Power Output Stability Research for Harvesting Automobile Exhaust Energy with Heat Capacity Material as Intermediate Medium

Science.gov (United States)

Xiao, Longjie; He, Tianming; Mei, Binyu; Wang, Yiping; Wang, Zongsong; Tan, Gangfeng

2018-06-01

Automobile exhaust energy thermoelectric utilization can promote energy-saving and emission-reduction. Unexpected urban traffic conditions lead to the hot-end temperature instability of the exhaust pipe-mounted thermoelectric generator (TEG), and influence the TEG power generation efficiency. The heat conduction oil circulation located at the hot-end could smooth the temperature fluctuation, at the expense of larger system size and additional energy supply. This research improves the TEG hot-end temperature stability by installing solid heat capacity material (SHCM) to the area between the outer wall of the exhaust pipe and the TEG, which has the merits of simple structure, light weight and no additional energy consumption. The exhaust temperature and flow rate characteristics with various driving conditions are firstly studied for the target engine. Then the convective heat transfer models of SHCM's hot-end and thermoelectric material's cold-end are established. Meanwhile, SHCM thermal properties' effects on the amplitude and response speed of the TEG hot-end temperature are studied. The candidate SHCM with the characteristics of low thermal resistance and high heat capacity is determined. And the heat transfer model going through from TEG's hot-end to the cold-end is established. The results show that the SHCM significantly improves the TEG hot-end temperature stability but slightly reduces the average power output. When the engine working conditions change a lot, the SHCM's improvement on the TEG hot-end temperature stability is more significant, but the reduction of the average power output becomes more remarkable.

Analysis of CO2, CO and HC emission reduction in automobiles

Science.gov (United States)

Balan, K. N.; Valarmathi, T. N.; Reddy, Mannem Soma Harish; Aravinda Reddy, Gireddy; Sai Srinivas, Jammalamadaka K. M. K.; Vasan

2017-05-01

In the present scenario, the emission from automobiles is becoming a serious problem to the environment. Automobiles, thermal power stations and Industries majorly constitute to the emission of CO2, CO and HC. Though the CO2 available in the atmosphere will be captured by oceans, grasslands; they are not enough to control CO2 present in the atmosphere completely. Also advances in engine and vehicle technology continuously to reduce the emission from engine exhaust are not sufficient to reduce the HC and CO emission. This work concentrates on design, fabrication and analysis to reduce CO2, CO and HC emission from exhaust of automobiles by using molecular sieve 5A of 1.5mm. In this paper, the details of the fabrication, results and discussion about the process are discussed.

Energy Optimization for a Weak Hybrid Power System of an Automobile Exhaust Thermoelectric Generator

Science.gov (United States)

Fang, Wei; Quan, Shuhai; Xie, Changjun; Tang, Xinfeng; Ran, Bin; Jiao, Yatian

2017-11-01

An integrated starter generator (ISG)-type hybrid electric vehicle (HEV) scheme is proposed based on the automobile exhaust thermoelectric generator (AETEG). An eddy current dynamometer is used to simulate the vehicle's dynamic cycle. A weak ISG hybrid bench test system is constructed to test the 48 V output from the power supply system, which is based on engine exhaust-based heat power generation. The thermoelectric power generation-based system must ultimately be tested when integrated into the ISG weak hybrid mixed power system. The test process is divided into two steps: comprehensive simulation and vehicle-based testing. The system's dynamic process is simulated for both conventional and thermoelectric powers, and the dynamic running process comprises four stages: starting, acceleration, cruising and braking. The quantity of fuel available and battery pack energy, which are used as target vehicle energy functions for comparison with conventional systems, are simplified into a single energy target function, and the battery pack's output current is used as the control variable in the thermoelectric hybrid energy optimization model. The system's optimal battery pack output current function is resolved when its dynamic operating process is considered as part of the hybrid thermoelectric power generation system. In the experiments, the system bench is tested using conventional power and hybrid thermoelectric power for the four dynamic operation stages. The optimal battery pack curve is calculated by functional analysis. In the vehicle, a power control unit is used to control the battery pack's output current and minimize energy consumption. Data analysis shows that the fuel economy of the hybrid power system under European Driving Cycle conditions is improved by 14.7% when compared with conventional systems.

OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

Directory of Open Access Journals (Sweden)

Sujit Kumar Jha

2013-06-01

Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine.

Automobile control technology and traffic control

Energy Technology Data Exchange (ETDEWEB)

Takaba, Sadao [Univ. of Tokyo (Japan)

1988-09-05

In the field of automobile control technology, electronic was first adopted for the electronic fuel control as an answer to the exhaust gas regulations. The operations of the driving system, frame system or the automobile itself which is the combination of the two were optimized by adding sensors, computers, actuators, etc. to alleviate the burden of the driver, offering easier drivability and confortableness. For local driving control, measurement of distance up to obstacle has been practiced using the ultrasonic radar sensor. Research and development of microwave radar sensor have been carried out for years. Automatic driving has been a dream technology, and the study for the technology was started since early times. Remarkable progress was made recently in the navigation system for traffic control in wide area. New automobile traffic information communication and other systems are being developed. Historical description is made on the control and information systems for road transportation, dividing the period into the 1st, 2nd and 3rd generations. 10 references.

Optimal Design of an Automotive Exhaust Thermoelectric Generator

Science.gov (United States)

Fagehi, Hassan; Attar, Alaa; Lee, Hosung

2018-07-01

The consumption of energy continues to increase at an exponential rate, especially in terms of conventional automobiles. Approximately 40% of the applied fuel into a vehicle is lost as waste exhausted to the environment. The desire for improved fuel efficiency by recovering the exhaust waste heat in automobiles has become an important subject. A thermoelectric generator (TEG) has the potential to convert exhaust waste heat into electricity as long as it is improving fuel economy. The remarkable amount of research being conducted on TEGs indicates that this technology will have a bright future in terms of power generation. The current study discusses the optimal design of the automotive exhaust TEG. An experimental study has been conducted to verify the model that used the ideal (standard) equations along with effective material properties. The model is reasonably verified by experimental work, mainly due to the utilization of the effective material properties. Hence, the thermoelectric module that was used in the experiment was optimized by using a developed optimal design theory (dimensionless analysis technique).

Optimal Design of an Automotive Exhaust Thermoelectric Generator

Science.gov (United States)

Fagehi, Hassan; Attar, Alaa; Lee, Hosung

2018-04-01

The consumption of energy continues to increase at an exponential rate, especially in terms of conventional automobiles. Approximately 40% of the applied fuel into a vehicle is lost as waste exhausted to the environment. The desire for improved fuel efficiency by recovering the exhaust waste heat in automobiles has become an important subject. A thermoelectric generator (TEG) has the potential to convert exhaust waste heat into electricity as long as it is improving fuel economy. The remarkable amount of research being conducted on TEGs indicates that this technology will have a bright future in terms of power generation. The current study discusses the optimal design of the automotive exhaust TEG. An experimental study has been conducted to verify the model that used the ideal (standard) equations along with effective material properties. The model is reasonably verified by experimental work, mainly due to the utilization of the effective material properties. Hence, the thermoelectric module that was used in the experiment was optimized by using a developed optimal design theory (dimensionless analysis technique).

Proposal of laser-driven automobile

Science.gov (United States)

Yabe, Takashi; Oozono, Hirokazu; Taniguchi, Kazumoto; Ohkubo, Tomomasa; Miyazaki, Sho; Uchida, Shigeaki; Baasandash, Choijil

2004-09-01

We propose an automobile driven by piston motion, which is driven by water-laser coupling. The automobile can load a solar-pumped fiber laser or can be driven by ground-based lasers. The vehicle is much useful for the use in other planet in which usual combustion engine cannot be used. The piston is in a closed system and then the water will not be exhausted into vacuum. In the preliminary experiment, we succeeded to drive the cylindrical piston of 0.2g (6mm in diameter) on top of water placed inside the acrylic pipe of 8 mm in inner diameter and the laser is incident from the bottom and focused onto the upper part of water by the lens (f=8mm) attached to the bottom edge.

OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

Directory of Open Access Journals (Sweden)

Sujit Kumar Jha

2013-06-01

Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine. muffler, noise, vibration,modal analysis,

Modern steels for light automobiles (review)

Science.gov (United States)

Tikhonov, A. K.

1994-10-01

The article considers the directions of work at VAZ together with metallurgists of the CIS for creating highly efficient economically-alloyed and microalloyed steels; highly ductile forged steels with improved corrosion resistance coated with zinc and with good stamping, welding, and painting capacity. Steels are created for petrol tanks with aluminum-zinc coatings instead of lead, and new heat and corrosion-resistant steels are developed for automobile exhaust gas systems.

Role of Automobile Exhaust on the Photoreductive Solubilization of Atmospheric Iron

Science.gov (United States)

Haynes, J.; Majestic, B. J.; Cutler, E.

2016-12-01

Atmospheric iron (Fe) plays an essential role in the carbon cycle, affecting the Earth's energy balance and human health. Fe catalyzes oxidations of organic carbon species and serves as a limiting nutrient for phytoplankton in about half of the world's oceans. Wind-blown dust is the major source of atmospheric insoluble Fe while urban areas are correlated with relatively high percentages of soluble Fe. The occurrence of elevated levels of soluble Fe near urban and industrial regions suggests a correlation between Fe solubilization and organic combustion products, including polycyclic aromatic hydrocarbons (PAH). Fossil fuel consumption for internal combustion engines produce atmospheric PAH as a major component of automobile exhaust. Under light, PAH transform into oxidized components such as ketones and carboxylic acids. For example, phthalic acid (formed from naphthalene) inhibits Fe oxidation reactions and therefore may contribute to Fe reduction and increased solubility. The wind-blown dust and PAH-containing combustion products undergo long-range atmospheric transport leading to mixing and metal-organic interactions. The current study focuses on how a saturated PAH suspension affects the production of soluble Fe. Reactions of soil-based Fe and saturated solutions of PAH are performed under controlled conditions simulating natural sunlight. Samples are analyzed by ICPMS for soluble Fe before and after solar exposure reactions; soluble Fe is separated from total Fe by filtration and total Fe by acid-assisted microwave digestion. Data indicate an increase in Fe solubility (1.2% to 4.2%) in the presence of PAH, as compared to soil in water alone, and an even greater increase in Fe solubility (4.2% to 8.4%) when exposed to solar radiation. Research is ongoing to determine the dependence of oxidized PAH on kinetic and overall Fe solubility.

Automobile Engine: Basic Ignition Timing. Fordson Bilingual Demonstration Project.

Science.gov (United States)

Vick, James E.

These two vocational instructional modules on basic automobile ignition timing and on engine operation, four-stroke cycle, are two of eight such modules designed to assist recently arrived Arab students, limited in English proficiency (LEP), in critical instructional areas in a comprehensive high school. Goal stated for this module is for the…

Globalization of the automobile industry in China. Dynamics and barriers in the greening of road transportation

Energy Technology Data Exchange (ETDEWEB)

Gan, Lin

2001-08-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of the automobile in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policy making and transport management. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems and stronger emissions control would be relevant to China's drive toward sustainable transportation development. (author)

Long term effects of exposure to automobile exhaust on the pulmonary function of female adults in Tokyo, Japan

Science.gov (United States)

Sekine, K; Shima, M; Nitta, Y; Adachi, M

2004-01-01

Aims: To investigate the chronic effects of air pollution caused mainly by automobiles in healthy adult females. Methods: Respiratory symptoms were investigated in 5682 adult females who had lived in the Tokyo metropolitan area for three years or more in 1987; 733 of them were subjected to pulmonary function tests over eight years from 1987 to 1994. The subjects were divided into three groups by the level of air pollution they were exposed to during the study period. The concentrations of nitrogen dioxide and suspended particulate matter were the highest in group 1, and the lowest in group 3. Results: The prevalence rates of respiratory symptoms in group 1 were higher than those in groups 2 and 3, except for wheezing. Multiple logistic regression analysis showed significant differences in persistent phlegm and breathlessness. The subjects selected for the analysis of pulmonary function were 94, 210, and 102 females in groups 1, 2, and 3, respectively. The annual mean change of FEV1 in group 1 was the largest (-0.020 l/y), followed by that in group 2 (-0.015 l/y), and that in group 3 (-0.009 l/y). Testing for trends showed a significant larger decrease of FEV1 with the increase in the level of air pollution. Conclusions: The subjects living in areas with high levels of air pollution showed higher prevalence rates of respiratory symptoms and a larger decrease of FEV1 compared with those living in areas with low levels of air pollution. Since the traffic density is larger in areas with high air pollution, the differences among the groups may reflect the effect of air pollution attributable to particulate matter found in automobile exhaust. PMID:15031394

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

Energy Technology Data Exchange (ETDEWEB)

Lin Gan [Center for International Climate and Environmental Research, Oslo (Norway)

2003-05-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analysed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis. (author)

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

Energy Technology Data Exchange (ETDEWEB)

Gan Lin E-mail: lin.gan@cicero.uio.no

2003-05-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis.

Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

International Nuclear Information System (INIS)

Gan Lin

2003-01-01

This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis

New perspectives for advanced automobile diesel engines

Science.gov (United States)

Tozzi, L.; Sekar, R.; Kamo, R.; Wood, J. C.

1983-01-01

Computer simulation results are presented for advanced automobile diesel engine performance. Four critical factors for performance enhancement were identified: (1) part load preheating and exhaust gas energy recovery, (2) fast heat release combustion process, (3) reduction in friction, and (4) air handling system efficiency. Four different technology levels were considered in the analysis. Simulation results are compared in terms of brake specific fuel consumption and vehicle fuel economy in km/liter (miles per gallon). Major critical performance sensitivity areas are: (1) combustion process, (2) expander and compressor efficiency, and (3) part load preheating and compound system. When compared to the state of the art direct injection, cooled, automobile diesel engine, the advanced adiabatic compound engine concept showed the unique potential of doubling the fuel economy. Other important performance criteria such as acceleration, emissions, reliability, durability and multifuel capability are comparable to or better than current passenger car diesel engines.

Fundamental study of manganese dioxide for catalytic recombustion of exhaust gas of motor car

Energy Technology Data Exchange (ETDEWEB)

Shimoyamada, T

1974-01-01

The catalytic activities of five manganese dioxide preparations were tested in a pulse reactor to assess their carbon monoxide-oxidizing capability in relation to the catalytic afterburning of automobile exhaust gases. Catalysts prepared from manganese sulfate showed diminished catalytic activity as a result of sulfate poisoning. Higher oxidation activity was obtained with a catalyst prepared by precipitating the permanganate salt in acidic solution. Two forms of carbon monoxide adsorption were demonstrated, each with a characteristic activation energy and reaction temperature.

Toxicity of power vehicles exhaust gases using bio fuels of different composition

International Nuclear Information System (INIS)

Kalnins, I.; Berjoza, D.

2003-01-01

The aim of the work is to state the influence of different bio fuels on the surrounding environment using them in diesel motors. The work summarises information on the composition of toxic components in vehicle exhaust gases, their influence on the surrounding environment. Characteristic features of different biofuels are summarised as well as their application possibilities in diesel motors. Measuring devices and measuring methods of toxic components of exhaust gases have been classified. Different measuring regimes of diesel motor exhaust gases have been described. Research in automobile Renault, equipped with diesel motor, exhaust gas smokiness using different biofuels has been carried out (author)

Simulation on Toxic Gases in Vehicle Exhaust Equipped with Modified Catalytic Converter : A Review

Directory of Open Access Journals (Sweden)

Leman A.M.

2016-01-01

Full Text Available Air pollution and global warming is a major issue nowadays. One of the main contributors to be the emission of harmful gases produced by vehicle exhausts lines. The harmful gases like NOx, CO, unburned HC and particulate matter increases the global warming, so catalytic converter plays a vital role in reducing harmful gases. Catalytic converters are used on most vehicles on the road today. This research deals with the gas emission flow in the catalytic converter involving the heat transfer, velocity flow, back pressure and others chemical reaction in the modified catalytic converter by using FeCrAl as a substrate that is treated using the ultrasonic bath and electroplating techniques. The objective of this study is to obtain a quantitative description of the gas emission in the catalytic converter system of automobile exhaust gas using ANSYS Software. The description of the gas emission in the catalytic converter system of automobile exhaust gas using ANSYS Software was simulated in this research in order to provide better efficiency and ease the reusability of the catalytic converter by comparing experimental data with software analysing data. The result will be expected to demonstrate a good approximation of gas emission in the modified catalytic converter simulation data compared to experimental data in order to verify the effectiveness of modified catalytic converter. Therefore studies on simulation of flow through the modified catalytic converter are very important to increase the accuracy of the obtained emission result.

Environmental implications of alternative-fueled automobiles: Air quality and greenhouse gas tradeoffs

International Nuclear Information System (INIS)

MaClean, H.L.; Lave, L.B.

2000-01-01

The authors analyze alternative fuel-powerstrain options for internal combustion engine automobiles. Fuel/engine efficiency, energy use, pollutant discharges, and greenhouse gas emissions are estimated for spark and compression ignited, direct injected (DI), and indirect injected (II) engines fueled by conventional and reformulated gasoline, reformulated diesel, compressed natural gas (CNG), and alcohols. Since comparisons of fuels and technologies in dissimilar vehicles are misleading, the authors hold emissions level, range, vehicle size class, and style constant. At present, CNG vehicles have the best exhaust emissions performance while DI diesels have the worst. Compared to a conventional gasoline fueled II automobile, greenhouse gases could be reduced by 40% by a DI CNG automobile and by 25% by a DI diesel. Gasoline- and diesel-fueled automobiles are able to attain long ranges with little weight or fuel economy penalty. CNG vehicles have the highest penalty for increasing range, due to their heavy fuel storage systems, but are the most attractive for a 160-km range. DI engines, particularly diesels, may not be able to meet strict emissions standards, at least not without lowering efficiency

The construction of a Danish automobile culture

DEFF Research Database (Denmark)

Wagner, Michael

The aim of this article is to discuss the way the automobile was introduced and promoted as a vehicle for modern leisure life in Denmark 1900-1970., and to demonstrate how automobilism was constructed around an ideology of consumption for leisure and recreation....

Promotion Models and Achievements of New-energy Automobiles in Shenzhen

Science.gov (United States)

Cai, Yu; Xiong, Siqin; Bai, Bo; Ma, Xiaoming

2017-08-01

As one of the pilot cities in China for demonstration and promotion of new-energy automobiles, Shenzhen, driven by the “two engines” of the government and the market, has made swift progress in promotion of its new-energy automobiles. This paper analyses Shenzhen’s governmental promotion policy concerning new-energy automobiles, summarizes Shenzhen’s commercial models for promoting new-energy automobiles, and is expected to provide reference for other provinces and cities to promote new-energy automobiles.

Advice of the Italian CCTN on the health risk assessment relative to exposure to automobile emissions

Energy Technology Data Exchange (ETDEWEB)

Camoni, I [ed.; Istituto Superiore di Sanita` , Rome (Italy). Lab. di Tossicologia Applicata; Mucci, N [ed.; ISPESL, Monteporzio Catone, Roma (Italy). Dip. di Medicina del Lavoro; Foa` , V [ed.; Milan Univ. (Italy). Clinica del lavoro Luigi Devoto

1998-06-01

The period 1990-1995 are reported, they concern the health impact of exposure to benzene and polycyclic aromatic hydrocarbons (PAHs), resulting from automobile exhaust products, for Italian general and occupationally exposed populations. The first recommendation takes into consideration the possible long-term effects of the unleaded gasoline, recently introduced in Italy. The latter two recommendations concern the quantitative evaluation of the risk of leukaemia and of the risk of lung cancer from exposure to benzene and PAHs, resulting from automobile exhaust. [Italiano] Sono riportati i pareri espressi dalla Commissione Consultiva Tossicologica Nazionale (CCTN) nel periodo 1990-1995 riguardanti la valutazione del rischio cancerogeno per esposizione a sostanze contenute nelle emissioni autoveicolari. In particolare, viene stimato il rischio aggiuntivo di leucemia per esposizione a benzene e di cancro polmonare per esposizione a idrocarburi policiclici aromatici (IPA), sia per la popolazione generale che per quella professionalmente esposta.

Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems

Directory of Open Access Journals (Sweden)

Mostofa Kamal Nasir

2014-01-01

Full Text Available Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO, hydrocarbons (HC, carbon dioxide (CO2, particulate matter (PM, and oxides of nitrogen (NOx. Intelligent transport system (ITS technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment.

Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems

Science.gov (United States)

Nasir, Mostofa Kamal; Md Noor, Rafidah; Kalam, M. A.; Masum, B. M.

2014-01-01

Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), particulate matter (PM), and oxides of nitrogen (NOx). Intelligent transport system (ITS) technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment. PMID:25032239

Reduction of fuel consumption and exhaust pollutant using intelligent transport systems.

Science.gov (United States)

Nasir, Mostofa Kamal; Md Noor, Rafidah; Kalam, M A; Masum, B M

2014-01-01

Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), particulate matter (PM), and oxides of nitrogen (NO x ). Intelligent transport system (ITS) technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment.

Physico-chemical and optical properties of combustion-generated particles from coal-fired power plant, automobile and ship engine and charcoal kiln.

Science.gov (United States)

Kim, Hwajin

2015-04-01

Similarities and differences in physico-chemical and optical properties of combustion generated particles from various sources were investigated. Coal-fired power plant, charcoal kiln, automobile and ship engine were major sources, representing combustions of coal, biomass and two different types of diesel, respectively. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDX) equipped with both SEM and HRTEM were used for physico-chemical analysis. Light absorbing properties were assessed using a spectrometer equipped with an integrating sphere. Particles generated from different combustion sources and conditions demonstrate great variability in their morphology, structure and composition. From coal-fired power plant, both fly ash and flue gas were mostly composed of heterogeneously mixed mineral ash spheres, suggesting that the complete combustion was occurred releasing carbonaceous species out at high temperature (1200-1300 °C). Both automobile and ship exhausts from diesel combustions show typical features of soot: concentric circles comprised of closely-packed graphene layers. However, heavy fuel oil (HFO) combusted particles from ship exhaust demonstrate more complex compositions containing different morphology of particles other than soot, e.g., spherical shape of char particles composed of minerals and carbon. Even for the soot aggregates, particles from HFO burning have different chemical compositions; carbon is dominated but Ca (29.8%), S (28.7%), Na(1%), and Mg(1%) are contained, respectively which were not found from particles of automobile emission. This indicates that chemical compositions and burning conditions are significant to determine the fate of particles. Finally, from biomass burning, amorphous and droplet-like carbonaceous particles with no crystallite structure are observed and they are generally formed by the condensation of low volatile species at low

Credit constraints, consumer leasing and the automobile replacement decision

OpenAIRE

Kathleen W. Johnson

1999-01-01

This paper presents a model of consumer automobile replacement in the presence of leasing. The model incorporates credit constraints to distinguish between the leasing and purchasing options. It demonstrates how leasing increases the probability that a household replaces its automobile and how households that lease choose higher quality automobiles. The qualitative choice model of the household's decision to lease provides support for the observation that households that lease face credit con...

Report for fiscal 1998 on feasibility study for introduction of electric automobiles; 1998 nendo denki jidosha donyu kanosei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Surveys have been made on the characteristics of environmentally harmonizing automobiles, and the status of development and introduction thereof inside and outside the country. Discussions were given on the possibility of introducing electric automobiles in Japan. In developing environmentally harmonizing automobiles in Japan, works have been executed on low pollution type components such as lean burn engines, electric automobiles, gasoline engine and electric motor hybrid cars, methanol fueled cars, and fuel cell automobiles. Some of them are already in use in spite of their high price. In America, a cooperation project for the next generation cars has been implemented by mobilizing industrial, academic and governmental organizations. Based on the achievements thereof, the car makers have announced their original advanced cars respectively. In the EU, development of low exhaust gas cars and zero emission cars is being carried out jointly by the related industries setting years 2003 to 2005 as the target. An urban type traffic system utilizing electric vehicles, and a traffic system dividing movements of short distance and long distance are proposed as the means to introduce the future electric automobiles. (NEDO)

Code Recognition Device for Automobile, a Panacea for Automobiles Theft

Directory of Open Access Journals (Sweden)

Ozomata David AHMED

2011-06-01

Full Text Available Code Recognition Device is a security device for automobiles. It responds only to the right sequence of codes that are keyed from the key pad. This closes the electrical circuitry of the automobile and enables it to start. If a wrong key is touched, it resets the device which disengages the electrical circuit of the automobile from the power supply. The device works properly on closing all the doors of the automobile, otherwise it cannot start. Also, once the automobile is in operation, opening of any door will disengage the device and the engine will stop. To restart the engine, the doors must be closed and the codes rendered sequentially-in this case the codes are 1974.

Recovery of Exhaust Waste Heat for ICE Using the Beta Type Stirling Engine

OpenAIRE

Aladayleh, Wail; Alahmer, Ali

2015-01-01

This paper investigates the potential of utilizing the exhaust waste heat using an integrated mechanical device with internal combustion engine for the automobiles to increase the fuel economy, the useful power, and the environment safety. One of the ways of utilizing waste heat is to use a Stirling engine. A Stirling engine requires only an external heat source as wasted heat for its operation. Because the exhaust gas temperature may reach 200 to 700°C, Stirling engine will work effectively....

Numerical and experimental analysis for exhaust heat exchangers in automobile thermoelectric generators

Directory of Open Access Journals (Sweden)

Shengqiang Bai

2014-11-01

Full Text Available Ideal heat exchangers recover as much heat as possible from an engine exhaust at the cost of an acceptable pressure drop. They provide primary heat for a thermoelectric generator (TEG, and their capacity and efficiency is dependent on the material, shape, and type of the heat exchanger. Six different exhaust heat exchangers were designed within the same shell, and their computational fluid dynamics (CFD models were developed to compare heat transfer and pressure drop in typical driving cycles for a vehicle with a 1.2 L gasoline engine. The result showed that the serial plate structure enhanced heat transfer by 7 baffles and transferred the maximum heat of 1737 W. It also produced a maximum pressure drop of 9.7 kPa in a suburban driving cycle. The numerical results for the pipe structure and an empty cavity were verified by experiments. Under the maximum power output condition, only the inclined plate and empty cavity structure undergoes a pressure drop less than 80 kPa, and the largest pressure drop exceeds 190 kPa. In this case, a mechanism with a differential pressure switch is essential to bypass part of the exhaust.

A comparative study of the effect of automobile pollution on pulmonary function tests of people who reside in high traffic density urban areas and relatively traffic free rural areas

Directory of Open Access Journals (Sweden)

Amrith Pakkala

2014-01-01

Full Text Available Background: Motor vehicle emissions constitute the most significant source of ultra particles in an urban environment. Traffic related air pollution is an occupational health hazard to individuals who live and work in an environment close to traffic. The present study intends to study the effect of air pollution on the pulmonary system in people who reside in areas exposed to automobile exhaust. Material and Methods: This study was conducted by performing pulmonary function tests (PFT on 20 people who are exposed to automobile exhaust by virtue of their residence nearer to traffic junctions and comparing them with 20 others of age and gender matched and similar anthropometric profile people, who reside in a rural setting free from vehicular air pollution. Statistical analysis was done by Student′s t-test (two-tailed, independent for inter group analysis. Results: There was a statistically significant difference between the two groups as far as parameters like FVC, FEV 1 , PEFR, FEV 1 /FVC, FEF 25-75% . It can be seen that there is decline in dynamic pulmonary function parameters in the study group when compared to controls, which is statistically significant. Conclusion: The respiratory system are particulate matter (PM 10 and sulphur dioxide (SO 2 produced by the combustion of fossil fuels. These pollutants react with each other, forming hazardous acid sulfate particles, which are capable of reaching deep inside the tracheo-bronchial tree producing a bronchoconstrictor response, as their predominant site of action are the small airways. This was a comparative study to demonstrate the effect of air pollution due to automobile exhaust on pulmonary functions of people who reside in areas exposed to a polluted urban environment with a similar group in the rural relatively pollution free environment.

Using date stone charcoal as a filtering medium for automobile exhaust gases

Energy Technology Data Exchange (ETDEWEB)

Shahad, H.A.K.; Farhan, A.M. [University of Babylon (Iraq). College of Engineering; Saleh, H.A. [University of Babylon (Iraq). Dept. of Chemistry

1998-12-31

A thermal reactor was designed and built to produce coal from date stones by pyrolysis. Five specimens of coal have been prepared at different maximum charring temperatures. It was found that, as the temperature increases, the properties of coal are improved (the percentage of carbon content increases). It was also found that, at 700{sup o}C, the percentage of carbon content remains constant. The coal prepared at this temperature was used as a filtering medium in an adsorption filter to purify the exhaust gases of a two stroke spark ignition engine. The results showed that the filter has a high adsorption ability for CO and CO{sub 2} gases. An ORSAT apparatus was used to measure the concentration of CO and CO{sub 2} in the exhaust gases before and after the filter. The filter reduced the concentration of CO and CO{sub 2} by 62 and 59%, respectively. (author)

Optimization of Thermoelectric Components for Automobile Waste Heat Recovery Systems

Science.gov (United States)

Kumar, Sumeet; Heister, Stephen D.; Xu, Xianfan; Salvador, James R.

2015-10-01

For a typical spark ignition engine approximately 40% of available thermal energy is lost as hot exhaust gas. To improve fuel economy, researchers are currently evaluating technology which exploits exhaust stream thermal power by use of thermoelectric generators (TEGs) that operate on the basis of the Seebeck effect. A 5% improvement in fuel economy, achieved by use of TEG output power, is a stated objective for light-duty trucks and personal automobiles. System modeling of thermoelectric (TE) components requires solution of coupled thermal and electric fluxes through the n and p-type semiconductor legs, given appropriate thermal boundary conditions at the junctions. Such applications have large thermal gradients along the semiconductor legs, and material properties are highly dependent on spatially varying temperature profiles. In this work, one-dimensional heat flux and temperature variations across thermoelectric legs were solved by using an iterative numerical approach to optimize both TE module and TEG designs. Design traits were investigated by assuming use of skutterudite as a thermoelectric material with potential for automotive applications in which exhaust gas and heat exchanger temperatures typically vary from 100°C to over 600°C. Dependence of leg efficiency, thermal fluxes and electric power generation on leg geometry, fill fractions, electric current, thermal boundary conditions, etc., were studied in detail. Optimum leg geometries were computed for a variety of automotive exhaust conditions.

Neutron activation analysis of automobile exhaust pollutants

International Nuclear Information System (INIS)

Oakes, T.W.; Furr, A.K.; Adair, D.J.; Parkinson, T.F.

1977-01-01

An approximation of the distribution of lead particulate from vehicular exhausts is given. Soil and grass (Poa trivialis) samples were collected at five-foot intervals from the roadside out to 300 feet, at ten-foot intervals from 300 to 350 feet, and at 25-foot intervals from 350 to 600 feet. All samples were irradiated twice: once for a brief period of from 10 to 120 seconds and later for periods of from 6 to 8 hours. The short irradiations were at a thermal neutron flux of 1.2x10 12 ncm -2 sec -1 (decay time=1 min, counting time=8 min). The long irradiations were at a thermal neutron flux of 1.3x10 12 ncm -2 sec -1 , and the samples counted twice at decay intervals of two days and twelve days. The counting intervals were one hour. The spectra were stored on magnetic tape for processing by an IBM 370/158 computer. This initial neutron-activation analysis study has shown that there is an extremely detailed pattern of the effluent from vehicular highway traffic which is strongly affected by micrometeorological conditions. In order to detect these patterns it is necessary to use a very compact sample grid with every possible precaution taken to ensure sample homogeneity and cleanliness. A possibility of elevated levels of pollution may exist at considerable distances from the highway, perhaps even greater than at the immediate roadside. (T.G.)

Recovery of Exhaust Waste Heat for ICE Using the Beta Type Stirling Engine

Directory of Open Access Journals (Sweden)

Wail Aladayleh

2015-01-01

Full Text Available This paper investigates the potential of utilizing the exhaust waste heat using an integrated mechanical device with internal combustion engine for the automobiles to increase the fuel economy, the useful power, and the environment safety. One of the ways of utilizing waste heat is to use a Stirling engine. A Stirling engine requires only an external heat source as wasted heat for its operation. Because the exhaust gas temperature may reach 200 to 700°C, Stirling engine will work effectively. The indication work, real shaft power and specific fuel consumption for Stirling engine, and the exhaust power losses for IC engine are calculated. The study shows the availability and possibility of recovery of the waste heat from internal combustion engine using Stirling engine.

32 CFR 220.11 - Special rules for automobile liability insurance and no-fault automobile insurance.

Science.gov (United States)

2010-07-01

... and no-fault automobile insurance. 220.11 Section 220.11 National Defense Department of Defense... insurance and no-fault automobile insurance. (a) Active duty members covered. In addition to Uniformed.... 1095 and this part. (c) Exclusion of automobile liability insurance and no-fault automobile insurance...

Perspectives of Biogas Conversion into Bio-CNG for Automobile Fuel in Bangladesh

Directory of Open Access Journals (Sweden)

M. S. Shah

2017-01-01

Full Text Available The need for liquid and gaseous fuel for transportation application is growing very fast. This high consumption trend causes swift exhaustion of fossil fuel reserve as well as severe environment pollution. Biogas can be converted into various renewable automobile fuels such as bio-CNG, syngas, gasoline, and liquefied biogas. However, bio-CNG, a compressed biogas with high methane content, can be a promising candidate as vehicle fuel in replacement of conventional fuel to resolve this problem. This paper presents an overview of available liquid and gaseous fuel commonly used as transportation fuel in Bangladesh. The paper also illustrates the potential of bio-CNG conversion from biogas in Bangladesh. It is estimated that, in the fiscal year 2012-2013, the country had about 7.6775 billion m3 biogas potential equivalent to 5.088 billion m3 of bio-CNG. Bio-CNG is competitive to the conventional automobile fuels in terms of its properties, economy, and emission.

Les possibilités de limitation des émissions de plomb par les véhicules automobiles Possibilities of Limiting Leaded Exhaust from Automotive Vehicles

Directory of Open Access Journals (Sweden)

Roth J.

2006-11-01

Full Text Available Les additifs plombés permettent de satisfaire les besoins en octane des moteurs automobiles actuels. Dans le cadre de la lutte contre la pollution automobile, il est envisagé de réduire ou de supprimer le plomb présent dans les carburants. La suppression brutale, tout en présentant certains avantages, entraîne de nombreux inconvénients, d'ordre purement technique mais également d'ordre financier. La mise au point d'un dispositif de captation, par les sociétés Texaco et Octel, semble permettre d'envisager de maintenir la présence de plomb dans les carburants, tout en réduisant les émissions à l'échappement. Les travaux effectués à l'UTAC ont permis de tester ces dispositifs sur une endurance de 31 000 km. Les résultats obtenus ont permis de dégager un gain d'efficacité d'environ 60 %, les paramètres, bruit et pollution (CO et HC restant par ailleurs inchangés. Leaded additives enable the octane requirements of existing automotive engines to be satisfied. However, as part of the fight against automotive pollution, plans are being drawn up to reduce or eliminate the lead present in fuels. A sudden elimination, although having some advantages, would create a great many disadvantages of a purely technical as well as financiel nature. Texaco and Octet have developed a trapping device that appears to enable lead to be retained in fuels at the same time as reducing exhaust emissions. This device has undergone a 31,000-kilometer endurance test at UTAC. The results reveal an efficiency gain of 60 %, while the noise and pollution (CO and HC parameters remain the same.

Wind power demonstration and siting problems. [for recharging electrically driven automobiles

Science.gov (United States)

Bergey, K. H.

1973-01-01

Technical and economic feasibility studies on a small windmill to provide overnight charging for an electrically driven car are reported. The auxiliary generator provides power for heating and cooling the vehicle which runs for 25 miles on battery power alone, and for 50 miles with the onboard charger operating. The blades for this windmill have a diameter of 12 feet and are coupled through to a conventional automobile alternator so that they are able to completely recharge car batteries in 8 hours. Optimization of a windmill/storage system requires detailed wind velocity information which permits rational sitting of wind power system stations.

Okoliš i automobil

Directory of Open Access Journals (Sweden)

Nada Štrumberger

2012-10-01

Full Text Available Constant increase of the number of automobiles causes demand for individual materials to get on the rise, thus giving an impulse to the development of recycling logistics. Used automobiles get disassembled and individual parts which can be used as raw materials or additives get recycled. Automobile tires can be reclaimed or vulcanized. In July 1978 the environmental-friendly "Blauer Engel" or "Blue Angel" symbol was first introduced for reclaimed tires. Later, emblems were introduced for other recycled automobile pans. The awarding of the emblem is being controlled and approved by authorized institutes, because the emblem rightfully designates traffic safety.

Exposure assessment in studies on health effects of traffic exhaust

Energy Technology Data Exchange (ETDEWEB)

Setaelae, S. [Association for the Pulmonary Disabled, Helsinki (Finland); Jaakkola, J.J.K. [Helsinki Univ. (Finland). Dept. of Public Health

1995-12-31

A main source of outdoor air pollution is road traffic, which produces a complex mixture of nitrogen oxides, carbon monoxide, volatile hydrocarbons, airborne particles and some other compounds. Traffic exhaust affects also the concentrations of ozone and other photo chemical oxidants. In earlier studies those components have had remarkable health effects. Several studies on occupational exposure to automobile exhaust have been published and several studies have been observed an association between both outdoor and indoor pollutant levels and health outcomes. However, there are only a few epidemiological studies in which traffic exhaust, a complex mixture, has been studied in its entirety. During recent years, interesting epidemiological studies of the health effects of this complex mixture have been published. Human exposure assessment for traffic exhaust can be categorized according to the environment of exposure (indoors, outdoors, in-traffic) or to the method of exposure assessment (direct or indirect methods). In this presentation the methods are further categorized into (1) traffic activity, (2) air concentration measurements, and (3) dispersion models, in order to better understand the advantages and disadvantages of different approaches. The objective of this presentation is to make a critical review of exposure assessments in the epidemiological studies on health effects of traffic exhaust. (author)

Exposure assessment in studies on health effects of traffic exhaust

Energy Technology Data Exchange (ETDEWEB)

Setaelae, S [Association for the Pulmonary Disabled, Helsinki (Finland); Jaakkola, J J.K. [Helsinki Univ. (Finland). Dept. of Public Health

1996-12-31

A main source of outdoor air pollution is road traffic, which produces a complex mixture of nitrogen oxides, carbon monoxide, volatile hydrocarbons, airborne particles and some other compounds. Traffic exhaust affects also the concentrations of ozone and other photo chemical oxidants. In earlier studies those components have had remarkable health effects. Several studies on occupational exposure to automobile exhaust have been published and several studies have been observed an association between both outdoor and indoor pollutant levels and health outcomes. However, there are only a few epidemiological studies in which traffic exhaust, a complex mixture, has been studied in its entirety. During recent years, interesting epidemiological studies of the health effects of this complex mixture have been published. Human exposure assessment for traffic exhaust can be categorized according to the environment of exposure (indoors, outdoors, in-traffic) or to the method of exposure assessment (direct or indirect methods). In this presentation the methods are further categorized into (1) traffic activity, (2) air concentration measurements, and (3) dispersion models, in order to better understand the advantages and disadvantages of different approaches. The objective of this presentation is to make a critical review of exposure assessments in the epidemiological studies on health effects of traffic exhaust. (author)

FY 1999 report on the results of the study to support the commercialization of recycling technology, etc. 4. R and D for enhancement of automobile fuel consumption/exhaust gas technology; 1999 nendo recycle gijutsu nado jitsuyoka shien kenkyu seika hokokusho. 4. Jidosha nenpi hai gas gijutsu kodoka kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of clarifying measures for reducing fuel consumption and exhaust gas of automobiles, survey was made of effects of environmental temperatures and fuel properties on exhaust gas. In the survey of effects of environmental temperatures, experiment on exhaust gas was carried out by changing the laboratory temperature from 5 degrees C to 35 degrees C using direct injection gasoline engine. As a result, it was found out that environmental temperatures have effects exhaust gas according to changes in purification rate by rise in catalytic temperature, changes in air/fuel ratio by changes in air density, control methods to secure starting-up/drivability, etc. In the survey of effects of gasoline properties, study was made on effects of distillation properties, especially, 90% distillation temperature (T90) on exhaust gas. As a result, in 10(center dot)15 mode, CO and THC decreased with a decrease in T90 both in three-way catalytic car and direct injection car. Especially, CO decreased to about 1/4 when decreasing T90 from 151 degrees C to 116 degrees C. NOx increased in three-way catalytic car and decreased in direct injection car with a decrease in T90. (NEDO)

Animals afflicted with lead poisoning from motor exhaust

Energy Technology Data Exchange (ETDEWEB)

Scheel-Thomsen, A

1956-01-01

Three cases of dogs treated for ulcerous conditions of the oral cavity and a trembling of the limbs, which were eventually discovered to be lead poisoning derived from constant exposure to gasoline and automotive exhaust, are reported. The first case, typical of all three, was first treated in April 1951. The lesions healed after a stay in the hospital but recurred after he returned home. The dog was also asymptomatic when at the owner's summer home for any length of time. It was discovered that at his winter home the dog spent much of his time around a large automobile garage. After treatment with Antoxol (dimercaprol) and benzyl benzoate, he recovered and had no more symptoms of lead poisoning until his death from cancer several years later. Each of the three involved an animal whose daily activities exposed him to the continual presence of gasolines and exhaust fumes containing tetraethyl lead.

Automobile Tire Assessment: A Multi-Criteria Approach

Directory of Open Access Journals (Sweden)

Ateekh-Ur-Rehman

2017-02-01

Full Text Available In response to the present dynamic market, automobile manufacturing industries are constantly evaluating and improving their manufacturing strategies to stay competitive. It is also evident that they evaluate those strategies considering multiple criteria. In one such case, an automobile project manager has to ensure that the selected tire (among the available alternatives complies with the prospective automobile’s performance. This paper presents an approach for the assessment of alternative automobile tires taking into account multiple criteria, such as tire sustainability, tire road performance, environmental issues, tire purchase cost and tire road grip. The presented approach is quite helpful to any decision maker who is interested not only in ranking alternatives but also in establishing the superiority of an alternative over others. The approach also helps to specify the position of each alternative with respect to ideal solution. A case illustration is used to demonstrate an application of the approach.

Automobiles and environment - also an economic problem. Kraftfahrzeug und Umwelt - auch ein oekonomisches Problem

Energy Technology Data Exchange (ETDEWEB)

Mager, N

1981-01-01

The proliferation of cars since the early 60's and the resulting increasing spatial mobility have contributed to a considerable rise of wealth in economies based on the division of labour, it also had an influence on the creation of new or extension of existing areas of liberty. These undisputably positive effects are of the widerspread private use of cars are correlated with harmful effects on our environment. In some areas they have increased so much as to necessitate when more intensive efforts are in order to reduce pollution. The present thesis aims at describing and discussing the economic problems connected with exhaust gas control. A comprehensive economic analysis of the enviromental damages caused by automobiles and of the corresponding counterstrategies of ecologic policy must by based on the state of pollution existing in reality. The thesis therefore starts with a brief survey on the effective pollution caused by road traffic and automobiles in the Federal Republic of Germany.

Automobile air-conditioning its energy and environmental impact; La climatisation automobile impact energetique et environnemental

Energy Technology Data Exchange (ETDEWEB)

Barbusse, St.; Gagnepain, L.

2003-05-01

Over the last three decades, automobile manufacturers have made a lot of progress in specific fuel consumption and engine emissions of pollutants. Yet the impact of these improvements on vehicle consumption has been limited by increased dynamic performances (maxi-mum speed, torque), increased safety (power steering and power brakes) and increased comfort (noise and vibration reduction, electric windows and thermal comfort). Because of this, the real CO{sub 2}-emission levels in vehicles is still high in a context where road transport is a major factor in the balance sheet of greenhouse gas emissions, thus in complying with the inter-national climate convention. Although European, Japanese and Korean manufacturers signed an important agreement with the European Commission for voluntarily reducing CO{sub 2} emissions from their vehicles, with a weighted average emission goal by sales of 140 grams per km on the MVEG approval cycle by 2008, it has to be noted that the European procedures for measuring fuel consumption and CO{sub 2} emissions do not take accessories into account, especially air-condition ng (A/C). The big dissemination of this equipment recognized as a big energy consumer and as using a refrigerant with a high global warming potential ed ADEME to implement a set of assessments of A/C's energy and environmental impact. In particular these assessments include studies of vehicle equipment rates, analyses of impact on fuel consumption as well as regulated pollutant emissions in the exhaust, a characterization of the refrigerant leakage levels and an estimate of greenhouse gas emissions for all air-conditioned vehicles. This leaflet summarizes the results of these actions. All of these studies and additional data are presented in greater detail in the document,-'Automobile Air-conditioning' (ADEME reference no. 4985). (author)

Study on heat pipe assisted thermoelectric power generation system from exhaust gas

Science.gov (United States)

Chi, Ri-Guang; Park, Jong-Chan; Rhi, Seok-Ho; Lee, Kye-Bock

2017-11-01

Currently, most fuel consumed by vehicles is released to the environment as thermal energy through the exhaust pipe. Environmentally friendly vehicle technology needs new methods to increase the recycling efficiency of waste exhaust thermal energy. The present study investigated how to improve the maximum power output of a TEG (Thermoelectric generator) system assisted with a heat pipe. Conventionally, the driving energy efficiency of an internal combustion engine is approximately less than 35%. TEG with Seebeck elements is a new idea for recycling waste exhaust heat energy. The TEG system can efficiently utilize low temperature waste heat, such as industrial waste heat and solar energy. In addition, the heat pipe can transfer heat from the automobile's exhaust gas to a TEG. To improve the efficiency of the thermal power generation system with a heat pipe, effects of various parameters, such as inclination angle, charged amount of the heat pipe, condenser temperature, and size of the TEM (thermoelectric element), were investigated. Experimental studies, CFD simulation, and the theoretical approach to thermoelectric modules were carried out, and the TEG system with heat pipe (15-20% charged, 20°-30° inclined configuration) showed the best performance.

[Ultrafine particle number concentration and size distribution of vehicle exhaust ultrafine particles].

Science.gov (United States)

Lu, Ye-qiang; Chen, Qiu-fang; Sun, Zai; Cai, Zhi-liang; Yang, Wen-jun

2014-09-01

Ultrafine particle (UFP) number concentrations obtained from three different vehicles were measured using fast mobility particle sizer (FMPS) and automobile exhaust gas analyzer. UFP number concentration and size distribution were studied at different idle driving speeds. The results showed that at a low idle speed of 800 rmin-1 , the emission particle number concentration was the lowest and showed a increasing trend with the increase of idle speed. The majority of exhaust particles were in Nuclear mode and Aitken mode. The peak sizes were dominated by 10 nm and 50 nm. Particle number concentration showed a significantly sharp increase during the vehicle acceleration process, and was then kept stable when the speed was stable. In the range of 0. 4 m axial distance from the end of the exhaust pipe, the particle number concentration decayed rapidly after dilution, but it was not obvious in the range of 0. 4-1 m. The number concentration was larger than the background concentration. Concentration of exhaust emissions such as CO, HC and NO showed a reducing trend with the increase of idle speed,which was in contrast to the emission trend of particle number concentration.

Consumer preferences for automobile energy-efficiency grades

International Nuclear Information System (INIS)

Koo, Yoonmo; Kim, Chang Seob; Hong, Junhee; Choi, Ie-Jung; Lee, Jongsu

2012-01-01

Recently, increases in energy prices have made energy conservation and efficiency improvements even more essential than in the past. However, consumers experience difficulty in obtaining reliable information regarding energy efficiency, so that many countries have implemented regulations to enforce energy-efficiency grade labeling. In this study, consumer preferences regarding energy efficiency grades are analyzed by the mixed logit and MDCEV model based on the revealed preference data of past automobile purchases. Findings show that consumers rationally apply information on energy efficiency grades when purchasing automobiles. However, they tend to show inefficiency in automobile usage patterns. This study discusses political implications of energy efficiency policies as they might impact consumer behaviors of automobile purchase and usage. - Highlights: ► We model discrete choice model to evaluate energy-efficiency grade regulation. ► Consumers apply information on energy efficiency grades when purchasing automobiles. ► However, they tend to show inefficiency in automobile usage patterns. ► The policies for efficient automobile usage are discussed.

Mass spectral chemical fingerprints reveal the molecular dependence of exhaust particulate matters on engine speeds.

Science.gov (United States)

Li, Yi; Zhang, Hua; Zhao, Zongshan; Tian, Yong; Liu, Kun; Jie, Feifan; Zhu, Liang; Chen, Huanwen

2018-05-01

Particulate matters (PMs) emitted by automobile exhaust contribute to a significant fraction of the global PMs. Extractive atmospheric pressure chemical ionization mass spectrometry (EAPCI-MS) was developed to explore the molecular dependence of PMs collected from exhaust gases produced at different vehicle engine speeds. The mass spectral fingerprints of the organic compounds embedded in differentially sized PMs (e.g., 0.22-0.45, 0.45-1.00, 1.00-2.00, 2.00-3.00, 3.00-5.00, and 5.00-10.00μm) generated at different engine speeds (e.g., 1000, 1500, 2000, 2500, and 3000r/min) were chemically profiled in the mass range of mass to charge ratio (m/z) 50-800. Organic compounds, including alcohols, aldehydes, and esters, were detected in all the PMs tested, with varied concentration levels for each individual PM sample. At relatively low engine speeds (≤1500r/min), the total amount of organic species embedded in PMs of 0.22-1.00μm was greater than in PMs of other sizes, while more organic species were found in PMs of 5.00-10.00μm at high engine speeds (≥3000r/min), indicating that the organic compounds distributed in different sizes of PMs strongly correlated with the engine speed. The experimental data showed that the EAPCI-MS technique enables molecular characterization of PMs in exhaust, revealing the chemical dependence of PMs on the engine speeds (i.e., the combustion conditions) of automobiles. Copyright © 2017. Published by Elsevier B.V.

STRATEGIC ENTREPRENEURSHIP: A CASE IN THE BRAZILIAN AUTOMOBILE INDUSTRY

Directory of Open Access Journals (Sweden)

Afonso Carneiro Lima

2010-07-01

Full Text Available This work addresses an entrepreneurial phenomenon of strategic administration within the automobile industry: the creation of the automaker Troller Veículos Especiais (TVE. The case study at hand is justified by the positioning of this company around two market niches and its relative success in an industry characterized by few and powerful players. Our aim was to analyze the entrepreneurial and strategic process of discovering opportunity, the analysis used for internal and external factors, and the adoption of its strategic positioning in exploring two automobile market niches: in the B2B market, vehicles adapted to specific operational functions; and in the B2C, off-road vehicles with a strong appeal to consumers’ life styles. This case study allowed us to visualize the challenging path of a genuinely Brazilian small company in a sector dominated by large multinational groups, besides demonstrating decision-related dilemmas and aspects related to managerial creativity.Key-words: Automobile industry. Case study. Strategic entrepreneurship. Discovery theory. Strategic positioning.

A comparative study of the effect of automobile pollution on pulmonary function tests of exposed cab drivers

Directory of Open Access Journals (Sweden)

Amrith Pakkala

2013-01-01

Full Text Available Background: Urbanization is associated with an enormous increase in vehicular traffic emitting exhausts and polluting the atmosphere. Emissions from vehicular traffic constitute the most significant source of ultraparticle in an urban environment. Cab drivers who work near areas located in the vicinity of traffic junctions through which maximum number of vehicles passes are more prone to develop health issues pertaining to the respiratory system. The effect of this occupational hazard in this unorganised workforce is not adequately studied. This study is designed to determine the effect of air pollution on the pulmonary system in cab drivers exposed to automobile exhaust. Materials and Methods: This study was conducted by performing pulmonary function tests (PFTs on 20 cab drivers who are exposed to automobile exhaust by virtue of their work venue nearer to traffic junctions and comparing them with 20 age, gender-matched, and anthropometric profile cab drivers who work in a rural setting free from vehicular air pollution. PFT by computerized spirometer measuring forced vital capacity (FVC, forced expiratory volume (FEV 1 , FEV1/FVC, peak expiratory flow rate (PEFR, and forced expiratory flow (FEF 25%-75% were measured. Statistical analysis was done by Student′s t test (two-tailed, independent for intergroup analysis. Results: There was a statistically significant decline in dynamic pulmonary function parameters in the study group when compared. FVC, FEV in first second, PEFR, FEV 1 /FVC, and FEF 25%-75% were all found to be statistically significantly lower in cab drivers as compared to control group (P < 0.001. Conclusion: This study finds a significant decline in various PFT parameters recorded in the study group as compared with the control group. These suggests a tendency for obstructive lung disease among cab drivers exposed to a polluted urban environment.

Organic positive ions in aircraft gas-turbine engine exhaust

Science.gov (United States)

Sorokin, Andrey; Arnold, Frank

Volatile organic compounds (VOCs) represent a significant fraction of atmospheric aerosol. However the role of organic species emitted by aircraft (as a consequence of the incomplete combustion of fuel in the engine) in nucleation of new volatile particles still remains rather speculative and requires a much more detailed analysis of the underlying mechanisms. Measurements in aircraft exhaust plumes have shown the presence of both different non-methane VOCs (e.g. PartEmis project) and numerous organic cluster ions (MPIK-Heidelberg). However the link between detected organic gas-phase species and measured mass spectrum of cluster ions is uncertain. Unfortunately, up to now there are no models describing the thermodynamics of the formation of primary organic cluster ions in the exhaust of aircraft engines. The aim of this work is to present first results of such a model development. The model includes the block of thermodynamic data based on proton affinities and gas basicities of organic molecules and the block of non-equilibrium kinetics of the cluster ions evolution in the exhaust. The model predicts important features of the measured spectrum of positive ions in the exhaust behind aircraft. It is shown that positive ions emitted by aircraft engines into the atmosphere mostly consist of protonated and hydrated organic cluster ions. The developed model may be explored also in aerosol investigations of the background atmosphere as well as in the analysis of the emission of fine aerosol particles by automobiles.

A wind-tunnel study on exhaust gas dispersion from road vehicles. Part 1. Velocity and concentration fields behind single vehicles

Energy Technology Data Exchange (ETDEWEB)

Kanda, Isao; Uehara, Kiyoshi; Yamao, Yukio [National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, 305-8506 (Japan); Yoshikawa, Yasuo; Morikawa, Tazuko [Petroleum Energy Center, 4-3-9 Toranomon, Minato-ku, Tokyo, 105-0001 (Japan)

2006-09-15

By a reduced-scale model in a wind tunnel, we investigate the dispersion behavior of exhaust gas from automobiles. Two types of vehicles are considered, a passenger car and a small-size truck. Tracer gas experiments show that the exhaust gas dispersion is enhanced significantly by the vehicle wake compared to the case when the vehicle body is absent. The passenger car and the truck promote dispersion in the horizontal and the vertical direction, respectively. The wake field is analyzed by particle image velocimetry (PIV), and the distribution of the mean and the fluctuation fields is found to conform to the concentration field of the exhaust gas. The buoyancy of the exhaust gas has minor effect except on the vertical spread behind the truck whose wake flow amplifies the vertical displacement generated near the pipe exit. (author)

Geotechnical Monitoring of the Automobile Road

Science.gov (United States)

Matsiy, Vladimir

2017-12-01

In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

Fiscal 2000 achievement report on the venture business assisting type regional consortium - Core industry creation type. Thermoelectric energy recovery system for automobile; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Jidoshayo netsuden energy kaishu system

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The project aims to develop a system for recovering heat from the thermal energy of automobile exhaust in the form of electric energy. Skutterudite based thermoelectric materials for high temperature use and existing thermoelectric materials for low/middle temperature use were improved in performance, and a dimensionless thermoelectric performance index of ZT=1 was attained. Advanced processes were applied for improvement on the performance of existing thermoelectric materials. In the effort to develop technologies for the mass production of thermoelectric materials for high temperature use, a material manufacturing process was established for manufacturing materials excellent in thermoelectric and mechanical properties using a method for mass-producing sinterable materials by gas atomization and a large discharge plasma sintering process capable of treating large specimens. In the effort to improve automobile power generation modules in performance and to establish element technologies for their manufacture, technologies were developed involving thermoelectric materials and electrodes, bonding of different thermoelectric materials, bonding of heat conducting electrical insulators and electrodes, and high efficiency segment type power generation modules. A high performance automobile exhaust gas heat exchanger was developed. A Co-Sb based thermoelectric module and a Bi-Te based module were combined and the package was tested aboard automobiles, when a maximum power output of 83W was achieved. It is necessary to review module arrangement. (NEDO)

Hierarchical functional model for automobile development; Jidosha kaihatsu no tame no kaisogata kino model

Energy Technology Data Exchange (ETDEWEB)

Sumida, S [U-shin Ltd., Tokyo (Japan); Nagamatsu, M; Maruyama, K [Hokkaido Institute of Technology, Sapporo (Japan); Hiramatsu, S [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

A new approach on modeling is put forward in order to compose the virtual prototype which is indispensable for fully computer integrated concurrent development of automobile product. A basic concept of the hierarchical functional model is proposed as the concrete form of this new modeling technology. This model is used mainly for explaining and simulating functions and efficiencies of both the parts and the total product of automobile. All engineers who engage themselves in design and development of automobile can collaborate with one another using this model. Some application examples are shown, and usefulness of this model is demonstrated. 5 refs., 5 figs.

The Hybrid Automobile and the Atkinson Cycle

Science.gov (United States)

Feldman, Bernard J.

2008-01-01

The hybrid automobile is a strikingly new automobile technology with a number of new technological features that dramatically improve energy efficiency. This paper will briefly describe how hybrid automobiles work; what are these new technological features; why the Toyota Prius hybrid internal combustion engine operates on the Atkinson cycle…

Reduction method of exhaust gas quantity

Energy Technology Data Exchange (ETDEWEB)

Ono, Y.; Morishita, K.

1975-02-08

A cleaning method for automobile exhaust through contact with sintered oxide semiconductors consisting of tin, antimony, manganese, and palladium oxides is discussed. This device has a much higher efficiency and lasts longer than any similar device developed previously consisting of oxides of iron, manganese cobalt, nickel, aluminum, and other rare earth metals. This sintered oxide semiconductor device is composed of: tin oxide: 30 wt ratio, tin hydrogen oxide: 30 wt ratio, antimony oxide: 2 wt ratio, manganese chloride: 2 wt ratio, palladium chloride: 1 wt ratio, carbon powder: 4 wt ratio, and ammonium carbonate: 10 wt ratio, for example. This device converts 100 percent of carbon monoxide into carbon dioxide at 350 C. This compound provides oxygen to CO at higher temperatures and absorbs oxygen from air at normal temperatures. There is no effect on efficiency.

Validation of Karolinska Exhaustion Scale: psychometric properties of a measure of exhaustion syndrome.

Science.gov (United States)

Saboonchi, Fredrik; Perski, Aleksander; Grossi, Giorgio

2013-12-01

The syndrome of exhaustion is currently a medical diagnosis in Sweden. The description of the syndrome largely corresponds to the suggested core component of burnout, that is exhaustion. Karolinska Exhaustion Scale (KES) has been constructed to provide specific assessment of exhaustion in clinical and research settings. The purpose of the present study was to examine the psychometric properties of this scale in its original and revised versions by examining the factorial structure and measures of convergent and discriminant validity. Data gathered from two independent samples (n1 = 358 & n2 = 403) consisting of patients diagnosed with 'reaction to severe stress, and adjustment disorder' were subjected to confirmatory factor analysis. The study's instruments were Karolinska Exhaustion Scale and Shirom Melam Burnout Measure. Correlation analyses were employed to follow up the established factorial structure of the scale. The study was ethically approved by Karolinska Institute regional ethic committee. The findings demonstrated adequate fit of the data to the measurement model provided by the revised version of KES Limitations: The main limitation of the present study is the lack of a gold standard of exhaustion for direct comparison with KES. (KES-26) and partially supported convergent validity and discriminant validity of the scale. The demonstrated psychometric properties of KES-26 indicate sound construct validity for this scale encouraging use of this scale in assessment of exhaustion. The factorial structure of KES-26 may also be used to provide information concerning possible different clinical profiles. © 2012 The Authors Scandinavian Journal of Caring Sciences © 2012 Nordic College of Caring Science.

Automobiles: Possible sources of metals other than lead in the urban atmosphere

International Nuclear Information System (INIS)

Xudong Huang; Keskin, S.S.; Olmez, I.; Gordon, G.E.

1992-01-01

At present, due to the lack of specific marker species and reliable source composition libraries for motor vehicle emissions, it is almost impossible to predict their impact on the urban atmosphere. During the last 2 yr, the authors have been performing an extensive program to identify specific inorganic tracers for recently manufactured automobiles to create a new source composition library. Initially, they speculated on the possibility of using rare earth element (REE) emissions from the modern catalytic converters. Their preliminary studies and Japanese studies indicated a substantial release of light REE from the exhausts of unleaded gasoline-powered autos. The present study, however, has shown that although REEs are emitted, their importance as a marker is minimal. Although they have analyzed numerous samples collected from test facilities, tunnels, and ambient aerosols, they present only the results of individual motor vehicle studies. Samples were collected from the exhaust of 52 passenger cars and minivans of domestic and foreign origin. All samples collected were analyzed by instrumental neutron activation analysis (INAA). The INAA results have shown that in addition to REEs, substantial amounts of other elements (sodium, magnesium, aluminum, potassium, manganese, iron, zinc, arsenic, bromine, antimony, etc.) were also emitted

Study of the damage processes induced by thermal fatigue in stainless steels F17TNb and R20-12 for automobile application; Etude de l'endommagement en fatigue thermique des aciers inoxydables F17TNb et R20-12 pour application automobile

Energy Technology Data Exchange (ETDEWEB)

Bucher, L.

2004-12-15

Thermal cycling is the main cause of fatigue failure in automobile exhaust manifolds for which the use of stainless steel now rivals that of cast iron which has been traditionally used. An original fatigue test has been developed by Ugine and ALZ, a stainless steel producer, so as to be able to compare different grades of stainless steel alloys. This test is representative of the thermal conditions encountered in the critical zones of exhaust manifolds. However, it has revealed significant differences in damage processes in the ferritic and austenitic grades tested. The subject of this thesis is the damage processes induced by thermal fatigue in stainless steels used for automotive exhaust manifolds. Two stainless steels were studied: a ferritic grade, F17TNb (17%Cr and stabilized with Ti and Nb), and an austenitic grade, R20-12, containing 20% Cr and 12% Ni. The first objective was to understand the different damage processes induced by thermal fatigue in the ferritic and austenitic grades. The second was to develop a numerical design tool of the thermally tested structures. (author)

Historical Financial Data - Domestic Automobile Manufacturers

Science.gov (United States)

1979-01-01

A historical financial data base was developed for the four major U.S. automobile manufacturers, focusing on the specific operations associated with production and marketing of automobiles and light trucks. The years subject to analysis were 1967-197...

La catalyse d'épuration des gaz d'échappement automobiles. Situation actuelle et nouvelles orientations Catalytic Automotive Exhaust Gas Depollution. Present Status and New Trends

Directory of Open Access Journals (Sweden)

Prigent M.

2006-11-01

Full Text Available Cet article passe en revue les différents systèmes catalytiques de post-traitement utilisés actuellement sur la plupart des automobiles pour limiter leurs rejets de polluants. Les systèmes sont différenciés par leur mode de fonctionnement, le type de moteur à dépolluer (deux-temps, quatre-temps, diesel ou essence ou par leur mode de réalisation. Les nouvelles orientations, prévues pour respecter les futures réglementations antipollution, sont également décrites. On montre que certains véhicules prototypes, équipés de moteurs à combustion interne, sont capables d'avoir des émissions très proches de zéro tout comme les véhicules électriques. A review is made of the various types of exhaust gas aftertreatment systems presently used on most vehicles to reduce pollutant emissions. The systems are differentiated by their mode of action, according to the engine type to be depolluted (two-stroke, four-stroke, diesel or spark-ignition, and by their type of make-up. The major developments foreseen in the future, in view of compliance with the new legislations, are described. It is shown that some prototype vehicles with internal combustion engines are able to emit pollutant quantities really close to zero, such as electric cars.

Recent trends in automobile recycling: An energy and economic assessment

Energy Technology Data Exchange (ETDEWEB)

Curlee, T.R.; Das, S.; Rizy, C.G. [Oak Ridge National Lab., TN (United States); Schexanyder, S.M. [Tennessee Univ., Knoxville, TN (United States). Dept. of Biochemistry

1994-03-01

Recent and anticipated trends in the material composition of domestic and imported automobiles and the increasing cost of landfilling the non-recyclable portion of automobiles (automobile shredder residue or ASR) pose questions about the future of automobile recycling. This report documents the findings of a study sponsored by the US Department of Energy`s Office of Environmental Analysis to examine the impacts of these and other relevant trends on the life-cycle energy consumption of automobiles and on the economic viability of the domestic automobile recycling industry. More specifically, the study (1) reviewed the status of the automobile recycling industry in the United States, including the current technologies used to process scrapped automobiles and the challenges facing the automobile recycling industry; (2) examined the current status and future trends of automobile recycling in Europe and Japan, with the objectives of identifying ``lessons learned`` and pinpointing differences between those areas and the United States; (3) developed estimates of the energy system impacts of the recycling status quo and projections of the probable energy impacts of alternative technical and institutional approaches to recycling; and (4) identified the key policy questions that will determine the future economic viability of automobile shredder facilities in the United States.

Contact Dermatitis In Automobile Repair workers

Directory of Open Access Journals (Sweden)

Joshi M P

1997-01-01

Full Text Available Automobile repair workers are at risk of developing skin morbidity including occupational dermatoses because of their exposure to mineral oils, petroleum products and its derivatives and lubricating oil. This cross- sectional study was carried out at Maharashtra State Road Transport Corporation workshops in Nagpur city to investigate prevalence of skin morbidity including contact dermatitis in automobile repair workers. The study included 288 (49.9% automobile repair workers 180 (31.3% workshop office staff and 109 (18.8% divisional office employees. Dermatitis was the commonest skin morbidity in all the study subjects and it was significantly more prevalent in automobile repair workers. Folliculitis was detected in 13.2% of auto â€" repair workers and was not seen in the other two groups. Increasing trend of skin morbidity was correlated with the length of service of employees. Proper protective measures along with suitable washing facilities should be provided

The challenges of automobile-dependent urban transport strategy

Directory of Open Access Journals (Sweden)

Jovanović Miomir

2015-01-01

Full Text Available The fundamental aims of sustainable urban development and the pro-automobile oriented economic development are on a collision course. It is obvious that automobile-dependent urban development is under heavy/powerful influence of the automobile lobby (automobile and oil industries, along with construction. In this domain famous land-use-transportation studies (or ‘grand transportation studies’ are, unfortunately, still prevailing - a vicious circle of self-fulfilling prophecy of congestion, road building, sprawl, congestion and more road building. Until recently, it was commonly thought that investment in public transport was not economically sustainable and that focusing on the development of the automobile industry and financing the construction of roadways stimulated economic growth. In this paper we clearly show that automobile industry is now overcapitalized, less profitable than many other industries (and may become even less profitable in the future, that transport market is characterized with huge distortions (more than a third of motor-vehicle use can be explained by underpriced driving, while new road investment does not have a major impact on economic growth (especially in a region with an already well-developed infrastructure, and that pro-automobile transport strategy inexorably incurs harmful global, regional and local ecological consequences. [Projekat Ministarstva nauke Republike Srbije, br. 37010

Can urban rail transit curb automobile energy consumption?

International Nuclear Information System (INIS)

Lin, Boqiang; Du, Zhili

2017-01-01

With the rapid development of China's economy and the speed of urbanization, China's automobile sector has experienced rapid development. The rapid development of the automobile sector has increased energy consumption. According to the results of this paper, automobile energy consumption accounted for about 10.73% of total energy consumption in China in 2015, about 3.6 times the proportion a decade ago. With the deterioration of urban traffic conditions, relying on expanding the amount of vehicles and city road network cannot solve the problem. Urban rail transit is energy-saving and less-polluting, uses less space, has large capacity, and secure. Urban rail transit, according to the principle of sustainable development, is a green transportation system and should be especially adopted for large and medium-sized cities. The paper uses the binary choice model (Probit and Logit) to analyze the main factors influencing the development of rail transit in Chinese cities, and whether automobile energy consumption is the reason for the construction of urban rail transit. Secondly, we analyze the influence of urban rail transit on automobile energy consumption using DID model. The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly, with continuous impact in the second year. - Highlights: • Investigate the main factors influencing the building of rail transit for Chinese cities. • Analyze the influence of urban rail transit on automobile energy consumption by DID model. • The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly.

Divorce your car: ending the love affair with the automobile

Energy Technology Data Exchange (ETDEWEB)

Alvord, K.

2000-07-01

This book is a guide for people wishing to liberate themselves from their addiction to cars and the automobile culture. It is a repository of examples and actions that individuals and communities can take to reduce dependence on the automobile. The range of possibilities run from using cars less to not owning one at all. The book provides a humorous yet clear-headed approach to a greener world and maps out the road to how people can live happily ever after by breaking free of 'auto-cracy', without insisting on people in car-dependent countries quit their automotive addiction instantly. Nevertheless, it clearly articulates the connection between automobiles, their arteries (i.e. highways) and effluents (i.e. greenhouse gases and particulate emissions), and the increasing number and severity of natural disasters between the urban renewal and freeway construction that, in the author's view, helped ignite the riots in Watts, Newark and Detroit. The disastrous societal and geophysical effects of the automobile are demonstrated in great abundance, and the mountain of evidence of the systematic abuse of the planet that the book provides is a stunning refutation of the notion that technology is neutral. The automobile is accused of being not only the linchpin of Western and primarily American industrialism and resource extraction, it is also accused of being the chief suspect in a century-long theft of time, conviviality and beauty. How to bring about a change in people's love affair with their cars is difficult to comprehend but this author has a multitude of useful suggestions which seem to suggest that it is possible. There is a list of 104 'selected references' and an extensive list of 'other resources'.

The future role of the automobile in Canada. Le role future de l'automobile au Canada

Energy Technology Data Exchange (ETDEWEB)

Khan, A.M.

1982-03-01

This paper describes the future role of the automobile from an intercity transportation perspective in multimodal contexts; it identifies courses of action open to Transport Canada officials in support of the suggested role. Discussed here is the automobile's multifaceted role, focussing mainly on its use as a mode of door-to-door travel for short trips, a feeder as well as an adjunct to public modes, a means of avoiding excessible public expenditure in highly subsidized public modes (e.g., rail), and a means for providing basic mobility in regional travel contexts. This study goes beyond the 1979 Transport Canada report with the same title by recommending courses of action that might assist officials in formulating policy, planning and other endeavours. At the outset, updated information is provided on the current status and future outlook of selected important factors that affect the future transportation role of the automobile. Against this background, the relevance of major findings of the 1979 automobile report are reviewed and gaps in knowledge identified. On the basis of this information, a future role for the automobile is discussed, with appropriate courses of action recommended. These recommendations and their institutional/program implications are addressed to Transport Canada in the areas of strategic planning and policy, energy planning, safety and coordination of actions/programs with other federal government departments and provincial governments. 48 refs., 8 tabs.

Two stage catalytic converter system to reduce exhaust emissions of HC, CO and NO in a motor vehicle

Energy Technology Data Exchange (ETDEWEB)

Nagalingam, B; Gopalakrishnan, K V; Murthy, B S

1978-09-01

Two-stage catalytic converter system is currently receiving considerable attention as a means to control the primary pollutants, namely, HC, CO and NO in the automobile exhaust. In order to explore the possibility of developing catalysts from indigenous and inexpensive sources of materials, sponge iron for NO reduction and manganese ore pebbles for HC/CO oxidation were tested as candidate-catalysts in an engine dynamometer test bed to study their catalytic activity. The results of these experiments are reported.

Asbestos-related diseases in automobile mechanics.

Science.gov (United States)

Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

2012-01-01

Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyse the frequency of pleural and parenchymal abnormalities on high-resolution computed tomography (HRCT) in a population of automobile mechanics. The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos-related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers; who in the case of disagreement discussed until they reached agreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Pleural plaques were observed in five cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in one case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers.

Asbestos-related diseases in automobile mechanics

Science.gov (United States)

Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

2012-01-01

Purpose Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyze the frequency of pleural and parenchymal abnormalities on HRCT in a population of automobile mechanics. Methods The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos–related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers, with further consensus in the case of disagreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Results Pleural plaques were observed in 5 cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in 1 case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. Conclusions The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers. PMID:21965465

Nitrosamines in new automobiles

Energy Technology Data Exchange (ETDEWEB)

Fine, D H; Reisch, J; Rounbehler, D P

1980-01-01

The volatile nitrosamines, N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMOR), N-nitrosodiethylamine (NDEA) and possibly N-nitrosodibutylamine (NDBA) have been found to be present as airborne pollutants in the interiors of new (1979 model) automobiles. In the 38 automobiles tested, the levels ranged from 0.07 to 0.83 micrograms/m3 (average 0.3 micrograms/m3) for NDMA, from 0.07 to 2.5 micrograms/m3 (average 0.67 micrograms/m3) for NMOR, from 0.04 to 0.39 micrograms/m3 (average 0.11 micrograms/m3) for NDEA and trace levels (less than 0.01 micrograms/m3) for NDMA.

Automobile Starting and Lighting System Maintenance Training ...

African Journals Online (AJOL)

The purpose of this study is to develop automobile starting and lighting system maintenance training manual for technical college students. Research and Development (R and D) design was adopted for the study. The population of the study is 348, comprising of 76 auto-mechanics teachers, 36 automobile supervisors and ...

Exhaust bypass flow control for exhaust heat recovery

Science.gov (United States)

Reynolds, Michael G.

2015-09-22

An exhaust system for an engine comprises an exhaust heat recovery apparatus configured to receive exhaust gas from the engine and comprises a first flow passage in fluid communication with the exhaust gas and a second flow passage in fluid communication with the exhaust gas. A heat exchanger/energy recovery unit is disposed in the second flow passage and has a working fluid circulating therethrough for exchange of heat from the exhaust gas to the working fluid. A control valve is disposed downstream of the first and the second flow passages in a low temperature region of the exhaust heat recovery apparatus to direct exhaust gas through the first flow passage or the second flow passage.

Catalytic Converter Developed By Washcoat Of γ-Alumina On Nickel Oxide (Nio Catalyst In FeCrAl Substrate For Exhaust Emission Control : A Review

Directory of Open Access Journals (Sweden)

Leman A.M.

2016-01-01

Full Text Available Automobile exhaust emission control is one of the trending issues in automobile research field. The existing catalytic converter using the noble metals of platinum (Pt, palladium (Pd and rhodium (Rd recently were in limited supply and higher in cost. There is a need for the automotive industry to produce ultra-low emitting vehicles at a reasonable cost. The objective of this study is to investigate the effectiveness of methods of fabrication of modified catalytic converter by approaching FeCrAl as a substrate which treated using ultrasonic bath technique to improve the exhaust emission control. The modified catalytic converter preparation will involve the ultrasonic bath process of FeCrAl foil which has fabricated as metallic monolith coated by γ-Al2O3 powder. Nickel as catalyst material will be prepared using electroplating process. The oxidation test will be conducted using a tube and automatic furnace in temperature of 1100°C for 100 hours. Mitsubishi 4G93 1800cc Petrol E.F.I with a multi -gas analyzer equipped with a hydraulic dynamometer will be used for emission measurements of HC, CO, and NOx in varying speed and load for both conditions with and without catalytic converter. The result will expect the γ-Al2O3 as the washcoat material that fully embedded to FeCrAl substrate with the combination of ultrasonic and electroplating technique will effectively convert the CO, NOx and HC to CO2, NO2 and H2O which means that catalytic converter is effective to improve exhaust emission control of diesel engine. The FeCrAl substrate as a metallic catalytic converter which coated by γ-Al2O3 using ultrasonic and nickelelectroplating technique may improve the exhaust emission control.

History of automobiles; Jidosha no rekishi

Energy Technology Data Exchange (ETDEWEB)

Iguchi, M. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

2000-01-01

Major automobile production regions moved every-time an innovational automotive technology was invented. When product technology, mass production technology and commercializing technology, product technology for medium and small cars, and lean production technology have emerged in the century, major production regions moved from West Europe to the U.S.,. to revived West Europe again, and Japan joined in the regions successively. A future problem is what technology will change the world distribution of automobile production regions. (author)

Automobile Club CERN

CERN Multimedia

Automobile Club CERN

2010-01-01

 L’Assemblée Générale Ordinaire de «L’Automobile Club du CERN» s’est tenue le mercredi 12 janvier 2010. Le Président, J. Pierlot, souhaite la bienvenue aux membres présents, annonce l’agenda et résume les activités et événements du club pour l’année 2009. Le Club compte environ 600 membres, une petite diminution par rapport aux précédentes années dû surtout aux départs anticipés à la retraite. La cotisation reste inchangée : 50 CHF. Notre trésorier, E. Squadrani, présente de façon détaillée la situation du compte d’exploitation pour 2009 ainsi que le bilan de l’Automobile Club. Les comptes sont équilibrés, la situation de la trés...

Globalization of the automobile industry: traditional locations under pressure?

OpenAIRE

Spatz, Julius; Nunnenkamp, Peter

2004-01-01

Even though the automobile industry is technologically advanced, the increasing integration of low-income countries into the global division of labor has put competitive pressure on traditional automobile producing countries. New end-producers emerged in Asia, Latin America as well as Southern and Central Europe. In addition, the automobile industries of Germany, Japan and the United States engaged in outsourcing of relatively labor intensive segments of the value chain, especially on a regio...

DESIGNING OF AN AUTOMOBILE FLEET NETWORK

Directory of Open Access Journals (Sweden)

R. B. Ivut

2016-01-01

Full Text Available Investment volume is considered as an important factor in regional development under current conditions. Logistical infrastructure which ensures a complex transport, distributive, information and other services exerts a significant influence on regional investment attractiveness. Lack of clear vision on development and execution of development strategy for logistics infrastructure from the side of regional authorities results in unwillingness of large federal and transnational companies to provide investments in infrastructure projects. Network of automotive transport terminals is one of the main elements in logistics infrastructure. The network allows to optimize a flow of material goods from the point of their origin to the point of their consumption with the lowest possible costs and the required level of service. Automobile transport is one of the main objects of transport infrastructure and it is characterized by rather high flexibility in comparison with other types of transport facilities that preconditions its widespread application. Network of automobile fleets (terminals has been formed for redistribution of goods traffic within the concerned regions. The purpose of the present research is to develop a mathematical model for formation of transport infrastructure on the territory of regions. The paper proposes an approach for formation of automobile fleet (terminal network on the territory of a large region with due account of the established network of distribution and sorting-out warehouse facilities. A model has been developed for solving the problem pertaining to minimization of aggregate costs related to maintenance of automobile fleets, delivery of goods to and from distribution and sorting-out warehouse facilities to consumers, ferry of empty trucks and goods handling. The model makes it possible to determine optimal number and location area of automobile fleets (terminals while accounting for their possible locations, capacity

Automobile technology in a CO{sub 2}-constrained world

Energy Technology Data Exchange (ETDEWEB)

Kypreos, S; Barreto Gomez, L; Dietrich, Ph [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Schafer, A; Jacoby, H D [MIT, Cambridge (United States)

1999-08-01

This study identifies the environmental conditions under which less CO{sub 2}-emitting and more expensive automobile technology might enter the North American transportation sector. For that purpose, different exogenous CO{sub 2}-reduction targets are imposed and the resulting market shares of hypothetical future automobile technologies calculated. The criteria for the selection of different types of automobiles/fuels is the minimisation of discounted, cumulative transport sector costs over the scenario time horizon. (author) 1 tab., 6 refs.

Environmental implications of the automobile

International Nuclear Information System (INIS)

1993-01-01

There are over 12 million automobiles in Canada, each travelling over 16,000 km annually. The value of motor vehicles and parts produced in Canada accounts for over 6% of the gross domestic product, and vehicle-related sales account for the largest proportion of Canadian retail activity. The environmental issues related to the high impact of the automobile on Canadian life are discussed. In the manufacture of motor vehicles, over 2 billion kg of metal are used a year; although much of this comes from recycled materials, some depletion of nonrenewable resources is required. It is also estimated that 66-105 GJ of energy are needed to produce a motor vehicle, equivalent to as much as 20% of all the energy consumed during the vehicle's lifetime. Environmental impacts result from this use of resources and energy, including land disturbances and air pollution. Land use impacts are also those related to appropriation of urban and rural land for roadway and service uses, plus pollution of adjoining lands by road runoff. In 1990, the transportation sector used 29% of end-use energy, of which retail gasoline sales for motor vehicles accounted for 54%. Environmental impacts from oil refining, fuel combustion, and waste disposal are described, and programs to mitigate these impacts are outlined. Significant reductions in automobile emissions have already occurred from the increased use of emission control devices, improved fuel efficiency, and stricter standards. Further improvements are possible via such means as better manufacturing procedures, increased recycling of automobile components, better inspection and maintenance, and use of alternative fuels and alternate transportation modes. 35 refs., 3 figs., 4 tabs

Performance Investigation of an Exhaust Thermoelectric Generator for Military SUV Application

Directory of Open Access Journals (Sweden)

Rui Quan

2018-01-01

Full Text Available To analyze the thermoelectric power generation for sports utility vehicle (SUV application, a novel thermoelectric generator (TEG based on low-temperature Bi2Te3 thermoelectric modules (TEMs and a chaos-shaped brass heat exchanger is constructed. The temperature distribution of the TEG is analyzed based on an experimental setup, and the temperature uniformity optimization method is performed by chipping peak off and filling valley is taken to validate the improved output power. An automobile exhaust thermoelectric generator (AETEG using four TEGs connected thermally in parallel and electrically in series is assembled into a prototype military SUV, its temperature distribution, output voltage, output power, system efficiency, inner resistance, and backpressure is analyzed, and several important influencing factors such as vehicle speed, clamping pressure, engine coolant flow rate, and ambient temperature on its output performance are tested. Experimental results demonstrate that higher vehicle speed, larger clamping pressure, faster engine coolant flow rate and lower ambient temperature can enhance the overall output performance, but the ambient temperature and coolant flow rate are less significant. The maximum output power of AETEG is 646.26 W, the corresponding conversion efficiency is 1.03%, and the increased backpressure changes from 1681 Pa to 1807 Pa when the highest vehicle speed is 125 km/h.

Electron spin resonance of particulate soot samples from automobiles to help environmental studies

International Nuclear Information System (INIS)

Yamanaka, C.; Matsuda, T.; Ikeya, M.

2005-01-01

The application of electron spin resonance (ESR) was studied for diesel soot samples and suspended particulate matter (SPM) from automobile engines. Soot samples or diesel exhaust particles (DEP) were recovered at various points: in the exhaust pipe of a diesel engine, at the dust sampler of a highway tunnel (standard DEP), on the soundproofing wall alongside a heavy traffic road, and on the filters of a dust sampler for SPM. The diesel soot samples apparently showed two ESR spectra: one was a broad spectrum at g=2.1 with a line width of ca. 80-120mT and the other was a sharp signal of a carbon radical at g=2.003 with a line width of 0.4mT. Annealing experiments with a DEP sample at 250 deg. C revealed drastic enhancement of the sharp ESR signal, which suggested a thermal process of carbonization of remnant organics. An oximetric study by ESR showed an enhancement of the broad signal in the diesel soot sample as well as in the sharp ESR signal. Therefore, the main part of the broad ESR signal would be attributed to carbon radicals, which form a different configuration, probably closely interacting aggregates. Enhancement of the sharp ESR signal was not observed in the standard DEP sample under vacuum condition, which suggested less adsorption sites on the surface of DEP samples

Effects of automobile battery wastes on physicochemical properties ...

African Journals Online (AJOL)

Difference in soil qualities has been noticeable in many soils due to anthropogenic sources, especially of automobile battery wastes. This study examines the effects of automobile battery wastes on the physicochemical properties of the soil. Soil samples for this study were collected in triplicates from three battery chargers' ...

Plant pollution from lead produced by automobile exhaust system near certain highways of Iran

International Nuclear Information System (INIS)

Rahmani, H.R.; Kalbasi, M.; Hajrasuliha, Sh.

2001-01-01

Plants polluted with Pb produced by automobiles along the roads and highways have extensively been reported all over the world. It is the most important source of pollution in the environment. This research was carried out to determine the polluting degree of plants along the highways such as: Rasht-Anzaly, Kelachay-Ramsar, Tehran-Karaj, and Isfahan-Tehran. At each arbitrary point, a transect 100 meters long perpendicular to the highway was selected for sampling. Along each transect, plants were sampled at 15 cm above the ground, in different distances from the highway. Samples were transported to the laboratory and analyzed by a standard method. The average concentration of total Pb determined in Anzali, Ramsar, Karaj and Delijan (east and west of the road) areas respectively were 114.5, 58.3, 260.2, 75.1 and microgram per gram dry plant weight. Total Pb content in plants along the roads were high and exponentially decreasing with distance from the roadside. Pb concentration in plants were higher than threshold of Standard, so the risk of entrain g of this poisonous element in nutrition system along the roads is very considerable. The plants were polluted from medium degree up to a very high degree. The rate of pollution in plant samples is very high in Karaj area, high in Anzali area, and medium in Ramsar and Delijan areas. Plant pollution was directly related to the traffic volume in road

Environmental practices of the auxiliary companies to the Spanish automobile industry

Science.gov (United States)

González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

2005-11-01

The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

A bivariate model for analyzing recurrent multi-type automobile failures

Science.gov (United States)

Sunethra, A. A.; Sooriyarachchi, M. R.

2017-09-01

The failure mechanism in an automobile can be defined as a system of multi-type recurrent failures where failures can occur due to various multi-type failure modes and these failures are repetitive such that more than one failure can occur from each failure mode. In analysing such automobile failures, both the time and type of the failure serve as response variables. However, these two response variables are highly correlated with each other since the timing of failures has an association with the mode of the failure. When there are more than one correlated response variables, the fitting of a multivariate model is more preferable than separate univariate models. Therefore, a bivariate model of time and type of failure becomes appealing for such automobile failure data. When there are multiple failure observations pertaining to a single automobile, such data cannot be treated as independent data because failure instances of a single automobile are correlated with each other while failures among different automobiles can be treated as independent. Therefore, this study proposes a bivariate model consisting time and type of failure as responses adjusted for correlated data. The proposed model was formulated following the approaches of shared parameter models and random effects models for joining the responses and for representing the correlated data respectively. The proposed model is applied to a sample of automobile failures with three types of failure modes and up to five failure recurrences. The parametric distributions that were suitable for the two responses of time to failure and type of failure were Weibull distribution and multinomial distribution respectively. The proposed bivariate model was programmed in SAS Procedure Proc NLMIXED by user programming appropriate likelihood functions. The performance of the bivariate model was compared with separate univariate models fitted for the two responses and it was identified that better performance is secured by

Illustrating Newton's Second Law with the Automobile Coast-Down Test.

Science.gov (United States)

Bryan, Ronald A.; And Others

1988-01-01

Describes a run test of automobiles for applying Newton's second law of motion and the concept of power. Explains some automobile thought-experiments and provides the method and data of an actual coast-down test. (YP)

A comparative study among the three wheeler automobile drivers on pulmonary function tests in adult males of Gulbarga city

Directory of Open Access Journals (Sweden)

Afshan Afroz, Salgar Veeresh B, Sugoor Manjushree, Swati I Amrutha

2013-01-01

Full Text Available Development of our country has led to rapid urbanization and there is increasing use of automobiles that is aggravating environmental pollution. Occupational exposure to automobile exhaustand industrial smokes has been shown to affect functioning of different systems of the body. The present study was taken up to assess the Pulmonary Function Tests (PFT in auto rickshaw drivers of Gulbargacity. Methods: Fifty non –smoker male auto drivers in the age group of 20–50 years for more than 5 years of auto driving experience formed the study group. Age and sex matched individuals not exposed to auto rickshaw driving [administrative staff] formed the control group. Pulmonary function parametersFVC, FEV1, FEV1%, PEFR, PIFR, FEF25-75, FEF50 and MVV were assessed using a computerized Spiro meter during their working hours and were statistically analyzed. Results: There was a highly significant decrease in FVC and FEV1 in the study group compared to control group. The decrease in FEV1%, PIFR, FEF25-75 and FEF50 were statistically significant but the decrease in PEFR and MVV were statistically nonsignificant. Conclusion: Our findings point towards the adverse effects of vehicle exhaust on lung functions, mainly on lower airways with restrictive pattern of disease.

Renewing Marketing Strategy in Kenyan Automobile Industry

OpenAIRE

Kalliokuusi, Miriam

2013-01-01

This thesis studies how to renew existing marketing strategies for case company; in so doing, the thesis fulfills its main objective. Company X, a market leader in the Kenyan automobile sector and has various well-known brands under their corporate umbrella. The automobile industry in Kenya has faced some hardship with steady decline in sales in the last couple of years and Mercedes-Benz as a brand suffered under the circumstances. One major cause of the drop in sales is due to the influx of ...

Technology development for meeting with automobiles negotiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Il [Korea Institute of Machinery and Materials, Seoul (Korea)

2000-06-01

The direction of technology development for meeting with automobiles negotiation is to establish a development and supply policy of automobile with the minimum mileage. Furthermore the development policy of diesel car should be promoted with the same level of gasoline engine emission and a new concept of developing clean diesel engine is needed to achieve this goal. Therefore a smoke-filtering device, developed in Korea, should be promoted for supplying and post-process technology development such as SCR and DeNox catalyzer should be promoted.

Impact of auto vehicular exhaust on some roadside trees during different seasons

International Nuclear Information System (INIS)

Shafique, M.; Iqbal, M.Z.

1999-01-01

The leaf length, width, area and dry weight were used to demonstrate the effect of air pollution on the grown of Alstonia Scholaris, Terminalia arjuna and callistimone citrinus. The automobile emission significantly reduced the growth of T. arjuna and A. Sholaris at the highly polluted sites of the city. The automobile pollutants significantly reduced the leaf length, width and dry weight of T, arjuna at the Mall Road in summer, whereas A. sholaris was significantly (p<0.05) affected at the same site in winter season. Citrinus was found less affected as compared to the other species

Design and simulation of 120 capacity automobile parking control ...

African Journals Online (AJOL)

Design and simulation of 120 capacity automobile parking control system using up/down decade counters. ... leave(s) the parking lot through the exit gate the counter counts down, and the DC motor circuitry drives the entry gate open to allow access for the same number of automobiles that leave(s) the parking lot.

Optimized Design of Thermoelectric Energy Harvesting Systems for Waste Heat Recovery from Exhaust Pipes

Directory of Open Access Journals (Sweden)

Marco Nesarajah

2017-06-01

Full Text Available With the increasing interest in energy efficiency and resource protection, waste heat recovery processes have gained importance. Thereby, one possibility is the conversion of the heat energy into electrical energy by thermoelectric generators. Here, a thermoelectric energy harvesting system is developed to convert the waste heat from exhaust pipes, which are very often used to transport the heat, e.g., in automobiles, in industrial facilities or in heating systems. That is why a mockup of a heating is built-up, and the developed energy harvesting system is attached. To build-up this system, a model-based development process is used. The setup of the developed energy harvesting system is very flexible to test different variants and an optimized system can be found in order to increase the energy yield for concrete application examples. A corresponding simulation model is also presented, based on previously developed libraries in Modelica®/Dymola®. In the end, it can be shown—with measurement and simulation results—that a thermoelectric energy harvesting system on the exhaust pipe of a heating system delivers extra energy and thus delivers a contribution for a more efficient usage of the inserted primary energy carrier.

Electric accessory drives in automobiles. Elektrische Hilfsantriebe in Kraftfahrzeugen

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

Ten lectures were presented on the conference ''Electric accessory drives in automobiles'' subjects: - Survey on electric accessory drives in automobiles; cooperation of generator, battery and starter; technical solution of accessory drives, considerations on a system; comparison of various solutions for drives by viewing the example of a headlight vertical aim control; wiper motors and their control; blowers for heating, ventilation and air conditioning in automobiles; criteria for dimensioning of blower motors; drives in heating and air-conditioning applicances; permanent magnets for engine excitation; systematic quality assurance of electric accessory drives from car-development to serial production. Numerous illustrations and formulas are supplied which illustrate and explain the lectures. Each lecture is abstracted individually.

Energy autonomous sensors in the automobile; Energieautarke Sensorik im Automobil

Energy Technology Data Exchange (ETDEWEB)

Kuehne, Ingo [Hochschule Heilbronn (Germany). Studiengang Energieoekologie; Schreiter, Matthias [Siemens AG, Muenchen (Germany); Li, Xiaoming [Daimler AG, Sindelfingen (Germany); Hehn, Thorsten [Hahn-Schickard-Gesellschaft fuer angewandte Forschung e.V., Freiburg (Germany). HSG-IMIT, Inst. fuer Mikro- und Informationstechnik; Thewes, Marcell; Scholl, Gerd [Helmut-Schmidt-Univ., Univ. der Bundeswehr, Hamburg (Germany); Wagner, Dieter [Continental Automotive GmbH, Regensburg (Germany); Manoli, Yiannos [Univ. Freiburg (Germany). IMTEK; Frey, Alexander [Hochschule Augsburg (Germany). Fakultaet Elektrotechnik

2013-04-01

A brief outline of energy autonomous sensors in the automobile is given. For this purpose the variety of sensors in today's automotive vehicles is reported. The rationale for the deployment of energy autonomous sensors is given. In addition the potential of using environmental energy and the possibilities of their energy conversion are presented. As part of the funded project ASYMOF, two pioneer applications - a tire pressure monitoring and an anti-theft alarm system - are studied and discussed.

Acceptance test report for portable exhauster POR-008/Skid F

International Nuclear Information System (INIS)

Kriskovich, J.R.

1998-01-01

Portable Exhauster POR-008 was procured via HNF-0490, Specification for a Portable Exhausted System for Waste Tank Ventilation. Prior to taking ownership, acceptance testing was performed at the vendors. However at the conclusion of testing a number of issues remained that required resolution before the exhausters could be used by Project W-320. The purpose of acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-O49O, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document

Pulmonary function in automobile repair workers

Directory of Open Access Journals (Sweden)

Chattopadhyay O

2007-01-01

Full Text Available Background : Automobile repair shop is a place where workers are exposed to harmful chemicals and toxic substances. Objective : To study the occurrence of obstructive and restrictive pulmonary impairment among automobile garage workers. Methods : A cross sectional study involving 151 automobile garage workers from 14 randomly selected garages of urban Kolkata. The study variables were Forced Expiratory Volume in 1 second (FEV 1 , Forced Vital Capacity (FVC, Peak Expiratory Flow Rate (PE FR, age, smoking habit, duration of work, type of work, and respiratory symptoms. The study was analysed using Regression equations, and Chi-square test. Results : All the workers were male. Obstructive impairment was seen in 25.83% of the workers whereas restrictive impairment was seen in 21.19% of the workers. Mixed obstructive and restrictive impairment was seen in 10.6% of the workers. The frequency of obstructive impairment was higher in older workers. In the age group of less than 20 years, 13.6% of the workers had obstructive impairment while 42.86% of workers above 40 years of age had obstructive impairment. Obstructive impairment was more frequently observed in battery repair workers (58.33% and spray painters (37.5% while 16.67% of the body repair workers and 30.19% of the engine mechanics had obstructive impairment. Obstructive impairment was more frequently observed in smokers (53.1 % as compared to ex-smokers (33.3% and non-smokers (6.4%. Obstructive impairment was more frequently observed in workers who had been working for a longer duration. Conclusion: Nearly 36.4% of the automobile garage workers had some form of pulmonary function impairment; obstructive and/or restrictive. The use of personal protective equipment, worker education, and discontinuation of the use of paints containing toxic pigments are recommended.

Exhaust gas processing facility

International Nuclear Information System (INIS)

Terada, Shin-ichi.

1995-01-01

The facility of the present invention comprises a radioactive liquid storage vessel, an exhaust gas dehumidifying device for dehumidifying gases exhausted from the vessel and an exhaust gas processing device for reducing radioactive materials in the exhaust gases. A purified gas line is disposed to the radioactive liquid storage vessel for purging exhaust gases generated from the radioactive liquid, then dehumidified and condensed liquid is recovered, and exhaust gases are discharged through an exhaust gas pipe disposed downstream of the exhaust gas processing device. With such procedures, the scale of the exhaust gas processing facility can be reduced and exhaust gases can be processed efficiently. (T.M.)

Corrosion protection and finishing of automobiles

International Nuclear Information System (INIS)

Sheikh, S.T.

2005-01-01

finishing of automobiles is an important aspect. There have been considerable reductions of weight in automobiles by the use of composites components replacing heavy metallic components. Fenders previously based on metal have been replaced with plastic and painted with the same colour shade as of the metallic body, this has eps for proper adhesion of the paints on the plastic fender to avoid chipping off the paint form it. This paper discusses the necessary processes required for finishing of an automobile along with the corrosion protection measures. Automobiles contains a variety of engineering materials, engine main body fuel tanks connecting rods heat radiators and other mechanical parts are made from different types of engineering alloys having varying chemical compositions. Other parts like dashboard, front panel and other are made from composites. The main body made from cold roll ed steel having various contours 'c' it due to the different designs is the potential site for corrosion attack, The main body is exposed to the hostile environment through out its life period. An automobile is given a particular finish with a view to counter the hostile environments as they are not limited for plying in a limiting conditions and are taken to different weather conditions in one day thus facing severe stresses and strain. Thus it is essential that an automobile before rolling 'out of the assembly line should properly corrosion resistant and aesthetically pleasant also. Finishing for automobiles being very specialized, the main requirement being maximum durability with minimum numbers of coats baked, at the fastest possible schedule. High gloss and range of good eye catching colours being important to increase sales appeal. In the near past the car finishes were based on alkyd-amino resins baking materials and force drying lacquers, which have excellent appearance originally and maintain it on aging. The finishing system for the synthetic baking type may consist of

Operating cycle resolved modelling and hardware-in-the-loop-simulation of diesel engines of automobiles with turbocharging; Arbeitsspielaufgeloeste Modellbildung und Hardware-in-the-Loop-Simulation von Pkw-Dieselmotoren mit Abgasturboaufladung

Energy Technology Data Exchange (ETDEWEB)

Zahn, Sebastian

2012-11-01

Model-based and simulation-based approaches increasingly are used in the process of software development and function development for automobile control devices in order to reduce the development time as well as to save test-stand trials. The author of the contribution under consideration reports on the design of a dynamic model of a diesel engine for the hardware-in-the-loop test environment. The development, the test and pre-application of modern engine control units of automobiles with a cylinder-based combustion control is in the focus of the model application. The developed real-time model of the engine consists of a air pathway model, an exhaust gas pathway model, a VTG turbocharger model, a model of the cylinder group as well as an emission model. The parametrization of the engine model requires a continuous setting method. The model is validated by means of stationary and dynamic measured data of the engine test stand.

Automobile characteristics historical data base

Science.gov (United States)

1977-08-01

A collection of data concerning the physical, operating, and performance characteristics of automobiles for the model years 1955, 1960, 1965, 1968, and 1970 to 1974. Data is to be added to the data base already established by DOT/TSC, for the 1975 mo...

Test Program for High Efficiency Gas Turbine Exhaust Diffuser

Energy Technology Data Exchange (ETDEWEB)

Norris, Thomas R.

2009-12-31

This research relates to improving the efficiency of flow in a turbine exhaust, and thus, that of the turbine and power plant. The Phase I SBIR project demonstrated the technical viability of “strutlets” to control stalls on a model diffuser strut. Strutlets are a novel flow-improving vane concept intended to improve the efficiency of flow in turbine exhausts. Strutlets can help reduce turbine back pressure, and incrementally improve turbine efficiency, increase power, and reduce greenhouse gas emmission. The long-term goal is a 0.5 percent improvement of each item, averaged over the US gas turbine fleet. The strutlets were tested in a physical scale model of a gas turbine exhaust diffuser. The test flow passage is a straight, annular diffuser with three sets of struts. At the end of Phase 1, the ability of strutlets to keep flow attached to struts was demonstrated, but the strutlet drag was too high for a net efficiency advantage. An independently sponsored followup project did develop a highly-modified low-drag strutlet. In combination with other flow improving vanes, complicance to the stated goals was demonstrated for for simple cycle power plants, and to most of the goals for combined cycle power plants using this particular exhaust geometry. Importantly, low frequency diffuser noise was reduced by 5 dB or more, compared to the baseline. Appolicability to other diffuser geometries is yet to be demonstrated.

Optimizing Diamond Structured Automobile Supply Chain Network Towards a Robust Business Continuity Management

Directory of Open Access Journals (Sweden)

Abednico Montshiwa

2016-02-01

Full Text Available This paper presents an optimized diamond structured automobile supply chain network towards a robust Business Continuity Management model. The model is necessitated by the nature of the automobile supply chain. Companies in tier two are centralized and numerically limited and have to supply multiple tier one companies with goods and services. The challenge with this supply chain structure is the inherent risks in the supply chain. Once supply chain disruption takes place at tier 2 level, the whole supply chain network suffers huge loses. To address this challenge, the paper replaces Risk Analysis with Risk Ranking and it introduces Supply Chain Cooperation (SCC to the traditional Business Continuity Plan (BCP concept. The paper employed three statistical analysis techniques (correlation analysis, regression analysis and Smart PLS 3.0 calculations. In this study, correlation and regression analysis results on risk rankings, SCC and Business Impact Analysis were significant, ascertaining the value of the model. The multivariate data analysis calculations demonstrated that SCC has a positive total significant effect on risk rankings and BCM while BIA has strongest positive effects on all BCP factors. Finally, sensitivity analysis demonstrated that company size plays a role in BCM.

A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles

International Nuclear Information System (INIS)

Shancita, I.; Masjuki, H.H.; Kalam, M.A.; Rizwanul Fattah, I.M.; Rashed, M.M.; Rashedul, H.K.

2014-01-01

Highlights: • Introduce various idling reduction technologies for transport vehicles. • Exhibit their energy use, advantages, disadvantages to understand their capability. • Conduct critical review to improve fuel economy and exhaust emissions. • Suggest better technology according to their performance ability. - Abstract: To achieve reductions in vehicle idling, strategies and actions must be taken to minimize the time spent by drivers idling their engines. A number of benefits can be obtained in limiting the idling time. These benefits include savings in fuel use and maintenance costs, vehicle life extension, and reduction in exhaust emissions. The main objective of idling reduction (IR) devices is to reduce the amount of energy wasted by idling trucks, rail locomotives, and automobiles. During idling, gasoline vehicles emit a minimum amount of nitrogen oxides (NO x ) and negligible particulate matter (PM). However, generally a large amount of carbon monoxide (CO) and hydrocarbons (HC) are produced from these vehicles. Gasoline vehicles consume far more fuel at an hourly rate than their diesel counterparts during idling. Higher NOx and comparatively larger PM are produced by diesel vehicles than gasoline vehicles on the average during idling. Auxiliary power unit (APU), direct-fired heaters, fuel cells, thermal storage system, truck stop electrification, battery-based systems, engine idle management (shutdown) systems, electrical (shore power) solutions, cab comfort system, and hybridization are some of the available IR technologies whose performances for reducing fuel consumption and exhaust emissions have been compared. This paper analyzes the availability and capability of most efficient technologies to reduce fuel consumption and exhaust emissions from diesel and gasoline vehicles by comparing the findings of previous studies. The analysis reveals that among all the options direct fired heaters, APUs and electrified parking spaces exhibit better

Technological trends in automobiles.

Science.gov (United States)

Horton, E J; Compton, W D

1984-08-10

Current technological trends in the automotive industry reflect many diverse disciplines. Electronics and microprocessors, new engine transmission concepts, composite and ceramic materials, and computer-aided design and manufacture will combine to make possible the creation of advanced automobiles offering outstanding quality, fuel economy, and performance. A projected "average" vehicle of the 1990's is described to illustrate the application of these new concepts.

The Antecedents of Automobile Brand Loyalty: Evidence from Malaysian

OpenAIRE

Mabkhot, Hashed Ahmed; Salleh, Salniza MD; Shaari, Hasnizam

2016-01-01

This study empirically examined the mediating effect of brand satisfaction on the relationship between brand image and brand loyalty among Malaysian customer toward local automobile brands. Four hypotheses were developed to test hypothesizing relationships among brand image, brand satisfaction on brand loyalty. Data collected from customers of automobile brands in north Malaysia peninsula from three states which were Kedah, Penang, and Perlis. This study applies partial least squares to a sam...

Reducing automobile traffic: an urgent policy for health promotion

Directory of Open Access Journals (Sweden)

Tapia Granados José A.

1998-01-01

Full Text Available In recent decades traffic injuries have become a leading cause of death and disability the world over. In congested urban areas, the noise and emissions from vehicle engines cause discomfort and disease. More than one billion people are exposed daily to harmful levels of atmospheric contamination. Because internal combustion generates carbon dioxide (CO2 , the automobile is a principal contributor to the greenhouse effect, which has significantly raised the temperature of the atmosphere. Scientists anticipate that in coming decades the greenhouse effect will produce alterations in climate that are very likely to be harmful and possibly catastrophic. Meanwhile, burgeoning traffic and rural and urban highway infrastructures are already among the principal causes of environmental degradation. Urban development, because it is nearly always "planned" to accommodate automobiles rather than people, reduces the quality of life and tears the social fabric. In contrast to private automobiles, public transportation, bicycles, and walking produce little environmental contamination or injury-related morbidity and mortality. These modes of transport involve more physical activity, with its positive health effects, and avoid contributing to the greenhouse effect. The reduction of automobile traffic and substitution of alternative modes of transport are essential policies for health promotion. They should be incorporated in "healthy cities" programs and general economic policies.

Intelligent solar-powered automobile-ventilation system

International Nuclear Information System (INIS)

Huang, K. David; Tzeng, S.-C.; Ma Weiping; Wu Mingfung

2005-01-01

This study adopts airflow management technology to improve the local temperature distributions in an automobile to counteract the greenhouse effect. The automobile's temperature can be reduced to almost the outside temperature before the driver or passenger gets into the vehicle. When the engine is idling, the greenhouse-control system can be activated to remove the hot air from the car. An appropriate negative pressure is maintained to prevent stuffiness and save energy. The greenhouse-control system requires electrical power when the engine is idle, and a battery cannot supply sufficient power. An auxiliary solar-power supply can save energy and reduce the greenhouse effect of sunlight, while creating a comfortable traveling environment. It ensures that the engine is not overburdened and increases its service life, conserving energy, protecting the environment and improving comfort

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

Science.gov (United States)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

Environmental change and hedonic cost functions for automobiles.

Science.gov (United States)

Berry, S; Kortum, S; Pakes, A

1996-11-12

This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate "hedonic cost functions" that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices.

Environmental change and hedonic cost functions for automobiles

Science.gov (United States)

Berry, Steven; Kortum, Samuel; Pakes, Ariel

1996-01-01

This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate “hedonic cost functions” that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices. PMID:8917486

Field-effect gas sensors and their application in exhaust treatment systems; Feldeffekt-Gassensoren und ihre Anwendung in Abgasnachbehandlungssystemen

Energy Technology Data Exchange (ETDEWEB)

Schalwig, Jan

2002-07-01

Tightening environmental constraints on exhaust gas emissions of gasoline and Diesel engines led to a growing interest in new and highly sophisticated gas sensors. Such sensors will be required in future exhaust gas aftertreatment systems for the selective real time detection of pollutants such as nitric oxides, hydrocarbons and carbon monoxide. Restrictions on cost and device dimensions imposed by the automobile industry make semiconductor gas sensors promising candidates for the realization of cheap and small-size sensor devices. This work deals with semiconductor field effect devices with catalytically active platinum (Pt) electrodes and potential applications of such devices in automotive exhaust gas aftertreatment systems. To allow for continuous operation at high temperatures, silicon carbide (SiC) and group III-nitrides such as GaN and AlGaN were used as semiconductor materials. Different devices have been realized with such materials: SiC based MOS capacitors (MOSiC), GaN Schottky diodes and GaN/AlGaN high electron mobility transistors (HEMT). The principle feasibility of SiC and GaN based field effect gas sensors for automotive applications was tested under laboratory conditions using synthetic gas mixtures. Exhaust gas components such as carbon monoxide (CO), nitric oxides (NO and NO{sub 2}), various saturated and unsaturated hydro-carbons as well as water vapor, oxygen (O{sub 2}) and hydrogen (H{sub 2}) were used as test gases in appropriate concentrations with the sensor devices being operated in a range of temperatures extending from room temperature up to 600{sup o}C. (orig.)

Mind the Gap: The Vicious Circle of Measuring Automobile Fuel Use

DEFF Research Database (Denmark)

Figueroa, Maria; author), L. Schipper (main; Price, L.

1993-01-01

We review the circularity between estimates of automobile use, fuel consumption and fuel intensity. We find that major gaps exist between estimates of road gasoline, the quantity most often used to represent automobile fuel use in economic studies of transport fuel use, and the actual sales data...

Production of spheroidal graphite cast iron (S. G. Iron) for an automobile brake drum

International Nuclear Information System (INIS)

Butt, M.T.Z.; Aziz, S.

2005-01-01

The role of automobile industry for any country has a great importance. Break drum is one of the essential parts of automobile car and its local casting is required in order to achieve the target for automobile industry because it has special significance. Break drum being the important constituent of the system of an automobile requires a great degree of accuracy and reliability. S. G. Iron is preferred because of its mechanical properties i.e., higher strength modulus, impact resistance and ductility along with excellent machinability and manufacturing ease. (author)

Correction of Measured Taxicab Exhaust Emission Data Based on Cmem Modle

Science.gov (United States)

Li, Q.; Jia, T.

2017-09-01

Carbon dioxide emissions from urban road traffic mainly come from automobile exhaust. However, the carbon dioxide emissions obtained by the instruments are unreliable due to time delay error. In order to improve the reliability of data, we propose a method to correct the measured vehicles' carbon dioxide emissions from instrument based on the CMEM model. Firstly, the synthetic time series of carbon dioxide emissions are simulated by CMEM model and GPS velocity data. Then, taking the simulation data as the control group, the time delay error of the measured carbon dioxide emissions can be estimated by the asynchronous correlation analysis, and the outliers can be automatically identified and corrected using the principle of DTW algorithm. Taking the taxi trajectory data of Wuhan as an example, the results show that (1) the correlation coefficient between the measured data and the control group data can be improved from 0.52 to 0.59 by mitigating the systematic time delay error. Furthermore, by adjusting the outliers which account for 4.73 % of the total data, the correlation coefficient can raise to 0.63, which suggests strong correlation. The construction of low carbon traffic has become the focus of the local government. In order to respond to the slogan of energy saving and emission reduction, the distribution of carbon emissions from motor vehicle exhaust emission was studied. So our corrected data can be used to make further air quality analysis.

Essays on Competition and Innovations in the Automobile Markets

OpenAIRE

Leheyda, Nina

2007-01-01

The central focus of my dissertation has been on the investigation of developments towards more competitive and innovative firm behaviour in the global automobile markets. The automobile companies meet each other in many product and geographical markets worldwide. A large proportion of their production is outside of their "home" country. In my work I focus on international most important car markets, namely US, European and German as the most important single European car market and a very in...

Portable Exhauster Position Paper

International Nuclear Information System (INIS)

KRISKOVICH, J.R.

1999-01-01

This document identifies the tasks that are involved in preparing the ''standby'' portable exhauster to support Interim Stabilization's schedule for saltwell pumping. A standby portable exhaust system will be assigned to any facility scheduled to be saltwell pumped with the exception of 241-S farm, 241-SX farm or 241-T farm. The standby portable exhauster shall be prepared for use and placed in storage. The standby portable exhaust system shall be removed from storage and installed to ventilate tanks being pumped that reach 25% LFL. There are three tasks that are evaluated in this document. Each task shall be completed to support portable exhaust system installation and operation. They are: Pre Installation Task; Portable Exhaust System Storage Task; and Portable Exhaust System Installation and Operation Task

In utero exposure to a low concentration of diesel exhaust affects spontaneous locomotor activity and monoaminergic system in male mice

Directory of Open Access Journals (Sweden)

Odagiri Takashi

2010-03-01

Full Text Available Abstract Background Epidemiological studies have suggested that suspended particulate matter (SPM causes detrimental health effects such as respiratory and cardiovascular diseases, and that diesel exhaust particles from automobiles is a major contributor to SPM. It has been reported that neonatal and adult exposure to diesel exhaust damages the central nervous system (CNS and induces behavioral alteration. Recently, we have focused on the effects of prenatal exposure to diesel exhaust on the CNS. In this study, we examined the effects of prenatal exposure to low concentration of diesel exhaust on behaviour and the monoaminergic neuron system. Spontaneous locomotor activity (SLA and monoamine levels in the CNS were assessed. Methods Mice were exposed prenatally to a low concentration of diesel exhaust (171 μg DEP/m3 for 8 hours/day on gestational days 2-16. SLA was assessed for 3 days in 4-week-old mice by analysis of the release of temperature-associated infrared rays. At 5 weeks of age, the mice were sacrificed and the brains were used for analysis by high-performance liquid chromatography (HPLC. Results and Discussion Mice exposed to a low concentration of diesel exhaust showed decreased SLA in the first 60 minutes of exposure. Over the entire test period, the mice exposed prenatally to diesel exhaust showed decreased daily SLA compared to that in control mice, and the SLA in each 3 hour period was decreased when the lights were turned on. Neurotransmitter levels, including dopamine and noradrenaline, were increased in the prefrontal cortex (PFC in the exposure group compared to the control group. The metabolites of dopamine and noradrenaline also increased in the PFC. Neurotransmitter turnover, an index of neuronal activity, of dopamine and noradrenaline was decreased in various regions of the CNS, including the striatum, in the exposure group. The serum corticosterone level was not different between groups. The data suggest that decreased

Atmospheric pollution coming from automobiles and public health

International Nuclear Information System (INIS)

Chiron, M.; Quenel, Ph.; Zmirou, D.

1997-01-01

The air pollution coming from automobile is responsible of different diseases in respiratory or cardiovascular system. epidemiological studies in professional or general media give information in term of public health. If the role of air pollution from automobile at short terms is well established, for effects at long term (such cancers or chronic diseases of respiratory system) the measurement or estimation of the exposure is not sufficient for the moment and makes the epidemiology unable to quantify effects. In spite of these lacks, it is important to reduce the risk for the most fragile people. (N.C.)

Substance flow analysis and environmental releases of PBDEs in life cycle of automobiles.

Science.gov (United States)

Choi, Jonghyun; Jang, Yong-Chul; Kim, Jong-Guk

2017-01-01

Polybrominated diphenyl ethers (PBDEs), a class of brominated flame retardants, have been widely used in many applications in industry such as automobiles, textiles, and electronics. This study focused on a quantitative substance flow analysis (SFA) of PBDEs in automobiles in order to identify their flow by life cycle and treatment pathways of PBDEs-containing materials in end-of-life vehicles (ELVs) in Korea. In addition, this study has estimated environmental releases of PBDEs in automobiles by life cycle in Korea. During this study, PBDEs were analyzed for the samples collected from several ELVs treatment facilities using X-ray fluorescence and gas chromatography/mass spectrometry (GC/MS) methods. The system boundary for SFA of PBDEs ranged from manufacturing/trade to disposal stage of automobiles by life cycle. Based on the result of the SFA, it was found that the amount of PBDEs in automobiles were the highest in use stage (7748ton/year), followed by production stage (1743ton/year) in 2014. In disposal stage, automobile shredded residues (ASR) and seat fabrics were the main components with relatively high levels of PBDEs in ELVs. The major treatment methods of such components included incineration (84%), energy recovery (9%), and landfilling (6%). This research indicates that PBDEs were emitted the highest amount from interior components during the use stage of automobiles, followed by recycling processes such as dismantling and shredding. This study suggests that PBDEs in ASR and seat fabrics should be properly managed to prevent the widespread dispersion in the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Integrated study for automobile wastes management and ...

African Journals Online (AJOL)

Administrator

Key words: Soil contamination, storm water treatment, emission testing, EPR, heavy metals. INTRODUCTION .... fractionation in soil profiles at automobile mechanic waste ...... The phyto-remediation technique modifies plants to take.

Chery Automobile: Chinese Firms catching up

NARCIS (Netherlands)

Y. Zhang (Ying); S.Y. Yang (Sheng Yun)

2015-01-01

textabstractChery Automobile is a top Chinese car exporter. Due to the global financial crisis, intense competition, and fast technological change, Chery has seen decreasing sales domestically and diminishing opportunities abroad. The carmaker needs to figure out the next stage of strategic

Hinderniserkennung und -verfolgung mit einer PMD-kamera im automobil

Science.gov (United States)

Schamm, Thomas; Vacek, Stefan; Natroshvilli, Koba; Marius Zöllner, J.; Dillmann, Rüdiger

Die Detektion von Hindernissen vor dem Automobil ist eine Hauptanforderung an moderne Fahrerassistenzsysteme (FAS). In dieser Arbeit wird ein System vorgestellt, das mit Hilfe einer PMDKamera (Photomischdetektor) Hindernisse auf der Fahrspur erkennt und deren relevante Parameter bestimmt. Durch die PMD-Kamera werden zunächst 3D-Tiefenbilder der Fahrzeugumwelt generiert. Nach einem initialen Filterprozess werden im Tiefenbild mit Hilfe eines Bereichswachstumsverfahrens Hindernisse gesucht. Zur Stabilisierung des Verfahrens und zur Parameterberechnung wird ein Kaiman Filter eingesetzt. Das Ergebnis ist eine Liste aller Hindernisse im Fahrbereich des Automobils.

Use of powered electric vehicles in automobile fleets. Help elements for decision; Utilisation de vehicules electriques dans les flottes automobiles. Elements d`aide a la decision

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

One of the primary causes of degradation in the quality of urban life is automobile transportation. The introduction of electric vehicles within automobile fleets can help mitigate some of the associated impacts. This guide has assembled a set of technical tools vital to all fleet managers, whether they be with public-sector agencies or companies, who are involved in vehicle-purchasing decisions. It deals with the specific issues related to the use, maintenance and acquisition of electric vehicles. Besides those elements intended to convince both decision-makers and users alike, the automobile fleet manager will find herein, as a conclusion, some examples of comparative economic assessments. These serve to highlight the opportunities available for using electric vehicles in a wide variety of situations. (authors) 18 refs.

Local Exhaust Ventilation

DEFF Research Database (Denmark)

Madsen, Ulla; Breum, N. O.; Nielsen, Peter V.

Capture efficiency of a local exhaust system, e.g. a kitchen hood, should include only contaminants being direct captured. In this study basic concepts of local exhaust capture efficiency are given, based on the idea of a control box. A validated numerical model is used for estimation of the capt......Capture efficiency of a local exhaust system, e.g. a kitchen hood, should include only contaminants being direct captured. In this study basic concepts of local exhaust capture efficiency are given, based on the idea of a control box. A validated numerical model is used for estimation...

Lightweight Exhaust Manifold and Exhaust Pipe Ducting for Internal Combustion Engines

Science.gov (United States)

Northam, G. Burton (Inventor); Ransone, Philip O. (Inventor); Rivers, H. Kevin (Inventor)

1999-01-01

An improved exhaust system for an internal combustion gasoline-and/or diesel-fueled engine includes an engine exhaust manifold which has been fabricated from carbon- carbon composite materials in operative association with an exhaust pipe ducting which has been fabricated from carbon-carbon composite materials. When compared to conventional steel. cast iron. or ceramic-lined iron paris. the use of carbon-carbon composite exhaust-gas manifolds and exhaust pipe ducting reduces the overall weight of the engine. which allows for improved acceleration and fuel efficiency: permits operation at higher temperatures without a loss of strength: reduces the "through-the wall" heat loss, which increases engine cycle and turbocharger efficiency and ensures faster "light-off" of catalytic converters: and, with an optional thermal reactor, reduces emission of major pollutants, i.e. hydrocarbons and carbon monoxide.

Design of a TFT-LCD Based Digital Automobile Instrument

Directory of Open Access Journals (Sweden)

Yunsong Xu

2014-01-01

instrument and gives an introduction to the sampling circuits and interfaces related to these signals. Following this is the functional categorizing of the circuit modules, such as video buffer circuit, CAN bus interface circuit, and TFT-LCD drive circuit. Additionally, the external EEPROM stores information of the vehicle for history data query, and the external FLASH enables the display of high quality figures. On the whole, the accomplished automobile instrument meets the requirements of automobile instrument markets with its characters of low cost, favorable compatibility, friendly interfaces, and easy upgrading.

Acceptance test report for portable exhauster POR-007/Skid E

International Nuclear Information System (INIS)

Kriskovich, J.R.

1998-01-01

This document describes Acceptance Testing performed on Portable Exhauster POR-007/Skid E. It includes measurements of bearing vibration levels, pressure decay testing, programmable logic controller interlocks, high vacuum, flow and pressure control functional testing. The purpose of Acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-0490, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document

Demonstration tokamak power plant

International Nuclear Information System (INIS)

Abdou, M.; Baker, C.; Brooks, J.; Ehst, D.; Mattas, R.; Smith, D.L.; DeFreece, D.; Morgan, G.D.; Trachsel, C.

1983-01-01

A conceptual design for a tokamak demonstration power plant (DEMO) was developed. A large part of the study focused on examining the key issues and identifying the R and D needs for: (1) current drive for steady-state operation, (2) impurity control and exhaust, (3) tritium breeding blanket, and (4) reactor configuration and maintenance. Impurity control and exhaust will not be covered in this paper but is discussed in another paper in these proceedings, entitled Key Issues of FED/INTOR Impurity Control System

Application of Wireless Sensor Networks to Automobiles

Science.gov (United States)

Tavares, Jorge; Velez, Fernando J.; Ferro, João M.

2008-01-01

Some applications of Wireless Sensor Networks (WSNs) to the automobile are identified, and the use of Crossbow MICAz motes operating at 2.4 GHz is considered together with TinyOS support. These WSNs are conceived in order to measure, process and supply to the user diverse types of information during an automobile journey. Examples are acceleration and fuel consumption, identification of incorrect tire pressure, verification of illumination, and evaluation of the vital signals of the driver. A brief survey on WSNs concepts is presented, as well as the way the wireless sensor network itself was developed. Calibration curves were produced which allowed for obtaining luminous intensity and temperature values in the appropriate units. Aspects of the definition of the architecture and the choice/implementation of the protocols are identified. Security aspects are also addressed.

The inspection of components by X ray in real time in automobile industry

International Nuclear Information System (INIS)

Demandt, K.

1987-01-01

Besides a brief introduction to the state of the art of automobile components inspection by radiography in real time, some examples are discussed. New developments and a possible application for automobile components inspection by x-radiation are discussed. (E.G.) [pt

Rapid Genetic Adaptation during the First Four Months of Survival under Resource Exhaustion.

Science.gov (United States)

Avrani, Sarit; Bolotin, Evgeni; Katz, Sophia; Hershberg, Ruth

2017-07-01

Many bacteria, including the model bacterium Escherichia coli can survive for years within spent media, following resource exhaustion. We carried out evolutionary experiments, followed by whole genome sequencing of hundreds of evolved clones to study the dynamics by which E. coli adapts during the first 4 months of survival under resource exhaustion. Our results reveal that bacteria evolving under resource exhaustion are subject to intense selection, manifesting in rapid mutation accumulation, enrichment in functional mutation categories and extremely convergent adaptation. In the most striking example of convergent adaptation, we found that across five independent populations adaptation to conditions of resource exhaustion occurs through mutations to the three same specific positions of the RNA polymerase core enzyme. Mutations to these three sites are strongly antagonistically pleiotropic, in that they sharply reduce exponential growth rates in fresh media. Such antagonistically pleiotropic mutations, combined with the accumulation of additional mutations, severely reduce the ability of bacteria surviving under resource exhaustion to grow exponentially in fresh media. We further demonstrate that the three positions at which these resource exhaustion mutations occur are conserved for the ancestral E. coli allele, across bacterial phyla, with the exception of nonculturable bacteria that carry the resource exhaustion allele at one of these positions, at very high frequencies. Finally, our results demonstrate that adaptation to resource exhaustion is not limited by mutational input and that bacteria are able to rapidly adapt under resource exhaustion in a temporally precise manner through allele frequency fluctuations. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

The effect of airline deregulation on automobile fatalities.

Science.gov (United States)

Bylow, L F; Savage, I

1991-10-01

This paper attempts to quantify the effects of airline deregulation in the United States on intercity automobile travel and consequently on the number of highway fatalities. A demand model is constructed for auto travel, which includes variables representing the price and availability of air service. A reduced form model of the airline market is then estimated. Finding that deregulation has decreased airfares and increased flights, it is estimated that auto travel has been reduced by 2.2% per year on average. Given assumptions on the characteristics of drivers switching modes and the types of roads they drove on, the number of automobile fatalities averted since 1978 is estimated to be in the range 200-300 per year.

Automotive History and Development of the Automobile; Automotive Mechanics I: 9043.01.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

The automotive history and development of the automobile course is designed to familiarize the beginning student with basic concepts common to the automobile history and general information that is required for successful advancement in the automotive mechanics field. A course outline is provided and seven pages of post-tests are included in the…

Development of automobile distribution networks on the basis of multi-criteria evaluation of distribution channels

Directory of Open Access Journals (Sweden)

A. Vasilis Vasiliauskas

2010-12-01

Full Text Available .The days when a buyer was forced to choose from what is being offered have passed. These days, buyers demand a product that would answer their exclusive expectations at a time of their preference and at an acceptable price. Therefore, manufacturers aiming to survive the competition battle have to rethink their operation strategies. Special importance is attached to the process of development and reconstruction of supply chains, and the process which may feature particularities, depending on the branch of industry. Automobile manufacturing is the biggest the fastest industry developing across the globe. New automobiles are listed as luxury commodities and are, therefore, subjected to very strict requirements with regard to various logistic operations and technologies, which are vital for ensuring efficient automobile delivery to the final users. Due to the growing demand for brand-new automobiles and the distance to the user, automobile manufacturers are constantly searching for solutions to the development and support of an efficient distribution network. Strategy shaping of distribution network requires evaluation of a number of criteria, which influence the distribution system. The article analyzes the development of automobile distribution networks on the basis of multi-criteria evaluation of distribution channels.

Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

Directory of Open Access Journals (Sweden)

S. M. Chen

2011-01-01

created using hybrid FE-SEA method. The modal density was calculated using analytical method and finite element method; the damping loss factors of the structural and acoustic cavity subsystems were also calculated with analytical method; the coupling loss factors between structure and structure, structure and acoustic cavity were both calculated. Four different kinds of excitations including road excitations, engine mount excitations, sound radiation excitations of the engine, and wind excitations are exerted on the body of automobile when the automobile is running on the road. All the excitations were calculated using virtual prototype technology, computational fluid dynamics (CFD, and experiments realized in the design and development stage. The interior noise of the automobile was predicted and verified at speed of 120 km/h. The predicted and tested overall SPLs of the interior noise were 73.79 and 74.44 dB(A respectively. The comparison results also show that the prediction precision is satisfied, and the effectiveness and reliability of the hybrid FE-SEA model of the automobile is verified.

Topology Explains Why Automobile Sunshades Fold Oddly

Science.gov (United States)

Feist, Curtis; Naimi, Ramin

2009-01-01

Automobile sunshades always fold into an "odd" number of loops. The explanation why involves elementary topology (braid theory and linking number, both explained in detail here with definitions and examples), and an elementary fact from algebra about symmetric group.

Design of Automobile Driveshaft using Carbon/Epoxy and Kevlar/Epoxy Composites

OpenAIRE

R. Srinivasa Moorthy

2013-01-01

Use of advanced composites has resulted in remarkable achievements in many fields including aviation, marine and automobile engineering, medicine, prosthetics and sports, in terms of improved fatigue and corrosion resistances, high specific strength and specific modulus and reduction in energy requirements owing to reduction in weight. The aim of this work is to replace the conventional steel driveshaft of automobiles with an appropriate composite driveshaft. The conventional driveshafts ar...

CARCINOGENICITY OF EXHAUST GASES OF AUTOMOBILES

Directory of Open Access Journals (Sweden)

N. Vnukova

2011-01-01

Full Text Available Motor transport is the basic consumer of fuel from oil and determining in ecological pollu-tion of atmosphere in urban areas. The most dangerous to the person are joint influences of super toxins: oxides of nitrogen, cancerogenic hydrocarbons and firm particles. It is shown that the use of modern fuel with increased contents of aromatic hydrocarbons aggravates this environmental problem.

Evaluation of malodor for automobile air conditioner evaporator by using laboratory-scale test cooling bench.

Science.gov (United States)

Kim, Kyung Hwan; Kim, Sun Hwa; Jung, Young Rim; Kim, Man Goo

2008-09-12

As one of the measures to improve the environment in an automobile, malodor caused by the automobile air-conditioning system evaporator was evaluated and analyzed using laboratory-scale test cooling bench. The odor was simulated with an evaporator test cooling bench equipped with an airflow controller, air temperature and relative humidity controller. To simulate the same odor characteristics that occur from automobiles, one previously used automobile air conditioner evaporator associated with unpleasant odors was selected. The odor was evaluated by trained panels and collected with aluminum polyester bags. Collected samples were analyzed by thermal desorption into a cryotrap and subsequent gas chromatographic separation, followed by simultaneous olfactometry, flame ionization detector and identified by atomic emission detection and mass spectrometry. Compounds such as alcohols, aldehydes, and organic acids were identified as responsible odor-active compounds. Gas chromatography/flame ionization detection/olfactometry combined sensory method with instrumental analysis was very effective as an odor evaluation method in an automobile air-conditioning system evaporator.

Exhaustion from prolonged gambling

Directory of Open Access Journals (Sweden)

Fatimah Lateef

2013-01-01

Full Text Available Complaints of fatigue and physical exhaustion are frequently seen in the acute medical setting, especially amongst athletes, army recruits and persons involved in strenuous and exertional physical activities. Stress-induced exhaustion, on the other hand, is less often seen, but can present with very similar symptoms to physical exhaustion. Recently, three patients were seen at the Department of Emergency Medicine, presenting with exhaustion from prolonged involvement in gambling activities. The cases serve to highlight some of the physical consequences of prolonged gambling.

Data-Driven Neural Network Model for Robust Reconstruction of Automobile Casting

Science.gov (United States)

Lin, Jinhua; Wang, Yanjie; Li, Xin; Wang, Lu

2017-09-01

In computer vision system, it is a challenging task to robustly reconstruct complex 3D geometries of automobile castings. However, 3D scanning data is usually interfered by noises, the scanning resolution is low, these effects normally lead to incomplete matching and drift phenomenon. In order to solve these problems, a data-driven local geometric learning model is proposed to achieve robust reconstruction of automobile casting. In order to relieve the interference of sensor noise and to be compatible with incomplete scanning data, a 3D convolution neural network is established to match the local geometric features of automobile casting. The proposed neural network combines the geometric feature representation with the correlation metric function to robustly match the local correspondence. We use the truncated distance field(TDF) around the key point to represent the 3D surface of casting geometry, so that the model can be directly embedded into the 3D space to learn the geometric feature representation; Finally, the training labels is automatically generated for depth learning based on the existing RGB-D reconstruction algorithm, which accesses to the same global key matching descriptor. The experimental results show that the matching accuracy of our network is 92.2% for automobile castings, the closed loop rate is about 74.0% when the matching tolerance threshold τ is 0.2. The matching descriptors performed well and retained 81.6% matching accuracy at 95% closed loop. For the sparse geometric castings with initial matching failure, the 3D matching object can be reconstructed robustly by training the key descriptors. Our method performs 3D reconstruction robustly for complex automobile castings.

Application of Chemometric Techniques to Colorimetric Data in Classifying Automobile Paint

International Nuclear Information System (INIS)

Nur Awatif Rosli; Rozita Osman; Norashikin Saim; Mohd Zuli Jaafar

2015-01-01

The analysis of paint chips is of great interest to forensic investigators, particularly in the examination of hit-and run cases. This study proposes a direct and rapid method in classifying automobile paint samples based on colorimetric data sets; absorption value, reflectance value, luminosity value (L), degree of redness (a) and degree of yellowness (b) obtained from video spectral comparator (VSC) technique. A total of 42 automobile paint samples from 7 manufacturers were analysed. The colorimetric datasets obtained from VSC analysis were subjected to chemometric technique namely cluster analysis (CA) and principal component analysis (PCA). Based on CA, 5 clusters were generated; Cluster 1 consisted of silver color, cluster 2 consisted of white color, cluster 3 consisted of blue and black colors, cluster 4 consisted of red color and cluster 5 consisted of light blue color. PCA resulted in two latent factors explaining 95.58 % of the total variance, enabled to group the 42 automobile paints into five groups. Chemometric application on colorimetric datasets provide meaningful classification of automobile paints based on their tone colour (L, a, b) and light intensity These approaches have the potential to ease the interpretation of complex spectral data involving a large number of comparisons. (author)

A basic study on universal design of auditory signals in automobiles.

Science.gov (United States)

Yamauchi, Katsuya; Choi, Jong-dae; Maiguma, Ryo; Takada, Masayuki; Iwamiya, Shin-ichiro

2004-11-01

In this paper, the impression of various kinds of auditory signals currently used in automobiles and a comprehensive evaluation were measured by a semantic differential method. The desirable acoustic characteristic was examined for each type of auditory signal. Sharp sounds with dominant high-frequency components were not suitable for auditory signals in automobiles. This trend is expedient for the aged whose auditory sensitivity in the high frequency region is lower. When intermittent sounds were used, a longer OFF time was suitable. Generally, "dull (not sharp)" and "calm" sounds were appropriate for auditory signals. Furthermore, the comparison between the frequency spectrum of interior noise in automobiles and that of suitable sounds for various auditory signals indicates that the suitable sounds are not easily masked. The suitable auditory signals for various purposes is a good solution from the viewpoint of universal design.

Hydrogen: implications for the future automobile

International Nuclear Information System (INIS)

Frise, P. R.; Woodward, W.

2004-01-01

'Full text:' The presentation will focus upon the challenges within the automotive manufacturing industry related to the hydrogen fuelled automobile of the future. Challenges and opportunities include issues of power train design and packaging as well as on-road performance capabilities, fuel system packaging and materials for body structures. Due to the size and complexity of the automotive sector, technology changes tend to be evolutionary rather than revolutionary, but changes are being made to today's cars in preparation for the evolution toward the future hydrogen automobile. Real world applications of new technologies will be described that are assisting automakers to prepare for the hydrogen future today. The work will be described in the context of AUTO21, a national Network of Centres of Excellence (NCE), is helping to position Canada as a leader in automotive research and development. More than 250 researchers in 34 Canadian universities and over 110 industry and government partners contribute to AUTO21 through applied research projects in six themes of study ranging from health and societal issues to pure engineering applications. (author)

The System Dynamics of U.S. Automobile Fuel Economy

Directory of Open Access Journals (Sweden)

Todd K. BenDor

2012-05-01

Full Text Available This paper analyzes the dynamics of U.S. automobile gasoline consumption since 1975. Using background literature on the history of domestic fuel economy and energy policy, I establish a conceptual model that explains historical trends in adoption of increased fuel economy. I then create a system dynamics simulation model to understand the relationship between increased fuel economy standards and potential changes to gas tax policies. The model suggests that when increases in mandated fuel economy are not conducted in an environment with rising fuel costs, fuel economy improvements may be directly counteracted by shifting tastes of consumers towards larger automobiles with lower fuel economy.

The automobile after tomorrow

Energy Technology Data Exchange (ETDEWEB)

Guzzella, L [Swiss Federal Inst. of Technology (ETH), Zurich (Switzerland)

1996-11-01

This talk discusses the technical options available for automobiles within the next 5 to 10 years. With the objective to reduce consumption and pollution, several alternative approaches are presented and analyzed using simplified but realistic calculations. Main emphasis is laid on CO{sub 2} emission of the complete energy transformation path from the primary energy carrier to the energy dissipated in test cycles. It is shown that no single optimal solution exist but that a trade-off between consumption, pollution and cost must be made for each specific situation. (author) 17 figs., 2 tabs.

Research on the Bionics Design of Automobile Styling Based on the Form Gene

Science.gov (United States)

Aili, Zhao; Long, Jiang

2017-09-01

From the heritage of form gene point of view, this thesis has analyzed the gene make-up, cultural inheritance and aesthetic features in the evolution and development of forms of brand automobiles and proposed the bionic design concept and methods in the automobile styling design. And this innovative method must be based on the form gene, and the consistency and combination of form element must be maintained during the design. Taking the design of Maserati as an example, the thesis will show you the design method and philosophy in the aspects of form gene expression and bionic design innovation for the future automobile styling.

Spatial distribution and landuse planning of informal automobile ...

African Journals Online (AJOL)

Spatial distribution and landuse planning of informal automobile workshops in Osogbo, ... data pertaining to the activities and other related issues of their workshops. ... The study therefore, recommends the establishment of mechanic complex, ...

Prelaunch Forecasting of New Automobiles

OpenAIRE

Glen L. Urban; John R. Hauser; John H. Roberts

1990-01-01

This paper develops and applies a prelaunch model and measurement system to the marketing planning of a new automobile. The analysis addresses active search by consumers, dealer visits, word-of-mouth communication, magazine reviews, and production constraints---issues that are important in understanding consumer response to durable goods. We address these issues with a detailed consumer flow model which monitors and projects key consumer transitions in response to marketing actions. A test-vs...

Design and Experimental Study of an Over-Under TBCC Exhaust System.

Science.gov (United States)

Mo, Jianwei; Xu, Jinglei; Zhang, Liuhuan

2014-01-01

Turbine-based combined-cycle (TBCC) propulsion systems have been a topic of research as a means for more efficient flight at supersonic and hypersonic speeds. The present study focuses on the fundamental physics of the complex flow in the TBCC exhaust system during the transition mode as the turbine exhaust is shut off and the ramjet exhaust is increased. A TBCC exhaust system was designed using methods of characteristics (MOC) and subjected to experimental and computational study. The main objectives of the study were: (1) to identify the interactions between the two exhaust jet streams during the transition mode phase and their effects on the whole flow-field structure; (2) to determine and verify the aerodynamic performance of the over-under TBCC exhaust nozzle; and (3) to validate the simulation ability of the computational fluid dynamics (CFD) software according to the experimental conditions. Static pressure taps and Schlieren apparatus were employed to obtain the wall pressure distributions and flow-field structures. Steady-state tests were performed with the ramjet nozzle cowl at six different positions at which the turbine flow path were half closed and fully opened, respectively. Methods of CFD were used to simulate the exhaust flow and they complemented the experimental study by providing greater insight into the details of the flow field and a means of verifying the experimental results. Results indicated that the flow structure was complicated because the two exhaust jet streams interacted with each other during the exhaust system mode transition. The exhaust system thrust coefficient varied from 0.9288 to 0.9657 during the process. The CFD simulation results agree well with the experimental data, which demonstrated that the CFD methods were effective in evaluating the aerodynamic performance of the TBCC exhaust system during the mode transition.

A new method for controlling refrigerant flow in automobile air conditioning

Energy Technology Data Exchange (ETDEWEB)

Xuquan Li; Jiangping Chen; Zhijiu Chen [Shanghai Jiao Tong University (China). Institute of Refrigeration and Cryogenics Engineering; Weihua Liu; Wei Hu; Xiaobing Liu [Shanghai Delphi Automotive Air Conditiong Systems Co. Ltd., Changhai (China)

2004-05-01

This paper describes the improvement of the refrigerant flow control method by using an electronic expansion valve (EEV) which is driven by a stepper motor in automobile air conditioning system. An EEV can make a quick response to the abrupt change in the refrigerant flow rate during the change in automobile speed and the thermostatic on/off operation. The flow rate characteristic of the EEV for automobile air conditioning was presented. A microcontroller is used to receive the input signal and generate the output signal to control the opening of the EEV. The fuzzy self-tuning proportional-integral-derivative (PID) control method is employed. Experimental results show that the new control method can feed adequate refrigerant flow into the evaporator in various operations. The evaporator discharge air temperature has dropped by approximately 3{sup o}C as compared with that of the conventional PID control system. (author)

A Tractor or an Automobile? A 1920s Farm Family Faces a Decision.

Science.gov (United States)

Kunze, Joel P.

1991-01-01

Outlines a lesson plan in which students role play a 1920s farm family deciding whether to buy an automobile or a tractor. Other students act as automobile and tractor sales groups. Explains how the lesson illuminates relationships between technological advance and social history. Includes handouts identifying benefits of purchasing cars or…

Unemployment Benefit Exhaustion

DEFF Research Database (Denmark)

Filges, Trine; Pico Geerdsen, Lars; Knudsen, Anne-Sofie Due

2015-01-01

This systematic review studied the impact of exhaustion of unemployment benefits on the exit rate out of unemployment and into employment prior to benefit exhaustion or shortly thereafter. Method: We followed Campbell Collaboration guidelines to prepare this review, and ultimately located 12...

Semiconductor industry wafer fab exhaust management

CERN Document Server

Sherer, Michael J

2005-01-01

Given the myriad exhaust compounds and the corresponding problems that they can pose in an exhaust management system, the proper choice of such systems is a complex task. Presenting the fundamentals, technical details, and general solutions to real-world problems, Semiconductor Industry: Wafer Fab Exhaust Management offers practical guidance on selecting an appropriate system for a given application. Using examples that provide a clear understanding of the concepts discussed, Sherer covers facility layout, support facilities operations, and semiconductor process equipment, followed by exhaust types and challenges. He reviews exhaust point-of-use devices and exhaust line requirements needed between process equipment and the centralized exhaust system. The book includes information on wet scrubbers for a centralized acid exhaust system and a centralized ammonia exhaust system and on centralized equipment to control volatile organic compounds. It concludes with a chapter devoted to emergency releases and a separ...

Legislative Committee Simulation: Regulation in the Automobile Industry.

Science.gov (United States)

Hoffman, Alan J.; And Others

1983-01-01

Examined are ways to overcome obstacles which often prevent creative teaching of legislative decision-making processes to high school students. A simulation dealing with regulation in the automobile industry is used for illustrative purposes. (RM)

Electrochemical cell with integrated hydrocarbon gas sensor for automobile exhaust gas; Elektrochemische Zelle mit integriertem Kohlenwasserstoff-Gassensor fuer das Automobilabgas

Energy Technology Data Exchange (ETDEWEB)

Biskupski, D.; Moos, R. [Univ. Bayreuth (Germany). Bayreuth Engine Research Center, Lehrstuhl fuer Funktionsmaterialien; Wiesner, K.; Fleischer, M. [Siemens AG, Corporate Technology, CT PS 6, Muenchen (Germany)

2007-07-01

In the future sensors will be necessary to control the compliance with hydrocarbon limiting values, allowing a direct detection of the hydrocarbons. Appropriate sensor-active functional materials are metal oxides, which have a hydrocarbon sensitivity but are also dependent on the oxygen partial pressure. It is proposed that the gas-sensing layer should be integrated into an electrochemical cell. The authors show that the integration of a resistive oxygen sensor into a pump cell allows a defined oxygen concentration level at the sensor layer in any exhaust gas.

Designing carbon taxation schemes for automobiles: A simulation exercise for Germany

OpenAIRE

Adamou, Adamos; Clerides, Sofronis; Zachariadis, Theodoros

2011-01-01

Vehicle taxation based on CO2 emissions is increasingly being adopted worldwide in order to shift consumer purchases to low-carbon cars, yet little is known about the effectiveness and overall economic impact of these schemes. We focus on feebate schemes, which impose a fee on high-carbon vehicles and give a rebate to purchasers of low-carbon automobiles. We estimate a discrete choice model of demand for automobiles in Germany and simulate the impact of alternative feebate schemes on emission...

High energy X-ray CT system using a linear accelerator for automobile parts inspection

International Nuclear Information System (INIS)

Kanamori, T.; Sukita, T.

1995-01-01

A high energy X-ray CT system (maximum photon energy: 0.95 MeV) has been developed for industrial use. This system employs a linear accelerator as an X-ray source. It is able to image the cross section of automobile parts and can be applied to a solidification analysis study of the cylinder head in an automobile. This paper describes the features of the system and application results which can be related to solidification analysis of the cylinder head when fabricated from an aluminum casting. Some cross-sectional images are also presented as evidence for nondestructive inspection of automobile parts. (orig.)

Automobile industry and globalization in Asian market; Asia ni okeru jidosha sangyo to globalization

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

Asian countries are now attracting attention of automobile manufacturers of the world for their capabilities of buying, producing, and assembling of automobiles, and producing and supplying of parts, which means that the Asian market is now exposed to globalization. As for the automobile and part manufacturers of Japan, in the presence of economic depression lingering in Asia affecting motorization and rapid changes in the circumstances Japan`s automobile industry finds itself under, are pressed to work out new strategies as a member of the Asian community. A panel discussion of the same name as the subject held in 1997 won favor as a fine initiative to suitably cope with the difficult situation. Useful suggestions and proposals were made concerning the panel discussion, calling the event a new type of round-table talks well responding to the rapid changes in the world economy since 1997, by learned and experienced people, the government offices concerned, staffers of manufacturers in charge of overseas marketing, and international information analysts. They related to the current state and tasks of automobile manufacturing in Asia, trends of regulations and standardization, rolls of technical assistance and the Society of Automotive Engineers of Japan, Ltd., expressed from a wide angle covering various problems relative to environmental protection, safety, etc. (NEDO)

Automobile technology of the future

International Nuclear Information System (INIS)

Seiffert, U.; Walzer, P.

1990-01-01

Looking ahead to the year 2000, this fascinating publication takes an in-depth look at new technology which will impact the passenger car of tomorrow. New developments in the areas of performance, reliability, comfort, fuel economy, safety, and environmental compatibility are examined. In this book the authors offer analysis on subjects such as the impact of legislation, the acceptance of ABS, and features of the future dashboard. Offering insight to readers with both technical and general interest in automobiles

UNICEF and automobile CO2 negotiation

Energy Technology Data Exchange (ETDEWEB)

Woo, Seok Hun [Korea Energy Management Corporation, Yongin (Korea)

2000-06-01

The EU automobile negotiation was very suggestive since it was the first international trade negotiation related with UNFCCC. It generated considerable reactions in association with {sup v}oluntary negotiation{sup i}n semiconductor sector. Most of all, such a new car negotiation shows well that it is hard to free from global environmental responsibilities even for a company in a developing country in UNFCCC.

CHINESE AUTOMOBILE ENTERPRISE STRATEGY ANALYSIS

OpenAIRE

Phd. Candidate Mrs. Chai Feng xia

2015-01-01

China's auto industry also had a golden decade of explosive growth. In 2009, China's auto market has exceeded the United States, the wo rld's largest car market, and in 2013, China's auto production both breaks t hrough twenty million. However, through the presentation of China's auto m arket booming, we should be acutely aware that the status of China's automobile industry in the global automotive industry value chain is still very low, this paper did analysis regarding the current situation...

Concept and ripple effect of negotiation for automobile CO{sub 2} emission regulation

Energy Technology Data Exchange (ETDEWEB)

Han, Hwa Jin [Korea Environment Institute, Seoul (Korea)

2000-06-01

The present average of automobile CO{sub 2} emission in Korea is about 220g/km, so it is hard to achieve reduction goal concluded with EU with present technology capability. In such a situation, it is required a long-term R and D strategy on direct jet engine, hybrid engine, diesel automobile development and other mileage improving technology which need huge initial investment cost. Furthermore, the efforts on alternative fuel automobile technology are needed. When a long-term strategy of corporation and a competitiveness policy of government are integrated properly, then it is possible to establish two goals, environmental protection and maintenance of industrial competitiveness, simultaneously. However, the emission reduction goal that is proposed by EU is still too high to achieve for Korean companies.

Report for fiscal 2000. Part 4. Research on assistance to put recycling technologies into practical use (Research and development of elevating automotive fuel consumption and exhaust gas technologies); 2000 nendo recycle gijutsu nado jitsuyoka shien kenkyu hokokusho. 4. Jidosha nenpi hai gas gijutsu kodoka kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Discussions have been given on identification of actual status of exhaust gas emission during driving, starting, and idling of automobiles, on technologies to enhance fuel consumption and reduce exhaust gas emission, and on technologies to measure harmful substances. In the investigation of effects of environmental temperatures on evaporation gas, it was shown that fuel evaporation generated from the fuel tank increases as the average ambient temperature rises. In the investigation of effects of environmental temperatures on exhaust gas and fuel consumption, it was discovered that the effects of environmental temperatures on 10{center_dot}15 mode regulated exhaust gas differ depending on vehicles, and no definite difference due to combustion systems was recognized. Carbon monoxide and THC under the 11 mode regulation showed a trend to increase when the environmental temperature falls down. In the investigation of effects of fuel properties on exhaust gas, no definite difference due to combustion systems was recognized as a result of measurements using various types of gasoline having different distillation properties. In the investigation of analysis methods for harmful substances, development has been made on an analysis method mainly for 1-3 butadiene. (NEDO)

Subjective measures of work-related fatigue in automobile factory employees.

Science.gov (United States)

Guo, Fu; Wang, Tianbo; Ning, Zuojiang

2017-01-01

Work-related fatigue is common among automobile factory employees. The purpose of this study was to assess fatigue of employees at a Chinese automobile factory. 238 employees (119 engineers and 119 workers) participated in this study. The following questionnaires were completed: demographic survey questionnaire, working condition questionnaire (WCQ), functional assessment of chronic illness therapy-fatigue (FACIT-F), subscales of multidimensional fatigue inventory (MFI), and Pittsburgh sleep quality index (PSQI). Both engineers and workers experienced fatigue. The workers (35.6 years old, SD = 6.7) generally felt more fatigue than engineers (42.6 years old, SD = 6.4). The engineers claimed to be more satisfied with the working conditions than workers. The WCQ showed good properties for assessing work-related factors, which were significantly correlated with fatigue (r = 0.568 for engineers and r = 0.639 for workers). For engineers, general fatigue was observed regularly and frequently, and for workers, physical fatigue usually had a long duration. The fatigue was significantly correlated with work-related factors, especially working environment and monotony. For workers, the duration of the work day also affected their fatigue. Some improvements to the working condition in this automobile factory should be considered.

46 CFR 169.609 - Exhaust systems.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Exhaust systems. 169.609 Section 169.609 Shipping COAST... Electrical Internal Combustion Engine Installations § 169.609 Exhaust systems. Engine exhaust installations... Yacht Council, Inc. Standard P-1, “Safe Installation of Exhaust Systems for Propulsion and Auxiliary...

Gas turbine exhaust system silencing design

International Nuclear Information System (INIS)

Ozgur, D.

1991-01-01

Gas turbines are the preferred prime mover in many applications because of their high efficiency, fuel flexibility, and low environmental impact. A typical mid-size machine might have a power rating of 80 MW, a flow of about 1000 kg/hr, and an exhaust temperature of over 500C. The most powerful single source of noise is generally the exhaust, which may generate over a kilowatt of acoustic energy. This paper reports that there are two important ways in which exhaust systems can radiate noise. The first is through the discharge of the exhaust duct, with the exhaust gas. Because of the large quantity of hot gas, the duct exit is always oriented vertically; it may be fairly high in the air in order to promote dispersion of the exhaust plume. This source is almost always attenuated by means of a silencer located somewhere in the ductwork. The second source of noise is often called breakout; it is the radiation of exhaust noise through the walls of the ducting. Breakout is most important for those sections of the exhaust duct which lie upstream of the silencer, where sound levels inside the ducting are highest. Both exhaust duct exit noise and breakout noise can be calculated from the sound power level of the gas turbine exhaust and the sound transmission loss (TL) of the silencer and ducting

49 CFR 325.91 - Exhaust systems.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Exhaust systems. 325.91 Section 325.91... EMISSION STANDARDS Exhaust Systems and Tires § 325.91 Exhaust systems. Link to an amendment published at 75 FR 57193, Sept. 20, 2010. A motor vehicle does not conform to the visual exhaust system inspection...

EXPOSURE TO ACROLEIN BY INHALATION CAUSES PLATELET ACTIVATION

OpenAIRE

Sithu, Srinivas D; Srivastava, Sanjay; Siddiqui, Maqsood A; Vladykovskaya, Elena; Riggs, Daniel W; Conklin, Daniel J; Haberzettl, Petra; O’Toole, Timothy E; Bhatnagar, Aruni; D’Souza, Stanley E

2010-01-01

Acrolein is a common air pollutant that is present in high concentrations in wood, cotton, and tobacco smoke, automobile exhaust and industrial waste and emissions. Exposure to acrolein containing environmental pollutants such as tobacco smoke and automobile exhaust has been linked to the activation of the coagulation and hemostasis pathways and thereby to the predisposition of thrombotic events in human. To examine the effects of acrolein on platelets, adult male C57Bl/6 mice were subjected ...

Daredevils and early birds: Belgian pioneers in automobile racing and aerial sports during the belle époque.

Science.gov (United States)

Ameye, Thomas; Gils, Bieke; Delheye, Pascal

2011-01-01

During the belle époque, Belgium was a trend-setting nation in many domains, including motorised sports. Belgian automobile racers and pilots shattered world records and became international stars. Striking was the shift in sports. Indeed, around 1896, sporting members of the leisure class stepped from the bicycle into the automobile and, around 1908, from the automobile into the airplane. Although these motorised sports were extremely expensive, this article shows that sportsmen and sportswomen from the working class could achieve upward social mobility through their performances. The achievements of these motorised pioneers had a major impact and wide-ranging significance. They laid the foundations for the expansion of the automobile industry and the emergence of civilian and military aviation.

Cross-Border Labor Organizing in the Garment and Automobile Industries: The Phillips Van-Heusen and Ford Cuautitlan Cases

Directory of Open Access Journals (Sweden)

Ralph Armbruster

2015-08-01

Full Text Available The globalization of the world economy has created new opportunities for cross-border labor organizing. In this paper I examine two case studies of cross -border labor organizing. One case involves Phillips Van-Hernen (PVH workers in Guatemala City, and the other Ford automobile workers in Cuautitlan, Mexico. The PVH case illustrates the potential for cross-border labor organizing in the highly mobile garment industry. The PVH workers' union and their cross-border allies adopted a "strategic cross-border organizing model" that included consumer and trade pressure, an active international trade secretariat, and several other strategies, to achieve an amazing victory. However, the Ford Cuautitlan case demonstrates that corporatist state-labor relations and internal union conflicts have limited cross-border organizing in the automobile industry. These two case studies and their different outcomes have many important lessons for academics and activists interested in cross-border labor organizing.

Managing bottlenecks in manual automobile assembly systems using discrete event simulation

Directory of Open Access Journals (Sweden)

Dewa, M.

2013-08-01

Full Text Available Batch model lines are quite handy when the demand for each product is moderate. However, they are characterised by high work-in-progress inventories, lost production time when changing over models, and reduced flexibility when it comes to altering production rates as product demand changes. On the other hand, mixed model lines can offer reduced work-in-progress inventory and increased flexibility. The object of this paper is to illustrate that a manual automobile assembling system can be optimised through managing bottlenecks by ensuring high workstation utilisation, reducing queue lengths before stations and reducing station downtime. A case study from the automobile industry is used for data collection. A model is developed through the use of simulation software. The model is then verified and validated before a detailed bottleneck analysis is conducted. An operational strategy is then proposed for optimal bottleneck management. Although the paper focuses on improving automobile assembly systems in batch mode, the methodology can also be applied in single model manual and automated production lines.

Advanced exhaust nozzle technology

Energy Technology Data Exchange (ETDEWEB)

Glidewell, R J; Warburton, R E

1981-01-01

Recent developments in turbine engine exhaust nozzle technology include nonaxisymmetric nozzles, thrust reversing, and thrust vectoring. Trade studies have been performed to determine the impact of these developments on the thrust-to-weight ratio and specific fuel consumption of an advanced high performance, augmented turbofan engine. Results are presented in a manner which provides an understanding of the sources and magnitudes of differences in the basic elements of nozzle internal performance and weight as they relate to conventional, axisymmetric nozzle technology. Conclusions are presented and recommendations are made with regard to future directions of advanced development and demonstration. 5 refs.

Discussion of the effects of recirculating exhaust air on performance and efficiency of a typical microturbine

International Nuclear Information System (INIS)

De Paepe, Ward; Delattin, Frank; Bram, Svend; De Ruyck, Jacques

2012-01-01

This paper reports on a specific phenomenon, noticed during steam injection experiments on a microturbine. During the considered experiments, measurements indicated an unsteady inlet air temperature of the compressor, resulting in unstable operation of the microturbine. Non-continuous exhaust air recirculation was a possible explanation for the observed behaviour of the microturbine. The aim of this paper is to investigate and demonstrate the effects of exhaust recirculation on a microgasturbine. Depending on wind direction, exhaust air re-entered the engine, resulting in changing inlet conditions which affects the operating regime of the microturbine. For this paper, a series of experiments were performed in the wind tunnel. These series of experiments allowed investigation of the effect of the wind direction on flue gasses flow. Next to the experiments, steady-state simulations of exhaust recirculation were performed in order to study the effect of exhaust recirculation on thermodynamic performance of the microturbine. Dynamic simulations of the non-continuous recirculation revealed the effects of frequency and amplitude on average performance and stability. Results from simulations supported the important impact of exhaust recirculation. Wind tunnel tests demonstrated the influence of the wind direction on recirculation and revealed the necessity to heighten the stack, thus preventing exhaust recirculation. -- Highlights: ► Unstable operation of a T100 microturbine during steam injection tests was noticed, caused by exhaust gas recirculation. ► Wind tunnel tests were performed to study the effect of the wind direction on the recirculation process. ► Steady-state simulations to investigate the effect of exhaust gas recirculation on thermodynamic performance. ► Dynamic simulations to reveal effects of frequency and amplitude on average performance and stability. ► Wind tunnel tests revealed the necessity to heighten the stack to prevent exhaust

THE ROLE OF AUTOMOBILE TRANSPORT IN HUBS SERVICE

Directory of Open Access Journals (Sweden)

Kirill Iurievich Bely

2015-09-01

Full Text Available Article contains approaches to development and functioning of transport-logistic nodes – hubs – in modern conditions. There is hub classification and examples of them on different transport modes. An important component in providing reliability of hub work is automobile transport.

Performance evaluation of effluent treatment plant for automobile industry

Energy Technology Data Exchange (ETDEWEB)

Ansari, Farid [Department of Applied Science and Humanities, PDM College of Engineering, Bahadurgarh (Haryana) (India); Pandey, Yashwant K. [School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore (India); Kumar, P.; Pandey, Priyanka [Department of Environmental Science, Post Graduate College Ghazipur (IN

2013-07-01

The automobile industry’s wastewater not only contains high levels of suspended and total solids such as oil, grease, dyestuff, chromium, phosphate in washing products, and coloring, at various stages of manufacturing but also, a significant amount of dissolved organics, resulting in high BOD or COD loads. The study reveals the performance, evaluation and operational aspects of effluent treatment plant and its treatability, rather than the contamination status of the real property. The Results revealed that the treated effluent shows most of the parameters are within permissible limits of Central Pollution Control Board (CPCB), India and based on the site visits, discussion with operation peoples, evaluation of process design, treatment system, existing effluent discharge, results of sample analyzed and found that effluent treatment plant of automobile industry are under performance satisfactory.

Getting older can be exhausting.

Science.gov (United States)

Mittal, Rohit; Ford, Mandy L; Coopersmith, Craig M

2014-07-29

Sepsis is a disease that affects primarily the aged. Although mortality is higher in both older septic patients and aged septic mice, the mechanisms underlying decreased survival in older hosts are incompletely understood. New work by Inoue and colleagues demonstrates persistent inflammation and T-cell exhaustion in older septic patients and aged septic mice. The clinical significance of these findings is manifested not only in increased mortality but also in a marked difference in secondary infections in older patients as long as a month following ICU admission.

Ceramic technologies for automotive industry: Current status and perspectives

International Nuclear Information System (INIS)

Okada, Akira

2009-01-01

The automotive industry has developed substantially through advances in mechanical technologies, and technologies such as electronics and advanced materials have also contributed to further advances in automobiles. The contribution of ceramic materials to automobile technologies ranges over driving performance, exhaust gas purification, and fuel efficiency improvements. Several ceramic components, such as knock sensors, oxygen sensors, exhaust gas catalysts, and silicon nitride parts for automotive engines, have been successfully applied to automobiles. This paper focuses on the contribution of ceramics to automotive technologies. It also mentions potential contributions in the future, including adiabatic turbo-compound diesels, ceramic gas turbines, fuel cells, and electric vehicles because ceramic technologies have been intensively involved in the challenge to achieve advanced power sources.

Tokamak fusion reactor exhaust

International Nuclear Information System (INIS)

Harrison, M.F.A.; Harbour, P.J.; Hotston, E.S.

1981-08-01

This report presents a compilation of papers dealing with reactor exhaust which were produced as part of the TIGER Tokamak Installation for Generating Electricity study at Culham. The papers are entitled: (1) Exhaust impurity control and refuelling. (2) Consideration of the physical problems of a self-consistent exhaust and divertor system for a long burn Tokamak. (3) Possible bundle divertors for INTOR and TIGER. (4) Consideration of various magnetic divertor configurations for INTOR and TIGER. (5) A appraisal of divertor experiments. (6) Hybrid divertors on INTOR. (7) Refuelling and the scrape-off layer of INTOR. (8) Simple modelling of the scrape-off layer. (9) Power flow in the scrape-off layer. (10) A model of particle transport within the scrape-off plasma and divertor. (11) Controlled recirculation of exhaust gas from the divertor into the scrape-off plasma. (U.K.)

Influence of preexisting pulmonary emphysema on susceptibility of rats to inhaled diesel exhaust

International Nuclear Information System (INIS)

Mauderly, J.L.; Bice, D.E.; Cheng, Y.S.; Gillett, N.A.; Griffith, W.C.; Henderson, R.F.; Pickrell, J.A.; Wolff, R.K.

1990-01-01

The susceptibilities of normal rats and rats with preexisting pulmonary emphysema to chronically inhaled diesel exhaust were compared. Rats were exposed 7 h/day, 5 days/wk for 24 months to diesel exhaust at 3.5 mg soot/m3, or to clean air as controls. Emphysema was induced in one-half of the rats by intratracheal instillation of elastase 6 wk before exhaust exposure. Measurements included lung burdens of diesel soot, respiratory function, bronchoalveolar lavage, clearance of radiolabeled particles, pulmonary immune responses, lung collagen, excised lung weight and volume, histopathology, and mean linear intercept of terminal air spaces. Parameters indicated by analysis of variance to exhibit significant interactions between the influences of emphysema and exhaust were examined to determine if the effects were more than additive (indicating increased susceptibility). Although 14 of 63 parameters demonstrated emphysema-exhaust interactions, none indicated increased susceptibility. Less soot accumulated in lungs of emphysematous rats than in those of nonemphysematous rats, and the reduced accumulation had a sparing effect in the emphysematous rats. The results did not support the hypothesis that emphysematous lungs are more susceptible than are normal lungs to chronic exposure to high levels of diesel exhaust. The superimposition of effects of emphysema and exhaust, however, might still warrant special concern for heavy exposures of emphysematous subjects

Demonstration of high temperature thermoelectric waste heat recovery from exhaust gases of a combustion engine

Energy Technology Data Exchange (ETDEWEB)

Trottmann, Matthias; Weidenkaff, Anke; Populoh, Sascha; Brunko, Oliver; Veziridis, Angelika; Bach, Christian; Cabalzar, Urs [Empa, Duebendorf (Switzerland)

2011-07-01

The energy efficiency of passenger cars becomes increasingly important due to a growing awareness in terms of climate change and shortages of resources associated with rising fuel prices. In addition to the efforts towards the optimization of the engine's internal efficiency, waste heat recovery is the main objective. In this respect, thermoelectric (TE) devices seem to be suited as heat recuperation systems. Thermoelectric generators allow for direct transformation of thermal into electrical energy. In order to thoroughly investigate this type of recovery system a TE demonstrator was mounted on the muffler of a VW Touran and tested. The waste heat of the exhaust gas was converted into electricity with a conversion rate of {proportional_to}. 3.5%. The limiting factor was the low thermal stability of the commercial modules used in this pre-study to elaborate reference values. Thermoelectric modules based on sustainable and temperature-stable materials are being developed to improve the measured values. A thermoelectric test generator with perovskite-type oxide modules was constructed confirm the function and stability at elevated temperatures. Despite all the advantages of this material class, the TE performance is still to be improved. A quantitative measure of a material's TE performance is the temperature-independent Figure of Merit ZT. ZT increases with decreasing thermal and increasing electrical conductivity. An approach to thermal conductivity reduction is nanostructuring of the material. The Ultrasonic Spray Combustion (USC) technique allows to produce powders with a grain size on the nanoscale and was tested in this study. (orig.)

Exploitation of the residue of foundry exhauster powder in ceramics for covering

International Nuclear Information System (INIS)

Valentina, Luiz Veriano Oliveira Dalla; Folgueras, Marilena Valadares; Knop, Wanessa Rejane; Semptikovski, Simone Claudiano

2010-01-01

The work evaluates the possibility of the use the exhauster powder generated in the foundry process in ceramic mass atomized semigre type. This residue was characterized by scanning electron microscopy, x-ray diffractometry and thermal analysis (DSC, TG). Formulations were prepared with different exhauster powder content. The sintered materials between 1000°C at 1 200 deg C. The results showed of the scanning electron microscopy and the characterization of the technological properties (water absorption, linear shrinkage and apparent density) had demonstrated the viability of the use of this residue. Through experiments it was observed that the exhauster powder promoted an increment in the sintering degree, and raised texts of this they increase of the porosity and intensification in the color of the new material. That is, it is possible to incorporate small amounts of the exhauster powder in substitution the substances cousins of natural origin. (author)

Measurement of Gamma Radiation in an Automobile Mechanic ...

African Journals Online (AJOL)

Environmental radiation measurement was carried out in an automobile mechanic village, Apo, Abuja, Nigeria. An in-situ measurement approach was adopted using RDS-200 Universal Survey Meter and a handheld Global Positioning System (Garmin GPS 76S) equipment. It was observed that the dose equivalent varied ...

Reduced Haematopoietic Output in Automobile Mechanics and Sprayers with Chronic Exposure to Petrochemicals: A Case-Control Study in Cape Coast, Ghana.

Science.gov (United States)

Adu, Patrick; Pobee, Richard; Awuah, Aaron; Asiamah, Paul B; Amoani, Festus; Gyabaa, Sampson

2018-01-01

Automobile mechanics and sprayers are at a higher risk of exposure to hazardous chemicals such as polycyclic aromatic hydrocarbons and heavy metals which may cause adverse health outcomes. This study aimed to use reticulocyte count as an indirect measure of the haematological output in automobile mechanics and sprayers in the Cape Coast Metropolis, Ghana. This cross-sectional study recruited 130 participants: 90 cases (57 automobile mechanics and 33 automobile sprayers) and 40 controls (nonautomobile workers). Venous blood samples were drawn from the participants and examined for full blood count and absolute reticulocyte count. Semi-structured questionnaire was used to collect demographic and occupational safety information from participants. 75.6% of cases had never received occupational safety training. Whereas 35.1% of automobile mechanics routinely siphoned fuel, 36.4% of automobile sprayers never used nose masks in the discharge of their duties. Controls had significantly higher WBC counts compared to mechanics ( p = 0.0001; 5.04 ± 1.7 versus 3.81 ± 1.1), or sprayers ( p = 0.0004; 5.04 ± 1.7 versus 3.74 ± 0.9). Lymphocyte, monocyte, and platelet counts were also significantly higher in controls compared to cases. Whereas RBC counts were significantly higher in controls compared to automobile mechanics (4.85 versus 4.66; p = 0.034), haemoglobin levels were significantly higher in automobile sprayers compared to controls (15.13 versus 14.1 g/dl; p = 0.0126). Absolute reticulocyte count was significantly higher in controls compared to cases [ p mechanics)]. Among the cases however, only RBC counts were significantly lower in automobile mechanics compared to automobile sprayers ( p = 0.0088; 4.66 ± 0.4 versus 4.85 ± 0.5). It was evident that both automobile mechanics and sprayers had significantly reduced haematopoietic output. Occupational safety training is not given priority and must be addressed.

The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

Energy Technology Data Exchange (ETDEWEB)

Appert, O; Pinchon, Ph

2004-07-01

In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

Quantifying the association between obesity, automobile travel, and caloric intake.

Science.gov (United States)

Behzad, Banafsheh; King, Douglas M; Jacobson, Sheldon H

2013-02-01

The objective of this study is to assess the association between average adult body mass index (BMI), automobile travel, and caloric intake in the US in order to predict future trends of adult obesity. Annual BMI data (1984-2010) from the Behavioral Risk Factor Surveillance System (BRFSS), vehicle miles traveled data (1970-2009) from the Federal Highway Administration, licensed drivers data (1970-2009) from the Federal Highway Administration, and adult average daily caloric intake data (1970-2009) from the US Department of Agriculture were collected. A statistical model is proposed to capture multicollinearity across the independent variables. The proposed statistical model provides an estimate of changes in the average adult BMI associated with changes in automobile travel and caloric intake. According to this model, reducing daily automobile travel by one mile per driver would be associated with a 0.21 kg/m(2) reduction in the national average BMI after six years. Reducing daily caloric intake by 100 calories per person would be associated with a 0.16 kg/m(2) reduction in the national average BMI after three years. Making small changes in travel or diet choices may lead to comparable obesity interventions, implying that travel-based interventions may be as effective as dietary interventions. Copyright © 2012 Elsevier Inc. All rights reserved.

Impact Analysis of Transportation Modal Shift on Regional Energy Consumption and Environmental Level: Focused on Electric Automobiles

OpenAIRE

Hong Bae Kim; Chang Ho Hur

2016-01-01

Many governments have tried to reduce CO2 emissions which are believed to be the main cause for global warming. The deployment of electric automobiles is regarded as an effective way to reduce CO2 emissions. The Korean government has planned to deploy about 200,000 electric automobiles. The policy for the deployment of electric automobiles aims at not only decreasing gasoline consumption but also increasing electricity production. However, if an electricity consuming regions is not consistent...

Study of Correlation Between Heavy Metal Concentration, Street ...

African Journals Online (AJOL)

number of negative effects, exhaust from all combustion engines combine to ... particularly close to the fumes of automobile exhaust. ..... pipes, dental alloys, fungicides, industrial emission, ... pressure and effects on the myocardium in animals,.

Applicability of Talent Management with Special Reference to Automobile Industry of Krishnagiri District

OpenAIRE

R. Santoshkumar; Dr. N. Rajasekar

2011-01-01

This research paper examines the applicability of Talent Management in Automobile Industry in Krishnagiri district. The primary data collected from the 100 different levels of employees in automobile industry. Hypothesis test used to measure the applicability of talent management. This paper found the executives feel that Talent Management is the competitive Advantage for the company; they believe that their company’s recruitment policy is leveraged towards recruiting top talent. This study...

Grout disposal facility vault exhauster: Technical background document on demonstration of best available control technology for toxics

International Nuclear Information System (INIS)

Glissmeyer, J.A.; Glantz, C.S.; Rittman, P.D.

1994-09-01

The Grout Disposal Facility (GDF) is currently operated on the US Department of Energy's Hanford Site. The GDF is located near the east end of the Hanford Site's 200 East operations area, and is used for the treatment and disposal of low-level radioactive liquid wastes. In the grout treatment process, selected radioactive wastes from double-shell tanks are mixed with grout-forming solids; the resulting grout slurry is pumped to near-surface concrete vaults for solidification and permanent disposal. As part of this treatment process, small amounts of toxic particles and volatile organic compounds (VOCs) may be released to the atmosphere through the GDF's exhaust system. This analysis constitutes a Best Available Control Technology for Toxics (T-BACT) study, as required in the Washington Administrative Code (WAC 173-460) to support a Notice of Construction for the operation of the GDF exhaust system at a modified flow rate that exceeds the previously permitted value. This report accomplishes the following: assesses the potential emissions from the GDF; estimates air quality impacts to the public from toxic air pollutants; identifies control technologies that could reduce GDF emissions; evaluates impacts of the control technologies; and recommends appropriate emissions controls

Influence of driving cycles on exhaust emissions and fuel consumption of gasoline passenger car in Bangkok.

Science.gov (United States)

Nutramon, Tamsanya; Supachart, Chungpaibulpatana

2009-01-01

The influence of different driving cycles on their exhaust emissions and fuel consumption rate of gasoline passenger car was investigated in Bangkok based on the actual measurements obtained from a test vehicle driving on a standard chassis dynamometer. A newly established Bangkok driving cycle (BDC) and the European driving cycle (EDC) which is presently adopted as the legislative cycle for testing automobiles registered in Thailand were used. The newly developed BDC is constructed using the driving characteristic data obtained from the real on-road driving tests along selected traffic routes. A method for selecting appropriate road routes for real driving tests is also introduced. Variations of keyed driving parameters of BDC with different driving cycles were discussed. The results showed that the HC and CO emission factors of BDC are almost two and four times greater than those of EDC, respectively. Although the difference in the NOx emission factor is small, the value from BDC is still greater than that of EDC by 10%. Under BDC, the test vehicle consumes fuel about 25% more than it does under EDC. All these differences are mainly attributed to the greater proportion of idle periods and higher fluctuations of vehicle speed in the BDC cycle. This result indicated that the exhausted emissions and fuel consumption of vehicles obtained from tests under the legislative modal-type driving cycle (EDC) are significantly different from those actually produced under real traffic conditions especially during peak periods.

Impaired vascular function after exposure to diesel exhaust generated at urban transient running conditions

Directory of Open Access Journals (Sweden)

Westerholm Roger

2010-07-01

Full Text Available Abstract Background Traffic emissions including diesel engine exhaust are associated with increased respiratory and cardiovascular morbidity and mortality. Controlled human exposure studies have demonstrated impaired vascular function after inhalation of exhaust generated by a diesel engine under idling conditions. Objectives To assess the vascular and fibrinolytic effects of exposure to diesel exhaust generated during urban-cycle running conditions that mimic ambient 'real-world' exposures. Methods In a randomised double-blind crossover study, eighteen healthy male volunteers were exposed to diesel exhaust (approximately 250 μg/m3 or filtered air for one hour during intermittent exercise. Diesel exhaust was generated during the urban part of the standardized European Transient Cycle. Six hours post-exposure, vascular vasomotor and fibrinolytic function was assessed during venous occlusion plethysmography with intra-arterial agonist infusions. Measurements and Main Results Forearm blood flow increased in a dose-dependent manner with both endothelial-dependent (acetylcholine and bradykinin and endothelial-independent (sodium nitroprusside and verapamil vasodilators. Diesel exhaust exposure attenuated the vasodilatation to acetylcholine (P Conclusion Exposure to diesel exhaust generated under transient running conditions, as a relevant model of urban air pollution, impairs vasomotor function and endogenous fibrinolysis in a similar way as exposure to diesel exhaust generated at idling. This indicates that adverse vascular effects of diesel exhaust inhalation occur over different running conditions with varying exhaust composition and concentrations as well as physicochemical particle properties. Importantly, exposure to diesel exhaust under ETC conditions was also associated with a novel finding of impaired of calcium channel-dependent vasomotor function. This implies that certain cardiovascular endpoints seem to be related to general diesel

Trends in chassis and automobile electronics components

Energy Technology Data Exchange (ETDEWEB)

Hackenberg, Ulrich [Volkswagen AG, Wolfsburg (Germany)

2008-07-01

The rapidly-growing importance of electronics in automobile construction is in part determined by the debate on sustainability and the clear trend towards electric power trains. Another factor, however, is the decisive impact of electronics on the further development of components, e.g. for chassis. Apart from environmental protection, key motivators for component development include comfort, safety, infotainment and driver assistance. (orig.)

[Reduction of automobile traffic: urgent health promotion policy].

Science.gov (United States)

Tapia Granados, J A

1998-03-01

During the last few decades, traffic injuries have become one of the leading causes of death and disability in the world. In urban areas, traffic congestion, noise, and emissions from motor vehicles produce subjective disturbances and detectable pathological effects. More than one billion people are exposed to harmful levels of environmental pollution. Because its combustion engine generates carbon dioxide (CO2), the automobile is one of the chief sources of the gases that are causing the greenhouse effect. The latter has already caused a rise in the average ambient temperature, and over the next decades it will predictable cause significant climatic changes whose consequences, though uncertain, are likely to be harmful and possibly catastrophic. Aside from the greenhouse effect, the relentless growth of parking zones, traffic, and the roadway infrastructure in urban and rural areas is currently one of the leading causes of environmental degradation. Urban development, which is nearly always "planned" around traffic instead of people, leads to a significant deterioration in the quality of life, while it also destroys the social fabric. Unlike the private automobile, public transportation, bicycles, and walking help reduce pollution, congestion, and traffic volume, as well as the morbidity and mortality resulting from injuries and ailments related to pollution. Non-automobile transportation also encourages physical activity--with its positive effect on general health--and helps reduce the greenhouse effect. The drop in traffic volume and the increased use of alternate means of transportation are thus an integrated health promotion policy which should become an inherent part of the movement for the promotion of healthy cities and of transportation policies and economic policy in general.

Construction and evaluation of a self rating scale for stress-induced exhaustion disorder, the Karolinska Exhaustion Disorder Scale.

Science.gov (United States)

Besèr, Aniella; Sorjonen, Kimmo; Wahlberg, Kristina; Peterson, Ulla; Nygren, Ake; Asberg, Marie

2014-02-01

Prolonged stress (≥ six months) may cause a condition which has been named exhaustion disorder (ED) with ICD-10 code F43.8. ED is characterised by exhaustion, cognitive problems, poor sleep and reduced tolerance to further stress. ED can cause long term disability and depressive symptoms may develop. The aim was to construct and evaluate a self-rating scale, the Karolinska Exhaustion Disorder Scale (KEDS), for the assessment of ED symptoms. A second aim was to examine the relationship between self-rated symptoms of ED, depression, and anxiety using KEDS and the Hospital Anxiety and Depression Scale (HAD). Items were selected based on their correspondence to criteria for ED as formulated by the Swedish National Board of Health and Welfare (NBHW), with seven response alternatives in a Likert-format. Self-ratings performed by 317 clinically assessed participants were used to analyse the scale's psychometric properties. KEDS consists of nine items with a scale range of 0-54. Receiver operating characteristics analysis demonstrated that a cut-off score of 19 was accompanied by high sensitivity and specificity (each above 95%) in the discrimination between healthy subjects and patients with ED. Reliability was satisfactory and confirmatory factor analysis revealed that ED, depression and anxiety are best regarded as different phenomena. KEDS may be a useful tool in the assessment of symptoms of Exhaustion Disorder in clinical as well as research settings. There is evidence that the symptom clusters of ED, anxiety and depression, respectively, reflect three different underlying dimensions. © 2013 The Authors. Scandinavian Journal of Psychology published by Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Preparation and Characteristics of Ultrasonic Transducers for High Temperature Using PbNb2O6

Science.gov (United States)

Soejima, Junichiro; Sato, Kokichi; Nagata, Kunihiro

2000-05-01

The substance PZT(Pb(Zr, Ti)O3) is chiefly used for piezoceramic transducers in many ultrasonic flow meters. It is difficult to use PZT transducers for flow meters for automobile exhaust gas at high temperatures over 350°C. Lead niobate (PbNb2O6) has a high Curie temperature of 540°C and a low mechanical quality factor, and is the most suitable as the sensor element in flow meters for automobile exhaust gas. However, it is difficult to fabricate dense PbNb2O6 ceramics that have good piezoelectric properties. In this study, ceramics with high density and a high piezoelectric effect were fabricated by adding various elements such as Mn and Ca to PbNb2O6 and by examining the sintering process. A Langevin transducer with a resonance frequency of 80 kHz was made for measuring automobile exhaust gas flow using PbNb2O6 ceramics.

29 CFR 785.40 - When private automobile is used in travel away from home community.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false When private automobile is used in travel away from home community. 785.40 Section 785.40 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... WORKED Application of Principles Traveltime § 785.40 When private automobile is used in travel away from...

Automobile industry and new bio-fuel oils: International panorama

International Nuclear Information System (INIS)

Hampel, G.

1992-01-01

In assessing the technical/economic feasibility of the direct combustion of vegetable oils in diesel type engines, this paper first points out the good results obtained in performance tests on these fuels in Elsberg engines, and their low sulfur and nitrogen oxides and carbon dioxide emission characteristics. It then assesses the improvements that are necessary in the development of marketable bio-fuel oils that conform to European Communities air pollution standards for automobiles. Further efforts must be made to reduce bio-fuel oil smoke emission levels, to compensate for their lower calorific value as compared with conventional diesel fuels, and to make them compatible with automobile finishing materials - paints and plastics. The paper suggests a set of suitable fiscal policies designed to favour the marketing of bio-diesel fuels based on their favourable pollution abating qualities - low greenhouse gas emissions and biodegradability

Carbon Monoxide (CO)

Science.gov (United States)

... automobile exhaust from attached garages tobacco smoke auto, truck, or bus exhaust from attached garages, nearby roads, ... Portable generators are useful when temporary or remote electric power is needed, but they also can be ...

Exhaust purification with on-board ammonia production

Science.gov (United States)

Robel, Wade J [Peoria, IL; Driscoll, James Joshua [Dunlap, IL; Coleman, Gerald N [Peterborough, GB

2008-05-13

A system of ammonia production for a selective catalytic reduction system is provided. The system includes producing an exhaust gas stream within a cylinder group, wherein the first exhaust gas stream includes NOx. The exhaust gas stream may be supplied to an exhaust passage and cooled to a predetermined temperature range, and at least a portion of the NOx within the exhaust gas stream may be converted into ammonia.

Vertical Keiretsu and International Market Entry: The Case of the Japanese Automobile Ancillary Industry

OpenAIRE

Kunal Banerji; Rakesh B Sambharya

1996-01-01

This study investigated whether small Japanese automobile ancillary firms followed the major Japanese automakers in setting up production facilities in the United States. Based on Dunning's eclectic theory of foreign direct investment and resource dependence theory, hypotheses were generated to explain the determinants of foreign investment of Japanese suppliers. It was hypothesized that mutual dependencies between the major Japanese automobile firms and their suppliers, firm-specific ownersh...

Emissions and prevention/control techniques for automobile body shops in Ciudad Juarez, Mexico

Energy Technology Data Exchange (ETDEWEB)

Jeffery, J.D.; Sager, M.

1999-08-01

Emissions of Volatile Organic Compounds (VOC) from automobile body repair shops are believed to be significant and to contribute to ozone nonattainment in El Paso, Texas and to violations of ozone air quality standards in Ciudad Juarez, Mexico. The Direccion de Desarrollo Urbano Y Ecologia (DDUE), (the local agency in Ciudad Juarez, Mexico) requested CICA's assistance in determining emissions from and identifying appropriate pollution prevention and control techniques for automobile body repair shops in Ciudad Juarez.

Ganoderma tsugae Hepatoprotection against Exhaustive Exercise-Induced Liver Injury in Rats

Directory of Open Access Journals (Sweden)

Wan-Teng Lin

2013-01-01

Full Text Available Several studies have been shown that accelerated apoptosis is involved in post-exercise lymphocytopenia and tissue damage after high-intensity exercise. Ganoderma tsugae (GT is one of the well-known medicinal mushrooms that possess various pharmacological functions. This mushroom has traditionally been used for health promotion purposes. This study investigates the hepatoprotective effects of GT on exhaustive exercise-induced liver damage. Twenty-four male Sprague-Dawley rats were randomly divided into four groups and designated as exhaustive exercise only (E, exhaustive exercise with low dosage (EL, medium dosage (EM and high dosage (EH GT at 0, 0.1875, 0.9375 and 1.875 g/kg/day, respectively. After 30 days all rats were euthanized immediately after an exhaustive running challenge on a motorized treadmill. The rat livers were immediately harvested. Evidence of apoptotic liver cell death was revealed using terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL assay and caspases mediated cascade events. DNA fragmentation, an apoptosis process, can be examined using TUNEL assay. A few TUNEL-positive hepatocytes, compared to the exercise only group, were observed in the livers from exhaustive animals supplemented with GT. Immunoblot analysis also showed that caspase-6-mediated specific cleavage of lamin A/C was increased significantly in the livers of group E, but was significantly decreased in the EM and EH groups. Our observations demonstrate that GT possesses anti-apoptotic and hepatoprotective potential after exhaustive exercise.

Ganoderma tsugae hepatoprotection against exhaustive exercise-induced liver injury in rats.

Science.gov (United States)

Huang, Chi-Chang; Huang, Wen-Ching; Yang, Suh-Ching; Chan, Chih-Chi; Lin, Wan-Teng

2013-01-29

Several studies have been shown that accelerated apoptosis is involved in post-exercise lymphocytopenia and tissue damage after high-intensity exercise. Ganoderma tsugae (GT) is one of the well-known medicinal mushrooms that possess various pharmacological functions. This mushroom has traditionally been used for health promotion purposes. This study investigates the hepatoprotective effects of GT on exhaustive exercise-induced liver damage. Twenty-four male Sprague-Dawley rats were randomly divided into four groups and designated as exhaustive exercise only (E), exhaustive exercise with low dosage (EL), medium dosage (EM) and high dosage (EH) GT at 0, 0.1875, 0.9375 and 1.875 g/kg/day, respectively. After 30 days all rats were euthanized immediately after an exhaustive running challenge on a motorized treadmill. The rat livers were immediately harvested. Evidence of apoptotic liver cell death was revealed using terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay and caspases mediated cascade events. DNA fragmentation, an apoptosis process, can be examined using TUNEL assay. A few TUNEL-positive hepatocytes, compared to the exercise only group, were observed in the livers from exhaustive animals supplemented with GT. Immunoblot analysis also showed that caspase-6-mediated specific cleavage of lamin A/C was increased significantly in the livers of group E, but was significantly decreased in the EM and EH groups. Our observations demonstrate that GT possesses anti-apoptotic and hepatoprotective potential after exhaustive exercise.

Automobile Driver Fingerprinting

Directory of Open Access Journals (Sweden)

Enev Miro

2016-01-01

Full Text Available Today’s automobiles leverage powerful sensors and embedded computers to optimize efficiency, safety, and driver engagement. However the complexity of possible inferences using in-car sensor data is not well understood. While we do not know of attempts by automotive manufacturers or makers of after-market components (like insurance dongles to violate privacy, a key question we ask is: could they (or their collection and later accidental leaks of data violate a driver’s privacy? In the present study, we experimentally investigate the potential to identify individuals using sensor data snippets of their natural driving behavior. More specifically we record the in-vehicle sensor data on the controllerarea- network (CAN of a typical modern vehicle (popular 2009 sedan as each of 15 participants (a performed a series of maneuvers in an isolated parking lot, and (b drove the vehicle in traffic along a defined ~ 50 mile loop through the Seattle metropolitan area. We then split the data into training and testing sets, train an ensemble of classifiers, and evaluate identification accuracy of test data queries by looking at the highest voted candidate when considering all possible one-vs-one comparisons. Our results indicate that, at least among small sets, drivers are indeed distinguishable using only incar sensors. In particular, we find that it is possible to differentiate our 15 drivers with 100% accuracy when training with all of the available sensors using 90% of driving data from each person. Furthermore, it is possible to reach high identification rates using less than 8 minutes of training data. When more training data is available it is possible to reach very high identification using only a single sensor (e.g., the brake pedal. As an extension, we also demonstrate the feasibility of performing driver identification across multiple days of data collection

Vacuum exhaust duct used for thermonuclear device

International Nuclear Information System (INIS)

Tachikawa, Nobuo; Kondo, Mitsuaki; Honda, Tsutomu.

1990-01-01

The present invention concerns a vacuum exhaust duct used for a thermonuclear device. A cylindrical metal liners is lined with a gap to the inside of a vacuum exhaust duct main body. Bellows are connected to both ends of the metal liners and the end of the bellows is welded to the vacuum exhaust duct main body. Futher, a heater is mounted to the metal liner on the side of the vacuum exhaust duct main body, and the metal liner is heated by the heater to conduct baking for the vacuum exhaust duct main body. Accordingly, since there is no requirement for elevating the temperature of the vacuum exhaust duct upon conducting baking, the vacuum exhaust duct scarcely suffers substantial deformation due to heat expansion. Further, there is also no substantial deformation for the bellows disposed between the outer circumference of the vacuum vessel and a portion of a vacuum exhaust duct, so that the durability of the bellows is greatly improved. (I.S.)

Duplex tab exhaust nozzle

Science.gov (United States)

Gutmark, Ephraim Jeff (Inventor); Martens, Steven (nmn) (Inventor)

2012-01-01

An exhaust nozzle includes a conical duct terminating in an annular outlet. A row of vortex generating duplex tabs are mounted in the outlet. The tabs have compound radial and circumferential aft inclination inside the outlet for generating streamwise vortices for attenuating exhaust noise while reducing performance loss.

The Development of Green Clusters of the Automobile Industry in the Russian Region

Directory of Open Access Journals (Sweden)

Alexander A. Khokhlov

2017-06-01

Full Text Available The article shows the expediency of forming of a green cluster of the automobile industry and indicates the possibility of implementation through the development of electric vehicles as one of the environmentally friendly modes of transport. It is proved that their production requires the joint efforts of the automobile industry, small and medium business enterprises and organizations in other industries that manufacture components and equipment for electric cars. Further the possibility and expediency of launching of environmentally friendly vehicles is proved through the provision of issue in the process of import substitution in the automotive industry. The assumed centres of the green clusters of the automobile industry are selected, they are companies that are potential manufacturers of automobiles, having the properties of environmentally friendly vehicles: PJSC "AVTOVAZ", "GAZ". The scheme of realization of perspective projects on creation of models and production of electric vehicles is represented in the framework of activation of cooperation between state, municipal and business structures in the Russian regions. It is proposed as an institutional form of their interaction to use the concept of a consortium of the automotive industry, which principles are reflected in the text. It is concluded that in the automotive industry in the Russian regions there are possibilities of formation of territorial and production clusters based on the foundations of a green economy in the Russian Federation.

Emergency distress call system for automobiles in Lagos state, Nigeria

African Journals Online (AJOL)

Emergency distress call system for automobiles in Lagos state, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... and communications technology capabilities to transportation and the medical care system in order to save lives, ...

Exhaust purification with on-board ammonia production

Science.gov (United States)

Robel, Wade J.; Driscoll, James J.; Coleman, Gerald N.; Knox, Kevin J.

2009-06-30

A power source is provided for use with selective catalytic reduction systems for exhaust-gas purification. The power source includes a first cylinder group with a first air-intake passage and a first exhaust passage, and a second cylinder group with a second air-intake passage and a second exhaust passage. The second air-intake passage is fluidly isolated from the first air-intake passage. A fuel-supply device may be configured to supply fuel into the first exhaust passage, and a catalyst may be disposed downstream of the fuel-supply device to convert at least a portion of the exhaust stream in the first exhaust passage into ammonia.

Hybrid modeling and empirical analysis of automobile supply chain network

Science.gov (United States)

Sun, Jun-yan; Tang, Jian-ming; Fu, Wei-ping; Wu, Bing-ying

2017-05-01

Based on the connection mechanism of nodes which automatically select upstream and downstream agents, a simulation model for dynamic evolutionary process of consumer-driven automobile supply chain is established by integrating ABM and discrete modeling in the GIS-based map. Firstly, the rationality is proved by analyzing the consistency of sales and changes in various agent parameters between the simulation model and a real automobile supply chain. Second, through complex network theory, hierarchical structures of the model and relationships of networks at different levels are analyzed to calculate various characteristic parameters such as mean distance, mean clustering coefficients, and degree distributions. By doing so, it verifies that the model is a typical scale-free network and small-world network. Finally, the motion law of this model is analyzed from the perspective of complex self-adaptive systems. The chaotic state of the simulation system is verified, which suggests that this system has typical nonlinear characteristics. This model not only macroscopically illustrates the dynamic evolution of complex networks of automobile supply chain but also microcosmically reflects the business process of each agent. Moreover, the model construction and simulation of the system by means of combining CAS theory and complex networks supplies a novel method for supply chain analysis, as well as theory bases and experience for supply chain analysis of auto companies.

Rare earth metals for automotive exhaust catalysts

International Nuclear Information System (INIS)

Shinjoh, Hirohumi

2006-01-01

The usage of rare earth metals for automotive exhaust catalysts is demonstrated in this paper. Rare earth metals have been widely used in automotive catalysts. In particular, three-way catalysts require the use of ceria compounds as oxygen storage materials, and lanthana as both a stabilizer of alumina and a promoter. The application for diesel catalysts is also illustrated. Effects of inclusion of rare earth metals in automotive catalysts are discussed

40 CFR 1065.130 - Engine exhaust.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Engine exhaust. 1065.130 Section 1065... ENGINE-TESTING PROCEDURES Equipment Specifications § 1065.130 Engine exhaust. (a) General. Use the exhaust system installed with the engine or one that represents a typical in-use configuration. This...

Device for purifying exhaust gas

International Nuclear Information System (INIS)

Makita, Kiyoshi.

1973-01-01

Purpose: To ensure the reliability in collection of krypton even on accident in liquidizing distillation tower. Constitution: Exhaust gas flows through active carbon adsorption tower where short half-life rare gas in exhaust gas is separated by adsorption, then through heat exchanger, then continuous distillation tower where krypton 85 is separated, then through batch distillation tower where krypton 85 is condensed, and then flows into storing cylinder. On accident in liquidizing distillation tower, at the first period exhaust gas flows through series connected active carbon adsorption tower, krypton 85 adsorbed in adsorption tower being transferred to cooling type adsorption tower, at the next period exhaust gas flows through tower, krypton 85 adsorbed in adsorption tower being transferred to tower. (M. K.)

Exhaust gas recirculation system for an internal combustion engine

Science.gov (United States)

Wu, Ko-Jen

2013-05-21

An exhaust gas recirculation system for an internal combustion engine comprises an exhaust driven turbocharger having a low pressure turbine outlet in fluid communication with an exhaust gas conduit. The turbocharger also includes a low pressure compressor intake and a high pressure compressor outlet in communication with an intake air conduit. An exhaust gas recirculation conduit fluidly communicates with the exhaust gas conduit to divert a portion of exhaust gas to a low pressure exhaust gas recirculation branch extending between the exhaust gas recirculation conduit and an engine intake system for delivery of exhaust gas thereto. A high pressure exhaust gas recirculation branch extends between the exhaust gas recirculation conduit and the compressor intake and delivers exhaust gas to the compressor for mixing with a compressed intake charge for delivery to the intake system.

Esophageal rupture caused by explosion of an automobile tire tube: a case report.

Science.gov (United States)

Yu, Yongkang; Ding, Sheng; Zheng, Yifeng; Li, Wei; Yang, Lie; Zheng, Xiushan; Liu, Xiaoyan; Jiang, Jianqing

2013-08-23

There have been no reports in the literature of esophageal rupture in adults resulting from an explosion of an automobile tire. We report the first case of just such an occurrence after an individual bit into a tire, causing it to explode in his mouth. A 47-year-old Han Chinese man presented with massive hemorrhage in his left eye after he accidentally bit an automobile tire tube which burst into his mouth. He was diagnosed with esophageal rupture based on a chest computed tomography scan and barium swallow examination. Drainage of empyema (right chest), removal of thoracic esophagus, exposure of cervical esophagus, cardiac ligation and gastrostomy were performed respectively. After that, esophagogastrostomy was performed. Successful anastomosis was obtained at the neck with no postoperative complications 3 months after the surgery. The patient was discharged with satisfactory outcomes. We present this case report to bring attention to esophageal rupture in adults during the explosion of an automobile tire tube in the mouth.

Study on Micro Wind Generator System for Automobile

Science.gov (United States)

Fujimoto, Koji; Washizu, Shinsuke; Ichikawa, Tomohiko; Yukita, Kazuto; Goto, Yasuyuki; Ichiyanagi, Katsuhiro; Oshima, Takamitsu; Hayashi, Niichi; Tobi, Nobuo

This paper proposes the micro wind generator system for automobile. This proposes system is composed of the deflector, the micro windmill, the generator, and electric storage device. Then, the effectiveness is confirmed from an examination using air blower. Therefore, new energy can be expected to be obtained by installing this system in the truck.

Assessment of soil-pollution by slag from an automobile battery ...

African Journals Online (AJOL)

Administrator

automobile battery manufacturing plant in Nigeria. Gilbert U. Adie1* and .... Contamination of the environment with heavy metals .... assessment of heavy metal contamination using ..... contact with the soil or through food chain with water,.

Evaluation of purchase intention of customers in two wheeler automobile segment: AHP and TOPSIS

Science.gov (United States)

Sri Yogi, Kottala

2018-03-01

Winning heart of customers is preeminent main design of any business organization in global business environment. This paper explored customer’s priorities while purchasing a two wheeler automobile segment using Analytical Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) as a multi criteria decision making tools to accomplish the research objectives. Study has been done to analyze different criteria to be considered during purchasing of two wheeler automobiles among respondents using structured questionnaire based on SAATY scale. Based on our previous work on empirical & fuzzy logic approach to product quality and purchase intention of customers in two wheeler- operational, performance, economic, brand value and maintenance aspects are considered as decision criteria of customers while purchasing a two wheeler. The study suggests high pick up during overtaking, petrol saving, reasonable spare parts price, unique in design and identity and easy to change gear as main criterion in purchasing process. We also found some leading two wheeler automobiles models available in Indian market using some objective function criterion in choosing some important characteristics like price, cylinder capacity, brake horse power and weight during purchasing process of two wheeler automobile in Indian market based on respondents perception.

Polycyclic aromatic hydrocarbons and nitropolycyclic aromatic hydrocarbons in particulates emitted by motorcycles

International Nuclear Information System (INIS)

Pham, Chau Thuy; Kameda, Takayuki; Toriba, Akira; Hayakawa, Kazuichi

2013-01-01

We determined eleven PAHs and four NPAHs in particulates and regulated pollutants (CO, CO 2 , HC, NO x , PM) exhausted from motorcycles to figure out the characteristics of motorcycle exhausts. Fluoranthene and pyrene accounted for more than 50% of the total detected PAHs. Among four detected NPAHs, 6-nitrochrysene and 7-nitrobenz[a]anthracene were the predominant NPAHs and were highly correlated relationship with their parent PAHs (R = 0.93 and 0.97, respectively). The PM and HC emissions tended to be close to the PAH emissions. NO x and NPAHs were negatively correlated. Despite their small engine size, motorcycles emitted much more PM and PAHs, showed stronger PAH-related carcinogenicity and indirect-acting mutagenicity, but weaker NPAH-related direct-acting mutagenic potency than automobiles. This is the first study to analyze both PAHs and NPAHs emitted by motorcycles, which could provide useful information to design the emission regulations and standards for motorcycles such as PM. -- Highlights: ► We characterized PAHs and NPAHs distribution in motorcycle exhausts. ► NPAHs concentrations were about three orders of magnitude lower than those of PAHs. ► We found larger amounts of PM and PAHs in exhaust of motorcycles than of automobiles. ► Motorcycles showed stronger PAH-related toxicity than automobiles. ► Motorcycles showed weaker NPAH-related direct-acting mutagenicity than automobiles. -- Control polycyclic aromatic hydrocarbons and nitropolycyclic aromatic hydrocarbon in particulates emitted by motorcycles due to their toxic potency

46 CFR 119.425 - Engine exhaust cooling.

Science.gov (United States)

2010-10-01

..., all engine exhaust pipes must be water cooled. (1) Vertical dry exhaust pipes are permissible if installed in compliance with §§ 116.405(c) and 116.970 of this chapter. (2) Horizontal dry exhaust pipes are...) They are installed in compliance with §§ 116.405(c) and 116.970 of this chapter. (b) The exhaust pipe...

Air flow quality analysis of modenas engine exhaust system

Science.gov (United States)

Shahriman A., B.; Mohamad Syafiq A., K.; Hashim, M. S. M.; Razlan, Zuradzman M.; Khairunizam W. A., N.; Hazry, D.; Afendi, Mohd; Daud, R.; Rahman, M. D. Tasyrif Abdul; Cheng, E. M.; Zaaba, S. K.

2017-09-01

The simulation process being conducted to determine the air flow effect between the original exhaust system and modified exhaust system. The simulations are conducted to investigate the flow distribution of exhaust gases that will affect the performance of the engine. The back flow pressure in the original exhaust system is predicted toward this simulation. The design modification to the exhaust port, exhaust pipe, and exhaust muffler has been done during this simulation to reduce the back flow effect. The new designs are introduced by enlarging the diameter of the exhaust port, enlarge the diameter of the exhaust pipe and created new design for the exhaust muffler. Based on the result obtained, there the pulsating flow form at the original exhaust port that will increase the velocity and resulting the back pressure occur. The result for new design of exhaust port, the velocity is lower at the valve guide in the exhaust port. New design muffler shows that the streamline of the exhaust flow move smoothly compare to the original muffler. It is proved by using the modification exhaust system, the back pressure are reduced and the engine performance can be improve.

PIXE analysis of vehicle exhaust particulate

International Nuclear Information System (INIS)

Shi Xianfeng; Yao Huiying; Liu Bo; Sun Minde; Xu Huawei; Mi Yong; Shen Hao

2001-01-01

PIXE technique on the analysis of vehicle exhaust particulate is introduced. The clement composition and concentration of particulate are obtained. Some elements which are related to environmental pollution such as sulfur lead, silicon and manganese, were analyzed and discussed in detail by PIXE technique Nowadays although unleaded gasoline is widely used, the lead concentration is still very high in exhaust particulate. The concentrations of silicon and manganese in exhaust particulate from different model vehicles are also quite high from measurements. It shows that an evidence for exhaust pollution control could be provided from this work

Steady-state exhaust of helium ash in the W-shaped divertor of JT-60U

International Nuclear Information System (INIS)

Sakasai, A.; Takenaga, H.; Hosogane, N.

2001-01-01

By injecting a neutral beam of 60 keV helium (He) atoms as central fueling of helium into the ELMy H-mode plasmas, helium exhaust has been studied in the W-shaped pumped divertor on JT-60U. Efficient He exhaust was realized by He pumping using argon frosted cryopumps in the JT-60U new divertor. In steady state, good He exhaust capability (τ He */τ E =4 and high enrichment factor, where τ He * is a global particle confinement time of helium and τ E is the energy confinement time) was successfully demonstrated in attached ELMy H-mode plasmas. Good He exhaust capability was also obtained in detached ELMy H-mode plasmas, which was comparable to one in attached plasmas. This result of the helium exhaust is sufficient to support a detached divertor operation on ITER. After the divertor modification, helium exhaust in reversed shear plasmas has been investigated using He gas puff. Helium removal inside the internal transport barrier (ITB) is about two times as difficult as that outside the ITB in reversed shear discharges. (author)

Smog and Your Automobile. [Teacher's Manual, Filmstrip, Record].

Science.gov (United States)

California State Dept. of Public Health, Berkeley.

A filmstrip, 33 1/3 RPM record, and teacher's manual are combined in this set to be used in driver education classes at the senior high school level. Their main purpose is to inform future drivers how they can minimize pollution from their automobiles through proper car maintenance and good driving habits. Content of the manual is divided into…

Characterization of biological aerosol exposure risks from automobile air conditioning system.

Science.gov (United States)

Li, Jing; Li, Mingzhen; Shen, Fangxia; Zou, Zhuanglei; Yao, Maosheng; Wu, Chang-yu

2013-09-17

Although use of automobile air conditioning (AC) was shown to reduce in-vehicle particle levels, the characterization of its microbial aerosol exposure risks is lacking. Here, both AC and engine filter dust samples were collected from 30 automobiles in four different geographical locations in China. Biological contents (bacteria, fungi, and endotoxin) were studied using culturing, high-throughput gene sequence, and Limulus amebocyte lysate (LAL) methods. In-vehicle viable bioaerosol concentrations were directly monitored using an ultraviolet aerodynamic particle sizer (UVAPS) before and after use of AC for 5, 10, and 15 min. Regardless of locations, the vehicle AC filter dusts were found to be laden with high levels of bacteria (up to 26,150 CFU/mg), fungi (up to 1287 CFU/mg), and endotoxin (up to 5527 EU/mg). More than 400 unique bacterial species, including human opportunistic pathogens, were detected in the filter dusts. In addition, allergenic fungal species were also found abundant. Surprisingly, unexpected fluorescent peaks around 2.5 μm were observed during the first 5 min use of AC, which was attributed to the reaerosolization of those filter-borne microbial agents. The information obtained here can assist in minimizing or preventing the respiratory allergy or infection risk from the use of automobile AC system.

Bioaccumulation of Heavy Metals by Moringa Oleifera in Automobile ...

African Journals Online (AJOL)

Plants accumulate minerals essential for their growth from the environment alongside with heavy metals from contaminated areas.This study investigated bioaccumulation of heavy metals by Moringa oleifera in automobile workshops in three selected local government areas in Ibadan. This was done with a view to ...

Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery

International Nuclear Information System (INIS)

Sprouse, Charles; Depcik, Christopher

2013-01-01

Escalating fuel prices and future carbon dioxide emission limits are creating a renewed interest in methods to increase the thermal efficiency of engines beyond the limit of in-cylinder techniques. One promising mechanism that accomplishes both objectives is the conversion of engine waste heat to a more useful form of energy, either mechanical or electrical. This paper reviews the history of internal combustion engine exhaust waste heat recovery focusing on Organic Rankine Cycles since this thermodynamic cycle works well with the medium-grade energy of the exhaust. Selection of the cycle expander and working fluid are the primary focus of the review, since they are regarded as having the largest impact on system performance. Results demonstrate a potential fuel economy improvement around 10% with modern refrigerants and advancements in expander technology. -- Highlights: ► This review article focuses on engine exhaust waste heat recovery works. ► The organic Rankine cycle is superior for low to medium exergy heat sources. ► Working fluid and expander selection strongly influence efficiency. ► Several authors demonstrate viable systems for vehicle installation

Blimp-1–mediated CD4 T cell exhaustion causes CD8 T cell dysfunction during chronic toxoplasmosis

Science.gov (United States)

Cobb, Dustin A.; Bhadra, Rajarshi

2016-01-01

CD8, but not CD4, T cells are considered critical for control of chronic toxoplasmosis. Although CD8 exhaustion has been previously reported in Toxoplasma encephalitis (TE)–susceptible model, our current work demonstrates that CD4 not only become exhausted during chronic toxoplasmosis but this dysfunction is more pronounced than CD8 T cells. Exhausted CD4 population expressed elevated levels of multiple inhibitory receptors concomitant with the reduced functionality and up-regulation of Blimp-1, a transcription factor. Our data demonstrates for the first time that Blimp-1 is a critical regulator for CD4 T cell exhaustion especially in the CD4 central memory cell subset. Using a tamoxifen-dependent conditional Blimp-1 knockout mixed bone marrow chimera as well as an adoptive transfer approach, we show that CD4 T cell–intrinsic deletion of Blimp-1 reversed CD8 T cell dysfunction and resulted in improved pathogen control. To the best of our knowledge, this is a novel finding, which demonstrates the role of Blimp-1 as a critical regulator of CD4 dysfunction and links it to the CD8 T cell dysfunctionality observed in infected mice. The critical role of CD4-intrinsic Blimp-1 expression in mediating CD4 and CD8 T cell exhaustion may provide a rational basis for designing novel therapeutic approaches. PMID:27481131

Assessing Cognitive Distraction in the Automobile.

Science.gov (United States)

Strayer, David L; Turrill, Jonna; Cooper, Joel M; Coleman, James R; Medeiros-Ward, Nathan; Biondi, Francesco

2015-12-01

The objective was to establish a systematic framework for measuring and understanding cognitive distraction in the automobile. Driver distraction from secondary in-vehicle activities is increasingly recognized as a significant source of injuries and fatalities on the roadway. Across three studies, participants completed eight in-vehicle tasks commonly performed by the driver of an automobile. Primary, secondary, subjective, and physiological measures were collected and integrated into a cognitive distraction scale. In-vehicle activities, such as listening to the radio or an audio book, were associated with a low level of cognitive workload; the conversation activities of talking to a passenger in the vehicle or conversing with a friend on a handheld or hands-free cell phone were associated with a moderate level of cognitive workload; and using a speech-to-text interfaced e-mail system involved a high level of cognitive workload. The research established that there are significant impairments to driving that stem from the diversion of attention from the task of operating a motor vehicle and that the impairments to driving are directly related to the cognitive workload of these in-vehicle activities. Moreover, the adoption of voice-based systems in the vehicle may have unintended consequences that adversely affect traffic safety. These findings can be used to help inform scientifically based policies on driver distraction, particularly as they relate to cognitive distraction stemming from the diversion of attention to other concurrent activities in the vehicle. © 2015, Human Factors and Ergonomics Society.

The Analysis of Vertical Transaction Behavior and Performance Based on Automobile Brand Trust in Supply Chain

Directory of Open Access Journals (Sweden)

Guanglan Zhou

2016-01-01

Full Text Available The nontrust behaviors among the automobile supply chain members lead to a trust crisis situation. Under such circumstances, this paper studies the mutual influences of trust, enterprise behavior, and transaction performance on the independent brand automobile supply chain. The business behavior concept which consists of information sharing, joint action, and specific asset investment is proposed. Then, the paper tests the reliability and validity of the collected data through Structural Equation Modeling (SEM. Through empirical test and analysis on mutual relationship among vertical transaction enterprise behaviors, trust, and transaction performance, the vertical transaction enterprise behaviors can be regulated, so as to improve the efficiency of independent brand automobile supply chain.

Evaluation of genotoxicity in automobile mechanics occupationally exposed to polycyclic aromatic hydrocarbons using micronuclei and other nuclear abnormalities.

Science.gov (United States)

Khan, Mohammed Rafiq; Sudha, Sellappa

2012-01-01

Occupational and environmental exposures mostly represent mixtures of genotoxic agents, whereas the specificity of biomarker measurements varies widely. Exploration of correlations among biomarkers contributes to the further progress of molecular cancer epidemiology and to the selection of the optimal biomarkers for the investigation of human exposure to carcinogens. The aim of this study was to assess the potential cytogenetic damage associated with occupational exposure to Polycyclic Aromatic Hydrocarbons (PAHs) among automobile mechanics by using Micronuclei (MN) and other Nuclear Abnormalities (NA) as a biomarker. The study population composed of 110 occupationally exposed automobile mechanics and 100 unexposed controls. All the study participants were males. Both the exposed and control individuals were selected from automobile garages located in the urban area of Coimbatore City, South India. Exfoliated buccal cells were collected from 110 automobile mechanics and 100 age and sex matched controls. Further, cells were examined for MN frequency and Nuclear Abnormalities (NA) other than micronuclei, such as binucleates, broken eggs and karyolysis. Results showed a statistically significant difference between occupationally exposed automobile mechanics and control groups. MN and NA frequencies in automobile mechanics were significantly higher than those in control groups (p < 0.05) and also significantly related to smoking habit (p < 0.05). In addition, a higher degree of NA was observed among the exposed subjects with smoking, drinking, tobacco chewing, which is an indicative of cytogenetic damage in these individuals. MN and other NA reflect genetic changes, events associated with carcinogenesis. Therefore, the results of this study indicate that automobile mechanics exposed to PAHs are under risk of significant cytogenetic damage. Therefore, it is important to provide and offer better awareness of occupational hazards among these workers to promote

Alternative propulsion for automobiles

CERN Document Server

Stan, Cornel

2017-01-01

The book presents – based on the most recent research and development results worldwide - the perspectives of new propulsion concepts such as electric cars with batteries and fuel cells, and furthermore plug in hybrids with conventional and alternative fuels. The propulsion concepts are evaluated based on specific power, torque characteristic, acceleration behaviour, specific fuel consumption and pollutant emissions. The alternative fuels are discussed in terms of availability, production, technical complexity of the storage on board, costs, safety and infrastructure. The book presents summarized data about vehicles with electric and hybrid propulsion. The propulsion of future cars will be marked by diversity – from compact electric city cars and range extender vehicles for suburban and rural areas up to hybrid or plug in SUV´s, Pick up´s and luxury class automobiles.

Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

Energy Technology Data Exchange (ETDEWEB)

Zhu, W B; Li, D S; Lu, Y [China Jiliang University, Hangzhou, Zhejiang province, 310018 (China)

2006-10-15

Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request.

Investigation of Electrical Energy Efficiency Use in an Automobile Assembly Industry

Directory of Open Access Journals (Sweden)

Jacob TSADO

2016-12-01

Full Text Available This research work investigated the electrical energy efficiency improvement and cost saving potentials for automobile assembly plant; a case of Peugeot Automobile Nigeria Limited. The study identified lighting system as a major source through which energy is being wasted, hence efficient energy saving lighting systems are being proffered; also saving accrued were determined to justify their deployment. In the course of this work, an energy saving calculating tool was developed to calculate energy saving capabilities using energy efficient lamps. With ample devotion to the implementation of the recommendations made, the cost of energy per car will be drastically reduced while profits are also made simultaneously. In all, more cars will be produced thus translating to more employment opportunities in the industry.

Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

International Nuclear Information System (INIS)

Zhu, W B; Li, D S; Lu, Y

2006-01-01

Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request

Children's Exhaustive Readings of Questions

Science.gov (United States)

Cremers, Alexandre; Tieu, Lyn; Chemla, Emmanuel

2017-01-01

Questions, just like plain declarative sentences, can give rise to multiple interpretations. As discussed by Spector & Egré (2015), among others, questions embedded under know are ambiguous between "weakly exhaustive" (WE), "intermediate exhaustive" (IE), and "strongly exhaustive" (SE) interpretations (for…

Dioxin emission factors for automobiles from tunnel air sampling in Northern Taiwan.

Science.gov (United States)

Chang, Moo Been; Chang, Shu Hao; Chen, Yuan Wu; Hsu, Hsuan Chien

2004-06-05

This study measured PCDD/F concentrations in tunnel air and vehicle exhaust. The ambient air samples were collected with air samplers (Tisch PS-1) complying with USEPA TO-9A. The results indicate that the tunnel air had a PCDD/F TEQ concentration about two times as high as that of outside air (47.3 and 57.1 fg-I-TEQ/m3 for tunnel air vs. 37.1 fg-I-TEQ/m3 and 23.3 fg-I-TEQ/m3 for outside air, respectively). This provides the direct evidence that PCDD/F compounds are emitted from the combustion processes in gasoline- and diesel-fueled engines. According to the tunnel study, the emission factors ranged from 5.83 to 59.2 pg I-TEQ/km for gasoline vehicles and 23.32 to 236.65 pg I-TEQ/km of diesel vehicles. This indicates that the dioxin emission factor in Taiwan is lower than that measured in USA, Norway and Germany. When the speed of the diesel vehicle was set at 40 km/h, the dioxin concentration emitted from diesel vehicle was 278 pg/m3 (6.27 pg-I-TEQ/m3) from tailpipe testing. However, when the diesel vehicle was idled, the dioxin concentration increased greatly to 4078 pg/m3 (41.9 pg-I-TEQ/m3). From the results of tunnel air sampling, the PCDD/Fs emission from automobiles in Taiwan was estimated as 3.69 g I-TEQ per year. Copryright 2003 Elsevier B.V.

SYNTHESIS OF AUTOMOBILE IGNITION SYSTEM USING OZONIZED FUEL

Directory of Open Access Journals (Sweden)

O. M. Pilipenko

2015-01-01

Full Text Available The paper presents a mathematical model for electronic control system of the angular ignition timing (AIT in the (ICE, which is running on ozonized fuel. An algorithm for  ignition system control of internal combustion engine using ozonized fuel has been developed in the paper. A structure of the dynamic ignition system while using a control unit for supplying  ozone into fuel with a purpose to improve automobile ecological and economical indices adapted to operational conditions. Application of the given system allows to ensure minimum reduction of operational petrol consumption and concentration of incomplete combustion products due to optimum ozone dosage into the fuel.  The paper proposes a controlled automobile ignition system as a sequential scheme which has a great number of discrete inputs and outputs and many discrete internal  states. The scheme establishes a functional dependence between input and output states. The paper provides an assessment of ecological indices according to massive emissions of carbon monoxide СО, hydrocarbon СпНт and nitric oxide NOx .  The analysis of  investigations results has been carried out in the paper.

The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

Energy Technology Data Exchange (ETDEWEB)

Appert, O.; Pinchon, Ph.

2004-07-01

In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

Effects of exhaust temperature on helicopter infrared signature

International Nuclear Information System (INIS)

Cheng-xiong, Pan; Jing-zhou, Zhang; Yong, Shan

2013-01-01

The effects of exhaust temperature on infrared signature (in 3–5 μm band) for a helicopter equipped with integrative infrared suppressor were numerically investigated. The internal flow of exhaust gas and the external downwash flow, as well as the mixing between exhaust gas and downwash were simulated by CFD software to determine the temperature distributions on the helicopter skin and in the exhaust plume. Based on the skin and plume temperature distributions, a forward–backward ray-tracing method was used to calculate the infrared radiation intensity from the helicopter with a narrow-band model. The results show that for a helicopter with its integrative infrared suppressor embedded inside its rear airframe, the exhaust temperature has significant influence on the plume radiation characteristics, while the helicopter skin radiation intensity has little impact. When the exhaust temperature is raised from 900 K to 1200 K, the plume radiation intensity in 3–5 μm band is increased by about 100%, while the skin radiation intensity is increased by only about 5%. In general, the effects of exhaust temperature on helicopter infrared radiation intensity are mainly concentrated on plume, especially obvious for a lower skin emissivity case. -- Highlights: ► The effect of exhaust temperature on infrared signature for a helicopter is numerically investigated. ► The impact of exhaust temperature on helicopter skin temperature is revealed. ► The impact of exhaust temperature on plume radiation characteristics is revealed. ► The impact of exhaust temperature on helicopter skin radiation is revealed. ► The impact of exhaust temperature on helicopter's total infrared radiation intensity is revealed

Experimental and simulation-based investigations of marine diesel engine performance against static back pressure

NARCIS (Netherlands)

Sapra, H.D.; Godjevac, M.; Visser, K.; Stapersma, D.; Dijkstra, Chris

2017-01-01

After-treatment technologies are adopted in automobiles and ships to meet strict emission regulations, which increase exhaust back pressure. Furthermore, underwater exhaust systems are employed on board ships to save space, and reduce noise and pollution on working decks. However, water at

Influence of Product Quality, Brand Image and Price Concerning Automobile Buying Decision of Toyota Avanza at PT. Nasmoco Majapahit Semarang

OpenAIRE

Putra, Arya Willis Nugraha; Waluyo, Handoyo Djoko; Nugraha, Hari Susanta

2015-01-01

This research was based on rapid automotive sector business development, especially automobile. Specifically, this research was discuss about automobile buying of Toyota Avanza brand at PT Nasmoco Majapahit Semarang during 2011 - 2014 keep have sale descending and it's sale target. If that case wasn't improve and solve, probably will presence problem for PT. Nasmoco Majapahit Semarang next.Aim of this research was to found product quality, brand image and price concerning automobile buying de...

29 CFR 500.104 - Department of Labor standards for passenger automobiles and station wagons and transportation of...

Science.gov (United States)

2010-07-01

... holding on an incline. Brake systems shall be free of leaks. (c) Tires. Tires shall have at least 2/32... 29 Labor 3 2010-07-01 2010-07-01 false Department of Labor standards for passenger automobiles and... of Labor standards for passenger automobiles and station wagons and transportation of seventy-five...

Micro-electronics and employment in the Japanese automobile industry.

OpenAIRE

Watanabe, S

1984-01-01

ILO pub-WEP pub. Working paper on the employment effects of microelectronics technological change and industrial robots in the motor vehicle industry in Japan - examines industrial processes, labour productivity, job requirements of automobile workers, effects on the subcontracting system and small scale industry, diffusion patterns and prospects, etc. Bibliography, references and statistical tables.

485 assessment of the problems of manual automobile tyre bead

African Journals Online (AJOL)

eobe

rim bead bond must be broken to carry out repairs on a failed automobile tyre. ... engine will not be transformed into the motion of the vehicle. It provides the only point of contact between ..... Popular Mechanic 162 (6): 62. http://books.google.

Factors behind international relocation and changes in production geography in the European automobile components industry

OpenAIRE

Jesús F. Lampón; Santiago Lago-Peñas

2013-01-01

This article analyses business strategies in the automobile sector to determine the key factors behind production relocation processes in automobile components suppliers. These factors help explain changes in production geography in the sector not only in terms of location advantages but also from a perspective of corporate strategies and decision-making mechanisms within firms. The results obtained from an empirical study in Spain during the period 2001-2008 show how the components sector h...

Chinese automobile industry: opportunities and business; El sector automovilistico Chino: oportunidades y negocios

Energy Technology Data Exchange (ETDEWEB)

Zhang Zhang, Y.

2010-07-01

The emergence of Chinese economy and its rapid recovery from global crisis have sustained a high rate of growth in Chinese automobile market. The article analyzes the industrial evolution of this particular market from the perspective of automobile manufacturers. Two concrete proposals have been suggested to explore these business opportunities exposed in the analyzed industry: investment in China to take advantage of market growth and hence gaining global competitive advantages, and being strategic partner of Chinese enterprises in European and global market. Strategic alternatives for both proposals have been discussed with suggestions and conclusions followed. (Author) 11 refs.

46 CFR 182.430 - Engine exhaust pipe installation.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 182.430 Section 182... 100 GROSS TONS) MACHINERY INSTALLATION Specific Machinery Requirements § 182.430 Engine exhaust pipe... equipment might come in contact with an exhaust pipe. (b) Exhaust gas must not leak from the piping or any...

46 CFR 119.430 - Engine exhaust pipe installation.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 119.430 Section 119... INSTALLATION Specific Machinery Requirements § 119.430 Engine exhaust pipe installation. (a) The design of all... an exhaust pipe. (b) Exhaust gas must not leak from the piping or any connections. The piping must be...

Additives: The key for automobiles to meet new emission standards

International Nuclear Information System (INIS)

Friedman, J.R.

1992-01-01

Many cities have been perplexed with automobile emissions causing them to become non-attainment areas. These cities usually resort to such tactics as trying to get people to car pool. In principle the concept is excellent, however, the American public is not ready to give up the independence of using their own automobile. Reformulated gasolines are presently being produced and plans for additional plants are being made to meet EPA gasoline requirements. How much reformulated gasoline is available? Where is the present production going? Who else has needs? Does Gasohol have any possibilities still? What contribution can other additives make and are there any bright spots on the horizon and if so what are they? All this will be revealed in this talk and paper at ETE. There will also be a panel discussion for others to present their ideas and contribute to the program

ITER TASK T299 (1995): HITEX demonstration tests

International Nuclear Information System (INIS)

Rodrigo, L.; Miller, J.M.; Senohrabek, J.A.; Busigin, A.; Gierszewski, P.

1996-01-01

The objective of this task is to demonstrate processes for different cleanup and detritiation of the plasma exhaust. In this subtask, the objectives were to provide further design data on the HITEX process, and to build and demonstrate 2-stage high-detritiation HITEX performance. (author). 5 refs., 10 tabs., 21 figs

Potential to sequester carbon in Canadian forests: Some economic considerations

International Nuclear Information System (INIS)

Kooten, G.C. van; Arthur, L.M.; Wilson, W.R.

1992-01-01

The potential role of reforestation policies in reducing Canada's contribution to atmospheric CO 2 is examined. The results indicate sequestering carbon by reforestation of forest lands may be a cost-effective means for Canada to offset domestic emissions of CO 2 from other sources, and that planting forests on marginal agricultural lands also warrants consideration. But these policies need to be compared with alternatives for reducing CO 2 emissions to determine their relative cost-effectiveness. It is found that reforestation is more costly than policies to increase the fuel efficiency of automobiles, but economically more efficient than converting vehicles to natural gas. Forestation can make an important contribution to reduced atmospheric accumulation of carbon after the more cost-effective strategy, replacing less fuel-efficient automobiles, is exhausted (i.e. when the marginal costs of automobile emissions increase beyond those of forestation alternatives). Finally, it is demonstrated that, because of its vast forests, Canada is a net carbon sink. 26 refs., 2 figs., 4 tabs

Exhaust gas recirculation for advanced diesel combustion cycles

International Nuclear Information System (INIS)

Asad, Usman; Zheng, Ming

2014-01-01

Highlights: • Analysis of the incremental (cycle-by-cycle) build-up of EGR. • Proposed one-step equations for transient/steady-state gas concentration estimation. • Defined an in-cylinder excess-air ratio to account for the recycled oxygen with EGR. • Demonstrated the use of intake oxygen as a reliable measure of EGR effectiveness. • Demonstrated the impact of engine load and intake pressure on EGR effectiveness. - Abstract: Modern diesel engines tend to utilize significantly large quantities of exhaust gas recirculation (EGR) and high intake pressures across the engine load range to meet NOx targets. At such high EGR rates, the combustion process and exhaust emissions tend to exhibit a marked sensitivity to small changes in the EGR quantity, resulting in unintended deviations from the desired engine performance characteristics (energy efficiency, emissions, stability). An accurate estimation of EGR and its effect on the intake dilution are, therefore, necessary to enable its application during transient engine operation or unstable combustion regimes. In this research, a detailed analysis that includes estimation of the transient (cycle-by-cycle) build-up of EGR and the time (engine cycles) required to reach the steady-state EGR operation has been carried out. One-step global equations to calculate the transient and steady-state gas concentrations in the intake and exhaust are proposed. The effects of engine load and intake pressure on EGR have been examined and explained in terms of intake charge dilution and in-cylinder excess-air ratio. The EGR analysis is validated against a wide range of empirical data that include low temperature combustion cycles, intake pressure and load sweeps. This research intends to not only formulate a clear understanding of EGR application for advanced diesel combustion but also to set forth guidelines for transient analysis of EGR

Selective gas exhaustion method

International Nuclear Information System (INIS)

Hirano, Yoichi

1998-01-01

The present invention provides a method capable of evacuating gases at an exhaustion rate which varies depending on the kind of gases. For example, in a thermonuclear experimental device, a hydrogen gas exhaustion rate is determined to 0 and an exhaustion rate for other impure gases is made greater. Namely, a baffle plate is cooled to a temperature to a level at which the vapor pressure of gases to evacuate a baffle plate is required in a pump incorporating a baffle plate, for example, a cryopump or a sorption pump. In this case, the level of the vapor pressure required for evacuating the exhaustion gas ingredients is 1 x 10 -8 Torr or less, preferably, 1 x 10 -9 Torr. In a thermonuclear experimental device, a gas having a lower boiling point next to hydrogen is neon, but neon is scarcely present in natural world. Nitrogen has a lower boiling point next thereto, and if the temperature is lowered to such a level that the vapor pressure for evacuating gases such as nitrogen, and carbon monoxide, oxygen, fluorine, argon or methane having a boiling point at or lower than nitrogen is required. Then, evacuation rate sufficient for gases other than hydrogen gas can be obtained. (I.S.)

A two wave cross-lagged study of work-role conflict, work-family conflict and emotional exhaustion.

Science.gov (United States)

Jensen, Maria Therese

2016-12-01

By using a two-wave panel design, the present study aimed to study causal, reversed, and reciprocal relations among work-role conflict, work-family conflict, and emotional exhaustion. The Conservation of Resources theory was applied as a theoretical framework. The study was conducted in a large Norwegian oil and gas company (n = 1703). The results demonstrated positive cross-lagged effects of work-role conflict and work-family conflict on emotional exhaustion. In addition, emotional exhaustion predicted work-family conflict over time, and work-family conflict predicted work-role conflict over time, indicating the presence of reciprocal effects. The current study adds new knowledge to the positioning of work-family conflict in relation to perceived conflict in the workplace and emotional exhaustion. © 2016 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

The Influence of Inlet Asymmetry on Steam Turbine Exhaust Hood Flows.

Science.gov (United States)

Burton, Zoe; Hogg, Simon; Ingram, Grant L

2014-04-01

It has been widely recognized for some decades that it is essential to accurately represent the strong coupling between the last stage blades (LSB) and the diffuser inlet, in order to correctly capture the flow through the exhaust hoods of steam turbine low pressure cylinders. This applies to any form of simulation of the flow, i.e., numerical or experimental. The exhaust hood flow structure is highly three-dimensional and appropriate coupling will enable the important influence of this asymmetry to be transferred to the rotor. This, however, presents challenges as the calculation size grows rapidly when the full annulus is calculated. The size of the simulation means researchers are constantly searching for methods to reduce the computational effort without compromising solution accuracy. However, this can result in excessive computational demands in numerical simulations. Unsteady full-annulus CFD calculation will remain infeasible for routine design calculations for the foreseeable future. More computationally efficient methods for coupling the unsteady rotor flow to the hood flow are required that bring computational expense within realizable limits while still maintaining sufficient accuracy for meaningful design calculations. Research activity in this area is focused on developing new methods and techniques to improve accuracy and reduce computational expense. A novel approach for coupling the turbine last stage to the exhaust hood employing the nonlinear harmonic (NLH) method is presented in this paper. The generic, IP free, exhaust hood and last stage blade geometries from Burton et al. (2012. "A Generic Low Pressure Exhaust Diffuser for Steam Turbine Research,"Proceedings of the ASME Turbo Expo, Copenhagen, Denmark, Paper No. GT2012-68485) that are representative of modern designs, are used to demonstrate the effectiveness of the method. This is achieved by comparing results obtained with the NLH to those obtained with a more conventional mixing

Heat rejection efficiency research of new energy automobile radiators

Science.gov (United States)

Ma, W. S.; Shen, W. X.; Zhang, L. W.

2018-03-01

The driving system of new energy vehicle has larger heat load than conventional engine. How to ensure the heat dissipation performance of the cooling system is the focus of the design of new energy vehicle thermal management system. In this paper, the heat dissipation efficiency of the radiator of the hybrid electric vehicle is taken as the research object, the heat dissipation efficiency of the radiator of the new energy vehicle is studied through the multi-working-condition enthalpy difference test. In this paper, the test method in the current standard QC/T 468-2010 “automobile radiator” is taken, but not limited to the test conditions specified in the standard, 5 types of automobile radiator are chosen, each of them is tested 20 times in simulated condition of different wind speed and engine inlet temperature. Finally, regression analysis is carried out for the test results, and regression equation describing the relationship of radiator heat dissipation heat dissipation efficiency air side flow rate cooling medium velocity and inlet air temperature is obtained, and the influence rule is systematically discussed.

The impact of internationalisation and rationalisation of production on the Spanish automobile industry, 1950 - 90

OpenAIRE

A Lagendijk

1995-01-01

The author examines the impact of the internationalisation of automobile production on the local production system in Spain, with emphasis on the relationship between the assembly and supply industries. After an introduction to the issue of linkage formation in the automobile industry, a historical overview of the development of the Spanish production system since the 1950s is presented. This is followed by an analysis of recent changes in the production and procurement strategies of internat...

The effect of exhaust plume/afterbody interaction on installed Scramjet performance

Science.gov (United States)

Edwards, Thomas Alan

1988-01-01

Newly emerging aerospace technology points to the feasibility of sustained hypersonic flight. Designing a propulsion system capable of generating the necessary thrust is now the major obstacle. First-generation vehicles will be driven by air-breathing scramjet (supersonic combustion ramjet) engines. Because of engine size limitations, the exhaust gas leaving the nozzle will be highly underexpanded. Consequently, a significant amount of thrust and lift can be extracted by allowing the exhaust gases to expand along the underbody of the vehicle. Predicting how these forces influence overall vehicle thrust, lift, and moment is essential to a successful design. This work represents an important first step toward that objective. The UWIN code, an upwind, implicit Navier-Stokes computer program, has been applied to hypersonic exhaust plume/afterbody flow fields. The capability to solve entire vehicle geometries at hypersonic speeds, including an interacting exhaust plume, has been demonstrated for the first time. Comparison of the numerical results with available experimental data shows good agreement in all cases investigated. For moderately underexpanded jets, afterbody forces were found to vary linearly with the nozzle exit pressure, and increasing the exit pressure produced additional nose-down pitching moment. Coupling a species continuity equation to the UWIN code enabled calculations indicating that exhaust gases with low isentropic exponents (gamma) contribute larger afterbody forces than high-gamma exhaust gases. Moderately underexpanded jets, which remain attached to unswept afterbodies, underwent streamwise separation on upswept afterbodies. Highly underexpanded jets produced altogether different flow patterns, however. The highly underexpanded jet creates a strong plume shock, and the interaction of this shock with the afterbody was found to produce complicated patterns of crossflow separation. Finally, the effect of thrust vectoring on vehicle balance has

System for measuring engine exhaust constituents

International Nuclear Information System (INIS)

Carduner, K.R.; Colvin, A.D.; Leong, D.Y.W.

1992-01-01

This patent describes a system for measuring an automotive engine exhaust constituent. It comprises: a meter for determining the mass of air flowing through the engine and for generating an engine airflow signal corresponding to the airflow; sample handling apparatus; diluent adding means; processor means. This patent also describes a method for using an analyzer to determine the amount of lubricating oil consumed by an automotive engine. It comprises: determining the amount of sulfur dioxide within the room air being drawn into the engine; maintaining a constant total flow comprised of a constant fraction of the engine's exhaust gas and a diluent gas through the analyzer, while: determining the amount of sulfur dioxide contained within the engine's exhaust, determining the amount of sulfur dioxide contained within the engine's exhaust, while operating the engine on room air; determining an efficiency factor for the analyzer; and using the efficiency factor and the concentration of sulfur in the engine oil and the amounts of sulfur dioxide determined in steps a and d to determine the amount of lubrication oil leaving the engine through its exhaust

Method for removing soot from exhaust gases

Science.gov (United States)

Suib, Steven L.; Dharmarathna, D. A. Saminda; Pahalagedara, Lakshitha R.

2018-01-16

A method for oxidizing soot from diesel exhaust gas from a diesel engine. The method involves providing a diesel particulate filter for receiving the diesel exhaust gas; coating a catalyst composition on the diesel particulate filter; and contacting the soot from the diesel exhaust gas with the catalyst coated diesel particulate filter at a temperature sufficient to oxidize the soot to carbon dioxide. The catalyst composition is a doped or undoped manganese oxide octahedral molecular sieve (OMS-2) material. A diesel exhaust gas treatment system that includes a diesel particulate filter for receiving diesel exhaust gas from a diesel engine and collecting soot; and a catalyst composition coated on the diesel particulate filter. The catalyst composition is a doped or undoped manganese oxide octahedral molecular sieve (OMS-2).

Automotive Fuel and Exhaust Systems.

Science.gov (United States)

Irby, James F.; And Others

Materials are provided for a 14-hour course designed to introduce the automotive mechanic to the basic operations of automotive fuel and exhaust systems incorporated on military vehicles. The four study units cover characteristics of fuels, gasoline fuel system, diesel fuel systems, and exhaust system. Each study unit begins with a general…

Assessment of the Problems of Manual Automobile Tyre Bead ...

African Journals Online (AJOL)

The tyre-rim bead bond must be broken to carry out repairs on a failed automobile tyre. The use of the locally fabricated manual bead breaking equipment as it is being practiced today by commercial tyre repair artisans in Nigeria is characterized by drudgery. This article reports a study of the local manual bead breaking ...

Modernization of the Russian Automobile Road Network on the Base of Innovative Technologies

Directory of Open Access Journals (Sweden)

E. A. Zhukov

2017-01-01

Full Text Available Purpose: the main goal of the article is to build a conceptual model for the organization of effective functioning of the points of economic and innovative growth of the region in modern conditions, taking into account regional and municipal limitations of internal and external nature, with the aim of ensuring economic security, effective interaction of subjects of the "business-power" system Taking into account the influence of institutional factors. Methods: in the present study the following methods were used: systemic approach, methods of social diagnosis, comparative analysis, method of expert evaluations, and method of statistical processing of information. Results: the short characteristic of modern development and technical level of the Russian automobile roads network as the important part of the automobile roads material-technical base is presented. Realization process of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads is analyzed. The reality of decision this task due to modernization roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction is scientifically proved. Conclusions and Relevance: in spite of losing now in decision of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads, nevertheless the real possibilities to reach the important aim still remain. It may be done only due to scientifically grounded modernization of the roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction 

A Study of Structural Stress Technique for Fracture Prediction of an Auto-Mobile Clutch Snap-Ring

International Nuclear Information System (INIS)

Kim, Ju Hee; Myeong, Man Sik; Oh, Chang Sik; Kim, Yun Jae

2016-01-01

The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method

Determinants of EDI (Electronic Data Interchange) Adoption and Integration in the US and Japanese Automobile Suppliers

OpenAIRE

Sam Kurokawa; Seiji Manabe

2002-01-01

This paper examines determinants of EDI adoption and integration in the US and Japanese automobile suppliers. The paper constructs several hypotheses based on the transaction-cost and resource- dependence approaches, and tests these hypotheses by using data from the automobile suppliers. Our study shows: (1) the resource-dependence approach seemed more effective in explaining EDI adoption, while the transaction-cost approach seemed more effective in explaining EDI integration; (2) the transac...

Reduced-Order Computational Model for Low-Frequency Dynamics of Automobiles

Directory of Open Access Journals (Sweden)

A. Arnoux

2013-01-01

Full Text Available A reduced-order model is constructed to predict, for the low-frequency range, the dynamical responses in the stiff parts of an automobile constituted of stiff and flexible parts. The vehicle has then many elastic modes in this range due to the presence of many flexible parts and equipment. A nonusual reduced-order model is introduced. The family of the elastic modes is not used and is replaced by an adapted vector basis of the admissible space of global displacements. Such a construction requires a decomposition of the domain of the structure in subdomains in order to control the spatial wave length of the global displacements. The fast marching method is used to carry out the subdomain decomposition. A probabilistic model of uncertainties is introduced. The parameters controlling the level of uncertainties are estimated solving a statistical inverse problem. The methodology is validated with a large computational model of an automobile.

Role of fin material and nanofluid in performance enhancement of automobile radiator

Science.gov (United States)

Jadar, Raju; Shashishekar, K. S.; Channa Keshava Naik, N.

2018-04-01

An effective cooling system can avoid engine and its components from overheating and helps in achieving optimum engine performance. This work deals with the fabrication and performance evaluation of an automobile radiator with i) Aluminum fins and ii) Al-MWCNT fins using 0.1 w/v% f-MWCNT nanofluid. F-MWCNT nanoparticles in the base fluid improves the rate of heat transfer in an automobile radiator integrated with Al-MWCNT fins. The enhancement of heat transfer mainly depends on the quantity of F-MWCNT nanoparticles added to the host fluid. During the study it was found that at a low weight by volume concentration of nanofluid the heat transfer enhancement of 8% was achieved using Al-MWCNT fins compared to base fluid.

Exhaust emissions from an indirect injection dual-fuel engine

International Nuclear Information System (INIS)

Abd Alla, G.H.; Badr, O.A.; Soliman, H.A.; Abd Rabbo, M.F.

2000-01-01

Diesel engines operating on gaseous fuels are commonly known as dual-fuel engines. In the present work, a single-cylinder, compression ignition, indirect injection research (Ricardo E6) engine has been installed at United Arab Emirates University for investigation of the exhaust emissions when the engine is operating as a dual-fuel engine. The influence of changes in major operating and design parameters, such as the concentration of gaseous fuel in the cylinder charge, pilot fuel quantity, injection timing and intake temperature, on the production of exhaust emissions was investigated. Diesel fuel was used as the pilot fuel, while methane or propane was used as the main fuel which was inducted in the intake manifold and mixed with the intake air. The experimental investigations showed that the poor emissions at light loads can be improved significantly by increasing the concentration of gaseous fuel (total equivalence ratio), employing a large pilot fuel quantity, advancing the injection timing of the pilot fuel and increasing the intake temperature. It is demonstrated that, in general, any measure that tends to increase the size of the combustion regions within the overly lean cylinder charge will reduce markedly the concentrations of unburned hydrocarbons and carbon monoxide in the exhaust gases. (Author)

Exhaust emissions from an indirect injection dual-fuel engine

Energy Technology Data Exchange (ETDEWEB)

Abd Alla, G.H.; Badr, O.A.; Soliman, H.A.; Abd Rabbo, M.F. [Zagazig Univ., Dept. of Mechanical Engineering, Cairo (Egypt)

2000-04-01

Diesel engines operating on gaseous fuels are commonly known as dual-fuel engines. In the present work, a single-cylinder, compression ignition, indirect injection research (Ricardo E6) engine has been installed at United Arab Emirates University for investigation of the exhaust emissions when the engine is operating as a dual-fuel engine. The influence of changes in major operating and design parameters, such as the concentration of gaseous fuel in the cylinder charge, pilot fuel quantity, injection timing and intake temperature, on the production of exhaust emissions was investigated. Diesel fuel was used as the pilot fuel, while methane or propane was used as the main fuel which was inducted in the intake manifold and mixed with the intake air. The experimental investigations showed that the poor emissions at light loads can be improved significantly by increasing the concentration of gaseous fuel (total equivalence ratio), employing a large pilot fuel quantity, advancing the injection timing of the pilot fuel and increasing the intake temperature. It is demonstrated that, in general, any measure that tends to increase the size of the combustion regions within the overly lean cylinder charge will reduce markedly the concentrations of unburned hydrocarbons and carbon monoxide in the exhaust gases. (Author)

Dislocation Starvation and Exhaustion Hardening in Mo-alloy Nanofibers

Energy Technology Data Exchange (ETDEWEB)

Chisholm, Claire [University of California, Berkeley & LBNL; Bei, Hongbin [ORNL; Lowry, M. B. [University of California, Berkeley; Oh, Jason [Hysitron, Inc., MN; Asif, S.A. Syed [Hysitron, Inc., MN; Warren, O. [Hysitron, Inc., MN; Shan, Zhiwei [Xi' an Jiaotong University, China & Hysitron, Inc., MN; George, Easo P [ORNL; Minor, Andrew [University of California, Berkeley & LBNL

2012-01-01

The evolution of defects in Mo alloy nanofibers with initial dislocation densities ranging from 0 to 1.6 1014 m2 were studied using an in situ push-to-pull device in conjunction with a nanoindenter in a transmission electron microscope. Digital image correlation was used to determine stress and strain in local areas of deformation. When they had no initial dislocations the Mo alloy nanofibers suffered sudden catastrophic elongation following elastic deformation to ultrahigh stresses. At the other extreme fibers with a high dislocation density underwent sustained homogeneous deformation after yielding at much lower stresses. Between these two extremes nanofibers with intermediate dislocation densities demonstrated a clear exhaustion hardening behavior, where the progressive exhaustion of dislocations and dislocation sources increases the stress required to drive plasticity. This is consistent with the idea that mechanical size effects ( smaller is stronger ) are due to the fact that nanostructures usually have fewer defects that can operate at lower stresses. By monitoring the evolution of stress locally we find that exhaustion hardening causes the stress in the nanofibers to surpass the critical stress predicted for self-multiplication, supporting a plasticity mechanism that has been hypothesized to account for the rapid strain softening observed in nanoscale bcc materials at high stresses.

Characteristics of motorcyclists involved in accidents between motorcycles and automobiles.

Science.gov (United States)

Oliveira, Amanda Lima de; Petroianu, Andy; Gonçalves, Dafne Maria Villar; Pereira, Gisele Araújo; Alberti, Luiz Ronaldo

2015-01-01

traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession) and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver's license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11) years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%). Of the motorcyclists who held a car driver's license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver's license for at least one year. among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

Exhaust gas recirculation apparatus for internal combustion engine

Energy Technology Data Exchange (ETDEWEB)

Shigemori, M; Eguchi, N

1975-01-07

An exhaust gas recirculation device to reduce nitrogen oxides emission from internal combustion engines is described. The recirculation is achieved by employing a tube connecting between the exhaust pipe and intake tube. A throttle valve is installed within the exhaust pipe between the muffler and recirculation tube, and regulated by exhaust gas temperature. Whenever the gas temperature is high, the valve closes and increases the gas flow to the intake tube. A temperature sensor is installed within the exhaust pipe and controls a solenoid or magnetic air valve linking to the throttle valve through a relay. The recirculation tube can be cooled by a fan to improve the engine power.

Six changes with the new Regulations on Automobile Loans

Institute of Scientific and Technical Information of China (English)

2004-01-01

<正> On Aug 16, 2004, the People’s Bank of China and China Banking Regulatory Commission (CBRC) jointly issued the new version of the Regulations on Automobile Loans. Due to be put into implementation on Oct 1, the new Regulations change radically compared with the previous version in terms of creditors, possible borrowers, rate of down payments, loan periods, etc.

New Technology and Human Resource Development in the Automobile Industry.

Science.gov (United States)

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

This document contains five case studies of plants within large enterprises in the automobile industry (Ford, Toyota, Volkswagen, Renault, and Volvo), plus reports of each company's views on human resource development, new technology, and changes in work organization and skill formation. The document is composed of five narrative sections,…

Study of CO2 automobile heating system. Paper no. IGEC-1-129

International Nuclear Information System (INIS)

Zha, S.; Hafner, A.

2005-01-01

Carbon dioxide has become a popular working medium in heat pump water heaters and mobile heat pumping systems due to its environment friendliness and its excellent thermal and transport properties in transcritical cycle. It also looks bright as a complete solution to environmental problem associated with automobile air conditionings. As high efficient mobile engines with less waste heat have been developed, extra heating of the passenger compartment is needed in the cold season. In this investigation, three heating solutions for automobile CO 2 air conditioning systems are provided. They are a bypass CO 2 heating cycle, a conventional CO 2 transcritical heat pump cycle and a high capacity heat pump cycle with economizer. These three solutions are compared with the viewpoints of the efficiency and heating capacity. The test results show that the heating capacity of the bypass heating method is only enough for a small automobile although it has the advantage of simple construction and low investment. The heat pump cycle with economizer applying a special construction reciprocating compressor can obtain a highest capacity even in cold climate. But the investment increase for economizer heat pump cycle includes both the modification of the compressor and the flash tank. And the COPh of economizer heat pump cycle is higher than bypass heating cycle, but lower than conventional heat pump cycle due to the highest capacity operation condition. (author)

The automobile and maps in the integration of the Mexican territory, 1929-1962

Directory of Open Access Journals (Sweden)

Héctor Mendoza Vargas

2015-12-01

Full Text Available This article examines a new social geography opened by the use of the automobile and maps in the Mexican territory between 1929 and 1962. In this temporary scenery, the construction of roads during a considerable span of the 20th Century has been identified as part of the modernization plan of the revolutionary governments of Mexico. This infrastructure furnished the opportunity of getting to know the wide variety of landscapes of the country as never before. A set of new traveling experiences was offered to the middle class at the same time that such diversity of Mexican landscapes caused different emotions through the “pleasure” of ersonally contemplating the rivers, mountains, trees, vegetation, the sea, the hamlets, towns or cities. A central element of this perspective was occupied by the automobile; its presence in Mexico meant a cultural novelty with deep effects and changes in the Mexican society of the 20th Century. The new technological element worked as a new mechanism that started circulating by the roads to observe the landscape. Because of this, we propose the application of three key concepts of space analysis: the circulation territory, the visual territory and the experience territory. Each one of them represents the many sides of the landscape as one study object, and of geography interest, as described below. The territory of circulation came about when the railroads decline started in the twenties and consolidated in the sixties of the past century. That is why in this section we first place a comparative perspective of the motorization levels through the number of inhabitants per automobile in several Latin-American countries having available ordered historical statistics on the matter. Results show a long construction of the automobile culture in this geographic region; construction that incorporated new communication and evolution forms of social groups.

Divertor particle exhaust and wall inventory on DIII-D

International Nuclear Information System (INIS)

Maingi, R.; Jackson, G.L.; Mahdavi, M.A.; Schaffer, M.J.; Wade, M.R.; Mioduszewski, P.K.; Hogan, J.T.; Klepper, C.C.; Haas, G.

1995-01-01

Many tokamaks achieve optimum plasma performance by achieving low recycling; various wall conditioning techniques including helium glow discharge cleaning (HeGDC) are routinely applied to help achieve low recycling. Many of these techniques allow strong, transient wall pumping, but they may not be effective for long-pulse tokamaks, such as the International Thermonuclear Experimental Reactor (ITER), the Tokamak Physics Experiment (TPX), Tore Supra Continu, and JT-60SU. Continuous particle exhaust using an in-situ pumping scheme may be effective for wall inventory control in such devices. Recent particle balance experiments on the Tore Supra and DIII-D tokamaks demonstrated that the wall particle inventory could be reduced during a given discharge by use of continuous particle exhaust. In this paper the authors report the first results of wall inventory control and good performance with the in-situ DIII-D cryopump, replacing the HeGDC normally applied between discharges

A NEW EXHAUST VENTILATION SYSTEM DESIGN SOFTWARE

Directory of Open Access Journals (Sweden)

H. Asilian Mahabady

2007-09-01

Full Text Available A Microsoft Windows based ventilation software package is developed to reduce time-consuming and boring procedure of exhaust ventilation system design. This program Assure accurate and reliable air pollution control related calculations. Herein, package is tentatively named Exhaust Ventilation Design Software which is developed in VB6 programming environment. Most important features of Exhaust Ventilation Design Software that are ignored in formerly developed packages are Collector design and fan dimension data calculations. Automatic system balance is another feature of this package. Exhaust Ventilation Design Software algorithm for design is based on two methods: Balance by design (Static pressure balance and design by Blast gate. The most important section of software is a spreadsheet that is designed based on American Conference of Governmental Industrial Hygienists calculation sheets. Exhaust Ventilation Design Software is developed so that engineers familiar with American Conference of Governmental Industrial Hygienists datasheet can easily employ it for ventilation systems design. Other sections include Collector design section (settling chamber, cyclone, and packed tower, fan geometry and dimension data section, a unit converter section (that helps engineers to deal with units, a hood design section and a Persian HTML help. Psychometric correction is also considered in Exhaust Ventilation Design Software. In Exhaust Ventilation Design Software design process, efforts are focused on improving GUI (graphical user interface and use of programming standards in software design. Reliability of software has been evaluated and results show acceptable accuracy.

[The epidemiological study of work-related musculoskeletal disorders and related factors among automobile assembly workers].

Science.gov (United States)

Wang, Zhong-Xu; Qin, Ru-Li; Li, Yu-Zhen; Zhang, Xue-Yan; Jia, Ning; Zhang, Qiu-Ling; Li, Gang; Zhao, Jie; Li, Huan-Huan; Jiang, Hai-Qiang

2011-08-01

To investigate the work-related musculoskeletal disorders among automobile assembly workers, to discusses the related risk factors and their relationship. The selected 1508 automobile assembly workers from a north car manufacturing company were regarded as the study object. The hazard zone jobs checklist, Nordic musculoskeletal symptom questionnaire (NMQ) and pain questionnaire were used to perform the epidemiological cross-sectional and retrospective survey and study for the General status, awkward ergonomics factors and related influencing factors, and musculoskeletal disorders of workers. The predominant body sites of occurring WMSDs among automobile assembly workers were mainly low back, wrist, neck and shoulders, the predominant workshop section of occurring WMSDs were mostly concentrated in engine compartment, interior ornament, door cover, chassis and debugging section. The predominant body site of WMSDs among engine compartment and chassis section workers was low back, interior ornament workers were low back and wrist, door cover workers was wrist, chassis workers was low back, debugging workers were neck and low back. Neck musculoskeletal disorders had the trend with the increase of a body height; Smoking may increase the occurrence of musculoskeletal disorders. The WMSDs appears to be a serious ergonomic proble assem among automobile assembly workers, predominant occurring site of WMSDs is with different workshop section, its characteristics is quite obvious, probably related to its existing awkward work position or activities. The worker height and smoking habits may be important factors which affect musculoskeletal disorders happen.

Vital exhaustion and risk for cancer

DEFF Research Database (Denmark)

Bergelt, Corinna; Christensen, Jane Hvarregaard; Prescott, Eva

2005-01-01

Vital exhaustion, defined as feelings of depression and fatigue, has previously been investigated mainly as a risk factor for cardiovascular disease. The authors investigated the association between depressive feelings and fatigue as covered by the concept of vital exhaustion and the risk...

Development of automobile brake lining using pulverized cow hooves

Directory of Open Access Journals (Sweden)

Katsina C. BALA

2016-06-01

Full Text Available Asbestos has been used for so long as automobile brake lining material because of its good physical and chemical properties. However, due to the health hazard associated with its handling, it has lost favour and several alternative materials are being increasingly used. Asbestos-free brake lining was developed in this work using pulverized cow hooves along with epoxy resin, barium sulphate, graphite and aluminium oxide. This was with a view to exploiting the characteristics of cow hooves, which are largely discarded as waste materials to replace asbestos which has been found to be carcinogenic. Samples of brake linings were produced using compressive moulding in which the physical and mechanical properties of the samples were studied. The results obtained showed that proper bonding was achieved as the percentage by weight of epoxy resin increased and percentage by weight of pulverized cow hooves decreased. The hardness, compressive strength, coefficient of friction, water and oil absorption, relative density and wear rate of the brake linings were determined and compared with existing brake lining properties. The result indicates that pulverized cow hooves can be used as brake lining material for automobiles.

Contextualizing Emotional Exhaustion and Positive Emotional Display : The Signaling Effects of Supervisors' Emotional Exhaustion and Service Climate

NARCIS (Netherlands)

Lam, Catherine K.; Huang, Xu; Janssen, Onne; Lam, K.C.

In this study, we investigated how supervisors' emotional exhaustion and service climate jointly influence the relationship between subordinates' emotional exhaustion and their display of positive emotions at work. Using data from frontline sales employees and their immediate supervisors in a

Wind driven mobile charging of automobile battery- A case study ...

African Journals Online (AJOL)

This paper deals with implementation of mobile wind driven generator technology to produce electricity in charging of two wheeler (12V) automobile battery. The use of PWM methodology with pulse charging method at a constant rate has been adopted for this purpose. The low speed PMSG driven by wind at speed of ...

Diesel exhaust emissions : health effects

Energy Technology Data Exchange (ETDEWEB)

Grenier, M. [Natural Resources Canada, Sudbury, ON (Canada). CANMET Mining and Mineral Sciences Laboratories

2009-07-01

Despite modern day ventilation, underground miners are exposed to diesel particulate matter (DPM) composed of elemental carbon, organic carbon, sulphates, metals and ashes. Diesel exhaust contains over 40 air contaminants that have been recognized as toxic, carcinogenic or reproductive and developmental hazards. Nearly all components of diesel exhaust interact with the human body at the bloodstream or tissue level. This presentation discussed the following 4 potential levels of threat posed by the physical and chemical nature of diesel exhaust: (1) cancer of the lungs and bladder, (2) toxins that affect the nervous, endocrine, reproductive and immune system as well as the liver and kidneys, (3) fine particulate matter that can cause premature death and an increase in respiratory illness, and (4) nitrogen oxides that contribute to increased ozone and smog. Non-cancer health effects from short-term exposure include acute irritation and respiratory symptoms. This presentation also referred to cancer risk assessments of diesel exhaust by national, state, and world health organizations. Particulate exposure standards for Canada, Quebec, Ontario and the United States were listed along with the percentage of DPM samples in excess of various exposure limits in 2008 according to Canadian underground mine data. DPM concentration levels in mines are in the range that environmental agencies would consider high for general population exposure. Solutions for underground mines include pollution control at the source; use of modern engines with certification for underground mining; emissions based maintenance; exhaust treatment; use of clean or alternative fuels such as hydrogen; regular sampling and monitoring; ventilation; training and technology transfer; and regulations. tabs., figs.

Two phase exhaust for internal combustion engine

Science.gov (United States)

Vuk, Carl T [Denver, IA

2011-11-29

An internal combustion engine having a reciprocating multi cylinder internal combustion engine with multiple valves. At least a pair of exhaust valves are provided and each supply a separate power extraction device. The first exhaust valves connect to a power turbine used to provide additional power to the engine either mechanically or electrically. The flow path from these exhaust valves is smaller in area and volume than a second flow path which is used to deliver products of combustion to a turbocharger turbine. The timing of the exhaust valve events is controlled to produce a higher grade of energy to the power turbine and enhance the ability to extract power from the combustion process.

Vital exhaustion and risk for cancer

DEFF Research Database (Denmark)

Bergelt, Corinna; Christensen, Jane Hvarregaard; Prescott, Eva

2005-01-01

Vital exhaustion, defined as feelings of depression and fatigue, has previously been investigated mainly as a risk factor for cardiovascular disease. The authors investigated the association between depressive feelings and fatigue as covered by the concept of vital exhaustion and the risk...... for cancer....

EVOLUTIONS IN GLOBAL AUTOMOBILES INDUSTRY

Directory of Open Access Journals (Sweden)

Viorel Pop

2013-09-01

Full Text Available This paper is a brief overview of the evolution of the global automotive industry during the 20th century, with reference to the main manufacturers, oil crises of 1970-1980, and also the global financial and economic crisis that began in 2008. The analyzed period covers the rise of the Asian Continent, beginning with Japan, then South Korea and more recently the emerging countries: China and India. What was predicted 20-25 years ago, became reality: Asia becomes the economic centre of the world, surpassing unexpectedly fast even the Euro-Atlantic area. Regarding Romania, the revival delay of the automobiles industry, led to the loss of the trucks and bus industry, and after a much awaited rehabilitation of car production, this has stuck now at an unsatisfactory level.

Performance of Installed Cooking Exhaust Devices

Energy Technology Data Exchange (ETDEWEB)

Singer, Brett C.; Delp, William W.; Apte, Michael G.; Price, Philip N.

2011-11-01

The performance metrics of airflow, sound, and combustion product capture efficiency (CE) were measured for a convenience sample of fifteen cooking exhaust devices, as installed in residences. Results were analyzed to quantify the impact of various device- and installation-dependent parameters on CE. Measured maximum airflows were 70% or lower than values noted on product literature for 10 of the devices. Above-the-cooktop devices with flat bottom surfaces (no capture hood) – including exhaust fan/microwave combination appliances – were found to have much lower CE at similar flow rates, compared to devices with capture hoods. For almost all exhaust devices and especially for rear-mounted downdraft exhaust and microwaves, CE was substantially higher for back compared with front burner use. Flow rate, and the extent to which the exhaust device extends over the burners that are in use, also had a large effect on CE. A flow rate of 95 liters per second (200 cubic feet per minute) was necessary, but not sufficient, to attain capture efficiency in excess of 75% for the front burners. A-weighted sound levels in kitchens exceeded 57 dB when operating at the highest fan setting for all 14 devices evaluated for sound performance.

Helium Exhaust Studies in H-Mode Discharges in the DIII-D Tokamak Using an Argon-Frosted Divertor Cryopump

International Nuclear Information System (INIS)

Wade, M.R.; Hillis, D.L.; Hogan, J.T.; Mahdavi, M.A.; Maingi, R.; West, W.P.; Brooks, N.H.; Burrell, K.H.; Groebner, R.J.; Jackson, G.L.; Klepper, C.C.; Laughon, G.; Menon, M.M.; Mioduszewski, P.K.

1995-01-01

The first experiments demonstrating exhaust of thermal helium in a diverted, H-mode deuterium plasma have been performed on the DIII-D tokamak. The helium, introduced via gas puffing, is observed to reach the plasma core, and then is readily removed from the plasma with a time constant of ∼10--20 energy-confinement times by an in-vessel cryopump conditioned with argon frosting. Detailed analysis of the helium profile evolution suggests that the exhaust rate is limited by the exhaust efficiency of the pump (∼5%) and not by the intrinsic helium-transport properties of the plasma

Individualized solutions to environmental problems: a case of automobile pollution

Energy Technology Data Exchange (ETDEWEB)

Urmetzer, P.; Blake, D. E.; Guppy, N. [British Columbia Univ., Vancouver, BC (Canada)

1999-09-01

Air pollution associated with motor vehicle use is one of the prime indicators of the tension between consumerism and the environment. The use of private automobiles seems so convenient, whereas the alternatives are off-putting enough to make significant changes in personal transportation behaviour well-nigh impossible. At the same time, combating the air pollution associated with extensive use of cars has become one of the major policy objectives for cities around the world. Available policy alternatives can be divided into two categories: (1) incentives, such as improved public transportation, and (2) disincentives, such as environmental tax on gasoline. This paper attempt to directly assess links between these two alternatives, associated attitudes towards them, the level of public support for command and control (i.e. regulatory) policy approaches as well as for economic incentive/disincentive policies. Answers are sought and findings discussed relative to the link between opinions about the environment and support for different types of environmental policies, the usefulness of a rational choice perspective in explaining support for environmental policy alternatives, the role that partisan political attachments play in support of environmental policy approaches, and the roles played by environmental activism, knowledge, and action in shaping support for environmental policy alternatives. Overall results indicate that while most people living in urban environments support the ideas of environmental protection and would be willing to incur costs to confront the problem, exposure to air pollution plays an inconsequential (actually nearly non-existent) role in support of automobile-related environmental problems. Automobile users act like 'free-riders' i.e. they tend to support policies that socialize the cost of solutions rather than policies that attempt to pass the cost of pollution directly on to individual car owners. A sample of the responses to

Characteristics of motorcyclists involved in accidents between motorcycles and automobiles

Directory of Open Access Journals (Sweden)

Amanda Lima de Oliveira

2015-02-01

Full Text Available Introduction: traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. Objective: this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. Method: this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver’s license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. Results: of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11 years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%. Of the motorcyclists who held a car driver’s license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver’s license for at least one year. Conclusion: among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

The photo-oxidation of automobile emissions: measurements of the transformation products and their mutagenic activity

Science.gov (United States)

Kleindienst, Tadeusz E.; Smith, David F.; Hudgens, Edward E.; Snow, Richard F.; Perry, Erica; Claxton, Larry D.; Bufalini, Joseph J.; Black, Francis M.; Cupitt, Larry T.

Dilute mixtures of automobile emissions (comprising 50% exhaust and 50% surrogate evaporative emissions) were irradiated in a 22.7 m 3 smog chamber and tested for mutagenic activity by using a variant of the Ames test. The exhaust was taken from a single vehicle, a 1977 Ford Mustang equipped with a catalytic converter. Irradiated and nonirradiated gas-phase emissions were used in exposures of the bacteria, Salmonella typhimurium, strains TA100 and TA98. A single set of vehicular operating conditions was used to perform multiple exposures. The mutagenic activities of extracts from the particulate phase were also measured with the standard plate incorporation assay. (In most experiments only direct-acting mutagenic compounds were measured.) The gas-phase data for TA100 and TA98 showed increased activity for the irradiated emissions when compared to the nonirradiated mixture, which exhibited negligible activity with respect to the control values. The particulate phase for both the irradiated and nonirradiated mixtures showed negligible activity when results were compared to the control values for both strains. However, the experimental conditions limited the amount of extractable mass which could be collected in the particulate phase. The measured activities from the gas phase and particulate phase were converted to the number of revertants per cubic meter of effluent (i.e. the mutagenic density) to compare the contributions of each of these phases to the total mutagenic activity for each strain. Under the experimental conditions of this study, the mutagenic density of the gas-phase component of the irradiated mixture contributed approximately two orders of magnitude more of the total TA100 activity than did the particulate phase. For TA98 the gas-phase component contributed approximately one order of magnitude more. However, caution must be exercised in extrapolating these results to urban atmospheres heavily impacted by automotive emissions, because the bacterial

46 CFR 52.25-20 - Exhaust gas boilers.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Exhaust gas boilers. 52.25-20 Section 52.25-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Other Boiler Types § 52.25-20 Exhaust gas boilers. Exhaust gas boilers with a maximum allowable working pressure...

Exhaust constituent emission factors of printed circuit board pyrolysis processes and its exhaust control

Energy Technology Data Exchange (ETDEWEB)

Chiang, Hung-Lung, E-mail: hlchiang@mail.cmu.edu.tw [Department of Health Risk Management, China Medical University, Taichung, Taiwan (China); Lin, Kuo-Hsiung [Department of Environmental Engineering and Science, Fooyin University, Kaohsiung, Taiwan (China)

2014-01-15

Highlights: • Recycling of waste printed circuit boards is an important issue. • Pyrolysis is an emerging technology for PCB treatment. • Emission factors of VOCs are determined for PCB pyrolysis exhaust. • Iron-Al{sub 2}O{sub 3} catalyst was employed for the exhaust control. -- Abstract: The printed circuit board (PCB) is an important part of electrical and electronic equipment, and its disposal and the recovery of useful materials from waste PCBs (WPCBs) are key issues for waste electrical and electronic equipment. Waste PCB compositions and their pyrolysis characteristics were analyzed in this study. In addition, the volatile organic compound (VOC) exhaust was controlled by an iron-impregnated alumina oxide catalyst. Results indicated that carbon and oxygen were the dominant components (hundreds mg/g) of the raw materials, and other elements such as nitrogen, bromine, and copper were several decades mg/g. Exhaust constituents of CO, H{sub 2}, CH{sub 4}, CO{sub 2}, and NOx, were 60–115, 0.4–4.0, 1.1–10, 30–95, and 0–0.7 mg/g, corresponding to temperatures ranging from 200 to 500 °C. When the pyrolysis temperature was lower than 300 °C, aromatics and paraffins were the major species, contributing 90% of ozone precursor VOCs, and an increase in the pyrolysis temperature corresponded to a decrease in the fraction of aromatic emission factors. Methanol, ethylacetate, acetone, dichloromethane, tetrachloromethane and acrylonitrile were the main species of oxygenated and chlorinated VOCs. The emission factors of some brominated compounds, i.e., bromoform, bromophenol, and dibromophenol, were higher at temperatures over 400 °C. When VOC exhaust was flowed through the bed of Fe-impregnated Al{sub 2}O{sub 3}, the emission of ozone precursor VOCs could be reduced by 70–80%.

Automotive exhaust gas conversion: from elementary step kinetics to prediction of emission dynamics

NARCIS (Netherlands)

Hoebink, J.H.B.J.; Harmsen, J.M.A.; Balenovic, M.; Backx, A.C.P.M.; Schouten, J.C.

2001-01-01

Elementary step based kinetics show a high added value to describe the performance of catalytic exhaust gas converters under dynamic conditions, as demonstrated with a Euro test cycle. Combination of such kinetic models for individual global reactions covers the mutual interactions via common

Quantification of vehicle fleet PM_1_0 particulate matter emission factors from exhaust and non-exhaust sources using tunnel measurement techniques

International Nuclear Information System (INIS)

Lawrence, Samantha; Sokhi, Ranjeet; Ravindra, Khaiwal

2016-01-01

Road tunnels act like large laboratories; they provide an excellent environment to quantify atmospheric particles emission factors from exhaust and non-exhaust sources due to their known boundary conditions. Current work compares the High Volume, Dichotomous Stacked Filter Unit and Partisol Air Sampler for coarse, PM_1_0 and PM_2_._5 particle concentration measurement and found that they do not differ significantly (p = 95%). PM_2_._5 fraction contributes 66% of PM_1_0 proportions and significantly influenced by traffic (turbulence) and meteorological conditions. Mass emission factors for PM_1_0 varies from 21.3 ± 1.9 to 28.8 ± 3.4 mg/vkm and composed of Motorcycle (0.0003–0.001 mg/vkm), Cars (26.1–33.4 mg/vkm), LDVs (2.4–3.0 mg/vkm), HDVs (2.2–2.8 mg/vkm) and Buses (0.1 mg/vkm). Based on Lawrence et al. (2013), source apportionment modelling, the PM_1_0 emission of brake wear (3.8–4.4 mg/vkm), petrol exhaust (3.9–4.5 mg/vkm), diesel exhaust (7.2–8.3 mg/vkm), re-suspension (9–10.4 mg/vkm), road surface wear (3.9–4.5 mg/vkm), and unexplained (7.2 mg/vkm) were also calculated. The current study determined that the combined non-exhaust fleet PM_1_0 emission factor (16.7–19.3 mg/vkm) are higher than the combined exhaust emission factor (11.1–12.8 mg/vkm). Thus, highlight the significance of non-exhaust emissions and the need for legislation and abatement strategies to reduce their contributions to ambient PM concentrations. - Highlights: • Calculations of exhaust/non-exhaust particulate emission factors using tunnel sampling and source apportionment techniques. • Non-exhaust emission dominates in the fine particle fraction, considered responsible for adverse human health impacts. • Emission factors for non-exhaust sources (e.g. tyre and brake) were calculated. • Fleet source PM_1_0 emission factor were also calculated, which can be used in dispersion modelling and health risk assessment. • Tukey mean

76 FR 31467 - Guide Concerning Fuel Economy Advertising for New Automobiles

Science.gov (United States)

2011-06-01

... the Fuel Economy Guide \\1\\ in 1975 to prevent deceptive fuel economy advertising for new automobiles... Economy Guide. That rulemaking will increase the coverage of EPA's new fuel economy labels to include... issue to new vehicle advertisers in the FTC's Fuel Economy Guide. Therefore, the Commission has...

Desulphurization of exhaust gases in chemical processes

Energy Technology Data Exchange (ETDEWEB)

Asperger, K.; Wischnewski, W.

1981-01-01

The sulfur content of exhaust gases can be reduced by: desulphurization of fuels; modification of processes; or treatment of resultant gases. In this paper a few selected examples from the chemical industry in the German Democratic Republic are presented. Using modified processes and treating the resultant gases, the sulphuric content of exhaust gases is effectively reduced. Methods to reduce the sulfur content of exhaust gases are described in the field of production of: sulphuric acid; viscose; fertilizers; and paraffin.

Engine with pulse-suppressed dedicated exhaust gas recirculation

Science.gov (United States)

Keating, Edward J.; Baker, Rodney E.

2016-06-07

An engine assembly includes an intake assembly, a spark-ignited internal combustion engine, and an exhaust assembly. The intake assembly includes a charge air cooler disposed between an exhaust gas recirculation (EGR) mixer and a backpressure valve. The charge air cooler has both an inlet and an outlet, and the back pressure valve is configured to maintain a minimum pressure difference between the inlet of the charge air cooler and an outlet of the backpressure valve. A dedicated exhaust gas recirculation system is provided in fluid communication with at least one cylinder and with the EGR mixer. The dedicated exhaust gas recirculation system is configured to route all of the exhaust gas from the at least one cylinder to the EGR mixer for recirculation back to the engine.

Premium Forecasting of an Insurance Company: Automobile Insurance

OpenAIRE

Fouladvand, M. Ebrahim; Darooneh, Amir H.

2002-01-01

We present an analytical study of an insurance company. We model the company's performance on a statistical basis and evaluate the predicted annual income of the company in terms of insurance parameters namely the premium, total number of the insured, average loss claims etc. We restrict ourselves to a single insurance class the so-called automobile insurance. We show the existence a crossover premium p_c below which the company is loss-making. Above p_c, we also give detailed statistical ana...

Loyalty marketing in automobile dealerships : case: car dealer X

OpenAIRE

Hyyryläinen, Heidi

2012-01-01

The purpose of this thesis is to study how customer loyalty is taken into account in automobile dealerships, what loyalty marketing means are used to improve customer loyalty, and what potential new loyalty marketing means can be implemented. The thesis is commissioned by Car dealer X. In the theoretical part, areas covered are customership and loyalty marketing. Customership includes customer satisfaction, customer loyalty, customer value and customer retention. Loyalty marketing contain...

Public health, autonomous automobiles, and the rush to market.

Science.gov (United States)

Kelley, Ben

2017-05-01

The USA has the worst motor vehicle safety problem among high-income countries and is pressing forward with the development of autonomous automobiles to address it. Government guidance and regulation, still inadequate, will be critical to the safety of the public. The analysis of this public health problem in the USA reveals the key factors that will determine the benefits and risks of autonomous vehicles around the world.

Exhaust system of an internal combustion engine

Energy Technology Data Exchange (ETDEWEB)

1974-09-04

A catalytic converter system for internal combustion engines is described that includes a means to maintain the catalyst temperature within a predetermined range for the efficient reduction of nitrogen oxides in the exhaust gas. Upstream of the catalytic converter, the exhaust pipe is encased in a structure such that a space is provided for the flow of a coolant around the exhaust pipe in response to the sensed catalytic temperature. A coolant control valve is actuated in response to the temperature sensor.

Study on the visibility of an electroluminescent display for automobiles; Jidoshayo EL display no shininsei

Energy Technology Data Exchange (ETDEWEB)

Matsumoto, N; Harada, M; Idogaki, T [Denso Corp., Aichi (Japan)

1997-10-01

This report explores the visibility of an Electroluminescent (EL) display for automotive use. Displays for automobiles are exposed to the direct rays of the sun and forced to operate in wide temperature range. Therefore, luminous flux density by the lighting on EL display panel and operating environment temperature must be considered for the visibility evaluation. Sensory evaluation on the visibility and physical measurements such as contrast, chromaticity difference in accordance with the viewing angle change indicate that the visibility of the EL display for automobiles is advantageous over other displays. 6 refs., 11 figs., 1 tab.

49 CFR 393.83 - Exhaust systems.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Exhaust systems. 393.83 Section 393.83... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.83 Exhaust systems. (a) Every motor... shall have a system to direct the discharge of such fumes. No part shall be located where its location...

Dedicated exhaust gas recirculation control systems and methods

Science.gov (United States)

Sczomak, David P.; Narayanaswamy, Kushal; Keating, Edward J.

2018-05-01

An engine control system of a vehicle includes a fuel control module that controls fuel injection of a first cylinder of an engine based on a first target air/fuel ratio that is fuel lean relative to a stoichiometric air/fuel ratio and that controls fuel injection of a second cylinder of the engine based on a second target air/fuel ratio that is fuel rich relative to stoichiometry. The first cylinder outputs exhaust to a first three way catalyst (TWC), and the second cylinder outputs exhaust to an exhaust gas recirculation (EGR) valve. An EGR control module controls opening of the EGR valve to: (i) a second TWC that reacts with nitrogen oxides (NOx) in the exhaust and outputs ammonia to a selective catalytic reduction (SCR) catalyst; and (ii) a conduit that recirculates exhaust back to an intake system of the engine.

Diesel Engine Exhaust: Basis for Occupational Exposure Limit Value.

Science.gov (United States)

Taxell, Piia; Santonen, Tiina

2017-08-01

Diesel engines are widely used in transport and power supply, making occupational exposure to diesel exhaust common. Both human and animal studies associate exposure to diesel exhaust with inflammatory lung effects, cardiovascular effects, and an increased risk of lung cancer. The International Agency for Research on Cancer has evaluated diesel exhaust as carcinogenic to humans. Yet national or regional limit values for controlling occupational exposure to diesel exhaust are rare. In recent decades, stricter emission regulations have led to diesel technologies evolving significantly, resulting in changes in exhaust emissions and composition. These changes are also expected to influence the health effects of diesel exhaust. This review provides an overview of the current knowledge on the health effects of diesel exhaust and the influence of new diesel technologies on the health risk. It discusses the relevant exposure indicators and perspectives for setting occupational exposure limit values for diesel exhaust, and outlines directions for future research. The review is based on a collaborative evaluation report by the Nordic Expert Group for Criteria Documentation of Health Risks from Chemicals and the Dutch Expert Committee on Occupational Safety. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

High-speed rail with emerging automobiles and aircraft can reduce environmental impacts in California’s future

International Nuclear Information System (INIS)

Chester, Mikhail; Horvath, Arpad

2012-01-01

Sustainable mobility policy for long-distance transportation services should consider emerging automobiles and aircraft as well as infrastructure and supply chain life-cycle effects in the assessment of new high-speed rail systems. Using the California corridor, future automobiles, high-speed rail and aircraft long-distance travel are evaluated, considering emerging fuel-efficient vehicles, new train designs and the possibility that the region will meet renewable electricity goals. An attributional per passenger-kilometer-traveled life-cycle inventory is first developed including vehicle, infrastructure and energy production components. A consequential life-cycle impact assessment is then established to evaluate existing infrastructure expansion against the construction of a new high-speed rail system. The results show that when using the life-cycle assessment framework, greenhouse gas footprints increase significantly and human health and environmental damage potentials may be dominated by indirect and supply chain components. The environmental payback is most sensitive to the number of automobile trips shifted to high-speed rail, and for greenhouse gases is likely to occur in 20–30 years. A high-speed rail system that is deployed with state-of-the-art trains, electricity that has met renewable goals, and in a configuration that endorses high ridership will provide significant environmental benefits over existing modes. Opportunities exist for reducing the long-distance transportation footprint by incentivizing large automobile trip shifts, meeting clean electricity goals and reducing material production effects. (letter)

Optimization of a parity of brake forces of automobiles in view of a bias of road

International Nuclear Information System (INIS)

Davlatshoev, R.A.; Tursunov, A.A.

2006-01-01

In clause it is shown a method optimization of brake of forces in view of a bias road it is established, that in mountain conditions of loss of coupling weight of automobiles than 2-3 times concerning flat conditions therma are more. The degree of use of coupling weight in result use of a regulator of brake forces very much increases also efficiency of brake systems such a kind of automobiles is provided with definition of optimum factor of coupling at which value of loss of coupling weight is provided minimal

The Swiss automobile industry - Situation, structure, trends, challenges and chances; Automobilindustrie Schweiz. Branchenanalyse 2008

Energy Technology Data Exchange (ETDEWEB)

Schulze, A.

2008-07-01

This paper presented at the Swiss 2008 research conference on traffic takes a look at the situation of the Swiss automobile industry in 2008. The results of the study are presented and include figures on the automobile industry, its history, structure, turn-over, employment and its position from the international point of view. Research and development in the sector, investments and challenges faced are discussed. The products and services offered are looked at and the relevant strategies examined. The sector's competitive environment and possibilities for growth are looked at and the advantages offered by strategic partnerships and geographical location are noted. Finally, interviews with important actors in the business are presented.

Efficient using of automobile transport for the deep open-pit mines

OpenAIRE

Dastan MAHAMBETOV; Bayan RAKISHEV; Galymzhan SAMENOV; Aleksander SŁADKOWSKI

2013-01-01

In the paper the method is proposed of substantiation of the major parameters for zones of effective use of automobile transport of different load-carrying capacity by open cast development of the deep deposits. An efficient ratio is determined between the mining and transport equipment by zone-to -zone use.

PTV VISSIM SIMULATION SOFTWARE USE FOR PROFESSIONALS IN «TRANSPORT TECHNOLOGIES» AND «AUTOMOBILE TRANSPORT» SPECIALTIES TRAINING

Directory of Open Access Journals (Sweden)

Volodymyr O. Sistuk

2016-05-01

Full Text Available The prospect of training quality improving of bachelors and masters in «Automobile transport» and «Transport technologies» specialties was considered, basing on the use of simulation software in the educational process. A review of the software products market was prepared, with the result of the component PTV VISSIM pre-selection. The simulation model of a real crossroad was developed to demonstrate its capabilities. Based on the analysis of application functions aptness to the city transport network complex objects simulation requirements, the expediency of the solution use during vocational certificate credit courses of students of Transport Faculty of Kryvyi Rih National University was grounded.

Dynamic interaction between markets for leasing and selling automobiles

OpenAIRE

Andrikopoulos, Athanasios; Markellos, Raphael N.

2015-01-01

We develop a model of dynamic interactions between price variations in leasing and selling markets for automobiles. Our framework assumes a differential game between multiple Bertrand-type competing firms which offer differentiated products to forward-looking agents. Empirical analysis of our model using monthly US data from 2002 to 2011 shows that variations in selling (cash) market prices lead rapidly dissipating changes of leasing market prices in the opposite direction. We discuss the pra...

Health effects of subchronic inhalation exposure to gasoline engine exhaust.

Science.gov (United States)

Reed, M D; Barrett, E G; Campen, M J; Divine, K K; Gigliotti, A P; McDonald, J D; Seagrave, J C; Mauderly, J L; Seilkop, S K; Swenberg, J A

2008-10-01

Gasoline engine emissions are a ubiquitous source of exposure to complex mixtures of particulate matter (PM) and non-PM pollutants; yet their health hazards have received little study in comparison with those of diesel emissions. As a component of the National Environmental Respiratory Center (NERC) multipollutant research program, F344 and SHR rats and A/J, C57BL/6, and BALBc mice were exposed 6 h/day, 7 days/week for 1 week to 6 months to exhaust from 1996 General Motors 4.3-L engines burning national average fuel on a simulated urban operating cycle. Exposure groups included whole exhaust diluted 1:10, 1:15, or 1:90, filtered exhaust at the 1:10 dilution, or clean air controls. Evaluations included organ weight, histopathology, hematology, serum chemistry, bronchoalveolar lavage, cardiac electrophysiology, micronuclei in circulating cells, DNA methylation and oxidative injury, clearance of Pseudomonas aeruginosa from the lung, and development of respiratory allergic responses to ovalbumin. Among the 120 outcome variables, only 20 demonstrated significant exposure effects. Several statistically significant effects appeared isolated and were not supported by related variables. The most coherent and consistent effects were those related to increased red blood cells, interpreted as likely to have resulted from exposure to 13-107 ppm carbon monoxide. Other effects supported by multiple variables included mild lung irritation and depression of oxidant production by alveolar macrophages. The lowest exposure level caused no significant effects. Because only 6 of the 20 significant effects appeared to be substantially reversed by PM filtration, the majority of effects were apparently caused by non-PM components of exhaust.

Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

NARCIS (Netherlands)

Ende, D.A. van den; Wiel, H.J. van de; Groen, W.A.; Zwaag, S. van der

2012-01-01

Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

Direct strain energy harvesting in automobile tires using piezoelectric PZT–polymer composites

NARCIS (Netherlands)

Van den Ende, D.A.; Van de Wiel, H.J.; Groen, W.A.; Van der Zwaag, S.

2011-01-01

Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

Oil prices, SUVs, and Iraq. An investigation of automobile manufacturer oil price sensitivity

Energy Technology Data Exchange (ETDEWEB)

Cameron, Ken [United States Navy (United States); Schnusenberg, Oliver [Department of Accounting and Finance, Coggin College of Business, The University of North Florida, 1 UNF Drive, Jacksonville, FL 32224 (United States)

2009-05-15

There has been much speculation about the recent upsurge in crude oil prices and the effect it will have on the economy and business. The objective of this paper is to investigate the relationship between oil prices and stock prices of automobile manufacturers. We add an oil price factor, measured alternatively by the excess change in WTI crude oil prices or the excess return on an energy ETF, to the Fama-French three-factor model over the period March 20, 2001 to September 30, 2008. Our dependent variable is the excess return on a price-weighted index of automobile manufacturers. Results indicate that oil prices add value to the pricing model, particularly for manufacturers specializing in SUVs and for a subperiod following the Iraq invasion on March 19, 2003. (author)

Investigating performance of microchannel evaporators for automobile air conditioning with different port structures

Directory of Open Access Journals (Sweden)

Guoliang Zhou

2017-08-01

Full Text Available Microchannel evaporator has been widely applied in automobile air conditioning, while it faces the problem of refrigerant maldistribution which deteriorates the thermal performance of evaporator. In this study, the performances of microchannel evaporators with different port structures are experimentally investigated for purpose of reducing evaporator pressure drop. Four evaporator samples with different port number and hydraulic diameter are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant R-134A at a real automobile air conditioning. The results on the variations of the evaporator pressure drop and evaporator surface temperature distribution are presented and analyzed. By studying the performance of an evaporator, seeking proper port structure is an approach to reduce refrigerant pressure drop as well as improve refrigerant distribution.

Integration of Bass Enhancement and Active Noise Control System in Automobile Cabin

Directory of Open Access Journals (Sweden)

Liang Wang

2008-01-01

Full Text Available With the advancement of digital signal processing technologies, consumers are more concerned with the quality of multimedia entertainment in automobiles. In order to meet this demand, an audio enhancement system is needed to improve bass reproduction and cancel engine noise in the cabins. This paper presents an integrated active noise control system that is based on frequency-sampling filters to track and extract the bass information from the audio signal, and a multifrequency active noise equalizer to tune the low-frequency engine harmonics to enhance the bass reproduction. In the noise cancellation mode, a maximum of 3 dB bass enhancement can be achieved with significant noise suppression, while higher bass enhancement can be achieved in the bass enhance mode. The results show that the proposed system is effective for solving both the bass audio reproduction and the noise control problems in automobile cabins.

Experiment and CFD simulation of exhaust tube in highvoltage circuit breaker

Directory of Open Access Journals (Sweden)

Ye Xiangyang

2018-01-01

Full Text Available In a high-voltage circuit breaker, the exhaust tube connects the arc zone with the exhaust volume. During the arc interruption process, the exhaust tube transports the hot gas from the arc interruption zone to the exhaust volume through its distributed holes. The design of a high performance exhaust tube in the circuit breaker development aims for well controlled hot gas evacuation mass flow and pressure waves. In this paper, the exhaust tube behaviour is investigated using Computational Fluid Dynamics (CFD. To verify the CFD simulation, a basic experimental study with pressure measurements at different positions of the exhaust tube is performed. Further, the design parameters influencing the exhaust tube behaviour and circuit breaker performance are investigated and discussed.

Capture of Heat Energy from Diesel Engine Exhaust

Energy Technology Data Exchange (ETDEWEB)

Chuen-Sen Lin

2008-12-31

Diesel generators produce waste heat as well as electrical power. About one-third of the fuel energy is released from the exhaust manifolds of the diesel engines and normally is not captured for useful applications. This project studied different waste heat applications that may effectively use the heat released from exhaust of Alaskan village diesel generators, selected the most desirable application, designed and fabricated a prototype for performance measurements, and evaluated the feasibility and economic impact of the selected application. Exhaust flow rate, composition, and temperature may affect the heat recovery system design and the amount of heat that is recoverable. In comparison with the other two parameters, the effect of exhaust composition may be less important due to the large air/fuel ratio for diesel engines. This project also compared heat content and qualities (i.e., temperatures) of exhaust for three types of fuel: conventional diesel, a synthetic diesel, and conventional diesel with a small amount of hydrogen. Another task of this project was the development of a computer-aided design tool for the economic analysis of selected exhaust heat recovery applications to any Alaskan village diesel generator set. The exhaust heat recovery application selected from this study was for heating. An exhaust heat recovery system was fabricated, and 350 hours of testing was conducted. Based on testing data, the exhaust heat recovery heating system showed insignificant effects on engine performance and maintenance requirements. From measurements, it was determined that the amount of heat recovered from the system was about 50% of the heat energy contained in the exhaust (heat contained in exhaust was evaluated based on environment temperature). The estimated payback time for 100% use of recovered heat would be less than 3 years at a fuel price of $3.50 per gallon, an interest rate of 10%, and an engine operation of 8 hours per day. Based on experimental data

Advanced Catalytic Converter in Gasoline Enginer Emission Control: A Review

OpenAIRE

Leman A.M.; Jajuli Afiqah; Feriyanto Dafit; Rahman Fakhrurrazi; Zakaria Supaat

2017-01-01

Exhaust emission from automobile source has become a major contributor to the air pollution and environmental problem. Catalytic converter is found to be one of the most effective tools to reduce the overwhelming exhaust pollutants in our environment. The development of sustainable catalytic converter still remains a critical issue due to the stringent exhaust emission regulations. Another issue such as price and availability of the precious metal were also forced the automotive industry to i...

The Effect of the Arab Boycott on Israel : The Automobile Market

NARCIS (Netherlands)

Fershtman, C.; Gandal, N.

1996-01-01

Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel.This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market.In this paper, we examine the

PRE-TREATMENT WITH DIESEL EXHAUST EXTRACT ALTERS INFLUENZA VIRUS REPLICATION IN LUNG EPITHELIAL CELLS

Science.gov (United States)

Diesel Exhaust (DE) has been demonstrated to generate inflammatory responses in the lung and modify immune responses to allergens. However, little is known about the effects of DE on common respiratory viral infections. We examined whether exposure to DE extracts (DEE) modifies i...

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

OpenAIRE

Sunil Luthra; Vinod Kumar; Sanjay Kumar; Abid Haleem

2011-01-01

Purpose: Green Supply Chain Management (GSCM) has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have ident...

Removing method for radon gas exhausted from nuclear fuel material

International Nuclear Information System (INIS)

Kato, Kenji.

1993-01-01

A centrifugal separator is disposed in the midway of an exhaustion pipe of a nuclear fuel handling facility, and exhausted gases are sent into a rotational cylinder of the separator. Radon gases in the midway of exhaustion are separated from the exhaustion gases by the centrifugal force of the separator and caused to stagnate at the periphery of the circumferential wall of the rotational cylinder. At the same time, the exhaustion gases having the radon gases separated therefrom are exhausted from the periphery of a rotational shaft of the rotational cylinder. Then, the radon gases stagnated in the rotational cylinder are decayed depending on the half-decay time. With such procedures, the radon gases can be removed continuously without discharging them to the outside. Further, it is preferred that an exhaustion blower or the like for putting the inside of the nuclear fuel handing facility to a negative pressure is disposed as in a conventional case. Further, a plurality of centrifugal separators may be disposed to exhaustion pipes, to remove radon gases in the exhaust gases by a multi stage way. Radon gases can be removed in a saved space with no requirement for exchange of adsorbents or temperature control. (T.M.)

Analysis of vehicle exhaust waste heat recovery potential using a Rankine cycle

International Nuclear Information System (INIS)

Domingues, António; Santos, Helder; Costa, Mário

2013-01-01

This study evaluates the vehicle exhaust WHR (waste heat recovery) potential using a RC (Rankine cycle ). To this end, both a RC thermodynamic model and a heat exchanger model have been developed. Both models use as input, experimental data obtained from a vehicle tested on a chassis dynamometer. The thermodynamic analysis was performed for water, R123 and R245fa and revealed the advantage of using water as the working fluid in applications of thermal recovery from exhaust gases of vehicles equipped with a spark-ignition engine. Moreover, the heat exchanger effectiveness for the organic working fluids R123 and R245fa is higher than that for the water and, consequently, they can also be considered appropriate for use in vehicle WHR applications through RCs when the exhaust gas temperatures are relatively low. For an ideal heat exchanger, the simulations revealed increases in the internal combustion engine thermal and vehicle mechanical efficiencies of 1.4%–3.52% and 10.16%–15.95%, respectively, while for a shell and tube heat exchanger, the simulations showed an increase of 0.85%–1.2% in the thermal efficiency and an increase of 2.64%–6.96% in the mechanical efficiency for an evaporating pressure of 2 MPa. The results confirm the advantages of using the thermal energy contained in the vehicle exhaust gases through RCs. Furthermore, the present analysis demonstrates that improved evaporator designs and appropriate expander devices allowing for higher evaporating pressures are required to obtain the maximum WHR potential from vehicle RC systems. -- Highlights: ► This study evaluates the vehicle exhaust waste heat recovery potential using Rankine cycle systems. ► A thermodynamic model and a heat exchanger model were developed. ► Experimental data obtained in a vehicle tested on a chassis dynamometer was used as models input. ► Thermodynamic analysis was performed for water, R123 and R245fa. ► Results confirm advantages of using the thermal energy

Engine with exhaust gas recirculation system and variable geometry turbocharger

Science.gov (United States)

Keating, Edward J.

2015-11-03

An engine assembly includes an intake assembly, an internal combustion engine defining a plurality of cylinders and configured to combust a fuel and produce exhaust gas, and an exhaust assembly in fluid communication with a first subset of the plurality of cylinders. Each of the plurality of cylinders are provided in fluid communication with the intake assembly. The exhaust assembly is provided in fluid communication with a first subset of the plurality of cylinders, and a dedicated exhaust gas recirculation system in fluid communication with both a second subset of the plurality of cylinders and with the intake assembly. The dedicated exhaust gas recirculation system is configured to route all of the exhaust gas from the second subset of the plurality of cylinders to the intake assembly. Finally, the engine assembly includes a turbocharger having a variable geometry turbine in fluid communication with the exhaust assembly.

Information, complexity and efficiency: The automobile model

Energy Technology Data Exchange (ETDEWEB)

Allenby, B. [Lucent Technologies (United States)]|[Lawrence Livermore National Lab., CA (United States)

1996-08-08

The new, rapidly evolving field of industrial ecology - the objective, multidisciplinary study of industrial and economic systems and their linkages with fundamental natural systems - provides strong ground for believing that a more environmentally and economically efficient economy will be more information intensive and complex. Information and intellectual capital will be substituted for the more traditional inputs of materials and energy in producing a desirable, yet sustainable, quality of life. While at this point this remains a strong hypothesis, the evolution of the automobile industry can be used to illustrate how such substitution may, in fact, already be occurring in an environmentally and economically critical sector.

Exhaust pressure pulsation observation from turbocharger instantaneous speed measurement

Science.gov (United States)

Macián, V.; Luján, J. M.; Bermúdez, V.; Guardiola, C.

2004-06-01

In internal combustion engines, instantaneous exhaust pressure measurements are difficult to perform in a production environment. The high temperature of the exhaust manifold and its pulsating character make its application to exhaust gas recirculation control algorithms impossible. In this paper an alternative method for estimating the exhaust pressure pulsation is presented. A numerical model is built which enables the exhaust pressure pulses to be predicted from instantaneous turbocharger speed measurements. Although the model is data based, a theoretical description of the process is also provided. This combined approach makes it possible to export the model for different engine operating points. Also, compressor contribution in the turbocharger speed pulsation is discussed extensively. The compressor contribution is initially neglected, and effects of this simplified approach are analysed.

V-TECS Guide for Automobile Air Conditioning and Electrical System Technician.

Science.gov (United States)

Meyer, Calvin F.; Benson, Robert T.

This curriculum guide provides an outline for an eight-unit course to train automobile air conditioning and electrical system technicians. Each unit focuses on a duty that is composed of a number of performance objectives. For each objective, these materials are provided: a task, a standard of performance of task, source of standard, conditions…

VISUALIZATION OF MEMS STRUCTURES FOR EDUCATION OF AUTOMOBILE MICROSYSTEMS

Directory of Open Access Journals (Sweden)

Slavomír KARDOŠ

2017-09-01

Full Text Available The work is aimed at visualization of working principles of microelectromechanical sensors which are used in automobile electronic systems. Attention is paid to accelerometric, inclinometric, pressure and MAF devices. These are used in systems for stability control, passive and active safety as well as comfort management. The visualizations were realized using modern animation techniques initiated by the creation of virtual materials, 2D and 3D objects, through scene exposure, pending their animation and final cutting.

Numerical calculation on infrared characteristics of the special vehicle exhaust system

Science.gov (United States)

Feng, Yun-song; Li, Xiao-xia; Jin, Wei

2017-10-01

For mastery of infrared radiation characteristics and flow field of the special vehicle exhaust system, first, a physical model of the special vehicle exhaust system is established with the Gambit, and the mathematical model of flow field is determined. Secondly, software Fluent6.3 is used to simulated the 3-D exterior flow field of the special vehicle exhaust system, and the datum of flow field, such as temperature, pressure and density, are obtained. Thirdly, based on the plume temperature, the special vehicle exhaust space is divided. The exhaust is equivalent to a gray-body. A calculating model of the vehicle exhaust infrared radiation is established, and the exhaust infrared radiation characteristics are calculated by the software MATLAB, then the spatial distribution curves are drawn. Finally, the numerical results are analyzing, and the basic laws of the special vehicle exhaust infrared radiation are explored. The results show that with the increase of the engine speed, the temperature of the exhaust pipe wall of the special vehicle increases, and the temperature and pressure of the exhaust gas flow field increase, which leads to the enhancement of the infrared radiation intensity

Power exhaust by impurity seeding in fusion reactors

Energy Technology Data Exchange (ETDEWEB)

Bernert, Matthias; Kallenbach, Arne; Dux, Ralph; Wischmeier, Marco [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Reimold, Felix [Forschungszentrum Juelich GmbH, IEK, Juelich (Germany); Lipschultz, Bruce [University of York, York Plasma Institute, Heslington, York (United Kingdom); Collaboration: the ASDEX Upgrade team; the EUROfusion MST1 Team

2016-07-01

Power exhaust is one of the big challenges for future fusion reactors. The power load at the divertor targets, the primary plasma-wall interaction zone, would exceed material limits and, thus, must be reduced. Therefore, 90% of the exhaust power needs to be dissipated and the divertor is anticipated to be in the detached regime, where the interaction of the plasma with the wall is significantly reduced. Radiation is the dominant dissipation process and is increased by impurity seeding. The radiation distribution can be tailored by using different seed impurities (N for radiation outside, Ne and Ar for radiation at the edge of and Kr for radiation inside the confined region). The tailoring of the radiation profile is required in order to maximize the radiated power and at the same time minimize the impact on the energy confinement. Recent experiments with intense impurity seeding at the ASDEX Upgrade tokamak demonstrate operation at highest heat fluxes and detached divertor targets at radiated power fractions of up to 90%. In these scenarios the radiation originates predominantly from the confined region and leads to an unexpectedly small confinement reduction.

TCV experiments towards the development of a plasma exhaust solution

Science.gov (United States)

Reimerdes, H.; Duval, B. P.; Harrison, J. R.; Labit, B.; Lipschultz, B.; Lunt, T.; Theiler, C.; Tsui, C. K.; Verhaegh, K.; Vijvers, W. A. J.; Boedo, J. A.; Calabro, G.; Crisanti, F.; Innocente, P.; Maurizio, R.; Pericoli, V.; Sheikh, U.; Spolare, M.; Vianello, N.; the TCV Team; the EUROfusion MST1 Team

2017-12-01

Research towards a plasma exhaust solution for a fusion power plant aims at validating edge physics models, strengthening predictive capabilities and improving the divertor configuration. The TCV tokamak is extensively used to investigate the extent that geometric configuration modifications can affect plasma exhaust performance. Recent TCV experiments continue previous detachment studies of Ohmically heated L-mode plasmas in standard single-null configurations, benefitting from a range of improved diagnostic capabilities. Studies were extended to nitrogen seeding and an entire suite of alternative magnetic configurations, including flux flaring towards the target (X divertor), increasing the outer target radius (Super-X) and movement of a secondary x-point inside the vessel (X-point target) as well as the entire range of snowflake configurations. Nitrogen seeding into a snowflake minus configuration demonstrated a regime with strong radiation in the large region between the two x-points, confirming EMC3-Eirene simulations, and opening a promising path towards highly radiating regimes with limited adverse effects on core performance.

Development of Proportional Pressure Control Valve for Hydraulic Braking Actuator of Automobile ABS

Directory of Open Access Journals (Sweden)

Che-Pin Chen

2018-04-01

Full Text Available This research developed a novel proportional pressure control valve for an automobile hydraulic braking actuator. It also analyzed and simulated solenoid force of the control valves, and the pressure relief capability test of electromagnetic thrust with the proportional valve body. Considering the high controllability and ease of production, the driver of this proportional valve was designed with a small volume and powerful solenoid force to control braking pressure and flow. Since the proportional valve can have closed-loop control, the proportional valve can replace a conventional solenoid valve in current brake actuators. With the proportional valve controlling braking and pressure relief mode, it can narrow the space of hydraulic braking actuator, and precisely control braking force to achieve safety objectives. Finally, the proposed novel proportional pressure control valve of an automobile hydraulic braking actuator was implemented and verified experimentally.

Electron beam treatment technology for exhaust gas for preventing acid rain

International Nuclear Information System (INIS)

Aoki, Shinji

1990-01-01

Recently, accompanying the increase of the use of fossil fuel, the damage due to acid rain such as withering of trees and extinction of fishes and shells has occurred worldwide, and it has become a serious problem. The sulfur oxides and nitrogen oxides contained in exhaust gas are oxidized by the action of sunbeam to become sulfuric acid and nitric acid mists, which fall in the form of rain. Acid rain is closely related to the use of the coal containing high sulfur, and it hinders the use of coal which is rich energy source. In order to simplify the processing system for boiler exhaust gas and to reduce waste water and wastes, Ebara Corp. developed the dry simultaneous desulfurizing and denitrating technology utilizing electron beam in cooperation with Japan Atomic Energy Research Institute. The flow chart of the system applied to the exhaust gas treatment in a coal-fired thermal power station is shown. The mechanism of desulfurization and denitration, and the features of this system are described. The demonstration plant was constructed in a coal-fired thermal power station in Indianapolis, Indiana, USA, and the trial operation was completed in July, 1987. The test results are reported. (K.I.)

Argon/UF6 plasma exhaust gas reconstitution experiments using preheated fluorine and on-line diagnostics. [fissioning uranium plasma core reactor design

Science.gov (United States)

Roman, W. C.

1979-01-01

The feasibility of employing a flowing, high-temperature, pure fluorine/UF6 regeneration system to efficiently convert a large fraction of the effluent plasma exhaust back to pure UF6 was demonstrated. The custom built T.O.F. mass spectrometer sampling system permitted on-line measurements of the UF6 concentration at different locations in the exhaust system. Negligible amounts ( 100 ppm) of UF6 were detected in the axial bypass exhaust duct and the exhaust ducts downstream of the cryogenic trap system used to collect the UF6, thus verifying the overall system efficiency over a range of operating conditions. Use of a porous Monel duct as part of the exhaust duct system, including provision for injection of pure fluorine, provided a viable technique to eliminate uranium compound residue on the inside surface of the exhaust ducts. Typical uranium compound mass deposition per unit area of duct was 2 micron g/sq cm. This porous duct technique is directly applicable to future uranium compound transfer exhaust systems. Throughout these experiments, additional basic data on the corrosion aspects of hot, pressurized UF6/fluorine were also accumulated.

Addressing Climate Change at the State and Local Level: Using Land Use Controls to Reduce Automobile Emissions

Directory of Open Access Journals (Sweden)

Rachel Medina

2010-06-01

Full Text Available Automobiles are a major source of CO2 emissions. Because there is no immediate technological fix to reduce these emissions, the most promising current strategy is to promote less automobile use. In the United States, this is difficult because federal programs such as the interstate highway system and local land use planning and regulation have encouraged suburban sprawl. In 2006, the state of California passed legislation to roll back greenhouse emissions to 1990 levels by 2020. This legislation did not link the roll back target with land use policies. However, NGOs and the state Attorney General used the state’s pre-existing environmental impact assessment act to sue a large county east of Los Angeles alleging that its revised land use plan was inconsistent with the 2006 legislation. The state and the county settled the suit after the county agreed to new greenhouse gas mitigation duties, and in 2008 California passed additional legislation to implement its 2006 statute. Communities are strongly encouraged to adopt compact, transit-oriented development strategies to limit automobile use. The new legislation gives the attorney general and NGOs additional legal authority to challenge local land use plans and regulatory decisions which fail to adopt these strategies. California’s important experiment has lessons for all urban areas struggling to reduce automobile CO2 emissions. It suggests that local land use controls can be added to the list of workable greenhouse gas mitigation strategies.

Demonstration of Novel Sampling Techniques for Measurement of Turbine Engine Volatile and Non-Volatile Particulate Matter (PM) Emissions

Science.gov (United States)

2015-12-30

emissions demonstration . 46 6 Figure 24. T63 engine with extension pipe to direct exhaust outside of the test cell for exhaust sampling with tip...to assess their effectiveness in conditioning turbine engine exhaust for total PM emissions measurements. Both were designed to promote the... effectively control and mitigate PM emissions. Aircraft PM is formed in the engine combustor due to incomplete combustion of fuel, and in the

Gravimetric Measurements of Filtering Facepiece Respirators Challenged With Diesel Exhaust.

Science.gov (United States)

Satish, Swathi; Swanson, Jacob J; Xiao, Kai; Viner, Andrew S; Kittelson, David B; Pui, David Y H

2017-07-01

Elevated concentrations of diesel exhaust have been linked to adverse health effects. Filtering facepiece respirators (FFRs) are widely used as a form of respiratory protection against diesel particulate matter (DPM) in occupational settings. Previous results (Penconek A, Drążyk P, Moskal A. (2013) Penetration of diesel exhaust particles through commercially available dust half masks. Ann Occup Hyg; 57: 360-73.) have suggested that common FFRs are less efficient than would be expected for this purpose based on their certification approvals. The objective of this study was to measure the penetration of DPM through NIOSH-certified R95 and P95 electret respirators to verify this result. Gravimetric-based penetration measurements conducted using polytetrafluoroethylene (PTFE) and polypropylene (PP) filters were compared with penetration measurements made with a Scanning Mobility Particle Sizer (SMPS, TSI Inc.), which measures the particle size distribution. Gravimetric measurements using PP filters were variable compared to SMPS measurements and biased high due to adsorption of gas phase organic material. Relatively inert PTFE filters adsorbed less gas phase organic material resulting in measurements that were more accurate. To attempt to correct for artifacts associated with adsorption of gas phase organic material, primary and secondary filters were used in series upstream and downstream of the FFR. Correcting for adsorption by subtracting the secondary mass from the primary mass improved the result for both PTFE and PP filters but this correction is subject to 'equilibrium' conditions that depend on sampling time and the concentration of particles and gas phase hydrocarbons. Overall, the results demonstrate that the use of filters to determine filtration efficiency of FFRs challenged with diesel exhaust produces erroneous results due to the presence of gas phase hydrocarbons in diesel exhaust and the tendency of filters to adsorb organic material. Published by

Fault tree analysis of Project S-4404, Upgrade Canyon Exhaust System

International Nuclear Information System (INIS)

Browne, E.V.; Low, J.M.; Lux, C.R.

1992-01-01

Project S-4404, Upgrade Canyon Exhaust Systems, is a $177 million project with the purpose of upgrading the Exhaust Systems for both F and H Canyon Facilities. This upgrade will replace major portions of the F and H-Canyon exhaust systems, downstream of their respective sand filters with higher capacity and more reliable systems. Because of the high cost, DOE requested Program Control ampersand Integration (PC ampersand I) to examine specific deletions to the project. PC ampersand I requested Nuclear Processes Safety Research (NPSR) to perform an analysis to compare failure rates for the existing F ampersand H Canyon exhaust systems with the proposed exhaust system and specific proposed exhaust system alternatives. The objective of this work was to perform an analysis and compare failure rates for the existing F ampersand H Canyon exhaust systems with the proposed project exhaust system and proposed project alternatives. Based on fault tree analysis, two conclusions are made. First, D ampersand D activities can be eliminated from the project with no significant decrease to exhaust system safety. Deletion of D ampersand D activities would result in a cost savings of $29 million. Second, deletion of DOE Order 6430.1A requirements regarding DBAs would decrease exhaust system safety by a factor of 12

Effect of cooling the recirculated exhaust gases on diesel engine emissions

International Nuclear Information System (INIS)

Abu-Hamdeh, Nidal H.

2003-01-01

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Spiral fin exhaust pipes were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The gases examined in this study were oxides of nitrogen (NO x ), carbon dioxide (CO 2 ) and carbon monoxide (CO). In addition, O 2 concentration in the exhaust was measured. The two designs adopted in this study were exhaust pipes with solid and hollow fins around them. The first type uses air flow around the fins to cool the exhaust gases. The second type consists of hollow fins around the exhaust pipe to allow cooling water to flow in the hollow passage. Different combinations and arrangements of the solid and hollow fins exhaust pipes were used. It was found that decreasing the temperature of the EGR resulted in reductions in the oxides of nitrogen (NO x ) and carbon dioxide (CO 2 ) but increased the carbon monoxide (CO) in the exhaust gases. In addition, the oxygen (O 2 ) concentration in the exhaust was decreased. As a general trend, the percentages of reduction in the NO x gas concentrations were lower than the percentages of increase in the CO emissions as a result of cooling the EGR of a Diesel engine by a heat exchanger. Using water as a cooling medium decreased the exhaust gases temperature and the amount of pollutants more than did air as a cooling medium. In a separate series of tests, increasing the cooled EGR ratios decreased the exhaust NO x but increased the particulate matter concentrations in the exhaust gases

Effect of cooling the recirculated exhaust gases on diesel engine emissions

Energy Technology Data Exchange (ETDEWEB)

Abu-Hamdeh, Nidal H. [Jordan Univ. of Science and Technology, Irbid (Jordan)

2003-11-01

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Spiral fin exhaust pipes were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The gases examined in this study were oxides of nitrogen (NO{sub x}), carbon dioxide (CO{sub 2}) and carbon monoxide (CO). In addition, O{sub 2} concentration in the exhaust was measured. The two designs adopted in this study were exhaust pipes with solid and hollow fins around them. The first type uses air flow around the fins to cool the exhaust gases. The second type consists of hollow fins around the exhaust pipe to allow cooling water to flow in the hollow passage. Different combinations and arrangements of the solid and hollow fins exhaust pipes were used. It was found that decreasing the temperature of the EGR resulted in reductions in the oxides of nitrogen (NO{sub x}) and carbon dioxide (CO{sub 2}) but increased the carbon monoxide (CO) in the exhaust gases. In addition, the oxygen (O{sub 2}) concentration in the exhaust was decreased. As a general trend, the percentages of reduction in the NO{sub x} gas concentrations were lower than the percentages of increase in the CO emissions as a result of cooling the EGR of a Diesel engine by a heat exchanger. Using water as a cooling medium decreased the exhaust gases temperature and the amount of pollutants more than did air as a cooling medium. In a separate series of tests, increasing the cooled EGR ratios decreased the exhaust NO{sub x} but increased the particulate matter concentrations in the exhaust gases. (Author)

Success of Saturn: A Case Study of the Saturn Automobile

Science.gov (United States)

1993-04-01

speed in production with nearly 20,000 cars per month coming off the assembly line.133 MARKETING THE PRODUCT ADVERTISING STRATEGY Saturn’s approach to...Satisfaction Index.𔄁 5 In the Sales Satisfaction category Saturn finished sixth behind Lexus, Cadillac, Infiniti, Lincoln and Mercedes Benz , all...quality, inexpensive, fuel efficient automobiles. They put their cars on the market in the U.S. and Americans bought Japanese instead of expensive

The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

Directory of Open Access Journals (Sweden)

linhua Pang

2015-01-01

Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

In-house Integration Model in the Indian Automobile Industry

OpenAIRE

Tachiki, Dennis S.

2012-01-01

　Since the mid―1980s, Indian automobile companies have been upgrading their technological knowhow to competitively respond to an increasing demand for higher value-added components from domestic and global assemblers. According to the Automotive Component Manufacturers Association of India (ACMA), the auto component market in India should grow at a CARG (compounded annual growth rate) of 11.7 per cent between 2011 and 2015, and the export market at a robust CARG of 18 per cent between 2011 a...

Acceptance test procedure for SY Tank Farm replacement exhauster unit

Energy Technology Data Exchange (ETDEWEB)

Becken, G.W.

1994-12-16

The proper functioning of a new 241-SY Tank Farm replacement exhauster will be acceptance tested, to establish operability and to provide an operational baseline for the equipment. During this test, a verification of all of the alarm and control circuits associated with the exhaust, which provide operating controls and/or signals to local and remote alarm/annunciator panels, shall be performed. Test signals for sensors that provide alarms, warnings, and/or interlocks will be applied to verify that alarm, warning, and interlock setpoints are correct. Alarm and warning lights, controls, and local and remote readouts for the exhauster will be verified to be adequate for proper operation of the exhauster. Testing per this procedure shall be conducted in two phases. The first phase of testing, to verify alarm, warning, and interlock setpoints primarily, will be performed in the MO-566 Fab Shop. The second phase of testing, to verify proper operation and acceptable interface with other tank farm systems, will be conducted after the exhauster and all associated support and monitoring equipment have been installed in the SY Tank Farm. The exhauster, which is mounted on a skid and which will eventually be located in the SY tank farm, receives input signals from a variety of sensors mounted on the skid and associated equipment. These sensors provide information such as: exhauster system inlet vacuum pressure; prefilter and HEPA filter differential pressures; exhaust stack sampler status; exhaust fan status; system status (running/shut down); and radiation monitoring systems status. The output of these sensors is transmitted to the exhauster annunciator panel where the signals are displayed and monitored for out-of-specification conditions.

How did the Global Financial Crisis Influence the Automobile Industry: Comparison between the US and Japanese Auto Industry

OpenAIRE

SUN, YAN

2013-01-01

The 2008 global financial crisis was the worst one in seventy-five years and had great negative impact on the economy worldwide. Automobile industry, the pillar to the economic development, was hit most by the recession among the sectors. The purpose of this study is to analyze the financial crisis impacts on the automobile industry and find out strategies to decrease the occurrence rate and the loss if a similar crisis occurs. The study, firstly, describes the impact of financial crisis...

Three-dimensional approach to exhaust gas energy analysis

Science.gov (United States)

Sekavčnik, M.; Ogorevc, T.; Katrašnik, T.; Rodman-Oprešnik, S.

2012-06-01

Presented work is based on an extensive CFD simulation of the exhaust stroke of a single-cylinder four-stroke internal combustion engine with the exhaust manifold attached. Since the dynamics of the exhaust flow are extremely 3D, an innovative approach to calculate the local entropy generation is developed and implemented in the discussed 3D numerical model. It allows temporal and spatial determination of critical regions and periods of entropy generation in the process with objective to reduce it.

Non-exhaust PM emissions from electric vehicles

Science.gov (United States)

Timmers, Victor R. J. H.; Achten, Peter A. J.

2016-06-01

Particulate matter (PM) exposure has been linked to adverse health effects by numerous studies. Therefore, governments have been heavily incentivising the market to switch to electric passenger cars in order to reduce air pollution. However, this literature review suggests that electric vehicles may not reduce levels of PM as much as expected, because of their relatively high weight. By analysing the existing literature on non-exhaust emissions of different vehicle categories, this review found that there is a positive relationship between weight and non-exhaust PM emission factors. In addition, electric vehicles (EVs) were found to be 24% heavier than equivalent internal combustion engine vehicles (ICEVs). As a result, total PM10 emissions from EVs were found to be equal to those of modern ICEVs. PM2.5 emissions were only 1-3% lower for EVs compared to modern ICEVs. Therefore, it could be concluded that the increased popularity of electric vehicles will likely not have a great effect on PM levels. Non-exhaust emissions already account for over 90% of PM10 and 85% of PM2.5 emissions from traffic. These proportions will continue to increase as exhaust standards improve and average vehicle weight increases. Future policy should consequently focus on setting standards for non-exhaust emissions and encouraging weight reduction of all vehicles to significantly reduce PM emissions from traffic.

Malaria drives T cells to exhaustion

Directory of Open Access Journals (Sweden)

Michelle N Wykes

2014-05-01

Full Text Available Malaria is a significant global burden but after >30 years of effort there is no vaccine on the market. While the complex life cycle of the parasite presents several challenges, many years of research have also identified several mechanisms of immune evasion by Plasmodium spp.. Recent research on malaria, has investigated the Programmed cell death-1 (PD-1 pathway which mediates exhaustion of T cells, characterized by poor effector functions and recall responses and in some cases loss of the cells by apoptosis. Such studies have shown exhaustion of CD4+ T cells and an unappreciated role for CD8+ T cells in promoting sterile immunity against blood stage malaria. This is because PD-1 mediates up to a 95% reduction in numbers and functional capacity of parasite-specific CD8+ T cells, thus masking their role in protection. The role of T cell exhaustion during malaria provides an explanation for the absence of sterile immunity following the clearance of acute disease which will be relevant to future malaria-vaccine design and suggests the need for novel therapeutic solutions. This review will thus examine the role of PD-1-mediated T cell exhaustion in preventing lasting immunity against malaria.

EU-project AEROJET. Non-intrusive measurements of aircraft engine exhaust emissions

Energy Technology Data Exchange (ETDEWEB)

Schaefer, K.; Heland, J. [Fraunhofer-Inst. fuer Atmosphaerische Umweltforschung (IFU), Garmisch-Partenkirchen (Germany); Burrows, R. [Rolls-Royce Ltd. (United Kingdom). Engine Support Lab.; Bernard, M. [AUXITROL, S.A. (France). Aerospace Equipment Div.; Bishop, G. [British Aerospace (United Kingdom). Sowerby Research Centre; Lindermeir, E. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e. V. (DLR), Bonn (Germany). Inst. fuer Optoelektronik; Lister, D.H. [Defence and Research Agency, Hants (United Kingdom). Propulsion and Development Dept.; Wiesen, P. [Bergische Univ. Wuppertal (Gesamthochshule) (Germany); Hilton, M. [University of Reading (United Kingdom). Dept. of Physics

1997-12-31

The main goal of the AEROJET programme is to demonstrate the equivalence of remote measurement techniques to conventional extractive methods for both gaseous and particulate measurements. The different remote measurement techniques are compared and calibrated. A demonstrator measurement system for exhaust gases, temperature and particulates including data-analysis software is regarded as result of this project. Non-intrusive measurements are the method of choice within the AEROJET project promising to avoid the disadvantages of the gas sampling techniques which are currently used. Different ground based non-intrusive measurement methods are demonstrated during a final evaluation phase. Several non-intrusive techniques are compared with conventional gas sampling and analysis techniques. (R.P.) 3 refs.

EU-project AEROJET. Non-intrusive measurements of aircraft engine exhaust emissions

Energy Technology Data Exchange (ETDEWEB)

Schaefer, K; Heland, J [Fraunhofer-Inst. fuer Atmosphaerische Umweltforschung (IFU), Garmisch-Partenkirchen (Germany); Burrows, R [Rolls-Royce Ltd. (United Kingdom). Engine Support Lab.; Bernard, M [AUXITROL, S.A. (France). Aerospace Equipment Div.; Bishop, G [British Aerospace (United Kingdom). Sowerby Research Centre; Lindermeir, E [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e. V. (DLR), Bonn (Germany). Inst. fuer Optoelektronik; Lister, D H [Defence and Research Agency, Hants (United Kingdom). Propulsion and Development Dept.; Wiesen, P [Bergische Univ. Wuppertal (Gesamthochshule) (Germany); Hilton, M [University of Reading (United Kingdom). Dept. of Physics

1998-12-31

The main goal of the AEROJET programme is to demonstrate the equivalence of remote measurement techniques to conventional extractive methods for both gaseous and particulate measurements. The different remote measurement techniques are compared and calibrated. A demonstrator measurement system for exhaust gases, temperature and particulates including data-analysis software is regarded as result of this project. Non-intrusive measurements are the method of choice within the AEROJET project promising to avoid the disadvantages of the gas sampling techniques which are currently used. Different ground based non-intrusive measurement methods are demonstrated during a final evaluation phase. Several non-intrusive techniques are compared with conventional gas sampling and analysis techniques. (R.P.) 3 refs.

30 CFR 36.25 - Engine exhaust system.

Science.gov (United States)

2010-07-01

... (see § 36.23(b)(2)). (3) In lieu of a space-place flame arrester, an exhaust-gas cooling box or... exhaust system for convenient, temporary attachment of a pressure gage at a point suitable for measuring the total back pressure in the system. The connection also shall be suitable for temporary attachment...

Automobiles and global warming: Alternative fuels and other options for carbon dioxide emissions reduction

International Nuclear Information System (INIS)

Sagar, A.D.

1995-01-01

Automobiles are a source of considerable pollution at the global level, including a significant fraction of the total greenhouse gas emissions. Alternative fuels have received some attention as potential options to curtail the carbon dioxide emissions from motor vehicles. This article discusses the feasibility and desirability (from a technical as well as a broader environmental perspective) of the large-scale production and use of alternative fuels as a strategy to mitigate automotive carbon dioxide emissions. Other options such as improving vehicle efficiency and switching to more efficient modes of passenger transportation are also discussed. These latter options offer an effective and immediate way to tackle the greenhouse and other pollutant emission from automobiles, especially as the limitations of currently available alternative fuels and the technological and other constraints for potential future alternatives are revealed

Measuring the environmental impacts and sustainability of automobiles

Energy Technology Data Exchange (ETDEWEB)

Lave, L B; Cobas Flores, E; McMichael, F C; Hendrickson, C T; Horvath, A; Joshi, S [Carnegie Mellon Univ., Pittsburgh, PA (United States)

1996-11-01

In the paper the following topics are discussed: - the need for public education and involvement in the decision process, - the difficulty of defining sustainability, - the occasional difference between the goals of sustainability and environmental quality, - the need for life cycle analysis to analyze the sustainability and environmental quality implications of a product, process, or material. The importance of environmental input-output analysis is stressed. This new tool can provide the life cycle information cheaply, quickly, and with much less uncertainty. Examples are presented for making an automobile, a seat out of plastic or aluminium, and an electric vehicle. (author) 4 tabs., refs.

Psychosocial work environment and emotional exhaustion among middle-aged employees

Directory of Open Access Journals (Sweden)

Saastamoinen Peppiina

2011-04-01

Full Text Available Abstract Background This study examined the associations of job control, organizational justice and bullying at the workplace with emotional exhaustion. This was done by adjusting firstly for age and occupational class, secondly physical work factors, thirdly mutually adjusting for the three psychosocial factors and fourthly adjusting for all studied variables simultaneously. Data were derived from the Helsinki Health Study baseline surveys conducted in 2001 and 2002, including 40-60-year-old employees of the City of Helsinki (n = 5819, response rate 66%. Exhaustion was measured with a six-item subscale from Maslach Burnout Inventory (MBI. Psychosocial factors included Karasek's job control, organizational justice and bullying at the workplace. Logistic regression analysis was used. Results Among women 23% and among men 20% reported symptoms of emotional exhaustion. Among women all psychosocial factors were associated with exhaustion when adjusted for age and occupational class as confounders. When physical work factors were additionally adjusted for, the associations slightly attenuated but remained. When psychosocial work factors were simultaneously adjusted for each other, their associations with exhaustion attenuated but remained. Among men all psychosocial factors were associated with exhaustion when adjusted for confounders only. When adjusted for physical work factors the associations slightly attenuated. When psychosocial factors were simultaneously adjusted for each other, associations of organizational justice and bullying with exhaustion attenuated but remained whereas job control lost its association. Conclusions Identifying risk factors for emotional exhaustion is vital for preventing subsequent processes leading to burnout. Psychosocial factors are likely to contribute to exhaustion among female as well as male employees. Thus management and occupational health care should devote more attention to the psychosocial work environment

Levels of polybrominated diphenyl ethers (PBDEs) in dust from personal automobiles in conjunction with studies on the photochemical degradation of decabromodiphenyl ether (BDE-209).

Science.gov (United States)

Lagalante, Anthony F; Shedden, Courtney S; Greenbacker, Peter W

2011-07-01

The levels of 21 PBDE congeners were detemined in the dust sampled from 66 personal automobiles. The dominant congener in automobile dust was BDE-209 with a median level of 8.12 μg g⁻¹. Personal vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE and DecaBDE commercial formulations. Levels of PBDEs in personal automobiles are generally reduced in comparison to our previously reported levels in resale vehicles on dealership lots presumably due to a dilution effect introduced by dust or debris that does not originate from the vehicle. Laboratory photochemical studies were conducted on both automobile dust collected from personal vehicles as well as BDE-209 adsorbed to sodium sulfate. No significant degradation occurred in the personal vehicle dust after 56 days of constant UVA irradiation while significant degradation did occur with BDE-209 adsorbed to sodium sulfate. PBDEs from the degradation of BDE-209 were identified and potential degradation pathways elucidated. Human exposure potential to PBDEs from automobile dust ingestion remains a serious concern in the U.S. population. Copyright © 2011 Elsevier Ltd. All rights reserved.

Design basis and requirements for 241-SY modular exhauster mechanical installation

International Nuclear Information System (INIS)

Kriskovich, J.R.

1994-01-01

A new ventilation system is being installed to serve as the K-1 primary exhauster. The existing K-1 primary exhauster will then become the backup. This ventilation system services waste tanks 241-SY-101, 102 and 103. The nominal flow rate through the ventilation system is 1,000 cfm. The new ventilation system will contain a moisture eliminator, a heater, a prefilter, two stages of HEPA filtration, an exhaust fan, a stack and stack sampling system. The purpose of this document is to serve as the design and functional requirements for the mechanical installation of the new 241-SY modular exhauster. The mechanical installation will include modifying the existing ductwork (i.e., installing a ''T'' to connect the new exhauster to the existing system), modifying the existing condensate drain lines to accommodate the new lines associated with the new exhauster, a maintenance platform near the stack of the new exhauster, guy wires and guy wire footings to support the stack of the new exhauster, as well as other miscellaneous tasks associated with the mechanical installation design effort

Exhaust gas recirculation in a homogeneous charge compression ignition engine

Science.gov (United States)

Duffy, Kevin P [Metamora, IL; Kieser, Andrew J [Morton, IL; Rodman, Anthony [Chillicothe, IL; Liechty, Michael P [Chillicothe, IL; Hergart, Carl-Anders [Peoria, IL; Hardy, William L [Peoria, IL

2008-05-27

A homogeneous charge compression ignition engine operates by injecting liquid fuel directly in a combustion chamber, and mixing the fuel with recirculated exhaust and fresh air through an auto ignition condition of the fuel. The engine includes at least one turbocharger for extracting energy from the engine exhaust and using that energy to boost intake pressure of recirculated exhaust gas and fresh air. Elevated proportions of exhaust gas recirculated to the engine are attained by throttling the fresh air inlet supply. These elevated exhaust gas recirculation rates allow the HCCI engine to be operated at higher speeds and loads rendering the HCCI engine a more viable alternative to a conventional diesel engine.

Muscle interstitial potassium kinetics during intense exhaustive exercise

DEFF Research Database (Denmark)

Nordsborg, Nikolai; Mohr, Magni; Pedersen, Lasse Dannemann

2003-01-01

Interstitial K+ ([K+]i) was measured in human skeletal muscle by microdialysis during exhaustive leg exercise, with (AL) and without (L) previous intense arm exercise. In addition, the reproducibility of the [K+]i determinations was examined. Possible microdialysis-induced rupture of the sarcolemma...... was assessed by measurement of carnosine in the dialysate, because carnosine is only expected to be found intracellularly. Changes in [K+]i could be reproduced, when exhaustive leg exercise was performed on two different days, with a between-day difference of approximately 0.5 mM at rest and 1.5 m......M at exhaustion. The time to exhaustion was shorter in AL than in L (2.7 +/- 0.3 vs. 4.0 +/- 0.3 min; P exercise period in AL compared with L (9.2 +/- 0.7 vs. 6.4 +/- 0.9 mM; P

Effect of EGR on the exhaust gas temperature and exhaust opacity ...

Indian Academy of Sciences (India)

In diesel engines, NOx formation is a highly temperature-dependent phenomenon and takes place when the temperature in the combustion chamber exceeds 2000 K. Therefore, in order to reduce NOx emissions in the exhaust, it is necessary to keep peak combustion temperatures under control. One simple way of ...

High-speed schlieren imaging of rocket exhaust plumes

Science.gov (United States)

Coultas-McKenney, Caralyn; Winter, Kyle; Hargather, Michael

2016-11-01

Experiments are conducted to examine the exhaust of a variety of rocket engines. The rocket engines are mounted in a schlieren system to allow high-speed imaging of the engine exhaust during startup, steady state, and shutdown. A variety of rocket engines are explored including a research-scale liquid rocket engine, consumer/amateur solid rocket motors, and water bottle rockets. Comparisons of the exhaust characteristics, thrust and cost for this range of rockets is presented. The variety of nozzle designs, target functions, and propellant type provides unique variations in the schlieren imaging.

Baking exhaustion device in thermonuclear device

Energy Technology Data Exchange (ETDEWEB)

Kondo, Mitsunori.

1987-02-02

Purpose: To rapidly remove tritium and impurity from the vacuum region in the access port of the baking exhaustion device in a thermonuclear device. Constitution: Each of the gaps at the boundary between a fixed shielding member and a blanket module and at the boundary between the blanket and a divertor is made extremely small so as to minimize the neutron streaming from plasmas. Accordingly, in the case of evacuating the vacuum region in the access port, the gap conductance is extremely poor and the exhaustion speed is low. Then, baking pipeways for flowing high temperature fluids are embedded to the surface layer at the position facing to the vacuum region and the plasma evacuation duct and the vacuum region are connected with an evacuation duct of the access port. By flowing high temperature fluids in the pipeways and conducting evacuation, baking exhaustion can be carried out rapidly. (Kamimura, M.).

Estimation of exposed radiation dose in radiography of the chest. Mainly on the dose at health examination on automobiles

International Nuclear Information System (INIS)

Suzuki, Shoichi; Oda, Akiko; Ohkura, Masaki

1998-01-01

The exposure doses in radiography and photofluorography of the chest at health examination on automobiles were estimated and compared with those using other hospital equipments. The tube voltage, effective energy and half value layer under ordinary conditions for radiography and fluorography were measured by KYOKKO model 100 X-ray analyzer and output pulse shape was confirmed by the fluorometer (TOREKEY-1001 C). The dose at the body surface was measured by the ionization chambers (VICTOREEN RADCON 500 and 30-330) which had been equipped in the WAC chest phantom (JIS Z 4915, Kyoto Kagaku). Nine automobiles of 3 facilities were used, of which X-ray generating apparatuses of either condenser or inverter type were manufactured by Hitachi (5 machines), Toshiba (1) and Shimadzu (3). The examined apparatuses not for the automobile were Toshiba-20 and Hitachi SIRIUS-100 portable ones and Hitachi DH-1520 TM high-voltage one. The effective energy was found dependent on the tube voltage (100-130 kV) and X-ray generating system (35.1-54.37 keV in the condenser type and 41.1-43.9 keV in the inverter type). Pulse shape analysis revealed that the pulse height and area under the pulse height-time curve were larger in the inverter system. The mean doses in photofluorography and radiography on automobiles were 0.525 and 0.297 mGy, respectively. The mean dose of 0.61 mGy in radiography at home with the portable apparatus was the highest even when compared with that of 0.525 mGy for fluorography on the automobile. Thus, the inverter system on the car can guarantee the level of 0.4 mGy defined by IAEA guideline (Safety series No. 115, 1996). (K.H.)

Engineering task plan for five portable exhausters

International Nuclear Information System (INIS)

Rensink, G.E.

1997-01-01

Exhausters will be employed to ventilate certain single-shell tanks (SSTs) during salt well pumping campaigns. Active ventilation is necessary to reduce the potential flammable gas inventory (LANL 1996a) in the dome space that may accumulate during steady-state conditions or during/after postulated episodic gas release events. The tanks described in this plan support the activities required to fabricate and test three 500 cfm portable exhausters in the 200 W area shops, and to procure, design, fabricate and test two 1000 cfm units. Appropriate Notice of Construction (NOC) radiological and toxic air pollutant permits will be obtained for the portable exhausters. The portable exhauster design media to be employed to support this task was previously developed for the 241-A-101 exhauster. The same design as A101 will be fabricated with only minor improvements to the design based upon operator input/lessons learned. The safety authorization basis for this program effort will follow SAD 36 (LANL 1996b), and each tank will be reviewed against this SAD for changes or updates. The 1000 cfm units will be designed by the selected offsite contractor according to the specification requirements in KHC-S-O490. The offsite units have been specified to utilize as many of the same components as the 500 cfm units to ensure a more cost effective operation and maintenance through the reduction of spare parts and additional procedures

The Effect of Condensing Steam Turbine Exhaust Hood Body Geometry on Exhaust Performance Efficiency

Science.gov (United States)

Gribin, V. G.; Paramonov, A. N.; Mitrokhova, O. M.

2018-06-01

The article presents data from combined numerical and experimental investigations of the effect that the overall dimensions of the exhaust hood of a steam turbine with an underslung condenser has on the aerodynamic losses in the hood. Owing to the properly selected minimum permissible overall dimensions of the exhaust hood, more efficient operation of this turbine component is achieved, better vibration stability of the turbine set shaft line is obtained, and lower costs are required for arranging the steam turbine plant in the turbine building. Experiments have shown that the main overall dimensions of the hood body have a determining effect on the exhaust hood flow path profile and on its aerodynamic performance. Owing to properly selected ratios between the exhaust hood body main sizes without a diffuser, a total loss coefficient equal to approximately unity has been obtained. By using an axial-radial diffuser, the energy loss can be decreased by 30-40% depending on the geometrical parameters and level of velocities in the inlet section of a hood having the optimal overall dimensions. By using the obtained results, it becomes possible to evaluate the overall dimensions necessary for achieving the maximal aerodynamic hood efficiency and, as a consequence, to obtain better technical and economic indicators of the turbine plant as a whole already at the initial stage of its designing. If a need arises to select overall dimensions smaller than their optimal values, the increase of energy loss can be estimated using the presented dependences. The cycle of investigations was carried out on the experimental setups available in the fundamental research laboratory of the Moscow Power Engineering Institute National University's Department of Steam and Gas Turbines with due regard to the operating parameters and similarity criteria.

Life cycle models of conventional and alternative-fueled automobiles

Science.gov (United States)

Maclean, Heather Louise

This thesis reports life cycle inventories of internal combustion engine automobiles with feasible near term fuel/engine combinations. These combinations include unleaded gasoline, California Phase 2 Reformulated Gasoline, alcohol and gasoline blends (85 percent methanol or ethanol combined with 15 percent gasoline), and compressed natural gas in spark ignition direct and indirect injection engines. Additionally, I consider neat methanol and neat ethanol in spark ignition direct injection engines and diesel fuel in compression ignition direct and indirect injection engines. I investigate the potential of the above options to have a lower environmental impact than conventional gasoline-fueled automobiles, while still retaining comparable pricing and consumer benefits. More broadly, the objective is to assess whether the use of any of the alternative systems will help to lead to the goal of a more sustainable personal transportation system. The principal tool is the Economic Input-Output Life Cycle Analysis model which includes inventories of economic data, environmental discharges, and resource use. I develop a life cycle assessment framework to assemble the array of data generated by the model into three aggregate assessment parameters; economics, externalities, and vehicle attributes. The first step is to develop a set of 'comparable cars' with the alternative fuel/engine combinations, based on characteristics of a conventional 1998 gasoline-fueled Ford Taurus sedan, the baseline vehicle for the analyses. I calculate the assessment parameters assuming that these comparable cars can attain the potential thermal efficiencies estimated by experts for each fuel/engine combination. To a first approximation, there are no significant differences in the assessment parameters for the vehicle manufacture, service, fixed costs, and the end-of-life for any of the options. However, there are differences in the vehicle operation life cycle components and the state of technology

Biomonitoring of N-ethyl-2-pyrrolidone in automobile varnishers.

Science.gov (United States)

Koslitz, Stephan; Meier, Swetlana; Schindler, Birgit Karin; Weiss, Tobias; Koch, Holger Martin; Brüning, Thomas; Käfferlein, Heiko Udo

2014-12-01

N-alkyl-2-pyrrolidones are important organic solvents for varnishes in industry. This study investigates exposure to N-ethyl-2-pyrrolidone (NEP) in varnishing of hard plastic components in an automobile plant. Two specific biomarkers of exposure, 5-hydroxy-N-ethyl-2-pyrrolidone (5-HNEP) and 2-hydroxy-N-ethylsuccinimide (2-HESI), were analyzed in urine samples of 14 workers. For this purpose, pre-shift, post-shift and next day pre-shift urine samples were collected midweek. Twelve workers performed regular work tasks (loading, wiping and packing), whereas two workers performed special work tasks including cleaning the sprayer system with organic solvents containing N-alkyl-2-pyrrolidones. Spot urine samples of nine non-exposed persons of the same plant served as controls. Median post-shift urinary levels of workers with regular work tasks (5-HNEP: 0.15 mg/L; 2-HESI: 0.19 mg/L) were ∼5-fold higher compared to the controls (0.03 mg/L each). Continuously increasing metabolite levels, from pre-shift via post-shift to pre-shift samples of the following day, were observed in particular for the two workers with the special working tasks. Maximum levels were 31.01 mg/L (5-HNEP) and 8.45 mg/L (2-HESI). No clear trend was evident for workers with regular working tasks. In summary, we were able to show that workers can be exposed to NEP during varnishing tasks in the automobile industry. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Decreasing the exhaust outlet temperatures on a class III bus with the lowest impact on the exhaust backpressure and the fuel consumption

Science.gov (United States)

Aslan, E.; Ozturk, Y.; Dileroglu, S.

2017-07-01

The focus of this study is to determine the most appropriate exhaust tail pipe form among three different type of designs with respect to their temperature loss efficiency for a 9.5m intercity bus equipped with an Euro VI diesel engine and an automated transmission. To provide lower temperatures at the exhaust outlet, mentioned designs were submitted on to a CFD simulation using Ansys Fluent 17.1, while for manufactured products, temperature measurement tests were conducted in an environmental chamber with Omega K-type thermocouples, and Flir T420 thermal camera was used to monitor outer surface temperature distributions to make a comparison between theoretical and practical results. In order to obtain these practical results, actual tests were performed in an environmental chamber with a constant ambient temperature during the vehicle exhaust emission system regeneration process. In conclusion, an exhaust tail pipe design with a diffuser having a circular contraction and expansion forms is designated since it was the most optimized option in terms of temperature loss efficiency, inconsiderable exhaust backpressure increase and manufacturing costs.

Dissolution kinetics of Pd and Pt from automobile catalysts by naturally occurring complexing agents

Czech Academy of Sciences Publication Activity Database

Šebek, O.; Mihaljevič, M.; Strnad, L.; Ettler, V.; Ježek, J.; Štědrý, R.; Drahota, P.; Ackerman, Lukáš; Adamec, V.

2011-01-01

Roč. 198, December (2011), s. 331-339 ISSN 0304-3894 Institutional research plan: CEZ:AV0Z30130516 Keywords : automobile catalyst * Platinum group elements * mobilisation * leaching * kinetic Subject RIV: DD - Geochemistry Impact factor: 4.173, year: 2011

Passion for work and emotional exhaustion: the mediating role of rumination and recovery.

Science.gov (United States)

Donahue, Eric G; Forest, Jacques; Vallerand, Robert J; Lemyre, Pierre-Nicolas; Crevier-Braud, Laurence; Bergeron, Eliane

2012-11-01

The purpose of the present research is to present a model pertaining to the mediating roles of rumination and recovery experiences in the relationship between a harmonious and an obsessive passion (Vallerand et al., 2003) for work and workers' emotional exhaustion. Two populations were measured in the present research: namely elite coaches and nurses. Study 1's model posits that obsessive passion positively predicts rumination about one's work when being physically away from work, while harmonious passion negatively predicts ruminative thoughts. In turn, rumination is expected to positively contribute to emotional exhaustion. The results of Study 1 were replicated in Study 2. In addition, in the model of Study 2, obsessive passion was expected to undermine recovery experiences, while harmonious passion was expected to predict recovery experiences. In turn, recovery experiences were expected to protect workers from emotional exhaustion. Results of both studies provided support for the proposed model. The present findings demonstrate that passion for work may lead to some adaptive and maladaptive psychological processes depending on the type of passion that is prevalent. © 2012 The Authors. Applied Psychology: Health and Well-Being © 2012 The International Association of Applied Psychology.

Exhaustive Exercise-induced Oxidative Stress Alteration of Erythrocyte Oxygen Release Capacity.

Science.gov (United States)

Xiong, Yanlian; Xiong, Yanlei; Wang, Yueming; Zhao, Yajin; Li, Yaojin; Ren, Yang; Wang, Ruofeng; Zhao, Mingzi; Hao, Yitong; Liu, Haibei; Wang, Xiang

2018-05-24

The aim of the present study is to explore the effect of exhaustive running exercise (ERE) in the oxygen release capacity of rat erythrocytes. Rats were divided into sedentary control (C), moderate running exercise (MRE) and exhaustive running exercise groups. The thermodynamics and kinetics properties of the erythrocyte oxygen release process of different groups were tested. We also determined the degree of band-3 oxidative and phosphorylation, anion transport activity and carbonic anhydrase isoform II(CAII) activity. Biochemical studies suggested that exhaustive running significantly increased oxidative injury parameters in TBARS and methaemoglobin levels. Furthermore, exhaustive running significantly decreased anion transport activity and carbonic anhydrase isoform II(CAII) activity. Thermodynamic analysis indicated that erythrocytes oxygen release ability also significantly increased due to elevated 2,3-DPG level after exhaustive running. Kinetic analysis indicated that exhaustive running resulted in significantly decreased T50 value. We presented evidence that exhaustive running remarkably impacted thermodynamics and kinetics properties of RBCs oxygen release. In addition, changes in 2,3-DPG levels and band-3 oxidation and phosphorylation could be the driving force for exhaustive running induced alterations in erythrocytes oxygen release thermodynamics and kinetics properties.

Ratio analysis and Piotroski scoring system in the automobile industry in Croatia

Directory of Open Access Journals (Sweden)

Morana Mesarić

2014-10-01

Full Text Available To gain insight into operational efficiency, sustainable profitability, the ability to fulfil commitments, use of funds borrowed or investment risk or operational self-sufficiency, it is necessary to conduct analyses of financial statements usually known as ratio analysis. The paper provides analyses of five Croatian general distributors of the automobile industry. Ratios used in the analyses are those used in the Piotroski f-scoring analyses, which are famous for assessing financial capacities of enterprises on the stock exchange market. Based on ratios used in Piotroski scoring systems the assessment of five enterprises, as well as the sector as a whole was carried out. The analysis covers the period 2007-2012. That is the period of the rise, falling and recovery of the automotive industry throughout the world as well as the rise, falling and recession of the whole economy including the automobile market. In general, the sector itself is financially unstable and consequently risk exposed. Results are used for preliminary analyses and prediction of the future financial strength of the auto industry in Croatia.

Creating a One-Stop-Shop for Automobile Solutions in Kolkata, India.

OpenAIRE

Kanoria, Shrivardhan

2009-01-01

This is a research lead business plan concerning making a one-stop-shop for automobile solutions in Kolkata, India, containing three elements of business. Firstly, it would involve restoration, buying and selling of vintage and classic cars. Secondly, it would contain modern car customisation. Thirdly, it would contain modern car servicing, buying and selling. These would be the core activities, having associates non core businesses as well.

Effect of nocturnal exhaustion exercise on the metabolism of selected elements

Directory of Open Access Journals (Sweden)

Patlar Suleyman

2014-01-01

Full Text Available The present study aims to examine how exercise performed until fatigue at night affects element distribution in the serum. The study examined 10 healthy sedentary males who were not actively engaged in any particular sport and whose mean age was 23.00±0.25 years, mean height 177.79±2.25 cm, and mean weight 70.70±1.63 kg. Blood samples were collected from the subjects at midnight twice: during rest before exercise and after exercise. Serum phosphorus, sodium, potassium, sulfur (mmol/L, cobalt, boron, cadmium, chrome, nickel, manganese, molybdenum, copper, iron, zinc and calcium levels (mg/L were measured using atomic emission spectroscopy (ICP-AES. Exhaustion exercise performed at night brought about a decrease in copper levels only (p<0.05, while elevating levels of potassium, sodium, magnesium, calcium, iron, zinc, manganese, nickel, selenium, molybdenum, chrome, cobalt, lead and cadmium (p<0.05. The results of the study demonstrate that nighttime exercise until exhaustion significantly alters element metabolism.

Effects of particle exhaust on neutral compression ratios in DIII-D

International Nuclear Information System (INIS)

Colchin, R.J.; Maingi, R.; Wade, M.R.; Allen, S.L.; Greenfield, C.M.

1998-08-01

In this paper, neutral particles in DIII-D are studied via their compression in the plenum and via particle exhaust. The compression of gas in the plena is examined in terms of the magnetic field configuration and wall conditions. DIII-D compression ratios are observed in the range from 1 to ≥ 1,000. Particle control ultimately depends on the exhaust of neutrals via plenum or wall pumping. Wall pumping or outgassing is calculated by means of a detailed particle balance throughout individual discharges, and its effect on particle control is discussed. It is demonstrated that particle control through wall conditioning leads to lower normalized densities. A two-region model shows that the gas compression ratio (C div = divertor plenum neutral pressure/torus neutral pressure) can be interpreted in relation to gas flows in the torus and divertor including the pumping speed of the plenum cryopumps, plasma pumping, and the pumping or outgassing of the walls

Elements and polycyclic aromatic hydrocarbons in exhaust particles emitted by light-duty vehicles.

Science.gov (United States)

Alves, Célia A; Barbosa, Cátia; Rocha, Sónia; Calvo, Ana; Nunes, Teresa; Cerqueira, Mário; Pio, Casimiro; Karanasiou, Angeliki; Querol, Xavier

2015-08-01

The main purpose of this work was to evaluate the chemical composition of particulate matter (PM) emitted by eight different light-duty vehicles. Exhaust samples from petrol and diesel cars (Euro 3 to Euro 5) were collected in a chassis dynamometer facility. To simulate the real-world driving conditions, three ARTEMIS cycles were followed: road, to simulate a fluid traffic flow and urban with hot and cold starts, to simulate driving conditions in cities. Samples were analysed for the water-soluble ions, for the elemental composition and for polycyclic aromatic hydrocarbons (PAHs), respectively, by ion chromatography, inductively coupled plasma atomic emission spectroscopy (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and gas chromatography-mass spectrometry (GC-MS). Nitrate and phosphate were the major water-soluble ions in the exhaust particles emitted from diesel and petrol vehicles, respectively. The amount of material emitted is affected by the vehicle age. For vehicles ≥Euro 4, most elements were below the detection limits. Sodium, with emission factors in the ranges 23.5-62.4 and 78.2-227μg km(-1), for petrol and diesel Euro 3 vehicles, respectively, was the major element. The emission factors of metallic elements indicated that diesel vehicles release three to five times more than petrol automobiles. Element emissions under urban cycles are higher than those found for on-road driving, being three or four times higher, for petrol vehicles, and two or three times, for diesel vehicles. The difference between cycles is mainly due to the high emissions for the urban cycle with hot start-up. As registered for elements, most of the PAH emissions for vehicles ≥Euro 4 were also below the detection limits. Regardless of the vehicle models or driving cycles, the two- to four-ring PAHs were always dominant. Naphthalene, with emission factors up to 925 μg km(-1), was always the most abundant PAH. The relative cancer risk associated with

Measurements of ion concentration in gasoline and diesel engine exhaust

Science.gov (United States)

Yu, Fangqun; Lanni, Thomas; Frank, Brian P.

The nanoparticles formed in motor vehicle exhaust have received increasing attention due to their potential adverse health effects. It has been recently proposed that combustion-generated ions may play a critical role in the formation of these volatile nanoparticles. In this paper, we design an experiment to measure the total ion concentration in motor vehicle engine exhaust, and report some preliminary measurements in the exhaust of a gasoline engine (K-car) and a diesel engine (diesel generator). Under the experimental set-up reported in this study and for the specific engines used, the total ion concentration is ca. 3.3×10 6 cm -3 with almost all of the ions smaller than 3 nm in the gasoline engine exhaust, and is above 2.7×10 8 cm -3 with most of the ions larger than 3 nm in the diesel engine exhaust. This difference in the measured ion properties is interpreted as a result of the different residence times of exhaust inside the tailpipe/connecting pipe and the different concentrations of soot particles in the exhaust. The measured ion concentrations appear to be within the ranges predicted by a theoretical model describing the evolution of ions inside a pipe.

Teamwork in the Automobile Industry Ð An Anglo-German Comparison

OpenAIRE

Niels-Erik Wergin

2003-01-01

Teamwork in the automotive industry varies significantly from plant to plant. This article compares teamwork in four automobile plants in Germany and Britain, and addresses two questions: (1) Do different models of teamwork fit into a bi-polar model of teamwork, being either innovative or structural conservative? (2) Do current models of teamwork signify a development towards post-fordism, or are they merely part of a neo-fordist rationalisation of production? The following answers are sugges...

Automobile inspection system based on wireless communication

Science.gov (United States)

Miao, Changyun; Ye, Chunqing

2010-07-01

This paper aims to research the Automobile Inspection System based on Wireless Communication, and suggests an overall design scheme which uses GPS for speed detection and Bluetooth and GPRS for communication. The communication between PDA and PC was realized by means of GPRS and TCP/IP; and the hardware circuit and software for detection terminal were devised by means of JINOU-3264 Bluetooth Module after analyzing the Bluetooth and its communication protocol. According to the results of debugging test, this system accomplished GPRS based data communication and management as well as the real-time detection on auto safety performance parameters in crash test via PC, whereby the need for mobility and reliability was met and the efficiency and level of detection was improved.

Employability and Technical Skill Required to Establish a Small Scale Automobile Workshop

Science.gov (United States)

Olaitan, Olawale O.; Ikeh, Joshua O.

2015-01-01

The study focused on identifying the employability and technical skills needed to establish small-scale automobile workshop in Nsukka Urban of Enugu State. Five purposes of the study were stated to guide the study. Five research questions were stated and answered in line with the purpose of the study. The population for the study is 1,500…

Exhaustible-resource theory and the uranium market

International Nuclear Information System (INIS)

Hsieh, Y.L.

1982-01-01

Exhaustible-resource theory has been developed rapidly by economists since the OPEC shocks of 1973-1974 and the theory now provides a framework for analyzing the optimal production pattern for resource commodities. However, applications of the theory to particular markets, such as crude oil, have not provided accurate predictions due no doubt to theoretical problems in explaining exploration and discovery events, market organization changes, and uncertainty. This thesis investigated the uranium market in an effort to determine how well the exhaustible-resource theory explains the past price and quantity time paths of this energy resource, and what might be expected in the future. The exhaustible-resource theory was first developed in a form appropriate to an application to the uranium market. An econometric simulation model that combines the history of uranium price formation and the exhaustible-resource theory was developed to forecast future uranium prices. The model was designed not only to reflect the physical processes of drilling activities, changing reserves, production, and prices of uranium through individual equations, but also to account for the interaction of all these interrelationships at the same time

Exhaust gas treatment by electron beam irradiation

International Nuclear Information System (INIS)

Shibamura, Yokichi; Suda, Shoichi; Kobayashi, Toshiki

1991-01-01

Among global environmental problems, atmospheric pollution has been discussed since relatively old days, and various countermeasures have been taken, but recently in connection with acid rain, the efficient and economical treatment technology is demanded. As the denitration and desulfurization technology for the exhaust gas from the combustion of fossil fuel, the incineration of city trash and internal combustion engines, three is the treatment method by electron beam irradiation. By irradiating electron beam to exhaust gas, nitrogen oxides and sulfur oxides are oxidized to nitric acid and sulfuric acid, and by promoting the neutralization of these acids with injected alkali, harmless salts are recovered. This method has the merit that nitrogen oxides and surfur oxides can be removed efficiently with a single system. In this report, as for the exhaust gas treatment by electron beam irradiation, its principle, features, and the present status of research and development are described, and in particular, the research on the recent exhaust gas treatment in city trash incineration is introduced. This treatment method is a dry process, accordingly, waste water disposal is unnecessary. The reaction products are utilized as fertilizer, and waste is not produced. (K.I.)

Module discovery by exhaustive search for densely connected, co-expressed regions in biomolecular interaction networks.

Directory of Open Access Journals (Sweden)

Recep Colak

2010-10-01

Full Text Available Computational prediction of functionally related groups of genes (functional modules from large-scale data is an important issue in computational biology. Gene expression experiments and interaction networks are well studied large-scale data sources, available for many not yet exhaustively annotated organisms. It has been well established, when analyzing these two data sources jointly, modules are often reflected by highly interconnected (dense regions in the interaction networks whose participating genes are co-expressed. However, the tractability of the problem had remained unclear and methods by which to exhaustively search for such constellations had not been presented.We provide an algorithmic framework, referred to as Densely Connected Biclustering (DECOB, by which the aforementioned search problem becomes tractable. To benchmark the predictive power inherent to the approach, we computed all co-expressed, dense regions in physical protein and genetic interaction networks from human and yeast. An automatized filtering procedure reduces our output which results in smaller collections of modules, comparable to state-of-the-art approaches. Our results performed favorably in a fair benchmarking competition which adheres to standard criteria. We demonstrate the usefulness of an exhaustive module search, by using the unreduced output to more quickly perform GO term related function prediction tasks. We point out the advantages of our exhaustive output by predicting functional relationships using two examples.We demonstrate that the computation of all densely connected and co-expressed regions in interaction networks is an approach to module discovery of considerable value. Beyond confirming the well settled hypothesis that such co-expressed, densely connected interaction network regions reflect functional modules, we open up novel computational ways to comprehensively analyze the modular organization of an organism based on prevalent and largely

Module discovery by exhaustive search for densely connected, co-expressed regions in biomolecular interaction networks.

Science.gov (United States)

Colak, Recep; Moser, Flavia; Chu, Jeffrey Shih-Chieh; Schönhuth, Alexander; Chen, Nansheng; Ester, Martin

2010-10-25

Computational prediction of functionally related groups of genes (functional modules) from large-scale data is an important issue in computational biology. Gene expression experiments and interaction networks are well studied large-scale data sources, available for many not yet exhaustively annotated organisms. It has been well established, when analyzing these two data sources jointly, modules are often reflected by highly interconnected (dense) regions in the interaction networks whose participating genes are co-expressed. However, the tractability of the problem had remained unclear and methods by which to exhaustively search for such constellations had not been presented. We provide an algorithmic framework, referred to as Densely Connected Biclustering (DECOB), by which the aforementioned search problem becomes tractable. To benchmark the predictive power inherent to the approach, we computed all co-expressed, dense regions in physical protein and genetic interaction networks from human and yeast. An automatized filtering procedure reduces our output which results in smaller collections of modules, comparable to state-of-the-art approaches. Our results performed favorably in a fair benchmarking competition which adheres to standard criteria. We demonstrate the usefulness of an exhaustive module search, by using the unreduced output to more quickly perform GO term related function prediction tasks. We point out the advantages of our exhaustive output by predicting functional relationships using two examples. We demonstrate that the computation of all densely connected and co-expressed regions in interaction networks is an approach to module discovery of considerable value. Beyond confirming the well settled hypothesis that such co-expressed, densely connected interaction network regions reflect functional modules, we open up novel computational ways to comprehensively analyze the modular organization of an organism based on prevalent and largely available large

REVIEW ARTICLE: MODELLING AND ANALYSIS OF A GASOLINE ENGINE EXHAUST GAS SYSTEMS

OpenAIRE

Barhm Mohamad

2018-01-01

The engine exhaust gas behaviour is strongly influencing the engine performance. This paper presents the modelling and analysis of four stroke - gasoline engine exhaust gas systems. An automotive example is considered whereby the pulsating exhausts gas flow through an exhaust pipe and silencer are considered over a wide range of speeds. Analytical procedures are outlined enabling the general analysis and modelling of vehicle engine exhaust gas systems also in this paper present...

75 FR 72965 - Federal Travel Regulation; Removal of Privately Owned Vehicle Rates; Privately Owned Automobile...

Science.gov (United States)

2010-11-29

... rate based on the type of POV you actually use (privately owned airplane, privately owned automobile... HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) 0 29. The authority citation for 41...

DETECTION RELEVANCY OF SOME FACTORS INFLUENCING ON AIR POLLUTION FROM AUTOMOBILE AND ROAD COMPLEX

Directory of Open Access Journals (Sweden)

Radkevich, M.

2013-01-01

Full Text Available The dependence between the pavement evenness and the emissions of air pollutants from automobile – road sector is detected. It is proposed to take the pavement evenness for the assessment criterion of greenhouse and other gases emissions.

Diesel engine exhaust particulate filter with intake throttling incineration control

Energy Technology Data Exchange (ETDEWEB)

Ludecke, O.; Rosebrock, T.

1980-07-08

A description is given of a diesel engine exhaust filter and particulate incineration system in combination with a diesel engine having a normally unthrottled air induction system for admitting combustion air to the engine and an exhaust system for carrying off spent combustion products exhausted from the engine, said filter and incineration system comprising: a combustion resistant filter disposed in the exhaust system and operative to collect and retain portions of the largely carbonaceous particulate matter contained in the engine exhaust products, said fiber being capable of withstanding without substantial damage internal temperatures sufficient to burn the collected particulate matter, a throttle in the indication system and operable to restrict air flow into the engine to reduce the admittance of excess combustion air and thereby increase engine exhaust gas temperature, and means to actuate said throttle periodically during engine operation to an air flow restricting burn mode capable of raising the particulates in said filter to their combustion temperature under certain engine operating conditions and to maintain said throttle mode for an interval adequate to burn retained particulates in the filter.

Surface chloride salt formation on Space Shuttle exhaust alumina

Science.gov (United States)

Cofer, W. R., III; Pellett, G. L.; Sebacher, D. I.; Wakelyn, N. T.

1984-01-01

Aluminum oxide samples from the exhaust of Space Shuttle launches STS-1, STS-4, STS-5, and STS-6 were collected from surfaces on or around the launch pad complex and chemically analyzed. The results indicate that the particulate solid-propellant rocket motor (SRM) alumina was heavily chlorided. Concentrations of water-soluble aluminum (III) ion were large, suggesting that the surface of the SRM alumina particles was rendered soluble by prior reactions with HCl and H2O in the SRM exhaust cloud. These results suggest that Space Shuttle exhaust alumina particles are good sites for nucleation and condensation of atmospheric water. Laboratory experiments conducted at 220 C suggest that partial surface chloriding of alumina may occur in hot Space Shuttle exhaust plumes.

Exhaust gas purifying system for an internal combustion engine

Energy Technology Data Exchange (ETDEWEB)

Minami, H; Saito, Z

1976-10-07

The exhaust gas purification system is a so-called three-way catalytic converter. It consists of an oxidation converter, a reduction converter, or a thermal converter. An exhaust sensor made up of an oxygen sensor, a carbon sensor, a carbon monoxide sensor, hydrocarbon sensor, or a nitrogen peroxide sensor, tests the composition of the exhaust and controls the air-fuel feed system in dependence of the exhaust mixture in such a manner that in the intake system an air-fuel mixture is taken in which the stoichiometric air-fuel relation is produced. Moreover, a thermostatically controlled air intake device is built into the fuel injection system which supplies the air of the fuel injection system with a relatively consistent temperature.

Emotional exhaustion may trigger cut in working hours

NARCIS (Netherlands)

Koppes, L.

2012-01-01

Researchers in the Netherlands have been examining to what extent workers are modifying their hours to cope with high levels of work-related emotional exhaustion. Findings reveal that most full-time employees would prefer a cut in their hours, with those reporting emotional exhaustion wanting a

Automobile dependence in cities: An international comparison of urban transport and land use patterns with implications for sustainability

International Nuclear Information System (INIS)

Kenworthy, J.R.; Laube, F.B.

1996-01-01

Cities around the world are subject to increasing levels of environmental impact from dependence on the automobile. In the highly auto-dependent cities of the US and Australia, this is manifested in problems such as urban sprawl and its destruction of prime farming land and natural landscapes, photochemical smog that can be primarily attributed to auto emissions. On top of the more local impacts of the automobile, the global dimension should not be forgotten. Perhaps the two most pressing issues in this regard are the oil problem and the greenhouse problem. A comparison of global cities over the period 1980 to 1990 reveals large differences in automobile dependence with implications for the future sustainability of cities in different countries. This study explores some of the underlying land use, transport, and economic reasons for these different transport patterns. It briefly reviews what the sustainability agenda means for transport and land use patterns in cities and suggests a suite of targets or goals for sustainability by which cities might measure their current directions and plans

A Lagrangian Simulation of Subsonic Aircraft Exhaust Emissions

Science.gov (United States)

Schoeberl, M. R.; Morris, G. A.

1999-01-01

To estimate the effect of subsonic and supersonic aircraft exhaust on the stratospheric concentration of NO(y), we employ a trajectory model initialized with air parcels based on the standard release scenarios. The supersonic exhaust simulations are in good agreement with 2D and 3D model results and show a perturbation of about 1-2 ppbv of NO(y) in the stratosphere. The subsonic simulations show that subsonic emissions are almost entirely trapped below the 380 K potential temperature surface. Our subsonic results contradict results from most other models, which show exhaust products penetrating above 380 K, as summarized. The disagreement can likely be attributed to an excessive vertical diffusion in most models of the strong vertical gradient in NO(y) that forms at the boundary between the emission zone and the stratosphere above 380 K. Our results suggest that previous assessments of the impact of subsonic exhaust emission on the stratospheric region above 380 K should be considered to be an upper bound.

Hydrogen combustion and exhaust emissions in a supercharged gas engine ignited with micro pilot diesel fuel

Energy Technology Data Exchange (ETDEWEB)

Tomita, E.; Kawahara, N. [Okayama Univ., Okayama (Japan); Roy, M.M. [Rajshahi Univ. of Engineering and Technology, Rajshahi (Bangladesh)

2009-07-01

A hydrogen combustion and exhaust emissions in a supercharged gas engine ignited with micro pilot diesel fuel was discussed in this presentation. A schematic diagram of the experimental study was first presented. The single cylinder, water-cooled, supercharged test engine was illustrated. Results were presented for the following: fuel energy and energy share (hydrogen and diesel fuel); pressure history and rate of heat release; engine performance and exhaust emissions; effect of nitrogen dilution on heat value per cycle; effect of N{sub 2} dilution on pressure history and rate of heat release; and engine performance and exhaust emissions. This presentation demonstrated that smooth and knock-free engine operation results from the use of hydrogen in a supercharged dual-fuel engine for leaner fuel-air equivalence ratios maintaining high thermal efficiency. It was possible to attain mor3 than 90 per cent hydrogen-energy substitution to the diesel fuel with zero smoke emissions. figs.

Hydrogen combustion and exhaust emissions in a supercharged gas engine ignited with micro pilot diesel fuel

International Nuclear Information System (INIS)

Tomita, E.; Kawahara, N.; Roy, M.M.

2009-01-01

A hydrogen combustion and exhaust emissions in a supercharged gas engine ignited with micro pilot diesel fuel was discussed in this presentation. A schematic diagram of the experimental study was first presented. The single cylinder, water-cooled, supercharged test engine was illustrated. Results were presented for the following: fuel energy and energy share (hydrogen and diesel fuel); pressure history and rate of heat release; engine performance and exhaust emissions; effect of nitrogen dilution on heat value per cycle; effect of N 2 dilution on pressure history and rate of heat release; and engine performance and exhaust emissions. This presentation demonstrated that smooth and knock-free engine operation results from the use of hydrogen in a supercharged dual-fuel engine for leaner fuel-air equivalence ratios maintaining high thermal efficiency. It was possible to attain mor3 than 90 per cent hydrogen-energy substitution to the diesel fuel with zero smoke emissions. figs.

Talking about the Automobile Braking System

Science.gov (United States)

Xu, Zhiqiang

2017-12-01

With the continuous progress of society, the continuous development of the times, people’s living standards continue to improve, people continue to improve the pursuit. With the rapid development of automobile manufacturing, the car will be all over the tens of thousands of households, the increase in car traffic, a direct result of the incidence of traffic accidents. Brake system is the guarantee of the safety of the car, its technical condition is good or bad, directly affect the operational safety and transportation efficiency, so the brake system is absolutely reliable. The requirements of the car on the braking system is to have a certain braking force to ensure reliable work in all cases, light and flexible operation. Normal braking should be good performance, in addition to a foot sensitive, the emergency brake four rounds can not be too long, not partial, not ring.

49 CFR 229.43 - Exhaust and battery gases.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Exhaust and battery gases. 229.43 Section 229.43... § 229.43 Exhaust and battery gases. (a) Products of combustion shall be released entirely outside the... conditions. (b) Battery containers shall be vented and batteries kept from gassing excessively. ...

40 CFR 86.1342-90 - Calculations; exhaust emissions.

Science.gov (United States)

2010-07-01

... exhaust sample in sampling solution, µg/ml. (vii) VAE = Volume of sampling solution for dilute exhaust... sampling solution, µg/ml. (xiii) VAA = Volume of sampling solution for dilution air formaldehyde sample, ml... paragraph (d)(3) of this section): Wet concentration = Kw × dry concentration. Where: (1)(i) For English...

Drivers of Finished-Goods Inventory in the U.S. Automobile Industry

OpenAIRE

Gérard P. Cachon; Marcelo Olivares

2010-01-01

Automobile manufacturers in the U.S. supply chain exhibit significant differences in their days of supply of finished vehicles (average inventory divided by average daily sales rate). For example, from 1995 to 2004, Toyota consistently carried approximately 30 fewer days of supply than General Motors. This suggests that Toyota's well-documented advantage in manufacturing efficiency, product design, and upstream supply chain management extends to their finished-goods inventory in their downstr...

Comparison study of multistep forging and injection forging of automobile fasteners

OpenAIRE

Chen Senyong; Qin Yi

2015-01-01

In order to improve production efficiency, injection forging as a feasible approach was introduced to automobile fasteners production. In the study reported in this paper, two forging approaches, traditional multistep forging and injection forging, were analysed by using a finite element method. Using ABAQUS and DEFORM, some significant factors, namely, forging force, energy consumption, component accuracy and stress distribution in the die, were compared to explore the potential and challeng...

Associations between emotional exhaustion, social capital, workload, and latitude in decision-making among professionals working with people with disabilities.

Science.gov (United States)

Kowalski, Christoph; Driller, Elke; Ernstmann, Nicole; Alich, Saskia; Karbach, Ute; Ommen, Oliver; Schulz-Nieswandt, Frank; Pfaff, Holger

2010-01-01

Many people working in human services in Western countries suffer from burnout, characterized by emotional exhaustion, depersonalization, and decreased personal performance. Prevention of emotional exhaustion (the first phase of burnout) constitutes a great challenge because emotional exhaustion may cause increasing turnover rates in staff and lead to a lesser quality of care. Prevention of emotional exhaustion requires knowledge of its predictors. The aim of this study was to investigate the associations between emotional exhaustion, social capital, workload, and latitude in decision-making among German professionals working in the care of persons with intellectual and physical disabilities. The study was based on a survey in a sheltered workshop and 5 homes for disabled persons with 175 professionals. Burnout was measured with the German version of the Maslach Burnout Inventory-General Survey (MBI-GS). A multivariate logistic regression analysis was computed. Logistic regression identified the following three significant predictors of emotional exhaustion in the sample: workload (OR, 4.192; CI, 2.136-8.227), latitude in decision-making (OR, 0.306; CI, 0.115-0.811), and male gender (OR, 4.123; CI, 1.796-9.462). Nagelkerke's Pseudo-R(2) was 0.344. The results of this study demonstrate that specific factors in work organization are associated with emotional exhaustion. Taking into account sociodemographic changes and the upcoming challenges for human services professionals, the results underline the importance of considering aspects of organization at the workplace to prevent burnout. Specific circumstances of male employees must be considered. Copyright 2009 Elsevier Ltd. All rights reserved.

Environmental strategies in the automobile industry; Umweltstrategien in der Automobilbranche

Energy Technology Data Exchange (ETDEWEB)

Bratzel, S.; Tellermann, R. [Center of Automotive, FHDW, Bergisch Gladbach (Germany)

2007-12-15

An actual market analysis on the environment strategies of the automobile industry concludes that the large companies react preferential with marketing measures to the climatic change debate and do not consequently support innovative environmental technology developments. The study show that the companies BMW, Toyota, and Volkswagen have the best environmental stategies, Daimler, Ford, Honda Porsche, Peugeot, Citroen show fragments of an environmental strategey, Chrysler, General Motors, Fiat, Mitsubishi and Nissan/Renault invest in marketing strategies, but not in environmental strategies.

Amplitude-phase characteristics of regulators of high -speed automobile diesels

OpenAIRE

Тырловой, С. И.

2009-01-01

The regulator frequency response has been analyzed to work out a strategy for repairing and renewal of fuel equipment used by foreign high-speed automobile diesels. For taking into consideration the heavy gradients of kinetic energy of the regulator elements the Lagrange equation of the second kind that includes the partial derivative of kinetic energy along the axis of motion of a gauge clutch was used.  Such a record, which was not kept for the known models, allowed for considerable clarifi...

46 CFR 63.25-7 - Exhaust gas boilers.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Exhaust gas boilers. 63.25-7 Section 63.25-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING AUTOMATIC AUXILIARY BOILERS Requirements for Specific Types of Automatic Auxiliary Boilers § 63.25-7 Exhaust gas boilers. (a) Construction...

30 CFR 36.26 - Composition of exhaust gas.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Composition of exhaust gas. 36.26 Section 36.26... EQUIPMENT Construction and Design Requirements § 36.26 Composition of exhaust gas. (a) Preliminary engine... methane) is a satisfactory substitute for pure methane in these tests. (c) Coupling or adapter. The...

40 CFR 1065.230 - Raw exhaust flow meter.

Science.gov (United States)

2010-07-01

... the following cases, you may use a raw exhaust flow meter signal that does not give the actual value... dew and pressure, p total at the flow meter inlet. Use these values in emission calculations according... CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.230 Raw exhaust...

14C-labeled diesel exhaust particles: chemical characteristics and bioavailability studies

International Nuclear Information System (INIS)

Sun, J.D.; Wolff, R.K.; Dutcher, J.S.; Brooks, A.L.

1981-01-01

Little is known about the deposition, retention and biological fate of the organic compounds associated with diesel exhaust particles. In the studies reported here, a one-cylinder diesel engine was operated on diesel fuel spiked with 14 C-benzene, 14 C-hexadecane or 14 C-dotriacontane to generate 14 C-labeled diesel exhaust. Approximately 1% of the exhaust radioactivity was associated with the particulate phase of diesel exhaust. Chemical fractionation of the particle extract showed the 14 C to be present in each of the various chemical class fractions collected. Serum removed approx. 60% of the dichloromethane extractable radioactivity from these diesel particles while saline removed only approx. 6%. This suggested that the organic compounds may be removed from diesel particles in vivo. Future inhalation exposures of rodents to 14 C-labeled diesel exhausts are planned to gain additional information on the health risk of human exposure to diesel exhaust

High temperature sensors for exhaust diagnosis

Energy Technology Data Exchange (ETDEWEB)

Svenningstorp, Henrik

2000-07-01

One of the largest problems that we will have to deal with on this planet this millennium is to stop the pollution of our environment. In many of the ongoing works to reduce toxic emissions, gas sensors capable of enduring rough environments and high temperatures, would be a great tool. The different applications where sensors like this would be useful vary between everything from online measurement in the paper industry and food industry to measurement in the exhaust pipe of a car. In my project we have tested Schottky diodes and MlSiCFET sensor as gas sensors operating at high temperatures. The measurement condition in the exhaust pipe of a car is extremely tough, not only is the temperature high and the different gases quite harmful, there are also a lot of particles that can affect the sensors in an undesirable way. In my project we have been testing Schottky diodes and MlSiCFET sensors based on SiC as high temperature sensors, both in the laboratory with simulated exhaust and after a real engine. In this thesis we conclude that these sensors can work in the hostile environment of an engines exhaust. It is shown that when measuring in a gas mixture with a fixed I below one, where the I-value is controlled by the O{sub 2} concentration, a sensor with a catalytic gate metal as sensitive material respond more to the increased O{sub 2} concentration than the increased HC concentration when varying the two correspondingly. A number of different sensors have been tested in simulated exhaust towards NO{sub x}. It was shown that resistivity changes in the thin gate metal influenced the gas response. Tests have been performed where sensors were a part of a SCR system with promising results concerning NH{sub 3} sensitivity. With a working temperature of 300 deg C there is no contamination of the metal surface.

Dual-purpose power plants, experiences with exhaust gas purification plants

International Nuclear Information System (INIS)

Dietrich, R.

1993-01-01

From 1984 to 1988, the research and development project ''pollutant reduction for exhaust gases from heat production systems'' sponsored by the Federal Ministry of Research and Technology (BMFT) has been carried out by TUeV in Bavaria. This project was to show the state of exhaust gas technology for small and medium-sized plants (boilers and motoric heat generators). When publishing the final report, no positive balance could be given. Based on the results, the succession project ''Exhaust gas purification plants in field test'' (ARIF) has been started. This project has the following objectives: -Measuring technical investigation of the exhaust gas purification of motoric driven heat generator systems in field test. - Suitability of hand measuring devices for emissions for a discontinuous control of the exhaust gas purification plat by the operator. - Control of new methods regarding pollutant reduction for motoric and conventional heat generators. (orig.) [de

Infrared thermography application on predictive maintenance for exhaust fan motor

International Nuclear Information System (INIS)

I Wayan Widiana; Jakaria; Artadi Heru; Mulyono

2013-01-01

To determine the condition of the exhaust fan motor in terms of heat dissipation, predictive maintenance needs to be done. One way is to use infrared thermography. The method used is an infrared thermography with qualitative technique which the analysis focused on the distribution patterns of heat captured by the infrared camera. From measurement results expected to be obtained data of the heat distribution occurs in the motor exhaust fan so it can be given treatment or further improvements recommendations to avoid failure of the operation. Results of measurements on the motor exhaust fan 9 and the motor exhaust fan 10 indicates that there is excessive heat dissipation (over heating). The recommendation given is increasing the motor capacity of 11 kW to 18 kW with a consideration of the addition load on exhaust fan system and age of motor more than 22 years. (author)

Work plan for new SY tank farm exhauster, on-site fabrication activities

International Nuclear Information System (INIS)

McClees, J.

1994-01-01

The replacement SY tank farm exhauster unit is a new piece of equipment, designed to replace the existing SY tank farm K1 Ventilation System exhauster unit. This work plan describes the shop fabrication activities associated with the receiving, assembly, repair, modification, and testing of the new SY tank farm primary exhauster. A general list of these activities include, but are not limited to: repair all shipping damages, including procurement of replacement parts; fabricate hardware needed to install exhauster in the field (e.g., Vent duct tie-in, duct concrete footings/hangers, stack concrete footings, etc.); incorporate equipment modification as provided by WHC Engineering (e.g., Rewire the Alarm Annunciator Cabinet as fail-safe, connections between the exhauster and stack sample cabinet, etc.); test the entire exhauster unit, to the extent possible, prior to field installation; and prepare exhauster unit for transfer to and installation at SY tank farm

Research on embedded automobile collision avoidance system

Directory of Open Access Journals (Sweden)

TAO Feng

2016-08-01

Full Text Available Taking ARM embedded Linux operating system as the development platform,combined with AVR microcontroller,while optimizing the ranging algorithm and using air ultrasonic transducer,the measurement range of which can be up to 50 meter,this paper designs a high-precision,range far,low price,various models suitable automobile collision avoidance warning system.The system adopts Forlinx OK6410 development board for the master.AVR microcontroller is responsible for taking the data of traveling distance between vehicles,and with the ARM development board via RS232 communication transfers vehicle′s distance and speed information to the ARM development boards.The system uses the established collision avoidance model to get alarm information.Experiments show that the system can accurately send out alarm information within a certain range.It is innovative and practical.

Head-up and head-down displays integration in automobiles

Science.gov (United States)

Betancur, J. Alejandro; Osorio-Gómez, Gilberto; Agudelo, J. David

2014-06-01

In automotive industry, the dashboard has been ergonomically developed in order to keep the driver focused on the horizon while driving, but the possibility to access external electronic devices constraints the driver to turn away his face, generating dangerous situations in spite of the short periods of time. Therefore, this work explores the integration of Head-Up Displays and Head-Down Displays in automobiles, proposing configurations that give to drivers the facility to driving focused. In this way, some of the main ergonomic comments about those configurations are proposed; and also, some technical comments regarding the implemented arrangements are given.

Influence of Rack Design and Disease Prevalence on Detection of Rodent Pathogens in Exhaust Debris Samples from Individually Ventilated Caging Systems.

Science.gov (United States)

Bauer, Beth A; Besch-Williford, Cynthia; Livingston, Robert S; Crim, Marcus J; Riley, Lela K; Myles, Matthew H

2016-11-01

Sampling of bedding debris within the exhaust systems of ventilated racks may be a mechanism for detecting murine pathogens in colony animals. This study examined the effectiveness of detecting pathogens by PCR analysis of exhaust debris samples collected from ventilated racks of 2 different rack designs, one with unfiltered air flow from within the cage to the air-exhaust pathway, and the other had a filter between the cage and the air-exhaust pathway. For 12 wk, racks were populated with either 1 or 5 cages of mice (3 mice per cage) infected with one of the following pathogens: mouse norovirus (MNV), mouse parvovirus (MPV), mouse hepatitis virus (MHV), Helicobacter spp., Pasteurella pneumotropica, pinworms, Entamoeba muris, Tritrichomonas muris, and fur mites. Pathogen shedding by infected mice was monitored throughout the study. In the filter-containing rack, PCR testing of exhaust plenums yielded negative results for all pathogens at all time points of the study. In the rack with open air flow, pathogens detected by PCR analysis of exhaust debris included MHV, Helicobacter spp., P. pneumotropica, pinworms, enteric protozoa, and fur mites; these pathogens were detected in racks housing either 1 or 5 cages of infected mice. Neither MPV nor MNV was detected in exhaust debris, even though prolonged viral shedding was confirmed. These results demonstrate that testing rack exhaust debris from racks with unfiltered air flow detected MHV, enteric bacteria and parasites, and fur mites. However, this method failed to reliably detect MNV or MPV infection of colony animals.

Aerodynamic Control of Exhaust

DEFF Research Database (Denmark)

Hyldgård, Carl-Erik

In the autumn of 1985 the Unive!Sity of Aalborg was approached by the manufacturer C. P. Aaberg, who had obtained aerodynilmic control of the exhaust by means of injection. The remaining investigations comprising optimizations of the system with regard to effect, consumption, requirements...

Prevalence and predictors of home and automobile smoking bans and child environmental tobacco smoke exposure: a cross-sectional study of U.S.- and Mexico-born Hispanic women with young children

Directory of Open Access Journals (Sweden)

Kegler Michelle C

2006-10-01

Full Text Available Abstract Background Detrimental effects of environmental tobacco smoke (ETS exposure on child health are well documented. Because young children's primary exposure to ETS occurs in homes and automobiles, voluntary smoking restrictions can substantially reduce exposure. We assessed the prevalence of home and automobile smoking bans among U.S.- and Mexico-born Hispanics in the southwestern United States, and examined the influence of mother's country of birth and smoking practices on voluntary smoking bans and on child ETS exposure. Methods U.S.- and Mexico-born Hispanic mothers of children aged 2 through 12 years were systematically sampled from health clinics in Albuquerque, New Mexico. In-person interviews were conducted with 269 mothers (75.4% response rate to obtain information on main study outcomes (complete versus no/partial home and automobile smoking bans; child room and automobile ETS exposure and risk factors (mother's country of birth, maternal and household smoking behaviors. Data were analyzed with chi square tests and logistic regression models. Results Three-fourths (74–77% of U.S.-born and 90–95% of Mexico-born mothers reported complete automobile and home smoking bans. In multivariate analyses, mother's U.S nativity, mother's current smoking, and presence of other adult smokers in the home were associated with significantly increased odds of not having a complete home or automobile smoking ban. Mother's smoking was associated with child ETS exposure both indoors (odds ratio [OR] = 3.31 and in automobiles (OR = 2.97. Children of U.S.-born mothers had increased odds of exposure to ETS indoors (OR = 3.24; 95% confidence interval [CI]: 1.37–7.69, but not in automobiles. Having complete smoking bans was associated with substantially reduced odds of child ETS exposure both indoors (OR = 0.10; 95% CI: 0.04–0.27 and in automobiles (OR = 0.14; 95% CI: 0.05–0.36. Conclusion This study of Hispanic mothers in the southwestern U

Fuel consumption and exhaust emissions of aircrafts

Energy Technology Data Exchange (ETDEWEB)

Buechler, R. [Institute of Flightmechanics, Braunschweig (Germany)

1997-12-31

The reduction of contamination of sensitive atmospheric layers by improved flight planning steps, is investigated. Calculated results have shown, that a further development of flight track planning allows considerable improvements on fuel consumption and exhaust emissions. Even if air traffic will further increase, optimistic investigations forecast a reduction of the environmental damage by aircraft exhausts, if the effects of improved flight track arrangement and engine innovations will be combined. (R.P.) 4 refs.

Noise Radiation Of A Strongly Pulsating Tailpipe Exhaust

Science.gov (United States)

Peizi, Li; Genhua, Dai; Zhichi, Zhu

1993-11-01

The method of characteristics is used to solve the problem of the propagation of a strongly pulsating flow in an exhaust system tailpipe. For a strongly pulsating exhaust, the flow may shock at the pipe's open end at some point in a pulsating where the flow pressure exceeds its critical value. The method fails if one insists on setting the flow pressure equal to the atmospheric pressure as the pipe end boundary condition. To solve the problem, we set the Mach number equal to 1 as the boundary condition when the flow pressure exceeds its critical value. For a strongly pulsating flow, the fluctuations of flow variables may be much higher than their respective time averages. Therefore, the acoustic radiation method would fail in the computation of the noise radiation from the pipe's open end. We simulate the exhaust flow out of the open end as a simple sound source to compute the noise radiation, which has been successfully applied in reference [1]. The simple sound source strength is proportional to the volume acceleration of exhaust gas. Also computed is the noise radiation from the turbulence of the exhaust flow, as was done in reference [1]. Noise from a reciprocating valve simulator has been treated in detail. The radiation efficiency is very low for the pressure range considered and is about 10 -5. The radiation efficiency coefficient increases with the square of the frequency. Computation of the pipe length dependence of the noise radiation and mass flux allows us to design a suitable length for an aerodynamic noise generator or a reciprocating internal combustion engine. For the former, powerful noise radiation is preferable. For the latter, maximum mass flux is desired because a freer exhaust is preferable.

[Environmental pollution by products of wear and tear automobile-road complex].

Science.gov (United States)

Levanchuk, A V

2014-01-01

North-West State Medical University named after I.I. Mechnikov, Saint Petersburg, Russian Federation, 191015. There is supposed the method for the assessment of amounts of pollutants released into the environment during the operational wear of tyre treads, brake system of cars and the road pavement. There are presented results of chemical analysis of residues of combustion. The necessity of control of products of work wear of automobile-road complex has been substantiated.

Environmental and biological monitoring of benzene during self-service automobile refueling.

OpenAIRE

Egeghy, P P; Tornero-Velez, R; Rappaport, S M

2000-01-01

Although automobile refueling represents the major source of benzene exposure among the nonsmoking public, few data are available regarding such exposures and the associated uptake of benzene. We repeatedly measured benzene exposure and uptake (via benzene in exhaled breath) among 39 self-service customers using self-administered monitoring, a technique rarely used to obtain measurements from the general public (130 sets of measurements were obtained). Benzene exposures averaged 2.9 mg/m(3) (...

ESTIMATED RATE OF FATAL AUTOMOBILE ACCIDENTS ATTRIBUTABLE TO ACUTE SOLVENT EXPOSURE AT LOW INHALED CONCENTRATIONS

Science.gov (United States)

Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mecha...

Catalytic exhaust control

Energy Technology Data Exchange (ETDEWEB)

Heinemann, H

1973-09-01

Recent achievements and problems in the development of exhaust control devices in the USA are reviewed. To meet the 1976 emission standards, catalytic systems for the oxidation of carbon monoxide and hydrocarbons and for the reduction of nitrogen oxides to nitrogen and water are needed. While oxidizing catalysts using platinum, palladium, copper, vanadium, and chromium appplied on alumina or ceramic materials are more or less effective in emission control, there are no catalytic devices for the reduction of nitrogen oxides with the required useful life of 25,000 to 50,000 miles as yet available. In the case of platinum catalysts on monolithic supports, the operating temperature of 650 to 750/sup 0/C as required for the oxidation process may cause inactivation of the catalysts and fusion of the support material. The oxidation of CO and hydrocarbons is inhibited by high concentrations of CO, nitric oxide, and hydrocarbons. The use of catalytic converters requires the use of lead-free or low-lead gasoline. The nitrogen oxides conversion efficiency is considerably influenced by the oxygen-to-CO ratio of the exhaust gas, which makes limitation of this ratio necessary.

Psychic and moral exhaustion in primary care workers

Directory of Open Access Journals (Sweden)

Priscilla Brandão Bacci Pegoraro

2017-12-01

Full Text Available Abstract OBJECTIVE To report the experience of developing a workshop proposal to assist local managers with the identification, management and prevention of primary care workers' psychic and moral exhaustion. METHOD The workshop was developed through a literature review performed between November 2014 and June 2015. The temporal cut considered studies of the ten previous years. The selection included studies describing collective interventions for situations generating psychic and moral exhaustion, preferably in primary care services. RESULTS Thirty-five articles were analyzed. The workshop provides five meetings with an average duration of one hour. The themes are: awareness; recognizing personal stress; dealing with personal stress; recognizing team stress; and dealing with team stress. The workshop is based on five key principles: detection and coping; attention to interpersonal relationships; communication; self-knowledge and mindfulness. CONCLUSION Psychic and moral exhaustion may reflect negatively on workers' health, the care, and the organization. The proposal of measures to recognize, deal with and prevent psychic and moral exhaustion is relevant and strategic in the constant search for improvement of satisfaction and quality.

AUTOMATIC CONTROL SYSTEM OF WINTER AUTOMOBILE-ROAD MAINTENANCE

Directory of Open Access Journals (Sweden)

I. I. Leonovich

2008-01-01

Full Text Available In order to ensure a rational usage of financial and material resources directed on winter automobile-road maintenance in theRepublicofBelarusan automatic control system of winter maintenance is under its development and introduction.  The main purpose of the system is to obtain and use meteorological information on the state of a road network that allows to take necessary organizational and technological solutions ensuring safety and continuity of traffic during winter. This system also presupposes to ensure constant control over the state of roadway covering, expenditure of anti-glazed frost materials at all levels of management.The paper considers main aspects pertaining to introduction of the automatic control system of winter maintenance

An Innovative Approach to Enhancing the Sustainable Development of Japanese Automobile Suppliers

Directory of Open Access Journals (Sweden)

Chia-Nan Wang

2016-04-01

Full Text Available The Japanese automobile industry has been hit sharply by the economic downturn of recent decades. The rise in costs and decline in sales have led to serious problems in the auto industry. In order to address these issues, most companies engage in downsizing and redesigning production operations. It is crucial to investigate the time wasted by replacing assembly boards occurring in manufacturing lines. Therefore, the aim of this study was to provide an integrated approach, Teoriya Resheniya Izobreatatelskih Zadatch (TRIZ, to providing efficient solutions for the automobile industry. The first step of this methodology is to detail the technical problems using the Function and Attribute Analysis (FAA model. Secondly, a contradiction matrix and the inventive principle were applied to find the solutions. In this study, an auto part supplier named Sumi-Hanel located in Hanoi, Vietnam, was taken as a case study; the empirical results showed that waste time had been reduced to 67%, nearly 8400 square meters was saved, and a 20% cost reduction was achieved by reusing old frames. The research proves that the combination of TRIZ and lean manufacturing successfully increases production performance and reduces waste due to technological advancements.

Elevated exhaust temperature, zoned, electrically-heated particulate matter filter

Science.gov (United States)

Gonze, Eugene V [Pinckney, MI; Bhatia, Garima [Bangalore, IN

2012-04-17

A system includes an electrical heater and a particulate matter (PM) filter that is arranged one of adjacent to and in contact with the electrical heater. A control module selectively increases an exhaust gas temperature of an engine to a first temperature and that initiates regeneration of the PM filter using the electrical heater while the exhaust gas temperature is above the first temperature. The first temperature is greater than a maximum exhaust gas temperature at the PM filter during non-regeneration operation and is less than an oxidation temperature of the PM.

Comparison of aldehyde emissions simulation with FTIR measurements in the exhaust of a spark ignition engine fueled by ethanol

Science.gov (United States)

Zarante, Paola Helena Barros; Sodré, José Ricardo

2018-02-01

This work presents a numerical simulation model for aldehyde formation and exhaust emissions from ethanol-fueled spark ignition engines. The aldehyde simulation model was developed using FORTRAN software, with the input data obtained from the dedicated engine cycle simulation software AVL BOOST. The model calculates formaldehyde and acetaldehyde concentrations from post-flame partial oxidation of methane, ethane and unburned ethanol. The calculated values were compared with experimental data obtained from a mid-size sedan powered by a 1.4-l spark ignition engine, tested on a chassis dynamometer. Exhaust aldehyde concentrations were determined using a Fourier Transform Infrared (FTIR) Spectroscopy analyzer. In general, the results demonstrate that the concentrations of aldehydes and the source elements increased with engine speed and exhaust gas temperature. The measured acetaldehyde concentrations showed values from 3 to 6 times higher than formaldehyde in the range studied. The model could predict reasonably well the qualitative experimental trends, with the quantitative results showing a maximum discrepancy of 39% for acetaldehyde concentration and 21 ppm for exhaust formaldehyde.

Research on simulation based material delivery system for an automobile company with multi logistics center

Science.gov (United States)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

FY 1974 report on the results of the Sunshine Project. Comprehensive study of hydrogen use subsystem and study on the periphery technology (Study on automobile engine); 1974 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu seika hokokusho. Jidosha engine ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-10

The paper made an investigational study of the data of a wide range which seems to be related to the use of hydrogen as automobile use fuel. The advantage is that the exhaust can almost be non-pollutant. The engine performance can be on the same level as that of the present gasoline engine or can be improved. The reasons are that the compression rate is heightened and that automobile can be driven at lean mixture rate. As to weak points, the volume and weight increase when it is loaded on vehicle. The cost of hydrogen is higher than that of petroleum. The problems to be quickly solved are as follows. Improvement of the combustion method: a wide range of development not only the electric ignition method, but the diesel method, and the basic study for it. It is necessary to establish the basis for a method to connect the storage method and engine. It is also necessary to comprehensively review rules related to safety. For the future, the conversion to artificial fuel is indispensable, and hydrogen has the most characteristics as energy medium. The problem is much larger sizes of fuel tank and pump, but there will be a possibility of producing a new technology together with the hydrogen production technology. The fundamental research should be promoted without any hesitation. (translated by NEDO)

Female identity discourse in automobile advertisements

Directory of Open Access Journals (Sweden)

Montserrat López Díaz

2012-01-01

Full Text Available The article analyzes the way in which the modern car-advertisement defines the identity of women as potential purchasers – to whom it is designed to get through. The research includes language and iconic instruments by which this type of advertisement aims to create a feminized market of products formerly recognized as traditionally masculine. The identification of the addressee of each publicity material might be subsumed under a set of stereotypes, thus enabling advertisers to get across their message using the code of addressee’s own values. The present paper concentrates on the linguistic specifity of the ads for high-tech goods (automobiles targeting the feminine public and eventually points out their high degree of markedness according to the sex of addressees. Discourse analysis and a closer look at linguistic means appearing in French, Spanish and Polish automotive commercials both reveals a stereotyped woman’s image and shows how they happen to perpetutate it.

SWSA [Solid Waste Storage Area] 6 tumulus disposal demonstration

International Nuclear Information System (INIS)

Van Hoesen, S.D.; Clapp, R.B.

1987-01-01

A facility to demonstrate the above-grade disposal of solid low-level radioactive wastes (LLW) is being constructed in the Solid Waste Storage Area 6 (SWSA 6) at the Oak Ridge National Laboratory (ORNL). The demonstration facility will utilize the ''Tumulus'' technology, which basically involves sealing the waste in concrete vaults, placing the vaults on a grade level concrete pad, and covering the pad with a soil cover after vault placement is complete. Loading of the demonstration unit is scheduled to begin in June, and will continue one to one and a half years until the 28,000 ft 3 capacity is exhausted

Effect of Automobile Travel Time Between Patients' Homes and Ophthalmologists' Offices on Screening for Diabetic Retinopathy.

Science.gov (United States)

Macon, Céline; Carrier, Hélène; Janczewski, Aurélie; Verger, Pierre; Casanova, Ludovic

2018-01-01

The accessibility of ophthalmologists appears to influence the quality of screening for diabetic retinopathy (DR). The principal objective of this study was to analyze the effect of automobile travel time to the closest ophthalmologist on the time to DR screening. This historical cohort study used reimbursement databases from the principal national health insurance fund. Patients were included if they had been reimbursed at least thrice for oral antidiabetic medications in the 12 months before the study start date. Patients were followed up from January 1, 2008, for 4 years. The expected event was a DR screening by an ocular fundus examination. The automobile travel time to the nearest ophthalmologist was calculated by the distance between communes, estimated by appropriate software. A Kaplan-Meier curve and a multivariate Cox model were used to model the effect of travel time on the time until DR screening. A sensitivity analysis of travel time described the results of the Cox model. At the start of 2008, 6,573 patients living in 328 different municipalities were included. The multivariate model found that patients living 60 min or more away from an ophthalmologist had a lower instantaneous probability of DR screening than those living travel time. Increased automobile travel time for patients with diabetes to the nearest ophthalmologist was associated with a longer time to DR screening.

Research and application of online measurement system of tire tread profile in automobile tire production

Science.gov (United States)

Wang, Pengyao; Chen, Xiangguang; Yang, Kai; Liu, Xuejiao

2017-01-01

To improve the measuring efficiency of width and thickness of tire tread in the process of automobile tire production, the actual condition for the tire production process is analyzed, and a fast online measurement system based on moving tire tread of tire specifications is established in this paper. The coordinate data of tire tread profile is acquired by 3D laser sensor, and we use C# language for programming which is an object-oriented programming language to complete the development of client program. The system with laser sensor can provide real-time display of tire tread profile and the data to require in the process of tire production. Experimental results demonstrate that the measuring precision of the system is <= 1mm, it can meet the measurement requirements of the production process, and the system has the characteristics of convenient installation and testing, system stable operation.

Optimization of eyesafe avalanche photodiode lidar for automobile safety and autonomous navigation systems

Science.gov (United States)

Williams, George M.

2017-03-01

Newly emerging accident-reducing, driver-assistance, and autonomous-navigation technology for automobiles is based on real-time three-dimensional mapping and object detection, tracking, and classification using lidar sensors. Yet, the lack of lidar sensors suitable for meeting application requirements appreciably limits practical widespread use of lidar in trucking, public livery, consumer cars, and fleet automobiles. To address this need, a system-engineering perspective to eyesafe lidar-system design for high-level advanced driver-assistance sensor systems and a design trade study including 1.5-μm spot-scanned, line-scanned, and flash-lidar systems are presented. A cost-effective lidar instrument design is then proposed based on high-repetition-rate diode-pumped solid-state lasers and high-gain, low-excess-noise InGaAs avalanche photodiode receivers and focal plane arrays. Using probabilistic receiver-operating-characteristic analysis, derived from measured component performance, a compact lidar system is proposed that is capable of 220 m ranging with 5-cm accuracy, which can be readily scaled to a 360-deg field of regard.

Social Sustainability Issues and Older Adults’ Dependence on Automobiles in Low-Density Environments

Directory of Open Access Journals (Sweden)

Hitomi Nakanishi

2015-06-01

Full Text Available An implicit assumption underlying government strategies to achieve a more sustainable urban transportation system is that all automobile users will be encouraged or persuaded to use more “green” transportation: public transportation, walking and cycling. Little consideration has been given as to how sustainable transportation policies and programmess might impact on different age groups in society, including those retired or semi-retired, despite the fact that an unprecedented number of older drivers will be on the highways in the next few decades. There is limited literature on the contextual factors behind their continued reliance on automobiles, their actual driving behavior (e.g., route choice and time of day to drive framed within the context of social sustainability. This paper introduces the elements of transportation and social sustainability then conducts a comprehensive international literature review focusing on older drivers, their travel choices and associated social sustainability issues. It describes a case study, low-density city and presents empirical evidence, from two surveys conducted in Canberra, Australia. The paper concludes with future research directions that address these issues associated with sustainable transportation.

Compact high-speed MWIR spectrometer applied to monitor CO2 exhaust dynamics from a turbojet engine

Science.gov (United States)

Linares-Herrero, R.; Vergara, G.; Gutiérrez Álvarez, R.; Fernández Montojo, C.; Gómez, L. J.; Villamayor, V.; Baldasano Ramírez, A.; Montojo, M. T.; Archilla, V.; Jiménez, A.; Mercader, D.; González, A.; Entero, A.

2013-05-01

Dfgfdg Due to international environmental regulations, aircraft turbojet manufacturers are required to analyze the gases exhausted during engine operation (CO, CO2, NOx, particles, unburned hydrocarbons (aka UHC), among others).Standard procedures, which involve sampling the gases from the exhaust plume and the analysis of the emissions, are usually complex and expensive, making a real need for techniques that allow a more frequent and reliable emissions measurements, and a desire to move from the traditional gas sampling-based methods to real time and non-intrusive gas exhaust analysis, usually spectroscopic. It is expected that the development of more precise and faster optical methods will provide better solutions in terms of performance/cost ratio. In this work the analysis of high-speed infrared emission spectroscopy measurements of plume exhaust are presented. The data was collected during the test trials of commercial engines carried out at Turbojet Testing Center-INTA. The results demonstrate the reliability of the technique for studying and monitoring the dynamics of the exhausted CO2 by the observation of the infrared emission of hot gases. A compact (no moving parts), high-speed, uncooled MWIR spectrometer was used for the data collection. This device is capable to register more than 5000 spectra per second in the infrared band ranging between 3.0 and 4.6 microns. Each spectrum is comprised by 128 spectral subbands with aband width of 60 nm. The spectrometer operated in a passive stand-off mode and the results from the measurements provided information of both the dynamics and the concentration of the CO2 during engine operation.

The automotive application of discontinuously reinforced TiB-Ti composites

Science.gov (United States)

Saito, Takashi

2004-05-01

In 1998, Toyota Motor Corporation adopted intake valves and exhaust valves made of titanium-based alloys for the engine of its Altezza. Both valves were manufactured via a newly developed cost-effective powder metallurgy process. The exhaust valve is made of a newly developed titanium metal-matrix composite (MMC). The valve has achieved sufficient durability and reliability with a manufacturing cost acceptable for the mass-produced automobile engine components.

Teachers' Emotional Exhaustion Is Negatively Related to Students' Achievement: Evidence from a Large-Scale Assessment Study

Science.gov (United States)

Klusmann, Uta; Richter, Dirk; Lüdtke, Oliver

2016-01-01

Prior research has demonstrated that teachers' professional knowledge and motivation are strongly related to students' learning and motivation. Symptoms of teachers' stress and burnout (e.g., emotional exhaustion) are also thought to influence students' achievement, but no empirical study has tested this prediction. Using multilevel analyses and a…

Plasma exhaust purification by thermal swing adsorption: Experimental results and modeling

International Nuclear Information System (INIS)

Ricapito, I.; Malara, R.C.

1996-01-01

For several years at the Joint Research Centre-Ispra laboratories, cyclic adsorption processes have been developed for the purification of the plasma exhaust stream of a deuterium-tritium fusion reactor. A purification process consisting of two coupled thermal swing adsorption systems seemed to be the most convenient process. In this context, a screening study was carried out to select the most suitable adsorbent materials and appropriate working temperatures. This was mainly done by experimental measurements of adsorption isotherms of the single components of the plasma exhaust stream and by a careful evaluation of the multicomponent adsorption equilibria. Experiments on adsorption dynamics were carried out in a pilot plant to demonstrate the feasibility and to evaluate the performance of the process. The experimental apparatus was designed to treat gas mixture flow rates up to 20 to 30 standard temperature and pressure l/h. A mathematical model was developed and tested against the experimental results to describe the adsorption process and, in particular, to evaluate and to optimize the process cycle time. 27 refs., 4 figs., 9 tabs

基于微博的汽车品牌传播策略研究%Strategy Researchon Automobile Brand Advertising Based on Weibo

Institute of Scientific and Technical Information of China (English)

辛晖

2015-01-01

It has been notice by automobile enterprises gradually that traditional sales mode can no longer adapt to the com-petition in the automobile market,car market has transformed from seller's market to buyer's market.With the advent of the era of network, the competition of automobile market,to a great extent,is the competition of network marketing.UsingWeibo as a new channel for automobile brand advertising is aneffective brand communication strategy.%汽车企业逐渐认识到传统的销售模式已经不再适应激烈的汽车市场竞争，汽车市场由卖方市场向买方市场转化。随着网络时代的到来，汽车市场的竞争在很大程度上体现为网络营销的竞争，以品牌为核心的营销时代。以微博作为汽车品牌传播新渠道，是汽车品牌有效传播的营销策略。

Biodiesel exhaust-induced cytotoxicity and proinflammatory mediator production in human airway epithelial cells.

Science.gov (United States)

Mullins, Benjamin J; Kicic, Anthony; Ling, Kak-Ming; Mead-Hunter, Ryan; Larcombe, Alexander N

2016-01-01

Increasing use of biodiesel has prompted research into the potential health effects of biodiesel exhaust exposure. Few studies directly compare the health consequences of mineral diesel, biodiesel, or blend exhaust exposures. Here, we exposed human epithelial cell cultures to diluted exhaust generated by the combustion of Australian ultralow-sulfur-diesel (ULSD), unprocessed canola oil, 100% canola biodiesel (B100), and a blend of 20% canola biodiesel mixed with 80% ULSD. The physicochemical characteristics of the exhaust were assessed and we compared cellular viability, apoptosis, and levels of interleukin (IL)-6, IL-8, and Regulated on Activation, Normal T cell Expressed and Secreted (RANTES) in exposed cultured cells. Different fuel types produced significantly different amounts of exhaust gases and different particle characteristics. All exposures resulted in significant apoptosis and loss of viability when compared with control, with an increasing proportion of biodiesel being correlated with a decrease in viability. In most cases, exposure to exhaust resulted in an increase in mediator production, with the greatest increases most often in response to B100. Exposure to pure canola oil (PCO) exhaust did not increase mediator production, but resulted in a significant decrease in IL-8 and RANTES in some cases. Our results show that canola biodiesel exhaust exposure elicits inflammation and reduces viability of human epithelial cell cultures in vitro when compared with ULSD exhaust exposure. This may be related to an increase in particle surface area and number in B100 exhaust when compared with ULSD exhaust. Exposure to PCO exhaust elicited the greatest loss of cellular viability, but virtually no inflammatory response, likely due to an overall increase in average particle size. © 2014 Wiley Periodicals, Inc.

Neuropsychological sequelae of work-stress-related exhaustion.

Science.gov (United States)

Österberg, Kai; Skogsliden, Sofia; Karlson, Björn

2014-01-01

The aim was to assess long-term cognitive performance after substantial recovery from work-stress-related exhaustion, in relation to subjective cognitive complaints and return to active work. In total, 54 patients previously diagnosed with work-stress-related exhaustion participated in a neuropsychological examination ∼2 years after initial sick leave. Most participants were substantially recovered at follow-up, with only 13% still meeting the criteria for exhaustion disorder suggested by the Swedish National Board of Health and Welfare. When participants' scores on 14 neuropsychological tests were compared to a matched group of 50 controls, the former patient group showed lower performance mainly on attention tests of the reaction time type, but also slightly lower scores on visuo-spatial constructional ability. However, the former patient group performed better than controls on two memory tests and, in part, on a test of simultaneous capacity. Self-ratings of everyday cognitive problems remained significantly higher in the former patient group than among controls, but the extent of self-rated cognitive problems was generally unrelated to performance on the neuropsychological tests. No relationship between performance on these tests and the extent of work resumption was observed. In summary, persons with previous work-stress-related exhaustion showed persistent signs of a minor attention deficit, despite considerable general recovery and return to work.

The effect of vehicle exhausts on crops and other utility plants close to roads; Trafikavgasers effekter paa groedor och andra nyttovaexter i naerheten av vaegar

Energy Technology Data Exchange (ETDEWEB)

Pleijel, H.; Ahlfors, A.; Skaerby, L.; Pihl Karlsson, G.; Sjoedin, Aa.

1993-11-01

This report summarizes the present knowledge concerning the impact of automobile exhausts on plants and the research carried out at IVL in this field during the period 1988-1991. The investigations carried out at motorway E6 south of Gothenburg show: * that the concentrations of ethylene are high enough to cause pronounced effects on the bio indicator petunia, * that the ozone concentrations in the vicinity of the motorway are lower than the regional background concentrations, which was reflected in significantly less visible ozone injury on the ozone bio indicator, subterranean clover, close to the motorway after an ozone episode, * that the less ozone sensitive red clover, in contrast to subterranean clover, showed stimulated growth with increasing distance from the motorway, * that there was a tendency towards higher yields for cereals in the vicinity of the motorway, but the extent of and cause for this growth stimulation is not known at present. The effects of metals from catalytic converters is as yet uncertain, as is the understanding of effects of nitrogen oxides. 45 refs, 16 figs, 7 tabs

International Trade in Intermediate Inputs: The Case of the Automobile Industry

OpenAIRE

Markus Diehl

2001-01-01

International trade statistics and input-output tables are analyzed in order to test the hypothesis that international production networks have become more relevant. The share of imported inputs in the gross output value of the motor vehicle industry has grown significantly during the last two decades. Moreover, some low-income countries have become strong exporters of automobile parts, but this trade is mainly regional rather than global. Detailed results are presented in case studies on fou...

Environmental Effects of Driving Automobiles in the University of Malaya Campus: A Pilot Study

Directory of Open Access Journals (Sweden)

S.Y. Kong

2009-12-01

Full Text Available With the increase of human population there has been an evident increase in per capita automobile use and ownership, significantly to a point that almost every urban university campus faces serious challenges from the heavy traffic movement as well as the associated parking shortages. Multiple factors, including lack of land for new parking lots, high cost of building parking structures and the desire to preserve the air quality and campus green spaces are leading many educational institutions towards a new vision based upon expanded transit access, better bicycle and pedestrian facilities and financial incentives for students and staff to drive less. (Toor and Havlick, 2004 This is in stark contrast to the traditional approach to campus transportation planning of the University of Malaya (UM, Kuala Lumpur, Malaysia that allows students, staff and visitors to drive in the campus. The objective of this study is to investigate the related issues and environmental impact of allowing automobile driving in the campus. Studies will also be done to analyse the relationship between university campus planning and traffic condition. Air quality and noise pollution data of 3 selected sites in the campus will be recorded. Subsequently, the air pollutant index and noise pollution level will be identified and data analyses will be done on the data samples. Simultaneously, a survey questionnaire will be conducted to gauge the student’s attitude and degree of awareness with air and noise pollution in the campus. This pilot study reveals that the increasing use of automobiles within the campus has a negative impact on local environment and the quality of life in campus

Perceived social support and emotional exhaustion in HIV/AIDS ...

African Journals Online (AJOL)

Counsellors have been identified as a group of professionals at elevated risk of burnout in general and emotional exhaustion in particular. Considering the nature of the illness, ... the quality of the services they provide. Key words: Emotional exhaustion, perceived social support, burnout syndrome, demographic variables.

The Effects of Automobile Recalls on the Severity of Accidents

OpenAIRE

Hugo Benitez-Silva; Yong-Kyun Bae

2010-01-01

The number of automobile recalls in the U.S. has substantially increased over the last two decades, and after a record of over 30 million cars recalled in 2004, in the last few years it has consistently reached between 15 and 17 million, and in 2009 alone 16.4 million cars were recalled. Toyota's recall crisis in 2010 illustrates how recalls can affect a large number of American drivers and the defects connected to them can result in loss of life and serious accidents. However, in spite of th...

A Review of Voiture Minimum. Le Corbusier and the Automobile

Directory of Open Access Journals (Sweden)

Christoph Schnoor

2013-03-01

Full Text Available Here is a full-on celebration of cars and someone’s addiction to cars. In its midst drives Le Corbusier. The book, Voiture Minimum. Le Corbusier and the Automobile (Cambridge, Mass. and London: MIT Press, 2011, has recently been published by Spanish architect and academic Antonio Amado. What a curious book. It is something between a detective story circling around determining the date of a single drawing (1928 or 1936 and, simultaneously, it is “Everything you always wanted to know about Le Corbusier and cars but were afraid to ask”.

Vacuum exhaustion system for thermonuclear reactor and cryopump thereof

International Nuclear Information System (INIS)

Kobayashi, Shigetada.

1992-01-01

An impurity removing device is connected to a gas exhaust side of a plasma vacuum vessel by way of a gate valve, a cryopump is connected to the exit side of the device by way of an exit valve, a fuel transfer line is disposed for transferring fuels to a fuel purification system and a vacuum pump line is disposed to an exhaust gas line. Further, a tritium monitor is disposed to an exhaustion line and the line on the side of the exit of the monitor is branched into two ways, in which a tritium transfer pipe is disposed to one of them and an atmosphere release pipe is disposed on the other of them by way of an atmosphere releasing valve. Further, a condensation shebron is disposed for flowing in and out fuel isotope gases discharged from the plasma vacuum vessel, and a funnel discharge pipe is disposed for discharging a liquefied and condensed fluid. Since the gases to be exhausted are liquefied and condensed without coagulation or coagulation products are removed while operating the pump, the exhaust gases are processed continuously to reduce tritium inventory and make the regeneration step unnecessary and remarkably improve the heat efficiency. (N.H.)

PRODUCT EFFICIENCY IN THE SPANISH AUTOMOBILE MARKET

Directory of Open Access Journals (Sweden)

González, Eduardo

2013-01-01

Full Text Available This paper evaluates product efficiency in the Spanish automobile market. We use non parametric frontier techniques in order to estimate product efficiency scores for each model. These scores reflect the minimum price for which each car could be sold, given the bundle of tangible features it offers in comparison to the best-buy models. Unlike previous research, we use discounted prices which have been adjusted by car dealerships to meet sale targets. Therefore, we interpret the efficiency scores as indicators of the value of the intangible features of the brand. The results show that Audi, Volvo, Volkswagen and Mercedes offer the greatest intangible value, since they are heavily overpriced in terms of price/product ratios. Conversely, Seat, Kia, Renault and Dacia are the brands that can be taken as referent in terms of price/product ratios.

40 CFR 86.211-94 - Exhaust gas analytical system.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Exhaust gas analytical system. 86.211-94 Section 86.211-94 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.211-94 Exhaust gas...

Design and experimental study on desulphurization process of ship exhaust

Science.gov (United States)

Han, Mingyang; Hao, Shan; Zhou, Junbo; Gao, Liping

2018-02-01

This desulfurization process involves removing sulfur oxides with seawater or alkaline aqueous solutions and then treating the effluent by aeration and pH adjustment before discharging it into the ocean. In the desulfurization system, the spray tower is the key equipment and the venturi tubes are the pretreatment device. The two stages of plates are designed to fully absorb sulfur oxides in exhaust gases. The spiral nozzles atomize and evenly spray the desulfurizers into the tower. This study experimentally investigated the effectiveness of this desulfurization process and the factors influencing it under laboratory conditions, with a diesel engine exhaust used to represent ship exhaust. The experimental results show that this process can effectively absorb the SO2 in the exhaust. When the exhaust flow rate was 25 m3/h and the desulfurizer flow rate was 4 L/min, the sulfur removal efficiency (SRE) reached 99.7%. The flow rate, alkalinity, and temperature of seawater were found to have significant effects on the SRE. Adjusting seawater flow rate (SWR) and alkalinity within certain ranges can substantially improve the SRE.

Trace elements in particles of motor vehicle exhaust in Shanghai

International Nuclear Information System (INIS)

Jiang Da; Qiu Zhijun; Lu Rongrong; Qiu Huiyuan; Zhu Jieqing; Li Xiaolin

2002-01-01

A nuclear microprobe with high spatial resolution and high analytical sensitivity was applied to analyze trace elements, especially lead, in vehicle exhaust of Shanghai city. The result shows that the chemical composition and its corresponding x-ray relative intensity are different among different vehicle exhausts. There are many kinds of metal elements in particles of vehicle exhaust, most are harmful to people, such as Ti, Cr, Mn, Pb, etc. The authors found that the lead concentration was 6820 μg/g and the bromine concentration was 5300 μg/g in the exhaust from Santana using leaded gasoline (SULG), which is higher than any other kinds of vehicle exhausts. The authors have also detected the minimum lead in the particles of unleaded gasoline and its content varies from one to another. Its mean concentration was 450 μg/g and the highest reached 6210 μg/g. The unleaded gasoline's Pb existed in the whole particle while the leaded gasoline's enriched in the surface of the particle and was more harmful to the human beings

Work-related exhaustion and telomere length: a population-based study.

Directory of Open Access Journals (Sweden)

Kirsi Ahola

Full Text Available Psychological stress is suggested to accelerate the rate of biological aging. We investigated whether work-related exhaustion, an indicator of prolonged work stress, is associated with accelerated biological aging, as indicated by shorter leukocyte telomeres, that is, the DNA-protein complexes that cap chromosomal ends in cells.We used data from a representative sample of the Finnish working-age population, the Health 2000 Study. Our sample consisted of 2911 men and women aged 30-64. Work-related exhaustion was assessed using the Maslach Burnout Inventory--General Survey. We determined relative leukocyte telomere length using a quantitative real-time polymerase chain reaction (PCR -based method.After adjustment for age and sex, individuals with severe exhaustion had leukocyte telomeres on average 0.043 relative units shorter (standard error of the mean 0.016 than those with no exhaustion (p = 0.009. The association between exhaustion and relative telomere length remained significant after additional adjustment for marital and socioeconomic status, smoking, body mass index, and morbidities (adjusted difference 0.044 relative units, standard error of the mean 0.017, p = 0.008.These data suggest that work-related exhaustion is related to the acceleration of the rate of biological aging. This hypothesis awaits confirmation in a prospective study measuring changes in relative telomere length over time.

[Epidemiological features of automobile traumatism in Russia and abroad].

Science.gov (United States)

Iakunin, S A

2007-01-01

The article presents updated epidemiological information on specific features and causes of high automobile traumatism in Russia and abroad for the last 5 years. The number of road accidents and road accident fatalities now not only present a great social-medical problem in Russia but also a problem of national security as road accident mortality is far ahead of the developed countries and showed no trend to lowering. This threatening situation is caused by out-of-date transport infrastructure, social factors, old cars without modern safety systems, absence of special emergency medical care for road accident victims. The experience of foreign countries on reducing road traumatism is analysed.

Method of controlling temperature of a thermoelectric generator in an exhaust system

Science.gov (United States)

Prior, Gregory P; Reynolds, Michael G; Cowgill, Joshua D

2013-05-21

A method of controlling the temperature of a thermoelectric generator (TEG) in an exhaust system of an engine is provided. The method includes determining the temperature of the heated side of the TEG, determining exhaust gas flow rate through the TEG, and determining the exhaust gas temperature through the TEG. A rate of change in temperature of the heated side of the TEG is predicted based on the determined temperature, the determined exhaust gas flow rate, and the determined exhaust gas temperature through the TEG. Using the predicted rate of change of temperature of the heated side, exhaust gas flow rate through the TEG is calculated that will result in a maximum temperature of the heated side of the TEG less than a predetermined critical temperature given the predicted rate of change in temperature of the heated side of the TEG. A corresponding apparatus is provided.

A knowledge-based system for controlling automobile traffic

Science.gov (United States)

Maravas, Alexander; Stengel, Robert F.

1994-01-01

Transportation network capacity variations arising from accidents, roadway maintenance activity, and special events as well as fluctuations in commuters' travel demands complicate traffic management. Artificial intelligence concepts and expert systems can be useful in framing policies for incident detection, congestion anticipation, and optimal traffic management. This paper examines the applicability of intelligent route guidance and control as decision aids for traffic management. Basic requirements for managing traffic are reviewed, concepts for studying traffic flow are introduced, and mathematical models for modeling traffic flow are examined. Measures for quantifying transportation network performance levels are chosen, and surveillance and control strategies are evaluated. It can be concluded that automated decision support holds great promise for aiding the efficient flow of automobile traffic over limited-access roadways, bridges, and tunnels.

30 CFR 36.43 - Determination of exhaust-gas composition.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Determination of exhaust-gas composition. 36.43... TRANSPORTATION EQUIPMENT Test Requirements § 36.43 Determination of exhaust-gas composition. (a) Samples shall be..., hydrogen, methane, nitrogen, oxides of nitrogen, and aldehydes, or any other constituent prescribed by MSHA...

A source-independent empirical correction procedure for the fast mobility and engine exhaust particle sizers

Science.gov (United States)

Zimmerman, Naomi; Jeong, Cheol-Heon; Wang, Jonathan M.; Ramos, Manuel; Wallace, James S.; Evans, Greg J.

2015-01-01

The TSI Fast Mobility Particle Sizer (FMPS) and Engine Exhaust Particle Sizer (EEPS) provide size distributions for 6-560 nm particles with a time resolution suitable for characterizing transient particle sources; however, the accuracy of these instruments can be source dependent, due to influences of particle morphology. The aim of this study was to develop a source-independent correction protocol for the FMPS and EEPS. The correction protocol consists of: (1) broadening the >80 nm size range of the distribution to account for under-sizing by the FMPS and EEPS; (2) applying an existing correction protocol in the 8-93 nm size range; and (3) dividing each size bin by the ratio of total concentration measured by the FMPS or EEPS and a water-based Condensation Particle Counter (CPC) as a surrogate scaling factor to account for particle morphology. Efficacy of the correction protocol was assessed for three sources: urban ambient air, diluted gasoline direct injection engine exhaust, and diluted diesel engine exhaust. Linear regression against a reference instrument, the Scanning Mobility Particle Sizer (SMPS), before and after applying the correction protocol demonstrated that the correction ensured agreement within 20%.

Evaluation of the Effect of Exhausts from Liquid and Solid Rockets on Ozone Layer

Science.gov (United States)

Yamagiwa, Yoshiki; Ishimaki, Tetsuya

This paper reports the analytical results of the influences of solid rocket and liquid rocket exhausts on ozone layer. It is worried about that the exhausts from solid propellant rockets cause the ozone depletion in the ozone layer. Some researchers try to develop the analytical model of ozone depletion by rocket exhausts to understand its physical phenomena and to find the effective design of rocket to minimize its effect. However, these models do not include the exhausts from liquid rocket although there are many cases to use solid rocket boosters with a liquid rocket at the same time in practical situations. We constructed combined analytical model include the solid rocket exhausts and liquid rocket exhausts to analyze their effects. From the analytical results, we find that the exhausts from liquid rocket suppress the ozone depletion by solid rocket exhausts.

A Low Cost Ferritic Stainless Steel Microalloyed by Higher Nb for Automotive Exhaust System

Science.gov (United States)

Chen, Erhu; Wang, Xuelin; Shang, Chengjia

Automotive engine exhaust gas after combustion of fuel, and the gas will be liquefied in the rear of automotive exhaust system. A lot of corrosive anions existing in the condensate make corrosion of the exhaust system materials. Therefore, once pitting perforation, automotive exhaust system will fail directly. In 1980s, automotive exhaust manifold was made of Si-Mo ductile iron, mufflers and the tail pipe were made of carbon steel or aluminized steel. But with higher emission standards carried out, the improvement of engine performance and the higher exhaust temperature as well as the needs of the automotive light-weighting, we need the higher corrosion resistance of the material for automotive exhaust systems to meet the requirements.

Application of mechatronics in the automobile; Mechatronik im Automobil

Energy Technology Data Exchange (ETDEWEB)

Lange, P.; Herrmann, R.

1996-04-01

The automotive electronics of the 90`s suffers from increasing performance and economical pressure. New solutions are necessary if the target `better performance at lower cost` has to be fulfilled in the future, as the integration of sub-assemblies on the mechanical and electronical levels is essentially exhausted. The mechatronics as a form of integration of mechanical and electronical functions appears to be one approach to this problem. Hella works on mechatronics mainly in the field of illumination and electro-mechanics/electronics. The article shows that mechatronics integration is possible with standard electronics design as well as PCB technology, but also with new technologies such as MID and microsystems technology. (orig.) [Deutsch] Die Automobilelektronik der neunziger Jahre steht unter starkem Leistungs- und Kostendruck. Um der Zielsetzung`bessere Produkte zu niedrigen Preisen` kuenftig gerecht zu werden, bedarf es neuer Loesungswege. Die Baugruppenintegration auf mechanischer und elektronischer Ebene ist weitestgehend ausgereizt. Die Mechatronik, Integration mechanischer und elektronischer Funktionen, scheint ein Loesungsansatz fuer diese Problemstellung zu sein. Bei Hella wird deshalb vorrangig auf den Gebieten der Beleuchtung und der Elektromechanik/Elektronik and Mechatonik-Loesungen gearbeitet. Sowohl mit Standard-Aufbautechniken der Elektronik wie der Leiterplattentechnik als auch mit neuartigen Techniken wie der MID- und Mikrosystemtechnik ist eine Mechatronikintegration moeglich. (orig.)

Non-thermal plasma exhaust aftertreatment: Are all plasmas the same?

Energy Technology Data Exchange (ETDEWEB)

Whealton, J.H.; Hanson, G.R.; Storey, J.M.; Raridon, R.J.; Armfield, J.S.; Bigelow, T.S.; Graves, R.L. [Oak Ridge National Lab., TN (United States)

1997-12-31

The authors describe initial experiments employing 5.5 GHz pulsed microwave power, which should result in enhanced chemistry compared to present state-of-the-art plasma aftertreatments by; reducing plasma electric field shielding, increasing availability of atomic nitrogen, exploiting surface charging of dielectrics, avoiding (low field) threshold initiated discharges, and achieving a higher high energy tail on the electron distribution function. As an example, the authors decided to test for NO reduction in N{sub 2}. While this reaction is not a complete description of the exhaust issues by any means, they thought it would demonstrate the technology proposed.

The Effect of the Arab Boycott on Israel: The Automobile Market

OpenAIRE

Chaim Fershtman; Neil Gandal

1996-01-01

Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel. This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market. In this paper, we examine the effect of the Arab economic boycott on this market. Using recent advances in estimating discrete-choice models of product differentiation, we estimate that had the boycott continued, the welfare los...

The Greenhouse Effect in a Vial.

Science.gov (United States)

Golden, Richard; Sneider, Cary

1989-01-01

Presents an example of a greenhouse-effect experiment from the Climate Protection Institute. Analyzes the amount of carbon dioxide in ambient air, human exhalation, automobile exhaust, and nearly pure carbon dioxide by titrating with ammonia and bromthymol blue. (MVL)

Lichen flora and ecology of the roadside trees

Energy Technology Data Exchange (ETDEWEB)

Rydzak, J

1972-01-01

Investigations of the lichen flora of roadside trees were carried out at 69 sites in eastern Poland in 1966-1969. Conclusive relationships between lichen distributions and air pollution from automobile exhaust gases could not be inferred from the data.