WorldWideScience

Sample records for automotive vehicles energia

  1. Automotive vehicle sensors

    Energy Technology Data Exchange (ETDEWEB)

    Sheen, S.H.; Raptis, A.C.; Moscynski, M.J.

    1995-09-01

    This report is an introduction to the field of automotive vehicle sensors. It contains a prototype data base for companies working in automotive vehicle sensors, as well as a prototype data base for automotive vehicle sensors. A market analysis is also included.

  2. Energy and environmental costs. An approach to the case of the automotive vehicles; Energia y costos ambientales: Una aproximacion al caso de los vehiculos automotores

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Flores, Leonardo [Instituto Nacional de Ecologia (Mexico)

    1996-07-01

    The energy consumption of the Metropolitan Zone of the Valley of Mexico (ZMVM) is presented, considering the different economic sectors and the different types of fuels used by them. The form in which this demand will impact the air quality largely depends on the energy balance. Also an inventory of the emissions in 1989 is given. It is possible to emphasize that the power balance maintains a close association with the emissions inventory, which reflects the dependency of the emissions with respect to the energy use. Finally an analysis is made of the considered environmental costs for Mexico. [Spanish] Se presenta el consumo energetico de la zona metropolitana del valle de Mexico (ZMVM), considerando los distintos sectores economicos y los diferentes tipos de combustibles utilizados por ellos. La forma en que esta demanda impactara la calidad del aire depende en buena medida del balance energetico. Tambien se muestra un inventario de las emisiones en 1989. Cabe destacar que el balance energetico mantiene una asociacion estrecha con el inventario de emisiones, lo cual refleja la dependencia de las emisiones respecto al uso de energia. Finalmente se hace un analisis de los costos ambientales estimados para Mexico.

  3. Integrated Vehicle Health Management in the Automotive Industry

    OpenAIRE

    Holland, Steven

    2010-01-01

    The time has come to port integrated vehicle health management concepts originally pioneered in aerospace and other domains into the automotive industry. ï‚· The successful automotive manufacturer must remain highly customer-focused to ensure delivery of high value at an affordable price. ï‚· IVHM success will require partnering between the automotive manufacturer, its suppliers, as well as external technology providers located in private industry, academia and governmental labs ...on a globa...

  4. Acoustic response variability in automotive vehicles

    Science.gov (United States)

    Hills, E.; Mace, B. R.; Ferguson, N. S.

    2009-03-01

    A statistical analysis of a series of measurements of the audio-frequency response of a large set of automotive vehicles is presented: a small hatchback model with both a three-door (411 vehicles) and five-door (403 vehicles) derivative and a mid-sized family five-door car (316 vehicles). The sets included vehicles of various specifications, engines, gearboxes, interior trim, wheels and tyres. The tests were performed in a hemianechoic chamber with the temperature and humidity recorded. Two tests were performed on each vehicle and the interior cabin noise measured. In the first, the excitation was acoustically induced by sets of external loudspeakers. In the second test, predominantly structure-borne noise was induced by running the vehicle at a steady speed on a rough roller. For both types of excitation, it is seen that the effects of temperature are small, indicating that manufacturing variability is larger than that due to temperature for the tests conducted. It is also observed that there are no significant outlying vehicles, i.e. there are at most only a few vehicles that consistently have the lowest or highest noise levels over the whole spectrum. For the acoustically excited tests, measured 1/3-octave noise reduction levels typically have a spread of 5 dB or so and the normalised standard deviation of the linear data is typically 0.1 or higher. Regarding the statistical distribution of the linear data, a lognormal distribution is a somewhat better fit than a Gaussian distribution for lower 1/3-octave bands, while the reverse is true at higher frequencies. For the distribution of the overall linear levels, a Gaussian distribution is generally the most representative. As a simple description of the response variability, it is sufficient for this series of measurements to assume that the acoustically induced airborne cabin noise is best described by a Gaussian distribution with a normalised standard deviation between 0.09 and 0.145. There is generally

  5. 19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S... CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Automotive Products § 10.84...

  6. REUSE OF AUTOMOTIVE COMPONENTS FROM DISMANTLED END OF LIFE VEHICLES

    Directory of Open Access Journals (Sweden)

    Piotr NOWAKOWSKI

    2013-12-01

    Full Text Available The problem of recycling end of life automotive vehicles is serious worldwide. It is one of the most important streams of waste in developed countries. It has big importance as recycling potential of raw materials content in automotive vehicles is valuable. Different parts and assemblies after dismantling can also be reused in vehicles where replacement of specific component is necessary. Reuse of the components should be taken into consideration in selecting the vehicles dismantling strategy. It also complies with European Union policy concerning end of life vehicles (ELV. In the paper it is presented systematic approach to dismantling strategies including disassembly oriented on further reuse of components. It is focused on decision making and possible benefits calculation from economic and environmental point of view.

  7. Energia eòlica i vehicle elèctric: Sinergia de futur

    OpenAIRE

    Bordas Geli, Maria Neus

    2011-01-01

    Català: L’objectiu d’aquest estudi és analitzar la interacció entre la implantació del vehicle elèctric i el desenvolupament de l’energia eòlica a Catalunya en els propers anys. L’estudi consisteix en la creació d’un model que desenvolupa diferents escenaris futurs a Catalunya amb diferents implantacions del vehicle elèctric considerant sempre que l’electricitat consumida per ells prové exclusivament de l’energia eòlica. L’estudi es centra en analitzar els impactes i les conseqüèn...

  8. Vibration isolation of automotive vehicle engine using periodic mounting systems

    Science.gov (United States)

    Asiri, S.

    2005-05-01

    Customer awareness and sensitivity to noise and vibration levels have been raised through increasing television advertisement, in which the vehicle noise and vibration performance is used as the main market differentiation. This awareness has caused the transportation industry to regard noise and vibration as important criteria for improving market shares. One industry that tends to be in the forefront of the technology to reduce the levels of noise and vibration is the automobile industry. Hence, it is of practical interest to reduce the vibrations induced structural responses. The automotive vehicle engine is the main source of mechanical vibrations of automobiles. The engine is vulnerable to the dynamic action caused by engine disturbance force in various speed ranges. The vibrations of the automotive vehicle engines may cause structural failure, malfunction of other parts, or discomfort to passengers because of high level noise and vibrations. The mounts of the engines act as the transmission paths of the vibrations transmitted from the excitation sources to the body of the vehicle and passengers. Therefore, proper design and control of these mounts are essential to the attenuation of the vibration of platform structures. To improve vibration resistant capacities of engine mounting systems, vibration control techniques may be used. For instance, some passive and semi-active dissipation devices may be installed at mounts to enhance vibration energy absorbing capacity. In the proposed study, a radically different concept is presented whereby periodic mounts are considered because these mounts exhibit unique dynamic characteristics that make them act as mechanical filters for wave propagation. As a result, waves can propagate along the periodic mounts only within specific frequency bands called the "Pass Bands" and wave propagation is completely blocked within other frequency bands called the "Stop Bands". The experimental arrangements, including the design of

  9. Diffusion of new automotive technologies for improving energy efficiency in Brazil's light vehicle fleet

    International Nuclear Information System (INIS)

    Historically, Brazil has promoted the development and sales of light duty vehicles running on ethanol (firstly, ethanol-dedicated cars, and recently flexfuel cars). In the 1990s, the country also favored the sales of compact cars to middle and low-income classes. However, in the last years, the profile of vehicles sold in Brazil has converged towards larger and less-efficient vehicles. In 2008, Brazil launched the vehicle labeling program. Based on the outcomes of the historical programs oriented towards the development of automotive innovations, and on a survey conducted with the country's main auto makers, this article evaluates whether the vehicle labeling program will both improve the energy efficiency of light vehicles, and introduce new technologies. Our results indicate that, despite its virtuous intentions, the program will not control the tendency of rising fuel consumption of passenger cars sold in Brazil. Therefore, other policies are needed to boost innovations in Brazil's automotive industry.

  10. Diffusion of new automotive technologies for improving energy efficiency in Brazil's light vehicle fleet

    International Nuclear Information System (INIS)

    Historically, Brazil has promoted the development and sales of light duty vehicles running on ethanol (firstly, ethanol-dedicated cars, and recently flexfuel cars). In the 1990s, the country also favored the sales of compact cars to middle and low-income classes. However, in the last years, the profile of vehicles sold in Brazil has converged towards larger and less-efficient vehicles. In 2008, Brazil launched the vehicle labeling program. Based on the outcomes of the historical programs oriented towards the development of automotive innovations, and on a survey conducted with the country's main auto makers, this article evaluates whether the vehicle labeling program will both improve the energy efficiency of light vehicles, and introduce new technologies. Our results indicate that, despite its virtuous intentions, the program will not control the tendency of rising fuel consumption of passenger cars sold in Brazil. Therefore, other policies are needed to boost innovations in Brazil's automotive industry. (author)

  11. Automotive Vehicle Including a Security Arrangement Provided with an Inflatable Protective Bag

    OpenAIRE

    Chevroulet, Tristan; Béroud, Jean-Claude

    1996-01-01

    The invention concerns an automotive vehicle. This vehicle comprises a dashboard , steering control handles distanced from the dashboard, the dashboard comprising a compartment closed by a flap and in which is arranged a protective bag of supple material at least partially gas-tight, the bag being coupled to a gas source and one or more accelerometers for automatically releasing the gas source in response to abnormal behaviour of the vehicle, in that the bag spreads out, in the inflated state...

  12. Using a central Vehicle Holding Compound (VHC) in an open pipeline automotive order fulfilment system: a simulation study

    OpenAIRE

    MacCarthy, Bart L.; Ovutmen, Tamer

    2015-01-01

    Satisfying requests for specific vehicle variants in a timely manner may increase profit margins for the automotive producer and automotive dealers and may reduce the need to incentivise customers financially to make a purchase. Open pipeline order fulfilment systems have emerged in the automotive sector to allow dealers to fulfil a customer in a number of ways. Not only can a dealer search its own stock for a suitable match to a customer’s requested vehicle specification, the dealer can al...

  13. New Lightweight Structures for Advanced Automotive Vehicles - Safe and Modular

    OpenAIRE

    Kobilke, Alexander; Kopp, Gundolf; Schöll, Roland; Straßburger, Philipp; Kriescher, Michael

    2012-01-01

    The next generations of vehicle designs should be developed aiming for individual mobility whilst also retaining safety, environmental friendliness, and affordability. An essential step for increasing the body's performance in terms of safety and weight is the combination of high-performance materials such as new steel grades or high-performance fibre composite materials with a vehicle architecture optimised for these materials. The basis of the work is the unique synthesis of research fields...

  14. Advanced microsystems for automotive applications 2013 smart systems for safe and green vehicles

    CERN Document Server

    Meyer, Gereon

    2013-01-01

    The road vehicle of the future will embrace innovations from three major automotive technology fields: driver assistance systems, vehicle networking and alternative propulsion. Smart systems such as adaptive ICT components and MEMS devices, novel network architectures, integrated sensor systems, intelligent interfaces and functional materials form the basis of these features and permit their successful and synergetic integration. They increasingly appear to be the key enabling technologies for safe and green road mobility. For more than fifteen years the International Forum on Advanced Microsystems for Automotive Applications (AMAA) has been successful in detecting novel trends and in discussing the technological implications from early on. The topic of the AMAA 2013 will be “Smart Systems for Safe and Green Vehicles”. This book contains peer-reviewed papers written by leading engineers and researchers which all address the ongoing research and novel developments in the field. www.amaa.de.

  15. Design and development of a continuously variable ratio transmission for automotive vehicles. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-09-30

    Work accomplished between July 1974 and October 1978 in a program directed toward the design and development of a continuously variable ratio transmission (CVT) for an automotive vehicle is reported. The following major accomplishments were achieved: the laboratory and mathematical projections establishing the viability of the program and the predicted attainment of the primary goal of fuel economy were verified; the proposed Concept Demonstration prototype hydromechanical transmission (HMT) was completed from design to operation; the HMT was thoroughly tested in the laboratory and on the road and its in-vehicle performance was verified by independent testing laboratories; and design of a second generation Pre-Production HMT has proceeded to the point of confirming the practicality of the automotive HMT size and weight; most of the necessary information has been generated which could permit its production cost/competitiveness to be evaluated. (LCL)

  16. The influence of tyre contact patch and on the stopping distance of automotive vehicles

    OpenAIRE

    Selig, Michael; Ball, Andrew; Ash, J.; Schmidt, K.

    2012-01-01

    This contribution presents the experimental tests results about the influence of the tyre contact patch on the stopping distance of automotive vehicles. The objective of the performed tests is the evaluation of the effect of tyre inflation pressure, hence the resulting tyre contact patch on the braking system and the brake distance. The conditions of the experiment are a dry and level road surface without steering inputs. To record scientific results, a brake robot system is used. The benefit...

  17. Aerodynamic Study about an Automotive Vehicle with Capacity for Only One Occupan

    Directory of Open Access Journals (Sweden)

    Almeida R.A

    2016-04-01

    Full Text Available The presented study describes the aerodynamic behavior of a compact, single occupant, automotive vehicle. To optimize the aerodynamic characteristics of this vehicle, a flow dynamics study was conducted using a virtual model. The outer surfaces of the vehicle body were designed using Computer Aided Design (CAD tools and its aerodynamic performance simulated virtually using Computational Fluid Dynamics (CFD software. Parameters such as pressure coefficient (Cp, coefficient of friction (Cf and graphical analysis of the streamlines were used to understand the flow dynamics and propose recommendations aimed at improving the coefficient of drag (Cd. The identification of interaction points between the fluid and the flow structure was the primary focus of study to develop these propositions. The study of phenomena linked to the characteristics of the model presented here, allowed the identification of design features that should be avoided to generate improved aerodynamic performance

  18. Sustainable design for automotive products: dismantling and recycling of end-of-life vehicles.

    Science.gov (United States)

    Tian, Jin; Chen, Ming

    2014-02-01

    The growth in automotive production has increased the number of end-of-life vehicles (ELVs) annually. The traditional approach ELV processing involves dismantling, shredding, and landfill disposal. The "3R" (i.e., reduce, reuse, and recycle) principle has been increasingly employed in processing ELVs, particularly ELV parts, to promote sustainable development. The first step in processing ELVs is dismantling. However, certain parts of the vehicle are difficult to disassemble and use in practice. The extended producer responsibility policy requires carmakers to contribute in the processing of scrap cars either for their own developmental needs or for social responsibility. The design for dismantling approach can be an effective solution to the existing difficulties in dismantling ELVs. This approach can also provide guidelines in the design of automotive products. This paper illustrates the difficulty of handling polymers in dashboards. The physical properties of polymers prevent easy separation and recycling by using mechanical methods. Thus, dealers have to rely on chemical methods such as pyrolysis. Therefore, car designers should use a single material to benefit dealers. The use of materials for effective end-of-life processing without sacrificing the original performance requirements of the vehicle should be explored. PMID:24326159

  19. A preliminary study on the changes in the italian automotive supply chain for the introduction of electric vehicles

    OpenAIRE

    Rossini, Matteo; Ciarapica, Filippo Emanuele; Matt, Dominik Tobias; Russo Spena, Pasquale

    2016-01-01

    Purpose: A survey has been carried out among Italian car makers, suppliers, and customers to identify the potential changes that the traditional Italian automotive supply chain would need for the introduction of electric vehicles. In addition, this study investigates the degree of importance that enterprises attribute to the electric vehicle market and their perceptions about the development of this market, also evaluating which types of electric vehicles and body styles are re...

  20. A preliminary study on the changes in the Italian automotive supply chain for the introduction of electric vehicles

    OpenAIRE

    Matteo Rossini; Filippo Ciarapica; Dominik Matt; Pasquale Russo Spena

    2016-01-01

    Purpose: A survey has been carried out among Italian car makers, suppliers, and customers to identify the potential changes that the traditional Italian automotive supply chain would need for the introduction of electric vehicles. In addition, this study investigates the degree of importance that enterprises attribute to the electric vehicle market and their perceptions about the development of this market, also evaluating which types of electric vehicles and body styles are receiving the mos...

  1. A simulation study of a speed control system for autonomous on-road operation of automotive vehicles

    OpenAIRE

    Dolezal, Michael J.

    1987-01-01

    Approved for public release; distribution is unlimited The study of human driving of automotive vehicles is an important aid to the development of viable autonomous vehicle navigation and control techniques. Observation of human behavior during driving suggests that this activity involves two distinct levels, the conscious and the unconscious. The behavior of a driver while stopping his vehicle at a stop sign can be conscious or unconscious, depending on the driver's skill level and the ...

  2. Acoustic–Structural Study for the Cabin of an Automotive Vehicle

    Directory of Open Access Journals (Sweden)

    E.J. González–Galván

    2010-01-01

    Full Text Available An acoustic–structural study of a cabin for an automotive vehicle through a new 3D finite element model is presented. This model, which is developed with software ANSYS, has a simple geometrical configuration to provide the uncoupled and coupled acoustic–structural modes of the cabin with computing minimum time. In addition, the model easily obtains the results of interior sound pressure and stress in the cabin caused by a harmonic excitation. The results of the first coupled–system modes are of rigid type and they have frequencies smaller than 5 Hz. However, the main acoustic modes are present for frequencies greater than 87 Hz, with the exception of Helmholtz mode (0 Hz. The highest acoustic pressure (in the range from 2 to 400 Hz is 107.8 dB for a harmonic excitation of 1 N. The structure of the cabin registers a maximum stress of 1.85 MPa to 51 Hz. The model proposed significantly contributes in the evaluation of noise level and stress for an automotive vehicle.

  3. All auto shredding: evaluation of automotive shredder residue generated by shredding only vehicles.

    Energy Technology Data Exchange (ETDEWEB)

    Duranceau, C. M.; Spangenberger, J. S. (Energy Systems); (Vehicle Recycling Partnership, LLC); (American Chemistry Counsel, Plastics Division)

    2011-09-26

    A well developed infrastructure exists for the reuse and recycling of automotive parts and materials. At the end of a vehicle's useful life many parts are removed and sold for reuse and fluids are recovered for recycling or proper disposal. What remains is shredded, along with other metal bearing scrap such as home appliances, demolition debris and process equipment, and the metals are separated out and recycled. The remainder of the vehicle materials is call shredder residue which ends up in the landfill. As energy and natural resources becomes more treasured, increased effort has been afforded to find ways to reduce energy consumption and minimize the use of our limited resources. Many of the materials found in shredder residue could be recovered and help offset the use of energy and material consumption. For example, the energy content of the plastics and rubbers currently landfilled with the shredder residue is equivalent to 16 million barrels of oil per year. However, in the United States, the recovered materials, primarily polymers, cannot be recycled due to current regulatory barriers which preclude the re-introduction into commerce of certain materials because of residual contamination with substances of concern (SOCs) such as polychlorinated biphenyls (PCBs). The source of the PCBs is not well understood. Old transformers, capacitors, white goods and ballasts from lighting fixtures are likely contributing factors. The project was designed to evaluate whether vehicles of varying age and manufacturing origin contribute to the PCB content in shredder residue. Additionally, the project was designed to determine if there are any trends in material composition of the shredder residue from varied age and manufacturing groups. This information would aid in future material recovery facility strategy and design. The test utilized a newly installed shredder plant to shred four categories of automobiles. The categories were defined by vehicle age and the

  4. 76 FR 14070 - In the Matter of Certain Automotive Vehicles and Designs Therefore; Notice of Commission Issuance...

    Science.gov (United States)

    2011-03-15

    ...'') of Auburn Hills, Michigan. 75 FR 34483-84 (June 17, 2010). The complaint alleges violations of... with respect to respondents found in default. 75 FR 75184-85 (Dec. 2, 2010). Chrysler and the... COMMISSION In the Matter of Certain Automotive Vehicles and Designs Therefore; Notice of Commission...

  5. Closing the Loop with Sensors in Commercial Building Systems: Applying Lessons from Automotive Vehicles

    Science.gov (United States)

    Mantese, Joseph

    2011-08-01

    Automotive systems have evolved extensively over the past 50 years, providing a fully integrated system of sub-systems that work in concert for optimal vehicle level closed loop control. In this talk we look at several automotive sub-systems: stability and control, safety and security, emissions and comfort, diagnostics and maintenance, infotainment and communications; with an eye toward understanding their technology drivers and associated value propositions. Conversely, we examine how commercial building systems currently are represented as a collection of sub-systems that often work independently of each other for local optimization, often relying upon open loop control systems developed and installed decades ago. Reasoning primarily by analogy we explore opportunities for energy and efficiency, comfort and environment, and safety/security; asking whether there is sufficient value associated with a new class of building sensors and how those technologies might be brought to bear in improving performance. Finally, we examine the fundamental architecture of detection systems built upon sensing elements, with the aim of understanding trade-offs between: detection, false alarm rate, power, and cost.

  6. Closing the Loop with Sensors in Commercial Building Systems: Applying Lessons from Automotive Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Mantese, Joseph [United Technologies Corporation' s Research Center (United States)

    2011-08-17

    Automotive systems have evolved extensively over the past 50 years, providing a fully integrated system of sub-systems that work in concert for optimal vehicle level closed loop control. In this talk we look at several automotive sub-systems: stability and control, safety and security, emissions and comfort, diagnostics and maintenance, infotainment and communications; with an eye toward understanding their technology drivers and associated value propositions. Conversely, we examine how commercial building systems currently are represented as a collection of sub-systems that often work independently of each other for local optimization, often relying upon open loop control systems developed and installed decades ago. Reasoning primarily by analogy we explore opportunities for energy and efficiency, comfort and environment, and safety/security; asking whether there is sufficient value associated with a new class of building sensors and how those technologies might be brought to bear in improving performance. Finally, we examine the fundamental architecture of detection systems built upon sensing elements, with the aim of understanding trade-offs between: detection, false alarm rate, power, and cost.

  7. Closing the Loop with Sensors in Commercial Building Systems: Applying Lessons from Automotive Vehicles

    International Nuclear Information System (INIS)

    Automotive systems have evolved extensively over the past 50 years, providing a fully integrated system of sub-systems that work in concert for optimal vehicle level closed loop control. In this talk we look at several automotive sub-systems: stability and control, safety and security, emissions and comfort, diagnostics and maintenance, infotainment and communications; with an eye toward understanding their technology drivers and associated value propositions. Conversely, we examine how commercial building systems currently are represented as a collection of sub-systems that often work independently of each other for local optimization, often relying upon open loop control systems developed and installed decades ago. Reasoning primarily by analogy we explore opportunities for energy and efficiency, comfort and environment, and safety/security; asking whether there is sufficient value associated with a new class of building sensors and how those technologies might be brought to bear in improving performance. Finally, we examine the fundamental architecture of detection systems built upon sensing elements, with the aim of understanding trade-offs between: detection, false alarm rate, power, and cost.

  8. The influence of tyre contact patch and on the stopping distance of automotive vehicles

    Science.gov (United States)

    Selig, M.; Ball, A.; Ash, J.; Schmidt, K.

    2012-05-01

    This contribution presents the experimental tests results about the influence of the tyre contact patch on the stopping distance of automotive vehicles. The objective of the performed tests is the evaluation of the effect of tyre inflation pressure, hence the resulting tyre contact patch on the braking system and the brake distance. The conditions of the experiment are a dry and level road surface without steering inputs. To record scientific results, a brake robot system is used. The benefit of a robotic system is the elimination of the interfering variable driver, who is not able to apply the brake system at the same time with the same force. State-of-the-art data acquisition tools are used to log the data.

  9. The influence of tyre contact patch and on the stopping distance of automotive vehicles

    International Nuclear Information System (INIS)

    This contribution presents the experimental tests results about the influence of the tyre contact patch on the stopping distance of automotive vehicles. The objective of the performed tests is the evaluation of the effect of tyre inflation pressure, hence the resulting tyre contact patch on the braking system and the brake distance. The conditions of the experiment are a dry and level road surface without steering inputs. To record scientific results, a brake robot system is used. The benefit of a robotic system is the elimination of the interfering variable driver, who is not able to apply the brake system at the same time with the same force. State-of-the-art data acquisition tools are used to log the data.

  10. Review on Automotive Power Generation System on Plug-in Hybrid Electric Vehicles & Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Leong Yap Wee

    2016-01-01

    Full Text Available Regenerative braking is a function to recharge power bank on the Plug-in electric vehicles (PHEV and electric vehicles (EV. The weakness of this system is, it can only perform its function when the vehicle is slowing down or by stepping the brake foot pedal. In other words, the electricity recharging system is inconsistent, non-continuous and geography dependent. To overcome the weakness of the regenerative braking system, it is suggested that to apply another generator which is going to be parallel with the regenerative braking system so that continuous charging can be achieved. Since the ironless electricity generator has a less counter electromotive force (CEMF comparing to an ironcored electricity generator and no cogging torque. Applying the ironless electricity generator parallel to the regenerative braking system is seen one of the options which creates sustainable charging system compared to cored electricity generator.

  11. A Study of the Awareness Level of Electric Vehicle Technology in California Community College Automotive Curriculums.

    Science.gov (United States)

    Keyzer, James

    California automotive technician programs were surveyed regarding their awareness of the impact that mandates of the Clean Air Act would have on their automotive technology programs. A questionnaire was sent to 100 California community colleges with an automotive technology program; 49 usable questionnaires were returned. A possible byproduct of…

  12. A preliminary study on the changes in the Italian automotive supply chain for the introduction of electric vehicles

    Directory of Open Access Journals (Sweden)

    Matteo Rossini

    2016-05-01

    Full Text Available Purpose: A survey has been carried out among Italian car makers, suppliers, and customers to identify the potential changes that the traditional Italian automotive supply chain would need for the introduction of electric vehicles. In addition, this study investigates the degree of importance that enterprises attribute to the electric vehicle market and their perceptions about the development of this market, also evaluating which types of electric vehicles and body styles are receiving the most relevant investment. Design/methodology/approach: An empirical investigation has been carried out to examine the above-mentioned aspects. Data have been collected through an on-line survey and analysed by a descriptive statistical analysis, confirmatory factors analysis, and cluster analyses. Findings: Market penetration of electric vehicles is mainly influenced by technological choices of car makers and battery manufacturers and by the ability to organize and manage the integrated actions of stakeholders, also including component suppliers, and manufacturers of vehicle management systems. Stakeholders have to exploit economies of scale, to make use and expand long-time competencies in electric engineering with automotive know-how, and to build up cooperation with experts in the new value chain to facilitate the required transfer of know-how. Alliances and joint ventures can provide manufacturers access to the know-how, technology, and production capacity of battery suppliers. Outsourcing, especially as regards research and development, will occur even more frequently in the near future. An agile supply chain should be adopted to manage a fluctuating market demand. Originality/value: This preliminary study contributes to provide an outlook of some of the most important changes that traditional Italian automotive supply chain would need to promote the introduction of electric vehicles and their critical components with an emphasis on production aspects.

  13. Reliable and repeatable bonding technology for high temperature automotive power modules for electrified vehicles

    International Nuclear Information System (INIS)

    This paper presents the feasibility of highly reliable and repeatable copper–tin transient liquid phase (Cu–Sn TLP) bonding as applied to die attachment in high temperature operational power modules. Electrified vehicles are attracting particular interest as eco-friendly vehicles, but their power modules are challenged because of increasing power densities which lead to high temperatures. Such high temperature operation addresses the importance of advanced bonding technology that is highly reliable (for high temperature operation) and repeatable (for fabrication of advanced structures). Cu–Sn TLP bonding is employed herein because of its high remelting temperature and desirable thermal and electrical conductivities. The bonding starts with a stack of Cu–Sn–Cu metal layers that eventually transforms to Cu–Sn alloys. As the alloys have melting temperatures (Cu3Sn: > 600 °C, Cu6Sn5: > 400 °C) significantly higher than the process temperature, the process can be repeated without damaging previously bonded layers. A Cu–Sn TLP bonding process was developed using thin Sn metal sheets inserted between copper layers on silicon die and direct bonded copper substrates, emulating the process used to construct automotive power modules. Bond quality is characterized using (1) proof-of-concept fabrication, (2) material identification using scanning electron microscopy and energy-dispersive x-ray spectroscopy analysis, and (3) optical analysis using optical microscopy and scanning acoustic microscope. The feasibility of multiple-sided Cu–Sn TLP bonding is demonstrated by the absence of bondline damage in multiple test samples fabricated with double- or four-sided bonding using the TLP bonding process. (paper)

  14. Reliable and repeatable bonding technology for high temperature automotive power modules for electrified vehicles

    Science.gov (United States)

    Yoon, Sang Won; Glover, Michael D.; Mantooth, H. Alan; Shiozaki, Koji

    2013-01-01

    This paper presents the feasibility of highly reliable and repeatable copper-tin transient liquid phase (Cu-Sn TLP) bonding as applied to die attachment in high temperature operational power modules. Electrified vehicles are attracting particular interest as eco-friendly vehicles, but their power modules are challenged because of increasing power densities which lead to high temperatures. Such high temperature operation addresses the importance of advanced bonding technology that is highly reliable (for high temperature operation) and repeatable (for fabrication of advanced structures). Cu-Sn TLP bonding is employed herein because of its high remelting temperature and desirable thermal and electrical conductivities. The bonding starts with a stack of Cu-Sn-Cu metal layers that eventually transforms to Cu-Sn alloys. As the alloys have melting temperatures (Cu3Sn: > 600 °C, Cu6Sn5: > 400 °C) significantly higher than the process temperature, the process can be repeated without damaging previously bonded layers. A Cu-Sn TLP bonding process was developed using thin Sn metal sheets inserted between copper layers on silicon die and direct bonded copper substrates, emulating the process used to construct automotive power modules. Bond quality is characterized using (1) proof-of-concept fabrication, (2) material identification using scanning electron microscopy and energy-dispersive x-ray spectroscopy analysis, and (3) optical analysis using optical microscopy and scanning acoustic microscope. The feasibility of multiple-sided Cu-Sn TLP bonding is demonstrated by the absence of bondline damage in multiple test samples fabricated with double- or four-sided bonding using the TLP bonding process.

  15. Wind Energy and Transport Synergy: Electric Vehicle or Hydrogen Vehicle?; Sinergia Energia Eolica Transporte: vehiculo electrico o vehiculo de hidrogeno?

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, I.

    2009-07-01

    This article briefly analyzes the potential uses of hydrogen as a form of energy from wind power. It also briefly describes the different experiences gained in wind energy-based hydrogen production by water hydrolysis, and finally it concludes with a brief analysis of the competition between hydrogen and the new ion-lithium batteries used in motor vehicles as potential solutions to support wind energy management. (Author)

  16. A simulation study of an autonomous steering system for on-road operation of automotive vehicles / Robert B. McGhee, Michael J. Zyda, Chiam Huat Tan

    OpenAIRE

    McGhee, Robert B.; Zyda, Michael J.; Tan, Chiam Huat.

    1986-01-01

    The study of human driving of automotive vehicles is an important aid to the development of viable autonomous vehicle navigation techniques. Observation of human behavior during driving suggests that this activity involves two distinct levels, the conscious and the unconscious. Conscious actions relate to the logical behavior of a driver such as stopping the vehicle when a traffic light is red, slowing down the vehicle when it turns a bend, etc. Such behavior can be described using natural hu...

  17. Management status of end-of-life vehicles and development strategies of used automotive electronic control components recycling industry in China.

    Science.gov (United States)

    Wang, Junjun; Chen, Ming

    2012-11-01

    Recycling companies play a leading role in the system of end-of-life vehicles (ELVs) in China. Automotive manufacturers in China are rarely involved in recycling ELVs, and they seldom provide dismantling information for recycling companies. In addition, no professional shredding plant is available. The used automotive electronic control components recycling industry in China has yet to take shape because of the lack of supporting technology and profitable models. Given the rapid growth of the vehicle population and electronic control units in automotives in China, the used automotive electronic control components recycling industry requires immediate development. This paper analyses the current recycling system of ELVs in China and introduces the automotive product recycling technology roadmap as well as the recycling industry development goals. The strengths, weaknesses, opportunities and challenges of the current used automotive electronic control components recycling industry in China are analysed comprehensively based on the 'strengths, weaknesses, opportunities and threats' (SWOT) method. The results of the analysis indicate that this recycling industry responds well to all the factors and has good opportunities for development. Based on the analysis, new development strategies for the used automotive electronic control components recycling industry in accordance with the actual conditions of China are presented. PMID:22843351

  18. Modifications for use of methanol or methanol-gasoline blends in automotive vehicles, September 1976-January 1980

    Energy Technology Data Exchange (ETDEWEB)

    Patterson, D.J.; Bolt, J.A.; Cole, D.E.

    1980-01-01

    Methanol or blends of methanol and gasoline as automotive fuels may be attractive means for extending the nation's petroleum reserves. The present study was aimed at identifying potential problems and solutions for this use of methanol. Retrofitting of existing vehicles as well as future vehicle design have been considered. The use of ethanol or higher alcohols was not addressed in this study but will be included at a later date. Several potentially serious problems have been identified with methanol use. The most attractive solutions depend upon an integrated combination of vehicle modifications and fuel design. No vehicle problems were found which could not be solved with relatively minor developments of existing technology providing the methanol or blend fuel was itself engineered to ameliorate the solution. Research needs have been identified in the areas of lubrication and materials. These, while apparently solvable, must precede use of methanol or methanol-gasoline blends as motor fuels. Because of the substantial costs and complexities of a retrofitting program, use of methanol must be evaluated in relation to other petroleum-saving alternatives. Future vehicles can be designed initially to operate satisfactorily on these alternate fuels. However a specific fuel composition must be specified around which the future engines and vehicles can be designed.

  19. Automotive factory network renewal

    OpenAIRE

    Scicluna, Christopher

    2012-01-01

    The aim of this applied thesis was to plan, implement, and study the upgrading the network infrastructure in Valmet Automotive Oy, specifically in its Uusikaupunki factory. Valmet Automotive is a Finnish automotive service provider, focusing on premium vehicles, convertible roof systems and electric vehicles. The objective was to plan and implement a networking infrastructure that could support the load of a factory in full-scale production, while ensuring near-constant availability. T...

  20. Automotive security functions: the use of new technologies to tackle vehicle-related crime

    NARCIS (Netherlands)

    Knapik, Peter

    2016-01-01

    New technologies are mainly used in academia and industry to advance applications in three categories within the automotive field. The first category involves applications to improve traffic efficiency. The second set of applications aims to provide the driver and passengers with infotainment featur

  1. The Role of Public and Private Protection in Disruptive Innovation: The Automotive Industry and the Emergence of Low-Emission Vehicles

    NARCIS (Netherlands)

    J. Pinkse; R. Bohnsack; A. Kolk

    2014-01-01

    In the automotive industry, the need to move toward more sustainable trajectories of innovation has received much attention. Car manufacturers have started to develop lower emission alternatives for the internal combustion engine, particularly electric, hybrid, and fuel-cell vehicles. They face the

  2. Assessment of methane-related fuels for automotive fleet vehicles: technical, supply, and economic assessments

    Energy Technology Data Exchange (ETDEWEB)

    1982-02-01

    The use of methane-related fuels, derived from a variety of sources, in highway vehicles is assessed. Methane, as used here, includes natural gas (NG) as well as synthetic natural gas (SNG). Methanol is included because it can be produced from NG or the same resources as SNG, and because it is a liquid fuel at normal ambient conditions. Technological, operational, efficiency, petroleum displacement, supply, safety, and economic issues are analyzed. In principle, both NG and methanol allow more efficient engine operation than gasoline. In practice, engines are at present rarely optimized for NG and methanol. On the basis of energy expended from resource extraction to end use, only optimized LNG vehicles are more efficient than their gasoline counterparts. By 1985, up to 16% of total petroleum-based highway vehicle fuel could be displaced by large fleets with central NG fueling depots. Excluding diesel vehicles, which need technology advances to use NG, savings of 8% are projected. Methanol use by large fleets could displace up to 8% of petroleum-based highway vehicle fuel from spark-ignition vehicles and another 9% from diesel vehicles with technology advances. The US NG supply appears adequate to accommodate fleet use. Supply projections, future price differential versus gasoline, and user economics are uncertain. In many cases, attractive paybacks can occur. Compressed NG now costs on average about $0.65 less than gasoline, per energy-equivalent gallon. Methanol supply projections, future prices, and user economics are even more uncertain. Current and projected near-term methanol supplies are far from adequate to support fleet use. Methanol presently costs more than gasoline on an equal-energy basis, but is projected to cost less if produced from coal instead of NG or petroleum.

  3. Design and Analysis of A Suspension Coil Spring For Automotive Vehicle

    Directory of Open Access Journals (Sweden)

    N.Lavanya

    2014-09-01

    Full Text Available The suspension system is used to observe the vibrations from shock loads due to irregularities of the road surface. It is perform its function without impairing the stability, steering (or general handling of the vehicle. Generally for light vehicles, coil springs are used as suspension system. A spring is an elastic object used to store mechanical energy and it can be twist, pulled (or stretched by some force and can return to their original shape when the force is released. The present work attempts to analyze the safe load of the light vehicle suspension spring with different materials. This investigation includes comparison of modeling and analyses of primary suspension spring made of low carbon-structural steel and chrome vanadium steel and suggested the suitability for optimum design. The results show the reduction in overall stress and deflection of spring for chosen materials.

  4. Feasibility test on compounding the internal combustion engine for automotive vehicles, Task II. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    The organic Rankine bottoming cycle can be considered for various automobile and truck applications. The most attractive use, however, is in large, heavy-duty diesel trucks for long distance hauling. Here, the engine load and speed requirements are nearly constant over a large portion of the operating hours, and high mileages are accumulated. Thus, the potential fuel savings are sufficient to justify the added cost of a bottoming cycle system. A conceptual design study of compounding the diesel truck engine with an ORCS was made and the results of the study are presented. Based on the results of the conceptual design study which showed a 15 percent fuel economy improvement potential over the duty cycle, an early feasibility demonstration test of the system was initiated. The demonstration system uses a Mack ENDT 676 diesel engine with existing but nonoptimum ORCS hardware made available from an earlier automotive Rankine-cycle program. The results of these feasibility demonstration tests, both steady-state and transient, over the operating range of the diesel engine, are presented.

  5. Design method of automotive powertrain mounting system based on vibration and noise limitations of vehicle level

    Science.gov (United States)

    Shangguan, Wen-Bin; Liu, Xiao-Ang; Lv, Zhao-Ping; Rakheja, Subhash

    2016-08-01

    The design logic and calculation method for determining mount stiffness and damping for a Powertrain Mounting System (PMS) based on reductions of vehicle vibration and noise contributed by mounts is proposed in this paper. Firstly, the design target for a PMS with regard to vibration and noise limitations of vehicle level contributed form mounts is described. Then a vehicle model with 13 Degree of Freedoms (DOFs) is proposed, which includes 6DOFs for the powertrain, 3 DOFs for the car body and 4DOFs for the four unsprung mass, and the dynamic equation for the model is derived. Some widely used models, such as the 6 DOFs model of the powertrain for the design calculation of a PMS, the 7 DOFs model (Body's 3 DOFs; unsprung mass's 4 DOFs) and the 9 DOFs model (powertrain's 6 DOFs; Body's 3 DOFs) for ride analysis of a vehicle, are the specific cases of the presented model of 13 DOF. Thirdly, the calculation method for obtaining the vibration of seat track and evaluation point and the noise at driver right ear is presented based on the mount forces and the vibration and noise transfer functions. An optimization process is proposed to get the mount stiffness and damping based on minimization of vehicle vibration and noise, and the optimized stiffness is validated by comparing the calculated vibration and noise and limitations. In the end of this paper, the natural frequencies and mode energies for the powertrain, the body and the unsprung mass are calculated using different models and the results are compared and analyzed.

  6. Automotive electronics design fundamentals

    CERN Document Server

    Zaman, Najamuz

    2015-01-01

    This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs.  A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.

  7. A review of composite material applications in the automotive industry for the electric and hybrid vehicle

    Science.gov (United States)

    Bauer, J. L.

    1979-01-01

    A review is made of the state-of-the-art in regard to the use of composite materials for reducing the structural mass of automobiles. Reduction of mass provides, in addition to other engineering improvements, increased performance/range advantages that are particularly needed in the electric and hybrid vehicle field. Problems encountered include the attainment of mass production techniques and the prevention of environmental hazards.

  8. Reliability in automotive ethernet networks

    DEFF Research Database (Denmark)

    Soares, Fabio L.; Campelo, Divanilson R.; Yan, Ying;

    2015-01-01

    This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular.......This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular....

  9. Thermoelectric Generators for the Integration into Automotive Exhaust Systems for Passenger Cars and Commercial Vehicles

    Science.gov (United States)

    Frobenius, Fabian; Gaiser, Gerd; Rusche, Ulrich; Weller, Bernd

    2016-03-01

    A special thermoelectric generator system design and the setup of a thermoelectric generator for the integration into the exhaust line of combustion engine-driven vehicles are described. A prototype setup for passenger cars and the effects on the measured power output are shown. Measurement results using this setup show the potential and the limitations of a setup based on thermoelectric modules commercially available today. In a second step, a short outline of the detailed mathematical modeling of the thermoelectric generator and simulation studies based on this model are presented. By this means, it can be shown by which measures an improvement of the system power output can be achieved—even if today's modules are used. Furthermore, simulation studies show how the exhaust gas conditions of diesel- and Otto-engines significantly affect the requirements on thermoelectric materials as well as the potential and the design of the thermoelectric generator. In a further step, the design and the setup of a thermoelectric generator for an application in a commercial vehicle are presented. This thermoelectric generator is designed to be integrated into the exhaust aftertreatment box of the vehicle. Experimental results with this setup are performed and presented. The results show that thermoelectric generators can become an interesting technology for exhaust waste heat recovery due to the fact that they comprise non-moving parts. However, the efficiency of the modules commercially available today is still far from what is required. Hence, modules made of new materials known from laboratory samples are urgently required. With regard to future CO2 regulations, a large market opportunity for modules with a high efficiency can be expected.

  10. Automotive sensors

    Science.gov (United States)

    Marek, Jiri; Illing, Matthias

    2003-01-01

    Sensors are an essential component of most electronic systems in the car. They deliver input parameters for comfort features, engine and emission control as well as for the active and passive safety systems. New technologies such as silicon micromachining play an important role for the introduction of these sensors in all vehicle classes. The importance and use of these sensor technologies in today"s automotive applications will be shown in this article. Finally an outlook on important current developments and new functions in the car will be given.

  11. FISITA 2012 World Automotive Congress

    CERN Document Server

    2013-01-01

    Proceedings of the FISITA 2012 World Automotive Congress are selected from nearly 2,000 papers submitted to the 34th FISITA World Automotive Congress, which is held by Society of Automotive Engineers of China (SAE-China ) and the International Federation of Automotive Engineering Societies (FISITA). This proceedings focus on solutions for sustainable mobility in all areas of passenger car, truck and bus transportation. Volume 8: Vehicle Design and Testing (II) focuses on: •Automotive Reliability Technology •Lightweight Design Technology •Design for Recycling •Dynamic Modeling •Simulation and Experimental Validation •Virtual Design, Testing and Validation •Testing of Components, Systems and Full Vehicle Above all researchers, professional engineers and graduates in fields of automotive engineering, mechanical engineering and electronic engineering will benefit from this book.   SAE-China is a national academic organization composed of enterprises and professionals who focus on research, design a...

  12. Identification for automotive systems

    CERN Document Server

    Hjalmarsson, Håkan; Re, Luigi

    2012-01-01

    Increasing complexity and performance and reliability expectations make modeling of automotive system both more difficult and more urgent. Automotive control has slowly evolved from an add-on to classical engine and vehicle design to a key technology to enforce consumption, pollution and safety limits. Modeling, however, is still mainly based on classical methods, even though much progress has been done in the identification community to speed it up and improve it. This book, the product of a workshop of representatives of different communities, offers an insight on how to close the gap and exploit this progress for the next generations of vehicles.

  13. Automotive NVH technology

    CERN Document Server

    Nijman, Eugenius; Priebsch, Hans-Herwig

    2016-01-01

    This book presents seven chapters examining selected noise, vibration and harshness (NVH) topics that are highly relevant for automotive vehicle development. These include applications following the major trends toward increased passenger comfort, vehicle electrification and lightweight design. The authors of the seven chapters, all of which are experts from the automotive industry and academia, present the foremost challenges and potential solutions in this demanding field. Among others, applications for sound optimization in downsized engines, noise optimization in electric powertrains, weight reduction options for exhaust systems, porous materials description, and the vibro-acoustic analysis of geared systems are discussed.

  14. Estudo da competitividade dos principais autoveículos compactos brasileiros A study on the competitiveness of the most important compact automotive vehicles manufactured in Brazil

    Directory of Open Access Journals (Sweden)

    Juan Hidalgo Sanchez

    2012-01-01

    Full Text Available Este artigo relata a metodologia e os resultados da pesquisa empírica qualitativa realizada para identificar os fatores determinantes da competitividade dos principais autoveículos compactos brasileiros produzidos pela Fiat, Ford, General Motors e Volkswagen. Optou-se pela utilização da metodologia prescrita pelo modelo de campos e armas da competição, visto que é qualitativa e quantitativa e consegue representar com bastante clareza as estratégias competitivas de negócios e as operacionais da empresa. Os resultados obtidos confirmaram as hipóteses, validadas segundo o método popperiano dedutivo de prova: 1 não há diferença estatisticamente significativa entre os campos da competição escolhidos para os autoveículos mais competitivos e os escolhidos para os menos competitivos, pois todos eles competem basicamente em projeto, qualidade e preço do produto; e 2 o foco (variável matemática que mede o alinhamento das armas da competição aos campos da competição escolhidos para cada veículo explica por que um autoveículo é mais competitivo que outro.This article describes the methodology and the results of a study carried out to identify the determinants of competitiveness of the most important compact automotive vehicles produced by the four major car manufacturers operating in Brazil: Fiat, Ford, General Motors and Volkswagen. The methodology chosen was the one suggested by the Fields and Weapons of the Competition model, because it is both qualitative and quantitative, and because it provides a very clear representation of the competitive business and operational strategies of companies. The results validated the hypotheses formulated, and it is possible to conclude that: 1 there is no statistically significant difference between the fields of competition chosen for the more competitive automotive vehicles and the ones chosen for the less competitive, since they all compete primarily on design, quality and price of product

  15. 77 FR 19000 - Foreign-Trade Zone 99-Wilmington, DE: Application for Manufacturing Authority; Fisker Automotive...

    Science.gov (United States)

    2012-03-29

    ...; Fisker Automotive, Inc. (Electric Passenger Vehicles): Wilmington, DE An application has been submitted... FTZ 99, requesting manufacturing authority on behalf of Fisker Automotive, Inc. (Fisker),...

  16. MEMS for automotive and aerospace applications

    CERN Document Server

    Kraft, Michael

    2013-01-01

    MEMS for automotive and aerospace applications reviews the use of Micro-Electro-Mechanical-Systems (MEMS) in developing solutions to the unique challenges presented by the automotive and aerospace industries.Part one explores MEMS for a variety of automotive applications. The role of MEMS in passenger safety and comfort, sensors for automotive vehicle stability control applications and automotive tire pressure monitoring systems are considered, along with pressure and flow sensors for engine management, and RF MEMS for automotive radar sensors. Part two then goes on to explore MEMS for

  17. Automotive mechatronics automotive networking, driving stability systems, electronics

    CERN Document Server

    2015-01-01

    As the complexity of automotive vehicles increases this book presents operational and practical issues of automotive mechatronics. It is a comprehensive introduction to controlled automotive systems and provides detailed information of sensors for travel, angle, engine speed, vehicle speed, acceleration, pressure, temperature, flow, gas concentration etc. The measurement principles of the different sensor groups are explained and examples to show the measurement principles applied in different types. Contents Basics of mechatronics.- Architecture.- Electronic control unit.- Software development.- Basic principles of networking.- Automotive networking.- Bus systems.- Automotive sensors.- Sensor measuring principles.- Sensor types.- Electric actuators.- Electrohydraulic actuators.- Electronic transmission control.- Electronic transmission control unit.- Modules for transmission control.- Antilock braking system.- Traction control system.- Electronic stability program.- Automatic brake functions.- Hydraulic modu...

  18. Robotic transport complex of automotive vehicles for handling of rock mass at the process of open cast mining

    Directory of Open Access Journals (Sweden)

    Anatoly KOLGA

    2015-06-01

    Full Text Available The article is concerned with the applicability of the robotic transportation complex of automotive barrows for haulage transportation along various transport routes of mining enterprises. The simultaneous application of robotic transport and telemetry links makes the door-to-door transportation possible, i.e. direct transportation from the starting to the final point avoiding intermediate storage and a considerable part of auxiliary equipment.

  19. Use of microPCM fluids as enhanced liquid coolants in automotive EV and HEV vehicles. Final report; FINAL

    International Nuclear Information System (INIS)

    Proof-of-concept experiments using a specific microPCM fluid that potentially can have an impact on the thermal management of automotive EV and HEV systems have been conducted. Samples of nominally 20-micron diameter microencapsulated octacosane and glycol/water coolant were prepared for testing. The melting/freezing characteristics of the fluid, as well as the viscosity, were determined. A bench scale pumped-loop thermal system was used to determine heat transfer coefficients and wall temperatures in the source heat exchanged. Comparisons were made which illustrate the enhancements of thermal performance, reductions of pumping power, and increases of heat transfer which occur with the microPCM fluid

  20. A synthesis procedure for pass-by noise of automotive vehicles employing numerically evaluated source-receiver transfer functions

    Science.gov (United States)

    Huijssen, Jacobus; Hallez, Raphael; Pluymers, Bert; Desmet, Wim

    2013-07-01

    A synthesis procedure is presented for the prediction of the sound pressure level (SPL) of passenger vehicles in a pass-by noise test. The proposed synthesis procedure translates the noise from the sources in the moving vehicle to the receivers in two steps. Firstly, the steady-state receiver contributions of the sources are computed as they would arise from a number of static vehicle positions along the drive path. Secondly, these contributions are then combined into a single transient signal from a moving vehicle for each source-receiver pair by means of a travel time correction. The multiple source-receiver transfer functions are numerically evaluated by employing the Fast Multipole Boundary Element Method (FMBEM), which allows for pass-by noise SPL estimation on the basis of the CAD/CAE computer models that are available early in the design stage. Results are presented that show the accuracy of the synthesis procedure and that show the ability of the combination of the synthesis procedure and numerically evaluated transfer functions to predict pass-by noise SPL for a realistic case in an evaluation time of less than a day.

  1. Hydrogen as automotive fuel

    International Nuclear Information System (INIS)

    An assessment of the technical/economic feasibility of the use of hydrogen as an automotive fuel is made based on analyses of the following: the chemical- physical properties of hydrogen in relation to its use in internal combustion engines; the modifications necessary to adapt internal combustion engines to hydrogen use; hydrogen fuel injection systems - with water vapour injection, cryogenic injection, and the low or high pressure injection of hydrogen directly into the combustion chamber; the current commercialization status of hydrogen automotive fuels; energy efficiency ratings; environmental impacts; in-vehicle storage systems - involving the use of hydrides, high pressure systems and liquid hydrogen storage systems; performance in terms of pay-load ratio; autonomous operation; and operating costs. The paper concludes that, considering current costs for hydrogen fuel production, distribution and use, at present, the employment of hydrogen fuelled vehicles is feasible only in highly polluted urban environments where the innovative vehicle's air pollution abatement characteristics would justify its high operating costs as compared with those of conventional automotive alternatives

  2. Simulation based design of automotive systems

    OpenAIRE

    Schiehlen, Werner

    1993-01-01

    The design of automotive systems using simulation tools features cost reduction and quality enhancement. This paper presents two basic approaches. The rust approach deals with the application of CAD data bases to the evaluation of input data for multibody system formalisms, most adequate for automotive system modeling. An object oriented data model for multibody systems is presented. The second approach covers the development of an integrated simulation tool for automotive vehicles and the co...

  3. Review of composite material applications in the automotive industry for the electric and hybrid vehicle. Annual report, November 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, J.L.

    1979-07-01

    A comprehensive review is made of the state-of-the-art in regard to the use of composite materials for reducing the structural mass of automobiles. Reduction of mass will provide, in addition to other engineering improvements, increased performance/range advantages that are particularly needed in the electric and hybrid vehicle field. Problems to be overcome include the attainment of mass production techniques and the prevention of environmental hazards.

  4. Automotive systems engineering

    CERN Document Server

    Winner, Hermann

    2013-01-01

    This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as  “automotive systems engineering”.  These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

  5. The automotive transmission book

    CERN Document Server

    Fischer, Robert; Jürgens, Gunter; Najork, Rolf; Pollak, Burkhard

    2015-01-01

    This book presents essential information on systems and interactions in automotive transmission technology and outlines the methodologies used to analyze and develop transmission concepts and designs. Functions of and interactions between components and subassemblies of transmissions are introduced, providing a basis for designing transmission systems and for determining their potentials and properties in vehicle-specific applications: passenger cars, trucks, buses, tractors, and motorcycles. With these fundamentals the presentation provides universal resources for both state-of-the-art and future transmission technologies, including systems for electric and hybrid electric vehicles.

  6. A comprehensive framework for automotive sustainability assessment

    OpenAIRE

    Jasinski, D.; Meredith, J.; Kirwan, K.

    2016-01-01

    Business efficiency, stakeholder pressure and the need for legislative compliance compel the automotive sector to design and manufacture fuel-efficient, low-impact, environmentally responsible and sustainable vehicles. Managing and responding to these multiple and sometimes conflicting interests requires the measurement of economic, environmental and societal performance. Although a number of automotive sustainability measures are mentioned within the literature, there is no singl...

  7. Exhaust gas emissions from various automotive fuels for light-duty vehicles. Effects on health, environment and energy utilization

    International Nuclear Information System (INIS)

    The main aim of the investigation has been to assess the effects on health and environment from various alternative fuels for light-duty vehicles. Effects that can be identified and quantified, such as acidification, ozone formation, cancer risk and climate change, have been of primary interest but other effects, such as respiratory diseases, have also been investigated. Data have been collected through literature surveys for subsequent calculation of the mentioned effects in different time-frames. Corrections have been used to take into consideration the influence of climate, ageing and driving pattern. Emissions generated in fuel production have also been accounted for. The most significant and important differences between the fuels have been found for effects as ozone formation cancer risk and particulate emissions. Alternative fuels, such as methanol and methane (natural gas and biogas), significantly decrease the ozone formation in comparison to petrol, while ethanol, methanol and methane are advantageous concerning cancer risk. The particulate emissions are considerably higher for diesel engines fuelled by diesel oil and RME in comparison to the other fuels. In the future, the importance of acid emissions in the fuel production will increase since the NOx and SOx emissions will decrease from the vehicles. The emissions of climate gases could be significantly reduced by using non-fossil fuels but the efficiency of the drive train is also of importance. The technical development potential for further emission reductions is considerable for all fuels but the advantage for the best fuel options will remain in the future

  8. Use of compressed natural gas in automotive vehicles; Uso del gas natural comprimido aplicado en vehiculos automotores

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez R, Adrian [Comision Nacional para el Ahorro de Energia (CONAE) (Mexico)

    2005-07-01

    The natural gas is natural origin energy (fossil fuel); it contains predominantly 90 percent methane; does not require transformation process for its use; is supplied the 24 hours to commerce, industries and homes by underground pipes; it is lighter than air; it is not corrosive, nor absorbent or toxic. For those reasons a study was performed where it is widely justified why the natural gas ought to be used in vehicles. [Spanish] El gas natural es un energetico de origen natural (combustible fosil), contiene predominantemente 90 por ciento de metano, no requiere proceso de transformacion para su utilizacion, llega directamente las 24 horas del dia a los hogares, comercios e industrias por tuberias subterraneas, es mas ligero que el aire, no es corrosivo, no es absorbente y no es toxico. Por esas razones se hizo un estudio donde se justifica ampliamente porque el gas natural debe utilizarse en vehiculos.

  9. Architecting and Modeling Automotive Embedded Systems

    OpenAIRE

    Larses, Ola

    2005-01-01

    Dealing properly with electronics and software will be a strong competitive advantage in the automotive sector in the near future. Electronics are driving current innovations and are at the same time becoming a larger part of the cost of the vehicle. In order to be successful as an automotive manufacturer, innovations must be introduced in the vehicle without compromising the final price tag. Also, the electronics has to compete with, and win over, the dependability of well known and proven m...

  10. Tank-automotive robotics

    Science.gov (United States)

    Lane, Gerald R.

    1999-07-01

    To provide an overview of Tank-Automotive Robotics. The briefing will contain program overviews & inter-relationships and technology challenges of TARDEC managed unmanned and robotic ground vehicle programs. Specific emphasis will focus on technology developments/approaches to achieve semi- autonomous operation and inherent chassis mobility features. Programs to be discussed include: DemoIII Experimental Unmanned Vehicle (XUV), Tactical Mobile Robotics (TMR), Intelligent Mobility, Commanders Driver Testbed, Collision Avoidance, International Ground Robotics Competition (ICGRC). Specifically, the paper will discuss unique exterior/outdoor challenges facing the IGRC competing teams and the synergy created between the IGRC and ongoing DoD semi-autonomous Unmanned Ground Vehicle and DoT Intelligent Transportation System programs. Sensor and chassis approaches to meet the IGRC challenges and obstacles will be shown and discussed. Shortfalls in performance to meet the IGRC challenges will be identified.

  11. Mis on Roheline Energia? / Kadi Laid

    Index Scriptorium Estoniae

    Laid, Kadi, 1976-

    2004-01-01

    Tuule- ja vee-energia kasutamisest Rohelise Energia osalussüsteemiga liitunud kuues Hiiumaa ettevõttes ning Kärdla linnavalitsuses. Kommenteerivad Toomas Jõõts, Ari Hannula ja Ants Vahtras. Lisa: Rohelise energia ostjad Hiiumaal praegu

  12. Antenna Arrays and Automotive Applications

    CERN Document Server

    Rabinovich, Victor

    2013-01-01

    This book throws a lifeline to designers wading through mounds of antenna array patents looking for the most suitable systems for their projects. Drastically reducing the research time required to locate solutions to the latest challenges in automotive communications, it sorts and systematizes material on cutting-edge antenna arrays that feature multi-element communication systems with enormous potential for the automotive industry. These new systems promise to make driving safer and more efficient, opening up myriad applications, including vehicle-to-vehicle traffic that prevents collisions, automatic toll collection, vehicle location and fine-tuning for cruise control systems. This book’s exhaustive coverage begins with currently deployed systems, frequency ranges and key parameters. It proceeds to examine system geometry, analog and digital beam steering technology (including "smart" beams formed in noisy environments), maximizing signal-to-noise ratios, miniaturization, and base station technology that ...

  13. Quartz angular rate sensor for automotive navigation

    Energy Technology Data Exchange (ETDEWEB)

    Nozoe, Toshiyuki; Ichinose, Toshihiko; Kawasaki, Syusaku; Hatanaka, Masakazu; Kuroda, Keisuke [Matsushita Electronic Components Co. Ltd. (Japan); Yamamoto, Kohji; Ogata, Motoki; Takeno, Shoichi [Fukui Matsushita Electric Co. Ltd. (Japan); Ishihara, Minoru; Ishii, Tadashi; Umeki, Mitoshi [Nihonn Denpa Kogyo Co. Ltd. (Japan)

    1999-07-01

    Many of the recent automotive navigation systems are introducing an angular rate sensor that detect vehicle yaw in their system due to the advantage of higher accuracy, in addition to a conventional GPS (Global Positioning System) and vehicle speed signals. Though there are a couple of other methods to get a vehicle direction information, the angular rate sensor is the most suitable device as a gyro in accuracy and reliability point of view. Matsushita developed a new compact angular rate sensor using quartz crystal for automotive navigation systems. The sensor's operation is based upon Coriolis force imposed on a vibrating quartz tuning fork. (orig.)

  14. Eesti Energia unustas Toomas Lumani andmed / Raimo Poom

    Index Scriptorium Estoniae

    Poom, Raimo

    2008-01-01

    Eesti Energia jurist Heili Raudkivi palus rahandusministeeriumilt infot, mis tähtajaks on rahandusminister nimetanud Eesti Energia nõukogu liikmeks Toomas Lumani. Eesti Energia pressiesindaja selgitus

  15. Final report: U.S. competitive position in automotive technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albert, Michael B.; Cheney, Margaret; Thomas, Patrick; Kroll, Peter

    2002-09-30

    Patent data are presented and analyzed to assess the U.S. competitive position in eleven advanced automotive technology categories, including automotive fuel cells, hydrogen storage, advanced batteries, hybrid electric vehicles and others. Inventive activity in most of the technologies is found to be growing at a rapid pace, particularly in advanced batteries, automotive fuel cells and ultracapacitors. The U.S. is the clear leader in automotive fuel cells, on-board hydrogen storage and light weight materials. Japan leads in advanced batteries, hybrid electric vehicles, ultracapacitors, and appears to be close to overtaking the U.S. in other areas of power electronics.

  16. Sound field control in the automotive environment

    OpenAIRE

    Cheer, Jordan; Elliott, Stephen; Jung, Woomin

    2015-01-01

    Active control of engine and road noise in the automotive environment has been investigated within the automotive industry for around 20 years. This interest is due to both the potential to reduce vehicle noise, and the ability to remove passive noise control treatments and, therefore, improve fuel efficiency. The most successful commercial systems have generally used the loudspeakers of the car audio system to globally control engine or road noise at low frequencies. It is also possible to u...

  17. Automotive stamped part fatigue design

    OpenAIRE

    Caudoux Mélanie; Facchinetti Matteo Luca; Raynal Renaud

    2014-01-01

    Fatigue design of automotive axle parts is of prior concern because of these are high safety parts and they are expected to drive the overall vehicle mass reduction. In this framework, the stamping process is widely used to form axle parts, before assembling them by welding. Consequently, the mechanical and physical characteristics of the blank sheet are modified, having a strong influence on the fatigue behavior. In this paper, we address the consequences of the stamped process on the fatigu...

  18. Eesti Energia esindused = Eesti Energia branches / Andres Labi, Janno Roos

    Index Scriptorium Estoniae

    Labi, Andres, 1977-

    2013-01-01

    Eesti Energia klienditeeninduse kontorite sisekujundusest. Autorid: Janno Roos, Andres Labi ja Liisa Põime (Ruumilabor). Visuaalne identiteet: Tank.Teenuste disain: Urmas Pastarus. ESLi aastapreemiate žürii esimehe Kaido Kivi ning žürii liikme Raivo Puusepa arvamused

  19. The determinants of location choices of automotive producers in Turkey

    OpenAIRE

    Erdogan, Ersin

    2011-01-01

    Turkish automotive industry achieved a remarkable growth in the last two decades. This growth has been led by three closely located northwest cities of the country; namely Bursa, Kocaeli and Sakarya. The first purpose of this study is signposting the geographical concentration of automotive industry in Turkey. The second goal of the study is to find out the determinants of the location-choices of automotive producers in Turkey by using export of motor vehicles and related industry products fi...

  20. Advances in automotive control 2001

    Energy Technology Data Exchange (ETDEWEB)

    Kiencke, U.; Gissinger, G.L. (eds.)

    2001-07-01

    The aim of the 3rd IFAC Workshop 'Advances in Automotive Control', held in Karlsruhe, Germany on 28-30 March 2001, was to discuss the latest advances in relation to motor vehicles. The increase in road traffic in the 20th century was a major problem, and one of the challenges of the 21st century will be to improve driving safety and comfort. The proceedings covers: driveline control; driveline modelling; vehicle dynamics; electronic architecture; intelligent components; engine control; diagnostics; subsystems; engine modelling; and modelling of combustion and turbo-charging. 28 of the papers are abstracted here.

  1. Computational intelligence in automotive applications

    Energy Technology Data Exchange (ETDEWEB)

    Prokhorov, Danil (ed.) [Toyota Motor Engineering and Manufacturing (TEMA), Ann Arbor, MI (United States). Toyota Technical Center

    2008-07-01

    What is computational intelligence (CI)? Traditionally, CI is understood as a collection of methods from the fields of neural networks (NN), fuzzy logic and evolutionary computation. This edited volume is the first of its kind, suitable to automotive researchers, engineers and students. It provides a representative sample of contemporary CI activities in the area of automotive technology. The volume consists of 13 chapters, including but not limited to these topics: vehicle diagnostics and vehicle system safety, control of vehicular systems, quality control of automotive processes, driver state estimation, safety of pedestrians, intelligent vehicles. All chapters contain overviews of state of the art, and several chapters illustrate their methodologies on examples of real-world systems. About the Editor: Danil Prokhorov began his technical career in St. Petersburg, Russia, after graduating with Honors from Saint Petersburg State University of Aerospace Instrumentation in 1992 (MS in Robotics). He worked as a research engineer in St. Petersburg Institute for Informatics and Automation, one of the institutes of the Russian Academy of Sciences. He came to the US in late 1993 for Ph.D. studies. He became involved in automotive research in 1995 when he was a Summer intern at Ford Scientific Research Lab in Dearborn, MI. Upon his graduation from the EE Department of Texas Tech University, Lubbock, in 1997, he joined Ford to pursue application-driven research on neural networks and other machine learning algorithms. While at Ford, he took part in several production-bound projects including neural network based engine misfire detection. Since 2005 he is with Toyota Technical Center, Ann Arbor, MI, overseeing important mid- and long-term research projects in computational intelligence. (orig.)

  2. Nonlinear estimation and control of automotive drivetrains

    CERN Document Server

    Chen, Hong

    2014-01-01

    Nonlinear Estimation and Control of Automotive Drivetrains discusses the control problems involved in automotive drivetrains, particularly in hydraulic Automatic Transmission (AT), Dual Clutch Transmission (DCT) and Automated Manual Transmission (AMT). Challenging estimation and control problems, such as driveline torque estimation and gear shift control, are addressed by applying the latest nonlinear control theories, including constructive nonlinear control (Backstepping, Input-to-State Stable) and Model Predictive Control (MPC). The estimation and control performance is improved while the calibration effort is reduced significantly. The book presents many detailed examples of design processes and thus enables the readers to understand how to successfully combine purely theoretical methodologies with actual applications in vehicles. The book is intended for researchers, PhD students, control engineers and automotive engineers. Hong Chen is a professor at the State Key Laboratory of Automotive Simulation and...

  3. Fatal exit the automotive black box debate

    CERN Document Server

    Kowalick, Tom

    2005-01-01

    "Fatal Exit: The Automotive Black Box Debate cuts through thirty years of political wrangling and institutional biases to provide an argument for the Motor Vehicle Event Data Recorder (MVEDR). This automotive equivalent of an airplane's flight recorder or black box is intended to solve the mysteries of car crashes and improve the safety of our roads. The reader is taken inside the automotive industry and the government highway safety establishment to foster an understanding of the politics and the positions on all sides of this safety debate. The author takes an unbiased approach, chronologically presenting each argument and uncovering the agendas and mandates of each of the stakeholders." "This publication is essential reading for all consumers who need to have their voices heard on this critical issue, as well as for attorneys, public safety advocates, public policy administrators, engineers, automotive professionals, journalists, and insurance executives."--Jacket.

  4. Automotive Battery Modelling and Management

    Directory of Open Access Journals (Sweden)

    N. M. Hammad

    2014-06-01

    Full Text Available The estimation of vehicle battery performance is typically addressed by testing the battery under specific operation conditions by using a model to represent the test results. Approaches for representing test results range from simple statistical models to neural networks to complex, physics-based models. Basing the model on test data could be problematical when testing becomes impractical with many years life time tests. So, real time estimation of battery performance, an important problem in automotive applications, falls into this area. In vehicles it is important to know the state of charge of the batteries in order to prevent vehicle stranding and to ensure that the full range of the vehicle operation is exploited. In this paper, several battery models have studied including analytical, electrical circuits, stochastic and electro- chemical models. Valve Regulated Lead Acid “VRLA” battery has been modelled using electric circuit technique. This model is considered in the proposed Battery Monitoring System “BMS”. The proposed BMS includes data acquisition, data analysis and prediction of battery performance under a hypothetical future loads. Based on these criteria, a microprocessor based BMS prototype had been built and tested in automotive Lab,. The tests show promising results that can be used in industrial applications

  5. Automotive electronics

    Energy Technology Data Exchange (ETDEWEB)

    Basshuysen, R. van [ed.; Baun, R. [comp.

    2000-10-01

    Electronic equipment is indispensable in modern motor cars for active and passive safety, exhaust and consumption monitoring or comfort. Electric and electronic systems today account for nearly 20 percent of the production cost of a normal passenger car, with an upward trend. Infotainment equipment is a growing market, which gets center stage in this issue. Further subjects discussed are current electronic and mechatronic applications as well as new developments in data transmission, development tools and constructional elements. [German] Ohne Elektronik sind moderne Automobile nicht mehr vorstellbar. Ob aktive oder passive Sicherheit, Abgas, Verbrauch oder Komfort - der Fortschritt im Autombil ist eng verknuepft mit der Einfuehrung neuer elektronischer Systeme und Komponenten. Obwohl meist nicht sehr auffaellig in einer Black-box verpackt, liegen die anteiligen Herstellungskosten fuer die Elektrik und Elektronik bei einem Mittelklassefahrzeug schon bei knapp 20 Prozent. Tendenz: Weiter steigend. Waehrend die Segnungen von ABS, ESP oder Motormanagement fuer den Kunden unsichtbar bleiben, tritt die Elektronik mit den Infotainment-Systemen ins Rampenlicht. Hochwertige Audio-Anlagen im Doppel-DIN-Format und grosse Farbbildschirme sitzen an prominenter Stelle im Armaturenbrett. Elektronische Systeme werden damit fuer den Kunden sichtbar, greifbar und erlebbar. Doch je mehr Funktionen integriert werden, desto wichtiger wird eine einfache Bedienung, die den Fahrer moeglichst wenig vom Verkehrsgeschehen ablenkt. Das ist leider keine Selbstverstaendlichkeit: Eine klare, einfache Bedienung wurde in der Vergangenheit schon bei so manchem simplen Cassetten-Radio schmerzlich vermisst. Infotainment im Automobil ist ein Wachstumsmarkt - und das Schwerpunkt-Thema der vorliegenden zweiten Ausgabe von 'Automotive Electronics'. Darueber hinaus beschaeftigt sich auch diese Ausgabe mit aktuellen Elektronik- und Mechatronik-Anwendungen und berichtet ueber neue Entwicklungen

  6. Automotive Aluminium Recycling

    Energy Technology Data Exchange (ETDEWEB)

    Gelas, B. des

    2000-07-01

    This paper aims at providing an overview on the contribution of aluminium recycling in the supply of new aluminium for automotive applications. Based on a presentation on how the global European automotive aluminium supply requirements are met, an analysis of the present and future contribution of automotive aluminium recycling is first presented. Current situation and future developments for automotive aluminium recycling practices are then commented, together with an outline on design principles for easier aluminium recycling. (orig.)

  7. Applying the Principles of Project Management to a Collegiate Automotive Engineering Design Project

    OpenAIRE

    Dvorkin, William Nathan

    2016-01-01

    The Hybrid Electric Vehicle Team of Virginia Tech is a collegiate automotive engineering design team that reengineers production vehicles to reduce environmental impact while maintaining vehicle marketability. The team Project Manager is responsible for coordinating high-level management and planning activities with the goal of better aligning the team with business and automotive industry practices. Project management responsibilities within the Hybrid Electric Vehicle Team are divided into ...

  8. Eesti Energia kokkuhoiupoliitika / Kaarel Aluoja

    Index Scriptorium Estoniae

    Aluoja, Kaarel

    2002-01-01

    Eesti Energia Rapla-Järva piirkonnas töötanud Tiit Trampas toimetas firmast kõrvale üle 4 mln krooni. Kohtuasja lihtmenetluse käigus sõlmiti kokkulepe, et Trampas maksab endisele tööandjale iga kuu vähemalt 1000 krooni

  9. Lahtimuukimata tume energia / Dennis Overbye

    Index Scriptorium Estoniae

    Overbye, Dennis

    2008-01-01

    Salapärase tumeda energia avastamisest on möödas kümme aastat, ent teadmatus, millega on tegu ja kuidas seda üldse teada võiks saada, ajab teadlased endiselt meeleheitele. Lisaks joonis: Laiali kihutavad galaktikad

  10. Techno-economic requirements for automotive composites

    Science.gov (United States)

    Arnold, Scot

    1993-01-01

    New technology generally serves two main goals of the automotive industry: one is to enable vehicles to comply with various governmental regulations and the other is to provide a competitive edge in the market. The latter goal can either be served through improved manufacturing and design capabilities, such as computer aided design and computer aided manufacturing, or through improved product performance, such as anti-lock braking (ABS). Although safety features are sometimes customer driven, such as the increasing use of airbags and ABS, most are determined by regulations as outlined by the Federal Motor Vehicle Safety Standards (FMVSS). Other standards, set by the Environmental Protection Agency, determine acceptable levels of emissions and fuel consumption. State governments, such as in California, are also setting precedent standards, such as requiring manufacturers to offer zero-emission vehicles as a certain fraction of their sales in the state. The drive to apply new materials in the automobile stems from the need to reduce weight and improve fuel efficiency. Topics discussed include: new lightweight materials; types of automotive materials; automotive composite applications; the role for composite materials in automotive applications; advantages and disadvantages of composite materials; material substitution economics; economic perspective; production economics; and composite materials production economics.

  11. Status and Prospects of the Global Automotive Fuel Cell Industry and Plans for Deployment of Fuel Cell Vehicles and Hydrogen Refueling Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Greene, David L [ORNL; Duleep, Gopal [HD Systems

    2013-06-01

    Automobile manufacturers leading the development of mass-market fuel cell vehicles (FCVs) were interviewed in Japan, Korea, Germany and the United States. There is general agreement that the performance of FCVs with respect to durability, cold start, packaging, acceleration, refueling time and range has progressed to the point where vehicles that could be brought to market in 2015 will satisfy customer expectations. However, cost and the lack of refueling infrastructure remain significant barriers. Costs have been dramatically reduced over the past decade, yet are still about twice what appears to be needed for sustainable market success. While all four countries have plans for the early deployment of hydrogen refueling infrastructure, the roles of government, industry and the public in creating a viable hydrogen refueling infrastructure remain unresolved. The existence of an adequate refueling infrastructure and supporting government policies are likely to be the critical factors that determine when and where hydrogen FCVs are brought to market.

  12. Eesti Energia gets lower than hoped for price hike

    Index Scriptorium Estoniae

    2008-01-01

    Konkurentsiamet ja Eesti Energia leppisid kokku elektritariifi tõusu põhimõtetes. Elektri hinna tõus on kolm korda väiksem kui Eesti Energia lootis. Eesti Energia on huvitatud tuumaelektrijaamast

  13. Eesti Energia tahab elektrit toota Pihkvas / Toivo Tänavsuu

    Index Scriptorium Estoniae

    Tänavsuu, Toivo

    2005-01-01

    Eesti Energia ja Venemaa ettevõte RAO Rossija võivad koos rajada Pihkvasse ühise gaasielektrijaama. Eesti Energia juhatuse liikme Lembit Vali kommentaare. Lisa: Fortum ja Eesti Energia otsivad koostöövõimalusi

  14. Bosch automotive electrics and automotive electronics. Systems and components, networking and hybrid drive. 5. ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    Complete reference guide to automotive electrics and electronics. The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the ''Automotive Electric, Automotive Electronics'' technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle.

  15. European Automotive Congress

    CERN Document Server

    Clenci, Adrian

    2016-01-01

    The volume includes selected and reviewed papers from the European Automotive Congress held in Bucharest, Romania, in November 2015. Authors are experts from research, industry and universities coming from 14 countries worldwide. The papers are covering the latest developments in fuel economy and environment, automotive safety and comfort, automotive reliability and maintenance, new materials and technologies, traffic and road transport systems, advanced engineering methods and tools, as well as advanced powertrains and hybrid and electric drives.

  16. Bosch automotive electrics and automotive electronics systems and components, networking and hybrid drive

    CERN Document Server

    2014-01-01

    The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the "Automotive Electric, Automotive Electronics" technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle. Content Electrical and electronical systems – Basic principles of networking - Examples of networked vehicles – Bus systems – Architecture of electronic systems – Mechatronics – Elektronics – Electronic control Units – Software – Sensors – Actuators – Hybrid drives – Vehicle electrical system – Start...

  17. A Secure Mechanism to Supervise Automotive Sensor Network by Client on Smart Phone

    OpenAIRE

    T R Yashavanth,; Ravi S Malashetty,; V R Udupi

    2013-01-01

    This paper presents a proposal on design of a secure client on smart phone to monitor automotive sensor network. Recently, more and more vehicles, such as BMW X5, are connected from outside via smart phone [3]. From smart phone, users can use the internet resources in automotive. Users can monitor the automotives by using their smart phones. When the automotive is moving or stolen by robber, alert information will be reported to users and users can even brake their automotive via smart phone ...

  18. Kentucky's Automotive Certification Program.

    Science.gov (United States)

    Kentucky State Dept. of Education, Frankfort. Office of Vocational Education.

    The state of Kentucky recognized a need to standardize automotive mechanics training throughout the state and to establish minimum guidelines for the quality of instruction in such programs. To meet these needs, the Office of Vocational Education selected the National Institute for Automotive Service Excellence (ASE) and began the certification…

  19. Automotive Industry in Malaysia

    DEFF Research Database (Denmark)

    Wad, Peter; Govindaraju, V.G.R. Chandran

    2011-01-01

    This paper explains the evolution and assesses the development of the Malaysian automotive industry within the premise of infant industry and trade protection framework as well as extended arguments of infant industry using a global value chain perspective. The Malaysian automotive industry...

  20. Automotive Technology Skill Standards

    Science.gov (United States)

    Garrett, Tom; Asay, Don; Evans, Richard; Barbie, Bill; Herdener, John; Teague, Todd; Allen, Scott; Benshoof, James

    2009-01-01

    The standards in this document are for Automotive Technology programs and are designed to clearly state what the student should know and be able to do upon completion of an advanced high-school automotive program. Minimally, the student will complete a three-year program to achieve all standards. Although these exit-level standards are designed…

  1. Exhaust gas emissions from various automotive fuels for light-duty vehicles. Effects on health, environment and energy utilization; Avgasemissioner fraan laetta fordon drivna med olika drivmedel

    Energy Technology Data Exchange (ETDEWEB)

    Ahlvik, P.; Brandberg, Aa. [Ecotraffic RandD AB, Stockholm (Sweden)

    1999-12-01

    The main aim of the investigation has been to assess the effects on health and environment from various alternative fuels for light-duty vehicles. Effects that can be identified and quantified, such as acidification, ozone formation, cancer risk and climate change, have been of primary interest but other effects, such as respiratory diseases, have also been investigated. Data have been collected through literature surveys for subsequent calculation of the mentioned effects in different time-frames. Corrections have been used to take into consideration the influence of climate, ageing and driving pattern. Emissions generated in fuel production have also been accounted for. The most significant and important differences between the fuels have been found for effects as ozone formation cancer risk and particulate emissions. Alternative fuels, such as methanol and methane (natural gas and biogas), significantly decrease the ozone formation in comparison to petrol, while ethanol, methanol and methane are advantageous concerning cancer risk. The particulate emissions are considerably higher for diesel engines fuelled by diesel oil and RME in comparison to the other fuels. In the future, the importance of acid emissions in the fuel production will increase since the NO{sub x} and SO{sub x} emissions will decrease from the vehicles. The emissions of climate gases could be significantly reduced by using non-fossil fuels but the efficiency of the drive train is also of importance. The technical development potential for further emission reductions is considerable for all fuels but the advantage for the best fuel options will remain in the future.

  2. Randomized CFRTP tape piece laminates in structural automotive applications

    OpenAIRE

    Darvell, Magnus

    2015-01-01

    The automotive industry is facing big challenges in meeting the future environmental demands. To be able to meet these demands reduced vehicle weight is an important part. A thorough investigation was made to better get an idea of which demands the automotive industry makes in the question of lightweight materials and how far they have come in the matter. This thesis work has been performed on behalf of Oxeon AB to investigate the future for carbon fiber thermoplastics in big scale production...

  3. Improving plastic waste management system in the automotive industry

    OpenAIRE

    Kashenko, Yuliya

    2013-01-01

    The main goals of the thesis were defined as the analysis of the environmental impact of the automotive company in the field of waste management and developing proposals for improving plastic waste management system. Current study is concentrated only on plastic waste to make the study results as concrete and achievable as possible. Today, to make lighter weight and more economical vehicles, plastics are replacing many metal components in automotive industry. In order...

  4. Mockup Didatic Set for Students Development in Automotive Electronic

    OpenAIRE

    Fabio Delatore; Felipe Serafim Albaladejo; Carlos Alberto Morioka; Alexsander Tressino de Carvalho; Fabrizio Leonardi

    2013-01-01

    The automotive engineering education area, specifically on internal combustion engine, requires the use of suitable systems, capable to simulate, test and obtain specifics data from its operation. Automotive engines are so complex due to it is a mix of engineering subjects, so, a mockup was created to help its study. The mockup is an exactly the same engine that equips a vehicle, but assembled in a mechanical base, equipped with all the necessary components for running it up. The objective of...

  5. Monitoring Automotive Particulate Matter Emissions with LiDAR: A Review

    OpenAIRE

    Claudio Mazzoleni; Hampden D. Kuhns; Hans Moosmüller

    2010-01-01

    Automotive particulate matter (PM) causes deleterious effects on health and visibility. Physical and chemical properties of PM also influence climate change. Roadside remote sensing of automotive emissions is a valuable option for assessing the contribution of individual vehicles to the total PM burden. LiDAR represents a unique approach that allows measuring PM emissions from in-use vehicles with high sensitivity. This publication reviews vehicle emission remote sensing measurements using ul...

  6. Electric Vehicle Battery Challenge

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    A serious drawback to electric vehicles [batteries only] is the idle time needed to recharge their batteries. In this challenge, students can develop ideas and concepts for battery change-out at automotive service stations. Such a capability would extend the range of electric vehicles.

  7. A Secure Mechanism to Supervise Automotive Sensor Network by Client on Smart Phone

    Directory of Open Access Journals (Sweden)

    T R Yashavanth,

    2013-04-01

    Full Text Available This paper presents a proposal on design of a secureclient on smart phone to monitor automotive sensornetwork. Recently, more and more vehicles, such asBMW X5, are connected from outside via smartphone [3]. From smart phone, users can use theinternetresources in automotive.Users can monitorthe automotives by using their smart phones. Whenthe automotive is moving or stolen byrobber, alertinformation will be reported to users and users caneven brake their automotive via smart phone inemergency status by sending control command tothe vehicle information gateway. So client softwarein smart phone is required to monitor the sensornetwork in automotives.In order to preventmalicious attack on the client software by maliciousattackers which are usually the robbers, thereshould be a mechanism provided to the clientswhich offers security by considering few criteria’slike power of computation, level of security andconsumption of power. This proposed method usesIDEA for the encryption of all the messages since

  8. The status of ceramic turbine component fabrication and quality assurance relevant to automotive turbine needs

    Energy Technology Data Exchange (ETDEWEB)

    Richerson, D.W.

    2000-02-01

    This report documents a study funded by the U.S. Department of Energy (DOE) Office of Transportation Technologies (OTT) with guidance from the Ceramics Division of the United States Automotive Materials Partnership (USAMP). DOE and the automotive companies have funded extensive development of ceramic materials for automotive gas turbine components, the most recent effort being under the Partnership for a New Generation of Vehicles (PNGV) program.

  9. Industrial Upgrading in Global Production Networks: The Case of the Chinese Automotive Industry

    OpenAIRE

    Li, Yansheng; Xin Xin KONG; Zhang, Miao

    2015-01-01

    This article examines the development of China’s automotive industry. The evidence shows that integration in global production networks has stimulated upgrading of technological capabilities among automotive firms. However, the competitiveness and intra-industry analyses show mixed results. Although intraindustry trade in automotive products has improved since 2000, the trade competitiveness of completely built up vehicles has largely remained in low value added activities. Nevertheless, firm...

  10. Automotive stamped part fatigue design

    Directory of Open Access Journals (Sweden)

    Caudoux Mélanie

    2014-06-01

    Full Text Available Fatigue design of automotive axle parts is of prior concern because of these are high safety parts and they are expected to drive the overall vehicle mass reduction. In this framework, the stamping process is widely used to form axle parts, before assembling them by welding. Consequently, the mechanical and physical characteristics of the blank sheet are modified, having a strong influence on the fatigue behavior. In this paper, we address the consequences of the stamped process on the fatigue design and how they may be effectively taken into account in the automotive industry. Actually, the coupling between the stamping process and the fatigue design is under development at PSA Peugeot Citroën Company since several years. Such an analysis deals with some major topics: thickness variation, plastic hardening and deformation, and residual stress. All of these ingredients result in fatigue criteria evolutions: it is important to stress that the stamping process can have advantageous or disadvantageous consequences on the fatigue design. This is here highlighted on some examples, dealing with front and rear axles.

  11. National Automotive Center - NAC

    Data.gov (United States)

    Federal Laboratory Consortium — Encouraged by the advantages of collaboration, the U.S. Army Tank Automotive Research, Development and Engineering Center (TARDEC) worked with the Secretary of the...

  12. Energy education; Pedagogia da energia

    Energy Technology Data Exchange (ETDEWEB)

    Muniz, Rafael Ninno, e-mail: rafaelninno@gmail.com

    2006-07-01

    'Pedagogia da Energia' (energy education) is a qualification course that has as intention to unite ambient education with renewable energies through the art-education and of the long-distance education. Collective made up of theoretical and practical activities through group dynamic and works, with intention to integrate and to enable the participants as a whole, aiming to form potentials to agreement and diffusion of energy concepts of the subjects environment - energy - residues. It possess the structure of an actual course with support of long-distance education with a platform of available web education in the Internet, where the participants have access the all content used in the course (texts, presentations and figures), virtual library, colloquy room, thematic list of quarrel and forum, beyond guardianship accompaniment. A structure constructed in classroom for the participants uses as pedagogical tool titled 'Mandala das Energias' where the concepts studied are worked in. The politics characteristics presented are, ambient and social of the use of the power plants and its implications in the daily one of the humanity. It understands the education as a reciprocal process, that understands the intention to teach and to learn in a set of exchanges of necessary information to the curious nature of the human beings. This article explains the structure and methodology of functioning of the course with a summary of the worked chapters. It also presents the pedagogical tool 'Mandala das Energias' and its respective flowchart of energies that originated it in annex at the end of the text. (author)

  13. Automotive Software & Service Engineering

    OpenAIRE

    Zauner, Andreas; Hoffmann, Holger; Leimeister, Jan Marco; Krcmar, Helmut

    2014-01-01

    Automotive Software und Services (ASS) sind zentrale Innovationstreiber in der Automobilindustrie und gewinnen zunehmend an Bedeutung. In diesem Arbeitsbericht beschreiben wir die aktuellen Herausforderungen bei der Erstellung von ASS sowie Entwicklungstrends in der Dom?ne, jeweils aus Sicht der wesentlichen Stakeholder in der Industrie auf Basis von 21 Experteninterviews. Dazu geben wir einen ?berblick ?ber bestehende Automotive Software und beschreiben unser methodisches Vorgehen bei der Da...

  14. Energia eólica

    OpenAIRE

    Carneiro, Joaquim A. O.

    2013-01-01

    O vento (massas de ar em movimento) é utilizado há milhares de anos para suprir as necessidades energéticas que decorrem de um vasto conjunto de actividades humanas. Por exemplo, o vento foi muito utilizado para propulsar alguns meios de transporte (barcos a vela), bombear água ou permitir o funcionamento de actividades industriais, como foi o caso dos moinhos de vento que ainda hoje existem em muitas regiões de Portugal. Como a maior parte das fontes de energia renováveis (excepto a ener...

  15. 4th International Conference on Sustainable Automotive Technologies

    CERN Document Server

    Wellnitz, Jörg; Leary, Martin; Koopmans, Lucien

    2012-01-01

    The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australi...

  16. Aero and vibroacoustics of automotive turbochargers

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen-Schaefer, Hung [Bosch Mahle Turbo Systems GmbH, Stuttgart (Germany)

    2013-02-01

    First book about the aeroacoustics of automotive turbochargers. Author of the book ''Rotordynamics of Automotive Turbochargers'', Springer, 2012. Written by an R and D expert in the turbocharger industry. Aero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation. In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions. Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill's analogy, is required to investigate airborne noises produced by turbochargers in passenger vehicles. The content of this book is intended for advanced undergraduates, graduates in mechanical engineering, research scientists and practicing engineers who want to better understand the interactions between these working fields and the resulting impact on the interesting topic of Aero and Vibroacoustics of Automotive Turbochargers.

  17. Environmental sustainability: plastic's evolving role in the automotive life cycle

    International Nuclear Information System (INIS)

    One method of assessing the sustainability of manufactured products involves performing a life cycle analysis for a product and comparing it to alternative ones, or else examining if individual stages of the product can be modified. LCA applications are being used more extensively, especially in the automotive and related industries. Automotive plastics in particular are being scrutinized with much greater care. Plastic components have replaced metal ones in vehicle manufacturing to improve vehicle fuel efficiency and aesthetics. However, at the end of a vehicle's life, recycling rates for plastic are negligible when compared to those of steel. In order to gain the full environmental benefits of using plastic as a vehicle material, plastics must be recycled at the end of a vehicle's life, especially given their increasing use. While a variety of processes have been developed for the recycling of automotive plastics, the challenges of sorting, processing, and finally recycling a heterogeneous mixture of used plastics have yet to be effectively solved. A preliminary life cycle assessment of a plastic automotive fascia demonstrates the usefulness of this eco-balance technique in evaluating potential improvements to manufacturing and end-of-life processes. Improving the manufacturing process may reduce environmental burdens to a larger extent than just recycling the plastic. (author)

  18. The Progressive Insurance Automotive X PRIZE Education Program

    Energy Technology Data Exchange (ETDEWEB)

    Robyn Ready

    2011-12-31

    The Progressive Insurance Automotive X PRIZE Education Program conducted education and outreach activities and used the competition's technical goals and vehicle demonstrations as a means of attracting students and the public to learn more about advanced vehicle technologies, energy efficiency, climate change, alternative fuels, and the science and math behind efficient vehicle development. The Progressive Insurance Automotive X PRIZE Education Program comprised three integrated components that were designed to educate the general public and create a multi-tiered initiative to engage students and showcase the 21st century skills students will need to compete in our global economy: teamwork, creativity, strong literacy, math and science skills, and innovative thinking. The elements included an Online Experience, a National Student Contest, and in person education events and activites. The project leveraged online connections, strategic partnerships, in-classroom, and beyond-the-classroom initiatives, as well as mainstream media. This education program supported by the U.S. Department of Energy (DOE) also funded the specification of vehicle telemetry and the full development and operation of an interactive online experience that allowed internet users to follow the Progressive Insurance Automotive X PRIZE vehicles as they performed in real-time during the Progressive Insurance Automotive X PRIZE competition events.

  19. FY2015 Vehicle Systems Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-31

    The Vehicle Systems research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to advancing light-, medium-, and heavy-duty vehicle systems to help maximize the number of electric miles driven and increase the energy efficiency of transportation vehicles.

  20. Automotive Corporate Strategy in CEE

    OpenAIRE

    Kadlecová, Petra

    2009-01-01

    The diploma thesis shows the status of the automotive industry in the Czech Republic. It shows the trends in the Czech automotive industry in short theoretical presentation. There is a trend of the future competition from developing countries, other problems are growing raw material prices or government's limits in CO2 production. The companies connected to the automotive industry are reacting. The relevant information about the status and reactions of the Czech automotive industry companies,...

  1. Fusione nucleare: l’energia delle stelle

    OpenAIRE

    Matteucci, Francesca; Sandrelli, Stefano; Gizzi, Leonida Antonio

    2014-01-01

    Intervengono Leonida Antonio Gizzi, Istituto Nazionale di Ottica del CNR, sede di Pisa, associato INFN Francesca Matteucci, docente di Astrofisica, Università di Trieste, accademico dei Lincei Modera Stefano Sandrelli, divulgatore e astrofisico, INAF-Osservatorio Astronomico di Brera E = mc2, diceva Einstein. Ovvero: la materia si può trasformare in energia e viceversa. Ma se per produrre energia bastasse solo un po’ di materia, non avremmo risolto ogni possibile crisi energe...

  2. Lightweight Steel Solutions for Automotive Industry

    Science.gov (United States)

    Lee, Hong Woo; Kim, Gyosung; Park, Sung Ho

    2010-06-01

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  3. Automotive Stirling engine: Mod 2 design report

    Science.gov (United States)

    Nightingale, Noel P.

    1986-01-01

    The design of an automotive Stirling engine that achieves the superior fuel economy potential of the Stirling cycle is described. As the culmination of a 9-yr development program, this engine, designated the Mod 2, also nullifies arguments that Stirling engines are heavy, expensive, unreliable, demonstrating poor performance. Installed in a General Motors Chevrolet Celebrity car, this engine has a predicted combined fuel economy on unleaded gasoline of 17.5 km/l (41 mpg)- a value 50% above the current vehicle fleet average. The Mod 2 Stirling engine is a four-cylinder V-drive design with a single crankshaft. The engine is also equipped with all the controls and auxiliaries necessary for automotive operation.

  4. Automotive Stirling engine: Mod II design report

    Energy Technology Data Exchange (ETDEWEB)

    Nightingale, N.P.

    1986-10-01

    The design of an automotive Stirling engine that achieves the superior fuel economy potential of the Stirling cycle is described. As the culmination of a 9-yr development program, this engine, designated the Mod II, also nullifies arguments that Stirling engines are heavy, expensive, unreliable, and demonstrate poor performance. Installed in a General Motors 1985 Chevrolet Celebrity car, this engine has a predicted combined fuel economy on unleaded gasoline of 17.5 km/L (41 mi/gal) - a value 50% above the current vehicle fleet average. The Mod II Stirling engine is a four-cylinder V-drive design with a single crankshaft. The engine is also equipped with all the controls and auxiliaries necessary for automotive operation. 35 figs.

  5. Lightweight Steel Solutions for Automotive Industry

    International Nuclear Information System (INIS)

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  6. TENDENCIES IN AUTOMOTIVE TRANSPORT DEVELOPMENT

    OpenAIRE

    U. D. Antushenay; T. R. Kisel

    2008-01-01

    The paper contains an analysis of export of transport services provided by the Republic automotive transport. Structure of expenses associated with operation of automotive transport facilities is presented in the paper. The paper cites directions pertaining to development of international automotive transportation.

  7. Automotive Stirling Engine Development Project

    Science.gov (United States)

    Ernst, William D.; Shaltens, Richard K.

    1997-01-01

    The development and verification of automotive Stirling engine (ASE) component and system technology is described as it evolved through two experimental engine designs: the Mod 1 and the Mod 2. Engine operation and performance and endurance test results for the Mod 1 are summarized. Mod 2 engine and component development progress is traced from the original design through hardware development, laboratory test, and vehicle installation. More than 21,000 hr of testing were accomplished, including 4800 hr with vehicles that were driven more dm 59,000 miles. Mod 2 engine dynamometer tests demonstrated that the engine system configuration had accomplished its performance goals for power (60 kW) and efficiency (38.5%) to within a few percent. Tests with the Mod 2 engine installed in a delivery van demonstrated combined metro-highway fuel economy improvements consistent with engine performance goals and the potential for low emission levels. A modified version of the Mod 2 has been identified as a manufacturable design for an ASE. As part of the ASE project, the Industry Test and Evaluation Program (ITEP), NASA Technology Utilization (TU) project, and the industry-funded Stirling Natural Gas Engine program were undertaken to transfer ASE technology to end users. The results of these technology transfer efforts are also summarized.

  8. GATE Center for Automotive Fuel Cell Systems at Virginia Tech

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Douglas [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-09-30

    The Virginia Tech GATE Center for Automotive Fuel Cell Systems (CAFCS) achieved the following objectives in support of the domestic automotive industry: Expanded and updated fuel cell and vehicle technologies education programs; Conducted industry directed research in three thrust areas development and characterization of materials for PEM fuel cells; performance and durability modeling for PEM fuel cells; and fuel cell systems design and optimization, including hybrid and plug-in hybrid fuel cell vehicles; Developed MS and Ph.D. engineers and scientists who are pursuing careers related to fuel cells and automotive applications; Published research results that provide industry with new knowledge which contributes to the advancement of fuel cell and vehicle systems commercialization. With support from the Dept. of Energy, the CAFCS upgraded existing graduate course offerings; introduced a hands-on laboratory component that make use of Virginia Tech's comprehensive laboratory facilities, funded 15 GATE Fellowships over a five year period; and expanded our program of industry interaction to improve student awareness of challenges and opportunities in the automotive industry. GATE Center graduate students have a state-of-the-art research experience preparing them for a career to contribute to the advancement fuel cell and vehicle technologies.

  9. Downsizing assessment of automotive Stirling engines

    Science.gov (United States)

    Knoll, R. H.; Tew, R. C., Jr.; Klann, J. L.

    1983-01-01

    A 67 kW (90 hp) Stirling engine design, sized for use in a 1984 1440 kg (3170 lb) automobile was the focal point for developing automotive Stirling engine technology. Since recent trends are towards lighter vehicles, an assessment was made of the applicability of the Stirling technology being developed for smaller, lower power engines. Using both the Philips scaling laws and a Lewis Research Center (Lewis) Stirling engine performance code, dimensional and performance characteristics were determined for a 26 kW (35 hp) and a 37 kW (50 hp) engine for use in a nominal 907 kg (2000 lb) vehicle. Key engine elements were sized and stressed and mechanical layouts were made to ensure mechanical fit and integrity of the engines. Fuel economy estimates indicated that the Stirling engine would maintain a 30 to 45 percent fuel economy advantage comparable spark ignition and diesel powered vehicles in the 1984 period.

  10. Monitoring Automotive Particulate Matter Emissions with LiDAR: A Review

    Directory of Open Access Journals (Sweden)

    Claudio Mazzoleni

    2010-04-01

    Full Text Available Automotive particulate matter (PM causes deleterious effects on health and visibility. Physical and chemical properties of PM also influence climate change. Roadside remote sensing of automotive emissions is a valuable option for assessing the contribution of individual vehicles to the total PM burden. LiDAR represents a unique approach that allows measuring PM emissions from in-use vehicles with high sensitivity. This publication reviews vehicle emission remote sensing measurements using ultraviolet LiDAR and transmissometer systems. The paper discusses the measurement theory and documents examples of how these techniques provide a unique perspective for exhaust emissions of individual and groups of vehicles.

  11. Bringing Excellence to Automotive

    Science.gov (United States)

    Večeřa, Pavel; Paulová, Iveta

    2012-12-01

    Market situation and development in recent years shows, that organization's ability to meet customer requirements is not enough. Successful organizations are able to exceed the expectations of all stakeholders. They are building their excellence systematically. Our contribution basically how the excellence in automotive is created using EFQM Excellence Model in Total Quality Management.

  12. Automotive Emission Control.

    Science.gov (United States)

    Lee, Billy D.; Ragazzi, Ronald

    This guide designed to assist teachers in improving instruction in the area of automotive emission control curriculum includes four areas. Each area consists of one or more units of instruction, with each instructional unit including some or all of the following basic components: Performance objectives, suggested activities for teacher and…

  13. Automotive Power Trains.

    Science.gov (United States)

    Marine Corps Inst., Washington, DC.

    This correspondence course, originally developed for the Marine Corps, is designed to provide mechanics with an understanding of the operation, maintenance, and troubleshooting of automotive power trains and certain auxiliary equipment. The course contains six study units covering basic power trains; clutch principles and operations; conventional…

  14. Eesti Energia hakkab Jordaanias varsti ehitama / Alyona Stadnik

    Index Scriptorium Estoniae

    Stadnik, Alyona

    2011-01-01

    Eesti Energia loodab, et Jordaania esimese põlevkivielektrijaama ehitus algab juba 2012. aastal. Majandus- ja kommunikatsiooniminister Juhan Partsi sõnul on Jordaani puhul tegemist Eesti võimalusega, Eesti Energia on Jordaania projekti kaasanud juba rahastajaid

  15. Eesti Energia, vara veel! / Väino Sarnet

    Index Scriptorium Estoniae

    Sarnet, Väino, 1952-

    2010-01-01

    Majanduskonsultant avaldab arvamust, millised on argumendid Eesti Energia kiireks börsiletulekuks, kes sellega võidaksid ja kes kaotaksid ning miks pole praegu õige aeg Eesti Energia aktsiate avalikuks müügiks

  16. Eesti Energia loovutas Estlinki energiabörsile / Kadri Bank

    Index Scriptorium Estoniae

    Bank, Kadri

    2010-01-01

    Eesti Energia otsustas rentida Estlinki merekaabli välja Soome ja Eesti põhivõrkudele, kellel on omakorda kohustus anda see üle vabaturu kasutusse. Eesti Energia finantsdirektori Margus Kaasiku kommentaar

  17. Advanced microsystems for automotive applications 2008

    Energy Technology Data Exchange (ETDEWEB)

    Valldorf, J.; Gessner, W. (eds.) [VDI/VDE Innovation und Technik GmbH, Berlin (Germany)

    2008-07-01

    With the total number of vehicles steadily increasing and soon approaching one billion, the world is facing serious challenges in terms of both safety of road transport and sustainability. Consequently the two major persistent issues for the automotive industry are improved safety and reduced emissions. The integration of complex microsystems with enhanced intelligence has enabled an increase in efficiency of the previously 'dumb' internal combustion engine by an average 1% annually during the last 20 years. In the future, such smart systems may help to leverage novel powertrain concepts towards the zero emission vehicle. Particularly for electric cars, anticipatory power management and efficient driving assistance will be needed to overcome range limitations. Electrical in-wheel motors equipped with novel miniaturized functionalities will be required. Intelligent systems for tire monitoring and control deserve special attention as well, since insufficient tire pressure accounts for more than 3% of the efficiency losses in the car. The conference book in hand is a showroom of activities, the International Forum on Advanced Microsystems for Automotive Applications (AMAA) has been known for during the last 12 years: advanced sensors including one based on the giant magneto resistance (GMR) effect, several camera and radar systems making road traffic safer by assisting the driver in recognizing pedestrians and obstacles, and human-machine interfaces based on the recognition of hand gestures - a striking example of how smart systems will further enhance the usability of vehicles and the comfort of driving. (orig.)

  18. Topology Optimization in Automotive Brake Pedal Redesign

    Directory of Open Access Journals (Sweden)

    Mohd Nizam Sudin

    2014-03-01

    Full Text Available Nowadays, automotive industry is continuing to strive for light weight vehicle in improving fuel efficiency and emissions reduction. To produce a better performance car it is important to design vehicles with optimum weight. In order to reduce the weight of vehicle without sacrificing its integrity, this project aims to employ topology optimization technique to propose an optimal design of an automotive component in early phase of product development. In this project the material used for an existing brake pedal is unchanged as this study focuses on reducing weight of existing brake pedal without material substitution. The digital model of an existing brake pedal was generated using CATIA V5 solid modelling software. Topology optimization was performed by using Altair Optistruct software under linear static stress analysis. Finally, a new light weight design brake pedal is proposed. The result of the study shows that the weight of a new designed brake pedal was 22% less as compared to an existing brake pedal without sacrificing its performance requirement.

  19. The development of natural gas as an automotive fuel in China

    International Nuclear Information System (INIS)

    This manuscript aims to systematically review the development of natural gas as an automotive fuel in China and to draw policy implications for decision making. This manuscript presents a brief overview of natural gas development and the potential of natural gas as an automotive fuel in China, followed by an introduction to the development of various technology pathways for using natural gas as an automotive fuel, including CNG (compressed natural gas) vehicles, LNG (liquefied natural gas) vehicles, and others. This material suggests, a large potential to increase the use of natural gas as an automotive fuel, especially for CNG and LNG vehicles. The following activities will promote the development of natural gas vehicles: prioritizing vehicle use in the utilization of natural gas, supporting the construction of natural gas filling stations, developing a favorable pricing policy for natural gas used in vehicles, and enhancing the research and development to further improve the technology performance, especially for the technology of LNG vehicles. -- Highlights: •An overview of the natural gas development in China. •A systematic introduction of the development of natural gas vehicles in China. •A review of the technological performance of natural gas vehicles. •Policy suggestions to promote the development of natural gas vehicles in China

  20. Going Green with Electric Vehicles

    Science.gov (United States)

    Deal, Walter F., III

    2010-01-01

    There is considerable interest in electric and hybrid cars because of environmental and climate change concerns, tougher fuel efficiency standards, and increasing dependence on imported oil. In this article, the author describes the history of electric vehicles in the automotive world and discusses the components of a hybrid electric vehicle.…

  1. 78 FR 14546 - Seagull Maritime Agencies Private Ltd. v. Gren Automotive, Inc., Centrus Automotive Distributors...

    Science.gov (United States)

    2013-03-06

    ... Seagull Maritime Agencies Private Ltd. v. Gren Automotive, Inc., Centrus Automotive Distributors Inc., and... Limited (``SMA''), hereinafter ``Complainant,'' against Gren Automotive, Inc. (``Gren''), Centrus Automotive Distributors Inc. (``Centrus'') and Mr. Liu Shao hereinafter ``Respondents.'' Complainant...

  2. 78 FR 58518 - Notification of Proposed Production Activity; Benteler Automotive Corporation (Automotive...

    Science.gov (United States)

    2013-09-24

    ... Foreign-Trade Zones Board Notification of Proposed Production Activity; Benteler Automotive Corporation (Automotive Suspension and Body Components); Duncan, South Carolina Benteler Automotive Corporation (Benteler... produce automotive suspension components and subassemblies using certain foreign-status components....

  3. Russian RSC Energia employees inspect DM in SSPF

    Science.gov (United States)

    1995-01-01

    Employees of the Russian aerospace company RSC Energia prepare to conduct final inspections of the Russian-built Docking Module in the Space Station Processing Facility at KSC. The module will fly as a primary payload on the second Space Shuttle/Mir space station docking mission, STS-74, which is now scheduled for liftoff in the fall of 1995. During the mission, the module will first be attached with the orbiter's robot arm to the Orbiter Docking System (ODS) in the payload bay of the orbiter Atlantis and then be docked with the Mir. When Atlantis undocks from the Mir, it will leave the new docking module permanently attached to the space station for use during future Shuttle Mir docking missions. The new module will simplify future Shuttle linkups with Mir by improving orbiter clearances when it serves as a bridge between the two space vehicles.

  4. Russian RSC Energia employees attach trunnions to DM

    Science.gov (United States)

    1995-01-01

    Employees of the Russian aerospace company RSC Energia attach trunnions to the Russian-built docking module in the Space Station Processing Facility at KSC so that it can be mounted in the payload bay of the Space Shuttle orbiter Atlantis. The module will fly as a primary payload on the second Space Shuttle/Mir space station docking mission, STS-74, which is now scheduled for liftoff in the fall of 1995. During the mission, the module will first be attached with the orbiter's robot arm to the Orbiter Docking System (ODS) in the payload bay of the orbiter Atlantis and then be docked with the Mir. When Atlantis undocks from the Mir, it will leave the new docking module permanently attached to the space station for use during future Shuttle Mir docking missions. The new module will simplify future Shuttle linkups with Mir by improving orbiter clearances when it serves as a bridge between the two space vehicles.

  5. DOE Automotive Composite Materials Research: Present and Future Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Warren, C.D.

    1999-08-10

    One method of increasing automotive energy efficiency is through mass reduction of structural components by the incorporation of composite materials. Significant use of glass reinforced polymers as structural components could yield a 20--30% reduction in vehicle weight while the use of carbon fiber reinforced materials could yield a 40--60% reduction in mass. Specific areas of research for lightweighting automotive components are listed, along with research needs for each of these categories: (1) low mass metals; (2) polymer composites; and (3) ceramic materials.

  6. Rotordynamics of automotive turbochargers

    CERN Document Server

    Nguyen-Schäfer, Hung

    2015-01-01

    Rotordynamics of automotive turbochargers is dealt with in this book encompassing the widely working field of small turbomachines under real operating conditions at the very high rotor speeds up to 300000 rpm. The broadly interdisciplinary field of turbocharger rotordynamics involves 1) Thermodynamics and Turbo-Matching of Turbochargers 2) Dynamics of Turbomachinery 3) Stability Analysis of Linear Rotordynamics with the Eigenvalue Theory 4) Stability Analysis of Nonlinear Rotordynamics with the Bifurcation Theory 5) Bearing Dynamics of the Oil Film using the Two-Phase Reynolds Equation 6) Computation of Nonlinear Responses of a Turbocharger Rotor 7) Aero and Vibroacoustics of Turbochargers 8) Shop and Trim Balancing at Two Planes of the Rotor 9) Tribology of the Bearing Surface Roughness 10) Design of Turbocharger Platforms using the Similarity Laws The rotor response of an automotive turbocharger at high rotor speeds is studied analytically, computationally, and experimentally. Due to the nonlinear character...

  7. TV ENERGIA Energy Efficiency Web TV

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Vasco; Alves, Luis (Research Group on Energy and Sustainable Development, Technical Univ. of Lisbon, Lisbon (Portugal)); Ferreira, Pedro (Tools to Change, Lda (Portugal))

    2009-07-01

    The number of thematic TV channels broadcasted over the Internet is a phenomenon that expands the democratisation of institutions and promotes the public participation. This is clear in the creation of the European Web TVs to inform and interact with the public, and institutions. TV ENERGIA is a Portuguese Web TV dedicated to engage the public and the businesses in energy issues, and induce social change by promoting more sustainable behaviours and the use of more energy efficient technologies. TV ENERGIA concept is different from existing Web portals and Web TV on energy and sustainability. It uses Web 2.0 capabilities, video and existing social networks as the main tool for reaching and interacting with the audience. TV ENERGIA is know looking for new partners for creating a wider internet community that uses video broadcasting and Web 2.0 capabilities to promote sustainable energy use.

  8. Global sustainability and key needs in future automotive design.

    Science.gov (United States)

    McAuley, John W

    2003-12-01

    The number of light vehicle registrations is forecast to increase worldwide by a factor of 3-5 over the next 50 years. This will dramatically increase environmental impacts worldwide of automobiles and light trucks. If light vehicles are to be environmentally sustainable globally, the automotive industry must implement fundamental changes in future automotive design. Important factors in assessing automobile design needs include fuel economy and reduced emissions. Many design parameters can impact vehicle air emissions and energy consumption including alternative fuel or engine technologies, rolling resistance, aerodynamics, drive train design, friction, and vehicle weight. Of these, vehicle weight is key and will translate into reduced energy demand across all energy distribution elements. A new class of vehicles is needed that combines ultra-light design with a likely hybrid or fuel cell engine technology. This could increase efficiency by a factor of 3-5 and reduce air emissions as well. Advanced lightweight materials, such as plastics or composites, will need to overtake the present metal-based infrastructure. Incorporating design features to facilitate end-of-life recycling and recovery is also important. The trend will be towards fewer materials and parts in vehicle design, combined with ease of disassembly. Mono-material construction can create vehicle design with improved recyclability as well as reduced numbers of parts and weight. PMID:14700327

  9. Improvements in automotive fuel economy

    Energy Technology Data Exchange (ETDEWEB)

    Borcherts, R.H.; Stadler, H.L.; Brehob, W.M.; Auiler, J.E.

    1978-01-01

    Significant improvements in automotive fuel economy can be obtained by reductions in weight, aerodynamic drag (better streamlining) and rolling resistance (tire improvements) as well as improvements in engine and powertrain efficiency. As applied to a six-passenger 3700 lb present day vehicle powered with a 250 CID six-cylinder engine through an automatic transmission, the improvements in EPA M/H fuel economy for 1% reductions in either weight, aerodynamic drag or rolling resistance are projected to be 0.75%, 0.35% and 0.28% respectively. This is under the constraints of constant performance and equal emissions. The extent to which large changes in these parameters can be obtained resulting in significant improvements in fuel economy depends not only upon solving manufacturing and technical problems related to costs but also upon government regulations and customer acceptance in the marketplace. If large reductions in these parameters could be accomplished along with realistic improvements in engine and powertrain efficiency, significant improvements in fuel economy could be achieved.

  10. Energy saving in the management of the BIMBO group distribution fleet; Ahorro de energia en la operacion de la flotilla de distribucion del grupo BIMBO

    Energy Technology Data Exchange (ETDEWEB)

    BIMBO Mexico

    2005-07-01

    In this work BIMBO demonstrates that in order to save energy it is necessary to invest in equipment, parts, research and people. This is why they got involved in the task of developing the projects of fuel cells participating with universities, associations, Secretaria de Energia, Comision Nacional de Ahorro de Energia (National Commission for Energy Saving) (CONAE) and the National Council for Science and Tecnologia (CONACYT), through financial supports with projects of mechanisms of clean development (Kyoto Protocol). For doing it they had to prove different types of fuels: biodiesel, hydrogen, alcohol and hybrids; for them to determine the most profitable and practical thus reducing the energy consumption. With the saving of fuels and lubricants in our vehicles, a greater yield in the company is obtained. [Spanish] En este trabajo BIMBO demuestra que para ahorrar energia hay que invertir en equipo, partes, investigacion y gente. Es por eso que se dieron a la tarea de desarrollar los proyectos de celdas de combustible, participando con universidades, asociaciones, la Secretaria de Energia, la Comision Nacional para el Ahorro de Energia (CONAE) y el Consejo Nacional para la Ciencia y Tecnologia (CONACYT), a traves de apoyos financieros con proyectos de mecanismos de desarrollo limpio (protocolo de Kyoto). Para ello tuvieron que probar diferentes tipos de combustibles: biodiesel, hidrogeno, alcohol e hibridos, para determinar los mas rentables y practicos y asi reducir el consumo de energia; con el ahorro de combustibles y lubricantes en nuestros vehiculos, logrando una mayor rentabilidad en la empresa.

  11. OASIS: An automotive analysis and safety engineering instrument

    International Nuclear Information System (INIS)

    In this paper, we describe a novel software tool named OASIS (AutOmotive Analysis and Safety EngIneering InStrument). OASIS supports automotive safety engineering with features allowing the creation of consistent and complete work products and to simplify and automate workflow steps from early analysis through system development to software development. More precisely, it provides support for (a) model creation and reuse, (b) analysis and documentation and (c) configuration and code generation. We present OASIS as a part of a tool chain supporting the application of a safety engineering workflow aligned with the automotive safety standard ISO 26262. In particular, we focus on OASIS' (1) support for property checking and model correction as well as its (2) support for fault tree generation and FMEA (Failure Modes and Effects Analysis) table generation. Finally, based on the case study of hybrid electric vehicle development, we demonstrate that (1) and (2) are able to strongly support FTA (Fault Tree Analysis) and FMEA

  12. Survey of CFD studies on automotive buffeting

    International Nuclear Information System (INIS)

    In the current automobile market buffeting is one of the customer frequent complaints on luxury cars and SUVs. Buffeting is a low frequency but high level wind noise and makes people inside the vehicle uncomfortable if it lasts for a long period of time. The physical mechanism of buffeting is a complicated phenomenon of aeroacoustic resonance. The aeroacoustic characteristics of buffeting depend on vehicle features and operating conditions. In this paper, a survey of CFD studies on the automotive buffeting is presented. Firstly, several buffeting related concepts, such as Helmholtz resonator, flow over a cavity, shear layer instability and vortex shedding, are reviewed and relevant references are listed. Then, a historic survey of the buffeting investigation is made with emphasis on computational studies. As an example, the buffeting studies at DaimlerChrysler are selected to demonstrate the procedure of CFD simulation for automotive buffeting. The procedure is then validated by the correlation with wind tunnel testing. After that the validated procedure is applied to find solutions for buffeting reduction. Finally, some comments on buffeting studies are addressed. (author)

  13. Requirements for future automotive batteries - a snapshot

    Science.gov (United States)

    Karden, Eckhard; Shinn, Paul; Bostock, Paul; Cunningham, James; Schoultz, Evan; Kok, Daniel

    Introduction of new fuel economy, performance, safety, and comfort features in future automobiles will bring up many new, power-hungry electrical systems. As a consequence, demands on automotive batteries will grow substantially, e.g. regarding reliability, energy throughput (shallow-cycle life), charge acceptance, and high-rate partial state-of-charge (HRPSOC) operation. As higher voltage levels are mostly not an economically feasible alternative for the short term, the existing 14 V electrical system will have to fulfil these new demands, utilizing advanced 12 V energy storage devices. The well-established lead-acid battery technology is expected to keep playing a key role in this application. Compared to traditional starting-lighting-ignition (SLI) batteries, significant technological progress has been achieved or can be expected, which improve both performance and service life. System integration of the storage device into the vehicle will become increasingly important. Battery monitoring systems (BMS) are expected to become a commodity, penetrating the automotive volume market from both highly equipped premium cars and dedicated fuel-economy vehicles (e.g. stop/start). Battery monitoring systems will allow for more aggressive battery operating strategies, at the same time improving the reliability of the power supply system. Where a single lead-acid battery cannot fulfil the increasing demands, dual-storage systems may form a cost-efficient extension. They consist either of two lead-acid batteries or of a lead-acid battery plus another storage device.

  14. DEVELOPMENT OF VEHICLES RECYCLING SYSTEM

    OpenAIRE

    PAWE£ SMOLNIK

    2014-01-01

    Fast development of automotive industry in Poland in recent years involves the need for rational waste management from the destruction and exploitation of vehicles. Rising number of new cars in Poland and existing age structure of the domestic park of vehicles will contribute to the increase number cars withdrawn from use. The way to solve the growing problem of waste recycling is the development of vehicles recycling system which contributes to the economic management of natural resources an...

  15. SITUATION IN RUSSIAN AUTOMOTIVE INDUSTRY AND AUTOMOTIVE MARKET IN CRISIS

    OpenAIRE

    Starkova, Nadezhda; Tolstova, Alisa; Ubogova, Ekaterina

    2015-01-01

    Todays situation of Russian automotive industry and automotive market has been analyzed. Main factors influencing for their position have been revealed, short-term forecast of development has been presented. Directions for stabilization of situation in production and sales of cars in Russia have been formulated.

  16. An approach for functional safety improvement of an existing automotive system

    NARCIS (Netherlands)

    Khabbaz Saberi, A.; Luo, Y.; Pawel Cichosz, F.; Brand, M. van den; Jansen, S.T.H.

    2015-01-01

    Safety of automotive systems is becoming more involved, specially for the case of autonomous vehicles. The ISO 26262 standard offers a systematic approach for designing a safe road vehicle (or subsystems of a car) from design phase through its production. However, providing functional safety (accord

  17. Framework to Analyse Automotive Interiors with a Focus on Ergonomics

    Directory of Open Access Journals (Sweden)

    Kajaria Nikhil

    2014-04-01

    Full Text Available The small car market in India is increasing by leaps and bounds. The market for small cars now occupies a substantial share of around 70% of the annual car production in India of about one million. The main players in the car market like Tata Motors, Maruti Udyog and Hyundai etc. are fiercely competitive and are trying to outdo each other in terms of design and technology. However, ultimately the focus of a manufacturer is providing customer satisfaction which is driven by comfort and ease of use. Automotive ergonomics is the study of how automotive can be designed better for human use. The human factor aspect of designing automobiles is first considered at the Vehicle Packaging stage. The term Vehicle Packaging comes to use whenever a new model is in the early stage of study. It is a method to safeguard and protect space for the human user and necessary components that make up the vehicle being designed. The improvement in the vehicle ergonomics requires a basic understanding of the problems that arise due to the conventional automotive interior design.

  18. Embedded Automotive System Development Process

    OpenAIRE

    Langenwalter, Joachim

    2005-01-01

    Model based design enables the automatic generation of final-build software from models for high-volume automotive embedded systems. This paper presents a framework of processes, methods and tools for the design of automotive embedded systems. A steer-by-wire system serves as an example.

  19. Intelligent use of the energy; Uso inteligente de la energia

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez Ahedo, Carlos [Director General de la Comision Nacional para el Ahorro de Energia (CONAE), Mexico D. F. (Mexico)

    2005-07-01

    Comision Nacional para el Ahorro de Energia (CONAE) is an administrative agency independent of the Secretaria de Energia that serves as a technical agency for consultancy in matters of efficient use of energy and advantageous use of renewable energies. This document searches to inform the population how to satisfy the necessity of energy in an intelligent way. For this purpose some useful actions to be performed were detected: the making of a balance between the supply and the energy demand, the consultancy on how the saving of energy is performed in order to reduce its waste, to count on equipment and efficient systems, to use domestic renewable energies and to use the solar energy and the biomass. [Spanish] La Comision Nacional para el Ahorro de Energia (CONAE) es el organo administrativo desconcentrado de la Secretaria de Energia que funge como organismo tecnico de consulta en materia de ahorro y uso eficiente de energia y aprovechamiento de energias renovables. Este documento busca informar a la poblacion acerca de como satisfacer la necesidad de energia a cambio de su utilizacion de manera inteligente, para ello se detectaron areas de oportunidad como: un balance entre la oferta y la demanda energetica, informar a la gente sobre como se efectua el ahorro de energia para con ello reducir el desperdicio de esta, contar con equipos y sistemas eficientes, usar energias renovables domesticas y utilizar la energia solar y la biomasa.

  20. Automotive battery technology

    CERN Document Server

    Watzenig, Daniel

    2014-01-01

    The use of electrochemical energy storage systems in automotive applications also involves new requirements for modeling these systems, especially in terms of model depth and model quality. Currently, mainly simple application-oriented models are used to describe the physical behavior of batteries. This book provides a step beyond of state-of-the-art modeling showing various different approaches covering following aspects: system safety, misuse behavior (crash, thermal runaway), battery state estimation and electrochemical modeling with the needed analysis (pre/post mortem). All this different approaches are developed to support the overall integration process from a multidisciplinary point-of-view and depict their further enhancements to this process.

  1. RFID-enabled real-time manufacturing for automotive part and accessory suppliers

    OpenAIRE

    Huang, GQ; Qu, T.; Y. Zhang; Yang, HD

    2010-01-01

    Automotive part and accessory manufacturers (APAMs) at the lower tiers of the automotive vertical have been following leading vehicle assemblers in adopting RFID (Radio Frequency Identification) and ubiquitous computing technologies, aiming to alleviate their advanced manufacturing systems. RFID-enabled real-time traceability and visibility facilitate the implementation of advanced strategies such as Just-In-Time (JIT) lean / responsive manufacturing and mass customization (MC). Being typical...

  2. A Design Method of Automotive Driving Axle Casing under the Random Load

    OpenAIRE

    Zheng Yanping; He Zhengang; Xu Xiaomei

    2013-01-01

    Finite life design of automobile components is an important method for lightening the automotive structure and improving vehicle performances. During driving the most typical vibration is the random vibration caused by the road roughness. In this study, by combining mechanical probabilistic fatigue analytical theory with random vibration theory and using CAD/CAE method, the correct finite element vibration analytical model of automotive driving axle casing ...

  3. Work-hardening predicition using a dislocation based model for automotive Interstitial Free (IF) steels

    OpenAIRE

    CARVALHO-RESENDE, Tales; Bouvier, Salima; BALAN, Tudor; ABED-MERAIM, Farid; Sablin, Simon-Serge

    2009-01-01

    With a view to environmental, economic and safety concerns, car manufacturers need to design lighter and safer vehicles in ever shorter development times. In recent years, High Strength Steels (HSS) like Interstitial Free (IF) steels which have higher ratios of yield strength to elastic modulus, are increasingly used for sheet metal parts in automotive industry to reduce mass. The application of simulation models in sheet metal forming in the automotive industry has proven to be beneficial to...

  4. GATE Center of Excellence at UAB in Lightweight Materials for Automotive Applications

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-07-31

    This report summarizes the accomplishments of the UAB GATE Center of Excellence in Lightweight Materials for Automotive Applications. The first Phase of the UAB DOE GATE center spanned the period 2005-2011. The UAB GATE goals coordinated with the overall goals of DOE's FreedomCAR and Vehicles Technologies initiative and DOE GATE program. The FCVT goals are: (1) Development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost; (2) To provide a new generation of engineers and scientists with knowledge and skills in advanced automotive technologies. The UAB GATE focused on both the FCVT and GATE goals in the following manner: (1) Train and produce graduates in lightweight automotive materials technologies; (2) Structure the engineering curricula to produce specialists in the automotive area; (3) Leverage automotive related industry in the State of Alabama; (4) Expose minority students to advanced technologies early in their career; (5) Develop innovative virtual classroom capabilities tied to real manufacturing operations; and (6) Integrate synergistic, multi-departmental activities to produce new product and manufacturing technologies for more damage tolerant, cost-effective, and lighter automotive structures.

  5. A Comparative Study on Automotive Brake Testing Standards

    Science.gov (United States)

    Kumbhar, Bhau Kashinath; Patil, Satyajit Ramchandra; Sawant, Suresh Maruti

    2016-06-01

    Performance testing of automotive brakes involves determination of stopping time, distance and deceleration level. Braking performance of an automobile is required to be ensured for various surfaces like dry, wet, concrete, bitumen etc. as well as for prolonged applications. Various brake testing standards are used worldwide to assure vehicle and pedestrian safety. This article presents methodologies used for automotive service brake testing for two wheelers. The main contribution of this work lies in comparative study of three main brake testing standards; viz. Indian Standards, Federal Motor Vehicle Safety Standards and European Economic Commission Standards. This study shall help the policy makers to choose the best criteria out of these three while formulating newer edition of testing standards.

  6. Fundamentals of automotive and engine technology standard drives, hybrid drives, brakes, safety systems

    CERN Document Server

    2014-01-01

    Hybrid drives and the operation of hybrid vehicles are characteristic of contemporary automotive technology. Together with the electronic driver assistant systems, hybrid technology is of the greatest importance and both cannot be ignored by today’s car drivers. This technical reference book provides the reader with a firsthand comprehensive description of significant components of automotive technology. All texts are complemented by numerous detailed illustrations. Contents History of the automobile.- History of the Diesel engine.- Areas of use for Diesel engines.- Basic principles of the Diesel engine.- Basic principles of Diesel fuel-injection.- Basic principles of the gasoline engine.- Inductive ignition system.- Transmissions for motor vehicles.- Motor vehicle safety.- Basic principles of vehicle dynamics.- Car braking systems.- Vehicle electrical systems.- Overview of electrical and electronic systems in the vehicle.- Control of gasoline engines.- Control of Diesel engines.- Lighting technology.- Elec...

  7. Software independence: impact on automotive product development process

    OpenAIRE

    M. Pappalardo; Naddeo, A.; M. Annarumma

    2008-01-01

    Purpose: Currently, in automotive industries one of the most important works in product design is the evaluationof crash events using FEM simulation; in this context, software independence, that means to obtain the samesimulation results on the same vehicle-model using different FEM solvers, will be useful for reducing virtualprototyping time and consequently Time To Market.Design/methodology/approach: The carrying out of a software-independence translation methodology is theaim of this work,...

  8. Three levels of the electromagnetic compatibility (emc) in automotive engineering

    OpenAIRE

    Sperling, D.; Körber, B.; Müller, N.

    2004-01-01

    An important quality factor for vehicles is the compliance of the Electromagnetic Compatibility (EMC). This compliance is given both through legal requirements and by voluntary defaults of the automotive manufacturers and suppliers. In this paper, some selected EMC measuring methods will be presented, whereas two of these were recently developed at the EMC research laboratory at the University of Applied Sciences Zwickau in close cooperation with Volkswagen and Audi.

  9. Influence of Multiharmonics Excitation on Rattle Noise in Automotive Gearboxes

    OpenAIRE

    Kadmiri, Y.; Perret-Liaudet, J; Rigaud, E; Le Bot, A.; Vary, L.

    2011-01-01

    We consider the automotive gearbox rattle noise resulting from vibro-impacts that can occur between the idle gears under excessive velocity fluctuations of the shaft-driving gears imposed by engine torque fluctuation. Even if the rattling phenomenon has no consequence on reliability, it may be particularly annoying for vehicle interior sound quality and acoustic comfort. The main parameters governing such kind of vibrations are the excitation source associated with engine torque fluctuation w...

  10. Offline Analysis of Independent Guarded Assertions in Automotive Integration Testing

    OpenAIRE

    Rodriguez-Navas, Guillermo; Kobetski, Avenir; Sundmark, Daniel; Gustafsson, Thomas

    2015-01-01

    The size and complexity of software in automotive systems have increased steadily over the last decades. Modern vehicles typically contain numerous electrical control units (ECUs), and more and more features require real-time interaction between several dedicated ECUs (e.g., gearbox, brake and engine control units) in order to perform their tasks. Since system safety and reliability must not be adversely affected by this increase in complexity, proper quality assurance is a must. Such quality...

  11. Evolution of Business Interoperability in the Automotive Industry

    OpenAIRE

    Wende, Kristin; Legner, Christine

    2006-01-01

    In recent years, the established roles in the automotive industry have undergone changes: Automakers which have traditionally executed control over the entire value chain are now increasingly focusing on branding and distribution. At the same time, tier-1 suppliers are becoming vehicle integrators. This paper analyses how new forms of cooperation impact the required level of business interoperability. The comparison of two cases, a traditional OEM-supplier relationship and an innovative form ...

  12. Residual Generation Methods for Fault Diagnosis with Automotive Applications

    OpenAIRE

    Svärd, Carl

    2009-01-01

    The problem of fault diagnosis consists of detecting and isolating faults present in a system. As technical systems become more and more complex and the demands for safety, reliability and environmental friendliness are rising, fault diagnosis is becoming increasingly important. One example is automotive systems, where fault diagnosis is a necessity for low emissions, high safety, high vehicle uptime, and efficient repair and maintenance. One approach to fault diagnosis, providing potentially...

  13. Robust Automotive Positioning: Integration of GPS and Relative Motion Sensors

    OpenAIRE

    Kronander, Jon

    2004-01-01

    Automotive positioning systems relying exclusively on the input from a GPS receiver, which is a line of sight sensor, tend to be sensitive to situations with limited sky visibility. Such situations include: urban environments with tall buildings; inside parking structures; underneath trees; in tunnels and under bridges. In these situations, the system has to rely on integration of relative motion sensors to estimate vehicle position. However, these sensor measurements are generally affected b...

  14. The Use of Speech Recognition Technology in Automotive Applications

    OpenAIRE

    Gellatly, Andrew William

    1997-01-01

    The research objectives were (1) to perform a detailed review of the literature on speech recognition technology and the attentional demands of driving; (2) to develop decision tools that assist designers of in-vehicle systems; (3) to experimentally examine automatic speech recognition (ASR) design parameters, input modalities, and driver ages; and (4) to provide human factors recommendations for the use of speech recognition technology in automotive applicatio...

  15. Dynamic design of automotive systems: Engine mounts and structural joints

    Indian Academy of Sciences (India)

    R Singh

    2000-06-01

    Dynamic design and vibro-acoustic modelling issues for automotive structures are illustrated via two case studies. The first case examines the role performance of passive and adaptive hydraulic engine mounts. In the second, the importance of welded joints and adhesives in vehicle bodies and chassis structures is highlighted via generic 'T' and 'L' beams assemblies. In each case, analytical and experimental results are presented. Unresolved research issues are briefly discussed.

  16. The Relationship Between Initial Quality Perceptions and Maintenance Behavior: The Case of the Automotive Industry

    OpenAIRE

    Edward Conlon; Sarv Devaraj; Khalil F. Matta

    2001-01-01

    We examine the relationship between quality, represented by consumer ratings, and quality-related activities by the customer, represented by maintenance activities in the automotive industry. Based on several converging theoretical perspectives, we present and test a model relating vehicle initial quality ratings to consumers' routine maintenance. Three types of data were collected for the study: (1) vehicle service records at a local dealership, (2) primary data from a survey of vehicle owne...

  17. Japanese automotive transportation sector's impact upon global warming

    International Nuclear Information System (INIS)

    Automobiles are still increasing in number in Japan. If this continues, CO2 emissions in this sector may increase through the first half of the 21st century. Consequently, a study of measures for reducing these CO2 emissions is essential. In this paper, possible automotive technologies, improvements in fuel consumption and the introduction of electric vehicles are discussed. These measures are then evaluated for the Japanese case. Furthermore, market penetration of these technologies is evaluated, using life-cycle cost analysis based on initial cost and annual fuel cost. It is concluded that reducing CO2 emissions to 1995 levels by 2010 is possible. This would require the simultaneous implementation of fuel-consumption improvements and the introduction of electric vehicles. However, automotive consumers would be reluctant to accept these technologies, particularly electric vehicles, because of their high purchase-price and low benefits in terms of operating economy. Acceptance will require financial and institutional support from the public sector in introducing these automotive technologies into the Japanese transportation sector. (author)

  18. United States Automotive Materials Partnership LLC (USAMP)

    Energy Technology Data Exchange (ETDEWEB)

    United States Automotive Materials Partnership

    2011-01-31

    The United States Automotive Materials Partnership LLC (USAMP) was formed in 1993 as a partnership between Chrysler Corporation, Ford Motor Company, and General Motors Corporation. Since then the U.S. Department of Energy (DOE) has supported its activities with funding and technical support. The mission of the USAMP is to conduct vehicle-oriented research and development in materials and materials processing to improve the competitiveness of the U.S. Auto Industry. Its specific goals are: (1) To conduct joint research to further the development of lightweight materials for improved automotive fuel economy; and (2) To work with the Federal government to explore opportunities for cooperative programs with the national laboratories, Federal agencies such as the DOE and universities. As a major component of the DOE's Office of FreedomCAR and Vehicle Technologies Program (FCVT) collaboration with the USAMP, the Automotive Lightweighting Materials (ALM) program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The FCVT was announced in FY 2002 and implemented in FY 2003, as a successor of the Partnership for a New Generation of Vehicles (PNGV), largely addressed under the first Cooperative Agreement. This second USAMP Cooperative Agreement with the DOE has expanded a unique and valuable framework for collaboratively directing industry and government research efforts toward the development of technologies capable of solving important societal problems related to automobile transportation. USAMP efforts are conducted by the domestic automobile manufacturers, in collaboration with materials and manufacturing suppliers, national laboratories, universities, and other technology or trade organizations. These interactions provide a direct route for implementing newly

  19. Metal-matrix composites in the automotive industry: Opportunities and challenges

    Science.gov (United States)

    Allison, John E.; Cole, Gerald S.

    1993-01-01

    Metal-matrix composites offer considerable promise to help automotive engineers meet the challenges of current and future demands for recyclable, fuel-efficient, safe, and low-emission vehicles. These materials can be engineered to match the design requirements of automotive power-train or chassis components. Technological and infrastructural barriers tend to limit the implementation of these materials, but it is believed these barriers can be overcome and that metal-matrix composites can be applied in high-volume vehicle production. Reducing these barriers will require much effort by engineers and scientists, managers and planners at automotive manufacturers, and their suppliers. The result will be the gradual introduction of metal-matrix composites in high-volume vehicle production to satisfy customer desires while meeting regulatory requirements and competitive pressures.

  20. Energia no Sistema Climático

    OpenAIRE

    Andrade, José

    2011-01-01

    AS FORMAS DE ENERGIA DO SISTEMA CLIMÁTICO. MODOS DE TRANSFERÊNCIA DE ENERGIA.A RADIAÇÃO SOLAR, TERRESTRE E ATMOSFÉRICA (características da radiação,Radiação Solar, Radiação terrestre e radiação atmosférica…. BALANÇO ENERGÉTICO DO SISTEMA GLOBO-ATMOSFERA.BALANÇO DE RADIAÇÃO DE UMA SUPERFÍCIE (Componentes do balanço de radiação,Medição e estimativa dos componentes do balanço de radiação).BALANÇO ENERGÉTICO À SUPERFÍCIE TERRESTRE.CONSEQUÊNCIAS NO MOVIMENTO DO AR ATMOSFÉRICO.EXERCÍCIOS PROPOSTOS....

  1. Beyond survival: Challenges facing South African automotive component exporters

    Directory of Open Access Journals (Sweden)

    M. J. Naude

    2006-12-01

    Full Text Available Purpose and Objective: The South African automotive component industry faces huge challenges in a very competitive global market. The primary focus of this research article is to determine the challenges facing exporters within this industry with special reference to selected sub-sectors. The challenges are approached from a supply chain perspective only. Problem Investigated: The research problem of this study was to identify these unique challenges and ascertain whether the implementation of a 'philosophy of continuous improvement' could be used as a strategic tool to address the challenges they face in the market. Methodology: This study included a combination of literature review, interviews with managers in the selected sub-groups and questionnaires sent out to determine the challenges facing automotive component exporters. In order to test the content validity and the reliability of the questionnaire, a pilot study was conducted at two organisations that are the main suppliers of automotive filters for passenger vehicles. The non-probability convenience sample technique was used to select the sample and consisted of selected sub-sectors that contribute 64,1% of the total value of automotive component exports in South Africa. Out of twenty-seven questionnaires sent out, twenty (74% response rate were duly completed by the respondents and returned to the researcher. Findings: South Africa faces unique challenges and these are listed and ranked according to priority from most to least important as follows: 1. The reduction of production costs; 2. R/US$ exchange rate effect on the respondent's export sales and profit margin; 3. Exchange rate fluctuations; 4. Threats to the local automotive component market; and 5. Increased competition by way of manufactured imports being sold in the South African market. Value of Research: The study provides recommendations that can be used within the automotive component industry.

  2. Integrated methodology for production related risk management of vehicle electronics (IMPROVE)

    OpenAIRE

    Geis, Stefan Rafael

    2006-01-01

    This scientific work is designated to provide an innovative and integrated conceptional approach to improve the assembly quality of automotive electronics. This is achieved by the reduction and elimination of production related risks of automotive electronics and the implementation of a sustainable solution process. The focus is the development and implementation of an integrated technical risk management approach for automotive electronics throughout the vehicle life cycle and the vehicle pr...

  3. Performance evaluation of an automotive thermoelectric generator

    Science.gov (United States)

    Dubitsky, Andrei O.

    Around 40% of the total fuel energy in typical internal combustion engines (ICEs) is rejected to the environment in the form of exhaust gas waste heat. Efficient recovery of this waste heat in automobiles can promise a fuel economy improvement of 5%. The thermal energy can be harvested through thermoelectric generators (TEGs) utilizing the Seebeck effect. In the present work, a versatile test bench has been designed and built in order to simulate conditions found on test vehicles. This allows experimental performance evaluation and model validation of automotive thermoelectric generators. An electrically heated exhaust gas circuit and a circulator based coolant loop enable integrated system testing of hot and cold side heat exchangers, thermoelectric modules (TEMs), and thermal interface materials at various scales. A transient thermal model of the coolant loop was created in order to design a system which can maintain constant coolant temperature under variable heat input. Additionally, as electrical heaters cannot match the transient response of an ICE, modelling was completed in order to design a relaxed exhaust flow and temperature history utilizing the system thermal lag. This profile reduced required heating power and gas flow rates by over 50%. The test bench was used to evaluate a DOE/GM initial prototype automotive TEG and validate analytical performance models. The maximum electrical power generation was found to be 54 W with a thermal conversion efficiency of 1.8%. It has been found that thermal interface management is critical for achieving maximum system performance, with novel designs being considered for further improvement.

  4. Strategies For Turkish Automotive By-Products Industry

    Directory of Open Access Journals (Sweden)

    Hakan Bütüner

    2012-06-01

    Full Text Available Automotive industry is comprised of the industry which produces vehicles, and the industry which, as dominated by Small and Medium Scale Enterprises, produces parts, modules, and systems of such vehicles according to the technical documentation. Having been established through technical and economic supports of the major manufacturers, and developed in the course of time, the by products industry is involved its activities as a significant potential for the domestic economy at present. In this article, general characteristics of Turkish automative by products industry, its weak aspects, aspects need to be improved, and dominant strategies that need to be considered for the improvement are discussed.

  5. NASA/DOE automotive Stirling engine project: Overview 1986

    Science.gov (United States)

    Beremand, D. G.; Shaltens, R. K.

    1986-01-01

    The DOE/NASA Automotive Stirling Engine Project is reviewed and its technical progress and status are presented. Key technologies in materials, seals, and piston rings are progressing well. Seven first-generation engines, and modifications thereto, have accumulated over 15,000 hr of test time, including 1100hr of in-vehicle testing. Results indicate good progress toward the program goals. The first second-generation engine is now undergoing initial testing. It is expected that the program goal of a 30-percent improvement in fuel economy will be achieved in tests of a second-generation engine in a Celebrity vehicle.

  6. NASA/DOE automotive Stirling engine project. Overview 1986

    Energy Technology Data Exchange (ETDEWEB)

    Beremand, D.G.; Shaltens, R.K.

    1986-01-01

    The DOE/NASA Automotive Stirling Engine Project is reviewed and its technical progress and status are presented. Key technologies in materials, seals, and piston rings are progressing well. Seven first-generation engines, and midifications thereto, have accumulated over 15 000 hr of test time, including 1100 hr of in-vehicle testing. Results indicate good progress toward the program goals. The first second-generation engine is now undergoing initial testing. It is expected that the program goal of a 30-percent improvement in fuel economy will be achieved in tests of a second-generation engine in a Celebrity vehicle.

  7. Energy. Chapter 4; Energia. Capitulo 4

    Energy Technology Data Exchange (ETDEWEB)

    Martin del Castillo, Carlos [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2009-07-01

    This chapter stands out that the infrastructure for the electric energy generation, as well as the one departing from fossil fuels has been the responsibility of two institutions with great solvency in the scope of engineering: the Comision Federal de Electricidad (CFE) and Petroleos Mexicanos (PEMEX). It is presented here the energy future in a sustainable context; a prospective study to year 2050; a strategic proposal of Petroleos Mexicanos; the forecast of the oil industry in Mexico and a technological prospective of the energy. [Spanish] En este capitulo se destaca que la infraestructura para la generacion de energia, tanto electrica como a partir de combustibles fisiles ha corrido a cargo de dos instituciones con gran solvencia en el ambito de la ingenieria: la Comision Federal de Electricidad (CFE) y Petroleos Mexicanos (Pemex). Se presenta el futuro de la energia en un contexto sustentable; un estudio prospectivo al ano 2050; una propuesta estrategica de Petroleos Mexicanos; la prospectiva de la industria petrolera en Mexico y; una prospectiva tecnologica de la energia.

  8. The European automotive LPG market

    International Nuclear Information System (INIS)

    The European automotive LPG market could reach at least 4 % of the European fuel market in 2005 versus 1 % in 1990. This would represent a rise of about 35 % in automotive LPG sales (from 2,4 million tonnes in 1997 to 7 million tonnes estimated for 2005). This was underlined by Alain Deleuse, Primagaz group's Marketing Director, in the paper he delivered at the AEGPL Budapest Convention. We publish large excepts of this paper. (author)

  9. Multicore scheduling in automotive ECUs

    OpenAIRE

    Monot, Aurélien; Navet, Nicolas; Bavoux, Bernard; Simonot-Lion, Françoise

    2010-01-01

    As the demand for computing power is quickly increasing in the automotive domain, car manufacturers and tier-one suppliers are gradually introducing multicore ECUs in their electronic architectures. Additionally, these multicore ECUs offer new features such as higher levels of parallelism which eases the espect of the safety requirements introduced by the ISO 26262 and can be taken advantage of in various other automotive use-cases. These new features involve also more complexity in the desig...

  10. A heat exchanger analogy of automotive paint ovens

    International Nuclear Information System (INIS)

    Computational prediction of vehicle temperatures in an automotive paint oven is essential to predict paint quality and manufacturability. The complex geometry of vehicles, varying scales in the flow, transient nature of the process, and the tightly coupled conjugate heat transfer render the numerical models computationally very expensive. Here, a novel, simplified model of the oven is developed using an analogy to a three-stream cross flow heat exchanger that transfers heat from air to a series of moving bodies and supporting carriers. The analogous heat exchanger equations are developed and solved numerically. Steady state Computational Fluid Dynamics (CFD) simulations are carried out to model the flow field and to extract the heat transfer coefficients around the body and carriers. The air temperature distribution from the CFD models is used as a boundary condition in the analogous model. Correction coefficients are used in the analogy to take care of various assumptions. These are determined from existing test data. The same corrections are used to predict air temperatures for a modified configuration of the oven and a different vehicle. The method can be used to conduct control volume analysis of ovens to determine energy efficiency, and to study new vehicle or oven designs. -- Highlights: • Analogy of an automotive paint oven as a three stream cross flow heat exchanger. • The three streams are vehicle bodies, carriers and hot air. • Convection coefficients and inlet air stream temperatures from steady CFD simulations. • Analogy useful for overall energy efficiency analysis of conveyor ovens in general

  11. Fault Detection for Automotive Shock Absorber

    Science.gov (United States)

    Hernandez-Alcantara, Diana; Morales-Menendez, Ruben; Amezquita-Brooks, Luis

    2015-11-01

    Fault detection for automotive semi-active shock absorbers is a challenge due to the non-linear dynamics and the strong influence of the disturbances such as the road profile. First obstacle for this task, is the modeling of the fault, which has been shown to be of multiplicative nature. Many of the most widespread fault detection schemes consider additive faults. Two model-based fault algorithms for semiactive shock absorber are compared: an observer-based approach and a parameter identification approach. The performance of these schemes is validated and compared using a commercial vehicle model that was experimentally validated. Early results shows that a parameter identification approach is more accurate, whereas an observer-based approach is less sensible to parametric uncertainty.

  12. Simulation of the noise transmission through automotive door seals

    CERN Document Server

    Hazir, Andreas

    2016-01-01

    Andreas Hazir is investigating the door seal contribution to the interior noise level of production vehicles. These investigations contain experimental contribution analyses of real production vehicles and of academic test cases as well as the development of a simulation methodology for noise transmission through sealing systems and side windows. The simulations are realized by coupling transient computational aeroacoustics of the exterior flow to nonlinear finite element simulations of the structural transmission. By introducing a linear transmission model, the setup and computational costs of the seal noise transmission are significantly reduced, resulting in the feasibility of numerical contribution analyses of real production vehicles. Contents Contribution Analyses of Production Vehicles Acoustic Excitation versus Aeroacoustic Excitation Development of a Simulation Methodology Sensitivity Analysis of Noise Transmission Simulations Target Groups Researchers and students in the field of automotive engineer...

  13. Härra Eesti Energia lahkus haruldase kaevurikirkaga / Andrus Karnau

    Index Scriptorium Estoniae

    Karnau, Andrus

    2005-01-01

    30. novembril oli Eesti Energia juhi kohalt lahkuval Gunnar Okil viimane tööpäev, kuigi Eesti Energia juhatus pakkus Gunnar Okile korralise lepingu lõppemise järel aastast lepingut, keeldus juhatuse esimees selle sõlmimisest. Lisa: Oki-ajastu

  14. Eesti Energia pakuks börsil boonusaktsiaid / Agnes Ojala

    Index Scriptorium Estoniae

    Ojala, Agnes

    2010-01-01

    Majandus- ja kommunikatsiooniministeerium valmistub Eesti Energia aktsia avalikuks pakkumiseks. Riik soovib, et aktsionäride hulgas oleks rohkelt tavakodanikke, aktsiate ostmise motiveerimiseks lubatakse, et aasta pärast kingitakse lisaaktsiaid. Rahandusministeerium peab otsima alternatiive, kuidas Eesti Energia saaks lisaraha börsile minemata

  15. Parts harvendas ootamatult Eesti Energia nõukogu / Andres Eilart

    Index Scriptorium Estoniae

    Eilart, Andres

    2011-01-01

    Majandus- ja kommunikatsiooniminister Juhan Parts otsustas 1. juulil päevapealt Eesti Energia nõukogu liikme kohalt tagasi kutsuda Aivar Reiviku ning Rein Kuusmiku, kes olid vastu Eesti Energia üle viie miljoni euro suurusele investeeringule Weroli rapsiõlitehase juurde rajatavasse elektri- ja küttejaama. Uuteks nõukogu liikmeteks said Andres Saame ja Toomas Tauts

  16. Eesti Energia asub uurima Jordaania põlevkivivarusid

    Index Scriptorium Estoniae

    2006-01-01

    Eesti Energia tütarfirma Oil Shale Energy of Jordan ja Jordaania valitsus kirjutasid alla ühiste kavatsuste kokkuleppele. Eesti Energia kavatseb teha Jordaania tütarettevõtte abiga uuringuid, eesmärk on rajada Jordaaniasse põlevkiviõlitehas. Kaart

  17. Dow Corning photonics: the silicon advantage in automotive photonics

    Science.gov (United States)

    Clapp, Terry V.; Paquet, Rene; Norris, Ann; Pettersen, Babette

    2005-02-01

    The Automotive Market offers several opportunities for Dow Corning to leverage the power of silicon-based materials. Dow Corning Photonics Solutions has a number of developments that may be attractive for the emergent photonics needs in automobiles, building on 40 years of experience as a leading Automotive supplier with a strong foundation of expertise and an extensive product offering- from encapsulents and highly reliable resins, adhesives, insulating materials and other products, ensuring that the advantage of silicones are already well-embedded in Automotive systems, modules and components. The recent development of LED encapsulants of exceptional clarity and stability has extended the potential for Dow Corning"s strength in Photonics to be deployed "in-car". Demonstration of board-level and back-plane solutions utilising siloxane waveguide technology offers new opportunities for systems designers to integrate optical components at low cost on diverse substrates. Coupled with work on simple waveguide technology for sensors and data communications applications this suite of materials and technology offerings is very potent in this sector. The harsh environment under hood and the very extreme thermal range that materials must sustain in vehicles due to both their engine and the climate is an applications specification that defines the siloxane advantage. For these passive optics applications the siloxanes very high clarity at the data-communications wavelengths coupled with extraordinary stability offers significant design advantage. The future development of Head-Up-Displays for instrumentation and data display will offer yet more opportunities to the siloxanes in Automotive Photonics.

  18. The Promotion of Solar Vehicles

    OpenAIRE

    Wilfried Puwein

    1991-01-01

    Solar vehicles, which do not rely on the public electricity system, significantly ease the ecological problems connected with individual automotive transportation. If the public electricity system is to be used to reload the batteries the ecological benefits are reduced. The high costs of producing batteries and the generation of electricity in photovoltaic facilities presumably lower the benefits of promoting solar vehicles below that of promoting public transportation.

  19. A Secure Mechanism to Supervise Automotive Sensor Network by Client on Smart Phone

    Directory of Open Access Journals (Sweden)

    T R Yashavanth

    2013-03-01

    Full Text Available This paper presents a proposal on design of a secure client on smart phone to monitor automotive sensor network. Recently, more and more vehicles, such as BMW X5, are connected from outside via smart phone [3]. From smart phone, users can use the internet resources in automotive. Users can monitor the automotives by using their smart phones. When the automotive is moving or stolen by robber, alert information will be reported to users and users can even brake their automotive via smart phone in emergency status by sending control command to the vehicle information gateway. So client software in smart phone is required to monitor the sensor network in automotives. In order to prevent malicious attack on the client software by malicious attackers which are usually the robbers, there should be a mechanism provided to the clients which offers security by considering few criteria’s like power of computation, level of security and consumption of power. This proposed method uses IDEA for the encryption of all the messages since IDEA has high level of security and suitable to implement in software and also demands on computational power is less. Record management set is being suggested for the storage of critical data which is a Java MIDlet based mechanism. Between client software and its gateway a communication management on transaction is also proposed. The verification of the key updating process is verified with model checking in UPPAAL [7].

  20. Gas-oil/water emulsion fuel for automotive diesel engines. energia

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    In this paper the work performed within the contract EE-C-201-I is reported. The results achieved in the tests of high speed diesel engines with water in oil emulsion feeding system are summarized. First, carried out trials on test bench are described; then operation in light duty truck on the road and on roller test bench is reported and trials with constant speed diesel engine are related. Finally, the work about emulsion characterization is synthetized. The conclusion shows as the water in oil emulsion is a feeding system suitable for high speed diesel engine operation because BSFC, grade of smoke, exhaust temperature and emission are lowered without considerable troubles.

  1. Automotive Sensors and MEMS Technology

    Science.gov (United States)

    Nonomura, Yutaka

    - Automotive sensors are used for emission gas purification, energy conservation, car kinematic performance, safety and ITS (intelligent transportation system). The comparison of the sensor characteristics was made for their application area. Many kinds of the principles are applied for the sensors. There are two types of sensors, such as physical and chemical one. Many of the automotive sensors are physical type such as mechanical sensors. And a gas sensor is a chemical type. The sensors have been remarkably developed with the advancement of the MEMS (Micro Electro Mechanical Systems) technology. In this paper, gas, pressure, combustion pressure, acceleration, magnetic, and angular rate sensors for automotive use are explained with their features. The sensors are key devices to control cars in the engine, power train, chassis and safety systems. The environment resistance, long term reliability, and low cost are required for the automotive sensors. They are very hard to be resolved. However, the sensor technology contributes greatly to improving global environment, energy conservation, and safety. The applications of automotive sensors will be expanded with the automobile developments.

  2. Supplier Selection in the Thai Automotive Industry

    OpenAIRE

    Nopprach, Somsupa

    2006-01-01

    This paper uses agglomeration theory to analyze the impact of Thai government policies on the development of the Thai automotive industry and cluster formation in Central and Eastern Thailand. Using cross-section data on 162 auto-parts suppliers from the Thailand Automotive Directory 2003-2004, the paper examines the criteria of supplier selection in the Thai automotive industry. Using logit models and cross-section data on 162 auto-parts suppliers from the Thailand Automotive Directory 2003-...

  3. Automotive Technology and Human Factors Research: Past, Present, and Future

    Directory of Open Access Journals (Sweden)

    Motoyuki Akamatsu

    2013-01-01

    Full Text Available This paper reviews the history of automotive technology development and human factors research, largely by decade, since the inception of the automobile. The human factors aspects were classified into primary driving task aspects (controls, displays, and visibility, driver workspace (seating and packaging, vibration, comfort, and climate, driver’s condition (fatigue and impairment, crash injury, advanced driver-assistance systems, external communication access, and driving behavior. For each era, the paper describes the SAE and ISO standards developed, the major organizations and conferences established, the major news stories affecting vehicle safety, and the general social context. The paper ends with a discussion of what can be learned from this historical review and the major issues to be addressed. A major contribution of this paper is more than 180 references that represent the foundation of automotive human factors, which should be considered core knowledge and should be familiar to those in the profession.

  4. Design Analysis of an Automotive Composite Drive Shaft

    Directory of Open Access Journals (Sweden)

    R.A. Hossain

    2010-04-01

    Full Text Available Automotive drive Shaft is a very important components of vehicle. The present paper focuses on the design of such an automotive drive shat by composite materials. Now a days two pieces steel shaft are used as drive shaft. However, the main advantages of the present design is;only one piece of composite drive shat is possible that fulfil allthe requirements of drive shaft. Two different designs are proposed, one is purely from Graphite/Epoxy lamina and other is using Aluminum with Graphite/Epoxy. The basic requirements considered here are torsional strength, torsional buckling and bending natural frequency. An optimum design of the draft shaft is done, which is cheapest and lightest but meets all of the above load requirements. Progressive failure analysis of the selected design is also done.

  5. Making aerospace technology work for the automotive industry, introduction

    Science.gov (United States)

    Olson, W. T.

    1978-01-01

    NASA derived technology already in use in the automotive industry include: (1) developments in electronics design, computer systems, and quality control methods for line testing of cars and trucks; (2) a combustion analysis computer program for automotive engine research and development; (3) an infrared scanner and television display for analyzing tire design and performance, and for studying the effects of heat on the service life of V-belts, shock mounts, brakes, and rubber bearings; (4) exhaust gas analyzers for trouble shooting and emissions certification; (5) a device for reducing noise from trucks; and (6) a low cost test vehicle for measuring highway skid resistance. Services offered by NASA to facilitate access to its technology are described.

  6. Mockup Didatic Set for Students Development in Automotive Electronic

    Directory of Open Access Journals (Sweden)

    Fabio Delatore

    2013-05-01

    Full Text Available The automotive engineering education area, specifically on internal combustion engine, requires the use of suitable systems, capable to simulate, test and obtain specifics data from its operation. Automotive engines are so complex due to it is a mix of engineering subjects, so, a mockup was created to help its study. The mockup is an exactly the same engine that equips a vehicle, but assembled in a mechanical base, equipped with all the necessary components for running it up. The objective of this work is to develop a mockup with a suitable Electronic Control Unit (ECU board, in order to obtain the sensors/actuators signals from the engine and control some important engine functions by using an external ECU, so that the students may test their own strategies, compare with the original ECU.

  7. DYNAMIC TASK SCHEDULING ON MULTICORE AUTOMOTIVE ECUS

    Directory of Open Access Journals (Sweden)

    Geetishree Mishra

    2014-12-01

    Full Text Available Automobile manufacturers are controlled by stringent govt. regulations for safety and fuel emissions and motivated towards adding more advanced features and sophisticated applications to the existing electronic system. Ever increasing customer’s demands for high level of comfort also necessitate providing even more sophistication in vehicle electronics system. All these, directly make the vehicle software system more complex and computationally more intensive. In turn, this demands very high computational capability of the microprocessor used in electronic control unit (ECU. In this regard, multicore processors have already been implemented in some of the task rigorous ECUs like, power train, image processing and infotainment. To achieve greater performance from these multicore processors, parallelized ECU software needs to be efficiently scheduled by the underlaying operating system for execution to utilize all the computational cores to the maximum extent possible and meet the real time constraint. In this paper, we propose a dynamic task scheduler for multicore engine control ECU that provides maximum CPU utilization, minimized preemption overhead, minimum average waiting time and all the tasks meet their real time deadlines while compared to the static priority scheduling suggested by Automotive Open Systems Architecture (AUTOSAR

  8. Dynamic Task Scheduling on Multicore Automotive ECUs

    Directory of Open Access Journals (Sweden)

    Geetishree Mishra

    2014-12-01

    Full Text Available Automobile manufacturers are controlled by stringen t govt. regulations for safety and fuel emissions a nd motivated towards adding more advanced features and sophisticated applications to the existing electro nic system. Ever increasing customer’s demands for high level of comfort also necessitate providing even m ore sophistication in vehicle electronics system. All t hese, directly make the vehicle software system mor e complex and computationally more intensive. In turn , this demands very high computational capability o f the microprocessor used in electronic control unit (ECU. In this regard, multicore processors have already been implemented in some of the task rigoro us ECUs like, power train, image processing and infotainment. To achieve greater performance from t hese multicore processors, parallelized ECU softwar e needs to be efficiently scheduled by the underlayin g operating system for execution to utilize all the computational cores to the maximum extent possible and meet the real time constraint. In this paper, w e propose a dynamic task scheduler for multicore engi ne control ECU that provides maximum CPU utilization, minimized preemption overhead, minimum average waiting time and all the tasks meet their real time deadlines while compared to the static pr iority scheduling suggested by Automotive Open Syst ems Architecture (AUTOSAR.

  9. Joining of Dissimilar alloy Sheets (Al 6063&AISI 304) during Resistance Spot Welding Process: A Feasibility Study for Automotive industry

    OpenAIRE

    Reddy Sreenivasulu

    2014-01-01

    Present design trends in automotive manufacture have shifted emphasis to alternative lightweight materials in order to achieve higher fuel efficiency and to bring down vehicle emission. Although some other joining techniques are more and more being used, spot welding still remains the primary joining method in automobile manufacturing so far. Spot welds for automotive applications should have a sufficiently large diameter, so that nugget pullout mode is the dominant failure mode. Interfacial ...

  10. An Architectural Approach to Autonomics and Self-management of Automotive Embedded Electronic Systems

    OpenAIRE

    Chen, DeJiu; Anthony, Richard; Persson, Magnus; Friesen, Viktor; de Boer, Gerrit; Rettberg, Achim; Ekelin, Cecilia

    2008-01-01

    Embedded electronic systems in vehiclesare of rapidly increasing commercial importance forthe automotive industry. While current vehicularembedded systems are extremely limited and static,a more dynamic configurable system would greatlysimplify the integration work and increase quality ofvehicular systems. This brings in features likeseparation of concerns, customised softwareconfiguration for individual vehicles, seamlessconnectivity, and plug-and-play capability.Furthermore, such a system c...

  11. Industrial renewal and inter-firm relations in the supply chain of the Brazilian automotive industry

    OpenAIRE

    Posthuma, Anne Caroline

    2004-01-01

    Explores the rapid restructuring of the Brazilian automotive industry from the late 1990s to 2003. Highlights transformations in the composition of the vehicle assembly and components suppliers industries and analyses changes in inter-firm relations. Examines new practices in supply chain management and looks at human resource management and labour-management relations.

  12. Towards the automotive HMI of the future: Overview of the AIDE - Integrated project results

    NARCIS (Netherlands)

    Amditis, A.; Andreone, L.; Pagle, K.; Markkula, G.; Deregibus, E.; Romera Rue, M.; Bellotti, F.; Engelsberg, A.; Brouwer, R.; Peters, B.; Gloria, A. de

    2010-01-01

    The Adaptive Integrated Driver-vehicle interfacE (AIDE) is an integrated project funded by the European Commission in the Sixth Framework Programme. The project, which involves 31 partners from the European automotive industry and academia, deals with behavioral and technical issues related to autom

  13. Automotive Service Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 0912

    Science.gov (United States)

    Alberta Advanced Education and Technology, 2012

    2012-01-01

    The graduate of the Automotive Service Technician apprenticeship program is a certified journeyperson who will be able to: (1) repair, maintain and overhaul or modify a motor vehicle; (2) comprehend work orders, technical bulletins and estimates, and relate the information to the job at hand; (3) interpret warranty policy in terms of service…

  14. Hydrogen patent portfolios in the automotive industry - the search for promising storage methods

    NARCIS (Netherlands)

    Bakker, S.

    2010-01-01

    In the development of hydrogen vehicle technologies, the automotive industry adopts a portfolio approach; a multitude of technological options is developed for hydrogen storage and conversion. Patent portfolios of car manufacturers are used as indicators of the variation and selection dynamics of di

  15. Integration of different simulation tools for the development of next generation Automotive Safety Systems

    NARCIS (Netherlands)

    Noort, M. van; Versteegh, T.; Tideman, M.

    2012-01-01

    The development of intelligent in-car systems and connected vehicle systems is of major concern to the automotive industry. These systems need to function properly in a vast amount of different traffic scenarios, which involves interaction with other traffic actors, both human and technical, in a la

  16. Change in the automotive industry; Fordonsindustrin i foeraendring

    Energy Technology Data Exchange (ETDEWEB)

    Fjaellstroem, Mikael [Swedish Energy Agency, Eskilstuna (Sweden); Pohl, Hans [Sycon Energikonsult AB, Malmoe (Sweden); Liljemark, Stefan [SwedPower AB (Sweden); Leander, Aasa [Swedish Energy Agency, Eskilstuna (Sweden); Maruo, Kanehira [Chalmers Univ. of Tech., Goeteborg (Sweden); Waldenby, Torbjoern [JIC Consulting AB, Goeteborg (Sweden); Mellgren, Henry [Fordonskomponentgruppen, Goeteborg (Sweden)

    2002-04-01

    The 'Change in the Automotive Industry' investigation was initiated by the Swedish Energy Agency in the autumn of 2000. The objective has been to illuminate and analyse technical developments in respect of the use of electricity in vehicles, not only for various ancillary systems but also for propulsion. A number of Swedish businesses that have, or could have, links with the automotive industry have been investigated. The main aim has been to attempt to identify the opportunities for the industry to meet and benefit from the changes. A total of 14 businesses have been visited, and a further 29 companies have replied to a survey questionnaire on the theme. Business intelligence shows that a great deal of work is being done on the use of electricity for automotive propulsion, in everything from battery vehicles, via electric hybrid vehicles to fuel cell vehicles. In terms of development, the Japanese manufacturers are in the lead, while the USA constitutes the largest single driving force behind development. The technical development requires a greater understanding within several new disciplines, and leads to major changes between different industry sectors. The results show that Sweden possesses world class expertise in several of the fields that can become very important for tomorrow's automotive industry. At the same time, the companies expect difficulties in recruiting personnel qualified in the appropriate disciplines, such as development and design. There is, therefore, a clear risk that the present-day expertise will progressively fade away if nothing is done.There is a wide range of awareness of the greater use of electricity in vehicles. However, in principle, all companies feel that development towards new drive trains will proceed rapidly. Most of the companies are also very interested in descriptions and analyses of the state of development. The general conclusion of the work is that there are excellent prospects for Swedish industry to

  17. Advanced Emergency Braking Controller Design for Pedestrian Protection Oriented Automotive Collision Avoidance System

    OpenAIRE

    Guo Lie; Ren Zejian; Ge Pingshu; Chang Jing

    2014-01-01

    Automotive collision avoidance system, which aims to enhance the active safety of the vehicle, has become a hot research topic in recent years. However, most of the current systems ignore the active protection of pedestrian and other vulnerable groups in the transportation system. An advanced emergency braking control system is studied by taking into account the pedestrians and the vehicles. Three typical braking scenarios are defined and the safety situations are assessed by comparing the cu...

  18. Reverse engineering technologies for remanufacturing of automotive systems communicating via CAN bus

    OpenAIRE

    Freiberger, Stefanrger; Albrecht, Matthias; Käufl, Josef

    2011-01-01

    Nowadays, as mechatronic and electronic systems have found their way into vehicles, the technological knowledgebase of traditional remanufacturing companies erodes rapidly and even the industrial principle of remanufacturing is at risk. Due to the fact that modern cars incorporate up to 80 of these mechatronic and electronic systems that are communicating with each other e.g. via the vehicle controller area network (CAN), remanufacturing of these automotive systems requires innovative reverse...

  19. Consumers¡¯ Acceptance towards Green Technology in Automotive Industries in Malacca, Malaysia

    OpenAIRE

    2014-01-01

    The environmental global issues reposition industries to produce more environmental friendly product that will reduce damages towards global environment leading to adoption of green technology including automotive industries. However, Malaysian consumers¡¯ readiness to accept green technology embedded in vehicle need researching. Based on cost and benefit analysis, this research aims at revealing buying decision on vehicle adopting green technology testing on sample of regression is used. The...

  20. MICROALLOYED STEELS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Debanshu Bhattacharya

    2014-12-01

    is the so-called “3rd Generation” AHSS. These steels are designed to fill the region between the dual-phase/TRIP and the Twin Induced Plasticity (TWIP steels with very high ductility at strength levels comparable to the conventional AHSS. Enhanced Q&P steels may be one method to achieve this target. Other ideas include TRIP assisted dual phase steels, high manganese steels and carbide-free bainitic (CFB steels. Finally the post hardened steels (PHS are an important component of the strategy of future vehicles. In this paper, some of the above families of advanced formable and high strength steels with micro-alloying additions, utilized in the automotive industry will be discussed.

  1. Automotive Electronics. Teacher Edition (Revised).

    Science.gov (United States)

    Mackert, Howard C.; Heiserman, Russell L.

    This learning module addresses computers and their applications in contemporary automobiles. The text provides students with information on automotive microcomputers and hands-on activities that will help them see how semiconductors and digital logic devices fit into the modern repair facility. The module contains nine instructional units that…

  2. Automotive Technologies. State Competency Profile.

    Science.gov (United States)

    Ohio Board of Regents, Columbus.

    This document, which lists the technical automotive technologies competencies identified by representatives from business, industry, and labor as well as technical educators throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary…

  3. Human factors in automotive innovation

    NARCIS (Netherlands)

    Terken, J.; Ham, J.; Hoedemaeker, M.

    2011-01-01

    Many automotive innovations affect the driver's task and/or the driving experience. In this paper we argue that successful innovation in these cases requires that due attention is given to Human Factors issues in the course of the innovation process. We support this claim by examples from several re

  4. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  5. Automotive Cooling and Lubricating Systems.

    Science.gov (United States)

    Marine Corps Inst., Washington, DC.

    This correspondence course, originally developed for the Marine Corps, is designed to provide new mechanics with a source of study materials to assist them in becoming more proficient in their jobs. The course contains four study units covering automotive cooling system maintenance, cooling system repair, lubricating systems, and lubrication…

  6. Eesti Energia kavandab Paljassaarde kahte tuulikut / Urmas Seaver

    Index Scriptorium Estoniae

    Seaver, Urmas, 1973-

    2001-01-01

    Eesti Energia kavatseb koos Tallinna Tehnikaülikooli ja Saksa firmaga Enercon GmbH panna Paljassaare poolsaare tippu üles kaks ligi 8 mln krooni maksvat tuulegeneraatorit. Kaart: Paljassaare tuulikud

  7. Eesti Energia pikaajaline investeeringuplaan vajab raha / Helga Koger

    Index Scriptorium Estoniae

    Koger, Helga, 1945-

    2008-01-01

    Eesti Energi juht Sandor Liive küsis valitsuskabinetis tulevikuplaane esitledes ettevõtte aktsiakapitali laiendamiseks juurde 500 miljonit eurot. Eesti Energia on koostanud investeerimisplaani aastateks 2009-2018, lisaks tahab ta kehtestada energiajulgeolekumaksu

  8. Performance analysis of a waste heat recovery thermoelectric generation system for automotive application

    International Nuclear Information System (INIS)

    Graphical abstract: A new automotive exhaust-based thermoelectric generator and its “four-TEGs” system are constructed, and the performance characteristics of system are discussed through road test and revolving drum test. - Highlights: • The automotive thermoelectric generator system was constructed and studied. • Road test and revolving drum test were used to measure the output power. • A performance of 201.7 V (open circuit voltage)/944 W obtained. - Abstract: Thermoelectric power generators are one of the promising green energy sources. In this case study, an energy-harvesting system which extracts heat from an automotive exhaust pipe and turns the heat into electricity by using thermoelectric power generators (TEGs) has been constructed. The test bench is developed to analysis the performance of TEG system characteristics, which are undertaken to assess the feasibility of automotive applications. Based on the test bench, a new system called “four-TEGs” system is designed and assembled into prototype vehicle called “Warrior”, through the road test and revolving drum test table, characteristics of the system such as hot-side temperature, cold-side temperature, open circuit voltage and power output are studied, and a maximum power of 944 W was obtained, which completely meets the automotive application. The present study shows the promising potential of using this kind of thermoelectric generator for low-temperature waste heat recovery vehicle

  9. Study of LED modulation effect on the photometric quantities and beam homogeneity of automotive lighting

    Science.gov (United States)

    Koudelka, Petr; Hanulak, Patrik; Jaros, Jakub; Papes, Martin; Latal, Jan; Siska, Petr; Vasinek, Vladimir

    2015-07-01

    This paper discusses the implementation of a light emitting diode based visible light communication system for optical vehicle-to-vehicle (V2V) communications in road safety applications. The widespread use of LEDs as light sources has reached into automotive fields. For example, LEDs are used for taillights, daytime running lights, brake lights, headlights, and traffic signals. Future in the optical vehicle-to-vehicle (V2V) communications will be based on an optical wireless communication technology that using LED transmitter and a camera receiver (OCI; optical communication image sensor). Utilization of optical V2V communication systems in automotive industry naturally brings a lot of problems. Among them belongs necessity of circuit implementation into the current concepts of electronic LED lights control that allows LED modulation. These circuits are quite complicated especially in case of luxury cars. Other problem is correct design of modulation circuits so that final vehicle lightning using optical vehicle-to-vehicle (V2V) communication meets standard requirements on Photometric Quantities and Beam Homogeneity. Authors of this article performed research on optical vehicle-to-vehicle (V2V) communication possibilities of headlight (Jaguar) and taillight (Skoda) in terms of modulation circuits (M-PSK, M-QAM) implementation into the lamp concepts and final fulfilment of mandatory standards on Photometric Quantities and Beam Homogeneity.

  10. Eesti Energia sihib hiiglaslikku hinnatõusu / Andrus Karnau

    Index Scriptorium Estoniae

    Karnau, Andrus

    2007-01-01

    Ilmunud ka: Postimees : na russkom jazõke, 5. sept. 2007, lk. 2. Eesti Energia taotleb 2007. aasta märtsikuust 23%-list hinnatõusu. Energiaturu inspektsiooni (ETI) juhi Märt Otsa sõnul pole teada, mis otsuse inspektsioon hinnatõusu küsimuses langetab. Diagramm: Elektri hind tõuseb jõudsalt. Vt. samas intervjuud Eesti Energia juhatuse liikme Tiit Niguliga

  11. The French market of automotive fuels; Marche francais des carburants

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2003-02-01

    The supermarkets are the main retailers of automotive fuels in France. With a growth of 1.7 point of market share, the supermarkets represented 57.2% of the fuel sales (in volume) in 2001. This performance is due to both their discount policy and their fast development over the whole territory. However, the oil companies have started a counter-offensive policy with new offers of services and more competitive prices. This article summarizes the results of an economic study carried out in July 2002 by Xerfi S.A. using the 2001 fuel sales data and the 2002-2003 vehicle sales forecasts. (J.S.)

  12. CONCEPT MODELING TECHNIQUES FOR THE DESIGN OF AUTOMOTIVE STRUCTURES

    OpenAIRE

    Pavlina Georgieva Brandiska

    2013-01-01

    During the last decades the overall trend in the automotive industry has been to shorten the design cycles and decrease the production costs while increasing the product quality with respect to competitors. In such a context there is an ever growing need for analysis that leads the design process from the concept phase onward. On the other hand, a conventional Finite Element (FE) model of a vehicle can be created only when its detailed Computer-Aided Design (CAD) model is available, which aut...

  13. Advantages and challenges of dissimilar materials in automotive lightweight construction

    Science.gov (United States)

    Weberpals, Jan-Philipp; Schmidt, Philipp A.; Böhm, Daniel; Müller, Steffen

    2015-03-01

    The core of future automotive lightweight materials is the joining technology of various material mixes. The type of joining will be essential, particularly in electrified propulsion systems, especially as an improved electrical energy transmission leads to a higher total efficiency of the vehicle. The most evident parts to start the optimization process are the traction battery, the electrical performance modules and the engines. Consequently aluminum plays a very central role for lightweight construction applications. However, the physical-technical requirements of components often require the combination with other materials. Thus the joining of mixed material connections is an essential key technology for many of the current developments, for example in the areas E-Mobility, solar energy and lightweight construction. Due to these advantages mixed material joints are already established in the automotive industry and laser beam remote welding is now a focus technology for mixed material connections. The secret of the laser welding process with mixed materials lies within the different areas of the melting phase diagram depending on the mixing ratio and the cooling down rate. According to that areas with unwanted, prim, intermetallic phases arise in the fusion zone. Therefore, laser welding of mixed material connections can currently only be used with additional filler in the automotive industry.

  14. Fast automotive diesel exhaust measurement using quantum cascade lasers

    Science.gov (United States)

    Herbst, J.; Brunner, R.; Lambrecht, A.

    2013-12-01

    Step by step, US and European legislations enforce the further reduction of atmospheric pollution caused by automotive exhaust emissions. This is pushing automotive development worldwide. Fuel efficient diesel engines with SCRtechnology can impede NO2-emission by reduction with NH3 down to the ppm range. To meet the very low emission limits of the Euro6 resp. US NLEV (National Low Emission Vehicle) regulations, automotive manufacturers have to optimize continuously all phases of engine operation and corresponding catalytic converters. Especially nonstationary operation holds a high potential for optimizing gasoline consumption and further reducing of pollutant emissions. Test equipment has to cope with demanding sensitivity and speed requirements. In the past Fraunhofer IPM has developed a fast emission analyzer called DEGAS (Dynamic Exhaust Gas Analyzer System), based on cryogenically cooled lead salt lasers. These systems have been used at Volkswagen AG`s test benches for a decade. Recently, IPM has developed DEGAS-Next which is based on cw quantum cascade lasers and thermoelectrically cooled detectors. The system is capable to measure three gas components (i.e. NO, NO2, NH3) in two channels with a time resolution of 20 ms and 1 ppm detection limits. We shall present test data and a comparison with fast FTIR measurements.

  15. 16 CFR 306.10 - Automotive fuel rating posting.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Automotive fuel rating posting. 306.10... AUTOMOTIVE FUEL RATINGS, CERTIFICATION AND POSTING Duties of Retailers § 306.10 Automotive fuel rating posting. (a) If you are a retailer, you must post the automotive fuel rating of all automotive fuel...

  16. GLOBAL PERSPECTIVES IN AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    NICOLETA ISAC

    2010-01-01

    Full Text Available The automotive sector is characterised by a relatively low trade/salesratio. While the production of most automotive producers in the world is spread over variouscountries in the value chain, the brands are still considered to reflect some national identity.Internationalisation strategies may change over the lifecycle of the product and automakerstend to pursue diametrically opposed strategies. In mature markets, it is about managing whatgoes on beneath a static surface; in emerging markets’ dynamic environments, companies muststrategically position themselves to benefit from growth opportunities. However, without theright strategy and execution in mature markets, it is clear that traditional OEMs cannot profitfrom emerging markets-the persistence of structural issues in mature market operationseventually will rob all but the most resilient competitors of the opportunity to compete inemerging markets.

  17. Advanced Materials for Automotive Application

    International Nuclear Information System (INIS)

    In this paper some recent material developments will be overviewed mainly from the point of view of automotive industry. In car industry, metal forming is one of the most important manufacturing processes imposing severe restrictions on materials; these are often contradictory requirements, e.g. high strength simultaneously with good formability, etc. Due to these challenges and the ever increasing demand new material classes have been developed; however, the more and more wide application of high strength materials meeting the requirements stated by the mass reduction lead to increasing difficulties concerning the formability which requires significant technological developments as well. In this paper, the recent materials developments will be overviewed from the point of view of the automotive industry

  18. Rejuvenation of automotive fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yu Seung; Langlois, David A.

    2016-08-23

    A process for rejuvenating fuel cells has been demonstrated to improve the performance of polymer exchange membrane fuel cells with platinum/ionomer electrodes. The process involves dehydrating a fuel cell and exposing at least the cathode of the fuel cell to dry gas (nitrogen, for example) at a temperature higher than the operating temperature of the fuel cell. The process may be used to prolong the operating lifetime of an automotive fuel cell.

  19. Noise Radiation from Automotive Turbochargers

    OpenAIRE

    Zhenrui, Wang

    2011-01-01

    Turbochargers are now commonly used in modern automotive engines, which increase the density of air entering the engine to produce more power. This device not only greatly improves the degree of engine efficiency, but also reduces the pollutant emissions. However, one of the important issues which must be considered is the noise from turbochargers. This noise can radiate either after propagation through the intake and exhaust ducts or via induced vibrations in the turbocharger housing. Here t...

  20. CAE ANALYSIS OF AUTOMOTIVE LAMP

    OpenAIRE

    Vaibhav Wakchaure*; G.V.R Seshagiri Rao

    2015-01-01

    This Paper work is focused on the different FE analysis performed for the automotive lamps. Front fog lamp is designed according to the mounting position given in the panel and the light output requirement. In this paper different type of CAE analysis performed to qualify the physical test requirement the objective of this analysis is to find the optimum size design of lamp to qualify the test & output as per customer requirement. In this paper Static, vibration & fatigue analysis...

  1. The Quantitative Analysis of Chennai Automotive Industry Cluster

    Science.gov (United States)

    Bhaskaran, Ethirajan

    2016-05-01

    Chennai, also called as Detroit of India due to presence of Automotive Industry producing over 40 % of the India's vehicle and components. During 2001-2002, the Automotive Component Industries (ACI) in Ambattur, Thirumalizai and Thirumudivakkam Industrial Estate, Chennai has faced problems on infrastructure, technology, procurement, production and marketing. The objective is to study the Quantitative Performance of Chennai Automotive Industry Cluster before (2001-2002) and after the CDA (2008-2009). The methodology adopted is collection of primary data from 100 ACI using quantitative questionnaire and analyzing using Correlation Analysis (CA), Regression Analysis (RA), Friedman Test (FMT), and Kruskall Wallis Test (KWT).The CA computed for the different set of variables reveals that there is high degree of relationship between the variables studied. The RA models constructed establish the strong relationship between the dependent variable and a host of independent variables. The models proposed here reveal the approximate relationship in a closer form. KWT proves, there is no significant difference between three locations clusters with respect to: Net Profit, Production Cost, Marketing Costs, Procurement Costs and Gross Output. This supports that each location has contributed for development of automobile component cluster uniformly. The FMT proves, there is no significant difference between industrial units in respect of cost like Production, Infrastructure, Technology, Marketing and Net Profit. To conclude, the Automotive Industries have fully utilized the Physical Infrastructure and Centralised Facilities by adopting CDA and now exporting their products to North America, South America, Europe, Australia, Africa and Asia. The value chain analysis models have been implemented in all the cluster units. This Cluster Development Approach (CDA) model can be implemented in industries of under developed and developing countries for cost reduction and productivity

  2. The Quantitative Analysis of Chennai Automotive Industry Cluster

    Science.gov (United States)

    Bhaskaran, Ethirajan

    2016-07-01

    Chennai, also called as Detroit of India due to presence of Automotive Industry producing over 40 % of the India's vehicle and components. During 2001-2002, the Automotive Component Industries (ACI) in Ambattur, Thirumalizai and Thirumudivakkam Industrial Estate, Chennai has faced problems on infrastructure, technology, procurement, production and marketing. The objective is to study the Quantitative Performance of Chennai Automotive Industry Cluster before (2001-2002) and after the CDA (2008-2009). The methodology adopted is collection of primary data from 100 ACI using quantitative questionnaire and analyzing using Correlation Analysis (CA), Regression Analysis (RA), Friedman Test (FMT), and Kruskall Wallis Test (KWT).The CA computed for the different set of variables reveals that there is high degree of relationship between the variables studied. The RA models constructed establish the strong relationship between the dependent variable and a host of independent variables. The models proposed here reveal the approximate relationship in a closer form. KWT proves, there is no significant difference between three locations clusters with respect to: Net Profit, Production Cost, Marketing Costs, Procurement Costs and Gross Output. This supports that each location has contributed for development of automobile component cluster uniformly. The FMT proves, there is no significant difference between industrial units in respect of cost like Production, Infrastructure, Technology, Marketing and Net Profit. To conclude, the Automotive Industries have fully utilized the Physical Infrastructure and Centralised Facilities by adopting CDA and now exporting their products to North America, South America, Europe, Australia, Africa and Asia. The value chain analysis models have been implemented in all the cluster units. This Cluster Development Approach (CDA) model can be implemented in industries of under developed and developing countries for cost reduction and productivity

  3. Applications of thin coatings in automotive industry

    Directory of Open Access Journals (Sweden)

    P. Louda

    2007-09-01

    Full Text Available Purpose: Use of thin coatings in automotive industry give economic and ecological savings. This is evoke by reducing of weight of used construction elements and currently by increasing of their service life and with that connected elevating of nanomaterials manufacture qualities.Design/methodology/approach: In the paper was disscussed the possibility of applications of thin coating in automotive industry.Findings: The paper shows the examples of thin coatings application in automotive industry.Practical implications: Through the assimilation, improvement, and generation of new technologies, the coating community, as a major supplier to the very large automotive industry, will continue to thrive, grow, and maintain its environmental stewardship in the global marketplace.Originality/value: Applications of thin coatings in automotive industry is and with nanotechnology together will be in centre of interest of automotive industry in near future.

  4. "Oravad" tõmbavad Eesti Energia börsileminekule piduri peale / Raimo Poom

    Index Scriptorium Estoniae

    Poom, Raimo

    2010-01-01

    Riigikogu Reformierakonna fraktsiooni kohtumisest Eesti Energia juhi Sandor Liive ning majandus- ja kommunikatsiooniministeeriumi esindajatega. Fraktsiooni esimees Peep Aru räägib küsimustest, mis on seotud Eesti Energia börsilemineku kavaga

  5. Parts ja Tiivas peavad aega Eesti Energia börsile tulekuks heaks / Jaana Pikalev

    Index Scriptorium Estoniae

    Pikalev, Jaana

    2010-01-01

    Majandus- ja kommunikatsiooniminister Juhan Partsi sõnul tuleks Eesti Energia aktsiat müüa soodustingimustel. East Capital Exploreri juhi Gert Tiivase hinnangul pole paremat aega Eesti Energia börsile toomiseks kui praegu

  6. Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies

    Energy Technology Data Exchange (ETDEWEB)

    David Holloway

    2005-09-30

    Beginning the fall semester of 1999, The University of Maryland, Departments of Mechanical and Electrical Engineering and the Institute for Systems Research served as a U.S. Department of Energy (USDOE) Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies. A key goal was to produce a graduate level education program that educated and prepared students to address the technical challenges of designing and developing hybrid electric vehicles, as they progressed into the workforce. A second goal was to produce research that fostered the advancement of hybrid electric vehicles, their controls, and other related automotive technologies. Participation ended at the University of Maryland after the 2004 fall semester. Four graduate courses were developed and taught during the course of this time, two of which evolved into annually-taught undergraduate courses, namely Vehicle Dynamics and Control Systems Laboratory. Five faculty members from Mechanical Engineering, Electrical Engineering, and the Institute for Systems Research participated. Four Ph.D. degrees (two directly supported and two indirectly supported) and seven Master's degrees in Mechanical Engineering resulted from the research conducted. Research topics included thermoelectric waste heat recovery, fuel cell modeling, pre- and post-transmission hybrid powertrain control and integration, hybrid transmission design, H{sub 2}-doped combustion, and vehicle dynamics. Many of the participating students accepted positions in the automotive industry or government laboratories involved in automotive technology work after graduation. This report discusses the participating faculty, the courses developed and taught, research conducted, the students directly and indirectly supported, and the publication list. Based on this collection of information, the University of Maryland firmly believes that the key goal of the program was met and that the majority of the

  7. Applications of thin coatings in automotive industry

    OpenAIRE

    P. Louda

    2007-01-01

    Purpose: Use of thin coatings in automotive industry give economic and ecological savings. This is evoke by reducing of weight of used construction elements and currently by increasing of their service life and with that connected elevating of nanomaterials manufacture qualities.Design/methodology/approach: In the paper was disscussed the possibility of applications of thin coating in automotive industry.Findings: The paper shows the examples of thin coatings application in automotive industr...

  8. Systems thinking in designing automotive textiles

    OpenAIRE

    Sinha, Pammi; Muthu, Subramanian Senthilkannan; Taylor, Iain; Schulz, Rita; Beverley, Katharine J.; Day, Claire L.; Tipi, Nicoleta S.

    2015-01-01

    We present the complexities in terms of designing automotive exterior seating materials (seat coverings and interior linings) at Sage Automotive Interiors (UK), which is a division of a global international automotive textile supplier with headquarters in the US. Sustainability and innovation are emphasized in documents communicating the company’s vision. Using a case study approach, we consider the current design, development and manufacture process and examine it for the potential for feedb...

  9. Measuring soot particles from automotive exhaust emissions

    Directory of Open Access Journals (Sweden)

    Andres Hanspeter

    2014-01-01

    Full Text Available The European Metrology Research Programme participating countries and the European Union jointly fund a three year project to address the need of the automotive industry for a metrological sound base for exhaust measurements. The collaborative work on particle emissions involves five European National Metrology Institutes, the Tampere University of Technology, the Joint Research Centre for Energy and Transport and the Leibniz Institute for Tropospheric Research. On one hand, a particle number and size standard for soot particles is aimed for. Eventually this will allow the partners to provide accurate and comparable calibrations of measurement instruments for the type approval of Euro 5b and Euro 6 vehicles. Calibration aerosols of combustion particles, silver and graphite proof partially suitable. Yet, a consensus choice together with instrument manufactures is pending as the aerosol choice considerably affects the number concentration measurement. Furthermore, the consortium issued consistent requirements for novel measuring instruments foreseen to replace today’s opacimeters in regulatory periodic emission controls of soot and compared them with European legislative requirements. Four partners are conducting a metrological validation of prototype measurement instruments. The novel instruments base on light scattering, electrical, ionisation chamber and diffusion charging sensors and will be tested at low and high particle concentrations. Results shall allow manufacturers to further improve their instruments to comply with legal requirements.

  10. Vibration reduction on automotive shafts using piezoceramics

    Science.gov (United States)

    Kunze, Holger; Riedel, Mathias; Schmidt, Knut; Bianchini, Emanuele

    2003-08-01

    This paper reports an experimental study on active vibration reduction for automotive shafts with the use of piezoelectric material. The work focuses on an axle of an Audi A2. The demand in the automobile sector for higher comfort in the vehicle is of a great importance alongside the requirements of lighter weight and low fuel consumption. These requirements are typically in conflict with each other. One solution is the use of intelligent materials instead of viscoelastic materials and proof mass absorbers. These solutions are quite heavy especially at low frequencies. Active vibration control and piezoelectric devices are advantageous in this application due to their low mass to performance ratio. Our research study explores the use of such piezoelectric devices for an axle. In conjunction with electronics it will reduce vibrations in the first natural bending mode of the axle. Laboratory tests simulated the condition present in the road. At first a stationary set up was used, then a simulated disturbance was input at the attachment points of the shaft. Finally, a test with rotating shaft was performed. Piezoelectric devices (custom QuickPacks from ACX, a Division of Cymer) were used as sensors and as actuators to properly control the axle during the different operating conditions. The power consumption of each actuator pair was less than 20W. The work described here details the test setup, the control strategy, the hardware implementation as well as the test results obtained.

  11. Adaptive super-twisting observer for estimation of random road excitation profile in automotive suspension systems.

    Science.gov (United States)

    Rath, J J; Veluvolu, K C; Defoort, M

    2014-01-01

    The estimation of road excitation profile is important for evaluation of vehicle stability and vehicle suspension performance for autonomous vehicle control systems. In this work, the nonlinear dynamics of the active automotive system that is excited by the unknown road excitation profile are considered for modeling. To address the issue of estimation of road profile, we develop an adaptive supertwisting observer for state and unknown road profile estimation. Under Lipschitz conditions for the nonlinear functions, the convergence of the estimation error is proven. Simulation results with Ford Fiesta MK2 demonstrate the effectiveness of the proposed observer for state and unknown input estimation for nonlinear active suspension system. PMID:24683321

  12. Smarter–lighter–greener: research innovations for the automotive sector

    Science.gov (United States)

    Bhattacharyya, S. K.

    2015-01-01

    This paper reviews the changing nature of research underpinning the revolution in the automotive sector. Legislation controlling vehicle emissions has brought urgency to research, so we are now noticing a more rapid development of new technologies than at any time in the past century. The light-weighting of structures, the refinement of advanced propulsion systems, the advent of new smart materials, and greater in-vehicle intelligence and connectivity with transport infrastructure all require a fundamental rethink of established technologies used for many decades—defining a range of new multi-disciplinary research challenges. While meeting escalating emission penalties, cars must also fulfil the human desire for speed, reliability, beauty, refinement and elegance, qualities that mark out the truly great automobile. PMID:26345309

  13. International Forum on Advanced Microsystems for Automotive Application

    CERN Document Server

    Meyer, Gereon

    2014-01-01

    The automobile is going through the biggest transformation in its history. Automation and electrification of vehicles are expected to enable safer and cleaner mobility. The prospects and requirements of the future automobile affect innovations in major technology fields like driver assistance systems, vehicle networking and drivetrain development. Smart systems such as adaptive ICT components and MEMS devices, novel network architectures, integrated sensor systems, intelligent interfaces and functional materials form the basis of these features and permit their successful and synergetic integration. It has been the mission of the International Forum on Advanced Microsystems for Automotive Applications (AMAA) for more than fifteen years to detect novel trends and to discuss the technological implications from early on. Therefore, the topic of the AMAA 2014 will be “Smart Systems for Safe, Clean, and Automated Vehicles”. This book contains peer-reviewed papers written by leading engineers and researchers w...

  14. Dynamics of vehicle-road coupled system

    CERN Document Server

    Yang, Shaopu; Li, Shaohua

    2015-01-01

    Vehicle dynamics and road dynamics are usually considered to be two largely independent subjects. In vehicle dynamics, road surface roughness is generally regarded as random excitation of the vehicle, while in road dynamics, the vehicle is generally regarded as a moving load acting on the pavement. This book suggests a new research concept to integrate the vehicle and the road system with the help of a tire model, and establishes a cross-subject research framework dubbed vehicle-pavement coupled system dynamics. In this context, the dynamics of the vehicle, road and the vehicle-road coupled system are investigated by means of theoretical analysis, numerical simulations and field tests. This book will be a valuable resource for university professors, graduate students and engineers majoring in automotive design, mechanical engineering, highway engineering and other related areas. Shaopu Yang is a professor and deputy president of Shijiazhuang Tiedao University, China; Liqun Chen is a professor at Shanghai Univ...

  15. Automotive fuels and internal combustion engines: a chemical perspective.

    Science.gov (United States)

    Wallington, T J; Kaiser, E W; Farrell, J T

    2006-04-01

    Commercial transportation fuels are complex mixtures containing hundreds or thousands of chemical components, whose composition has evolved considerably during the past 100 years. In conjunction with concurrent engine advancements, automotive fuel composition has been fine-tuned to balance efficiency and power demands while minimizing emissions. Pollutant emissions from internal combustion engines (ICE), which arise from non-ideal combustion, have been dramatically reduced in the past four decades. Emissions depend both on the engine operating parameters (e.g. engine temperature, speed, load, A/F ratio, and spark timing) and the fuel. These emissions result from complex processes involving interactions between the fuel and engine parameters. Vehicle emissions are comprised of volatile organic compounds (VOCs), CO, nitrogen oxides (NO(x)), and particulate matter (PM). VOCs and NO(x) form photochemical smog in urban atmospheres, and CO and PM may have adverse health impacts. Engine hardware and operating conditions, after-treatment catalysts, and fuel composition all affect the amount and composition of emissions leaving the vehicle tailpipe. While engine and after-treatment effects are generally larger than fuel effects, engine and after-treatment hardware can require specific fuel properties. Consequently, the best prospects for achieving the highest efficiency and lowest emissions lie with optimizing the entire fuel-engine-after-treatment system. This review provides a chemical perspective on the production, combustion, and environmental aspects of automotive fuels. We hope this review will be of interest to workers in the fields of chemical kinetics, fluid dynamics of reacting flows, atmospheric chemistry, automotive catalysts, fuel science, and governmental regulations. PMID:16565750

  16. Eesti Energia tegi esimesed tehingud elektribörsil / Kerli Nõu

    Index Scriptorium Estoniae

    Nõu, Kerli

    2006-01-01

    Eesti Energia ei avalikusta NordPoolil sõlmitud tehingute mahtu ärisaladuse tõttu. NordPooli börsil hajutavad riske energia tootjad, suurtarbijad ja hulgikauplejad, kes peavad end energia hinnatõusu vastu kaitsma. Järgmise aasta tulevikutehingute hinda mõjutavatest teguritest. Lisa: NordPool

  17. HIL Simulation of Power Electronics and Electric Drives for Automotive Applications

    Directory of Open Access Journals (Sweden)

    Frank Puschmann

    2012-12-01

    Full Text Available Hardware-in-the-loop simulation is today a standard method for testing electronic equipment in the automotive industry. Since electric drives and power electronic devices are more and more important in automotive applications, these kinds of systems have to be integrated into the hardware-in-the-loop simulation. Power converters and electric drives are used in many different applications in vehicles today (hybrid electric or electric powertrain, electric steering systems, DC-DC converters, etc.. The wide range of applications, topologies, and power levels results in various different approaches and solutions for hardware-in-the-loop testing. This paper gives an overview of hardware-in-the-loop simulation of power electronics and electric drives in the automotive industry. The currently available technologies are described and future challenges are outlined.

  18. Development of a solid oxide fuel cell (SOFC) automotive auxiliary power unit (APU) fueled by gasoline

    International Nuclear Information System (INIS)

    This paper describes the design and the development progress of a 3 to 5 auxiliary power unit (APU) based on a gasoline fueled solid oxide fuel cell (SOFC). This fuel cell was supplied reformate gas (reactant) by a partial oxidation (POx) catalytic reformer utilizing liquid gasoline and designed by Delphi Automotive Systems. This reformate gas consists mainly of hydrogen, carbon monoxide and nitrogen and was fed directly in to the SOFC stack without any additional fuel reformer processing. The SOFC stack was developed by Global Thermoelectric and operates around 700oC. This automotive APU produces power to support future 42 volt vehicle electrical architectures and loads. The balance of the APU, designed by Delphi Automotive Systems, employs a packaging and insulation design to facilitate installation and operation on-board automobiles. (author)

  19. Analysis of the potential for new automotive uses of wrought magnesium

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.; Cuenca, R.; Wu, S. [Argonne National Lab., IL (United States); Stodolsky, F. [Argonne National Lab., IL (United States)]|[Argonne National Lab., Washington, DC (United States)

    1996-02-01

    The Center for Transportation Research at Argonne National Laboratory has performed a study for the Lightweight Materials Program within the US Department of Energy`s Office of Transportation Materials to evaluate the suitability of wrought magnesium and its alloys to replace steel or aluminum for automotive structural and sheet applications. Vehicle weight reduction is one of the major means available for improving automotive fuel efficiency. Although high-strength steels, Al, and polymers are already being used to achieve significant weight reductions, substantial additional weight reductions could be achieved by increased use of Mg (whose density is less than one-fourth that of steel and only two-thirds that of Al). This study shows that Mg sheet could be used in automotive body nonstructural and semistructural applications, whereas extrusions could be used in such structural applications as spaceframes. The primary barrier to such uses of wrought Mg is high cost.

  20. 76 FR 51120 - Denial of Motor Vehicle Defect Petition

    Science.gov (United States)

    2011-08-17

    ... National Automotive Sampling System (NASS) has records of a sampling of crashes and an analysis that may... of important aspects to vehicle design. One is the vehicle structure, including crush zones. Another... not always well-founded, or based on any technical analysis. There were 5 reports of non-deployment...

  1. Parametric assessment of climate change impacts of automotive material substitution.

    Science.gov (United States)

    Geyer, Roland

    2008-09-15

    Quantifying the net climate change impact of automotive material substitution is not a trivial task. It requires the assessment of the mass reduction potential of automotive materials, the greenhouse gas (GHG) emissions from their production and recycling, and their impact on GHG emissions from vehicle use. The model presented in this paper is based on life cycle assessment (LCA) and completely parameterized, i.e., its computational structure is separated from the required input data, which is not traditionally done in LCAs. The parameterization increases scientific rigor and transparency of the assessment methodology, facilitates sensitivity and uncertainty analysis of the results, and also makes it possible to compare different studies and explain their disparities. The state of the art of the modeling methodology is reviewed and advanced. Assessment of the GHG emission impacts of material recycling through consequential system expansion shows that our understanding of this issue is still incomplete. This is a critical knowledge gap since a case study shows thatfor materials such as aluminum, the GHG emission impacts of material production and recycling are both of the same size as the use phase savings from vehicle mass reduction. PMID:18853818

  2. Clean generation of electric energy; Generacion limpia de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, Juan M.; Torres, Emmanuel [Centro de Investigacion y de Estudios Avanzados (CINVESTAV), Unidad Guadalajara (Mexico)

    2006-10-15

    This article deals on the existing alternatives of renewable energy for generation of electricity free from polluting sequels within the Mexican territory and presents a global overview on the electricity generation in Mexico. Wind power, hydraulic energy, biomass, photovoltaic and fuel cells are sources of renewable energy that could contribute to Mexico's sustainable development, for this reason it is discussed on the main sources of renewable energy in Mexico - solar and wind energy, mini-hydraulic, biomass and geothermal -, on their development and evolution, cost, insertion projects and obstacles for their correct development in this country. [Spanish] Este articulo versa sobre las alternativas de energia renovable existentes para una generacion de electricidad libre de secuelas contaminantes dentro del territorio mexicano y presenta un panorama global sobre la generacion de electricidad en Mexico. La energia eolica, hidraulica, biomasa, fotovoltaica y las celdas de combustible son fuentes de energia renovable que podrian contribuir al desarrollo sustentable de Mexico, por esto se arguye sobre las principales fuentes de energia renovable en Mexico -energia solar, eolica, minihidraulica, biomasa y geotermia-, sobre su desarrollo y evolucion, costo, proyectos de insercion y obstaculos para su correcto desarrollo en ese pais.

  3. 8th DFO Automotive conference - European automotive coating

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The present CD-ROM of the DFO Conference ''European Automotive Coating'' held on the 14th and 15th May 2001 in Dresden, Germany, contents the following contributions: Contents (1) Plenary Lecture-Car Body Painting in the Digital Factory (2) Off-line painting of a smc Oe tailgate in topcoat colour; (3) Twincure UV - New Concepts for the Surface Treatment of Glass-Fiber-Reinforced; Plastics; (4) New Concepts for Exterior Coating - ''Funktionsschicht 3'' First Experiences and the ''Ludwigsfelde Concept''; (5) Application techniques in the light of new automation concepts in automotive painting; (6) Automatic Management System for Car Body Pretreatment; (7) Surface Inspection on Bodies in White in Automotive Industry; (8) Online Measurement and Control of E-coat Bath Parameters in a Car Body Paint Shop - Development until Maturity for Manufacturing - Practical Experiences; (9) Automated Process Diagnosis; (10) Wavescan DOI Oe Challenge or Data Overkill; (11) Robot Aided Online Metrology for Quality Assurance and Process Control of Coated Surfaces; (12) Physical Simulation of Film Thickness Distribution and Transfer Efficiency in the Electrostatically Supported Painting process; (13) Offline Simulation of the Coating Process with High-Speed Bell and Pneumatic Atomizers; (14) Top coat simulation - First applications and results; (15) Virtual color design. (AKF) (orig.) [German] Die vorliegende zweisprachige (Deutsch/Englisch) CD-ROM der DFO-Tagung ''European Automotive Coating'' vom 14. und 15. Mai 2001 beinhaltet die folgenden Beitraegen: Inhaltsverzeichnis (1) Leitvortrag ''Die Automobillackierung in der digitalen Fabrik''; (2) Off-line Lackierung von SMC-Heckklappen in Decklackfarbe; (3) Hybrid UV-Haertung - Neue Konzepte zur Oberflaechenveredelung von glasfaserverstaerkten Duroplasten; (4) Neue Konzepte fuer die Aussenhautlackierung - Fukntionsschicht 3 - Erste

  4. Advanced hybrid and electric vehicles system optimization and vehicle integration

    CERN Document Server

    2016-01-01

    This contributed volume contains the results of the research program “Agreement for Hybrid and Electric Vehicles”, funded by the International Energy Agency. The topical focus lies on technology options for the system optimization of hybrid and electric vehicle components and drive train configurations which enhance the energy efficiency of the vehicle. The approach to the topic is genuinely interdisciplinary, covering insights from fields. The target audience primarily comprises researchers and industry experts in the field of automotive engineering, but the book may also be beneficial for graduate students.

  5. STUDY ON THE CONCEPT DESIGN PROCESS FOR THE CRASHWORTHINESS IMPROVEMENT OF AN AUTOMOTIVE BODY STRUCTURE USING A KNOWLEDGEBASED DATABASE

    Directory of Open Access Journals (Sweden)

    W. Y. Ki

    2016-04-01

    Full Text Available The purpose of this study is to propose a concept design process for crashworthiness improvement of automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 43 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a statistical technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and crashworthiness was assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness was improved by 15% and 12% respectively compared to an existing body structure. In addition, the weight of the body structure was reduced by 4.2%. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.

  6. A Design Method of Automotive Driving Axle Casing under the Random Load

    Directory of Open Access Journals (Sweden)

    Zheng Yanping

    2013-01-01

    Full Text Available Finite life design of automobile components is an important method for lightening the automotive structure and improving vehicle performances. During driving the most typical vibration is the random vibration caused by the road roughness. In this study, by combining mechanical probabilistic fatigue analytical theory with random vibration theory and using CAD/CAE method, the correct finite element vibration analytical model of automotive driving axle casing was established. Based on the fatigue analysis model, a method of finite life design for the driving axle casing was proposed. According to ISO/TC108/SC2N67 the D grade road surface was taken as an example road in this study. The random dynamic load caused by road roughness and the static load of fully loaded vehicle was taken as the analytical load. Combining the Steinberg three-interval method of finite element analysis with Miner linear cumulative damage rule the fatigue life of driving axle casing was estimated. According tothe compulsive end-of-life standard for motor vehicles in China the finite life of driving axle casing can be designed on account of the vehicle end-of-life mileage which is six hundred thousand kilometers. Study results show that the proposed method is feasible and which will provide references for the finite life design of automotive driving axle casing under the random load from actual road surface.

  7. Electrification of the transportation sector: Is there a need for restructuring the automotive parts suppliers?

    Science.gov (United States)

    Bekaslan, A. Ebru

    The future of the transportation sector has significant implications for the mitigation of climate change through reduced GHG emissions as well as achieving energy efficiency and energy independence. Battery-powered, plug-in, and hybrid electric vehicles are widely seen as the greatest source of a solution. This thesis analyzes the historical development and growth of the automotive industry as well as the restructuring toward the next generation technologies in comparison with the U.S. and China to shed light on the question of how a developing country can structure its strategies to be able to upgrade and be competitive over time. Conventional business models can become obsolete. Companies will find it difficult to maintain their market position unless they gain new perspectives on the outlook of the industry as a whole, and take into account the successful business models of tomorrow. The potential for further growth of the Turkish automotive supplier base particularly in the next generation of automotive technologies is therefore highly dependent on policies and strategies at the national level as much as its dependence on the global strategies of the automotive industry's major players. In this sense, the key questions that motivate this study are whether there are foreseeable technological changes and product-segmentation strategies that could significantly enhance the competitiveness of local Turkish suppliers of automotive components. The thesis builds on the theory of innovative enterprise and evolutionary agglomeration to examine the competitive potential of the Konya Auto Part Suppliers' Cluster in Turkey.

  8. Process Modeling of Low-Pressure Die Casting of Aluminum Alloy Automotive Wheels

    Science.gov (United States)

    Reilly, C.; Duan, J.; Yao, L.; Maijer, D. M.; Cockcroft, S. L.

    2013-09-01

    Although on initial inspection, the aluminum alloy automotive wheel seems to be a relatively simple component to cast based on its shape, further insight reveals that this is not the case. Automotive wheels are in a select group of cast components that have strict specifications for both mechanical and aesthetic characteristics due to their important structural requirements and their visibility on a vehicle. The modern aluminum alloy automotive wheel continues to experience tightened tolerances relating to defects to improve mechanical performance and/or the physical appearance. Automotive aluminum alloy wheels are assessed against three main criteria: wheel cosmetics, mechanical performance, and air tightness. Failure to achieve the required standards in any one of these categories will lead to the wheel either requiring costly repair or being rejected and remelted. Manufacturers are becoming more reliant on computational process modeling as a design tool for the wheel casting process. This article discusses and details examples of the use of computational process modeling as a predictive tool to optimize the casting process from the standpoint of defect minimization with the emphasis on those defects that lead to failure of aluminum automotive wheels, namely, macroporosity, microporosity, and oxide films. The current state of applied computational process modeling and its limitations with regard to wheel casting are discussed.

  9. Sensor Data Fusion in Automotive Applications

    OpenAIRE

    Lytrivis, Panagiotis; Thomaidis, George; Amditis, Angelos

    2009-01-01

    This chapter has summarized the state-of-the-art in sensor data fusion for automotive applications, showing that this is a relatively new discipline in the automotive research area, compared to signal processing, image processing or radar processing. Thus, there is a

  10. 77 FR 37471 - National Automotive Sampling System

    Science.gov (United States)

    2012-06-21

    ... complete Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477-78) or you... National Highway Traffic Safety Administration National Automotive Sampling System AGENCY: National Highway... comments. SUMMARY: The NHTSA is conducting a comprehensive review of the National Automotive...

  11. Using Technology to Enhance an Automotive Program

    Science.gov (United States)

    Ashton, Denis

    2009-01-01

    Denis Ashton uses technology in his automotive technology program at East Valley Institute of Technology (EVIT) to positively impact student outcomes. Ashton, the department chair for the automotive programs at EVIT, in Mesa, Arizona, says that using an interactive PowerPoint curriculum makes learning fun for students and provides immediate…

  12. O espaço da energia nuclear no Brasil

    OpenAIRE

    Joaquim Francisco de Carvalho

    2012-01-01

    Este artigo repassa a história e descreve a experiência acumulada em energia nuclear no Brasil, mostrando que as aplicações biomédicas, industriais e agrícolas desenvolveram-se bem no país, a partir dos anos 1950. Em seguida, o artigo demonstra que o país pode cobrir seu consumo de energia elétrica apenas com fontes renováveis de energia, sem recorrer a usinas nucleares de potência. Por fim, são analisados os argumentos comuns na imprensa, a favor e contrários às centrais nucleares, e são dis...

  13. Standardization for electric energy saving; Normalizacion para el ahorro de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Reyes Diaz, Arturo [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

    1993-12-31

    This work describes shortly the current legislation on the standardization; as well as the participation of the entities Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) and Programa de Ahorro de Energia (PAESE) in the consulting committees, for the elaboration of the Mexican official standards focussed to electric power saving. [Espanol] El presente trabajo, describe brevemente la legislacion actual sobre la normalizacion; asi como la participacion de las entidades Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) y Programa de ahorro de Energia (PAESE) en los comites consultivos, para la elaboracion de normas oficiales mexicanas enfocadas al ahorro de energia electrica.

  14. Storing electricity, the technological challenge of the automotive sector

    International Nuclear Information System (INIS)

    The search for alternatives to the internal combustion engine for motor vehicles may be nothing new, but the present focus on environmental issues (dwindling fossil fuel reserves, growing awareness of the environmental impact of the internal combustion engine, etc.) makes it more topical than ever. It is no coincidence that most manufacturers and OEMs on the automotive market, and many research centers, are studying the use of batteries and fuel cells as a means of developing greener, sustainable transport solutions for the future. The European Union is considering ways of compelling manufacturers to market vehicles that are more fuel-efficient at a time when the members of the European Automobile Manufacturers Association, unlike their counterparts in Japan, are failing to meet the targets defined in voluntary agreements. Through their sales of hybrid vehicles, Japanese manufacturers have lent credibility to the notion of a market for electrified vehicles. In this way, market constraints (environmental impact of the internal combustion engine, the cost of fossil fuel, consumers, and national or European lawmakers) will push the automotive industry into marketing 'low-carbon' vehicles in the very short term. Manufacturers' product plans reveal that a wave of electrified products can be expected on the market in 2015. That implies a significant R and D effort between now and 2012, with demonstrator vehicles up and running by 2013-2014 at the latest. So now is a crucial time for research organisations to position themselves in preparation for this emerging market. Industry is hoping for technological progress in areas that cut across these varying degrees of hybridisation and electrification, namely the storage and management of electrical energy and power electronics. It is these areas that will be at the heart of research programs. In these highly competitive times, efforts should focus on: - Lowering costs (by a factor of 5 to 10 for fuel cells and 2 to 4 for

  15. An object oriented data model for vehicle dynamics problems

    OpenAIRE

    Schiehlen, Werner

    1993-01-01

    The design of automotive systems using computer codes for vehicle dynamics problems features cost reduction and quality enhancement. This paper presents two basic approaches. The first approach deals with the application of CAD data bases to the evaluation of input data for multibody system formalisms, most adequate for automotive system modelling. An object oriented data model for multibody systems is presented. The second approach covers the development of an integrated simulation tool for ...

  16. [Fuel substitution of vehicles by natural gas: Summaries of four final technical reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This report contains summary information on three meetings and highlights of a fourth meeting held by the Society of Automotive Engineers on natural gas fueled vehicles. The meetings covered the following: Natural gas engine and vehicle technology; Safety aspects of alternately fueled vehicles; Catalysts and emission control--Meeting the legislative standards; and LNG--Strengthening the links.

  17. Renewable energy and technological development; Energia renovable y desarrollo tecnologico

    Energy Technology Data Exchange (ETDEWEB)

    Covarrubias Ramos, Rogelio [Fideicomiso para el ahorro de energia, (Mexico)

    2007-06-15

    In this presentation is widely described the work carried out by the Trust Fund for Electrical Energy Savings (FIDE) with reference to renewable energy foster. In the first part, it is found the FIDE's mission, which is focused on achieving the efficient use of the energy. Then, there are quiet briefly described the processes -carried out by the FIDE- in favour of the groundbreaking technology that achieves to decrease the energy squandering. In addition, there are mentioned different means boosting the energy savings. Then, there are described the issues the energy system should change in order to improve the actual situation of many Mexicans. There are briefly mentioned not only the environmental but also the social benefits of the use of renewable energy; besides, there are given the necessary elements in order to make it possible. Then, there are explained why the use of renewable energy would be profitable. Finally, it is described the methodology that should be followed in case it is wanted to find sponsors up to 100% for a project related to improvement of the energy production. [Spanish] Esta presentacion describe ampliamente la labor que realiza el Fideicomiso para el ahorro de energia (FIDE) en relacion con el fomento de la energia renovable, asi como el desarrollo de tecnologias que refuercen el uso de este tipo de energia. En la primera parte, se encuentra la mision del FIDE, que se enfoca en lograr que el uso de la energia sea apropiado. Enseguida, de forma breve se describen los procesos que realiza el FIDE en favor de la tecnologia innovadora que haga decrecer el dispendio de energia. Luego, se explican las aspectos endebles del sistema energetico de Mexico. Se describen escuetamente los beneficios, no solo ambientales sino tambien sociales, del uso de energia renovable; ademas, se mencionan los elementos necesarios para que esto pueda lograrse. Mas adelante, se dan las razones por las que para Mexico seria rentable el uso de energia renovable

  18. How the systems approach is determining automotive battery design and use

    Science.gov (United States)

    Bonnet, Jean; Stephany, Jean-Marie; Sheppelman, Todd

    Today, the battery in a vehicle system is specific and designed as a single, stand-alone vehicle product. Traditionally, customer specifications were the driving force behind battery design and application requirements. This method is not able to comprehend the fluctuating requirements of real-time, vehicle systems. Growing competition in the automotive market is increasing customer needs and expectations in regards to cost, weight, size efficiency, time-to-market, and quality of the products and systems. System engineering is a service that Delco Remy, as an electrical power system supplier, offers to help their customers secure gains in the market place. System development and application engineering is essential for the development of performance-optimized components that meet the systems and total vehicle cost, reliability and timing objectives. The battery integration must be managed through the electrical power system during the complete vehicle development process in order to increase ultimately customer satisfaction.

  19. Mileage efficiency and relative emission of automotive vehicles

    CERN Document Server

    Patankar, Neelesh A

    2015-01-01

    Physics dictates that cars with small mass will travel more miles per gallon (mpg) compared to massive trucks. Does this imply that small cars are more efficient machines? In this work a mileage efficiency metric is defined as a ratio of actual car mileage (mpg) to the mileage of an ideal car. This metric allows comparison of efficiencies of cars with different masses and fuel types. It is as useful to quantify efficiencies of cars as the concept of drag coefficient is to quantify the efficacy of their aerodynamic shapes. Maximum mileage and lowest CO2 emission of conventional gasoline cars, at different driving schedules, is reported based on the concept of an ideal car. This can help put government imposed standards in a rigorous context.

  20. Electric and Hybrid Vehicles With Two Prime Movers

    OpenAIRE

    Altieri, Leonardo

    2013-01-01

    The importance of reducing emissions and energy consumption of the vehicles for individual mobility is continuously growing, particularly considering the increasingly chaotic urban context. Therefore the importance of reducing fuel consumption in automotive field is and will be a key factor of the development of the future vehicles. To achieve this target, full-electric and hybrid-electric vehicles start to be adopted and probably will be strongly developed in the next future. Furthermore, th...

  1. Connecting the Vehicle with the Environment - Trends and Challenges

    OpenAIRE

    de Boer, Gerrit; Vogel, Peter

    2005-01-01

    Innovations in automotive electronics have become increasingly complex, resulting in high-end vehicles containing more than 70 electronic control units and offering a variety of functions to the driver. In-vehicle telematics and infotainment systems provide services like digital radio, broadcast services, television, and MP3 audio. Future applications and services will integrate information sources available outside and inside the car, requiring vehicle systems connected wit...

  2. Natural gas vehicles in Europe: Commercialization prospects

    International Nuclear Information System (INIS)

    This paper tables numerous statistical data to evidence that whereas the use of natural gas as an automotive fuel for private and public vehicles is growing in Asia, North and South America, in Europe this trend is currently being followed only in Italy. However, with the relatively recent expansion of the European Communities' natural gas distribution network, coupled with growing interest in this fuel as a cost effective and environmentally compatible alternative to petroleum, the demand for natural gas automotive fuels is expected to increase even in this continent. The trucking industry in particular should derive significant benefits from the switch to natural gas

  3. Computerized Simulation of Automotive Air-Conditioning System: Development of Mathematical Model and Its Validation

    OpenAIRE

    Haslinda Mohamed Kamar; Mohd Yusoff Senawi; Nazri Kamsah

    2012-01-01

    A semi-empirical model for simulating thermal and energy performance of an automotive air-conditioning (AAC) system in passenger vehicles has been developed. The model consists of two sections, namely empirical evaporator correlations and dynamic load simulation. The correlations used consider sensible and latent heat transfer performance of the evaporator coil. The correlations were obtained from the experimental data of actual air conditioning system for a compact size passenger car. The se...

  4. A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure

    OpenAIRE

    Celalettin Yuce; Fatih Karpat; Nurettin Yavuz; Gökhan Sendeniz

    2014-01-01

    Recently, sustainability has been a growing concern for many industries and especially for the transportation sector due to it being the second largest energy consumer and largest contributor of anthropogenic greenhouse gas emissions within the European Union. New legal restrictions on the emission rates have forced the automotive sector to examine different fuel-efficient technologies. Vehicle weight reduction is one of the most important methods of improving fuel efficiency and reducing CO ...

  5. Decision aid tool and design approach for plastic recycling chain integration in the automotive industry

    OpenAIRE

    MAUDET-CHARBUILLET, Carole; Bertoluci, Gwenola

    2007-01-01

    The many uses of plastics in our society are now compromised because of the social and environmental impacts they generate: exhaustion of petroleum resources, waste management... Plastics recycling appears to be one of the best ways to solve these problems. But Plastics Recycling Chains (PRC) are still emerging system. The automotive industry is directly concerned by plastic recycling through the End of Life Vehicles (ELV) directive which compels it to respect recycling rate for their product...

  6. NEMO-enabled localized mobility support for internet access in automotive scenarios

    OpenAIRE

    Soto I.; Bernardos C.J.; Calderon M.; Banchs A.; Azcorra A.

    2009-01-01

    This article surveys the major existing approaches and proposes a novel architecture to support mobile networks in network-based, localized mobility domains. Our architecture enables conventional terminals without mobility support to obtain connectivity either from fixed locations or mobile platforms (e.g., vehicles) and move between them, while keeping their ongoing sessions. This functionality offers broadband Internet access in automotive scenarios such as public transportation systems, wh...

  7. Review of Italian experience on automotive shredder residue characterization and management

    OpenAIRE

    Fiore, Silvia; Ruffino, Barbara; Zanetti, Mariachiara

    2014-01-01

    Automotive Shredder Residue (ASR) can be classified as either hazardous or non hazardous waste. However both the strict regulation concerning landfills and the EU targets related to End-of-Life Vehicles (ELVs) Recovery and Recycling rate to achieve by 2015 (Directive 2000/53/EC), will limit current landfilling practice and will impose an increased efficiency of ELVs valorization. The present paper considers the ELVs context in Italy, taking into account ASRs physic-chemical features and curre...

  8. Innovative connectivity for double side cooling and connection of power dice in the context of automotive power mechatronic packaging for high power inverters

    OpenAIRE

    L. Dupont; Coquery, G.; CELNIKIER, Y; MORELLE, JM

    2009-01-01

    Today, the automotive industry is facing important challenges drawn by fuel shortage and the need for more environment friendly vehicles. In this context, the hybrid vehicle market is now growing rapidly for small city cars without neglecting full-size cars. In parallel, all OEMs and tier-ones are developing programs about full electrical vehicles. These new developments are going together with the need for power electronics inverters and converters that are small in size with very high power...

  9. Batteries for Electric Vehicles and Hybrid Electric Vehicles - State of the art - Perspectives

    OpenAIRE

    PELISSIER, Serge

    2012-01-01

    Batteries are often considered to be the main obstacle in the diffusion of Hybrid Electric and Electric Vehicles. Indeed autonomy and lifetime of the vehicle are key points that depend directly on the batteries. Many recent developments have deeply modified their characteristics. Lithium batteries are often considered as the solution for energy storage in automotive applications but actually there is a large variety in the lithium batteries family. Even if published results periodically annou...

  10. Energia avastuskeskus = Energy discovery center / Margit Aule ; kommenteerinud Kristiina Raid

    Index Scriptorium Estoniae

    Aule, Margit, 1981-

    2015-01-01

    Energia avastuskeskuse (Põhja pst 29/31, Tallinn) interjöörist ja ekspositsiooni kujundusest. Autor Margit Argus (KAOS Arhitektid); ekspositsiooni kujundus Margit Argus, Margit Aule; arhitektid Sander Aas, Margit Aule, Pelle Sten Viiburg (KAOS Arhitektid). Eesti Sisearhitektide Liidu aastapreemia 2014/2015 parima ajaloolise interjööri eest

  11. Eesti Energia salajased uuringud / Sulev Vedler, Tarmo Vahter

    Index Scriptorium Estoniae

    Vedler, Sulev, 1970-

    2007-01-01

    Ilmunud ka: Infopress 2. märts nr. 9 lk. 160. Hoitakse salajas Briti konsultatsioonifirma Lexicon Partners poolt koostatud uuringut, mida peaks Eesti riik peale hakkama oma osalusega monopoolses elektriettevõttes Eesti Energia. Majandusminister Edgar Savisaar lasi uuringu ministeeriumisse tuua ning andis juristidele ülesande analüüsida, kui palju saab dokumendist avaldada. Vt. samas: Elektri hind

  12. BALANÇO DE ENERGIA EM UMA CULTURA DE MILHETO

    Directory of Open Access Journals (Sweden)

    Sandro Luis Petter Medeiros

    1993-04-01

    Full Text Available Em uma cultua de milheto forrageiro (Pennisetum americanum, Leek cv. pérola, em Eldorado do Sul, com coordenadas de 30°05'22"S e 51°40'18"W e 40m de altitude, foram determinados os componentes do balanço de energia na ano agrícola de 1988/89. O fluxo de calor latente de evaporação utilizou a maior porção da energia disponível no sistema, sendo uma função direta da disponibilidade hídrica no solo. O fluxo de calor sensível foi o segundo termo no consumo de energia disponível, variando segundo uma função inversa da disponibilidade hídrica. O fluxo de calor no solo variou inversamente ao índice de área foliar, utilizando a menor fração do saldo de radiação. Em geral, os fluxos de calor sensível no ar e no solo foram positivos somente nas primeiras horas da manhã e ao final da tarde. Em alguns horários houve aporte de energia por advecção, invertendo o gradiente térmico vertical do ar e incrementando o fluxo de calor latente de evaporação.

  13. Qualidade da energia eléctrica : casos reais

    OpenAIRE

    Afonso, João L.; Sousa, Tiago N.; Pregitzer, Ricardo G.; Júlio S Martins

    2005-01-01

    Este artigo relata e analisa alguns exemplos de casos reais de problemas de qualidade de energia eléctrica observados em diferentes instalações eléctricas. São ainda apontadas soluções para cada um dos casos.

  14. Konverents "Turg. Tööstus. Energia." / T Tiidemann

    Index Scriptorium Estoniae

    Tiidemann, T

    1993-01-01

    Rootsi organisatsioon SWENESCO (Swedish Network of Engineers and Seientists for Conversion - Rootsi inseneride ja teadlaste võrk konversiooni eest) korraldab konverentsi praktilistest kogemustest Rootsi - Eesti tööstuse ja energia tehnikaalastes projektides 18-20 juuni 1993 Pirita Purjespordikeskuses

  15. Electrohydraulic Forming of Near-Net Shape Automotive Panels

    Energy Technology Data Exchange (ETDEWEB)

    Golovaschenko, Sergey F.

    2013-09-26

    The objective of this project was to develop the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures. Pulsed pressure is created via a shockwave generated by the discharge of high voltage capacitors through a pair of electrodes in a liquid-filled chamber. The shockwave in the liquid initiated by the expansion of the plasma channel formed between two electrodes propagates towards the blank and causes the blank to be deformed into a one-sided die cavity. The numerical model of the EHF process was validated experimentally and was successfully applied to the design of the electrode system and to a multi-electrode EHF chamber for full scale validation of the process. The numerical model was able to predict stresses in the dies during pulsed forming and was validated by the experimental study of the die insert failure mode for corner filling operations. The electrohydraulic forming process and its major subsystems, including durable electrodes, an EHF chamber, a water/air management system, a pulse generator and integrated process controls, were validated to be capable to operate in a fully automated, computer controlled mode for forming of a portion of a full-scale sheet metal component in laboratory conditions. Additionally, the novel processes of electrohydraulic trimming and electrohydraulic calibration were demonstrated at a reduced-scale component level. Furthermore, a hybrid process combining conventional stamping with EHF was demonstrated as a laboratory process for a full-scale automotive panel formed out of AHSS material. The economic feasibility of the developed EHF processes was defined by developing a cost model of the EHF process in comparison to the conventional stamping process.

  16. Green innovation adoption in automotive supply chain

    DEFF Research Database (Denmark)

    Zailani, Suhaiza; Govindan, Kannan; Iranmanesh, Mohammad;

    2015-01-01

    Green innovation has currently been receiving a great deal of international attention because of the growing concern of consumers, governments, and the community as a whole with regard to the degradation of natural resources and environmental pollution. The automotive sector is one of the leading...... generators of industrial waste that affect the quality of the natural environment. This study aims to investigate the determinants of green innovation adoption and its effect on firm performance. Data were gathered by surveying 153 firms in the Malaysian automotive supply chain industry. Data were analyzed......). These results have important implications for designing strategic plans for the Malaysian automotive industry....

  17. Compact Hybrid Automotive Propulsion System

    Science.gov (United States)

    Lupo, G.

    1986-01-01

    Power train proposed for experimental vehicle powered by internal combustion engine and electric motor. Intended for front-wheel drive automobile, power train mass produced using existing technology. System includes internal-combustion engine, electric motor, continuously variable transmission, torque converter, differential, and control and adjustment systems for electric motor and transmission. Continuously variable transmission integrated into hydraulic system that also handles power steering and power brakes. Batteries for electric motor mounted elsewhere in vehicle.

  18. A materials selection procedure for sandwiched beams via parametric optimization with applications in automotive industry

    International Nuclear Information System (INIS)

    Highlights: • Sandwich panels optimization model. • Sandwich panels design procedure. • Study of sandwich panels for automotive vehicle flooring. • Study of sandwich panels for truck cabin exterior. - Abstract: The future of automotive industry faces many challenges in meeting increasingly strict restrictions on emissions, energy usage and recyclability of components alongside the need to maintain cost competiveness. Weight reduction through innovative design of components and proper material selection can have profound impact towards attaining such goals since most of the lifecycle energy usage occurs during the operation phase of a vehicle. In electric and hybrid vehicles, weight reduction has another important effect of extending the electric mode driving range between stops or gasoline mode. This paper adopts parametric models for design optimization and material selection of sandwich panels with the objective of weight and cost minimization subject to structural integrity constraints such as strength, stiffness and buckling resistance. The proposed design procedure employs a pre-compiled library of candidate sandwich panel material combinations, for which optimization of the layered thicknesses is conducted and the best one is reported. Example demonstration studies from the automotive industry are presented for the replacement of Aluminum and Steel panels with polypropylene-filled sandwich panel alternatives

  19. Evaluation of the Benefits Attributable to Automotive Lighweight Materials Program Research and Development Projects

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.

    2002-01-11

    The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The program focuses on the development and validation of advanced lightweight materials technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The work supports the goals of the Partnership for a New Generation of Vehicles (PNGV). Up to thirty percent of the improvement required to meet the PNGV goal of tripling vehicle fuel economy and much of its cost, safety, and recyclability goal depend on the lightweight materials. Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers.

  20. Long-term strategies for increased recycling of automotive aluminum and its alloying elements.

    Science.gov (United States)

    Løvik, Amund N; Modaresi, Roja; Müller, Daniel B

    2014-04-15

    Aluminum recycling currently occurs in a cascading fashion, where some alloys, used in a limited number of applications, absorb most of the end-of-life scrap. An expected increase in scrap supply in coming decades necessitates restructuring of the aluminum cycle to open up new recycling paths for alloys and avoid a potential scrap surplus. This paper explores various interventions in end-of-life management and recycling of automotive aluminum, using a dynamic substance flow analysis model of aluminum and its alloying elements with resolution on component and alloy level (vehicle-component-alloy-element model). It was found that increased component dismantling before vehicle shredding can be an effective, so far underestimated, intervention in the medium term, especially if combined with development of safety-relevant components such as wheels from secondary material. In the long term, automatic alloy sorting technologies are most likely required, but could at the same time reduce the need for magnesium removal in refining. Cooperation between the primary and secondary aluminum industries, the automotive industry, and end-of-life vehicle dismantlers is therefore essential to ensure continued recycling of automotive aluminum and its alloying elements. PMID:24655476

  1. Technology Transfer in the Global Automotive Value Chain. Lessons from the Turkish Automotive Industry

    OpenAIRE

    M. Teoman Pamukçu; Alper Sönmez

    2011-01-01

    The automotive industry is one of the main contributors to value added, employment and exports of the Turkish economy and it has undergone major changes since the mid-nineties. Most of the automotive manufacturers in Turkey are either joint ventures or wholly-owned affiliates of multinational companies. Literature on global value chains point to the possibility of technology transfer occurring through backward linkages from automotive manufacturers to their suppliers. We test for the existenc...

  2. Does Automotive Service Excellence (ASE) Certification Enhance Job Performance of Automotive Service Technicians?

    OpenAIRE

    Kolo, Emmanuel

    2006-01-01

    The purpose of this study was to determine if Automotive Service Excellence (ASE) certification of automotive service technicians in independent dealerships enhanced job performance. Descriptive survey methodology was used to gather information for 100 automotive technicians (50 ASE-certified and 50 non-certified technicians) located in 50 different work sites. Each siteâ s service manager was asked to complete a questionnaire and a rating scale for two technicians, one ASE certified and on...

  3. Parametric studies on automotive radiators

    International Nuclear Information System (INIS)

    This paper presents a set of parametric studies performed on automotive radiators by means of a detailed rating and design heat exchanger model developed by the authors. This numerical tool has been previously verified and validated using a wide experimental data bank. A first part of the analysis focuses on the influence of working conditions on both fluids (mass flows, inlet temperatures) and the impact of the selected coolant fluid. Following these studies, the influence of some geometrical parameters is analysed (fin pitch, louver angle) as well as the importance of coolant flow lay-out on the radiator global performance. This work provides an overall behaviour report of automobile radiators working at usual range of operating conditions, while significant knowledge-based design conclusions have also been reported. The results show the utility of this numerical model as a rating and design tool for heat exchangers manufacturers, being a reasonable compromise between classic ε - NTU methods and CFD

  4. Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting

    Energy Technology Data Exchange (ETDEWEB)

    Mascarin, Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hannibal, Ted [Idaho National Lab. (INL), Idaho Falls, ID (United States); Raghunathan, Anand [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ivanic, Ziga [Idaho National Lab. (INL), Idaho Falls, ID (United States); Francfort, James [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. The strategic targets were a 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. The baseline vehicle was an average of several available vehicles in this class. Mass and cost breakdowns from several sources were used, including original equipment manufacturers’ (OEMs’) input through U.S. Department of Energy’s Vehicle Technologies Office programs and public presentations, A2Mac1 LLC’s teardown information, Lotus Engineering Limited and FEV, Inc. breakdowns in their respective lightweighting studies, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses. Information on lightweighting strategies in this analysis came from these same sources and the ongoing U.S. Department of Energy-funded Vehma International of America, Inc. /Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, and many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs.

  5. Direct Injection Compression Ignition Diesel Automotive Technology Education GATE Program

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Carl L

    2006-09-25

    The underlying goal of this prqject was to provide multi-disciplinary engineering training for graduate students in the area of internal combustion engines, specifically in direct injection compression ignition engines. The program was designed to educate highly qualified engineers and scientists that will seek to overcome teclmological barriers preventing the development and production of cost-effective high-efficiency vehicles for the U.S. market. Fu1iher, these highly qualified engineers and scientists will foster an educational process to train a future workforce of automotive engineering professionals who are knowledgeable about and have experience in developing and commercializing critical advanced automotive teclmologies. Eight objectives were defmed to accomplish this goal: 1. Develop an interdisciplinary internal co1nbustion engine curriculum emphasizing direct injected combustion ignited diesel engines. 2. Encourage and promote interdisciplinary interaction of the faculty. 3. Offer a Ph.D. degree in internal combustion engines based upon an interdisciplinary cuniculum. 4. Promote strong interaction with indusuy, develop a sense of responsibility with industry and pursue a self sustaining program. 5. Establish collaborative arrangements and network universities active in internal combustion engine study. 6. Further Enhance a First Class educational facility. 7. Establish 'off-campus' M.S. and Ph.D. engine programs of study at various indusuial sites. 8. Extend and Enhance the Graduate Experience.

  6. Damage tolerance reliability analysis of automotive spot-welded joints

    Energy Technology Data Exchange (ETDEWEB)

    Mahadevan, Sankaran; Ni Kan

    2003-07-01

    This paper develops a damage tolerance reliability analysis methodology for automotive spot-welded joints under multi-axial and variable amplitude loading history. The total fatigue life of a spot weld is divided into two parts, crack initiation and crack propagation. The multi-axial loading history is obtained from transient response finite element analysis of a vehicle model. A three-dimensional finite element model of a simplified joint with four spot welds is developed for static stress/strain analysis. A probabilistic Miner's rule is combined with a randomized strain-life curve family and the stress/strain analysis result to develop a strain-based probabilistic fatigue crack initiation life prediction for spot welds. Afterwards, the fatigue crack inside the base material sheet is modeled as a surface crack. Then a probabilistic crack growth model is combined with the stress analysis result to develop a probabilistic fatigue crack growth life prediction for spot welds. Both methods are implemented with MSC/NASTRAN and MSC/FATIGUE software, and are useful for reliability assessment of automotive spot-welded joints against fatigue and fracture.

  7. Measurement of Soot Deposition in Automotive Components Using Neutron Radiography

    International Nuclear Information System (INIS)

    About 40% of air pollution is generated by vehicles and transportation. The particulate matter (PM) emission significantly impacts human health. Fine particles below 2.5 μm (PM2.5) can enter the lungs and lead to respiratory problems. These particles not only influence human health, but also reduce the capability of many automobile exhaust heat exchanging devices. Neutron radiography is a non-destructive method of analyzing carbonaceous PM. While neutron radiography has been demonstrated for soot measurement in the past, the application has not considered the presence of unburned hydrocarbons, significant amounts of moisture nor examined complex geometrical configurations. The purpose of this work is to study a reliable non-destructive testing methodology using neutron radiography for measurement of soot distribution in automotive components. A soot standard (aluminium target) was designed and manufactured as a calibration tool. The standard is radiographed and used to measure the differences between various soot thickness and compositions. The radiograph images are analyzed to determine a calibration curve based upon the composition of the materials which can then be used for analysis of the automotive components. Experiments are performed using a diesel engine to produce soot deposits on exhaust piping. Soot distribution on exhaust piping is measured using neutron radiography. (authors)

  8. Release rates and environmental impact of zinc-nickel coatings in the automotive industry

    OpenAIRE

    Åslund, Johan

    2006-01-01

    At present the automotive industry is due to an EU directive, replacing hexavalent chrome on vehicles. This is an extensive job as hexavalent chrome is used all over the vehicle and to large extent on fasteners (screws, nuts, rivets etc.). Chrome (VI) is used as a passivating layer on mainly zinc-iron. When replacing the hexavalent chrome with a chrome (VI) free product, the passivating properties are reduced. One of the alternatives is to replace the zinc-iron coating with a zinc-nickel coat...

  9. Sustainable automotive energy system in China

    CERN Document Server

    CAERC, Tsinghua University

    2014-01-01

    This book identifies and addresses key issues of automotive energy in China. It covers demography, economics, technology and policy, providing a broad perspective to aid in the planning of sustainable road transport in China.

  10. Super High Strength Steel for automotive applications

    OpenAIRE

    CONFENTE, Mario; SCHNEIDER, Emmanuel; BOMONT, Olivier; LESCALIER, Christophe; BOMONT-ARZUR, Anne

    2008-01-01

    Intensive weight savings and out-sizing programs are developed in automotive industry and lead to increase the mechanical properties of the material of the automotive parts. ArcelorMittal has developed specific steel grades known as Super High Strength Steels which are designed for both high ductility and toughness and fatigue resistance. This paper investigates machinability for a drilling operation using an experimental methodology. One of the materials is a new low bainitic steel grade. Ex...

  11. Virtual Tryout Technologies for Preparing Automotive Manufacturing

    OpenAIRE

    Takahashi, Susumu

    2012-01-01

    It is important to reduce the weight of the automotive and to shorten the development period for reduction of CO2 discharge. For these purpose, virtual tryout technologies have been introduced automotive industry. Every process from stamping to assembly for car development has introduced CAD design and numerical simulation such as forming simulation, dimensional accuracy simulation such as forming simulation, dimensional accuracy simulation and so on. In this paper, sheet metal forming simula...

  12. Automotive perspective on laser material processing

    International Nuclear Information System (INIS)

    In this paper a broad review is given of the development and use of laser processing in the automotive industry. a brief introduction to the major types of processing lasers and related systems is followed by a summary of the major processing regimes. Examples are given of the automotive industry's use of lasers in a variety of applications, from heat treating and welding, to cutting and marking

  13. Multidisciplinary Design Optimization of Automotive Structures

    OpenAIRE

    Domeij Bäckryd, Rebecka

    2013-01-01

    Multidisciplinary design optimization (MDO) can be used as an effective tool to improve the design of automotive structures. Large-scale MDO problems typically involve several groups who must work concurrently and autonomously for reasons of efficiency. When performing MDO, a large number of designs need to be rated. Detailed simulation models used to assess automotive design proposals are often computationally expensive to evaluate. A useful MDO process must distribute work to the groups inv...

  14. INFLUENCE OF AUTOMOTIVE CLUSTERS IN REGIONAL DEVELOPMENT

    OpenAIRE

    Constantin BORDEI

    2014-01-01

    This paper proposes an overview of the evolution in the automotive sector in the process of regional development. The fundamental changes made by the component supplier sector improved the regional development and manufacturing process. Automotive industry is one of the modern sectors in many countries that benefits of a high technology impact and creates jobs that reduces unemployment across Europe. The auto industry changed cities, regions and countries into poles of development and it beco...

  15. Operationalising luxury in the premium automotive industry

    OpenAIRE

    Bridle, Bernadette

    2010-01-01

    This thesis presents an Action Research project investigating the use of customers’ perceptions of premium and luxury cars within the premium automotive industry. The research was sponsored by Jaguar Land Rover (JLR), a UK-based automotive manufacturer. An inductive, phenomenological approach was adopted in which JLR’s Premiumness Research Programme (PRP) was used as a case study to build an understanding of the consumer’s perception of luxury, to discover how to communic...

  16. Comparative Advantage in the Asian Automotive Industry

    OpenAIRE

    Somsupa Nopprach

    2010-01-01

    This paper seeks to analyze determinants of Asian countries' comparative advantage in the automotive industry. The effects of supporting industries, factor availability, factor intensity, transportation costs, and of the scale of foreign investment in the industry on the level of countries' comparative advantage are on focus. The results highlight the importance of strong supporting industries in raising a country's comparative advantage in the automotive industry. Furthermore, it is found th...

  17. Design and development of an automotive propulsion system utilizing a Rankine cycle engine (water based fluid). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Demler, R.L.

    1977-09-01

    Under EPA and ERDA sponsorship, SES successfully designed, fabricated and tested the first federally sponsored steam powered automobile. The automobile - referred to as the simulator - is a 1975 Dodge Monaco standard size passenger car with the SES preprototype Rankine cycle automotive propulsion system mounted in the engine compartment. In the latter half of 1975, the simulator successfully underwent test operations at the facilities of SES in Watertown, Massachusetts and demonstrated emission levels below those of the stringent federally established automotive requirements originally set for implementation by 1976. The demonstration was accomplished during testing over the Federal Driving Cycle on a Clayton chassis dynamometer. The design and performance of the vehicle are described.

  18. Applications of nuclear methods in the automotive industry

    International Nuclear Information System (INIS)

    Over the years nuclear methods have proved to be a valuable asset to industry in general and to the automotive industry in particular. This paper summarizes some of the most important recent contributions of nuclear technology to the development of vehicles having high quality and long-term durability. Radiotracer methods are used to measure engine oil consumption and the wear rates of inaccessible components. Radiographic and tomographic methods are used to image fluids and structures in engines and accessory components. Tracers are used to understand combustion chemistry and quantify fluid flow. Gauging methods are used for inspection and process control. Nuclear analytical methods are used routinely for materials characterization and problem solving. Although nuclear methods are usually considered as the means of last resort, they can often be applied more easily and quickly than conventional methods when those in industrial engineering and R and D are aware of their unique capabilities. (author). 51 refs., 5 figs

  19. Developing a composite based elliptic spring for automotive applications

    International Nuclear Information System (INIS)

    An automotive suspension system is designed to provide both safety and comfort for the vehicle occupants. In this study, finite element models were developed to optimize the material and geometry of the composite elliptical spring based on the spring rate, log life and shear stress parameters. The influence of the ellipticity ratio on the performance of woven roving-wrapped composite elliptical springs was investigated both experimentally and numerically. The study demonstrated that composite elliptical springs can be used for light and heavy trucks with substantial weight reduction. The results showed that the ellipticity ratio significantly influenced the design parameters. Composite elliptic springs with ellipticity ratios of a/b = 2 had the optimum spring parameters.

  20. Automotive fuels from biomass via gasification

    International Nuclear Information System (INIS)

    There exists already a market of bio-automotive fuels i.e. bioethanol and biodiesel produced from food crops in many countries. From the viewpoint of economics, environment, land use, water use and chemical fertilizer use, however, there is a strong preference for the use of woody biomass and various forest/agricultural residues as the feedstock. Thus, the production of 2nd generation of bio-automotive fuels i.e. synthetic fuels such as methanol, ethanol, DME, FT-diesel, SNG and hydrogen through biomass gasification seems promising. The technology of producing synthetic fuels is well established based on fossil fuels. For biomass, however, it is fairly new and the technology is under development. Starting from the present market of the 1st generation bio-automotive fuels, this paper is trying to review the technology development of the 2nd generation bio-automotive fuels from syngas platform. The production of syngas is emphasized which suggests appropriate gasifier design for a high quality syngas production. A number of bio-automotive fuel demonstration plant will be presented, which gives the state of the art in the development of BTS (biomass to synthetic fuels) technologies. It can be concluded that the 2nd generation bio-automotive fuels are on the way to a breakthrough in the transport markets of industrial countries especially for those countries with a strong forest industry. (author)

  1. Automotive Fuels Survey. Part 2. Distribution and use

    Energy Technology Data Exchange (ETDEWEB)

    Van Walwijk, M.; Bueckmann, M.; Troelstra, W.P.; Achten, P.A.J. [eds.

    1996-12-01

    The purpose of the title survey is to present an overview of important aspects of the distribution and vehicle use of conventional and alternative automotive fuels. In combination with Part 1 (Raw materials and conversion) it considers the complete well to wheel chain of various fuels. Part 3 (to be published in 1998) will present a direct comparison of the well to wheel chains of the various fuels under consideration. In this part of the IEA/AFIS Annual Report the most important conclusions of the survey are presented for each individual fuel: gasoline and diesel oil, LPG, natural gas, alcohol fuels, vegetable oils and biodiesels, hydrogen and dimethyl ether (DME). After a general introduction, fuel composition and fuel properties are discussed, Next, the fuel chain from the fuel leaving the production plant up to and including vehicle use is described (distribution, refuelling and on-board storage). Subsequently attention is paid to fuel mixtures and legislation. Finally, data on energy consumption, emissions and costs are presented.After the fuel chapters follows an annex on legislation on energy consumption and emissions of road vehicles. figs., tabs., refs.

  2. Software independence: impact on automotive product development process

    Directory of Open Access Journals (Sweden)

    M. Pappalardo

    2008-12-01

    Full Text Available Purpose: Currently, in automotive industries one of the most important works in product design is the evaluationof crash events using FEM simulation; in this context, software independence, that means to obtain the samesimulation results on the same vehicle-model using different FEM solvers, will be useful for reducing virtualprototyping time and consequently Time To Market.Design/methodology/approach: The carrying out of a software-independence translation methodology is theaim of this work, which is an input data translation by a methodology independent of the CAE calculationenvironment and allows reducing significantly the product development time. This methodology will bedeveloped by routines written ad hoc in Matlab language, that carries back in LS-DYNA environment the cardswritten in RADIOSS environment, supported by TextPad editor and completed by pre-processor Hypermesh.Findings: The translation could be made using the pre and post-processor Hypermesh and the RADIOSS modelcard manual correction, but this way working increases greatly the Time To Market, although today it is the onlyprocedure used in the most important Italian automotive industries.Research limitations/implications: Most of crash simulation models are carried out in RADIOSS environment,but the LS-DYNA environment potentialities exploration has increased the simulations demand using LSDYNAsoftware; therefore the development of a translation methodology like that satisfies this requirement.Practical implications: Software independence in Virtual Prototyping could accelerate several processes,bringing many benefits such as the reduction in product development time and in real prototyping costs and theincrease in quality, carrying out more competitive product on the market.Originality/value: The carrying out of a translation methodology, that allows to carry back in a softwareenvironment the Know How developed for another software environment, will provide considerable

  3. Asjatundja soovitab Eesti Energia kiiresti börsile viia / Tiit Nigul ; interv. Andrus Karnau

    Index Scriptorium Estoniae

    Nigul, Tiit

    2008-01-01

    Eesti Energia endine juhatuse liige vastab küsimustele, mis puudutavad riigi energiapoliitikat ja -varustust, elektrienergia hinnatõusu, energiafirma börsileminekut, tasakaalu konkurentsiameti ja Eesti Energia vahel, ettevõtte tulusid, Narva Elektrijaamade tootmisvõimsust, koostööd Leedu tuumajaama projektiga, elektriturgu, ettevõtja Urmas Sõõrumaa süüdistamist siseinfo kasutamises, Eesti Energia strateegilist eesmärki saavutada aastaks 2015 kaks miljonit klienti

  4. Analüütikud soovitavad Eesti Energia börsile viia / Piret Reiljan

    Index Scriptorium Estoniae

    Reiljan, Piret, 1983-

    2008-01-01

    Kohalikud analüütikud soovitavad viia Eesti Energia börsile, kuna see elavdaks aktsiaturgu ja tõmbaks ligi välisinvestoreid. Vt. samas: Raivo Vare: raske aeg töötab Eesti Energia börsiletoomise kasuks; Analüüs ootab pääsu valitsuskabinetti; Juhid ei püsi enam Eesti Energias. Diagrammid: Majandusnäitajad; Varade maht

  5. Applications of the renewable energies; Aplicaciones de las energias renovables

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Rocha, Luis Martin [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

    2001-07-01

    The solar energy manifests itself in different forms and its application has been fundamental for the humankind development. These forms are known as renewable energies, since they are energy forms that are renewed or remade with time or that are so abundant on Earth, that they will last for hundreds or thousands of years, either we use them or not. The main advantage of the utilization of the renewable energies in comparison with hydrocarbons is the one of having smaller impact on the environment, which brings about the conservation of nonrenewable resources, and to postpone its exhaustion. They allow the distributed generation, diminishing the power losses in the transmission and distribution systems, which increases the overall efficiency. In addition they can be the drive for regional development and generation of employment, because when having applications in remote zones and being a field still not completely developed in Mexico, the possibility exists of enabling professionals and technicians. From the point of view of the power sector, the renewable energies extend the supply and availability of energy, making more flexible and independent the operation and reliability of the national power system. [Spanish] La energia solar se manifiesta de diversas formas y su aplicacion ha sido fundamental para el desarrollo de la humanidad. A estas formas se les conoce como energias renovables, ya que son formas de energia que se van renovando o rehaciendo con el tiempo o que son tan abundantes en la tierra, que perduraran por cientos o miles de anos, las usemos o no. La principal ventaja del aprovechamiento de las energias renovables en comparacion con los hidrocarburos es la de tener menor impacto al medio ambiente, lo que trae consigo la conservacion de recursos no renovables, y posponer su termino. Permiten la generacion distribuida, disminuyendo las perdidas energeticas en los sistemas de transmision y distribucion, lo que incrementa la eficiencia general. Ademas

  6. INTER VEHICLE WIRELESS COMMUNICATION SYSTEM

    Directory of Open Access Journals (Sweden)

    R. A. Lende

    2015-02-01

    Full Text Available In this paper we presented wireless communication between two or more number of vehicles. Wireless communication can also be used within safety, efficiency and infotainmentareas by using the IEEE- and ASTMadopted Dedicated Short Range Communication (DSRC standard. The paper first gives an overview of automotive applications relying on wireless communications, with particular focus on telemetric. Along with a description of the DSRC architecture, we introduce the concept of CCA and its implementation requirements in the context of a vehicle to-vehicle wireless network, primarily at the Medium Access Control (MAC and the routing layer. An overview is then provided to establish that the MAC and routing protocols from traditional Mobile Ad Hoc networks are not directly applicable for CCA and similar safety-critical applications.

  7. Automotive Electrical and Electronic System II; Automotive Mechanics-Intermediate: 9045.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This automotive electrical and electronic system course is an intermediate course designed for the student who has completed automotive Electrical and Electronic System I. The theory and principles of operation of the components of the starting and charging systems and other electrical accessory systems in the automobile will be learned by the…

  8. 75 FR 34170 - Plastic Omnium Automotive Exteriors, LLC, Anderson, SC; Plastic Omnium Automotive Exteriors, LLC...

    Science.gov (United States)

    2010-06-16

    ..., South Carolina. The notice was published in the Federal Register April 23, 2010 (75 FR 21356). The... Employment and Training Administration Plastic Omnium Automotive Exteriors, LLC, Anderson, SC; Plastic Omnium Automotive Exteriors, LLC, Troy, MI; Amended Certification Regarding Eligibility To Apply for...

  9. Automotive-adept: a lightweight assessment method for the automotive Irish software industry

    OpenAIRE

    Mc Caffery, Fergal; Richardson, Ita; Moller, Peter

    2007-01-01

    peer-reviewed In this paper we describe how a lightweight assessment method was developed to educate Irish software small-to-medium sized enterprises (SMEs)1 in relation to becoming automotive software suppliers. The main goal of this assessment method is to provide software SMEs with a SPI path to becoming automotive software suppliers.

  10. Automotive Lithium-ion Cell Manufacturing: Regional Cost Structures and Supply Chain Considerations

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Donald [Clean Energy Manufacturing Analysis Center, Godlen, CO (United States); Elgqvist, Emma [Clean Energy Manufacturing Analysis Center, Godlen, CO (United States); Santhanagopalan, Shriram [Clean Energy Manufacturing Analysis Center, Godlen, CO (United States)

    2016-04-08

    Manufacturing capacity for lithium-ion batteries (LIBs)--which power many consumer electronics and are increasingly used to power electric vehicles--is heavily concentrated in east Asia. Currently, China, Japan, and Korea collectively host 88% of all LIB cell and 79% of automotive LIB cell manufacturing capacity. Mature supply chains and strong cumulative production experience suggest that most LIB cell production will remain concentrated in Asia. However, other regions--including North America--could be competitive in the growing automotive LIB cell market under certain conditions. To illuminate the factors that drive regional competitiveness in automotive LIB cell production, this study models cell manufacturing cost and minimum sustainable price, and examines development of LIB supply chains and current LIB market conditions. Modeled costs are for large format, 20-Ah stacked pouch cells with lithium-nickel-manganese-cobalt-oxide (NMC) cathodes and graphite anodes suitable for automotive application. Production volume is assumed to be at commercial scale, 600 MWh per year.

  11. Reduza a sua fatura de eletricidade e poupe dinheiro. Como optar pelo melhor comercializador de energia

    OpenAIRE

    Rodrigues, Luís; Pereira, Pedro; Ferreira, Judite

    2015-01-01

    O presente artigo tem como principal objetivo, orientar o leitor e consumidor de energia elétrica a reduzir a sua faturação energética. Focando-se no mercado liberalizado de energia e em assuntos relacionados com o mesmo, será abordado o processo de decisão da escolha do comercializador de energia mais adequado a cada tipo de perfil. Serão ainda abordados neste artigo, alguns aspectos relevantes, que podem fazer com que o consumidor de energia economize.

  12. L'energia nuclear: pot resoldre el problema de l'escalfament global?

    OpenAIRE

    Puig, Josep

    2006-01-01

    Sovint es diu que l'energia nuclear pot ser la solució pel problema de l'escalfament global: l'article presenta dades i raonaments per concloure que, si tota l'electricitat mundial fos d'origen nuclear, l'escalfament global es reduiria tan sols en un 12%. També s'analitzen els subproductes militars de la indústria de l'energia nuclear "civil" i la problemàtica dels residus radioactius de l'energia nuclear de fissió. També s'analitza l'alt grau de dificultats que presenta l'energia nuclear de ...

  13. Interface entre Fontes de Energia Renovável e a Rede Eléctrica

    OpenAIRE

    Pregitzer, Ricardo G.; Sousa, Tiago N.; Júlio S Martins; Afonso, João L.

    2005-01-01

    Este artigo apresenta a modelação, simulação e análise de um sistema que realiza a interface entre fontes de energia renovável (como por exemplo, energia solar ou eólica) e a rede eléctrica. O objectivo é demonstrar que, utilizando um Filtro Activo de Potência do tipo Paralelo, composto por um andar inversor e por um sistema de controlo baseado na teoria p q, é possível injectar energia na rede eléctrica e, simultaneamente, corrigir dinamicamente problemas de qualidade de energia eléctrica, t...

  14. Kätega ravimine ehk me kõik oleme energia / Kerttu Soans

    Index Scriptorium Estoniae

    Soans, Kerttu, 1961-

    2011-01-01

    Erinevatest energia vahendamisel põhinevatest psühhotehnikatest ja ravimeetoditest: reiki, Silva ultra, maagiline maatriks ehk MM, elektromagnetvälja tasakaalustamise tehnika EMF, kvantpuudutus, bioenergeetika

  15. FY2014 Vehicle and Systems Simulation and Testing Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-03-01

    The Vehicle and Systems Simulation and Testing research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to advancing light-, medium-, and heavy-duty vehicle systems to help maximize the number of electric miles driven and increase the energy efficiency of transportation vehicles.

  16. User discrimination in automotive systems

    Science.gov (United States)

    Makrushin, Andrey; Dittmann, Jana; Vielhauer, Claus; Leich, Marcus

    2011-03-01

    The recently developed dual-view touch screens, which are announced to be installed in cars in a near future, give rise to completely new challenges in human-machine interaction. The automotive system should be able to identify if the driver or the passenger is currently interacting with the touch screen to provide a correct response to the touch. The optical devices, due to availability, acceptance by the users and multifunctional usage, approved to be the most appropriate sensing technology for driver/passenger discrimination. In this work the prototypic optical user discrimination system is implemented in the car simulator and evaluated in the laboratory environment with entirely controlled illumination. Three tests were done for this research. One of them examined if the near-infrared illumination should be switched on around the clock, the second one if there is a difference in discrimination performance between day, twilight and night conditions, and the third one examined how the intensive directional lighting influences the performance of the implemented user discrimination algorithm. Despite the high error rates, the evaluation results show that very simple computer vision algorithms are able to solve complicated user discrimination task. The average error rate of 10.42% (daytime with near-infrared illumination) is a very promising result for optical systems.

  17. Advanced automotive diesel assessment program

    Science.gov (United States)

    Sekar, R.; Tozzi, L.

    1983-01-01

    Cummins Engine Company completed an analytical study to identify an advanced automotive (light duty) diesel (AAD) power plant for a 3,000-pound passenger car. The study resulted in the definition of a revolutionary diesel engine with several novel features. A 3,000-pound car with this engine is predicted to give 96.3, 72.2, and 78.8 MPG in highway, city, and combined highway-city driving, respectively. This compares with current diesel powered cars yielding 41.7, 35.0, and 37.7 MPG. The time for 0-60 MPH acceleration is 13.9 sec. compared to the baseline of 15.2 sec. Four technology areas were identified as crucial in bringing this concept to fruition. They are: (1) part-load preheating, (2) positive displacement compounding, (3) spark assisted diesel combustion system, and (4) piston development for adiabatic, oilless diesel engine. Marketing and planning studies indicate that an aggressive program with significant commitment could result in a production car in 10 years from the date of commencement.

  18. Power Modulation Investigation for High Temperature (175-200 degrees Celcius) Automotive Application

    Energy Technology Data Exchange (ETDEWEB)

    McCluskey, F. P.

    2007-04-30

    Hybrid electric vehicles were re-introduced in the late 1990s after a century dominated by purely internal combustion powered engines[1]. Automotive players, such as GM, Ford, DaimlerChrysler, Honda, and Toyota, together with major energy producers, such as BPAmoco, were the major force in the development of hybrid electric vehicles. Most notable was the development by Toyota of its Prius, which was launched in Japan in 1997 and worldwide in 2001. The shift to hybrids was driven by the fact that the sheer volume of vehicles on the road had begun to tax the ability of the environment to withstand the pollution of the internal combustion engine and the ability of the fossil fuel industry to produce a sufficient amount of refined gasoline. In addition, the number of vehicles was anticipated to rise exponentially with the increasing affluence of China and India. Over the last fifteen years, major advances have been made in all the technologies essential to hybrid vehicle success, including batteries, motors, power control and conditioning electronics, regenerative braking, and power sources, including fuel cells. Current hybrid electric vehicles are gasoline internal combustion--electric motor hybrids. These hybrid electric vehicles range from micro-hybrids, where a stop/start system cuts the engine while the vehicle is stopped, and mild hybrids where the stop/start system is supplemented by regenerative braking and power assist, to full hybrids where the combustion motor is optimized for electric power production, and there is full electric drive and full regenerative braking. PSA Peugeot Citroen estimates the increased energy efficiency will range from 3-6% for the micro-hybrids to 15-25% for the full hybrids.[2] Gasoline-electric hybrids are preferred in US because they permit long distance travel with low emissions and high gasoline mileage, while still using the existing refueling infrastructure. One of the most critical areas in which technology has been

  19. State of the Art: Embedding Security in Vehicles

    Directory of Open Access Journals (Sweden)

    André Weimerskirch

    2007-06-01

    Full Text Available For new automotive applications and services, information technology (IT has gained central importance. IT-related costs in car manufacturing are already high and they will increase dramatically in the future. Yet whereas safety and reliability have become a relatively well-established field, the protection of vehicular IT systems against systematic manipulation or intrusion has only recently started to emerge. Nevertheless, IT security is already the base of some vehicular applications such as immobilizers or digital tachographs. To securely enable future automotive applications and business models, IT security will be one of the central technologies for the next generation of vehicles. After a state-of-the-art overview of IT security in vehicles, we give a short introduction into cryptographic terminology and functionality. This contribution will then identify the need for automotive IT security while presenting typical attacks, resulting security objectives, and characteristic constraints within the automotive area. We will introduce core security technologies and relevant security mechanisms followed by a detailed description of critical vehicular applications, business models, and components relying on IT security. We conclude our contribution with a detailed statement about challenges and opportunities for the automotive IT community for embedding IT security in vehicles.

  20. Energia nuclear: Uma solução para Portugal?

    OpenAIRE

    Pedro Cosme Costa Vieira

    2006-01-01

    As pessoas receiam a energia nuclear por diversas razões. Foi desenvolvida no contexto de uma guerra mundial, é a base da “destruição mútua garantida”, houve o acidente de Chernobyl e é necessário guardar o combustível utilizado durante vários séculos. Mas Portugal não tem recursos energéticos e precisa de energia para se desenvolver sem aumentar a emissão para a atmosfera de dióxido de carbono. No sentido de informar sobre a solução nuclear, neste trabalho explico a tecnologia e apresento um...

  1. Eesti Energia senine juhatus jätkab veel vähemalt aasta / Anneli Ammas, Toivo Tänavsuu

    Index Scriptorium Estoniae

    Ammas, Anneli, 1962-

    2005-01-01

    Eesti Energia nõukogu otsustas jätta ettevõtte juhatuse veel aastaks ametisse, juhikonkursi korraldamise kohta otsust ei langetatud. Nõukogu liikmete kommentaare. Lisa: Eesti Energia kasvatas eksporti

  2. O espaço da energia nuclear no Brasil

    Directory of Open Access Journals (Sweden)

    Joaquim Francisco de Carvalho

    2012-01-01

    Full Text Available Este artigo repassa a história e descreve a experiência acumulada em energia nuclear no Brasil, mostrando que as aplicações biomédicas, industriais e agrícolas desenvolveram-se bem no país, a partir dos anos 1950. Em seguida, o artigo demonstra que o país pode cobrir seu consumo de energia elétrica apenas com fontes renováveis de energia, sem recorrer a usinas nucleares de potência. Por fim, são analisados os argumentos comuns na imprensa, a favor e contrários às centrais nucleares, e são discutidos alguns aspectos comerciais e políticos do problema. São também examinadas as estratégias de vendas da indústria nuclear no Brasil.This article reviews the history and describes the experience on nuclear energy in Brazil, showing that nuclear technology applied to biomedical sciences, industry and agriculture has been largely developed in this country, from the year 1950 on. Then the paper shows that Brazil can cover its electricity consumption with only renewable energy sources, without nuclear power plants. Finally the arguments usually employed in the press, pro and against nuclear power plants are analyzed and some commercial and political aspects of the problem are commented. The sales strategy of the nuclear industry in Brazil is also commented.

  3. Computational design of an automotive twist beam

    Directory of Open Access Journals (Sweden)

    Benki Aalae

    2016-07-01

    Full Text Available In recent years, the automotive industry has known a remarkable development in order to satisfy the customer requirements. In this paper, we will study one of the components of the automotive which is the twist beam. The study is focused on the multicriteria design of the automotive twist beam undergoing linear elastic deformation (Hooke׳s law. Indeed, for the design of this automotive part, there are some criteria to be considered as the rigidity (stiffness and the resistance to fatigue. Those two criteria are known to be conflicting, therefore, our aim is to identify the Pareto front of this problem. To do this, we used a Normal Boundary Intersection (NBI algorithm coupling with a radial basis function (RBF metamodel in order to reduce the high calculation time needed for solving the multicriteria design problem. Otherwise, we used the free form deformation (FFD technique for the generation of the 3D shapes of the automotive part studied during the optimization process.

  4. Green competitiveness research on Chinese automotive enterprises

    Directory of Open Access Journals (Sweden)

    Yuanhui Li

    2014-05-01

    Full Text Available Purpose: More and more executives of automobileindustry in China start to recognize the concept of green competitiveness recently. However, relatively less research attention has been devoted to the consideration of measurement. This paper aims to find empirical approach to quantify green competitiveness for automotive enterprises. The connotation of green competitiveness is explored and one suite of evaluation index system has been proposed with four dimensions including environmental, resource, capability and knowledge.Design/methodology/approach: By introducing the factor analysis method, green competitiveness has been measured through an empirical analysis of 24 automotive enterprises within China.Findings: The results indicate that those elements, such as enterprise resource possession and utilization; environment, responsibility and knowledge; profitability; management efficiency, have significant effect on the green competitiveness for automotive enterprises. The further analysis also unveils the advantages and disadvantages of green competitiveness for each company and the direction for improvement.Research limitations/implications: Guide regulators and managers of automobile industry to take some measures to enhance their green competitive advantage.Practical implications: Provide practical methods to measure green competitiveness for automotive enterprises.Originality/value: This paper proposes an evaluation index system of green competitiveness for automotive enterprises. The suggestions of our research will be beneficial to enterprise executives and industry regulators.

  5. Electromobility. Are the suppliers equipped for the structural change? State of the art and recommendations for action for the automotive location Stuttgart; Elektromobilitaet. Zulieferer fuer den Strukturwandel geruestet? Status quo und Handlungsempfehlungen fuer den Automobilstandort Metropolregion Stuttgart

    Energy Technology Data Exchange (ETDEWEB)

    Stahlecker, Thomas; Lay, Gunter; Zanker, Christoph [Fraunhofer-Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

    2011-04-15

    The contribution under consideration examines the future viability of automotive suppliers in Baden-Wuerttemberg (Federal Republic of Germany) in terms of a technological change. The question has to be examined whether the innovation potential of the automotive supplier is adequate in order to face the potential restructuring demands successfully. The investigations show that the automotive supply industry at the top still is positioned very well. In contrast, medium-sized suppliers rather are poorly equipped regarding the challenges of electromobility. With this in mind three strategic options for companies in the automotive industry as well as for the policy were formulated. A tabular summary provides an overview on the identified bottlenecks of small and medium-sized automotive supplier in the field of electric vehicles.

  6. Licensing of non intrusive inspection equipment s for load and passengers vehicles that use X rays with energies up to 9 MeV. Mexican experience; Licenciamiento de equipos de inspeccion no intrusiva para vehiculos de carga y pasajeros que utilizan rayos X con energias de hasta 9 megaelectronvolts. Experiencia Mexicana

    Energy Technology Data Exchange (ETDEWEB)

    Munoz M, G. A.; Jimenez C, I., E-mail: armando.munoz@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

    2013-10-15

    In the last years and like part of the extensive program of national security, in Mexico have been introduced a great quantity of non intrusive inspection equipment s for load and passengers vehicles that use X rays up to 9 MeV. Due to the great variety of equipment s, the Comision Nacional de Seguridad Nuclear y Salvaguardias (Mexican regulator organ) has established specific guidelines for their licensing and use supervision. In this work the adopted guidelines are exposed in the technical and administrative evaluation for the later licensing of these equipment s. Relative particular questions to the site of these equipment s and the impact in the public opinion that their use can generate are discussed. (author)

  7. A pedagogia do conceito de energia: contributo para a utilização formativa do conceito de energia

    OpenAIRE

    Valente, Mariana de Jesus Pedreira

    1993-01-01

    Dissertação de mestrado em Ciências da Educação: área de Educação e Desenvolvimento Quando nasce um novo conceito é necessário um termo para o designar. O termo energia é utilizado para designar o conceito científico que emerge, a meados do século dezanove, com o estabelecimento do, então, Princípio de Conservacão da Força. Que relações se podem estabelecer entre o novo conceito e a ideia de energia que nos finais do século dezoito usufruía de tão grande sucesso? Na prime...

  8. Automotive Battery Modelling and Management

    OpenAIRE

    N. M. Hammad

    2014-01-01

    The estimation of vehicle battery performance is typically addressed by testing the battery under specific operation conditions by using a model to represent the test results. Approaches for representing test results range from simple statistical models to neural networks to complex, physics-based models. Basing the model on test data could be problematical when testing becomes impractical with many years life time tests. So, real time estimation of battery performance, an important problem i...

  9. Energy of our planet; La energia de nuestro planeta

    Energy Technology Data Exchange (ETDEWEB)

    Torres Alvarado, Ignacio; Santoyo Gutierrez, Edgar [Centro de Investigacion en Energia (CIE) de la UNAM, Temixco, Morelos (Mexico)

    2010-07-01

    The total heat flowing from the Earth's interior to the surface is estimated at {approx}42 TW (1012 watts) of which 19% comes from the crust, the 76% comes from the mantle and the 5% comes from the nucleus. The ability to drive the heat of the rocks is very low, causing the need of hundreds of millions of years to exhaust this energy resource. Based on the properties of the renewable heat flow and the long geological times required for its exhaustion, the Earth energy is considered by many scientists as a source of inexhaustible renewable energy, and by its natural availability in all parts of our planet, perhaps the best distributed, together with solar energy. One of the most important advantages of geothermal energy is that its energy can be used not only to generate electric power, but in a large number of applications or direct uses: the heating of buildings, greenhouses or incubators; aquaculture; in various industrial processes (drying products, food packaging, paper manufacturing, chemicals, etc.); balneology for recreational purposes and medicines, and many other applications. In fact, geothermal applications can be integrally one after another or in processes in cascade to fully utilize its energy content. [Spanish] El calor total que fluye del interior de la Tierra hacia la superficie se estima en {approx}42 TW (1012 watts) del cual 19% proviene de la corteza, el 76% proviene del manto y el 5% proviene del nucleo. La capacidad para conducir el calor de las rocas es muy baja, lo que ocasiona que se necesiten cientos de millones de anos para agotar este recurso energetico. Basado en las propiedades renovables del flujo de calor y los largos tiempos geologicos requeridos para su agotamiento, la energia de la Tierra es considerada por muchos cientificos como una fuente de energia renovable, practicamente inagotable, y por su disponibilidad natural en todo nuestro planeta, quizas la mejor distribuida, junto con la energia solar. Una de las ventajas mas

  10. Eesti Energia nõukogu liikmed Jaotusvõrgu hinnatõusutaotlust kommenteerima ei kipu / Katre Pilvinski

    Index Scriptorium Estoniae

    Pilvinski, Katre

    2010-01-01

    Eesti Energia nõukogu liige Kalle Palling kommenteerib peaminister Andrus Ansipi öeldut, et Eesti Energia investeeringud tuleb üle vaadata. Nõukogu liikme Rein Kilgi sõnul tunduvad talle rünnakud Eesti Energia vastu ülekohtused

  11. The Prospect of Mass Customisation in the Chinese Automotive Industry

    OpenAIRE

    Dong, Xihan

    2011-01-01

    The automotive industry is one of the largest manufacturing industries and the development of a country’s automotive industry can represent its economy to some extent. Because of the fierce competition in the automotive industry, customers have more choices and they cannot be satisfied with standard products any more. Therefore, some global automotive manufacturers implement mass customisation as their production strategy which aims to provide customised automobiles according to customers’ re...

  12. Innovation in the Automotive Sector of the Philippines

    OpenAIRE

    Quimba, Francis Mark A.; Rosellon, Maureen Ane D.

    2011-01-01

    The performance of the Philippine automotive industry has steadily improved after the Asian crisis. However, relative to the performance of the automotive industry in other countries, the automotive sector in the country has languished. To understand the challenges being faced by the automotive assemblers, as well as parts and components manufacturers, the innovation capability and activities of selected establishments are analyzed following the framework developed by Bessant. This paper find...

  13. Optimization and optimal control in automotive systems

    CERN Document Server

    Kolmanovsky, Ilya; Steinbuch, Maarten; Re, Luigi

    2014-01-01

    This book demonstrates the use of the optimization techniques that are becoming essential to meet the increasing stringency and variety of requirements for automotive systems. It shows the reader how to move away from earlier  approaches, based on some degree of heuristics, to the use of  more and more common systematic methods. Even systematic methods can be developed and applied in a large number of forms so the text collects contributions from across the theory, methods and real-world automotive applications of optimization. Greater fuel economy, significant reductions in permissible emissions, new drivability requirements and the generally increasing complexity of automotive systems are among the criteria that the contributing authors set themselves to meet. In many cases multiple and often conflicting requirements give rise to multi-objective constrained optimization problems which are also considered. Some of these problems fall into the domain of the traditional multi-disciplinary optimization applie...

  14. Automotive Lightweight Materials: the Roles of Nde in Bringing New Materials Into Production

    Science.gov (United States)

    Dasch, Cameron J.

    2008-02-01

    The automotive industry is in the midst of a time of tremendous change. There is an almost perfect storm of changing governmental and market requirements seeking much higher fuel economy, low or no carbon dioxide emissions, and much higher crash and safety performance. Moreover, this occurs in a globe-spanning market that has more low-cost manufacturers than ever before. This confluence of factors leads to new vehicles with many new types of powertrains having unprecedented power densities and highly-engineered body structures with many new materials and joining methods. These are being turned out with shorter lead times, higher quality requirements, and continuous cost pressures. This talk will review the role in NDE in bringing new materials and processes to market, some of the applications in production, and to highlight some of the current NDE needs driven by these forces on the automotive industry.

  15. The Realistic Mobility Evaluation of Vehicular Ad-Hoc Network for Indian Automotive Networks

    Directory of Open Access Journals (Sweden)

    V.S.Dhaka

    2014-04-01

    Full Text Available In recent years, continuous progress in wireless communication has opened a new research field in computer networks. Now a day’s wireless ad-hoc networking is an emerging research technology that needs attention of the industry people and the academicians. A vehicular ad-hoc network uses vehicles as mobile nodes to create mobility in a network. It’s a challenge to generate realistic mobility for Indian networks as no TIGER or Shapefile map is available for Indian Automotive Networks. This paper simulates the realistic mobility of the Vehicular Ad-hoc Networks (VANETs. The key feature of this work is the realistic mobility generation for the Indian Automotive Intelligent Transport System (ITS and also to analyze the throughput, packet delivery fraction (PDF and packet loss for realistic scenario. The experimental analysis helps in providing effective communication for safety to the driver and passengers.

  16. Vehicle Embedded Data Stream Processing Platform for Android Devices

    Directory of Open Access Journals (Sweden)

    Shingo Akiyama

    2015-02-01

    Full Text Available Automotive information services utilizing vehicle data are rapidly expanding. However, there is currently no data centric software architecture that takes into account the scale and complexity of data involving numerous sensors. To address this issue, the authors have developed an in-vehicle data-stream management system for automotive embedded systems (eDSMS as data centric software architecture. Providing the data stream functionalities to drivers and passengers are highly beneficial. This paper describes a vehicle embedded data stream processing platform for Android devices. The platform enables flexible query processing with a dataflow query language and extensible operator functions in the query language on the platform. The platform employs architecture independent of data stream schema in in-vehicle eDSMS to facilitate smoother Android application program development. This paper presents specifications and design of the query language and APIs of the platform, evaluate it, and discuss the results.

  17. 16 CFR 306.5 - Automotive fuel rating.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Automotive fuel rating. 306.5 Section 306.5 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS AUTOMOTIVE FUEL RATINGS, CERTIFICATION AND POSTING Duties of Refiners, Importers and Producers § 306.5 Automotive...

  18. Best Practices in School-to-Careers: The Automotive Industry.

    Science.gov (United States)

    National Employer Leadership Council, Washington, DC.

    This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the automotive industry. First, the current state of the automotive industry is reviewed and the role of STC in addressing automotive service needs is explained. Next, the…

  19. Can Distance Learning Be Used to Teach Automotive Management Skills?

    Science.gov (United States)

    Noto, Teresa L.

    2011-01-01

    Today's automotive college students will shape the future of the automobile industry. The success of college-level automotive programs has long been dependent on the students' ability to participate in hands-on classroom based interactions. In this article, distance learning and how it can be used to teach automotive management skills, as well as…

  20. 25 CFR 117.10 - Purchase of automotive equipment.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Purchase of automotive equipment. 117.10 Section 117.10... COMPETENCY § 117.10 Purchase of automotive equipment. The superintendent may disburse from the surplus funds of an adult Indian not to exceed $2,000 for the purchase of automotive equipment when the...

  1. Eesti Energia börsile! Argus riputaks ta meile kiviks kaela / Raimo Poom

    Index Scriptorium Estoniae

    Poom, Raimo

    2010-01-01

    Eesti Energia võimalikust börsileviimisest. Autori sõnul poleks börsikavagi täieliku riskita, peaküsimus võib hakata puudutama nn. rahvaaktsia kava. Kõige halvem oleks Eesti Energia puhul otsustamatus

  2. Eesti Energia juhi küsimus jäi ajapuudusel lahendamata / Villy Paimets

    Index Scriptorium Estoniae

    Paimets, Villy, 1972-

    2005-01-01

    Eesti Energia nõukogu jättis otsustamata, kas ettevõtte juhatuse esimehe kohale kuulutatakse välja avalik konkurss. Vt. samas: Oki valulaps on elektri hind; Kronoloogia: Eesti Energia on Gunnar Oki juhtimisel kõvasti kosunud

  3. Eesti Energia kärpis elektrihinna tõusu / Aivar Reinap

    Index Scriptorium Estoniae

    Reinap, Aivar, 1968-

    2004-01-01

    Ilmunud ka: Põhjarannik, 13. veebr. 2004, lk. 1. Eesti Energia nõukogu otsustas vähendada taotletavat elektrienergia hinnatõusu 15%ni ja lükkas hinnapakettide lõpliku kinnitamise edasi nädala võrra. Riigikogu ja Eesti Energia nõukogu liikme Janno Reiljani arvamus

  4. Roheline energia läheb müüki topelthinnaga / Ervin Soon

    Index Scriptorium Estoniae

    Soon, Ervin

    2001-01-01

    Eesti Energia on märtsi keskel käivitanud Rohelise Energia kampaaniaga leidnud võtte, kuidas kaks korda kõrgema elektri müügihinnaga katta alternatiivenergia kohustusliku kokkuostu järjest kasvavaid kulusid

  5. Energia Renovable para Centros de Salud Rurales (Renewable Energy for Rural Health Clinics)

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, T.; Olson, K.

    1999-07-28

    Esta es la primera de una serie de guias de aplicaciones que el Programa de Energia de Villas de NREL esta comisionando para acoplar sistemas comerciales renovables con aplicaciones rurales, incluyendo agua, escuelas rurales y micro empresas. La guia esta complementada por las actividades de desarrollo del Programa de Energia de Villas de NREL, proyectos pilotos internacionales y programas de visitas profesionales.

  6. Ülikoolihõnguline personalikoolitus Eesti Energias / Annika Kaseorg ; küsitlenud Kadri Kiigema

    Index Scriptorium Estoniae

    Kaseorg, Annika

    2007-01-01

    Eesti Energia alustatud uuest projektist "Nädalalõpu Ülikool" räägib Eesti Energia Jaotusvõrgu personali arendamise projektijuht Annika Kaseorg. Avaseminaril tegi ettekande töövõime säilitamisest TLÜ terviseteaduste ja spordi teaduskonna dekaan Kristjan Port

  7. 77 FR 74472 - Application to Export Electric Energy; Energia Renovable S.C., LLC

    Science.gov (United States)

    2012-12-14

    ... Application to Export Electric Energy; Energia Renovable S.C., LLC AGENCY: Office of Electricity Delivery and... Renovable) has applied for authority to transmit electric energy from the United States to Mexico pursuant... application from Energia Renovable for authority to transmit electric energy from the United States to...

  8. Fatigue life of automotive rubber jounce bumper

    International Nuclear Information System (INIS)

    It is evident that most rubber components in the automotive industry are subjected to repetitive loading. Vigorous research is needed towards improving the safety and reliability of the components. The study was done on an automotive rubber jounce bumper with a rubber hardness of 60 IRHD. The test was conducted in displacement-controlled environment under compressive load. The existing models by Kim, Harbour, Woo and Li were adopted to predict the fatigue life. The experimental results show strong similarities with the predicted models.

  9. Fatigue life of automotive rubber jounce bumper

    Energy Technology Data Exchange (ETDEWEB)

    Sidhu, R S [Automotive Engineering Unit, Institute of Advanced Technology, University Putra Malaysia, 43400, UPM Serdang, Selangor (Malaysia); Ali, Aidy, E-mail: aidy@eng.upm.edu.my [Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM, Serdang Selangor (Malaysia)

    2010-05-15

    It is evident that most rubber components in the automotive industry are subjected to repetitive loading. Vigorous research is needed towards improving the safety and reliability of the components. The study was done on an automotive rubber jounce bumper with a rubber hardness of 60 IRHD. The test was conducted in displacement-controlled environment under compressive load. The existing models by Kim, Harbour, Woo and Li were adopted to predict the fatigue life. The experimental results show strong similarities with the predicted models.

  10. Automotive cooling systems based on metal hydrides

    OpenAIRE

    Linder, Marc

    2010-01-01

    The present work focuses on metal hydride sorption systems as an alternative technology for automotive air-conditioning systems. Although this technology offers the possibility to increase the energy efficiency of a car (by utilising waste heat) and consequently reduces the CO2 emissions, its weight specific cooling power has so far been the main obstacle for an automotive application. Based on investigations of various metal hydrides, two alloys (LmNi4.91Sn0.15 and Ti0.99Zr0.01V0.43Fe0.09Cr0...

  11. Innovation and Entrepreneurship in the Automotive Business

    DEFF Research Database (Denmark)

    2011-01-01

    The global automotive business is one of the most competitive environment you can imagine. As an independent inventor or as a small development company it is very challenging to be successful in implementing new ideas and components. In this mature and somewhat conservative technical environment...... address you will have a much better access the decision making process and get enough interest for a potential business deal. After 20 years as a supplier of engineering services to the automotive industry and 10 years as head of Global R&D at Scania CV AB, I have experienced pros and cons both from a...

  12. Nanotechnology impact on the automotive industry.

    Science.gov (United States)

    Wong, Kaufui V; Paddon, Patrick A

    2014-01-01

    Nanotechnology has been implemented widely in the automotive industry. This technology is particularly useful in coatings, fabrics, structural materials, fluids, lubricants, tires, and preliminary applications in smart glass/windows and video display systems. A special sub-class of improved materials, alternative energy, has also seen a boost from advances in nanotechnology, and continues to be an active research area. A correlation exists in the automotive industry between the areas with increased nanotechnology incorporation and those with increased profit margins via improvements and customer demands. PMID:25360613

  13. Automotive shredder residue (ASR) characterization for a valuable management.

    Science.gov (United States)

    Morselli, Luciano; Santini, Alessandro; Passarini, Fabrizio; Vassura, Ivano

    2010-11-01

    Car fluff is the waste produced after end-of-life-vehicles (ELVs) shredding and metal recovery. It is made of plastics, rubber, glass, textiles and residual metals and it accounts for almost one-third of a vehicle mass. Due to the approaching of Directive 2000/53/EC recycling targets, 85% recycling rate and 95% recovery rate in 2015, the implementation of automotive shredder residue (ASR) sorting and recycling technologies appears strategic. The present work deals with the characterization of the shredder residue coming from an industrial plant, representative of the Italian situation, as for annual fluxes and technologies involved. The aim of this study is to characterize ASR in order to study and develop a cost effective and environmentally sustainable recycling system. Results show that almost half of the residue is made of fines and the remaining part is mainly composed of polymers. Fine fraction is the most contaminated by mineral oils and heavy metals. This fraction produces also up to 40% ashes and its LHV is lower than the plastic-rich one. Foam rubber represents around half of the polymers share in car fluff. Moreover, some chemical-physical parameters exceed the limits of some parameters fixed by law to be considered refuse derived fuel (RDF). As a consequence, ASR needs to be pre-treated in order to follow the energy recovery route. PMID:20566277

  14. Automotive thermoelectric generators and air conditioner/heaters

    International Nuclear Information System (INIS)

    Full text: The US Department of Energy initiated the application of thermoelectric generators (TEGs) to vehicles in 1994. This TEG was built by Hi-Z Technologies evaluated on a dynamometer test stand then tested successfully installed on a fully loaded Heavy Duty Diesel truck on the PACCAR test track for the equivalence of 550,000 miles. Today every major automobile manufacturer is investigating thermoelectric applications. The US Department of Energy is supporting the development of production prototype TEGs with teams headed by BSST and GM to integrate TEGs to directly convert engine waste heat to electricity in the BMW X6, the Ford Fusion and the Chevy Suburban. These first generation TEGs will provide a nominal 5 percent improvement in on-highway fuel economy by allowing the alternator to be downsized by at least 1/3. The 2nd generation TEG is planned to replace the alternator and provide a nominal 10 percent improvement in fuel economy. DOE/NETL conducted a competitive procurement for automotive thermoelectric air conditioners/heaters (TE HVAC) development and selected teams headed by Ford and GM to develop this technology. Current air conditioners use the R134a refrigerant gas, which produces 1300 times the 'Greenhouse Gas Effect' of carbon dioxide (CO2), the primary 'Greenhouse Gas'. Approximately 41 Million Metric tons of CO2 equivalent (CO2e) are released to the atmosphere in the US annually from air conditioner compressor seal leakage and frontal collisions wherein the R134a refrigerant gas containment was ruptured. The TE HVACs are candidates to eliminate refrigerant gases from vehicles. A problem with maintaining occupant comfort in an electrically assisted vehicle was illustrated by Bob Lutz, Vice Chairman, General Motors, who drove a Chevy Volt in January in Detroit and to obtain occupant comfort had to turn on the 5 kW resistive heater which reduced the battery only propulsion mileage from 40 to 28. Preliminary analysis indicates that with TE HVAC a

  15. Evaluation of fleet systems model for vehicle compatibility

    NARCIS (Netherlands)

    Zweep, C.D. van der; Kellendonk, G.; Lemmen, P.P.M.

    2005-01-01

    On behalf of NHTSA, the European Commission, and the Dutch Ministry of Traffic and Transport, the Safety department of TNO Automotive is performing numerical fleet studies using multi-body models. Aim is to develop strategies for optimisation and evaluating the effects in new vehicles based on propo

  16. Impacts of electric vehicle charging on distribution networks in Denmark

    DEFF Research Database (Denmark)

    Xu, Lizhong; Yang, Guang Ya; Xu, Zhao;

    2011-01-01

    Electric vehicles (EVs) provide a unique opportunity to reduce carbon dioxide emissions from the transport sector by drawing on renewable resources. As EVs become increasingly popular in the automotive market, the study of its impacts on the low-voltage grid has become increasingly important. The...

  17. 2015 Vehicle Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Williams, Susan E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boundy, Robert G. [Roltek, Inc., Clinton, TN (United States); Moore, Sheila [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-04-01

    This is the seventh edition of the Vehicle Technologies Market Report, which details the major trends in U.S. light-duty vehicle and medium/heavy truck markets as well as the underlying trends that caused them. This report is supported by the U.S. Department of Energy s (DOE) Vehicle Technologies Office (VTO), and, in accord with its mission, pays special attention to the progress of high-efficiency and alternative-fuel technologies. After opening with a discussion of energy and economics, this report features a section each on the light-duty vehicle and heavy/medium truck markets, and concluding with a section each on technology and policy. The first section on Energy and Economics discusses the role of transportation energy and vehicle markets on a national (and even international) scale. For example, Figures 12 through 14 discuss the connections between global oil prices and U.S. GDP, and Figures 22 and 23 show U.S. employment in the automotive sector. The following section examines Light-Duty Vehicle use, markets, manufacture, and supply chains. Figures 27 through 63 offer snapshots of major light-duty vehicle brands in the United States and Figures 70 through 81 examine the performance and efficiency characteristics of vehicles sold. The discussion of Medium and Heavy Trucks offers information on truck sales (Figures 90 through 94) and fuel use (Figures 97 through 100). The Technology section offers information on alternative fuel vehicles and infrastructure (Figures 105 through 118), and the Policy section concludes with information on recent, current, and near-future Federal policies like the Corporate Average Fuel Economy standard (Figures 130 through 137). In total, the information contained in this report is intended to communicate a fairly complete understanding of U.S. highway transportation energy through a series of easily digestible nuggets. Suggestions for future expansion, additional information, or other improvements are most welcome.

  18. Development and Early Adoption of Electric Vehicles: Understanding the tempest

    OpenAIRE

    Sierzchula, W.

    2015-01-01

    Electric vehicles are one innovation that could help reduce CO2 emissions from the transportation sector and mitigate the harmful effects of climate change. However, substantial roadblocks to their adoption exist including high purchase cost, lack of charging infrastructure, and long charging time. This thesis explores factors from consumers, government policy and the auto industry which influence electric vehicle development and early adoption. It identifies that although the automotive indu...

  19. Continuously variable transmission: Assessment of applicability to advance electric vehicles

    Science.gov (United States)

    Loewenthal, S. H.; Parker, R. J.

    1981-01-01

    A brief historical account of the evolution of continuously variable transmissions (CVT) for automotive use is given. The CVT concepts which are potentially suitable for application with electric and hybrid vehicles are discussed. The arrangement and function of several CVT concepts are cited along with their current developmental status. The results of preliminary design studies conducted on four CVT concepts for use in advanced electric vehicles are discussed.

  20. SERVICE ISSUES: overview of electric vehicles use in Vietnam

    OpenAIRE

    Nguyen, Xuan Truong; Nguyen, Quang Hung

    2015-01-01

    Due to the problems caused by the gasoline engine on the environment and people, the automotive industry has turned to the electrically powered vehicle. Electric Vehicles (EVs) such as electric two-wheelers and electric cars provide convenient local transportation and are becoming popular means of transport in Vietnam in recent years. Electric bicycles, electric motorbikes and electric cars appeared in Vietnam since the early 2000s and are growing very quickly. As of September 2015, Vietnam's...

  1. Avaliação económica de um investimento em geração de energia das ondas e energia solar térmica

    OpenAIRE

    Nunes, Ruben Fernando Lopes

    2012-01-01

    O presente trabalho tem como objectivo efectuar a avaliação económica e determinar a viabilidade com e sem os incentivos fiscais de duas tecnologias de conversão de duas fontes distinta e emergentes de energia renovável, o Concentrador Cilindro-parabólico e a Torre Solar para a energia solar termoeléctrica e a Coluna de Água Oscilante e o Pelamis para a energia das ondas. Realiza-se uma curta abordagem à energia Solar e à energia dos Oceanos, e às tecnologias existentes para estes tipos de en...

  2. 2011 Vehicle Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy Cagle [ORNL; Boundy, Robert Gary [ORNL; Diegel, Susan W [ORNL

    2012-02-01

    This report details the major trends in U.S. light-duty vehicle and medium/heavy truck markets as well as the underlying trends that caused them. This report is supported by the U.S. Department of Energy s (DOE) Vehicle Technologies Program (VTP), and, in accord with its mission, pays special attention to the progress of high-efficiency and alternative-fuel technologies. This third edition since this report was started in 2008 offers several marked improvements relative to its predecessors. Most significantly, where earlier editions of this report focused on supplying information through an examination of market drivers, new vehicle trends, and supplier data, this edition uses a different structure. After opening with a discussion of energy and economics, this report features a section each on the light-duty vehicle and heavy/medium truck markets, and concluding with a section each on technology and policy. In addition to making this sectional re-alignment, this year s edition of the report also takes a different approach to communicating information. While previous editions relied heavily on text accompanied by auxiliary figures, this third edition relies primarily on charts and graphs to communicate trends. Any accompanying text serves to introduce the trends communication by the graphic and highlight any particularly salient observations. The opening section on Energy and Economics discusses the role of transportation energy and vehicle markets on a national (and even international) scale. For example, Figures 11 through 13 discuss the connections between global oil prices and U.S. GDP, and Figures 20 and 21 show U.S. employment in the automotive sector. The following section examines Light-Duty Vehicle use, markets, manufacture, and supply chains. Figures 26 through 33 offer snapshots of major light-duty vehicle brands in the U.S. and Figures 38 through 43 examine the performance and efficiency characteristics of vehicles sold. The discussion of Medium and

  3. Potencial de produção de energia eólica em parques offshore

    OpenAIRE

    Moreira, Sérgio Emanuel Carvalho; Almeida, Tiago António de Sousa

    2013-01-01

    A produção de energia eólica é essencial para o cumprimento dos objetivos europeus, no âmbito das energias renováveis. De acordo com as previsões da União Europeia (UE), a produção hidroelétrica irá manter a sua posição dominante como fonte de energia renovável para a produção de energia elétrica. No entanto, o uso da energia eólica irá continuar a expandir e, em 2020 a capacidade eólica instalada deverá superar o setor hidroelétrico [1]. O setor eólico offshore começa...

  4. PERSPECTIVAS DE INSERÇÃO DA ENERGIA SOLAR FOTOVOLTAICA NA GERAÇÃO DE ENERGIA ELÉTRICA NO RIO GRANDE DO NORTE

    OpenAIRE

    Augusto César Fialho Wanderley; Antonio Luiz P. Siqueira Campos

    2013-01-01

    A geração de energia elétrica no Brasil é predominantemente renovável, com a geração interna hidráulica sendo superior a 74% do total de sua matriz energética. O racionamento de energia elétrica ocorrido em 2001, devido à falta de chuvas, levou o país a incrementar a participação de fontes alternativas de energia. Esta necessidade por novas fontes de energia faz com que as potencialidades regionais sejam aproveitadas, o que configura a mudança do modelo de geração, passando de geração central...

  5. TTÜ energia- ja sisekliimalabor : energiasääst passiivse arhitektuurilise jahutuse ja/või küttemeetodite kavandamise abil / Hendrik Voll, Teolan Tomson

    Index Scriptorium Estoniae

    Voll, Hendrik

    2010-01-01

    TTÜ ehitusteaduskonna kütte ja ventilatsiooni õppetoolis valmis energia- ja sisekliima labor, mille spetsiaalsed päikesekiirguse ja hajuvalguse stendid aitavad inseneridel ja arhitektidel parandada energiasimulatsiooniprogrammide kasutusoskusi

  6. Robust Vehicle Suspension System by Converting Active & Passive Control of a Vehicle to Semi-Active Control System Analytically

    OpenAIRE

    Hassan Elahi; Dr. Riffat Asim Pasha; Dr. Asif Israr; Dr. M. Zubair Khan

    2014-01-01

    In this research work a simplified translational model of an automotive suspension system is constructed by only considering the translation motion of one wheel of a car. Passive Vehicle Suspension System is converted into Semi Active Vehicle System. Major advantage achieved by this system is that it adjusts the damping of the suspension system without the application of any actuator by using MATLAB® simulations. The semi-active control is found to control the vibration of suspens...

  7. Laser metrology — a diagnostic tool in automotive development processes

    Science.gov (United States)

    Beeck, Manfred-Andreas; Hentschel, Werner

    2000-08-01

    Laser measurement techniques are widely used in automotive development processes. Applications at Volkswagen are presented where laser metrology works as a diagnostic tool for analysing and optimising complex coupled processes inside and between automotive components and structures such as the reduction of a vehicle's interior or outer acoustic noise, including brake noise, and the combustion analysis for diesel and gasoline engines to further reduce fuel consumption and pollution. Pulsed electronic speckle pattern interferometry (ESPI) and holographic interferometry are used for analysing the knocking behaviour of modern engines and for correct positioning of knocking sensors. Holographic interferometry shows up the vibrational behaviour of brake components and their interaction during braking, and allows optimisation for noise-free brake systems. Scanning laser vibrometry analyses structure-born noise of a whole car body for the optimisation of its interior acoustical behaviour.Modern engine combustion concepts such as in direct-injection (DI) gasoline and diesel engines benefit from laser diagnostic tools which permit deeper insight into the in-cylinder processes such as flow generation, fuel injection and spray formation, atomisation and mixing, ignition and combustion, and formation and reduction of pollutants. The necessary optical access inside a cylinder is realised by so-called 'transparent engines' allowing measurements nearly during the whole engine cycle. Measurement techniques and results on double-pulse particle image velocimetry (PIV) with a frequency-doubled YAG laser for in-cylinder flow analysis are presented, as well as Mie-scattering on droplets using a copper vapour laser combined with high-speed filming, and laser-induced fluorescence (LIF) with an excimer laser for spray and fuel vapour analysis.

  8. Technical Efficiency of Automotive Industry Cluster in Chennai

    Science.gov (United States)

    Bhaskaran, E.

    2012-07-01

    Chennai is also called as Detroit of India due to its automotive industry presence producing over 40 % of the India's vehicle and components. During 2001-2002, diagnostic study was conducted on the Automotive Component Industries (ACI) in Ambattur Industrial Estate, Chennai and in SWOT analysis it was found that it had faced problems on infrastructure, technology, procurement, production and marketing. In the year 2004-2005 under the cluster development approach (CDA), they formed Chennai auto cluster, under public private partnership concept, received grant from Government of India, Government of Tamil Nadu, Ambattur Municipality, bank loans and stake holders. This results development in infrastructure, technology, procurement, production and marketing interrelationships among ACI. The objective is to determine the correlation coefficient, regression equation, technical efficiency, peer weights, slack variables and return to scale of cluster before and after the CDA. The methodology adopted is collection of primary data from ACI and analyzing using data envelopment analysis (DEA) of input oriented Banker-Charnes-Cooper model. There is significant increase in correlation coefficient and the regression analysis reveals that for one percent increase in employment and net worth, the gross output increases significantly after the CDA. The DEA solver gives the technical efficiency of ACI by taking shift, employment, net worth as input data and quality, gross output and export ratio as output data. From the technical score and ranking of ACI, it is found that there is significant increase in technical efficiency of ACI when compared to CDA. The slack variables obtained clearly reveals the excess employment and net worth and no shortage of gross output. To conclude there is increase in technical efficiency of not only Chennai auto cluster in general but also Chennai auto components industries in particular.

  9. Reliability of lead-calcium automotive batteries in practical operations

    Science.gov (United States)

    Burghoff, H.-G.; Richter, G.

    In order to reach a statistically sound conclusion on the suitability of maintenance-free, lead-calcium automotive batteries for practical operations, the failure behaviour of such batteries has been observed in a large-scale experiment carried out by Mercedes Benz AG and Robert Bosch GmbH in different climatic zones of North America. The results show that the average failure behaviour is not significantly different to that of batteries from other manufacturers using other grid alloy systems and operated under otherwise identical conditions; the cumulative failure probability after 30 months is 17%. The principal causes of failure are: (i) early failure: transport damage, filling errors, and short-circuits due to the outer plates being pushed up during plate-block assembly (manufacturing defect); (ii) statistical failure: short-circuits due to growth of positive plates caused by a reduction in the mechanical strength of the cast positive grid as a result of corrosion; (iii) late failure due to an increased occurrence of short-circuits, especially frequent in outer cell facing the engine of the vehicle (subjected to high temperature), and to defects caused by capacity decay. As expected, the batteries exhibit extremely low water loss in each cell. The poor cyclical performance of stationary batteries, caused by acid stratification and well-known from laboratory tests, has no detrimental effect on the batteries in use. After a thorough analysis of the corrosion process, the battery manufacturer changed the grid alloy and the method of its production, and thus limited the corrosion problem with cast lead-calcium grids and with it the possibility of plate growth. The mathematical methods used in this study, and in particular the characteristic factors derived from them, have proven useful for assessing the suitability of automotive batteries.

  10. Vehicle to Vehicle Services

    DEFF Research Database (Denmark)

    Brønsted, Jeppe Rørbæk

    2008-01-01

    location aware infotainment, increase safety, and lessen environmental strain. This dissertation is about service oriented architecture for pervasive computing with an emphasis on vehicle to vehicle applications. If devices are exposed as services, applications can be created by composing a set of services...... connectivity, mobility, and availability of services. The dissertation consists of two parts. Part I gives an overview of service oriented architecture for pervasive computing systems and describes the contributions of the publications listed in part II. We investigate architecture for vehicular technology...... and governing the flow of data among them. In pervasive computing, composing services is, however, not the whole story. To fully realize their potential, applications must also deal with challenges such as device heterogeneity, context awareness, openendedness, and resilience to dynamism in network...

  11. KIT EDUCACIONAL PARA ESTUDO DE GERAÇÃO ELÉTRICA A PARTIR DE ENERGIA EÓLICA

    OpenAIRE

    Antonio Luiz P. S. Campos; Aécio Vinícius Amorim Farias; Débora Raiane Farias de Azevedo Fernande; Felipe José Santana de Sales; Francelio Ferreira; Juliana Ramos da Silva; Manassés Albuquerque de Sousa Melo

    2010-01-01

    Vários estudos desenvolvidos nos últimos anos apontam para as implicações e impactos sócio-ambientais do consumo de energia. Fontes de energias renováveis são apresentadas como alternativa para atender as demandas da sociedade com qualidade, segurança e redução dos danos ambientais decorrentes do consumo de energia. Este artigo apresenta uma proposta de kit educacional para ensino do uso de energia eólica na geração de energia elétrica. Inicialmente, o artigo descreve a evolução do aproveitam...

  12. Research progress of aluminum alloy automotive sheet and application technology

    Institute of Scientific and Technical Information of China (English)

    Ma Mingtu; You Jianghai; Lu Hongzhou; Wang Zhiwen

    2012-01-01

    Pretrcatment technology is deeply discussed to explain its importance in guaranteeing properties and form- ability of aluminum alloy automotive sheet. Some typical applications of aluminum alloy automotive sheet to automotive industry are listed. Based on the author's knowledge and recognition and research progress presently, the important re- search contents about aluminum alloy automotive sheet are emphasized. Reducing cost and price of sheet and going deeply into application research are the main work for expending the application of aluminum alloy automotive sheet in the automobile.

  13. Cradle-to-Gate Impact Assessment of a High-Pressure Die-Casting Safety-Relevant Automotive Component

    Science.gov (United States)

    Cecchel, Silvia; Cornacchia, Giovanna; Panvini, Andrea

    2016-08-01

    The mass of automotive components has a direct influence on several aspects of vehicle performance, including both fuel consumption and tailpipe emissions, but the real environmental benefit has to be evaluated considering the entire life of the products with a proper life cycle assessment. In this context, the present paper analyzes the environmental burden connected to the production of a safety-relevant aluminum high-pressure die-casting component for commercial vehicles (a suspension cross-beam) considering all the phases connected to its manufacture. The focus on aluminum high-pressure die casting reflects the current trend of the industry and its high energy consumption. This work shows a new method that deeply analyzes every single step of the component's production through the implementation of a wide database of primary data collected thanks to collaborations of some automotive supplier companies. This energy analysis shows significant environmental benefits of aluminum recycling.

  14. Innovative applications of cars connectivity network – way to intelligent vehicle

    OpenAIRE

    Milan Kovac; Andrea Leskova

    2012-01-01

    The presented article focuses on characteristic of possibilities to use of ICT tools in automotive traffic. There are specified selected potentialities for a network connected to automotive integration in near future. There is also considerable innovation in the field of Internet-enabled in-car systems. In this contribution we want illustrating affects of Internet networking in automobiles by examples of applications. The goal is to present conceptual model of vehicle connected to external in...

  15. Degradation of automotive materials in palm biodiesel

    International Nuclear Information System (INIS)

    As compared to petroleum diesel, biodiesel is more corrosive for automotive materials. Studies on the characterization of corrosion products of fuel exposed automotive materials are scarce. Automotive fuel system and engine components are made from different ferrous and non-ferrous materials. The present study aims to investigate the corrosion products of different types of automotive materials such as copper, brass, aluminum and cast iron upon exposure to diesel and palm biodiesel. Changes in fuel properties due to exposure of different materials were also examined. Degradation of metal surface was characterized by digital camera, SEM/EDS and X-ray diffraction (XRD). Fuel properties were examined by measuring TAN (total acid number), density and viscosity. Among the metal investigated, copper is found to be least resistant in biodiesel and formed comparatively more corrosion products than other metals. Upon exposure of metals in biodiesel, TAN number crosses the limit given by standard while density and viscosity remain within the acceptable range of limit. -- Highlights: ► Order of incompatible metals in palm biodiesel: copper > brass > aluminum > cast iron. ► The possible reactions for the degradation of copper and cast iron have been discussed. ► For metal exposed biodiesel, only TAN number crosses the limit while density and viscosity remain within the limit. ► Copper and copper based alloy (brass) increase TAN number comparatively more than other metals.

  16. Automotive Stirling engine development program: A success

    Science.gov (United States)

    Tabata, W. K.

    1987-01-01

    The original 5-yr Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

  17. Plastic optical fibers for automotive applications

    Science.gov (United States)

    Suganuma, Heiroku; Matsunaga, Tadayo

    1991-12-01

    High heat resistant optical fibers (POFs) have been developed for various automotive applications. Plastic chips with POF light guide have been used in place of a clearance monitor lamp. POF cords and cables have been used in the car-audio system, car-navigation system, and other data communication systems. This paper describes the structures, properties, and reliabilities of POFs for these applications.

  18. 78 FR 36633 - National Automotive Sampling System

    Science.gov (United States)

    2013-06-18

    ... complete Privacy Act statement in the Federal Register published on April 11, 2000 (65 FR 19477-78) or you... 21, 2012, NHTSA published a Federal Register notice (77 FR 37471-72) soliciting comments from NASS... National Highway Traffic Safety Administration National Automotive Sampling System AGENCY: National...

  19. Automotive gear oil lubricant from soybean oil

    Science.gov (United States)

    The use of lubricants that are based on renewable materials is rapidly increasing. Vegetable oils have good lubricity, wear protection and low volatility which are desired properties for automotive gear lubricant applications. Soybean oil is used widely in the lubricant industry due to its properti...

  20. A listening test system for automotive audio

    DEFF Research Database (Denmark)

    Christensen, Flemming; Geoff, Martin; Minnaar, Pauli;

    2005-01-01

    This paper describes a system for simulating automotive audio through headphones for the purposes of conducting listening experiments in the laboratory. The system is based on binaural technology and consists of a component for reproducing the sound of the audio system itself and a component for...

  1. Metrics for Automotive Merchandising, Petroleum Marketing.

    Science.gov (United States)

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of students in automotive merchandising and petroleum marketing classes, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know…

  2. An Evaluation of 3D Woven Orthogonal Composites' Potential in the Automotive Supply Chain

    Science.gov (United States)

    Taylor, Dalia

    The automotive supply chain and its management can be a very complex process and comprises a long dynamic and complex network that consists of four primary segments: original equipment manufacturers (OEMs), first tier suppliers, sub tiers suppliers, and infrastructure suppliers. During the analysis of the current automotive industry it was identified that textile industry importance is considerable increasing as a part of the global automotive supply chain, because textile products are used for interior, exterior and even suspension parts and components. Automotive industry has an increasing demand for higher quality exterior panels with better functional properties and reduced weight. One of the main potentials for this demand is based on the three-dimensional woven composites technology innovations which can replace an existing technology. The new role of the textile industry could make important changes in the automotive supply chain industry, such as: changes in the size of the supply chain, the time to the market and the position of textile industry in the automotive supply chain structure. 3D composite materials from high performance fibers, such as glass and carbon, have been used for automotive applications in a limited way due to the low production rate and the lack of research and development. This research will contribute to the understanding of textile composites in transportation and the textile parameters that affect the performance characteristics of these materials. The research examines the performance characteristics of lighter and stronger 3D woven fabric composites made from fiberglass with the aim to improve fuel efficiency by reducing the total vehicle weight while maintaining safety standards. The performance characteristics of the 3D woven fabric composite can be designed by changing different construction parameters, such as picks density, pick roving linear density, arrangements of warp and z-yarns, and the number of warp and picks layers

  3. RedeGasEnergia - gas and energy excellence network: a strategy for development the Brazilian natural gas market; RedeGasEnergia - rede de excelencia de gas e energia: uma estrategia para o desenvolvimento do mercado do gas natural no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Antonio L.F. dos [PETROBRAS, Rio de Janeiro, RJ (Brazil). Gerencia de Tecnologia do Gas Natural; Freire, Luiz G.M. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Coordenacao de Tecnologia da RedeGasEnergia

    2004-07-01

    The present work aims at to present a new methodology of Excellency Net of Natural Gas - RedeGasEnergia for the development do natural gas market no Brazil, through in the application do model management for technologies associates different segments da economy: residential, commercial, industrial, Vehicle and of cogeneration, in accord with the Strategical Planning of the PETROBRAS. The developed methodology is based on the interaction enters the technological lines of direction of the segments of the economy and marketing lines of direction, inside of a corporative environment enters the some agents of the productive chain of the Natural Gas, which is: University, the delivering and transporting Institutions of Research and Technologies (technological arm) and companies of NG, municipal, state and federal equipment manufacturers (enterprise arm) and agencies, trade associations (governmental arm) to which of integrated and articulated form carry through a sustainable development of the Natural Gas market in Brazil. A study of case of the methodology will be shown, from the analysis of the current scenes of the use of the natural gas in light vehicles and weighed, locomotives and boats, as well as the available infrastructure for the Vehicle applications. (author)

  4. Effect of turbulence in modeling the reduction of local drag forces in a computational automotive model

    Directory of Open Access Journals (Sweden)

    Sanwar A. Sunny

    2011-11-01

    Full Text Available In this computational fluid dynamic (CFD study on vehicle drag forces sheds light on the mathematical algorithms utilized to converge on pertinent data useful in the design and manufacture of automobiles. COSMOS Floworks™ was used to model the virtual vehicle motion involving various governing flow equations with main attention given to turbulent behavior in incompressible fluid flows. The paper highlighted Navier-Stokes considerations in the study and introduced Reynolds Decomposition methods to generate more refined models which in turn give accurate results, such as Reynolds-Averaged Navier–Stokes (RANS Equations and Large Eddy Simulation (LES Techniques, introduced using the Einstein Notation. Recent developments in Coherent vortex simulation methods were also briefly discussed. Example modeling and tests were conducted to show automotive design improvements that resulted in a 8.57% improvement in local drag forces (FD at the rear wheel wells, which effectively reduces the required Horsepower (hp of the vehicle traveling at a certain speed (7.24 %. Different 3-D Automotive Design Models were examined in the current study, where real life design considerations and design benefits applications were briefly discussed. Furthermore, the paper highlights the need for utilization of both computational and real flow analysis on the car body and future performance relationship with the car’s body weight, material and design.

  5. 2013 Vehicle Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Stacy Cagle [ORNL; Williams, Susan E [ORNL; Boundy, Robert Gary [ORNL; Moore, Sheila A [ORNL

    2014-03-01

    This is the fifth edition of this report, which details the major trends in U.S. light-duty vehicle and medium/heavy truck markets as well as the underlying trends that caused them. This report is supported by the U.S. Department of Energy s (DOE) Vehicle Technologies Office (VTO), and, in accord with its mission, pays special attention to the progress of high-efficiency and alternative-fuel technologies. After opening with a discussion of energy and economics, this report features a section each on the light-duty vehicle and heavy/medium truck markets, and concluding with a section each on technology and policy. The first section on Energy and Economics discusses the role of transportation energy and vehicle markets on a national (and even international) scale. For example, Figures 12 through 14 discuss the connections between global oil prices and U.S. GDP, and Figures 21 and 22 show U.S. employment in the automotive sector. The following section examines Light-Duty Vehicle use, markets, manufacture, and supply chains. Figures 24 through 51 offer snapshots of major light-duty vehicle brands in the U.S. and Figures 56 through 64 examine the performance and efficiency characteristics of vehicles sold. The discussion of Medium and Heavy Trucks offers information on truck sales (Figures 73 through 75) and fuel use (Figures 78 through 81). The Technology section offers information on alternative fuel vehicles and infrastructure (Figures 84 through 95), and the Policy section concludes with information on recent, current, and near-future Federal policies like the Corporate Average Fuel Economy standard (Figures 106 through 110). In total, the information contained in this report is intended to communicate a fairly complete understanding of U.S. highway transportation energy through a series of easily digestible nuggets.

  6. Evaluating knowledge benefits of automotive lightweighting materials R&D projects.

    Science.gov (United States)

    Peretz, Jean H; Das, Sujit; Tonn, Bruce E

    2009-08-01

    This paper presents a set of metrics used to evaluate short-run knowledge benefits that accrued from research and development (R&D) projects funded in fiscal years 2000-2004 by automotive lightweighting materials (ALM) of the U.S. Department of Energy (DOE). Although DOE presents to Congress energy, environmental, and security benefits and costs of its R&D efforts under the Government Performance and Results Act, DOE has yet to include knowledge benefits in that report [U.S. Department of Energy. (2007). Projected benefits of federal energy efficiency and renewable energy programs: FY2008 budget request. NREL/TP-640-41347 (March). Washington, DC: National Renewable Energy Laboratory for DOE Energy Efficiency and Renewable Energy. Retrieved February 12, 2007 from http://www1.eere.energy.gov/ba/pba/2008_benefits.html]. ALM focuses on development and validation of advanced technologies that significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost [U.S. Department of Energy. (2005a). Automotive lightweighting materials 2004 annual progress report. Washington, DC: DOE Energy Efficiency and Renewable Energy. Retrieved March 30, 2005 from http://www.eere.energy.gov/vehiclesandfuels/resources/fcvt_alm_fy04.shtml]. The ultimate goal of ALM to have lightweighter materials in vehicles hinges on many issues, including the (1) collaborative nature of ALMs R&D with the automobile industry and (2) manufacturing knowledge gained through the R&D effort. The ALM projects evaluated in this paper yielded numerous knowledge benefits in the short run. While these knowledge benefits are impressive, there remains uncertainty about whether the research will lead to incorporation of lightweight materials by the Big Three automakers into their manufacturing process and introduction of lightweight vehicles into the marketplace. The uncertainty illustrates a difference between (1) knowledge

  7. Recycling end-of-life vehicles of the future. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Jody, B. J.; Pomykala, J. A.; Spangenberger, J. S.; Daniels, E.; Energy Systems

    2010-01-14

    Argonne National Laboratory (the Contractor) entered into a Cooperative Research and Development Agreement (CRADA) with the following Participants: Vehicle Recycling Partnership, LLC (VRP, which consists of General Motors [GM], Ford, and Chrysler), and the American Chemistry Council - Plastics Division (ACC-PD). The purpose of this CRADA is to provide for the effective recycling of automotive materials. The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use of advanced lightweighting materials or systems in future vehicles. The issues, technical requirements, and cost and institutional considerations in achieving that goal are complex and will require a concerted, focused, and systematic analysis, together with a technology development program. The scope and tasks of this program are derived from 'A Roadmap for Recycling End-of-Life Vehicles of the Future,' prepared in May 2001 for the DOE Office of Energy, Efficiency, and Renewable Energy (EERE)-Vehicle Technologies Program. The objective of this research program is to enable the maximum recycling of automotive materials and obsolete vehicles through the development and commercialization of technologies for the separation and recovery of materials from end-of-life vehicles (ELVs). The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use

  8. An empirical comparison of real-time dense stereo aproaches for use in the automotive environment.

    OpenAIRE

    Mroz, F.; Breckon, T. P.

    2012-01-01

    In this work we evaluate the use of several real-time dense stereo algorithms as a passive 3D sensing technology for potential use as part of a driver assistance system or autonomous vehicle guidance. A key limitation in prior work in this area is that although significant comparative work has been done on dense stereo algorithms using de facto laboratory test sets only limited work has been done on evaluation in real world environments such as that found in potential automotive usage. This c...

  9. Standard Work Study in Physical Logistics Area: An Application of Automotive Equipment Manufacturer

    Directory of Open Access Journals (Sweden)

    Çağla Özkardeş, Seda Erkılıç, Cansu Şakar, Cansu Aras, Aslı Aksoy* , Nursel Öztürk

    2013-09-01

    Full Text Available Products are transported from depot to workstations and between workstations by milk-run vehicles in an automotive equipment manufacturer’s plant. Milk-run operators were completing routes earlier than anticipated time for each path in current state, and, also, transported quantities were non-standard. Manufacturer aims to optimization and standardization of milk-run tours. This paper presents suggestions to get over existing problems of a manufacturer. Finally, workload acquisition was obtained with the results of the suggestions

  10. Computerized Simulation of Automotive Air-Conditioning System: A Parametric Study

    OpenAIRE

    Haslinda Mohamed Kamar; Nazri Kamsah; Mohd Yusoff Senawi

    2013-01-01

    This paper presents results of a parametric study performed on an automotive air-conditioning (AAC) system of a passenger car. The goals are to assess the effects of varying the volumetric flow rate of supply air, number of occupants, vehicle speed, and the fractional ventilation air intake (XOA), on the dry-bulb temperature and specific humidity of the air inside the passengers cabin, and on the evaporator coil cooling load of the AAC system. Results of the parametric study show that increas...

  11. A Multiphase Traction/Fast-Battery-Charger Drive for Electric or Plug-in Hybrid Vehicles

    OpenAIRE

    Sandulescu, Paul; KESTELYN, Xavier; SEMAIL, Eric; BRUYERE, Antoine; Bouchez, Boris; Sousa, Luis

    2010-01-01

    For Electric Vehicles (EV), the charger is one of the main technical and economical weaknesses. This paper focuses on an original electric drive [1]-[3] dedicated to the vehicle traction and configurable as a battery charger without need of additional components. This cheap solution can outfit either electric or plug-in hybrid automotive vehicles, without needing additional mass and volume dedicated to the charger. Moreover, it allows a high charging power, for short duration charge cycles. H...

  12. Design and Implementation of a Control System for Testing an Experimental Electrical Vehicle

    OpenAIRE

    Miranda Bermejo, Jorge

    2010-01-01

    The Research Institute of Vehicle Engines and Automotive Engineering (IVK) at the University of Stuttgart is developing an experimental electric vehicle. With that vehicle different research topics in the scope of e-mobility will be investigated. Some of these topics are range prediction and optimization issues, adapted control of inverter and electric motor, as well as, different battery charging techniques. The aim of this master thesis is to design and to implement the contr...

  13. Energy Losses for Propelling and Braking Conditions of an Electric Vehicle

    OpenAIRE

    Gantt, Lynn Rupert

    2011-01-01

    The market segment of hybrid-electric and full function electric vehicles is growing within the automotive transportation sector. While many papers exist concerning fuel economy or fuel consumption and the limitations of conventional powertrains, little published work is available for vehicles which use grid electricity as an energy source for propulsion. Generally, the emphasis is put solely on the average drive cycle efficiency for the vehicle with very little thought given to propelling ...

  14. Multi-Physic Modeling and Simulation of a Hybrid Vehicle with Range Extender

    Directory of Open Access Journals (Sweden)

    Nissrine MHAITI*,

    2014-04-01

    Full Text Available As the global economy begins to strain under the pressure of raising petroleum prices and environmental concerns, automobile manufacturers constantly strive to produce more fuel efficient and environmentally friendly vehicles. That’s why mechatronic sophistication in automotive vehicles is increasing. Given the current resources and technologies, the most feasible solution is hybrid electric vehicles (HEV. HEVs can be organized into three classes: parallel, series and power-split hybrids.

  15. Electric and Hybrid Vehicle Technology: TOPTEC

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance of today's electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between refueling'' stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.

  16. Electric and Hybrid Vehicle Technology: TOPTEC

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance of today`s electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between ``refueling`` stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of ``Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.

  17. A demanda por energia elétrica no Brasil

    Directory of Open Access Journals (Sweden)

    Cristiane Alkmin Junqueira Schmidt

    2004-03-01

    Full Text Available O objetivo do presente trabalho é estimar, por cointegração, as elasticidades, preço e renda, de longo prazo da demanda por energia elétrica nas três classes de consumo: residencial, comercial e industrial. Os resultados obtidos estão de acordo com outros resultados empíricos de que a elasticidade-renda deve ser igual ou superior à unidade e que a elasticidade-preço deve ter uma magnitude inferior a um, em módulo. Além disso são realizadas previsões para o consumo de energia elétrica para o período de 2001 a 2005.The purpose of the present study is to estimate, by cointegration, the long-run elasticities, mainly the price and income, of the demand for electric energy in the three consumption categories: residential, commercial and industrial. The obtained results support the premise that the income elasticity should be near or beyond a unity, and that the magnitude of price-elasticity should be lower one, in terms of absolute value. Predictions for the electric energy consumption for the 2001-2005 period are also made

  18. AGT-102 automotive gas turbine

    Science.gov (United States)

    1981-01-01

    Development of a gas turbine powertrain with a 30% fuel economy improvement over a comparable S1 reciprocating engine, operation within 0.41 HC, 3.4 CO, and 0.40 NOx grams per mile emissions levels, and ability to use a variety of alternate fuels is summarized. The powertrain concept consists of a single-shaft engine with a ceramic inner shell for containment of hot gasses and support of twin regenerators. It uses a fixed-geometry, lean, premixed, prevaporized combustor, and a ceramic radial turbine rotor supported by an air-lubricated journal bearing. The engine is coupled to the vehicle through a widerange continuously variable transmission, which utilizes gearing and a variable-ratio metal compression belt. A response assist flywheel is used to achieve acceptable levels of engine response. The package offers a 100 lb weight advantage in a Chrysler K Car front-wheel-drive installation. Initial layout studies, preliminary transient thermal analysis, ceramic inner housing structural analysis, and detailed performance analysis were carried out for the basic engine.

  19. Minema kupatatud nõukoguliikmed: Eesti Energia projektid kukkusid läbi / Dannar Leitmaa

    Index Scriptorium Estoniae

    Leitmaa, Dannar, 1982-

    2011-01-01

    Majandus- ja kommunikatsiooniminister Juhan Parts otsustas Eesti Energia nõukogu liikme kohalt tagasi kutsuda Aivar Reiviku ning Rein Kuusmiku, kes olid vastu Eesti Energia üle viie miljoni euro suurusele investeeringule Weroli rapsiõlitehase juurde rajatavasse elektri- ja küttejaama. Uuteks nõukogu liikmeteks said Andres Saame ja Toomas Tauts. Majandus- ja kommunikatsiooniministeerium peab tagandatud nõukoguliikmete väiteid, et Eesti Energia juhtkond käitub omanikust riigiga omatahtsi ja peab endiselt plaani siirduda börsile, absurdiks. Ministeerium: ei mingit IPO-t

  20. Caracterização do potencial de energia eólica na Beira Interior

    OpenAIRE

    Correia, Francisco Manuel Serra

    2010-01-01

    O presente Relatório de Mestrado em Engenharia Electromecânica pretende avaliar e caracterizar o potencial de energia eólica na Beira Interior (Portugal). Para isso, irão ser analisadas as capacidades instaladas de produção de energia eólica, bem como os respectivos potenciais na região referida. Atendendo a esta proliferação dos sistemas de produção de energia apoiados na força do vento é necessário conhecer, optimizar e inovar os procedimentos que se relacionam com a produ...

  1. Marketing Communications Plan for the Electricity Sales of Pori Energia OY

    OpenAIRE

    Laine, Janette

    2012-01-01

    The purpose of this thesis was to create an enhanced marketing communications plan for a local electricity seller Pori Energia Oy. With the help of the new plan, it was desired that Pori Energia would improve its company image and increase its clientele. In addition, possible new ways to store and follow-up the plan were considered. Pori Energia felt that their marketing communications plan, as it was at present, was not serving the company in the right way. Their current plan had some de...

  2. Cenário actual das energias renováveis em Portugal

    OpenAIRE

    Cunha, Daniela Sá

    2008-01-01

    O cenário actual das energias origem fósseis provou ser insustentável. A preocupação constante com o nosso planeta, o aumento constante do preço petróleo, assim como de outras fontes de energias poluentes, faz com que as energias renováveis sejam a solução mais vantajosa e rentável. Tendo em vista a procura insistente por soluções que salvaguardem o nosso planeta, é cada vez mais importante explorar os meios e matérias-primas existentes de maneira a retirar maior partido daq...

  3. Kompensointi Outokummun energia Oy:n sähköverkossa

    OpenAIRE

    Malinen, Petteri

    2016-01-01

    Opinnäytetyön tavoitteena oli selvittää maasulun kompensoinnin toiminta Outokummun energia Oy:n sähköverkossa. Opinnäytetyön toimeksiantajana toimi Outokummun Energia Oy. Outokummun energia Oy:n sähköverkko sijaitsee Outokummun kaupungin taajama-alueella se-kä haja-asutusalueella. Outokummun energialla on neljä sähköasemaa. Työssä paneuduttiin vain kolmeen Ruuttu 1, Ruuttu 2 ja Vuonos 1 sähköasemiin. Työssä selvitettiin laskemalla kolmella sähköasemalla olevat maasulkuvirrat. Maasulku...

  4. Hybrid Automotive Engine Using Ethanol-Burning Miller Cycle

    Science.gov (United States)

    Weinstein, Leonard

    2004-01-01

    A proposed hybrid (internal-combustion/ electric) automotive engine system would include as its internal-combustion subsystem, a modified Miller-cycle engine with regenerative air preheating and with autoignition like that of a Diesel engine. The fuel would be ethanol and would be burned lean to ensure complete combustion. Although the proposed engine would have a relatively low power-to-weight ratio compared to most present engines, this would not be the problem encountered if this engine were used in a non-hybrid system since hybrid systems require significantly lower power and thus smaller engines than purely internal-combustion-engine-driven vehicles. The disadvantage would be offset by the advantages of high fuel efficiency, low emission of nitrogen oxides and particulate pollutants, and the fact that ethanol is a renewable fuel. The original Miller-cycle engine, named after its inventor, was patented in the 1940s and is the basis of engines used in some modern automobiles, but is not widely known. In somewhat oversimplified terms, the main difference between a Miller-cycle engine and a common (Otto-cycle) automobile engine is that the Miller-cycle engine has a longer expansion stroke while retaining the shorter compression stroke. This is accomplished by leaving the intake valve open for part of the compression stroke, whereas in the Otto cycle engine, the intake valve is kept closed during the entire compression stroke. This greater expansion ratio makes it possible to extract more energy from the combustion process without expending more energy for compression. The net result is greater efficiency. In the proposed engine, the regenerative preheating would be effected by running the intake air through a heat exchanger connected to the engine block. The regenerative preheating would offer two advantages: It would ensure reliable autoignition during operation at low ambient temperature and would help to cool the engine, thereby reducing the remainder of the

  5. Automotion of domain walls for spintronic interconnects

    Science.gov (United States)

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A.

    2014-06-01

    We simulate "automotion," the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20 nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  6. Automotion of domain walls for spintronic interconnects

    International Nuclear Information System (INIS)

    We simulate “automotion,” the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20 nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  7. Platform Based Design for Automotive Sensor Conditioning

    CERN Document Server

    Fanucci, L; Iozzi, F; Marino, C; Rocchi, A

    2011-01-01

    In this paper a general architecture suitable to interface several kinds of sensors for automotive applications is presented. A platform based design approach is pursued to improve system performance while minimizing time-to-market.. The platform is composed by an analog front-end and a digital section. The latter is based on a microcontroller core (8051 IP by Oregano) plus a set of dedicated hardware dedicated to the complex signal processing required for sensor conditioning. The microcontroller handles also the communication with external devices (as a PC) for data output and fast prototyping. A case study is presented concerning the conditioning of a Gyro yaw rate sensor for automotive applications. Measured performance results outperform current state-of-the-art commercial devices.

  8. Automotion of domain walls for spintronic interconnects

    Energy Technology Data Exchange (ETDEWEB)

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A. [Exploratory Integrated Circuits, Components Research, Intel Corp., Hillsboro, Oregon 97124 (United States)

    2014-06-07

    We simulate “automotion,” the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20 nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  9. Tribocharging behaviour of automotive powder coatings

    Science.gov (United States)

    Thomas, Aline; Saleh, Khashayar; Guigon, Pierre; Czechowski, Claire

    2008-12-01

    The aim of this work was to build a device allowing the measurement of tribocharging during the fluidization and pneumatic transport of automotive powder coatings. The experimental setup included a fluidization unit, a transport pipe and two 'Faraday cups' allowing continuous monitoring of particle charge. Two batches of industrial automotive powder primers, as well as several other types of powders were tested: alumina, silica... The experimental variables were the length of the conveying pipe and the air flow rate. The results showed that the net amount of acquired tribocharge increases with the length of conveying pipe. The experimental device and procedure allowed to well classify tested powders according to their rate of tribocharging and their maximum charge. More specially, this study pointed out a net difference between electrostatic properties of two powder primers, which behave very differently in the industrial application unit.

  10. Ultrahigh carbon steel for automotive applications

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.; Syn, C.K. [Lawrence Livermore National Lab., CA (United States); Sherby, O.D. [Stanford Univ., CA (United States)

    1995-12-04

    Ultrahigh carbon steels (UHCSs), which contain 1--2.1% carbon, have remarkable structural properties for automotive application when processed to achieve fine ferrite grains with fine spheroidized carbides. When processed for high room temperature ductility, UHCS can have good tensile ductility but significantly higher strength than current automotive high strength steels. The material can also be made superplastic at intermediate temperatures and exhibits excellent die fill capability. Furthermore, they can be made hard with high compression ductility. In wire form it is projected that UHCS can exhibit extremely high strengths (5,000 MPa) for tire cord applications. Examples of structural components that have been formed from fine-grained spheroidized UHCSs are illustrated.

  11. Analysis of the Transition to Hydrogen Fuel Cell Vehicles and the Potential Hydrogen Energy Infrastructure Requirements, March 2008

    Energy Technology Data Exchange (ETDEWEB)

    Greene, David L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Leiby, Paul N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); James, Brian [Directed Technologies, Inc., Youngstown, OH (United States); Perez, Julie [Directed Technologies, Inc., Youngstown, OH (United States); Melendez, Margo [National Renewable Energy Lab. (NREL), Golden, CO (United States); Milbrandt, Anelia [National Renewable Energy Lab. (NREL), Golden, CO (United States); Unnash, Stefan [Life Cycle Associates, Portola Valley, CA (United States); Rutherford, Daniel [Life Cycle Associates, Portola Valley, CA (United States); Hooks, Matthew [TIAX, LLC, Lexingtion, MA (United States)

    2008-03-14

    Achieving a successful transition to hydrogen-powered vehicles in the U.S. automotive market will require strong and sustained commitment by hydrogen producers, vehicle manufacturers, transporters and retailers, consumers, and governments. The interaction of these agents in the marketplace will determine the real costs and benefits of early market transformation policies, and ultimately the success of the transition itself.

  12. Fmcw Mmw Radar For Automotive Longitudinal Control

    OpenAIRE

    David, William

    1997-01-01

    This report presents information on millimeter wave (MMW) radar for automotive longitudinal control. It addresses the fundamental capabilities and limitations of millimeter waves for ranging and contrasts their operation with that of conventional microwave radar. The report analyzes pulsed and FMCW radar configurations, and provides detailed treatment of FMCW radar operating at MMW frequency, its advantages and disadvantages as they relate to range and velocity measurements.

  13. INNOVATION LEAN PRINCIPLES IN AUTOMOTIVE GREEN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Dušan Sabadka

    2014-12-01

    Full Text Available Today, industries such as automotive and manufacturing industries deal with a lot of environmental regulations. Lean is a production strategy whose fundamental principles drive the industry towards a more effective production of goods and services. The eco-efficiency concept is primary to sustainable development and intends to provide more value with less environmental impact. The aim of this study is to identify and explore the contributions of Lean to reduce environmental impacts that naturally result from industrial activity.

  14. TECHNOLOGICAL MEASURES TO IMPROVE AUTOMOTIVE PRODUCT QUALITY

    OpenAIRE

    Gladkov, V.; Kruglov, S.

    2010-01-01

    The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

  15. Visual configuration in automotive software product lines

    OpenAIRE

    Botterweck, Goetz; Thiel, Steffen; Crawley, Ciar??n; Nestor, Daren; PreuBner, Andr??

    2008-01-01

    peer-reviewed Software Product Line engineering has emerged as a viable and important software development paradigm in the automotive industry. It allows companies to realise significant improvements in time-to-market, cost, productivity, and system quality. One major difficulty with software product line engineering is related to the fact that a product line of industrial size can easily incorporate thousands of variation points. This scale of variability can become extremely com...

  16. Assembly-oriented design in automotive engineering

    OpenAIRE

    Vielhaber, Michael; Burr, Holger; Deubel, Till; Weber, Christian; Haasis, Siegmar

    2004-01-01

    To be competitive on the global market, carmakers have cut lead times in passenger car development to the bone. At the same time both the product complexity and the customer's demands with regard to quality are continuously rising. Various new strategies and tools are currently being explored to cope with these challenges: simultaneous/concurrent engineering, front-loaded development, and knowledge-/feature-based parametric design to name just a few. Current design processes in automotive eng...

  17. Automotion of Domain Walls for Spintronic Interconnects

    OpenAIRE

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A.

    2013-01-01

    We simulate automotion, the spontaneous transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate with only a transient current pulse and provide favorable scaling down to the 20nm scale. Cases of both in-plane and perpendicular magnetization are considered. Analytical dependence of the velocity of domain walls on ...

  18. General Motors automotive fuel cell program

    Energy Technology Data Exchange (ETDEWEB)

    Fronk, M.H.

    1995-08-01

    The objectives of the second phase of the GM/DOE fuel cell program is to develop and test a 30 kW fuel cell powerplant. This powerplant will be based on a methanol fuel processor and a proton exchange membrane PM fuel cell stack. In addition, the 10 kW system developed during phase I will be used as a {open_quotes}mule{close_quotes} to test automotive components and other ancillaries, needed for transient operation.

  19. Brazilian automotive industry in the nineties

    OpenAIRE

    Cecchini, Kerlyng; Guilhoto, Joaquim José Martins; GEOFFREY J.D. HEWINGS; Chokri, Dridi

    2007-01-01

    This paper aims to carry out an analysis of fuzzy clusters in the Brazilian automotive industry to contribute to the analysis of the relative importance of these economic activities in the national productive structure and in their regional contexts. The intention is to assess whether, once they have been established in the structure of a determined region, the economic activities of the industry establish productive relationships similar to other industries to the point of leading an indust...

  20. Analysis of the automotive supplier industry

    OpenAIRE

    Fejtková Drgová, Michaela

    2014-01-01

    The subject of this thesis is "Analysis of suppliers in automotive industry“. The processes of purchasing department are analyzed from the supplier´s selection to his evaluation. The work is divided into the theoretical and the practical parts. The practical part is to define the basic concepts linked with the purchasing area. The part goals are executed in the practical part and the purchasing procedures of Keihin Company are deeply described. Outcome of this thesis is a proposal to effectiv...

  1. Green competitiveness research on Chinese automotive enterprises

    OpenAIRE

    Yuanhui Li

    2014-01-01

    Purpose: More and more executives of automobileindustry in China start to recognize the concept of green competitiveness recently. However, relatively less research attention has been devoted to the consideration of measurement. This paper aims to find empirical approach to quantify green competitiveness for automotive enterprises. The connotation of green competitiveness is explored and one suite of evaluation index system has been proposed with four dimensions including environmental, resou...

  2. Design Patterns of Timed Automotive Systems

    OpenAIRE

    Aghav, Jagannath; Petitpierre, Claude

    2003-01-01

    The functional complexity of hardware and software systems is growing exponentially. This demands an integration of system validation in the design phase to guarantee that a concrete implementation conforms to the modeled requirements. System validation process involves use of advanced systematic techniques and tools. In this report we present design patterns of timed automotive systems and a method for validating the real-time behavioral patterns of control intensive applications. The ...

  3. Electrohydraulic Forming of Light Weight Automotive Panels

    OpenAIRE

    Mamutov, A. V.; Golovashchenko, S. F.; Bonnen, J. J.; Gillard, A. J.; Dawson, S. A.; Maison, L.

    2016-01-01

    This paper describes the results of development of the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology. EHF is an electro-dynamic process based upon high-voltage discharge of capacitors between two electrodes positioned in a fluid-filled chamber. This process is extremely fast, uses lowercost single-sided tooling, and potentially derives significantly increased formability from many sheet metal materials due to the elevated s...

  4. Characterization of three-way automotive catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kenik, E.A.; More, K.L. [Oak Ridge National Lab., TN (United States); LaBarge, W. [Delphi Automotive Systems, Flint, MI (United States)] [and others

    1997-04-01

    The CRADA between Delphi Automotive Systems (Delphi; formerly General Motors - AC Delco, Systems) and Lockheed Martin Energy Research (LMER) on automotive catalysts was completed at the end of FY96, after a ten month, no-cost extension. The CRADA was aimed at improved performance and lifetime of noble metal based three-way-catalysts (TWC), which are the primary catalytic system for automotive emission control systems. While these TWC can meet the currently required emission standards, higher than optimum noble metal loadings are often required to meet lifetime requirements. In addition, more stringent emission standards will be imposed in the near future, demanding improved performance and service life from these catalysts. Understanding the changes of TWC conversion efficiency with ageing is a critical need in improving these catalysts. Initially in a fresh catalyst, the active material is often distributed on a very fine scale, approaching single atoms or small atomic clusters. As such, a wide range of analytical techniques have been employed to provide high spatial resolution characterization of the evolving state of the catalytic material.

  5. Advanced Cost Functions for Evaluation of Lateral Vehicle Dynamics

    Czech Academy of Sciences Publication Activity Database

    Ivanov, V.; Augsburg, K.; Savitski, D.; Plíhal, Jiří; Nedoma, P.; Machan, J.

    Berlin: Springer, 2013, s. 425-440. (Lecture Notes in Electrical Engineering. 198). ISBN 978-3-642-33794-9. [FISITA 2012 World Automotive Congress. Beijing (CN), 27.11.2012-30.11.2012] Grant ostatní: Škoda AUTO a.s.(CZ) 6002 Institutional support: RVO:67985556 Keywords : vehicle dynamics * cost functions * stability * vehicle weighting factors * simulation Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering http://library.utia.cas.cz/separaty/2013/AS/plihal-advanced cost functions for evaluation of lateral vehicle dynamics.pdf

  6. POTENTIAL USE OF MAGNESIUM ALLOYS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kudret KANDEMİR

    2003-01-01

    Full Text Available Recently, there is a high interest in using lightweight materials for automotive applications where weight reduction and improvement in comfort are needed. Magnesium alloys with excellent specific strength and stiffness properties can be comparable with steel and aluminum alloys for applications in the automotive industry. For this reason, the properties of magnesium alloys are in the focus of research. This study aims at reviewing and evaluating the prospects of magnesium alloys use and applications in the automotive industry.

  7. AUTOMOTIVE MARKET- FROM A GENERAL TO A MARKET SEGMENTATION APPROACH

    OpenAIRE

    Liviana Andreea Niminet

    2014-01-01

    Automotive market and its corresponding industry are undoubtedly of outmost importance and therefore proper market segmentation is crucial for market players, potential competitors and customers as well. Time has proved that market economic analysis often shown flaws in determining the relevant market, by using solely or mainly the geographic aspect and disregarding the importance of segments on the automotive market. For these reasons we propose a new approach of the automotive market provin...

  8. The role of software engineering in future automotive systems development

    OpenAIRE

    Clarke, Siobhán; Fitzgerald, Brian; Nixon, Paddy; Pohl, Klaus; Ryan, Kevin; Sinclair, David; Thiel, Steffen

    2008-01-01

    peer-reviewed The amount and complexity of software in automotive systems is constantly increasing. Today’s luxury cars include numerous electronic control units. A large part of the functionality of these units is driven by software. In the future even more software-intensive automotive systems are expected as automotive manufacturers and suppliers tend to integrate and combine applications on more powerful platforms. The increasing amount and complexity of software in these plat...

  9. Program Evaluation - Automotive Lightweighting Materials Program Research and Development Projects Assessment of Benefits - Case Studies No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.

    2003-01-23

    This report is the second of a series of studies to evaluate research and development (R&D) projects funded by the Automotive Lightweighting Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The objectives of the program evaluation are to assess short-run outputs and long-run outcomes that may be attributable to the ALM R&D projects. The ALM program focuses on the development and validation of advanced technologies that significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. Funded projects range from fundamental materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R&D projects were chosen for this evaluation: Design and Product Optimization for Cast Light Metals, Durability of Lightweight Composite Structures, and Rapid Tooling for Functional Prototyping of Metal Mold Processes. These projects were chosen because they have already been completed. The first project resulted in development of a comprehensive cast light metal property database, an automotive application design guide, computerized predictive models, process monitoring sensors, and quality assurance methods. The second project, the durability of lightweight composite structures, produced durability-based design criteria documents, predictive models for creep deformation, and minimum test requirements and suggested test methods for establishing durability properties and characteristics of random glass-fiber composites for automotive structural composites. The durability project supported Focal Project II, a validation activity that demonstrates ALM program goals and reduces the lead time for bringing new technology into the marketplace. Focal

  10. Wastes to Reduce Emissions from Automotive Diesel Engines

    Directory of Open Access Journals (Sweden)

    Manuel Jiménez Aguilar

    2014-01-01

    Full Text Available The objective of the study was actually the investigation of the effect of various treatments on the ability of urine in absorbing greenhouse gases. Urine alone or mixed with olive-oil-mill waste waters (O, poultry litter (P, or sewage sludge (S was used on the absorption of CO2 and NOx from diesel exhaust. The absorption coefficient (0.98–0.29 g CO2/grNH4 was similar to other solvents such as ammonia and amines. The ranges of CO2 absorption(1.7–5.6 g/l and NO reduction (0.9–3.7 g/l in six hours indicate that on average 20 litres of urine could be needed to capture CO2 and NOx vehicle emissions from each covered kilometre. The best results of CO2 absorption and NOx reduction were for urine mixed with O, P and urine alone. These wastes could be used to capture CO2 and NOx from automotive diesel engines to reduce gas emissions. The proposed strategy requires further research to increase CO2 absorption and reduce the risks associated with waste-water reuse.

  11. Similarity Matching Techniques For Fault Diagnosis In Automotive Infotainment Electronics

    Directory of Open Access Journals (Sweden)

    Mashud Kabir

    2009-08-01

    Full Text Available Fault diagnosis has become a very important area of research during the last decade due to the advancement of mechanical and electrical systems in industries. The automobile is a crucial field where fault diagnosis is given a special attention. Due to the increasing complexity and newly added features in vehicles, a comprehensive study has to be performed in order to achieve an appropriate diagnosis model. A diagnosis system is capable of identifying the faults of a system by investigating the observable effects (or symptoms. The system categorizes the fault into a diagnosis class and identifies a probable cause based on the supplied fault symptoms. Fault categorization and identification are done using similarity matching techniques. The development of diagnosis classes is done by making use of previous experience, knowledge or information within an application area. The necessary information used may come from several sources of knowledge, such as from system analysis. In this paper similarity matching techniques for fault diagnosis in automotive infotainment applications are discussed.

  12. Modular PM Motor Drives for Automotive Traction Applications

    International Nuclear Information System (INIS)

    This paper presents modular permanent magnet (PM) motor drives for automotive traction applications. A partially modularized drive system consisting of a single PM motor and multiple inverters is described. The motor has multiple three-phase stator winding sets and each winding set is driven with a separate three-phase inverter module. A truly modularized inverter and motor configuration based on an axial-gap PM motor is then introduced, in which identical PM motor modules are mounted on a common shaft and each motor module is powered by a separate inverter module. The advantages of the modular approach for both inverter and motor include: (1) power rating scalability-one design meets different power requirements by simply stacking an adequate number of modules, thus avoiding redesigning and reducing the development cost, (2) increased fault tolerance, and (3) easy repairing. A prototype was constructed by using two inverters and an axial-gap PM motor with two sets of three-phase stat or windings, and it is used to assist the diesel engine in a hybrid electric vehicle converted from a Chevrolet Suburban. The effect of different pulse-width-modulation strategies for both motoring and regenerative modes on current control is analyzed. Torque and regenerative control algorithms are implemented with a digital signal processor. Analytical and initial testing results are included in the paper

  13. Start-up analysis for automotive PEM fuel cell systems

    Science.gov (United States)

    De Francesco, M.; Arato, E.

    The development of fuel cell cars can play an important role in resolving transport problems, due to the high environmental compatibility and high efficiency of this kind of vehicle. Among the different types of fuel cells, proton-exchange membrane fuel cells (PEMFCs) are considered the best solution for automotive applications at the moment. In this work, constructive criteria are discussed with the aim of obtaining a power generation module adaptable to a wide range of cars. A particular problem in accomplishing the overall project is represented by the definition of the compressor system for air feeding. In this work, the design approach to the problem will be delineated: some options are reviewed and the best solution is analysed. The transient response of the system (fuel cell and compressor) is investigated in order to optimise the start-up running through a model of a fuel cell stack and a compressor simulation. The model and its results are proposed as a work procedure to solve the problem, by varying external conditions: in fact, to perform the system start-up under stable conditions, the air relative humidity and temperature must be maintained in a proper range of values. The approach here presented has been utilised for the definition of the characteristics of the power module and layout of a middle-size hybrid city bus in the framework of a project promoted by the European Union.

  14. Gas sensing using porous materials for automotive applications.

    Science.gov (United States)

    Wales, Dominic J; Grand, Julien; Ting, Valeska P; Burke, Richard D; Edler, Karen J; Bowen, Chris R; Mintova, Svetlana; Burrows, Andrew D

    2015-07-01

    Improvements in the efficiency of combustion within a vehicle can lead to reductions in the emission of harmful pollutants and increased fuel efficiency. Gas sensors have a role to play in this process, since they can provide real time feedback to vehicular fuel and emissions management systems as well as reducing the discrepancy between emissions observed in factory tests and 'real world' scenarios. In this review we survey the current state-of-the-art in using porous materials for sensing the gases relevant to automotive emissions. Two broad classes of porous material - zeolites and metal-organic frameworks (MOFs) - are introduced, and their potential for gas sensing is discussed. The adsorptive, spectroscopic and electronic techniques for sensing gases using porous materials are summarised. Examples of the use of zeolites and MOFs in the sensing of water vapour, oxygen, NOx, carbon monoxide and carbon dioxide, hydrocarbons and volatile organic compounds, ammonia, hydrogen sulfide, sulfur dioxide and hydrogen are then detailed. Both types of porous material (zeolites and MOFs) reveal great promise for the fabrication of sensors for exhaust gases and vapours due to high selectivity and sensitivity. The size and shape selectivity of the zeolite and MOF materials are controlled by variation of pore dimensions, chemical composition (hydrophilicity/hydrophobicity), crystal size and orientation, thus enabling detection and differentiation between different gases and vapours. PMID:25982991

  15. Dimensionamento de sistemas de produção de electricidade baseados em energia solar fotovoltaica

    OpenAIRE

    Alves, Vítor Alexandre Moreira

    2012-01-01

    Estágio realizado na Jayme da Costa e orientado pelo Eng.º Francisco Ribeiro Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores - Major Energia. Faculdade de Engenharia. Universidade do Porto. 2008

  16. Eesti Energia müüb ettevõtte juhtkond / Andres Reimer

    Index Scriptorium Estoniae

    Reimer, Andres

    2000-01-01

    Valitsus kavatseb määrata Narva Elektrijaamade enamusaktsiate müüjaks USA energeetikakontsernile NRG Energy Eesti Energia juhatuse esimehe Gunnar Oki. Ilmunud ka: Delovõje Vedomosti 12. jaan. lk. 6

  17. Energia ja sisekliima labor aitab parandada arhitektide ja inseneride koostööd / Hendrik Voll

    Index Scriptorium Estoniae

    Voll, Hendrik

    2010-01-01

    TTÜ ehitusteaduskonna kütte ja ventilatsiooni õppetoolis valmis energia ja sisekliima labor, mille spetsiaalsed päikesekiirguse ja hajuvalguse stendid aitavad inseneridel ja arhitektidel parandada energiasimulatsiooniprogrammide kasutusoskusi

  18. Disseny d’un baden recol·lector d’energia

    OpenAIRE

    Sanfeliu i Bosch, David

    2013-01-01

    La demanda creixent d’energia elèctrica i la destrucció del medi ambient, han impulsat a la investigació de noves formes de generar energia. En aquest projecte, es fa especial interès al “Energy Harvesting” o recol·lecció d’energia. S’estudia el “Energy Harvesting” a través de generadors piezoelèctrics, els quals generen càrregues elèctriques al ser deformats mecànicament. Com a objectiu principal es dissenya un sistema per aconseguir recol·lectar la energia mecànica que els vehic...

  19. Eesti Energia korraldas OSELCA projekti raames Tallinnas rahvusvahelise seminari / Reigo Lehtla

    Index Scriptorium Estoniae

    Lehtla, Reigo

    2005-01-01

    Eesti Energia AS korraldas 12.-13. septembrini 2005. a. Tallinna Tehnikaülikooli energeetikahoones rahvusvahelise seminari olelusringi hindamise (Life Cycle Assessment) metoodika hetkeseisust Ida-Euroopa regioonis

  20. Mobile Crowd Sensing for Traffic Prediction in Internet of Vehicles

    Directory of Open Access Journals (Sweden)

    Jiafu Wan

    2016-01-01

    Full Text Available The advances in wireless communication techniques, mobile cloud computing, automotive and intelligent terminal technology are driving the evolution of vehicle ad hoc networks into the Internet of Vehicles (IoV paradigm. This leads to a change in the vehicle routing problem from a calculation based on static data towards real-time traffic prediction. In this paper, we first address the taxonomy of cloud-assisted IoV from the viewpoint of the service relationship between cloud computing and IoV. Then, we review the traditional traffic prediction approached used by both Vehicle to Infrastructure (V2I and Vehicle to Vehicle (V2V communications. On this basis, we propose a mobile crowd sensing technology to support the creation of dynamic route choices for drivers wishing to avoid congestion. Experiments were carried out to verify the proposed approaches. Finally, we discuss the outlook of reliable traffic prediction.

  1. Mobile Crowd Sensing for Traffic Prediction in Internet of Vehicles.

    Science.gov (United States)

    Wan, Jiafu; Liu, Jianqi; Shao, Zehui; Vasilakos, Athanasios V; Imran, Muhammad; Zhou, Keliang

    2016-01-01

    The advances in wireless communication techniques, mobile cloud computing, automotive and intelligent terminal technology are driving the evolution of vehicle ad hoc networks into the Internet of Vehicles (IoV) paradigm. This leads to a change in the vehicle routing problem from a calculation based on static data towards real-time traffic prediction. In this paper, we first address the taxonomy of cloud-assisted IoV from the viewpoint of the service relationship between cloud computing and IoV. Then, we review the traditional traffic prediction approached used by both Vehicle to Infrastructure (V2I) and Vehicle to Vehicle (V2V) communications. On this basis, we propose a mobile crowd sensing technology to support the creation of dynamic route choices for drivers wishing to avoid congestion. Experiments were carried out to verify the proposed approaches. Finally, we discuss the outlook of reliable traffic prediction. PMID:26761013

  2. Electric vehicles

    Science.gov (United States)

    1990-03-01

    Quiet, clean, and efficient, electric vehicles (EVs) may someday become a practical mode of transportation for the general public. Electric vehicles can provide many advantages for the nation's environment and energy supply because they run on electricity, which can be produced from many sources of energy such as coal, natural gas, uranium, and hydropower. These vehicles offer fuel versatility to the transportation sector, which depends almost solely on oil for its energy needs. Electric vehicles are any mode of transportation operated by a motor that receives electricity from a battery or fuel cell. EVs come in all shapes and sizes and may be used for different tasks. Some EVs are small and simple, such as golf carts and electric wheel chairs. Others are larger and more complex, such as automobile and vans. Some EVs, such as fork lifts, are used in industries. In this fact sheet, we will discuss mostly automobiles and vans. There are also variations on electric vehicles, such as hybrid vehicles and solar-powered vehicles. Hybrid vehicles use electricity as their primary source of energy, however, they also use a backup source of energy, such as gasoline, methanol or ethanol. Solar-powered vehicles are electric vehicles that use photovoltaic cells (cells that convert solar energy to electricity) rather than utility-supplied electricity to recharge the batteries. These concepts are discussed.

  3. Life cycle analysis and choice of natural gas-based automotive alternative fuels in Chongqing Municipality,China

    Institute of Scientific and Technical Information of China (English)

    WU Rui; LI Guangyi; ZHANG Zongyi; REN Yulong; HAN Weijian

    2007-01-01

    Road transport produces significant amounts of emissions by using crude oil as the primary energy source.A reduction of emissions can be achieved by implementing alternative fuel chains.The objective of this study is to carry out an economic,environmental and energy (EEE) life cycle study on natural gas-based automotive fuels with conventional gasoline in an abundant region of China.A set of indices of four fuels/vehicle systems on the basis of life cycle are assessed in terms of impact of EEE,in which natural gas produces compressed natural gas (CNG),methanol,dimethylether (DME) and Fischer Tropsch diesel (FTD).The study included fuel production,vehicle production,vehicle operation,infrastructure and vehicle end of life as a system for each fuel/vehicle system.A generic gasoline fueled car is used as a baseline.Data have been reviewed and modified based on the best knowledge available to Chongqing local sources.Results indicated that when we could not change electric and hydrogen fuel cell vehicles into commercial vehicles on a large scale,direct use of CNG in a dedicated or bi-fuel vehicle is an economical choice for the region which is most energy efficient and more environmental friendly.The study can be used to support decisions on how natural gas resources can best be utilized as a fuel/energy resource for automobiles,and what issues need to be resolved in Chongqing.The models and approaches for this study can be applied to other regions of China as long as all the assumptions are well defined and modified to find a substitute automotive energy source and establish an energy policy in a specific region.

  4. Impact of system parameter selection on radar sensor performance in automotive applications

    OpenAIRE

    Blöecher, H.-L.; Andres, M; Fischer, C.; Sailer, A.; Goppelt, M.; J. Dickmann

    2012-01-01

    The paper deals with the investigation of relevant boundary conditions to be considered in order to operate 77/79 GHz narrow and ultra wide band automotive radar sensors in the automotive platform and the automotive environment.

  5. 75 FR 11938 - Meridian Automotive Systems, Grand Rapids, MI; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Meridian Automotive Systems, Grand Rapids, MI; Notice of Termination... Meridian Automotive Systems, Grand Rapids, Michigan (Meridian Automotive). The petitioning group of...

  6. Present Situation of Purification Technologies for Automotive Exhaust in China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    It is presented that eliminating and controlling the current automotive exhaust emission should be important and urgent in China, and the Chinese state emission standards have been getting stricter and stricter. Also the present purification technologies for automotive exhaust are elucidated. It is indicated that the development and the commercialization of Rare Earth based on three way catalytic converters is pretty necessary and urgent to address the current harsh automotive exhaust emission problems in China. In addition, the future automotive exhaust purification technologies are prospected.

  7. AUTOMOTIVE MARKET- FROM A GENERAL TO A MARKET SEGMENTATION APPROACH

    Directory of Open Access Journals (Sweden)

    Liviana Andreea Niminet

    2014-01-01

    Full Text Available Automotive market and its corresponding industry are undoubtedly of outmost importance and therefore proper market segmentation is crucial for market players, potential competitors and customers as well. Time has proved that market economic analysis often shown flaws in determining the relevant market, by using solely or mainly the geographic aspect and disregarding the importance of segments on the automotive market. For these reasons we propose a new approach of the automotive market proving the importance of proper market segmentation and defining the strategic groups within the automotive market.

  8. Offshoring trends in the manufacturing process within the automotive industry

    DEFF Research Database (Denmark)

    Simplay, S.; Hansen, Zaza Nadja Lee

    2014-01-01

    This paper investigates offshoring trends in the automotive industry. The research approach consisted of combining empirical findings from case companies with latest research from the field. Empirical data was collected through case studies from 15 automotive organisations based in Europe...... consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development...... with a focus on offshoring in the automotive industry and provides practitioners with information on a cutting-edge trend to the industry...

  9. The Ciudad Universitaria and the energy; La ciudad universitaria y la energia

    Energy Technology Data Exchange (ETDEWEB)

    Arriola Valdes, Eduardo; Villanueva Moreno, Carlos; Alvarez Watkins, Pablo [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

    2006-08-15

    The fundamental intention of the macro project La Ciudad Universitaria y la Energia is to turn to the university campus of the Universidad Nacional Autonoma de Mexico (UNAM) into a model of intelligent use of the different necessary forms of energy for the satisfaction of its necessities. In order to do so, the macro project is sustained in six lines of investigation and development: Solar energy, energy from biomass; hydrogen energy; diagnosis and energy saving; use and energy saving; and energy culture. The macro project is framed in an effort of the UNAM to foment the trans-disciplinary collaboration and therefore, under the coordination of the Faculty of Engineering the following university dependencies participate in this persistence: Faculty of Sciences; Faculty of Chemistry; Faculty of Architecture; Faculty of Accountants and Administration; Faculty of Economy; FES Aragon; Institute of Engineering; Institute of Geophysics; Institute of Physics; Research Center in Energy; Center of Applied Sciences and Technological Development. For that intention, in the period the 2005-2007 the Trans-disciplinary Program in Investigation and Development for Faculties and Schools of the UNAM will contribute with 30 million pesos to the macro project La Ciudad Universitaria y la Energia. [Spanish] El proposito fundamental del macroproyecto La Ciudad Universitaria y la Energia es el convertir al campus universitario de la Universidad Nacional Autonoma de Mexico (UNAM) en un modelo de utilizacion inteligente de las diferentes formas de energia necesarias para la satisfaccion de sus necesidades. Para lograrlo, el macroproyecto se sustenta en las seis lineas de investigacion y desarrollo: Energia solar, energia de biomasa; energia del hidrogeno; diagnostico y ahorro de energia; utilizacion y ahorro de energia; y cultura energetica. El macroproyecto se enmarca en un esfuerzo de la UNAM por fomentar la colaboracion transdisciplinaria y por tanto, bajo la coordinacion de la Facultad

  10. Eesti Energia kuulutas naabritele elektrisõja / Toivo Tänavsuu

    Index Scriptorium Estoniae

    Tänavsuu, Toivo

    2008-01-01

    Eesti Energia plaanib Läti ja Leedu kohtusse anda, kui läbirääkimised ei too lahendust. Sandor Liive peab oluliseks, et EL kehtestaks tollimaksu Vene elektrile. Käimas on lobitöö Põhjamaade elektribörsi laiendamiseks Eestisse 2009. aastast, mis tooks siia avatud turu läbipaistva hinnakujunduse; peetakse reaalseks, et Eesti Energia võib saada äriosaluse kavandatavas Olkiluoto 6. reaktoris. Lisa: Elektri hind võib 1. jaanuarist kahekordistuda

  11. Modeling and verification of a lithium iron phosphate battery pack system for automotive applications

    Science.gov (United States)

    Guo, Lin

    In recent years, Lithium chemistry based batteries have gained popularity with all automotive manufacturers. Thousands of battery cells are put into a battery pack to satisfy the need of power consumption of vehicles using electric traction. Managing the battery pack for hybrid and electric vehicles is a challenging problem. Despite the advantage of power density and charge retaining capabilities, Lithium ion batteries do not handle over-charge and over-discharge very well compared to other battery chemistries. Therefore, creating an accurate model to predict the battery pack behavior is essential in research and development for battery management systems. This work presents a general technique to extend accepted modeling methodologies for single cells to models for large packs. The theoretical framework is accompanied by parameter identification process based on the circuit model, and experimental verification procedures supporting the validity of this approach.

  12. Evaluation of Performance and Opportunities for Improvements in Automotive Power Electronics Systems: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Gilberto; Bennion, Kevin; King, Charles; Narumanchi, Sreekant

    2016-06-14

    Thermal management strategies for automotive power electronic systems have evolved over time to reduce system cost and to improve reliability and thermal performance. In this study, we characterized the power electronic thermal management systems of two electric-drive vehicles--the 2012 Nissan LEAF and 2014 Honda Accord Hybrid. Tests were conducted to measure the insulated-gate bipolar transistor-to-coolant thermal resistances for both steady-state and transient conditions at various coolant flow rates. Water-ethylene glycol at a temperature of 65 degrees C was used as the coolant for these experiments. Computational fluid dynamics and finite element analysis models of the vehicle's power electronics thermal management system were then created and validated using experimentally obtained results. Results indicate that the Accord module provides lower steady-state thermal resistance as compared with the LEAF module. However, the LEAF design may provide improved performance in transient conditions and may have cost benefits.

  13. Statistical sensor fusion of ECG data using automotive-grade sensors

    Science.gov (United States)

    Koenig, A.; Rehg, T.; Rasshofer, R.

    2015-11-01

    Driver states such as fatigue, stress, aggression, distraction or even medical emergencies continue to be yield to severe mistakes in driving and promote accidents. A pathway towards improving driver state assessment can be found in psycho-physiological measures to directly quantify the driver's state from physiological recordings. Although heart rate is a well-established physiological variable that reflects cognitive stress, obtaining heart rate contactless and reliably is a challenging task in an automotive environment. Our aim was to investigate, how sensory fusion of two automotive grade sensors would influence the accuracy of automatic classification of cognitive stress levels. We induced cognitive stress in subjects and estimated levels from their heart rate signals, acquired from automotive ready ECG sensors. Using signal quality indices and Kalman filters, we were able to decrease Root Mean Squared Error (RMSE) of heart rate recordings by 10 beats per minute. We then trained a neural network to classify the cognitive workload state of subjects from heart rate and compared classification performance for ground truth, the individual sensors and the fused heart rate signal. We obtained an increase of 5 % higher correct classification by fusing signals as compared to individual sensors, staying only 4 % below the maximally possible classification accuracy from ground truth. These results are a first step towards real world applications of psycho-physiological measurements in vehicle settings. Future implementations of driver state modeling will be able to draw from a larger pool of data sources, such as additional physiological values or vehicle related data, which can be expected to drive classification to significantly higher values.

  14. Modelling of modern automotive petrol engine performance using Support Vector Machines

    Institute of Scientific and Technical Information of China (English)

    VONG Chi-man; WONG Pak-kin; LI Yi-ping; HO Chon-meng

    2005-01-01

    Modern automotive petrol engine performance is significantly affected by effective tune-up. Current practice of engine tune-up relies on the experience of the automotive engineer, and tune-up is usually done by trial-and-error method and then the vehicle engine is run on the dynamometer to show the actual engine performance. Obviously the current practice involves a large amount of time and money, and then may even fail to tune up the engine optimally because a formal performance model of the engine has not been determined yet. With an emerging technique, Support Vector Machines (SVM), the approximate performance model of a petrol vehicle engine can be determined by training the sample engine performance data acquired from the dynamometer. The number of dynamometer tests for an engine tune-up can therefore be reduced because the estimated engine performance model can replace the dynamometer tests to a certain extent. In this paper, the construction, validation and accuracy of the model are discussed. The study showed that the predicted results agree well with the actual test results. To illustrate the significance of the SVM methodology, the results were also compared with that regressed using multilayer feedforward neural networks.

  15. Favonius, farola alimentada per energia eòlica

    OpenAIRE

    Prat Pueyo, Ricard

    2011-01-01

    Aquest projecte desenvolupa el disseny, la fabricació i l’emplaçament d’una turbina eòlica d’eix vertical que funciona com a font d’energia elèctrica per a petits consums. Aquesta iniciativa sorgeix amb el propòsit d’aprofitar el recurs eòlic i aportar alternatives a l’ús de combustibles fòssils o d’altres energies menys netes. L’objectiu del projecte és dissenyar una turbina eòlica que generi 120 W de potència i que sigui capaç de satisfer aquest consum també a baixes velocitats ...

  16. EL ALTO MAGDALENA- COLOMBIA DE LA MANO CON ENERGIAS ALTERNATIVAS

    Directory of Open Access Journals (Sweden)

    Barragán-Alturo, Ancízar

    2013-12-01

    Full Text Available El afán por destruir un paradigma, que mantiene encadenados a los habitantes de Girardot y la región, a una compañía de distribución de la energía eléctrica con sus altos precios para el kilowatt-hora, ha inspirado la investigación CUNDINAMARCA DE LA MANO DE LAS ENERGIAS ALTERNATIVAS, demostrando por diversos caminos que el montaje de paneles solares para generación de energía eléctrica en las cubiertas de las casas es la energía alternativa para la solución de diversos problemas, entre ellos: los costos elevados, las fluctuaciones de voltaje, los cortes de energía, los daños en los electrodomésticos

  17. A qualidade da energia eléctrica na actualidade e o uso de novas tecnologias reparadoras

    OpenAIRE

    Delgado, Joaquim Duarte Barroca; Saraiva, Pedro A.; Almeida, Aníbal Traça de

    2000-01-01

    A qualidade da energia eléctrica constitui na actualidade um factor crucial para a competitividade de praticamente todos os sectores industriais e dos serviços. A partir do levantamento de necessidades, esta comunicação analisa algumas das novas tecnologias armazenadoras de energia e o seu papel na implementação de equipamentos com maior grau de imunidade a perturbações na qualidade da energia eléctrica ("Ride Through Capability").

  18. Energy saving plan: use of solar energy in the university of Valencia (Spain); Uso de la energia solar en la universidad de Valencia (Espana) para ahorrar energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Gomez Amo, J.L.; Tena, F.; Martinez Lozano, J.A.; Utrillas, M.P. [Grupo de Radiacion Solar, Universidad de Valencia (Spain)

    2005-07-15

    The University of Valencia financed a pilot project that would study the installation's feasibility of a generating station with photovoltaic energy, solar type, in order to replace or complement conventional sources of energy. This paper presents some of the preliminary results of the study's application in an University building, along with the analysis of the initial situation and the proposals for the handling of reactive energy and the outer and inner lighting as solutions for energy saving. This experimental project entitled Study of the Energy Saving Strategies and the Viability of Installing Solar Energy equipment in the Buildings of the University of Valencia throws preliminary data specifying the amount of investment necessary to obtain real annual benefits, as well as the recovery time of the investment and the beneficial ecological impact in quantitative terms of a measurable CO{sub 2} reduction. [Spanish] La Universidad de Valencia financio un proyecto piloto que estudiaria la factibilidad de instalacion de una estacion generadora de energia fotovoltaica de tipo solar para sustituir o complementar fuentes convencionales de energia. Este trabajo presenta algunos de los resultados preliminares de la aplicacion del estudio en un edificio de la Universidad junto con el analisis de la situacion inicial y las propuestas del manejo de energia reactiva, de iluminacion exterior e interior como soluciones para el ahorro de energia. Este proyecto experimental titulado Estudio de las estrategias del ahorro de la energia y de la viabilidad de instalar energia solar en los edificios de la Universidad de Valencia arroja datos preliminares que especifican el monto de la inversion necesaria para obtener beneficios anuales reales, asi como el tiempo de recuperacion de la inversion y el impacto ecologico benefico en terminos cuantitativos de una reduccion cuantificable de CO{sub 2}.

  19. PERSPECTIVAS DE INSERÇÃO DA ENERGIA SOLAR FOTOVOLTAICA NA GERAÇÃO DE ENERGIA ELÉTRICA NO RIO GRANDE DO NORTE

    Directory of Open Access Journals (Sweden)

    Augusto César Fialho Wanderley

    2013-08-01

    Full Text Available A geração de energia elétrica no Brasil é predominantemente renovável, com a geração interna hidráulica sendo superior a 74% do total de sua matriz energética. O racionamento de energia elétrica ocorrido em 2001, devido à falta de chuvas, levou o país a incrementar a participação de fontes alternativas de energia. Esta necessidade por novas fontes de energia faz com que as potencialidades regionais sejam aproveitadas, o que configura a mudança do modelo de geração, passando de geração centralizada para geração distribuída. Dentre as fontes alternativas de energia, a solar apresenta-se como uma fonte bastante promissora para o Brasil, tendo em vista que a maior parte do seu território está localizada próximo à linha do equador, o que acarreta em um dia de maior duração solar. O Rio Grande do Norte (RN tem um dos maiores índices de incidência solar do território brasileiro, o que o torna apto a receber investimentos para a instalação de usinas solares fotovoltaicas. Este artigo analisará o potencial de geração da energia solar fotovoltaica no RN através de medições solarimétricas realizadas em Natal, capital do estado.

  20. Energy saving programs and renewable energies in Chihuahua, Mexico; Programas de ahorro de energia y energias renovables en Chihuahua, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Ibarra Noris, Jose Luis [Gobierno del Estado de Chihuahua (Mexico)

    2005-07-01

    The high index of economic and technological growth registered in the border zone of northern Mexico in the last years, has simultaneously caused an annual growth in the electrical energy demand in a percentage higher than 6%. In this document are included the economic and environmental impacts caused by the projects developed in the Chihuahua State on energy efficiency and on the available potential of renewable energies. In order to evaluate the environmental impact that is caused when saving electrical energy in the diverse projects in process, the emission of CO{sub 2} is the only emission taken into account (even though also emissions of SO{sub 2}, NO{sub 2} and Hg exist) for being this polluting agent the one that contributes in greater amount to the global warming and the greenhouse effect. The emission index of CO{sub 2} that we considered in this presentation is of 600 kg/mwh, on the basis of the type of fuel and volume of generation of the plants in operation of the Comision Federal de Electricidad (CFE) in the Chihuahua State. [Spanish] El alto indice de crecimiento economico y tecnologico registrado en la zona fronteriza del norte de Mexico en los ultimos anos, ha ocasionado paralelamente un crecimiento en la demanda de energia electrica superior al 6% anual. En este documento se incluyen los impactos economicos y ambientales de los proyectos que se desarrollan en el estado de Chihuahua en eficiencia energetica y en el potencial que se tiene de energias renovables. Para evaluar el impacto ambiental que se obtiene al ahorrar energia electrica en los diversos proyectos en proceso, se toma en cuenta unicamente emisiones de CO{sub 2} (aun cuando tambien existen emisiones de SO{sub 2}, NO{sub 2} y Hg) por ser este el contaminante que en mayor cantidad afecta al calentamiento global y al efecto invernadero. El indice de emisiones de CO{sub 2} que consideramos en esta presentacion es de 600 kg/mwh, en base al tipo de combustible y volumen de generacion de las

  1. Development and performance measurement of micro-power pack using micro-gas turbine driven automotive alternators

    International Nuclear Information System (INIS)

    Highlights: ► We develop micro-power pack using automotive alternator and micro-gas turbine. ► We measure rotordynamic and power generation performance of micro-power pack. ► Micro-power pack shows dramatic increases in mass and volumetric power densities. ► Test results assure feasibility of micro-power pack for electric vehicles. -- Abstract: This paper presents the development of a micro-power pack using automotive alternators powered by a micro-gas turbine (MGT) to recharge battery packs, in particular for electric vehicles (EVs). The thermodynamic efficiency for the MGT with the power turbine is estimated from a simple Brayton cycle analysis. The rotordynamic and power generation performance of the MGT driven alternator was measured during a series of experiments under electrical no-loading and loading conditions, and with belt-pulley and flexible bellows couplings. The flexible coupling showed superior rotordynamic and power generation performance than the belt coupling due to the enhanced alignment of the alternator rotor and the reduced mechanical frictions. Furthermore, the micro-power pack showed dramatic increases in the mass and volumetric power densities by ∼4 times and ∼5 times, respectively, compared with those of a commercial diesel generator with similar power level. As a result, this paper assures the feasibility of the light-weight micro-power pack using a MGT and automotive alternators for EVs.

  2. Lightweight Composite Materials for Heavy Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Pruez, Jacky; Shoukry, Samir; Williams, Gergis; Shoukry, Mark

    2013-08-31

    The main objective of this project is to develop, analyze and validate data, methodologies and tools that support widespread applications of automotive lightweighting technologies. Two underlying principles are guiding the research efforts towards this objective: • Seamless integration between the lightweight materials selected for certain vehicle systems, cost-effective methods for their design and manufacturing, and practical means to enhance their durability while reducing their Life-Cycle-Costs (LCC). • Smooth migration of the experience and findings accumulated so far at WVU in the areas of designing with lightweight materials, innovative joining concepts and durability predictions, from applications to the area of weight savings for heavy vehicle systems and hydrogen storage tanks, to lightweighting applications of selected systems or assemblies in light–duty vehicles.

  3. Analytical study of the prospectives published by the Secretaria de Energia; Estudio analitico de las prospectivas publicadas por la Secretaria de Energia

    Energy Technology Data Exchange (ETDEWEB)

    Beltran Mora, Hector Alejandro; Urias Romero, Francisco [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2004-06-15

    Since 1997 the Secretaria de Energia (SENER) publishes an annual report named Prospectiva del Sector Electrico, in which detailed information on the situation of the Mexican electrical sector is included, the information is related to the technological, economic and environmental aspects of all the organisms involved in the matter of electrical energy, within which stand out the Comision Federal de Electricidad (CFE), Luz y Fuerza del Centro (LyFC), the Comision Reguladora de Energia (CRE) and the Comision Nacional para el Ahorro de Energia (CONAE). In the prospectives the tendency of the modifications that will undergo the sector in a period of 10 years is analyzed. All the prospectives of the electrical sector, agree in that the growth of this sector is determined by the construction of power stations that use natural gas as primary energy, reason why we made an analysis of the prospectives of the natural gas market, with the purpose of observing the interaction between both sectors. At the moment seven prospectives of each sector have been published, given the conditions at the moment of their publication, they present differences and agreements between each other for periods of intersection. The present work shows the comparison between the expectations of growth reported by each one of the Prospectives. [Spanish] Desde 1997 la Secretaria de Energia (SENER) publica un reporte anual llamado Prospectiva del Sector Electrico, en el que se incluye informacion detallada sobre la situacion del sector electrico mexicano, la informacion esta relacionada con los aspectos tecnologicos, economicos y medioambientales de todos los organismos involucrados en materia de energia electrica, dentro de los cuales destacan la Comision Federal de Electricidad (CFE), Luz y Fuerza del Centro (LyFC), la Comision Reguladora de Energia (CRE) y la Comision Nacional para el Ahorro de Energia (CONAE). En las prospectivas se analiza la tendencia de las modificaciones que sufrira el sector

  4. Alcoholic fermentation: an option for renewable energy production from agricultural residues; Fermentacion alcoholica: una opcion para la produccion de energia renovable a partir de desechos agricolas

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, H. J [Universidad Autonoma Metropolitana (Mexico)]. E-mail: hjv@correo.azc.uam.mx; Dacosta, O [Oficina de Consejo, Desarrollo y Transferencia Tecnologica, Dijon (Francia)]. E-mail: statfor@yahoo.com

    2007-10-15

    Biotechnology offers several options for generating renewable energy. One of these technologies consists on producing bioethanol by fermentation. Bioethanol is mainly used to prepare fuel for motor vehicles. This paper presents a proposal to produce such as fuels with a hundred liters experimental fermentation pilot unit. Results derived from essays are similar, in terms of yield and productivity, to those presented by other systems, if we take into account that our unit works under non sterile conditions, which represents significant energy savings. This technology does not require specialized knowledge for its construction and it would accessible to groups of Mexican farmers. [Spanish] La biotecnologia ofrece diversas opciones para la generacion de energias renovables. Una de ellas es la produccion de bioetanol, el cual se obtiene mediante fermentacion. El bioetanol se usa en la preparacion de carburantes para vehiculos automotores. En este articulo se presenta una propuesta para la obtencion de este combustible mediante una unidad de fermentacion piloto experimental de 100 litros. Los resultados de nuestros ensayos, en rendimiento y productividad, son similares a los de otros laboratorios si se considera que esta unidad piloto funciona en condiciones no esteriles, lo que representa como ventaja un ahorro de energia no despreciable. Ademas, la tecnologia no requiere conocimientos especializados para su realizacion y estaria al alcance de grupos campesinos mexicanos.

  5. Integració de l'energia fotovoltaica en l'arquitectura catalana actual: casos d'estudi

    OpenAIRE

    Usón Guardiola, Ezequiel

    2009-01-01

    Una de les tecnologies mes prometedores per l’aprofitament de la inesgotable energia solar es la cèl·lula fotovoltaica (L’energia en forma de radiació solar que arriba a la Terra en una hora equival a la totalitat de l’energia que consumeix el planeta en un any ). Mitjançant l’efecte fotoelèctric la cèl·lula fotovoltaica transforma la llum solar en electricitat de una manera similar a com les plantes sintetitzen la radiació solar amb la clorofil·la, per obtenir l’energia necess...

  6. Nel contratto di «service» l'erogatore di energia elettrica non è soggetto passivo di accisa

    OpenAIRE

    Peruzza, D

    2011-01-01

    In materia di accise sull'energia elettrica, soggetto passivo del tributo è il fornitore professionale del bene «energia elettrica» che procede alla fatturazione dell'operazione di vendita in forza di un contratto di somministrazione; il soggetto che fornisce l'energia elettrica a terzi quale componente di una prestazione complessa nell'ambito di un contratto di «service», alla luce del contesto unitario di tale contratto, non può essere considerato soggetto venditore di energia elettrica ...

  7. Studies relevant to the design of reliable automotive electronics

    Science.gov (United States)

    Zeng, Hua

    This dissertation describes three independent studies related to the design of reliable automotive electronics. The topics covered are: the estimation of the radiated emissions from power bus structures, EM propagation of tire pressure monitoring systems (TPMS), and examinations of corrosion-induced faults in a connector. The first chapter describes a method for estimating the maximum possible radiated emissions from a printed circuit board power bus. An analysis based on a lossy cavity model is performed to determine the maximum possible radiated field corresponding to a given power bus noise voltage. A closed-form expression relating the maximum power bus noise voltage to the radiation peaks is then derived. This expression is solved in reverse to determine the minimum power bus voltage necessary to generate a radiated field and can be applied to measured values of power bus noise voltage to determine whether radiation directly from the power bus is potentially the emissions source. The second chapter identifies transmission parameters from a rotating tire and the vehicle body's effect on tire sensor transmission and propagation; relates these effects to receiver antenna packaging requirements; and then, based on these results, proposes the antenna design of employing car body as a part. In the new proposed TPMS design, a 20mm x 5mm loop antenna with a 40mm x 10mm slot beneath it is added to capture the surface currents of the car body and block the current path to increase the current density around the loop antenna. The simulation results show that this design exhibits a propagation factor 150 times larger than the traditional design. The third chapter investigates the effects of different contaminants (salt, oil, grease) on the shunt resistance between pins of a cable connector. The test results show that salt-induced corrosion and moisture may cause intermittent shunting resistances capable of affecting the normal operation of automotive systems. One

  8. THE USE OF RECYCLED SOLID AUTOMOTIVE PAINT WASTES AS INGREDIENTS IN AUTOMOTIVE SEALANT PRODUCTS - PHASE II

    Science.gov (United States)

    About 75,000,000 lbs of paint sludge is generated by the U.S. automotive industry each year. This type of waste and (similar streams from other industries) make significant contributions to landfills. The solution proposed by ASTER, Inc., proven feasible during the Phase I of thi...

  9. THE USE OF RECYCLED SOLID AUTOMOTIVE PAINT WASTES AS INGREDIENTS IN AUTOMOTIVE SEALANT PRODUCTS - PHASE I

    Science.gov (United States)

    About 75,000,000 lbs. of paint sludge is generated by the U.S. automotive industry each year. This type of waste (and similar streams in other industries) make a significant contribution to landfills. A proposed solution is to recycle the paint sludge into compounding ingredients...

  10. Automotive Air Conditioning and Heating; Automotive Mechanics (Advanced): 9047.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This document presents an outline for a 135-hour course designed to provide the student with all the foundations necessary to become employable in the automotive air conditioning and heating trade. The course of study includes an orientation to the world of work, the elementary physics of air conditioning and heating, and laboratory experiments…

  11. Nissan Mexicana. First place in national prize of electrical energy saving 1998; Nissan Mexicana. Primer lugar en premio nacional de ahorro de energia electrica 1998

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez S, Enrique [Nissan Mexicana, S.A. de C.V., Planta Civac, Cuernavaca, Mor. (Mexico)

    1999-07-01

    For Plant CIVAC of Nissan Mexicana, the energy saving began in the year of 1990. From then, different programs have been developed using different strategies for energy saving until arriving at the Benchmarking with other Plants of Japan, which represents a new challenge, since it opened up an area of opportunity of saving in processes that generally were known in detail as far as to its main function (to make vehicles with quality, cost and opportunity of delivery), but the parameter of energy consumption of by unit and its benefits in relation to the cost was unknown. This was endorsed by the high Direction and began with the optimization of training for the operation of each equipment with the involvement of the user (Production), the engineering area (that establishes the process) and the maintenance area. We designed a general program where the basic activities were included, such as the general and special activities. Each one of them fulfilled its objective, but the special activities took us to the optimization of the processes, finding excess of energy in the design conditions. [Spanish] Para Planta CIVAC de Nissan Mexicana, el ahorro de energia se inicio en el ano de 1990. A partir de entonces se han desarrollado programas de ahorro de energia usando estrategias diferentes hasta llegar al Benchmarking con otras Plantas de Japon, el cual representa un reto nuevo, ya que puso al descubierto una area de oportunidad de ahorro en los procesos que por lo general se conocian a detalle en cuanto a la funcion principal (hacer vehiculos con calidad, costo y oportunidad de entrega), pero se desconocia el parametro de consumo de energia por unidad y sus beneficios en relacion con el costo. Esto fue avalado por la alta Direccion y se inicio con la capacitacion de la optimizacion de la operacion de cada equipo y se involucro al usuario (Produccion), al area de ingenieria (que establece el proceso) y al area de mantenimiento. Elaboramos un programa general donde se

  12. Safer Vehicles for People and the Planet

    Energy Technology Data Exchange (ETDEWEB)

    Wenzel, Thomas P; Wenzel, Thomas P; Ross, Marc

    2008-03-01

    Motor vehicles contribute to climate change and petroleum dependence. Improving their fuel economy by making them lighter need not compromise safety. The cars and trucks plying America's roads and highways generate roughly 20 percent of the nation's total emissions of carbon dioxide, a pollutant that is, of course, of increasing concern because of its influence on climate. Motor vehicles also account for most of our country's dependence on imported petroleum, the price of which has recently skyrocketed to near-record levels. So policymakers would welcome the many benefits that would accrue from lessening the amount of fuel consumed in this way. Yet lawmakers have not significantly tightened new vehicle fuel-economy standards since they were first enacted three decades ago. Since then, manufacturers have, for the most part, used advances in automotive technology, ones that could have diminished fuel consumption, to boost performance and increase vehicle weight. In addition, the growth in popularity of pickups, sport utility vehicles (SUVs) and minivans--and the large amounts of gas they typically guzzle--has resulted in the average vehicle using the same amount of fuel per mile as it did 20 years ago. One of the historical impediments to imposing tougher fuel-economy standards has been the long-standing worry that reducing the mass of a car or truck to help meet these requirements would make it more dangerous to its occupants in a crash. People often justify this concern in terms of 'simple physics', noting, for example, that, all else being equal, in a head-on collision, the lighter vehicle is the more strongly decelerated, an argument that continues to sway regulators, legislators and many in the general public. We have spent the past several years examining the research underlying this position--and some recent work challenging it. We have also conducted our own analyses and come to the conclusion that the claim that lighter vehicles are

  13. Nanofluids with CNTs for automotive applications

    Science.gov (United States)

    Srinivas, V.; Moorthy, Ch. V. K. N. S. N.; Dedeepya, V.; Manikanta, P. V.; Satish, V.

    2016-04-01

    This paper summarizes a recent work on anti-corrosive and enhanced heat transfer properties of carboxylated water based nanofluids. DI water mixed with Sebacic acid (C10H18O4) as carboxylate additive is dispersed with multi walled carbon nanotubes and tested for corrosion and heat transfer characteristics. Corrosion studies made as per ASTM D 1384 show that carboxylate water dispersed with MWCNTs is resistant to corrosion and hence suitable for automotive environment. In addition to MWCNTs, carboxylated water dispersed with nano sized silver, copper and Aluminium oxide are also tested for corrosion performance but found to be giving considerable corrosion in automotive environment. The stability of MWCNT based nanofluids in terms of zeta potential is found to be good with carboxylated water compared to DI water. Significant improvement is observed in the thermal conductivity of nanofluids dispersed with MWCNTs. There is a slight increase in viscosity and marginal decrease in the specific heat of nanofluids with addition of carboxylate as well as MWCNTs. The carboxylated water is dispersed with very low mass concentration of multi walled carbon nano tubes at 0.025, 0.05 and 0.1 % and tested for heat transfer performance. The heat transfer studies are made in Reynolds number range of 2500-6000 in the developing flow regime. The heat transfer performance of nanofluids is carried out on an air cooled heat exchanger similar to an automotive radiator with incoming air velocities across radiator maintained at 5, 10 and 15 m/s. The coolant side overall heat transfer coefficient and overall heat transfer coefficient have improved markedly. It is also found that the velocity of air and flow rate of coolant plays an important role in enhancement of overall heat transfer coefficient. Stanton number correlation for the entire data has been developed. It is found that the wall temperature gradients play an important role in the enhancement of heat transfer when nanofluids are

  14. Analysis and control of an in situ hydrogen generation and fuel cell power system for automotive applications

    Science.gov (United States)

    Kolavennu, Panini K.

    A new future in automotive transportation is approaching where vehicles are powered by new, clean and efficient energy sources. While different technologies will contribute to this future, many see fuel cells as the leading long term candidate for becoming the power source for emissions-free, mass produced light vehicles. The development of emissions-free vehicles, which run directly on hydrogen, is the true long term goal. However significant difficulties exist in developing these vehicles, due to hydrogen storage problems. For automotive applications, it is desirable to use a carbon-based hydrogenous fuel. The focus of this research was to analyze a fuel cell system for automotive applications, which generated hydrogen in situ using methane as a fuel source. This system consists of four parts: (1) an in situ hydrogen generation subsystem, (2) a power generation subsystem, (3) a thermal management subsystem and (4) a switching control subsystem. The novelty of this research lies in the fact that the entire system was considered from a systems engineering viewpoint with realistic constraints. A fuel processor subsystem was designed and its volume optimized to less than 100 liters. A relationship between the fuel fed into the fuel processor and the hydrogen coming out of it was developed. Using a fuel cell model an overall relationship between the fuel feed rate and the power output was established. The fuel cell car must be fully operational within a minute or so of a cold-start and must respond to rapidly varying loads. Significant load transitions occur frequently as a result of changes in driving conditions. These engineering constraints were addressed by coupling a battery to the fuel cell. A switching controller was designed and it was validated using realistic power profiles. Finally, a model reference adaptive controller was designed to handle nonlinearities and load transitions. The adaptive controller performance was enhanced by adding dead zone

  15. An Overview of NASA Automotive Component Reliability Studies

    Science.gov (United States)

    Sampson, Michael J.

    2016-01-01

    The results of NASAs studies into the appropriateness of using US Automotive electronic parts in NASA spaceflight systems will be presented. The first part of the presentation provides an overview of the United States Automotive Electronics Councils AECQ standardization program, the second part provides a summary of the results of NASAs procurement and testing experiences and other lessons learned along with preliminary test results.

  16. Cooling System: Automotive Mechanics Instructional Program. Block 6.

    Science.gov (United States)

    O'Brien, Ralph D.

    The last of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in the automotive cooling system at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each…

  17. Automotive fuels. Quality current and future perspectives

    International Nuclear Information System (INIS)

    In the present paper, a general view of the automotive fuel characteristics and of the influence of the most important fuel parameters on the engine performance and emissions are presented. At short term, the future scenario is conditioned by the application of the next European Directive on fuel specifications, that will came into effect on 1 January 2000. The composition of liquid fuels shall be subject to modifications nd restrictions to meet the new specifications Among alternative fuels, natural gas and Lpg (liquefied petroleum gases) are the most interesting in the view point of environmental protection. Biodiesel constitutes a potential and valid alternative to mineral gas oil in diesel engines

  18. Characterization of three-way automotive catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kenik, E.A.; More, K.L. [Oak Ridge National Laboratory, TN (United States); LaBarge, W. [General Motors-AC Delco Systems, Flint, MI (United States)] [and others

    1995-05-01

    This has been the second year of a CRADA between General Motors - AC Delco Systems (GM-ACDS) and Martin Marietta Energy Systems (MMES) aimed at improved performance/lifetime of platinum-rhodium based three-way-catalysts (TWC) for automotive emission control systems. While current formulations meet existing emission standards, higher than optimum Pt-Rh loadings are often required. In additionk, more stringent emission standards have been imposed for the near future, demanding improved performance and service life from these catalysts. Understanding the changes of TWC conversion efficiency with ageing is a critical need in improving these catalysts.

  19. Advanced high strength steels for automotive industry

    International Nuclear Information System (INIS)

    The car industry is facing pressure because of the growing demand for more fuel-efficient passenger cars. In order to limit energy consumption and air pollution the weight of the car body has to be reduced. At the same time, high levels of safety have to be guaranteed. In this situation, the choice of material becomes a key decision in car design. As a response to the requirements of the automotive sector, high strength steels and advanced high strength steels have been developed by the steel industry. These modern steel grades offer an excellent balance of low cost, light weight and mechanical properties. (Author) 48 refs.

  20. Dynamic characteristics of automotive steel sheets

    Directory of Open Access Journals (Sweden)

    M. Mihaliková

    2016-10-01

    Full Text Available The aim of this experimental research was to perform an analysis of deformation characteristics on two different types of steel: IF steel, and micro-alloyed steel were used automotive industry. For that purpose changes of properties of these materials were carried out by static 10-3 · s-1 and dynamic 103 · s-1 strain rate assess its plastic properties. Vickers micro hardness test was carried out by the static and dynamic loading condition and describes different hardness distribution. The higher strain hardening of materials was obtained too that was confirmed by distribution of dislocations.