WorldWideScience

Sample records for average energy losses

  1. Energy losses in switches

    Energy Technology Data Exchange (ETDEWEB)

    Martin, T.H.; Seamen, J.F.; Jobe, D.O.

    1993-07-01

    The authors experiments show energy losses between 2 and 10 times that of the resistive time predictions. The experiments used hydrogen, helium, air, nitrogen, SF{sub 6} polyethylene, and water for the switching dielectric. Previously underestimated switch losses have caused over predicting the accelerator outputs. Accurate estimation of these losses is now necessary for new high-efficiency pulsed power devices where the switching losses constitute the major portion of the total energy loss. They found that the switch energy losses scale as (V{sub peak}I{sub peak}){sup 1.1846}. When using this scaling, the energy losses in any of the tested dielectrics are almost the same. This relationship is valid for several orders of magnitude and suggested a theoretical basis for these results. Currents up to .65 MA, with voltages to 3 MV were applied to various gaps during these experiments. The authors data and the developed theory indicates that the switch power loss continues for a much longer time than the resistive time, with peak power loss generally occurring at peak current in a ranging discharge instead of the early current time. All of the experiments were circuit code modeled after developing a new switch loss version based on the theory. The circuit code predicts switch energy loss and peak currents as a function of time. During analysis of the data they noticed slight constant offsets between the theory and data that depended on the dielectric. They modified the plasma conductivity for each tested dielectric to lessen this offset.

  2. Cosmic structure, averaging and dark energy

    CERN Document Server

    Wiltshire, David L

    2013-01-01

    These lecture notes review the theoretical problems associated with coarse-graining the observed inhomogeneous structure of the universe at late epochs, of describing average cosmic evolution in the presence of growing inhomogeneity, and of relating average quantities to physical observables. In particular, a detailed discussion of the timescape scenario is presented. In this scenario, dark energy is realized as a misidentification of gravitational energy gradients which result from gradients in the kinetic energy of expansion of space, in the presence of density and spatial curvature gradients that grow large with the growth of structure. The phenomenology and observational tests of the timescape model are discussed in detail, with updated constraints from Planck satellite data. In addition, recent results on the variation of the Hubble expansion on < 100/h Mpc scales are discussed. The spherically averaged Hubble law is significantly more uniform in the rest frame of the Local Group of galaxies than in t...

  3. Calculating Free Energies Using Average Force

    Science.gov (United States)

    Darve, Eric; Pohorille, Andrew; DeVincenzi, Donald L. (Technical Monitor)

    2001-01-01

    A new, general formula that connects the derivatives of the free energy along the selected, generalized coordinates of the system with the instantaneous force acting on these coordinates is derived. The instantaneous force is defined as the force acting on the coordinate of interest so that when it is subtracted from the equations of motion the acceleration along this coordinate is zero. The formula applies to simulations in which the selected coordinates are either unconstrained or constrained to fixed values. It is shown that in the latter case the formula reduces to the expression previously derived by den Otter and Briels. If simulations are carried out without constraining the coordinates of interest, the formula leads to a new method for calculating the free energy changes along these coordinates. This method is tested in two examples - rotation around the C-C bond of 1,2-dichloroethane immersed in water and transfer of fluoromethane across the water-hexane interface. The calculated free energies are compared with those obtained by two commonly used methods. One of them relies on determining the probability density function of finding the system at different values of the selected coordinate and the other requires calculating the average force at discrete locations along this coordinate in a series of constrained simulations. The free energies calculated by these three methods are in excellent agreement. The relative advantages of each method are discussed.

  4. Averaged null energy condition from causality

    Science.gov (United States)

    Hartman, Thomas; Kundu, Sandipan; Tajdini, Amirhossein

    2017-07-01

    Unitary, Lorentz-invariant quantum field theories in flat spacetime obey mi-crocausality: commutators vanish at spacelike separation. For interacting theories in more than two dimensions, we show that this implies that the averaged null energy, ∫ duT uu , must be non-negative. This non-local operator appears in the operator product expansion of local operators in the lightcone limit, and therefore contributes to n-point functions. We derive a sum rule that isolates this contribution and is manifestly positive. The argument also applies to certain higher spin operators other than the stress tensor, generating an infinite family of new constraints of the form ∫ duX uuu··· u ≥ 0. These lead to new inequalities for the coupling constants of spinning operators in conformal field theory, which include as special cases (but are generally stronger than) the existing constraints from the lightcone bootstrap, deep inelastic scattering, conformal collider methods, and relative entropy. We also comment on the relation to the recent derivation of the averaged null energy condition from relative entropy, and suggest a more general connection between causality and information-theoretic inequalities in QFT.

  5. Kinetic energy equations for the average-passage equation system

    Science.gov (United States)

    Johnson, Richard W.; Adamczyk, John J.

    1989-01-01

    Important kinetic energy equations derived from the average-passage equation sets are documented, with a view to their interrelationships. These kinetic equations may be used for closing the average-passage equations. The turbulent kinetic energy transport equation used is formed by subtracting the mean kinetic energy equation from the averaged total instantaneous kinetic energy equation. The aperiodic kinetic energy equation, averaged steady kinetic energy equation, averaged unsteady kinetic energy equation, and periodic kinetic energy equation, are also treated.

  6. Kinetic energy equations for the average-passage equation system

    Science.gov (United States)

    Johnson, Richard W.; Adamczyk, John J.

    1989-01-01

    Important kinetic energy equations derived from the average-passage equation sets are documented, with a view to their interrelationships. These kinetic equations may be used for closing the average-passage equations. The turbulent kinetic energy transport equation used is formed by subtracting the mean kinetic energy equation from the averaged total instantaneous kinetic energy equation. The aperiodic kinetic energy equation, averaged steady kinetic energy equation, averaged unsteady kinetic energy equation, and periodic kinetic energy equation, are also treated.

  7. Averaged Null Energy Condition from Causality

    CERN Document Server

    Hartman, Thomas; Tajdini, Amirhossein

    2016-01-01

    Unitary, Lorentz-invariant quantum field theories in flat spacetime obey microcausality: commutators vanish at spacelike separation. For interacting theories in more than two dimensions, we show that this implies that the averaged null energy, $\\int du T_{uu}$, must be positive. This non-local operator appears in the operator product expansion of local operators in the lightcone limit, and therefore contributes to $n$-point functions. We derive a sum rule that isolates this contribution and is manifestly positive. The argument also applies to certain higher spin operators other than the stress tensor, generating an infinite family of new constraints of the form $\\int du X_{uuu\\cdots u} \\geq 0$. These lead to new inequalities for the coupling constants of spinning operators in conformal field theory, which include as special cases (but are generally stronger than) the existing constraints from the lightcone bootstrap, deep inelastic scattering, conformal collider methods, and relative entropy. We also comment ...

  8. Parton energy loss in glasma

    Energy Technology Data Exchange (ETDEWEB)

    Aurenche, P. [LAPTH, Universite de Savoie, CNRS, BP 110, F-74941, Annecy-le-Vieux Cedex (France); Zakharov, B.G. [L.D. Landau Institute for Theoretical Physics, GSP-1, 117940, Kosygina Str. 2, 117334 Moscow (Russian Federation)

    2013-01-08

    We study the synchrotron-like gluon emission in AA-collisions from fast partons due to interaction with the coherent glasma color fields. Our results show that for RHIC and LHC conditions the contribution of this mechanism to parton energy loss is much smaller than the radiative energy loss in the plasma phase.

  9. Energy losses in photovoltaic systems

    Science.gov (United States)

    Anis, Wagdy R.; Nour, M. Abdulsadek

    1994-10-01

    The maximum power generated by photovoltaic (PV) arrays is not fully used. During summer, the main cause for the energy loss is the system design that necessitates an oversizing of the PV array to supply the load during the winter season when the solar energy is limited. Other reasons that cause energy loss are: the mismatch between the array and the load or battery, the loss in the batteries, and the loss due to the PV array disconnect. The array disconnect loss takes place during summer season when the battery is fully charged. To avoid the disconnect loss, a novel battery voltage regulator (BVR) is used. This supplies the load directly from the array when the battery is fully charged. Energy losses have been analyzed and divided into fundamental (unavoidable) and non-fundamental losses. Both conventional (using a conventional BVR) and new (using a novel BVR) PV systems are studied. A load that consumes constant power for 24 h a day through the year is considered. The climatic condition of Cairo city is taken as the test case.

  10. Analytic computation of average energy of neutrons inducing fission

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Alexander Rich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-12

    The objective of this report is to describe how I analytically computed the average energy of neutrons that induce fission in the bare BeRP ball. The motivation of this report is to resolve a discrepancy between the average energy computed via the FMULT and F4/FM cards in MCNP6 by comparison to the analytic results.

  11. 77 FR 24940 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2012-04-26

    ...: Representative Average Unit Costs of Energy'', dated March 10, 2011, 76 FR 13168. May 29, 2012, the cost figures...: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency and Renewable Energy, Department... forecasting the representative average unit costs of five residential energy sources for the year...

  12. THEORETICAL CALCULATION OF THE RELATIVISTIC SUBCONFIGURATION-AVERAGED TRANSITION ENERGIES

    Institute of Scientific and Technical Information of China (English)

    张继彦; 杨向东; 杨国洪; 张保汉; 雷安乐; 刘宏杰; 李军

    2001-01-01

    A method for calculating the average energies of relativistic subconfigurations in highly ionized heavy atoms has been developed in the framework of the multiconfigurational Dirac-Fock theory. The method is then used to calculate the average transition energies of the spin-orbit-split 3d-4p transition of Co-like tungsten, the 3d-5f transition of Cu-like tantalum, and the 3d-5f transitions of Cu-like and Zn-like gold samples. The calculated results are in good agreement with those calculated with the relativistic parametric potential method and also with the experimental results.

  13. Averaged null energy condition in Loop Quantum Cosmology

    CERN Document Server

    Li, Li-Fang

    2008-01-01

    Wormhole and time machine are very interesting objects in general relativity. However, they need exotic matters which are impossible in classical level to support them. But if we introduce the quantum effects of gravity into the stress-energy tensor, these peculiar objects can be constructed self-consistently. Fortunately, loop quantum cosmology (LQC) has the potential to serve as a bridge connecting the classical theory and quantum gravity. Therefore it provides a simple way for the study of quantum effect in the semiclassical case. As is well known, loop quantum cosmology is very successful to deal with the behavior of early universe. In the early stage, if taken the quantum effect into consideration, inflation is natural because of the violation of every kind of local energy conditions. Similar to the inflationary universe, the violation of the averaged null energy condition is the necessary condition for the traversable wormholes. In this paper, we investigate the averaged null energy condition in LQC in ...

  14. Ampere Average Current Photoinjector and Energy Recovery Linac

    CERN Document Server

    Ben-Zvi, Ilan; Calaga, R; Cameron, P; Chang, X; Gassner, D M; Hahn, H; Hershcovitch, A; Hseuh, H C; Johnson, P; Kayran, D; Kewisch, J; Lambiase, R F; Litvinenko, Vladimir N; McIntyre, G; Nicoletti, A; Rank, J; Roser, T; Scaduto, J; Smith, K; Srinivasan-Rao, T; Wu, K C; Zaltsman, A; Zhao, Y

    2004-01-01

    High-power Free-Electron Lasers were made possible by advances in superconducting linac operated in an energy-recovery mode, as demonstrated by the spectacular success of the Jefferson Laboratory IR-Demo. In order to get to much higher power levels, say a fraction of a megawatt average power, many technological barriers are yet to be broken. BNL’s Collider-Accelerator Department is pursuing some of these technologies for a different application, that of electron cooling of high-energy hadron beams. I will describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun employing a new secondary-emission multiplying cathode and an accelerator cavity, both capable of producing of the order of one ampere average current.

  15. Averaged null energy condition and quantum inequalities in curved spacetime

    CERN Document Server

    Kontou, Eleni-Alexandra

    2015-01-01

    The Averaged Null Energy Condition (ANEC) states that the integral along a complete null geodesic of the projection of the stress-energy tensor onto the tangent vector to the geodesic cannot be negative. ANEC can be used to rule out spacetimes with exotic phenomena, such as closed timelike curves, superluminal travel and wormholes. We prove that ANEC is obeyed by a minimally-coupled, free quantum scalar field on any achronal null geodesic (not two points can be connected with a timelike curve) surrounded by a tubular neighborhood whose curvature is produced by a classical source. To prove ANEC we use a null-projected quantum inequality, which provides constraints on how negative the weighted average of the renormalized stress-energy tensor of a quantum field can be. Starting with a general result of Fewster and Smith, we first derive a timelike projected quantum inequality for a minimally-coupled scalar field on flat spacetime with a background potential. Using that result we proceed to find the bound of a qu...

  16. Scale anomalies imply violation of the averaged null energy condition

    CERN Document Server

    Visser, M

    1994-01-01

    Considerable interest has recently been expressed regarding the issue of whether or not quantum field theory on a fixed but curved background spacetime satisfies the averaged null energy condition (ANEC). A comment by Wald and Yurtsever [Phys. Rev. D43, 403 (1991)] indicates that in general the answer is no. In this note I explore this issue in more detail, and succeed in characterizing a broad class of spacetimes in which the ANEC is guaranteed to be violated. Finally, I add some comments regarding ANEC violation in Schwarzschild spacetime.

  17. Averaged-null-energy condition for electromagnetism in Minkowski spacetime

    Energy Technology Data Exchange (ETDEWEB)

    Folacci, A. (Universite de Corse, Faculte des Sciences, Boite Postale 52, 20250 Corti (France))

    1992-09-15

    We show, on four-dimensional Minkowski spacetime, that {l angle}{psi}{vert bar}{ital T}{sub {mu}{nu}}{vert bar}{psi}{r angle}, the renormalized expectation value in a general quantum state {vert bar}{psi}{r angle} of the stress-energy tensor for electromagnetism, satisfies the averaged-null-energy condition, i.e., that {integral}{ital d}{lambda}{l angle}{psi}{vert bar}{ital T}{sub {mu}{nu}}{vert bar}{psi}{r angle}{ital t}{sup {mu}}{ital t{nu}}{ge}0 where this integral is along complete null geodesics with an affine parameter {lambda} and tangent vector {ital t}{sup {mu}}.

  18. Energy-loss distributions of fission fragments

    Energy Technology Data Exchange (ETDEWEB)

    Demidovich, N.N.; Nakhutin, I.E.; Shatunov, V.G.

    1976-03-05

    The f-f coincidence method was used to investigate the change in the form of the energy-loss distributions of Cf/sup 252/ fission fragments in air, down to fragment energies approx.0.8 MeV. A theoretical model is considered for the estimate of the mean-squared deviations of the fragment energy-loss distributions. (AIP)

  19. Measurement of TeV muon energy loss in iron

    Energy Technology Data Exchange (ETDEWEB)

    Sakumoto, W.K.; de Barbaro, P.; Bodek, A.; Budd, H.S.; Kim, B.J. (Department of Physics and Astronomy, University of Rochester, Rochester, New York 14627 (United States)); Merritt, F.S.; Oreglia, M.J.; Schellman, H.; Schumm, B.A. (Enrico Fermi Institute and Department of Physics, University of Chicago, Chicago, Illinois 60637 (United States)); Bachmann, K.T.; Blair, R.E.; Foudas, C.; King, B.J.; Lefmann, W.C.; Leung, W.C.; Mishra, S.R.; Oltman, E.; Quintas, P.Z.; Rabinowitz, S.A.; Sciulli, F.; Seligman, W.G.; Shaevitz, M.H. (Department of Physics, Columbia University, New York, New York 10027 (United States)); Bernstein, R.H.; Borcherding, F.O.; Fisk, H.E.; Lamm, M.J.; Marsh, W.; Merritt, K.W.; Rapidis, P.A.; Yovanovitch, D. (Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)); Sandler, P.H.; Smith, W.H. (University of Wisconsin, Madison, Wisconsin 53706 (United States))

    1992-05-01

    We measure the energy loss of high-energy muons (up to 1 TeV) from cosmic-ray muons incident on the iron-scintillator calorimeter of the Chicago-Columbia-Fermilab-Rochester Collaboration (Lab E) neutrino detector at Fermilab. Measurements of the differential energy loss spectra in Fe and the average {ital dE}/{ital dx} energy loss in Fe are presented as functions of muon energy and are compared against calculations. There is reasonable agreement between the measurements and calculations except in the region of small energy losses (under a few GeV) for 1-TeV muons, where the measurement is about 30% lower than the calculation. This level of agreement with theory implies that reliable simulations of the performance of muon detectors for future TeV colliders can be done.

  20. Muon Energy Loss Upsteam of the Muon Spectrometer

    CERN Document Server

    Nikolopoulos, K; Kourkoumelis, C; Poppleton, A

    2006-01-01

    A method for the estimation of the muon energy loss downstream of the Muons Spectrometer is presented. The method provides an improved and updated parametrization of the muon energy loss in ATLAS, along with an estimation based on the actual energy deposition in the calorimeters. The latter aims to account, on an event-by-event basis, for the statistical fluctuations of the energy loss. The final implementation of the presented method combines both the energy loss parametrization and the calorimeter information. This hybrid method provides on average a 5% improvement on the muon stand-alone momentum resolution, reaching 10% for , and reduces the non-gaussian tails. The method is implemented inside the ATHENA framework, in the MuidCaloEnergyTools package.

  1. Mass Hierarchy of Collisional Energy Loss

    CERN Document Server

    Kolevatov, Rodion

    2008-01-01

    Collisional parton energy loss is revisited within a simple model assuming incoherent elastic scattering of on-shell projectile partons on partonic constituents of the QGP with HTL screening. The thermal motion of plasma particles is carefully taken into account. Results on $dE/dx$ are found to be consistent with other authors. There is a significant discrepancy in the energy loss pattern for the cases with thermal motion on and off, which illustrates the importance of taking the kinematics into account exactly. The dependence on the mass of the partons forming the plasma is included in the calculations and its influence on the collisional energy loss is studied. The mass hierarchy of collisional energy loss is found to have a strong dependence on the mass introduced for plasma particles. Due to difference in the mass hierarchy with radiative energy loss, the collisional one when included increases the relative suppression of heavy quarks compared to light quarks.

  2. A primal sub-gradient method for structured classification with the averaged sum loss

    Directory of Open Access Journals (Sweden)

    Mančev Dejan

    2014-12-01

    Full Text Available We present a primal sub-gradient method for structured SVM optimization defined with the averaged sum of hinge losses inside each example. Compared with the mini-batch version of the Pegasos algorithm for the structured case, which deals with a single structure from each of multiple examples, our algorithm considers multiple structures from a single example in one update. This approach should increase the amount of information learned from the example. We show that the proposed version with the averaged sum loss has at least the same guarantees in terms of the prediction loss as the stochastic version. Experiments are conducted on two sequence labeling problems, shallow parsing and part-of-speech tagging, and also include a comparison with other popular sequential structured learning algorithms.

  3. Energy Loss of Proton in Extraction Window

    Institute of Scientific and Technical Information of China (English)

    LIU; Bao-jie; ZENG; Zi-qiang

    2015-01-01

    The particle is transported in vacuum in accelerator,and is exported through extraction windows.The Kapton foil is used in a 3 MeV proton accelerator.The energy loss of 3 MeV proton is calculated when it comes through Kapton foil of different thicknesses with Monte Carlo method.The energy loss of 3 MeV proton in

  4. Energy loss of fast quarks in nuclei.

    Science.gov (United States)

    Johnson, M B; Kopeliovich, B Z; Potashnikova, I K; McGaughey, P L; Moss, J M; Peng, J C; Garvey, G T; Leitch, M J; Adams, M R; Alde, D M; Baer, H W; Barlett, M L; Brown, C N; Cooper, W E; Carey, T A; Danner, G; Hoffmann, G W; Hsiung, Y B; Kaplan, D M; Klein, A; Lee, C; Lillberg, J W; McCarthy, R L; Mishra, C S; Wang, M J

    2001-05-14

    We report an analysis of the nuclear dependence of the yield of Drell-Yan dimuons from the 800 GeV/c proton bombardment of 2H, C, Ca, Fe, and W targets. Employing a new formulation of the Drell-Yan process in the rest frame of the nucleus, this analysis examines the effect of initial-state energy loss and shadowing on the nuclear-dependence ratios versus the incident proton's momentum fraction and dimuon effective mass. The resulting energy loss per unit path length is -dE/dz = 2.32+/-0.52+/-0.5 GeV/fm. This is the first observation of a nonzero energy loss of partons traveling in a nuclear environment.

  5. Energy loss of fast quarks in nuclei

    CERN Document Server

    Johnson, M B; Potashnikova, I K; McGaughey, P L; Moss, J M; Peng, J C; Garvey, G T; Leitch, M J; Adams, M R; Alde, D M; Baer, Howard W; Barlett, M L; Brown, C N; Cooper, W E; Carey, T A; Danner, G; Hoffmann, G W; Hsiung, Y B; Kaplan, D M; Klein, A; Lee, C; Lillberg, J W; McCarthy, R L; Mishra, C S; Wang, M J

    2001-01-01

    We report an analysis of the nuclear dependence of the yield of Drell-Yan dimuons from the 800 GeV/c proton bombardment of $^2H$, C, Ca, Fe, and W targets. Employing a new formulation of the Drell-Yan process in the rest frame of the nucleus, this analysis examines the effect of initial-state energy loss and shadowing on the nuclear-dependence ratios versus the incident proton's momentum fraction and dimuon effective mass. The resulting energy loss per unit path length is $-dE/dz = 2.32 \\pm 0.52\\pm 0.5$ GeV/fm. This is the first observation of a nonzero energy loss of partons traveling in nuclear environment.

  6. Relativistic energy loss in a dispersive medium

    DEFF Research Database (Denmark)

    Houlrik, Jens Madsen

    2002-01-01

    The electron energy loss in a dispersive medium is obtained using macroscopic electrodynamics taking advantage of a static frame of reference. Relativistic corrections are described in terms of a dispersive Lorentz factor obtained by replacing the vacuum velocity c by the characteristic phase...

  7. Relativistic energy loss in a dispersive medium

    DEFF Research Database (Denmark)

    Houlrik, Jens Madsen

    2002-01-01

    The electron energy loss in a dispersive medium is obtained using macroscopic electrodynamics taking advantage of a static frame of reference. Relativistic corrections are described in terms of a dispersive Lorentz factor obtained by replacing the vacuum velocity c by the characteristic phase...

  8. Energy loss of fast quarks in nuclei

    CERN Document Server

    Moss, J M; Johnson, M B; Leitch, M J; McGaughey, P L; Kopeliovich, B Z; Potashnikova, I K; Peng, J C

    2001-01-01

    We report an analysis of the nuclear dependence of the yield of Drell-Yan (DY) dimuons from the 800 GeV/c proton bombardment of $^2H$, C, Ca, Fe, and W targets. A light-cone formulation of the DY process is employed in the rest frame of the nucleus. In this frame, for $x_2\\ll x_1$, DY production appears as bremsstrahlung of a virtual photon followed by decay into dileptons. We treat the two sources of nuclear suppression, energy loss and shadowing, in a consistent formulation. Shadowing, involving no free parameters, is calculated within the light-cone dipole formalism. Initial-state energy loss, the only unknown in the problem, is determined from a fit to the nuclear-dependence ratio versus $x_1$. With the assumption of constant energy loss per unit path length, we find $-dE/dz = 2.32 \\pm 0.52\\pm 0.5$ GeV/fm. This is the first observation of a nonzero energy loss of partons traveling in nuclear environment.

  9. Exercise Training and Energy Expenditure following Weight Loss.

    Science.gov (United States)

    Hunter, Gary R; Fisher, Gordon; Neumeier, William H; Carter, Stephen J; Plaisance, Eric P

    2015-09-01

    This study aims to determine the effects of aerobic or resistance training on activity-related energy expenditure (AEE; kcal·d(-1)) and physical activity index (activity-related time equivalent (ARTE)) following weight loss. It was hypothesized that weight loss without exercise training would be accompanied by decreases in AEE, ARTE, and nontraining physical activity energy expenditure (nonexercise activity thermogenesis (NEAT)) and that exercise training would prevent decreases in free-living energy expenditure. One hundred forty premenopausal women had an average weight loss of 25 lb during a diet (800 kcal·d(-1)) of furnished food. One group aerobically trained 3 times per week (40 min·d(-1)), another group resistance-trained 3 times per week (10 exercises/2 sets × 10 repetitions), and the third group did not exercise. Dual-energy x-ray absorptiometry was used to measure body composition, indirect calorimetry was used to measure resting energy expenditure (REE) and walking energy expenditure, and doubly labeled water was used to measure total energy expenditure (TEE). AEE, ARTE, and nontraining physical activity energy expenditure (NEAT) were calculated. TEE, REE, and NEAT all decreased following weight loss for the no-exercise group, but not for aerobic and resistance trainers. Only REE decreased in the two exercise groups. Resistance trainers increased ARTE. HR and oxygen uptake while walking on the flat and up a grade were consistently related to TEE, AEE, NEAT, and ARTE. Exercise training prevents a decrease in energy expenditure, including free-living energy expenditure separate from exercise training, following weight loss. Resistance training increases physical activity, whereas economy/ease of walking is associated with increased TEE, AEE, NEAT, and ARTE.

  10. Measurement of mean excitation energy by energy loss

    Institute of Scientific and Technical Information of China (English)

    LiuChang-Shi

    1997-01-01

    The mean excitation energy(MEE) for Al,Ti,Fe,Cu and Ta has been determined experimentally by the Landan equation,which describes the most probable energy loss of electrons in the incidence direction,and the results are consistent with the values given in the literature,THese provide a quick,easy and accurate evaluation method for the experimental MEE.

  11. Microgrids: Energy management by loss minimization technique

    Directory of Open Access Journals (Sweden)

    A. K. Basu, S. Chowdhury, S.P. Chowdhury

    2011-03-01

    Full Text Available Energy management is a techno-economic issue, which dictates, in the context of microgrids, how optimal investment in technology front could bring optimal power quality and reliability (PQR of supply to the consumers. Investment in distributed energy resources (DERs, with their connection to the utility grid at optimal locations and with optimal sizes, saves energy in the form of line loss reduction. Line loss reduction is the indirect benefit to the microgrid owner who may recover it as an incentive from utility. The present paper focuses on planning of optimal siting and sizing of DERs based on minimization of line loss. Optimal siting is done, here, on the loss sensitivity index (LSI method and optimal sizing by differential evolution (DE algorithms, which is, again, compared with particle swarm optimization (PSO technique. Studies are conducted on 6-bus and 14-bus radial networks under islanded mode of operation with electric demand profile. Islanding helps planning of DER capacity of microgrid, which is self-sufficient to cater its own consumers without utility’s support.

  12. Energy loss rate in disordered quantum well

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, P.; Ashraf, S. S. Z. [Centre of Excellence in Nanomaterials, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh-202002 (India); Hasan, S. T. [Physics Department, Faculty of Science, The M.S. University of Baroda, Vadodara-390002 (India); Sharma, A. C. [Physics Department, Sibli National College, Azamgarh-276128 (India)

    2014-04-24

    We report the effect of dynamically screened deformation potential on the electron energy loss rate in disordered semiconductor quantum well. Interaction of confined electrons with bulk acoustic phonons has been considered in the deformation coupling. The study concludes that the dynamically screened deformation potential coupling plays a significant role as it substantially affects the power dependency of electron relaxation on temperature and mean free path.

  13. Generalized average local ionization energy and its representations in terms of Dyson and energy orbitals.

    Science.gov (United States)

    Kohut, Sviataslau V; Cuevas-Saavedra, Rogelio; Staroverov, Viktor N

    2016-08-21

    Ryabinkin and Staroverov [J. Chem. Phys. 141, 084107 (2014)] extended the concept of average local ionization energy (ALIE) to correlated wavefunctions by defining the generalized ALIE as Ī(r)=-∑jλj|fj(r)|(2)/ρ(r), where λj are the eigenvalues of the generalized Fock operator and fj(r) are the corresponding eigenfunctions (energy orbitals). Here we show that one can equivalently express the generalized ALIE as Ī(r)=∑kIk|dk(r)|(2)/ρ(r), where Ik are single-electron removal energies and dk(r) are the corresponding Dyson orbitals. The two expressions for Ī(r) emphasize different physical interpretations of this quantity; their equivalence enables one to calculate the ALIE at any level of ab initio theory without generating the computationally expensive Dyson orbitals.

  14. ENERGY-LOSS FUNCTIONS DERIVED FROM REELS SPECTRA FOR ALUMINUM

    Institute of Scientific and Technical Information of China (English)

    Z.M. Zhang; Z.J. Ding; H.M. Li; K. Salma; X. Sun; R. Shimizu; T. Koshikawa; K. Goto

    2005-01-01

    The effective energy loss functions for Al have been derived from differential inverse inelastic mean free path based on the extended Landau approach. It has been revealed that the effective energy loss function is very close in value to the theoretical surface energy loss function in the lower energy loss region but gradually approaches the theoretical bulk energy loss function in the higher energy loss region. Moreover, the intensity corresponding to surface excitation in effective energy loss functions decreases with the increase of primary electron energy. These facts show that the present effective energy loss function describes not only surface excitation but also bulk excitation. At last, REELS spectra simulated by Monte Carlo method based on use of the effective energy loss functions has reproduced the experimental REELS spectra with considerable success.

  15. Energy losses in mechanically modified bacterial magnetosomes

    Science.gov (United States)

    Molcan, Matus; Gojzewski, Hubert; Skumiel, Andrzej; Dutz, Silvio; Kovac, Jozef; Kubovcikova, Martina; Kopcansky, Peter; Vekas, Ladislau; Timko, Milan

    2016-09-01

    Magnetosomes are isolated from the Magnetospirillum magneticum strain AMB-1 bacteria. Two samples are compared: magnetosomes normally prepared of a ‘standard’ length and magnetosomes of a short length. Chains of magnetosomes are shortened by mechanical modification (cleavage) by means of sonication treatment. They represent a new geometry of magnetosomes that have not been investigated before. The effect of the sonication is analysed using transmission and electron microscopy, atomic force microscopy, and dynamic light scattering. Scanning imaging reveals three types of shortening effect in a sample of shortened magnetosomes, namely, membrane collapse, membrane destruction, and magnetosome cleavage. Dynamic light scattering shows a reduction of hydrodynamic diameter in a sample of shortened magnetosomes. The magnetic properties of magnetosomes are analysed and compared in DC and AC magnetic fields based on the evaluation of quasi-static hysteresis loops (energy losses) and calorimetric hyperthermia measurements (specific absorption rate), respectively. A sample of shortened magnetosomes behaves magnetically in a different manner, showing that both the energy loss and the specific absorption rate are reduced, and thereby indicates a variation in the heating process. The magnetic properties of magnetosomes, together with the new and stable geometry, are balanced, which opens the way for a better adaptation of the magnetic field parameters for particular applications.

  16. New approach to energy loss measurements

    CERN Document Server

    Trzaska, W H; Alanko, T; Mutterer, M; Raeisaenen, J; Tjurin, G; Wojdyr, M

    2002-01-01

    A new approach to energy loss measurements is proposed. In the same experiment electronic stopping force (power) in gold, nickel, carbon, polycarbonate and Havar for sup 4 sup 0 Ar, sup 2 sup 8 Si, sup 1 sup 6 O, sup 4 He and sup 1 H ions in the energy range 0.12-11 MeV/u has been measured. In this paper we give the full results for gold, nickel, and carbon and for sup 4 sup 0 Ar, sup 1 sup 6 O, sup 4 He and sup 1 H ions. Good agreement of the measured stopping force values for light ions with literature data is interpreted as the positive test of the experimental technique. The same technique used with heavy ions yields agreement with the published data only for energies above 1 MeV/u. At lower energies we observe progressively increasing discrepancy. This discrepancy is removed completely as soon as we neglect pulse height defect compensation. This observation makes us believe that the majority of the published results as well as semi-empirical calculations based on them (like the popular SRIM) may be in er...

  17. Parton energy loss in hot and dense QCD medium

    Institute of Scientific and Technical Information of China (English)

    LIU Jie; MAO Yaxian; XIANG Wenchang; ZHOU Daicui

    2006-01-01

    Induced gluon radiation and energy loss of heavy quark in hot and dense QCD media are discussed. Using the light-cone path integral approach, an analytical formula of the energy loss of heavy quark is derived. The results show that the quark energy loss obviously depends on the mass of quark, i. e. a remarkable suppression occurs in the case of heavy quark comparing to a light one. The radiative energy loss of energetic quark is proportional to L2, where L is the length of the medium. The dependence of energy loss on L2 turns to L with decreasing quark energy.

  18. 16 CFR Appendix K to Part 305 - Representative Average Unit Energy Costs

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Representative Average Unit Energy Costs K... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING...

  19. Charge exchange and energy loss of slow highly charged ions in 1 nm thick carbon nanomembranes.

    Science.gov (United States)

    Wilhelm, Richard A; Gruber, Elisabeth; Ritter, Robert; Heller, René; Facsko, Stefan; Aumayr, Friedrich

    2014-04-18

    Experimental charge exchange and energy loss data for the transmission of slow highly charged Xe ions through ultrathin polymeric carbon membranes are presented. Surprisingly, two distinct exit charge state distributions accompanied by charge exchange dependent energy losses are observed. The energy loss for ions exhibiting large charge loss shows a quadratic dependency on the incident charge state indicating that equilibrium stopping force values do not apply in this case. Additional angle resolved transmission measurements point on a significant contribution of elastic energy loss. The observations show that regimes of different impact parameters can be separated and thus a particle's energy deposition in an ultrathin solid target may not be described in terms of an averaged energy loss per unit length.

  20. Exploring energy loss by vector flow mapping in children with ventricular septal defect: Pathophysiologic significance.

    Science.gov (United States)

    Honda, Takashi; Itatani, Keiichi; Takanashi, Manabu; Kitagawa, Atsushi; Ando, Hisashi; Kimura, Sumito; Oka, Norihiko; Miyaji, Kagami; Ishii, Masahiro

    2017-10-01

    Vector flow mapping is a novel echocardiographic flow visualization method, and it has enabled us to quantitatively evaluate the energy loss in the left ventricle (intraventricular energy loss). Although intraventricular energy loss is assumed to be a part of left ventricular workload itself, it is unclear what this parameter actually represents. The aim of the present study was to elucidate the characteristics of intraventricular energy loss. We enrolled 26 consecutive children with ventricular septal defect (VSD). On echocardiography vector flow mapping, intraventricular energy loss was measured in the apical 3-chamber view. We measured peak energy loss and averaged energy loss in the diastolic and systolic phases, and subsequently compared these parameters with catheterization parameters and serum brain natrium peptide (BNP) level. Diastolic, peak, and systolic energy loss were strongly and positively correlated with right ventricular systolic pressure (r=0.76, 0.68, and 0.56, penergy loss were significantly correlated with BNP (r=0.75, 0.69 and 0.49, penergy loss in the left ventricle. The results of the present study encourage further studies in other study populations to elucidate the characteristics of intraventricular energy loss for its possible clinical application. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Telomere loss, not average telomere length, confers radiosensitivity to TK6-irradiated cells

    Energy Technology Data Exchange (ETDEWEB)

    Berardinelli, F.; Nieri, D.; Sgura, A.; Tanzarella, C. [Dip. Di Biologia, Università “Roma Tre”, Rome (Italy); INFN – “Roma Tre”, Rome (Italy); Antoccia, A., E-mail: antoccia@uniroma3.it [Dip. Di Biologia, Università “Roma Tre”, Rome (Italy); INFN – “Roma Tre”, Rome (Italy)

    2012-12-15

    Highlights: ► Ionizing radiation induced telomere lengthening in TK6 clones from a single cell. ► Telomerase is not involved in the telomere lengthening observed. ► TK6 cells display very heterogeneous values in telomere length and telomere loss. ► A selective process account for telomere lengthening in irradiated cells. ► Telomere loss, not mean telomere length, is predictive of radiosensitivity. - Abstract: Many and varied are the proposed mechanisms that lead to resistance to ionizing radiation treatment. Among them, an inverse relationship between telomere length and radioresistance has been recently advanced. Investigating such a relationship in TK6 lymphoblasts, we found that clones originating from cells survived to 4 Gy of X-rays showed a significantly higher telomere length when compared with clones grown from untreated cells. The lengthening observed was not attributable to a radiation-induced increase in telomerase activity, as demonstrated by TRAP assay performed in the dose range of 1–10 Gy. Given the evidence that TK6 whole population was characterized by heterogeneity in cellular mean telomere length and telomere loss, we tested the hypothesis that a process of selection may favour cells with longer telomeres (more radioresistant cells) following exposure to irradiation. In order to do this 15 independent TK6 clones were selected and characterized for telomere length and loss on the basis of q-FISH and flow-FISH analysis. Among the screened clones four characterized by long telomeres and four characterized by short telomeres were tested for their radiosensitivity by means of clonogenic assay. The results obtained showed that, in our experimental conditions (cellular model, radiation doses) no significant correlation was observed between radiosensitivity and mean telomere lengths, whereas a positive correlation was observed with respect to telomere loss. Overall, these results indicate that telomere loss and not mean telomere length plays

  2. 76 FR 13168 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2011-03-10

    ... of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products... pursuant to the Energy Policy and Conservation Act. The five sources are electricity, natural gas, No. 2... of the Energy Policy and Conservation Act (Act) requires that DOE prescribe test procedures for...

  3. Medical Image Fusion Algorithm based on Local Average Energy-Motivated PCNN in NSCT Domain

    Directory of Open Access Journals (Sweden)

    Huda Ahmed

    2016-10-01

    Full Text Available Medical Image Fusion (MIF can improve the performance of medical diagnosis, treatment planning and image-guided surgery significantly through providing high-quality and rich-information medical images. Traditional MIF techniques suffer from common drawbacks such as: contrast reduction, edge blurring and image degradation. Pulse-coupled Neural Network (PCNN based MIF techniques outperform the traditional methods in providing high-quality fused images due to its global coupling and pulse synchronization property; however, the selection of significant features that motivate the PCNN is still an open problem and plays a major role in measuring the contribution of each source image into the fused image. In this paper, a medical image fusion algorithm is proposed based on the Non-subsampled Contourlet Transform (NSCT and the Pulse-Coupled Neural Network (PCNN to fuse images from different modalities. Local Average Energy is used to motivate the PCNN due to its ability to capture salient features of the image such as edges, contours and textures. The proposed approach produces a high quality fused image with high contrast and improved content in comparison with other image fusion techniques without loss of significant details on both levels: the visual and the quantitative.

  4. Thermal motion in proteins: Large effects on the time-averaged interaction energies

    Directory of Open Access Journals (Sweden)

    Martin Goethe

    2016-03-01

    Full Text Available As a consequence of thermal motion, inter-atomic distances in proteins fluctuate strongly around their average values, and hence, also interaction energies (i.e. the pair-potentials evaluated at the fluctuating distances are not constant in time but exhibit pronounced fluctuations. These fluctuations cause that time-averaged interaction energies do generally not coincide with the energy values obtained by evaluating the pair-potentials at the average distances. More precisely, time-averaged interaction energies behave typically smoother in terms of the average distance than the corresponding pair-potentials. This averaging effect is referred to as the thermal smoothing effect. Here, we estimate the strength of the thermal smoothing effect on the Lennard-Jones pair-potential for globular proteins at ambient conditions using x-ray diffraction and simulation data of a representative set of proteins. For specific atom species, we find a significant smoothing effect where the time-averaged interaction energy of a single atom pair can differ by various tens of cal/mol from the Lennard-Jones potential at the average distance. Importantly, we observe a dependency of the effect on the local environment of the involved atoms. The effect is typically weaker for bulky backbone atoms in beta sheets than for side-chain atoms belonging to other secondary structure on the surface of the protein. The results of this work have important practical implications for protein software relying on free energy expressions. We show that the accuracy of free energy expressions can largely be increased by introducing environment specific Lennard-Jones parameters accounting for the fact that the typical thermal motion of protein atoms depends strongly on their local environment.

  5. Thermal motion in proteins: Large effects on the time-averaged interaction energies

    Science.gov (United States)

    Goethe, Martin; Fita, Ignacio; Rubi, J. Miguel

    2016-03-01

    As a consequence of thermal motion, inter-atomic distances in proteins fluctuate strongly around their average values, and hence, also interaction energies (i.e. the pair-potentials evaluated at the fluctuating distances) are not constant in time but exhibit pronounced fluctuations. These fluctuations cause that time-averaged interaction energies do generally not coincide with the energy values obtained by evaluating the pair-potentials at the average distances. More precisely, time-averaged interaction energies behave typically smoother in terms of the average distance than the corresponding pair-potentials. This averaging effect is referred to as the thermal smoothing effect. Here, we estimate the strength of the thermal smoothing effect on the Lennard-Jones pair-potential for globular proteins at ambient conditions using x-ray diffraction and simulation data of a representative set of proteins. For specific atom species, we find a significant smoothing effect where the time-averaged interaction energy of a single atom pair can differ by various tens of cal/mol from the Lennard-Jones potential at the average distance. Importantly, we observe a dependency of the effect on the local environment of the involved atoms. The effect is typically weaker for bulky backbone atoms in beta sheets than for side-chain atoms belonging to other secondary structure on the surface of the protein. The results of this work have important practical implications for protein software relying on free energy expressions. We show that the accuracy of free energy expressions can largely be increased by introducing environment specific Lennard-Jones parameters accounting for the fact that the typical thermal motion of protein atoms depends strongly on their local environment.

  6. Thermal motion in proteins: Large effects on the time-averaged interaction energies

    Energy Technology Data Exchange (ETDEWEB)

    Goethe, Martin, E-mail: martingoethe@ub.edu; Rubi, J. Miguel [Departament de Física Fonamental, Universitat de Barcelona, Martí i Franquès 1, 08028 Barcelona (Spain); Fita, Ignacio [Institut de Biologia Molecular de Barcelona, Baldiri Reixac 10, 08028 Barcelona (Spain)

    2016-03-15

    As a consequence of thermal motion, inter-atomic distances in proteins fluctuate strongly around their average values, and hence, also interaction energies (i.e. the pair-potentials evaluated at the fluctuating distances) are not constant in time but exhibit pronounced fluctuations. These fluctuations cause that time-averaged interaction energies do generally not coincide with the energy values obtained by evaluating the pair-potentials at the average distances. More precisely, time-averaged interaction energies behave typically smoother in terms of the average distance than the corresponding pair-potentials. This averaging effect is referred to as the thermal smoothing effect. Here, we estimate the strength of the thermal smoothing effect on the Lennard-Jones pair-potential for globular proteins at ambient conditions using x-ray diffraction and simulation data of a representative set of proteins. For specific atom species, we find a significant smoothing effect where the time-averaged interaction energy of a single atom pair can differ by various tens of cal/mol from the Lennard-Jones potential at the average distance. Importantly, we observe a dependency of the effect on the local environment of the involved atoms. The effect is typically weaker for bulky backbone atoms in beta sheets than for side-chain atoms belonging to other secondary structure on the surface of the protein. The results of this work have important practical implications for protein software relying on free energy expressions. We show that the accuracy of free energy expressions can largely be increased by introducing environment specific Lennard-Jones parameters accounting for the fact that the typical thermal motion of protein atoms depends strongly on their local environment.

  7. Partonic Energy Loss and the Drell-Yan Process

    OpenAIRE

    2002-01-01

    We examine the current status of the extraction of the rate of partonic energy loss in nuclei from A dependent data. The advantages and difficulties of using the Drell-Yan process to measure the energy loss of a parton traversing a cold nuclear medium are discussed. The prospects of using relatively low energy proton beams for a definitive measurement of partonic energy loss are presented.

  8. Energy losses of superconducting power transmission cables in the grid

    DEFF Research Database (Denmark)

    Østergaard, Jacob; Okholm, Jan; Lomholt, Karin

    2001-01-01

    One of the obvious motives for development of superconducting power transmission cables is reduction of transmission losses. Loss components in superconducting cables as well as in conventional cables have been examined. These losses are used for calculating the total energy losses of conventional...... as well as superconducting cables when they are placed in the electric power transmission network. It is concluded that high load connections are necessary to obtain energy saving by the use of HTSC cables. For selected high load connections, an energy saving of 40% is expected. It is shown...... that the thermal insulation and cooling machine efficiency are the most important loss element in a superconducting cable system...

  9. Average Consensus in Multiagent Systems with the Problem of Packet Losses When Using the Second-Order Neighbors’ Information

    Directory of Open Access Journals (Sweden)

    Mei Yu

    2014-01-01

    Full Text Available This paper mainly investigates the average consensus of multiagent systems with the problem of packet losses when both the first-order neighbors’ information and the second-order neighbors’ information are used. The problem is formulated under the sampled-data framework by discretizing the first-order agent dynamics with a zero-order hold. The communication graph is undirected and the loss of data across each communication link occurs at certain probability, which is governed by a Bernoulli process. It is found that the distributed average consensus speeds up by using the second-order neighbors’ information when packets are lost. Numerical examples are given to demonstrate the effectiveness of the proposed methods.

  10. Energy and average power scalable optical parametric chirped-pulse amplification in yttrium calcium oxyborate.

    Science.gov (United States)

    Liao, Zhi M; Jovanovic, Igor; Ebbers, Chris A; Fei, Yiting; Chai, Bruce

    2006-05-01

    Optical parametric chirped-pulse amplification (OPCPA) in nonlinear crystals has the potential to produce extremes of peak and average power but is limited either in energy by crystal growth issues or in average power by crystal thermo-optic characteristics. Recently, large (7.5 cm diameter x 25 cm length) crystals of yttrium calcium oxyborate (YCOB) have been grown and utilized for high-average-power second-harmonic generation. Further, YCOB has the necessary thermo-optic properties required for scaling OPCPA systems to high peak and average power operation for wavelengths near 1 microm. We report what is believed to be the first use of YCOB for OPCPA. Scalability to higher peak and average power is addressed.

  11. Diode-Pumped High Energy and High Average Power All-Solid-State Picosecond Amplifier Systems

    OpenAIRE

    Jiaxing Liu; Wei Wang; Zhaohua Wang; Zhiguo Lv; Zhiyuan Zhang; Zhiyi Wei

    2015-01-01

    We present our research on the high energy picosecond laser operating at a repetition rate of 1 kHz and the high average power picosecond laser running at 100 kHz based on bulk Nd-doped crystals. With diode-pumped solid state (DPSS) hybrid amplifiers consisting of a picosecond oscillator, a regenerative amplifier, end-pumped single-pass amplifiers, and a side-pumped amplifier, an output energy of 64.8 mJ at a repetition rate of 1 kHz was achieved. An average power of 37.5 W at a repetition ra...

  12. Low-loss energy storage flywheel

    Science.gov (United States)

    Evans, H. E.; Studer, P. A.

    1977-01-01

    Magnetically-levitated, ironless-armature spokeless rotor is used. Ironless armature construction eliminates core losses due to hysteresis and eddy currents. Device combines features of homopolar salient poles and stationary ironless electronically commutated armature.

  13. Energy loss correction for a crystal calorimeter

    Institute of Scientific and Technical Information of China (English)

    HE Miao; LI Hai-Bo; LI Wei-Dong; LIU Chun-Xiu; LIU Huai-Min; MA Qiu-Mei; MA Xiang; MAO Ya-Jun; MAO Ze-Pu; MO Xiao-Hu; QIU Jin-Fa; WANG Yi-Fang; SUN Sheng-Sen; SUN Yong-Zhao; WANG Ji-Ke; WANG Liang-Liang; WEN Shuo-Pin; WU Ling-Hui; XIE Yu-Guang; YANG Ming; YOU Zheng-Yun; YU Guo-Wei; BIAN Jian-Ming; YUAN Chang-Zheng; YUAN Ye; ZANG Shi-Lei; ZHANG Chang-Chun; ZHANG Jian-Yong; ZHANG Ling; ZHANG Xue-Yao; ZHANG Yao; ZHENG Zhi-Peng; ZHU Yong-Sheng; CAO Guo-Fu; ZOU Jia-Heng; DENG Zi-Yan; HE Kang-Lin; HUANG Bin; JI Xiao-Bin; LI Gang

    2008-01-01

    Material effect of inner-detectors on the performances of the BESⅢ Electromagnetic Calorimeter (EMC)is investigated.The BESⅢ Time-Of-Flight counters(TOF)have been utilized to improve the energy resolution and detection efficiency for photons after a careful energy calibration.A matching algorithm between TOF and EMC energy deposits is developed,and the effects of beam-related background are discussed.The energy resolution is improved and the photon detection efficiency can be increased by the combined measurement of EMC and TOF detectors.

  14. Active cooling of pulse compression diffraction gratings for high energy, high average power ultrafast lasers.

    Science.gov (United States)

    Alessi, David A; Rosso, Paul A; Nguyen, Hoang T; Aasen, Michael D; Britten, Jerald A; Haefner, Constantin

    2016-12-26

    Laser energy absorption and subsequent heat removal from diffraction gratings in chirped pulse compressors poses a significant challenge in high repetition rate, high peak power laser development. In order to understand the average power limitations, we have modeled the time-resolved thermo-mechanical properties of current and advanced diffraction gratings. We have also developed and demonstrated a technique of actively cooling Petawatt scale, gold compressor gratings to operate at 600W of average power - a 15x increase over the highest average power petawatt laser currently in operation. Combining this technique with low absorption multilayer dielectric gratings developed in our group would enable pulse compressors for petawatt peak power lasers operating at average powers well above 40kW.

  15. Collisional Energy Loss of Non Asymptotic Jets in a QGP

    CERN Document Server

    Adil, A; Horowitz, W A; Wicks, S

    2006-01-01

    We calculate the collisional energy loss suffered by a heavy (charm) quark created at a finite time within a Quark Gluon Plasma (QGP) in the classical linear response formalism. We pay close attention to the problem of formulating a conserved current and accounting for binding and radiative energy loss effects. We find that the finite time correction is on the order of a Debye length as expected and the overall energy loss is similar in magnitude to the energy loss suffered by a charge created in the asymptotic past. This result has significant implications for the relative contribution to energy loss from collisional and radiative sources and will have ramifications for the ``single electron puzzle'' at RHIC as well as other experimental observables.

  16. Average Throughput Performance of Myopic Policy in Energy Harvesting Wireless Sensor Networks.

    Science.gov (United States)

    Gul, Omer Melih; Demirekler, Mubeccel

    2017-09-26

    This paper considers a single-hop wireless sensor network where a fusion center collects data from M energy harvesting wireless sensors. The harvested energy is stored losslessly in an infinite-capacity battery at each sensor. In each time slot, the fusion center schedules K sensors for data transmission over K orthogonal channels. The fusion center does not have direct knowledge on the battery states of sensors, or the statistics of their energy harvesting processes. The fusion center only has information of the outcomes of previous transmission attempts. It is assumed that the sensors are data backlogged, there is no battery leakage and the communication is error-free. An energy harvesting sensor can transmit data to the fusion center whenever being scheduled only if it has enough energy for data transmission. We investigate average throughput of Round-Robin type myopic policy both analytically and numerically under an average reward (throughput) criterion. We show that Round-Robin type myopic policy achieves optimality for some class of energy harvesting processes although it is suboptimal for a broad class of energy harvesting processes.

  17. The electron energy loss rate due to radiative recombination

    Science.gov (United States)

    Mao, Junjie; Kaastra, Jelle; Badnell, N. R.

    2017-02-01

    Context. For photoionized plasmas, electron energy loss rates due to radiative recombination (RR) are required for thermal equilibrium calculations, which assume a local balance between the energy gain and loss. While many calculations of total and/or partial RR rates are available from the literature, specific calculations of associated RR electron energy loss rates are lacking. Aims: Here we focus on electron energy loss rates due to radiative recombination of H-like to Ne-like ions for all the elements up to and including zinc (Z = 30), over a wide temperature range. Methods: We used the AUTOSTRUCTURE code to calculate the level-resolved photoionization cross section and modify the ADASRR code so that we can simultaneously obtain level-resolved RR rate coefficients and associated RR electron energy loss rate coefficients. We compared the total RR rates and electron energy loss rates of H i and He i with those found in the literature. Furthermore, we utilized and parameterized the weighted electron energy loss factors (dimensionless) to characterize total electron energy loss rates due to RR. Results: The RR electron energy loss data are archived according to the Atomic Data and Analysis Structure (ADAS) data class adf48. The RR electron energy loss data are also incorporated into the SPEX code for detailed modeling of photoionized plamsas. Full Tables 1 and 2 are available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/599/A10

  18. Estimating Energy Conversion Efficiency of Thermoelectric Materials: Constant Property Versus Average Property Models

    Science.gov (United States)

    Armstrong, Hannah; Boese, Matthew; Carmichael, Cody; Dimich, Hannah; Seay, Dylan; Sheppard, Nathan; Beekman, Matt

    2017-01-01

    Maximum thermoelectric energy conversion efficiencies are calculated using the conventional "constant property" model and the recently proposed "cumulative/average property" model (Kim et al. in Proc Natl Acad Sci USA 112:8205, 2015) for 18 high-performance thermoelectric materials. We find that the constant property model generally predicts higher energy conversion efficiency for nearly all materials and temperature differences studied. Although significant deviations are observed in some cases, on average the constant property model predicts an efficiency that is a factor of 1.16 larger than that predicted by the average property model, with even lower deviations for temperature differences typical of energy harvesting applications. Based on our analysis, we conclude that the conventional dimensionless figure of merit ZT obtained from the constant property model, while not applicable for some materials with strongly temperature-dependent thermoelectric properties, remains a simple yet useful metric for initial evaluation and/or comparison of thermoelectric materials, provided the ZT at the average temperature of projected operation, not the peak ZT, is used.

  19. Energy loss in grazing proton-surface collisions

    Energy Technology Data Exchange (ETDEWEB)

    Juaristi, J.I. (Dept. Fisica de Materiales, Facultad de Quimicas, UPV/EHU, San Sebastian (Spain)); Garcia de Abajo, F.J. (Dept. Ciencias de la Computacion e Inteligencia Artificial, Facultad de Informatica, UPV/EHU, San Sebastian (Spain))

    1994-05-01

    The energy loss of fast protons, with energy E > 100 keV, specularly reflected on a solid surface with glancing angle of incidence of the order of a mrad is analysed on theoretical grounds. Two different contributions can be distinguished: (i) energy losses originating from the interaction with the valence band, accounted for through an induced force, and (ii) the excitation of electron bound states of the target atoms. The results are compared with available experimental data. (orig.)

  20. Estimation of Annual Average Soil Loss, Based on Rusle Model in Kallar Watershed, Bhavani Basin, Tamil Nadu, India

    Science.gov (United States)

    Rahaman, S. Abdul; Aruchamy, S.; Jegankumar, R.; Ajeez, S. Abdul

    2015-10-01

    Soil erosion is a widespread environmental challenge faced in Kallar watershed nowadays. Erosion is defined as the movement of soil by water and wind, and it occurs in Kallar watershed under a wide range of land uses. Erosion by water can be dramatic during storm events, resulting in wash-outs and gullies. It can also be insidious, occurring as sheet and rill erosion during heavy rains. Most of the soil lost by water erosion is by the processes of sheet and rill erosion. Land degradation and subsequent soil erosion and sedimentation play a significant role in impairing water resources within sub watersheds, watersheds and basins. Using conventional methods to assess soil erosion risk is expensive and time consuming. A comprehensive methodology that integrates Remote sensing and Geographic Information Systems (GIS), coupled with the use of an empirical model (Revised Universal Soil Loss Equation- RUSLE) to assess risk, can identify and assess soil erosion potential and estimate the value of soil loss. GIS data layers including, rainfall erosivity (R), soil erodability (K), slope length and steepness (LS), cover management (C) and conservation practice (P) factors were computed to determine their effects on average annual soil loss in the study area. The final map of annual soil erosion shows a maximum soil loss of 398.58 t/ h-1/ y-1. Based on the result soil erosion was classified in to soil erosion severity map with five classes, very low, low, moderate, high and critical respectively. Further RUSLE factors has been broken into two categories, soil erosion susceptibility (A=RKLS), and soil erosion hazard (A=RKLSCP) have been computed. It is understood that functions of C and P are factors that can be controlled and thus can greatly reduce soil loss through management and conservational measures.

  1. Torque model of hydro turbine with inner energy loss characteristics

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper presents the result and analysis of the composition of energy loss occurring in the hydro turbine. Two new types of energy losses,namely the hydraulic loss in the flow channel and the impact loss,are defined. All losses within the hydro turbine are divided into four types and the loss coefficients are defined accordingly. Expressions or characteristic descriptions of these losses as well as the calibration method of the loss coefficients are presented. Furthermore,the torque model of the hydro turbine where the inner energy loss takes place is established. The developed model has been used to calculate the power loss due to the mechanical friction generated by the units’ rotation to solve the difficulty of measurements of the mechanical friction loss in the hydro turbine. The definition of the impact loss explains the phenomenon that the loss of no-load is greater than that of the rated operation. A set of conversion coefficients are defined using the characteristic parameters at the rated operation,which are used to transform the parameters in the torque model into those that are easily measured. Therefore,the expression of the hydro turbine power is converted into a function that has the main servomotor displacement as its single variable. This makes the proposed model be convenient to use. Finally,the proposed model and methods are calibrated and verified using the measured data of a hydropower plant. Good agreement between the modeled results and the measurements indicates that the proposed model can represent the inner energy loss characteristics of the hydro turbine.

  2. Characteristic energy losses of electrons in organic NTCDA-films

    CERN Document Server

    Komolov, S A; Sidorenko, A G; Alyaev, Y G; Novolodskij, V A

    2001-01-01

    The studies on the characteristic energy losses of slow electrons in the NTCDA thin film on the ZnO (0001) surface are presented. It is shown, that the spectrum of the energy losses (E sub p =4.0; 5.6; 12.5 and 14.5 eV) in the area of low energies (< 60 eV) reflects the structure of transitions between the valency zone and the conductivity zone. The energy losses on the plasma oscillations excitation the excitation of pi-plasmon with the energy of 6.5 eV and excitation of the pi-sigma plasmon with the energy of 25 eV become prevailing with the growth of the initial electrons energy

  3. Bayesian Model Averaging for Ensemble-Based Estimates of Solvation Free Energies

    CERN Document Server

    Gosink, Luke J; Reehl, Sarah M; Whitney, Paul D; Mobley, David L; Baker, Nathan A

    2016-01-01

    This paper applies the Bayesian Model Averaging (BMA) statistical ensemble technique to estimate small molecule solvation free energies. There is a wide range methods for predicting solvation free energies, ranging from empirical statistical models to ab initio quantum mechanical approaches. Each of these methods are based on a set of conceptual assumptions that can affect a method's predictive accuracy and transferability. Using an iterative statistical process, we have selected and combined solvation energy estimates using an ensemble of 17 diverse methods from the SAMPL4 blind prediction study to form a single, aggregated solvation energy estimate. The ensemble design process evaluates the statistical information in each individual method as well as the performance of the aggregate estimate obtained from the ensemble as a whole. Methods that possess minimal or redundant information are pruned from the ensemble and the evaluation process repeats until aggregate predictive performance can no longer be improv...

  4. Diode-Pumped High Energy and High Average Power All-Solid-State Picosecond Amplifier Systems

    Directory of Open Access Journals (Sweden)

    Jiaxing Liu

    2015-12-01

    Full Text Available We present our research on the high energy picosecond laser operating at a repetition rate of 1 kHz and the high average power picosecond laser running at 100 kHz based on bulk Nd-doped crystals. With diode-pumped solid state (DPSS hybrid amplifiers consisting of a picosecond oscillator, a regenerative amplifier, end-pumped single-pass amplifiers, and a side-pumped amplifier, an output energy of 64.8 mJ at a repetition rate of 1 kHz was achieved. An average power of 37.5 W at a repetition rate of 100 kHz pumped by continuous wave laser diodes was obtained. Compact, stable and high power DPSS laser amplifier systems with good beam qualities are excellent picosecond sources for high power optical parametric chirped pulse amplification (OPCPA and high-efficiency laser processing.

  5. Mesospheric energy loss rates by OH and O2 emissions at 23°S

    Directory of Open Access Journals (Sweden)

    H. Takahashi

    Full Text Available The nightglow OH(9, 4 and O2 atmospheric (0,1 band emission intensities and their rotational temperatures T(OH and T(O2, respectively, observed at Cachoeira Paulista (23°S, 45°W, Brazil, during the period from October 1989 to December 1990, have been analyzed to study the nighttime mesospheric energy loss rates through the radiations from the vibrationally excited OH* and electronically excited O2* bands. The total emission rates of the OH Meinel bands, O2 atmospheric (0,0 and O2 infrared atmospheric (1Δg bands were calculated using reported data for the relative band intensities I(ν'',ν'/I(9,4, IO2A(0,0/IO2A(0,1 and IO2(1Δg/IO2A(0,1. It was found that there is a minimum in equivalent energy loss rate by the OH* Meinel bands during December/January (equivalent energy loss rate of 0.39K/day*, where day* means averaged over the night and maximum in equivalent energy loss rate during September (equivalent energy loss rate of 0.98K/day*. Energy loss rate by the O2* radiation, on the other hand, is weaker than that by the OH* Meinel bands, showing equivalent energy loss rates of 0.12K/day* and 0.22K/day* during January and September, respectively.

  6. An investigation of standby energy losses in residential sector: Solutions and policies

    Energy Technology Data Exchange (ETDEWEB)

    Singh Solanki, Parmal [Caledonian (University) College of Engineering, Muscat (Oman); Sarma Mallela, Venkateswara [G. Narayanamma Institute of Technology and Science (for Women), Hyderabad (India); Zhou, Chengke [Glasgow Caledonian University, Glasgow, Scotland (United Kingdom)

    2013-07-01

    This paper investigates the standby power losses of household appliances and determines these losses by field measurements and bottom-up approaches. It is revealed that average standby power losses of e-appliances at household in Oman is 103.4 Watts and could further increase if other miscellaneous appliances are also taken into account. Calculations show that TV sets alone are responsible to consume 1.89 MW standby powers across the country. The paper considers various technological and socio-economic options to diminish the standby power consumption and signify that 42.72% of energy consumed by appliances can be saved by end-users implementing suitable measures. Energy management programmes like energy efficiency standards, labelling and policy instruments to tackle the standby power losses are also discussed. Finally, paper looks into the barriers and their way-outs to implement the energy efficiency standards and labelling.

  7. Energy Loss in Pulse Detonation Engine due to Fuel Viscosity

    Directory of Open Access Journals (Sweden)

    Weipeng Hu

    2014-01-01

    Full Text Available Fluid viscosity is a significant factor resulting in the energy loss in most fluid dynamical systems. To analyze the energy loss in the pulse detonation engine (PDE due to the viscosity of the fuel, the energy loss in the Burgers model excited by periodic impulses is investigated based on the generalized multisymplectic method in this paper. Firstly, the single detonation energy is simplified as an impulse; thus the complex detonation process is simplified. And then, the symmetry of the Burgers model excited by periodic impulses is studied in the generalized multisymplectic framework and the energy loss expression is obtained. Finally, the energy loss in the Burgers model is investigated numerically. The results in this paper can be used to explain the difference between the theoretical performance and the experimental performance of the PDE partly. In addition, the analytical approach of this paper can be extended to the analysis of the energy loss in other fluid dynamic systems due to the fluid viscosity.

  8. Integrating the flexibility of the average Serbian consumer as a virtual storage option into the planning of energy systems

    Directory of Open Access Journals (Sweden)

    Batas-Bjelić Ilija R.

    2014-01-01

    Full Text Available With the integration of more variable renewable energy, the need for storage is growing. Rather than utility scale storage, smart grid technology (not restricted, but mainly involving bidirectional communication between the supply and demand side and dynamic pricing enables flexible consumption to be a virtual storage alternative for moderation of the production of variable renewable energy sources on the micro grid level. A study, motivated with energy loss allocation, electric demand and the legal framework that is characteristic for the average Serbian household, was performed using the HOMER software tool. The decision to shift or build deferrable load rather than sell on site generated energy from variable renewable energy sources to the grid was based on the consumer's net present cost minimization. Based on decreasing the grid sales hours of the micro grid system to the transmission grid from 3,498 to 2,009, it was shown that the demand response could be included in long-term planning of the virtual storage option. Demand responsive actions that could be interpreted as storage investment costs were quantified to 1€2 per year in this article. [Projekat Ministarstva nauke Republike Srbije, br. 42009: Smart grid

  9. Violation of the averaged null energy condition in semiclassical black-hole evaporation

    CERN Document Server

    Levi, Adam

    2016-01-01

    We report here on a new method for calculating the renormalized stress-energy tensor (RSET) in black-hole (BH) spacetimes, which should be applicable to dynamical BHs as well. We used this method to calculate the RSET of a massless, minimally coupled scalar field in Schwarzschild and Reissner-Nordstrom backgrounds, for several quantum states. We present here the results for the RSET in the Schwarzschild case in Unruh state (the state describing BH evaporation). The RSET is type I at weak field, and becomes type IV at $r\\lesssim2.78M$. Then we use the RSET results to explore violation of the weak and null Energy conditions. We find that both conditions are violated all the way from $r\\simeq4.9M$ to the horizon. We also find that the averaged weak energy condition is violated by a class of (unstable) circular timelike geodesics. Most remarkably, the circular null geodesic at $r=3M$ is found to violate the averaged null energy condition (ANEC). To the best of our knowledge this is the first demonstration of ANEC...

  10. Bremsstrahlung Energy Losses for Cosmic Ray Electrons and Positrons

    CERN Document Server

    Widom, A; Srivastava, R

    2015-01-01

    Recently cosmic ray electrons and positrons, i.e. cosmic ray charged leptons, have been observed. To understand the distances from our solar system to the sources of such lepton cosmic rays, it is important to understand energy losses from cosmic electrodynamic fields. Energy losses for ultra-relativistic electrons and/or positrons due to classical electrodynamic bremsstrahlung are computed. The energy losses considered are (i) due to Thompson scattering from fluctuating electromagnetic fields in the background cosmic thermal black body radiation and (ii) due to the synchrotron radiation losses from quasi-static domains of cosmic magnetic fields. For distances to sources of galactic length proportions, the lepton cosmic ray energy must be lass than about a TeV.

  11. Single-atom electron energy loss spectroscopy of light elements

    National Research Council Canada - National Science Library

    Senga, Ryosuke; Suenaga, Kazu

    2015-01-01

    ... scattering power and higher knock-on probability. Here we propose a concept for detecting light atoms encaged in a nanospace by means of electron energy loss spectroscopy using inelastically scattered electrons...

  12. On the use of energy loss mechanisms to constrain Lorentz invariance violations

    CERN Document Server

    Mazón, Diego

    2014-01-01

    In light of recent and probably incoming observations of very high energy astroparticles, such as those reported by the IceCube collaboration, we readdress the energy loss mechanism by Lorentz violating particles. We analytically show that Cohen-Glashow's formula for energy loss is connected with a Poisson distribution for the number of decays, whose large fluctuations prevent from placing bounds on Lorentz invariance violations. However, this model ignores the sharp change in the decay width after each process. We propose replacing Poisson statistics with a new distribution that takes this into account. We study the average final energy and its fluctuations according to the new statistics, contrasting it with Cohen-Glashow's result and discussing the reliability of energy loss mechanisms to constrain violations of Lorentz invariance.

  13. Energy averages and fluctuations in the decay out of superdeformed bands

    CERN Document Server

    Sargeant, A J; Pato, M P; Ueda, M

    2002-01-01

    We derive analytic formulae for the energy average (including the energy average of the fluctuation contribution) and variance of the intraband decay intensity of a superdeformed band. Our results may be expressed in terms of three dimensionless variables: $\\Gamma^{\\downarrow}/\\Gamma_S$, $\\Gamma_N/d$, and $\\Gamma_N/(\\Gamma_S+\\Gamma^{\\downarrow})$. Here $\\Gamma^{\\downarrow}$ is the spreading width for the mixing of a superdeformed (SD) state $|0>$ with the normally deformed (ND) states $|Q>$ whose spin is the same as $|0>$'s. The $|Q>$ have mean level spacing $d$ and mean electromagnetic decay width $\\Gamma_N$ whilst $|0>$ has electromagnetic decay width $\\Gamma_S$. The average decay intensity may be expressed solely in terms of the variables $\\Gamma^{\\downarrow}/\\Gamma_S$ and $\\Gamma_N/d$ or, analogously to statistical nuclear reaction theory, in terms of the transmission coefficients $T_0(E)$ and $T_N$ describing transmission from the $|Q>$ to the SD band via $|0\\angle$ and to lower ND states. The variance o...

  14. Radiative energy loss of neighboring subjets arXiv

    CERN Document Server

    Mehtar-Tani, Yacine

    We compute the in-medium energy loss probability distribution of two neighboring subjets at leading order, in the large-$N_c$ approximation. Our result exhibits a gradual onset of color decoherence of the system and accounts for two expected limiting cases. When the angular separation is smaller than the characteristic angle for medium-induced radiation, the two-pronged substructure lose energy coherently as a single color charge, namely that of the parent parton. At large angular separation the two subjets lose energy independently. Our result is a first step towards quantifying effects of energy loss as a result of the fluctuation of the multi-parton jet substructure and therefore goes beyond the standard approach to jet quenching based on single parton energy loss. We briefly discuss applications to jet observables in heavy-ion collisions.

  15. A simple method for realistic estimation of the most probable energy loss in thin gas layers

    Science.gov (United States)

    Grishin, V. M.; Merson, G. I.

    1989-01-01

    A simple method for the estimation of the relativistic rise of the most probable ionisation loss in thin gas layers is suggested. The method is based on the similarity of the most probable and restricted energy loss of relativistic charged particles in matter. This allows to correct the Landau-Sternheimer theory taking into account the fact that particle collisions with internal atomic electrons do not influence the most probable value of the ionisation loss. The effective values of the charge number and average ionisation potential which are simple to calculate are used for this correction. A similarity of the energy loss distributions for various gases and gas layers is found. This similarity is expressed in a constant fraction of the ionisation loss distribution tail area ( ˜ 1:3.5). It is the value which was used for correction of the Landau-Sternheimer formula.

  16. Tailoring the energy distribution and loss of 2D plasmons

    CERN Document Server

    Lin, Xiao; López, Josué J; Kaminer, Ido; Chen, Hongsheng; Soljačić, Marin

    2016-01-01

    The ability to tailor the energy distribution of plasmons at the nanoscale has many applications in nanophotonics, such as designing plasmon lasers, spasers, and quantum emitters. To this end, we analytically study the energy distribution and the proper field quantization of 2D plasmons with specific examples for graphene plasmons. We find that the portion of the plasmon energy contained inside graphene (energy confinement factor) can exceed 50%, despite graphene being infinitely thin. In fact, this very high energy confinement can make it challenging to tailor the energy distribution of graphene plasmons just by modifying the surrounding dielectric environment or the geometry, such as changing the separation distance between two coupled graphene layers. However, by adopting concepts of parity-time symmetry breaking, we show that tuning the loss in one of the two coupled graphene layers can simultaneously tailor the energy confinement factor and propagation characteristics, causing the phenomenon of loss-indu...

  17. Tailoring the energy distribution and loss of 2D plasmons

    Science.gov (United States)

    Lin, Xiao; Rivera, Nicholas; López, Josué J.; Kaminer, Ido; Chen, Hongsheng; Soljačić, Marin

    2016-10-01

    The ability to tailor the energy distribution of plasmons at the nanoscale has many applications in nanophotonics, such as designing plasmon lasers, spasers, and quantum emitters. To this end, we analytically study the energy distribution and the proper field quantization of 2D plasmons with specific examples for graphene plasmons. We find that the portion of the plasmon energy contained inside graphene (energy confinement factor) can exceed 50%, despite graphene being infinitely thin. In fact, this very high energy confinement can make it challenging to tailor the energy distribution of graphene plasmons just by modifying the surrounding dielectric environment or the geometry, such as changing the separation distance between two coupled graphene layers. However, by adopting concepts of parity-time symmetry breaking, we show that tuning the loss in one of the two coupled graphene layers can simultaneously tailor the energy confinement factor and propagation characteristics, causing the phenomenon of loss-induced plasmonic transparency.

  18. An improved label propagation algorithm using average node energy in complex networks

    Science.gov (United States)

    Peng, Hao; Zhao, Dandan; Li, Lin; Lu, Jianfeng; Han, Jianmin; Wu, Songyang

    2016-10-01

    Detecting overlapping community structure can give a significant insight into structural and functional properties in complex networks. In this Letter, we propose an improved label propagation algorithm (LPA) to uncover overlapping community structure. After mapping nodes into random variables, the algorithm calculates variance of each node and the proposed average node energy. The nodes whose variances are less than a tunable threshold are regarded as bridge nodes and meanwhile changing the given threshold can uncover some latent bridge node. Simulation results in real-world and artificial networks show that the improved algorithm is efficient in revealing overlapping community structures.

  19. Heat Loss Experiments: Teach Energy Savings with Cardboard "House"

    Science.gov (United States)

    Roman, Harry T.

    2011-01-01

    Using two cardboard boxes, a light bulb socket, light bulbs of varying wattage, a thermometer, and some insulation, students can learn some interesting lessons about how heat loss occurs in homes. This article describes practical experiments that work well on units related to energy, sustainable energy, renewables, engineering, and construction.…

  20. The energy loss of medium-energy He+ ions backscattered from a Cu(100) surface

    NARCIS (Netherlands)

    Alkemade, P.F.A.; Turkenburg, W.C.; Weg, W.F. van der

    1987-01-01

    A model is presented for the shape of the surface peak in the energy spectrum of backscattered ions in a channeling and blocking experiment. The elastic energy loss distribution of the ions is calculated by use of Monte Carlo simulation. The inelastic energy loss distribution is calculated by use of

  1. Proving the Achronal Averaged Null Energy Condition from the Generalized Second Law

    CERN Document Server

    Wall, Aron C

    2009-01-01

    A null line is a complete achronal null geodesic. It is proven that for any quantum fields minimally coupled to semiclassical Einstein gravity, the averaged null energy condition (ANEC) on null lines is a consequence of the generalized second law of thermodynamics for causal horizons. Auxiliary assumptions include CPT and the existence of a suitable renormalization scheme for the generalized entropy. Although the ANEC can be violated on general geodesics in curved spacetimes, as long as the ANEC holds on null lines there exist theorems showing that semiclassical gravity should satisfy positivity of energy, topological censorship, and should not admit closed timelike curves. It is pointed out that these theorems fail once the linearized graviton field is quantized, because then the renormalized shear squared term in the Raychaudhuri equation can be negative. A "shear-inclusive" generalization of the ANEC is proposed to remedy this, and is proven under an additional assumption about perturbations to horizons in...

  2. The Mercury Project: A High Average Power, Gas-Cooled Laser For Inertial Fusion Energy Development

    Energy Technology Data Exchange (ETDEWEB)

    Bayramian, A; Armstrong, P; Ault, E; Beach, R; Bibeau, C; Caird, J; Campbell, R; Chai, B; Dawson, J; Ebbers, C; Erlandson, A; Fei, Y; Freitas, B; Kent, R; Liao, Z; Ladran, T; Menapace, J; Molander, B; Payne, S; Peterson, N; Randles, M; Schaffers, K; Sutton, S; Tassano, J; Telford, S; Utterback, E

    2006-11-03

    Hundred-joule, kilowatt-class lasers based on diode-pumped solid-state technologies, are being developed worldwide for laser-plasma interactions and as prototypes for fusion energy drivers. The goal of the Mercury Laser Project is to develop key technologies within an architectural framework that demonstrates basic building blocks for scaling to larger multi-kilojoule systems for inertial fusion energy (IFE) applications. Mercury has requirements that include: scalability to IFE beamlines, 10 Hz repetition rate, high efficiency, and 10{sup 9} shot reliability. The Mercury laser has operated continuously for several hours at 55 J and 10 Hz with fourteen 4 x 6 cm{sup 2} ytterbium doped strontium fluoroapatite (Yb:S-FAP) amplifier slabs pumped by eight 100 kW diode arrays. The 1047 nm fundamental wavelength was converted to 523 nm at 160 W average power with 73% conversion efficiency using yttrium calcium oxy-borate (YCOB).

  3. Dynamic Average-Value Modeling of Doubly-Fed Induction Generator Wind Energy Conversion Systems

    Science.gov (United States)

    Shahab, Azin

    In a Doubly-fed Induction Generator (DFIG) wind energy conversion system, the rotor of a wound rotor induction generator is connected to the grid via a partial scale ac/ac power electronic converter which controls the rotor frequency and speed. In this research, detailed models of the DFIG wind energy conversion system with Sinusoidal Pulse-Width Modulation (SPWM) scheme and Optimal Pulse-Width Modulation (OPWM) scheme for the power electronic converter are developed in detail in PSCAD/EMTDC. As the computer simulation using the detailed models tends to be computationally extensive, time consuming and even sometimes not practical in terms of speed, two modified approaches (switching-function modeling and average-value modeling) are proposed to reduce the simulation execution time. The results demonstrate that the two proposed approaches reduce the simulation execution time while the simulation results remain close to those obtained using the detailed model simulation.

  4. Holographic energy loss in non-relativistic backgrounds

    CERN Document Server

    Atashi, Mahdi; Farahbodnia, Mitra

    2016-01-01

    In this paper, we study some aspects of energy loss in non-relativistic theories from holography. We analyze the energy lost by a rotating heavy point particle along a circle of radius $l$ with angular velocity $\\omega$ in theories with general dynamical exponent $z$ and hyperscaling violation exponent $\\theta$. It is shown that this problem provides a novel perspective on the energy loss in such theories. A general computation at zero and finite temperature is done and it is shown that how the total energy loss rate depends non-trivially on two characteristic exponents $(z,\\theta)$. We find that at zero temperature there is a special radius $l_c$ where the energy loss is independent of different values of $(z,\\theta)$. Also, there is a crossover between a regime in which the energy loss is dominated by the linear drag force and by the radiation because of the acceleration of the rotating particle. We discover different behaviors at finite temperature case.

  5. The effect of the averaged structural and energetic features on the cohesive energy of nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Safaei, A., E-mail: ali.safaiy@gmail.co [Institute of Nano-Parthava (Iran, Islamic Republic of)

    2010-03-15

    The size dependency of the cohesive energy of nanocrystals is obtained in terms of their averaged structural and energetic properties, which are in direct proportion with their cohesive energies. The significance of the effect of the geometrical shape of nanoparticles on their thermal stability has been discussed. The model has been found to have good prediction for the case of Cu and Al nanoparticles, with sizes in the ranges of 1-22 nm and 2-22 nm, respectively. Defining a new parameter, named as the surface-to-volume energy-contribution ratio, the relative thermal stabilities of different nanoclusters and their different surface-crystalline faces are discussed and compared to the molecular dynamic (MD) simulation results of copper nanoclusters. Finally, based on the size dependency of the cohesive energy, a formula for the size-dependent diffusion coefficient has been presented which includes the structural and energetic effects. Using this formula, the faster-than-expected interdiffusion/alloying of Au{sub (core)}-Ag{sub (shell)} nanoparticles with the core-shell structure, the Au-core diameter of 20 nm and the Ag-shell thickness of 2.91 nm, has been discussed and the calculated diffusion coefficient has been found to be consistent with its corresponding experimental value.

  6. Energy-Efficiency Options for Insurance Loss Prevention

    Energy Technology Data Exchange (ETDEWEB)

    Mills, E. [Ernest Orlando Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.; Knoepfel, I. [Swiss Reinsurance Co., Zurich (Switzerland)

    1997-06-09

    Energy-efficiency improvements offer the insurance industry two areas of opportunity: reducing ordinary claims and avoiding greenhouse gas emissions that could precipitate natural disaster losses resulting from global climate change. We present three vehicles for taking advantage of this opportunity, including research and development, in- house energy management, and provision of key information to insurance customers and risk managers. The complementary role for renewable energy systems is also introduced.

  7. Energy loss of low energy ion N+q grazing on the Al(111) surface

    Institute of Scientific and Technical Information of China (English)

    Hu Bi-Tao; Chen Chun-Hua; Song Yu-Shou; Gu Jian-Gang

    2007-01-01

    The total energy loss of N+q ions (for v < Bohr velocity) grazing on the Al(111) has been simulated without any 'fit' parameter and compared with the experimental data. The energy loss due to the charge exchange, happening before the N+q hits the Al(111) surface, is studied. The present simulation shows that the energy loss strongly depends on the charge state of the projectile and the lattice orientation of Al(111) surface. The calculated total energy loss agrees with experimental data very well.

  8. Dependence of bunch energy loss in cavities on beam velocity

    Science.gov (United States)

    Kurennoy, Sergey S.

    1999-03-01

    Beam energy loss in a cavity can be easily computed for a relativistic bunch using time-domain codes like MAFIA or ABCI. However, for nonrelativistic beams the problem is more complicated because of difficulties with its numerical formulation in the time domain. We calculate the cavity loss factors for a bunch in frequency domain as a function of its velocity and compare results with the relativistic case.

  9. Bound state potential energy surface construction: ab initio zero-point energies and vibrationally averaged rotational constants.

    Science.gov (United States)

    Bettens, Ryan P A

    2003-01-15

    Collins' method of interpolating a potential energy surface (PES) from quantum chemical calculations for reactive systems (Jordan, M. J. T.; Thompson, K. C.; Collins, M. A. J. Chem. Phys. 1995, 102, 5647. Thompson, K. C.; Jordan, M. J. T.; Collins, M. A. J. Chem. Phys. 1998, 108, 8302. Bettens, R. P. A.; Collins, M. A. J. Chem. Phys. 1999, 111, 816) has been applied to a bound state problem. The interpolation method has been combined for the first time with quantum diffusion Monte Carlo calculations to obtain an accurate ground state zero-point energy, the vibrationally average rotational constants, and the vibrationally averaged internal coordinates. In particular, the system studied was fluoromethane using a composite method approximating the QCISD(T)/6-311++G(2df,2p) level of theory. The approach adopted in this work (a) is fully automated, (b) is fully ab initio, (c) includes all nine nuclear degrees of freedom, (d) requires no assumption of the functional form of the PES, (e) possesses the full symmetry of the system, (f) does not involve fitting any parameters of any kind, and (g) is generally applicable to any system amenable to quantum chemical calculations and Collins' interpolation method. The calculated zero-point energy agrees to within 0.2% of its current best estimate. A0 and B0 are within 0.9 and 0.3%, respectively, of experiment.

  10. Data Acquisition System for Electron Energy Loss Coincident Spectrometers

    Institute of Scientific and Technical Information of China (English)

    Zhang Chi; Yu Xiaoqi; Yang Tao

    2005-01-01

    A Data Acquisition System (DAQ) for electron energy loss coincident spectrometers (EELCS) has been developed. The system is composed of a Multiplex Time-Digital Converter (TDC) that measures the flying time of positive and negative ions and a one-dimension positionsensitive detector that records the energy loss of scattering electrons. The experimental data are buffered in a first-in-first-out(FIFO) memory module, then transferred from the FIFO memory to PC by the USB interface. The DAQ system can record the flying time of several ions in one collision, and allows of different data collection modes. The system has been demonstrated at the Electron Energy Loss Coincident Spectrometers at the Laboratory of Atomic and Molecular Physics, USTC. A detail description of the whole system is given and experimental results shown.

  11. Dynamical Effects on Jet Energy Loss in QCD Medium

    CERN Document Server

    Djordjevic, Magdalena

    2009-01-01

    Computation of radiative energy loss in a finite size dynamically screened QCD medium is a key ingredient for obtaining reliable predictions for jet quenching in ultra-relativistic heavy ion collisions. We develop a theory which allows calculating, to first order in the number of scattering centers, the energy loss of a heavy quark traveling through a finite size dynamical QCD medium. We show that the result for a dynamical medium is significantly larger compared to a medium consisting of randomly distributed static scattering centers. Therefore, a quantitative description of jet suppression at RHIC and LHC experiments must correctly account for the dynamics of the medium's constituents. Furthermore, qualitative predictions that come from this energy loss formalism are also presented.

  12. Parton energy loss in a classical strongly coupled QGP

    OpenAIRE

    Dusling, Kevin; Zahed, Ismail

    2009-01-01

    We investigate the energy loss of heavy quarks in the gas, liquid and solid phase of a classical quark-gluon plasma (cQGP) using molecular dynamics simulations. The model consists of massive quarks and gluons interacting as a classical non-relativistic colored Coulomb gas. We show that the electric force decorrelates on a short time scale causing the energy loss to be mostly diffusive and langevin-like in the cQGP. We find that the drag coefficient changes with the heavy quark mass, while the...

  13. Computation of electron energy loss spectra by an iterative method

    Energy Technology Data Exchange (ETDEWEB)

    Koval, Peter [Donostia International Physics Center (DIPC), Paseo Manuel de Lardizabal 4, E-20018 San Sebastián (Spain); Centro de Física de Materiales CFM-MPC, Centro Mixto CSIC-UPV/EHU, Paseo Manuel de Lardizabal 5, E-20018 San Sebastián (Spain); Ljungberg, Mathias Per [Donostia International Physics Center (DIPC), Paseo Manuel de Lardizabal 4, E-20018 San Sebastián (Spain); Foerster, Dietrich [LOMA, Université de Bordeaux 1, 351 Cours de la Liberation, 33405 Talence (France); Sánchez-Portal, Daniel [Donostia International Physics Center (DIPC), Paseo Manuel de Lardizabal 4, E-20018 San Sebastián (Spain); Centro de Física de Materiales CFM-MPC, Centro Mixto CSIC-UPV/EHU, Paseo Manuel de Lardizabal 5, E-20018 San Sebastián (Spain)

    2015-07-01

    A method is presented to compute the dielectric function for extended systems using linear response time-dependent density functional theory. Localized basis functions with finite support are used to expand both eigenstates and response functions. The electron-energy loss function is directly obtained by an iterative Krylov-subspace method. We apply our method to graphene and silicon and compare it to plane-wave based approaches. Finally, we compute electron-energy loss spectrum of C{sub 60} crystal to demonstrate the merits of the method for molecular crystals, where it will be most competitive.

  14. Average Neutron Total Cross Sections in the Unresolved Energy Range From ORELA High Resolutio Transmission Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Derrien, H

    2004-05-27

    Average values of the neutron total cross sections of {sup 233}U, {sup 235}U, {sup 238}U, and {sup 239}Pu have been obtained in the unresolved resonance energy range from high-resolution transmission measurements performed at ORELA in the past two decades. The cross sections were generated by correcting the effective total cross sections for the self-shielding effects due to the resonance structure of the data. The self-shielding factors were found by calculating the effective and true cross sections with the computer code SAMMY for the same Doppler and resolution conditions as for the transmission measurements, using an appropriate set of resonance parameters. Our results are compared to results of previous measurements and to the current ENDF/B-VI data.

  15. Adaptive polarization image fusion based on regional energy dynamic weighted average

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yong-qiang; PAN Quan; ZHANG Hong-cai

    2005-01-01

    According to the principle of polarization imaging and the relation between Stokes parameters and the degree of linear polarization, there are much redundant and complementary information in polarized images. Since man-made objects and natural objects can be easily distinguished in images of degree of linear polarization and images of Stokes parameters contain rich detailed information of the scene, the clutters in the images can be removed efficiently while the detailed information can be maintained by combining these images. An algorithm of adaptive polarization image fusion based on regional energy dynamic weighted average is proposed in this paper to combine these images. Through an experiment and simulations,most clutters are removed by this algorithm. The fusion method is used for different light conditions in simulation, and the influence of lighting conditions on the fusion results is analyzed.

  16. Average Anisotropy Characteristics of High Energy Cosmic Ray Particles and Geomagnetic Disturbance Index Ap

    Indian Academy of Sciences (India)

    C. M. Tiwari; D. P. Tiwari; Ajay K. Pandey; Pankaj K. Shrivastava

    2005-12-01

    The average characteristics of the diurnal and semi-diurnal anisotropy of cosmic ray intensity at relativistic energies have been obtained by using data from the worldwide grid of neutron monitor for the period 1989 to 1996. The complex behaviour of the diurnal amplitudes and time of maxima (phase) and its association with the Ap index on a long-term and day-to-day basis have been studied. Even though the general characteristics, on a yearly average basis, have not changed significantly during this period, both the diurnal and semi-diurnal amplitudes and phases vary significantly, besides significant changes being observed for different interplanetary conditions on a short-term basis. It is found that the relationship between the Ap index and the diurnal vector is out of phase during the period 1991 to 1995. On a long-term basis, the correlation of diurnal variation with Ap index has been found to vary during the solar cycle. On a short-term basis, it has been observed that the high Ap days are usually associated with higher amplitudes with phase shifted to earlier hours.

  17. Iterative reconstruction for dual energy CT with an average image-induced nonlocal means regularization

    Science.gov (United States)

    Zhang, Houjin; Zeng, Dong; Lin, Jiahui; Zhang, Hao; Bian, Zhaoying; Huang, Jing; Gao, Yuanyuan; Zhang, Shanli; Zhang, Hua; Feng, Qianjin; Liang, Zhengrong; Chen, Wufan; Ma, Jianhua

    2017-07-01

    Reducing radiation dose in dual energy computed tomography (DECT) is highly desirable but it may lead to excessive noise in the filtered backprojection (FBP) reconstructed DECT images, which can inevitably increase the diagnostic uncertainty. To obtain clinically acceptable DECT images from low-mAs acquisitions, in this work we develop a novel scheme based on measurement of DECT data. In this scheme, inspired by the success of edge-preserving non-local means (NLM) filtering in CT imaging and the intrinsic characteristics underlying DECT images, i.e. global correlation and non-local similarity, an averaged image induced NLM-based (aviNLM) regularization is incorporated into the penalized weighted least-squares (PWLS) framework. Specifically, the presented NLM-based regularization is designed by averaging the acquired DECT images, which takes the image similarity within the two energies into consideration. In addition, the weighted least-squares term takes into account DECT data-dependent variance. For simplicity, the presented scheme was termed as ‘PWLS-aviNLM’. The performance of the presented PWLS-aviNLM algorithm was validated and evaluated on digital phantom, physical phantom and patient data. The extensive experiments validated that the presented PWLS-aviNLM algorithm outperforms the FBP, PWLS-TV and PWLS-NLM algorithms quantitatively. More importantly, it delivers the best qualitative results with the finest details and the fewest noise-induced artifacts, due to the aviNLM regularization learned from DECT images. This study demonstrated the feasibility and efficacy of the presented PWLS-aviNLM algorithm to improve the DECT reconstruction and resulting material decomposition.

  18. Varying and inverting the mass hierarchy in collisional energy loss

    CERN Document Server

    Kolevatov, Rodion

    2008-01-01

    Heavy ion collisions at RHIC and at the LHC give access to the medium-induced suppression patterns of heavy-flavored single inclusive hadron spectra at high transverse momentum. This opens novel opportunities for a detailed characterization of the medium produced in the collision. In this note, we point out that the capacity of a QCD medium to absorb the recoil of a partonic projectile is an independent signature, which may differ for different media at the same density. In particular, while the mass hierarchy (i.e., the projectile mass dependence) of radiative energy loss depends solely on a property of the projectile, the mass hierarchy of collisional energy loss depends significantly on properties of the medium. By varying these properties in a class of models, we find that the mass hierarchy of collisional parton energy loss can be modified considerably and can even be inverted, compared to that of radiative parton energy loss. This may help to disentangle the relative strengths of radiative and collision...

  19. Probing Plasmonic Nanostructures with Electron Energy - Loss Spectroscopy

    DEFF Research Database (Denmark)

    Raza, Søren

    for nonlocal response. The experimental work comprises the use of electron energy-loss spectroscopy (EELS) to excite and study both localized and propagating surface plasmons in metal structures. Following a short introduction, we present the theoretical foundation to describe nonlocal response in Maxwell...

  20. Energy Drinks, Weight Loss, and Disordered Eating Behaviors

    Science.gov (United States)

    Jeffers, Amy J.; Vatalaro Hill, Katherine E.; Benotsch, Eric G.

    2014-01-01

    Objective: The present study examined energy drink consumption and relations with weight loss attempts and behaviors, body image, and eating disorders. Participants/Methods: This is a secondary analysis using data from 856 undergraduate students who completed the American College Health Association-National College Health Assessment II…

  1. Energy Drinks, Weight Loss, and Disordered Eating Behaviors

    Science.gov (United States)

    Jeffers, Amy J.; Vatalaro Hill, Katherine E.; Benotsch, Eric G.

    2014-01-01

    Objective: The present study examined energy drink consumption and relations with weight loss attempts and behaviors, body image, and eating disorders. Participants/Methods: This is a secondary analysis using data from 856 undergraduate students who completed the American College Health Association-National College Health Assessment II…

  2. Electron energy-loss spectroscopy of branched gap plasmon resonators

    DEFF Research Database (Denmark)

    Raza, Søren; Esfandyarpour, Majid; Koh, Ai Leen

    2016-01-01

    The miniaturization of integrated optical circuits below the diffraction limit for high-speed manipulation of information is one of the cornerstones in plasmonics research. By coupling to surface plasmons supported on nanostructured metallic surfaces, light can be confined to the nanoscale...... microscope combined with electron energy-loss spectroscopy, we experimentally show the propagation, bending and splitting of slot gap plasmons....

  3. Elucidating Jet Energy Loss Using Jets: Prospects from ATLAS

    CERN Document Server

    Grau, N

    2009-01-01

    The details of jet energy loss, as measured at RHIC with single particles and mu lti-particle correlations, are unresolved, and new experimental measurements are necessary in order to shed light on the mechanism and behavior of energy loss. Utilizing the ATLAS electromagnetic and hadronic calorimetry, full jet reconstru ction in a heavy ion environment will be performed over a wide range of $p_T$ an d rapidity. With fully reconstructed jets, new and more sensitive probes are ava ilable to test models of energy loss. In this talk, we present a series of obser vables such as the jet $R_{AA}$, the transverse momentum, $j_T$, spectrum of fra gments, the fragmentation function $D(z)$, jet shapes, and di-jet correlations, that aresensitive to perturbative and non-perturbative energy loss. We also disc uss the current level of sensitivity to expected modifications using several dif ferent jet algorithms, the cone, $k_T$, and anti-$k_T$ algorithms.

  4. Intermittent Moderate Energy Restriction Improves Weight Loss Efficiency in Diet-Induced Obese Mice

    Science.gov (United States)

    Seimon, Radhika V.; Shi, Yan-Chuan; Slack, Katy; Lee, Kailun; Fernando, Hamish A.; Nguyen, Amy D.; Zhang, Lei; Lin, Shu; Enriquez, Ronaldo F.; Lau, Jackie

    2016-01-01

    Background Intermittent severe energy restriction is popular for weight management. To investigate whether intermittent moderate energy restriction may improve this approach by enhancing weight loss efficiency, we conducted a study in mice, where energy intake can be controlled. Methods Male C57/Bl6 mice that had been rendered obese by an ad libitum diet high in fat and sugar for 22 weeks were then fed one of two energy-restricted normal chow diets for a 12-week weight loss phase. The continuous diet (CD) provided 82% of the energy intake of age-matched ad libitum chow-fed controls. The intermittent diet (ID) provided cycles of 82% of control intake for 5–6 consecutive days, and ad libitum intake for 1–3 days. Weight loss efficiency during this phase was calculated as (total weight change) ÷ [(total energy intake of mice on CD or ID)–(total average energy intake of controls)]. Subsets of mice then underwent a 3-week weight regain phase involving ad libitum re-feeding. Results Mice on the ID showed transient hyperphagia relative to controls during each 1–3-day ad libitum feeding period, and overall ate significantly more than CD mice (91.1±1.0 versus 82.2±0.5% of control intake respectively, n = 10, Pweight loss or weight regain phases with respect to body weight, fat mass, circulating glucose or insulin concentrations, or the insulin resistance index. Weight loss efficiency was significantly greater with ID than with CD (0.042±0.007 versus 0.018±0.001 g/kJ, n = 10, Pweight loss relative to energy deficit in mice. PMID:26784324

  5. Flow effects on jet energy loss with detailed balance

    Institute of Scientific and Technical Information of China (English)

    CHENG Luan; LIU Jia; WANG EnKe

    2014-01-01

    In the presence of collective flow a new model potential describing the interaction of the hard jet with scattering centers is derived based on the static color-screened Yukawa potential.The flow effect on jet quenching with detailed balance is investigated in pQCD.It turns out,considering the collective flow with velocity vz along the jet direction,the collective flow decreases the LPM destructive interference comparing to that in the static medium.The gluon absorption plays a more important role in the moving medium.The collective flow increases the energy gain from gluon absorption,however,decreases the energy loss from gluon radiation,which is (1-vz) times as that in the static medium to the first order of opacity.In the presence of collective flow,the second order in opacity correction is relatively small compared to the first order.So that the total effective energy loss is decreased.The flow dependence of the energy loss will affect the suppression of high PT hadron spectrum and anisotropy parameter v2 in high-energy heavy-ion collisions.

  6. Signaling proteins that influence energy intake may affect unintentional weight loss in elderly persons.

    Science.gov (United States)

    Wernette, Catherine M; White, B Douglas; Zizza, Claire A

    2011-06-01

    After age 70 to 75 years, average body weight decreases both in ailing and healthy people because of a loss of appetite that results in reduced energy intake and the loss of body fat and lean muscle tissue. This so-called anorexia of aging predisposes elderly people to continued pathologic weight loss and malnutrition-major causes of morbidity and mortality. Health care professionals must understand the many factors involved in the anorexia of aging to help older adults prevent unintentional weight loss. Psychological, social, and cultural factors are important effectors; however, physiological factors are emphasized here because they are not thoroughly understood and they make it inherently difficult for most people to alter their body weight. Monoamines, steroid hormones (glucocorticoids and mineralocorticoids), endocannabinoids, and proteins all influence body weight. This review is an analysis of proteins from the brain, pancreas, adipose tissue, and gastrointestinal tract that are known to affect energy intake and energy balance, with an attempt to identify those factors that may change with aging. The articles included in this review were obtained by a PubMed database search using the keywords mouse OR rat OR human AND aged OR aging OR older OR elderly AND adult AND anorexia OR "unintentional weight loss," and each of the individual proteins discussed, as well as from the reference lists of those articles. The results reveal that some proteins may be important in the development of unintentional weight loss in elderly persons, whereas others may not have a significant role. However, many of the proteins that could conceivably have a role in unintentional weight loss have not yet been studied with that question in mind. Preventing unintentional weight loss in older adults is an important goal and further research on the role of proteins important for the maintenance of energy balance and the development of unintentional weight loss in elderly persons is

  7. Energy current loss instability model on a computer

    Science.gov (United States)

    Edighoffer, John A.

    1995-04-01

    The computer program called Energy Stability in a Recirculating Accelerator (ESRA) Free Electron Laser (FEL) has been written to model bunches of particles in longitudinal phase space transversing a recirculating accelerator and the associated rf changes and aperture current losses. This energy-current loss instability was first seen by Los Alamos's FEL group in their energy recovery experiments. This code addresses these stability issues and determines the transport, noise, feedback and other parameters for which these FEL systems are stable or unstable. Two representative systems are modeled, one for the Novosibirisk high power FEL racetrack microtron for photochemical research, the other is the CEBAF proposed UV FEL system. Both of these systems are stable with prudent choices of parameters.

  8. Theoretical study of core-loss electron energy-loss spectroscopy at graphene nanoribbon edges

    Science.gov (United States)

    Fujita, N.; Hasnip, P. J.; Probert, M. I. J.; Yuan, J.

    2015-08-01

    A systematic study of simulated atomic-resolution electronic energy-loss spectroscopy (EELS) for different graphene nanoribbons (GNRs) is presented. The results of ab initio studies of carbon 1s core-loss EELS on GNRs with different ribbon edge structures and different hydrogen terminations show that theoretical core-loss EELS can distinguish key structural features at the atomic scale. In addition, the combination of polarized core-loss EELS with symmetry resolved electronic partial density of states calculations can be used to identify the origins of all the primary features in the spectra. For example, the nature of the GNR edge structure (armchair, zigzag, etc) can be identified, along with the degree of hydrogenation. Hence it is possible to use the combination of ab initio calculations with high resolution, high energy transmission core-loss EELS experiments to determine the local atomic arrangement and chemical bonding states (i.e. a structural fingerprint) in GNRs, which is essential for future practical applications of graphene.

  9. Theoretical study of core-loss electron energy-loss spectroscopy at graphene nanoribbon edges.

    Science.gov (United States)

    Fujita, N; Hasnip, P J; Probert, M I J; Yuan, J

    2015-08-01

    A systematic study of simulated atomic-resolution electronic energy-loss spectroscopy (EELS) for different graphene nanoribbons (GNRs) is presented. The results of ab initio studies of carbon [Formula: see text] core-loss EELS on GNRs with different ribbon edge structures and different hydrogen terminations show that theoretical core-loss EELS can distinguish key structural features at the atomic scale. In addition, the combination of polarized core-loss EELS with symmetry resolved electronic partial density of states calculations can be used to identify the origins of all the primary features in the spectra. For example, the nature of the GNR edge structure (armchair, zigzag, etc) can be identified, along with the degree of hydrogenation. Hence it is possible to use the combination of ab initio calculations with high resolution, high energy transmission core-loss EELS experiments to determine the local atomic arrangement and chemical bonding states (i.e. a structural fingerprint) in GNRs, which is essential for future practical applications of graphene.

  10. Modular Hamiltonians for Deformed Half-Spaces and the Averaged Null Energy Condition

    CERN Document Server

    Faulkner, Thomas; Parrikar, Onkar; Wang, Huajia

    2016-01-01

    We study modular Hamiltonians corresponding to the vacuum state for deformed half-spaces in relativistic quantum field theories on $\\mathbb{R}^{1,d-1}$. We show that in addition to the usual boost generator, there is a contribution to the modular Hamiltonian at first order in the shape deformation, proportional to the integral of the null components of the stress tensor along the Rindler horizon. We use this fact along with monotonicity of relative entropy to prove the averaged null energy condition in Minkowski space-time. This subsequently gives a new proof of the Hofman-Maldacena bounds on the parameters appearing in CFT three-point functions. Our main technical advance involves adapting newly developed perturbative methods for calculating entanglement entropy to the problem at hand. These methods were recently used to prove certain results on the shape dependence of entanglement in CFTs and here we generalize these results to excited states and real time dynamics. We also discuss the AdS/CFT counterpart o...

  11. Modular Hamiltonians for deformed half-spaces and the averaged null energy condition

    Science.gov (United States)

    Faulkner, Thomas; Leigh, Robert G.; Parrikar, Onkar; Wang, Huajia

    2016-09-01

    We study modular Hamiltonians corresponding to the vacuum state for deformed half-spaces in relativistic quantum field theories on {{R}}^{1,d-1} . We show that in addition to the usual boost generator, there is a contribution to the modular Hamiltonian at first order in the shape deformation, proportional to the integral of the null components of the stress tensor along the Rindler horizon. We use this fact along with monotonicity of relative entropy to prove the averaged null energy condition in Minkowski space-time. This subsequently gives a new proof of the Hofman-Maldacena bounds on the parameters appearing in CFT three-point functions. Our main technical advance involves adapting newly developed perturbative methods for calculating entanglement entropy to the problem at hand. These methods were recently used to prove certain results on the shape dependence of entanglement in CFTs and here we generalize these results to excited states and real time dynamics. We also discuss the AdS/CFT counterpart of this result, making connection with the recently proposed gravitational dual for modular Hamiltonians in holographic theories.

  12. Deconvolution of the energy loss function of the KATRIN experiment

    Science.gov (United States)

    Hannen, V.; Heese, I.; Weinheimer, C.; Sejersen Riis, A.; Valerius, K.

    2017-03-01

    The KATRIN experiment aims at a direct and model independent determination of the neutrino mass with 0.2 eV/c2 sensitivity (at 90% C.L.) via a measurement of the endpoint region of the tritium beta-decay spectrum. The main components of the experiment are a windowless gaseous tritium source (WGTS), differential and cryogenic pumping sections and a tandem of a pre- and a main-spectrometer, applying the concept of magnetic adiabatic collimation with an electrostatic retardation potential to analyze the energy of beta decay electrons and to guide electrons passing the filter onto a segmented silicon PIN detector. One of the important systematic uncertainties of such an experiment are due to energy losses of β-decay electrons by elastic and inelastic scattering off tritium molecules within the source volume which alter the shape of the measured spectrum. To correct for these effects an independent measurement of the corresponding energy loss function is required. In this work we describe a deconvolution method to extract the energy loss function from measurements of the response function of the experiment at different column densities of the WGTS using a monoenergetic electron source.

  13. EnviroAtlas - Annual average potential wind energy resource by 12-digit HUC for the Conterminous United States

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset shows the annual average potential wind energy resource in kilowatt hours per square kilometer per day for each 12-digit Hydrologic Unit...

  14. Did high energy astrophysical sources contribute to Martian atmospheric loss?

    CERN Document Server

    Atri, Dimitra

    2016-01-01

    Mars is believed to have had a substantial atmosphere in the past. Atmospheric loss led to depressurization and cooling, and is thought to be the primary driving force responsible for the loss of liquid water from its surface. Recently, MAVEN observations have provided new insight into the physics of atmospheric loss induced by ICMEs and solar wind interacting with the Martian atmosphere. In addition to solar radiation, it is likely that its atmosphere has been exposed to radiation bursts from high-energy astrophysical sources which become highly probable on timescales of ~Gy and beyond. These sources are capable of significantly enhancing the rates of photoionization and charged particle-induced ionization in the upper atmosphere. Here, we explore the possibility of damage from Galactic Gamma Ray Bursts, nearby supernovae, encounter with dense interstellar clouds and extreme solar events. We use Monte Carlo simulations to model the interaction of charged particles and photons from astrophysical sources in th...

  15. Aromatic Polyurea Possessing High Electrical Energy Density and Low Loss

    Science.gov (United States)

    Thakur, Yash; Lin, Minren; Wu, Shan; Zhang, Q. M.

    2016-10-01

    We report the development of a dielectric polymer, poly (ether methyl ether urea) (PEMEU), which possesses a dielectric constant of 4 and is thermally stable up to 150°C. The experimental results show that the ether units are effective in softening the rigid polymer and making it thermally processable, while the high dipole moment of urea units and glass structure of the polymer leads to a low dielectric loss and low conduction loss. As a result, PEMEU high quality thin films can be fabricated which exhibit exceptionally high breakdown field of >1.5 GV/m, and a low conduction loss at fields up to the breakdown. Consequently, the PEMEU films exhibit a high charge-discharge efficiency of 90% and a high discharged energy density of 36 J/cm3.

  16. Anisotropic plasmons, excitons, and electron energy loss spectroscopy of phosphorene

    Science.gov (United States)

    Ghosh, Barun; Kumar, Piyush; Thakur, Anmol; Chauhan, Yogesh Singh; Bhowmick, Somnath; Agarwal, Amit

    2017-07-01

    In this article, we explore the anisotropic electron energy loss spectrum (EELS) in monolayer phosphorene based on ab initio time-dependent density-functional-theory calculations. Similarly to black phosphorus, the EELS of undoped monolayer phosphorene is characterized by anisotropic excitonic peaks for energies in the vicinity of the band gap and by interband plasmon peaks for higher energies. On doping, an additional intraband plasmon peak also appears for energies within the band gap. Similarly to other two-dimensional systems, the intraband plasmon peak disperses as ωpl∝√{q } in both the zigzag and armchair directions in the long-wavelength limit and deviates for larger wave vectors. The anisotropy of the long-wavelength plasmon intraband dispersion is found to be inversely proportional to the square root of the ratio of the effective masses: ωpl(q y ̂) /ωpl(q x ̂) =√{mx/my } .

  17. In Situ Electron Energy Loss Spectroscopy in Liquids

    CERN Document Server

    Holtz, Megan E; Gao, Jie; Abruña, Héctor D; Muller, David A

    2012-01-01

    In situ scanning transmission electron microscopy (STEM) through liquids is a promising approach for exploring biological and materials processes. However, options for in situ chemical identification are limited: X-ray analysis is precluded because the holder shadows the detector, and electron energy loss spectroscopy (EELS) is degraded by multiple scattering events in thick layers. Here, we explore the limits of EELS for studying chemical reactions in their native environments in real time and on the nanometer scale. The determination of the local electron density, optical gap and thickness of the liquid layer by valence EELS is demonstrated for liquids. By comparing theoretical and experimental plasmon energies, we find that liquids appear to follow the free-electron model that has been previously established for solids. Signals at energies below the optical gap and plasmon energy of the liquid provide a high signal-to-background ratio as demonstrated for LiFePO4 in aqueous solution. The potential for using...

  18. Accurate bond energies of biodiesel methyl esters from multireference averaged coupled-pair functional calculations.

    Science.gov (United States)

    Oyeyemi, Victor B; Keith, John A; Carter, Emily A

    2014-09-04

    Accurate bond dissociation energies (BDEs) are important for characterizing combustion chemistry, particularly the initial stages of pyrolysis. Here we contribute to evaluating the thermochemistry of biodiesel methyl ester molecules using ab initio BDEs derived from a multireference averaged coupled-pair functional (MRACPF2)-based scheme. Having previously validated this approach for hydrocarbons and a variety of oxygenates, herein we provide further validation for bonds within carboxylic acids and methyl esters, finding our scheme predicts BDEs within chemical accuracy (i.e., within 1 kcal/mol) for these molecules. Insights into BDE trends with ester size are then analyzed for methyl formate through methyl crotonate. We find that the carbonyl group in the ester moiety has only a local effect on BDEs. C═C double bonds in ester alkyl chains are found to increase the strengths of bonds adjacent to the double bond. An important exception are bonds beta to C═C or C═O bonds, which produce allylic-like radicals upon dissociation. The observed trends arise from different degrees of geometric relaxation and resonance stabilization in the radicals produced. We also compute BDEs in various small alkanes and alkenes as models for the long hydrocarbon chain of actual biodiesel methyl esters. We again show that allylic bonds in the alkenes are much weaker than those in the small methyl esters, indicating that hydrogen abstractions are more likely at the allylic site and even more likely at bis-allylic sites of alkyl chains due to more electrons involved in π-resonance in the latter. Lastly, we use the BDEs in small surrogates to estimate heretofore unknown BDEs in large methyl esters of biodiesel fuels.

  19. Time average neutralized migma: A colliding beam/plasma hybrid physical state as aneutronic energy source — A review

    Science.gov (United States)

    Maglich, Bogdan C.

    1988-08-01

    A D + beam of kinetic energy Ti = 0.7 MeV was stored in a "simple mirror" magnetic field as self-colliding orbits or migma and neutralized by ambient, oscillating electrons whose bounce frequencies were externally controlled. Space charge density was exceeded by an order of magnitude without instabilities. Three nondestructive diagnostic methods allowed measurements of ion orbit distribution, ion storage times, ion energy distribution, nuclear reaction rate, and reaction product spectrum. Migma formed a disc 20 cm in diameter and 0.5 cm thick. Its ion density was sharply peaked in the center; the ion-to-electron temperature ratio was TiTe ˜ 10 3; ion-electron temperature equilibrium was never reached. The volume average and central D + density were n = 3.2 × 10 9 cm -3 and nc = 3 × 10 10 cm -3 respectively, compared to the space charge limit density nsc = 4 × 10 8 cm -3. The energy confinement time was τc = 20-30 s, limited by the change exchange reactions with the residual gas in the vacuum (5 × 10 -9 Torr). The ion energy loss rate was 1.4 keV/s. None of the instabilities that were observed in mirrors at several orders of magnitude lower density occurred. The proton energy spectrum for dd + d → T + p + 4 MeV shows that dd collided at an average crossing angle of 160°. Evidence for exponential density buildup has also been observed. Relative to Migma III results and measured in terms of the product of ion energy E, density n, and confinement time τ, device performance was improved by a factor of 500. Using the central fast ion density, we obtained the triple product: Tnτ ≅ 4 × 10 14 keV s cm -3, which is greater than that of the best fusion devices. The luminosity (collision rate per unit cross section) was ˜ 10 29 cm -2s -1, with o.7 A ion current through the migma center. The stabilizing features of migma are: (1) large Larmor radius; (2) small canonical angular momentum; (3) short axial length z (disc shape); (4) nonadiabatic motions in r and z

  20. Power Loss Analysis and Comparison of Segmented and Unsegmented Energy Coupling Coils for Wireless Energy Transfer.

    Science.gov (United States)

    Tang, Sai Chun; McDannold, Nathan J

    2015-03-01

    This paper investigated the power losses of unsegmented and segmented energy coupling coils for wireless energy transfer. Four 30-cm energy coupling coils with different winding separations, conductor cross-sectional areas, and number of turns were developed. The four coils were tested in both unsegmented and segmented configurations. The winding conduction and intrawinding dielectric losses of the coils were evaluated individually based on a well-established lumped circuit model. We found that the intrawinding dielectric loss can be as much as seven times higher than the winding conduction loss at 6.78 MHz when the unsegmented coil is tightly wound. The dielectric loss of an unsegmented coil can be reduced by increasing the winding separation or reducing the number of turns, but the power transfer capability is reduced because of the reduced magnetomotive force. Coil segmentation using resonant capacitors has recently been proposed to significantly reduce the operating voltage of a coil to a safe level in wireless energy transfer for medical implants. Here, we found that it can naturally eliminate the dielectric loss. The coil segmentation method and the power loss analysis used in this paper could be applied to the transmitting, receiving, and resonant coils in two- and four-coil energy transfer systems.

  1. Research of the temperature measurement of high-energy laser energy meter and energy loss compensation technique

    Science.gov (United States)

    Yu, Xun; Wang, Hui; Wu, Ji'an; Wang, Fang; Li, Qian

    2009-11-01

    The energy measurement of high energy laser is converts incident laser energy into heat energy, calculates energy utilizing absorber temperature rise, thus the energy value can be gained. Temperature measurement of high-energy laser energy meter and energy loss compensation during the course of the measurement were studied here. Firstly, temperature-resistance characteristics of resistance wire was analyzed, which was winded on exterior surface of the absorbing cavity of high-energy laser energy meter and used in temperature measurement. Least square method was used to process experiment data and a compensation model was established to calibrate the relationship of temperature vs. resistance. Experiment proved that, error between resistance wire and Pt100 is less than 0.01Ω and temperature error is less than 0.02°C. This greatly improves accuracy of the high energy meter measurement result. Secondly, aimed to the compensation of laser energy loss caused by absorbing cavity's heat exchange, the heat energy loss of absorbing cavity, resulted from thermal radiation, heat convection and heat conduction was analyzed based on heat transfer theory. Its mathematics model was established. Least square method was used to fit a curve of experiment data in order to compensate energy loss. Repetitiveness of measurement is 0.7%, which is highly improved.

  2. Dependence of the population on the temperature in the Boltzmann distribution: a simple relation involving the average energy

    NARCIS (Netherlands)

    Angeli, C.; Cimiraglia, R.; Dallo, F.; Guareschi, R.; Tenti, L.

    2013-01-01

    The dependence on the temperature of the population of the ith state, Pi, in the Boltzmann distribution is analyzed by studying its derivative with respect to the temperature, T. A simple expression is found, involving Pi, the energy of the state, Ei, and the average energy, âŸ̈E⟩. This relation

  3. Dependence of the population on the temperature in the Boltzmann distribution: a simple relation involving the average energy

    NARCIS (Netherlands)

    Angeli, C.; Cimiraglia, R.; Dallo, F.; Guareschi, R.; Tenti, L.

    2013-01-01

    The dependence on the temperature of the population of the ith state, Pi, in the Boltzmann distribution is analyzed by studying its derivative with respect to the temperature, T. A simple expression is found, involving Pi, the energy of the state, Ei, and the average energy, âŸ̈E⟩. This relation i

  4. Average bond energies between boron and elements of the fourth, fifth, sixth, and seventh groups of the periodic table

    Science.gov (United States)

    Altshuller, Aubrey P

    1955-01-01

    The average bond energies D(gm)(B-Z) for boron-containing molecules have been calculated by the Pauling geometric-mean equation. These calculated bond energies are compared with the average bond energies D(exp)(B-Z) obtained from experimental data. The higher values of D(exp)(B-Z) in comparison with D(gm)(B-Z) when Z is an element in the fifth, sixth, or seventh periodic group may be attributed to resonance stabilization or double-bond character.

  5. The effect of weight loss by energy restriction on metabolic profile and glucose tolerance in ponies.

    Science.gov (United States)

    Van Weyenberg, S; Hesta, M; Buyse, J; Janssens, G P J

    2008-10-01

    In nine initially obese ponies, a weekly weight loss according to 1% of their ideal body weight was evaluated for its impact on insulin sensitivity and metabolic profile. Weight loss was obtained solely through energy restriction, initially at 70% of maintenance energy requirements, but to maintain constant weight loss, feed amount had to be decreased to 50% and 35% of maintenance energy requirement during the course of the trial. An oral glucose tolerance test (OGTT) was performed at weeks 0, 10 and 17. Fasted blood samples were taken on weeks 0, 3, 10, 17 for analysis of triglycerides (TG), non-esterified fatty acids (NEFA), creatine phosphokinase (CPK), lactate dehydrogenase (LDH), T(3), T(4) and leptin. Total average weight loss was 18.2%. When the OGTT was performed at weeks 0, 10 and 17, ponies had lost 0.22%, 9.9% and 16.3% of their initial weight respectively. Weight loss was associated with a decreased AUC for glucose and insulin. Moreover, greater % weight loss was associated with a significantly lower glucose peak and a lower area under the curve (AUC glucose). The lower glucose response after an OGTT in lean ponies was not the result of an increased insulin secretion, but an improved insulin sensitivity. Restricted feeding led to mobilization of TG and NEFA and to a reduced basal metabolism, with lower LDH, CPK, T(3) and leptin. in obese Shetland ponies, weight loss at a rate of 1% of ideal body weight per week through restricted energy intake, ameliorated insulin sensitivity.

  6. Beam Loss Calibration Studies for High Energy Proton Accelerators

    CERN Document Server

    Stockner, M

    2007-01-01

    CERN's Large Hadron Collider (LHC) is a proton collider with injection energy of 450 GeV and collision energy of 7 TeV. Superconducting magnets keep the particles circulating in two counter rotating beams, which cross each other at the Interaction Points (IP). Those complex magnets have been designed to contain both beams in one yoke within a cryostat. An unprecedented amount of energy will be stored in the circulating beams and in the magnet system. The LHC outperforms other existing accelerators in its maximum beam energy by a factor of 7 and in its beam intensity by a factor of 23. Even a loss of a small fraction of the beam particles may cause the transition from the superconducting to the normal conducting state of the coil or cause physical damage to machine components. The unique combination of these extreme beam parameters and the highly advanced superconducting technology has the consequence that the LHC needs a more efficient beam cleaning and beam loss measurement system than previous accelerators....

  7. Beam Loss Calibration Studies for High Energy Proton Accelerators

    CERN Document Server

    Stockner, M

    2007-01-01

    CERN's Large Hadron Collider (LHC) is a proton collider with injection energy of 450 GeV and collision energy of 7 TeV. Superconducting magnets keep the particles circulating in two counter rotating beams, which cross each other at the Interaction Points (IP). Those complex magnets have been designed to contain both beams in one yoke within a cryostat. An unprecedented amount of energy will be stored in the circulating beams and in the magnet system. The LHC outperforms other existing accelerators in its maximum beam energy by a factor of 7 and in its beam intensity by a factor of 23. Even a loss of a small fraction of the beam particles may cause the transition from the superconducting to the normal conducting state of the coil or cause physical damage to machine components. The unique combination of these extreme beam parameters and the highly advanced superconducting technology has the consequence that the LHC needs a more efficient beam cleaning and beam loss measurement system than previous accelerators....

  8. Technology Roadmap. Energy Loss Reduction and Recovery in Industrial Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-11-01

    To help guide R&D decision-making and gain industry insights on the top opportunities for improved energy systems, ITP sponsored the Energy Loss Reduction and Recoveryin Energy Systems Roadmapping Workshopin April 2004 in Baltimore, Maryland. This Technology Roadmapis based largely on the results of the workshop and additional industrial energy studies supported by ITP and EERE. It summarizes industry feedback on the top opportunities for R&D investments in energy systems, and the potential for national impacts on energy use and the environment.

  9. Very Low Energy Supernovae from Neutrino Mass Loss

    CERN Document Server

    Lovegrove, Elizabeth

    2013-01-01

    The continuing difficulty of achieving a reliable explosion in simulations of core-collapse supernovae, especially for more massive stars, has led to speculation concerning the observable transients that might be produced if such a supernova fails. Even if a prompt outgoing shock fails to form in a collapsing presupernova star, one must still consider the hydrodynamic response of the star to the abrupt loss of mass via neutrinos as the core forms a protoneutron star. Following a suggestion by Nadezhin (1980), we calculate the hydrodynamical responses of typical supernova progenitor stars to the rapid loss of approximately 0.2 to 0.5 M_sun of gravitational mass from their centers. In a red supergiant star, a very weak supernova with total kinetic energy ~ 10^47 erg results. The binding energy of a large fraction of the hydrogen envelope before the explosion is of the same order and, depending upon assumptions regarding the neutrino loss rates, most of it is ejected. Ejection speeds are ~ 100 km/s and luminosit...

  10. Energy averages over regular and chaotic states in the decay out of superdeformed bands

    CERN Document Server

    Hussein, M S; Pato, M P; Takigawa, N; Ueda, M

    2003-01-01

    We describe the decay out of a superdeformed band using the methods of reaction theory. Assuming that decay-out occurs due to equal coupling (on average) to a sea of equivalent chaotic normally deformed (ND) states, we calculate the average intraband decay intensity and show that it can be written as an ``optical'' background term plus a fluctuation term, in total analogy with average nuclear cross sections. We also calculate the variance in closed form. We investigate how these objects are modified when the decay to the ND states occurs via an ND doorway and the ND states' statistical properties are changed from chaotic to regular. We show that the average decay intensity depends on two dimensionless variables in the first case while in the second case, four variables enter the picture.

  11. Intermittent Moderate Energy Restriction Improves Weight Loss Efficiency in Diet-Induced Obese Mice.

    Directory of Open Access Journals (Sweden)

    Radhika V Seimon

    Full Text Available Intermittent severe energy restriction is popular for weight management. To investigate whether intermittent moderate energy restriction may improve this approach by enhancing weight loss efficiency, we conducted a study in mice, where energy intake can be controlled.Male C57/Bl6 mice that had been rendered obese by an ad libitum diet high in fat and sugar for 22 weeks were then fed one of two energy-restricted normal chow diets for a 12-week weight loss phase. The continuous diet (CD provided 82% of the energy intake of age-matched ad libitum chow-fed controls. The intermittent diet (ID provided cycles of 82% of control intake for 5-6 consecutive days, and ad libitum intake for 1-3 days. Weight loss efficiency during this phase was calculated as (total weight change ÷ [(total energy intake of mice on CD or ID-(total average energy intake of controls]. Subsets of mice then underwent a 3-week weight regain phase involving ad libitum re-feeding.Mice on the ID showed transient hyperphagia relative to controls during each 1-3-day ad libitum feeding period, and overall ate significantly more than CD mice (91.1±1.0 versus 82.2±0.5% of control intake respectively, n = 10, P<0.05. There were no significant differences between CD and ID groups at the end of the weight loss or weight regain phases with respect to body weight, fat mass, circulating glucose or insulin concentrations, or the insulin resistance index. Weight loss efficiency was significantly greater with ID than with CD (0.042±0.007 versus 0.018±0.001 g/kJ, n = 10, P<0.01. Mice on the CD exhibited significantly greater hypothalamic mRNA expression of proopiomelanocortin (POMC relative to ID and control mice, with no differences in neuropeptide Y or agouti-related peptide mRNA expression between energy-restricted groups.Intermittent moderate energy restriction may offer an advantage over continuous moderate energy restriction, because it induces significantly greater weight loss relative

  12. Multiple scattering of low energy ions in matter: Influence of energy loss and interaction potential

    Energy Technology Data Exchange (ETDEWEB)

    Mekhtiche, A. [Laboratoire SNIRM, Faculté de Physique, Université des Sciences et de la Technologie Houari Boumediene (USTHB), BP 32 El Alia, Bab Ezzouar, Algiers (Algeria); Faculté des Sciences et de la Technologie, Université Yahia Farès de Médéa (Algeria); Khalal-Kouache, K., E-mail: kkouache@yahoo.fr [Laboratoire SNIRM, Faculté de Physique, Université des Sciences et de la Technologie Houari Boumediene (USTHB), BP 32 El Alia, Bab Ezzouar, Algiers (Algeria)

    2015-07-01

    In this paper, the effect of inelastic energy loss and interaction potential on transmitted ions at low energy is studied. For this purpose, angular distributions of slow He{sup +} ions transmitted through thin Ag films are calculated using the theory of multiple scattering. Thin films (20–50 Å at 2 keV and 50–200 Å at 10 keV) are considered so that the total path length of transmitted ions can be approximated by the value of the target thickness in this calculation. The corresponding values of the relative energy loss ΔE/E are comprised between 0.04 and 0.17. We show that even if low values of the thickness are considered, the total energy loss of ions in the target should be included in the calculation. These calculated angular distributions are also influenced by the potential used to describe the interaction between the incident ion and the target atom.

  13. Jet energy loss in heavy ion collisions from RHIC to LHC energies

    CERN Document Server

    Levai, Peter

    2011-01-01

    The suppression of hadron production originated from the induced jet energy loss is one of the most accepted and well understood phenomena in heavy ion collisions, which indicates the formation of color deconfined matter consists of quarks, antiquarks and gluons. This phenomena has been seen at RHIC energies and now the first LHC results display a very similar effect. In fact, the suppression is so close to each other at 200 AGeV and 2.76 ATeV, that it is interesting to investigate if such a suppression pattern can exist at all. We use the Gyulassy-Levai-Vitev description of induced jet energy loss combined with different nuclear shadowing functions and describe the experimental data. We claim that a consistent picture can be obtained for the produced hot matter with a weak nuclear shadowing. The interplay between nuclear shadowing and jet energy loss playes a crucial role in the understanding of the experimental data.

  14. High average power and energy microsecond pulse generation from an erbium-doped fluoride fiber MOPA system.

    Science.gov (United States)

    Luo, Hongyu; Li, Jianfneg; Xie, Jitao; Zhai, Bo; Wei, Chen; Liu, Yong

    2016-12-12

    We reported a high average power and energy microsecond pulse erbium-doped fluoride fiber MOPA system centered at 2786.8 nm. The master oscillator was a passively Q-switched erbium-doped fluoride fiber laser based on SESAM in a linear cavity. Then a one-stage erbium-doped fluoride fiber amplifier was used to boost its average output power to 4.2 W and pulse energy to 58.87 μJ. The pulse duration and repetition rate were 2.29 µs and 71.73 kHz, respectively. To the best of our knowledge, the achieved average output power and pulse energy are the recorded levels for the passively Q-switched fiber lasers at 3 μm wavelength region.

  15. The role of energy losses in photosynthetic light harvesting

    Science.gov (United States)

    Krüger, T. P. J.; van Grondelle, R.

    2017-07-01

    Photosynthesis operates at the bottom of the food chain to convert the energy of light into carbohydrates at a remarkable global rate of about 130 TW. Nonetheless, the overall photosynthetic process has a conversion efficiency of a few percent at best, significantly less than bottom-up photovoltaic cells. The primary photosynthetic steps, consisting of light harvesting and charge separation, are often presented as having near-unity quantum efficiency but this holds only true under ideal conditions. In this review, we discuss the importance of energy loss mechanisms to establish robustness in photosynthetic light harvesting. Thermal energy dissipation of light-harvesting complexes (LHCs) in different environments is investigated and the relationships and contrasts between concentration quenching of high pigment concentrations, photoprotection (non-photochemical quenching), quenching due to protein aggregation, and fluorescence blinking are discussed. The role of charge-transfer states in light harvesting and energy dissipation is highlighted and the importance of controlled protein structural disorder to switch the light-harvesting antennae between effective light harvesters and efficient energy quenchers is underscored. The main LHC of plants, LHCII, is used as a prime example.

  16. Simulating electron energy loss spectroscopy with the MNPBEM toolbox

    Science.gov (United States)

    Hohenester, Ulrich

    2014-03-01

    Within the MNPBEM toolbox, we show how to simulate electron energy loss spectroscopy (EELS) of plasmonic nanoparticles using a boundary element method approach. The methodology underlying our approach closely follows the concepts developed by García de Abajo and coworkers (Garcia de Abajo, 2010). We introduce two classes eelsret and eelsstat that allow in combination with our recently developed MNPBEM toolbox for a simple, robust, and efficient computation of EEL spectra and maps. The classes are accompanied by a number of demo programs for EELS simulation of metallic nanospheres, nanodisks, and nanotriangles, and for electron trajectories passing by or penetrating through the metallic nanoparticles. We also discuss how to compute electric fields induced by the electron beam and cathodoluminescence. Catalogue identifier: AEKJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKJ_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 38886 No. of bytes in distributed program, including test data, etc.: 1222650 Distribution format: tar.gz Programming language: Matlab 7.11.0 (R2010b). Computer: Any which supports Matlab 7.11.0 (R2010b). Operating system: Any which supports Matlab 7.11.0 (R2010b). RAM:≥1 GB Classification: 18. Catalogue identifier of previous version: AEKJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183 (2012) 370 External routines: MESH2D available at www.mathworks.com Does the new version supersede the previous version?: Yes Nature of problem: Simulation of electron energy loss spectroscopy (EELS) for plasmonic nanoparticles. Solution method: Boundary element method using electromagnetic potentials. Reasons for new version: The new version of the toolbox includes two additional classes for the simulation of electron energy

  17. Electron energy-loss spectroscopy study of hydrogenated amorphous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, N.A.; Fisher, R.F.; Asher, S.E.; Kazmerski, L.L.

    1987-07-01

    Electron energy-loss spectroscopy is used to study hydrogenated amorphous silicon (a-Si:H). Core-level and plasma excitations were examined as a function of hydrogen content. This technique and its interpretation reveals a consistent picture of the electron excitations within this important material. The a-Si:H thin films were fabricated by rf sputtering. Their hydrogen concentrations ranged from 0% to 15%. Hydrogen content was determined by infrared spectroscopy and secondary ion mass spectroscopy. X-ray photoelectron spectroscopy and inspection of the silicon Auger-KLL peak confirmed the silicon core levels.

  18. Probing Battery Chemistry with Liquid Cell Electron Energy Loss Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Unocic, Raymond R.; Baggetto, Loic; Veith, Gabriel M.; Aguiar, Jeffery A.; Unocic, Kinga A.; Sacci, Robert L.; Dudney, Nancy J.; More, Karren L.

    2015-11-25

    We demonstrate the ability to apply electron energy loss spectroscopy (EELS) to follow the chemistry and oxidation states of LiMn2O4 and Li4Ti5O12 battery electrodes within a battery solvent. The use and importance of in situ electrochemical cells coupled with a scanning/transmission electron microscope (S/TEM) has expanded and been applied to follow changes in battery chemistry during electrochemical cycling. Furthermore, we discuss experimental parameters that influence measurement sensitivity and provide a framework to apply this important analytical method to future in situ electrochemical studies.

  19. Enhanced relativistic-electron-beam energy loss in warm dense aluminum.

    Science.gov (United States)

    Vaisseau, X; Debayle, A; Honrubia, J J; Hulin, S; Morace, A; Nicolaï, Ph; Sawada, H; Vauzour, B; Batani, D; Beg, F N; Davies, J R; Fedosejevs, R; Gray, R J; Kemp, G E; Kerr, S; Li, K; Link, A; McKenna, P; McLean, H S; Mo, M; Patel, P K; Park, J; Peebles, J; Rhee, Y J; Sorokovikova, A; Tikhonchuk, V T; Volpe, L; Wei, M; Santos, J J

    2015-03-01

    Energy loss in the transport of a beam of relativistic electrons in warm dense aluminum is measured in the regime of ultrahigh electron beam current density over 2×10^{11}  A/cm^{2} (time averaged). The samples are heated by shock compression. Comparing to undriven cold solid targets, the roles of the different initial resistivity and of the transient resistivity (upon target heating during electron transport) are directly observable in the experimental data, and are reproduced by a comprehensive set of simulations describing the hydrodynamics of the shock compression and electron beam generation and transport. We measured a 19% increase in electron resistive energy loss in warm dense compared to cold solid samples of identical areal mass.

  20. Average Behavior of Battery - Electric Vehicles for Distributed Energy System Studies

    DEFF Research Database (Denmark)

    Marra, Francesco; Træholt, Chresten; Larsen, Esben

    2010-01-01

    The increase of focus on electric vehicles (EVs) as distributed energy resources calls for new concepts of aggregated models of batteries. Despite the developed battery models for EVs applications, when looking at energy storage scenarios using EVs, both geographical-temporal aspects and battery...

  1. A simple formula for insertion loss prediction of large acoustical enclosures using statistical energy analysis method

    Directory of Open Access Journals (Sweden)

    Kim Hyun-Sil

    2014-12-01

    Full Text Available Insertion loss prediction of large acoustical enclosures using Statistical Energy Analysis (SEA method is presented. The SEA model consists of three elements: sound field inside the enclosure, vibration energy of the enclosure panel, and sound field outside the enclosure. It is assumed that the space surrounding the enclosure is sufficiently large so that there is no energy flow from the outside to the wall panel or to air cavity inside the enclosure. The comparison of the predicted insertion loss to the measured data for typical large acoustical enclosures shows good agreements. It is found that if the critical frequency of the wall panel falls above the frequency region of interest, insertion loss is dominated by the sound transmission loss of the wall panel and averaged sound absorption coefficient inside the enclosure. However, if the critical frequency of the wall panel falls into the frequency region of interest, acoustic power from the sound radiation by the wall panel must be added to the acoustic power from transmission through the panel.

  2. Average fast neutron flux in three energy ranges in the Quinta assembly irradiated by two types of beams

    Directory of Open Access Journals (Sweden)

    Strugalska-Gola Elzbieta

    2017-01-01

    Full Text Available This work was performed within the international project “Energy plus Transmutation of Radioactive Wastes” (E&T - RAW for investigations of energy production and transmutation of radioactive waste of the nuclear power industry. 89Y (Yttrium 89 samples were located in the Quinta assembly in order to measure an average high neutron flux density in three different energy ranges using deuteron and proton beams from Dubna accelerators. Our analysis showed that the neutron density flux for the neutron energy range 20.8 - 32.7 MeV is higher than for the neutron energy range 11.5 - 20.8 MeV both for protons with an energy of 0.66 GeV and deuterons with an energy of 2 GeV, while for deuteron beams of 4 and 6 GeV we did not observe this.

  3. Nonequilibrium electron energy-loss kinetics in metal clusters

    CERN Document Server

    Guillon, C; Fatti, N D; Vallee, F

    2003-01-01

    Ultrafast energy exchanges of a non-Fermi electron gas with the lattice are investigated in silver clusters with sizes ranging from 4 to 26 nm using a femtosecond pump-probe technique. The results yield evidence for a cluster-size-dependent slowing down of the short-time energy losses of the electron gas when it is strongly athermal. A constant rate is eventually reached after a few hundred femtoseconds, consistent with the electron gas internal thermalization kinetics, this behaviour reflecting evolution from an individual to a collective electron-lattice type of coupling. The timescale of this transient regime is reduced in small nanoparticles, in agreement with speeding up of the electron-electron interactions with size reduction. The experimental results are in quantitative agreement with numerical simulations of the electron kinetics.

  4. Medical radiation dosimetry theory of charged particle collision energy loss

    CERN Document Server

    McParland, Brian J

    2014-01-01

    Accurate radiation dosimetry is a requirement of radiation oncology, diagnostic radiology and nuclear medicine. It is necessary so as to satisfy the needs of patient safety, therapeutic and diagnostic optimisation, and retrospective epidemiological studies of the biological effects resulting from low absorbed doses of ionising radiation. The radiation absorbed dose received by the patient is the ultimate consequence of the transfer of kinetic energy through collisions between energetic charged particles and atoms of the tissue being traversed. Thus, the ability of the medical physicist to both measure and calculate accurately patient dosimetry demands a deep understanding of the physics of charged particle interactions with matter. Interestingly, the physics of charged particle energy loss has an almost exclusively theoretical basis, thus necessitating an advanced theoretical understanding of the subject in order to apply it appropriately to the clinical regime. ​ Each year, about one-third of the worl...

  5. Constraints on dark energy with the LOSS SN Ia sample

    CERN Document Server

    Ganeshalingam, Mohan; Filippenko, Alexei V

    2013-01-01

    We present a cosmological analysis of the Lick Observatory Supernova Search (LOSS) Type Ia supernova (SN Ia) photometry sample introduced by Ganeshalingam et al. (2010). These SNe provide an effective anchor point to estimate cosmological parameters when combined with datasets at higher redshift. The data presented by Ganeshalingam et al. (2010) have been rereduced in the natural system of the KAIT and Nickel telescopes to minimise systematic uncertainties. We have run the light-curve-fitting software SALT2 on our natural-system light curves to measure light-curve parameters for LOSS light curves and available SN Ia datasets in the literature. We present a Hubble diagram of 586 SNe in the redshift range z=0.01-1.4 with a residual scatter of 0.176 mag. Of the 226 low-z objects in our sample, 91 objects are from LOSS, including 45 SNe without previously published distances. Assuming a flat Universe, we find that the best fit for the dark energy equation-of-state parameter w = -0.86^+0.13_-0.16 (stat) +- 0.11 (s...

  6. Nonequilibrium thermodynamics and energy efficiency in weight loss diets.

    Science.gov (United States)

    Feinman, Richard D; Fine, Eugene J

    2007-07-30

    Carbohydrate restriction as a strategy for control of obesity is based on two effects: a behavioral effect, spontaneous reduction in caloric intake and a metabolic effect, an apparent reduction in energy efficiency, greater weight loss per calorie consumed. Variable energy efficiency is established in many contexts (hormonal imbalance, weight regain and knock-out experiments in animal models), but in the area of the effect of macronutrient composition on weight loss, controversy remains. Resistance to the idea comes from a perception that variable weight loss on isocaloric diets would somehow violate the laws of thermodynamics, that is, only caloric intake is important ("a calorie is a calorie"). Previous explanations of how the phenomenon occurs, based on equilibrium thermodynamics, emphasized the inefficiencies introduced by substrate cycling and requirements for increased gluconeogenesis. Living systems, however, are maintained far from equilibrium, and metabolism is controlled by the regulation of the rates of enzymatic reactions. The principles of nonequilibrium thermodynamics which emphasize kinetic fluxes as well as thermodynamic forces should therefore also be considered. Here we review the principles of nonequilibrium thermodynamics and provide an approach to the problem of maintenance and change in body mass by recasting the problem of TAG accumulation and breakdown in the adipocyte in the language of nonequilibrium thermodynamics. We describe adipocyte physiology in terms of cycling between an efficient storage mode and a dissipative mode. Experimentally, this is measured in the rate of fatty acid flux and fatty acid oxidation. Hormonal levels controlled by changes in dietary carbohydrate regulate the relative contributions of the efficient and dissipative parts of the cycle. While no experiment exists that measures all relevant variables, the model is supported by evidence in the literature that 1) dietary carbohydrate, via its effect on hormone levels

  7. Nonequilibrium thermodynamics and energy efficiency in weight loss diets

    Directory of Open Access Journals (Sweden)

    Fine Eugene J

    2007-07-01

    Full Text Available Abstract Carbohydrate restriction as a strategy for control of obesity is based on two effects: a behavioral effect, spontaneous reduction in caloric intake and a metabolic effect, an apparent reduction in energy efficiency, greater weight loss per calorie consumed. Variable energy efficiency is established in many contexts (hormonal imbalance, weight regain and knock-out experiments in animal models, but in the area of the effect of macronutrient composition on weight loss, controversy remains. Resistance to the idea comes from a perception that variable weight loss on isocaloric diets would somehow violate the laws of thermodynamics, that is, only caloric intake is important ("a calorie is a calorie". Previous explanations of how the phenomenon occurs, based on equilibrium thermodynamics, emphasized the inefficiencies introduced by substrate cycling and requirements for increased gluconeogenesis. Living systems, however, are maintained far from equilibrium, and metabolism is controlled by the regulation of the rates of enzymatic reactions. The principles of nonequilibrium thermodynamics which emphasize kinetic fluxes as well as thermodynamic forces should therefore also be considered. Here we review the principles of nonequilibrium thermodynamics and provide an approach to the problem of maintenance and change in body mass by recasting the problem of TAG accumulation and breakdown in the adipocyte in the language of nonequilibrium thermodynamics. We describe adipocyte physiology in terms of cycling between an efficient storage mode and a dissipative mode. Experimentally, this is measured in the rate of fatty acid flux and fatty acid oxidation. Hormonal levels controlled by changes in dietary carbohydrate regulate the relative contributions of the efficient and dissipative parts of the cycle. While no experiment exists that measures all relevant variables, the model is supported by evidence in the literature that 1 dietary carbohydrate, via its

  8. Elastic deformation and energy loss of flapping fly wings.

    Science.gov (United States)

    Lehmann, Fritz-Olaf; Gorb, Stanislav; Nasir, Nazri; Schützner, Peter

    2011-09-01

    During flight, the wings of many insects undergo considerable shape changes in spanwise and chordwise directions. We determined the origin of spanwise wing deformation by combining measurements on segmental wing stiffness of the blowfly Calliphora vicina in the ventral and dorsal directions with numerical modelling of instantaneous aerodynamic and inertial forces within the stroke cycle using a two-dimensional unsteady blade elementary approach. We completed this approach by an experimental study on the wing's rotational axis during stroke reversal. The wing's local flexural stiffness ranges from 30 to 40 nN m(2) near the root, whereas the distal wing parts are highly compliant (0.6 to 2.2 nN m(2)). Local bending moments during wing flapping peak near the wing root at the beginning of each half stroke due to both aerodynamic and inertial forces, producing a maximum wing tip deflection of up to 46 deg. Blowfly wings store up to 2.30 μJ elastic potential energy that converts into a mean wing deformation power of 27.3 μW. This value equates to approximately 5.9 and 2.3% of the inertial and aerodynamic power requirements for flight in this animal, respectively. Wing elasticity measurements suggest that approximately 20% or 0.46 μJ of elastic potential energy cannot be recovered within each half stroke. Local strain energy increases from tip to root, matching the distribution of the wing's elastic protein resilin, whereas local strain energy density varies little in the spanwise direction. This study demonstrates a source of mechanical energy loss in fly flight owing to spanwise wing bending at the stroke reversals, even in cases in which aerodynamic power exceeds inertial power. Despite lower stiffness estimates, our findings are widely consistent with previous stiffness measurements on insect wings but highlight the relationship between local flexural stiffness, wing deformation power and energy expenditure in flapping insect wings.

  9. Energy loss for heavy quarks in relation to light partons: is radiative energy loss for heavy quarks anomalous?

    Science.gov (United States)

    Lacey, Roy A; Wei, R; Ajitanand, N N; Alexander, J M; Gong, X; Jia, J; Mawi, A; Mohapatra, S; Reynolds, D; Salnikov, S; Taranenko, A

    2009-10-01

    The scaling properties of jet-suppression measurements are compared for nonphotonic electrons (e+/-) and neutral pions (pi(0)) in Au+Au collisions at sqrt[S(NN)]=200 GeV. For a broad range of transverse momenta and collision centralities, the comparison is consistent with jet quenching dominated by radiative energy loss for both heavy and light partons. Less quenching is indicated for heavy quarks via e+/-; this gives an independent estimate of the transport coefficient q that agrees with its magnitude obtained from quenching of light partons via pi(0)'s.

  10. Modeling and Control of a Photovoltaic Energy System Using the State-Space Averaging Technique

    Directory of Open Access Journals (Sweden)

    Mohd S. Jamri

    2010-01-01

    Full Text Available Problem statement: This study presented the modeling and control of a stand-alone Photovoltaic (PV system using the state-space averaging technique. Approach: The PV module was modeled based on the parameters obtained from a commercial PV data sheet while state-space method is used to model the power converter. A DC-DC boost converter was chosen to step up the input DC voltage of the PV module while the DC-AC single-phase full-bridge square-wave inverter was chosen to convert the input DC comes from boost converter into AC element. The integrated state-space model was simulated under a constant and a variable change of solar irradiance and temperature. In addition to that, maximum power point tracking method was also included in the model to ensure that optimum use of PV module is made. A circuitry simulation was performed under the similar test conditions in order to validate the state-space model. Results: Results showed that the state-space averaging model yields the similar performance as produced by the circuitry simulation in terms of the voltage, current and power generated. Conclusion/Recommendations: The state-space averaging technique is simple to be implemented in modeling and control of either simple or complex system, which yields the similar performance as the results from circuitry method.

  11. Preserving energy resp. dissipation in numerical PDEs using the "Average Vector Field" method

    CERN Document Server

    Celledoni, E; McLachlan, R I; McLaren, D I; O'Neale, D; Owren, B; Quispel, G R W

    2012-01-01

    We give a systematic method for discretizing Hamiltonian partial differential equations (PDEs) with constant symplectic structure, while preserving their energy exactly. The same method, applied to PDEs with constant dissipative structure, also preserves the correct monotonic decrease of energy. The method is illustrated by many examples. In the Hamiltonian case these include: the sine-Gordon, Korteweg-de Vries, nonlinear Schrodinger, (linear) time-dependent Schrodinger, and Maxwell equations. In the dissipative case the examples are: the Allen-Cahn, Cahn-Hilliard, Ginzburg-Landau, and heat equations.

  12. The effect of average cycling current on total energy of lithium-ion batteries for electric vehicles

    Science.gov (United States)

    Barai, Anup; Uddin, Kotub; Widanalage, W. D.; McGordon, Andrew; Jennings, Paul

    2016-01-01

    Predicting the remaining range of a battery reliably, accurately and simply is imperative for effective power management of electrified vehicles and reducing driver anxiety resulting from perceived low driving range. Techniques for predicting the remaining range of an electric vehicle exist; in the best cases they are scaled by factors that account for expected energy losses due to driving style, environmental conditions and the use of on-board energy consuming devices such as air-conditioning. In this work, experimental results that establish the dependence of remaining electrical energy on the vehicle battery immediate cycling history are presented. A method to estimate the remaining energy given short-term cycling history is presented. This method differs from the traditional state of charge methods typically used in battery management systems by considering energy throughput more directly.

  13. Energy loss and (de)coherence effects beyond eikonal approximation

    Energy Technology Data Exchange (ETDEWEB)

    Apolinário, Liliana, E-mail: lilianamarisa.cunha@usc.es [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain); CENTRA, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Armesto, Néstor [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain); Milhano, Guilherme [CENTRA, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Physics Department, Theory Unit, CERN, CH-1211 Genéve 23 (Switzerland); Salgado, Carlos A. [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain)

    2014-11-15

    The parton branching process is known to be modified in the presence of a medium. Colour decoherence processes are known to determine the process of energy loss when the density of the medium is large enough to break the correlations between partons emitted from the same parent. In order to improve existing calculations that consider eikonal trajectories for both the emitter and the hardest emitted parton, we provide in this work the calculation of all finite energy corrections for the gluon radiation off a quark in a QCD medium that exist in the small angle approximation and for static scattering centres. Using the path integral formalism, all particles are allowed to undergo Brownian motion in the transverse plane and the offspring is allowed to carry an arbitrary fraction of the initial energy. The result is a general expression that contains both coherence and decoherence regimes that are controlled by the density of the medium and by the amount of broadening that each parton acquires independently.

  14. Nicotinamide prevents ultraviolet radiation-induced cellular energy loss.

    Science.gov (United States)

    Park, Joohong; Halliday, Gary M; Surjana, Devita; Damian, Diona L

    2010-01-01

    UV radiation is carcinogenic by causing mutations in the skin and also by suppressing cutaneous antitumor immunity. We previously found nicotinamide (vitamin B3) to be highly effective at reducing UV-induced immunosuppression in human volunteers, with microarray studies on in vivo irradiated human skin suggesting that nicotinamide normalizes subsets of apoptosis, immune function and energy metabolism-related genes that are downregulated by UV exposure. Using human adult low calcium temperature keratinocytes, we further investigated nicotinamide's effects on cellular energy metabolism. We found that nicotinamide prevented UV-induced cellular ATP loss and protected against UV-induced glycolytic blockade. To determine whether nicotinamide alters the effects of UV-induced oxidative stress posttranslationally, we also measured UV-induced reactive oxygen species (ROS). Nicotinamide had no effect on ROS formation, and at the low UV doses used in these studies, equivalent to ambient daily sun exposure, there was no evidence of apoptosis. Hence, nicotinamide appears to exert its UV protective effects on the skin via its role in cellular energy pathways.

  15. Energy loss and (de)coherence effects beyond eikonal approximation

    CERN Document Server

    Apolinário, Liliana; Milhano, Guilherme; Salgado, Carlos A.

    2014-01-01

    The parton branching process is known to be modified in the presence of a medium. Colour decoherence processes are known to determine the process of energy loss when the density of the medium is large enough to break the correlations between partons emitted from the same parent. In order to improve existing calculations that consider eikonal trajectories for both the emitter and the hardest emitted parton, we provide in this work, the calculation of all finite energy corrections for the gluon radiation off a quark in a QCD medium that exist in the small angle approximation and for static scattering centres. Using the path integral formalism, all particles are allowed to undergo Brownian motion in the transverse plane and the offspring allowed to carry an arbitrary fraction of the initial energy. The result is a general expression that contains both coherence and decoherence regimes that are controlled by the density of the medium and by the amount of broadening that each parton acquires independently.

  16. Energy loss and (de)coherence effects beyond eikonal approximation

    Science.gov (United States)

    Apolinário, Liliana; Armesto, Néstor; Milhano, Guilherme; Salgado, Carlos A.

    2014-11-01

    The parton branching process is known to be modified in the presence of a medium. Colour decoherence processes are known to determine the process of energy loss when the density of the medium is large enough to break the correlations between partons emitted from the same parent. In order to improve existing calculations that consider eikonal trajectories for both the emitter and the hardest emitted parton, we provide in this work the calculation of all finite energy corrections for the gluon radiation off a quark in a QCD medium that exist in the small angle approximation and for static scattering centres. Using the path integral formalism, all particles are allowed to undergo Brownian motion in the transverse plane and the offspring is allowed to carry an arbitrary fraction of the initial energy. The result is a general expression that contains both coherence and decoherence regimes that are controlled by the density of the medium and by the amount of broadening that each parton acquires independently.

  17. High resolution electron energy loss spectroscopy with two-dimensional energy and momentum mapping

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Xuetao; Cao, Yanwei; Zhang, Shuyuan; Jia, Xun; Guo, Qinlin; Yang, Fang [Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Zhu, Linfan [Hefei National Laboratory for Physical Sciences at Microscale and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhang, Jiandi; Plummer, E. W. [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, Louisiana 70808 (United States); Guo, Jiandong, E-mail: jdguo@iphy.ac.cn [Beijing National Laboratory for Condensed Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Collaborative Innovation Center of Quantum Matter, Beijing 100871 (China)

    2015-08-15

    High resolution electron energy loss spectroscopy (HREELS) is a powerful technique to probe vibrational and electronic excitations at surfaces. The dispersion relation of surface excitations, i.e., energy as a function of momentum, has in the past, been obtained by measuring the energy loss at a fixed angle (momentum) and then rotating sample, monochromator, or analyzer. Here, we introduce a new strategy for HREELS, utilizing a specially designed lens system with a double-cylindrical Ibach-type monochromator combined with a commercial VG Scienta hemispherical electron energy analyzer, which can simultaneously measure the energy and momentum of the scattered electrons. The new system possesses high angular resolution (<0.1°), detecting efficiency and sampling density. The capabilities of this system are demonstrated using Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+δ}. The time required to obtain a complete dispersion spectrum is at least one order of magnitude shorter than conventional spectrometers, with improved momentum resolution and no loss in energy resolution.

  18. ANALYSIS OF STORAGE SYSYTEM INFLUENCE ON ENERGY LOSSES IN POWER SYSTEM (Part 1

    Directory of Open Access Journals (Sweden)

    A. M. Golubev

    2014-01-01

    Full Text Available The paper proposes methodology  for evaluation of storage  system influence on energy losses. The methodology makes it possible to investigate  influence of some operational modes of devices on energy losses for a wide range of variants pertaining to reset conditions. The paper provides mathematical dependences that determine criteria for maximization of energy loss reduction.

  19. (e, 3e) reactions at moderate energies visualization of average field effects in atom

    CERN Document Server

    Kuzakov, K A; Gusev, A A; Popov, Y V; Vinitsky, S I

    2002-01-01

    In the case of helium atom the theory is presented for quasi-elastic A (e, 3e) A sup + sup + and A (e, 3 -1e) A sup + sup + atomic reactions in the coplanar symmetric geometry at incident electron energy of several hundreds eV. The comparison with the recent (e, 3 - 1 e) experiment has allowed one to observe the effect of the mean atomic field as well as postcollisional effects.

  20. THREE-PHASE ENERGY SUPPLY SYSTEMS SIMULATION FOR THE TOTAL POWER LOSSES COMPONENTS ASSESSMENT

    Directory of Open Access Journals (Sweden)

    D.V. Tugay

    2016-09-01

    Full Text Available Purpose. The goal is to optimize a structure of Matlab-model of the three-phase energy supply system with power active filter. The mathematical model that describes the energy supply system modes of operation which contains additional losses is proposed. Methodology. We have applied concepts of the electrical circuits theory, mathematical modeling elements based on linear algebra and vector calculus, mathematical simulation in Matlab package. Results. We have developed two models of three-phase energy supply system. The first one is based on a vector representation, and the second one on the matrix representation of energy processes. Using these models we have solved the problem of maintaining unchanged the average useful power for 279 cases of energy supply system modes of operation. Originality. We have developed methods of mathematical analysis of a three-phase energy supply systems with polyharmonic voltages and currents in the symmetric and asymmetric modes. Practical value. We have created Matlab-model of a three-phase energy supply system with automated calculation of a correction factor. It allows reducing more than one order the time for energy processes elucidation in multiphase systems.

  1. Electron energy-loss spectroscopy of branched gap plasmon resonators

    Science.gov (United States)

    Raza, Søren; Esfandyarpour, Majid; Koh, Ai Leen; Mortensen, N. Asger; Brongersma, Mark L.; Bozhevolnyi, Sergey I.

    2016-12-01

    The miniaturization of integrated optical circuits below the diffraction limit for high-speed manipulation of information is one of the cornerstones in plasmonics research. By coupling to surface plasmons supported on nanostructured metallic surfaces, light can be confined to the nanoscale, enabling the potential interface to electronic circuits. In particular, gap surface plasmons propagating in an air gap sandwiched between metal layers have shown extraordinary mode confinement with significant propagation length. In this work, we unveil the optical properties of gap surface plasmons in silver nanoslot structures with widths of only 25 nm. We fabricate linear, branched and cross-shaped nanoslot waveguide components, which all support resonances due to interference of counter-propagating gap plasmons. By exploiting the superior spatial resolution of a scanning transmission electron microscope combined with electron energy-loss spectroscopy, we experimentally show the propagation, bending and splitting of slot gap plasmons.

  2. Single-atom electron energy loss spectroscopy of light elements

    Science.gov (United States)

    Senga, Ryosuke; Suenaga, Kazu

    2015-01-01

    Light elements such as alkali metal (lithium, sodium) or halogen (fluorine, chlorine) are present in various substances and indeed play significant roles in our life. Although atomic behaviours of these elements are often a key to resolve chemical or biological activities, they are hardly visible in transmission electron microscope because of their smaller scattering power and higher knock-on probability. Here we propose a concept for detecting light atoms encaged in a nanospace by means of electron energy loss spectroscopy using inelastically scattered electrons. In this method, we demonstrate the single-atom detection of lithium, fluorine, sodium and chlorine with near-atomic precision, which is limited by the incident probe size, signal delocalization and atomic movement in nanospace. Moreover, chemical shifts of lithium K-edge have been successfully identified with various atomic configurations in one-dimensional lithium compounds. PMID:26228378

  3. Single-atom electron energy loss spectroscopy of light elements.

    Science.gov (United States)

    Senga, Ryosuke; Suenaga, Kazu

    2015-07-31

    Light elements such as alkali metal (lithium, sodium) or halogen (fluorine, chlorine) are present in various substances and indeed play significant roles in our life. Although atomic behaviours of these elements are often a key to resolve chemical or biological activities, they are hardly visible in transmission electron microscope because of their smaller scattering power and higher knock-on probability. Here we propose a concept for detecting light atoms encaged in a nanospace by means of electron energy loss spectroscopy using inelastically scattered electrons. In this method, we demonstrate the single-atom detection of lithium, fluorine, sodium and chlorine with near-atomic precision, which is limited by the incident probe size, signal delocalization and atomic movement in nanospace. Moreover, chemical shifts of lithium K-edge have been successfully identified with various atomic configurations in one-dimensional lithium compounds.

  4. Calculated and experimental low-loss electron energy loss spectra of dislocations in diamond and GaN

    CERN Document Server

    Jones, R; Gutiérrez-Sosa, A; Bangert, U; Heggie, M I; Blumenau, A T; Frauenheim, T; Briddon, P R

    2002-01-01

    First-principles calculations of electron energy loss (EEL) spectra for bulk GaN and diamond are compared with experimental spectra acquired with a scanning tunnelling electron microscope offering ultra-high-energy resolution in low-loss energy spectroscopy. The theoretical bulk low-loss EEL spectra, in the E sub g to 10 eV range, are in good agreement with experimental data. Spatially resolved spectra from dislocated regions in both materials are distinct from bulk spectra. The main effects are, however, confined to energy losses lying above the band edge. The calculated spectra for low-energy dislocations in diamond are consistent with the experimental observations, but difficulties remain in understanding the spectra of threading dislocations in GaN.

  5. Energy Loss Effect in High-Energy Drell-Yan Dimuon Process

    Institute of Scientific and Technical Information of China (English)

    DUAN Chun-Gui; WANG Hong-Min

    2002-01-01

    By means of the nuclear parton distribution obtained from DGLAP equation,measured Drell Yan production cross sections for 800 GeV proton incident on a variety of nuclear targets are analyzed within Glauber framework which takes into account energy loss of the beam proton.It is shown that the theoretical results are in good agreement with the FNAL E866.

  6. The Fracture Influence on the Energy Loss of Compressed Air Energy Storage in Hard Rock

    Directory of Open Access Journals (Sweden)

    Hehua Zhu

    2015-01-01

    Full Text Available A coupled nonisothermal gas flow and geomechanical numerical modeling is conducted to study the influence of fractures (joints on the complex thermohydromechanical (THM performance of underground compressed air energy storage (CAES in hard rock caverns. The air-filled chamber is modeled as porous media with high porosity, high permeability, and high thermal conductivity. The present analysis focuses on the CAES in hard rock caverns at relatively shallow depth, that is, ≤100 m, and the pressure in carven is significantly higher than ambient pore pressure. The influence of one discrete crack and multiple crackson energy loss analysis of cavern in hard rock media are carried out. Two conditions are considered during each storage and release cycle, namely, gas injection and production mass being equal and additional gas injection supplemented after each cycle. The influence of the crack location, the crack length, and the crack open width on the energy loss is studied.

  7. Structural Variations to a Donor Polymer with Low Energy Losses

    KAUST Repository

    Bazan, Guillermo C

    2017-08-01

    Two regioregular narrow band gap conjugated polymers with a D’-A-D-A repeat unit architecture, namely PIFCF and PSFCF, were designed and synthesized. Both polymers contain strictly organized fluorobenzo[c][1,2,5]thiadiazole (FBT) orientations and different solubilizing side chains for solution processing. Compared to the previously reported asymmetric pyridyl-[2,1,3]thiadiazole (PT) based regioregular polymer, namely PIPCP, PIFCF and PSFCF exhibit wider band gaps, tighter π-π stacking, and improved hole mobilities. When incorporated into solar cells with fullerene acceptors, the Eloss = Eg - eVoc values of PIFCF and PSFCF devices are increased compared to solar cells based on PIPCP. Determination of Ect in these solar cells reveals that, relative to PIPCP, PIFCF solar cells lose more energy from Eg - Ect, and PSFCF solar cells lose more energy from both Eg - Ect and Ect - eVoc. The close structural relationship between PIPCP and PIFCF provides an excellent framework to establish molecular features that impact the relationship between Eg and Ect. Theoretical calculations predict that Eloss of PIFCF:PC61BM would be higher than in the case of PIPCP:PC61BM, due to greater Eg - Ect. These findings provide insight into the design of high performance, low voltage loss photovoltaic polymeric materials with desirable optoelectronic properties.

  8. Method of Sum of Power Losses as a Way for Determining the ki Coefficients of Energy Losses in Hydraulic Motor

    Directory of Open Access Journals (Sweden)

    Maczyszyn A.

    2016-04-01

    Full Text Available This paper shows application of the method of sum of power losses to determining energy losses which occur in hydraulic rotary motor in situation when not all laboratory data are at one’s disposal or when no use is made of data contained in catalogue charts. The method makes it possible to determine the coefficients, ki, of energy losses occurring in the motor. The method of sum of power losses is based on the approach proposed by Z. Paszota, in the papers [3 ÷ 9]. It consists in adding power flow of energy losses occurring in the motor to power flow output and comparing the sum to the power flow input. Application of the method is exemplified by using a A6VM hydraulic motor.

  9. An Experimental Study of Pile-Supported OWC-Type Breakwaters: Energy Extraction and Vortex-Induced Energy Loss

    Directory of Open Access Journals (Sweden)

    Fang He

    2016-07-01

    Full Text Available Integrating wave energy converters with breakwaters is a promising concept for wave energy utilization. On the basis of fulfilling the wave protection demands, pile-supported Oscillating Water Column (OWC-type breakwaters can also meet the local needs of electricity far from the lands. In the present study, the wave energy extraction and vortex-induced energy loss of pile-supported OWC-type breakwaters were analyzed based on a two-point measurement method. The importance of energy extraction and vortex-induced energy loss on the wave energy dissipation of pile-supported OWC-type breakwaters were experimentally investigated. It was found that the trends of energy extraction and vortex-induced energy loss were generally correlated. The effects of the pneumatic damping induced by top opening affected the vortex-induced energy loss more than the energy extraction. Results showed that a larger pneumatic damping was preferable for the purpose of increasing energy extraction, whereas for a smaller pneumatic damping the vortex-induced energy loss was more important to the energy dissipation. With increasing draft, the energy extraction decreased, but the vortex-induced energy loss complementally contributed to the total energy dissipation and made the energy dissipation at the same level as that for a shallower draft.

  10. Molecular calculations of excitation energies and (hyper)polarizabilities with a statistical average of orbital model exchange-correlation potentials

    Science.gov (United States)

    Schipper, P. R. T.; Gritsenko, O. V.; van Gisbergen, S. J. A.; Baerends, E. J.

    2000-01-01

    An approximate Kohn-Sham exchange-correlation potential νxcSAOP is developed with the method of statistical averaging of (model) orbital potentials (SAOP) and is applied to the calculation of excitation energies as well as of static and frequency-dependent multipole polarizabilities and hyperpolarizabilities within time-dependent density functional theory (TDDFT). νxcSAOP provides high quality results for all calculated response properties and a substantial improvement upon the local density approximation (LDA) and the van Leeuwen-Baerends (LB) potentials for the prototype molecules CO, N2, CH2O, and C2H4. For the first three molecules and the lower excitations of the C2H4 the average error of the vertical excitation energies calculated with νxcSAOP approaches the benchmark accuracy of 0.1 eV for the electronic spectra.

  11. Accounting for disagreements on average cone loss rates in retinitis pigmentosa with a new kinetic model: Its relevance for clinical trials.

    Science.gov (United States)

    Baumgartner, W A; Baumgartner, A M

    2016-04-01

    Since 1985, at least nine studies of the average rate of cone loss in retinitis pigmentosa (RP) populations have yielded conflicting average rate constant values (-k), differing by 90-160%. This is surprising, since, except for the first two investigations, the Harvard or Johns Hopkins' protocols used in these studies were identical with respect to: use of the same exponential decline model, calculation of average -k from individual patient k values, monitoring patients over similarly large time frames, and excluding data exhibiting floor and ceiling effects. A detailed analysis of Harvard's and Hopkins' protocols and data revealed two subtle differences: (i) Hopkins' use of half-life t0.5 (or t(1/e)) for expressing patient cone-loss rates rather than k as used by Harvard; (ii) Harvard obtaining substantially more +k from improving fields due to dormant-cone recovery effects and "small -k" values than Hopkins' ("small -k" is defined as less than -0.040 year(-1)), e.g., 16% +k, 31% small -k, vs. Hopkins' 3% and 6% respectively. Since t0.5=0.693/k, it follows that when k=0, or is very small, t0.5 (or t(1/e)) is respectively infinity or a very large number. This unfortunate mathematical property (which also prevents t0.5 (t(1/e)) histogram construction corresponding to -k to +k) caused Hopkins' to delete all "small -k" and all +k due to "strong leverage". Naturally this contributed to Hopkins' larger average -k. Difference (ii) led us to re-evaluate the Harvard/Hopkins' exponential unchanging -k model. In its place we propose a model of increasing biochemical stresses from dying rods on cones during RP progression: increasing oxidative stresses and trophic factor deficiencies (e.g., RdCVF), and RPE malfunction. Our kinetic analysis showed rod loss to follow exponential kinetics with unchanging -k due to constant genetic stresses, thereby providing a theoretical basis for Clarke et al.'s empirical observation of such kinetics with eleven animal models of RP. In

  12. Current long-term negative average annual energy balance of the earth leads to the new little ice age

    Directory of Open Access Journals (Sweden)

    Abdussamatov Habibullo

    2015-01-01

    Full Text Available The average annual decreasing rate of the total solar irradiance (TSI is increasing from the 22-nd to the 23-rd and 24-th cycles, because the Sun since the 1990 is in the phase decline of quasi-bicentennial variation. The portion of the solar energy absorbed by the Earth is decreasing. Decrease in the portion of TSI absorbed by the Earth since 1990 remains uncompensated by the Earth's radiation into space at the previous high level over a time interval determined by the thermal inertia of the Ocean. A long-term negative deviation of the Earth’s average annual energy balance from the equilibrium state is dictating corresponding variations in it’s the energy state. As a result, the Earth will have a negative average annual energy balance also in the future. This will lead to the beginning of the decreasing in the Earth's temperature and of the epoch of the Little Ice Age after the maximum phase of the 24-th solar cycle approximately since the end of 2014. The influence of the consecutive chain of the secondary feedback effects (the increase in the Bond albedo and the decrease in the concentration of greenhouse gases in the atmosphere due to cooling will lead to an additional reduction of the absorbed solar energy and reduce the greenhouse effect. The start of the TSI’s Grand Minimum is anticipated in the solar cycle 27±1 in 2043±11 and the beginning of the phase of deep cooling of the 19th Little Ice Age for the past 7,500 years around 2060±11.

  13. Daily energy expenditure, physical activity, and weight loss in Parkinson's disease patients

    Science.gov (United States)

    Patients with Parkinson's disease (PD) commonly exhibit weight loss (WL) which investigators attribute to various factors, including elevated energy expenditure. We tested the hypothesis that daily energy expenditure (DEE) and its components, resting energy expenditure (REE) and physical activity (P...

  14. Parametric study of minimum converter loss in an energy-storage dc-to-dc converter

    Science.gov (United States)

    Wong, R. C.; Owen, H. A., Jr.; Wilson, T. G.

    1982-01-01

    Through a combination of analytical and numerical minimization procedures, a converter design that results in the minimum total converter loss (including core loss, winding loss, capacitor and energy-storage-reactor loss, and various losses in the semiconductor switches) is obtained. Because the initial phase involves analytical minimization, the computation time required by the subsequent phase of numerical minimization is considerably reduced in this combination approach. The effects of various loss parameters on the optimum values of the design variables are also examined.

  15. Low energy electron loss peaks of CuInTe/sub 2/

    Energy Technology Data Exchange (ETDEWEB)

    Kleint, C. (Karl-Marx-Universitaet, Leipzig (German Democratic Republic). Sektion Physik); Schulze, S. (Technische Hochschule, Karl-Marx-Stadt (German Democratic Republic). Sektion Physik/Elektronische Bauelemente); Tomlinson, R.D. (Salford Univ. (UK). Dept. of Electrical Engineering)

    1982-09-01

    Reflection low energy electron loss spectra were observed from CuInTe/sub 2/ monocrystals. The spectra were taken with a LEED system to obtain the first derivative of the scattered electron energy distribution using primary energies of 50, 90, and 190 eV. The second derivative and the loss maxima energies have been determined after a smoothing procedure. The loss peaks are coordinated to plasmon features, surfaces states, and interband transitions.

  16. IDENTIFIKASI SPEECH RECOGNITION MANUSIA DENGAN MENGGUNAKAN AVERAGE ENERGY DAN SILENT RATIO SEBAGAI FEATURE EXTRACTION SUARA PADA KOMPUTER

    Directory of Open Access Journals (Sweden)

    Wawan Kurniawan

    2016-01-01

    Full Text Available Abstrak Biometric recognition merupakan sistem pengenalan  atau identifikasi seseorang  berdasarkan karakteristik  biologis khusus yang dimiliki oleh orang tersebut, fungsinya  untuk sistem keamanan  dengan  mengenali identitas seseorang. Speech recognition merupakan suatu  proses yang dilakukan  komputer untuk mengenali kata yang diucapkan oleh  seseorang tanpa mempedulikan identitas orang terkait. Pola peningkatan dan penurunan signal suara merupakan ciri khas (feature extraction dari seseorang dalam hal berbicara , sehingga antara energy rata-rata (Average Energy bunyi  dan lamanya ambang diam  (Silent Ratio merupakan faktor yang terpenting untuk mendeteksi karakter dan pola suara seseorang. Sedangkan proses algoritma Fourier Frequency Transform (FFT digunakan untuk mengcirikan komponen-komponen data pada domain frekuensi. Hasil pengujian yaitu menunjukkan bahwa suara seseorang yang direkam dengan durasi dua detik kemudian dilakukan pembagian sinyal gelombang selama 0,2 detik diperoleh besarnya Average energy adalah 2.323 dan proses Silent ratio sebesar 0.249. Kedua nilai tersebut merupakan feature extraction suara seseorang yang dapat dikenali oleh komputer.   Kata kunci: Avarege Energy, Fourier Frequency Transform, Speech recognition, Silent Ratio

  17. Energy-loss measurement with the ZEUS Central Tracking Detector

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, D.

    2007-05-15

    The measurement of the specific energy loss due to ionisation, dE/dx, in a drift chamber is a very important tool for particle identification in final states of reactions between high energetic particles. Such identification requires a well understood dE/dx measurement including a precise knowledge of its uncertainties. Exploiting for the first time the full set of ZEUS data from the HERA operation between 1996 and 2005 twelve detector-related influences affecting the dE/dx measurement of the ZEUS Central Tracking Detector have been identified, separately studied and parameterised. A sophisticated iterative procedure has been developed to correct for these twelve effects, which takes into account the correlations between them. A universal parameterisation of the detector-specific Bethe-Bloch curve valid for all particle species has been extracted. In addition, the various contributions to the measurement uncertainty have been disentangled and determined. This yields the best achievable prediction for the single-track dE/dx resolution. For both the analysis of the measured data and the simulation of detector performance, the detailed understanding of the measurement and resolution of dE/dx gained in this work provides a tool with optimum power for particle identification in a physics studies. (orig.)

  18. Sensitivity of the total heat loss coefficient determined by the energy signature approach to different time periods and gained energy

    Energy Technology Data Exchange (ETDEWEB)

    Sjoegren, J.-U.; Andersson, S.; Olofsson, T. [Department of Applied Physics and Electronics, Umeaa University, SE-901 87 Umeaa (Sweden)

    2009-07-15

    energy if the analysis is limited to October-March, the period of the year when the solar radiation in Sweden yields a minor contribution to heating. The results for the total heat loss coefficient were also compared to the calculations performed in the design stage; it was found that K{sub tot} was on average 20% larger and that the contribution to heating from solar radiation was substantially lower than predicted. For the indoor temperature, however, the utilised energy had a large impact. With access to an estimate of K{sub tot} and T{sub i}, an improved evaluation of the energy performance may be achieved in the Swedish real estate market. At present the measure commonly used, despite the fact that monthly data is available, is the annual use of energy for space heating per square metre of area to let. (author)

  19. Relativistic X-ray reverberation modelling of the combined time-averaged and lag-energy spectra in AGN

    CERN Document Server

    Chainakun, P; Kara, E

    2016-01-01

    General relativistic ray tracing simulations of the time-averaged spectrum and energy-dependent time delays in AGN are presented. We model the lamp-post geometry in which the accreting gas is illuminated by an X-ray source located on the rotation axis of the black hole. The spectroscopic features imprinted in the reflection component are modelled using REFLIONX. The associated time delays after the direct continuum, known as reverberation lags, are computed including the full effects of dilution and ionization gradients on the disc. We perform, for the first time, simultaneous fitting of the time-averaged and lag-energy spectra in three AGN: Mrk 335, IRAS 13224-3809 and Ark 564 observed with XMM-Newton. The best fitting source height and central mass of each AGN partly agree with those previously reported. We find that including the ionization gradient in the model naturally explains lag-energy observations in which the 3 keV and 7-10 keV bands precede other bands. To obtain the clear 3 keV and 7-10 keV dips ...

  20. Bipolar energy-loss measurements on cryostable, low-loss conductors

    Science.gov (United States)

    Wollan, J. J.

    1981-11-01

    Losses have been measured on a prototype conductor for the 20 MJ coil for conditions which simulate closely the actual coil field sweep. The data on the prototype II conductor indicates coil losses which exceed the coil specification. The application of certain correction factors reduces the projected losses within the specification for a 2 s reversal but not for a 1 s reversal. Verification of these corrections await measurements on the actual strand and completion of coil construction and testing.

  1. Bipolar energy-loss measurements on cryostable, low-loss conductors

    Energy Technology Data Exchange (ETDEWEB)

    Wollan, J.J.

    1981-01-01

    Losses have been measured on a prototype conductor for the 20 MJ coil for conditions which simulate closely the actual coil field sweep. The data on the prototype II conductor indicates coil losses which exceed the coil specification. The application of certain correction factors reduces the projected losses within the specification for a 2 s reversal but not for a 1 s reversal. Verification of these corrections await measurements on the actual strand and completion of coil construction and testing.

  2. Constraining the density dependence of the symmetry energy using the multiplicity and average pT ratios of charged pions

    Science.gov (United States)

    Cozma, M. D.

    2017-01-01

    The charged pion multiplicity ratio in intermediate-energy heavy-ion collisions, a probe of the density dependence of symmetry energy above the saturation point, has been proven in a previous study to be extremely sensitive to the strength of the isovector Δ (1232 ) potential in nuclear matter. As there is no knowledge, either from theory or experiment, about the magnitude of this quantity, the extraction of constraints on the slope of the symmetry energy at saturation by using exclusively the mentioned observable is hindered at present. It is shown that, by including the ratio of average pT of charged pions / in the list of fitted observables, the noted problem can be circumvented. A realistic description of this observable requires accounting for the interaction of pions with the dense nuclear matter environment by the incorporation of the so-called S -wave and P -wave pion optical potentials. This is performed within the framework of a quantum molecular dynamics transport model that enforces the conservation of the total energy of the system. It is shown that constraints on the slope of the symmetry energy at saturation density and the strength of the Δ (1232) potential can be simultaneously extracted. A symmetry energy with a value of the slope parameter L >50 MeV is favored, at 1 σ confidence level, from a comparison with published FOPI experimental data. A precise constraint will require experimental data more accurate than presently available, particularly for the charged pion multiplicity ratio, and better knowledge of the density and momentum dependence of the pion potential for the whole range of these two variables probed in intermediate-energy heavy-ion collisions.

  3. Trends in bond dissociation energies of alcohols and aldehydes computed with multireference averaged coupled-pair functional theory.

    Science.gov (United States)

    Oyeyemi, Victor B; Keith, John A; Carter, Emily A

    2014-05-01

    As part of our ongoing investigation of the combustion chemistry of oxygenated molecules using multireference correlated wave function methods, we report bond dissociation energies (BDEs) in C1-C4 alcohols (from methanol to the four isomers of butanol) and C1-C4 aldehydes (from methanal to butanal). The BDEs are calculated with a multireference averaged coupled-pair functional-based scheme. We compare these multireference BDEs with those derived from experiment and single-reference methods. Trends in BDEs for the alcohols and aldehydes are rationalized by considering geometry relaxations of dissociated radical fragments, resonance stabilization, and hyperconjugation. Lastly, we discuss the conjectured association between bond strengths and rates of hydrogen abstraction by hydroxyl radicals. In general, abstraction reaction rates are higher at sites where the C-H bond energies are lower (and vice versa). However, comparison with available rate data shows this inverse relationship between bond strengths and abstraction rates does not hold at all temperatures.

  4. Collisional Energy Loss of a Heavy Quark in an Anisotropic Quark-Gluon Plasma

    CERN Document Server

    Romatschke, P; Romatschke, Paul; Strickland, Michael

    2004-01-01

    We compute the leading-order collisional energy loss of a heavy quark propagating through a quark-gluon plasma in which the quark and gluon distributions are anisotropic in momentum space. Following the calculation outlined for QED in an earlier work we indicate the differences encountered in QCD and their effect on the collisional energy loss results. For a 20 GeV bottom quark we show that momentum space anisotropies can result in the collisional heavy quark energy loss varying with the angle of propagation by up to 50%. For low velocity quarks we show that anisotropies result in energy gain instead of energy loss with the energy gain focused in such a way as to accelerate particles along the anisotropy direction thereby reducing the momentum-space anisotropy. The origin of this negative energy loss is explicitly identified as being related to the presence of plasma instabilities in the system.

  5. Generalization of radiative jet energy loss to non-zero magnetic mass

    Energy Technology Data Exchange (ETDEWEB)

    Djordjevic, Magdalena, E-mail: magda@ipb.ac.rs [Institute of Physics Belgrade, University of Belgrade (Serbia); Djordjevic, Marko [Faculty of Biology, University of Belgrade (Serbia)

    2012-03-19

    Reliable predictions for jet quenching in ultra-relativistic heavy ion collisions require accurate computation of radiative energy loss. While all available energy loss formalisms assume zero magnetic mass - in accordance with the one-loop perturbative calculations - different non-perturbative approaches report a non-zero magnetic mass at RHIC and LHC. We here generalize a recently developed energy loss formalism in a realistic finite size QCD medium, to consistently include a possibility for existence of non-zero magnetic screening. We also present how the inclusion of finite magnetic mass changes the energy loss results. Our analysis suggests a fundamental constraint on magnetic to electric mass ratio.

  6. Stellar energy loss rates in the pair-annihilation process beyond the standard model

    Science.gov (United States)

    Hernández-Ruíz, M. A.; Gutiérrez-Rodríguez, A.; González-Sánchez, A.

    2017-01-01

    We calculate the stellar energy loss due to neutrino-pair production in e+e- annihilation in the context of a 331 model, a left-right symmetric model and a simplest little Higgs model in a way that can be used in supernova calculations. We also present some simple estimates which show that such process can act as an efficient energy loss mechanism in the shocked supernova core. We find that the stellar energy loss is almost independent of the parameters of the models in the allowed range for these parameters. This work complements other studies on the stellar energy loss rate in e+e- annihilation.

  7. Derivation of dielectric function and inelastic mean free path from photoelectron energy-loss spectra of amorphous carbon surfaces

    Science.gov (United States)

    David, Denis; Godet, Christian

    2016-11-01

    Photoelectron Energy Loss Spectroscopy (PEELS) is a highly valuable non destructive tool in applied surface science because it gives access to both chemical composition and electronic properties of surfaces, including the near-surface dielectric function. An algorithm is proposed for real materials to make full use of experimental X-ray photoelectron spectra (XPS). To illustrate the capabilities and limitations of this algorithm, the near-surface dielectric function ε(ℏω) of a wide range of amorphous carbon (a-C) thin films is derived from energy losses measured in XPS, using a dielectric response theory which relates ε(ℏω) and the bulk plasmon (BP) loss distribution. Self-consistent separation of bulk vs surface plasmon excitations, deconvolution of multiple BP losses and evaluation of Bethe-Born sensitivity factors for bulk and surface loss distributions are crucial to obtain several material parameters: (1) energy loss function for BP excitation, (2) dielectric function of the near-surface material (3-5 nm depth sensitivity), (3) inelastic mean free path, λP (E0), for plasmon excitation, (4) surface excitation parameter, (5) effective number NEFF of valence electrons participating in the plasma oscillation. This photoelectron energy loss spectra analysis has been applied to a-C and a-C:H films grown by physical and chemical methods with a wide range of (sp3/sp2 + sp3) hybridization, optical gap and average plasmon energy values. Different methods are assessed to accurately remove the photoemission peak tail at low loss energy (0-10 eV) due to many-body interactions during the photo-ionization process. The σ + π plasmon excitation represents the main energy-loss channel in a-C; as the C atom density decreases, λP (970 eV) increases from 1.22 nm to 1.6 nm, assuming a cutoff plasmon wavenumber given by a free electron model. The π-π* and σ-σ* transitions observed in the retrieved dielectric function are discussed as a function of the average (sp3/sp

  8. Compact Source of Electron Beam with Energy of 200 kEv and Average Power of 2 kW

    CERN Document Server

    Kazarezov, Ivan; Balakin, Vladimir E; Bryazgin, Alex; Bulatov, Alexandre; Glazkov, Ivan; Kokin, Evgeny; Krainov, Gennady; Kuznetsov, Gennady I; Molokoedov, Andrey; Tuvik, Alfred

    2005-01-01

    The paper describes a compact electron beam source with average electron energy of 200 keV. The source operates with pulse power up to 2 MW under average power not higher than 2 kW, pulsed beam current up to 10 A, pulse duration up to 2 mks, and repetition rate up to 5 kHz. The electron beam is extracted through aluminium-beryllium alloy foil. The pulse duration and repetition rate can be changed from control desk. High-voltage generator for the source with output voltage up to 220 kV is realized using the voltage-doubling circuit which consists of 30 sections. The insulation type - gas, SF6 under pressure of 8 atm. The cooling of the foil supporting tubes is provided by a water-alcohol mixture from an independent source. The beam output window dimensions are 180?75 mm, the energy spread in the beam +10/-30%, the source weight is 80 kg.

  9. Self-Directed Weight Loss Strategies: Energy Expenditure Due to Physical Activity Is Not Increased to Achieve Intended Weight Loss

    Directory of Open Access Journals (Sweden)

    Ulf Elbelt

    2015-07-01

    Full Text Available Reduced physical activity and almost unlimited availability of food are major contributors to the development of obesity. With the decline of strenuous work, energy expenditure due to spontaneous physical activity has attracted increasing attention. Our aim was to assess changes in energy expenditure, physical activity patterns and nutritional habits in obese subjects aiming at self-directed weight loss. Methods: Energy expenditure and physical activity patterns were measured with a portable armband device. Nutritional habits were assessed with a food frequency questionnaire. Results: Data on weight development, energy expenditure, physical activity patterns and nutritional habits were obtained for 105 patients over a six-month period from an initial cohort of 160 outpatients aiming at weight loss. Mean weight loss was −1.5 ± 7.0 kg (p = 0.028. Patients with weight maintenance (n = 75, with substantial weight loss (>5% body weight, n = 20 and with substantial weight gain (>5% body weight, n = 10 did not differ in regard to changes of body weight adjusted energy expenditure components (total energy expenditure: −0.2 kcal/kg/day; non-exercise activity thermogenesis: −0.3 kcal/kg/day; exercise-related activity thermogenesis (EAT: −0.2 kcal/kg/day or patterns of physical activity (duration of EAT: −2 min/day; steps/day: −156; metabolic equivalent unchanged measured objectively with a portable armband device. Self-reported consumption frequency of unfavorable food decreased significantly (p = 0.019 over the six-month period. Conclusions: An increase in energy expenditure or changes of physical activity patterns (objectively assessed with a portable armband device are not employed by obese subjects to achieve self-directed weight loss. However, modified nutritional habits could be detected with the use of a food frequency questionnaire.

  10. Trajectory-dependent energy loss for swift He atoms axially scattered off a silver surface

    Energy Technology Data Exchange (ETDEWEB)

    Ríos Rubiano, C.A. [Instituto de Astronomía y Física del Espacio (CONICET-UBA), Casilla de correo 67, sucursal 28, 1428 Buenos Aires (Argentina); Bocan, G.A. [Centro Atómico Bariloche, Comisión Nacional de Energía Ató mica, and Consejo Nacional de Investigaciones Científicas y Técnicas, S.C. de Bariloche, Río Negro (Argentina); Juaristi, J.I. [Departamento de Física de Materiales, Facultad de Químicas, UPV/EHU, 20018 San Sebastián (Spain); Donostia International Physics Center (DIPC) and Centro de Física de Materiales CFM/MPC (CSIC-UPV/EHU), 20018 San Sebastián (Spain); Gravielle, M.S., E-mail: msilvia@iafe.uba.ar [Instituto de Astronomía y Física del Espacio (CONICET-UBA), Casilla de correo 67, sucursal 28, 1428 Buenos Aires (Argentina)

    2014-12-01

    Angle- and energy-loss-resolved distributions of helium atoms grazingly scattered from a Ag(110) surface along low indexed crystallographic directions are investigated considering impact energies in the few keV range. Final projectile distributions are evaluated within a semi-classical formalism that includes dissipative effects due to electron–hole excitations through a friction force. For mono-energetic beams impinging along the [11{sup ¯}0],[11{sup ¯}2] and [001] directions, the model predicts the presence of multiple peak structures in energy-loss spectra. Such structures provide detailed information about the trajectory-dependent energy loss. However, when the experimental dispersion of the incident beam is taken into account, these energy-loss peaks are completely washed out, giving rise to a smooth energy-loss distribution, in fairly good agreement with available experimental data.

  11. A parametrisation of the energy loss distributions of charged particles and its applications for silicon detectors

    CERN Document Server

    Sikler, Ferenc

    2012-01-01

    The energy loss distribution of charged particles in silicon is approximated by a simple analytical parametrization. Its use is demonstrated through several examples. With the help of energy deposits in sensing elements of the detector, the position of track segments and the corresponding deposited energy are estimated with improved accuracy and less bias. The parametrization is successfully used to estimate the energy loss rate of charged particles, and it is applied to detector gain calibration tasks.

  12. Energy Losses through Unharnessed Biomass in South- Eastern ...

    African Journals Online (AJOL)

    Nekky Umera

    The South-eastern region of Nigeria is a tropical rain ... Nigeria by The Department of Meteorological Services, World ... natural gas (LNG) used by the population and the average wood .... Adelaide University, Roseworthy Campus, Australia,.

  13. Constraining the density dependence of the symmetry energy using the multiplicity and average $p_T$ ratios of charged pions

    CERN Document Server

    Cozma, M D

    2016-01-01

    The charged pion multiplicity ratio in intermediate energy heavy-ion collisions, a probe of the density dependence of symmetry energy above the saturation point, has been proven in a previous study to be extremely sensitive to the strength of the isovector $\\Delta$(1232) potential in nuclear matter. As there is no current knowledge, either from theory or experiment, about the magnitude of this quantity, the extraction of constraints for the slope of the symmetry energy at saturation by using exclusively the mentioned observable is hindered at present. It is shown that, by including the ratio of average $p_T$ of charged pions $\\langle p_T^{(\\pi^+)}\\rangle/\\langle p_T^{(\\pi^-)}\\rangle$ in the list of fitted observables, the noted problem can be circumvented. A realistic description of this observable requires the accounting for the interaction of pions with the dense nuclear matter environment by the incorporation of the so called S-wave and P-wave pion optical potentials. This is performed within the framework...

  14. Using radiative energy losses to constrain the magnetization and magnetic reconnection rate at the base of black hole jets

    Science.gov (United States)

    Potter, William J.

    2017-02-01

    We calculate the severe radiative energy losses which occur at the base of black hole jets using a relativistic fluid jet model, including in situ acceleration of non-thermal leptons by magnetic reconnection. Our results demonstrate that including a self-consistent treatment of radiative energy losses is necessary to perform accurate magnetohydrodynamic simulations of powerful jets and that jet spectra calculated via post-processing are liable to vastly overestimate the amount of non-thermal emission. If no more than 95 per cent of the initial total jet power is radiated away by the plasma travels as it travels along the length of the jet, we can place a lower bound on the magnetization of the jet plasma at the base of the jet. For typical powerful jets, we find that the plasma at the jet base is required to be highly magnetized, with at least 10 000 times more energy contained in magnetic fields than in non-thermal leptons. Using a simple power-law model of magnetic reconnection, motivated by simulations of collisionless reconnection, we determine the allowed range of the large-scale average reconnection rate along the jet, by restricting the total radiative energy losses incurred and the distance at which the jet first comes into equipartition. We calculate analytic expressions for the cumulative radiative energy losses due to synchrotron and inverse-Compton emission along jets, and derive analytic formulae for the constraint on the initial magnetization.

  15. Comparison of radiative energy loss models in a hot QCD medium

    NARCIS (Netherlands)

    Verweij, M.

    2010-01-01

    The suppression of high $p_{T}$ hadron production in heavy ion collisions is thought to be due to energy loss by gluon radiation off hard partons in a QCD medium. Existing models of QCD radiative energy loss in a color-charged medium give estimates of the coupling strength of the parton to the

  16. REFINED ALGORITHMS OF ELECTRICAL ENERGY LOSSES CALCULATION IN 0,38 KV NETWORKS IN REAL TIME

    Directory of Open Access Journals (Sweden)

    Miroshnyk A.

    2010-08-01

    Full Text Available An approach for closer definition of electrical energy losses size in air lines due to the accounting of environment temperature influence and flowing current size on the wire resistance is offered. Multifunctional microprocessor devices for energy losses calculation are elaborated.

  17. Electron loss from multiply protonated lysozyme ions in high energy collisions with molecular oxygen

    DEFF Research Database (Denmark)

    Hvelplund, P; Nielsen, SB; Sørensen, M

    2001-01-01

    We report on the electron loss from multiply protonated lysozyme ions Lys-Hn(n)+ (n = 7 - 17) and the concomitant formation of Lys-Hn(n+1)+. in high-energy collisions with molecular oxygen (laboratory kinetic energy = 50 x n keV). The cross section for electron loss increases with the charge stat...

  18. Comparison of radiative energy loss models in a hot QCD medium

    NARCIS (Netherlands)

    Verweij, M.

    2010-01-01

    The suppression of high $p_{T}$ hadron production in heavy ion collisions is thought to be due to energy loss by gluon radiation off hard partons in a QCD medium. Existing models of QCD radiative energy loss in a color-charged medium give estimates of the coupling strength of the parton to the mediu

  19. Energy loss of a heavy particle near 3D charged rotating hairy black hole

    Energy Technology Data Exchange (ETDEWEB)

    Naji, Jalil [Ilam University, Physics Department, P.O.Box 69315-516, Ilam (Iran, Islamic Republic of)

    2014-01-15

    In this paper we consider a charged rotating black hole in three dimensions with a scalar charge and discuss the energy loss of a heavy particle moving near the black-hole horizon. We also study quasi-normal modes and find the dispersion relations. We find that the effect of scalar charge and electric charge increases the energy loss. (orig.)

  20. Energy loss of a heavy particle near 3D charged rotating hairy black hole

    Science.gov (United States)

    Naji, Jalil

    2014-01-01

    In this paper we consider a charged rotating black hole in three dimensions with a scalar charge and discuss the energy loss of a heavy particle moving near the black-hole horizon. We also study quasi-normal modes and find the dispersion relations. We find that the effect of scalar charge and electric charge increases the energy loss.

  1. Evaluation of economic loss from energy-related environmental pollution: a case study of Beijing

    Science.gov (United States)

    Chen, Chen; Su, Meirong; Liu, Gengyuan; Yang, Zhifeng

    2013-09-01

    With the growth of energy consumption, energy-related environmental pollution has become increasingly serious, which in turn causes enormous economic loss because of public health damage, corrosion of materials, crop yield reduction, and other factors. Evaluating economic loss caused by energy-related environmental pollution can contribute to decision making in energy management. A framework for evaluating economic loss from environmental pollution produced during energy production, transportation, and consumption is proposed in this paper. Regarding SO2, PM10, and solid waste as the main pollutants, economic losses from health damage, materials corrosion, crop yield reduction, and solid waste pollution are estimated based on multiple concentration-response relationships and dose-response functions. The proposed framework and evaluation methods are applied to Beijing, China. It is evident that total economic loss attributable to energy-related environmental pollution fluctuated during 2000-2011 but had a general growth trend, with the highest value reaching 2.3 × 108 CNY (China Yuan) in 2006. Economic loss caused by health damage contributes most to the total loss among the four measured damage types. The total economic loss strongly correlates with the amount of energy consumption, especially for oil and electricity. Our evaluation framework and methods can be used widely to measure the potential impact of environmental pollution in the energy lifecycle.

  2. Electromagnetic therapeutic coils design to reduce energy loss

    Directory of Open Access Journals (Sweden)

    Syrek Przemyslaw

    2016-01-01

    Full Text Available The article introduces the problem of power loss reduction in applicators used in magnetotherapy. To generate magnetic field whose distribution is optimal and to reduce the power loss, the authors establish a set of parameters to evaluate the model of device. Results make it possible to infer that the real power input necessary to operate the magnetic field generator properly may vary significantly depending on construction and localization. The issues raised in this paper should be treated as a basis for further discussion on the construction of applicators used, e.g., in Transcranial Magnetic Stimulation.

  3. Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue

    Directory of Open Access Journals (Sweden)

    Filippo Berto

    2016-10-01

    Full Text Available The torsional fatigue behaviour of circumferentially notched specimens made of austenitic stainless steel, SUS316L, and carbon steel, SGV410, characterized by different notch root radii has been recently investigated by Tanaka. In that contribution, it was observed that the total fatigue life of the austenitic stainless steel increases with increasing stress concentration factor for a given applied nominal shear stress amplitude. By using the electrical potential drop method, Tanaka observed that the crack nucleation life was reduced with increasing stress concentration, on the other hand the crack propagation life increased. The experimental fatigue results, originally expressed in terms of nominal shear stress amplitude, have been reanalysed by means of the local strain energy density (SED averaged over a control volume having radius R0 surrounding the notch tip. To exclude all extrinsic effects acting during the fatigue crack propagation phase, such as sliding contact and/or friction between fracture surfaces, crack initiation life has been considered in the present work. In the original paper, initiation life was defined in correspondence of a 0.1÷0.4-mm-deep crack. The control radius R0 for fatigue strength assessment of notched components, thought of as a material property, has been estimated by imposing the constancy of the averaged SED for both smooth and cracked specimens at NA = 2 million loading cycles

  4. Heat Loss of the Earth and Energy Budget of the Mantle

    Science.gov (United States)

    Mareschal, J.; Jaupart, C.

    2009-05-01

    Determination of the rate of Earth's energy loss is based a very large number of heat flux measurements in a variety of geological settings. Difficulties in integrating the flux over the Earth surface stem from two facts. One is that heat flux varies on a wide range of spatial scales and, in continents, is not a function of a single variable such as geological age, for example. The other difficulty is that the data exhibit large scatter. Advances in the interpretation of oceanic heat flux data are due to a thorough understanding of hydrothermal circulation through oceanic crust and sediments. In continents, the total heat loss has been constrained by sampling of old cratons is now adequate and systematic studies of heat flux and heat production have provided robust constraints on the crustal contribution to the surface heat flux. Heat loss through the ocean floor cannot be determined from the raw data because they are affected by hydrothermal circulation and irregularities in sediment cover. Predictions of the "half-space" model for the conductive cooling of oceanic lithosphere are consistent with heat flux measurements in selected "noise-free" environments as well as with the bathymetry of the sea floor. They are also consistent with values of the mantle temperature beneath oceanic ridges derived from petrology. This cooling model is also consistent with numerical calculations of mantle convection with plates. Using an accurate determination of the area extent of oceanic sea floor including marginal basins and accounting for enhanced heat flux over hot spots, we estimated the rate of heat loss through the oceans to be 32±2 TW (1012 Watts). This result is valid only for the present-day age distribution of sea floor and heat loss may have been different in the past when the distribution of sea floor ages was different from the present. For continents, bias due to the very uneven sampling of the surface heat flux is removed by area- weighting the average. The

  5. Energy loss in unstable QGP - problem of the upper cut-off

    Directory of Open Access Journals (Sweden)

    Carrington Margaret E.

    2014-04-01

    Full Text Available The energy loss of a highly energetic parton in a weakly coupled quark-gluon plasma is studied as an initial value problem. An extremely prolate plasma, where the momentum distribution is infinitely elongated along one direction, is considered. The energy loss is strongly time and direction dependent and its magnitude can much exceed the equilibrium value. It is logarithmically ultraviolet divergent. We argue that a good approximation to the energy loss can be obtained if this divergence is cut off with the parton energy.

  6. Many-body Systems Interacting via a Two-body Random Ensemble average energy of each angular momentum

    CERN Document Server

    Zhao, Y M; Yoshinaga, N

    2002-01-01

    In this paper, we discuss the regularities of energy of each angular momentum $I$ averaged over all the states for a fixed angular momentum (denoted as $\\bar{E}_I$'s) in many-body systems interacting via a two-body random ensemble. It is found that $\\bar{E}_I$'s with $I \\sim I_{min}$ (minimum of $I$) or $I_{max}$ have large probabilities (denoted as ${\\cal P}(I)$) to be the lowest, and that ${\\cal P}(I)$ is close to zero elsewhere. A simple argument based on the randomness of the two-particle cfp's is given. A compact trajectory of the energy $\\bar{E}_I$ vs. $I(I+1)$ is found to be robust. Regular fluctuations of the $P(I)$ (the probability of finding $I$ to be the ground state) and ${\\cal P}(I)$ of even fermions in a single-$j$ shell and boson systems are found to be reverse, and argued by the dimension fluctuation of the model space. Other regularities, such as why there are 2 or 3 sizable ${\\cal P}(I)$'s with $I\\sim I_{min}$ and ${\\cal P}(I) \\ll {\\cal P}(I_{max})$'s with $I\\sim I_{max}$, why the coefficien...

  7. Analysis of high-frequency energy in long-term average spectra of singing, speech, and voiceless fricatives.

    Science.gov (United States)

    Monson, Brian B; Lotto, Andrew J; Story, Brad H

    2012-09-01

    The human singing and speech spectrum includes energy above 5 kHz. To begin an in-depth exploration of this high-frequency energy (HFE), a database of anechoic high-fidelity recordings of singers and talkers was created and analyzed. Third-octave band analysis from the long-term average spectra showed that production level (soft vs normal vs loud), production mode (singing vs speech), and phoneme (for voiceless fricatives) all significantly affected HFE characteristics. Specifically, increased production level caused an increase in absolute HFE level, but a decrease in relative HFE level. Singing exhibited higher levels of HFE than speech in the soft and normal conditions, but not in the loud condition. Third-octave band levels distinguished phoneme class of voiceless fricatives. Female HFE levels were significantly greater than male levels only above 11 kHz. This information is pertinent to various areas of acoustics, including vocal tract modeling, voice synthesis, augmentative hearing technology (hearing aids and cochlear implants), and training/therapy for singing and speech.

  8. Channeling energy loss and dechanneling of He along axial and planar directions of Si

    Science.gov (United States)

    Shafiei, S.; Lamehi-Rachti, M.

    2016-01-01

    In the present work, the energy loss and the dechanneling of He ions in the energy of 1.5 MeV and 2 MeV along the and axial directions as well as the {1 0 0} and {1 1 0} planar directions of Si were studied by the simulation of the channeling Rutherford backscattering spectra. The simulation was done based on the considerations that a fraction of the aligned beam enters the sample as a random component due to the ions scattering from the surface, and the dechanneling starts at the greater penetration depths, xDech. It was presumed that the dechanneling process follows a simple exponential law with a parameter λ which is proportional to the half-thickness. The Levenberg-Marquardt algorithm was used to set the best parameters of energy loss ratio, xDech and λ. The experimental results are well reproduced by this simulation. Differences between various axial and planar channels in the Si crystal and their influence on the energy loss ratio and dechanneling of He ions are described. Moreover, the energy dependence of energy loss ratio and dechanneling of He ions were investigated. It is shown that the dechanneling behavior of ions depends on the energy and energy loss of the ions along a channel. The channeled to random energy loss increases by decreasing ions energy.

  9. The optimum grain size for minimizing energy losses in iron

    Energy Technology Data Exchange (ETDEWEB)

    Campos, M.F. de [Escola de Engenharia Industrial Metalurgica de Volta Redonda/Universidade Federal Fluminense Av. dos Trabalhadores 420, Vila Santa Cecilia, 27255-125, Volta Redonda, RJ (Brazil)]. E-mail: mcampos@metal.eeimvr.uff.br; Teixeira, J.C. [Instituto de Pesquisas Tecnologicas do Estado de Sao Paulo, Av. Prof. Almeida Prado 532, 05508-901, Sao Paulo, SP (Brazil); Landgraf, F.J.G. [Instituto de Pesquisas Tecnologicas do Estado de Sao Paulo, Av. Prof. Almeida Prado 532, 05508-901, Sao Paulo, SP (Brazil)]. E-mail: landgraf@ipt.br

    2006-06-15

    A model able to predict the optimum grain size for textured electrical steels used in motors or transformers is presented. The model is based on the Pry and Bean model for the anomalous losses. The validity of the model is restricted to the frequency range of 1-1000 Hz. The model predicts that the optimum grain size decreases as: resistivity decreases or frequency increases or thickness of steel sheet increases. The predictions of the model are compared with experimental results.

  10. State Averages

    Data.gov (United States)

    U.S. Department of Health & Human Services — A list of a variety of averages for each state or territory as well as the national average, including each quality measure, staffing, fine amount and number of...

  11. Effects of rapid weight loss and regain on body composition and energy expenditure.

    Science.gov (United States)

    Sagayama, Hiroyuki; Yoshimura, Eiichi; Yamada, Yosuke; Ichikawa, Mamiko; Ebine, Naoyuki; Higaki, Yasuki; Kiyonaga, Akira; Tanaka, Hiroaki

    2014-01-01

    Weight-classified athletes need an energy intake plan to accomplish target weight reduction. They have to consider body composition and energy metabolism during rapid weight loss followed by rapid weight regain to achieve their energy intake plan. We investigated the effects of rapid weight loss, followed by weight regain, on body composition and energy expenditure. Ten weight-classified athletes were instructed to reduce their body weight by 5% in 7 days. Following the weight loss, they were asked to try to regain all of their lost weight with an ad libitum diet for 12 h. Food intake was recorded during the baseline, weight loss, and regain periods. Fat mass, total body water, and fat-free dry solids were estimated by underwater weighing and stable isotope dilution methods. A three-component model was calculated using Siri's equation. Basal and sleeping metabolic rates were measured by indirect calorimetry. Body composition and energy expenditure were measured before and after weight loss and after weight regain. Body weight, total body water, and fat-free dry solids were decreased after the weight loss period but recovered after weight regain (p weight loss but recovered after weight regain. Changes in total body water greatly affect body weight during rapid weight loss and regain. In addition, rapid weight loss and regain did not greatly affect the basal metabolic rate in weight-classified athletes.

  12. Infrared thermography applied to the evaluation of metabolic heat loss of chicks fed with different energy densities

    Directory of Open Access Journals (Sweden)

    VMOS Ferreira

    2011-06-01

    Full Text Available Brazil must comply with international quality standards and animal welfare requirements in order to maintain its position as world's largest exporter of poultry meat. With the scenario of global climate change there is the forecast of occurrence of extreme events with characteristics of both excess cold and heat for several regions of the country. This study aimed to evaluate the effectiveness of using images of infrared thermography to evaluate the loss of sensible heat in young broilers fed different dietary energy levels. Twenty birds were reared in a house with appropriate brooding using infrared lamps. Birds were distributed in a completely randomized experimental into two treatments: T1 (control diet with 2950 kcal ME/kg-1, and T2 (high-energy diet with 3950 kcal ME/kg-1. Infrared thermographic images of the birds were recorded for four consecutive days. One bird was randomly chosen per treatment, and had special images taken and analyzed. Average surface temperature of the body area was calculated using the surface temperature recorded at 100 spots (50 at the front and 50 at the lateral side of the bird's body. Mean surface temperature of the flock was calculated recording 100 spots on the group of birds. Total radiant heat loss was calculated based on the average data of surface temperature. The results indicated that the young broilers fed the high-energy diet presented a metabolic energy loss equivalent to 0.64 kcal h-1, while the birds fed with the control diet lost 2.18 kcal h-1. This finding confirms that oil supplementation to the diet reduces bird heat loss. The infrared camera was able to record young broilers' surface temperature variation when birds were fed diets with different energy contents.

  13. Determining the band gap and mean kinetic energy of atoms from reflection electron energy loss spectra

    Energy Technology Data Exchange (ETDEWEB)

    Vos, M. [Atomic and Molecular Physics Laboratories, Research School of Physics and Engineering, Australian National University, Canberra ACT (Australia); Marmitt, G. G. [Atomic and Molecular Physics Laboratories, Research School of Physics and Engineering, Australian National University, Canberra ACT (Australia); Instituto de Fisica da Universidade Federal do Rio Grande do Sul, Avenida Bento Goncalves 9500, 91501-970 Porto Alegre, RS (Brazil); Finkelstein, Y. [Nuclear Research Center — Negev, Beer-Sheva 84190 (Israel); Moreh, R. [Physics Department, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel)

    2015-09-14

    Reflection electron energy loss spectra from some insulating materials (CaCO{sub 3}, Li{sub 2}CO{sub 3}, and SiO{sub 2}) taken at relatively high incoming electron energies (5–40 keV) are analyzed. Here, one is bulk sensitive and a well-defined onset of inelastic excitations is observed from which one can infer the value of the band gap. An estimate of the band gap was obtained by fitting the spectra with a procedure that includes the recoil shift and recoil broadening affecting these measurements. The width of the elastic peak is directly connected to the mean kinetic energy of the atom in the material (Doppler broadening). The experimentally obtained mean kinetic energies of the O, C, Li, Ca, and Si atoms are compared with the calculated ones, and good agreement is found, especially if the effect of multiple scattering is taken into account. It is demonstrated experimentally that the onset of the inelastic excitation is also affected by Doppler broadening. Aided by this understanding, we can obtain a good fit of the elastic peak and the onset of inelastic excitations. For SiO{sub 2}, good agreement is obtained with the well-established value of the band gap (8.9 eV) only if it is assumed that the intensity near the edge scales as (E − E{sub gap}){sup 1.5}. For CaCO{sub 3}, the band gap obtained here (7 eV) is about 1 eV larger than the previous experimental value, whereas the value for Li{sub 2}CO{sub 3} (7.5 eV) is the first experimental estimate.

  14. Energy loss of ions in a magnetized plasma: conformity between linear response and binary collision treatments.

    Science.gov (United States)

    Nersisyan, H B; Zwicknagel, G; Toepffer, C

    2003-02-01

    The energy loss of a heavy ion moving in a magnetized electron plasma is considered within the linear response (LR) and binary collision (BC) treatments with the purpose to look for a connection between these two models. These two complementary approaches yield close results if no magnetic field is present, but there develop discrepancies with growing magnetic field at ion velocities that are lower than, or comparable with, the thermal velocity of the electrons. We show that this is a peculiarity of the Coulomb interaction which requires cutoff procedures to account for its singularity at the origin and its infinite range. The cutoff procedures in the LR and BC treatments are different as the order of integrations in velocity and in ordinary (Fourier) spaces is reversed in both treatments. While BC involves a velocity average of Coulomb logarithms, there appear in LR Coulomb logarithms of velocity averaged cutoffs. The discrepancies between LR and BC vanish, except for small contributions of collective modes, for smoothened potentials that require no cutoffs. This is shown explicitly with the help of an improved BC in which the velocity transfer is treated up to second order in the interaction in Fourier space.

  15. Addressing student models of energy loss in quantum tunnelling

    CERN Document Server

    Wittmann, M C; Bao, L; Wittmann, Micael C.; Morgan, Jeffrey T.; Bao, Lei

    2005-01-01

    We report on a multi-year, multi-institution study to investigate student reasoning about energy in the context of quantum tunnelling. We use ungraded surveys, graded examination questions, individual clinical interviews, and multiple-choice exams to build a picture of the types of responses that students typically give. We find that two descriptions of tunnelling through a square barrier are particularly common. Students often state that tunnelling particles lose energy while tunnelling. When sketching wave functions, students also show a shift in the axis of oscillation, as if the height of the axis of oscillation indicated the energy of the particle. We find inconsistencies between students' conceptual, mathematical, and graphical models of quantum tunnelling. As part of a curriculum in quantum physics, we have developed instructional materials to help students develop a more robust and less inconsistent picture of tunnelling, and present data suggesting that we have succeeded in doing so.

  16. Energy losses in the Polish power system and possibilities of reducing them

    Energy Technology Data Exchange (ETDEWEB)

    Buchta, F.; Janiczek, R.; Sobieszczanski, S. [Politechnika Slaska, Katowice (Poland). PSE SA

    1993-11-01

    Analyzes energy losses in power generation and power distribution systems in Poland. The following aspects of power losses in power generation are evaluated: structure of existing power plants in Poland, types of equipment used in coal-fired power plants, efficiency of condensation units (about 36.0% or 11.6-10 MJ/kWxh), efficiency of planned modernization of existing power units, effects of flue gas desulfurization on efficiency of power generation in coal-fired power plants, energy policy of Poland, investment in coal-fired power plants, feasibility of clean coal programs, effects of replacing conventional coal combustion by combined-cycle power plants with coal gasification on energy efficiency and energy losses, energy losses during power transmission and distribution. 19 refs.

  17. The average local ionization energy as a tool for identifying reactive sites on defect-containing model graphene systems.

    Science.gov (United States)

    Murray, Jane S; Shields, Zenaida Peralta-Inga; Lane, Pat; Macaveiu, Laura; Bulat, Felipe A

    2013-07-01

    In a continuing effort to further explore the use of the average local ionization energy [Formula: see text] as a computational tool, we have investigated how well [Formula: see text] computed on molecular surfaces serves as a predictive tool for identifying the sites of the more reactive electrons in several nonplanar defect-containing model graphene systems, each containing one or more pentagons. They include corannulene (C20H10), two inverse Stone-Thrower-Wales defect-containing structures C26H12 and C42H16, and a nanotube cap model C22H6, whose end is formed by three fused pentagons. Coronene (C24H12) has been included as a reference planar defect-free graphene model. We have optimized the structures of these systems as well as several monohydrogenated derivatives at the B3PW91/6-31G* level, and have computed their I(r) on molecular surfaces corresponding to the 0.001 au, 0.003 au and 0.005 au contours of the electronic density. We find that (1) the convex sides of the interior carbons of the nonplanar models are more reactive than the concave sides, and (2) the magnitudes of the lowest I(r) surface minima (the I S, min) correlate well with the interaction energies for hydrogenation at these sites. These I S, min values decrease in magnitude as the nonplanarity of the site increases, consistent with earlier studies. A practical benefit of the use of I(r) is that a single calculation suffices to characterize the numerous sites on a large molecular system, such as graphene and defect-containing graphene models.

  18. Neutrino energy loss by electron capture in magnetic field at the crusts of neutron stars

    Institute of Scientific and Technical Information of China (English)

    LIU Jing-Jing; LUO Zhi-Quan

    2008-01-01

    Based on the p-f shell model,the effect of strong magnetic field on neutrino energy loss rates by electron capture is investigated.The calculations show that the magnetic field has only a slight effect on the neutrino energy loss rates in the range of 108-1013 G on the surfaces of most neutron stars.But for some magnetars,the range of the magnetic field is 1013-1018 G,and the neutrino energy loss rates are greatly reduced,even by more than four orders of magnitude due to the strong magnetic field.

  19. Partonic energy loss in ultrarelativistic heavy ion collisions jet suppression versus jet fragmentation softening

    CERN Document Server

    Lokhtin, Igor P

    2003-01-01

    We discuss the modification of a jet fragmentation function due to medium-induced partonic energy loss in context of leading particle observables in ultrarelativistic nucleus-nucleus interactions. We also analyze the relation between in-medium softening jet fragmentation function and suppression of the jet rates due to energy loss outside the jet cone. The predicted anti-correlation between two effects allows to probe a fraction of partonic energy loss carried out of the jet cone and truly lost to the jet.

  20. Energy loss and longitudinal wakefield of relativistic short proton bunches in electron clouds

    Directory of Open Access Journals (Sweden)

    O. Boine-Frankenheim

    2012-05-01

    Full Text Available The aim of our study is the numerical computation of the wakefield and energy loss per unit length for relativistic, short (<10  ns proton bunches interacting with an electron cloud inside the beam pipe. We present analytical expressions for the energy loss in the impulse kick approximation. For the simulation of the wakefields a 2D self-consistent, electrostatic particle-in-cell (PIC code is employed. Results for the energy loss and for the wakefields are presented for the parameter scope of the CERN LHC and SPS. For selected parameters the results are compared to a three-dimensional (3D electromagnetic PIC code.

  1. Average exceptional Lie and Coxeter group hierarchies with special reference to the standard model of high energy particle physics

    Energy Technology Data Exchange (ETDEWEB)

    El Naschie, M.S. [King Abdullah Al Saud Institute of Nano and Advanced Technologies, Riyadh (Saudi Arabia)], E-mail: Chaossf@aol.com

    2008-08-15

    The notions of the order of a symmetry group may be extended to that of an average, non-integer order. Building on this extension, it can be shown that the five classical exceptional Lie symmetry groups could be extended to a hierarchy, the total sum of which is four times {alpha}-bar{sub 0}=137+k{sub 0} of the electromagnetic field. Subsequently it can be shown that all known and conjectured physical fields may be derived by E-infinity transfinite scaling transformation. Consequently E{sub 8}E{sub 8} exceptional Lie symmetry groups manifold, the SL(2,7){sub c} holographic modular curve boundary {gamma}(7), Einstein-Kaluza gravity R{sup (n=4)} and R{sup (n=5)} as well as the electromagnetic field are all topological transformations of each other. It is largely a matter of mathematical taste to choose E{sub 8} or the electromagnetic field associated with {alpha}-bar{sub 0} as derived or as fundamental. However since E{sub 8} has been extensively studied by the founding father of group theory and has recently been mapped completely, it seems beneficial to discuss at least high energy physics starting from the largest of the exceptional groups.

  2. Measurement of Quark Energy Loss in Cold Nuclear Matter at Fermilab E906/SeaQuest

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Po-Ju [Colorado U.

    2017-01-01

    Parton energy loss is a process within QCD that draws considerable interest. The measurement of parton energy loss can provide valuable information for other hard-scattering processes in nuclei, and also serves as an important tool for exploring the properties of the quark-gluon plasma (QGP). Quantifying the energy loss in cold nuclear matter will help to set a baseline relative to energy loss in the QGP. With the Drell-Yan process, the energy loss of incoming quarks in cold nuclear matter can be ideally investigated since the final state interaction is expected to be minimal. E906/SeaQuest is a fixed-target experiment using the 120 GeV proton beam from the Fermilab Main Injector and has been collecting data from p+p, p+d, p+C, p+Fe, and p+W collisions. Within the E906 kinematic coverage of Drell-Yan production via the dimuon channel, the quark energy loss can be measured in a regime where other nuclear effects are expected to be small. In this thesis, the study of quark ener gy loss from different cold nuclear targets is presented.

  3. Limits for Recombination in a Low Energy Loss Organic Heterojunction

    KAUST Repository

    Menke, S. Matthew

    2016-11-03

    Donor-acceptor organic solar cells often show high quantum yields for charge collection, but relatively low open-circuit voltages (VOC) limit power conversion efficiencies to around 12%. We report here the behavior of a system, PIPCP:PC61BM, that exhibits very low electronic disorder (Urbach energy less than 27 meV), very high carrier mobilities in the blend (field-effect mobility for holes >10-2 cm2 V-1 s-1), and a very low driving energy for initial charge separation (50 meV). These characteristics should give excellent performance, and indeed, the VOC is high relative to the donor energy gap. However, we find the overall performance is limited by recombination, with formation of lower-lying triplet excitons on the donor accounting for 90% of the recombination. We find this is a bimolecular process that happens on time scales as short as 100 ps. Thus, although the absence of disorder and the associated high carrier mobility speeds up charge diffusion and extraction at the electrodes, which we measure as early as 1 ns, this also speeds up the recombination channel, giving overall a modest quantum yield of around 60%. We discuss strategies to remove the triplet exciton recombination channel.

  4. [ital Q][sup 2] dependence of the average squared transverse energy of jets in deep-inelastic muon-nucleon scattering with comparison to perturbative QCD predictions

    Energy Technology Data Exchange (ETDEWEB)

    Adams, M.R.; Arndotied, S.; Anthony, P.L.; Baker, M.D.; Bartlett, J.; Bhatti, A.A.; Braun, H.M.; Busza, W.; Conrad, J.M.; Coutrakon, G.; Davisson, R.; Derado, I.; Dhawan, S.K.; Dougherty, W.; Dreyer, T.; Dziunikowska, K.; Eckardt, V.; Ecker, U.; Erdmann, M.; Eskreys, A.; Figiel, J.; Gebauer, H.J.; Geesaman, D.F.; Gilman, R.; Green, M.C.; Haas, J.; Halliwell, C.; Hanlon, J.; Hantke, D.; Hughes, V.W.; Jackson, H.E.; Jaffe, D.E.; Jancso, G.; Jansen, D.M.; Kaufman, S.; Kennedy, R.D.; Kirk, T.; Kobrak, H.G.E.; Krzywdzinski, S.; Kunori, S.; Lord, J.J.; Lubatti, H.J.; McLeod, D.; Magill, S.; Malecki, P.; Manz, A.; Melanson, H.; Michael, D.G.; Mohr, W.; Montgomery, H.E.; Morfin, J.G.; Nickerson, R.B.; O' Day, S.; Olkiewicz, K.; Osborne, L.; Papavassiliou, V.; Pawlik, B.; Pipkin, F.M.; Ramberg, E.J.; Roeser, A.; Ryan, J.J.; Salgado, C.W.; Salvarani, A.; Schellman, H.; Schmitt, M.; Schmitz, N.; Schueler, K.P.; Skuja, A.; Snow, G.A.; Soeldner-Rembold, S.; Steinberg, P.H.; Stier, H.E.; Stopa, P.; S; (E665 Collaboration)

    1994-01-24

    The average squared transverse energy of jets in deep-inelastic muon-nucleon scattering is measured as a function of the momentum transfer squared ([ital Q][sup 2]), in the range 3[lt][ital Q][sup 2][lt]25 GeV[sup 2]. Perturbative QCD predicts that the average squared parton transverse energy will depend upon the strong coupling constant ([alpha][sub [ital S

  5. Generalization of radiative jet energy loss to non-zero magnetic mass

    CERN Document Server

    Djordjevic, Magdalena

    2011-01-01

    Reliable predictions for jet quenching in ultra-relativistic heavy ion collisions require accurate computation of radiative energy loss. With this goal, an energy loss formalism in a realistic finite size dynamical QCD medium was recently developed. While this formalism assumes zero magnetic mass - in accordance with the one-loop perturbative calculations - different non-perturbative approaches report a non-zero magnetic mass at RHIC and LHC. We here generalize the energy loss to consistently include a possibility for existence of non-zero magnetic screening. We also present how the inclusion of finite magnetic mass changes the energy loss results. Our analysis indicates a fundamental constraint on magnetic to electric mass ratio.

  6. Energy Loss of a Heavy Fermion in an Anisotropic QED Plasma

    CERN Document Server

    Romatschke, P; Romatschke, Paul; Strickland, Michael

    2004-01-01

    We compute the leading-order collisional energy loss of a heavy fermion propagating in a QED plasma with an electron distribution function which is anisotropic in momentum space. We show that in the presence of such anisotropies there can be a significant directional dependence of the heavy fermion energy loss with the effect being quite large for highly-relativistic velocities. We also repeat the analysis of the isotropic case more carefully and show that the final result depends on the intermediate scale used to separate hard and soft contributions to the energy loss. We then show that the canonical isotropic result is obtained in the weak-coupling limit. For intermediate-coupling we use the residual scale dependence as a measure of our theoretical uncertainty. We also discuss complications which could arise due to the presence of unstable soft photonic modes and demonstrate that the calculation of the energy loss is safe.

  7. Stellar energy loss rates in the pair-annihilation process beyond the standard model

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Ruiz, M.A. [Universidad Autonoma de Zacatecas, Unidad Academica de Ciencias Quimicas, Apartado Postal C-585, Zacatecas (Mexico); Gutierrez-Rodriguez, A. [Universidad Autonoma de Zacatecas, Facultad de Fisica, Apartado Postal C-580, Zacatecas (Mexico); Gonzalez-Sanchez, A. [Universidad Autonoma de Zacatecas, Facultad de Fisica, Apartado Postal C-580, Zacatecas (Mexico); PSL Research University, Observatoire de Paris, LERMA, CNRS UMR 8112, Paris (France)

    2017-01-15

    We calculate the stellar energy loss due to neutrino-pair production in e{sup +}e{sup -} annihilation in the context of a 331 model, a left-right symmetric model and a simplest little Higgs model in a way that can be used in supernova calculations. We also present some simple estimates which show that such process can act as an efficient energy loss mechanism in the shocked supernova core. We find that the stellar energy loss is almost independent of the parameters of the models in the allowed range for these parameters. This work complements other studies on the stellar energy loss rate in e{sup +}e{sup -} annihilation. (orig.)

  8. TFAP2B influences the effect of dietary fat on weight loss under energy restriction

    DEFF Research Database (Denmark)

    Stocks, Tanja; Angquist, Lars; Banasik, Karina;

    2012-01-01

    Numerous gene loci are related to single measures of body weight and shape. We investigated if 55 SNPs previously associated with BMI or waist measures, modify the effects of fat intake on weight loss and waist reduction under energy restriction....

  9. Estimation of Power/Energy Losses in Electric Distribution Systems based on an Efficient Method

    Directory of Open Access Journals (Sweden)

    Gheorghe Grigoras

    2013-09-01

    Full Text Available Estimation of the power/energy losses constitutes an important tool for an efficient planning and operation of electric distribution systems, especially in a free energy market environment. For further development of plans of energy loss reduction and for determination of the implementation priorities of different measures and investment projects, analysis of the nature and reasons of losses in the system and in its different parts is needed. In the paper, an efficient method concerning the power flow problem of medium voltage distribution networks, under condition of lack of information about the nodal loads, is presented. Using this method it can obtain the power/energy losses in power transformers and the lines. The test results, obtained for a 20 kV real distribution network from Romania, confirmed the validity of the proposed method.  

  10. Energy loss of keV He2+ scattered off an Al(110) surface

    NARCIS (Netherlands)

    Limburg, J; Schlatholter, T; Hoekstra, R; Morgenstern, R; Hausmann, S; Heiland, W; Narmann, A

    1998-01-01

    This paper presents results of measurements of energy loss suffered by He-projectiles scattered off an Al surface. The measured loss distributions are modeled in terms of the (classical) friction experienced by the projectiles due to their interaction with the electron gas at the Al surface. Simulat

  11. Energy balance and the composition of weight loss during prolonged space flight

    Science.gov (United States)

    Leonard, J. I.

    1982-01-01

    Integrated metabolic balance analysis, Skylab integrated metabolic balance analysis and computer simulation of fluid-electrolyte responses to zero-g, overall mission weight and tissue losses, energy balance, diet and exercise, continuous changes, electrolyte losses, caloric and exercise requirements, and body composition are discussed.

  12. Incorporation of Finite Element Analysis into Annual Energy Loss Estimation for Permanent Magnet Wind Turbine Generators

    DEFF Research Database (Denmark)

    Henriksen, Matthew Lee; Jensen, Bogi Bech

    2013-01-01

    Several methods of estimating the annual energy losses for wind turbine generators are investigated in this paper. Utilizing a high amount of transient simulations with motion is first demonstrated. Usage of a space-time transformation for prediction of iron losses is also explored. The methods, ...

  13. Optimization of Monochromated TEM for Ultimate Resolution Imaging and Ultrahigh Resolution Electron Energy Loss Spectroscopy

    KAUST Repository

    Lopatin, Sergei

    2017-09-01

    The performance of a monochromated transmission electron microscope with Wien type monochromator is optimized to achieve an extremely narrow energy spread of electron beam and an ultrahigh energy resolution with spectroscopy. The energy spread in the beam is improved by almost an order of magnitude as compared to specified values. The optimization involves both the monochromator and the electron energy loss detection system. We demonstrate boosted capability of optimized systems with respect to ultra-low loss EELS and sub-angstrom resolution imaging (in a combination with spherical aberration correction).

  14. The calculation of mechanical energy loss for incompressible steady pipe flow of homogeneous fluid

    Institute of Scientific and Technical Information of China (English)

    刘士和; 薛娇; 范敏

    2013-01-01

    The calculation of the mechanical energy loss is one of the fundamental problems in the field of Hydraulics and Enginee- ring Fluid Mechanics. However, for a non-uniform flow the relation between the mechanical energy loss in a volume of fluid and the kinematical and dynamical characteristics of the flow field is not clearly established. In this paper a new mechanical energy equation for the incompressible steady non-uniform pipe flow of homogeneous fluid is derived, which includes the variation of the mean tur- bulent kinetic energy, and the formula for the calculation of the mechanical energy transformation loss for the non-uniform flow bet- ween two cross sections is obtained based on this equation. This formula can be simplified to the Darcy-Weisbach formula for the uniform flow as widely used in Hydraulics. Furthermore, the contributions of the mechanical energy loss relative to the time avera- ged velocity gradient and the dissipation of the turbulent kinetic energy in the turbulent uniform pipe flow are discussed, and the con- tributions of the mechanical energy loss in the viscous sublayer, the buffer layer and the region above the buffer layer for the turbu- lent uniform flow are also analyzed.

  15. Energy loss of ions by electric-field fluctuations in a magnetized plasma.

    Science.gov (United States)

    Nersisyan, Hrachya B; Deutsch, Claude

    2011-06-01

    The results of a theoretical investigation of the energy loss of charged particles in a magnetized classical plasma due to the electric-field fluctuations are reported. The energy loss for a test particle is calculated through the linear-response theory. At vanishing magnetic field, the electric-field fluctuations lead to an energy gain of the charged particle for all velocities. It has been shown that in the presence of strong magnetic field, this effect occurs only at low velocities. In the case of high velocities, the test particle systematically loses its energy due to the interaction with a stochastic electric field. The net effect of the fluctuations is the systematic reduction of the total energy loss (i.e., the sum of the polarization and stochastic energy losses) at vanishing magnetic field and reduction or enhancement at strong field, depending on the velocity of the particle. It is found that the energy loss of the slow heavy ion contains an anomalous term that depends logarithmically on the projectile mass. The physical origin of this anomalous term is the coupling between the cyclotron motion of the plasma electrons and the long-wavelength, low-frequency fluctuations produced by the projectile ion. This effect may strongly enhance the stochastic energy gain of the particle.

  16. Toward 10 meV electron energy-loss spectroscopy resolution for plasmonics.

    Science.gov (United States)

    Bellido, Edson P; Rossouw, David; Botton, Gianluigi A

    2014-06-01

    Energy resolution is one of the most important parameters in electron energy-loss spectroscopy. This is especially true for measurement of surface plasmon resonances, where high-energy resolution is crucial for resolving individual resonance peaks, in particular close to the zero-loss peak. In this work, we improve the energy resolution of electron energy-loss spectra of surface plasmon resonances, acquired with a monochromated beam in a scanning transmission electron microscope, by the use of the Richardson-Lucy deconvolution algorithm. We test the performance of the algorithm in a simulated spectrum and then apply it to experimental energy-loss spectra of a lithographically patterned silver nanorod. By reduction of the point spread function of the spectrum, we are able to identify low-energy surface plasmon peaks in spectra, more localized features, and higher contrast in surface plasmon energy-filtered maps. Thanks to the combination of a monochromated beam and the Richardson-Lucy algorithm, we improve the effective resolution down to 30 meV, and evidence of success up to 10 meV resolution for losses below 1 eV. We also propose, implement, and test two methods to limit the number of iterations in the algorithm. The first method is based on noise measurement and analysis, while in the second we monitor the change of slope in the deconvolved spectrum.

  17. Interdependence of reabsorption and internal energy losses in luminescent solar concentrators

    Science.gov (United States)

    Digaum, Jennefir; Kuebler, Stephen M.

    2014-03-01

    As a complementary device to photovoltaic (PV) cells, luminescent solar concentrators (LSCs) can reduce the cost of solar energy by replacing the expensive PV material with inexpensive energy-harvesting plastic or glass matrix. However, due to its low efficiency, LSCs are still not commercially viable. The low efficiency is due to the various losses associated with light harvesting and trapping. Most of these losses come from reabsorption and escape of reemitted energy from the LSC device. State-of-the-art LSC technology focuses on decreasing reabsorption loss by employing luminophores with a large Stokes shift. But these materials typically have low quantum yield. Increasing the Stokes shift of the luminophore reduces reabsorption but introduces substantial loss due to low quantum yield and the Stokes shift of the re-emitted photons. The interdependence of these losses is studied computationally using a ray-tracing model that accounts for reabsorption, Stokes shift, escape cone loss, and matrix loss. It is shown that using high Stokesshift luminophores does not give the highest energy efficiency. Higher energy efficiency is obtained by optimizing the Stokes shift. Even greater performance can be achieved by employing high-quantum-yield dyes with intermediate Stokes shift. LSC devices based on this approach could be nearly twice as efficient as those based on conventional luminophores, such as Rhodamine B.

  18. Energy losses of positive and negative charged particles in electron gas

    Science.gov (United States)

    Diachenko, M. M.; Kholodov, R. I.

    2017-02-01

    A heavy charged particle propagation through electron gas has been studied using combination of non-relativistic quantum mechanics and the Green’s functions method. The energy loss of a charged particle has been found in the case of large transferred momentum taking into account the interference term in the expression for the rate. The dependence of the energy loss of a charged particles in electron gas with nonzero temperature on the sign of the charge has been obtained.

  19. Parton energy loss at strong coupling and the universal bound

    CERN Document Server

    Kharzeev, D E

    2008-01-01

    The apparent universality of jet quenching observed in heavy ion collisions at RHIC for light and heavy quarks, as well as for quarks and gluons, is very puzzling and calls for a theoretical explanation. Recently it has been proposed that the synchrotron--like radiation at strong coupling gives rise to a universal bound on the energy of a parton escaping from the medium. Since this bound appears quite low, almost all of the observed particles at high transverse momentum have to originate from the surface of the hot fireball. Here I make a first attempt of checking this scenario against the RHIC data and formulate a "Universal Bound Model" of jet quenching that can be further tested at RHIC and LHC.

  20. Energy loss and straggling of MeV Si ions in gases

    Energy Technology Data Exchange (ETDEWEB)

    Vockenhuber, C., E-mail: vockenhuber@phys.ethz.ch [Laboratory of Ion Beam Physics, ETH Zurich, Otto-Stern-Weg 5, 8093 Zurich (Switzerland); Arstila, K. [Department of Physics, University of Jyväskylä, 40014 Jyväskylä (Finland); Jensen, J. [Department of Physics, Chemistry and Biology, Linköping University, 581 83 Linköping (Sweden); Julin, J.; Kettunen, H.; Laitinen, M.; Rossi, M.; Sajavaara, T. [Department of Physics, University of Jyväskylä, 40014 Jyväskylä (Finland); Thöni, M. [Laboratory of Ion Beam Physics, ETH Zurich, Otto-Stern-Weg 5, 8093 Zurich (Switzerland); Whitlow, H.J. [Institut des Microtechnologies Appliquées Arc, Haute Ecole Arc Ingénierie, 2300 La Chaux-de-Fonds (Switzerland)

    2017-01-15

    We present measurements of energy loss and straggling of Si ions in gases. An energy range from 0.5 to 12 MeV/u was covered using the 6 MV EN tandem accelerator at ETH Zurich, Switzerland, and the K130 cyclotron accelerator facility at the University of Jyväskylä, Finland. Our energy-loss data compare well with calculation based on the SRIM and PASS code. The new straggling measurements support a pronounced peak in He gas at around 4 MeV/u predicted by recent theoretical calculations. The straggling curve structure in the other gases (N{sub 2}, Ne, Ar, Kr) is relatively flat in the covered energy range. Although there is a general agreement between the straggling data and the theoretical calculations, the experimental uncertainties are too large to confirm or exclude the predicted weak multi-peak structure in the energy-loss straggling.

  1. Energy loss and straggling of MeV Si ions in gases

    Science.gov (United States)

    Vockenhuber, C.; Arstila, K.; Jensen, J.; Julin, J.; Kettunen, H.; Laitinen, M.; Rossi, M.; Sajavaara, T.; Thöni, M.; Whitlow, H. J.

    2017-01-01

    We present measurements of energy loss and straggling of Si ions in gases. An energy range from 0.5 to 12 MeV/u was covered using the 6 MV EN tandem accelerator at ETH Zurich, Switzerland, and the K130 cyclotron accelerator facility at the University of Jyväskylä, Finland. Our energy-loss data compare well with calculation based on the SRIM and PASS code. The new straggling measurements support a pronounced peak in He gas at around 4 MeV/u predicted by recent theoretical calculations. The straggling curve structure in the other gases (N2, Ne, Ar, Kr) is relatively flat in the covered energy range. Although there is a general agreement between the straggling data and the theoretical calculations, the experimental uncertainties are too large to confirm or exclude the predicted weak multi-peak structure in the energy-loss straggling.

  2. COMPONENTS OF TOTAL ELECTRIC ENERGY LOSSES POWER IN PQR SPATIAL COORDINATES

    Directory of Open Access Journals (Sweden)

    G.G. Zhemerov

    2016-05-01

    Full Text Available Purpose. To obtain relations determining the components of the total losses power with p-q-r power theory for three-phase four-wire energy supply systems, uniquely linking four components: the lowest possible losses power, losses power caused by the reactive power, losses power caused by the instantaneous active power pulsations, losses power caused by current flowing in the neutral wire. Methodology. We have applied concepts of p-q-r power theory, the theory of electrical circuits and mathematical simulation in Matlab package. Results. We have obtained the exact relation, which allows to calculate the total losses power in the three-phase four-wire energy supply system using three components corresponding to the projections of the generalized vectors of voltage and current along the pqr axis coordinates. Originality. For the first time, we have established a mathematical relationship between spatial representation of instantaneous values of the vector components and the total losses power in the three-phase four-wire energy supply systems. Practical value. We have elucidated an issue that using the proposed methodology would create a measuring device for determining the current value of the components of total losses power in three-phase systems. The device operates with measuring information about instantaneous values of currents and voltages.

  3. Route Planning and Estimate of Heat Loss of Hot Water Transportation Piping for Fuel Cell Local Energy Network

    Science.gov (United States)

    Obara, Shinya; Kudo, Kazuhiko

    The method of supplying the electric power and heat energy for the energy demand of buildings by Centralized system type and distributed system type of fuel cell network is studied. The hot-water piping route planning program of fuel cell network was developed by using genetic algorithm based on the view of TSP ( Traveling salesman problem) . In this program, the piping route planning which minimizes the quantity of heat loss in hot-water piping can be performed. The residential section model of Sapporo city of 74 buildings was analyzed, and the quantity of heat loss from the hot-water piping of both systems was estimated. Consequently, the ratio of the quantity of heat loss of a distributed system to a centralized system was about 50% in the full year average. This program is introduced into the route planning of hot- Water piping system of the fuel cell network, and plan to reduce the quantity of heat loss in a distributed system will be made.

  4. Density measurement of thin layers by electron energy loss spectroscopy (EELS).

    Science.gov (United States)

    Thomas, Jürgen; Ramm, Jürgen; Gemming, Thomas

    2013-07-01

    A method to measure the density of thin layers is presented which utilizes electron energy loss spectroscopy (EELS) techniques within a transmission electron microscope. The method is based on the acquisition of energy filtered images in the low loss region as well as of an element distribution map using core loss edges. After correction of multiple inelastic scattering effects, the intensity of the element distribution map is proportional to density and thickness. The dependence of the intensities of images with low energy loss electrons on the density is different from that. This difference allows the calculation of the relative density pixel by pixel and to determine lateral density gradients or fluctuations in thin films without relying on a constant specimen thickness. The method is demonstrated at thin carbon layers produced with density gradients.

  5. Hysteresis model and statistical interpretation of energy losses in non-oriented steels

    Energy Technology Data Exchange (ETDEWEB)

    Mănescu, Veronica, E-mail: veronica.paltanea@upb.ro; Păltânea, Gheorghe; Gavrilă, Horia

    2016-04-01

    In this paper the hysteresis energy losses in two non-oriented industrial steels (M400-65A and M800-65A) were determined, by means of an efficient classical Preisach model, which is based on the Pescetti–Biorci method for the identification of the Preisach density. The excess and the total energy losses were also determined, using a statistical framework, based on magnetic object theory. The hysteresis energy losses, in a non-oriented steel alloy, depend on the peak magnetic polarization and they can be computed using a Preisach model, due to the fact that in these materials there is a direct link between the elementary rectangular loops and the discontinuous character of the magnetization process (Barkhausen jumps). To determine the Preisach density it was necessary to measure the normal magnetization curve and the saturation hysteresis cycle. A system of equations was deduced and the Preisach density was calculated for a magnetic polarization of 1.5 T; then the hysteresis cycle was reconstructed. Using the same pattern for the Preisach distribution, it was computed the hysteresis cycle for 1 T. The classical losses were calculated using a well known formula and the excess energy losses were determined by means of the magnetic object theory. The total energy losses were mathematically reconstructed and compared with those, measured experimentally.

  6. Hysteresis model and statistical interpretation of energy losses in non-oriented steels

    Science.gov (United States)

    Mănescu (Păltânea), Veronica; Păltânea, Gheorghe; Gavrilă, Horia

    2016-04-01

    In this paper the hysteresis energy losses in two non-oriented industrial steels (M400-65A and M800-65A) were determined, by means of an efficient classical Preisach model, which is based on the Pescetti-Biorci method for the identification of the Preisach density. The excess and the total energy losses were also determined, using a statistical framework, based on magnetic object theory. The hysteresis energy losses, in a non-oriented steel alloy, depend on the peak magnetic polarization and they can be computed using a Preisach model, due to the fact that in these materials there is a direct link between the elementary rectangular loops and the discontinuous character of the magnetization process (Barkhausen jumps). To determine the Preisach density it was necessary to measure the normal magnetization curve and the saturation hysteresis cycle. A system of equations was deduced and the Preisach density was calculated for a magnetic polarization of 1.5 T; then the hysteresis cycle was reconstructed. Using the same pattern for the Preisach distribution, it was computed the hysteresis cycle for 1 T. The classical losses were calculated using a well known formula and the excess energy losses were determined by means of the magnetic object theory. The total energy losses were mathematically reconstructed and compared with those, measured experimentally.

  7. Energy loss of protons in SrTiO{sub 3} studied by medium energy ion scattering

    Energy Technology Data Exchange (ETDEWEB)

    Dedyulin, S.N., E-mail: sdedyuli@uwo.ca [Department of Physics and Astronomy, Western University, London, Ontario, N6A 3K7 (Canada); Singh, M.P.; Razavi, F.S. [Department of Physics, Brock University, St. Catherines, Ontario, L2S 3A1 (Canada); Goncharova, L.V. [Department of Physics and Astronomy, Western University, London, Ontario, N6A 3K7 (Canada)

    2012-10-01

    The energy loss of medium energy protons (55-170 keV/amu) was studied for a thin SrTiO{sub 3} film on Si. The thickness of the film and the structure of the SrTiO{sub 3}/Si interface was determined by the combination of X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry (RBS) and medium energy ion scattering (MEIS). These film parameters, together with energy losses extracted from MEIS spectra, were used to calculate stopping cross sections of SrTiO{sub 3} by an iterative procedure. In comparison with Andersen and Ziegler values, the data are systematically lower over the whole energy range.

  8. CMB bounds on dark matter annihilation: Nucleon energy losses after recombination

    NARCIS (Netherlands)

    Weniger, C.; Serpico, P.D.; Iocco, F.; Bertone, G.

    2013-01-01

    We consider the propagation and energy losses of protons and antiprotons produced by dark matter annihilation at redshifts 100energy injected into e± and γ’s, b

  9. Quark Energy Loss and Shadowing in Nuclear Drell-Yan Process

    Institute of Scientific and Technical Information of China (English)

    DUAN Chun-Gui; CUI Shu-Wen; YAN Zhan-Yuan

    2005-01-01

    The energy loss effect in nuclear matter is another nuclear effect apart from the nuclear effects on the parton distribution as in deep inelastic scattering process. The quark energy loss can be measured best by the nuclear dependence of the high energy nuclear Drell-Yan process. By means of three kinds of quark energy loss parameterizations given in literature and the nuclear parton distribution extracted only with lepton-nucleus deep inelastic scattering experimental data, measured Drell-Yan production cross sections are analyzed for 800 GeV proton incident on a variety of nuclear targets from FNAL E866. It is shown that our results with considering the energy loss effect are much different from those of the FNAL E866, who analyzes the experimental data with the nuclear parton distribution functions obtained by using the deep inelastic IA collisions and pA nuclear Drell-Yan data. Considering the existence of energy loss effect in Drell-Yan lepton pairs production, we suggest that the extraction of nuclear parton distribution functions should not include Drell-Yan experimental data.

  10. Quark Energy Loss and Shadowing in Nuclear Drell-Yan Process

    Institute of Scientific and Technical Information of China (English)

    DUANChun-Gui; CUIShu-Wen; YANZhan-Yuan

    2005-01-01

    The energy loss effect in nuclear matter is another nuclear effect apart from the nuclear effects on the parton distribution as in deep inelastic scattering process. The quark energy loss can be measured best by the nuclear dependence of the high energy nuclear Dre11-Yan process. By means of three kinds of quark energy loss parameterizations given in literature and the nuclear parton distribution extracted only with lepton-nucleus deep inelastic scattering experimental data, measured Dre11-Yan production cross sections are analyzed for 800 GeV proton incident on a variety of nuclear targets from FNAL E866. It is shown that our results with considering the energy loss effect are much different from those of the FNAL E866, who analyzes the experimental data with the nuclear parton distribution functions obtained by using the deep inelastic IA collisions and pA nuclear Drell-Yan data. Considering the existence of energy loss effect in Drell-Yan lepton pairs production, we suggest that the extraction of nuclear parton distribution functions shoul""""d not include Dre11-Yan experimental data.

  11. A new beam loss detector for low-energy proton and heavy-ion accelerators

    Science.gov (United States)

    Liu, Zhengzheng; Crisp, Jenna; Russo, Tom; Webber, Robert; Zhang, Yan

    2014-12-01

    The Facility for Rare Isotope Beams (FRIB) to be constructed at Michigan State University shall deliver a continuous, 400 kW heavy ion beam to the isotope production target. This beam is capable of inflicting serious damage on accelerator components, e.g. superconducting RF accelerating cavities. A Beam Loss Monitoring (BLM) System is essential for detecting beam loss with sufficient sensitivity and promptness to inform the machine protection system (MPS) and operations personnel of impending dangerous losses. Radiation transport simulations reveal shortcomings in the use of ionization chambers for the detection of beam losses in low-energy, heavy-ion accelerators. Radiation cross-talk effects due to the folded geometry of the FRIB LINAC pose further complications to locating specific points of beam loss. We propose a newly developed device, named the Loss Monitor Ring (LMR1

  12. Energy Loss of Fast Quarks in Nuclear Drell-Yan Dimuon Production

    Institute of Scientific and Technical Information of China (English)

    DUAN Chun-Gui; CUI Shu-Wen; SHEN Peng-Nian; LI Guang-Lie

    2004-01-01

    @@ The energy loss effect in nuclear matter, which is another nuclear effect apart from the nuclear effects on the parton distribution as in the deep inelastic scattering process, can be measured best by the nuclear dependence of the high energy nuclear Drell-Yan process. By means of the quark energy loss parametrization given in literature and the nuclear parton distribution extracted only with lepton-nucleus deep inelastic scattering experimental data, measured Drell-Yan production cross sections are analysed for 800-GeV protons incident on a variety of nuclear targets from FNAL E866.

  13. On the Trade-off between Energy Consumption and Food Quality Loss in Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    Cai, Junping; Jensen, Jørgen Bauck; Skogestad, Sigurd

    2008-01-01

    This paper studies the trade-off between energy consumption and food quality loss, at varying ambient conditions, in supermarket refrigeration systems. Compared with the traditional operation with pressure control, a large potential for energy savings without extra loss of food quality...... is demonstrated. We also show that by utilizing the relatively slow dynamics of the food temperature, compared with the air temperature, we are able to further lower both the energy consumption and the peak value of power requirement. The Pareto optimal curve is found by off-line optimization....

  14. Energy loss to intravalley acoustic modes in nano-dimensional wire structures at low temperatures

    Science.gov (United States)

    Nag, S.; Das, B.; Basu, A.; Das, J.; Bhattacharya, D. P.; Sarkar, C. K.

    2017-03-01

    The theory of rate of loss of energy of non-equilibrium electrons due to inelastic interaction with the intravalley acoustic phonons in a nano-dimensional semiconductor wire has been developed under the condition of low lattice temperature, when the approximations of the well known traditional theory are not valid. Numerical results are obtained for narrow-channel GaAs-GaAlAs wires structures. On comparison with other available results it is revealed that the finite energy of the intravalley acoustic phonons and, the use of the full form of the phonon distribution without truncation to the equipartition law, produce significant changes in the energy loss characteristics at low temperatures.

  15. On Energy Diagnosis of Steam Power Plants: A Comparison among Three Global Losses Formulations

    Directory of Open Access Journals (Sweden)

    Rodolfo Taccani

    2002-12-01

    Full Text Available

    The objectives of energy systems diagnosis are: i identifying components responsible for highest losses increments in comparison with design conditions, ii quantifying energy-efficiency recovery when design conditions are restored in a particular system component. In this paper the energy diagnosis of an existing steam power plant is faced on the basis of three different formulae expressing global losses.

    A simulation model of a real 320 MW steam power plant has been implemented with a commercial modular energy systems simulation software (Aspen+. The functional decay of different components of the plant has been simulated using the model. The results show that the components actually responsible for the additional power losses can be identified and the effect of restoring design conditions can be quantified in most cases with sufficient approximation by using the General Formula for the Efficiency or the Lost work Impact Formula (developed in the ambit of thermoeconomics.

  16. Effect of energetic ion loss on ICRF heating efficiency and energy confinement time in heliotrons

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, S.; Nakajima, N.; Okamoto, M. [National Inst. for Fusion Science, Toki, Gifu (Japan); Nuehrenberg, J.

    1999-06-01

    ICRF heating efficiency and the global energy confinement time during ICRF heating are investigated including the effect of energetic ion loss in heliotrons. The approximate formula of ICRF heating efficiency is derived using the results based on Monte Carlo simulations. The global energy confinement time including energetic ion effect can be expressed in terms of ICRF heating power, plasma density, and magnetic field strength in heliotrons. Our results in the CHS plasma show the systematic decrement of the global energy confinement time due to the energetic ion loss from the assumed energy confinement scaling law, which is consistent with the experimental observations. Also we apply our model to the ICRF minority heating in the LHD plasma in two cases of typical magnetic configurations. The clear increment of the global energy confinement time due to the stored energy of energetic tail ions is obtained in the `orbit improved` configuration, while the decrement is observed in the `standard` configuration. (author)

  17. Steady-state heat losses in pipes for low-energy district heating

    DEFF Research Database (Denmark)

    Dalla Rosa, Alessandro; Li, Hongwei; Svendsen, Svend

    2010-01-01

    of low-energy DH systems. Various design concepts are considered in this paper: flexible pre-insulated twin pipes with symmetrical or asymmetrical insulation, double pipes, triple pipes. These technologies are potentially energyefficient and cost-effective solutions for DH networks in low-heat density......The synergy between highly energy efficient buildings and low-energy district heating (DH) systems is a promising concept for the optimal integration of energy saving policies and energy supply systems based on renewable energy (RE). Distribution heat losses represent a key factor in the design...... areas. We start with a review of theories and methods for steady-state heat loss calculation. Next, the article shows how detailed calculations with 2D-modeling of pipes can be carried out by means of computer software based on the finite element method (FEM). The model was validated by comparison...

  18. Method and apparatus for low-loss storage of thermal energy and for low-loss withdrawal of the stored thermal energy

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, U.

    1980-08-26

    A mehtod is described for low-loss thermal energy storage in and withdrawal from a heat accumulator connected with an energy source and a heat consumer in a circulatory system through which a heat-carrying flow medium circulates. The method consits of passing the flow medium through the energy source so as to withdraw thermal energy from the energy source and effect absorption of the thermal energy by the flow medium, guiding the flow medium in respective layers within the heat accumulator in a direction from the center of the heat accumulator toward the periphery thereof so as to store the thermal energy in a heat storage mass disposed in the heat accumulator; and guiding the flow medium in the layers thereof through the heat accumulator in a direction from the periphery of the heat accumulator to the center thereof, and passing the flow medium from the heat accumulator through the consumer so as to withdraw thermal energy therefrom and transfer it to the consumer.

  19. Density Functional Theory Modeling of Low-Loss Electron Energy-Loss Spectroscopy in Wurtzite III-Nitride Ternary Alloys.

    Science.gov (United States)

    Eljarrat, Alberto; Sastre, Xavier; Peiró, Francesca; Estradé, Sónia

    2016-06-01

    In the present work, the dielectric response of III-nitride semiconductors is studied using density functional theory (DFT) band structure calculations. The aim of this study is to improve our understanding of the features in the low-loss electron energy-loss spectra of ternary alloys, but the results are also relevant to optical and UV spectroscopy results. In addition, the dependence of the most remarkable features with composition is tested, i.e. applying Vegard's law to band gap and plasmon energy. For this purpose, three wurtzite ternary alloys, from the combination of binaries AlN, GaN, and InN, were simulated through a wide compositional range (i.e., Al x Ga1-x N, In x Al1-x N, and In x Ga1-x N, with x=[0,1]). For this DFT calculations, the standard tools found in Wien2k software were used. In order to improve the band structure description of these semiconductor compounds, the modified Becke-Johnson exchange-correlation potential was also used. Results from these calculations are presented, including band structure, density of states, and complex dielectric function for the whole compositional range. Larger, closer to experimental values, band gap energies are predicted using the novel potential, when compared with standard generalized gradient approximation. Moreover, a detailed analysis of the collective excitation features in the dielectric response reveals their compositional dependence, which sometimes departs from a linear behavior (bowing). Finally, an advantageous method for measuring the plasmon energy dependence from these calculations is explained.

  20. Energy loss straggling in Aluminium foils for Li and C ions in fractional energy loss limits (ΔE/E) ∼10-60%

    Science.gov (United States)

    Diwan, P. K.; Kumar, Sunil; Kumar, Shyam; Sharma, V.; Khan, S. A.; Avasthi, D. K.

    2016-02-01

    The energy loss straggling of Li and C ions in Al foils of various thicknesses has been measured, within the fractional energy loss limit (∆E/E) ∼ 10-60%. These measurements have been performed using the 15UD Pelletron accelerator facility available at Inter University Accelerator Centre (IUAC), New Delhi, India. The measured straggling values have been compared with the corresponding predicted values adopting popularly used collisional straggling formulations viz Bohr, Lindhard and Scharff, Bethe-Livingston, Titeica. In addition, the experimental data has been compared to the Yang et al. empirical formula and Close Form Model, recently proposed by Montanari et al. The straggling values derived by Titeica theory were found to be in better agreement with the measured values as compared to other straggling formulations. The charge-exchange straggling component has been estimated from the measured data based on Titeica's theory. Finally, a function of the ion effective charge and the energy loss fraction within the target has been fitted to the latter straggling component.

  1. Changes in Energy Expenditure with Weight Gain and Weight Loss in Humans.

    Science.gov (United States)

    Müller, Manfred J; Enderle, Janna; Bosy-Westphal, Anja

    2016-12-01

    Metabolic adaptation to weight changes relates to body weight control, obesity and malnutrition. Adaptive thermogenesis (AT) refers to changes in resting and non-resting energy expenditure (REE and nREE) which are independent from changes in fat-free mass (FFM) and FFM composition. AT differs in response to changes in energy balance. With negative energy balance, AT is directed towards energy sparing. It relates to a reset of biological defence of body weight and mainly refers to REE. After weight loss, AT of nREE adds to weight maintenance. During overfeeding, energy dissipation is explained by AT of the nREE component only. As to body weight regulation during weight loss, AT relates to two different set points with a settling between them. During early weight loss, the first set is related to depleted glycogen stores associated with the fall in insulin secretion where AT adds to meet brain's energy needs. During maintenance of reduced weight, the second set is related to low leptin levels keeping energy expenditure low to prevent triglyceride stores getting too low which is a risk for some basic biological functions (e.g., reproduction). Innovative topics of AT in humans are on its definition and assessment, its dynamics related to weight loss and its constitutional and neuro-endocrine determinants.

  2. Comparative analysis of characteristic electron energy loss spectra and inelastic scattering cross-section spectra of Fe

    Science.gov (United States)

    Parshin, A. S.; Igumenov, A. Yu.; Mikhlin, Yu. L.; Pchelyakov, O. P.; Zhigalov, V. S.

    2016-05-01

    The inelastic electron scattering cross section spectra of Fe have been calculated based on experimental spectra of characteristic reflection electron energy loss as dependences of the product of the inelastic mean free path by the differential inelastic electron scattering cross section on the electron energy loss. It has been shown that the inelastic electron scattering cross-section spectra have certain advantages over the electron energy loss spectra in the analysis of the interaction of electrons with substance. The peaks of energy loss in the spectra of characteristic electron energy loss and inelastic electron scattering cross sections have been determined from the integral and differential spectra. It has been shown that the energy of the bulk plasmon is practically independent of the energy of primary electrons in the characteristic electron energy loss spectra and monotonically increases with increasing energy of primary electrons in the inelastic electron scattering cross-section spectra. The variation in the maximum energy of the inelastic electron scattering cross-section spectra is caused by the redistribution of intensities over the peaks of losses due to various excitations. The inelastic electron scattering cross-section spectra have been analyzed using the decomposition of the spectra into peaks of the energy loss. This method has been used for the quantitative estimation of the contributions from different energy loss processes to the inelastic electron scattering cross-section spectra of Fe and for the determination of the nature of the energy loss peaks.

  3. High-resolution monochromated electron energy-loss spectroscopy of organic photovoltaic materials.

    Science.gov (United States)

    Alexander, Jessica A; Scheltens, Frank J; Drummy, Lawrence F; Durstock, Michael F; Hage, Fredrik S; Ramasse, Quentin M; McComb, David W

    2017-09-01

    Advances in electron monochromator technology are providing opportunities for high energy resolution (10 - 200meV) electron energy-loss spectroscopy (EELS) to be performed in the scanning transmission electron microscope (STEM). The energy-loss near-edge structure in core-loss spectroscopy is often limited by core-hole lifetimes rather than the energy spread of the incident illumination. However, in the valence-loss region, the reduced width of the zero loss peak makes it possible to resolve clearly and unambiguously spectral features at very low energy-losses (photovoltaics (OPVs): poly(3-hexlythiophene) (P3HT), [6,6] phenyl-C61 butyric acid methyl ester (PCBM), copper phthalocyanine (CuPc), and fullerene (C60). Data was collected on two different monochromated instruments - a Nion UltraSTEM 100 MC 'HERMES' and a FEI Titan(3) 60-300 Image-Corrected S/TEM - using energy resolutions (as defined by the zero loss peak full-width at half-maximum) of 35meV and 175meV, respectively. The data was acquired to allow deconvolution of plural scattering, and Kramers-Kronig analysis was utilized to extract the complex dielectric functions. The real and imaginary parts of the complex dielectric functions obtained from the two instruments were compared to evaluate if the enhanced resolution in the Nion provides new opto-electronic information for these organic materials. The differences between the spectra are discussed, and the implications for STEM-EELS studies of advanced materials are considered. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Integrating the flexibility of the average Serbian consumer as a virtual storage option into the planning of energy systems

    OpenAIRE

    2014-01-01

    With the integration of more variable renewable energy, the need for storage is growing. Rather than utility scale storage, smart grid technology (not restricted, but mainly involving bidirectional communication between the supply and demand side and dynamic pricing) enables flexible consumption to be a virtual storage alternative for moderation of the production of variable renewable energy sources on the micro grid level. A study, motivated with energy lo...

  5. Neutrino energy loss by electron capture on strongly screened iron group nuclei

    Institute of Scientific and Technical Information of China (English)

    Liu Jing-Jing; Luo Zhi-Quan

    2007-01-01

    The influences on the neutrino energy loss rates in iron group nuclei at the same density are investigated in the presence of strong electron screening and in the absence of electron screening. The results show that at a temperature of 15 × 109 K, the neutrino energy loss rates which come from the electron capture processfor most iron group nuclei decrease no more than 2 orders of magnitude but for the others (such as 53,55,56,57,58,59,60Co, 56,59Ni) they can decrease about 3 orders of magnitude due to strong electron screening (SES), whereas, at a temperature of 109K the neutrino energy loss rates of the most iron group nuclei can be diminished greatly due to the SES. For example, 61Fe, 60Fe,and 62Ni the neutrino energy loss rates decrease about 4, 15 and 16 orders of magnitude and for 57Cr, 58Cr, and 60Cr decrease about 18, 12, and 10 orders of magnitude respectively. According to our calculations the neutrino energy loss rates of nuclei 58Mn, 59Mn, 60Mn, and 62Mn may decrease about 13 orders of magnitude at a temperature of 109 K due to the SES.

  6. Restricted energy loss of ultrarelativistic particles in thin targets - A search for deviations from constancy

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, K.K.; Esberg, J.; Hansen, K.R.; Knudsen, H.; Lund, M.; Thomsen, H.D. [Department of Physics and Astronomy, University of Aarhus, Ny Munkegade, 8000 Aarhus (Denmark); Uggerhoj, U.I., E-mail: ulrik@phys.au.d [Department of Physics and Astronomy, University of Aarhus, Ny Munkegade, 8000 Aarhus (Denmark); Moller, S.P. [Institute for Storage Ring Facilities, University of Aarhus (Denmark); Sona, P. [University of Florence, Florence (Italy); Mangiarotti, A. [LIP, Universidade de Coimbra (Portugal); Ketel, T.J. [Free University, Amsterdam (Netherlands); Dizdar, A. [University of Istanbul, Istanbul (Turkey); Ballestrero, S. [University of Johannesburg, Johannesburg (South Africa)

    2010-05-01

    Experimental results for the restricted energy loss of ultrarelativistic electrons, with Lorentz factors up to 3x10{sup 5}, in a 535mum thin silicon detector are presented. The combination of high Lorentz factors and thin targets, opens for the possibility to study two mutually excluding effects, both based upon theory and on scarce experimental observations. One is a disappearance of the density effect when the transit time becomes so short that the effect of plasma-oscillations becomes negligible. This would result in an increased energy loss as the Lorentz factor increases. The other is an effect based on the existence of a coherence length over which there are contributions to the energy loss. This effect leads to a substantially decreased energy loss for thin targets as the Lorentz factor increases. The latter is shown to be incompatible with our measurements, whereas the former may be present with a correction of a few percent to an otherwise constant energy loss. Furthermore, we point to significant effects related to synchrotron and transition radiation, that must be carefully considered in a possible future experiment, and may as well have been of significance for the conclusion in earlier experiments.

  7. Athermal Energy Loss from X-rays Deposited in Thin Superconducting Films on Solid Substrates

    Science.gov (United States)

    Kozorezov, Alexander G.; Lambert, Colin J.; Bandler, Simon R.; Balvin, Manuel A.; Busch, Sarah E.; Sagler, Peter N.; Porst, Jan-Patrick; Smith, Stephen J.; Stevenson, Thomas R.; Sadleir, John E.

    2013-01-01

    When energy is deposited in a thin-film cryogenic detector, such as from the absorption of an X-ray, an important feature that determines the energy resolution is the amount of athermal energy that can be lost to the heat bath prior to the elementary excitation systems coming into thermal equilibrium. This form of energy loss will be position-dependent and therefore can limit the detector energy resolution. An understanding of the physical processes that occur when elementary excitations are generated in metal films on dielectric substrates is important for the design and optimization of a number of different types of low temperature detector. We have measured the total energy loss in one relatively simple geometry that allows us to study these processes and compare measurements with calculation based upon a model for the various di.erent processes. We have modeled the athermal phonon energy loss in this device by finding an evolving phonon distribution function that solves the system of kinetic equations for the interacting system of electrons and phonons. Using measurements of device parameters such as the Debye energy and the thermal di.usivity we have calculated the expected energy loss from this detector geometry, and also the position-dependent variation of this loss. We have also calculated the predicted impact on measured spectral line-shapes, and shown that they agree well with measurements. In addition, we have tested this model by using it to predict the performance of a number of other types of detector with di.erent geometries, where good agreement is also found.

  8. Jet suppression and the flavor dependence of partonic energy loss with ATLAS

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00364770; The ATLAS collaboration

    2016-01-01

    In relativistic heavy ion collisions, a hot medium with a high density of unscreened color charges is produced. One manifestation of the energy loss of jets propagating through the medium is a lower yield of jets and hadrons emerging from this medium than expected in the absence of medium effects. Therefore modifications of the jet yield are directly sensitive to the energy loss mechanism. Furthermore, jets with different flavor content are expected to be affected by the medium in different ways. In this publication, the latest ATLAS results on single hadron suppression along with the complementary measurements of single jet suppression are presented. Rapidity dependence, which is sensitive to the relative energy loss between quark and gluon jets, is discussed. Finally, a new measurement of jet fragmentation functions is presented.

  9. Technical and Economic Assessment of the Implementation of Measures for Reducing Energy Losses in Distribution Systems

    Science.gov (United States)

    Aguila, Alexander; Wilson, Jorge

    2017-07-01

    This paper develops a methodology to assess a group of measures of electrical improvements in distribution systems, starting from the complementation of technical and economic criteria. In order to solve the problem of energy losses in distribution systems, technical and economic analysis was performed based on a mathematical model to establish a direct relationship between the energy saved by way of minimized losses and the costs of implementing the proposed measures. This paper aims at analysing the feasibility of reducing energy losses in distribution systems, by changing existing network conductors by larger crosssection conductors and distribution voltage change at higher levels. The impact of this methodology provides a highly efficient mathematical tool for analysing the feasibility of implementing improvement projects based on their costs which is a very useful tool for the distribution companies that will serve as a starting point to the analysis for this type of projects in distribution systems.

  10. Energy loss of MeV protons specularly reflected from metal surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Juaristi, J.I. [Departamento Fisica de Materiales, Facultad de Quimicas, Universidad del Pais Vasco/Euskal Herriko Unibersitatea, Apartado Postal 1072, 20080 San Sebastian (Spain); Garcia de Abajo, F.J. [Departamento Ciencias de la Computacion e Inteligencia Artificial, Facultad de Informatica, Universidad del Pais Vasco/Euskal Herriko Unibersitatea, Apartado Postal 649, 20080 San Sebastian (Spain); Echenique, P.M. [Departamento Fisica de Materiales, Facultad de Quimicas, Universidad del Pais Vasco/Euskal Herriko Unibersitatea, Apartado Postal 1072, 20080 San Sebastian (Spain)

    1996-05-01

    A parameter-free model is presented to study the energy loss of fast protons specularly reflected from metal surfaces. The contributions to the energy loss from excitation of valence-band electrons and ionization of localized target-atom electronic states are calculated separately. The former is calculated from the induced surface wake potential using linear response theory and the specular-reflection model, while the latter is calculated in the first Born approximation. The results obtained are in good agreement with available experimental data. However, the experimental qualitative trend of the energy loss as a function of the angle of incidence is obtained when the valence-band electron model is replaced by localized target atom electron states, though with a worse quantitative agreement. {copyright} {ital 1996 The American Physical Society.}

  11. Jet suppression and the flavor dependence of partonic energy loss with ATLAS

    Science.gov (United States)

    Kosek, Tomas

    2016-12-01

    In relativistic heavy ion collisions, a hot medium with a high density of unscreened color charges is produced. One manifestation of the energy loss of jets propagating through the medium is a lower yield of jets and hadrons emerging from this medium than expected in the absence of medium effects. Therefore modifications of the jet yield are directly sensitive to the energy loss mechanism. Furthermore, jets with different flavor content are expected to be affected by the medium in different ways. In this publication, the latest ATLAS results on single hadron suppression along with the complementary measurements of single jet suppression are presented. Rapidity dependence, which is sensitive to the relative energy loss between quark and gluon jets, is discussed. Finally, a new measurement of jet fragmentation functions is presented.

  12. Absolute Determination of Optical Constants by a Direct Physical Modeling of Reflection Electron Energy Loss Spectra

    CERN Document Server

    Xu, H; Toth, J; Tokesi, K; Ding, Z J

    2016-01-01

    We present an absolute extraction method of optical constants of metal from the measured reflection electron energy loss (REELS) spectra by using the recently developed reverse Monte Carlo (RMC) technique. The method is based on a direct physical modeling of electron elastic and electron inelastic scattering near the surface region where the surface excitation becomes important to fully describe the spectrum loss feature intensity in relative to the elastic peak intensity. An optimization procedure of oscillator parameters appeared in the energy loss function (ELF) for describing electron inelastic scattering due to the bulk- and surface-excitations was performed with the simulated annealing method by a successive comparison between the measured and Monte Carlo simulated REELS spectra. The ELF and corresponding optical constants of Fe were obtained from the REELS spectra measured at incident energies of 1000, 2000 and 3000 eV. The validity of the present optical data has been verified with the f- and ps-sum r...

  13. An analytic solution for energy loss and time-of-flight calculations for intermediate-energy light ions

    NARCIS (Netherlands)

    Snellings, RJM; Hulsbergen, W; Prendergast, EP; van den Brink, A; de Haas, AP; Habets, JJLM; Kamermans, R; Koopmans, M; Kuijer, PG; de Laat, CTAM; Ostendorf, RW; Peghaire, A; Rossewij, M

    1999-01-01

    Particle identification in intermediate heavy-ion collisions, using a modern 4 pi detector which contains several active layers, relies on a parametrisation or numerical integration of the energy loss in thick layers of detector material for different ions. Here an analytical solution applicable ove

  14. Electron energy loss spectroscopy with parallel readout of energy and momentum

    CERN Document Server

    Ibach, Harald; Sforzini, Jessica; Soubatch, Serguei; Tautz, F Stefan

    2016-01-01

    We introduce a high energy resolution electron source that matches the requirements for parallel readout of energy and momentum of modern hemispherical electron energy analyzers. The system is designed as an add-on device to typical photoemission chambers. Due to the multiplex gain, a complete phonon dispersion of a Cu(111) surface was measured in seven minutes with 4 meV energy resolution.

  15. Radiation Energy Loss from Laser-Heated Shenguang-Ⅱ Hohlraums

    Institute of Scientific and Technical Information of China (English)

    CHANG Tie-Qiang; HUANG Tian-Xuan; SUN Ke-Xu; WANG Guang-Yu; DUAN Qing-Sheng; PEI Wen-Bing; GU Pei-Jun; ZHANG Xing-Hong; DING Yong-Kun; ZHENG Zhi-Jian; YANG Jia-Min

    2004-01-01

    @@ The x ray energy loss out of laser-heated hohlraum through laser entrance holes (LEH) is discussed in detail according to a simple theoretical model and is compared with the hohlraum experimental data measured at Shenguang Ⅱ laser facility. The radiation loss is considered to be composed of two parts, that is, direct contribution from laser spots and re-emitted part from the x ray-heated hohlraum inner wall, and the former accounts for about 20% of the total loss for the Shenguang Ⅱ hohlraums. Owing to the non-equilibrium characteristics of laser target coupling the direct contribution part is non-equilibrium in spectrum.

  16. Radiative Energy Loss of Heavy Quark and Dead Cone Effect in Ultra-relativistic Heavy Ion Collisions

    Institute of Scientific and Technical Information of China (English)

    XIANG Wen-Chang; DING Heng-Tong; ZHOU Dai-Cui

    2005-01-01

    @@ The lowest-order heavy quark radiative energy loss has been analysed to quantify the dead cone effect. The medium-induced gluon radiation is found to fill the dead cone, it is reduced at large gluon energies compared to the radiation of light quarks. We calculate the radiative energy loss of heavy quarks in the condition of dead cone effect. It is found that the radiative energy loss with dead cone effect is smaller than that without the dead cone effect.

  17. Control of Refrigeration Systems for Trade-off between Energy Consumption and Food Quality Loss

    DEFF Research Database (Denmark)

    Cai, Junping

    by applying two main optimization strategies to traditional refrigeration systems. The first strategy is a new defrost-on-demand scheme, which based on an objective function between quality loss and energy consumption, continuously seeks an optimal time interval for defrosting in dynamic situation. The second...... strategy is through utilization of the thermal mass of the refrigerated foodstuffs, the day-night temperature variation and the capacity control of the compressor, to realize a trade-off between system energy consumption and food quality loss....

  18. Quark energy loss in semi-inclusive deep inelastic scattering of leptons on nuclei

    CERN Document Server

    Song, Li-Hua; 10.1103/Phys.RevC.81.035207

    2011-01-01

    Semi-inclusive deep inelastic scattering on nuclear targets is an ideal tool to study the energy loss effect of an outgoing quark in a nuclear medium. By means of the short hadron formation time, the experimental data with quark hadronization occurring outside the nucleus are picked out. A leading-order analysis is performed for the hadron multiplicity ratios as a function of the energy fraction on helium, neon, and copper nuclei relative to deuteron for the various identified hadrons. It is shown that the nuclear effects on parton distribution functions can be neglected. It is found that the theoretical results considering the nuclear modification of fragmentation functions due to quark energy loss are in good agreement with the experimental data. Whether the quark energy loss is linear or quadratic with the path length is not determined. The obtained energy loss per unit length is 0.38 \\pm 0.03 GeV/fm for an outgoing quark by the global fit.

  19. Restricted energy loss of ultrarelativistic particles in thin targets: A search for deviations from constancy

    CERN Document Server

    Andersen, K K; Hansen, K R; Knudsen, H; Lund, M.; Thomsen, H D; Uggerhoj, U I; Moller, S P; Sona, P; Mangiarotti, A; Ketel, T J; Dizdar, A; Ballestrero, S

    2010-01-01

    Experimental results for the restricted energy loss of ultrarelativistic electrons, with Lorentz factors up to 3x10^5, in a 535@mm thin silicon detector are presented. The combination of high Lorentz factors and thin targets, opens for the possibi lity to study two mutually excluding effects, both based upon theory and on scarce experimental observations. One is a disappearance of the density effect when the transit time becomes so short that the effect of plasma-oscillations becomes negligible. Th is would result in an increased energy loss as the Lorentz factor increases. The other is an effect based on the existence of a coherence length over which there are contributions to the energy loss. This effect leads to a substantially decreased energy l oss for thin targets as the Lorentz factor increases. The latter is shown to be incompatible with our measurements, whereas the former may be present with a correction of a few percent to an otherwise constant energy loss. Furthermore, we point to signifi cant eff...

  20. Energy loss distributions of relativistic protons axially channeled in a bent silicon crystal

    Science.gov (United States)

    Stojanov, Nace; Petrović, Srdjan; Nešković, Nebojša

    2013-05-01

    A detailed study of the energy loss distributions of the relativistic protons axially channeled in the bent Si crystals is presented in this work. The bending angle was varied from 0 to 20 μrad, while the crystal thickness was equal to 1 mm. The proton energy was chosen to be 7 TeV in accordance with the Large Hadron Collider (LHC) project, at the European Organization for Nuclear Research (CERN), in Geneva, Switzerland. The energy loss distributions of the channeled protons were generated using the numerical solution of the proton equations of motion in the transverse plane and the computer simulation method. An accurate energy loss model was used, which takes into account the trajectory dependence of the energy loss of protons during their motion through the crystal channels. Further, the dispersion of the proton's scattering angle caused by its collisions with the electrons of the crystal and the divergence of the proton beam were taken into account. The calculated dependence of the number of dechanneled protons on the bending angle was excellently fitted by the Gompertz type dechanneling function.

  1. Energy loss distributions of relativistic protons axially channeled in a bent silicon crystal

    Energy Technology Data Exchange (ETDEWEB)

    Stojanov, Nace, E-mail: nacestoj@pmf.ukim.mk [Institute of Physics, Faculty of Natural Sciences and Mathematics, Sts. Cyril and Methodius University, P.O. Box 162, 1000 Skopje (Macedonia, The Former Yugoslav Republic of); Petrović, Srdjan; Nešković, Nebojša [Laboratory of Physics (010), Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia)

    2013-05-01

    A detailed study of the energy loss distributions of the relativistic protons axially channeled in the bent < 100 > Si crystals is presented in this work. The bending angle was varied from 0 to 20 μrad, while the crystal thickness was equal to 1 mm. The proton energy was chosen to be 7 TeV in accordance with the Large Hadron Collider (LHC) project, at the European Organization for Nuclear Research (CERN), in Geneva, Switzerland. The energy loss distributions of the channeled protons were generated using the numerical solution of the proton equations of motion in the transverse plane and the computer simulation method. An accurate energy loss model was used, which takes into account the trajectory dependence of the energy loss of protons during their motion through the crystal channels. Further, the dispersion of the proton’s scattering angle caused by its collisions with the electrons of the crystal and the divergence of the proton beam were taken into account. The calculated dependence of the number of dechanneled protons on the bending angle was excellently fitted by the Gompertz type dechanneling function.

  2. Simulation of electron energy loss spectra of nanomaterials with linear-scaling density functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Tait, E. W.; Ratcliff, L. E.; Payne, M. C.; Haynes, P. D.; Hine, N. D. M.

    2016-04-20

    Experimental techniques for electron energy loss spectroscopy (EELS) combine high energy resolution with high spatial resolution. They are therefore powerful tools for investigating the local electronic structure of complex systems such as nanostructures, interfaces and even individual defects. Interpretation of experimental electron energy loss spectra is often challenging and can require theoretical modelling of candidate structures, which themselves may be large and complex, beyond the capabilities of traditional cubic-scaling density functional theory. In this work, we present functionality to compute electron energy loss spectra within the onetep linear-scaling density functional theory code. We first demonstrate that simulated spectra agree with those computed using conventional plane wave pseudopotential methods to a high degree of precision. The ability of onetep to tackle large problems is then exploited to investigate convergence of spectra with respect to supercell size. Finally, we apply the novel functionality to a study of the electron energy loss spectra of defects on the (1 0 1) surface of an anatase slab and determine concentrations of defects which might be experimentally detectable.

  3. Effects of energy supplementation on energy losses and nitrogen balance of steers fed green-chopped wheat pasture I. Calorimetry

    Science.gov (United States)

    Providing an energy supplement to cattle grazing high-quality wheat pasture can increase average daily gain; however the effects on greenhouse gas emissions are not known. Therefore we used 10 British cross-bred steers (initial weight: 206 ± 10.7 kg) in a respiration calorimetry study to evaluate t...

  4. Energy homeostasis and appetite regulating hormones as predictors of weight loss in men and women.

    Science.gov (United States)

    Williams, Rebecca L; Wood, Lisa G; Collins, Clare E; Morgan, Philip J; Callister, Robin

    2016-06-01

    Sex differences in weight loss are often seen despite using the same weight loss program. There has been relatively little investigation of physiological influences on weight loss success in males and females, such as energy homeostasis and appetite regulating hormones. The aims were to 1) characterise baseline plasma leptin, ghrelin and adiponectin concentrations in overweight and obese males and females, and 2) determine whether baseline concentrations of these hormones predict weight loss in males and females. Subjects were overweight or obese (BMI 25-40 kg/m(2)) adults aged 18-60 years. Weight was measured at baseline, and after three and six months participation in a weight loss program. Baseline concentrations of leptin, adiponectin and ghrelin were determined by enzyme-linked immunosorbent assay (ELISA). An independent t-test or non-parametric equivalent was used to determine any differences between sex. Linear regression determined whether baseline hormone concentrations were predictors of six-month weight change. Females had significantly higher baseline concentrations of leptin, adiponectin and unacylated ghrelin as well as ratios of leptin:adiponectin and leptin:ghrelin. The ratio of acylated:unacylated ghrelin was significantly higher in males. In males and females, a higher baseline concentration of unacylated ghrelin predicted greater weight loss at six months. Additionally in females, higher baseline total ghrelin predicted greater weight loss and a higher ratio of leptin:ghrelin predicted weight gain at six months. A higher pre-weight-loss plasma concentration of unacylated ghrelin is a modest predictor of weight loss success in males and females, while a higher leptin:ghrelin ratio is a predictor of weight loss failure in females. Further investigation is required into what combinations and concentrations of these hormones are optimal for weight loss success.

  5. Energy loss distributions of 7 TeV protons channeled in a bent silicon crystals

    Directory of Open Access Journals (Sweden)

    Stojanov Nace

    2013-01-01

    Full Text Available The energy loss distributions of relativistic protons axially channeled through the bent Si crystals, with the constant curvature radius, R = 50 m, are studied here. The proton energy is 7 TeV and the thickness of the crystal is varied from 1 mm to 5 mm, which corresponds to the reduced crystal thickness, L, from 2.1 to 10.6, respectively. The proton energy was chosen in accordance with the large hadron collider project, at the European Organization for Nuclear Research, in Geneva, Switzerland. The energy loss distributions of the channeled protons were generated by the computer simulation method using the numerical solution of the proton equations of motion in the transverse plane. Dispersion of the proton scattering angle caused by its collisions with the crystal’s electrons was taken into account. [Projekat Ministarstva nauke Republike Srbije, br. III 45006

  6. Characterization of Solidified Gas Thin Film Targets via $\\alpha$ Particle Energy Loss

    CERN Document Server

    Fujiwara, M C; Beveridge, J L; Douglas, J L; Huber, T M; Jacot-Guillarmod, R; Kim, S K; Knowles, P E; Kunselman, A R; Maier, M; Marshall, G M; Mason, G R; Mulhauser, F; Olin, A; Petitjean, C; Porcelli, T A; Zmeskal, J

    1996-01-01

    A method is reported for measuring the thickness and uniformity of thin films of solidified gas targets. The energy of alpha particles traversing the film is measured and the energy loss is converted to thickness using the stopping power. The uniformity is determined by measuring the thickness at different positions with an array of sources. Monte Carlo simulations have been performed to study the film deposition mechanism. Thickness calibrations for a TRIUMF solid hydrogen target system are presented.

  7. High-resolution proton energy-loss spectrometer for surface analysis

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, Noriaki; Kanasaki, Junichi; Matsunami, Noriaki; Matsuda, Kouji; Aoki, Masahiko.

    1988-11-01

    We describe a new ion-beam surface analyzer, proton energy loss spectrometer. It analyzes ions incident at 100 keV and scattered by 180degC at solid surfaces with a resolution of 5eV. The results of computer simulation of the energy spectra of scattered ions and the informations on surface electronic and atomic structures possibly derived by the analysis are described. Application of the spectrometer in several areas of science and technology is briefly discussed.

  8. Electron-energy-loss spectral library and its application to materials science

    Energy Technology Data Exchange (ETDEWEB)

    Zaluzec, N.J.

    1983-09-01

    An electron energy loss spectral library can be an invaluable tool in materials research from a fundamental as well as a practical standpoint. Although it will not alleviate all the complications associated with quantification, this type of library can help to elucidate details of spectral profiles previously found intractable. This work was supported by the US Department of Energy. The author also wishes to express his gratitude to the organizing committee for partial financial support provided to attend this meeting.

  9. Energy losses of charged particles in a finite layer of substance

    Science.gov (United States)

    Chechin, V. A.

    1985-04-01

    The energy lost by a charged particle as it crosses a plane-parallel plate with dielectric permittivity in a vacuum is calculated theoretically, applying the intermediate transition to the Heaviside transformation and considering various combinations of particle Lorentz factor and plate thickness. The problems encountered in comparing the theoretical predictions with experimental data are examined, and the application of the model of energy loss in very thin layers of Ermilova et al. (1974) is found to explain the observed anomalies.

  10. Antiferroelectric Thin-Film Capacitors with High Energy-Storage Densities, Low Energy Losses, and Fast Discharge Times.

    Science.gov (United States)

    Ahn, Chang Won; Amarsanaa, Gantsooj; Won, Sung Sik; Chae, Song A; Lee, Dae Su; Kim, Ill Won

    2015-12-09

    We demonstrate a capacitor with high energy densities, low energy losses, fast discharge times, and high temperature stabilities, based on Pb(0.97)Y(0.02)[(Zr(0.6)Sn(0.4))(0.925)Ti(0.075)]O3 (PYZST) antiferroelectric thin-films. PYZST thin-films exhibited a high recoverable energy density of U(reco) = 21.0 J/cm(3) with a high energy-storage efficiency of η = 91.9% under an electric field of 1300 kV/cm, providing faster microsecond discharge times than those of commercial polypropylene capacitors. Moreover, PYZST thin-films exhibited high temperature stabilities with regard to their energy-storage properties over temperatures ranging from room temperature to 100 °C and also exhibited strong charge-discharge fatigue endurance up to 1 × 10(7) cycles.

  11. Energy loss distributions of 7 TeV protons axially channeled in the bent Si crystal

    Science.gov (United States)

    Stojanov, Nace; Petrović, Srdjan

    2016-04-01

    In this article, the energy loss distributions of relativistic protons axially channeled in the bent Si crystal are studied. The crystal thickness is equal to 1 mm, which corresponds to the reduced crystal thickness, Λ, equal to 1.22, whereas the bending angle, α, was varied from 0 to 30 μrad. The proton energy of 7 TeV was chosen in accordance with the concept of using the bent crystals as a tool for selective deflection of the beam halo particles from the LUA9 experiment at LHC. For the continuum interaction potential of the proton and the crystal the Molière's expression was used and the energy loss of a proton was calculated by applying the trajectory dependent stopping power model. Further, the uncertainness of the scattering angle of the proton caused by its collisions with the electrons of the crystal and the divergence of the proton beam were taken into account. The energy loss distribution of the channeled protons was obtained via the numerical solution of the proton equations of motion in the transverse plane and the computer simulation method. The analysis of the obtained theoretical data shows that the shape of the energy loss distribution strongly depends on the horizontal or vertical direction of the curvature of the crystal. The number of dechanneled protons as a function of the bending angle also strongly depends on the direction of the crystal's curvature. As a result, the dechanneling rates and ranges, obtained from the Gompertz type sigmoidal fitting functions, have different sets of values for different bending orientations. We have also studied the influence of the proton beam divergence on the energy loss distribution of channeled protons.

  12. A proximal retarding field analyzer for scanning probe energy loss spectroscopy

    Science.gov (United States)

    Bauer, Karl; Murphy, Shane; Palmer, Richard E.

    2017-03-01

    A compact proximal retarding field analyzer for scanning probe energy loss spectroscopy measurements is described. Using the scanning tunneling microscope (STM) tip as a field emission (FE) electron source in conjunction with this analyzer, which is placed at a glancing angle to the surface plane, FE sample current and electron reflectivity imaging may be performed simultaneously. This is demonstrated in measurements of Ag nanostructures prepared on graphite by electron-beam lithography, where a material contrast of 13% is observed, with a lateral resolution of 25 nm, between the silver and graphite in electron reflectivity images. Topological contrast mechanisms such as edge enhancement and shadowing are also observed, giving rise to additional features in the electron reflectivity images. The same instrument configuration has been used to measure electron energy loss spectra on bare graphite, where the zero loss peak, π band plasmon loss peak and secondary electron peaks are observed. Using this simple and compact analyzer an STM, with sufficient open access to the tip-sample junction, may easily be augmented to provide simultaneous elemental and topographic mapping, supplementing STM image measurements with FE sample current and electron reflectivity images, as well as electron energy loss spectroscopy measurements, in the same instrument.

  13. Dependence of the Population on the Temperature in the Boltzmann Distribution: A Simple Relation Involving the Average Energy

    Science.gov (United States)

    Angeli, Celestino; Cimiraglia, Renzo; Dallo, Federico; Guareschi, Riccardo; Tenti, Lorenzo

    2013-01-01

    The dependence on the temperature of the population of the "i"th state, "P"[subscript "i"], in the Boltzmann distribution is analyzed by studying its derivative with respect to the temperature, "T." A simple expression is found, involving "P"[subscript "i"], the energy of the state,…

  14. New Free Electron Wire for Loss Free Utilization of Electrical Energy and Highly Energy Efficient Electrical Appliances

    Directory of Open Access Journals (Sweden)

    Sabyasachi Haldar

    2014-07-01

    Full Text Available New Free Electrons Wire will enable the use of electrical energy and also energy in various other forms, in a loss free way, at room temperature. Free Electrons confined in vacuum at the order of 10-4 torr or more, at the core of the wire, can move a distance as long as about, to a few kilometers without any collision. The vacuum is maintained in a tube made up of alternate layers of Teflon and Silicon Oxynitride. The columbic repulsion between these free electrons will actually conduct energy without any loss. The free electrons trapped in vacuum tube, should be at a particular density of around 2.02 x 108 electrons per unit area. A metal encapsulation(s over the wire is there to keep the electromagnetic field remain confined within the free electron wire, to make it harmless to the health of living creatures. Apart from loss free energy transportation, the free electron wire is also capable of generating very high electromagnetic field due to the free electrons, simply by removing the metal encapsulation(s, which can be used for various purposes. The materials and techniques adopted will make New Free Electron Wire producible commercially, at the cost of general copper wires.

  15. Competing Effects Of Electronic And Nuclear Energy Loss On Microstructural Evolution In Ionic-covalent Materials

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanwen [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Varga, Tamas [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Ishimaru, Manabu [Department of Materials Science and Engineering, Kyushu Inst. of Technology, Fukuoka (Japan); Edmondson, P. D. [Univ. of Oxford, (United Kingdom). Dept. of Materials; Xue, H. [Univ. of Tennessee, Knoxville, TN (United States); Liu, Peng [Univ. of Tennessee, Knoxville, TN (United States); School of Physics, Key Laboratory of Particle Physics and Particle Irradiation, Shandong Univ., Jinan (China); Moll, Sandra [TN International/AREVA, Montigny Le Bretonneux (France); Namavar, Fereydoon [Univ. of Nebraska Medical Center, Omaha, NE (United States); Hardiman, Christopher M. [North Carolina State Univ. (United States). Dept. of Nuclear Engineering; Shannon, Steven [North Carolina State Univ. (United States). Dept. of Nuclear Engineering; Weber, William J. [Univ. of Tennessee, Knoxville, TN (United States); Oak Ridge National Lab., Oak Ridge, TN (United States)

    2014-05-01

    Ever increasing energy needs have raised the demands for advanced fuels and cladding materials that withstand the extreme radiation environments with improved accident tolerance over a long period of time. Ceria (CeO2) is a well known ionic conductor that is isostructural with urania and plutonia-based nuclear fuels. In the context of nuclear fuels, immobilization and transmutation of actinides, CeO2 is a model system for radiation effect studies. Covalent silicon carbide (SiC) is a candidate for use as structural material in fusion, cladding material for fission reactors, and an inert matrix for the transmutation of plutonium and other radioactive actinides. Understanding microstructural change of these ionic-covalent materials to irradiation is important for advanced nuclear energy systems. While displacements from nuclear energy loss may be the primary contribution to damage accumulation in a crystalline matrix and a driving force for the grain boundary evolution in nanostructured materials, local non-equilibrium disorder and excitation through electronic While displacements from nuclear energy loss may be the primary contribution to damage accumulation in a crystalline matrix and a driving force for the grain boundary evolution in nanostructured materials, local non-equilibrium disorder and excitation through electronic energy loss may, however, produce additional damage or anneal pre-existing defect. At intermediate transit energies where electronic and nuclear energy losses are both significant, synergistic, additive or competitive processes may evolve that affect the dynamic response of materials to irradiation. The response of crystalline and nanostructured CeO2 and SiC to ion irradiation are studied under different nuclear and electronic stopping powers to describe some general material response in this transit energy regime. Although fast radiation-induced grain growth in CeO2 is evident with no phase transformation, different fluence and dose dependence

  16. Nanoscale mapping of optical band gaps using monochromated electron energy loss spectroscopy

    Science.gov (United States)

    Zhan, W.; Granerød, C. S.; Venkatachalapathy, V.; Johansen, K. M. H.; Jensen, I. J. T.; Kuznetsov, A. Yu; Prytz, Ø.

    2017-03-01

    Using monochromated electron energy loss spectroscopy in a probe-corrected scanning transmission electron microscope we demonstrate band gap mapping in ZnO/ZnCdO thin films with a spatial resolution below 10 nm and spectral precision of 20 meV.

  17. Bandgap determination of P(VDF–TrFE) copolymer film by electron energy loss spectroscopy

    Indian Academy of Sciences (India)

    Dipankar Mandal; K Henkel; K Müller; D Schmeißer

    2010-08-01

    The ferroelectric of poly(vinylidene fluoride trifluoroethylene), P(VDF–TrFE) is confirmed for 100 nm thickness spin coated copolymer film. The homogeneous coverage of the copolymer film is investigated by the help of X-ray photoelectron spectroscopy (XPS). Most importantly, the existing bandgap in the crystalline phase of the copolymer is determined directly from the electron energy loss spectroscopy (EELS).

  18. Loss of energy dissipation capacity from the deadzone in linear and nonlinear viscous damping devices

    Institute of Scientific and Technical Information of China (English)

    Mai Tong; Thomas Liebner

    2007-01-01

    In a viscous damping device under cyclic loading, after the piston reaches a peak stroke, the reserve movement that follows may sometimes experience a short period of delayed or significantly reduced device force output. A similar delay or reduced device force output may also occur at the damper's initial stroke as it moves away from its neutral position.This phenomenon is referred to as the effect of "deadzone". The deadzone can cause a loss of energy dissipation capacity and less efficient vibration control. It is prominent in small amplitude vibrations. Although there are many potential causes of deadzone such as environmental factors, construction, material aging, and manufacture quality, in this paper, its general effect in linear and nonlinear viscous damping devices is analyzed. Based on classical dynamics and damping theory, a simple model is developed to capture the effect of deadzone in terms of the loss of energy dissipation capacity. The model provides several methods to estimate the loss of energy dissipation within the deadzone in linear and sublinear viscous fluid dampers.An empirical equation of loss of energy dissipation capacity versus deadzone size is formulated, and the equivalent reduction of effective damping in SDOF systems has been obtained. A laboratory experimental evaluation is carried out to verify the effect of deadzone and its numerical approximation. Based on the analysis, a modification is suggested to the corresponding formulas in FEMA 356 for calculation of equivalent damping ifa deadzone is to be considered.

  19. Mapping boron in silicon solar cells using electron energy-loss spectroscopy

    DEFF Research Database (Denmark)

    Duchamp, Martial; Boothroyd, Chris; Kovács, András

    2011-01-01

    Electron energy-loss spectroscopy (EELS) is used to study the B distribution in a p-i-n layered solar cell structure. The boron concentration in the p-doped Si layer is expected to be ~1021 cm−3 and should not exceed 1017 cm−3 in the neighbouring intrinsic layer. We show that B concentrations...

  20. Fast-ion Energy Loss During TAE Avalanches in the National Spherical Torus Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Fredrickson, E D; Darrow, D S; Gorelenkov, N N; Kramer, G J; Kubota, S; Podesta, M; White, R B; Bortolon, A; Gerhardt, S P; Bell, R E; Diallo, A; LeBlanc, B; Levinton, F M

    2012-07-11

    Strong TAE avalanches on NSTX, the National Spherical Torus Experiment [M. Ono, et al., Nucl. Fusion 40 (2000) 557] are typically correlated with drops in the neutron rate in the range of 5% - 15%. In previous studies of avalanches in L-mode plasmas, these neutron drops were found to be consistent with modeled losses of fast ions. Here we expand the study to TAE avalanches in NSTX H-mode plasmas with improved analysis techniques. At the measured TAE mode amplitudes, simulations with the ORBIT code predict that fast ion losses are negligible. However, the simulations predict that the TAE scatter the fast ions in energy, resulting in a small (≈ 6%) drop in fast ion β. The net decrease in energy of the fast ions is sufficient to account for the bulk of the drop in neutron rate, even in the absence of fast ion losses. This loss of energy from the fast ion population is comparable to the estimated energy lost by damping from the Alfven wave during the burst. The previously studied TAE avalanches in L-mode are re-evaluated using an improved calculation of the potential fluctuations in the ORBIT code.

  1. Energy loss caused by shielding effect of steel cage outside source tube

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The energy loss, produced by shielding effect of steel cage outside the source tube, is quite considerable.With PENELOPE software package, MC results have been obtained based on the simulation of different source conformations. The result illustrates that the naked source tubes can improve the utilization ratio of the cobalt facilities. It demonstrates the applied value of the naked source tube in engineering.

  2. DETERMINATION OF HEAT LOSS FACTOR OF SOLAR ENERGY COLLECTOR WITH THE ABSORBER MADE FROM POLYMERIC PIPES

    Directory of Open Access Journals (Sweden)

    Ermuratskii V.

    2009-12-01

    Full Text Available It is studied thermal loss factor of solar energy collector, which absorber represents the register made from polymeric pipes. Input data are results of tests in non-stationary thermal regime at the zero water flow rate and the minimum sunlight.

  3. A Bench Measurement of the Energy Loss of a Stored Beam to a Cavity

    Energy Technology Data Exchange (ETDEWEB)

    Sands, M; Rees, J.; /SLAC

    2016-12-19

    A rather simple electronic bench experiment is proposed for obtaining a measure of the impulse energy loss of a stored particle bunch to an rf cavity or other vacuum-chamber structure--the so-called "cavity radiation". The proposed method is analyzed in some detail.

  4. A Bench Measurement of the Energy Loss of a Stored Beam to a Cavity

    Energy Technology Data Exchange (ETDEWEB)

    Sands, M.; Rees, John R.; /SLAC

    2005-08-08

    A rather simple electronic bench experiment is proposed for obtaining a measure of the impulse energy loss of a stored particle bunch to an rf cavity or other vacuum-chamber structure--the so-called ''cavity radiation''. The proposed method is analyzed in some detail.

  5. Where do the main losses of energy resources occur - at the point of consumption or at the point of production?

    Energy Technology Data Exchange (ETDEWEB)

    Moskalenko, Alexander

    2010-09-15

    This is an opinion of an independent consultant about key sources of energy losses. It differentiates from the one commonly accepted. The main loser of energy is an energy sector - producers of energy and the distribution networks, responsible for transporting of energy, not the housing and the transportation sector. This opinion is based on the GCE Group's experience. The author proposes to focus the work to reduce energy losses on increasing the energy efficiency of energy sector, not on the end consumer. This will allow to reduce the cost of energy unit production and to reduce greenhouse gas emissions.

  6. High-energy irradiation and mass loss rates of hot Jupiters in the solar neighborhood

    CERN Document Server

    Salz, M; Czesla, S; Schmitt, J H M M

    2015-01-01

    Giant gas planets in close proximity to their host stars experience strong irradiation. In extreme cases photoevaporation causes a transonic, planetary wind and the persistent mass loss can possibly affect the planetary evolution. We have identified nine hot Jupiter systems in the vicinity of the Sun, in which expanded planetary atmospheres should be detectable through Lyman alpha transit spectroscopy according to predictions. We use X-ray observations with Chandra and XMM-Newton of seven of these targets to derive the high-energy irradiation level of the planetary atmospheres and the resulting mass loss rates. We further derive improved Lyman alpha luminosity estimates for the host stars including interstellar absorption. According to our estimates WASP-80 b, WASP-77 b, and WASP-43 b experience the strongest mass loss rates, exceeding the mass loss rate of HD 209458 b, where an expanded atmosphere has been confirmed. Furthermore, seven out of nine targets might be amenable to Lyman alpha transit spectroscopy...

  7. Point-by-Point model description of average prompt neutron data as a function of total kinetic energy of fission fragments

    Science.gov (United States)

    Tudora, A.

    2013-03-01

    The experimental data of average prompt neutron multiplicity as a function of total kinetic energy of fragments (TKE) exhibit, especially in the case of 252Cf(SF), different slopes dTKE/dν and different behaviours at low TKE values. The Point-by-Point (PbP) model can describe these different behaviours. The higher slope dTKE/dν and the flattening of at low TKE exhibited by a part of experimental data sets is very well reproduced when the PbP multi-parametric matrix ν(A,TKE) is averaged over a double distribution Y(A,TKE). The lower slope and the almost linear behaviour over the entire TKE range exhibited by other data sets is well described when the same matrix ν(A,TKE) is averaged over a single distribution Y(A). In the case of average prompt neutron energy in SCM as a function of TKE, different dTKE/dɛ slopes are also obtained by averaging the same PbP matrix ɛ(A,TKE) over Y(A,TKE) and over Y(A). The results are exemplified for three fissioning systems benefiting of experimental data as a function of TKE: 252Cf(SF), 235U(nth,f) and 239Pu(nth,f). In the case of 234U(n,f) for the first time it was possible to calculate (TKE) and (TKE) at many incident energies by averaging the PbP multi-parametric matrices over the experimental Y(A,TKE) distributions recently measured at IRMM for 14 incident energies in the range 0.3-5 MeV. The results revealed that the slope dTKE/dν does not vary with the incident energy and the flattening of at low TKE values is more pronounced at low incident energies. The average model parameters dependences on TKE resulted from the PbP treatment allow the use of the most probable fragmentation approach, having the great advantage to provide results at many TKE values in a very short computing time compared to PbP and Monte Carlo treatments.

  8. Estimates of area-averaged turbulent energy fluxes in a convectively driven boundary layer using aircraft measurements

    Science.gov (United States)

    Scherf, A.; Roth, R.

    1996-12-01

    During the field campaign of EFEDA II several aircraft measurements were performed in order to evaluate area mean values of turbulent energy fluxes over a relatively flat terrain in a desertification threatened area in Spain. Since earlier field experiments indicated differences between airborne measurements and surface observations, we tried to close the gap by carefully analysing the turbulence measurements. In order to evaluate the influence of the temporal variation of the convective boundary layer, the rise of the inversion, derived from simultaneously performed radiosonde ascents, was taken into account. By estimating the linear approximated fields of the meteorological parameters, it was possible to calculate the mean values of these quantities as well as the temporal and spatial derivatives, which are necessary for the evaluation of the advective terms of the energy budget. In this way is possible to examine the terms of the conservation equations in a supplementary way.

  9. Geometrical Scaling and the Dependence of the Average Transverse Momentum on the Multiplicity and Energy for the ALICE Experiment

    CERN Document Server

    McLerran, Larry

    2014-01-01

    We review the recent ALICE data on charged particle multiplicity in p-p collisions, and show that it exhibits Geometrical Scaling (GS) with energy dependence given with characteristic exponent $\\lambda=0.22$. Next, starting from the GS hypothesis and using results of the Color Glass Condensate effective theory, we calculate $\\left\\langle p_{\\text{T}}\\right\\rangle$ as a function $N_{\\rm ch}$ including dependence on the scattering energy $W$. We show that $\\left\\langle p_{\\text{T}}\\right\\rangle$ both in p-p and p-Pb collisions scales in terms of scaling variable $(W/W_{0})^{\\lambda/(2+\\lambda)}% \\sqrt{N_{\\mathrm{ch}}/S_{\\bot}}$ where $S_{\\bot}$ is multiplicity dependent interaction area in the transverse plane. Furthermore, we discuss how the behavior of the interaction radius $R$ at large multiplicities affects the mean $p_{\\mathrm{T}}$ dependence on $N_{\\rm ch}$, and make a prediction that $\\left\\langle p_{\\text{T}}\\right\\rangle$ at high multiplicity should reach an energy independent limit.

  10. Uranium and Plutonium Average Prompt-fission Neutron Energy Spectra (PFNS) from the Analysis of NTS NUEX Data

    Science.gov (United States)

    Lestone, J. P.; Shores, E. F.

    2014-05-01

    In neutron experiments (NUEX) conducted at the Nevada Test Site (NTS) by Los Alamos National Laboratory, the time-of-flight of fission-neutrons emitted from nuclear tests were observed by measuring the current generated by the collection of protons scattered from a thin CH2 foil many meters from the nuclear device into a Faraday cup. The time dependence of the Faraday cup current is a measure of the energy spectrum of the neutrons that leak from the device. With good device models and accurate neutron-transport codes, the leakage spectra can be converted into prompt fast-neutron-induced fission-neutron energy spectra. This has been done for two events containing plutonium, and for an earlier event containing uranium. The prompt-fission neutron spectra have been inferred for 1.5-MeV 239Pu(n,f) and 235U(n,f) reactions for outgoing neutron energies from 1.5 to ∼10.5 MeV, in 1-MeV steps. These spectra are in good agreement with the Los Alamos fission model.

  11. Modelling moisture content and dry matter loss during storage of logging residues for energy

    Energy Technology Data Exchange (ETDEWEB)

    Filbakk, Tore; Hoeiboe, Olav Albert (Dept. of Ecology and Natural Resource Management, Norwegian Univ. of Life Sciences, Aas (Norway)); Dibdiakova, Janka (Norwegian Forest and Landscape Inst., Aas (Norway)); Nurmi, Juha (Finnish Forest Research Inst., Kannus (Finland))

    2011-04-15

    To achieve optimal utilisation of logging residues for energy, it is important to know how different handling and storage methods affect fuel properties. The aim of this study was to model how the moisture content and dry matter losses of logging residues develop during storage. Logging residues were collected from five different stands of spruce and pine during different seasons of the year and stored in the same location. The logging residues were stored in covered piles of bundled residues and loose residues. Only minor differences were found in the moisture content profiles between piles of bundles and loose residues. Logging residues located in the centre of both types of piles had considerably lower moisture content than the outer parts. The moisture content significantly affected dry matter loss, with the highest dry matter losses being found in the samples with the least favourable drying conditions. The dry matter losses varied between 1 and 3% per month. Significantly higher dry matter losses were found in the spruce bundles than in the pine bundles. Seasoned logging residues had the lowest dry matter loss, while the logging residues harvested and piled in the autumn had the highest loss

  12. Energy losses in mixed matrix superconducting wires under fast pulsed conditions

    Energy Technology Data Exchange (ETDEWEB)

    Wollan, J.J.

    1976-08-17

    Energy losses have been measured on a set of mixed matrix (CuNi, Cu, NbTi) superconducting wires at B's up to 1.5 x 10/sup 7/ G/s. The losses have been measured as a function of wire diameter, twist pitch, maximum applied field, and B. Both static and dynamic losses were measured for a field applied perpendicularly to the wire axis. The dynamic losses were measured by slowly applying an external field to a sample and then causing the field to decay exponentially in roughly 1 ms to 10 ms. Under low B (9 kG) and B (10/sup 6/ G/s) conditions the hysteretic loss dominated. At high B (21 kG) and B (1.5 x 10/sup 7/ G/s) the matrix losses became dominant. The systematic variation of the losses with the mentioned parameters will be presented and will be compared to theoretical predictions.

  13. IMPLICATIONS OF MASS AND ENERGY LOSS DUE TO CORONAL MASS EJECTIONS ON MAGNETICALLY ACTIVE STARS

    Energy Technology Data Exchange (ETDEWEB)

    Drake, Jeremy J.; Cohen, Ofer [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Yashiro, Seiji [Interferometrics Inc., Herndon, VA 20171 (United States); Gopalswamy, Nat, E-mail: jdrake@cfa.harvard.edu [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2013-02-20

    Analysis of a database of solar coronal mass ejections (CMEs) and associated flares over the period 1996-2007 finds well-behaved power-law relationships between the 1-8 A flare X-ray fluence and CME mass and kinetic energy. We extrapolate these relationships to lower and higher flare energies to estimate the mass and energy loss due to CMEs from stellar coronae, assuming that the observed X-ray emission of the latter is dominated by flares with a frequency as a function of energy dn/dE = kE {sup -{alpha}}. For solar-like stars at saturated levels of X-ray activity, the implied losses depend fairly weakly on the assumed value of {alpha} and are very large: M-dot {approx}5 Multiplication-Sign 10{sup -10} M{sub sun} yr{sup -1} and E-dot {approx}0.1 L{sub sun}. In order to avoid such large energy requirements, either the relationships between CME mass and speed and flare energy must flatten for X-ray fluence {approx}> 10{sup 31} erg, or the flare-CME association must drop significantly below 1 for more energetic events. If active coronae are dominated by flares, then the total coronal energy budget is likely to be up to an order of magnitude larger than the canonical 10{sup -3} L {sub bol} X-ray saturation threshold. This raises the question of what is the maximum energy a magnetic dynamo can extract from a star? For an energy budget of 1% of L {sub bol}, the CME mass loss rate is about 5 Multiplication-Sign 10{sup -11} M {sub Sun} yr{sup -1}.

  14. Jet suppression and the flavor dependence of partonic energy loss with ATLAS

    CERN Document Server

    Kosek, Tomas; The ATLAS collaboration

    2015-01-01

    In relativistic heavy ion collisions, a hot medium with a high density of unscreened color charges is produced. One manifestation of the energy loss of jets propagating through the medium is a lower yield of jets emerging from the medium than 
expected in the absence of medium effects. Therefore modifications of the jet yield are directly sensitive to the energy loss mechanism. Furthermore, jets with different 
flavor content are expected to be affected by the medium in different ways. Parton showers initiated by quarks tend to have fewer fragments carrying a larger fraction of 
the total jet energy than those resulting from gluons. Jets containing heavy quarks may lose less energy as the large quark mass suppresses the amount of medium-induced 
radiation. This would lead to different relative contributions of inelastic and elastic energy loss. In this talk, the latest ATLAS results on single jet suppression will 
be presented. Measurements of the nuclear modification factor, RAA, for fully reconstr...

  15. Jet energy loss and bulk parton collectivity in nucleus-nucleus collisions at RHIC

    Institute of Scientific and Technical Information of China (English)

    HUANG Huan-Zhong

    2009-01-01

    Nucleus-nucleus collisions at RHIC produce high temperature and high energy density matter which exhibits paxtonic degrees of freedom. We will discuss measurements of nuclear modification factors for light hadrons and non-photonic electrons from heavy quark decays, which reflect the flavor dependence of energy loss of high momentum partons traversing the dense QCD medium. The dense QCD medium responds to energy loss of high momentum patrons in a pattern consistent with that expected from a hydrodynamic fluid. The hadronization of bulk partonic matter exhibits collectivity with effective partonic degrees of freedom. Nuclear collisions at RHIC provide an intriguing environment, where many constituent quark ingredients are readily available for possible formation of exotic particles through quark coalescence or recombinations.

  16. Energy reduction in buildings in temperate and tropic regions utilizing a heat loss measuring device

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt

    2012-01-01

    to ACMV in the "warm countries" contribute to an enormous energy consumption and corresponding CO2 emission. In order to establish the best basis for energy renovation, it is important to have measures of the heat losses on a building façade, for optimizing the energy renovation. This paper will present...... penetration through facades with the aim to reduce the costs to AC. The paper will introduce a common project between NUS (National University of Singapore), AAU (Aalborg University) and HT-Meter, the latter as the U-value Meter developer company. In the project we will measure the heat transfer in the unit W...... of the project. Furthermore this paper present results from already conducted heat loss measurements in the temperate regions....

  17. Prognostic impact of average iodine density assessed by dual-energy spectral imaging for predicting lung tumor recurrence after stereotactic body radiotherapy.

    Science.gov (United States)

    Aoki, Masahiko; Hirose, Katsumi; Sato, Mariko; Akimoto, Hiroyoshi; Kawaguchi, Hideo; Hatayama, Yoshiomi; Fujioka, Ichitaro; Tanaka, Mitsuki; Ono, Shuichi; Takai, Yoshihiro

    2016-07-01

    The purpose of this study was to investigate the prognostic significance of average iodine density as assessed by dual-energy computed tomography (DE-CT) for lung tumors treated with stereotactic body radiotherapy (SBRT). From March 2011 to August 2014, 93 medically inoperable patients with 74 primary lung cancers and 19 lung metastases underwent DE-CT prior to SBRT of a total dose of 45-60 Gy in 5-10 fractions. Of these 93 patients, nine patients had two lung tumors. Thus, 102 lung tumors were included in this study. DE-CT was performed for pretreatment evaluation. Regions of interest were set for the entire tumor, and average iodine density was obtained using a dedicated imaging software and evaluated with regard to local control. The median follow-up period was 23.4 months (range, 1.5-54.5 months). The median value of the average iodine density was 1.86 mg/cm(3) (range, 0.40-9.27 mg/cm(3)). Two-year local control rates for the high and low average iodine density groups divided by the median value of the average iodine density were 96.9% and 75.7% (P = 0.006), respectively. Tumors with lower average iodine density showed a worse prognosis, possibly reflecting a hypoxic cell population in the tumor. The average iodine density exhibited a significant impact on local control. Our preliminary results indicate that iodine density evaluated using dual-energy spectral CT may be a useful, noninvasive and quantitative assessment of radio-resistance caused by presumably hypoxic cell populations in tumors.

  18. Tunable negligible-loss energy transfer between dipolar-coupled magnetic disks by stimulated vortex gyration.

    Science.gov (United States)

    Jung, Hyunsung; Lee, Ki-Suk; Jeong, Dae-Eun; Choi, Youn-Seok; Yu, Young-Sang; Han, Dong-Soo; Vogel, Andreas; Bocklage, Lars; Meier, Guido; Im, Mi-Young; Fischer, Peter; Kim, Sang-Koog

    2011-01-01

    A wide variety of coupled harmonic oscillators exist in nature. Coupling between different oscillators allows for the possibility of mutual energy transfer between them and the information-signal propagation. Low-energy input signals and their transport with negligible energy loss are the key technological factors in the design of information-signal processing devices. Here, utilizing the concept of coupled oscillators, we experimentally demonstrated a robust new mechanism for energy transfer between spatially separated dipolar-coupled magnetic disks - stimulated vortex gyration. Direct experimental evidence was obtained by a state-of-the-art experimental time-resolved soft X-ray microscopy probe. The rate of energy transfer from one disk to the other was deduced from the two normal modes' frequency splitting caused by dipolar interaction. This mechanism provides the advantages of tunable energy transfer rates, low-power input signals and negligible energy loss in the case of negligible intrinsic damping. Coupled vortex-state disks might be implemented in applications for information-signal processing.

  19. A low-loss hybrid rectification technique for piezoelectric energy harvesting

    Science.gov (United States)

    Schlichting, A. D.; Fink, E.; Garcia, E.

    2013-09-01

    Embedded systems have decreased in size and increased in capability; however, small-scale energy storage technologies still significantly limit these advances. Energy neutral operation using small-scale energy harvesting technologies would allow for longer device operation times and smaller energy storage masses. Vibration energy harvesting is an attractive method due to the prevalence of energy sources in many environments. Losses in efficiency due to AC-DC rectification and conditioning circuits limit its application. This work presents a low-loss hybrid rectification technique for piezoelectric vibration energy harvesting using magnetically actuated reed switches and a passive semiconductor full-bridge rectifier. This method shows the capability to have higher efficiency levels and the rectification of low-voltage harvesters without the need for active electrical components. A theoretical model shows that the hybrid rectification technique performance is highly dependent on the proximity delay and the hysteresis behavior of the reed switches. Experimental results validate the model and support the hypothesis of increased performance using the hybrid rectification technique.

  20. Quantitative nanoscale water mapping in frozen-hydrated skin by low-loss electron energy-loss spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Yakovlev, Sergey [Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, NJ 07030 (United States); Misra, Manoj; Shi, Shanling [Unilever Research and Development, Trumbull, CT 06611 (United States); Firlar, Emre [Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, NJ 07030 (United States); Libera, Matthew, E-mail: mlibera@stevens.edu [Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, NJ 07030 (United States)

    2010-06-15

    Spatially resolved low-loss electron energy-loss spectroscopy (EELS) is a powerful method to quantitatively determine the water distribution in frozen-hydrated biological materials at high spatial resolution. However, hydrated tissue, particularly its hydrophilic protein-rich component, is very sensitive to electron radiation. This sensitivity has traditionally limited the achievable spatial resolution because of the relatively high noise associated with low-dose data acquisition. We show that the damage caused by high-dose data acquisition affects the accuracy of a multiple-least-squares (MLS) compositional analysis because of inaccuracies in the reference spectrum used to represent the protein. Higher spatial resolution combined with more accurate compositional analysis can be achieved if a reference spectrum is used that better represents the electron-beam-damaged protein component under frozen-hydrated conditions rather than one separately collected from dry protein under low-dose conditions. We thus introduce a method to extract the best-fitting protein reference spectrum from an experimental spectrum dataset. This method can be used when the MLS-fitting problem is sufficiently constrained so that the only unknown is the reference spectrum for the protein component. We apply this approach to map the distribution of water in cryo-sections obtained from frozen-hydrated tissue of porcine skin. The raw spectral data were collected at doses up to 10{sup 5} e/nm{sup 2} despite the fact that observable damage begins at doses as low as 10{sup 3} e/nm{sup 2}. The resulting spatial resolution of 10 nm is 5-10 times better than that in previous studies of frozen-hydrated tissue and is sufficient to resolve sub-cellular water fluctuations as well as the inter-cellular lipid-rich regions of skin where water-mediated processes are believed to play a significant role in the phenotype of keratinocytes in the stratum corneum.

  1. Updated analytical solutions of continuity equation for electron beams precipitation - II. Mixed energy losses

    Science.gov (United States)

    Zharkova, V. V.; Dobranskis, R. R.

    2016-06-01

    In this paper we consider simultaneous analytical solutions of continuity equations for electron beam precipitation (a) in collisional losses and (b) in ohmic losses, or mixed energy losses (MEL) by applying the iterative method to calculate the resulting differential densities at given precipitation depth. The differential densities of precipitating electrons derived from the analytical solutions for MELs reveal increased flattening at energies below 10-30 keV compared to a pure collisional case. This flattening becomes stronger with an increasing precipitation depth turning into a positive slope at greater precipitation depths in the chromosphere resulting in a differential density distribution with maximum that shifts towards higher energies with increase in column depth, while the differential densities combining precipitating and returning electrons are higher at lower energies than those for a pure collisional case. The resulting hard X-ray (HXR) emission produced by the beams with different initial energy fluxes and spectral indices is calculated using the MEL approach for different ratios between the differential densities of precipitating and returning electrons. The number of returning electrons can be even further enhanced by a magnetic mirroring, not considered in the present model, while dominating at lower atmospheric depths where the magnetic convergence and magnitude are the highest. The proposed MEL approach provides an opportunity to account simultaneously for both collisional and ohmic losses in flaring events, which can be used for a quick spectral fitting of HXR spectra and evaluation of a fraction of returning electrons versus precipitating ones. The semi-analytical MEL approach is used for spectral fitting to Reuven High Energy Solar Spectroscopic Imager observations of nine C, M and X class flares revealing a close fit to the observations and good resemblance to numerical FP solutions.

  2. Radiation and ionization energy loss simulation for the GDH sum rule experiment in Hall-A at Jefferson Lab

    Institute of Scientific and Technical Information of China (English)

    YAN Xin-Hu; YE Yun-Xiu; CHEN Jian-Ping; LU Hai-Jiang; ZHU Peng-Jia; JIANG Feng-Jian

    2015-01-01

    The radiation and ionization energy loss are presented for single arm Monte Carlo simulation for the GDH sum rule experiment in Hall-A at the Jefferson Lab.Radiation and ionization energy loss are discussed for 12C elastic scattering simulation.The relative momentum ratio-Ap and 12C elastic cross section are compared without and with radiative energy loss and a reasonable shape is obtained by the simulation.The total energy loss distribution is obtained,showing a Landau shape for 12C elastic scattering.This simulation work will give good support for radiation correction analysis of the GDH sum rule experiment.

  3. Varying protein source and quantity do not significantly improve weight loss, fat loss, or satiety in reduced energy diets among midlife adults.

    Science.gov (United States)

    Aldrich, Noel D; Reicks, Marla M; Sibley, Shalamar D; Redmon, J Bruce; Thomas, William; Raatz, Susan K

    2011-02-01

    We hypothesized that a whey protein diet would result in greater weight loss and improved body composition compared with standard weight loss diets. Weight change, body composition, and renin-angiotensin aldosterone system activity in midlife adults were compared between diet groups. Eighteen subjects enrolled in a 5-month study of 8-week controlled food intake followed by 12-weeks ad libitum intake. Subjects were randomized to 1 of 3 treatment groups: control diet (CD) (55% carbohydrate/15% protein/30% fat), mixed protein (40% carbohydrate/30% protein/30% fat), or whey protein (WP) (40% carbohydrate/15% mixed protein/15% whey protein/30% fat). Measurements included weight, metabolic measures, body composition by dual-energy x-ray absorptiometry, and resting energy expenditure. No statistically significant differences in total weight loss or total fat loss were observed between treatments; however, a trend toward greater total weight loss (P = .08) and total fat loss (P = .09) was observed in the WP group compared with the CD group. Fat loss in the leg and gynoid regions was greater (P loss or in total fat loss, but significant differences in regional fat loss and in decreased blood pressure were observed in the WP group. Copyright © 2011 Elsevier Inc. All rights reserved.

  4. Energy Level Tuning of Poly(phenylene-alt-dithienobenzothiadiazole)s for Low Photon Energy Loss Solar Cells.

    Science.gov (United States)

    Heuvel, Ruurd; van Franeker, Jacobus J; Janssen, René A J

    2017-03-01

    Six poly(phenylene-alt-dithienobenzothiadiazole)-based polymers have been synthesized for application in polymer-fullerene solar cells. Hydrogen, fluorine, or nitrile substitution on benzo-thiadiazole and alkoxy or ester substitution on the phenylene moiety are investigated to reduce the energy loss per converted photon. Power conversion efficiencies (PCEs) up to 6.6% have been obtained. The best performance is found for the polymer-fullerene combination with distinct phase separation and crystalline domains. This improves the maximum external quantum efficiency for charge formation and collection to 66%. The resulting higher photocurrent compensates for the relatively large energy loss per photon (Eloss = 0.97 eV) in achieving a high PCE. By contrast, the poly-mer that provides a reduced energy loss (Eloss = 0.49 eV) gives a lower photocurrent and a reduced PCE of 1.8% because the external quantum efficiency of 17% is limited by a suboptimal morphology and a reduced driving force for charge transfer.

  5. Charge-state-dependent energy loss of slow ions. I. Experimental results on the transmission of highly charged ions

    Science.gov (United States)

    Wilhelm, Richard A.; Gruber, Elisabeth; Smejkal, Valerie; Facsko, Stefan; Aumayr, Friedrich

    2016-05-01

    We report on energy loss measurements of slow (v ≪v0 ), highly charged (Q >10 ) ions upon transmission through a 1-nm-thick carbon nanomembrane. We emphasize here the scaling of the energy loss with the velocity and charge exchange or loss. We show that a weak linear velocity dependence exists, whereas charge exchange dominates the kinetic energy loss, especially in the case of a large charge capture. A universal scaling of the energy loss with the charge exchange and velocity is found and discussed in this paper. A model for charge-state-dependent energy loss for slow ions is presented in paper II in this series [R. A. Wilhelm and W. Möller, Phys. Rev. A 93, 052709 (2016), 10.1103/PhysRevA.93.052709].

  6. Determination of the fission-neutron averaged cross sections of some high-energy threshold reactions of interest for reactor dosimetry

    CERN Document Server

    Arribere, M A; Ribeiro-Guevara, S; Korochinsky, S; Blostein, J J

    2003-01-01

    For three high threshold reactions, we have measured the cross sections averaged over a sup 2 sup 3 sup 5 U fission neutron spectrum. The measured reactions, and corresponding averaged cross sections found, are: sup 1 sup 2 sup 7 I(n,2n) sup 1 sup 2 sup 6 I, (1.36+-0.12) mb; sup 9 sup 0 Zr(n,2n) sup 8 sup 9 sup m Zr, (13.86+-0.83) mu b; and sup 5 sup 8 Ni(n,d+np+pn) sup 5 sup 7 Co, (274+-15) mu b; all referred to the well known standard of (111+-3) mb for the sup 5 sup 8 Ni(n,p) sup 5 sup 8 sup m sup + sup g Co averaged cross section. The measured cross sections are of interest in nuclear engineering for the characterization of the fast neutron component in the energy distribution of reactor neutrons. (author)

  7. Flavors in the Soup: An Overview of Heavy-Flavored Jet Energy Loss at CMS

    CERN Document Server

    Jung, Kurt

    2016-01-01

    Kurt E. Jung PhD, Purdue University, May 2016. Flavors in the Soup: An Overviewof Heavy-Flavored Jet Energy Loss at CMS. Major Professor: Wei Xie.The energy loss of jets in heavy-ion collisions is expected to depend on the flavorof the fragmenting parton. Thus, measurements of jet quenching as a function offlavor place powerful constraints on the thermodynamical and transport propertiesof the hot and dense medium. Measurements of the nuclear modification factorsof the heavy flavor tagged jets from charm and bottom quarks in both PbPb andpPb collisions can quantify such energy loss e↵ects. Specifically, pPb measurementsprovide crucial insights into the behavior of the cold nuclear matter e↵ect, whichis required to fully understand the hot and dense medium e↵ects on jets in PbPbcollisions. This dissertation presents the energy modification of b-jets in PbPb atppsN N = 2.76 TeV and pPb collisions at sN N = 5.02 TeV, along with the first everpmeasurements of charm jets in pPb collisions at sN N = 5.0...

  8. Dynamical energy loss as a novel Quark-Gluon Plasma tomographic tool

    Science.gov (United States)

    Djordjevic, Magdalena

    2016-12-01

    High momentum suppression of light and heavy flavor observables is considered to be an excellent probe of jet-medium interactions in QCD matter created at RHIC and LHC. Utilizing this tool requires accurate suppression predictions for different experiments, probes and experimental conditions, and their unbiased comparison with experimental data. With this goal, we developed the dynamical energy loss formalism towards generating predictions for non-central collisions; the formalism takes into account both radiative and collisional energy loss computed within the same theoretical framework, dynamical (as opposed to static) scattering centers, finite magnetic mass, running coupling and uses no free parameters in comparison with experimental data. Within this formalism, we provided predictions, and a systematic comparison with experimental data, for a diverse set of suppression data: all available light and heavy flavor probes, lower and high momentum ranges, various centrality ranges and various collision energies at RHIC and LHC. We here also provide clear qualitative and quantitative predictions for soon to become available LHC experimental data. Comprehensive agreement between our predictions and experimental results provides a good deal of confidence that our dynamical energy loss formalism can well explain the jet-medium interactions in QGP, which will be further tested by the obtained predictions for the upcoming data. Application of this model, as a novel high-precision tomographic tool of QGP medium, are also discussed.

  9. Design and Optimization of the Slide Guide System of Hydraulic Press Based on Energy Loss Analysis

    Directory of Open Access Journals (Sweden)

    Mengdi Gao

    2016-06-01

    Full Text Available The clearances in the slide guide system of a hydraulic press are one of the significant factors affecting its accuracy. These clearances also affect the energy consumption of the press. An energy loss model that considers the oil leaks and friction associated with these clearances was proposed, and the size of clearances was optimized based on the model. The maximum allowable eccentric load and the energy loss on the wedge clearance condition were calculated to ensure the slide and guide pillars function properly. The stiffness of pillars and wear of guide rails were checked under an eccentric load condition. A case for rapid sheet metal forming with a 20 MN hydraulic press was examined. For this case, the optimum fit clearances were found to be approximately 0.4 mm. The energy loss under an eccentric load condition was increased by approximately 83% compared to a non-eccentric load condition. The pillars were optimized by reducing excessive stiffness, which served to decrease the pillar weight by nearly 20%.

  10. Implications of mass and energy loss due to coronal mass ejections on magnetically-active stars

    CERN Document Server

    Drake, Jeremy J; Yashiro, Seiji; Gopalswamy, Nat

    2013-01-01

    Analysis of a database of solar coronal mass ejections (CMEs) and associated flares over the period 1996-2007 finds well-behaved power law relationships between the 1-8 AA flare X-ray fluence and CME mass and kinetic energy. We extrapolate these relationships to lower and higher flare energies to estimate the mass and energy loss due to CMEs from stellar coronae, assuming that the observed X-ray emission of the latter is dominated by flares with a frequency as a function of energy dn/dE=kE^-alpha. For solar-like stars at saturated levels of X-ray activity, the implied losses depend fairly weakly on the assumed value of alpha and are very large: M_dot ~ 5x10^-10 M_sun/yr and E_dot ~ 0.1L_sun. In order to avoid such large energy requirements, either the relationships between CME mass and speed and flare energy must flatten for X-ray fluence >~ 10^31 erg, or the flare-CME association must drop significantly below 1 for more energetic events. If active coronae are dominated by flares, then the total coronal energ...

  11. STUDY ON PHYSICAL CONNOTATION OF AVERAGE BOND ENERGY Em%平均键能Em的物理内涵探讨

    Institute of Scientific and Technical Information of China (English)

    王仁智; 郑永梅; 李书平

    2001-01-01

    在面心立方(fcc)、体心立方(bcc)和六角密堆积(hcp)3种不同结构晶体的自由电子能带模型中,发现4个最低能带与5个次低能带本征值的平均能量(称为平均键能,Em)与费米能级(EF)相当接近;并进一步在hcp结构的钛(Ti)、锆(Zr)和铪(Hf)以及bcc结构的铁(Fe)等金属中,采用从头赝势能带计算方法和平均键能计算方法,证实在这些金属的实际能带中,平均键能(Em)值仍然非常接近于费米能级(EF)值.该发现有助于进一步了解平均键能(Em)的物理内涵.%In free electron band model of three different crystal structures,face-centered cubic (fcc),body-centered cubic (bcc),and hexagonal close-packed (hcp) structures,we fine that the average energy of the four lowest band eigenvalues and the five sub-low band eigenvalues (called as average bond energy Em) is rather close to Fermi level EF.Meanwhile,we also confirm that this conclusion still holds for the practical band in some metals,such as Ti,Zr and Hf with hcp structure as well as Fe with bcc structure etc.,using ab initio pseudopotential and average bond energy methods.Thereby one can further understand the physical connotation of average bond energy Em.

  12. Optimizing cost and minimizing energy loss in the recirculating race-track design of the LHeC electron linac

    CERN Document Server

    Skrabacz, J

    2008-01-01

    The objective of this project is to propose an optimal design of a recirculating electron linac for a future LHC-based e-p collider_the LHeC [1, 2]. Primary considerations are the cost, structure, shape, and size of the recirculating track, the optimal number of revolutions through which the e-beam should be accelerated, and radiative energy loss in the bends. Secondary considerations are transverse emittance growth due to radiation, the number of dipoles needed in order to maintain an upper bound on the emittance growth, the average length of such dipoles, and the maximum bending dipole field needed to recirculate the beam. These effects will be studied macroscopically with respect to the overall structure, in that smaller effects related to machine optics of the lattice structure will be neglected. The scope of the optimization problem is, in essence, a "first order" insight into optimal dimensions, centered on minimizing the most important parameter_cost.

  13. Measurement of the energy loss of heavy ions in laser-produced plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Knobloch-Maas, Renate

    2009-11-25

    The interaction of ions with plasma is not yet fully understood today, although it is important for inertial fusion technology. During recent years, the energy loss of heavy ions in plasma has therefore been a subject of research in the Laser and Plasma Physics group of Darmstadt University of Technology. Several experiments were carried out at the Gesellschaft fuer Schwerionenforschung (GSI) in Darmstadt using laser-created plasma, thereby taking advantage of the unique combination of GSI's accelerator facility and the laser system nhelix, which is also described in this work. The experiments focus on the measurement of the energy loss of medium heavy ions in a plasma created by directly heating a thin carbon foil with the nhelix laser, at an energy of about 50 J. In order to measure the energy loss using a time-of-flight method, a stop detector is used to register the arrival of the ion pulses after passing the plasma and a 12 m drift space. At the beginning of the work on this thesis, the ion detector types formerly used were found to be inadequately suited to the difficult task; this was changed during this thesis. The ion detector has to be able to temporarily resolve ion pulses with a frequency of 108 MHz and a width (FWHM) of 3 ns at a very low current. It also has to withstand the X-ray burst from the plasma with a dead time shorter than the difference between the X-ray and the ion time of flight between the plasma and the detector. In order to satisfy these and other demands, a new diamond detector was designed and has now been used for several measurements. In addition to the new detector, other improvements were made concerning the diagnostics and the laser. The laser-created plasma now reaches a maximum temperature exceeding 200 eV and a free electron density of up to 10{sup 22} cm{sup -3}. With this greatly improved setup, energy loss data could be obtained with a temporal resolution several times better than before, using an ion beam with a

  14. Theoretical analysis and numerical simulation of mechanical energy loss and wall resistance of steady open channel flow

    Institute of Scientific and Technical Information of China (English)

    刘士和; 薛娇

    2016-01-01

    The mechanical energy loss and the wall resistance are very important in practical engineering. These problems are investigated through theoretical analysis and numerical simulation in this paper. The results are as follows. (1) A new mechanical energy equation for the total flow is obtained, and a general formula for the calculation of the mechanical energy loss is proposed. (2) The general relationship between the wall resistance and the mechanical energy loss for the steady channel flow is obtained, the simplified form of which for the steady uniform channel flow is in consistent with the formula used in Hydraulics deduced byπ theorem and dimensional analysis. (3) The steady channel flow over a backward facing step with a small expansion ratio is numerica- lly simulated, and the mechanical energy loss, the wall resistance as well as the relationship between the wall resistance and the mechanical energy loss are calculated and analyzed.

  15. N-losses and energy use in a scenario for conversion to organic farming

    DEFF Research Database (Denmark)

    Dalgaard, Tommy; Kjeldsen, Chris; Hutchings, Nick;

    2002-01-01

    is not straightforward, and different scenarios for conversion to organic farming might lead to reduced or increased N-losses and E-use. This paper presents a scenario tool that uses a Geographical Information System in association with models for crop rotations, fertilisation practices, N-losses, and E...... reduction at the 95% level. We therefore recommend further research in how conversion to organic farming or other changes in the agricultural practice might help to reduce N-surpluses and E-uses. In that context, the presented scenario tool would be useful......The aims of organic farming include the recycling of nutrients and organic matter and the minimisation of the environmental impact of agriculture. Reduced nitrogen (N)-losses and energy (E)-use are therefore fundamental objectives of conversion to organic farming. However, the case...

  16. Investigation of energy losses in low-coercivity resin-bonded magnets in alternating magnetic fields

    Science.gov (United States)

    Milov, E. V.; Sipin, I. A.; Milov, V. N.; Andreenko, A. S.; Balan, I. A.

    2017-01-01

    Energy losses during alternating remagnetization of low-coercitivity resin-bonded magnets and commercially produced electrical steels were studied experimentally. The studies were conducted on several samples of resin-bonded magnets with different manufacturing technologies and samples of electrical steel sheets of various thicknesses. The static and dynamic magnetic properties of the samples were measured on a vibration magnetometer and a specially designed apparatus, respectively. It was found that the studied samples of bonded magnets have a relatively high level of hysteresis losses associated with high coercivity, which reaches a value of 4-5 Oe. At the same time, the remagnetization losses due to the Foucault currents in the bonded magnets are considerably lower than in electrical steels. The measurement results show that bonded magnets at high frequencies of remagnetization, especially in high-rpm motors, can be competitive in comparison with electrical steels.

  17. The Equipartition Magnetic Field Formula in Starburst Galaxies: Accounting for Pionic Secondaries and Strong Energy Losses

    CERN Document Server

    Lacki, Brian C

    2013-01-01

    Equipartition arguments provide an easy way to find a characteristic scale for the magnetic field from radio emission, by assuming the energy densities in cosmic rays and magnetic fields are the same. Yet most of the cosmic ray content in star-forming galaxies is in protons, which are invisible in radio emission. Therefore, the argument needs assumptions about the proton spectrum, typically that of a constant proton/electron ratio. In some environments, particularly starburst galaxies, the reasoning behind these assumptions does not necessarily hold: secondary pionic positrons and electrons may be responsible for most of the radio emission, and strong energy losses can alter the proton/electron ratio. We derive an equipartition expression that should work in a hadronic loss-dominated environment like starburst galaxies. Surprisingly, despite the radically different assumptions from the classical equipartition formula, numerically the results for starburst magnetic fields are similar. We explain this fortuitou...

  18. Point-source idealization in classical field theories. II. Mechanical energy losses from electromagnetic radiation reaction

    Science.gov (United States)

    Kates, Ronald E.; Rosenblum, Arnold

    1982-05-01

    This paper compares the mechanical energy losses due to electromagnetic radiation reaction on a two-particle, slow-motion system, as calculated from (1) the method of matched asymptotic expansions and (2) the Lorentz-Dirac equation, which assumes point sources. The matching derivation of the preceding paper avoided the assumption of a δ-function source by using Reissner-Nordström matching zones. Despite the differing mathematical assumptions of the two methods, their results are in agreement with each other and with the electromagnetic-field energy losses calculated by the evaluation of flux integrals. Our purpose is eventually to analyze Rosenblum's use of point sources as a possible cause of disagreement between the analogous calculations of gravitational radiation on a slow-motion system of two bodies. We begin with the simpler electromagnetic problem.

  19. Heavy Quark Tomography of A+A Including Elastic and Inelastic Energy Loss

    CERN Document Server

    Wicks, S; Gyulassy, M; Horowitz, W; Djordjevic, Magdalena; Gyulassy, Miklos; Horowitz, William; Wicks, Simon

    2005-01-01

    We propose a possible perturbative QCD solution to the heavy quark tomography problem posed by recent non-photonic single electron data from central Au+Au collisions at $\\sqrt{s} = 200$ AGeV. Jet quenching theory is extended to include (1) elastic as well as (2) inelastic parton energy losses and (3) jet path length fluctuations. The three effects combine to reduce the discrepancy between theory and the data without violating the global entropy bounds from multiplicity and elliptic flow data. We also check for consistency with the pion suppression data out to 20 GeV. Fluctuations of the geometric jet path lengths and the difference between the widths of fluctuations of elastic and inelastic energy loss play essential roles in the proposed solution.

  20. A simple model for predicting sprint-race times accounting for energy loss on the curve

    Science.gov (United States)

    Mureika, J. R.

    1997-11-01

    The mathematical model of J. Keller for predicting World Record race times, based on a simple differential equation of motion, predicted quite well the records of the day. One of its shortcoming is that it neglects to account for a sprinter's energy loss around a curve, a most important consideration particularly in the 200m--400m. An extension to Keller's work is considered, modeling the aforementioned energy loss as a simple function of the centrifugal force acting on the runner around the curve. Theoretical World Record performances for indoor and outdoor 200m are discussed, and the use of the model at 300m is investigated. Some predictions are made for possible 200m outdoor and indoor times as run by Canadian 100m WR holder Donovan Bailey, based on his 100m final performance at the 1996 Olympic Games in Atlanta.

  1. A Simple Model for Predicting Sprint Race Times Accounting for Energy Loss on the Curve

    CERN Document Server

    Mureika, J R

    1997-01-01

    The mathematical model of J. Keller for predicting World Record race times, based on a simple differential equation of motion, predicted quite well the records of the day. One of its shortcoming is that it neglects to account for a sprinter's energy loss around a curve, a most important consideration particularly in the 200m--400m. An extension to Keller's work is considered, modeling the aforementioned energy loss as a simple function of the centrifugal force acting on the runner around the curve. Theoretical World Record performances for indoor and outdoor 200m are discussed, and the use of the model at 300m is investigated. Some predictions are made for possible 200m outdoor and indoor times as run by Canadian 100m WR holder Donovan Bailey, based on his 100m final performance at the 1996 Olympic Games in Atlanta.

  2. Measurements of energy loss in the scrape-off layer of C-2U

    Science.gov (United States)

    Griswold, M. E.; Korepanov, S.; Thompson, M. C.; the TAE Team Team

    2016-10-01

    We report on measurements of energy transport in the scrape-off layer (SOL) plasma that surrounds the advanced beam-driven field reversed configuration (FRC) of the C-2U experiment at Tri Alpha Energy. The SOL plasma is trapped on mirror-like open field lines outside of the FRC separatrix that connect to material surfaces at both ends of the vacuum vessel. Heat transport in this region is expected to be convective, like in mirror machines, and can be characterized by the amount of energy lost per electron-ion pair. We measured this value with an end loss analyzer system that consists of gridded ion energy analyzers that measure ion current density and pyroelectric crystal bolometers that measure total particle power flux.

  3. Channeling energy loss of O ions in Si The Bark as effect

    CERN Document Server

    Araujo, L L; Behar, M; Dias, J F; Santos, J H; Schiwietz, G

    2002-01-01

    In this work we report on measurements of channeling stopping powers of sup 1 sup 6 O ions along Si axial direction for the energy range between 250 keV/u and 1 MeV/u by using the Rutherford backscattering technique with separated by implanted oxygen targets. In connection with the recent developed unitary convolution approximation, we are able to extract the Barkas contribution to the energy loss with high precision. This effect is clearly separated from other processes and amounts to about 15%. The observed Barkas contribution from the valence-electron gas is in agreement with the Lindhard model for higher energies. However, in contrast to recent investigations for Li ions, the Barkas effect at the lowest energies seems to saturate, indicating other non-perturbative terms in the polarization field induced by the O ions in Si.

  4. Novel Molecules Regulating Energy Homeostasis: Physiology and Regulation by Macronutrient Intake and Weight Loss

    Directory of Open Access Journals (Sweden)

    Anna Gavrieli

    2016-09-01

    Full Text Available Excess energy intake, without a compensatory increase of energy expenditure, leads to obesity. Several molecules are involved in energy homeostasis regulation and new ones are being discovered constantly. Appetite regulating hormones such as ghrelin, peptide tyrosine-tyrosine and amylin or incretins such as the gastric inhibitory polypeptide have been studied extensively while other molecules such as fibroblast growth factor 21, chemerin, irisin, secreted frizzle-related protein-4, total bile acids, and heme oxygenase-1 have been linked to energy homeostasis regulation more recently and the specific role of each one of them has not been fully elucidated. This mini review focuses on the above mentioned molecules and discusses them in relation to their regulation by the macronutrient composition of the diet as well as diet-induced weight loss.

  5. Electron energy-loss spectroscopy of excited states of the pyridine molecules

    Science.gov (United States)

    Linert, Ireneusz; Zubek, Mariusz

    2016-04-01

    Electron energy-loss spectra of the pyridine, C5H5N, molecules in the gas phase have been measured to investigate electronic excitation in the energy range 3.5-10 eV. The applied wide range of residual electron energy and the scattering angle range from 10° to 180° enabled to differentiate between optically-allowed and -forbidden transitions. These measurements have allowed vertical excitation energies of the triplet excited states of pyridine to be determined and tentative assignments of these states to be proposed. Some of these states have not been identified in the previous works. Contribution to the Topical Issue "Advances in Positron and Electron Scattering", edited by Paulo Limao-Vieira, Gustavo Garcia, E. Krishnakumar, James Sullivan, Hajime Tanuma and Zoran Petrovic.

  6. Coherent Radiative Parton Energy Loss beyond the BDMPS-Z Limit

    CERN Document Server

    Zapp, Korinna C

    2012-01-01

    It is widely accepted that a phenomenologically viable theory of jet quenching for heavy ion collisions requires the understanding of medium-induced parton energy loss beyond the limit of eikonal kinematics formulated by Baier-Dokshitzer-Mueller-Peigne-Schiff and Zakharov (BDMPS-Z). Here, we supplement a recently developed exact Monte Carlo implementation of the BDMPS-Z formalism with elementary physical requirements including exact energy-momentum conservation, a refined formulation of jet-medium interactions and a treatment of all parton branchings on the same footing. We document the changes induced by these physical requirements and we describe their kinematic origin.

  7. Coherent radiative parton energy loss beyond the BDMPS-Z limit

    Energy Technology Data Exchange (ETDEWEB)

    Zapp, Korinna Christine [Durham University, Institute for Particle Physics Phenomenology, Durham (United Kingdom); Wiedemann, Urs Achim [CERN, Theory Unit, Department of Physics, Geneva 23 (Switzerland)

    2012-06-15

    It is widely accepted that a phenomenologically viable theory of jet quenching for heavy ion collisions requires the understanding of medium-induced parton energy loss beyond the limit of eikonal kinematics formulated by Baier-Dokshitzer-Mueller-Peigne-Schiff and Zakharov (BDMPS-Z). Here, we supplement a recently developed exact Monte Carlo implementation of the BDMPS-Z formalism with elementary physical requirements including exact energy-momentum conservation, a refined formulation of jet-medium interactions and a treatment of all parton branchings on the same footing. We document the changes induced by these physical requirements and we describe their kinematic origin. (orig.)

  8. Determination of the area density and composition of alloy film using dual alpha particle energy loss

    Science.gov (United States)

    Ma, Xiaojun; Li, Bo; Gao, Dangzhong; Xu, Jiayun; Tang, Yongjian

    2017-02-01

    A novel method based on dual α-particles energy loss (DAEL) is proposed for measuring the area density and composition of binary alloy films. In order to obtain a dual-energy α-particles source, an ingenious design that utilizes the transmitted α-particles traveling the thin film as a new α-particles source is presented. Using the DAEL technique, the area density and composition of Au/Cu film are determined accurately with an uncertainty of better than 10%. Finally, some measures for improving the combined uncertainty are discussed.

  9. CMOS circuits for piezoelectric energy harvesters efficient power extraction, interface modeling and loss analysis

    CERN Document Server

    Hehn, Thorsten

    2014-01-01

    This book deals with the challenge of exploiting ambient vibrational energy which can be used to power small and low-power electronic devices, e.g. wireless sensor nodes. Generally, particularly for low voltage amplitudes, low-loss rectification is required to achieve high conversion efficiency. In the special case of piezoelectric energy harvesting, pulsed charge extraction has the potential to extract more power compared to a single rectifier. For this purpose, a fully autonomous CMOS integrated interface circuit for piezoelectric generators which fulfills these requirements is presented.Due

  10. Time-dependent density functional calculation of the energy loss of antiprotons colliding with metallic nanoshells

    Energy Technology Data Exchange (ETDEWEB)

    Quijada, M. [Departamento de Fisica de Materiales, Facultad de Quimicas UPV/EHU, Apartado 1072, 20080 San Sebastian (Spain); Donostia International Physics Center DIPC, P. Manuel de Lardizabal 4, 20018 San Sebastian (Spain); Borisov, A.G. [Donostia International Physics Center DIPC, P. Manuel de Lardizabal 4, 20018 San Sebastian (Spain); Universite Paris-Sud, Laboratoire des Collisions Atomiques et Moleculaires (France); CNRS, UMR 8625, Laboratoire des Collisions Atomiques et Moleculaires, LCAM, Batiment 351, UPS-11, Orsay, 91405 Orsay Cedex (France); Muino, R.D. [Donostia International Physics Center DIPC, P. Manuel de Lardizabal 4, 20018 San Sebastian (Spain); Centro de Fisica de Materiales, Centro Mixto CSIC-UPV/EHU, Edificio Korta, Avenida de Tolosa 72, 20018 San Sebastian (Spain)

    2008-06-15

    Time-dependent density functional theory is used to study the interaction between antiprotons and metallic nanoshells. The ground state electronic properties of the nanoshell are obtained in the jellium approximation. The energy lost by the antiproton during the collision is calculated and compared to that suffered by antiprotons traveling in metal clusters. The resulting energy loss per unit path length of material in thin nanoshells is larger than the corresponding quantity for clusters. It is shown that the collision process can be interpreted as the antiproton crossing of two nearly bi-dimensional independent metallic systems. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. Competing effects of electronic and nuclear energy loss on microstructural evolution in ionic-covalent materials

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanwen [ORNL; Varga, Tamas [Pacific Northwest National Laboratory (PNNL); Ishimaru, Dr. Manabu [Osaka University; Edmondson, Dr. Philip [University of Oxford; Xue, Haizhou [University of Tennessee, Knoxville (UTK); Liu, Peng [University of Tennessee, Knoxville (UTK); Moll, Sandra [French Atomic Energy Commission (CEA), Centre de Saclay, Gif sur Yvette; Namavar, Fereydoon [University of Nebraska Medical Center; Hardiman, Chris [North Carolina State University; Shannon, Prof. Steven [North Carolina State University; Weber, William J [ORNL

    2014-01-01

    Ever increasing energy needs have raised the demands for advanced fuels and cladding materials that withstand the extreme radiation environments with improved accident tolerance over a long period of time. Ceria (CeO2) is a well known ionic conductor that is isostructural with urania and plutonia-based nuclear fuels. In the context of nuclear fuels, immobilization and transmutation of actinides, CeO2 is a model system for radiation effect studies. Covalent silicon carbide (SiC) is a candidate for use as structural material in fusion, cladding material for fission reactors, and an inert matrix for the transmutation of plutonium and other radioactive actinides. Understanding microstructural change of these ionic-covalent materials to irradiation is important for advanced nuclear energy systems. While displacements from nuclear energy loss may be the primary contribution to damage accumulation in a crystalline matrix and a driving force for the grain boundary evolution in nanostructured materials, local non-equilibrium disorder and excitation through electronic energy loss may, however, produce additional damage or anneal pre-existing defect. At intermediate transit energies where electronic and nuclear energy losses are both significant, synergistic, additive or competitive processes may evolve that affect the dynamic response of materials to irradiation. The response of crystalline and nanostructured CeO2 and SiC to ion irradiation are studied under different nuclear and electronic stopping powers to describe some general material response in this transit energy regime. Although fast radiation-induced grain growth in CeO2 is evident with no phase transformation, different fluence and dose dependence on the growth rate is observed under Si and Au irradiations. While grain shrinkage and amorphization are observed in the nano-engineered 3C SiC with a high-density of stacking faults embedded in nanosize columnar grains, significantly enhanced radiation resistance is

  12. Surface plasmon modes of a single silver nanorod: An electron energy loss study

    DEFF Research Database (Denmark)

    Nicoletti, Olivia; Wubs, Martijn; Mortensen, N. Asger;

    2011-01-01

    We present an electron energy loss study using energy filtered TEM of spatially resolved surface plasmon excitations on a silver nanorod of aspect ratio 14.2 resting on a 30 nm thick silicon nitride membrane. Our results show that the excitation is quantized as resonant modes whose intensity maxima...... vary along the nanorod's length and whose wavelength becomes compressed towards the ends of the nanorod. Theoretical calculations modelling the surface plasmon response of the silver nanorodsilicon nitride system show the importance of including retardation and substrate effects in order to describe...

  13. Testing AdS/CFT drag and pQCD heavy quark energy loss

    Science.gov (United States)

    Horowitz, W. A.; Gyulassy, M.

    2008-10-01

    We present charm and bottom nuclear modification factors for RHIC and LHC using standard model perturbative QCD and recent AdS/CFT string drag energy loss models. We find that extreme extrapolations to LHC mask potential experimentally determinable differences in the individual RAAs but that their ratio, RcAA/RbAA, as a function of transverse momentum is a remarkably robust observable for finding deviations from either theoretical framework.

  14. Comments on gravitational radiation damping and energy loss in binary systems

    Energy Technology Data Exchange (ETDEWEB)

    Ehlers, J.; Rosenblum, A.; Goldberg, J.N.; Havas, P.

    1976-09-01

    It is argued that a formula for the energy loss due to gravitaional radiation of bound systems such as binaries has not yet been derived either exactly or by means of a consistent approximation method within general relativity, a view which contradicts some widely accepted claims in the literature. The main aproaches used to obtain such a formula are critically reviewed, and it is pointed out that the derivations presented so far either contain inconsistencies or are incomplete. (AIP)

  15. Three dimensional numerical prediction of icing related power and energy losses on a wind turbine

    Science.gov (United States)

    Sagol, Ece

    Regions of Canada experience harsh winter conditions that may persist for several months. Consequently, wind turbines located in these regions are exposed to ice accretion and its adverse effects, from loss of power to ceasing to function altogether. Since the weather-related annual energy production loss of a turbine may be as high as 16% of the nominal production for Canada, estimating these losses before the construction of a wind farm is essential for investors. A literature survey shows that most icing prediction methods and codes are developed for aircraft, and, as this information is mostly considered corporate intellectual property, it is not accessible to researchers in other domains. Moreover, aircraft icing is quite different from wind turbine icing. Wind turbines are exposed to icing conditions for much longer periods than aircraft, perhaps for several days in a harsh climate, whereas the maximum length of exposure of an aircraft is about 3-4 hours. In addition, wind turbine blades operate at subsonic speeds, at lower Reynolds numbers than aircraft, and their physical characteristics are different. A few icing codes have been developed for wind turbine icing nevertheless. However, they are either in 2D, which does not consider the 3D characteristics of the flow field, or they focus on simulating each rotation in a time-dependent manner, which is not practical for computing long hours of ice accretion. Our objective in this thesis is to develop a 3D numerical methodology to predict rime ice shape and the power loss of a wind turbine as a function of wind farm icing conditions. In addition, we compute the Annual Energy Production of a sample turbine under both clean and icing conditions. The sample turbine we have selected is the NREL Phase VI experimental wind turbine installed on a wind farm in Sweden, the icing events at which have been recorded and published. The proposed method is based on computing and validating the clean performance of the turbine

  16. Energy loss process analysis for radiation degradation and immediate recovery of amorphous silicon alloy solar cells

    Science.gov (United States)

    Sato, Shin-ichiro; Beernink, Kevin; Ohshima, Takeshi

    2015-06-01

    Performance degradation of a-Si/a-SiGe/a-SiGe triple-junction solar cells due to irradiation of silicon ions, electrons, and protons are investigated using an in-situ current-voltage measurement system. The performance recovery immediately after irradiation is also investigated. Significant recovery is always observed independent of radiation species and temperature. It is shown that the characteristic time, which is obtained by analyzing the short-circuit current annealing behavior, is an important parameter for practical applications in space. In addition, the radiation degradation mechanism is discussed by analyzing the energy loss process of incident particles (ionizing energy loss: IEL, and non-ionizing energy loss: NIEL) and their relative damage factors. It is determined that ionizing dose is the primarily parameter for electron degradation whereas displacement damage dose is the primarily parameter for proton degradation. This is because the ratio of NIEL to IEL in the case of electrons is small enough to be ignored the damage due to NIEL although the defect creation ratio of NIEL is much larger than that of IEL in the cases of both protons and electrons. The impact of “radiation quality effect” has to be considered to understand the degradation due to Si ion irradiation.

  17. A measurement of the energy loss spectrum of 150 GeV muons in iron

    CERN Document Server

    Berger, E; Dawson, J; Fuess, T A; Guarino, V; Hill, N; Magill, S; May, E; Nodulman, L; Price, L E; Proudfoot, J; Stanek, R; Underwood, D G; Wagner, R; Wicklund, B; Blanchot, G; Bosman, M; Casado, M P; Cavalli-Sforza, M; Efthymiopoulos, I; Ivanyushenkov, Yu M; Juste, A; Miralles, L; Orteu, S; Padilla, C; Perlas, J A; Riu, I; Ronceux, B; Teubert, F; Anderson, K J; Blucher, E; Evans, H; Merritt, F S; Pilcher, J E; Sanders, H; Shochet, M J; Tang, F; Turcot, A S; Wagner, D; Arsenescu, R; Constantinescu, S; Blaj, C; Boldea, V; Dita, S; Ajaltouni, Ziad J; Badaud, F; Bouhemaid, N; Brette, P; Brossard, M; Chadelas, R; Chevaleyre, J C; Crouau, M; Daudon, F; Dugne, J J; Michel, B; Montarou, G; Muanza, G S; Pallin, D; Plothow-Besch, Hartmute; Poirot, S; Reinmuth, G; Says, L P; Vazeille, F; Cobal, M; Gildemeister, O; Nessi, Marzio; Henriques, A; Poggioli, Luc; Sonderegger, P; Karapetian, G V; Astvatsaturov, A R; Borisov, O N; Budagov, Yu A; Chirikov-Zorin, I E; Chlachidze, G; Glagolev, V V; Kakurin, S; Kolomoets, V; Kovtun, V E; Kukhtin, V V; Lebedev, A; Liba, I; Lomakina, O V; Lomakin, Yu F; Malyukov, S N; Minashvili, I A; Pantea, D; Pukhov, O; Romanov, V; Rusakovitch, N A; Senchyshyn, V G; Semenov, V; Sissakian, A N; Shchelchkov, V; Shevtsov, A; Studenov, S; Tokár, S; Topilin, N D; Vinogradov, V; Vorozhtsov, S B; Yarygin, G; Cogswell, F; Downing, R; Errede, D; Errede, S; Haney, M; Simaitis, V J; Thaler, J J; Amaral, P; Amorim, A; Carvalho, J; David, M; Gómez, A; Maio, A; Martins, J P; Onofre, A; Wolters, H; Bromberg, C; Huston, J; Miller, R; Richards, R; Yosef, C; Alifanov, A; Bogush, A A; Golubev, V B; Rumyantsev, V; Kulchitskii, Yu A; Angelini, C; Autiero, D; Cavasinni, V; Costanzo, D; De Santo, A; Del Prete, T; Di Girolamo, B; Flaminio, Vincenzo; Lami, S; Lazzeroni, C; Mazzoni, E; Renzoni, G; Davidek, T; Dolejsi, J; Dolezal, Z; Leitner, R; Soustruznik, K; Suk, M; Tas, P; Trka, Z; Valkár, S; Zdrazil, M; Lokajícek, M; Némécek, S; Karyukhin, A N; Klioukhine, V I; Khokhlov, Yu A; Kopikov, S V; Kostrikov, M E; Kulagin, M; Lapin, V; Protopopov, Yu; Sidorov, V; Solodkov, A A; Starchenko, E A; Surkov, A; Zaitsev, A; Calôba, L P; Gaspar, M; Marroquin, F; Pereira, A; Seixas, J M; Berglund, S R; Bohm, C; Johansson, E K; Hellman, S; Holmgren, S O; Jon-And, K; Selldén, B; Tardell, S; Yamdagni, N; Ferrer, A; Honoré, P F; Albiol, F; De, K; Gallas, E J; Li, J; Sawyer, L; Stephens, R; Turcotte, M; White, A; Hakopian, H H; Grabskii, V; Mnatzakanian, E A; Vartapetian, A H

    1997-01-01

    The energy loss spectrum of 150 GeV muons has been measured with a prototype of the ATLAS hadron calorimeter in the H8 beam of the CERN SPS.\\\\ The differential probability $dP/dv$ per radiation length of a fractional energy loss $v = \\Delta E_{\\mu} / E_{\\mu}$ has been measured in the range $v = 0.01 \\div 0.95 $; it is then compared with the theoretical predictions for energy losses due to bremsstrahlung and production of electron-positron pairs or of energetic knock-on electrons.\\\\ The integrated probability $\\int_{0.01}^{0.95} (dP/dv) dv$ is $(1.610\\pm0.015_{stat.}\\pm0.105_{syst.})\\cdot10^{-3}$ in agreement with the theoretical predictions of $1.556\\cdot10^{-3}$ and $1.619\\cdot10^{-3}$. %7.8.96 - start Agreement with theory is also found in two intervals of $v$ where production of electron-positron pairs and knock-on electrons dominates. In the region of bremsstrahlung dominance ($v = 0.12\\div0.95$) the measured integrated probability $(1.160\\pm0.040_{stat}\\pm0.075_{syst})\\cdot 10^{-4}$ is in agreement with ...

  18. The equipartition magnetic field formula in starburst galaxies: accounting for pionic secondaries and strong energy losses

    Science.gov (United States)

    Lacki, Brian C.; Beck, Rainer

    2013-04-01

    Equipartition arguments provide an easy way to find a characteristic scale for the magnetic field from radio emission by assuming that the energy densities in cosmic rays and magnetic fields are the same. Yet most of the cosmic ray content in star-forming galaxies is in protons, which are invisible in radio emission. Therefore, the argument needs assumptions about the proton spectrum, typically that of a constant proton/electron ratio. In some environments, particularly starburst galaxies, the reasoning behind these assumptions does not necessarily hold: secondary pionic positrons and electrons may be responsible for most of the radio emission, and strong energy losses can alter the proton/electron ratio. We derive an equipartition expression that should work in a hadronic loss-dominated environment like starburst galaxies. Surprisingly, despite the radically different assumptions from the classical equipartition formula, numerically the results for starburst magnetic fields are similar. We explain this fortuitous coincidence using the energetics of secondary production and energy loss times. We show that these processes cause the proton/electron ratio to be ˜100 for GHz-emitting electrons in starbursts.

  19. VizieR Online Data Catalog: Radiative recombination electron energy loss data (Mao+, 2017)

    Science.gov (United States)

    Mao, J.; Kaastra, J.; Badnell, N. R.

    2016-11-01

    The weighted electron energy loss factors (dimensionless) are defined by weighting the electron energy loss rate coefficients (per ion) with respect to the total radiative recombination rates. Both the unparameterized and parameterized weighted electron energy-loss factors for H-like to Ne-like ions from H (z=1) up to and including Zn (z=30), in a wide temperature range, are available here. For the unparameterized data set, the temperatures are set to the conventional ADAS temperature grid, i.e. c2*(10,20,50,100,200,...,2*106,5*106,107)K, where c is the ionic charge of the recombined ion. For the fitting parameters, the temperature should be in units of eV. We refer to the recombined ion when we speak of the radiative recombination of a certain ion, for example, for a bare oxygen ion capturing a free electron via radiative recombination to form H-like oxygen (O VIII, s=1, z=8). The fitting accuracies are better than 4%. (2 data files).

  20. Energy loss of a high charge bunched electron beam in plasma: Simulations, scaling, and accelerating wakefields

    Directory of Open Access Journals (Sweden)

    J. B. Rosenzweig

    2004-06-01

    Full Text Available The energy loss and gain of a beam in the nonlinear, “blowout” regime of the plasma wakefield accelerator, which features ultrahigh accelerating fields, linear transverse focusing forces, and nonlinear plasma motion, has been asserted, through previous observations in simulations, to scale linearly with beam charge. Additionally, from a recent analysis by Barov et al., it has been concluded that for an infinitesimally short beam, the energy loss is indeed predicted to scale linearly with beam charge for arbitrarily large beam charge. This scaling is predicted to hold despite the onset of a relativistic, nonlinear response by the plasma, when the number of beam particles occupying a cubic plasma skin depth exceeds that of plasma electrons within the same volume. This paper is intended to explore the deviations from linear energy loss using 2D particle-in-cell simulations that arise in the case of experimentally relevant finite length beams. The peak accelerating field in the plasma wave excited behind the finite-length beam is also examined, with the artifact of wave spiking adding to the apparent persistence of linear scaling of the peak field amplitude into the nonlinear regime. At large enough normalized charge, the linear scaling of both decelerating and accelerating fields collapses, with serious consequences for plasma wave excitation efficiency. Using the results of parametric particle-in-cell studies, the implications of these results for observing severe deviations from linear scaling in present and planned experiments are discussed.

  1. A precise measurement of 180 GeV muon energy losses in iron

    CERN Document Server

    Amaral, P; Anderson, K; Artikov, A; Benetta, R; Berglund, S R; Biscarat, C; Blanch, O; Blanchot, G; Bogush, A A; Bohm, C; Boldea, V; Borisov, O N; Bosman, M; Bromberg, C; Bravo, S; Budagov, Yu A; Burdin, S V; Calôba, L P; Camarena, F; Carvalho, J; Castillo, M V; Cavalli-Sforza, M; Cavasinni, V; Cerqueira, A S; Chadelas, R; Chirikov-Zorin, I E; Chlachidze, G; Cobal, M; Cogswell, F; Cologna, S; Constantinescu, S; Costanzo, D; Cowan, Brian; Crouau, M; Daudon, F; David, M; Davidek, T; Dawson, J; De, K; Delfino, M C; Del Prete, T; De Santo, A; Di Girolamo, B; Dita, S; Downing, R; Engström, M; Errede, D; Errede, S; Fassi, F; Fenyuk, A; Ferrer, A; Flaminio, Vincenzo; Flix, J; Garabik, R; Gil, I; Gildemeister, O; Glagoley, V; Gómez, A; González de la Hoz, S; Grabskii, V; Grenier, P; Hakopian, H H; Haney, M; Hellman, S; Henriques, A; Hébrard, C; Higón, E; Holik, P; Holmgren, S O; Hruska, I; Huston, J; Jon-And, K; Kakurin, S; Karyukhin, A N; Khubua, J I; Kopikov, S V; Krivkova, P; Kukhtin, V V; Kulchitskii, Yu A; Kuzmin, M V; Lami, S; Lapin, V; Lazzeroni, C; Lebedev, A; Leitner, R; Li, J; Lomakin, Yu F; Lomakina, O V; Lokajícek, M; López-Amengual, J M; Maio, A; Malyukov, S N; Marroquin, F; Mataix, L; Mazzoni, E; Merritt, F S; Miller, R; Minashvili, I A; Miralles, L; Montarou, G; Némécek, S; Nessi, Marzio; Onofre, A; Ostankov, A P; Pacheco, A; Pallin, D; Pantea, D; Paoletti, R; Park, I C; Pilcher, J E; Pinhão, J; Price, L; Proudfoot, J; Pukhov, O; Reinmuth, G; Renzoni, G; Richards, R; Roda, C; Roldán, J; Romance, J B; Romanov, V; Rosnet, P; Ruiz, H; Rusakovitch, N A; Sanchis, E; Sanders, H; Santoni, C; Santo, J; Says, L P; Seixas, J M; Selldén, B; Semenov, A A; Shcelchkov, A; Shochet, M J; Silva, J; Simaitis, V J; Sissakian, A N; Solodkov, A A; Solovyanov, O; Sosebee, M; Soustruznik, K; Spanó, F; Stanek, R; Starchenko, E A; Stavina, O P; Suk, M; Sykora, I; Tang, F; Tas, P; Thaler, J J; Thome-Filho, Z D; Tokar, S; Topilin, N D; Valklar, S; Varanda, M J; Vartapetian, A H; Vazeille, F; Vichou, I; Vinogradov, V; Vorozhtsov, S B; White, A; Wolters, H; Yamdagni, N; Yarygin, G; Yosef, C; Zaitsev, A

    2001-01-01

    The energy loss spectrum of 180 GeV muons has been measured with the 5.6 m long finely segmented Module 0 of the ATLAS hadron tile calorimeter at the CERN SPS. The differential probability dP/d nu per radiation length of a fractional energy loss nu = Delta E/sub mu //E /sub mu / has been measured in the range 0.025energy losses due to bremsstrahlung, production of electron-positron pairs, and energetic knock-on electrons. The iron elastic form factor correction Delta /sub Fe//sup el/=1.63+or-0.17/sub stat/+or-023/sub syst$/ -/sub 0.14 //sup +0.20//sub theor/ to muon bremsstrahlung in the region of no screening of the nucleus by atomic electrons has been measured for the first time, and is compared with different theoretical predictions. (31 refs).

  2. New glass coatings for high insulating greenhouses without light losses - energy saving, crop production and economic potentials

    NARCIS (Netherlands)

    Hemming, S.

    2009-01-01

    More than 90% of Dutch greenhouse area is covered with single glass. Energy losses through the covering are high during heating period (winter) but energy requirements are also high during cooling period (summer) in the case of semiclosed greenhouses. Until now, light losses of insulating coverings

  3. Robust solution procedure for the discrete energy-averaged model on the calculation of 3D hysteretic magnetization and magnetostriction of iron–gallium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Tari, H., E-mail: tari.1@osu.edu; Scheidler, J.J., E-mail: scheidler.8@osu.edu; Dapino, M.J., E-mail: dapino.1@osu.edu

    2015-06-15

    A reformulation of the Discrete Energy-Averaged model for the calculation of 3D hysteretic magnetization and magnetostriction of iron-gallium (Galfenol) alloys is presented in this paper. An analytical solution procedure based on an eigenvalue decomposition is developed. This procedure avoids the singularities present in the existing approximate solution by offering multiple local minimum energy directions for each easy crystallographic direction. This improved robustness is crucial for use in finite element codes. Analytical simplifications of the 3D model to 2D and 1D applications are also presented. In particular, the 1D model requires calculation for only one easy direction, while all six easy directions must be considered for general applications. Compared to the approximate solution procedure, it is shown that the resulting robustness comes at no expense for 1D applications, but requires almost twice the computational effort for 3D applications. To find model parameters, we employ the average of the hysteretic data, rather than anhysteretic curves, which would require additional measurements. An efficient optimization routine is developed that retains the dimensionality of the prior art. The routine decouples the parameters into exclusive sets, some of which are found directly through a fast preprocessing step to improve accuracy and computational efficiency. The effectiveness of the model is verified by comparison with existing measurement data. - Highlights: • The discrete energy-averaged model for Galfenol is reformulated. • An analytical solution for 3D magnetostriction and magnetization is developed from eigenvalue decomposition. • Improved robustness is achieved. • An efficient optimization routine is developed to identify parameters from averaged hysteresis curves. • The effectiveness of the model is demonstrated against experimental data.

  4. TFAP2B influences the effect of dietary fat on weight loss under energy restriction.

    Directory of Open Access Journals (Sweden)

    Tanja Stocks

    Full Text Available BACKGROUND: Numerous gene loci are related to single measures of body weight and shape. We investigated if 55 SNPs previously associated with BMI or waist measures, modify the effects of fat intake on weight loss and waist reduction under energy restriction. METHODS AND FINDINGS: Randomized controlled trial of 771 obese adults. ( REGISTRATION: ISRCTN25867281. One SNP was selected for replication in another weight loss intervention study of 934 obese adults. The original trial was a 10-week 600 kcal/d energy-deficient diet with energy percentage from fat (fat% in range of 20-25 or 40-45. The replication study used an 8-weeks diet of 880 kcal/d and 20 fat%; change in fat% intake was used for estimation of interaction effects. The main outcomes were intervention weight loss and waist reduction. In the trial, mean change in fat% intake was -12/+4 in the low/high-fat groups. In the replication study, it was -23/-12 among those reducing fat% more/less than the median. TFAP2B-rs987237 genotype AA was associated with 1.0 kg (95% CI, 0.4; 1.6 greater weight loss on the low-fat, and GG genotype with 2.6 kg (1.1; 4.1 greater weight loss on the high-fat (interaction p-value; p = 0.00007. The replication study showed a similar (non-significant interaction pattern. Waist reduction results generally were similar. Study-strengths include (i the discovery study randomised trial design combined with the replication opportunity (ii the strict dietary intake control in both studies (iii the large sample sizes of both studies. Limitations are (i the low minor allele frequency of the TFAP2B polymorphism, making it hard to investigate non-additive genetic effects (ii the different interventions preventing identical replication-discovery study designs (iii some missing data for non-completers and dietary intake. No adverse effects/outcomes or side-effects were observed. CONCLUSIONS: Under energy restriction, TFAP2B may modify the effect of dietary fat intake on

  5. TFAP2B influences the effect of dietary fat on weight loss under energy restriction.

    Science.gov (United States)

    Stocks, Tanja; Angquist, Lars; Banasik, Karina; Harder, Marie N; Taylor, Moira A; Hager, Jörg; Arner, Peter; Oppert, Jean-Michel; Martinez, J Alfredo; Polak, Jan; Rousseau, Francis; Langin, Dominique; Rössner, Stephan; Holst, Claus; MacDonald, Ian A; Kamatani, Yoichiro; Pfeiffer, Andreas F H; Kunesova, Marie; Saris, Wim H M; Hansen, Torben; Pedersen, Oluf; Astrup, Arne; Sørensen, Thorkild I A

    2012-01-01

    Numerous gene loci are related to single measures of body weight and shape. We investigated if 55 SNPs previously associated with BMI or waist measures, modify the effects of fat intake on weight loss and waist reduction under energy restriction. Randomized controlled trial of 771 obese adults. ( ISRCTN25867281.) One SNP was selected for replication in another weight loss intervention study of 934 obese adults. The original trial was a 10-week 600 kcal/d energy-deficient diet with energy percentage from fat (fat%) in range of 20-25 or 40-45. The replication study used an 8-weeks diet of 880 kcal/d and 20 fat%; change in fat% intake was used for estimation of interaction effects. The main outcomes were intervention weight loss and waist reduction. In the trial, mean change in fat% intake was -12/+4 in the low/high-fat groups. In the replication study, it was -23/-12 among those reducing fat% more/less than the median. TFAP2B-rs987237 genotype AA was associated with 1.0 kg (95% CI, 0.4; 1.6) greater weight loss on the low-fat, and GG genotype with 2.6 kg (1.1; 4.1) greater weight loss on the high-fat (interaction p-value; p = 0.00007). The replication study showed a similar (non-significant) interaction pattern. Waist reduction results generally were similar. Study-strengths include (i) the discovery study randomised trial design combined with the replication opportunity (ii) the strict dietary intake control in both studies (iii) the large sample sizes of both studies. Limitations are (i) the low minor allele frequency of the TFAP2B polymorphism, making it hard to investigate non-additive genetic effects (ii) the different interventions preventing identical replication-discovery study designs (iii) some missing data for non-completers and dietary intake. No adverse effects/outcomes or side-effects were observed. Under energy restriction, TFAP2B may modify the effect of dietary fat intake on weight loss and waist reduction.

  6. A critical study of different Monte Carlo scoring methods of dose average linear-energy-transfer maps calculated in voxelized geometries irradiated with clinical proton beams.

    Science.gov (United States)

    Cortés-Giraldo, M A; Carabe, A

    2015-04-07

    We compare unrestricted dose average linear energy transfer (LET) maps calculated with three different Monte Carlo scoring methods in voxelized geometries irradiated with proton therapy beams with three different Monte Carlo scoring methods. Simulations were done with the Geant4 (Geometry ANd Tracking) toolkit. The first method corresponds to a step-by-step computation of LET which has been reported previously in the literature. We found that this scoring strategy is influenced by spurious high LET components, which relative contribution in the dose average LET calculations significantly increases as the voxel size becomes smaller. Dose average LET values calculated for primary protons in water with voxel size of 0.2 mm were a factor ~1.8 higher than those obtained with a size of 2.0 mm at the plateau region for a 160 MeV beam. Such high LET components are a consequence of proton steps in which the condensed-history algorithm determines an energy transfer to an electron of the material close to the maximum value, while the step length remains limited due to voxel boundary crossing. Two alternative methods were derived to overcome this problem. The second scores LET along the entire path described by each proton within the voxel. The third followed the same approach of the first method, but the LET was evaluated at each step from stopping power tables according to the proton kinetic energy value. We carried out microdosimetry calculations with the aim of deriving reference dose average LET values from microdosimetric quantities. Significant differences between the methods were reported either with pristine or spread-out Bragg peaks (SOBPs). The first method reported values systematically higher than the other two at depths proximal to SOBP by about 15% for a 5.9 cm wide SOBP and about 30% for a 11.0 cm one. At distal SOBP, the second method gave values about 15% lower than the others. Overall, we found that the third method gave the most consistent

  7. Effects of diet composition on postprandial energy availability during weight loss maintenance.

    Directory of Open Access Journals (Sweden)

    Carolyn O Walsh

    Full Text Available BACKGROUND: The major circulating metabolic fuels regulate hunger, and each is affected by dietary composition. An integrated measure of postprandial energy availability from circulating metabolic fuels may help inform dietary recommendations for weight maintenance after weight loss. AIM: We examined the effect of low-fat (LF, 60% of energy from carbohydrate, 20% fat, 20% protein, low-glycemic index (LGI, 40%-40%-20%, and very low-carbohydrate (VLC, 10%-60%-30% diets on total postprandial metabolic fuel energy availability (EA during weight loss maintenance. METHODS: Eight obese young adults were fed a standard hypocaloric diet to produce 10-15% weight loss. They were then provided isocaloric LF, LGI, and VLC diets in a randomized crossover design, each for a 4-week period of weight loss maintenance. At the end of each dietary period, a test meal representing the respective diet was provided, and blood samples were obtained every 30 minutes for 5 hours. The primary outcome was EA, defined as the combined energy density (circulating level × relative energy content of glucose, free fatty acids, and β-hydroxybutyrate. Secondary outcomes were individual metabolic fuels, metabolic rate, insulin, glucagon, cortisol, epinephrine, and hunger ratings. Respiratory quotient was a process measure. Data were analyzed by repeated-measures analysis of variance, with outcomes compared in the early (30 to 150 min and late (180 to 300 min postprandial periods. RESULTS: EA did not differ between the test meals during the early postprandial period (p = 0.99. However, EA in the late postprandial period was significantly lower after the LF test meal than the LGI (p<0.0001 and VLC (p<0.0001 test meals. Metabolic rate also differed in the late postprandial period (p = 0.0074, with higher values on the VLC than LF (p = 0.0064 and LGI (p = 0.0066 diets. CONCLUSION: These findings suggest that an LF diet may adversely affect postprandial EA and risk for weight regain

  8. Cluster model calculation of N near K-edge energy-loss fine structures in hexagonal GaN crystal

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A cluster model is used to calculate electron energy-loss fine structures in crystal. The multiple-scattering self-consistent-field method is employed in the calculation. Our theoretical results of N near K-edge energy loss fine structures in hexagonal GaN crystal are in good agreement with the experimental spectra. Future possible experiments in energy-filtered transmission electron microscopy (EFTEM) are discussed and proposed because our theoretical work can provide clear assignments for transmitted electrons with different energy losses.

  9. Quantitative trait loci for energy balance traits in an advanced intercross line derived from mice divergently selected for heat loss

    Directory of Open Access Journals (Sweden)

    Larry J. Leamy

    2014-05-01

    Full Text Available Obesity in human populations, currently a serious health concern, is considered to be the consequence of an energy imbalance in which more energy in calories is consumed than is expended. We used interval mapping techniques to investigate the genetic basis of a number of energy balance traits in an F11 advanced intercross population of mice created from an original intercross of lines selected for increased and decreased heat loss. We uncovered a total of 137 quantitative trait loci (QTLs for these traits at 41 unique sites on 18 of the 20 chromosomes in the mouse genome, with X-linked QTLs being most prevalent. Two QTLs were found for the selection target of heat loss, one on distal chromosome 1 and another on proximal chromosome 2. The number of QTLs affecting the various traits generally was consistent with previous estimates of heritabilities in the same population, with the most found for two bone mineral traits and the least for feed intake and several body composition traits. QTLs were generally additive in their effects, and some, especially those affecting the body weight traits, were sex-specific. Pleiotropy was extensive within trait groups (body weights, adiposity and organ weight traits, bone traits and especially between body composition traits adjusted and not adjusted for body weight at sacrifice. Nine QTLs were found for one or more of the adiposity traits, five of which appeared to be unique. The confidence intervals among all QTLs averaged 13.3 Mb, much smaller than usually observed in an F2 cross, and in some cases this allowed us to make reasonable inferences about candidate genes underlying these QTLs. This study combined QTL mapping with genetic parameter analysis in a large segregating population, and has advanced our understanding of the genetic architecture of complex traits related to obesity.

  10. From electron energy-loss spectroscopy to multi-dimensional and multi-signal electron microscopy.

    Science.gov (United States)

    Colliex, Christian

    2011-01-01

    This review intends to illustrate how electron energy-loss spectroscopy (EELS) techniques in the electron microscope column have evolved over the past 60 years. Beginning as a physicist tool to measure basic excitations in solid thin foils, EELS techniques have gradually become essential for analytical purposes, nowadays pushed to the identification of individual atoms and their bonding states. The intimate combination of highly performing techniques with quite efficient computational tools for data processing and ab initio modeling has opened the way to a broad range of novel imaging modes with potential impact on many different fields. The combination of Angström-level spatial resolution with an energy resolution down to a few tenths of an electron volt in the core-loss spectral domain has paved the way to atomic-resolved elemental and bonding maps across interfaces and nanostructures. In the low-energy range, improved energy resolution has been quite efficient in recording surface plasmon maps and from them electromagnetic maps across the visible electron microscopy (EM) domain, thus bringing a new view to nanophotonics studies. Recently, spectrum imaging of the emitted photons under the primary electron beam and the spectacular introduction of time-resolved techniques down to the femtosecond time domain, have become innovative keys for the development and use of a brand new multi-dimensional and multi-signal electron microscopy.

  11. Methane output of tortoises: its contribution to energy loss related to herbivore body mass.

    Directory of Open Access Journals (Sweden)

    Ragna Franz

    Full Text Available An increase in body mass (M is traditionally considered advantageous for herbivores in terms of digestive efficiency. However, recently increasing methane losses with increasing M were described in mammals. To test this pattern in non-mammal herbivores, we conducted feeding trails with 24 tortoises of various species (M range 0.52-180 kg fed a diet of grass hay ad libitum and salad. Mean daily dry matter and gross energy intake measured over 30 consecutive days scaled to M(0.75 (95%CI 0.64-0.87 and M(0.77 (95%CI 0.66-0.88, respectively. Methane production was measured over two consecutive days in respiration chambers and scaled to M(1.03 (95%CI 0.84-1.22. When expressed as energy loss per gross energy intake, methane losses scaled to 0.70 (95%CI 0.47-1.05 M(0.29 (95%CI 0.14-0.45. This scaling overlaps in its confidence intervals to that calculated for nonruminant mammals 0.79 (95%CI 0.63-0.99 M(0.15 (95%CI 0.09-0.20, but is lower than that for ruminants. The similarity between nonruminant mammals and tortoises suggest a common evolution of the gut fauna in ectotherms and endotherms, and that the increase in energetic losses due to methane production with increasing body mass is a general allometric principle in herbivores. These findings add evidence to the view that large body size itself does not necessarily convey a digestive advantage.

  12. Measurement of reaction cross-sections for 89Y at average neutron energies of 7.24-24.83 MeV

    Science.gov (United States)

    Zaman, Muhammad; Kim, Guinyun; Naik, Haladhara; Kim, Kwangsoo; Shahid, Muhammad

    2015-05-01

    We measured neutron-induced reaction cross-sections for 89Y(n,γ)90mY and 89Y(n,α)86Rb reactions with the average neutron energy region from 7.45 to 24.83 MeV by an activation and off-line γ-ray spectrometric technique using the MC-50 Cyclotron at Korea Institute of Radiological and Medical Sciences. The neutron-induced reaction cross-sections of 89Y as a function of neutron energy were taken from the TENDL-2013 library. The flux-weighted average cross-sections for 89Y(n,γ)90mY and 89Y(n,α)86Rb reactions were calculated from the TENDL-2013 values based on mono-energetic neutron and by using the neutron energy spectrum from MCNPX 2.6.0 code. The present results are compared with the flux-weighted values of TENDL-2013 and are found to be in good agreement

  13. Average transverse momenta of baryon production at p-p collider experiments and their crucial implications for the high energy hadroproduction physics

    CERN Document Server

    Piskounova, Olga I

    2016-01-01

    The phenomenological approach in the framework of Quark-Gluon String Model (QGSM) has been applied to the description of transverse momentum spectra for the various sorts of baryons in hadroproduction at colliders. The analysis of data on hyperon transverse momentum distributions,dN/dp_t, demonstrates a difference in the dynamics of multiparticle production in proton-proton vs. antiproton-proton collisions in the region of low p_t . The most important contribution in antip-p reaction goes from fragmentation of antidiquark-diquark side of pomeron diagram. The complete study of the energy dependence of average transverse momenta for the energies from sqrt(s)= 0.2 to 7. TeV shows the slight growing of with energy. No dramatic changes were seen on the range from Tevatron to LHC, which may be responsible for "knee" in the cosmic ray proton spectra. The average transverse momentum analysis through the different mass of hadrons reveals some regularity in the mass gaps between the hadron generations. This observatio...

  14. High resolution electron energy loss spectroscopy of narrow gap III-V semiconductor surfaces and interfaces

    CERN Document Server

    Veal, T D

    2002-01-01

    The electronic properties of n-type narrow gap III-V semiconductor surfaces and interfaces are investigated using high-resolution electron-energy-loss spectroscopy (HREELS). Changing the incident electron energy, alters the wave-vector transfer parallel to the surface, allowing the probing depth to be varied over typical space-charge layer widths (100 - 2000 A). Semi-classical dielectric theory simulations of the HREEL spectra are performed to extract quantitative information from the probing energy-dependence of the surface plasmon and phonon peaks. The plasma frequency used in the simulations is related to the electron concentration and effective mass using the Kane model of the non-parabolic conduction band. Space-charge layer parameters are obtained by comparing calculated smooth charge profiles with the histogram profiles that are used in the simulations. Complementary experimental techniques are employed to correlate the reconstruction, chemical composition and morphology of the surface with the electro...

  15. The effect of electronic energy loss on irradiation-induced grain growth in nanocrystalline oxides.

    Science.gov (United States)

    Zhang, Yanwen; Aidhy, Dilpuneet S; Varga, Tamas; Moll, Sandra; Edmondson, Philip D; Namavar, Fereydoon; Jin, Ke; Ostrouchov, Christopher N; Weber, William J

    2014-05-07

    Grain growth of nanocrystalline materials is generally thermally activated, but can also be driven by irradiation at much lower temperature. In nanocrystalline ceria and zirconia, energetic ions deposit their energy to both atomic nuclei and electrons. Our experimental results have shown that irradiation-induced grain growth is dependent on the total energy deposited, where electronic energy loss and elastic collisions between atomic nuclei both contribute to the production of disorder and grain growth. Our atomistic simulations reveal that a high density of disorder near grain boundaries leads to locally rapid grain movement. The additive effect from both electronic excitation and atomic collision cascades on grain growth demonstrated in this work opens up new possibilities for controlling grain sizes to improve functionality of nanocrystalline materials.

  16. The Effect Of Electronic Energy Loss On Irradiation-induced Grain Growth In Nanocrystalline Oxides

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanwen; Aidhy, Dilpuneet S.; Varga, Tamas; Moll, Sandra; Edmondson, Philip D.; Namavar, Fereydoon; Jin, Ke; Ostrouchov, Christopher N.; Weber, William J.

    2014-03-03

    Grain growth of nanocrystalline materials is generally thermally activated, but can also be driven by irradiation at much lower temperature. In nanocrystalline ceria and zirconia, energetic ions deposit their energy to both atomic nuclei and electrons. Our experimental results have shown that irradiationinduced grain growth is dependent on the total energy deposited, where electronic energy loss and elastic collisions between atomic nuclei both contribute to the production of disorder and grain growth. Our atomistic simulations reveal that a high density of disorder near grain boundaries leads to locally rapid grain movement. The additive effect from both electronic excitation and atomic collision cascades on grain growth demonstrated in this work opens up new possibilities for controlling grain sizes to improve functionality of nanocrystalline materials.

  17. Optimal Energy Management for a Complex Hybrid Electric Vehicle:Tolerating Power-loss of Motor

    Institute of Scientific and Technical Information of China (English)

    ZHANG Pei-zhi; YIN Cheng-liang; ZHANG Yong; WU Zhi-wei

    2009-01-01

    The energy management may perform well under normal conditions, but may lead to poor behavior under abnormal situations. To tackle this problem, an optimal control strategy called rule-based equivalent fuel consumption minimization strategy (RECMS) is developed for a new complex hybrid electric vehicle (CHEV).It optimizes the energy efficiency and drive performance to cater for normal and power-loss operations of the tractive motor. Firstly, the strategy formulates a novel objective function based on the equivalent fuel concept.By accounting for the actual fuel cost, the equivalent fuel cost for the electric machines and virtual fuel cost for the drivability, the cost function is obtained. Furthermore, some penalty factors are presented to optimize the performance target. Finally, experiments for a practical CHEV are performed to validate a simulation model.Then simulations are carried out for both rule-based and RECMS. The results show that the optimal energy management is working well.

  18. Reduction in tribological energy losses in the transportation and electric utilities sectors

    Energy Technology Data Exchange (ETDEWEB)

    Pinkus, O.; Wilcock, D.F.; Levinson, T.M.

    1985-09-01

    This report is part of a study of ways and means of advancing the national energy conservation effort, particularly with regard to oil, via progress in the technology of tribology. The report is confined to two economic sectors: transportation, where the scope embraces primarily the highway fleets, and electric utilities. Together these two sectors account for half of the US energy consumption. Goal of the study is to ascertain the energy sinks attributable to tribological components and processes and to recommend long-range research and development (R and D) programs aimed at reducing these losses. In addition to the obvious tribological machine components such as bearings, piston rings, transmissions and so on, the study also extends to processes which are linked to tribology indirectly such as wear of machine parts, coatings of blades, high temperature materials leading to higher cycle efficiencies, attenuation of vibration, and other cycle improvements.

  19. Steady-state energy balance in animal models of obesity and weight loss.

    Science.gov (United States)

    Olsen, Magnus Kringstad; Johannessen, Helene; Cassie, Nikki; Barrett, Perry; Takeuchi, Koji; Kulseng, Bård; Chen, Duan; Zhao, Chun-Mei

    2017-04-01

    We wanted to exam the steady-state energy balance by using high-fat diet-induced obese (DIO) rats and mice as models for positive energy balance, and gastric bypassed (GB) rats and gene knockout of muscarinic acetylcholine M3 receptor (M3KO) mice as models for negative energy balance. One hundred and thirty-two rats and mice were used. Energy balance was measured by a comprehensive laboratory animal monitoring system. Gene expression was analysed by in situ hybridisation in M3KO mice. DIO rats reached the plateau of body weight 28 weeks after starting high-fat diet (25% heavier than controls), whereas DIO mice reached the plateau after 6 weeks (23% heavier than controls). At the plateau, DIO rats had higher calorie intake during the light phase but not during the dark phase, while mice had the same calorie intake per day as controls. DIO rats and mice had lower energy expenditure (EE) and respiratory exchange ratio (RER) than controls. GB-rats reached the plateau (15% weight loss) 2 weeks after surgery and had the same calorie intake as sham-operated controls. EE, but not RER, was higher in GB rats than controls during the dark phase. The lean M3KO mice (25% lighter than wild-type (WT) mice at the plateau between 6 and 15 months of age) had the same calorie intake but higher EE, RER and hypothalamic mRNA expression of NPY, AgRP and leptin receptor than WT mice. When body weight gain or loss reached a plateau, the steady-state energy balance was mainly maintained by EE and/or RER rather than calorie intake.

  20. Differential oscillator strengths for chlorine dioxide, OClO, produced by electron impact energy-loss spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Davies, J.A.; Mason, N.J. [University Coll., London (United Kingdom). Dept. of Physics and Astronomy; Marston, G.; Wayne, R.P. [Oxford Univ. (United Kingdom). Physical Chemistry Lab.

    1995-09-28

    Electron impact spectroscopy has been used for the first time to obtain energy-loss spectra for chlorine dioxide, OC10, over an energy range 2.5 {yields} 12.5 eV. The differential oscillator strength (DOS) obtained from the energy-loss spectrum is compared with the DOS obtained from optical measurements. Oscillator strengths for several transitions have been calculated from a summation of the DOS and comparisons are also made with previous optical data. (author).

  1. High resolution electron energy loss spectroscopy of clean and hydrogen covered Si(001) surfaces: first principles calculations.

    Science.gov (United States)

    Patterson, C H

    2012-09-07

    Surface phonons, conductivities, and loss functions are calculated for reconstructed (2×1), p(2×2) and c(4×2) clean Si(001) surfaces, and (2×1) H and D covered Si(001) surfaces. Surface conductivities perpendicular to the surface are significantly smaller than conductivities parallel to the surface. The surface loss function is compared to high resolution electron energy loss measurements. There is good agreement between calculated loss functions and experiment for H and D covered surfaces. However, agreement between experimental data from different groups and between theory and experiment is poor for clean Si(001) surfaces. Formalisms for calculating electron energy loss spectra are reviewed and the mechanism of electron energy losses to surface vibrations is discussed.

  2. Quenching of high-pT hadrons: a non-energy-loss scenario

    Directory of Open Access Journals (Sweden)

    Kopeliovich B. Z.

    2014-04-01

    Full Text Available A parton produced with a high transverse momentum in a hard collision is regenerating its color field, intensively radiating gluons and losing energy. This process cannot last long, if it ends up with production of a leading hadron carrying the main fraction zh of the initial parton momentum. So energy conservation imposes severe constraints on the length scale of production of a single hadron with high pT . As a result, the main reason for hadron quenching observed in heavy ion collision is not energy loss, but attenuation of the produced colorless dipole in the created dense medium. The latter mechanism, calculated with the path-integral methods, explains well the observed suppression of light hadrons and elliptic flow in a wide range of energies, from the lowest energy of RHIC up to LHC, and in a wide range of transverse momenta. The values of the transport coefficient extracted from data range within 1-2 GeV2/fm, dependent on energy, so agree well with the theoretical expectations.

  3. The applications of in situ electron energy loss spectroscopy to the study of electron beam nanofabrication.

    Science.gov (United States)

    Chen, Shiahn J; Howitt, David G; Gierhart, Brian C; Smith, Rosemary L; Collins, Scott D

    2009-06-01

    An in situ electron energy loss spectroscopy (EELS) technique has been developed to investigate the dynamic processes associated with electron-beam nanofabrication on thin membranes. In this article, practical applications germane to e-beam nanofabrication are illustrated with a case study of the drilling of nanometer-sized pores in silicon nitride membranes. This technique involves successive acquisitions of the plasmon-loss and the core-level ionization-loss spectra in real time, both of which provide the information regarding the hole-drilling kinetics, including two respective rates for total mass loss, individual nitrogen and silicon element depletion, and the change of the atomic bonding environment. In addition, the in situ EELS also provides an alternative method for endpoint detection with a potentially higher time resolution than by imaging. On the basis of the time evolution of in situ EELS spectra, a qualitative working model combining knock-on sputtering, irradiation-induced mass transport, and phase separation can be proposed.

  4. Electron Energy-Loss Spectroscopy Theory and Simulation Applied to Nanoparticle Plasmonics

    Science.gov (United States)

    Bigelow, Nicholas Walker

    In this dissertation, the capacity of electron energy-loss spectroscopy (EELS) to probe plasmons is examined in detail. EELS is shown to be able to detect both electric hot spots and Fano resonances in contrast to the prevailing knowledge prior to this work. The most detailed examination of magnetoplasmonic resonances in multi-ring structures to date and the utility of electron tomography to computational plasmonics is explored, and a new tomographic method for the reconstruction of a target is introduced. Since the observation of single-molecule surface-enhanced Raman scattering (SMSERS) in 1997, questions regarding the nature of the electromagnetic hot spots responsible for such observations still persist. A computational analysis of the electron- and photon-driven surface-plasmon resonances of monomer and dimer metal nanorods is presented to elucidate the differences and similarities between the two excitation mechanisms in a system with well understood optical properties. By correlating the nanostructure's simulated electron energy loss spectrum and loss-probability maps with its induced polarization and scattered electric field we discern how certain plasmon modes are selectively excited and how they funnel energy from the excitation source into the near- and far-field. Using a fully retarded electron-scattering theory capable of describing arbitrary three-dimensional nanoparticle geometries, aggregation schemes, and material compositions, we find that electron energy-loss spectroscopy (EELS) is able to indirectly probe the same electromagnetic hot spots that are generated by an optical excitation source. EELS is then employed in a scanning transmission electron microscope (STEM) to obtain maps of the localized surface plasmon modes of SMSERS-active nanostructures, which are resolved in both space and energy. Single-molecule character is confirmed by the bianalyte approach using two isotopologues of Rhodamine 6G. The origins of this observation are explored

  5. Stopping powers and energy loss straggling for (0.9-3.4) MeV protons in a kapton polyimide thin film

    Science.gov (United States)

    Damache, S.; Djaroum, S.; Ouichaoui, S.; Amari, L.; Moussa, D.

    2016-09-01

    The energy loss and energy loss straggling widths have been measured in transmission for Ep ≈ (0.9-3.4) MeV protons traversing a thin kapton polyimide foil. In a prior step, the thickness and non-uniformity of the target foil were carefully investigated. The overall relative uncertainties in the stopping power and energy loss straggling variance data amount, respectively, to less than 2% and 8%. The S(E) experimental data show to be in excellent agreement with available previous ones and with those compiled in the ICRU-49 report. They are fully consistent with the predictions of Sigmund-Schinner's binary collision theory of electronic stopping over the whole proton energy range explored. An average deviation of ∼2.5% relative to values calculated by the SRIM-2008 code, likely due to effects of valence electrons involving the Csbnd H, Cdbnd C and Cdbnd O bonds, is however observed at low proton velocities. The measured energy loss straggling data, which are unique to our knowledge, are found to be in good agreement with values derived by the classical Bohr formula for Ep ≳ 1300 keV but they significantly exceed Bohr's collisional energy loss straggling at lower proton velocities where target electrons can no longer be considered as free. They also show to be consistent with the predictions of the Bethe-Livingston and Sigmund-Schinner theories over the low proton velocity region (Ep 1300 keV, while deviations above the latter amounting up to ∼18% are observed at lower proton velocities.

  6. High-energy resolution electron energy-loss spectroscopy study of interband transitions characteristic to single-walled carbon nanotubes.

    Science.gov (United States)

    Sato, Yohei; Terauchi, Masami

    2014-06-01

    An electron energy-loss spectroscopic (EELS) study using a monochromator transmission electron microscope was conducted for investigating the dielectric response of isolated single-walled carbon nanotubes (SWCNTs) owing to interband transitions characteristic to chiral structures. Individual chiral structures of the SWCNTs were determined by electron diffraction patterns. EELS spectra obtained from isolated SWCNTs showed sharp peaks below π plasmon energy of 5 eV, which were attributed to the characteristic interband transitions of SWCNTs. In addition, unexpected shoulder structures were observed at the higher energy side of each sharp peak. Simulations of EELS spectra by using the continuum dielectric theory showed that an origin of the shoulder structures was because of the surface dipole mode along the circumference direction of the SWCNT. It was noticed that the electron excitation energies obtained by EELS were slightly higher than those of optical studies, which might be because of the inelastic scattering process with the momentum transfers. To interpret the discrepancy between the EELS and optical experiments, it is necessary to conduct more accurate simulation including the first principle calculation for the band structure of SWCNTs.

  7. Surface effects in the energy loss of ions passing through a thin foil

    Energy Technology Data Exchange (ETDEWEB)

    Osma, J. [Departamento de Fisica de Materiales, Facultad de Ciencias Quimicas, Universidad del Pais Vasco/Euskal Herriko Unibertsitatea, Apartado 1072, 20080, San Sebastian (Spain); Garcia de Abajo, F.J. [Departamento de Ciencias de la Computacion e Inteligencia Artificial, Facultad de Informatica, Universidad del Pais Vasco/Euskal Herriko Unibertsitatea, Apartado 649, 20080, San Sebastian (Spain)

    1997-09-01

    The role of surface plasmon excitation in the interaction of ions passing through thin films has been studied in both the Bloch hydrodynamic approximation and the local response approach for projectile velocities above the maximum of the stopping power curve. The effect of the surface is found to be much weaker when the dispersion of the modes is taken into consideration than in the case of nondispersive media, though qualitatively the main features of the hydrodynamic approach resemble those of the local one. A generalization of the Bothe-Landau convolution formula for the loss probability distribution is derived to take into account the scattering due to the surface. The effects of the surface in the energy-loss spectra are discussed. A comparison with experiment is given. {copyright} {ital 1997} {ital The American Physical Society}

  8. Terbium gallium garnet ceramic-based Faraday isolator with compensation of thermally induced depolarization for high-energy pulsed lasers with kilowatt average power

    Science.gov (United States)

    Yasuhara, Ryo; Snetkov, Ilya; Starobor, Alexey; Palashov, Oleg

    2014-12-01

    A scalable aperture Faraday isolator for high-energy pulsed lasers with kW-level average power was demonstrated using terbium gallium garnet ceramics with water cooling and compensation of thermally induced depolarization in a magnetic field. An isolation ratio of 35 dB (depolarization ratio γ of 3.4 × 10-4) was experimentally observed at a maximum laser power of 740 W. By using this result, we estimated that this isolator maintains an isolation ratio of 30 dB for laser powers of up to 2.7 kW. Our results provide the solution for achieving optical isolation in high-energy (100 J to kJ) laser systems with a repetition rate greater than 10 Hz.

  9. Electron energy-loss spectroscopy of coupled plasmonic systems: beyond the standard electron perspective

    Science.gov (United States)

    Bernasconi, G. D.; Flauraud, V.; Alexander, D. T. L.; Brugger, J.; Martin, O. J. F.; Butet, J.

    2016-09-01

    Electron energy-loss spectroscopy (EELS) has become an experimental method of choice for the investigation of localized surface plasmon resonances, allowing the simultaneous mapping of the associated field distributions and their resonant energies with a nanoscale spatial resolution. The experimental observations have been well-supported by numerical models based on the computation of the Lorentz force acting on the impinging electrons by the scattered field. However, in this framework, the influence of the intrinsic properties of the plasmonic nanostructures studied with the electron energy-loss (EEL) measurements is somehow hidden in the global response. To overcome this limitation, we propose to go beyond this standard, and well-established, electron perspective and instead to interpret the EELS data using directly the intrinsic properties of the nanostructures, without regard to the force acting on the electron. The proposed method is particularly well-suited for the description of coupled plasmonic systems, because the role played by each individual nanoparticle in the observed EEL spectrum can be clearly disentangled, enabling a more subtle understanding of the underlying physical processes. As examples, we consider different plasmonic geometries in order to emphasize the benefits of this new conceptual approach for interpreting experimental EELS data. In particular, we use it to describe results from samples made by traditional thin film patterning and by arranging colloidal nanostructures.

  10. Strong-coupling Jet Energy Loss from AdS/CFT

    CERN Document Server

    Morad, R

    2014-01-01

    We propose a novel definition of a holographic light hadron jet and consider the phenomenological consequences, including the very first fully self-consistent, completely strong-coupling calculation of the jet nuclear modification factor $R_{AA}$, which we find compares surprisingly well with recent preliminary data from LHC. We show that the thermalization distance for light parton jets is an extremely sensitive function of the \\emph{a priori} unspecified string initial conditions and that worldsheets corresponding to non-asymptotic energy jets are not well approximated by a collection of null geodesics. Our new string jet prescription, which is defined by a separation of scales from plasma to jet, leads to the re-emergence of the late-time Bragg peak in the instantaneous jet energy loss rate; unlike heavy quarks, the energy loss rate is unusually sensitive to the very definition of the string theory object itself. A straightforward application of the new jet definition leads to significant jet quenching, ev...

  11. Short path length pQCD corrections to energy loss in the quark gluon plasma

    CERN Document Server

    Kolbe, Isobel

    2015-01-01

    Recent surprising discoveries of collective behaviour of low-$p_T$ particles in $pA$ collisions at LHC hint at the creation of a hot, fluid-like QGP medium. The seemingly conflicting measurements of non-zero particle correlations and $R_{pA}$ that appears to be consistent with unity demand a more careful analysis of the mechanisms at work in such ostensibly minuscule systems. We study the way in which energy is dissipated in the QGP created in $pA$ collisions by calculating, in pQCD, the short separation distance corrections to the well-known DGLV energy loss formulae that have produced excellent predictions for $AA$ collisions. We find that, shockingly, due to the large formation time (compared to the $1/\\mu$ Debye screening length) assumption that was used in the original DGLV calculation, a highly non-trivial cancellation of correction terms results in a null short path length correction to the DGLV energy loss formula. We investigate the effect of relaxing the large formation time assumption in the final ...

  12. Electron-energy-loss spectroscopy on group-III nitrides and transition- metal oxides

    CERN Document Server

    Niessner, W

    2000-01-01

    A main topic represent electron-energy-loss spectroscopy (EELS) studies of the group-III nitrides AlN, GaN, InN, as well as their mixing systems Al sub x Ga sub 1 sub - sub x N, In sub x Ga sub 1 sub - sub x N. In EELS measurements with excitation energies above 1 keV clear collective excitations in AlN at 21 eV and in GaN at 15 eV were observed. In the mixing system Al sub x Ga sub 1 sub - sub x M a 2-mode behaviour is observed. Up to x=0.2 a GaN-like excitation remains preserved, while from x=0.44 the eigenfrequency of a AlN-like resonance shifts continuously. With vanadium dioxide a d sup 1 transition metal oxide was studied, which passes at 68 C a semiconductor-metal transition. In the EELS valence band spectra beside band transitions from the O2p subsigma and O2p subpi band an intense signal with a loss energy of 1 eV occurs. EELS studies on W- and F-doped VO sub 2 show, that it deals with a band transition from the V3d into the pd subpi band. EELS studies were for the first time also performed at lead t...

  13. Dairy-Rich Diets Augment Fat Loss on an Energy-Restricted Diet: A Multicenter Trial

    Directory of Open Access Journals (Sweden)

    Michael B. Zemel

    2009-09-01

    Full Text Available A 12-week randomized controlled multi-center clinical trial was conducted in 106 overweight and obese adults. Diets were designed to produce a 2,093 kJ/day energy deficit with either low calcium (LC; ~600 mg/day, high calcium (HC; ~1,400 mg/day, or high dairy (HD; three dairy servings, diet totaling ~1,400 mg/day. Ninety-three subjects completed the trial, and 68 met all a priori weekly compliance criteria. Both HC and HD contained comparable levels of calcium, but HC was only ~30% as effective as HD in suppressing 1,25-(OH2D and exerted no significant effects on weight loss or body composition compared to LC. In the group that met compliance criteria, HD resulted in ~two-fold augmentation of fat loss compared to LC and HC (HD: -4.43 ± 0.53 kg; LC: -2.69 ± 0.0.53 kg; HC: -2.23 ± 0.73kg, p < 0.025; assessment of all completers and an intent-to-treat analysis produced similar trends. HD augmentated central (trunk fat loss (HD: -2.38 ± 0.30 kg; HC: -1.42 ± 0.30 kg; LC: -1.36 ± 0.42 kg, p < 0.05 and waist circumference (HD: -7.65 ± 0.75 cm; LC: -4.92 ± 0.74 cm; LC: -4.95 ± 1.05 cm, p < 0.025. Similar effects were noted among all subjects completing the study and in an intent-to-treat analysis. These data indicate that dairy-rich diets augment weight loss by targeting the fat compartment during energy restriction.

  14. Reflection electron energy-loss spectra of the fullerenes C[sub 60] and C[sub 70

    Energy Technology Data Exchange (ETDEWEB)

    Shul' ga, Yu.M. (Institute of Chemical Physics, Chernogolovka (Russian Federation)); Rubtsov, V.I. (Institute of Chemical Physics, Chernogolovka (Russian Federation)); Lobach, A.S. (Institute of Chemical Physics, Chernogolovka (Russian Federation))

    1994-02-01

    High purity polycrystalline samples of C[sub 60] and C[sub 70] were obtained and studied by the electron energy-loss spectroscopy in the reflection mode. The spectra were used for determination of the loss functions of fullerenes. Loss functions of the fullerenes were compared with those of graphite. It was established that the relative intensities of the peaks corresponding to ([sigma]+[pi])- and [pi]-plasmons depended on the primary electron energy, while the ([sigma]+[pi])-plasmon energies did not depend on the primary electron energy and were equal to 25.0 eV for C[sub 60] and 24.8 eV for C[sub 70]. The conclusion on the space localization for plasma occilations in fullerenes was made on the base of the study of the energy dependent loss functions. (orig.)

  15. 家用太阳能热水系统平均热损因数数值的探讨%Probe into Numerical Value of Domestic Solar Water Heating Systems Average Heat Loss Factor

    Institute of Scientific and Technical Information of China (English)

    肖红升

    2012-01-01

    GB/T 19141-2011家用太阳能热水系统技术条件国家标准已于2012年8月1日起实施.该标准规定平均热损因数数值保留至个位数.这一要求对开展实验室间比对、实施GB 26969-2011等带来一些困惑.本文通过对就平均热损因数开展实验室间比对和能效系数计算、能效等级判定等展开探讨,找出了不合理的原因,得出了将平均热损因数数值保留一位小数可以提高该标准的严谨性,有效化解一些矛盾的研究结论.%The national standard named as GB/T19141-2011 specification of domestic solar water heating systems has already been put into effect since August 1, 2012, which stipulates that numerical value of average heat loss factor is accurate to the digit. This demand brings some confusion to doing comparison between laboratories as well as carrying out GB26969-2011. This paper conducts a series of discussions about carrying out comparison between laboratories on average heat loss factor, calculating the coefficient of thermal performance and judging the grade of thermal performance, finding out the reason of its irrationality. The conclusion is reached that numerical value of average heat loss factor being accurate to the first decimal place can enhance the conscientiousness of the this standard and thus solve some contradictions.

  16. The adaptive metabolic response to exercise-induced weight loss influences both energy expenditure and energy intake.

    Science.gov (United States)

    Hopkins, M; Gibbons, C; Caudwell, P; Hellström, P M; Näslund, E; King, N A; Finlayson, G; Blundell, J E

    2014-05-01

    A decline in resting energy expenditure (REE) beyond that predicted from changes in body composition has been noted following dietary-induced weight loss. However, it is unknown whether a compensatory downregulation in REE also accompanies exercise (EX)-induced weight loss, or whether this adaptive metabolic response influences energy intake (EI). Thirty overweight and obese women (body mass index (BMI)=30.6±3.6 kg/m(2)) completed 12 weeks of supervised aerobic EX. Body composition, metabolism, EI and metabolic-related hormones were measured at baseline, week 6 and post intervention. The metabolic adaptation (MA), that is, difference between predicted and measured REE was also calculated post intervention (MApost), with REE predicted using a regression equation generated in an independent sample of 66 overweight and obese women (BMI=31.0±3.9 kg/m(2)). Although mean predicted and measured REE did not differ post intervention, 43% of participants experienced a greater-than-expected decline in REE (-102.9±77.5 kcal per day). MApost was associated with the change in leptin (r=0.47; P=0.04), and the change in resting fat (r=0.52; P=0.01) and carbohydrate oxidation (r=-0.44; P=0.02). Furthermore, MApost was also associated with the change in EI following EX (r=-0.44; P=0.01). Marked variability existed in the adaptive metabolic response to EX. Importantly, those who experienced a downregulation in REE also experienced an upregulation in EI, indicating that the adaptive metabolic response to EX influences both physiological and behavioural components of energy balance.

  17. Study of the Dielectric Function of Graphene from Spectroscopic Ellipsometry and Electron Energy Loss Spectroscopy

    Science.gov (United States)

    Nelson, Florence

    For more than 60 years, semiconductor research has been advancing up the periodic table. The first transistor was made from germanium. This later gave way to silicon-based devices due to the latter's ability to form an excellent interface with thermally-grown oxide. Now for the last ˜8 years, the focus has moved up one more row to carbon for post-CMOS devices in order to comply with the scaling limitations of Moore's law. However, for each of these, the measurements of film properties and dimensions have always been required for technological applications. These measurement methods often incorporate the use of light or electrons in order to take advantage of a wavelength that is on the order of, or smaller than, the feature sizes of interest. This thesis compares the dielectric function of graphene measured by an optical method to that obtained from an electron energy loss method in order to observe the effect of contamination and substrate on the optical properties of graphene exposed to the environment. Whether viewed in terms of how light affects a material (dielectric function) or how a material affects light (refractive index), the optical response is a quantity that may be used to obtain information about a film's thickness, energy structure, and the types of excitations that are responsible for energy loss. The three main experimental methods used in this thesis work are spectroscopic ellipsometry (SE), scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). SE is commonly used in clean-room environments for optical measurement over the energy range of ˜0-5 eV. This method is used to study graphene's dielectric function from the ultraviolet (UV) through infrared (IR) regions through use of an oscillator dispersion model. A nearly constant absorbance over the IR and into the visible region is observed due to vertical transitions between graphene's linearly dispersed pi-bands at the Dirac points. An exciton

  18. Transformation optics: a time- and frequency-domain analysis of electron-energy loss spectroscopy

    CERN Document Server

    Kraft, Matthias; Pendry, J B

    2016-01-01

    Electron energy loss spectroscopy (EELS) and Cathodoluminescence (CL) play a pivotal role in many of the cutting edge experiments in plasmonics. EELS and CL experiments are usually supported by numerical simulations, which, whilst accurate, may not provide as much physical insight as analytical calculations do. Fully analytical solutions to EELS and CL systems in plasmonics are rare and difficult to obtain. This paper aims to narrow this gap by introducing a new method based on Transformation optics that allows to calculate the quasi-static frequency and time-domain response of plasmonic particles under electron beam excitation.

  19. Multiple scattering and energy loss in semi-inclusive deeply inelastic eA scattering

    CERN Document Server

    Guo, Xiaofeng

    2007-01-01

    We calculate the multiple scattering effect on single hadron production in semi-inclusive lepton-nucleus deeply inelastic scattering. We show that the quantum interference of multiple scattering amplitudes leads to suppression in hadron productions. At the leading power in medium length, the suppression can be approximately expressed in terms of a shift in $z$ of the fragmentation function $D(z)$, and could be therefore interpreted as the collisional energy loss. We compare our calculation with existing experimental data. We also discuss the effect of quark mass on the suppression. Our approach can be extended to other observables in hadronic collisions.

  20. A survey of energy loss calculations for heavy ions between 1 and 100 keV

    CERN Document Server

    Mangiarotti, A; Benabderrahmane, M L; Chepel, V Yu; Lindote, A; Cunha, J P; Sona, P

    2007-01-01

    The original Lindhard-Scharff-Schi{\\o}tt (LSS) theory and the more recent Tilinin theory for calculating the nuclear and electronic stopping powers of slow heavy ions are compared with predictions from the SRIM code by Ziegler. While little discrepancies are present for the nuclear contribution to the energy loss, large differences are found in the electronic one. When full ion recoil cascade simulations are tested against the elastic neutron scattering data available in the literature, it can be concluded that the LSS theory is the more accurate.

  1. Quantification of the boron speciation in alkali borosilicate glasses by electron energy loss spectroscopy

    DEFF Research Database (Denmark)

    Cheng, Shaodong; Yang, Guang; Zhao, Yanqi;

    2015-01-01

    developed a method based on electron energy loss spectroscopy (EELS) data acquisition and analyses, which enables determination of the boron speciation in a series of ternary alkali borosilicate glasses with constant molar ratios. A script for the fast acquisition of EELS has been designed, from which...... fraction in glasses. In addition, the boron speciation of a CeO2 doped potassium borosilicate glass has been analyzed by using the time-resolved EELS spectra. The results clearly demonstrate that the BO4 to BO3 transformation induced by the electron beamirradiation can be efficiently suppressed by doping...

  2. Loss of the liver X receptor LXRα/β in peripheral sensory neurons modifies energy expenditure.

    Science.gov (United States)

    Mansuy-Aubert, Virginie; Gautron, Laurent; Lee, Syann; Bookout, Angie L; Kusminski, Christine; Sun, Kai; Zhang, Yuan; Scherer, Philipp E; Mangelsdorf, David J; Elmquist, Joel K

    2015-06-15

    Peripheral neural sensory mechanisms play a crucial role in metabolic regulation but less is known about the mechanisms underlying vagal sensing itself. Recently, we identified an enrichment of liver X receptor alpha and beta (LXRα/β) in the nodose ganglia of the vagus nerve. In this study, we show mice lacking LXRα/β in peripheral sensory neurons have increased energy expenditure and weight loss when fed a Western diet (WD). Our findings suggest that the ability to metabolize and sense cholesterol and/or fatty acids in peripheral neurons is an important requirement for physiological adaptations to WDs.

  3. The relation between the electron energy loss spectra of hafnia and its dielectric function

    Science.gov (United States)

    Vos, Maarten; Grande, Pedro Luis

    2014-12-01

    Recently two papers have been published deriving the dielectric function from hafnia from electron energy loss data (Jin et al. Applied Physics Letters 100 083713 (2006), Behar et al. Phys. Rev A. 80 062901 (2009)). The obtained dielectric functions are compared in their optical limit and differ considerably. Here we try to clarify the situation by presenting new experimental data and review the analysis procedure used in the earlier work. We conclude that the discrepancy is most likely caused by a shortcoming in the way that the momentum-dependence of the dielectric function is modelled.

  4. Dielectric properties of WS2-coated multiwalled carbon nanotubes studied by energy-loss spectroscopic profiling

    Science.gov (United States)

    Stolojan, Vlad; Silva, S. R. P.; Goringe, Michael J.; Whitby, R. L. D.; Hsu, Wang K.; Walton, D. R. M.; Kroto, Harold W.

    2005-02-01

    We investigate experimentally the electronic properties of the coating for multiwalled carbon nanotubes covered in tungsten disulfide (WS2) of various thicknesses. Coatings of thicknesses between 2 and 8 monolayers (ML) are analyzed using energy-loss spectroscopic profiling (ELSP), by studying the variations in the plasmon excitations across the coated nanotube, as a function of the coating thickness. We find a change in the ELSP for coatings above 5 ML thickness, which we interpret in terms of a change in its dielectric properties.

  5. Application of Electron Energy Loss Spectroscopy for Single Wall Carbon Nanotubes (Review)

    Science.gov (United States)

    Mittal, N.; Jain, S.; Mittal, J.

    2015-03-01

    Electron energy loss spectroscopy (EELS) is among the few techniques that are available for the characterization of modified single wall carbon nanotubes (SWCNTs) having nanometer dimensions (~1-3 nm). CNTs can be modified either by surface functionalization or coating, between bundles of nanotubes by doping, intercalation and fully or partially filling the central core. EELS is an exclusive technique for the identification, composition analysis, and crystallization studies of the chemicals and materials used for the modification of SWCNTs. The present paper serves as a compendium of research work on the application of EELS for the characterization of modified SWCNTs.

  6. A method to determine stratification efficiency of thermal energy storage processes independently from storage heat losses

    DEFF Research Database (Denmark)

    Haller, M.Y.; Yazdanshenas, Eshagh; Andersen, Elsa

    2010-01-01

    A new method for the calculation of a stratification efficiency of thermal energy storages based on the second law of thermodynamics is presented. The biasing influence of heat losses is studied theoretically and experimentally. Theoretically, it does not make a difference if the stratification...... process is in agreement with the first law of thermodynamics. A comparison of the stratification efficiencies obtained from experimental results of charging, standby, and discharging processes gives meaningful insights into the different mixing behaviors of a storage tank that is charged and discharged...

  7. A survey of energy loss calculations for heavy ions between 1 and 100 kev

    Energy Technology Data Exchange (ETDEWEB)

    Mangiarotti, A. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Dept. de Fisica da Universidade de Coimbra, 3004-516 Coimbra (Portugal)], E-mail: alessio@lipc.fis.uc.pt; Lopes, M.I. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Dept. de Fisica da Universidade de Coimbra, 3004-516 Coimbra (Portugal); Departamento de Fisica, Universidade de Coimbra, 3004-516 Coimbra (Portugal); Benabderrahmane, M.L. [Physikalisches Institut der Universitaet Heidelberg, D-69120 Heidelberg (Germany); Chepel, V.; Lindote, A.; Pinto da Cunha, J. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Dept. de Fisica da Universidade de Coimbra, 3004-516 Coimbra (Portugal); Departamento de Fisica, Universidade de Coimbra, 3004-516 Coimbra (Portugal); Sona, P. [Dipartimento di Fisica, Universita di Firenze and INFN Sez. Florence (Italy)

    2007-09-21

    The original Lindhard-Scharff-Schiott (LSS) theory and the more recent Tilinin theory for calculating the nuclear and electronic stopping powers of slow heavy ions are compared with predictions from the SRIM code by Ziegler. While little discrepancies are present for the nuclear contribution to the energy loss, large differences are found in the electronic one. When full ion recoil cascade simulations are tested against the elastic neutron scattering data available in the literature, it can be concluded that the LSS theory is the more accurate.

  8. Study of Energy Losses in High-Voltage Induction Motor Electric Drive

    Directory of Open Access Journals (Sweden)

    Svilen Rachev

    2016-10-01

    Full Text Available The dynamic behavior during operation of the high-voltage induction motor electric drive has been studied by means of mathematical model developed. The purpose is to draw out more clearly picture of operation of high-voltage induction motor drives. The system of differential equations has been transformed and solved using suitable software. As a result the values of the energy losses components in the induction motor have been obtained according to different values of supply voltage and factor of inertia. Some of the study results have been presented graphically. An analysis has been made and conclusions from the results obtained have been done.

  9. Automatic generation of force fields and property surfaces for use in variational vibrational calculations of anharmonic vibrational energies and zero-point vibrational averaged properties.

    Science.gov (United States)

    Kongsted, Jacob; Christiansen, Ove

    2006-09-28

    An automatic and general procedure for the calculation of geometrical derivatives of the energy and general property surfaces for molecular systems is developed and implemented. General expressions for an n-mode representation are derived, where the n-mode representation includes only the couplings between n or less degrees of freedom. The general expressions are specialized to derivative force fields and property surfaces, and a scheme for calculation of the numerical derivatives is implemented. The implementation is interfaced to electronic structure programs and may be used for both ground and excited electronic states. The implementation is done in the context of a vibrational structure program and can be used in combination with vibrational self-consistent field (VSCF), vibrational configuration interaction (VCI), vibrational Moller-Plesset, and vibrational coupled cluster calculations of anharmonic wave functions and calculation of vibrational averaged properties at the VSCF and VCI levels. Sample calculations are presented for fundamental vibrational energies and vibrationally averaged dipole moments and frequency dependent polarizabilities and hyperpolarizabilities of water and formaldehyde.

  10. Effects of grapefruit, grapefruit juice and water preloads on energy balance, weight loss, body composition, and cardiometabolic risk in free-living obese adults

    Directory of Open Access Journals (Sweden)

    Niswender Kevin D

    2011-02-01

    Full Text Available Abstract Background Reducing dietary energy density has proven to be an effective strategy to reduce energy intakes and promote weight control. This effect appears most robust when a low energy dense preload is consumed before meals. Yet, much discussion continues regarding the optimal form of a preload. The purpose of the present study was to compare effects of a solid (grapefruit, liquid (grapefruit juice and water preload consumed prior to breakfast, lunch and dinner in the context of caloric restriction. Methods Eighty-five obese adults (BMI 30-39.9 were randomly assigned to (127 g grapefruit (GF, grapefruit juice (GFJ or water preload for 12 weeks after completing a 2-week caloric restriction phase. Preloads were matched for weight, calories, water content, and energy density. Weekly measures included blood pressure, weight, anthropometry and 24-hour dietary intakes. Resting energy expenditure, body composition, physical performance and cardiometabolic risk biomarkers were assessed. Results The total amount (grams of food consumed did not change over time. Yet, after preloads were combined with caloric restriction, average dietary energy density and total energy intakes decreased by 20-29% from baseline values. Subjects experienced 7.1% weight loss overall, with significant decreases in percentage body, trunk, android and gynoid fat, as well as waist circumferences (-4.5 cm. However, differences were not statistically significant among groups. Nevertheless, the amount and direction of change in serum HDL-cholesterol levels in GF (+6.2% and GFJ (+8.2% preload groups was significantly greater than water preload group (-3.7%. Conclusions These data indicate that incorporating consumption of a low energy dense dietary preload in a caloric restricted diet is a highly effective weight loss strategy. But, the form of the preload did not have differential effects on energy balance, weight loss or body composition. It is notable that subjects in GF

  11. Electron energy loss spectroscopy of excitons in two-dimensional-semiconductors as a function of temperature

    KAUST Repository

    Tizei, Luiz H. G.

    2016-04-21

    We have explored the benefits of performing monochromated Electron Energy Loss Spectroscopy(EELS) in samples at cryogenic temperatures. As an example, we have observed the excitonic absorption peaks in single layer Transition Metal Dichalcogenides. These peaks appear separated by small energies due to spin orbit coupling. We have been able to distinguish the split for MoS2 below 300 K and for MoSe2 below 220 K. However, the distinction between peaks is only clear at 150 K. We have measured the change in absorption threshold between 150 K and 770 K for MoS2 and MoSe2. We discuss the effect of carbon and ice contamination in EELSspectra. The increased spectral resolution available made possible with modern monochromators in electron microscopes will require the development of stable sample holders which reaches temperatures far below that of liquid nitrogen.

  12. Charge-state-dependent energy loss of slow ions. II. Statistical atom model

    Science.gov (United States)

    Wilhelm, Richard A.; Möller, Wolfhard

    2016-05-01

    A model for charge-dependent energy loss of slow ions is developed based on the Thomas-Fermi statistical model of atoms. Using a modified electrostatic potential which takes the ionic charge into account, nuclear and electronic energy transfers are calculated, the latter by an extension of the Firsov model. To evaluate the importance of multiple collisions even in nanometer-thick target materials we use the charge-state-dependent potentials in a Monte Carlo simulation in the binary collision approximation and compare the results to experiment. The Monte Carlo results reproduce the incident charge-state dependence of measured data well [see R. A. Wilhelm et al., Phys. Rev. A 93, 052708 (2016), 10.1103/PhysRevA.93.052708], even though the experimentally observed charge exchange dependence is not included in the model.

  13. Prediction of sound transmission loss through multilayered panels by using Gaussian distribution of directional incident energy

    Science.gov (United States)

    Kang; Ih; Kim; Kim

    2000-03-01

    In this study, a new prediction method is suggested for sound transmission loss (STL) of multilayered panels of infinite extent. Conventional methods such as random or field incidence approach often given significant discrepancies in predicting STL of multilayered panels when compared with the experiments. In this paper, appropriate directional distributions of incident energy to predict the STL of multilayered panels are proposed. In order to find a weighting function to represent the directional distribution of incident energy on the wall in a reverberation chamber, numerical simulations by using a ray-tracing technique are carried out. Simulation results reveal that the directional distribution can be approximately expressed by the Gaussian distribution function in terms of the angle of incidence. The Gaussian function is applied to predict the STL of various multilayered panel configurations as well as single panels. The compared results between the measurement and the prediction show good agreements, which validate the proposed Gaussian function approach.

  14. Communication: Investigation of the electron momentum density distribution of nanodiamonds by electron energy-loss spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Zhenbao; Yang, Bing; Lin, Yangming; Su, Dangsheng, E-mail: dssu@imr.ac.cn [Shenyang National Laboratory of Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Wenhua Road 72, Shenyang 110016 (China)

    2015-12-07

    The electron momentum distribution of detonation nanodiamonds (DND) was investigated by recording electron energy-loss spectra at large momentum transfer in the transmission electron microscope (TEM), which is known as electron Compton scattering from solid (ECOSS). Compton profile of diamond film obtained by ECOSS was found in good agreement with prior photon experimental measurement and theoretical calculation that for bulk diamond. Compared to the diamond film, the valence Compton profile of DND was found to be narrower, which indicates a more delocalization of the ground-state charge density for the latter. Combining with other TEM characterizations such as high-resolution transmission electron spectroscopy, diffraction, and energy dispersive X-ray spectroscopy measurements, ECOSS was shown to be a great potential technique to study ground-state electronic properties of nanomaterials.

  15. Photovoltaic array loss mechanisms

    Science.gov (United States)

    Gonzalez, Charles

    1986-10-01

    Loss mechanisms which come into play when solar cell modules are mounted in arrays are identified. Losses can occur either from a reduction in the array electrical performance or with nonoptimal extraction of power from the array. Electrical performance degradation is caused by electrical mismatch, transmission losses from cell surface soiling and steep angle of reflectance, and electrical losses from field wiring resistance and the voltage drop across blocking diodes. The second type of loss, concerned with the operating points of the array, can involve nonoptimal load impedance and limiting the operating envelope of the array to specific ranges of voltage and current. Each of the loss mechanisms are discussed and average energy losses expected from soiling, steep reflectance angles and circuit losses are calculated.

  16. The energy loss effect of incoming gluon from $J/\\psi$ production in p-A collisions

    CERN Document Server

    Song, Li-Hua; Duan, Chun-Gui

    2016-01-01

    The energy loss effect of incoming gluon from $J/\\psi$ production in p-A (or d-A) collisions is investigated by means of the E866, RHIC and LHC experimental data. The gluon mean energy loss per unit path length $dE/dL = 2.18\\pm0.14$ GeV/fm is extracted by fitting the E866 experimental data for $J/\\psi$ production cross section ratios $R_{W(Fe)/Be}(x_{F})$. The obtained result indicates that the incoming gluons lose more energy than the incident quarks. By comparing the theoretical results with E866, RHIC, and LHC experimental data, it is found that the nuclear suppression due to the incident gluon (quark) energy loss reduces (increases) with the increase of the kinematic variable $x_{F}$ (or $y$). The energy loss effect of incoming gluon plays an important role on the suppression of $J/\\psi$ production in a wide energy range from $\\sqrt{s}=38.7$ GeV to $\\sqrt{s}=5.0$ TeV, and the influence of incident quark energy loss can be ignored for high energy(such as at RHIC and LHC energy).

  17. Evaluation of Beam Losses and Energy Depositions for a Possible Phase II Design for LHC Collimation

    CERN Document Server

    Lari, L; Bracco, C; Brugger, M; Cerutti, F; Doyle, E; Ferrari, A; Keller, L; Lundgren, S; Keller, L; Mauri, M; Redaelli, S; Sarchiapone, L; Smith, J; Vlachoudis, V; Weiler, T

    2008-01-01

    The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam intensity lifetime is expected to be of the order of 20h. The Phase II collimation system has to be able to handle particle losses in stable physics conditions at 7 TeV in order to avoid beam aborts and to allow correction of parameters and restoration to nominal conditions. Monte Carlo simulations are needed in order to evaluate the behavior of metallic high-Z collimators during operation scenarios using a realistic distribution of losses, which is a mix of the three limiting halo cases. Moreover, the consequences in the IR7 insertion of the worst (case) abnormal beam loss are evaluated. The case refers to a spontaneous trigger of the horizontal extraction kicker at top energy, when Phase II collimators are used. These studies are an important input for engineering design of the collimation Phase II system and for the evaluation of their effect on adjacent components. The goal is to build collimators that can ...

  18. Implications of Postharvest Food Loss/Waste Prevention to Energy and Resources Conservation

    Science.gov (United States)

    Cai, X.; Shafiee-Jood, M.

    2015-12-01

    World's growing demand for food is driven by population and income growth, dietary changes, and the ever-increasing competition between food, feed and bioenergy challenges food security; meanwhile agricultural expansion and intensification threats the environment by the various detrimental impacts. Researchers have attempted to explore strategies to overcome this grand challenge. One of the promising solutions that have attracted considerable attention recently is to increase the efficiency of food supply chain by reducing food loss and waste (FLW). According to recent studies conducted by Food and Agriculture Organization (FAO), United Nation, almost one third of the food produced for human consumption globally is lost or wasted along the food supply chain. This amount of food discarded manifests a missing, yet potential, opportunity to sustainably enhance both food security and environmental sustainability. However, implementing the strategies and technologies for tackling FLW does not come up as an easy solution since it requires economic incentives, benefit and cost analysis, infrastructure development, and appropriate market mechanism. In this presentation I will provide a synthesis of knowledge on the implications of postharvest food loss/waste prevention to energy and resource conservation, environmental protection, as well as food security. I will also discuss how traditional civil and environmental engineering can contribute to the reduction of postharvest food loss, an important issue of sustainable agriculture.

  19. TIGER2 with solvent energy averaging (TIGER2A): An accelerated sampling method for large molecular systems with explicit representation of solvent.

    Science.gov (United States)

    Li, Xianfeng; Snyder, James A; Stuart, Steven J; Latour, Robert A

    2015-10-14

    The recently developed "temperature intervals with global exchange of replicas" (TIGER2) accelerated sampling method is found to have inaccuracies when applied to systems with explicit solvation. This inaccuracy is due to the energy fluctuations of the solvent, which cause the sampling method to be less sensitive to the energy fluctuations of the solute. In the present work, the problem of the TIGER2 method is addressed in detail and a modification to the sampling method is introduced to correct this problem. The modified method is called "TIGER2 with solvent energy averaging," or TIGER2A. This new method overcomes the sampling problem with the TIGER2 algorithm and is able to closely approximate Boltzmann-weighted sampling of molecular systems with explicit solvation. The difference in performance between the TIGER2 and TIGER2A methods is demonstrated by comparing them against analytical results for simple one-dimensional models, against replica exchange molecular dynamics (REMD) simulations for sampling the conformation of alanine dipeptide and the folding behavior of (AAQAA)3 peptide in aqueous solution, and by comparing their performance in sampling the behavior of hen egg-white lysozyme in aqueous solution. The new TIGER2A method solves the problem caused by solvent energy fluctuations in TIGER2 while maintaining the two important characteristics of TIGER2, i.e., (1) using multiple replicas sampled at different temperature levels to help systems efficiently escape from local potential energy minima and (2) enabling the number of replicas used for a simulation to be independent of the size of the molecular system, thus providing an accelerated sampling method that can be used to efficiently sample systems considered too large for the application of conventional temperature REMD.

  20. Energy losses in thermally cycled optical fibers constrained in small bend radii

    Energy Technology Data Exchange (ETDEWEB)

    Guild, Eric; Morelli, Gregg

    2012-09-23

    High energy laser pulses were fired into a 365μm diameter fiber optic cable constrained in small radii of curvature bends, resulting in a catastrophic failure. Q-switched laser pulses from a flashlamp pumped, Nd:YAG laser were injected into the cables, and the spatial intensity profile at the exit face of the fiber was observed using an infrared camera. The transmission of the radiation through the tight radii resulted in an asymmetric intensity profile with one half of the fiber core having a higher peak-to-average energy distribution. Prior to testing, the cables were thermally conditioned while constrained in the small radii of curvature bends. Single-bend, double-bend, and U-shaped eometries were tested to characterize various cable routing scenarios.

  1. Oswald-Kasper-Gaukler model for reflection electron energy loss spectroscopy

    Science.gov (United States)

    Salvat-Pujol, F.; Werner, W. S. M.

    2011-05-01

    The Oswald-Kasper-Gaukler (OKG) model for elastic electron backscattering [J. Electr. Spectrosc. Rel. Phen.JESRAW0368-204810.1016/0368-2048(93)80019-I 61(1993)251] has been extended within the partial-intensity approach to take inelastic collisions into account. Analytical expressions have been derived for the path-length distribution and the partial intensities, achieving good agreement with results of Monte Carlo (MC) calculations of these quantities. A criterion is given to predict the validity of the model for a given material, geometry, and kinetic energy. Experimental reflection electron energy loss spectroscopy (REELS) spectra have been compared with REELS spectra calculated using the modified OKG model, obtaining good agreement between them. The proposed model is also applied in a quantitative analysis of experimental REELS. In all investigated cases, the single-scattering loss distributions retrieved from this analysis agree with results from previous analyses—based on MC calculations—within 5%. The presented model can therefore be employed in quantitative analyses of REELS of semi-infinite solids, while it is both numerically simpler and conceptually clearer than related approaches.

  2. The effects of high electronic energy loss on the chemical modification of polyimide

    CERN Document Server

    SunYouMei; Jin Yun Fan; Liu Chang Long; LiuJie; Wang Zhi Guang; Zhang Qi; Zhu Zhi Yong

    2002-01-01

    In order to observe the role of electronic energy loss (dE/dX) sub e on chemical modification of polyimide (PI), the multi-layer stacks (corresponding to different dE/dX) were irradiated by different swift heavy ions (1.37 GeV Ar sup 4 sup 0 , 1.98 GeV Kr sup 8 sup 4 , 1.755 GeV Xe sup 1 sup 3 sup 6 and 2.636 GeV U sup 2 sup 3 sup 8) under vacuum and room temperature. The chemical changes of modified PI films were studied by Fourier transform infrared (FTIR) and ultraviolet/visible (UV/Vis) absorption spectroscopy. The degradation of PI was investigated in the fluence range from 1x10 sup 1 sup 0 to 5.5x10 sup 1 sup 2 ions/cm sup 2 and different electronic energy loss from 0.77 to 11.5 keV/nm. The FTIR results show the absorbance of the typical function group decrease exponentially as a function of fluence. The alkyne end group was found after irradiation and its formation radii were 5.6 and 5.9 nm corresponding to 8.8 and 11.5 keV/nm Xe irradiation respectively. UV/Vis analysis indicates the radiation induced...

  3. On the diversity of compact objects within supernova remnants - II. Energy-loss mechanisms

    Science.gov (United States)

    Rogers, Adam; Safi-Harb, Samar

    2017-02-01

    Energy losses from isolated neutron stars are commonly attributed to the emission of electromagnetic radiation from a rotating point-like magnetic dipole in vacuum. This emission mechanism predicts a braking index n = 3, which is not observed in highly magnetized neutron stars. Despite this fact, the assumptions of a dipole field and rapid early rotation are often assumed a priori, typically causing a discrepancy between the characteristic age and the associated supernova remnant (SNR) age. We focus on neutron stars with `anomalous' magnetic fields that have established SNR associations and known ages. Anomalous X-ray pulsars (AXPs) and soft gamma repeaters (SGRs) are usually described in terms of the magnetar model that posits a large magnetic field established by dynamo action. The high magnetic field pulsars (HBPs) have extremely large magnetic fields just above quantum electrodynamics scale (but below that of the AXPs and SGRs), and central compact objects (CCOs) may have buried fields that will emerge in the future as nascent magnetars. In the first part of this series, we examined magnetic field growth as a method of uniting the CCOs with HBPs and X-ray dim isolated neutron stars (XDINSs) through evolution. In this work, we constrain the characteristic age of these neutron stars using the related SNR age for a variety of energy-loss mechanisms and allowing for arbitrary initial spin periods. In addition to the SNR age, we also use the observed braking indices and X-ray luminosities to constrain the models.

  4. Energy loss, equilibration, and thermodynamics of a baryon rich strongly coupled quark-gluon plasma

    CERN Document Server

    Rougemont, Romulo; Finazzo, Stefano; Noronha, Jorge

    2015-01-01

    Lattice data for the QCD equation of state and the baryon susceptibility near the crossover phase transition (at zero baryon density) are used to determine the input parameters of a 5-dimensional Einstein-Maxwell-Dilaton holographic model that provides a consistent holographic framework to study both equilibrium and out-of-equilibrium properties of a hot and {\\it baryon rich} strongly coupled quark-gluon plasma (QGP). We compare our holographic equation of state computed at nonzero baryon chemical potential, $\\mu_B$, with recent lattice calculations and find quantitative agreement for the pressure and the speed of sound for $\\mu_B \\leq 400$ MeV. This holographic model is used to obtain holographic predictions for the temperature and $\\mu_B$ dependence of the drag force and the Langevin diffusion coefficients associated with heavy quark jet propagation as well as the jet quenching parameter $\\hat{q}$ and the shooting string energy loss of light quarks in the dense plasma. We find that the energy loss of heavy ...

  5. Impact of temperature dependence of the energy loss on jet quenching observables

    CERN Document Server

    Scardina, F; Greco, V

    2011-01-01

    The quenching of jets (particles with $p_T>>T, \\Lambda_{QCD}$) in ultra-relativistic heavy-ion collisions has been one of the main prediction and discovery at RHIC. We have studied, by a simple jet quenching modeling, the correlation between different observables like the nuclear modification factor $\\Rapt$, the elliptic flow $v_2$ and the ratio of quark to gluon suppression $R_{AA}(quark)/R_{AA}(gluon)$. We show that the relation among these observables is strongly affected by the temperature dependence of the energy loss. In particular the large $v_2$ and and the nearly equal $\\Rapt$ of quarks and gluons can be accounted for only if the energy loss occurs mainly around the temperature $T_c$ and the flavour conversion is significant.Finally we point out that the efficency in the conversion of the space eccentricity into the momentum one ($v_2$) results to be quite smaller respect to the one coming from elastic scatterings in a fluid with a viscosity to entropy density ratio $4\\pi\\eta/s=1$.

  6. Practical spatial resolution of electron energy loss spectroscopy in aberration corrected scanning transmission electron microscopy.

    Science.gov (United States)

    Shah, A B; Ramasse, Q M; Wen, J G; Bhattacharya, A; Zuo, J M

    2011-08-01

    The resolution of electron energy loss spectroscopy (EELS) is limited by delocalization of inelastic electron scattering rather than probe size in an aberration corrected scanning transmission electron microscope (STEM). In this study, we present an experimental quantification of EELS spatial resolution using chemically modulated 2×(LaMnO(3))/2×(SrTiO(3)) and 2×(SrVO(3))/2×(SrTiO(3)) superlattices by measuring the full width at half maxima (FWHM) of integrated Ti M(2,3), Ti L(2,3), V L(2,3), Mn L(2,3), La N(4,5), La N(2,3) La M(4,5) and Sr L(3) edges over the superlattices. The EELS signals recorded using large collection angles are peaked at atomic columns. The FWHM of the EELS profile, obtained by curve-fitting, reveals a systematic trend with the energy loss for the Ti, V, and Mn edges. However, the experimental FWHM of the Sr and La edges deviates significantly from the observed experimental tendency.

  7. Complex suppression patterns distinguish between major energy loss effects in Quark–Gluon Plasma

    Directory of Open Access Journals (Sweden)

    Magdalena Djordjevic

    2016-12-01

    Full Text Available Interactions of high momentum partons with Quark–Gluon Plasma created in relativistic heavy-ion collisions provide an excellent tomography tool for this new form of matter. Recent measurements for charged hadrons and unidentified jets at the LHC show an unexpected flattening of the suppression curves at high momentum, exhibited when either momentum or the collision centrality is changed. Furthermore, a limited data available for B probes indicate a qualitatively different pattern, as nearly the same flattening is exhibited for the curves corresponding to two opposite momentum ranges. We here show that the experimentally measured suppression curves are well reproduced by our theoretical predictions, and that the complex suppression patterns are due to an interplay of collisional, radiative energy loss and the dead-cone effect. Furthermore, for B mesons, we predict that the uniform flattening of the suppression indicated by the limited dataset is in fact valid across the entire span of the momentum ranges, which will be tested by the upcoming experiments. Overall, the study presented here, provides a rare opportunity for pQCD theory to qualitatively distinguish between the major energy loss mechanisms at the same (nonintuitive dataset.

  8. Energy loss optimization of run-off-road wheels applying imperialist competitive algorithm

    Directory of Open Access Journals (Sweden)

    Hamid Taghavifar

    2014-08-01

    Full Text Available The novel imperialist competitive algorithm (ICA has presented outstanding fitness on various optimization problems. Application of meta-heuristics has been a dynamic studying interest of the reliability optimization to determine idleness and reliability constituents. The application of a meta-heuristic evolutionary optimization method, imperialist competitive algorithm (ICA, for minimization of energy loss due to wheel rolling resistance in a soil bin facility equipped with single-wheel tester is discussed. The required data were collected thorough various designed experiments in the controlled soil bin environment. Local and global searching of the search space proposed that the energy loss could be reduced to the minimum amount of 15.46 J at the optimized input variable configuration of wheel load at 1.2 kN, tire inflation pressure of 296 kPa and velocity of 2 m/s. Meanwhile, genetic algorithm (GA, particle swarm optimization (PSO and hybridized GA–PSO approaches were benchmarked among the broad spectrum of meta-heuristics to find the outperforming approach. It was deduced that, on account of the obtained results, ICA can achieve optimum configuration with superior accuracy in less required computational time.

  9. Energy loss, hadronization and hadronic interactions of heavy flavors in relativistic heavy-ion collisions

    CERN Document Server

    Cao, Shanshan; Bass, Steffen A

    2015-01-01

    We construct a theoretical framework to describe the evolution of heavy flavors produced in relativistic heavy-ion collisions. The in-medium energy loss of heavy quarks is described using our modified Langevin equation that incorporates both quasi-elastic scatterings and the medium-induced gluon radiation. The space-time profiles of the fireball is described by a (2+1)-dimensional hydrodynamics simulation. A hybrid model of fragmentation and coalescence is utilized for heavy quark hadronization, after which the produced heavy mesons together with the soft hadrons produced from the bulk QGP are fed into the hadron cascade UrQMD model to simulate the subsequent hadronic interactions. We find that the medium-induced gluon radiation contributes significantly to heavy quark energy loss at high $p_\\mathrm{T}$; heavy-light quark coalescence enhances heavy meson production at intermediate $p_\\mathrm{T}$; and scatterings inside the hadron gas further suppress the $D$ meson $R_\\mathrm{AA}$ at large $p_\\mathrm{T}$ and e...

  10. Complex suppression patterns distinguish between major energy loss effects in Quark-Gluon Plasma

    Science.gov (United States)

    Djordjevic, Magdalena

    2016-12-01

    Interactions of high momentum partons with Quark-Gluon Plasma created in relativistic heavy-ion collisions provide an excellent tomography tool for this new form of matter. Recent measurements for charged hadrons and unidentified jets at the LHC show an unexpected flattening of the suppression curves at high momentum, exhibited when either momentum or the collision centrality is changed. Furthermore, a limited data available for B probes indicate a qualitatively different pattern, as nearly the same flattening is exhibited for the curves corresponding to two opposite momentum ranges. We here show that the experimentally measured suppression curves are well reproduced by our theoretical predictions, and that the complex suppression patterns are due to an interplay of collisional, radiative energy loss and the dead-cone effect. Furthermore, for B mesons, we predict that the uniform flattening of the suppression indicated by the limited dataset is in fact valid across the entire span of the momentum ranges, which will be tested by the upcoming experiments. Overall, the study presented here, provides a rare opportunity for pQCD theory to qualitatively distinguish between the major energy loss mechanisms at the same (nonintuitive) dataset.

  11. Time-of-flight electron energy loss spectroscopy using TM110 deflection cavities

    Directory of Open Access Journals (Sweden)

    W. Verhoeven

    2016-09-01

    Full Text Available We demonstrate the use of two TM110 resonant cavities to generate ultrashort electron pulses and subsequently measure electron energy losses in a time-of-flight type of setup. The method utilizes two synchronized microwave cavities separated by a drift space of 1.45 m. The setup has an energy resolution of 12 ± 2 eV FWHM at 30 keV, with an upper limit for the temporal resolution of 2.7 ± 0.4 ps. Both the time and energy resolution are currently limited by the brightness of the tungsten filament electron gun used. Through simulations, it is shown that an energy resolution of 0.95 eV and a temporal resolution of 110 fs can be achieved using an electron gun with a higher brightness. With this, a new method is provided for time-resolved electron spectroscopy without the need for elaborate laser setups or expensive magnetic spectrometers.

  12. Time-of-flight electron energy loss spectroscopy using TM110 deflection cavities.

    Science.gov (United States)

    Verhoeven, W; van Rens, J F M; van Ninhuijs, M A W; Toonen, W F; Kieft, E R; Mutsaers, P H A; Luiten, O J

    2016-09-01

    We demonstrate the use of two TM110 resonant cavities to generate ultrashort electron pulses and subsequently measure electron energy losses in a time-of-flight type of setup. The method utilizes two synchronized microwave cavities separated by a drift space of 1.45 m. The setup has an energy resolution of 12 ± 2 eV FWHM at 30 keV, with an upper limit for the temporal resolution of 2.7 ± 0.4 ps. Both the time and energy resolution are currently limited by the brightness of the tungsten filament electron gun used. Through simulations, it is shown that an energy resolution of 0.95 eV and a temporal resolution of 110 fs can be achieved using an electron gun with a higher brightness. With this, a new method is provided for time-resolved electron spectroscopy without the need for elaborate laser setups or expensive magnetic spectrometers.

  13. Detailed Monte Carlo Simulation of electron transport and electron energy loss spectra.

    Science.gov (United States)

    Attarian Shandiz, M; Salvat, F; Gauvin, R

    2016-11-01

    A computer program for detailed Monte Carlo simulation of the transport of electrons with kinetic energies in the range between about 0.1 and about 500 keV in bulk materials and in thin solid films is presented. Elastic scattering is described from differential cross sections calculated by the relativistic (Dirac) partial-wave expansion method with different models of the scattering potential. Inelastic interactions are simulated from an optical-data model based on an empirical optical oscillator strength that combines optical functions of the solid with atomic photoelectric data. The generalized oscillator strength is built from the adopted optical oscillator strength by using an extension algorithm derived from Lindhard's dielectric function for a free-electron gas. It is shown that simulated backscattering fractions of electron beams from bulk (semi-infinite) specimens are in good agreement with experimental data for beam energies from 0.1 keV up to about 100 keV. Simulations also yield transmitted and backscattered fractions of electron beams on thin solid films that agree closely with measurements for different film thicknesses and incidence angles. Simulated most probable deflection angles and depth-dose distributions also agree satisfactorily with measurements. Finally, electron energy loss spectra of several elemental solids are simulated and the effects of the beam energy and the foil thickness on the signal to background and signal to noise ratios are investigated. SCANNING 38:475-491, 2016. © 2015 Wiley Periodicals, Inc.

  14. Time-of-flight electron energy loss spectroscopy using TM110 deflection cavities

    Science.gov (United States)

    Verhoeven, W.; van Rens, J. F. M.; van Ninhuijs, M. A. W.; Toonen, W. F.; Kieft, E. R.; Mutsaers, P. H. A.; Luiten, O. J.

    2016-01-01

    We demonstrate the use of two TM110 resonant cavities to generate ultrashort electron pulses and subsequently measure electron energy losses in a time-of-flight type of setup. The method utilizes two synchronized microwave cavities separated by a drift space of 1.45 m. The setup has an energy resolution of 12 ± 2 eV FWHM at 30 keV, with an upper limit for the temporal resolution of 2.7 ± 0.4 ps. Both the time and energy resolution are currently limited by the brightness of the tungsten filament electron gun used. Through simulations, it is shown that an energy resolution of 0.95 eV and a temporal resolution of 110 fs can be achieved using an electron gun with a higher brightness. With this, a new method is provided for time-resolved electron spectroscopy without the need for elaborate laser setups or expensive magnetic spectrometers. PMID:27704035

  15. Method for optimal design of pipes for low-energy district heating, with focus on heat losses

    DEFF Research Database (Denmark)

    Dalla Rosa, Alessandro; Li, Hongwei; Svendsen, Svend

    2011-01-01

    The synergy between highly energy-efficient buildings and low-energy district heating (DH) systems is a promising concept for the optimal integration of energy-saving policies and energy supply systems based on renewable energy (RE). Network transmission and distribution heat loss is one of the key...... factors in the optimal design of low-energy DH systems. Various pipe configurations are considered in this paper: flexible pre-insulated twin pipes with symmetrical or asymmetrical insulation, double pipes, and triple pipes. These technologies represent potential energy-efficient and cost...... showed the influence of the soil temperature throughout the year. Finally, the article describes proposals for the optimal design of pipes for low-energy applications and presents methods for decreasing heat losses....

  16. Sleep stage classification based on average energy dissipation%基于平均能量耗散的睡眠分期研究

    Institute of Scientific and Technical Information of China (English)

    焦东来; 冯昊; 姚凤华; 孟浩; 井晓茹; 王俊

    2013-01-01

    Objective The quality of sleep has a great relationship with health. The result of sleep stage classification is an important indicator to measure the quality of sleep and treat sleep disorders. Methods The EEG signals about wake and the first stage of non-rapid eye movement sleep we used in this paper are extracted from the same person at the same time. After the symbolization, we compute the average energy dissipations and make the statistical analysis and multi-sample analysis. Results The average energy dissipation reflects the changes of sleep stages, which is higher in wake stage than in the first stage of non-rapid eye movement sleep, and is confirmed by statistical analysis and multi-sample experiments. Conclusions The average energy dissipation can be applied into automatic sleep stage classification. Multi-parameter analysis could achieve a higher accuracy of sleep stage classification.%目的 睡眠质量影响身体健康与工作效率,睡眠分期结果是衡量睡眠质量的重要指标和诊治睡眠障碍性疾病的重要途径.方法 通过提取相同个体相同时刻的清醒期和非快速眼动睡眠Ⅰ期的EEG信号,分别符号化后计算平均能量耗散,对两个睡眠阶段的相对熵进行统计分析及多样本验证.结果 研究结果表明,平均能量耗散很好地反映了睡眠状态的变化,在清醒期较大,在非快速眼动睡眠Ⅰ期较小,并通过差异显著性检验和多样本验证.结论 平均能量耗散可以作为睡眠自动化分期参数补充到睡眠分期研究中来,在临床上可通过多参数分析,提高睡眠分期的准确性.

  17. A Monte Carlo study for the calculation of the average linear energy transfer (LET) distributions for a clinical proton beam line and a radiobiological carbon ion beam line.

    Science.gov (United States)

    Romano, F; Cirrone, G A P; Cuttone, G; Rosa, F Di; Mazzaglia, S E; Petrovic, I; Fira, A Ristic; Varisano, A

    2014-06-21

    Fluence, depth absorbed dose and linear energy transfer (LET) distributions of proton and carbon ion beams have been investigated using the Monte Carlo code Geant4 (GEometry ANd Tracking). An open source application was developed with the aim to simulate two typical transport beam lines, one used for ocular therapy and cell irradiations with protons and the other for cell irradiations with carbon ions. This tool allows evaluation of the primary and total dose averaged LET and predict their spatial distribution in voxelized or sliced geometries. In order to reproduce the LET distributions in a realistic way, and also the secondary particles' contributions due to nuclear interactions were considered in the computations. Pristine and spread-out Bragg peaks were taken into account both for proton and carbon ion beams, with the maximum energy of 62 MeV/n. Depth dose distributions were compared with experimental data, showing good agreement. Primary and total LET distributions were analysed in order to study the influence of contributions of secondary particles in regions at different depths. A non-negligible influence of high-LET components was found in the entrance channel for proton beams, determining the total dose averaged LET by the factor 3 higher than the primary one. A completely different situation was obtained for carbon ions. In this case, secondary particles mainly contributed in the tail that is after the peak. The results showed how the weight of light and heavy secondary ions can considerably influence the computation of LET depth distributions. This has an important role in the interpretation of results coming from radiobiological experiments and, therefore, in hadron treatment planning procedures.

  18. A Monte Carlo study for the calculation of the average linear energy transfer (LET) distributions for a clinical proton beam line and a radiobiological carbon ion beam line

    Science.gov (United States)

    Romano, F.; Cirrone, G. A. P.; Cuttone, G.; Di Rosa, F.; Mazzaglia, S. E.; Petrovic, I.; Ristic Fira, A.; Varisano, A.

    2014-06-01

    Fluence, depth absorbed dose and linear energy transfer (LET) distributions of proton and carbon ion beams have been investigated using the Monte Carlo code Geant4 (GEometry ANd Tracking). An open source application was developed with the aim to simulate two typical transport beam lines, one used for ocular therapy and cell irradiations with protons and the other for cell irradiations with carbon ions. This tool allows evaluation of the primary and total dose averaged LET and predict their spatial distribution in voxelized or sliced geometries. In order to reproduce the LET distributions in a realistic way, and also the secondary particles’ contributions due to nuclear interactions were considered in the computations. Pristine and spread-out Bragg peaks were taken into account both for proton and carbon ion beams, with the maximum energy of 62 MeV/n. Depth dose distributions were compared with experimental data, showing good agreement. Primary and total LET distributions were analysed in order to study the influence of contributions of secondary particles in regions at different depths. A non-negligible influence of high-LET components was found in the entrance channel for proton beams, determining the total dose averaged LET by the factor 3 higher than the primary one. A completely different situation was obtained for carbon ions. In this case, secondary particles mainly contributed in the tail that is after the peak. The results showed how the weight of light and heavy secondary ions can considerably influence the computation of LET depth distributions. This has an important role in the interpretation of results coming from radiobiological experiments and, therefore, in hadron treatment planning procedures.

  19. Electronic and optical properties of Fe, Pd, and Ti studied by reflection electron energy loss spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tahir, Dahlang [Department of Physics, Hasanuddin University, Makassar 90245 (Indonesia); Kraaer, Jens; Tougaard, Sven [Department of Physics, Chemistry, and Pharmacy, University of Southern Denmark, DK-5230 Odense M (Denmark)

    2014-06-28

    We have studied the electronic and optical properties of Fe, Pd, and Ti by reflection electron energy-loss spectroscopy (REELS). REELS spectra recorded for primary energies in the range from 300 eV to 10 keV were corrected for multiple inelastically scattered electrons to determine the effective inelastic-scattering cross section. The dielectric functions and optical properties were determined by comparing the experimental inelastic-electron scattering cross section with a simulated cross section calculated within the semi-classical dielectric response model in which the only input is Im(−1/ε) by using the QUEELS-ε(k,ω)-REELS software package. The complex dielectric functions ε(k,ω), in the 0–100 eV energy range, for Fe, Pd, and Ti were determined from the derived Im(−1/ε) by Kramers-Kronig transformation and then the refractive index n and extinction coefficient k. The validity of the applied model was previously tested and found to give consistent results when applied to REELS spectra at energies between 300 and 1000 eV taken at widely different experimental geometries. In the present paper, we provide, for the first time, a further test on its validity and find that the model also gives consistent results when applied to REELS spectra in the full range of primary electron energies from 300 eV to 10000 eV. This gives confidence in the validity of the applied method.

  20. Energy loss in vehicle collisions from permanent deformation: an extension of the `Triangle Method'

    Science.gov (United States)

    Vangi, Dario; Begani, Filippo

    2013-06-01

    The paper presents an extension of the 'Triangle Method', to evaluate the energy loss in road accidents. The improvement of the method allows to evaluate the energy loss by both the colliding vehicles in car to car impacts, considering the main possible configurations of accident. The limits of applicability of the method are those of the Campbell's method [K.E. Campbell, Energy basis for collision severity, SAE paper 740565, Society of Automotive Engineers, Inc., Warrendale, Pennsylvania, 1974; A.G. Fonda, Principles of crush energy determination, SAE 1999-01-0106, Society of Automotive Engineers, Inc., Warrendale, Pennsylvania, 1999; N.S. Tumbas and R.A. Smith, Measurement protocol for quantifying vehicle damage from an energy basis point of view, SAE paper 880072, Society of Automotive Engineers, Inc., Warrendale, Pennsylvania, 1988; G.A. Nystrom, G. Kost, and S.M. Werner, Stiffness parameters for vehicle collision analysis, SAE paper 910119, Society of Automotive Engineers, Inc., Warrendale, Pennsylvania, 1991; J.A. Neptune, G.Y. Blair, and J.E. Flynn, A method for quantifying vehicle crush stiffness coefficients, SAE paper 920607, Society of Automotive Engineers, Inc., Warrendale, Pennsylvania, 1992]. The advantage over the usual methods are that the method does not require the knowledge of the stiffness of the vehicles and only two parameters are needed to define the damage geometry. The latter can be easily evaluated by visual inspection on a suitable photographical documentation of the damages, without the need to perform any direct measurement on the vehicles. Furthermore, the method can be used also in the very frequent cases in which some of the damage data about one of the vehicles are missing or in accidents involving lateral parts of the vehicle as zones near the wheels or the front, that have different behaviour from that tested in the classical crash tests. The error analysis developed shows that the errors due to the application of the extended

  1. A novel method for analyzing seismic energy loss associated with wave-induced fluid flow

    Science.gov (United States)

    Solazzi, Santiago G.; Germán Rubino, J.; Müller, Tobias M.; Milani, Marco; Guarracino, Luis; Holliger, Klaus

    2014-05-01

    Whenever a seismic wave propagates through a fluid saturated porous rock that contains heterogeneities in the mesoscopic scale, that is, heterogeneities larger than the typical pore size but smaller than the predominant wavelengths, local gradients in the pore-fluid pressure arise. These pressure gradients, which are due to the uneven response of the heterogeneities to the stress applied by the passing seismic wavefield, induce viscous fluid flow and energy dissipation. Consequently, seismic waves tend to be strongly attenuated and dispersed in this kind of media. This attenuation mechanism scales with the compressibility contrast between heterogeneities and the background. Correspondingly, environments characterized by patchy saturation as well as fractured media represent two prominent scenarios where seismic attenuation due to wave-induced fluid flow is expected to be the predominant energy dissipation mechanism. Numerical oscillatory compressibility and shear tests based on the quasistatic poroelasticity equations provide an effective means to compute equivalent viscoelastic moduli for representative rock samples of the heterogeneous media under study. Approaches of this type rely on the existence of a dynamic-equivalent medium, that is, the heterogeneous porous rock is represented by an equivalent homogeneous viscoelastic solid that exhibits an overall response similar to that of the original heterogeneous porous sample. This methodology allows for extracting the equivalent seismic attenuation and phase velocity of the sample, but fails to provide any information with regard to the underlying physical processes. In this work, we present a novel approach based on the quantification of the energy loss taking place in the interior of the considered heterogeneous rock sample. To this end, we first determine the spatial distribution of the energy dissipation in response to the applied oscillatory stresses. Next, we quantify the total dissipated energy as well as

  2. Spatially resolved electron energy loss spectroscopy of crescent-shaped plasmonic antennas.

    Science.gov (United States)

    Křápek, V; Koh, A L; Břínek, L; Hrtoň, M; Tomanec, O; Kalousek, R; Maier, S A; Šikola, T

    2015-05-01

    We present a study of the optical properties of gold crescent-shaped antennas by means of electron energy loss spectroscopy. These structures exhibit particularly large field enhancement near their sharp features, support two non-degenerate dipolar (i.e., optically active) localised surface plasmon resonances, and are widely tunable by a choice of their shape and dimensions. Depending on the volume and shape, we resolved up to four plasmon resonances in metallic structures under study in the energy range of 0.8 - 2.4 eV: two dipolar and quadrupolar mode and a multimodal assembly. The boundary-element-method calculations reproduced the observed spectra and helped to identify the character of the resonances. The two lowest modes are of particular importance owing to their dipolar nature. Remarkably, they are both concentrated near the tips of the crescent, spectrally well resolved and their energies can be tuned between 0.8 - 1.5 eV and 1.2 - 2.0 eV, respectively. As the lower spectral range covers the telecommunication wavelengths 1.30 and 1.55 μm, we envisage the possible use of such nanostructures in infrared communication technology.

  3. Physical activity and weight loss are independent predictors of improved insulin sensitivity following energy restriction.

    Science.gov (United States)

    Camps, Stefan G J A; Verhoef, Sanne P M; Westerterp, Klaas R

    2016-02-01

    The role of physical activity and the joint effect with sleep duration on insulin sensitivity (IS) during energy restriction followed by weight maintenance were determined. One hundred and two subjects (28 males) (mean ± SD age: 40 ± 9 years; BMI: 31.9 ± 3.0 kg/m(2) ) followed a very-low-energy diet for 8 weeks, followed by a 44-week period of weight maintenance. Body composition (three-compartment model based on body weight, total body water, and body volume), physical activity (accelerometry), sleep (questionnaire, Epworth Sleepiness Scale), and fasting plasma insulin and glucose concentrations were assessed before the diet and at 8, 20, and 52 weeks after the start. Compared to baseline, IS was improved significantly after 8 weeks (P physical activity counts. Maintaining daily physical activity during energy restriction is as important as weight loss itself in the improvement of IS; there was no additional effect of change in sleep duration. During weight maintenance, improved IS is maintained better if physical activity returns to baseline or higher. © 2016 The Obesity Society.

  4. Stopping powers and energy loss straggling for (0.9–3.4) MeV protons in a kapton polyimide thin film

    Energy Technology Data Exchange (ETDEWEB)

    Damache, S. [Division de Physique, CRNA, 02 Bd. Frantz Fanon, B.P. 399 Alger-gare, Algiers (Algeria); Djaroum, S. [Division de Technologie Nucléaire, CRNB, B.P. 180 Ain-Oussara, Djelfa (Algeria); Ouichaoui, S., E-mail: souichaoui@gmail.com [Université des Sciences et Technologie H. Boumediene (USTHB), Faculté de Physique, B.P. 32, 16111 Bab-Ezzouar, Algiers (Algeria); Amari, L.; Moussa, D. [Université des Sciences et Technologie H. Boumediene (USTHB), Faculté de Physique, B.P. 32, 16111 Bab-Ezzouar, Algiers (Algeria)

    2016-09-15

    The energy loss and energy loss straggling widths have been measured in transmission for E{sub p} ≈ (0.9–3.4) MeV protons traversing a thin kapton polyimide foil. In a prior step, the thickness and non-uniformity of the target foil were carefully investigated. The overall relative uncertainties in the stopping power and energy loss straggling variance data amount, respectively, to less than 2% and 8%. The S(E) experimental data show to be in excellent agreement with available previous ones and with those compiled in the ICRU-49 report. They are fully consistent with the predictions of Sigmund-Schinner’s binary collision theory of electronic stopping over the whole proton energy range explored. An average deviation of ∼2.5% relative to values calculated by the SRIM-2008 code, likely due to effects of valence electrons involving the C−H, C=C and C=O bonds, is however observed at low proton velocities. The measured energy loss straggling data, which are unique to our knowledge, are found to be in good agreement with values derived by the classical Bohr formula for E{sub p} ≳ 1300 keV but they significantly exceed Bohr’s collisional energy loss straggling at lower proton velocities where target electrons can no longer be considered as free. They also show to be consistent with the predictions of the Bethe-Livingston and Sigmund-Schinner theories over the low proton velocity region (E{sub p} < 1300 keV). However, they are significantly overestimated by these theories over the intermediate and high proton velocity regions, which may be due to bunching effect by inner shell electrons of the polymer target. Besides, our energy loss straggling data are in better overall consistency with the Yang, O’Connor and Wang empirical formula for E{sub p} > 1300 keV, while deviations above the latter amounting up to ∼18% are observed at lower proton velocities.

  5. A Study on Collaborative Operation Methods between New Energy Type Dispersed Power Supply System and SMES by Modified Euler Type Moving Average Prediction Model

    Science.gov (United States)

    Monai, Toshiharu; Takano, Ichiro; Nishikawa, Hisao; Sawada, Yoshio

    In this paper, the modified Euler type Moving Average Prediction (EMAP) model is proposed in order to operate a dispersed power supply system using new energy in autonomous mode. Furthermore, EMAP model is applied to operate a new type dispersed power supply system consisting of a large scale photovoltaic system (PV), a fuel cell (FC) as well as a small scale superconducting magnetic energy storage system (SMES). This distributed power supply system can meet the multi-quality electric power requirements of customers, and ensures voltage stability and UPS (Uninterruptible Power Supply) function as well. Each sub-system of this distributed power supply contributes to the above-mentioned system performance with its own excellent characteristics. Moreover, response characteristics of this system are confirmed with simulation by software PSIM, and, under collaborative operation methods by EMAP model, the required capacity of SMES to compensate the fluctuation of both PV output and load demand is examined by the simulation using software MATLAB/Simulink.

  6. Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach

    Directory of Open Access Journals (Sweden)

    Giovanni Meneghetti

    2017-07-01

    Full Text Available The fatigue behaviour of circumferentially notched specimens made of titanium alloy, Ti-6Al-4V, has been analysed. To investigate the notch effect on the fatigue strength, pure bending, pure torsion and multiaxial bending-torsion fatigue tests have been carried out on specimens characterized by two different root radii, namely 0.1 and 4 mm. Crack nucleation and subsequent propagation have been accurately monitored by using the direct current potential drop (DCPD technique. Based on the results obtained from the potential drop technique, the crack initiation life has been defined in correspondence of a relative potential drop increase V/V0 equal to 1%, and it has been used as failure criterion. Doing so, the effect of extrinsic mechanisms operating during crack propagation phase, such as sliding contact, friction and meshing between fracture surfaces, is expected to be reduced. The experimental fatigue test results have been re-analysed by using the local strain energy density (SED averaged over a structural volume having radius R0 and surrounding the notch tip. Finally, the use of the local strain energy density parameter allowed us to properly correlate the crack initiation life of Ti-6Al-4V notched specimens, despite the different notch geometries and loading conditions involved in the tests

  7. Greater than predicted decrease in energy expenditure during exercise after body weight loss in obese men.

    Science.gov (United States)

    Doucet, Eric; Imbeault, Pascal; St-Pierre, Sylvie; Alméras, Natalie; Mauriège, Pascale; Després, Jean-Pierre; Bouchard, Claude; Tremblay, Angelo

    2003-07-01

    This study was performed retrospectively to investigate whether exercise energy expenditure (EE) measured during a standardized treadmill protocol (4.5 km/h at 0% grade) falls below predicted values after body weight loss in obese men. A reference equation was established to predict net exercise EE in a control sample of 83 obese individuals (27 kg/m(2)hydrodensitometry. Net exercise EE, insulin, leptin, 3,3',5-tri-iodothyronine and free thyroxine were measured after an overnight fast at baseline and 2-4 weeks after the end of the programme, when subjects were weight stable. Body weight was significantly reduced (-11%; P <0.01) at the end of the weight loss programme. At baseline, measured net exercise EE was similar to that predicted from the regression equation [19.6 and 19.8 kJ/min (4.69 and 4.74 kcal/min) respectively; not significant]. However, after the end of the intervention, measured net exercise EE was significantly below the predicted value [15.5 and 17.3 kJ/min (3.71 and 4.14 kcal/min) respectively; P <0.01]. The difference between the predicted and the measured fall in net exercise EE was significantly associated with changes in leptin concentration ( r =0.79, P <0.01), even after correction for changes in fat mass and insulin. These observations suggest that net exercise EE falls below predicted values after body weight loss. In addition, this greater than predicted decrease in net exercise EE was associated with changes in leptin.

  8. Mapping boron in silicon solar cells using electron energy-loss spectroscopy

    DEFF Research Database (Denmark)

    Amorphous silicon solar cells typically consist of stacked layers deposited on plastic or metallic substrates making sample preparation for transmission electron microscopy (TEM) difficult. The amorphous silicon layer - the active part of the solar cell - is sandwiched between 10-nm-thick n- and p...... in the energies of plasmon peaks in the low loss region [5]. We use these approaches to characterize both a thick n-p junction and the 10-nm-thick p-doped layer of a working solar cell. [1] U. Kroll, C. Bucher, S. Benagli, I. Schönbächler, J. Meier, A. Shah, J. Ballutaud, A. Howling, Ch. Hollenstein, A. Büchel, M....... Hashikawa, K. Kajiwara, T. Yaguchi, M. Konno, H. Mori, Applied Physics Express 1 (2008) 074001 [5] V. Olevano, L. Reining, Physical Review Letters 86 (2001) 5962...

  9. Instantaneous charge state of Uranium projectiles in fully ionized plasmas from energy loss experiments

    CERN Document Server

    Morales, Roberto; Casas, David

    2016-01-01

    The instantaneous charge state of uranium ions traveling through a fully ionized hydrogen plasma has been theoretically studied and compared with one of the first energy loss experiments in plasmas, carried out at GSI-Darmstadt by Hoffmann \\textit{et al.} in the 90's. For this purpose, two different methods to estimate the instantaneous charge state of the projectile have been employed: (1) rate equations using ionization and recombination cross sections, and (2) equilibrium charge state formulas for plasmas. Also, the equilibrium charge state has been obtained using these ionization and recombination cross sections, and compared with the former equilibrium formulas. The equilibrium charge state of projectiles in plasmas is not always reached, it depends mainly on the projectile velocity and the plasma density. Therefore, a non-equilibrium or an instantaneous description of the projectile charge is necessary. The charge state of projectile ions cannot be measured, except after exiting the target, and experime...

  10. Electron energy loss spectroscopy techniques for the study of microbial chromium(VI) reduction

    Science.gov (United States)

    Daulton, Tyrone L.; Little, Brenda J.; Lowe, Kristine; Jones-Meehan, Joanne

    2002-01-01

    Electron energy loss spectroscopy (EELS) techniques were used to determine oxidation state, at high spatial resolution, of chromium associated with the metal-reducing bacteria, Shewanella oneidensis, in anaerobic cultures containing Cr(VI)O4(2-). These techniques were applied to fixed cells examined in thin section by conventional transmission electron microscopy (TEM) as well as unfixed, hydrated bacteria examined by environmental cell (EC)-TEM. Two distinct populations of bacteria were observed by TEM: bacteria exhibiting low image contrast and bacteria exhibiting high contrast in their cell membrane (or boundary) structure which was often encrusted with high-contrast precipitates. Measurements by EELS demonstrated that cell boundaries became saturated with low concentrations of Cr and the precipitates encrusting bacterial cells contained a reduced form of Cr in oxidation state + 3 or lower.

  11. Efficient light storage with reduced energy loss via nonlinear compensation in rubidium vapor

    Science.gov (United States)

    Wang, Gang; Zhou, Wei; Chen, Hong-Li; Xue, Yan; Wu, Jin-Hui; Xu, Huai-Liang; Gao, Jin-Yue

    2016-06-01

    We report an experimental demonstration of efficient light storage based on a modified technique of electromagnetically induced transparency in hot rubidium vapor. By introducing an auxiliary pump field to go beyond the Λ -type configuration, we find that the undesired four-wave mixing can be greatly suppressed to result in sufficiently reduced energy loss of a probe pulse. The light storage efficiency can be as high as  ∼80% within the storage time of 100 ns with the pump field applied, which is almost 6 times larger than that in the absence of the pump field. We may also amend the light storage efficiency in a linear way by increasing the optical depth of our atomic vapor even without saturation effect. We obtain, in fact, an amplified probe pulse via Raman gain during light storage and retrieval, which should have practical applications in classical and quantum information processing.

  12. Electron energy loss spectroscopy study of Sr2-xGdxTiMnO6

    Science.gov (United States)

    Biskup, Nevenko; Alvarez-Serrano, Inmaculada; Veiga, Maria Luisa; Garcia-Hernandez, Mar; Lopez, Maria Luisa; Varela, Maria

    2012-02-01

    The newly synthesized double perovskite family Sr2-xGdxTiMnO6 (0energy loss spectroscopy. We find that, is spite of some precipitations of Mn and Ti rich regions that exist in 0.25<=x<=0.75, the manganese and titanium ions are generally well intermixed in both interior of the grains and on the grain boundaries. We discuss these results in the frame of highly non-linear electrical conductivity found in these materials.

  13. Complex suppression patterns distinguish between major energy loss effects in Quark-Gluon Plasma

    CERN Document Server

    Djordjevic, Magdalena

    2015-01-01

    Interactions of high momentum partons with Quark-Gluon Plasma created in relativistic heavy-ion collisions provide an excellent tomography tool for this new form of matter. Recent measurements for charged hadrons and unidentified jets at the LHC show an unexpected flattening of the suppression curves at high momentum, exhibited when either momentum or the collision centrality is changed. Furthermore, a limited data available for B probes indicate a qualitatively different pattern, as nearly the same flattening is exhibited for the curves corresponding to two opposite momentum ranges. We here show that the experimentally measured suppression curves are well reproduced by our theoretical predictions, and that the complex suppression patterns are due to an interplay of collisional, radiative energy loss and the dead-cone effect. Furthermore, for B mesons, we predict that the uniform flattening of the suppression indicated by the limited dataset is in fact valid across the entire span of the momentum ranges, whic...

  14. Subcellular localization of Cd in the root cells of Allium sativum by electron energy loss spectroscopy

    Indian Academy of Sciences (India)

    Donghua Liu; Ingrid Kottke

    2003-06-01

    The ultrastructural investigation of the root cells of Allium sativum L. exposed to three different concentrations of Cd (100 M, 1 mM and 10 mM) for 9 days was carried out. The results showed that Cd induced several significant ultrastructural changes – high vacuolization in cytoplasm, deposition of electron-dense material in vacuoles and nucleoli and increment of disintegrated organelles. Data from electron energy loss spectroscopy (EELS) revealed that Cd was localized in the electron-dense precipitates in the root cells treated with 10 mM Cd. High amounts of Cd were mainly accumulated in the vacuoles and nucleoli of cortical cells in differentiating and mature root tissues. The mechanisms of detoxification and tolerance of Cd are briefly explained.

  15. On the Diversity of Compact Objects within Supernova Remnants II: Energy Loss Mechanisms

    CERN Document Server

    Rogers, Adam

    2016-01-01

    Energy losses from isolated neutron stars are commonly attributed to the emission of electromagnetic radiation from a rotating point-like magnetic dipole in vacuum. This emission mechanism predicts a braking index $n=3$, which is not observed in highly magnetized neutron stars. Despite this fact, the assumptions of a dipole field and rapid early rotation are often assumed a priori, typically causing a discrepancy between the characteristic age and the associated supernova remnant (SNR) age. We focus on neutron stars with `anomalous' magnetic fields that have established SNR associations and known ages. Anomalous X-ray pulsars (AXPs) and soft gamma repeaters (SGRs) are usually described in terms of the magnetar model, which posits a large magnetic field established by dynamo action. The high magnetic field pulsars (HBPs) have extremely large magnetic fields just above QED scale (but below that of the AXPs and SGRs), and central compact objects (CCOs) may have buried fields that will emerge in the future as nas...

  16. Parton energy loss and momentum broadening at NLO in high temperature QCD plasmas

    CERN Document Server

    Ghiglieri, Jacopo

    2015-01-01

    We present an overview of a perturbative-kinetic approach to jet propagation, energy loss, and momentum broadening in a high temperature quark-gluon plasma. The leading-order kinetic equations describe the interactions between energetic jet-particles and a non-abelian plasma, consisting of on-shell thermal excitations and soft gluonic fields. These interactions include 22 scatterings, collinear bremsstrahlung, and drag and momentum diffusion. We show how the contribution from the soft gluonic fields can be factorized into a set of Wilson line correlators on the light cone. We review recent field-theoretical developments, rooted in the causal properties of these correlators, which simplify the calculation of the appropriate Wilson lines in thermal field theory. With these simplifications lattice measurements of transverse momentum broadening have become possible, and the kinetic equations describing parton transport have been extended to next-to-leading order in the coupling g.

  17. Variable scheduling to mitigate channel losses in energy-efficient body area networks.

    Science.gov (United States)

    Tselishchev, Yuriy; Boulis, Athanassios; Libman, Lavy

    2012-11-02

    We consider a typical body area network (BAN) setting in which sensor nodes send data to a common hub regularly on a TDMA basis, as defined by the emerging IEEE 802.15.6 BAN standard. To reduce transmission losses caused by the highly dynamic nature of the wireless channel around the human body, we explore variable TDMA scheduling techniques that allow the order of transmissions within each TDMA round to be decided on the fly, rather than being fixed in advance. Using a simple Markov model of the wireless links, we devise a number of scheduling algorithms that can be performed by the hub, which aim to maximize the expected number of successful transmissions in a TDMA round, and thereby significantly reduce transmission losses as compared with a static TDMA schedule. Importantly, these algorithms do not require a priori knowledge of the statistical properties of the wireless channels, and the reliability improvement is achieved entirely via shuffling the order of transmissions among devices, and does not involve any additional energy consumption (e.g., retransmissions). We evaluate these algorithms directly on an experimental set of traces obtained from devices strapped to human subjects performing regular daily activities, and confirm that the benefits of the proposed variable scheduling algorithms extend to this practical setup as well.

  18. Reflected electron energy loss microscopy (REELM) studies of metals, semiconductors and insulators

    Energy Technology Data Exchange (ETDEWEB)

    Paparazzo, E. [Istituto di Sruttura della Materia del CNR, Area della Ricerca di Roma, Tor Vergata, Via Fosso del Cavaliere 100, 00133 Rome (Italy)]. E-mail: paparazzo@ism.cnr.it

    2005-05-15

    The potential of reflected electron energy loss microscopy (REELM) are tested in surface and interface studies of metals, semiconductors and insulators. We present spectroscopic analyses of loss signals occurring at {approx}5-30 eV of the elastic peak, and microscopic analyses based on the same signals performed via spot mode, as well as via linescanning and imaging modes. Materials investigated include a UHV cleaved InSb surface, InP/SiO{sub 2} and GaAs/Au systems, W tips for use in an STM microscope, a ZrO{sub 2} single crystal, and an archaeological bronze covered with a thick patina. Advantages and shortcomings of REELM are outlined against the diagnostic value of parallel results obtained by scanning Auger microscopy (SAM) techniques. Although comparatively poor focussing powers preclude the attainment of high spatial resolution, and spectral interference problems may hinder the chemical characterization of multi-phase materials, REELM features unique capabilities. Among others, these include a chemical contrast that is much superior to that of SAM, the possibility of characterizing the coverage distribution of adlayer surface species, as well as of investigating the microchemistry of insulators' surfaces. The first application of REELM in the analysis of archaeological materials is presented.

  19. Neutrino energy loss rates and positron capture rates on $^{55}$Co for presupernova and supernova physics

    CERN Document Server

    Nabi, Jameel-Un; 10.1103/PhysRevC.77.055802

    2011-01-01

    Proton-neutron quasi-particle random phase approximation (pn-QRPA) theory has recently being used for calculation of stellar weak interaction rates of $fp$-shell nuclide with success. Neutrino losses from proto-neutron stars play a pivotal role to decide if these stars would be crushed into black holes or explode as supernovae. The product of abundance and positron capture rates on $^{55}$Co is substantial and as such can play a role in fine tuning of input parameters of simulation codes specially in the presupernova evolution. Recently we introduced our calculation of capture rates on $^{55}$Co, in a luxurious model space of $7 \\hbar \\omega$, employing the pn-QRPA theory with a separable interaction. Simulators, however, may require these rates on a fine scale. Here we present for the first time an expanded calculation of the neutrino energy loss rates and positron capture rates on $^{55}$Co on an extensive temperature-density scale. These type of scale is appropriate for interpolation purposes and of greate...

  20. Variable Scheduling to Mitigate Channel Losses in Energy-Efficient Body Area Networks

    Directory of Open Access Journals (Sweden)

    Lavy Libman

    2012-11-01

    Full Text Available We consider a typical body area network (BAN setting in which sensor nodes send data to a common hub regularly on a TDMA basis, as defined by the emerging IEEE 802.15.6 BAN standard. To reduce transmission losses caused by the highly dynamic nature of the wireless channel around the human body, we explore variable TDMA scheduling techniques that allow the order of transmissions within each TDMA round to be decided on the fly, rather than being fixed in advance. Using a simple Markov model of the wireless links, we devise a number of scheduling algorithms that can be performed by the hub, which aim to maximize the expected number of successful transmissions in a TDMA round, and thereby significantly reduce transmission losses as compared with a static TDMA schedule. Importantly, these algorithms do not require a priori knowledge of the statistical properties of the wireless channels, and the reliability improvement is achieved entirely via shuffling the order of transmissions among devices, and does not involve any additional energy consumption (e.g., retransmissions. We evaluate these algorithms directly on an experimental set of traces obtained from devices strapped to human subjects performing regular daily activities, and confirm that the benefits of the proposed variable scheduling algorithms extend to this practical setup as well.

  1. Energy loss and charge state dependency of swift Nq+ ions scattered off a Pt(110)(1 x 2) surface

    NARCIS (Netherlands)

    Robin, A; Hatke, N; Jensen, J; Plachke, D; Carstanjen, HD; Heiland, W

    2003-01-01

    We present new surface scattering results combining measurements of energy loss and charge state distributions of 0.7-1.4 MeV Nq+ (q = 1, 2) ions. The energy range is still below the bulk stopping power maximum and charge exchange occurs. The projectiles scatter from a Pt(110)(1 x 2) single crystal

  2. Effects of intermittent compared to continuous energy restriction on short-term weight loss and long-term weight loss maintenance.

    Science.gov (United States)

    Keogh, J B; Pedersen, E; Petersen, K S; Clifton, P M

    2014-06-01

    Effective strategies are needed to help individuals lose weight and maintain weight loss. The primary aim of this study was to investigate the effect of intermittent energy restriction (IER) compared to continuous energy restriction (CER) on weight loss after 8 weeks and weight loss maintenance after 12 months. Secondary aims were to determine changes in waist and hip measurements and diet quality. In a randomized parallel study, overweight and obese (body mass index [BMI] ≥ 27 kg m(-2)) women were stratified by age and BMI before randomization. Participants undertook an 8-week intensive period with weight, waist and hip circumference measured every 2 weeks, followed by 44 weeks of independent dieting. A food frequency questionnaire was completed at baseline and 12 months, from which diet quality was determined. Weight loss was not significantly different between the two groups at 8 weeks (-3.2 ± 2.1 kg CER, n = 20, -2.0 ± 1.9 kg IER, n = 25; P = 0.06) or at 12 months (-4.2 ± 5.6 kg CER, n = 17 -2.1 ± 3.8 kg IER, n = 19; P = 0.19). Weight loss between 8 and 52 weeks was -0.7 ± 49 kg CER vs. -1 ± 1.1 kg IER; P = 0.6. Waist and hip circumference decreased significantly with time (P intermittent dieting was as effective as continuous dieting over 8 weeks and for weight loss maintenance at 12 months. This may be useful for individuals who find CER too difficult to maintain.

  3. Influence on electron energy loss spectroscopy of the niobium-substituted uranium atom: A density functional theory study

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We present the electronic structure and electron energy loss spectroscopy (EELS) for uranium, niobium and U3Nb in which uranium is substituted by niobium. Comparing the electronic structures and optical properties for uranium, niobium and U3Nb, we found that when niobium atom replaces uranium atom in the center lattice, density of state (DOS) of U3Nb shifts downward to low energy. Niobium affects DOS forfand d electrons more than that for p and s electrons. U3Nb is similar to uranium for the electronic energy loss spectra.

  4. Model for forecasting of monthly average insulation at ground level taking into account the radiation absorption losses crossing atmosphere in the thermal solar applications; Modelo de previsao da insolacao media mensal ao nivel do solo levando em conta a perda por absorcao na atmosfera em aplicacoes solares termicas

    Energy Technology Data Exchange (ETDEWEB)

    Camargo, J.C.; Apolinario, F.R.; Silva, E.P. da [Universidade Estadual de Campinas, SP (Brazil). Lab. de Hidrogenio]. E-mails: joaoc@fem.unicamp.br; rezende@ifi.unicamp.br; lh2ennio@ifi.unicamp.br

    2000-07-01

    The use of the solar energy, for thermal or photovoltaic ends, depends basically on the amount of radiation that reaches the ground in the place where desires to carry through this use, defining the necessary area of the collectors, or panels, that in turn are the main components of the final cost of the system and, therefore, of the viability or not on its use. The incident radiation in the terrestrial surface is minor that one reaches the top of the atmosphere due to the absorption and dispersion factors. The objective of this work is to present a model of forecast the monthly average radiation for ends of use in systems of flat solar collectors for heating water, in the city of Campinas - Sao Paulo, Brazil. This work has been developed by the Hydrogen Laboratory of the Institute of Physics of the UNICAMP, being also used for other applications with solar energy. Based in the radiation data, taken from a local station, a theoretical study was developed to calculate a parameter of loss of radiation when this cross the atmosphere. This Kt loss factor, has basic importance for the knowledge of the effective available energy for use. With this data it is possible to determine, on the basis of the incident radiation in the top of the atmosphere, the value of the radiation on a surface. (author)

  5. Energy loss and coronary flow simulation following hybrid stage I palliation: a hypoplastic left heart computational fluid dynamic model.

    Science.gov (United States)

    Shuhaiber, Jeffrey H; Niehaus, Justin; Gottliebson, William; Abdallah, Shaaban

    2013-08-01

    The theoretical differences in energy losses as well as coronary flow with different band sizes for branch pulmonary arteries (PA) in hypoplastic left heart syndrome (HLHS) remain unknown. Our objective was to develop a computational fluid dynamic model (CFD) to determine the energy losses and pulmonary-to-systemic flow rates. This study was done for three different PA band sizes. Three-dimensional computer models of the hybrid procedure were constructed using the standard commercial CFD softwares Fluent and Gambit. The computer models were controlled for bilateral PA reduction to 25% (restrictive), 50% (intermediate) and 75% (loose) of the native branch pulmonary artery diameter. Velocity and pressure data were calculated throughout the heart geometry using the finite volume numerical method. Coronary flow was measured simultaneously with each model. Wall shear stress and the ratio of pulmonary-to-systemic volume flow rates were calculated. Computer simulations were compared at fixed points utilizing echocardiographic and catheter-based metric dimensions. Restricting the PA band to a 25% diameter demonstrated the greatest energy loss. The 25% banding model produced an energy loss of 16.76% systolic and 24.91% diastolic vs loose banding at 7.36% systolic and 17.90% diastolic. Also, restrictive PA bands had greater coronary flow compared with loose PA bands (50.2 vs 41.9 ml/min). Shear stress ranged from 3.75 Pascals with restrictive PA banding to 2.84 Pascals with loose banding. Intermediate PA banding at 50% diameter achieved a Qp/Qs (closest to 1) at 1.46 systolic and 0.66 diastolic compared with loose or restrictive banding without excess energy loss. CFD provides a unique platform to simulate pressure, shear stress as well as energy losses of the hybrid procedure. PA banding at 50% provided a balanced pulmonary and systemic circulation with adequate coronary flow but without extra energy losses incurred.

  6. A Two-stage Optimal Network Reconfiguration Approach for Minimizing Energy Loss of Distribution Networks Using Particle Swarm Optimization Algorithm

    Directory of Open Access Journals (Sweden)

    Wei-Tzer Huang

    2015-12-01

    Full Text Available This study aimed to minimize energy losses in traditional distribution networks and microgrids through a network reconfiguration and phase balancing approach. To address this problem, an algorithm composed of a multi-objective function and operation constraints is proposed. Network connection matrices based on graph theory and the backward/forward sweep method are used to analyze power flow. A minimizing energy loss approach is developed for network reconfiguration and phase balancing, and the particle swarm optimization (PSO algorithm is adopted to solve this optimal combination problem. The proposed approach is tested on the IEEE 37-bus test system and the first outdoor microgrid test bed established by the Institute of Nuclear Energy Research (INER in Taiwan. Simulation results demonstrate that the proposed two-stage approach can be applied in network reconfiguration to minimize energy loss.

  7. Predictions for the energy loss of light ions in laser-generated plasmas at low and medium velocities.

    Science.gov (United States)

    Cayzac, W; Bagnoud, V; Basko, M M; Blažević, A; Frank, A; Gericke, D O; Hallo, L; Malka, G; Ortner, A; Tauschwitz, An; Vorberger, J; Roth, M

    2015-11-01

    The energy loss of light ions in dense plasmas is investigated with special focus on low to medium projectile energies, i.e., at velocities where the maximum of the stopping power occurs. In this region, exceptionally large theoretical uncertainties remain and no conclusive experimental data are available. We perform simulations of beam-plasma configurations well suited for an experimental test of ion energy loss in highly ionized, laser-generated carbon plasmas. The plasma parameters are extracted from two-dimensional hydrodynamic simulations, and a Monte Carlo calculation of the charge-state distribution of the projectile ion beam determines the dynamics of the ion charge state over the whole plasma profile. We show that the discrepancies in the energy loss predicted by different theoretical models are as high as 20-30%, making these theories well distinguishable in suitable experiments.

  8. First Measurements of the Unique Influence of Spin on the Energy Loss of Ultrarelativistic Electrons in Strong Electromagnetic Fields

    Science.gov (United States)

    Kirsebom, K.; Mikkelsen, U.; Uggerhøj, E.; Elsener, K.; Ballestrero, S.; Sona, P.; Vilakazi, Z. Z.

    2001-07-01

    Although some authors have claimed that the effect is not detectable, we show experimentally for the first time that as the quantum parameter χ grows beyond 1, an increasingly large part of the hard radiation emitted arises from the spin of the electron. Results for the energy loss of electrons in the energy range 35-243 GeV incident on a W single crystal are presented. Close to the axial direction the strong electromagnetic fields induce a radiative energy loss which is significantly enhanced compared to incidence on an amorphous target. In such continuously strong fields, the radiation process is highly nonperturbative for ultrarelativistic particles and a full quantum description is needed. The remarkable effect of spin flips and the energy loss is connected to the presence of a field comparable in magnitude to the Schwinger critical field, E0 = m2c3/eħ, in the rest frame of the emitting electron.

  9. Comparison of energy-budget evaporation losses from two morphometrically different Florida seepage lakes

    Science.gov (United States)

    Sacks, L.A.; Lee, T.M.; Radell, M.J.

    1994-01-01

    Evaporation was computed by the energy-budget method for two north Florida lakes with similar surface areas but different depths, for the period May 1989 to December 1990. Lake Barco, in north-central Florida, is shallow, with an average depth of 3 m; Lake Five-O, in the Florida panhandle, is considerably deeper, with an average depth of 9.5 m. As a result, the thermal regime and seasonal evaporation rates of the lakes are different. Evaporation from the shallower lake was higher than that from the deeper lake in the winter and spring. In the late summer and autumn, however, the situation is reversed. Evaporation from the shallow lake is directly related to the amount of incoming shortwave radiation because of its limited ability to store energy. The lag in evaporation at the deeper lake is a function of the greater amount of heat that it seasonally stores and releases. The difference in annual evaporation between Lake Barco (151 cm year-1) and Lake Five-O (128 cm year-1) is related to differences in regional climatic conditions between the two sites. Additionally, higher than normal evaporation rates at the two lakes are probably related to drought conditions experienced in north Florida during 1990, which resulted in higher temperatures and more incoming radiation. Monthly evaporation at Lake Barco could usually be estimated within 10% of the energy-budget evaporation using a constant pan coefficient. This lake may be representative of other shallow lakes that do not store considerable heat. Monthly evaporation at Lake Five-O, however, could not be estimated accurately by using an annual pan coefficient because of the large seasonal influence of change in stored heat. Monthly mass-transfer evaporation compared well with energy-budget evaporation at Lake Barco, but did not compare well at Lake Five-O. These errors may also be associated with changes in heat storage. Thus, the thermal regime of the lake must be considered to estimate accurately the seasonal

  10. Electronic structure and electron energy-loss spectroscopy of ZrO2 zirconia

    Science.gov (United States)

    Dash, L. K.; Vast, Nathalie; Baranek, Philippe; Cheynet, Marie-Claude; Reining, Lucia

    2004-12-01

    The atomic and electronic structures of zirconia are calculated within density functional theory, and their evolution is analyzed as the crystal-field symmetry changes from tetrahedral [cubic (c-ZrO2) and tetragonal (t-ZrO2) phases] to octahedral (hypothetical rutile ZrO2 ), to a mixing of these symmetries (monoclinic phase, m-ZrO2 ). We find that the theoretical bulk modulus in c-ZrO2 is 30% larger than the experimental value, showing that the introduction of yttria in zirconia has a significant effect. Electronic structure fingerprints which characterize each phase from their electronic spectra are identified. We have carried out electron energy-loss spectroscopy experiments at low momentum transfer and compared these results to the theoretical spectra calculated within the random phase approximation. We show a dependence of the valence and 4p ( N2,3 edge) plasmons on the crystal structure, the dependence of the latter being brought into the spectra by local-field effects. Last, we attribute low energy excitations observed in EELS of m-ZrO2 to defect states 2eV above the top of the intrinsic valence band, and the EELS fundamental band gap value is reconciled with the 5.2 or 5.8eV gaps determined by vacuum ultraviolet spectroscopy.

  11. Mapping boron in silicon solar cells using electron energy-loss spectroscopy

    DEFF Research Database (Denmark)

    -doped layers. The typical boron concentration in the p-doped layer is ~10^21cm -3 and should not exceed 1017cm-3 in the neighbouring intrinsic (i) layer [1], where it acts as a charge recombination centre and decreases the internal electric field [2]. The detection of low boron concentrations with high spatial...... resolution using TEM is highly challenging [3]. Recently, scanning TEM (STEM) combined with electron energy-loss spectroscopy (EELS) and spherical aberration-correction has allowed the direct detection of dopant concentration of 10^20cm-3 in 65-nm-wide silicon devices [4]. Here, we prepare TEM samples...... by focused ion beam milling in order to map the boron distribution across a 200-nm-thick n-p amorphous silicon junction using energy-filtered TEM and EELS spectrum acquisition. EELS line scans are used to detect boron concentrations as low as 10^20cm-3. We also use monochromated EELS to measure changes...

  12. Longitudinal assessment of food intake, fecal energy loss, and energy expenditure after Roux-en-Y gastric bypass surgery in high-fat-fed obese rats.

    Science.gov (United States)

    Shin, Andrew C; Zheng, Huiyuan; Townsend, R Leigh; Patterson, Laurel M; Holmes, Gregory M; Berthoud, Hans-Rudolf

    2013-04-01

    The efficacy of Roux-en-Y gastric bypass (RYGB) surgery to produce weight loss has been well-documented, but few studies have measured the key components of energy balance, food intake, and energy expenditure longitudinally. Male Sprague-Dawley rats on a high-fat diet underwent either RYGB, sham operation, or pair feeding and were compared to chow-fed lean controls. Body weight and composition, food intake and preference, energy expenditure, fecal output, and gastric emptying were monitored before and up to 4 months after intervention. Despite the recovery of initially decreased food intake to levels slightly higher than before surgery and comparable to sham-operated rats after about 1 month, RYGB rats maintained a lower level of body weight and fat mass for 4 months that was not different from chow-fed age-matched controls. Energy expenditure corrected for lean body mass at 1 and 4 months after RYGB was not different from presurgical levels and from all other groups. Fecal energy loss was significantly increased at 6 and 16 weeks after RYGB compared to sham operation, and there was a progressive decrease in fat preference after RYGB. In this rat model of RYGB, sustained weight loss is achieved by a combination of initial hypophagia and sustained increases in fecal energy loss, without change in energy expenditure per lean mass. A shift away from high-fat towards low-fat/high-carbohydrate food preference occurring in parallel suggests long-term adaptive mechanisms related to fat absorption.

  13. Determination of energy loss of 1200 keV deuterons along axial and planar channels of Si

    Energy Technology Data Exchange (ETDEWEB)

    Shafiei, S.; Lamehi-Rachti, M., E-mail: mlamehi@aeoi.org.ir

    2015-02-15

    In this paper, the energy loss of 1200 keV deuterons along the <1 0 0> and <1 1 0> axes as well as the {1 0 0} and {1 1 0} planes of Si were determined by the simulation of the channeling Rutherford backscattering spectra. The simulation was done by taking two considerations into account: (i) a minimum random component of the beam which enters the sample because of the scattering ions from the surface, (ii) the dechanneling starts at greater penetration depths, x{sub Dech}. Moreover, it was assumed that the dechanneling follows a Gompertz type sigmoidal function with two parameters k and x{sub c} which present the dechanneling rate and range, respectively. The best simulation parameters, penetration depth at which the dechanneling starts, energy loss and dechanneling rate and range, were chosen by using the Levenberg–Marquardt algorithm. The experimental results are well reproduced by this simulation. The ratio of channeling energy loss to the random is changed from 0.63 ± 0.02 along the <1 1 0> axial channel to the 0.91 ± 0.02 along the {1 0 0} planar direction. The differences in the energy loss and the dechanneling process along the axial and planar channels are attributed to the potential barrier and the fractional area of each channel blocked by atoms. The ratio of channeling to random energy loss of deuterons along the <1 0 0> axial direction is in agreement with another reference.

  14. Increasing energy flux to decrease the biological drive toward weight regain after weight loss - A proof-of-concept pilot study.

    Science.gov (United States)

    Paris, Hunter L; Foright, Rebecca M; Werth, Kelsey A; Larson, Lauren C; Beals, Joseph W; Cox-York, Kimberly; Bell, Christopher; Melby, Christopher L

    2016-02-01

    Weight loss induces compensatory biological adjustments that increase hunger and decrease resting metabolic rate (RMR), which increase propensity for weight regain. In non-obese adults high levels of physical activity coupled with high energy intake (high energy flux) are associated with higher RMR and reduced hunger. We tested the possibility that a high flux state attenuates the increase in hunger and the decrease in RMR characteristic of diet-induced weight loss. Six obese adults [age (mean ± SE) = 42 ± 12 y; body mass index (BMI) = 35.7 ± 3.7 kg/m(2)] underwent measures of RMR, the thermic effect of a meal (TEM), and fasting and postprandial measures of hunger and fullness as well as plasma glucose and insulin. Following weight loss, subjects completed two 5-day conditions of energy balance in random order-Low Flux (LF): sedentary with energy intake (EI) = RMR (kcal/d) × 1.35; and High Flux (HF): net exercise energy cost of ∼500 kcal/d and EI = RMR (kcal/d) × 1.7. RMR was measured daily for each flux condition. The morning following each of the respective experimentally controlled HF and LF conditions (flux day 5), they underwent the same pre-weight loss tests and also reported their perceptions of hunger and fullness during the previous four days of HF and LF, respectively. Average daily RMR was higher during HF (1926 ± 138 kcal/day) compared to LF (1847 ± 126 kcal/day; P weight loss, compared to a sedentary LF state of energy balance, a short-term HF energy balance state is associated with higher RMR, lower perceived hunger, and greater perceived fullness, all of which could help attenuate the biologic drive to regain weight. Given the pilot nature of this study and the relatively short period of time spent in the high and low flux states, future research is needed to address this research question in a larger sample over a longer time period. Copyright © 2015 European Society for Clinical Nutrition and Metabolism

  15. Validation of a novel protocol for calculating estimated energy requirements and average daily physical activity ratio for the US population: 2005-2006.

    Science.gov (United States)

    Archer, Edward; Hand, Gregory A; Hébert, James R; Lau, Erica Y; Wang, Xuewen; Shook, Robin P; Fayad, Raja; Lavie, Carl J; Blair, Steven N

    2013-12-01

    To validate the PAR protocol, a novel method for calculating population-level estimated energy requirements (EERs) and average physical activity ratio (APAR), in a nationally representative sample of US adults. Estimates of EER and APAR values were calculated via a factorial equation from a nationally representative sample of 2597 adults aged 20 and 74 years (US National Health and Nutrition Examination Survey; data collected between January 1, 2005, and December 31, 2006). Validation of the PAR protocol-derived EER (EER(PAR)) values was performed via comparison with values from the Institute of Medicine EER equations (EER(IOM)). The correlation between EER(PAR) and EER(IOM) was high (0.98; Pobese (body mass index [BMI] ≥30) men to 148 kcal/d (5.7% higher) in obese women. The 2005-2006 EERs for the US population were 2940 kcal/d for men and 2275 kcal/d for women and ranged from 3230 kcal/d in obese (BMI ≥30) men to 2026 kcal/d in normal weight (BMI obesity and age. For men and women, the APAR values were 1.53 and 1.52, respectively. Obese men and women had lower APAR values than normal weight individuals (P¼.023 and P¼.015, respectively) [corrected], and younger individuals had higher APAR values than older individuals (Pphysical activity and health. Copyright © 2013 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

  16. Neuromodulation targeted to the prefrontal cortex induces changes in energy intake and weight loss in obesity.

    Science.gov (United States)

    Gluck, Marci E; Alonso-Alonso, Miguel; Piaggi, Paolo; Weise, Christopher M; Jumpertz-von Schwartzenberg, Reiner; Reinhardt, Martin; Wassermann, Eric M; Venti, Colleen A; Votruba, Susanne B; Krakoff, Jonathan

    2015-11-01

    Obesity is associated with decreased activity in the prefrontal cortex. Transcranial direct current stimulation (tDCS) modifies cortical excitability and may facilitate improved control of eating. The energy intake (EI) and body weight in subjects who received cathodal versus sham (study 1) and subsequent anodal versus sham (study 2) tDCS aimed at the left dorsolateral prefrontal cortex (LDLPFC) were measured. Nine (3m, 6f) healthy volunteers with obesity (94 ± 15 kg [M ± SD]; 42 ± 8 y) were admitted as inpatients for 9 days to participate in a double-blind, randomized, placebo-controlled crossover experiment. Study 1: following 5 days of a weight-maintaining diet, participants received cathodal or sham tDCS (2 mA, 40 min) on three consecutive mornings and then ate ad libitum from a computerized vending machine, which recorded EI. Weight was measured daily. Study 2: participants repeated the study, maintaining original assignment to active (this time anodal) and sham. Participants tended to consume fewer kilocalories per day (P = 0.07), significantly fewer kilocalories from soda (P = 0.02) and fat (P = 0.03), and had a greater % weight loss (P = 0.009) during anodal versus cathodal tDCS. The results indicated a role for the LDLPFC in obesity and food intake. This proof of concept study suggested, for the first time, the potential application of anodal tDCS to facilitate weight loss. © 2015 The Obesity Society.

  17. Modifications to the Method of Modal Strain Energy for Improved Estimates of Loss Factors for Damped Structures

    OpenAIRE

    Torvik, Peter J.; Brian Runyon

    2007-01-01

    The method of Modal Strain Energy (MSE) enables predictions of modal loss factors for vibrating systems from finite element analyses without evaluation of a complex-valued frequency response or a complex-valued frequency. While the method is simple, some error results; especially if the dissipative material has the high loss factor characteristic of materials added to increase system damping. Several methods for reducing this error through modifications to MSE have been suggested. In this wor...

  18. Energy loss of terahertz electromagnetic waves by nano-sized connections in near-self-complementary metallic checkerboard patterns

    Science.gov (United States)

    Takano, Keisuke; Tanaka, Yoku; Moreno, Gabriel; Chahadih, Abdallah; Ghaddar, Abbas; Han, Xiang-Lei; Vaurette, François; Nakata, Yosuke; Miyamaru, Fumiaki; Nakajima, Makoto; Hangyo, Masanori; Akalin, Tahsin

    2017-08-01

    The design of a self-complementary metallic checkerboard pattern achieves broadband, dispersion-less, and maximized absorption, concentrating in deep subwavelength resistive connections between squares, without any theoretical limitation on the energy absorbing area. Here, we experimentally and numerically investigate the electromagnetic response in the limit of extremely small connections. We show that finite conductivity and randomness in a near-self-complementary checkerboard pattern play a crucial role in producing a frequency-independent energy loss in the terahertz frequency region. Here, metals behave like an almost perfect conductor. When the checkerboard pattern approaches the perfect self-complementary pattern, the perfect conductor approximation spontaneously breaks down, owing to the finite conductivity at the nano-scale connection, leading to broadband absorption. It is also shown that the random connections between metallic squares also lead to broadband and maximized energy loss through scattering loss, similar to finite conductivity.

  19. Influence of quark energy loss on extracting nuclear sea quark distribution from nuclear Drell-Yan experimental data

    Institute of Scientific and Technical Information of China (English)

    DUAN Chun-Gui; LIU Na

    2009-01-01

    By means of two typical kinds of quark energy loss parametrization and the nuclear parton distribu-tions determined only with lepton-nuclear deep inelastic scattering experimental data, a leading order analysis is performed on the proton-induced Drell-Yau differential cross section ratios of tungsten versus deuterium as a function of the quark momentum fraction in the beam proton and target nuclei. It is found that the theoretical results with quark energy loss are in good agreement with the experimental data. The quark energy loss effect produces approximately 3% to 11% suppression on the Drell-Yan differential cross section ratios RW/D in the range 0.05 ≤ x2≤ 0.3. The application of nuclear Drell-Yan data with heavy targets is remarkably subject to difficulty in the constraint of the nuclear sea quark distribution.

  20. Effect of georesource–consumer process flows on coal loss in energy supply of the Polar regions in Yakutia

    Science.gov (United States)

    Tkach, SM; Gavrilov, VL

    2017-02-01

    It is shown that the process flows of mining, haulage and utilization of coal in the Polar regions in Yakutia feature high quantitative and qualitative loss. In case the process flows are considered as integrated systems aimed at the overall performance efficiency, it is possible to reduce the loss per each individual chain loop. The authors formulate approaches intended to lower total loss of coal in process flows. The geotechnical and organizational solutions are put forward to improve and stabilize quality of fuel used by local fuel and energy industry.

  1. In situ analysis of gas composition by electron energy-loss spectroscopy for environmental transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Crozier, Peter A., E-mail: crozier@asu.edu [School for Engineering of Matter, Transport and Energy, Arizona State University Tempe, AZ 85287-6106 (United States); Chenna, Santhosh [School for Engineering of Matter, Transport and Energy, Arizona State University Tempe, AZ 85287-6106 (United States)

    2011-02-15

    We have developed methods for using in situ electron energy-loss spectroscopy (EELS) to perform quantitative analysis of gas in an environmental transmission electron microscope. Inner-shell EELS was able to successfully determine the composition of gas mixtures with an accuracy of about 15% or better provided that some precautions are taken during the acquisition to account for the extended gas path lengths associated with the reaction cell. The unique valence-loss spectrum associated with many gases allowed simple methodologies to be developed to determine gas composition from the low-loss region of the spectrum from a gas mixture. The advantage of the valence loss approach is that it allows hydrogen to be detected and quantified. EELS allows real-time analysis of the volume of gas inside the reaction cell and can be performed rapidly with typical acquisition times of a few seconds or less. This in situ gas analysis can also be useful for revealing mass transport issues associated with the differential gas diffusion through the system. -- Research Highlights: {yields} In situ electron energy-loss spectroscopy for gas analysis in ETEM. {yields} Compositional accuracy of about 15% or better. {yields} Can use core-loss or valence loss spectroscopy. {yields} Can detect mass transport property of gas handling system.

  2. Jet energy loss in Boson-jet events in PbPb collisions at 5.02 TeV with CMS

    CERN Document Server

    Bi, Ran

    2017-01-01

    A typical approach to study the medium produced in heavy ion collisions is to understand the passage of elementary particles through it. As Z bosons and photons do not participate in the strong interaction, their correlation with jets within the same event is a clean probe of the medium-induced energy loss of (predominantly) quark jets. In this analysis, Z+jet and photon+jet correlations are studied using the high statistics PbPb and pp data taken at a center-of-mass energy of $\\sqrt{s_{NN}}$ = 5.02 TeV with the CMS detector. The evolution of azimuthal angular distributions and average momentum imbalance between the jet and Z or photon as a function of transverse momentum of the color neutral probe will be presented. In addition the jet $I_{AA}$, as a function of photon $p_{T}$ and collision centrality is studied.

  3. Energy loss of a fast-electron beam due to the excitation of collective oscillation in hot plasma

    Institute of Scientific and Technical Information of China (English)

    Ma Jin-Yi; Qiu Xi-Jun; Zhu Zhi-Yuan

    2004-01-01

    Energy loss due to a fast-electron beam interacting with the hot plasma at a high density is analysed theoretically.By splitting the particle density fluctuations into the individual part due to the random thermal motion of the individual electrons and the collective part due to plasma-wave excitation, we are concerned with the collective interaction of the relativistic plasma electrons resulting from the Coulomb interactions. Consequently, we derive the frequency of the hot plasma and the "Debye length" with the modification of the relativistic effect. And finally we calculate the energy loss of a fast-electron beam due to the excitation of collective oscillation in the hot plasma.

  4. Blue and red shifts of interband transition energy in supported Au nanoclusters on SiO2 and HOPG investigated by reflection electron energy-loss spectroscopy.

    Science.gov (United States)

    Borisyuk, P V; Troyan, V I; Pushkin, M A; Borman, V D; Tronin, V N

    2012-11-01

    Gold nanoclusters supported on SiO2 and HOPG are experimentally investigated by the reflection electron energy-loss spectroscopy. Two different trends in the size-dependence of the position of the energy-loss peak corresponding to the interband Au 5d --> 6s6p transition is observed: a blue shift for Au clusters on SiO2 and a red shift for Au clusters on HOPG. The different behaviors are qualitatively explained by the influence of the substrate on the spectrum of electronic states in Au nanoclusters.

  5. High resolution electron energy loss spectroscopy on graphene/SiC(0001)

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Roland J.; Endlich, Michael; Haensel, Thomas; Ahmed, Syed Imad U. [Institut fuer Physik und Institut fuer Mikro- und Nanotechnologien, TU Ilmenau (Germany); Seyller, Thomas [Lehrstuhl fuer Technische Physik, Universitaet Erlangen-Nuernberg, Erlangen-Nuernberg (Germany); Schaefer, Juergen A. [Institut fuer Physik und Institut fuer Mikro- und Nanotechnologien, TU Ilmenau (Germany); Department of Physics, Montana State University, Bozeman, Montana (United States)

    2010-07-01

    The recent experimental realization of single-layer graphene sheets has led to intense efforts to understand its electronic and vibrational properties in the context of solid state materials physics. In this contribution we investigate the interaction of epitaxial graphene with SiC(0001) using high resolution electron energy loss spectroscopy (HREELS). The focus in this contribution is on the coupling of charge carriers in semi-metallic graphene with the optical phonons of SiC(0001). Due to this coupling the surface optical phonons, the so called Fuchs-Kliewer phonons, completely vanish and two new modes {omega}{sub -} and {omega}{sub +} are observed instead. The energetic position and intensity of these modes depend strongly upon the momentum transferred parallel to the interface (q {sub parallel}), which we investigated in the regime of 0.005 A{sup -1} to 0.03A{sup -1}. Simulating our HREELS-data using dielectric theory and solving the Poisson- and Schroedinger equations self consistently allows us to determine the carrier density distribution and the conduction band edge normal to the plane of the graphene/SiC heterostructure.

  6. Quasinormal mode theory and modelling of electron energy loss spectroscopy for plasmonic nanostructures

    Science.gov (United States)

    Ge, Rong-Chun; Hughes, Stephen

    2016-05-01

    Understanding light-matter interactions using localized surface plasmons (LSPs) is of fundamental interest in classical and quantum plasmonics and has a wide range of applications. In order to understand the spatial properties of LSPs, electron energy loss spectroscopy (EELS) is a common and powerful method of spatially resolving the extreme localized fields that can be obtained with metal resonators. However, modelling EELS for general shaped resonators presents a major challenge in computational electrodynamics, requiring the full photon Green function as a function of two space points and frequency. Here we present an intuitive and computationally simple method for computing EELS maps of plasmonic resonators using a quasinormal mode (QNM) expansion technique. By separating the contribution of the QNM and the bulk material, we give closed-form analytical formulas for the plasmonic QNM contribution to the EELS maps. We exemplify our technique for a split ring resonator, a gold nanorod, and a nanorod dimer structure. The method is accurate, intuitive, and gives orders of magnitude improvements over direct dipole simulations that numerically solve the full 3D Maxwell equations. We also show how the same QNM Green function can be used to obtain the Purcell factor (and projected local density of optical states) from quantum dipole emitters or two level atoms, and we demonstrate how the spectral features differ in general to the EELS spectrum.

  7. Spatial and energy-loss measurements of a PANDA STT prototype

    Energy Technology Data Exchange (ETDEWEB)

    Ohannessian, Haroutioun; Wintz, Peter; Ritman, James [Forschungszentrum Juelich (Germany); Collaboration: PANDA-Collaboration

    2015-07-01

    The PANDA experiment will study charmonium and open charm physics, gluonic excitations and the nucleon structure by means of interaction of antiprotons with protons and nuclei. The PANDA central tracker consists of 4636 straw tube drift detectors, which are arranged in a hexagonal layout. The straws have a diameter of 10 mm and a wall thickness of 27 μm and are filled with a mixture of Ar/CO{sub 2} (9:1) gas operating at a high voltage of about 1800 V at a pressure of 2 bar absolute. The readout system provides drift time information for trajectory reconstruction and momentum determination. Moreover, specific energy-loss information is provided for particle identification (p,K,π separation <0.8 GeV/c). The STT prototype consists of 96 straws, which are being tested by cosmic and beam measurements in the Forschungszentrum Juelich. Measurements are being performed using the COSY accelerator to provide beams of protons and deuterons at momenta in the range of 0.6-3 GeV/c. This information will be used for particle identification (p/d separation). This presentation shows the results of the different measurements that have been taken recently at COSY. In addition, further improvements on the next STT prototype are discussed.

  8. Systematic Comparison of Jet Energy-Loss Schemes in a realistic hydrodynamic medium

    CERN Document Server

    Bass, Steffen A; Majumder, Abhijit; Nonaka, Chiho; Qin, Guang-You; Renk, Thorsten; Ruppert, Jörg

    2008-01-01

    We perform a systematic comparison of three different jet energy-loss approaches. These include the Armesto-Salgado-Wiedemann scheme based on the approach of Baier-Dokshitzer-Mueller-Peigne-Schiff (BDMPS/ASW), the Higher Twist approach (HT) and a scheme based on the approach of Arnold-Moore-Yaffe (AMY). In this comparison, an identical medium evolution will be utilized for all three approaches: not only does this entail the use of the same realistic three-dimensional relativistic fluid dynamics (RFD) simulation, but also includes the use of identical initial parton-distribution functions and final fragmentation functions. We are, thus, in a unique position, not only to isolate fundamental differences between the various approaches, but also to make rigorous calculations for different experimental measurements using "state of the art" components. All three approaches are reduced to a version which contains only one free tunable parameter, this is then related to the well known transport parameter $\\hat{q}$. We...

  9. Energy-loss function in the two-pair approximation for the electron liquid

    Science.gov (United States)

    Bachlechner, M. E.; Holas, A.; Böhm, H. M.; Schinner, A.

    1996-07-01

    The imaginary part of the proper polarizability, Im Π, arising due to excitations of two electron-hole pairs, is studied in detail for electron systems of arbitrary dimensionality, and taking into account arbitrary degeneracy of the electron bands. This allows an application to semiconductors with degenerate valleys, and to ferromagnetic metals. The results obtained not only confirm expressions already known for paramagnetic systems in the high-frequency region, but are also rigorously shown to be valid for all frequencies outside the particle-hole continuum. For a sufficiently high momentum transfer a cutoff frequency (below which Im Π=0) is established for not only two-pair but also any n-pair processes. In contrast, there is no upper cutoff for n>~1. The energy-loss function, including the discussed two-pair contributions, is calculated. The effects of screening are investigated. Numerical results, illustrating various aspects and properties of this function, especially showing finite-width plasmon peaks, are obtained for a two-dimensional electron gas.

  10. Calibration of ionization energy loss at relativistic rise with STAR Time Projection Chamber

    CERN Document Server

    Xu, Yichun; Bichsel, Hans; Dong, Xin; Fachini, Patricia; Fisyak, Yuri; Kocolosky, Adam; Mohanty, Bedanga; Netrakanti, Pawan; Ruan, Lijuan; Suarez, Maria Cristina; Tang, Zebo; van Buren, Gene; Xu, Zhangbu

    2008-01-01

    We derive a method to improve particle identification (PID) at high transverse momentum ($p_T$) using the relativistic rise of the ionization energy loss ($rdE/dx$) when charged particles traverse the Time Projection Chamber (TPC) at STAR. Electrons triggered and identified by the Barrel Electro-Magnetic Calorimeter (BEMC), pure protons and pions from $\\Lambda\\to p+\\pi^{-}$ ($\\bar{\\Lambda}\\to \\bar{p}+\\pi^{+}$), and $K^{0}_{S}\\to\\pi^{+}+\\pi^{-}$ decays are used to obtain the $dE/dx$ value and its width at given $\\beta\\gamma=p/m$. We found that the deviation of the $dE/dx$ from the Bichsel function can be up to $0.4\\sigma$ ($\\sim3%$) in p+p collisions at $\\sqrt{s_{NN}}=200$ GeV taken and subsequently calibrated in year 2005. The deviation is approximately a function of $\\beta\\gamma$ independent of particle species and can be described with a function of $f(x) = A+\\frac{B}{C+x^{2}}$. The deviations obtained with this method are used to re-calibrate the data sample from p+p collision for physics analysis of ident...

  11. Correlation analysis for energy losses, waiting times and durations of type I edge-localized modes in the Joint European Torus

    Science.gov (United States)

    Shabbir, A.; Verdoolaege, G.; Hornung, G.; Kardaun, O. J. W. F.; Zohm, H.; Contributors, JET

    2017-03-01

    Several important ELM control techniques are in large part motivated by the empirically observed inverse relationship between average ELM energy loss and ELM frequency in a plasma. However, to ensure a reliable effect on the energy released by the ELMs, it is important that this relation is verified for individual ELM events. Therefore, in this work the relation between ELM energy loss ≤ft({{W}\\text{ELM}}\\right) and waiting time ≤ft(Δ {{t}\\text{ELM}}\\right) is investigated for individual ELMs in a set of ITER-like wall plasmas in JET. A comparison is made with the results from a set of carbon-wall and nitrogen-seeded ITER-like wall JET plasmas. It is found that the correlation between W ELM and Δ {{t}\\text{ELM}} for individual ELMs varies from strongly positive to zero. Furthermore, the effect of the extended collapse phase often accompanying ELMs from unseeded JET ILW plasmas and referred to as the slow transport event (STE) is studied on the distribution of ELM durations, and on the correlation between W ELM and Δ {{t}\\text{ELM}} . A high correlation between W ELM and Δ {{t}\\text{ELM}} , comparable to CW plasmas is only found in nitrogen-seeded ILW plasmas. Finally, a regression analysis is performed using plasma engineering parameters as predictors for determining the region of the plasma operational space with a high correlation between W ELM and Δ {{t}\\text{ELM}} .

  12. Energy Loss of Charm Quark Observed via Dimuon Production in Pb-Pb Collisions at √snn= 5.5 TeV

    Institute of Scientific and Technical Information of China (English)

    DING Heng-Tong; ZHOU Dai-Cui; YIN Zhong-Bao

    2006-01-01

    @@ Based on the HVQMNR model of heavy flavour production and the BDMPS approach on parton energy loss, we have investigated the energy loss effect of charm quark on (di)muon spectra in forward rapidity region covered by ALICE forward muon spectrometer in Pb+Pb collisions at c.m. energy √snn = 5.5 TeV. Results show that(di)muon spectra are very sensitive to the charm quark energy loss and can provide valuable information on the energy loss of heavy flavours.

  13. Determination of fractional energy loss of waves in nearshore waters using an improved high-order Boussinesq-type model

    Institute of Scientific and Technical Information of China (English)

    HE Hailun; SONG Jinbao; Patrick J. Lynett; LI Shuang

    2009-01-01

    Fractional energy losses of waves due to wave breaking when passing over a submerged bar are studied systematically using a modified numerical code that is based on the high-order Boussinesq-type equations. The model is first tested by the additional experimental data, and the model's capability of simulating the wave transformation over both gentle slope and steep slope is demonstrated. Then, the model's breaking index is replaced and tested. The new breaking index, which is optimized from the several breaking indices, is not sensitive to the spatial grid length and includes the bottom slopes. Numerical tests show that the modified model with the new breaking index is more stable and efficient for the shallow-water wave breaking. Finally, the modified model is used to study the fractional energy losses for the regular waves propagating and breaking over a submerged bar. Our results have revealed that how the nonlinearity and the dispersion of the incident waves as well as the dimensionless bar height (normalized by water depth) dominate the fractional energy losses. It is also found that the bar slope (limited to gentle slopes that less than 1:10) and the dimensionless bar length (normalized by incident wave length) have negligible effects on the fractional energy losses.

  14. Visceral fat and weight loss in obese subjects : relationship to serum lipids, energy expenditure and sex hormones

    NARCIS (Netherlands)

    Leenen, R.

    1993-01-01

    This thesis describes the relationships between visceral fat accumulation and serum lipids, energy expenditure, and sex hormone levels in healthy obese men and premenopausal women undergoing weight loss therapy. The subjects, aged 27-51 years, with an initial body mass index of 28-38 kg/m &

  15. Mathematical modelling of frequency-dependent hysteresis and energy loss of FeBSiC amorphous alloy

    Science.gov (United States)

    Koprivica, Branko; Milovanovic, Alenka; Mitrovic, Nebojsa

    2017-01-01

    The aim of this paper is to present a novel mathematical model of frequency-dependent magnetic hysteresis. The major hysteresis loop in this model is represented by the ascending and descending curve over an arctangent function. The parameters of the hysteresis model have been calculated from a measured hysteresis loop of the FeBSiC amorphous alloy sample. A number of measurements have been performed with this sample at different frequencies of the sinusoidal excitation magnetic field. A variation of the coercive magnetic field with the frequency has been observed and used in the modelling of frequency-dependent hysteresis with the proposed model. A comparison between measured and modelled hysteresis loops has been presented. Additionally, the areas of the obtained hysteresis loops, representing the energy loss per unit volume, have been calculated and the dependence of the energy loss on the frequency is shown. Furthermore, two models of the frequency dependence of the coercivity and two models of the energy loss separation have been used for fitting the experimental and simulation results. The relations between these models and their parameters have been observed and analysed. Also, the relations between parameters of the hysteresis model and the parameters of the energy loss separation models have been analysed and discussed.

  16. Visceral fat and weight loss in obese subjects : relationship to serum lipids, energy expenditure and sex hormones

    NARCIS (Netherlands)

    Leenen, R.

    1993-01-01

    This thesis describes the relationships between visceral fat accumulation and serum lipids, energy expenditure, and sex hormone levels in healthy obese men and premenopausal women undergoing weight loss therapy. The subjects, aged 27-51 years, with an initial body mass index of 28-38 kg/m

  17. Habitual physical activity and plasma metabolomic patterns distinguish individuals with low vs. high weight loss during controlled energy restriction

    Science.gov (United States)

    Weight loss (WL) induced by energy restriction is highly variable even in controlled clinical trials. An integrative analysis of the plasma metabolome coupled to traditional clinical variables may reveal a WL “responder” phenotype. Therfore, we predicted WL in overweight and obese individuals on a...

  18. Longer coronary anastomosis provides lower energy loss in coronary artery bypass grafting.

    Science.gov (United States)

    Tsukui, Hiroyuki; Shinke, Manabu; Park, Young Kwang; Yamazaki, Kenji

    2017-01-01

    Distal anastomosis technique affects graft patency and long-term outcomes in coronary artery bypass grafting, however, there is no standard for the appropriate length of distal anastomosis. The purpose of this study is to evaluate whether longer distal anastomosis provides higher quality of distal anastomosis and better hemodynamic patterns. Off pump CABG training simulator, YOUCAN (EBM Corporation, Japan), was used for distal anastomosis model. Two lengths of distal anastomosis model (10 versus 4 mm) were prepared by end-to-side anastomosis technique. After CT scan constructed three-dimensional inner shape of distal anastomosis, computational flow dynamics (CFD) was used to analyze hemodynamic patterns. The working flow was defined as Newtonian fluid with density of 1050 kg/m(3) and viscosity of 4 mPa s. The boundary condition was set to 100 mmHg at inlet, 50 ml/min at outlet, and 100 % stenosis of proximal coronary artery. Three-dimensional CT imaging showed quality of distal anastomosis in 10 mm model was more uniform without vessel wall inversion or kinking compared to 4 mm model. Anastomotic flow area was significantly larger in 10 mm model than that in 4 mm model (28.67 ± 4.91 versus 8.89 ± 3.18 mm(2), p anastomosis provided higher quality of distal anastomosis, larger anastomotic flow area, smaller anastomotic angle, and smoother graft curvatures. These factors yielded lower energy loss at distal anastomosis.

  19. Noninvasive quantification of fluid mechanical energy losses in the total cavopulmonary connection with magnetic resonance phase velocity mapping.

    Science.gov (United States)

    Venkatachari, Anand K; Halliburton, Sandra S; Setser, Randolph M; White, Richard D; Chatzimavroudis, George P

    2007-01-01

    A major determinant of the success of surgical vascular modifications, such as the total cavopulmonary connection (TCPC), is the energetic efficiency that is assessed by calculating the mechanical energy loss of blood flow through the new connection. Currently, however, to determine the energy loss, invasive pressure measurements are necessary. Therefore, this study evaluated the feasibility of the viscous dissipation (VD) method, which has the potential to provide the energy loss without the need for invasive pressure measurements. Two experimental phantoms, a U-shaped tube and a glass TCPC, were scanned in a magnetic resonance (MR) imaging scanner and the images were used to construct computational models of both geometries. MR phase velocity mapping (PVM) acquisitions of all three spatial components of the fluid velocity were made in both phantoms and the VD was calculated. VD results from MR PVM experiments were compared with VD results from computational fluid dynamics (CFD) simulations on the image-based computational models. The results showed an overall agreement between MR PVM and CFD. There was a similar ascending tendency in the VD values as the image spatial resolution increased. The most accurate computations of the energy loss were achieved for a CFD grid density that was too high for MR to achieve under current MR system capabilities (in-plane pixel size of less than 0.4 mm). Nevertheless, the agreement between the MR PVM and the CFD VD results under the same resolution settings suggests that the VD method implemented with a clinical imaging modality such as MR has good potential to quantify the energy loss in vascular geometries such as the TCPC.

  20. Quantum size effects in the volume plasmon excitation of bismuth nanoparticles investigated by electron energy loss spectroscopy

    Science.gov (United States)

    Wang, Y. W.; Kim, J. S.; Kim, G. H.; Kim, Kwang S.

    2006-04-01

    Quantum size effects in volume plasmon excitation of bismuth nanoparticles with diameters ranging from 5to500nm have been studied by electron energy loss spectroscopy. The Bi nanoparticles were prepared by reducing Bi3+ with sodium borohydride in the presence of poly(vinylpyrroldone). The volume plasmon energy and its peak width increase with decreasing nanoparticle diameter, due to the quantum size effect. For the particles with diameter less than 40nm, the increase of the volume plasmon energy is proportional to the inverse square of the nanoparticle diameter, confirming the semimetal to semiconductor transition in Bi nanoparticles.