient. These results are obtained by directly solving the relevant recursion relations, working in Fock-Schwinger gauge and Riemann normal coordinates. Our procedure is thus noncovariant, but we show that for any coefficient the `gauged' respectively `curved' version is found from the corresponding `non-gauged' respectively `flat' coefficient by making some simple covariant substitutions. These substitutions being understood, the coefficients retain their `flat' form and size. In this sense the fift...
Certain Binomial Sums with recursive coefficients
Kilic, Emrah
2010-01-01
In this short note, we establish some identities containing sums of binomials with coefficients satisfying third order linear recursive relations. As a result and in particular, we obtain general forms of earlier identities involving binomial coefficients and Fibonacci type sequences.
Miles, Rachael E H; Davies, James F; Reid, Jonathan P
2016-07-20
We explore the dependence of the evaporation coefficient of water from aqueous droplets on the composition of a surface film, considering in particular the influence of monolayer mixed component films on the evaporative mass flux. Measurements with binary component films formed from long chain alcohols, specifically tridecanol (C13H27OH) and pentadecanol (C15H31OH), and tetradecanol (C14H29OH) and hexadecanol (C16H33OH), show that the evaporation coefficient is dependent on the mole fractions of the two components forming the monolayer film. Immediately at the point of film formation and commensurate reduction in droplet evaporation rate, the evaporation coefficient is equal to a mole fraction weighted average of the evaporation coefficients through the equivalent single component films. As a droplet continues to diminish in surface area with continued loss of water, the more-soluble, shorter alkyl chain component preferentially partitions into the droplet bulk with the evaporation coefficient tending towards that through a single component film formed simply from the less-soluble, longer chain alcohol. We also show that the addition of a long chain alcohol to an aqueous-sucrose droplet can facilitate control over the degree of dehydration achieved during evaporation. After undergoing rapid gas-phase diffusion limited water evaporation, binary aqueous-sucrose droplets show a continued slow evaporative flux that is limited by slow diffusional mass transport within the particle bulk due to the rapidly increasing particle viscosity and strong concentration gradients that are established. The addition of a long chain alcohol to the droplet is shown to slow the initial rate of water loss, leading to a droplet composition that remains more homogeneous for a longer period of time. When the sucrose concentration has achieved a sufficiently high value, and the diffusion constant of water has decreased accordingly so that bulk phase diffusion arrest occurs in the monolayer
Porth, O.; Vorster, M. J.; Lyutikov, M.; Engelbrecht, N. E.
2016-08-01
We study the transport of high-energy particles in pulsar wind nebulae (PWN) using three-dimensional magnetohydrodynamic (MHD) and test-particle simulations, as well as a Fokker-Planck particle transport model. The latter includes radiative and adiabatic losses, diffusion, and advection on the background flow of the simulated MHD nebula. By combining the models, the spatial evolution of flux and photon index of the X-ray synchrotron emission is modelled for the three nebulae G21.5-0.9, the inner regions of Vela, and 3C 58, thereby allowing us to derive governing parameters: the magnetic field strength, average flow velocity, and spatial diffusion coefficient. For comparison, the nebulae are also modelled with the semi-analytic Kennel & Coroniti model but the Porth et al. model generally yields better fits to the observational data. We find that high velocity fluctuations in the turbulent nebula (downstream of the termination shock) give rise to efficient diffusive transport of particles, with average Péclet number close to unity, indicating that both advection and diffusion play an important role in particle transport. We find that the diffusive transport coefficient of the order of ˜ 2 × 1027(Ls/0.42 Ly) cm2 s- 1 (Ls is the size of the termination shock) is independent of energy up to extreme particle Lorentz factors of γp ˜ 1010.
Averaged controllability of parameter dependent conservative semigroups
Lohéac, Jérôme; Zuazua, Enrique
2017-02-01
We consider the problem of averaged controllability for parameter depending (either in a discrete or continuous fashion) control systems, the aim being to find a control, independent of the unknown parameters, so that the average of the states is controlled. We do it in the context of conservative models, both in an abstract setting and also analysing the specific examples of the wave and Schrödinger equations. Our first result is of perturbative nature. Assuming the averaging probability measure to be a small parameter-dependent perturbation (in a sense that we make precise) of an atomic measure given by a Dirac mass corresponding to a specific realisation of the system, we show that the averaged controllability property is achieved whenever the system corresponding to the support of the Dirac is controllable. Similar tools can be employed to obtain averaged versions of the so-called Ingham inequalities. Particular attention is devoted to the 1d wave equation in which the time-periodicity of solutions can be exploited to obtain more precise results, provided the parameters involved satisfy Diophantine conditions ensuring the lack of resonances.
Average Temperatures in the Southwestern United States, 2000-2015 Versus Long-Term Average
U.S. Environmental Protection Agency — This indicator shows how the average air temperature from 2000 to 2015 has differed from the long-term average (1895–2015). To provide more detailed information,...
Standards for Standardized Logistic Regression Coefficients
Menard, Scott
2011-01-01
Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…
Comparing linear probability model coefficients across groups
DEFF Research Database (Denmark)
Holm, Anders; Ejrnæs, Mette; Karlson, Kristian Bernt
2015-01-01
This article offers a formal identification analysis of the problem in comparing coefficients from linear probability models between groups. We show that differences in coefficients from these models can result not only from genuine differences in effects, but also from differences in one or more...... these limitations, and we suggest a restricted approach to using linear probability model coefficients in group comparisons....
Note on Methodology: The Coefficient of Variation.
Sheret, Michael
1984-01-01
Addresses applications of the coefficient of variation as a measure of educational inequality or as a means of measuring changes of inequality status. Suggests the Gini coefficient has many advantages over the coefficient of variation since it can be used with the Lorenz curve (Lorenz provides detail Gini omits). (BRR)
Coefficient of Partial Correlation and Its Calculation
Institute of Scientific and Technical Information of China (English)
段全才; 张保法
1992-01-01
This thesis offers the general concept of coefficient of partial correlation.Starting with regres-sion analysis,the paper,by using samples,infers the general formula of expressing coefficient of partial correlation by way of simple correlation coefficient.
Soccer Ball Lift Coefficients via Trajectory Analysis
Goff, John Eric; Carre, Matt J.
2010-01-01
We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…
Soccer Ball Lift Coefficients via Trajectory Analysis
Goff, John Eric; Carre, Matt J.
2010-01-01
We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…
Ageing effect of chloride diffusion coefficient
Polder, R.B.
2006-01-01
Most of the currently used models to predict chloride ingress a constant diffusion coefficient over time. However, a reduction of the diffusion coefficient over time, is ob-served at specimens that are exposed to chlorides. This reduction of the diffusion coefficient is expressed with the ageing coe
Standards for Standardized Logistic Regression Coefficients
Menard, Scott
2011-01-01
Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…
Note on Methodology: The Coefficient of Variation.
Sheret, Michael
1984-01-01
Addresses applications of the coefficient of variation as a measure of educational inequality or as a means of measuring changes of inequality status. Suggests the Gini coefficient has many advantages over the coefficient of variation since it can be used with the Lorenz curve (Lorenz provides detail Gini omits). (BRR)
Backscatter coefficient estimation using tapers with gaps.
Luchies, Adam C; Oelze, Michael L
2015-04-01
When using the backscatter coefficient (BSC) to estimate quantitative ultrasound parameters such as the effective scatterer diameter (ESD) and the effective acoustic concentration (EAC), it is necessary to assume that the interrogated medium contains diffuse scatterers. Structures that invalidate this assumption can affect the estimated BSC parameters in terms of increased bias and variance and decrease performance when classifying disease. In this work, a method was developed to mitigate the effects of echoes from structures that invalidate the assumption of diffuse scattering, while preserving as much signal as possible for obtaining diffuse scatterer property estimates. Backscattered signal sections that contained nondiffuse signals were identified and a windowing technique was used to provide BSC estimates for diffuse echoes only. Experiments from physical phantoms were used to evaluate the effectiveness of the proposed BSC estimation methods. Tradeoffs associated with effective mitigation of specular scatterers and bias and variance introduced into the estimates were quantified. Analysis of the results suggested that discrete prolate spheroidal (PR) tapers with gaps provided the best performance for minimizing BSC error. Specifically, the mean square error for BSC between measured and theoretical had an average value of approximately 1.0 and 0.2 when using a Hanning taper and PR taper respectively, with six gaps. The BSC error due to amplitude bias was smallest for PR (Nω = 1) tapers. The BSC error due to shape bias was smallest for PR (Nω = 4) tapers. These results suggest using different taper types for estimating ESD versus EAC. © The Author(s) 2014.
Coefficient of Performance Enhancement of Refrigeration Cycles
Directory of Open Access Journals (Sweden)
Eng. Naser R. M. AL-Ajmi
2015-03-01
Full Text Available Refrigerator is one of the home appliance utilizing mechanical vapor compression cycle in its process. Performance of the systems become the main issue and many researches are still ongoing to evaluate and improve the efficiency of any used system. Therefore, this paper presents an experimental investigation of the performance of the refrigeration cycles. A small rrefrigerator is used as the test rig. The Coefficient of Performance (COP is studied by using different condenser designs and under varying evaporator loads. Three condenser designs are used in present work. These condensers are regular condenser of domestic refrigerator, condenser with copper plain tubes (Cond.1 and condenser with copper tubes welded with stainless steel flat plate (Cond.2. pressures and temperatures measurements of each point in the refrigeration cycle are collected in order to evaluate the refrigerator performance. The results showed that the average COP of Cond.1 and Cond.2 are increased up to 20 % and 14% respectively more than regular condenser design under no load. The evaporator load effects on the machine performance, where the COP of the machine increases with the increase of the evaporator load.
Sedimentation coefficient distributions of large particles.
Schuck, Peter
2016-07-21
The spatial and temporal evolution of concentration boundaries in sedimentation velocity analytical ultracentrifugation reports on the size distribution of particles with high hydrodynamic resolution. For large particles such as large protein complexes, fibrils, viral particles, or nanoparticles, sedimentation conditions usually allow migration from diffusion to be neglected relative to sedimentation. In this case, the shape of the sedimentation boundaries of polydisperse mixtures relates directly to the underlying size-distributions. Integral and derivative methods for calculating sedimentation coefficient distributions g*(s) of large particles from experimental boundary profiles have been developed previously, and are recapitulated here in a common theoretical framework. This leads to a previously unrecognized relationship between g*(s) and the time-derivative of concentration profiles. Of closed analytical form, it is analogous to the well-known Bridgman relationship for the radial derivative. It provides a quantitative description of the effect of substituting the time-derivative by scan differences with finite time intervals, which appears as a skewed box average of the true distribution. This helps to theoretically clarify the differences between results from time-derivative method and the approach of directly fitting the integral definition of g*(s) to the entirety of experimental boundary data.
Cosmic structure, averaging and dark energy
Wiltshire, David L
2013-01-01
These lecture notes review the theoretical problems associated with coarse-graining the observed inhomogeneous structure of the universe at late epochs, of describing average cosmic evolution in the presence of growing inhomogeneity, and of relating average quantities to physical observables. In particular, a detailed discussion of the timescape scenario is presented. In this scenario, dark energy is realized as a misidentification of gravitational energy gradients which result from gradients in the kinetic energy of expansion of space, in the presence of density and spatial curvature gradients that grow large with the growth of structure. The phenomenology and observational tests of the timescape model are discussed in detail, with updated constraints from Planck satellite data. In addition, recent results on the variation of the Hubble expansion on < 100/h Mpc scales are discussed. The spherically averaged Hubble law is significantly more uniform in the rest frame of the Local Group of galaxies than in t...
Books average previous decade of economic misery.
Directory of Open Access Journals (Sweden)
R Alexander Bentley
Full Text Available For the 20(th century since the Depression, we find a strong correlation between a 'literary misery index' derived from English language books and a moving average of the previous decade of the annual U.S. economic misery index, which is the sum of inflation and unemployment rates. We find a peak in the goodness of fit at 11 years for the moving average. The fit between the two misery indices holds when using different techniques to measure the literary misery index, and this fit is significantly better than other possible correlations with different emotion indices. To check the robustness of the results, we also analysed books written in German language and obtained very similar correlations with the German economic misery index. The results suggest that millions of books published every year average the authors' shared economic experiences over the past decade.
Benchmarking statistical averaging of spectra with HULLAC
Klapisch, Marcel; Busquet, Michel
2008-11-01
Knowledge of radiative properties of hot plasmas is important for ICF, astrophysics, etc When mid-Z or high-Z elements are present, the spectra are so complex that one commonly uses statistically averaged description of atomic systems [1]. In a recent experiment on Fe[2], performed under controlled conditions, high resolution transmission spectra were obtained. The new version of HULLAC [3] allows the use of the same model with different levels of details/averaging. We will take advantage of this feature to check the effect of averaging with comparison with experiment. [1] A Bar-Shalom, J Oreg, and M Klapisch, J. Quant. Spectros. Rad. Transf. 65, 43 (2000). [2] J. E. Bailey, G. A. Rochau, C. A. Iglesias et al., Phys. Rev. Lett. 99, 265002-4 (2007). [3]. M. Klapisch, M. Busquet, and A. Bar-Shalom, AIP Conference Proceedings 926, 206-15 (2007).
Stochastic Averaging and Stochastic Extremum Seeking
Liu, Shu-Jun
2012-01-01
Stochastic Averaging and Stochastic Extremum Seeking develops methods of mathematical analysis inspired by the interest in reverse engineering and analysis of bacterial convergence by chemotaxis and to apply similar stochastic optimization techniques in other environments. The first half of the text presents significant advances in stochastic averaging theory, necessitated by the fact that existing theorems are restricted to systems with linear growth, globally exponentially stable average models, vanishing stochastic perturbations, and prevent analysis over infinite time horizon. The second half of the text introduces stochastic extremum seeking algorithms for model-free optimization of systems in real time using stochastic perturbations for estimation of their gradients. Both gradient- and Newton-based algorithms are presented, offering the user the choice between the simplicity of implementation (gradient) and the ability to achieve a known, arbitrary convergence rate (Newton). The design of algorithms...
Books average previous decade of economic misery.
Bentley, R Alexander; Acerbi, Alberto; Ormerod, Paul; Lampos, Vasileios
2014-01-01
For the 20(th) century since the Depression, we find a strong correlation between a 'literary misery index' derived from English language books and a moving average of the previous decade of the annual U.S. economic misery index, which is the sum of inflation and unemployment rates. We find a peak in the goodness of fit at 11 years for the moving average. The fit between the two misery indices holds when using different techniques to measure the literary misery index, and this fit is significantly better than other possible correlations with different emotion indices. To check the robustness of the results, we also analysed books written in German language and obtained very similar correlations with the German economic misery index. The results suggest that millions of books published every year average the authors' shared economic experiences over the past decade.
High Average Power Yb:YAG Laser
Energy Technology Data Exchange (ETDEWEB)
Zapata, L E; Beach, R J; Payne, S A
2001-05-23
We are working on a composite thin-disk laser design that can be scaled as a source of high brightness laser power for tactical engagement and other high average power applications. The key component is a diffusion-bonded composite comprising a thin gain-medium and thicker cladding that is strikingly robust and resolves prior difficulties with high average power pumping/cooling and the rejection of amplified spontaneous emission (ASE). In contrast to high power rods or slabs, the one-dimensional nature of the cooling geometry and the edge-pump geometry scale gracefully to very high average power. The crucial design ideas have been verified experimentally. Progress this last year included: extraction with high beam quality using a telescopic resonator, a heterogeneous thin film coating prescription that meets the unusual requirements demanded by this laser architecture, thermal management with our first generation cooler. Progress was also made in design of a second-generation laser.
The modulated average structure of mullite.
Birkenstock, Johannes; Petříček, Václav; Pedersen, Bjoern; Schneider, Hartmut; Fischer, Reinhard X
2015-06-01
Homogeneous and inclusion-free single crystals of 2:1 mullite (Al(4.8)Si(1.2)O(9.6)) grown by the Czochralski technique were examined by X-ray and neutron diffraction methods. The observed diffuse scattering together with the pattern of satellite reflections confirm previously published data and are thus inherent features of the mullite structure. The ideal composition was closely met as confirmed by microprobe analysis (Al(4.82 (3))Si(1.18 (1))O(9.59 (5))) and by average structure refinements. 8 (5) to 20 (13)% of the available Si was found in the T* position of the tetrahedra triclusters. The strong tendencey for disorder in mullite may be understood from considerations of hypothetical superstructures which would have to be n-fivefold with respect to the three-dimensional average unit cell of 2:1 mullite and n-fourfold in case of 3:2 mullite. In any of these the possible arrangements of the vacancies and of the tetrahedral units would inevitably be unfavorable. Three directions of incommensurate modulations were determined: q1 = [0.3137 (2) 0 ½], q2 = [0 0.4021 (5) 0.1834 (2)] and q3 = [0 0.4009 (5) -0.1834 (2)]. The one-dimensional incommensurately modulated crystal structure associated with q1 was refined for the first time using the superspace approach. The modulation is dominated by harmonic occupational modulations of the atoms in the di- and the triclusters of the tetrahedral units in mullite. The modulation amplitudes are small and the harmonic character implies that the modulated structure still represents an average structure in the overall disordered arrangement of the vacancies and of the tetrahedral structural units. In other words, when projecting the local assemblies at the scale of a few tens of average mullite cells into cells determined by either one of the modulation vectors q1, q2 or q3 a weak average modulation results with slightly varying average occupation factors for the tetrahedral units. As a result, the real
A singularity theorem based on spatial averages
Indian Academy of Sciences (India)
J M M Senovilla
2007-07-01
Inspired by Raychaudhuri's work, and using the equation named after him as a basic ingredient, a new singularity theorem is proved. Open non-rotating Universes, expanding everywhere with a non-vanishing spatial average of the matter variables, show severe geodesic incompletness in the past. Another way of stating the result is that, under the same conditions, any singularity-free model must have a vanishing spatial average of the energy density (and other physical variables). This is very satisfactory and provides a clear decisive difference between singular and non-singular cosmologies.
Average: the juxtaposition of procedure and context
Watson, Jane; Chick, Helen; Callingham, Rosemary
2014-09-01
This paper presents recent data on the performance of 247 middle school students on questions concerning average in three contexts. Analysis includes considering levels of understanding linking definition and context, performance across contexts, the relative difficulty of tasks, and difference in performance for male and female students. The outcomes lead to a discussion of the expectations of the curriculum and its implementation, as well as assessment, in relation to students' skills in carrying out procedures and their understanding about the meaning of average in context.
SOURCE TERMS FOR AVERAGE DOE SNF CANISTERS
Energy Technology Data Exchange (ETDEWEB)
K. L. Goluoglu
2000-06-09
The objective of this calculation is to generate source terms for each type of Department of Energy (DOE) spent nuclear fuel (SNF) canister that may be disposed of at the potential repository at Yucca Mountain. The scope of this calculation is limited to generating source terms for average DOE SNF canisters, and is not intended to be used for subsequent calculations requiring bounding source terms. This calculation is to be used in future Performance Assessment calculations, or other shielding or thermal calculations requiring average source terms.
An approximate analytical approach to resampling averages
DEFF Research Database (Denmark)
Malzahn, Dorthe; Opper, M.
2004-01-01
Using a novel reformulation, we develop a framework to compute approximate resampling data averages analytically. The method avoids multiple retraining of statistical models on the samples. Our approach uses a combination of the replica "trick" of statistical physics and the TAP approach for appr......Using a novel reformulation, we develop a framework to compute approximate resampling data averages analytically. The method avoids multiple retraining of statistical models on the samples. Our approach uses a combination of the replica "trick" of statistical physics and the TAP approach...
Grassmann Averages for Scalable Robust PCA
DEFF Research Database (Denmark)
Hauberg, Søren; Feragen, Aasa; Black, Michael J.
2014-01-01
As the collection of large datasets becomes increasingly automated, the occurrence of outliers will increase—“big data” implies “big outliers”. While principal component analysis (PCA) is often used to reduce the size of data, and scalable solutions exist, it is well-known that outliers can...... to vectors (subspaces) or elements of vectors; we focus on the latter and use a trimmed average. The resulting Trimmed Grassmann Average (TGA) is particularly appropriate for computer vision because it is robust to pixel outliers. The algorithm has low computational complexity and minimal memory requirements...
Li, Min; Zhou, Tong; Song, Yanan
2016-07-01
A grain size characterization method based on energy attenuation coefficient spectrum and support vector regression (SVR) is proposed. First, the spectra of the first and second back-wall echoes are cut into several frequency bands to calculate the energy attenuation coefficient spectrum. Second, the frequency band that is sensitive to grain size variation is determined. Finally, a statistical model between the energy attenuation coefficient in the sensitive frequency band and average grain size is established through SVR. Experimental verification is conducted on austenitic stainless steel. The average relative error of the predicted grain size is 5.65%, which is better than that of conventional methods.
Averaging processes in granular flows driven by gravity
Rossi, Giulia; Armanini, Aronne
2016-04-01
One of the more promising theoretical frames to analyse the two-phase granular flows is offered by the similarity of their rheology with the kinetic theory of gases [1]. Granular flows can be considered a macroscopic equivalent of the molecular case: the collisions among molecules are compared to the collisions among grains at a macroscopic scale [2,3]. However there are important statistical differences in dealing with the two applications. In the two-phase fluid mechanics, there are two main types of average: the phasic average and the mass weighed average [4]. The kinetic theories assume that the size of atoms is so small, that the number of molecules in a control volume is infinite. With this assumption, the concentration (number of particles n) doesn't change during the averaging process and the two definitions of average coincide. This hypothesis is no more true in granular flows: contrary to gases, the dimension of a single particle becomes comparable to that of the control volume. For this reason, in a single realization the number of grain is constant and the two averages coincide; on the contrary, for more than one realization, n is no more constant and the two types of average lead to different results. Therefore, the ensamble average used in the standard kinetic theory (which usually is the phasic average) is suitable for the single realization, but not for several realization, as already pointed out in [5,6]. In the literature, three main length scales have been identified [7]: the smallest is the particles size, the intermediate consists in the local averaging (in order to describe some instability phenomena or secondary circulation) and the largest arises from phenomena such as large eddies in turbulence. Our aim is to solve the intermediate scale, by applying the mass weighted average, when dealing with more than one realizations. This statistical approach leads to additional diffusive terms in the continuity equation: starting from experimental
A new methodology for determination of macroscopic transport parameters in drying porous media
Attari Moghaddam, A.; Kharaghani, A.; Tsotsas, E.; Prat, M.
2015-12-01
Two main approaches have been used to model the drying process: The first approach considers the partially saturated porous medium as a continuum and partial differential equations are used to describe the mass, momentum and energy balances of the fluid phases. The continuum-scale models (CM) obtained by this approach involve constitutive laws which require effective material properties, such as the diffusivity, permeability, and thermal conductivity which are often determined by experiments. The second approach considers the material at the pore scale, where the void space is represented by a network of pores (PN). Micro- or nanofluidics models used in each pore give rise to a large system of ordinary differential equations with degrees of freedom at each node of the pore network. In this work, the moisture transport coefficient (D), the pseudo desorption isotherm inside the network and at the evaporative surface are estimated from the post-processing of the three-dimensional pore network drying simulations for fifteen realizations of the pore space geometry from a given probability distribution. A slice sampling method is used in order to extract these parameters from PN simulations. The moisture transport coefficient obtained in this way is shown in Fig. 1a. The minimum of average D values demonstrates the transition between liquid dominated moisture transport region and vapor dominated moisture transport region; a similar behavior has been observed in previous experimental findings. A function is fitted to the average D values and then is fed into the non-linear moisture diffusion equation. The saturation profiles obtained from PN and CM simulations are shown in Fig. 1b. Figure 1: (a) extracted moisture transport coefficient during drying for fifteen realizations of the pore network, (b) average moisture profiles during drying obtained from PN and CM simulations.
Parameterized Traveling Salesman Problem: Beating the Average
Gutin, G.; Patel, V.
2016-01-01
In the traveling salesman problem (TSP), we are given a complete graph Kn together with an integer weighting w on the edges of Kn, and we are asked to find a Hamilton cycle of Kn of minimum weight. Let h(w) denote the average weight of a Hamilton cycle of Kn for the weighting w. Vizing in 1973 asked
On averaging methods for partial differential equations
Verhulst, F.
2001-01-01
The analysis of weakly nonlinear partial differential equations both qualitatively and quantitatively is emerging as an exciting eld of investigation In this report we consider specic results related to averaging but we do not aim at completeness The sections and contain important material which
Discontinuities and hysteresis in quantized average consensus
Ceragioli, Francesca; Persis, Claudio De; Frasca, Paolo
2011-01-01
We consider continuous-time average consensus dynamics in which the agents’ states are communicated through uniform quantizers. Solutions to the resulting system are defined in the Krasowskii sense and are proven to converge to conditions of ‘‘practical consensus’’. To cope with undesired chattering
Bayesian Averaging is Well-Temperated
DEFF Research Database (Denmark)
Hansen, Lars Kai
2000-01-01
Bayesian predictions are stochastic just like predictions of any other inference scheme that generalize from a finite sample. While a simple variational argument shows that Bayes averaging is generalization optimal given that the prior matches the teacher parameter distribution the situation...
A Functional Measurement Study on Averaging Numerosity
Tira, Michael D.; Tagliabue, Mariaelena; Vidotto, Giulio
2014-01-01
In two experiments, participants judged the average numerosity between two sequentially presented dot patterns to perform an approximate arithmetic task. In Experiment 1, the response was given on a 0-20 numerical scale (categorical scaling), and in Experiment 2, the response was given by the production of a dot pattern of the desired numerosity…
Generalized Jackknife Estimators of Weighted Average Derivatives
DEFF Research Database (Denmark)
Cattaneo, Matias D.; Crump, Richard K.; Jansson, Michael
With the aim of improving the quality of asymptotic distributional approximations for nonlinear functionals of nonparametric estimators, this paper revisits the large-sample properties of an important member of that class, namely a kernel-based weighted average derivative estimator. Asymptotic li...
Bootstrapping Density-Weighted Average Derivatives
DEFF Research Database (Denmark)
Cattaneo, Matias D.; Crump, Richard K.; Jansson, Michael
Employing the "small bandwidth" asymptotic framework of Cattaneo, Crump, and Jansson (2009), this paper studies the properties of a variety of bootstrap-based inference procedures associated with the kernel-based density-weighted averaged derivative estimator proposed by Powell, Stock, and Stoker...
Quantum Averaging of Squeezed States of Light
DEFF Research Database (Denmark)
Squeezing has been recognized as the main resource for quantum information processing and an important resource for beating classical detection strategies. It is therefore of high importance to reliably generate stable squeezing over longer periods of time. The averaging procedure for a single qu...
Bayesian Model Averaging for Propensity Score Analysis
Kaplan, David; Chen, Jianshen
2013-01-01
The purpose of this study is to explore Bayesian model averaging in the propensity score context. Previous research on Bayesian propensity score analysis does not take into account model uncertainty. In this regard, an internally consistent Bayesian framework for model building and estimation must also account for model uncertainty. The…
A dynamic analysis of moving average rules
Chiarella, C.; He, X.Z.; Hommes, C.H.
2006-01-01
The use of various moving average (MA) rules remains popular with financial market practitioners. These rules have recently become the focus of a number empirical studies, but there have been very few studies of financial market models where some agents employ technical trading rules of the type
Average utility maximization: A preference foundation
A.V. Kothiyal (Amit); V. Spinu (Vitalie); P.P. Wakker (Peter)
2014-01-01
textabstractThis paper provides necessary and sufficient preference conditions for average utility maximization over sequences of variable length. We obtain full generality by using a new algebraic technique that exploits the richness structure naturally provided by the variable length of the sequen
High average-power induction linacs
Energy Technology Data Exchange (ETDEWEB)
Prono, D.S.; Barrett, D.; Bowles, E.; Caporaso, G.J.; Chen, Yu-Jiuan; Clark, J.C.; Coffield, F.; Newton, M.A.; Nexsen, W.; Ravenscroft, D.
1989-03-15
Induction linear accelerators (LIAs) are inherently capable of accelerating several thousand amperes of /approximately/ 50-ns duration pulses to > 100 MeV. In this paper we report progress and status in the areas of duty factor and stray power management. These technologies are vital if LIAs are to attain high average power operation. 13 figs.
High Average Power Optical FEL Amplifiers
Ben-Zvi, I; Litvinenko, V
2005-01-01
Historically, the first demonstration of the FEL was in an amplifier configuration at Stanford University. There were other notable instances of amplifying a seed laser, such as the LLNL amplifier and the BNL ATF High-Gain Harmonic Generation FEL. However, for the most part FELs are operated as oscillators or self amplified spontaneous emission devices. Yet, in wavelength regimes where a conventional laser seed can be used, the FEL can be used as an amplifier. One promising application is for very high average power generation, for instance a 100 kW average power FEL. The high electron beam power, high brightness and high efficiency that can be achieved with photoinjectors and superconducting energy recovery linacs combine well with the high-gain FEL amplifier to produce unprecedented average power FELs with some advantages. In addition to the general features of the high average power FEL amplifier, we will look at a 100 kW class FEL amplifier is being designed to operate on the 0.5 ampere Energy Recovery Li...
Independence, Odd Girth, and Average Degree
DEFF Research Database (Denmark)
Löwenstein, Christian; Pedersen, Anders Sune; Rautenbach, Dieter;
2011-01-01
We prove several tight lower bounds in terms of the order and the average degree for the independence number of graphs that are connected and/or satisfy some odd girth condition. Our main result is the extension of a lower bound for the independence number of triangle-free graphs of maximum...
Full averaging of fuzzy impulsive differential inclusions
Directory of Open Access Journals (Sweden)
Natalia V. Skripnik
2010-09-01
Full Text Available In this paper the substantiation of the method of full averaging for fuzzy impulsive differential inclusions is studied. We extend the similar results for impulsive differential inclusions with Hukuhara derivative (Skripnik, 2007, for fuzzy impulsive differential equations (Plotnikov and Skripnik, 2009, and for fuzzy differential inclusions (Skripnik, 2009.
Materials for high average power lasers
Energy Technology Data Exchange (ETDEWEB)
Marion, J.E.; Pertica, A.J.
1989-01-01
Unique materials properties requirements for solid state high average power (HAP) lasers dictate a materials development research program. A review of the desirable laser, optical and thermo-mechanical properties for HAP lasers precedes an assessment of the development status for crystalline and glass hosts optimized for HAP lasers. 24 refs., 7 figs., 1 tab.
A dynamic analysis of moving average rules
C. Chiarella; X.Z. He; C.H. Hommes
2006-01-01
The use of various moving average (MA) rules remains popular with financial market practitioners. These rules have recently become the focus of a number empirical studies, but there have been very few studies of financial market models where some agents employ technical trading rules of the type use
A Course in Transport Phenomena in Multicomponent, Multiphase, Reacting Systems.
Carbonell, R. G.; Whitaker, S.
1978-01-01
This course concentrates on a rigorous development of the multicomponent transport equations, boundary conditions at phase interfaces, and volume-averaged transport equations for multiphase reacting systems. (BB)
Directory of Open Access Journals (Sweden)
A. M. Aibinu
2010-01-01
Full Text Available A new approach for determining the coefficients of a complex-valued autoregressive (CAR and complex-valued autoregressive moving average (CARMA model coefficients using complex-valued neural network (CVNN technique is discussed in this paper. The CAR and complex-valued moving average (CMA coefficients which constitute a CARMA model are computed simultaneously from the adaptive weights and coefficients of the linear activation functions in a two-layered CVNN. The performance of the proposed technique has been evaluated using simulated complex-valued data (CVD with three different types of activation functions. The results show that the proposed method can accurately determine the model coefficients provided that the network is properly trained. Furthermore, application of the developed CVNN-based technique for MRI K-space reconstruction results in images with improve resolution.
On Strong Convergence of Halpern’s Method Using Averaged Type Mappings
Directory of Open Access Journals (Sweden)
F. Cianciaruso
2014-01-01
Full Text Available Under suitable hypotheses on control coefficients, we study Halpern’s method to approximate strongly common fixed points of a nonexpansive mapping and of a nonspreading mapping or a fixed point of one of them. A crucial tool in our results is the regularization with the averaged type mappings.
Energy Technology Data Exchange (ETDEWEB)
Kicken, P.J.H.; Zankl, M.; Kemerink, G.J
1999-07-01
X ray projection data (see Part I) and GSF phantoms ADAM and EVA were used as input for the GSF Monte Carlo transport code to calculate hitherto unavailable dose conversion coefficients (DCCs) for common projections in arteriography of the lower limbs. These DCCs served to estimate organ equivalent doses and effective dose in a study of 455 patients. The effective dose caused by percutaneous needle puncture arteriography of one leg was on average 1 mSv, by Seldinger catherisation for arteriography of both legs 4 mSv, and by intravenous digital subtraction arteriography (DSA) 5 mSv. For needle puncture and Seldinger arteriography the effective dose attributable to fluoroscopy was about 50% for male and 60% for female patients. The contribution of DSA was between 15 and 35%, that of cut films between 17 to 28%, depending on gender and procedure. The effective dose in intravenous arteriography was mainly due to DSA (91-93%). (author)
Averaging and renormalization for the Korteveg–deVries–Burgers equation
Chorin, Alexandre J.
2003-01-01
We consider traveling wave solutions of the Korteveg–deVries–Burgers equation and set up an analogy between the spatial averaging of these traveling waves and real-space renormalization for Hamiltonian systems. The result is an effective equation that reproduces means of the unaveraged, highly oscillatory, solution. The averaging enhances the apparent diffusion, creating an “eddy” (or renormalized) diffusion coefficient; the relation between the eddy diffusion coefficient and the original diffusion coefficient is found numerically to be one of incomplete similarity, setting up an instance of Barenblatt's renormalization group. The results suggest a relation between self-similar solutions of differential equations on one hand and renormalization groups and optimal prediction algorithms on the other. An analogy with hydrodynamics is pointed out. PMID:12913126
Averaging and renormalization for the Korteveg-deVries-Burgers equation.
Chorin, Alexandre J
2003-08-19
We consider traveling wave solutions of the Korteveg-deVries-Burgers equation and set up an analogy between the spatial averaging of these traveling waves and real-space renormalization for Hamiltonian systems. The result is an effective equation that reproduces means of the unaveraged, highly oscillatory, solution. The averaging enhances the apparent diffusion, creating an "eddy" (or renormalized) diffusion coefficient; the relation between the eddy diffusion coefficient and the original diffusion coefficient is found numerically to be one of incomplete similarity, setting up an instance of Barenblatt's renormalization group. The results suggest a relation between self-similar solutions of differential equations on one hand and renormalization groups and optimal prediction algorithms on the other. An analogy with hydrodynamics is pointed out.
Credal Classification based on AODE and compression coefficients
Corani, Giorgio
2012-01-01
Bayesian model averaging (BMA) is an approach to average over alternative models; yet, it usually gets excessively concentrated around the single most probable model, therefore achieving only sub-optimal classification performance. The compression-based approach (Boulle, 2007) overcomes this problem, averaging over the different models by applying a logarithmic smoothing over the models' posterior probabilities. This approach has shown excellent performances when applied to ensembles of naive Bayes classifiers. AODE is another ensemble of models with high performance (Webb, 2005), based on a collection of non-naive classifiers (called SPODE) whose probabilistic predictions are aggregated by simple arithmetic mean. Aggregating the SPODEs via BMA rather than by arithmetic mean deteriorates the performance; instead, we aggregate the SPODEs via the compression coefficients and we show that the resulting classifier obtains a slight but consistent improvement over AODE. However, an important issue in any Bayesian e...
Energy Technology Data Exchange (ETDEWEB)
Choi, Dong jae; Jang, Yeong jun; Lee, Yeon-Gun [Jeju National University, Jeju (Korea, Republic of); Kim, Sin [Chung-Ang University, Seoul (Korea, Republic of)
2015-10-15
The Passive Containment Cooling System (PCCS) to be introduced in advanced LWRs removes released energy to an external heat sink by a naturally driven flow. Containment through the condensation heat transfer phenomenon in the event of the loss of coolant accident (LOCA) or main steam line break (MSLB). As the released steam pressurizes the containment, the PCCS will activate to transport the decay heat In this study, a numerical analysis of the condensation heat transfer coefficients on the PCCS condenser tube is conducted using the MARS-KS code. The condensation heat transfer coefficients are obtained from JNU condensation tests performed on a 1000 long and 40 mm O.D. tube. The analysis condition covers 2 and 4 bar for the air mass fraction ranging from 0.1 to 0.8. The JNU single vertical condensation experimental results, Uchida's and Dehbi's correlation compared with the MARS-KS code's results at 2 and 4 bar. Experimental results and MARS-KS predicted heat transfer coefficient is different from the thermal resistances and Wall subcooling. An average relative error is 18.8% and 15% at 2 and 4 bar, respectively. Uchida's correlation is considered the noncondensable gas mass fraction only. Therefore, that is lower than MARS-KS results at 4 bar. Dehbi's correlation affected by ratio of the height-to-diameter, so its results are higher condensation heat transfer coefficient than MARS-KS predicted results.
Predictive RANS simulations via Bayesian Model-Scenario Averaging
Edeling, W. N.; Cinnella, P.; Dwight, R. P.
2014-10-01
The turbulence closure model is the dominant source of error in most Reynolds-Averaged Navier-Stokes simulations, yet no reliable estimators for this error component currently exist. Here we develop a stochastic, a posteriori error estimate, calibrated to specific classes of flow. It is based on variability in model closure coefficients across multiple flow scenarios, for multiple closure models. The variability is estimated using Bayesian calibration against experimental data for each scenario, and Bayesian Model-Scenario Averaging (BMSA) is used to collate the resulting posteriors, to obtain a stochastic estimate of a Quantity of Interest (QoI) in an unmeasured (prediction) scenario. The scenario probabilities in BMSA are chosen using a sensor which automatically weights those scenarios in the calibration set which are similar to the prediction scenario. The methodology is applied to the class of turbulent boundary-layers subject to various pressure gradients. For all considered prediction scenarios the standard-deviation of the stochastic estimate is consistent with the measurement ground truth. Furthermore, the mean of the estimate is more consistently accurate than the individual model predictions.
Predictive RANS simulations via Bayesian Model-Scenario Averaging
Energy Technology Data Exchange (ETDEWEB)
Edeling, W.N., E-mail: W.N.Edeling@tudelft.nl [Arts et Métiers ParisTech, DynFluid laboratory, 151 Boulevard de l' Hospital, 75013 Paris (France); Delft University of Technology, Faculty of Aerospace Engineering, Kluyverweg 2, Delft (Netherlands); Cinnella, P., E-mail: P.Cinnella@ensam.eu [Arts et Métiers ParisTech, DynFluid laboratory, 151 Boulevard de l' Hospital, 75013 Paris (France); Dwight, R.P., E-mail: R.P.Dwight@tudelft.nl [Delft University of Technology, Faculty of Aerospace Engineering, Kluyverweg 2, Delft (Netherlands)
2014-10-15
The turbulence closure model is the dominant source of error in most Reynolds-Averaged Navier–Stokes simulations, yet no reliable estimators for this error component currently exist. Here we develop a stochastic, a posteriori error estimate, calibrated to specific classes of flow. It is based on variability in model closure coefficients across multiple flow scenarios, for multiple closure models. The variability is estimated using Bayesian calibration against experimental data for each scenario, and Bayesian Model-Scenario Averaging (BMSA) is used to collate the resulting posteriors, to obtain a stochastic estimate of a Quantity of Interest (QoI) in an unmeasured (prediction) scenario. The scenario probabilities in BMSA are chosen using a sensor which automatically weights those scenarios in the calibration set which are similar to the prediction scenario. The methodology is applied to the class of turbulent boundary-layers subject to various pressure gradients. For all considered prediction scenarios the standard-deviation of the stochastic estimate is consistent with the measurement ground truth. Furthermore, the mean of the estimate is more consistently accurate than the individual model predictions.
A high average power electro-optic switch using KTP
Energy Technology Data Exchange (ETDEWEB)
Ebbers, C.A.; Cook, W.M.; Velsko, S.P.
1994-04-01
High damage threshold, high thermal conductivity, and small thermo-optic coefficients make KTiOPO{sub 4} (KTP) an attractive material for use in a high average power Q-switch. However, electro-chromic damage and refractive index homogeneity have prevented the utilization of KTP in such a device in the past. This work shows that electro-chromic damage is effectively suppressed using capacitive coupling, and a KTP crystal can be Q-switched for 1.5 {times} 10{sup 9} shots without any detectable electro-chromic damage. In addition, KTP with the high uniformity and large aperture size needed for a KTP electro-optic Q-switch can be obtained from flux crystals grown at constant temperature. A thermally compensated, dual crystal KTP Q-switch, which successfully produced 50 mJ pulses with a pulse width of 8 ns (FWHM), has been constructed. In addition, in off-line testing the Q-switch showed less than 7% depolarization at an average power loading of 3.2 kW/cm{sup 2}.
Average density and porosity of high-strength lightweight concrete
Directory of Open Access Journals (Sweden)
A.S. Inozemtcev
2014-11-01
Full Text Available The analysis results of high-strength lightweight concrete (HSLWC structure are presented in this paper. The X-ray tomography, optical microscopy and other methods are used for researching of average density and porosity. It has been revealed that mixtures of HSLWC with density 1300…1500 kg/m3 have a homogeneous structure. The developed concrete has a uniform distribution of the hollow filler and a uniform layer of cement-mineral matrix. The highly saturated gas phase which is divided by denser large particles of quartz sand and products of cement hydration in the contact area allow forming a composite material with low average density, big porosity (up to 40% and high strength (compressive strength is more than 40 MPa. Special modifiers increase adhesion, compacts structure in the contact area, decrease water absorption of high-strength lightweight concrete (up to 1 % and ensure its high water resistance (water resistance coefficient is more than 0.95.
Averaged Extended Tree Augmented Naive Classifier
Directory of Open Access Journals (Sweden)
Aaron Meehan
2015-07-01
Full Text Available This work presents a new general purpose classifier named Averaged Extended Tree Augmented Naive Bayes (AETAN, which is based on combining the advantageous characteristics of Extended Tree Augmented Naive Bayes (ETAN and Averaged One-Dependence Estimator (AODE classifiers. We describe the main properties of the approach and algorithms for learning it, along with an analysis of its computational time complexity. Empirical results with numerous data sets indicate that the new approach is superior to ETAN and AODE in terms of both zero-one classification accuracy and log loss. It also compares favourably against weighted AODE and hidden Naive Bayes. The learning phase of the new approach is slower than that of its competitors, while the time complexity for the testing phase is similar. Such characteristics suggest that the new classifier is ideal in scenarios where online learning is not required.
Trajectory averaging for stochastic approximation MCMC algorithms
Liang, Faming
2010-01-01
The subject of stochastic approximation was founded by Robbins and Monro [Ann. Math. Statist. 22 (1951) 400--407]. After five decades of continual development, it has developed into an important area in systems control and optimization, and it has also served as a prototype for the development of adaptive algorithms for on-line estimation and control of stochastic systems. Recently, it has been used in statistics with Markov chain Monte Carlo for solving maximum likelihood estimation problems and for general simulation and optimizations. In this paper, we first show that the trajectory averaging estimator is asymptotically efficient for the stochastic approximation MCMC (SAMCMC) algorithm under mild conditions, and then apply this result to the stochastic approximation Monte Carlo algorithm [Liang, Liu and Carroll J. Amer. Statist. Assoc. 102 (2007) 305--320]. The application of the trajectory averaging estimator to other stochastic approximation MCMC algorithms, for example, a stochastic approximation MLE al...
ANALYSIS OF THE FACTORS AFFECTING THE AVERAGE
Directory of Open Access Journals (Sweden)
Carmen BOGHEAN
2013-12-01
Full Text Available Productivity in agriculture most relevantly and concisely expresses the economic efficiency of using the factors of production. Labour productivity is affected by a considerable number of variables (including the relationship system and interdependence between factors, which differ in each economic sector and influence it, giving rise to a series of technical, economic and organizational idiosyncrasies. The purpose of this paper is to analyse the underlying factors of the average work productivity in agriculture, forestry and fishing. The analysis will take into account the data concerning the economically active population and the gross added value in agriculture, forestry and fishing in Romania during 2008-2011. The distribution of the average work productivity per factors affecting it is conducted by means of the u-substitution method.
Time-average dynamic speckle interferometry
Vladimirov, A. P.
2014-05-01
For the study of microscopic processes occurring at structural level in solids and thin biological objects, a method of dynamic speckle interferometry successfully applied. However, the method has disadvantages. The purpose of the report is to acquaint colleagues with the method of averaging in time in dynamic speckle - interferometry of microscopic processes, allowing eliminating shortcomings. The main idea of the method is the choice the averaging time, which exceeds the characteristic time correlation (relaxation) the most rapid process. The method theory for a thin phase and the reflecting object is given. The results of the experiment on the high-cycle fatigue of steel and experiment to estimate the biological activity of a monolayer of cells, cultivated on a transparent substrate is given. It is shown that the method allows real-time visualize the accumulation of fatigue damages and reliably estimate the activity of cells with viruses and without viruses.
Directory of Open Access Journals (Sweden)
Shirmohammadi Adel
2006-10-01
Full Text Available Abstract Background Quantification of in-vivo biomolecule mass transport and reaction rate parameters from experimental data obtained by Fluorescence Recovery after Photobleaching (FRAP is becoming more important. Methods and results The Osborne-Moré extended version of the Levenberg-Marquardt optimization algorithm was coupled with the experimental data obtained by the Fluorescence Recovery after Photobleaching (FRAP protocol, and the numerical solution of a set of two partial differential equations governing macromolecule mass transport and reaction in living cells, to inversely estimate optimized values of the molecular diffusion coefficient and binding rate parameters of GFP-tagged glucocorticoid receptor. The results indicate that the FRAP protocol provides enough information to estimate one parameter uniquely using a nonlinear optimization technique. Coupling FRAP experimental data with the inverse modeling strategy, one can also uniquely estimate the individual values of the binding rate coefficients if the molecular diffusion coefficient is known. One can also simultaneously estimate the dissociation rate parameter and molecular diffusion coefficient given the pseudo-association rate parameter is known. However, the protocol provides insufficient information for unique simultaneous estimation of three parameters (diffusion coefficient and binding rate parameters owing to the high intercorrelation between the molecular diffusion coefficient and pseudo-association rate parameter. Attempts to estimate macromolecule mass transport and binding rate parameters simultaneously from FRAP data result in misleading conclusions regarding concentrations of free macromolecule and bound complex inside the cell, average binding time per vacant site, average time for diffusion of macromolecules from one site to the next, and slow or rapid mobility of biomolecules in cells. Conclusion To obtain unique values for molecular diffusion coefficient and
Average Annual Rainfall over the Globe
Agrawal, D. C.
2013-01-01
The atmospheric recycling of water is a very important phenomenon on the globe because it not only refreshes the water but it also redistributes it over land and oceans/rivers/lakes throughout the globe. This is made possible by the solar energy intercepted by the Earth. The half of the globe facing the Sun, on the average, intercepts 1.74 ×…
Endogenous average cost based access pricing
Fjell, Kenneth; Foros, Øystein; Pal, Debashis
2006-01-01
We consider an industry where a downstream competitor requires access to an upstream facility controlled by a vertically integrated and regulated incumbent. The literature on access pricing assumes the access price to be exogenously fixed ex-ante. We analyze an endogenous average cost based access pricing rule, where both firms realize the interdependence among their quantities and the regulated access price. Endogenous access pricing neutralizes the artificial cost advantag...
The Ghirlanda-Guerra identities without averaging
Chatterjee, Sourav
2009-01-01
The Ghirlanda-Guerra identities are one of the most mysterious features of spin glasses. We prove the GG identities in a large class of models that includes the Edwards-Anderson model, the random field Ising model, and the Sherrington-Kirkpatrick model in the presence of a random external field. Previously, the GG identities were rigorously proved only `on average' over a range of temperatures or under small perturbations.
Average Annual Rainfall over the Globe
Agrawal, D. C.
2013-01-01
The atmospheric recycling of water is a very important phenomenon on the globe because it not only refreshes the water but it also redistributes it over land and oceans/rivers/lakes throughout the globe. This is made possible by the solar energy intercepted by the Earth. The half of the globe facing the Sun, on the average, intercepts 1.74 ×…
Average Light Intensity Inside a Photobioreactor
Directory of Open Access Journals (Sweden)
Herby Jean
2011-01-01
Full Text Available For energy production, microalgae are one of the few alternatives with high potential. Similar to plants, algae require energy acquired from light sources to grow. This project uses calculus to determine the light intensity inside of a photobioreactor filled with algae. Under preset conditions along with estimated values, we applied Lambert-Beer's law to formulate an equation to calculate how much light intensity escapes a photobioreactor and determine the average light intensity that was present inside the reactor.
Geomagnetic effects on the average surface temperature
Ballatore, P.
Several results have previously shown as the solar activity can be related to the cloudiness and the surface solar radiation intensity (Svensmark and Friis-Christensen, J. Atmos. Sol. Terr. Phys., 59, 1225, 1997; Veretenenkoand Pudovkin, J. Atmos. Sol. Terr. Phys., 61, 521, 1999). Here, the possible relationships between the averaged surface temperature and the solar wind parameters or geomagnetic activity indices are investigated. The temperature data used are the monthly SST maps (generated at RAL and available from the related ESRIN/ESA database) that represent the averaged surface temperature with a spatial resolution of 0.5°x0.5° and cover the entire globe. The interplanetary data and the geomagnetic data are from the USA National Space Science Data Center. The time interval considered is 1995-2000. Specifically, possible associations and/or correlations of the average temperature with the interplanetary magnetic field Bz component and with the Kp index are considered and differentiated taking into account separate geographic and geomagnetic planetary regions.
Unscrambling The "Average User" Of Habbo Hotel
Directory of Open Access Journals (Sweden)
Mikael Johnson
2007-01-01
Full Text Available The “user” is an ambiguous concept in human-computer interaction and information systems. Analyses of users as social actors, participants, or configured users delineate approaches to studying design-use relationships. Here, a developer’s reference to a figure of speech, termed the “average user,” is contrasted with design guidelines. The aim is to create an understanding about categorization practices in design through a case study about the virtual community, Habbo Hotel. A qualitative analysis highlighted not only the meaning of the “average user,” but also the work that both the developer and the category contribute to this meaning. The average user a represents the unknown, b influences the boundaries of the target user groups, c legitimizes the designer to disregard marginal user feedback, and d keeps the design space open, thus allowing for creativity. The analysis shows how design and use are intertwined and highlights the developers’ role in governing different users’ interests.
On Backus average for generally anisotropic layers
Bos, Len; Slawinski, Michael A; Stanoev, Theodore
2016-01-01
In this paper, following the Backus (1962) approach, we examine expressions for elasticity parameters of a homogeneous generally anisotropic medium that is long-wave-equivalent to a stack of thin generally anisotropic layers. These expressions reduce to the results of Backus (1962) for the case of isotropic and transversely isotropic layers. In over half-a-century since the publications of Backus (1962) there have been numerous publications applying and extending that formulation. However, neither George Backus nor the authors of the present paper are aware of further examinations of mathematical underpinnings of the original formulation; hence, this paper. We prove that---within the long-wave approximation---if the thin layers obey stability conditions then so does the equivalent medium. We examine---within the Backus-average context---the approximation of the average of a product as the product of averages, and express it as a proposition in terms of an upper bound. In the presented examination we use the e...
A simple algorithm for averaging spike trains.
Julienne, Hannah; Houghton, Conor
2013-02-25
Although spike trains are the principal channel of communication between neurons, a single stimulus will elicit different spike trains from trial to trial. This variability, in both spike timings and spike number can obscure the temporal structure of spike trains and often means that computations need to be run on numerous spike trains in order to extract features common across all the responses to a particular stimulus. This can increase the computational burden and obscure analytical results. As a consequence, it is useful to consider how to calculate a central spike train that summarizes a set of trials. Indeed, averaging responses over trials is routine for other signal types. Here, a simple method for finding a central spike train is described. The spike trains are first mapped to functions, these functions are averaged, and a greedy algorithm is then used to map the average function back to a spike train. The central spike trains are tested for a large data set. Their performance on a classification-based test is considerably better than the performance of the medoid spike trains.
Changing mortality and average cohort life expectancy
Directory of Open Access Journals (Sweden)
Robert Schoen
2005-10-01
Full Text Available Period life expectancy varies with changes in mortality, and should not be confused with the life expectancy of those alive during that period. Given past and likely future mortality changes, a recent debate has arisen on the usefulness of the period life expectancy as the leading measure of survivorship. An alternative aggregate measure of period mortality which has been seen as less sensitive to period changes, the cross-sectional average length of life (CAL has been proposed as an alternative, but has received only limited empirical or analytical examination. Here, we introduce a new measure, the average cohort life expectancy (ACLE, to provide a precise measure of the average length of life of cohorts alive at a given time. To compare the performance of ACLE with CAL and with period and cohort life expectancy, we first use population models with changing mortality. Then the four aggregate measures of mortality are calculated for England and Wales, Norway, and Switzerland for the years 1880 to 2000. CAL is found to be sensitive to past and present changes in death rates. ACLE requires the most data, but gives the best representation of the survivorship of cohorts present at a given time.
Disk-averaged synthetic spectra of Mars
Tinetti, Giovanna; Meadows, Victoria S.; Crisp, David; Fong, William; Velusamy, Thangasamy; Snively, Heather
2005-01-01
The principal goal of the NASA Terrestrial Planet Finder (TPF) and European Space Agency's Darwin mission concepts is to directly detect and characterize extrasolar terrestrial (Earthsized) planets. This first generation of instruments is expected to provide disk-averaged spectra with modest spectral resolution and signal-to-noise. Here we use a spatially and spectrally resolved model of a Mars-like planet to study the detectability of a planet's surface and atmospheric properties from disk-averaged spectra. We explore the detectability as a function of spectral resolution and wavelength range, for both the proposed visible coronograph (TPFC) and mid-infrared interferometer (TPF-I/Darwin) architectures. At the core of our model is a spectrum-resolving (line-by-line) atmospheric/surface radiative transfer model. This model uses observational data as input to generate a database of spatially resolved synthetic spectra for a range of illumination conditions and viewing geometries. The model was validated against spectra recorded by the Mars Global Surveyor-Thermal Emission Spectrometer and the Mariner 9-Infrared Interferometer Spectrometer. Results presented here include disk-averaged synthetic spectra, light curves, and the spectral variability at visible and mid-infrared wavelengths for Mars as a function of viewing angle, illumination, and season. We also considered the differences in the spectral appearance of an increasingly ice-covered Mars, as a function of spectral resolution, signal-to-noise and integration time for both TPF-C and TPFI/ Darwin.
Spatial averaging infiltration model for layered soil
Institute of Scientific and Technical Information of China (English)
HU HePing; YANG ZhiYong; TIAN FuQiang
2009-01-01
To quantify the influences of soil heterogeneity on infiltration, a spatial averaging infiltration model for layered soil (SAI model) is developed by coupling the spatial averaging approach proposed by Chen et al. and the Generalized Green-Ampt model proposed by Jia et al. In the SAI model, the spatial heterogeneity along the horizontal direction is described by a probability distribution function, while that along the vertical direction is represented by the layered soils. The SAI model is tested on a typical soil using Monte Carlo simulations as the base model. The results show that the SAI model can directly incorporate the influence of spatial heterogeneity on infiltration on the macro scale. It is also found that the homogeneous assumption of soil hydraulic conductivity along the horizontal direction will overestimate the infiltration rate, while that along the vertical direction will underestimate the infiltration rate significantly during rainstorm periods. The SAI model is adopted in the spatial averaging hydrological model developed by the authors, and the results prove that it can be applied in the macro-scale hydrological and land surface process modeling in a promising way.
Spatial averaging infiltration model for layered soil
Institute of Scientific and Technical Information of China (English)
无
2009-01-01
To quantify the influences of soil heterogeneity on infiltration, a spatial averaging infiltration model for layered soil (SAI model) is developed by coupling the spatial averaging approach proposed by Chen et al. and the Generalized Green-Ampt model proposed by Jia et al. In the SAI model, the spatial hetero- geneity along the horizontal direction is described by a probability distribution function, while that along the vertical direction is represented by the layered soils. The SAI model is tested on a typical soil using Monte Carlo simulations as the base model. The results show that the SAI model can directly incorporate the influence of spatial heterogeneity on infiltration on the macro scale. It is also found that the homogeneous assumption of soil hydraulic conductivity along the horizontal direction will overes- timate the infiltration rate, while that along the vertical direction will underestimate the infiltration rate significantly during rainstorm periods. The SAI model is adopted in the spatial averaging hydrological model developed by the authors, and the results prove that it can be applied in the macro-scale hy- drological and land surface process modeling in a promising way.
Disk-averaged synthetic spectra of Mars
Tinetti, G; Fong, W; Meadows, V S; Snively, H; Velusamy, T; Crisp, David; Fong, William; Meadows, Victoria S.; Snively, Heather; Tinetti, Giovanna; Velusamy, Thangasamy
2004-01-01
The principal goal of the NASA Terrestrial Planet Finder (TPF) and ESA Darwin mission concepts is to directly detect and characterize extrasolar terrestrial (Earth-sized) planets. This first generation of instruments is expected to provide disk-averaged spectra with modest spectral resolution and signal-to-noise. Here we use a spatially and spectrally resolved model of the planet Mars to study the detectability of a planet's surface and atmospheric properties from disk-averaged spectra as a function of spectral resolution and wavelength range, for both the proposed visible coronograph (TPF-C) and mid-infrared interferometer (TPF-I/Darwin) architectures. At the core of our model is a spectrum-resolving (line-by-line) atmospheric/surface radiative transfer model which uses observational data as input to generate a database of spatially-resolved synthetic spectra for a range of illumination conditions (phase angles) and viewing geometries. Results presented here include disk averaged synthetic spectra, light-cur...
Disk-averaged synthetic spectra of Mars
Tinetti, Giovanna; Meadows, Victoria S.; Crisp, David; Fong, William; Velusamy, Thangasamy; Snively, Heather
2005-01-01
The principal goal of the NASA Terrestrial Planet Finder (TPF) and European Space Agency's Darwin mission concepts is to directly detect and characterize extrasolar terrestrial (Earthsized) planets. This first generation of instruments is expected to provide disk-averaged spectra with modest spectral resolution and signal-to-noise. Here we use a spatially and spectrally resolved model of a Mars-like planet to study the detectability of a planet's surface and atmospheric properties from disk-averaged spectra. We explore the detectability as a function of spectral resolution and wavelength range, for both the proposed visible coronograph (TPFC) and mid-infrared interferometer (TPF-I/Darwin) architectures. At the core of our model is a spectrum-resolving (line-by-line) atmospheric/surface radiative transfer model. This model uses observational data as input to generate a database of spatially resolved synthetic spectra for a range of illumination conditions and viewing geometries. The model was validated against spectra recorded by the Mars Global Surveyor-Thermal Emission Spectrometer and the Mariner 9-Infrared Interferometer Spectrometer. Results presented here include disk-averaged synthetic spectra, light curves, and the spectral variability at visible and mid-infrared wavelengths for Mars as a function of viewing angle, illumination, and season. We also considered the differences in the spectral appearance of an increasingly ice-covered Mars, as a function of spectral resolution, signal-to-noise and integration time for both TPF-C and TPFI/ Darwin.
Osmotic water transport in aquaporins
DEFF Research Database (Denmark)
Zeuthen, Thomas; Alsterfjord, Magnus; Beitz, Eric
2013-01-01
Abstract We test a novel, stochastic model of osmotic water transport in aquaporins. A solute molecule present at the pore mouth can either be reflected or permeate the pore. We assume that only reflected solute molecules induce osmotic transport of water through the pore, while permeating solute...... sizes and geometries were obtained with the two aquaporins AQP1 and AQP9 and mutant versions of these. Osmotic water transport was generated by adding 20 mM of a range of different-sized osmolytes to the outer solution. The osmotic water permeability and the reflection coefficient were measured...... molecules give rise to no water transport. Accordingly, the rate of water transport is proportional to the reflection coefficient σ, while the solute permeability, P(S), is proportional to 1 - σ. The model was tested in aquaporins heterologously expressed in Xenopus oocytes. A variety of aquaporin channel...
Yan, Jiawei; Ke, Youqi
2016-07-01
Electron transport properties of nanoelectronics can be significantly influenced by the inevitable and randomly distributed impurities/defects. For theoretical simulation of disordered nanoscale electronics, one is interested in both the configurationally averaged transport property and its statistical fluctuation that tells device-to-device variability induced by disorder. However, due to the lack of an effective method to do disorder averaging under the nonequilibrium condition, the important effects of disorders on electron transport remain largely unexplored or poorly understood. In this work, we report a general formalism of Green's function based nonequilibrium effective medium theory to calculate the disordered nanoelectronics. In this method, based on a generalized coherent potential approximation for the Keldysh nonequilibrium Green's function, we developed a generalized nonequilibrium vertex correction method to calculate the average of a two-Keldysh-Green's-function correlator. We obtain nine nonequilibrium vertex correction terms, as a complete family, to express the average of any two-Green's-function correlator and find they can be solved by a set of linear equations. As an important result, the averaged nonequilibrium density matrix, averaged current, disorder-induced current fluctuation, and averaged shot noise, which involve different two-Green's-function correlators, can all be derived and computed in an effective and unified way. To test the general applicability of this method, we applied it to compute the transmission coefficient and its fluctuation with a square-lattice tight-binding model and compared with the exact results and other previously proposed approximations. Our results show very good agreement with the exact results for a wide range of disorder concentrations and energies. In addition, to incorporate with density functional theory to realize first-principles quantum transport simulation, we have also derived a general form of
Analytical expressions for maximum wind turbine average power in a Rayleigh wind regime
Energy Technology Data Exchange (ETDEWEB)
Carlin, P.W.
1996-12-01
Average or expectation values for annual power of a wind turbine in a Rayleigh wind regime are calculated and plotted as a function of cut-out wind speed. This wind speed is expressed in multiples of the annual average wind speed at the turbine installation site. To provide a common basis for comparison of all real and imagined turbines, the Rayleigh-Betz wind machine is postulated. This machine is an ideal wind machine operating with the ideal Betz power coefficient of 0.593 in a Rayleigh probability wind regime. All other average annual powers are expressed in fractions of that power. Cases considered include: (1) an ideal machine with finite power and finite cutout speed, (2) real machines operating in variable speed mode at their maximum power coefficient, and (3) real machines operating at constant speed.
Mass transfer coefficients determination from linear gradient elution experiments.
Pfister, David; Morbidelli, Massimo
2015-01-02
A procedure to estimate mass transfer coefficients in linear gradient elution chromatography is presented and validated by comparison with experimental data. Mass transfer coefficients are traditionally estimated experimentally through the van Deemter plot, which represents the HETP as a function of the fluid velocity. Up to now, the HETP was obtained under isocratic elution conditions. Unfortunately, isocratic elution experiments are often not suitable for large biomolecules which suffer from severe mass transfer hindrances. Yamamoto et al. were the first to propose a semi-empirical equation to relate HETPs measured from linear gradient elution experiments to those obtained under isocratic conditions [7]. Based on his pioneering work, the approach presented in this work aims at providing an experimental procedure supported by simple equations to estimate reliable mass transfer parameters from linear gradient elution chromatographic experiments. From the resolution of the transport model, we derived a rigorous analytical expression for the HETP in linear gradient elution chromatography.
Net Emission Coefficients for Copper and Iron Plasmas
Kassubek, Frank; Zilberberg, Oded; Doiron, Charles
2016-09-01
Radiative heat transfer is an important mechanism for heat transport in electrical arcs, e.g. in electrical switchgear. An exact description of this phenomenon is important (i) for the energy balance of the arc itself, and (ii) for the estimate of the escaping radiation that leads to evaporation of polymer nozzles; the evaporated material and its flow have a strong effect on the arcs. For low voltage arcs, the plasma composition within the arc is dominated by the contact material. In the present study, we compare copper and iron. Especially, we discuss the calculation of absorption and emission spectra and their characterisation by net emission coefficients. The latter describe well the effective power balance at the centre of the arc. We show that in addition to the net emission coefficients, it is important to characterise the radiation that is emitted from the arc core.
Pressure drop coefficient of laminar Newtonian flow in axisymmetric diffusers
Energy Technology Data Exchange (ETDEWEB)
Rosa, S. [Escola Superior de Tecnologia e Gestao, Instituto Politecnico, Campus de Santa Apolonia, 5301-857 Braganca (Portugal)]. E-mail: srosa@ipb.pt; Pinho, F.T. [Centro de Estudos de Fenomenos de Transporte, DEM, Universidade do Minho, Campus de Azurem, 4800-058 Guimaraes (Portugal)]. E-mail: fpinho@fe.up.pt
2006-04-15
The laminar flow of Newtonian fluids in axisymmetric diffusers has been numerically investigated to evaluate the pressure-loss coefficient as a function of Reynolds number, diffusion angle and expansion ratio. The numerical simulations were carried out with a finite-volume based code using non-orthogonal collocated grids and second order accurate differencing schemes to discretize all terms of the transport equations. The calculations were carried out for Reynolds numbers between 2 and 200, diffusion angles from 0 deg. to 90 deg. and expansion ratios of 1.5 and 2 and the data are presented in tabular form and as correlations. A simplified 1D theoretical analysis helped explain the various contributions to the loss coefficient and its difference relative to the reversible pressure variation due to differences between the actual and fully developed friction losses, distortions of the velocity profiles and pressure non-uniformity upstream and downstream of the expansion section.
INVERSE COEFFICIENT PROBLEMS FOR PARABOLIC HEMIVARIATIONAL INEQUALITIES
Institute of Scientific and Technical Information of China (English)
Liu Zhenhai; I.Szántó
2011-01-01
This paper is devoted to the class of inverse problems for a nonlinear parabolic hemivariational inequality.The unknown coefficient of the operator depends on the gradient of the solution and belongs to a set of admissible coefficients.It is proved that the convergence of solutions for the corresponding direct problems continuously depends on the coefficient convergence.Based on this result the existence of a quasisolution of the inverse problem is obtained.
Gamma ray attenuation coefficient measurement for neutron-absorbent materials
Energy Technology Data Exchange (ETDEWEB)
Jalali, Majid [Isfahan Nuclear Science and Technology Research Institute (NSTRT), Reactor and Accelerators Research and Development School, Atomic Energy Organization (Iran, Islamic Republic of)], E-mail: m_jalali@entc.org.ir; Mohammadi, Ali [Faculty of Science, Department of Physics, University of Kashan, Km. 6, Ravand Road, Kashan (Iran, Islamic Republic of)
2008-05-15
The compounds Na{sub 2}B{sub 4}O{sub 7}, H{sub 3}BO{sub 3}, CdCl{sub 2} and NaCl and their solutions attenuate gamma rays in addition to neutron absorption. These compounds are widely used in the shielding of neutron sources, reactor control and neutron converters. Mass attenuation coefficients of gamma related to the four compounds aforementioned, in energies 662, 778.9, 867.38, 964.1, 1085.9, 1173, 1212.9, 1299.1,1332 and 1408 keV, have been determined by the {gamma} rays transmission method in a good geometry setup; also, these coefficients were calculated by MCNP code. A comparison between experiments, simulations and Xcom code has shown that the study has potential application for determining the attenuation coefficient of various compound materials. Experiment and computation show that H{sub 3}BO{sub 3} with the lowest average Z has the highest gamma ray attenuation coefficient among the aforementioned compounds.
A novel method for measuring polymer-water partition coefficients.
Zhu, Tengyi; Jafvert, Chad T; Fu, Dafang; Hu, Yue
2015-11-01
Low density polyethylene (LDPE) often is used as the sorbent material in passive sampling devices to estimate the average temporal chemical concentration in water bodies or sediment pore water. To calculate water phase chemical concentrations from LDPE concentrations accurately, it is necessary to know the LDPE-water partition coefficients (KPE-w) of the chemicals of interest. However, even moderately hydrophobic chemicals have large KPE-w values, making direct measurement experimentally difficult. In this study we evaluated a simple three phase system from which KPE-w can be determined easily and accurately. In the method, chemical equilibrium distribution between LDPE and a surfactant micelle pseudo-phase is measured, with the ratio of these concentrations equal to the LDPE-micelle partition coefficient (KPE-mic). By employing sufficient mass of polymer and surfactant (Brij 30), the mass of chemical in the water phase remains negligible, albeit in equilibrium. In parallel, the micelle-water partition coefficient (Kmic-w) is determined experimentally. KPE-w is the product of KPE-mic and Kmic-w. The method was applied to measure values of KPE-w for 17 polycyclic aromatic hydrocarbons, 37 polychlorinated biphenyls, and 9 polybrominated diphenylethers. These values were compared to literature values. Mass fraction-based chemical activity coefficients (γ) were determined in each phase and showed that for each chemical, the micelles and LDPE had nearly identical affinity.
A Study of Eddy Viscosity Coefficient in Numerical Tidal Simulation
Institute of Scientific and Technical Information of China (English)
陈永平; 雷智益
2001-01-01
Based on the fluid motion equations, the physical meaning of eddy viscosity coefficient and the rationality of theBoussinesq hypothesis are discussed in this paper. The effect of the coefficient on numerical stability is analyzed briefly.A semi-enclosed rectangular sea area, with an orthogonal spur dike, is applied in a 2-D numerical model to study the effect of horizontal eddy viscosity coefficient (AH). The computed result shows that AH has little influence on the tidal level and averaged flow velocity, but has obvious influence on the intensity and the range of return flow around near thespur dike. Correspondingly, a wind-driven current pool and an annular current are applied in a 3-D numerical modelrespectively to study the effect of vertical eddy viscosity coefficient (AV). The computed result shows that the absolute value of AV is inversely proportional to that of horizontal velocity, and the vertical gradient value of AV determines the ver-tical distribution of horizontal velocity. The distribution form of AV is theoretically recommended as a parabolic type, ofwhich the maximum value appears at 0.5 H.
DIFFERENCE SCHEMES BASING ON COEFFICIENT APPROXIMATION
Institute of Scientific and Technical Information of China (English)
MOU Zong-ze; LONG Yong-xing; QU Wen-xiao
2005-01-01
In respect of variable coefficient differential equations, the equations of coefficient function approximation were more accurate than the coefficient to be frozen as a constant in every discrete subinterval. Usually, the difference schemes constructed based on Taylor expansion approximation of the solution do not suit the solution with sharp function.Introducing into local bases to be combined with coefficient function approximation, the difference can well depict more complex physical phenomena, for example, boundary layer as well as high oscillatory, with sharp behavior. The numerical test shows the method is more effective than the traditional one.
Magnetoelectric voltage coefficients of magnetoelectric composites
Institute of Scientific and Technical Information of China (English)
WAN Yong-ping; ZHONG Zheng; QIU Jin-hao
2006-01-01
The magnetoelectric(ME) effect of the particulate magnetostrictive/piezoelectric composite was theoretically studied. The dependence of the ME voltage coefficients on the material properties of the magnetostrictive phase was discussed. The permittivity,permeability and the elastic modulus of the magnetostrictive phase generally have obvious influences on the ME voltage coefficients. The magnetostrictive phase with a large permittivity,large permeability or stiffer modulus will respectively contribute to the higher ME voltage coefficients. For a certain kind of piezoelectric matrix,the ME voltage coefficients can be improved to some extent by choosing those magnetostrictive materials with large permittivity,permeability or high elastic modulus.
Why the Method of Undetermined Coefficients Works.
Ross, Clay C., Jr.
1991-01-01
This note presents a simple theorem which explains why the method of undetermined coefficients works in finding a particular solution, both for differential equations and difference equations. (Author)
Comparing linear probability model coefficients across groups
DEFF Research Database (Denmark)
Holm, Anders; Ejrnæs, Mette; Karlson, Kristian Bernt
2015-01-01
This article offers a formal identification analysis of the problem in comparing coefficients from linear probability models between groups. We show that differences in coefficients from these models can result not only from genuine differences in effects, but also from differences in one or more...... of the following three components: outcome truncation, scale parameters and distributional shape of the predictor variable. These results point to limitations in using linear probability model coefficients for group comparisons. We also provide Monte Carlo simulations and real examples to illustrate...... these limitations, and we suggest a restricted approach to using linear probability model coefficients in group comparisons....