WorldWideScience

Sample records for automotive computers

  1. Computational intelligence in automotive applications

    Energy Technology Data Exchange (ETDEWEB)

    Prokhorov, Danil (ed.) [Toyota Motor Engineering and Manufacturing (TEMA), Ann Arbor, MI (United States). Toyota Technical Center

    2008-07-01

    What is computational intelligence (CI)? Traditionally, CI is understood as a collection of methods from the fields of neural networks (NN), fuzzy logic and evolutionary computation. This edited volume is the first of its kind, suitable to automotive researchers, engineers and students. It provides a representative sample of contemporary CI activities in the area of automotive technology. The volume consists of 13 chapters, including but not limited to these topics: vehicle diagnostics and vehicle system safety, control of vehicular systems, quality control of automotive processes, driver state estimation, safety of pedestrians, intelligent vehicles. All chapters contain overviews of state of the art, and several chapters illustrate their methodologies on examples of real-world systems. About the Editor: Danil Prokhorov began his technical career in St. Petersburg, Russia, after graduating with Honors from Saint Petersburg State University of Aerospace Instrumentation in 1992 (MS in Robotics). He worked as a research engineer in St. Petersburg Institute for Informatics and Automation, one of the institutes of the Russian Academy of Sciences. He came to the US in late 1993 for Ph.D. studies. He became involved in automotive research in 1995 when he was a Summer intern at Ford Scientific Research Lab in Dearborn, MI. Upon his graduation from the EE Department of Texas Tech University, Lubbock, in 1997, he joined Ford to pursue application-driven research on neural networks and other machine learning algorithms. While at Ford, he took part in several production-bound projects including neural network based engine misfire detection. Since 2005 he is with Toyota Technical Center, Ann Arbor, MI, overseeing important mid- and long-term research projects in computational intelligence. (orig.)

  2. Computational design of an automotive twist beam

    Directory of Open Access Journals (Sweden)

    Benki Aalae

    2016-07-01

    Full Text Available In recent years, the automotive industry has known a remarkable development in order to satisfy the customer requirements. In this paper, we will study one of the components of the automotive which is the twist beam. The study is focused on the multicriteria design of the automotive twist beam undergoing linear elastic deformation (Hooke׳s law. Indeed, for the design of this automotive part, there are some criteria to be considered as the rigidity (stiffness and the resistance to fatigue. Those two criteria are known to be conflicting, therefore, our aim is to identify the Pareto front of this problem. To do this, we used a Normal Boundary Intersection (NBI algorithm coupling with a radial basis function (RBF metamodel in order to reduce the high calculation time needed for solving the multicriteria design problem. Otherwise, we used the free form deformation (FFD technique for the generation of the 3D shapes of the automotive part studied during the optimization process.

  3. Computer designing and test results of automotive thermoelectric generator

    Energy Technology Data Exchange (ETDEWEB)

    Anatychuk, Lukyan Ivanovich; Kuz' , Roman Vasyl' ovych [National Academy of Sciences, Chernivtsi (Ukraine). Inst. of Thermoelectricity

    2011-07-01

    There are results of thermoelectric generator computer designing for automobile in different model approximations shown. The basic regularities of generator operation are determined: optimal thermal conditions, temperature distribution along the gas flow, heat current correlation on generator's input and on its output. Efficiency limiting values are determined. There are requirements for thermoelectric material determined. There is an effectiveness increase at the expense of FGM aplication considered. There are dynamic conditions of generator operation considered. Form-factors optimal values for European traffic condition are established. Block design schemes of generator constructions are studied ensuring the adaptation of generator operation to different engine powers under different loads. Thermoelectric modules for automotive generator are produced. Their characteristics are described including reliability and specific cost. Generator of 600W is developed on basis of computer analysis and designing. (orig.)

  4. Real-time simulation of an automotive gas turbine using the hybrid computer

    Science.gov (United States)

    Costakis, W.; Merrill, W. C.

    1984-01-01

    A hybrid computer simulation of an Advanced Automotive Gas Turbine Powertrain System is reported. The system consists of a gas turbine engine, an automotive drivetrain with four speed automatic transmission, and a control system. Generally, dynamic performance is simulated on the analog portion of the hybrid computer while most of the steady state performance characteristics are calculated to run faster than real time and makes this simulation a useful tool for a variety of analytical studies.

  5. Evaluating Electronic Customer Relationship Management Performance: Case Studies from Persian Automotive and Computer Industry

    OpenAIRE

    Safari, Narges; Safari, Fariba; Olesen, Karin; Shahmehr, Fatemeh

    2016-01-01

    This research paper investigates the influence of industry on electronic customer relationship management (e-CRM) performance. A case study approach with two cases was applied to evaluate the influence of e-CRM on customer behavioral and attitudinal loyalty along with customer pyramid. The cases covered two industries consisting of computer and automotive industries. For investigating customer behavioral loyalty and customer pyramid companies database were computed while for examining custome...

  6. Surface Inspection Of Automotive Bodies By Reflective Computer Vision

    Science.gov (United States)

    Hung, Y. Y.; Jin, G. C.; Tang, S. H.

    1988-12-01

    A simple but practical optical technique for automated surface inspection of car bodies is presented. The method which is based on light reflection is applicable to inspecting specularly reflective surfaces such as painted car bodies. A structured light signal consists of linear grating is imaged by a video camera via the surface to be inspected. With this arrangement, the surface being inspected acts as a mirror. Presence of surface flaws causes the grating to be locally perturbed. The grating-image is digitized and analyzed by a computer. Several algorithms are developed which automatically identifies the surface flaws by analyzing the perturbation in the grating-image. The technique allows surface flaws to be quantified in terms of slope deviation or depth variation. The sensitivity of the technique is very high permitting minute flaws to be detected. In the paper the theory of the technique will be presented together with experimental validation. The technique possesses numerous practical features such as requiring no special surface preparation, allowing evaluation in place, requiring minimum environmental safeguards, allowing rapid testing and evaluation, providing reliable and quantitative results, and it can be automated. Therefore the technique has clearly exhibited a great potential for being developed into a production-line inspection tool.

  7. Effect of turbulence in modeling the reduction of local drag forces in a computational automotive model

    Directory of Open Access Journals (Sweden)

    Sanwar A. Sunny

    2011-11-01

    Full Text Available In this computational fluid dynamic (CFD study on vehicle drag forces sheds light on the mathematical algorithms utilized to converge on pertinent data useful in the design and manufacture of automobiles. COSMOS Floworks™ was used to model the virtual vehicle motion involving various governing flow equations with main attention given to turbulent behavior in incompressible fluid flows. The paper highlighted Navier-Stokes considerations in the study and introduced Reynolds Decomposition methods to generate more refined models which in turn give accurate results, such as Reynolds-Averaged Navier–Stokes (RANS Equations and Large Eddy Simulation (LES Techniques, introduced using the Einstein Notation. Recent developments in Coherent vortex simulation methods were also briefly discussed. Example modeling and tests were conducted to show automotive design improvements that resulted in a 8.57% improvement in local drag forces (FD at the rear wheel wells, which effectively reduces the required Horsepower (hp of the vehicle traveling at a certain speed (7.24 %. Different 3-D Automotive Design Models were examined in the current study, where real life design considerations and design benefits applications were briefly discussed. Furthermore, the paper highlights the need for utilization of both computational and real flow analysis on the car body and future performance relationship with the car’s body weight, material and design.

  8. Računalniško obvladovanje kakovosti v avtomobilski industriji: Computer-supported quality control in the automotive industry:

    OpenAIRE

    SLUGA, Alojzij; Metljak, Drago

    2001-01-01

    We present a computer-supported system for monitoring and quality control in a supply chain in the automotive industry. A standardized general model of a factory revealing the structure of the important business and manufacture functions, including functions of the CAQ (computer-aided quality) system, is defined. Within the model there is an emphasis on(1) the measurement and control of process and products, and(2) the management of nonconformities and systematic corrective and preventive act...

  9. Integrated computer-aided design in automotive development development processes, geometric fundamentals, methods of CAD, knowledge-based engineering data management

    CERN Document Server

    Mario, Hirz; Gfrerrer, Anton; Lang, Johann

    2013-01-01

    The automotive industry faces constant pressure to reduce development costs and time while still increasing vehicle quality. To meet this challenge, engineers and researchers in both science and industry are developing effective strategies and flexible tools by enhancing and further integrating powerful, computer-aided design technology. This book provides a valuable overview of the development tools and methods of today and tomorrow. It is targeted not only towards professional project and design engineers, but also to students and to anyone who is interested in state-of-the-art computer-aided development. The book begins with an overview of automotive development processes and the principles of virtual product development. Focusing on computer-aided design, a comprehensive outline of the fundamentals of geometry representation provides a deeper insight into the mathematical techniques used to describe and model geometrical elements. The book then explores the link between the demands of integrated design pr...

  10. Effect of turbulence in modeling the reduction of local drag forces in a computational automotive model

    OpenAIRE

    Sanwar A. Sunny

    2011-01-01

    In this computational fluid dynamic (CFD) study on vehicle drag forces sheds light on the mathematical algorithms utilized to converge on pertinent data useful in the design and manufacture of automobiles. COSMOS Floworks™ was used to model the virtual vehicle motion involving various governing flow equations with main attention given to turbulent behavior in incompressible fluid flows. The paper highlighted Navier-Stokes considerations in the study and introduced Reynolds Decomposition metho...

  11. Computational fluid dynamics modelling of a polymer electrolyte membrane fuel cell under transient automotive operations

    OpenAIRE

    Choopanya, Pattarapong

    2016-01-01

    A polymer electrolyte membrane (PEM) fuel cell is probably the most promising technology that will replace conventional internal combustion engines in the near future. As a primary power source for an automobile, the transient performance of a PEM fuel cell is of prime importance. In this thesis, a comprehensive, three-dimensional, two-phase, multi-species computational fuel cell dynamics model is developed in order to investigate the effect of flow-field design on the magnitude of current ov...

  12. Computational analysis of A-Pillar vortex formation in automotive applications

    Science.gov (United States)

    Bhambra, Devinder Pal Singh

    The research focuses on computational analysis of vortex generation behind A-Pillar of simplified model derived from Jaguar XF that excludes air from the underside of vehicle. This vortex formation contributes in generating wall pressure fluctuations especially at speeds higher than 100km/hr. It is a collaborative work between Cranfield University and Jaguar Land Rover. Three dimensional pressure based incompressible flow using Large Eddy Simulation turbulence model is selected for computational analysis in FLUENT v14. This used high parallel computing systems available in Cranfield University. In the initial phase, three grid resolutions (coarse, medium and fine) were prepared in ICEM CFD with fine case consisting of 10 million cells. Qualitative analysis includes extraction of slices, 3-D and surface streamlines and pressure and velocity contours for capturing the unsteadiness due to the vortex formation over the front side glass surface. The iso-surface of Q captures the unsteadiness at the A-Pillar wake and side mirror wake over front side glass surface. It also reveals that the range of length scales captured were limited even at the finest grid resolution. Quantitative analysis compares the mean pressure (Cp) data with JLR results.. Probes were located at 51 locations over the front side glass window that showed a good comparison; specifically for the fine grid; with maximum variation incurred at probes located in separation areas. For predicting the wall pressure fluctuations, a total of ten probes were located over the front side glass window surface. The surface pressure (static) data was recorded for 1 sec of flow-time and later imported in MATLAB for post-processing. The results obtained in 1/3rd octave band showed that the large scales were too energetic and small scales are not captured. However, comparing sound pressure levels with the Aero-acoustic Wind Tunnel (AWT); provided by JLR; it is concluded that either the grid is too coarse to resolve

  13. Computer aided method for quality control of automotive Al-Si-Cu cast components

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2007-10-01

    Full Text Available Purpose: The technological progress in material engineering causes the continuous need to develop product testing methods providing comprehensive quality evaluation. In material engineering it is the images obtained by various methods that have become the source of information about materials.Design/methodology/approach: The presented methodology, making it possible to determine the types and classes of defects developed during casting the elements from aluminum alloys, making use photos obtained with the flaw detection method with the X-ray radiation. The tests indicate to the applicability of neural networks for this task. It is very important to prepare the neural network data in the appropriate way, including their standardization, carrying out the proper image analysis and correct selection and calculation of the geometrical coefficients of flaws in the X-ray images.Findings: In classical computer algorithms even a slight rotation or change in lightning can hinder the proper interpretation and alternation of variable input data. To eliminate this hindrance the programming can be converted by specifying such features of the structure element that remain most significant and affect the similarities of the analysed images. In neural networks this particular feature needs not to be specified – if necessary, the neural network spots it automatically.Practical implications: The computer aided methodology of the quality control of the light Al and Mg based alloys may be used by manufacturers of subassemblies and elements of car engines.Originality/value: The value of the applied methodology was to correct identify the casting effects that occurred during the casting process.

  14. Multicore scheduling in automotive ECUs

    OpenAIRE

    Monot, Aurélien; Navet, Nicolas; Bavoux, Bernard; Simonot-Lion, Françoise

    2010-01-01

    As the demand for computing power is quickly increasing in the automotive domain, car manufacturers and tier-one suppliers are gradually introducing multicore ECUs in their electronic architectures. Additionally, these multicore ECUs offer new features such as higher levels of parallelism which eases the espect of the safety requirements introduced by the ISO 26262 and can be taken advantage of in various other automotive use-cases. These new features involve also more complexity in the desig...

  15. Automotive Underhood Thermal Management Analysis Using 3-D Coupled Thermal-Hydrodynamic Computer Models: Thermal Radiation Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Pannala, S; D' Azevedo, E; Zacharia, T

    2002-02-26

    The goal of the radiation modeling effort was to develop and implement a radiation algorithm that is fast and accurate for the underhood environment. As part of this CRADA, a net-radiation model was chosen to simulate radiative heat transfer in an underhood of a car. The assumptions (diffuse-gray and uniform radiative properties in each element) reduce the problem tremendously and all the view factors for radiation thermal calculations can be calculated once and for all at the beginning of the simulation. The cost for online integration of heat exchanges due to radiation is found to be less than 15% of the baseline CHAD code and thus very manageable. The off-line view factor calculation is constructed to be very modular and has been completely integrated to read CHAD grid files and the output from this code can be read into the latest version of CHAD. Further integration has to be performed to accomplish the same with STAR-CD. The main outcome of this effort is to obtain a highly scalable and portable simulation capability to model view factors for underhood environment (for e.g. a view factor calculation which took 14 hours on a single processor only took 14 minutes on 64 processors). The code has also been validated using a simple test case where analytical solutions are available. This simulation capability gives underhood designers in the automotive companies the ability to account for thermal radiation - which usually is critical in the underhood environment and also turns out to be one of the most computationally expensive components of underhood simulations. This report starts off with the original work plan as elucidated in the proposal in section B. This is followed by Technical work plan to accomplish the goals of the project in section C. In section D, background to the current work is provided with references to the previous efforts this project leverages on. The results are discussed in section 1E. This report ends with conclusions and future scope of

  16. Rotordynamics of automotive turbochargers

    CERN Document Server

    Nguyen-Schäfer, Hung

    2015-01-01

    Rotordynamics of automotive turbochargers is dealt with in this book encompassing the widely working field of small turbomachines under real operating conditions at the very high rotor speeds up to 300000 rpm. The broadly interdisciplinary field of turbocharger rotordynamics involves 1) Thermodynamics and Turbo-Matching of Turbochargers 2) Dynamics of Turbomachinery 3) Stability Analysis of Linear Rotordynamics with the Eigenvalue Theory 4) Stability Analysis of Nonlinear Rotordynamics with the Bifurcation Theory 5) Bearing Dynamics of the Oil Film using the Two-Phase Reynolds Equation 6) Computation of Nonlinear Responses of a Turbocharger Rotor 7) Aero and Vibroacoustics of Turbochargers 8) Shop and Trim Balancing at Two Planes of the Rotor 9) Tribology of the Bearing Surface Roughness 10) Design of Turbocharger Platforms using the Similarity Laws The rotor response of an automotive turbocharger at high rotor speeds is studied analytically, computationally, and experimentally. Due to the nonlinear character...

  17. Automotive sensors

    Science.gov (United States)

    Marek, Jiri; Illing, Matthias

    2003-01-01

    Sensors are an essential component of most electronic systems in the car. They deliver input parameters for comfort features, engine and emission control as well as for the active and passive safety systems. New technologies such as silicon micromachining play an important role for the introduction of these sensors in all vehicle classes. The importance and use of these sensor technologies in today"s automotive applications will be shown in this article. Finally an outlook on important current developments and new functions in the car will be given.

  18. Automotive Electronics. Teacher Edition (Revised).

    Science.gov (United States)

    Mackert, Howard C.; Heiserman, Russell L.

    This learning module addresses computers and their applications in contemporary automobiles. The text provides students with information on automotive microcomputers and hands-on activities that will help them see how semiconductors and digital logic devices fit into the modern repair facility. The module contains nine instructional units that…

  19. Automotive electronics

    Energy Technology Data Exchange (ETDEWEB)

    Basshuysen, R. van [ed.; Baun, R. [comp.

    2000-10-01

    Electronic equipment is indispensable in modern motor cars for active and passive safety, exhaust and consumption monitoring or comfort. Electric and electronic systems today account for nearly 20 percent of the production cost of a normal passenger car, with an upward trend. Infotainment equipment is a growing market, which gets center stage in this issue. Further subjects discussed are current electronic and mechatronic applications as well as new developments in data transmission, development tools and constructional elements. [German] Ohne Elektronik sind moderne Automobile nicht mehr vorstellbar. Ob aktive oder passive Sicherheit, Abgas, Verbrauch oder Komfort - der Fortschritt im Autombil ist eng verknuepft mit der Einfuehrung neuer elektronischer Systeme und Komponenten. Obwohl meist nicht sehr auffaellig in einer Black-box verpackt, liegen die anteiligen Herstellungskosten fuer die Elektrik und Elektronik bei einem Mittelklassefahrzeug schon bei knapp 20 Prozent. Tendenz: Weiter steigend. Waehrend die Segnungen von ABS, ESP oder Motormanagement fuer den Kunden unsichtbar bleiben, tritt die Elektronik mit den Infotainment-Systemen ins Rampenlicht. Hochwertige Audio-Anlagen im Doppel-DIN-Format und grosse Farbbildschirme sitzen an prominenter Stelle im Armaturenbrett. Elektronische Systeme werden damit fuer den Kunden sichtbar, greifbar und erlebbar. Doch je mehr Funktionen integriert werden, desto wichtiger wird eine einfache Bedienung, die den Fahrer moeglichst wenig vom Verkehrsgeschehen ablenkt. Das ist leider keine Selbstverstaendlichkeit: Eine klare, einfache Bedienung wurde in der Vergangenheit schon bei so manchem simplen Cassetten-Radio schmerzlich vermisst. Infotainment im Automobil ist ein Wachstumsmarkt - und das Schwerpunkt-Thema der vorliegenden zweiten Ausgabe von 'Automotive Electronics'. Darueber hinaus beschaeftigt sich auch diese Ausgabe mit aktuellen Elektronik- und Mechatronik-Anwendungen und berichtet ueber neue Entwicklungen

  20. Automotive Aluminium Recycling

    Energy Technology Data Exchange (ETDEWEB)

    Gelas, B. des

    2000-07-01

    This paper aims at providing an overview on the contribution of aluminium recycling in the supply of new aluminium for automotive applications. Based on a presentation on how the global European automotive aluminium supply requirements are met, an analysis of the present and future contribution of automotive aluminium recycling is first presented. Current situation and future developments for automotive aluminium recycling practices are then commented, together with an outline on design principles for easier aluminium recycling. (orig.)

  1. Automotive vehicle sensors

    Energy Technology Data Exchange (ETDEWEB)

    Sheen, S.H.; Raptis, A.C.; Moscynski, M.J.

    1995-09-01

    This report is an introduction to the field of automotive vehicle sensors. It contains a prototype data base for companies working in automotive vehicle sensors, as well as a prototype data base for automotive vehicle sensors. A market analysis is also included.

  2. Multidisciplinary Design Optimization of Automotive Structures

    OpenAIRE

    Domeij Bäckryd, Rebecka

    2013-01-01

    Multidisciplinary design optimization (MDO) can be used as an effective tool to improve the design of automotive structures. Large-scale MDO problems typically involve several groups who must work concurrently and autonomously for reasons of efficiency. When performing MDO, a large number of designs need to be rated. Detailed simulation models used to assess automotive design proposals are often computationally expensive to evaluate. A useful MDO process must distribute work to the groups inv...

  3. Automotive Design

    Science.gov (United States)

    1991-01-01

    Analytical Design Service Corporation, Ann Arbor, MI, used NASTRAN (a NASA Structural Analysis program that analyzes a design and predicts how parts will perform) in tests of transmissions, engine cooling systems, internal engine parts, and body components. They also use it to design future automobiles. Analytical software can save millions by allowing computer simulated analysis of performance even before prototypes are built.

  4. Automotive factory network renewal

    OpenAIRE

    Scicluna, Christopher

    2012-01-01

    The aim of this applied thesis was to plan, implement, and study the upgrading the network infrastructure in Valmet Automotive Oy, specifically in its Uusikaupunki factory. Valmet Automotive is a Finnish automotive service provider, focusing on premium vehicles, convertible roof systems and electric vehicles. The objective was to plan and implement a networking infrastructure that could support the load of a factory in full-scale production, while ensuring near-constant availability. T...

  5. European Automotive Congress

    CERN Document Server

    Clenci, Adrian

    2016-01-01

    The volume includes selected and reviewed papers from the European Automotive Congress held in Bucharest, Romania, in November 2015. Authors are experts from research, industry and universities coming from 14 countries worldwide. The papers are covering the latest developments in fuel economy and environment, automotive safety and comfort, automotive reliability and maintenance, new materials and technologies, traffic and road transport systems, advanced engineering methods and tools, as well as advanced powertrains and hybrid and electric drives.

  6. Design of an automotive frame cross member for the hydro-forming process using computer aided engineering

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.J.; Han, C.P.; Sung, C.W. [Department of Automobile Enginering, Seojeong College, Gyeong-gi-do (Korea); Lim, E.J. [Divison of Fire Protection and Safety, Seojeong College, Gyeong-gi-do (Korea); Choi, B.I. [Nano Mechanics Team, Korea Institute of Machinery and Materials, Taejon (Korea); Oh, S. [Department of Automobile Engineering, Seoul College University, Seoul (Korea); Park, J.H. [Department of Mechatronics Engineering, College of Engineering, Tongmyong University, Busan (Korea); Won, S.T. [Department of Die and Mould Design, Seoul National Univesity of Technology, Seoul (Korea); Kim, S.S. [School of Nano and Advanced Materials Science and Engineering, Gyeongsang National University, Gyeongnam (Korea)

    2010-05-15

    Hydroforming is a forming technology in which a steel tube is set in a die and formed to fit a specified shape by applying hydraulic pressure from inside the tube while also applying force in the tube axial direction (axial feed). In the present study, the whole process chain of frame component (cross member) simulation and development by hydroforming technology to apply to a high strength steel having a tensile strength of 440 MPa grade is studied. At the part design stage, a feasibility study and process design aided by CAE (Computer Aided Design) to confirm the hydroformability in detail is required. The overall possibility of the hydroformability of the frame part could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of the tube material in every forming step such as pre-bending and hydroforming. At the die design stage, all the components of the prototyping tool are designed and the interference with the press is investigated from the geometry. For the improvement of tube thinning, the hydroforming was carried out adding an axial feeding of 45 mm at both ends of the part for supplying materials to the end zone where thinning occurs and retards burst. From this treatment, the thinning of the tube wall was experimentally measured and it was improved by 17.9%. It is in good agreement with the calculation and the position of the maximum thinning corresponds to the result of the simulation. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  7. Kentucky's Automotive Certification Program.

    Science.gov (United States)

    Kentucky State Dept. of Education, Frankfort. Office of Vocational Education.

    The state of Kentucky recognized a need to standardize automotive mechanics training throughout the state and to establish minimum guidelines for the quality of instruction in such programs. To meet these needs, the Office of Vocational Education selected the National Institute for Automotive Service Excellence (ASE) and began the certification…

  8. Automotive Industry in Malaysia

    DEFF Research Database (Denmark)

    Wad, Peter; Govindaraju, V.G.R. Chandran

    2011-01-01

    This paper explains the evolution and assesses the development of the Malaysian automotive industry within the premise of infant industry and trade protection framework as well as extended arguments of infant industry using a global value chain perspective. The Malaysian automotive industry...

  9. Automotive Technology Skill Standards

    Science.gov (United States)

    Garrett, Tom; Asay, Don; Evans, Richard; Barbie, Bill; Herdener, John; Teague, Todd; Allen, Scott; Benshoof, James

    2009-01-01

    The standards in this document are for Automotive Technology programs and are designed to clearly state what the student should know and be able to do upon completion of an advanced high-school automotive program. Minimally, the student will complete a three-year program to achieve all standards. Although these exit-level standards are designed…

  10. Automotive electronics design fundamentals

    CERN Document Server

    Zaman, Najamuz

    2015-01-01

    This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs.  A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.

  11. National Automotive Center - NAC

    Data.gov (United States)

    Federal Laboratory Consortium — Encouraged by the advantages of collaboration, the U.S. Army Tank Automotive Research, Development and Engineering Center (TARDEC) worked with the Secretary of the...

  12. Automotive Software & Service Engineering

    OpenAIRE

    Zauner, Andreas; Hoffmann, Holger; Leimeister, Jan Marco; Krcmar, Helmut

    2014-01-01

    Automotive Software und Services (ASS) sind zentrale Innovationstreiber in der Automobilindustrie und gewinnen zunehmend an Bedeutung. In diesem Arbeitsbericht beschreiben wir die aktuellen Herausforderungen bei der Erstellung von ASS sowie Entwicklungstrends in der Dom?ne, jeweils aus Sicht der wesentlichen Stakeholder in der Industrie auf Basis von 21 Experteninterviews. Dazu geben wir einen ?berblick ?ber bestehende Automotive Software und beschreiben unser methodisches Vorgehen bei der Da...

  13. Automotive Corporate Strategy in CEE

    OpenAIRE

    Kadlecová, Petra

    2009-01-01

    The diploma thesis shows the status of the automotive industry in the Czech Republic. It shows the trends in the Czech automotive industry in short theoretical presentation. There is a trend of the future competition from developing countries, other problems are growing raw material prices or government's limits in CO2 production. The companies connected to the automotive industry are reacting. The relevant information about the status and reactions of the Czech automotive industry companies,...

  14. TENDENCIES IN AUTOMOTIVE TRANSPORT DEVELOPMENT

    OpenAIRE

    U. D. Antushenay; T. R. Kisel

    2008-01-01

    The paper contains an analysis of export of transport services provided by the Republic automotive transport. Structure of expenses associated with operation of automotive transport facilities is presented in the paper. The paper cites directions pertaining to development of international automotive transportation.

  15. Aero and vibroacoustics of automotive turbochargers

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen-Schaefer, Hung [Bosch Mahle Turbo Systems GmbH, Stuttgart (Germany)

    2013-02-01

    First book about the aeroacoustics of automotive turbochargers. Author of the book ''Rotordynamics of Automotive Turbochargers'', Springer, 2012. Written by an R and D expert in the turbocharger industry. Aero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation. In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions. Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill's analogy, is required to investigate airborne noises produced by turbochargers in passenger vehicles. The content of this book is intended for advanced undergraduates, graduates in mechanical engineering, research scientists and practicing engineers who want to better understand the interactions between these working fields and the resulting impact on the interesting topic of Aero and Vibroacoustics of Automotive Turbochargers.

  16. Techno-economic requirements for automotive composites

    Science.gov (United States)

    Arnold, Scot

    1993-01-01

    New technology generally serves two main goals of the automotive industry: one is to enable vehicles to comply with various governmental regulations and the other is to provide a competitive edge in the market. The latter goal can either be served through improved manufacturing and design capabilities, such as computer aided design and computer aided manufacturing, or through improved product performance, such as anti-lock braking (ABS). Although safety features are sometimes customer driven, such as the increasing use of airbags and ABS, most are determined by regulations as outlined by the Federal Motor Vehicle Safety Standards (FMVSS). Other standards, set by the Environmental Protection Agency, determine acceptable levels of emissions and fuel consumption. State governments, such as in California, are also setting precedent standards, such as requiring manufacturers to offer zero-emission vehicles as a certain fraction of their sales in the state. The drive to apply new materials in the automobile stems from the need to reduce weight and improve fuel efficiency. Topics discussed include: new lightweight materials; types of automotive materials; automotive composite applications; the role for composite materials in automotive applications; advantages and disadvantages of composite materials; material substitution economics; economic perspective; production economics; and composite materials production economics.

  17. Identification for automotive systems

    CERN Document Server

    Hjalmarsson, Håkan; Re, Luigi

    2012-01-01

    Increasing complexity and performance and reliability expectations make modeling of automotive system both more difficult and more urgent. Automotive control has slowly evolved from an add-on to classical engine and vehicle design to a key technology to enforce consumption, pollution and safety limits. Modeling, however, is still mainly based on classical methods, even though much progress has been done in the identification community to speed it up and improve it. This book, the product of a workshop of representatives of different communities, offers an insight on how to close the gap and exploit this progress for the next generations of vehicles.

  18. Automotive NVH technology

    CERN Document Server

    Nijman, Eugenius; Priebsch, Hans-Herwig

    2016-01-01

    This book presents seven chapters examining selected noise, vibration and harshness (NVH) topics that are highly relevant for automotive vehicle development. These include applications following the major trends toward increased passenger comfort, vehicle electrification and lightweight design. The authors of the seven chapters, all of which are experts from the automotive industry and academia, present the foremost challenges and potential solutions in this demanding field. Among others, applications for sound optimization in downsized engines, noise optimization in electric powertrains, weight reduction options for exhaust systems, porous materials description, and the vibro-acoustic analysis of geared systems are discussed.

  19. SEE - Sight Effectiveness Enhancement. Results of the automotive evaluation

    DEFF Research Database (Denmark)

    Andersen, V.; Hansen, K.D.; Cathala, T.;

    2006-01-01

    In the SEE project two parallel evaluations have been conducted, an experimental trial of the automotive and another of the aeronautical application. The evaluations have measured the efficiency and HMI (human-machine interaction) characteristics of theSEE prototype. This report covers the...... automotive part of the evaluation. The evaluation of the automotive application was carried out in computer simulated environments and followed the general objectives of the evaluation described in ‘Definition of theEvaluation Plan’ . The field experiment discussed, however, was given up due to lack of...

  20. Bringing Excellence to Automotive

    Science.gov (United States)

    Večeřa, Pavel; Paulová, Iveta

    2012-12-01

    Market situation and development in recent years shows, that organization's ability to meet customer requirements is not enough. Successful organizations are able to exceed the expectations of all stakeholders. They are building their excellence systematically. Our contribution basically how the excellence in automotive is created using EFQM Excellence Model in Total Quality Management.

  1. Automotive Emission Control.

    Science.gov (United States)

    Lee, Billy D.; Ragazzi, Ronald

    This guide designed to assist teachers in improving instruction in the area of automotive emission control curriculum includes four areas. Each area consists of one or more units of instruction, with each instructional unit including some or all of the following basic components: Performance objectives, suggested activities for teacher and…

  2. Automotive Power Trains.

    Science.gov (United States)

    Marine Corps Inst., Washington, DC.

    This correspondence course, originally developed for the Marine Corps, is designed to provide mechanics with an understanding of the operation, maintenance, and troubleshooting of automotive power trains and certain auxiliary equipment. The course contains six study units covering basic power trains; clutch principles and operations; conventional…

  3. 78 FR 14546 - Seagull Maritime Agencies Private Ltd. v. Gren Automotive, Inc., Centrus Automotive Distributors...

    Science.gov (United States)

    2013-03-06

    ... Seagull Maritime Agencies Private Ltd. v. Gren Automotive, Inc., Centrus Automotive Distributors Inc., and... Limited (``SMA''), hereinafter ``Complainant,'' against Gren Automotive, Inc. (``Gren''), Centrus Automotive Distributors Inc. (``Centrus'') and Mr. Liu Shao hereinafter ``Respondents.'' Complainant...

  4. 78 FR 58518 - Notification of Proposed Production Activity; Benteler Automotive Corporation (Automotive...

    Science.gov (United States)

    2013-09-24

    ... Foreign-Trade Zones Board Notification of Proposed Production Activity; Benteler Automotive Corporation (Automotive Suspension and Body Components); Duncan, South Carolina Benteler Automotive Corporation (Benteler... produce automotive suspension components and subassemblies using certain foreign-status components....

  5. FISITA 2012 World Automotive Congress

    CERN Document Server

    2013-01-01

    Proceedings of the FISITA 2012 World Automotive Congress are selected from nearly 2,000 papers submitted to the 34th FISITA World Automotive Congress, which is held by Society of Automotive Engineers of China (SAE-China ) and the International Federation of Automotive Engineering Societies (FISITA). This proceedings focus on solutions for sustainable mobility in all areas of passenger car, truck and bus transportation. Volume 8: Vehicle Design and Testing (II) focuses on: •Automotive Reliability Technology •Lightweight Design Technology •Design for Recycling •Dynamic Modeling •Simulation and Experimental Validation •Virtual Design, Testing and Validation •Testing of Components, Systems and Full Vehicle Above all researchers, professional engineers and graduates in fields of automotive engineering, mechanical engineering and electronic engineering will benefit from this book.   SAE-China is a national academic organization composed of enterprises and professionals who focus on research, design a...

  6. Hydrogen as automotive fuel

    International Nuclear Information System (INIS)

    An assessment of the technical/economic feasibility of the use of hydrogen as an automotive fuel is made based on analyses of the following: the chemical- physical properties of hydrogen in relation to its use in internal combustion engines; the modifications necessary to adapt internal combustion engines to hydrogen use; hydrogen fuel injection systems - with water vapour injection, cryogenic injection, and the low or high pressure injection of hydrogen directly into the combustion chamber; the current commercialization status of hydrogen automotive fuels; energy efficiency ratings; environmental impacts; in-vehicle storage systems - involving the use of hydrides, high pressure systems and liquid hydrogen storage systems; performance in terms of pay-load ratio; autonomous operation; and operating costs. The paper concludes that, considering current costs for hydrogen fuel production, distribution and use, at present, the employment of hydrogen fuelled vehicles is feasible only in highly polluted urban environments where the innovative vehicle's air pollution abatement characteristics would justify its high operating costs as compared with those of conventional automotive alternatives

  7. SITUATION IN RUSSIAN AUTOMOTIVE INDUSTRY AND AUTOMOTIVE MARKET IN CRISIS

    OpenAIRE

    Starkova, Nadezhda; Tolstova, Alisa; Ubogova, Ekaterina

    2015-01-01

    Todays situation of Russian automotive industry and automotive market has been analyzed. Main factors influencing for their position have been revealed, short-term forecast of development has been presented. Directions for stabilization of situation in production and sales of cars in Russia have been formulated.

  8. Automotive mechatronics automotive networking, driving stability systems, electronics

    CERN Document Server

    2015-01-01

    As the complexity of automotive vehicles increases this book presents operational and practical issues of automotive mechatronics. It is a comprehensive introduction to controlled automotive systems and provides detailed information of sensors for travel, angle, engine speed, vehicle speed, acceleration, pressure, temperature, flow, gas concentration etc. The measurement principles of the different sensor groups are explained and examples to show the measurement principles applied in different types. Contents Basics of mechatronics.- Architecture.- Electronic control unit.- Software development.- Basic principles of networking.- Automotive networking.- Bus systems.- Automotive sensors.- Sensor measuring principles.- Sensor types.- Electric actuators.- Electrohydraulic actuators.- Electronic transmission control.- Electronic transmission control unit.- Modules for transmission control.- Antilock braking system.- Traction control system.- Electronic stability program.- Automatic brake functions.- Hydraulic modu...

  9. A Secure Mechanism to Supervise Automotive Sensor Network by Client on Smart Phone

    Directory of Open Access Journals (Sweden)

    T R Yashavanth,

    2013-04-01

    Full Text Available This paper presents a proposal on design of a secureclient on smart phone to monitor automotive sensornetwork. Recently, more and more vehicles, such asBMW X5, are connected from outside via smartphone [3]. From smart phone, users can use theinternetresources in automotive.Users can monitorthe automotives by using their smart phones. Whenthe automotive is moving or stolen byrobber, alertinformation will be reported to users and users caneven brake their automotive via smart phone inemergency status by sending control command tothe vehicle information gateway. So client softwarein smart phone is required to monitor the sensornetwork in automotives.In order to preventmalicious attack on the client software by maliciousattackers which are usually the robbers, thereshould be a mechanism provided to the clientswhich offers security by considering few criteria’slike power of computation, level of security andconsumption of power. This proposed method usesIDEA for the encryption of all the messages since

  10. Embedded Automotive System Development Process

    OpenAIRE

    Langenwalter, Joachim

    2005-01-01

    Model based design enables the automatic generation of final-build software from models for high-volume automotive embedded systems. This paper presents a framework of processes, methods and tools for the design of automotive embedded systems. A steer-by-wire system serves as an example.

  11. Reliability in automotive ethernet networks

    DEFF Research Database (Denmark)

    Soares, Fabio L.; Campelo, Divanilson R.; Yan, Ying;

    2015-01-01

    This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular.......This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular....

  12. Automotive systems engineering

    CERN Document Server

    Winner, Hermann

    2013-01-01

    This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as  “automotive systems engineering”.  These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

  13. The automotive transmission book

    CERN Document Server

    Fischer, Robert; Jürgens, Gunter; Najork, Rolf; Pollak, Burkhard

    2015-01-01

    This book presents essential information on systems and interactions in automotive transmission technology and outlines the methodologies used to analyze and develop transmission concepts and designs. Functions of and interactions between components and subassemblies of transmissions are introduced, providing a basis for designing transmission systems and for determining their potentials and properties in vehicle-specific applications: passenger cars, trucks, buses, tractors, and motorcycles. With these fundamentals the presentation provides universal resources for both state-of-the-art and future transmission technologies, including systems for electric and hybrid electric vehicles.

  14. Automotive battery technology

    CERN Document Server

    Watzenig, Daniel

    2014-01-01

    The use of electrochemical energy storage systems in automotive applications also involves new requirements for modeling these systems, especially in terms of model depth and model quality. Currently, mainly simple application-oriented models are used to describe the physical behavior of batteries. This book provides a step beyond of state-of-the-art modeling showing various different approaches covering following aspects: system safety, misuse behavior (crash, thermal runaway), battery state estimation and electrochemical modeling with the needed analysis (pre/post mortem). All this different approaches are developed to support the overall integration process from a multidisciplinary point-of-view and depict their further enhancements to this process.

  15. The Impact of Technology on Hawaii's Automotive Mechanics: An Analysis with Recommendations. Technological Impact Study Series.

    Science.gov (United States)

    Allen, Robert

    Because of the increasing use of microelectronic componentry in automobiles, vocational educators must reexamine existing automotive mechanics curricula to ensure that they can continue to provide relevant job training. After examining recent trends in the impact of computers and electronics on automotive design and engineering, existing auto…

  16. Tank-automotive robotics

    Science.gov (United States)

    Lane, Gerald R.

    1999-07-01

    To provide an overview of Tank-Automotive Robotics. The briefing will contain program overviews & inter-relationships and technology challenges of TARDEC managed unmanned and robotic ground vehicle programs. Specific emphasis will focus on technology developments/approaches to achieve semi- autonomous operation and inherent chassis mobility features. Programs to be discussed include: DemoIII Experimental Unmanned Vehicle (XUV), Tactical Mobile Robotics (TMR), Intelligent Mobility, Commanders Driver Testbed, Collision Avoidance, International Ground Robotics Competition (ICGRC). Specifically, the paper will discuss unique exterior/outdoor challenges facing the IGRC competing teams and the synergy created between the IGRC and ongoing DoD semi-autonomous Unmanned Ground Vehicle and DoT Intelligent Transportation System programs. Sensor and chassis approaches to meet the IGRC challenges and obstacles will be shown and discussed. Shortfalls in performance to meet the IGRC challenges will be identified.

  17. User discrimination in automotive systems

    Science.gov (United States)

    Makrushin, Andrey; Dittmann, Jana; Vielhauer, Claus; Leich, Marcus

    2011-03-01

    The recently developed dual-view touch screens, which are announced to be installed in cars in a near future, give rise to completely new challenges in human-machine interaction. The automotive system should be able to identify if the driver or the passenger is currently interacting with the touch screen to provide a correct response to the touch. The optical devices, due to availability, acceptance by the users and multifunctional usage, approved to be the most appropriate sensing technology for driver/passenger discrimination. In this work the prototypic optical user discrimination system is implemented in the car simulator and evaluated in the laboratory environment with entirely controlled illumination. Three tests were done for this research. One of them examined if the near-infrared illumination should be switched on around the clock, the second one if there is a difference in discrimination performance between day, twilight and night conditions, and the third one examined how the intensive directional lighting influences the performance of the implemented user discrimination algorithm. Despite the high error rates, the evaluation results show that very simple computer vision algorithms are able to solve complicated user discrimination task. The average error rate of 10.42% (daytime with near-infrared illumination) is a very promising result for optical systems.

  18. The European automotive LPG market

    International Nuclear Information System (INIS)

    The European automotive LPG market could reach at least 4 % of the European fuel market in 2005 versus 1 % in 1990. This would represent a rise of about 35 % in automotive LPG sales (from 2,4 million tonnes in 1997 to 7 million tonnes estimated for 2005). This was underlined by Alain Deleuse, Primagaz group's Marketing Director, in the paper he delivered at the AEGPL Budapest Convention. We publish large excepts of this paper. (author)

  19. FPGA platform for prototyping and evaluation of neural network automotive applications

    Science.gov (United States)

    Aranki, N.; Tawel, R.

    2002-01-01

    In this paper we present an FPGA based reconfigurable computing platform for prototyping and evaluation of advanced neural network based applications for control and diagnostics in an automotive sub-systems.

  20. Making aerospace technology work for the automotive industry - Introduction

    Science.gov (United States)

    Olson, W. T.

    1978-01-01

    In many cases it has been found that advances made in one technical field can contribute to other fields. An investigation is in this connection conducted concerning subjects from contemporary NASA programs and projects which might have relevance and potential usefulness to the automotive industry. Examples regarding aerospace developments which have been utilized by the automotive industry are related to electronic design, computer systems, quality control experience, a NASA combustion scanner and television display, exhaust gas analyzers, and a device for suppressing noise propagated through ducts. Projects undertaken by NASA's center for propulsion and power research are examined with respect to their value for the automotive industry. As a result of some of these projects, a gas turbine engine and a Stirling engine might each become a possible alternative to the conventional spark ignition engine.

  1. MEMS for automotive and aerospace applications

    CERN Document Server

    Kraft, Michael

    2013-01-01

    MEMS for automotive and aerospace applications reviews the use of Micro-Electro-Mechanical-Systems (MEMS) in developing solutions to the unique challenges presented by the automotive and aerospace industries.Part one explores MEMS for a variety of automotive applications. The role of MEMS in passenger safety and comfort, sensors for automotive vehicle stability control applications and automotive tire pressure monitoring systems are considered, along with pressure and flow sensors for engine management, and RF MEMS for automotive radar sensors. Part two then goes on to explore MEMS for

  2. Automotive Sensors and MEMS Technology

    Science.gov (United States)

    Nonomura, Yutaka

    - Automotive sensors are used for emission gas purification, energy conservation, car kinematic performance, safety and ITS (intelligent transportation system). The comparison of the sensor characteristics was made for their application area. Many kinds of the principles are applied for the sensors. There are two types of sensors, such as physical and chemical one. Many of the automotive sensors are physical type such as mechanical sensors. And a gas sensor is a chemical type. The sensors have been remarkably developed with the advancement of the MEMS (Micro Electro Mechanical Systems) technology. In this paper, gas, pressure, combustion pressure, acceleration, magnetic, and angular rate sensors for automotive use are explained with their features. The sensors are key devices to control cars in the engine, power train, chassis and safety systems. The environment resistance, long term reliability, and low cost are required for the automotive sensors. They are very hard to be resolved. However, the sensor technology contributes greatly to improving global environment, energy conservation, and safety. The applications of automotive sensors will be expanded with the automobile developments.

  3. Supplier Selection in the Thai Automotive Industry

    OpenAIRE

    Nopprach, Somsupa

    2006-01-01

    This paper uses agglomeration theory to analyze the impact of Thai government policies on the development of the Thai automotive industry and cluster formation in Central and Eastern Thailand. Using cross-section data on 162 auto-parts suppliers from the Thailand Automotive Directory 2003-2004, the paper examines the criteria of supplier selection in the Thai automotive industry. Using logit models and cross-section data on 162 auto-parts suppliers from the Thailand Automotive Directory 2003-...

  4. Visual comparison testing of automotive paint simulation

    Science.gov (United States)

    Meyer, Gary; Fan, Hua-Tzu; Seubert, Christopher; Evey, Curtis; Meseth, Jan; Schnackenberg, Ryan

    2015-03-01

    An experiment was performed to determine whether typical industrial automotive color paint comparisons made using real physical samples could also be carried out using a digital simulation displayed on a calibrated color television monitor. A special light booth, designed to facilitate evaluation of the car paint color with reflectance angle, was employed in both the real and virtual color comparisons. Paint samples were measured using a multi-angle spectrophotometer and were simulated using a commercially available software package. Subjects performed the test quicker using the computer graphic simulation, and results indicate that there is only a small difference between the decisions made using the light booth and the computer monitor. This outcome demonstrates the potential of employing simulations to replace some of the time consuming work with real physical samples that still characterizes material appearance work in industry.

  5. Aero and vibroacoustics of automotive turbochargers

    CERN Document Server

    Nguyen-Schäfer, Hung

    2013-01-01

    Aero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation.   In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions.  Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill’s analogy, is required to investigate airborne noises produced by turbochargers in passenger vehi...

  6. Active gated imaging for automotive safety applications

    Science.gov (United States)

    Grauer, Yoav; Sonn, Ezri

    2015-03-01

    The paper presents the Active Gated Imaging System (AGIS), in relation to the automotive field. AGIS is based on a fast gated-camera equipped with a unique Gated-CMOS sensor, and a pulsed Illuminator, synchronized in the time domain to record images of a certain range of interest which are then processed by computer vision real-time algorithms. In recent years we have learned the system parameters which are most beneficial to night-time driving in terms of; field of view, illumination profile, resolution and processing power. AGIS provides also day-time imaging with additional capabilities, which enhances computer vision safety applications. AGIS provides an excellent candidate for camera-based Advanced Driver Assistance Systems (ADAS) and the path for autonomous driving, in the future, based on its outstanding low/high light-level, harsh weather conditions capabilities and 3D potential growth capabilities.

  7. Survey of CFD studies on automotive buffeting

    International Nuclear Information System (INIS)

    In the current automobile market buffeting is one of the customer frequent complaints on luxury cars and SUVs. Buffeting is a low frequency but high level wind noise and makes people inside the vehicle uncomfortable if it lasts for a long period of time. The physical mechanism of buffeting is a complicated phenomenon of aeroacoustic resonance. The aeroacoustic characteristics of buffeting depend on vehicle features and operating conditions. In this paper, a survey of CFD studies on the automotive buffeting is presented. Firstly, several buffeting related concepts, such as Helmholtz resonator, flow over a cavity, shear layer instability and vortex shedding, are reviewed and relevant references are listed. Then, a historic survey of the buffeting investigation is made with emphasis on computational studies. As an example, the buffeting studies at DaimlerChrysler are selected to demonstrate the procedure of CFD simulation for automotive buffeting. The procedure is then validated by the correlation with wind tunnel testing. After that the validated procedure is applied to find solutions for buffeting reduction. Finally, some comments on buffeting studies are addressed. (author)

  8. Automotive Technologies. State Competency Profile.

    Science.gov (United States)

    Ohio Board of Regents, Columbus.

    This document, which lists the technical automotive technologies competencies identified by representatives from business, industry, and labor as well as technical educators throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary…

  9. Human factors in automotive innovation

    NARCIS (Netherlands)

    Terken, J.; Ham, J.; Hoedemaeker, M.

    2011-01-01

    Many automotive innovations affect the driver's task and/or the driving experience. In this paper we argue that successful innovation in these cases requires that due attention is given to Human Factors issues in the course of the innovation process. We support this claim by examples from several re

  10. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  11. Automotive Cooling and Lubricating Systems.

    Science.gov (United States)

    Marine Corps Inst., Washington, DC.

    This correspondence course, originally developed for the Marine Corps, is designed to provide new mechanics with a source of study materials to assist them in becoming more proficient in their jobs. The course contains four study units covering automotive cooling system maintenance, cooling system repair, lubricating systems, and lubrication…

  12. RFID-enabled real-time manufacturing for automotive part and accessory suppliers

    OpenAIRE

    Huang, GQ; Qu, T.; Y. Zhang; Yang, HD

    2010-01-01

    Automotive part and accessory manufacturers (APAMs) at the lower tiers of the automotive vertical have been following leading vehicle assemblers in adopting RFID (Radio Frequency Identification) and ubiquitous computing technologies, aiming to alleviate their advanced manufacturing systems. RFID-enabled real-time traceability and visibility facilitate the implementation of advanced strategies such as Just-In-Time (JIT) lean / responsive manufacturing and mass customization (MC). Being typical...

  13. Multi-source and multicore automotive ECUs - OS protection mechanisms and scheduling

    OpenAIRE

    Navet, Nicolas; Monot, Aurélien; Bavoux, Bernard; Simonot-Lion, Françoise

    2010-01-01

    As the demand for computing power is quickly increasing in the automotive domain, car manufacturers and tier-one suppliers are gradually introducing multicore ECUs in their electronic architectures. Additionally, these multicore ECUs offer new features such as higher levels of parallelism which ease the respect of the safety requirements such as the ISO 26262 and the implementation of other automotive use-cases. These new features involve also more complexity in the design, development and ve...

  14. Making aerospace technology work for the automotive industry, introduction

    Science.gov (United States)

    Olson, W. T.

    1978-01-01

    NASA derived technology already in use in the automotive industry include: (1) developments in electronics design, computer systems, and quality control methods for line testing of cars and trucks; (2) a combustion analysis computer program for automotive engine research and development; (3) an infrared scanner and television display for analyzing tire design and performance, and for studying the effects of heat on the service life of V-belts, shock mounts, brakes, and rubber bearings; (4) exhaust gas analyzers for trouble shooting and emissions certification; (5) a device for reducing noise from trucks; and (6) a low cost test vehicle for measuring highway skid resistance. Services offered by NASA to facilitate access to its technology are described.

  15. 16 CFR 306.10 - Automotive fuel rating posting.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Automotive fuel rating posting. 306.10... AUTOMOTIVE FUEL RATINGS, CERTIFICATION AND POSTING Duties of Retailers § 306.10 Automotive fuel rating posting. (a) If you are a retailer, you must post the automotive fuel rating of all automotive fuel...

  16. Energy and Environmental Challenges for the Japanese Automotive Industry

    OpenAIRE

    Sperling, Daniel

    2000-01-01

    The turn of the century is proving to be a period of turmoil and uncertainty for the automotive industry. The industry confronts growing worldwide demands for greater environmental quality, but now benefits from an emerging technological revolution that provides them with the tools to respond effectively to those demands. Rapid innovation is occurring in lightweight materials, various ICE powertrain enhancements made possible by computer controls, energy conversion processes, energy storage, ...

  17. Design of a validation test process of an automotive software

    OpenAIRE

    Awédikian, Roy; Yannou, Bernard

    2010-01-01

    Testing software for defects exhaustively remains a computationally intensive problem. Therefore, deciding when to stop the test of a software product is one of the main issues in software engineering. Introducing fewer defects, detecting defects earlier in the development process and reducing the time to delivery are the primary objectives of software organizations. In particular, we have been working to address this problem within the realm of the automotive suppliers of car-embedded electr...

  18. Automotive Engineering Software

    Science.gov (United States)

    1980-01-01

    Ford Motor Company has made particular use of Computer Program (NASTRAN) NASA Structural Analysis Program which electronically analyzes a computerized design and predicts its reaction to many different conditions of stress and strain. Ford used NASTRAN to analyze the combined torsional bending and axial loading conditions of a new automobile. As a result of the analytical solutions, fewer prototypes had to be built and tested with instant reduction of development time and cost.

  19. GLOBAL PERSPECTIVES IN AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    NICOLETA ISAC

    2010-01-01

    Full Text Available The automotive sector is characterised by a relatively low trade/salesratio. While the production of most automotive producers in the world is spread over variouscountries in the value chain, the brands are still considered to reflect some national identity.Internationalisation strategies may change over the lifecycle of the product and automakerstend to pursue diametrically opposed strategies. In mature markets, it is about managing whatgoes on beneath a static surface; in emerging markets’ dynamic environments, companies muststrategically position themselves to benefit from growth opportunities. However, without theright strategy and execution in mature markets, it is clear that traditional OEMs cannot profitfrom emerging markets-the persistence of structural issues in mature market operationseventually will rob all but the most resilient competitors of the opportunity to compete inemerging markets.

  20. Antenna Arrays and Automotive Applications

    CERN Document Server

    Rabinovich, Victor

    2013-01-01

    This book throws a lifeline to designers wading through mounds of antenna array patents looking for the most suitable systems for their projects. Drastically reducing the research time required to locate solutions to the latest challenges in automotive communications, it sorts and systematizes material on cutting-edge antenna arrays that feature multi-element communication systems with enormous potential for the automotive industry. These new systems promise to make driving safer and more efficient, opening up myriad applications, including vehicle-to-vehicle traffic that prevents collisions, automatic toll collection, vehicle location and fine-tuning for cruise control systems. This book’s exhaustive coverage begins with currently deployed systems, frequency ranges and key parameters. It proceeds to examine system geometry, analog and digital beam steering technology (including "smart" beams formed in noisy environments), maximizing signal-to-noise ratios, miniaturization, and base station technology that ...

  1. Advanced Materials for Automotive Application

    International Nuclear Information System (INIS)

    In this paper some recent material developments will be overviewed mainly from the point of view of automotive industry. In car industry, metal forming is one of the most important manufacturing processes imposing severe restrictions on materials; these are often contradictory requirements, e.g. high strength simultaneously with good formability, etc. Due to these challenges and the ever increasing demand new material classes have been developed; however, the more and more wide application of high strength materials meeting the requirements stated by the mass reduction lead to increasing difficulties concerning the formability which requires significant technological developments as well. In this paper, the recent materials developments will be overviewed from the point of view of the automotive industry

  2. Rejuvenation of automotive fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yu Seung; Langlois, David A.

    2016-08-23

    A process for rejuvenating fuel cells has been demonstrated to improve the performance of polymer exchange membrane fuel cells with platinum/ionomer electrodes. The process involves dehydrating a fuel cell and exposing at least the cathode of the fuel cell to dry gas (nitrogen, for example) at a temperature higher than the operating temperature of the fuel cell. The process may be used to prolong the operating lifetime of an automotive fuel cell.

  3. Automotive stamped part fatigue design

    OpenAIRE

    Caudoux Mélanie; Facchinetti Matteo Luca; Raynal Renaud

    2014-01-01

    Fatigue design of automotive axle parts is of prior concern because of these are high safety parts and they are expected to drive the overall vehicle mass reduction. In this framework, the stamping process is widely used to form axle parts, before assembling them by welding. Consequently, the mechanical and physical characteristics of the blank sheet are modified, having a strong influence on the fatigue behavior. In this paper, we address the consequences of the stamped process on the fatigu...

  4. Noise Radiation from Automotive Turbochargers

    OpenAIRE

    Zhenrui, Wang

    2011-01-01

    Turbochargers are now commonly used in modern automotive engines, which increase the density of air entering the engine to produce more power. This device not only greatly improves the degree of engine efficiency, but also reduces the pollutant emissions. However, one of the important issues which must be considered is the noise from turbochargers. This noise can radiate either after propagation through the intake and exhaust ducts or via induced vibrations in the turbocharger housing. Here t...

  5. CAE ANALYSIS OF AUTOMOTIVE LAMP

    OpenAIRE

    Vaibhav Wakchaure*; G.V.R Seshagiri Rao

    2015-01-01

    This Paper work is focused on the different FE analysis performed for the automotive lamps. Front fog lamp is designed according to the mounting position given in the panel and the light output requirement. In this paper different type of CAE analysis performed to qualify the physical test requirement the objective of this analysis is to find the optimum size design of lamp to qualify the test & output as per customer requirement. In this paper Static, vibration & fatigue analysis...

  6. Applications of thin coatings in automotive industry

    Directory of Open Access Journals (Sweden)

    P. Louda

    2007-09-01

    Full Text Available Purpose: Use of thin coatings in automotive industry give economic and ecological savings. This is evoke by reducing of weight of used construction elements and currently by increasing of their service life and with that connected elevating of nanomaterials manufacture qualities.Design/methodology/approach: In the paper was disscussed the possibility of applications of thin coating in automotive industry.Findings: The paper shows the examples of thin coatings application in automotive industry.Practical implications: Through the assimilation, improvement, and generation of new technologies, the coating community, as a major supplier to the very large automotive industry, will continue to thrive, grow, and maintain its environmental stewardship in the global marketplace.Originality/value: Applications of thin coatings in automotive industry is and with nanotechnology together will be in centre of interest of automotive industry in near future.

  7. United States Automotive Materials Partnership LLC (USAMP)

    Energy Technology Data Exchange (ETDEWEB)

    United States Automotive Materials Partnership

    2011-01-31

    The United States Automotive Materials Partnership LLC (USAMP) was formed in 1993 as a partnership between Chrysler Corporation, Ford Motor Company, and General Motors Corporation. Since then the U.S. Department of Energy (DOE) has supported its activities with funding and technical support. The mission of the USAMP is to conduct vehicle-oriented research and development in materials and materials processing to improve the competitiveness of the U.S. Auto Industry. Its specific goals are: (1) To conduct joint research to further the development of lightweight materials for improved automotive fuel economy; and (2) To work with the Federal government to explore opportunities for cooperative programs with the national laboratories, Federal agencies such as the DOE and universities. As a major component of the DOE's Office of FreedomCAR and Vehicle Technologies Program (FCVT) collaboration with the USAMP, the Automotive Lightweighting Materials (ALM) program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The FCVT was announced in FY 2002 and implemented in FY 2003, as a successor of the Partnership for a New Generation of Vehicles (PNGV), largely addressed under the first Cooperative Agreement. This second USAMP Cooperative Agreement with the DOE has expanded a unique and valuable framework for collaboratively directing industry and government research efforts toward the development of technologies capable of solving important societal problems related to automobile transportation. USAMP efforts are conducted by the domestic automobile manufacturers, in collaboration with materials and manufacturing suppliers, national laboratories, universities, and other technology or trade organizations. These interactions provide a direct route for implementing newly

  8. Simulation based design of automotive systems

    OpenAIRE

    Schiehlen, Werner

    1993-01-01

    The design of automotive systems using simulation tools features cost reduction and quality enhancement. This paper presents two basic approaches. The rust approach deals with the application of CAD data bases to the evaluation of input data for multibody system formalisms, most adequate for automotive system modeling. An object oriented data model for multibody systems is presented. The second approach covers the development of an integrated simulation tool for automotive vehicles and the co...

  9. Applications of thin coatings in automotive industry

    OpenAIRE

    P. Louda

    2007-01-01

    Purpose: Use of thin coatings in automotive industry give economic and ecological savings. This is evoke by reducing of weight of used construction elements and currently by increasing of their service life and with that connected elevating of nanomaterials manufacture qualities.Design/methodology/approach: In the paper was disscussed the possibility of applications of thin coating in automotive industry.Findings: The paper shows the examples of thin coatings application in automotive industr...

  10. Systems thinking in designing automotive textiles

    OpenAIRE

    Sinha, Pammi; Muthu, Subramanian Senthilkannan; Taylor, Iain; Schulz, Rita; Beverley, Katharine J.; Day, Claire L.; Tipi, Nicoleta S.

    2015-01-01

    We present the complexities in terms of designing automotive exterior seating materials (seat coverings and interior linings) at Sage Automotive Interiors (UK), which is a division of a global international automotive textile supplier with headquarters in the US. Sustainability and innovation are emphasized in documents communicating the company’s vision. Using a case study approach, we consider the current design, development and manufacture process and examine it for the potential for feedb...

  11. A Secure Mechanism to Supervise Automotive Sensor Network by Client on Smart Phone

    Directory of Open Access Journals (Sweden)

    T R Yashavanth

    2013-03-01

    Full Text Available This paper presents a proposal on design of a secure client on smart phone to monitor automotive sensor network. Recently, more and more vehicles, such as BMW X5, are connected from outside via smart phone [3]. From smart phone, users can use the internet resources in automotive. Users can monitor the automotives by using their smart phones. When the automotive is moving or stolen by robber, alert information will be reported to users and users can even brake their automotive via smart phone in emergency status by sending control command to the vehicle information gateway. So client software in smart phone is required to monitor the sensor network in automotives. In order to prevent malicious attack on the client software by malicious attackers which are usually the robbers, there should be a mechanism provided to the clients which offers security by considering few criteria’s like power of computation, level of security and consumption of power. This proposed method uses IDEA for the encryption of all the messages since IDEA has high level of security and suitable to implement in software and also demands on computational power is less. Record management set is being suggested for the storage of critical data which is a Java MIDlet based mechanism. Between client software and its gateway a communication management on transaction is also proposed. The verification of the key updating process is verified with model checking in UPPAAL [7].

  12. DYNAMIC TASK SCHEDULING ON MULTICORE AUTOMOTIVE ECUS

    Directory of Open Access Journals (Sweden)

    Geetishree Mishra

    2014-12-01

    Full Text Available Automobile manufacturers are controlled by stringent govt. regulations for safety and fuel emissions and motivated towards adding more advanced features and sophisticated applications to the existing electronic system. Ever increasing customer’s demands for high level of comfort also necessitate providing even more sophistication in vehicle electronics system. All these, directly make the vehicle software system more complex and computationally more intensive. In turn, this demands very high computational capability of the microprocessor used in electronic control unit (ECU. In this regard, multicore processors have already been implemented in some of the task rigorous ECUs like, power train, image processing and infotainment. To achieve greater performance from these multicore processors, parallelized ECU software needs to be efficiently scheduled by the underlaying operating system for execution to utilize all the computational cores to the maximum extent possible and meet the real time constraint. In this paper, we propose a dynamic task scheduler for multicore engine control ECU that provides maximum CPU utilization, minimized preemption overhead, minimum average waiting time and all the tasks meet their real time deadlines while compared to the static priority scheduling suggested by Automotive Open Systems Architecture (AUTOSAR

  13. Dynamic Task Scheduling on Multicore Automotive ECUs

    Directory of Open Access Journals (Sweden)

    Geetishree Mishra

    2014-12-01

    Full Text Available Automobile manufacturers are controlled by stringen t govt. regulations for safety and fuel emissions a nd motivated towards adding more advanced features and sophisticated applications to the existing electro nic system. Ever increasing customer’s demands for high level of comfort also necessitate providing even m ore sophistication in vehicle electronics system. All t hese, directly make the vehicle software system mor e complex and computationally more intensive. In turn , this demands very high computational capability o f the microprocessor used in electronic control unit (ECU. In this regard, multicore processors have already been implemented in some of the task rigoro us ECUs like, power train, image processing and infotainment. To achieve greater performance from t hese multicore processors, parallelized ECU softwar e needs to be efficiently scheduled by the underlayin g operating system for execution to utilize all the computational cores to the maximum extent possible and meet the real time constraint. In this paper, w e propose a dynamic task scheduler for multicore engi ne control ECU that provides maximum CPU utilization, minimized preemption overhead, minimum average waiting time and all the tasks meet their real time deadlines while compared to the static pr iority scheduling suggested by Automotive Open Syst ems Architecture (AUTOSAR.

  14. 8th DFO Automotive conference - European automotive coating

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The present CD-ROM of the DFO Conference ''European Automotive Coating'' held on the 14th and 15th May 2001 in Dresden, Germany, contents the following contributions: Contents (1) Plenary Lecture-Car Body Painting in the Digital Factory (2) Off-line painting of a smc Oe tailgate in topcoat colour; (3) Twincure UV - New Concepts for the Surface Treatment of Glass-Fiber-Reinforced; Plastics; (4) New Concepts for Exterior Coating - ''Funktionsschicht 3'' First Experiences and the ''Ludwigsfelde Concept''; (5) Application techniques in the light of new automation concepts in automotive painting; (6) Automatic Management System for Car Body Pretreatment; (7) Surface Inspection on Bodies in White in Automotive Industry; (8) Online Measurement and Control of E-coat Bath Parameters in a Car Body Paint Shop - Development until Maturity for Manufacturing - Practical Experiences; (9) Automated Process Diagnosis; (10) Wavescan DOI Oe Challenge or Data Overkill; (11) Robot Aided Online Metrology for Quality Assurance and Process Control of Coated Surfaces; (12) Physical Simulation of Film Thickness Distribution and Transfer Efficiency in the Electrostatically Supported Painting process; (13) Offline Simulation of the Coating Process with High-Speed Bell and Pneumatic Atomizers; (14) Top coat simulation - First applications and results; (15) Virtual color design. (AKF) (orig.) [German] Die vorliegende zweisprachige (Deutsch/Englisch) CD-ROM der DFO-Tagung ''European Automotive Coating'' vom 14. und 15. Mai 2001 beinhaltet die folgenden Beitraegen: Inhaltsverzeichnis (1) Leitvortrag ''Die Automobillackierung in der digitalen Fabrik''; (2) Off-line Lackierung von SMC-Heckklappen in Decklackfarbe; (3) Hybrid UV-Haertung - Neue Konzepte zur Oberflaechenveredelung von glasfaserverstaerkten Duroplasten; (4) Neue Konzepte fuer die Aussenhautlackierung - Fukntionsschicht 3 - Erste

  15. Sensor Data Fusion in Automotive Applications

    OpenAIRE

    Lytrivis, Panagiotis; Thomaidis, George; Amditis, Angelos

    2009-01-01

    This chapter has summarized the state-of-the-art in sensor data fusion for automotive applications, showing that this is a relatively new discipline in the automotive research area, compared to signal processing, image processing or radar processing. Thus, there is a

  16. A comprehensive framework for automotive sustainability assessment

    OpenAIRE

    Jasinski, D.; Meredith, J.; Kirwan, K.

    2016-01-01

    Business efficiency, stakeholder pressure and the need for legislative compliance compel the automotive sector to design and manufacture fuel-efficient, low-impact, environmentally responsible and sustainable vehicles. Managing and responding to these multiple and sometimes conflicting interests requires the measurement of economic, environmental and societal performance. Although a number of automotive sustainability measures are mentioned within the literature, there is no singl...

  17. 77 FR 37471 - National Automotive Sampling System

    Science.gov (United States)

    2012-06-21

    ... complete Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477-78) or you... National Highway Traffic Safety Administration National Automotive Sampling System AGENCY: National Highway... comments. SUMMARY: The NHTSA is conducting a comprehensive review of the National Automotive...

  18. Using Technology to Enhance an Automotive Program

    Science.gov (United States)

    Ashton, Denis

    2009-01-01

    Denis Ashton uses technology in his automotive technology program at East Valley Institute of Technology (EVIT) to positively impact student outcomes. Ashton, the department chair for the automotive programs at EVIT, in Mesa, Arizona, says that using an interactive PowerPoint curriculum makes learning fun for students and provides immediate…

  19. Advances in automotive control 2001

    Energy Technology Data Exchange (ETDEWEB)

    Kiencke, U.; Gissinger, G.L. (eds.)

    2001-07-01

    The aim of the 3rd IFAC Workshop 'Advances in Automotive Control', held in Karlsruhe, Germany on 28-30 March 2001, was to discuss the latest advances in relation to motor vehicles. The increase in road traffic in the 20th century was a major problem, and one of the challenges of the 21st century will be to improve driving safety and comfort. The proceedings covers: driveline control; driveline modelling; vehicle dynamics; electronic architecture; intelligent components; engine control; diagnostics; subsystems; engine modelling; and modelling of combustion and turbo-charging. 28 of the papers are abstracted here.

  20. Process Modeling of Low-Pressure Die Casting of Aluminum Alloy Automotive Wheels

    Science.gov (United States)

    Reilly, C.; Duan, J.; Yao, L.; Maijer, D. M.; Cockcroft, S. L.

    2013-09-01

    Although on initial inspection, the aluminum alloy automotive wheel seems to be a relatively simple component to cast based on its shape, further insight reveals that this is not the case. Automotive wheels are in a select group of cast components that have strict specifications for both mechanical and aesthetic characteristics due to their important structural requirements and their visibility on a vehicle. The modern aluminum alloy automotive wheel continues to experience tightened tolerances relating to defects to improve mechanical performance and/or the physical appearance. Automotive aluminum alloy wheels are assessed against three main criteria: wheel cosmetics, mechanical performance, and air tightness. Failure to achieve the required standards in any one of these categories will lead to the wheel either requiring costly repair or being rejected and remelted. Manufacturers are becoming more reliant on computational process modeling as a design tool for the wheel casting process. This article discusses and details examples of the use of computational process modeling as a predictive tool to optimize the casting process from the standpoint of defect minimization with the emphasis on those defects that lead to failure of aluminum automotive wheels, namely, macroporosity, microporosity, and oxide films. The current state of applied computational process modeling and its limitations with regard to wheel casting are discussed.

  1. Automotive Battery Modelling and Management

    Directory of Open Access Journals (Sweden)

    N. M. Hammad

    2014-06-01

    Full Text Available The estimation of vehicle battery performance is typically addressed by testing the battery under specific operation conditions by using a model to represent the test results. Approaches for representing test results range from simple statistical models to neural networks to complex, physics-based models. Basing the model on test data could be problematical when testing becomes impractical with many years life time tests. So, real time estimation of battery performance, an important problem in automotive applications, falls into this area. In vehicles it is important to know the state of charge of the batteries in order to prevent vehicle stranding and to ensure that the full range of the vehicle operation is exploited. In this paper, several battery models have studied including analytical, electrical circuits, stochastic and electro- chemical models. Valve Regulated Lead Acid “VRLA” battery has been modelled using electric circuit technique. This model is considered in the proposed Battery Monitoring System “BMS”. The proposed BMS includes data acquisition, data analysis and prediction of battery performance under a hypothetical future loads. Based on these criteria, a microprocessor based BMS prototype had been built and tested in automotive Lab,. The tests show promising results that can be used in industrial applications

  2. Automotive stamped part fatigue design

    Directory of Open Access Journals (Sweden)

    Caudoux Mélanie

    2014-06-01

    Full Text Available Fatigue design of automotive axle parts is of prior concern because of these are high safety parts and they are expected to drive the overall vehicle mass reduction. In this framework, the stamping process is widely used to form axle parts, before assembling them by welding. Consequently, the mechanical and physical characteristics of the blank sheet are modified, having a strong influence on the fatigue behavior. In this paper, we address the consequences of the stamped process on the fatigue design and how they may be effectively taken into account in the automotive industry. Actually, the coupling between the stamping process and the fatigue design is under development at PSA Peugeot Citroën Company since several years. Such an analysis deals with some major topics: thickness variation, plastic hardening and deformation, and residual stress. All of these ingredients result in fatigue criteria evolutions: it is important to stress that the stamping process can have advantageous or disadvantageous consequences on the fatigue design. This is here highlighted on some examples, dealing with front and rear axles.

  3. The Quantitative Analysis of Chennai Automotive Industry Cluster

    Science.gov (United States)

    Bhaskaran, Ethirajan

    2016-05-01

    Chennai, also called as Detroit of India due to presence of Automotive Industry producing over 40 % of the India's vehicle and components. During 2001-2002, the Automotive Component Industries (ACI) in Ambattur, Thirumalizai and Thirumudivakkam Industrial Estate, Chennai has faced problems on infrastructure, technology, procurement, production and marketing. The objective is to study the Quantitative Performance of Chennai Automotive Industry Cluster before (2001-2002) and after the CDA (2008-2009). The methodology adopted is collection of primary data from 100 ACI using quantitative questionnaire and analyzing using Correlation Analysis (CA), Regression Analysis (RA), Friedman Test (FMT), and Kruskall Wallis Test (KWT).The CA computed for the different set of variables reveals that there is high degree of relationship between the variables studied. The RA models constructed establish the strong relationship between the dependent variable and a host of independent variables. The models proposed here reveal the approximate relationship in a closer form. KWT proves, there is no significant difference between three locations clusters with respect to: Net Profit, Production Cost, Marketing Costs, Procurement Costs and Gross Output. This supports that each location has contributed for development of automobile component cluster uniformly. The FMT proves, there is no significant difference between industrial units in respect of cost like Production, Infrastructure, Technology, Marketing and Net Profit. To conclude, the Automotive Industries have fully utilized the Physical Infrastructure and Centralised Facilities by adopting CDA and now exporting their products to North America, South America, Europe, Australia, Africa and Asia. The value chain analysis models have been implemented in all the cluster units. This Cluster Development Approach (CDA) model can be implemented in industries of under developed and developing countries for cost reduction and productivity

  4. The Quantitative Analysis of Chennai Automotive Industry Cluster

    Science.gov (United States)

    Bhaskaran, Ethirajan

    2016-07-01

    Chennai, also called as Detroit of India due to presence of Automotive Industry producing over 40 % of the India's vehicle and components. During 2001-2002, the Automotive Component Industries (ACI) in Ambattur, Thirumalizai and Thirumudivakkam Industrial Estate, Chennai has faced problems on infrastructure, technology, procurement, production and marketing. The objective is to study the Quantitative Performance of Chennai Automotive Industry Cluster before (2001-2002) and after the CDA (2008-2009). The methodology adopted is collection of primary data from 100 ACI using quantitative questionnaire and analyzing using Correlation Analysis (CA), Regression Analysis (RA), Friedman Test (FMT), and Kruskall Wallis Test (KWT).The CA computed for the different set of variables reveals that there is high degree of relationship between the variables studied. The RA models constructed establish the strong relationship between the dependent variable and a host of independent variables. The models proposed here reveal the approximate relationship in a closer form. KWT proves, there is no significant difference between three locations clusters with respect to: Net Profit, Production Cost, Marketing Costs, Procurement Costs and Gross Output. This supports that each location has contributed for development of automobile component cluster uniformly. The FMT proves, there is no significant difference between industrial units in respect of cost like Production, Infrastructure, Technology, Marketing and Net Profit. To conclude, the Automotive Industries have fully utilized the Physical Infrastructure and Centralised Facilities by adopting CDA and now exporting their products to North America, South America, Europe, Australia, Africa and Asia. The value chain analysis models have been implemented in all the cluster units. This Cluster Development Approach (CDA) model can be implemented in industries of under developed and developing countries for cost reduction and productivity

  5. COP Prediction of an ejector refrigeration cycle combined with a vapour compression cycle for automotive air conditioning

    OpenAIRE

    Nat Suvarnakuta; Nutthanun Keerlatiyadatanapat; Thanarath Sriveerakul

    2014-01-01

    This paper presents the COP prediction of an ejector refrigeration cycle combined with a vapour compression cycle for automotive air conditioning. Using computational fluid dynamics (CFD) technique, the performance of an ejector was analyzed in term of the entrainment ratio (Rm) and critical back pressure (CBP). The results from this study were compared with a previous study of combined ejector refrigeration system for automotive air conditioning application [1] which the entrainment ratio (R...

  6. Green innovation adoption in automotive supply chain

    DEFF Research Database (Denmark)

    Zailani, Suhaiza; Govindan, Kannan; Iranmanesh, Mohammad;

    2015-01-01

    Green innovation has currently been receiving a great deal of international attention because of the growing concern of consumers, governments, and the community as a whole with regard to the degradation of natural resources and environmental pollution. The automotive sector is one of the leading...... generators of industrial waste that affect the quality of the natural environment. This study aims to investigate the determinants of green innovation adoption and its effect on firm performance. Data were gathered by surveying 153 firms in the Malaysian automotive supply chain industry. Data were analyzed......). These results have important implications for designing strategic plans for the Malaysian automotive industry....

  7. Technology Transfer in the Global Automotive Value Chain. Lessons from the Turkish Automotive Industry

    OpenAIRE

    M. Teoman Pamukçu; Alper Sönmez

    2011-01-01

    The automotive industry is one of the main contributors to value added, employment and exports of the Turkish economy and it has undergone major changes since the mid-nineties. Most of the automotive manufacturers in Turkey are either joint ventures or wholly-owned affiliates of multinational companies. Literature on global value chains point to the possibility of technology transfer occurring through backward linkages from automotive manufacturers to their suppliers. We test for the existenc...

  8. Does Automotive Service Excellence (ASE) Certification Enhance Job Performance of Automotive Service Technicians?

    OpenAIRE

    Kolo, Emmanuel

    2006-01-01

    The purpose of this study was to determine if Automotive Service Excellence (ASE) certification of automotive service technicians in independent dealerships enhanced job performance. Descriptive survey methodology was used to gather information for 100 automotive technicians (50 ASE-certified and 50 non-certified technicians) located in 50 different work sites. Each siteâ s service manager was asked to complete a questionnaire and a rating scale for two technicians, one ASE certified and on...

  9. Parametric studies on automotive radiators

    International Nuclear Information System (INIS)

    This paper presents a set of parametric studies performed on automotive radiators by means of a detailed rating and design heat exchanger model developed by the authors. This numerical tool has been previously verified and validated using a wide experimental data bank. A first part of the analysis focuses on the influence of working conditions on both fluids (mass flows, inlet temperatures) and the impact of the selected coolant fluid. Following these studies, the influence of some geometrical parameters is analysed (fin pitch, louver angle) as well as the importance of coolant flow lay-out on the radiator global performance. This work provides an overall behaviour report of automobile radiators working at usual range of operating conditions, while significant knowledge-based design conclusions have also been reported. The results show the utility of this numerical model as a rating and design tool for heat exchangers manufacturers, being a reasonable compromise between classic ε - NTU methods and CFD

  10. CONCEPT MODELING TECHNIQUES FOR THE DESIGN OF AUTOMOTIVE STRUCTURES

    OpenAIRE

    Pavlina Georgieva Brandiska

    2013-01-01

    During the last decades the overall trend in the automotive industry has been to shorten the design cycles and decrease the production costs while increasing the product quality with respect to competitors. In such a context there is an ever growing need for analysis that leads the design process from the concept phase onward. On the other hand, a conventional Finite Element (FE) model of a vehicle can be created only when its detailed Computer-Aided Design (CAD) model is available, which aut...

  11. Fatigue analysis of welding seams in automotive structures

    International Nuclear Information System (INIS)

    For lightweight automotive structures, the stiffness and the fatigue behavior is greatly influenced by the properties of the joints. The joining technology used and the number and locations of the joints are of high importance for both engineers and cost accountants. An overview of common computational procedures including European and national standards is given for the assessments of the fatigue behavior of thin sheet structures with arc welds. The influence of the quality and size of finite shell elements on the fatigue results are investigated and it is shown how this influence can be minimized. (author)

  12. Nonlinear estimation and control of automotive drivetrains

    CERN Document Server

    Chen, Hong

    2014-01-01

    Nonlinear Estimation and Control of Automotive Drivetrains discusses the control problems involved in automotive drivetrains, particularly in hydraulic Automatic Transmission (AT), Dual Clutch Transmission (DCT) and Automated Manual Transmission (AMT). Challenging estimation and control problems, such as driveline torque estimation and gear shift control, are addressed by applying the latest nonlinear control theories, including constructive nonlinear control (Backstepping, Input-to-State Stable) and Model Predictive Control (MPC). The estimation and control performance is improved while the calibration effort is reduced significantly. The book presents many detailed examples of design processes and thus enables the readers to understand how to successfully combine purely theoretical methodologies with actual applications in vehicles. The book is intended for researchers, PhD students, control engineers and automotive engineers. Hong Chen is a professor at the State Key Laboratory of Automotive Simulation and...

  13. Fatal exit the automotive black box debate

    CERN Document Server

    Kowalick, Tom

    2005-01-01

    "Fatal Exit: The Automotive Black Box Debate cuts through thirty years of political wrangling and institutional biases to provide an argument for the Motor Vehicle Event Data Recorder (MVEDR). This automotive equivalent of an airplane's flight recorder or black box is intended to solve the mysteries of car crashes and improve the safety of our roads. The reader is taken inside the automotive industry and the government highway safety establishment to foster an understanding of the politics and the positions on all sides of this safety debate. The author takes an unbiased approach, chronologically presenting each argument and uncovering the agendas and mandates of each of the stakeholders." "This publication is essential reading for all consumers who need to have their voices heard on this critical issue, as well as for attorneys, public safety advocates, public policy administrators, engineers, automotive professionals, journalists, and insurance executives."--Jacket.

  14. Sustainable automotive energy system in China

    CERN Document Server

    CAERC, Tsinghua University

    2014-01-01

    This book identifies and addresses key issues of automotive energy in China. It covers demography, economics, technology and policy, providing a broad perspective to aid in the planning of sustainable road transport in China.

  15. Sound field control in the automotive environment

    OpenAIRE

    Cheer, Jordan; Elliott, Stephen; Jung, Woomin

    2015-01-01

    Active control of engine and road noise in the automotive environment has been investigated within the automotive industry for around 20 years. This interest is due to both the potential to reduce vehicle noise, and the ability to remove passive noise control treatments and, therefore, improve fuel efficiency. The most successful commercial systems have generally used the loudspeakers of the car audio system to globally control engine or road noise at low frequencies. It is also possible to u...

  16. Super High Strength Steel for automotive applications

    OpenAIRE

    CONFENTE, Mario; SCHNEIDER, Emmanuel; BOMONT, Olivier; LESCALIER, Christophe; BOMONT-ARZUR, Anne

    2008-01-01

    Intensive weight savings and out-sizing programs are developed in automotive industry and lead to increase the mechanical properties of the material of the automotive parts. ArcelorMittal has developed specific steel grades known as Super High Strength Steels which are designed for both high ductility and toughness and fatigue resistance. This paper investigates machinability for a drilling operation using an experimental methodology. One of the materials is a new low bainitic steel grade. Ex...

  17. Virtual Tryout Technologies for Preparing Automotive Manufacturing

    OpenAIRE

    Takahashi, Susumu

    2012-01-01

    It is important to reduce the weight of the automotive and to shorten the development period for reduction of CO2 discharge. For these purpose, virtual tryout technologies have been introduced automotive industry. Every process from stamping to assembly for car development has introduced CAD design and numerical simulation such as forming simulation, dimensional accuracy simulation such as forming simulation, dimensional accuracy simulation and so on. In this paper, sheet metal forming simula...

  18. Automotive perspective on laser material processing

    International Nuclear Information System (INIS)

    In this paper a broad review is given of the development and use of laser processing in the automotive industry. a brief introduction to the major types of processing lasers and related systems is followed by a summary of the major processing regimes. Examples are given of the automotive industry's use of lasers in a variety of applications, from heat treating and welding, to cutting and marking

  19. INFLUENCE OF AUTOMOTIVE CLUSTERS IN REGIONAL DEVELOPMENT

    OpenAIRE

    Constantin BORDEI

    2014-01-01

    This paper proposes an overview of the evolution in the automotive sector in the process of regional development. The fundamental changes made by the component supplier sector improved the regional development and manufacturing process. Automotive industry is one of the modern sectors in many countries that benefits of a high technology impact and creates jobs that reduces unemployment across Europe. The auto industry changed cities, regions and countries into poles of development and it beco...

  20. Architecting and Modeling Automotive Embedded Systems

    OpenAIRE

    Larses, Ola

    2005-01-01

    Dealing properly with electronics and software will be a strong competitive advantage in the automotive sector in the near future. Electronics are driving current innovations and are at the same time becoming a larger part of the cost of the vehicle. In order to be successful as an automotive manufacturer, innovations must be introduced in the vehicle without compromising the final price tag. Also, the electronics has to compete with, and win over, the dependability of well known and proven m...

  1. Operationalising luxury in the premium automotive industry

    OpenAIRE

    Bridle, Bernadette

    2010-01-01

    This thesis presents an Action Research project investigating the use of customers’ perceptions of premium and luxury cars within the premium automotive industry. The research was sponsored by Jaguar Land Rover (JLR), a UK-based automotive manufacturer. An inductive, phenomenological approach was adopted in which JLR’s Premiumness Research Programme (PRP) was used as a case study to build an understanding of the consumer’s perception of luxury, to discover how to communic...

  2. Comparative Advantage in the Asian Automotive Industry

    OpenAIRE

    Somsupa Nopprach

    2010-01-01

    This paper seeks to analyze determinants of Asian countries' comparative advantage in the automotive industry. The effects of supporting industries, factor availability, factor intensity, transportation costs, and of the scale of foreign investment in the industry on the level of countries' comparative advantage are on focus. The results highlight the importance of strong supporting industries in raising a country's comparative advantage in the automotive industry. Furthermore, it is found th...

  3. A heat exchanger analogy of automotive paint ovens

    International Nuclear Information System (INIS)

    Computational prediction of vehicle temperatures in an automotive paint oven is essential to predict paint quality and manufacturability. The complex geometry of vehicles, varying scales in the flow, transient nature of the process, and the tightly coupled conjugate heat transfer render the numerical models computationally very expensive. Here, a novel, simplified model of the oven is developed using an analogy to a three-stream cross flow heat exchanger that transfers heat from air to a series of moving bodies and supporting carriers. The analogous heat exchanger equations are developed and solved numerically. Steady state Computational Fluid Dynamics (CFD) simulations are carried out to model the flow field and to extract the heat transfer coefficients around the body and carriers. The air temperature distribution from the CFD models is used as a boundary condition in the analogous model. Correction coefficients are used in the analogy to take care of various assumptions. These are determined from existing test data. The same corrections are used to predict air temperatures for a modified configuration of the oven and a different vehicle. The method can be used to conduct control volume analysis of ovens to determine energy efficiency, and to study new vehicle or oven designs. -- Highlights: • Analogy of an automotive paint oven as a three stream cross flow heat exchanger. • The three streams are vehicle bodies, carriers and hot air. • Convection coefficients and inlet air stream temperatures from steady CFD simulations. • Analogy useful for overall energy efficiency analysis of conveyor ovens in general

  4. Automotive fuels from biomass via gasification

    International Nuclear Information System (INIS)

    There exists already a market of bio-automotive fuels i.e. bioethanol and biodiesel produced from food crops in many countries. From the viewpoint of economics, environment, land use, water use and chemical fertilizer use, however, there is a strong preference for the use of woody biomass and various forest/agricultural residues as the feedstock. Thus, the production of 2nd generation of bio-automotive fuels i.e. synthetic fuels such as methanol, ethanol, DME, FT-diesel, SNG and hydrogen through biomass gasification seems promising. The technology of producing synthetic fuels is well established based on fossil fuels. For biomass, however, it is fairly new and the technology is under development. Starting from the present market of the 1st generation bio-automotive fuels, this paper is trying to review the technology development of the 2nd generation bio-automotive fuels from syngas platform. The production of syngas is emphasized which suggests appropriate gasifier design for a high quality syngas production. A number of bio-automotive fuel demonstration plant will be presented, which gives the state of the art in the development of BTS (biomass to synthetic fuels) technologies. It can be concluded that the 2nd generation bio-automotive fuels are on the way to a breakthrough in the transport markets of industrial countries especially for those countries with a strong forest industry. (author)

  5. Automotive Electrical and Electronic System II; Automotive Mechanics-Intermediate: 9045.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This automotive electrical and electronic system course is an intermediate course designed for the student who has completed automotive Electrical and Electronic System I. The theory and principles of operation of the components of the starting and charging systems and other electrical accessory systems in the automobile will be learned by the…

  6. 75 FR 34170 - Plastic Omnium Automotive Exteriors, LLC, Anderson, SC; Plastic Omnium Automotive Exteriors, LLC...

    Science.gov (United States)

    2010-06-16

    ..., South Carolina. The notice was published in the Federal Register April 23, 2010 (75 FR 21356). The... Employment and Training Administration Plastic Omnium Automotive Exteriors, LLC, Anderson, SC; Plastic Omnium Automotive Exteriors, LLC, Troy, MI; Amended Certification Regarding Eligibility To Apply for...

  7. Automotive-adept: a lightweight assessment method for the automotive Irish software industry

    OpenAIRE

    Mc Caffery, Fergal; Richardson, Ita; Moller, Peter

    2007-01-01

    peer-reviewed In this paper we describe how a lightweight assessment method was developed to educate Irish software small-to-medium sized enterprises (SMEs)1 in relation to becoming automotive software suppliers. The main goal of this assessment method is to provide software SMEs with a SPI path to becoming automotive software suppliers.

  8. Design of an FMCW radar baseband signal processing system for automotive application.

    Science.gov (United States)

    Lin, Jau-Jr; Li, Yuan-Ping; Hsu, Wei-Chiang; Lee, Ta-Sung

    2016-01-01

    For a typical FMCW automotive radar system, a new design of baseband signal processing architecture and algorithms is proposed to overcome the ghost targets and overlapping problems in the multi-target detection scenario. To satisfy the short measurement time constraint without increasing the RF front-end loading, a three-segment waveform with different slopes is utilized. By introducing a new pairing mechanism and a spatial filter design algorithm, the proposed detection architecture not only provides high accuracy and reliability, but also requires low pairing time and computational loading. This proposed baseband signal processing architecture and algorithms balance the performance and complexity, and are suitable to be implemented in a real automotive radar system. Field measurement results demonstrate that the proposed automotive radar signal processing system can perform well in a realistic application scenario. PMID:26811804

  9. Improvements in automotive fuel economy

    Energy Technology Data Exchange (ETDEWEB)

    Borcherts, R.H.; Stadler, H.L.; Brehob, W.M.; Auiler, J.E.

    1978-01-01

    Significant improvements in automotive fuel economy can be obtained by reductions in weight, aerodynamic drag (better streamlining) and rolling resistance (tire improvements) as well as improvements in engine and powertrain efficiency. As applied to a six-passenger 3700 lb present day vehicle powered with a 250 CID six-cylinder engine through an automatic transmission, the improvements in EPA M/H fuel economy for 1% reductions in either weight, aerodynamic drag or rolling resistance are projected to be 0.75%, 0.35% and 0.28% respectively. This is under the constraints of constant performance and equal emissions. The extent to which large changes in these parameters can be obtained resulting in significant improvements in fuel economy depends not only upon solving manufacturing and technical problems related to costs but also upon government regulations and customer acceptance in the marketplace. If large reductions in these parameters could be accomplished along with realistic improvements in engine and powertrain efficiency, significant improvements in fuel economy could be achieved.

  10. Automotive Stirling Engine Development Project

    Science.gov (United States)

    Ernst, William D.; Shaltens, Richard K.

    1997-01-01

    The development and verification of automotive Stirling engine (ASE) component and system technology is described as it evolved through two experimental engine designs: the Mod 1 and the Mod 2. Engine operation and performance and endurance test results for the Mod 1 are summarized. Mod 2 engine and component development progress is traced from the original design through hardware development, laboratory test, and vehicle installation. More than 21,000 hr of testing were accomplished, including 4800 hr with vehicles that were driven more dm 59,000 miles. Mod 2 engine dynamometer tests demonstrated that the engine system configuration had accomplished its performance goals for power (60 kW) and efficiency (38.5%) to within a few percent. Tests with the Mod 2 engine installed in a delivery van demonstrated combined metro-highway fuel economy improvements consistent with engine performance goals and the potential for low emission levels. A modified version of the Mod 2 has been identified as a manufacturable design for an ASE. As part of the ASE project, the Industry Test and Evaluation Program (ITEP), NASA Technology Utilization (TU) project, and the industry-funded Stirling Natural Gas Engine program were undertaken to transfer ASE technology to end users. The results of these technology transfer efforts are also summarized.

  11. Advanced automotive diesel assessment program

    Science.gov (United States)

    Sekar, R.; Tozzi, L.

    1983-01-01

    Cummins Engine Company completed an analytical study to identify an advanced automotive (light duty) diesel (AAD) power plant for a 3,000-pound passenger car. The study resulted in the definition of a revolutionary diesel engine with several novel features. A 3,000-pound car with this engine is predicted to give 96.3, 72.2, and 78.8 MPG in highway, city, and combined highway-city driving, respectively. This compares with current diesel powered cars yielding 41.7, 35.0, and 37.7 MPG. The time for 0-60 MPH acceleration is 13.9 sec. compared to the baseline of 15.2 sec. Four technology areas were identified as crucial in bringing this concept to fruition. They are: (1) part-load preheating, (2) positive displacement compounding, (3) spark assisted diesel combustion system, and (4) piston development for adiabatic, oilless diesel engine. Marketing and planning studies indicate that an aggressive program with significant commitment could result in a production car in 10 years from the date of commencement.

  12. Green competitiveness research on Chinese automotive enterprises

    Directory of Open Access Journals (Sweden)

    Yuanhui Li

    2014-05-01

    Full Text Available Purpose: More and more executives of automobileindustry in China start to recognize the concept of green competitiveness recently. However, relatively less research attention has been devoted to the consideration of measurement. This paper aims to find empirical approach to quantify green competitiveness for automotive enterprises. The connotation of green competitiveness is explored and one suite of evaluation index system has been proposed with four dimensions including environmental, resource, capability and knowledge.Design/methodology/approach: By introducing the factor analysis method, green competitiveness has been measured through an empirical analysis of 24 automotive enterprises within China.Findings: The results indicate that those elements, such as enterprise resource possession and utilization; environment, responsibility and knowledge; profitability; management efficiency, have significant effect on the green competitiveness for automotive enterprises. The further analysis also unveils the advantages and disadvantages of green competitiveness for each company and the direction for improvement.Research limitations/implications: Guide regulators and managers of automobile industry to take some measures to enhance their green competitive advantage.Practical implications: Provide practical methods to measure green competitiveness for automotive enterprises.Originality/value: This paper proposes an evaluation index system of green competitiveness for automotive enterprises. The suggestions of our research will be beneficial to enterprise executives and industry regulators.

  13. Electrohydraulic Forming of Near-Net Shape Automotive Panels

    Energy Technology Data Exchange (ETDEWEB)

    Golovaschenko, Sergey F.

    2013-09-26

    The objective of this project was to develop the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures. Pulsed pressure is created via a shockwave generated by the discharge of high voltage capacitors through a pair of electrodes in a liquid-filled chamber. The shockwave in the liquid initiated by the expansion of the plasma channel formed between two electrodes propagates towards the blank and causes the blank to be deformed into a one-sided die cavity. The numerical model of the EHF process was validated experimentally and was successfully applied to the design of the electrode system and to a multi-electrode EHF chamber for full scale validation of the process. The numerical model was able to predict stresses in the dies during pulsed forming and was validated by the experimental study of the die insert failure mode for corner filling operations. The electrohydraulic forming process and its major subsystems, including durable electrodes, an EHF chamber, a water/air management system, a pulse generator and integrated process controls, were validated to be capable to operate in a fully automated, computer controlled mode for forming of a portion of a full-scale sheet metal component in laboratory conditions. Additionally, the novel processes of electrohydraulic trimming and electrohydraulic calibration were demonstrated at a reduced-scale component level. Furthermore, a hybrid process combining conventional stamping with EHF was demonstrated as a laboratory process for a full-scale automotive panel formed out of AHSS material. The economic feasibility of the developed EHF processes was defined by developing a cost model of the EHF process in comparison to the conventional stamping process.

  14. The Prospect of Mass Customisation in the Chinese Automotive Industry

    OpenAIRE

    Dong, Xihan

    2011-01-01

    The automotive industry is one of the largest manufacturing industries and the development of a country’s automotive industry can represent its economy to some extent. Because of the fierce competition in the automotive industry, customers have more choices and they cannot be satisfied with standard products any more. Therefore, some global automotive manufacturers implement mass customisation as their production strategy which aims to provide customised automobiles according to customers’ re...

  15. Innovation in the Automotive Sector of the Philippines

    OpenAIRE

    Quimba, Francis Mark A.; Rosellon, Maureen Ane D.

    2011-01-01

    The performance of the Philippine automotive industry has steadily improved after the Asian crisis. However, relative to the performance of the automotive industry in other countries, the automotive sector in the country has languished. To understand the challenges being faced by the automotive assemblers, as well as parts and components manufacturers, the innovation capability and activities of selected establishments are analyzed following the framework developed by Bessant. This paper find...

  16. Optimization and optimal control in automotive systems

    CERN Document Server

    Kolmanovsky, Ilya; Steinbuch, Maarten; Re, Luigi

    2014-01-01

    This book demonstrates the use of the optimization techniques that are becoming essential to meet the increasing stringency and variety of requirements for automotive systems. It shows the reader how to move away from earlier  approaches, based on some degree of heuristics, to the use of  more and more common systematic methods. Even systematic methods can be developed and applied in a large number of forms so the text collects contributions from across the theory, methods and real-world automotive applications of optimization. Greater fuel economy, significant reductions in permissible emissions, new drivability requirements and the generally increasing complexity of automotive systems are among the criteria that the contributing authors set themselves to meet. In many cases multiple and often conflicting requirements give rise to multi-objective constrained optimization problems which are also considered. Some of these problems fall into the domain of the traditional multi-disciplinary optimization applie...

  17. Simulation of the noise transmission through automotive door seals

    CERN Document Server

    Hazir, Andreas

    2016-01-01

    Andreas Hazir is investigating the door seal contribution to the interior noise level of production vehicles. These investigations contain experimental contribution analyses of real production vehicles and of academic test cases as well as the development of a simulation methodology for noise transmission through sealing systems and side windows. The simulations are realized by coupling transient computational aeroacoustics of the exterior flow to nonlinear finite element simulations of the structural transmission. By introducing a linear transmission model, the setup and computational costs of the seal noise transmission are significantly reduced, resulting in the feasibility of numerical contribution analyses of real production vehicles. Contents Contribution Analyses of Production Vehicles Acoustic Excitation versus Aeroacoustic Excitation Development of a Simulation Methodology Sensitivity Analysis of Noise Transmission Simulations Target Groups Researchers and students in the field of automotive engineer...

  18. 16 CFR 306.5 - Automotive fuel rating.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Automotive fuel rating. 306.5 Section 306.5 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS AUTOMOTIVE FUEL RATINGS, CERTIFICATION AND POSTING Duties of Refiners, Importers and Producers § 306.5 Automotive...

  19. Best Practices in School-to-Careers: The Automotive Industry.

    Science.gov (United States)

    National Employer Leadership Council, Washington, DC.

    This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the automotive industry. First, the current state of the automotive industry is reviewed and the role of STC in addressing automotive service needs is explained. Next, the…

  20. Can Distance Learning Be Used to Teach Automotive Management Skills?

    Science.gov (United States)

    Noto, Teresa L.

    2011-01-01

    Today's automotive college students will shape the future of the automobile industry. The success of college-level automotive programs has long been dependent on the students' ability to participate in hands-on classroom based interactions. In this article, distance learning and how it can be used to teach automotive management skills, as well as…

  1. 25 CFR 117.10 - Purchase of automotive equipment.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Purchase of automotive equipment. 117.10 Section 117.10... COMPETENCY § 117.10 Purchase of automotive equipment. The superintendent may disburse from the surplus funds of an adult Indian not to exceed $2,000 for the purchase of automotive equipment when the...

  2. Fatigue life of automotive rubber jounce bumper

    International Nuclear Information System (INIS)

    It is evident that most rubber components in the automotive industry are subjected to repetitive loading. Vigorous research is needed towards improving the safety and reliability of the components. The study was done on an automotive rubber jounce bumper with a rubber hardness of 60 IRHD. The test was conducted in displacement-controlled environment under compressive load. The existing models by Kim, Harbour, Woo and Li were adopted to predict the fatigue life. The experimental results show strong similarities with the predicted models.

  3. Fatigue life of automotive rubber jounce bumper

    Energy Technology Data Exchange (ETDEWEB)

    Sidhu, R S [Automotive Engineering Unit, Institute of Advanced Technology, University Putra Malaysia, 43400, UPM Serdang, Selangor (Malaysia); Ali, Aidy, E-mail: aidy@eng.upm.edu.my [Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM, Serdang Selangor (Malaysia)

    2010-05-15

    It is evident that most rubber components in the automotive industry are subjected to repetitive loading. Vigorous research is needed towards improving the safety and reliability of the components. The study was done on an automotive rubber jounce bumper with a rubber hardness of 60 IRHD. The test was conducted in displacement-controlled environment under compressive load. The existing models by Kim, Harbour, Woo and Li were adopted to predict the fatigue life. The experimental results show strong similarities with the predicted models.

  4. Quartz angular rate sensor for automotive navigation

    Energy Technology Data Exchange (ETDEWEB)

    Nozoe, Toshiyuki; Ichinose, Toshihiko; Kawasaki, Syusaku; Hatanaka, Masakazu; Kuroda, Keisuke [Matsushita Electronic Components Co. Ltd. (Japan); Yamamoto, Kohji; Ogata, Motoki; Takeno, Shoichi [Fukui Matsushita Electric Co. Ltd. (Japan); Ishihara, Minoru; Ishii, Tadashi; Umeki, Mitoshi [Nihonn Denpa Kogyo Co. Ltd. (Japan)

    1999-07-01

    Many of the recent automotive navigation systems are introducing an angular rate sensor that detect vehicle yaw in their system due to the advantage of higher accuracy, in addition to a conventional GPS (Global Positioning System) and vehicle speed signals. Though there are a couple of other methods to get a vehicle direction information, the angular rate sensor is the most suitable device as a gyro in accuracy and reliability point of view. Matsushita developed a new compact angular rate sensor using quartz crystal for automotive navigation systems. The sensor's operation is based upon Coriolis force imposed on a vibrating quartz tuning fork. (orig.)

  5. Automotive cooling systems based on metal hydrides

    OpenAIRE

    Linder, Marc

    2010-01-01

    The present work focuses on metal hydride sorption systems as an alternative technology for automotive air-conditioning systems. Although this technology offers the possibility to increase the energy efficiency of a car (by utilising waste heat) and consequently reduces the CO2 emissions, its weight specific cooling power has so far been the main obstacle for an automotive application. Based on investigations of various metal hydrides, two alloys (LmNi4.91Sn0.15 and Ti0.99Zr0.01V0.43Fe0.09Cr0...

  6. Innovation and Entrepreneurship in the Automotive Business

    DEFF Research Database (Denmark)

    2011-01-01

    The global automotive business is one of the most competitive environment you can imagine. As an independent inventor or as a small development company it is very challenging to be successful in implementing new ideas and components. In this mature and somewhat conservative technical environment...... address you will have a much better access the decision making process and get enough interest for a potential business deal. After 20 years as a supplier of engineering services to the automotive industry and 10 years as head of Global R&D at Scania CV AB, I have experienced pros and cons both from a...

  7. Nanotechnology impact on the automotive industry.

    Science.gov (United States)

    Wong, Kaufui V; Paddon, Patrick A

    2014-01-01

    Nanotechnology has been implemented widely in the automotive industry. This technology is particularly useful in coatings, fabrics, structural materials, fluids, lubricants, tires, and preliminary applications in smart glass/windows and video display systems. A special sub-class of improved materials, alternative energy, has also seen a boost from advances in nanotechnology, and continues to be an active research area. A correlation exists in the automotive industry between the areas with increased nanotechnology incorporation and those with increased profit margins via improvements and customer demands. PMID:25360613

  8. 19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S... CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Automotive Products § 10.84...

  9. Parametric assessment of climate change impacts of automotive material substitution.

    Science.gov (United States)

    Geyer, Roland

    2008-09-15

    Quantifying the net climate change impact of automotive material substitution is not a trivial task. It requires the assessment of the mass reduction potential of automotive materials, the greenhouse gas (GHG) emissions from their production and recycling, and their impact on GHG emissions from vehicle use. The model presented in this paper is based on life cycle assessment (LCA) and completely parameterized, i.e., its computational structure is separated from the required input data, which is not traditionally done in LCAs. The parameterization increases scientific rigor and transparency of the assessment methodology, facilitates sensitivity and uncertainty analysis of the results, and also makes it possible to compare different studies and explain their disparities. The state of the art of the modeling methodology is reviewed and advanced. Assessment of the GHG emission impacts of material recycling through consequential system expansion shows that our understanding of this issue is still incomplete. This is a critical knowledge gap since a case study shows thatfor materials such as aluminum, the GHG emission impacts of material production and recycling are both of the same size as the use phase savings from vehicle mass reduction. PMID:18853818

  10. Design method for automotive high-beam LED optics

    Science.gov (United States)

    Byzov, Egor V.; Moiseev, Mikhail A.; Doskolovich, Leonid L.; Kazanskiy, Nikolay L.

    2015-09-01

    New analytical method for the calculation of the LED secondary optics for automotive high-beam lamps is presented. Automotive headlamps should illuminate the road and the curb at the distance of 100-150 meters and create a bright, flat, relatively powerful light beam. To generate intensity distribution of this kind we propose to use TIR optical element (collimator working on the total internal reflection principle) with array of microlenses (optical corrector) on the upper surface. TIR part of the optical element enables reflection of the side rays to the front direction and provides a collimated beam which incidents on the microrelief. Microrelief, in its turn, dissipates the light flux in horizontal direction to meet the requirements of the Regulations 112, 113 and to provide well-illuminated area across the road in the far field. As an example, we computed and simulated the optical element with the diameter of 33 millimeters and the height of 22 millimeters. Simulation data shows that three illuminating modules including Cree XP-G2 LED and lens allow generating an appropriate intensity distribution for the class D of UNECE Regulations.

  11. Research progress of aluminum alloy automotive sheet and application technology

    Institute of Scientific and Technical Information of China (English)

    Ma Mingtu; You Jianghai; Lu Hongzhou; Wang Zhiwen

    2012-01-01

    Pretrcatment technology is deeply discussed to explain its importance in guaranteeing properties and form- ability of aluminum alloy automotive sheet. Some typical applications of aluminum alloy automotive sheet to automotive industry are listed. Based on the author's knowledge and recognition and research progress presently, the important re- search contents about aluminum alloy automotive sheet are emphasized. Reducing cost and price of sheet and going deeply into application research are the main work for expending the application of aluminum alloy automotive sheet in the automobile.

  12. Degradation of automotive materials in palm biodiesel

    International Nuclear Information System (INIS)

    As compared to petroleum diesel, biodiesel is more corrosive for automotive materials. Studies on the characterization of corrosion products of fuel exposed automotive materials are scarce. Automotive fuel system and engine components are made from different ferrous and non-ferrous materials. The present study aims to investigate the corrosion products of different types of automotive materials such as copper, brass, aluminum and cast iron upon exposure to diesel and palm biodiesel. Changes in fuel properties due to exposure of different materials were also examined. Degradation of metal surface was characterized by digital camera, SEM/EDS and X-ray diffraction (XRD). Fuel properties were examined by measuring TAN (total acid number), density and viscosity. Among the metal investigated, copper is found to be least resistant in biodiesel and formed comparatively more corrosion products than other metals. Upon exposure of metals in biodiesel, TAN number crosses the limit given by standard while density and viscosity remain within the acceptable range of limit. -- Highlights: ► Order of incompatible metals in palm biodiesel: copper > brass > aluminum > cast iron. ► The possible reactions for the degradation of copper and cast iron have been discussed. ► For metal exposed biodiesel, only TAN number crosses the limit while density and viscosity remain within the limit. ► Copper and copper based alloy (brass) increase TAN number comparatively more than other metals.

  13. Automotive Stirling engine development program: A success

    Science.gov (United States)

    Tabata, W. K.

    1987-01-01

    The original 5-yr Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

  14. Plastic optical fibers for automotive applications

    Science.gov (United States)

    Suganuma, Heiroku; Matsunaga, Tadayo

    1991-12-01

    High heat resistant optical fibers (POFs) have been developed for various automotive applications. Plastic chips with POF light guide have been used in place of a clearance monitor lamp. POF cords and cables have been used in the car-audio system, car-navigation system, and other data communication systems. This paper describes the structures, properties, and reliabilities of POFs for these applications.

  15. 78 FR 36633 - National Automotive Sampling System

    Science.gov (United States)

    2013-06-18

    ... complete Privacy Act statement in the Federal Register published on April 11, 2000 (65 FR 19477-78) or you... 21, 2012, NHTSA published a Federal Register notice (77 FR 37471-72) soliciting comments from NASS... National Highway Traffic Safety Administration National Automotive Sampling System AGENCY: National...

  16. Automotive gear oil lubricant from soybean oil

    Science.gov (United States)

    The use of lubricants that are based on renewable materials is rapidly increasing. Vegetable oils have good lubricity, wear protection and low volatility which are desired properties for automotive gear lubricant applications. Soybean oil is used widely in the lubricant industry due to its properti...

  17. A listening test system for automotive audio

    DEFF Research Database (Denmark)

    Christensen, Flemming; Geoff, Martin; Minnaar, Pauli;

    2005-01-01

    This paper describes a system for simulating automotive audio through headphones for the purposes of conducting listening experiments in the laboratory. The system is based on binaural technology and consists of a component for reproducing the sound of the audio system itself and a component for...

  18. Metrics for Automotive Merchandising, Petroleum Marketing.

    Science.gov (United States)

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of students in automotive merchandising and petroleum marketing classes, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know…

  19. Automotive Stirling engine development program

    Science.gov (United States)

    Ernst, W.; Piller, S.; Richey, A.; Simetkosky, M.; Antonelli, M. (Editor)

    1982-01-01

    Activities performed on Mod I engine testing and test results, progress in manufacturing, assembling and testing of a Mod I engine in the United States, P40 Stirling engine dynamometer and multifuels testing, analog/digital controls system testing, Stirling reference engine manufacturing and reduced size studies, components and subsystems, and computer code development are summarized.

  20. COMPUTING

    CERN Multimedia

    M. Kasemann

    Overview In autumn the main focus was to process and handle CRAFT data and to perform the Summer08 MC production. The operational aspects were well covered by regular Computing Shifts, experts on duty and Computing Run Coordination. At the Computing Resource Board (CRB) in October a model to account for service work at Tier 2s was approved. The computing resources for 2009 were reviewed for presentation at the C-RRB. The quarterly resource monitoring is continuing. Facilities/Infrastructure operations Operations during CRAFT data taking ran fine. This proved to be a very valuable experience for T0 workflows and operations. The transfers of custodial data to most T1s went smoothly. A first round of reprocessing started at the Tier-1 centers end of November; it will take about two weeks. The Computing Shifts procedure was tested full scale during this period and proved to be very efficient: 30 Computing Shifts Persons (CSP) and 10 Computing Resources Coordinators (CRC). The shift program for the shut down w...

  1. COMPUTING

    CERN Multimedia

    P. McBride

    The Computing Project is preparing for a busy year where the primary emphasis of the project moves towards steady operations. Following the very successful completion of Computing Software and Analysis challenge, CSA06, last fall, we have reorganized and established four groups in computing area: Commissioning, User Support, Facility/Infrastructure Operations and Data Operations. These groups work closely together with groups from the Offline Project in planning for data processing and operations. Monte Carlo production has continued since CSA06, with about 30M events produced each month to be used for HLT studies and physics validation. Monte Carlo production will continue throughout the year in the preparation of large samples for physics and detector studies ramping to 50 M events/month for CSA07. Commissioning of the full CMS computing system is a major goal for 2007. Site monitoring is an important commissioning component and work is ongoing to devise CMS specific tests to be included in Service Availa...

  2. COMPUTING

    CERN Multimedia

    I. Fisk

    2011-01-01

    Introduction CMS distributed computing system performed well during the 2011 start-up. The events in 2011 have more pile-up and are more complex than last year; this results in longer reconstruction times and harder events to simulate. Significant increases in computing capacity were delivered in April for all computing tiers, and the utilisation and load is close to the planning predictions. All computing centre tiers performed their expected functionalities. Heavy-Ion Programme The CMS Heavy-Ion Programme had a very strong showing at the Quark Matter conference. A large number of analyses were shown. The dedicated heavy-ion reconstruction facility at the Vanderbilt Tier-2 is still involved in some commissioning activities, but is available for processing and analysis. Facilities and Infrastructure Operations Facility and Infrastructure operations have been active with operations and several important deployment tasks. Facilities participated in the testing and deployment of WMAgent and WorkQueue+Request...

  3. COMPUTING

    CERN Multimedia

    M. Kasemann

    Overview During the past three months activities were focused on data operations, testing and re-enforcing shift and operational procedures for data production and transfer, MC production and on user support. Planning of the computing resources in view of the new LHC calendar in ongoing. Two new task forces were created for supporting the integration work: Site Commissioning, which develops tools helping distributed sites to monitor job and data workflows, and Analysis Support, collecting the user experience and feedback during analysis activities and developing tools to increase efficiency. The development plan for DMWM for 2009/2011 was developed at the beginning of the year, based on the requirements from the Physics, Computing and Offline groups (see Offline section). The Computing management meeting at FermiLab on February 19th and 20th was an excellent opportunity discussing the impact and for addressing issues and solutions to the main challenges facing CMS computing. The lack of manpower is particul...

  4. Dynamic Stability Evaluation of an Automotive Turbocharger Rotor-Bearing System

    OpenAIRE

    Alsaeed, Ali A.

    2005-01-01

    This project was initiated to more fully understand the dynamic stability of an automotive turbocharger rotor-bearing system using both linear and nonlinear analyses. The capabilities of a commercial Finite Element Analysis (FEA) code (computer program) were implemented in the investigation process. Several different hydrodynamic journal bearings were employed in the study of the turbocharger linearized dynamic stability. The research demonstrates how the linear analysis of a t...

  5. Build to Order Supply Chain in Automotive Industry : A case study of Volvo

    OpenAIRE

    Nadeem, Muhammad; Ul Haq, Faheem

    2010-01-01

    The build-to-order supply chain strategy is Relatively new, and hock got attention of Researchers and Industry, with Successful Implementation in Many Industries and companies, like Dell Computers, Compaq, and BMW. Automotive Industry Is One Of The Industries Where build-to-order hock Shown good results. Automobile Manufacturers always Wants to build cars online orders Since the birth of mass production, and build-to-order strategy Let Them do that. Information Technology Is the Enabler That ...

  6. Automotion of domain walls for spintronic interconnects

    Science.gov (United States)

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A.

    2014-06-01

    We simulate "automotion," the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20 nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  7. Automotion of domain walls for spintronic interconnects

    International Nuclear Information System (INIS)

    We simulate “automotion,” the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20 nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  8. Lightweight Steel Solutions for Automotive Industry

    Science.gov (United States)

    Lee, Hong Woo; Kim, Gyosung; Park, Sung Ho

    2010-06-01

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  9. Platform Based Design for Automotive Sensor Conditioning

    CERN Document Server

    Fanucci, L; Iozzi, F; Marino, C; Rocchi, A

    2011-01-01

    In this paper a general architecture suitable to interface several kinds of sensors for automotive applications is presented. A platform based design approach is pursued to improve system performance while minimizing time-to-market.. The platform is composed by an analog front-end and a digital section. The latter is based on a microcontroller core (8051 IP by Oregano) plus a set of dedicated hardware dedicated to the complex signal processing required for sensor conditioning. The microcontroller handles also the communication with external devices (as a PC) for data output and fast prototyping. A case study is presented concerning the conditioning of a Gyro yaw rate sensor for automotive applications. Measured performance results outperform current state-of-the-art commercial devices.

  10. Automotion of domain walls for spintronic interconnects

    Energy Technology Data Exchange (ETDEWEB)

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A. [Exploratory Integrated Circuits, Components Research, Intel Corp., Hillsboro, Oregon 97124 (United States)

    2014-06-07

    We simulate “automotion,” the transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate without longitudinal charge current transfer, with only a transient current pulse at domain wall creation and have favorable scaling down to the 20 nm dimension. Cases of both in-plane and out-of-plane magnetization are considered. Analytical dependence of the velocity of domain walls on the angle of magnetization are compared with full micromagnetic simulations. Deceleration, attenuation and disappearance, and reflection of domain walls are demonstrated through simulation. Dependences of the magnetization angle on the current pulse parameters are studied. The energy and delay analysis suggests that automotion is an attractive option for spintronic logic interconnects.

  11. Automotive Stirling engine: Mod 2 design report

    Science.gov (United States)

    Nightingale, Noel P.

    1986-01-01

    The design of an automotive Stirling engine that achieves the superior fuel economy potential of the Stirling cycle is described. As the culmination of a 9-yr development program, this engine, designated the Mod 2, also nullifies arguments that Stirling engines are heavy, expensive, unreliable, demonstrating poor performance. Installed in a General Motors Chevrolet Celebrity car, this engine has a predicted combined fuel economy on unleaded gasoline of 17.5 km/l (41 mpg)- a value 50% above the current vehicle fleet average. The Mod 2 Stirling engine is a four-cylinder V-drive design with a single crankshaft. The engine is also equipped with all the controls and auxiliaries necessary for automotive operation.

  12. Automotive Stirling engine: Mod II design report

    Energy Technology Data Exchange (ETDEWEB)

    Nightingale, N.P.

    1986-10-01

    The design of an automotive Stirling engine that achieves the superior fuel economy potential of the Stirling cycle is described. As the culmination of a 9-yr development program, this engine, designated the Mod II, also nullifies arguments that Stirling engines are heavy, expensive, unreliable, and demonstrate poor performance. Installed in a General Motors 1985 Chevrolet Celebrity car, this engine has a predicted combined fuel economy on unleaded gasoline of 17.5 km/L (41 mi/gal) - a value 50% above the current vehicle fleet average. The Mod II Stirling engine is a four-cylinder V-drive design with a single crankshaft. The engine is also equipped with all the controls and auxiliaries necessary for automotive operation. 35 figs.

  13. Tribocharging behaviour of automotive powder coatings

    Science.gov (United States)

    Thomas, Aline; Saleh, Khashayar; Guigon, Pierre; Czechowski, Claire

    2008-12-01

    The aim of this work was to build a device allowing the measurement of tribocharging during the fluidization and pneumatic transport of automotive powder coatings. The experimental setup included a fluidization unit, a transport pipe and two 'Faraday cups' allowing continuous monitoring of particle charge. Two batches of industrial automotive powder primers, as well as several other types of powders were tested: alumina, silica... The experimental variables were the length of the conveying pipe and the air flow rate. The results showed that the net amount of acquired tribocharge increases with the length of conveying pipe. The experimental device and procedure allowed to well classify tested powders according to their rate of tribocharging and their maximum charge. More specially, this study pointed out a net difference between electrostatic properties of two powder primers, which behave very differently in the industrial application unit.

  14. Ultrahigh carbon steel for automotive applications

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.; Syn, C.K. [Lawrence Livermore National Lab., CA (United States); Sherby, O.D. [Stanford Univ., CA (United States)

    1995-12-04

    Ultrahigh carbon steels (UHCSs), which contain 1--2.1% carbon, have remarkable structural properties for automotive application when processed to achieve fine ferrite grains with fine spheroidized carbides. When processed for high room temperature ductility, UHCS can have good tensile ductility but significantly higher strength than current automotive high strength steels. The material can also be made superplastic at intermediate temperatures and exhibits excellent die fill capability. Furthermore, they can be made hard with high compression ductility. In wire form it is projected that UHCS can exhibit extremely high strengths (5,000 MPa) for tire cord applications. Examples of structural components that have been formed from fine-grained spheroidized UHCSs are illustrated.

  15. Lightweight Steel Solutions for Automotive Industry

    International Nuclear Information System (INIS)

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  16. COMPUTING

    CERN Multimedia

    I. Fisk

    2013-01-01

    Computing activity had ramped down after the completion of the reprocessing of the 2012 data and parked data, but is increasing with new simulation samples for analysis and upgrade studies. Much of the Computing effort is currently involved in activities to improve the computing system in preparation for 2015. Operations Office Since the beginning of 2013, the Computing Operations team successfully re-processed the 2012 data in record time, not only by using opportunistic resources like the San Diego Supercomputer Center which was accessible, to re-process the primary datasets HTMHT and MultiJet in Run2012D much earlier than planned. The Heavy-Ion data-taking period was successfully concluded in February collecting almost 500 T. Figure 3: Number of events per month (data) In LS1, our emphasis is to increase efficiency and flexibility of the infrastructure and operation. Computing Operations is working on separating disk and tape at the Tier-1 sites and the full implementation of the xrootd federation ...

  17. Fmcw Mmw Radar For Automotive Longitudinal Control

    OpenAIRE

    David, William

    1997-01-01

    This report presents information on millimeter wave (MMW) radar for automotive longitudinal control. It addresses the fundamental capabilities and limitations of millimeter waves for ranging and contrasts their operation with that of conventional microwave radar. The report analyzes pulsed and FMCW radar configurations, and provides detailed treatment of FMCW radar operating at MMW frequency, its advantages and disadvantages as they relate to range and velocity measurements.

  18. INNOVATION LEAN PRINCIPLES IN AUTOMOTIVE GREEN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Dušan Sabadka

    2014-12-01

    Full Text Available Today, industries such as automotive and manufacturing industries deal with a lot of environmental regulations. Lean is a production strategy whose fundamental principles drive the industry towards a more effective production of goods and services. The eco-efficiency concept is primary to sustainable development and intends to provide more value with less environmental impact. The aim of this study is to identify and explore the contributions of Lean to reduce environmental impacts that naturally result from industrial activity.

  19. TECHNOLOGICAL MEASURES TO IMPROVE AUTOMOTIVE PRODUCT QUALITY

    OpenAIRE

    Gladkov, V.; Kruglov, S.

    2010-01-01

    The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

  20. Visual configuration in automotive software product lines

    OpenAIRE

    Botterweck, Goetz; Thiel, Steffen; Crawley, Ciar??n; Nestor, Daren; PreuBner, Andr??

    2008-01-01

    peer-reviewed Software Product Line engineering has emerged as a viable and important software development paradigm in the automotive industry. It allows companies to realise significant improvements in time-to-market, cost, productivity, and system quality. One major difficulty with software product line engineering is related to the fact that a product line of industrial size can easily incorporate thousands of variation points. This scale of variability can become extremely com...

  1. Assembly-oriented design in automotive engineering

    OpenAIRE

    Vielhaber, Michael; Burr, Holger; Deubel, Till; Weber, Christian; Haasis, Siegmar

    2004-01-01

    To be competitive on the global market, carmakers have cut lead times in passenger car development to the bone. At the same time both the product complexity and the customer's demands with regard to quality are continuously rising. Various new strategies and tools are currently being explored to cope with these challenges: simultaneous/concurrent engineering, front-loaded development, and knowledge-/feature-based parametric design to name just a few. Current design processes in automotive eng...

  2. Automotion of Domain Walls for Spintronic Interconnects

    OpenAIRE

    Nikonov, Dmitri E.; Manipatruni, Sasikanth; Young, Ian A.

    2013-01-01

    We simulate automotion, the spontaneous transport of a magnetic domain wall under the influence of demagnetization and magnetic anisotropy, in nanoscale spintronic interconnects. In contrast to spin transfer driven magnetic domain wall motion, the proposed interconnects operate with only a transient current pulse and provide favorable scaling down to the 20nm scale. Cases of both in-plane and perpendicular magnetization are considered. Analytical dependence of the velocity of domain walls on ...

  3. General Motors automotive fuel cell program

    Energy Technology Data Exchange (ETDEWEB)

    Fronk, M.H.

    1995-08-01

    The objectives of the second phase of the GM/DOE fuel cell program is to develop and test a 30 kW fuel cell powerplant. This powerplant will be based on a methanol fuel processor and a proton exchange membrane PM fuel cell stack. In addition, the 10 kW system developed during phase I will be used as a {open_quotes}mule{close_quotes} to test automotive components and other ancillaries, needed for transient operation.

  4. Brazilian automotive industry in the nineties

    OpenAIRE

    Cecchini, Kerlyng; Guilhoto, Joaquim José Martins; GEOFFREY J.D. HEWINGS; Chokri, Dridi

    2007-01-01

    This paper aims to carry out an analysis of fuzzy clusters in the Brazilian automotive industry to contribute to the analysis of the relative importance of these economic activities in the national productive structure and in their regional contexts. The intention is to assess whether, once they have been established in the structure of a determined region, the economic activities of the industry establish productive relationships similar to other industries to the point of leading an indust...

  5. Analysis of the automotive supplier industry

    OpenAIRE

    Fejtková Drgová, Michaela

    2014-01-01

    The subject of this thesis is "Analysis of suppliers in automotive industry“. The processes of purchasing department are analyzed from the supplier´s selection to his evaluation. The work is divided into the theoretical and the practical parts. The practical part is to define the basic concepts linked with the purchasing area. The part goals are executed in the practical part and the purchasing procedures of Keihin Company are deeply described. Outcome of this thesis is a proposal to effectiv...

  6. Green competitiveness research on Chinese automotive enterprises

    OpenAIRE

    Yuanhui Li

    2014-01-01

    Purpose: More and more executives of automobileindustry in China start to recognize the concept of green competitiveness recently. However, relatively less research attention has been devoted to the consideration of measurement. This paper aims to find empirical approach to quantify green competitiveness for automotive enterprises. The connotation of green competitiveness is explored and one suite of evaluation index system has been proposed with four dimensions including environmental, resou...

  7. Design Patterns of Timed Automotive Systems

    OpenAIRE

    Aghav, Jagannath; Petitpierre, Claude

    2003-01-01

    The functional complexity of hardware and software systems is growing exponentially. This demands an integration of system validation in the design phase to guarantee that a concrete implementation conforms to the modeled requirements. System validation process involves use of advanced systematic techniques and tools. In this report we present design patterns of timed automotive systems and a method for validating the real-time behavioral patterns of control intensive applications. The ...

  8. Electrohydraulic Forming of Light Weight Automotive Panels

    OpenAIRE

    Mamutov, A. V.; Golovashchenko, S. F.; Bonnen, J. J.; Gillard, A. J.; Dawson, S. A.; Maison, L.

    2016-01-01

    This paper describes the results of development of the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology. EHF is an electro-dynamic process based upon high-voltage discharge of capacitors between two electrodes positioned in a fluid-filled chamber. This process is extremely fast, uses lowercost single-sided tooling, and potentially derives significantly increased formability from many sheet metal materials due to the elevated s...

  9. Computer

    CERN Document Server

    Atkinson, Paul

    2011-01-01

    The pixelated rectangle we spend most of our day staring at in silence is not the television as many long feared, but the computer-the ubiquitous portal of work and personal lives. At this point, the computer is almost so common we don't notice it in our view. It's difficult to envision that not that long ago it was a gigantic, room-sized structure only to be accessed by a few inspiring as much awe and respect as fear and mystery. Now that the machine has decreased in size and increased in popular use, the computer has become a prosaic appliance, little-more noted than a toaster. These dramati

  10. Characterization of three-way automotive catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kenik, E.A.; More, K.L. [Oak Ridge National Lab., TN (United States); LaBarge, W. [Delphi Automotive Systems, Flint, MI (United States)] [and others

    1997-04-01

    The CRADA between Delphi Automotive Systems (Delphi; formerly General Motors - AC Delco, Systems) and Lockheed Martin Energy Research (LMER) on automotive catalysts was completed at the end of FY96, after a ten month, no-cost extension. The CRADA was aimed at improved performance and lifetime of noble metal based three-way-catalysts (TWC), which are the primary catalytic system for automotive emission control systems. While these TWC can meet the currently required emission standards, higher than optimum noble metal loadings are often required to meet lifetime requirements. In addition, more stringent emission standards will be imposed in the near future, demanding improved performance and service life from these catalysts. Understanding the changes of TWC conversion efficiency with ageing is a critical need in improving these catalysts. Initially in a fresh catalyst, the active material is often distributed on a very fine scale, approaching single atoms or small atomic clusters. As such, a wide range of analytical techniques have been employed to provide high spatial resolution characterization of the evolving state of the catalytic material.

  11. Bosch automotive electrics and automotive electronics. Systems and components, networking and hybrid drive. 5. ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    Complete reference guide to automotive electrics and electronics. The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the ''Automotive Electric, Automotive Electronics'' technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle.

  12. Fringe analysis for automotive applications

    Science.gov (United States)

    Brown, Gordon M.

    The capabilities of Ford USA's Computer Aided Holometry (CAH) system for stepped phase interferometry are presented. Holographic test equipment and facilities are briefly reviewed. Fringe analysis algorithms and procedures for practical semi-automated processing of stepped phase interferograms of complex real life structures for quantitative measurement of deformation and shape are discussed. Several automative applications illustrating the fringe analysis technique are presented, including: (1) the use of CAH combined with Finite Element Analysis (FEA) methods to study frictional effects of the thermal insertion of a wrist pin into a connecting rod; (2) a study of engine deformation due to hydraulic loading of the cylinders; and (3) the computation of sound pressure from CAH measured vibration amplitude/phase and shape using the Rayleigh integral and SYSNOISE TM methods. In the past, holometry methods have been used primarily for problem solving in structures that were already in production, often where limited opportunities existed to make expensive modifications to existing tooling. Infrequently holometry was used by knowledgeable engineers to develop optimized components in the prototype stage even without the current CAE methods. The opportunity and challenge of our day is to closely couple CAE (FEM, EFA) methods and experimental methods (CAH, modal, etc.) to optimize structural performance in the upstream product development process where necessary tooling modifications can and will be made.

  13. POTENTIAL USE OF MAGNESIUM ALLOYS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kudret KANDEMİR

    2003-01-01

    Full Text Available Recently, there is a high interest in using lightweight materials for automotive applications where weight reduction and improvement in comfort are needed. Magnesium alloys with excellent specific strength and stiffness properties can be comparable with steel and aluminum alloys for applications in the automotive industry. For this reason, the properties of magnesium alloys are in the focus of research. This study aims at reviewing and evaluating the prospects of magnesium alloys use and applications in the automotive industry.

  14. The determinants of location choices of automotive producers in Turkey

    OpenAIRE

    Erdogan, Ersin

    2011-01-01

    Turkish automotive industry achieved a remarkable growth in the last two decades. This growth has been led by three closely located northwest cities of the country; namely Bursa, Kocaeli and Sakarya. The first purpose of this study is signposting the geographical concentration of automotive industry in Turkey. The second goal of the study is to find out the determinants of the location-choices of automotive producers in Turkey by using export of motor vehicles and related industry products fi...

  15. AUTOMOTIVE MARKET- FROM A GENERAL TO A MARKET SEGMENTATION APPROACH

    OpenAIRE

    Liviana Andreea Niminet

    2014-01-01

    Automotive market and its corresponding industry are undoubtedly of outmost importance and therefore proper market segmentation is crucial for market players, potential competitors and customers as well. Time has proved that market economic analysis often shown flaws in determining the relevant market, by using solely or mainly the geographic aspect and disregarding the importance of segments on the automotive market. For these reasons we propose a new approach of the automotive market provin...

  16. The role of software engineering in future automotive systems development

    OpenAIRE

    Clarke, Siobhán; Fitzgerald, Brian; Nixon, Paddy; Pohl, Klaus; Ryan, Kevin; Sinclair, David; Thiel, Steffen

    2008-01-01

    peer-reviewed The amount and complexity of software in automotive systems is constantly increasing. Today’s luxury cars include numerous electronic control units. A large part of the functionality of these units is driven by software. In the future even more software-intensive automotive systems are expected as automotive manufacturers and suppliers tend to integrate and combine applications on more powerful platforms. The increasing amount and complexity of software in these plat...

  17. Integrated Vehicle Health Management in the Automotive Industry

    OpenAIRE

    Holland, Steven

    2010-01-01

    The time has come to port integrated vehicle health management concepts originally pioneered in aerospace and other domains into the automotive industry. ï‚· The successful automotive manufacturer must remain highly customer-focused to ensure delivery of high value at an affordable price. ï‚· IVHM success will require partnering between the automotive manufacturer, its suppliers, as well as external technology providers located in private industry, academia and governmental labs ...on a globa...

  18. COMPUTING

    CERN Multimedia

    I. Fisk

    2010-01-01

    Introduction It has been a very active quarter in Computing with interesting progress in all areas. The activity level at the computing facilities, driven by both organised processing from data operations and user analysis, has been steadily increasing. The large-scale production of simulated events that has been progressing throughout the fall is wrapping-up and reprocessing with pile-up will continue. A large reprocessing of all the proton-proton data has just been released and another will follow shortly. The number of analysis jobs by users each day, that was already hitting the computing model expectations at the time of ICHEP, is now 33% higher. We are expecting a busy holiday break to ensure samples are ready in time for the winter conferences. Heavy Ion An activity that is still in progress is computing for the heavy-ion program. The heavy-ion events are collected without zero suppression, so the event size is much large at roughly 11 MB per event of RAW. The central collisions are more complex and...

  19. COMPUTING

    CERN Multimedia

    M. Kasemann P. McBride Edited by M-C. Sawley with contributions from: P. Kreuzer D. Bonacorsi S. Belforte F. Wuerthwein L. Bauerdick K. Lassila-Perini M-C. Sawley

    Introduction More than seventy CMS collaborators attended the Computing and Offline Workshop in San Diego, California, April 20-24th to discuss the state of readiness of software and computing for collisions. Focus and priority were given to preparations for data taking and providing room for ample dialog between groups involved in Commissioning, Data Operations, Analysis and MC Production. Throughout the workshop, aspects of software, operating procedures and issues addressing all parts of the computing model were discussed. Plans for the CMS participation in STEP’09, the combined scale testing for all four experiments due in June 2009, were refined. The article in CMS Times by Frank Wuerthwein gave a good recap of the highly collaborative atmosphere of the workshop. Many thanks to UCSD and to the organizers for taking care of this workshop, which resulted in a long list of action items and was definitely a success. A considerable amount of effort and care is invested in the estimate of the comput...

  20. Impact of system parameter selection on radar sensor performance in automotive applications

    OpenAIRE

    Blöecher, H.-L.; Andres, M; Fischer, C.; Sailer, A.; Goppelt, M.; J. Dickmann

    2012-01-01

    The paper deals with the investigation of relevant boundary conditions to be considered in order to operate 77/79 GHz narrow and ultra wide band automotive radar sensors in the automotive platform and the automotive environment.

  1. 75 FR 11938 - Meridian Automotive Systems, Grand Rapids, MI; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Meridian Automotive Systems, Grand Rapids, MI; Notice of Termination... Meridian Automotive Systems, Grand Rapids, Michigan (Meridian Automotive). The petitioning group of...

  2. Final report: U.S. competitive position in automotive technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albert, Michael B.; Cheney, Margaret; Thomas, Patrick; Kroll, Peter

    2002-09-30

    Patent data are presented and analyzed to assess the U.S. competitive position in eleven advanced automotive technology categories, including automotive fuel cells, hydrogen storage, advanced batteries, hybrid electric vehicles and others. Inventive activity in most of the technologies is found to be growing at a rapid pace, particularly in advanced batteries, automotive fuel cells and ultracapacitors. The U.S. is the clear leader in automotive fuel cells, on-board hydrogen storage and light weight materials. Japan leads in advanced batteries, hybrid electric vehicles, ultracapacitors, and appears to be close to overtaking the U.S. in other areas of power electronics.

  3. Present Situation of Purification Technologies for Automotive Exhaust in China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    It is presented that eliminating and controlling the current automotive exhaust emission should be important and urgent in China, and the Chinese state emission standards have been getting stricter and stricter. Also the present purification technologies for automotive exhaust are elucidated. It is indicated that the development and the commercialization of Rare Earth based on three way catalytic converters is pretty necessary and urgent to address the current harsh automotive exhaust emission problems in China. In addition, the future automotive exhaust purification technologies are prospected.

  4. AUTOMOTIVE MARKET- FROM A GENERAL TO A MARKET SEGMENTATION APPROACH

    Directory of Open Access Journals (Sweden)

    Liviana Andreea Niminet

    2014-01-01

    Full Text Available Automotive market and its corresponding industry are undoubtedly of outmost importance and therefore proper market segmentation is crucial for market players, potential competitors and customers as well. Time has proved that market economic analysis often shown flaws in determining the relevant market, by using solely or mainly the geographic aspect and disregarding the importance of segments on the automotive market. For these reasons we propose a new approach of the automotive market proving the importance of proper market segmentation and defining the strategic groups within the automotive market.

  5. Offshoring trends in the manufacturing process within the automotive industry

    DEFF Research Database (Denmark)

    Simplay, S.; Hansen, Zaza Nadja Lee

    2014-01-01

    This paper investigates offshoring trends in the automotive industry. The research approach consisted of combining empirical findings from case companies with latest research from the field. Empirical data was collected through case studies from 15 automotive organisations based in Europe...... consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development...... with a focus on offshoring in the automotive industry and provides practitioners with information on a cutting-edge trend to the industry...

  6. COMPUTING

    CERN Multimedia

    I. Fisk

    2010-01-01

    Introduction The first data taking period of November produced a first scientific paper, and this is a very satisfactory step for Computing. It also gave the invaluable opportunity to learn and debrief from this first, intense period, and make the necessary adaptations. The alarm procedures between different groups (DAQ, Physics, T0 processing, Alignment/calibration, T1 and T2 communications) have been reinforced. A major effort has also been invested into remodeling and optimizing operator tasks in all activities in Computing, in parallel with the recruitment of new Cat A operators. The teams are being completed and by mid year the new tasks will have been assigned. CRB (Computing Resource Board) The Board met twice since last CMS week. In December it reviewed the experience of the November data-taking period and could measure the positive improvements made for the site readiness. It also reviewed the policy under which Tier-2 are associated with Physics Groups. Such associations are decided twice per ye...

  7. COMPUTING

    CERN Multimedia

    M. Kasemann

    CCRC’08 challenges and CSA08 During the February campaign of the Common Computing readiness challenges (CCRC’08), the CMS computing team had achieved very good results. The link between the detector site and the Tier0 was tested by gradually increasing the number of parallel transfer streams well beyond the target. Tests covered the global robustness at the Tier0, processing a massive number of very large files and with a high writing speed to tapes.  Other tests covered the links between the different Tiers of the distributed infrastructure and the pre-staging and reprocessing capacity of the Tier1’s: response time, data transfer rate and success rate for Tape to Buffer staging of files kept exclusively on Tape were measured. In all cases, coordination with the sites was efficient and no serious problem was found. These successful preparations prepared the ground for the second phase of the CCRC’08 campaign, in May. The Computing Software and Analysis challen...

  8. COMPUTING

    CERN Multimedia

    I. Fisk

    2011-01-01

    Introduction It has been a very active quarter in Computing with interesting progress in all areas. The activity level at the computing facilities, driven by both organised processing from data operations and user analysis, has been steadily increasing. The large-scale production of simulated events that has been progressing throughout the fall is wrapping-up and reprocessing with pile-up will continue. A large reprocessing of all the proton-proton data has just been released and another will follow shortly. The number of analysis jobs by users each day, that was already hitting the computing model expectations at the time of ICHEP, is now 33% higher. We are expecting a busy holiday break to ensure samples are ready in time for the winter conferences. Heavy Ion The Tier 0 infrastructure was able to repack and promptly reconstruct heavy-ion collision data. Two copies were made of the data at CERN using a large CASTOR disk pool, and the core physics sample was replicated ...

  9. COMPUTING

    CERN Multimedia

    M. Kasemann

    Introduction During the past six months, Computing participated in the STEP09 exercise, had a major involvement in the October exercise and has been working with CMS sites on improving open issues relevant for data taking. At the same time operations for MC production, real data reconstruction and re-reconstructions and data transfers at large scales were performed. STEP09 was successfully conducted in June as a joint exercise with ATLAS and the other experiments. It gave good indication about the readiness of the WLCG infrastructure with the two major LHC experiments stressing the reading, writing and processing of physics data. The October Exercise, in contrast, was conducted as an all-CMS exercise, where Physics, Computing and Offline worked on a common plan to exercise all steps to efficiently access and analyze data. As one of the major results, the CMS Tier-2s demonstrated to be fully capable for performing data analysis. In recent weeks, efforts were devoted to CMS Computing readiness. All th...

  10. COMPUTING

    CERN Multimedia

    I. Fisk

    2012-01-01

    Introduction Computing continued with a high level of activity over the winter in preparation for conferences and the start of the 2012 run. 2012 brings new challenges with a new energy, more complex events, and the need to make the best use of the available time before the Long Shutdown. We expect to be resource constrained on all tiers of the computing system in 2012 and are working to ensure the high-priority goals of CMS are not impacted. Heavy ions After a successful 2011 heavy-ion run, the programme is moving to analysis. During the run, the CAF resources were well used for prompt analysis. Since then in 2012 on average 200 job slots have been used continuously at Vanderbilt for analysis workflows. Operations Office As of 2012, the Computing Project emphasis has moved from commissioning to operation of the various systems. This is reflected in the new organisation structure where the Facilities and Data Operations tasks have been merged into a common Operations Office, which now covers everything ...

  11. COMPUTING

    CERN Multimedia

    P. McBride

    It has been a very active year for the computing project with strong contributions from members of the global community. The project has focused on site preparation and Monte Carlo production. The operations group has begun processing data from P5 as part of the global data commissioning. Improvements in transfer rates and site availability have been seen as computing sites across the globe prepare for large scale production and analysis as part of CSA07. Preparations for the upcoming Computing Software and Analysis Challenge CSA07 are progressing. Ian Fisk and Neil Geddes have been appointed as coordinators for the challenge. CSA07 will include production tests of the Tier-0 production system, reprocessing at the Tier-1 sites and Monte Carlo production at the Tier-2 sites. At the same time there will be a large analysis exercise at the Tier-2 centres. Pre-production simulation of the Monte Carlo events for the challenge is beginning. Scale tests of the Tier-0 will begin in mid-July and the challenge it...

  12. COMPUTING

    CERN Multimedia

    M. Kasemann

    Introduction More than seventy CMS collaborators attended the Computing and Offline Workshop in San Diego, California, April 20-24th to discuss the state of readiness of software and computing for collisions. Focus and priority were given to preparations for data taking and providing room for ample dialog between groups involved in Commissioning, Data Operations, Analysis and MC Production. Throughout the workshop, aspects of software, operating procedures and issues addressing all parts of the computing model were discussed. Plans for the CMS participation in STEP’09, the combined scale testing for all four experiments due in June 2009, were refined. The article in CMS Times by Frank Wuerthwein gave a good recap of the highly collaborative atmosphere of the workshop. Many thanks to UCSD and to the organizers for taking care of this workshop, which resulted in a long list of action items and was definitely a success. A considerable amount of effort and care is invested in the estimate of the co...

  13. 77 FR 19000 - Foreign-Trade Zone 99-Wilmington, DE: Application for Manufacturing Authority; Fisker Automotive...

    Science.gov (United States)

    2012-03-29

    ...; Fisker Automotive, Inc. (Electric Passenger Vehicles): Wilmington, DE An application has been submitted... FTZ 99, requesting manufacturing authority on behalf of Fisker Automotive, Inc. (Fisker),...

  14. Rotordynamics of Automotive Turbochargers Linear and Nonlinear Rotordynamics – Bearing Design – Rotor Balancing

    CERN Document Server

    Nguyen-Schäfer, Hung

    2012-01-01

    This book deals with rotordynamics of automotive turbochargers while encompassing the analysis of the dynamics of rotating machines at very high rotor speeds of 300,000 rpm and above. This interdisciplinary field involves 1. thermodynamics and turbo-matching knowledge to compute working conditions of turbochargers, 2. fluid and bearing dynamics to calculate various operating thrust loads and to design the rotating floating ring bearings (two-oil-film bearings), and 3. tribology to improve the rotor stability and to reduce the bearing friction. Mathematical background in modeling and simulation methods is necessary; however, the prerequisites have been kept to a minimum. The book addresses both practitioners working in the field of rotordynamics of automotive turbochargers and graduate students in mechanical engineering.

  15. The Realistic Mobility Evaluation of Vehicular Ad-Hoc Network for Indian Automotive Networks

    Directory of Open Access Journals (Sweden)

    V.S.Dhaka

    2014-04-01

    Full Text Available In recent years, continuous progress in wireless communication has opened a new research field in computer networks. Now a day’s wireless ad-hoc networking is an emerging research technology that needs attention of the industry people and the academicians. A vehicular ad-hoc network uses vehicles as mobile nodes to create mobility in a network. It’s a challenge to generate realistic mobility for Indian networks as no TIGER or Shapefile map is available for Indian Automotive Networks. This paper simulates the realistic mobility of the Vehicular Ad-hoc Networks (VANETs. The key feature of this work is the realistic mobility generation for the Indian Automotive Intelligent Transport System (ITS and also to analyze the throughput, packet delivery fraction (PDF and packet loss for realistic scenario. The experimental analysis helps in providing effective communication for safety to the driver and passengers.

  16. THE USE OF RECYCLED SOLID AUTOMOTIVE PAINT WASTES AS INGREDIENTS IN AUTOMOTIVE SEALANT PRODUCTS - PHASE II

    Science.gov (United States)

    About 75,000,000 lbs of paint sludge is generated by the U.S. automotive industry each year. This type of waste and (similar streams from other industries) make significant contributions to landfills. The solution proposed by ASTER, Inc., proven feasible during the Phase I of thi...

  17. THE USE OF RECYCLED SOLID AUTOMOTIVE PAINT WASTES AS INGREDIENTS IN AUTOMOTIVE SEALANT PRODUCTS - PHASE I

    Science.gov (United States)

    About 75,000,000 lbs. of paint sludge is generated by the U.S. automotive industry each year. This type of waste (and similar streams in other industries) make a significant contribution to landfills. A proposed solution is to recycle the paint sludge into compounding ingredients...

  18. Automotive Air Conditioning and Heating; Automotive Mechanics (Advanced): 9047.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This document presents an outline for a 135-hour course designed to provide the student with all the foundations necessary to become employable in the automotive air conditioning and heating trade. The course of study includes an orientation to the world of work, the elementary physics of air conditioning and heating, and laboratory experiments…

  19. COMPUTING

    CERN Multimedia

    P. MacBride

    The Computing Software and Analysis Challenge CSA07 has been the main focus of the Computing Project for the past few months. Activities began over the summer with the preparation of the Monte Carlo data sets for the challenge and tests of the new production system at the Tier-0 at CERN. The pre-challenge Monte Carlo production was done in several steps: physics generation, detector simulation, digitization, conversion to RAW format and the samples were run through the High Level Trigger (HLT). The data was then merged into three "Soups": Chowder (ALPGEN), Stew (Filtered Pythia) and Gumbo (Pythia). The challenge officially started when the first Chowder events were reconstructed on the Tier-0 on October 3rd. The data operations teams were very busy during the the challenge period. The MC production teams continued with signal production and processing while the Tier-0 and Tier-1 teams worked on splitting the Soups into Primary Data Sets (PDS), reconstruction and skimming. The storage sys...

  20. COMPUTING

    CERN Multimedia

    Matthias Kasemann

    Overview The main focus during the summer was to handle data coming from the detector and to perform Monte Carlo production. The lessons learned during the CCRC and CSA08 challenges in May were addressed by dedicated PADA campaigns lead by the Integration team. Big improvements were achieved in the stability and reliability of the CMS Tier1 and Tier2 centres by regular and systematic follow-up of faults and errors with the help of the Savannah bug tracking system. In preparation for data taking the roles of a Computing Run Coordinator and regular computing shifts monitoring the services and infrastructure as well as interfacing to the data operations tasks are being defined. The shift plan until the end of 2008 is being put together. User support worked on documentation and organized several training sessions. The ECoM task force delivered the report on “Use Cases for Start-up of pp Data-Taking” with recommendations and a set of tests to be performed for trigger rates much higher than the ...

  1. COMPUTING

    CERN Multimedia

    M. Kasemann

    Introduction A large fraction of the effort was focused during the last period into the preparation and monitoring of the February tests of Common VO Computing Readiness Challenge 08. CCRC08 is being run by the WLCG collaboration in two phases, between the centres and all experiments. The February test is dedicated to functionality tests, while the May challenge will consist of running at all centres and with full workflows. For this first period, a number of functionality checks of the computing power, data repositories and archives as well as network links are planned. This will help assess the reliability of the systems under a variety of loads, and identifying possible bottlenecks. Many tests are scheduled together with other VOs, allowing the full scale stress test. The data rates (writing, accessing and transfer¬ring) are being checked under a variety of loads and operating conditions, as well as the reliability and transfer rates of the links between Tier-0 and Tier-1s. In addition, the capa...

  2. COMPUTING

    CERN Multimedia

    Contributions from I. Fisk

    2012-01-01

    Introduction The start of the 2012 run has been busy for Computing. We have reconstructed, archived, and served a larger sample of new data than in 2011, and we are in the process of producing an even larger new sample of simulations at 8 TeV. The running conditions and system performance are largely what was anticipated in the plan, thanks to the hard work and preparation of many people. Heavy ions Heavy Ions has been actively analysing data and preparing for conferences.  Operations Office Figure 6: Transfers from all sites in the last 90 days For ICHEP and the Upgrade efforts, we needed to produce and process record amounts of MC samples while supporting the very successful data-taking. This was a large burden, especially on the team members. Nevertheless the last three months were very successful and the total output was phenomenal, thanks to our dedicated site admins who keep the sites operational and the computing project members who spend countless hours nursing the...

  3. COMPUTING

    CERN Multimedia

    I. Fisk

    2012-01-01

      Introduction Computing activity has been running at a sustained, high rate as we collect data at high luminosity, process simulation, and begin to process the parked data. The system is functional, though a number of improvements are planned during LS1. Many of the changes will impact users, we hope only in positive ways. We are trying to improve the distributed analysis tools as well as the ability to access more data samples more transparently.  Operations Office Figure 2: Number of events per month, for 2012 Since the June CMS Week, Computing Operations teams successfully completed data re-reconstruction passes and finished the CMSSW_53X MC campaign with over three billion events available in AOD format. Recorded data was successfully processed in parallel, exceeding 1.2 billion raw physics events per month for the first time in October 2012 due to the increase in data-parking rate. In parallel, large efforts were dedicated to WMAgent development and integrati...

  4. COMPUTING

    CERN Multimedia

    I. Fisk

    2013-01-01

    Computing operation has been lower as the Run 1 samples are completing and smaller samples for upgrades and preparations are ramping up. Much of the computing activity is focusing on preparations for Run 2 and improvements in data access and flexibility of using resources. Operations Office Data processing was slow in the second half of 2013 with only the legacy re-reconstruction pass of 2011 data being processed at the sites.   Figure 1: MC production and processing was more in demand with a peak of over 750 Million GEN-SIM events in a single month.   Figure 2: The transfer system worked reliably and efficiently and transferred on average close to 520 TB per week with peaks at close to 1.2 PB.   Figure 3: The volume of data moved between CMS sites in the last six months   The tape utilisation was a focus for the operation teams with frequent deletion campaigns from deprecated 7 TeV MC GEN-SIM samples to INVALID datasets, which could be cleaned up...

  5. COMPUTING

    CERN Multimedia

    2010-01-01

    Introduction Just two months after the “LHC First Physics” event of 30th March, the analysis of the O(200) million 7 TeV collision events in CMS accumulated during the first 60 days is well under way. The consistency of the CMS computing model has been confirmed during these first weeks of data taking. This model is based on a hierarchy of use-cases deployed between the different tiers and, in particular, the distribution of RECO data to T1s, who then serve data on request to T2s, along a topology known as “fat tree”. Indeed, during this period this model was further extended by almost full “mesh” commissioning, meaning that RECO data were shipped to T2s whenever possible, enabling additional physics analyses compared with the “fat tree” model. Computing activities at the CMS Analysis Facility (CAF) have been marked by a good time response for a load almost evenly shared between ALCA (Alignment and Calibration tasks - highest p...

  6. Nanofluids with CNTs for automotive applications

    Science.gov (United States)

    Srinivas, V.; Moorthy, Ch. V. K. N. S. N.; Dedeepya, V.; Manikanta, P. V.; Satish, V.

    2016-04-01

    This paper summarizes a recent work on anti-corrosive and enhanced heat transfer properties of carboxylated water based nanofluids. DI water mixed with Sebacic acid (C10H18O4) as carboxylate additive is dispersed with multi walled carbon nanotubes and tested for corrosion and heat transfer characteristics. Corrosion studies made as per ASTM D 1384 show that carboxylate water dispersed with MWCNTs is resistant to corrosion and hence suitable for automotive environment. In addition to MWCNTs, carboxylated water dispersed with nano sized silver, copper and Aluminium oxide are also tested for corrosion performance but found to be giving considerable corrosion in automotive environment. The stability of MWCNT based nanofluids in terms of zeta potential is found to be good with carboxylated water compared to DI water. Significant improvement is observed in the thermal conductivity of nanofluids dispersed with MWCNTs. There is a slight increase in viscosity and marginal decrease in the specific heat of nanofluids with addition of carboxylate as well as MWCNTs. The carboxylated water is dispersed with very low mass concentration of multi walled carbon nano tubes at 0.025, 0.05 and 0.1 % and tested for heat transfer performance. The heat transfer studies are made in Reynolds number range of 2500-6000 in the developing flow regime. The heat transfer performance of nanofluids is carried out on an air cooled heat exchanger similar to an automotive radiator with incoming air velocities across radiator maintained at 5, 10 and 15 m/s. The coolant side overall heat transfer coefficient and overall heat transfer coefficient have improved markedly. It is also found that the velocity of air and flow rate of coolant plays an important role in enhancement of overall heat transfer coefficient. Stanton number correlation for the entire data has been developed. It is found that the wall temperature gradients play an important role in the enhancement of heat transfer when nanofluids are

  7. Application of Evolutionary Computation in Automotive Powertrain Mount Tuning

    Directory of Open Access Journals (Sweden)

    Anab Akanda

    2006-01-01

    Full Text Available Engine mount tuning is a multi-disciplinary exercise since it affects Idle-shake, Road-shake and power-train noise response. Engine inertia is often used as a tuned absorber for controlling suspension resonance related road-shake issues. Last but not least, vehicle ride and handling may also be affected by mount tuning. In this work, Torque-Roll-Axis (TRA decoupling of the rigid powertrain was used as a starting point for mount tuning. Nodal point of flexible powertrain bending was used to define the envelop for transmission mount locations. The frequency corresponding to the decoupled roll mode of the rigid powertrain was then adjusted for idle-shake and road-shake response management.

  8. An Overview of NASA Automotive Component Reliability Studies

    Science.gov (United States)

    Sampson, Michael J.

    2016-01-01

    The results of NASAs studies into the appropriateness of using US Automotive electronic parts in NASA spaceflight systems will be presented. The first part of the presentation provides an overview of the United States Automotive Electronics Councils AECQ standardization program, the second part provides a summary of the results of NASAs procurement and testing experiences and other lessons learned along with preliminary test results.

  9. Cooling System: Automotive Mechanics Instructional Program. Block 6.

    Science.gov (United States)

    O'Brien, Ralph D.

    The last of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in the automotive cooling system at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each…

  10. Automotive fuels. Quality current and future perspectives

    International Nuclear Information System (INIS)

    In the present paper, a general view of the automotive fuel characteristics and of the influence of the most important fuel parameters on the engine performance and emissions are presented. At short term, the future scenario is conditioned by the application of the next European Directive on fuel specifications, that will came into effect on 1 January 2000. The composition of liquid fuels shall be subject to modifications nd restrictions to meet the new specifications Among alternative fuels, natural gas and Lpg (liquefied petroleum gases) are the most interesting in the view point of environmental protection. Biodiesel constitutes a potential and valid alternative to mineral gas oil in diesel engines

  11. Characterization of three-way automotive catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kenik, E.A.; More, K.L. [Oak Ridge National Laboratory, TN (United States); LaBarge, W. [General Motors-AC Delco Systems, Flint, MI (United States)] [and others

    1995-05-01

    This has been the second year of a CRADA between General Motors - AC Delco Systems (GM-ACDS) and Martin Marietta Energy Systems (MMES) aimed at improved performance/lifetime of platinum-rhodium based three-way-catalysts (TWC) for automotive emission control systems. While current formulations meet existing emission standards, higher than optimum Pt-Rh loadings are often required. In additionk, more stringent emission standards have been imposed for the near future, demanding improved performance and service life from these catalysts. Understanding the changes of TWC conversion efficiency with ageing is a critical need in improving these catalysts.

  12. Advanced high strength steels for automotive industry

    International Nuclear Information System (INIS)

    The car industry is facing pressure because of the growing demand for more fuel-efficient passenger cars. In order to limit energy consumption and air pollution the weight of the car body has to be reduced. At the same time, high levels of safety have to be guaranteed. In this situation, the choice of material becomes a key decision in car design. As a response to the requirements of the automotive sector, high strength steels and advanced high strength steels have been developed by the steel industry. These modern steel grades offer an excellent balance of low cost, light weight and mechanical properties. (Author) 48 refs.

  13. Dynamic characteristics of automotive steel sheets

    Directory of Open Access Journals (Sweden)

    M. Mihaliková

    2016-10-01

    Full Text Available The aim of this experimental research was to perform an analysis of deformation characteristics on two different types of steel: IF steel, and micro-alloyed steel were used automotive industry. For that purpose changes of properties of these materials were carried out by static 10-3 · s-1 and dynamic 103 · s-1 strain rate assess its plastic properties. Vickers micro hardness test was carried out by the static and dynamic loading condition and describes different hardness distribution. The higher strain hardening of materials was obtained too that was confirmed by distribution of dislocations.

  14. Forward-looking automotive radar sensor

    Science.gov (United States)

    Ganci, Paul; Potts, Steven; Okurowski, Frank

    1995-12-01

    For intelligent cruise control (ICC) and forward looking collision warning systems to be successful products they must provide robust performance in a complex roadway environment. Inconveniences caused by dropped tracks and nuisance alarms will not be tolerated by consumers, and would likely result in rejection of these new technologies in the marketplace. The authors report on a low-cost automotive millimeter wave (MMW) radar design which addresses shortcomings associated with previously reported ICC system implementations. The importance of the sensor's ability to identify and separately track all obstacles in the field of view is discussed. The applicability of the MMW's FM-CW sensor implementation to collision warning systems is also discussed.

  15. COMPUTING

    CERN Multimedia

    I. Fisk

    2011-01-01

    Introduction The Computing Team successfully completed the storage, initial processing, and distribution for analysis of proton-proton data in 2011. There are still a variety of activities ongoing to support winter conference activities and preparations for 2012. Heavy ions The heavy-ion run for 2011 started in early November and has already demonstrated good machine performance and success of some of the more advanced workflows planned for 2011. Data collection will continue until early December. Facilities and Infrastructure Operations Operational and deployment support for WMAgent and WorkQueue+Request Manager components, routinely used in production by Data Operations, are provided. The GlideInWMS and components installation are now deployed at CERN, which is added to the GlideInWMS factory placed in the US. There has been new operational collaboration between the CERN team and the UCSD GlideIn factory operators, covering each others time zones by monitoring/debugging pilot jobs sent from the facto...

  16. COMPUTING

    CERN Multimedia

    M. Kasemann

    CMS relies on a well functioning, distributed computing infrastructure. The Site Availability Monitoring (SAM) and the Job Robot submission have been very instrumental for site commissioning in order to increase availability of more sites such that they are available to participate in CSA07 and are ready to be used for analysis. The commissioning process has been further developed, including "lessons learned" documentation via the CMS twiki. Recently the visualization, presentation and summarizing of SAM tests for sites has been redesigned, it is now developed by the central ARDA project of WLCG. Work to test the new gLite Workload Management System was performed; a 4 times increase in throughput with respect to LCG Resource Broker is observed. CMS has designed and launched a new-generation traffic load generator called "LoadTest" to commission and to keep exercised all data transfer routes in the CMS PhE-DEx topology. Since mid-February, a transfer volume of about 12 P...

  17. Advanced microsystems for automotive applications 2008

    Energy Technology Data Exchange (ETDEWEB)

    Valldorf, J.; Gessner, W. (eds.) [VDI/VDE Innovation und Technik GmbH, Berlin (Germany)

    2008-07-01

    With the total number of vehicles steadily increasing and soon approaching one billion, the world is facing serious challenges in terms of both safety of road transport and sustainability. Consequently the two major persistent issues for the automotive industry are improved safety and reduced emissions. The integration of complex microsystems with enhanced intelligence has enabled an increase in efficiency of the previously 'dumb' internal combustion engine by an average 1% annually during the last 20 years. In the future, such smart systems may help to leverage novel powertrain concepts towards the zero emission vehicle. Particularly for electric cars, anticipatory power management and efficient driving assistance will be needed to overcome range limitations. Electrical in-wheel motors equipped with novel miniaturized functionalities will be required. Intelligent systems for tire monitoring and control deserve special attention as well, since insufficient tire pressure accounts for more than 3% of the efficiency losses in the car. The conference book in hand is a showroom of activities, the International Forum on Advanced Microsystems for Automotive Applications (AMAA) has been known for during the last 12 years: advanced sensors including one based on the giant magneto resistance (GMR) effect, several camera and radar systems making road traffic safer by assisting the driver in recognizing pedestrians and obstacles, and human-machine interfaces based on the recognition of hand gestures - a striking example of how smart systems will further enhance the usability of vehicles and the comfort of driving. (orig.)

  18. Performance evaluation of an automotive thermoelectric generator

    Science.gov (United States)

    Dubitsky, Andrei O.

    Around 40% of the total fuel energy in typical internal combustion engines (ICEs) is rejected to the environment in the form of exhaust gas waste heat. Efficient recovery of this waste heat in automobiles can promise a fuel economy improvement of 5%. The thermal energy can be harvested through thermoelectric generators (TEGs) utilizing the Seebeck effect. In the present work, a versatile test bench has been designed and built in order to simulate conditions found on test vehicles. This allows experimental performance evaluation and model validation of automotive thermoelectric generators. An electrically heated exhaust gas circuit and a circulator based coolant loop enable integrated system testing of hot and cold side heat exchangers, thermoelectric modules (TEMs), and thermal interface materials at various scales. A transient thermal model of the coolant loop was created in order to design a system which can maintain constant coolant temperature under variable heat input. Additionally, as electrical heaters cannot match the transient response of an ICE, modelling was completed in order to design a relaxed exhaust flow and temperature history utilizing the system thermal lag. This profile reduced required heating power and gas flow rates by over 50%. The test bench was used to evaluate a DOE/GM initial prototype automotive TEG and validate analytical performance models. The maximum electrical power generation was found to be 54 W with a thermal conversion efficiency of 1.8%. It has been found that thermal interface management is critical for achieving maximum system performance, with novel designs being considered for further improvement.

  19. Topology Optimization in Automotive Brake Pedal Redesign

    Directory of Open Access Journals (Sweden)

    Mohd Nizam Sudin

    2014-03-01

    Full Text Available Nowadays, automotive industry is continuing to strive for light weight vehicle in improving fuel efficiency and emissions reduction. To produce a better performance car it is important to design vehicles with optimum weight. In order to reduce the weight of vehicle without sacrificing its integrity, this project aims to employ topology optimization technique to propose an optimal design of an automotive component in early phase of product development. In this project the material used for an existing brake pedal is unchanged as this study focuses on reducing weight of existing brake pedal without material substitution. The digital model of an existing brake pedal was generated using CATIA V5 solid modelling software. Topology optimization was performed by using Altair Optistruct software under linear static stress analysis. Finally, a new light weight design brake pedal is proposed. The result of the study shows that the weight of a new designed brake pedal was 22% less as compared to an existing brake pedal without sacrificing its performance requirement.

  20. Requirements for future automotive batteries - a snapshot

    Science.gov (United States)

    Karden, Eckhard; Shinn, Paul; Bostock, Paul; Cunningham, James; Schoultz, Evan; Kok, Daniel

    Introduction of new fuel economy, performance, safety, and comfort features in future automobiles will bring up many new, power-hungry electrical systems. As a consequence, demands on automotive batteries will grow substantially, e.g. regarding reliability, energy throughput (shallow-cycle life), charge acceptance, and high-rate partial state-of-charge (HRPSOC) operation. As higher voltage levels are mostly not an economically feasible alternative for the short term, the existing 14 V electrical system will have to fulfil these new demands, utilizing advanced 12 V energy storage devices. The well-established lead-acid battery technology is expected to keep playing a key role in this application. Compared to traditional starting-lighting-ignition (SLI) batteries, significant technological progress has been achieved or can be expected, which improve both performance and service life. System integration of the storage device into the vehicle will become increasingly important. Battery monitoring systems (BMS) are expected to become a commodity, penetrating the automotive volume market from both highly equipped premium cars and dedicated fuel-economy vehicles (e.g. stop/start). Battery monitoring systems will allow for more aggressive battery operating strategies, at the same time improving the reliability of the power supply system. Where a single lead-acid battery cannot fulfil the increasing demands, dual-storage systems may form a cost-efficient extension. They consist either of two lead-acid batteries or of a lead-acid battery plus another storage device.

  1. Experiments and simulations on heat exchangers in thermoelectric generator for automotive application

    International Nuclear Information System (INIS)

    In this work, an energy-harvesting system which extracts heat from an automotive exhaust pipe and turns the heat into electricity by using thermoelectric power generators (TEGs) was built. Experiments show that the temperature difference in automotive system is not constant, especially the heat exchanger, which cannot provide the thermoelectric modules (TMs) large amount of heat. The thermal performance of different heat exchangers in exhaust-based TEGs is studied in this work, and the thermal characteristics of heat exchangers with different internal structures and thickness are discussed, to obtain higher interface temperature and thermal uniformity. Following computational fluid dynamics simulations, infrared experiments and output power testing system are carried out on a high-performance production engine with a dynamometer. Results show that a plate-shaped heat exchanger with chaos-shaped internal structure and thickness of 5 mm achieves a relatively ideal thermal performance, which is practically useful to enhance the thermal performance of the TEG, and larger total output power can be thus obtained. - Graphical abstract: The thermal and electrical characteristics of different heat exchangers of automotive exhaust-based thermoelectric generator are discussed, to obtain higher interface temperature and thermal uniformity. - Highlights: • Different internal structures and thickness of heat exchangers were proposed. • Power output testing system of the two heat exchangers was characterized. • Chaos-shaped heat exchanger (5 mm thickness) shows better performance

  2. A computer simulation-based analysis of supply chains resilience in industrial environment

    OpenAIRE

    P. Wicher; D. Staš; Karkula, M.; R. Lenort; P. Besta

    2015-01-01

    The article presents a computer simulation-based model for analysis of supply chain resilience, which allows determining and verifying the generally valid principles, capabilities and ways for building long-term resilience of global supply chains against serious disruptions. The model is created on the basis of a supply chain from automotive industry and contains the main logistics flows used by present automotive producers. Any real automotive supply chain can be modelled as a co...

  3. Modeling and Fluid Flow Analysis of Wavy Fin Based Automotive Radiator

    Directory of Open Access Journals (Sweden)

    Vishwa Deepak Dwivedi

    2015-01-01

    Full Text Available In continuous technological development, an automotive industry has increased the demand for high efficiency engines. A high efficiency engines in not only based on its performance but also for better fuel economy and less emission rate. Radiator is one of the important parts of the internal combustion engine cooling system. The manufacturing cost of the radiator is 20 percent of the whole cost of the engine. So improving the performance and reducing cost of radiators are necessary research. For higher cooling capacity of radiator, addition of fins is one of the approaches to increase the cooling rate of the radiator. In addition, heat transfer fluids at air and fluid side such as water and ethylene glycol exhibit very low thermal conductivity. As a result there is a need for new and innovative heat transfer fluids, known as “Nano fluid” for improving heat transfer rate in an automotive radiator. Recently there have been considerable research findings highlighting superior heat transfer performances of nanofluids about 15-25% of heat transfer enhancement can be achieved by using types of nanofluids. With these specific characteristics, the size and weight of an automotive car radiator can be reduced without affecting its heat transfer performance. An automotive radiator (Wavy fin type model is modeled on modeling software CATIA V5 and performance evaluation is done on pre-processing software ANSYS 14.0. The temperature and velocity distribution of coolant and air are analyzed by using Computational fluid dynamics environment software CFX. Results have shown that the rate of heat transfer is better when nano fluid (Si C + water is used as coolant, than the conventional coolant.

  4. Predictive Process Optimization for Fracture Ductility in Automotive TRIP Steels

    Science.gov (United States)

    Gong, Jiadong

    In light of the emerging challenges in the automotive industry of meeting new energy-saving and environment-friendly requirements imposed by both the government and the society, the auto makers have been working relentlessly to reduce the weight of automobiles. While steel makers pushed out a variety of novel Advanced High Strength Steels (AHSS) to serve this market with new needs, TRIP (Transformation Induced Plasticity) steels is one of the most promising materials for auto-body due to its exceptional combination of strength and formability. However, current commercial automotive TRIP steels demonstrate relatively low hole-expansion (HE) capability, which is critical in stretch forming of various auto parts. This shortcoming on ductility has been causing fracture issues in the forming process and limits the wider applications of this steel. The kinetic theory of martensitic transformations and associated transformation plasticity is applied to the optimization of transformation stability for enhanced mechanical properties in a class of high strength galvannealed TRIP steel. This research leverages newly developed characterization and simulation capabilities, supporting computational design of high-performance steels exploiting optimized transformation plasticity for desired mechanical behaviors, especially for the hole-expansion ductility. The microstructure of the automotive TRIP sheet steels was investigated, using advanced tomographic characterization including nanoscale Local Electrode Atom Probe (LEAP) microanalysis. The microstructural basis of austenite stability, the austenite carbon concentration in particular, was quantified and correlated with measured fracture ductility through transformation plasticity constitutive laws. Plastic flow stability for enhanced local fracture ductility at high strength is sought to maintain high hole-expansion ductility, through quantifying the optimal stability and the heat-treatment process to achieve it. An additional

  5. Bosch automotive electrics and automotive electronics systems and components, networking and hybrid drive

    CERN Document Server

    2014-01-01

    The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the "Automotive Electric, Automotive Electronics" technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle. Content Electrical and electronical systems – Basic principles of networking - Examples of networked vehicles – Bus systems – Architecture of electronic systems – Mechatronics – Elektronics – Electronic control Units – Software – Sensors – Actuators – Hybrid drives – Vehicle electrical system – Start...

  6. Advances in LEDs for automotive applications

    Science.gov (United States)

    Bhardwaj, Jy; Peddada, Rao; Spinger, Benno

    2016-03-01

    High power LEDs were introduced in automotive headlights in 2006-2007, for example as full LED headlights in the Audi R8 or low beam in Lexus. Since then, LED headlighting has become established in premium and volume automotive segments and beginning to enable new compact form factors such as distributed low beam and new functions such as adaptive driving beam. New generations of highly versatile high power LEDs are emerging to meet these application needs. In this paper, we will detail ongoing advances in LED technology that enable revolutionary styling, performance and adaptive control in automotive headlights. As the standards which govern the necessary lumens on the road are well established, increasing luminance enables not only more design freedom but also headlight cost reduction with space and weight saving through more compact optics. Adaptive headlighting is based on LED pixelation and requires high contrast, high luminance, smaller LEDs with high-packing density for pixelated Matrix Lighting sources. Matrix applications require an extremely tight tolerance on not only the X, Y placement accuracy, but also on the Z height of the LEDs given the precision optics used to image the LEDs onto the road. A new generation of chip scale packaged (CSP) LEDs based on Wafer Level Packaging (WLP) have been developed to meet these needs, offering a form factor less than 20% increase over the LED emitter surface footprint. These miniature LEDs are surface mount devices compatible with automated tools for L2 board direct attach (without the need for an interposer or L1 substrate), meeting the high position accuracy as well as the optical and thermal performance. To illustrate the versatility of the CSP LEDs, we will show the results of, firstly, a reflector-based distributed low beam using multiple individual cavities each with only 20mm height and secondly 3x4 to 3x28 Matrix arrays for adaptive full beam. Also a few key trends in rear lighting and impact on LED light

  7. MICROALLOYED STEELS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Debanshu Bhattacharya

    2014-12-01

    Full Text Available Two major drivers for the use of newer steels in the automotive industry are fuel efficiency and increased safety performance. Fuel efficiency is mainly a function of weight of steel parts, which in turn, is controlled by gauge and design. Safety is determined by the energy absorbing capacity of the steel used to make the part. All of these factors are incentives for the U.S. automakers to use both Highly Formable and Advanced High Strength Steels (AHSS to replace the conventional steels used to manufacture automotive parts in the past. AHSS is a general term used to describe various families of steels. The most common AHSS is the dual-phase steel that consists of a ferrite-martensite microstructure. These steels are characterized by high strength, good ductility, low tensile to yield strength ratio and high bake hardenability. Another class of AHSS is the complex-phase or multi-phase steel which has a complex microstructure consisting of various phase constituents and a high yield to tensile strength ratio. Transformation Induced Plasticity (TRIP steels is another class of AHSS steels finding interest among the U.S. automakers. These steels consist of a ferrite-bainite microstructure with significant amount of retained austenite phase and show the highest combination of strength and elongation, so far, among the AHSS in use. High level of energy absorbing capacity combined with a sustained level of high n value up to the limit of uniform elongation as well as high bake hardenability make these steels particularly attractive for safety critical parts and parts needing complex forming. A relatively new class of AHSS is the Quenching and Partitioning (Q&P steels. These steels seem to offer higher ductility than the dual-phase steels of similar strengths or similar ductility as the TRIP steels at higher strengths. Finally, martensitic steels with very high strengths are also in use for certain parts. The most recent initiative in the area of AHSS

  8. Modeling supply chain costs in the automotive manufacturing industry: The case of Valmet Automotive

    OpenAIRE

    Koivula, Lauri

    2015-01-01

    This thesis examines mathematical modeling as a means to improve profitability. The research is focused on studying supply chain cost drivers and their potential in regard to cost reduction in the automotive manufacturing industry, where the role of supply chain management is significant because of the capital intensive, fast paced, and high volume nature of the business. Hence, supportive tools for decision making are highly valuable. Therefore, the objective of this study is to develop a to...

  9. Automotive supply chain through the "control tower"-model : case Valmet Automotive

    OpenAIRE

    Kolehmainen, Karolina

    2013-01-01

    The aim of this thesis was to create comprehensive understanding about the Supply Chain management in a world class external logistics service that was created to fulfill Valmet Automotive’s project D1. This thesis consists of a detailed process description of the inbound- and outbound logistics operations regarding the production of Daimler’s Mercedes Benz A-series, at Valmet Automotive factory in Uusikaupunki, Finland. The process description emphasizes the important role of the 3PL service...

  10. Carbon fiber reinforced thermoplastic composites for future automotive applications

    Science.gov (United States)

    Friedrich, K.

    2016-05-01

    After a brief introduction to polymer composite properties and markets, the state of the art activities in the field of manufacturing of advanced composites for automotive applications are elucidated. These include (a) long fiber reinforced thermoplastics (LFT) for secondary automotive components, and (b) continuous carbon fiber reinforced thermosetting composites for car body applications. It is followed by future possibilities of carbon fiber reinforced thermoplastic composites for e.g. (i) crash elements, (ii) racing car seats, and (iii) production and recycling of automotive fenders.

  11. Design of a magnetorheological automotive shock absorber

    Science.gov (United States)

    Lindler, Jason E.; Dimock, Glen A.; Wereley, Norman M.

    2000-06-01

    Double adjustable shock absorbers allow for independent adjustment of the yield force and post-yield damping in the force versus velocity response. To emulate the performance of a conventional double adjustable shock absorber, a magnetorheological (MR) automotive shock absorber was designed and fabricated at the University of Maryland. Located in the piston head, an applied magnetic field between the core and flux return increases the force required for a given piston rod velocity. Between the core and flux return, two different shaped gaps meet the controllable performance requirements of a double adjustable shock. A uniform gap between the core and the flux return primarily adjusts the yield force of the shock absorber, while a non-uniform gap allows for control of the post-yield damping. Force measurements from sinusoidal displacement cycles, recorded on a mechanical damper dynamometer, validate the performance of uniform and non- uniform gaps for adjustment of the yield force and post-yield damping, respectively.

  12. CRM Implementation in the Automotive Industry

    OpenAIRE

    Öner, Dila; Xhemali, Lorena

    2009-01-01

    Date:                  2009-05-27 Level:                 Master Thesis in International Business and Entrepreneurship, 15 ECTS Institution:        School of Sustainable Development of Society and Technology, Mälardalen University   Title:                  The Implementation of Customer Relationship Management (CRM) in the Automotive Industry   Supervisor:       Peter Ekman Research           Exploiting the stages of CRM implementation and looking into the obstacles faced Issue:               ...

  13. Downsizing assessment of automotive Stirling engines

    Science.gov (United States)

    Knoll, R. H.; Tew, R. C., Jr.; Klann, J. L.

    1983-01-01

    A 67 kW (90 hp) Stirling engine design, sized for use in a 1984 1440 kg (3170 lb) automobile was the focal point for developing automotive Stirling engine technology. Since recent trends are towards lighter vehicles, an assessment was made of the applicability of the Stirling technology being developed for smaller, lower power engines. Using both the Philips scaling laws and a Lewis Research Center (Lewis) Stirling engine performance code, dimensional and performance characteristics were determined for a 26 kW (35 hp) and a 37 kW (50 hp) engine for use in a nominal 907 kg (2000 lb) vehicle. Key engine elements were sized and stressed and mechanical layouts were made to ensure mechanical fit and integrity of the engines. Fuel economy estimates indicated that the Stirling engine would maintain a 30 to 45 percent fuel economy advantage comparable spark ignition and diesel powered vehicles in the 1984 period.

  14. Fault Detection for Automotive Shock Absorber

    Science.gov (United States)

    Hernandez-Alcantara, Diana; Morales-Menendez, Ruben; Amezquita-Brooks, Luis

    2015-11-01

    Fault detection for automotive semi-active shock absorbers is a challenge due to the non-linear dynamics and the strong influence of the disturbances such as the road profile. First obstacle for this task, is the modeling of the fault, which has been shown to be of multiplicative nature. Many of the most widespread fault detection schemes consider additive faults. Two model-based fault algorithms for semiactive shock absorber are compared: an observer-based approach and a parameter identification approach. The performance of these schemes is validated and compared using a commercial vehicle model that was experimentally validated. Early results shows that a parameter identification approach is more accurate, whereas an observer-based approach is less sensible to parametric uncertainty.

  15. Design of Polymer Coatings in Automotive Engines

    Institute of Scientific and Technical Information of China (English)

    LIAO Han-lin; ZHANG Ga; BORDES Jean-Michel; CHRISTIAN Coddet

    2004-01-01

    Driven by economical and ecological reasons, thermoplastics based coatings were more and more used in automotive engines. Two design concepts, flame spraying and serigraphy PEEK coatings on light metal substrate, were introduced in this paper. The friction and wear behavior of PEEK based coatings were investigated systematically. Coatings with different crystallinities can be obtained when cooling speed is controlled. Among three sprayed coatings considered with different crystallinities, the one with highest crystallinity exhibits best friction and wear behavior under dry sliding condition. Under lubricated sliding condition, however, the amorphous coating gives lower friction coefficient. The micron particles such as SiC,MoS2 and graphite in composite coatings can improve significantly the coating wear resistance and have a impact on coating friction behavior.

  16. Automotive radar - investigation of mutual interference mechanisms

    Science.gov (United States)

    Goppelt, M.; Blöcher, H.-L.; Menzel, W.

    2010-09-01

    In the past mutual interference between automotive radar sensors has not been regarded as a major problem. With an increasing number of such systems, however, this topic is receiving more and more attention. The investigation of mutual interference and countermeasures is therefore one topic of the joint project "Radar on Chip for Cars" (RoCC) funded by the German Federal Ministry of Education and Research (BMBF). RoCC's goal is to pave the way for the development of high-performance, low-cost 79 GHz radar sensors based on Silicon-Germanium (SiGe) Monolithic Microwave Integrated Circuits (MMICs). This paper will present some generic interference scenarios and report on the current status of the analysis of interference mechanisms.

  17. Electromagnetic interference filter for automotive electrical systems

    Science.gov (United States)

    Herron, Nicholas Hayden; Carlson, Douglas S; Tang, David; Korich, Mark D

    2013-07-02

    A filter for an automotive electrical system includes a substrate having first and second conductive members. First and second input terminals are mounted to the substrate. The first input terminal is electrically connected to the first conductive member, and the second input terminal is electrically connected to the second conductive member. A plurality of capacitors are mounted to the substrate. Each of the capacitors is electrically connected to at least one of the first and second conductive members. First and second power connectors are mounted to the substrate. The first power connector is electrically connected to the first conductive member, and the second power connector is electrically connected to the second conductive member. A common mode choke is coupled to the substrate and arranged such that the common mode choke extends around at least a portion of the substrate and the first and second conductive members.

  18. Improvement of Automotive Part Supplier Performance Evaluation

    Science.gov (United States)

    Kongmunee, Chalermkwan; Chutima, Parames

    2016-05-01

    This research investigates the problem of the part supplier performance evaluation in a major Japanese automotive plant in Thailand. Its current evaluation scheme is based on experiences and self-opinion of the evaluators. As a result, many poor performance suppliers are still considered as good suppliers and allow to supply parts to the plant without further improvement obligation. To alleviate this problem, the brainstorming session among stakeholders and evaluators are formally conducted. The result of which is the appropriate evaluation criteria and sub-criteria. The analytical hierarchy process is also used to find suitable weights for each criteria and sub-criteria. The results show that a newly developed evaluation method is significantly better than the previous one in segregating between good and poor suppliers.

  19. Determining organic pollutants in automotive industry sludge.

    Science.gov (United States)

    Munaretto, Juliana S; Wonghon, Audrey L; von Mühlen, Carin

    2012-12-01

    In Brazil, the policy for disposing industrial sludge is changing from an emphasis on using controlled landfills to other treatment or co-processing methods; however, the monitoring of organic pollutants is not mandatory. The present study evaluated two general screening methods for organic pollutants in sludge generated in an automotive industrial complex in southern Brazil. The screening was performed using Soxhlet and sonication extractions and Gas Chromatograph coupled with Quadrupole Mass Spectrometry (GC/qMS). It was concluded that both techniques were effective and that most of the compounds identified were alkanes, phenols and esters. Important pollutants were detected in the sludge, which confirms the necessity of monitoring this type of residue. PMID:23007373

  20. Executable UML Modeling For Automotive Embedded Systems

    International Nuclear Information System (INIS)

    Engineers are more and more faced to the hard problem of sophisticated real-time System whereas time to market becomes always smaller. Object oriented modeling supported by UML standard brings effective solutions to such problems. However the possibility to specify real-time aspects of an application are not yet fully satisfactory Indeed, existing industrial proposals supply good answers to concurrency specification problem but they are yet limited regarding to real-time quantitative properties specification of an application. This work aims to construct a complete and consistent UML methodology based on a profile dedicated to automotive embedded Systems modeling and prototyping. This profile contains ail needed extensions to express easily the real-time quantitative properties of an application. Moreover, thanks to the formalization of UML protocol state machines, real-time concepts have been well-integrated in the object oriented paradigm. The main result of this deep integration is that a user is now able to model real-time Systems through the classical object oriented view i.e. without needing any specific knowing in real-time area. In order to answer to an industrial requirement, Systems prototyping (key point for car industry) the ACCORD/UML approach allows also to build executable models of an application. For that purpose, the method supplies a set of rules allow.ng to remove UML ambiguous semantics points, to complete semantics variation points and then to obtain a complete and coherent global model of an application being executable. The work of UML extension and its using formalization realized all along this thesis supplied also a complete and non-ambiguous modeling framework for automotive electronics Systems development. This is also a base particularly well-suited to tackle other facets of the Systems development as automatic and optimized code generation, validation, simulation or tests. (author)

  1. Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation and Topological Studies

    Science.gov (United States)

    Kumar, Sumeet; Heister, Stephen D.; Xu, Xianfan; Salvador, James R.; Meisner, Gregory P.

    2013-06-01

    A comprehensive numerical model has been proposed to model thermoelectric generators (TEGs) for automotive waste heat recovery. Details of the model and results from the analysis of General Motors' prototype TEG were described in part I of the study. In part II of this study, parametric evaluations are considered to assess the influence of heat exchanger, geometry, and thermoelectric module configurations to achieve optimization of the baseline model. The computational tool is also adapted to model other topologies such as transverse and circular configurations (hexagonal and cylindrical) maintaining the same volume as the baseline TEG. Performance analysis of these different topologies and parameters is presented and compared with the baseline design.

  2. INVESTIGATION OF CLEANER TECHNOLOGIES TO MINIMIZE AUTOMOTIVE COOLANT WASTES

    Science.gov (United States)

    The US Environmental Protection Agency in cooperation with the State of New Jersey evaluated chemical filtration and distillation technologies designed to recycle automotive and heavy-duty engine coolants. These evaluations addressed the product quality, waste reduction and econo...

  3. Conference on Future Automotive Technology Focus Electro Mobility

    CERN Document Server

    2013-01-01

    The increasing trend towards electric cars leads to several challenges for the automobile industry, research institutes and politics as well as for the society. Research and serial development move closer together to meet automotive standards with new components such as traction batteries integrated into hybrid and electrical drivetrains. Furthermore, the influence of e-mobility on the daily mobility behavior, the effects on the automotive supply chain and the impact on industrial production have to be taken into account. According to these complex aspects it is crucial to not only acquire specific knowledge in the particular fields but also to consider their functional interaction. Therefore, it seems essential to merge competence from science, economy and politics. This year, the annual „Conference on Future Automotive Technology“ as the follow-up of the „2. Automobiltechnisches Kolloquium München” focuses on the economical realization of widespread automotive electro mobility. Contents - Energy St...

  4. THE AUTOMOTIVE INDUSTRY IN A NEW TEHNOLOGICAL ERA

    Directory of Open Access Journals (Sweden)

    Simona Catalina ALBULESCU

    2014-11-01

    Full Text Available The business world is changing at an impressive speed: the global financial crisis, challenging markets, technology and talent crisis have a major impact on business. The last century can be associated with the triumph of the automobile industry. At the beginning of the 21st century the automotive industry has experienced one of the largest shifts in the automotive history. The new CO2 regulations on global level have determined the automotove industry to adopt new and original technologies faster than anticipated. The emerging tendency of car sharing in larger cities added to the media information related to the negative environmental effects of car mobility generate concerns that customers were seeking a replacement to the traditional, individual car ownership. The automotive industry will face challenging years ahead taking into consideration the shifting paradigm in auto-mobility. In this context, this article aims to provide a general perspective of the tendencies in the automotive sector.

  5. COMPOSITION CHANGES IN REFRIGERANT BLENDS FOR AUTOMOTIVE AIR CONDITIONING

    Science.gov (United States)

    Three refrigerant blends used to replace CFC-12 in automotive air conditioners were evaluated for composition changes due to typical servicing and leakage. When recommended service procedures were followed, changes in blend compositions were relatively small. Small changes in b...

  6. Transitions: the state of the automotive industry–a summary

    OpenAIRE

    Emily Engel; William A. Strauss

    2007-01-01

    The United States automotive industry has been undergoing tremendous changes in recent years. Speakers at a recent Chicago Fed conference explored these changes and considered the road to the future for the auto industry.

  7. GUIDES TO POLLUTION PREVENTION: THE AUTOMOTIVE REFINISHING INDUSTRY

    Science.gov (United States)

    Automotive refinishing shops generate a variety of wastes while performing typical auto body repair and refinishing operations such as welding, filling dents, body section adjustments, alignments, sanding and painting. pportunities for waste reduction exist for the waste thinners...

  8. Reliability Considerations of Flip Chip Components for Automotive Electronic Applications

    OpenAIRE

    Iwao Tachikawa; Naoharu Tsuzimoto; Isao Bansaku; Keisuke Sugiyama

    1981-01-01

    Electronic devices for automotive electronic applications have to be operated under extreme environmental conditions and therefore are required to have higher reliability compared with general electronic equipment. Recently automotive voltage regulators, ignition systems, etc. have been changing from mechanical constructions to electronic ones using thick film technology.This paper presents results that shows that our flip chip IC technology can satisfy the high reliability requirements of au...

  9. Recycling glass fibre-reinforced plastics in the automotive sector

    OpenAIRE

    Regenfelder, M.; Faller, J; Dully, S.; Perthes, H.; Williams, I. D.; den Boer, E.; Obersteiner, G.; Scherhaufer, S.

    2014-01-01

    The automotive sector is facing the challenge to become more resource-efficient in the manufacture of cars and their components. One approach is to increase the share of recycled materials. This paper presents the results of a case study for the automotive sector of the EU-funded Zerowin project. A safety-relevant component of the braking system was selected for manufacture using a mechanically recycled composite plastic material (polyethylene terephthalate reinforced with short glas...

  10. Joining Technology of Dissimilar Materials for Automotive Components(Ⅱ)

    Institute of Scientific and Technical Information of China (English)

    Meung Ho Rhee; Jong Ho Song; Woo Young Chung; Young Myoung Kim

    2004-01-01

    Joining techniques of dissimilar materials for lightweight multi-material automotive body structure were discussed. The joining of 1 .4 mm thickness steel and 2 mm thickness of Al were performed by the new method that is hybrid laser welding system. After aluminum and steel were welded by laser hybrid welding process, the micro-structure investment and the micro-hardness test were carried out. Hybrid laser welding promises a bright future in joining technology of dissimilar materials for automotive components.

  11. POTENTIAL USE OF MAGNESIUM ALLOYS FOR THE AUTOMOTIVE INDUSTRY

    OpenAIRE

    KANDEMİR, Kudret; A. Çetin CAN

    2003-01-01

    Recently, there is a high interest in using lightweight materials for automotive applications where weight reduction and improvement in comfort are needed. Magnesium alloys with excellent specific strength and stiffness properties can be comparable with steel and aluminum alloys for applications in the automotive industry. For this reason, the properties of magnesium alloys are in the focus of research. This study aims at reviewing and evaluating the prospects of magnesium alloys use and appl...

  12. Randomized CFRTP tape piece laminates in structural automotive applications

    OpenAIRE

    Darvell, Magnus

    2015-01-01

    The automotive industry is facing big challenges in meeting the future environmental demands. To be able to meet these demands reduced vehicle weight is an important part. A thorough investigation was made to better get an idea of which demands the automotive industry makes in the question of lightweight materials and how far they have come in the matter. This thesis work has been performed on behalf of Oxeon AB to investigate the future for carbon fiber thermoplastics in big scale production...

  13. Six Sigma process improvements in automotive parts production

    OpenAIRE

    Soković, M.; D. Pavletić; E. Krulčić

    2006-01-01

    Purpose: of this paper: In the paper is presented a Six Sigma project, undertaken within company for production automotive parts, which deals with identification and reduction of production cost in the deburring process for gravity die-castings and improvement of quality level of produced parts.Design/methodology/approach: The objectives are achieved by application of Six Sigma approach to quality improvement project in automotive industry. The applied Six Sigma approach includes team works t...

  14. Multimedia Systems as Immune System to Improve Automotive Security?

    OpenAIRE

    Dittmann, Jana; Hoppe, Tobias; Vielhauer, Claus

    2013-01-01

    International audience Our motivation is driven by the fact, that security mechanisms often cause additional efforts and costs, and need to be aligned with safety goals - protecting human and environment. Especially in the field of automotive security, producers are seeking cost efficient, environmental-condition-adaptive (robust) and fast approaches, if possible combined with existing concepts reusing resources. Initially, working in automotive security, it was easy to see that a wide var...

  15. Model-based testing design for embedded automotive software

    OpenAIRE

    Mjeda, Anila; McElligott, Pat; Ryan, Kevin; Thiel, Steffen

    2009-01-01

    peer-reviewed The ever increasing complexity of embedded automotive software is not matched by the current development and test processes of automotive embedded software and the latter have become the limiting factor. A model-based software development and testing approach has the potential to reduce software development times, to produce executable specifications very early in the process as well as facilitate automatic code generation. Not surprisingly, the above are regarded as hi...

  16. Reliability Centered Maintenance in Schedule Improvement of Automotive Assembly Industry

    OpenAIRE

    Rizauddin Ramli; Mohammad Nizam Arffin

    2012-01-01

    Problem statement: Today, in many automotive manufacturing companies, maintenance management is an important factor to maintain the plant operation and production equipments. Approach: In this study, we present an implementation of Reliability Centered Maintenance (RCM) practice in one of the automotive manufacturing company in Malaysia. The RCM practice was used to assist the company in focusing their maintenance activities based on the criticalities of the equipments by applying the Failure...

  17. Minimizing interference in automotive radar using digital beamforming

    Science.gov (United States)

    Fischer, C.; Goppelt, M.; Blöcher, H.-L.; Dickmann, J.

    2011-07-01

    Millimetre wave radar is an essential part of automotive safety functions. A high interference tolerance, especially with other radar sensors, is vital. This paper gives an overview of the motivation, the boundary conditions and related activities in the MOSARIM project funded by the European Union and concerned with interference mitigation in automotive radars. Current and planned activities considering Digital Beamforming (DBF) as a method for interference mitigation are presented.

  18. Minimizing interference in automotive radar using digital beamforming

    OpenAIRE

    Fischer, C.; Goppelt, M.; Blöcher, H.-L.; J. Dickmann

    2011-01-01

    Millimetre wave radar is an essential part of automotive safety functions. A high interference tolerance, especially with other radar sensors, is vital. This paper gives an overview of the motivation, the boundary conditions and related activities in the MOSARIM project funded by the European Union and concerned with interference mitigation in automotive radars. Current and planned activities considering Digital Beamforming (DBF) as a method for interference mitigation are p...

  19. Cost and weight effective composite design of automotive body structures

    OpenAIRE

    Mårtensson, Per

    2014-01-01

    The automotive industry stands in front of a great challenge, to decrease its impact on the environment. One important part in succeeding with this is to decrease the structural weight of the body structure and by that the fuel consumption or the required battery power. Carbon fibre composites are by many seen as the only real option when traditional engineering materials are running out of potential for further weight reduction. However, the automotive industry lacks experience working with ...

  20. The Strategic Importance of Supplier Relationships in the Automotive Industry

    OpenAIRE

    Ove Brandes; Staffan Brege; Per-Olof Brehmer

    2013-01-01

    The aim of this paper is to analyse longitudinally the development of purchasing strategies in the automotive industry during the last 20 years. The amplitude of the business cycle during this time frame has been very high and includes periods of financial/automotive crisis as well as high sales and demand. Our empirical data is primarily drawn from a 1990–2010 longitudinal case study of the relationship between automaker Volvo Personal Cars and Autoliv, a supplier of seat belts and airbags, ...

  1. Malmquist producticity index: An application of Turkish automotive industry

    OpenAIRE

    Lorcu, Fatma

    2010-01-01

    Automotive sector is one of the most important sectors which seen as the locomotive of economy, shares a large extent of the each economic crisis experienced in the area. In this study; automotive and supplier industry firms', which place in Istanbul Chamber of Industry's (ICI) 500 large firms, total factor productivities analyzed with Malmquist total factor productivity index. While 14 companies came up in this study that compassed 2003-2007 periods, the numbers of employees, net assets are ...

  2. EFFECTIVE OUTSOURCING THROUGHOUT THE SUPPLY CHAIN IN THE AUTOMOTIVE INDUSTRY

    OpenAIRE

    Liu, Ying

    2010-01-01

    The purpose of this bachelor’s thesis was to find a method of using outsourcing effectively throughout the supply chain in the automotive industry. Through the data collecting and analyzing, this thesis was written totally based on theory. As the automotive industry has been developing, the outsourcing service has become one of the most popular methods to improve the supply chain management. The auto manufacturer and spare parts supplier are the two most important roles in the supply chai...

  3. NEW TRENDS AND CHELLENGES IN AUTOMOTIVE INDUSTRY LOGISTICS OPERATIONS

    OpenAIRE

    Dušan Sabadka

    2015-01-01

    This paper lays out the main features of the global automotive industry and identifies several important trends. Logistics operations (inbound and outbound) in the automotive supply chain are complex and account for large expenses and therefore are segments in the value chainwhere improvements can be made. Better coordination between inbound and outbound logistics contributes to optimising the supply chains, to reducing inventories and to responding to consumer requests. As econom...

  4. Integrating plastic recycling industries into the automotive supply chain

    OpenAIRE

    MAUDET-CHARBUILLET, Carole; Bertoluci, Gwenola; FROELICH, Daniel

    2012-01-01

    Chains for recycling the plastics used in the automotive industry are complex systems just emerging. In this paper we propose to explain the reasons which have so far prevented these recycling chains from achieving a sufficiently regulated state to make them reliable partners for automotive manufacturers. On the basis of this, and taking recycling polypropylene as an example, we propose to use a dynamic flow model of this chain to identify the critical parameters on which achieving this regul...

  5. The Indian Automotive Industry and the ASEAN Supply Chain Relations

    OpenAIRE

    Agustin, Tristan Leo Dallo; Schroder, Martin

    2015-01-01

    The topic of automotive supply chains has been increasingly studied as it raises questions of economic development, especially from the perspectives of simultaneous globalisation and regionalisation, and trade. While ASEAN is a prime example of intraregional production networks, supply chains that connect ASEAN and India have not been studied indepth. Therefore, this paper investigates the Indian automotive industry, which is composed of automobile original equipment manufacturers (OEMs) and ...

  6. Supply Chain Risks and Uncertainty in the Automotive Industry

    OpenAIRE

    Lin, Sung-Chieh

    2012-01-01

    The aim of this research is to identify supply chain risks and uncertainty in automotive companies and the strategies that can be applied to help automotive companies mitigate risks and uncertainty. The case study method is applied in this research and the approach to progress data collection is through interviews. The case companies chosen for interviews are one automobile manufacturer and two parts suppliers in Taiwan. From the analysis of data collected, factors that cause supply chain ris...

  7. Developing Dependable Automotive Embedded Systems using the EAST-ADL

    OpenAIRE

    Chen, DeJiu; Johansson, Rolf; Lönn, Henrik; Törngren, Martin

    2007-01-01

    The complexity of embedded automotive systemscalls for a more rigorous approach to systemdevelopment compared to current state of practice. Acritical issue is the management of the engineeringinformation that defines the embedded system. TheEAST-ADL1 is an architecture description languagefor automotive embedded systems. The languageemphasizes information management as a basis forsystematic design and verification. It is currently beingrefined in the ATESST2 project.

  8. New trends for pyrotechnic automotive safety in the European union

    OpenAIRE

    Aufauvre, Lionel

    2006-01-01

    In the European Union (EU) pyrotechnic articles are subjected to comply with national regulations in addition to a series of EU Directives. In order to harmonize regulations in the EU, the placing on the market of pyrotechnic articles is going to fall under the scope of a new European Directive. Among these articles, one finds pyrotechnic components of automotive safety equipment such as gas generators or igniters. In the very fast growing market of automotive safety industry, regulations mig...

  9. Global Production Sharing in the Australian Automotive Trade

    OpenAIRE

    Kishor Sharma

    2012-01-01

    This paper contributes to the literature on global production sharing by investigating the experience of the Australian automotive industry, which has experienced significant structural change following trade liberalisation. Our analysis indicates that the globalisation of the world economy, together with developments in transport and communication, has significantly increased the importance of the global production network in the Australian automotive industry, leading to a substantial rise ...

  10. Analyzing competitiveness of automotive industry through cumulative belief degrees

    OpenAIRE

    Kabak, Özgür; Ülengin, Füsun; Önsel, Şule; Özaydin, Özay; Aktaş, Emel

    2012-01-01

    Copyright @ 2012 The European Mathematical Society This study aims to analyze the automotive industry from competitiveness perspective using a novel cumulative belief degrees (CBD) approach. For this purpose, a mathematical model based on CBD is proposed to quantify the relations among the variables in a system. This model is used to analyze the Turkish Automotive Industry through scenario analysis. This research is supported by SEDEFED (Federation of Industrial Associations), REF (TÜSİ...

  11. Improving plastic waste management system in the automotive industry

    OpenAIRE

    Kashenko, Yuliya

    2013-01-01

    The main goals of the thesis were defined as the analysis of the environmental impact of the automotive company in the field of waste management and developing proposals for improving plastic waste management system. Current study is concentrated only on plastic waste to make the study results as concrete and achievable as possible. Today, to make lighter weight and more economical vehicles, plastics are replacing many metal components in automotive industry. In order...

  12. Mockup Didatic Set for Students Development in Automotive Electronic

    OpenAIRE

    Fabio Delatore; Felipe Serafim Albaladejo; Carlos Alberto Morioka; Alexsander Tressino de Carvalho; Fabrizio Leonardi

    2013-01-01

    The automotive engineering education area, specifically on internal combustion engine, requires the use of suitable systems, capable to simulate, test and obtain specifics data from its operation. Automotive engines are so complex due to it is a mix of engineering subjects, so, a mockup was created to help its study. The mockup is an exactly the same engine that equips a vehicle, but assembled in a mechanical base, equipped with all the necessary components for running it up. The objective of...

  13. Surface topography characterization of automotive cylinder liner surfaces using fractal methods

    Science.gov (United States)

    Lawrence K, Deepak; Ramamoorthy, B.

    2013-09-01

    This paper explores the use of fractal approaches for the possible characterization of automotive cylinder bore surface topography by employing methods such as differential box counting method, power spectral method and structure function method. Three stage plateau honing experiments were conducted to manufacture sixteen cylinder liner surfaces with different surface topographies, for the study. The three fractal methods are applied on the image data obtained using a computer vision system and 3-D profile data obtained using vertical scanning white light interferometer from the cylinder liner surfaces. The computed fractal parameters (fractal dimension and topothesy) are compared and correlated with the measured 3-D Abbott-Firestone curve parameters (Sk, Spk, Svk, Sr1 and Sr2) that are currently used for the surface topography characterization cylinder liner surfaces. The analyses of the results indicated that the fractal dimension (D) computed using the vision data as well as 3-D profile data by employing three different fractal methods consistantly showed a negative correlation with the functional surface topographical parameters that represents roughness at peak (Spk),core (Sk) and valley (Svk) regions and positive correlation with the upper bearing area (Sr1) and lower bearing area (Sr2) of the automotive of cylinder bore surface.

  14. Carbon footprint of automotive ignition coil

    Science.gov (United States)

    Chang, Huey-Ling; Chen, Chih-Ming; Sun, Chin-Huang; Lin, Hung-Di

    2015-07-01

    In recent years, environmental issues, such as climate change and global warming due to the excessive development of industry, have attracted increasing attention of citizens worldwide. It is known that CO2 accounts for the largest proportion of greenhouse gases. Therefore, how to reduce CO2 emissions during the life cycle of a product to lessen its impact on environment is an important topic in the industrial society. Furthermore, it is also of great significance to cut down the required energy so as to lower its production costs during the manufacturing process nowadays. This study presents the carbon footprint of an automotive ignition coil and its partial materials are defined to explore their carbon emissions and environmental impact. The model IPCC GWP100a calculates potential global greenhouse effect by converting them into CO2 equivalents. In this way, the overall carbon footprint of an ignition coil can be explored. By using IPCC GWP100a, the results display that the shell has the most carbon emissions. The results can help the industry reduce the carbon emissions of an ignition coil product.

  15. Remanufacturing in automotive industry: Challenges and limitations

    Directory of Open Access Journals (Sweden)

    Paulina Golinska

    2011-10-01

    Full Text Available Purpose: The aim of this paper is to provide the framework for management of reverse flow of materials in automotive industry. The emphasis is placed on the remanufacturing activities. Materials management in such conditions is a real challenge. The cause for this is parallel use of raw materials and reused materials. Such hybrid flows of materials are characterized by increased level of uncertainty connected with amount, quality and timing. Design/methodology/approach: This paper presents a comprehensive review of remanufacturing and traditional manufacturing. The stabilization of reverse flows is crucial for continuity of remanufacturing operations. The simulation model and results are discussed regarding stabilization of the reverse flows. Findings: Authors identify main problems that appear in the area of combining at the production system forward and reverse flows of materials. The agent-based technology is applied for configuration and stabilization of reverse network. Research limitations/implications: Paper is case – oriented. Practical implications: Both logistician and IT researchers might benefit from authors approach. Originality/value: Authors provide an interdisciplinary approach combining operations management, logistics and information technology.

  16. Implementing Automotive Telematics for Fleet Insurance

    Directory of Open Access Journals (Sweden)

    Marika Azzopardi

    2013-12-01

    Full Text Available The advantages of Usage-Based Insurance for automotive covers over conventional rating methods have been discussed in literature for over four decades. Notwithstanding their adoption in insurance markets has been slow. This paper seeks to establish the viability of introducing fleet Telematics-Based Insurance by investigating the perceptions of insurance operators, tracking service providers and corporate fleet owners. At its core, the study involves a SWOT-analysis to appraise Telematics-Based Insurance against conventional premium rating systems. Twenty five key stakeholders in Malta, a country with an insurance industry that represents others in microcosm, were interviewed to develop our analysis. We assert that local insurers have interests in such insurance schemes as enhanced fleet management and monitoring translate into an improved insurance risk. The findings presented here have implications for all stakeholders as we argue that telematics enhance fleet management, TBI improves risk management for insurers and adoption of this technology is dependent on telematics providers increasing the perceived control by insurers over managing this technology.

  17. Acoustics of automotive catalytic converter assemblies

    Science.gov (United States)

    Dickey, Nolan S.; Selamet, Ahmet; Parks, Steve J.; Tallio, Kevin V.; Miazgowicz, Keith D.; Radavich, Paul M.

    2003-10-01

    In an automotive exhaust system, the purpose of the catalytic converter is to reduce pollutant emissions. However, catalytic converters also affect the engine and exhaust system breathing characteristics; they increase backpressure, affect exhaust system acoustic characteristics, and contribute to exhaust manifold tuning. Thus, radiated sound models should include catalytic converters since they can affect both the source characteristics and the exhaust system acoustic behavior. A typical catalytic converter assembly employs a ceramic substrate to carry the catalytically active noble metals. The substrate has numerous parallel tubes and is mounted in a housing with swelling mat or wire mesh around its periphery. Seals at the ends of the substrate can be used to help force flow through the substrate and/or protect the mat material. Typically, catalytic converter studies only consider sound propagation in the small capillary tubes of the substrate. Investigations of the acoustic characteristics of entire catalytic converter assemblies (housing, substrate, seals, and mat) do not appear to be available. This work experimentally investigates the acoustic behavior of catalytic converter assemblies and the contributions of the separate components to sound attenuation. Experimental findings are interpreted with respect to available techniques for modeling sound propagation in ceramic substrates.

  18. Flywheel Energy Storage for Automotive Applications

    Directory of Open Access Journals (Sweden)

    Magnus Hedlund

    2015-09-01

    Full Text Available A review of flywheel energy storage technology was made, with a special focus on the progress in automotive applications. We found that there are at least 26 university research groups and 27 companies contributing to flywheel technology development. Flywheels are seen to excel in high-power applications, placing them closer in functionality to supercapacitors than to batteries. Examples of flywheels optimized for vehicular applications were found with a specific power of 5.5 kW/kg and a specific energy of 3.5 Wh/kg. Another flywheel system had 3.15 kW/kg and 6.4 Wh/kg, which can be compared to a state-of-the-art supercapacitor vehicular system with 1.7 kW/kg and 2.3 Wh/kg, respectively. Flywheel energy storage is reaching maturity, with 500 flywheel power buffer systems being deployed for London buses (resulting in fuel savings of over 20%, 400 flywheels in operation for grid frequency regulation and many hundreds more installed for uninterruptible power supply (UPS applications. The industry estimates the mass-production cost of a specific consumer-car flywheel system to be 2000 USD. For regular cars, this system has been shown to save 35% fuel in the U.S. Federal Test Procedure (FTP drive cycle.

  19. Measuring soot particles from automotive exhaust emissions

    Directory of Open Access Journals (Sweden)

    Andres Hanspeter

    2014-01-01

    Full Text Available The European Metrology Research Programme participating countries and the European Union jointly fund a three year project to address the need of the automotive industry for a metrological sound base for exhaust measurements. The collaborative work on particle emissions involves five European National Metrology Institutes, the Tampere University of Technology, the Joint Research Centre for Energy and Transport and the Leibniz Institute for Tropospheric Research. On one hand, a particle number and size standard for soot particles is aimed for. Eventually this will allow the partners to provide accurate and comparable calibrations of measurement instruments for the type approval of Euro 5b and Euro 6 vehicles. Calibration aerosols of combustion particles, silver and graphite proof partially suitable. Yet, a consensus choice together with instrument manufactures is pending as the aerosol choice considerably affects the number concentration measurement. Furthermore, the consortium issued consistent requirements for novel measuring instruments foreseen to replace today’s opacimeters in regulatory periodic emission controls of soot and compared them with European legislative requirements. Four partners are conducting a metrological validation of prototype measurement instruments. The novel instruments base on light scattering, electrical, ionisation chamber and diffusion charging sensors and will be tested at low and high particle concentrations. Results shall allow manufacturers to further improve their instruments to comply with legal requirements.

  20. Vibration reduction on automotive shafts using piezoceramics

    Science.gov (United States)

    Kunze, Holger; Riedel, Mathias; Schmidt, Knut; Bianchini, Emanuele

    2003-08-01

    This paper reports an experimental study on active vibration reduction for automotive shafts with the use of piezoelectric material. The work focuses on an axle of an Audi A2. The demand in the automobile sector for higher comfort in the vehicle is of a great importance alongside the requirements of lighter weight and low fuel consumption. These requirements are typically in conflict with each other. One solution is the use of intelligent materials instead of viscoelastic materials and proof mass absorbers. These solutions are quite heavy especially at low frequencies. Active vibration control and piezoelectric devices are advantageous in this application due to their low mass to performance ratio. Our research study explores the use of such piezoelectric devices for an axle. In conjunction with electronics it will reduce vibrations in the first natural bending mode of the axle. Laboratory tests simulated the condition present in the road. At first a stationary set up was used, then a simulated disturbance was input at the attachment points of the shaft. Finally, a test with rotating shaft was performed. Piezoelectric devices (custom QuickPacks from ACX, a Division of Cymer) were used as sensors and as actuators to properly control the axle during the different operating conditions. The power consumption of each actuator pair was less than 20W. The work described here details the test setup, the control strategy, the hardware implementation as well as the test results obtained.

  1. Deployment of ERP Systems at Automotive Industries, Security Inspection (Case Study: IRAN KHODRO Automotive Company)

    Science.gov (United States)

    Ali, Hatamirad; Hasan, Mehrjerdi

    Automotive industry and car production process is one of the most complex and large-scale production processes. Today, information technology (IT) and ERP systems incorporates a large portion of production processes. Without any integrated systems such as ERP, the production and supply chain processes will be tangled. The ERP systems, that are last generation of MRP systems, make produce and sale processes of these industries easier and this is the major factor of development of these industries anyhow. Today many of large-scale companies are developing and deploying the ERP systems. The ERP systems facilitate many of organization processes and make organization to increase efficiency. The security is a very important part of the ERP strategy at the organization, Security at the ERP systems, because of integrity and extensive, is more important of local and legacy systems. Disregarding of this point can play a giant role at success or failure of this kind of systems. The IRANKHODRO is the biggest automotive factory in the Middle East with an annual production over 600.000 cars. This paper presents ERP security deployment experience at the "IRANKHODRO Company". Recently, by launching ERP systems, it moved a big step toward more developments.

  2. Evolution of the Automotive Body Coating Process—A Review

    Directory of Open Access Journals (Sweden)

    Nelson K. Akafuah

    2016-06-01

    Full Text Available Automotive coatings and the processes used to coat automobile surfaces exemplify the avant-garde of technologies that are capable of producing durable surfaces, exceeding customers’ expectations of appearance, maximizing efficiency, and meeting environmental regulations. These accomplishments are rooted in 100 years of experience, trial-and-error approaches, technique and technology advancements, and theoretical assessments. Because of advancements directed at understanding the how, why, when, and where of automobile coatings, the progress in controlling droplets and their deposition attributes, and the development of new technologies and paint chemistries, a comprehensive and up-to-date review of automobile coatings and coating technologies was considered to be of value to industrial practitioners and researchers. Overall, the critical performance factors driving the development and use of advanced automotive coatings and coating technologies are (a aesthetic characteristics; (b corrosion protection; (c mass production; (d cost and environmental requirements; and (e appearance and durability. Although the relative importance of each of these factors is debatable, the perfection of any one at the expense of another would be unacceptable. Hence, new developments in automotive coatings are described and discussed in the following review, and then related to improvements in production technologies and paints. Modern automotive coating procedures are also discussed in detail. Finally, an extrapolation into the future of automotive coating is offered with a view of the developments and technologies needed for an increasingly efficient and more sustainable coatings industry.

  3. Advanced Automotive Technologies annual report to Congress, fiscal year 1996

    International Nuclear Information System (INIS)

    This annual report serves to inform the United States Congress on the progress for fiscal year 1996 of programs under the Department of Energy's Office of Advanced Automotive Technologies (OAAT). This document complies with the legislative requirement to report on the implementation of Title III of the Automotive Propulsion Research and Development Act of 1978. Also reported are related activities performed under subsequent relevant legislation without specific reporting requirements. Furthermore, this report serves as a vital means of communication from the Department to all public and private sector participants. Specific requirements that are addressed in this report are: Discussion of how each research and development contract, grant, or project funded under the authority of this Act satisfies the requirements of each subsection; Current comprehensive program definition for implementing Title III; Evaluation of the state of automotive propulsion system research and development in the United States; Number and amount of contracts and grants awarded under Title III; Analysis of the progress made in developing advanced automotive propulsion system technology; and Suggestions for improvements in automotive propulsion system research and development, including recommendations for legislation

  4. Overview of Automotive Core Tools: Applications and Benefits

    Science.gov (United States)

    Doshi, Jigar A.; Desai, Darshak

    2016-06-01

    Continuous improvement of product and process quality is always challenging and creative task in today's era of globalization. Various quality tools are available and used for the same. Some of them are successful and few of them are not. Considering the complexity in the continuous quality improvement (CQI) process various new techniques are being introduced by the industries, as well as proposed by researchers and academia. Lean Manufacturing, Six Sigma, Lean Six Sigma is some of the techniques. In recent years, there are new tools being opted by the industry, especially automotive, called as Automotive Core Tools (ACT). The intention of this paper is to review the applications and benefits along with existing research on Automotive Core Tools with special emphasis on continuous quality improvement. The methodology uses an extensive review of literature through reputed publications—journals, conference proceedings, research thesis, etc. This paper provides an overview of ACT, its enablers, and exertions, how it evolved into sophisticated methodologies and benefits used in organisations. It should be of value to practitioners of Automotive Core Tools and to academics who are interested in how CQI can be achieved using ACT. It needs to be stressed here that this paper is not intended to scorn Automotive Core Tools, rather, its purpose is limited only to provide a balance on the prevailing positive views toward ACT.

  5. Advanced Automotive Technologies annual report to Congress, fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This annual report serves to inform the United States Congress on the progress for fiscal year 1996 of programs under the Department of Energy`s Office of Advanced Automotive Technologies (OAAT). This document complies with the legislative requirement to report on the implementation of Title III of the Automotive Propulsion Research and Development Act of 1978. Also reported are related activities performed under subsequent relevant legislation without specific reporting requirements. Furthermore, this report serves as a vital means of communication from the Department to all public and private sector participants. Specific requirements that are addressed in this report are: Discussion of how each research and development contract, grant, or project funded under the authority of this Act satisfies the requirements of each subsection; Current comprehensive program definition for implementing Title III; Evaluation of the state of automotive propulsion system research and development in the United States; Number and amount of contracts and grants awarded under Title III; Analysis of the progress made in developing advanced automotive propulsion system technology; and Suggestions for improvements in automotive propulsion system research and development, including recommendations for legislation.

  6. Oxidation of automotive primary reference fuels at elevated pressures

    Energy Technology Data Exchange (ETDEWEB)

    Callahan, C V; Curran, H J; Dryer, F L; Pitz, W J; Westbrook, C K

    1999-03-01

    Automotive engine knock limits the maximum operating compression ratio and ultimate thermodynamic efficiency of spark-ignition (SI) engines. In compression-ignition (CI) or diesel cycle engines, the premixed burn phase, which occurs shortly after injection, determines the time it takes for autoignition to occur. In order to improve engine efficiency and to recommend more efficient, cleaner-burning alternative fuels, they must understand the chemical kinetic processes that lead to autoignition in both SI and CI engines. These engines burn large molecular-weight blended fuels, a class to which the primary reference fuels (PRF) n-heptane and iso-octane belong. In this study, experiments were performed under engine like conditions in a high-pressure flow reactor using both the pure PRF fuels and their mixtures in the temperature range 550-880 K and 12.5 atm pressure. These experiments not only provide information on the reactivity of each fuel but also identify the major intermediate products formed during the oxidation process. A detailed chemical kinetic mechanism is used to simulate these experiments, and comparisons of experimentally measured and model predicted profiles for O{sub 2}, CO, CO{sub 2}, H{sub 2}O and temperature rise are presented. Intermediates identified in the flow reactor are compared with those present in the computations, and the kinetic pathways leading to their formation are discussed. In addition, autoignition delay times measured in a shock tube over the temperature range 690-1220 K and at 40 atm pressure were simulated. Good agreement between experiment and simulation was obtained for both the pure fuels and their mixtures. Finally, quantitative values of major intermediates measured in the exhaust gas of a cooperative fuels research engine operating under motored engine conditions are presented together with those predicted by the detailed model.

  7. Investigation of metallurgical coatings for automotive applications

    Science.gov (United States)

    Su, Jun Feng

    Metallurgical coatings have been widely used in the automotive industry from component machining, engine daily running to body decoration due to their high hardness, wear resistance, corrosion resistance and low friction coefficient. With high demands in energy saving, weight reduction and limiting environmental impact, the use of new materials such as light Aluminum/magnesium alloys with high strength-weight ratio for engine block and advanced high-strength steel (AHSS) with better performance in crash energy management for die stamping, are increasing. However, challenges are emerging when these new materials are applied such as the wear of the relative soft light alloys and machining tools for hard AHSS. The protective metallurgical coatings are the best option to profit from these new materials' advantages without altering largely in mass production equipments, machinery, tools and human labor. In this dissertation, a plasma electrolytic oxidation (PEO) coating processing on aluminum alloys was introduced in engine cylinder bores to resist wear and corrosion. The tribological behavior of the PEO coatings under boundary and starve lubrication conditions was studied experimentally and numerically for the first time. Experimental results of the PEO coating demonstrated prominent wear resistance and low friction, taking into account the extreme working conditions. The numerical elastohydrodynamic lubrication (EHL) and asperity contact based tribological study also showed a promising approach on designing low friction and high wear resistant PEO coatings. Other than the fabrication of the new coatings, a novel coating evaluation methodology, namely, inclined impact sliding tester was presented in the second part of this dissertation. This methodology has been developed and applied in testing and analyzing physical vapor deposition (PVD)/ chemical vapor deposition (CVD)/PEO coatings. Failure mechanisms of these common metallurgical hard coatings were systematically

  8. Applicability valuation for evaluation of surface deflection in automotive outer panels

    Directory of Open Access Journals (Sweden)

    D.H. Park

    2008-12-01

    Full Text Available Purpose: Upon unloading in a forming process there is elastic recovery, which is the release of the elasticstrains and the redistribution of the residual stresses through the thickness direction, thus producing surfacedeflection. It causes changes in shape and dimensions that can create major problem in the external appearanceof outer panels. Thus surface deflection prediction is an important issue in sheet metal forming industry. Manyfactors could affect surface deflection in the process, such as material variations in mechanical properties, sheetthickness, tool geometry, processing parameters and lubricant condition.Design/methodology/approach: Numerical simulation of process was performed by the use of finite elementmethod, paying attention particularly to the thickness distribution and surface deflection of the drawn outerpanel and the outline flange during forming. Simulation procedures of automotive outer panel as large size shapeare as follows; 1 Acquisition of drawing parts 2 Laser scanning for generating CAD model 3 CAD modelgeneration 4 Simulation model operation 5 Simulation execution and analyses of simulation results.Findings: The development of automation in stamping and assembly processes of automobile manufacture willrequire an excellent surface quality of formed panels and also their accurate dimensions.Practical implications: The use of high strength steel sheets in the manufacturing of automobile outer panels hasincreased in the automotive industry over the years because of its lightweight and fuel-efficient improvement.But one of the major concerns of stamping is surface deflection in the formed outer panels. Hence, to be costeffective, accurate prediction must be made of its formability. The automotive industry places rigid constraintson final shape and dimensional tolerances as well as external appearance quality of outer panels. The numericalsimulation makes it possible to design and optimize the total process to a level

  9. Materials Challenges for Automotive PEM Fuel Cells

    Science.gov (United States)

    Gasteiger, Hubert

    2004-03-01

    Over the past few years, significant R efforts aimed at meeting the challenging cost and performance targets required for the use of Polymer Electrolyte Membrane (PEM) fuel cells in automotive applications. Besides engineering advances in bipolar plate materials and design, the optimization of membrane-electrode assemblies (MEAs) was an important enabler in reducing the cost and performance gaps towards commercial viability for the automotive market. On the one hand, platinum loadings were reduced from several mgPt/cm2MEA [1] to values of 0.5-0.6 mgPt/cm2MEA in current applications and loadings as low as 0.25 mgPt/cm2MEA have been demonstrated on the research level [2]. On the other hand, implementation of thin membranes (20-30 micrometer) [3, 4] as well as improvements in diffusion medium materials, essentially doubled the achievable power density of MEAs to ca. 0.9 W/cm2MEA (at 0.65 V) [5], thereby not only reducing the size of a PEMFC fuel cell system, but also reducing its overall materials cost (controlled to a large extent by membrane and Pt-catalyst cost). While this demonstrated a clear path towards automotive applications, a renewed focus of R efforts is now required to develop materials and fundamental materials understanding to assure long-term durability of PEM fuel cells. This presentation therefore will discuss the state-of-the-art knowledge of catalyst, catalyst-support, and membrane degradation mechanisms. In the area of Pt-catalysts, experience with phosphoric acid fuel cells (PAFCs) has shown that platinum sintering leads to long-term performance losses [6]. While this is less critical at the lower PEMFC operating temperatures (200C), very little is known about the dependence of Pt-sintering on temperature, cell voltage, and catalyst type (i.e., Pt versus Pt-alloys) and will be discussed here. Similarly, carbon-support corrosion can contribute significantly to voltage degradation in PAFCs [7], and even in the PEMFC environment more corrosion

  10. Supplier–customer relationships: Weaknesses in south african automotive supply chains

    OpenAIRE

    M. J. Naude; J. A. Badenhorst-Weiss

    2012-01-01

    The South African automotive industry, which is an important sector in the South African economy, needs to function efficiently if it is to compete internationally. However, South African automotive components manufacturers (ACMs) are not internationally competitive and automotive assemblers, also known as original equipment manufacturers (OEMs), often import cheaper components from abroad. All parties in the South African automotive supply chains need each other to ensure optimal efficiency ...

  11. Foreign Direct Investment and Restructuring in the Automotive Industry in Central and East Europe

    OpenAIRE

    Radosevic, S; Rozeik, A.

    2005-01-01

    This paper reviews and explores the major effects of FDI on industry restructuring of the CEE automotive industry. In particular, we are interested if automotive companies have exploited the value creation potential of CEE? Which factors explain the scale and depth of automotive industry restructuring in CEE? What are the economic effects of restructuring the automotive industry in terms of employment, trade and technology? What has been the role of national and EU policies in shaping FDI and...

  12. OASIS: An automotive analysis and safety engineering instrument

    International Nuclear Information System (INIS)

    In this paper, we describe a novel software tool named OASIS (AutOmotive Analysis and Safety EngIneering InStrument). OASIS supports automotive safety engineering with features allowing the creation of consistent and complete work products and to simplify and automate workflow steps from early analysis through system development to software development. More precisely, it provides support for (a) model creation and reuse, (b) analysis and documentation and (c) configuration and code generation. We present OASIS as a part of a tool chain supporting the application of a safety engineering workflow aligned with the automotive safety standard ISO 26262. In particular, we focus on OASIS' (1) support for property checking and model correction as well as its (2) support for fault tree generation and FMEA (Failure Modes and Effects Analysis) table generation. Finally, based on the case study of hybrid electric vehicle development, we demonstrate that (1) and (2) are able to strongly support FTA (Fault Tree Analysis) and FMEA

  13. Multifunctional Materials Used in Automotive Industry: A Critical Review

    Science.gov (United States)

    Salonitis, Konstantinos; Pandremenos, John; Paralikas, John; Chryssolouris, George

    Nowadays, advanced materials and related processes in the automotive industry, are more widely used, leading to an effort towards reducing weight and fuel consumption. The use of such advanced materials and technologies tends to increase the cost. Multifunctional materials (MFMs) and related processing technologies aim at overcoming this increase of cost by exploiting the high level of functional integration. MFMs are designed so as to meet specific requirements through tailored properties. The use of such materials, in the automotive body construction, can help reduce produced parts, lightweight design, high level of integration of functionalities, advancements in mechanical properties of structures etc. In the current study, there is a clear definition of MFMs, and a critical view of such materials used both in the automotive body construction and in other industrial applications.

  14. Financial Crises and Automotive Industry Development in Southeast Asia

    DEFF Research Database (Denmark)

    Doner, Richard F.; Wad, Peter

    2014-01-01

    The automotive industries of Southeast Asia have grown significantly but unevenly. Thailand has outperformed its neighbours in Malaysia, Indonesia and the Philippines with regard to production and, most notably, export volumes. But the Thai auto industry has not exhibited the level of local...... (indigenous) technology capacity and input growth seen in South Korea, Taiwan and, increasingly, in China. The 1997–98 and 2008 financial and economic crises generally reinforced pre-existing national automotive strategies, but to different degrees: They strongly accelerated an earlier Thai move to exports...... whose very success weakened pressures for upgrading; encouraged more moderate automotive liberalisation in Indonesia and, to a lesser extent, in the Philippines; but promoted only minimal changes to Malaysia’s relatively protectionist national car strategy. The fact that the crises served more to...

  15. Identifying Lead Markets in the European Automotive Industry

    DEFF Research Database (Denmark)

    Cleff, Thomas; Grimpe, Christoph; Rammer, Christian

    2015-01-01

    This paper presents an indicator-based methodology to identify lead markets in the European automotive industry. The lead market approach tries to explain why certain countries are better positioned than others for developing and launching new products. While much research stresses the role of...... design. We use an indicator-based approach which has been successfully employed for individual products as well as for various industries in order to identify lead markets in the European automotive industry. Employing five lead market factors, our results show that the EU is by far no homogeneous market...... for automobiles and national markets differ considerably in their lead market potential. The German market is found to be most promising to serve as a lead market, while other European countries with a strong automotive tradition like France, Italy, the UK, and Sweden score lower. Our findings suggest...

  16. Environmental management and operational performance in automotive companies in Brazil

    DEFF Research Database (Denmark)

    Jabbour, C.J.C.; De Sousa Jabbour, A.B.L.; Govindan, Kannan;

    2013-01-01

    The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual...... framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected...... originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved....

  17. Aerodynamic Study about an Automotive Vehicle with Capacity for Only One Occupan

    Directory of Open Access Journals (Sweden)

    Almeida R.A

    2016-04-01

    Full Text Available The presented study describes the aerodynamic behavior of a compact, single occupant, automotive vehicle. To optimize the aerodynamic characteristics of this vehicle, a flow dynamics study was conducted using a virtual model. The outer surfaces of the vehicle body were designed using Computer Aided Design (CAD tools and its aerodynamic performance simulated virtually using Computational Fluid Dynamics (CFD software. Parameters such as pressure coefficient (Cp, coefficient of friction (Cf and graphical analysis of the streamlines were used to understand the flow dynamics and propose recommendations aimed at improving the coefficient of drag (Cd. The identification of interaction points between the fluid and the flow structure was the primary focus of study to develop these propositions. The study of phenomena linked to the characteristics of the model presented here, allowed the identification of design features that should be avoided to generate improved aerodynamic performance

  18. Reliability and availability analysis for robot subsystem in automotive assembly plant: a case study

    Science.gov (United States)

    Fudzin, A. F.; Majid, M. A. A.

    2015-12-01

    The automotive assembly plant in a manufacturing environment consists of conveying systems and robots. Robots with high reliability will ensure no interruption during production. This study is to analyze the individual robot reliability compared to reliability of robots subsystem in series configuration. Availability was computed based on individual robots breakdown data. Failures due to robots breakdown often occurred during the operations. Actual maintenance data for a period of seven years were used for the analysis. Incorporation of failures rate and mean time between failures yield the reliability computation with the assumption of constant failure rate. Result from the analysis based on 5000 operating hours indicated reliability of series configuration of robots in a subsystem decreased to 2.8% in comparison to 38% reliability of the individual robot with the lowest reliability. The calculated lowest availability of the robots is 99.41%. The robot with the lowest reliability and availability should be considered for replacement.

  19. Beyond survival: Challenges facing South African automotive component exporters

    Directory of Open Access Journals (Sweden)

    M. J. Naude

    2006-12-01

    Full Text Available Purpose and Objective: The South African automotive component industry faces huge challenges in a very competitive global market. The primary focus of this research article is to determine the challenges facing exporters within this industry with special reference to selected sub-sectors. The challenges are approached from a supply chain perspective only. Problem Investigated: The research problem of this study was to identify these unique challenges and ascertain whether the implementation of a 'philosophy of continuous improvement' could be used as a strategic tool to address the challenges they face in the market. Methodology: This study included a combination of literature review, interviews with managers in the selected sub-groups and questionnaires sent out to determine the challenges facing automotive component exporters. In order to test the content validity and the reliability of the questionnaire, a pilot study was conducted at two organisations that are the main suppliers of automotive filters for passenger vehicles. The non-probability convenience sample technique was used to select the sample and consisted of selected sub-sectors that contribute 64,1% of the total value of automotive component exports in South Africa. Out of twenty-seven questionnaires sent out, twenty (74% response rate were duly completed by the respondents and returned to the researcher. Findings: South Africa faces unique challenges and these are listed and ranked according to priority from most to least important as follows: 1. The reduction of production costs; 2. R/US$ exchange rate effect on the respondent's export sales and profit margin; 3. Exchange rate fluctuations; 4. Threats to the local automotive component market; and 5. Increased competition by way of manufactured imports being sold in the South African market. Value of Research: The study provides recommendations that can be used within the automotive component industry.

  20. 78 FR 70278 - Automotive Trade Mission to New Delhi, Pune and Chennai, India

    Science.gov (United States)

    2013-11-25

    ... International Trade Administration Automotive Trade Mission to New Delhi, Pune and Chennai, India April 24-April... automotive trade mission to India (New Delhi, Pune and Chennai), April 24-30, 2014. The purpose of the mission is to introduce U.S. firms to India's rapidly expanding automotive market. Many global...

  1. 77 FR 29751 - Agency Information Collection Activity Under OMB Review: Automotive Fuel Economy Reports

    Science.gov (United States)

    2012-05-18

    ...: Automotive Fuel Economy Reports AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of... Control Number: 2127-0019. Title: 49 CFR part 537, Automotive Fuel Economy Reports. Type of Review... information collected provides NHTSA with advance indication whether automotive manufacturers are...

  2. 76 FR 71313 - U.S. Automotive Parts and Components Business Development Mission to Russia

    Science.gov (United States)

    2011-11-17

    ... International Trade Administration U.S. Automotive Parts and Components Business Development Mission to Russia... Service (CS), is organizing an Automotive Parts and Components Business Development Mission to Russia on... section of companies selling goods and services into the automotive sector, including but not limited...

  3. 38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

    Science.gov (United States)

    2010-07-01

    ... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary...

  4. A Study of the Awareness Level of Electric Vehicle Technology in California Community College Automotive Curriculums.

    Science.gov (United States)

    Keyzer, James

    California automotive technician programs were surveyed regarding their awareness of the impact that mandates of the Clean Air Act would have on their automotive technology programs. A questionnaire was sent to 100 California community colleges with an automotive technology program; 49 usable questionnaires were returned. A possible byproduct of…

  5. 77 FR 34854 - Prevailing Rate Systems; Special Wage Schedules for Nonappropriated Fund Automotive Mechanics

    Science.gov (United States)

    2012-06-12

    ... Schedules for Nonappropriated Fund Automotive Mechanics AGENCY: U.S. Office of Personnel Management. ACTION... fund (NAF) automotive mechanics. These special wage schedules would replace the current commission pay practice covering DOD's NAF automotive mechanics with a flat rate pay system. Implementation of a flat...

  6. Recent Trends of Coated Sheet Steels for Automotive use

    International Nuclear Information System (INIS)

    Recent issues in the automotive industries are, improvement of fuel efficiency according to the worldwide CO2 regulation, passenger safety through enhanced crash worthiness, superior design and cost reduction due to price fluctuation of raw material. To meet these demands, steelmaking companies are developing advanced high strength steel and new process technologies such as hydroforming, TWB(Tailor Welded Blank), hot stamping and so on. In addition, eco-friendly and high corrosion resistant coating technologies are getting more attention to comply with the environmental regulations. In this paper, reviews and prospects of recent coating technologies for automotive use are presented

  7. On Mixed Flow Turbines for Automotive Turbocharger Applications

    OpenAIRE

    Bernhardt Lüddecke; Dietmar Filsinger; Jan Ehrhard

    2012-01-01

    Due to increased demands for improved fuel economy of passenger cars, low-end and part-load performance is of key importance for the design of automotive turbocharger turbines. In an automotive drive cycle, a turbine which can extract more energy at high pressure ratios and lower rotational speeds is desirable. In the literature it is typically found that radial turbines provide peak efficiency at speed ratios of 0.7, but at high pressure ratios and low rotational speeds the blade speed ratio...

  8. Simulation work of fatigue life prediction of rubber automotive components

    International Nuclear Information System (INIS)

    The usage of rubbers has always been so important, especially in automotive industries. Rubbers have a hyper elastic behaviour which is the ability to withstand very large strain without failure. The normal applications for rubbers are used for shock absorption, sound isolation and mounting. In this study, the predictions of fatigue life of an engine mount of rubber automotive components were presented. The finite element analysis was performed to predict the critical part and the strain output were incorporated into fatigue model for prediction. The predicted result shows agreement in term of failure location of rubber mount.

  9. Simulation work of fatigue life prediction of rubber automotive components

    Energy Technology Data Exchange (ETDEWEB)

    Samad, M S A [Automotive Engineering Unit, Institute of Advanced Technology, University Putra Malaysia, 43400, UPM Serdang, Selangor (Malaysia); Ali, Aidy, E-mail: aidy@eng.upm.edu.my [Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM, Serdang Selangor (Malaysia)

    2010-05-15

    The usage of rubbers has always been so important, especially in automotive industries. Rubbers have a hyper elastic behaviour which is the ability to withstand very large strain without failure. The normal applications for rubbers are used for shock absorption, sound isolation and mounting. In this study, the predictions of fatigue life of an engine mount of rubber automotive components were presented. The finite element analysis was performed to predict the critical part and the strain output were incorporated into fatigue model for prediction. The predicted result shows agreement in term of failure location of rubber mount.

  10. NEW TRENDS AND CHELLENGES IN AUTOMOTIVE INDUSTRY LOGISTICS OPERATIONS

    Directory of Open Access Journals (Sweden)

    Dušan Sabadka

    2015-03-01

    Full Text Available This paper lays out the main features of the global automotive industry and identifies several important trends. Logistics operations (inbound and outbound in the automotive supply chain are complex and account for large expenses and therefore are segments in the value chainwhere improvements can be made. Better coordination between inbound and outbound logistics contributes to optimising the supply chains, to reducing inventories and to responding to consumer requests. As economies grow, the competition shifts towards brand image and customisation and here the speed and reliability of logistics operations becomes a critical elements.

  11. The likelihood of lock-in in the automotive market

    OpenAIRE

    2011-01-01

    This thesis studies the automotive market and the competition between the gasoline-fueled internal combustion engine car and a fuel cell-powered hydrogen car. The automotive market exhibits network effects, it gets more and more attractive to drive a certain type of car, the more consumers are driving the same type, for instance a gasoline car. The reason is that when more consumers are driving the same type of car, it gets more attractive for fuel and service stations to become compatible wi...

  12. Towards a Load Balancing Middleware for Automotive Infotainment Systems

    Science.gov (United States)

    Khaluf, Yara; Rettberg, Achim

    In this paper a middleware for distributed automotive systems is developed. The goal of this middleware is to support the load bal- ancing and service optimization in automotive infotainment and entertainment systems. These systems provide navigation, telecommunication, Internet, audio/video and many other services where a kind of dynamic load balancing mechanisms in addition to service quality optimization mechanisms will be applied by the developed middleware in order to improve the system performance and also at the same time improve the quality of services if possible.

  13. DOE Automotive Composite Materials Research: Present and Future Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Warren, C.D.

    1999-08-10

    One method of increasing automotive energy efficiency is through mass reduction of structural components by the incorporation of composite materials. Significant use of glass reinforced polymers as structural components could yield a 20--30% reduction in vehicle weight while the use of carbon fiber reinforced materials could yield a 40--60% reduction in mass. Specific areas of research for lightweighting automotive components are listed, along with research needs for each of these categories: (1) low mass metals; (2) polymer composites; and (3) ceramic materials.

  14. Visualization of the air flow behind the automotive benchmark vent

    Directory of Open Access Journals (Sweden)

    Pech Ondrej

    2015-01-01

    Full Text Available Passenger comfort in cars depends on appropriate function of the cabin HVAC system. A great attention is therefore paid to the effective function of automotive vents and proper formation of the flow behind the ventilation outlet. The article deals with the visualization of air flow from the automotive benchmark vent. The visualization was made for two different shapes of the inlet channel connected to the benchmark vent. The smoke visualization with the laser knife was used. The influence of the shape of the inlet channel to the airflow direction, its enlargement and position of air flow axis were investigated.

  15. Utilization of Durability Criterion to Develop Automotive Components

    DEFF Research Database (Denmark)

    Ricardo, Luiz Carlos Hernandes

    2010-01-01

    Today the automotive companies must reduce the time to development of new products with improvement in performance, durability and low cost reductions where possible. To achieve this goal the carmakers need to improve the design criterion of car systems like body, chassis and suspension components....... This paper will present a review of the techniques used in the automotive industry regarding durability before mentioned systems. The paper will present the procedures to obtain the spectrum loading to use in finite element analysis and the validation in laboratory and proving grounds....

  16. The effect of oxygen storage capacity on the dynamic characteristics of an automotive catalytic converter

    Energy Technology Data Exchange (ETDEWEB)

    Shamim, Tariq [Department of Mechanical Engineering, The University of Michigan-Dearborn, Dearborn, MI 48128-2406 (United States)

    2008-11-15

    Automotive catalytic converters, which are employed to reduce engine exhaust emissions, are subjected to highly transient conditions during a typical driving cycle. These transient conditions arise from changes in driving mode, the hysteresis and flow lags of the feedback control system, and result in fluctuations of air-fuel ratio, exhaust gas flow rates and temperatures. The catalyst performance is also strongly influenced by the oxygen storage capacity. This paper presents a computational investigation of the effect of oxygen storage capacity on the dynamic behavior of an automotive catalytic converter subjected to modulations in exhaust gases. The modulations are generated by forcing the temporal variations in exhaust gases air-fuel ratio, gas flow rates and temperatures. The study employs a single-channel based, one-dimensional, non-adiabatic model. The results show that the imposed modulations cause a significant departure in the catalyst behavior from its steady behavior, and the oxygen storage capacity plays an important role in determining the catalyst's response to the imposed modulations. Modulations and oxygen storage capacity are found to have relatively greater influence on the catalyst's performance near stoichiometric conditions. (author)

  17. Acoustic–Structural Study for the Cabin of an Automotive Vehicle

    Directory of Open Access Journals (Sweden)

    E.J. González–Galván

    2010-01-01

    Full Text Available An acoustic–structural study of a cabin for an automotive vehicle through a new 3D finite element model is presented. This model, which is developed with software ANSYS, has a simple geometrical configuration to provide the uncoupled and coupled acoustic–structural modes of the cabin with computing minimum time. In addition, the model easily obtains the results of interior sound pressure and stress in the cabin caused by a harmonic excitation. The results of the first coupled–system modes are of rigid type and they have frequencies smaller than 5 Hz. However, the main acoustic modes are present for frequencies greater than 87 Hz, with the exception of Helmholtz mode (0 Hz. The highest acoustic pressure (in the range from 2 to 400 Hz is 107.8 dB for a harmonic excitation of 1 N. The structure of the cabin registers a maximum stress of 1.85 MPa to 51 Hz. The model proposed significantly contributes in the evaluation of noise level and stress for an automotive vehicle.

  18. Characterising the experience of interaction: an evaluation of automotive rotary dials.

    Science.gov (United States)

    Wellings, Tom; Pitts, Matthew J; Williams, Mark A

    2012-01-01

    Optimising sensory product qualities is a priority for automotive manufacturers when developing human-machine interfaces, as user experience frameworks consider sensory aesthetics to be a main influencing factor of the overall judgement of product appeal. This empirical study examines whether users' overall judgements of product appeal can be predicted from measures of non-visual aesthetic qualities. Ninety-one UK owners of Supermini segment cars assessed five examples of rotary temperature dials. Factor analysis gave four clear factors common across all samples, of which 'unrefined loudness' and 'positivity/precision' predicted up to 26% variance in the hedonic score; both factors were similarly important in the regression models. Significant differences in appeal were observed between the samples; however, there were no effects due to age or gender. Practitioner Summary: The research shows that the overall appeal of automotive rotary dials is partially predicted by their non-visual aesthetics. These findings are applicable to the design of any products where improving the user experience is a goal, as it demonstrates that user experience models are applicable to product domains other than computing and information technology. PMID:22897607

  19. A Secure Mechanism to Supervise Automotive Sensor Network by Client on Smart Phone

    OpenAIRE

    T R Yashavanth,; Ravi S Malashetty,; V R Udupi

    2013-01-01

    This paper presents a proposal on design of a secure client on smart phone to monitor automotive sensor network. Recently, more and more vehicles, such as BMW X5, are connected from outside via smart phone [3]. From smart phone, users can use the internet resources in automotive. Users can monitor the automotives by using their smart phones. When the automotive is moving or stolen by robber, alert information will be reported to users and users can even brake their automotive via smart phone ...

  20. Environmental Performance and firm strategies in the Dutch automotive sector

    NARCIS (Netherlands)

    van der Vooren, A.; Alkemade, F.; Hekkert, M.P.

    2013-01-01

    This paper explores how automotive firms positioned their portfolio since the introduction of energy labels for cars. Using data on product characteristics of automobiles offered on the Dutch market over the period 2001-2010, we analyse how car manufacturers' product portfolios have changed. Portfol

  1. GATE Center for Automotive Fuel Cell Systems at Virginia Tech

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Douglas [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-09-30

    The Virginia Tech GATE Center for Automotive Fuel Cell Systems (CAFCS) achieved the following objectives in support of the domestic automotive industry: Expanded and updated fuel cell and vehicle technologies education programs; Conducted industry directed research in three thrust areas development and characterization of materials for PEM fuel cells; performance and durability modeling for PEM fuel cells; and fuel cell systems design and optimization, including hybrid and plug-in hybrid fuel cell vehicles; Developed MS and Ph.D. engineers and scientists who are pursuing careers related to fuel cells and automotive applications; Published research results that provide industry with new knowledge which contributes to the advancement of fuel cell and vehicle systems commercialization. With support from the Dept. of Energy, the CAFCS upgraded existing graduate course offerings; introduced a hands-on laboratory component that make use of Virginia Tech's comprehensive laboratory facilities, funded 15 GATE Fellowships over a five year period; and expanded our program of industry interaction to improve student awareness of challenges and opportunities in the automotive industry. GATE Center graduate students have a state-of-the-art research experience preparing them for a career to contribute to the advancement fuel cell and vehicle technologies.

  2. AUTOMOTIVE AND HEAVY-DUTY ENGINE COOLANT RECYCLING BY FILTRATION

    Science.gov (United States)

    This evaluation addresses the product quality, waste reduction and economic issues involved in recycling automotive and heavy-duty engine coolants. he specific recycling units evaluated are a fleet-size unit and a portable unit, both based on the technology of chemical filtration...

  3. Environmental sustainability: plastic's evolving role in the automotive life cycle

    International Nuclear Information System (INIS)

    One method of assessing the sustainability of manufactured products involves performing a life cycle analysis for a product and comparing it to alternative ones, or else examining if individual stages of the product can be modified. LCA applications are being used more extensively, especially in the automotive and related industries. Automotive plastics in particular are being scrutinized with much greater care. Plastic components have replaced metal ones in vehicle manufacturing to improve vehicle fuel efficiency and aesthetics. However, at the end of a vehicle's life, recycling rates for plastic are negligible when compared to those of steel. In order to gain the full environmental benefits of using plastic as a vehicle material, plastics must be recycled at the end of a vehicle's life, especially given their increasing use. While a variety of processes have been developed for the recycling of automotive plastics, the challenges of sorting, processing, and finally recycling a heterogeneous mixture of used plastics have yet to be effectively solved. A preliminary life cycle assessment of a plastic automotive fascia demonstrates the usefulness of this eco-balance technique in evaluating potential improvements to manufacturing and end-of-life processes. Improving the manufacturing process may reduce environmental burdens to a larger extent than just recycling the plastic. (author)

  4. Support and promoter effects in automotive exhaust catalysis

    NARCIS (Netherlands)

    Lepage, M.

    2009-01-01

    Automotive catalysis being a mature technology, it can only be improved by the introduction of new breakthroughs. The ideas generating these technical advances in material science can be found thanks to the synthesis and study of model systems with controlled geometries, compositions, interactions a

  5. Dow Corning photonics: the silicon advantage in automotive photonics

    Science.gov (United States)

    Clapp, Terry V.; Paquet, Rene; Norris, Ann; Pettersen, Babette

    2005-02-01

    The Automotive Market offers several opportunities for Dow Corning to leverage the power of silicon-based materials. Dow Corning Photonics Solutions has a number of developments that may be attractive for the emergent photonics needs in automobiles, building on 40 years of experience as a leading Automotive supplier with a strong foundation of expertise and an extensive product offering- from encapsulents and highly reliable resins, adhesives, insulating materials and other products, ensuring that the advantage of silicones are already well-embedded in Automotive systems, modules and components. The recent development of LED encapsulants of exceptional clarity and stability has extended the potential for Dow Corning"s strength in Photonics to be deployed "in-car". Demonstration of board-level and back-plane solutions utilising siloxane waveguide technology offers new opportunities for systems designers to integrate optical components at low cost on diverse substrates. Coupled with work on simple waveguide technology for sensors and data communications applications this suite of materials and technology offerings is very potent in this sector. The harsh environment under hood and the very extreme thermal range that materials must sustain in vehicles due to both their engine and the climate is an applications specification that defines the siloxane advantage. For these passive optics applications the siloxanes very high clarity at the data-communications wavelengths coupled with extraordinary stability offers significant design advantage. The future development of Head-Up-Displays for instrumentation and data display will offer yet more opportunities to the siloxanes in Automotive Photonics.

  6. Estimation of Kinetic Parameters in an Automotive SCR Catalyst Model

    DEFF Research Database (Denmark)

    Åberg, Andreas; Widd, Anders; Abildskov, Jens;

    2016-01-01

    A challenge during the development of models for simulation of the automotive Selective Catalytic Reduction catalyst is the parameter estimation of the kinetic parameters, which can be time consuming and problematic. The parameter estimation is often carried out on small-scale reactor tests, or p...

  7. ENVIRONMENTALLY SAFE, NO VOC AUTOMOTIVE COATING - PHASE II

    Science.gov (United States)

    The EPA recognizes that volatile organic compounds (VOCs) must be eliminated from automotive coating formulations to improve worker safety and reduce environmental pollution. The phase I project resulted in the production of a polymer-based coating material that was clear, ...

  8. The Progressive Insurance Automotive X PRIZE Education Program

    Energy Technology Data Exchange (ETDEWEB)

    Robyn Ready

    2011-12-31

    The Progressive Insurance Automotive X PRIZE Education Program conducted education and outreach activities and used the competition's technical goals and vehicle demonstrations as a means of attracting students and the public to learn more about advanced vehicle technologies, energy efficiency, climate change, alternative fuels, and the science and math behind efficient vehicle development. The Progressive Insurance Automotive X PRIZE Education Program comprised three integrated components that were designed to educate the general public and create a multi-tiered initiative to engage students and showcase the 21st century skills students will need to compete in our global economy: teamwork, creativity, strong literacy, math and science skills, and innovative thinking. The elements included an Online Experience, a National Student Contest, and in person education events and activites. The project leveraged online connections, strategic partnerships, in-classroom, and beyond-the-classroom initiatives, as well as mainstream media. This education program supported by the U.S. Department of Energy (DOE) also funded the specification of vehicle telemetry and the full development and operation of an interactive online experience that allowed internet users to follow the Progressive Insurance Automotive X PRIZE vehicles as they performed in real-time during the Progressive Insurance Automotive X PRIZE competition events.

  9. Visual bias in subjective assessments of automotive sounds

    DEFF Research Database (Denmark)

    Ellermeier, Wolfgang; Legarth, Søren Vase

    2006-01-01

    In order to evaluate how strong the influence of visual input on sound quality evaluation may be, a naive sample of 20 participants was asked to judge interior automotive sound recordings while simultaneously being exposed to pictures of cars. twenty-two recordings of second-gear acceleration...

  10. Automotive Technology Student Learning Styles and Their Implications for Faculty

    Science.gov (United States)

    Threeton, Mark D.; Walter, Richard A.

    2009-01-01

    In an effort to provide Career and Technical Education (CTE) professionals with additional insight on how to better meet the educational needs of the learner, this study sought to identify the preference for learning of postsecondary automotive technology students. While it might appear logical to naturally classify auto-tech students as primarily…

  11. Examples on cold forged aluminium components in automotive industry

    DEFF Research Database (Denmark)

    Bay, Niels; Kolsgaard, A.

    2000-01-01

    The present paper describes the possibilites of applying cold forging for manufacturing of light weight components in aluminium. A short description of the basic cold forming processes forms the basis for describing the great variety in design of cold forged components. Examples are mainly taken ...... from automotive industry but in a few cases also from other industrial sectors to show the possibilities....

  12. Automotive body panel containing thermally exfoliated graphite oxide

    Science.gov (United States)

    Prud'Homme, Robert K. (Inventor); Aksay, Ilhan A. (Inventor); Adamson, Douglas (Inventor); Abdala, Ahmed (Inventor)

    2011-01-01

    An automotive body panel containing a polymer composite formed of at least one polymer and a modified graphite oxide material, which is a thermally exfoliated graphite oxide with a surface area of from about 300 m.sup.2/g to 2600 m.sup.2/g.

  13. 76 FR 19684 - Automotive Fuel Ratings Certification and Posting

    Science.gov (United States)

    2011-04-08

    ...: Request for Public Comments, 74 FR 9054 (Mar. 2, 2009) (``RPC''). \\2\\ Federal Trade Commission: Automotive Fuel Ratings, Certification and Posting: Notice of Proposed Rulemaking, 75 FR 12470 (Mar. 16, 2010..., Certification and Posting: Final Rule, 44 FR 19160 (Mar. 30, 1979). \\6\\ Federal Trade Commission:...

  14. EVALUATION OF FILTRATION AND DISTILLATION METHODS FOR RECYCLING AUTOMOTIVE COOLANT.

    Science.gov (United States)

    This evaluation addresses the product quality, waste reduction, and economic issues involved in recycling automotive and heavy-duty engine coolants at a New Jersey Department of Transportation garage. The specific recycling units evaluated are based on the technologies of filtrat...

  15. AUTOMOTIVE AND HEAVY-DUTY ENGINE COOLANT RECYCLING BY DISTILLATION

    Science.gov (United States)

    This evaluation addresses the product quality, waste reduction, and economic issues involved in recycling automotive and heavy-duty engine coolants for a facility such as the New Jersey Department of Transportation garage in Ewing, New Jersey. he specific recycling evaluated is b...

  16. Automotive fuels survey. Part 4. Innovations or illusions

    Energy Technology Data Exchange (ETDEWEB)

    Troelstra, W.P.; Van Walwijk, M.; Bueckmann, M. [International Energy Agency Automotive Fuels Information Service IEA/AFIS, c/o Innas, Breda (Netherlands)

    1999-01-01

    Volumes 1 to 3 of the IEA/AFIS Automotive Fuels Survey, address the most well-known automotive fuels and fuel production routes. Less well-known fuels and energy sources that are not used in combustion engines, e.g. electricity, were excluded from these volumes. In this report fuel routes and fuels that have not been addressed in the first volumes will be analysed. In this report, each chapter starts with a short description of the fuel(route) and its status of development (e.g. if the idea has been abandoned or if the fuel is already sold at a fuel station). Then the different aspects of that fuel are described as far as the information is available. This is limited to information that can not be found in volumes one and two of the Automotive Fuels Survey. For example: for the diesel-water mixtures, the production of diesel is not be described. If comparisons are made, they are made either relative to an already described fuel(route) that is related (e.g. biogas will be compared with natural gas) or relative to diesel and gasoline as was done in volume 1 and 2 of the Automotive Fuels Survey. For some of the fuels, the relation with a fuel already covered in volume one and two is very strong. For these fuels more information can be found in the chapters on the related fuel in the other volumes of the Automotive Fuels Survey. The following fuels are covered in this report: biodiesel from used oil and fat, biodiesel and biogasoline from algae, diesel from hydrothermal upgrading, biogas, hythane, Fischer-Tropsch diesel, diesel-water blends, higher ethers, and electricity. 74 refs.

  17. Automotive fuels survey. Part 4. Innovations or illusions

    International Nuclear Information System (INIS)

    Volumes 1 to 3 of the IEA/AFIS Automotive Fuels Survey, address the most well-known automotive fuels and fuel production routes. Less well-known fuels and energy sources that are not used in combustion engines, e.g. electricity, were excluded from these volumes. In this report fuel routes and fuels that have not been addressed in the first volumes will be analysed. In this report, each chapter starts with a short description of the fuel(route) and its status of development (e.g. if the idea has been abandoned or if the fuel is already sold at a fuel station). Then the different aspects of that fuel are described as far as the information is available. This is limited to information that can not be found in volumes one and two of the Automotive Fuels Survey. For example: for the diesel-water mixtures, the production of diesel is not be described. If comparisons are made, they are made either relative to an already described fuel(route) that is related (e.g. biogas will be compared with natural gas) or relative to diesel and gasoline as was done in volume 1 and 2 of the Automotive Fuels Survey. For some of the fuels, the relation with a fuel already covered in volume one and two is very strong. For these fuels more information can be found in the chapters on the related fuel in the other volumes of the Automotive Fuels Survey. The following fuels are covered in this report: biodiesel from used oil and fat, biodiesel and biogasoline from algae, diesel from hydrothermal upgrading, biogas, hythane, Fischer-Tropsch diesel, diesel-water blends, higher ethers, and electricity. 74 refs

  18. Acoustic response variability in automotive vehicles

    Science.gov (United States)

    Hills, E.; Mace, B. R.; Ferguson, N. S.

    2009-03-01

    A statistical analysis of a series of measurements of the audio-frequency response of a large set of automotive vehicles is presented: a small hatchback model with both a three-door (411 vehicles) and five-door (403 vehicles) derivative and a mid-sized family five-door car (316 vehicles). The sets included vehicles of various specifications, engines, gearboxes, interior trim, wheels and tyres. The tests were performed in a hemianechoic chamber with the temperature and humidity recorded. Two tests were performed on each vehicle and the interior cabin noise measured. In the first, the excitation was acoustically induced by sets of external loudspeakers. In the second test, predominantly structure-borne noise was induced by running the vehicle at a steady speed on a rough roller. For both types of excitation, it is seen that the effects of temperature are small, indicating that manufacturing variability is larger than that due to temperature for the tests conducted. It is also observed that there are no significant outlying vehicles, i.e. there are at most only a few vehicles that consistently have the lowest or highest noise levels over the whole spectrum. For the acoustically excited tests, measured 1/3-octave noise reduction levels typically have a spread of 5 dB or so and the normalised standard deviation of the linear data is typically 0.1 or higher. Regarding the statistical distribution of the linear data, a lognormal distribution is a somewhat better fit than a Gaussian distribution for lower 1/3-octave bands, while the reverse is true at higher frequencies. For the distribution of the overall linear levels, a Gaussian distribution is generally the most representative. As a simple description of the response variability, it is sufficient for this series of measurements to assume that the acoustically induced airborne cabin noise is best described by a Gaussian distribution with a normalised standard deviation between 0.09 and 0.145. There is generally

  19. Effects of anti-recirculation ring on performance of an automotive cooling fan

    International Nuclear Information System (INIS)

    An investigation has been conducted to evaluate the effects of anti-recirculation ring on performance of automotive axial flow cooling fan by CFD simulation. In order to reduce the element size and save computing time, periodic boundary condition and single flow channel has been applied to the simulation. The grid is composed of tetrahedral mesh and hexahedral mesh. The SST k − ω turbulence model and standard wall function method have been used. CFD results show that optimal design of pressure loss anti-recirculation ring can not only increase P-Q performance and aerodynamic efficiency, but also can improve the pressure distribution on fan tip which can reduce the axial deformation of cooling fan. So it can be proved that good design of anti-recirculation ring will not increase the total axial size of an axial cooling fan

  20. Evaluation of Performance and Opportunities for Improvements in Automotive Power Electronics Systems: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Gilberto; Bennion, Kevin; King, Charles; Narumanchi, Sreekant

    2016-06-14

    Thermal management strategies for automotive power electronic systems have evolved over time to reduce system cost and to improve reliability and thermal performance. In this study, we characterized the power electronic thermal management systems of two electric-drive vehicles--the 2012 Nissan LEAF and 2014 Honda Accord Hybrid. Tests were conducted to measure the insulated-gate bipolar transistor-to-coolant thermal resistances for both steady-state and transient conditions at various coolant flow rates. Water-ethylene glycol at a temperature of 65 degrees C was used as the coolant for these experiments. Computational fluid dynamics and finite element analysis models of the vehicle's power electronics thermal management system were then created and validated using experimentally obtained results. Results indicate that the Accord module provides lower steady-state thermal resistance as compared with the LEAF module. However, the LEAF design may provide improved performance in transient conditions and may have cost benefits.

  1. Effects of anti-recirculation ring on performance of an automotive cooling fan

    Science.gov (United States)

    Chen, Q. G.; Zhang, Y. C.; Li, F.; Kong, X. Z.; Luan, X. H.

    2013-12-01

    An investigation has been conducted to evaluate the effects of anti-recirculation ring on performance of automotive axial flow cooling fan by CFD simulation. In order to reduce the element size and save computing time, periodic boundary condition and single flow channel has been applied to the simulation. The grid is composed of tetrahedral mesh and hexahedral mesh. The SST k - ω turbulence model and standard wall function method have been used. CFD results show that optimal design of pressure loss anti-recirculation ring can not only increase P-Q performance and aerodynamic efficiency, but also can improve the pressure distribution on fan tip which can reduce the axial deformation of cooling fan. So it can be proved that good design of anti-recirculation ring will not increase the total axial size of an axial cooling fan.

  2. Computer-Aided Parts Estimation

    OpenAIRE

    Cunningham, Adam; Smart, Robert

    1993-01-01

    In 1991, Ford Motor Company began deployment of CAPE (computer-aided parts estimating system), a highly advanced knowledge-based system designed to generate, evaluate, and cost automotive part manufacturing plans. cape is engineered on an innovative, extensible, declarative process-planning and estimating knowledge representation language, which underpins the cape kernel architecture. Many manufacturing processes have been modeled to date, but eventually every significant process in motor veh...

  3. Suitability of Alternative Lubricants for Automotive Gear Applications

    Directory of Open Access Journals (Sweden)

    Amit Suhane

    2014-03-01

    Full Text Available Rising environmental concerns due to the problems associated with conventional mineral lubricants has renewed interest in usage of alternative resources. Various attempts have been made to explore the possibilities of utilizing vegetable oils for range of applications. Properties like excellent viscosity features, higher biodegradability, lower toxicity, better renewability & natural lubricity etc shows its potential as lubricants inspite of certain technical problems. Critical issues like lower oxidation stability , poor cold temperature properties affects the performance of vegetable oils and restricts its application to limited range . Gear oils are the hidden workhorses of automotive applications. This article highlights the suitability of various vegetable oils for lubricant formulation as an alternative in automotive gearing applications.

  4. Impact of novel thermoelectric materials on automotive applications

    Science.gov (United States)

    Brignone, Mauro; Ziggiotti, Alessandro

    2012-06-01

    Despite the fact that thermoelectric (TE) devices are compact, quiet, rugged, stable and very reliable, thermoelectrics have found only niche applications because they are also inefficient (less that 5% conversion efficiency is typical) and costly. The key to more widespread acceptance of thermoelectric is the development of materials that are capable of higher conversion efficiency, but other fundamental materials parameters play a role not less important to open to large applications and markets. In particular the automotive sector requires low materials density, materials made from widely-available pure elements with very large supply chains, non-toxicity of elements and potential compliance with REACH and RoHS obligations and low raw material cost combined with low manufacturing costs. The impact of novel TE materials on automotive application will be described focusing on promising nano magnesium silicide and skutterudites.

  5. 4th International Conference on Sustainable Automotive Technologies

    CERN Document Server

    Wellnitz, Jörg; Leary, Martin; Koopmans, Lucien

    2012-01-01

    The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australi...

  6. Automotive Technology and Human Factors Research: Past, Present, and Future

    Directory of Open Access Journals (Sweden)

    Motoyuki Akamatsu

    2013-01-01

    Full Text Available This paper reviews the history of automotive technology development and human factors research, largely by decade, since the inception of the automobile. The human factors aspects were classified into primary driving task aspects (controls, displays, and visibility, driver workspace (seating and packaging, vibration, comfort, and climate, driver’s condition (fatigue and impairment, crash injury, advanced driver-assistance systems, external communication access, and driving behavior. For each era, the paper describes the SAE and ISO standards developed, the major organizations and conferences established, the major news stories affecting vehicle safety, and the general social context. The paper ends with a discussion of what can be learned from this historical review and the major issues to be addressed. A major contribution of this paper is more than 180 references that represent the foundation of automotive human factors, which should be considered core knowledge and should be familiar to those in the profession.

  7. Strategies of performance self-monitoring in automotive production.

    Science.gov (United States)

    Faye, Hélène; Falzon, Pierre

    2009-09-01

    Production in the automotive industry, based on assembly line work, is now characterized by lean manufacturing and customization. This results in greater flexibility and increased quality demands, including worker performance self-monitoring. The objectives of this study are to refine the concept of performance self-monitoring and to characterize the strategies developed by operators to achieve it. Data were collected based on the method of individual auto-confrontation, consisting of two steps: eleven assembly-line operators of a French automotive company were individually observed and video-taped while they were working; an interview then allowed each operator to discuss his/her activity based on the video-tape. This study expands the concept of performance self-monitoring by highlighting three types of strategies directly oriented toward quality: prevention, feedback control and control action strategies. PMID:19230859

  8. Adverse effects of the automotive industry on carbon dioxide emissions

    Directory of Open Access Journals (Sweden)

    Mpho Bosupeng

    2016-05-01

    Full Text Available This study aims to determine the effects of the automotive industry on carbon dioxide emissions for the period from 1997 to 2010 for diverse economies, as well as the relationships between carbon dioxide discharges and output. The study applies cointegration and causality tests to validate these associations. The results of the Johansen cointegration test depict long-run associations between the quantity of passenger cars and carbon dioxide emissions in France, Sweden, Spain, Hungary and Japan. In addition, significant relations were observed between output and carbon dioxide discharges in Spain, Canada, India and Japan. Changes in output had substantial impact on emissions in Germany, Canada and India. The results also show that the number of passenger cars influences the magnitude of emissions in multiple economies. In conclusion, the automotive industry has to be considered in policies that aim to reduce carbon dioxide emissions.

  9. REUSE OF AUTOMOTIVE COMPONENTS FROM DISMANTLED END OF LIFE VEHICLES

    Directory of Open Access Journals (Sweden)

    Piotr NOWAKOWSKI

    2013-12-01

    Full Text Available The problem of recycling end of life automotive vehicles is serious worldwide. It is one of the most important streams of waste in developed countries. It has big importance as recycling potential of raw materials content in automotive vehicles is valuable. Different parts and assemblies after dismantling can also be reused in vehicles where replacement of specific component is necessary. Reuse of the components should be taken into consideration in selecting the vehicles dismantling strategy. It also complies with European Union policy concerning end of life vehicles (ELV. In the paper it is presented systematic approach to dismantling strategies including disassembly oriented on further reuse of components. It is focused on decision making and possible benefits calculation from economic and environmental point of view.

  10. Design Analysis of an Automotive Composite Drive Shaft

    Directory of Open Access Journals (Sweden)

    R.A. Hossain

    2010-04-01

    Full Text Available Automotive drive Shaft is a very important components of vehicle. The present paper focuses on the design of such an automotive drive shat by composite materials. Now a days two pieces steel shaft are used as drive shaft. However, the main advantages of the present design is;only one piece of composite drive shat is possible that fulfil allthe requirements of drive shaft. Two different designs are proposed, one is purely from Graphite/Epoxy lamina and other is using Aluminum with Graphite/Epoxy. The basic requirements considered here are torsional strength, torsional buckling and bending natural frequency. An optimum design of the draft shaft is done, which is cheapest and lightest but meets all of the above load requirements. Progressive failure analysis of the selected design is also done.

  11. A Comparative Study on Automotive Brake Testing Standards

    Science.gov (United States)

    Kumbhar, Bhau Kashinath; Patil, Satyajit Ramchandra; Sawant, Suresh Maruti

    2016-06-01

    Performance testing of automotive brakes involves determination of stopping time, distance and deceleration level. Braking performance of an automobile is required to be ensured for various surfaces like dry, wet, concrete, bitumen etc. as well as for prolonged applications. Various brake testing standards are used worldwide to assure vehicle and pedestrian safety. This article presents methodologies used for automotive service brake testing for two wheelers. The main contribution of this work lies in comparative study of three main brake testing standards; viz. Indian Standards, Federal Motor Vehicle Safety Standards and European Economic Commission Standards. This study shall help the policy makers to choose the best criteria out of these three while formulating newer edition of testing standards.

  12. Automotive Gas Turbine Power System-Performance Analysis Code

    Science.gov (United States)

    Juhasz, Albert J.

    1997-01-01

    An open cycle gas turbine numerical modelling code suitable for thermodynamic performance analysis (i.e. thermal efficiency, specific fuel consumption, cycle state points, working fluid flowrates etc.) of automotive and aircraft powerplant applications has been generated at the NASA Lewis Research Center's Power Technology Division. The use this code can be made available to automotive gas turbine preliminary design efforts, either in its present version, or, assuming that resources can be obtained to incorporate empirical models for component weight and packaging volume, in later version that includes the weight-volume estimator feature. The paper contains a brief discussion of the capabilities of the presently operational version of the code, including a listing of input and output parameters and actual sample output listings.

  13. Migration Issues in Modularity for 1st Tier Automotive Suppliers

    Directory of Open Access Journals (Sweden)

    James O’ Kane

    2009-02-01

    Full Text Available This research attempts to explore the challenges and issues which local automotive component suppliers face as they make the transition to cockpit module suppliers. The paper firstly provides a description of modularity and then discusses the changing supplier roles and relationships in modular outsourcing. An exploratory case study approach involving two suppliers and one OEM is then used to investigate these themes and provide some insights into the motivations and implications for local component suppliers becoming cockpit module suppliers. The paper argues that there are a number of key issues facing suppliers and OEMs in their quest for modular production and supply. These relate to local expertise, supplier management, financial risk, and on-site/off-site (proximity operations. This study sheds light on important emerging trends within automotive 1st tier/OEM relationships, in particular issues relating to changing supplier roles.

  14. Economic crisis and the automotive industry in Romania

    Directory of Open Access Journals (Sweden)

    Iosip, A.

    2010-12-01

    Full Text Available The economic crisis has affected many areas but the auto industry is perhaps one of the most affected. Renault, Ford, General Motors, Toyota, Volkswagen, BMW are just some of the big players caught unprepared. Through this paper we propose an analysis of the automotive market in Romania in order to understand the sales decrease of the last two years. At the same time we aimed at understanding the reasons that led to a decrease in car sales, what were the measures taken by the government to stop this phenomenon and how the economic crisis influenced the automotive field in Romania. An objective image of the situation in the automobile market in Romania at this moment also requires an analysis of the marketing environment and the changes it has undergone over time. Last but not least we will try to find a series of measures to re-launch the car market in Romania.

  15. Sustainability and Energy Efficiency in the Automotive Sector

    CERN Document Server

    CERN. Geneva

    2013-01-01

    Since this year there can be no doubt that "sustainability" has become the top issue in the automotive sector. Volkswagen's CEO Prof. Dr. Martin Winterkorn attacked incumbents like BMW Group (so far the "most sustainable car manufacturer" for the 8th consecutive year) or Toyota (producer of the famous "Prius") head-on by boldly stating to become "the most profitable and most sustainable car manufacturer worldwide by 2018" . This announcement clearly shows that "sustainability" and "profitability" no longer are considered as conflicting targets. On the contrary, to Prof. Dr. Winterkorn : "climate protection is a driver for economic growth". To prime discussions, the plenary talk will give a brief overview of the entire range of energy efficiency in the automotive sector: based on the multiple drivers behind energy efficiency, practical examples are presented along the entire life-cycle of cars (R&D, production, usage and recycling). These "cases" include big automobile producers as well as their respectiv...

  16. Mockup Didatic Set for Students Development in Automotive Electronic

    Directory of Open Access Journals (Sweden)

    Fabio Delatore

    2013-05-01

    Full Text Available The automotive engineering education area, specifically on internal combustion engine, requires the use of suitable systems, capable to simulate, test and obtain specifics data from its operation. Automotive engines are so complex due to it is a mix of engineering subjects, so, a mockup was created to help its study. The mockup is an exactly the same engine that equips a vehicle, but assembled in a mechanical base, equipped with all the necessary components for running it up. The objective of this work is to develop a mockup with a suitable Electronic Control Unit (ECU board, in order to obtain the sensors/actuators signals from the engine and control some important engine functions by using an external ECU, so that the students may test their own strategies, compare with the original ECU.

  17. Computational Methods for Crashworthiness

    Science.gov (United States)

    Noor, Ahmed K. (Compiler); Carden, Huey D. (Compiler)

    1993-01-01

    Presentations and discussions from the joint UVA/NASA Workshop on Computational Methods for Crashworthiness held at Langley Research Center on 2-3 Sep. 1992 are included. The presentations addressed activities in the area of impact dynamics. Workshop attendees represented NASA, the Army and Air Force, the Lawrence Livermore and Sandia National Laboratories, the aircraft and automotive industries, and academia. The workshop objectives were to assess the state-of-technology in the numerical simulation of crash and to provide guidelines for future research.

  18. Mixed structures in continuously cooled low-carbon automotive steels

    OpenAIRE

    Khalid, F.; Edmonds, D.

    1993-01-01

    Mixed microstructures have been studied in low- carbon microalloyed steels suitable for automotive applications, after continuous cooling from the hot-rolled condition. Microstructural features such as polygonal ferrite, bainitic and acicular ferrite and microphase constituent are identified using transmission electron microscopy. The influence of these mixed structures on the tensile strength, impact toughness and fracture behaviour is examined. It is found that improvements in impact toughn...

  19. Technology Roadmap for Energy Reduction in Automotive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2008-09-01

    U.S. Department of Energy’s (DOE) Industrial Technologies Program (ITP), in collaboration with the United States Council for Automotive Research LLC (USCAR), hosted a technology roadmap workshop in Troy, Michigan in May 2008. The purpose of the workshop was to explore opportunities for energy reduction, discuss the challenges and barriers that might need to be overcome, and identify priorities for future R&D. The results of the workshop are presented in this report.

  20. Software independence: impact on product development plan in automotive industries

    OpenAIRE

    M. Annarumma; Naddeo, A.; M. Pappalardo

    2006-01-01

    Purpose: Purpose of this paper: Actually, in automotive industries one of the most important activities inproduct design is the evaluation of various events (i.e. crash events) using FEM simulation; in this context,software independence, that means to obtain the same simulation results on the same car-model using differentFEM solvers, will be useful for reducing virtual prototyping time and consequently Time To Market.Design/methodology/approach: Development of a software-indipendence transla...

  1. Software independence: impact on automotive product development process

    OpenAIRE

    M. Pappalardo; Naddeo, A.; M. Annarumma

    2008-01-01

    Purpose: Currently, in automotive industries one of the most important works in product design is the evaluationof crash events using FEM simulation; in this context, software independence, that means to obtain the samesimulation results on the same vehicle-model using different FEM solvers, will be useful for reducing virtualprototyping time and consequently Time To Market.Design/methodology/approach: The carrying out of a software-independence translation methodology is theaim of this work,...

  2. Software Process Improvement and Lifecycle Models in Automotive Industry

    OpenAIRE

    Sabar, Suneel

    2011-01-01

    The quality of a product depends on the quality of the underlying process is a well known fact. Software development organizations have been struggling to decrease their cost, increase their ROI, reduce time-to-market, and enhance the quality of their products. This all depends upon the improvement in the processes they are following inside their organizations. A number of software process improvement models exist in market, e.g., CMMI, SPICE and Automotive SPICE. But before an organization c...

  3. Three levels of the electromagnetic compatibility (emc) in automotive engineering

    OpenAIRE

    Sperling, D.; Körber, B.; Müller, N.

    2004-01-01

    An important quality factor for vehicles is the compliance of the Electromagnetic Compatibility (EMC). This compliance is given both through legal requirements and by voluntary defaults of the automotive manufacturers and suppliers. In this paper, some selected EMC measuring methods will be presented, whereas two of these were recently developed at the EMC research laboratory at the University of Applied Sciences Zwickau in close cooperation with Volkswagen and Audi.

  4. CONTRIBUTIONS TO OPTIMIZE QUALITY COSTS IN THE AUTOMOTIVE INDUSTRY

    OpenAIRE

    Ion Ionescu

    2014-01-01

    The main goal of the research is that one to present a way of organizing the management accounting, so that it allow the calculate of a cost for quality pertinent for each activity and on every product made in the automotive industry entities. We critically analyzed the current system used to determine and track quality costs at the studied entities, in order to emphasize the need of organization and implement a modern management accounting, which allows quality control costs and increase the...

  5. AHAA - agile, hybrid assessment method for automotive, safety critical SMEs

    OpenAIRE

    Mc Caffery, Fergal; Pikkarainen, Minna; Richardson, Ita

    2008-01-01

    Peer-reviewed The need for software is increasingly growing in the automotive industry. Software development projects are, however, often troubled by time and budget overruns, resulting in systems that do not fulfill customer requirements. Both research and industry lack strategies to combine reducing the long software development lifecycles (as required by time-to-market demands) with increasing the quality of the software developed. Software process improvement (SPI) provides the first s...

  6. Influence of Multiharmonics Excitation on Rattle Noise in Automotive Gearboxes

    OpenAIRE

    Kadmiri, Y.; Perret-Liaudet, J; Rigaud, E; Le Bot, A.; Vary, L.

    2011-01-01

    We consider the automotive gearbox rattle noise resulting from vibro-impacts that can occur between the idle gears under excessive velocity fluctuations of the shaft-driving gears imposed by engine torque fluctuation. Even if the rattling phenomenon has no consequence on reliability, it may be particularly annoying for vehicle interior sound quality and acoustic comfort. The main parameters governing such kind of vibrations are the excitation source associated with engine torque fluctuation w...

  7. Offline Analysis of Independent Guarded Assertions in Automotive Integration Testing

    OpenAIRE

    Rodriguez-Navas, Guillermo; Kobetski, Avenir; Sundmark, Daniel; Gustafsson, Thomas

    2015-01-01

    The size and complexity of software in automotive systems have increased steadily over the last decades. Modern vehicles typically contain numerous electrical control units (ECUs), and more and more features require real-time interaction between several dedicated ECUs (e.g., gearbox, brake and engine control units) in order to perform their tasks. Since system safety and reliability must not be adversely affected by this increase in complexity, proper quality assurance is a must. Such quality...

  8. Powder Injection Moulding - An alternative Processing Method for Automotive Items

    OpenAIRE

    Hausnerova, Berenika

    2011-01-01

    Powder injection moulding (PIM) technology represents a challeging production method for automotive items, alternative to machining and investment casting.Rheology could play a role of considerable importance in controlling and optimizing the PIM process and eliminating some critical quality concerns. At present, the potential of rheological models available to describe the peculiarities of the flow behaviour of PIM compounds is rather limited as these models are not established for multiphas...

  9. Automotive HMI design and participatory user involvement: Review and perspectives

    OpenAIRE

    FRANCOIS, Mathilde; Osiurak, François; Fort, Alexandra; CRAVE, Philippe; Navarro, Jordan

    2016-01-01

    Automotive human-machine interface (HMI) design is facing new challenges due to the technological advances of the last decades. The design process has to be adapted in order to address human factors and road safety challenges. It is now widely accepted that user involvement in the HMI design process is valuable. However, the current form of user involvement in industry remains at the stages of concept assessment and usability tests. Moreover, the literature in other fields (e.g. information s...

  10. Cubic Silicon Carbide: a promising material for automotive application

    OpenAIRE

    Attolini, Giovanni; Bosi, Matteo; Rossi, Francesca; Watts, Bernard Enrico; Salviati, Giancarlo

    2008-01-01

    carbide is a material that possesses properties that make it desirable in electronic, structural and sensor applications. As a wide band gap semiconductor it can be used in high power, high temperature electronics and harsh environments. Its hardness, wear resistance, chemical inertness, and thermal conductivity find uses ranging from disc brakes to micron scale sensors and actuators. The automotive industry faces some important challenges since it has obligations to manufacture safe, clean, ...

  11. MARKETING REQUIREMENTS FOR DEVELOP A BRAND IN AUTOMOTIVE INDUSTRY

    OpenAIRE

    Liliana Adela Zima

    2013-01-01

    TAbstract: The Umbrella Brand can be define to be the mother brand which is not usually model specific which houses the family of brands. sis a trustworthy, relevant, and distinctive promise to the consumer. In our case of General Motorâ€(tm)s Europe, Opel /Vauxhall is the Umbrella Brand. To develop and maintain on the automotive market a strong brand there are some marketing and management requirements to applied. This document summarizes the Marketing requirements for the Gamma Monocab prog...

  12. Migration Issues in Modularity for 1st Tier Automotive Suppliers

    OpenAIRE

    James O’ Kane; Robert Trimble

    2009-01-01

    This research attempts to explore the challenges and issues which local automotive component suppliers face as they make the transition to cockpit module suppliers. The paper firstly provides a description of modularity and then discusses the changing supplier roles and relationships in modular outsourcing. An exploratory case study approach involving two suppliers and one OEM is then used to investigate these themes and provide some insights into the motivations and implications for local co...

  13. An RFID implementation in the automotive industry - improving inventory accuracy

    OpenAIRE

    Hellström, Daniel; Wiberg, Mathias

    2010-01-01

    This paper explores and describes the impact of radio frequency identification (RFID) technology on inventory accuracy within a production and assembly plant, and proposes a model for assessing the impact of the technology on inventory accuracy. The empirical investigation, based on case study research, focuses on a RFID implementation at a supplier of bumper and spoiler systems to the automotive industry. The results indicate that RFID ensures that inventory inaccurac...

  14. In Chains? Automotive Suppliers and Their Product Development Activities

    OpenAIRE

    Corswant, F.; Wynstra, Finn; Wetzels, Alex

    2003-01-01

    textabstractA conceptual framework is developed and tested in which supplier downstream position in the supply chain, supplier innovation strategy and customer development commitment are seen as the antecedents of supplier product development activity. Using partial least squares (PLS), we analyze the results of a survey of 161 Swedish automotive suppliers and test a series of nested models to test our hypotheses. We demonstrate that the position of the supplier in the supply chain and its st...

  15. An Empirical Research on Supplier Relationship Management in Automotive Industry

    OpenAIRE

    Narges Imanipour; Mehdi Rahimi; Nasrin Akhondi

    2012-01-01

    Supplier relationship management is an important research field in Supply Chain Management. This paper aims tostudy the existing portfolio models for supplier relationship management then apply Svensson(2000)’s model toclassify buyer-supplier relationship in an Iranian automotive industry supply chain. Finally present a frameworkfor supplier relationship management. Data for this study was collected through two surveys. The current studyanalyzes supplier relationship management in two phases:...

  16. Evolution of Business Interoperability in the Automotive Industry

    OpenAIRE

    Wende, Kristin; Legner, Christine

    2006-01-01

    In recent years, the established roles in the automotive industry have undergone changes: Automakers which have traditionally executed control over the entire value chain are now increasingly focusing on branding and distribution. At the same time, tier-1 suppliers are becoming vehicle integrators. This paper analyses how new forms of cooperation impact the required level of business interoperability. The comparison of two cases, a traditional OEM-supplier relationship and an innovative form ...

  17. Metodika hodnocení dodavatelů v DURA Automotive

    OpenAIRE

    Bednář, Petr

    2014-01-01

    This Bachelor thesis deals with evaluation methodology of suppliers of indirect material and services in a particular company, which operates in the automotive industry. The aim is to create a foundation for evaluating suppliers of indirect material and services for practical use. The theoretical part contains a summary of the theoretical basis of resources and a description of the methods. The practical part contains methods and documents necessary for the evaluation of supplier of indirect ...

  18. Coordinating mecanisms in automotive distribution channel: distinctive elements

    OpenAIRE

    Heloisa Sousa Ribeiro Ferreira; Rosane Lúcia Chicarelli Alcantara

    2011-01-01

    Besides managing its internal activities, the supply chain management has the challenge of coordinating and managing its partners. The references indicate some organizational and management tools that can help in performing those activities, and in this paper, they are called Supply Chain Coordinating Practices. This paper identifies and evaluates the results obtained by applying some coordinating practices o in the Brazilian automotive channel distribution. This article is an exploratory stu...

  19. Beyond survival: Challenges facing South African automotive component exporters

    OpenAIRE

    M. J. Naude; C. O'Neill

    2006-01-01

    Purpose and Objective: The South African automotive component industry faces huge challenges in a very competitive global market. The primary focus of this research article is to determine the challenges facing exporters within this industry with special reference to selected sub-sectors. The challenges are approached from a supply chain perspective only. Problem Investigated: The research problem of this study was to identify these unique challenges and ascertain whether the implement...

  20. Investigation and Modeling of Recrystallization of Cold Rolled Automotive Steels

    Science.gov (United States)

    Zhitelev, P.; Vasilyev, A.; Sokolov, S.; Sokolov, D.; Paligin, R.

    2016-04-01

    Ferrite recrystallization in cold-rolled sheets of automotive steels has been studied using a Geeble 3800 complex. Mathematical models for quantitative description of the process kinetics and prediction of the recrystallized ferrite grain size have been developed. These models enable performing calculations for any arbitrary heating regimes, including those that are used in industrial production practice, and allow taking into account the effects of a fairly wide range variation of the chemical composition of steels.

  1. The evolution of innovation networks : an automotive case study

    OpenAIRE

    Buchmann, Tobias

    2014-01-01

    Competitive pressure forces firms to continuously develop new ideas, invent new technologies and bring new products to the market in order to survive the destructive part of Schumpeterian innovation competition. This holds particularly for the automotive industry in Germany, challenged by firms from emerging markets which are able to offer their products for lower prices. In the competition for new technological solutions, competences and cutting-edge knowledge are success factors. New knowle...

  2. Residual Generation Methods for Fault Diagnosis with Automotive Applications

    OpenAIRE

    Svärd, Carl

    2009-01-01

    The problem of fault diagnosis consists of detecting and isolating faults present in a system. As technical systems become more and more complex and the demands for safety, reliability and environmental friendliness are rising, fault diagnosis is becoming increasingly important. One example is automotive systems, where fault diagnosis is a necessity for low emissions, high safety, high vehicle uptime, and efficient repair and maintenance. One approach to fault diagnosis, providing potentially...

  3. Robust Automotive Positioning: Integration of GPS and Relative Motion Sensors

    OpenAIRE

    Kronander, Jon

    2004-01-01

    Automotive positioning systems relying exclusively on the input from a GPS receiver, which is a line of sight sensor, tend to be sensitive to situations with limited sky visibility. Such situations include: urban environments with tall buildings; inside parking structures; underneath trees; in tunnels and under bridges. In these situations, the system has to rely on integration of relative motion sensors to estimate vehicle position. However, these sensor measurements are generally affected b...

  4. The Use of Speech Recognition Technology in Automotive Applications

    OpenAIRE

    Gellatly, Andrew William

    1997-01-01

    The research objectives were (1) to perform a detailed review of the literature on speech recognition technology and the attentional demands of driving; (2) to develop decision tools that assist designers of in-vehicle systems; (3) to experimentally examine automatic speech recognition (ASR) design parameters, input modalities, and driver ages; and (4) to provide human factors recommendations for the use of speech recognition technology in automotive applicatio...

  5. SUPPLY CHAIN RESILIENCE ANALYSIS: A BRAZILIAN AUTOMOTIVE CASE

    OpenAIRE

    Luiz Felipe Scavarda; Paula Santos Ceryno; Silvio Pires; Katja Klingebiel

    2015-01-01

    Supply chain (SC) resilience and flexibility are important research topics receiving growing attention. However, the academic literature needs empirical studies on SC resilience capable of investigating the inter-organizational components of flexibility along different tiers. Therefore, this paper analyzes the main lack of flexibilities in three Brazilian automotive SCs that limit their resilience and therefore their capacity to better support and meet the demand changes in the marketplace. A...

  6. Evaluation of Variability Concepts for Simulink in the Automotive Domain

    OpenAIRE

    Kolassa, Carsten; Rendel, Holger; Rumpe, Bernhard

    2015-01-01

    Modeling variability in Matlab/Simulink becomes more and more important. We took the two variability modeling concepts already included in Matlab/Simulink and our own one and evaluated them to find out which one is suited best for modeling variability in the automotive domain. We conducted a controlled experiment with developers at Volkswagen AG to decide which concept is preferred by developers and if their preference aligns with measurable performance factors. We found out that all existing...

  7. Dynamic design of automotive systems: Engine mounts and structural joints

    Indian Academy of Sciences (India)

    R Singh

    2000-06-01

    Dynamic design and vibro-acoustic modelling issues for automotive structures are illustrated via two case studies. The first case examines the role performance of passive and adaptive hydraulic engine mounts. In the second, the importance of welded joints and adhesives in vehicle bodies and chassis structures is highlighted via generic 'T' and 'L' beams assemblies. In each case, analytical and experimental results are presented. Unresolved research issues are briefly discussed.

  8. Experimental Study of Castor Oil Based Lubricant for Automotive Applications

    OpenAIRE

    Amit Suhane; R.M.Sarviya

    2014-01-01

    Vegetable oils due to their better natural propertiescan be used as an alternative to reduce the dependency on the conventional lubricants. With the depletion of conventional resources at faster pace, need of hour is to approach the safer alternatives for ensuring the availability of such resources for longer periods with lesser harm to the mankind and sorroundings.This workevaluates the prospects of Castor oil based lubricant for automotive applications in contrast to the ava...

  9. Multicriteria value analysis for polymer composites selection in automotive applications

    OpenAIRE

    Carod de Arriba, Xavier; González Benítez, María Margarita

    2015-01-01

    This study presents a tool for decision making called Multicriteria Value Analysis, used for selection of polymeric materials applied in automotive parts and components. The tool is built from the methodological framework of Analytical Hierarchy Process (AHP), to define a hierarchical structure of criteria based on the concept of value, and then establish the existing preferences among alternatives. Assuming that all possible alternatives should be polymers and composites which...

  10. Investigation of thermal management materials for automotive electronic control units

    International Nuclear Information System (INIS)

    Today's electronics packages are smaller and more powerful than ever before. This leads to ever increasing thermal challenges for the systems designer. The automotive electronic control unit (ECU) package faces the same challenge of thermal management as the industry in general. This is coupled with the latest European Union legislation (Euro 6 standard) which forced the ECU manufacturers to completely re-design their ECU platform with improved hardware and software capability. This will result in increased power densities and therefore, the ability to dissipate heat will be a key factor. A higher thermal conductivity (TC) material for the ECU housing (than the currently used Aluminium) could improve heat dissipation from the ECU. This paper critically reviews the state-of-the-art in thermal management materials which may be applicable to an automotive ECU. This review shows that of the different materials currently available, the Al/SiC composites in particular have very good potential for automotive ECU application. In terms of metal composites processing, the liquid metal infiltration process is recommended as it has a lower processing cost and it also has the ability to produce near net-shape materials.

  11. Japanese automotive transportation sector's impact upon global warming

    International Nuclear Information System (INIS)

    Automobiles are still increasing in number in Japan. If this continues, CO2 emissions in this sector may increase through the first half of the 21st century. Consequently, a study of measures for reducing these CO2 emissions is essential. In this paper, possible automotive technologies, improvements in fuel consumption and the introduction of electric vehicles are discussed. These measures are then evaluated for the Japanese case. Furthermore, market penetration of these technologies is evaluated, using life-cycle cost analysis based on initial cost and annual fuel cost. It is concluded that reducing CO2 emissions to 1995 levels by 2010 is possible. This would require the simultaneous implementation of fuel-consumption improvements and the introduction of electric vehicles. However, automotive consumers would be reluctant to accept these technologies, particularly electric vehicles, because of their high purchase-price and low benefits in terms of operating economy. Acceptance will require financial and institutional support from the public sector in introducing these automotive technologies into the Japanese transportation sector. (author)

  12. Thermal comfort findings: Scenario at Malaysian automotive industry

    Directory of Open Access Journals (Sweden)

    Ismail Ahmad Rasdan

    2013-01-01

    Full Text Available This paper discusses the findings of thermal comfort assessment at Malaysian automotive industry. Nine critical workstations were chosen as subjects for the study in order to determine the thermal comfort among workers at Malaysian automotive industry. The human subjects for the study comprises of the operators from tire receiving, dashboard assembly, drum tester, body assembly, seat assembly, door check assembly, stamping workstation, engine sub assembly and paint shop of the factory. The environmental factors such as Wet Bulb Globe Temperature (WBGT, relative humidity, air velocity, illuminance were measured using BABUC A apparatus and Thermal Comfort Measurement equipment. Through questionnaire survey, the demographic data of subjects and their perceptions on thermal comfort at each workstation were assessed based on ISO Standard 7730 and thermal sensation scale using Predicted Mean Vote (PMV. Then, Predicted Percentage of Dissatisfied (PPD is used to estimate the thermal satisfaction of occupants. The results indicated that most of the workstations of the automotive industry are considered as uncomfortable. Tire receiving station is considered having better working environment compared to other stations with lowest PMV index of 1.09 to 1.41 and PPD of 46%. Meanwhile, the engine sub assembly station and paint shop of assembly are considered the worst thermal environment with the PMV index values ranging between 2.1 to 2.9 and PPD values of 81% to 99%. Therefore, these two workstations are considered not comfortable because the thermal sensation scale is warm and almost hot.

  13. MSc degree in color technology for the automotive sector

    Science.gov (United States)

    Martinez-Verdu, F.; Perales, E.; Chorro, E.; Viqueira, V.; Gilabert, E.

    2014-07-01

    Nowadays, the measurement and management of color quality of the gonio-apparent materials is complex, but highly demanded in many industrial sectors, as automotive, cosmetics, plastics for consumer electronics, printing inks, architectural coatings, etc. It is necessary to control complex instrumentation and to do visual assessments of texture and color differences to get, for instance, a visual harmony in car bodies; and a profound knowledge of physics and chemistry of special-effect pigments for their optical formulation to obtain attractive visual effects in coatings, plastics, etc, combining among them and with solid pigments. From University of Alicante, for the academic year 2013-14, we are organizing the first MSc degree in Color Technology for the Automotive Sector, with a design of contents embracing CIE colorimetry and visual perception, included the AUDI2000 color difference formula, instrumentation and color management software, fundamentals of coatings and plastics in the automotive sector, and, optical formulation of pigments. The MSc syllabus, with 60 ECTS, is designed to be taught in two semesters: from September to February with on classroom theoretical and practical activities, and, from March to June at virtual level, with internships of training in some companies. Therefore, the MSc Thesis would be the performance report during the internship in companies or research institutions. Some multinational companies, both as car makers and coatings and plastics providers, from European and non-European countries have already shown their support and interest in welcoming students for specific training, even some job offers when the first MSc edition finishes.

  14. Framework to Analyse Automotive Interiors with a Focus on Ergonomics

    Directory of Open Access Journals (Sweden)

    Kajaria Nikhil

    2014-04-01

    Full Text Available The small car market in India is increasing by leaps and bounds. The market for small cars now occupies a substantial share of around 70% of the annual car production in India of about one million. The main players in the car market like Tata Motors, Maruti Udyog and Hyundai etc. are fiercely competitive and are trying to outdo each other in terms of design and technology. However, ultimately the focus of a manufacturer is providing customer satisfaction which is driven by comfort and ease of use. Automotive ergonomics is the study of how automotive can be designed better for human use. The human factor aspect of designing automobiles is first considered at the Vehicle Packaging stage. The term Vehicle Packaging comes to use whenever a new model is in the early stage of study. It is a method to safeguard and protect space for the human user and necessary components that make up the vehicle being designed. The improvement in the vehicle ergonomics requires a basic understanding of the problems that arise due to the conventional automotive interior design.

  15. Advantages and challenges of dissimilar materials in automotive lightweight construction

    Science.gov (United States)

    Weberpals, Jan-Philipp; Schmidt, Philipp A.; Böhm, Daniel; Müller, Steffen

    2015-03-01

    The core of future automotive lightweight materials is the joining technology of various material mixes. The type of joining will be essential, particularly in electrified propulsion systems, especially as an improved electrical energy transmission leads to a higher total efficiency of the vehicle. The most evident parts to start the optimization process are the traction battery, the electrical performance modules and the engines. Consequently aluminum plays a very central role for lightweight construction applications. However, the physical-technical requirements of components often require the combination with other materials. Thus the joining of mixed material connections is an essential key technology for many of the current developments, for example in the areas E-Mobility, solar energy and lightweight construction. Due to these advantages mixed material joints are already established in the automotive industry and laser beam remote welding is now a focus technology for mixed material connections. The secret of the laser welding process with mixed materials lies within the different areas of the melting phase diagram depending on the mixing ratio and the cooling down rate. According to that areas with unwanted, prim, intermetallic phases arise in the fusion zone. Therefore, laser welding of mixed material connections can currently only be used with additional filler in the automotive industry.

  16. Automotive Fuels Survey. Part 3. Comparison and selection

    Energy Technology Data Exchange (ETDEWEB)

    Elam, N.; Van Walwijk, M.; Bueckmann, M.; Troelstra, W.P.; Elam, N. [eds.

    1998-01-01

    A method is presented to compare automotive fuels, which enables answering strategic questions. Five comparisons are made, each covering one specific theme: oil dependency in chapter 2 (which fuels enable a considerable reduction of the oil dependency), ease of transition in chapter 3 (comparison of the ease of transition to alternative fuels), local environmental effects of road transport in chapter 4 (which fuels can result in a substantial improvement of local air quality), greenhouse effect in chapter 5 (which fuels can realize a substantial reduction of well to wheel greenhouse gas emissions), and finally, costs in chapter 6 (a comparison of well to wheel costs for all fuels). The fuels compared are gasoline or reformulated gasoline from crude oil, diesel oil and reformulated diesel oil from crude oil, LPG from refineries and associated gas, natural gas, methanol from natural gas or cellulosic material, ethanol from starch rich crops or sugar rich crops or from cellulosic material, biodiesel (esterified oil from oil containing crops), hydrogen from natural gas, biomass or by electrolysis of water, and dimethylether (DME) from natural gas or cellulosic material. In part 1 of the title survey an overview of important aspects of raw materials and their conversion to automotive fuels is presented, while part is concerned with distribution and use of conventional and alternative automotive fuels. figs., tabs., refs.

  17. Application of Electron Beam Surface Technologies in the Automotive Industry

    Institute of Scientific and Technical Information of China (English)

    Rolf Zenker; Anja Buchwalder

    2004-01-01

    Progress in the beam deflection technique opens up new possibilities for the application of electron beam (EB)surface and welding technologies in the automotive industry. This development is based on three-dimensional high-speed beam deflection and fully automatic online process control. So, in the EB surface treatment three-dimensional energy transfer fields can be realised which take into account the contour of a component, the conditions of heat conduction and the load conditions. High flexibility, precision and reproducibility are typical characteristics. High productivity is achieved by the simultaneous interaction of the EB in several processing areas or by carrying out several processes simultaneously. EB surface treatment is becoming more and more attractive and important especially in the automotive industry, and also in comparison to laser technologies. This paper deals with different EB surface technologies, for example hardening,remelting, surface alloying, dispersing or cladding of different materials such as steel, cast iron and different alloys of Al,Mg and Ti. Examples of applications in the automotive industry, especially engine components, will be discussed.

  18. Fast automotive diesel exhaust measurement using quantum cascade lasers

    Science.gov (United States)

    Herbst, J.; Brunner, R.; Lambrecht, A.

    2013-12-01

    Step by step, US and European legislations enforce the further reduction of atmospheric pollution caused by automotive exhaust emissions. This is pushing automotive development worldwide. Fuel efficient diesel engines with SCRtechnology can impede NO2-emission by reduction with NH3 down to the ppm range. To meet the very low emission limits of the Euro6 resp. US NLEV (National Low Emission Vehicle) regulations, automotive manufacturers have to optimize continuously all phases of engine operation and corresponding catalytic converters. Especially nonstationary operation holds a high potential for optimizing gasoline consumption and further reducing of pollutant emissions. Test equipment has to cope with demanding sensitivity and speed requirements. In the past Fraunhofer IPM has developed a fast emission analyzer called DEGAS (Dynamic Exhaust Gas Analyzer System), based on cryogenically cooled lead salt lasers. These systems have been used at Volkswagen AG`s test benches for a decade. Recently, IPM has developed DEGAS-Next which is based on cw quantum cascade lasers and thermoelectrically cooled detectors. The system is capable to measure three gas components (i.e. NO, NO2, NH3) in two channels with a time resolution of 20 ms and 1 ppm detection limits. We shall present test data and a comparison with fast FTIR measurements.

  19. History and evolution of warning labels for automotive friction products.

    Science.gov (United States)

    Kopelovich, Luda M; Thuett, Kerry A; Chapman, Pamela S; Paustenbach, Dennis J

    2014-04-01

    There have been claims over the years that asbestos-containing product manufacturers did not sufficiently warn end users early enough regarding the potential health hazards associated with their products (1930s-1990s). To address this issue, we compared the content of the warnings associated with asbestos-containing friction products (brakes, clutches, and gaskets) manufactured by the US automotive industries to what was expected by regulatory agencies during the time period in which an understanding of asbestos health hazards was being developed. We ended our evaluation around 1990, since asbestos-containing manufacturer supplied automotive products were functionally removed from commerce by 1985 in the United States. We assessed the warnings issued in users' manuals, technical service bulletins, product packaging materials, and labels placed on products themselves. Based on our evaluation, regulatory agencies had no guidelines regarding specific warning language for finished friction products, particularly when a product contained encapsulated asbestos fibers (i.e., modified by a bonding agent). Even today, federal regulations do not require labeling on encapsulated products when, based on professional judgment or sampling, user exposure is not expected to exceed the OSHA PEL. We concluded that, despite limited regulatory guidance, the US automotive industry provided adequate warnings with regards to its friction products. PMID:24518387

  20. The status of ceramic turbine component fabrication and quality assurance relevant to automotive turbine needs

    Energy Technology Data Exchange (ETDEWEB)

    Richerson, D.W.

    2000-02-01

    This report documents a study funded by the U.S. Department of Energy (DOE) Office of Transportation Technologies (OTT) with guidance from the Ceramics Division of the United States Automotive Materials Partnership (USAMP). DOE and the automotive companies have funded extensive development of ceramic materials for automotive gas turbine components, the most recent effort being under the Partnership for a New Generation of Vehicles (PNGV) program.

  1. Business Case for Online Marketing of Automotive Financing for First West Credit Union

    OpenAIRE

    Sidhu, Amerpreet

    2012-01-01

    This project develops user experience and online marketing strategies for the growth of First West Credit Union, the third largest Credit Union in British Columbia. Several recommendations focus on the Automotive Financing Division of First West Credit Union. The project researches user needs in the automotive finance sector, analyzes operational forces and recommends strategies that affect business operations, customer service, online brand awareness and system usability. Automotive dealersh...

  2. Automotive Business with Foreign Capital in Turkey and an Econometrics Application

    OpenAIRE

    Haldun Soydal; Serdar Altınok

    2007-01-01

    In Turkey, among the business with foreign capital which working order automotive sector has an important place. Since automotive business with foreign capital are big companies that can be essential to Turkey's problems in terms of macroeconomics. These businesses are highly profitable for Turkey's economy in terms of employment, manufacture and export. Therefore, automotive business with foreign capital which are important are studied as an empirical study among their income, exchange rate,...

  3. Combined Model Checking and Testing Create Confidence in Correctness of Commercial Automotive Operating System

    OpenAIRE

    Aoki, Toshiaki; Satoh, Makoto; Tani, Mitsuhiro; Yatake, Kenro; Kishi, Tomoji

    2016-01-01

    The safety and reliability of automotive systems are becoming a big concern in our daily life. Recently, a functional safety standard which specializes in automotive systems has been proposed by the ISO. In addition, electrical throttle systems have been inspected by NHTSA and NASA due to the unintended acceleration problems of Toyota’s cars. In light of such recent circumstances, we are researching practical applications of formal methods to ensure the high quality of automotive operating sy...

  4. Model Mix Planning and Assembly Sequencing with SAP : APO Automotive Module

    OpenAIRE

    Nega, Tibebu Berhanu

    2011-01-01

    Effectively applying model mix and assembly sequencing can result in smooth part usage and balanced workloads on the automotive assembly line. I have studied the problem of production planning in automotive industry in terms of scheduling various models on an assembly line using SAP APO over a time horizon. The trends in automotive industry are moving from built to stock to built to order since more customers are demanding cars specific to their requirements. This shift of interest creates a ...

  5. Collaborative Assessment of the Automotive Sales Service Based on Co-Entropy

    OpenAIRE

    Dingfu Jiang; Li Xiong; Yan Yue

    2013-01-01

    Co-entropy function was constructed based on dissipative structure, collaboration and entropy theory, while co-entropy of each management level in automotive sales service and the mathematical quantified assessment model of collaborative efficiency were built. In combination with the collaborative management activity of automotive sales service in an automotive sales company in Shanghai, the model and viewpoints presented here were applied and verified through empirical research.

  6. VISA Final Report: Fully Integrated Power Electronic Systems in Automotive Electronics

    OpenAIRE

    Waffenschmidt, E

    2011-01-01

    This report summarizes the activities related to the public funded project “Vollintegrierte leistungselektronische Systeme in der Automobilelektronik – VISA” (Fully Integrated Power Electronic Systems in Automotive Electronics). Aim of the project is to investigate the integration of components into printed circuit boards (PCB) for automotive power applications. For Philips, this technology is interesting for integrated LED drivers as used e.g. in automotive head lamps. The project is funded ...

  7. Industrial Upgrading in Global Production Networks: The Case of the Chinese Automotive Industry

    OpenAIRE

    Li, Yansheng; Xin Xin KONG; Zhang, Miao

    2015-01-01

    This article examines the development of China’s automotive industry. The evidence shows that integration in global production networks has stimulated upgrading of technological capabilities among automotive firms. However, the competitiveness and intra-industry analyses show mixed results. Although intraindustry trade in automotive products has improved since 2000, the trade competitiveness of completely built up vehicles has largely remained in low value added activities. Nevertheless, firm...

  8. Analyzing Robotic Kinematics Via Computed Simulations

    Science.gov (United States)

    Carnahan, Timothy M.

    1992-01-01

    Computing system assists in evaluation of kinematics of conceptual robot. Displays positions and motions of robotic manipulator within work cell. Also displays interactions between robotic manipulator and other objects. Results of simulation displayed on graphical computer workstation. System includes both off-the-shelf software originally developed for automotive industry and specially developed software. Simulation system also used to design human-equivalent hand, to model optical train in infrared system, and to develop graphical interface for teleoperator simulation system.

  9. Concurrent engineering and DFMA approaches on the development of automotive panels and doors

    Directory of Open Access Journals (Sweden)

    F.Z. Krumenauer

    2008-12-01

    Full Text Available Purpose: The automotive industry, in countries such as Brazil, China and India, in contrast to the NorthAmerican and European markets, is in full expansion. Due to the huge competition in the globalized automotivemarket, such countries face a challenge to continue this expansion. Especially important in order to win thisbattle, will be their capacities to release new products in the market faster than their competitors and with morecost efficiency, making an appropriate use of tools such as total quality management, concurrent engineeringand increasing the use of innovative concepts in production and logistics [1,2].Design/methodology/approach: According with the expose above, the aim of this work was to developDFMA tools for an industrial real case. There several tools that could be included in the Design for Excellence(DFX methodologies. Initially, two of those can be outstand here: Design For Manufacturing (DFMand Design For Asse.Findings: In terms of the press shop facilities of the plant the main results, were: layout optimization, press lineautomation feasibility, reduced setup and increased productivity, improved racks logistic, reduced overhead,reduced stamped part scraps and resources with mechanical presses selling. In terms of the planning activities,the main results were: reduce time to market, reduce press shop machinery and die stamping investments andreduce indirect cost.Practical implications: The main proposal of concurrent engineering is to shorten a product development timethrough a simultaneous time implementation of the several stages of the engineering activity in parallel andunder a concurrent mode offering all information required by all elements of the product life cycle.Originality/value: This paper reviews fundamental concepts in concurrent engineering and DFX aiming todiscuss criteria of assembly and manufacturability regarding the development of automotive panels and doors.A more detailed presentation of the Finite

  10. An application of enhanced 3D-CAD methods with integrated geometry creation algorithms for PVC-seams in automotive body in white design

    Science.gov (United States)

    Frener, Gernot; Thum, Katharina; Hirz, Mario; Harrich, Alexander

    2012-06-01

    State of the art automotive development processes are based on virtual product models, which include a digital representation of complete vehicle geometry and structures. Increasing computation performance and continuously growing demands on virtual development processes lead to the application of precise product representation within common CAD software packages. A specific challenge represents the creation of PVC-seams, which are used for corrosion protection of sheet metal components in automotive body in white design. Besides the high requirements of accurate geometric modeling in digital representation, modern development processes call for an increasing level of design automation. To fit both, the present approach introduces a method for an automatic generation of PVC-seams using the functionalities of commercial CAD software. [Figure not available: see fulltext.

  11. Six Sigma process improvements in automotive parts production

    Directory of Open Access Journals (Sweden)

    M. Soković

    2006-09-01

    Full Text Available Purpose: of this paper: In the paper is presented a Six Sigma project, undertaken within company for production automotive parts, which deals with identification and reduction of production cost in the deburring process for gravity die-castings and improvement of quality level of produced parts.Design/methodology/approach: The objectives are achieved by application of Six Sigma approach to quality improvement project in automotive industry. The applied Six Sigma approach includes team works through several phases: Define, Measure, Analyze, Improve, and Control (DMAIC.Findings: Systematic application of Six Sigma DMAIC tools and methodology within an automotive parts production results with several achievements such are reduction of tools expenses, cost of poor quality and labours expenses.It was shown that Six sigma is an effective way to find out where are the greatest process needs and which are the softest points of the process. Also, Six sigma provide measurable indicators and adequate data for analytical analysis.Research implications: The possibility of application of several Six Sigma tools such are thought process mapping, Pareto diagrams, process mapping, cause and effect matrix, and analysis of variation and capability studies.Practical implications: Improvements through reduced Production time, Control time, Material and Internal scrap have been yield significant financial. Furthermore, this pilot project enabled introduction of Six Sigma methodology in wider range of manufacturer activities.Originality/value: The paper researches the possibility of Six Sigma application within manufacturing process. This paper is of the value to researcher in the field of quality management and quality improvement, as well as to professionals in the manufacturing industry, wherever the quality improvement is an issue.

  12. Toughness of welded stainless steels sheets for automotive industry

    Directory of Open Access Journals (Sweden)

    E. Bayraktar

    2011-01-01

    Full Text Available Purpose: In the automotive industry, more and more it is compulsory to develop new grades of stainless steels, such as high resistant Martensitic Stainless Steels (MA-SS and Ferritic Stainless Steels (FSS in order to realise certain or many complex deep drawn pieces. For these grades, resistance spot welding (RSW is the most widespread process used largely for many parts of the car body in the automotive industry. This paper aims to characterise mechanical behaviour (toughness of the different steel grades under dynamic test conditions.Design/methodology/approach: A special crash test device is used in different temperatures and the simulated crash tests are performed at a constant speed of 5.52 m/s.Findings: The specimen is submitted to impact tensile test at different temperatures. According to testing temperature, fracture mode varies: At low temperatures, brittle fracture occurs: due to stress concentration, fracture always occurs in the notched section. At high temperatures, the specimen fails by ductile fracture. Toughness of the steel sheets (base metals, BM or welded parts is well compared at different materials and test conditions.Research limitations/implications: Evaluation of welded thin sheets submitted to the dynamic loading in order to correlate in real service conditions in order to realize a useful correlation between the transition temperature and deep drawability can be used for evaluating of the welding conditions and also of the material characteristics. For detail study, this type of the test needs a standard formulation.Practical implications: This is a new conception of specimen and of the impact/crash machine. It is widely used in automotive industry for practical and economic reason to give rapid answers to designer and also steel makers for ranking the materials.Originality/value: New developed test called impact crash test for evaluating the toughness of thin welded joints (tailored blanks / mechanical assemblies in

  13. Automotive fuels and internal combustion engines: a chemical perspective.

    Science.gov (United States)

    Wallington, T J; Kaiser, E W; Farrell, J T

    2006-04-01

    Commercial transportation fuels are complex mixtures containing hundreds or thousands of chemical components, whose composition has evolved considerably during the past 100 years. In conjunction with concurrent engine advancements, automotive fuel composition has been fine-tuned to balance efficiency and power demands while minimizing emissions. Pollutant emissions from internal combustion engines (ICE), which arise from non-ideal combustion, have been dramatically reduced in the past four decades. Emissions depend both on the engine operating parameters (e.g. engine temperature, speed, load, A/F ratio, and spark timing) and the fuel. These emissions result from complex processes involving interactions between the fuel and engine parameters. Vehicle emissions are comprised of volatile organic compounds (VOCs), CO, nitrogen oxides (NO(x)), and particulate matter (PM). VOCs and NO(x) form photochemical smog in urban atmospheres, and CO and PM may have adverse health impacts. Engine hardware and operating conditions, after-treatment catalysts, and fuel composition all affect the amount and composition of emissions leaving the vehicle tailpipe. While engine and after-treatment effects are generally larger than fuel effects, engine and after-treatment hardware can require specific fuel properties. Consequently, the best prospects for achieving the highest efficiency and lowest emissions lie with optimizing the entire fuel-engine-after-treatment system. This review provides a chemical perspective on the production, combustion, and environmental aspects of automotive fuels. We hope this review will be of interest to workers in the fields of chemical kinetics, fluid dynamics of reacting flows, atmospheric chemistry, automotive catalysts, fuel science, and governmental regulations. PMID:16565750

  14. Building Competitive Advantages CEIBS Holds the 2004 CEIBS China Automotive Industry Forum

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Second consecutive CEIBS China Automotive Industry Forum was held in Novermber 22 at the school's Shang hai campus. Following last year's success, this year there are more than 200 local and international participants including: auto manufacturers, component suppliers, government officials, industry experts and researchers, who have gathered today to discuss issues in the country's automotive industry.

  15. 75 FR 65514 - Automotive Components Holdings, LLC, A Subsidiary of Ford Motor Company, Saline Plant Division...

    Science.gov (United States)

    2010-10-25

    ..., 2010, and the Notice of Determination was published in the Federal Register on March 12, 2010 (75 FR 11925). The workers produce interior automotive components. The negative determination was based on the... Employment and Training Administration Automotive Components Holdings, LLC, A Subsidiary of Ford...

  16. 75 FR 28303 - Setco Automotive, Inc., Paris, TN; Notice of Revised Determination on Reconsideration

    Science.gov (United States)

    2010-05-20

    ... automotive clutch products produced by the workers' firm was directly incorporated into. The Department's Notice of determination was published in the Federal Register on April 23, 2010 (FR 75 21358). The... Employment and Training Administration Setco Automotive, Inc., Paris, TN; Notice of Revised Determination...

  17. 75 FR 9441 - Lucas-Smith Automotive, Inc.: Potosi, MO; Notice of Negative Determination Regarding Application...

    Science.gov (United States)

    2010-03-02

    ... 16, 2010 (75 FR 7039). Workers of the subject firm are engaged in employment related to the sales and... Employment and Training Administration Lucas-Smith Automotive, Inc.: Potosi, MO; Notice of Negative... Automotive, Inc., Potosi, Missouri (subject firm). The Notice of negative determination was signed on...

  18. 75 FR 38129 - TRW Automotive, Kelsey-Hayes Company, NABS Division, Mt. Vernon, OH; Amended Certification...

    Science.gov (United States)

    2010-07-01

    ..., applicable to workers of TRW Automotive, NABS Division, Mt. Vernon, Ohio. The notice was published in the Federal Register on November 5, 2009 (74 FR 57340). At the request of the State agency, the Department... Employment and Training Administration TRW Automotive, Kelsey-Hayes Company, NABS Division, Mt. Vernon,...

  19. 49 CFR 213.347 - Automotive or railroad crossings at grade.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Automotive or railroad crossings at grade. 213.347 Section 213.347 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Higher § 213.347 Automotive or railroad crossings at grade. (a) There shall be no at-grade...

  20. 75 FR 30900 - Fisker Automotive; Receipt of Application for Temporary Exemption From Advanced Air Bag...

    Science.gov (United States)

    2010-06-02

    ... to Panoz, 72 FR 28759 (May 22, 2007), or grant of petition to Koenigsegg, 72 FR 17608 (April 9, 2007... National Highway Traffic Safety Administration Fisker Automotive; Receipt of Application for Temporary... Protection. SUMMARY: In accordance with the procedures in 49 CFR part 555, Fisker Automotive Corporation...

  1. 77 FR 60672 - Approval for Manufacturing Authority, Foreign-Trade Zone 99, Fisker Automotive, Inc., (Electric...

    Science.gov (United States)

    2012-10-04

    ... given in the Federal Register (77 FR 19000, 3-29-2012) and the application has been processed pursuant... Foreign-Trade Zones Board Approval for Manufacturing Authority, Foreign-Trade Zone 99, Fisker Automotive..., has requested manufacturing authority on behalf of Fisker Automotive, Inc., within FTZ 99--Site...

  2. 75 FR 22628 - Meridian Automotive Systems, Currently Known as Ventra, Ionia, MI; Amended Certification...

    Science.gov (United States)

    2010-04-29

    ... Trade Adjustment Assistance on October 31, 2008, applicable to workers of Meridian Automotive Systems, Ionia, Michigan. The notice was published in the Federal Register on November 13, 2008 (73 FR 67209). At... Employment and Training Administration Meridian Automotive Systems, Currently Known as Ventra, Ionia,...

  3. 77 FR 55898 - Request for Comments on a Renewal of a Previously Approved Information Collection: Automotive...

    Science.gov (United States)

    2012-09-11

    ... soliciting comments on the following information collection was published on May 18, 2012 (77 FR 29751). No... Approved Information Collection: Automotive Fuel Economy Reports ACTION: Notice and request for comments... INFORMATION: Title: 49 CFR Part 537, Automotive Fuel Economy Reports. OMB Control Number: 2127-0019. Type...

  4. 76 FR 27669 - Automotive Components Holdings, LLC, a Subsidiary of Ford Motor Company, Saline Plant Division...

    Science.gov (United States)

    2011-05-12

    ..., 2010 (75 FR 65514). The workers are engaged in employment related to the production of interior... Employment and Training Administration Automotive Components Holdings, LLC, a Subsidiary of Ford Motor... Application for Reconsideration for the workers and former workers of Automotive Components Holdings, LLC,...

  5. An Assessment of Future Employment Opportunities for Individuals Trained in the Automotive Trades. Working Paper.

    Science.gov (United States)

    California State Dept. of Employment Development, Sacramento.

    The California Youth Authority (CYA) planned to offer a training program covering all aspects of the automotive trades to wards during their incarceration. Through analysis, it showed future job opportunities exist, due to increased job numbers and high turnover rate, for persons trained in the automotive trades in California over a 10-year period…

  6. Transnationals, Globalisation and Education and Training: Evidence from the South African Automotive Sector

    Science.gov (United States)

    McGrath, Simon

    2007-01-01

    This study explores the relationships between globalisation and education and training through an examination of certain transnational corporations operating in the automotive sector in South Africa. The automotive industry is an important source of improvements in both the quality and quantity of skills in South Africa. This sector was the…

  7. 77 FR 13350 - Certain Automotive GPS Navigation Systems, Components Thereof, and Products Containing Same...

    Science.gov (United States)

    2012-03-06

    ... complaint filed by Beacon Navigation GmbH of Zug, Switzerland (``Beacon''). 76 FR 72443 (Nov. 23, 2011). The... COMMISSION Certain Automotive GPS Navigation Systems, Components Thereof, and Products Containing Same... importation of certain automotive GPS navigation systems, components thereof, and products containing the...

  8. 75 FR 24748 - Johnson Controls, Inc., Automotive Experience Division, Including Workers Whose Unemployment...

    Science.gov (United States)

    2010-05-05

    ... of Johnson Controls, Inc., Automotive Experience Division, Greenfield, Ohio. The notice was published in the Federal Register on December 11, 2009 (74 FR 65798). At the request of the state, the... Employment and Training Administration Johnson Controls, Inc., Automotive Experience Division,...

  9. Composite magnetostrictive materials for advanced automotive magnetomechanical sensors

    International Nuclear Information System (INIS)

    In this paper we present the development of a composite magnetostrictive material for automotive applications. The material is based on cobalt ferrite, CoO centre dot Fe2O3, and contains a small fraction of metallic matrix phase that serves both as a liquid phase sintering aid during processing and enhances the mechanical properties over those of a simple sintered ferrite ceramic. In addition the metal matrix makes it possible to braze the material making the assembly of a sensor relatively simple. The material exhibits good sensitivity and should have high corrosion resistance while at the same time it is low cost

  10. Strategies For Turkish Automotive By-Products Industry

    Directory of Open Access Journals (Sweden)

    Hakan Bütüner

    2012-06-01

    Full Text Available Automotive industry is comprised of the industry which produces vehicles, and the industry which, as dominated by Small and Medium Scale Enterprises, produces parts, modules, and systems of such vehicles according to the technical documentation. Having been established through technical and economic supports of the major manufacturers, and developed in the course of time, the by products industry is involved its activities as a significant potential for the domestic economy at present. In this article, general characteristics of Turkish automative by products industry, its weak aspects, aspects need to be improved, and dominant strategies that need to be considered for the improvement are discussed.

  11. Pulsating flow performance of a turbocharger compressor for automotive application

    International Nuclear Information System (INIS)

    Highlights: • The behavior of a turbocharger for automotive application was studied. • A broad experimental activity was developed under steady and unsteady flow. • Compressor performance was analyzed under unsteady flow. • Compressor unsteady flow performance deviates from the corresponding steady state. • The surge line position proved to be affected by unsteady flow operation. -- Abstract: Downsizing with turbocharging is the most promising way, especially in terms of cost, to get reduced fuel consumption and CO2 emissions particularly in the case of Spark Ignition engines. In automotive applications the turbocharger turbine usually operates under heavy unsteady flow conditions due to the opening and closing of engine valves. However, in the case of extremely downsized engines with a reduced number of cylinders and a small intake circuit volume also the compressor performance can be affected by the unsteady flow generated by the engine intake valves. To make simulation models able to accurately predict engine performance, a better understanding of compressor and turbine pulsating flow performance can be accomplished through measurements performed on specialized test facilities, using suitable measuring equipment. As regards the turbocharger compressor, the surge line position under pulsating flow conditions is another important aspect to be considered. In the paper the results of a broad experimental investigation performed on a small turbocharger compressor matched to a downsized gasoline engine are presented. Measurements were developed on the test facility operating at the University of Genoa, which allows investigations on automotive turbochargers both under steady and unsteady flow conditions. Tested turbocharger compressor was coupled to the automotive engine intake circuit and the pulsating flow was generated by a motor-driven cylinder head fitted with a variable valve actuation system. Different levels of turbocharger rotational speed and

  12. Change in the automotive industry; Fordonsindustrin i foeraendring

    Energy Technology Data Exchange (ETDEWEB)

    Fjaellstroem, Mikael [Swedish Energy Agency, Eskilstuna (Sweden); Pohl, Hans [Sycon Energikonsult AB, Malmoe (Sweden); Liljemark, Stefan [SwedPower AB (Sweden); Leander, Aasa [Swedish Energy Agency, Eskilstuna (Sweden); Maruo, Kanehira [Chalmers Univ. of Tech., Goeteborg (Sweden); Waldenby, Torbjoern [JIC Consulting AB, Goeteborg (Sweden); Mellgren, Henry [Fordonskomponentgruppen, Goeteborg (Sweden)

    2002-04-01

    The 'Change in the Automotive Industry' investigation was initiated by the Swedish Energy Agency in the autumn of 2000. The objective has been to illuminate and analyse technical developments in respect of the use of electricity in vehicles, not only for various ancillary systems but also for propulsion. A number of Swedish businesses that have, or could have, links with the automotive industry have been investigated. The main aim has been to attempt to identify the opportunities for the industry to meet and benefit from the changes. A total of 14 businesses have been visited, and a further 29 companies have replied to a survey questionnaire on the theme. Business intelligence shows that a great deal of work is being done on the use of electricity for automotive propulsion, in everything from battery vehicles, via electric hybrid vehicles to fuel cell vehicles. In terms of development, the Japanese manufacturers are in the lead, while the USA constitutes the largest single driving force behind development. The technical development requires a greater understanding within several new disciplines, and leads to major changes between different industry sectors. The results show that Sweden possesses world class expertise in several of the fields that can become very important for tomorrow's automotive industry. At the same time, the companies expect difficulties in recruiting personnel qualified in the appropriate disciplines, such as development and design. There is, therefore, a clear risk that the present-day expertise will progressively fade away if nothing is done.There is a wide range of awareness of the greater use of electricity in vehicles. However, in principle, all companies feel that development towards new drive trains will proceed rapidly. Most of the companies are also very interested in descriptions and analyses of the state of development. The general conclusion of the work is that there are excellent prospects for Swedish industry to

  13. Novel Design of HID Lamp Electronic Ballast for Automotive Systems

    Institute of Scientific and Technical Information of China (English)

    DU Ye-qiang; WANG Jin-hai; ZHENG Yu; ZHANG Cheng

    2007-01-01

    This paper presents a high intensity discharge(HID) lamp for automotive illumination.A novel type of ballast for HID is proposed without an acoustic resonance.The system consists of high frequency DC/DC converter,DC/AC inverter(SLA2403M), high voltage igniter and a microcontroller unit(MCU).The proposed ballast controls the complex start-up process and constant power process by programming on the microcontroller. It is verified that experimental results agree well with the calculated ones. The ballast features such functions as failure protection, line under-voltage, line over-voltage, output short circuit and disconnection protections.

  14. Demands on automotive battery performance, what is the best alloy?

    Science.gov (United States)

    Richter, G.

    Modern automotive batteries represent a compromise between starting performance and power handling. Being designed for high starting currents, their capacity amplitude for frequent cyclic loads is relatively small, compared with their nominal capacity. Considering the category of high-class passenger cars, the two-battery concept better meets requirements and at the same time improves the reliability of the starting system. It is expected that for both the starter battery (in the engine compartment) and the power-handling battery (in the boot), the leadcalciumtin system will be the most appropriate choice for the grid alloy.

  15. Irradiation Crosslinking of Polyamides for the Electrical and Automotive Industry

    International Nuclear Information System (INIS)

    Irradiation crosslinking of electrical cables and heat shrinkable tubes have been widely accepted in the automotive and electrical industry for a long time. Due higher demands regarding temperature resistance, arc resistance and good chemical resistance against oil and greases crosslinked injection moulded parts made out of polyamid and polybutylentherephtalate become also more and more interesting. Crosslinked polyamide can also replace thermosets for switches and offers therefore additional financial benefits. It will be shown on the basis of already realized projects, which basic requirements exist and how irradiation crosslinking can fulfil these demands

  16. The French market of automotive fuels; Marche francais des carburants

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2003-02-01

    The supermarkets are the main retailers of automotive fuels in France. With a growth of 1.7 point of market share, the supermarkets represented 57.2% of the fuel sales (in volume) in 2001. This performance is due to both their discount policy and their fast development over the whole territory. However, the oil companies have started a counter-offensive policy with new offers of services and more competitive prices. This article summarizes the results of an economic study carried out in July 2002 by Xerfi S.A. using the 2001 fuel sales data and the 2002-2003 vehicle sales forecasts. (J.S.)

  17. Property Criteria for Automotive Al-Mg-Si Sheet Alloys

    OpenAIRE

    Ramona Prillhofer; Gunther Rank; Josef Berneder; Helmut Antrekowitsch; Uggowitzer, Peter J.; Stefan Pogatscher

    2014-01-01

    In this study, property criteria for automotive Al-Mg-Si sheet alloys are outlined and investigated in the context of commercial alloys AA6016, AA6005A, AA6063 and AA6013. The parameters crucial to predicting forming behavior were determined by tensile tests, bending tests, cross-die tests, hole-expansion tests and forming limit curve analysis in the pre-aged temper after various storage periods following sheet production. Roping tests were performed to evaluate surface quality, for the deplo...

  18. Intelligent System for Fault Diagnosis in Automotive Applications

    OpenAIRE

    Kabir, Mashud

    2008-01-01

    This work presents an intelligent system for fault diagnosis in automotive applications. The system is proposed to handle faults in a running car as well as in a car which is in the process of being developed. The main goal of this work is to use the vast knowledge previously acquired by system experts, to visualize, localize and fix a fault in any of the life phases of a car. The existing techniques and systems which are in use for fault diagnosis are investigated. There is no system which c...

  19. NASA/DOE automotive Stirling engine project: Overview 1986

    Science.gov (United States)

    Beremand, D. G.; Shaltens, R. K.

    1986-01-01

    The DOE/NASA Automotive Stirling Engine Project is reviewed and its technical progress and status are presented. Key technologies in materials, seals, and piston rings are progressing well. Seven first-generation engines, and modifications thereto, have accumulated over 15,000 hr of test time, including 1100hr of in-vehicle testing. Results indicate good progress toward the program goals. The first second-generation engine is now undergoing initial testing. It is expected that the program goal of a 30-percent improvement in fuel economy will be achieved in tests of a second-generation engine in a Celebrity vehicle.

  20. NASA/DOE automotive Stirling engine project. Overview 1986

    Energy Technology Data Exchange (ETDEWEB)

    Beremand, D.G.; Shaltens, R.K.

    1986-01-01

    The DOE/NASA Automotive Stirling Engine Project is reviewed and its technical progress and status are presented. Key technologies in materials, seals, and piston rings are progressing well. Seven first-generation engines, and midifications thereto, have accumulated over 15 000 hr of test time, including 1100 hr of in-vehicle testing. Results indicate good progress toward the program goals. The first second-generation engine is now undergoing initial testing. It is expected that the program goal of a 30-percent improvement in fuel economy will be achieved in tests of a second-generation engine in a Celebrity vehicle.

  1. State Estimation in the Automotive SCR DeNOx Process

    DEFF Research Database (Denmark)

    Zhou, Guofeng; Jørgensen, John Bagterp; Duwig, Christophe;

    2012-01-01

    Selective catalytic reduction (SCR) of nitrogen oxides (NOx) is a widely applied diesel engine exhaust gas after-treatment technology. For effective NOx removal in a transient operating automotive application, controlled dosing of urea can be used to meet the increasingly restrictive legislations...... on exhaust gas emissions. For advanced control, e.g. Model Predictive Control (MPC), of the SCR process, accurate state estimates are needed. We investigate the performance of the ordinary and the extended Kalman filters based on a simple first principle system model. The performance is tested through...

  2. Part Transportation Improvement in Warehouse of an Automotive Factory

    Science.gov (United States)

    Choojan, Tiwapom; Chutima, Parames

    2016-05-01

    This research is focus on the problems cause the assembly line stop in a Japanese automotive manufacturer in Thailand. The problem arose from not being able to supply parts to the assembly line in time and supplying wrong parts to the assembly line. Methods to resolve these problems involved the followings: 1) design new tag labels, 2) improve operations method and 3) redesign the parts storage layout and supply routes. The result showed that the time for transferring parts from the warehouse to the preparing area and the overlapped routes were reduced. Moreover, the supply accuracy from the preparation area to the assembly line was improved.

  3. Trends in the automotive paint industry for corrosion protection

    Energy Technology Data Exchange (ETDEWEB)

    Blandin, Nathalie; Brunat, William [PPG Industries France, 3 Z.A.E. Les Dix Muids, B.P. 89, F-59583 Marly (France); Neuhaus, Ralf [PPG Industries Lacke GmbH, Stackenbergstrasse 34, D-42329 Wuppertal (Germany); Sibille, Ettore [PPG Industries Italia, Via Serra11, I-15028 Quattordio (Italy)

    2004-07-01

    Since many years ED-paints are protecting car bodies against corrosion. Currently the automotive paint industry is faced with increasing demands of higher levels of corrosion protection and also requests to comply with new environmental regulations and economical pressures. Some key factors that contributed significantly towards the improvement of corrosion protection systems are: - New generations of lead free ED-paints; - Weldable organic thin film for corrosion protection, especially in box cavities and flange areas. The goal of this paper is to show how the various elements of the 'anti-corrosion package' interact. (authors)

  4. Intern materialhanteringsutveckling på Kongsberg Automotive AB

    OpenAIRE

    Sandstedt, Mattias

    2008-01-01

    This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system. The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators whe...

  5. Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications

    Science.gov (United States)

    Friedrich, Klaus; Almajid, Abdulhakim A.

    2013-04-01

    Composite materials, in most cases fiber reinforced polymers, are nowadays used in many applications in which light weight and high specific modulus and strength are critical issues. The constituents of these materials and their special advantages relative to traditional materials are described in this paper. Further details are outlined regarding the present markets of polymer composites in Europe, and their special application in the automotive industry. In particular, the manufacturing of parts from thermoplastic as well as thermosetting, short and continuous fiber reinforced composites is emphasized.

  6. Automotive emission standards. (Latest citations from Pollution Abstracts). Published Search

    International Nuclear Information System (INIS)

    The bibliography contains citations concerning emission standards and air quality standards applied to automobile emissions. Included are federal and state regulations and policies regarding these emission standards. Techniques to meet emission standards are also addressed, involving fuel injection, catalysts, alternate engines, and automotive fuel refinery operations. Studies concerning implementation of automobile emission standards explore economic and environmental effects, testing and inspection procedures, and the automobile industry point of view. Most of the citations refer to gasoline engines, but a few pertain to diesel and other fuels. (Contains 250 citations and includes a subject term index and title list.)

  7. Characterization of process air emissions in automotive production plants.

    Science.gov (United States)

    D'Arcy, J B; Dasch, J M; Gundrum, A B; Rivera, J L; Johnson, J H; Carlson, D H; Sutherland, J W

    2016-01-01

    During manufacturing, particles produced from industrial processes become airborne. These airborne emissions represent a challenge from an industrial hygiene and environmental standpoint. A study was undertaken to characterize the particles associated with a variety of manufacturing processes found in the auto industry. Air particulates were collected in five automotive plants covering ten manufacturing processes in the areas of casting, machining, heat treatment and assembly. Collection procedures provided information on air concentration, size distribution, and chemical composition of the airborne particulate matter for each process and insight into the physical and chemical processes that created those particles. PMID:26273851

  8. Ultrapulse welding: A new joining technique. [for automotive industry

    Science.gov (United States)

    Anderson, D. G.

    1972-01-01

    The ultrapulse process is a resistance welding process that utilizes unidirectional current of high magnitude for a very short time with a precisely controlled dynamic force pulse. Peak currents of up to 220,000 amperes for two to ten milliseconds are used with synchronized force pulses of up to nine thousand pounds. The welding current passing through the relatively high resistance of the interface between the parts that are being joined results in highly localized heating. Described is the UPW process as it applies to the automotive industry.

  9. 3 CFR 13509 - Executive Order 13509 of June 23, 2009. Establishing a White House Council on Automotive...

    Science.gov (United States)

    2010-01-01

    ... a White House Council on Automotive Communities and Workers 13509 Order 13509 Presidential Documents... Automotive Communities and Workers Section 1. Policy. Over the last decade, the United States has experienced... automotive sector in towns and cities across the country has reached levels not seen in decades,...

  10. 76 FR 72674 - Approval for Expansion of Manufacturing Authority, Foreign-Trade Subzone 29F, Hitachi Automotive...

    Science.gov (United States)

    2011-11-25

    ..., notice inviting public comment has been given in the Federal Register (76 FR 9000, 2-16-2011) and the..., Hitachi Automotive Systems Americas, Inc., (Automotive Components), Harrodsburg, KY Pursuant to its... manufacturing authority on behalf of Hitachi Automotive Systems Americas, Inc. (Hitachi), operator of...

  11. Building Real Modularity Competence in Automotive Design, Development, Production, and After-service

    DEFF Research Database (Denmark)

    Sanchez, Ron

    2013-01-01

    In recent years, modular approaches to design and production have been discussed and implemented in various ways in the automotive industry. However, this paper draws on the author's extensive work with firms in the automotive and other industries to suggest that there is still relatively limited...... understanding of what modular strategies really mean and of what effective implementation of modularity strategies would entail in the automotive industry ' with the result that at least some automotive firms that claim to be using modular strategies are in fact doing so in name only. This paper then proposes...... the essential principles on which effective implementation of modular strategies depends in any industry. We illustrate these principles with examples of both effective and faulty modularity practice from the automotive and other industries. We then propose a modularity maturity model for assessing...

  12. On Mixed Flow Turbines for Automotive Turbocharger Applications

    Directory of Open Access Journals (Sweden)

    Bernhardt Lüddecke

    2012-01-01

    Full Text Available Due to increased demands for improved fuel economy of passenger cars, low-end and part-load performance is of key importance for the design of automotive turbocharger turbines. In an automotive drive cycle, a turbine which can extract more energy at high pressure ratios and lower rotational speeds is desirable. In the literature it is typically found that radial turbines provide peak efficiency at speed ratios of 0.7, but at high pressure ratios and low rotational speeds the blade speed ratio will be low and the rotor will experience high values of positive incidence at the inlet. Based on fundamental considerations, it is shown that mixed flow turbines offer substantial advantages for such applications. Moreover, to prove these considerations an experimental assessment of mixed flow turbine efficiency and optimal blade speed ratio is presented. This has been achieved using a new semi-unsteady measurement approach. Finally, evidence of the benefits of mixed flow turbine behaviour in engine operation is given. Regarding turbocharged engine simulation, the benefit of wide-ranging turbine map measurement data as well as the need for reasonable turbine map extrapolation is illustrated.

  13. Sulphur removal from used automotive lubricating oil by ionizing radiation

    International Nuclear Information System (INIS)

    Following the worldwide evolution with the purpose of a higher control of vehicular emissions, the specialists have looked for clean technologies and efficient procedures to make vehicular emissions free of pollutants. Much attention is given to the sulphur concentration in the gasoline, diesel and lubricating oils. The ionizing radiation is a promising technology for the removal of this pollutant when compared to other conventional treatment methods. In this work, the ionizing radiation was used to remove in significant levels the presence of sulphur in automotive motor oil. A 1000 mL sample of used automotive lubricating oil from a gas station was collected. This sample was fractioned and irradiated with 10, 20 50, 100, 200 and 500 kGy doses in a 60Co irradiator (GAMMACELL-220 - 12 kCi). The 50 and 70% (v/v) of MilliQ water and 30% (v/v) of hydrogen peroxide was used to improve the radiolysis The sulphur element before and after the irradiation was determined by X-ray fluorescence technique (WDXRF) using the Fundamental Parameters Method. The results showed approximately 70% sulphur removal at 500 kGy irradiation dose with 70% (v/v) of MilliQ water addition. (author)

  14. FE-Simulation Of Hemming In The Automotive Industry

    International Nuclear Information System (INIS)

    This paper summarizes and presents the most important results from a research project on FE simulation of hemming carried out at Volvo Cars Body Components and Chalmers University of Technology. In the automotive industry, hemming is used to join two sheet metal panels by bending the flange of the outer panel over the inner one. The final goal of the project was to simulate all of the hemming steps of production parts. In order to make three-dimensional simulations of hemming possible within reasonable simulation times, it is necessary to use shell elements and not solid elements. On the other hand, the radius of curvature of the outer part in the folded area is very small, normally of the same order of magnitude as the sheet thickness. This fact raises the question if shell elements are applicable in FE simulation of hemming. One part of the project was therefore a thorough investigation of the order of magnitude of the errors resulting from the use of shell elements in FE simulation of hemming. Another part of the project was devoted to three-dimensional simulations of the hemming of an automotive hood. The influence on the roll-in from several parameters, such as shell element formulation, adhesives, and anisotropy was studied. Finally, results from a forming simulation were also mapped to the flanging and hemming models in order to study the influence from the stamping of the outer panel on the roll-in

  15. Passive Two-Phase Cooling of Automotive Power Electronics: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, G.; Jeffers, J. R.; Narumanchi, S.; Bennion, K.

    2014-08-01

    Experiments were conducted to evaluate the use of a passive two-phase cooling strategy as a means of cooling automotive power electronics. The proposed cooling approach utilizes an indirect cooling configuration to alleviate some reliability concerns and to allow the use of conventional power modules. An inverter-scale proof-of-concept cooling system was fabricated, and tests were conducted using the refrigerants hydrofluoroolefin HFO-1234yf and hydrofluorocarbon HFC-245fa. Results demonstrated that the system can dissipate at least 3.5 kW of heat with 250 cm3 of HFC-245fa. An advanced evaporator design that incorporates features to improve performance and reduce size was conceived. Simulation results indicate its thermal resistance can be 37% to 48% lower than automotive dual side cooled power modules. Tests were also conducted to measure the thermal performance of two air-cooled condensers--plain and rifled finned tube designs. The results combined with some analysis were then used to estimate the required condenser size per operating conditions and maximum allowable system (i.e., vapor and liquid) temperatures.

  16. Global sustainability and key needs in future automotive design.

    Science.gov (United States)

    McAuley, John W

    2003-12-01

    The number of light vehicle registrations is forecast to increase worldwide by a factor of 3-5 over the next 50 years. This will dramatically increase environmental impacts worldwide of automobiles and light trucks. If light vehicles are to be environmentally sustainable globally, the automotive industry must implement fundamental changes in future automotive design. Important factors in assessing automobile design needs include fuel economy and reduced emissions. Many design parameters can impact vehicle air emissions and energy consumption including alternative fuel or engine technologies, rolling resistance, aerodynamics, drive train design, friction, and vehicle weight. Of these, vehicle weight is key and will translate into reduced energy demand across all energy distribution elements. A new class of vehicles is needed that combines ultra-light design with a likely hybrid or fuel cell engine technology. This could increase efficiency by a factor of 3-5 and reduce air emissions as well. Advanced lightweight materials, such as plastics or composites, will need to overtake the present metal-based infrastructure. Incorporating design features to facilitate end-of-life recycling and recovery is also important. The trend will be towards fewer materials and parts in vehicle design, combined with ease of disassembly. Mono-material construction can create vehicle design with improved recyclability as well as reduced numbers of parts and weight. PMID:14700327

  17. Reliability Centered Maintenance in Schedule Improvement of Automotive Assembly Industry

    Directory of Open Access Journals (Sweden)

    Rizauddin Ramli

    2012-01-01

    Full Text Available Problem statement: Today, in many automotive manufacturing companies, maintenance management is an important factor to maintain the plant operation and production equipments. Approach: In this study, we present an implementation of Reliability Centered Maintenance (RCM practice in one of the automotive manufacturing company in Malaysia. The RCM practice was used to assist the company in focusing their maintenance activities based on the criticalities of the equipments by applying the Failure Modes and Effects Analysis (FMEA. The implementation of RCM was carried out in 4 stages; preparation, system analysis, decision making and feedback. The aim of RCM was to reduce the number of maintenance checklist and to improve significantly the integrity of maintenance practice. Results: As a result, the new RCM framework was generated where Class A equipment was at the top of the monthly maintenance frequency priority, followed by Class B and Class C equipment which had lesser critical value. Conclusion: The new RCM framework is used to conduct visible guideline and propose a new maintenance schedule. The guideline is useful for future maintenance strategy improvement. After the implementation, it can be ascertained that our proposed RCM is useful in reducing maintenance personnel burden and this leads to improvement of productivity.

  18. Automotive Fuels Survey. Part 1. Raw materials and conversion

    Energy Technology Data Exchange (ETDEWEB)

    Elam, N. [ed.

    1996-12-01

    The purpose of the title survey is to present an overview of important aspects of raw materials and their conversion to automotive fuels. In combination with Part 2 (Distribution and use of conventional and alternative automotive fuels) it considers the complete well to wheel chain of various fuels. Part 3 (to be published in 1998) will present a direct comparison of the well to wheel chains of the various fuels under consideration. In this part of the IEA/AFIS Annual Report a number of key aspects of the various substances, which are, or have been, proposed as road transport fuels are discussed. The reviews of each type of raw material start with a presentation of the availability of the different energy sources. Next, the subjects of exploration, production and cultivation and harvesting of the various energy sources and the logistics of transporting them to factories where they must be converted into transport fuels are discussed, including the technology, costs and efficiency of the processing. figs., tabs., refs.

  19. Direct Injection Compression Ignition Diesel Automotive Technology Education GATE Program

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Carl L

    2006-09-25

    The underlying goal of this prqject was to provide multi-disciplinary engineering training for graduate students in the area of internal combustion engines, specifically in direct injection compression ignition engines. The program was designed to educate highly qualified engineers and scientists that will seek to overcome teclmological barriers preventing the development and production of cost-effective high-efficiency vehicles for the U.S. market. Fu1iher, these highly qualified engineers and scientists will foster an educational process to train a future workforce of automotive engineering professionals who are knowledgeable about and have experience in developing and commercializing critical advanced automotive teclmologies. Eight objectives were defmed to accomplish this goal: 1. Develop an interdisciplinary internal co1nbustion engine curriculum emphasizing direct injected combustion ignited diesel engines. 2. Encourage and promote interdisciplinary interaction of the faculty. 3. Offer a Ph.D. degree in internal combustion engines based upon an interdisciplinary cuniculum. 4. Promote strong interaction with indusuy, develop a sense of responsibility with industry and pursue a self sustaining program. 5. Establish collaborative arrangements and network universities active in internal combustion engine study. 6. Further Enhance a First Class educational facility. 7. Establish 'off-campus' M.S. and Ph.D. engine programs of study at various indusuial sites. 8. Extend and Enhance the Graduate Experience.

  20. Property Criteria for Automotive Al-Mg-Si Sheet Alloys

    Directory of Open Access Journals (Sweden)

    Ramona Prillhofer

    2014-07-01

    Full Text Available In this study, property criteria for automotive Al-Mg-Si sheet alloys are outlined and investigated in the context of commercial alloys AA6016, AA6005A, AA6063 and AA6013. The parameters crucial to predicting forming behavior were determined by tensile tests, bending tests, cross-die tests, hole-expansion tests and forming limit curve analysis in the pre-aged temper after various storage periods following sheet production. Roping tests were performed to evaluate surface quality, for the deployment of these alloys as an outer panel material. Strength in service was also tested after a simulated paint bake cycle of 20 min at 185 °C, and the corrosion behavior was analyzed. The study showed that forming behavior is strongly dependent on the type of alloy and that it is influenced by the storage period after sheet production. Alloy AA6016 achieves the highest surface quality, and pre-ageing of alloy AA6013 facilitates superior strength in service. Corrosion behavior is good in AA6005A, AA6063 and AA6016, and only AA6013 shows a strong susceptibility to intergranular corrosion. The results are discussed below with respect to the chemical composition, microstructure and texture of the Al-Mg-Si alloys studied, and decision-making criteria for appropriate automotive sheet alloys for specific applications are presented.

  1. Damage tolerance reliability analysis of automotive spot-welded joints

    Energy Technology Data Exchange (ETDEWEB)

    Mahadevan, Sankaran; Ni Kan

    2003-07-01

    This paper develops a damage tolerance reliability analysis methodology for automotive spot-welded joints under multi-axial and variable amplitude loading history. The total fatigue life of a spot weld is divided into two parts, crack initiation and crack propagation. The multi-axial loading history is obtained from transient response finite element analysis of a vehicle model. A three-dimensional finite element model of a simplified joint with four spot welds is developed for static stress/strain analysis. A probabilistic Miner's rule is combined with a randomized strain-life curve family and the stress/strain analysis result to develop a strain-based probabilistic fatigue crack initiation life prediction for spot welds. Afterwards, the fatigue crack inside the base material sheet is modeled as a surface crack. Then a probabilistic crack growth model is combined with the stress analysis result to develop a probabilistic fatigue crack growth life prediction for spot welds. Both methods are implemented with MSC/NASTRAN and MSC/FATIGUE software, and are useful for reliability assessment of automotive spot-welded joints against fatigue and fracture.

  2. Implementation of 3D Optical Scanning Technology for Automotive Applications.

    Science.gov (United States)

    Kuş, Abdil

    2009-01-01

    Reverse engineering (RE) is a powerful tool for generating a CAD model from the 3D scan data of a physical part that lacks documentation or has changed from the original CAD design of the part. The process of digitizing a part and creating a CAD model from 3D scan data is less time consuming and provides greater accuracy than manually measuring the part and designing the part from scratch in CAD. 3D optical scanning technology is one of the measurement methods which have evolved over the last few years and it is used in a wide range of areas from industrial applications to art and cultural heritage. It is also used extensively in the automotive industry for applications such as part inspections, scanning of tools without CAD definition, scanning the casting for definition of the stock (i.e. the amount of material to be removed from the surface of the castings) model for CAM programs and reverse engineering. In this study two scanning experiments of automotive applications are illustrated. The first one examines the processes from scanning to re-manufacturing the damaged sheet metal cutting die, using a 3D scanning technique and the second study compares the scanned point clouds data to 3D CAD data for inspection purposes. Furthermore, the deviations of the part holes are determined by using different lenses and scanning parameters. PMID:22573995

  3. Springback Prediction, Compensation and Correlation for Automotive Stamping

    International Nuclear Information System (INIS)

    To reduce weight and increase fuel efficiency and safety, more and more automotive sheet stamping parts are being made of aluminum and high strength steels. Forming of such materials encounters not just reduced formability but also dimensional quality problems. Springback prediction accuracy and compensation effectiveness have been the major challenge to die development, construction and tryout. In this paper, the factors that affect the accuracy of springback prediction are discussed, which includes the effect of material models, the selection of element size, and the contact algorithms. Springback predictions of several automotive aluminum and high strength panels are compared with measurement data. The examples show that the prediction correlates with measurement data in both springback trend and magnitude. The effect of springback on final product can be reduced or eliminated through process control and die face compensation. The process control method involves finding the root causes of springback and eliminating them through process modification. The geometrical compensation of die surface is a direct way to eliminate the springback effect. The global scaling compensation method is normally limited to parts with relatively small springback. For large springback and twisting, a new approach is discussed, which takes into account of the effect of deformation and springback history. The compensation is achieved iteratively by solving a system of non-linear equations. Production dies were cut to the compensated surface, which shows that the die compensation is an efficient way to reduce springback-induced geometry deviation

  4. Exhaust gas energy recovery system of pneumatic driving automotive engine

    Institute of Scientific and Technical Information of China (English)

    Han Yongqiang; Sun Wenxu; Li Qinghua; Zhong Ming; Hao Wei; Du Wenchang

    2011-01-01

    Almost the same quantity to net output work of energy has been carried out and wasted by exhaust gas in typical automotive engine. Recovering the energy from exhaust gas and converting to mechanical energy will dramatically increase the heat efficiency and decrease the fuel consumption. With the increasing demand of fuel conservation, exhaust gas energy recovery technologies have been a hot topic. At present, many researches have been focused on heating or cooling the cab, mechanical energy using and thermo-electronic converting. Unfortunately, the complicated transmission of mechanical energy using and the depressed efficiency of thermo-electronic converting restrict their widely applying. In this paper, a kind of exhaust gas energy recovery system of pneumatic driving automotive engine, in which highly compressed air acts as energy storing and converting carrier, has been established. Pneumatic driving motor can produce moderate speed and high torque output, which is compatible for engine using. The feasibility has been certificated by GT-Power simulation and laboratory testes. The technologies about increasing recovery efficiency have been discussed in detail. The results demonstrated that the in parallel exhaust gas energy recovery system, which is similar to the compound turbo-charger structure can recovery 8 to 10 percent of rated power output. At last, a comprehensive system,which includes Rankine cycle based power wheel cycle unit etc. , has been introduced.

  5. Measurement of Soot Deposition in Automotive Components Using Neutron Radiography

    International Nuclear Information System (INIS)

    About 40% of air pollution is generated by vehicles and transportation. The particulate matter (PM) emission significantly impacts human health. Fine particles below 2.5 μm (PM2.5) can enter the lungs and lead to respiratory problems. These particles not only influence human health, but also reduce the capability of many automobile exhaust heat exchanging devices. Neutron radiography is a non-destructive method of analyzing carbonaceous PM. While neutron radiography has been demonstrated for soot measurement in the past, the application has not considered the presence of unburned hydrocarbons, significant amounts of moisture nor examined complex geometrical configurations. The purpose of this work is to study a reliable non-destructive testing methodology using neutron radiography for measurement of soot distribution in automotive components. A soot standard (aluminium target) was designed and manufactured as a calibration tool. The standard is radiographed and used to measure the differences between various soot thickness and compositions. The radiograph images are analyzed to determine a calibration curve based upon the composition of the materials which can then be used for analysis of the automotive components. Experiments are performed using a diesel engine to produce soot deposits on exhaust piping. Soot distribution on exhaust piping is measured using neutron radiography. (authors)

  6. Concepts for particle foam based ultralight automotive interior parts

    Science.gov (United States)

    Trassl, C.; Altstädt, V.; Schreier, P.

    2014-05-01

    The described concepts for modern automotive interior parts are based on polypropylene (PP). These interior parts have a core of expanded polypropylene particle foam (EPP) and a decorative layer of a thermoplastic polyolefin elastomer (TPO) film. Compared with conventional solutions in the field of automotive interior parts, they are characterised mainly due to the avoidance of material mixtures so that they have better recycling properties and are significantly lighter in spite of comparable crash behaviour. Because of the optimized combination of positive component properties (specifically, the rigidity of the carrier, lower density combined with the better crash behaviour of the EPP foam core and good haptic and optical properties of the film), the multi-material system compensates the disadvantages of the individual components. In addition, the integration of all process steps into a new single-step manufacturing process combined with the elimination of an additional surface treatment means that the new ultra-light concept should lead to a significant reduction in the costs and cycle time.

  7. Recycle of mixed automotive plastics: A model study

    Science.gov (United States)

    Woramongconchai, Somsak

    This research investigated blends of virgin automotive plastics which were identified through market analysis. The intent was that this study could be used as a basis for further research in blends of automotive plastics recyclate. The effects of temperature, shear, time, and degree of mixing in a two-roll mill, a single-screw extruder, and a twin-screw extruder were investigated. Properties were evaluated in terms of melt flow, rigidity, strength, impact, heat resistance, electrical resistivity, color, and resistance to water and gasoline. Torque rheometry, dynamic mechanical analysis (DMA), optical and scanning electron microscopy were used to characterize the processability and morphology of major components of the blends. The two-roll mill was operated at high temperature, short time, and low roll speed to avoid discolored and degraded materials. The single-screw extruder and twin-screw extruder were operated at medium and high temperature and high screw speed, respectively, for optimizing head pressure, residence time, shear and degree of mixing of the materials. Melt index increased with extrusion temperature. Flexural modulus increased with the processing temperatures in milling or twin-screw extrusion, but decreased with the increasing single-screw extrusion temperature. Tensile modulus was also enhanced by increasing processing temperature. The tensile strengths for each process were similar and relatively low. The impact strength increased with temperature and roll speed in two-roll milling, was unaffected by the single-screw extrusion temperature and decreased with increasing twin-screw extrusion temperature. Heat resistance was always reduced by higher processing temperature. The volume resistivity increased, water absorption was unaffected and gasoline absorption altered by increased processing temperature. The latter increased somewhat with mill temperature, roll speed (two-roll mill) and higher extrusion temperature (single-screw extruder), but

  8. COP Prediction of an ejector refrigeration cycle combined with a vapour compression cycle for automotive air conditioning

    Directory of Open Access Journals (Sweden)

    Nat Suvarnakuta

    2014-03-01

    Full Text Available This paper presents the COP prediction of an ejector refrigeration cycle combined with a vapour compression cycle for automotive air conditioning. Using computational fluid dynamics (CFD technique, the performance of an ejector was analyzed in term of the entrainment ratio (Rm and critical back pressure (CBP. The results from this study were compared with a previous study of combined ejector refrigeration system for automotive air conditioning application [1] which the entrainment ratio (Rm were predicted from one-dimensional (1-D equation. The performance of an ejector (Rm and CBP from CFD and onedimensional method were analyzed and used as database for a mathematical modeling. In order to predict the COP of the combined system, a set of mathematical equations was developed using EES. The operating conditions are chosen accordingly as, intercooler temperature between 15 ๐ C and 25 ๐ C, condenser temperature equal to 35 ๐ C and evaporator temperature equal to 5 ๐ C. However, when generator temperatures are 80 ๐ C, 85 ๐ C and 90 ๐ C, the results showed average relative errors of the COP of an ejector refrigeration cycle (COPej, between CFD and 1-D are 44.64%, 50.47% and 59.68% respectively, and between CFD and 1-D NEW are 1.54%, 0.08% and 6.49% respectively.

  9. The NASA NASTRAN structural analysis computer program - New content

    Science.gov (United States)

    Weidman, D. J.

    1978-01-01

    Capabilities of a NASA-developed structural analysis computer program, NASTRAN, are evaluated with reference to finite-element modelling. Applications include the automotive industry as well as aerospace. It is noted that the range of sub-programs within NASTRAN has expanded, while keeping user cost low.

  10. Supplier–customer relationships: Weaknesses in south african automotive supply chains

    Directory of Open Access Journals (Sweden)

    M. J. Naude

    2012-11-01

    Full Text Available The South African automotive industry, which is an important sector in the South African economy, needs to function efficiently if it is to compete internationally. However, South African automotive components manufacturers (ACMs are not internationally competitive and automotive assemblers, also known as original equipment manufacturers (OEMs, often import cheaper components from abroad. All parties in the South African automotive supply chains need each other to ensure optimal efficiency and competitiveness. Furthermore, it is vital that good relationships exist between customers and suppliers in the automotive supply chains in South Africa. ACMs are central to automotive supply chains. A survey was conducted among ACMs to determine the nature of relationships that exist between buyers and suppliers in South Africa’s automotive supply chains. The results showed that collaborative relationships do indeed exist between members of the supply chain but that communication, understanding of the parties’ situations and cooperation can improve this relationship and so create total alliance between OEMs and ACMs.

  11. GATE Center of Excellence at UAB in Lightweight Materials for Automotive Applications

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-07-31

    This report summarizes the accomplishments of the UAB GATE Center of Excellence in Lightweight Materials for Automotive Applications. The first Phase of the UAB DOE GATE center spanned the period 2005-2011. The UAB GATE goals coordinated with the overall goals of DOE's FreedomCAR and Vehicles Technologies initiative and DOE GATE program. The FCVT goals are: (1) Development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost; (2) To provide a new generation of engineers and scientists with knowledge and skills in advanced automotive technologies. The UAB GATE focused on both the FCVT and GATE goals in the following manner: (1) Train and produce graduates in lightweight automotive materials technologies; (2) Structure the engineering curricula to produce specialists in the automotive area; (3) Leverage automotive related industry in the State of Alabama; (4) Expose minority students to advanced technologies early in their career; (5) Develop innovative virtual classroom capabilities tied to real manufacturing operations; and (6) Integrate synergistic, multi-departmental activities to produce new product and manufacturing technologies for more damage tolerant, cost-effective, and lighter automotive structures.

  12. Bond graph modeling and simulation of impact dynamics of an automotive crash

    International Nuclear Information System (INIS)

    With increase in the speeds of automotives, safety has become more and more important aspect of designers to care for. Thus, it is necessary to design the automobile body structure keeping in view all the safety requirements. As a result of the above-mentioned facts, in the recent years, the designers in making automotives more safe, more collision resistant and crash worthy have focused increased attention on designing automotives, which provides greater protection for the drivers and the passengers in case of an accident. Before a new model is launched into the market, a complete collision analysis is carried out to check the damage reduction capabilities and impact protection of automotives in case of an accident. Research in the field of automotive collision and impact analysis is a continuing activity and dedicated groups of engineers are devoting their full time and efforts for this. In this research work, the main attention is focused to provide a detailed knowledge about automotive collision analysis. The objective of this research paper is to develop an understanding of the automotive collision response. For this, we have done a simulation experiment in which, on a railroad, a train car is separated from a train and is moving towards two stationary train cars. By using a bond graph model of the system its state-space equations are found. Then by using software, the simulation is carried out. The bond graph method is a graphical presentation of the power flow using bonds. (author)

  13. A proposed centralised distribution model for the South African automotive component industry

    Directory of Open Access Journals (Sweden)

    Micheline J. Naude

    2009-12-01

    Full Text Available Purpose: This article explores the possibility of developing a distribution model, similar to the model developed and implemented by the South African pharmaceutical industry, which could be implemented by automotive component manufacturers for supply to independent retailers. Problem Investigated: The South African automotive components distribution chain is extensive with a number of players of varying sizes, from the larger spares distribution groups to a number of independent retailers. Distributing to the smaller independent retailers is costly for the automotive component manufacturers. Methodology: This study is based on a preliminary study of an explorative nature. Interviews were conducted with a senior staff member from a leading automotive component manufacturer in KwaZulu Natal and nine participants at a senior management level at five of their main customers (aftermarket retailers. Findings: The findings from the empirical study suggest that the aftermarket component industry is mature with the role players well established. The distribution chain to the independent retailer is expensive in terms of transaction and distribution costs for the automotive component manufacturer. A proposed centralised distribution model for supply to independent retailers has been developed which should reduce distribution costs for the automotive component manufacturer in terms of (1 the lowest possible freight rate; (2 timely and controlled delivery; and (3 reduced congestion at the customer's receiving dock. Originality: This research is original in that it explores the possibility of implementing a centralised distribution model for independent retailers in the automotive component industry. Furthermore, there is a dearth of published research on the South African automotive component industry particularly addressing distribution issues. Conclusion: The distribution model as suggested is a practical one and should deliver added value to automotive

  14. Sustaining Competitiveness Through product Development Activities Within Malaysian Automotive Suppliers

    Directory of Open Access Journals (Sweden)

    Norizah Mohamad

    2012-01-01

    Full Text Available The local automotive suppliers are facing a number of important challenges such asglobalisation, new requirement in market specifications and the competition brought about by theAsean Free Trade Area (AFTA agreements. In an effort to enhance the competitiveness of themanufacturing sector, the government has implemented the Second Industrial Master Plan, IMP2(1996-2005. The focus of the IMP2 is more on innovation and applications of new technologies, sothat industries can move up the value chain of their activities. Innovative capabilities achieved fromcompanies’ new product development activities have been recognized to be crucial for companies tosustain their competitiveness and organisational success. The importance of product development ismost obvious in the context of the discussion on the competitiveness of the Malaysian automotivesuppliers. The study will focus on the small medium enterprises (SMEs that make up more than 60 %of these automotive suppliers. The study is to determine the extensiveness of the suppliers’ productdevelopment activities by examining the involvement of the suppliers in customer’s productdevelopment activities. Consequently, the impact of this involvement to the competitiveness of thesuppliers is examined. The results were established based from a survey to parts and componentssuppliers of Proton, the Malaysian car national assembler. The study has shown that the SMEs wereinvolved from the early stages of the product development process that is during the design stage. Theproduct development efforts have shown to contribute towards increasing firms’ market share andfirms were also able to gain a better understanding of future product demand. A significant number ofthe suppliers have managed to penetrate the export market. Unfortunately, among the respondents,there is only one system supplier. This indicates that, either the technological capabilities of theSMEs still needed upgrading for the requirement as

  15. Thermal Comfort Assessment: A Case Study at Malaysian Automotive Industry

    Directory of Open Access Journals (Sweden)

    A. R. Ismail

    2009-01-01

    Full Text Available Problem statement: Thermal comfort has a great influence on the productivity and satisfaction of indoor building occupants. The exposure to excessive heat during work may cause discomfort and contributed to low productivity among workers. Malaysia known with its hot and humid weather where in most of the survey study published indicated that workers in Malaysia automotive industries had exposed to excessive temperature while working. The study investigated the thermal comfort level experienced by workers at Malaysian automotive industry. Approach: The study had been conducted at one automotive parts assembly factory in Malaysia. The human subjects for the study constitute operators at tire receiving section of the factory. The environment examined was the relative humidity (%, WBGT, air temperature and radiant temperature (°C of the surrounding workstation area. The environmental factors were measured using Babuc apparatus, which is capable to measure simultaneously those mentioned environmental factors. The time series data of fluctuating level of factors were plotted to identify the significant changes of factors. Then thermal comfort of the workers was assessed by using ASHRAE thermal sensation scale by using Predicted Mean Vote (PMV. Further Predicted Percentage Dissatisfied (PPD was used to estimate the thermal comfort satisfaction of the occupant. Finally the PPD versus PMV were plotted to present the thermal comfort scenario of workers involved in related workstation. Results: The trend of relative humidity curve from the graph also indicated the increasing level of discomfort. The radiant temperature observed seems consistent during the study while there was decreasing of WBGT start from afternoon due to the rain. The study revealed that the PPD value of 54% of the workers population at the workstation are likely to be satisfied with thermal comfort at this station while the PMV index from ASHRAE indicated the value 1

  16. Investigation on hardness and impact resistance of automotive brake pad composed with rice husk dust

    Science.gov (United States)

    Bahari, Shahril Anuar; Isa, Khairul Hafizee; Kassim, Masitah Abu; Mohamed, Zulkifli; Othman, Eliasidi Abu

    2012-06-01

    In this study, hardness and impact resistance properties of automotive brake pad composed with rice husk dust (RHD) were documented. RHD was mixed with other metallic and synthetic ingredients of automotive brake pad. To obtain RHD, rice husk was ground and dried to 1 - 3% moisture content. The RHD was screened to obtain different dust sizes (80 and 100-mesh) before it was mixed with other materials at different percentages of composition (10 and 30%). The mixture was then pressed to produce brake pad. Rockwell hardness testing machine was used in hardness determination, while Izod impact testing machine was used in impact resistance determination. Hardness resistance of automotive brake pad mixed with 10% composition and 80-mesh size of RHD was significantly higher than 100-mesh. Hardness resistance of automotive brake pad mixed with 30% composition and 100-mesh size of RHD was slightly higher than 80 mesh. However, based on analysis, the difference was not significant. According to the result, hardness resistance of automotive brake pad mixed with 30% composition of RHD was higher than 10%. RHD has filled up the space and enhanced the micro structural behaviour of automotive brake pad. Impact resistance of automotive brake pad mixed with 10% composition and 80-mesh size of RHD was insignificantly higher than 100-mesh. Impact resistance of automotive brake pad mixed with 30% composition and 80-mesh size of RHD was significantly higher than 100 mesh. Large RHD size has increased the capability to resist high-rated impact loading. The impact energy was distributed over wider area for larger particle size. This factor has increased the impact resistance of automotive brake pad from large dust size. Impact resistance of automotive brake pad mixed with 80-mesh size and 30% composition of RHD was higher than 10%. In contrast, impact resistance of automotive brake pad mixed with 100-mesh size and 10% composition of RHD was higher than 30%. However, the difference was not

  17. The evolution of green patenting activity in the automotive sector (1965-2012)

    DEFF Research Database (Denmark)

    Faria, Lourenco; Andersen, Maj Munch

    The paper aims to analyze the evolution of eco-innovative activity and strategies in the automotive sector over time. We have chosen to use a patent count methodology tracking the development of selected technologies considered as promising “green technologies” in the automotive sector. Our...... methodology is based on a normalized Relative Technologic Specialization Index derived from Relative Specialization index, in order to measure the evolution of individual firms’ specialization on the specified technological areas. Our findings show that all the major firms in the automotive industry are...

  18. Understanding the evolution of eco-innovative activity in the automotive sector: a patent based analysis

    DEFF Research Database (Denmark)

    Faria, Lourenco; Andersen, Maj Munch

    The paper aims to analyze the evolution of eco-innovative activity and strategies in the automotive sector over time. We suggest to use a patent count methodology tracking the development of selected technologies considered as promising ?green technologies? in the automotive sector. The paper...... contributes to an understanding of the industrial dynamics of the greening of industry and the economy , a theme little analyzed despite the huge and rapidly increasing literature on sustainable development and innovation. Our findings show that all the major firms in the automotive industry are diversifying...

  19. High capacity hydrogen storage materials: attributes for automotive applications and techniques for materials discovery.

    Science.gov (United States)

    Yang, Jun; Sudik, Andrea; Wolverton, Christopher; Siegel, Donald J

    2010-02-01

    Widespread adoption of hydrogen as a vehicular fuel depends critically upon the ability to store hydrogen on-board at high volumetric and gravimetric densities, as well as on the ability to extract/insert it at sufficiently rapid rates. As current storage methods based on physical means--high-pressure gas or (cryogenic) liquefaction--are unlikely to satisfy targets for performance and cost, a global research effort focusing on the development of chemical means for storing hydrogen in condensed phases has recently emerged. At present, no known material exhibits a combination of properties that would enable high-volume automotive applications. Thus new materials with improved performance, or new approaches to the synthesis and/or processing of existing materials, are highly desirable. In this critical review we provide a practical introduction to the field of hydrogen storage materials research, with an emphasis on (i) the properties necessary for a viable storage material, (ii) the computational and experimental techniques commonly employed in determining these attributes, and (iii) the classes of materials being pursued as candidate storage compounds. Starting from the general requirements of a fuel cell vehicle, we summarize how these requirements translate into desired characteristics for the hydrogen storage material. Key amongst these are: (a) high gravimetric and volumetric hydrogen density, (b) thermodynamics that allow for reversible hydrogen uptake/release under near-ambient conditions, and (c) fast reaction kinetics. To further illustrate these attributes, the four major classes of candidate storage materials--conventional metal hydrides, chemical hydrides, complex hydrides, and sorbent systems--are introduced and their respective performance and prospects for improvement in each of these areas is discussed. Finally, we review the most valuable experimental and computational techniques for determining these attributes, highlighting how an approach that

  20. An automotive suspension strut using compressible magnetorheological fluids

    Science.gov (United States)

    Hong, Sung-Ryong; Wang, Gang; Hu, Wei; Wereley, Norman M.; Niemczuk, Jack

    2005-05-01

    An automotive suspension strut is proposed that utilizes compressible magnetorheological (CMR) fluid. A CMR strut consists of a double ended rod in a hydraulic cylinder and a bypass comprising tubing and an MR valve. The diameter on each side of the piston rods are set to be different in order to develop spring force by compromising the MR fluid hydrostatically. The MR bypass valve is adopted to develop controllable damping force. A hydro-mechanical model of the CMR strut is derived, and the spring force due to fluid compressibility and the pressure drop in the MR bypass valve are analytically investigated on the basis of the model. Finally, a CMR strut, filled with silicone oil based MR fluid, is fabricated and tested. The spring force and variable damping force of the CMR strut are clearly observed in the measured data, and compares favorably with the analytical model.